From: John Crispin Date: Thu, 10 Mar 2016 19:11:23 +0000 (+0000) Subject: brcm2708: update patches to latest version X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=f78f271c1e2845ce60ac8236505e6baff2b31620;p=openwrt%2Fstaging%2Fthess.git brcm2708: update patches to latest version As usual these patches were extracted from the raspberry repo: https://github.com/raspberrypi/linux/commits/rpi-4.4.y - Disable unused MFD RPISENSE driver. - Disable ethernet HW checksums in order to avoid kernel exceptions. Signed-off-by: Álvaro Fernández Rojas SVN-Revision: 48985 --- diff --git a/target/linux/brcm2708/modules.mk b/target/linux/brcm2708/modules.mk index 2802c1d758..04e6aa9233 100644 --- a/target/linux/brcm2708/modules.mk +++ b/target/linux/brcm2708/modules.mk @@ -274,7 +274,6 @@ define KernelPackage/spi-bcm2835 SUBMENU:=$(SPI_MENU) TITLE:=BCM2835 SPI controller driver KCONFIG:=\ - CONFIG_BCM2708_SPIDEV=n \ CONFIG_SPI=y \ CONFIG_SPI_BCM2835 \ CONFIG_SPI_MASTER=y @@ -293,7 +292,6 @@ define KernelPackage/spi-bcm2835-aux SUBMENU:=$(SPI_MENU) TITLE:=BCM2835 Aux SPI controller driver KCONFIG:=\ - CONFIG_BCM2708_SPIDEV=n \ CONFIG_SPI=y \ CONFIG_SPI_BCM2835AUX \ CONFIG_SPI_MASTER=y @@ -331,8 +329,7 @@ define KernelPackage/i2c-bcm2708 $(call i2c_defaults,$(I2C_BCM2708_MODULES),59) TITLE:=Broadcom BCM2708 I2C master controller driver KCONFIG+= \ - CONFIG_I2C_BCM2708_BAUDRATE=100000 \ - CONFIG_MFD_RPISENSE_CORE=n + CONFIG_I2C_BCM2708_BAUDRATE=100000 DEPENDS:=@TARGET_brcm2708 +kmod-i2c-core endef @@ -348,8 +345,6 @@ I2C_BCM2835_MODULES:=\ define KernelPackage/i2c-bcm2835 $(call i2c_defaults,$(I2C_BCM2835_MODULES),59) TITLE:=Broadcom BCM2835 I2C master controller driver - KCONFIG+= \ - CONFIG_MFD_RPISENSE_CORE=n DEPENDS:=@TARGET_brcm2708 +kmod-i2c-core endef diff --git a/target/linux/brcm2708/patches-4.4/0051-fdt-Add-support-for-the-CONFIG_CMDLINE_EXTEND-option.patch b/target/linux/brcm2708/patches-4.4/0051-fdt-Add-support-for-the-CONFIG_CMDLINE_EXTEND-option.patch old mode 100755 new mode 100644 diff --git a/target/linux/brcm2708/patches-4.4/0171-BCM270X_DT-Add-pi3-disable-bt-overlay.patch b/target/linux/brcm2708/patches-4.4/0171-BCM270X_DT-Add-pi3-disable-bt-overlay.patch new file mode 100644 index 0000000000..d00439eaa5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0171-BCM270X_DT-Add-pi3-disable-bt-overlay.patch @@ -0,0 +1,96 @@ +From 42a9bb566fe376a1add4b3780c1b830f64500faa Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 2 Mar 2016 10:59:05 +0000 +Subject: [PATCH 171/180] BCM270X_DT: Add pi3-disable-bt overlay + +Disable Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15. To disable +the systemd service that initialises the modem so it doesn't use the UART: + + sudo systemctl disable hciuart + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 8 ++++ + .../boot/dts/overlays/pi3-disable-bt-overlay.dts | 48 ++++++++++++++++++++++ + 3 files changed, 57 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -39,6 +39,7 @@ dtb-$(RPI_DT_OVERLAYS) += mcp2515-can0-o + dtb-$(RPI_DT_OVERLAYS) += mcp2515-can1-overlay.dtb + dtb-$(RPI_DT_OVERLAYS) += mmc-overlay.dtb + dtb-$(RPI_DT_OVERLAYS) += mz61581-overlay.dtb ++dtb-$(RPI_DT_OVERLAYS) += pi3-disable-bt-overlay.dtb + dtb-$(RPI_DT_OVERLAYS) += piscreen-overlay.dtb + dtb-$(RPI_DT_OVERLAYS) += piscreen2r-overlay.dtb + dtb-$(RPI_DT_OVERLAYS) += pitft28-capacitive-overlay.dtb +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -496,6 +496,14 @@ Params: speed Display + [ The pcf8563-rtc overlay has been deleted. See i2c-rtc. ] + + ++Name: pi3-disable-bt ++Info: Disable Pi3 Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15 ++ N.B. To disable the systemd service that initialises the modem so it ++ doesn't use the UART, use 'sudo systemctl disable hciuart'. ++Load: dtoverlay=pi3-disable-bt ++Params: ++ ++ + Name: piscreen + Info: PiScreen display by OzzMaker.com + Load: dtoverlay=piscreen,= +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts +@@ -0,0 +1,48 @@ ++/dts-v1/; ++/plugin/; ++ ++/* Disable Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15. ++ To disable the systemd service that initialises the modem so it doesn't use ++ the UART: ++ ++ sudo systemctl disable hciuart ++*/ ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&uart1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&uart0>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&gpio>; ++ __overlay__ { ++ uart0_pins: uart0_pins { ++ brcm,pins = <14 15>; ++ brcm,function = <4>; /* alt0 */ ++ brcm,pull = <0 2>; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "/aliases"; ++ __overlay__ { ++ serial0 = "/soc/uart@7e201000"; ++ serial1 = "/soc/uart@7e215040"; ++ }; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.4/0172-BCM270X_DT-Add-pi3-miniuart-bt-DT-overlay.patch b/target/linux/brcm2708/patches-4.4/0172-BCM270X_DT-Add-pi3-miniuart-bt-DT-overlay.patch new file mode 100644 index 0000000000..3e1031c109 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0172-BCM270X_DT-Add-pi3-miniuart-bt-DT-overlay.patch @@ -0,0 +1,117 @@ +From 3b93a5e60a2272bea6b50561c6e871dde5295dfb Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 7 Mar 2016 09:53:03 +0000 +Subject: [PATCH 172/180] BCM270X_DT: Add pi3-miniuart-bt DT overlay + +Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore +UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum +usable baudrate. + +It is also necessary to edit /lib/systemd/system/hciuart.server and +replace ttyAMA0 with ttyS0. + +If cmdline.txt uses the alias serial0 to refer to the user-accessable port +then the firmware will replace with the appropriate port whether or not +this overlay is used. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 10 ++++ + .../boot/dts/overlays/pi3-miniuart-bt-overlay.dts | 61 ++++++++++++++++++++++ + 3 files changed, 72 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -40,6 +40,7 @@ dtb-$(RPI_DT_OVERLAYS) += mcp2515-can1-o + dtb-$(RPI_DT_OVERLAYS) += mmc-overlay.dtb + dtb-$(RPI_DT_OVERLAYS) += mz61581-overlay.dtb + dtb-$(RPI_DT_OVERLAYS) += pi3-disable-bt-overlay.dtb ++dtb-$(RPI_DT_OVERLAYS) += pi3-miniuart-bt-overlay.dtb + dtb-$(RPI_DT_OVERLAYS) += piscreen-overlay.dtb + dtb-$(RPI_DT_OVERLAYS) += piscreen2r-overlay.dtb + dtb-$(RPI_DT_OVERLAYS) += pitft28-capacitive-overlay.dtb +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -504,6 +504,16 @@ Load: dtoverlay=pi3-disable-bt + Params: + + ++Name: pi3-miniuart-bt ++Info: Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore ++ UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum ++ usable baudrate. ++ N.B. It is also necessary to edit /lib/systemd/system/hciuart.server ++ and replace ttyAMA0 with ttyS0. ++Load: dtoverlay=pi3-miniuart-bt ++Params: ++ ++ + Name: piscreen + Info: PiScreen display by OzzMaker.com + Load: dtoverlay=piscreen,= +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts +@@ -0,0 +1,61 @@ ++/dts-v1/; ++/plugin/; ++ ++/* Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore ++ UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum ++ usable baudrate. ++ ++ It is also necessary to edit /lib/systemd/system/hciuart.server and ++ replace ttyAMA0 with ttyS0. ++ ++ If cmdline.txt uses the alias serial0 to refer to the user-accessable port ++ then the firmware will replace with the appropriate port whether or not ++ this overlay is used. ++*/ ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&uart0>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&uart1>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&gpio>; ++ __overlay__ { ++ uart0_pins: uart0_pins { ++ brcm,pins = <14 15>; ++ brcm,function = <4>; /* alt0 */ ++ brcm,pull = <0 2>; ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins = <32 33>; ++ brcm,function = <2>; /* alt5=UART1 */ ++ brcm,pull = <0 0>; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "/aliases"; ++ __overlay__ { ++ serial0 = "/soc/uart@7e201000"; ++ serial1 = "/soc/uart@7e215040"; ++ }; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.4/0173-Pi3-DT-Add-dtparams-for-the-SD-interface.patch b/target/linux/brcm2708/patches-4.4/0173-Pi3-DT-Add-dtparams-for-the-SD-interface.patch new file mode 100644 index 0000000000..f9e4767f8a --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0173-Pi3-DT-Add-dtparams-for-the-SD-interface.patch @@ -0,0 +1,25 @@ +From c8b56d0359160d2aec2ab3168ef9d7c080ae9841 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 7 Mar 2016 13:38:39 +0000 +Subject: [PATCH 173/180] Pi3 DT: Add dtparams for the SD interface + +Add new base dtparams sd_overclock, sd_force_pio, sd_pio_limit +and sd_debug. These were missed out of the initial Pi3 DTB. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -188,5 +188,9 @@ + audio = <&audio>,"status"; + watchdog = <&watchdog>,"status"; + random = <&random>,"status"; ++ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; ++ sd_force_pio = <&sdhost>,"brcm,force-pio?"; ++ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; ++ sd_debug = <&sdhost>,"brcm,debug"; + }; + }; diff --git a/target/linux/brcm2708/patches-4.4/0174-vchiq_arm-Tweak-the-logging-output.patch b/target/linux/brcm2708/patches-4.4/0174-vchiq_arm-Tweak-the-logging-output.patch new file mode 100644 index 0000000000..536c6ce2bc --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0174-vchiq_arm-Tweak-the-logging-output.patch @@ -0,0 +1,75 @@ +From 48f3f7707a43b019e14216cec7376eba21972f9b Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 7 Mar 2016 15:05:11 +0000 +Subject: [PATCH 174/180] vchiq_arm: Tweak the logging output + +Signed-off-by: Phil Elwell +--- + .../vc04_services/interface/vchiq_arm/vchiq_core.c | 31 +++++++++------------- + 1 file changed, 13 insertions(+), 18 deletions(-) + +--- a/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c ++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c +@@ -891,16 +891,14 @@ queue_message(VCHIQ_STATE_T *state, VCHI + error_count); + return VCHIQ_ERROR; + } +- if (i == 0) { +- if (SRVTRACE_ENABLED(service, +- VCHIQ_LOG_INFO)) +- vchiq_log_dump_mem("Sent", 0, +- header->data + pos, +- min(64u, +- elements[0].size)); +- } + } + ++ if (SRVTRACE_ENABLED(service, ++ VCHIQ_LOG_INFO)) ++ vchiq_log_dump_mem("Sent", 0, ++ header->data, ++ min(16, pos)); ++ + spin_lock("a_spinlock); + service_quota->message_use_count++; + +@@ -1039,16 +1037,13 @@ queue_message_sync(VCHIQ_STATE_T *state, + error_count); + return VCHIQ_ERROR; + } +- if (i == 0) { +- if (vchiq_sync_log_level >= +- VCHIQ_LOG_TRACE) +- vchiq_log_dump_mem("Sent Sync", +- 0, header->data + pos, +- min(64u, +- elements[0].size)); +- } + } + ++ if (vchiq_sync_log_level >= VCHIQ_LOG_TRACE) ++ vchiq_log_dump_mem("Sent Sync", ++ 0, header->data, ++ min(16, pos)); ++ + VCHIQ_SERVICE_STATS_INC(service, ctrl_tx_count); + VCHIQ_SERVICE_STATS_ADD(service, ctrl_tx_bytes, size); + } else { +@@ -1720,7 +1715,7 @@ parse_rx_slots(VCHIQ_STATE_T *state) + remoteport, localport, size); + if (size > 0) + vchiq_log_dump_mem("Rcvd", 0, header->data, +- min(64, size)); ++ min(16, size)); + } + + if (((unsigned int)header & VCHIQ_SLOT_MASK) + calc_stride(size) +@@ -2187,7 +2182,7 @@ sync_func(void *v) + remoteport, localport, size); + if (size > 0) + vchiq_log_dump_mem("Rcvd", 0, header->data, +- min(64, size)); ++ min(16, size)); + } + + switch (type) { diff --git a/target/linux/brcm2708/patches-4.4/0175-bcm2835-sdhost-Only-claim-one-DMA-channel.patch b/target/linux/brcm2708/patches-4.4/0175-bcm2835-sdhost-Only-claim-one-DMA-channel.patch new file mode 100644 index 0000000000..fb68bcb5f8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0175-bcm2835-sdhost-Only-claim-one-DMA-channel.patch @@ -0,0 +1,160 @@ +From 06c169985c0884ce67377c79d27383e23f41e2cd Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 7 Mar 2016 16:46:39 +0000 +Subject: [PATCH 175/180] bcm2835-sdhost: Only claim one DMA channel + +With both MMC controllers enabled there are few DMA channels left. The +bcm2835-sdhost driver only uses DMA in one direction at a time, so it +doesn't need to claim two channels. + +See: https://github.com/raspberrypi/linux/issues/1327 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2708_common.dtsi | 5 +-- + drivers/mmc/host/bcm2835-sdhost.c | 70 ++++++++++++++++++++++++----------- + 2 files changed, 50 insertions(+), 25 deletions(-) + +--- a/arch/arm/boot/dts/bcm2708_common.dtsi ++++ b/arch/arm/boot/dts/bcm2708_common.dtsi +@@ -136,9 +136,8 @@ + reg = <0x7e202000 0x100>; + interrupts = <2 24>; + clocks = <&clk_core>; +- dmas = <&dma 13>, +- <&dma 13>; +- dma-names = "tx", "rx"; ++ dmas = <&dma 13>; ++ dma-names = "rx-tx"; + brcm,overclock-50 = <0>; + brcm,pio-limit = <1>; + status = "disabled"; +--- a/drivers/mmc/host/bcm2835-sdhost.c ++++ b/drivers/mmc/host/bcm2835-sdhost.c +@@ -185,9 +185,10 @@ struct bcm2835_host { + unsigned int debug:1; /* Enable debug output */ + + /*DMA part*/ +- struct dma_chan *dma_chan_rx; /* DMA channel for reads */ +- struct dma_chan *dma_chan_tx; /* DMA channel for writes */ +- struct dma_chan *dma_chan; /* Channel in used */ ++ struct dma_chan *dma_chan_rxtx; /* DMA channel for reads and writes */ ++ struct dma_chan *dma_chan; /* Channel in use */ ++ struct dma_slave_config dma_cfg_rx; ++ struct dma_slave_config dma_cfg_tx; + struct dma_async_tx_descriptor *dma_desc; + u32 dma_dir; + u32 drain_words; +@@ -771,12 +772,11 @@ static void bcm2835_sdhost_prepare_dma(s + log_event("PRD<", (u32)data, 0); + pr_debug("bcm2835_sdhost_prepare_dma()\n"); + ++ dma_chan = host->dma_chan_rxtx; + if (data->flags & MMC_DATA_READ) { +- dma_chan = host->dma_chan_rx; + dir_data = DMA_FROM_DEVICE; + dir_slave = DMA_DEV_TO_MEM; + } else { +- dma_chan = host->dma_chan_tx; + dir_data = DMA_TO_DEVICE; + dir_slave = DMA_MEM_TO_DEV; + } +@@ -813,6 +813,12 @@ static void bcm2835_sdhost_prepare_dma(s + host->drain_words = len/4; + } + ++ /* The parameters have already been validated, so this will not fail */ ++ (void)dmaengine_slave_config(dma_chan, ++ (dir_data == DMA_FROM_DEVICE) ? ++ &host->dma_cfg_rx : ++ &host->dma_cfg_tx); ++ + len = dma_map_sg(dma_chan->device->dev, data->sg, data->sg_len, + dir_data); + +@@ -1805,28 +1811,46 @@ int bcm2835_sdhost_add_host(struct bcm28 + spin_lock_init(&host->lock); + + if (host->allow_dma) { +- if (IS_ERR_OR_NULL(host->dma_chan_tx) || +- IS_ERR_OR_NULL(host->dma_chan_rx)) { +- pr_err("%s: unable to initialise DMA channels. " ++ if (IS_ERR_OR_NULL(host->dma_chan_rxtx)) { ++ pr_err("%s: unable to initialise DMA channel. " + "Falling back to PIO\n", + mmc_hostname(mmc)); + host->use_dma = false; + } else { +- host->use_dma = true; +- + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.slave_id = 13; /* DREQ channel */ + ++ /* Validate the slave configurations */ ++ + cfg.direction = DMA_MEM_TO_DEV; + cfg.src_addr = 0; + cfg.dst_addr = host->bus_addr + SDDATA; +- ret = dmaengine_slave_config(host->dma_chan_tx, &cfg); + +- cfg.direction = DMA_DEV_TO_MEM; +- cfg.src_addr = host->bus_addr + SDDATA; +- cfg.dst_addr = 0; +- ret = dmaengine_slave_config(host->dma_chan_rx, &cfg); ++ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); ++ ++ if (ret == 0) { ++ host->dma_cfg_tx = cfg; ++ ++ cfg.direction = DMA_DEV_TO_MEM; ++ cfg.src_addr = host->bus_addr + SDDATA; ++ cfg.dst_addr = 0; ++ ++ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); ++ } ++ ++ if (ret == 0) { ++ host->dma_cfg_rx = cfg; ++ ++ host->use_dma = true; ++ } else { ++ pr_err("%s: unable to configure DMA channel. " ++ "Falling back to PIO\n", ++ mmc_hostname(mmc)); ++ dma_release_channel(host->dma_chan_rxtx); ++ host->dma_chan_rxtx = NULL; ++ host->use_dma = false; ++ } + } + } else { + host->use_dma = false; +@@ -1948,19 +1972,21 @@ static int bcm2835_sdhost_probe(struct p + + if (host->allow_dma) { + if (node) { +- host->dma_chan_tx = +- dma_request_slave_channel(dev, "tx"); +- host->dma_chan_rx = +- dma_request_slave_channel(dev, "rx"); ++ host->dma_chan_rxtx = ++ dma_request_slave_channel(dev, "rx-tx"); ++ if (!host->dma_chan_rxtx) ++ host->dma_chan_rxtx = ++ dma_request_slave_channel(dev, "tx"); ++ if (!host->dma_chan_rxtx) ++ host->dma_chan_rxtx = ++ dma_request_slave_channel(dev, "rx"); + } else { + dma_cap_mask_t mask; + + dma_cap_zero(mask); + /* we don't care about the channel, any would work */ + dma_cap_set(DMA_SLAVE, mask); +- host->dma_chan_tx = +- dma_request_channel(mask, NULL, NULL); +- host->dma_chan_rx = ++ host->dma_chan_rxtx = + dma_request_channel(mask, NULL, NULL); + } + } diff --git a/target/linux/brcm2708/patches-4.4/0176-bcm2835-mmc-Only-claim-one-DMA-channel.patch b/target/linux/brcm2708/patches-4.4/0176-bcm2835-mmc-Only-claim-one-DMA-channel.patch new file mode 100644 index 0000000000..8f224faf88 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0176-bcm2835-mmc-Only-claim-one-DMA-channel.patch @@ -0,0 +1,170 @@ +From