From: Andrew Lunn <andrew@lunn.ch>
Date: Thu, 22 Feb 2018 21:58:33 +0000 (+0100)
Subject: arm: mvebu: 370-rd: Enable PHY interrupt handling
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=f8c193ca1f7d3b69c031970815d14e09de396ee8;p=openwrt%2Fstaging%2Fblogic.git

arm: mvebu: 370-rd: Enable PHY interrupt handling

The Ethernet switch has an embedded interrupt controller. Interrupts
from the embedded PHYs are part of this interrupt controller.
Explicitly list the MDIO bus the embedded PHYs are on, and wire up the
interrupts.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 8b2fa9a49967..c28afb242393 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -56,6 +56,7 @@
 
 /dts-v1/;
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include "armada-370.dtsi"
 
@@ -243,6 +244,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x10>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		ports {
 			#address-cells = <1>;
@@ -278,6 +281,35 @@
 				};
 			};
 		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switchphy0: switchphy@0 {
+				reg = <0>;
+				interrupt-parent = <&switch>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy1: switchphy@1 {
+				reg = <1>;
+				interrupt-parent = <&switch>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy2: switchphy@2 {
+				reg = <2>;
+				interrupt-parent = <&switch>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy3: switchphy@3 {
+				reg = <3>;
+				interrupt-parent = <&switch>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
 	};
 };