From: Stefan Kalscheuer Date: Sun, 9 Nov 2025 12:30:51 +0000 (+0100) Subject: kernel/bcm53xx: Create kernel files for v6.12 (from v6.6) X-Git-Tag: v25.12.0-rc1~472 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=fc6cdb7ba173b7c6fcc5151c30736e7b876ca6f1;p=openwrt%2Fopenwrt.git kernel/bcm53xx: Create kernel files for v6.12 (from v6.6) This is an automatically generated commit. When doing `git bisect`, consider `git bisect --skip`. Signed-off-by: Stefan Kalscheuer Link: https://github.com/openwrt/openwrt/pull/20167 Signed-off-by: Christian Marangi --- diff --git a/target/linux/bcm53xx/config-6.12 b/target/linux/bcm53xx/config-6.12 new file mode 100644 index 0000000000..a3030c116f --- /dev/null +++ b/target/linux/bcm53xx/config-6.12 @@ -0,0 +1,357 @@ +CONFIG_ALIGNMENT_TRAP=y +CONFIG_ARCH_32BIT_OFF_T=y +CONFIG_ARCH_BCM=y +CONFIG_ARCH_BCM_5301X=y +CONFIG_ARCH_BCM_53573=y +CONFIG_ARCH_BCM_IPROC=y +CONFIG_ARCH_BCM_NSP=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_KEEP_MEMBLOCK=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MULTIPLATFORM=y +CONFIG_ARCH_MULTI_V6_V7=y +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y +CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_STACKWALK=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARM=y +CONFIG_ARM_AMBA=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +# CONFIG_ARM_ATAG_DTB_COMPAT is not set +CONFIG_ARM_ERRATA_754322=y +CONFIG_ARM_ERRATA_764369=y +CONFIG_ARM_ERRATA_775420=y +CONFIG_ARM_GIC=y +CONFIG_ARM_GLOBAL_TIMER=y +CONFIG_ARM_GT_INITIAL_PRESCALER_VAL=1 +CONFIG_ARM_HAS_GROUP_RELOCS=y +CONFIG_ARM_HEAVY_MB=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_L1_CACHE_SHIFT_6=y +CONFIG_ARM_PATCH_IDIV=y +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_ARM_SP805_WATCHDOG=y +CONFIG_ARM_THUMB=y +CONFIG_ARM_TIMER_SP804=y +CONFIG_ARM_UNWIND=y +CONFIG_ARM_VIRT_EXT=y +CONFIG_ATAGS=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_B53=y +CONFIG_B53_MDIO_DRIVER=y +CONFIG_B53_SERDES=y +CONFIG_B53_SRAB_DRIVER=y +CONFIG_BCM47XX_NVRAM=y +CONFIG_BCM47XX_SPROM=y +CONFIG_BCM47XX_WDT=y +CONFIG_BCMA=y +CONFIG_BCMA_BLOCKIO=y +CONFIG_BCMA_DEBUG=y +CONFIG_BCMA_DRIVER_GMAC_CMN=y +CONFIG_BCMA_DRIVER_GPIO=y +CONFIG_BCMA_DRIVER_PCI=y +CONFIG_BCMA_FALLBACK_SPROM=y +CONFIG_BCMA_HOST_PCI=y +CONFIG_BCMA_HOST_PCI_POSSIBLE=y +CONFIG_BCMA_HOST_SOC=y +CONFIG_BCMA_SFLASH=y +# CONFIG_BCM_CYGNUS_PHY is not set +CONFIG_BCM_NET_PHYLIB=y +CONFIG_BCM_NS_THERMAL=y +CONFIG_BCM_SR_THERMAL=y +CONFIG_BGMAC=y +CONFIG_BGMAC_BCMA=y +CONFIG_BGMAC_PLATFORM=y +CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y +CONFIG_BLK_MQ_PCI=y +CONFIG_BOUNCE=y +CONFIG_BROADCOM_PHY=y +CONFIG_CACHE_L2X0=y +CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y +CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y +CONFIG_CLKSRC_MMIO=y +# CONFIG_CLK_BCM_NS2 is not set +CONFIG_CLK_BCM_NSP=y +# CONFIG_CLK_BCM_SR is not set +CONFIG_CLONE_BACKWARDS=y +CONFIG_COMMON_CLK=y +CONFIG_COMMON_CLK_IPROC=y +CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_CONTEXT_TRACKING=y +CONFIG_CONTEXT_TRACKING_IDLE=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_SPECTRE=y +CONFIG_CPU_THUMB_CAPABLE=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_V7=y +CONFIG_CRC16=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_HASH_INFO=y +CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y +CONFIG_CRYPTO_LIB_GF128MUL=y +CONFIG_CRYPTO_LIB_SHA1=y +CONFIG_CRYPTO_LIB_UTILS=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_ZSTD=y +CONFIG_CURRENT_POINTER_IN_TPIDRURO=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_BCM_5301X=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" +CONFIG_DEBUG_MISC=y +CONFIG_DEBUG_UART_8250=y +CONFIG_DEBUG_UART_8250_SHIFT=0 +CONFIG_DEBUG_UART_PHYS=0x18000300 +CONFIG_DEBUG_UART_VIRT=0xf1000300 +CONFIG_DEBUG_USER=y +CONFIG_DMA_OPS=y +CONFIG_DTC=y +CONFIG_EARLY_PRINTK=y +CONFIG_EDAC_ATOMIC_SCRUB=y +CONFIG_EDAC_SUPPORT=y +CONFIG_EEPROM_AT24=y +CONFIG_EXCLUSIVE_SYSTEM_RAM=y +CONFIG_EXTCON=y +CONFIG_FIXED_PHY=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_FS_IOMAP=y +CONFIG_FUNCTION_ALIGNMENT=0 +CONFIG_FWNODE_MDIO=y +CONFIG_FW_LOADER_PAGED_BUF=y +CONFIG_FW_LOADER_SYSFS=y +# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set +CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_ARCH_TOPOLOGY=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_CPU_VULNERABILITIES=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_GENERIC_GETTIMEOFDAY=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_MULTI_HANDLER=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PHY=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_PINCTRL_GROUPS=y +CONFIG_GENERIC_PINMUX_FUNCTIONS=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_VDSO_32=y +CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GPIO_74X164=y +CONFIG_GPIO_BCM_XGS_IPROC=y +CONFIG_GPIO_CDEV=y +CONFIG_GPIO_GENERIC=y +CONFIG_GRO_CELLS=y +CONFIG_HARDEN_BRANCH_PREDICTOR=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAVE_SMP=y +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_BCM2835=y +CONFIG_HZ_FIXED=0 +CONFIG_HZ_PERIODIC=y +CONFIG_I2C=y +CONFIG_I2C_BCM_IPROC=y +# CONFIG_I2C_SLAVE_TESTUNIT is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQCHIP=y +CONFIG_IRQSTACKS=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_KMAP_LOCAL=y +CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y +# CONFIG_LEDS_BCM63138 is not set +CONFIG_LIBFDT=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MDIO_BCM_IPROC=y +CONFIG_MDIO_BUS=y +CONFIG_MDIO_BUS_MUX=y +# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set +CONFIG_MDIO_BUS_MUX_MMIOREG=y +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_DEVRES=y +CONFIG_MFD_SYSCON=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_MIGRATION=y +CONFIG_MMU_LAZY_TLB_REFCOUNT=y +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_BCM47XXSFLASH=y +CONFIG_MTD_BCM47XX_PARTS=y +CONFIG_MTD_NAND_BRCMNAND=y +CONFIG_MTD_NAND_BRCMNAND_IPROC=y +CONFIG_MTD_NAND_CORE=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_ECC_SW_HAMMING=y +CONFIG_MTD_OF_PARTS_LINKSYS_NS=y +CONFIG_MTD_PARSER_TPLINK_SAFELOADER=y +CONFIG_MTD_PARSER_TRX=y +CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_SEAMA_FW=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_SRCU_NMI_SAFE=y +CONFIG_NET_DEVLINK=y +CONFIG_NET_DSA=y +CONFIG_NET_DSA_QCA8K=y +CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT=y +CONFIG_NET_DSA_TAG_BRCM=y +CONFIG_NET_DSA_TAG_BRCM_COMMON=y +CONFIG_NET_DSA_TAG_BRCM_LEGACY=y +CONFIG_NET_DSA_TAG_BRCM_PREPEND=y +CONFIG_NET_DSA_TAG_NONE=y +CONFIG_NET_DSA_TAG_QCA=y +CONFIG_NET_EGRESS=y +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_INGRESS=y +CONFIG_NET_SELFTESTS=y +CONFIG_NET_XGRESS=y +CONFIG_NR_CPUS=2 +CONFIG_NVMEM=y +CONFIG_NVMEM_BRCM_NVRAM=y +CONFIG_NVMEM_LAYOUTS=y +CONFIG_NVMEM_SYSFS=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_KOBJ=y +CONFIG_OF_MDIO=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_OUTER_CACHE=y +CONFIG_OUTER_CACHE_SYNC=y +CONFIG_PADATA=y +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PAGE_POOL=y +CONFIG_PAGE_SIZE_LESS_THAN_256KB=y +CONFIG_PAGE_SIZE_LESS_THAN_64KB=y +CONFIG_PCI=y +CONFIG_PCIE_IPROC=y +CONFIG_PCIE_IPROC_BCMA=y +# CONFIG_PCIE_IPROC_PLATFORM is not set +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +CONFIG_PHYLIB_LEDS=y +CONFIG_PHYLINK=y +# CONFIG_PHY_BCM_NS_USB2 is not set +# CONFIG_PHY_BCM_NS_USB3 is not set +# CONFIG_PHY_BCM_SR_PCIE is not set +CONFIG_PHY_BCM_SR_USB=y +# CONFIG_PHY_BRCM_SATA is not set +# CONFIG_PHY_NS2_USB_DRD is not set +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IPROC_GPIO=y +CONFIG_PINCTRL_NS=y +# CONFIG_PINCTRL_NS2_MUX is not set +CONFIG_PINCTRL_NSP_GPIO=y +CONFIG_PINCTRL_NSP_MUX=y +CONFIG_PREEMPT_NONE_BUILD=y +CONFIG_PTP_1588_CLOCK_OPTIONAL=y +CONFIG_PWM=y +CONFIG_PWM_BCM_IPROC=y +CONFIG_PWM_SYSFS=y +CONFIG_RANDSTRUCT_NONE=y +CONFIG_RATIONAL=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_MMIO=y +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SGL_ALLOC=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_SOCK_RX_QUEUE_MAPPING=y +CONFIG_SOFTIRQ_ON_OWN_STACK=y +CONFIG_SPARSE_IRQ=y +CONFIG_SPI=y +CONFIG_SPI_BCM_QSPI=y +CONFIG_SPI_BITBANG=y +CONFIG_SPI_GPIO=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_MEM=y +CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y +CONFIG_SWPHY=y +CONFIG_SWP_EMULATE=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_THERMAL=y +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 +CONFIG_THERMAL_GOV_STEP_WISE=y +CONFIG_THERMAL_OF=y +CONFIG_THREAD_INFO_IN_TASK=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TIMER_OF=y +CONFIG_TIMER_PROBE=y +CONFIG_TREE_RCU=y +CONFIG_TREE_SRCU=y +CONFIG_UBIFS_FS=y +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +CONFIG_UNWINDER_ARM=y +CONFIG_USB_SUPPORT=y +CONFIG_USE_OF=y +# CONFIG_VFP is not set +CONFIG_WATCHDOG_CORE=y +CONFIG_XPS=y +CONFIG_XXHASH=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZSTD_COMMON=y +CONFIG_ZSTD_COMPRESS=y +CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/bcm53xx/config-6.6 b/target/linux/bcm53xx/config-6.6 deleted file mode 100644 index a3030c116f..0000000000 --- a/target/linux/bcm53xx/config-6.6 +++ /dev/null @@ -1,357 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_BCM=y -CONFIG_ARCH_BCM_5301X=y -CONFIG_ARCH_BCM_53573=y -CONFIG_ARCH_BCM_IPROC=y -CONFIG_ARCH_BCM_NSP=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_STACKWALK=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -# CONFIG_ARM_ATAG_DTB_COMPAT is not set -CONFIG_ARM_ERRATA_754322=y -CONFIG_ARM_ERRATA_764369=y -CONFIG_ARM_ERRATA_775420=y -CONFIG_ARM_GIC=y -CONFIG_ARM_GLOBAL_TIMER=y -CONFIG_ARM_GT_INITIAL_PRESCALER_VAL=1 -CONFIG_ARM_HAS_GROUP_RELOCS=y -CONFIG_ARM_HEAVY_MB=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_SP805_WATCHDOG=y -CONFIG_ARM_THUMB=y -CONFIG_ARM_TIMER_SP804=y -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_ATAGS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_B53=y -CONFIG_B53_MDIO_DRIVER=y -CONFIG_B53_SERDES=y -CONFIG_B53_SRAB_DRIVER=y -CONFIG_BCM47XX_NVRAM=y -CONFIG_BCM47XX_SPROM=y -CONFIG_BCM47XX_WDT=y -CONFIG_BCMA=y -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_DEBUG=y -CONFIG_BCMA_DRIVER_GMAC_CMN=y -CONFIG_BCMA_DRIVER_GPIO=y -CONFIG_BCMA_DRIVER_PCI=y -CONFIG_BCMA_FALLBACK_SPROM=y -CONFIG_BCMA_HOST_PCI=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -CONFIG_BCMA_HOST_SOC=y -CONFIG_BCMA_SFLASH=y -# CONFIG_BCM_CYGNUS_PHY is not set -CONFIG_BCM_NET_PHYLIB=y -CONFIG_BCM_NS_THERMAL=y -CONFIG_BCM_SR_THERMAL=y -CONFIG_BGMAC=y -CONFIG_BGMAC_BCMA=y -CONFIG_BGMAC_PLATFORM=y -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BOUNCE=y -CONFIG_BROADCOM_PHY=y -CONFIG_CACHE_L2X0=y -CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y -CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y -CONFIG_CLKSRC_MMIO=y -# CONFIG_CLK_BCM_NS2 is not set -CONFIG_CLK_BCM_NSP=y -# CONFIG_CLK_BCM_SR is not set -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_IPROC=y -CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONTEXT_TRACKING=y -CONFIG_CONTEXT_TRACKING_IDLE=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_LIB_GF128MUL=y -CONFIG_CRYPTO_LIB_SHA1=y -CONFIG_CRYPTO_LIB_UTILS=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_ZSTD=y -CONFIG_CURRENT_POINTER_IN_TPIDRURO=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_BCM_5301X=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" -CONFIG_DEBUG_MISC=y -CONFIG_DEBUG_UART_8250=y -CONFIG_DEBUG_UART_8250_SHIFT=0 -CONFIG_DEBUG_UART_PHYS=0x18000300 -CONFIG_DEBUG_UART_VIRT=0xf1000300 -CONFIG_DEBUG_USER=y -CONFIG_DMA_OPS=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EEPROM_AT24=y -CONFIG_EXCLUSIVE_SYSTEM_RAM=y -CONFIG_EXTCON=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FS_IOMAP=y -CONFIG_FUNCTION_ALIGNMENT=0 -CONFIG_FWNODE_MDIO=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_FW_LOADER_SYSFS=y -# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set -CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ARCH_TOPOLOGY=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_VDSO_32=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_74X164=y -CONFIG_GPIO_BCM_XGS_IPROC=y -CONFIG_GPIO_CDEV=y -CONFIG_GPIO_GENERIC=y -CONFIG_GRO_CELLS=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_SMP=y -CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_BCM2835=y -CONFIG_HZ_FIXED=0 -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_BCM_IPROC=y -# CONFIG_I2C_SLAVE_TESTUNIT is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQSTACKS=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_KMAP_LOCAL=y -CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y -# CONFIG_LEDS_BCM63138 is not set -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MDIO_BCM_IPROC=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_BUS_MUX=y -# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set -CONFIG_MDIO_BUS_MUX_MMIOREG=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGRATION=y -CONFIG_MMU_LAZY_TLB_REFCOUNT=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_BCM47XXSFLASH=y -CONFIG_MTD_BCM47XX_PARTS=y -CONFIG_MTD_NAND_BRCMNAND=y -CONFIG_MTD_NAND_BRCMNAND_IPROC=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=y -CONFIG_MTD_OF_PARTS_LINKSYS_NS=y -CONFIG_MTD_PARSER_TPLINK_SAFELOADER=y -CONFIG_MTD_PARSER_TRX=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_SEAMA_FW=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_SRCU_NMI_SAFE=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_QCA8K=y -CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT=y -CONFIG_NET_DSA_TAG_BRCM=y -CONFIG_NET_DSA_TAG_BRCM_COMMON=y -CONFIG_NET_DSA_TAG_BRCM_LEGACY=y -CONFIG_NET_DSA_TAG_BRCM_PREPEND=y -CONFIG_NET_DSA_TAG_NONE=y -CONFIG_NET_DSA_TAG_QCA=y -CONFIG_NET_EGRESS=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_INGRESS=y -CONFIG_NET_SELFTESTS=y -CONFIG_NET_XGRESS=y -CONFIG_NR_CPUS=2 -CONFIG_NVMEM=y -CONFIG_NVMEM_BRCM_NVRAM=y -CONFIG_NVMEM_LAYOUTS=y -CONFIG_NVMEM_SYSFS=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PAGE_POOL=y -CONFIG_PAGE_SIZE_LESS_THAN_256KB=y -CONFIG_PAGE_SIZE_LESS_THAN_64KB=y -CONFIG_PCI=y -CONFIG_PCIE_IPROC=y -CONFIG_PCIE_IPROC_BCMA=y -# CONFIG_PCIE_IPROC_PLATFORM is not set -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLIB_LEDS=y -CONFIG_PHYLINK=y -# CONFIG_PHY_BCM_NS_USB2 is not set -# CONFIG_PHY_BCM_NS_USB3 is not set -# CONFIG_PHY_BCM_SR_PCIE is not set -CONFIG_PHY_BCM_SR_USB=y -# CONFIG_PHY_BRCM_SATA is not set -# CONFIG_PHY_NS2_USB_DRD is not set -CONFIG_PINCTRL=y -CONFIG_PINCTRL_IPROC_GPIO=y -CONFIG_PINCTRL_NS=y -# CONFIG_PINCTRL_NS2_MUX is not set -CONFIG_PINCTRL_NSP_GPIO=y -CONFIG_PINCTRL_NSP_MUX=y -CONFIG_PREEMPT_NONE_BUILD=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_PWM=y -CONFIG_PWM_BCM_IPROC=y -CONFIG_PWM_SYSFS=y -CONFIG_RANDSTRUCT_NONE=y -CONFIG_RATIONAL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SGL_ALLOC=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SOCK_RX_QUEUE_MAPPING=y -CONFIG_SOFTIRQ_ON_OWN_STACK=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_BCM_QSPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_OF=y -CONFIG_THREAD_INFO_IN_TASK=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNWINDER_ARM=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -# CONFIG_VFP is not set -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_XXHASH=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZSTD_COMMON=y -CONFIG_ZSTD_COMPRESS=y -CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/bcm53xx/patches-6.12/030-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch b/target/linux/bcm53xx/patches-6.12/030-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch new file mode 100644 index 0000000000..707e4a31e9 --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/030-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch @@ -0,0 +1,56 @@ +From 5cbee5828219c4f7b33e96b5d8ce5e467b2857c8 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 1 Sep 2023 12:55:49 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Set MACs for D-Link DIR-885L +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Specify NVRAM access and use its "et2macaddr" NVMEM cell. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20230901105549.7076-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + .../dts/broadcom/bcm47094-dlink-dir-885l.dts | 16 ++++++++++++++++ + 1 file changed, 16 insertions(+) + +--- a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts ++++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts +@@ -25,6 +25,15 @@ + <0x88000000 0x08000000>; + }; + ++ nvram@1e3f0000 { ++ compatible = "brcm,nvram"; ++ reg = <0x1e3f0000 0x10000>; ++ ++ et2macaddr: et2macaddr { ++ #nvmem-cell-cells = <1>; ++ }; ++ }; ++ + nand_controller: nand-controller@18028000 { + nand@0 { + partitions { +@@ -112,6 +121,11 @@ + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; + }; + ++&gmac0 { ++ nvmem-cells = <&et2macaddr 0>; ++ nvmem-cell-names = "mac-address"; ++}; ++ + &spi_nor { + status = "okay"; + }; +@@ -142,6 +156,8 @@ + + port@4 { + label = "wan"; ++ nvmem-cells = <&et2macaddr 3>; ++ nvmem-cell-names = "mac-address"; + }; + + port@5 { diff --git a/target/linux/bcm53xx/patches-6.12/030-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch b/target/linux/bcm53xx/patches-6.12/030-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch new file mode 100644 index 0000000000..8a8066ba63 --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/030-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch @@ -0,0 +1,44 @@ +From a9e79863b62aaaefcdf469fc331bf482ae00db0d Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 1 Sep 2023 14:43:11 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Specify NVRAM access and use its "et1macaddr" NVMEM cell. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20230901124311.31156-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +--- a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts +@@ -25,6 +25,12 @@ + <0x88000000 0x08000000>; + }; + ++ nvram@1c080000 { ++ et1macaddr: et1macaddr { ++ #nvmem-cell-cells = <1>; ++ }; ++ }; ++ + leds { + compatible = "gpio-leds"; + +@@ -62,6 +68,11 @@ + }; + }; + ++&gmac0 { ++ nvmem-cells = <&et1macaddr 0>; ++ nvmem-cell-names = "mac-address"; ++}; ++ + &usb3_phy { + status = "okay"; + }; diff --git a/target/linux/bcm53xx/patches-6.12/030-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch b/target/linux/bcm53xx/patches-6.12/030-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch new file mode 100644 index 0000000000..842f47af42 --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/030-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch @@ -0,0 +1,57 @@ +From 81ea360a16978a4df61df9db56b171909bd659c0 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Sat, 16 Sep 2023 10:30:57 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / + MIT +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Move code added by Felix to the bcm-ns.dtsi which uses dual licensing. +That syncs more Northstar code to be based on the same licensing schema. + +This code was added in the commit 1ff80363524c ("ARM: BCM5301X: Add +profiling support"). + +Cc: Felix Fietkau +Signed-off-by: Rafał Miłecki +Acked-by: Felix Fietkau +Link: https://lore.kernel.org/r/20230916083057.10458-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/broadcom/bcm-ns.dtsi | 7 +++++++ + arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 7 ------- + 2 files changed, 7 insertions(+), 7 deletions(-) + +--- a/arch/arm/boot/dts/broadcom/bcm-ns.dtsi ++++ b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi +@@ -14,6 +14,13 @@ + #address-cells = <1>; + #size-cells = <1>; + ++ pmu { ++ compatible = "arm,cortex-a9-pmu"; ++ interrupts = ++ , ++ ; ++ }; ++ + chipcommon-a-bus@18000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x18000000 0x00001000>; +--- a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi +@@ -26,13 +26,6 @@ + }; + }; + +- pmu { +- compatible = "arm,cortex-a9-pmu"; +- interrupts = +- , +- ; +- }; +- + clocks { + #address-cells = <1>; + #size-cells = <1>; diff --git a/target/linux/bcm53xx/patches-6.12/030-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch b/target/linux/bcm53xx/patches-6.12/030-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch new file mode 100644 index 0000000000..960908100e --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/030-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch @@ -0,0 +1,104 @@ +From b8d4f7c1be04d66c37c119c501c87bccc4197694 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Sat, 16 Sep 2023 10:58:55 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / + MIT +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Move code added by Vivek to the bcm-ns.dtsi which uses dual licensing. +That syncs more Northstar code to be based on the same licensing schema. + +This code was added in the commit 37f6130ec39f ("ARM: dts: BCM5301X: +Make USB 3.0 PHY use MDIO PHY driver"). + +Cc: Vivek Unune +Signed-off-by: Rafał Miłecki +Acked-by: Vivek Unune +Link: https://lore.kernel.org/r/20230916085855.28375-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/broadcom/bcm-ns.dtsi | 27 ++++++++++++++++++++++++ + arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 27 ------------------------ + 2 files changed, 27 insertions(+), 27 deletions(-) + +--- a/arch/arm/boot/dts/broadcom/bcm-ns.dtsi ++++ b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi +@@ -327,6 +327,29 @@ + #address-cells = <1>; + }; + ++ mdio-mux@18003000 { ++ compatible = "mdio-mux-mmioreg", "mdio-mux"; ++ mdio-parent-bus = <&mdio>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x18003000 0x4>; ++ mux-mask = <0x200>; ++ ++ mdio@0 { ++ reg = <0x0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ usb3_phy: usb3-phy@10 { ++ compatible = "brcm,ns-ax-usb3-phy"; ++ reg = <0x10>; ++ usb3-dmp-syscon = <&usb3_dmp>; ++ #phy-cells = <0>; ++ status = "disabled"; ++ }; ++ }; ++ }; ++ + rng: rng@18004000 { + compatible = "brcm,bcm5301x-rng"; + reg = <0x18004000 0x14>; +@@ -467,6 +490,10 @@ + brcm,nand-has-wp; + }; + ++ usb3_dmp: syscon@18105000 { ++ reg = <0x18105000 0x1000>; ++ }; ++ + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; +--- a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi +@@ -62,33 +62,6 @@ + }; + }; + +- mdio-mux@18003000 { +- compatible = "mdio-mux-mmioreg", "mdio-mux"; +- mdio-parent-bus = <&mdio>; +- #address-cells = <1>; +- #size-cells = <0>; +- reg = <0x18003000 0x4>; +- mux-mask = <0x200>; +- +- mdio@0 { +- reg = <0x0>; +- #address-cells = <1>; +- #size-cells = <0>; +- +- usb3_phy: usb3-phy@10 { +- compatible = "brcm,ns-ax-usb3-phy"; +- reg = <0x10>; +- usb3-dmp-syscon = <&usb3_dmp>; +- #phy-cells = <0>; +- status = "disabled"; +- }; +- }; +- }; +- +- usb3_dmp: syscon@18105000 { +- reg = <0x18105000 0x1000>; +- }; +- + i2c0: i2c@18009000 { + compatible = "brcm,iproc-i2c"; + reg = <0x18009000 0x50>; diff --git a/target/linux/bcm53xx/patches-6.12/030-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch b/target/linux/bcm53xx/patches-6.12/030-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch new file mode 100644 index 0000000000..28f4d2b743 --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/030-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch @@ -0,0 +1,377 @@ +From 473baeab929444295b0530f8766e4becb6a08973 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 13 Oct 2023 12:33:13 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Explicitly disable unused switch CPU + ports +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +When redescribing ports I assumed that missing "label" (like "cpu") +means switch port isn't used. That was incorrect and I realized my +change made Linux always use the first (5) CPU port (there are 3 of +them). + +While above should technically be possible it often isn't correct: +1. Non-default switch ports are often connected to Ethernet interfaces + not fully covered by vendor setup (they may miss MACs) +2. On some devices non-default ports require specifying fixed link + +This fixes network connectivity for some devices. It was reported & +tested for Netgear R8000. It also affects Linksys EA9200 with its +downstream DTS. + +Fixes: ba4aebce23b2 ("ARM: dts: BCM5301X: Describe switch ports in the main DTS") +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20231013103314.10306-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + .../dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts | 8 ++++++++ + .../boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts | 8 ++++++++ + arch/arm/boot/dts/broadcom/bcm953012er.dts | 8 ++++++++ + 20 files changed, 160 insertions(+) + +--- a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi ++++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi +@@ -189,5 +189,13 @@ + port@8 { + status = "disabled"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts +@@ -93,5 +93,13 @@ + port@8 { + status = "disabled"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts +@@ -96,5 +96,13 @@ + port@8 { + status = "disabled"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts +@@ -130,5 +130,13 @@ + port@8 { + status = "disabled"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts +@@ -153,6 +153,14 @@ + port@8 { + status = "disabled"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; + +--- a/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts ++++ b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts +@@ -153,5 +153,13 @@ + port@8 { + status = "disabled"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts ++++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts +@@ -89,5 +89,13 @@ + port@8 { + status = "disabled"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts ++++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts +@@ -156,5 +156,13 @@ + port@8 { + status = "disabled"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts +@@ -235,6 +235,14 @@ + status = "disabled"; + }; + ++ port@5 { ++ status = "disabled"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ + port@8 { + label = "cpu"; + }; +--- a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts ++++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts +@@ -168,6 +168,14 @@ + status = "disabled"; + }; + ++ port@5 { ++ status = "disabled"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ + port@8 { + label = "cpu"; + }; +--- a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts ++++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts +@@ -200,6 +200,14 @@ + status = "disabled"; + }; + ++ port@5 { ++ status = "disabled"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ + port@8 { + label = "cpu"; + phy-mode = "rgmii"; +--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts ++++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts +@@ -115,5 +115,13 @@ + port@8 { + status = "disabled"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts ++++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts +@@ -128,5 +128,13 @@ + port@8 { + status = "disabled"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts ++++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts +@@ -115,5 +115,13 @@ + port@8 { + status = "disabled"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts ++++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts +@@ -83,5 +83,13 @@ + port@8 { + status = "disabled"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts ++++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts +@@ -155,5 +155,13 @@ + port@8 { + status = "disabled"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts ++++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts +@@ -166,5 +166,13 @@ + port@8 { + status = "disabled"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts ++++ b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts +@@ -132,6 +132,14 @@ + port@8 { + status = "disabled"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; + +--- a/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts ++++ b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts +@@ -193,6 +193,14 @@ + port@8 { + status = "disabled"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; + +--- a/arch/arm/boot/dts/broadcom/bcm953012er.dts ++++ b/arch/arm/boot/dts/broadcom/bcm953012er.dts +@@ -92,6 +92,14 @@ + port@8 { + status = "disabled"; + }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; + }; + }; + diff --git a/target/linux/bcm53xx/patches-6.12/030-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch b/target/linux/bcm53xx/patches-6.12/030-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch new file mode 100644 index 0000000000..85f093ff0d --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/030-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch @@ -0,0 +1,47 @@ +From d313b0e9070a7100ca55e64fe3b081d176d8806d Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 13 Oct 2023 12:33:14 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 + CPU ports +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Ports 5 and 7 are disabled by default because the standard use case is +for port 8 to manage all CPU directed traffic. For experimentation +purposes however it is desirable to provide adequate properties such +that people can experiment with using different ports without having to +figure out their configuration. Some of the use cases include but are +not limited to doubling or tripling the bandwidth by leveraging the +additional ports/Ethernet MAC combinations. