From: Felix Fietkau <nbd@nbd.name>
Date: Sat, 21 May 2016 17:09:59 +0000 (+0200)
Subject: mvebu: enable core drivers in the kernel config instead of packaging them
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=f849c2c83247340d623fdb549e2b75f4c1feea62;p=openwrt%2Fstaging%2Fzorun.git

mvebu: enable core drivers in the kernel config instead of packaging them

Simplify profile package selection

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---

diff --git a/package/kernel/linux/modules/block.mk b/package/kernel/linux/modules/block.mk
index 0c8d9b1fe9..d7f5ca4762 100644
--- a/package/kernel/linux/modules/block.mk
+++ b/package/kernel/linux/modules/block.mk
@@ -65,7 +65,7 @@ define KernelPackage/ata-ahci-platform
     $(LINUX_DIR)/drivers/ata/ahci_platform.ko \
     $(LINUX_DIR)/drivers/ata/libahci_platform.ko
   AUTOLOAD:=$(call AutoLoad,40,libahci libahci_platform ahci_platform,1)
-  $(call AddDepends/ata,@TARGET_ipq806x||TARGET_mvebu||TARGET_sunxi)
+  $(call AddDepends/ata,@TARGET_ipq806x||TARGET_sunxi)
 endef
 
 define KernelPackage/ata-ahci-platform/description
@@ -124,22 +124,6 @@ endef
 $(eval $(call KernelPackage,ata-marvell-sata))
 
 
-define KernelPackage/ata-mvebu-ahci
-  TITLE:=Marvell EBU AHCI support
-  DEPENDS:=@TARGET_mvebu +kmod-ata-ahci-platform
-  KCONFIG:=CONFIG_AHCI_MVEBU
-  FILES:=$(LINUX_DIR)/drivers/ata/ahci_mvebu.ko
-  AUTOLOAD:=$(call AutoLoad,41,ahci_mvebu,1)
-  $(call AddDepends/ata)
-endef
-
-define KernelPackage/ata-mvebu-ahci/description
- AHCI support for Marvell EBU SoCs
-endef
-
-$(eval $(call KernelPackage,ata-mvebu-ahci))
-
-
 define KernelPackage/ata-nvidia-sata
   TITLE:=Nvidia Serial ATA support
   KCONFIG:=CONFIG_SATA_NV
diff --git a/package/kernel/linux/modules/crypto.mk b/package/kernel/linux/modules/crypto.mk
index e144d64dfb..bea05488ab 100644
--- a/package/kernel/linux/modules/crypto.mk
+++ b/package/kernel/linux/modules/crypto.mk
@@ -666,7 +666,7 @@ $(eval $(call KernelPackage,crypto-xts))
 
 define KernelPackage/crypto-mv-cesa
   TITLE:=Marvell crypto engine
-  DEPENDS:=+kmod-crypto-manager @TARGET_kirkwood||TARGET_orion||TARGET_mvebu
+  DEPENDS:=+kmod-crypto-manager @TARGET_kirkwood||TARGET_orion
   KCONFIG:=CONFIG_CRYPTO_DEV_MV_CESA
   FILES:=$(LINUX_DIR)/drivers/crypto/mv_cesa.ko
   AUTOLOAD:=$(call AutoLoad,09,mv_cesa)
diff --git a/package/kernel/linux/modules/i2c.mk b/package/kernel/linux/modules/i2c.mk
index d4effee13d..e1c65d493e 100644
--- a/package/kernel/linux/modules/i2c.mk
+++ b/package/kernel/linux/modules/i2c.mk
@@ -140,7 +140,7 @@ I2C_MV64XXX_MODULES:=\
 define KernelPackage/i2c-mv64xxx
   $(call i2c_defaults,$(I2C_MV64XXX_MODULES),59)
   TITLE:=Orion Platform I2C interface support
-  DEPENDS:=@TARGET_kirkwood||TARGET_orion||TARGET_mvebu +kmod-i2c-core
+  DEPENDS:=@TARGET_kirkwood||TARGET_orion +kmod-i2c-core
 endef
 
 define KernelPackage/i2c-mv64xxx/description
diff --git a/package/kernel/linux/modules/leds.mk b/package/kernel/linux/modules/leds.mk
index c4261d31ac..aea62902ac 100644
--- a/package/kernel/linux/modules/leds.mk
+++ b/package/kernel/linux/modules/leds.mk
@@ -197,19 +197,3 @@ define KernelPackage/leds-pca963x/description
 endef
 
