From: Rafał Miłecki Date: Wed, 22 Mar 2017 20:09:00 +0000 (+0100) Subject: brcm2708: rename all patches from raspberrypi git tree to use 950 prefix X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=fce21ae4ccfcee0c28fb18f5507e145fb0b02dec;p=openwrt%2Fstaging%2Fblogic.git brcm2708: rename all patches from raspberrypi git tree to use 950 prefix Right now all brcm2708 patches are extracted from the non-mainline raspberrypi/linux git tree. Many of them are hacks and/or are unneeded in LEDE. Raspberry Pi is getting better and better mainline support so it would be nice to finally start maintaining patches in a cleaner way: 1) Backport patches accepted in upstream tree 2) Start using upstream drivers 3) Pick only these patches that are needed for more complete support Handling above tasks requires grouping patches - ideally using the same prefixes as generic ones. It means we should rename existing patches to use some high prefix. This will allow e.g. use 0xx for backported code. Signed-off-by: Rafał Miłecki Acked-by: Florian Fainelli Acked-by: Stijn Tintel --- diff --git a/target/linux/brcm2708/patches-4.9/0001-smsx95xx-fix-crimes-against-truesize.patch b/target/linux/brcm2708/patches-4.9/0001-smsx95xx-fix-crimes-against-truesize.patch deleted file mode 100644 index a5737e3c8356..000000000000 --- a/target/linux/brcm2708/patches-4.9/0001-smsx95xx-fix-crimes-against-truesize.patch +++ /dev/null @@ -1,47 +0,0 @@ -From c01a3230d8cdd396dcec2619646f6cf2753481d8 Mon Sep 17 00:00:00 2001 -From: Steve Glendinning -Date: Thu, 19 Feb 2015 18:47:12 +0000 -Subject: [PATCH] smsx95xx: fix crimes against truesize - -smsc95xx is adjusting truesize when it shouldn't, and following a recent patch from Eric this is now triggering warnings. - -This patch stops smsc95xx from changing truesize. - -Signed-off-by: Steve Glendinning ---- - drivers/net/usb/smsc95xx.c | 10 ++++++++-- - 1 file changed, 8 insertions(+), 2 deletions(-) - ---- a/drivers/net/usb/smsc95xx.c -+++ b/drivers/net/usb/smsc95xx.c -@@ -82,6 +82,10 @@ static bool turbo_mode = true; - module_param(turbo_mode, bool, 0644); - MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction"); - -+static bool truesize_mode = false; -+module_param(truesize_mode, bool, 0644); -+MODULE_PARM_DESC(truesize_mode, "Report larger truesize value"); -+ - static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index, - u32 *data, int in_pm) - { -@@ -1951,7 +1955,8 @@ static int smsc95xx_rx_fixup(struct usbn - if (dev->net->features & NETIF_F_RXCSUM) - smsc95xx_rx_csum_offload(skb); - skb_trim(skb, skb->len - 4); /* remove fcs */ -- skb->truesize = size + sizeof(struct sk_buff); -+ if (truesize_mode) -+ skb->truesize = size + sizeof(struct sk_buff); - - return 1; - } -@@ -1969,7 +1974,8 @@ static int smsc95xx_rx_fixup(struct usbn - if (dev->net->features & NETIF_F_RXCSUM) - smsc95xx_rx_csum_offload(ax_skb); - skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */ -- ax_skb->truesize = size + sizeof(struct sk_buff); -+ if (truesize_mode) -+ ax_skb->truesize = size + sizeof(struct sk_buff); - - usbnet_skb_return(dev, ax_skb); - } diff --git a/target/linux/brcm2708/patches-4.9/0002-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch b/target/linux/brcm2708/patches-4.9/0002-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch deleted file mode 100644 index fc7ac4d8b9b9..000000000000 --- a/target/linux/brcm2708/patches-4.9/0002-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 8272cd893c3bca2f047dcf06ae11d9ada6d26f33 Mon Sep 17 00:00:00 2001 -From: Sam Nazarko -Date: Fri, 1 Apr 2016 17:27:21 +0100 -Subject: [PATCH] smsc95xx: Experimental: Enable turbo_mode and packetsize=2560 - by default - -See: http://forum.kodi.tv/showthread.php?tid=285288 ---- - drivers/net/usb/smsc95xx.c | 14 +++++++++----- - 1 file changed, 9 insertions(+), 5 deletions(-) - ---- a/drivers/net/usb/smsc95xx.c -+++ b/drivers/net/usb/smsc95xx.c -@@ -86,6 +86,10 @@ static bool truesize_mode = false; - module_param(truesize_mode, bool, 0644); - MODULE_PARM_DESC(truesize_mode, "Report larger truesize value"); - -+static int packetsize = 2560; -+module_param(packetsize, int, 0644); -+MODULE_PARM_DESC(packetsize, "Override the RX URB packet size"); -+ - static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index, - u32 *data, int in_pm) - { -@@ -1106,13 +1110,13 @@ static int smsc95xx_reset(struct usbnet - - if (!turbo_mode) { - burst_cap = 0; -- dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE; -+ dev->rx_urb_size = packetsize ? packetsize : MAX_SINGLE_PACKET_SIZE; - } else if (dev->udev->speed == USB_SPEED_HIGH) { -- burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE; -- dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE; -+ dev->rx_urb_size = packetsize ? packetsize : DEFAULT_HS_BURST_CAP_SIZE; -+ burst_cap = dev->rx_urb_size / HS_USB_PKT_SIZE; - } else { -- burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE; -- dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE; -+ dev->rx_urb_size = packetsize ? packetsize : DEFAULT_FS_BURST_CAP_SIZE; -+ burst_cap = dev->rx_urb_size / FS_USB_PKT_SIZE; - } - - netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld\n", diff --git a/target/linux/brcm2708/patches-4.9/0003-Allow-mac-address-to-be-set-in-smsc95xx.patch b/target/linux/brcm2708/patches-4.9/0003-Allow-mac-address-to-be-set-in-smsc95xx.patch deleted file mode 100644 index 8075dff2f343..000000000000 --- a/target/linux/brcm2708/patches-4.9/0003-Allow-mac-address-to-be-set-in-smsc95xx.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 2e70eba32ed21b1a909b9ae6a06b3384a33fc5a4 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Tue, 26 Mar 2013 17:26:38 +0000 -Subject: [PATCH] Allow mac address to be set in smsc95xx - -Signed-off-by: popcornmix ---- - drivers/net/usb/smsc95xx.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 56 insertions(+) - ---- a/drivers/net/usb/smsc95xx.c -+++ b/drivers/net/usb/smsc95xx.c -@@ -60,6 +60,7 @@ - #define SUSPEND_SUSPEND3 (0x08) - #define SUSPEND_ALLMODES (SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \ - SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3) -+#define MAC_ADDR_LEN (6) - - #define CARRIER_CHECK_DELAY (2 * HZ) - -@@ -90,6 +91,10 @@ static int packetsize = 2560; - module_param(packetsize, int, 0644); - MODULE_PARM_DESC(packetsize, "Override the RX URB packet size"); - -+static char *macaddr = ":"; -+module_param(macaddr, charp, 0); -+MODULE_PARM_DESC(macaddr, "MAC address"); -+ - static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index, - u32 *data, int in_pm) - { -@@ -918,6 +923,53 @@ static int smsc95xx_ioctl(struct net_dev - return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); - } - -+/* Check the macaddr module parameter for a MAC address */ -+static int smsc95xx_is_macaddr_param(struct usbnet *dev, u8 *dev_mac) -+{ -+ int i, j, got_num, num; -+ u8 mtbl[MAC_ADDR_LEN]; -+ -+ if (macaddr[0] == ':') -+ return 0; -+ -+ i = 0; -+ j = 0; -+ num = 0; -+ got_num = 0; -+ while (j < MAC_ADDR_LEN) { -+ if (macaddr[i] && macaddr[i] != ':') { -+ got_num++; -+ if ('0' <= macaddr[i] && macaddr[i] <= '9') -+ num = num * 16 + macaddr[i] - '0'; -+ else if ('A' <= macaddr[i] && macaddr[i] <= 'F') -+ num = num * 16 + 10 + macaddr[i] - 'A'; -+ else if ('a' <= macaddr[i] && macaddr[i] <= 'f') -+ num = num * 16 + 10 + macaddr[i] - 'a'; -+ else -+ break; -+ i++; -+ } else if (got_num == 2) { -+ mtbl[j++] = (u8) num; -+ num = 0; -+ got_num = 0; -+ i++; -+ } else { -+ break; -+ } -+ } -+ -+ if (j == MAC_ADDR_LEN) { -+ netif_dbg(dev, ifup, dev->net, "Overriding MAC address with: " -+ "%02x:%02x:%02x:%02x:%02x:%02x\n", mtbl[0], mtbl[1], mtbl[2], -+ mtbl[3], mtbl[4], mtbl[5]); -+ for (i = 0; i < MAC_ADDR_LEN; i++) -+ dev_mac[i] = mtbl[i]; -+ return 1; -+ } else { -+ return 0; -+ } -+} -+ - static void smsc95xx_init_mac_address(struct usbnet *dev) - { - const u8 *mac_addr; -@@ -939,6 +991,10 @@ static void smsc95xx_init_mac_address(st - } - } - -+ /* Check module parameters */ -+ if (smsc95xx_is_macaddr_param(dev, dev->net->dev_addr)) -+ return; -+ - /* no useful static MAC address found. generate a random one */ - eth_hw_addr_random(dev->net); - netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n"); diff --git a/target/linux/brcm2708/patches-4.9/0004-Protect-__release_resource-against-resources-without.patch b/target/linux/brcm2708/patches-4.9/0004-Protect-__release_resource-against-resources-without.patch deleted file mode 100644 index 4b80ab0bec14..000000000000 --- a/target/linux/brcm2708/patches-4.9/0004-Protect-__release_resource-against-resources-without.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 3115fe312a2c751954f1ab0f0ba07aea1c1c7d1b Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 13 Mar 2015 12:43:36 +0000 -Subject: [PATCH] Protect __release_resource against resources without parents - -Without this patch, removing a device tree overlay can crash here. - -Signed-off-by: Phil Elwell ---- - kernel/resource.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/kernel/resource.c -+++ b/kernel/resource.c -@@ -246,6 +246,12 @@ static int __release_resource(struct res - { - struct resource *tmp, **p, *chd; - -+ if (!old->parent) { -+ WARN(old->sibling, "sibling but no parent"); -+ if (old->sibling) -+ return -EINVAL; -+ return 0; -+ } - p = &old->parent->child; - for (;;) { - tmp = *p; diff --git a/target/linux/brcm2708/patches-4.9/0005-mm-Remove-the-PFN-busy-warning.patch b/target/linux/brcm2708/patches-4.9/0005-mm-Remove-the-PFN-busy-warning.patch deleted file mode 100644 index b271d2606d2a..000000000000 --- a/target/linux/brcm2708/patches-4.9/0005-mm-Remove-the-PFN-busy-warning.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 55d0c167f73b9583357fc0af36d7a01666885e0e Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 18 Dec 2014 16:07:15 -0800 -Subject: [PATCH] mm: Remove the PFN busy warning - -See commit dae803e165a11bc88ca8dbc07a11077caf97bbcb -- the warning is -expected sometimes when using CMA. However, that commit still spams -my kernel log with these warnings. - -Signed-off-by: Eric Anholt ---- - mm/page_alloc.c | 2 -- - 1 file changed, 2 deletions(-) - ---- a/mm/page_alloc.c -+++ b/mm/page_alloc.c -@@ -7323,8 +7323,6 @@ int alloc_contig_range(unsigned long sta - - /* Make sure the range is really isolated. */ - if (test_pages_isolated(outer_start, end, false)) { -- pr_info("%s: [%lx, %lx) PFNs busy\n", -- __func__, outer_start, end); - ret = -EBUSY; - goto done; - } diff --git a/target/linux/brcm2708/patches-4.9/0006-irq-bcm2836-Prevent-spurious-interrupts-and-trap-the.patch b/target/linux/brcm2708/patches-4.9/0006-irq-bcm2836-Prevent-spurious-interrupts-and-trap-the.patch deleted file mode 100644 index 5f5bd83600ae..000000000000 --- a/target/linux/brcm2708/patches-4.9/0006-irq-bcm2836-Prevent-spurious-interrupts-and-trap-the.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 0badcb291f4fb5c3477c37b4ad4a0e27dd863272 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 4 Dec 2015 17:41:50 +0000 -Subject: [PATCH] irq-bcm2836: Prevent spurious interrupts, and trap them early - -The old arch-specific IRQ macros included a dsb to ensure the -write to clear the mailbox interrupt completed before returning -from the interrupt. The BCM2836 irqchip driver needs the same -precaution to avoid spurious interrupts. - -Spurious interrupts are still possible for other reasons, -though, so trap them early. ---- - drivers/irqchip/irq-bcm2836.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/irqchip/irq-bcm2836.c -+++ b/drivers/irqchip/irq-bcm2836.c -@@ -175,6 +175,7 @@ __exception_irq_entry bcm2836_arm_irqchi - u32 ipi = ffs(mbox_val) - 1; - - writel(1 << ipi, mailbox0); -+ dsb(sy); - handle_IPI(ipi, regs); - #endif - } else if (stat) { diff --git a/target/linux/brcm2708/patches-4.9/0007-irqchip-bcm2835-Add-FIQ-support.patch b/target/linux/brcm2708/patches-4.9/0007-irqchip-bcm2835-Add-FIQ-support.patch deleted file mode 100644 index 56be640fd213..000000000000 --- a/target/linux/brcm2708/patches-4.9/0007-irqchip-bcm2835-Add-FIQ-support.patch +++ /dev/null @@ -1,127 +0,0 @@ -From 697bdb968798a2bb37c767582ba54fc6486c5de8 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= -Date: Fri, 12 Jun 2015 19:01:05 +0200 -Subject: [PATCH] irqchip: bcm2835: Add FIQ support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add a duplicate irq range with an offset on the hwirq's so the -driver can detect that enable_fiq() is used. -Tested with downstream dwc_otg USB controller driver. - -Signed-off-by: Noralf Trønnes -Reviewed-by: Eric Anholt -Acked-by: Stephen Warren ---- - arch/arm/mach-bcm/Kconfig | 1 + - drivers/irqchip/irq-bcm2835.c | 51 ++++++++++++++++++++++++++++++++++++++----- - 2 files changed, 47 insertions(+), 5 deletions(-) - ---- a/arch/arm/mach-bcm/Kconfig -+++ b/arch/arm/mach-bcm/Kconfig -@@ -152,6 +152,7 @@ config ARCH_BCM2835 - select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 - select CLKSRC_OF - select BCM2835_TIMER -+ select FIQ - select PINCTRL - select PINCTRL_BCM2835 - help ---- a/drivers/irqchip/irq-bcm2835.c -+++ b/drivers/irqchip/irq-bcm2835.c -@@ -54,7 +54,7 @@ - #include - - /* Put the bank and irq (32 bits) into the hwirq */ --#define MAKE_HWIRQ(b, n) ((b << 5) | (n)) -+#define MAKE_HWIRQ(b, n) (((b) << 5) | (n)) - #define HWIRQ_BANK(i) (i >> 5) - #define HWIRQ_BIT(i) BIT(i & 0x1f) - -@@ -70,9 +70,13 @@ - | SHORTCUT1_MASK | SHORTCUT2_MASK) - - #define REG_FIQ_CONTROL 0x0c -+#define REG_FIQ_ENABLE 0x80 -+#define REG_FIQ_DISABLE 0 - - #define NR_BANKS 3 - #define IRQS_PER_BANK 32 -+#define NUMBER_IRQS MAKE_HWIRQ(NR_BANKS, 0) -+#define FIQ_START (NR_IRQS_BANK0 + MAKE_HWIRQ(NR_BANKS - 1, 0)) - - static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 }; - static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 }; -@@ -97,14 +101,38 @@ static void __exception_irq_entry bcm283 - struct pt_regs *regs); - static void bcm2836_chained_handle_irq(struct irq_desc *desc); - -+static inline unsigned int hwirq_to_fiq(unsigned long hwirq) -+{ -+ hwirq -= NUMBER_IRQS; -+ /* -+ * The hwirq numbering used in this driver is: -+ * BASE (0-7) GPU1 (32-63) GPU2 (64-95). -+ * This differ from the one used in the FIQ register: -+ * GPU1 (0-31) GPU2 (32-63) BASE (64-71) -+ */ -+ if (hwirq >= 32) -+ return hwirq - 32; -+ -+ return hwirq + 64; -+} -+ - static void armctrl_mask_irq(struct irq_data *d) - { -- writel_relaxed(HWIRQ_BIT(d->hwirq), intc.disable[HWIRQ_BANK(d->hwirq)]); -+ if (d->hwirq >= NUMBER_IRQS) -+ writel_relaxed(REG_FIQ_DISABLE, intc.base + REG_FIQ_CONTROL); -+ else -+ writel_relaxed(HWIRQ_BIT(d->hwirq), -+ intc.disable[HWIRQ_BANK(d->hwirq)]); - } - - static void armctrl_unmask_irq(struct irq_data *d) - { -- writel_relaxed(HWIRQ_BIT(d->hwirq), intc.enable[HWIRQ_BANK(d->hwirq)]); -+ if (d->hwirq >= NUMBER_IRQS) -+ writel_relaxed(REG_FIQ_ENABLE | hwirq_to_fiq(d->hwirq), -+ intc.base + REG_FIQ_CONTROL); -+ else -+ writel_relaxed(HWIRQ_BIT(d->hwirq), -+ intc.enable[HWIRQ_BANK(d->hwirq)]); - } - - static struct irq_chip armctrl_chip = { -@@ -150,8 +178,9 @@ static int __init armctrl_of_init(struct - panic("%s: unable to map IC registers\n", - node->full_name); - -- intc.domain = irq_domain_add_linear(node, MAKE_HWIRQ(NR_BANKS, 0), -- &armctrl_ops, NULL); -+ intc.base = base; -+ intc.domain = irq_domain_add_linear(node, NUMBER_IRQS * 2, -+ &armctrl_ops, NULL); - if (!intc.domain) - panic("%s: unable to create IRQ domain\n", node->full_name); - -@@ -181,6 +210,18 @@ static int __init armctrl_of_init(struct - set_handle_irq(bcm2835_handle_irq); - } - -+ /* Make a duplicate irq range which is used to enable FIQ */ -+ for (b = 0; b < NR_BANKS; b++) { -+ for (i = 0; i < bank_irqs[b]; i++) { -+ irq = irq_create_mapping(intc.domain, -+ MAKE_HWIRQ(b, i) + NUMBER_IRQS); -+ BUG_ON(irq <= 0); -+ irq_set_chip(irq, &armctrl_chip); -+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); -+ } -+ } -+ init_FIQ(FIQ_START); -+ - return 0; - } - diff --git a/target/linux/brcm2708/patches-4.9/0008-irqchip-irq-bcm2835-Add-2836-FIQ-support.patch b/target/linux/brcm2708/patches-4.9/0008-irqchip-irq-bcm2835-Add-2836-FIQ-support.patch deleted file mode 100644 index 9c7515f4eba8..000000000000 --- a/target/linux/brcm2708/patches-4.9/0008-irqchip-irq-bcm2835-Add-2836-FIQ-support.patch +++ /dev/null @@ -1,99 +0,0 @@ -From 78b53021ae0715792fb6a89bd9e7c02fc254be5c Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= -Date: Fri, 23 Oct 2015 16:26:55 +0200 -Subject: [PATCH] irqchip: irq-bcm2835: Add 2836 FIQ support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Noralf Trønnes ---- - drivers/irqchip/irq-bcm2835.c | 43 +++++++++++++++++++++++++++++++++++++++++-- - 1 file changed, 41 insertions(+), 2 deletions(-) - ---- a/drivers/irqchip/irq-bcm2835.c -+++ b/drivers/irqchip/irq-bcm2835.c -@@ -50,8 +50,11 @@ - #include - #include - #include -+#include -+#include - - #include -+#include - - /* Put the bank and irq (32 bits) into the hwirq */ - #define MAKE_HWIRQ(b, n) (((b) << 5) | (n)) -@@ -69,6 +72,9 @@ - #define BANK0_VALID_MASK (BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \ - | SHORTCUT1_MASK | SHORTCUT2_MASK) - -+#undef ARM_LOCAL_GPU_INT_ROUTING -+#define ARM_LOCAL_GPU_INT_ROUTING 0x0c -+ - #define REG_FIQ_CONTROL 0x0c - #define REG_FIQ_ENABLE 0x80 - #define REG_FIQ_DISABLE 0 -@@ -94,6 +100,7 @@ struct armctrl_ic { - void __iomem *enable[NR_BANKS]; - void __iomem *disable[NR_BANKS]; - struct irq_domain *domain; -+ struct regmap *local_regmap; - }; - - static struct armctrl_ic intc __read_mostly; -@@ -127,12 +134,35 @@ static void armctrl_mask_irq(struct irq_ - - static void armctrl_unmask_irq(struct irq_data *d) - { -- if (d->hwirq >= NUMBER_IRQS) -+ if (d->hwirq >= NUMBER_IRQS) { -+ if (num_online_cpus() > 1) { -+ unsigned int data; -+ int ret; -+ -+ if (!intc.local_regmap) { -+ pr_err("FIQ is disabled due to missing regmap\n"); -+ return; -+ } -+ -+ ret = regmap_read(intc.local_regmap, -+ ARM_LOCAL_GPU_INT_ROUTING, &data); -+ if (ret) { -+ pr_err("Failed to read int routing %d\n", ret); -+ return; -+ } -+ -+ data &= ~0xc; -+ data |= (1 << 2); -+ regmap_write(intc.local_regmap, -+ ARM_LOCAL_GPU_INT_ROUTING, data); -+ } -+ - writel_relaxed(REG_FIQ_ENABLE | hwirq_to_fiq(d->hwirq), - intc.base + REG_FIQ_CONTROL); -- else -+ } else { - writel_relaxed(HWIRQ_BIT(d->hwirq), - intc.enable[HWIRQ_BANK(d->hwirq)]); -+ } - } - - static struct irq_chip armctrl_chip = { -@@ -210,6 +240,15 @@ static int __init armctrl_of_init(struct - set_handle_irq(bcm2835_handle_irq); - } - -+ if (is_2836) { -+ intc.local_regmap = -+ syscon_regmap_lookup_by_compatible("brcm,bcm2836-arm-local"); -+ if (IS_ERR(intc.local_regmap)) { -+ pr_err("Failed to get local register map. FIQ is disabled for cpus > 1\n"); -+ intc.local_regmap = NULL; -+ } -+ } -+ - /* Make a duplicate irq range which is used to enable FIQ */ - for (b = 0; b < NR_BANKS; b++) { - for (i = 0; i < bank_irqs[b]; i++) { diff --git a/target/linux/brcm2708/patches-4.9/0009-spidev-Add-spidev-compatible-string-to-silence-warni.patch b/target/linux/brcm2708/patches-4.9/0009-spidev-Add-spidev-compatible-string-to-silence-warni.patch deleted file mode 100644 index 0c5f0eef10c6..000000000000 --- a/target/linux/brcm2708/patches-4.9/0009-spidev-Add-spidev-compatible-string-to-silence-warni.patch +++ /dev/null @@ -1,20 +0,0 @@ -From 21a313f8517a1be2b0962710ffe9ad94e7334ba1 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 14 Jul 2015 10:26:09 +0100 -Subject: [PATCH] spidev: Add "spidev" compatible string to silence warning - -See: https://github.com/raspberrypi/linux/issues/1054 ---- - drivers/spi/spidev.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/spi/spidev.c -+++ b/drivers/spi/spidev.c -@@ -697,6 +697,7 @@ static const struct of_device_id spidev_ - { .compatible = "rohm,dh2228fv" }, - { .compatible = "lineartechnology,ltc2488" }, - { .compatible = "siliconlabs,si3210" }, -+ { .compatible = "spidev" }, - {}, - }; - MODULE_DEVICE_TABLE(of, spidev_dt_ids); diff --git a/target/linux/brcm2708/patches-4.9/0010-serial-8250-Don-t-crash-when-nr_uarts-is-0.patch b/target/linux/brcm2708/patches-4.9/0010-serial-8250-Don-t-crash-when-nr_uarts-is-0.patch deleted file mode 100644 index 447f1ce08593..000000000000 --- a/target/linux/brcm2708/patches-4.9/0010-serial-8250-Don-t-crash-when-nr_uarts-is-0.patch +++ /dev/null @@ -1,20 +0,0 @@ -From cc016c1876877aa42a84cc9c0c89af1b7410ff67 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 30 Jun 2015 14:12:42 +0100 -Subject: [PATCH] serial: 8250: Don't crash when nr_uarts is 0 - ---- - drivers/tty/serial/8250/8250_core.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/tty/serial/8250/8250_core.c -+++ b/drivers/tty/serial/8250/8250_core.c -@@ -509,6 +509,8 @@ static void __init serial8250_isa_init_p - - if (nr_uarts > UART_NR) - nr_uarts = UART_NR; -+ if (!nr_uarts) -+ return; - - for (i = 0; i < nr_uarts; i++) { - struct uart_8250_port *up = &serial8250_ports[i]; diff --git a/target/linux/brcm2708/patches-4.9/0011-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch b/target/linux/brcm2708/patches-4.9/0011-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch deleted file mode 100644 index 319eafbb1954..000000000000 --- a/target/linux/brcm2708/patches-4.9/0011-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch +++ /dev/null @@ -1,21 +0,0 @@ -From ea9188a48450ddab740fe5ffe6733fb2362ea5c8 Mon Sep 17 00:00:00 2001 -From: notro -Date: Thu, 10 Jul 2014 13:59:47 +0200 -Subject: [PATCH] pinctrl-bcm2835: Set base to 0 give expected gpio numbering - -Signed-off-by: Noralf Tronnes ---- - drivers/pinctrl/bcm/pinctrl-bcm2835.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c -+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c -@@ -386,7 +386,7 @@ static struct gpio_chip bcm2835_gpio_chi - .get = bcm2835_gpio_get, - .set = bcm2835_gpio_set, - .to_irq = bcm2835_gpio_to_irq, -- .base = -1, -+ .base = 0, - .ngpio = BCM2835_NUM_GPIOS, - .can_sleep = false, - }; diff --git a/target/linux/brcm2708/patches-4.9/0012-pinctrl-bcm2835-Fix-interrupt-handling-for-GPIOs-28-.patch b/target/linux/brcm2708/patches-4.9/0012-pinctrl-bcm2835-Fix-interrupt-handling-for-GPIOs-28-.patch deleted file mode 100644 index b29aa8d7fbcf..000000000000 --- a/target/linux/brcm2708/patches-4.9/0012-pinctrl-bcm2835-Fix-interrupt-handling-for-GPIOs-28-.patch +++ /dev/null @@ -1,146 +0,0 @@ -From 6f92d02f7af5a9b5ed5ded7dbeb18bf2bbb2ad85 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 24 Feb 2015 13:40:50 +0000 -Subject: [PATCH] pinctrl-bcm2835: Fix interrupt handling for GPIOs 28-31 and - 46-53 - -Contrary to the documentation, the BCM2835 GPIO controller actually has -four interrupt lines - one each for the three IRQ groups and one common. Rather -confusingly, the GPIO interrupt groups don't correspond directly with the GPIO -control banks. Instead, GPIOs 0-27 generate IRQ GPIO0, 28-45 GPIO1 and -46-53 GPIO2. - -Awkwardly, the GPIOS for IRQ GPIO1 straddle two 32-entry GPIO banks, so it is -cleaner to split out a function to process the interrupts for a single GPIO -bank. - -This bug has only just been observed because GPIOs above 27 can only be -accessed on an old Raspberry Pi with the optional P5 header fitted, where -the pins are often used for I2S instead. ---- - drivers/pinctrl/bcm/pinctrl-bcm2835.c | 51 ++++++++++++++++++++++++++--------- - 1 file changed, 39 insertions(+), 12 deletions(-) - ---- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c -+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c -@@ -47,6 +47,7 @@ - #define MODULE_NAME "pinctrl-bcm2835" - #define BCM2835_NUM_GPIOS 54 - #define BCM2835_NUM_BANKS 2 -+#define BCM2835_NUM_IRQS 3 - - #define BCM2835_PIN_BITMAP_SZ \ - DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8) -@@ -88,13 +89,13 @@ enum bcm2835_pinconf_pull { - - struct bcm2835_gpio_irqdata { - struct bcm2835_pinctrl *pc; -- int bank; -+ int irqgroup; - }; - - struct bcm2835_pinctrl { - struct device *dev; - void __iomem *base; -- int irq[BCM2835_NUM_BANKS]; -+ int irq[BCM2835_NUM_IRQS]; - - /* note: locking assumes each bank will have its own unsigned long */ - unsigned long enabled_irq_map[BCM2835_NUM_BANKS]; -@@ -105,7 +106,7 @@ struct bcm2835_pinctrl { - struct gpio_chip gpio_chip; - struct pinctrl_gpio_range gpio_range; - -- struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_BANKS]; -+ struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_IRQS]; - spinlock_t irq_lock[BCM2835_NUM_BANKS]; - }; - -@@ -391,17 +392,16 @@ static struct gpio_chip bcm2835_gpio_chi - .can_sleep = false, - }; - --static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id) -+static int bcm2835_gpio_irq_handle_bank(struct bcm2835_pinctrl *pc, -+ unsigned int bank, u32 mask) - { -- struct bcm2835_gpio_irqdata *irqdata = dev_id; -- struct bcm2835_pinctrl *pc = irqdata->pc; -- int bank = irqdata->bank; - unsigned long events; - unsigned offset; - unsigned gpio; - unsigned int type; - - events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4); -+ events &= mask; - events &= pc->enabled_irq_map[bank]; - for_each_set_bit(offset, &events, 32) { - gpio = (32 * bank) + offset; -@@ -409,7 +409,30 @@ static irqreturn_t bcm2835_gpio_irq_hand - - generic_handle_irq(irq_linear_revmap(pc->irq_domain, gpio)); - } -- return events ? IRQ_HANDLED : IRQ_NONE; -+ -+ return (events != 0); -+} -+ -+static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id) -+{ -+ struct bcm2835_gpio_irqdata *irqdata = dev_id; -+ struct bcm2835_pinctrl *pc = irqdata->pc; -+ int handled = 0; -+ -+ switch (irqdata->irqgroup) { -+ case 0: /* IRQ0 covers GPIOs 0-27 */ -+ handled = bcm2835_gpio_irq_handle_bank(pc, 0, 0x0fffffff); -+ break; -+ case 1: /* IRQ1 covers GPIOs 28-45 */ -+ handled = bcm2835_gpio_irq_handle_bank(pc, 0, 0xf0000000) | -+ bcm2835_gpio_irq_handle_bank(pc, 1, 0x00003fff); -+ break; -+ case 2: /* IRQ2 covers GPIOs 46-53 */ -+ handled = bcm2835_gpio_irq_handle_bank(pc, 1, 0x003fc000); -+ break; -+ } -+ -+ return handled ? IRQ_HANDLED : IRQ_NONE; - } - - static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc, -@@ -998,8 +1021,6 @@ static int bcm2835_pinctrl_probe(struct - for (i = 0; i < BCM2835_NUM_BANKS; i++) { - unsigned long events; - unsigned offset; -- int len; -- char *name; - - /* clear event detection flags */ - bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0); -@@ -1014,10 +1035,15 @@ static int bcm2835_pinctrl_probe(struct - for_each_set_bit(offset, &events, 32) - bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset)); - -+ spin_lock_init(&pc->irq_lock[i]); -+ } -+ -+ for (i = 0; i < BCM2835_NUM_IRQS; i++) { -+ int len; -+ char *name; - pc->irq[i] = irq_of_parse_and_map(np, i); - pc->irq_data[i].pc = pc; -- pc->irq_data[i].bank = i; -- spin_lock_init(&pc->irq_lock[i]); -+ pc->irq_data[i].irqgroup = i; - - len = strlen(dev_name(pc->dev)) + 16; - name = devm_kzalloc(pc->dev, len, GFP_KERNEL); -@@ -1074,6 +1100,7 @@ static struct platform_driver bcm2835_pi - .remove = bcm2835_pinctrl_remove, - .driver = { - .name = MODULE_NAME, -+ .owner = THIS_MODULE, - .of_match_table = bcm2835_pinctrl_match, - }, - }; diff --git a/target/linux/brcm2708/patches-4.9/0013-pinctrl-bcm2835-Only-request-the-interrupts-listed-i.patch b/target/linux/brcm2708/patches-4.9/0013-pinctrl-bcm2835-Only-request-the-interrupts-listed-i.patch deleted file mode 100644 index d2b764f98a18..000000000000 --- a/target/linux/brcm2708/patches-4.9/0013-pinctrl-bcm2835-Only-request-the-interrupts-listed-i.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 6b37913f47f5fbd2748ea9abfb9a17fcfb1b5d29 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 26 Feb 2015 09:58:22 +0000 -Subject: [PATCH] pinctrl-bcm2835: Only request the interrupts listed in the - DTB - -Although the GPIO controller can generate three interrupts (four counting -the common one), the device tree files currently only specify two. In the -absence of the third, simply don't register that interrupt (as opposed to -registering 0), which has the effect of making it impossible to generate -interrupts for GPIOs 46-53 which, since they share pins with the SD card -interface, is unlikely to be a problem. ---- - drivers/pinctrl/bcm/pinctrl-bcm2835.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c -+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c -@@ -1042,6 +1042,8 @@ static int bcm2835_pinctrl_probe(struct - int len; - char *name; - pc->irq[i] = irq_of_parse_and_map(np, i); -+ if (pc->irq[i] == 0) -+ break; - pc->irq_data[i].pc = pc; - pc->irq_data[i].irqgroup = i; - diff --git a/target/linux/brcm2708/patches-4.9/0014-pinctrl-bcm2835-Return-pins-to-inputs-when-freed.patch b/target/linux/brcm2708/patches-4.9/0014-pinctrl-bcm2835-Return-pins-to-inputs-when-freed.patch deleted file mode 100644 index 4eb4923021f6..000000000000 --- a/target/linux/brcm2708/patches-4.9/0014-pinctrl-bcm2835-Return-pins-to-inputs-when-freed.patch +++ /dev/null @@ -1,41 +0,0 @@ -From e64023aab5addf920379e9f919d7c5cd4c8d0981 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 6 May 2016 12:32:47 +0100 -Subject: [PATCH] pinctrl-bcm2835: Return pins to inputs when freed - -When dynamically unloading overlays, it is important that freed pins are -restored to being inputs to prevent functions from being enabled in -multiple places at once. - -Signed-off-by: Phil Elwell ---- - drivers/pinctrl/bcm/pinctrl-bcm2835.c | 11 +++++++++++ - 1 file changed, 11 insertions(+) - ---- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c -+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c -@@ -844,6 +844,16 @@ static const struct pinctrl_ops bcm2835_ - .dt_free_map = bcm2835_pctl_dt_free_map, - }; - -+static int bcm2835_pmx_free(struct pinctrl_dev *pctldev, -+ unsigned offset) -+{ -+ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); -+ -+ /* disable by setting to GPIO_IN */ -+ bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN); -+ return 0; -+} -+ - static int bcm2835_pmx_get_functions_count(struct pinctrl_dev *pctldev) - { - return BCM2835_FSEL_COUNT; -@@ -903,6 +913,7 @@ static int bcm2835_pmx_gpio_set_directio - } - - static const struct pinmux_ops bcm2835_pmx_ops = { -+ .free = bcm2835_pmx_free, - .get_functions_count = bcm2835_pmx_get_functions_count, - .get_function_name = bcm2835_pmx_get_function_name, - .get_function_groups = bcm2835_pmx_get_function_groups, diff --git a/target/linux/brcm2708/patches-4.9/0015-spi-bcm2835-Support-pin-groups-other-than-7-11.patch b/target/linux/brcm2708/patches-4.9/0015-spi-bcm2835-Support-pin-groups-other-than-7-11.patch deleted file mode 100644 index 62145a2f07d5..000000000000 --- a/target/linux/brcm2708/patches-4.9/0015-spi-bcm2835-Support-pin-groups-other-than-7-11.patch +++ /dev/null @@ -1,80 +0,0 @@ -From 6603973d0897c1a9b3b1a813c8ab1204efe98fe0 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 24 Jun 2015 14:10:44 +0100 -Subject: [PATCH] spi-bcm2835: Support pin groups other than 7-11 - -The spi-bcm2835 driver automatically uses GPIO chip-selects due to -some unreliability of the native ones. In doing so it chooses the -same pins as the native chip-selects would use, but the existing -code always uses pins 7 and 8, wherever the SPI function is mapped. - -Search the pinctrl group assigned to the driver for pins that -correspond to native chip-selects, and use those for GPIO chip- -selects. - -Signed-off-by: Phil Elwell ---- - drivers/spi/spi-bcm2835.c | 45 +++++++++++++++++++++++++++++++++++++-------- - 1 file changed, 37 insertions(+), 8 deletions(-) - ---- a/drivers/spi/spi-bcm2835.c -+++ b/drivers/spi/spi-bcm2835.c -@@ -688,6 +688,8 @@ static int bcm2835_spi_setup(struct spi_ - { - int err; - struct gpio_chip *chip; -+ struct device_node *pins; -+ u32 pingroup_index; - /* - * sanity checking the native-chipselects - */ -@@ -704,15 +706,42 @@ static int bcm2835_spi_setup(struct spi_ - "setup: only two native chip-selects are supported\n"); - return -EINVAL; - } -- /* now translate native cs to GPIO */ - -- /* get the gpio chip for the base */ -- chip = gpiochip_find("pinctrl-bcm2835", chip_match_name); -- if (!chip) -- return 0; -+ /* now translate native cs to GPIO */ -+ /* first look for chip select pins in the devices pin groups */ -+ for (pingroup_index = 0; -+ (pins = of_parse_phandle(spi->master->dev.of_node, -+ "pinctrl-0", -+ pingroup_index)) != 0; -+ pingroup_index++) { -+ u32 pin; -+ u32 pin_index; -+ for (pin_index = 0; -+ of_property_read_u32_index(pins, -+ "brcm,pins", -+ pin_index, -+ &pin) == 0; -+ pin_index++) { -+ if (((spi->chip_select == 0) && -+ ((pin == 8) || (pin == 36) || (pin == 46))) || -+ ((spi->chip_select == 1) && -+ ((pin == 7) || (pin == 35)))) { -+ spi->cs_gpio = pin; -+ break; -+ } -+ } -+ of_node_put(pins); -+ } -+ /* if that fails, assume GPIOs 7-11 are used */ -+ if (!gpio_is_valid(spi->cs_gpio) ) { -+ /* get the gpio chip for the base */ -+ chip = gpiochip_find("pinctrl-bcm2835", chip_match_name); -+ if (!chip) -+ return 0; - -- /* and calculate the real CS */ -- spi->cs_gpio = chip->base + 8 - spi->chip_select; -+ /* and calculate the real CS */ -+ spi->cs_gpio = chip->base + 8 - spi->chip_select; -+ } - - /* and set up the "mode" and level */ - dev_info(&spi->dev, "setting up native-CS%i as GPIO %i\n", diff --git a/target/linux/brcm2708/patches-4.9/0016-spi-bcm2835-Disable-forced-software-CS.patch b/target/linux/brcm2708/patches-4.9/0016-spi-bcm2835-Disable-forced-software-CS.patch deleted file mode 100644 index 5d4062c4e497..000000000000 --- a/target/linux/brcm2708/patches-4.9/0016-spi-bcm2835-Disable-forced-software-CS.patch +++ /dev/null @@ -1,34 +0,0 @@ -From c0aaf0d4213bfc9df85c397cd974f7a6f15255f2 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 1 Jul 2016 22:09:24 +0100 -Subject: [PATCH] spi-bcm2835: Disable forced software CS - -Select software CS in bcm2708_common.dtsi, and disable the automatic -conversion in the driver to allow hardware CS to be re-enabled with an -overlay. - -See: https://github.com/raspberrypi/linux/issues/1547 - -Signed-off-by: Phil Elwell ---- - drivers/spi/spi-bcm2835.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/spi/spi-bcm2835.c -+++ b/drivers/spi/spi-bcm2835.c -@@ -707,6 +707,7 @@ static int bcm2835_spi_setup(struct spi_ - return -EINVAL; - } - -+#if 0 - /* now translate native cs to GPIO */ - /* first look for chip select pins in the devices pin groups */ - for (pingroup_index = 0; -@@ -756,6 +757,7 @@ static int bcm2835_spi_setup(struct spi_ - spi->chip_select, spi->cs_gpio, err); - return err; - } -+#endif - - return 0; - } diff --git a/target/linux/brcm2708/patches-4.9/0017-spi-bcm2835-Remove-unused-code.patch b/target/linux/brcm2708/patches-4.9/0017-spi-bcm2835-Remove-unused-code.patch deleted file mode 100644 index 08577fce2af4..000000000000 --- a/target/linux/brcm2708/patches-4.9/0017-spi-bcm2835-Remove-unused-code.patch +++ /dev/null @@ -1,88 +0,0 @@ -From 21f7f9d8146dd9e5a860198781febf78aafee3d1 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 8 Nov 2016 21:35:38 +0000 -Subject: [PATCH] spi-bcm2835: Remove unused code - ---- - drivers/spi/spi-bcm2835.c | 61 ----------------------------------------------- - 1 file changed, 61 deletions(-) - ---- a/drivers/spi/spi-bcm2835.c -+++ b/drivers/spi/spi-bcm2835.c -@@ -679,17 +679,8 @@ static void bcm2835_spi_set_cs(struct sp - bcm2835_wr(bs, BCM2835_SPI_CS, cs); - } - --static int chip_match_name(struct gpio_chip *chip, void *data) --{ -- return !strcmp(chip->label, data); --} -- - static int bcm2835_spi_setup(struct spi_device *spi) - { -- int err; -- struct gpio_chip *chip; -- struct device_node *pins; -- u32 pingroup_index; - /* - * sanity checking the native-chipselects - */ -@@ -707,58 +698,6 @@ static int bcm2835_spi_setup(struct spi_ - return -EINVAL; - } - --#if 0 -- /* now translate native cs to GPIO */ -- /* first look for chip select pins in the devices pin groups */ -- for (pingroup_index = 0; -- (pins = of_parse_phandle(spi->master->dev.of_node, -- "pinctrl-0", -- pingroup_index)) != 0; -- pingroup_index++) { -- u32 pin; -- u32 pin_index; -- for (pin_index = 0; -- of_property_read_u32_index(pins, -- "brcm,pins", -- pin_index, -- &pin) == 0; -- pin_index++) { -- if (((spi->chip_select == 0) && -- ((pin == 8) || (pin == 36) || (pin == 46))) || -- ((spi->chip_select == 1) && -- ((pin == 7) || (pin == 35)))) { -- spi->cs_gpio = pin; -- break; -- } -- } -- of_node_put(pins); -- } -- /* if that fails, assume GPIOs 7-11 are used */ -- if (!gpio_is_valid(spi->cs_gpio) ) { -- /* get the gpio chip for the base */ -- chip = gpiochip_find("pinctrl-bcm2835", chip_match_name); -- if (!chip) -- return 0; -- -- /* and calculate the real CS */ -- spi->cs_gpio = chip->base + 8 - spi->chip_select; -- } -- -- /* and set up the "mode" and level */ -- dev_info(&spi->dev, "setting up native-CS%i as GPIO %i\n", -- spi->chip_select, spi->cs_gpio); -- -- /* set up GPIO as output and pull to the correct level */ -- err = gpio_direction_output(spi->cs_gpio, -- (spi->mode & SPI_CS_HIGH) ? 0 : 1); -- if (err) { -- dev_err(&spi->dev, -- "could not set CS%i gpio %i as output: %i", -- spi->chip_select, spi->cs_gpio, err); -- return err; -- } --#endif -- - return 0; - } - diff --git a/target/linux/brcm2708/patches-4.9/0018-ARM-bcm2835-Set-Serial-number-and-Revision.patch b/target/linux/brcm2708/patches-4.9/0018-ARM-bcm2835-Set-Serial-number-and-Revision.patch deleted file mode 100644 index cd14dcc1816c..000000000000 --- a/target/linux/brcm2708/patches-4.9/0018-ARM-bcm2835-Set-Serial-number-and-Revision.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 78678f8e9f7fbbafadfecd54a5fb166a94d8d84f Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= -Date: Wed, 3 Jun 2015 12:26:13 +0200 -Subject: [PATCH] ARM: bcm2835: Set Serial number and Revision -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The VideoCore bootloader passes in Serial number and -Revision number through Device Tree. Make these available to -userspace through /proc/cpuinfo. - -Mainline status: - -There is a commit in linux-next that standardize passing the serial -number through Device Tree (string: /serial-number): -ARM: 8355/1: arch: Show the serial number from devicetree in cpuinfo - -There was an attempt to do the same with the revision number, but it -didn't get in: -[PATCH v2 1/2] arm: devtree: Set system_rev from DT revision - -Signed-off-by: Noralf Trønnes ---- - arch/arm/mach-bcm/board_bcm2835.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/arch/arm/mach-bcm/board_bcm2835.c -+++ b/arch/arm/mach-bcm/board_bcm2835.c -@@ -16,13 +16,23 @@ - #include - #include - #include -+#include - - #include - #include - - static void __init bcm2835_init(void) - { -+ struct device_node *np = of_find_node_by_path("/system"); -+ u32 val; -+ u64 val64; -+ - bcm2835_init_clocks(); -+ -+ if (!of_property_read_u32(np, "linux,revision", &val)) -+ system_rev = val; -+ if (!of_property_read_u64(np, "linux,serial", &val64)) -+ system_serial_low = val64; - } - - static const char * const bcm2835_compat[] = { diff --git a/target/linux/brcm2708/patches-4.9/0019-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch b/target/linux/brcm2708/patches-4.9/0019-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch deleted file mode 100644 index e800713ab836..000000000000 --- a/target/linux/brcm2708/patches-4.9/0019-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch +++ /dev/null @@ -1,100 +0,0 @@ -From e4f0f7daebca7005c67bf7ae3f6f59df587e91d5 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= -Date: Sat, 3 Oct 2015 22:22:55 +0200 -Subject: [PATCH] dmaengine: bcm2835: Load driver early and support legacy API -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Load driver early since at least bcm2708_fb doesn't support deferred -probing and even if it did, we don't want the video driver deferred. -Support the legacy DMA API which is needed by bcm2708_fb. -Don't mask out channel 2. - -Signed-off-by: Noralf Trønnes ---- - drivers/dma/Kconfig | 2 +- - drivers/dma/bcm2835-dma.c | 26 +++++++++++++++++++++++++- - 2 files changed, 26 insertions(+), 2 deletions(-) - ---- a/drivers/dma/Kconfig -+++ b/drivers/dma/Kconfig -@@ -108,7 +108,7 @@ config COH901318 - - config DMA_BCM2835 - tristate "BCM2835 DMA engine support" -- depends on ARCH_BCM2835 -+ depends on ARCH_BCM2835 || ARCH_BCM2708 || ARCH_BCM2709 - select DMA_ENGINE - select DMA_VIRTUAL_CHANNELS - ---- a/drivers/dma/bcm2835-dma.c -+++ b/drivers/dma/bcm2835-dma.c -@@ -37,6 +37,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -48,6 +49,7 @@ - - #define BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED 14 - #define BCM2835_DMA_CHAN_NAME_SIZE 8 -+#define BCM2835_DMA_BULK_MASK BIT(0) - - struct bcm2835_dmadev { - struct dma_device ddev; -@@ -922,6 +924,9 @@ static int bcm2835_dma_probe(struct plat - base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); -+ rc = bcm_dmaman_probe(pdev, base, BCM2835_DMA_BULK_MASK); -+ if (rc) -+ dev_err(&pdev->dev, "Failed to initialize the legacy API\n"); - - od->base = base; - -@@ -959,6 +964,9 @@ static int bcm2835_dma_probe(struct plat - goto err_no_dma; - } - -+ /* Channel 0 is used by the legacy API */ -+ chans_available &= ~BCM2835_DMA_BULK_MASK; -+ - /* get irqs for each channel that we support */ - for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) { - /* skip masked out channels */ -@@ -1033,6 +1041,7 @@ static int bcm2835_dma_remove(struct pla - { - struct bcm2835_dmadev *od = platform_get_drvdata(pdev); - -+ bcm_dmaman_remove(pdev); - dma_async_device_unregister(&od->ddev); - bcm2835_dma_free(od); - -@@ -1048,7 +1057,22 @@ static struct platform_driver bcm2835_dm - }, - }; - --module_platform_driver(bcm2835_dma_driver); -+static int bcm2835_dma_init(void) -+{ -+ return platform_driver_register(&bcm2835_dma_driver); -+} -+ -+static void bcm2835_dma_exit(void) -+{ -+ platform_driver_unregister(&bcm2835_dma_driver); -+} -+ -+/* -+ * Load after serial driver (arch_initcall) so we see the messages if it fails, -+ * but before drivers (module_init) that need a DMA channel. -+ */ -+subsys_initcall(bcm2835_dma_init); -+module_exit(bcm2835_dma_exit); - - MODULE_ALIAS("platform:bcm2835-dma"); - MODULE_DESCRIPTION("BCM2835 DMA engine driver"); diff --git a/target/linux/brcm2708/patches-4.9/0020-firmware-Updated-mailbox-header.patch b/target/linux/brcm2708/patches-4.9/0020-firmware-Updated-mailbox-header.patch deleted file mode 100644 index 37eb154393e4..000000000000 --- a/target/linux/brcm2708/patches-4.9/0020-firmware-Updated-mailbox-header.patch +++ /dev/null @@ -1,63 +0,0 @@ -From e4edca57f8db4d03ad4dc82dd6761c0142ab310d Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Mon, 25 Jan 2016 17:25:12 +0000 -Subject: [PATCH] firmware: Updated mailbox header - ---- - include/soc/bcm2835/raspberrypi-firmware.h | 11 +++++++++++ - 1 file changed, 11 insertions(+) - ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -63,6 +63,7 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_GET_MIN_VOLTAGE = 0x00030008, - RPI_FIRMWARE_GET_TURBO = 0x00030009, - RPI_FIRMWARE_GET_MAX_TEMPERATURE = 0x0003000a, -+ RPI_FIRMWARE_GET_STC = 0x0003000b, - RPI_FIRMWARE_ALLOCATE_MEMORY = 0x0003000c, - RPI_FIRMWARE_LOCK_MEMORY = 0x0003000d, - RPI_FIRMWARE_UNLOCK_MEMORY = 0x0003000e, -@@ -72,12 +73,15 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_SET_ENABLE_QPU = 0x00030012, - RPI_FIRMWARE_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014, - RPI_FIRMWARE_GET_EDID_BLOCK = 0x00030020, -+ RPI_FIRMWARE_GET_CUSTOMER_OTP = 0x00030021, - RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030, - RPI_FIRMWARE_SET_CLOCK_STATE = 0x00038001, - RPI_FIRMWARE_SET_CLOCK_RATE = 0x00038002, - RPI_FIRMWARE_SET_VOLTAGE = 0x00038003, - RPI_FIRMWARE_SET_TURBO = 0x00038009, -+ RPI_FIRMWARE_SET_CUSTOMER_OTP = 0x00038021, - RPI_FIRMWARE_SET_DOMAIN_STATE = 0x00038030, -+ RPI_FIRMWARE_SET_SDHOST_CLOCK = 0x00038042, - - /* Dispmanx TAGS */ - RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001, -@@ -91,6 +95,8 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_FRAMEBUFFER_GET_VIRTUAL_OFFSET = 0x00040009, - RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN = 0x0004000a, - RPI_FIRMWARE_FRAMEBUFFER_GET_PALETTE = 0x0004000b, -+ RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF = 0x0004000f, -+ RPI_FIRMWARE_FRAMEBUFFER_GET_GPIOVIRTBUF = 0x00040010, - RPI_FIRMWARE_FRAMEBUFFER_RELEASE = 0x00048001, - RPI_FIRMWARE_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003, - RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004, -@@ -100,6 +106,7 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_OFFSET = 0x00044009, - RPI_FIRMWARE_FRAMEBUFFER_TEST_OVERSCAN = 0x0004400a, - RPI_FIRMWARE_FRAMEBUFFER_TEST_PALETTE = 0x0004400b, -+ RPI_FIRMWARE_FRAMEBUFFER_TEST_VSYNC = 0x0004400e, - RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT = 0x00048003, - RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT = 0x00048004, - RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005, -@@ -108,6 +115,10 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, - RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, - RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, -+ RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e, -+ RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f, -+ -+ RPI_FIRMWARE_VCHIQ_INIT = 0x00048010, - - RPI_FIRMWARE_GET_COMMAND_LINE = 0x00050001, - RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001, diff --git a/target/linux/brcm2708/patches-4.9/0021-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch b/target/linux/brcm2708/patches-4.9/0021-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch deleted file mode 100644 index dfa312bc371a..000000000000 --- a/target/linux/brcm2708/patches-4.9/0021-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 599e7165ec6477139dae4f32a12e8d49d5dd8859 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 9 May 2016 17:28:18 -0700 -Subject: [PATCH] clk: bcm2835: Mark GPIO clocks enabled at boot as critical. - -These divide off of PLLD_PER and are used for the ethernet and wifi -PHYs source PLLs. Neither of them is currently represented by a phy -device that would grab the clock for us. - -This keeps other drivers from killing the networking PHYs when they -disable their own clocks and trigger PLLD_PER's refcount going to 0. - -v2: Skip marking as critical if they aren't on at boot. - -Signed-off-by: Eric Anholt ---- - drivers/clk/bcm/clk-bcm2835.c | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1262,6 +1262,15 @@ static struct clk_hw *bcm2835_register_c - init.name = data->name; - init.flags = data->flags | CLK_IGNORE_UNUSED; - -+ /* -+ * Some GPIO clocks for ethernet/wifi PLLs are marked as -+ * critical (since some platforms use them), but if the -+ * firmware didn't have them turned on then they clearly -+ * aren't actually critical. -+ */ -+ if ((cprman_read(cprman, data->ctl_reg) & CM_ENABLE) == 0) -+ init.flags &= ~CLK_IS_CRITICAL; -+ - if (data->is_vpu_clock) { - init.ops = &bcm2835_vpu_clock_clk_ops; - } else { diff --git a/target/linux/brcm2708/patches-4.9/0022-rtc-Add-SPI-alias-for-pcf2123-driver.patch b/target/linux/brcm2708/patches-4.9/0022-rtc-Add-SPI-alias-for-pcf2123-driver.patch deleted file mode 100644 index 4992165a2174..000000000000 --- a/target/linux/brcm2708/patches-4.9/0022-rtc-Add-SPI-alias-for-pcf2123-driver.patch +++ /dev/null @@ -1,20 +0,0 @@ -From ffa1e97926ba3e22f7e41e2b5e16737461bf31ae Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 15 Jun 2016 16:48:41 +0100 -Subject: [PATCH] rtc: Add SPI alias for pcf2123 driver - -Without this alias, Device Tree won't cause the driver -to be loaded. - -See: https://github.com/raspberrypi/linux/pull/1510 ---- - drivers/rtc/rtc-pcf2123.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/rtc/rtc-pcf2123.c -+++ b/drivers/rtc/rtc-pcf2123.c -@@ -472,3 +472,4 @@ module_spi_driver(pcf2123_driver); - MODULE_AUTHOR("Chris Verges "); - MODULE_DESCRIPTION("NXP PCF2123 RTC driver"); - MODULE_LICENSE("GPL"); -+MODULE_ALIAS("spi:rtc-pcf2123"); diff --git a/target/linux/brcm2708/patches-4.9/0023-watchdog-bcm2835-Support-setting-reboot-partition.patch b/target/linux/brcm2708/patches-4.9/0023-watchdog-bcm2835-Support-setting-reboot-partition.patch deleted file mode 100644 index 392ce70232d1..000000000000 --- a/target/linux/brcm2708/patches-4.9/0023-watchdog-bcm2835-Support-setting-reboot-partition.patch +++ /dev/null @@ -1,124 +0,0 @@ -From 0e690096e05c3b4e806381ff38124dbdae3ba877 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= -Date: Fri, 7 Oct 2016 16:50:59 +0200 -Subject: [PATCH] watchdog: bcm2835: Support setting reboot partition -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The Raspberry Pi firmware looks at the RSTS register to know which -partition to boot from. The reboot syscall command -LINUX_REBOOT_CMD_RESTART2 supports passing in a string argument. - -Add support for passing in a partition number 0..63 to boot from. -Partition 63 is a special partiton indicating halt. -If the partition doesn't exist, the firmware falls back to partition 0. - -Signed-off-by: Noralf Trønnes ---- - drivers/watchdog/bcm2835_wdt.c | 61 +++++++++++++++++++++++++----------------- - 1 file changed, 36 insertions(+), 25 deletions(-) - ---- a/drivers/watchdog/bcm2835_wdt.c -+++ b/drivers/watchdog/bcm2835_wdt.c -@@ -35,13 +35,7 @@ - #define PM_RSTC_WRCFG_SET 0x00000030 - #define PM_RSTC_WRCFG_FULL_RESET 0x00000020 - #define PM_RSTC_RESET 0x00000102 -- --/* -- * The Raspberry Pi firmware uses the RSTS register to know which partiton -- * to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10. -- * Partiton 63 is a special partition used by the firmware to indicate halt. -- */ --#define PM_RSTS_RASPBERRYPI_HALT 0x555 -+#define PM_RSTS_PARTITION_CLR 0xfffffaaa - - #define SECS_TO_WDOG_TICKS(x) ((x) << 16) - #define WDOG_TICKS_TO_SECS(x) ((x) >> 16) -@@ -111,15 +105,28 @@ static struct watchdog_device bcm2835_wd - .timeout = WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET), - }; - --static int --bcm2835_restart(struct notifier_block *this, unsigned long mode, void *cmd) -+/* -+ * The Raspberry Pi firmware uses the RSTS register to know which partiton -+ * to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10. -+ * Partiton 63 is a special partition used by the firmware to indicate halt. -+ */ -+ -+static void bcm2835_restart(struct bcm2835_wdt *wdt, u8 partition) - { -- struct bcm2835_wdt *wdt = container_of(this, struct bcm2835_wdt, -- restart_handler); -- u32 val; -+ u32 val, rsts; -+ -+ rsts = (partition & BIT(0)) | ((partition & BIT(1)) << 1) | -+ ((partition & BIT(2)) << 2) | ((partition & BIT(3)) << 3) | -+ ((partition & BIT(4)) << 4) | ((partition & BIT(5)) << 5); -+ -+ val = readl_relaxed(wdt->base + PM_RSTS); -+ val &= PM_RSTS_PARTITION_CLR; -+ val |= PM_PASSWORD | rsts; -+ writel_relaxed(val, wdt->base + PM_RSTS); - - /* use a timeout of 10 ticks (~150us) */ - writel_relaxed(10 | PM_PASSWORD, wdt->base + PM_WDOG); -+ - val = readl_relaxed(wdt->base + PM_RSTC); - val &= PM_RSTC_WRCFG_CLR; - val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET; -@@ -127,6 +134,20 @@ bcm2835_restart(struct notifier_block *t - - /* No sleeping, possibly atomic. */ - mdelay(1); -+} -+ -+static int bcm2835_restart_notifier_call(struct notifier_block *this, -+ unsigned long mode, void *cmd) -+{ -+ struct bcm2835_wdt *wdt = container_of(this, struct bcm2835_wdt, -+ restart_handler); -+ unsigned long long val; -+ u8 partition = 0; -+ -+ if (cmd && !kstrtoull(cmd, 0, &val) && val <= 63) -+ partition = val; -+ -+ bcm2835_restart(wdt, partition); - - return 0; - } -@@ -142,19 +163,9 @@ static void bcm2835_power_off(void) - of_find_compatible_node(NULL, NULL, "brcm,bcm2835-pm-wdt"); - struct platform_device *pdev = of_find_device_by_node(np); - struct bcm2835_wdt *wdt = platform_get_drvdata(pdev); -- u32 val; -- -- /* -- * We set the watchdog hard reset bit here to distinguish this reset -- * from the normal (full) reset. bootcode.bin will not reboot after a -- * hard reset. -- */ -- val = readl_relaxed(wdt->base + PM_RSTS); -- val |= PM_PASSWORD | PM_RSTS_RASPBERRYPI_HALT; -- writel_relaxed(val, wdt->base + PM_RSTS); - -- /* Continue with normal reset mechanism */ -- bcm2835_restart(&wdt->restart_handler, REBOOT_HARD, NULL); -+ /* Partition 63 tells the firmware that this is a halt */ -+ bcm2835_restart(wdt, 63); - } - - static int bcm2835_wdt_probe(struct platform_device *pdev) -@@ -188,7 +199,7 @@ static int bcm2835_wdt_probe(struct plat - return err; - } - -- wdt->restart_handler.notifier_call = bcm2835_restart; -+ wdt->restart_handler.notifier_call = bcm2835_restart_notifier_call; - wdt->restart_handler.priority = 128; - register_restart_handler(&wdt->restart_handler); - if (pm_power_off == NULL) diff --git a/target/linux/brcm2708/patches-4.9/0024-reboot-Use-power-off-rather-than-busy-spinning-when-.patch b/target/linux/brcm2708/patches-4.9/0024-reboot-Use-power-off-rather-than-busy-spinning-when-.patch deleted file mode 100644 index d29517e23f03..000000000000 --- a/target/linux/brcm2708/patches-4.9/0024-reboot-Use-power-off-rather-than-busy-spinning-when-.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 527f4308ee55e8727c486528879b7945b6404a72 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Tue, 5 Apr 2016 19:40:12 +0100 -Subject: [PATCH] reboot: Use power off rather than busy spinning when halt is - requested - ---- - arch/arm/kernel/reboot.c | 4 +--- - 1 file changed, 1 insertion(+), 3 deletions(-) - ---- a/arch/arm/kernel/reboot.c -+++ b/arch/arm/kernel/reboot.c -@@ -102,9 +102,7 @@ void machine_shutdown(void) - */ - void machine_halt(void) - { -- local_irq_disable(); -- smp_send_stop(); -- while (1); -+ machine_power_off(); - } - - /* diff --git a/target/linux/brcm2708/patches-4.9/0025-bcm-Make-RASPBERRYPI_POWER-depend-on-PM.patch b/target/linux/brcm2708/patches-4.9/0025-bcm-Make-RASPBERRYPI_POWER-depend-on-PM.patch deleted file mode 100644 index 90c0a0eca8f4..000000000000 --- a/target/linux/brcm2708/patches-4.9/0025-bcm-Make-RASPBERRYPI_POWER-depend-on-PM.patch +++ /dev/null @@ -1,19 +0,0 @@ -From d63e8989dc891121464a86cec95952f104edf383 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Wed, 9 Nov 2016 13:02:52 +0000 -Subject: [PATCH] bcm: Make RASPBERRYPI_POWER depend on PM - ---- - drivers/soc/bcm/Kconfig | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/soc/bcm/Kconfig -+++ b/drivers/soc/bcm/Kconfig -@@ -4,6 +4,7 @@ config RASPBERRYPI_POWER - bool "Raspberry Pi power domain driver" - depends on ARCH_BCM2835 || (COMPILE_TEST && OF) - depends on RASPBERRYPI_FIRMWARE=y -+ depends on PM - select PM_GENERIC_DOMAINS if PM - help - This enables support for the RPi power domains which can be enabled diff --git a/target/linux/brcm2708/patches-4.9/0026-Register-the-clocks-early-during-the-boot-process.patch b/target/linux/brcm2708/patches-4.9/0026-Register-the-clocks-early-during-the-boot-process.patch deleted file mode 100644 index 9b2a6132364f..000000000000 --- a/target/linux/brcm2708/patches-4.9/0026-Register-the-clocks-early-during-the-boot-process.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 492d6b9c3f1f8cc1eb890dc0eafacae51d6ba2f0 Mon Sep 17 00:00:00 2001 -From: Martin Sperl -Date: Fri, 2 Sep 2016 16:45:27 +0100 -Subject: [PATCH] Register the clocks early during the boot process, so that - special/critical clocks can get enabled early on in the boot process avoiding - the risk of disabling a clock, pll_divider or pll when a claiming driver - fails to install propperly - maybe it needs to defer. - -Signed-off-by: Martin Sperl ---- - drivers/clk/bcm/clk-bcm2835.c | 15 +++++++++++++-- - 1 file changed, 13 insertions(+), 2 deletions(-) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1903,8 +1903,15 @@ static int bcm2835_clk_probe(struct plat - if (ret) - return ret; - -- return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, -+ ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, - &cprman->onecell); -+ if (ret) -+ return ret; -+ -+ /* note that we have registered all the clocks */ -+ dev_dbg(dev, "registered %d clocks\n", asize); -+ -+ return 0; - } - - static const struct of_device_id bcm2835_clk_of_match[] = { -@@ -1921,7 +1928,11 @@ static struct platform_driver bcm2835_cl - .probe = bcm2835_clk_probe, - }; - --builtin_platform_driver(bcm2835_clk_driver); -+static int __init __bcm2835_clk_driver_init(void) -+{ -+ return platform_driver_register(&bcm2835_clk_driver); -+} -+core_initcall(__bcm2835_clk_driver_init); - - MODULE_AUTHOR("Eric Anholt "); - MODULE_DESCRIPTION("BCM2835 clock driver"); diff --git a/target/linux/brcm2708/patches-4.9/0027-bcm2835-rng-Avoid-initialising-if-already-enabled.patch b/target/linux/brcm2708/patches-4.9/0027-bcm2835-rng-Avoid-initialising-if-already-enabled.patch deleted file mode 100644 index 97309da0e196..000000000000 --- a/target/linux/brcm2708/patches-4.9/0027-bcm2835-rng-Avoid-initialising-if-already-enabled.patch +++ /dev/null @@ -1,26 +0,0 @@ -From ecba31015228961644ad8e17bcf132eea9c7a7f3 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Tue, 6 Dec 2016 17:05:39 +0000 -Subject: [PATCH] bcm2835-rng: Avoid initialising if already enabled - -Avoids the 0x40000 cycles of warmup again if firmware has already used it ---- - drivers/char/hw_random/bcm2835-rng.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - ---- a/drivers/char/hw_random/bcm2835-rng.c -+++ b/drivers/char/hw_random/bcm2835-rng.c -@@ -102,9 +102,10 @@ static int bcm2835_rng_probe(struct plat - rng_setup(rng_base); - - /* set warm-up count & enable */ -- __raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS); -- __raw_writel(RNG_RBGEN, rng_base + RNG_CTRL); -- -+ if (!(__raw_readl(rng_base + RNG_CTRL) & RNG_RBGEN)) { -+ __raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS); -+ __raw_writel(RNG_RBGEN, rng_base + RNG_CTRL); -+ } - /* register driver */ - err = hwrng_register(&bcm2835_rng_ops); - if (err) { diff --git a/target/linux/brcm2708/patches-4.9/0028-kbuild-Ignore-dtco-targets-when-filtering-symbols.patch b/target/linux/brcm2708/patches-4.9/0028-kbuild-Ignore-dtco-targets-when-filtering-symbols.patch deleted file mode 100644 index 0f5afac4ea31..000000000000 --- a/target/linux/brcm2708/patches-4.9/0028-kbuild-Ignore-dtco-targets-when-filtering-symbols.patch +++ /dev/null @@ -1,20 +0,0 @@ -From d438958d741a4edbb641791461ee8f6c34495a89 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 24 Aug 2016 16:28:44 +0100 -Subject: [PATCH] kbuild: Ignore dtco targets when filtering symbols - ---- - scripts/Kbuild.include | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/scripts/Kbuild.include -+++ b/scripts/Kbuild.include -@@ -284,7 +284,7 @@ ksym_dep_filter = - $(CPP) $(call flags_nodeps,c_flags) -D__KSYM_DEPS__ $< ;; \ - as_*_S|cpp_s_S) \ - $(CPP) $(call flags_nodeps,a_flags) -D__KSYM_DEPS__ $< ;; \ -- boot*|build*|*cpp_lds_S|dtc|host*|vdso*) : ;; \ -+ boot*|build*|*cpp_lds_S|dtc*|host*|vdso*) : ;; \ - *) echo "Don't know how to preprocess $(1)" >&2; false ;; \ - esac | tr ";" "\n" | sed -rn 's/^.*=== __KSYM_(.*) ===.*$$/KSYM_\1/p' - diff --git a/target/linux/brcm2708/patches-4.9/0029-BCM2835_DT-Fix-I2S-register-map.patch b/target/linux/brcm2708/patches-4.9/0029-BCM2835_DT-Fix-I2S-register-map.patch deleted file mode 100644 index c193ef91674b..000000000000 --- a/target/linux/brcm2708/patches-4.9/0029-BCM2835_DT-Fix-I2S-register-map.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 317560a92ebfdac14df54b6a242dd8f5ecc1fd58 Mon Sep 17 00:00:00 2001 -From: Robert Tiemann -Date: Mon, 20 Jul 2015 11:01:25 +0200 -Subject: [PATCH] BCM2835_DT: Fix I2S register map - ---- - Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt | 4 ++-- - Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt | 4 ++-- - 2 files changed, 4 insertions(+), 4 deletions(-) - ---- a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt -+++ b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt -@@ -74,8 +74,8 @@ Example: - - bcm2835_i2s: i2s@7e203000 { - compatible = "brcm,bcm2835-i2s"; -- reg = < 0x7e203000 0x20>, -- < 0x7e101098 0x02>; -+ reg = < 0x7e203000 0x24>, -+ < 0x7e101098 0x08>; - - dmas = <&dma 2>, - <&dma 3>; ---- a/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt -+++ b/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt -@@ -16,8 +16,8 @@ Example: - - bcm2835_i2s: i2s@7e203000 { - compatible = "brcm,bcm2835-i2s"; -- reg = <0x7e203000 0x20>, -- <0x7e101098 0x02>; -+ reg = <0x7e203000 0x24>, -+ <0x7e101098 0x08>; - - dmas = <&dma 2>, - <&dma 3>; diff --git a/target/linux/brcm2708/patches-4.9/0030-Main-bcm2708-bcm2709-linux-port.patch b/target/linux/brcm2708/patches-4.9/0030-Main-bcm2708-bcm2709-linux-port.patch deleted file mode 100644 index 20e5419a74b5..000000000000 --- a/target/linux/brcm2708/patches-4.9/0030-Main-bcm2708-bcm2709-linux-port.patch +++ /dev/null @@ -1,199 +0,0 @@ -From 9874eb6473865b9d975a7c3756099955e7454e21 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Sun, 12 May 2013 12:24:19 +0100 -Subject: [PATCH] Main bcm2708/bcm2709 linux port -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: popcornmix -Signed-off-by: Noralf Trønnes - -bcm2709: Drop platform smp and timer init code - -irq-bcm2836 handles this through these functions: -bcm2835_init_local_timer_frequency() -bcm2836_arm_irqchip_smp_init() - -Signed-off-by: Noralf Trønnes - -bcm270x: Use watchdog for reboot/poweroff - -The watchdog driver already has support for reboot/poweroff. -Make use of this and remove the code from the platform files. - -Signed-off-by: Noralf Trønnes ---- - arch/arm/mach-bcm/Kconfig | 1 + - arch/arm/mach-bcm/board_bcm2835.c | 17 +++++++++++++++++ - arch/arm/mm/proc-v6.S | 15 ++++++++++++--- - drivers/irqchip/irq-bcm2835.c | 7 ++++++- - drivers/mailbox/bcm2835-mailbox.c | 18 ++++++++++++++++-- - 5 files changed, 52 insertions(+), 6 deletions(-) - ---- a/arch/arm/mach-bcm/Kconfig -+++ b/arch/arm/mach-bcm/Kconfig -@@ -155,6 +155,7 @@ config ARCH_BCM2835 - select FIQ - select PINCTRL - select PINCTRL_BCM2835 -+ select MFD_SYSCON if ARCH_MULTI_V7 - help - This enables support for the Broadcom BCM2835 and BCM2836 SoCs. - This SoC is used in the Raspberry Pi and Roku 2 devices. ---- a/arch/arm/mach-bcm/board_bcm2835.c -+++ b/arch/arm/mach-bcm/board_bcm2835.c -@@ -16,17 +16,21 @@ - #include - #include - #include -+#include - #include - - #include - #include - -+#include -+ - static void __init bcm2835_init(void) - { - struct device_node *np = of_find_node_by_path("/system"); - u32 val; - u64 val64; - -+ vc_cma_early_init(); - bcm2835_init_clocks(); - - if (!of_property_read_u32(np, "linux,revision", &val)) -@@ -35,6 +39,17 @@ static void __init bcm2835_init(void) - system_serial_low = val64; - } - -+static void __init bcm2835_init_early(void) -+{ -+ /* dwc_otg needs this for bounce buffers on non-aligned transfers */ -+ init_dma_coherent_pool_size(SZ_1M); -+} -+ -+static void __init bcm2835_board_reserve(void) -+{ -+ vc_cma_reserve(); -+} -+ - static const char * const bcm2835_compat[] = { - #ifdef CONFIG_ARCH_MULTI_V6 - "brcm,bcm2835", -@@ -47,5 +62,7 @@ static const char * const bcm2835_compat - - DT_MACHINE_START(BCM2835, "BCM2835") - .init_machine = bcm2835_init, -+ .reserve = bcm2835_board_reserve, -+ .init_early = bcm2835_init_early, - .dt_compat = bcm2835_compat - MACHINE_END ---- a/arch/arm/mm/proc-v6.S -+++ b/arch/arm/mm/proc-v6.S -@@ -73,10 +73,19 @@ ENDPROC(cpu_v6_reset) - * - * IRQs are already disabled. - */ -+ -+/* See jira SW-5991 for details of this workaround */ - ENTRY(cpu_v6_do_idle) -- mov r1, #0 -- mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode -- mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt -+ .align 5 -+ mov r1, #2 -+1: subs r1, #1 -+ nop -+ mcreq p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode -+ mcreq p15, 0, r1, c7, c0, 4 @ wait for interrupt -+ nop -+ nop -+ nop -+ bne 1b - ret lr - - ENTRY(cpu_v6_dcache_clean_area) ---- a/drivers/irqchip/irq-bcm2835.c -+++ b/drivers/irqchip/irq-bcm2835.c -@@ -54,7 +54,9 @@ - #include - - #include -+#ifndef CONFIG_ARM64 - #include -+#endif - - /* Put the bank and irq (32 bits) into the hwirq */ - #define MAKE_HWIRQ(b, n) (((b) << 5) | (n)) -@@ -82,6 +84,7 @@ - #define NR_BANKS 3 - #define IRQS_PER_BANK 32 - #define NUMBER_IRQS MAKE_HWIRQ(NR_BANKS, 0) -+#undef FIQ_START - #define FIQ_START (NR_IRQS_BANK0 + MAKE_HWIRQ(NR_BANKS - 1, 0)) - - static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 }; -@@ -256,10 +259,12 @@ static int __init armctrl_of_init(struct - MAKE_HWIRQ(b, i) + NUMBER_IRQS); - BUG_ON(irq <= 0); - irq_set_chip(irq, &armctrl_chip); -- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); -+ irq_set_probe(irq); - } - } -+#ifndef CONFIG_ARM64 - init_FIQ(FIQ_START); -+#endif - - return 0; - } ---- a/drivers/mailbox/bcm2835-mailbox.c -+++ b/drivers/mailbox/bcm2835-mailbox.c -@@ -51,12 +51,15 @@ - #define MAIL1_WRT (ARM_0_MAIL1 + 0x00) - #define MAIL1_STA (ARM_0_MAIL1 + 0x18) - -+/* On ARCH_BCM270x these come through (arm_control.h ) */ -+#ifndef ARM_MS_FULL - /* Status register: FIFO state. */ - #define ARM_MS_FULL BIT(31) - #define ARM_MS_EMPTY BIT(30) - - /* Configuration register: Enable interrupts. */ - #define ARM_MC_IHAVEDATAIRQEN BIT(0) -+#endif - - struct bcm2835_mbox { - void __iomem *regs; -@@ -151,7 +154,7 @@ static int bcm2835_mbox_probe(struct pla - return -ENOMEM; - spin_lock_init(&mbox->lock); - -- ret = devm_request_irq(dev, irq_of_parse_and_map(dev->of_node, 0), -+ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), - bcm2835_mbox_irq, 0, dev_name(dev), mbox); - if (ret) { - dev_err(dev, "Failed to register a mailbox IRQ handler: %d\n", -@@ -209,7 +212,18 @@ static struct platform_driver bcm2835_mb - .probe = bcm2835_mbox_probe, - .remove = bcm2835_mbox_remove, - }; --module_platform_driver(bcm2835_mbox_driver); -+ -+static int __init bcm2835_mbox_init(void) -+{ -+ return platform_driver_register(&bcm2835_mbox_driver); -+} -+arch_initcall(bcm2835_mbox_init); -+ -+static void __init bcm2835_mbox_exit(void) -+{ -+ platform_driver_unregister(&bcm2835_mbox_driver); -+} -+module_exit(bcm2835_mbox_exit); - - MODULE_AUTHOR("Lubomir Rintel "); - MODULE_DESCRIPTION("BCM2835 mailbox IPC driver"); diff --git a/target/linux/brcm2708/patches-4.9/0031-Add-dwc_otg-driver.patch b/target/linux/brcm2708/patches-4.9/0031-Add-dwc_otg-driver.patch deleted file mode 100644 index 0610d038b6b4..000000000000 --- a/target/linux/brcm2708/patches-4.9/0031-Add-dwc_otg-driver.patch +++ /dev/null @@ -1,60858 +0,0 @@ -From 65f57e56fcf9d40383718f0bcd9e6f95a34ca1aa Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Wed, 1 May 2013 19:46:17 +0100 -Subject: [PATCH] Add dwc_otg driver -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: popcornmix - -usb: dwc: fix lockdep false positive - -Signed-off-by: Kari Suvanto - -usb: dwc: fix inconsistent lock state - -Signed-off-by: Kari Suvanto - -Add FIQ patch to dwc_otg driver. Enable with dwc_otg.fiq_fix_enable=1. Should give about 10% more ARM performance. -Thanks to Gordon and Costas - -Avoid dynamic memory allocation for channel lock in USB driver. Thanks ddv2005. - -Add NAK holdoff scheme. Enabled by default, disable with dwc_otg.nak_holdoff_enable=0. Thanks gsh - -Make sure we wait for the reset to finish - -dwc_otg: fix bug in dwc_otg_hcd.c resulting in silent kernel - memory corruption, escalating to OOPS under high USB load. - -dwc_otg: Fix unsafe access of QTD during URB enqueue - -In dwc_otg_hcd_urb_enqueue during qtd creation, it was possible that the -transaction could complete almost immediately after the qtd was assigned -to a host channel during URB enqueue, which meant the qtd pointer was no -longer valid having been completed and removed. Usually, this resulted in -an OOPS during URB submission. By predetermining whether transactions -need to be queued or not, this unsafe pointer access is avoided. - -This bug was only evident on the Pi model A where a device was attached -that had no periodic endpoints (e.g. USB pendrive or some wlan devices). - -dwc_otg: Fix incorrect URB allocation error handling - -If the memory allocation for a dwc_otg_urb failed, the kernel would OOPS -because for some reason a member of the *unallocated* struct was set to -zero. Error handling changed to fail correctly. - -dwc_otg: fix potential use-after-free case in interrupt handler - -If a transaction had previously aborted, certain interrupts are -enabled to track error counts and reset where necessary. On IN -endpoints the host generates an ACK interrupt near-simultaneously -with completion of transfer. In the case where this transfer had -previously had an error, this results in a use-after-free on -the QTD memory space with a 1-byte length being overwritten to -0x00. - -dwc_otg: add handling of SPLIT transaction data toggle errors - -Previously a data toggle error on packets from a USB1.1 device behind -a TT would result in the Pi locking up as the driver never handled -the associated interrupt. Patch adds basic retry mechanism and -interrupt acknowledgement to cater for either a chance toggle error or -for devices that have a broken initial toggle state (FT8U232/FT232BM). - -dwc_otg: implement tasklet for returning URBs to usbcore hcd layer - -The dwc_otg driver interrupt handler for transfer completion will spend -a very long time with interrupts disabled when a URB is completed - -this is because usb_hcd_giveback_urb is called from within the handler -which for a USB device driver with complicated processing (e.g. webcam) -will take an exorbitant amount of time to complete. This results in -missed completion interrupts for other USB packets which lead to them -being dropped due to microframe overruns. - -This patch splits returning the URB to the usb hcd layer into a -high-priority tasklet. This will have most benefit for isochronous IN -transfers but will also have incidental benefit where multiple periodic -devices are active at once. - -dwc_otg: fix NAK holdoff and allow on split transactions only - -This corrects a bug where if a single active non-periodic endpoint -had at least one transaction in its qh, on frnum == MAX_FRNUM the qh -would get skipped and never get queued again. This would result in -a silent device until error detection (automatic or otherwise) would -either reset the device or flush and requeue the URBs. - -Additionally the NAK holdoff was enabled for all transactions - this -would potentially stall a HS endpoint for 1ms if a previous error state -enabled this interrupt and the next response was a NAK. Fix so that -only split transactions get held off. - -dwc_otg: Call usb_hcd_unlink_urb_from_ep with lock held in completion handler - -usb_hcd_unlink_urb_from_ep must be called with the HCD lock held. Calling it -asynchronously in the tasklet was not safe (regression in -c4564d4a1a0a9b10d4419e48239f5d99e88d2667). - -This change unlinks it from the endpoint prior to queueing it for handling in -the tasklet, and also adds a check to ensure the urb is OK to be unlinked -before doing so. - -NULL pointer dereference kernel oopses had been observed in usb_hcd_giveback_urb -when a USB device was unplugged/replugged during data transfer. This effect -was reproduced using automated USB port power control, hundreds of replug -events were performed during active transfers to confirm that the problem was -eliminated. - -USB fix using a FIQ to implement split transactions - -This commit adds a FIQ implementaion that schedules -the split transactions using a FIQ so we don't get -held off by the interrupt latency of Linux - -dwc_otg: fix device attributes and avoid kernel warnings on boot - -dcw_otg: avoid logging function that can cause panics - -See: https://github.com/raspberrypi/firmware/issues/21 -Thanks to cleverca22 for fix - -dwc_otg: mask correct interrupts after transaction error recovery - -The dwc_otg driver will unmask certain interrupts on a transaction -that previously halted in the error state in order to reset the -QTD error count. The various fine-grained interrupt handlers do not -consider that other interrupts besides themselves were unmasked. - -By disabling the two other interrupts only ever enabled in DMA mode -for this purpose, we can avoid unnecessary function calls in the -IRQ handler. This will also prevent an unneccesary FIQ interrupt -from being generated if the FIQ is enabled. - -dwc_otg: fiq: prevent FIQ thrash and incorrect state passing to IRQ - -In the case of a transaction to a device that had previously aborted -due to an error, several interrupts are enabled to reset the error -count when a device responds. This has the side-effect of making the -FIQ thrash because the hardware will generate multiple instances of -a NAK on an IN bulk/interrupt endpoint and multiple instances of ACK -on an OUT bulk/interrupt endpoint. Make the FIQ mask and clear the -associated interrupts. - -Additionally, on non-split transactions make sure that only unmasked -interrupts are cleared. This caused a hard-to-trigger but serious -race condition when you had the combination of an endpoint awaiting -error recovery and a transaction completed on an endpoint - due to -the sequencing and timing of interrupts generated by the dwc_otg core, -it was possible to confuse the IRQ handler. - -Fix function tracing - -dwc_otg: whitespace cleanup in dwc_otg_urb_enqueue - -dwc_otg: prevent OOPSes during device disconnects - -The dwc_otg_urb_enqueue function is thread-unsafe. In particular the -access of urb->hcpriv, usb_hcd_link_urb_to_ep, dwc_otg_urb->qtd and -friends does not occur within a critical section and so if a device -was unplugged during activity there was a high chance that the -usbcore hub_thread would try to disable the endpoint with partially- -formed entries in the URB queue. This would result in BUG() or null -pointer dereferences. - -Fix so that access of urb->hcpriv, enqueuing to the hardware and -adding to usbcore endpoint URB lists is contained within a single -critical section. - -dwc_otg: prevent BUG() in TT allocation if hub address is > 16 - -A fixed-size array is used to track TT allocation. This was -previously set to 16 which caused a crash because -dwc_otg_hcd_allocate_port would read past the end of the array. - -This was hit if a hub was plugged in which enumerated as addr > 16, -due to previous device resets or unplugs. - -Also add #ifdef FIQ_DEBUG around hcd->hub_port_alloc[], which grows -to a large size if 128 hub addresses are supported. This field is -for debug only for tracking which frame an allocate happened in. - -dwc_otg: make channel halts with unknown state less damaging - -If the IRQ received a channel halt interrupt through the FIQ -with no other bits set, the IRQ would not release the host -channel and never complete the URB. - -Add catchall handling to treat as a transaction error and retry. - -dwc_otg: fiq_split: use TTs with more granularity - -This fixes certain issues with split transaction scheduling. - -- Isochronous multi-packet OUT transactions now hog the TT until - they are completed - this prevents hubs aborting transactions - if they get a periodic start-split out-of-order -- Don't perform TT allocation on non-periodic endpoints - this - allows simultaneous use of the TT's bulk/control and periodic - transaction buffers - -This commit will mainly affect USB audio playback. - -dwc_otg: fix potential sleep while atomic during urb enqueue - -Fixes a regression introduced with eb1b482a. Kmalloc called from -dwc_otg_hcd_qtd_add / dwc_otg_hcd_qtd_create did not always have -the GPF_ATOMIC flag set. Force this flag when inside the larger -critical section. - -dwc_otg: make fiq_split_enable imply fiq_fix_enable - -Failing to set up the FIQ correctly would result in -"IRQ 32: nobody cared" errors in dmesg. - -dwc_otg: prevent crashes on host port disconnects - -Fix several issues resulting in crashes or inconsistent state -if a Model A root port was disconnected. - -- Clean up queue heads properly in kill_urbs_in_qh_list by - removing the empty QHs from the schedule lists -- Set the halt status properly to prevent IRQ handlers from - using freed memory -- Add fiq_split related cleanup for saved registers -- Make microframe scheduling reclaim host channels if - active during a disconnect -- Abort URBs with -ESHUTDOWN status response, informing - device drivers so they respond in a more correct fashion - and don't try to resubmit URBs -- Prevent IRQ handlers from attempting to handle channel - interrupts if the associated URB was dequeued (and the - driver state was cleared) - -dwc_otg: prevent leaking URBs during enqueue - -A dwc_otg_urb would get leaked if the HCD enqueue function -failed for any reason. Free the URB at the appropriate points. - -dwc_otg: Enable NAK holdoff for control split transactions - -Certain low-speed devices take a very long time to complete a -data or status stage of a control transaction, producing NAK -responses until they complete internal processing - the USB2.0 -spec limit is up to 500mS. This causes the same type of interrupt -storm as seen with USB-serial dongles prior to c8edb238. - -In certain circumstances, usually while booting, this interrupt -storm could cause SD card timeouts. - -dwc_otg: Fix for occasional lockup on boot when doing a USB reset - -dwc_otg: Don't issue traffic to LS devices in FS mode - -Issuing low-speed packets when the root port is in full-speed mode -causes the root port to stop responding. Explicitly fail when -enqueuing URBs to a LS endpoint on a FS bus. - -Fix ARM architecture issue with local_irq_restore() - -If local_fiq_enable() is called before a local_irq_restore(flags) where -the flags variable has the F bit set, the FIQ will be erroneously disabled. - -Fixup arch_local_irq_restore to avoid trampling the F bit in CPSR. - -Also fix some of the hacks previously implemented for previous dwc_otg -incarnations. - -dwc_otg: fiq_fsm: Base commit for driver rewrite - -This commit removes the previous FIQ fixes entirely and adds fiq_fsm. - -This rewrite features much more complete support for split transactions -and takes into account several OTG hardware bugs. High-speed -isochronous transactions are also capable of being performed by fiq_fsm. - -All driver options have been removed and replaced with: - - dwc_otg.fiq_enable (bool) - - dwc_otg.fiq_fsm_enable (bool) - - dwc_otg.fiq_fsm_mask (bitmask) - - dwc_otg.nak_holdoff (unsigned int) - -Defaults are specified such that fiq_fsm behaves similarly to the -previously implemented FIQ fixes. - -fiq_fsm: Push error recovery into the FIQ when fiq_fsm is used - -If the transfer associated with a QTD failed due to a bus error, the HCD -would retry the transfer up to 3 times (implementing the USB2.0 -three-strikes retry in software). - -Due to the masking mechanism used by fiq_fsm, it is only possible to pass -a single interrupt through to the HCD per-transfer. - -In this instance host channels would fall off the radar because the error -reset would function, but the subsequent channel halt would be lost. - -Push the error count reset into the FIQ handler. - -fiq_fsm: Implement timeout mechanism - -For full-speed endpoints with a large packet size, interrupt latency -runs the risk of the FIQ starting a transaction too late in a full-speed -frame. If the device is still transmitting data when EOF2 for the -downstream frame occurs, the hub will disable the port. This change is -not reflected in the hub status endpoint and the device becomes -unresponsive. - -Prevent high-bandwidth transactions from being started too late in a -frame. The mechanism is not guaranteed: a combination of bit stuffing -and hub latency may still result in a device overrunning. - -fiq_fsm: fix bounce buffer utilisation for Isochronous OUT - -Multi-packet isochronous OUT transactions were subject to a few bounday -bugs. Fix them. - -Audio playback is now much more robust: however, an issue stands with -devices that have adaptive sinks - ALSA plays samples too fast. - -dwc_otg: Return full-speed frame numbers in HS mode - -The frame counter increments on every *microframe* in high-speed mode. -Most device drivers expect this number to be in full-speed frames - this -caused considerable confusion to e.g. snd_usb_audio which uses the -frame counter to estimate the number of samples played. - -fiq_fsm: save PID on completion of interrupt OUT transfers - -Also add edge case handling for interrupt transports. - -Note that for periodic split IN, data toggles are unimplemented in the -OTG host hardware - it unconditionally accepts any PID. - -fiq_fsm: add missing case for fiq_fsm_tt_in_use() - -Certain combinations of bitrate and endpoint activity could -result in a periodic transaction erroneously getting started -while the previous Isochronous OUT was still active. - -fiq_fsm: clear hcintmsk for aborted transactions - -Prevents the FIQ from erroneously handling interrupts -on a timed out channel. - -fiq_fsm: enable by default - -fiq_fsm: fix dequeues for non-periodic split transactions - -If a dequeue happened between the SSPLIT and CSPLIT phases of the -transaction, the HCD would never receive an interrupt. - -fiq_fsm: Disable by default - -fiq_fsm: Handle HC babble errors - -The HCTSIZ transfer size field raises a babble interrupt if -the counter wraps. Handle the resulting interrupt in this case. - -dwc_otg: fix interrupt registration for fiq_enable=0 - -Additionally make the module parameter conditional for wherever -hcd->fiq_state is touched. - -fiq_fsm: Enable by default - -dwc_otg: Fix various issues with root port and transaction errors - -Process the host port interrupts correctly (and don't trample them). -Root port hotplug now functional again. - -Fix a few thinkos with the transaction error passthrough for fiq_fsm. - -fiq_fsm: Implement hack for Split Interrupt transactions - -Hubs aren't too picky about which endpoint we send Control type split -transactions to. By treating Interrupt transfers as Control, it is -possible to use the non-periodic queue in the OTG core as well as the -non-periodic FIFOs in the hub itself. This massively reduces the -microframe exclusivity/contention that periodic split transactions -otherwise have to enforce. - -It goes without saying that this is a fairly egregious USB specification -violation, but it works. - -Original idea by Hans Petter Selasky @ FreeBSD.org. - -dwc_otg: FIQ support on SMP. Set up FIQ stack and handler on Core 0 only. - -dwc_otg: introduce fiq_fsm_spin(un|)lock() - -SMP safety for the FIQ relies on register read-modify write cycles being -completed in the correct order. Several places in the DWC code modify -registers also touched by the FIQ. Protect these by a bare-bones lock -mechanism. - -This also makes it possible to run the FIQ and IRQ handlers on different -cores. - -fiq_fsm: fix build on bcm2708 and bcm2709 platforms - -dwc_otg: put some barriers back where they should be for UP - -bcm2709/dwc_otg: Setup FIQ on core 1 if >1 core active - -dwc_otg: fixup read-modify-write in critical paths - -Be more careful about read-modify-write on registers that the FIQ -also touches. - -Guard fiq_fsm_spin_lock with fiq_enable check - -fiq_fsm: Falling out of the state machine isn't fatal - -This edge case can be hit if the port is disabled while the FIQ is -in the middle of a transaction. Make the effects less severe. - -Also get rid of the useless return value. - -squash: dwc_otg: Allow to build without SMP - -usb: core: make overcurrent messages more prominent - -Hub overcurrent messages are more serious than "debug". Increase loglevel. - -usb: dwc_otg: Don't use dma_to_virt() - -Commit 6ce0d20 changes dma_to_virt() which breaks this driver. -Open code the old dma_to_virt() implementation to work around this. - -Limit the use of __bus_to_virt() to cases where transfer_buffer_length -is set and transfer_buffer is not set. This is done to increase the -chance that this driver will also work on ARCH_BCM2835. - -transfer_buffer should not be NULL if the length is set, but the -comment in the code indicates that there are situations where this -might happen. drivers/usb/isp1760/isp1760-hcd.c also has a similar -comment pointing to a possible: 'usb storage / SCSI bug'. - -Signed-off-by: Noralf Trønnes - -dwc_otg: Fix crash when fiq_enable=0 - -dwc_otg: fiq_fsm: Make high-speed isochronous strided transfers work properly - -Certain low-bandwidth high-speed USB devices (specialist audio devices, -compressed-frame webcams) have packet intervals > 1 microframe. - -Stride these transfers in the FIQ by using the start-of-frame interrupt -to restart the channel at the right time. - -dwc_otg: Force host mode to fix incorrect compute module boards - -dwc_otg: Add ARCH_BCM2835 support - -Signed-off-by: Noralf Trønnes - -dwc_otg: Simplify FIQ irq number code - -Dropping ATAGS means we can simplify the FIQ irq number code. -Also add error checking on the returned irq number. - -Signed-off-by: Noralf Trønnes - -dwc_otg: Remove duplicate gadget probe/unregister function - -dwc_otg: Properly set the HFIR - -Douglas Anderson reported: - -According to the most up to date version of the dwc2 databook, the FRINT -field of the HFIR register should be programmed to: -* 125 us * (PHY clock freq for HS) - 1 -* 1000 us * (PHY clock freq for FS/LS) - 1 - -This is opposed to older versions of the doc that claimed it should be: -* 125 us * (PHY clock freq for HS) -* 1000 us * (PHY clock freq for FS/LS) - -and reported lower timing jitter on a USB analyser - -dcw_otg: trim xfer length when buffer larger than allocated size is received - -dwc_otg: Don't free qh align buffers in atomic context - -dwc_otg: Enable the hack for Split Interrupt transactions by default - -dwc_otg.fiq_fsm_mask=0xF has long been a suggestion for users with audio stutters or other USB bandwidth issues. -So far we are aware of many success stories but no failure caused by this setting. -Make it a default to learn more. - -See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=70437 - -Signed-off-by: popcornmix - -dwc_otg: Use kzalloc when suitable - -dwc_otg: Pass struct device to dma_alloc*() - -This makes it possible to get the bus address from Device Tree. - -Signed-off-by: Noralf Trønnes ---- - arch/arm/include/asm/irqflags.h | 16 +- - arch/arm/kernel/fiqasm.S | 4 + - drivers/usb/Makefile | 1 + - drivers/usb/core/generic.c | 1 + - drivers/usb/core/hub.c | 2 +- - drivers/usb/core/message.c | 79 + - drivers/usb/core/otg_whitelist.h | 114 +- - drivers/usb/gadget/file_storage.c | 3676 ++++++++++ - drivers/usb/host/Kconfig | 13 + - drivers/usb/host/Makefile | 2 + - drivers/usb/host/dwc_common_port/Makefile | 58 + - drivers/usb/host/dwc_common_port/Makefile.fbsd | 17 + - drivers/usb/host/dwc_common_port/Makefile.linux | 49 + - drivers/usb/host/dwc_common_port/changes.txt | 174 + - drivers/usb/host/dwc_common_port/doc/doxygen.cfg | 270 + - drivers/usb/host/dwc_common_port/dwc_cc.c | 532 ++ - drivers/usb/host/dwc_common_port/dwc_cc.h | 224 + - drivers/usb/host/dwc_common_port/dwc_common_fbsd.c | 1308 ++++ - .../usb/host/dwc_common_port/dwc_common_linux.c | 1418 ++++ - drivers/usb/host/dwc_common_port/dwc_common_nbsd.c | 1275 ++++ - drivers/usb/host/dwc_common_port/dwc_crypto.c | 308 + - drivers/usb/host/dwc_common_port/dwc_crypto.h | 111 + - drivers/usb/host/dwc_common_port/dwc_dh.c | 291 + - drivers/usb/host/dwc_common_port/dwc_dh.h | 106 + - drivers/usb/host/dwc_common_port/dwc_list.h | 594 ++ - drivers/usb/host/dwc_common_port/dwc_mem.c | 245 + - drivers/usb/host/dwc_common_port/dwc_modpow.c | 636 ++ - drivers/usb/host/dwc_common_port/dwc_modpow.h | 34 + - drivers/usb/host/dwc_common_port/dwc_notifier.c | 319 + - drivers/usb/host/dwc_common_port/dwc_notifier.h | 122 + - drivers/usb/host/dwc_common_port/dwc_os.h | 1276 ++++ - drivers/usb/host/dwc_common_port/usb.h | 946 +++ - drivers/usb/host/dwc_otg/Makefile | 82 + - drivers/usb/host/dwc_otg/doc/doxygen.cfg | 224 + - drivers/usb/host/dwc_otg/dummy_audio.c | 1574 +++++ - drivers/usb/host/dwc_otg/dwc_cfi_common.h | 142 + - drivers/usb/host/dwc_otg/dwc_otg_adp.c | 854 +++ - drivers/usb/host/dwc_otg/dwc_otg_adp.h | 80 + - drivers/usb/host/dwc_otg/dwc_otg_attr.c | 1210 ++++ - drivers/usb/host/dwc_otg/dwc_otg_attr.h | 89 + - drivers/usb/host/dwc_otg/dwc_otg_cfi.c | 1876 +++++ - drivers/usb/host/dwc_otg/dwc_otg_cfi.h | 320 + - drivers/usb/host/dwc_otg/dwc_otg_cil.c | 7141 ++++++++++++++++++++ - drivers/usb/host/dwc_otg/dwc_otg_cil.h | 1464 ++++ - drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c | 1594 +++++ - drivers/usb/host/dwc_otg/dwc_otg_core_if.h | 705 ++ - drivers/usb/host/dwc_otg/dwc_otg_dbg.h | 117 + - drivers/usb/host/dwc_otg/dwc_otg_driver.c | 1757 +++++ - drivers/usb/host/dwc_otg/dwc_otg_driver.h | 86 + - drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 1355 ++++ - drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h | 370 + - drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S | 80 + - drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 4260 ++++++++++++ - drivers/usb/host/dwc_otg/dwc_otg_hcd.h | 868 +++ - drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c | 1139 ++++ - drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h | 417 ++ - drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c | 2727 ++++++++ - drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 1005 +++ - drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c | 963 +++ - drivers/usb/host/dwc_otg/dwc_otg_os_dep.h | 188 + - drivers/usb/host/dwc_otg/dwc_otg_pcd.c | 2725 ++++++++ - drivers/usb/host/dwc_otg/dwc_otg_pcd.h | 273 + - drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h | 361 + - drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c | 5148 ++++++++++++++ - drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c | 1280 ++++ - drivers/usb/host/dwc_otg/dwc_otg_regs.h | 2550 +++++++ - drivers/usb/host/dwc_otg/test/Makefile | 16 + - drivers/usb/host/dwc_otg/test/dwc_otg_test.pm | 337 + - drivers/usb/host/dwc_otg/test/test_mod_param.pl | 133 + - drivers/usb/host/dwc_otg/test/test_sysfs.pl | 193 + - 70 files changed, 59908 insertions(+), 16 deletions(-) - create mode 100644 drivers/usb/gadget/file_storage.c - create mode 100644 drivers/usb/host/dwc_common_port/Makefile - create mode 100644 drivers/usb/host/dwc_common_port/Makefile.fbsd - create mode 100644 drivers/usb/host/dwc_common_port/Makefile.linux - create mode 100644 drivers/usb/host/dwc_common_port/changes.txt - create mode 100644 drivers/usb/host/dwc_common_port/doc/doxygen.cfg - create mode 100644 drivers/usb/host/dwc_common_port/dwc_cc.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_cc.h - create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_fbsd.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_linux.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_nbsd.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_crypto.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_crypto.h - create mode 100644 drivers/usb/host/dwc_common_port/dwc_dh.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_dh.h - create mode 100644 drivers/usb/host/dwc_common_port/dwc_list.h - create mode 100644 drivers/usb/host/dwc_common_port/dwc_mem.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_modpow.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_modpow.h - create mode 100644 drivers/usb/host/dwc_common_port/dwc_notifier.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_notifier.h - create mode 100644 drivers/usb/host/dwc_common_port/dwc_os.h - create mode 100644 drivers/usb/host/dwc_common_port/usb.h - create mode 100644 drivers/usb/host/dwc_otg/Makefile - create mode 100644 drivers/usb/host/dwc_otg/doc/doxygen.cfg - create mode 100644 drivers/usb/host/dwc_otg/dummy_audio.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_cfi_common.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_adp.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_adp.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_attr.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_attr.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cfi.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cfi.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_core_if.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_dbg.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_driver.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_driver.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_os_dep.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_regs.h - create mode 100644 drivers/usb/host/dwc_otg/test/Makefile - create mode 100644 drivers/usb/host/dwc_otg/test/dwc_otg_test.pm - create mode 100644 drivers/usb/host/dwc_otg/test/test_mod_param.pl - create mode 100644 drivers/usb/host/dwc_otg/test/test_sysfs.pl - ---- a/arch/arm/include/asm/irqflags.h -+++ b/arch/arm/include/asm/irqflags.h -@@ -162,13 +162,23 @@ static inline unsigned long arch_local_s - } - - /* -- * restore saved IRQ & FIQ state -+ * restore saved IRQ state - */ - #define arch_local_irq_restore arch_local_irq_restore - static inline void arch_local_irq_restore(unsigned long flags) - { -- asm volatile( -- " msr " IRQMASK_REG_NAME_W ", %0 @ local_irq_restore" -+ unsigned long temp = 0; -+ flags &= ~(1 << 6); -+ asm volatile ( -+ " mrs %0, cpsr" -+ : "=r" (temp) -+ : -+ : "memory", "cc"); -+ /* Preserve FIQ bit */ -+ temp &= (1 << 6); -+ flags = flags | temp; -+ asm volatile ( -+ " msr cpsr_c, %0 @ local_irq_restore" - : - : "r" (flags) - : "memory", "cc"); ---- a/arch/arm/kernel/fiqasm.S -+++ b/arch/arm/kernel/fiqasm.S -@@ -47,3 +47,7 @@ ENTRY(__get_fiq_regs) - mov r0, r0 @ avoid hazard prior to ARMv4 - ret lr - ENDPROC(__get_fiq_regs) -+ -+ENTRY(__FIQ_Branch) -+ mov pc, r8 -+ENDPROC(__FIQ_Branch) ---- a/drivers/usb/Makefile -+++ b/drivers/usb/Makefile -@@ -7,6 +7,7 @@ - obj-$(CONFIG_USB) += core/ - obj-$(CONFIG_USB_SUPPORT) += phy/ - -+obj-$(CONFIG_USB_DWCOTG) += host/ - obj-$(CONFIG_USB_DWC3) += dwc3/ - obj-$(CONFIG_USB_DWC2) += dwc2/ - obj-$(CONFIG_USB_ISP1760) += isp1760/ ---- a/drivers/usb/core/generic.c -+++ b/drivers/usb/core/generic.c -@@ -152,6 +152,7 @@ int usb_choose_configuration(struct usb_ - dev_warn(&udev->dev, - "no configuration chosen from %d choice%s\n", - num_configs, plural(num_configs)); -+ dev_warn(&udev->dev, "No support over %dmA\n", udev->bus_mA); - } - return i; - } ---- a/drivers/usb/core/hub.c -+++ b/drivers/usb/core/hub.c -@@ -5009,7 +5009,7 @@ static void port_event(struct usb_hub *h - if (portchange & USB_PORT_STAT_C_OVERCURRENT) { - u16 status = 0, unused; - -- dev_dbg(&port_dev->dev, "over-current change\n"); -+ dev_notice(&port_dev->dev, "over-current change\n"); - usb_clear_port_feature(hdev, port1, - USB_PORT_FEAT_C_OVER_CURRENT); - msleep(100); /* Cool down */ ---- a/drivers/usb/core/message.c -+++ b/drivers/usb/core/message.c -@@ -1908,6 +1908,85 @@ free_interfaces: - if (cp->string == NULL && - !