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20231013103314.10306-2-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts +@@ -237,10 +237,20 @@ + + port@5 { + status = "disabled"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; + }; + + port@7 { + status = "disabled"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; + }; + + port@8 { diff --git a/target/linux/bcm53xx/patches-6.12/030-v6.7-0007-ARM-dts-BCM5301X-Set-switch-ports-for-Linksys-EA9200.patch b/target/linux/bcm53xx/patches-6.12/030-v6.7-0007-ARM-dts-BCM5301X-Set-switch-ports-for-Linksys-EA9200.patch new file mode 100644 index 0000000000..87b6ade5f6 --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/030-v6.7-0007-ARM-dts-BCM5301X-Set-switch-ports-for-Linksys-EA9200.patch @@ -0,0 +1,63 @@ +From 253358f373492608348136e569366d73cb969f6a Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Tue, 24 Oct 2023 09:26:05 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Set switch ports for Linksys EA9200 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This patch was developed as OpenWrt downstream change and was recently +confirmed to work as expected. + +Tested-by: Rani Hod +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20231024072605.32517-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + .../dts/broadcom/bcm4709-linksys-ea9200.dts | 38 +++++++++++++++++++ + 1 file changed, 38 insertions(+) + +--- a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts +@@ -47,3 +47,41 @@ + &usb3_phy { + status = "okay"; + }; ++ ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ label = "lan1"; ++ }; ++ ++ port@1 { ++ label = "lan2"; ++ }; ++ ++ port@2 { ++ label = "lan3"; ++ }; ++ ++ port@3 { ++ label = "lan4"; ++ }; ++ ++ port@4 { ++ label = "wan"; ++ }; ++ ++ port@5 { ++ status = "disabled"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ label = "cpu"; ++ }; ++ }; ++}; diff --git a/target/linux/bcm53xx/patches-6.12/040-v6.11-ARM-dts-broadcom-convert-NVMEM-content-to-layout-syntax.patch b/target/linux/bcm53xx/patches-6.12/040-v6.11-ARM-dts-broadcom-convert-NVMEM-content-to-layout-syntax.patch new file mode 100644 index 0000000000..864fd01629 --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/040-v6.11-ARM-dts-broadcom-convert-NVMEM-content-to-layout-syntax.patch @@ -0,0 +1,64 @@ +From ed0d78c75ca93c9f1d7f0d08ac5abe0de71fe312 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 16 May 2024 10:47:37 +0200 +Subject: [PATCH] ARM: dts: broadcom: convert NVMEM content to layout syntax +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Use cleaner (and non-deprecated) bindings syntax. See commit +bd912c991d2e ("dt-bindings: nvmem: layouts: add fixed-layout") for +details. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20240516084737.2789-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts | 12 ++++++++---- + .../dts/broadcom/bcm958625-meraki-mx6x-common.dtsi | 12 ++++++++---- + 2 files changed, 16 insertions(+), 8 deletions(-) + +--- a/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts ++++ b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts +@@ -223,11 +223,15 @@ + reg = <0x50>; + pagesize = <32>; + read-only; +- #address-cells = <1>; +- #size-cells = <1>; + +- mac_address: mac-address@66 { +- reg = <0x66 0x6>; ++ nvmem-layout { ++ compatible = "fixed-layout"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ mac_address: mac-address@66 { ++ reg = <0x66 0x6>; ++ }; + }; + }; + }; +--- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi ++++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi +@@ -55,11 +55,15 @@ + reg = <0x50>; + pagesize = <32>; + read-only; +- #address-cells = <1>; +- #size-cells = <1>; + +- mac_address: mac-address@66 { +- reg = <0x66 0x6>; ++ nvmem-layout { ++ compatible = "fixed-layout"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ mac_address: mac-address@66 { ++ reg = <0x66 0x6>; ++ }; + }; + }; + }; diff --git a/target/linux/bcm53xx/patches-6.12/050-v6.13-ARM-dts-meraki-mr26-set-mac-address-for-gmac0.patch b/target/linux/bcm53xx/patches-6.12/050-v6.13-ARM-dts-meraki-mr26-set-mac-address-for-gmac0.patch new file mode 100644 index 0000000000..f6a6f819d1 --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/050-v6.13-ARM-dts-meraki-mr26-set-mac-address-for-gmac0.patch @@ -0,0 +1,52 @@ +From ad1915e2070cf832bfb81dcbeb44b073c09e6dcc Mon Sep 17 00:00:00 2001 +From: Rosen Penev +Date: Sun, 20 Oct 2024 18:51:47 -0700 +Subject: [PATCH] ARM: dts: meraki-mr26: set mac address for gmac0 + +Currently this needs to be done in userspace. + +Signed-off-by: Rosen Penev +Link: https://lore.kernel.org/r/20241021015147.172700-1-rosenp@gmail.com +Signed-off-by: Florian Fainelli +--- + .../dts/broadcom/bcm53015-meraki-mr26.dts | 20 +++++++++++++++++++ + 1 file changed, 20 insertions(+) + +--- a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts ++++ b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts +@@ -59,6 +59,9 @@ + + &gmac0 { + status = "okay"; ++ ++ nvmem-cells = <&macaddr_board_config_66>; ++ nvmem-cell-names = "mac-address"; + }; + + &gmac1 { +@@ -102,8 +105,25 @@ + }; + + partition@800000 { ++ compatible = "linux,ubi"; + label = "ubi"; + reg = <0x800000 0x7780000>; ++ ++ volumes { ++ ubi-volume-board-config { ++ volname = "board-config"; ++ ++ nvmem-layout { ++ compatible = "fixed-layout"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ macaddr_board_config_66: macaddr@66 { ++ reg = <0x66 0x6>; ++ }; ++ }; ++ }; ++ }; + }; + }; + }; diff --git a/target/linux/bcm53xx/patches-6.12/051-ARM-dts-meraki-mr26-wifi-MACs-in-dts.patch b/target/linux/bcm53xx/patches-6.12/051-ARM-dts-meraki-mr26-wifi-MACs-in-dts.patch new file mode 100644 index 0000000000..fd31438cdb --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/051-ARM-dts-meraki-mr26-wifi-MACs-in-dts.patch @@ -0,0 +1,67 @@ +From c18e0b14b466fb0aa17c8ca6e61f16ba1254aebd Mon Sep 17 00:00:00 2001 +From: Rosen Penev +Date: Sun, 24 Nov 2024 12:58:51 -0800 +Subject: [PATCH] ARM: dts: meraki-mr26: wifi MACs in dts + +OPENWRT HACK. Probably will not be accepted upstream. + +Signed-off-by: Rosen Penev +--- + .../dts/broadcom/bcm53015-meraki-mr26.dts | 31 ++++++++++++++++++- + 1 file changed, 30 insertions(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts ++++ b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts +@@ -60,7 +60,7 @@ + &gmac0 { + status = "okay"; + +- nvmem-cells = <&macaddr_board_config_66>; ++ nvmem-cells = <&macaddr_board_config_66 0>; + nvmem-cell-names = "mac-address"; + }; + +@@ -74,6 +74,33 @@ + status = "disabled"; + }; + ++&pcie0 { ++ wifi@0,0 { ++ reg = <0x0000 0 0 0 0>; ++ compatible = "brcm,bcm43431"; ++ nvmem-cells = <&macaddr_board_config_66 1>; ++ nvmem-cell-names = "mac-address"; ++ }; ++}; ++ ++&pcie1 { ++ wifi@0,0 { ++ reg = <0x0000 0 0 0 0>; ++ compatible = "brcm,bcm43431"; ++ nvmem-cells = <&macaddr_board_config_66 2>; ++ nvmem-cell-names = "mac-address"; ++ }; ++}; ++ ++&pcie2 { ++ wifi@0,0 { ++ reg = <0x0000 0 0 0 0>; ++ compatible = "brcm,bcm43428"; ++ nvmem-cells = <&macaddr_board_config_66 3>; ++ nvmem-cell-names = "mac-address"; ++ }; ++}; ++ + &nandcs { + partitions { + compatible = "fixed-partitions"; +@@ -119,7 +146,9 @@ + #size-cells = <1>; + + macaddr_board_config_66: macaddr@66 { ++ compatible = "mac-base"; + reg = <0x66 0x6>; ++ #nvmem-cell-cells = <1>; + }; + }; + }; diff --git a/target/linux/bcm53xx/patches-6.12/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch b/target/linux/bcm53xx/patches-6.12/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch new file mode 100644 index 0000000000..dbf4569b4e --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch @@ -0,0 +1,43 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Tue, 13 Apr 2021 18:25:20 +0200 +Subject: [PATCH] mtd: parsers: trx: parse "firmware" MTD partitions only +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Parsing every partition with "compatible" set to "brcm,trx" results in +parsing both: firmware partition and failsafe partition on devices that +implement failsafe booting. This affects e.g. Linksys EA9500 which has: + +partition@200000 { + reg = <0x0200000 0x01d00000>; + compatible = "linksys,ns-firmware", "brcm,trx"; +}; + +partition@1f00000 { + reg = <0x01f00000 0x01d00000>; + compatible = "linksys,ns-firmware", "brcm,trx"; +}; + +Check for MTD partition name "firmware" before parsing. Recently added +ofpart_linksys_ns.c creates "firmware" and "failsafe" depending on +bootloader setup. + +Signed-off-by: Rafał Miłecki +--- + drivers/mtd/parsers/parser_trx.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/mtd/parsers/parser_trx.c ++++ b/drivers/mtd/parsers/parser_trx.c +@@ -92,6 +92,10 @@ static int parser_trx_parse(struct mtd_i + if (err != 0 && err != -EINVAL) + pr_err("failed to parse \"brcm,trx-magic\" DT attribute, using default: %d\n", err); + ++ /* Don't parse any failsafe / backup partitions */ ++ if (strcmp(mtd->name, "firmware")) ++ return -ENOENT; ++ + parts = kcalloc(TRX_PARSER_MAX_PARTS, sizeof(struct mtd_partition), + GFP_KERNEL); + if (!parts) diff --git a/target/linux/bcm53xx/patches-6.12/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-6.12/180-usb-xhci-add-support-for-performing-fake-doorbell.patch new file mode 100644 index 0000000000..9484546935 --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/180-usb-xhci-add-support-for-performing-fake-doorbell.patch @@ -0,0 +1,113 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Sat, 1 Oct 2016 22:54:48 +0200 +Subject: [PATCH] usb: xhci: add support for performing fake doorbell + +Broadcom's Northstar XHCI controllers seem to need a special start +procedure to work correctly. There isn't any official documentation of +this, the problem is that controller doesn't detect any connected +devices with default setup. Moreover connecting USB device to controller +that doesn't run properly can cause SoC's watchdog issues. + +A workaround that was successfully tested on multiple devices is to +perform a fake doorbell. This patch adds code for doing this and enables +it on BCM4708 family. +--- + drivers/usb/host/xhci-plat.c | 6 +++++ + drivers/usb/host/xhci.c | 63 +++++++++++++++++++++++++++++++++++++++++--- + drivers/usb/host/xhci.h | 1 + + 3 files changed, 67 insertions(+), 3 deletions(-) + +--- a/drivers/usb/host/xhci-plat.c ++++ b/drivers/usb/host/xhci-plat.c +@@ -77,8 +77,13 @@ static int xhci_priv_resume_quirk(struct + static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) + { + struct xhci_plat_priv *priv = xhci_to_priv(xhci); ++ struct platform_device *pdev = to_platform_device(dev); ++ struct device_node *node = pdev->dev.of_node; + + xhci->quirks |= priv->quirks; ++ ++ if (node && of_machine_is_compatible("brcm,bcm4708")) ++ xhci->quirks |= XHCI_FAKE_DOORBELL; + } + + /* called during probe() after chip reset completes */ +--- a/drivers/usb/host/xhci.c ++++ b/drivers/usb/host/xhci.c +@@ -163,6 +163,49 @@ int xhci_start(struct xhci_hcd *xhci) + return ret; + } + ++/** ++ * xhci_fake_doorbell - Perform a fake doorbell on a specified slot ++ * ++ * Some controllers require a fake doorbell to start correctly. Without that ++ * they simply don't detect any devices. ++ */ ++static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id) ++{ ++ u32 temp; ++ ++ /* Alloc a virt device for that slot */ ++ if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) { ++ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n"); ++ return -ENOMEM; ++ } ++ ++ /* Ring fake doorbell for slot_id ep 0 */ ++ xhci_ring_ep_doorbell(xhci, slot_id, 0, 0); ++ usleep_range(1000, 1500); ++ ++ /* Read the status to check if HSE is set or not */ ++ temp = readl(&xhci->op_regs->status); ++ ++ /* Clear HSE if set */ ++ if (temp & STS_FATAL) { ++ xhci_dbg(xhci, "HSE problem detected, status: 0x%08x\n", temp); ++ temp &= ~0x1fff; ++ temp |= STS_FATAL; ++ writel(temp, &xhci->op_regs->status); ++ usleep_range(1000, 1500); ++ readl(&xhci->op_regs->status); ++ } ++ ++ /* Free virt device */ ++ xhci_free_virt_device(xhci, xhci->devs[slot_id], slot_id); ++ ++ /* We're done if controller is already running */ ++ if (readl(&xhci->op_regs->command) & CMD_RUN) ++ return 