 $(eval $(call KernelPackage,leds-pca963x))
-
-
-define KernelPackage/leds-tlc591xx
-  SUBMENU:=$(LEDS_MENU)
-  TITLE:=TLC591xx LED support
-  DEPENDS:=@TARGET_mvebu +kmod-i2c-core +kmod-regmap
-  KCONFIG:=CONFIG_LEDS_TLC591XX
-  FILES:=$(LINUX_DIR)/drivers/leds/leds-tlc591xx.ko
-  AUTOLOAD:=$(call AutoLoad,60,leds-tlc591xx,1)
-endef
-
-define KernelPackage/leds-tlc591xx/description
- Kernel module for LEDs on TLC591xx
-endef
-
-$(eval $(call KernelPackage,leds-tlc591xx))
diff --git a/package/kernel/linux/modules/other.mk b/package/kernel/linux/modules/other.mk
index 98e77bfbbd..98b7f54dcf 100644
--- a/package/kernel/linux/modules/other.mk
+++ b/package/kernel/linux/modules/other.mk
@@ -501,7 +501,7 @@ $(eval $(call KernelPackage,wdt-omap))
 define KernelPackage/wdt-orion
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Marvell Orion Watchdog timer
-  DEPENDS:=@TARGET_orion||TARGET_kirkwood||TARGET_mvebu
+  DEPENDS:=@TARGET_orion||TARGET_kirkwood
   KCONFIG:=CONFIG_ORION_WATCHDOG
   FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/orion_wdt.ko
   AUTOLOAD:=$(call AutoLoad,50,orion_wdt,1)
@@ -585,7 +585,7 @@ $(eval $(call KernelPackage,rtc-isl1208))
 define KernelPackage/rtc-marvell
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Marvell SoC built-in RTC support
-  DEPENDS:=@RTC_SUPPORT @TARGET_kirkwood||TARGET_orion||TARGET_mvebu
+  DEPENDS:=@RTC_SUPPORT @TARGET_kirkwood||TARGET_orion
   KCONFIG:=CONFIG_RTC_DRV_MV \
 	CONFIG_RTC_CLASS=y
   FILES:=$(LINUX_DIR)/drivers/rtc/rtc-mv.ko
@@ -599,23 +599,6 @@ endef
 $(eval $(call KernelPackage,rtc-marvell))
 
 
-define KernelPackage/rtc-armada38x
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=Marvell Armada 38x SoC built-in RTC support
-  DEPENDS:=@RTC_SUPPORT @TARGET_mvebu
-  KCONFIG:=CONFIG_RTC_DRV_ARMADA38X \
-	CONFIG_RTC_CLASS=y
-  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-armada38x.ko
-  AUTOLOAD:=$(call AutoProbe,rtc-armada38x)
-endef
-
-define KernelPackage/rtc-armada38x/description
- Kernel module for Marvell Armada 38x SoC built-in RTC.
-endef
-
-$(eval $(call KernelPackage,rtc-armada38x))
-
-
 define KernelPackage/rtc-pcf8563
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Philips PCF8563/Epson RTC8564 RTC support
@@ -794,7 +777,7 @@ $(eval $(call KernelPackage,zram))
 define KernelPackage/mvsdio
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Marvell SDIO support
-  DEPENDS:=@TARGET_orion||TARGET_kirkwood||TARGET_mvebu +kmod-mmc
+  DEPENDS:=@TARGET_orion||TARGET_kirkwood +kmod-mmc
   KCONFIG:=CONFIG_MMC_MVSDIO
   FILES:=$(LINUX_DIR)/drivers/mmc/host/mvsdio.ko
   AUTOLOAD:=$(call AutoProbe,mvsdio)
@@ -922,23 +905,6 @@ endef
 $(eval $(call KernelPackage,thermal))
 