(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS)) - cp->string = usb_cache_string(dev, cp->desc.iConfiguration); -+/* Uncomment this define to enable the HS Electrical Test support */ -+#define DWC_HS_ELECT_TST 1 -+#ifdef DWC_HS_ELECT_TST -+ /* Here we implement the HS Electrical Test support. The -+ * tester uses a vendor ID of 0x1A0A to indicate we should -+ * run a special test sequence. The product ID tells us -+ * which sequence to run. We invoke the test sequence by -+ * sending a non-standard SetFeature command to our root -+ * hub port. Our dwc_otg_hcd_hub_control() routine will -+ * recognize the command and perform the desired test -+ * sequence. -+ */ -+ if (dev->descriptor.idVendor == 0x1A0A) { -+ /* HSOTG Electrical Test */ -+ dev_warn(&dev->dev, "VID from HSOTG Electrical Test Fixture\n"); -+ -+ if (dev->bus && dev->bus->root_hub) { -+ struct usb_device *hdev = dev->bus->root_hub; -+ dev_warn(&dev->dev, "Got PID 0x%x\n", dev->descriptor.idProduct); -+ -+ switch (dev->descriptor.idProduct) { -+ case 0x0101: /* TEST_SE0_NAK */ -+ dev_warn(&dev->dev, "TEST_SE0_NAK\n"); -+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), -+ USB_REQ_SET_FEATURE, USB_RT_PORT, -+ USB_PORT_FEAT_TEST, 0x300, NULL, 0, HZ); -+ break; -+ -+ case 0x0102: /* TEST_J */ -+ dev_warn(&dev->dev, "TEST_J\n"); -+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), -+ USB_REQ_SET_FEATURE, USB_RT_PORT, -+ USB_PORT_FEAT_TEST, 0x100, NULL, 0, HZ); -+ break; -+ -+ case 0x0103: /* TEST_K */ -+ dev_warn(&dev->dev, "TEST_K\n"); -+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), -+ USB_REQ_SET_FEATURE, USB_RT_PORT, -+ USB_PORT_FEAT_TEST, 0x200, NULL, 0, HZ); -+ break; -+ -+ case 0x0104: /* TEST_PACKET */ -+ dev_warn(&dev->dev, "TEST_PACKET\n"); -+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), -+ USB_REQ_SET_FEATURE, USB_RT_PORT, -+ USB_PORT_FEAT_TEST, 0x400, NULL, 0, HZ); -+ break; -+ -+ case 0x0105: /* TEST_FORCE_ENABLE */ -+ dev_warn(&dev->dev, "TEST_FORCE_ENABLE\n"); -+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), -+ USB_REQ_SET_FEATURE, USB_RT_PORT, -+ USB_PORT_FEAT_TEST, 0x500, NULL, 0, HZ); -+ break; -+ -+ case 0x0106: /* HS_HOST_PORT_SUSPEND_RESUME */ -+ dev_warn(&dev->dev, "HS_HOST_PORT_SUSPEND_RESUME\n"); -+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), -+ USB_REQ_SET_FEATURE, USB_RT_PORT, -+ USB_PORT_FEAT_TEST, 0x600, NULL, 0, 40 * HZ); -+ break; -+ -+ case 0x0107: /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ -+ dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup\n"); -+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), -+ USB_REQ_SET_FEATURE, USB_RT_PORT, -+ USB_PORT_FEAT_TEST, 0x700, NULL, 0, 40 * HZ); -+ break; -+ -+ case 0x0108: /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ -+ dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute\n"); -+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), -+ USB_REQ_SET_FEATURE, USB_RT_PORT, -+ USB_PORT_FEAT_TEST, 0x800, NULL, 0, 40 * HZ); -+ } -+ } -+ } -+#endif /* DWC_HS_ELECT_TST */ - - /* Now that the interfaces are installed, re-enable LPM. */ - usb_unlocked_enable_lpm(dev); ---- a/drivers/usb/core/otg_whitelist.h -+++ b/drivers/usb/core/otg_whitelist.h -@@ -19,33 +19,82 @@ - static struct usb_device_id whitelist_table[] = { - - /* hubs are optional in OTG, but very handy ... */ -+#define CERT_WITHOUT_HUBS -+#if defined(CERT_WITHOUT_HUBS) -+{ USB_DEVICE( 0x0000, 0x0000 ), }, /* Root HUB Only*/ -+#else - { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), }, - { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 1), }, -+{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 2), }, -+#endif - - #ifdef CONFIG_USB_PRINTER /* ignoring nonstatic linkage! */ - /* FIXME actually, printers are NOT supposed to use device classes; - * they're supposed to use interface classes... - */ --{ USB_DEVICE_INFO(7, 1, 1) }, --{ USB_DEVICE_INFO(7, 1, 2) }, --{ USB_DEVICE_INFO(7, 1, 3) }, -+//{ USB_DEVICE_INFO(7, 1, 1) }, -+//{ USB_DEVICE_INFO(7, 1, 2) }, -+//{ USB_DEVICE_INFO(7, 1, 3) }, - #endif - - #ifdef CONFIG_USB_NET_CDCETHER - /* Linux-USB CDC Ethernet gadget */ --{ USB_DEVICE(0x0525, 0xa4a1), }, -+//{ USB_DEVICE(0x0525, 0xa4a1), }, - /* Linux-USB CDC Ethernet + RNDIS gadget */ --{ USB_DEVICE(0x0525, 0xa4a2), }, -+//{ USB_DEVICE(0x0525, 0xa4a2), }, - #endif - - #if IS_ENABLED(CONFIG_USB_TEST) - /* gadget zero, for testing */ --{ USB_DEVICE(0x0525, 0xa4a0), }, -+//{ USB_DEVICE(0x0525, 0xa4a0), }, - #endif - -+/* OPT Tester */ -+{ USB_DEVICE( 0x1a0a, 0x0101 ), }, /* TEST_SE0_NAK */ -+{ USB_DEVICE( 0x1a0a, 0x0102 ), }, /* Test_J */ -+{ USB_DEVICE( 0x1a0a, 0x0103 ), }, /* Test_K */ -+{ USB_DEVICE( 0x1a0a, 0x0104 ), }, /* Test_PACKET */ -+{ USB_DEVICE( 0x1a0a, 0x0105 ), }, /* Test_FORCE_ENABLE */ -+{ USB_DEVICE( 0x1a0a, 0x0106 ), }, /* HS_PORT_SUSPEND_RESUME */ -+{ USB_DEVICE( 0x1a0a, 0x0107 ), }, /* SINGLE_STEP_GET_DESCRIPTOR setup */ -+{ USB_DEVICE( 0x1a0a, 0x0108 ), }, /* SINGLE_STEP_GET_DESCRIPTOR execute */ -+ -+/* Sony cameras */ -+{ USB_DEVICE_VER(0x054c,0x0010,0x0410, 0x0500), }, -+ -+/* Memory Devices */ -+//{ USB_DEVICE( 0x0781, 0x5150 ), }, /* SanDisk */ -+//{ USB_DEVICE( 0x05DC, 0x0080 ), }, /* Lexar */ -+//{ USB_DEVICE( 0x4146, 0x9281 ), }, /* IOMEGA */ -+//{ USB_DEVICE( 0x067b, 0x2507 ), }, /* Hammer 20GB External HD */ -+{ USB_DEVICE( 0x0EA0, 0x2168 ), }, /* Ours Technology Inc. (BUFFALO ClipDrive)*/ -+//{ USB_DEVICE( 0x0457, 0x0150 ), }, /* Silicon Integrated Systems Corp. */ -+ -+/* HP Printers */ -+//{ USB_DEVICE( 0x03F0, 0x1102 ), }, /* HP Photosmart 245 */ -+//{ USB_DEVICE( 0x03F0, 0x1302 ), }, /* HP Photosmart 370 Series */ -+ -+/* Speakers */ -+//{ USB_DEVICE( 0x0499, 0x3002 ), }, /* YAMAHA YST-MS35D USB Speakers */ -+//{ USB_DEVICE( 0x0672, 0x1041 ), }, /* Labtec USB Headset */ -+ - { } /* Terminating entry */ - }; - -+static inline void report_errors(struct usb_device *dev) -+{ -+ /* OTG MESSAGE: report errors here, customize to match your product */ -+ dev_info(&dev->dev, "device Vendor:%04x Product:%04x is not supported\n", -+ le16_to_cpu(dev->descriptor.idVendor), -+ le16_to_cpu(dev->descriptor.idProduct)); -+ if (USB_CLASS_HUB == dev->descriptor.bDeviceClass){ -+ dev_printk(KERN_CRIT, &dev->dev, "Unsupported Hub Topology\n"); -+ } else { -+ dev_printk(KERN_CRIT, &dev->dev, "Attached Device is not Supported\n"); -+ } -+} -+ -+ - static int is_targeted(struct usb_device *dev) - { - struct usb_device_id *id = whitelist_table; -@@ -95,16 +144,57 @@ static int is_targeted(struct usb_device - continue; - - return 1; -- } -+ /* NOTE: can't use usb_match_id() since interface caches -+ * aren't set up yet. this is cut/paste from that code. -+ */ -+ for (id = whitelist_table; id->match_flags; id++) { -+#ifdef DEBUG -+ dev_dbg(&dev->dev, -+ "ID: V:%04x P:%04x DC:%04x SC:%04x PR:%04x \n", -+ id->idVendor, -+ id->idProduct, -+ id->bDeviceClass, -+ id->bDeviceSubClass, -+ id->bDeviceProtocol); -+#endif - -- /* add other match criteria here ... */ -+ if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && -+ id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) -+ continue; -+ -+ if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && -+ id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) -+ continue; -+ -+ /* No need to test id->bcdDevice_lo != 0, since 0 is never -+ greater than any unsigned number. */ -+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && -+ (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) -+ continue; -+ -+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && -+ (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) -+ continue; -+ -+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && -+ (id->bDeviceClass != dev->descriptor.bDeviceClass)) -+ continue; -+ -+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && -+ (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass)) -+ continue; -+ -+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && -+ (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) -+ continue; - -+ return 1; -+ } -+ } - -- /* OTG MESSAGE: report errors here, customize to match your product */ -- dev_err(&dev->dev, "device v%04x p%04x is not supported\n", -- le16_to_cpu(dev->descriptor.idVendor), -- le16_to_cpu(dev->descriptor.idProduct)); -+ /* add other match criteria here ... */ - -+ report_errors(dev); - return 0; - } - ---- /dev/null -+++ b/drivers/usb/gadget/file_storage.c -@@ -0,0 +1,3676 @@ -+/* -+ * file_storage.c -- File-backed USB Storage Gadget, for USB development -+ * -+ * Copyright (C) 2003-2008 Alan Stern -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions, and the following disclaimer, -+ * without modification. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The names of the above-listed copyright holders may not be used -+ * to endorse or promote products derived from this software without -+ * specific prior written permission. -+ * -+ * ALTERNATIVELY, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") as published by the Free Software -+ * Foundation, either version 2 of that License or (at your option) any -+ * later version. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS -+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, -+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+ -+/* -+ * The File-backed Storage Gadget acts as a USB Mass Storage device, -+ * appearing to the host as a disk drive or as a CD-ROM drive. In addition -+ * to providing an example of a genuinely useful gadget driver for a USB -+ * device, it also illustrates a technique of double-buffering for increased -+ * throughput. Last but not least, it gives an easy way to probe the -+ * behavior of the Mass Storage drivers in a USB host. -+ * -+ * Backing storage is provided by a regular file or a block device, specified -+ * by the "file" module parameter. Access can be limited to read-only by -+ * setting the optional "ro" module parameter. (For CD-ROM emulation, -+ * access is always read-only.) The gadget will indicate that it has -+ * removable media if the optional "removable" module parameter is set. -+ * -+ * The gadget supports the Control-Bulk (CB), Control-Bulk-Interrupt (CBI), -+ * and Bulk-Only (also known as Bulk-Bulk-Bulk or BBB) transports, selected -+ * by the optional "transport" module parameter. It also supports the -+ * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03), -+ * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by -+ * the optional "protocol" module parameter. In addition, the default -+ * Vendor ID, Product ID, release number and serial number can be overridden. -+ * -+ * There is support for multiple logical units (LUNs), each of which has -+ * its own backing file. The number of LUNs can be set using the optional -+ * "luns" module parameter (anywhere from 1 to 8), and the corresponding -+ * files are specified using comma-separated lists for "file" and "ro". -+ * The default number of LUNs is taken from the number of "file" elements; -+ * it is 1 if "file" is not given. If "removable" is not set then a backing -+ * file must be specified for each LUN. If it is set, then an unspecified -+ * or empty backing filename means the LUN's medium is not loaded. Ideally -+ * each LUN would be settable independently as a disk drive or a CD-ROM -+ * drive, but currently all LUNs have to be the same type. The CD-ROM -+ * emulation includes a single data track and no audio tracks; hence there -+ * need be only one backing file per LUN. -+ * -+ * Requirements are modest; only a bulk-in and a bulk-out endpoint are -+ * needed (an interrupt-out endpoint is also needed for CBI). The memory -+ * requirement amounts to two 16K buffers, size configurable by a parameter. -+ * Support is included for both full-speed and high-speed operation. -+ * -+ * Note that the driver is slightly non-portable in that it assumes a -+ * single memory/DMA buffer will be useable for bulk-in, bulk-out, and -+ * interrupt-in endpoints. With most device controllers this isn't an -+ * issue, but there may be some with hardware restrictions that prevent -+ * a buffer from being used by more than one endpoint. -+ * -+ * Module options: -+ * -+ * file=filename[,filename...] -+ * Required if "removable" is not set, names of -+ * the files or block devices used for -+ * backing storage -+ * serial=HHHH... Required serial number (string of hex chars) -+ * ro=b[,b...] Default false, booleans for read-only access -+ * removable Default false, boolean for removable media -+ * luns=N Default N = number of filenames, number of -+ * LUNs to support -+ * nofua=b[,b...] Default false, booleans for ignore FUA flag -+ * in SCSI WRITE(10,12) commands -+ * stall Default determined according to the type of -+ * USB device controller (usually true), -+ * boolean to permit the driver to halt -+ * bulk endpoints -+ * cdrom Default false, boolean for whether to emulate -+ * a CD-ROM drive -+ * transport=XXX Default BBB, transport name (CB, CBI, or BBB) -+ * protocol=YYY Default SCSI, protocol name (RBC, 8020 or -+ * ATAPI, QIC, UFI, 8070, or SCSI; -+ * also 1 - 6) -+ * vendor=0xVVVV Default 0x0525 (NetChip), USB Vendor ID -+ * product=0xPPPP Default 0xa4a5 (FSG), USB Product ID -+ * release=0xRRRR Override the USB release number (bcdDevice) -+ * buflen=N Default N=16384, buffer size used (will be -+ * rounded down to a multiple of -+ * PAGE_CACHE_SIZE) -+ * -+ * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "serial", "ro", -+ * "removable", "luns", "nofua", "stall", and "cdrom" options are available; -+ * default values are used for everything else. -+ * -+ * The pathnames of the backing files and the ro settings are available in -+ * the attribute files "file", "nofua", and "ro" in the lun subdirectory of -+ * the gadget's sysfs directory. If the "removable" option is set, writing to -+ * these files will simulate ejecting/loading the medium (writing an empty -+ * line means eject) and adjusting a write-enable tab. Changes to the ro -+ * setting are not allowed when the medium is loaded or if CD-ROM emulation -+ * is being used. -+ * -+ * This gadget driver is heavily based on "Gadget Zero" by David Brownell. -+ * The driver's SCSI command interface was based on the "Information -+ * technology - Small Computer System Interface - 2" document from -+ * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at -+ * . The single exception -+ * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the -+ * "Universal Serial Bus Mass Storage Class UFI Command Specification" -+ * document, Revision 1.0, December 14, 1998, available at -+ * . -+ */ -+ -+ -+/* -+ * Driver Design -+ * -+ * The FSG driver is fairly straightforward. There is a main kernel -+ * thread that handles most of the work. Interrupt routines field -+ * callbacks from the controller driver: bulk- and interrupt-request -+ * completion notifications, endpoint-0 events, and disconnect events. -+ * Completion events are passed to the main thread by wakeup calls. Many -+ * ep0 requests are handled at interrupt time, but SetInterface, -+ * SetConfiguration, and device reset requests are forwarded to the -+ * thread in the form of "exceptions" using SIGUSR1 signals (since they -+ * should interrupt any ongoing file I/O operations). -+ * -+ * The thread's main routine implements the standard command/data/status -+ * parts of a SCSI interaction. It and its subroutines are full of tests -+ * for pending signals/exceptions -- all this polling is necessary since -+ * the kernel has no setjmp/longjmp equivalents. (Maybe this is an -+ * indication that the driver really wants to be running in userspace.) -+ * An important point is that so long as the thread is alive it keeps an -+ * open reference to the backing file. This will prevent unmounting -+ * the backing file's underlying filesystem and could cause problems -+ * during system shutdown, for example. To prevent such problems, the -+ * thread catches INT, TERM, and KILL signals and converts them into -+ * an EXIT exception. -+ * -+ * In normal operation the main thread is started during the gadget's -+ * fsg_bind() callback and stopped during fsg_unbind(). But it can also -+ * exit when it receives a signal, and there's no point leaving the -+ * gadget running when the thread is dead. So just before the thread -+ * exits, it deregisters the gadget driver. This makes things a little -+ * tricky: The driver is deregistered at two places, and the exiting -+ * thread can indirectly call fsg_unbind() which in turn can tell the -+ * thread to exit. The first problem is resolved through the use of the -+ * REGISTERED atomic bitflag; the driver will only be deregistered once. -+ * The second problem is resolved by having fsg_unbind() check -+ * fsg->state; it won't try to stop the thread if the state is already -+ * FSG_STATE_TERMINATED. -+ * -+ * To provide maximum throughput, the driver uses a circular pipeline of -+ * buffer heads (struct fsg_buffhd). In principle the pipeline can be -+ * arbitrarily long; in practice the benefits don't justify having more -+ * than 2 stages (i.e., double buffering). But it helps to think of the -+ * pipeline as being a long one. Each buffer head contains a bulk-in and -+ * a bulk-out request pointer (since the buffer can be used for both -+ * output and input -- directions always are given from the host's -+ * point of view) as well as a pointer to the buffer and various state -+ * variables. -+ * -+ * Use of the pipeline follows a simple protocol. There is a variable -+ * (fsg->next_buffhd_to_fill) that points to the next buffer head to use. -+ * At any time that buffer head may still be in use from an earlier -+ * request, so each buffer head has a state variable indicating whether -+ * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the -+ * buffer head to be EMPTY, filling the buffer either by file I/O or by -+ * USB I/O (during which the buffer head is BUSY), and marking the buffer -+ * head FULL when the I/O is complete. Then the buffer will be emptied -+ * (again possibly by USB I/O, during which it is marked BUSY) and -+ * finally marked EMPTY again (possibly by a completion routine). -+ * -+ * A module parameter tells the driver to avoid stalling the bulk -+ * endpoints wherever the transport specification allows. This is -+ * necessary for some UDCs like the SuperH, which cannot reliably clear a -+ * halt on a bulk endpoint. However, under certain circumstances the -+ * Bulk-only specification requires a stall. In such cases the driver -+ * will halt the endpoint and set a flag indicating that it should clear -+ * the halt in software during the next device reset. Hopefully this -+ * will permit everything to work correctly. Furthermore, although the -+ * specification allows the bulk-out endpoint to halt when the host sends -+ * too much data, implementing this would cause an unavoidable race. -+ * The driver will always use the "no-stall" approach for OUT transfers. -+ * -+ * One subtle point concerns sending status-stage responses for ep0 -+ * requests. Some of these requests, such as device reset, can involve -+ * interrupting an ongoing file I/O operation, which might take an -+ * arbitrarily long time. During that delay the host might give up on -+ * the original ep0 request and issue a new one. When that happens the -+ * driver should not notify the host about completion of the original -+ * request, as the host will no longer be waiting for it. So the driver -+ * assigns to each ep0 request a unique tag, and it keeps track of the -+ * tag value of the request associated with a long-running exception -+ * (device-reset, interface-change, or configuration-change). When the -+ * exception handler is finished, the status-stage response is submitted -+ * only if the current ep0 request tag is equal to the exception request -+ * tag. Thus only the most recently received ep0 request will get a -+ * status-stage response. -+ * -+ * Warning: This driver source file is too long. It ought to be split up -+ * into a header file plus about 3 separate .c files, to handle the details -+ * of the Gadget, USB Mass Storage, and SCSI protocols. -+ */ -+ -+ -+/* #define VERBOSE_DEBUG */ -+/* #define DUMP_MSGS */ -+ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include "gadget_chips.h" -+ -+ -+ -+/* -+ * Kbuild is not very cooperative with respect to linking separately -+ * compiled library objects into one module. So for now we won't use -+ * separate compilation ... ensuring init/exit sections work to shrink -+ * the runtime footprint, and giving us at least some parts of what -+ * a "gcc --combine ... part1.c part2.c part3.c ... " build would. -+ */ -+#include "usbstring.c" -+#include "config.c" -+#include "epautoconf.c" -+ -+/*-------------------------------------------------------------------------*/ -+ -+#define DRIVER_DESC "File-backed Storage Gadget" -+#define DRIVER_NAME "g_file_storage" -+#define DRIVER_VERSION "1 September 2010" -+ -+static char fsg_string_manufacturer[64]; -+static const char fsg_string_product[] = DRIVER_DESC; -+static const char fsg_string_config[] = "Self-powered"; -+static const char fsg_string_interface[] = "Mass Storage"; -+ -+ -+#include "storage_common.c" -+ -+ -+MODULE_DESCRIPTION(DRIVER_DESC); -+MODULE_AUTHOR("Alan Stern"); -+MODULE_LICENSE("Dual BSD/GPL"); -+ -+/* -+ * This driver assumes self-powered hardware and has no way for users to -+ * trigger remote wakeup. It uses autoconfiguration to select endpoints -+ * and endpoint addresses. -+ */ -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+ -+/* Encapsulate the module parameter settings */ -+ -+static struct { -+ char *file[FSG_MAX_LUNS]; -+ char *serial; -+ bool ro[FSG_MAX_LUNS]; -+ bool nofua[FSG_MAX_LUNS]; -+ unsigned int num_filenames; -+ unsigned int num_ros; -+ unsigned int num_nofuas; -+ unsigned int nluns; -+ -+ bool removable; -+ bool can_stall; -+ bool cdrom; -+ -+ char *transport_parm; -+ char *protocol_parm; -+ unsigned short vendor; -+ unsigned short product; -+ unsigned short release; -+ unsigned int buflen; -+ -+ int transport_type; -+ char *transport_name; -+ int protocol_type; -+ char *protocol_name; -+ -+} mod_data = { // Default values -+ .transport_parm = "BBB", -+ .protocol_parm = "SCSI", -+ .removable = 0, -+ .can_stall = 1, -+ .cdrom = 0, -+ .vendor = FSG_VENDOR_ID, -+ .product = FSG_PRODUCT_ID, -+ .release = 0xffff, // Use controller chip type -+ .buflen = 16384, -+ }; -+ -+ -+module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames, -+ S_IRUGO); -+MODULE_PARM_DESC(file, "names of backing files or devices"); -+ -+module_param_named(serial, mod_data.serial, charp, S_IRUGO); -+MODULE_PARM_DESC(serial, "USB serial number"); -+ -+module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO); -+MODULE_PARM_DESC(ro, "true to force read-only"); -+ -+module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas, -+ S_IRUGO); -+MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit"); -+ -+module_param_named(luns, mod_data.nluns, uint, S_IRUGO); -+MODULE_PARM_DESC(luns, "number of LUNs"); -+ -+module_param_named(removable, mod_data.removable, bool, S_IRUGO); -+MODULE_PARM_DESC(removable, "true to simulate removable media"); -+ -+module_param_named(stall, mod_data.can_stall, bool, S_IRUGO); -+MODULE_PARM_DESC(stall, "false to prevent bulk stalls"); -+ -+module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO); -+MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk"); -+ -+/* In the non-TEST version, only the module parameters listed above -+ * are available. */ -+#ifdef CONFIG_USB_FILE_STORAGE_TEST -+ -+module_param_named(transport, mod_data.transport_parm, charp, S_IRUGO); -+MODULE_PARM_DESC(transport, "type of transport (BBB, CBI, or CB)"); -+ -+module_param_named(protocol, mod_data.protocol_parm, charp, S_IRUGO); -+MODULE_PARM_DESC(protocol, "type of protocol (RBC, 8020, QIC, UFI, " -+ "8070, or SCSI)"); -+ -+module_param_named(vendor, mod_data.vendor, ushort, S_IRUGO); -+MODULE_PARM_DESC(vendor, "USB Vendor ID"); -+ -+module_param_named(product, mod_data.product, ushort, S_IRUGO); -+MODULE_PARM_DESC(product, "USB Product ID"); -+ -+module_param_named(release, mod_data.release, ushort, S_IRUGO); -+MODULE_PARM_DESC(release, "USB release number"); -+ -+module_param_named(buflen, mod_data.buflen, uint, S_IRUGO); -+MODULE_PARM_DESC(buflen, "I/O buffer size"); -+ -+#endif /* CONFIG_USB_FILE_STORAGE_TEST */ -+ -+ -+/* -+ * These definitions will permit the compiler to avoid generating code for -+ * parts of the driver that aren't used in the non-TEST version. Even gcc -+ * can recognize when a test of a constant expression yields a dead code -+ * path. -+ */ -+ -+#ifdef CONFIG_USB_FILE_STORAGE_TEST -+ -+#define transport_is_bbb() (mod_data.transport_type == USB_PR_BULK) -+#define transport_is_cbi() (mod_data.transport_type == USB_PR_CBI) -+#define protocol_is_scsi() (mod_data.protocol_type == USB_SC_SCSI) -+ -+#else -+ -+#define transport_is_bbb() 1 -+#define transport_is_cbi() 0 -+#define protocol_is_scsi() 1 -+ -+#endif /* CONFIG_USB_FILE_STORAGE_TEST */ -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+ -+struct fsg_dev { -+ /* lock protects: state, all the req_busy's, and cbbuf_cmnd */ -+ spinlock_t lock; -+ struct usb_gadget *gadget; -+ -+ /* filesem protects: backing files in use */ -+ struct rw_semaphore filesem; -+ -+ /* reference counting: wait until all LUNs are released */ -+ struct kref ref; -+ -+ struct usb_ep *ep0; // Handy copy of gadget->ep0 -+ struct usb_request *ep0req; // For control responses -+ unsigned int ep0_req_tag; -+ const char *ep0req_name; -+ -+ struct usb_request *intreq; // For interrupt responses -+ int intreq_busy; -+ struct fsg_buffhd *intr_buffhd; -+ -+ unsigned int bulk_out_maxpacket; -+ enum fsg_state state; // For exception handling -+ unsigned int exception_req_tag; -+ -+ u8 config, new_config; -+ -+ unsigned int running : 1; -+ unsigned int bulk_in_enabled : 1; -+ unsigned int bulk_out_enabled : 1; -+ unsigned int intr_in_enabled : 1; -+ unsigned int phase_error : 1; -+ unsigned int short_packet_received : 1; -+ unsigned int bad_lun_okay : 1; -+ -+ unsigned long atomic_bitflags; -+#define REGISTERED 0 -+#define IGNORE_BULK_OUT 1 -+#define SUSPENDED 2 -+ -+ struct usb_ep *bulk_in; -+ struct usb_ep *bulk_out; -+ struct usb_ep *intr_in; -+ -+ struct fsg_buffhd *next_buffhd_to_fill; -+ struct fsg_buffhd *next_buffhd_to_drain; -+ -+ int thread_wakeup_needed; -+ struct completion thread_notifier; -+ struct task_struct *thread_task; -+ -+ int cmnd_size; -+ u8 cmnd[MAX_COMMAND_SIZE]; -+ enum data_direction data_dir; -+ u32 data_size; -+ u32 data_size_from_cmnd; -+ u32 tag; -+ unsigned int lun; -+ u32 residue; -+ u32 usb_amount_left; -+ -+ /* The CB protocol offers no way for a host to know when a command -+ * has completed. As a result the next command may arrive early, -+ * and we will still have to handle it. For that reason we need -+ * a buffer to store new commands when using CB (or CBI, which -+ * does not oblige a host to wait for command completion either). */ -+ int cbbuf_cmnd_size; -+ u8 cbbuf_cmnd[MAX_COMMAND_SIZE]; -+ -+ unsigned int nluns; -+ struct fsg_lun *luns; -+ struct fsg_lun *curlun; -+ /* Must be the last entry */ -+ struct fsg_buffhd buffhds[]; -+}; -+ -+typedef void (*fsg_routine_t)(struct fsg_dev *); -+ -+static int exception_in_progress(struct fsg_dev *fsg) -+{ -+ return (fsg->state > FSG_STATE_IDLE); -+} -+ -+/* Make bulk-out requests be divisible by the maxpacket size */ -+static void set_bulk_out_req_length(struct fsg_dev *fsg, -+ struct fsg_buffhd *bh, unsigned int length) -+{ -+ unsigned int rem; -+ -+ bh->bulk_out_intended_length = length; -+ rem = length % fsg->bulk_out_maxpacket; -+ if (rem > 0) -+ length += fsg->bulk_out_maxpacket - rem; -+ bh->outreq->length = length; -+} -+ -+static struct fsg_dev *the_fsg; -+static struct usb_gadget_driver fsg_driver; -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) -+{ -+ const char *name; -+ -+ if (ep == fsg->bulk_in) -+ name = "bulk-in"; -+ else if (ep == fsg->bulk_out) -+ name = "bulk-out"; -+ else -+ name = ep->name; -+ DBG(fsg, "%s set halt\n", name); -+ return usb_ep_set_halt(ep); -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* -+ * DESCRIPTORS ... most are static, but strings and (full) configuration -+ * descriptors are built on demand. Also the (static) config and interface -+ * descriptors are adjusted during fsg_bind(). -+ */ -+ -+/* There is only one configuration. */ -+#define CONFIG_VALUE 1 -+ -+static struct usb_device_descriptor -+device_desc = { -+ .bLength = sizeof device_desc, -+ .bDescriptorType = USB_DT_DEVICE, -+ -+ .bcdUSB = cpu_to_le16(0x0200), -+ .bDeviceClass = USB_CLASS_PER_INTERFACE, -+ -+ /* The next three values can be overridden by module parameters */ -+ .idVendor = cpu_to_le16(FSG_VENDOR_ID), -+ .idProduct = cpu_to_le16(FSG_PRODUCT_ID), -+ .bcdDevice = cpu_to_le16(0xffff), -+ -+ .iManufacturer = FSG_STRING_MANUFACTURER, -+ .iProduct = FSG_STRING_PRODUCT, -+ .iSerialNumber = FSG_STRING_SERIAL, -+ .bNumConfigurations = 1, -+}; -+ -+static struct usb_config_descriptor -+config_desc = { -+ .bLength = sizeof config_desc, -+ .bDescriptorType = USB_DT_CONFIG, -+ -+ /* wTotalLength computed by usb_gadget_config_buf() */ -+ .bNumInterfaces = 1, -+ .bConfigurationValue = CONFIG_VALUE, -+ .iConfiguration = FSG_STRING_CONFIG, -+ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, -+ .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, -+}; -+ -+ -+static struct usb_qualifier_descriptor -+dev_qualifier = { -+ .bLength = sizeof dev_qualifier, -+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER, -+ -+ .bcdUSB = cpu_to_le16(0x0200), -+ .bDeviceClass = USB_CLASS_PER_INTERFACE, -+ -+ .bNumConfigurations = 1, -+}; -+ -+static int populate_bos(struct fsg_dev *fsg, u8 *buf) -+{ -+ memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE); -+ buf += USB_DT_BOS_SIZE; -+ -+ memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE); -+ buf += USB_DT_USB_EXT_CAP_SIZE; -+ -+ memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE); -+ -+ return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE -+ + USB_DT_USB_EXT_CAP_SIZE; -+} -+ -+/* -+ * Config descriptors must agree with the code that sets configurations -+ * and with code managing interfaces and their altsettings. They must -+ * also handle different speeds and other-speed requests. -+ */ -+static int populate_config_buf(struct usb_gadget *gadget, -+ u8 *buf, u8 type, unsigned index) -+{ -+ enum usb_device_speed speed = gadget->speed; -+ int len; -+ const struct usb_descriptor_header **function; -+ -+ if (index > 0) -+ return -EINVAL; -+ -+ if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG) -+ speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed; -+ function = gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH -+ ? (const struct usb_descriptor_header **)fsg_hs_function -+ : (const struct usb_descriptor_header **)fsg_fs_function; -+ -+ /* for now, don't advertise srp-only devices */ -+ if (!gadget_is_otg(gadget)) -+ function++; -+ -+ len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function); -+ ((struct usb_config_descriptor *) buf)->bDescriptorType = type; -+ return len; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* These routines may be called in process context or in_irq */ -+ -+/* Caller must hold fsg->lock */ -+static void wakeup_thread(struct fsg_dev *fsg) -+{ -+ /* Tell the main thread that something has happened */ -+ fsg->thread_wakeup_needed = 1; -+ if (fsg->thread_task) -+ wake_up_process(fsg->thread_task); -+} -+ -+ -+static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state) -+{ -+ unsigned long flags; -+ -+ /* Do nothing if a higher-priority exception is already in progress. -+ * If a lower-or-equal priority exception is in progress, preempt it -+ * and notify the main thread by sending it a signal. */ -+ spin_lock_irqsave(&fsg->lock, flags); -+ if (fsg->state <= new_state) { -+ fsg->exception_req_tag = fsg->ep0_req_tag; -+ fsg->state = new_state; -+ if (fsg->thread_task) -+ send_sig_info(SIGUSR1, SEND_SIG_FORCED, -+ fsg->thread_task); -+ } -+ spin_unlock_irqrestore(&fsg->lock, flags); -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* The disconnect callback and ep0 routines. These always run in_irq, -+ * except that ep0_queue() is called in the main thread to acknowledge -+ * completion of various requests: set config, set interface, and -+ * Bulk-only device reset. */ -+ -+static void fsg_disconnect(struct usb_gadget *gadget) -+{ -+ struct fsg_dev *fsg = get_gadget_data(gadget); -+ -+ DBG(fsg, "disconnect or port reset\n"); -+ raise_exception(fsg, FSG_STATE_DISCONNECT); -+} -+ -+ -+static int ep0_queue(struct fsg_dev *fsg) -+{ -+ int rc; -+ -+ rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC); -+ if (rc != 0 && rc != -ESHUTDOWN) { -+ -+ /* We can't do much more than wait for a reset */ -+ WARNING(fsg, "error in submission: %s --> %d\n", -+ fsg->ep0->name, rc); -+ } -+ return rc; -+} -+ -+static void ep0_complete(struct usb_ep *ep, struct usb_request *req) -+{ -+ struct fsg_dev *fsg = ep->driver_data; -+ -+ if (req->actual > 0) -+ dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual); -+ if (req->status || req->actual != req->length) -+ DBG(fsg, "%s --> %d, %u/%u\n", __func__, -+ req->status, req->actual, req->length); -+ if (req->status == -ECONNRESET) // Request was cancelled -+ usb_ep_fifo_flush(ep); -+ -+ if (req->status == 0 && req->context) -+ ((fsg_routine_t) (req->context))(fsg); -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* Bulk and interrupt endpoint completion handlers. -+ * These always run in_irq. */ -+ -+static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) -+{ -+ struct fsg_dev *fsg = ep->driver_data; -+ struct fsg_buffhd *bh = req->context; -+ -+ if (req->status || req->actual != req->length) -+ DBG(fsg, "%s --> %d, %u/%u\n", __func__, -+ req->status, req->actual, req->length); -+ if (req->status == -ECONNRESET) // Request was cancelled -+ usb_ep_fifo_flush(ep); -+ -+ /* Hold the lock while we update the request and buffer states */ -+ smp_wmb(); -+ spin_lock(&fsg->lock); -+ bh->inreq_busy = 0; -+ bh->state = BUF_STATE_EMPTY; -+ wakeup_thread(fsg); -+ spin_unlock(&fsg->lock); -+} -+ -+static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) -+{ -+ struct fsg_dev *fsg = ep->driver_data; -+ struct fsg_buffhd *bh = req->context; -+ -+ dump_msg(fsg, "bulk-out", req->buf, req->actual); -+ if (req->status || req->actual != bh->bulk_out_intended_length) -+ DBG(fsg, "%s --> %d, %u/%u\n", __func__, -+ req->status, req->actual, -+ bh->bulk_out_intended_length); -+ if (req->status == -ECONNRESET) // Request was cancelled -+ usb_ep_fifo_flush(ep); -+ -+ /* Hold the lock while we update the request and buffer states */ -+ smp_wmb(); -+ spin_lock(&fsg->lock); -+ bh->outreq_busy = 0; -+ bh->state = BUF_STATE_FULL; -+ wakeup_thread(fsg); -+ spin_unlock(&fsg->lock); -+} -+ -+ -+#ifdef CONFIG_USB_FILE_STORAGE_TEST -+static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) -+{ -+ struct fsg_dev *fsg = ep->driver_data; -+ struct fsg_buffhd *bh = req->context; -+ -+ if (req->status || req->actual != req->length) -+ DBG(fsg, "%s --> %d, %u/%u\n", __func__, -+ req->status, req->actual, req->length); -+ if (req->status == -ECONNRESET) // Request was cancelled -+ usb_ep_fifo_flush(ep); -+ -+ /* Hold the lock while we update the request and buffer states */ -+ smp_wmb(); -+ spin_lock(&fsg->lock); -+ fsg->intreq_busy = 0; -+ bh->state = BUF_STATE_EMPTY; -+ wakeup_thread(fsg); -+ spin_unlock(&fsg->lock); -+} -+ -+#else -+static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) -+{} -+#endif /* CONFIG_USB_FILE_STORAGE_TEST */ -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* Ep0 class-specific handlers. These always run in_irq. */ -+ -+#ifdef CONFIG_USB_FILE_STORAGE_TEST -+static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ struct usb_request *req = fsg->ep0req; -+ static u8 cbi_reset_cmnd[6] = { -+ SEND_DIAGNOSTIC, 4, 0xff, 0xff, 0xff, 0xff}; -+ -+ /* Error in command transfer? */ -+ if (req->status || req->length != req->actual || -+ req->actual < 6 || req->actual > MAX_COMMAND_SIZE) { -+ -+ /* Not all controllers allow a protocol stall after -+ * receiving control-out data, but we'll try anyway. */ -+ fsg_set_halt(fsg, fsg->ep0); -+ return; // Wait for reset -+ } -+ -+ /* Is it the special reset command? */ -+ if (req->actual >= sizeof cbi_reset_cmnd && -+ memcmp(req->buf, cbi_reset_cmnd, -+ sizeof cbi_reset_cmnd) == 0) { -+ -+ /* Raise an exception to stop the current operation -+ * and reinitialize our state. */ -+ DBG(fsg, "cbi reset request\n"); -+ raise_exception(fsg, FSG_STATE_RESET); -+ return; -+ } -+ -+ VDBG(fsg, "CB[I] accept device-specific command\n"); -+ spin_lock(&fsg->lock); -+ -+ /* Save the command for later */ -+ if (fsg->cbbuf_cmnd_size) -+ WARNING(fsg, "CB[I] overwriting previous command\n"); -+ fsg->cbbuf_cmnd_size = req->actual; -+ memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size); -+ -+ wakeup_thread(fsg); -+ spin_unlock(&fsg->lock); -+} -+ -+#else -+static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{} -+#endif /* CONFIG_USB_FILE_STORAGE_TEST */ -+ -+ -+static int class_setup_req(struct fsg_dev *fsg, -+ const struct usb_ctrlrequest *ctrl) -+{ -+ struct usb_request *req = fsg->ep0req; -+ int value = -EOPNOTSUPP; -+ u16 w_index = le16_to_cpu(ctrl->wIndex); -+ u16 w_value = le16_to_cpu(ctrl->wValue); -+ u16 w_length = le16_to_cpu(ctrl->wLength); -+ -+ if (!fsg->config) -+ return value; -+ -+ /* Handle Bulk-only class-specific requests */ -+ if (transport_is_bbb()) { -+ switch (ctrl->bRequest) { -+ -+ case US_BULK_RESET_REQUEST: -+ if (ctrl->bRequestType != (USB_DIR_OUT | -+ USB_TYPE_CLASS | USB_RECIP_INTERFACE)) -+ break; -+ if (w_index != 0 || w_value != 0 || w_length != 0) { -+ value = -EDOM; -+ break; -+ } -+ -+ /* Raise an exception to stop the current operation -+ * and reinitialize our state. */ -+ DBG(fsg, "bulk reset request\n"); -+ raise_exception(fsg, FSG_STATE_RESET); -+ value = DELAYED_STATUS; -+ break; -+ -+ case US_BULK_GET_MAX_LUN: -+ if (ctrl->bRequestType != (USB_DIR_IN | -+ USB_TYPE_CLASS | USB_RECIP_INTERFACE)) -+ break; -+ if (w_index != 0 || w_value != 0 || w_length != 1) { -+ value = -EDOM; -+ break; -+ } -+ VDBG(fsg, "get max LUN\n"); -+ *(u8 *) req->buf = fsg->nluns - 1; -+ value = 1; -+ break; -+ } -+ } -+ -+ /* Handle CBI class-specific requests */ -+ else { -+ switch (ctrl->bRequest) { -+ -+ case USB_CBI_ADSC_REQUEST: -+ if (ctrl->bRequestType != (USB_DIR_OUT | -+ USB_TYPE_CLASS | USB_RECIP_INTERFACE)) -+ break; -+ if (w_index != 0 || w_value != 0) { -+ value = -EDOM; -+ break; -+ } -+ if (w_length > MAX_COMMAND_SIZE) { -+ value = -EOVERFLOW; -+ break; -+ } -+ value = w_length; -+ fsg->ep0req->context = received_cbi_adsc; -+ break; -+ } -+ } -+ -+ if (value == -EOPNOTSUPP) -+ VDBG(fsg, -+ "unknown class-specific control req " -+ "%02x.%02x v%04x i%04x l%u\n", -+ ctrl->bRequestType, ctrl->bRequest, -+ le16_to_cpu(ctrl->wValue), w_index, w_length); -+ return value; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* Ep0 standard request handlers. These always run in_irq. */ -+ -+static int standard_setup_req(struct fsg_dev *fsg, -+ const struct usb_ctrlrequest *ctrl) -+{ -+ struct usb_request *req = fsg->ep0req; -+ int value = -EOPNOTSUPP; -+ u16 w_index = le16_to_cpu(ctrl->wIndex); -+ u16 w_value = le16_to_cpu(ctrl->wValue); -+ -+ /* Usually this just stores reply data in the pre-allocated ep0 buffer, -+ * but config change events will also reconfigure hardware. */ -+ switch (ctrl->bRequest) { -+ -+ case USB_REQ_GET_DESCRIPTOR: -+ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | -+ USB_RECIP_DEVICE)) -+ break; -+ switch (w_value >> 8) { -+ -+ case USB_DT_DEVICE: -+ VDBG(fsg, "get device descriptor\n"); -+ device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket; -+ value = sizeof device_desc; -+ memcpy(req->buf, &device_desc, value); -+ break; -+ case USB_DT_DEVICE_QUALIFIER: -+ VDBG(fsg, "get device qualifier\n"); -+ if (!gadget_is_dualspeed(fsg->gadget) || -+ fsg->gadget->speed == USB_SPEED_SUPER) -+ break; -+ /* -+ * Assume ep0 uses the same maxpacket value for both -+ * speeds -+ */ -+ dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket; -+ value = sizeof dev_qualifier; -+ memcpy(req->buf, &dev_qualifier, value); -+ break; -+ -+ case USB_DT_OTHER_SPEED_CONFIG: -+ VDBG(fsg, "get other-speed config descriptor\n"); -+ if (!gadget_is_dualspeed(fsg->gadget) || -+ fsg->gadget->speed == USB_SPEED_SUPER) -+ break; -+ goto get_config; -+ case USB_DT_CONFIG: -+ VDBG(fsg, "get configuration descriptor\n"); -+get_config: -+ value = populate_config_buf(fsg->gadget, -+ req->buf, -+ w_value >> 8, -+ w_value & 0xff); -+ break; -+ -+ case USB_DT_STRING: -+ VDBG(fsg, "get string descriptor\n"); -+ -+ /* wIndex == language code */ -+ value = usb_gadget_get_string(&fsg_stringtab, -+ w_value & 0xff, req->buf); -+ break; -+ -+ case USB_DT_BOS: -+ VDBG(fsg, "get bos descriptor\n"); -+ -+ if (gadget_is_superspeed(fsg->gadget)) -+ value = populate_bos(fsg, req->buf); -+ break; -+ } -+ -+ break; -+ -+ /* One config, two speeds */ -+ case USB_REQ_SET_CONFIGURATION: -+ if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD | -+ USB_RECIP_DEVICE)) -+ break; -+ VDBG(fsg, "set configuration\n"); -+ if (w_value == CONFIG_VALUE || w_value == 0) { -+ fsg->new_config = w_value; -+ -+ /* Raise an exception to wipe out previous transaction -+ * state (queued bufs, etc) and set the new config. */ -+ raise_exception(fsg, FSG_STATE_CONFIG_CHANGE); -+ value = DELAYED_STATUS; -+ } -+ break; -+ case USB_REQ_GET_CONFIGURATION: -+ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | -+ USB_RECIP_DEVICE)) -+ break; -+ VDBG(fsg, "get configuration\n"); -+ *(u8 *) req->buf = fsg->config; -+ value = 1; -+ break; -+ -+ case USB_REQ_SET_INTERFACE: -+ if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD | -+ USB_RECIP_INTERFACE)) -+ break; -+ if (fsg->config && w_index == 0) { -+ -+ /* Raise an exception to wipe out previous transaction -+ * state (queued bufs, etc) and install the new -+ * interface altsetting. */ -+ raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE); -+ value = DELAYED_STATUS; -+ } -+ break; -+ case USB_REQ_GET_INTERFACE: -+ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | -+ USB_RECIP_INTERFACE)) -+ break; -+ if (!fsg->config) -+ break; -+ if (w_index != 0) { -+ value = -EDOM; -+ break; -+ } -+ VDBG(fsg, "get interface\n"); -+ *(u8 *) req->buf = 0; -+ value = 1; -+ break; -+ -+ default: -+ VDBG(fsg, -+ "unknown control req %02x.%02x v%04x i%04x l%u\n", -+ ctrl->bRequestType, ctrl->bRequest, -+ w_value, w_index, le16_to_cpu(ctrl->wLength)); -+ } -+ -+ return value; -+} -+ -+ -+static int fsg_setup(struct usb_gadget *gadget, -+ const struct usb_ctrlrequest *ctrl) -+{ -+ struct fsg_dev *fsg = get_gadget_data(gadget); -+ int rc; -+ int w_length = le16_to_cpu(ctrl->wLength); -+ -+ ++fsg->ep0_req_tag; // Record arrival of a new request -+ fsg->ep0req->context = NULL; -+ fsg->ep0req->length = 0; -+ dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl)); -+ -+ if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) -+ rc = class_setup_req(fsg, ctrl); -+ else -+ rc = standard_setup_req(fsg, ctrl); -+ -+ /* Respond with data/status or defer until later? */ -+ if (rc >= 0 && rc != DELAYED_STATUS) { -+ rc = min(rc, w_length); -+ fsg->ep0req->length = rc; -+ fsg->ep0req->zero = rc < w_length; -+ fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ? -+ "ep0-in" : "ep0-out"); -+ rc = ep0_queue(fsg); -+ } -+ -+ /* Device either stalls (rc < 0) or reports success */ -+ return rc; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* All the following routines run in process context */ -+ -+ -+/* Use this for bulk or interrupt transfers, not ep0 */ -+static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, -+ struct usb_request *req, int *pbusy, -+ enum fsg_buffer_state *state) -+{ -+ int rc; -+ -+ if (ep == fsg->bulk_in) -+ dump_msg(fsg, "bulk-in", req->buf, req->length); -+ else if (ep == fsg->intr_in) -+ dump_msg(fsg, "intr-in", req->buf, req->length); -+ -+ spin_lock_irq(&fsg->lock); -+ *pbusy = 1; -+ *state = BUF_STATE_BUSY; -+ spin_unlock_irq(&fsg->lock); -+ rc = usb_ep_queue(ep, req, GFP_KERNEL); -+ if (rc != 0) { -+ *pbusy = 0; -+ *state = BUF_STATE_EMPTY; -+ -+ /* We can't do much more than wait for a reset */ -+ -+ /* Note: currently the net2280 driver fails zero-length -+ * submissions if DMA is enabled. */ -+ if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP && -+ req->length == 0)) -+ WARNING(fsg, "error in submission: %s --> %d\n", -+ ep->name, rc); -+ } -+} -+ -+ -+static int sleep_thread(struct fsg_dev *fsg) -+{ -+ int rc = 0; -+ -+ /* Wait until a signal arrives or we are woken up */ -+ for (;;) { -+ try_to_freeze(); -+ set_current_state(TASK_INTERRUPTIBLE); -+ if (signal_pending(current)) { -+ rc = -EINTR; -+ break; -+ } -+ if (fsg->thread_wakeup_needed) -+ break; -+ schedule(); -+ } -+ __set_current_state(TASK_RUNNING); -+ fsg->thread_wakeup_needed = 0; -+ return rc; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int do_read(struct fsg_dev *fsg) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ u32 lba; -+ struct fsg_buffhd *bh; -+ int rc; -+ u32 amount_left; -+ loff_t file_offset, file_offset_tmp; -+ unsigned int amount; -+ ssize_t nread; -+ -+ /* Get the starting Logical Block Address and check that it's -+ * not too big */ -+ if (fsg->cmnd[0] == READ_6) -+ lba = get_unaligned_be24(&fsg->cmnd[1]); -+ else { -+ lba = get_unaligned_be32(&fsg->cmnd[2]); -+ -+ /* We allow DPO (Disable Page Out = don't save data in the -+ * cache) and FUA (Force Unit Access = don't read from the -+ * cache), but we don't implement them. */ -+ if ((fsg->cmnd[1] & ~0x18) != 0) { -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ } -+ if (lba >= curlun->num_sectors) { -+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; -+ return -EINVAL; -+ } -+ file_offset = ((loff_t) lba) << curlun->blkbits; -+ -+ /* Carry out the file reads */ -+ amount_left = fsg->data_size_from_cmnd; -+ if (unlikely(amount_left == 0)) -+ return -EIO; // No default reply -+ -+ for (;;) { -+ -+ /* Figure out how much we need to read: -+ * Try to read the remaining amount. -+ * But don't read more than the buffer size. -+ * And don't try to read past the end of the file. -+ */ -+ amount = min((unsigned int) amount_left, mod_data.buflen); -+ amount = min((loff_t) amount, -+ curlun->file_length - file_offset); -+ -+ /* Wait for the next buffer to become available */ -+ bh = fsg->next_buffhd_to_fill; -+ while (bh->state != BUF_STATE_EMPTY) { -+ rc = sleep_thread(fsg); -+ if (rc) -+ return rc; -+ } -+ -+ /* If we were asked to read past the end of file, -+ * end with an empty buffer. */ -+ if (amount == 0) { -+ curlun->sense_data = -+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; -+ curlun->sense_data_info = file_offset >> curlun->blkbits; -+ curlun->info_valid = 1; -+ bh->inreq->length = 0; -+ bh->state = BUF_STATE_FULL; -+ break; -+ } -+ -+ /* Perform the read */ -+ file_offset_tmp = file_offset; -+ nread = vfs_read(curlun->filp, -+ (char __user *) bh->buf, -+ amount, &file_offset_tmp); -+ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, -+ (unsigned long long) file_offset, -+ (int) nread); -+ if (signal_pending(current)) -+ return -EINTR; -+ -+ if (nread < 0) { -+ LDBG(curlun, "error in file read: %d\n", -+ (int) nread); -+ nread = 0; -+ } else if (nread < amount) { -+ LDBG(curlun, "partial file read: %d/%u\n", -+ (int) nread, amount); -+ nread = round_down(nread, curlun->blksize); -+ } -+ file_offset += nread; -+ amount_left -= nread; -+ fsg->residue -= nread; -+ -+ /* Except at the end of the transfer, nread will be -+ * equal to the buffer size, which is divisible by the -+ * bulk-in maxpacket size. -+ */ -+ bh->inreq->length = nread; -+ bh->state = BUF_STATE_FULL; -+ -+ /* If an error occurred, report it and its position */ -+ if (nread < amount) { -+ curlun->sense_data = SS_UNRECOVERED_READ_ERROR; -+ curlun->sense_data_info = file_offset >> curlun->blkbits; -+ curlun->info_valid = 1; -+ break; -+ } -+ -+ if (amount_left == 0) -+ break; // No more left to read -+ -+ /* Send this buffer and go read some more */ -+ bh->inreq->zero = 0; -+ start_transfer(fsg, fsg->bulk_in, bh->inreq, -+ &bh->inreq_busy, &bh->state); -+ fsg->next_buffhd_to_fill = bh->next; -+ } -+ -+ return -EIO; // No default reply -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int do_write(struct fsg_dev *fsg) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ u32 lba; -+ struct fsg_buffhd *bh; -+ int get_some_more; -+ u32 amount_left_to_req, amount_left_to_write; -+ loff_t usb_offset, file_offset, file_offset_tmp; -+ unsigned int amount; -+ ssize_t nwritten; -+ int rc; -+ -+ if (curlun->ro) { -+ curlun->sense_data = SS_WRITE_PROTECTED; -+ return -EINVAL; -+ } -+ spin_lock(&curlun->filp->f_lock); -+ curlun->filp->f_flags &= ~O_SYNC; // Default is not to wait -+ spin_unlock(&curlun->filp->f_lock); -+ -+ /* Get the starting Logical Block Address and check that it's -+ * not too big */ -+ if (fsg->cmnd[0] == WRITE_6) -+ lba = get_unaligned_be24(&fsg->cmnd[1]); -+ else { -+ lba = get_unaligned_be32(&fsg->cmnd[2]); -+ -+ /* We allow DPO (Disable Page Out = don't save data in the -+ * cache) and FUA (Force Unit Access = write directly to the -+ * medium). We don't implement DPO; we implement FUA by -+ * performing synchronous output. */ -+ if ((fsg->cmnd[1] & ~0x18) != 0) { -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ /* FUA */ -+ if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) { -+ spin_lock(&curlun->filp->f_lock); -+ curlun->filp->f_flags |= O_DSYNC; -+ spin_unlock(&curlun->filp->f_lock); -+ } -+ } -+ if (lba >= curlun->num_sectors) { -+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; -+ return -EINVAL; -+ } -+ -+ /* Carry out the file writes */ -+ get_some_more = 1; -+ file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; -+ amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd; -+ -+ while (amount_left_to_write > 0) { -+ -+ /* Queue a request for more data from the host */ -+ bh = fsg->next_buffhd_to_fill; -+ if (bh->state == BUF_STATE_EMPTY && get_some_more) { -+ -+ /* Figure out how much we want to get: -+ * Try to get the remaining amount, -+ * but not more than the buffer size. -+ */ -+ amount = min(amount_left_to_req, mod_data.buflen); -+ -+ /* Beyond the end of the backing file? */ -+ if (usb_offset >= curlun->file_length) { -+ get_some_more = 0; -+ curlun->sense_data = -+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; -+ curlun->sense_data_info = usb_offset >> curlun->blkbits; -+ curlun->info_valid = 1; -+ continue; -+ } -+ -+ /* Get the next buffer */ -+ usb_offset += amount; -+ fsg->usb_amount_left -= amount; -+ amount_left_to_req -= amount; -+ if (amount_left_to_req == 0) -+ get_some_more = 0; -+ -+ /* Except at the end of the transfer, amount will be -+ * equal to the buffer size, which is divisible by -+ * the bulk-out maxpacket size. -+ */ -+ set_bulk_out_req_length(fsg, bh, amount); -+ start_transfer(fsg, fsg->bulk_out, bh->outreq, -+ &bh->outreq_busy, &bh->state); -+ fsg->next_buffhd_to_fill = bh->next; -+ continue; -+ } -+ -+ /* Write the received data to the backing file */ -+ bh = fsg->next_buffhd_to_drain; -+ if (bh->state == BUF_STATE_EMPTY && !get_some_more) -+ break; // We stopped early -+ if (bh->state == BUF_STATE_FULL) { -+ smp_rmb(); -+ fsg->next_buffhd_to_drain = bh->next; -+ bh->state = BUF_STATE_EMPTY; -+ -+ /* Did something go wrong with the transfer? */ -+ if (bh->outreq->status != 0) { -+ curlun->sense_data = SS_COMMUNICATION_FAILURE; -+ curlun->sense_data_info = file_offset >> curlun->blkbits; -+ curlun->info_valid = 1; -+ break; -+ } -+ -+ amount = bh->outreq->actual; -+ if (curlun->file_length - file_offset < amount) { -+ LERROR(curlun, -+ "write %u @ %llu beyond end %llu\n", -+ amount, (unsigned long long) file_offset, -+ (unsigned long long) curlun->file_length); -+ amount = curlun->file_length - file_offset; -+ } -+ -+ /* Don't accept excess data. The spec doesn't say -+ * what to do in this case. We'll ignore the error. -+ */ -+ amount = min(amount, bh->bulk_out_intended_length); -+ -+ /* Don't write a partial block */ -+ amount = round_down(amount, curlun->blksize); -+ if (amount == 0) -+ goto empty_write; -+ -+ /* Perform the write */ -+ file_offset_tmp = file_offset; -+ nwritten = vfs_write(curlun->filp, -+ (char __user *) bh->buf, -+ amount, &file_offset_tmp); -+ VLDBG(curlun, "file write %u @ %llu -> %d\n", amount, -+ (unsigned long long) file_offset, -+ (int) nwritten); -+ if (signal_pending(current)) -+ return -EINTR; // Interrupted! -+ -+ if (nwritten < 0) { -+ LDBG(curlun, "error in file write: %d\n", -+ (int) nwritten); -+ nwritten = 0; -+ } else if (nwritten < amount) { -+ LDBG(curlun, "partial file write: %d/%u\n", -+ (int) nwritten, amount); -+ nwritten = round_down(nwritten, curlun->blksize); -+ } -+ file_offset += nwritten; -+ amount_left_to_write -= nwritten; -+ fsg->residue -= nwritten; -+ -+ /* If an error occurred, report it and its position */ -+ if (nwritten < amount) { -+ curlun->sense_data = SS_WRITE_ERROR; -+ curlun->sense_data_info = file_offset >> curlun->blkbits; -+ curlun->info_valid = 1; -+ break; -+ } -+ -+ empty_write: -+ /* Did the host decide to stop early? */ -+ if (bh->outreq->actual < bh->bulk_out_intended_length) { -+ fsg->short_packet_received = 1; -+ break; -+ } -+ continue; -+ } -+ -+ /* Wait for something to happen */ -+ rc = sleep_thread(fsg); -+ if (rc) -+ return rc; -+ } -+ -+ return -EIO; // No default reply -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int do_synchronize_cache(struct fsg_dev *fsg) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ int rc; -+ -+ /* We ignore the requested LBA and write out all file's -+ * dirty data buffers. */ -+ rc = fsg_lun_fsync_sub(curlun); -+ if (rc) -+ curlun->sense_data = SS_WRITE_ERROR; -+ return 0; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static void invalidate_sub(struct fsg_lun *curlun) -+{ -+ struct file *filp = curlun->filp; -+ struct inode *inode = filp->f_path.dentry->d_inode; -+ unsigned long rc; -+ -+ rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); -+ VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc); -+} -+ -+static int do_verify(struct fsg_dev *fsg) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ u32 lba; -+ u32 verification_length; -+ struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; -+ loff_t file_offset, file_offset_tmp; -+ u32 amount_left; -+ unsigned int amount; -+ ssize_t nread; -+ -+ /* Get the starting Logical Block Address and check that it's -+ * not too big */ -+ lba = get_unaligned_be32(&fsg->cmnd[2]); -+ if (lba >= curlun->num_sectors) { -+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; -+ return -EINVAL; -+ } -+ -+ /* We allow DPO (Disable Page Out = don't save data in the -+ * cache) but we don't implement it. */ -+ if ((fsg->cmnd[1] & ~0x10) != 0) { -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ -+ verification_length = get_unaligned_be16(&fsg->cmnd[7]); -+ if (unlikely(verification_length == 0)) -+ return -EIO; // No default reply -+ -+ /* Prepare to carry out the file verify */ -+ amount_left = verification_length << curlun->blkbits; -+ file_offset = ((loff_t) lba) << curlun->blkbits; -+ -+ /* Write out all the dirty buffers before invalidating them */ -+ fsg_lun_fsync_sub(curlun); -+ if (signal_pending(current)) -+ return -EINTR; -+ -+ invalidate_sub(curlun); -+ if (signal_pending(current)) -+ return -EINTR; -+ -+ /* Just try to read the requested blocks */ -+ while (amount_left > 0) { -+ -+ /* Figure out how much we need to read: -+ * Try to read the remaining amount, but not more than -+ * the buffer size. -+ * And don't try to read past the end of the file. -+ */ -+ amount = min((unsigned int) amount_left, mod_data.buflen); -+ amount = min((loff_t) amount, -+ curlun->file_length - file_offset); -+ if (amount == 0) { -+ curlun->sense_data = -+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; -+ curlun->sense_data_info = file_offset >> curlun->blkbits; -+ curlun->info_valid = 1; -+ break; -+ } -+ -+ /* Perform the read */ -+ file_offset_tmp = file_offset; -+ nread = vfs_read(curlun->filp, -+ (char __user *) bh->buf, -+ amount, &file_offset_tmp); -+ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, -+ (unsigned long long) file_offset, -+ (int) nread); -+ if (signal_pending(current)) -+ return -EINTR; -+ -+ if (nread < 0) { -+ LDBG(curlun, "error in file verify: %d\n", -+ (int) nread); -+ nread = 0; -+ } else if (nread < amount) { -+ LDBG(curlun, "partial file verify: %d/%u\n", -+ (int) nread, amount); -+ nread = round_down(nread, curlun->blksize); -+ } -+ if (nread == 0) { -+ curlun->sense_data = SS_UNRECOVERED_READ_ERROR; -+ curlun->sense_data_info = file_offset >> curlun->blkbits; -+ curlun->info_valid = 1; -+ break; -+ } -+ file_offset += nread; -+ amount_left -= nread; -+ } -+ return 0; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ u8 *buf = (u8 *) bh->buf; -+ -+ static char vendor_id[] = "Linux "; -+ static char product_disk_id[] = "File-Stor Gadget"; -+ static char product_cdrom_id[] = "File-CD Gadget "; -+ -+ if (!fsg->curlun) { // Unsupported LUNs are okay -+ fsg->bad_lun_okay = 1; -+ memset(buf, 0, 36); -+ buf[0] = 0x7f; // Unsupported, no device-type -+ buf[4] = 31; // Additional length -+ return 36; -+ } -+ -+ memset(buf, 0, 8); -+ buf[0] = (mod_data.cdrom ? TYPE_ROM : TYPE_DISK); -+ if (mod_data.removable) -+ buf[1] = 0x80; -+ buf[2] = 2; // ANSI SCSI level 2 -+ buf[3] = 2; // SCSI-2 INQUIRY data format -+ buf[4] = 31; // Additional length -+ // No special options -+ sprintf(buf + 8, "%-8s%-16s%04x", vendor_id, -+ (mod_data.cdrom ? product_cdrom_id : -+ product_disk_id), -+ mod_data.release); -+ return 36; -+} -+ -+ -+static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ u8 *buf = (u8 *) bh->buf; -+ u32 sd, sdinfo; -+ int valid; -+ -+ /* -+ * From the SCSI-2 spec., section 7.9 (Unit attention condition): -+ * -+ * If a REQUEST SENSE command is received from an initiator -+ * with a pending unit attention condition (before the target -+ * generates the contingent allegiance condition), then the -+ * target shall either: -+ * a) report any pending sense data and preserve the unit -+ * attention condition on the logical unit, or, -+ * b) report the unit attention condition, may discard any -+ * pending sense data, and clear the unit attention -+ * condition on the logical unit for that initiator. -+ * -+ * FSG normally uses option a); enable this code to use option b). -+ */ -+#if 0 -+ if (curlun && curlun->unit_attention_data != SS_NO_SENSE) { -+ curlun->sense_data = curlun->unit_attention_data; -+ curlun->unit_attention_data = SS_NO_SENSE; -+ } -+#endif -+ -+ if (!curlun) { // Unsupported LUNs are okay -+ fsg->bad_lun_okay = 1; -+ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; -+ sdinfo = 0; -+ valid = 0; -+ } else { -+ sd = curlun->sense_data; -+ sdinfo = curlun->sense_data_info; -+ valid = curlun->info_valid << 7; -+ curlun->sense_data = SS_NO_SENSE; -+ curlun->sense_data_info = 0; -+ curlun->info_valid = 0; -+ } -+ -+ memset(buf, 0, 18); -+ buf[0] = valid | 0x70; // Valid, current error -+ buf[2] = SK(sd); -+ put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */ -+ buf[7] = 18 - 8; // Additional sense length -+ buf[12] = ASC(sd); -+ buf[13] = ASCQ(sd); -+ return 18; -+} -+ -+ -+static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ u32 lba = get_unaligned_be32(&fsg->cmnd[2]); -+ int pmi = fsg->cmnd[8]; -+ u8 *buf = (u8 *) bh->buf; -+ -+ /* Check the PMI and LBA fields */ -+ if (pmi > 1 || (pmi == 0 && lba != 0)) { -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ -+ put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); -+ /* Max logical block */ -+ put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ -+ return 8; -+} -+ -+ -+static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ int msf = fsg->cmnd[1] & 0x02; -+ u32 lba = get_unaligned_be32(&fsg->cmnd[2]); -+ u8 *buf = (u8 *) bh->buf; -+ -+ if ((fsg->cmnd[1] & ~0x02) != 0) { /* Mask away MSF */ -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ if (lba >= curlun->num_sectors) { -+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; -+ return -EINVAL; -+ } -+ -+ memset(buf, 0, 8); -+ buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */ -+ store_cdrom_address(&buf[4], msf, lba); -+ return 8; -+} -+ -+ -+static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ int msf = fsg->cmnd[1] & 0x02; -+ int start_track = fsg->cmnd[6]; -+ u8 *buf = (u8 *) bh->buf; -+ -+ if ((fsg->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */ -+ start_track > 1) { -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ -+ memset(buf, 0, 20); -+ buf[1] = (20-2); /* TOC data length */ -+ buf[2] = 1; /* First track number */ -+ buf[3] = 1; /* Last track number */ -+ buf[5] = 0x16; /* Data track, copying allowed */ -+ buf[6] = 0x01; /* Only track is number 1 */ -+ store_cdrom_address(&buf[8], msf, 0); -+ -+ buf[13] = 0x16; /* Lead-out track is data */ -+ buf[14] = 0xAA; /* Lead-out track number */ -+ store_cdrom_address(&buf[16], msf, curlun->num_sectors); -+ return 20; -+} -+ -+ -+static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ int mscmnd = fsg->cmnd[0]; -+ u8 *buf = (u8 *) bh->buf; -+ u8 *buf0 = buf; -+ int pc, page_code; -+ int changeable_values, all_pages; -+ int valid_page = 0; -+ int len, limit; -+ -+ if ((fsg->cmnd[1] & ~0x08) != 0) { // Mask away DBD -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ pc = fsg->cmnd[2] >> 6; -+ page_code = fsg->cmnd[2] & 0x3f; -+ if (pc == 3) { -+ curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED; -+ return -EINVAL; -+ } -+ changeable_values = (pc == 1); -+ all_pages = (page_code == 0x3f); -+ -+ /* Write the mode parameter header. Fixed values are: default -+ * medium type, no cache control (DPOFUA), and no block descriptors. -+ * The only variable value is the WriteProtect bit. We will fill in -+ * the mode data length later. */ -+ memset(buf, 0, 8); -+ if (mscmnd == MODE_SENSE) { -+ buf[2] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA -+ buf += 4; -+ limit = 255; -+ } else { // MODE_SENSE_10 -+ buf[3] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA -+ buf += 8; -+ limit = 65535; // Should really be mod_data.buflen -+ } -+ -+ /* No block descriptors */ -+ -+ /* The mode pages, in numerical order. The only page we support -+ * is the Caching page. */ -+ if (page_code == 0x08 || all_pages) { -+ valid_page = 1; -+ buf[0] = 0x08; // Page code -+ buf[1] = 10; // Page length -+ memset(buf+2, 0, 10); // None of the fields are changeable -+ -+ if (!changeable_values) { -+ buf[2] = 0x04; // Write cache enable, -+ // Read cache not disabled -+ // No cache retention priorities -+ put_unaligned_be16(0xffff, &buf[4]); -+ /* Don't disable prefetch */ -+ /* Minimum prefetch = 0 */ -+ put_unaligned_be16(0xffff, &buf[8]); -+ /* Maximum prefetch */ -+ put_unaligned_be16(0xffff, &buf[10]); -+ /* Maximum prefetch ceiling */ -+ } -+ buf += 12; -+ } -+ -+ /* Check that a valid page was requested and the mode data length -+ * isn't too long. */ -+ len = buf - buf0; -+ if (!valid_page || len > limit) { -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ -+ /* Store the mode data length */ -+ if (mscmnd == MODE_SENSE) -+ buf0[0] = len - 1; -+ else -+ put_unaligned_be16(len - 2, buf0); -+ return len; -+} -+ -+ -+static int do_start_stop(struct fsg_dev *fsg) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ int loej, start; -+ -+ if (!mod_data.removable) { -+ curlun->sense_data = SS_INVALID_COMMAND; -+ return -EINVAL; -+ } -+ -+ // int immed = fsg->cmnd[1] & 0x01; -+ loej = fsg->cmnd[4] & 0x02; -+ start = fsg->cmnd[4] & 0x01; -+ -+#ifdef CONFIG_USB_FILE_STORAGE_TEST -+ if ((fsg->cmnd[1] & ~0x01) != 0 || // Mask away Immed -+ (fsg->cmnd[4] & ~0x03) != 0) { // Mask LoEj, Start -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ -+ if (!start) { -+ -+ /* Are we allowed to unload the media? */ -+ if (curlun->prevent_medium_removal) { -+ LDBG(curlun, "unload attempt prevented\n"); -+ curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; -+ return -EINVAL; -+ } -+ if (loej) { // Simulate an unload/eject -+ up_read(&fsg->filesem); -+ down_write(&fsg->filesem); -+ fsg_lun_close(curlun); -+ up_write(&fsg->filesem); -+ down_read(&fsg->filesem); -+ } -+ } else { -+ -+ /* Our emulation doesn't support mounting; the medium is -+ * available for use as soon as it is loaded. */ -+ if (!fsg_lun_is_open(curlun)) { -+ curlun->sense_data = SS_MEDIUM_NOT_PRESENT; -+ return -EINVAL; -+ } -+ } -+#endif -+ return 0; -+} -+ -+ -+static int do_prevent_allow(struct fsg_dev *fsg) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ int prevent; -+ -+ if (!mod_data.removable) { -+ curlun->sense_data = SS_INVALID_COMMAND; -+ return -EINVAL; -+ } -+ -+ prevent = fsg->cmnd[4] & 0x01; -+ if ((fsg->cmnd[4] & ~0x01) != 0) { // Mask away Prevent -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ -+ if (curlun->prevent_medium_removal && !prevent) -+ fsg_lun_fsync_sub(curlun); -+ curlun->prevent_medium_removal = prevent; -+ return 0; -+} -+ -+ -+static int do_read_format_capacities(struct fsg_dev *fsg, -+ struct fsg_buffhd *bh) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ u8 *buf = (u8 *) bh->buf; -+ -+ buf[0] = buf[1] = buf[2] = 0; -+ buf[3] = 8; // Only the Current/Maximum Capacity Descriptor -+ buf += 4; -+ -+ put_unaligned_be32(curlun->num_sectors, &buf[0]); -+ /* Number of blocks */ -+ put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ -+ buf[4] = 0x02; /* Current capacity */ -+ return 12; -+} -+ -+ -+static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ -+ /* We don't support MODE SELECT */ -+ curlun->sense_data = SS_INVALID_COMMAND; -+ return -EINVAL; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int halt_bulk_in_endpoint(struct fsg_dev *fsg) -+{ -+ int rc; -+ -+ rc = fsg_set_halt(fsg, fsg->bulk_in); -+ if (rc == -EAGAIN) -+ VDBG(fsg, "delayed bulk-in endpoint halt\n"); -+ while (rc != 0) { -+ if (rc != -EAGAIN) { -+ WARNING(fsg, "usb_ep_set_halt -> %d\n", rc); -+ rc = 0; -+ break; -+ } -+ -+ /* Wait for a short time and then try again */ -+ if (msleep_interruptible(100) != 0) -+ return -EINTR; -+ rc = usb_ep_set_halt(fsg->bulk_in); -+ } -+ return rc; -+} -+ -+static int wedge_bulk_in_endpoint(struct fsg_dev *fsg) -+{ -+ int rc; -+ -+ DBG(fsg, "bulk-in set wedge\n"); -+ rc = usb_ep_set_wedge(fsg->bulk_in); -+ if (rc == -EAGAIN) -+ VDBG(fsg, "delayed bulk-in endpoint wedge\n"); -+ while (rc != 0) { -+ if (rc != -EAGAIN) { -+ WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc); -+ rc = 0; -+ break; -+ } -+ -+ /* Wait for a short time and then try again */ -+ if (msleep_interruptible(100) != 0) -+ return -EINTR; -+ rc = usb_ep_set_wedge(fsg->bulk_in); -+ } -+ return rc; -+} -+ -+static int throw_away_data(struct fsg_dev *fsg) -+{ -+ struct fsg_buffhd *bh; -+ u32 amount; -+ int rc; -+ -+ while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY || -+ fsg->usb_amount_left > 0) { -+ -+ /* Throw away the data in a filled buffer */ -+ if (bh->state == BUF_STATE_FULL) { -+ smp_rmb(); -+ bh->state = BUF_STATE_EMPTY; -+ fsg->next_buffhd_to_drain = bh->next; -+ -+ /* A short packet or an error ends everything */ -+ if (bh->outreq->actual < bh->bulk_out_intended_length || -+ bh->outreq->status != 0) { -+ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); -+ return -EINTR; -+ } -+ continue; -+ } -+ -+ /* Try to submit another request if we need one */ -+ bh = fsg->next_buffhd_to_fill; -+ if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) { -+ amount = min(fsg->usb_amount_left, -+ (u32) mod_data.buflen); -+ -+ /* Except at the end of the transfer, amount will be -+ * equal to the buffer size, which is divisible by -+ * the bulk-out maxpacket size. -+ */ -+ set_bulk_out_req_length(fsg, bh, amount); -+ start_transfer(fsg, fsg->bulk_out, bh->outreq, -+ &bh->outreq_busy, &bh->state); -+ fsg->next_buffhd_to_fill = bh->next; -+ fsg->usb_amount_left -= amount; -+ continue; -+ } -+ -+ /* Otherwise wait for something to happen */ -+ rc = sleep_thread(fsg); -+ if (rc) -+ return rc; -+ } -+ return 0; -+} -+ -+ -+static int finish_reply(struct fsg_dev *fsg) -+{ -+ struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; -+ int rc = 0; -+ -+ switch (fsg->data_dir) { -+ case DATA_DIR_NONE: -+ break; // Nothing to send -+ -+ /* If we don't know whether the host wants to read or write, -+ * this must be CB or CBI with an unknown command. We mustn't -+ * try to send or receive any data. So stall both bulk pipes -+ * if we can and wait for a reset. */ -+ case DATA_DIR_UNKNOWN: -+ if (mod_data.can_stall) { -+ fsg_set_halt(fsg, fsg->bulk_out); -+ rc = halt_bulk_in_endpoint(fsg); -+ } -+ break; -+ -+ /* All but the last buffer of data must have already been sent */ -+ case DATA_DIR_TO_HOST: -+ if (fsg->data_size == 0) -+ ; // Nothing to send -+ -+ /* If there's no residue, simply send the last buffer */ -+ else if (fsg->residue == 0) { -+ bh->inreq->zero = 0; -+ start_transfer(fsg, fsg->bulk_in, bh->inreq, -+ &bh->inreq_busy, &bh->state); -+ fsg->next_buffhd_to_fill = bh->next; -+ } -+ -+ /* There is a residue. For CB and CBI, simply mark the end -+ * of the data with a short packet. However, if we are -+ * allowed to stall, there was no data at all (residue == -+ * data_size), and the command failed (invalid LUN or -+ * sense data is set), then halt the bulk-in endpoint -+ * instead. */ -+ else if (!transport_is_bbb()) { -+ if (mod_data.can_stall && -+ fsg->residue == fsg->data_size && -+ (!fsg->curlun || fsg->curlun->sense_data != SS_NO_SENSE)) { -+ bh->state = BUF_STATE_EMPTY; -+ rc = halt_bulk_in_endpoint(fsg); -+ } else { -+ bh->inreq->zero = 1; -+ start_transfer(fsg, fsg->bulk_in, bh->inreq, -+ &bh->inreq_busy, &bh->state); -+ fsg->next_buffhd_to_fill = bh->next; -+ } -+ } -+ -+ /* -+ * For Bulk-only, mark the end of the data with a short -+ * packet. If we are allowed to stall, halt the bulk-in -+ * endpoint. (Note: This violates the Bulk-Only Transport -+ * specification, which requires us to pad the data if we -+ * don't halt the endpoint. Presumably nobody will mind.) -+ */ -+ else { -+ bh->inreq->zero = 1; -+ start_transfer(fsg, fsg->bulk_in, bh->inreq, -+ &bh->inreq_busy, &bh->state); -+ fsg->next_buffhd_to_fill = bh->next; -+ if (mod_data.can_stall) -+ rc = halt_bulk_in_endpoint(fsg); -+ } -+ break; -+ -+ /* We have processed all we want from the data the host has sent. -+ * There may still be outstanding bulk-out requests. */ -+ case DATA_DIR_FROM_HOST: -+ if (fsg->residue == 0) -+ ; // Nothing to receive -+ -+ /* Did the host stop sending unexpectedly early? */ -+ else if (fsg->short_packet_received) { -+ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); -+ rc = -EINTR; -+ } -+ -+ /* We haven't processed all the incoming data. Even though -+ * we may be allowed to stall, doing so would cause a race. -+ * The controller may already have ACK'ed all the remaining -+ * bulk-out packets, in which case the host wouldn't see a -+ * STALL. Not realizing the endpoint was halted, it wouldn't -+ * clear the halt -- leading to problems later on. */ -+#if 0 -+ else if (mod_data.can_stall) { -+ fsg_set_halt(fsg, fsg->bulk_out); -+ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); -+ rc = -EINTR; -+ } -+#endif -+ -+ /* We can't stall. Read in the excess data and throw it -+ * all away. */ -+ else -+ rc = throw_away_data(fsg); -+ break; -+ } -+ return rc; -+} -+ -+ -+static int send_status(struct fsg_dev *fsg) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ struct fsg_buffhd *bh; -+ int rc; -+ u8 status = US_BULK_STAT_OK; -+ u32 sd, sdinfo = 0; -+ -+ /* Wait for the next buffer to become available */ -+ bh = fsg->next_buffhd_to_fill; -+ while (bh->state != BUF_STATE_EMPTY) { -+ rc = sleep_thread(fsg); -+ if (rc) -+ return rc; -+ } -+ -+ if (curlun) { -+ sd = curlun->sense_data; -+ sdinfo = curlun->sense_data_info; -+ } else if (fsg->bad_lun_okay) -+ sd = SS_NO_SENSE; -+ else -+ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; -+ -+ if (fsg->phase_error) { -+ DBG(fsg, "sending phase-error status\n"); -+ status = US_BULK_STAT_PHASE; -+ sd = SS_INVALID_COMMAND; -+ } else if (sd != SS_NO_SENSE) { -+ DBG(fsg, "sending command-failure status\n"); -+ status = US_BULK_STAT_FAIL; -+ VDBG(fsg, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;" -+ " info x%x\n", -+ SK(sd), ASC(sd), ASCQ(sd), sdinfo); -+ } -+ -+ if (transport_is_bbb()) { -+ struct bulk_cs_wrap *csw = bh->buf; -+ -+ /* Store and send the Bulk-only CSW */ -+ csw->Signature = cpu_to_le32(US_BULK_CS_SIGN); -+ csw->Tag = fsg->tag; -+ csw->Residue = cpu_to_le32(fsg->residue); -+ csw->Status = status; -+ -+ bh->inreq->length = US_BULK_CS_WRAP_LEN; -+ bh->inreq->zero = 0; -+ start_transfer(fsg, fsg->bulk_in, bh->inreq, -+ &bh->inreq_busy, &bh->state); -+ -+ } else if (mod_data.transport_type == USB_PR_CB) { -+ -+ /* Control-Bulk transport has no status phase! */ -+ return 0; -+ -+ } else { // USB_PR_CBI -+ struct interrupt_data *buf = bh->buf; -+ -+ /* Store and send the Interrupt data. UFI sends the ASC -+ * and ASCQ bytes. Everything else sends a Type (which -+ * is always 0) and the status Value. */ -+ if (mod_data.protocol_type == USB_SC_UFI) { -+ buf->bType = ASC(sd); -+ buf->bValue = ASCQ(sd); -+ } else { -+ buf->bType = 0; -+ buf->bValue = status; -+ } -+ fsg->intreq->length = CBI_INTERRUPT_DATA_LEN; -+ -+ fsg->intr_buffhd = bh; // Point to the right buffhd -+ fsg->intreq->buf = bh->inreq->buf; -+ fsg->intreq->context = bh; -+ start_transfer(fsg, fsg->intr_in, fsg->intreq, -+ &fsg->intreq_busy, &bh->state); -+ } -+ -+ fsg->next_buffhd_to_fill = bh->next; -+ return 0; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* Check whether the command is properly formed and whether its data size -+ * and direction agree with the values we already have. */ -+static int check_command(struct fsg_dev *fsg, int cmnd_size, -+ enum data_direction data_dir, unsigned int mask, -+ int needs_medium, const char *name) -+{ -+ int i; -+ int lun = fsg->cmnd[1] >> 5; -+ static const char dirletter[4] = {'u', 'o', 'i', 'n'}; -+ char hdlen[20]; -+ struct fsg_lun *curlun; -+ -+ /* Adjust the expected cmnd_size for protocol encapsulation padding. -+ * Transparent SCSI doesn't pad. */ -+ if (protocol_is_scsi()) -+ ; -+ -+ /* There's some disagreement as to whether RBC pads commands or not. -+ * We'll play it safe and accept either form. */ -+ else if (mod_data.protocol_type == USB_SC_RBC) { -+ if (fsg->cmnd_size == 12) -+ cmnd_size = 12; -+ -+ /* All the other protocols pad to 12 bytes */ -+ } else -+ cmnd_size = 12; -+ -+ hdlen[0] = 0; -+ if (fsg->data_dir != DATA_DIR_UNKNOWN) -+ sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir], -+ fsg->data_size); -+ VDBG(fsg, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n", -+ name, cmnd_size, dirletter[(int) data_dir], -+ fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen); -+ -+ /* We can't reply at all until we know the correct data direction -+ * and size. */ -+ if (fsg->data_size_from_cmnd == 0) -+ data_dir = DATA_DIR_NONE; -+ if (fsg->data_dir == DATA_DIR_UNKNOWN) { // CB or CBI -+ fsg->data_dir = data_dir; -+ fsg->data_size = fsg->data_size_from_cmnd; -+ -+ } else { // Bulk-only -+ if (fsg->data_size < fsg->data_size_from_cmnd) { -+ -+ /* Host data size < Device data size is a phase error. -+ * Carry out the command, but only transfer as much -+ * as we are allowed. */ -+ fsg->data_size_from_cmnd = fsg->data_size; -+ fsg->phase_error = 1; -+ } -+ } -+ fsg->residue = fsg->usb_amount_left = fsg->data_size; -+ -+ /* Conflicting data directions is a phase error */ -+ if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) { -+ fsg->phase_error = 1; -+ return -EINVAL; -+ } -+ -+ /* Verify the length of the command itself */ -+ if (cmnd_size != fsg->cmnd_size) { -+ -+ /* Special case workaround: There are plenty of buggy SCSI -+ * implementations. Many have issues with cbw->Length -+ * field passing a wrong command size. For those cases we -+ * always try to work around the problem by using the length -+ * sent by the host side provided it is at least as large -+ * as the correct command length. -+ * Examples of such cases would be MS-Windows, which issues -+ * REQUEST SENSE with cbw->Length == 12 where it should -+ * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and -+ * REQUEST SENSE with cbw->Length == 10 where it should -+ * be 6 as well. -+ */ -+ if (cmnd_size <= fsg->cmnd_size) { -+ DBG(fsg, "%s is buggy! Expected length %d " -+ "but we got %d\n", name, -+ cmnd_size, fsg->cmnd_size); -+ cmnd_size = fsg->cmnd_size; -+ } else { -+ fsg->phase_error = 1; -+ return -EINVAL; -+ } -+ } -+ -+ /* Check that the LUN values are consistent */ -+ if (transport_is_bbb()) { -+ if (fsg->lun != lun) -+ DBG(fsg, "using LUN %d from CBW, " -+ "not LUN %d from CDB\n", -+ fsg->lun, lun); -+ } -+ -+ /* Check the LUN */ -+ curlun = fsg->curlun; -+ if (curlun) { -+ if (fsg->cmnd[0] != REQUEST_SENSE) { -+ curlun->sense_data = SS_NO_SENSE; -+ curlun->sense_data_info = 0; -+ curlun->info_valid = 0; -+ } -+ } else { -+ fsg->bad_lun_okay = 0; -+ -+ /* INQUIRY and REQUEST SENSE commands are explicitly allowed -+ * to use unsupported LUNs; all others may not. */ -+ if (fsg->cmnd[0] != INQUIRY && -+ fsg->cmnd[0] != REQUEST_SENSE) { -+ DBG(fsg, "unsupported LUN %d\n", fsg->lun); -+ return -EINVAL; -+ } -+ } -+ -+ /* If a unit attention condition exists, only INQUIRY and -+ * REQUEST SENSE commands are allowed; anything else must fail. */ -+ if (curlun && curlun->unit_attention_data != SS_NO_SENSE && -+ fsg->cmnd[0] != INQUIRY && -+ fsg->cmnd[0] != REQUEST_SENSE) { -+ curlun->sense_data = curlun->unit_attention_data; -+ curlun->unit_attention_data = SS_NO_SENSE; -+ return -EINVAL; -+ } -+ -+ /* Check that only command bytes listed in the mask are non-zero */ -+ fsg->cmnd[1] &= 0x1f; // Mask away the LUN -+ for (i = 1; i < cmnd_size; ++i) { -+ if (fsg->cmnd[i] && !(mask & (1 << i))) { -+ if (curlun) -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ } -+ -+ /* If the medium isn't mounted and the command needs to access -+ * it, return an error. */ -+ if (curlun && !fsg_lun_is_open(curlun) && needs_medium) { -+ curlun->sense_data = SS_MEDIUM_NOT_PRESENT; -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+/* wrapper of check_command for data size in blocks handling */ -+static int check_command_size_in_blocks(struct fsg_dev *fsg, int cmnd_size, -+ enum data_direction data_dir, unsigned int mask, -+ int needs_medium, const char *name) -+{ -+ if (fsg->curlun) -+ fsg->data_size_from_cmnd <<= fsg->curlun->blkbits; -+ return check_command(fsg, cmnd_size, data_dir, -+ mask, needs_medium, name); -+} -+ -+static int do_scsi_command(struct fsg_dev *fsg) -+{ -+ struct fsg_buffhd *bh; -+ int rc; -+ int reply = -EINVAL; -+ int i; -+ static char unknown[16]; -+ -+ dump_cdb(fsg); -+ -+ /* Wait for the next buffer to become available for data or status */ -+ bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill; -+ while (bh->state != BUF_STATE_EMPTY) { -+ rc = sleep_thread(fsg); -+ if (rc) -+ return rc; -+ } -+ fsg->phase_error = 0; -+ fsg->short_packet_received = 0; -+ -+ down_read(&fsg->filesem); // We're using the backing file -+ switch (fsg->cmnd[0]) { -+ -+ case INQUIRY: -+ fsg->data_size_from_cmnd = fsg->cmnd[4]; -+ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, -+ (1<<4), 0, -+ "INQUIRY")) == 0) -+ reply = do_inquiry(fsg, bh); -+ break; -+ -+ case MODE_SELECT: -+ fsg->data_size_from_cmnd = fsg->cmnd[4]; -+ if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST, -+ (1<<1) | (1<<4), 0, -+ "MODE SELECT(6)")) == 0) -+ reply = do_mode_select(fsg, bh); -+ break; -+ -+ case MODE_SELECT_10: -+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); -+ if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST, -+ (1<<1) | (3<<7), 0, -+ "MODE SELECT(10)")) == 0) -+ reply = do_mode_select(fsg, bh); -+ break; -+ -+ case MODE_SENSE: -+ fsg->data_size_from_cmnd = fsg->cmnd[4]; -+ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, -+ (1<<1) | (1<<2) | (1<<4), 0, -+ "MODE SENSE(6)")) == 0) -+ reply = do_mode_sense(fsg, bh); -+ break; -+ -+ case MODE_SENSE_10: -+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); -+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, -+ (1<<1) | (1<<2) | (3<<7), 0, -+ "MODE SENSE(10)")) == 0) -+ reply = do_mode_sense(fsg, bh); -+ break; -+ -+ case ALLOW_MEDIUM_REMOVAL: -+ fsg->data_size_from_cmnd = 0; -+ if ((reply = check_command(fsg, 6, DATA_DIR_NONE, -+ (1<<4), 0, -+ "PREVENT-ALLOW MEDIUM REMOVAL")) == 0) -+ reply = do_prevent_allow(fsg); -+ break; -+ -+ case READ_6: -+ i = fsg->cmnd[4]; -+ fsg->data_size_from_cmnd = (i == 0) ? 256 : i; -+ if ((reply = check_command_size_in_blocks(fsg, 6, -+ DATA_DIR_TO_HOST, -+ (7<<1) | (1<<4), 1, -+ "READ(6)")) == 0) -+ reply = do_read(fsg); -+ break; -+ -+ case READ_10: -+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); -+ if ((reply = check_command_size_in_blocks(fsg, 10, -+ DATA_DIR_TO_HOST, -+ (1<<1) | (0xf<<2) | (3<<7), 1, -+ "READ(10)")) == 0) -+ reply = do_read(fsg); -+ break; -+ -+ case READ_12: -+ fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]); -+ if ((reply = check_command_size_in_blocks(fsg, 12, -+ DATA_DIR_TO_HOST, -+ (1<<1) | (0xf<<2) | (0xf<<6), 1, -+ "READ(12)")) == 0) -+ reply = do_read(fsg); -+ break; -+ -+ case READ_CAPACITY: -+ fsg->data_size_from_cmnd = 8; -+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, -+ (0xf<<2) | (1<<8), 1, -+ "READ CAPACITY")) == 0) -+ reply = do_read_capacity(fsg, bh); -+ break; -+ -+ case READ_HEADER: -+ if (!mod_data.cdrom) -+ goto unknown_cmnd; -+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); -+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, -+ (3<<7) | (0x1f<<1), 1, -+ "READ HEADER")) == 0) -+ reply = do_read_header(fsg, bh); -+ break; -+ -+ case READ_TOC: -+ if (!mod_data.cdrom) -+ goto unknown_cmnd; -+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); -+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, -+ (7<<6) | (1<<1), 1, -+ "READ TOC")) == 0) -+ reply = do_read_toc(fsg, bh); -+ break; -+ -+ case READ_FORMAT_CAPACITIES: -+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); -+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, -+ (3<<7), 1, -+ "READ FORMAT CAPACITIES")) == 0) -+ reply = do_read_format_capacities(fsg, bh); -+ break; -+ -+ case REQUEST_SENSE: -+ fsg->data_size_from_cmnd = fsg->cmnd[4]; -+ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, -+ (1<<4), 0, -+ "REQUEST SENSE")) == 0) -+ reply = do_request_sense(fsg, bh); -+ break; -+ -+ case START_STOP: -+ fsg->data_size_from_cmnd = 0; -+ if ((reply = check_command(fsg, 6, DATA_DIR_NONE, -+ (1<<1) | (1<<4), 0, -+ "START-STOP UNIT")) == 0) -+ reply = do_start_stop(fsg); -+ break; -+ -+ case SYNCHRONIZE_CACHE: -+ fsg->data_size_from_cmnd = 0; -+ if ((reply = check_command(fsg, 10, DATA_DIR_NONE, -+ (0xf<<2) | (3<<7), 1, -+ "SYNCHRONIZE CACHE")) == 0) -+ reply = do_synchronize_cache(fsg); -+ break; -+ -+ case TEST_UNIT_READY: -+ fsg->data_size_from_cmnd = 0; -+ reply = check_command(fsg, 6, DATA_DIR_NONE, -+ 0, 1, -+ "TEST UNIT READY"); -+ break; -+ -+ /* Although optional, this command is used by MS-Windows. We -+ * support a minimal version: BytChk must be 0. */ -+ case VERIFY: -+ fsg->data_size_from_cmnd = 0; -+ if ((reply = check_command(fsg, 10, DATA_DIR_NONE, -+ (1<<1) | (0xf<<2) | (3<<7), 1, -+ "VERIFY")) == 0) -+ reply = do_verify(fsg); -+ break; -+ -+ case WRITE_6: -+ i = fsg->cmnd[4]; -+ fsg->data_size_from_cmnd = (i == 0) ? 256 : i; -+ if ((reply = check_command_size_in_blocks(fsg, 6, -+ DATA_DIR_FROM_HOST, -+ (7<<1) | (1<<4), 1, -+ "WRITE(6)")) == 0) -+ reply = do_write(fsg); -+ break; -+ -+ case WRITE_10: -+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); -+ if ((reply = check_command_size_in_blocks(fsg, 10, -+ DATA_DIR_FROM_HOST, -+ (1<<1) | (0xf<<2) | (3<<7), 1, -+ "WRITE(10)")) == 0) -+ reply = do_write(fsg); -+ break; -+ -+ case WRITE_12: -+ fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]); -+ if ((reply = check_command_size_in_blocks(fsg, 12, -+ DATA_DIR_FROM_HOST, -+ (1<<1) | (0xf<<2) | (0xf<<6), 1, -+ "WRITE(12)")) == 0) -+ reply = do_write(fsg); -+ break; -+ -+ /* Some mandatory commands that we recognize but don't implement. -+ * They don't mean much in this setting. It's left as an exercise -+ * for anyone interested to implement RESERVE and RELEASE in terms -+ * of Posix locks. */ -+ case FORMAT_UNIT: -+ case RELEASE: -+ case RESERVE: -+ case SEND_DIAGNOSTIC: -+ // Fall through -+ -+ default: -+ unknown_cmnd: -+ fsg->data_size_from_cmnd = 0; -+ sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]); -+ if ((reply = check_command(fsg, fsg->cmnd_size, -+ DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) { -+ fsg->curlun->sense_data = SS_INVALID_COMMAND; -+ reply = -EINVAL; -+ } -+ break; -+ } -+ up_read(&fsg->filesem); -+ -+ if (reply == -EINTR || signal_pending(current)) -+ return -EINTR; -+ -+ /* Set up the single reply buffer for finish_reply() */ -+ if (reply == -EINVAL) -+ reply = 0; // Error reply length -+ if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) { -+ reply = min((u32) reply, fsg->data_size_from_cmnd); -+ bh->inreq->length = reply; -+ bh->state = BUF_STATE_FULL; -+ fsg->residue -= reply; -+ } // Otherwise it's already set -+ -+ return 0; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ struct usb_request *req = bh->outreq; -+ struct bulk_cb_wrap *cbw = req->buf; -+ -+ /* Was this a real packet? Should it be ignored? */ -+ if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) -+ return -EINVAL; -+ -+ /* Is the CBW valid? */ -+ if (req->actual != US_BULK_CB_WRAP_LEN || -+ cbw->Signature != cpu_to_le32( -+ US_BULK_CB_SIGN)) { -+ DBG(fsg, "invalid CBW: len %u sig 0x%x\n", -+ req->actual, -+ le32_to_cpu(cbw->Signature)); -+ -+ /* The Bulk-only spec says we MUST stall the IN endpoint -+ * (6.6.1), so it's unavoidable. It also says we must -+ * retain this state until the next reset, but there's -+ * no way to tell the controller driver it should ignore -+ * Clear-Feature(HALT) requests. -+ * -+ * We aren't required to halt the OUT endpoint; instead -+ * we can simply accept and discard any data received -+ * until the next reset. */ -+ wedge_bulk_in_endpoint(fsg); -+ set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); -+ return -EINVAL; -+ } -+ -+ /* Is the CBW meaningful? */ -+ if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN || -+ cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) { -+ DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " -+ "cmdlen %u\n", -+ cbw->Lun, cbw->Flags, cbw->Length); -+ -+ /* We can do anything we want here, so let's stall the -+ * bulk pipes if we are allowed to. */ -+ if (mod_data.can_stall) { -+ fsg_set_halt(fsg, fsg->bulk_out); -+ halt_bulk_in_endpoint(fsg); -+ } -+ return -EINVAL; -+ } -+ -+ /* Save the command for later */ -+ fsg->cmnd_size = cbw->Length; -+ memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size); -+ if (cbw->Flags & US_BULK_FLAG_IN) -+ fsg->data_dir = DATA_DIR_TO_HOST; -+ else -+ fsg->data_dir = DATA_DIR_FROM_HOST; -+ fsg->data_size = le32_to_cpu(cbw->DataTransferLength); -+ if (fsg->data_size == 0) -+ fsg->data_dir = DATA_DIR_NONE; -+ fsg->lun = cbw->Lun; -+ fsg->tag = cbw->Tag; -+ return 0; -+} -+ -+ -+static int get_next_command(struct fsg_dev *fsg) -+{ -+ struct fsg_buffhd *bh; -+ int rc = 0; -+ -+ if (transport_is_bbb()) { -+ -+ /* Wait for the next buffer to become available */ -+ bh = fsg->next_buffhd_to_fill; -+ while (bh->state != BUF_STATE_EMPTY) { -+ rc = sleep_thread(fsg); -+ if (rc) -+ return rc; -+ } -+ -+ /* Queue a request to read a Bulk-only CBW */ -+ set_bulk_out_req_length(fsg, bh, US_BULK_CB_WRAP_LEN); -+ start_transfer(fsg, fsg->bulk_out, bh->outreq, -+ &bh->outreq_busy, &bh->state); -+ -+ /* We will drain the buffer in software, which means we -+ * can reuse it for the next filling. No need to advance -+ * next_buffhd_to_fill. */ -+ -+ /* Wait for the CBW to arrive */ -+ while (bh->state != BUF_STATE_FULL) { -+ rc = sleep_thread(fsg); -+ if (rc) -+ return rc; -+ } -+ smp_rmb(); -+ rc = received_cbw(fsg, bh); -+ bh->state = BUF_STATE_EMPTY; -+ -+ } else { // USB_PR_CB or USB_PR_CBI -+ -+ /* Wait for the next command to arrive */ -+ while (fsg->cbbuf_cmnd_size == 0) { -+ rc = sleep_thread(fsg); -+ if (rc) -+ return rc; -+ } -+ -+ /* Is the previous status interrupt request still busy? -+ * The host is allowed to skip reading the status, -+ * so we must cancel it. */ -+ if (fsg->intreq_busy) -+ usb_ep_dequeue(fsg->intr_in, fsg->intreq); -+ -+ /* Copy the command and mark the buffer empty */ -+ fsg->data_dir = DATA_DIR_UNKNOWN; -+ spin_lock_irq(&fsg->lock); -+ fsg->cmnd_size = fsg->cbbuf_cmnd_size; -+ memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size); -+ fsg->cbbuf_cmnd_size = 0; -+ spin_unlock_irq(&fsg->lock); -+ -+ /* Use LUN from the command */ -+ fsg->lun = fsg->cmnd[1] >> 5; -+ } -+ -+ /* Update current lun */ -+ if (fsg->lun >= 0 && fsg->lun < fsg->nluns) -+ fsg->curlun = &fsg->luns[fsg->lun]; -+ else -+ fsg->curlun = NULL; -+ -+ return rc; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep, -+ const struct usb_endpoint_descriptor *d) -+{ -+ int rc; -+ -+ ep->driver_data = fsg; -+ ep->desc = d; -+ rc = usb_ep_enable(ep); -+ if (rc) -+ ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc); -+ return rc; -+} -+ -+static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep, -+ struct usb_request **preq) -+{ -+ *preq = usb_ep_alloc_request(ep, GFP_ATOMIC); -+ if (*preq) -+ return 0; -+ ERROR(fsg, "can't allocate request for %s\n", ep->name); -+ return -ENOMEM; -+} -+ -+/* -+ * Reset interface setting and re-init endpoint state (toggle etc). -+ * Call with altsetting < 0 to disable the interface. The only other -+ * available altsetting is 0, which enables the interface. -+ */ -+static int do_set_interface(struct fsg_dev *fsg, int altsetting) -+{ -+ int rc = 0; -+ int i; -+ const struct usb_endpoint_descriptor *d; -+ -+ if (fsg->running) -+ DBG(fsg, "reset interface\n"); -+ -+reset: -+ /* Deallocate the requests */ -+ for (i = 0; i < fsg_num_buffers; ++i) { -+ struct fsg_buffhd *bh = &fsg->buffhds[i]; -+ -+ if (bh->inreq) { -+ usb_ep_free_request(fsg->bulk_in, bh->inreq); -+ bh->inreq = NULL; -+ } -+ if (bh->outreq) { -+ usb_ep_free_request(fsg->bulk_out, bh->outreq); -+ bh->outreq = NULL; -+ } -+ } -+ if (fsg->intreq) { -+ usb_ep_free_request(fsg->intr_in, fsg->intreq); -+ fsg->intreq = NULL; -+ } -+ -+ /* Disable the endpoints */ -+ if (fsg->bulk_in_enabled) { -+ usb_ep_disable(fsg->bulk_in); -+ fsg->bulk_in_enabled = 0; -+ } -+ if (fsg->bulk_out_enabled) { -+ usb_ep_disable(fsg->bulk_out); -+ fsg->bulk_out_enabled = 0; -+ } -+ if (fsg->intr_in_enabled) { -+ usb_ep_disable(fsg->intr_in); -+ fsg->intr_in_enabled = 0; -+ } -+ -+ fsg->running = 0; -+ if (altsetting < 0 || rc != 0) -+ return rc; -+ -+ DBG(fsg, "set interface %d\n", altsetting); -+ -+ /* Enable the endpoints */ -+ d = fsg_ep_desc(fsg->gadget, -+ &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc, -+ &fsg_ss_bulk_in_desc); -+ if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0) -+ goto reset; -+ fsg->bulk_in_enabled = 1; -+ -+ d = fsg_ep_desc(fsg->gadget, -+ &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc, -+ &fsg_ss_bulk_out_desc); -+ if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0) -+ goto reset; -+ fsg->bulk_out_enabled = 1; -+ fsg->bulk_out_maxpacket = usb_endpoint_maxp(d); -+ clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); -+ -+ if (transport_is_cbi()) { -+ d = fsg_ep_desc(fsg->gadget, -+ &fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc, -+ &fsg_ss_intr_in_desc); -+ if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0) -+ goto reset; -+ fsg->intr_in_enabled = 1; -+ } -+ -+ /* Allocate the requests */ -+ for (i = 0; i < fsg_num_buffers; ++i) { -+ struct fsg_buffhd *bh = &fsg->buffhds[i]; -+ -+ if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0) -+ goto reset; -+ if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0) -+ goto reset; -+ bh->inreq->buf = bh->outreq->buf = bh->buf; -+ bh->inreq->context = bh->outreq->context = bh; -+ bh->inreq->complete = bulk_in_complete; -+ bh->outreq->complete = bulk_out_complete; -+ } -+ if (transport_is_cbi()) { -+ if ((rc = alloc_request(fsg, fsg->intr_in, &fsg->intreq)) != 0) -+ goto reset; -+ fsg->intreq->complete = intr_in_complete; -+ } -+ -+ fsg->running = 1; -+ for (i = 0; i < fsg->nluns; ++i) -+ fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED; -+ return rc; -+} -+ -+ -+/* -+ * Change our operational configuration. This code must agree with the code -+ * that returns config descriptors, and with interface altsetting code. -+ * -+ * It's also responsible for power management interactions. Some -+ * configurations might not work with our current power sources. -+ * For now we just assume the gadget is always self-powered. -+ */ -+static int do_set_config(struct fsg_dev *fsg, u8 new_config) -+{ -+ int rc = 0; -+ -+ /* Disable the single interface */ -+ if (fsg->config != 0) { -+ DBG(fsg, "reset config\n"); -+ fsg->config = 0; -+ rc = do_set_interface(fsg, -1); -+ } -+ -+ /* Enable the interface */ -+ if (new_config != 0) { -+ fsg->config = new_config; -+ if ((rc = do_set_interface(fsg, 0)) != 0) -+ fsg->config = 0; // Reset on errors -+ else -+ INFO(fsg, "%s config #%d\n", -+ usb_speed_string(fsg->gadget->speed), -+ fsg->config); -+ } -+ return rc; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static void handle_exception(struct fsg_dev *fsg) -+{ -+ siginfo_t info; -+ int sig; -+ int i; -+ int num_active; -+ struct fsg_buffhd *bh; -+ enum fsg_state old_state; -+ u8 new_config; -+ struct fsg_lun *curlun; -+ unsigned int exception_req_tag; -+ int rc; -+ -+ /* Clear the existing signals. Anything but SIGUSR1 is converted -+ * into a high-priority EXIT exception. */ -+ for (;;) { -+ sig = dequeue_signal_lock(current, ¤t->blocked, &info); -+ if (!sig) -+ break; -+ if (sig != SIGUSR1) { -+ if (fsg->state < FSG_STATE_EXIT) -+ DBG(fsg, "Main thread exiting on signal\n"); -+ raise_exception(fsg, FSG_STATE_EXIT); -+ } -+ } -+ -+ /* Cancel all the pending transfers */ -+ if (fsg->intreq_busy) -+ usb_ep_dequeue(fsg->intr_in, fsg->intreq); -+ for (i = 0; i < fsg_num_buffers; ++i) { -+ bh = &fsg->buffhds[i]; -+ if (bh->inreq_busy) -+ usb_ep_dequeue(fsg->bulk_in, bh->inreq); -+ if (bh->outreq_busy) -+ usb_ep_dequeue(fsg->bulk_out, bh->outreq); -+ } -+ -+ /* Wait until everything is idle */ -+ for (;;) { -+ num_active = fsg->intreq_busy; -+ for (i = 0; i < fsg_num_buffers; ++i) { -+ bh = &fsg->buffhds[i]; -+ num_active += bh->inreq_busy + bh->outreq_busy; -+ } -+ if (num_active == 0) -+ break; -+ if (sleep_thread(fsg)) -+ return; -+ } -+ -+ /* Clear out the controller's fifos */ -+ if (fsg->bulk_in_enabled) -+ usb_ep_fifo_flush(fsg->bulk_in); -+ if (fsg->bulk_out_enabled) -+ usb_ep_fifo_flush(fsg->bulk_out); -+ if (fsg->intr_in_enabled) -+ usb_ep_fifo_flush(fsg->intr_in); -+ -+ /* Reset the I/O buffer states and pointers, the SCSI -+ * state, and the exception. Then invoke the handler. */ -+ spin_lock_irq(&fsg->lock); -+ -+ for (i = 0; i < fsg_num_buffers; ++i) { -+ bh = &fsg->buffhds[i]; -+ bh->state = BUF_STATE_EMPTY; -+ } -+ fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain = -+ &fsg->buffhds[0]; -+ -+ exception_req_tag = fsg->exception_req_tag; -+ new_config = fsg->new_config; -+ old_state = fsg->state; -+ -+ if (old_state == FSG_STATE_ABORT_BULK_OUT) -+ fsg->state = FSG_STATE_STATUS_PHASE; -+ else { -+ for (i = 0; i < fsg->nluns; ++i) { -+ curlun = &fsg->luns[i]; -+ curlun->prevent_medium_removal = 0; -+ curlun->sense_data = curlun->unit_attention_data = -+ SS_NO_SENSE; -+ curlun->sense_data_info = 0; -+ curlun->info_valid = 0; -+ } -+ fsg->state = FSG_STATE_IDLE; -+ } -+ spin_unlock_irq(&fsg->lock); -+ -+ /* Carry out any extra actions required for the exception */ -+ switch (old_state) { -+ default: -+ break; -+ -+ case FSG_STATE_ABORT_BULK_OUT: -+ send_status(fsg); -+ spin_lock_irq(&fsg->lock); -+ if (fsg->state == FSG_STATE_STATUS_PHASE) -+ fsg->state = FSG_STATE_IDLE; -+ spin_unlock_irq(&fsg->lock); -+ break; -+ -+ case FSG_STATE_RESET: -+ /* In case we were forced against our will to halt a -+ * bulk endpoint, clear the halt now. (The SuperH UDC -+ * requires this.) */ -+ if (test_and_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) -+ usb_ep_clear_halt(fsg->bulk_in); -+ -+ if (transport_is_bbb()) { -+ if (fsg->ep0_req_tag == exception_req_tag) -+ ep0_queue(fsg); // Complete the status stage -+ -+ } else if (transport_is_cbi()) -+ send_status(fsg); // Status by interrupt pipe -+ -+ /* Technically this should go here, but it would only be -+ * a waste of time. Ditto for the INTERFACE_CHANGE and -+ * CONFIG_CHANGE cases. */ -+ // for (i = 0; i < fsg->nluns; ++i) -+ // fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED; -+ break; -+ -+ case FSG_STATE_INTERFACE_CHANGE: -+ rc = do_set_interface(fsg, 0); -+ if (fsg->ep0_req_tag != exception_req_tag) -+ break; -+ if (rc != 0) // STALL on errors -+ fsg_set_halt(fsg, fsg->ep0); -+ else // Complete the status stage -+ ep0_queue(fsg); -+ break; -+ -+ case FSG_STATE_CONFIG_CHANGE: -+ rc = do_set_config(fsg, new_config); -+ if (fsg->ep0_req_tag != exception_req_tag) -+ break; -+ if (rc != 0) // STALL on errors -+ fsg_set_halt(fsg, fsg->ep0); -+ else // Complete the status stage -+ ep0_queue(fsg); -+ break; -+ -+ case FSG_STATE_DISCONNECT: -+ for (i = 0; i < fsg->nluns; ++i) -+ fsg_lun_fsync_sub(fsg->luns + i); -+ do_set_config(fsg, 0); // Unconfigured state -+ break; -+ -+ case FSG_STATE_EXIT: -+ case FSG_STATE_TERMINATED: -+ do_set_config(fsg, 0); // Free resources -+ spin_lock_irq(&fsg->lock); -+ fsg->state = FSG_STATE_TERMINATED; // Stop the thread -+ spin_unlock_irq(&fsg->lock); -+ break; -+ } -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int fsg_main_thread(void *fsg_) -+{ -+ struct fsg_dev *fsg = fsg_; -+ -+ /* Allow the thread to be killed by a signal, but set the signal mask -+ * to block everything but INT, TERM, KILL, and USR1. */ -+ allow_signal(SIGINT); -+ allow_signal(SIGTERM); -+ allow_signal(SIGKILL); -+ allow_signal(SIGUSR1); -+ -+ /* Allow the thread to be frozen */ -+ set_freezable(); -+ -+ /* Arrange for userspace references to be interpreted as kernel -+ * pointers. That way we can pass a kernel pointer to a routine -+ * that expects a __user pointer and it will work okay. */ -+ set_fs(get_ds()); -+ -+ /* The main loop */ -+ while (fsg->state != FSG_STATE_TERMINATED) { -+ if (exception_in_progress(fsg) || signal_pending(current)) { -+ handle_exception(fsg); -+ continue; -+ } -+ -+ if (!fsg->running) { -+ sleep_thread(fsg); -+ continue; -+ } -+ -+ if (get_next_command(fsg)) -+ continue; -+ -+ spin_lock_irq(&fsg->lock); -+ if (!exception_in_progress(fsg)) -+ fsg->state = FSG_STATE_DATA_PHASE; -+ spin_unlock_irq(&fsg->lock); -+ -+ if (do_scsi_command(fsg) || finish_reply(fsg)) -+ continue; -+ -+ spin_lock_irq(&fsg->lock); -+ if (!exception_in_progress(fsg)) -+ fsg->state = FSG_STATE_STATUS_PHASE; -+ spin_unlock_irq(&fsg->lock); -+ -+ if (send_status(fsg)) -+ continue; -+ -+ spin_lock_irq(&fsg->lock); -+ if (!exception_in_progress(fsg)) -+ fsg->state = FSG_STATE_IDLE; -+ spin_unlock_irq(&fsg->lock); -+ } -+ -+ spin_lock_irq(&fsg->lock); -+ fsg->thread_task = NULL; -+ spin_unlock_irq(&fsg->lock); -+ -+ /* If we are exiting because of a signal, unregister the -+ * gadget driver. */ -+ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) -+ usb_gadget_unregister_driver(&fsg_driver); -+ -+ /* Let the unbind and cleanup routines know the thread has exited */ -+ complete_and_exit(&fsg->thread_notifier, 0); -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+ -+/* The write permissions and store_xxx pointers are set in fsg_bind() */ -+static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL); -+static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL); -+static DEVICE_ATTR(file, 0444, fsg_show_file, NULL); -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static void fsg_release(struct kref *ref) -+{ -+ struct fsg_dev *fsg = container_of(ref, struct fsg_dev, ref); -+ -+ kfree(fsg->luns); -+ kfree(fsg); -+} -+ -+static void lun_release(struct device *dev) -+{ -+ struct rw_semaphore *filesem = dev_get_drvdata(dev); -+ struct fsg_dev *fsg = -+ container_of(filesem, struct fsg_dev, filesem); -+ -+ kref_put(&fsg->ref, fsg_release); -+} -+ -+static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) -+{ -+ struct fsg_dev *fsg = get_gadget_data(gadget); -+ int i; -+ struct fsg_lun *curlun; -+ struct usb_request *req = fsg->ep0req; -+ -+ DBG(fsg, "unbind\n"); -+ clear_bit(REGISTERED, &fsg->atomic_bitflags); -+ -+ /* If the thread isn't already dead, tell it to exit now */ -+ if (fsg->state != FSG_STATE_TERMINATED) { -+ raise_exception(fsg, FSG_STATE_EXIT); -+ wait_for_completion(&fsg->thread_notifier); -+ -+ /* The cleanup routine waits for this completion also */ -+ complete(&fsg->thread_notifier); -+ } -+ -+ /* Unregister the sysfs attribute files and the LUNs */ -+ for (i = 0; i < fsg->nluns; ++i) { -+ curlun = &fsg->luns[i]; -+ if (curlun->registered) { -+ device_remove_file(&curlun->dev, &dev_attr_nofua); -+ device_remove_file(&curlun->dev, &dev_attr_ro); -+ device_remove_file(&curlun->dev, &dev_attr_file); -+ fsg_lun_close(curlun); -+ device_unregister(&curlun->dev); -+ curlun->registered = 0; -+ } -+ } -+ -+ /* Free the data buffers */ -+ for (i = 0; i < fsg_num_buffers; ++i) -+ kfree(fsg->buffhds[i].buf); -+ -+ /* Free the request and buffer for endpoint 0 */ -+ if (req) { -+ kfree(req->buf); -+ usb_ep_free_request(fsg->ep0, req); -+ } -+ -+ set_gadget_data(gadget, NULL); -+} -+ -+ -+static int __init check_parameters(struct fsg_dev *fsg) -+{ -+ int prot; -+ int gcnum; -+ -+ /* Store the default values */ -+ mod_data.transport_type = USB_PR_BULK; -+ mod_data.transport_name = "Bulk-only"; -+ mod_data.protocol_type = USB_SC_SCSI; -+ mod_data.protocol_name = "Transparent SCSI"; -+ -+ /* Some peripheral controllers are known not to be able to -+ * halt bulk endpoints correctly. If one of them is present, -+ * disable stalls. -+ */ -+ if (gadget_is_at91(fsg->gadget)) -+ mod_data.can_stall = 0; -+ -+ if (mod_data.release == 0xffff) { // Parameter wasn't set -+ gcnum = usb_gadget_controller_number(fsg->gadget); -+ if (gcnum >= 0) -+ mod_data.release = 0x0300 + gcnum; -+ else { -+ WARNING(fsg, "controller '%s' not recognized\n", -+ fsg->gadget->name); -+ mod_data.release = 0x0399; -+ } -+ } -+ -+ prot = simple_strtol(mod_data.protocol_parm, NULL, 0); -+ -+#ifdef CONFIG_USB_FILE_STORAGE_TEST -+ if (strnicmp(mod_data.transport_parm, "BBB", 10) == 0) { -+ ; // Use default setting -+ } else if (strnicmp(mod_data.transport_parm, "CB", 10) == 0) { -+ mod_data.transport_type = USB_PR_CB; -+ mod_data.transport_name = "Control-Bulk"; -+ } else if (strnicmp(mod_data.transport_parm, "CBI", 10) == 0) { -+ mod_data.transport_type = USB_PR_CBI; -+ mod_data.transport_name = "Control-Bulk-Interrupt"; -+ } else { -+ ERROR(fsg, "invalid transport: %s\n", mod_data.transport_parm); -+ return -EINVAL; -+ } -+ -+ if (strnicmp(mod_data.protocol_parm, "SCSI", 10) == 0 || -+ prot == USB_SC_SCSI) { -+ ; // Use default setting -+ } else if (strnicmp(mod_data.protocol_parm, "RBC", 10) == 0 || -+ prot == USB_SC_RBC) { -+ mod_data.protocol_type = USB_SC_RBC; -+ mod_data.protocol_name = "RBC"; -+ } else if (strnicmp(mod_data.protocol_parm, "8020", 4) == 0 || -+ strnicmp(mod_data.protocol_parm, "ATAPI", 10) == 0 || -+ prot == USB_SC_8020) { -+ mod_data.protocol_type = USB_SC_8020; -+ mod_data.protocol_name = "8020i (ATAPI)"; -+ } else if (strnicmp(mod_data.protocol_parm, "QIC", 3) == 0 || -+ prot == USB_SC_QIC) { -+ mod_data.protocol_type = USB_SC_QIC; -+ mod_data.protocol_name = "QIC-157"; -+ } else if (strnicmp(mod_data.protocol_parm, "UFI", 10) == 0 || -+ prot == USB_SC_UFI) { -+ mod_data.protocol_type = USB_SC_UFI; -+ mod_data.protocol_name = "UFI"; -+ } else if (strnicmp(mod_data.protocol_parm, "8070", 4) == 0 || -+ prot == USB_SC_8070) { -+ mod_data.protocol_type = USB_SC_8070; -+ mod_data.protocol_name = "8070i"; -+ } else { -+ ERROR(fsg, "invalid protocol: %s\n", mod_data.protocol_parm); -+ return -EINVAL; -+ } -+ -+ mod_data.buflen &= PAGE_CACHE_MASK; -+ if (mod_data.buflen <= 0) { -+ ERROR(fsg, "invalid buflen\n"); -+ return -ETOOSMALL; -+ } -+ -+#endif /* CONFIG_USB_FILE_STORAGE_TEST */ -+ -+ /* Serial string handling. -+ * On a real device, the serial string would be loaded -+ * from permanent storage. */ -+ if (mod_data.serial) { -+ const char *ch; -+ unsigned len = 0; -+ -+ /* Sanity check : -+ * The CB[I] specification limits the serial string to -+ * 12 uppercase hexadecimal characters. -+ * BBB need at least 12 uppercase hexadecimal characters, -+ * with a maximum of 126. */ -+ for (ch = mod_data.serial; *ch; ++ch) { -+ ++len; -+ if ((*ch < '0' || *ch > '9') && -+ (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */ -+ WARNING(fsg, -+ "Invalid serial string character: %c\n", -+ *ch); -+ goto no_serial; -+ } -+ } -+ if (len > 126 || -+ (mod_data.transport_type == USB_PR_BULK && len < 12) || -+ (mod_data.transport_type != USB_PR_BULK && len > 12)) { -+ WARNING(fsg, "Invalid serial string length!