0; ++ ++ return xhci_start(xhci); ++} ++ + /* + * Reset a halted HC. + * +@@ -500,6 +543,15 @@ static int xhci_run_finished(struct xhci + return -ENODEV; + } + ++ if (xhci->quirks & XHCI_FAKE_DOORBELL) { ++ int err = xhci_fake_doorbell(xhci, 1); ++ if (err) { ++ xhci_halt(xhci); ++ spin_unlock_irqrestore(&xhci->lock, flags); ++ return err; ++ } ++ } ++ + xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; + + if (xhci->quirks & XHCI_NEC_HOST) +--- a/drivers/usb/host/xhci.h ++++ b/drivers/usb/host/xhci.h +@@ -1660,6 +1660,7 @@ struct xhci_hcd { + #define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48) + #define XHCI_ETRON_HOST BIT_ULL(49) + #define XHCI_LIMIT_ENDPOINT_INTERVAL_9 BIT_ULL(50) ++#define XHCI_FAKE_DOORBELL BIT_ULL(51) + + unsigned int num_active_eps; + unsigned int limit_active_eps; diff --git a/target/linux/bcm53xx/patches-6.12/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch b/target/linux/bcm53xx/patches-6.12/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch new file mode 100644 index 0000000000..789326310a --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch @@ -0,0 +1,111 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 24 Sep 2014 22:14:07 +0200 +Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Broadcom devices have broken CFE (bootloader) that leaves hardware in an +invalid state. It causes problems with booting Linux. On Northstar +devices kernel was randomly hanging in ~25% of tries during early init. +Hangs used to happen at random places in the start_kernel. On BCM53573 +kernel doesn't even seem to start booting. + +To workaround this problem we need to do following very early: +1) Clear 2 following bits in the SCTLR register: +#define CR_M (1 << 0) /* MMU enable */ +#define CR_C (1 << 2) /* Dcache enable */ +2) Flush the whole D-cache +3) Disable L2 cache + +Unfortunately this patch is not upstreamable as it does above things +unconditionally. We can't check if we are running on Broadcom platform +in any safe way and doing such hacks with ARCH_MULTI_V7 is unacceptable +as it could break other devices support. + +Signed-off-by: Rafał Miłecki +--- + +--- a/arch/arm/boot/compressed/Makefile ++++ b/arch/arm/boot/compressed/Makefile +@@ -36,6 +36,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y) + OBJS += ll_char_wr.o font.o + endif + ++ifeq ($(CONFIG_ARCH_BCM_5301X),y) ++OBJS += head-bcm_5301x-mpcore.o ++OBJS += cache-v7-min.o ++endif ++ + ifeq ($(CONFIG_ARCH_SA1100),y) + OBJS += head-sa1100.o + endif +--- /dev/null ++++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S +@@ -0,0 +1,37 @@ ++/* ++ * ++ * Platform specific tweaks. This is merged into head.S by the linker. ++ * ++ */ ++ ++#include ++#include ++#include ++ ++ .section ".start", "ax" ++ ++/* ++ * This code section is spliced into the head code by the linker ++ */ ++ ++__plat_uncompress_start: ++ ++ @ Preserve r8/r7 i.e. kernel entry values ++ mov r12, r8 ++ ++ @ Clear MMU enable and Dcache enable bits ++ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR ++ bic r0, #CR_C|CR_M ++ mcr p15, 0, r0, c1, c0, 0 @ Write SCTLR ++ nop ++ ++ @ Call the cache invalidation routine ++ bl v7_flush_dcache_all ++ nop ++ mov r0,#0 ++ ldr r3, =0x19022000 @ L2 cache controller, control reg ++ str r0, [r3, #0x100] @ Disable L2 cache ++ nop ++ ++ @ Restore ++ mov r8, r12 +--- a/arch/arm/boot/compressed/cache-v7-min.S ++++ b/arch/arm/boot/compressed/cache-v7-min.S +@@ -12,6 +12,7 @@ + + #include + #include ++#include + + __INIT + +@@ -63,7 +64,7 @@ loop2: + ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11 + THUMB( lsl r6, r9, r2 ) + THUMB( orr r11, r11, r6 ) @ factor index number into r11 +- mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way ++ mcr p15, 0, r11, c7, c6, 2 @ clean & invalidate by set/way + subs r9, r9, #1 @ decrement the index + bge loop2 + subs r4, r4, #1 @ decrement the way +--- a/arch/arm/boot/compressed/vmlinux.lds.S ++++ b/arch/arm/boot/compressed/vmlinux.lds.S +@@ -41,6 +41,7 @@ SECTIONS + *(.start) + *(.text) + *(.text.*) ++ *(.init.text) + ARM_STUBS_TEXT + } + .table : ALIGN(4) { diff --git a/target/linux/bcm53xx/patches-6.12/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch b/target/linux/bcm53xx/patches-6.12/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch new file mode 100644 index 0000000000..9cfc3aac15 --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch @@ -0,0 +1,675 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Subject: [PATCH] ARM: dts: BCM5301X: Specify switch ports for remaining + devices +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: Rafał Miłecki +--- + +--- a/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts +@@ -92,3 +92,41 @@ + &usb3_phy { + status = "okay"; + }; ++ ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ label = "lan1"; ++ }; ++ ++ port@1 { ++ label = "lan2"; ++ }; ++ ++ port@2 { ++ label = "lan3"; ++ }; ++ ++ port@3 { ++ label = "lan4"; ++ }; ++ ++ port@4 { ++ label = "wan"; ++ }; ++ ++ port@5 { ++ label = "cpu"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; ++ }; ++}; +--- a/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts +@@ -83,3 +83,41 @@ + &usb3_phy { + status = "okay"; + }; ++ ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ label = "wan"; ++ }; ++ ++ port@1 { ++ label = "lan1"; ++ }; ++ ++ port@2 { ++ label = "lan2"; ++ }; ++ ++ port@3 { ++ label = "lan3"; ++ }; ++ ++ port@4 { ++ label = "lan4"; ++ }; ++ ++ port@5 { ++ label = "cpu"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; ++ }; ++}; +--- a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts +@@ -149,3 +149,41 @@ + &usb3_phy { + status = "okay"; + }; ++ ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ label = "lan1"; ++ }; ++ ++ port@1 { ++ label = "lan2"; ++ }; ++ ++ port@2 { ++ label = "lan3"; ++ }; ++ ++ port@3 { ++ label = "lan4"; ++ }; ++ ++ port@4 { ++ label = "wan"; ++ }; ++ ++ port@5 { ++ label = "cpu"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; ++ }; ++}; +--- a/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts +@@ -46,3 +46,41 @@ + &usb3_phy { + status = "okay"; + }; ++ ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ label = "lan1"; ++ }; ++ ++ port@1 { ++ label = "lan2"; ++ }; ++ ++ port@2 { ++ label = "lan3"; ++ }; ++ ++ port@3 { ++ label = "lan4"; ++ }; ++ ++ port@4 { ++ label = "wan"; ++ }; ++ ++ port@5 { ++ label = "cpu"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; ++ }; ++}; +--- a/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts +@@ -43,3 +43,41 @@ + &usb3_phy { + status = "okay"; + }; ++ ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ label = "lan1"; ++ }; ++ ++ port@1 { ++ label = "lan2"; ++ }; ++ ++ port@2 { ++ label = "lan3"; ++ }; ++ ++ port@3 { ++ label = "lan4"; ++ }; ++ ++ port@4 { ++ label = "wan"; ++ }; ++ ++ port@5 { ++ label = "cpu"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; ++ }; ++}; +--- a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts +@@ -86,3 +86,41 @@ + &usb3_phy { + status = "okay"; + }; ++ ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ label = "lan1"; ++ }; ++ ++ port@1 { ++ label = "lan2"; ++ }; ++ ++ port@2 { ++ label = "lan3"; ++ }; ++ ++ port@3 { ++ label = "lan4"; ++ }; ++ ++ port@4 { ++ label = "wan"; ++ }; ++ ++ port@5 { ++ label = "cpu"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; ++ }; ++}; +--- a/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts ++++ b/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts +@@ -77,3 +77,41 @@ + &usb3_phy { + status = "okay"; + }; ++ ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ label = "wan"; ++ }; ++ ++ port@1 { ++ label = "lan1"; ++ }; ++ ++ port@2 { ++ label = "lan2"; ++ }; ++ ++ port@3 { ++ label = "lan3"; ++ }; ++ ++ port@4 { ++ label = "lan4"; ++ }; ++ ++ port@5 { ++ label = "cpu"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; ++ }; ++}; +--- a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts +@@ -77,6 +77,40 @@ + status = "okay"; + }; + ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ label = "wan"; ++ }; ++ ++ port@1 { ++ label = "lan1"; ++ }; ++ ++ port@2 { ++ label = "lan2"; ++ }; ++ ++ port@3 { ++ label = "lan3"; ++ }; ++ ++ port@5 { ++ status = "disabled"; ++ }; ++ ++ port@7 { ++ label = "cpu"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; ++ }; ++}; ++ + &nandcs { + partitions { + compatible = "fixed-partitions"; +--- a/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts +@@ -130,3 +130,41 @@ + &usb3_phy { + status = "okay"; + }; ++ ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ label = "lan1"; ++ }; ++ ++ port@1 { ++ label = "lan2"; ++ }; ++ ++ port@2 { ++ label = "lan3"; ++ }; ++ ++ port@3 { ++ label = "lan4"; ++ }; ++ ++ port@4 { ++ label = "wan"; ++ }; ++ ++ port@5 { ++ label = "cpu"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; ++ }; ++}; +--- a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts +@@ -104,3 +104,41 @@ + &usb3_phy { + status = "okay"; + }; ++ ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ label = "wan"; ++ }; ++ ++ port@1 { ++ label = "lan1"; ++ }; ++ ++ port@2 { ++ label = "lan2"; ++ }; ++ ++ port@3 { ++ label = "lan3"; ++ }; ++ ++ port@4 { ++ label = "lan4"; ++ }; ++ ++ port@5 { ++ label = "cpu"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; ++ }; ++}; +--- a/arch/arm/boot/dts/broadcom/bcm47094-netgear-r8500.dts ++++ b/arch/arm/boot/dts/broadcom/bcm47094-netgear-r8500.dts +@@ -94,3 +94,41 @@ + &usb3_phy { + status = "okay"; + }; ++ ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ label = "wan"; ++ }; ++ ++ port@1 { ++ label = "lan1"; ++ }; ++ ++ port@2 { ++ label = "lan2"; ++ }; ++ ++ port@3 { ++ label = "lan3"; ++ }; ++ ++ port@4 { ++ label = "lan4"; ++ }; ++ ++ port@5 { ++ status = "disabled"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ label = "cpu"; ++ }; ++ }; ++}; +--- a/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts ++++ b/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts +@@ -38,6 +38,40 @@ + status = "okay"; + }; + ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ label = "lan1"; ++ }; ++ ++ port@1 { ++ label = "lan2"; ++ }; ++ ++ port@2 { ++ label = "lan3"; ++ }; ++ ++ port@3 { ++ label = "wan"; ++ }; ++ ++ port@5 { ++ label = "cpu"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; ++ }; ++}; ++ + &nandcs { + partitions { + compatible = "fixed-partitions"; +--- a/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts ++++ b/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts +@@ -91,6 +91,44 @@ + }; + }; + ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ label = "wan"; ++ }; ++ ++ port@1 { ++ label = "lan1"; ++ }; ++ ++ port@2 { ++ label = "lan2"; ++ }; ++ ++ port@3 { ++ label = "lan3"; ++ }; ++ ++ port@4 { ++ label = "lan4"; ++ }; ++ ++ port@5 { ++ label = "cpu"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; ++ }; ++}; ++ + &spi_nor { + status = "okay"; + +--- a/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts ++++ b/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts +@@ -100,6 +100,44 @@ + vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ label = "wan"; ++ }; ++ ++ port@1 { ++ label = "lan1"; ++ }; ++ ++ port@2 { ++ label = "lan2"; ++ }; ++ ++ port@3 { ++ label = "lan3"; ++ }; ++ ++ port@4 { ++ label = "lan4"; ++ }; ++ ++ port@5 { ++ label = "cpu"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; ++ }; ++}; ++ + &spi_nor { + status = "okay"; + +--- a/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts ++++ b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts +@@ -107,3 +107,42 @@ + &usb3_phy { + status = "okay"; + }; ++ ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ label = "lan1"; ++ }; ++ ++ port@1 { ++ label = "lan2"; ++ }; ++ ++ port@2 { ++ label = "lan3"; ++ }; ++ ++ port@3 { ++ label = "lan4"; ++ }; ++ ++ port@4 { ++ label = "wan"; ++ }; ++ ++ port@5 { ++ label = "cpu"; ++ }; ++ ++ port@7 { ++ status = "disabled"; ++ }; ++ ++ port@8 { ++ status = "disabled"; ++ }; ++ }; ++}; ++ diff --git a/target/linux/bcm53xx/patches-6.12/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-6.12/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch new file mode 100644 index 0000000000..053e5347d1 --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch @@ -0,0 +1,64 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: Rafał Miłecki +--- + +--- a/arch/arm/boot/dts/broadcom/Makefile ++++ b/arch/arm/boot/dts/broadcom/Makefile +@@ -68,6 +68,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm4709-buffalo-wxr-1900dhp.dtb \ + bcm4709-linksys-ea9200.dtb \ + bcm4709-netgear-r7000.dtb \ ++ bcm4709-netgear-r7900.dtb \ + bcm4709-netgear-r8000.dtb \ + bcm4709-tplink-archer-c9-v1.dtb \ + bcm47094-asus-rt-ac3100.