From: Adrian Schmutzler Date: Wed, 18 Sep 2019 15:11:06 +0000 (+0200) Subject: ath79: remove invalid uses of ath9k_patch_fw_mac_crc X-Git-Tag: v21.02.0-rc1~4957 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=f8d8b3f85d70a85d4fabc9b8ed4dbc8020be0523;p=openwrt%2Fopenwrt.git ath79: remove invalid uses of ath9k_patch_fw_mac_crc Some ar9344-based devices are using ath9k_patch_fw_mac_crc, which is meant to generate a checksum, for fixing their ath9k MAC addresses. However, those do not have a checksum field, and the calculated checksum offset would be negative. This patch will use ath9k_patch_fw_mac function for those devices. Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index f07dbf83c4..63879cca47 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -103,7 +103,7 @@ case "$FIRMWARE" in dlink,dir-825-c1|\ dlink,dir-835-a1) ath9k_eeprom_extract "art" 0x1000 0x440 - ath9k_patch_fw_mac_crc $(mtd_get_mac_text "mac" 0x4) 0x2 + ath9k_patch_fw_mac $(mtd_get_mac_text "mac" 0x4) 0x2 ;; dlink,dir-842-c1|\ dlink,dir-842-c2|\ @@ -156,7 +156,7 @@ case "$FIRMWARE" in dlink,dir-825-c1|\ dlink,dir-835-a1) ath9k_eeprom_extract "art" 0x5000 0x440 - ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 0x2 + ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 0x2 ;; ocedo,raccoon|\ tplink,tl-wdr3500-v1|\ @@ -196,7 +196,7 @@ case "$FIRMWARE" in ;; wd,mynet-wifi-rangeextender) ath9k_eeprom_extract "art" 0x1000 0x1000 - ath9k_patch_fw_mac_crc $(nvram get wl0_hwaddr) "$mac" 0x2 + ath9k_patch_fw_mac $(nvram get wl0_hwaddr) "$mac" 0x2 ;; *) ath9k_eeprom_die "board $board is not supported yet"