\n"); -+ goto no_serial; -+ } -+ fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial; -+ } else { -+ WARNING(fsg, "No serial-number string provided!\n"); -+ no_serial: -+ device_desc.iSerialNumber = 0; -+ } -+ -+ return 0; -+} -+ -+ -+static int __init fsg_bind(struct usb_gadget *gadget) -+{ -+ struct fsg_dev *fsg = the_fsg; -+ int rc; -+ int i; -+ struct fsg_lun *curlun; -+ struct usb_ep *ep; -+ struct usb_request *req; -+ char *pathbuf, *p; -+ -+ fsg->gadget = gadget; -+ set_gadget_data(gadget, fsg); -+ fsg->ep0 = gadget->ep0; -+ fsg->ep0->driver_data = fsg; -+ -+ if ((rc = check_parameters(fsg)) != 0) -+ goto out; -+ -+ if (mod_data.removable) { // Enable the store_xxx attributes -+ dev_attr_file.attr.mode = 0644; -+ dev_attr_file.store = fsg_store_file; -+ if (!mod_data.cdrom) { -+ dev_attr_ro.attr.mode = 0644; -+ dev_attr_ro.store = fsg_store_ro; -+ } -+ } -+ -+ /* Only for removable media? */ -+ dev_attr_nofua.attr.mode = 0644; -+ dev_attr_nofua.store = fsg_store_nofua; -+ -+ /* Find out how many LUNs there should be */ -+ i = mod_data.nluns; -+ if (i == 0) -+ i = max(mod_data.num_filenames, 1u); -+ if (i > FSG_MAX_LUNS) { -+ ERROR(fsg, "invalid number of LUNs: %d\n", i); -+ rc = -EINVAL; -+ goto out; -+ } -+ -+ /* Create the LUNs, open their backing files, and register the -+ * LUN devices in sysfs. */ -+ fsg->luns = kzalloc(i * sizeof(struct fsg_lun), GFP_KERNEL); -+ if (!fsg->luns) { -+ rc = -ENOMEM; -+ goto out; -+ } -+ fsg->nluns = i; -+ -+ for (i = 0; i < fsg->nluns; ++i) { -+ curlun = &fsg->luns[i]; -+ curlun->cdrom = !!mod_data.cdrom; -+ curlun->ro = mod_data.cdrom || mod_data.ro[i]; -+ curlun->initially_ro = curlun->ro; -+ curlun->removable = mod_data.removable; -+ curlun->nofua = mod_data.nofua[i]; -+ curlun->dev.release = lun_release; -+ curlun->dev.parent = &gadget->dev; -+ curlun->dev.driver = &fsg_driver.driver; -+ dev_set_drvdata(&curlun->dev, &fsg->filesem); -+ dev_set_name(&curlun->dev,"%s-lun%d", -+ dev_name(&gadget->dev), i); -+ -+ kref_get(&fsg->ref); -+ rc = device_register(&curlun->dev); -+ if (rc) { -+ INFO(fsg, "failed to register LUN%d: %d\n", i, rc); -+ put_device(&curlun->dev); -+ goto out; -+ } -+ curlun->registered = 1; -+ -+ rc = device_create_file(&curlun->dev, &dev_attr_ro); -+ if (rc) -+ goto out; -+ rc = device_create_file(&curlun->dev, &dev_attr_nofua); -+ if (rc) -+ goto out; -+ rc = device_create_file(&curlun->dev, &dev_attr_file); -+ if (rc) -+ goto out; -+ -+ if (mod_data.file[i] && *mod_data.file[i]) { -+ rc = fsg_lun_open(curlun, mod_data.file[i]); -+ if (rc) -+ goto out; -+ } else if (!mod_data.removable) { -+ ERROR(fsg, "no file given for LUN%d\n", i); -+ rc = -EINVAL; -+ goto out; -+ } -+ } -+ -+ /* Find all the endpoints we will use */ -+ usb_ep_autoconfig_reset(gadget); -+ ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc); -+ if (!ep) -+ goto autoconf_fail; -+ ep->driver_data = fsg; // claim the endpoint -+ fsg->bulk_in = ep; -+ -+ ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc); -+ if (!ep) -+ goto autoconf_fail; -+ ep->driver_data = fsg; // claim the endpoint -+ fsg->bulk_out = ep; -+ -+ if (transport_is_cbi()) { -+ ep = usb_ep_autoconfig(gadget, &fsg_fs_intr_in_desc); -+ if (!ep) -+ goto autoconf_fail; -+ ep->driver_data = fsg; // claim the endpoint -+ fsg->intr_in = ep; -+ } -+ -+ /* Fix up the descriptors */ -+ device_desc.idVendor = cpu_to_le16(mod_data.vendor); -+ device_desc.idProduct = cpu_to_le16(mod_data.product); -+ device_desc.bcdDevice = cpu_to_le16(mod_data.release); -+ -+ i = (transport_is_cbi() ? 3 : 2); // Number of endpoints -+ fsg_intf_desc.bNumEndpoints = i; -+ fsg_intf_desc.bInterfaceSubClass = mod_data.protocol_type; -+ fsg_intf_desc.bInterfaceProtocol = mod_data.transport_type; -+ fsg_fs_function[i + FSG_FS_FUNCTION_PRE_EP_ENTRIES] = NULL; -+ -+ if (gadget_is_dualspeed(gadget)) { -+ fsg_hs_function[i + FSG_HS_FUNCTION_PRE_EP_ENTRIES] = NULL; -+ -+ /* Assume endpoint addresses are the same for both speeds */ -+ fsg_hs_bulk_in_desc.bEndpointAddress = -+ fsg_fs_bulk_in_desc.bEndpointAddress; -+ fsg_hs_bulk_out_desc.bEndpointAddress = -+ fsg_fs_bulk_out_desc.bEndpointAddress; -+ fsg_hs_intr_in_desc.bEndpointAddress = -+ fsg_fs_intr_in_desc.bEndpointAddress; -+ } -+ -+ if (gadget_is_superspeed(gadget)) { -+ unsigned max_burst; -+ -+ fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL; -+ -+ /* Calculate bMaxBurst, we know packet size is 1024 */ -+ max_burst = min_t(unsigned, mod_data.buflen / 1024, 15); -+ -+ /* Assume endpoint addresses are the same for both speeds */ -+ fsg_ss_bulk_in_desc.bEndpointAddress = -+ fsg_fs_bulk_in_desc.bEndpointAddress; -+ fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; -+ -+ fsg_ss_bulk_out_desc.bEndpointAddress = -+ fsg_fs_bulk_out_desc.bEndpointAddress; -+ fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; -+ } -+ -+ if (gadget_is_otg(gadget)) -+ fsg_otg_desc.bmAttributes |= USB_OTG_HNP; -+ -+ rc = -ENOMEM; -+ -+ /* Allocate the request and buffer for endpoint 0 */ -+ fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL); -+ if (!req) -+ goto out; -+ req->buf = kmalloc(EP0_BUFSIZE, GFP_KERNEL); -+ if (!req->buf) -+ goto out; -+ req->complete = ep0_complete; -+ -+ /* Allocate the data buffers */ -+ for (i = 0; i < fsg_num_buffers; ++i) { -+ struct fsg_buffhd *bh = &fsg->buffhds[i]; -+ -+ /* Allocate for the bulk-in endpoint. We assume that -+ * the buffer will also work with the bulk-out (and -+ * interrupt-in) endpoint. */ -+ bh->buf = kmalloc(mod_data.buflen, GFP_KERNEL); -+ if (!bh->buf) -+ goto out; -+ bh->next = bh + 1; -+ } -+ fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0]; -+ -+ /* This should reflect the actual gadget power source */ -+ usb_gadget_set_selfpowered(gadget); -+ -+ snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer, -+ "%s %s with %s", -+ init_utsname()->sysname, init_utsname()->release, -+ gadget->name); -+ -+ fsg->thread_task = kthread_create(fsg_main_thread, fsg, -+ "file-storage-gadget"); -+ if (IS_ERR(fsg->thread_task)) { -+ rc = PTR_ERR(fsg->thread_task); -+ goto out; -+ } -+ -+ INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); -+ INFO(fsg, "NOTE: This driver is deprecated. " -+ "Consider using g_mass_storage instead.\n"); -+ INFO(fsg, "Number of LUNs=%d\n", fsg->nluns); -+ -+ pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); -+ for (i = 0; i < fsg->nluns; ++i) { -+ curlun = &fsg->luns[i]; -+ if (fsg_lun_is_open(curlun)) { -+ p = NULL; -+ if (pathbuf) { -+ p = d_path(&curlun->filp->f_path, -+ pathbuf, PATH_MAX); -+ if (IS_ERR(p)) -+ p = NULL; -+ } -+ LINFO(curlun, "ro=%d, nofua=%d, file: %s\n", -+ curlun->ro, curlun->nofua, (p ? p : "(error)")); -+ } -+ } -+ kfree(pathbuf); -+ -+ DBG(fsg, "transport=%s (x%02x)\n", -+ mod_data.transport_name, mod_data.transport_type); -+ DBG(fsg, "protocol=%s (x%02x)\n", -+ mod_data.protocol_name, mod_data.protocol_type); -+ DBG(fsg, "VendorID=x%04x, ProductID=x%04x, Release=x%04x\n", -+ mod_data.vendor, mod_data.product, mod_data.release); -+ DBG(fsg, "removable=%d, stall=%d, cdrom=%d, buflen=%u\n", -+ mod_data.removable, mod_data.can_stall, -+ mod_data.cdrom, mod_data.buflen); -+ DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task)); -+ -+ set_bit(REGISTERED, &fsg->atomic_bitflags); -+ -+ /* Tell the thread to start working */ -+ wake_up_process(fsg->thread_task); -+ return 0; -+ -+autoconf_fail: -+ ERROR(fsg, "unable to autoconfigure all endpoints\n"); -+ rc = -ENOTSUPP; -+ -+out: -+ fsg->state = FSG_STATE_TERMINATED; // The thread is dead -+ fsg_unbind(gadget); -+ complete(&fsg->thread_notifier); -+ return rc; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static void fsg_suspend(struct usb_gadget *gadget) -+{ -+ struct fsg_dev *fsg = get_gadget_data(gadget); -+ -+ DBG(fsg, "suspend\n"); -+ set_bit(SUSPENDED, &fsg->atomic_bitflags); -+} -+ -+static void fsg_resume(struct usb_gadget *gadget) -+{ -+ struct fsg_dev *fsg = get_gadget_data(gadget); -+ -+ DBG(fsg, "resume\n"); -+ clear_bit(SUSPENDED, &fsg->atomic_bitflags); -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static struct usb_gadget_driver fsg_driver = { -+ .max_speed = USB_SPEED_SUPER, -+ .function = (char *) fsg_string_product, -+ .unbind = fsg_unbind, -+ .disconnect = fsg_disconnect, -+ .setup = fsg_setup, -+ .suspend = fsg_suspend, -+ .resume = fsg_resume, -+ -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ // .release = ... -+ // .suspend = ... -+ // .resume = ... -+ }, -+}; -+ -+ -+static int __init fsg_alloc(void) -+{ -+ struct fsg_dev *fsg; -+ -+ fsg = kzalloc(sizeof *fsg + -+ fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL); -+ -+ if (!fsg) -+ return -ENOMEM; -+ spin_lock_init(&fsg->lock); -+ init_rwsem(&fsg->filesem); -+ kref_init(&fsg->ref); -+ init_completion(&fsg->thread_notifier); -+ -+ the_fsg = fsg; -+ return 0; -+} -+ -+ -+static int __init fsg_init(void) -+{ -+ int rc; -+ struct fsg_dev *fsg; -+ -+ rc = fsg_num_buffers_validate(); -+ if (rc != 0) -+ return rc; -+ -+ if ((rc = fsg_alloc()) != 0) -+ return rc; -+ fsg = the_fsg; -+ if ((rc = usb_gadget_probe_driver(&fsg_driver, fsg_bind)) != 0) -+ kref_put(&fsg->ref, fsg_release); -+ return rc; -+} -+module_init(fsg_init); -+ -+ -+static void __exit fsg_cleanup(void) -+{ -+ struct fsg_dev *fsg = the_fsg; -+ -+ /* Unregister the driver iff the thread hasn't already done so */ -+ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) -+ usb_gadget_unregister_driver(&fsg_driver); -+ -+ /* Wait for the thread to finish up */ -+ wait_for_completion(&fsg->thread_notifier); -+ -+ kref_put(&fsg->ref, fsg_release); -+} -+module_exit(fsg_cleanup); ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -762,6 +762,19 @@ config USB_HWA_HCD - To compile this driver a module, choose M here: the module - will be called "hwa-hc". - -+config USB_DWCOTG -+ tristate "Synopsis DWC host support" -+ depends on USB -+ help -+ The Synopsis DWC controller is a dual-role -+ host/peripheral/OTG ("On The Go") USB controllers. -+ -+ Enable this option to support this IP in host controller mode. -+ If unsure, say N. -+ -+ To compile this driver as a module, choose M here: the -+ modules built will be called dwc_otg and dwc_common_port. -+ - config USB_IMX21_HCD - tristate "i.MX21 HCD support" - depends on ARM && ARCH_MXC ---- a/drivers/usb/host/Makefile -+++ b/drivers/usb/host/Makefile -@@ -74,6 +74,8 @@ obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o - obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o - obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o - obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o -+ -+obj-$(CONFIG_USB_DWCOTG) += dwc_otg/ dwc_common_port/ - obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o - obj-$(CONFIG_USB_FSL_USB2) += fsl-mph-dr-of.o - obj-$(CONFIG_USB_EHCI_FSL) += fsl-mph-dr-of.o ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/Makefile -@@ -0,0 +1,58 @@ -+# -+# Makefile for DWC_common library -+# -+ -+ifneq ($(KERNELRELEASE),) -+ -+ccflags-y += -DDWC_LINUX -+#ccflags-y += -DDEBUG -+#ccflags-y += -DDWC_DEBUG_REGS -+#ccflags-y += -DDWC_DEBUG_MEMORY -+ -+ccflags-y += -DDWC_LIBMODULE -+ccflags-y += -DDWC_CCLIB -+#ccflags-y += -DDWC_CRYPTOLIB -+ccflags-y += -DDWC_NOTIFYLIB -+ccflags-y += -DDWC_UTFLIB -+ -+obj-$(CONFIG_USB_DWCOTG) += dwc_common_port_lib.o -+dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \ -+ dwc_crypto.o dwc_notifier.o \ -+ dwc_common_linux.o dwc_mem.o -+ -+kernrelwd := $(subst ., ,$(KERNELRELEASE)) -+kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd)) -+ -+ifneq ($(kernrel3),2.6.20) -+# grayg - I only know that we use ccflags-y in 2.6.31 actually -+ccflags-y += $(CPPFLAGS) -+endif -+ -+else -+ -+#ifeq ($(KDIR),) -+#$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment) -+#endif -+ -+ifeq ($(ARCH),) -+$(error Must give "ARCH=" on command line or in environment. Also, if \ -+ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-") -+endif -+ -+ifeq ($(DOXYGEN),) -+DOXYGEN := doxygen -+endif -+ -+default: -+ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules -+ -+docs: $(wildcard *.[hc]) doc/doxygen.cfg -+ $(DOXYGEN) doc/doxygen.cfg -+ -+tags: $(wildcard *.[hc]) -+ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) -+ -+endif -+ -+clean: -+ rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/Makefile.fbsd -@@ -0,0 +1,17 @@ -+CFLAGS += -I/sys/i386/compile/GENERIC -I/sys/i386/include -I/usr/include -+CFLAGS += -DDWC_FREEBSD -+CFLAGS += -DDEBUG -+#CFLAGS += -DDWC_DEBUG_REGS -+#CFLAGS += -DDWC_DEBUG_MEMORY -+ -+#CFLAGS += -DDWC_LIBMODULE -+#CFLAGS += -DDWC_CCLIB -+#CFLAGS += -DDWC_CRYPTOLIB -+#CFLAGS += -DDWC_NOTIFYLIB -+#CFLAGS += -DDWC_UTFLIB -+ -+KMOD = dwc_common_port_lib -+SRCS = dwc_cc.c dwc_modpow.c dwc_dh.c dwc_crypto.c dwc_notifier.c \ -+ dwc_common_fbsd.c dwc_mem.c -+ -+.include ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/Makefile.linux -@@ -0,0 +1,49 @@ -+# -+# Makefile for DWC_common library -+# -+ifneq ($(KERNELRELEASE),) -+ -+ccflags-y += -DDWC_LINUX -+#ccflags-y += -DDEBUG -+#ccflags-y += -DDWC_DEBUG_REGS -+#ccflags-y += -DDWC_DEBUG_MEMORY -+ -+ccflags-y += -DDWC_LIBMODULE -+ccflags-y += -DDWC_CCLIB -+ccflags-y += -DDWC_CRYPTOLIB -+ccflags-y += -DDWC_NOTIFYLIB -+ccflags-y += -DDWC_UTFLIB -+ -+obj-m := dwc_common_port_lib.o -+dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \ -+ dwc_crypto.o dwc_notifier.o \ -+ dwc_common_linux.o dwc_mem.o -+ -+else -+ -+ifeq ($(KDIR),) -+$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment) -+endif -+ -+ifeq ($(ARCH),) -+$(error Must give "ARCH=" on command line or in environment. Also, if \ -+ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-") -+endif -+ -+ifeq ($(DOXYGEN),) -+DOXYGEN := doxygen -+endif -+ -+default: -+ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules -+ -+docs: $(wildcard *.[hc]) doc/doxygen.cfg -+ $(DOXYGEN) doc/doxygen.cfg -+ -+tags: $(wildcard *.[hc]) -+ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) -+ -+endif -+ -+clean: -+ rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/changes.txt -@@ -0,0 +1,174 @@ -+ -+dwc_read_reg32() and friends now take an additional parameter, a pointer to an -+IO context struct. The IO context struct should live in an os-dependent struct -+in your driver. As an example, the dwc_usb3 driver has an os-dependent struct -+named 'os_dep' embedded in the main device struct. So there these calls look -+like this: -+ -+ dwc_read_reg32(&usb3_dev->os_dep.ioctx, &pcd->dev_global_regs->dcfg); -+ -+ dwc_write_reg32(&usb3_dev->os_dep.ioctx, -+ &pcd->dev_global_regs->dcfg, 0); -+ -+Note that for the existing Linux driver ports, it is not necessary to actually -+define the 'ioctx' member in the os-dependent struct. Since Linux does not -+require an IO context, its macros for dwc_read_reg32() and friends do not -+use the context pointer, so it is optimized away by the compiler. But it is -+necessary to add the pointer parameter to all of the call sites, to be ready -+for any future ports (such as FreeBSD) which do require an IO context. -+ -+ -+Similarly, dwc_alloc(), dwc_alloc_atomic(), dwc_strdup(), and dwc_free() now -+take an additional parameter, a pointer to a memory context. Examples: -+ -+ addr = dwc_alloc(&usb3_dev->os_dep.memctx, size); -+ -+ dwc_free(&usb3_dev->os_dep.memctx, addr); -+ -+Again, for the Linux ports, it is not necessary to actually define the memctx -+member, but it is necessary to add the pointer parameter to all of the call -+sites. -+ -+ -+Same for dwc_dma_alloc() and dwc_dma_free(). Examples: -+ -+ virt_addr = dwc_dma_alloc(&usb3_dev->os_dep.dmactx, size, &phys_addr); -+ -+ dwc_dma_free(&usb3_dev->os_dep.dmactx, size, virt_addr, phys_addr); -+ -+ -+Same for dwc_mutex_alloc() and dwc_mutex_free(). Examples: -+ -+ mutex = dwc_mutex_alloc(&usb3_dev->os_dep.mtxctx); -+ -+ dwc_mutex_free(&usb3_dev->os_dep.mtxctx, mutex); -+ -+ -+Same for dwc_spinlock_alloc() and dwc_spinlock_free(). Examples: -+ -+ lock = dwc_spinlock_alloc(&usb3_dev->osdep.splctx); -+ -+ dwc_spinlock_free(&usb3_dev->osdep.splctx, lock); -+ -+ -+Same for dwc_timer_alloc(). Example: -+ -+ timer = dwc_timer_alloc(&usb3_dev->os_dep.tmrctx, "dwc_usb3_tmr1", -+ cb_func, cb_data); -+ -+ -+Same for dwc_waitq_alloc(). Example: -+ -+ waitq = dwc_waitq_alloc(&usb3_dev->os_dep.wtqctx); -+ -+ -+Same for dwc_thread_run(). Example: -+ -+ thread = dwc_thread_run(&usb3_dev->os_dep.thdctx, func, -+ "dwc_usb3_thd1", data); -+ -+ -+Same for dwc_workq_alloc(). Example: -+ -+ workq = dwc_workq_alloc(&usb3_dev->osdep.wkqctx, "dwc_usb3_wkq1"); -+ -+ -+Same for dwc_task_alloc(). Example: -+ -+ task = dwc_task_alloc(&usb3_dev->os_dep.tskctx, "dwc_usb3_tsk1", -+ cb_func, cb_data); -+ -+ -+In addition to the context pointer additions, a few core functions have had -+other changes made to their parameters: -+ -+The 'flags' parameter to dwc_spinlock_irqsave() and dwc_spinunlock_irqrestore() -+has been changed from a uint64_t to a dwc_irqflags_t. -+ -+dwc_thread_should_stop() now takes a 'dwc_thread_t *' parameter, because the -+FreeBSD equivalent of that function requires it. -+ -+And, in addition to the context pointer, dwc_task_alloc() also adds a -+'char *name' parameter, to be consistent with dwc_thread_run() and -+dwc_workq_alloc(), and because the FreeBSD equivalent of that function -+requires a unique name. -+ -+ -+Here is a complete list of the core functions that now take a pointer to a -+context as their first parameter: -+ -+ dwc_read_reg32 -+ dwc_read_reg64 -+ dwc_write_reg32 -+ dwc_write_reg64 -+ dwc_modify_reg32 -+ dwc_modify_reg64 -+ dwc_alloc -+ dwc_alloc_atomic -+ dwc_strdup -+ dwc_free -+ dwc_dma_alloc -+ dwc_dma_free -+ dwc_mutex_alloc -+ dwc_mutex_free -+ dwc_spinlock_alloc -+ dwc_spinlock_free -+ dwc_timer_alloc -+ dwc_waitq_alloc -+ dwc_thread_run -+ dwc_workq_alloc -+ dwc_task_alloc Also adds a 'char *name' as its 2nd parameter -+ -+And here are the core functions that have other changes to their parameters: -+ -+ dwc_spinlock_irqsave 'flags' param is now a 'dwc_irqflags_t *' -+ dwc_spinunlock_irqrestore 'flags' param is now a 'dwc_irqflags_t' -+ dwc_thread_should_stop Adds a 'dwc_thread_t *' parameter -+ -+ -+ -+The changes to the core functions also require some of the other library -+functions to change: -+ -+ dwc_cc_if_alloc() and dwc_cc_if_free() now take a 'void *memctx' -+ (for memory allocation) as the 1st param and a 'void *mtxctx' -+ (for mutex allocation) as the 2nd param. -+ -+ dwc_cc_clear(), dwc_cc_add(), dwc_cc_change(), dwc_cc_remove(), -+ dwc_cc_data_for_save(), and dwc_cc_restore_from_data() now take a -+ 'void *memctx' as the 1st param. -+ -+ dwc_dh_modpow(), dwc_dh_pk(), and dwc_dh_derive_keys() now take a -+ 'void *memctx' as the 1st param. -+ -+ dwc_modpow() now takes a 'void *memctx' as the 1st param. -+ -+ dwc_alloc_notification_manager() now takes a 'void *memctx' as the -+ 1st param and a 'void *wkqctx' (for work queue allocation) as the 2nd -+ param, and also now returns an integer value that is non-zero if -+ allocation of its data structures or work queue fails. -+ -+ dwc_register_notifier() now takes a 'void *memctx' as the 1st param. -+ -+ dwc_memory_debug_start() now takes a 'void *mem_ctx' as the first -+ param, and also now returns an integer value that is non-zero if -+ allocation of its data structures fails. -+ -+ -+ -+Other miscellaneous changes: -+ -+The DEBUG_MEMORY and DEBUG_REGS #define's have been renamed to -+DWC_DEBUG_MEMORY and DWC_DEBUG_REGS. -+ -+The following #define's have been added to allow selectively compiling library -+features: -+ -+ DWC_CCLIB -+ DWC_CRYPTOLIB -+ DWC_NOTIFYLIB -+ DWC_UTFLIB -+ -+A DWC_LIBMODULE #define has also been added. If this is not defined, then the -+module code in dwc_common_linux.c is not compiled in. This allows linking the -+library code directly into a driver module, instead of as a standalone module. ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/doc/doxygen.cfg -@@ -0,0 +1,270 @@ -+# Doxyfile 1.4.5 -+ -+#--------------------------------------------------------------------------- -+# Project related configuration options -+#--------------------------------------------------------------------------- -+PROJECT_NAME = "Synopsys DWC Portability and Common Library for UWB" -+PROJECT_NUMBER = -+OUTPUT_DIRECTORY = doc -+CREATE_SUBDIRS = NO -+OUTPUT_LANGUAGE = English -+BRIEF_MEMBER_DESC = YES -+REPEAT_BRIEF = YES -+ABBREVIATE_BRIEF = "The $name class" \ -+ "The $name widget" \ -+ "The $name file" \ -+ is \ -+ provides \ -+ specifies \ -+ contains \ -+ represents \ -+ a \ -+ an \ -+ the -+ALWAYS_DETAILED_SEC = YES -+INLINE_INHERITED_MEMB = NO -+FULL_PATH_NAMES = NO -+STRIP_FROM_PATH = .. -+STRIP_FROM_INC_PATH = -+SHORT_NAMES = NO -+JAVADOC_AUTOBRIEF = YES -+MULTILINE_CPP_IS_BRIEF = NO -+DETAILS_AT_TOP = YES -+INHERIT_DOCS = YES -+SEPARATE_MEMBER_PAGES = NO -+TAB_SIZE = 8 -+ALIASES = -+OPTIMIZE_OUTPUT_FOR_C = YES -+OPTIMIZE_OUTPUT_JAVA = NO -+BUILTIN_STL_SUPPORT = NO -+DISTRIBUTE_GROUP_DOC = NO -+SUBGROUPING = NO -+#--------------------------------------------------------------------------- -+# Build related configuration options -+#--------------------------------------------------------------------------- -+EXTRACT_ALL = NO -+EXTRACT_PRIVATE = NO -+EXTRACT_STATIC = YES -+EXTRACT_LOCAL_CLASSES = NO -+EXTRACT_LOCAL_METHODS = NO -+HIDE_UNDOC_MEMBERS = NO -+HIDE_UNDOC_CLASSES = NO -+HIDE_FRIEND_COMPOUNDS = NO -+HIDE_IN_BODY_DOCS = NO -+INTERNAL_DOCS = NO -+CASE_SENSE_NAMES = YES -+HIDE_SCOPE_NAMES = NO -+SHOW_INCLUDE_FILES = NO -+INLINE_INFO = YES -+SORT_MEMBER_DOCS = NO -+SORT_BRIEF_DOCS = NO -+SORT_BY_SCOPE_NAME = NO -+GENERATE_TODOLIST = YES -+GENERATE_TESTLIST = YES -+GENERATE_BUGLIST = YES -+GENERATE_DEPRECATEDLIST= YES -+ENABLED_SECTIONS = -+MAX_INITIALIZER_LINES = 30 -+SHOW_USED_FILES = YES -+SHOW_DIRECTORIES = YES -+FILE_VERSION_FILTER = -+#--------------------------------------------------------------------------- -+# configuration options related to warning and progress messages -+#--------------------------------------------------------------------------- -+QUIET = YES -+WARNINGS = YES -+WARN_IF_UNDOCUMENTED = NO -+WARN_IF_DOC_ERROR = YES -+WARN_NO_PARAMDOC = YES -+WARN_FORMAT = "$file:$line: $text" -+WARN_LOGFILE = -+#--------------------------------------------------------------------------- -+# configuration options related to the input files -+#--------------------------------------------------------------------------- -+INPUT = . -+FILE_PATTERNS = *.c \ -+ *.cc \ -+ *.cxx \ -+ *.cpp \ -+ *.c++ \ -+ *.d \ -+ *.java \ -+ *.ii \ -+ *.ixx \ -+ *.ipp \ -+ *.i++ \ -+ *.inl \ -+ *.h \ -+ *.hh \ -+ *.hxx \ -+ *.hpp \ -+ *.h++ \ -+ *.idl \ -+ *.odl \ -+ *.cs \ -+ *.php \ -+ *.php3 \ -+ *.inc \ -+ *.m \ -+ *.mm \ -+ *.dox \ -+ *.py \ -+ *.C \ -+ *.CC \ -+ *.C++ \ -+ *.II \ -+ *.I++ \ -+ *.H \ -+ *.HH \ -+ *.H++ \ -+ *.CS \ -+ *.PHP \ -+ *.PHP3 \ -+ *.M \ -+ *.MM \ -+ *.PY -+RECURSIVE = NO -+EXCLUDE = -+EXCLUDE_SYMLINKS = NO -+EXCLUDE_PATTERNS = -+EXAMPLE_PATH = -+EXAMPLE_PATTERNS = * -+EXAMPLE_RECURSIVE = NO -+IMAGE_PATH = -+INPUT_FILTER = -+FILTER_PATTERNS = -+FILTER_SOURCE_FILES = NO -+#--------------------------------------------------------------------------- -+# configuration options related to source browsing -+#--------------------------------------------------------------------------- -+SOURCE_BROWSER = NO -+INLINE_SOURCES = NO -+STRIP_CODE_COMMENTS = YES -+REFERENCED_BY_RELATION = YES -+REFERENCES_RELATION = YES -+USE_HTAGS = NO -+VERBATIM_HEADERS = NO -+#--------------------------------------------------------------------------- -+# configuration options related to the alphabetical class index -+#--------------------------------------------------------------------------- -+ALPHABETICAL_INDEX = NO -+COLS_IN_ALPHA_INDEX = 5 -+IGNORE_PREFIX = -+#--------------------------------------------------------------------------- -+# configuration options related to the HTML output -+#--------------------------------------------------------------------------- -+GENERATE_HTML = YES -+HTML_OUTPUT = html -+HTML_FILE_EXTENSION = .html -+HTML_HEADER = -+HTML_FOOTER = -+HTML_STYLESHEET = -+HTML_ALIGN_MEMBERS = YES -+GENERATE_HTMLHELP = NO -+CHM_FILE = -+HHC_LOCATION = -+GENERATE_CHI = NO -+BINARY_TOC = NO -+TOC_EXPAND = NO -+DISABLE_INDEX = NO -+ENUM_VALUES_PER_LINE = 4 -+GENERATE_TREEVIEW = YES -+TREEVIEW_WIDTH = 250 -+#--------------------------------------------------------------------------- -+# configuration options related to the LaTeX output -+#--------------------------------------------------------------------------- -+GENERATE_LATEX = NO -+LATEX_OUTPUT = latex -+LATEX_CMD_NAME = latex -+MAKEINDEX_CMD_NAME = makeindex -+COMPACT_LATEX = NO -+PAPER_TYPE = a4wide -+EXTRA_PACKAGES = -+LATEX_HEADER = -+PDF_HYPERLINKS = NO -+USE_PDFLATEX = NO -+LATEX_BATCHMODE = NO -+LATEX_HIDE_INDICES = NO -+#--------------------------------------------------------------------------- -+# configuration options related to the RTF output -+#--------------------------------------------------------------------------- -+GENERATE_RTF = NO -+RTF_OUTPUT = rtf -+COMPACT_RTF = NO -+RTF_HYPERLINKS = NO -+RTF_STYLESHEET_FILE = -+RTF_EXTENSIONS_FILE = -+#--------------------------------------------------------------------------- -+# configuration options related to the man page output -+#--------------------------------------------------------------------------- -+GENERATE_MAN = NO -+MAN_OUTPUT = man -+MAN_EXTENSION = .3 -+MAN_LINKS = NO -+#--------------------------------------------------------------------------- -+# configuration options related to the XML output -+#--------------------------------------------------------------------------- -+GENERATE_XML = NO -+XML_OUTPUT = xml -+XML_SCHEMA = -+XML_DTD = -+XML_PROGRAMLISTING = YES -+#--------------------------------------------------------------------------- -+# configuration options for the AutoGen Definitions output -+#--------------------------------------------------------------------------- -+GENERATE_AUTOGEN_DEF = NO -+#--------------------------------------------------------------------------- -+# configuration options related to the Perl module output -+#--------------------------------------------------------------------------- -+GENERATE_PERLMOD = NO -+PERLMOD_LATEX = NO -+PERLMOD_PRETTY = YES -+PERLMOD_MAKEVAR_PREFIX = -+#--------------------------------------------------------------------------- -+# Configuration options related to the preprocessor -+#--------------------------------------------------------------------------- -+ENABLE_PREPROCESSING = YES -+MACRO_EXPANSION = NO -+EXPAND_ONLY_PREDEF = NO -+SEARCH_INCLUDES = YES -+INCLUDE_PATH = -+INCLUDE_FILE_PATTERNS = -+PREDEFINED = DEBUG DEBUG_MEMORY -+EXPAND_AS_DEFINED = -+SKIP_FUNCTION_MACROS = YES -+#--------------------------------------------------------------------------- -+# Configuration::additions related to external references -+#--------------------------------------------------------------------------- -+TAGFILES = -+GENERATE_TAGFILE = -+ALLEXTERNALS = NO -+EXTERNAL_GROUPS = YES -+PERL_PATH = /usr/bin/perl -+#--------------------------------------------------------------------------- -+# Configuration options related to the dot tool -+#--------------------------------------------------------------------------- -+CLASS_DIAGRAMS = YES -+HIDE_UNDOC_RELATIONS = YES -+HAVE_DOT = NO -+CLASS_GRAPH = YES -+COLLABORATION_GRAPH = YES -+GROUP_GRAPHS = YES -+UML_LOOK = NO -+TEMPLATE_RELATIONS = NO -+INCLUDE_GRAPH = NO -+INCLUDED_BY_GRAPH = YES -+CALL_GRAPH = NO -+GRAPHICAL_HIERARCHY = YES -+DIRECTORY_GRAPH = YES -+DOT_IMAGE_FORMAT = png -+DOT_PATH = -+DOTFILE_DIRS = -+MAX_DOT_GRAPH_DEPTH = 1000 -+DOT_TRANSPARENT = NO -+DOT_MULTI_TARGETS = NO -+GENERATE_LEGEND = YES -+DOT_CLEANUP = YES -+#--------------------------------------------------------------------------- -+# Configuration::additions related to the search engine -+#--------------------------------------------------------------------------- -+SEARCHENGINE = NO ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_cc.c -@@ -0,0 +1,532 @@ -+/* ========================================================================= -+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.c $ -+ * $Revision: #4 $ -+ * $Date: 2010/11/04 $ -+ * $Change: 1621692 $ -+ * -+ * Synopsys Portability Library Software and documentation -+ * (hereinafter, "Software") is an Unsupported proprietary work of -+ * Synopsys, Inc. unless otherwise expressly agreed to in writing -+ * between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product -+ * under any End User Software License Agreement or Agreement for -+ * Licensed Product with Synopsys or any supplement thereto. You are -+ * permitted to use and redistribute this Software in source and binary -+ * forms, with or without modification, provided that redistributions -+ * of source code must retain this notice. You may not view, use, -+ * disclose, copy or distribute this file or any information contained -+ * herein except pursuant to this license grant from Synopsys. If you -+ * do not agree with this notice, including the disclaimer below, then -+ * you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" -+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL -+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY -+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================= */ -+#ifdef DWC_CCLIB -+ -+#include "dwc_cc.h" -+ -+typedef struct dwc_cc -+{ -+ uint32_t uid; -+ uint8_t chid[16]; -+ uint8_t cdid[16]; -+ uint8_t ck[16]; -+ uint8_t *name; -+ uint8_t length; -+ DWC_CIRCLEQ_ENTRY(dwc_cc) list_entry; -+} dwc_cc_t; -+ -+DWC_CIRCLEQ_HEAD(context_list, dwc_cc); -+ -+/** The main structure for CC management. */ -+struct dwc_cc_if -+{ -+ dwc_mutex_t *mutex; -+ char *filename; -+ -+ unsigned is_host:1; -+ -+ dwc_notifier_t *notifier; -+ -+ struct context_list list; -+}; -+ -+#ifdef DEBUG -+static inline void dump_bytes(char *name, uint8_t *bytes, int len) -+{ -+ int i; -+ DWC_PRINTF("%s: ", name); -+ for (i=0; ilength = length; -+ cc->name = dwc_alloc(mem_ctx, length); -+ if (!cc->name) { -+ dwc_free(mem_ctx, cc); -+ return NULL; -+ } -+ -+ DWC_MEMCPY(cc->name, name, length); -+ } -+ -+ return cc; -+} -+ -+static void free_cc(void *mem_ctx, dwc_cc_t *cc) -+{ -+ if (cc->name) { -+ dwc_free(mem_ctx, cc->name); -+ } -+ dwc_free(mem_ctx, cc); -+} -+ -+static uint32_t next_uid(dwc_cc_if_t *cc_if) -+{ -+ uint32_t uid = 0; -+ dwc_cc_t *cc; -+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { -+ if (cc->uid > uid) { -+ uid = cc->uid; -+ } -+ } -+ -+ if (uid == 0) { -+ uid = 255; -+ } -+ -+ return uid + 1; -+} -+ -+static dwc_cc_t *cc_find(dwc_cc_if_t *cc_if, uint32_t uid) -+{ -+ dwc_cc_t *cc; -+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { -+ if (cc->uid == uid) { -+ return cc; -+ } -+ } -+ return NULL; -+} -+ -+static unsigned int cc_data_size(dwc_cc_if_t *cc_if) -+{ -+ unsigned int size = 0; -+ dwc_cc_t *cc; -+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { -+ size += (48 + 1); -+ if (cc->name) { -+ size += cc->length; -+ } -+ } -+ return size; -+} -+ -+static uint32_t cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid) -+{ -+ uint32_t uid = 0; -+ dwc_cc_t *cc; -+ -+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { -+ if (DWC_MEMCMP(cc->chid, chid, 16) == 0) { -+ uid = cc->uid; -+ break; -+ } -+ } -+ return uid; -+} -+static uint32_t cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid) -+{ -+ uint32_t uid = 0; -+ dwc_cc_t *cc; -+ -+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { -+ if (DWC_MEMCMP(cc->cdid, cdid, 16) == 0) { -+ uid = cc->uid; -+ break; -+ } -+ } -+ return uid; -+} -+ -+/* Internal cc_add */ -+static int32_t cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid, -+ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) -+{ -+ dwc_cc_t *cc; -+ uint32_t uid; -+ -+ if (cc_if->is_host) { -+ uid = cc_match_cdid(cc_if, cdid); -+ } -+ else { -+ uid = cc_match_chid(cc_if, chid); -+ } -+ -+ if (uid) { -+ DWC_DEBUGC("Replacing previous connection context id=%d name=%p name_len=%d", uid, name, length); -+ cc = cc_find(cc_if, uid); -+ } -+ else { -+ cc = alloc_cc(mem_ctx, name, length); -+ cc->uid = next_uid(cc_if); -+ DWC_CIRCLEQ_INSERT_TAIL(&cc_if->list, cc, list_entry); -+ } -+ -+ DWC_MEMCPY(&(cc->chid[0]), chid, 16); -+ DWC_MEMCPY(&(cc->cdid[0]), cdid, 16); -+ DWC_MEMCPY(&(cc->ck[0]), ck, 16); -+ -+ DWC_DEBUGC("Added connection context id=%d name=%p name_len=%d", cc->uid, name, length); -+ dump_bytes("CHID", cc->chid, 16); -+ dump_bytes("CDID", cc->cdid, 16); -+ dump_bytes("CK", cc->ck, 16); -+ return cc->uid; -+} -+ -+/* Internal cc_clear */ -+static void cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if) -+{ -+ while (!DWC_CIRCLEQ_EMPTY(&cc_if->list)) { -+ dwc_cc_t *cc = DWC_CIRCLEQ_FIRST(&cc_if->list); -+ DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry); -+ free_cc(mem_ctx, cc); -+ } -+} -+ -+dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx, -+ dwc_notifier_t *notifier, unsigned is_host) -+{ -+ dwc_cc_if_t *cc_if = NULL; -+ -+ /* Allocate a common_cc_if structure */ -+ cc_if = dwc_alloc(mem_ctx, sizeof(dwc_cc_if_t)); -+ -+ if (!cc_if) -+ return NULL; -+ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) -+ DWC_MUTEX_ALLOC_LINUX_DEBUG(cc_if->mutex); -+#else -+ cc_if->mutex = dwc_mutex_alloc(mtx_ctx); -+#endif -+ if (!cc_if->mutex) { -+ dwc_free(mem_ctx, cc_if); -+ return NULL; -+ } -+ -+ DWC_CIRCLEQ_INIT(&cc_if->list); -+ cc_if->is_host = is_host; -+ cc_if->notifier = notifier; -+ return cc_if; -+} -+ -+void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if) -+{ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) -+ DWC_MUTEX_FREE(cc_if->mutex); -+#else -+ dwc_mutex_free(mtx_ctx, cc_if->mutex); -+#endif -+ cc_clear(mem_ctx, cc_if); -+ dwc_free(mem_ctx, cc_if); -+} -+ -+static void cc_changed(dwc_cc_if_t *cc_if) -+{ -+ if (cc_if->notifier) { -+ dwc_notify(cc_if->notifier, DWC_CC_LIST_CHANGED_NOTIFICATION, cc_if); -+ } -+} -+ -+void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if) -+{ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ cc_clear(mem_ctx, cc_if); -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ cc_changed(cc_if); -+} -+ -+int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid, -+ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) -+{ -+ uint32_t uid; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ uid = cc_add(mem_ctx, cc_if, chid, cdid, ck, name, length); -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ cc_changed(cc_if); -+ -+ return uid; -+} -+ -+void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id, uint8_t *chid, -+ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) -+{ -+ dwc_cc_t* cc; -+ -+ DWC_DEBUGC("Change connection context %d", id); -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ cc = cc_find(cc_if, id); -+ if (!cc) { -+ DWC_ERROR("Uid %d not found in cc list\n", id); -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ return; -+ } -+ -+ if (chid) { -+ DWC_MEMCPY(&(cc->chid[0]), chid, 16); -+ } -+ if (cdid) { -+ DWC_MEMCPY(&(cc->cdid[0]), cdid, 16); -+ } -+ if (ck) { -+ DWC_MEMCPY(&(cc->ck[0]), ck, 16); -+ } -+ -+ if (name) { -+ if (cc->name) { -+ dwc_free(mem_ctx, cc->name); -+ } -+ cc->name = dwc_alloc(mem_ctx, length); -+ if (!cc->name) { -+ DWC_ERROR("Out of memory in dwc_cc_change()\n"); -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ return; -+ } -+ cc->length = length; -+ DWC_MEMCPY(cc->name, name, length); -+ } -+ -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ -+ cc_changed(cc_if); -+ -+ DWC_DEBUGC("Changed connection context id=%d\n", id); -+ dump_bytes("New CHID", cc->chid, 16); -+ dump_bytes("New CDID", cc->cdid, 16); -+ dump_bytes("New CK", cc->ck, 16); -+} -+ -+void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id) -+{ -+ dwc_cc_t *cc; -+ -+ DWC_DEBUGC("Removing connection context %d", id); -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ cc = cc_find(cc_if, id); -+ if (!cc) { -+ DWC_ERROR("Uid %d not found in cc list\n", id); -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ return; -+ } -+ -+ DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry); -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ free_cc(mem_ctx, cc); -+ -+ cc_changed(cc_if); -+} -+ -+uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if, unsigned int *length) -+{ -+ uint8_t *buf, *x; -+ uint8_t zero = 0; -+ dwc_cc_t *cc; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ *length = cc_data_size(cc_if); -+ if (!(*length)) { -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ return NULL; -+ } -+ -+ DWC_DEBUGC("Creating data for saving (length=%d)", *length); -+ -+ buf = dwc_alloc(mem_ctx, *length); -+ if (!buf) { -+ *length = 0; -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ return NULL; -+ } -+ -+ x = buf; -+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { -+ DWC_MEMCPY(x, cc->chid, 16); -+ x += 16; -+ DWC_MEMCPY(x, cc->cdid, 16); -+ x += 16; -+ DWC_MEMCPY(x, cc->ck, 16); -+ x += 16; -+ if (cc->name) { -+ DWC_MEMCPY(x, &cc->length, 1); -+ x += 1; -+ DWC_MEMCPY(x, cc->name, cc->length); -+ x += cc->length; -+ } -+ else { -+ DWC_MEMCPY(x, &zero, 1); -+ x += 1; -+ } -+ } -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ -+ return buf; -+} -+ -+void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *data, uint32_t length) -+{ -+ uint8_t name_length; -+ uint8_t *name; -+ uint8_t *chid; -+ uint8_t *cdid; -+ uint8_t *ck; -+ uint32_t i = 0; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ cc_clear(mem_ctx, cc_if); -+ -+ while (i < length) { -+ chid = &data[i]; -+ i += 16; -+ cdid = &data[i]; -+ i += 16; -+ ck = &data[i]; -+ i += 16; -+ -+ name_length = data[i]; -+ i ++; -+ -+ if (name_length) { -+ name = &data[i]; -+ i += name_length; -+ } -+ else { -+ name = NULL; -+ } -+ -+ /* check to see if we haven't overflown the buffer */ -+ if (i > length) { -+ DWC_ERROR("Data format error while attempting to load CCs " -+ "(nlen=%d, iter=%d, buflen=%d).\n", name_length, i, length); -+ break; -+ } -+ -+ cc_add(mem_ctx, cc_if, chid, cdid, ck, name, name_length); -+ } -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ -+ cc_changed(cc_if); -+} -+ -+uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid) -+{ -+ uint32_t uid = 0; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ uid = cc_match_chid(cc_if, chid); -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ return uid; -+} -+uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid) -+{ -+ uint32_t uid = 0; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ uid = cc_match_cdid(cc_if, cdid); -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ return uid; -+} -+ -+uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id) -+{ -+ uint8_t *ck = NULL; -+ dwc_cc_t *cc; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ cc = cc_find(cc_if, id); -+ if (cc) { -+ ck = cc->ck; -+ } -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ -+ return ck; -+ -+} -+ -+uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id) -+{ -+ uint8_t *retval = NULL; -+ dwc_cc_t *cc; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ cc = cc_find(cc_if, id); -+ if (cc) { -+ retval = cc->chid; -+ } -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ -+ return retval; -+} -+ -+uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id) -+{ -+ uint8_t *retval = NULL; -+ dwc_cc_t *cc; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ cc = cc_find(cc_if, id); -+ if (cc) { -+ retval = cc->cdid; -+ } -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ -+ return retval; -+} -+ -+uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length) -+{ -+ uint8_t *retval = NULL; -+ dwc_cc_t *cc; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ *length = 0; -+ cc = cc_find(cc_if, id); -+ if (cc) { -+ *length = cc->length; -+ retval = cc->name; -+ } -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ -+ return retval; -+} -+ -+#endif /* DWC_CCLIB */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_cc.h -@@ -0,0 +1,224 @@ -+/* ========================================================================= -+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.h $ -+ * $Revision: #4 $ -+ * $Date: 2010/09/28 $ -+ * $Change: 1596182 $ -+ * -+ * Synopsys Portability Library Software and documentation -+ * (hereinafter, "Software") is an Unsupported proprietary work of -+ * Synopsys, Inc. unless otherwise expressly agreed to in writing -+ * between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product -+ * under any End User Software License Agreement or Agreement for -+ * Licensed Product with Synopsys or any supplement thereto. You are -+ * permitted to use and redistribute this Software in source and binary -+ * forms, with or without modification, provided that redistributions -+ * of source code must retain this notice. You may not view, use, -+ * disclose, copy or distribute this file or any information contained -+ * herein except pursuant to this license grant from Synopsys. If you -+ * do not agree with this notice, including the disclaimer below, then -+ * you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" -+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL -+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY -+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================= */ -+#ifndef _DWC_CC_H_ -+#define _DWC_CC_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/** @file -+ * -+ * This file defines the Context Context library. -+ * -+ * The main data structure is dwc_cc_if_t which is returned by either the -+ * dwc_cc_if_alloc function or returned by the module to the user via a provided -+ * function. The data structure is opaque and should only be manipulated via the -+ * functions provied in this API. -+ * -+ * It manages a list of connection contexts and operations can be performed to -+ * add, remove, query, search, and change, those contexts. Additionally, -+ * a dwc_notifier_t object can be requested from the manager so that -+ * the user can be notified whenever the context list has changed. -+ */ -+ -+#include "dwc_os.h" -+#include "dwc_list.h" -+#include "dwc_notifier.h" -+ -+ -+/* Notifications */ -+#define DWC_CC_LIST_CHANGED_NOTIFICATION "DWC_CC_LIST_CHANGED_NOTIFICATION" -+ -+struct dwc_cc_if; -+typedef struct dwc_cc_if dwc_cc_if_t; -+ -+ -+/** @name Connection Context Operations */ -+/** @{ */ -+ -+/** This function allocates memory for a dwc_cc_if_t structure, initializes -+ * fields to default values, and returns a pointer to the structure or NULL on -+ * error. */ -+extern dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx, -+ dwc_notifier_t *notifier, unsigned is_host); -+ -+/** Frees the memory for the specified CC structure allocated from -+ * dwc_cc_if_alloc(). */ -+extern void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if); -+ -+/** Removes all contexts from the connection context list */ -+extern void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if); -+ -+/** Adds a connection context (CHID, CK, CDID, Name) to the connection context list. -+ * If a CHID already exists, the CK and name are overwritten. Statistics are -+ * not overwritten. -+ * -+ * @param cc_if The cc_if structure. -+ * @param chid A pointer to the 16-byte CHID. This value will be copied. -+ * @param ck A pointer to the 16-byte CK. This value will be copied. -+ * @param cdid A pointer to the 16-byte CDID. This value will be copied. -+ * @param name An optional host friendly name as defined in the association model -+ * spec. Must be a UTF16-LE unicode string. Can be NULL to indicated no name. -+ * @param length The length othe unicode string. -+ * @return A unique identifier used to refer to this context that is valid for -+ * as long as this context is still in the list. */ -+extern int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid, -+ uint8_t *cdid, uint8_t *ck, uint8_t *name, -+ uint8_t length); -+ -+/** Changes the CHID, CK, CDID, or Name values of a connection context in the -+ * list, preserving any accumulated statistics. This would typically be called -+ * if the host decideds to change the context with a SET_CONNECTION request. -+ * -+ * @param cc_if The cc_if structure. -+ * @param id The identifier of the connection context. -+ * @param chid A pointer to the 16-byte CHID. This value will be copied. NULL -+ * indicates no change. -+ * @param cdid A pointer to the 16-byte CDID. This value will be copied. NULL -+ * indicates no change. -+ * @param ck A pointer to the 16-byte CK. This value will be copied. NULL -+ * indicates no change. -+ * @param name Host friendly name UTF16-LE. NULL indicates no change. -+ * @param length Length of name. */ -+extern void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id, -+ uint8_t *chid, uint8_t *cdid, uint8_t *ck, -+ uint8_t *name, uint8_t length); -+ -+/** Remove the specified connection context. -+ * @param cc_if The cc_if structure. -+ * @param id The identifier of the connection context to remove. */ -+extern void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id); -+ -+/** Get a binary block of data for the connection context list and attributes. -+ * This data can be used by the OS specific driver to save the connection -+ * context list into non-volatile memory. -+ * -+ * @param cc_if The cc_if structure. -+ * @param length Return the length of the data buffer. -+ * @return A pointer to the data buffer. The memory for this buffer should be -+ * freed with DWC_FREE() after use. */ -+extern uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if, -+ unsigned int *length); -+ -+/** Restore the connection context list from the binary data that was previously -+ * returned from a call to dwc_cc_data_for_save. This can be used by the OS specific -+ * driver to load a connection context list from non-volatile memory. -+ * -+ * @param cc_if The cc_if structure. -+ * @param data The data bytes as returned from dwc_cc_data_for_save. -+ * @param length The length of the data. */ -+extern void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if, -+ uint8_t *data, unsigned int length); -+ -+/** Find the connection context from the specified CHID. -+ * -+ * @param cc_if The cc_if structure. -+ * @param chid A pointer to the CHID data. -+ * @return A non-zero identifier of the connection context if the CHID matches. -+ * Otherwise returns 0. */ -+extern uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid); -+ -+/** Find the connection context from the specified CDID. -+ * -+ * @param cc_if The cc_if structure. -+ * @param cdid A pointer to the CDID data. -+ * @return A non-zero identifier of the connection context if the CHID matches. -+ * Otherwise returns 0. */ -+extern uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid); -+ -+/** Retrieve the CK from the specified connection context. -+ * -+ * @param cc_if The cc_if structure. -+ * @param id The identifier of the connection context. -+ * @return A pointer to the CK data. The memory does not need to be freed. */ -+extern uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id); -+ -+/** Retrieve the CHID from the specified connection context. -+ * -+ * @param cc_if The cc_if structure. -+ * @param id The identifier of the connection context. -+ * @return A pointer to the CHID data. The memory does not need to be freed. */ -+extern uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id); -+ -+/** Retrieve the CDID from the specified connection context. -+ * -+ * @param cc_if The cc_if structure. -+ * @param id The identifier of the connection context. -+ * @return A pointer to the CDID data. The memory does not need to be freed. */ -+extern uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id); -+ -+extern uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length); -+ -+/** Checks a buffer for non-zero. -+ * @param id A pointer to a 16 byte buffer. -+ * @return true if the 16 byte value is non-zero. */ -+static inline unsigned dwc_assoc_is_not_zero_id(uint8_t *id) { -+ int i; -+ for (i=0; i<16; i++) { -+ if (id[i]) return 1; -+ } -+ return 0; -+} -+ -+/** Checks a buffer for zero. -+ * @param id A pointer to a 16 byte buffer. -+ * @return true if the 16 byte value is zero. */ -+static inline unsigned dwc_assoc_is_zero_id(uint8_t *id) { -+ return !dwc_assoc_is_not_zero_id(id); -+} -+ -+/** Prints an ASCII representation for the 16-byte chid, cdid, or ck, into -+ * buffer. */ -+static inline int dwc_print_id_string(char *buffer, uint8_t *id) { -+ char *ptr = buffer; -+ int i; -+ for (i=0; i<16; i++) { -+ ptr += DWC_SPRINTF(ptr, "%02x", id[i]); -+ if (i < 15) { -+ ptr += DWC_SPRINTF(ptr, " "); -+ } -+ } -+ return ptr - buffer; -+} -+ -+/** @} */ -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _DWC_CC_H_ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c -@@ -0,0 +1,1308 @@ -+#include "dwc_os.h" -+#include "dwc_list.h" -+ -+#ifdef DWC_CCLIB -+# include "dwc_cc.h" -+#endif -+ -+#ifdef DWC_CRYPTOLIB -+# include "dwc_modpow.h" -+# include "dwc_dh.h" -+# include "dwc_crypto.h" -+#endif -+ -+#ifdef DWC_NOTIFYLIB -+# include "dwc_notifier.h" -+#endif -+ -+/* OS-Level Implementations */ -+ -+/* This is the FreeBSD 7.0 kernel implementation of the DWC platform library. */ -+ -+ -+/* MISC */ -+ -+void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size) -+{ -+ return memset(dest, byte, size); -+} -+ -+void *DWC_MEMCPY(void *dest, void const *src, uint32_t size) -+{ -+ return memcpy(dest, src, size); -+} -+ -+void *DWC_MEMMOVE(void *dest, void *src, uint32_t size) -+{ -+ bcopy(src, dest, size); -+ return dest; -+} -+ -+int DWC_MEMCMP(void *m1, void *m2, uint32_t size) -+{ -+ return memcmp(m1, m2, size); -+} -+ -+int DWC_STRNCMP(void *s1, void *s2, uint32_t size) -+{ -+ return strncmp(s1, s2, size); -+} -+ -+int DWC_STRCMP(void *s1, void *s2) -+{ -+ return strcmp(s1, s2); -+} -+ -+int DWC_STRLEN(char const *str) -+{ -+ return strlen(str); -+} -+ -+char *DWC_STRCPY(char *to, char const *from) -+{ -+ return strcpy(to, from); -+} -+ -+char *DWC_STRDUP(char const *str) -+{ -+ int len = DWC_STRLEN(str) + 1; -+ char *new = DWC_ALLOC_ATOMIC(len); -+ -+ if (!new) { -+ return NULL; -+ } -+ -+ DWC_MEMCPY(new, str, len); -+ return new; -+} -+ -+int DWC_ATOI(char *str, int32_t *value) -+{ -+ char *end = NULL; -+ -+ *value = strtol(str, &end, 0); -+ if (*end == '\0') { -+ return 0; -+ } -+ -+ return -1; -+} -+ -+int DWC_ATOUI(char *str, uint32_t *value) -+{ -+ char *end = NULL; -+ -+ *value = strtoul(str, &end, 0); -+ if (*end == '\0') { -+ return 0; -+ } -+ -+ return -1; -+} -+ -+ -+#ifdef DWC_UTFLIB -+/* From usbstring.c */ -+ -+int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len) -+{ -+ int count = 0; -+ u8 c; -+ u16 uchar; -+ -+ /* this insists on correct encodings, though not minimal ones. -+ * BUT it currently rejects legit 4-byte UTF-8 code points, -+ * which need surrogate pairs. (Unicode 3.1 can use them.) -+ */ -+ while (len != 0 && (c = (u8) *s++) != 0) { -+ if (unlikely(c & 0x80)) { -+ // 2-byte sequence: -+ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx -+ if ((c & 0xe0) == 0xc0) { -+ uchar = (c & 0x1f) << 6; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c; -+ -+ // 3-byte sequence (most CJKV characters): -+ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx -+ } else if ((c & 0xf0) == 0xe0) { -+ uchar = (c & 0x0f) << 12; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c << 6; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c; -+ -+ /* no bogus surrogates */ -+ if (0xd800 <= uchar && uchar <= 0xdfff) -+ goto fail; -+ -+ // 4-byte sequence (surrogate pairs, currently rare): -+ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx -+ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx -+ // (uuuuu = wwww + 1) -+ // FIXME accept the surrogate code points (only) -+ } else -+ goto fail; -+ } else -+ uchar = c; -+ put_unaligned (cpu_to_le16 (uchar), cp++); -+ count++; -+ len--; -+ } -+ return count; -+fail: -+ return -1; -+} -+ -+#endif /* DWC_UTFLIB */ -+ -+ -+/* dwc_debug.h */ -+ -+dwc_bool_t DWC_IN_IRQ(void) -+{ -+// return in_irq(); -+ return 0; -+} -+ -+dwc_bool_t DWC_IN_BH(void) -+{ -+// return in_softirq(); -+ return 0; -+} -+ -+void DWC_VPRINTF(char *format, va_list args) -+{ -+ vprintf(format, args); -+} -+ -+int DWC_VSNPRINTF(char *str, int size, char *format, va_list args) -+{ -+ return vsnprintf(str, size, format, args); -+} -+ -+void DWC_PRINTF(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+int DWC_SPRINTF(char *buffer, char *format, ...) -+{ -+ int retval; -+ va_list args; -+ -+ va_start(args, format); -+ retval = vsprintf(buffer, format, args); -+ va_end(args); -+ return retval; -+} -+ -+int DWC_SNPRINTF(char *buffer, int size, char *format, ...) -+{ -+ int retval; -+ va_list args; -+ -+ va_start(args, format); -+ retval = vsnprintf(buffer, size, format, args); -+ va_end(args); -+ return retval; -+} -+ -+void __DWC_WARN(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+void __DWC_ERROR(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+void DWC_EXCEPTION(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+// BUG_ON(1); ??? -+} -+ -+#ifdef DEBUG -+void __DWC_DEBUG(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+#endif -+ -+ -+/* dwc_mem.h */ -+ -+#if 0 -+dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, -+ uint32_t align, -+ uint32_t alloc) -+{ -+ struct dma_pool *pool = dma_pool_create("Pool", NULL, -+ size, align, alloc); -+ return (dwc_pool_t *)pool; -+} -+ -+void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool) -+{ -+ dma_pool_destroy((struct dma_pool *)pool); -+} -+ -+void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr) -+{ -+// return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr); -+ return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr); -+} -+ -+void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr) -+{ -+ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr); -+ memset(..); -+} -+ -+void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr) -+{ -+ dma_pool_free(pool, vaddr, daddr); -+} -+#endif -+ -+static void dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) -+{ -+ if (error) -+ return; -+ *(bus_addr_t *)arg = segs[0].ds_addr; -+} -+ -+void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) -+{ -+ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; -+ int error; -+ -+ error = bus_dma_tag_create( -+#if __FreeBSD_version >= 700000 -+ bus_get_dma_tag(dma->dev), /* parent */ -+#else -+ NULL, /* parent */ -+#endif -+ 4, 0, /* alignment, bounds */ -+ BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ -+ BUS_SPACE_MAXADDR, /* highaddr */ -+ NULL, NULL, /* filter, filterarg */ -+ size, /* maxsize */ -+ 1, /* nsegments */ -+ size, /* maxsegsize */ -+ 0, /* flags */ -+ NULL, /* lockfunc */ -+ NULL, /* lockarg */ -+ &dma->dma_tag); -+ if (error) { -+ device_printf(dma->dev, "%s: bus_dma_tag_create failed: %d\n", -+ __func__, error); -+ goto fail_0; -+ } -+ -+ error = bus_dmamem_alloc(dma->dma_tag, &dma->dma_vaddr, -+ BUS_DMA_NOWAIT | BUS_DMA_COHERENT, &dma->dma_map); -+ if (error) { -+ device_printf(dma->dev, "%s: bus_dmamem_alloc(%ju) failed: %d\n", -+ __func__, (uintmax_t)size, error); -+ goto fail_1; -+ } -+ -+ dma->dma_paddr = 0; -+ error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr, size, -+ dmamap_cb, &dma->dma_paddr, BUS_DMA_NOWAIT); -+ if (error || dma->dma_paddr == 0) { -+ device_printf(dma->dev, "%s: bus_dmamap_load failed: %d\n", -+ __func__, error); -+ goto fail_2; -+ } -+ -+ *dma_addr = dma->dma_paddr; -+ return dma->dma_vaddr; -+ -+fail_2: -+ bus_dmamap_unload(dma->dma_tag, dma->dma_map); -+fail_1: -+ bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map); -+ bus_dma_tag_destroy(dma->dma_tag); -+fail_0: -+ dma->dma_map = NULL; -+ dma->dma_tag = NULL; -+ -+ return NULL; -+} -+ -+void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr) -+{ -+ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; -+ -+ if (dma->dma_tag == NULL) -+ return; -+ if (dma->dma_map != NULL) { -+ bus_dmamap_sync(dma->dma_tag, dma->dma_map, -+ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); -+ bus_dmamap_unload(dma->dma_tag, dma->dma_map); -+ bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map); -+ dma->dma_map = NULL; -+ } -+ -+ bus_dma_tag_destroy(dma->dma_tag); -+ dma->dma_tag = NULL; -+} -+ -+void *__DWC_ALLOC(void *mem_ctx, uint32_t size) -+{ -+ return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO); -+} -+ -+void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size) -+{ -+ return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO); -+} -+ -+void __DWC_FREE(void *mem_ctx, void *addr) -+{ -+ free(addr, M_DEVBUF); -+} -+ -+ -+#ifdef DWC_CRYPTOLIB -+/* dwc_crypto.h */ -+ -+void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length) -+{ -+ get_random_bytes(buffer, length); -+} -+ -+int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out) -+{ -+ struct crypto_blkcipher *tfm; -+ struct blkcipher_desc desc; -+ struct scatterlist sgd; -+ struct scatterlist sgs; -+ -+ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); -+ if (tfm == NULL) { -+ printk("failed to load transform for aes CBC\n"); -+ return -1; -+ } -+ -+ crypto_blkcipher_setkey(tfm, key, keylen); -+ crypto_blkcipher_set_iv(tfm, iv, 16); -+ -+ sg_init_one(&sgd, out, messagelen); -+ sg_init_one(&sgs, message, messagelen); -+ -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) { -+ crypto_free_blkcipher(tfm); -+ DWC_ERROR("AES CBC encryption failed"); -+ return -1; -+ } -+ -+ crypto_free_blkcipher(tfm); -+ return 0; -+} -+ -+int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out) -+{ -+ struct crypto_hash *tfm; -+ struct hash_desc desc; -+ struct scatterlist sg; -+ -+ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC); -+ if (IS_ERR(tfm)) { -+ DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm)); -+ return 0; -+ } -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ sg_init_one(&sg, message, len); -+ crypto_hash_digest(&desc, &sg, len, out); -+ crypto_free_hash(tfm); -+ -+ return 1; -+} -+ -+int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, -+ uint8_t *key, uint32_t keylen, uint8_t *out) -+{ -+ struct crypto_hash *tfm; -+ struct hash_desc desc; -+ struct scatterlist sg; -+ -+ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC); -+ if (IS_ERR(tfm)) { -+ DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm)); -+ return 0; -+ } -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ sg_init_one(&sg, message, messagelen); -+ crypto_hash_setkey(tfm, key, keylen); -+ crypto_hash_digest(&desc, &sg, messagelen, out); -+ crypto_free_hash(tfm); -+ -+ return 1; -+} -+ -+#endif /* DWC_CRYPTOLIB */ -+ -+ -+/* Byte Ordering Conversions */ -+ -+uint32_t DWC_CPU_TO_LE32(uint32_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_CPU_TO_BE32(uint32_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_LE32_TO_CPU(uint32_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_BE32_TO_CPU(uint32_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint16_t DWC_CPU_TO_LE16(uint16_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_CPU_TO_BE16(uint16_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_LE16_TO_CPU(uint16_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_BE16_TO_CPU(uint16_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+ -+/* Registers */ -+ -+uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ return bus_space_read_4(io->iot, io->ioh, ior); -+} -+ -+#if 0 -+uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ return bus_space_read_8(io->iot, io->ioh, ior); -+} -+#endif -+ -+void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ bus_space_write_4(io->iot, io->ioh, ior, value); -+} -+ -+#if 0 -+void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ bus_space_write_8(io->iot, io->ioh, ior, value); -+} -+#endif -+ -+void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, -+ uint32_t set_mask) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ bus_space_write_4(io->iot, io->ioh, ior, -+ (bus_space_read_4(io->iot, io->ioh, ior) & -+ ~clear_mask) | set_mask); -+} -+ -+#if 0 -+void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, -+ uint64_t set_mask) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ bus_space_write_8(io->iot, io->ioh, ior, -+ (bus_space_read_8(io->iot, io->ioh, ior) & -+ ~clear_mask) | set_mask); -+} -+#endif -+ -+ -+/* Locking */ -+ -+dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void) -+{ -+ struct mtx *sl = DWC_ALLOC(sizeof(*sl)); -+ -+ if (!sl) { -+ DWC_ERROR("Cannot allocate memory for spinlock"); -+ return NULL; -+ } -+ -+ mtx_init(sl, "dw3spn", NULL, MTX_SPIN); -+ return (dwc_spinlock_t *)sl; -+} -+ -+void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock) -+{ -+ struct mtx *sl = (struct mtx *)lock; -+ -+ mtx_destroy(sl); -+ DWC_FREE(sl); -+} -+ -+void DWC_SPINLOCK(dwc_spinlock_t *lock) -+{ -+ mtx_lock_spin((struct mtx *)lock); // ??? -+} -+ -+void DWC_SPINUNLOCK(dwc_spinlock_t *lock) -+{ -+ mtx_unlock_spin((struct mtx *)lock); // ??? -+} -+ -+void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags) -+{ -+ mtx_lock_spin((struct mtx *)lock); -+} -+ -+void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags) -+{ -+ mtx_unlock_spin((struct mtx *)lock); -+} -+ -+dwc_mutex_t *DWC_MUTEX_ALLOC(void) -+{ -+ struct mtx *m; -+ dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mtx)); -+ -+ if (!mutex) { -+ DWC_ERROR("Cannot allocate memory for mutex"); -+ return NULL; -+ } -+ -+ m = (struct mtx *)mutex; -+ mtx_init(m, "dw3mtx", NULL, MTX_DEF); -+ return mutex; -+} -+ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) -+#else -+void DWC_MUTEX_FREE(dwc_mutex_t *mutex) -+{ -+ mtx_destroy((struct mtx *)mutex); -+ DWC_FREE(mutex); -+} -+#endif -+ -+void DWC_MUTEX_LOCK(dwc_mutex_t *mutex) -+{ -+ struct mtx *m = (struct mtx *)mutex; -+ -+ mtx_lock(m); -+} -+ -+int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex) -+{ -+ struct mtx *m = (struct mtx *)mutex; -+ -+ return mtx_trylock(m); -+} -+ -+void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex) -+{ -+ struct mtx *m = (struct mtx *)mutex; -+ -+ mtx_unlock(m); -+} -+ -+ -+/* Timing */ -+ -+void DWC_UDELAY(uint32_t usecs) -+{ -+ DELAY(usecs); -+} -+ -+void DWC_MDELAY(uint32_t msecs) -+{ -+ do { -+ DELAY(1000); -+ } while (--msecs); -+} -+ -+void DWC_MSLEEP(uint32_t msecs) -+{ -+ struct timeval tv; -+ -+ tv.tv_sec = msecs / 1000; -+ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; -+ pause("dw3slp", tvtohz(&tv)); -+} -+ -+uint32_t DWC_TIME(void) -+{ -+ struct timeval tv; -+ -+ microuptime(&tv); // or getmicrouptime? (less precise, but faster) -+ return tv.tv_sec * 1000 + tv.tv_usec / 1000; -+} -+ -+ -+/* Timers */ -+ -+struct dwc_timer { -+ struct callout t; -+ char *name; -+ dwc_spinlock_t *lock; -+ dwc_timer_callback_t cb; -+ void *data; -+}; -+ -+dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data) -+{ -+ dwc_timer_t *t = DWC_ALLOC(sizeof(*t)); -+ -+ if (!t) { -+ DWC_ERROR("Cannot allocate memory for timer"); -+ return NULL; -+ } -+ -+ callout_init(&t->t, 1); -+ -+ t->name = DWC_STRDUP(name); -+ if (!t->name) { -+ DWC_ERROR("Cannot allocate memory for timer->name"); -+ goto no_name; -+ } -+ -+ t->lock = DWC_SPINLOCK_ALLOC(); -+ if (!t->lock) { -+ DWC_ERROR("Cannot allocate memory for lock"); -+ goto no_lock; -+ } -+ -+ t->cb = cb; -+ t->data = data; -+ -+ return t; -+ -+ no_lock: -+ DWC_FREE(t->name); -+ no_name: -+ DWC_FREE(t); -+ -+ return NULL; -+} -+ -+void DWC_TIMER_FREE(dwc_timer_t *timer) -+{ -+ callout_stop(&timer->t); -+ DWC_SPINLOCK_FREE(timer->lock); -+ DWC_FREE(timer->name); -+ DWC_FREE(timer); -+} -+ -+void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time) -+{ -+ struct timeval tv; -+ -+ tv.tv_sec = time / 1000; -+ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; -+ callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data); -+} -+ -+void DWC_TIMER_CANCEL(dwc_timer_t *timer) -+{ -+ callout_stop(&timer->t); -+} -+ -+ -+/* Wait Queues */ -+ -+struct dwc_waitq { -+ struct mtx lock; -+ int abort; -+}; -+ -+dwc_waitq_t *DWC_WAITQ_ALLOC(void) -+{ -+ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq)); -+ -+ if (!wq) { -+ DWC_ERROR("Cannot allocate memory for waitqueue"); -+ return NULL; -+ } -+ -+ mtx_init(&wq->lock, "dw3wtq", NULL, MTX_DEF); -+ wq->abort = 0; -+ -+ return wq; -+} -+ -+void DWC_WAITQ_FREE(dwc_waitq_t *wq) -+{ -+ mtx_destroy(&wq->lock); -+ DWC_FREE(wq); -+} -+ -+int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data) -+{ -+// intrmask_t ipl; -+ int result = 0; -+ -+ mtx_lock(&wq->lock); -+// ipl = splbio(); -+ -+ /* Skip the sleep if already aborted or triggered */ -+ if (!wq->abort && !cond(data)) { -+// splx(ipl); -+ result = msleep(wq, &wq->lock, PCATCH, "dw3wat", 0); // infinite timeout -+// ipl = splbio(); -+ } -+ -+ if (result == ERESTART) { // signaled - restart -+ result = -DWC_E_RESTART; -+ -+ } else if (result == EINTR) { // signaled - interrupt -+ result = -DWC_E_ABORT; -+ -+ } else if (wq->abort) { -+ result = -DWC_E_ABORT; -+ -+ } else { -+ result = 0; -+ } -+ -+ wq->abort = 0; -+// splx(ipl); -+ mtx_unlock(&wq->lock); -+ return result; -+} -+ -+int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, -+ void *data, int32_t msecs) -+{ -+ struct timeval tv, tv1, tv2; -+// intrmask_t ipl; -+ int result = 0; -+ -+ tv.tv_sec = msecs / 1000; -+ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; -+ -+ mtx_lock(&wq->lock); -+// ipl = splbio(); -+ -+ /* Skip the sleep if already aborted or triggered */ -+ if (!wq->abort && !cond(data)) { -+// splx(ipl); -+ getmicrouptime(&tv1); -+ result = msleep(wq, &wq->lock, PCATCH, "dw3wto", tvtohz(&tv)); -+ getmicrouptime(&tv2); -+// ipl = splbio(); -+ } -+ -+ if (result == 0) { // awoken -+ if (wq->abort) { -+ result = -DWC_E_ABORT; -+ } else { -+ tv2.tv_usec -= tv1.tv_usec; -+ if (tv2.tv_usec < 0) { -+ tv2.tv_usec += 1000000; -+ tv2.tv_sec--; -+ } -+ -+ tv2.tv_sec -= tv1.tv_sec; -+ result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000; -+ result = msecs - result; -+ if (result <= 0) -+ result = 1; -+ } -+ } else if (result == ERESTART) { // signaled - restart -+ result = -DWC_E_RESTART; -+ -+ } else if (result == EINTR) { // signaled - interrupt -+ result = -DWC_E_ABORT; -+ -+ } else { // timed out -+ result = -DWC_E_TIMEOUT; -+ } -+ -+ wq->abort = 0; -+// splx(ipl); -+ mtx_unlock(&wq->lock); -+ return result; -+} -+ -+void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq) -+{ -+ wakeup(wq); -+} -+ -+void DWC_WAITQ_ABORT(dwc_waitq_t *wq) -+{ -+// intrmask_t ipl; -+ -+ mtx_lock(&wq->lock); -+// ipl = splbio(); -+ wq->abort = 1; -+ wakeup(wq); -+// splx(ipl); -+ mtx_unlock(&wq->lock); -+} -+ -+ -+/* Threading */ -+ -+struct dwc_thread { -+ struct proc *proc; -+ int abort; -+}; -+ -+dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data) -+{ -+ int retval; -+ dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread)); -+ -+ if (!thread) { -+ return NULL; -+ } -+ -+ thread->abort = 0; -+ retval = kthread_create((void (*)(void *))func, data, &thread->proc, -+ RFPROC | RFNOWAIT, 0, "%s", name); -+ if (retval) { -+ DWC_FREE(thread); -+ return NULL; -+ } -+ -+ return thread; -+} -+ -+int DWC_THREAD_STOP(dwc_thread_t *thread) -+{ -+ int retval; -+ -+ thread->abort = 1; -+ retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz); -+ -+ if (retval == 0) { -+ /* DWC_THREAD_EXIT() will free the thread struct */ -+ return 0; -+ } -+ -+ /* NOTE: We leak the thread struct if thread doesn't die */ -+ -+ if (retval == EWOULDBLOCK) { -+ return -DWC_E_TIMEOUT; -+ } -+ -+ return -DWC_E_UNKNOWN; -+} -+ -+dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread) -+{ -+ return thread->abort; -+} -+ -+void DWC_THREAD_EXIT(dwc_thread_t *thread) -+{ -+ wakeup(&thread->abort); -+ DWC_FREE(thread); -+ kthread_exit(0); -+} -+ -+ -+/* tasklets -+ - Runs in interrupt context (cannot sleep) -+ - Each tasklet runs on a single CPU [ How can we ensure this on FreeBSD? Does it matter? ] -+ - Different tasklets can be running simultaneously on different CPUs [ shouldn't matter ] -+ */ -+struct dwc_tasklet { -+ struct task t; -+ dwc_tasklet_callback_t cb; -+ void *data; -+}; -+ -+static void tasklet_callback(void *data, int pending) // what to do with pending ??? -+{ -+ dwc_tasklet_t *task = (dwc_tasklet_t *)data; -+ -+ task->cb(task->data); -+} -+ -+dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data) -+{ -+ dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task)); -+ -+ if (task) { -+ task->cb = cb; -+ task->data = data; -+ TASK_INIT(&task->t, 0, tasklet_callback, task); -+ } else { -+ DWC_ERROR("Cannot allocate memory for tasklet"); -+ } -+ -+ return task; -+} -+ -+void DWC_TASK_FREE(dwc_tasklet_t *task) -+{ -+ taskqueue_drain(taskqueue_fast, &task->t); // ??? -+ DWC_FREE(task); -+} -+ -+void DWC_TASK_SCHEDULE(dwc_tasklet_t *task) -+{ -+ /* Uses predefined system queue */ -+ taskqueue_enqueue_fast(taskqueue_fast, &task->t); -+} -+ -+ -+/* workqueues -+ - Runs in process context (can sleep) -+ */ -+typedef struct work_container { -+ dwc_work_callback_t cb; -+ void *data; -+ dwc_workq_t *wq; -+ char *name; -+ int hz; -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_ENTRY(work_container) entry; -+#endif -+ struct task task; -+} work_container_t; -+ -+#ifdef DEBUG -+DWC_CIRCLEQ_HEAD(work_container_queue, work_container); -+#endif -+ -+struct dwc_workq { -+ struct taskqueue *taskq; -+ dwc_spinlock_t *lock; -+ dwc_waitq_t *waitq; -+ int pending; -+ -+#ifdef DEBUG -+ struct work_container_queue entries; -+#endif -+}; -+ -+static void do_work(void *data, int pending) // what to do with pending ??? -+{ -+ work_container_t *container = (work_container_t *)data; -+ dwc_workq_t *wq = container->wq; -+ dwc_irqflags_t flags; -+ -+ if (container->hz) { -+ pause("dw3wrk", container->hz); -+ } -+ -+ container->cb(container->data); -+ DWC_DEBUG("Work done: %s, container=%p", container->name, container); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry); -+#endif -+ if (container->name) -+ DWC_FREE(container->name); -+ DWC_FREE(container); -+ wq->pending--; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+} -+ -+static int work_done(void *data) -+{ -+ dwc_workq_t *workq = (dwc_workq_t *)data; -+ -+ return workq->pending == 0; -+} -+ -+int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout) -+{ -+ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout); -+} -+ -+dwc_workq_t *DWC_WORKQ_ALLOC(char *name) -+{ -+ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq)); -+ -+ if (!wq) { -+ DWC_ERROR("Cannot allocate memory for workqueue"); -+ return NULL; -+ } -+ -+ wq->taskq = taskqueue_create(name, M_NOWAIT, taskqueue_thread_enqueue, &wq->taskq); -+ if (!wq->taskq) { -+ DWC_ERROR("Cannot allocate memory for taskqueue"); -+ goto no_taskq; -+ } -+ -+ wq->pending = 0; -+ -+ wq->lock = DWC_SPINLOCK_ALLOC(); -+ if (!wq->lock) { -+ DWC_ERROR("Cannot allocate memory for spinlock"); -+ goto no_lock; -+ } -+ -+ wq->waitq = DWC_WAITQ_ALLOC(); -+ if (!wq->waitq) { -+ DWC_ERROR("Cannot allocate memory for waitqueue"); -+ goto no_waitq; -+ } -+ -+ taskqueue_start_threads(&wq->taskq, 1, PWAIT, "%s taskq", "dw3tsk"); -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_INIT(&wq->entries); -+#endif -+ return wq; -+ -+ no_waitq: -+ DWC_SPINLOCK_FREE(wq->lock); -+ no_lock: -+ taskqueue_free(wq->taskq); -+ no_taskq: -+ DWC_FREE(wq); -+ -+ return NULL; -+} -+ -+void DWC_WORKQ_FREE(dwc_workq_t *wq) -+{ -+#ifdef DEBUG -+ dwc_irqflags_t flags; -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ -+ if (wq->pending != 0) { -+ struct work_container *container; -+ -+ DWC_ERROR("Destroying work queue with pending work"); -+ -+ DWC_CIRCLEQ_FOREACH(container, &wq->entries, entry) { -+ DWC_ERROR("Work %s still pending", container->name); -+ } -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+#endif -+ DWC_WAITQ_FREE(wq->waitq); -+ DWC_SPINLOCK_FREE(wq->lock); -+ taskqueue_free(wq->taskq); -+ DWC_FREE(wq); -+} -+ -+void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data, -+ char *format, ...) -+{ -+ dwc_irqflags_t flags; -+ work_container_t *container; -+ static char name[128]; -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VSNPRINTF(name, 128, format, args); -+ va_end(args); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ wq->pending++; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+ -+ container = DWC_ALLOC_ATOMIC(sizeof(*container)); -+ if (!container) { -+ DWC_ERROR("Cannot allocate memory for container"); -+ return; -+ } -+ -+ container->name = DWC_STRDUP(name); -+ if (!container->name) { -+ DWC_ERROR("Cannot allocate memory for container->name"); -+ DWC_FREE(container); -+ return; -+ } -+ -+ container->cb = cb; -+ container->data = data; -+ container->wq = wq; -+ container->hz = 0; -+ -+ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); -+ -+ TASK_INIT(&container->task, 0, do_work, container); -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); -+#endif -+ taskqueue_enqueue_fast(wq->taskq, &container->task); -+} -+ -+void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb, -+ void *data, uint32_t time, char *format, ...) -+{ -+ dwc_irqflags_t flags; -+ work_container_t *container; -+ static char name[128]; -+ struct timeval tv; -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VSNPRINTF(name, 128, format, args); -+ va_end(args); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ wq->pending++; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+ -+ container = DWC_ALLOC_ATOMIC(sizeof(*container)); -+ if (!container) { -+ DWC_ERROR("Cannot allocate memory for container"); -+ return; -+ } -+ -+ container->name = DWC_STRDUP(name); -+ if (!container->name) { -+ DWC_ERROR("Cannot allocate memory for container->name"); -+ DWC_FREE(container); -+ return; -+ } -+ -+ container->cb = cb; -+ container->data = data; -+ container->wq = wq; -+ -+ tv.tv_sec = time / 1000; -+ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; -+ container->hz = tvtohz(&tv); -+ -+ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); -+ -+ TASK_INIT(&container->task, 0, do_work, container); -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); -+#endif -+ taskqueue_enqueue_fast(wq->taskq, &container->task); -+} -+ -+int DWC_WORKQ_PENDING(dwc_workq_t *wq) -+{ -+ return wq->pending; -+} ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_common_linux.c -@@ -0,0 +1,1418 @@ -+#include -+#include -+#include -+#include -+ -+#ifdef DWC_CCLIB -+# include "dwc_cc.h" -+#endif -+ -+#ifdef DWC_CRYPTOLIB -+# include "dwc_modpow.h" -+# include "dwc_dh.h" -+# include "dwc_crypto.h" -+#endif -+ -+#ifdef DWC_NOTIFYLIB -+# include "dwc_notifier.h" -+#endif -+ -+/* OS-Level Implementations */ -+ -+/* This is the Linux kernel implementation of the DWC platform library. */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) -+# include -+#else -+# include -+#endif -+ -+#include -+#include -+#include -+#include -+ -+#include "dwc_os.h" -+#include "dwc_list.h" -+ -+ -+/* MISC */ -+ -+void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size) -+{ -+ return memset(dest, byte, size); -+} -+ -+void *DWC_MEMCPY(void *dest, void const *src, uint32_t size) -+{ -+ return memcpy(dest, src, size); -+} -+ -+void *DWC_MEMMOVE(void *dest, void *src, uint32_t size) -+{ -+ return memmove(dest, src, size); -+} -+ -+int DWC_MEMCMP(void *m1, void *m2, uint32_t size) -+{ -+ return memcmp(m1, m2, size); -+} -+ -+int DWC_STRNCMP(void *s1, void *s2, uint32_t size) -+{ -+ return strncmp(s1, s2, size); -+} -+ -+int DWC_STRCMP(void *s1, void *s2) -+{ -+ return strcmp(s1, s2); -+} -+ -+int DWC_STRLEN(char const *str) -+{ -+ return strlen(str); -+} -+ -+char *DWC_STRCPY(char *to, char const *from) -+{ -+ return strcpy(to, from); -+} -+ -+char *DWC_STRDUP(char const *str) -+{ -+ int len = DWC_STRLEN(str) + 1; -+ char *new = DWC_ALLOC_ATOMIC(len); -+ -+ if (!new) { -+ return NULL; -+ } -+ -+ DWC_MEMCPY(new, str, len); -+ return new; -+} -+ -+int DWC_ATOI(const char *str, int32_t *value) -+{ -+ char *end = NULL; -+ -+ *value = simple_strtol(str, &end, 0); -+ if (*end == '\0') { -+ return 0; -+ } -+ -+ return -1; -+} -+ -+int DWC_ATOUI(const char *str, uint32_t *value) -+{ -+ char *end = NULL; -+ -+ *value = simple_strtoul(str, &end, 0); -+ if (*end == '\0') { -+ return 0; -+ } -+ -+ return -1; -+} -+ -+ -+#ifdef DWC_UTFLIB -+/* From usbstring.c */ -+ -+int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len) -+{ -+ int count = 0; -+ u8 c; -+ u16 uchar; -+ -+ /* this insists on correct encodings, though not minimal ones. -+ * BUT it currently rejects legit 4-byte UTF-8 code points, -+ * which need surrogate pairs. (Unicode 3.1 can use them.) -+ */ -+ while (len != 0 && (c = (u8) *s++) != 0) { -+ if (unlikely(c & 0x80)) { -+ // 2-byte sequence: -+ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx -+ if ((c & 0xe0) == 0xc0) { -+ uchar = (c & 0x1f) << 6; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c; -+ -+ // 3-byte sequence (most CJKV characters): -+ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx -+ } else if ((c & 0xf0) == 0xe0) { -+ uchar = (c & 0x0f) << 12; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c << 6; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c; -+ -+ /* no bogus surrogates */ -+ if (0xd800 <= uchar && uchar <= 0xdfff) -+ goto fail; -+ -+ // 4-byte sequence (surrogate pairs, currently rare): -+ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx -+ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx -+ // (uuuuu = wwww + 1) -+ // FIXME accept the surrogate code points (only) -+ } else -+ goto fail; -+ } else -+ uchar = c; -+ put_unaligned (cpu_to_le16 (uchar), cp++); -+ count++; -+ len--; -+ } -+ return count; -+fail: -+ return -1; -+} -+#endif /* DWC_UTFLIB */ -+ -+ -+/* dwc_debug.h */ -+ -+dwc_bool_t DWC_IN_IRQ(void) -+{ -+ return in_irq(); -+} -+ -+dwc_bool_t DWC_IN_BH(void) -+{ -+ return in_softirq(); -+} -+ -+void DWC_VPRINTF(char *format, va_list args) -+{ -+ vprintk(format, args); -+} -+ -+int DWC_VSNPRINTF(char *str, int size, char *format, va_list args) -+{ -+ return vsnprintf(str, size, format, args); -+} -+ -+void DWC_PRINTF(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+int DWC_SPRINTF(char *buffer, char *format, ...) -+{ -+ int retval; -+ va_list args; -+ -+ va_start(args, format); -+ retval = vsprintf(buffer, format, args); -+ va_end(args); -+ return retval; -+} -+ -+int DWC_SNPRINTF(char *buffer, int size, char *format, ...) -+{ -+ int retval; -+ va_list args; -+ -+ va_start(args, format); -+ retval = vsnprintf(buffer, size, format, args); -+ va_end(args); -+ return retval; -+} -+ -+void __DWC_WARN(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_PRINTF(KERN_WARNING); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+void __DWC_ERROR(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_PRINTF(KERN_ERR); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+void DWC_EXCEPTION(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_PRINTF(KERN_ERR); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+ BUG_ON(1); -+} -+ -+#ifdef DEBUG -+void __DWC_DEBUG(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_PRINTF(KERN_DEBUG); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+#endif -+ -+ -+/* dwc_mem.h */ -+ -+#if 0 -+dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, -+ uint32_t align, -+ uint32_t alloc) -+{ -+ struct dma_pool *pool = dma_pool_create("Pool", NULL, -+ size, align, alloc); -+ return (dwc_pool_t *)pool; -+} -+ -+void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool) -+{ -+ dma_pool_destroy((struct dma_pool *)pool); -+} -+ -+void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr) -+{ -+ return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr); -+} -+ -+void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr) -+{ -+ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr); -+ memset(..); -+} -+ -+void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr) -+{ -+ dma_pool_free(pool, vaddr, daddr); -+} -+#endif -+ -+void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) -+{ -+ return dma_zalloc_coherent(dma_ctx, size, dma_addr, GFP_KERNEL | GFP_DMA32); -+} -+ -+void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) -+{ -+ return dma_zalloc_coherent(dma_ctx, size, dma_addr, GFP_ATOMIC); -+} -+ -+void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr) -+{ -+ dma_free_coherent(dma_ctx, size, virt_addr, dma_addr); -+} -+ -+void *__DWC_ALLOC(void *mem_ctx, uint32_t size) -+{ -+ return kzalloc(size, GFP_KERNEL); -+} -+ -+void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size) -+{ -+ return kzalloc(size, GFP_ATOMIC); -+} -+ -+void __DWC_FREE(void *mem_ctx, void *addr) -+{ -+ kfree(addr); -+} -+ -+ -+#ifdef DWC_CRYPTOLIB -+/* dwc_crypto.h */ -+ -+void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length) -+{ -+ get_random_bytes(buffer, length); -+} -+ -+int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out) -+{ -+ struct crypto_blkcipher *tfm; -+ struct blkcipher_desc desc; -+ struct scatterlist sgd; -+ struct scatterlist sgs; -+ -+ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); -+ if (tfm == NULL) { -+ printk("failed to load transform for aes CBC\n"); -+ return -1; -+ } -+ -+ crypto_blkcipher_setkey(tfm, key, keylen); -+ crypto_blkcipher_set_iv(tfm, iv, 16); -+ -+ sg_init_one(&sgd, out, messagelen); -+ sg_init_one(&sgs, message, messagelen); -+ -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) { -+ crypto_free_blkcipher(tfm); -+ DWC_ERROR("AES CBC encryption failed"); -+ return -1; -+ } -+ -+ crypto_free_blkcipher(tfm); -+ return 0; -+} -+ -+int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out) -+{ -+ struct crypto_hash *tfm; -+ struct hash_desc desc; -+ struct scatterlist sg; -+ -+ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC); -+ if (IS_ERR(tfm)) { -+ DWC_ERROR("Failed to load transform for sha256: %ld\n", PTR_ERR(tfm)); -+ return 0; -+ } -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ sg_init_one(&sg, message, len); -+ crypto_hash_digest(&desc, &sg, len, out); -+ crypto_free_hash(tfm); -+ -+ return 1; -+} -+ -+int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, -+ uint8_t *key, uint32_t keylen, uint8_t *out) -+{ -+ struct crypto_hash *tfm; -+ struct hash_desc desc; -+ struct scatterlist sg; -+ -+ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC); -+ if (IS_ERR(tfm)) { -+ DWC_ERROR("Failed to load transform for hmac(sha256): %ld\n", PTR_ERR(tfm)); -+ return 0; -+ } -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ sg_init_one(&sg, message, messagelen); -+ crypto_hash_setkey(tfm, key, keylen); -+ crypto_hash_digest(&desc, &sg, messagelen, out); -+ crypto_free_hash(tfm); -+ -+ return 1; -+} -+#endif /* DWC_CRYPTOLIB */ -+ -+ -+/* Byte Ordering Conversions */ -+ -+uint32_t DWC_CPU_TO_LE32(uint32_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_CPU_TO_BE32(uint32_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_LE32_TO_CPU(uint32_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_BE32_TO_CPU(uint32_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint16_t DWC_CPU_TO_LE16(uint16_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_CPU_TO_BE16(uint16_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_LE16_TO_CPU(uint16_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_BE16_TO_CPU(uint16_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+ -+/* Registers */ -+ -+uint32_t DWC_READ_REG32(uint32_t volatile *reg) -+{ -+ return readl(reg); -+} -+ -+#if 0 -+uint64_t DWC_READ_REG64(uint64_t volatile *reg) -+{ -+} -+#endif -+ -+void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value) -+{ -+ writel(value, reg); -+} -+ -+#if 0 -+void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value) -+{ -+} -+#endif -+ -+void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask) -+{ -+ writel((readl(reg) & ~clear_mask) | set_mask, reg); -+} -+ -+#if 0 -+void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask) -+{ -+} -+#endif -+ -+ -+/* Locking */ -+ -+dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void) -+{ -+ spinlock_t *sl = (spinlock_t *)1; -+ -+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) -+ sl = DWC_ALLOC(sizeof(*sl)); -+ if (!sl) { -+ DWC_ERROR("Cannot allocate memory for spinlock\n"); -+ return NULL; -+ } -+ -+ spin_lock_init(sl); -+#endif -+ return (dwc_spinlock_t *)sl; -+} -+ -+void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock) -+{ -+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) -+ DWC_FREE(lock); -+#endif -+} -+ -+void DWC_SPINLOCK(dwc_spinlock_t *lock) -+{ -+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) -+ spin_lock((spinlock_t *)lock); -+#endif -+} -+ -+void DWC_SPINUNLOCK(dwc_spinlock_t *lock) -+{ -+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) -+ spin_unlock((spinlock_t *)lock); -+#endif -+} -+ -+void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags) -+{ -+ dwc_irqflags_t f; -+ -+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) -+ spin_lock_irqsave((spinlock_t *)lock, f); -+#else -+ local_irq_save(f); -+#endif -+ *flags = f; -+} -+ -+void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags) -+{ -+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) -+ spin_unlock_irqrestore((spinlock_t *)lock, flags); -+#else -+ local_irq_restore(flags); -+#endif -+} -+ -+dwc_mutex_t *DWC_MUTEX_ALLOC(void) -+{ -+ struct mutex *m; -+ dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex)); -+ -+ if (!mutex) { -+ DWC_ERROR("Cannot allocate memory for mutex\n"); -+ return NULL; -+ } -+ -+ m = (struct mutex *)mutex; -+ mutex_init(m); -+ return mutex; -+} -+ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) -+#else -+void DWC_MUTEX_FREE(dwc_mutex_t *mutex) -+{ -+ mutex_destroy((struct mutex *)mutex); -+ DWC_FREE(mutex); -+} -+#endif -+ -+void DWC_MUTEX_LOCK(dwc_mutex_t *mutex) -+{ -+ struct mutex *m = (struct mutex *)mutex; -+ mutex_lock(m); -+} -+ -+int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex) -+{ -+ struct mutex *m = (struct mutex *)mutex; -+ return mutex_trylock(m); -+} -+ -+void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex) -+{ -+ struct mutex *m = (struct mutex *)mutex; -+ mutex_unlock(m); -+} -+ -+ -+/* Timing */ -+ -+void DWC_UDELAY(uint32_t usecs) -+{ -+ udelay(usecs); -+} -+ -+void DWC_MDELAY(uint32_t msecs) -+{ -+ mdelay(msecs); -+} -+ -+void DWC_MSLEEP(uint32_t msecs) -+{ -+ msleep(msecs); -+} -+ -+uint32_t DWC_TIME(void) -+{ -+ return jiffies_to_msecs(jiffies); -+} -+ -+ -+/* Timers */ -+ -+struct dwc_timer { -+ struct timer_list *t; -+ char *name; -+ dwc_timer_callback_t cb; -+ void *data; -+ uint8_t scheduled; -+ dwc_spinlock_t *lock; -+}; -+ -+static void timer_callback(unsigned long data) -+{ -+ dwc_timer_t *timer = (dwc_timer_t *)data; -+ dwc_irqflags_t flags; -+ -+ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags); -+ timer->scheduled = 0; -+ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags); -+ DWC_DEBUGC("Timer %s callback", timer->name); -+ timer->cb(timer->data); -+} -+ -+dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data) -+{ -+ dwc_timer_t *t = DWC_ALLOC(sizeof(*t)); -+ -+ if (!t) { -+ DWC_ERROR("Cannot allocate memory for timer"); -+ return NULL; -+ } -+ -+ t->t = DWC_ALLOC(sizeof(*t->t)); -+ if (!t->t) { -+ DWC_ERROR("Cannot allocate memory for timer->t"); -+ goto no_timer; -+ } -+ -+ t->name = DWC_STRDUP(name); -+ if (!t->name) { -+ DWC_ERROR("Cannot allocate memory for timer->name"); -+ goto no_name; -+ } -+ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK)) -+ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(t->lock); -+#else -+ t->lock = DWC_SPINLOCK_ALLOC(); -+#endif -+ if (!t->lock) { -+ DWC_ERROR("Cannot allocate memory for lock"); -+ goto no_lock; -+ } -+ -+ t->scheduled = 0; -+ t->t->expires = jiffies; -+ setup_timer(t->t, timer_callback, (unsigned long)t); -+ -+ t->cb = cb; -+ t->data = data; -+ -+ return t; -+ -+ no_lock: -+ DWC_FREE(t->name); -+ no_name: -+ DWC_FREE(t->t); -+ no_timer: -+ DWC_FREE(t); -+ return NULL; -+} -+ -+void DWC_TIMER_FREE(dwc_timer_t *timer) -+{ -+ dwc_irqflags_t flags; -+ -+ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags); -+ -+ if (timer->scheduled) { -+ del_timer(timer->t); -+ timer->scheduled = 0; -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags); -+ DWC_SPINLOCK_FREE(timer->lock); -+ DWC_FREE(timer->t); -+ DWC_FREE(timer->name); -+ DWC_FREE(timer); -+} -+ -+void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time) -+{ -+ dwc_irqflags_t flags; -+ -+ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags); -+ -+ if (!timer->scheduled) { -+ timer->scheduled = 1; -+ DWC_DEBUGC("Scheduling timer %s to expire in +%d msec", timer->name, time); -+ timer->t->expires = jiffies + msecs_to_jiffies(time); -+ add_timer(timer->t); -+ } else { -+ DWC_DEBUGC("Modifying timer %s to expire in +%d msec", timer->name, time); -+ mod_timer(timer->t, jiffies + msecs_to_jiffies(time)); -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags); -+} -+ -+void DWC_TIMER_CANCEL(dwc_timer_t *timer) -+{ -+ del_timer(timer->t); -+} -+ -+ -+/* Wait Queues */ -+ -+struct dwc_waitq { -+ wait_queue_head_t queue; -+ int abort; -+}; -+ -+dwc_waitq_t *DWC_WAITQ_ALLOC(void) -+{ -+ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq)); -+ -+ if (!wq) { -+ DWC_ERROR("Cannot allocate memory for waitqueue\n"); -+ return NULL; -+ } -+ -+ init_waitqueue_head(&wq->queue); -+ wq->abort = 0; -+ return wq; -+} -+ -+void DWC_WAITQ_FREE(dwc_waitq_t *wq) -+{ -+ DWC_FREE(wq); -+} -+ -+int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data) -+{ -+ int result = wait_event_interruptible(wq->queue, -+ cond(data) || wq->abort); -+ if (result == -ERESTARTSYS) { -+ wq->abort = 0; -+ return -DWC_E_RESTART; -+ } -+ -+ if (wq->abort == 1) { -+ wq->abort = 0; -+ return -DWC_E_ABORT; -+ } -+ -+ wq->abort = 0; -+ -+ if (result == 0) { -+ return 0; -+ } -+ -+ return -DWC_E_UNKNOWN; -+} -+ -+int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, -+ void *data, int32_t msecs) -+{ -+ int32_t tmsecs; -+ int result = wait_event_interruptible_timeout(wq->queue, -+ cond(data) || wq->abort, -+ msecs_to_jiffies(msecs)); -+ if (result == -ERESTARTSYS) { -+ wq->abort = 0; -+ return -DWC_E_RESTART; -+ } -+ -+ if (wq->abort == 1) { -+ wq->abort = 0; -+ return -DWC_E_ABORT; -+ } -+ -+ wq->abort = 0; -+ -+ if (result > 0) { -+ tmsecs = jiffies_to_msecs(result); -+ if (!tmsecs) { -+ return 1; -+ } -+ -+ return tmsecs; -+ } -+ -+ if (result == 0) { -+ return -DWC_E_TIMEOUT; -+ } -+ -+ return -DWC_E_UNKNOWN; -+} -+ -+void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq) -+{ -+ wq->abort = 0; -+ wake_up_interruptible(&wq->queue); -+} -+ -+void DWC_WAITQ_ABORT(dwc_waitq_t *wq) -+{ -+ wq->abort = 1; -+ wake_up_interruptible(&wq->queue); -+} -+ -+ -+/* Threading */ -+ -+dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data) -+{ -+ struct task_struct *thread = kthread_run(func, data, name); -+ -+ if (thread == ERR_PTR(-ENOMEM)) { -+ return NULL; -+ } -+ -+ return (dwc_thread_t *)thread; -+} -+ -+int DWC_THREAD_STOP(dwc_thread_t *thread) -+{ -+ return kthread_stop((struct task_struct *)thread); -+} -+ -+dwc_bool_t DWC_THREAD_SHOULD_STOP(void) -+{ -+ return kthread_should_stop(); -+} -+ -+ -+/* tasklets -+ - run in interrupt context (cannot sleep) -+ - each tasklet runs on a single CPU -+ - different tasklets can be running simultaneously on different CPUs -+ */ -+struct dwc_tasklet { -+ struct tasklet_struct t; -+ dwc_tasklet_callback_t cb; -+ void *data; -+}; -+ -+static void tasklet_callback(unsigned long data) -+{ -+ dwc_tasklet_t *t = (dwc_tasklet_t *)data; -+ t->cb(t->data); -+} -+ -+dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data) -+{ -+ dwc_tasklet_t *t = DWC_ALLOC(sizeof(*t)); -+ -+ if (t) { -+ t->cb = cb; -+ t->data = data; -+ tasklet_init(&t->t, tasklet_callback, (unsigned long)t); -+ } else { -+ DWC_ERROR("Cannot allocate memory for tasklet\n"); -+ } -+ -+ return t; -+} -+ -+void DWC_TASK_FREE(dwc_tasklet_t *task) -+{ -+ DWC_FREE(task); -+} -+ -+void DWC_TASK_SCHEDULE(dwc_tasklet_t *task) -+{ -+ tasklet_schedule(&task->t); -+} -+ -+void DWC_TASK_HI_SCHEDULE(dwc_tasklet_t *task) -+{ -+ tasklet_hi_schedule(&task->t); -+} -+ -+ -+/* workqueues -+ - run in process context (can sleep) -+ */ -+typedef struct work_container { -+ dwc_work_callback_t cb; -+ void *data; -+ dwc_workq_t *wq; -+ char *name; -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_ENTRY(work_container) entry; -+#endif -+ struct delayed_work work; -+} work_container_t; -+ -+#ifdef DEBUG -+DWC_CIRCLEQ_HEAD(work_container_queue, work_container); -+#endif -+ -+struct dwc_workq { -+ struct workqueue_struct *wq; -+ dwc_spinlock_t *lock; -+ dwc_waitq_t *waitq; -+ int pending; -+ -+#ifdef DEBUG -+ struct work_container_queue entries; -+#endif -+}; -+ -+static void do_work(struct work_struct *work) -+{ -+ dwc_irqflags_t flags; -+ struct delayed_work *dw = container_of(work, struct delayed_work, work); -+ work_container_t *container = container_of(dw, struct work_container, work); -+ dwc_workq_t *wq = container->wq; -+ -+ container->cb(container->data); -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry); -+#endif -+ DWC_DEBUGC("Work done: %s, container=%p", container->name, container); -+ if (container->name) { -+ DWC_FREE(container->name); -+ } -+ DWC_FREE(container); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ wq->pending--; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+} -+ -+static int work_done(void *data) -+{ -+ dwc_workq_t *workq = (dwc_workq_t *)data; -+ return workq->pending == 0; -+} -+ -+int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout) -+{ -+ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout); -+} -+ -+dwc_workq_t *DWC_WORKQ_ALLOC(char *name) -+{ -+ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq)); -+ -+ if (!wq) { -+ return NULL; -+ } -+ -+ wq->wq = create_singlethread_workqueue(name); -+ if (!wq->wq) { -+ goto no_wq; -+ } -+ -+ wq->pending = 0; -+ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK)) -+ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(wq->lock); -+#else -+ wq->lock = DWC_SPINLOCK_ALLOC(); -+#endif -+ if (!wq->lock) { -+ goto no_lock; -+ } -+ -+ wq->waitq = DWC_WAITQ_ALLOC(); -+ if (!wq->waitq) { -+ goto no_waitq; -+ } -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_INIT(&wq->entries); -+#endif -+ return wq; -+ -+ no_waitq: -+ DWC_SPINLOCK_FREE(wq->lock); -+ no_lock: -+ destroy_workqueue(wq->wq); -+ no_wq: -+ DWC_FREE(wq); -+ -+ return NULL; -+} -+ -+void DWC_WORKQ_FREE(dwc_workq_t *wq) -+{ -+#ifdef DEBUG -+ if (wq->pending != 0) { -+ struct work_container *wc; -+ DWC_ERROR("Destroying work queue with pending work"); -+ DWC_CIRCLEQ_FOREACH(wc, &wq->entries, entry) { -+ DWC_ERROR("Work %s still pending", wc->name); -+ } -+ } -+#endif -+ destroy_workqueue(wq->wq); -+ DWC_SPINLOCK_FREE(wq->lock); -+ DWC_WAITQ_FREE(wq->waitq); -+ DWC_FREE(wq); -+} -+ -+void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data, -+ char *format, ...) -+{ -+ dwc_irqflags_t flags; -+ work_container_t *container; -+ static char name[128]; -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VSNPRINTF(name, 128, format, args); -+ va_end(args); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ wq->pending++; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+ -+ container = DWC_ALLOC_ATOMIC(sizeof(*container)); -+ if (!container) { -+ DWC_ERROR("Cannot allocate memory for container\n"); -+ return; -+ } -+ -+ container->name = DWC_STRDUP(name); -+ if (!container->name) { -+ DWC_ERROR("Cannot allocate memory for container->name\n"); -+ DWC_FREE(container); -+ return; -+ } -+ -+ container->cb = cb; -+ container->data = data; -+ container->wq = wq; -+ DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container); -+ INIT_WORK(&container->work.work, do_work); -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); -+#endif -+ queue_work(wq->wq, &container->work.work); -+} -+ -+void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb, -+ void *data, uint32_t time, char *format, ...) -+{ -+ dwc_irqflags_t flags; -+ work_container_t *container; -+ static char name[128]; -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VSNPRINTF(name, 128, format, args); -+ va_end(args); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ wq->pending++; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+ -+ container = DWC_ALLOC_ATOMIC(sizeof(*container)); -+ if (!container) { -+ DWC_ERROR("Cannot allocate memory for container\n"); -+ return; -+ } -+ -+ container->name = DWC_STRDUP(name); -+ if (!container->name) { -+ DWC_ERROR("Cannot allocate memory for container->name\n"); -+ DWC_FREE(container); -+ return; -+ } -+ -+ container->cb = cb; -+ container->data = data; -+ container->wq = wq; -+ DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container); -+ INIT_DELAYED_WORK(&container->work, do_work); -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); -+#endif -+ queue_delayed_work(wq->wq, &container->work, msecs_to_jiffies(time)); -+} -+ -+int DWC_WORKQ_PENDING(dwc_workq_t *wq) -+{ -+ return wq->pending; -+} -+ -+ -+#ifdef DWC_LIBMODULE -+ -+#ifdef DWC_CCLIB -+/* CC */ -+EXPORT_SYMBOL(dwc_cc_if_alloc); -+EXPORT_SYMBOL(dwc_cc_if_free); -+EXPORT_SYMBOL(dwc_cc_clear); -+EXPORT_SYMBOL(dwc_cc_add); -+EXPORT_SYMBOL(dwc_cc_remove); -+EXPORT_SYMBOL(dwc_cc_change); -+EXPORT_SYMBOL(dwc_cc_data_for_save); -+EXPORT_SYMBOL(dwc_cc_restore_from_data); -+EXPORT_SYMBOL(dwc_cc_match_chid); -+EXPORT_SYMBOL(dwc_cc_match_cdid); -+EXPORT_SYMBOL(dwc_cc_ck); -+EXPORT_SYMBOL(dwc_cc_chid); -+EXPORT_SYMBOL(dwc_cc_cdid); -+EXPORT_SYMBOL(dwc_cc_name); -+#endif /* DWC_CCLIB */ -+ -+#ifdef DWC_CRYPTOLIB -+# ifndef CONFIG_MACH_IPMATE -+/* Modpow */ -+EXPORT_SYMBOL(dwc_modpow); -+ -+/* DH */ -+EXPORT_SYMBOL(dwc_dh_modpow); -+EXPORT_SYMBOL(dwc_dh_derive_keys); -+EXPORT_SYMBOL(dwc_dh_pk); -+# endif /* CONFIG_MACH_IPMATE */ -+ -+/* Crypto */ -+EXPORT_SYMBOL(dwc_wusb_aes_encrypt); -+EXPORT_SYMBOL(dwc_wusb_cmf); -+EXPORT_SYMBOL(dwc_wusb_prf); -+EXPORT_SYMBOL(dwc_wusb_fill_ccm_nonce); -+EXPORT_SYMBOL(dwc_wusb_gen_nonce); -+EXPORT_SYMBOL(dwc_wusb_gen_key); -+EXPORT_SYMBOL(dwc_wusb_gen_mic); -+#endif /* DWC_CRYPTOLIB */ -+ -+/* Notification */ -+#ifdef DWC_NOTIFYLIB -+EXPORT_SYMBOL(dwc_alloc_notification_manager); -+EXPORT_SYMBOL(dwc_free_notification_manager); -+EXPORT_SYMBOL(dwc_register_notifier); -+EXPORT_SYMBOL(dwc_unregister_notifier); -+EXPORT_SYMBOL(dwc_add_observer); -+EXPORT_SYMBOL(dwc_remove_observer); -+EXPORT_SYMBOL(dwc_notify); -+#endif -+ -+/* Memory Debugging Routines */ -+#ifdef DWC_DEBUG_MEMORY -+EXPORT_SYMBOL(dwc_alloc_debug); -+EXPORT_SYMBOL(dwc_alloc_atomic_debug); -+EXPORT_SYMBOL(dwc_free_debug); -+EXPORT_SYMBOL(dwc_dma_alloc_debug); -+EXPORT_SYMBOL(dwc_dma_free_debug); -+#endif -+ -+EXPORT_SYMBOL(DWC_MEMSET); -+EXPORT_SYMBOL(DWC_MEMCPY); -+EXPORT_SYMBOL(DWC_MEMMOVE); -+EXPORT_SYMBOL(DWC_MEMCMP); -+EXPORT_SYMBOL(DWC_STRNCMP); -+EXPORT_SYMBOL(DWC_STRCMP); -+EXPORT_SYMBOL(DWC_STRLEN); -+EXPORT_SYMBOL(DWC_STRCPY); -+EXPORT_SYMBOL(DWC_STRDUP); -+EXPORT_SYMBOL(DWC_ATOI); -+EXPORT_SYMBOL(DWC_ATOUI); -+ -+#ifdef DWC_UTFLIB -+EXPORT_SYMBOL(DWC_UTF8_TO_UTF16LE); -+#endif /* DWC_UTFLIB */ -+ -+EXPORT_SYMBOL(DWC_IN_IRQ); -+EXPORT_SYMBOL(DWC_IN_BH); -+EXPORT_SYMBOL(DWC_VPRINTF); -+EXPORT_SYMBOL(DWC_VSNPRINTF); -+EXPORT_SYMBOL(DWC_PRINTF); -+EXPORT_SYMBOL(DWC_SPRINTF); -+EXPORT_SYMBOL(DWC_SNPRINTF); -+EXPORT_SYMBOL(__DWC_WARN); -+EXPORT_SYMBOL(__DWC_ERROR); -+EXPORT_SYMBOL(DWC_EXCEPTION); -+ -+#ifdef DEBUG -+EXPORT_SYMBOL(__DWC_DEBUG); -+#endif -+ -+EXPORT_SYMBOL(__DWC_DMA_ALLOC); -+EXPORT_SYMBOL(__DWC_DMA_ALLOC_ATOMIC); -+EXPORT_SYMBOL(__DWC_DMA_FREE); -+EXPORT_SYMBOL(__DWC_ALLOC); -+EXPORT_SYMBOL(__DWC_ALLOC_ATOMIC); -+EXPORT_SYMBOL(__DWC_FREE); -+ -+#ifdef DWC_CRYPTOLIB -+EXPORT_SYMBOL(DWC_RANDOM_BYTES); -+EXPORT_SYMBOL(DWC_AES_CBC); -+EXPORT_SYMBOL(DWC_SHA256); -+EXPORT_SYMBOL(DWC_HMAC_SHA256); -+#endif -+ -+EXPORT_SYMBOL(DWC_CPU_TO_LE32); -+EXPORT_SYMBOL(DWC_CPU_TO_BE32); -+EXPORT_SYMBOL(DWC_LE32_TO_CPU); -+EXPORT_SYMBOL(DWC_BE32_TO_CPU); -+EXPORT_SYMBOL(DWC_CPU_TO_LE16); -+EXPORT_SYMBOL(DWC_CPU_TO_BE16); -+EXPORT_SYMBOL(DWC_LE16_TO_CPU); -+EXPORT_SYMBOL(DWC_BE16_TO_CPU); -+EXPORT_SYMBOL(DWC_READ_REG32); -+EXPORT_SYMBOL(DWC_WRITE_REG32); -+EXPORT_SYMBOL(DWC_MODIFY_REG32); -+ -+#if 0 -+EXPORT_SYMBOL(DWC_READ_REG64); -+EXPORT_SYMBOL(DWC_WRITE_REG64); -+EXPORT_SYMBOL(DWC_MODIFY_REG64); -+#endif -+ -+EXPORT_SYMBOL(DWC_SPINLOCK_ALLOC); -+EXPORT_SYMBOL(DWC_SPINLOCK_FREE); -+EXPORT_SYMBOL(DWC_SPINLOCK); -+EXPORT_SYMBOL(DWC_SPINUNLOCK); -+EXPORT_SYMBOL(DWC_SPINLOCK_IRQSAVE); -+EXPORT_SYMBOL(DWC_SPINUNLOCK_IRQRESTORE); -+EXPORT_SYMBOL(DWC_MUTEX_ALLOC); -+ -+#if (!defined(DWC_LINUX) || !defined(CONFIG_DEBUG_MUTEXES)) -+EXPORT_SYMBOL(DWC_MUTEX_FREE); -+#endif -+ -+EXPORT_SYMBOL(DWC_MUTEX_LOCK); -+EXPORT_SYMBOL(DWC_MUTEX_TRYLOCK); -+EXPORT_SYMBOL(DWC_MUTEX_UNLOCK); -+EXPORT_SYMBOL(DWC_UDELAY); -+EXPORT_SYMBOL(DWC_MDELAY); -+EXPORT_SYMBOL(DWC_MSLEEP); -+EXPORT_SYMBOL(DWC_TIME); -+EXPORT_SYMBOL(DWC_TIMER_ALLOC); -+EXPORT_SYMBOL(DWC_TIMER_FREE); -+EXPORT_SYMBOL(DWC_TIMER_SCHEDULE); -+EXPORT_SYMBOL(DWC_TIMER_CANCEL); -+EXPORT_SYMBOL(DWC_WAITQ_ALLOC); -+EXPORT_SYMBOL(DWC_WAITQ_FREE); -+EXPORT_SYMBOL(DWC_WAITQ_WAIT); -+EXPORT_SYMBOL(DWC_WAITQ_WAIT_TIMEOUT); -+EXPORT_SYMBOL(DWC_WAITQ_TRIGGER); -+EXPORT_SYMBOL(DWC_WAITQ_ABORT); -+EXPORT_SYMBOL(DWC_THREAD_RUN); -+EXPORT_SYMBOL(DWC_THREAD_STOP); -+EXPORT_SYMBOL(DWC_THREAD_SHOULD_STOP); -+EXPORT_SYMBOL(DWC_TASK_ALLOC); -+EXPORT_SYMBOL(DWC_TASK_FREE); -+EXPORT_SYMBOL(DWC_TASK_SCHEDULE); -+EXPORT_SYMBOL(DWC_WORKQ_WAIT_WORK_DONE); -+EXPORT_SYMBOL(DWC_WORKQ_ALLOC); -+EXPORT_SYMBOL(DWC_WORKQ_FREE); -+EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE); -+EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE_DELAYED); -+EXPORT_SYMBOL(DWC_WORKQ_PENDING); -+ -+static int dwc_common_port_init_module(void) -+{ -+ int result = 0; -+ -+ printk(KERN_DEBUG "Module dwc_common_port init\n" ); -+ -+#ifdef DWC_DEBUG_MEMORY -+ result = dwc_memory_debug_start(NULL); -+ if (result) { -+ printk(KERN_ERR -+ "dwc_memory_debug_start() failed with error %d\n", -+ result); -+ return result; -+ } -+#endif -+ -+#ifdef DWC_NOTIFYLIB -+ result = dwc_alloc_notification_manager(NULL, NULL); -+ if (result) { -+ printk(KERN_ERR -+ "dwc_alloc_notification_manager() failed with error %d\n", -+ result); -+ return result; -+ } -+#endif -+ return result; -+} -+ -+static void dwc_common_port_exit_module(void) -+{ -+ printk(KERN_DEBUG "Module dwc_common_port exit\n" ); -+ -+#ifdef DWC_NOTIFYLIB -+ dwc_free_notification_manager(); -+#endif -+ -+#ifdef DWC_DEBUG_MEMORY -+ dwc_memory_debug_stop(); -+#endif -+} -+ -+module_init(dwc_common_port_init_module); -+module_exit(dwc_common_port_exit_module); -+ -+MODULE_DESCRIPTION("DWC Common Library - Portable version"); -+MODULE_AUTHOR("Synopsys Inc."); -+MODULE_LICENSE ("GPL"); -+ -+#endif /* DWC_LIBMODULE */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c -@@ -0,0 +1,1275 @@ -+#include "dwc_os.h" -+#include "dwc_list.h" -+ -+#ifdef DWC_CCLIB -+# include "dwc_cc.h" -+#endif -+ -+#ifdef DWC_CRYPTOLIB -+# include "dwc_modpow.h" -+# include "dwc_dh.h" -+# include "dwc_crypto.h" -+#endif -+ -+#ifdef DWC_NOTIFYLIB -+# include "dwc_notifier.h" -+#endif -+ -+/* OS-Level Implementations */ -+ -+/* This is the NetBSD 4.0.1 kernel implementation of the DWC platform library. */ -+ -+ -+/* MISC */ -+ -+void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size) -+{ -+ return memset(dest, byte, size); -+} -+ -+void *DWC_MEMCPY(void *dest, void const *src, uint32_t size) -+{ -+ return memcpy(dest, src, size); -+} -+ -+void *DWC_MEMMOVE(void *dest, void *src, uint32_t size) -+{ -+ bcopy(src, dest, size); -+ return dest; -+} -+ -+int DWC_MEMCMP(void *m1, void *m2, uint32_t size) -+{ -+ return memcmp(m1, m2, size); -+} -+ -+int DWC_STRNCMP(void *s1, void *s2, uint32_t size) -+{ -+ return strncmp(s1, s2, size); -+} -+ -+int DWC_STRCMP(void *s1, void *s2) -+{ -+ return strcmp(s1, s2); -+} -+ -+int DWC_STRLEN(char const *str) -+{ -+ return strlen(str); -+} -+ -+char *DWC_STRCPY(char *to, char const *from) -+{ -+ return strcpy(to, from); -+} -+ -+char *DWC_STRDUP(char const *str) -+{ -+ int len = DWC_STRLEN(str) + 1; -+ char *new = DWC_ALLOC_ATOMIC(len); -+ -+ if (!new) { -+ return NULL; -+ } -+ -+ DWC_MEMCPY(new, str, len); -+ return new; -+} -+ -+int DWC_ATOI(char *str, int32_t *value) -+{ -+ char *end = NULL; -+ -+ /* NetBSD doesn't have 'strtol' in the kernel, but 'strtoul' -+ * should be equivalent on 2's complement machines -+ */ -+ *value = strtoul(str, &end, 0); -+ if (*end == '\0') { -+ return 0; -+ } -+ -+ return -1; -+} -+ -+int DWC_ATOUI(char *str, uint32_t *value) -+{ -+ char *end = NULL; -+ -+ *value = strtoul(str, &end, 0); -+ if (*end == '\0') { -+ return 0; -+ } -+ -+ return -1; -+} -+ -+ -+#ifdef DWC_UTFLIB -+/* From usbstring.c */ -+ -+int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len) -+{ -+ int count = 0; -+ u8 c; -+ u16 uchar; -+ -+ /* this insists on correct encodings, though not minimal ones. -+ * BUT it currently rejects legit 4-byte UTF-8 code points, -+ * which need surrogate pairs. (Unicode 3.1 can use them.) -+ */ -+ while (len != 0 && (c = (u8) *s++) != 0) { -+ if (unlikely(c & 0x80)) { -+ // 2-byte sequence: -+ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx -+ if ((c & 0xe0) == 0xc0) { -+ uchar = (c & 0x1f) << 6; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c; -+ -+ // 3-byte sequence (most CJKV characters): -+ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx -+ } else if ((c & 0xf0) == 0xe0) { -+ uchar = (c & 0x0f) << 12; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c << 6; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c; -+ -+ /* no bogus surrogates */ -+ if (0xd800 <= uchar && uchar <= 0xdfff) -+ goto fail; -+ -+ // 4-byte sequence (surrogate pairs, currently rare): -+ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx -+ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx -+ // (uuuuu = wwww + 1) -+ // FIXME accept the surrogate code points (only) -+ } else -+ goto fail; -+ } else -+ uchar = c; -+ put_unaligned (cpu_to_le16 (uchar), cp++); -+ count++; -+ len--; -+ } -+ return count; -+fail: -+ return -1; -+} -+ -+#endif /* DWC_UTFLIB */ -+ -+ -+/* dwc_debug.h */ -+ -+dwc_bool_t DWC_IN_IRQ(void) -+{ -+// return in_irq(); -+ return 0; -+} -+ -+dwc_bool_t DWC_IN_BH(void) -+{ -+// return in_softirq(); -+ return 0; -+} -+ -+void DWC_VPRINTF(char *format, va_list args) -+{ -+ vprintf(format, args); -+} -+ -+int DWC_VSNPRINTF(char *str, int size, char *format, va_list args) -+{ -+ return vsnprintf(str, size, format, args); -+} -+ -+void DWC_PRINTF(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+int DWC_SPRINTF(char *buffer, char *format, ...) -+{ -+ int retval; -+ va_list args; -+ -+ va_start(args, format); -+ retval = vsprintf(buffer, format, args); -+ va_end(args); -+ return retval; -+} -+ -+int DWC_SNPRINTF(char *buffer, int size, char *format, ...) -+{ -+ int retval; -+ va_list args; -+ -+ va_start(args, format); -+ retval = vsnprintf(buffer, size, format, args); -+ va_end(args); -+ return retval; -+} -+ -+void __DWC_WARN(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+void __DWC_ERROR(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+void DWC_EXCEPTION(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+// BUG_ON(1); ??? -+} -+ -+#ifdef DEBUG -+void __DWC_DEBUG(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+#endif -+ -+ -+/* dwc_mem.h */ -+ -+#if 0 -+dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, -+ uint32_t align, -+ uint32_t alloc) -+{ -+ struct dma_pool *pool = dma_pool_create("Pool", NULL, -+ size, align, alloc); -+ return (dwc_pool_t *)pool; -+} -+ -+void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool) -+{ -+ dma_pool_destroy((struct dma_pool *)pool); -+} -+ -+void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr) -+{ -+// return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr); -+ return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr); -+} -+ -+void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr) -+{ -+ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr); -+ memset(..); -+} -+ -+void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr) -+{ -+ dma_pool_free(pool, vaddr, daddr); -+} -+#endif -+ -+void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) -+{ -+ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; -+ int error; -+ -+ error = bus_dmamem_alloc(dma->dma_tag, size, 1, size, dma->segs, -+ sizeof(dma->segs) / sizeof(dma->segs[0]), -+ &dma->nsegs, BUS_DMA_NOWAIT); -+ if (error) { -+ printf("%s: bus_dmamem_alloc(%ju) failed: %d\n", __func__, -+ (uintmax_t)size, error); -+ goto fail_0; -+ } -+ -+ error = bus_dmamem_map(dma->dma_tag, dma->segs, dma->nsegs, size, -+ (caddr_t *)&dma->dma_vaddr, -+ BUS_DMA_NOWAIT | BUS_DMA_COHERENT); -+ if (error) { -+ printf("%s: bus_dmamem_map failed: %d\n", __func__, error); -+ goto fail_1; -+ } -+ -+ error = bus_dmamap_create(dma->dma_tag, size, 1, size, 0, -+ BUS_DMA_NOWAIT, &dma->dma_map); -+ if (error) { -+ printf("%s: bus_dmamap_create failed: %d\n", __func__, error); -+ goto fail_2; -+ } -+ -+ error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr, -+ size, NULL, BUS_DMA_NOWAIT); -+ if (error) { -+ printf("%s: bus_dmamap_load failed: %d\n", __func__, error); -+ goto fail_3; -+ } -+ -+ dma->dma_paddr = (bus_addr_t)dma->segs[0].ds_addr; -+ *dma_addr = dma->dma_paddr; -+ return dma->dma_vaddr; -+ -+fail_3: -+ bus_dmamap_destroy(dma->dma_tag, dma->dma_map); -+fail_2: -+ bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size); -+fail_1: -+ bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs); -+fail_0: -+ dma->dma_map = NULL; -+ dma->dma_vaddr = NULL; -+ dma->nsegs = 0; -+ -+ return NULL; -+} -+ -+void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr) -+{ -+ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; -+ -+ if (dma->dma_map != NULL) { -+ bus_dmamap_sync(dma->dma_tag, dma->dma_map, 0, size, -+ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); -+ bus_dmamap_unload(dma->dma_tag, dma->dma_map); -+ bus_dmamap_destroy(dma->dma_tag, dma->dma_map); -+ bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size); -+ bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs); -+ dma->dma_paddr = 0; -+ dma->dma_map = NULL; -+ dma->dma_vaddr = NULL; -+ dma->nsegs = 0; -+ } -+} -+ -+void *__DWC_ALLOC(void *mem_ctx, uint32_t size) -+{ -+ return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO); -+} -+ -+void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size) -+{ -+ return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO); -+} -+ -+void __DWC_FREE(void *mem_ctx, void *addr) -+{ -+ free(addr, M_DEVBUF); -+} -+ -+ -+#ifdef DWC_CRYPTOLIB -+/* dwc_crypto.h */ -+ -+void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length) -+{ -+ get_random_bytes(buffer, length); -+} -+ -+int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out) -+{ -+ struct crypto_blkcipher *tfm; -+ struct blkcipher_desc desc; -+ struct scatterlist sgd; -+ struct scatterlist sgs; -+ -+ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); -+ if (tfm == NULL) { -+ printk("failed to load transform for aes CBC\n"); -+ return -1; -+ } -+ -+ crypto_blkcipher_setkey(tfm, key, keylen); -+ crypto_blkcipher_set_iv(tfm, iv, 16); -+ -+ sg_init_one(&sgd, out, messagelen); -+ sg_init_one(&sgs, message, messagelen); -+ -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) { -+ crypto_free_blkcipher(tfm); -+ DWC_ERROR("AES CBC encryption failed"); -+ return -1; -+ } -+ -+ crypto_free_blkcipher(tfm); -+ return 0; -+} -+ -+int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out) -+{ -+ struct crypto_hash *tfm; -+ struct hash_desc desc; -+ struct scatterlist sg; -+ -+ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC); -+ if (IS_ERR(tfm)) { -+ DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm)); -+ return 0; -+ } -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ sg_init_one(&sg, message, len); -+ crypto_hash_digest(&desc, &sg, len, out); -+ crypto_free_hash(tfm); -+ -+ return 1; -+} -+ -+int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, -+ uint8_t *key, uint32_t keylen, uint8_t *out) -+{ -+ struct crypto_hash *tfm; -+ struct hash_desc desc; -+ struct scatterlist sg; -+ -+ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC); -+ if (IS_ERR(tfm)) { -+ DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm)); -+ return 0; -+ } -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ sg_init_one(&sg, message, messagelen); -+ crypto_hash_setkey(tfm, key, keylen); -+ crypto_hash_digest(&desc, &sg, messagelen, out); -+ crypto_free_hash(tfm); -+ -+ return 1; -+} -+ -+#endif /* DWC_CRYPTOLIB */ -+ -+ -+/* Byte Ordering Conversions */ -+ -+uint32_t DWC_CPU_TO_LE32(uint32_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_CPU_TO_BE32(uint32_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_LE32_TO_CPU(uint32_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_BE32_TO_CPU(uint32_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint16_t DWC_CPU_TO_LE16(uint16_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_CPU_TO_BE16(uint16_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_LE16_TO_CPU(uint16_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_BE16_TO_CPU(uint16_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+ -+/* Registers */ -+ -+uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ return bus_space_read_4(io->iot, io->ioh, ior); -+} -+ -+#if 0 -+uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ return bus_space_read_8(io->iot, io->ioh, ior); -+} -+#endif -+ -+void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ bus_space_write_4(io->iot, io->ioh, ior, value); -+} -+ -+#if 0 -+void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ bus_space_write_8(io->iot, io->ioh, ior, value); -+} -+#endif -+ -+void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, -+ uint32_t set_mask) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ bus_space_write_4(io->iot, io->ioh, ior, -+ (bus_space_read_4(io->iot, io->ioh, ior) & -+ ~clear_mask) | set_mask); -+} -+ -+#if 0 -+void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, -+ uint64_t set_mask) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ bus_space_write_8(io->iot, io->ioh, ior, -+ (bus_space_read_8(io->iot, io->ioh, ior) & -+ ~clear_mask) | set_mask); -+} -+#endif -+ -+ -+/* Locking */ -+ -+dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void) -+{ -+ struct simplelock *sl = DWC_ALLOC(sizeof(*sl)); -+ -+ if (!sl) { -+ DWC_ERROR("Cannot allocate memory for spinlock"); -+ return NULL; -+ } -+ -+ simple_lock_init(sl); -+ return (dwc_spinlock_t *)sl; -+} -+ -+void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock) -+{ -+ struct simplelock *sl = (struct simplelock *)lock; -+ -+ DWC_FREE(sl); -+} -+ -+void DWC_SPINLOCK(dwc_spinlock_t *lock) -+{ -+ simple_lock((struct simplelock *)lock); -+} -+ -+void DWC_SPINUNLOCK(dwc_spinlock_t *lock) -+{ -+ simple_unlock((struct simplelock *)lock); -+} -+ -+void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags) -+{ -+ simple_lock((struct simplelock *)lock); -+ *flags = splbio(); -+} -+ -+void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags) -+{ -+ splx(flags); -+ simple_unlock((struct simplelock *)lock); -+} -+ -+dwc_mutex_t *DWC_MUTEX_ALLOC(void) -+{ -+ dwc_mutex_t *mutex = DWC_ALLOC(sizeof(struct lock)); -+ -+ if (!mutex) { -+ DWC_ERROR("Cannot allocate memory for mutex"); -+ return NULL; -+ } -+ -+ lockinit((struct lock *)mutex, 0, "dw3mtx", 0, 0); -+ return mutex; -+} -+ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) -+#else -+void DWC_MUTEX_FREE(dwc_mutex_t *mutex) -+{ -+ DWC_FREE(mutex); -+} -+#endif -+ -+void DWC_MUTEX_LOCK(dwc_mutex_t *mutex) -+{ -+ lockmgr((struct lock *)mutex, LK_EXCLUSIVE, NULL); -+} -+ -+int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex) -+{ -+ int status; -+ -+ status = lockmgr((struct lock *)mutex, LK_EXCLUSIVE | LK_NOWAIT, NULL); -+ return status == 0; -+} -+ -+void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex) -+{ -+ lockmgr((struct lock *)mutex, LK_RELEASE, NULL); -+} -+ -+ -+/* Timing */ -+ -+void DWC_UDELAY(uint32_t usecs) -+{ -+ DELAY(usecs); -+} -+ -+void DWC_MDELAY(uint32_t msecs) -+{ -+ do { -+ DELAY(1000); -+ } while (--msecs); -+} -+ -+void DWC_MSLEEP(uint32_t msecs) -+{ -+ struct timeval tv; -+ -+ tv.tv_sec = msecs / 1000; -+ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; -+ tsleep(&tv, 0, "dw3slp", tvtohz(&tv)); -+} -+ -+uint32_t DWC_TIME(void) -+{ -+ struct timeval tv; -+ -+ microuptime(&tv); // or getmicrouptime? (less precise, but faster) -+ return tv.tv_sec * 1000 + tv.tv_usec / 1000; -+} -+ -+ -+/* Timers */ -+ -+struct dwc_timer { -+ struct callout t; -+ char *name; -+ dwc_spinlock_t *lock; -+ dwc_timer_callback_t cb; -+ void *data; -+}; -+ -+dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data) -+{ -+ dwc_timer_t *t = DWC_ALLOC(sizeof(*t)); -+ -+ if (!t) { -+ DWC_ERROR("Cannot allocate memory for timer"); -+ return NULL; -+ } -+ -+ callout_init(&t->t); -+ -+ t->name = DWC_STRDUP(name); -+ if (!t->name) { -+ DWC_ERROR("Cannot allocate memory for timer->name"); -+ goto no_name; -+ } -+ -+ t->lock = DWC_SPINLOCK_ALLOC(); -+ if (!t->lock) { -+ DWC_ERROR("Cannot allocate memory for timer->lock"); -+ goto no_lock; -+ } -+ -+ t->cb = cb; -+ t->data = data; -+ -+ return t; -+ -+ no_lock: -+ DWC_FREE(t->name); -+ no_name: -+ DWC_FREE(t); -+ -+ return NULL; -+} -+ -+void DWC_TIMER_FREE(dwc_timer_t *timer) -+{ -+ callout_stop(&timer->t); -+ DWC_SPINLOCK_FREE(timer->lock); -+ DWC_FREE(timer->name); -+ DWC_FREE(timer); -+} -+ -+void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time) -+{ -+ struct timeval tv; -+ -+ tv.tv_sec = time / 1000; -+ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; -+ callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data); -+} -+ -+void DWC_TIMER_CANCEL(dwc_timer_t *timer) -+{ -+ callout_stop(&timer->t); -+} -+ -+ -+/* Wait Queues */ -+ -+struct dwc_waitq { -+ struct simplelock lock; -+ int abort; -+}; -+ -+dwc_waitq_t *DWC_WAITQ_ALLOC(void) -+{ -+ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq)); -+ -+ if (!wq) { -+ DWC_ERROR("Cannot allocate memory for waitqueue"); -+ return NULL; -+ } -+ -+ simple_lock_init(&wq->lock); -+ wq->abort = 0; -+ -+ return wq; -+} -+ -+void DWC_WAITQ_FREE(dwc_waitq_t *wq) -+{ -+ DWC_FREE(wq); -+} -+ -+int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data) -+{ -+ int ipl; -+ int result = 0; -+ -+ simple_lock(&wq->lock); -+ ipl = splbio(); -+ -+ /* Skip the sleep if already aborted or triggered */ -+ if (!wq->abort && !cond(data)) { -+ splx(ipl); -+ result = ltsleep(wq, PCATCH, "dw3wat", 0, &wq->lock); // infinite timeout -+ ipl = splbio(); -+ } -+ -+ if (result == 0) { // awoken -+ if (wq->abort) { -+ wq->abort = 0; -+ result = -DWC_E_ABORT; -+ } else { -+ result = 0; -+ } -+ -+ splx(ipl); -+ simple_unlock(&wq->lock); -+ } else { -+ wq->abort = 0; -+ splx(ipl); -+ simple_unlock(&wq->lock); -+ -+ if (result == ERESTART) { // signaled - restart -+ result = -DWC_E_RESTART; -+ } else { // signaled - must be EINTR -+ result = -DWC_E_ABORT; -+ } -+ } -+ -+ return result; -+} -+ -+int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, -+ void *data, int32_t msecs) -+{ -+ struct timeval tv, tv1, tv2; -+ int ipl; -+ int result = 0; -+ -+ tv.tv_sec = msecs / 1000; -+ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; -+ -+ simple_lock(&wq->lock); -+ ipl = splbio(); -+ -+ /* Skip the sleep if already aborted or triggered */ -+ if (!wq->abort && !cond(data)) { -+ splx(ipl); -+ getmicrouptime(&tv1); -+ result = ltsleep(wq, PCATCH, "dw3wto", tvtohz(&tv), &wq->lock); -+ getmicrouptime(&tv2); -+ ipl = splbio(); -+ } -+ -+ if (result == 0) { // awoken -+ if (wq->abort) { -+ wq->abort = 0; -+ splx(ipl); -+ simple_unlock(&wq->lock); -+ result = -DWC_E_ABORT; -+ } else { -+ splx(ipl); -+ simple_unlock(&wq->lock); -+ -+ tv2.tv_usec -= tv1.tv_usec; -+ if (tv2.tv_usec < 0) { -+ tv2.tv_usec += 1000000; -+ tv2.tv_sec--; -+ } -+ -+ tv2.tv_sec -= tv1.tv_sec; -+ result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000; -+ result = msecs - result; -+ if (result <= 0) -+ result = 1; -+ } -+ } else { -+ wq->abort = 0; -+ splx(ipl); -+ simple_unlock(&wq->lock); -+ -+ if (result == ERESTART) { // signaled - restart -+ result = -DWC_E_RESTART; -+ -+ } else if (result == EINTR) { // signaled - interrupt -+ result = -DWC_E_ABORT; -+ -+ } else { // timed out -+ result = -DWC_E_TIMEOUT; -+ } -+ } -+ -+ return result; -+} -+ -+void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq) -+{ -+ wakeup(wq); -+} -+ -+void DWC_WAITQ_ABORT(dwc_waitq_t *wq) -+{ -+ int ipl; -+ -+ simple_lock(&wq->lock); -+ ipl = splbio(); -+ wq->abort = 1; -+ wakeup(wq); -+ splx(ipl); -+ simple_unlock(&wq->lock); -+} -+ -+ -+/* Threading */ -+ -+struct dwc_thread { -+ struct proc *proc; -+ int abort; -+}; -+ -+dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data) -+{ -+ int retval; -+ dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread)); -+ -+ if (!thread) { -+ return NULL; -+ } -+ -+ thread->abort = 0; -+ retval = kthread_create1((void (*)(void *))func, data, &thread->proc, -+ "%s", name); -+ if (retval) { -+ DWC_FREE(thread); -+ return NULL; -+ } -+ -+ return thread; -+} -+ -+int DWC_THREAD_STOP(dwc_thread_t *thread) -+{ -+ int retval; -+ -+ thread->abort = 1; -+ retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz); -+ -+ if (retval == 0) { -+ /* DWC_THREAD_EXIT() will free the thread struct */ -+ return 0; -+ } -+ -+ /* NOTE: We leak the thread struct if thread doesn't die */ -+ -+ if (retval == EWOULDBLOCK) { -+ return -DWC_E_TIMEOUT; -+ } -+ -+ return -DWC_E_UNKNOWN; -+} -+ -+dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread) -+{ -+ return thread->abort; -+} -+ -+void DWC_THREAD_EXIT(dwc_thread_t *thread) -+{ -+ wakeup(&thread->abort); -+ DWC_FREE(thread); -+ kthread_exit(0); -+} -+ -+/* tasklets -+ - Runs in interrupt context (cannot sleep) -+ - Each tasklet runs on a single CPU -+ - Different tasklets can be running simultaneously on different CPUs -+ [ On NetBSD there is no corresponding mechanism, drivers don't have bottom- -+ halves. So we just call the callback directly from DWC_TASK_SCHEDULE() ] -+ */ -+struct dwc_tasklet { -+ dwc_tasklet_callback_t cb; -+ void *data; -+}; -+ -+static void tasklet_callback(void *data) -+{ -+ dwc_tasklet_t *task = (dwc_tasklet_t *)data; -+ -+ task->cb(task->data); -+} -+ -+dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data) -+{ -+ dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task)); -+ -+ if (task) { -+ task->cb = cb; -+ task->data = data; -+ } else { -+ DWC_ERROR("Cannot allocate memory for tasklet"); -+ } -+ -+ return task; -+} -+ -+void DWC_TASK_FREE(dwc_tasklet_t *task) -+{ -+ DWC_FREE(task); -+} -+ -+void DWC_TASK_SCHEDULE(dwc_tasklet_t *task) -+{ -+ tasklet_callback(task); -+} -+ -+ -+/* workqueues -+ - Runs in process context (can sleep) -+ */ -+typedef struct work_container { -+ dwc_work_callback_t cb; -+ void *data; -+ dwc_workq_t *wq; -+ char *name; -+ int hz; -+ struct work task; -+} work_container_t; -+ -+struct dwc_workq { -+ struct workqueue *taskq; -+ dwc_spinlock_t *lock; -+ dwc_waitq_t *waitq; -+ int pending; -+ struct work_container *container; -+}; -+ -+static void do_work(struct work *task, void *data) -+{ -+ dwc_workq_t *wq = (dwc_workq_t *)data; -+ work_container_t *container = wq->container; -+ dwc_irqflags_t flags; -+ -+ if (container->hz) { -+ tsleep(container, 0, "dw3wrk", container->hz); -+ } -+ -+ container->cb(container->data); -+ DWC_DEBUG("Work done: %s, container=%p", container->name, container); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ if (container->name) -+ DWC_FREE(container->name); -+ DWC_FREE(container); -+ wq->pending--; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+} -+ -+static int work_done(void *data) -+{ -+ dwc_workq_t *workq = (dwc_workq_t *)data; -+ -+ return workq->pending == 0; -+} -+ -+int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout) -+{ -+ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout); -+} -+ -+dwc_workq_t *DWC_WORKQ_ALLOC(char *name) -+{ -+ int result; -+ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq)); -+ -+ if (!wq) { -+ DWC_ERROR("Cannot allocate memory for workqueue"); -+ return NULL; -+ } -+ -+ result = workqueue_create(&wq->taskq, name, do_work, wq, 0 /*PWAIT*/, -+ IPL_BIO, 0); -+ if (result) { -+ DWC_ERROR("Cannot create workqueue"); -+ goto no_taskq; -+ } -+ -+ wq->pending = 0; -+ -+ wq->lock = DWC_SPINLOCK_ALLOC(); -+ if (!wq->lock) { -+ DWC_ERROR("Cannot allocate memory for spinlock"); -+ goto no_lock; -+ } -+ -+ wq->waitq = DWC_WAITQ_ALLOC(); -+ if (!wq->waitq) { -+ DWC_ERROR("Cannot allocate memory for waitqueue"); -+ goto no_waitq; -+ } -+ -+ return wq; -+ -+ no_waitq: -+ DWC_SPINLOCK_FREE(wq->lock); -+ no_lock: -+ workqueue_destroy(wq->taskq); -+ no_taskq: -+ DWC_FREE(wq); -+ -+ return NULL; -+} -+ -+void DWC_WORKQ_FREE(dwc_workq_t *wq) -+{ -+#ifdef DEBUG -+ dwc_irqflags_t flags; -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ -+ if (wq->pending != 0) { -+ struct work_container *container = wq->container; -+ -+ DWC_ERROR("Destroying work queue with pending work"); -+ -+ if (container && container->name) { -+ DWC_ERROR("Work %s still pending", container->name); -+ } -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+#endif -+ DWC_WAITQ_FREE(wq->waitq); -+ DWC_SPINLOCK_FREE(wq->lock); -+ workqueue_destroy(wq->taskq); -+ DWC_FREE(wq); -+} -+ -+void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data, -+ char *format, ...) -+{ -+ dwc_irqflags_t flags; -+ work_container_t *container; -+ static char name[128]; -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VSNPRINTF(name, 128, format, args); -+ va_end(args); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ wq->pending++; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+ -+ container = DWC_ALLOC_ATOMIC(sizeof(*container)); -+ if (!container) { -+ DWC_ERROR("Cannot allocate memory for container"); -+ return; -+ } -+ -+ container->name = DWC_STRDUP(name); -+ if (!container->name) { -+ DWC_ERROR("Cannot allocate memory for container->name"); -+ DWC_FREE(container); -+ return; -+ } -+ -+ container->cb = cb; -+ container->data = data; -+ container->wq = wq; -+ container->hz = 0; -+ wq->container = container; -+ -+ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); -+ workqueue_enqueue(wq->taskq, &container->task); -+} -+ -+void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb, -+ void *data, uint32_t time, char *format, ...) -+{ -+ dwc_irqflags_t flags; -+ work_container_t *container; -+ static char name[128]; -+ struct timeval tv; -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VSNPRINTF(name, 128, format, args); -+ va_end(args); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ wq->pending++; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+ -+ container = DWC_ALLOC_ATOMIC(sizeof(*container)); -+ if (!container) { -+ DWC_ERROR("Cannot allocate memory for container"); -+ return; -+ } -+ -+ container->name = DWC_STRDUP(name); -+ if (!container->name) { -+ DWC_ERROR("Cannot allocate memory for container->name"); -+ DWC_FREE(container); -+ return; -+ } -+ -+ container->cb = cb; -+ container->data = data; -+ container->wq = wq; -+ tv.tv_sec = time / 1000; -+ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; -+ container->hz = tvtohz(&tv); -+ wq->container = container; -+ -+ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); -+ workqueue_enqueue(wq->taskq, &container->task); -+} -+ -+int DWC_WORKQ_PENDING(dwc_workq_t *wq) -+{ -+ return wq->pending; -+} ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_crypto.c -@@ -0,0 +1,308 @@ -+/* ========================================================================= -+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.c $ -+ * $Revision: #5 $ -+ * $Date: 2010/09/28 $ -+ * $Change: 1596182 $ -+ * -+ * Synopsys Portability Library Software and documentation -+ * (hereinafter, "Software") is an Unsupported proprietary work of -+ * Synopsys, Inc. unless otherwise expressly agreed to in writing -+ * between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product -+ * under any End User Software License Agreement or Agreement for -+ * Licensed Product with Synopsys or any supplement thereto. You are -+ * permitted to use and redistribute this Software in source and binary -+ * forms, with or without modification, provided that redistributions -+ * of source code must retain this notice. You may not view, use, -+ * disclose, copy or distribute this file or any information contained -+ * herein except pursuant to this license grant from Synopsys. If you -+ * do not agree with this notice, including the disclaimer below, then -+ * you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" -+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL -+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY -+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================= */ -+ -+/** @file -+ * This file contains the WUSB cryptographic routines. -+ */ -+ -+#ifdef DWC_CRYPTOLIB -+ -+#include "dwc_crypto.h" -+#include "usb.h" -+ -+#ifdef DEBUG -+static inline void dump_bytes(char *name, uint8_t *bytes, int len) -+{ -+ int i; -+ DWC_PRINTF("%s: ", name); -+ for (i=0; idst == src, then the bytes will be encrypted -+ * in-place. -+ * -+ * @return 0 on success, negative error code on error. -+ */ -+int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst) -+{ -+ u8 block_t[16]; -+ DWC_MEMSET(block_t, 0, 16); -+ -+ return DWC_AES_CBC(src, 16, key, 16, block_t, dst); -+} -+ -+/** -+ * The CCM-MAC-FUNCTION described in section 6.5 of the WUSB spec. -+ * This function takes a data string and returns the encrypted CBC -+ * Counter-mode MIC. -+ * -+ * @param key The 128-bit symmetric key. -+ * @param nonce The CCM nonce. -+ * @param label The unique 14-byte ASCII text label. -+ * @param bytes The byte array to be encrypted. -+ * @param len Length of the byte array. -+ * @param result Byte array to receive the 8-byte encrypted MIC. -+ */ -+void dwc_wusb_cmf(u8 *key, u8 *nonce, -+ char *label, u8 *bytes, int len, u8 *result) -+{ -+ u8 block_m[16]; -+ u8 block_x[16]; -+ u8 block_t[8]; -+ int idx, blkNum; -+ u16 la = (u16)(len + 14); -+ -+ /* Set the AES-128 key */ -+ //dwc_aes_setkey(tfm, key, 16); -+ -+ /* Fill block B0 from flags = 0x59, N, and l(m) = 0 */ -+ block_m[0] = 0x59; -+ for (idx = 0; idx < 13; idx++) -+ block_m[idx + 1] = nonce[idx]; -+ block_m[14] = 0; -+ block_m[15] = 0; -+ -+ /* Produce the CBC IV */ -+ dwc_wusb_aes_encrypt(block_m, key, block_x); -+ show_block(block_m, "CBC IV in: ", "\n", 0); -+ show_block(block_x, "CBC IV out:", "\n", 0); -+ -+ /* Fill block B1 from l(a) = Blen + 14, and A */ -+ block_x[0] ^= (u8)(la >> 8); -+ block_x[1] ^= (u8)la; -+ for (idx = 0; idx < 14; idx++) -+ block_x[idx + 2] ^= label[idx]; -+ show_block(block_x, "After xor: ", "b1\n", 16); -+ -+ dwc_wusb_aes_encrypt(block_x, key, block_x); -+ show_block(block_x, "After AES: ", "b1\n", 16); -+ -+ idx = 0; -+ blkNum = 0; -+ -+ /* Fill remaining blocks with B */ -+ while (len-- > 0) { -+ block_x[idx] ^= *bytes++; -+ if (++idx >= 16) { -+ idx = 0; -+ show_block(block_x, "After xor: ", "\n", blkNum); -+ dwc_wusb_aes_encrypt(block_x, key, block_x); -+ show_block(block_x, "After AES: ", "\n", blkNum); -+ blkNum++; -+ } -+ } -+ -+ /* Handle partial last block */ -+ if (idx > 0) { -+ show_block(block_x, "After xor: ", "\n", blkNum); -+ dwc_wusb_aes_encrypt(block_x, key, block_x); -+ show_block(block_x, "After AES: ", "\n", blkNum); -+ } -+ -+ /* Save the MIC tag */ -+ DWC_MEMCPY(block_t, block_x, 8); -+ show_block(block_t, "MIC tag : ", NULL, 8); -+ -+ /* Fill block A0 from flags = 0x01, N, and counter = 0 */ -+ block_m[0] = 0x01; -+ block_m[14] = 0; -+ block_m[15] = 0; -+ -+ /* Encrypt the counter */ -+ dwc_wusb_aes_encrypt(block_m, key, block_x); -+ show_block(block_x, "CTR[MIC] : ", NULL, 8); -+ -+ /* XOR with MIC tag */ -+ for (idx = 0; idx < 8; idx++) { -+ block_t[idx] ^= block_x[idx]; -+ } -+ -+ /* Return result to caller */ -+ DWC_MEMCPY(result, block_t, 8); -+ show_block(result, "CCM-MIC : ", NULL, 8); -+ -+} -+ -+/** -+ * The PRF function described in section 6.5 of the WUSB spec. This function -+ * concatenates MIC values returned from dwc_cmf() to create a value of -+ * the requested length. -+ * -+ * @param prf_len Length of the PRF function in bits (64, 128, or 256). -+ * @param key, nonce, label, bytes, len Same as for dwc_cmf(). -+ * @param result Byte array to receive the result. -+ */ -+void dwc_wusb_prf(int prf_len, u8 *key, -+ u8 *nonce, char *label, u8 *bytes, int len, u8 *result) -+{ -+ int i; -+ -+ nonce[0] = 0; -+ for (i = 0; i < prf_len >> 6; i++, nonce[0]++) { -+ dwc_wusb_cmf(key, nonce, label, bytes, len, result); -+ result += 8; -+ } -+} -+ -+/** -+ * Fills in CCM Nonce per the WUSB spec. -+ * -+ * @param[in] haddr Host address. -+ * @param[in] daddr Device address. -+ * @param[in] tkid Session Key(PTK) identifier. -+ * @param[out] nonce Pointer to where the CCM Nonce output is to be written. -+ */ -+void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid, -+ uint8_t *nonce) -+{ -+ -+ DWC_DEBUG("%s %x %x\n", __func__, daddr, haddr); -+ -+ DWC_MEMSET(&nonce[0], 0, 16); -+ -+ DWC_MEMCPY(&nonce[6], tkid, 3); -+ nonce[9] = daddr & 0xFF; -+ nonce[10] = (daddr >> 8) & 0xFF; -+ nonce[11] = haddr & 0xFF; -+ nonce[12] = (haddr >> 8) & 0xFF; -+ -+ dump_bytes("CCM nonce", nonce, 16); -+} -+ -+/** -+ * Generates a 16-byte cryptographic-grade random number for the Host/Device -+ * Nonce. -+ */ -+void dwc_wusb_gen_nonce(uint16_t addr, uint8_t *nonce) -+{ -+ uint8_t inonce[16]; -+ uint32_t temp[4]; -+ -+ /* Fill in the Nonce */ -+ DWC_MEMSET(&inonce[0], 0, sizeof(inonce)); -+ inonce[9] = addr & 0xFF; -+ inonce[10] = (addr >> 8) & 0xFF; -+ inonce[11] = inonce[9]; -+ inonce[12] = inonce[10]; -+ -+ /* Collect "randomness samples" */ -+ DWC_RANDOM_BYTES((uint8_t *)temp, 16); -+ -+ dwc_wusb_prf_128((uint8_t *)temp, nonce, -+ "Random Numbers", (uint8_t *)temp, sizeof(temp), -+ nonce); -+} -+ -+/** -+ * Generates the Session Key (PTK) and Key Confirmation Key (KCK) per the -+ * WUSB spec. -+ * -+ * @param[in] ccm_nonce Pointer to CCM Nonce. -+ * @param[in] mk Master Key to derive the session from -+ * @param[in] hnonce Pointer to Host Nonce. -+ * @param[in] dnonce Pointer to Device Nonce. -+ * @param[out] kck Pointer to where the KCK output is to be written. -+ * @param[out] ptk Pointer to where the PTK output is to be written. -+ */ -+void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk, uint8_t *hnonce, -+ uint8_t *dnonce, uint8_t *kck, uint8_t *ptk) -+{ -+ uint8_t idata[32]; -+ uint8_t odata[32]; -+ -+ dump_bytes("ck", mk, 16); -+ dump_bytes("hnonce", hnonce, 16); -+ dump_bytes("dnonce", dnonce, 16); -+ -+ /* The data is the HNonce and DNonce concatenated */ -+ DWC_MEMCPY(&idata[0], hnonce, 16); -+ DWC_MEMCPY(&idata[16], dnonce, 16); -+ -+ dwc_wusb_prf_256(mk, ccm_nonce, "Pair-wise keys", idata, 32, odata); -+ -+ /* Low 16 bytes of the result is the KCK, high 16 is the PTK */ -+ DWC_MEMCPY(kck, &odata[0], 16); -+ DWC_MEMCPY(ptk, &odata[16], 16); -+ -+ dump_bytes("kck", kck, 16); -+ dump_bytes("ptk", ptk, 16); -+} -+ -+/** -+ * Generates the Message Integrity Code over the Handshake data per the -+ * WUSB spec. -+ * -+ * @param ccm_nonce Pointer to CCM Nonce. -+ * @param kck Pointer to Key Confirmation Key. -+ * @param data Pointer to Handshake data to be checked. -+ * @param mic Pointer to where the MIC output is to be written. -+ */ -+void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t *kck, -+ uint8_t *data, uint8_t *mic) -+{ -+ -+ dwc_wusb_prf_64(kck, ccm_nonce, "out-of-bandMIC", -+ data, WUSB_HANDSHAKE_LEN_FOR_MIC, mic); -+} -+ -+#endif /* DWC_CRYPTOLIB */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_crypto.h -@@ -0,0 +1,111 @@ -+/* ========================================================================= -+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.h $ -+ * $Revision: #3 $ -+ * $Date: 2010/09/28 $ -+ * $Change: 1596182 $ -+ * -+ * Synopsys Portability Library Software and documentation -+ * (hereinafter, "Software") is an Unsupported proprietary work of -+ * Synopsys, Inc. unless otherwise expressly agreed to in writing -+ * between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product -+ * under any End User Software License Agreement or Agreement for -+ * Licensed Product with Synopsys or any supplement thereto. You are -+ * permitted to use and redistribute this Software in source and binary -+ * forms, with or without modification, provided that redistributions -+ * of source code must retain this notice. You may not view, use, -+ * disclose, copy or distribute this file or any information contained -+ * herein except pursuant to this license grant from Synopsys. If you -+ * do not agree with this notice, including the disclaimer below, then -+ * you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" -+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL -+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY -+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================= */ -+ -+#ifndef _DWC_CRYPTO_H_ -+#define _DWC_CRYPTO_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/** @file -+ * -+ * This file contains declarations for the WUSB Cryptographic routines as -+ * defined in the WUSB spec. They are only to be used internally by the DWC UWB -+ * modules. -+ */ -+ -+#include "dwc_os.h" -+ -+int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst); -+ -+void dwc_wusb_cmf(u8 *key, u8 *nonce, -+ char *label, u8 *bytes, int len, u8 *result); -+void dwc_wusb_prf(int prf_len, u8 *key, -+ u8 *nonce, char *label, u8 *bytes, int len, u8 *result); -+ -+/** -+ * The PRF-64 function described in section 6.5 of the WUSB spec. -+ * -+ * @param key, nonce, label, bytes, len, result Same as for dwc_prf(). -+ */ -+static inline void dwc_wusb_prf_64(u8 *key, u8 *nonce, -+ char *label, u8 *bytes, int len, u8 *result) -+{ -+ dwc_wusb_prf(64, key, nonce, label, bytes, len, result); -+} -+ -+/** -+ * The PRF-128 function described in section 6.5 of the WUSB spec. -+ * -+ * @param key, nonce, label, bytes, len, result Same as for dwc_prf(). -+ */ -+static inline void dwc_wusb_prf_128(u8 *key, u8 *nonce, -+ char *label, u8 *bytes, int len, u8 *result) -+{ -+ dwc_wusb_prf(128, key, nonce, label, bytes, len, result); -+} -+ -+/** -+ * The PRF-256 function described in section 6.5 of the WUSB spec. -+ * -+ * @param key, nonce, label, bytes, len, result Same as for dwc_prf(). -+ */ -+static inline void dwc_wusb_prf_256(u8 *key, u8 *nonce, -+ char *label, u8 *bytes, int len, u8 *result) -+{ -+ dwc_wusb_prf(256, key, nonce, label, bytes, len, result); -+} -+ -+ -+void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid, -+ uint8_t *nonce); -+void dwc_wusb_gen_nonce(uint16_t addr, -+ uint8_t *nonce); -+ -+void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk, -+ uint8_t *hnonce, uint8_t *dnonce, -+ uint8_t *kck, uint8_t *ptk); -+ -+ -+void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t -+ *kck, uint8_t *data, uint8_t *mic); -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _DWC_CRYPTO_H_ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_dh.c -@@ -0,0 +1,291 @@ -+/* ========================================================================= -+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_dh.c $ -+ * $Revision: #3 $ -+ * $Date: 2010/09/28 $ -+ * $Change: 1596182 $ -+ * -+ * Synopsys Portability Library Software and documentation -+ * (hereinafter, "Software") is an Unsupported proprietary work of -+ * Synopsys, Inc. unless otherwise expressly agreed to in writing -+ * between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product -+ * under any End User Software License Agreement or Agreement for -+ * Licensed Product with Synopsys or any supplement thereto. You are -+ * permitted to use and redistribute this Software in source and binary -+ * forms, with or without modification, provided that redistributions -+ * of source code must retain this notice. You may not view, use, -+ * disclose, copy or distribute this file or any information contained -+ * herein except pursuant to this license grant from Synopsys. If you -+ * do not agree with this notice, including the disclaimer below, then -+ * you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" -+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL -+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY -+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================= */ -+#ifdef DWC_CRYPTOLIB -+ -+#ifndef CONFIG_MACH_IPMATE -+ -+#include "dwc_dh.h" -+#include "dwc_modpow.h" -+ -+#ifdef DEBUG -+/* This function prints out a buffer in the format described in the Association -+ * Model specification. */ -+static void dh_dump(char *str, void *_num, int len) -+{ -+ uint8_t *num = _num; -+ int i; -+ DWC_PRINTF("%s\n", str); -+ for (i = 0; i < len; i ++) { -+ DWC_PRINTF("%02x", num[i]); -+ if (((i + 1) % 2) == 0) DWC_PRINTF(" "); -+ if (((i + 1) % 26) == 0) DWC_PRINTF("\n"); -+ } -+ -+ DWC_PRINTF("\n"); -+} -+#else -+#define dh_dump(_x...) do {; } while(0) -+#endif -+ -+/* Constant g value */ -+static __u32 dh_g[] = { -+ 0x02000000, -+}; -+ -+/* Constant p value */ -+static __u32 dh_p[] = { -+ 0xFFFFFFFF, 0xFFFFFFFF, 0xA2DA0FC9, 0x34C26821, 0x8B62C6C4, 0xD11CDC80, 0x084E0229, 0x74CC678A, -+ 0xA6BE0B02, 0x229B133B, 0x79084A51, 0xDD04348E, 0xB31995EF, 0x1B433ACD, 0x6D0A2B30, 0x37145FF2, -+ 0x6D35E14F, 0x45C2516D, 0x76B585E4, 0xC67E5E62, 0xE9424CF4, 0x6BED37A6, 0xB65CFF0B, 0xEDB706F4, -+ 0xFB6B38EE, 0xA59F895A, 0x11249FAE, 0xE61F4B7C, 0x51662849, 0x3D5BE4EC, 0xB87C00C2, 0x05BF63A1, -+ 0x3648DA98, 0x9AD3551C, 0xA83F1669, 0x5FCF24FD, 0x235D6583, 0x96ADA3DC, 0x56F3621C, 0xBB528520, -+ 0x0729D59E, 0x6D969670, 0x4E350C67, 0x0498BC4A, 0x086C74F1, 0x7C2118CA, 0x465E9032, 0x3BCE362E, -+ 0x2C779EE3, 0x03860E18, 0xA283279B, 0x8FA207EC, 0xF05DC5B5, 0xC9524C6F, 0xF6CB2BDE, 0x18175895, -+ 0x7C499539, 0xE56A95EA, 0x1826D215, 0x1005FA98, 0x5A8E7215, 0x2DC4AA8A, 0x0D1733AD, 0x337A5004, -+ 0xAB2155A8, 0x64BA1CDF, 0x0485FBEC, 0x0AEFDB58, 0x5771EA8A, 0x7D0C065D, 0x850F97B3, 0xC7E4E1A6, -+ 0x8CAEF5AB, 0xD73309DB, 0xE0948C1E, 0x9D61254A, 0x26D2E3CE, 0x6BEED21A, 0x06FA2FF1, 0x64088AD9, -+ 0x730276D8, 0x646AC83E, 0x182B1F52, 0x0C207B17, 0x5717E1BB, 0x6C5D617A, 0xC0880977, 0xE246D9BA, -+ 0xA04FE208, 0x31ABE574, 0xFC5BDB43, 0x8E10FDE0, 0x20D1824B, 0xCAD23AA9, 0xFFFFFFFF, 0xFFFFFFFF, -+}; -+ -+static void dh_swap_bytes(void *_in, void *_out, uint32_t len) -+{ -+ uint8_t *in = _in; -+ uint8_t *out = _out; -+ int i; -+ for (i=0; inext = (link); \ -+ (link)->prev = (link); \ -+} while (0) -+ -+#define DWC_LIST_FIRST(link) ((link)->next) -+#define DWC_LIST_LAST(link) ((link)->prev) -+#define DWC_LIST_END(link) (link) -+#define DWC_LIST_NEXT(link) ((link)->next) -+#define DWC_LIST_PREV(link) ((link)->prev) -+#define DWC_LIST_EMPTY(link) \ -+ (DWC_LIST_FIRST(link) == DWC_LIST_END(link)) -+#define DWC_LIST_ENTRY(link, type, field) \ -+ (type *)((uint8_t *)(link) - (size_t)(&((type *)0)->field)) -+ -+#if 0 -+#define DWC_LIST_INSERT_HEAD(list, link) do { \ -+ (link)->next = (list)->next; \ -+ (link)->prev = (list); \ -+ (list)->next->prev = (link); \ -+ (list)->next = (link); \ -+} while (0) -+ -+#define DWC_LIST_INSERT_TAIL(list, link) do { \ -+ (link)->next = (list); \ -+ (link)->prev = (list)->prev; \ -+ (list)->prev->next = (link); \ -+ (list)->prev = (link); \ -+} while (0) -+#else -+#define DWC_LIST_INSERT_HEAD(list, link) do { \ -+ dwc_list_link_t *__next__ = (list)->next; \ -+ __next__->prev = (link); \ -+ (link)->next = __next__; \ -+ (link)->prev = (list); \ -+ (list)->next = (link); \ -+} while (0) -+ -+#define DWC_LIST_INSERT_TAIL(list, link) do { \ -+ dwc_list_link_t *__prev__ = (list)->prev; \ -+ (list)->prev = (link); \ -+ (link)->next = (list); \ -+ (link)->prev = __prev__; \ -+ __prev__->next = (link); \ -+} while (0) -+#endif -+ -+#if 0 -+static inline void __list_add(struct list_head *new, -+ struct list_head *prev, -+ struct list_head *next) -+{ -+ next->prev = new; -+ new->next = next; -+ new->prev = prev; -+ prev->next = new; -+} -+ -+static inline void list_add(struct list_head *new, struct list_head *head) -+{ -+ __list_add(new, head, head->next); -+} -+ -+static inline void list_add_tail(struct list_head *new, struct list_head *head) -+{ -+ __list_add(new, head->prev, head); -+} -+ -+static inline void __list_del(struct list_head * prev, struct list_head * next) -+{ -+ next->prev = prev; -+ prev->next = next; -+} -+ -+static inline void list_del(struct list_head *entry) -+{ -+ __list_del(entry->prev, entry->next); -+ entry->next = LIST_POISON1; -+ entry->prev = LIST_POISON2; -+} -+#endif -+ -+#define DWC_LIST_REMOVE(link) do { \ -+ (link)->next->prev = (link)->prev; \ -+ (link)->prev->next = (link)->next; \ -+} while (0) -+ -+#define DWC_LIST_REMOVE_INIT(link) do { \ -+ DWC_LIST_REMOVE(link); \ -+ DWC_LIST_INIT(link); \ -+} while (0) -+ -+#define DWC_LIST_MOVE_HEAD(list, link) do { \ -+ DWC_LIST_REMOVE(link); \ -+ DWC_LIST_INSERT_HEAD(list, link); \ -+} while (0) -+ -+#define DWC_LIST_MOVE_TAIL(list, link) do { \ -+ DWC_LIST_REMOVE(link); \ -+ DWC_LIST_INSERT_TAIL(list, link); \ -+} while (0) -+ -+#define DWC_LIST_FOREACH(var, list) \ -+ for((var) = DWC_LIST_FIRST(list); \ -+ (var) != DWC_LIST_END(list); \ -+ (var) = DWC_LIST_NEXT(var)) -+ -+#define DWC_LIST_FOREACH_SAFE(var, var2, list) \ -+ for((var) = DWC_LIST_FIRST(list), (var2) = DWC_LIST_NEXT(var); \ -+ (var) != DWC_LIST_END(list); \ -+ (var) = (var2), (var2) = DWC_LIST_NEXT(var2)) -+ -+#define DWC_LIST_FOREACH_REVERSE(var, list) \ -+ for((var) = DWC_LIST_LAST(list); \ -+ (var) != DWC_LIST_END(list); \ -+ (var) = DWC_LIST_PREV(var)) -+ -+/* -+ * Singly-linked List definitions. -+ */ -+#define DWC_SLIST_HEAD(name, type) \ -+struct name { \ -+ struct type *slh_first; /* first element */ \ -+} -+ -+#define DWC_SLIST_HEAD_INITIALIZER(head) \ -+ { NULL } -+ -+#define DWC_SLIST_ENTRY(type) \ -+struct { \ -+ struct type *sle_next; /* next element */ \ -+} -+ -+/* -+ * Singly-linked List access methods. -+ */ -+#define DWC_SLIST_FIRST(head) ((head)->slh_first) -+#define DWC_SLIST_END(head) NULL -+#define DWC_SLIST_EMPTY(head) (SLIST_FIRST(head) == SLIST_END(head)) -+#define DWC_SLIST_NEXT(elm, field) ((elm)->field.sle_next) -+ -+#define DWC_SLIST_FOREACH(var, head, field) \ -+ for((var) = SLIST_FIRST(head); \ -+ (var) != SLIST_END(head); \ -+ (var) = SLIST_NEXT(var, field)) -+ -+#define DWC_SLIST_FOREACH_PREVPTR(var, varp, head, field) \ -+ for((varp) = &SLIST_FIRST((head)); \ -+ ((var) = *(varp)) != SLIST_END(head); \ -+ (varp) = &SLIST_NEXT((var), field)) -+ -+/* -+ * Singly-linked List functions. -+ */ -+#define DWC_SLIST_INIT(head) { \ -+ SLIST_FIRST(head) = SLIST_END(head); \ -+} -+ -+#define DWC_SLIST_INSERT_AFTER(slistelm, elm, field) do { \ -+ (elm)->field.sle_next = (slistelm)->field.sle_next; \ -+ (slistelm)->field.sle_next = (elm); \ -+} while (0) -+ -+#define DWC_SLIST_INSERT_HEAD(head, elm, field) do { \ -+ (elm)->field.sle_next = (head)->slh_first; \ -+ (head)->slh_first = (elm); \ -+} while (0) -+ -+#define DWC_SLIST_REMOVE_NEXT(head, elm, field) do { \ -+ (elm)->field.sle_next = (elm)->field.sle_next->field.sle_next; \ -+} while (0) -+ -+#define DWC_SLIST_REMOVE_HEAD(head, field) do { \ -+ (head)->slh_first = (head)->slh_first->field.sle_next; \ -+} while (0) -+ -+#define DWC_SLIST_REMOVE(head, elm, type, field) do { \ -+ if ((head)->slh_first == (elm)) { \ -+ SLIST_REMOVE_HEAD((head), field); \ -+ } \ -+ else { \ -+ struct type *curelm = (head)->slh_first; \ -+ while( curelm->field.sle_next != (elm) ) \ -+ curelm = curelm->field.sle_next; \ -+ curelm->field.sle_next = \ -+ curelm->field.sle_next->field.sle_next; \ -+ } \ -+} while (0) -+ -+/* -+ * Simple queue definitions. -+ */ -+#define DWC_SIMPLEQ_HEAD(name, type) \ -+struct name { \ -+ struct type *sqh_first; /* first element */ \ -+ struct type **sqh_last; /* addr of last next element */ \ -+} -+ -+#define DWC_SIMPLEQ_HEAD_INITIALIZER(head) \ -+ { NULL, &(head).sqh_first } -+ -+#define DWC_SIMPLEQ_ENTRY(type) \ -+struct { \ -+ struct type *sqe_next; /* next element */ \ -+} -+ -+/* -+ * Simple queue access methods. -+ */ -+#define DWC_SIMPLEQ_FIRST(head) ((head)->sqh_first) -+#define DWC_SIMPLEQ_END(head) NULL -+#define DWC_SIMPLEQ_EMPTY(head) (SIMPLEQ_FIRST(head) == SIMPLEQ_END(head)) -+#define DWC_SIMPLEQ_NEXT(elm, field) ((elm)->field.sqe_next) -+ -+#define DWC_SIMPLEQ_FOREACH(var, head, field) \ -+ for((var) = SIMPLEQ_FIRST(head); \ -+ (var) != SIMPLEQ_END(head); \ -+ (var) = SIMPLEQ_NEXT(var, field)) -+ -+/* -+ * Simple queue functions. -+ */ -+#define DWC_SIMPLEQ_INIT(head) do { \ -+ (head)->sqh_first = NULL; \ -+ (head)->sqh_last = &(head)->sqh_first; \ -+} while (0) -+ -+#define DWC_SIMPLEQ_INSERT_HEAD(head, elm, field) do { \ -+ if (((elm)->field.sqe_next = (head)->sqh_first) == NULL) \ -+ (head)->sqh_last = &(elm)->field.sqe_next; \ -+ (head)->sqh_first = (elm); \ -+} while (0) -+ -+#define DWC_SIMPLEQ_INSERT_TAIL(head, elm, field) do { \ -+ (elm)->field.sqe_next = NULL; \ -+ *(head)->sqh_last = (elm); \ -+ (head)->sqh_last = &(elm)->field.sqe_next; \ -+} while (0) -+ -+#define DWC_SIMPLEQ_INSERT_AFTER(head, listelm, elm, field) do { \ -+ if (((elm)->field.sqe_next = (listelm)->field.sqe_next) == NULL)\ -+ (head)->sqh_last = &(elm)->field.sqe_next; \ -+ (listelm)->field.sqe_next = (elm); \ -+} while (0) -+ -+#define DWC_SIMPLEQ_REMOVE_HEAD(head, field) do { \ -+ if (((head)->sqh_first = (head)->sqh_first->field.sqe_next) == NULL) \ -+ (head)->sqh_last = &(head)->sqh_first; \ -+} while (0) -+ -+/* -+ * Tail queue definitions. -+ */ -+#define DWC_TAILQ_HEAD(name, type) \ -+struct name { \ -+ struct type *tqh_first; /* first element */ \ -+ struct type **tqh_last; /* addr of last next element */ \ -+} -+ -+#define DWC_TAILQ_HEAD_INITIALIZER(head) \ -+ { NULL, &(head).tqh_first } -+ -+#define DWC_TAILQ_ENTRY(type) \ -+struct { \ -+ struct type *tqe_next; /* next element */ \ -+ struct type **tqe_prev; /* address of previous next element */ \ -+} -+ -+/* -+ * tail queue access methods -+ */ -+#define DWC_TAILQ_FIRST(head) ((head)->tqh_first) -+#define DWC_TAILQ_END(head) NULL -+#define DWC_TAILQ_NEXT(elm, field) ((elm)->field.tqe_next) -+#define DWC_TAILQ_LAST(head, headname) \ -+ (*(((struct headname *)((head)->tqh_last))->tqh_last)) -+/* XXX */ -+#define DWC_TAILQ_PREV(elm, headname, field) \ -+ (*(((struct headname *)((elm)->field.tqe_prev))->tqh_last)) -+#define DWC_TAILQ_EMPTY(head) \ -+ (DWC_TAILQ_FIRST(head) == DWC_TAILQ_END(head)) -+ -+#define DWC_TAILQ_FOREACH(var, head, field) \ -+ for ((var) = DWC_TAILQ_FIRST(head); \ -+ (var) != DWC_TAILQ_END(head); \ -+ (var) = DWC_TAILQ_NEXT(var, field)) -+ -+#define DWC_TAILQ_FOREACH_REVERSE(var, head, headname, field) \ -+ for ((var) = DWC_TAILQ_LAST(head, headname); \ -+ (var) != DWC_TAILQ_END(head); \ -+ (var) = DWC_TAILQ_PREV(var, headname, field)) -+ -+/* -+ * Tail queue functions. -+ */ -+#define DWC_TAILQ_INIT(head) do { \ -+ (head)->tqh_first = NULL; \ -+ (head)->tqh_last = &(head)->tqh_first; \ -+} while (0) -+ -+#define DWC_TAILQ_INSERT_HEAD(head, elm, field) do { \ -+ if (((elm)->field.tqe_next = (head)->tqh_first) != NULL) \ -+ (head)->tqh_first->field.tqe_prev = \ -+ &(elm)->field.tqe_next; \ -+ else \ -+ (head)->tqh_last = &(elm)->field.tqe_next; \ -+ (head)->tqh_first = (elm); \ -+ (elm)->field.tqe_prev = &(head)->tqh_first; \ -+} while (0) -+ -+#define DWC_TAILQ_INSERT_TAIL(head, elm, field) do { \ -+ (elm)->field.tqe_next = NULL; \ -+ (elm)->field.tqe_prev = (head)->tqh_last; \ -+ *(head)->tqh_last = (elm); \ -+ (head)->tqh_last = &(elm)->field.tqe_next; \ -+} while (0) -+ -+#define DWC_TAILQ_INSERT_AFTER(head, listelm, elm, field) do { \ -+ if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\ -+ (elm)->field.tqe_next->field.tqe_prev = \ -+ &(elm)->field.tqe_next; \ -+ else \ -+ (head)->tqh_last = &(elm)->field.tqe_next; \ -+ (listelm)->field.tqe_next = (elm); \ -+ (elm)->field.tqe_prev = &(listelm)->field.tqe_next; \ -+} while (0) -+ -+#define DWC_TAILQ_INSERT_BEFORE(listelm, elm, field) do { \ -+ (elm)->field.tqe_prev = (listelm)->field.tqe_prev; \ -+ (elm)->field.tqe_next = (listelm); \ -+ *(listelm)->field.tqe_prev = (elm); \ -+ (listelm)->field.tqe_prev = &(elm)->field.tqe_next; \ -+} while (0) -+ -+#define DWC_TAILQ_REMOVE(head, elm, field) do { \ -+ if (((elm)->field.tqe_next) != NULL) \ -+ (elm)->field.tqe_next->field.tqe_prev = \ -+ (elm)->field.tqe_prev; \ -+ else \ -+ (head)->tqh_last = (elm)->field.tqe_prev; \ -+ *(elm)->field.tqe_prev = (elm)->field.tqe_next; \ -+} while (0) -+ -+#define DWC_TAILQ_REPLACE(head, elm, elm2, field) do { \ -+ if (((elm2)->field.tqe_next = (elm)->field.tqe_next) != NULL) \ -+ (elm2)->field.tqe_next->field.tqe_prev = \ -+ &(elm2)->field.tqe_next; \ -+ else \ -+ (head)->tqh_last = &(elm2)->field.tqe_next; \ -+ (elm2)->field.tqe_prev = (elm)->field.tqe_prev; \ -+ *(elm2)->field.tqe_prev = (elm2); \ -+} while (0) -+ -+/* -+ * Circular queue definitions. -+ */ -+#define DWC_CIRCLEQ_HEAD(name, type) \ -+struct name { \ -+ struct type *cqh_first; /* first element */ \ -+ struct type *cqh_last; /* last element */ \ -+} -+ -+#define DWC_CIRCLEQ_HEAD_INITIALIZER(head) \ -+ { DWC_CIRCLEQ_END(&head), DWC_CIRCLEQ_END(&head) } -+ -+#define DWC_CIRCLEQ_ENTRY(type) \ -+struct { \ -+ struct type *cqe_next; /* next element */ \ -+ struct type *cqe_prev; /* previous element */ \ -+} -+ -+/* -+ * Circular queue access methods -+ */ -+#define DWC_CIRCLEQ_FIRST(head) ((head)->cqh_first) -+#define DWC_CIRCLEQ_LAST(head) ((head)->cqh_last) -+#define DWC_CIRCLEQ_END(head) ((void *)(head)) -+#define DWC_CIRCLEQ_NEXT(elm, field) ((elm)->field.cqe_next) -+#define DWC_CIRCLEQ_PREV(elm, field) ((elm)->field.cqe_prev) -+#define DWC_CIRCLEQ_EMPTY(head) \ -+ (DWC_CIRCLEQ_FIRST(head) == DWC_CIRCLEQ_END(head)) -+ -+#define DWC_CIRCLEQ_EMPTY_ENTRY(elm, field) (((elm)->field.cqe_next == NULL) && ((elm)->field.cqe_prev == NULL)) -+ -+#define DWC_CIRCLEQ_FOREACH(var, head, field) \ -+ for((var) = DWC_CIRCLEQ_FIRST(head); \ -+ (var) != DWC_CIRCLEQ_END(head); \ -+ (var) = DWC_CIRCLEQ_NEXT(var, field)) -+ -+#define DWC_CIRCLEQ_FOREACH_SAFE(var, var2, head, field) \ -+ for((var) = DWC_CIRCLEQ_FIRST(head), var2 = DWC_CIRCLEQ_NEXT(var, field); \ -+ (var) != DWC_CIRCLEQ_END(head); \ -+ (var) = var2, var2 = DWC_CIRCLEQ_NEXT(var, field)) -+ -+#define DWC_CIRCLEQ_FOREACH_REVERSE(var, head, field) \ -+ for((var) = DWC_CIRCLEQ_LAST(head); \ -+ (var) != DWC_CIRCLEQ_END(head); \ -+ (var) = DWC_CIRCLEQ_PREV(var, field)) -+ -+/* -+ * Circular queue functions. -+ */ -+#define DWC_CIRCLEQ_INIT(head) do { \ -+ (head)->cqh_first = DWC_CIRCLEQ_END(head); \ -+ (head)->cqh_last = DWC_CIRCLEQ_END(head); \ -+} while (0) -+ -+#define DWC_CIRCLEQ_INIT_ENTRY(elm, field) do { \ -+ (elm)->field.cqe_next = NULL; \ -+ (elm)->field.cqe_prev = NULL; \ -+} while (0) -+ -+#define DWC_CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) do { \ -+ (elm)->field.cqe_next = (listelm)->field.cqe_next; \ -+ (elm)->field.cqe_prev = (listelm); \ -+ if ((listelm)->field.cqe_next == DWC_CIRCLEQ_END(head)) \ -+ (head)->cqh_last = (elm); \ -+ else \ -+ (listelm)->field.cqe_next->field.cqe_prev = (elm); \ -+ (listelm)->field.cqe_next = (elm); \ -+} while (0) -+ -+#define DWC_CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) do { \ -+ (elm)->field.cqe_next = (listelm); \ -+ (elm)->field.cqe_prev = (listelm)->field.cqe_prev; \ -+ if ((listelm)->field.cqe_prev == DWC_CIRCLEQ_END(head)) \ -+ (head)->cqh_first = (elm); \ -+ else \ -+ (listelm)->field.cqe_prev->field.cqe_next = (elm); \ -+ (listelm)->field.cqe_prev = (elm); \ -+} while (0) -+ -+#define DWC_CIRCLEQ_INSERT_HEAD(head, elm, field) do { \ -+ (elm)->field.cqe_next = (head)->cqh_first; \ -+ (elm)->field.cqe_prev = DWC_CIRCLEQ_END(head); \ -+ if ((head)->cqh_last == DWC_CIRCLEQ_END(head)) \ -+ (head)->cqh_last = (elm); \ -+ else \ -+ (head)->cqh_first->field.cqe_prev = (elm); \ -+ (head)->cqh_first = (elm); \ -+} while (0) -+ -+#define DWC_CIRCLEQ_INSERT_TAIL(head, elm, field) do { \ -+ (elm)->field.cqe_next = DWC_CIRCLEQ_END(head); \ -+ (elm)->field.cqe_prev = (head)->cqh_last; \ -+ if ((head)->cqh_first == DWC_CIRCLEQ_END(head)) \ -+ (head)->cqh_first = (elm); \ -+ else \ -+ (head)->cqh_last->field.cqe_next = (elm); \ -+ (head)->cqh_last = (elm); \ -+} while (0) -+ -+#define DWC_CIRCLEQ_REMOVE(head, elm, field) do { \ -+ if ((elm)->field.cqe_next == DWC_CIRCLEQ_END(head)) \ -+ (head)->cqh_last = (elm)->field.cqe_prev; \ -+ else \ -+ (elm)->field.cqe_next->field.cqe_prev = \ -+ (elm)->field.cqe_prev; \ -+ if ((elm)->field.cqe_prev == DWC_CIRCLEQ_END(head)) \ -+ (head)->cqh_first = (elm)->field.cqe_next; \ -+ else \ -+ (elm)->field.cqe_prev->field.cqe_next = \ -+ (elm)->field.cqe_next; \ -+} while (0) -+ -+#define DWC_CIRCLEQ_REMOVE_INIT(head, elm, field) do { \ -+ DWC_CIRCLEQ_REMOVE(head, elm, field); \ -+ DWC_CIRCLEQ_INIT_ENTRY(elm, field); \ -+} while (0) -+ -+#define DWC_CIRCLEQ_REPLACE(head, elm, elm2, field) do { \ -+ if (((elm2)->field.cqe_next = (elm)->field.cqe_next) == \ -+ DWC_CIRCLEQ_END(head)) \ -+ (head).cqh_last = (elm2); \ -+ else \ -+ (elm2)->field.cqe_next->field.cqe_prev = (elm2); \ -+ if (((elm2)->field.cqe_prev = (elm)->field.cqe_prev) == \ -+ DWC_CIRCLEQ_END(head)) \ -+ (head).cqh_first = (elm2); \ -+ else \ -+ (elm2)->field.cqe_prev->field.cqe_next = (elm2); \ -+} while (0) -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _DWC_LIST_H_ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_mem.c -@@ -0,0 +1,245 @@ -+/* Memory Debugging */ -+#ifdef DWC_DEBUG_MEMORY -+ -+#include "dwc_os.h" -+#include "dwc_list.h" -+ -+struct allocation { -+ void *addr; -+ void *ctx; -+ char *func; -+ int line; -+ uint32_t size; -+ int dma; -+ DWC_CIRCLEQ_ENTRY(allocation) entry; -+}; -+ -+DWC_CIRCLEQ_HEAD(allocation_queue, allocation); -+ -+struct allocation_manager { -+ void *mem_ctx; -+ struct allocation_queue allocations; -+ -+ /* statistics */ -+ int num; -+ int num_freed; -+ int num_active; -+ uint32_t total; -+ uint32_t cur; -+ uint32_t max; -+}; -+ -+static struct allocation_manager *manager = NULL; -+ -+static int add_allocation(void *ctx, uint32_t size, char const *func, int line, void *addr, -+ int dma) -+{ -+ struct allocation *a; -+ -+ DWC_ASSERT(manager != NULL, "manager not allocated"); -+ -+ a = __DWC_ALLOC_ATOMIC(manager->mem_ctx, sizeof(*a)); -+ if (!a) { -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ a->func = __DWC_ALLOC_ATOMIC(manager->mem_ctx, DWC_STRLEN(func) + 1); -+ if (!a->func) { -+ __DWC_FREE(manager->mem_ctx, a); -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ DWC_MEMCPY(a->func, func, DWC_STRLEN(func) + 1); -+ a->addr = addr; -+ a->ctx = ctx; -+ a->line = line; -+ a->size = size; -+ a->dma = dma; -+ DWC_CIRCLEQ_INSERT_TAIL(&manager->allocations, a, entry); -+ -+ /* Update stats */ -+ manager->num++; -+ manager->num_active++; -+ manager->total += size; -+ manager->cur += size; -+ -+ if (manager->max < manager->cur) { -+ manager->max = manager->cur; -+ } -+ -+ return 0; -+} -+ -+static struct allocation *find_allocation(void *ctx, void *addr) -+{ -+ struct allocation *a; -+ -+ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { -+ if (a->ctx == ctx && a->addr == addr) { -+ return a; -+ } -+ } -+ -+ return NULL; -+} -+ -+static void free_allocation(void *ctx, void *addr, char const *func, int line) -+{ -+ struct allocation *a = find_allocation(ctx, addr); -+ -+ if (!a) { -+ DWC_ASSERT(0, -+ "Free of address %p that was never allocated or already freed %s:%d", -+ addr, func, line); -+ return; -+ } -+ -+ DWC_CIRCLEQ_REMOVE(&manager->allocations, a, entry); -+ -+ manager->num_active--; -+ manager->num_freed++; -+ manager->cur -= a->size; -+ __DWC_FREE(manager->mem_ctx, a->func); -+ __DWC_FREE(manager->mem_ctx, a); -+} -+ -+int dwc_memory_debug_start(void *mem_ctx) -+{ -+ DWC_ASSERT(manager == NULL, "Memory debugging has already started\n"); -+ -+ if (manager) { -+ return -DWC_E_BUSY; -+ } -+ -+ manager = __DWC_ALLOC(mem_ctx, sizeof(*manager)); -+ if (!manager) { -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ DWC_CIRCLEQ_INIT(&manager->allocations); -+ manager->mem_ctx = mem_ctx; -+ manager->num = 0; -+ manager->num_freed = 0; -+ manager->num_active = 0; -+ manager->total = 0; -+ manager->cur = 0; -+ manager->max = 0; -+ -+ return 0; -+} -+ -+void dwc_memory_debug_stop(void) -+{ -+ struct allocation *a; -+ -+ dwc_memory_debug_report(); -+ -+ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { -+ DWC_ERROR("Memory leaked from %s:%d\n", a->func, a->line); -+ free_allocation(a->ctx, a->addr, NULL, -1); -+ } -+ -+ __DWC_FREE(manager->mem_ctx, manager); -+} -+ -+void dwc_memory_debug_report(void) -+{ -+ struct allocation *a; -+ -+ DWC_PRINTF("\n\n\n----------------- Memory Debugging Report -----------------\n\n"); -+ DWC_PRINTF("Num Allocations = %d\n", manager->num); -+ DWC_PRINTF("Freed = %d\n", manager->num_freed); -+ DWC_PRINTF("Active = %d\n", manager->num_active); -+ DWC_PRINTF("Current Memory Used = %d\n", manager->cur); -+ DWC_PRINTF("Total Memory Used = %d\n", manager->total); -+ DWC_PRINTF("Maximum Memory Used at Once = %d\n", manager->max); -+ DWC_PRINTF("Unfreed allocations:\n"); -+ -+ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { -+ DWC_PRINTF(" addr=%p, size=%d from %s:%d, DMA=%d\n", -+ a->addr, a->size, a->func, a->line, a->dma); -+ } -+} -+ -+/* The replacement functions */ -+void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line) -+{ -+ void *addr = __DWC_ALLOC(mem_ctx, size); -+ -+ if (!addr) { -+ return NULL; -+ } -+ -+ if (add_allocation(mem_ctx, size, func, line, addr, 0)) { -+ __DWC_FREE(mem_ctx, addr); -+ return NULL; -+ } -+ -+ return addr; -+} -+ -+void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func, -+ int line) -+{ -+ void *addr = __DWC_ALLOC_ATOMIC(mem_ctx, size); -+ -+ if (!addr) { -+ return NULL; -+ } -+ -+ if (add_allocation(mem_ctx, size, func, line, addr, 0)) { -+ __DWC_FREE(mem_ctx, addr); -+ return NULL; -+ } -+ -+ return addr; -+} -+ -+void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line) -+{ -+ free_allocation(mem_ctx, addr, func, line); -+ __DWC_FREE(mem_ctx, addr); -+} -+ -+void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr, -+ char const *func, int line) -+{ -+ void *addr = __DWC_DMA_ALLOC(dma_ctx, size, dma_addr); -+ -+ if (!addr) { -+ return NULL; -+ } -+ -+ if (add_allocation(dma_ctx, size, func, line, addr, 1)) { -+ __DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr); -+ return NULL; -+ } -+ -+ return addr; -+} -+ -+void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size, -+ dwc_dma_t *dma_addr, char const *func, int line) -+{ -+ void *addr = __DWC_DMA_ALLOC_ATOMIC(dma_ctx, size, dma_addr); -+ -+ if (!addr) { -+ return NULL; -+ } -+ -+ if (add_allocation(dma_ctx, size, func, line, addr, 1)) { -+ __DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr); -+ return NULL; -+ } -+ -+ return addr; -+} -+ -+void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr, -+ dwc_dma_t dma_addr, char const *func, int line) -+{ -+ free_allocation(dma_ctx, virt_addr, func, line); -+ __DWC_DMA_FREE(dma_ctx, size, virt_addr, dma_addr); -+} -+ -+#endif /* DWC_DEBUG_MEMORY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_modpow.c -@@ -0,0 +1,636 @@ -+/* Bignum routines adapted from PUTTY sources. PuTTY copyright notice follows. -+ * -+ * PuTTY is copyright 1997-2007 Simon Tatham. -+ * -+ * Portions copyright Robert de Bath, Joris van Rantwijk, Delian -+ * Delchev, Andreas Schultz, Jeroen Massar, Wez Furlong, Nicolas Barry, -+ * Justin Bradford, Ben Harris, Malcolm Smith, Ahmad Khalifa, Markus -+ * Kuhn, and CORE SDI S.A. -+ * -+ * Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation files -+ * (the "Software"), to deal in the Software without restriction, -+ * including without limitation the rights to use, copy, modify, merge, -+ * publish, distribute, sublicense, and/or sell copies of the Software, -+ * and to permit persons to whom the Software is furnished to do so, -+ * subject to the following conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF -+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE -+ * FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF -+ * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION -+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -+ * -+ */ -+#ifdef DWC_CRYPTOLIB -+ -+#ifndef CONFIG_MACH_IPMATE -+ -+#include "dwc_modpow.h" -+ -+#define BIGNUM_INT_MASK 0xFFFFFFFFUL -+#define BIGNUM_TOP_BIT 0x80000000UL -+#define BIGNUM_INT_BITS 32 -+ -+ -+static void *snmalloc(void *mem_ctx, size_t n, size_t size) -+{ -+ void *p; -+ size *= n; -+ if (size == 0) size = 1; -+ p = dwc_alloc(mem_ctx, size); -+ return p; -+} -+ -+#define snewn(ctx, n, type) ((type *)snmalloc((ctx), (n), sizeof(type))) -+#define sfree dwc_free -+ -+/* -+ * Usage notes: -+ * * Do not call the DIVMOD_WORD macro with expressions such as array -+ * subscripts, as some implementations object to this (see below). -+ * * Note that none of the division methods below will cope if the -+ * quotient won't fit into BIGNUM_INT_BITS. Callers should be careful -+ * to avoid this case. -+ * If this condition occurs, in the case of the x86 DIV instruction, -+ * an overflow exception will occur, which (according to a correspondent) -+ * will manifest on Windows as something like -+ * 0xC0000095: Integer overflow -+ * The C variant won't give the right answer, either. -+ */ -+ -+#define MUL_WORD(w1, w2) ((BignumDblInt)w1 * w2) -+ -+#if defined __GNUC__ && defined __i386__ -+#define DIVMOD_WORD(q, r, hi, lo, w) \ -+ __asm__("div %2" : \ -+ "=d" (r), "=a" (q) : \ -+ "r" (w), "d" (hi), "a" (lo)) -+#else -+#define DIVMOD_WORD(q, r, hi, lo, w) do { \ -+ BignumDblInt n = (((BignumDblInt)hi) << BIGNUM_INT_BITS) | lo; \ -+ q = n / w; \ -+ r = n % w; \ -+} while (0) -+#endif -+ -+// q = n / w; -+// r = n % w; -+ -+#define BIGNUM_INT_BYTES (BIGNUM_INT_BITS / 8) -+ -+#define BIGNUM_INTERNAL -+ -+static Bignum newbn(void *mem_ctx, int length) -+{ -+ Bignum b = snewn(mem_ctx, length + 1, BignumInt); -+ //if (!b) -+ //abort(); /* FIXME */ -+ DWC_MEMSET(b, 0, (length + 1) * sizeof(*b)); -+ b[0] = length; -+ return b; -+} -+ -+void freebn(void *mem_ctx, Bignum b) -+{ -+ /* -+ * Burn the evidence, just in case. -+ */ -+ DWC_MEMSET(b, 0, sizeof(b[0]) * (b[0] + 1)); -+ sfree(mem_ctx, b); -+} -+ -+/* -+ * Compute c = a * b. -+ * Input is in the first len words of a and b. -+ * Result is returned in the first 2*len words of c. -+ */ -+static void internal_mul(BignumInt *a, BignumInt *b, -+ BignumInt *c, int len) -+{ -+ int i, j; -+ BignumDblInt t; -+ -+ for (j = 0; j < 2 * len; j++) -+ c[j] = 0; -+ -+ for (i = len - 1; i >= 0; i--) { -+ t = 0; -+ for (j = len - 1; j >= 0; j--) { -+ t += MUL_WORD(a[i], (BignumDblInt) b[j]); -+ t += (BignumDblInt) c[i + j + 1]; -+ c[i + j + 1] = (BignumInt) t; -+ t = t >> BIGNUM_INT_BITS; -+ } -+ c[i] = (BignumInt) t; -+ } -+} -+ -+static void internal_add_shifted(BignumInt *number, -+ unsigned n, int shift) -+{ -+ int word = 1 + (shift / BIGNUM_INT_BITS); -+ int bshift = shift % BIGNUM_INT_BITS; -+ BignumDblInt addend; -+ -+ addend = (BignumDblInt)n << bshift; -+ -+ while (addend) { -+ addend += number[word]; -+ number[word] = (BignumInt) addend & BIGNUM_INT_MASK; -+ addend >>= BIGNUM_INT_BITS; -+ word++; -+ } -+} -+ -+/* -+ * Compute a = a % m. -+ * Input in first alen words of a and first mlen words of m. -+ * Output in first alen words of a -+ * (of which first alen-mlen words will be zero). -+ * The MSW of m MUST have its high bit set. -+ * Quotient is accumulated in the `quotient' array, which is a Bignum -+ * rather than the internal bigendian format. Quotient parts are shifted -+ * left by `qshift' before adding into quot. -+ */ -+static void internal_mod(BignumInt *a, int alen, -+ BignumInt *m, int mlen, -+ BignumInt *quot, int qshift) -+{ -+ BignumInt m0, m1; -+ unsigned int h; -+ int i, k; -+ -+ m0 = m[0]; -+ if (mlen > 1) -+ m1 = m[1]; -+ else -+ m1 = 0; -+ -+ for (i = 0; i <= alen - mlen; i++) { -+ BignumDblInt t; -+ unsigned int q, r, c, ai1; -+ -+ if (i == 0) { -+ h = 0; -+ } else { -+ h = a[i - 1]; -+ a[i - 1] = 0; -+ } -+ -+ if (i == alen - 1) -+ ai1 = 0; -+ else -+ ai1 = a[i + 1]; -+ -+ /* Find q = h:a[i] / m0 */ -+ if (h >= m0) { -+ /* -+ * Special case. -+ * -+ * To illustrate it, suppose a BignumInt is 8 bits, and -+ * we are dividing (say) A1:23:45:67 by A1:B2:C3. Then -+ * our initial division will be 0xA123 / 0xA1, which -+ * will give a quotient of 0x100 and a divide overflow. -+ * However, the invariants in this division algorithm -+ * are not violated, since the full number A1:23:... is -+ * _less_ than the quotient prefix A1:B2:... and so the -+ * following correction loop would have sorted it out. -+ * -+ * In this situation we set q to be the largest -+ * quotient we _can_ stomach (0xFF, of course). -+ */ -+ q = BIGNUM_INT_MASK; -+ } else { -+ /* Macro doesn't want an array subscript expression passed -+ * into it (see definition), so use a temporary. */ -+ BignumInt tmplo = a[i]; -+ DIVMOD_WORD(q, r, h, tmplo, m0); -+ -+ /* Refine our estimate of q by looking at -+ h:a[i]:a[i+1] / m0:m1 */ -+ t = MUL_WORD(m1, q); -+ if (t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) { -+ q--; -+ t -= m1; -+ r = (r + m0) & BIGNUM_INT_MASK; /* overflow? */ -+ if (r >= (BignumDblInt) m0 && -+ t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) q--; -+ } -+ } -+ -+ /* Subtract q * m from a[i...] */ -+ c = 0; -+ for (k = mlen - 1; k >= 0; k--) { -+ t = MUL_WORD(q, m[k]); -+ t += c; -+ c = (unsigned)(t >> BIGNUM_INT_BITS); -+ if ((BignumInt) t > a[i + k]) -+ c++; -+ a[i + k] -= (BignumInt) t; -+ } -+ -+ /* Add back m in case of borrow */ -+ if (c != h) { -+ t = 0; -+ for (k = mlen - 1; k >= 0; k--) { -+ t += m[k]; -+ t += a[i + k]; -+ a[i + k] = (BignumInt) t; -+ t = t >> BIGNUM_INT_BITS; -+ } -+ q--; -+ } -+ if (quot) -+ internal_add_shifted(quot, q, qshift + BIGNUM_INT_BITS * (alen - mlen - i)); -+ } -+} -+ -+/* -+ * Compute p % mod. -+ * The most significant word of mod MUST be non-zero. -+ * We assume that the result array is the same size as the mod array. -+ * We optionally write out a quotient if `quotient' is non-NULL. -+ * We can avoid writing out the result if `result' is NULL. -+ */ -+void bigdivmod(void *mem_ctx, Bignum p, Bignum mod, Bignum result, Bignum quotient) -+{ -+ BignumInt *n, *m; -+ int mshift; -+ int plen, mlen, i, j; -+ -+ /* Allocate m of size mlen, copy mod to m */ -+ /* We use big endian internally */ -+ mlen = mod[0]; -+ m = snewn(mem_ctx, mlen, BignumInt); -+ //if (!m) -+ //abort(); /* FIXME */ -+ for (j = 0; j < mlen; j++) -+ m[j] = mod[mod[0] - j]; -+ -+ /* Shift m left to make msb bit set */ -+ for (mshift = 0; mshift < BIGNUM_INT_BITS-1; mshift++) -+ if ((m[0] << mshift) & BIGNUM_TOP_BIT) -+ break; -+ if (mshift) { -+ for (i = 0; i < mlen - 1; i++) -+ m[i] = (m[i] << mshift) | (m[i + 1] >> (BIGNUM_INT_BITS - mshift)); -+ m[mlen - 1] = m[mlen - 1] << mshift; -+ } -+ -+ plen = p[0]; -+ /* Ensure plen > mlen */ -+ if (plen <= mlen) -+ plen = mlen + 1; -+ -+ /* Allocate n of size plen, copy p to n */ -+ n = snewn(mem_ctx, plen, BignumInt); -+ //if (!n) -+ //abort(); /* FIXME */ -+ for (j = 0; j < plen; j++) -+ n[j] = 0; -+ for (j = 1; j <= (int)p[0]; j++) -+ n[plen - j] = p[j]; -+ -+ /* Main computation */ -+ internal_mod(n, plen, m, mlen, quotient, mshift); -+ -+ /* Fixup result in case the modulus was shifted */ -+ if (mshift) { -+ for (i = plen - mlen - 1; i < plen - 1; i++) -+ n[i] = (n[i] << mshift) | (n[i + 1] >> (BIGNUM_INT_BITS - mshift)); -+ n[plen - 1] = n[plen - 1] << mshift; -+ internal_mod(n, plen, m, mlen, quotient, 0); -+ for (i = plen - 1; i >= plen - mlen; i--) -+ n[i] = (n[i] >> mshift) | (n[i - 1] << (BIGNUM_INT_BITS - mshift)); -+ } -+ -+ /* Copy result to buffer */ -+ if (result) { -+ for (i = 1; i <= (int)result[0]; i++) { -+ int j = plen - i; -+ result[i] = j >= 0 ? n[j] : 0; -+ } -+ } -+ -+ /* Free temporary arrays */ -+ for (i = 0; i < mlen; i++) -+ m[i] = 0; -+ sfree(mem_ctx, m); -+ for (i = 0; i < plen; i++) -+ n[i] = 0; -+ sfree(mem_ctx, n); -+} -+ -+/* -+ * Simple remainder. -+ */ -+Bignum bigmod(void *mem_ctx, Bignum a, Bignum b) -+{ -+ Bignum r = newbn(mem_ctx, b[0]); -+ bigdivmod(mem_ctx, a, b, r, NULL); -+ return r; -+} -+ -+/* -+ * Compute (base ^ exp) % mod. -+ */ -+Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod) -+{ -+ BignumInt *a, *b, *n, *m; -+ int mshift; -+ int mlen, i, j; -+ Bignum base, result; -+ -+ /* -+ * The most significant word of mod needs to be non-zero. It -+ * should already be, but let's make sure. -+ */ -+ //assert(mod[mod[0]] != 0); -+ -+ /* -+ * Make sure the base is smaller than the modulus, by reducing -+ * it modulo the modulus if not. -+ */ -+ base = bigmod(mem_ctx, base_in, mod); -+ -+ /* Allocate m of size mlen, copy mod to m */ -+ /* We use big endian internally */ -+ mlen = mod[0]; -+ m = snewn(mem_ctx, mlen, BignumInt); -+ //if (!m) -+ //abort(); /* FIXME */ -+ for (j = 0; j < mlen; j++) -+ m[j] = mod[mod[0] - j]; -+ -+ /* Shift m left to make msb bit set */ -+ for (mshift = 0; mshift < BIGNUM_INT_BITS - 1; mshift++) -+ if ((m[0] << mshift) & BIGNUM_TOP_BIT) -+ break; -+ if (mshift) { -+ for (i = 0; i < mlen - 1; i++) -+ m[i] = -+ (m[i] << mshift) | (m[i + 1] >> -+ (BIGNUM_INT_BITS - mshift)); -+ m[mlen - 1] = m[mlen - 1] << mshift; -+ } -+ -+ /* Allocate n of size mlen, copy base to n */ -+ n = snewn(mem_ctx, mlen, BignumInt); -+ //if (!n) -+ //abort(); /* FIXME */ -+ i = mlen - base[0]; -+ for (j = 0; j < i; j++) -+ n[j] = 0; -+ for (j = 0; j < base[0]; j++) -+ n[i + j] = base[base[0] - j]; -+ -+ /* Allocate a and b of size 2*mlen. Set a = 1 */ -+ a = snewn(mem_ctx, 2 * mlen, BignumInt); -+ //if (!a) -+ //abort(); /* FIXME */ -+ b = snewn(mem_ctx, 2 * mlen, BignumInt); -+ //if (!b) -+ //abort(); /* FIXME */ -+ for (i = 0; i < 2 * mlen; i++) -+ a[i] = 0; -+ a[2 * mlen - 1] = 1; -+ -+ /* Skip leading zero bits of exp. */ -+ i = 0; -+ j = BIGNUM_INT_BITS - 1; -+ while (i < exp[0] && (exp[exp[0] - i] & (1 << j)) == 0) { -+ j--; -+ if (j < 0) { -+ i++; -+ j = BIGNUM_INT_BITS - 1; -+ } -+ } -+ -+ /* Main computation */ -+ while (i < exp[0]) { -+ while (j >= 0) { -+ internal_mul(a + mlen, a + mlen, b, mlen); -+ internal_mod(b, mlen * 2, m, mlen, NULL, 0); -+ if ((exp[exp[0] - i] & (1 << j)) != 0) { -+ internal_mul(b + mlen, n, a, mlen); -+ internal_mod(a, mlen * 2, m, mlen, NULL, 0); -+ } else { -+ BignumInt *t; -+ t = a; -+ a = b; -+ b = t; -+ } -+ j--; -+ } -+ i++; -+ j = BIGNUM_INT_BITS - 1; -+ } -+ -+ /* Fixup result in case the modulus was shifted */ -+ if (mshift) { -+ for (i = mlen - 1; i < 2 * mlen - 1; i++) -+ a[i] = -+ (a[i] << mshift) | (a[i + 1] >> -+ (BIGNUM_INT_BITS - mshift)); -+ a[2 * mlen - 1] = a[2 * mlen - 1] << mshift; -+ internal_mod(a, mlen * 2, m, mlen, NULL, 0); -+ for (i = 2 * mlen - 1; i >= mlen; i--) -+ a[i] = -+ (a[i] >> mshift) | (a[i - 1] << -+ (BIGNUM_INT_BITS - mshift)); -+ } -+ -+ /* Copy result to buffer */ -+ result = newbn(mem_ctx, mod[0]); -+ for (i = 0; i < mlen; i++) -+ result[result[0] - i] = a[i + mlen]; -+ while (result[0] > 1 && result[result[0]] == 0) -+ result[0]--; -+ -+ /* Free temporary arrays */ -+ for (i = 0; i < 2 * mlen; i++) -+ a[i] = 0; -+ sfree(mem_ctx, a); -+ for (i = 0; i < 2 * mlen; i++) -+ b[i] = 0; -+ sfree(mem_ctx, b); -+ for (i = 0; i < mlen; i++) -+ m[i] = 0; -+ sfree(mem_ctx, m); -+ for (i = 0; i < mlen; i++) -+ n[i] = 0; -+ sfree(mem_ctx, n); -+ -+ freebn(mem_ctx, base); -+ -+ return result; -+} -+ -+ -+#ifdef UNITTEST -+ -+static __u32 dh_p[] = { -+ 96, -+ 0xFFFFFFFF, -+ 0xFFFFFFFF, -+ 0xA93AD2CA, -+ 0x4B82D120, -+ 0xE0FD108E, -+ 0x43DB5BFC, -+ 0x74E5AB31, -+ 0x08E24FA0, -+ 0xBAD946E2, -+ 0x770988C0, -+ 0x7A615D6C, -+ 0xBBE11757, -+ 0x177B200C, -+ 0x521F2B18, -+ 0x3EC86A64, -+ 0xD8760273, -+ 0xD98A0864, -+ 0xF12FFA06, -+ 0x1AD2EE6B, -+ 0xCEE3D226, -+ 0x4A25619D, -+ 0x1E8C94E0, -+ 0xDB0933D7, -+ 0xABF5AE8C, -+ 0xA6E1E4C7, -+ 0xB3970F85, -+ 0x5D060C7D, -+ 0x8AEA7157, -+ 0x58DBEF0A, -+ 0xECFB8504, -+ 0xDF1CBA64, -+ 0xA85521AB, -+ 0x04507A33, -+ 0xAD33170D, -+ 0x8AAAC42D, -+ 0x15728E5A, -+ 0x98FA0510, -+ 0x15D22618, -+ 0xEA956AE5, -+ 0x3995497C, -+ 0x95581718, -+ 0xDE2BCBF6, -+ 0x6F4C52C9, -+ 0xB5C55DF0, -+ 0xEC07A28F, -+ 0x9B2783A2, -+ 0x180E8603, -+ 0xE39E772C, -+ 0x2E36CE3B, -+ 0x32905E46, -+ 0xCA18217C, -+ 0xF1746C08, -+ 0x4ABC9804, -+ 0x670C354E, -+ 0x7096966D, -+ 0x9ED52907, -+ 0x208552BB, -+ 0x1C62F356, -+ 0xDCA3AD96, -+ 0x83655D23, -+ 0xFD24CF5F, -+ 0x69163FA8, -+ 0x1C55D39A, -+ 0x98DA4836, -+ 0xA163BF05, -+ 0xC2007CB8, -+ 0xECE45B3D, -+ 0x49286651, -+ 0x7C4B1FE6, -+ 0xAE9F2411, -+ 0x5A899FA5, -+ 0xEE386BFB, -+ 0xF406B7ED, -+ 0x0BFF5CB6, -+ 0xA637ED6B, -+ 0xF44C42E9, -+ 0x625E7EC6, -+ 0xE485B576, -+ 0x6D51C245, -+ 0x4FE1356D, -+ 0xF25F1437, -+ 0x302B0A6D, -+ 0xCD3A431B, -+ 0xEF9519B3, -+ 0x8E3404DD, -+ 0x514A0879, -+ 0x3B139B22, -+ 0x020BBEA6, -+ 0x8A67CC74, -+ 0x29024E08, -+ 0x80DC1CD1, -+ 0xC4C6628B, -+ 0x2168C234, -+ 0xC90FDAA2, -+ 0xFFFFFFFF, -+ 0xFFFFFFFF, -+}; -+ -+static __u32 dh_a[] = { -+ 8, -+ 0xdf367516, -+ 0x86459caa, -+ 0xe2d459a4, -+ 0xd910dae0, -+ 0x8a8b5e37, -+ 0x67ab31c6, -+ 0xf0b55ea9, -+ 0x440051d6, -+}; -+ -+static __u32 dh_b[] = { -+ 8, -+ 0xded92656, -+ 0xe07a048a, -+ 0x6fa452cd, -+ 0x2df89d30, -+ 0xc75f1b0f, -+ 0x8ce3578f, -+ 0x7980a324, -+ 0x5daec786, -+}; -+ -+static __u32 dh_g[] = { -+ 1, -+ 2, -+}; -+ -+int main(void) -+{ -+ int i; -+ __u32 *k; -+ k = dwc_modpow(NULL, dh_g, dh_a, dh_p); -+ -+ printf("\n\n"); -+ for (i=0; i> 16; -+ printf("%04x %04x ", m, l); -+ if (!