From: Thibaut VARÈNE Date: Thu, 14 Apr 2022 10:39:04 +0000 (+0200) Subject: mac80211 adjust QCA9561 PA bias X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=f9ff282d17ec652d63fa2404e47bb0e15ed95b69;p=openwrt%2Fstaging%2Flinusw.git mac80211 adjust QCA9561 PA bias ath9k is setting the TX PA DC bias level different on QCA9561 and QCA9565 although they have the same radio IP-core, which results in a very low output power and very low throughput as devices are further away from the AP (compared to other 2.4GHz APs.) In real life testing, without this patch the 2.4GHz throughput on Yuncore XD3200 is around 10Mbps sitting close to the AP, and close to theoretical maximum with the patch applied. Signed-off-by: Clemens Hopfer [edit commit message] Signed-off-by: Thibaut VARÈNE --- diff --git a/package/kernel/mac80211/patches/ath9k/580-ath9k_ar9561_xpa_bias_level_top.patch b/package/kernel/mac80211/patches/ath9k/580-ath9k_ar9561_xpa_bias_level_top.patch new file mode 100644 index 0000000000..25db3ab5ba --- /dev/null +++ b/package/kernel/mac80211/patches/ath9k/580-ath9k_ar9561_xpa_bias_level_top.patch @@ -0,0 +1,18 @@ +--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c ++++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +@@ -3604,10 +3604,13 @@ static void ar9003_hw_xpa_bias_level_app + { + int bias = ar9003_modal_header(ah, is2ghz)->xpaBiasLvl; + ++ ++ + if (AR_SREV_9485(ah) || AR_SREV_9330(ah) || AR_SREV_9340(ah) || +- AR_SREV_9531(ah) || AR_SREV_9561(ah)) ++ AR_SREV_9531(ah)) + REG_RMW_FIELD(ah, AR_CH0_TOP2, AR_CH0_TOP2_XPABIASLVL, bias); +- else if (AR_SREV_9462(ah) || AR_SREV_9550(ah) || AR_SREV_9565(ah)) ++ else if (AR_SREV_9462(ah) || AR_SREV_9550(ah) || AR_SREV_9565(ah) || ++ AR_SREV_9561(ah)) + REG_RMW_FIELD(ah, AR_CH0_TOP, AR_CH0_TOP_XPABIASLVL, bias); + else { + REG_RMW_FIELD(ah, AR_CH0_TOP, AR_CH0_TOP_XPABIASLVL, bias);