From: Daniel Golle Date: Sat, 1 May 2021 21:32:54 +0000 (+0100) Subject: uboot-mediatek: bpi-r64: add TFTP update options to eMMC bootmenu X-Git-Tag: v22.03.0-rc1~2671 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=fbcfa895a88b712af04b759cda4f3ae17e4372ff;p=openwrt%2Fopenwrt.git uboot-mediatek: bpi-r64: add TFTP update options to eMMC bootmenu Just like on SPI-NAND, also allow updating the bootloader comfortably on eMMC installations. Signed-off-by: Daniel Golle --- diff --git a/package/boot/uboot-mediatek/patches/404-add-bananapi_bpi-r64_defconfigs.patch b/package/boot/uboot-mediatek/patches/404-add-bananapi_bpi-r64_defconfigs.patch index 03f00918cc..ceaa15045e 100644 --- a/package/boot/uboot-mediatek/patches/404-add-bananapi_bpi-r64_defconfigs.patch +++ b/package/boot/uboot-mediatek/patches/404-add-bananapi_bpi-r64_defconfigs.patch @@ -204,10 +204,10 @@ +check_recovery=run ubi_read_recovery ; if iminfo $loadaddr ; then bootm $loadaddr ; else ubi remove recovery ; fi +check_ubi=ubi part ubi || run ubi_format +emmc_init=run emmc_init_bl && run emmc_init_openwrt ; env default bootcmd ; saveenv ; saveenv -+emmc_init_bl=run sdmmc_read_emmc_bl2 && run emmc_write_bl2 && run sdmmc_read_emmc_hdr && run emmc_write_hdr && run sdmmc_read_emmc_bl3 && run emmc_write_bl3 ++emmc_init_bl=run sdmmc_read_emmc_bl2 && run emmc_write_bl2 && run sdmmc_read_emmc_hdr && run emmc_write_hdr && run sdmmc_read_emmc_fip && run emmc_write_fip +emmc_init_openwrt=run sdmmc_read_recovery && run emmc_write_recovery ; run sdmmc_read_production && run emmc_write_production +emmc_write_bl2=mmc dev 0 1 && mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $loadaddr 0x0 0x100 ; mmc partconf 0 1 1 0 -+emmc_write_bl3=mmc dev 0 0 && mmc erase 0x1000 0x1000 && mmc write $loadaddr 0x1000 0x1000 && mmc erase 0x2000 0x800 ++emmc_write_fip=mmc dev 0 0 && mmc erase 0x1000 0x1000 && mmc write $loadaddr 0x1000 0x1000 && mmc erase 0x2000 0x800 +emmc_write_hdr=mmc dev 0 0 && mmc erase 0x0 0x40 && mmc write $loadaddr 0x0 0x40 +emmc_write_production=iminfo $loadaddr && mmc dev 0 && part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol +emmc_write_recovery=iminfo $loadaddr && mmc dev 0 && part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol @@ -218,7 +218,7 @@ +reset_factory=eraseenv && reset +sdmmc_read_emmc_hdr=mmc dev 1 && part start mmc 1 install part_addr && mmc read $loadaddr $part_addr 0x40 +sdmmc_read_emmc_bl2=mmc dev 1 && part start mmc 1 install part_addr && setexpr offset $part_addr + 0x400 && mmc read $loadaddr $offset 0x400 -+sdmmc_read_emmc_bl3=mmc dev 1 && part start mmc 1 install part_addr && setexpr offset $part_addr + 0x1000 && mmc read $loadaddr $offset 0x1000 ++sdmmc_read_emmc_fip=mmc dev 1 && part start mmc 1 install part_addr && setexpr offset $part_addr + 0x1000 && mmc read $loadaddr $offset 0x1000 +sdmmc_read_production=mmc dev 1 && part start mmc 1 $part_default part_addr && part size mmc 1 $part_default part_size && run mmc_read_vol +sdmmc_read_recovery=mmc dev 1 && part start mmc 1 $part_recovery part_addr && part size mmc 1 $part_recovery part_size && run mmc_read_vol +sdmmc_read_snand_bl2=mmc dev 1 && part start mmc 1 install part_addr && setexpr offset $part_addr + 0x2000 && mmc read $loadaddr $offset 0x400 @@ -391,7 +391,7 @@ +CONFIG_USB_STORAGE=y --- /dev/null +++ b/bananapi_bpi-r64-emmc_env -@@ -0,0 +1,46 @@ +@@ -0,0 +1,54 @@ +ipaddr=192.168.1.1 +serverip=192.168.1.254 +loadaddr=0x4007ff28 @@ -403,6 +403,8 @@ +bootdelay=0 +bootfile=openwrt-mediatek-mt7622-bananapi_bpi-r64-initramfs-recovery.itb +bootfile_upg=openwrt-mediatek-mt7622-bananapi_bpi-r64-squashfs-sysupgrade.itb ++bootfile_fip=openwrt-mediatek-mt7622-bananapi_bpi-r64-emmc-bl31-uboot.fip ++bootfile_bl2=openwrt-mediatek-mt7622-bananapi_bpi-r64-emmc-preloader.bin +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 +bootmenu_default=0 +bootmenu_delay=0 @@ -414,8 +416,10 @@ +bootmenu_3=Boot recovery system from eMMC.=run boot_recovery ; run bootmenu_confirm_return +bootmenu_4=Load production system via TFTP then write to eMMC.=setenv noboot 1 ; run boot_tftp_production ; setenv noboot ; run bootmenu_confirm_return +bootmenu_5=Load recovery system via TFTP then write to eMMC.=setenv noboot 1 ; run boot_tftp_recovery ; setenv noboot ; run bootmenu_confirm_return -+bootmenu_6=Reboot.=reset -+bootmenu_7=Reset all settings to factory defaults.=run reset_factory ; reset ++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to eMMC.=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_7=Load BL2 preloader via TFTP then write to eMMC.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_8=Reboot.=reset ++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset +boot_default=run bootcmd ; run boot_recovery ; run boot_tftp_forever +boot_first=if button reset ; then run boot_tftp_forever ; fi ; bootmenu +boot_production=led bpi-r64:pio:green on ; run emmc_read_production && bootm $loadaddr#$bootconf @@ -424,9 +428,13 @@ +boot_tftp_forever=led bpi-r64:pio:blue on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done +boot_tftp_production=tftpboot $loadaddr $bootfile_upg && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi +boot_tftp_recovery=tftpboot $loadaddr $bootfile && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2 ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip +boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr +emmc_write_production=iminfo $fileaddr && mmc dev 0 && part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol +emmc_write_recovery=iminfo $fileaddr && mmc dev 0 && part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol ++emmc_write_bl2=mmc dev 0 1 && mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $loadaddr 0x0 0x100 ; mmc partconf 0 1 1 0 ++emmc_write_fip=mmc dev 0 0 && mmc erase 0x1000 0x1000 && mmc write $loadaddr 0x1000 0x1000 && mmc erase 0x2000 0x800 +emmc_read_production=mmc dev 0 && part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol +emmc_read_recovery=mmc dev 0 && part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol +mmc_write_vol=imszb $fileaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$part_size && mmc write $fileaddr 0x$part_addr 0x$image_size