((i + 1)%13)) printf("\n"); -+ } -+ printf("\n\n"); -+ -+ if ((k[0] == 0x60) && (k[1] == 0x28e490e5) && (k[0x60] == 0x5a0d3d4e)) { -+ printf("PASS\n\n"); -+ } -+ else { -+ printf("FAIL\n\n"); -+ } -+ -+} -+ -+#endif /* UNITTEST */ -+ -+#endif /* CONFIG_MACH_IPMATE */ -+ -+#endif /*DWC_CRYPTOLIB */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_modpow.h -@@ -0,0 +1,34 @@ -+/* -+ * dwc_modpow.h -+ * See dwc_modpow.c for license and changes -+ */ -+#ifndef _DWC_MODPOW_H -+#define _DWC_MODPOW_H -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#include "dwc_os.h" -+ -+/** @file -+ * -+ * This file defines the module exponentiation function which is only used -+ * internally by the DWC UWB modules for calculation of PKs during numeric -+ * association. The routine is taken from the PUTTY, an open source terminal -+ * emulator. The PUTTY License is preserved in the dwc_modpow.c file. -+ * -+ */ -+ -+typedef uint32_t BignumInt; -+typedef uint64_t BignumDblInt; -+typedef BignumInt *Bignum; -+ -+/* Compute modular exponentiaion */ -+extern Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod); -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _LINUX_BIGNUM_H */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_notifier.c -@@ -0,0 +1,319 @@ -+#ifdef DWC_NOTIFYLIB -+ -+#include "dwc_notifier.h" -+#include "dwc_list.h" -+ -+typedef struct dwc_observer { -+ void *observer; -+ dwc_notifier_callback_t callback; -+ void *data; -+ char *notification; -+ DWC_CIRCLEQ_ENTRY(dwc_observer) list_entry; -+} observer_t; -+ -+DWC_CIRCLEQ_HEAD(observer_queue, dwc_observer); -+ -+typedef struct dwc_notifier { -+ void *mem_ctx; -+ void *object; -+ struct observer_queue observers; -+ DWC_CIRCLEQ_ENTRY(dwc_notifier) list_entry; -+} notifier_t; -+ -+DWC_CIRCLEQ_HEAD(notifier_queue, dwc_notifier); -+ -+typedef struct manager { -+ void *mem_ctx; -+ void *wkq_ctx; -+ dwc_workq_t *wq; -+// dwc_mutex_t *mutex; -+ struct notifier_queue notifiers; -+} manager_t; -+ -+static manager_t *manager = NULL; -+ -+static int create_manager(void *mem_ctx, void *wkq_ctx) -+{ -+ manager = dwc_alloc(mem_ctx, sizeof(manager_t)); -+ if (!manager) { -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ DWC_CIRCLEQ_INIT(&manager->notifiers); -+ -+ manager->wq = dwc_workq_alloc(wkq_ctx, "DWC Notification WorkQ"); -+ if (!manager->wq) { -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ return 0; -+} -+ -+static void free_manager(void) -+{ -+ dwc_workq_free(manager->wq); -+ -+ /* All notifiers must have unregistered themselves before this module -+ * can be removed. Hitting this assertion indicates a programmer -+ * error. */ -+ DWC_ASSERT(DWC_CIRCLEQ_EMPTY(&manager->notifiers), -+ "Notification manager being freed before all notifiers have been removed"); -+ dwc_free(manager->mem_ctx, manager); -+} -+ -+#ifdef DEBUG -+static void dump_manager(void) -+{ -+ notifier_t *n; -+ observer_t *o; -+ -+ DWC_ASSERT(manager, "Notification manager not found"); -+ -+ DWC_DEBUG("List of all notifiers and observers:\n"); -+ DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) { -+ DWC_DEBUG("Notifier %p has observers:\n", n->object); -+ DWC_CIRCLEQ_FOREACH(o, &n->observers, list_entry) { -+ DWC_DEBUG(" %p watching %s\n", o->observer, o->notification); -+ } -+ } -+} -+#else -+#define dump_manager(...) -+#endif -+ -+static observer_t *alloc_observer(void *mem_ctx, void *observer, char *notification, -+ dwc_notifier_callback_t callback, void *data) -+{ -+ observer_t *new_observer = dwc_alloc(mem_ctx, sizeof(observer_t)); -+ -+ if (!new_observer) { -+ return NULL; -+ } -+ -+ DWC_CIRCLEQ_INIT_ENTRY(new_observer, list_entry); -+ new_observer->observer = observer; -+ new_observer->notification = notification; -+ new_observer->callback = callback; -+ new_observer->data = data; -+ return new_observer; -+} -+ -+static void free_observer(void *mem_ctx, observer_t *observer) -+{ -+ dwc_free(mem_ctx, observer); -+} -+ -+static notifier_t *alloc_notifier(void *mem_ctx, void *object) -+{ -+ notifier_t *notifier; -+ -+ if (!object) { -+ return NULL; -+ } -+ -+ notifier = dwc_alloc(mem_ctx, sizeof(notifier_t)); -+ if (!notifier) { -+ return NULL; -+ } -+ -+ DWC_CIRCLEQ_INIT(¬ifier->observers); -+ DWC_CIRCLEQ_INIT_ENTRY(notifier, list_entry); -+ -+ notifier->mem_ctx = mem_ctx; -+ notifier->object = object; -+ return notifier; -+} -+ -+static void free_notifier(notifier_t *notifier) -+{ -+ observer_t *observer; -+ -+ DWC_CIRCLEQ_FOREACH(observer, ¬ifier->observers, list_entry) { -+ free_observer(notifier->mem_ctx, observer); -+ } -+ -+ dwc_free(notifier->mem_ctx, notifier); -+} -+ -+static notifier_t *find_notifier(void *object) -+{ -+ notifier_t *notifier; -+ -+ DWC_ASSERT(manager, "Notification manager not found"); -+ -+ if (!object) { -+ return NULL; -+ } -+ -+ DWC_CIRCLEQ_FOREACH(notifier, &manager->notifiers, list_entry) { -+ if (notifier->object == object) { -+ return notifier; -+ } -+ } -+ -+ return NULL; -+} -+ -+int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx) -+{ -+ return create_manager(mem_ctx, wkq_ctx); -+} -+ -+void dwc_free_notification_manager(void) -+{ -+ free_manager(); -+} -+ -+dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object) -+{ -+ notifier_t *notifier; -+ -+ DWC_ASSERT(manager, "Notification manager not found"); -+ -+ notifier = find_notifier(object); -+ if (notifier) { -+ DWC_ERROR("Notifier %p is already registered\n", object); -+ return NULL; -+ } -+ -+ notifier = alloc_notifier(mem_ctx, object); -+ if (!notifier) { -+ return NULL; -+ } -+ -+ DWC_CIRCLEQ_INSERT_TAIL(&manager->notifiers, notifier, list_entry); -+ -+ DWC_INFO("Notifier %p registered", object); -+ dump_manager(); -+ -+ return notifier; -+} -+ -+void dwc_unregister_notifier(dwc_notifier_t *notifier) -+{ -+ DWC_ASSERT(manager, "Notification manager not found"); -+ -+ if (!DWC_CIRCLEQ_EMPTY(¬ifier->observers)) { -+ observer_t *o; -+ -+ DWC_ERROR("Notifier %p has active observers when removing\n", notifier->object); -+ DWC_CIRCLEQ_FOREACH(o, ¬ifier->observers, list_entry) { -+ DWC_DEBUGC(" %p watching %s\n", o->observer, o->notification); -+ } -+ -+ DWC_ASSERT(DWC_CIRCLEQ_EMPTY(¬ifier->observers), -+ "Notifier %p has active observers when removing", notifier); -+ } -+ -+ DWC_CIRCLEQ_REMOVE_INIT(&manager->notifiers, notifier, list_entry); -+ free_notifier(notifier); -+ -+ DWC_INFO("Notifier unregistered"); -+ dump_manager(); -+} -+ -+/* Add an observer to observe the notifier for a particular state, event, or notification. */ -+int dwc_add_observer(void *observer, void *object, char *notification, -+ dwc_notifier_callback_t callback, void *data) -+{ -+ notifier_t *notifier = find_notifier(object); -+ observer_t *new_observer; -+ -+ if (!notifier) { -+ DWC_ERROR("Notifier %p is not found when adding observer\n", object); -+ return -DWC_E_INVALID; -+ } -+ -+ new_observer = alloc_observer(notifier->mem_ctx, observer, notification, callback, data); -+ if (!new_observer) { -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ DWC_CIRCLEQ_INSERT_TAIL(¬ifier->observers, new_observer, list_entry); -+ -+ DWC_INFO("Added observer %p to notifier %p observing notification %s, callback=%p, data=%p", -+ observer, object, notification, callback, data); -+ -+ dump_manager(); -+ return 0; -+} -+ -+int dwc_remove_observer(void *observer) -+{ -+ notifier_t *n; -+ -+ DWC_ASSERT(manager, "Notification manager not found"); -+ -+ DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) { -+ observer_t *o; -+ observer_t *o2; -+ -+ DWC_CIRCLEQ_FOREACH_SAFE(o, o2, &n->observers, list_entry) { -+ if (o->observer == observer) { -+ DWC_CIRCLEQ_REMOVE_INIT(&n->observers, o, list_entry); -+ DWC_INFO("Removing observer %p from notifier %p watching notification %s:", -+ o->observer, n->object, o->notification); -+ free_observer(n->mem_ctx, o); -+ } -+ } -+ } -+ -+ dump_manager(); -+ return 0; -+} -+ -+typedef struct callback_data { -+ void *mem_ctx; -+ dwc_notifier_callback_t cb; -+ void *observer; -+ void *data; -+ void *object; -+ char *notification; -+ void *notification_data; -+} cb_data_t; -+ -+static void cb_task(void *data) -+{ -+ cb_data_t *cb = (cb_data_t *)data; -+ -+ cb->cb(cb->object, cb->notification, cb->observer, cb->notification_data, cb->data); -+ dwc_free(cb->mem_ctx, cb); -+} -+ -+void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data) -+{ -+ observer_t *o; -+ -+ DWC_ASSERT(manager, "Notification manager not found"); -+ -+ DWC_CIRCLEQ_FOREACH(o, ¬ifier->observers, list_entry) { -+ int len = DWC_STRLEN(notification); -+ -+ if (DWC_STRLEN(o->notification) != len) { -+ continue; -+ } -+ -+ if (DWC_STRNCMP(o->notification, notification, len) == 0) { -+ cb_data_t *cb_data = dwc_alloc(notifier->mem_ctx, sizeof(cb_data_t)); -+ -+ if (!cb_data) { -+ DWC_ERROR("Failed to allocate callback data\n"); -+ return; -+ } -+ -+ cb_data->mem_ctx = notifier->mem_ctx; -+ cb_data->cb = o->callback; -+ cb_data->observer = o->observer; -+ cb_data->data = o->data; -+ cb_data->object = notifier->object; -+ cb_data->notification = notification; -+ cb_data->notification_data = notification_data; -+ DWC_DEBUGC("Observer found %p for notification %s\n", o->observer, notification); -+ DWC_WORKQ_SCHEDULE(manager->wq, cb_task, cb_data, -+ "Notify callback from %p for Notification %s, to observer %p", -+ cb_data->object, notification, cb_data->observer); -+ } -+ } -+} -+ -+#endif /* DWC_NOTIFYLIB */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_notifier.h -@@ -0,0 +1,122 @@ -+ -+#ifndef __DWC_NOTIFIER_H__ -+#define __DWC_NOTIFIER_H__ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#include "dwc_os.h" -+ -+/** @file -+ * -+ * A simple implementation of the Observer pattern. Any "module" can -+ * register as an observer or notifier. The notion of "module" is abstract and -+ * can mean anything used to identify either an observer or notifier. Usually -+ * it will be a pointer to a data structure which contains some state, ie an -+ * object. -+ * -+ * Before any notifiers can be added, the global notification manager must be -+ * brought up with dwc_alloc_notification_manager(). -+ * dwc_free_notification_manager() will bring it down and free all resources. -+ * These would typically be called upon module load and unload. The -+ * notification manager is a single global instance that handles all registered -+ * observable modules and observers so this should be done only once. -+ * -+ * A module can be observable by using Notifications to publicize some general -+ * information about it's state or operation. It does not care who listens, or -+ * even if anyone listens, or what they do with the information. The observable -+ * modules do not need to know any information about it's observers or their -+ * interface, or their state or data. -+ * -+ * Any module can register to emit Notifications. It should publish a list of -+ * notifications that it can emit and their behavior, such as when they will get -+ * triggered, and what information will be provided to the observer. Then it -+ * should register itself as an observable module. See dwc_register_notifier(). -+ * -+ * Any module can observe any observable, registered module, provided it has a -+ * handle to the other module and knows what notifications to observe. See -+ * dwc_add_observer(). -+ * -+ * A function of type dwc_notifier_callback_t is called whenever a notification -+ * is triggered with one or more observers observing it. This function is -+ * called in it's own process so it may sleep or block if needed. It is -+ * guaranteed to be called sometime after the notification has occurred and will -+ * be called once per each time the notification is triggered. It will NOT be -+ * called in the same process context used to trigger the notification. -+ * -+ * @section Limitiations -+ * -+ * Keep in mind that Notifications that can be triggered in rapid sucession may -+ * schedule too many processes too handle. Be aware of this limitation when -+ * designing to use notifications, and only add notifications for appropriate -+ * observable information. -+ * -+ * Also Notification callbacks are not synchronous. If you need to synchronize -+ * the behavior between module/observer you must use other means. And perhaps -+ * that will mean Notifications are not the proper solution. -+ */ -+ -+struct dwc_notifier; -+typedef struct dwc_notifier dwc_notifier_t; -+ -+/** The callback function must be of this type. -+ * -+ * @param object This is the object that is being observed. -+ * @param notification This is the notification that was triggered. -+ * @param observer This is the observer -+ * @param notification_data This is notification-specific data that the notifier -+ * has included in this notification. The value of this should be published in -+ * the documentation of the observable module with the notifications. -+ * @param user_data This is any custom data that the observer provided when -+ * adding itself as an observer to the notification. */ -+typedef void (*dwc_notifier_callback_t)(void *object, char *notification, void *observer, -+ void *notification_data, void *user_data); -+ -+/** Brings up the notification manager. */ -+extern int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx); -+/** Brings down the notification manager. */ -+extern void dwc_free_notification_manager(void); -+ -+/** This function registers an observable module. A dwc_notifier_t object is -+ * returned to the observable module. This is an opaque object that is used by -+ * the observable module to trigger notifications. This object should only be -+ * accessible to functions that are authorized to trigger notifications for this -+ * module. Observers do not need this object. */ -+extern dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object); -+ -+/** This function unregisters an observable module. All observers have to be -+ * removed prior to unregistration. */ -+extern void dwc_unregister_notifier(dwc_notifier_t *notifier); -+ -+/** Add a module as an observer to the observable module. The observable module -+ * needs to have previously registered with the notification manager. -+ * -+ * @param observer The observer module -+ * @param object The module to observe -+ * @param notification The notification to observe -+ * @param callback The callback function to call -+ * @param user_data Any additional user data to pass into the callback function */ -+extern int dwc_add_observer(void *observer, void *object, char *notification, -+ dwc_notifier_callback_t callback, void *user_data); -+ -+/** Removes the specified observer from all notifications that it is currently -+ * observing. */ -+extern int dwc_remove_observer(void *observer); -+ -+/** This function triggers a Notification. It should be called by the -+ * observable module, or any module or library which the observable module -+ * allows to trigger notification on it's behalf. Such as the dwc_cc_t. -+ * -+ * dwc_notify is a non-blocking function. Callbacks are scheduled called in -+ * their own process context for each trigger. Callbacks can be blocking. -+ * dwc_notify can be called from interrupt context if needed. -+ * -+ */ -+void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data); -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* __DWC_NOTIFIER_H__ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_os.h -@@ -0,0 +1,1276 @@ -+/* ========================================================================= -+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_os.h $ -+ * $Revision: #14 $ -+ * $Date: 2010/11/04 $ -+ * $Change: 1621695 $ -+ * -+ * Synopsys Portability Library Software and documentation -+ * (hereinafter, "Software") is an Unsupported proprietary work of -+ * Synopsys, Inc. unless otherwise expressly agreed to in writing -+ * between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product -+ * under any End User Software License Agreement or Agreement for -+ * Licensed Product with Synopsys or any supplement thereto. You are -+ * permitted to use and redistribute this Software in source and binary -+ * forms, with or without modification, provided that redistributions -+ * of source code must retain this notice. You may not view, use, -+ * disclose, copy or distribute this file or any information contained -+ * herein except pursuant to this license grant from Synopsys. If you -+ * do not agree with this notice, including the disclaimer below, then -+ * you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" -+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL -+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY -+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================= */ -+#ifndef _DWC_OS_H_ -+#define _DWC_OS_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/** @file -+ * -+ * DWC portability library, low level os-wrapper functions -+ * -+ */ -+ -+/* These basic types need to be defined by some OS header file or custom header -+ * file for your specific target architecture. -+ * -+ * uint8_t, int8_t, uint16_t, int16_t, uint32_t, int32_t, uint64_t, int64_t -+ * -+ * Any custom or alternate header file must be added and enabled here. -+ */ -+ -+#ifdef DWC_LINUX -+# include -+# ifdef CONFIG_DEBUG_MUTEXES -+# include -+# endif -+# include -+# include -+# include -+#endif -+ -+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) -+# include -+#endif -+ -+ -+/** @name Primitive Types and Values */ -+ -+/** We define a boolean type for consistency. Can be either YES or NO */ -+typedef uint8_t dwc_bool_t; -+#define YES 1 -+#define NO 0 -+ -+#ifdef DWC_LINUX -+ -+/** @name Error Codes */ -+#define DWC_E_INVALID EINVAL -+#define DWC_E_NO_MEMORY ENOMEM -+#define DWC_E_NO_DEVICE ENODEV -+#define DWC_E_NOT_SUPPORTED EOPNOTSUPP -+#define DWC_E_TIMEOUT ETIMEDOUT -+#define DWC_E_BUSY EBUSY -+#define DWC_E_AGAIN EAGAIN -+#define DWC_E_RESTART ERESTART -+#define DWC_E_ABORT ECONNABORTED -+#define DWC_E_SHUTDOWN ESHUTDOWN -+#define DWC_E_NO_DATA ENODATA -+#define DWC_E_DISCONNECT ECONNRESET -+#define DWC_E_UNKNOWN EINVAL -+#define DWC_E_NO_STREAM_RES ENOSR -+#define DWC_E_COMMUNICATION ECOMM -+#define DWC_E_OVERFLOW EOVERFLOW -+#define DWC_E_PROTOCOL EPROTO -+#define DWC_E_IN_PROGRESS EINPROGRESS -+#define DWC_E_PIPE EPIPE -+#define DWC_E_IO EIO -+#define DWC_E_NO_SPACE ENOSPC -+ -+#else -+ -+/** @name Error Codes */ -+#define DWC_E_INVALID 1001 -+#define DWC_E_NO_MEMORY 1002 -+#define DWC_E_NO_DEVICE 1003 -+#define DWC_E_NOT_SUPPORTED 1004 -+#define DWC_E_TIMEOUT 1005 -+#define DWC_E_BUSY 1006 -+#define DWC_E_AGAIN 1007 -+#define DWC_E_RESTART 1008 -+#define DWC_E_ABORT 1009 -+#define DWC_E_SHUTDOWN 1010 -+#define DWC_E_NO_DATA 1011 -+#define DWC_E_DISCONNECT 2000 -+#define DWC_E_UNKNOWN 3000 -+#define DWC_E_NO_STREAM_RES 4001 -+#define DWC_E_COMMUNICATION 4002 -+#define DWC_E_OVERFLOW 4003 -+#define DWC_E_PROTOCOL 4004 -+#define DWC_E_IN_PROGRESS 4005 -+#define DWC_E_PIPE 4006 -+#define DWC_E_IO 4007 -+#define DWC_E_NO_SPACE 4008 -+ -+#endif -+ -+ -+/** @name Tracing/Logging Functions -+ * -+ * These function provide the capability to add tracing, debugging, and error -+ * messages, as well exceptions as assertions. The WUDEV uses these -+ * extensively. These could be logged to the main console, the serial port, an -+ * internal buffer, etc. These functions could also be no-op if they are too -+ * expensive on your system. By default undefining the DEBUG macro already -+ * no-ops some of these functions. */ -+ -+/** Returns non-zero if in interrupt context. */ -+extern dwc_bool_t DWC_IN_IRQ(void); -+#define dwc_in_irq DWC_IN_IRQ -+ -+/** Returns "IRQ" if DWC_IN_IRQ is true. */ -+static inline char *dwc_irq(void) { -+ return DWC_IN_IRQ() ? "IRQ" : ""; -+} -+ -+/** Returns non-zero if in bottom-half context. */ -+extern dwc_bool_t DWC_IN_BH(void); -+#define dwc_in_bh DWC_IN_BH -+ -+/** Returns "BH" if DWC_IN_BH is true. */ -+static inline char *dwc_bh(void) { -+ return DWC_IN_BH() ? "BH" : ""; -+} -+ -+/** -+ * A vprintf() clone. Just call vprintf if you've got it. -+ */ -+extern void DWC_VPRINTF(char *format, va_list args); -+#define dwc_vprintf DWC_VPRINTF -+ -+/** -+ * A vsnprintf() clone. Just call vprintf if you've got it. -+ */ -+extern int DWC_VSNPRINTF(char *str, int size, char *format, va_list args); -+#define dwc_vsnprintf DWC_VSNPRINTF -+ -+/** -+ * printf() clone. Just call printf if you've go it. -+ */ -+extern void DWC_PRINTF(char *format, ...) -+/* This provides compiler level static checking of the parameters if you're -+ * using GCC. */ -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 1, 2))); -+#else -+ ; -+#endif -+#define dwc_printf DWC_PRINTF -+ -+/** -+ * sprintf() clone. Just call sprintf if you've got it. -+ */ -+extern int DWC_SPRINTF(char *string, char *format, ...) -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 2, 3))); -+#else -+ ; -+#endif -+#define dwc_sprintf DWC_SPRINTF -+ -+/** -+ * snprintf() clone. Just call snprintf if you've got it. -+ */ -+extern int DWC_SNPRINTF(char *string, int size, char *format, ...) -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 3, 4))); -+#else -+ ; -+#endif -+#define dwc_snprintf DWC_SNPRINTF -+ -+/** -+ * Prints a WARNING message. On systems that don't differentiate between -+ * warnings and regular log messages, just print it. Indicates that something -+ * may be wrong with the driver. Works like printf(). -+ * -+ * Use the DWC_WARN macro to call this function. -+ */ -+extern void __DWC_WARN(char *format, ...) -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 1, 2))); -+#else -+ ; -+#endif -+ -+/** -+ * Prints an error message. On systems that don't differentiate between errors -+ * and regular log messages, just print it. Indicates that something went wrong -+ * with the driver. Works like printf(). -+ * -+ * Use the DWC_ERROR macro to call this function. -+ */ -+extern void __DWC_ERROR(char *format, ...) -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 1, 2))); -+#else -+ ; -+#endif -+ -+/** -+ * Prints an exception error message and takes some user-defined action such as -+ * print out a backtrace or trigger a breakpoint. Indicates that something went -+ * abnormally wrong with the driver such as programmer error, or other -+ * exceptional condition. It should not be ignored so even on systems without -+ * printing capability, some action should be taken to notify the developer of -+ * it. Works like printf(). -+ */ -+extern void DWC_EXCEPTION(char *format, ...) -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 1, 2))); -+#else -+ ; -+#endif -+#define dwc_exception DWC_EXCEPTION -+ -+#ifndef DWC_OTG_DEBUG_LEV -+#define DWC_OTG_DEBUG_LEV 0 -+#endif -+ -+#ifdef DEBUG -+/** -+ * Prints out a debug message. Used for logging/trace messages. -+ * -+ * Use the DWC_DEBUG macro to call this function -+ */ -+extern void __DWC_DEBUG(char *format, ...) -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 1, 2))); -+#else -+ ; -+#endif -+#else -+#define __DWC_DEBUG printk -+#endif -+ -+/** -+ * Prints out a Debug message. -+ */ -+#define DWC_DEBUG(_format, _args...) __DWC_DEBUG("DEBUG:%s:%s: " _format "\n", \ -+ __func__, dwc_irq(), ## _args) -+#define dwc_debug DWC_DEBUG -+/** -+ * Prints out a Debug message if enabled at compile time. -+ */ -+#if DWC_OTG_DEBUG_LEV > 0 -+#define DWC_DEBUGC(_format, _args...) DWC_DEBUG(_format, ##_args ) -+#else -+#define DWC_DEBUGC(_format, _args...) -+#endif -+#define dwc_debugc DWC_DEBUGC -+/** -+ * Prints out an informative message. -+ */ -+#define DWC_INFO(_format, _args...) DWC_PRINTF("INFO:%s: " _format "\n", \ -+ dwc_irq(), ## _args) -+#define dwc_info DWC_INFO -+/** -+ * Prints out an informative message if enabled at compile time. -+ */ -+#if DWC_OTG_DEBUG_LEV > 1 -+#define DWC_INFOC(_format, _args...) DWC_INFO(_format, ##_args ) -+#else -+#define DWC_INFOC(_format, _args...) -+#endif -+#define dwc_infoc DWC_INFOC -+/** -+ * Prints out a warning message. -+ */ -+#define DWC_WARN(_format, _args...) __DWC_WARN("WARN:%s:%s:%d: " _format "\n", \ -+ dwc_irq(), __func__, __LINE__, ## _args) -+#define dwc_warn DWC_WARN -+/** -+ * Prints out an error message. -+ */ -+#define DWC_ERROR(_format, _args...) __DWC_ERROR("ERROR:%s:%s:%d: " _format "\n", \ -+ dwc_irq(), __func__, __LINE__, ## _args) -+#define dwc_error DWC_ERROR -+ -+#define DWC_PROTO_ERROR(_format, _args...) __DWC_WARN("ERROR:%s:%s:%d: " _format "\n", \ -+ dwc_irq(), __func__, __LINE__, ## _args) -+#define dwc_proto_error DWC_PROTO_ERROR -+ -+#ifdef DEBUG -+/** Prints out a exception error message if the _expr expression fails. Disabled -+ * if DEBUG is not enabled. */ -+#define DWC_ASSERT(_expr, _format, _args...) do { \ -+ if (!(_expr)) { DWC_EXCEPTION("%s:%s:%d: " _format "\n", dwc_irq(), \ -+ __FILE__, __LINE__, ## _args); } \ -+ } while (0) -+#else -+#define DWC_ASSERT(_x...) -+#endif -+#define dwc_assert DWC_ASSERT -+ -+ -+/** @name Byte Ordering -+ * The following functions are for conversions between processor's byte ordering -+ * and specific ordering you want. -+ */ -+ -+/** Converts 32 bit data in CPU byte ordering to little endian. */ -+extern uint32_t DWC_CPU_TO_LE32(uint32_t *p); -+#define dwc_cpu_to_le32 DWC_CPU_TO_LE32 -+ -+/** Converts 32 bit data in CPU byte orderint to big endian. */ -+extern uint32_t DWC_CPU_TO_BE32(uint32_t *p); -+#define dwc_cpu_to_be32 DWC_CPU_TO_BE32 -+ -+/** Converts 32 bit little endian data to CPU byte ordering. */ -+extern uint32_t DWC_LE32_TO_CPU(uint32_t *p); -+#define dwc_le32_to_cpu DWC_LE32_TO_CPU -+ -+/** Converts 32 bit big endian data to CPU byte ordering. */ -+extern uint32_t DWC_BE32_TO_CPU(uint32_t *p); -+#define dwc_be32_to_cpu DWC_BE32_TO_CPU -+ -+/** Converts 16 bit data in CPU byte ordering to little endian. */ -+extern uint16_t DWC_CPU_TO_LE16(uint16_t *p); -+#define dwc_cpu_to_le16 DWC_CPU_TO_LE16 -+ -+/** Converts 16 bit data in CPU byte orderint to big endian. */ -+extern uint16_t DWC_CPU_TO_BE16(uint16_t *p); -+#define dwc_cpu_to_be16 DWC_CPU_TO_BE16 -+ -+/** Converts 16 bit little endian data to CPU byte ordering. */ -+extern uint16_t DWC_LE16_TO_CPU(uint16_t *p); -+#define dwc_le16_to_cpu DWC_LE16_TO_CPU -+ -+/** Converts 16 bit bi endian data to CPU byte ordering. */ -+extern uint16_t DWC_BE16_TO_CPU(uint16_t *p); -+#define dwc_be16_to_cpu DWC_BE16_TO_CPU -+ -+ -+/** @name Register Read/Write -+ * -+ * The following six functions should be implemented to read/write registers of -+ * 32-bit and 64-bit sizes. All modules use this to read/write register values. -+ * The reg value is a pointer to the register calculated from the void *base -+ * variable passed into the driver when it is started. */ -+ -+#ifdef DWC_LINUX -+/* Linux doesn't need any extra parameters for register read/write, so we -+ * just throw away the IO context parameter. -+ */ -+/** Reads the content of a 32-bit register. */ -+extern uint32_t DWC_READ_REG32(uint32_t volatile *reg); -+#define dwc_read_reg32(_ctx_,_reg_) DWC_READ_REG32(_reg_) -+ -+/** Reads the content of a 64-bit register. */ -+extern uint64_t DWC_READ_REG64(uint64_t volatile *reg); -+#define dwc_read_reg64(_ctx_,_reg_) DWC_READ_REG64(_reg_) -+ -+/** Writes to a 32-bit register. */ -+extern void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value); -+#define dwc_write_reg32(_ctx_,_reg_,_val_) DWC_WRITE_REG32(_reg_, _val_) -+ -+/** Writes to a 64-bit register. */ -+extern void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value); -+#define dwc_write_reg64(_ctx_,_reg_,_val_) DWC_WRITE_REG64(_reg_, _val_) -+ -+/** -+ * Modify bit values in a register. Using the -+ * algorithm: (reg_contents & ~clear_mask) | set_mask. -+ */ -+extern void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask); -+#define dwc_modify_reg32(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG32(_reg_,_cmsk_,_smsk_) -+extern void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask); -+#define dwc_modify_reg64(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG64(_reg_,_cmsk_,_smsk_) -+ -+#endif /* DWC_LINUX */ -+ -+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) -+typedef struct dwc_ioctx { -+ struct device *dev; -+ bus_space_tag_t iot; -+ bus_space_handle_t ioh; -+} dwc_ioctx_t; -+ -+/** BSD needs two extra parameters for register read/write, so we pass -+ * them in using the IO context parameter. -+ */ -+/** Reads the content of a 32-bit register. */ -+extern uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg); -+#define dwc_read_reg32 DWC_READ_REG32 -+ -+/** Reads the content of a 64-bit register. */ -+extern uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg); -+#define dwc_read_reg64 DWC_READ_REG64 -+ -+/** Writes to a 32-bit register. */ -+extern void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value); -+#define dwc_write_reg32 DWC_WRITE_REG32 -+ -+/** Writes to a 64-bit register. */ -+extern void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value); -+#define dwc_write_reg64 DWC_WRITE_REG64 -+ -+/** -+ * Modify bit values in a register. Using the -+ * algorithm: (reg_contents & ~clear_mask) | set_mask. -+ */ -+extern void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask); -+#define dwc_modify_reg32 DWC_MODIFY_REG32 -+extern void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask); -+#define dwc_modify_reg64 DWC_MODIFY_REG64 -+ -+#endif /* DWC_FREEBSD || DWC_NETBSD */ -+ -+/** @cond */ -+ -+/** @name Some convenience MACROS used internally. Define DWC_DEBUG_REGS to log the -+ * register writes. */ -+ -+#ifdef DWC_LINUX -+ -+# ifdef DWC_DEBUG_REGS -+ -+#define dwc_define_read_write_reg_n(_reg,_container_type) \ -+static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \ -+ return DWC_READ_REG32(&container->regs->_reg[num]); \ -+} \ -+static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \ -+ DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \ -+ &(((uint32_t*)container->regs->_reg)[num]), data); \ -+ DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \ -+} -+ -+#define dwc_define_read_write_reg(_reg,_container_type) \ -+static inline uint32_t dwc_read_##_reg(_container_type *container) { \ -+ return DWC_READ_REG32(&container->regs->_reg); \ -+} \ -+static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \ -+ DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \ -+ DWC_WRITE_REG32(&container->regs->_reg, data); \ -+} -+ -+# else /* DWC_DEBUG_REGS */ -+ -+#define dwc_define_read_write_reg_n(_reg,_container_type) \ -+static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \ -+ return DWC_READ_REG32(&container->regs->_reg[num]); \ -+} \ -+static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \ -+ DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \ -+} -+ -+#define dwc_define_read_write_reg(_reg,_container_type) \ -+static inline uint32_t dwc_read_##_reg(_container_type *container) { \ -+ return DWC_READ_REG32(&container->regs->_reg); \ -+} \ -+static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \ -+ DWC_WRITE_REG32(&container->regs->_reg, data); \ -+} -+ -+# endif /* DWC_DEBUG_REGS */ -+ -+#endif /* DWC_LINUX */ -+ -+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) -+ -+# ifdef DWC_DEBUG_REGS -+ -+#define dwc_define_read_write_reg_n(_reg,_container_type) \ -+static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \ -+ return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \ -+} \ -+static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \ -+ DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \ -+ &(((uint32_t*)container->regs->_reg)[num]), data); \ -+ DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \ -+} -+ -+#define dwc_define_read_write_reg(_reg,_container_type) \ -+static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \ -+ return DWC_READ_REG32(io_ctx, &container->regs->_reg); \ -+} \ -+static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \ -+ DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \ -+ DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \ -+} -+ -+# else /* DWC_DEBUG_REGS */ -+ -+#define dwc_define_read_write_reg_n(_reg,_container_type) \ -+static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \ -+ return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \ -+} \ -+static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \ -+ DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \ -+} -+ -+#define dwc_define_read_write_reg(_reg,_container_type) \ -+static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \ -+ return DWC_READ_REG32(io_ctx, &container->regs->_reg); \ -+} \ -+static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \ -+ DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \ -+} -+ -+# endif /* DWC_DEBUG_REGS */ -+ -+#endif /* DWC_FREEBSD || DWC_NETBSD */ -+ -+/** @endcond */ -+ -+ -+#ifdef DWC_CRYPTOLIB -+/** @name Crypto Functions -+ * -+ * These are the low-level cryptographic functions used by the driver. */ -+ -+/** Perform AES CBC */ -+extern int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out); -+#define dwc_aes_cbc DWC_AES_CBC -+ -+/** Fill the provided buffer with random bytes. These should be cryptographic grade random numbers. */ -+extern void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length); -+#define dwc_random_bytes DWC_RANDOM_BYTES -+ -+/** Perform the SHA-256 hash function */ -+extern int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out); -+#define dwc_sha256 DWC_SHA256 -+ -+/** Calculated the HMAC-SHA256 */ -+extern int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t *out); -+#define dwc_hmac_sha256 DWC_HMAC_SHA256 -+ -+#endif /* DWC_CRYPTOLIB */ -+ -+ -+/** @name Memory Allocation -+ * -+ * These function provide access to memory allocation. There are only 2 DMA -+ * functions and 3 Regular memory functions that need to be implemented. None -+ * of the memory debugging routines need to be implemented. The allocation -+ * routines all ZERO the contents of the memory. -+ * -+ * Defining DWC_DEBUG_MEMORY turns on memory debugging and statistic gathering. -+ * This checks for memory leaks, keeping track of alloc/free pairs. It also -+ * keeps track of how much memory the driver is using at any given time. */ -+ -+#define DWC_PAGE_SIZE 4096 -+#define DWC_PAGE_OFFSET(addr) (((uint32_t)addr) & 0xfff) -+#define DWC_PAGE_ALIGNED(addr) ((((uint32_t)addr) & 0xfff) == 0) -+ -+#define DWC_INVALID_DMA_ADDR 0x0 -+ -+#ifdef DWC_LINUX -+/** Type for a DMA address */ -+typedef dma_addr_t dwc_dma_t; -+#endif -+ -+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) -+typedef bus_addr_t dwc_dma_t; -+#endif -+ -+#ifdef DWC_FREEBSD -+typedef struct dwc_dmactx { -+ struct device *dev; -+ bus_dma_tag_t dma_tag; -+ bus_dmamap_t dma_map; -+ bus_addr_t dma_paddr; -+ void *dma_vaddr; -+} dwc_dmactx_t; -+#endif -+ -+#ifdef DWC_NETBSD -+typedef struct dwc_dmactx { -+ struct device *dev; -+ bus_dma_tag_t dma_tag; -+ bus_dmamap_t dma_map; -+ bus_dma_segment_t segs[1]; -+ int nsegs; -+ bus_addr_t dma_paddr; -+ void *dma_vaddr; -+} dwc_dmactx_t; -+#endif -+ -+/* @todo these functions will be added in the future */ -+#if 0 -+/** -+ * Creates a DMA pool from which you can allocate DMA buffers. Buffers -+ * allocated from this pool will be guaranteed to meet the size, alignment, and -+ * boundary requirements specified. -+ * -+ * @param[in] size Specifies the size of the buffers that will be allocated from -+ * this pool. -+ * @param[in] align Specifies the byte alignment requirements of the buffers -+ * allocated from this pool. Must be a power of 2. -+ * @param[in] boundary Specifies the N-byte boundary that buffers allocated from -+ * this pool must not cross. -+ * -+ * @returns A pointer to an internal opaque structure which is not to be -+ * accessed outside of these library functions. Use this handle to specify -+ * which pools to allocate/free DMA buffers from and also to destroy the pool, -+ * when you are done with it. -+ */ -+extern dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, uint32_t align, uint32_t boundary); -+ -+/** -+ * Destroy a DMA pool. All buffers allocated from that pool must be freed first. -+ */ -+extern void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool); -+ -+/** -+ * Allocate a buffer from the specified DMA pool and zeros its contents. -+ */ -+extern void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr); -+ -+/** -+ * Free a previously allocated buffer from the DMA pool. -+ */ -+extern void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr); -+#endif -+ -+/** Allocates a DMA capable buffer and zeroes its contents. */ -+extern void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr); -+ -+/** Allocates a DMA capable buffer and zeroes its contents in atomic contest */ -+extern void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr); -+ -+/** Frees a previously allocated buffer. */ -+extern void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr); -+ -+/** Allocates a block of memory and zeroes its contents. */ -+extern void *__DWC_ALLOC(void *mem_ctx, uint32_t size); -+ -+/** Allocates a block of memory and zeroes its contents, in an atomic manner -+ * which can be used inside interrupt context. The size should be sufficiently -+ * small, a few KB at most, such that failures are not likely to occur. Can just call -+ * __DWC_ALLOC if it is atomic. */ -+extern void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size); -+ -+/** Frees a previously allocated buffer. */ -+extern void __DWC_FREE(void *mem_ctx, void *addr); -+ -+#ifndef DWC_DEBUG_MEMORY -+ -+#define DWC_ALLOC(_size_) __DWC_ALLOC(NULL, _size_) -+#define DWC_ALLOC_ATOMIC(_size_) __DWC_ALLOC_ATOMIC(NULL, _size_) -+#define DWC_FREE(_addr_) __DWC_FREE(NULL, _addr_) -+ -+# ifdef DWC_LINUX -+#define DWC_DMA_ALLOC(_dev, _size_, _dma_) __DWC_DMA_ALLOC(_dev, _size_, _dma_) -+#define DWC_DMA_ALLOC_ATOMIC(_dev, _size_, _dma_) __DWC_DMA_ALLOC_ATOMIC(_dev, _size_, _dma_) -+#define DWC_DMA_FREE(_dev, _size_,_virt_, _dma_) __DWC_DMA_FREE(_dev, _size_, _virt_, _dma_) -+# endif -+ -+# if defined(DWC_FREEBSD) || defined(DWC_NETBSD) -+#define DWC_DMA_ALLOC __DWC_DMA_ALLOC -+#define DWC_DMA_FREE __DWC_DMA_FREE -+# endif -+extern void *dwc_dma_alloc_atomic_debug(uint32_t size, dwc_dma_t *dma_addr, char const *func, int line); -+ -+#else /* DWC_DEBUG_MEMORY */ -+ -+extern void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line); -+extern void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func, int line); -+extern void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line); -+extern void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr, -+ char const *func, int line); -+extern void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr, -+ char const *func, int line); -+extern void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr, -+ dwc_dma_t dma_addr, char const *func, int line); -+ -+extern int dwc_memory_debug_start(void *mem_ctx); -+extern void dwc_memory_debug_stop(void); -+extern void dwc_memory_debug_report(void); -+ -+#define DWC_ALLOC(_size_) dwc_alloc_debug(NULL, _size_, __func__, __LINE__) -+#define DWC_ALLOC_ATOMIC(_size_) dwc_alloc_atomic_debug(NULL, _size_, \ -+ __func__, __LINE__) -+#define DWC_FREE(_addr_) dwc_free_debug(NULL, _addr_, __func__, __LINE__) -+ -+# ifdef DWC_LINUX -+#define DWC_DMA_ALLOC(_dev, _size_, _dma_) \ -+ dwc_dma_alloc_debug(_dev, _size_, _dma_, __func__, __LINE__) -+#define DWC_DMA_ALLOC_ATOMIC(_dev, _size_, _dma_) \ -+ dwc_dma_alloc_atomic_debug(_dev, _size_, _dma_, __func__, __LINE__) -+#define DWC_DMA_FREE(_dev, _size_, _virt_, _dma_) \ -+ dwc_dma_free_debug(_dev, _size_, _virt_, _dma_, __func__, __LINE__) -+# endif -+ -+# if defined(DWC_FREEBSD) || defined(DWC_NETBSD) -+#define DWC_DMA_ALLOC(_ctx_,_size_,_dma_) dwc_dma_alloc_debug(_ctx_, _size_, \ -+ _dma_, __func__, __LINE__) -+#define DWC_DMA_FREE(_ctx_,_size_,_virt_,_dma_) dwc_dma_free_debug(_ctx_, _size_, \ -+ _virt_, _dma_, __func__, __LINE__) -+# endif -+ -+#endif /* DWC_DEBUG_MEMORY */ -+ -+#define dwc_alloc(_ctx_,_size_) DWC_ALLOC(_size_) -+#define dwc_alloc_atomic(_ctx_,_size_) DWC_ALLOC_ATOMIC(_size_) -+#define dwc_free(_ctx_,_addr_) DWC_FREE(_addr_) -+ -+#ifdef DWC_LINUX -+/* Linux doesn't need any extra parameters for DMA buffer allocation, so we -+ * just throw away the DMA context parameter. -+ */ -+#define dwc_dma_alloc(_ctx_,_size_,_dma_) DWC_DMA_ALLOC(_size_, _dma_) -+#define dwc_dma_alloc_atomic(_ctx_,_size_,_dma_) DWC_DMA_ALLOC_ATOMIC(_size_, _dma_) -+#define dwc_dma_free(_ctx_,_size_,_virt_,_dma_) DWC_DMA_FREE(_size_, _virt_, _dma_) -+#endif -+ -+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) -+/** BSD needs several extra parameters for DMA buffer allocation, so we pass -+ * them in using the DMA context parameter. -+ */ -+#define dwc_dma_alloc DWC_DMA_ALLOC -+#define dwc_dma_free DWC_DMA_FREE -+#endif -+ -+ -+/** @name Memory and String Processing */ -+ -+/** memset() clone */ -+extern void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size); -+#define dwc_memset DWC_MEMSET -+ -+/** memcpy() clone */ -+extern void *DWC_MEMCPY(void *dest, void const *src, uint32_t size); -+#define dwc_memcpy DWC_MEMCPY -+ -+/** memmove() clone */ -+extern void *DWC_MEMMOVE(void *dest, void *src, uint32_t size); -+#define dwc_memmove DWC_MEMMOVE -+ -+/** memcmp() clone */ -+extern int DWC_MEMCMP(void *m1, void *m2, uint32_t size); -+#define dwc_memcmp DWC_MEMCMP -+ -+/** strcmp() clone */ -+extern int DWC_STRCMP(void *s1, void *s2); -+#define dwc_strcmp DWC_STRCMP -+ -+/** strncmp() clone */ -+extern int DWC_STRNCMP(void *s1, void *s2, uint32_t size); -+#define dwc_strncmp DWC_STRNCMP -+ -+/** strlen() clone, for NULL terminated ASCII strings */ -+extern int DWC_STRLEN(char const *str); -+#define dwc_strlen DWC_STRLEN -+ -+/** strcpy() clone, for NULL terminated ASCII strings */ -+extern char *DWC_STRCPY(char *to, const char *from); -+#define dwc_strcpy DWC_STRCPY -+ -+/** strdup() clone. If you wish to use memory allocation debugging, this -+ * implementation of strdup should use the DWC_* memory routines instead of -+ * calling a predefined strdup. Otherwise the memory allocated by this routine -+ * will not be seen by the debugging routines. */ -+extern char *DWC_STRDUP(char const *str); -+#define dwc_strdup(_ctx_,_str_) DWC_STRDUP(_str_) -+ -+/** NOT an atoi() clone. Read the description carefully. Returns an integer -+ * converted from the string str in base 10 unless the string begins with a "0x" -+ * in which case it is base 16. String must be a NULL terminated sequence of -+ * ASCII characters and may optionally begin with whitespace, a + or -, and a -+ * "0x" prefix if base 16. The remaining characters must be valid digits for -+ * the number and end with a NULL character. If any invalid characters are -+ * encountered or it returns with a negative error code and the results of the -+ * conversion are undefined. On sucess it returns 0. Overflow conditions are -+ * undefined. An example implementation using atoi() can be referenced from the -+ * Linux implementation. */ -+extern int DWC_ATOI(const char *str, int32_t *value); -+#define dwc_atoi DWC_ATOI -+ -+/** Same as above but for unsigned. */ -+extern int DWC_ATOUI(const char *str, uint32_t *value); -+#define dwc_atoui DWC_ATOUI -+ -+#ifdef DWC_UTFLIB -+/** This routine returns a UTF16LE unicode encoded string from a UTF8 string. */ -+extern int DWC_UTF8_TO_UTF16LE(uint8_t const *utf8string, uint16_t *utf16string, unsigned len); -+#define dwc_utf8_to_utf16le DWC_UTF8_TO_UTF16LE -+#endif -+ -+ -+/** @name Wait queues -+ * -+ * Wait queues provide a means of synchronizing between threads or processes. A -+ * process can block on a waitq if some condition is not true, waiting for it to -+ * become true. When the waitq is triggered all waiting process will get -+ * unblocked and the condition will be check again. Waitqs should be triggered -+ * every time a condition can potentially change.*/ -+struct dwc_waitq; -+ -+/** Type for a waitq */ -+typedef struct dwc_waitq dwc_waitq_t; -+ -+/** The type of waitq condition callback function. This is called every time -+ * condition is evaluated. */ -+typedef int (*dwc_waitq_condition_t)(void *data); -+ -+/** Allocate a waitq */ -+extern dwc_waitq_t *DWC_WAITQ_ALLOC(void); -+#define dwc_waitq_alloc(_ctx_) DWC_WAITQ_ALLOC() -+ -+/** Free a waitq */ -+extern void DWC_WAITQ_FREE(dwc_waitq_t *wq); -+#define dwc_waitq_free DWC_WAITQ_FREE -+ -+/** Check the condition and if it is false, block on the waitq. When unblocked, check the -+ * condition again. The function returns when the condition becomes true. The return value -+ * is 0 on condition true, DWC_WAITQ_ABORTED on abort or killed, or DWC_WAITQ_UNKNOWN on error. */ -+extern int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data); -+#define dwc_waitq_wait DWC_WAITQ_WAIT -+ -+/** Check the condition and if it is false, block on the waitq. When unblocked, -+ * check the condition again. The function returns when the condition become -+ * true or the timeout has passed. The return value is 0 on condition true or -+ * DWC_TIMED_OUT on timeout, or DWC_WAITQ_ABORTED, or DWC_WAITQ_UNKNOWN on -+ * error. */ -+extern int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, -+ void *data, int32_t msecs); -+#define dwc_waitq_wait_timeout DWC_WAITQ_WAIT_TIMEOUT -+ -+/** Trigger a waitq, unblocking all processes. This should be called whenever a condition -+ * has potentially changed. */ -+extern void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq); -+#define dwc_waitq_trigger DWC_WAITQ_TRIGGER -+ -+/** Unblock all processes waiting on the waitq with an ABORTED result. */ -+extern void DWC_WAITQ_ABORT(dwc_waitq_t *wq); -+#define dwc_waitq_abort DWC_WAITQ_ABORT -+ -+ -+/** @name Threads -+ * -+ * A thread must be explicitly stopped. It must check DWC_THREAD_SHOULD_STOP -+ * whenever it is woken up, and then return. The DWC_THREAD_STOP function -+ * returns the value from the thread. -+ */ -+ -+struct dwc_thread; -+ -+/** Type for a thread */ -+typedef struct dwc_thread dwc_thread_t; -+ -+/** The thread function */ -+typedef int (*dwc_thread_function_t)(void *data); -+ -+/** Create a thread and start it running the thread_function. Returns a handle -+ * to the thread */ -+extern dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data); -+#define dwc_thread_run(_ctx_,_func_,_name_,_data_) DWC_THREAD_RUN(_func_, _name_, _data_) -+ -+/** Stops a thread. Return the value returned by the thread. Or will return -+ * DWC_ABORT if the thread never started. */ -+extern int DWC_THREAD_STOP(dwc_thread_t *thread); -+#define dwc_thread_stop DWC_THREAD_STOP -+ -+/** Signifies to the thread that it must stop. */ -+#ifdef DWC_LINUX -+/* Linux doesn't need any parameters for kthread_should_stop() */ -+extern dwc_bool_t DWC_THREAD_SHOULD_STOP(void); -+#define dwc_thread_should_stop(_thrd_) DWC_THREAD_SHOULD_STOP() -+ -+/* No thread_exit function in Linux */ -+#define dwc_thread_exit(_thrd_) -+#endif -+ -+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) -+/** BSD needs the thread pointer for kthread_suspend_check() */ -+extern dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread); -+#define dwc_thread_should_stop DWC_THREAD_SHOULD_STOP -+ -+/** The thread must call this to exit. */ -+extern void DWC_THREAD_EXIT(dwc_thread_t *thread); -+#define dwc_thread_exit DWC_THREAD_EXIT -+#endif -+ -+ -+/** @name Work queues -+ * -+ * Workqs are used to queue a callback function to be called at some later time, -+ * in another thread. */ -+struct dwc_workq; -+ -+/** Type for a workq */ -+typedef struct dwc_workq dwc_workq_t; -+ -+/** The type of the callback function to be called. */ -+typedef void (*dwc_work_callback_t)(void *data); -+ -+/** Allocate a workq */ -+extern dwc_workq_t *DWC_WORKQ_ALLOC(char *name); -+#define dwc_workq_alloc(_ctx_,_name_) DWC_WORKQ_ALLOC(_name_) -+ -+/** Free a workq. All work must be completed before being freed. */ -+extern void DWC_WORKQ_FREE(dwc_workq_t *workq); -+#define dwc_workq_free DWC_WORKQ_FREE -+ -+/** Schedule a callback on the workq, passing in data. The function will be -+ * scheduled at some later time. */ -+extern void DWC_WORKQ_SCHEDULE(dwc_workq_t *workq, dwc_work_callback_t cb, -+ void *data, char *format, ...) -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 4, 5))); -+#else -+ ; -+#endif -+#define dwc_workq_schedule DWC_WORKQ_SCHEDULE -+ -+/** Schedule a callback on the workq, that will be called until at least -+ * given number miliseconds have passed. */ -+extern void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *workq, dwc_work_callback_t cb, -+ void *data, uint32_t time, char *format, ...) -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 5, 6))); -+#else -+ ; -+#endif -+#define dwc_workq_schedule_delayed DWC_WORKQ_SCHEDULE_DELAYED -+ -+/** The number of processes in the workq */ -+extern int DWC_WORKQ_PENDING(dwc_workq_t *workq); -+#define dwc_workq_pending DWC_WORKQ_PENDING -+ -+/** Blocks until all the work in the workq is complete or timed out. Returns < -+ * 0 on timeout. */ -+extern int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout); -+#define dwc_workq_wait_work_done DWC_WORKQ_WAIT_WORK_DONE -+ -+ -+/** @name Tasklets -+ * -+ */ -+struct dwc_tasklet; -+ -+/** Type for a tasklet */ -+typedef struct dwc_tasklet dwc_tasklet_t; -+ -+/** The type of the callback function to be called */ -+typedef void (*dwc_tasklet_callback_t)(void *data); -+ -+/** Allocates a tasklet */ -+extern dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data); -+#define dwc_task_alloc(_ctx_,_name_,_cb_,_data_) DWC_TASK_ALLOC(_name_, _cb_, _data_) -+ -+/** Frees a tasklet */ -+extern void DWC_TASK_FREE(dwc_tasklet_t *task); -+#define dwc_task_free DWC_TASK_FREE -+ -+/** Schedules a tasklet to run */ -+extern void DWC_TASK_SCHEDULE(dwc_tasklet_t *task); -+#define dwc_task_schedule DWC_TASK_SCHEDULE -+ -+extern void DWC_TASK_HI_SCHEDULE(dwc_tasklet_t *task); -+#define dwc_task_hi_schedule DWC_TASK_HI_SCHEDULE -+ -+/** @name Timer -+ * -+ * Callbacks must be small and atomic. -+ */ -+struct dwc_timer; -+ -+/** Type for a timer */ -+typedef struct dwc_timer dwc_timer_t; -+ -+/** The type of the callback function to be called */ -+typedef void (*dwc_timer_callback_t)(void *data); -+ -+/** Allocates a timer */ -+extern dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data); -+#define dwc_timer_alloc(_ctx_,_name_,_cb_,_data_) DWC_TIMER_ALLOC(_name_,_cb_,_data_) -+ -+/** Frees a timer */ -+extern void DWC_TIMER_FREE(dwc_timer_t *timer); -+#define dwc_timer_free DWC_TIMER_FREE -+ -+/** Schedules the timer to run at time ms from now. And will repeat at every -+ * repeat_interval msec therafter -+ * -+ * Modifies a timer that is still awaiting execution to a new expiration time. -+ * The mod_time is added to the old time. */ -+extern void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time); -+#define dwc_timer_schedule DWC_TIMER_SCHEDULE -+ -+/** Disables the timer from execution. */ -+extern void DWC_TIMER_CANCEL(dwc_timer_t *timer); -+#define dwc_timer_cancel DWC_TIMER_CANCEL -+ -+ -+/** @name Spinlocks -+ * -+ * These locks are used when the work between the lock/unlock is atomic and -+ * short. Interrupts are also disabled during the lock/unlock and thus they are -+ * suitable to lock between interrupt/non-interrupt context. They also lock -+ * between processes if you have multiple CPUs or Preemption. If you don't have -+ * multiple CPUS or Preemption, then the you can simply implement the -+ * DWC_SPINLOCK and DWC_SPINUNLOCK to disable and enable interrupts. Because -+ * the work between the lock/unlock is atomic, the process context will never -+ * change, and so you never have to lock between processes. */ -+ -+struct dwc_spinlock; -+ -+/** Type for a spinlock */ -+typedef struct dwc_spinlock dwc_spinlock_t; -+ -+/** Type for the 'flags' argument to spinlock funtions */ -+typedef unsigned long dwc_irqflags_t; -+ -+/** Returns an initialized lock variable. This function should allocate and -+ * initialize the OS-specific data structure used for locking. This data -+ * structure is to be used for the DWC_LOCK and DWC_UNLOCK functions and should -+ * be freed by the DWC_FREE_LOCK when it is no longer used. -+ * -+ * For Linux Spinlock Debugging make it macro because the debugging routines use -+ * the symbol name to determine recursive locking. Using a wrapper function -+ * makes it falsely think recursive locking occurs. */ -+#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK) -+#define DWC_SPINLOCK_ALLOC_LINUX_DEBUG(lock) ({ \ -+ lock = DWC_ALLOC(sizeof(spinlock_t)); \ -+ if (lock) { \ -+ spin_lock_init((spinlock_t *)lock); \ -+ } \ -+}) -+#else -+extern dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void); -+#define dwc_spinlock_alloc(_ctx_) DWC_SPINLOCK_ALLOC() -+#endif -+ -+/** Frees an initialized lock variable. */ -+extern void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock); -+#define dwc_spinlock_free(_ctx_,_lock_) DWC_SPINLOCK_FREE(_lock_) -+ -+/** Disables interrupts and blocks until it acquires the lock. -+ * -+ * @param lock Pointer to the spinlock. -+ * @param flags Unsigned long for irq flags storage. -+ */ -+extern void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags); -+#define dwc_spinlock_irqsave DWC_SPINLOCK_IRQSAVE -+ -+/** Re-enables the interrupt and releases the lock. -+ * -+ * @param lock Pointer to the spinlock. -+ * @param flags Unsigned long for irq flags storage. Must be the same as was -+ * passed into DWC_LOCK. -+ */ -+extern void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags); -+#define dwc_spinunlock_irqrestore DWC_SPINUNLOCK_IRQRESTORE -+ -+/** Blocks until it acquires the lock. -+ * -+ * @param lock Pointer to the spinlock. -+ */ -+extern void DWC_SPINLOCK(dwc_spinlock_t *lock); -+#define dwc_spinlock DWC_SPINLOCK -+ -+/** Releases the lock. -+ * -+ * @param lock Pointer to the spinlock. -+ */ -+extern void DWC_SPINUNLOCK(dwc_spinlock_t *lock); -+#define dwc_spinunlock DWC_SPINUNLOCK -+ -+ -+/** @name Mutexes -+ * -+ * Unlike spinlocks Mutexes lock only between processes and the work between the -+ * lock/unlock CAN block, therefore it CANNOT be called from interrupt context. -+ */ -+ -+struct dwc_mutex; -+ -+/** Type for a mutex */ -+typedef struct dwc_mutex dwc_mutex_t; -+ -+/* For Linux Mutex Debugging make it inline because the debugging routines use -+ * the symbol to determine recursive locking. This makes it falsely think -+ * recursive locking occurs. */ -+#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES) -+#define DWC_MUTEX_ALLOC_LINUX_DEBUG(__mutexp) ({ \ -+ __mutexp = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex)); \ -+ mutex_init((struct mutex *)__mutexp); \ -+}) -+#endif -+ -+/** Allocate a mutex */ -+extern dwc_mutex_t *DWC_MUTEX_ALLOC(void); -+#define dwc_mutex_alloc(_ctx_) DWC_MUTEX_ALLOC() -+ -+/* For memory leak debugging when using Linux Mutex Debugging */ -+#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES) -+#define DWC_MUTEX_FREE(__mutexp) do { \ -+ mutex_destroy((struct mutex *)__mutexp); \ -+ DWC_FREE(__mutexp); \ -+} while(0) -+#else -+/** Free a mutex */ -+extern void DWC_MUTEX_FREE(dwc_mutex_t *mutex); -+#define dwc_mutex_free(_ctx_,_mutex_) DWC_MUTEX_FREE(_mutex_) -+#endif -+ -+/** Lock a mutex */ -+extern void DWC_MUTEX_LOCK(dwc_mutex_t *mutex); -+#define dwc_mutex_lock DWC_MUTEX_LOCK -+ -+/** Non-blocking lock returns 1 on successful lock. */ -+extern int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex); -+#define dwc_mutex_trylock DWC_MUTEX_TRYLOCK -+ -+/** Unlock a mutex */ -+extern void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex); -+#define dwc_mutex_unlock DWC_MUTEX_UNLOCK -+ -+ -+/** @name Time */ -+ -+/** Microsecond delay. -+ * -+ * @param usecs Microseconds to delay. -+ */ -+extern void DWC_UDELAY(uint32_t usecs); -+#define dwc_udelay DWC_UDELAY -+ -+/** Millisecond delay. -+ * -+ * @param msecs Milliseconds to delay. -+ */ -+extern void DWC_MDELAY(uint32_t msecs); -+#define dwc_mdelay DWC_MDELAY -+ -+/** Non-busy waiting. -+ * Sleeps for specified number of milliseconds. -+ * -+ * @param msecs Milliseconds to sleep. -+ */ -+extern void DWC_MSLEEP(uint32_t msecs); -+#define dwc_msleep DWC_MSLEEP -+ -+/** -+ * Returns number of milliseconds since boot. -+ */ -+extern uint32_t DWC_TIME(void); -+#define dwc_time DWC_TIME -+ -+ -+ -+ -+/* @mainpage DWC Portability and Common Library -+ * -+ * This is the documentation for the DWC Portability and Common Library. -+ * -+ * @section intro Introduction -+ * -+ * The DWC Portability library consists of wrapper calls and data structures to -+ * all low-level functions which are typically provided by the OS. The WUDEV -+ * driver uses only these functions. In order to port the WUDEV driver, only -+ * the functions in this library need to be re-implemented, with the same -+ * behavior as documented here. -+ * -+ * The Common library consists of higher level functions, which rely only on -+ * calling the functions from the DWC Portability library. These common -+ * routines are shared across modules. Some of the common libraries need to be -+ * used directly by the driver programmer when porting WUDEV. Such as the -+ * parameter and notification libraries. -+ * -+ * @section low Portability Library OS Wrapper Functions -+ * -+ * Any function starting with DWC and in all CAPS is a low-level OS-wrapper that -+ * needs to be implemented when porting, for example DWC_MUTEX_ALLOC(). All of -+ * these functions are included in the dwc_os.h file. -+ * -+ * There are many functions here covering a wide array of OS services. Please -+ * see dwc_os.h for details, and implementation notes for each function. -+ * -+ * @section common Common Library Functions -+ * -+ * Any function starting with dwc and in all lowercase is a common library -+ * routine. These functions have a portable implementation and do not need to -+ * be reimplemented when porting. The common routines can be used by any -+ * driver, and some must be used by the end user to control the drivers. For -+ * example, you must use the Parameter common library in order to set the -+ * parameters in the WUDEV module. -+ * -+ * The common libraries consist of the following: -+ * -+ * - Connection Contexts - Used internally and can be used by end-user. See dwc_cc.h -+ * - Parameters - Used internally and can be used by end-user. See dwc_params.h -+ * - Notifications - Used internally and can be used by end-user. See dwc_notifier.h -+ * - Lists - Used internally and can be used by end-user. See dwc_list.h -+ * - Memory Debugging - Used internally and can be used by end-user. See dwc_os.h -+ * - Modpow - Used internally only. See dwc_modpow.h -+ * - DH - Used internally only. See dwc_dh.h -+ * - Crypto - Used internally only. See dwc_crypto.h -+ * -+ * -+ * @section prereq Prerequistes For dwc_os.h -+ * @subsection types Data Types -+ * -+ * The dwc_os.h file assumes that several low-level data types are pre defined for the -+ * compilation environment. These data types are: -+ * -+ * - uint8_t - unsigned 8-bit data type -+ * - int8_t - signed 8-bit data type -+ * - uint16_t - unsigned 16-bit data type -+ * - int16_t - signed 16-bit data type -+ * - uint32_t - unsigned 32-bit data type -+ * - int32_t - signed 32-bit data type -+ * - uint64_t - unsigned 64-bit data type -+ * - int64_t - signed 64-bit data type -+ * -+ * Ensure that these are defined before using dwc_os.h. The easiest way to do -+ * that is to modify the top of the file to include the appropriate header. -+ * This is already done for the Linux environment. If the DWC_LINUX macro is -+ * defined, the correct header will be added. A standard header is -+ * also used for environments where standard C headers are available. -+ * -+ * @subsection stdarg Variable Arguments -+ * -+ * Variable arguments are provided by a standard C header . it is -+ * available in Both the Linux and ANSI C enviornment. An equivalent must be -+ * provided in your enviornment in order to use dwc_os.h with the debug and -+ * tracing message functionality. -+ * -+ * @subsection thread Threading -+ * -+ * WUDEV Core must be run on an operating system that provides for multiple -+ * threads/processes. Threading can be implemented in many ways, even in -+ * embedded systems without an operating system. At the bare minimum, the -+ * system should be able to start any number of processes at any time to handle -+ * special work. It need not be a pre-emptive system. Process context can -+ * change upon a call to a blocking function. The hardware interrupt context -+ * that calls the module's ISR() function must be differentiable from process -+ * context, even if your processes are impemented via a hardware interrupt. -+ * Further locking mechanism between process must exist (or be implemented), and -+ * process context must have a way to disable interrupts for a period of time to -+ * lock them out. If all of this exists, the functions in dwc_os.h related to -+ * threading should be able to be implemented with the defined behavior. -+ * -+ */ -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _DWC_OS_H_ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/usb.h -@@ -0,0 +1,946 @@ -+/* -+ * Copyright (c) 1998 The NetBSD Foundation, Inc. -+ * All rights reserved. -+ * -+ * This code is derived from software contributed to The NetBSD Foundation -+ * by Lennart Augustsson (lennart@augustsson.net) at -+ * Carlstedt Research & Technology. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. All advertising materials mentioning features or use of this software -+ * must display the following acknowledgement: -+ * This product includes software developed by the NetBSD -+ * Foundation, Inc. and its contributors. -+ * 4. Neither the name of The NetBSD Foundation nor the names of its -+ * contributors may be used to endorse or promote products derived -+ * from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS -+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED -+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS -+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -+ * POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+/* Modified by Synopsys, Inc, 12/12/2007 */ -+ -+ -+#ifndef _USB_H_ -+#define _USB_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/* -+ * The USB records contain some unaligned little-endian word -+ * components. The U[SG]ETW macros take care of both the alignment -+ * and endian problem and should always be used to access non-byte -+ * values. -+ */ -+typedef u_int8_t uByte; -+typedef u_int8_t uWord[2]; -+typedef u_int8_t uDWord[4]; -+ -+#define USETW2(w,h,l) ((w)[0] = (u_int8_t)(l), (w)[1] = (u_int8_t)(h)) -+#define UCONSTW(x) { (x) & 0xff, ((x) >> 8) & 0xff } -+#define UCONSTDW(x) { (x) & 0xff, ((x) >> 8) & 0xff, \ -+ ((x) >> 16) & 0xff, ((x) >> 24) & 0xff } -+ -+#if 1 -+#define UGETW(w) ((w)[0] | ((w)[1] << 8)) -+#define USETW(w,v) ((w)[0] = (u_int8_t)(v), (w)[1] = (u_int8_t)((v) >> 8)) -+#define UGETDW(w) ((w)[0] | ((w)[1] << 8) | ((w)[2] << 16) | ((w)[3] << 24)) -+#define USETDW(w,v) ((w)[0] = (u_int8_t)(v), \ -+ (w)[1] = (u_int8_t)((v) >> 8), \ -+ (w)[2] = (u_int8_t)((v) >> 16), \ -+ (w)[3] = (u_int8_t)((v) >> 24)) -+#else -+/* -+ * On little-endian machines that can handle unanliged accesses -+ * (e.g. i386) these macros can be replaced by the following. -+ */ -+#define UGETW(w) (*(u_int16_t *)(w)) -+#define USETW(w,v) (*(u_int16_t *)(w) = (v)) -+#define UGETDW(w) (*(u_int32_t *)(w)) -+#define USETDW(w,v) (*(u_int32_t *)(w) = (v)) -+#endif -+ -+/* -+ * Macros for accessing UAS IU fields, which are big-endian -+ */ -+#define IUSETW2(w,h,l) ((w)[0] = (u_int8_t)(h), (w)[1] = (u_int8_t)(l)) -+#define IUCONSTW(x) { ((x) >> 8) & 0xff, (x) & 0xff } -+#define IUCONSTDW(x) { ((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \ -+ ((x) >> 8) & 0xff, (x) & 0xff } -+#define IUGETW(w) (((w)[0] << 8) | (w)[1]) -+#define IUSETW(w,v) ((w)[0] = (u_int8_t)((v) >> 8), (w)[1] = (u_int8_t)(v)) -+#define IUGETDW(w) (((w)[0] << 24) | ((w)[1] << 16) | ((w)[2] << 8) | (w)[3]) -+#define IUSETDW(w,v) ((w)[0] = (u_int8_t)((v) >> 24), \ -+ (w)[1] = (u_int8_t)((v) >> 16), \ -+ (w)[2] = (u_int8_t)((v) >> 8), \ -+ (w)[3] = (u_int8_t)(v)) -+ -+#define UPACKED __attribute__((__packed__)) -+ -+typedef struct { -+ uByte bmRequestType; -+ uByte bRequest; -+ uWord wValue; -+ uWord wIndex; -+ uWord wLength; -+} UPACKED usb_device_request_t; -+ -+#define UT_GET_DIR(a) ((a) & 0x80) -+#define UT_WRITE 0x00 -+#define UT_READ 0x80 -+ -+#define UT_GET_TYPE(a) ((a) & 0x60) -+#define UT_STANDARD 0x00 -+#define UT_CLASS 0x20 -+#define UT_VENDOR 0x40 -+ -+#define UT_GET_RECIPIENT(a) ((a) & 0x1f) -+#define UT_DEVICE 0x00 -+#define UT_INTERFACE 0x01 -+#define UT_ENDPOINT 0x02 -+#define UT_OTHER 0x03 -+ -+#define UT_READ_DEVICE (UT_READ | UT_STANDARD | UT_DEVICE) -+#define UT_READ_INTERFACE (UT_READ | UT_STANDARD | UT_INTERFACE) -+#define UT_READ_ENDPOINT (UT_READ | UT_STANDARD | UT_ENDPOINT) -+#define UT_WRITE_DEVICE (UT_WRITE | UT_STANDARD | UT_DEVICE) -+#define UT_WRITE_INTERFACE (UT_WRITE | UT_STANDARD | UT_INTERFACE) -+#define UT_WRITE_ENDPOINT (UT_WRITE | UT_STANDARD | UT_ENDPOINT) -+#define UT_READ_CLASS_DEVICE (UT_READ | UT_CLASS | UT_DEVICE) -+#define UT_READ_CLASS_INTERFACE (UT_READ | UT_CLASS | UT_INTERFACE) -+#define UT_READ_CLASS_OTHER (UT_READ | UT_CLASS | UT_OTHER) -+#define UT_READ_CLASS_ENDPOINT (UT_READ | UT_CLASS | UT_ENDPOINT) -+#define UT_WRITE_CLASS_DEVICE (UT_WRITE | UT_CLASS | UT_DEVICE) -+#define UT_WRITE_CLASS_INTERFACE (UT_WRITE | UT_CLASS | UT_INTERFACE) -+#define UT_WRITE_CLASS_OTHER (UT_WRITE | UT_CLASS | UT_OTHER) -+#define UT_WRITE_CLASS_ENDPOINT (UT_WRITE | UT_CLASS | UT_ENDPOINT) -+#define UT_READ_VENDOR_DEVICE (UT_READ | UT_VENDOR | UT_DEVICE) -+#define UT_READ_VENDOR_INTERFACE (UT_READ | UT_VENDOR | UT_INTERFACE) -+#define UT_READ_VENDOR_OTHER (UT_READ | UT_VENDOR | UT_OTHER) -+#define UT_READ_VENDOR_ENDPOINT (UT_READ | UT_VENDOR | UT_ENDPOINT) -+#define UT_WRITE_VENDOR_DEVICE (UT_WRITE | UT_VENDOR | UT_DEVICE) -+#define UT_WRITE_VENDOR_INTERFACE (UT_WRITE | UT_VENDOR | UT_INTERFACE) -+#define UT_WRITE_VENDOR_OTHER (UT_WRITE | UT_VENDOR | UT_OTHER) -+#define UT_WRITE_VENDOR_ENDPOINT (UT_WRITE | UT_VENDOR | UT_ENDPOINT) -+ -+/* Requests */ -+#define UR_GET_STATUS 0x00 -+#define USTAT_STANDARD_STATUS 0x00 -+#define WUSTAT_WUSB_FEATURE 0x01 -+#define WUSTAT_CHANNEL_INFO 0x02 -+#define WUSTAT_RECEIVED_DATA 0x03 -+#define WUSTAT_MAS_AVAILABILITY 0x04 -+#define WUSTAT_CURRENT_TRANSMIT_POWER 0x05 -+#define UR_CLEAR_FEATURE 0x01 -+#define UR_SET_FEATURE 0x03 -+#define UR_SET_AND_TEST_FEATURE 0x0c -+#define UR_SET_ADDRESS 0x05 -+#define UR_GET_DESCRIPTOR 0x06 -+#define UDESC_DEVICE 0x01 -+#define UDESC_CONFIG 0x02 -+#define UDESC_STRING 0x03 -+#define UDESC_INTERFACE 0x04 -+#define UDESC_ENDPOINT 0x05 -+#define UDESC_SS_USB_COMPANION 0x30 -+#define UDESC_DEVICE_QUALIFIER 0x06 -+#define UDESC_OTHER_SPEED_CONFIGURATION 0x07 -+#define UDESC_INTERFACE_POWER 0x08 -+#define UDESC_OTG 0x09 -+#define WUDESC_SECURITY 0x0c -+#define WUDESC_KEY 0x0d -+#define WUD_GET_KEY_INDEX(_wValue_) ((_wValue_) & 0xf) -+#define WUD_GET_KEY_TYPE(_wValue_) (((_wValue_) & 0x30) >> 4) -+#define WUD_KEY_TYPE_ASSOC 0x01 -+#define WUD_KEY_TYPE_GTK 0x02 -+#define WUD_GET_KEY_ORIGIN(_wValue_) (((_wValue_) & 0x40) >> 6) -+#define WUD_KEY_ORIGIN_HOST 0x00 -+#define WUD_KEY_ORIGIN_DEVICE 0x01 -+#define WUDESC_ENCRYPTION_TYPE 0x0e -+#define WUDESC_BOS 0x0f -+#define WUDESC_DEVICE_CAPABILITY 0x10 -+#define WUDESC_WIRELESS_ENDPOINT_COMPANION 0x11 -+#define UDESC_BOS 0x0f -+#define UDESC_DEVICE_CAPABILITY 0x10 -+#define UDESC_CS_DEVICE 0x21 /* class specific */ -+#define UDESC_CS_CONFIG 0x22 -+#define UDESC_CS_STRING 0x23 -+#define UDESC_CS_INTERFACE 0x24 -+#define UDESC_CS_ENDPOINT 0x25 -+#define UDESC_HUB 0x29 -+#define UR_SET_DESCRIPTOR 0x07 -+#define UR_GET_CONFIG 0x08 -+#define UR_SET_CONFIG 0x09 -+#define UR_GET_INTERFACE 0x0a -+#define UR_SET_INTERFACE 0x0b -+#define UR_SYNCH_FRAME 0x0c -+#define WUR_SET_ENCRYPTION 0x0d -+#define WUR_GET_ENCRYPTION 0x0e -+#define WUR_SET_HANDSHAKE 0x0f -+#define WUR_GET_HANDSHAKE 0x10 -+#define WUR_SET_CONNECTION 0x11 -+#define WUR_SET_SECURITY_DATA 0x12 -+#define WUR_GET_SECURITY_DATA 0x13 -+#define WUR_SET_WUSB_DATA 0x14 -+#define WUDATA_DRPIE_INFO 0x01 -+#define WUDATA_TRANSMIT_DATA 0x02 -+#define WUDATA_TRANSMIT_PARAMS 0x03 -+#define WUDATA_RECEIVE_PARAMS 0x04 -+#define WUDATA_TRANSMIT_POWER 0x05 -+#define WUR_LOOPBACK_DATA_WRITE 0x15 -+#define WUR_LOOPBACK_DATA_READ 0x16 -+#define WUR_SET_INTERFACE_DS 0x17 -+ -+/* Feature numbers */ -+#define UF_ENDPOINT_HALT 0 -+#define UF_DEVICE_REMOTE_WAKEUP 1 -+#define UF_TEST_MODE 2 -+#define UF_DEVICE_B_HNP_ENABLE 3 -+#define UF_DEVICE_A_HNP_SUPPORT 4 -+#define UF_DEVICE_A_ALT_HNP_SUPPORT 5 -+#define WUF_WUSB 3 -+#define WUF_TX_DRPIE 0x0 -+#define WUF_DEV_XMIT_PACKET 0x1 -+#define WUF_COUNT_PACKETS 0x2 -+#define WUF_CAPTURE_PACKETS 0x3 -+#define UF_FUNCTION_SUSPEND 0 -+#define UF_U1_ENABLE 48 -+#define UF_U2_ENABLE 49 -+#define UF_LTM_ENABLE 50 -+ -+/* Class requests from the USB 2.0 hub spec, table 11-15 */ -+#define UCR_CLEAR_HUB_FEATURE (0x2000 | UR_CLEAR_FEATURE) -+#define UCR_CLEAR_PORT_FEATURE (0x2300 | UR_CLEAR_FEATURE) -+#define UCR_GET_HUB_DESCRIPTOR (0xa000 | UR_GET_DESCRIPTOR) -+#define UCR_GET_HUB_STATUS (0xa000 | UR_GET_STATUS) -+#define UCR_GET_PORT_STATUS (0xa300 | UR_GET_STATUS) -+#define UCR_SET_HUB_FEATURE (0x2000 | UR_SET_FEATURE) -+#define UCR_SET_PORT_FEATURE (0x2300 | UR_SET_FEATURE) -+#define UCR_SET_AND_TEST_PORT_FEATURE (0xa300 | UR_SET_AND_TEST_FEATURE) -+ -+#ifdef _MSC_VER -+#include -+#endif -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bDescriptorSubtype; -+} UPACKED usb_descriptor_t; -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+} UPACKED usb_descriptor_header_t; -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+ uWord bcdUSB; -+#define UD_USB_2_0 0x0200 -+#define UD_IS_USB2(d) (UGETW((d)->bcdUSB) >= UD_USB_2_0) -+ uByte bDeviceClass; -+ uByte bDeviceSubClass; -+ uByte bDeviceProtocol; -+ uByte bMaxPacketSize; -+ /* The fields below are not part of the initial descriptor. */ -+ uWord idVendor; -+ uWord idProduct; -+ uWord bcdDevice; -+ uByte iManufacturer; -+ uByte iProduct; -+ uByte iSerialNumber; -+ uByte bNumConfigurations; -+} UPACKED usb_device_descriptor_t; -+#define USB_DEVICE_DESCRIPTOR_SIZE 18 -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+ uWord wTotalLength; -+ uByte bNumInterface; -+ uByte bConfigurationValue; -+ uByte iConfiguration; -+#define UC_ATT_ONE (1 << 7) /* must be set */ -+#define UC_ATT_SELFPOWER (1 << 6) /* self powered */ -+#define UC_ATT_WAKEUP (1 << 5) /* can wakeup */ -+#define UC_ATT_BATTERY (1 << 4) /* battery powered */ -+ uByte bmAttributes; -+#define UC_BUS_POWERED 0x80 -+#define UC_SELF_POWERED 0x40 -+#define UC_REMOTE_WAKEUP 0x20 -+ uByte bMaxPower; /* max current in 2 mA units */ -+#define UC_POWER_FACTOR 2 -+} UPACKED usb_config_descriptor_t; -+#define USB_CONFIG_DESCRIPTOR_SIZE 9 -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bInterfaceNumber; -+ uByte bAlternateSetting; -+ uByte bNumEndpoints; -+ uByte bInterfaceClass; -+ uByte bInterfaceSubClass; -+ uByte bInterfaceProtocol; -+ uByte iInterface; -+} UPACKED usb_interface_descriptor_t; -+#define USB_INTERFACE_DESCRIPTOR_SIZE 9 -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bEndpointAddress; -+#define UE_GET_DIR(a) ((a) & 0x80) -+#define UE_SET_DIR(a,d) ((a) | (((d)&1) << 7)) -+#define UE_DIR_IN 0x80 -+#define UE_DIR_OUT 0x00 -+#define UE_ADDR 0x0f -+#define UE_GET_ADDR(a) ((a) & UE_ADDR) -+ uByte bmAttributes; -+#define UE_XFERTYPE 0x03 -+#define UE_CONTROL 0x00 -+#define UE_ISOCHRONOUS 0x01 -+#define UE_BULK 0x02 -+#define UE_INTERRUPT 0x03 -+#define UE_GET_XFERTYPE(a) ((a) & UE_XFERTYPE) -+#define UE_ISO_TYPE 0x0c -+#define UE_ISO_ASYNC 0x04 -+#define UE_ISO_ADAPT 0x08 -+#define UE_ISO_SYNC 0x0c -+#define UE_GET_ISO_TYPE(a) ((a) & UE_ISO_TYPE) -+ uWord wMaxPacketSize; -+ uByte bInterval; -+} UPACKED usb_endpoint_descriptor_t; -+#define USB_ENDPOINT_DESCRIPTOR_SIZE 7 -+ -+typedef struct ss_endpoint_companion_descriptor { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bMaxBurst; -+#define USSE_GET_MAX_STREAMS(a) ((a) & 0x1f) -+#define USSE_SET_MAX_STREAMS(a, b) ((a) | ((b) & 0x1f)) -+#define USSE_GET_MAX_PACKET_NUM(a) ((a) & 0x03) -+#define USSE_SET_MAX_PACKET_NUM(a, b) ((a) | ((b) & 0x03)) -+ uByte bmAttributes; -+ uWord wBytesPerInterval; -+} UPACKED ss_endpoint_companion_descriptor_t; -+#define USB_SS_ENDPOINT_COMPANION_DESCRIPTOR_SIZE 6 -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+ uWord bString[127]; -+} UPACKED usb_string_descriptor_t; -+#define USB_MAX_STRING_LEN 128 -+#define USB_LANGUAGE_TABLE 0 /* # of the string language id table */ -+ -+/* Hub specific request */ -+#define UR_GET_BUS_STATE 0x02 -+#define UR_CLEAR_TT_BUFFER 0x08 -+#define UR_RESET_TT 0x09 -+#define UR_GET_TT_STATE 0x0a -+#define UR_STOP_TT 0x0b -+ -+/* Hub features */ -+#define UHF_C_HUB_LOCAL_POWER 0 -+#define UHF_C_HUB_OVER_CURRENT 1 -+#define UHF_PORT_CONNECTION 0 -+#define UHF_PORT_ENABLE 1 -+#define UHF_PORT_SUSPEND 2 -+#define UHF_PORT_OVER_CURRENT 3 -+#define UHF_PORT_RESET 4 -+#define UHF_PORT_L1 5 -+#define UHF_PORT_POWER 8 -+#define UHF_PORT_LOW_SPEED 9 -+#define UHF_PORT_HIGH_SPEED 10 -+#define UHF_C_PORT_CONNECTION 16 -+#define UHF_C_PORT_ENABLE 17 -+#define UHF_C_PORT_SUSPEND 18 -+#define UHF_C_PORT_OVER_CURRENT 19 -+#define UHF_C_PORT_RESET 20 -+#define UHF_C_PORT_L1 23 -+#define UHF_PORT_TEST 21 -+#define UHF_PORT_INDICATOR 22 -+ -+typedef struct { -+ uByte bDescLength; -+ uByte bDescriptorType; -+ uByte bNbrPorts; -+ uWord wHubCharacteristics; -+#define UHD_PWR 0x0003 -+#define UHD_PWR_GANGED 0x0000 -+#define UHD_PWR_INDIVIDUAL 0x0001 -+#define UHD_PWR_NO_SWITCH 0x0002 -+#define UHD_COMPOUND 0x0004 -+#define UHD_OC 0x0018 -+#define UHD_OC_GLOBAL 0x0000 -+#define UHD_OC_INDIVIDUAL 0x0008 -+#define UHD_OC_NONE 0x0010 -+#define UHD_TT_THINK 0x0060 -+#define UHD_TT_THINK_8 0x0000 -+#define UHD_TT_THINK_16 0x0020 -+#define UHD_TT_THINK_24 0x0040 -+#define UHD_TT_THINK_32 0x0060 -+#define UHD_PORT_IND 0x0080 -+ uByte bPwrOn2PwrGood; /* delay in 2 ms units */ -+#define UHD_PWRON_FACTOR 2 -+ uByte bHubContrCurrent; -+ uByte DeviceRemovable[32]; /* max 255 ports */ -+#define UHD_NOT_REMOV(desc, i) \ -+ (((desc)->DeviceRemovable[(i)/8] >> ((i) % 8)) & 1) -+ /* deprecated */ uByte PortPowerCtrlMask[1]; -+} UPACKED usb_hub_descriptor_t; -+#define USB_HUB_DESCRIPTOR_SIZE 9 /* includes deprecated PortPowerCtrlMask */ -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+ uWord bcdUSB; -+ uByte bDeviceClass; -+ uByte bDeviceSubClass; -+ uByte bDeviceProtocol; -+ uByte bMaxPacketSize0; -+ uByte bNumConfigurations; -+ uByte bReserved; -+} UPACKED usb_device_qualifier_t; -+#define USB_DEVICE_QUALIFIER_SIZE 10 -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bmAttributes; -+#define UOTG_SRP 0x01 -+#define UOTG_HNP 0x02 -+} UPACKED usb_otg_descriptor_t; -+ -+/* OTG feature selectors */ -+#define UOTG_B_HNP_ENABLE 3 -+#define UOTG_A_HNP_SUPPORT 4 -+#define UOTG_A_ALT_HNP_SUPPORT 5 -+ -+typedef struct { -+ uWord wStatus; -+/* Device status flags */ -+#define UDS_SELF_POWERED 0x0001 -+#define UDS_REMOTE_WAKEUP 0x0002 -+/* Endpoint status flags */ -+#define UES_HALT 0x0001 -+} UPACKED usb_status_t; -+ -+typedef struct { -+ uWord wHubStatus; -+#define UHS_LOCAL_POWER 0x0001 -+#define UHS_OVER_CURRENT 0x0002 -+ uWord wHubChange; -+} UPACKED usb_hub_status_t; -+ -+typedef struct { -+ uWord wPortStatus; -+#define UPS_CURRENT_CONNECT_STATUS 0x0001 -+#define UPS_PORT_ENABLED 0x0002 -+#define UPS_SUSPEND 0x0004 -+#define UPS_OVERCURRENT_INDICATOR 0x0008 -+#define UPS_RESET 0x0010 -+#define UPS_PORT_POWER 0x0100 -+#define UPS_LOW_SPEED 0x0200 -+#define UPS_HIGH_SPEED 0x0400 -+#define UPS_PORT_TEST 0x0800 -+#define UPS_PORT_INDICATOR 0x1000 -+ uWord wPortChange; -+#define UPS_C_CONNECT_STATUS 0x0001 -+#define UPS_C_PORT_ENABLED 0x0002 -+#define UPS_C_SUSPEND 0x0004 -+#define UPS_C_OVERCURRENT_INDICATOR 0x0008 -+#define UPS_C_PORT_RESET 0x0010 -+} UPACKED usb_port_status_t; -+ -+#ifdef _MSC_VER -+#include -+#endif -+ -+/* Device class codes */ -+#define UDCLASS_IN_INTERFACE 0x00 -+#define UDCLASS_COMM 0x02 -+#define UDCLASS_HUB 0x09 -+#define UDSUBCLASS_HUB 0x00 -+#define UDPROTO_FSHUB 0x00 -+#define UDPROTO_HSHUBSTT 0x01 -+#define UDPROTO_HSHUBMTT 0x02 -+#define UDCLASS_DIAGNOSTIC 0xdc -+#define UDCLASS_WIRELESS 0xe0 -+#define UDSUBCLASS_RF 0x01 -+#define UDPROTO_BLUETOOTH 0x01 -+#define UDCLASS_VENDOR 0xff -+ -+/* Interface class codes */ -+#define UICLASS_UNSPEC 0x00 -+ -+#define UICLASS_AUDIO 0x01 -+#define UISUBCLASS_AUDIOCONTROL 1 -+#define UISUBCLASS_AUDIOSTREAM 2 -+#define UISUBCLASS_MIDISTREAM 3 -+ -+#define UICLASS_CDC 0x02 /* communication */ -+#define UISUBCLASS_DIRECT_LINE_CONTROL_MODEL 1 -+#define UISUBCLASS_ABSTRACT_CONTROL_MODEL 2 -+#define UISUBCLASS_TELEPHONE_CONTROL_MODEL 3 -+#define UISUBCLASS_MULTICHANNEL_CONTROL_MODEL 4 -+#define UISUBCLASS_CAPI_CONTROLMODEL 5 -+#define UISUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL 6 -+#define UISUBCLASS_ATM_NETWORKING_CONTROL_MODEL 7 -+#define UIPROTO_CDC_AT 1 -+ -+#define UICLASS_HID 0x03 -+#define UISUBCLASS_BOOT 1 -+#define UIPROTO_BOOT_KEYBOARD 1 -+ -+#define UICLASS_PHYSICAL 0x05 -+ -+#define UICLASS_IMAGE 0x06 -+ -+#define UICLASS_PRINTER 0x07 -+#define UISUBCLASS_PRINTER 1 -+#define UIPROTO_PRINTER_UNI 1 -+#define UIPROTO_PRINTER_BI 2 -+#define UIPROTO_PRINTER_1284 3 -+ -+#define UICLASS_MASS 0x08 -+#define UISUBCLASS_RBC 1 -+#define UISUBCLASS_SFF8020I 2 -+#define UISUBCLASS_QIC157 3 -+#define UISUBCLASS_UFI 4 -+#define UISUBCLASS_SFF8070I 5 -+#define UISUBCLASS_SCSI 6 -+#define UIPROTO_MASS_CBI_I 0 -+#define UIPROTO_MASS_CBI 1 -+#define UIPROTO_MASS_BBB_OLD 2 /* Not in the spec anymore */ -+#define UIPROTO_MASS_BBB 80 /* 'P' for the Iomega Zip drive */ -+ -+#define UICLASS_HUB 0x09 -+#define UISUBCLASS_HUB 0 -+#define UIPROTO_FSHUB 0 -+#define UIPROTO_HSHUBSTT 0 /* Yes, same as previous */ -+#define UIPROTO_HSHUBMTT 1 -+ -+#define UICLASS_CDC_DATA 0x0a -+#define UISUBCLASS_DATA 0 -+#define UIPROTO_DATA_ISDNBRI 0x30 /* Physical iface */ -+#define UIPROTO_DATA_HDLC 0x31 /* HDLC */ -+#define UIPROTO_DATA_TRANSPARENT 0x32 /* Transparent */ -+#define UIPROTO_DATA_Q921M 0x50 /* Management for Q921 */ -+#define UIPROTO_DATA_Q921 0x51 /* Data for Q921 */ -+#define UIPROTO_DATA_Q921TM 0x52 /* TEI multiplexer for Q921 */ -+#define UIPROTO_DATA_V42BIS 0x90 /* Data compression */ -+#define UIPROTO_DATA_Q931 0x91 /* Euro-ISDN */ -+#define UIPROTO_DATA_V120 0x92 /* V.24 rate adaption */ -+#define UIPROTO_DATA_CAPI 0x93 /* CAPI 2.0 commands */ -+#define UIPROTO_DATA_HOST_BASED 0xfd /* Host based driver */ -+#define UIPROTO_DATA_PUF 0xfe /* see Prot. Unit Func. Desc.*/ -+#define UIPROTO_DATA_VENDOR 0xff /* Vendor specific */ -+ -+#define UICLASS_SMARTCARD 0x0b -+ -+/*#define UICLASS_FIRM_UPD 0x0c*/ -+ -+#define UICLASS_SECURITY 0x0d -+ -+#define UICLASS_DIAGNOSTIC 0xdc -+ -+#define UICLASS_WIRELESS 0xe0 -+#define UISUBCLASS_RF 0x01 -+#define UIPROTO_BLUETOOTH 0x01 -+ -+#define UICLASS_APPL_SPEC 0xfe -+#define UISUBCLASS_FIRMWARE_DOWNLOAD 1 -+#define UISUBCLASS_IRDA 2 -+#define UIPROTO_IRDA 0 -+ -+#define UICLASS_VENDOR 0xff -+ -+#define USB_HUB_MAX_DEPTH 5 -+ -+/* -+ * Minimum time a device needs to be powered down to go through -+ * a power cycle. XXX Are these time in the spec? -+ */ -+#define USB_POWER_DOWN_TIME 200 /* ms */ -+#define USB_PORT_POWER_DOWN_TIME 100 /* ms */ -+ -+#if 0 -+/* These are the values from the spec. */ -+#define USB_PORT_RESET_DELAY 10 /* ms */ -+#define USB_PORT_ROOT_RESET_DELAY 50 /* ms */ -+#define USB_PORT_RESET_RECOVERY 10 /* ms */ -+#define USB_PORT_POWERUP_DELAY 100 /* ms */ -+#define USB_SET_ADDRESS_SETTLE 2 /* ms */ -+#define USB_RESUME_DELAY (20*5) /* ms */ -+#define USB_RESUME_WAIT 10 /* ms */ -+#define USB_RESUME_RECOVERY 10 /* ms */ -+#define USB_EXTRA_POWER_UP_TIME 0 /* ms */ -+#else -+/* Allow for marginal (i.e. non-conforming) devices. */ -+#define USB_PORT_RESET_DELAY 50 /* ms */ -+#define USB_PORT_ROOT_RESET_DELAY 250 /* ms */ -+#define USB_PORT_RESET_RECOVERY 250 /* ms */ -+#define USB_PORT_POWERUP_DELAY 300 /* ms */ -+#define USB_SET_ADDRESS_SETTLE 10 /* ms */ -+#define USB_RESUME_DELAY (50*5) /* ms */ -+#define USB_RESUME_WAIT 50 /* ms */ -+#define USB_RESUME_RECOVERY 50 /* ms */ -+#define USB_EXTRA_POWER_UP_TIME 20 /* ms */ -+#endif -+ -+#define USB_MIN_POWER 100 /* mA */ -+#define USB_MAX_POWER 500 /* mA */ -+ -+#define USB_BUS_RESET_DELAY 100 /* ms XXX?*/ -+ -+#define USB_UNCONFIG_NO 0 -+#define USB_UNCONFIG_INDEX (-1) -+ -+/*** ioctl() related stuff ***/ -+ -+struct usb_ctl_request { -+ int ucr_addr; -+ usb_device_request_t ucr_request; -+ void *ucr_data; -+ int ucr_flags; -+#define USBD_SHORT_XFER_OK 0x04 /* allow short reads */ -+ int ucr_actlen; /* actual length transferred */ -+}; -+ -+struct usb_alt_interface { -+ int uai_config_index; -+ int uai_interface_index; -+ int uai_alt_no; -+}; -+ -+#define USB_CURRENT_CONFIG_INDEX (-1) -+#define USB_CURRENT_ALT_INDEX (-1) -+ -+struct usb_config_desc { -+ int ucd_config_index; -+ usb_config_descriptor_t ucd_desc; -+}; -+ -+struct usb_interface_desc { -+ int uid_config_index; -+ int uid_interface_index; -+ int uid_alt_index; -+ usb_interface_descriptor_t uid_desc; -+}; -+ -+struct usb_endpoint_desc { -+ int ued_config_index; -+ int ued_interface_index; -+ int ued_alt_index; -+ int ued_endpoint_index; -+ usb_endpoint_descriptor_t ued_desc; -+}; -+ -+struct usb_full_desc { -+ int ufd_config_index; -+ u_int ufd_size; -+ u_char *ufd_data; -+}; -+ -+struct usb_string_desc { -+ int usd_string_index; -+ int usd_language_id; -+ usb_string_descriptor_t usd_desc; -+}; -+ -+struct usb_ctl_report_desc { -+ int ucrd_size; -+ u_char ucrd_data[1024]; /* filled data size will vary */ -+}; -+ -+typedef struct { u_int32_t cookie; } usb_event_cookie_t; -+ -+#define USB_MAX_DEVNAMES 4 -+#define USB_MAX_DEVNAMELEN 16 -+struct usb_device_info { -+ u_int8_t udi_bus; -+ u_int8_t udi_addr; /* device address */ -+ usb_event_cookie_t udi_cookie; -+ char udi_product[USB_MAX_STRING_LEN]; -+ char udi_vendor[USB_MAX_STRING_LEN]; -+ char udi_release[8]; -+ u_int16_t udi_productNo; -+ u_int16_t udi_vendorNo; -+ u_int16_t udi_releaseNo; -+ u_int8_t udi_class; -+ u_int8_t udi_subclass; -+ u_int8_t udi_protocol; -+ u_int8_t udi_config; -+ u_int8_t udi_speed; -+#define USB_SPEED_UNKNOWN 0 -+#define USB_SPEED_LOW 1 -+#define USB_SPEED_FULL 2 -+#define USB_SPEED_HIGH 3 -+#define USB_SPEED_VARIABLE 4 -+#define USB_SPEED_SUPER 5 -+ int udi_power; /* power consumption in mA, 0 if selfpowered */ -+ int udi_nports; -+ char udi_devnames[USB_MAX_DEVNAMES][USB_MAX_DEVNAMELEN]; -+ u_int8_t udi_ports[16];/* hub only: addresses of devices on ports */ -+#define USB_PORT_ENABLED 0xff -+#define USB_PORT_SUSPENDED 0xfe -+#define USB_PORT_POWERED 0xfd -+#define USB_PORT_DISABLED 0xfc -+}; -+ -+struct usb_ctl_report { -+ int ucr_report; -+ u_char ucr_data[1024]; /* filled data size will vary */ -+}; -+ -+struct usb_device_stats { -+ u_long uds_requests[4]; /* indexed by transfer type UE_* */ -+}; -+ -+#define WUSB_MIN_IE 0x80 -+#define WUSB_WCTA_IE 0x80 -+#define WUSB_WCONNECTACK_IE 0x81 -+#define WUSB_WHOSTINFO_IE 0x82 -+#define WUHI_GET_CA(_bmAttributes_) ((_bmAttributes_) & 0x3) -+#define WUHI_CA_RECONN 0x00 -+#define WUHI_CA_LIMITED 0x01 -+#define WUHI_CA_ALL 0x03 -+#define WUHI_GET_MLSI(_bmAttributes_) (((_bmAttributes_) & 0x38) >> 3) -+#define WUSB_WCHCHANGEANNOUNCE_IE 0x83 -+#define WUSB_WDEV_DISCONNECT_IE 0x84 -+#define WUSB_WHOST_DISCONNECT_IE 0x85 -+#define WUSB_WRELEASE_CHANNEL_IE 0x86 -+#define WUSB_WWORK_IE 0x87 -+#define WUSB_WCHANNEL_STOP_IE 0x88 -+#define WUSB_WDEV_KEEPALIVE_IE 0x89 -+#define WUSB_WISOCH_DISCARD_IE 0x8A -+#define WUSB_WRESETDEVICE_IE 0x8B -+#define WUSB_WXMIT_PACKET_ADJUST_IE 0x8C -+#define WUSB_MAX_IE 0x8C -+ -+/* Device Notification Types */ -+ -+#define WUSB_DN_MIN 0x01 -+#define WUSB_DN_CONNECT 0x01 -+# define WUSB_DA_OLDCONN 0x00 -+# define WUSB_DA_NEWCONN 0x01 -+# define WUSB_DA_SELF_BEACON 0x02 -+# define WUSB_DA_DIR_BEACON 0x04 -+# define WUSB_DA_NO_BEACON 0x06 -+#define WUSB_DN_DISCONNECT 0x02 -+#define WUSB_DN_EPRDY 0x03 -+#define WUSB_DN_MASAVAILCHANGED 0x04 -+#define WUSB_DN_REMOTEWAKEUP 0x05 -+#define WUSB_DN_SLEEP 0x06 -+#define WUSB_DN_ALIVE 0x07 -+#define WUSB_DN_MAX 0x07 -+ -+#ifdef _MSC_VER -+#include -+#endif -+ -+/* WUSB Handshake Data. Used during the SET/GET HANDSHAKE requests */ -+typedef struct wusb_hndshk_data { -+ uByte bMessageNumber; -+ uByte bStatus; -+ uByte tTKID[3]; -+ uByte bReserved; -+ uByte CDID[16]; -+ uByte Nonce[16]; -+ uByte MIC[8]; -+} UPACKED wusb_hndshk_data_t; -+#define WUSB_HANDSHAKE_LEN_FOR_MIC 38 -+ -+/* WUSB Connection Context */ -+typedef struct wusb_conn_context { -+ uByte CHID [16]; -+ uByte CDID [16]; -+ uByte CK [16]; -+} UPACKED wusb_conn_context_t; -+ -+/* WUSB Security Descriptor */ -+typedef struct wusb_security_desc { -+ uByte bLength; -+ uByte bDescriptorType; -+ uWord wTotalLength; -+ uByte bNumEncryptionTypes; -+} UPACKED wusb_security_desc_t; -+ -+/* WUSB Encryption Type Descriptor */ -+typedef struct wusb_encrypt_type_desc { -+ uByte bLength; -+ uByte bDescriptorType; -+ -+ uByte bEncryptionType; -+#define WUETD_UNSECURE 0 -+#define WUETD_WIRED 1 -+#define WUETD_CCM_1 2 -+#define WUETD_RSA_1 3 -+ -+ uByte bEncryptionValue; -+ uByte bAuthKeyIndex; -+} UPACKED wusb_encrypt_type_desc_t; -+ -+/* WUSB Key Descriptor */ -+typedef struct wusb_key_desc { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte tTKID[3]; -+ uByte bReserved; -+ uByte KeyData[1]; /* variable length */ -+} UPACKED wusb_key_desc_t; -+ -+/* WUSB BOS Descriptor (Binary device Object Store) */ -+typedef struct wusb_bos_desc { -+ uByte bLength; -+ uByte bDescriptorType; -+ uWord wTotalLength; -+ uByte bNumDeviceCaps; -+} UPACKED wusb_bos_desc_t; -+ -+#define USB_DEVICE_CAPABILITY_20_EXTENSION 0x02 -+typedef struct usb_dev_cap_20_ext_desc { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bDevCapabilityType; -+#define USB_20_EXT_LPM 0x02 -+ uDWord bmAttributes; -+} UPACKED usb_dev_cap_20_ext_desc_t; -+ -+#define USB_DEVICE_CAPABILITY_SS_USB 0x03 -+typedef struct usb_dev_cap_ss_usb { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bDevCapabilityType; -+#define USB_DC_SS_USB_LTM_CAPABLE 0x02 -+ uByte bmAttributes; -+#define USB_DC_SS_USB_SPEED_SUPPORT_LOW 0x01 -+#define USB_DC_SS_USB_SPEED_SUPPORT_FULL 0x02 -+#define USB_DC_SS_USB_SPEED_SUPPORT_HIGH 0x04 -+#define USB_DC_SS_USB_SPEED_SUPPORT_SS 0x08 -+ uWord wSpeedsSupported; -+ uByte bFunctionalitySupport; -+ uByte bU1DevExitLat; -+ uWord wU2DevExitLat; -+} UPACKED usb_dev_cap_ss_usb_t; -+ -+#define USB_DEVICE_CAPABILITY_CONTAINER_ID 0x04 -+typedef struct usb_dev_cap_container_id { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bDevCapabilityType; -+ uByte bReserved; -+ uByte containerID[16]; -+} UPACKED usb_dev_cap_container_id_t; -+ -+/* Device Capability Type Codes */ -+#define WUSB_DEVICE_CAPABILITY_WIRELESS_USB 0x01 -+ -+/* Device Capability Descriptor */ -+typedef struct wusb_dev_cap_desc { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bDevCapabilityType; -+ uByte caps[1]; /* Variable length */ -+} UPACKED wusb_dev_cap_desc_t; -+ -+/* Device Capability Descriptor */ -+typedef struct wusb_dev_cap_uwb_desc { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bDevCapabilityType; -+ uByte bmAttributes; -+ uWord wPHYRates; /* Bitmap */ -+ uByte bmTFITXPowerInfo; -+ uByte bmFFITXPowerInfo; -+ uWord bmBandGroup; -+ uByte bReserved; -+} UPACKED wusb_dev_cap_uwb_desc_t; -+ -+/* Wireless USB Endpoint Companion Descriptor */ -+typedef struct wusb_endpoint_companion_desc { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bMaxBurst; -+ uByte bMaxSequence; -+ uWord wMaxStreamDelay; -+ uWord wOverTheAirPacketSize; -+ uByte bOverTheAirInterval; -+ uByte bmCompAttributes; -+} UPACKED wusb_endpoint_companion_desc_t; -+ -+/* Wireless USB Numeric Association M1 Data Structure */ -+typedef struct wusb_m1_data { -+ uByte version; -+ uWord langId; -+ uByte deviceFriendlyNameLength; -+ uByte sha_256_m3[32]; -+ uByte deviceFriendlyName[256]; -+} UPACKED wusb_m1_data_t; -+ -+typedef struct wusb_m2_data { -+ uByte version; -+ uWord langId; -+ uByte hostFriendlyNameLength; -+ uByte pkh[384]; -+ uByte hostFriendlyName[256]; -+} UPACKED wusb_m2_data_t; -+ -+typedef struct wusb_m3_data { -+ uByte pkd[384]; -+ uByte nd; -+} UPACKED wusb_m3_data_t; -+ -+typedef struct wusb_m4_data { -+ uDWord _attributeTypeIdAndLength_1; -+ uWord associationTypeId; -+ -+ uDWord _attributeTypeIdAndLength_2; -+ uWord associationSubTypeId; -+ -+ uDWord _attributeTypeIdAndLength_3; -+ uDWord length; -+ -+ uDWord _attributeTypeIdAndLength_4; -+ uDWord associationStatus; -+ -+ uDWord _attributeTypeIdAndLength_5; -+ uByte chid[16]; -+ -+ uDWord _attributeTypeIdAndLength_6; -+ uByte cdid[16]; -+ -+ uDWord _attributeTypeIdAndLength_7; -+ uByte bandGroups[2]; -+} UPACKED wusb_m4_data_t; -+ -+#ifdef _MSC_VER -+#include -+#endif -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _USB_H_ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/Makefile -@@ -0,0 +1,82 @@ -+# -+# Makefile for DWC_otg Highspeed USB controller driver -+# -+ -+ifneq ($(KERNELRELEASE),) -+ -+# Use the BUS_INTERFACE variable to compile the software for either -+# PCI(PCI_INTERFACE) or LM(LM_INTERFACE) bus. -+ifeq ($(BUS_INTERFACE),) -+# BUS_INTERFACE = -DPCI_INTERFACE -+# BUS_INTERFACE = -DLM_INTERFACE -+ BUS_INTERFACE = -DPLATFORM_INTERFACE -+endif -+ -+#ccflags-y += -DDEBUG -+#ccflags-y += -DDWC_OTG_DEBUGLEV=1 # reduce common debug msgs -+ -+# Use one of the following flags to compile the software in host-only or -+# device-only mode. -+#ccflags-y += -DDWC_HOST_ONLY -+#ccflags-y += -DDWC_DEVICE_ONLY -+ -+ccflags-y += -Dlinux -DDWC_HS_ELECT_TST -+#ccflags-y += -DDWC_EN_ISOC -+ccflags-y += -I$(obj)/../dwc_common_port -+#ccflags-y += -I$(PORTLIB) -+ccflags-y += -DDWC_LINUX -+ccflags-y += $(CFI) -+ccflags-y += $(BUS_INTERFACE) -+#ccflags-y += -DDWC_DEV_SRPCAP -+ -+obj-$(CONFIG_USB_DWCOTG) += dwc_otg.o -+ -+dwc_otg-objs := dwc_otg_driver.o dwc_otg_attr.o -+dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o -+dwc_otg-objs += dwc_otg_pcd_linux.o dwc_otg_pcd.o dwc_otg_pcd_intr.o -+dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_linux.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o dwc_otg_hcd_ddma.o -+dwc_otg-objs += dwc_otg_adp.o -+dwc_otg-objs += dwc_otg_fiq_fsm.o -+dwc_otg-objs += dwc_otg_fiq_stub.o -+ifneq ($(CFI),) -+dwc_otg-objs += dwc_otg_cfi.o -+endif -+ -+kernrelwd := $(subst ., ,$(KERNELRELEASE)) -+kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd)) -+ -+ifneq ($(kernrel3),2.6.20) -+ccflags-y += $(CPPFLAGS) -+endif -+ -+else -+ -+PWD := $(shell pwd) -+PORTLIB := $(PWD)/../dwc_common_port -+ -+# Command paths -+CTAGS := $(CTAGS) -+DOXYGEN := $(DOXYGEN) -+ -+default: portlib -+ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules -+ -+install: default -+ $(MAKE) -C$(KDIR) M=$(PORTLIB) modules_install -+ $(MAKE) -C$(KDIR) M=$(PWD) modules_install -+ -+portlib: -+ $(MAKE) -C$(KDIR) M=$(PORTLIB) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules -+ cp $(PORTLIB)/Module.symvers $(PWD)/ -+ -+docs: $(wildcard *.[hc]) doc/doxygen.cfg -+ $(DOXYGEN) doc/doxygen.cfg -+ -+tags: $(wildcard *.[hc]) -+ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) -+ -+ -+clean: -+ rm -rf *.o *.ko .*cmd *.mod.c .tmp_versions Module.symvers -+ -+endif ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/doc/doxygen.cfg -@@ -0,0 +1,224 @@ -+# Doxyfile 1.3.9.1 -+ -+#--------------------------------------------------------------------------- -+# Project related configuration options -+#--------------------------------------------------------------------------- -+PROJECT_NAME = "DesignWare USB 2.0 OTG Controller (DWC_otg) Device Driver" -+PROJECT_NUMBER = v3.00a -+OUTPUT_DIRECTORY = ./doc/ -+CREATE_SUBDIRS = NO -+OUTPUT_LANGUAGE = English -+BRIEF_MEMBER_DESC = YES -+REPEAT_BRIEF = YES -+ABBREVIATE_BRIEF = "The $name class" \ -+ "The $name widget" \ -+ "The $name file" \ -+ is \ -+ provides \ -+ specifies \ -+ contains \ -+ represents \ -+ a \ -+ an \ -+ the -+ALWAYS_DETAILED_SEC = NO -+INLINE_INHERITED_MEMB = NO -+FULL_PATH_NAMES = NO -+STRIP_FROM_PATH = -+STRIP_FROM_INC_PATH = -+SHORT_NAMES = NO -+JAVADOC_AUTOBRIEF = YES -+MULTILINE_CPP_IS_BRIEF = NO -+INHERIT_DOCS = YES -+DISTRIBUTE_GROUP_DOC = NO -+TAB_SIZE = 8 -+ALIASES = -+OPTIMIZE_OUTPUT_FOR_C = YES -+OPTIMIZE_OUTPUT_JAVA = NO -+SUBGROUPING = YES -+#--------------------------------------------------------------------------- -+# Build related configuration options -+#--------------------------------------------------------------------------- -+EXTRACT_ALL = NO -+EXTRACT_PRIVATE = YES -+EXTRACT_STATIC = YES -+EXTRACT_LOCAL_CLASSES = YES -+EXTRACT_LOCAL_METHODS = NO -+HIDE_UNDOC_MEMBERS = NO -+HIDE_UNDOC_CLASSES = NO -+HIDE_FRIEND_COMPOUNDS = NO -+HIDE_IN_BODY_DOCS = NO -+INTERNAL_DOCS = NO -+CASE_SENSE_NAMES = NO -+HIDE_SCOPE_NAMES = NO -+SHOW_INCLUDE_FILES = YES -+INLINE_INFO = YES -+SORT_MEMBER_DOCS = NO -+SORT_BRIEF_DOCS = NO -+SORT_BY_SCOPE_NAME = NO -+GENERATE_TODOLIST = YES -+GENERATE_TESTLIST = YES -+GENERATE_BUGLIST = YES -+GENERATE_DEPRECATEDLIST= YES -+ENABLED_SECTIONS = -+MAX_INITIALIZER_LINES = 30 -+SHOW_USED_FILES = YES -+SHOW_DIRECTORIES = YES -+#--------------------------------------------------------------------------- -+# configuration options related to warning and progress messages -+#--------------------------------------------------------------------------- -+QUIET = YES -+WARNINGS = YES -+WARN_IF_UNDOCUMENTED = NO -+WARN_IF_DOC_ERROR = YES -+WARN_FORMAT = "$file:$line: $text" -+WARN_LOGFILE = -+#--------------------------------------------------------------------------- -+# configuration options related to the input files -+#--------------------------------------------------------------------------- -+INPUT = . -+FILE_PATTERNS = *.c \ -+ *.h \ -+ ./linux/*.c \ -+ ./linux/*.h -+RECURSIVE = NO -+EXCLUDE = ./test/ \ -+ ./dwc_otg/.AppleDouble/ -+EXCLUDE_SYMLINKS = YES -+EXCLUDE_PATTERNS = *.mod.* -+EXAMPLE_PATH = -+EXAMPLE_PATTERNS = * -+EXAMPLE_RECURSIVE = NO -+IMAGE_PATH = -+INPUT_FILTER = -+FILTER_PATTERNS = -+FILTER_SOURCE_FILES = NO -+#--------------------------------------------------------------------------- -+# configuration options related to source browsing -+#--------------------------------------------------------------------------- -+SOURCE_BROWSER = YES -+INLINE_SOURCES = NO -+STRIP_CODE_COMMENTS = YES -+REFERENCED_BY_RELATION = NO -+REFERENCES_RELATION = NO -+VERBATIM_HEADERS = NO -+#--------------------------------------------------------------------------- -+# configuration options related to the alphabetical class index -+#--------------------------------------------------------------------------- -+ALPHABETICAL_INDEX = NO -+COLS_IN_ALPHA_INDEX = 5 -+IGNORE_PREFIX = -+#--------------------------------------------------------------------------- -+# configuration options related to the HTML output -+#--------------------------------------------------------------------------- -+GENERATE_HTML = YES -+HTML_OUTPUT = html -+HTML_FILE_EXTENSION = .html -+HTML_HEADER = -+HTML_FOOTER = -+HTML_STYLESHEET = -+HTML_ALIGN_MEMBERS = YES -+GENERATE_HTMLHELP = NO -+CHM_FILE = -+HHC_LOCATION = -+GENERATE_CHI = NO -+BINARY_TOC = NO -+TOC_EXPAND = NO -+DISABLE_INDEX = NO -+ENUM_VALUES_PER_LINE = 4 -+GENERATE_TREEVIEW = YES -+TREEVIEW_WIDTH = 250 -+#--------------------------------------------------------------------------- -+# configuration options related to the LaTeX output -+#--------------------------------------------------------------------------- -+GENERATE_LATEX = NO -+LATEX_OUTPUT = latex -+LATEX_CMD_NAME = latex -+MAKEINDEX_CMD_NAME = makeindex -+COMPACT_LATEX = NO -+PAPER_TYPE = a4wide -+EXTRA_PACKAGES = -+LATEX_HEADER = -+PDF_HYPERLINKS = NO -+USE_PDFLATEX = NO -+LATEX_BATCHMODE = NO -+LATEX_HIDE_INDICES = NO -+#--------------------------------------------------------------------------- -+# configuration options related to the RTF output -+#--------------------------------------------------------------------------- -+GENERATE_RTF = NO -+RTF_OUTPUT = rtf -+COMPACT_RTF = NO -+RTF_HYPERLINKS = NO -+RTF_STYLESHEET_FILE = -+RTF_EXTENSIONS_FILE = -+#--------------------------------------------------------------------------- -+# configuration options related to the man page output -+#--------------------------------------------------------------------------- -+GENERATE_MAN = NO -+MAN_OUTPUT = man -+MAN_EXTENSION = .3 -+MAN_LINKS = NO -+#--------------------------------------------------------------------------- -+# configuration options related to the XML output -+#--------------------------------------------------------------------------- -+GENERATE_XML = NO -+XML_OUTPUT = xml -+XML_SCHEMA = -+XML_DTD = -+XML_PROGRAMLISTING = YES -+#--------------------------------------------------------------------------- -+# configuration options for the AutoGen Definitions output -+#--------------------------------------------------------------------------- -+GENERATE_AUTOGEN_DEF = NO -+#--------------------------------------------------------------------------- -+# configuration options related to the Perl module output -+#--------------------------------------------------------------------------- -+GENERATE_PERLMOD = NO -+PERLMOD_LATEX = NO -+PERLMOD_PRETTY = YES -+PERLMOD_MAKEVAR_PREFIX = -+#--------------------------------------------------------------------------- -+# Configuration options related to the preprocessor -+#--------------------------------------------------------------------------- -+ENABLE_PREPROCESSING = YES -+MACRO_EXPANSION = YES -+EXPAND_ONLY_PREDEF = YES -+SEARCH_INCLUDES = YES -+INCLUDE_PATH = -+INCLUDE_FILE_PATTERNS = -+PREDEFINED = DEVICE_ATTR DWC_EN_ISOC -+EXPAND_AS_DEFINED = DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW DWC_OTG_DEVICE_ATTR_BITFIELD_STORE DWC_OTG_DEVICE_ATTR_BITFIELD_RW DWC_OTG_DEVICE_ATTR_BITFIELD_RO DWC_OTG_DEVICE_ATTR_REG_SHOW DWC_OTG_DEVICE_ATTR_REG_STORE DWC_OTG_DEVICE_ATTR_REG32_RW DWC_OTG_DEVICE_ATTR_REG32_RO DWC_EN_ISOC -+SKIP_FUNCTION_MACROS = NO -+#--------------------------------------------------------------------------- -+# Configuration::additions related to external references -+#--------------------------------------------------------------------------- -+TAGFILES = -+GENERATE_TAGFILE = -+ALLEXTERNALS = NO -+EXTERNAL_GROUPS = YES -+PERL_PATH = /usr/bin/perl -+#--------------------------------------------------------------------------- -+# Configuration options related to the dot tool -+#--------------------------------------------------------------------------- -+CLASS_DIAGRAMS = YES -+HIDE_UNDOC_RELATIONS = YES -+HAVE_DOT = NO -+CLASS_GRAPH = YES -+COLLABORATION_GRAPH = YES -+UML_LOOK = NO -+TEMPLATE_RELATIONS = NO -+INCLUDE_GRAPH = YES -+INCLUDED_BY_GRAPH = YES -+CALL_GRAPH = NO -+GRAPHICAL_HIERARCHY = YES -+DOT_IMAGE_FORMAT = png -+DOT_PATH = -+DOTFILE_DIRS = -+MAX_DOT_GRAPH_DEPTH = 1000 -+GENERATE_LEGEND = YES -+DOT_CLEANUP = YES -+#--------------------------------------------------------------------------- -+# Configuration::additions related to the search engine -+#--------------------------------------------------------------------------- -+SEARCHENGINE = NO ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dummy_audio.c -@@ -0,0 +1,1574 @@ -+/* -+ * zero.c -- Gadget Zero, for USB development -+ * -+ * Copyright (C) 2003-2004 David Brownell -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions, and the following disclaimer, -+ * without modification. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The names of the above-listed copyright holders may not be used -+ * to endorse or promote products derived from this software without -+ * specific prior written permission. -+ * -+ * ALTERNATIVELY, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") as published by the Free Software -+ * Foundation, either version 2 of that License or (at your option) any -+ * later version. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS -+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, -+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+ -+/* -+ * Gadget Zero only needs two bulk endpoints, and is an example of how you -+ * can write a hardware-agnostic gadget driver running inside a USB device. -+ * -+ * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't -+ * affect most of the driver. -+ * -+ * Use it with the Linux host/master side "usbtest" driver to get a basic -+ * functional test of your device-side usb stack, or with "usb-skeleton". -+ * -+ * It supports two similar configurations. One sinks whatever the usb host -+ * writes, and in return sources zeroes. The other loops whatever the host -+ * writes back, so the host can read it. Module options include: -+ * -+ * buflen=N default N=4096, buffer size used -+ * qlen=N default N=32, how many buffers in the loopback queue -+ * loopdefault default false, list loopback config first -+ * -+ * Many drivers will only have one configuration, letting them be much -+ * simpler if they also don't support high speed operation (like this -+ * driver does). -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) -+# include -+#else -+# include -+#endif -+ -+#include -+ -+ -+/*-------------------------------------------------------------------------*/ -+/*-------------------------------------------------------------------------*/ -+ -+ -+static int utf8_to_utf16le(const char *s, u16 *cp, unsigned len) -+{ -+ int count = 0; -+ u8 c; -+ u16 uchar; -+ -+ /* this insists on correct encodings, though not minimal ones. -+ * BUT it currently rejects legit 4-byte UTF-8 code points, -+ * which need surrogate pairs. (Unicode 3.1 can use them.) -+ */ -+ while (len != 0 && (c = (u8) *s++) != 0) { -+ if (unlikely(c & 0x80)) { -+ // 2-byte sequence: -+ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx -+ if ((c & 0xe0) == 0xc0) { -+ uchar = (c & 0x1f) << 6; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c; -+ -+ // 3-byte sequence (most CJKV characters): -+ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx -+ } else if ((c & 0xf0) == 0xe0) { -+ uchar = (c & 0x0f) << 12; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c << 6; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c; -+ -+ /* no bogus surrogates */ -+ if (0xd800 <= uchar && uchar <= 0xdfff) -+ goto fail; -+ -+ // 4-byte sequence (surrogate pairs, currently rare): -+ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx -+ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx -+ // (uuuuu = wwww + 1) -+ // FIXME accept the surrogate code points (only) -+ -+ } else -+ goto fail; -+ } else -+ uchar = c; -+ put_unaligned (cpu_to_le16 (uchar), cp++); -+ count++; -+ len--; -+ } -+ return count; -+fail: -+ return -1; -+} -+ -+ -+/** -+ * usb_gadget_get_string - fill out a string descriptor -+ * @table: of c strings encoded using UTF-8 -+ * @id: string id, from low byte of wValue in get string descriptor -+ * @buf: at least 256 bytes -+ * -+ * Finds the UTF-8 string matching the ID, and converts it into a -+ * string descriptor in utf16-le. -+ * Returns length of descriptor (always even) or negative errno -+ * -+ * If your driver needs stings in multiple languages, you'll probably -+ * "switch (wIndex) { ... }" in your ep0 string descriptor logic, -+ * using this routine after choosing which set of UTF-8 strings to use. -+ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with -+ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1 -+ * characters (which are also widely used in C strings). -+ */ -+int -+usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf) -+{ -+ struct usb_string *s; -+ int len; -+ -+ /* descriptor 0 has the language id */ -+ if (id == 0) { -+ buf [0] = 4; -+ buf [1] = USB_DT_STRING; -+ buf [2] = (u8) table->language; -+ buf [3] = (u8) (table->language >> 8); -+ return 4; -+ } -+ for (s = table->strings; s && s->s; s++) -+ if (s->id == id) -+ break; -+ -+ /* unrecognized: stall. */ -+ if (!s || !s->s) -+ return -EINVAL; -+ -+ /* string descriptors have length, tag, then UTF16-LE text */ -+ len = min ((size_t) 126, strlen (s->s)); -+ memset (buf + 2, 0, 2 * len); /* zero all the bytes */ -+ len = utf8_to_utf16le(s->s, (u16 *)&buf[2], len); -+ if (len < 0) -+ return -EINVAL; -+ buf [0] = (len + 1) * 2; -+ buf [1] = USB_DT_STRING; -+ return buf [0]; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+/*-------------------------------------------------------------------------*/ -+ -+ -+/** -+ * usb_descriptor_fillbuf - fill buffer with descriptors -+ * @buf: Buffer to be filled -+ * @buflen: Size of buf -+ * @src: Array of descriptor pointers, terminated by null pointer. -+ * -+ * Copies descriptors into the buffer, returning the length or a -+ * negative error code if they can't all be copied. Useful when -+ * assembling descriptors for an associated set of interfaces used -+ * as part of configuring a composite device; or in other cases where -+ * sets of descriptors need to be marshaled. -+ */ -+int -+usb_descriptor_fillbuf(void *buf, unsigned buflen, -+ const struct usb_descriptor_header **src) -+{ -+ u8 *dest = buf; -+ -+ if (!src) -+ return -EINVAL; -+ -+ /* fill buffer from src[] until null descriptor ptr */ -+ for (; 0 != *src; src++) { -+ unsigned len = (*src)->bLength; -+ -+ if (len > buflen) -+ return -EINVAL; -+ memcpy(dest, *src, len); -+ buflen -= len; -+ dest += len; -+ } -+ return dest - (u8 *)buf; -+} -+ -+ -+/** -+ * usb_gadget_config_buf - builts a complete configuration descriptor -+ * @config: Header for the descriptor, including characteristics such -+ * as power requirements and number of interfaces. -+ * @desc: Null-terminated vector of pointers to the descriptors (interface, -+ * endpoint, etc) defining all functions in this device configuration. -+ * @buf: Buffer for the resulting configuration descriptor. -+ * @length: Length of buffer. If this is not big enough to hold the -+ * entire configuration descriptor, an error code will be returned. -+ * -+ * This copies descriptors into the response buffer, building a descriptor -+ * for that configuration. It returns the buffer length or a negative -+ * status code. The config.wTotalLength field is set to match the length -+ * of the result, but other descriptor fields (including power usage and -+ * interface count) must be set by the caller. -+ * -+ * Gadget drivers could use this when constructing a config descriptor -+ * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the -+ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed. -+ */ -+int usb_gadget_config_buf( -+ const struct usb_config_descriptor *config, -+ void *buf, -+ unsigned length, -+ const struct usb_descriptor_header **desc -+) -+{ -+ struct usb_config_descriptor *cp = buf; -+ int len; -+ -+ /* config descriptor first */ -+ if (length < USB_DT_CONFIG_SIZE || !desc) -+ return -EINVAL; -+ *cp = *config; -+ -+ /* then interface/endpoint/class/vendor/... */ -+ len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf, -+ length - USB_DT_CONFIG_SIZE, desc); -+ if (len < 0) -+ return len; -+ len += USB_DT_CONFIG_SIZE; -+ if (len > 0xffff) -+ return -EINVAL; -+ -+ /* patch up the config descriptor */ -+ cp->bLength = USB_DT_CONFIG_SIZE; -+ cp->bDescriptorType = USB_DT_CONFIG; -+ cp->wTotalLength = cpu_to_le16(len); -+ cp->bmAttributes |= USB_CONFIG_ATT_ONE; -+ return len; -+} -+ -+/*-------------------------------------------------------------------------*/ -+/*-------------------------------------------------------------------------*/ -+ -+ -+#define RBUF_LEN (1024*1024) -+static int rbuf_start; -+static int rbuf_len; -+static __u8 rbuf[RBUF_LEN]; -+ -+/*-------------------------------------------------------------------------*/ -+ -+#define DRIVER_VERSION "St Patrick's Day 2004" -+ -+static const char shortname [] = "zero"; -+static const char longname [] = "YAMAHA YST-MS35D USB Speaker "; -+ -+static const char source_sink [] = "source and sink data"; -+static const char loopback [] = "loop input to output"; -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* -+ * driver assumes self-powered hardware, and -+ * has no way for users to trigger remote wakeup. -+ * -+ * this version autoconfigures as much as possible, -+ * which is reasonable for most "bulk-only" drivers. -+ */ -+static const char *EP_IN_NAME; /* source */ -+static const char *EP_OUT_NAME; /* sink */ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* big enough to hold our biggest descriptor */ -+#define USB_BUFSIZ 512 -+ -+struct zero_dev { -+ spinlock_t lock; -+ struct usb_gadget *gadget; -+ struct usb_request *req; /* for control responses */ -+ -+ /* when configured, we have one of two configs: -+ * - source data (in to host) and sink it (out from host) -+ * - or loop it back (out from host back in to host) -+ */ -+ u8 config; -+ struct usb_ep *in_ep, *out_ep; -+ -+ /* autoresume timer */ -+ struct timer_list resume; -+}; -+ -+#define xprintk(d,level,fmt,args...) \ -+ dev_printk(level , &(d)->gadget->dev , fmt , ## args) -+ -+#ifdef DEBUG -+#define DBG(dev,fmt,args...) \ -+ xprintk(dev , KERN_DEBUG , fmt , ## args) -+#else -+#define DBG(dev,fmt,args...) \ -+ do { } while (0) -+#endif /* DEBUG */ -+ -+#ifdef VERBOSE -+#define VDBG DBG -+#else -+#define VDBG(dev,fmt,args...) \ -+ do { } while (0) -+#endif /* VERBOSE */ -+ -+#define ERROR(dev,fmt,args...) \ -+ xprintk(dev , KERN_ERR , fmt , ## args) -+#define WARN(dev,fmt,args...) \ -+ xprintk(dev , KERN_WARNING , fmt , ## args) -+#define INFO(dev,fmt,args...) \ -+ xprintk(dev , KERN_INFO , fmt , ## args) -+ -+/*-------------------------------------------------------------------------*/ -+ -+static unsigned buflen = 4096; -+static unsigned qlen = 32; -+static unsigned pattern = 0; -+ -+module_param (buflen, uint, S_IRUGO|S_IWUSR); -+module_param (qlen, uint, S_IRUGO|S_IWUSR); -+module_param (pattern, uint, S_IRUGO|S_IWUSR); -+ -+/* -+ * if it's nonzero, autoresume says how many seconds to wait -+ * before trying to wake up the host after suspend. -+ */ -+static unsigned autoresume = 0; -+module_param (autoresume, uint, 0); -+ -+/* -+ * Normally the "loopback" configuration is second (index 1) so -+ * it's not the default. Here's where to change that order, to -+ * work better with hosts where config changes are problematic. -+ * Or controllers (like superh) that only support one config. -+ */ -+static int loopdefault = 0; -+ -+module_param (loopdefault, bool, S_IRUGO|S_IWUSR); -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* Thanks to NetChip Technologies for donating this product ID. -+ * -+ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! -+ * Instead: allocate your own, using normal USB-IF procedures. -+ */ -+#ifndef CONFIG_USB_ZERO_HNPTEST -+#define DRIVER_VENDOR_NUM 0x0525 /* NetChip */ -+#define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */ -+#else -+#define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */ -+#define DRIVER_PRODUCT_NUM 0xbadd -+#endif -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* -+ * DESCRIPTORS ... most are static, but strings and (full) -+ * configuration descriptors are built on demand. -+ */ -+ -+/* -+#define STRING_MANUFACTURER 25 -+#define STRING_PRODUCT 42 -+#define STRING_SERIAL 101 -+*/ -+#define STRING_MANUFACTURER 1 -+#define STRING_PRODUCT 2 -+#define STRING_SERIAL 3 -+ -+#define STRING_SOURCE_SINK 250 -+#define STRING_LOOPBACK 251 -+ -+/* -+ * This device advertises two configurations; these numbers work -+ * on a pxa250 as well as more flexible hardware. -+ */ -+#define CONFIG_SOURCE_SINK 3 -+#define CONFIG_LOOPBACK 2 -+ -+/* -+static struct usb_device_descriptor -+device_desc = { -+ .bLength = sizeof device_desc, -+ .bDescriptorType = USB_DT_DEVICE, -+ -+ .bcdUSB = __constant_cpu_to_le16 (0x0200), -+ .bDeviceClass = USB_CLASS_VENDOR_SPEC, -+ -+ .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM), -+ .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM), -+ .iManufacturer = STRING_MANUFACTURER, -+ .iProduct = STRING_PRODUCT, -+ .iSerialNumber = STRING_SERIAL, -+ .bNumConfigurations = 2, -+}; -+*/ -+static struct usb_device_descriptor -+device_desc = { -+ .bLength = sizeof device_desc, -+ .bDescriptorType = USB_DT_DEVICE, -+ .bcdUSB = __constant_cpu_to_le16 (0x0100), -+ .bDeviceClass = USB_CLASS_PER_INTERFACE, -+ .bDeviceSubClass = 0, -+ .bDeviceProtocol = 0, -+ .bMaxPacketSize0 = 64, -+ .bcdDevice = __constant_cpu_to_le16 (0x0100), -+ .idVendor = __constant_cpu_to_le16 (0x0499), -+ .idProduct = __constant_cpu_to_le16 (0x3002), -+ .iManufacturer = STRING_MANUFACTURER, -+ .iProduct = STRING_PRODUCT, -+ .iSerialNumber = STRING_SERIAL, -+ .bNumConfigurations = 1, -+}; -+ -+static struct usb_config_descriptor -+z_config = { -+ .bLength = sizeof z_config, -+ .bDescriptorType = USB_DT_CONFIG, -+ -+ /* compute wTotalLength on the fly */ -+ .bNumInterfaces = 2, -+ .bConfigurationValue = 1, -+ .iConfiguration = 0, -+ .bmAttributes = 0x40, -+ .bMaxPower = 0, /* self-powered */ -+}; -+ -+ -+static struct usb_otg_descriptor -+otg_descriptor = { -+ .bLength = sizeof otg_descriptor, -+ .bDescriptorType = USB_DT_OTG, -+ -+ .bmAttributes = USB_OTG_SRP, -+}; -+ -+/* one interface in each configuration */ -+#ifdef CONFIG_USB_GADGET_DUALSPEED -+ -+/* -+ * usb 2.0 devices need to expose both high speed and full speed -+ * descriptors, unless they only run at full speed. -+ * -+ * that means alternate endpoint descriptors (bigger packets) -+ * and a "device qualifier" ... plus more construction options -+ * for the config descriptor. -+ */ -+ -+static struct usb_qualifier_descriptor -+dev_qualifier = { -+ .bLength = sizeof dev_qualifier, -+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER, -+ -+ .bcdUSB = __constant_cpu_to_le16 (0x0200), -+ .bDeviceClass = USB_CLASS_VENDOR_SPEC, -+ -+ .bNumConfigurations = 2, -+}; -+ -+ -+struct usb_cs_as_general_descriptor { -+ __u8 bLength; -+ __u8 bDescriptorType; -+ -+ __u8 bDescriptorSubType; -+ __u8 bTerminalLink; -+ __u8 bDelay; -+ __u16 wFormatTag; -+} __attribute__ ((packed)); -+ -+struct usb_cs_as_format_descriptor { -+ __u8 bLength; -+ __u8 bDescriptorType; -+ -+ __u8 bDescriptorSubType; -+ __u8 bFormatType; -+ __u8 bNrChannels; -+ __u8 bSubframeSize; -+ __u8 bBitResolution; -+ __u8 bSamfreqType; -+ __u8 tLowerSamFreq[3]; -+ __u8 tUpperSamFreq[3]; -+} __attribute__ ((packed)); -+ -+static const struct usb_interface_descriptor -+z_audio_control_if_desc = { -+ .bLength = sizeof z_audio_control_if_desc, -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 0, -+ .bAlternateSetting = 0, -+ .bNumEndpoints = 0, -+ .bInterfaceClass = USB_CLASS_AUDIO, -+ .bInterfaceSubClass = 0x1, -+ .bInterfaceProtocol = 0, -+ .iInterface = 0, -+}; -+ -+static const struct usb_interface_descriptor -+z_audio_if_desc = { -+ .bLength = sizeof z_audio_if_desc, -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 1, -+ .bAlternateSetting = 0, -+ .bNumEndpoints = 0, -+ .bInterfaceClass = USB_CLASS_AUDIO, -+ .bInterfaceSubClass = 0x2, -+ .bInterfaceProtocol = 0, -+ .iInterface = 0, -+}; -+ -+static const struct usb_interface_descriptor -+z_audio_if_desc2 = { -+ .bLength = sizeof z_audio_if_desc, -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 1, -+ .bAlternateSetting = 1, -+ .bNumEndpoints = 1, -+ .bInterfaceClass = USB_CLASS_AUDIO, -+ .bInterfaceSubClass = 0x2, -+ .bInterfaceProtocol = 0, -+ .iInterface = 0, -+}; -+ -+static const struct usb_cs_as_general_descriptor -+z_audio_cs_as_if_desc = { -+ .bLength = 7, -+ .bDescriptorType = 0x24, -+ -+ .bDescriptorSubType = 0x01, -+ .bTerminalLink = 0x01, -+ .bDelay = 0x0, -+ .wFormatTag = __constant_cpu_to_le16 (0x0001) -+}; -+ -+ -+static const struct usb_cs_as_format_descriptor -+z_audio_cs_as_format_desc = { -+ .bLength = 0xe, -+ .bDescriptorType = 0x24, -+ -+ .bDescriptorSubType = 2, -+ .bFormatType = 1, -+ .bNrChannels = 1, -+ .bSubframeSize = 1, -+ .bBitResolution = 8, -+ .bSamfreqType = 0, -+ .tLowerSamFreq = {0x7e, 0x13, 0x00}, -+ .tUpperSamFreq = {0xe2, 0xd6, 0x00}, -+}; -+ -+static const struct usb_endpoint_descriptor -+z_iso_ep = { -+ .bLength = 0x09, -+ .bDescriptorType = 0x05, -+ .bEndpointAddress = 0x04, -+ .bmAttributes = 0x09, -+ .wMaxPacketSize = 0x0038, -+ .bInterval = 0x01, -+ .bRefresh = 0x00, -+ .bSynchAddress = 0x00, -+}; -+ -+static char z_iso_ep2[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; -+ -+// 9 bytes -+static char z_ac_interface_header_desc[] = -+{ 0x09, 0x24, 0x01, 0x00, 0x01, 0x2b, 0x00, 0x01, 0x01 }; -+ -+// 12 bytes -+static char z_0[] = {0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02, -+ 0x03, 0x00, 0x00, 0x00}; -+// 13 bytes -+static char z_1[] = {0x0d, 0x24, 0x06, 0x02, 0x01, 0x02, 0x15, 0x00, -+ 0x02, 0x00, 0x02, 0x00, 0x00}; -+// 9 bytes -+static char z_2[] = {0x09, 0x24, 0x03, 0x03, 0x01, 0x03, 0x00, 0x02, -+ 0x00}; -+ -+static char za_0[] = {0x09, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x00, -+ 0x00}; -+ -+static char za_1[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; -+ -+static char za_2[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x01, 0x08, 0x00, -+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; -+ -+static char za_3[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00, -+ 0x00}; -+ -+static char za_4[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; -+ -+static char za_5[] = {0x09, 0x04, 0x01, 0x03, 0x01, 0x01, 0x02, 0x00, -+ 0x00}; -+ -+static char za_6[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; -+ -+static char za_7[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x02, 0x10, 0x00, -+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; -+ -+static char za_8[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00, -+ 0x00}; -+ -+static char za_9[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; -+ -+static char za_10[] = {0x09, 0x04, 0x01, 0x04, 0x01, 0x01, 0x02, 0x00, -+ 0x00}; -+ -+static char za_11[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; -+ -+static char za_12[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x00, -+ 0x73, 0x13, 0x00, 0xe2, 0xd6, 0x00}; -+ -+static char za_13[] = {0x09, 0x05, 0x04, 0x09, 0xe0, 0x00, 0x01, 0x00, -+ 0x00}; -+ -+static char za_14[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; -+ -+static char za_15[] = {0x09, 0x04, 0x01, 0x05, 0x01, 0x01, 0x02, 0x00, -+ 0x00}; -+ -+static char za_16[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; -+ -+static char za_17[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x03, 0x14, 0x00, -+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; -+ -+static char za_18[] = {0x09, 0x05, 0x04, 0x09, 0xa8, 0x00, 0x01, 0x00, -+ 0x00}; -+ -+static char za_19[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; -+ -+static char za_20[] = {0x09, 0x04, 0x01, 0x06, 0x01, 0x01, 0x02, 0x00, -+ 0x00}; -+ -+static char za_21[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; -+ -+static char za_22[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x03, 0x14, 0x00, -+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; -+ -+static char za_23[] = {0x09, 0x05, 0x04, 0x09, 0x50, 0x01, 0x01, 0x00, -+ 0x00}; -+ -+static char za_24[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; -+ -+ -+ -+static const struct usb_descriptor_header *z_function [] = { -+ (struct usb_descriptor_header *) &z_audio_control_if_desc, -+ (struct usb_descriptor_header *) &z_ac_interface_header_desc, -+ (struct usb_descriptor_header *) &z_0, -+ (struct usb_descriptor_header *) &z_1, -+ (struct usb_descriptor_header *) &z_2, -+ (struct usb_descriptor_header *) &z_audio_if_desc, -+ (struct usb_descriptor_header *) &z_audio_if_desc2, -+ (struct usb_descriptor_header *) &z_audio_cs_as_if_desc, -+ (struct usb_descriptor_header *) &z_audio_cs_as_format_desc, -+ (struct usb_descriptor_header *) &z_iso_ep, -+ (struct usb_descriptor_header *) &z_iso_ep2, -+ (struct usb_descriptor_header *) &za_0, -+ (struct usb_descriptor_header *) &za_1, -+ (struct usb_descriptor_header *) &za_2, -+ (struct usb_descriptor_header *) &za_3, -+ (struct usb_descriptor_header *) &za_4, -+ (struct usb_descriptor_header *) &za_5, -+ (struct usb_descriptor_header *) &za_6, -+ (struct usb_descriptor_header *) &za_7, -+ (struct usb_descriptor_header *) &za_8, -+ (struct usb_descriptor_header *) &za_9, -+ (struct usb_descriptor_header *) &za_10, -+ (struct usb_descriptor_header *) &za_11, -+ (struct usb_descriptor_header *) &za_12, -+ (struct usb_descriptor_header *) &za_13, -+ (struct usb_descriptor_header *) &za_14, -+ (struct usb_descriptor_header *) &za_15, -+ (struct usb_descriptor_header *) &za_16, -+ (struct usb_descriptor_header *) &za_17, -+ (struct usb_descriptor_header *) &za_18, -+ (struct usb_descriptor_header *) &za_19, -+ (struct usb_descriptor_header *) &za_20, -+ (struct usb_descriptor_header *) &za_21, -+ (struct usb_descriptor_header *) &za_22, -+ (struct usb_descriptor_header *) &za_23, -+ (struct usb_descriptor_header *) &za_24, -+ NULL, -+}; -+ -+/* maxpacket and other transfer characteristics vary by speed. */ -+#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs)) -+ -+#else -+ -+/* if there's no high speed support, maxpacket doesn't change. */ -+#define ep_desc(g,hs,fs) fs -+ -+#endif /* !CONFIG_USB_GADGET_DUALSPEED */ -+ -+static char manufacturer [40]; -+//static char serial [40]; -+static char serial [] = "Ser 00 em"; -+ -+/* static strings, in UTF-8 */ -+static struct usb_string strings [] = { -+ { STRING_MANUFACTURER, manufacturer, }, -+ { STRING_PRODUCT, longname, }, -+ { STRING_SERIAL, serial, }, -+ { STRING_LOOPBACK, loopback, }, -+ { STRING_SOURCE_SINK, source_sink, }, -+ { } /* end of list */ -+}; -+ -+static struct usb_gadget_strings stringtab = { -+ .language = 0x0409, /* en-us */ -+ .strings = strings, -+}; -+ -+/* -+ * config descriptors are also handcrafted. these must agree with code -+ * that sets configurations, and with code managing interfaces and their -+ * altsettings. other complexity may come from: -+ * -+ * - high speed support, including "other speed config" rules -+ * - multiple configurations -+ * - interfaces with alternate settings -+ * - embedded class or vendor-specific descriptors -+ * -+ * this handles high speed, and has a second config that could as easily -+ * have been an alternate interface setting (on most hardware). -+ * -+ * NOTE: to demonstrate (and test) more USB capabilities, this driver -+ * should include an altsetting to test interrupt transfers, including -+ * high bandwidth modes at high speed. (Maybe work like Intel's test -+ * device?) -+ */ -+static int -+config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index) -+{ -+ int len; -+ const struct usb_descriptor_header **function; -+ -+ function = z_function; -+ len = usb_gadget_config_buf (&z_config, buf, USB_BUFSIZ, function); -+ if (len < 0) -+ return len; -+ ((struct usb_config_descriptor *) buf)->bDescriptorType = type; -+ return len; -+} -+ -+/*-------------------------------------------------------------------------*/ -+ -+static struct usb_request * -+alloc_ep_req (struct usb_ep *ep, unsigned length) -+{ -+ struct usb_request *req; -+ -+ req = usb_ep_alloc_request (ep, GFP_ATOMIC); -+ if (req) { -+ req->length = length; -+ req->buf = usb_ep_alloc_buffer (ep, length, -+ &req->dma, GFP_ATOMIC); -+ if (!req->buf) { -+ usb_ep_free_request (ep, req); -+ req = NULL; -+ } -+ } -+ return req; -+} -+ -+static void free_ep_req (struct usb_ep *ep, struct usb_request *req) -+{ -+ if (req->buf) -+ usb_ep_free_buffer (ep, req->buf, req->dma, req->length); -+ usb_ep_free_request (ep, req); -+} -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* optionally require specific source/sink data patterns */ -+ -+static int -+check_read_data ( -+ struct zero_dev *dev, -+ struct usb_ep *ep, -+ struct usb_request *req -+) -+{ -+ unsigned i; -+ u8 *buf = req->buf; -+ -+ for (i = 0; i < req->actual; i++, buf++) { -+ switch (pattern) { -+ /* all-zeroes has no synchronization issues */ -+ case 0: -+ if (*buf == 0) -+ continue; -+ break; -+ /* mod63 stays in sync with short-terminated transfers, -+ * or otherwise when host and gadget agree on how large -+ * each usb transfer request should be. resync is done -+ * with set_interface or set_config. -+ */ -+ case 1: -+ if (*buf == (u8)(i % 63)) -+ continue; -+ break; -+ } -+ ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf); -+ usb_ep_set_halt (ep); -+ return -EINVAL; -+ } -+ return 0; -+} -+ -+/*-------------------------------------------------------------------------*/ -+ -+static void zero_reset_config (struct zero_dev *dev) -+{ -+ if (dev->config == 0) -+ return; -+ -+ DBG (dev, "reset config\n"); -+ -+ /* just disable endpoints, forcing completion of pending i/o. -+ * all our completion handlers free their requests in this case. -+ */ -+ if (dev->in_ep) { -+ usb_ep_disable (dev->in_ep); -+ dev->in_ep = NULL; -+ } -+ if (dev->out_ep) { -+ usb_ep_disable (dev->out_ep); -+ dev->out_ep = NULL; -+ } -+ dev->config = 0; -+ del_timer (&dev->resume); -+} -+ -+#define _write(f, buf, sz) (f->f_op->write(f, buf, sz, &f->f_pos)) -+ -+static void -+zero_isoc_complete (struct usb_ep *ep, struct usb_request *req) -+{ -+ struct zero_dev *dev = ep->driver_data; -+ int status = req->status; -+ int i, j; -+ -+ switch (status) { -+ -+ case 0: /* normal completion? */ -+ //printk ("\nzero ---------------> isoc normal completion %d bytes\n", req->actual); -+ for (i=0, j=rbuf_start; iactual; i++) { -+ //printk ("%02x ", ((__u8*)req->buf)[i]); -+ rbuf[j] = ((__u8*)req->buf)[i]; -+ j++; -+ if (j >= RBUF_LEN) j=0; -+ } -+ rbuf_start = j; -+ //printk ("\n\n"); -+ -+ if (rbuf_len < RBUF_LEN) { -+ rbuf_len += req->actual; -+ if (rbuf_len > RBUF_LEN) { -+ rbuf_len = RBUF_LEN; -+ } -+ } -+ -+ break; -+ -+ /* this endpoint is normally active while we're configured */ -+ case -ECONNABORTED: /* hardware forced ep reset */ -+ case -ECONNRESET: /* request dequeued */ -+ case -ESHUTDOWN: /* disconnect from host */ -+ VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status, -+ req->actual, req->length); -+ if (ep == dev->out_ep) -+ check_read_data (dev, ep, req); -+ free_ep_req (ep, req); -+ return; -+ -+ case -EOVERFLOW: /* buffer overrun on read means that -+ * we didn't provide a big enough -+ * buffer. -+ */ -+ default: -+#if 1 -+ DBG (dev, "%s complete --> %d, %d/%d\n", ep->name, -+ status, req->actual, req->length); -+#endif -+ case -EREMOTEIO: /* short read */ -+ break; -+ } -+ -+ status = usb_ep_queue (ep, req, GFP_ATOMIC); -+ if (status) { -+ ERROR (dev, "kill %s: resubmit %d bytes --> %d\n", -+ ep->name, req->length, status); -+ usb_ep_set_halt (ep); -+ /* FIXME recover later ... somehow */ -+ } -+} -+ -+static struct usb_request * -+zero_start_isoc_ep (struct usb_ep *ep, int gfp_flags) -+{ -+ struct usb_request *req; -+ int status; -+ -+ req = alloc_ep_req (ep, 512); -+ if (!req) -+ return NULL; -+ -+ req->complete = zero_isoc_complete; -+ -+ status = usb_ep_queue (ep, req, gfp_flags); -+ if (status) { -+ struct zero_dev *dev = ep->driver_data; -+ -+ ERROR (dev, "start %s --> %d\n", ep->name, status); -+ free_ep_req (ep, req); -+ req = NULL; -+ } -+ -+ return req; -+} -+ -+/* change our operational config. this code must agree with the code -+ * that returns config descriptors, and altsetting code. -+ * -+ * it's also responsible for power management interactions. some -+ * configurations might not work with our current power sources. -+ * -+ * note that some device controller hardware will constrain what this -+ * code can do, perhaps by disallowing more than one configuration or -+ * by limiting configuration choices (like the pxa2xx). -+ */ -+static int -+zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags) -+{ -+ int result = 0; -+ struct usb_gadget *gadget = dev->gadget; -+ const struct usb_endpoint_descriptor *d; -+ struct usb_ep *ep; -+ -+ if (number == dev->config) -+ return 0; -+ -+ zero_reset_config (dev); -+ -+ gadget_for_each_ep (ep, gadget) { -+ -+ if (strcmp (ep->name, "ep4") == 0) { -+ -+ d = (struct usb_endpoint_descripter *)&za_23; // isoc ep desc for audio i/f alt setting 6 -+ result = usb_ep_enable (ep, d); -+ -+ if (result == 0) { -+ ep->driver_data = dev; -+ dev->in_ep = ep; -+ -+ if (zero_start_isoc_ep (ep, gfp_flags) != 0) { -+ -+ dev->in_ep = ep; -+ continue; -+ } -+ -+ usb_ep_disable (ep); -+ result = -EIO; -+ } -+ } -+ -+ } -+ -+ dev->config = number; -+ return result; -+} -+ -+/*-------------------------------------------------------------------------*/ -+ -+static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req) -+{ -+ if (req->status || req->actual != req->length) -+ DBG ((struct zero_dev *) ep->driver_data, -+ "setup complete --> %d, %d/%d\n", -+ req->status, req->actual, req->length); -+} -+ -+/* -+ * The setup() callback implements all the ep0 functionality that's -+ * not handled lower down, in hardware or the hardware driver (like -+ * device and endpoint feature flags, and their status). It's all -+ * housekeeping for the gadget function we're implementing. Most of -+ * the work is in config-specific setup. -+ */ -+static int -+zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) -+{ -+ struct zero_dev *dev = get_gadget_data (gadget); -+ struct usb_request *req = dev->req; -+ int value = -EOPNOTSUPP; -+ -+ /* usually this stores reply data in the pre-allocated ep0 buffer, -+ * but config change events will reconfigure hardware. -+ */ -+ req->zero = 0; -+ switch (ctrl->bRequest) { -+ -+ case USB_REQ_GET_DESCRIPTOR: -+ -+ switch (ctrl->wValue >> 8) { -+ -+ case USB_DT_DEVICE: -+ value = min (ctrl->wLength, (u16) sizeof device_desc); -+ memcpy (req->buf, &device_desc, value); -+ break; -+#ifdef CONFIG_USB_GADGET_DUALSPEED -+ case USB_DT_DEVICE_QUALIFIER: -+ if (!gadget->is_dualspeed) -+ break; -+ value = min (ctrl->wLength, (u16) sizeof dev_qualifier); -+ memcpy (req->buf, &dev_qualifier, value); -+ break; -+ -+ case USB_DT_OTHER_SPEED_CONFIG: -+ if (!gadget->is_dualspeed) -+ break; -+ // FALLTHROUGH -+#endif /* CONFIG_USB_GADGET_DUALSPEED */ -+ case USB_DT_CONFIG: -+ value = config_buf (gadget, req->buf, -+ ctrl->wValue >> 8, -+ ctrl->wValue & 0xff); -+ if (value >= 0) -+ value = min (ctrl->wLength, (u16) value); -+ break; -+ -+ case USB_DT_STRING: -+ /* wIndex == language code. -+ * this driver only handles one language, you can -+ * add string tables for other languages, using -+ * any UTF-8 characters -+ */ -+ value = usb_gadget_get_string (&stringtab, -+ ctrl->wValue & 0xff, req->buf); -+ if (value >= 0) { -+ value = min (ctrl->wLength, (u16) value); -+ } -+ break; -+ } -+ break; -+ -+ /* currently two configs, two speeds */ -+ case USB_REQ_SET_CONFIGURATION: -+ if (ctrl->bRequestType != 0) -+ goto unknown; -+ -+ spin_lock (&dev->lock); -+ value = zero_set_config (dev, ctrl->wValue, GFP_ATOMIC); -+ spin_unlock (&dev->lock); -+ break; -+ case USB_REQ_GET_CONFIGURATION: -+ if (ctrl->bRequestType != USB_DIR_IN) -+ goto unknown; -+ *(u8 *)req->buf = dev->config; -+ value = min (ctrl->wLength, (u16) 1); -+ break; -+ -+ /* until we add altsetting support, or other interfaces, -+ * only 0/0 are possible. pxa2xx only supports 0/0 (poorly) -+ * and already killed pending endpoint I/O. -+ */ -+ case USB_REQ_SET_INTERFACE: -+ -+ if (ctrl->bRequestType != USB_RECIP_INTERFACE) -+ goto unknown; -+ spin_lock (&dev->lock); -+ if (dev->config) { -+ u8 config = dev->config; -+ -+ /* resets interface configuration, forgets about -+ * previous transaction state (queued bufs, etc) -+ * and re-inits endpoint state (toggle etc) -+ * no response queued, just zero status == success. -+ * if we had more than one interface we couldn't -+ * use this "reset the config" shortcut. -+ */ -+ zero_reset_config (dev); -+ zero_set_config (dev, config, GFP_ATOMIC); -+ value = 0; -+ } -+ spin_unlock (&dev->lock); -+ break; -+ case USB_REQ_GET_INTERFACE: -+ if ((ctrl->bRequestType == 0x21) && (ctrl->wIndex == 0x02)) { -+ value = ctrl->wLength; -+ break; -+ } -+ else { -+ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) -+ goto unknown; -+ if (!dev->config) -+ break; -+ if (ctrl->wIndex != 0) { -+ value = -EDOM; -+ break; -+ } -+ *(u8 *)req->buf = 0; -+ value = min (ctrl->wLength, (u16) 1); -+ } -+ break; -+ -+ /* -+ * These are the same vendor-specific requests supported by -+ * Intel's USB 2.0 compliance test devices. We exceed that -+ * device spec by allowing multiple-packet requests. -+ */ -+ case 0x5b: /* control WRITE test -- fill the buffer */ -+ if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR)) -+ goto unknown; -+ if (ctrl->wValue || ctrl->wIndex) -+ break; -+ /* just read that many bytes into the buffer */ -+ if (ctrl->wLength > USB_BUFSIZ) -+ break; -+ value = ctrl->wLength; -+ break; -+ case 0x5c: /* control READ test -- return the buffer */ -+ if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR)) -+ goto unknown; -+ if (ctrl->wValue || ctrl->wIndex) -+ break; -+ /* expect those bytes are still in the buffer; send back */ -+ if (ctrl->wLength > USB_BUFSIZ -+ || ctrl->wLength != req->length) -+ break; -+ value = ctrl->wLength; -+ break; -+ -+ case 0x01: // SET_CUR -+ case 0x02: -+ case 0x03: -+ case 0x04: -+ case 0x05: -+ value = ctrl->wLength; -+ break; -+ case 0x81: -+ switch (ctrl->wValue) { -+ case 0x0201: -+ case 0x0202: -+ ((u8*)req->buf)[0] = 0x00; -+ ((u8*)req->buf)[1] = 0xe3; -+ break; -+ case 0x0300: -+ case 0x0500: -+ ((u8*)req->buf)[0] = 0x00; -+ break; -+ } -+ //((u8*)req->buf)[0] = 0x81; -+ //((u8*)req->buf)[1] = 0x81; -+ value = ctrl->wLength; -+ break; -+ case 0x82: -+ switch (ctrl->wValue) { -+ case 0x0201: -+ case 0x0202: -+ ((u8*)req->buf)[0] = 0x00; -+ ((u8*)req->buf)[1] = 0xc3; -+ break; -+ case 0x0300: -+ case 0x0500: -+ ((u8*)req->buf)[0] = 0x00; -+ break; -+ } -+ //((u8*)req->buf)[0] = 0x82; -+ //((u8*)req->buf)[1] = 0x82; -+ value = ctrl->wLength; -+ break; -+ case 0x83: -+ switch (ctrl->wValue) { -+ case 0x0201: -+ case 0x0202: -+ ((u8*)req->buf)[0] = 0x00; -+ ((u8*)req->buf)[1] = 0x00; -+ break; -+ case 0x0300: -+ ((u8*)req->buf)[0] = 0x60; -+ break; -+ case 0x0500: -+ ((u8*)req->buf)[0] = 0x18; -+ break; -+ } -+ //((u8*)req->buf)[0] = 0x83; -+ //((u8*)req->buf)[1] = 0x83; -+ value = ctrl->wLength; -+ break; -+ case 0x84: -+ switch (ctrl->wValue) { -+ case 0x0201: -+ case 0x0202: -+ ((u8*)req->buf)[0] = 0x00; -+ ((u8*)req->buf)[1] = 0x01; -+ break; -+ case 0x0300: -+ case 0x0500: -+ ((u8*)req->buf)[0] = 0x08; -+ break; -+ } -+ //((u8*)req->buf)[0] = 0x84; -+ //((u8*)req->buf)[1] = 0x84; -+ value = ctrl->wLength; -+ break; -+ case 0x85: -+ ((u8*)req->buf)[0] = 0x85; -+ ((u8*)req->buf)[1] = 0x85; -+ value = ctrl->wLength; -+ break; -+ -+ -+ default: -+unknown: -+ printk("unknown control req%02x.%02x v%04x i%04x l%d\n", -+ ctrl->bRequestType, ctrl->bRequest, -+ ctrl->wValue, ctrl->wIndex, ctrl->wLength); -+ } -+ -+ /* respond with data transfer before status phase? */ -+ if (value >= 0) { -+ req->length = value; -+ req->zero = value < ctrl->wLength -+ && (value % gadget->ep0->maxpacket) == 0; -+ value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); -+ if (value < 0) { -+ DBG (dev, "ep_queue < 0 --> %d\n", value); -+ req->status = 0; -+ zero_setup_complete (gadget->ep0, req); -+ } -+ } -+ -+ /* device either stalls (value < 0) or reports success */ -+ return value; -+} -+ -+static void -+zero_disconnect (struct usb_gadget *gadget) -+{ -+ struct zero_dev *dev = get_gadget_data (gadget); -+ unsigned long flags; -+ -+ spin_lock_irqsave (&dev->lock, flags); -+ zero_reset_config (dev); -+ -+ /* a more significant application might have some non-usb -+ * activities to quiesce here, saving resources like power -+ * or pushing the notification up a network stack. -+ */ -+ spin_unlock_irqrestore (&dev->lock, flags); -+ -+ /* next we may get setup() calls to enumerate new connections; -+ * or an unbind() during shutdown (including removing module). -+ */ -+} -+ -+static void -+zero_autoresume (unsigned long _dev) -+{ -+ struct zero_dev *dev = (struct zero_dev *) _dev; -+ int status; -+ -+ /* normally the host would be woken up for something -+ * more significant than just a timer firing... -+ */ -+ if (dev->gadget->speed != USB_SPEED_UNKNOWN) { -+ status = usb_gadget_wakeup (dev->gadget); -+ DBG (dev, "wakeup --> %d\n", status); -+ } -+} -+ -+/*-------------------------------------------------------------------------*/ -+ -+static void -+zero_unbind (struct usb_gadget *gadget) -+{ -+ struct zero_dev *dev = get_gadget_data (gadget); -+ -+ DBG (dev, "unbind\n"); -+ -+ /* we've already been disconnected ... no i/o is active */ -+ if (dev->req) -+ free_ep_req (gadget->ep0, dev->req); -+ del_timer_sync (&dev->resume); -+ kfree (dev); -+ set_gadget_data (gadget, NULL); -+} -+ -+static int -+zero_bind (struct usb_gadget *gadget) -+{ -+ struct zero_dev *dev; -+ //struct usb_ep *ep; -+ -+ printk("binding\n"); -+ /* -+ * DRIVER POLICY CHOICE: you may want to do this differently. -+ * One thing to avoid is reusing a bcdDevice revision code -+ * with different host-visible configurations or behavior -+ * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc -+ */ -+ //device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201); -+ -+ -+ /* ok, we made sense of the hardware ... */ -+ dev = kzalloc (sizeof *dev, SLAB_KERNEL); -+ if (!dev) -+ return -ENOMEM; -+ spin_lock_init (&dev->lock); -+ dev->gadget = gadget; -+ set_gadget_data (gadget, dev); -+ -+ /* preallocate control response and buffer */ -+ dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL); -+ if (!dev->req) -+ goto enomem; -+ dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ, -+ &dev->req->dma, GFP_KERNEL); -+ if (!dev->req->buf) -+ goto enomem; -+ -+ dev->req->complete = zero_setup_complete; -+ -+ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; -+ -+#ifdef CONFIG_USB_GADGET_DUALSPEED -+ /* assume ep0 uses the same value for both speeds ... */ -+ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; -+ -+ /* and that all endpoints are dual-speed */ -+ //hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; -+ //hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; -+#endif -+ -+ usb_gadget_set_selfpowered (gadget); -+ -+ init_timer (&dev->resume); -+ dev->resume.function = zero_autoresume; -+ dev->resume.data = (unsigned long) dev; -+ -+ gadget->ep0->driver_data = dev; -+ -+ INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname); -+ INFO (dev, "using %s, OUT %s IN %s\n", gadget->name, -+ EP_OUT_NAME, EP_IN_NAME); -+ -+ snprintf (manufacturer, sizeof manufacturer, -+ UTS_SYSNAME " " UTS_RELEASE " with %s", -+ gadget->name); -+ -+ return 0; -+ -+enomem: -+ zero_unbind (gadget); -+ return -ENOMEM; -+} -+ -+/*-------------------------------------------------------------------------*/ -+ -+static void -+zero_suspend (struct usb_gadget *gadget) -+{ -+ struct zero_dev *dev = get_gadget_data (gadget); -+ -+ if (gadget->speed == USB_SPEED_UNKNOWN) -+ return; -+ -+ if (autoresume) { -+ mod_timer (&dev->resume, jiffies + (HZ * autoresume)); -+ DBG (dev, "suspend, wakeup in %d seconds\n", autoresume); -+ } else -+ DBG (dev, "suspend\n"); -+} -+ -+static void -+zero_resume (struct usb_gadget *gadget) -+{ -+ struct zero_dev *dev = get_gadget_data (gadget); -+ -+ DBG (dev, "resume\n"); -+ del_timer (&dev->resume); -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static struct usb_gadget_driver zero_driver = { -+#ifdef CONFIG_USB_GADGET_DUALSPEED -+ .speed = USB_SPEED_HIGH, -+#else -+ .speed = USB_SPEED_FULL, -+#endif -+ .function = (char *) longname, -+ .bind = zero_bind, -+ .unbind = zero_unbind, -+ -+ .setup = zero_setup, -+ .disconnect = zero_disconnect, -+ -+ .suspend = zero_suspend, -+ .resume = zero_resume, -+ -+ .driver = { -+ .name = (char *) shortname, -+ // .shutdown = ... -+ // .suspend = ... -+ // .resume = ... -+ }, -+}; -+ -+MODULE_AUTHOR ("David Brownell"); -+MODULE_LICENSE ("Dual BSD/GPL"); -+ -+static struct proc_dir_entry *pdir, *pfile; -+ -+static int isoc_read_data (char *page, char **start, -+ off_t off, int count, -+ int *eof, void *data) -+{ -+ int i; -+ static int c = 0; -+ static int done = 0; -+ static int s = 0; -+ -+/* -+ printk ("\ncount: %d\n", count); -+ printk ("rbuf_start: %d\n", rbuf_start); -+ printk ("rbuf_len: %d\n", rbuf_len); -+ printk ("off: %d\n", off); -+ printk ("start: %p\n\n", *start); -+*/ -+ if (done) { -+ c = 0; -+ done = 0; -+ *eof = 1; -+ return 0; -+ } -+ -+ if (c == 0) { -+ if (rbuf_len == RBUF_LEN) -+ s = rbuf_start; -+ else s = 0; -+ } -+ -+ for (i=0; i= rbuf_len) { -+ *eof = 1; -+ done = 1; -+ } -+ -+ -+ return i; -+} -+ -+static int __init init (void) -+{ -+ -+ int retval = 0; -+ -+ pdir = proc_mkdir("isoc_test", NULL); -+ if(pdir == NULL) { -+ retval = -ENOMEM; -+ printk("Error creating dir\n"); -+ goto done; -+ } -+ pdir->owner = THIS_MODULE; -+ -+ pfile = create_proc_read_entry("isoc_data", -+ 0444, pdir, -+ isoc_read_data, -+ NULL); -+ if (pfile == NULL) { -+ retval = -ENOMEM; -+ printk("Error creating file\n"); -+ goto no_file; -+ } -+ pfile->owner = THIS_MODULE; -+ -+ return usb_gadget_register_driver (&zero_driver); -+ -+ no_file: -+ remove_proc_entry("isoc_data", NULL); -+ done: -+ return retval; -+} -+module_init (init); -+ -+static void __exit cleanup (void) -+{ -+ -+ usb_gadget_unregister_driver (&zero_driver); -+ -+ remove_proc_entry("isoc_data", pdir); -+ remove_proc_entry("isoc_test", NULL); -+} -+module_exit (cleanup); ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_cfi_common.h -@@ -0,0 +1,142 @@ -+/* ========================================================================== -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#if !defined(__DWC_CFI_COMMON_H__) -+#define __DWC_CFI_COMMON_H__ -+ -+//#include -+ -+/** -+ * @file -+ * -+ * This file contains the CFI specific common constants, interfaces -+ * (functions and macros) and structures for Linux. No PCD specific -+ * data structure or definition is to be included in this file. -+ * -+ */ -+ -+/** This is a request for all Core Features */ -+#define VEN_CORE_GET_FEATURES 0xB1 -+ -+/** This is a request to get the value of a specific Core Feature */ -+#define VEN_CORE_GET_FEATURE 0xB2 -+ -+/** This command allows the host to set the value of a specific Core Feature */ -+#define VEN_CORE_SET_FEATURE 0xB3 -+ -+/** This command allows the host to set the default values of -+ * either all or any specific Core Feature -+ */ -+#define VEN_CORE_RESET_FEATURES 0xB4 -+ -+/** This command forces the PCD to write the deferred values of a Core Features */ -+#define VEN_CORE_ACTIVATE_FEATURES 0xB5 -+ -+/** This request reads a DWORD value from a register at the specified offset */ -+#define VEN_CORE_READ_REGISTER 0xB6 -+ -+/** This request writes a DWORD value into a register at the specified offset */ -+#define VEN_CORE_WRITE_REGISTER 0xB7 -+ -+/** This structure is the header of the Core Features dataset returned to -+ * the Host -+ */ -+struct cfi_all_features_header { -+/** The features header structure length is */ -+#define CFI_ALL_FEATURES_HDR_LEN 8 -+ /** -+ * The total length of the features dataset returned to the Host -+ */ -+ uint16_t wTotalLen; -+ -+ /** -+ * CFI version number inBinary-Coded Decimal (i.e., 1.00 is 100H). -+ * This field identifies the version of the CFI Specification with which -+ * the device is compliant. -+ */ -+ uint16_t wVersion; -+ -+ /** The ID of the Core */ -+ uint16_t wCoreID; -+#define CFI_CORE_ID_UDC 1 -+#define CFI_CORE_ID_OTG 2 -+#define CFI_CORE_ID_WUDEV 3 -+ -+ /** Number of features returned by VEN_CORE_GET_FEATURES request */ -+ uint16_t wNumFeatures; -+} UPACKED; -+ -+typedef struct cfi_all_features_header cfi_all_features_header_t; -+ -+/** This structure is a header of the Core Feature descriptor dataset returned to -+ * the Host after the VEN_CORE_GET_FEATURES request -+ */ -+struct cfi_feature_desc_header { -+#define CFI_FEATURE_DESC_HDR_LEN 8 -+ -+ /** The feature ID */ -+ uint16_t wFeatureID; -+ -+ /** Length of this feature descriptor in bytes - including the -+ * length of the feature name string -+ */ -+ uint16_t wLength; -+ -+ /** The data length of this feature in bytes */ -+ uint16_t wDataLength; -+ -+ /** -+ * Attributes of this features -+ * D0: Access rights -+ * 0 - Read/Write -+ * 1 - Read only -+ */ -+ uint8_t bmAttributes; -+#define CFI_FEATURE_ATTR_RO 1 -+#define CFI_FEATURE_ATTR_RW 0 -+ -+ /** Length of the feature name in bytes */ -+ uint8_t bNameLen; -+ -+ /** The feature name buffer */ -+ //uint8_t *name; -+} UPACKED; -+ -+typedef struct cfi_feature_desc_header cfi_feature_desc_header_t; -+ -+/** -+ * This structure describes a NULL terminated string referenced by its id field. -+ * It is very similar to usb_string structure but has the id field type set to 16-bit. -+ */ -+struct cfi_string { -+ uint16_t id; -+ const uint8_t *s; -+}; -+typedef struct cfi_string cfi_string_t; -+ -+#endif ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_adp.c -@@ -0,0 +1,854 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.c $ -+ * $Revision: #12 $ -+ * $Date: 2011/10/26 $ -+ * $Change: 1873028 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#include "dwc_os.h" -+#include "dwc_otg_regs.h" -+#include "dwc_otg_cil.h" -+#include "dwc_otg_adp.h" -+ -+/** @file -+ * -+ * This file contains the most of the Attach Detect Protocol implementation for -+ * the driver to support OTG Rev2.0. -+ * -+ */ -+ -+void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value) -+{ -+ adpctl_data_t adpctl; -+ -+ adpctl.d32 = value; -+ adpctl.b.ar = 0x2; -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32); -+ -+ while (adpctl.b.ar) { -+ adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl); -+ } -+ -+} -+ -+/** -+ * Function is called to read ADP registers -+ */ -+uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if) -+{ -+ adpctl_data_t adpctl; -+ -+ adpctl.d32 = 0; -+ adpctl.b.ar = 0x1; -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32); -+ -+ while (adpctl.b.ar) { -+ adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl); -+ } -+ -+ return adpctl.d32; -+} -+ -+/** -+ * Function is called to read ADPCTL register and filter Write-clear bits -+ */ -+uint32_t dwc_otg_adp_read_reg_filter(dwc_otg_core_if_t * core_if) -+{ -+ adpctl_data_t adpctl; -+ -+ adpctl.d32 = dwc_otg_adp_read_reg(core_if); -+ adpctl.b.adp_tmout_int = 0; -+ adpctl.b.adp_prb_int = 0; -+ adpctl.b.adp_tmout_int = 0; -+ -+ return adpctl.d32; -+} -+ -+/** -+ * Function is called to write ADP registers -+ */ -+void dwc_otg_adp_modify_reg(dwc_otg_core_if_t * core_if, uint32_t clr, -+ uint32_t set) -+{ -+ dwc_otg_adp_write_reg(core_if, -+ (dwc_otg_adp_read_reg(core_if) & (~clr)) | set); -+} -+ -+static void adp_sense_timeout(void *ptr) -+{ -+ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; -+ core_if->adp.sense_timer_started = 0; -+ DWC_PRINTF("ADP SENSE TIMEOUT\n"); -+ if (core_if->adp_enable) { -+ dwc_otg_adp_sense_stop(core_if); -+ dwc_otg_adp_probe_start(core_if); -+ } -+} -+ -+/** -+ * This function is called when the ADP vbus timer expires. Timeout is 1.1s. -+ */ -+static void adp_vbuson_timeout(void *ptr) -+{ -+ gpwrdn_data_t gpwrdn; -+ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; -+ hprt0_data_t hprt0 = {.d32 = 0 }; -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ DWC_PRINTF("%s: 1.1 seconds expire after turning on VBUS\n",__FUNCTION__); -+ if (core_if) { -+ core_if->adp.vbuson_timer_started = 0; -+ /* Turn off vbus */ -+ hprt0.b.prtpwr = 1; -+ DWC_MODIFY_REG32(core_if->host_if->hprt0, hprt0.d32, 0); -+ gpwrdn.d32 = 0; -+ -+ /* Power off the core */ -+ if (core_if->power_down == 2) { -+ /* Enable Wakeup Logic */ -+// gpwrdn.b.wkupactiv = 1; -+ gpwrdn.b.pmuactv = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, -+ gpwrdn.d32); -+ -+ /* Suspend the Phy Clock */ -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); -+ -+ /* Switch on VDD */ -+// gpwrdn.b.wkupactiv = 1; -+ gpwrdn.b.pmuactv = 1; -+ gpwrdn.b.pwrdnrstn = 1; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, -+ gpwrdn.d32); -+ } else { -+ /* Enable Power Down Logic */ -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ } -+ -+ /* Power off the core */ -+ if (core_if->power_down == 2) { -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, -+ gpwrdn.d32, 0); -+ } -+ -+ /* Unmask SRP detected interrupt from Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.srp_det_msk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ -+ dwc_otg_adp_probe_start(core_if); -+ dwc_otg_dump_global_registers(core_if); -+ dwc_otg_dump_host_registers(core_if); -+ } -+ -+} -+ -+/** -+ * Start the ADP Initial Probe timer to detect if Port Connected interrupt is -+ * not asserted within 1.1 seconds. -+ * -+ * @param core_if the pointer to core_if strucure. -+ */ -+void dwc_otg_adp_vbuson_timer_start(dwc_otg_core_if_t * core_if) -+{ -+ core_if->adp.vbuson_timer_started = 1; -+ if (core_if->adp.vbuson_timer) -+ { -+ DWC_PRINTF("SCHEDULING VBUSON TIMER\n"); -+ /* 1.1 secs + 60ms necessary for cil_hcd_start*/ -+ DWC_TIMER_SCHEDULE(core_if->adp.vbuson_timer, 1160); -+ } else { -+ DWC_WARN("VBUSON_TIMER = %p\n",core_if->adp.vbuson_timer); -+ } -+} -+ -+#if 0 -+/** -+ * Masks all DWC OTG core interrupts -+ * -+ */ -+static void mask_all_interrupts(dwc_otg_core_if_t * core_if) -+{ -+ int i; -+ gahbcfg_data_t ahbcfg = {.d32 = 0 }; -+ -+ /* Mask Host Interrupts */ -+ -+ /* Clear and disable HCINTs */ -+ for (i = 0; i < core_if->core_params->host_channels; i++) { -+ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk, 0); -+ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcint, 0xFFFFFFFF); -+ -+ } -+ -+ /* Clear and disable HAINT */ -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk, 0x0000); -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haint, 0xFFFFFFFF); -+ -+ /* Mask Device Interrupts */ -+ if (!core_if->multiproc_int_enable) { -+ /* Clear and disable IN Endpoint interrupts */ -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, 0); -+ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]-> -+ diepint, 0xFFFFFFFF); -+ } -+ -+ /* Clear and disable OUT Endpoint interrupts */ -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, 0); -+ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]-> -+ doepint, 0xFFFFFFFF); -+ } -+ -+ /* Clear and disable DAINT */ -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daint, -+ 0xFFFFFFFF); -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, 0); -+ } else { -+ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> -+ diepeachintmsk[i], 0); -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]-> -+ diepint, 0xFFFFFFFF); -+ } -+ -+ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> -+ doepeachintmsk[i], 0); -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]-> -+ doepint, 0xFFFFFFFF); -+ } -+ -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachintmsk, -+ 0); -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachint, -+ 0xFFFFFFFF); -+ -+ } -+ -+ /* Disable interrupts */ -+ ahbcfg.b.glblintrmsk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0); -+ -+ /* Disable all interrupts. */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0); -+ -+ /* Clear any pending interrupts */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* Clear any pending OTG Interrupts */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, 0xFFFFFFFF); -+} -+ -+/** -+ * Unmask Port Connection Detected interrupt -+ * -+ */ -+static void unmask_conn_det_intr(dwc_otg_core_if_t * core_if) -+{ -+ gintmsk_data_t gintmsk = {.d32 = 0,.b.portintr = 1 }; -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32); -+} -+#endif -+ -+/** -+ * Starts the ADP Probing -+ * -+ * @param core_if the pointer to core_if structure. -+ */ -+uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if) -+{ -+ -+ adpctl_data_t adpctl = {.d32 = 0}; -+ gpwrdn_data_t gpwrdn; -+#if 0 -+ adpctl_data_t adpctl_int = {.d32 = 0, .b.adp_prb_int = 1, -+ .b.adp_sns_int = 1, b.adp_tmout_int}; -+#endif -+ dwc_otg_disable_global_interrupts(core_if); -+ DWC_PRINTF("ADP Probe Start\n"); -+ core_if->adp.probe_enabled = 1; -+ -+ adpctl.b.adpres = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ -+ while (adpctl.b.adpres) { -+ adpctl.d32 = dwc_otg_adp_read_reg(core_if); -+ } -+ -+ adpctl.d32 = 0; -+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ -+ /* In Host mode unmask SRP detected interrupt */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.sts_chngint_msk = 1; -+ if (!gpwrdn.b.idsts) { -+ gpwrdn.b.srp_det_msk = 1; -+ } -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ -+ adpctl.b.adp_tmout_int_msk = 1; -+ adpctl.b.adp_prb_int_msk = 1; -+ adpctl.b.prb_dschg = 1; -+ adpctl.b.prb_delta = 1; -+ adpctl.b.prb_per = 1; -+ adpctl.b.adpen = 1; -+ adpctl.b.enaprb = 1; -+ -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ DWC_PRINTF("ADP Probe Finish\n"); -+ return 0; -+} -+ -+/** -+ * Starts the ADP Sense timer to detect if ADP Sense interrupt is not asserted -+ * within 3 seconds. -+ * -+ * @param core_if the pointer to core_if strucure. -+ */ -+void dwc_otg_adp_sense_timer_start(dwc_otg_core_if_t * core_if) -+{ -+ core_if->adp.sense_timer_started = 1; -+ DWC_TIMER_SCHEDULE(core_if->adp.sense_timer, 3000 /* 3 secs */ ); -+} -+ -+/** -+ * Starts the ADP Sense -+ * -+ * @param core_if the pointer to core_if strucure. -+ */ -+uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if) -+{ -+ adpctl_data_t adpctl; -+ -+ DWC_PRINTF("ADP Sense Start\n"); -+ -+ /* Unmask ADP sense interrupt and mask all other from the core */ -+ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if); -+ adpctl.b.adp_sns_int_msk = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ dwc_otg_disable_global_interrupts(core_if); // vahrama -+ -+ /* Set ADP reset bit*/ -+ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if); -+ adpctl.b.adpres = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ -+ while (adpctl.b.adpres) { -+ adpctl.d32 = dwc_otg_adp_read_reg(core_if); -+ } -+ -+ adpctl.b.adpres = 0; -+ adpctl.b.adpen = 1; -+ adpctl.b.enasns = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ -+ dwc_otg_adp_sense_timer_start(core_if); -+ -+ return 0; -+} -+ -+/** -+ * Stops the ADP Probing -+ * -+ * @param core_if the pointer to core_if strucure. -+ */ -+uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if) -+{ -+ -+ adpctl_data_t adpctl; -+ DWC_PRINTF("Stop ADP probe\n"); -+ core_if->adp.probe_enabled = 0; -+ core_if->adp.probe_counter = 0; -+ adpctl.d32 = dwc_otg_adp_read_reg(core_if); -+ -+ adpctl.b.adpen = 0; -+ adpctl.b.adp_prb_int = 1; -+ adpctl.b.adp_tmout_int = 1; -+ adpctl.b.adp_sns_int = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ -+ return 0; -+} -+ -+/** -+ * Stops the ADP Sensing -+ * -+ * @param core_if the pointer to core_if strucure. -+ */ -+uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if) -+{ -+ adpctl_data_t adpctl; -+ -+ core_if->adp.sense_enabled = 0; -+ -+ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if); -+ adpctl.b.enasns = 0; -+ adpctl.b.adp_sns_int = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ -+ return 0; -+} -+ -+/** -+ * Called to turn on the VBUS after initial ADP probe in host mode. -+ * If port power was already enabled in cil_hcd_start function then -+ * only schedule a timer. -+ * -+ * @param core_if the pointer to core_if structure. -+ */ -+void dwc_otg_adp_turnon_vbus(dwc_otg_core_if_t * core_if) -+{ -+ hprt0_data_t hprt0 = {.d32 = 0 }; -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ DWC_PRINTF("Turn on VBUS for 1.1s, port power is %d\n", hprt0.b.prtpwr); -+ -+ if (hprt0.b.prtpwr == 0) { -+ hprt0.b.prtpwr = 1; -+ //DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ } -+ -+ dwc_otg_adp_vbuson_timer_start(core_if); -+} -+ -+/** -+ * Called right after driver is loaded -+ * to perform initial actions for ADP -+ * -+ * @param core_if the pointer to core_if structure. -+ * @param is_host - flag for current mode of operation either from GINTSTS or GPWRDN -+ */ -+void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host) -+{ -+ gpwrdn_data_t gpwrdn; -+ -+ DWC_PRINTF("ADP Initial Start\n"); -+ core_if->adp.adp_started = 1; -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ dwc_otg_disable_global_interrupts(core_if); -+ if (is_host) { -+ DWC_PRINTF("HOST MODE\n"); -+ /* Enable Power Down Logic Interrupt*/ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ /* Initialize first ADP probe to obtain Ramp Time value */ -+ core_if->adp.initial_probe = 1; -+ dwc_otg_adp_probe_start(core_if); -+ } else { -+ gotgctl_data_t gotgctl; -+ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+ DWC_PRINTF("DEVICE MODE\n"); -+ if (gotgctl.b.bsesvld == 0) { -+ /* Enable Power Down Logic Interrupt*/ -+ gpwrdn.d32 = 0; -+ DWC_PRINTF("VBUS is not valid - start ADP probe\n"); -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ core_if->adp.initial_probe = 1; -+ dwc_otg_adp_probe_start(core_if); -+ } else { -+ DWC_PRINTF("VBUS is valid - initialize core as a Device\n"); -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ dwc_otg_dump_global_registers(core_if); -+ dwc_otg_dump_dev_registers(core_if); -+ } -+ } -+} -+ -+void dwc_otg_adp_init(dwc_otg_core_if_t * core_if) -+{ -+ core_if->adp.adp_started = 0; -+ core_if->adp.initial_probe = 0; -+ core_if->adp.probe_timer_values[0] = -1; -+ core_if->adp.probe_timer_values[1] = -1; -+ core_if->adp.probe_enabled = 0; -+ core_if->adp.sense_enabled = 0; -+ core_if->adp.sense_timer_started = 0; -+ core_if->adp.vbuson_timer_started = 0; -+ core_if->adp.probe_counter = 0; -+ core_if->adp.gpwrdn = 0; -+ core_if->adp.attached = DWC_OTG_ADP_UNKOWN; -+ /* Initialize timers */ -+ core_if->adp.sense_timer = -+ DWC_TIMER_ALLOC("ADP SENSE TIMER", adp_sense_timeout, core_if); -+ core_if->adp.vbuson_timer = -+ DWC_TIMER_ALLOC("ADP VBUS ON TIMER", adp_vbuson_timeout, core_if); -+ if (!core_if->adp.sense_timer || !core_if->adp.vbuson_timer) -+ { -+ DWC_ERROR("Could not allocate memory for ADP timers\n"); -+ } -+} -+ -+void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if) -+{ -+ gpwrdn_data_t gpwrdn = { .d32 = 0 }; -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ if (core_if->adp.probe_enabled) -+ dwc_otg_adp_probe_stop(core_if); -+ if (core_if->adp.sense_enabled) -+ dwc_otg_adp_sense_stop(core_if); -+ if (core_if->adp.sense_timer_started) -+ DWC_TIMER_CANCEL(core_if->adp.sense_timer); -+ if (core_if->adp.vbuson_timer_started) -+ DWC_TIMER_CANCEL(core_if->adp.vbuson_timer); -+ DWC_TIMER_FREE(core_if->adp.sense_timer); -+ DWC_TIMER_FREE(core_if->adp.vbuson_timer); -+} -+ -+///////////////////////////////////////////////////////////////////// -+////////////// ADP Interrupt Handlers /////////////////////////////// -+///////////////////////////////////////////////////////////////////// -+/** -+ * This function sets Ramp Timer values -+ */ -+static uint32_t set_timer_value(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ if (core_if->adp.probe_timer_values[0] == -1) { -+ core_if->adp.probe_timer_values[0] = val; -+ core_if->adp.probe_timer_values[1] = -1; -+ return 1; -+ } else { -+ core_if->adp.probe_timer_values[1] = -+ core_if->adp.probe_timer_values[0]; -+ core_if->adp.probe_timer_values[0] = val; -+ return 0; -+ } -+} -+ -+/** -+ * This function compares Ramp Timer values -+ */ -+static uint32_t compare_timer_values(dwc_otg_core_if_t * core_if) -+{ -+ uint32_t diff; -+ if (core_if->adp.probe_timer_values[0]>=core_if->adp.probe_timer_values[1]) -+ diff = core_if->adp.probe_timer_values[0]-core_if->adp.probe_timer_values[1]; -+ else -+ diff = core_if->adp.probe_timer_values[1]-core_if->adp.probe_timer_values[0]; -+ if(diff < 2) { -+ return 0; -+ } else { -+ return 1; -+ } -+} -+ -+/** -+ * This function handles ADP Probe Interrupts -+ */ -+static int32_t dwc_otg_adp_handle_prb_intr(dwc_otg_core_if_t * core_if, -+ uint32_t val) -+{ -+ adpctl_data_t adpctl = {.d32 = 0 }; -+ gpwrdn_data_t gpwrdn, temp; -+ adpctl.d32 = val; -+ -+ temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ core_if->adp.probe_counter++; -+ core_if->adp.gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ if (adpctl.b.rtim == 0 && !temp.b.idsts){ -+ DWC_PRINTF("RTIM value is 0\n"); -+ goto exit; -+ } -+ if (set_timer_value(core_if, adpctl.b.rtim) && -+ core_if->adp.initial_probe) { -+ core_if->adp.initial_probe = 0; -+ dwc_otg_adp_probe_stop(core_if); -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* check which value is for device mode and which for Host mode */ -+ if (!temp.b.idsts) { /* considered host mode value is 0 */ -+ /* -+ * Turn on VBUS after initial ADP probe. -+ */ -+ core_if->op_state = A_HOST; -+ dwc_otg_enable_global_interrupts(core_if); -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_hcd_start(core_if); -+ dwc_otg_adp_turnon_vbus(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ } else { -+ /* -+ * Initiate SRP after initial ADP probe. -+ */ -+ dwc_otg_enable_global_interrupts(core_if); -+ dwc_otg_initiate_srp(core_if); -+ } -+ } else if (core_if->adp.probe_counter > 2){ -+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ if (compare_timer_values(core_if)) { -+ DWC_PRINTF("Difference in timer values !!! \n"); -+// core_if->adp.attached = DWC_OTG_ADP_ATTACHED; -+ dwc_otg_adp_probe_stop(core_if); -+ -+ /* Power on the core */ -+ if (core_if->power_down == 2) { -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ } -+ -+ /* check which value is for device mode and which for Host mode */ -+ if (!temp.b.idsts) { /* considered host mode value is 0 */ -+ /* Disable Interrupt from Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, gpwrdn.d32, 0); -+ -+ /* -+ * Initialize the Core for Host mode. -+ */ -+ core_if->op_state = A_HOST; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_hcd_start(core_if); -+ } else { -+ gotgctl_data_t gotgctl; -+ /* Mask SRP detected interrupt from Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.srp_det_msk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, gpwrdn.d32, 0); -+ -+ /* Disable Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, gpwrdn.d32, 0); -+ -+ /* -+ * Initialize the Core for Device mode. -+ */ -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ -+ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+ if (!gotgctl.b.bsesvld) { -+ dwc_otg_initiate_srp(core_if); -+ } -+ } -+ } -+ if (core_if->power_down == 2) { -+ if (gpwrdn.b.bsessvld) { -+ /* Mask SRP detected interrupt from Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.srp_det_msk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Disable Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* -+ * Initialize the Core for Device mode. -+ */ -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ } -+ } -+ } -+exit: -+ /* Clear interrupt */ -+ adpctl.d32 = dwc_otg_adp_read_reg(core_if); -+ adpctl.b.adp_prb_int = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ -+ return 0; -+} -+ -+/** -+ * This function hadles ADP Sense Interrupt -+ */ -+static int32_t dwc_otg_adp_handle_sns_intr(dwc_otg_core_if_t * core_if) -+{ -+ adpctl_data_t adpctl; -+ /* Stop ADP Sense timer */ -+ DWC_TIMER_CANCEL(core_if->adp.sense_timer); -+ -+ /* Restart ADP Sense timer */ -+ dwc_otg_adp_sense_timer_start(core_if); -+ -+ /* Clear interrupt */ -+ adpctl.d32 = dwc_otg_adp_read_reg(core_if); -+ adpctl.b.adp_sns_int = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ -+ return 0; -+} -+ -+/** -+ * This function handles ADP Probe Interrupts -+ */ -+static int32_t dwc_otg_adp_handle_prb_tmout_intr(dwc_otg_core_if_t * core_if, -+ uint32_t val) -+{ -+ adpctl_data_t adpctl = {.d32 = 0 }; -+ adpctl.d32 = val; -+ set_timer_value(core_if, adpctl.b.rtim); -+ -+ /* Clear interrupt */ -+ adpctl.d32 = dwc_otg_adp_read_reg(core_if); -+ adpctl.b.adp_tmout_int = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ -+ return 0; -+} -+ -+/** -+ * ADP Interrupt handler. -+ * -+ */ -+int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if) -+{ -+ int retval = 0; -+ adpctl_data_t adpctl = {.d32 = 0}; -+ -+ adpctl.d32 = dwc_otg_adp_read_reg(core_if); -+ DWC_PRINTF("ADPCTL = %08x\n",adpctl.d32); -+ -+ if (adpctl.b.adp_sns_int & adpctl.b.adp_sns_int_msk) { -+ DWC_PRINTF("ADP Sense interrupt\n"); -+ retval |= dwc_otg_adp_handle_sns_intr(core_if); -+ } -+ if (adpctl.b.adp_tmout_int & adpctl.b.adp_tmout_int_msk) { -+ DWC_PRINTF("ADP timeout interrupt\n"); -+ retval |= dwc_otg_adp_handle_prb_tmout_intr(core_if, adpctl.d32); -+ } -+ if (adpctl.b.adp_prb_int & adpctl.b.adp_prb_int_msk) { -+ DWC_PRINTF("ADP Probe interrupt\n"); -+ adpctl.b.adp_prb_int = 1; -+ retval |= dwc_otg_adp_handle_prb_intr(core_if, adpctl.d32); -+ } -+ -+// dwc_otg_adp_modify_reg(core_if, adpctl.d32, 0); -+ //dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ DWC_PRINTF("RETURN FROM ADP ISR\n"); -+ -+ return retval; -+} -+ -+/** -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if) -+{ -+ -+#ifndef DWC_HOST_ONLY -+ hprt0_data_t hprt0; -+ gpwrdn_data_t gpwrdn; -+ DWC_DEBUGPL(DBG_ANY, "++ Power Down Logic Session Request Interrupt++\n"); -+ -+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ /* check which value is for device mode and which for Host mode */ -+ if (!gpwrdn.b.idsts) { /* considered host mode value is 0 */ -+ DWC_PRINTF("SRP: Host mode\n"); -+ -+ if (core_if->adp_enable) { -+ dwc_otg_adp_probe_stop(core_if); -+ -+ /* Power on the core */ -+ if (core_if->power_down == 2) { -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ } -+ -+ core_if->op_state = A_HOST; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_hcd_start(core_if); -+ } -+ -+ /* Turn on the port power bit. */ -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtpwr = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ -+ /* Start the Connection timer. So a message can be displayed -+ * if connect does not occur within 10 seconds. */ -+ cil_hcd_session_start(core_if); -+ } else { -+ DWC_PRINTF("SRP: Device mode %s\n", __FUNCTION__); -+ if (core_if->adp_enable) { -+ dwc_otg_adp_probe_stop(core_if); -+ -+ /* Power on the core */ -+ if (core_if->power_down == 2) { -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ } -+ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 0; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, -+ gpwrdn.d32); -+ -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ } -+ } -+#endif -+ return 1; -+} ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_adp.h -@@ -0,0 +1,80 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.h $ -+ * $Revision: #7 $ -+ * $Date: 2011/10/24 $ -+ * $Change: 1871159 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#ifndef __DWC_OTG_ADP_H__ -+#define __DWC_OTG_ADP_H__ -+ -+/** -+ * @file -+ * -+ * This file contains the Attach Detect Protocol interfaces and defines -+ * (functions) and structures for Linux. -+ * -+ */ -+ -+#define DWC_OTG_ADP_UNATTACHED 0 -+#define DWC_OTG_ADP_ATTACHED 1 -+#define DWC_OTG_ADP_UNKOWN 2 -+ -+typedef struct dwc_otg_adp { -+ uint32_t adp_started; -+ uint32_t initial_probe; -+ int32_t probe_timer_values[2]; -+ uint32_t probe_enabled; -+ uint32_t sense_enabled; -+ dwc_timer_t *sense_timer; -+ uint32_t sense_timer_started; -+ dwc_timer_t *vbuson_timer; -+ uint32_t vbuson_timer_started; -+ uint32_t attached; -+ uint32_t probe_counter; -+ uint32_t gpwrdn; -+} dwc_otg_adp_t; -+ -+/** -+ * Attach Detect Protocol functions -+ */ -+ -+extern void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value); -+extern uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if); -+extern uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if); -+extern uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if); -+extern uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if); -+extern uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host); -+extern void dwc_otg_adp_init(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if); -+extern int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if); -+extern int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if); -+ -+#endif //__DWC_OTG_ADP_H__ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_attr.c -@@ -0,0 +1,1210 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $ -+ * $Revision: #44 $ -+ * $Date: 2010/11/29 $ -+ * $Change: 1636033 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+/** @file -+ * -+ * The diagnostic interface will provide access to the controller for -+ * bringing up the hardware and testing. The Linux driver attributes -+ * feature will be used to provide the Linux Diagnostic -+ * Interface. These attributes are accessed through sysfs. -+ */ -+ -+/** @page "Linux Module Attributes" -+ * -+ * The Linux module attributes feature is used to provide the Linux -+ * Diagnostic Interface. These attributes are accessed through sysfs. -+ * The diagnostic interface will provide access to the controller for -+ * bringing up the hardware and testing. -+ -+ The following table shows the attributes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
Name Description Access
mode Returns the current mode: 0 for device mode, 1 for host mode Read
hnpcapable Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register. -+ Read returns the current value. Read/Write
srpcapable Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register. -+ Read returns the current value. Read/Write
hsic_connect Gets or sets the "HSIC-Connect" bit in the GLPMCFG Register. -+ Read returns the current value. Read/Write
inv_sel_hsic Gets or sets the "Invert Select HSIC" bit in the GLPMFG Register. -+ Read returns the current value. Read/Write
hnp Initiates the Host Negotiation Protocol. Read returns the status. Read/Write
srp Initiates the Session Request Protocol. Read returns the status. Read/Write
buspower Gets or sets the Power State of the bus (0 - Off or 1 - On) Read/Write
bussuspend Suspends the USB bus. Read/Write
busconnected Gets the connection status of the bus Read
gotgctl Gets or sets the Core Control Status Register. Read/Write
gusbcfg Gets or sets the Core USB Configuration Register Read/Write
grxfsiz Gets or sets the Receive FIFO Size Register Read/Write
gnptxfsiz Gets or sets the non-periodic Transmit Size Register Read/Write
gpvndctl Gets or sets the PHY Vendor Control Register Read/Write
ggpio Gets the value in the lower 16-bits of the General Purpose IO Register -+ or sets the upper 16 bits. Read/Write
guid Gets or sets the value of the User ID Register Read/Write
gsnpsid Gets the value of the Synopsys ID Regester Read
devspeed Gets or sets the device speed setting in the DCFG register Read/Write
enumspeed Gets the device enumeration Speed. Read
hptxfsiz Gets the value of the Host Periodic Transmit FIFO Read
hprt0 Gets or sets the value in the Host Port Control and Status Register Read/Write
regoffset Sets the register offset for the next Register Access Read/Write
regvalue Gets or sets the value of the register at the offset in the regoffset attribute. Read/Write
remote_wakeup On read, shows the status of Remote Wakeup. On write, initiates a remote -+ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote -+ Wakeup signalling bit in the Device Control Register is set for 1 -+ milli-second. Read/Write
rem_wakeup_pwrdn On read, shows the status core - hibernated or not. On write, initiates -+ a remote wakeup of the device from Hibernation. Read/Write
mode_ch_tim_en This bit is used to enable or disable the host core to wait for 200 PHY -+ clock cycles at the end of Resume to change the opmode signal to the PHY to 00 -+ after Suspend or LPM. Read/Write
fr_interval On read, shows the value of HFIR Frame Interval. On write, dynamically -+ reload HFIR register during runtime. The application can write a value to this -+ register only after the Port Enable bit of the Host Port Control and Status -+ register (HPRT.PrtEnaPort) has been set Read/Write
disconnect_us On read, shows the status of disconnect_device_us. On write, sets disconnect_us -+ which causes soft disconnect for 100us. Applicable only for device mode of operation. Read/Write
regdump Dumps the contents of core registers. Read
spramdump Dumps the contents of core registers. Read
hcddump Dumps the current HCD state. Read
hcd_frrem Shows the average value of the Frame Remaining -+ field in the Host Frame Number/Frame Remaining register when an SOF interrupt -+ occurs. This can be used to determine the average interrupt latency. Also -+ shows the average Frame Remaining value for start_transfer and the "a" and -+ "b" sample points. The "a" and "b" sample points may be used during debugging -+ bto determine how long it takes to execute a section of the HCD code. Read
rd_reg_test Displays the time required to read the GNPTXFSIZ register many times -+ (the output shows the number of times the register is read). -+ Read
wr_reg_test Displays the time required to write the GNPTXFSIZ register many times -+ (the output shows the number of times the register is written). -+ Read
lpm_response Gets or sets lpm_response mode. Applicable only in device mode. -+ Write
sleep_status Shows sleep status of device. -+ Read
-+ -+ Example usage: -+ To get the current mode: -+ cat /sys/devices/lm0/mode -+ -+ To power down the USB: -+ echo 0 > /sys/devices/lm0/buspower -+ */ -+ -+#include "dwc_otg_os_dep.h" -+#include "dwc_os.h" -+#include "dwc_otg_driver.h" -+#include "dwc_otg_attr.h" -+#include "dwc_otg_core_if.h" -+#include "dwc_otg_pcd_if.h" -+#include "dwc_otg_hcd_if.h" -+ -+/* -+ * MACROs for defining sysfs attribute -+ */ -+#ifdef LM_INTERFACE -+ -+#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ -+{ \ -+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ -+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ -+ uint32_t val; \ -+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ -+ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ -+} -+#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ -+ const char *buf, size_t count) \ -+{ \ -+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ -+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ -+ uint32_t set = simple_strtoul(buf, NULL, 16); \ -+ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ -+ return count; \ -+} -+ -+#elif defined(PCI_INTERFACE) -+ -+#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ -+{ \ -+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ -+ uint32_t val; \ -+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ -+ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ -+} -+#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ -+ const char *buf, size_t count) \ -+{ \ -+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ -+ uint32_t set = simple_strtoul(buf, NULL, 16); \ -+ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ -+ return count; \ -+} -+ -+#elif defined(PLATFORM_INTERFACE) -+ -+#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ -+{ \ -+ struct platform_device *platform_dev = \ -+ container_of(_dev, struct platform_device, dev); \ -+ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ -+ uint32_t val; \ -+ DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \ -+ __func__, _dev, platform_dev, otg_dev); \ -+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ -+ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ -+} -+#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ -+ const char *buf, size_t count) \ -+{ \ -+ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ -+ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ -+ uint32_t set = simple_strtoul(buf, NULL, 16); \ -+ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ -+ return count; \ -+} -+#endif -+ -+/* -+ * MACROs for defining sysfs attribute for 32-bit registers -+ */ -+#ifdef LM_INTERFACE -+#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ -+{ \ -+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ -+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ -+ uint32_t val; \ -+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ -+ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ -+} -+#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ -+ const char *buf, size_t count) \ -+{ \ -+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ -+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ -+ uint32_t val = simple_strtoul(buf, NULL, 16); \ -+ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ -+ return count; \ -+} -+#elif defined(PCI_INTERFACE) -+#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ -+{ \ -+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ -+ uint32_t val; \ -+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ -+ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ -+} -+#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ -+ const char *buf, size_t count) \ -+{ \ -+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ -+ uint32_t val = simple_strtoul(buf, NULL, 16); \ -+ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ -+ return count; \ -+} -+ -+#elif defined(PLATFORM_INTERFACE) -+#include "dwc_otg_dbg.h" -+#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ -+{ \ -+ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ -+ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ -+ uint32_t val; \ -+ DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \ -+ __func__, _dev, platform_dev, otg_dev); \ -+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ -+ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ -+} -+#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ -+ const char *buf, size_t count) \ -+{ \ -+ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ -+ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ -+ uint32_t val = simple_strtoul(buf, NULL, 16); \ -+ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ -+ return count; \ -+} -+ -+#endif -+ -+#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_string_) \ -+DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ -+DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ -+DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); -+ -+#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_string_) \ -+DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ -+DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); -+ -+#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \ -+DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ -+DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ -+DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); -+ -+#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \ -+DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ -+DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); -+ -+/** @name Functions for Show/Store of Attributes */ -+/**@{*/ -+ -+/** -+ * Helper function returning the otg_device structure of the given device -+ */ -+static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev) -+{ -+ dwc_otg_device_t *otg_dev; -+ DWC_OTG_GETDRVDEV(otg_dev, _dev); -+ return otg_dev; -+} -+ -+/** -+ * Show the register offset of the Register Access. -+ */ -+static ssize_t regoffset_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ return snprintf(buf, sizeof("0xFFFFFFFF\n") + 1, "0x%08x\n", -+ otg_dev->os_dep.reg_offset); -+} -+ -+/** -+ * Set the register offset for the next Register Access Read/Write -+ */ -+static ssize_t regoffset_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t offset = simple_strtoul(buf, NULL, 16); -+#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) -+ if (offset < SZ_256K) { -+#elif defined(PCI_INTERFACE) -+ if (offset < 0x00040000) { -+#endif -+ otg_dev->os_dep.reg_offset = offset; -+ } else { -+ dev_err(_dev, "invalid offset\n"); -+ } -+ -+ return count; -+} -+ -+DEVICE_ATTR(regoffset, S_IRUGO | S_IWUSR, regoffset_show, regoffset_store); -+ -+/** -+ * Show the value of the register at the offset in the reg_offset -+ * attribute. -+ */ -+static ssize_t regvalue_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t val; -+ volatile uint32_t *addr; -+ -+ if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) { -+ /* Calculate the address */ -+ addr = (uint32_t *) (otg_dev->os_dep.reg_offset + -+ (uint8_t *) otg_dev->os_dep.base); -+ val = DWC_READ_REG32(addr); -+ return snprintf(buf, -+ sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n") + 1, -+ "Reg@0x%06x = 0x%08x\n", otg_dev->os_dep.reg_offset, -+ val); -+ } else { -+ dev_err(_dev, "Invalid offset (0x%0x)\n", otg_dev->os_dep.reg_offset); -+ return sprintf(buf, "invalid offset\n"); -+ } -+} -+ -+/** -+ * Store the value in the register at the offset in the reg_offset -+ * attribute. -+ * -+ */ -+static ssize_t regvalue_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ volatile uint32_t *addr; -+ uint32_t val = simple_strtoul(buf, NULL, 16); -+ //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val); -+ if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) { -+ /* Calculate the address */ -+ addr = (uint32_t *) (otg_dev->os_dep.reg_offset + -+ (uint8_t *) otg_dev->os_dep.base); -+ DWC_WRITE_REG32(addr, val); -+ } else { -+ dev_err(_dev, "Invalid Register Offset (0x%08x)\n", -+ otg_dev->os_dep.reg_offset); -+ } -+ return count; -+} -+ -+DEVICE_ATTR(regvalue, S_IRUGO | S_IWUSR, regvalue_show, regvalue_store); -+ -+/* -+ * Attributes -+ */ -+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode, "Mode"); -+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable, "HNPCapable"); -+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable, "SRPCapable"); -+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hsic_connect, "HSIC Connect"); -+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(inv_sel_hsic, "Invert Select HSIC"); -+ -+//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); -+//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); -+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected, "Bus Connected"); -+ -+DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl, 0, "GOTGCTL"); -+DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg, -+ &(otg_dev->core_if->core_global_regs->gusbcfg), -+ "GUSBCFG"); -+DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz, -+ &(otg_dev->core_if->core_global_regs->grxfsiz), -+ "GRXFSIZ"); -+DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz, -+ &(otg_dev->core_if->core_global_regs->gnptxfsiz), -+ "GNPTXFSIZ"); -+DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl, -+ &(otg_dev->core_if->core_global_regs->gpvndctl), -+ "GPVNDCTL"); -+DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio, -+ &(otg_dev->core_if->core_global_regs->ggpio), -+ "GGPIO"); -+DWC_OTG_DEVICE_ATTR_REG32_RW(guid, &(otg_dev->core_if->core_global_regs->guid), -+ "GUID"); -+DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid, -+ &(otg_dev->core_if->core_global_regs->gsnpsid), -+ "GSNPSID"); -+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed, "Device Speed"); -+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed, "Device Enumeration Speed"); -+ -+DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz, -+ &(otg_dev->core_if->core_global_regs->hptxfsiz), -+ "HPTXFSIZ"); -+DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0, otg_dev->core_if->host_if->hprt0, "HPRT0"); -+ -+/** -+ * @todo Add code to initiate the HNP. -+ */ -+/** -+ * Show the HNP status bit -+ */ -+static ssize_t hnp_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ return sprintf(buf, "HstNegScs = 0x%x\n", -+ dwc_otg_get_hnpstatus(otg_dev->core_if)); -+} -+ -+/** -+ * Set the HNP Request bit -+ */ -+static ssize_t hnp_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t in = simple_strtoul(buf, NULL, 16); -+ dwc_otg_set_hnpreq(otg_dev->core_if, in); -+ return count; -+} -+ -+DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store); -+ -+/** -+ * @todo Add code to initiate the SRP. -+ */ -+/** -+ * Show the SRP status bit -+ */ -+static ssize_t srp_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+#ifndef DWC_HOST_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ return sprintf(buf, "SesReqScs = 0x%x\n", -+ dwc_otg_get_srpstatus(otg_dev->core_if)); -+#else -+ return sprintf(buf, "Host Only Mode!\n"); -+#endif -+} -+ -+/** -+ * Set the SRP Request bit -+ */ -+static ssize_t srp_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+#ifndef DWC_HOST_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ dwc_otg_pcd_initiate_srp(otg_dev->pcd); -+#endif -+ return count; -+} -+ -+DEVICE_ATTR(srp, 0644, srp_show, srp_store); -+ -+/** -+ * @todo Need to do more for power on/off? -+ */ -+/** -+ * Show the Bus Power status -+ */ -+static ssize_t buspower_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ return sprintf(buf, "Bus Power = 0x%x\n", -+ dwc_otg_get_prtpower(otg_dev->core_if)); -+} -+ -+/** -+ * Set the Bus Power status -+ */ -+static ssize_t buspower_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t on = simple_strtoul(buf, NULL, 16); -+ dwc_otg_set_prtpower(otg_dev->core_if, on); -+ return count; -+} -+ -+DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store); -+ -+/** -+ * @todo Need to do more for suspend? -+ */ -+/** -+ * Show the Bus Suspend status -+ */ -+static ssize_t bussuspend_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ return sprintf(buf, "Bus Suspend = 0x%x\n", -+ dwc_otg_get_prtsuspend(otg_dev->core_if)); -+} -+ -+/** -+ * Set the Bus Suspend status -+ */ -+static ssize_t bussuspend_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t in = simple_strtoul(buf, NULL, 16); -+ dwc_otg_set_prtsuspend(otg_dev->core_if, in); -+ return count; -+} -+ -+DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store); -+ -+/** -+ * Show the Mode Change Ready Timer status -+ */ -+static ssize_t mode_ch_tim_en_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ return sprintf(buf, "Mode Change Ready Timer Enable = 0x%x\n", -+ dwc_otg_get_mode_ch_tim(otg_dev->core_if)); -+} -+ -+/** -+ * Set the Mode Change Ready Timer status -+ */ -+static ssize_t mode_ch_tim_en_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t in = simple_strtoul(buf, NULL, 16); -+ dwc_otg_set_mode_ch_tim(otg_dev->core_if, in); -+ return count; -+} -+ -+DEVICE_ATTR(mode_ch_tim_en, 0644, mode_ch_tim_en_show, mode_ch_tim_en_store); -+ -+/** -+ * Show the value of HFIR Frame Interval bitfield -+ */ -+static ssize_t fr_interval_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ return sprintf(buf, "Frame Interval = 0x%x\n", -+ dwc_otg_get_fr_interval(otg_dev->core_if)); -+} -+ -+/** -+ * Set the HFIR Frame Interval value -+ */ -+static ssize_t fr_interval_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t in = simple_strtoul(buf, NULL, 10); -+ dwc_otg_set_fr_interval(otg_dev->core_if, in); -+ return count; -+} -+ -+DEVICE_ATTR(fr_interval, 0644, fr_interval_show, fr_interval_store); -+ -+/** -+ * Show the status of Remote Wakeup. -+ */ -+static ssize_t remote_wakeup_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+#ifndef DWC_HOST_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ -+ return sprintf(buf, -+ "Remote Wakeup Sig = %d Enabled = %d LPM Remote Wakeup = %d\n", -+ dwc_otg_get_remotewakesig(otg_dev->core_if), -+ dwc_otg_pcd_get_rmwkup_enable(otg_dev->pcd), -+ dwc_otg_get_lpm_remotewakeenabled(otg_dev->core_if)); -+#else -+ return sprintf(buf, "Host Only Mode!