 
-define KernelPackage/thermal-armada
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=Armada 370/XP thermal management
-  DEPENDS:=@TARGET_mvebu +kmod-thermal
-  KCONFIG:=CONFIG_ARMADA_THERMAL
-  FILES:=$(LINUX_DIR)/drivers/thermal/armada_thermal.ko
-  AUTOLOAD:=$(call AutoProbe,armada_thermal)
-endef
-
-define KernelPackage/thermal-armada/description
- Enable this module if you want to have support for thermal management
- controller present in Armada 370 and Armada XP SoC.
-endef
-
-$(eval $(call KernelPackage,thermal-armada))
-
-
 define KernelPackage/thermal-imx
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Temperature sensor driver for Freescale i.MX SoCs
diff --git a/target/linux/mvebu/Makefile b/target/linux/mvebu/Makefile
index 143c3f842b..bda69f64c7 100644
--- a/target/linux/mvebu/Makefile
+++ b/target/linux/mvebu/Makefile
@@ -20,6 +20,6 @@ include $(INCLUDE_DIR)/target.mk
 
 KERNELNAME:=zImage dtbs
 
-DEFAULT_PACKAGES += uboot-envtools
+DEFAULT_PACKAGES += uboot-envtools kmod-gpio-button-hotplug
 
 $(eval $(call BuildTarget))
diff --git a/target/linux/mvebu/config-4.4 b/target/linux/mvebu/config-4.4
index cc5886956d..829bfafa4c 100644
--- a/target/linux/mvebu/config-4.4
+++ b/target/linux/mvebu/config-4.4
@@ -1,3 +1,4 @@
+CONFIG_AHCI_MVEBU=y
 CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
 CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
@@ -29,6 +30,7 @@ CONFIG_ARM=y
 CONFIG_ARMADA_370_CLK=y
 CONFIG_ARMADA_370_XP_TIMER=y
 CONFIG_ARMADA_38X_CLK=y
+CONFIG_ARMADA_THERMAL=y
 CONFIG_ARMADA_XP_CLK=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
@@ -48,6 +50,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_ARM_THUMBEE is not set
 CONFIG_ARM_VIRT_EXT=y
 CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
+CONFIG_ATA=y
 CONFIG_ATAGS=y
 CONFIG_AUTO_ZRELADDR=y
 CONFIG_BOUNCE=y
@@ -88,10 +91,16 @@ CONFIG_CPU_PABRT_V7=y
 CONFIG_CPU_PJ4B=y
 CONFIG_CPU_PM=y
 CONFIG_CPU_RMAP=y
+CONFIG_CPU_THERMAL=y
 CONFIG_CPU_TLB_V7=y
 CONFIG_CPU_V7=y
 CONFIG_CRC16=y
 CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEV_MARVELL_CESA=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HW=y
 CONFIG_CRYPTO_LZO=y
 CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_WORKQUEUE=y
@@ -134,10 +143,12 @@ CONFIG_GENERIC_IRQ_SHOW=y
 CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
 CONFIG_GENERIC_MSI_IRQ=y
 CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
 CONFIG_GENERIC_SCHED_CLOCK=y
 CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GENERIC_STRNCPY_FROM_USER=y
 CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GLOB=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_DEVRES=y
 CONFIG_GPIO_MVEBU=y
@@ -198,8 +209,13 @@ CONFIG_HAVE_UID16=y
 CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
 CONFIG_HIGHMEM=y
 # CONFIG_HIGHPTE is not set
+CONFIG_HWMON=y
 CONFIG_HZ_FIXED=0
 CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MV64XXX=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_IOMMU_HELPER=y
 CONFIG_IRQCHIP=y
@@ -210,6 +226,9 @@ CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_WORK=y
 # CONFIG_IWMMXT is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PCA963X=y
+CONFIG_LEDS_TLC591XX=y
+CONFIG_LEDS_TRIGGER_USBDEV=y
 CONFIG_LIBFDT=y
 CONFIG_LOCK_SPIN_ON_OWNER=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -230,6 +249,9 @@ CONFIG_MDIO_BOARDINFO=y
 CONFIG_MEMORY=y
 CONFIG_MIGHT_HAVE_CACHE_L2X0=y
 CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MMC=y
+CONFIG_MMC_MVSDIO=y
+# CONFIG_MMC_TIFM_SD is not set
 CONFIG_MODULES_USE_ELF_REL=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_M25P80=y
@@ -258,6 +280,7 @@ CONFIG_MV_XOR=y
 CONFIG_NEED_DMA_MAP_STATE=y
 # CONFIG_NEON is not set
 CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NLS=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_NO_BOOTMEM=y
 CONFIG_NR_CPUS=4
@@ -276,6 +299,7 @@ CONFIG_OF_PCI_IRQ=y
 CONFIG_OF_RESERVED_MEM=y
 CONFIG_OLD_SIGACTION=y
 CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_ORION_WATCHDOG=y
 CONFIG_OUTER_CACHE=y
 CONFIG_OUTER_CACHE_SYNC=y
 CONFIG_PAGE_OFFSET=0xC0000000
@@ -304,17 +328,23 @@ CONFIG_PWM_SYSFS=y
 CONFIG_RATIONAL=y
 CONFIG_RCU_STALL_COMMON=y
 CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
 CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_MV is not set
+CONFIG_RTC_DRV_ARMADA38X=y
+CONFIG_RTC_DRV_MV=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_MV=y
 CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SENSORS_PWM_FAN=y
+CONFIG_SENSORS_TMP421=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_8250_FSL=y
 CONFIG_SMP=y
@@ -324,11 +354,17 @@ CONFIG_SPARSE_IRQ=y
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 CONFIG_SPI_ORION=y
+CONFIG_SRAM=y
 CONFIG_SRCU=y
 CONFIG_SWCONFIG=y
 CONFIG_SWIOTLB=y
 CONFIG_SWP_EMULATE=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
 # CONFIG_THUMB2_KERNEL is not set
 CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_TIMER_STATS=y
@@ -339,12 +375,25 @@ CONFIG_UBIFS_FS_LZO=y
 CONFIG_UBIFS_FS_XZ=y
 CONFIG_UBIFS_FS_ZLIB=y
 CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_ORION=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_PCI=y
 CONFIG_USB_PHY=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_MVEBU=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_XHCI_PLATFORM=y
 CONFIG_USE_OF=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_VFP=y
 CONFIG_VFPv3=y
+CONFIG_WATCHDOG_CORE=y
 CONFIG_XPS=y
 CONFIG_XZ_DEC_ARM=y
 CONFIG_XZ_DEC_BCJ=y
diff --git a/target/linux/mvebu/profiles/000-Default.mk b/target/linux/mvebu/profiles/000-Default.mk
index 56608368ee..7f71f3e01f 100644
--- a/target/linux/mvebu/profiles/000-Default.mk
+++ b/target/linux/mvebu/profiles/000-Default.mk
@@ -7,16 +7,7 @@
 