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7900.dts +@@ -0,0 +1,42 @@ ++/* ++ * Broadcom BCM470X / BCM5301X ARM platform code. ++ * DTS for Netgear R7900 ++ * ++ * Copyright (C) 2016 Rafał Miłecki ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm4709.dtsi" ++#include "bcm5301x-nand-cs0-bch8.dtsi" ++ ++/ { ++ compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708"; ++ model = "Netgear R7900"; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200"; ++ }; ++ ++ memory { ++ reg = <0x00000000 0x08000000 ++ 0x88000000 0x08000000>; ++ }; ++ ++ axi@18000000 { ++ usb3@23000 { ++ reg = <0x00023000 0x1000>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; diff --git a/target/linux/bcm53xx/patches-6.12/332-Meraki-MX6X-partition-fixups.patch b/target/linux/bcm53xx/patches-6.12/332-Meraki-MX6X-partition-fixups.patch new file mode 100644 index 0000000000..9743c99f28 --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/332-Meraki-MX6X-partition-fixups.patch @@ -0,0 +1,52 @@ +From 35bba88e75311242841dde83073c211310ec0259 Mon Sep 17 00:00:00 2001 +From: Matthew Hagan +Date: Wed, 4 May 2022 08:07:06 +0100 +Subject: [PATCH] bcm53xx: partition fixups for Meraki MX64/MX65 + +We need to enlarge the u-boot partition to add extra features like UBI +booting. The shmoo and newly created env partitions can easily be moved +to the nvram partition. This fixup allows u-boot to be enlarged to up to +1MiB. + +Signed-off-by: Matthew Hagan +--- + arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi | 20 ++++++++++++-------- + 1 file changed, 12 insertions(+), 8 deletions(-) + +--- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi ++++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi +@@ -84,13 +84,7 @@ + + partition@0 { + label = "u-boot"; +- reg = <0x0 0x80000>; +- read-only; +- }; +- +- partition@80000 { +- label = "shmoo"; +- reg = <0x80000 0x80000>; ++ reg = <0x0 0x100000>; + read-only; + }; + +@@ -101,7 +95,18 @@ + + partition@400000 { + label = "nvram"; +- reg = <0x400000 0x100000>; ++ reg = <0x400000 0x40000>; ++ }; ++ ++ partition@440000 { ++ label = "u-boot-env"; ++ reg = <0x440000 0x40000>; ++ }; ++ ++ partition@480000 { ++ label = "shmoo"; ++ reg = <0x480000 0x80000>; ++ read-only; + }; + + partition@500000 { diff --git a/target/linux/bcm53xx/patches-6.12/333-bcm53xx-dts-meraki-mx6x-add-OpenWrt-specific-LED-ali.patch b/target/linux/bcm53xx/patches-6.12/333-bcm53xx-dts-meraki-mx6x-add-OpenWrt-specific-LED-ali.patch new file mode 100644 index 0000000000..950e85be9c --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/333-bcm53xx-dts-meraki-mx6x-add-OpenWrt-specific-LED-ali.patch @@ -0,0 +1,83 @@ +From 9f4e68261b89df87457f46999c471d11754b5de2 Mon Sep 17 00:00:00 2001 +From: Lech Perczak +Date: Sun, 6 Oct 2024 15:57:44 +0200 +Subject: [PATCH] bcm53xx: dts: meraki-mx6x: add OpenWrt-specific LED aliases + +Assign green power LED for "boot", "running", orange for "upgrade" and +red for "failsafe" functions - the same as done for MR33 and MR74. + +Signed-off-by: Lech Perczak +--- + arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi | 9 ++++++++- + arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi | 8 +++++++- + .../boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi | 4 ++-- + 3 files changed, 17 insertions(+), 4 deletions(-) + +--- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi ++++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi +@@ -8,6 +8,13 @@ + #include "bcm958625-meraki-mx6x-common.dtsi" + + / { ++ aliases { ++ led-boot = &led_power; ++ led-running = &led_power; ++ led-upgrade = &led_fault; ++ led-failsafe = &led_failsafe; ++ }; ++ + keys { + compatible = "gpio-keys-polled"; + autorepeat; +@@ -55,7 +62,7 @@ + gpios = <&gpioa 26 GPIO_ACTIVE_LOW>; + }; + +- led-4 { ++ led_fault: led-4 { + /* amber:power */ + function = LED_FUNCTION_FAULT; + color = ; +--- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi ++++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi +@@ -8,6 +8,12 @@ + #include "bcm958625-meraki-mx6x-common.dtsi" + + / { ++ aliases { ++ led-boot = &led_power; ++ led-running = &led_power; ++ led-upgrade = &led_fault; ++ led-failsafe = &led_failsafe; ++ }; + + keys { + compatible = "gpio-keys-polled"; +@@ -104,7 +110,7 @@ + gpios = <&gpioa 29 GPIO_ACTIVE_LOW>; + }; + +- led-a { ++ led_fault: led-a { + /* amber:power */ + function = LED_FUNCTION_FAULT; + color = ; +--- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi ++++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi +@@ -14,14 +14,14 @@ + pwm-leds { + compatible = "pwm-leds"; + +- led-1 { ++ led_failsafe: led-1 { + function = LED_FUNCTION_INDICATOR; + color = ; + pwms = <&pwm 1 50000>; + max-brightness = <255>; + }; + +- led-2 { ++ led_power: led-2 { + function = LED_FUNCTION_POWER; + color = ; + pwms = <&pwm 2 50000>; diff --git a/target/linux/bcm53xx/patches-6.12/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch b/target/linux/bcm53xx/patches-6.12/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch new file mode 100644 index 0000000000..e6140d9a70 --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch @@ -0,0 +1,59 @@ +From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 16 Oct 2014 20:52:16 +0200 +Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: Rafał Miłecki +--- + drivers/mtd/ubi/attach.c | 5 +++++ + drivers/mtd/ubi/io.c | 4 ++++ + drivers/mtd/ubi/ubi.h | 1 + + 3 files changed, 10 insertions(+) + +--- a/drivers/mtd/ubi/attach.c ++++ b/drivers/mtd/ubi/attach.c +@@ -82,6 +82,9 @@ static int self_check_ai(struct ubi_devi + #define AV_ADD BIT(1) + #define AV_FIND_OR_ADD (AV_FIND | AV_ADD) + ++/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */ ++bool erase_all_next; ++ + /** + * find_or_add_av - internal function to find a volume, add a volume or do + * both (find and add if missing). +@@ -1580,6 +1583,8 @@ int ubi_attach(struct ubi_device *ubi, i + if (!ai) + return -ENOMEM; + ++ erase_all_next = false; ++ + #ifdef CONFIG_MTD_UBI_FASTMAP + /* On small flash devices we disable fastmap in any case. */ + if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) { +--- a/drivers/mtd/ubi/io.c ++++ b/drivers/mtd/ubi/io.c +@@ -717,6 +717,10 @@ int ubi_io_read_ec_hdr(struct ubi_device + } + + magic = be32_to_cpu(ec_hdr->magic); ++ if (magic == 0xdeadc0de) ++ erase_all_next = true; ++ if (erase_all_next) ++ return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF; + if (magic != UBI_EC_HDR_MAGIC) { + if (mtd_is_eccerr(read_err)) + return UBI_IO_BAD_HDR_EBADMSG; +--- a/drivers/mtd/ubi/ubi.h ++++ b/drivers/mtd/ubi/ubi.h +@@ -822,6 +822,7 @@ extern struct mutex ubi_devices_mutex; + extern struct blocking_notifier_head ubi_notifiers; + + /* attach.c */ ++extern bool erase_all_next; + struct ubi_ainf_peb *ubi_alloc_aeb(struct ubi_attach_info *ai, int pnum, + int ec); + void ubi_free_aeb(struct ubi_attach_info *ai, struct ubi_ainf_peb *aeb); diff --git a/target/linux/bcm53xx/patches-6.12/600-net-disable-GRO-by-default.patch b/target/linux/bcm53xx/patches-6.12/600-net-disable-GRO-by-default.patch new file mode 100644 index 0000000000..fd41824383 --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/600-net-disable-GRO-by-default.patch @@ -0,0 +1,36 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 20 Jun 2022 10:01:18 +0200 +Subject: [PATCH] net: disable GRO by default +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +In many cases GRO improves network performance however it comes at a +cost of chacksums calculations. In case of slow CPU and missing hardware +csum calculation support GRO can actually decrease network speed. + +On BCM4708 *disabling* GRO results in following NAT masquarade speed +changes: +1. 364 Mb/s → 396 Mb/s (packet steering disabled) +2. 341 Mb/s → 566 Mb/s (packet steering enabled) + +Signed-off-by: Rafał Miłecki +--- + include/linux/netdev_features.h | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/include/linux/netdev_features.h ++++ b/include/linux/netdev_features.h +@@ -243,10 +243,10 @@ static inline int find_next_netdev_featu + #define NETIF_F_UPPER_DISABLES NETIF_F_LRO + + /* changeable features with no special hardware requirements */ +-#define NETIF_F_SOFT_FEATURES (NETIF_F_GSO | NETIF_F_GRO | NETIF_F_GRO_FRAGLIST) ++#define NETIF_F_SOFT_FEATURES (NETIF_F_GSO) + + /* Changeable features with no special hardware requirements that defaults to off. */ +-#define NETIF_F_SOFT_FEATURES_OFF (NETIF_F_GRO_UDP_FWD) ++#define NETIF_F_SOFT_FEATURES_OFF (NETIF_F_GRO_UDP_FWD | NETIF_F_GRO | NETIF_F_GRO_FRAGLIST) + + #define NETIF_F_VLAN_FEATURES (NETIF_F_HW_VLAN_CTAG_FILTER | \ + NETIF_F_HW_VLAN_CTAG_RX | \ diff --git a/target/linux/bcm53xx/patches-6.12/905-BCM53573-minor-hacks.patch b/target/linux/bcm53xx/patches-6.12/905-BCM53573-minor-hacks.patch new file mode 100644 index 0000000000..44573cb46a --- /dev/null +++ b/target/linux/bcm53xx/patches-6.12/905-BCM53573-minor-hacks.patch @@ -0,0 +1,80 @@ +From 6f1c62440eb6846cb8045d7a5480ec7bbe47c96f Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 15 Aug 2016 10:30:41 +0200 +Subject: [PATCH] BCM53573 minor hacks +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: Rafał Miłecki +--- + +--- a/arch/arm/boot/dts/broadcom/bcm53573.dtsi ++++ b/arch/arm/boot/dts/broadcom/bcm53573.dtsi +@@ -54,6 +54,7 @@ + , + , + ; ++ clocks = <&ilp>; + }; + + clocks { +--- a/drivers/bcma/main.c ++++ b/drivers/bcma/main.c +@@ -331,14 +331,6 @@ static int bcma_register_devices(struct + } + #endif + +-#ifdef CONFIG_BCMA_SFLASH +- if (bus->drv_cc.sflash.present) { +- err = platform_device_register(&bcma_sflash_dev); +- if (err) +- bcma_err(bus, "Error registering serial flash\n"); +- } +-#endif +- + #ifdef CONFIG_BCMA_NFLASH + if (bus->drv_cc.nflash.present) { + err = platform_device_register(&bcma_nflash_dev); +@@ -418,6 +410,14 @@ int bcma_bus_register(struct bcma_bus *b + bcma_register_core(bus, core); + } + ++#ifdef CONFIG_BCMA_SFLASH ++ if (bus->drv_cc.sflash.present) { ++ err = platform_device_register(&bcma_sflash_dev); ++ if (err) ++ bcma_err(bus, "Error registering serial flash\n"); ++ } ++#endif ++ + /* Try to get SPROM */ + err = bcma_sprom_get(bus); + if (err == -ENOENT) { +--- a/drivers/clocksource/arm_arch_timer.c ++++ b/drivers/clocksource/arm_arch_timer.c +@@ -14,6 +14,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -1048,6 +1049,16 @@ static void __init arch_timer_of_configu + if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) + arch_timer_rate = rate; + ++ /* Get clk rate through clk driver if present */ ++ if (!arch_timer_rate) { ++ struct clk *clk = of_clk_get(np, 0); ++ ++ if (!IS_ERR(clk)) { ++ if (!clk_prepare_enable(clk)) ++ arch_timer_rate = clk_get_rate(clk); ++ } ++ } ++ + /* Check the timer frequency. */ + if (validate_timer_rate()) + pr_warn("frequency not available\n"); diff --git a/target/linux/bcm53xx/patches-6.6/030-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch b/target/linux/bcm53xx/patches-6.6/030-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch deleted file mode 100644 index 707e4a31e9..0000000000 --- a/target/linux/bcm53xx/patches-6.6/030-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 5cbee5828219c4f7b33e96b5d8ce5e467b2857c8 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 1 Sep 2023 12:55:49 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Set MACs for D-Link DIR-885L -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Specify NVRAM access and use its "et2macaddr" NVMEM cell. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230901105549.7076-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - .../dts/broadcom/bcm47094-dlink-dir-885l.dts | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - ---- a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts -+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts -@@ -25,6 +25,15 @@ - <0x88000000 0x08000000>; - }; - -+ nvram@1e3f0000 { -+ compatible = "brcm,nvram"; -+ reg = <0x1e3f0000 0x10000>; -+ -+ et2macaddr: et2macaddr { -+ #nvmem-cell-cells = <1>; -+ }; -+ }; -+ - nand_controller: nand-controller@18028000 { - nand@0 { - partitions { -@@ -112,6 +121,11 @@ - vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; - }; - -+&gmac0 { -+ nvmem-cells = <&et2macaddr 0>; -+ nvmem-cell-names = "mac-address"; -+}; -+ - &spi_nor { - status = "okay"; - }; -@@ -142,6 +156,8 @@ - - port@4 { - label = "wan"; -+ nvmem-cells = <&et2macaddr 3>; -+ nvmem-cell-names = "mac-address"; - }; - - port@5 { diff --git a/target/linux/bcm53xx/patches-6.6/030-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch b/target/linux/bcm53xx/patches-6.6/030-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch deleted file mode 100644 index 8a8066ba63..0000000000 --- a/target/linux/bcm53xx/patches-6.6/030-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch +++ /dev/null @@ -1,44 +0,0 @@ -From a9e79863b62aaaefcdf469fc331bf482ae00db0d Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 1 Sep 2023 14:43:11 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Specify NVRAM access and use its "et1macaddr" NVMEM cell. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20230901124311.31156-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts | 11 +++++++++++ - 1 file changed, 11 insertions(+) - ---- a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts -@@ -25,6 +25,12 @@ - <0x88000000 0x08000000>; - }; - -+ nvram@1c080000 { -+ et1macaddr: et1macaddr { -+ #nvmem-cell-cells = <1>; -+ }; -+ }; -+ - leds { - compatible = "gpio-leds"; - -@@ -62,6 +68,11 @@ - }; - }; - -+&gmac0 { -+ nvmem-cells = <&et1macaddr 0>; -+ nvmem-cell-names = "mac-address"; -+}; -+ - &usb3_phy { - status = "okay"; - }; diff --git a/target/linux/bcm53xx/patches-6.6/030-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch b/target/linux/bcm53xx/patches-6.6/030-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch deleted file mode 100644 index 842f47af42..0000000000 --- a/target/linux/bcm53xx/patches-6.6/030-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 81ea360a16978a4df61df9db56b171909bd659c0 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Sat, 16 Sep 2023 10:30:57 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / - MIT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Move code added by Felix to the bcm-ns.dtsi which uses dual licensing. -That syncs more Northstar code to be based on the same licensing schema. - -This code was added in the commit 1ff80363524c ("ARM: BCM5301X: Add -profiling support"). - -Cc: Felix Fietkau -Signed-off-by: Rafał Miłecki -Acked-by: Felix Fietkau -Link: https://lore.kernel.org/r/20230916083057.10458-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/broadcom/bcm-ns.dtsi | 7 +++++++ - arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 7 ------- - 2 files changed, 7 insertions(+), 7 deletions(-) - ---- a/arch/arm/boot/dts/broadcom/bcm-ns.dtsi -+++ b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi -@@ -14,6 +14,13 @@ - #address-cells = <1>; - #size-cells = <1>; - -+ pmu { -+ compatible = "arm,cortex-a9-pmu"; -+ interrupts = -+ , -+ ; -+ }; -+ - chipcommon-a-bus@18000000 { - compatible = "simple-bus"; - ranges = <0x00000000 0x18000000 0x00001000>; ---- a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi -@@ -26,13 +26,6 @@ - }; - }; - -- pmu { -- compatible = "arm,cortex-a9-pmu"; -- interrupts = -- , -- ; -- }; -- - clocks { - #address-cells = <1>; - #size-cells = <1>; diff --git a/target/linux/bcm53xx/patches-6.6/030-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch b/target/linux/bcm53xx/patches-6.6/030-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch deleted file mode 100644 index 960908100e..0000000000 --- a/target/linux/bcm53xx/patches-6.6/030-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch +++ /dev/null @@ -1,104 +0,0 @@ -From b8d4f7c1be04d66c37c119c501c87bccc4197694 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Sat, 16 Sep 2023 10:58:55 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / - MIT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Move code added by Vivek to the bcm-ns.dtsi which uses dual licensing. -That syncs more Northstar code to be based on the same licensing schema. - -This code was added in the commit 37f6130ec39f ("ARM: dts: BCM5301X: -Make USB 3.0 PHY use MDIO PHY driver"). - -Cc: Vivek Unune -Signed-off-by: Rafał Miłecki -Acked-by: Vivek Unune -Link: https://lore.kernel.org/r/20230916085855.28375-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/broadcom/bcm-ns.dtsi | 27 ++++++++++++++++++++++++ - arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 27 ------------------------ - 2 files changed, 27 insertions(+), 27 deletions(-) - ---- a/arch/arm/boot/dts/broadcom/bcm-ns.dtsi -+++ b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi -@@ -327,6 +327,29 @@ - #address-cells = <1>; - }; - -+ mdio-mux@18003000 { -+ compatible = "mdio-mux-mmioreg", "mdio-mux"; -+ mdio-parent-bus = <&mdio>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x18003000 0x4>; -+ mux-mask = <0x200>; -+ -+ mdio@0 { -+ reg = <0x0>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ usb3_phy: usb3-phy@10 { -+ compatible = "brcm,ns-ax-usb3-phy"; -+ reg = <0x10>; -+ usb3-dmp-syscon = <&usb3_dmp>; -+ #phy-cells = <0>; -+ status = "disabled"; -+ }; -+ }; -+ }; -+ - rng: rng@18004000 { - compatible = "brcm,bcm5301x-rng"; - reg = <0x18004000 0x14>; -@@ -467,6 +490,10 @@ - brcm,nand-has-wp; - }; - -+ usb3_dmp: syscon@18105000 { -+ reg = <0x18105000 0x1000>; -+ }; -+ - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; ---- a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi -@@ -62,33 +62,6 @@ - }; - }; - -- mdio-mux@18003000 { -- compatible = "mdio-mux-mmioreg", "mdio-mux"; -- mdio-parent-bus = <&mdio>; -- #address-cells = <1>; -- #size-cells = <0>; -- reg = <0x18003000 0x4>; -- mux-mask = <0x200>; -- -- mdio@0 { -- reg = <0x0>; -- #address-cells = <1>; -- #size-cells = <0>; -- -- usb3_phy: usb3-phy@10 { -- compatible = "brcm,ns-ax-usb3-phy"; -- reg = <0x10>; -- usb3-dmp-syscon = <&usb3_dmp>; -- #phy-cells = <0>; -- status = "disabled"; -- }; -- }; -- }; -- -- usb3_dmp: syscon@18105000 { -- reg = <0x18105000 0x1000>; -- }; -- - i2c0: i2c@18009000 { - compatible = "brcm,iproc-i2c"; - reg = <0x18009000 0x50>; diff --git a/target/linux/bcm53xx/patches-6.6/030-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch b/target/linux/bcm53xx/patches-6.6/030-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch deleted file mode 100644 index 28f4d2b743..0000000000 --- a/target/linux/bcm53xx/patches-6.6/030-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch +++ /dev/null @@ -1,377 +0,0 @@ -From 473baeab929444295b0530f8766e4becb6a08973 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 13 Oct 2023 12:33:13 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Explicitly disable unused switch CPU - ports -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -When redescribing ports I assumed that missing "label" (like "cpu") -means switch port isn't used. That was incorrect and I realized my -change made Linux always use the first (5) CPU port (there are 3 of -them). - -While above should technically be possible it often isn't correct: -1. Non-default switch ports are often connected to Ethernet interfaces - not fully covered by vendor setup (they may miss MACs) -2. On some devices non-default ports require specifying fixed link - -This fixes network connectivity for some devices. It was reported & -tested for Netgear R8000. It also affects Linksys EA9200 with its -downstream DTS. - -Fixes: ba4aebce23b2 ("ARM: dts: BCM5301X: Describe switch ports in the main DTS") -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20231013103314.10306-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - .../dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts | 8 ++++++++ - .../boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts | 8 ++++++++ - arch/arm/boot/dts/broadcom/bcm953012er.dts | 8 ++++++++ - 20 files changed, 160 insertions(+) - ---- a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi -+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi -@@ -189,5 +189,13 @@ - port@8 { - status = "disabled"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts -@@ -93,5 +93,13 @@ - port@8 { - status = "disabled"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts -@@ -96,5 +96,13 @@ - port@8 { - status = "disabled"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts -@@ -130,5 +130,13 @@ - port@8 { - status = "disabled"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts -@@ -153,6 +153,14 @@ - port@8 { - status = "disabled"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; - ---- a/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts -+++ b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts -@@ -153,5 +153,13 @@ - port@8 { - status = "disabled"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts -+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts -@@ -89,5 +89,13 @@ - port@8 { - status = "disabled"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts -+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts -@@ -156,5 +156,13 @@ - port@8 { - status = "disabled"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts -@@ -235,6 +235,14 @@ - status = "disabled"; - }; - -+ port@5 { -+ status = "disabled"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ - port@8 { - label = "cpu"; - }; ---- a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts -+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts -@@ -168,6 +168,14 @@ - status = "disabled"; - }; - -+ port@5 { -+ status = "disabled"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ - port@8 { - label = "cpu"; - }; ---- a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts -+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts -@@ -200,6 +200,14 @@ - status = "disabled"; - }; - -+ port@5 { -+ status = "disabled"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ - port@8 { - label = "cpu"; - phy-mode = "rgmii"; ---- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts -+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts -@@ -115,5 +115,13 @@ - port@8 { - status = "disabled"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts -+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts -@@ -128,5 +128,13 @@ - port@8 { - status = "disabled"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts -+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts -@@ -115,5 +115,13 @@ - port@8 { - status = "disabled"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts -+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts -@@ -83,5 +83,13 @@ - port@8 { - status = "disabled"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts -+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts -@@ -155,5 +155,13 @@ - port@8 { - status = "disabled"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts -+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts -@@ -166,5 +166,13 @@ - port@8 { - status = "disabled"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts -+++ b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts -@@ -132,6 +132,14 @@ - port@8 { - status = "disabled"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; - ---- a/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts -+++ b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts -@@ -193,6 +193,14 @@ - port@8 { - status = "disabled"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; - ---- a/arch/arm/boot/dts/broadcom/bcm953012er.dts -+++ b/arch/arm/boot/dts/broadcom/bcm953012er.dts -@@ -92,6 +92,14 @@ - port@8 { - status = "disabled"; - }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; - }; - }; - diff --git a/target/linux/bcm53xx/patches-6.6/030-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch b/target/linux/bcm53xx/patches-6.6/030-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch deleted file mode 100644 index 85f093ff0d..0000000000 --- a/target/linux/bcm53xx/patches-6.6/030-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch +++ /dev/null @@ -1,47 +0,0 @@ -From d313b0e9070a7100ca55e64fe3b081d176d8806d Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 13 Oct 2023 12:33:14 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 - CPU ports -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Ports 5 and 7 are disabled by default because the standard use case is -for port 8 to manage all CPU directed traffic. For experimentation -purposes however it is desirable to provide adequate properties such -that people can experiment with using different ports without having to -figure out their configuration. Some of the use cases include but are -not limited to doubling or tripling the bandwidth by leveraging the -additional ports/Ethernet MAC combinations. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20231013103314.10306-2-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts -@@ -237,10 +237,20 @@ - - port@5 { - status = "disabled"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; - }; - - port@7 { - status = "disabled"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; - }; - - port@8 { diff --git a/target/linux/bcm53xx/patches-6.6/030-v6.7-0007-ARM-dts-BCM5301X-Set-switch-ports-for-Linksys-EA9200.patch b/target/linux/bcm53xx/patches-6.6/030-v6.7-0007-ARM-dts-BCM5301X-Set-switch-ports-for-Linksys-EA9200.patch deleted file mode 100644 index 87b6ade5f6..0000000000 --- a/target/linux/bcm53xx/patches-6.6/030-v6.7-0007-ARM-dts-BCM5301X-Set-switch-ports-for-Linksys-EA9200.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 253358f373492608348136e569366d73cb969f6a Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Tue, 24 Oct 2023 09:26:05 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Set switch ports for Linksys EA9200 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This patch was developed as OpenWrt downstream change and was recently -confirmed to work as expected. - -Tested-by: Rani Hod -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20231024072605.32517-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - .../dts/broadcom/bcm4709-linksys-ea9200.dts | 38 +++++++++++++++++++ - 1 file changed, 38 insertions(+) - ---- a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts -@@ -47,3 +47,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ status = "disabled"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ label = "cpu"; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-6.6/040-v6.11-ARM-dts-broadcom-convert-NVMEM-content-to-layout-syntax.patch b/target/linux/bcm53xx/patches-6.6/040-v6.11-ARM-dts-broadcom-convert-NVMEM-content-to-layout-syntax.patch deleted file mode 100644 index 864fd01629..0000000000 --- a/target/linux/bcm53xx/patches-6.6/040-v6.11-ARM-dts-broadcom-convert-NVMEM-content-to-layout-syntax.patch +++ /dev/null @@ -1,64 +0,0 @@ -From ed0d78c75ca93c9f1d7f0d08ac5abe0de71fe312 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Thu, 16 May 2024 10:47:37 +0200 -Subject: [PATCH] ARM: dts: broadcom: convert NVMEM content to layout syntax -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Use cleaner (and non-deprecated) bindings syntax. See commit -bd912c991d2e ("dt-bindings: nvmem: layouts: add fixed-layout") for -details. - -Signed-off-by: Rafał Miłecki -Link: https://lore.kernel.org/r/20240516084737.2789-1-zajec5@gmail.com -Signed-off-by: Florian Fainelli ---- - arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts | 12 ++++++++---- - .../dts/broadcom/bcm958625-meraki-mx6x-common.dtsi | 12 ++++++++---- - 2 files changed, 16 insertions(+), 8 deletions(-) - ---- a/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts -+++ b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts -@@ -223,11 +223,15 @@ - reg = <0x50>; - pagesize = <32>; - read-only; -- #address-cells = <1>; -- #size-cells = <1>; - -- mac_address: mac-address@66 { -- reg = <0x66 0x6>; -+ nvmem-layout { -+ compatible = "fixed-layout"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ mac_address: mac-address@66 { -+ reg = <0x66 0x6>; -+ }; - }; - }; - }; ---- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi -+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi -@@ -55,11 +55,15 @@ - reg = <0x50>; - pagesize = <32>; - read-only; -- #address-cells = <1>; -- #size-cells = <1>; - -- mac_address: mac-address@66 { -- reg = <0x66 0x6>; -+ nvmem-layout { -+ compatible = "fixed-layout"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ mac_address: mac-address@66 { -+ reg = <0x66 0x6>; -+ }; - }; - }; - }; diff --git a/target/linux/bcm53xx/patches-6.6/050-v6.13-ARM-dts-meraki-mr26-set-mac-address-for-gmac0.patch b/target/linux/bcm53xx/patches-6.6/050-v6.13-ARM-dts-meraki-mr26-set-mac-address-for-gmac0.patch deleted file mode 100644 index f6a6f819d1..0000000000 --- a/target/linux/bcm53xx/patches-6.6/050-v6.13-ARM-dts-meraki-mr26-set-mac-address-for-gmac0.patch +++ /dev/null @@ -1,52 +0,0 @@ -From ad1915e2070cf832bfb81dcbeb44b073c09e6dcc Mon Sep 17 00:00:00 2001 -From: Rosen Penev -Date: Sun, 20 Oct 2024 18:51:47 -0700 -Subject: [PATCH] ARM: dts: meraki-mr26: set mac address for gmac0 - -Currently this needs to be done in userspace. - -Signed-off-by: Rosen Penev -Link: https://lore.kernel.org/r/20241021015147.172700-1-rosenp@gmail.com -Signed-off-by: Florian Fainelli ---- - .../dts/broadcom/bcm53015-meraki-mr26.dts | 20 +++++++++++++++++++ - 1 file changed, 20 insertions(+) - ---- a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts -+++ b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts -@@ -59,6 +59,9 @@ - - &gmac0 { - status = "okay"; -+ -+ nvmem-cells = <&macaddr_board_config_66>; -+ nvmem-cell-names = "mac-address"; - }; - - &gmac1 { -@@ -102,8 +105,25 @@ - }; - - partition@800000 { -+ compatible = "linux,ubi"; - label = "ubi"; - reg = <0x800000 0x7780000>; -+ -+ volumes { -+ ubi-volume-board-config { -+ volname = "board-config"; -+ -+ nvmem-layout { -+ compatible = "fixed-layout"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ macaddr_board_config_66: macaddr@66 { -+ reg = <0x66 0x6>; -+ }; -+ }; -+ }; -+ }; - }; - }; - }; diff --git a/target/linux/bcm53xx/patches-6.6/051-ARM-dts-meraki-mr26-wifi-MACs-in-dts.patch b/target/linux/bcm53xx/patches-6.6/051-ARM-dts-meraki-mr26-wifi-MACs-in-dts.patch deleted file mode 100644 index fd31438cdb..0000000000 --- a/target/linux/bcm53xx/patches-6.6/051-ARM-dts-meraki-mr26-wifi-MACs-in-dts.patch +++ /dev/null @@ -1,67 +0,0 @@ -From c18e0b14b466fb0aa17c8ca6e61f16ba1254aebd Mon Sep 17 00:00:00 2001 -From: Rosen Penev -Date: Sun, 24 Nov 2024 12:58:51 -0800 -Subject: [PATCH] ARM: dts: meraki-mr26: wifi MACs in dts - -OPENWRT HACK. Probably will not be accepted upstream. - -Signed-off-by: Rosen Penev ---- - .../dts/broadcom/bcm53015-meraki-mr26.dts | 31 ++++++++++++++++++- - 1 file changed, 30 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts -+++ b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts -@@ -60,7 +60,7 @@ - &gmac0 { - status = "okay"; - -- nvmem-cells = <&macaddr_board_config_66>; -+ nvmem-cells = <&macaddr_board_config_66 0>; - nvmem-cell-names = "mac-address"; - }; - -@@ -74,6 +74,33 @@ - status = "disabled"; - }; - -+&pcie0 { -+ wifi@0,0 { -+ reg = <0x0000 0 0 0 0>; -+ compatible = "brcm,bcm43431"; -+ nvmem-cells = <&macaddr_board_config_66 1>; -+ nvmem-cell-names = "mac-address"; -+ }; -+}; -+ -+&pcie1 { -+ wifi@0,0 { -+ reg = <0x0000 0 0 0 0>; -+ compatible = "brcm,bcm43431"; -+ nvmem-cells = <&macaddr_board_config_66 2>; -+ nvmem-cell-names = "mac-address"; -+ }; -+}; -+ -+&pcie2 { -+ wifi@0,0 { -+ reg = <0x0000 0 0 0 0>; -+ compatible = "brcm,bcm43428"; -+ nvmem-cells = <&macaddr_board_config_66 3>; -+ nvmem-cell-names = "mac-address"; -+ }; -+}; -+ - &nandcs { - partitions { - compatible = "fixed-partitions"; -@@ -119,7 +146,9 @@ - #size-cells = <1>; - - macaddr_board_config_66: macaddr@66 { -+ compatible = "mac-base"; - reg = <0x66 0x6>; -+ #nvmem-cell-cells = <1>; - }; - }; - }; diff --git a/target/linux/bcm53xx/patches-6.6/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch b/target/linux/bcm53xx/patches-6.6/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch deleted file mode 100644 index dbf4569b4e..0000000000 --- a/target/linux/bcm53xx/patches-6.6/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch +++ /dev/null @@ -1,43 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Tue, 13 Apr 2021 18:25:20 +0200 -Subject: [PATCH] mtd: parsers: trx: parse "firmware" MTD partitions only -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Parsing every partition with "compatible" set to "brcm,trx" results in -parsing both: firmware partition and failsafe partition on devices that -implement failsafe booting. This affects e.g. Linksys EA9500 which has: - -partition@200000 { - reg = <0x0200000 0x01d00000>; - compatible = "linksys,ns-firmware", "brcm,trx"; -}; - -partition@1f00000 { - reg = <0x01f00000 0x01d00000>; - compatible = "linksys,ns-firmware", "brcm,trx"; -}; - -Check for MTD partition name "firmware" before parsing. Recently added -ofpart_linksys_ns.c creates "firmware" and "failsafe" depending on -bootloader setup. - -Signed-off-by: Rafał Miłecki ---- - drivers/mtd/parsers/parser_trx.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/mtd/parsers/parser_trx.c -+++ b/drivers/mtd/parsers/parser_trx.c -@@ -92,6 +92,10 @@ static int parser_trx_parse(struct mtd_i - if (err != 0 && err != -EINVAL) - pr_err("failed to parse \"brcm,trx-magic\" DT attribute, using default: %d\n", err); - -+ /* Don't parse any failsafe / backup partitions */ -+ if (strcmp(mtd->name, "firmware")) -+ return -ENOENT; -+ - parts = kcalloc(TRX_PARSER_MAX_PARTS, sizeof(struct mtd_partition), - GFP_KERNEL); - if (!parts) diff --git a/target/linux/bcm53xx/patches-6.6/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-6.6/180-usb-xhci-add-support-for-performing-fake-doorbell.patch deleted file mode 100644 index 9484546935..0000000000 --- a/target/linux/bcm53xx/patches-6.6/180-usb-xhci-add-support-for-performing-fake-doorbell.patch +++ /dev/null @@ -1,113 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Sat, 1 Oct 2016 22:54:48 +0200 -Subject: [PATCH] usb: xhci: add support for performing fake doorbell - -Broadcom's Northstar XHCI controllers seem to need a special start -procedure to work correctly. There isn't any official documentation of -this, the problem is that controller doesn't detect any connected -devices with default setup. Moreover connecting USB device to controller -that doesn't run properly can cause SoC's watchdog issues. - -A workaround that was successfully tested on multiple devices is to -perform a fake doorbell. This patch adds code for doing this and enables -it on BCM4708 family. ---- - drivers/usb/host/xhci-plat.c | 6 +++++ - drivers/usb/host/xhci.c | 63 +++++++++++++++++++++++++++++++++++++++++--- - drivers/usb/host/xhci.h | 1 + - 3 files changed, 67 insertions(+), 3 deletions(-) - ---- a/drivers/usb/host/xhci-plat.c -+++ b/drivers/usb/host/xhci-plat.c -@@ -77,8 +77,13 @@ static int xhci_priv_resume_quirk(struct - static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) - { - struct xhci_plat_priv *priv = xhci_to_priv(xhci); -+ struct platform_device *pdev = to_platform_device(dev); -+ struct device_node *node = pdev->dev.of_node; - - xhci->quirks |= priv->quirks; -+ -+ if (node && of_machine_is_compatible("brcm,bcm4708")) -+ xhci->quirks |= XHCI_FAKE_DOORBELL; - } - - /* called during probe() after chip reset completes */ ---- a/drivers/usb/host/xhci.c -+++ b/drivers/usb/host/xhci.c -@@ -163,6 +163,49 @@ int xhci_start(struct xhci_hcd *xhci) - return ret; - } - -+/** -+ * xhci_fake_doorbell - Perform a fake doorbell on a specified slot -+ * -+ * Some controllers require a fake doorbell to start correctly. Without that -+ * they simply don't detect any devices. -+ */ -+static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id) -+{ -+ u32 temp; -+ -+ /* Alloc a virt device for that slot */ -+ if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) { -+ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n"); -+ return -ENOMEM; -+ } -+ -+ /* Ring fake doorbell for slot_id ep 0 */ -+ xhci_ring_ep_doorbell(xhci, slot_id, 0, 0); -+ usleep_range(1000, 1500); -+ -+ /* Read the status to check if HSE is set or not */ -+ temp = readl(&xhci->op_regs->status); -+ -+ /* Clear HSE if set */ -+ if (temp & STS_FATAL) { -+ xhci_dbg(xhci, "HSE problem detected, status: 0x%08x\n", temp); -+ temp &= ~0x1fff; -+ temp |= STS_FATAL; -+ writel(temp, &xhci->op_regs->status); -+ usleep_range(1000, 1500); -+ readl(&xhci->op_regs->status); -+ } -+ -+ /* Free virt device */ -+ xhci_free_virt_device(xhci, xhci->devs[slot_id], slot_id); -+ -+ /* We're done if controller is already running */ -+ if (readl(&xhci->op_regs->command) & CMD_RUN) -+ return 0; -+ -+ return xhci_start(xhci); -+} -+ - /* - * Reset a halted HC. - * -@@ -500,6 +543,15 @@ static int xhci_run_finished(struct xhci - return -ENODEV; - } - -+ if (xhci->quirks & XHCI_FAKE_DOORBELL) { -+ int err = xhci_fake_doorbell(xhci, 1); -+ if (err) { -+ xhci_halt(xhci); -+ spin_unlock_irqrestore(&xhci->lock, flags); -+ return err; -+ } -+ } -+ - xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; - - if (xhci->quirks & XHCI_NEC_HOST) ---- a/drivers/usb/host/xhci.h -+++ b/drivers/usb/host/xhci.h -@@ -1660,6 +1660,7 @@ struct xhci_hcd { - #define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48) - #define XHCI_ETRON_HOST BIT_ULL(49) - #define XHCI_LIMIT_ENDPOINT_INTERVAL_9 BIT_ULL(50) -+#define XHCI_FAKE_DOORBELL BIT_ULL(51) - - unsigned int num_active_eps; - unsigned int limit_active_eps; diff --git a/target/linux/bcm53xx/patches-6.6/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch b/target/linux/bcm53xx/patches-6.6/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch deleted file mode 100644 index 789326310a..0000000000 --- a/target/linux/bcm53xx/patches-6.6/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch +++ /dev/null @@ -1,111 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Wed, 24 Sep 2014 22:14:07 +0200 -Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Broadcom devices have broken CFE (bootloader) that leaves hardware in an -invalid state. It causes problems with booting Linux. On Northstar -devices kernel was randomly hanging in ~25% of tries during early init. -Hangs used to happen at random places in the start_kernel. On BCM53573 -kernel doesn't even seem to start booting. - -To workaround this problem we need to do following very early: -1) Clear 2 following bits in the SCTLR register: -#define CR_M (1 << 0) /* MMU enable */ -#define CR_C (1 << 2) /* Dcache enable */ -2) Flush the whole D-cache -3) Disable L2 cache - -Unfortunately this patch is not upstreamable as it does above things -unconditionally. We can't check if we are running on Broadcom platform -in any safe way and doing such hacks with ARCH_MULTI_V7 is unacceptable -as it could break other devices support. - -Signed-off-by: Rafał Miłecki ---- - ---- a/arch/arm/boot/compressed/Makefile -+++ b/arch/arm/boot/compressed/Makefile -@@ -36,6 +36,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y) - OBJS += ll_char_wr.o font.o - endif - -+ifeq ($(CONFIG_ARCH_BCM_5301X),y) -+OBJS += head-bcm_5301x-mpcore.o -+OBJS += cache-v7-min.o -+endif -+ - ifeq ($(CONFIG_ARCH_SA1100),y) - OBJS += head-sa1100.o - endif ---- /dev/null -+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S -@@ -0,0 +1,37 @@ -+/* -+ * -+ * Platform specific tweaks. This is merged into head.S by the linker. -+ * -+ */ -+ -+#include -+#include -+#include -+ -+ .section ".start", "ax" -+ -+/* -+ * This code section is spliced into the head code by the linker -+ */ -+ -+__plat_uncompress_start: -+ -+ @ Preserve r8/r7 i.e. kernel entry values -+ mov r12, r8 -+ -+ @ Clear MMU enable and Dcache enable bits -+ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR -+ bic r0, #CR_C|CR_M -+ mcr p15, 0, r0, c1, c0, 0 @ Write SCTLR -+ nop -+ -+ @ Call the cache invalidation routine -+ bl v7_flush_dcache_all -+ nop -+ mov r0,#0 -+ ldr r3, =0x19022000 @ L2 cache controller, control reg -+ str r0, [r3, #0x100] @ Disable L2 cache -+ nop -+ -+ @ Restore -+ mov r8, r12 ---- a/arch/arm/boot/compressed/cache-v7-min.S -+++ b/arch/arm/boot/compressed/cache-v7-min.S -@@ -12,6 +12,7 @@ - - #include - #include -+#include - - __INIT - -@@ -63,7 +64,7 @@ loop2: - ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11 - THUMB( lsl r6, r9, r2 ) - THUMB( orr r11, r11, r6 ) @ factor index number into r11 -- mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way -+ mcr p15, 0, r11, c7, c6, 2 @ clean & invalidate by set/way - subs r9, r9, #1 @ decrement the index - bge loop2 - subs r4, r4, #1 @ decrement the way ---- a/arch/arm/boot/compressed/vmlinux.lds.S -+++ b/arch/arm/boot/compressed/vmlinux.lds.S -@@ -41,6 +41,7 @@ SECTIONS - *(.start) - *(.text) - *(.text.