\n"); -+#endif /* DWC_HOST_ONLY */ -+} -+ -+/** -+ * Initiate a remote wakeup of the host. The Device control register -+ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable -+ * flag is set. -+ * -+ */ -+static ssize_t remote_wakeup_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+#ifndef DWC_HOST_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t val = simple_strtoul(buf, NULL, 16); -+ -+ if (val & 1) { -+ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1); -+ } else { -+ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0); -+ } -+#endif /* DWC_HOST_ONLY */ -+ return count; -+} -+ -+DEVICE_ATTR(remote_wakeup, S_IRUGO | S_IWUSR, remote_wakeup_show, -+ remote_wakeup_store); -+ -+/** -+ * Show the whether core is hibernated or not. -+ */ -+static ssize_t rem_wakeup_pwrdn_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+#ifndef DWC_HOST_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ -+ if (dwc_otg_get_core_state(otg_dev->core_if)) { -+ DWC_PRINTF("Core is in hibernation\n"); -+ } else { -+ DWC_PRINTF("Core is not in hibernation\n"); -+ } -+#endif /* DWC_HOST_ONLY */ -+ return 0; -+} -+ -+extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, -+ int rem_wakeup, int reset); -+ -+/** -+ * Initiate a remote wakeup of the device to exit from hibernation. -+ */ -+static ssize_t rem_wakeup_pwrdn_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+#ifndef DWC_HOST_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ dwc_otg_device_hibernation_restore(otg_dev->core_if, 1, 0); -+#endif -+ return count; -+} -+ -+DEVICE_ATTR(rem_wakeup_pwrdn, S_IRUGO | S_IWUSR, rem_wakeup_pwrdn_show, -+ rem_wakeup_pwrdn_store); -+ -+static ssize_t disconnect_us(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ -+#ifndef DWC_HOST_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t val = simple_strtoul(buf, NULL, 16); -+ DWC_PRINTF("The Passed value is %04x\n", val); -+ -+ dwc_otg_pcd_disconnect_us(otg_dev->pcd, 50); -+ -+#endif /* DWC_HOST_ONLY */ -+ return count; -+} -+ -+DEVICE_ATTR(disconnect_us, S_IWUSR, 0, disconnect_us); -+ -+/** -+ * Dump global registers and either host or device registers (depending on the -+ * current mode of the core). -+ */ -+static ssize_t regdump_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ -+ dwc_otg_dump_global_registers(otg_dev->core_if); -+ if (dwc_otg_is_host_mode(otg_dev->core_if)) { -+ dwc_otg_dump_host_registers(otg_dev->core_if); -+ } else { -+ dwc_otg_dump_dev_registers(otg_dev->core_if); -+ -+ } -+ return sprintf(buf, "Register Dump\n"); -+} -+ -+DEVICE_ATTR(regdump, S_IRUGO, regdump_show, 0); -+ -+/** -+ * Dump global registers and either host or device registers (depending on the -+ * current mode of the core). -+ */ -+static ssize_t spramdump_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ -+ //dwc_otg_dump_spram(otg_dev->core_if); -+ -+ return sprintf(buf, "SPRAM Dump\n"); -+} -+ -+DEVICE_ATTR(spramdump, S_IRUGO, spramdump_show, 0); -+ -+/** -+ * Dump the current hcd state. -+ */ -+static ssize_t hcddump_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+#ifndef DWC_DEVICE_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ dwc_otg_hcd_dump_state(otg_dev->hcd); -+#endif /* DWC_DEVICE_ONLY */ -+ return sprintf(buf, "HCD Dump\n"); -+} -+ -+DEVICE_ATTR(hcddump, S_IRUGO, hcddump_show, 0); -+ -+/** -+ * Dump the average frame remaining at SOF. This can be used to -+ * determine average interrupt latency. Frame remaining is also shown for -+ * start transfer and two additional sample points. -+ */ -+static ssize_t hcd_frrem_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+#ifndef DWC_DEVICE_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ -+ dwc_otg_hcd_dump_frrem(otg_dev->hcd); -+#endif /* DWC_DEVICE_ONLY */ -+ return sprintf(buf, "HCD Dump Frame Remaining\n"); -+} -+ -+DEVICE_ATTR(hcd_frrem, S_IRUGO, hcd_frrem_show, 0); -+ -+/** -+ * Displays the time required to read the GNPTXFSIZ register many times (the -+ * output shows the number of times the register is read). -+ */ -+#define RW_REG_COUNT 10000000 -+#define MSEC_PER_JIFFIE 1000/HZ -+static ssize_t rd_reg_test_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ int i; -+ int time; -+ int start_jiffies; -+ -+ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", -+ HZ, MSEC_PER_JIFFIE, loops_per_jiffy); -+ start_jiffies = jiffies; -+ for (i = 0; i < RW_REG_COUNT; i++) { -+ dwc_otg_get_gnptxfsiz(otg_dev->core_if); -+ } -+ time = jiffies - start_jiffies; -+ return sprintf(buf, -+ "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", -+ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time); -+} -+ -+DEVICE_ATTR(rd_reg_test, S_IRUGO, rd_reg_test_show, 0); -+ -+/** -+ * Displays the time required to write the GNPTXFSIZ register many times (the -+ * output shows the number of times the register is written). -+ */ -+static ssize_t wr_reg_test_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t reg_val; -+ int i; -+ int time; -+ int start_jiffies; -+ -+ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", -+ HZ, MSEC_PER_JIFFIE, loops_per_jiffy); -+ reg_val = dwc_otg_get_gnptxfsiz(otg_dev->core_if); -+ start_jiffies = jiffies; -+ for (i = 0; i < RW_REG_COUNT; i++) { -+ dwc_otg_set_gnptxfsiz(otg_dev->core_if, reg_val); -+ } -+ time = jiffies - start_jiffies; -+ return sprintf(buf, -+ "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", -+ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time); -+} -+ -+DEVICE_ATTR(wr_reg_test, S_IRUGO, wr_reg_test_show, 0); -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ -+/** -+* Show the lpm_response attribute. -+*/ -+static ssize_t lpmresp_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ -+ if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) -+ return sprintf(buf, "** LPM is DISABLED **\n"); -+ -+ if (!dwc_otg_is_device_mode(otg_dev->core_if)) { -+ return sprintf(buf, "** Current mode is not device mode\n"); -+ } -+ return sprintf(buf, "lpm_response = %d\n", -+ dwc_otg_get_lpmresponse(otg_dev->core_if)); -+} -+ -+/** -+* Store the lpm_response attribute. -+*/ -+static ssize_t lpmresp_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t val = simple_strtoul(buf, NULL, 16); -+ -+ if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) { -+ return 0; -+ } -+ -+ if (!dwc_otg_is_device_mode(otg_dev->core_if)) { -+ return 0; -+ } -+ -+ dwc_otg_set_lpmresponse(otg_dev->core_if, val); -+ return count; -+} -+ -+DEVICE_ATTR(lpm_response, S_IRUGO | S_IWUSR, lpmresp_show, lpmresp_store); -+ -+/** -+* Show the sleep_status attribute. -+*/ -+static ssize_t sleepstatus_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ return sprintf(buf, "Sleep Status = %d\n", -+ dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)); -+} -+ -+/** -+ * Store the sleep_status attribure. -+ */ -+static ssize_t sleepstatus_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ dwc_otg_core_if_t *core_if = otg_dev->core_if; -+ -+ if (dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)) { -+ if (dwc_otg_is_host_mode(core_if)) { -+ -+ DWC_PRINTF("Host initiated resume\n"); -+ dwc_otg_set_prtresume(otg_dev->core_if, 1); -+ } -+ } -+ -+ return count; -+} -+ -+DEVICE_ATTR(sleep_status, S_IRUGO | S_IWUSR, sleepstatus_show, -+ sleepstatus_store); -+ -+#endif /* CONFIG_USB_DWC_OTG_LPM_ENABLE */ -+ -+/**@}*/ -+ -+/** -+ * Create the device files -+ */ -+void dwc_otg_attr_create( -+#ifdef LM_INTERFACE -+ struct lm_device *dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *dev -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *dev -+#endif -+ ) -+{ -+ int error; -+ -+ error = device_create_file(&dev->dev, &dev_attr_regoffset); -+ error = device_create_file(&dev->dev, &dev_attr_regvalue); -+ error = device_create_file(&dev->dev, &dev_attr_mode); -+ error = device_create_file(&dev->dev, &dev_attr_hnpcapable); -+ error = device_create_file(&dev->dev, &dev_attr_srpcapable); -+ error = device_create_file(&dev->dev, &dev_attr_hsic_connect); -+ error = device_create_file(&dev->dev, &dev_attr_inv_sel_hsic); -+ error = device_create_file(&dev->dev, &dev_attr_hnp); -+ error = device_create_file(&dev->dev, &dev_attr_srp); -+ error = device_create_file(&dev->dev, &dev_attr_buspower); -+ error = device_create_file(&dev->dev, &dev_attr_bussuspend); -+ error = device_create_file(&dev->dev, &dev_attr_mode_ch_tim_en); -+ error = device_create_file(&dev->dev, &dev_attr_fr_interval); -+ error = device_create_file(&dev->dev, &dev_attr_busconnected); -+ error = device_create_file(&dev->dev, &dev_attr_gotgctl); -+ error = device_create_file(&dev->dev, &dev_attr_gusbcfg); -+ error = device_create_file(&dev->dev, &dev_attr_grxfsiz); -+ error = device_create_file(&dev->dev, &dev_attr_gnptxfsiz); -+ error = device_create_file(&dev->dev, &dev_attr_gpvndctl); -+ error = device_create_file(&dev->dev, &dev_attr_ggpio); -+ error = device_create_file(&dev->dev, &dev_attr_guid); -+ error = device_create_file(&dev->dev, &dev_attr_gsnpsid); -+ error = device_create_file(&dev->dev, &dev_attr_devspeed); -+ error = device_create_file(&dev->dev, &dev_attr_enumspeed); -+ error = device_create_file(&dev->dev, &dev_attr_hptxfsiz); -+ error = device_create_file(&dev->dev, &dev_attr_hprt0); -+ error = device_create_file(&dev->dev, &dev_attr_remote_wakeup); -+ error = device_create_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn); -+ error = device_create_file(&dev->dev, &dev_attr_disconnect_us); -+ error = device_create_file(&dev->dev, &dev_attr_regdump); -+ error = device_create_file(&dev->dev, &dev_attr_spramdump); -+ error = device_create_file(&dev->dev, &dev_attr_hcddump); -+ error = device_create_file(&dev->dev, &dev_attr_hcd_frrem); -+ error = device_create_file(&dev->dev, &dev_attr_rd_reg_test); -+ error = device_create_file(&dev->dev, &dev_attr_wr_reg_test); -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ error = device_create_file(&dev->dev, &dev_attr_lpm_response); -+ error = device_create_file(&dev->dev, &dev_attr_sleep_status); -+#endif -+} -+ -+/** -+ * Remove the device files -+ */ -+void dwc_otg_attr_remove( -+#ifdef LM_INTERFACE -+ struct lm_device *dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *dev -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *dev -+#endif -+ ) -+{ -+ device_remove_file(&dev->dev, &dev_attr_regoffset); -+ device_remove_file(&dev->dev, &dev_attr_regvalue); -+ device_remove_file(&dev->dev, &dev_attr_mode); -+ device_remove_file(&dev->dev, &dev_attr_hnpcapable); -+ device_remove_file(&dev->dev, &dev_attr_srpcapable); -+ device_remove_file(&dev->dev, &dev_attr_hsic_connect); -+ device_remove_file(&dev->dev, &dev_attr_inv_sel_hsic); -+ device_remove_file(&dev->dev, &dev_attr_hnp); -+ device_remove_file(&dev->dev, &dev_attr_srp); -+ device_remove_file(&dev->dev, &dev_attr_buspower); -+ device_remove_file(&dev->dev, &dev_attr_bussuspend); -+ device_remove_file(&dev->dev, &dev_attr_mode_ch_tim_en); -+ device_remove_file(&dev->dev, &dev_attr_fr_interval); -+ device_remove_file(&dev->dev, &dev_attr_busconnected); -+ device_remove_file(&dev->dev, &dev_attr_gotgctl); -+ device_remove_file(&dev->dev, &dev_attr_gusbcfg); -+ device_remove_file(&dev->dev, &dev_attr_grxfsiz); -+ device_remove_file(&dev->dev, &dev_attr_gnptxfsiz); -+ device_remove_file(&dev->dev, &dev_attr_gpvndctl); -+ device_remove_file(&dev->dev, &dev_attr_ggpio); -+ device_remove_file(&dev->dev, &dev_attr_guid); -+ device_remove_file(&dev->dev, &dev_attr_gsnpsid); -+ device_remove_file(&dev->dev, &dev_attr_devspeed); -+ device_remove_file(&dev->dev, &dev_attr_enumspeed); -+ device_remove_file(&dev->dev, &dev_attr_hptxfsiz); -+ device_remove_file(&dev->dev, &dev_attr_hprt0); -+ device_remove_file(&dev->dev, &dev_attr_remote_wakeup); -+ device_remove_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn); -+ device_remove_file(&dev->dev, &dev_attr_disconnect_us); -+ device_remove_file(&dev->dev, &dev_attr_regdump); -+ device_remove_file(&dev->dev, &dev_attr_spramdump); -+ device_remove_file(&dev->dev, &dev_attr_hcddump); -+ device_remove_file(&dev->dev, &dev_attr_hcd_frrem); -+ device_remove_file(&dev->dev, &dev_attr_rd_reg_test); -+ device_remove_file(&dev->dev, &dev_attr_wr_reg_test); -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ device_remove_file(&dev->dev, &dev_attr_lpm_response); -+ device_remove_file(&dev->dev, &dev_attr_sleep_status); -+#endif -+} ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_attr.h -@@ -0,0 +1,89 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $ -+ * $Revision: #13 $ -+ * $Date: 2010/06/21 $ -+ * $Change: 1532021 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#if !defined(__DWC_OTG_ATTR_H__) -+#define __DWC_OTG_ATTR_H__ -+ -+/** @file -+ * This file contains the interface to the Linux device attributes. -+ */ -+extern struct device_attribute dev_attr_regoffset; -+extern struct device_attribute dev_attr_regvalue; -+ -+extern struct device_attribute dev_attr_mode; -+extern struct device_attribute dev_attr_hnpcapable; -+extern struct device_attribute dev_attr_srpcapable; -+extern struct device_attribute dev_attr_hnp; -+extern struct device_attribute dev_attr_srp; -+extern struct device_attribute dev_attr_buspower; -+extern struct device_attribute dev_attr_bussuspend; -+extern struct device_attribute dev_attr_mode_ch_tim_en; -+extern struct device_attribute dev_attr_fr_interval; -+extern struct device_attribute dev_attr_busconnected; -+extern struct device_attribute dev_attr_gotgctl; -+extern struct device_attribute dev_attr_gusbcfg; -+extern struct device_attribute dev_attr_grxfsiz; -+extern struct device_attribute dev_attr_gnptxfsiz; -+extern struct device_attribute dev_attr_gpvndctl; -+extern struct device_attribute dev_attr_ggpio; -+extern struct device_attribute dev_attr_guid; -+extern struct device_attribute dev_attr_gsnpsid; -+extern struct device_attribute dev_attr_devspeed; -+extern struct device_attribute dev_attr_enumspeed; -+extern struct device_attribute dev_attr_hptxfsiz; -+extern struct device_attribute dev_attr_hprt0; -+#ifdef CONFIG_USB_DWC_OTG_LPM -+extern struct device_attribute dev_attr_lpm_response; -+extern struct device_attribute devi_attr_sleep_status; -+#endif -+ -+void dwc_otg_attr_create( -+#ifdef LM_INTERFACE -+ struct lm_device *dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *dev -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *dev -+#endif -+ ); -+ -+void dwc_otg_attr_remove( -+#ifdef LM_INTERFACE -+ struct lm_device *dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *dev -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *dev -+#endif -+ ); -+#endif ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_cfi.c -@@ -0,0 +1,1876 @@ -+/* ========================================================================== -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+/** @file -+ * -+ * This file contains the most of the CFI(Core Feature Interface) -+ * implementation for the OTG. -+ */ -+ -+#ifdef DWC_UTE_CFI -+ -+#include "dwc_otg_pcd.h" -+#include "dwc_otg_cfi.h" -+ -+/** This definition should actually migrate to the Portability Library */ -+#define DWC_CONSTANT_CPU_TO_LE16(x) (x) -+ -+extern dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex); -+ -+static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen); -+static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen, -+ struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *ctrl_req); -+static int cfi_set_feature_value(struct dwc_otg_pcd *pcd); -+static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *req); -+static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *req); -+static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *req); -+static int cfi_preproc_reset(struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *req); -+static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep); -+ -+static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if); -+static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue); -+static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue); -+ -+static uint8_t resize_fifos(dwc_otg_core_if_t * core_if); -+ -+/** This is the header of the all features descriptor */ -+static cfi_all_features_header_t all_props_desc_header = { -+ .wVersion = DWC_CONSTANT_CPU_TO_LE16(0x100), -+ .wCoreID = DWC_CONSTANT_CPU_TO_LE16(CFI_CORE_ID_OTG), -+ .wNumFeatures = DWC_CONSTANT_CPU_TO_LE16(9), -+}; -+ -+/** This is an array of statically allocated feature descriptors */ -+static cfi_feature_desc_header_t prop_descs[] = { -+ -+ /* FT_ID_DMA_MODE */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_MODE), -+ .bmAttributes = CFI_FEATURE_ATTR_RW, -+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(1), -+ }, -+ -+ /* FT_ID_DMA_BUFFER_SETUP */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFFER_SETUP), -+ .bmAttributes = CFI_FEATURE_ATTR_RW, -+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), -+ }, -+ -+ /* FT_ID_DMA_BUFF_ALIGN */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFF_ALIGN), -+ .bmAttributes = CFI_FEATURE_ATTR_RW, -+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), -+ }, -+ -+ /* FT_ID_DMA_CONCAT_SETUP */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CONCAT_SETUP), -+ .bmAttributes = CFI_FEATURE_ATTR_RW, -+ //.wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), -+ }, -+ -+ /* FT_ID_DMA_CIRCULAR */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CIRCULAR), -+ .bmAttributes = CFI_FEATURE_ATTR_RW, -+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), -+ }, -+ -+ /* FT_ID_THRESHOLD_SETUP */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_THRESHOLD_SETUP), -+ .bmAttributes = CFI_FEATURE_ATTR_RW, -+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), -+ }, -+ -+ /* FT_ID_DFIFO_DEPTH */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DFIFO_DEPTH), -+ .bmAttributes = CFI_FEATURE_ATTR_RO, -+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), -+ }, -+ -+ /* FT_ID_TX_FIFO_DEPTH */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_TX_FIFO_DEPTH), -+ .bmAttributes = CFI_FEATURE_ATTR_RW, -+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), -+ }, -+ -+ /* FT_ID_RX_FIFO_DEPTH */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_RX_FIFO_DEPTH), -+ .bmAttributes = CFI_FEATURE_ATTR_RW, -+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), -+ } -+}; -+ -+/** The table of feature names */ -+cfi_string_t prop_name_table[] = { -+ {FT_ID_DMA_MODE, "dma_mode"}, -+ {FT_ID_DMA_BUFFER_SETUP, "buffer_setup"}, -+ {FT_ID_DMA_BUFF_ALIGN, "buffer_align"}, -+ {FT_ID_DMA_CONCAT_SETUP, "concat_setup"}, -+ {FT_ID_DMA_CIRCULAR, "buffer_circular"}, -+ {FT_ID_THRESHOLD_SETUP, "threshold_setup"}, -+ {FT_ID_DFIFO_DEPTH, "dfifo_depth"}, -+ {FT_ID_TX_FIFO_DEPTH, "txfifo_depth"}, -+ {FT_ID_RX_FIFO_DEPTH, "rxfifo_depth"}, -+ {} -+}; -+ -+/************************************************************************/ -+ -+/** -+ * Returns the name of the feature by its ID -+ * or NULL if no featute ID matches. -+ * -+ */ -+const uint8_t *get_prop_name(uint16_t prop_id, int *len) -+{ -+ cfi_string_t *pstr; -+ *len = 0; -+ -+ for (pstr = prop_name_table; pstr && pstr->s; pstr++) { -+ if (pstr->id == prop_id) { -+ *len = DWC_STRLEN(pstr->s); -+ return pstr->s; -+ } -+ } -+ return NULL; -+} -+ -+/** -+ * This function handles all CFI specific control requests. -+ * -+ * Return a negative value to stall the DCE. -+ */ -+int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl) -+{ -+ int retval = 0; -+ dwc_otg_pcd_ep_t *ep = NULL; -+ cfiobject_t *cfi = pcd->cfi; -+ struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd); -+ uint16_t wLen = DWC_LE16_TO_CPU(&ctrl->wLength); -+ uint16_t wValue = DWC_LE16_TO_CPU(&ctrl->wValue); -+ uint16_t wIndex = DWC_LE16_TO_CPU(&ctrl->wIndex); -+ uint32_t regaddr = 0; -+ uint32_t regval = 0; -+ -+ /* Save this Control Request in the CFI object. -+ * The data field will be assigned in the data stage completion CB function. -+ */ -+ cfi->ctrl_req = *ctrl; -+ cfi->ctrl_req.data = NULL; -+ -+ cfi->need_gadget_att = 0; -+ cfi->need_status_in_complete = 0; -+ -+ switch (ctrl->bRequest) { -+ case VEN_CORE_GET_FEATURES: -+ retval = cfi_core_features_buf(cfi->buf_in.buf, CFI_IN_BUF_LEN); -+ if (retval >= 0) { -+ //dump_msg(cfi->buf_in.buf, retval); -+ ep = &pcd->ep0; -+ -+ retval = min((uint16_t) retval, wLen); -+ /* Transfer this buffer to the host through the EP0-IN EP */ -+ ep->dwc_ep.dma_addr = cfi->buf_in.addr; -+ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; -+ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; -+ ep->dwc_ep.xfer_len = retval; -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; -+ -+ pcd->ep0_pending = 1; -+ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); -+ } -+ retval = 0; -+ break; -+ -+ case VEN_CORE_GET_FEATURE: -+ CFI_INFO("VEN_CORE_GET_FEATURE\n"); -+ retval = cfi_get_feature_value(cfi->buf_in.buf, CFI_IN_BUF_LEN, -+ pcd, ctrl); -+ if (retval >= 0) { -+ ep = &pcd->ep0; -+ -+ retval = min((uint16_t) retval, wLen); -+ /* Transfer this buffer to the host through the EP0-IN EP */ -+ ep->dwc_ep.dma_addr = cfi->buf_in.addr; -+ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; -+ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; -+ ep->dwc_ep.xfer_len = retval; -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; -+ -+ pcd->ep0_pending = 1; -+ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); -+ } -+ CFI_INFO("VEN_CORE_GET_FEATURE=%d\n", retval); -+ dump_msg(cfi->buf_in.buf, retval); -+ break; -+ -+ case VEN_CORE_SET_FEATURE: -+ CFI_INFO("VEN_CORE_SET_FEATURE\n"); -+ /* Set up an XFER to get the data stage of the control request, -+ * which is the new value of the feature to be modified. -+ */ -+ ep = &pcd->ep0; -+ ep->dwc_ep.is_in = 0; -+ ep->dwc_ep.dma_addr = cfi->buf_out.addr; -+ ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf; -+ ep->dwc_ep.xfer_buff = cfi->buf_out.buf; -+ ep->dwc_ep.xfer_len = wLen; -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; -+ -+ pcd->ep0_pending = 1; -+ /* Read the control write's data stage */ -+ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); -+ retval = 0; -+ break; -+ -+ case VEN_CORE_RESET_FEATURES: -+ CFI_INFO("VEN_CORE_RESET_FEATURES\n"); -+ cfi->need_gadget_att = 1; -+ cfi->need_status_in_complete = 1; -+ retval = cfi_preproc_reset(pcd, ctrl); -+ CFI_INFO("VEN_CORE_RESET_FEATURES = (%d)\n", retval); -+ break; -+ -+ case VEN_CORE_ACTIVATE_FEATURES: -+ CFI_INFO("VEN_CORE_ACTIVATE_FEATURES\n"); -+ break; -+ -+ case VEN_CORE_READ_REGISTER: -+ CFI_INFO("VEN_CORE_READ_REGISTER\n"); -+ /* wValue optionally contains the HI WORD of the register offset and -+ * wIndex contains the LOW WORD of the register offset -+ */ -+ if (wValue == 0) { -+ /* @TODO - MAS - fix the access to the base field */ -+ regaddr = 0; -+ //regaddr = (uint32_t) pcd->otg_dev->os_dep.base; -+ //GET_CORE_IF(pcd)->co -+ regaddr |= wIndex; -+ } else { -+ regaddr = (wValue << 16) | wIndex; -+ } -+ -+ /* Read a 32-bit value of the memory at the regaddr */ -+ regval = DWC_READ_REG32((uint32_t *) regaddr); -+ -+ ep = &pcd->ep0; -+ dwc_memcpy(cfi->buf_in.buf, ®val, sizeof(uint32_t)); -+ ep->dwc_ep.is_in = 1; -+ ep->dwc_ep.dma_addr = cfi->buf_in.addr; -+ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; -+ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; -+ ep->dwc_ep.xfer_len = wLen; -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; -+ -+ pcd->ep0_pending = 1; -+ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); -+ cfi->need_gadget_att = 0; -+ retval = 0; -+ break; -+ -+ case VEN_CORE_WRITE_REGISTER: -+ CFI_INFO("VEN_CORE_WRITE_REGISTER\n"); -+ /* Set up an XFER to get the data stage of the control request, -+ * which is the new value of the register to be modified. -+ */ -+ ep = &pcd->ep0; -+ ep->dwc_ep.is_in = 0; -+ ep->dwc_ep.dma_addr = cfi->buf_out.addr; -+ ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf; -+ ep->dwc_ep.xfer_buff = cfi->buf_out.buf; -+ ep->dwc_ep.xfer_len = wLen; -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; -+ -+ pcd->ep0_pending = 1; -+ /* Read the control write's data stage */ -+ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); -+ retval = 0; -+ break; -+ -+ default: -+ retval = -DWC_E_NOT_SUPPORTED; -+ break; -+ } -+ -+ return retval; -+} -+ -+/** -+ * This function prepares the core features descriptors and copies its -+ * raw representation into the buffer . -+ * -+ * The buffer structure is as follows: -+ * all_features_header (8 bytes) -+ * features_#1 (8 bytes + feature name string length) -+ * features_#2 (8 bytes + feature name string length) -+ * ..... -+ * features_#n - where n=the total count of feature descriptors -+ */ -+static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen) -+{ -+ cfi_feature_desc_header_t *prop_hdr = prop_descs; -+ cfi_feature_desc_header_t *prop; -+ cfi_all_features_header_t *all_props_hdr = &all_props_desc_header; -+ cfi_all_features_header_t *tmp; -+ uint8_t *tmpbuf = buf; -+ const uint8_t *pname = NULL; -+ int i, j, namelen = 0, totlen; -+ -+ /* Prepare and copy the core features into the buffer */ -+ CFI_INFO("%s:\n", __func__); -+ -+ tmp = (cfi_all_features_header_t *) tmpbuf; -+ *tmp = *all_props_hdr; -+ tmpbuf += CFI_ALL_FEATURES_HDR_LEN; -+ -+ j = sizeof(prop_descs) / sizeof(cfi_all_features_header_t); -+ for (i = 0; i < j; i++, prop_hdr++) { -+ pname = get_prop_name(prop_hdr->wFeatureID, &namelen); -+ prop = (cfi_feature_desc_header_t *) tmpbuf; -+ *prop = *prop_hdr; -+ -+ prop->bNameLen = namelen; -+ prop->wLength = -+ DWC_CONSTANT_CPU_TO_LE16(CFI_FEATURE_DESC_HDR_LEN + -+ namelen); -+ -+ tmpbuf += CFI_FEATURE_DESC_HDR_LEN; -+ dwc_memcpy(tmpbuf, pname, namelen); -+ tmpbuf += namelen; -+ } -+ -+ totlen = tmpbuf - buf; -+ -+ if (totlen > 0) { -+ tmp = (cfi_all_features_header_t *) buf; -+ tmp->wTotalLen = DWC_CONSTANT_CPU_TO_LE16(totlen); -+ } -+ -+ return totlen; -+} -+ -+/** -+ * This function releases all the dynamic memory in the CFI object. -+ */ -+static void cfi_release(cfiobject_t * cfiobj) -+{ -+ cfi_ep_t *cfiep; -+ dwc_list_link_t *tmp; -+ -+ CFI_INFO("%s\n", __func__); -+ -+ if (cfiobj->buf_in.buf) { -+ DWC_DMA_FREE(CFI_IN_BUF_LEN, cfiobj->buf_in.buf, -+ cfiobj->buf_in.addr); -+ cfiobj->buf_in.buf = NULL; -+ } -+ -+ if (cfiobj->buf_out.buf) { -+ DWC_DMA_FREE(CFI_OUT_BUF_LEN, cfiobj->buf_out.buf, -+ cfiobj->buf_out.addr); -+ cfiobj->buf_out.buf = NULL; -+ } -+ -+ /* Free the Buffer Setup values for each EP */ -+ //list_for_each_entry(cfiep, &cfiobj->active_eps, lh) { -+ DWC_LIST_FOREACH(tmp, &cfiobj->active_eps) { -+ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); -+ cfi_free_ep_bs_dyn_data(cfiep); -+ } -+} -+ -+/** -+ * This function frees the dynamically allocated EP buffer setup data. -+ */ -+static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep) -+{ -+ if (cfiep->bm_sg) { -+ DWC_FREE(cfiep->bm_sg); -+ cfiep->bm_sg = NULL; -+ } -+ -+ if (cfiep->bm_align) { -+ DWC_FREE(cfiep->bm_align); -+ cfiep->bm_align = NULL; -+ } -+ -+ if (cfiep->bm_concat) { -+ if (NULL != cfiep->bm_concat->wTxBytes) { -+ DWC_FREE(cfiep->bm_concat->wTxBytes); -+ cfiep->bm_concat->wTxBytes = NULL; -+ } -+ DWC_FREE(cfiep->bm_concat); -+ cfiep->bm_concat = NULL; -+ } -+} -+ -+/** -+ * This function initializes the default values of the features -+ * for a specific endpoint and should be called only once when -+ * the EP is enabled first time. -+ */ -+static int cfi_ep_init_defaults(struct dwc_otg_pcd *pcd, cfi_ep_t * cfiep) -+{ -+ int retval = 0; -+ -+ cfiep->bm_sg = DWC_ALLOC(sizeof(ddma_sg_buffer_setup_t)); -+ if (NULL == cfiep->bm_sg) { -+ CFI_INFO("Failed to allocate memory for SG feature value\n"); -+ return -DWC_E_NO_MEMORY; -+ } -+ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); -+ -+ /* For the Concatenation feature's default value we do not allocate -+ * memory for the wTxBytes field - it will be done in the set_feature_value -+ * request handler. -+ */ -+ cfiep->bm_concat = DWC_ALLOC(sizeof(ddma_concat_buffer_setup_t)); -+ if (NULL == cfiep->bm_concat) { -+ CFI_INFO -+ ("Failed to allocate memory for CONCATENATION feature value\n"); -+ DWC_FREE(cfiep->bm_sg); -+ return -DWC_E_NO_MEMORY; -+ } -+ dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t)); -+ -+ cfiep->bm_align = DWC_ALLOC(sizeof(ddma_align_buffer_setup_t)); -+ if (NULL == cfiep->bm_align) { -+ CFI_INFO -+ ("Failed to allocate memory for Alignment feature value\n"); -+ DWC_FREE(cfiep->bm_sg); -+ DWC_FREE(cfiep->bm_concat); -+ return -DWC_E_NO_MEMORY; -+ } -+ dwc_memset(cfiep->bm_align, 0, sizeof(ddma_align_buffer_setup_t)); -+ -+ return retval; -+} -+ -+/** -+ * The callback function that notifies the CFI on the activation of -+ * an endpoint in the PCD. The following steps are done in this function: -+ * -+ * Create a dynamically allocated cfi_ep_t object (a CFI wrapper to the PCD's -+ * active endpoint) -+ * Create MAX_DMA_DESCS_PER_EP count DMA Descriptors for the EP -+ * Set the Buffer Mode to standard -+ * Initialize the default values for all EP modes (SG, Circular, Concat, Align) -+ * Add the cfi_ep_t object to the list of active endpoints in the CFI object -+ */ -+static int cfi_ep_enable(struct cfiobject *cfi, struct dwc_otg_pcd *pcd, -+ struct dwc_otg_pcd_ep *ep) -+{ -+ cfi_ep_t *cfiep; -+ int retval = -DWC_E_NOT_SUPPORTED; -+ -+ CFI_INFO("%s: epname=%s; epnum=0x%02x\n", __func__, -+ "EP_" /*ep->ep.name */ , ep->desc->bEndpointAddress); -+ /* MAS - Check whether this endpoint already is in the list */ -+ cfiep = get_cfi_ep_by_pcd_ep(cfi, ep); -+ -+ if (NULL == cfiep) { -+ /* Allocate a cfi_ep_t object */ -+ cfiep = DWC_ALLOC(sizeof(cfi_ep_t)); -+ if (NULL == cfiep) { -+ CFI_INFO -+ ("Unable to allocate memory for in function %s\n", -+ __func__); -+ return -DWC_E_NO_MEMORY; -+ } -+ dwc_memset(cfiep, 0, sizeof(cfi_ep_t)); -+ -+ /* Save the dwc_otg_pcd_ep pointer in the cfiep object */ -+ cfiep->ep = ep; -+ -+ /* Allocate the DMA Descriptors chain of MAX_DMA_DESCS_PER_EP count */ -+ ep->dwc_ep.descs = -+ DWC_DMA_ALLOC(MAX_DMA_DESCS_PER_EP * -+ sizeof(dwc_otg_dma_desc_t), -+ &ep->dwc_ep.descs_dma_addr); -+ -+ if (NULL == ep->dwc_ep.descs) { -+ DWC_FREE(cfiep); -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ DWC_LIST_INIT(&cfiep->lh); -+ -+ /* Set the buffer mode to BM_STANDARD. It will be modified -+ * when building descriptors for a specific buffer mode */ -+ ep->dwc_ep.buff_mode = BM_STANDARD; -+ -+ /* Create and initialize the default values for this EP's Buffer modes */ -+ if ((retval = cfi_ep_init_defaults(pcd, cfiep)) < 0) -+ return retval; -+ -+ /* Add the cfi_ep_t object to the CFI object's list of active endpoints */ -+ DWC_LIST_INSERT_TAIL(&cfi->active_eps, &cfiep->lh); -+ retval = 0; -+ } else { /* The sought EP already is in the list */ -+ CFI_INFO("%s: The sought EP already is in the list\n", -+ __func__); -+ } -+ -+ return retval; -+} -+ -+/** -+ * This function is called when the data stage of a 3-stage Control Write request -+ * is complete. -+ * -+ */ -+static int cfi_ctrl_write_complete(struct cfiobject *cfi, -+ struct dwc_otg_pcd *pcd) -+{ -+ uint32_t addr, reg_value; -+ uint16_t wIndex, wValue; -+ uint8_t bRequest; -+ uint8_t *buf = cfi->buf_out.buf; -+ //struct usb_ctrlrequest *ctrl_req = &cfi->ctrl_req_saved; -+ struct cfi_usb_ctrlrequest *ctrl_req = &cfi->ctrl_req; -+ int retval = -DWC_E_NOT_SUPPORTED; -+ -+ CFI_INFO("%s\n", __func__); -+ -+ bRequest = ctrl_req->bRequest; -+ wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex); -+ wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue); -+ -+ /* -+ * Save the pointer to the data stage in the ctrl_req's field. -+ * The request should be already saved in the command stage by now. -+ */ -+ ctrl_req->data = cfi->buf_out.buf; -+ cfi->need_status_in_complete = 0; -+ cfi->need_gadget_att = 0; -+ -+ switch (bRequest) { -+ case VEN_CORE_WRITE_REGISTER: -+ /* The buffer contains raw data of the new value for the register */ -+ reg_value = *((uint32_t *) buf); -+ if (wValue == 0) { -+ addr = 0; -+ //addr = (uint32_t) pcd->otg_dev->os_dep.base; -+ addr += wIndex; -+ } else { -+ addr = (wValue << 16) | wIndex; -+ } -+ -+ //writel(reg_value, addr); -+ -+ retval = 0; -+ cfi->need_status_in_complete = 1; -+ break; -+ -+ case VEN_CORE_SET_FEATURE: -+ /* The buffer contains raw data of the new value of the feature */ -+ retval = cfi_set_feature_value(pcd); -+ if (retval < 0) -+ return retval; -+ -+ cfi->need_status_in_complete = 1; -+ break; -+ -+ default: -+ break; -+ } -+ -+ return retval; -+} -+ -+/** -+ * This function builds the DMA descriptors for the SG buffer mode. -+ */ -+static void cfi_build_sg_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, -+ dwc_otg_pcd_request_t * req) -+{ -+ struct dwc_otg_pcd_ep *ep = cfiep->ep; -+ ddma_sg_buffer_setup_t *sgval = cfiep->bm_sg; -+ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; -+ struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs; -+ dma_addr_t buff_addr = req->dma; -+ int i; -+ uint32_t txsize, off; -+ -+ txsize = sgval->wSize; -+ off = sgval->bOffset; -+ -+// CFI_INFO("%s: %s TXSIZE=0x%08x; OFFSET=0x%08x\n", -+// __func__, cfiep->ep->ep.name, txsize, off); -+ -+ for (i = 0; i < sgval->bCount; i++) { -+ desc->status.b.bs = BS_HOST_BUSY; -+ desc->buf = buff_addr; -+ desc->status.b.l = 0; -+ desc->status.b.ioc = 0; -+ desc->status.b.sp = 0; -+ desc->status.b.bytes = txsize; -+ desc->status.b.bs = BS_HOST_READY; -+ -+ /* Set the next address of the buffer */ -+ buff_addr += txsize + off; -+ desc_last = desc; -+ desc++; -+ } -+ -+ /* Set the last, ioc and sp bits on the Last DMA Descriptor */ -+ desc_last->status.b.l = 1; -+ desc_last->status.b.ioc = 1; -+ desc_last->status.b.sp = ep->dwc_ep.sent_zlp; -+ /* Save the last DMA descriptor pointer */ -+ cfiep->dma_desc_last = desc_last; -+ cfiep->desc_count = sgval->bCount; -+} -+ -+/** -+ * This function builds the DMA descriptors for the Concatenation buffer mode. -+ */ -+static void cfi_build_concat_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, -+ dwc_otg_pcd_request_t * req) -+{ -+ struct dwc_otg_pcd_ep *ep = cfiep->ep; -+ ddma_concat_buffer_setup_t *concatval = cfiep->bm_concat; -+ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; -+ struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs; -+ dma_addr_t buff_addr = req->dma; -+ int i; -+ uint16_t *txsize; -+ -+ txsize = concatval->wTxBytes; -+ -+ for (i = 0; i < concatval->hdr.bDescCount; i++) { -+ desc->buf = buff_addr; -+ desc->status.b.bs = BS_HOST_BUSY; -+ desc->status.b.l = 0; -+ desc->status.b.ioc = 0; -+ desc->status.b.sp = 0; -+ desc->status.b.bytes = *txsize; -+ desc->status.b.bs = BS_HOST_READY; -+ -+ txsize++; -+ /* Set the next address of the buffer */ -+ buff_addr += UGETW(ep->desc->wMaxPacketSize); -+ desc_last = desc; -+ desc++; -+ } -+ -+ /* Set the last, ioc and sp bits on the Last DMA Descriptor */ -+ desc_last->status.b.l = 1; -+ desc_last->status.b.ioc = 1; -+ desc_last->status.b.sp = ep->dwc_ep.sent_zlp; -+ cfiep->dma_desc_last = desc_last; -+ cfiep->desc_count = concatval->hdr.bDescCount; -+} -+ -+/** -+ * This function builds the DMA descriptors for the Circular buffer mode -+ */ -+static void cfi_build_circ_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, -+ dwc_otg_pcd_request_t * req) -+{ -+ /* @todo: MAS - add implementation when this feature needs to be tested */ -+} -+ -+/** -+ * This function builds the DMA descriptors for the Alignment buffer mode -+ */ -+static void cfi_build_align_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, -+ dwc_otg_pcd_request_t * req) -+{ -+ struct dwc_otg_pcd_ep *ep = cfiep->ep; -+ ddma_align_buffer_setup_t *alignval = cfiep->bm_align; -+ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; -+ dma_addr_t buff_addr = req->dma; -+ -+ desc->status.b.bs = BS_HOST_BUSY; -+ desc->status.b.l = 1; -+ desc->status.b.ioc = 1; -+ desc->status.b.sp = ep->dwc_ep.sent_zlp; -+ desc->status.b.bytes = req->length; -+ /* Adjust the buffer alignment */ -+ desc->buf = (buff_addr + alignval->bAlign); -+ desc->status.b.bs = BS_HOST_READY; -+ cfiep->dma_desc_last = desc; -+ cfiep->desc_count = 1; -+} -+ -+/** -+ * This function builds the DMA descriptors chain for different modes of the -+ * buffer setup of an endpoint. -+ */ -+static void cfi_build_descriptors(struct cfiobject *cfi, -+ struct dwc_otg_pcd *pcd, -+ struct dwc_otg_pcd_ep *ep, -+ dwc_otg_pcd_request_t * req) -+{ -+ cfi_ep_t *cfiep; -+ -+ /* Get the cfiep by the dwc_otg_pcd_ep */ -+ cfiep = get_cfi_ep_by_pcd_ep(cfi, ep); -+ if (NULL == cfiep) { -+ CFI_INFO("%s: Unable to find a matching active endpoint\n", -+ __func__); -+ return; -+ } -+ -+ cfiep->xfer_len = req->length; -+ -+ /* Iterate through all the DMA descriptors */ -+ switch (cfiep->ep->dwc_ep.buff_mode) { -+ case BM_SG: -+ cfi_build_sg_descs(cfi, cfiep, req); -+ break; -+ -+ case BM_CONCAT: -+ cfi_build_concat_descs(cfi, cfiep, req); -+ break; -+ -+ case BM_CIRCULAR: -+ cfi_build_circ_descs(cfi, cfiep, req); -+ break; -+ -+ case BM_ALIGN: -+ cfi_build_align_descs(cfi, cfiep, req); -+ break; -+ -+ default: -+ break; -+ } -+} -+ -+/** -+ * Allocate DMA buffer for different Buffer modes. -+ */ -+static void *cfi_ep_alloc_buf(struct cfiobject *cfi, struct dwc_otg_pcd *pcd, -+ struct dwc_otg_pcd_ep *ep, dma_addr_t * dma, -+ unsigned size, gfp_t flags) -+{ -+ return DWC_DMA_ALLOC(size, dma); -+} -+ -+/** -+ * This function initializes the CFI object. -+ */ -+int init_cfi(cfiobject_t * cfiobj) -+{ -+ CFI_INFO("%s\n", __func__); -+ -+ /* Allocate a buffer for IN XFERs */ -+ cfiobj->buf_in.buf = -+ DWC_DMA_ALLOC(CFI_IN_BUF_LEN, &cfiobj->buf_in.addr); -+ if (NULL == cfiobj->buf_in.buf) { -+ CFI_INFO("Unable to allocate buffer for INs\n"); -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ /* Allocate a buffer for OUT XFERs */ -+ cfiobj->buf_out.buf = -+ DWC_DMA_ALLOC(CFI_OUT_BUF_LEN, &cfiobj->buf_out.addr); -+ if (NULL == cfiobj->buf_out.buf) { -+ CFI_INFO("Unable to allocate buffer for OUT\n"); -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ /* Initialize the callback function pointers */ -+ cfiobj->ops.release = cfi_release; -+ cfiobj->ops.ep_enable = cfi_ep_enable; -+ cfiobj->ops.ctrl_write_complete = cfi_ctrl_write_complete; -+ cfiobj->ops.build_descriptors = cfi_build_descriptors; -+ cfiobj->ops.ep_alloc_buf = cfi_ep_alloc_buf; -+ -+ /* Initialize the list of active endpoints in the CFI object */ -+ DWC_LIST_INIT(&cfiobj->active_eps); -+ -+ return 0; -+} -+ -+/** -+ * This function reads the required feature's current value into the buffer -+ * -+ * @retval: Returns negative as error, or the data length of the feature -+ */ -+static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen, -+ struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *ctrl_req) -+{ -+ int retval = -DWC_E_NOT_SUPPORTED; -+ struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd); -+ uint16_t dfifo, rxfifo, txfifo; -+ -+ switch (ctrl_req->wIndex) { -+ /* Whether the DDMA is enabled or not */ -+ case FT_ID_DMA_MODE: -+ *buf = (coreif->dma_enable && coreif->dma_desc_enable) ? 1 : 0; -+ retval = 1; -+ break; -+ -+ case FT_ID_DMA_BUFFER_SETUP: -+ retval = cfi_ep_get_sg_val(buf, pcd, ctrl_req); -+ break; -+ -+ case FT_ID_DMA_BUFF_ALIGN: -+ retval = cfi_ep_get_align_val(buf, pcd, ctrl_req); -+ break; -+ -+ case FT_ID_DMA_CONCAT_SETUP: -+ retval = cfi_ep_get_concat_val(buf, pcd, ctrl_req); -+ break; -+ -+ case FT_ID_DMA_CIRCULAR: -+ CFI_INFO("GetFeature value (FT_ID_DMA_CIRCULAR)\n"); -+ break; -+ -+ case FT_ID_THRESHOLD_SETUP: -+ CFI_INFO("GetFeature value (FT_ID_THRESHOLD_SETUP)\n"); -+ break; -+ -+ case FT_ID_DFIFO_DEPTH: -+ dfifo = get_dfifo_size(coreif); -+ *((uint16_t *) buf) = dfifo; -+ retval = sizeof(uint16_t); -+ break; -+ -+ case FT_ID_TX_FIFO_DEPTH: -+ retval = get_txfifo_size(pcd, ctrl_req->wValue); -+ if (retval >= 0) { -+ txfifo = retval; -+ *((uint16_t *) buf) = txfifo; -+ retval = sizeof(uint16_t); -+ } -+ break; -+ -+ case FT_ID_RX_FIFO_DEPTH: -+ retval = get_rxfifo_size(coreif, ctrl_req->wValue); -+ if (retval >= 0) { -+ rxfifo = retval; -+ *((uint16_t *) buf) = rxfifo; -+ retval = sizeof(uint16_t); -+ } -+ break; -+ } -+ -+ return retval; -+} -+ -+/** -+ * This function resets the SG for the specified EP to its default value -+ */ -+static int cfi_reset_sg_val(cfi_ep_t * cfiep) -+{ -+ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); -+ return 0; -+} -+ -+/** -+ * This function resets the Alignment for the specified EP to its default value -+ */ -+static int cfi_reset_align_val(cfi_ep_t * cfiep) -+{ -+ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); -+ return 0; -+} -+ -+/** -+ * This function resets the Concatenation for the specified EP to its default value -+ * This function will also set the value of the wTxBytes field to NULL after -+ * freeing the memory previously allocated for this field. -+ */ -+static int cfi_reset_concat_val(cfi_ep_t * cfiep) -+{ -+ /* First we need to free the wTxBytes field */ -+ if (cfiep->bm_concat->wTxBytes) { -+ DWC_FREE(cfiep->bm_concat->wTxBytes); -+ cfiep->bm_concat->wTxBytes = NULL; -+ } -+ -+ dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t)); -+ return 0; -+} -+ -+/** -+ * This function resets all the buffer setups of the specified endpoint -+ */ -+static int cfi_ep_reset_all_setup_vals(cfi_ep_t * cfiep) -+{ -+ cfi_reset_sg_val(cfiep); -+ cfi_reset_align_val(cfiep); -+ cfi_reset_concat_val(cfiep); -+ return 0; -+} -+ -+static int cfi_handle_reset_fifo_val(struct dwc_otg_pcd *pcd, uint8_t ep_addr, -+ uint8_t rx_rst, uint8_t tx_rst) -+{ -+ int retval = -DWC_E_INVALID; -+ uint16_t tx_siz[15]; -+ uint16_t rx_siz = 0; -+ dwc_otg_pcd_ep_t *ep = NULL; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; -+ -+ if (rx_rst) { -+ rx_siz = params->dev_rx_fifo_size; -+ params->dev_rx_fifo_size = GET_CORE_IF(pcd)->init_rxfsiz; -+ } -+ -+ if (tx_rst) { -+ if (ep_addr == 0) { -+ int i; -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ tx_siz[i] = -+ core_if->core_params->dev_tx_fifo_size[i]; -+ core_if->core_params->dev_tx_fifo_size[i] = -+ core_if->init_txfsiz[i]; -+ } -+ } else { -+ -+ ep = get_ep_by_addr(pcd, ep_addr); -+ -+ if (NULL == ep) { -+ CFI_INFO -+ ("%s: Unable to get the endpoint addr=0x%02x\n", -+ __func__, ep_addr); -+ return -DWC_E_INVALID; -+ } -+ -+ tx_siz[0] = -+ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - -+ 1]; -+ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = -+ GET_CORE_IF(pcd)->init_txfsiz[ep-> -+ dwc_ep.tx_fifo_num - -+ 1]; -+ } -+ } -+ -+ if (resize_fifos(GET_CORE_IF(pcd))) { -+ retval = 0; -+ } else { -+ CFI_INFO -+ ("%s: Error resetting the feature Reset All(FIFO size)\n", -+ __func__); -+ if (rx_rst) { -+ params->dev_rx_fifo_size = rx_siz; -+ } -+ -+ if (tx_rst) { -+ if (ep_addr == 0) { -+ int i; -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; -+ i++) { -+ core_if-> -+ core_params->dev_tx_fifo_size[i] = -+ tx_siz[i]; -+ } -+ } else { -+ params->dev_tx_fifo_size[ep-> -+ dwc_ep.tx_fifo_num - -+ 1] = tx_siz[0]; -+ } -+ } -+ retval = -DWC_E_INVALID; -+ } -+ return retval; -+} -+ -+static int cfi_handle_reset_all(struct dwc_otg_pcd *pcd, uint8_t addr) -+{ -+ int retval = 0; -+ cfi_ep_t *cfiep; -+ cfiobject_t *cfi = pcd->cfi; -+ dwc_list_link_t *tmp; -+ -+ retval = cfi_handle_reset_fifo_val(pcd, addr, 1, 1); -+ if (retval < 0) { -+ return retval; -+ } -+ -+ /* If the EP address is known then reset the features for only that EP */ -+ if (addr) { -+ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ if (NULL == cfiep) { -+ CFI_INFO("%s: Error getting the EP address 0x%02x\n", -+ __func__, addr); -+ return -DWC_E_INVALID; -+ } -+ retval = cfi_ep_reset_all_setup_vals(cfiep); -+ cfiep->ep->dwc_ep.buff_mode = BM_STANDARD; -+ } -+ /* Otherwise (wValue == 0), reset all features of all EP's */ -+ else { -+ /* Traverse all the active EP's and reset the feature(s) value(s) */ -+ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { -+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { -+ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); -+ retval = cfi_ep_reset_all_setup_vals(cfiep); -+ cfiep->ep->dwc_ep.buff_mode = BM_STANDARD; -+ if (retval < 0) { -+ CFI_INFO -+ ("%s: Error resetting the feature Reset All\n", -+ __func__); -+ return retval; -+ } -+ } -+ } -+ return retval; -+} -+ -+static int cfi_handle_reset_dma_buff_setup(struct dwc_otg_pcd *pcd, -+ uint8_t addr) -+{ -+ int retval = 0; -+ cfi_ep_t *cfiep; -+ cfiobject_t *cfi = pcd->cfi; -+ dwc_list_link_t *tmp; -+ -+ /* If the EP address is known then reset the features for only that EP */ -+ if (addr) { -+ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ if (NULL == cfiep) { -+ CFI_INFO("%s: Error getting the EP address 0x%02x\n", -+ __func__, addr); -+ return -DWC_E_INVALID; -+ } -+ retval = cfi_reset_sg_val(cfiep); -+ } -+ /* Otherwise (wValue == 0), reset all features of all EP's */ -+ else { -+ /* Traverse all the active EP's and reset the feature(s) value(s) */ -+ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { -+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { -+ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); -+ retval = cfi_reset_sg_val(cfiep); -+ if (retval < 0) { -+ CFI_INFO -+ ("%s: Error resetting the feature Buffer Setup\n", -+ __func__); -+ return retval; -+ } -+ } -+ } -+ return retval; -+} -+ -+static int cfi_handle_reset_concat_val(struct dwc_otg_pcd *pcd, uint8_t addr) -+{ -+ int retval = 0; -+ cfi_ep_t *cfiep; -+ cfiobject_t *cfi = pcd->cfi; -+ dwc_list_link_t *tmp; -+ -+ /* If the EP address is known then reset the features for only that EP */ -+ if (addr) { -+ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ if (NULL == cfiep) { -+ CFI_INFO("%s: Error getting the EP address 0x%02x\n", -+ __func__, addr); -+ return -DWC_E_INVALID; -+ } -+ retval = cfi_reset_concat_val(cfiep); -+ } -+ /* Otherwise (wValue == 0), reset all features of all EP's */ -+ else { -+ /* Traverse all the active EP's and reset the feature(s) value(s) */ -+ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { -+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { -+ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); -+ retval = cfi_reset_concat_val(cfiep); -+ if (retval < 0) { -+ CFI_INFO -+ ("%s: Error resetting the feature Concatenation Value\n", -+ __func__); -+ return retval; -+ } -+ } -+ } -+ return retval; -+} -+ -+static int cfi_handle_reset_align_val(struct dwc_otg_pcd *pcd, uint8_t addr) -+{ -+ int retval = 0; -+ cfi_ep_t *cfiep; -+ cfiobject_t *cfi = pcd->cfi; -+ dwc_list_link_t *tmp; -+ -+ /* If the EP address is known then reset the features for only that EP */ -+ if (addr) { -+ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ if (NULL == cfiep) { -+ CFI_INFO("%s: Error getting the EP address 0x%02x\n", -+ __func__, addr); -+ return -DWC_E_INVALID; -+ } -+ retval = cfi_reset_align_val(cfiep); -+ } -+ /* Otherwise (wValue == 0), reset all features of all EP's */ -+ else { -+ /* Traverse all the active EP's and reset the feature(s) value(s) */ -+ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { -+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { -+ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); -+ retval = cfi_reset_align_val(cfiep); -+ if (retval < 0) { -+ CFI_INFO -+ ("%s: Error resetting the feature Aliignment Value\n", -+ __func__); -+ return retval; -+ } -+ } -+ } -+ return retval; -+ -+} -+ -+static int cfi_preproc_reset(struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *req) -+{ -+ int retval = 0; -+ -+ switch (req->wIndex) { -+ case 0: -+ /* Reset all features */ -+ retval = cfi_handle_reset_all(pcd, req->wValue & 0xff); -+ break; -+ -+ case FT_ID_DMA_BUFFER_SETUP: -+ /* Reset the SG buffer setup */ -+ retval = -+ cfi_handle_reset_dma_buff_setup(pcd, req->wValue & 0xff); -+ break; -+ -+ case FT_ID_DMA_CONCAT_SETUP: -+ /* Reset the Concatenation buffer setup */ -+ retval = cfi_handle_reset_concat_val(pcd, req->wValue & 0xff); -+ break; -+ -+ case FT_ID_DMA_BUFF_ALIGN: -+ /* Reset the Alignment buffer setup */ -+ retval = cfi_handle_reset_align_val(pcd, req->wValue & 0xff); -+ break; -+ -+ case FT_ID_TX_FIFO_DEPTH: -+ retval = -+ cfi_handle_reset_fifo_val(pcd, req->wValue & 0xff, 0, 1); -+ pcd->cfi->need_gadget_att = 0; -+ break; -+ -+ case FT_ID_RX_FIFO_DEPTH: -+ retval = cfi_handle_reset_fifo_val(pcd, 0, 1, 0); -+ pcd->cfi->need_gadget_att = 0; -+ break; -+ default: -+ break; -+ } -+ return retval; -+} -+ -+/** -+ * This function sets a new value for the SG buffer setup. -+ */ -+static int cfi_ep_set_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd) -+{ -+ uint8_t inaddr, outaddr; -+ cfi_ep_t *epin, *epout; -+ ddma_sg_buffer_setup_t *psgval; -+ uint32_t desccount, size; -+ -+ CFI_INFO("%s\n", __func__); -+ -+ psgval = (ddma_sg_buffer_setup_t *) buf; -+ desccount = (uint32_t) psgval->bCount; -+ size = (uint32_t) psgval->wSize; -+ -+ /* Check the DMA descriptor count */ -+ if ((desccount > MAX_DMA_DESCS_PER_EP) || (desccount == 0)) { -+ CFI_INFO -+ ("%s: The count of DMA Descriptors should be between 1 and %d\n", -+ __func__, MAX_DMA_DESCS_PER_EP); -+ return -DWC_E_INVALID; -+ } -+ -+ /* Check the DMA descriptor count */ -+ -+ if (size == 0) { -+ -+ CFI_INFO("%s: The transfer size should be at least 1 byte\n", -+ __func__); -+ -+ return -DWC_E_INVALID; -+ -+ } -+ -+ inaddr = psgval->bInEndpointAddress; -+ outaddr = psgval->bOutEndpointAddress; -+ -+ epin = get_cfi_ep_by_addr(pcd->cfi, inaddr); -+ epout = get_cfi_ep_by_addr(pcd->cfi, outaddr); -+ -+ if (NULL == epin || NULL == epout) { -+ CFI_INFO -+ ("%s: Unable to get the endpoints inaddr=0x%02x outaddr=0x%02x\n", -+ __func__, inaddr, outaddr); -+ return -DWC_E_INVALID; -+ } -+ -+ epin->ep->dwc_ep.buff_mode = BM_SG; -+ dwc_memcpy(epin->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t)); -+ -+ epout->ep->dwc_ep.buff_mode = BM_SG; -+ dwc_memcpy(epout->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t)); -+ -+ return 0; -+} -+ -+/** -+ * This function sets a new value for the buffer Alignment setup. -+ */ -+static int cfi_ep_set_alignment_val(uint8_t * buf, struct dwc_otg_pcd *pcd) -+{ -+ cfi_ep_t *ep; -+ uint8_t addr; -+ ddma_align_buffer_setup_t *palignval; -+ -+ palignval = (ddma_align_buffer_setup_t *) buf; -+ addr = palignval->bEndpointAddress; -+ -+ ep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ -+ if (NULL == ep) { -+ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", -+ __func__, addr); -+ return -DWC_E_INVALID; -+ } -+ -+ ep->ep->dwc_ep.buff_mode = BM_ALIGN; -+ dwc_memcpy(ep->bm_align, palignval, sizeof(ddma_align_buffer_setup_t)); -+ -+ return 0; -+} -+ -+/** -+ * This function sets a new value for the Concatenation buffer setup. -+ */ -+static int cfi_ep_set_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd) -+{ -+ uint8_t addr; -+ cfi_ep_t *ep; -+ struct _ddma_concat_buffer_setup_hdr *pConcatValHdr; -+ uint16_t *pVals; -+ uint32_t desccount; -+ int i; -+ uint16_t mps; -+ -+ pConcatValHdr = (struct _ddma_concat_buffer_setup_hdr *)buf; -+ desccount = (uint32_t) pConcatValHdr->bDescCount; -+ pVals = (uint16_t *) (buf + BS_CONCAT_VAL_HDR_LEN); -+ -+ /* Check the DMA descriptor count */ -+ if (desccount > MAX_DMA_DESCS_PER_EP) { -+ CFI_INFO("%s: Maximum DMA Descriptor count should be %d\n", -+ __func__, MAX_DMA_DESCS_PER_EP); -+ return -DWC_E_INVALID; -+ } -+ -+ addr = pConcatValHdr->bEndpointAddress; -+ ep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ if (NULL == ep) { -+ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", -+ __func__, addr); -+ return -DWC_E_INVALID; -+ } -+ -+ mps = UGETW(ep->ep->desc->wMaxPacketSize); -+ -+#if 0 -+ for (i = 0; i < desccount; i++) { -+ CFI_INFO("%s: wTxSize[%d]=0x%04x\n", __func__, i, pVals[i]); -+ } -+ CFI_INFO("%s: epname=%s; mps=%d\n", __func__, ep->ep->ep.name, mps); -+#endif -+ -+ /* Check the wTxSizes to be less than or equal to the mps */ -+ for (i = 0; i < desccount; i++) { -+ if (pVals[i] > mps) { -+ CFI_INFO -+ ("%s: ERROR - the wTxSize[%d] should be <= MPS (wTxSize=%d)\n", -+ __func__, i, pVals[i]); -+ return -DWC_E_INVALID; -+ } -+ } -+ -+ ep->ep->dwc_ep.buff_mode = BM_CONCAT; -+ dwc_memcpy(ep->bm_concat, pConcatValHdr, BS_CONCAT_VAL_HDR_LEN); -+ -+ /* Free the previously allocated storage for the wTxBytes */ -+ if (ep->bm_concat->wTxBytes) { -+ DWC_FREE(ep->bm_concat->wTxBytes); -+ } -+ -+ /* Allocate a new storage for the wTxBytes field */ -+ ep->bm_concat->wTxBytes = -+ DWC_ALLOC(sizeof(uint16_t) * pConcatValHdr->bDescCount); -+ if (NULL == ep->bm_concat->wTxBytes) { -+ CFI_INFO("%s: Unable to allocate memory\n", __func__); -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ /* Copy the new values into the wTxBytes filed */ -+ dwc_memcpy(ep->bm_concat->wTxBytes, buf + BS_CONCAT_VAL_HDR_LEN, -+ sizeof(uint16_t) * pConcatValHdr->bDescCount); -+ -+ return 0; -+} -+ -+/** -+ * This function calculates the total of all FIFO sizes -+ * -+ * @param core_if Programming view of DWC_otg controller -+ * -+ * @return The total of data FIFO sizes. -+ * -+ */ -+static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_core_params_t *params = core_if->core_params; -+ uint16_t dfifo_total = 0; -+ int i; -+ -+ /* The shared RxFIFO size */ -+ dfifo_total = -+ params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size; -+ -+ /* Add up each TxFIFO size to the total */ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ dfifo_total += params->dev_tx_fifo_size[i]; -+ } -+ -+ return dfifo_total; -+} -+ -+/** -+ * This function returns Rx FIFO size -+ * -+ * @param core_if Programming view of DWC_otg controller -+ * -+ * @return The total of data FIFO sizes. -+ * -+ */ -+static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue) -+{ -+ switch (wValue >> 8) { -+ case 0: -+ return (core_if->pwron_rxfsiz < -+ 32768) ? core_if->pwron_rxfsiz : 32768; -+ break; -+ case 1: -+ return core_if->core_params->dev_rx_fifo_size; -+ break; -+ default: -+ return -DWC_E_INVALID; -+ break; -+ } -+} -+ -+/** -+ * This function returns Tx FIFO size for IN EP -+ * -+ * @param core_if Programming view of DWC_otg controller -+ * -+ * @return The total of data FIFO sizes. -+ * -+ */ -+static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ -+ ep = get_ep_by_addr(pcd, wValue & 0xff); -+ -+ if (NULL == ep) { -+ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", -+ __func__, wValue & 0xff); -+ return -DWC_E_INVALID; -+ } -+ -+ if (!ep->dwc_ep.is_in) { -+ CFI_INFO -+ ("%s: No Tx FIFO assingned to the Out endpoint addr=0x%02x\n", -+ __func__, wValue & 0xff); -+ return -DWC_E_INVALID; -+ } -+ -+ switch (wValue >> 8) { -+ case 0: -+ return (GET_CORE_IF(pcd)->pwron_txfsiz -+ [ep->dwc_ep.tx_fifo_num - 1] < -+ 768) ? GET_CORE_IF(pcd)->pwron_txfsiz[ep-> -+ dwc_ep.tx_fifo_num -+ - 1] : 32768; -+ break; -+ case 1: -+ return GET_CORE_IF(pcd)->core_params-> -+ dev_tx_fifo_size[ep->dwc_ep.num - 1]; -+ break; -+ default: -+ return -DWC_E_INVALID; -+ break; -+ } -+} -+ -+/** -+ * This function checks if the submitted combination of -+ * device mode FIFO sizes is possible or not. -+ * -+ * @param core_if Programming view of DWC_otg controller -+ * -+ * @return 1 if possible, 0 otherwise. -+ * -+ */ -+static uint8_t check_fifo_sizes(dwc_otg_core_if_t * core_if) -+{ -+ uint16_t dfifo_actual = 0; -+ dwc_otg_core_params_t *params = core_if->core_params; -+ uint16_t start_addr = 0; -+ int i; -+ -+ dfifo_actual = -+ params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size; -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ dfifo_actual += params->dev_tx_fifo_size[i]; -+ } -+ -+ if (dfifo_actual > core_if->total_fifo_size) { -+ return 0; -+ } -+ -+ if (params->dev_rx_fifo_size > 32768 || params->dev_rx_fifo_size < 16) -+ return 0; -+ -+ if (params->dev_nperio_tx_fifo_size > 32768 -+ || params->dev_nperio_tx_fifo_size < 16) -+ return 0; -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ -+ if (params->dev_tx_fifo_size[i] > 768 -+ || params->dev_tx_fifo_size[i] < 4) -+ return 0; -+ } -+ -+ if (params->dev_rx_fifo_size > core_if->pwron_rxfsiz) -+ return 0; -+ start_addr = params->dev_rx_fifo_size; -+ -+ if (params->dev_nperio_tx_fifo_size > core_if->pwron_gnptxfsiz) -+ return 0; -+ start_addr += params->dev_nperio_tx_fifo_size; -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ -+ if (params->dev_tx_fifo_size[i] > core_if->pwron_txfsiz[i]) -+ return 0; -+ start_addr += params->dev_tx_fifo_size[i]; -+ } -+ -+ return 1; -+} -+ -+/** -+ * This function resizes Device mode FIFOs -+ * -+ * @param core_if Programming view of DWC_otg controller -+ * -+ * @return 1 if successful, 0 otherwise -+ * -+ */ -+static uint8_t resize_fifos(dwc_otg_core_if_t * core_if) -+{ -+ int i = 0; -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ dwc_otg_core_params_t *params = core_if->core_params; -+ uint32_t rx_fifo_size; -+ fifosize_data_t nptxfifosize; -+ fifosize_data_t txfifosize[15]; -+ -+ uint32_t rx_fsz_bak; -+ uint32_t nptxfsz_bak; -+ uint32_t txfsz_bak[15]; -+ -+ uint16_t start_address; -+ uint8_t retval = 1; -+ -+ if (!check_fifo_sizes(core_if)) { -+ return 0; -+ } -+ -+ /* Configure data FIFO sizes */ -+ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { -+ rx_fsz_bak = DWC_READ_REG32(&global_regs->grxfsiz); -+ rx_fifo_size = params->dev_rx_fifo_size; -+ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size); -+ -+ /* -+ * Tx FIFOs These FIFOs are numbered from 1 to 15. -+ * Indexes of the FIFO size module parameters in the -+ * dev_tx_fifo_size array and the FIFO size registers in -+ * the dtxfsiz array run from 0 to 14. -+ */ -+ -+ /* Non-periodic Tx FIFO */ -+ nptxfsz_bak = DWC_READ_REG32(&global_regs->gnptxfsiz); -+ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; -+ start_address = params->dev_rx_fifo_size; -+ nptxfifosize.b.startaddr = start_address; -+ -+ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32); -+ -+ start_address += nptxfifosize.b.depth; -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ txfsz_bak[i] = DWC_READ_REG32(&global_regs->dtxfsiz[i]); -+ -+ txfifosize[i].b.depth = params->dev_tx_fifo_size[i]; -+ txfifosize[i].b.startaddr = start_address; -+ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], -+ txfifosize[i].d32); -+ -+ start_address += txfifosize[i].b.depth; -+ } -+ -+ /** Check if register values are set correctly */ -+ if (rx_fifo_size != DWC_READ_REG32(&global_regs->grxfsiz)) { -+ retval = 0; -+ } -+ -+ if (nptxfifosize.d32 != DWC_READ_REG32(&global_regs->gnptxfsiz)) { -+ retval = 0; -+ } -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ if (txfifosize[i].d32 != -+ DWC_READ_REG32(&global_regs->dtxfsiz[i])) { -+ retval = 0; -+ } -+ } -+ -+ /** If register values are not set correctly, reset old values */ -+ if (retval == 0) { -+ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fsz_bak); -+ -+ /* Non-periodic Tx FIFO */ -+ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfsz_bak); -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], -+ txfsz_bak[i]); -+ } -+ } -+ } else { -+ return 0; -+ } -+ -+ /* Flush the FIFOs */ -+ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */ -+ dwc_otg_flush_rx_fifo(core_if); -+ -+ return retval; -+} -+ -+/** -+ * This function sets a new value for the buffer Alignment setup. -+ */ -+static int cfi_ep_set_tx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd) -+{ -+ int retval; -+ uint32_t fsiz; -+ uint16_t size; -+ uint16_t ep_addr; -+ dwc_otg_pcd_ep_t *ep; -+ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; -+ tx_fifo_size_setup_t *ptxfifoval; -+ -+ ptxfifoval = (tx_fifo_size_setup_t *) buf; -+ ep_addr = ptxfifoval->bEndpointAddress; -+ size = ptxfifoval->wDepth; -+ -+ ep = get_ep_by_addr(pcd, ep_addr); -+ -+ CFI_INFO -+ ("%s: Set Tx FIFO size: endpoint addr=0x%02x, depth=%d, FIFO Num=%d\n", -+ __func__, ep_addr, size, ep->dwc_ep.tx_fifo_num); -+ -+ if (NULL == ep) { -+ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", -+ __func__, ep_addr); -+ return -DWC_E_INVALID; -+ } -+ -+ fsiz = params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1]; -+ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = size; -+ -+ if (resize_fifos(GET_CORE_IF(pcd))) { -+ retval = 0; -+ } else { -+ CFI_INFO -+ ("%s: Error setting the feature Tx FIFO Size for EP%d\n", -+ __func__, ep_addr); -+ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = fsiz; -+ retval = -DWC_E_INVALID; -+ } -+ -+ return retval; -+} -+ -+/** -+ * This function sets a new value for the buffer Alignment setup. -+ */ -+static int cfi_set_rx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd) -+{ -+ int retval; -+ uint32_t fsiz; -+ uint16_t size; -+ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; -+ rx_fifo_size_setup_t *prxfifoval; -+ -+ prxfifoval = (rx_fifo_size_setup_t *) buf; -+ size = prxfifoval->wDepth; -+ -+ fsiz = params->dev_rx_fifo_size; -+ params->dev_rx_fifo_size = size; -+ -+ if (resize_fifos(GET_CORE_IF(pcd))) { -+ retval = 0; -+ } else { -+ CFI_INFO("%s: Error setting the feature Rx FIFO Size\n", -+ __func__); -+ params->dev_rx_fifo_size = fsiz; -+ retval = -DWC_E_INVALID; -+ } -+ -+ return retval; -+} -+ -+/** -+ * This function reads the SG of an EP's buffer setup into the buffer buf -+ */ -+static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *req) -+{ -+ int retval = -DWC_E_INVALID; -+ uint8_t addr; -+ cfi_ep_t *ep; -+ -+ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ -+ addr = req->wValue & 0xFF; -+ if (addr == 0) /* The address should be non-zero */ -+ return retval; -+ -+ ep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ if (NULL == ep) { -+ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", -+ __func__, addr); -+ return retval; -+ } -+ -+ dwc_memcpy(buf, ep->bm_sg, BS_SG_VAL_DESC_LEN); -+ retval = BS_SG_VAL_DESC_LEN; -+ return retval; -+} -+ -+/** -+ * This function reads the Concatenation value of an EP's buffer mode into -+ * the buffer buf -+ */ -+static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *req) -+{ -+ int retval = -DWC_E_INVALID; -+ uint8_t addr; -+ cfi_ep_t *ep; -+ uint8_t desc_count; -+ -+ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ -+ addr = req->wValue & 0xFF; -+ if (addr == 0) /* The address should be non-zero */ -+ return retval; -+ -+ ep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ if (NULL == ep) { -+ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", -+ __func__, addr); -+ return retval; -+ } -+ -+ /* Copy the header to the buffer */ -+ dwc_memcpy(buf, ep->bm_concat, BS_CONCAT_VAL_HDR_LEN); -+ /* Advance the buffer pointer by the header size */ -+ buf += BS_CONCAT_VAL_HDR_LEN; -+ -+ desc_count = ep->bm_concat->hdr.bDescCount; -+ /* Copy alll the wTxBytes to the buffer */ -+ dwc_memcpy(buf, ep->bm_concat->wTxBytes, sizeof(uid16_t) * desc_count); -+ -+ retval = BS_CONCAT_VAL_HDR_LEN + sizeof(uid16_t) * desc_count; -+ return retval; -+} -+ -+/** -+ * This function reads the buffer Alignment value of an EP's buffer mode into -+ * the buffer buf -+ * -+ * @return The total number of bytes copied to the buffer or negative error code. -+ */ -+static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *req) -+{ -+ int retval = -DWC_E_INVALID; -+ uint8_t addr; -+ cfi_ep_t *ep; -+ -+ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ -+ addr = req->wValue & 0xFF; -+ if (addr == 0) /* The address should be non-zero */ -+ return retval; -+ -+ ep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ if (NULL == ep) { -+ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", -+ __func__, addr); -+ return retval; -+ } -+ -+ dwc_memcpy(buf, ep->bm_align, BS_ALIGN_VAL_HDR_LEN); -+ retval = BS_ALIGN_VAL_HDR_LEN; -+ -+ return retval; -+} -+ -+/** -+ * This function sets a new value for the specified feature -+ * -+ * @param pcd A pointer to the PCD object -+ * -+ * @return 0 if successful, negative error code otherwise to stall the DCE. -+ */ -+static int cfi_set_feature_value(struct dwc_otg_pcd *pcd) -+{ -+ int retval = -DWC_E_NOT_SUPPORTED; -+ uint16_t wIndex, wValue; -+ uint8_t bRequest; -+ struct dwc_otg_core_if *coreif; -+ cfiobject_t *cfi = pcd->cfi; -+ struct cfi_usb_ctrlrequest *ctrl_req; -+ uint8_t *buf; -+ ctrl_req = &cfi->ctrl_req; -+ -+ buf = pcd->cfi->ctrl_req.data; -+ -+ coreif = GET_CORE_IF(pcd); -+ bRequest = ctrl_req->bRequest; -+ wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex); -+ wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue); -+ -+ /* See which feature is to be modified */ -+ switch (wIndex) { -+ case FT_ID_DMA_BUFFER_SETUP: -+ /* Modify the feature */ -+ if ((retval = cfi_ep_set_sg_val(buf, pcd)) < 0) -+ return retval; -+ -+ /* And send this request to the gadget */ -+ cfi->need_gadget_att = 1; -+ break; -+ -+ case FT_ID_DMA_BUFF_ALIGN: -+ if ((retval = cfi_ep_set_alignment_val(buf, pcd)) < 0) -+ return retval; -+ cfi->need_gadget_att = 1; -+ break; -+ -+ case FT_ID_DMA_CONCAT_SETUP: -+ /* Modify the feature */ -+ if ((retval = cfi_ep_set_concat_val(buf, pcd)) < 0) -+ return retval; -+ cfi->need_gadget_att = 1; -+ break; -+ -+ case FT_ID_DMA_CIRCULAR: -+ CFI_INFO("FT_ID_DMA_CIRCULAR\n"); -+ break; -+ -+ case FT_ID_THRESHOLD_SETUP: -+ CFI_INFO("FT_ID_THRESHOLD_SETUP\n"); -+ break; -+ -+ case FT_ID_DFIFO_DEPTH: -+ CFI_INFO("FT_ID_DFIFO_DEPTH\n"); -+ break; -+ -+ case FT_ID_TX_FIFO_DEPTH: -+ CFI_INFO("FT_ID_TX_FIFO_DEPTH\n"); -+ if ((retval = cfi_ep_set_tx_fifo_val(buf, pcd)) < 0) -+ return retval; -+ cfi->need_gadget_att = 0; -+ break; -+ -+ case FT_ID_RX_FIFO_DEPTH: -+ CFI_INFO("FT_ID_RX_FIFO_DEPTH\n"); -+ if ((retval = cfi_set_rx_fifo_val(buf, pcd)) < 0) -+ return retval; -+ cfi->need_gadget_att = 0; -+ break; -+ } -+ -+ return retval; -+} -+ -+#endif //DWC_UTE_CFI ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_cfi.h -@@ -0,0 +1,320 @@ -+/* ========================================================================== -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#if !defined(__DWC_OTG_CFI_H__) -+#define __DWC_OTG_CFI_H__ -+ -+#include "dwc_otg_pcd.h" -+#include "dwc_cfi_common.h" -+ -+/** -+ * @file -+ * This file contains the CFI related OTG PCD specific common constants, -+ * interfaces(functions and macros) and data structures.The CFI Protocol is an -+ * optional interface for internal testing purposes that a DUT may implement to -+ * support testing of configurable features. -+ * -+ */ -+ -+struct dwc_otg_pcd; -+struct dwc_otg_pcd_ep; -+ -+/** OTG CFI Features (properties) ID constants */ -+/** This is a request for all Core Features */ -+#define FT_ID_DMA_MODE 0x0001 -+#define FT_ID_DMA_BUFFER_SETUP 0x0002 -+#define FT_ID_DMA_BUFF_ALIGN 0x0003 -+#define FT_ID_DMA_CONCAT_SETUP 0x0004 -+#define FT_ID_DMA_CIRCULAR 0x0005 -+#define FT_ID_THRESHOLD_SETUP 0x0006 -+#define FT_ID_DFIFO_DEPTH 0x0007 -+#define FT_ID_TX_FIFO_DEPTH 0x0008 -+#define FT_ID_RX_FIFO_DEPTH 0x0009 -+ -+/**********************************************************/ -+#define CFI_INFO_DEF -+ -+#ifdef CFI_INFO_DEF -+#define CFI_INFO(fmt...) DWC_PRINTF("CFI: " fmt); -+#else -+#define CFI_INFO(fmt...) -+#endif -+ -+#define min(x,y) ({ \ -+ x < y ? x : y; }) -+ -+#define max(x,y) ({ \ -+ x > y ? x : y; }) -+ -+/** -+ * Descriptor DMA SG Buffer setup structure (SG buffer). This structure is -+ * also used for setting up a buffer for Circular DDMA. -+ */ -+struct _ddma_sg_buffer_setup { -+#define BS_SG_VAL_DESC_LEN 6 -+ /* The OUT EP address */ -+ uint8_t bOutEndpointAddress; -+ /* The IN EP address */ -+ uint8_t bInEndpointAddress; -+ /* Number of bytes to put between transfer segments (must be DWORD boundaries) */ -+ uint8_t bOffset; -+ /* The number of transfer segments (a DMA descriptors per each segment) */ -+ uint8_t bCount; -+ /* Size (in byte) of each transfer segment */ -+ uint16_t wSize; -+} __attribute__ ((packed)); -+typedef struct _ddma_sg_buffer_setup ddma_sg_buffer_setup_t; -+ -+/** Descriptor DMA Concatenation Buffer setup structure */ -+struct _ddma_concat_buffer_setup_hdr { -+#define BS_CONCAT_VAL_HDR_LEN 4 -+ /* The endpoint for which the buffer is to be set up */ -+ uint8_t bEndpointAddress; -+ /* The count of descriptors to be used */ -+ uint8_t bDescCount; -+ /* The total size of the transfer */ -+ uint16_t wSize; -+} __attribute__ ((packed)); -+typedef struct _ddma_concat_buffer_setup_hdr ddma_concat_buffer_setup_hdr_t; -+ -+/** Descriptor DMA Concatenation Buffer setup structure */ -+struct _ddma_concat_buffer_setup { -+ /* The SG header */ -+ ddma_concat_buffer_setup_hdr_t hdr; -+ -+ /* The XFER sizes pointer (allocated dynamically) */ -+ uint16_t *wTxBytes; -+} __attribute__ ((packed)); -+typedef struct _ddma_concat_buffer_setup ddma_concat_buffer_setup_t; -+ -+/** Descriptor DMA Alignment Buffer setup structure */ -+struct _ddma_align_buffer_setup { -+#define BS_ALIGN_VAL_HDR_LEN 2 -+ uint8_t bEndpointAddress; -+ uint8_t bAlign; -+} __attribute__ ((packed)); -+typedef struct _ddma_align_buffer_setup ddma_align_buffer_setup_t; -+ -+/** Transmit FIFO Size setup structure */ -+struct _tx_fifo_size_setup { -+ uint8_t bEndpointAddress; -+ uint16_t wDepth; -+} __attribute__ ((packed)); -+typedef struct _tx_fifo_size_setup tx_fifo_size_setup_t; -+ -+/** Transmit FIFO Size setup structure */ -+struct _rx_fifo_size_setup { -+ uint16_t wDepth; -+} __attribute__ ((packed)); -+typedef struct _rx_fifo_size_setup rx_fifo_size_setup_t; -+ -+/** -+ * struct cfi_usb_ctrlrequest - the CFI implementation of the struct usb_ctrlrequest -+ * This structure encapsulates the standard usb_ctrlrequest and adds a pointer -+ * to the data returned in the data stage of a 3-stage Control Write requests. -+ */ -+struct cfi_usb_ctrlrequest { -+ uint8_t bRequestType; -+ uint8_t bRequest; -+ uint16_t wValue; -+ uint16_t wIndex; -+ uint16_t wLength; -+ uint8_t *data; -+} UPACKED; -+ -+/*---------------------------------------------------------------------------*/ -+ -+/** -+ * The CFI wrapper of the enabled and activated dwc_otg_pcd_ep structures. -+ * This structure is used to store the buffer setup data for any -+ * enabled endpoint in the PCD. -+ */ -+struct cfi_ep { -+ /* Entry for the list container */ -+ dwc_list_link_t lh; -+ /* Pointer to the active PCD endpoint structure */ -+ struct dwc_otg_pcd_ep *ep; -+ /* The last descriptor in the chain of DMA descriptors of the endpoint */ -+ struct dwc_otg_dma_desc *dma_desc_last; -+ /* The SG feature value */ -+ ddma_sg_buffer_setup_t *bm_sg; -+ /* The Circular feature value */ -+ ddma_sg_buffer_setup_t *bm_circ; -+ /* The Concatenation feature value */ -+ ddma_concat_buffer_setup_t *bm_concat; -+ /* The Alignment feature value */ -+ ddma_align_buffer_setup_t *bm_align; -+ /* XFER length */ -+ uint32_t xfer_len; -+ /* -+ * Count of DMA descriptors currently used. -+ * The total should not exceed the MAX_DMA_DESCS_PER_EP value -+ * defined in the dwc_otg_cil.h -+ */ -+ uint32_t desc_count; -+}; -+typedef struct cfi_ep cfi_ep_t; -+ -+typedef struct cfi_dma_buff { -+#define CFI_IN_BUF_LEN 1024 -+#define CFI_OUT_BUF_LEN 1024 -+ dma_addr_t addr; -+ uint8_t *buf; -+} cfi_dma_buff_t; -+ -+struct cfiobject; -+ -+/** -+ * This is the interface for the CFI operations. -+ * -+ * @param ep_enable Called when any endpoint is enabled and activated. -+ * @param release Called when the CFI object is released and it needs to correctly -+ * deallocate the dynamic memory -+ * @param ctrl_write_complete Called when the data stage of the request is complete -+ */ -+typedef struct cfi_ops { -+ int (*ep_enable) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd, -+ struct dwc_otg_pcd_ep * ep); -+ void *(*ep_alloc_buf) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd, -+ struct dwc_otg_pcd_ep * ep, dma_addr_t * dma, -+ unsigned size, gfp_t flags); -+ void (*release) (struct cfiobject * cfi); -+ int (*ctrl_write_complete) (struct cfiobject * cfi, -+ struct dwc_otg_pcd * pcd); -+ void (*build_descriptors) (struct cfiobject * cfi, -+ struct dwc_otg_pcd * pcd, -+ struct dwc_otg_pcd_ep * ep, -+ dwc_otg_pcd_request_t * req); -+} cfi_ops_t; -+ -+struct cfiobject { -+ cfi_ops_t ops; -+ struct dwc_otg_pcd *pcd; -+ struct usb_gadget *gadget; -+ -+ /* Buffers used to send/receive CFI-related request data */ -+ cfi_dma_buff_t buf_in; -+ cfi_dma_buff_t buf_out; -+ -+ /* CFI specific Control request wrapper */ -+ struct cfi_usb_ctrlrequest ctrl_req; -+ -+ /* The list of active EP's in the PCD of type cfi_ep_t */ -+ dwc_list_link_t active_eps; -+ -+ /* This flag shall control the propagation of a specific request -+ * to the gadget's processing routines. -+ * 0 - no gadget handling -+ * 1 - the gadget needs to know about this request (w/o completing a status -+ * phase - just return a 0 to the _setup callback) -+ */ -+ uint8_t need_gadget_att; -+ -+ /* Flag indicating whether the status IN phase needs to be -+ * completed by the PCD -+ */ -+ uint8_t need_status_in_complete; -+}; -+typedef struct cfiobject cfiobject_t; -+ -+#define DUMP_MSG -+ -+#if defined(DUMP_MSG) -+static inline void dump_msg(const u8 * buf, unsigned int length) -+{ -+ unsigned int start, num, i; -+ char line[52], *p; -+ -+ if (length >= 512) -+ return; -+ -+ start = 0; -+ while (length > 0) { -+ num = min(length, 16u); -+ p = line; -+ for (i = 0; i < num; ++i) { -+ if (i == 8) -+ *p++ = ' '; -+ DWC_SPRINTF(p, " %02x", buf[i]); -+ p += 3; -+ } -+ *p = 0; -+ DWC_DEBUG("%6x: %s\n", start, line); -+ buf += num; -+ start += num; -+ length -= num; -+ } -+} -+#else -+static inline void dump_msg(const u8 * buf, unsigned int length) -+{ -+} -+#endif -+ -+/** -+ * This function returns a pointer to cfi_ep_t object with the addr address. -+ */ -+static inline struct cfi_ep *get_cfi_ep_by_addr(struct cfiobject *cfi, -+ uint8_t addr) -+{ -+ struct cfi_ep *pcfiep; -+ dwc_list_link_t *tmp; -+ -+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { -+ pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); -+ -+ if (pcfiep->ep->desc->bEndpointAddress == addr) { -+ return pcfiep; -+ } -+ } -+ -+ return NULL; -+} -+ -+/** -+ * This function returns a pointer to cfi_ep_t object that matches -+ * the dwc_otg_pcd_ep object. -+ */ -+static inline struct cfi_ep *get_cfi_ep_by_pcd_ep(struct cfiobject *cfi, -+ struct dwc_otg_pcd_ep *ep) -+{ -+ struct cfi_ep *pcfiep = NULL; -+ dwc_list_link_t *tmp; -+ -+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { -+ pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); -+ if (pcfiep->ep == ep) { -+ return pcfiep; -+ } -+ } -+ return NULL; -+} -+ -+int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl); -+ -+#endif /* (__DWC_OTG_CFI_H__) */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_cil.c -@@ -0,0 +1,7141 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $ -+ * $Revision: #191 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+/** @file -+ * -+ * The Core Interface Layer provides basic services for accessing and -+ * managing the DWC_otg hardware. These services are used by both the -+ * Host Controller Driver and the Peripheral Controller Driver. -+ * -+ * The CIL manages the memory map for the core so that the HCD and PCD -+ * don't have to do this separately. It also handles basic tasks like -+ * reading/writing the registers and data FIFOs in the controller. -+ * Some of the data access functions provide encapsulation of several -+ * operations required to perform a task, such as writing multiple -+ * registers to start a transfer. Finally, the CIL performs basic -+ * services that are not specific to either the host or device modes -+ * of operation. These services include management of the OTG Host -+ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A -+ * Diagnostic API is also provided to allow testing of the controller -+ * hardware. -+ * -+ * The Core Interface Layer has the following requirements: -+ * - Provides basic controller operations. -+ * - Minimal use of OS services. -+ * - The OS services used will be abstracted by using inline functions -+ * or macros. -+ * -+ */ -+ -+#include "dwc_os.h" -+#include "dwc_otg_regs.h" -+#include "dwc_otg_cil.h" -+ -+static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if); -+ -+/** -+ * This function is called to initialize the DWC_otg CSR data -+ * structures. The register addresses in the device and host -+ * structures are initialized from the base address supplied by the -+ * caller. The calling function must make the OS calls to get the -+ * base address of the DWC_otg controller registers. The core_params -+ * argument holds the parameters that specify how the core should be -+ * configured. -+ * -+ * @param reg_base_addr Base address of DWC_otg core registers -+ * -+ */ -+dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * reg_base_addr) -+{ -+ dwc_otg_core_if_t *core_if = 0; -+ dwc_otg_dev_if_t *dev_if = 0; -+ dwc_otg_host_if_t *host_if = 0; -+ uint8_t *reg_base = (uint8_t *) reg_base_addr; -+ int i = 0; -+ -+ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, reg_base_addr); -+ -+ core_if = DWC_ALLOC(sizeof(dwc_otg_core_if_t)); -+ -+ if (core_if == NULL) { -+ DWC_DEBUGPL(DBG_CIL, -+ "Allocation of dwc_otg_core_if_t failed\n"); -+ return 0; -+ } -+ core_if->core_global_regs = (dwc_otg_core_global_regs_t *) reg_base; -+ -+ /* -+ * Allocate the Device Mode structures. -+ */ -+ dev_if = DWC_ALLOC(sizeof(dwc_otg_dev_if_t)); -+ -+ if (dev_if == NULL) { -+ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n"); -+ DWC_FREE(core_if); -+ return 0; -+ } -+ -+ dev_if->dev_global_regs = -+ (dwc_otg_device_global_regs_t *) (reg_base + -+ DWC_DEV_GLOBAL_REG_OFFSET); -+ -+ for (i = 0; i < MAX_EPS_CHANNELS; i++) { -+ dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *) -+ (reg_base + DWC_DEV_IN_EP_REG_OFFSET + -+ (i * DWC_EP_REG_OFFSET)); -+ -+ dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *) -+ (reg_base + DWC_DEV_OUT_EP_REG_OFFSET + -+ (i * DWC_EP_REG_OFFSET)); -+ DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n", -+ i, &dev_if->in_ep_regs[i]->diepctl); -+ DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n", -+ i, &dev_if->out_ep_regs[i]->doepctl); -+ } -+ -+ dev_if->speed = 0; // unknown -+ -+ core_if->dev_if = dev_if; -+ -+ /* -+ * Allocate the Host Mode structures. -+ */ -+ host_if = DWC_ALLOC(sizeof(dwc_otg_host_if_t)); -+ -+ if (host_if == NULL) { -+ DWC_DEBUGPL(DBG_CIL, -+ "Allocation of dwc_otg_host_if_t failed\n"); -+ DWC_FREE(dev_if); -+ DWC_FREE(core_if); -+ return 0; -+ } -+ -+ host_if->host_global_regs = (dwc_otg_host_global_regs_t *) -+ (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET); -+ -+ host_if->hprt0 = -+ (uint32_t *) (reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET); -+ -+ for (i = 0; i < MAX_EPS_CHANNELS; i++) { -+ host_if->hc_regs[i] = (dwc_otg_hc_regs_t *) -+ (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET + -+ (i * DWC_OTG_CHAN_REGS_OFFSET)); -+ DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n", -+ i, &host_if->hc_regs[i]->hcchar); -+ } -+ -+ host_if->num_host_channels = MAX_EPS_CHANNELS; -+ core_if->host_if = host_if; -+ -+ for (i = 0; i < MAX_EPS_CHANNELS; i++) { -+ core_if->data_fifo[i] = -+ (uint32_t *) (reg_base + DWC_OTG_DATA_FIFO_OFFSET + -+ (i * DWC_OTG_DATA_FIFO_SIZE)); -+ DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08lx\n", -+ i, (unsigned long)core_if->data_fifo[i]); -+ } -+ -+ core_if->pcgcctl = (uint32_t *) (reg_base + DWC_OTG_PCGCCTL_OFFSET); -+ -+ /* Initiate lx_state to L3 disconnected state */ -+ core_if->lx_state = DWC_OTG_L3; -+ /* -+ * Store the contents of the hardware configuration registers here for -+ * easy access later. -+ */ -+ core_if->hwcfg1.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg1); -+ core_if->hwcfg2.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2); -+ core_if->hwcfg3.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg3); -+ core_if->hwcfg4.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4); -+ -+ /* Force host mode to get HPTXFSIZ exact power on value */ -+ { -+ gusbcfg_data_t gusbcfg = {.d32 = 0 }; -+ gusbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ gusbcfg.b.force_host_mode = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32); -+ dwc_mdelay(100); -+ core_if->hptxfsiz.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz); -+ gusbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ gusbcfg.b.force_host_mode = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32); -+ dwc_mdelay(100); -+ } -+ -+ DWC_DEBUGPL(DBG_CILV, "hwcfg1=%08x\n", core_if->hwcfg1.d32); -+ DWC_DEBUGPL(DBG_CILV, "hwcfg2=%08x\n", core_if->hwcfg2.d32); -+ DWC_DEBUGPL(DBG_CILV, "hwcfg3=%08x\n", core_if->hwcfg3.d32); -+ DWC_DEBUGPL(DBG_CILV, "hwcfg4=%08x\n", core_if->hwcfg4.d32); -+ -+ core_if->hcfg.d32 = -+ DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); -+ core_if->dcfg.d32 = -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); -+ -+ DWC_DEBUGPL(DBG_CILV, "hcfg=%08x\n", core_if->hcfg.d32); -+ DWC_DEBUGPL(DBG_CILV, "dcfg=%08x\n", core_if->dcfg.d32); -+ -+ DWC_DEBUGPL(DBG_CILV, "op_mode=%0x\n", core_if->hwcfg2.b.op_mode); -+ DWC_DEBUGPL(DBG_CILV, "arch=%0x\n", core_if->hwcfg2.b.architecture); -+ DWC_DEBUGPL(DBG_CILV, "num_dev_ep=%d\n", core_if->hwcfg2.b.num_dev_ep); -+ DWC_DEBUGPL(DBG_CILV, "num_host_chan=%d\n", -+ core_if->hwcfg2.b.num_host_chan); -+ DWC_DEBUGPL(DBG_CILV, "nonperio_tx_q_depth=0x%0x\n", -+ core_if->hwcfg2.b.nonperio_tx_q_depth); -+ DWC_DEBUGPL(DBG_CILV, "host_perio_tx_q_depth=0x%0x\n", -+ core_if->hwcfg2.b.host_perio_tx_q_depth); -+ DWC_DEBUGPL(DBG_CILV, "dev_token_q_depth=0x%0x\n", -+ core_if->hwcfg2.b.dev_token_q_depth); -+ -+ DWC_DEBUGPL(DBG_CILV, "Total FIFO SZ=%d\n", -+ core_if->hwcfg3.b.dfifo_depth); -+ DWC_DEBUGPL(DBG_CILV, "xfer_size_cntr_width=%0x\n", -+ core_if->hwcfg3.b.xfer_size_cntr_width); -+ -+ /* -+ * Set the SRP sucess bit for FS-I2c -+ */ -+ core_if->srp_success = 0; -+ core_if->srp_timer_started = 0; -+ -+ /* -+ * Create new workqueue and init works -+ */ -+ core_if->wq_otg = DWC_WORKQ_ALLOC("dwc_otg"); -+ if (core_if->wq_otg == 0) { -+ DWC_WARN("DWC_WORKQ_ALLOC failed\n"); -+ DWC_FREE(host_if); -+ DWC_FREE(dev_if); -+ DWC_FREE(core_if); -+ return 0; -+ } -+ -+ core_if->snpsid = DWC_READ_REG32(&core_if->core_global_regs->gsnpsid); -+ -+ DWC_PRINTF("Core Release: %x.%x%x%x\n", -+ (core_if->snpsid >> 12 & 0xF), -+ (core_if->snpsid >> 8 & 0xF), -+ (core_if->snpsid >> 4 & 0xF), (core_if->snpsid & 0xF)); -+ -+ core_if->wkp_timer = DWC_TIMER_ALLOC("Wake Up Timer", -+ w_wakeup_detected, core_if); -+ if (core_if->wkp_timer == 0) { -+ DWC_WARN("DWC_TIMER_ALLOC failed\n"); -+ DWC_FREE(host_if); -+ DWC_FREE(dev_if); -+ DWC_WORKQ_FREE(core_if->wq_otg); -+ DWC_FREE(core_if); -+ return 0; -+ } -+ -+ if (dwc_otg_setup_params(core_if)) { -+ DWC_WARN("Error while setting core params\n"); -+ } -+ -+ core_if->hibernation_suspend = 0; -+ -+ /** ADP initialization */ -+ dwc_otg_adp_init(core_if); -+ -+ return core_if; -+} -+ -+/** -+ * This function frees the structures allocated by dwc_otg_cil_init(). -+ * -+ * @param core_if The core interface pointer returned from -+ * dwc_otg_cil_init(). -+ * -+ */ -+void dwc_otg_cil_remove(dwc_otg_core_if_t * core_if) -+{ -+ dctl_data_t dctl = {.d32 = 0 }; -+ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if); -+ -+ /* Disable all interrupts */ -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 1, 0); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0); -+ -+ dctl.b.sftdiscon = 1; -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, -+ dctl.d32); -+ } -+ -+ if (core_if->wq_otg) { -+ DWC_WORKQ_WAIT_WORK_DONE(core_if->wq_otg, 500); -+ DWC_WORKQ_FREE(core_if->wq_otg); -+ } -+ if (core_if->dev_if) { -+ DWC_FREE(core_if->dev_if); -+ } -+ if (core_if->host_if) { -+ DWC_FREE(core_if->host_if); -+ } -+ -+ /** Remove ADP Stuff */ -+ dwc_otg_adp_remove(core_if); -+ if (core_if->core_params) { -+ DWC_FREE(core_if->core_params); -+ } -+ if (core_if->wkp_timer) { -+ DWC_TIMER_FREE(core_if->wkp_timer); -+ } -+ if (core_if->srp_timer) { -+ DWC_TIMER_FREE(core_if->srp_timer); -+ } -+ DWC_FREE(core_if); -+} -+ -+/** -+ * This function enables the controller's Global Interrupt in the AHB Config -+ * register. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * core_if) -+{ -+ gahbcfg_data_t ahbcfg = {.d32 = 0 }; -+ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32); -+} -+ -+/** -+ * This function disables the controller's Global Interrupt in the AHB Config -+ * register. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * core_if) -+{ -+ gahbcfg_data_t ahbcfg = {.d32 = 0 }; -+ ahbcfg.b.glblintrmsk = 1; /* Disable interrupts */ -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0); -+} -+ -+/** -+ * This function initializes the commmon interrupts, used in both -+ * device and host modes. -+ * -+ * @param core_if Programming view of the DWC_otg controller -+ * -+ */ -+static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ /* Clear any pending OTG Interrupts */ -+ DWC_WRITE_REG32(&global_regs->gotgint, 0xFFFFFFFF); -+ -+ /* Clear any pending interrupts */ -+ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* -+ * Enable the interrupts in the GINTMSK. -+ */ -+ intr_mask.b.modemismatch = 1; -+ intr_mask.b.otgintr = 1; -+ -+ if (!core_if->dma_enable) { -+ intr_mask.b.rxstsqlvl = 1; -+ } -+ -+ intr_mask.b.conidstschng = 1; -+ intr_mask.b.wkupintr = 1; -+ intr_mask.b.disconnect = 0; -+ intr_mask.b.usbsuspend = 1; -+ intr_mask.b.sessreqintr = 1; -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ if (core_if->core_params->lpm_enable) { -+ intr_mask.b.lpmtranrcvd = 1; -+ } -+#endif -+ DWC_WRITE_REG32(&global_regs->gintmsk, intr_mask.d32); -+} -+ -+/* -+ * The restore operation is modified to support Synopsys Emulated Powerdown and -+ * Hibernation. This function is for exiting from Device mode hibernation by -+ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup. -+ * @param core_if Programming view of DWC_otg controller. -+ * @param rem_wakeup - indicates whether resume is initiated by Device or Host. -+ * @param reset - indicates whether resume is initiated by Reset. -+ */ -+int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, -+ int rem_wakeup, int reset) -+{ -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ dctl_data_t dctl = {.d32 = 0 }; -+ -+ int timeout = 2000; -+ -+ if (!core_if->hibernation_suspend) { -+ DWC_PRINTF("Already exited from Hibernation\n"); -+ return 1; -+ } -+ -+ DWC_DEBUGPL(DBG_PCD, "%s called\n", __FUNCTION__); -+ /* Switch-on voltage to the core */ -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Reset core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Assert Restore signal */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.restore = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable power clamps */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ if (rem_wakeup) { -+ dwc_udelay(70); -+ } -+ -+ /* Deassert Reset core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable PMU interrupt */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Mask interrupts from gpwrdn */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.connect_det_msk = 1; -+ gpwrdn.b.srp_det_msk = 1; -+ gpwrdn.b.disconn_det_msk = 1; -+ gpwrdn.b.rst_det_msk = 1; -+ gpwrdn.b.lnstchng_msk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Indicates that we are going out from hibernation */ -+ core_if->hibernation_suspend = 0; -+ -+ /* -+ * Set Restore Essential Regs bit in PCGCCTL register, restore_mode = 1 -+ * indicates restore from remote_wakeup -+ */ -+ restore_essential_regs(core_if, rem_wakeup, 0); -+ -+ /* -+ * Wait a little for seeing new value of variable hibernation_suspend if -+ * Restore done interrupt received before polling -+ */ -+ dwc_udelay(10); -+ -+ if (core_if->hibernation_suspend == 0) { -+ /* -+ * Wait For Restore_done Interrupt. This mechanism of polling the -+ * interrupt is introduced to avoid any possible race conditions -+ */ -+ do { -+ gintsts_data_t gintsts; -+ gintsts.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ if (gintsts.b.restoredone) { -+ gintsts.d32 = 0; -+ gintsts.b.restoredone = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs-> -+ gintsts, gintsts.d32); -+ DWC_PRINTF("Restore Done Interrupt seen\n"); -+ break; -+ } -+ dwc_udelay(10); -+ } while (--timeout); -+ if (!timeout) { -+ DWC_PRINTF("Restore Done interrupt wasn't generated here\n"); -+ } -+ } -+ /* Clear all pending interupts */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* De-assert Restore */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.restore = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ if (!rem_wakeup) { -+ pcgcctl.d32 = 0; -+ pcgcctl.b.rstpdwnmodule = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); -+ } -+ -+ /* Restore GUSBCFG and DCFG */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, -+ core_if->gr_backup->gusbcfg_local); -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, -+ core_if->dr_backup->dcfg); -+ -+ /* De-assert Wakeup Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ if (!rem_wakeup) { -+ /* Set Device programming done bit */ -+ dctl.b.pwronprgdone = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); -+ } else { -+ /* Start Remote Wakeup Signaling */ -+ dctl.d32 = core_if->dr_backup->dctl; -+ dctl.b.rmtwkupsig = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); -+ } -+ -+ dwc_mdelay(2); -+ /* Clear all pending interupts */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* Restore global registers */ -+ dwc_otg_restore_global_regs(core_if); -+ /* Restore device global registers */ -+ dwc_otg_restore_dev_regs(core_if, rem_wakeup); -+ -+ if (rem_wakeup) { -+ dwc_mdelay(7); -+ dctl.d32 = 0; -+ dctl.b.rmtwkupsig = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0); -+ } -+ -+ core_if->hibernation_suspend = 0; -+ /* The core will be in ON STATE */ -+ core_if->lx_state = DWC_OTG_L0; -+ DWC_PRINTF("Hibernation recovery completes here\n"); -+ -+ return 1; -+} -+ -+/* -+ * The restore operation is modified to support Synopsys Emulated Powerdown and -+ * Hibernation. This function is for exiting from Host mode hibernation by -+ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup. -+ * @param core_if Programming view of DWC_otg controller. -+ * @param rem_wakeup - indicates whether resume is initiated by Device or Host. -+ * @param reset - indicates whether resume is initiated by Reset. -+ */ -+int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if, -+ int rem_wakeup, int reset) -+{ -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ hprt0_data_t hprt0 = {.d32 = 0 }; -+ -+ int timeout = 2000; -+ -+ DWC_DEBUGPL(DBG_HCD, "%s called\n", __FUNCTION__); -+ /* Switch-on voltage to the core */ -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Reset core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Assert Restore signal */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.restore = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable power clamps */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ if (!rem_wakeup) { -+ dwc_udelay(50); -+ } -+ -+ /* Deassert Reset core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable PMU interrupt */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.connect_det_msk = 1; -+ gpwrdn.b.srp_det_msk = 1; -+ gpwrdn.b.disconn_det_msk = 1; -+ gpwrdn.b.rst_det_msk = 1; -+ gpwrdn.b.lnstchng_msk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Indicates that we are going out from hibernation */ -+ core_if->hibernation_suspend = 0; -+ -+ /* Set Restore Essential Regs bit in PCGCCTL register */ -+ restore_essential_regs(core_if, rem_wakeup, 1); -+ -+ /* Wait a little for seeing new value of variable hibernation_suspend if -+ * Restore done interrupt received before polling */ -+ dwc_udelay(10); -+ -+ if (core_if->hibernation_suspend == 0) { -+ /* Wait For Restore_done Interrupt. This mechanism of polling the -+ * interrupt is introduced to avoid any possible race conditions -+ */ -+ do { -+ gintsts_data_t gintsts; -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ if (gintsts.b.restoredone) { -+ gintsts.d32 = 0; -+ gintsts.b.restoredone = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ DWC_DEBUGPL(DBG_HCD,"Restore Done Interrupt seen\n"); -+ break; -+ } -+ dwc_udelay(10); -+ } while (--timeout); -+ if (!timeout) { -+ DWC_WARN("Restore Done interrupt wasn't generated\n"); -+ } -+ } -+ -+ /* Set the flag's value to 0 again after receiving restore done interrupt */ -+ core_if->hibernation_suspend = 0; -+ -+ /* This step is not described in functional spec but if not wait for this -+ * delay, mismatch interrupts occurred because just after restore core is -+ * in Device mode(gintsts.curmode == 0) */ -+ dwc_mdelay(100); -+ -+ /* Clear all pending interrupts */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* De-assert Restore */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.restore = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Restore GUSBCFG and HCFG */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, -+ core_if->gr_backup->gusbcfg_local); -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, -+ core_if->hr_backup->hcfg_local); -+ -+ /* De-assert Wakeup Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Start the Resume operation by programming HPRT0 */ -+ hprt0.d32 = core_if->hr_backup->hprt0_local; -+ hprt0.b.prtpwr = 1; -+ hprt0.b.prtena = 0; -+ hprt0.b.prtsusp = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ -+ DWC_PRINTF("Resume Starts Now\n"); -+ if (!reset) { // Indicates it is Resume Operation -+ hprt0.d32 = core_if->hr_backup->hprt0_local; -+ hprt0.b.prtres = 1; -+ hprt0.b.prtpwr = 1; -+ hprt0.b.prtena = 0; -+ hprt0.b.prtsusp = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ -+ if (!rem_wakeup) -+ hprt0.b.prtres = 0; -+ /* Wait for Resume time and then program HPRT again */ -+ dwc_mdelay(100); -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ -+ } else { // Indicates it is Reset Operation -+ hprt0.d32 = core_if->hr_backup->hprt0_local; -+ hprt0.b.prtrst = 1; -+ hprt0.b.prtpwr = 1; -+ hprt0.b.prtena = 0; -+ hprt0.b.prtsusp = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ /* Wait for Reset time and then program HPRT again */ -+ dwc_mdelay(60); -+ hprt0.b.prtrst = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ } -+ /* Clear all interrupt status */ -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtconndet = 1; -+ hprt0.b.prtenchng = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ -+ /* Clear all pending interupts */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* Restore global registers */ -+ dwc_otg_restore_global_regs(core_if); -+ /* Restore host global registers */ -+ dwc_otg_restore_host_regs(core_if, reset); -+ -+ /* The core will be in ON STATE */ -+ core_if->lx_state = DWC_OTG_L0; -+ DWC_PRINTF("Hibernation recovery is complete here\n"); -+ return 0; -+} -+ -+/** Saves some register values into system memory. */ -+int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if) -+{ -+ struct dwc_otg_global_regs_backup *gr; -+ int i; -+ -+ gr = core_if->gr_backup; -+ if (!gr) { -+ gr = DWC_ALLOC(sizeof(*gr)); -+ if (!gr) { -+ return -DWC_E_NO_MEMORY; -+ } -+ core_if->gr_backup = gr; -+ } -+ -+ gr->gotgctl_local = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+ gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); -+ gr->gahbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg); -+ gr->gusbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ gr->grxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); -+ gr->gnptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz); -+ gr->hptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz); -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ gr->glpmcfg_local = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+#endif -+ gr->gi2cctl_local = DWC_READ_REG32(&core_if->core_global_regs->gi2cctl); -+ gr->pcgcctl_local = DWC_READ_REG32(core_if->pcgcctl); -+ gr->gdfifocfg_local = -+ DWC_READ_REG32(&core_if->core_global_regs->gdfifocfg); -+ for (i = 0; i < MAX_EPS_CHANNELS; i++) { -+ gr->dtxfsiz_local[i] = -+ DWC_READ_REG32(&(core_if->core_global_regs->dtxfsiz[i])); -+ } -+ -+ DWC_DEBUGPL(DBG_ANY, "===========Backing Global registers==========\n"); -+ DWC_DEBUGPL(DBG_ANY, "Backed up gotgctl = %08x\n", gr->gotgctl_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk = %08x\n", gr->gintmsk_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up gahbcfg = %08x\n", gr->gahbcfg_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up gusbcfg = %08x\n", gr->gusbcfg_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up grxfsiz = %08x\n", gr->grxfsiz_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up gnptxfsiz = %08x\n", -+ gr->gnptxfsiz_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up hptxfsiz = %08x\n", -+ gr->hptxfsiz_local); -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ DWC_DEBUGPL(DBG_ANY, "Backed up glpmcfg = %08x\n", gr->glpmcfg_local); -+#endif -+ DWC_DEBUGPL(DBG_ANY, "Backed up gi2cctl = %08x\n", gr->gi2cctl_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up pcgcctl = %08x\n", gr->pcgcctl_local); -+ DWC_DEBUGPL(DBG_ANY,"Backed up gdfifocfg = %08x\n",gr->gdfifocfg_local); -+ -+ return 0; -+} -+ -+/** Saves GINTMSK register before setting the msk bits. */ -+int dwc_otg_save_gintmsk_reg(dwc_otg_core_if_t * core_if) -+{ -+ struct dwc_otg_global_regs_backup *gr; -+ -+ gr = core_if->gr_backup; -+ if (!gr) { -+ gr = DWC_ALLOC(sizeof(*gr)); -+ if (!gr) { -+ return -DWC_E_NO_MEMORY; -+ } -+ core_if->gr_backup = gr; -+ } -+ -+ gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); -+ -+ DWC_DEBUGPL(DBG_ANY,"=============Backing GINTMSK registers============\n"); -+ DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk = %08x\n", gr->gintmsk_local); -+ -+ return 0; -+} -+ -+int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if) -+{ -+ struct dwc_otg_dev_regs_backup *dr; -+ int i; -+ -+ dr = core_if->dr_backup; -+ if (!dr) { -+ dr = DWC_ALLOC(sizeof(*dr)); -+ if (!dr) { -+ return -DWC_E_NO_MEMORY; -+ } -+ core_if->dr_backup = dr; -+ } -+ -+ dr->dcfg = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); -+ dr->dctl = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); -+ dr->daintmsk = -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); -+ dr->diepmsk = -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->diepmsk); -+ dr->doepmsk = -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->doepmsk); -+ -+ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { -+ dr->diepctl[i] = -+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl); -+ dr->dieptsiz[i] = -+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz); -+ dr->diepdma[i] = -+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma); -+ } -+ -+ DWC_DEBUGPL(DBG_ANY, -+ "=============Backing Host registers==============\n"); -+ DWC_DEBUGPL(DBG_ANY, "Backed up dcfg = %08x\n", dr->dcfg); -+ DWC_DEBUGPL(DBG_ANY, "Backed up dctl = %08x\n", dr->dctl); -+ DWC_DEBUGPL(DBG_ANY, "Backed up daintmsk = %08x\n", -+ dr->daintmsk); -+ DWC_DEBUGPL(DBG_ANY, "Backed up diepmsk = %08x\n", dr->diepmsk); -+ DWC_DEBUGPL(DBG_ANY, "Backed up doepmsk = %08x\n", dr->doepmsk); -+ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { -+ DWC_DEBUGPL(DBG_ANY, "Backed up diepctl[%d] = %08x\n", i, -+ dr->diepctl[i]); -+ DWC_DEBUGPL(DBG_ANY, "Backed up dieptsiz[%d] = %08x\n", -+ i, dr->dieptsiz[i]); -+ DWC_DEBUGPL(DBG_ANY, "Backed up diepdma[%d] = %08x\n", i, -+ dr->diepdma[i]); -+ } -+ -+ return 0; -+} -+ -+int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if) -+{ -+ struct dwc_otg_host_regs_backup *hr; -+ int i; -+ -+ hr = core_if->hr_backup; -+ if (!hr) { -+ hr = DWC_ALLOC(sizeof(*hr)); -+ if (!hr) { -+ return -DWC_E_NO_MEMORY; -+ } -+ core_if->hr_backup = hr; -+ } -+ -+ hr->hcfg_local = -+ DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); -+ hr->haintmsk_local = -+ DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk); -+ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { -+ hr->hcintmsk_local[i] = -+ DWC_READ_REG32(&core_if->host_if->hc_regs[i]->hcintmsk); -+ } -+ hr->hprt0_local = DWC_READ_REG32(core_if->host_if->hprt0); -+ hr->hfir_local = -+ DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); -+ -+ DWC_DEBUGPL(DBG_ANY, -+ "=============Backing Host registers===============\n"); -+ DWC_DEBUGPL(DBG_ANY, "Backed up hcfg = %08x\n", -+ hr->hcfg_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up haintmsk = %08x\n", hr->haintmsk_local); -+ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { -+ DWC_DEBUGPL(DBG_ANY, "Backed up hcintmsk[%02d]=%08x\n", i, -+ hr->hcintmsk_local[i]); -+ } -+ DWC_DEBUGPL(DBG_ANY, "Backed up hprt0 = %08x\n", -+ hr->hprt0_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up hfir = %08x\n", -+ hr->hfir_local); -+ -+ return 0; -+} -+ -+int dwc_otg_restore_global_regs(dwc_otg_core_if_t *core_if) -+{ -+ struct dwc_otg_global_regs_backup *gr; -+ int i; -+ -+ gr = core_if->gr_backup; -+ if (!gr) { -+ return -DWC_E_INVALID; -+ } -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, gr->gotgctl_local); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gr->gintmsk_local); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gr->gusbcfg_local); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gr->gahbcfg_local); -+ DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, gr->grxfsiz_local); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz, -+ gr->gnptxfsiz_local); -+ DWC_WRITE_REG32(&core_if->core_global_regs->hptxfsiz, -+ gr->hptxfsiz_local); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gdfifocfg, -+ gr->gdfifocfg_local); -+ for (i = 0; i < MAX_EPS_CHANNELS; i++) { -+ DWC_WRITE_REG32(&core_if->core_global_regs->dtxfsiz[i], -+ gr->dtxfsiz_local[i]); -+ } -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ DWC_WRITE_REG32(core_if->host_if->hprt0, 0x0000100A); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, -+ (gr->gahbcfg_local)); -+ return 0; -+} -+ -+int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if, int rem_wakeup) -+{ -+ struct dwc_otg_dev_regs_backup *dr; -+ int i; -+ -+ dr = core_if->dr_backup; -+ -+ if (!dr) { -+ return -DWC_E_INVALID; -+ } -+ -+ if (!rem_wakeup) { -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, -+ dr->dctl); -+ } -+ -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, dr->daintmsk); -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, dr->diepmsk); -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, dr->doepmsk); -+ -+ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz, dr->dieptsiz[i]); -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma, dr->diepdma[i]); -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl, dr->diepctl[i]); -+ } -+ -+ return 0; -+} -+ -+int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset) -+{ -+ struct dwc_otg_host_regs_backup *hr; -+ int i; -+ hr = core_if->hr_backup; -+ -+ if (!hr) { -+ return -DWC_E_INVALID; -+ } -+ -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hr->hcfg_local); -+ //if (!reset) -+ //{ -+ // DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hr->hfir_local); -+ //} -+ -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk, -+ hr->haintmsk_local); -+ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { -+ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk, -+ hr->hcintmsk_local[i]); -+ } -+ -+ return 0; -+} -+ -+int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if) -+{ -+ struct dwc_otg_global_regs_backup *gr; -+ -+ gr = core_if->gr_backup; -+ -+ /* Restore values for LPM and I2C */ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, gr->glpmcfg_local); -+#endif -+ DWC_WRITE_REG32(&core_if->core_global_regs->gi2cctl, gr->gi2cctl_local); -+ -+ return 0; -+} -+ -+int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode, int is_host) -+{ -+ struct dwc_otg_global_regs_backup *gr; -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ gahbcfg_data_t gahbcfg = {.d32 = 0 }; -+ gusbcfg_data_t gusbcfg = {.d32 = 0 }; -+ gintmsk_data_t gintmsk = {.d32 = 0 }; -+ -+ /* Restore LPM and I2C registers */ -+ restore_lpm_i2c_regs(core_if); -+ -+ /* Set PCGCCTL to 0 */ -+ DWC_WRITE_REG32(core_if->pcgcctl, 0x00000000); -+ -+ gr = core_if->gr_backup; -+ /* Load restore values for [31:14] bits */ -+ DWC_WRITE_REG32(core_if->pcgcctl, -+ ((gr->pcgcctl_local & 0xffffc000) | 0x00020000)); -+ -+ /* Umnask global Interrupt in GAHBCFG and restore it */ -+ gahbcfg.d32 = gr->gahbcfg_local; -+ gahbcfg.b.glblintrmsk = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32); -+ -+ /* Clear all pending interupts */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* Unmask restore done interrupt */ -+ gintmsk.b.restoredone = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32); -+ -+ /* Restore GUSBCFG and HCFG/DCFG */ -+ gusbcfg.d32 = core_if->gr_backup->gusbcfg_local; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32); -+ -+ if (is_host) { -+ hcfg_data_t hcfg = {.d32 = 0 }; -+ hcfg.d32 = core_if->hr_backup->hcfg_local; -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, -+ hcfg.d32); -+ -+ /* Load restore values for [31:14] bits */ -+ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; -+ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; -+ -+ if (rmode) -+ pcgcctl.b.restoremode = 1; -+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); -+ dwc_udelay(10); -+ -+ /* Load restore values for [31:14] bits and set EssRegRestored bit */ -+ pcgcctl.d32 = gr->pcgcctl_local | 0xffffc000; -+ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; -+ pcgcctl.b.ess_reg_restored = 1; -+ if (rmode) -+ pcgcctl.b.restoremode = 1; -+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); -+ } else { -+ dcfg_data_t dcfg = {.d32 = 0 }; -+ dcfg.d32 = core_if->dr_backup->dcfg; -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); -+ -+ /* Load restore values for [31:14] bits */ -+ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; -+ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; -+ if (!rmode) { -+ pcgcctl.d32 |= 0x208; -+ } -+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); -+ dwc_udelay(10); -+ -+ /* Load restore values for [31:14] bits */ -+ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; -+ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; -+ pcgcctl.b.ess_reg_restored = 1; -+ if (!rmode) -+ pcgcctl.d32 |= 0x208; -+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); -+ } -+ -+ return 0; -+} -+ -+/** -+ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY -+ * type. -+ */ -+static void init_fslspclksel(dwc_otg_core_if_t * core_if) -+{ -+ uint32_t val; -+ hcfg_data_t hcfg; -+ -+ if (((core_if->hwcfg2.b.hs_phy_type == 2) && -+ (core_if->hwcfg2.b.fs_phy_type == 1) && -+ (core_if->core_params->ulpi_fs_ls)) || -+ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { -+ /* Full speed PHY */ -+ val = DWC_HCFG_48_MHZ; -+ } else { -+ /* High speed PHY running at full speed or high speed */ -+ val = DWC_HCFG_30_60_MHZ; -+ } -+ -+ DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val); -+ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); -+ hcfg.b.fslspclksel = val; -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32); -+} -+ -+/** -+ * Initializes the DevSpd field of the DCFG register depending on the PHY type -+ * and the enumeration speed of the device. -+ */ -+static void init_devspd(dwc_otg_core_if_t * core_if) -+{ -+ uint32_t val; -+ dcfg_data_t dcfg; -+ -+ if (((core_if->hwcfg2.b.hs_phy_type == 2) && -+ (core_if->hwcfg2.b.fs_phy_type == 1) && -+ (core_if->core_params->ulpi_fs_ls)) || -+ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { -+ /* Full speed PHY */ -+ val = 0x3; -+ } else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { -+ /* High speed PHY running at full speed */ -+ val = 0x1; -+ } else { -+ /* High speed PHY running at high speed */ -+ val = 0x0; -+ } -+ -+ DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val); -+ -+ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); -+ dcfg.b.devspd = val; -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); -+} -+ -+/** -+ * This function calculates the number of IN EPS -+ * using GHWCFG1 and GHWCFG2 registers values -+ * -+ * @param core_if Programming view of the DWC_otg controller -+ */ -+static uint32_t calc_num_in_eps(dwc_otg_core_if_t * core_if) -+{ -+ uint32_t num_in_eps = 0; -+ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; -+ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3; -+ uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps; -+ int i; -+ -+ for (i = 0; i < num_eps; ++i) { -+ if (!