 define Profile/Default
 	NAME:=Default Profile (all drivers)
-	PACKAGES:= \
-		kmod-mmc kmod-mvsdio swconfig \
-		kmod-usb2 kmod-usb3 kmod-usb-storage \
-		kmod-i2c-core kmod-i2c-mv64xxx \
-		kmod-ata-core kmod-ata-marvell-sata \
-		kmod-rtc-marvell kmod-thermal-armada \
-		kmod-gpio-button-hotplug kmod-hwmon-tmp421 \
-		kmod-hwmon-pwmfan kmod-leds-tlc59116 \
-		kmod-ledtrig-usbdev kmod-mwlwifi wpad-mini \
-		kmod-ata-mvebu-ahci
+	PACKAGES:= kmod-mwlwifi wpad-mini swconfig
 endef
 
 define Profile/Default/Description
diff --git a/target/linux/mvebu/profiles/globalscale.mk b/target/linux/mvebu/profiles/globalscale.mk
index 7938c35be3..1b9f780e79 100644
--- a/target/linux/mvebu/profiles/globalscale.mk
+++ b/target/linux/mvebu/profiles/globalscale.mk
@@ -7,11 +7,7 @@
 
 define Profile/Mirabox
   NAME:=Globalscale Mirabox
-  PACKAGES:= \
-	kmod-usb3 kmod-usb-storage \
-	kmod-i2c-core kmod-i2c-mv64xxx \
-	kmod-rtc-marvell kmod-thermal-armada \
-	kmod-gpio-button-hotplug kmod-mmc kmod-mvsdio
+  PACKAGES:=
 endef
 
 define Profile/Mirabox/Description
diff --git a/target/linux/mvebu/profiles/linksys.mk b/target/linux/mvebu/profiles/linksys.mk
index 9c954bd305..41f9c7d5bb 100644
--- a/target/linux/mvebu/profiles/linksys.mk
+++ b/target/linux/mvebu/profiles/linksys.mk
@@ -7,15 +7,7 @@
 
