From: Paweł Owoc Date: Thu, 1 Aug 2024 06:53:14 +0000 (+0200) Subject: qualcommax: ipq807x: fix mac setup for Linksys MX4200v2 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=f96b3383d51f544861b8da4d7192594497d3f0b8;p=openwrt%2Fopenwrt.git qualcommax: ipq807x: fix mac setup for Linksys MX4200v2 Currently for Linksys MX4200v2 all u-boot ethXaddr variables share the same MAC address and there is no need to check them one by one. Signed-off-by: Paweł Owoc Link: https://github.com/openwrt/openwrt/pull/16070 Signed-off-by: Robert Marko --- diff --git a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network index 012288fedc..e3e1104486 100644 --- a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network +++ b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network @@ -83,10 +83,8 @@ ipq807x_setup_macs() case "$board" in linksys,mx4200v2) label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr) - for i in $(seq 3 5); do - [ "$(mtd_get_mac_ascii u_env eth${i}addr)" != "$label_mac" ] && lan_mac=$label_mac - done - [ "$(mtd_get_mac_ascii u_env eth2addr)" != "$label_mac" ] && wan_mac=$label_mac + [ "$(mtd_get_mac_ascii u_env eth1addr)" != "$label_mac" ] && wan_mac=$label_mac + [ "$(mtd_get_mac_ascii u_env eth2addr)" != "$label_mac" ] && lan_mac=$label_mac ;; linksys,mx8500) label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)