From: Manfred Schlaegl Date: Mon, 6 Jun 2016 08:47:47 +0000 (+0200) Subject: net: phy: smsc: reintroduced unconditional soft reset X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=fc0f7e3317c5f406e6d5520209b4689a4ffecfdf;p=openwrt%2Fstaging%2Fblogic.git net: phy: smsc: reintroduced unconditional soft reset We detected some problems using the smsc lan8720a in combination with i.MX28 and tracked this down to commit 21009686662f ("net: phy: smsc: move smsc_phy_config_init reset part in a soft_reset function") With 2100968666 the generic soft reset is replaced by a specific function which handles power down state correctly. But additionally the soft reset itself got conditional and is therefore also only performed if the phy is in power down state. This patch keeps the conditional wake up from power down, but re-introduces the unconditional soft reset using the generic soft reset function. It was tested on linux-4.1.25 and linux-4.7.0-rc2. Signed-off-by: Manfred Schlaegl Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 2e21e9366f76..b62c4aaee40b 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -75,22 +75,13 @@ static int smsc_phy_reset(struct phy_device *phydev) * in all capable mode before using it. */ if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) { - int timeout = 50000; - - /* set "all capable" mode and reset the phy */ + /* set "all capable" mode */ rc |= MII_LAN83C185_MODE_ALL; phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc); - phy_write(phydev, MII_BMCR, BMCR_RESET); - - /* wait end of reset (max 500 ms) */ - do { - udelay(10); - if (timeout-- == 0) - return -1; - rc = phy_read(phydev, MII_BMCR); - } while (rc & BMCR_RESET); } - return 0; + + /* reset the phy */ + return genphy_soft_reset(phydev); } static int lan911x_config_init(struct phy_device *phydev)