 define Profile/Caiman
   NAME:=Linksys WRT1200AC (Caiman)
-  PACKAGES:= \
-	kmod-usb2 kmod-usb3 kmod-usb-storage \
-	kmod-i2c-core kmod-i2c-mv64xxx \
-	kmod-ata-core kmod-ata-mvebu-ahci \
-	kmod-rtc-armada38x kmod-thermal-armada \
-	kmod-gpio-button-hotplug kmod-hwmon-tmp421 \
-	kmod-leds-pca963x \
-	kmod-ledtrig-usbdev kmod-mwlwifi wpad-mini \
-	swconfig
+  PACKAGES:= kmod-mwlwifi wpad-mini swconfig
 endef
 
 define Profile/Caiman/Description
@@ -27,15 +19,7 @@ $(eval $(call Profile,Caiman))
 
 define Profile/Cobra
   NAME:=Linksys WRT1900ACv2 (Cobra)
-  PACKAGES:= \
-	kmod-usb2 kmod-usb3 kmod-usb-storage \
-	kmod-i2c-core kmod-i2c-mv64xxx \
-	kmod-ata-core kmod-ata-mvebu-ahci \
-	kmod-rtc-armada38x kmod-thermal-armada \
-	kmod-gpio-button-hotplug kmod-hwmon-tmp421 \
-	kmod-leds-pca963x \
-	kmod-ledtrig-usbdev kmod-mwlwifi wpad-mini \
-	swconfig
+  PACKAGES:= kmod-mwlwifi wpad-mini swconfig
 endef
 
 define Profile/Cobra/Description
@@ -47,15 +31,7 @@ $(eval $(call Profile,Cobra))
 
 define Profile/Mamba
   NAME:=Linksys WRT1900AC (Mamba)
-  PACKAGES:= \
-	kmod-usb2 kmod-usb3 kmod-usb-storage \
-	kmod-i2c-core kmod-i2c-mv64xxx \
-	kmod-ata-core kmod-ata-marvell-sata \
-	kmod-rtc-marvell kmod-thermal-armada \
-	kmod-gpio-button-hotplug kmod-hwmon-tmp421 \
-	kmod-hwmon-pwmfan kmod-leds-tlc591xx \
-	kmod-ledtrig-usbdev kmod-mwlwifi wpad-mini \
-	swconfig
+  PACKAGES:= kmod-mwlwifi wpad-mini swconfig
 endef
 
 define Profile/Mamba/Description
@@ -67,15 +43,7 @@ $(eval $(call Profile,Mamba))
 
 define Profile/Shelby
   NAME:=Linksys WRT1900ACS (Shelby)
-  PACKAGES:= \
-	kmod-usb2 kmod-usb3 kmod-usb-storage \
-	kmod-i2c-core kmod-i2c-mv64xxx \
-	kmod-ata-core kmod-ata-mvebu-ahci \
-	kmod-rtc-armada38x kmod-thermal-armada \
-	kmod-gpio-button-hotplug kmod-hwmon-tmp421 \
-	kmod-leds-pca963x \
-	kmod-ledtrig-usbdev kmod-mwlwifi wpad-mini \
-	swconfig
+  PACKAGES:= kmod-mwlwifi wpad-mini swconfig
 endef
 
 define Profile/Shelby/Description
diff --git a/target/linux/mvebu/profiles/marvell.mk b/target/linux/mvebu/profiles/marvell.mk
index e8ca9bd250..d4a1701c13 100644
--- a/target/linux/mvebu/profiles/marvell.mk
+++ b/target/linux/mvebu/profiles/marvell.mk
@@ -7,11 +7,7 @@
 
 define Profile/370-DB
   NAME:=Marvell Armada 370 DB (DB-88F6710-BP-DDR3)
-  PACKAGES:= \
-	kmod-mmc kmod-mvsdio kmod-usb2 kmod-usb-storage \
-	kmod-i2c-core kmod-i2c-mv64xxx \
-	kmod-ata-core kmod-ata-marvell-sata \
-	kmod-rtc-marvell kmod-thermal-armada
+  PACKAGES:=
 endef
 
 define Profile/370-DB/Description
@@ -22,11 +18,7 @@ $(eval $(call Profile,370-DB))
 