af80d75abc7604cd9eb1788b0171148d000db09d Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 8 Mar 2016 09:49:16 +0000 +Subject: [PATCH 176/180] bcm2835-mmc: Only claim one DMA channel + +With both MMC controllers enabled there are few DMA channels left. The +bcm2835-mmc driver only uses DMA in one direction at a time, so it +doesn't need to claim two channels. + +See: https://github.com/raspberrypi/linux/issues/1327 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2708_common.dtsi | 5 +-- + drivers/mmc/host/bcm2835-mmc.c | 69 +++++++++++++++++++++++++---------- + 2 files changed, 51 insertions(+), 23 deletions(-) + +--- a/arch/arm/boot/dts/bcm2708_common.dtsi ++++ b/arch/arm/boot/dts/bcm2708_common.dtsi +@@ -232,9 +232,8 @@ + reg = <0x7e300000 0x100>; + interrupts = <2 30>; + clocks = <&clk_mmc>; +- dmas = <&dma 11>, +- <&dma 11>; +- dma-names = "tx", "rx"; ++ dmas = <&dma 11>; ++ dma-names = "rx-tx"; + brcm,overclock-50 = <0>; + status = "disabled"; + }; +--- a/drivers/mmc/host/bcm2835-mmc.c ++++ b/drivers/mmc/host/bcm2835-mmc.c +@@ -108,8 +108,9 @@ struct bcm2835_host { + u32 shadow; + + /*DMA part*/ +- struct dma_chan *dma_chan_rx; /* DMA channel for reads */ +- struct dma_chan *dma_chan_tx; /* DMA channel for writes */ ++ struct dma_chan *dma_chan_rxtx; /* DMA channel for reads and writes */ ++ struct dma_slave_config dma_cfg_rx; ++ struct dma_slave_config dma_cfg_tx; + struct dma_async_tx_descriptor *tx_desc; /* descriptor */ + + bool have_dma; +@@ -342,7 +343,7 @@ static void bcm2835_mmc_dma_complete(voi + + if (host->data && !(host->data->flags & MMC_DATA_WRITE)) { + /* otherwise handled in SDHCI IRQ */ +- dma_chan = host->dma_chan_rx; ++ dma_chan = host->dma_chan_rxtx; + dir_data = DMA_FROM_DEVICE; + + dma_unmap_sg(dma_chan->device->dev, +@@ -493,16 +494,21 @@ static void bcm2835_mmc_transfer_dma(str + if (host->blocks == 0) + return; + ++ dma_chan = host->dma_chan_rxtx; + if (host->data->flags & MMC_DATA_READ) { +- dma_chan = host->dma_chan_rx; + dir_data = DMA_FROM_DEVICE; + dir_slave = DMA_DEV_TO_MEM; + } else { +- dma_chan = host->dma_chan_tx; + dir_data = DMA_TO_DEVICE; + dir_slave = DMA_MEM_TO_DEV; + } + ++ /* The parameters have already been validated, so this will not fail */ ++ (void)dmaengine_slave_config(dma_chan, ++ (dir_data == DMA_FROM_DEVICE) ? ++ &host->dma_cfg_rx : ++ &host->dma_cfg_tx); ++ + BUG_ON(!dma_chan->device); + BUG_ON(!dma_chan->device->dev); + BUG_ON(!host->data->sg); +@@ -936,7 +942,7 @@ static void bcm2835_mmc_data_irq(struct + if (host->data->flags & MMC_DATA_WRITE) { + /* IRQ handled here */ + +- dma_chan = host->dma_chan_tx; ++ dma_chan = host->dma_chan_rxtx; + dir_data = DMA_TO_DEVICE; + dma_unmap_sg(dma_chan->device->dev, + host->data->sg, host->data->sg_len, +@@ -1316,28 +1322,47 @@ static int bcm2835_mmc_add_host(struct b + dev_info(dev, "Forcing PIO mode\n"); + host->have_dma = false; + #else +- if (IS_ERR_OR_NULL(host->dma_chan_tx) || +- IS_ERR_OR_NULL(host->dma_chan_rx)) { +- dev_err(dev, "%s: Unable to initialise DMA channels. Falling back to PIO\n", ++ if (IS_ERR_OR_NULL(host->dma_chan_rxtx)) { ++ dev_err(dev, "%s: Unable to initialise DMA channel. Falling back to PIO\n", + DRIVER_NAME); + host->have_dma = false; + } else { +- dev_info(dev, "DMA channels allocated"); +- host->have_dma = true; ++ dev_info(dev, "DMA channel allocated"); + + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.slave_id = 11; /* DREQ channel */ + ++ /* Validate the slave configurations */ ++ + cfg.direction = DMA_MEM_TO_DEV; + cfg.src_addr = 0; + cfg.dst_addr = host->bus_addr + SDHCI_BUFFER; +- ret = dmaengine_slave_config(host->dma_chan_tx, &cfg); + +- cfg.direction = DMA_DEV_TO_MEM; +- cfg.src_addr = host->bus_addr + SDHCI_BUFFER; +- cfg.dst_addr = 0; +- ret = dmaengine_slave_config(host->dma_chan_rx, &cfg); ++ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); ++ ++ if (ret == 0) { ++ host->dma_cfg_tx = cfg; ++ ++ cfg.direction = DMA_DEV_TO_MEM; ++ cfg.src_addr = host->bus_addr + SDHCI_BUFFER; ++ cfg.dst_addr = 0; ++ ++ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); ++ } ++ ++ if (ret == 0) { ++ host->dma_cfg_rx = cfg; ++ ++ host->use_dma = true; ++ } else { ++ pr_err("%s: unable to configure DMA channel. " ++ "Faling back to PIO\n", ++ mmc_hostname(mmc)); ++ dma_release_channel(host->dma_chan_rxtx); ++ host->dma_chan_rxtx = NULL; ++ host->use_dma = false; ++ } + } + #endif + mmc->max_segs = 128; +@@ -1416,16 +1441,20 @@ static int bcm2835_mmc_probe(struct plat + + #ifndef FORCE_PIO + if (node) { +- host->dma_chan_tx = dma_request_slave_channel(dev, "tx"); +- host->dma_chan_rx = dma_request_slave_channel(dev, "rx"); ++ host->dma_chan_rxtx = dma_request_slave_channel(dev, "rx-tx"); ++ if (!host->dma_chan_rxtx) ++ host->dma_chan_rxtx = ++ dma_request_slave_channel(dev, "tx"); ++ if (!host->dma_chan_rxtx) ++ host->dma_chan_rxtx = ++ dma_request_slave_channel(dev, "rx"); + } else { + dma_cap_mask_t mask; + + dma_cap_zero(mask); + /* we don't care about the channel, any would work */ + dma_cap_set(DMA_SLAVE, mask); +- host->dma_chan_tx = dma_request_channel(mask, NULL, NULL); +- host->dma_chan_rx = dma_request_channel(mask, NULL, NULL); ++ host->dma_chan_rxtx = dma_request_channel(mask, NULL, NULL); + } + #endif + clk = devm_clk_get(dev, NULL); diff --git a/target/linux/brcm2708/patches-4.4/0177-config-rebuild-with-savedefconfig.patch b/target/linux/brcm2708/patches-4.4/0177-config-rebuild-with-savedefconfig.patch new file mode 100644 index 0000000000..34eedc1076 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0177-config-rebuild-with-savedefconfig.patch @@ -0,0 +1,28 @@ +From 0b65dbd40ad6b3d7cc979e8b7817f74b823f66ef Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Tue, 8 Mar 2016 17:08:39 +0000 +Subject: [PATCH 177/180] config: rebuild with savedefconfig + +--- + arch/arm/configs/bcm2709_defconfig | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -593,7 +593,6 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y + CONFIG_SERIAL_OF_PLATFORM=y + CONFIG_TTY_PRINTK=y + CONFIG_HW_RANDOM=y +-CONFIG_HW_RANDOM_BCM2835=y + CONFIG_RAW_DRIVER=y + CONFIG_I2C=y + CONFIG_I2C_CHARDEV=m +@@ -1112,7 +1111,7 @@ CONFIG_EXTCON=m + CONFIG_EXTCON_ARIZONA=m + CONFIG_IIO=m + CONFIG_IIO_BUFFER=y +-CONFIG_IIO_BUFFER_CB=y ++CONFIG_IIO_BUFFER_CB=m + CONFIG_IIO_KFIFO_BUF=m + CONFIG_MCP320X=m + CONFIG_DHT11=m diff --git a/target/linux/brcm2708/patches-4.4/0178-config-Add-module-for-mcp3422-ADC.patch b/target/linux/brcm2708/patches-4.4/0178-config-Add-module-for-mcp3422-ADC.patch new file mode 100644 index 0000000000..d6c1a75fa8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0178-config-Add-module-for-mcp3422-ADC.patch @@ -0,0 +1,30 @@ +From 1e19acaf4b88ee6dcbe8843a07a04edf177be7c3 