*) -+ *(.init.text) - ARM_STUBS_TEXT - } - .table : ALIGN(4) { diff --git a/target/linux/bcm53xx/patches-6.6/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch b/target/linux/bcm53xx/patches-6.6/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch deleted file mode 100644 index 9cfc3aac15..0000000000 --- a/target/linux/bcm53xx/patches-6.6/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch +++ /dev/null @@ -1,675 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Subject: [PATCH] ARM: dts: BCM5301X: Specify switch ports for remaining - devices -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki ---- - ---- a/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts -@@ -92,3 +92,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts -@@ -83,3 +83,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "wan"; -+ }; -+ -+ port@1 { -+ label = "lan1"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan3"; -+ }; -+ -+ port@4 { -+ label = "lan4"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts -@@ -149,3 +149,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts -@@ -46,3 +46,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts -@@ -43,3 +43,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts -@@ -86,3 +86,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts -+++ b/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts -@@ -77,3 +77,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "wan"; -+ }; -+ -+ port@1 { -+ label = "lan1"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan3"; -+ }; -+ -+ port@4 { -+ label = "lan4"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts -@@ -77,6 +77,40 @@ - status = "okay"; - }; - -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "wan"; -+ }; -+ -+ port@1 { -+ label = "lan1"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan3"; -+ }; -+ -+ port@5 { -+ status = "disabled"; -+ }; -+ -+ port@7 { -+ label = "cpu"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; -+ - &nandcs { - partitions { - compatible = "fixed-partitions"; ---- a/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts -@@ -130,3 +130,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts -@@ -104,3 +104,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "wan"; -+ }; -+ -+ port@1 { -+ label = "lan1"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan3"; -+ }; -+ -+ port@4 { -+ label = "lan4"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/broadcom/bcm47094-netgear-r8500.dts -+++ b/arch/arm/boot/dts/broadcom/bcm47094-netgear-r8500.dts -@@ -94,3 +94,41 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "wan"; -+ }; -+ -+ port@1 { -+ label = "lan1"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan3"; -+ }; -+ -+ port@4 { -+ label = "lan4"; -+ }; -+ -+ port@5 { -+ status = "disabled"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ label = "cpu"; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts -+++ b/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts -@@ -38,6 +38,40 @@ - status = "okay"; - }; - -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; -+ - &nandcs { - partitions { - compatible = "fixed-partitions"; ---- a/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts -+++ b/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts -@@ -91,6 +91,44 @@ - }; - }; - -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "wan"; -+ }; -+ -+ port@1 { -+ label = "lan1"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan3"; -+ }; -+ -+ port@4 { -+ label = "lan4"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; -+ - &spi_nor { - status = "okay"; - ---- a/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts -+++ b/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts -@@ -100,6 +100,44 @@ - vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>; - }; - -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "wan"; -+ }; -+ -+ port@1 { -+ label = "lan1"; -+ }; -+ -+ port@2 { -+ label = "lan2"; -+ }; -+ -+ port@3 { -+ label = "lan3"; -+ }; -+ -+ port@4 { -+ label = "lan4"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; -+ - &spi_nor { - status = "okay"; - ---- a/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts -+++ b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts -@@ -107,3 +107,42 @@ - &usb3_phy { - status = "okay"; - }; -+ -+&srab { -+ status = "okay"; -+ -+ ports { -+ port@0 { -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ label = "wan"; -+ }; -+ -+ port@5 { -+ label = "cpu"; -+ }; -+ -+ port@7 { -+ status = "disabled"; -+ }; -+ -+ port@8 { -+ status = "disabled"; -+ }; -+ }; -+}; -+ diff --git a/target/linux/bcm53xx/patches-6.6/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-6.6/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch deleted file mode 100644 index 053e5347d1..0000000000 --- a/target/linux/bcm53xx/patches-6.6/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch +++ /dev/null @@ -1,64 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki ---- - ---- a/arch/arm/boot/dts/broadcom/Makefile -+++ b/arch/arm/boot/dts/broadcom/Makefile -@@ -68,6 +68,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4709-buffalo-wxr-1900dhp.dtb \ - bcm4709-linksys-ea9200.dtb \ - bcm4709-netgear-r7000.dtb \ -+ bcm4709-netgear-r7900.dtb \ - bcm4709-netgear-r8000.dtb \ - bcm4709-tplink-archer-c9-v1.dtb \ - bcm47094-asus-rt-ac3100.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7900.dts -@@ -0,0 +1,42 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for Netgear R7900 -+ * -+ * Copyright (C) 2016 Rafał Miłecki -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4709.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" -+ -+/ { -+ compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708"; -+ model = "Netgear R7900"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x08000000>; -+ }; -+ -+ axi@18000000 { -+ usb3@23000 { -+ reg = <0x00023000 0x1000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; diff --git a/target/linux/bcm53xx/patches-6.6/332-Meraki-MX6X-partition-fixups.patch b/target/linux/bcm53xx/patches-6.6/332-Meraki-MX6X-partition-fixups.patch deleted file mode 100644 index 9743c99f28..0000000000 --- a/target/linux/bcm53xx/patches-6.6/332-Meraki-MX6X-partition-fixups.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 35bba88e75311242841dde83073c211310ec0259 Mon Sep 17 00:00:00 2001 -From: Matthew Hagan -Date: Wed, 4 May 2022 08:07:06 +0100 -Subject: [PATCH] bcm53xx: partition fixups for Meraki MX64/MX65 - -We need to enlarge the u-boot partition to add extra features like UBI -booting. The shmoo and newly created env partitions can easily be moved -to the nvram partition. This fixup allows u-boot to be enlarged to up to -1MiB. - -Signed-off-by: Matthew Hagan ---- - arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi | 20 ++++++++++++-------- - 1 file changed, 12 insertions(+), 8 deletions(-) - ---- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi -+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi -@@ -84,13 +84,7 @@ - - partition@0 { - label = "u-boot"; -- reg = <0x0 0x80000>; -- read-only; -- }; -- -- partition@80000 { -- label = "shmoo"; -- reg = <0x80000 0x80000>; -+ reg = <0x0 0x100000>; - read-only; - }; - -@@ -101,7 +95,18 @@ - - partition@400000 { - label = "nvram"; -- reg = <0x400000 0x100000>; -+ reg = <0x400000 0x40000>; -+ }; -+ -+ partition@440000 { -+ label = "u-boot-env"; -+ reg = <0x440000 0x40000>; -+ }; -+ -+ partition@480000 { -+ label = "shmoo"; -+ reg = <0x480000 0x80000>; -+ read-only; - }; - - partition@500000 { diff --git a/target/linux/bcm53xx/patches-6.6/333-bcm53xx-dts-meraki-mx6x-add-OpenWrt-specific-LED-ali.patch b/target/linux/bcm53xx/patches-6.6/333-bcm53xx-dts-meraki-mx6x-add-OpenWrt-specific-LED-ali.patch deleted file mode 100644 index 950e85be9c..0000000000 --- a/target/linux/bcm53xx/patches-6.6/333-bcm53xx-dts-meraki-mx6x-add-OpenWrt-specific-LED-ali.patch +++ /dev/null @@ -1,83 +0,0 @@ -From 9f4e68261b89df87457f46999c471d11754b5de2 Mon Sep 17 00:00:00 2001 -From: Lech Perczak -Date: Sun, 6 Oct 2024 15:57:44 +0200 -Subject: [PATCH] bcm53xx: dts: meraki-mx6x: add OpenWrt-specific LED aliases - -Assign green power LED for "boot", "running", orange for "upgrade" and -red for "failsafe" functions - the same as done for MR33 and MR74. - -Signed-off-by: Lech Perczak ---- - arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi | 9 ++++++++- - arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi | 8 +++++++- - .../boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi | 4 ++-- - 3 files changed, 17 insertions(+), 4 deletions(-) - ---- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi -+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi -@@ -8,6 +8,13 @@ - #include "bcm958625-meraki-mx6x-common.dtsi" - - / { -+ aliases { -+ led-boot = &led_power; -+ led-running = &led_power; -+ led-upgrade = &led_fault; -+ led-failsafe = &led_failsafe; -+ }; -+ - keys { - compatible = "gpio-keys-polled"; - autorepeat; -@@ -55,7 +62,7 @@ - gpios = <&gpioa 26 GPIO_ACTIVE_LOW>; - }; - -- led-4 { -+ led_fault: led-4 { - /* amber:power */ - function = LED_FUNCTION_FAULT; - color = ; ---- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi -+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi -@@ -8,6 +8,12 @@ - #include "bcm958625-meraki-mx6x-common.dtsi" - - / { -+ aliases { -+ led-boot = &led_power; -+ led-running = &led_power; -+ led-upgrade = &led_fault; -+ led-failsafe = &led_failsafe; -+ }; - - keys { - compatible = "gpio-keys-polled"; -@@ -104,7 +110,7 @@ - gpios = <&gpioa 29 GPIO_ACTIVE_LOW>; - }; - -- led-a { -+ led_fault: led-a { - /* amber:power */ - function = LED_FUNCTION_FAULT; - color = ; ---- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi -+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi -@@ -14,14 +14,14 @@ - pwm-leds { - compatible = "pwm-leds"; - -- led-1 { -+ led_failsafe: led-1 { - function = LED_FUNCTION_INDICATOR; - color = ; - pwms = <&pwm 1 50000>; - max-brightness = <255>; - }; - -- led-2 { -+ led_power: led-2 { - function = LED_FUNCTION_POWER; - color = ; - pwms = <&pwm 2 50000>; diff --git a/target/linux/bcm53xx/patches-6.6/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch b/target/linux/bcm53xx/patches-6.6/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch deleted file mode 100644 index e6140d9a70..0000000000 --- a/target/linux/bcm53xx/patches-6.6/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Thu, 16 Oct 2014 20:52:16 +0200 -Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki ---- - drivers/mtd/ubi/attach.c | 5 +++++ - drivers/mtd/ubi/io.c | 4 ++++ - drivers/mtd/ubi/ubi.h | 1 + - 3 files changed, 10 insertions(+) - ---- a/drivers/mtd/ubi/attach.c -+++ b/drivers/mtd/ubi/attach.c -@@ -82,6 +82,9 @@ static int self_check_ai(struct ubi_devi - #define AV_ADD BIT(1) - #define AV_FIND_OR_ADD (AV_FIND | AV_ADD) - -+/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */ -+bool erase_all_next; -+ - /** - * find_or_add_av - internal function to find a volume, add a volume or do - * both (find and add if missing). -@@ -1580,6 +1583,8 @@ int ubi_attach(struct ubi_device *ubi, i - if (!ai) - return -ENOMEM; - -+ erase_all_next = false; -+ - #ifdef CONFIG_MTD_UBI_FASTMAP - /* On small flash devices we disable fastmap in any case. */ - if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) { ---- a/drivers/mtd/ubi/io.c -+++ b/drivers/mtd/ubi/io.c -@@ -717,6 +717,10 @@ int ubi_io_read_ec_hdr(struct ubi_device - } - - magic = be32_to_cpu(ec_hdr->magic); -+ if (magic == 0xdeadc0de) -+ erase_all_next = true; -+ if (erase_all_next) -+ return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF; - if (magic != UBI_EC_HDR_MAGIC) { - if (mtd_is_eccerr(read_err)) - return UBI_IO_BAD_HDR_EBADMSG; ---- a/drivers/mtd/ubi/ubi.h -+++ b/drivers/mtd/ubi/ubi.h -@@ -822,6 +822,7 @@ extern struct mutex ubi_devices_mutex; - extern struct blocking_notifier_head ubi_notifiers; - - /* attach.c */ -+extern bool erase_all_next; - struct ubi_ainf_peb *ubi_alloc_aeb(struct ubi_attach_info *ai, int pnum, - int ec); - void ubi_free_aeb(struct ubi_attach_info *ai, struct ubi_ainf_peb *aeb); diff --git a/target/linux/bcm53xx/patches-6.6/600-net-disable-GRO-by-default.patch b/target/linux/bcm53xx/patches-6.6/600-net-disable-GRO-by-default.patch deleted file mode 100644 index fd41824383..0000000000 --- a/target/linux/bcm53xx/patches-6.6/600-net-disable-GRO-by-default.patch +++ /dev/null @@ -1,36 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Mon, 20 Jun 2022 10:01:18 +0200 -Subject: [PATCH] net: disable GRO by default -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -In many cases GRO improves network performance however it comes at a -cost of chacksums calculations. In case of slow CPU and missing hardware -csum calculation support GRO can actually decrease network speed. - -On BCM4708 *disabling* GRO results in following NAT masquarade speed -changes: -1. 364 Mb/s → 396 Mb/s (packet steering disabled) -2. 341 Mb/s → 566 Mb/s (packet steering enabled) - -Signed-off-by: Rafał Miłecki ---- - include/linux/netdev_features.h | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/include/linux/netdev_features.h -+++ b/include/linux/netdev_features.h -@@ -243,10 +243,10 @@ static inline int find_next_netdev_featu - #define NETIF_F_UPPER_DISABLES NETIF_F_LRO - - /* changeable features with no special hardware requirements */ --#define NETIF_F_SOFT_FEATURES (NETIF_F_GSO | NETIF_F_GRO | NETIF_F_GRO_FRAGLIST) -+#define NETIF_F_SOFT_FEATURES (NETIF_F_GSO) - - /* Changeable features with no special hardware requirements that defaults to off. */ --#define NETIF_F_SOFT_FEATURES_OFF (NETIF_F_GRO_UDP_FWD) -+#define NETIF_F_SOFT_FEATURES_OFF (NETIF_F_GRO_UDP_FWD | NETIF_F_GRO | NETIF_F_GRO_FRAGLIST) - - #define NETIF_F_VLAN_FEATURES (NETIF_F_HW_VLAN_CTAG_FILTER | \ - NETIF_F_HW_VLAN_CTAG_RX | \ diff --git a/target/linux/bcm53xx/patches-6.6/905-BCM53573-minor-hacks.patch b/target/linux/bcm53xx/patches-6.6/905-BCM53573-minor-hacks.patch deleted file mode 100644 index 44573cb46a..0000000000 --- a/target/linux/bcm53xx/patches-6.6/905-BCM53573-minor-hacks.patch +++ /dev/null @@ -1,80 +0,0 @@ -From 6f1c62440eb6846cb8045d7a5480ec7bbe47c96f Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Mon, 15 Aug 2016 10:30:41 +0200 -Subject: [PATCH] BCM53573 minor hacks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki ---- - ---- a/arch/arm/boot/dts/broadcom/bcm53573.dtsi -+++ b/arch/arm/boot/dts/broadcom/bcm53573.dtsi -@@ -54,6 +54,7 @@ - , - , - ; -+ clocks = <&ilp>; - }; - - clocks { ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -331,14 +331,6 @@ static int bcma_register_devices(struct - } - #endif - --#ifdef CONFIG_BCMA_SFLASH -- if (bus->drv_cc.sflash.present) { -- err = platform_device_register(&bcma_sflash_dev); -- if (err) -- bcma_err(bus, "Error registering serial flash\n"); -- } --#endif -- - #ifdef CONFIG_BCMA_NFLASH - if (bus->drv_cc.nflash.present) { - err = platform_device_register(&bcma_nflash_dev); -@@ -418,6 +410,14 @@ int bcma_bus_register(struct bcma_bus *b - bcma_register_core(bus, core); - } - -+#ifdef CONFIG_BCMA_SFLASH -+ if (bus->drv_cc.sflash.present) { -+ err = platform_device_register(&bcma_sflash_dev); -+ if (err) -+ bcma_err(bus, "Error registering serial flash\n"); -+ } -+#endif -+ - /* Try to get SPROM */ - err = bcma_sprom_get(bus); - if (err == -ENOENT) { ---- a/drivers/clocksource/arm_arch_timer.c -+++ b/drivers/clocksource/arm_arch_timer.c -@@ -14,6 +14,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -1048,6 +1049,16 @@ static void __init arch_timer_of_configu - if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) - arch_timer_rate = rate; - -+ /* Get clk rate through clk driver if present */ -+ if (!arch_timer_rate) { -+ struct clk *clk = of_clk_get(np, 0); -+ -+ if (!IS_ERR(clk)) { -+ if (!clk_prepare_enable(clk)) -+ arch_timer_rate = clk_get_rate(clk); -+ } -+ } -+ - /* Check the timer frequency. */ - if (validate_timer_rate()) - pr_warn("frequency not available\n");