 define Profile/370-RD
   NAME:=Marvell Armada 370 RD (RD-88F6710-A1)
-  PACKAGES:= \
-	kmod-mmc kmod-mvsdio kmod-usb2 kmod-usb-storage \
-	kmod-i2c-core kmod-i2c-mv64xxx \
-	kmod-ata-core kmod-ata-marvell-sata \
-	kmod-rtc-marvell kmod-thermal-armada
+  PACKAGES:=
 endef
 
 define Profile/370-RD/Description
@@ -37,10 +29,7 @@ $(eval $(call Profile,370-RD))
 
 define Profile/385-RD
   NAME:=Marvell Armada 385 RD (RD-88F6820-AP)
-  PACKAGES:= \
-	kmod-mmc kmod-mvsdio kmod-usb3 kmod-usb-storage \
-	kmod-i2c-core kmod-i2c-mv64xxx \
-	kmod-thermal-armada
+  PACKAGES:=
 endef
 
 define Profile/385-RD/Description
@@ -51,11 +40,7 @@ $(eval $(call Profile,385-RD))
 
 define Profile/385-DB-AP
   NAME:=Marvell Armada 385 DB AP (DB-88F6820-AP)
-  PACKAGES:= \
-	kmod-usb3 kmod-usb-storage \
-	kmod-i2c-core kmod-i2c-mv64xxx \
-	kmod-ata-core kmod-ata-marvell-sata \
-	kmod-thermal-armada
+  PACKAGES:=
 endef
 
 define Profile/385-DB-AP/Description
@@ -66,11 +51,7 @@ $(eval $(call Profile,385-DB-AP))
 
 define Profile/XP-DB
   NAME:=Marvell Armada XP DB (DB-78460-BP)
-  PACKAGES:= \
-	kmod-mmc kmod-mvsdio kmod-usb2 kmod-usb-storage \
-	kmod-i2c-core kmod-i2c-mv64xxx \
-	kmod-ata-core kmod-ata-marvell-sata \
-	kmod-rtc-marvell kmod-thermal-armada
+  PACKAGES:=
 endef
 
 define Profile/XP-DB/Description
@@ -81,11 +62,7 @@ $(eval $(call Profile,XP-DB))
 
 define Profile/XP-GP
   NAME:=Marvell Armada XP GP (DB-MV784MP-GP)
-  PACKAGES:= \
-	kmod-mmc kmod-mvsdio kmod-usb2 kmod-usb-storage \
-	kmod-i2c-core kmod-i2c-mv64xxx \
-	kmod-ata-core kmod-ata-marvell-sata \
-	kmod-rtc-marvell kmod-thermal-armada
+  PACKAGES:=
 endef
 
 define Profile/XP-GP/Description
diff --git a/target/linux/mvebu/profiles/plathome.mk b/target/linux/mvebu/profiles/plathome.mk
index 63cdb71139..02503a190a 100644
--- a/target/linux/mvebu/profiles/plathome.mk
+++ b/target/linux/mvebu/profiles/plathome.mk
@@ -7,11 +7,7 @@
 
 define Profile/OpenBlocks-AX-3-4
   NAME:=Plat'Home OpenBlocks AX3
-  PACKAGES:= \
-	kmod-usb2 kmod-usb-storage \
-	kmod-i2c-core kmod-i2c-mv64xxx \
-	kmod-ata-core kmod-ata-marvell-sata \
-	kmod-rtc-marvell kmod-thermal-armada
+  PACKAGES:=
 endef
 
 define Profile/OpenBlocks-AX-3-4/Description
diff --git a/target/linux/mvebu/profiles/solidrun.mk b/target/linux/mvebu/profiles/solidrun.mk
index 5aa61e28a2..e66d2cbc7d 100644
--- a/target/linux/mvebu/profiles/solidrun.mk
+++ b/target/linux/mvebu/profiles/solidrun.mk
@@ -7,11 +7,7 @@
 
 define Profile/Solidrun-Clearfog-A1
   NAME:=SolidRun ClearFog A1 board
-  PACKAGES:= \
-	kmod-usb3 kmod-usb2 kmod-usb-storage \
-	kmod-of-i2c kmod-i2c-core kmod-i2c-mv64xxx \
-	kmod-ata-core kmod-ata-marvell-sata \
-	kmod-thermal-armada kmod-rtc-marvell
+  PACKAGES:=
 endef
 
 define Profile/Solidrun-Clearfog-A1/Description