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Tue, 8 Mar 2016 17:06:33 +0000 +Subject: [PATCH 178/180] config: Add module for mcp3422 ADC + +--- + arch/arm/configs/bcm2709_defconfig | 1 + + arch/arm/configs/bcmrpi_defconfig | 1 + + 2 files changed, 2 insertions(+) + +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -1114,6 +1114,7 @@ CONFIG_IIO_BUFFER=y + CONFIG_IIO_BUFFER_CB=m + CONFIG_IIO_KFIFO_BUF=m + CONFIG_MCP320X=m ++CONFIG_MCP3422=m + CONFIG_DHT11=m + CONFIG_PWM_BCM2835=m + CONFIG_RASPBERRYPI_FIRMWARE=y +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -1121,6 +1121,7 @@ CONFIG_IIO_BUFFER=y + CONFIG_IIO_BUFFER_CB=m + CONFIG_IIO_KFIFO_BUF=m + CONFIG_MCP320X=m ++CONFIG_MCP3422=m + CONFIG_DHT11=m + CONFIG_PWM_BCM2835=m + CONFIG_RASPBERRYPI_FIRMWARE=y diff --git a/target/linux/brcm2708/patches-4.4/0179-Pi3-DT-Add-pull-ups-on-the-UART-RX-lines.patch b/target/linux/brcm2708/patches-4.4/0179-Pi3-DT-Add-pull-ups-on-the-UART-RX-lines.patch new file mode 100644 index 0000000000..794a7bb4d5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/0179-Pi3-DT-Add-pull-ups-on-the-UART-RX-lines.patch @@ -0,0 +1,40 @@ +From e064caf725672cb95cc8327f4dc55d3de257cd74 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 8 Mar 2016 16:18:57 +0000 +Subject: [PATCH 179/180] Pi3 DT: Add pull-ups on the UART RX lines + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 4 ++-- + arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts | 2 +- + 2 files changed, 3 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -53,13 +53,13 @@ + uart0_pins: uart0_pins { + brcm,pins = <32 33>; + brcm,function = <7>; /* alt3=UART0 */ +- brcm,pull = <0 0>; ++ brcm,pull = <0 2>; + }; + + uart1_pins: uart1_pins { + brcm,pins = <14 15>; + brcm,function = <2>; /* alt5=UART1 */ +- brcm,pull = <0 0>; ++ brcm,pull = <0 2>; + }; + }; + +--- a/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts +@@ -46,7 +46,7 @@ + uart1_pins: uart1_pins { + brcm,pins = <32 33>; + brcm,function = <2>; /* alt5=UART1 */ +- brcm,pull = <0 0>; ++ brcm,pull = <0 2>; + }; + }; + }; diff --git a/target/linux/brcm2708/patches-4.4/1000-mfd-rpisense-disable.patch b/target/linux/brcm2708/patches-4.4/1000-mfd-rpisense-disable.patch new file mode 100644 index 0000000000..164e8447f6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/1000-mfd-rpisense-disable.patch @@ -0,0 +1,10 @@ +--- a/drivers/mfd/Kconfig ++++ b/drivers/mfd/Kconfig +@@ -13,6 +13,7 @@ config MFD_CORE + config MFD_RPISENSE_CORE + tristate "Raspberry Pi Sense HAT core functions" + depends on I2C ++ depends on BROKEN + select MFD_CORE + help + This is the core driver for the Raspberry Pi Sense HAT. This provides diff --git a/target/linux/brcm2708/patches-4.4/1001-smsc95xx-disable-hw-csum.patch b/target/linux/brcm2708/patches-4.4/1001-smsc95xx-disable-hw-csum.patch new file mode 100644 index 0000000000..eff1f0049c --- /dev/null +++ b/target/linux/brcm2708/patches-4.4/1001-smsc95xx-disable-hw-csum.patch @@ -0,0 +1,11 @@ +--- a/drivers/net/usb/smsc95xx.c ++++ b/drivers/net/usb/smsc95xx.c +@@ -42,7 +42,7 @@ + #define LAN95XX_EEPROM_MAGIC (0x9500) + #define EEPROM_MAC_OFFSET (0x01) + #define DEFAULT_TX_CSUM_ENABLE (true) +-#define DEFAULT_RX_CSUM_ENABLE (true) ++#define DEFAULT_RX_CSUM_ENABLE (false) + #define SMSC95XX_INTERNAL_PHY_ID (1) + #define SMSC95XX_TX_OVERHEAD (8) + #define SMSC95XX_TX_OVERHEAD_CSUM (12)