(hwcfg1 & 0x1)) -+ num_in_eps++; -+ -+ hwcfg1 >>= 2; -+ } -+ -+ if (core_if->hwcfg4.b.ded_fifo_en) { -+ num_in_eps = -+ (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps; -+ } -+ -+ return num_in_eps; -+} -+ -+/** -+ * This function calculates the number of OUT EPS -+ * using GHWCFG1 and GHWCFG2 registers values -+ * -+ * @param core_if Programming view of the DWC_otg controller -+ */ -+static uint32_t calc_num_out_eps(dwc_otg_core_if_t * core_if) -+{ -+ uint32_t num_out_eps = 0; -+ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; -+ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2; -+ int i; -+ -+ for (i = 0; i < num_eps; ++i) { -+ if (!(hwcfg1 & 0x1)) -+ num_out_eps++; -+ -+ hwcfg1 >>= 2; -+ } -+ return num_out_eps; -+} -+ -+/** -+ * This function initializes the DWC_otg controller registers and -+ * prepares the core for device mode or host mode operation. -+ * -+ * @param core_if Programming view of the DWC_otg controller -+ * -+ */ -+void dwc_otg_core_init(dwc_otg_core_if_t * core_if) -+{ -+ int i = 0; -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ gahbcfg_data_t ahbcfg = {.d32 = 0 }; -+ gusbcfg_data_t usbcfg = {.d32 = 0 }; -+ gi2cctl_data_t i2cctl = {.d32 = 0 }; -+ -+ DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p) regs at %p\n", -+ core_if, global_regs); -+ -+ /* Common Initialization */ -+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); -+ -+ /* Program the ULPI External VBUS bit if needed */ -+ usbcfg.b.ulpi_ext_vbus_drv = -+ (core_if->core_params->phy_ulpi_ext_vbus == -+ DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0; -+ -+ /* Set external TS Dline pulsing */ -+ usbcfg.b.term_sel_dl_pulse = -+ (core_if->core_params->ts_dline == 1) ? 1 : 0; -+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); -+ -+ /* Reset the Controller */ -+ dwc_otg_core_reset(core_if); -+ -+ core_if->adp_enable = core_if->core_params->adp_supp_enable; -+ core_if->power_down = core_if->core_params->power_down; -+ core_if->otg_sts = 0; -+ -+ /* Initialize parameters from Hardware configuration registers. */ -+ dev_if->num_in_eps = calc_num_in_eps(core_if); -+ dev_if->num_out_eps = calc_num_out_eps(core_if); -+ -+ DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", -+ core_if->hwcfg4.b.num_dev_perio_in_ep); -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { -+ dev_if->perio_tx_fifo_size[i] = -+ DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16; -+ DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n", -+ i, dev_if->perio_tx_fifo_size[i]); -+ } -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ dev_if->tx_fifo_size[i] = -+ DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16; -+ DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n", -+ i, dev_if->tx_fifo_size[i]); -+ } -+ -+ core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth; -+ core_if->rx_fifo_size = DWC_READ_REG32(&global_regs->grxfsiz); -+ core_if->nperio_tx_fifo_size = -+ DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16; -+ -+ DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size); -+ DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size); -+ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", -+ core_if->nperio_tx_fifo_size); -+ -+ /* This programming sequence needs to happen in FS mode before any other -+ * programming occurs */ -+ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) && -+ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { -+ /* If FS mode with FS PHY */ -+ -+ /* core_init() is now called on every switch so only call the -+ * following for the first time through. */ -+ if (!core_if->phy_init_done) { -+ core_if->phy_init_done = 1; -+ DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n"); -+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); -+ usbcfg.b.physel = 1; -+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); -+ -+ /* Reset after a PHY select */ -+ dwc_otg_core_reset(core_if); -+ } -+ -+ /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also -+ * do this on HNP Dev/Host mode switches (done in dev_init and -+ * host_init). */ -+ if (dwc_otg_is_host_mode(core_if)) { -+ init_fslspclksel(core_if); -+ } else { -+ init_devspd(core_if); -+ } -+ -+ if (core_if->core_params->i2c_enable) { -+ DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n"); -+ /* Program GUSBCFG.OtgUtmifsSel to I2C */ -+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); -+ usbcfg.b.otgutmifssel = 1; -+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); -+ -+ /* Program GI2CCTL.I2CEn */ -+ i2cctl.d32 = DWC_READ_REG32(&global_regs->gi2cctl); -+ i2cctl.b.i2cdevaddr = 1; -+ i2cctl.b.i2cen = 0; -+ DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32); -+ i2cctl.b.i2cen = 1; -+ DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32); -+ } -+ -+ } /* endif speed == DWC_SPEED_PARAM_FULL */ -+ else { -+ /* High speed PHY. */ -+ if (!core_if->phy_init_done) { -+ core_if->phy_init_done = 1; -+ /* HS PHY parameters. These parameters are preserved -+ * during soft reset so only program the first time. Do -+ * a soft reset immediately after setting phyif. */ -+ -+ if (core_if->core_params->phy_type == 2) { -+ /* ULPI interface */ -+ usbcfg.b.ulpi_utmi_sel = 1; -+ usbcfg.b.phyif = 0; -+ usbcfg.b.ddrsel = -+ core_if->core_params->phy_ulpi_ddr; -+ } else if (core_if->core_params->phy_type == 1) { -+ /* UTMI+ interface */ -+ usbcfg.b.ulpi_utmi_sel = 0; -+ if (core_if->core_params->phy_utmi_width == 16) { -+ usbcfg.b.phyif = 1; -+ -+ } else { -+ usbcfg.b.phyif = 0; -+ } -+ } else { -+ DWC_ERROR("FS PHY TYPE\n"); -+ } -+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); -+ /* Reset after setting the PHY parameters */ -+ dwc_otg_core_reset(core_if); -+ } -+ } -+ -+ if ((core_if->hwcfg2.b.hs_phy_type == 2) && -+ (core_if->hwcfg2.b.fs_phy_type == 1) && -+ (core_if->core_params->ulpi_fs_ls)) { -+ DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n"); -+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); -+ usbcfg.b.ulpi_fsls = 1; -+ usbcfg.b.ulpi_clk_sus_m = 1; -+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); -+ } else { -+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); -+ usbcfg.b.ulpi_fsls = 0; -+ usbcfg.b.ulpi_clk_sus_m = 0; -+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); -+ } -+ -+ /* Program the GAHBCFG Register. */ -+ switch (core_if->hwcfg2.b.architecture) { -+ -+ case DWC_SLAVE_ONLY_ARCH: -+ DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n"); -+ ahbcfg.b.nptxfemplvl_txfemplvl = -+ DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; -+ ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; -+ core_if->dma_enable = 0; -+ core_if->dma_desc_enable = 0; -+ break; -+ -+ case DWC_EXT_DMA_ARCH: -+ DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n"); -+ { -+ uint8_t brst_sz = core_if->core_params->dma_burst_size; -+ ahbcfg.b.hburstlen = 0; -+ while (brst_sz > 1) { -+ ahbcfg.b.hburstlen++; -+ brst_sz >>= 1; -+ } -+ } -+ core_if->dma_enable = (core_if->core_params->dma_enable != 0); -+ core_if->dma_desc_enable = -+ (core_if->core_params->dma_desc_enable != 0); -+ break; -+ -+ case DWC_INT_DMA_ARCH: -+ DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n"); -+ /* Old value was DWC_GAHBCFG_INT_DMA_BURST_INCR - done for -+ Host mode ISOC in issue fix - vahrama */ -+ /* Broadcom had altered to (1<<3)|(0<<0) - WRESP=1, max 4 beats */ -+ ahbcfg.b.hburstlen = (1<<3)|(0<<0);//DWC_GAHBCFG_INT_DMA_BURST_INCR4; -+ core_if->dma_enable = (core_if->core_params->dma_enable != 0); -+ core_if->dma_desc_enable = -+ (core_if->core_params->dma_desc_enable != 0); -+ break; -+ -+ } -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable) { -+ DWC_PRINTF("Using Descriptor DMA mode\n"); -+ } else { -+ DWC_PRINTF("Using Buffer DMA mode\n"); -+ -+ } -+ } else { -+ DWC_PRINTF("Using Slave mode\n"); -+ core_if->dma_desc_enable = 0; -+ } -+ -+ if (core_if->core_params->ahb_single) { -+ ahbcfg.b.ahbsingle = 1; -+ } -+ -+ ahbcfg.b.dmaenable = core_if->dma_enable; -+ DWC_WRITE_REG32(&global_regs->gahbcfg, ahbcfg.d32); -+ -+ core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en; -+ -+ core_if->pti_enh_enable = core_if->core_params->pti_enable != 0; -+ core_if->multiproc_int_enable = core_if->core_params->mpi_enable; -+ DWC_PRINTF("Periodic Transfer Interrupt Enhancement - %s\n", -+ ((core_if->pti_enh_enable) ? "enabled" : "disabled")); -+ DWC_PRINTF("Multiprocessor Interrupt Enhancement - %s\n", -+ ((core_if->multiproc_int_enable) ? "enabled" : "disabled")); -+ -+ /* -+ * Program the GUSBCFG register. -+ */ -+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); -+ -+ switch (core_if->hwcfg2.b.op_mode) { -+ case DWC_MODE_HNP_SRP_CAPABLE: -+ usbcfg.b.hnpcap = (core_if->core_params->otg_cap == -+ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE); -+ usbcfg.b.srpcap = (core_if->core_params->otg_cap != -+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); -+ break; -+ -+ case DWC_MODE_SRP_ONLY_CAPABLE: -+ usbcfg.b.hnpcap = 0; -+ usbcfg.b.srpcap = (core_if->core_params->otg_cap != -+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); -+ break; -+ -+ case DWC_MODE_NO_HNP_SRP_CAPABLE: -+ usbcfg.b.hnpcap = 0; -+ usbcfg.b.srpcap = 0; -+ break; -+ -+ case DWC_MODE_SRP_CAPABLE_DEVICE: -+ usbcfg.b.hnpcap = 0; -+ usbcfg.b.srpcap = (core_if->core_params->otg_cap != -+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); -+ break; -+ -+ case DWC_MODE_NO_SRP_CAPABLE_DEVICE: -+ usbcfg.b.hnpcap = 0; -+ usbcfg.b.srpcap = 0; -+ break; -+ -+ case DWC_MODE_SRP_CAPABLE_HOST: -+ usbcfg.b.hnpcap = 0; -+ usbcfg.b.srpcap = (core_if->core_params->otg_cap != -+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); -+ break; -+ -+ case DWC_MODE_NO_SRP_CAPABLE_HOST: -+ usbcfg.b.hnpcap = 0; -+ usbcfg.b.srpcap = 0; -+ break; -+ } -+ -+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ if (core_if->core_params->lpm_enable) { -+ glpmcfg_data_t lpmcfg = {.d32 = 0 }; -+ -+ /* To enable LPM support set lpm_cap_en bit */ -+ lpmcfg.b.lpm_cap_en = 1; -+ -+ /* Make AppL1Res ACK */ -+ lpmcfg.b.appl_resp = 1; -+ -+ /* Retry 3 times */ -+ lpmcfg.b.retry_count = 3; -+ -+ DWC_MODIFY_REG32(&core_if->core_global_regs->glpmcfg, -+ 0, lpmcfg.d32); -+ -+ } -+#endif -+ if (core_if->core_params->ic_usb_cap) { -+ gusbcfg_data_t gusbcfg = {.d32 = 0 }; -+ gusbcfg.b.ic_usb_cap = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gusbcfg, -+ 0, gusbcfg.d32); -+ } -+ { -+ gotgctl_data_t gotgctl = {.d32 = 0 }; -+ gotgctl.b.otgver = core_if->core_params->otg_ver; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl, 0, -+ gotgctl.d32); -+ /* Set OTG version supported */ -+ core_if->otg_ver = core_if->core_params->otg_ver; -+ DWC_PRINTF("OTG VER PARAM: %d, OTG VER FLAG: %d\n", -+ core_if->core_params->otg_ver, core_if->otg_ver); -+ } -+ -+ -+ /* Enable common interrupts */ -+ dwc_otg_enable_common_interrupts(core_if); -+ -+ /* Do device or host intialization based on mode during PCD -+ * and HCD initialization */ -+ if (dwc_otg_is_host_mode(core_if)) { -+ DWC_DEBUGPL(DBG_ANY, "Host Mode\n"); -+ core_if->op_state = A_HOST; -+ } else { -+ DWC_DEBUGPL(DBG_ANY, "Device Mode\n"); -+ core_if->op_state = B_PERIPHERAL; -+#ifdef DWC_DEVICE_ONLY -+ dwc_otg_core_dev_init(core_if); -+#endif -+ } -+} -+ -+/** -+ * This function enables the Device mode interrupts. -+ * -+ * @param core_if Programming view of DWC_otg controller -+ */ -+void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * core_if) -+{ -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ -+ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__); -+ -+ /* Disable all interrupts. */ -+ DWC_WRITE_REG32(&global_regs->gintmsk, 0); -+ -+ /* Clear any pending interrupts */ -+ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* Enable the common interrupts */ -+ dwc_otg_enable_common_interrupts(core_if); -+ -+ /* Enable interrupts */ -+ intr_mask.b.usbreset = 1; -+ intr_mask.b.enumdone = 1; -+ /* Disable Disconnect interrupt in Device mode */ -+ intr_mask.b.disconnect = 0; -+ -+ if (!core_if->multiproc_int_enable) { -+ intr_mask.b.inepintr = 1; -+ intr_mask.b.outepintr = 1; -+ } -+ -+ intr_mask.b.erlysuspend = 1; -+ -+ if (core_if->en_multiple_tx_fifo == 0) { -+ intr_mask.b.epmismatch = 1; -+ } -+ -+ //intr_mask.b.incomplisoout = 1; -+ intr_mask.b.incomplisoin = 1; -+ -+/* Enable the ignore frame number for ISOC xfers - MAS */ -+/* Disable to support high bandwith ISOC transfers - manukz */ -+#if 0 -+#ifdef DWC_UTE_PER_IO -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable) { -+ dctl_data_t dctl1 = {.d32 = 0 }; -+ dctl1.b.ifrmnum = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ dctl, 0, dctl1.d32); -+ DWC_DEBUG("----Enabled Ignore frame number (0x%08x)", -+ DWC_READ_REG32(&core_if->dev_if-> -+ dev_global_regs->dctl)); -+ } -+ } -+#endif -+#endif -+#ifdef DWC_EN_ISOC -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable == 0) { -+ if (core_if->pti_enh_enable) { -+ dctl_data_t dctl = {.d32 = 0 }; -+ dctl.b.ifrmnum = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ dev_if->dev_global_regs->dctl, -+ 0, dctl.d32); -+ } else { -+ intr_mask.b.incomplisoin = 1; -+ intr_mask.b.incomplisoout = 1; -+ } -+ } -+ } else { -+ intr_mask.b.incomplisoin = 1; -+ intr_mask.b.incomplisoout = 1; -+ } -+#endif /* DWC_EN_ISOC */ -+ -+ /** @todo NGS: Should this be a module parameter? */ -+#ifdef USE_PERIODIC_EP -+ intr_mask.b.isooutdrop = 1; -+ intr_mask.b.eopframe = 1; -+ intr_mask.b.incomplisoin = 1; -+ intr_mask.b.incomplisoout = 1; -+#endif -+ -+ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); -+ -+ DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, -+ DWC_READ_REG32(&global_regs->gintmsk)); -+} -+ -+/** -+ * This function initializes the DWC_otg controller registers for -+ * device mode. -+ * -+ * @param core_if Programming view of DWC_otg controller -+ * -+ */ -+void dwc_otg_core_dev_init(dwc_otg_core_if_t * core_if) -+{ -+ int i; -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ dwc_otg_core_params_t *params = core_if->core_params; -+ dcfg_data_t dcfg = {.d32 = 0 }; -+ depctl_data_t diepctl = {.d32 = 0 }; -+ grstctl_t resetctl = {.d32 = 0 }; -+ uint32_t rx_fifo_size; -+ fifosize_data_t nptxfifosize; -+ fifosize_data_t txfifosize; -+ dthrctl_data_t dthrctl; -+ fifosize_data_t ptxfifosize; -+ uint16_t rxfsiz, nptxfsiz; -+ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; -+ hwcfg3_data_t hwcfg3 = {.d32 = 0 }; -+ -+ /* Restart the Phy Clock */ -+ DWC_WRITE_REG32(core_if->pcgcctl, 0); -+ -+ /* Device configuration register */ -+ init_devspd(core_if); -+ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); -+ dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0; -+ dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80; -+ /* Enable Device OUT NAK in case of DDMA mode*/ -+ if (core_if->core_params->dev_out_nak) { -+ dcfg.b.endevoutnak = 1; -+ } -+ -+ if (core_if->core_params->cont_on_bna) { -+ dctl_data_t dctl = {.d32 = 0 }; -+ dctl.b.encontonbna = 1; -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32); -+ } -+ -+ -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); -+ -+ /* Configure data FIFO sizes */ -+ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { -+ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", -+ core_if->total_fifo_size); -+ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", -+ params->dev_rx_fifo_size); -+ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", -+ params->dev_nperio_tx_fifo_size); -+ -+ /* Rx FIFO */ -+ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->grxfsiz)); -+ -+#ifdef DWC_UTE_CFI -+ core_if->pwron_rxfsiz = DWC_READ_REG32(&global_regs->grxfsiz); -+ core_if->init_rxfsiz = params->dev_rx_fifo_size; -+#endif -+ rx_fifo_size = params->dev_rx_fifo_size; -+ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size); -+ -+ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->grxfsiz)); -+ -+ /** Set Periodic Tx FIFO Mask all bits 0 */ -+ core_if->p_tx_msk = 0; -+ -+ /** Set Tx FIFO Mask all bits 0 */ -+ core_if->tx_msk = 0; -+ -+ if (core_if->en_multiple_tx_fifo == 0) { -+ /* Non-periodic Tx FIFO */ -+ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->gnptxfsiz)); -+ -+ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; -+ nptxfifosize.b.startaddr = params->dev_rx_fifo_size; -+ -+ DWC_WRITE_REG32(&global_regs->gnptxfsiz, -+ nptxfifosize.d32); -+ -+ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->gnptxfsiz)); -+ -+ /**@todo NGS: Fix Periodic FIFO Sizing! */ -+ /* -+ * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15. -+ * Indexes of the FIFO size module parameters in the -+ * dev_perio_tx_fifo_size array and the FIFO size registers in -+ * the dptxfsiz array run from 0 to 14. -+ */ -+ /** @todo Finish debug of this */ -+ ptxfifosize.b.startaddr = -+ nptxfifosize.b.startaddr + nptxfifosize.b.depth; -+ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { -+ ptxfifosize.b.depth = -+ params->dev_perio_tx_fifo_size[i]; -+ DWC_DEBUGPL(DBG_CIL, -+ "initial dtxfsiz[%d]=%08x\n", i, -+ DWC_READ_REG32(&global_regs->dtxfsiz -+ [i])); -+ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], -+ ptxfifosize.d32); -+ DWC_DEBUGPL(DBG_CIL, "new dtxfsiz[%d]=%08x\n", -+ i, -+ DWC_READ_REG32(&global_regs->dtxfsiz -+ [i])); -+ ptxfifosize.b.startaddr += ptxfifosize.b.depth; -+ } -+ } else { -+ /* -+ * Tx FIFOs These FIFOs are numbered from 1 to 15. -+ * Indexes of the FIFO size module parameters in the -+ * dev_tx_fifo_size array and the FIFO size registers in -+ * the dtxfsiz array run from 0 to 14. -+ */ -+ -+ /* Non-periodic Tx FIFO */ -+ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->gnptxfsiz)); -+ -+#ifdef DWC_UTE_CFI -+ core_if->pwron_gnptxfsiz = -+ (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16); -+ core_if->init_gnptxfsiz = -+ params->dev_nperio_tx_fifo_size; -+#endif -+ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; -+ nptxfifosize.b.startaddr = params->dev_rx_fifo_size; -+ -+ DWC_WRITE_REG32(&global_regs->gnptxfsiz, -+ nptxfifosize.d32); -+ -+ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->gnptxfsiz)); -+ -+ txfifosize.b.startaddr = -+ nptxfifosize.b.startaddr + nptxfifosize.b.depth; -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ -+ txfifosize.b.depth = -+ params->dev_tx_fifo_size[i]; -+ -+ DWC_DEBUGPL(DBG_CIL, -+ "initial dtxfsiz[%d]=%08x\n", -+ i, -+ DWC_READ_REG32(&global_regs->dtxfsiz -+ [i])); -+ -+#ifdef DWC_UTE_CFI -+ core_if->pwron_txfsiz[i] = -+ (DWC_READ_REG32 -+ (&global_regs->dtxfsiz[i]) >> 16); -+ core_if->init_txfsiz[i] = -+ params->dev_tx_fifo_size[i]; -+#endif -+ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], -+ txfifosize.d32); -+ -+ DWC_DEBUGPL(DBG_CIL, -+ "new dtxfsiz[%d]=%08x\n", -+ i, -+ DWC_READ_REG32(&global_regs->dtxfsiz -+ [i])); -+ -+ txfifosize.b.startaddr += txfifosize.b.depth; -+ } -+ if (core_if->snpsid <= OTG_CORE_REV_2_94a) { -+ /* Calculating DFIFOCFG for Device mode to include RxFIFO and NPTXFIFO */ -+ gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg); -+ hwcfg3.d32 = DWC_READ_REG32(&global_regs->ghwcfg3); -+ gdfifocfg.b.gdfifocfg = (DWC_READ_REG32(&global_regs->ghwcfg3) >> 16); -+ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); -+ rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff); -+ nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16); -+ gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz; -+ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); -+ } -+ } -+ -+ /* Flush the FIFOs */ -+ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */ -+ dwc_otg_flush_rx_fifo(core_if); -+ -+ /* Flush the Learning Queue. */ -+ resetctl.b.intknqflsh = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32); -+ -+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) { -+ core_if->start_predict = 0; -+ for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) { -+ core_if->nextep_seq[i] = 0xff; // 0xff - EP not active -+ } -+ core_if->nextep_seq[0] = 0; -+ core_if->first_in_nextep_seq = 0; -+ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl); -+ diepctl.b.nextep = 0; -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); -+ -+ /* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */ -+ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); -+ dcfg.b.epmscnt = 2; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); -+ -+ DWC_DEBUGPL(DBG_CILV,"%s first_in_nextep_seq= %2d; nextep_seq[]:\n", -+ __func__, core_if->first_in_nextep_seq); -+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { -+ DWC_DEBUGPL(DBG_CILV, "%2d ", core_if->nextep_seq[i]); -+ } -+ DWC_DEBUGPL(DBG_CILV,"\n"); -+ } -+ -+ /* Clear all pending Device Interrupts */ -+ /** @todo - if the condition needed to be checked -+ * or in any case all pending interrutps should be cleared? -+ */ -+ if (core_if->multiproc_int_enable) { -+ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { -+ DWC_WRITE_REG32(&dev_if-> -+ dev_global_regs->diepeachintmsk[i], 0); -+ } -+ } -+ -+ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { -+ DWC_WRITE_REG32(&dev_if-> -+ dev_global_regs->doepeachintmsk[i], 0); -+ } -+ -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF); -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk, 0); -+ } else { -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, 0); -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, 0); -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF); -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk, 0); -+ } -+ -+ for (i = 0; i <= dev_if->num_in_eps; i++) { -+ depctl_data_t depctl; -+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ if (depctl.b.epena) { -+ depctl.d32 = 0; -+ depctl.b.epdis = 1; -+ depctl.b.snak = 1; -+ } else { -+ depctl.d32 = 0; -+ } -+ -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); -+ -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, 0); -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, 0); -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepint, 0xFF); -+ } -+ -+ for (i = 0; i <= dev_if->num_out_eps; i++) { -+ depctl_data_t depctl; -+ depctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl); -+ if (depctl.b.epena) { -+ dctl_data_t dctl = {.d32 = 0 }; -+ gintmsk_data_t gintsts = {.d32 = 0 }; -+ doepint_data_t doepint = {.d32 = 0 }; -+ dctl.b.sgoutnak = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); -+ do { -+ dwc_udelay(10); -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ } while (!gintsts.b.goutnakeff); -+ gintsts.d32 = 0; -+ gintsts.b.goutnakeff = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ depctl.d32 = 0; -+ depctl.b.epdis = 1; -+ depctl.b.snak = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepctl, depctl.d32); -+ do { -+ dwc_udelay(10); -+ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[i]->doepint); -+ } while (!doepint.b.epdisabled); -+ -+ doepint.b.epdisabled = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepint, doepint.d32); -+ -+ dctl.d32 = 0; -+ dctl.b.cgoutnak = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); -+ } else { -+ depctl.d32 = 0; -+ } -+ -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32); -+ -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doeptsiz, 0); -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepdma, 0); -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepint, 0xFF); -+ } -+ -+ if (core_if->en_multiple_tx_fifo && core_if->dma_enable) { -+ dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1; -+ dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1; -+ dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1; -+ -+ dev_if->rx_thr_length = params->rx_thr_length; -+ dev_if->tx_thr_length = params->tx_thr_length; -+ -+ dev_if->setup_desc_index = 0; -+ -+ dthrctl.d32 = 0; -+ dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en; -+ dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en; -+ dthrctl.b.tx_thr_len = dev_if->tx_thr_length; -+ dthrctl.b.rx_thr_en = dev_if->rx_thr_en; -+ dthrctl.b.rx_thr_len = dev_if->rx_thr_length; -+ dthrctl.b.ahb_thr_ratio = params->ahb_thr_ratio; -+ -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dtknqr3_dthrctl, -+ dthrctl.d32); -+ -+ DWC_DEBUGPL(DBG_CIL, -+ "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n", -+ dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, -+ dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, -+ dthrctl.b.rx_thr_len); -+ -+ } -+ -+ dwc_otg_enable_device_interrupts(core_if); -+ -+ { -+ diepmsk_data_t msk = {.d32 = 0 }; -+ msk.b.txfifoundrn = 1; -+ if (core_if->multiproc_int_enable) { -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs-> -+ diepeachintmsk[0], msk.d32, msk.d32); -+ } else { -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk, -+ msk.d32, msk.d32); -+ } -+ } -+ -+ if (core_if->multiproc_int_enable) { -+ /* Set NAK on Babble */ -+ dctl_data_t dctl = {.d32 = 0 }; -+ dctl.b.nakonbble = 1; -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32); -+ } -+ -+ if (core_if->snpsid >= OTG_CORE_REV_2_94a) { -+ dctl_data_t dctl = {.d32 = 0 }; -+ dctl.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dctl); -+ dctl.b.sftdiscon = 0; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl, dctl.d32); -+ } -+} -+ -+/** -+ * This function enables the Host mode interrupts. -+ * -+ * @param core_if Programming view of DWC_otg controller -+ */ -+void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_DEBUGPL(DBG_CIL, "%s(%p)\n", __func__, core_if); -+ -+ /* Disable all interrupts. */ -+ DWC_WRITE_REG32(&global_regs->gintmsk, 0); -+ -+ /* Clear any pending interrupts. */ -+ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* Enable the common interrupts */ -+ dwc_otg_enable_common_interrupts(core_if); -+ -+ /* -+ * Enable host mode interrupts without disturbing common -+ * interrupts. -+ */ -+ -+ intr_mask.b.disconnect = 1; -+ intr_mask.b.portintr = 1; -+ intr_mask.b.hcintr = 1; -+ -+ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); -+} -+ -+/** -+ * This function disables the Host Mode interrupts. -+ * -+ * @param core_if Programming view of DWC_otg controller -+ */ -+void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__); -+ -+ /* -+ * Disable host mode interrupts without disturbing common -+ * interrupts. -+ */ -+ intr_mask.b.sofintr = 1; -+ intr_mask.b.portintr = 1; -+ intr_mask.b.hcintr = 1; -+ intr_mask.b.ptxfempty = 1; -+ intr_mask.b.nptxfempty = 1; -+ -+ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, 0); -+} -+ -+/** -+ * This function initializes the DWC_otg controller registers for -+ * host mode. -+ * -+ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the -+ * request queues. Host channels are reset to ensure that they are ready for -+ * performing transfers. -+ * -+ * @param core_if Programming view of DWC_otg controller -+ * -+ */ -+void dwc_otg_core_host_init(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ dwc_otg_host_if_t *host_if = core_if->host_if; -+ dwc_otg_core_params_t *params = core_if->core_params; -+ hprt0_data_t hprt0 = {.d32 = 0 }; -+ fifosize_data_t nptxfifosize; -+ fifosize_data_t ptxfifosize; -+ uint16_t rxfsiz, nptxfsiz, hptxfsiz; -+ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; -+ int i; -+ hcchar_data_t hcchar; -+ hcfg_data_t hcfg; -+ hfir_data_t hfir; -+ dwc_otg_hc_regs_t *hc_regs; -+ int num_channels; -+ gotgctl_data_t gotgctl = {.d32 = 0 }; -+ -+ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if); -+ -+ /* Restart the Phy Clock */ -+ DWC_WRITE_REG32(core_if->pcgcctl, 0); -+ -+ /* Initialize Host Configuration Register */ -+ init_fslspclksel(core_if); -+ if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { -+ hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg); -+ hcfg.b.fslssupp = 1; -+ DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32); -+ -+ } -+ -+ /* This bit allows dynamic reloading of the HFIR register -+ * during runtime. This bit needs to be programmed during -+ * initial configuration and its value must not be changed -+ * during runtime.*/ -+ if (core_if->core_params->reload_ctl == 1) { -+ hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir); -+ hfir.b.hfirrldctrl = 1; -+ DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32); -+ } -+ -+ if (core_if->core_params->dma_desc_enable) { -+ uint8_t op_mode = core_if->hwcfg2.b.op_mode; -+ if (! -+ (core_if->hwcfg4.b.desc_dma -+ && (core_if->snpsid >= OTG_CORE_REV_2_90a) -+ && ((op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) -+ || (op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) -+ || (op_mode == -+ DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG) -+ || (op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST) -+ || (op_mode == -+ DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST)))) { -+ -+ DWC_ERROR("Host can't operate in Descriptor DMA mode.\n" -+ "Either core version is below 2.90a or " -+ "GHWCFG2, GHWCFG4 registers' values do not allow Descriptor DMA in host mode.\n" -+ "To run the driver in Buffer DMA host mode set dma_desc_enable " -+ "module parameter to 0.\n"); -+ return; -+ } -+ hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg); -+ hcfg.b.descdma = 1; -+ DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32); -+ } -+ -+ /* Configure data FIFO sizes */ -+ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { -+ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", -+ core_if->total_fifo_size); -+ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", -+ params->host_rx_fifo_size); -+ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", -+ params->host_nperio_tx_fifo_size); -+ DWC_DEBUGPL(DBG_CIL, "P Tx FIFO Size=%d\n", -+ params->host_perio_tx_fifo_size); -+ -+ /* Rx FIFO */ -+ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->grxfsiz)); -+ DWC_WRITE_REG32(&global_regs->grxfsiz, -+ params->host_rx_fifo_size); -+ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->grxfsiz)); -+ -+ /* Non-periodic Tx FIFO */ -+ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->gnptxfsiz)); -+ nptxfifosize.b.depth = params->host_nperio_tx_fifo_size; -+ nptxfifosize.b.startaddr = params->host_rx_fifo_size; -+ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32); -+ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->gnptxfsiz)); -+ -+ /* Periodic Tx FIFO */ -+ DWC_DEBUGPL(DBG_CIL, "initial hptxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->hptxfsiz)); -+ ptxfifosize.b.depth = params->host_perio_tx_fifo_size; -+ ptxfifosize.b.startaddr = -+ nptxfifosize.b.startaddr + nptxfifosize.b.depth; -+ DWC_WRITE_REG32(&global_regs->hptxfsiz, ptxfifosize.d32); -+ DWC_DEBUGPL(DBG_CIL, "new hptxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->hptxfsiz)); -+ -+ if (core_if->en_multiple_tx_fifo -+ && core_if->snpsid <= OTG_CORE_REV_2_94a) { -+ /* Global DFIFOCFG calculation for Host mode - include RxFIFO, NPTXFIFO and HPTXFIFO */ -+ gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg); -+ rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff); -+ nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16); -+ hptxfsiz = (DWC_READ_REG32(&global_regs->hptxfsiz) >> 16); -+ gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz + hptxfsiz; -+ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); -+ } -+ } -+ -+ /* TODO - check this */ -+ /* Clear Host Set HNP Enable in the OTG Control Register */ -+ gotgctl.b.hstsethnpen = 1; -+ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); -+ /* Make sure the FIFOs are flushed. */ -+ dwc_otg_flush_tx_fifo(core_if, 0x10 /* all TX FIFOs */ ); -+ dwc_otg_flush_rx_fifo(core_if); -+ -+ /* Clear Host Set HNP Enable in the OTG Control Register */ -+ gotgctl.b.hstsethnpen = 1; -+ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); -+ -+ if (!core_if->core_params->dma_desc_enable) { -+ /* Flush out any leftover queued requests. */ -+ num_channels = core_if->core_params->host_channels; -+ -+ for (i = 0; i < num_channels; i++) { -+ hc_regs = core_if->host_if->hc_regs[i]; -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcchar.b.chen = 0; -+ hcchar.b.chdis = 1; -+ hcchar.b.epdir = 0; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ } -+ -+ /* Halt all channels to put them into a known state. */ -+ for (i = 0; i < num_channels; i++) { -+ int count = 0; -+ hc_regs = core_if->host_if->hc_regs[i]; -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcchar.b.chen = 1; -+ hcchar.b.chdis = 1; -+ hcchar.b.epdir = 0; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d regs %p\n", __func__, i, hc_regs); -+ do { -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ if (++count > 1000) { -+ DWC_ERROR -+ ("%s: Unable to clear halt on channel %d (timeout HCCHAR 0x%X @%p)\n", -+ __func__, i, hcchar.d32, &hc_regs->hcchar); -+ break; -+ } -+ dwc_udelay(1); -+ } while (hcchar.b.chen); -+ } -+ } -+ -+ /* Turn on the vbus power. */ -+ DWC_PRINTF("Init: Port Power? op_state=%d\n", core_if->op_state); -+ if (core_if->op_state == A_HOST) { -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ DWC_PRINTF("Init: Power Port (%d)\n", hprt0.b.prtpwr); -+ if (hprt0.b.prtpwr == 0) { -+ hprt0.b.prtpwr = 1; -+ DWC_WRITE_REG32(host_if->hprt0, hprt0.d32); -+ } -+ } -+ -+ dwc_otg_enable_host_interrupts(core_if); -+} -+ -+/** -+ * Prepares a host channel for transferring packets to/from a specific -+ * endpoint. The HCCHARn register is set up with the characteristics specified -+ * in _hc. Host channel interrupts that may need to be serviced while this -+ * transfer is in progress are enabled. -+ * -+ * @param core_if Programming view of DWC_otg controller -+ * @param hc Information needed to initialize the host channel -+ */ -+void dwc_otg_hc_init(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) -+{ -+ hcintmsk_data_t hc_intr_mask; -+ hcchar_data_t hcchar; -+ hcsplt_data_t hcsplt; -+ -+ uint8_t hc_num = hc->hc_num; -+ dwc_otg_host_if_t *host_if = core_if->host_if; -+ dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num]; -+ -+ /* Clear old interrupt conditions for this host channel. */ -+ hc_intr_mask.d32 = 0xFFFFFFFF; -+ hc_intr_mask.b.reserved14_31 = 0; -+ DWC_WRITE_REG32(&hc_regs->hcint, hc_intr_mask.d32); -+ -+ /* Enable channel interrupts required for this transfer. */ -+ hc_intr_mask.d32 = 0; -+ hc_intr_mask.b.chhltd = 1; -+ if (core_if->dma_enable) { -+ /* For Descriptor DMA mode core halts the channel on AHB error. Interrupt is not required */ -+ if (!core_if->dma_desc_enable) -+ hc_intr_mask.b.ahberr = 1; -+ else { -+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) -+ hc_intr_mask.b.xfercompl = 1; -+ } -+ -+ if (hc->error_state && !hc->do_split && -+ hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { -+ hc_intr_mask.b.ack = 1; -+ if (hc->ep_is_in) { -+ hc_intr_mask.b.datatglerr = 1; -+ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) { -+ hc_intr_mask.b.nak = 1; -+ } -+ } -+ } -+ } else { -+ switch (hc->ep_type) { -+ case DWC_OTG_EP_TYPE_CONTROL: -+ case DWC_OTG_EP_TYPE_BULK: -+ hc_intr_mask.b.xfercompl = 1; -+ hc_intr_mask.b.stall = 1; -+ hc_intr_mask.b.xacterr = 1; -+ hc_intr_mask.b.datatglerr = 1; -+ if (hc->ep_is_in) { -+ hc_intr_mask.b.bblerr = 1; -+ } else { -+ hc_intr_mask.b.nak = 1; -+ hc_intr_mask.b.nyet = 1; -+ if (hc->do_ping) { -+ hc_intr_mask.b.ack = 1; -+ } -+ } -+ -+ if (hc->do_split) { -+ hc_intr_mask.b.nak = 1; -+ if (hc->complete_split) { -+ hc_intr_mask.b.nyet = 1; -+ } else { -+ hc_intr_mask.b.ack = 1; -+ } -+ } -+ -+ if (hc->error_state) { -+ hc_intr_mask.b.ack = 1; -+ } -+ break; -+ case DWC_OTG_EP_TYPE_INTR: -+ hc_intr_mask.b.xfercompl = 1; -+ hc_intr_mask.b.nak = 1; -+ hc_intr_mask.b.stall = 1; -+ hc_intr_mask.b.xacterr = 1; -+ hc_intr_mask.b.datatglerr = 1; -+ hc_intr_mask.b.frmovrun = 1; -+ -+ if (hc->ep_is_in) { -+ hc_intr_mask.b.bblerr = 1; -+ } -+ if (hc->error_state) { -+ hc_intr_mask.b.ack = 1; -+ } -+ if (hc->do_split) { -+ if (hc->complete_split) { -+ hc_intr_mask.b.nyet = 1; -+ } else { -+ hc_intr_mask.b.ack = 1; -+ } -+ } -+ break; -+ case DWC_OTG_EP_TYPE_ISOC: -+ hc_intr_mask.b.xfercompl = 1; -+ hc_intr_mask.b.frmovrun = 1; -+ hc_intr_mask.b.ack = 1; -+ -+ if (hc->ep_is_in) { -+ hc_intr_mask.b.xacterr = 1; -+ hc_intr_mask.b.bblerr = 1; -+ } -+ break; -+ } -+ } -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, hc_intr_mask.d32); -+ -+ /* -+ * Program the HCCHARn register with the endpoint characteristics for -+ * the current transfer. -+ */ -+ hcchar.d32 = 0; -+ hcchar.b.devaddr = hc->dev_addr; -+ hcchar.b.epnum = hc->ep_num; -+ hcchar.b.epdir = hc->ep_is_in; -+ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW); -+ hcchar.b.eptype = hc->ep_type; -+ hcchar.b.mps = hc->max_packet; -+ -+ DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32); -+ -+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d, Dev Addr %d, EP #%d\n", -+ __func__, hc->hc_num, hcchar.b.devaddr, hcchar.b.epnum); -+ DWC_DEBUGPL(DBG_HCDV, " Is In %d, Is Low Speed %d, EP Type %d, " -+ "Max Pkt %d, Multi Cnt %d\n", -+ hcchar.b.epdir, hcchar.b.lspddev, hcchar.b.eptype, -+ hcchar.b.mps, hcchar.b.multicnt); -+ -+ /* -+ * Program the HCSPLIT register for SPLITs -+ */ -+ hcsplt.d32 = 0; -+ if (hc->do_split) { -+ DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", -+ hc->hc_num, -+ hc->complete_split ? "CSPLIT" : "SSPLIT"); -+ hcsplt.b.compsplt = hc->complete_split; -+ hcsplt.b.xactpos = hc->xact_pos; -+ hcsplt.b.hubaddr = hc->hub_addr; -+ hcsplt.b.prtaddr = hc->port_addr; -+ DWC_DEBUGPL(DBG_HCDV, "\t comp split %d\n", hc->complete_split); -+ DWC_DEBUGPL(DBG_HCDV, "\t xact pos %d\n", hc->xact_pos); -+ DWC_DEBUGPL(DBG_HCDV, "\t hub addr %d\n", hc->hub_addr); -+ DWC_DEBUGPL(DBG_HCDV, "\t port addr %d\n", hc->port_addr); -+ DWC_DEBUGPL(DBG_HCDV, "\t is_in %d\n", hc->ep_is_in); -+ DWC_DEBUGPL(DBG_HCDV, "\t Max Pkt: %d\n", hcchar.b.mps); -+ DWC_DEBUGPL(DBG_HCDV, "\t xferlen: %d\n", hc->xfer_len); -+ } -+ DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32); -+ -+} -+ -+/** -+ * Attempts to halt a host channel. This function should only be called in -+ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under -+ * normal circumstances in DMA mode, the controller halts the channel when the -+ * transfer is complete or a condition occurs that requires application -+ * intervention. -+ * -+ * In slave mode, checks for a free request queue entry, then sets the Channel -+ * Enable and Channel Disable bits of the Host Channel Characteristics -+ * register of the specified channel to intiate the halt. If there is no free -+ * request queue entry, sets only the Channel Disable bit of the HCCHARn -+ * register to flush requests for this channel. In the latter case, sets a -+ * flag to indicate that the host channel needs to be halted when a request -+ * queue slot is open. -+ * -+ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the -+ * HCCHARn register. The controller ensures there is space in the request -+ * queue before submitting the halt request. -+ * -+ * Some time may elapse before the core flushes any posted requests for this -+ * host channel and halts. The Channel Halted interrupt handler completes the -+ * deactivation of the host channel. -+ * -+ * @param core_if Controller register interface. -+ * @param hc Host channel to halt. -+ * @param halt_status Reason for halting the channel. -+ */ -+void dwc_otg_hc_halt(dwc_otg_core_if_t * core_if, -+ dwc_hc_t * hc, dwc_otg_halt_status_e halt_status) -+{ -+ gnptxsts_data_t nptxsts; -+ hptxsts_data_t hptxsts; -+ hcchar_data_t hcchar; -+ dwc_otg_hc_regs_t *hc_regs; -+ dwc_otg_core_global_regs_t *global_regs; -+ dwc_otg_host_global_regs_t *host_global_regs; -+ -+ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; -+ global_regs = core_if->core_global_regs; -+ host_global_regs = core_if->host_if->host_global_regs; -+ -+ DWC_ASSERT(!(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS), -+ "halt_status = %d\n", halt_status); -+ -+ if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || -+ halt_status == DWC_OTG_HC_XFER_AHB_ERR) { -+ /* -+ * Disable all channel interrupts except Ch Halted. The QTD -+ * and QH state associated with this transfer has been cleared -+ * (in the case of URB_DEQUEUE), so the channel needs to be -+ * shut down carefully to prevent crashes. -+ */ -+ hcintmsk_data_t hcintmsk; -+ hcintmsk.d32 = 0; -+ hcintmsk.b.chhltd = 1; -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, hcintmsk.d32); -+ -+ /* -+ * Make sure no other interrupts besides halt are currently -+ * pending. Handling another interrupt could cause a crash due -+ * to the QTD and QH state. -+ */ -+ DWC_WRITE_REG32(&hc_regs->hcint, ~hcintmsk.d32); -+ -+ /* -+ * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR -+ * even if the channel was already halted for some other -+ * reason. -+ */ -+ hc->halt_status = halt_status; -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ if (hcchar.b.chen == 0) { -+ /* -+ * The channel is either already halted or it hasn't -+ * started yet. In DMA mode, the transfer may halt if -+ * it finishes normally or a condition occurs that -+ * requires driver intervention. Don't want to halt -+ * the channel again. In either Slave or DMA mode, -+ * it's possible that the transfer has been assigned -+ * to a channel, but not started yet when an URB is -+ * dequeued. Don't want to halt a channel that hasn't -+ * started yet. -+ */ -+ return; -+ } -+ } -+ if (hc->halt_pending) { -+ /* -+ * A halt has already been issued for this channel. This might -+ * happen when a transfer is aborted by a higher level in -+ * the stack. -+ */ -+#ifdef DEBUG -+ DWC_PRINTF -+ ("*** %s: Channel %d, _hc->halt_pending already set ***\n", -+ __func__, hc->hc_num); -+ -+#endif -+ return; -+ } -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* No need to set the bit in DDMA for disabling the channel */ -+ //TODO check it everywhere channel is disabled -+ if (!core_if->core_params->dma_desc_enable) -+ hcchar.b.chen = 1; -+ hcchar.b.chdis = 1; -+ -+ if (!core_if->dma_enable) { -+ /* Check for space in the request queue to issue the halt. */ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || -+ hc->ep_type == DWC_OTG_EP_TYPE_BULK) { -+ nptxsts.d32 = DWC_READ_REG32(&global_regs->gnptxsts); -+ if (nptxsts.b.nptxqspcavail == 0) { -+ hcchar.b.chen = 0; -+ } -+ } else { -+ hptxsts.d32 = -+ DWC_READ_REG32(&host_global_regs->hptxsts); -+ if ((hptxsts.b.ptxqspcavail == 0) -+ || (core_if->queuing_high_bandwidth)) { -+ hcchar.b.chen = 0; -+ } -+ } -+ } -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ -+ hc->halt_status = halt_status; -+ -+ if (hcchar.b.chen) { -+ hc->halt_pending = 1; -+ hc->halt_on_queue = 0; -+ } else { -+ hc->halt_on_queue = 1; -+ } -+ -+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); -+ DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32); -+ DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", hc->halt_pending); -+ DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", hc->halt_on_queue); -+ DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", hc->halt_status); -+ -+ return; -+} -+ -+/** -+ * Clears the transfer state for a host channel. This function is normally -+ * called after a transfer is done and the host channel is being released. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param hc Identifies the host channel to clean up. -+ */ -+void dwc_otg_hc_cleanup(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) -+{ -+ dwc_otg_hc_regs_t *hc_regs; -+ -+ hc->xfer_started = 0; -+ -+ /* -+ * Clear channel interrupt enables and any unhandled channel interrupt -+ * conditions. -+ */ -+ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0); -+ DWC_WRITE_REG32(&hc_regs->hcint, 0xFFFFFFFF); -+#ifdef DEBUG -+ DWC_TIMER_CANCEL(core_if->hc_xfer_timer[hc->hc_num]); -+#endif -+} -+ -+/** -+ * Sets the channel property that indicates in which frame a periodic transfer -+ * should occur. This is always set to the _next_ frame. This function has no -+ * effect on non-periodic transfers. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param hc Identifies the host channel to set up and its properties. -+ * @param hcchar Current value of the HCCHAR register for the specified host -+ * channel. -+ */ -+static inline void hc_set_even_odd_frame(dwc_otg_core_if_t * core_if, -+ dwc_hc_t * hc, hcchar_data_t * hcchar) -+{ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || -+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { -+ hfnum_data_t hfnum; -+ hfnum.d32 = -+ DWC_READ_REG32(&core_if->host_if->host_global_regs->hfnum); -+ -+ /* 1 if _next_ frame is odd, 0 if it's even */ -+ hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1; -+#ifdef DEBUG -+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split -+ && !hc->complete_split) { -+ switch (hfnum.b.frnum & 0x7) { -+ case 7: -+ core_if->hfnum_7_samples++; -+ core_if->hfnum_7_frrem_accum += hfnum.b.frrem; -+ break; -+ case 0: -+ core_if->hfnum_0_samples++; -+ core_if->hfnum_0_frrem_accum += hfnum.b.frrem; -+ break; -+ default: -+ core_if->hfnum_other_samples++; -+ core_if->hfnum_other_frrem_accum += -+ hfnum.b.frrem; -+ break; -+ } -+ } -+#endif -+ } -+} -+ -+#ifdef DEBUG -+void hc_xfer_timeout(void *ptr) -+{ -+ hc_xfer_info_t *xfer_info = NULL; -+ int hc_num = 0; -+ -+ if (ptr) -+ xfer_info = (hc_xfer_info_t *) ptr; -+ -+ if (!xfer_info->hc) { -+ DWC_ERROR("xfer_info->hc = %p\n", xfer_info->hc); -+ return; -+ } -+ -+ hc_num = xfer_info->hc->hc_num; -+ DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num); -+ DWC_WARN(" start_hcchar_val 0x%08x\n", -+ xfer_info->core_if->start_hcchar_val[hc_num]); -+} -+#endif -+ -+void ep_xfer_timeout(void *ptr) -+{ -+ ep_xfer_info_t *xfer_info = NULL; -+ int ep_num = 0; -+ dctl_data_t dctl = {.d32 = 0 }; -+ gintsts_data_t gintsts = {.d32 = 0 }; -+ gintmsk_data_t gintmsk = {.d32 = 0 }; -+ -+ if (ptr) -+ xfer_info = (ep_xfer_info_t *) ptr; -+ -+ if (!xfer_info->ep) { -+ DWC_ERROR("xfer_info->ep = %p\n", xfer_info->ep); -+ return; -+ } -+ -+ ep_num = xfer_info->ep->num; -+ DWC_WARN("%s: timeout on endpoit %d\n", __func__, ep_num); -+ /* Put the sate to 2 as it was time outed */ -+ xfer_info->state = 2; -+ -+ dctl.d32 = -+ DWC_READ_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl); -+ gintsts.d32 = -+ DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintsts); -+ gintmsk.d32 = -+ DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintmsk); -+ -+ if (!gintmsk.b.goutnakeff) { -+ /* Unmask it */ -+ gintmsk.b.goutnakeff = 1; -+ DWC_WRITE_REG32(&xfer_info->core_if->core_global_regs->gintmsk, -+ gintmsk.d32); -+ -+ } -+ -+ if (!gintsts.b.goutnakeff) { -+ dctl.b.sgoutnak = 1; -+ } -+ DWC_WRITE_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl, -+ dctl.d32); -+ -+} -+ -+void set_pid_isoc(dwc_hc_t * hc) -+{ -+ /* Set up the initial PID for the transfer. */ -+ if (hc->speed == DWC_OTG_EP_SPEED_HIGH) { -+ if (hc->ep_is_in) { -+ if (hc->multi_count == 1) { -+ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; -+ } else if (hc->multi_count == 2) { -+ hc->data_pid_start = DWC_OTG_HC_PID_DATA1; -+ } else { -+ hc->data_pid_start = DWC_OTG_HC_PID_DATA2; -+ } -+ } else { -+ if (hc->multi_count == 1) { -+ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; -+ } else { -+ hc->data_pid_start = DWC_OTG_HC_PID_MDATA; -+ } -+ } -+ } else { -+ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; -+ } -+} -+ -+/** -+ * This function does the setup for a data transfer for a host channel and -+ * starts the transfer. May be called in either Slave mode or DMA mode. In -+ * Slave mode, the caller must ensure that there is sufficient space in the -+ * request queue and Tx Data FIFO. -+ * -+ * For an OUT transfer in Slave mode, it loads a data packet into the -+ * appropriate FIFO. If necessary, additional data packets will be loaded in -+ * the Host ISR. -+ * -+ * For an IN transfer in Slave mode, a data packet is requested. The data -+ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, -+ * additional data packets are requested in the Host ISR. -+ * -+ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ -+ * register along with a packet count of 1 and the channel is enabled. This -+ * causes a single PING transaction to occur. Other fields in HCTSIZ are -+ * simply set to 0 since no data transfer occurs in this case. -+ * -+ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with -+ * all the information required to perform the subsequent data transfer. In -+ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the -+ * controller performs the entire PING protocol, then starts the data -+ * transfer. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param hc Information needed to initialize the host channel. The xfer_len -+ * value may be reduced to accommodate the max widths of the XferSize and -+ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed -+ * to reflect the final xfer_len value. -+ */ -+void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) -+{ -+ hcchar_data_t hcchar; -+ hctsiz_data_t hctsiz; -+ uint16_t num_packets; -+ uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size; -+ uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count; -+ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; -+ -+ hctsiz.d32 = 0; -+ -+ if (hc->do_ping) { -+ if (!core_if->dma_enable) { -+ dwc_otg_hc_do_ping(core_if, hc); -+ hc->xfer_started = 1; -+ return; -+ } else { -+ hctsiz.b.dopng = 1; -+ } -+ } -+ -+ if (hc->do_split) { -+ num_packets = 1; -+ -+ if (hc->complete_split && !hc->ep_is_in) { -+ /* For CSPLIT OUT Transfer, set the size to 0 so the -+ * core doesn't expect any data written to the FIFO */ -+ hc->xfer_len = 0; -+ } else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) { -+ hc->xfer_len = hc->max_packet; -+ } else if (!hc->ep_is_in && (hc->xfer_len > 188)) { -+ hc->xfer_len = 188; -+ } -+ -+ hctsiz.b.xfersize = hc->xfer_len; -+ } else { -+ /* -+ * Ensure that the transfer length and packet count will fit -+ * in the widths allocated for them in the HCTSIZn register. -+ */ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || -+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { -+ /* -+ * Make sure the transfer size is no larger than one -+ * (micro)frame's worth of data. (A check was done -+ * when the periodic transfer was accepted to ensure -+ * that a (micro)frame's worth of data can be -+ * programmed into a channel.) -+ */ -+ uint32_t max_periodic_len = -+ hc->multi_count * hc->max_packet; -+ if (hc->xfer_len > max_periodic_len) { -+ hc->xfer_len = max_periodic_len; -+ } else { -+ } -+ } else if (hc->xfer_len > max_hc_xfer_size) { -+ /* Make sure that xfer_len is a multiple of max packet size. */ -+ hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1; -+ } -+ -+ if (hc->xfer_len > 0) { -+ num_packets = -+ (hc->xfer_len + hc->max_packet - -+ 1) / hc->max_packet; -+ if (num_packets > max_hc_pkt_count) { -+ num_packets = max_hc_pkt_count; -+ hc->xfer_len = num_packets * hc->max_packet; -+ } -+ } else { -+ /* Need 1 packet for transfer length of 0. */ -+ num_packets = 1; -+ } -+ -+ if (hc->ep_is_in) { -+ /* Always program an integral # of max packets for IN transfers. */ -+ hc->xfer_len = num_packets * hc->max_packet; -+ } -+ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || -+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { -+ /* -+ * Make sure that the multi_count field matches the -+ * actual transfer length. -+ */ -+ hc->multi_count = num_packets; -+ } -+ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) -+ set_pid_isoc(hc); -+ -+ hctsiz.b.xfersize = hc->xfer_len; -+ } -+ -+ hc->start_pkt_count = num_packets; -+ hctsiz.b.pktcnt = num_packets; -+ hctsiz.b.pid = hc->data_pid_start; -+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); -+ -+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); -+ DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize); -+ DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt); -+ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); -+ -+ if (core_if->dma_enable) { -+ dwc_dma_t dma_addr; -+ if (hc->align_buff) { -+ dma_addr = hc->align_buff; -+ } else { -+ dma_addr = ((unsigned long)hc->xfer_buff & 0xffffffff); -+ } -+ DWC_WRITE_REG32(&hc_regs->hcdma, dma_addr); -+ } -+ -+ /* Start the split */ -+ if (hc->do_split) { -+ hcsplt_data_t hcsplt; -+ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); -+ hcsplt.b.spltena = 1; -+ DWC_WRITE_REG32(&hc_regs->hcsplt, hcsplt.d32); -+ } -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcchar.b.multicnt = hc->multi_count; -+ hc_set_even_odd_frame(core_if, hc, &hcchar); -+#ifdef DEBUG -+ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32; -+ if (hcchar.b.chdis) { -+ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", -+ __func__, hc->hc_num, hcchar.d32); -+ } -+#endif -+ -+ /* Set host channel enable after all other setup is complete. */ -+ hcchar.b.chen = 1; -+ hcchar.b.chdis = 0; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ -+ hc->xfer_started = 1; -+ hc->requests++; -+ -+ if (!core_if->dma_enable && !hc->ep_is_in && hc->xfer_len > 0) { -+ /* Load OUT packet into the appropriate Tx FIFO. */ -+ dwc_otg_hc_write_packet(core_if, hc); -+ } -+#ifdef DEBUG -+ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) { -+ DWC_DEBUGPL(DBG_HCDV, "transfer %d from core_if %p\n", -+ hc->hc_num, core_if);//GRAYG -+ core_if->hc_xfer_info[hc->hc_num].core_if = core_if; -+ core_if->hc_xfer_info[hc->hc_num].hc = hc; -+ -+ /* Start a timer for this transfer. */ -+ DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000); -+ } -+#endif -+} -+ -+/** -+ * This function does the setup for a data transfer for a host channel -+ * and starts the transfer in Descriptor DMA mode. -+ * -+ * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set. -+ * Sets PID and NTD values. For periodic transfers -+ * initializes SCHED_INFO field with micro-frame bitmap. -+ * -+ * Initializes HCDMA register with descriptor list address and CTD value -+ * then starts the transfer via enabling the channel. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param hc Information needed to initialize the host channel. -+ */ -+void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) -+{ -+ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; -+ hcchar_data_t hcchar; -+ hctsiz_data_t hctsiz; -+ hcdma_data_t hcdma; -+ -+ hctsiz.d32 = 0; -+ -+ if (hc->do_ping) -+ hctsiz.b_ddma.dopng = 1; -+ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) -+ set_pid_isoc(hc); -+ -+ /* Packet Count and Xfer Size are not used in Descriptor DMA mode */ -+ hctsiz.b_ddma.pid = hc->data_pid_start; -+ hctsiz.b_ddma.ntd = hc->ntd - 1; /* 0 - 1 descriptor, 1 - 2 descriptors, etc. */ -+ hctsiz.b_ddma.schinfo = hc->schinfo; /* Non-zero only for high-speed interrupt endpoints */ -+ -+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); -+ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); -+ DWC_DEBUGPL(DBG_HCDV, " NTD: %d\n", hctsiz.b_ddma.ntd); -+ -+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); -+ -+ hcdma.d32 = 0; -+ hcdma.b.dma_addr = ((uint32_t) hc->desc_list_addr) >> 11; -+ -+ /* Always start from first descriptor. */ -+ hcdma.b.ctd = 0; -+ DWC_WRITE_REG32(&hc_regs->hcdma, hcdma.d32); -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcchar.b.multicnt = hc->multi_count; -+ -+#ifdef DEBUG -+ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32; -+ if (hcchar.b.chdis) { -+ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", -+ __func__, hc->hc_num, hcchar.d32); -+ } -+#endif -+ -+ /* Set host channel enable after all other setup is complete. */ -+ hcchar.b.chen = 1; -+ hcchar.b.chdis = 0; -+ -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ -+ hc->xfer_started = 1; -+ hc->requests++; -+ -+#ifdef DEBUG -+ if ((hc->ep_type != DWC_OTG_EP_TYPE_INTR) -+ && (hc->ep_type != DWC_OTG_EP_TYPE_ISOC)) { -+ DWC_DEBUGPL(DBG_HCDV, "DMA transfer %d from core_if %p\n", -+ hc->hc_num, core_if);//GRAYG -+ core_if->hc_xfer_info[hc->hc_num].core_if = core_if; -+ core_if->hc_xfer_info[hc->hc_num].hc = hc; -+ /* Start a timer for this transfer. */ -+ DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000); -+ } -+#endif -+ -+} -+ -+/** -+ * This function continues a data transfer that was started by previous call -+ * to dwc_otg_hc_start_transfer. The caller must ensure there is -+ * sufficient space in the request queue and Tx Data FIFO. This function -+ * should only be called in Slave mode. In DMA mode, the controller acts -+ * autonomously to complete transfers programmed to a host channel. -+ * -+ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO -+ * if there is any data remaining to be queued. For an IN transfer, another -+ * data packet is always requested. For the SETUP phase of a control transfer, -+ * this function does nothing. -+ * -+ * @return 1 if a new request is queued, 0 if no more requests are required -+ * for this transfer. -+ */ -+int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) -+{ -+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); -+ -+ if (hc->do_split) { -+ /* SPLITs always queue just once per channel */ -+ return 0; -+ } else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { -+ /* SETUPs are queued only once since they can't be NAKed. */ -+ return 0; -+ } else if (hc->ep_is_in) { -+ /* -+ * Always queue another request for other IN transfers. If -+ * back-to-back INs are issued and NAKs are received for both, -+ * the driver may still be processing the first NAK when the -+ * second NAK is received. When the interrupt handler clears -+ * the NAK interrupt for the first NAK, the second NAK will -+ * not be seen. So we can't depend on the NAK interrupt -+ * handler to requeue a NAKed request. Instead, IN requests -+ * are issued each time this function is called. When the -+ * transfer completes, the extra requests for the channel will -+ * be flushed. -+ */ -+ hcchar_data_t hcchar; -+ dwc_otg_hc_regs_t *hc_regs = -+ core_if->host_if->hc_regs[hc->hc_num]; -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hc_set_even_odd_frame(core_if, hc, &hcchar); -+ hcchar.b.chen = 1; -+ hcchar.b.chdis = 0; -+ DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", -+ hcchar.d32); -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ hc->requests++; -+ return 1; -+ } else { -+ /* OUT transfers. */ -+ if (hc->xfer_count < hc->xfer_len) { -+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || -+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { -+ hcchar_data_t hcchar; -+ dwc_otg_hc_regs_t *hc_regs; -+ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hc_set_even_odd_frame(core_if, hc, &hcchar); -+ } -+ -+ /* Load OUT packet into the appropriate Tx FIFO. */ -+ dwc_otg_hc_write_packet(core_if, hc); -+ hc->requests++; -+ return 1; -+ } else { -+ return 0; -+ } -+ } -+} -+ -+/** -+ * Starts a PING transfer. This function should only be called in Slave mode. -+ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled. -+ */ -+void dwc_otg_hc_do_ping(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) -+{ -+ hcchar_data_t hcchar; -+ hctsiz_data_t hctsiz; -+ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; -+ -+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); -+ -+ hctsiz.d32 = 0; -+ hctsiz.b.dopng = 1; -+ hctsiz.b.pktcnt = 1; -+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcchar.b.chen = 1; -+ hcchar.b.chdis = 0; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+} -+ -+/* -+ * This function writes a packet into the Tx FIFO associated with the Host -+ * Channel. For a channel associated with a non-periodic EP, the non-periodic -+ * Tx FIFO is written. For a channel associated with a periodic EP, the -+ * periodic Tx FIFO is written. This function should only be called in Slave -+ * mode. -+ * -+ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by -+ * then number of bytes written to the Tx FIFO. -+ */ -+void dwc_otg_hc_write_packet(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) -+{ -+ uint32_t i; -+ uint32_t remaining_count; -+ uint32_t byte_count; -+ uint32_t dword_count; -+ -+ uint32_t *data_buff = (uint32_t *) (hc->xfer_buff); -+ uint32_t *data_fifo = core_if->data_fifo[hc->hc_num]; -+ -+ remaining_count = hc->xfer_len - hc->xfer_count; -+ if (remaining_count > hc->max_packet) { -+ byte_count = hc->max_packet; -+ } else { -+ byte_count = remaining_count; -+ } -+ -+ dword_count = (byte_count + 3) / 4; -+ -+ if ((((unsigned long)data_buff) & 0x3) == 0) { -+ /* xfer_buff is DWORD aligned. */ -+ for (i = 0; i < dword_count; i++, data_buff++) { -+ DWC_WRITE_REG32(data_fifo, *data_buff); -+ } -+ } else { -+ /* xfer_buff is not DWORD aligned. */ -+ for (i = 0; i < dword_count; i++, data_buff++) { -+ uint32_t data; -+ data = -+ (data_buff[0] | data_buff[1] << 8 | data_buff[2] << -+ 16 | data_buff[3] << 24); -+ DWC_WRITE_REG32(data_fifo, data); -+ } -+ } -+ -+ hc->xfer_count += byte_count; -+ hc->xfer_buff += byte_count; -+} -+ -+/** -+ * Gets the current USB frame number. This is the frame number from the last -+ * SOF packet. -+ */ -+uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * core_if) -+{ -+ dsts_data_t dsts; -+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ -+ /* read current frame/microframe number from DSTS register */ -+ return dsts.b.soffn; -+} -+ -+/** -+ * Calculates and gets the frame Interval value of HFIR register according PHY -+ * type and speed.The application can modify a value of HFIR register only after -+ * the Port Enable bit of the Host Port Control and Status register -+ * (HPRT.PrtEnaPort) has been set. -+*/ -+ -+uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if) -+{ -+ gusbcfg_data_t usbcfg; -+ hwcfg2_data_t hwcfg2; -+ hprt0_data_t hprt0; -+ int clock = 60; // default value -+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ hwcfg2.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2); -+ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); -+ if (!usbcfg.b.physel && usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif) -+ clock = 60; -+ if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 3) -+ clock = 48; -+ if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel && -+ !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif) -+ clock = 30; -+ if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel && -+ !usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif) -+ clock = 60; -+ if (usbcfg.b.phylpwrclksel && !usbcfg.b.physel && -+ !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif) -+ clock = 48; -+ if (usbcfg.b.physel && !usbcfg.b.phyif && hwcfg2.b.fs_phy_type == 2) -+ clock = 48; -+ if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 1) -+ clock = 48; -+ if (hprt0.b.prtspd == 0) -+ /* High speed case */ -+ return 125 * clock - 1; -+ else -+ /* FS/LS case */ -+ return 1000 * clock - 1; -+} -+ -+/** -+ * This function reads a setup packet from the Rx FIFO into the destination -+ * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl) -+ * Interrupt routine when a SETUP packet has been received in Slave mode. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param dest Destination buffer for packet data. -+ */ -+void dwc_otg_read_setup_packet(dwc_otg_core_if_t * core_if, uint32_t * dest) -+{ -+ device_grxsts_data_t status; -+ /* Get the 8 bytes of a setup transaction data */ -+ -+ /* Pop 2 DWORDS off the receive data FIFO into memory */ -+ dest[0] = DWC_READ_REG32(core_if->data_fifo[0]); -+ dest[1] = DWC_READ_REG32(core_if->data_fifo[0]); -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { -+ status.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->grxstsp); -+ DWC_DEBUGPL(DBG_ANY, -+ "EP:%d BCnt:%d " "pktsts:%x Frame:%d(0x%0x)\n", -+ status.b.epnum, status.b.bcnt, status.b.pktsts, -+ status.b.fn, status.b.fn); -+ } -+} -+ -+/** -+ * This function enables EP0 OUT to receive SETUP packets and configures EP0 -+ * IN for transmitting packets. It is normally called when the -+ * "Enumeration Done" interrupt occurs. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP0 data. -+ */ -+void dwc_otg_ep0_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ dsts_data_t dsts; -+ depctl_data_t diepctl; -+ depctl_data_t doepctl; -+ dctl_data_t dctl = {.d32 = 0 }; -+ -+ ep->stp_rollover = 0; -+ /* Read the Device Status and Endpoint 0 Control registers */ -+ dsts.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dsts); -+ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl); -+ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl); -+ -+ /* Set the MPS of the IN EP based on the enumeration speed */ -+ switch (dsts.b.enumspd) { -+ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: -+ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: -+ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: -+ diepctl.b.mps = DWC_DEP0CTL_MPS_64; -+ break; -+ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: -+ diepctl.b.mps = DWC_DEP0CTL_MPS_8; -+ break; -+ } -+ -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); -+ -+ /* Enable OUT EP for receive */ -+ if (core_if->snpsid <= OTG_CORE_REV_2_94a) { -+ doepctl.b.epena = 1; -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); -+ } -+#ifdef VERBOSE -+ DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n", -+ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl)); -+ DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n", -+ DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl)); -+#endif -+ dctl.b.cgnpinnak = 1; -+ -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); -+ DWC_DEBUGPL(DBG_PCDV, "dctl=%0x\n", -+ DWC_READ_REG32(&dev_if->dev_global_regs->dctl)); -+ -+} -+ -+/** -+ * This function activates an EP. The Device EP control register for -+ * the EP is configured as defined in the ep structure. Note: This -+ * function is not used for EP0. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to activate. -+ */ -+void dwc_otg_ep_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ depctl_data_t depctl; -+ volatile uint32_t *addr; -+ daint_data_t daintmsk = {.d32 = 0 }; -+ dcfg_data_t dcfg; -+ uint8_t i; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num, -+ (ep->is_in ? "IN" : "OUT")); -+ -+#ifdef DWC_UTE_PER_IO -+ ep->xiso_frame_num = 0xFFFFFFFF; -+ ep->xiso_active_xfers = 0; -+ ep->xiso_queued_xfers = 0; -+#endif -+ /* Read DEPCTLn register */ -+ if (ep->is_in == 1) { -+ addr = &dev_if->in_ep_regs[ep->num]->diepctl; -+ daintmsk.ep.in = 1 << ep->num; -+ } else { -+ addr = &dev_if->out_ep_regs[ep->num]->doepctl; -+ daintmsk.ep.out = 1 << ep->num; -+ } -+ -+ /* If the EP is already active don't change the EP Control -+ * register. */ -+ depctl.d32 = DWC_READ_REG32(addr); -+ if (!depctl.b.usbactep) { -+ depctl.b.mps = ep->maxpacket; -+ depctl.b.eptype = ep->type; -+ depctl.b.txfnum = ep->tx_fifo_num; -+ -+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ depctl.b.setd0pid = 1; // ??? -+ } else { -+ depctl.b.setd0pid = 1; -+ } -+ depctl.b.usbactep = 1; -+ -+ /* Update nextep_seq array and EPMSCNT in DCFG*/ -+ if (!(depctl.b.eptype & 1) && (ep->is_in == 1)) { // NP IN EP -+ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { -+ if (core_if->nextep_seq[i] == core_if->first_in_nextep_seq) -+ break; -+ } -+ core_if->nextep_seq[i] = ep->num; -+ core_if->nextep_seq[ep->num] = core_if->first_in_nextep_seq; -+ depctl.b.nextep = core_if->nextep_seq[ep->num]; -+ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); -+ dcfg.b.epmscnt++; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", -+ __func__, core_if->first_in_nextep_seq); -+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { -+ DWC_DEBUGPL(DBG_PCDV, "%2d\n", -+ core_if->nextep_seq[i]); -+ } -+ -+ } -+ -+ -+ DWC_WRITE_REG32(addr, depctl.d32); -+ DWC_DEBUGPL(DBG_PCDV, "DEPCTL=%08x\n", DWC_READ_REG32(addr)); -+ } -+ -+ /* Enable the Interrupt for this EP */ -+ if (core_if->multiproc_int_enable) { -+ if (ep->is_in == 1) { -+ diepmsk_data_t diepmsk = {.d32 = 0 }; -+ diepmsk.b.xfercompl = 1; -+ diepmsk.b.timeout = 1; -+ diepmsk.b.epdisabled = 1; -+ diepmsk.b.ahberr = 1; -+ diepmsk.b.intknepmis = 1; -+ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) -+ diepmsk.b.intknepmis = 0; -+ diepmsk.b.txfifoundrn = 1; //????? -+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ diepmsk.b.nak = 1; -+ } -+ -+ -+ -+/* -+ if (core_if->dma_desc_enable) { -+ diepmsk.b.bna = 1; -+ } -+*/ -+/* -+ if (core_if->dma_enable) { -+ doepmsk.b.nak = 1; -+ } -+*/ -+ DWC_WRITE_REG32(&dev_if->dev_global_regs-> -+ diepeachintmsk[ep->num], diepmsk.d32); -+ -+ } else { -+ doepmsk_data_t doepmsk = {.d32 = 0 }; -+ doepmsk.b.xfercompl = 1; -+ doepmsk.b.ahberr = 1; -+ doepmsk.b.epdisabled = 1; -+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) -+ doepmsk.b.outtknepdis = 1; -+ -+/* -+ -+ if (core_if->dma_desc_enable) { -+ doepmsk.b.bna = 1; -+ } -+*/ -+/* -+ doepmsk.b.babble = 1; -+ doepmsk.b.nyet = 1; -+ doepmsk.b.nak = 1; -+*/ -+ DWC_WRITE_REG32(&dev_if->dev_global_regs-> -+ doepeachintmsk[ep->num], doepmsk.d32); -+ } -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->deachintmsk, -+ 0, daintmsk.d32); -+ } else { -+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ if (ep->is_in) { -+ diepmsk_data_t diepmsk = {.d32 = 0 }; -+ diepmsk.b.nak = 1; -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32); -+ } else { -+ doepmsk_data_t doepmsk = {.d32 = 0 }; -+ doepmsk.b.outtknepdis = 1; -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->doepmsk, 0, doepmsk.d32); -+ } -+ } -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->daintmsk, -+ 0, daintmsk.d32); -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, "DAINTMSK=%0x\n", -+ DWC_READ_REG32(&dev_if->dev_global_regs->daintmsk)); -+ -+ ep->stall_clear_flag = 0; -+ -+ return; -+} -+ -+/** -+ * This function deactivates an EP. This is done by clearing the USB Active -+ * EP bit in the Device EP control register. Note: This function is not used -+ * for EP0. EP0 cannot be deactivated. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to deactivate. -+ */ -+void dwc_otg_ep_deactivate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ depctl_data_t depctl = {.d32 = 0 }; -+ volatile uint32_t *addr; -+ daint_data_t daintmsk = {.d32 = 0 }; -+ dcfg_data_t dcfg; -+ uint8_t i = 0; -+ -+#ifdef DWC_UTE_PER_IO -+ ep->xiso_frame_num = 0xFFFFFFFF; -+ ep->xiso_active_xfers = 0; -+ ep->xiso_queued_xfers = 0; -+#endif -+ -+ /* Read DEPCTLn register */ -+ if (ep->is_in == 1) { -+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; -+ daintmsk.ep.in = 1 << ep->num; -+ } else { -+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; -+ daintmsk.ep.out = 1 << ep->num; -+ } -+ -+ depctl.d32 = DWC_READ_REG32(addr); -+ -+ depctl.b.usbactep = 0; -+ -+ /* Update nextep_seq array and EPMSCNT in DCFG*/ -+ if (!(depctl.b.eptype & 1) && ep->is_in == 1) { // NP EP IN -+ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { -+ if (core_if->nextep_seq[i] == ep->num) -+ break; -+ } -+ core_if->nextep_seq[i] = core_if->nextep_seq[ep->num]; -+ if (core_if->first_in_nextep_seq == ep->num) -+ core_if->first_in_nextep_seq = i; -+ core_if->nextep_seq[ep->num] = 0xff; -+ depctl.b.nextep = 0; -+ dcfg.d32 = -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); -+ dcfg.b.epmscnt--; -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, -+ dcfg.d32); -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", -+ __func__, core_if->first_in_nextep_seq); -+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { -+ DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]); -+ } -+ } -+ -+ if (ep->is_in == 1) -+ depctl.b.txfnum = 0; -+ -+ if (core_if->dma_desc_enable) -+ depctl.b.epdis = 1; -+ -+ DWC_WRITE_REG32(addr, depctl.d32); -+ depctl.d32 = DWC_READ_REG32(addr); -+ if (core_if->dma_enable && ep->type == DWC_OTG_EP_TYPE_ISOC -+ && depctl.b.epena) { -+ depctl_data_t depctl = {.d32 = 0}; -+ if (ep->is_in) { -+ diepint_data_t diepint = {.d32 = 0}; -+ -+ depctl.b.snak = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> -+ diepctl, depctl.d32); -+ do { -+ dwc_udelay(10); -+ diepint.d32 = -+ DWC_READ_REG32(&core_if-> -+ dev_if->in_ep_regs[ep->num]-> -+ diepint); -+ } while (!diepint.b.inepnakeff); -+ diepint.b.inepnakeff = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> -+ diepint, diepint.d32); -+ depctl.d32 = 0; -+ depctl.b.epdis = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> -+ diepctl, depctl.d32); -+ do { -+ dwc_udelay(10); -+ diepint.d32 = -+ DWC_READ_REG32(&core_if-> -+ dev_if->in_ep_regs[ep->num]-> -+ diepint); -+ } while (!diepint.b.epdisabled); -+ diepint.b.epdisabled = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> -+ diepint, diepint.d32); -+ } else { -+ dctl_data_t dctl = {.d32 = 0}; -+ gintmsk_data_t gintsts = {.d32 = 0}; -+ doepint_data_t doepint = {.d32 = 0}; -+ dctl.b.sgoutnak = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ dctl, 0, dctl.d32); -+ do { -+ dwc_udelay(10); -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ } while (!gintsts.b.goutnakeff); -+ gintsts.d32 = 0; -+ gintsts.b.goutnakeff = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ depctl.d32 = 0; -+ depctl.b.epdis = 1; -+ depctl.b.snak = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepctl, depctl.d32); -+ do -+ { -+ dwc_udelay(10); -+ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[ep->num]->doepint); -+ } while (!doepint.b.epdisabled); -+ -+ doepint.b.epdisabled = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepint, doepint.d32); -+ -+ dctl.d32 = 0; -+ dctl.b.cgoutnak = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); -+ } -+ } -+ -+ /* Disable the Interrupt for this EP */ -+ if (core_if->multiproc_int_enable) { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->deachintmsk, -+ daintmsk.d32, 0); -+ -+ if (ep->is_in == 1) { -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> -+ diepeachintmsk[ep->num], 0); -+ } else { -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> -+ doepeachintmsk[ep->num], 0); -+ } -+ } else { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->daintmsk, -+ daintmsk.d32, 0); -+ } -+ -+} -+ -+/** -+ * This function initializes dma descriptor chain. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ */ -+static void init_dma_desc_chain(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ uint32_t offset; -+ uint32_t xfer_est; -+ int i; -+ unsigned maxxfer_local, total_len; -+ -+ if (!ep->is_in && ep->type == DWC_OTG_EP_TYPE_INTR && -+ (ep->maxpacket%4)) { -+ maxxfer_local = ep->maxpacket; -+ total_len = ep->xfer_len; -+ } else { -+ maxxfer_local = ep->maxxfer; -+ total_len = ep->total_len; -+ } -+ -+ ep->desc_cnt = (total_len / maxxfer_local) + -+ ((total_len % maxxfer_local) ? 1 : 0); -+ -+ if (!ep->desc_cnt) -+ ep->desc_cnt = 1; -+ -+ if (ep->desc_cnt > MAX_DMA_DESC_CNT) -+ ep->desc_cnt = MAX_DMA_DESC_CNT; -+ -+ dma_desc = ep->desc_addr; -+ if (maxxfer_local == ep->maxpacket) { -+ if ((total_len % maxxfer_local) && -+ (total_len/maxxfer_local < MAX_DMA_DESC_CNT)) { -+ xfer_est = (ep->desc_cnt - 1) * maxxfer_local + -+ (total_len % maxxfer_local); -+ } else -+ xfer_est = ep->desc_cnt * maxxfer_local; -+ } else -+ xfer_est = total_len; -+ offset = 0; -+ for (i = 0; i < ep->desc_cnt; ++i) { -+ /** DMA Descriptor Setup */ -+ if (xfer_est > maxxfer_local) { -+ dma_desc->status.b.bs = BS_HOST_BUSY; -+ dma_desc->status.b.l = 0; -+ dma_desc->status.b.ioc = 0; -+ dma_desc->status.b.sp = 0; -+ dma_desc->status.b.bytes = maxxfer_local; -+ dma_desc->buf = ep->dma_addr + offset; -+ dma_desc->status.b.sts = 0; -+ dma_desc->status.b.bs = BS_HOST_READY; -+ -+ xfer_est -= maxxfer_local; -+ offset += maxxfer_local; -+ } else { -+ dma_desc->status.b.bs = BS_HOST_BUSY; -+ dma_desc->status.b.l = 1; -+ dma_desc->status.b.ioc = 1; -+ if (ep->is_in) { -+ dma_desc->status.b.sp = -+ (xfer_est % -+ ep->maxpacket) ? 1 : ((ep-> -+ sent_zlp) ? 1 : 0); -+ dma_desc->status.b.bytes = xfer_est; -+ } else { -+ if (maxxfer_local == ep->maxpacket) -+ dma_desc->status.b.bytes = xfer_est; -+ else -+ dma_desc->status.b.bytes = -+ xfer_est + ((4 - (xfer_est & 0x3)) & 0x3); -+ } -+ -+ dma_desc->buf = ep->dma_addr + offset; -+ dma_desc->status.b.sts = 0; -+ dma_desc->status.b.bs = BS_HOST_READY; -+ } -+ dma_desc++; -+ } -+} -+/** -+ * This function is called when to write ISOC data into appropriate dedicated -+ * periodic FIFO. -+ */ -+static int32_t write_isoc_tx_fifo(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep) -+{ -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ dwc_otg_dev_in_ep_regs_t *ep_regs; -+ dtxfsts_data_t txstatus = {.d32 = 0 }; -+ uint32_t len = 0; -+ int epnum = dwc_ep->num; -+ int dwords; -+ -+ DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum); -+ -+ ep_regs = core_if->dev_if->in_ep_regs[epnum]; -+ -+ len = dwc_ep->xfer_len - dwc_ep->xfer_count; -+ -+ if (len > dwc_ep->maxpacket) { -+ len = dwc_ep->maxpacket; -+ } -+ -+ dwords = (len + 3) / 4; -+ -+ /* While there is space in the queue and space in the FIFO and -+ * More data to tranfer, Write packets to the Tx FIFO */ -+ txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); -+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32); -+ -+ while (txstatus.b.txfspcavail > dwords && -+ dwc_ep->xfer_count < dwc_ep->xfer_len && dwc_ep->xfer_len != 0) { -+ /* Write the FIFO */ -+ dwc_otg_ep_write_packet(core_if, dwc_ep, 0); -+ -+ len = dwc_ep->xfer_len - dwc_ep->xfer_count; -+ if (len > dwc_ep->maxpacket) { -+ len = dwc_ep->maxpacket; -+ } -+ -+ dwords = (len + 3) / 4; -+ txstatus.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); -+ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum, -+ txstatus.d32); -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, -+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts)); -+ -+ return 1; -+} -+/** -+ * This function does the setup for a data transfer for an EP and -+ * starts the transfer. For an IN transfer, the packets will be -+ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, -+ * the packets are unloaded from the Rx FIFO in the ISR. the ISR. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ */ -+ -+void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ depctl_data_t depctl; -+ deptsiz_data_t deptsiz; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); -+ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " -+ "xfer_buff=%p start_xfer_buff=%p, total_len = %d\n", -+ ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len, -+ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff, -+ ep->total_len); -+ /* IN endpoint */ -+ if (ep->is_in == 1) { -+ dwc_otg_dev_in_ep_regs_t *in_regs = -+ core_if->dev_if->in_ep_regs[ep->num]; -+ -+ gnptxsts_data_t gtxstatus; -+ -+ gtxstatus.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); -+ -+ if (core_if->en_multiple_tx_fifo == 0 -+ && gtxstatus.b.nptxqspcavail == 0 && !core_if->dma_enable) { -+#ifdef DEBUG -+ DWC_PRINTF("TX Queue Full (0x%0x)\n", gtxstatus.d32); -+#endif -+ return; -+ } -+ -+ depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl)); -+ deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz)); -+ -+ if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT) -+ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? -+ ep->maxxfer : (ep->total_len - ep->xfer_len); -+ else -+ ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len - ep->xfer_len)) ? -+ MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len); -+ -+ -+ /* Zero Length Packet? */ -+ if ((ep->xfer_len - ep->xfer_count) == 0) { -+ deptsiz.b.xfersize = 0; -+ deptsiz.b.pktcnt = 1; -+ } else { -+ /* Program the transfer size and packet count -+ * as follows: xfersize = N * maxpacket + -+ * short_packet pktcnt = N + (short_packet -+ * exist ? 1 : 0) -+ */ -+ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; -+ deptsiz.b.pktcnt = -+ (ep->xfer_len - ep->xfer_count - 1 + -+ ep->maxpacket) / ep->maxpacket; -+ if (deptsiz.b.pktcnt > MAX_PKT_CNT) { -+ deptsiz.b.pktcnt = MAX_PKT_CNT; -+ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; -+ } -+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) -+ deptsiz.b.mc = deptsiz.b.pktcnt; -+ } -+ -+ /* Write the DMA register */ -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable == 0) { -+ if (ep->type != DWC_OTG_EP_TYPE_ISOC) -+ deptsiz.b.mc = 1; -+ DWC_WRITE_REG32(&in_regs->dieptsiz, -+ deptsiz.d32); -+ DWC_WRITE_REG32(&(in_regs->diepdma), -+ (uint32_t) ep->dma_addr); -+ } else { -+#ifdef DWC_UTE_CFI -+ /* The descriptor chain should be already initialized by now */ -+ if (ep->buff_mode != BM_STANDARD) { -+ DWC_WRITE_REG32(&in_regs->diepdma, -+ ep->descs_dma_addr); -+ } else { -+#endif -+ init_dma_desc_chain(core_if, ep); -+ /** DIEPDMAn Register write */ -+ DWC_WRITE_REG32(&in_regs->diepdma, -+ ep->dma_desc_addr); -+#ifdef DWC_UTE_CFI -+ } -+#endif -+ } -+ } else { -+ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); -+ if (ep->type != DWC_OTG_EP_TYPE_ISOC) { -+ /** -+ * Enable the Non-Periodic Tx FIFO empty interrupt, -+ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, -+ * the data will be written into the fifo by the ISR. -+ */ -+ if (core_if->en_multiple_tx_fifo == 0) { -+ intr_mask.b.nptxfempty = 1; -+ DWC_MODIFY_REG32 -+ (&core_if->core_global_regs->gintmsk, -+ intr_mask.d32, intr_mask.d32); -+ } else { -+ /* Enable the Tx FIFO Empty Interrupt for this EP */ -+ if (ep->xfer_len > 0) { -+ uint32_t fifoemptymsk = 0; -+ fifoemptymsk = 1 << ep->num; -+ DWC_MODIFY_REG32 -+ (&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, -+ 0, fifoemptymsk); -+ -+ } -+ } -+ } else { -+ write_isoc_tx_fifo(core_if, ep); -+ } -+ } -+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) -+ depctl.b.nextep = core_if->nextep_seq[ep->num]; -+ -+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ dsts_data_t dsts = {.d32 = 0}; -+ if (ep->bInterval == 1) { -+ dsts.d32 = -+ DWC_READ_REG32(&core_if->dev_if-> -+ dev_global_regs->dsts); -+ ep->frame_num = dsts.b.soffn + ep->bInterval; -+ if (ep->frame_num > 0x3FFF) { -+ ep->frm_overrun = 1; -+ ep->frame_num &= 0x3FFF; -+ } else -+ ep->frm_overrun = 0; -+ if (ep->frame_num & 0x1) { -+ depctl.b.setd1pid = 1; -+ } else { -+ depctl.b.setd0pid = 1; -+ } -+ } -+ } -+ /* EP enable, IN data in FIFO */ -+ depctl.b.cnak = 1; -+ depctl.b.epena = 1; -+ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); -+ -+ } else { -+ /* OUT endpoint */ -+ dwc_otg_dev_out_ep_regs_t *out_regs = -+ core_if->dev_if->out_ep_regs[ep->num]; -+ -+ depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl)); -+ deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz)); -+ -+ if (!core_if->dma_desc_enable) { -+ if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT) -+ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? -+ ep->maxxfer : (ep->total_len - ep->xfer_len); -+ else -+ ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len -+ - ep->xfer_len)) ? MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len); -+ } -+ -+ /* Program the transfer size and packet count as follows: -+ * -+ * pktcnt = N -+ * xfersize = N * maxpacket -+ */ -+ if ((ep->xfer_len - ep->xfer_count) == 0) { -+ /* Zero Length Packet */ -+ deptsiz.b.xfersize = ep->maxpacket; -+ deptsiz.b.pktcnt = 1; -+ } else { -+ deptsiz.b.pktcnt = -+ (ep->xfer_len - ep->xfer_count + -+ (ep->maxpacket - 1)) / ep->maxpacket; -+ if (deptsiz.b.pktcnt > MAX_PKT_CNT) { -+ deptsiz.b.pktcnt = MAX_PKT_CNT; -+ } -+ if (!core_if->dma_desc_enable) { -+ ep->xfer_len = -+ deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count; -+ } -+ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n", -+ ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt); -+ -+ if (core_if->dma_enable) { -+ if (!core_if->dma_desc_enable) { -+ DWC_WRITE_REG32(&out_regs->doeptsiz, -+ deptsiz.d32); -+ -+ DWC_WRITE_REG32(&(out_regs->doepdma), -+ (uint32_t) ep->dma_addr); -+ } else { -+#ifdef DWC_UTE_CFI -+ /* The descriptor chain should be already initialized by now */ -+ if (ep->buff_mode != BM_STANDARD) { -+ DWC_WRITE_REG32(&out_regs->doepdma, -+ ep->descs_dma_addr); -+ } else { -+#endif -+ /** This is used for interrupt out transfers*/ -+ if (!ep->xfer_len) -+ ep->xfer_len = ep->total_len; -+ init_dma_desc_chain(core_if, ep); -+ -+ if (core_if->core_params->dev_out_nak) { -+ if (ep->type == DWC_OTG_EP_TYPE_BULK) { -+ deptsiz.b.pktcnt = (ep->total_len + -+ (ep->maxpacket - 1)) / ep->maxpacket; -+ deptsiz.b.xfersize = ep->total_len; -+ /* Remember initial value of doeptsiz */ -+ core_if->start_doeptsiz_val[ep->num] = deptsiz.d32; -+ DWC_WRITE_REG32(&out_regs->doeptsiz, -+ deptsiz.d32); -+ } -+ } -+ /** DOEPDMAn Register write */ -+ DWC_WRITE_REG32(&out_regs->doepdma, -+ ep->dma_desc_addr); -+#ifdef DWC_UTE_CFI -+ } -+#endif -+ } -+ } else { -+ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); -+ } -+ -+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ dsts_data_t dsts = {.d32 = 0}; -+ if (ep->bInterval == 1) { -+ dsts.d32 = -+ DWC_READ_REG32(&core_if->dev_if-> -+ dev_global_regs->dsts); -+ ep->frame_num = dsts.b.soffn + ep->bInterval; -+ if (ep->frame_num > 0x3FFF) { -+ ep->frm_overrun = 1; -+ ep->frame_num &= 0x3FFF; -+ } else -+ ep->frm_overrun = 0; -+ -+ if (ep->frame_num & 0x1) { -+ depctl.b.setd1pid = 1; -+ } else { -+ depctl.b.setd0pid = 1; -+ } -+ } -+ } -+ -+ /* EP enable */ -+ depctl.b.cnak = 1; -+ depctl.b.epena = 1; -+ -+ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); -+ -+ DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n", -+ DWC_READ_REG32(&out_regs->doepctl), -+ DWC_READ_REG32(&out_regs->doeptsiz)); -+ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n", -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs-> -+ daintmsk), -+ DWC_READ_REG32(&core_if->core_global_regs-> -+ gintmsk)); -+ -+ /* Timer is scheduling only for out bulk transfers for -+ * "Device DDMA OUT NAK Enhancement" feature to inform user -+ * about received data payload in case of timeout -+ */ -+ if (core_if->core_params->dev_out_nak) { -+ if (ep->type == DWC_OTG_EP_TYPE_BULK) { -+ core_if->ep_xfer_info[ep->num].core_if = core_if; -+ core_if->ep_xfer_info[ep->num].ep = ep; -+ core_if->ep_xfer_info[ep->num].state = 1; -+ -+ /* Start a timer for this transfer. */ -+ DWC_TIMER_SCHEDULE(core_if->ep_xfer_timer[ep->num], 10000); -+ } -+ } -+ } -+} -+ -+/** -+ * This function setup a zero length transfer in Buffer DMA and -+ * Slave modes for usb requests with zero field set -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ * -+ */ -+void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ -+ depctl_data_t depctl; -+ deptsiz_data_t deptsiz; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); -+ DWC_PRINTF("zero length transfer is called\n"); -+ -+ /* IN endpoint */ -+ if (ep->is_in == 1) { -+ dwc_otg_dev_in_ep_regs_t *in_regs = -+ core_if->dev_if->in_ep_regs[ep->num]; -+ -+ depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl)); -+ deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz)); -+ -+ deptsiz.b.xfersize = 0; -+ deptsiz.b.pktcnt = 1; -+ -+ /* Write the DMA register */ -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable == 0) { -+ deptsiz.b.mc = 1; -+ DWC_WRITE_REG32(&in_regs->dieptsiz, -+ deptsiz.d32); -+ DWC_WRITE_REG32(&(in_regs->diepdma), -+ (uint32_t) ep->dma_addr); -+ } -+ } else { -+ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); -+ /** -+ * Enable the Non-Periodic Tx FIFO empty interrupt, -+ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, -+ * the data will be written into the fifo by the ISR. -+ */ -+ if (core_if->en_multiple_tx_fifo == 0) { -+ intr_mask.b.nptxfempty = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs->gintmsk, -+ intr_mask.d32, intr_mask.d32); -+ } else { -+ /* Enable the Tx FIFO Empty Interrupt for this EP */ -+ if (ep->xfer_len > 0) { -+ uint32_t fifoemptymsk = 0; -+ fifoemptymsk = 1 << ep->num; -+ DWC_MODIFY_REG32(&core_if-> -+ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, -+ 0, fifoemptymsk); -+ } -+ } -+ } -+ -+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) -+ depctl.b.nextep = core_if->nextep_seq[ep->num]; -+ /* EP enable, IN data in FIFO */ -+ depctl.b.cnak = 1; -+ depctl.b.epena = 1; -+ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); -+ -+ } else { -+ /* OUT endpoint */ -+ dwc_otg_dev_out_ep_regs_t *out_regs = -+ core_if->dev_if->out_ep_regs[ep->num]; -+ -+ depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl)); -+ deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz)); -+ -+ /* Zero Length Packet */ -+ deptsiz.b.xfersize = ep->maxpacket; -+ deptsiz.b.pktcnt = 1; -+ -+ if (core_if->dma_enable) { -+ if (!core_if->dma_desc_enable) { -+ DWC_WRITE_REG32(&out_regs->doeptsiz, -+ deptsiz.d32); -+ -+ DWC_WRITE_REG32(&(out_regs->doepdma), -+ (uint32_t) ep->dma_addr); -+ } -+ } else { -+ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); -+ } -+ -+ /* EP enable */ -+ depctl.b.cnak = 1; -+ depctl.b.epena = 1; -+ -+ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); -+ -+ } -+} -+ -+/** -+ * This function does the setup for a data transfer for EP0 and starts -+ * the transfer. For an IN transfer, the packets will be loaded into -+ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are -+ * unloaded from the Rx FIFO in the ISR. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP0 data. -+ */ -+void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ depctl_data_t depctl; -+ deptsiz0_data_t deptsiz; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ -+ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " -+ "xfer_buff=%p start_xfer_buff=%p \n", -+ ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len, -+ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff); -+ -+ ep->total_len = ep->xfer_len; -+ -+ /* IN endpoint */ -+ if (ep->is_in == 1) { -+ dwc_otg_dev_in_ep_regs_t *in_regs = -+ core_if->dev_if->in_ep_regs[0]; -+ -+ gnptxsts_data_t gtxstatus; -+ -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { -+ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl); -+ if (depctl.b.epena) -+ return; -+ } -+ -+ gtxstatus.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); -+ -+ /* If dedicated FIFO every time flush fifo before enable ep*/ -+ if (core_if->en_multiple_tx_fifo && core_if->snpsid >= OTG_CORE_REV_3_00a) -+ dwc_otg_flush_tx_fifo(core_if, ep->tx_fifo_num); -+ -+ if (core_if->en_multiple_tx_fifo == 0 -+ && gtxstatus.b.nptxqspcavail == 0 -+ && !core_if->dma_enable) { -+#ifdef DEBUG -+ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); -+ DWC_DEBUGPL(DBG_PCD, "DIEPCTL0=%0x\n", -+ DWC_READ_REG32(&in_regs->diepctl)); -+ DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n", -+ deptsiz.d32, -+ deptsiz.b.xfersize, deptsiz.b.pktcnt); -+ DWC_PRINTF("TX Queue or FIFO Full (0x%0x)\n", -+ gtxstatus.d32); -+#endif -+ return; -+ } -+ -+ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl); -+ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); -+ -+ /* Zero Length Packet? */ -+ if (ep->xfer_len == 0) { -+ deptsiz.b.xfersize = 0; -+ deptsiz.b.pktcnt = 1; -+ } else { -+ /* Program the transfer size and packet count -+ * as follows: xfersize = N * maxpacket + -+ * short_packet pktcnt = N + (short_packet -+ * exist ? 1 : 0) -+ */ -+ if (ep->xfer_len > ep->maxpacket) { -+ ep->xfer_len = ep->maxpacket; -+ deptsiz.b.xfersize = ep->maxpacket; -+ } else { -+ deptsiz.b.xfersize = ep->xfer_len; -+ } -+ deptsiz.b.pktcnt = 1; -+ -+ } -+ DWC_DEBUGPL(DBG_PCDV, -+ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", -+ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, -+ deptsiz.d32); -+ -+ /* Write the DMA register */ -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable == 0) { -+ DWC_WRITE_REG32(&in_regs->dieptsiz, -+ deptsiz.d32); -+ -+ DWC_WRITE_REG32(&(in_regs->diepdma), -+ (uint32_t) ep->dma_addr); -+ } else { -+ dma_desc = core_if->dev_if->in_desc_addr; -+ -+ /** DMA Descriptor Setup */ -+ dma_desc->status.b.bs = BS_HOST_BUSY; -+ dma_desc->status.b.l = 1; -+ dma_desc->status.b.ioc = 1; -+ dma_desc->status.b.sp = -+ (ep->xfer_len == ep->maxpacket) ? 0 : 1; -+ dma_desc->status.b.bytes = ep->xfer_len; -+ dma_desc->buf = ep->dma_addr; -+ dma_desc->status.b.sts = 0; -+ dma_desc->status.b.bs = BS_HOST_READY; -+ -+ /** DIEPDMA0 Register write */ -+ DWC_WRITE_REG32(&in_regs->diepdma, -+ core_if-> -+ dev_if->dma_in_desc_addr); -+ } -+ } else { -+ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); -+ } -+ -+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) -+ depctl.b.nextep = core_if->nextep_seq[ep->num]; -+ /* EP enable, IN data in FIFO */ -+ depctl.b.cnak = 1; -+ depctl.b.epena = 1; -+ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); -+ -+ /** -+ * Enable the Non-Periodic Tx FIFO empty interrupt, the -+ * data will be written into the fifo by the ISR. -+ */ -+ if (!core_if->dma_enable) { -+ if (core_if->en_multiple_tx_fifo == 0) { -+ intr_mask.b.nptxfempty = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs->gintmsk, -+ intr_mask.d32, intr_mask.d32); -+ } else { -+ /* Enable the Tx FIFO Empty Interrupt for this EP */ -+ if (ep->xfer_len > 0) { -+ uint32_t fifoemptymsk = 0; -+ fifoemptymsk |= 1 << ep->num; -+ DWC_MODIFY_REG32(&core_if-> -+ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, -+ 0, fifoemptymsk); -+ } -+ } -+ } -+ } else { -+ /* OUT endpoint */ -+ dwc_otg_dev_out_ep_regs_t *out_regs = -+ core_if->dev_if->out_ep_regs[0]; -+ -+ depctl.d32 = DWC_READ_REG32(&out_regs->doepctl); -+ deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz); -+ -+ /* Program the transfer size and packet count as follows: -+ * xfersize = N * (maxpacket + 4 - (maxpacket % 4)) -+ * pktcnt = N */ -+ /* Zero Length Packet */ -+ deptsiz.b.xfersize = ep->maxpacket; -+ deptsiz.b.pktcnt = 1; -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) -+ deptsiz.b.supcnt = 3; -+ -+ DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n", -+ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt); -+ -+ if (core_if->dma_enable) { -+ if (!core_if->dma_desc_enable) { -+ DWC_WRITE_REG32(&out_regs->doeptsiz, -+ deptsiz.d32); -+ -+ DWC_WRITE_REG32(&(out_regs->doepdma), -+ (uint32_t) ep->dma_addr); -+ } else { -+ dma_desc = core_if->dev_if->out_desc_addr; -+ -+ /** DMA Descriptor Setup */ -+ dma_desc->status.b.bs = BS_HOST_BUSY; -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { -+ dma_desc->status.b.mtrf = 0; -+ dma_desc->status.b.sr = 0; -+ } -+ dma_desc->status.b.l = 1; -+ dma_desc->status.b.ioc = 1; -+ dma_desc->status.b.bytes = ep->maxpacket; -+ dma_desc->buf = ep->dma_addr; -+ dma_desc->status.b.sts = 0; -+ dma_desc->status.b.bs = BS_HOST_READY; -+ -+ /** DOEPDMA0 Register write */ -+ DWC_WRITE_REG32(&out_regs->doepdma, -+ core_if->dev_if-> -+ dma_out_desc_addr); -+ } -+ } else { -+ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); -+ } -+ -+ /* EP enable */ -+ depctl.b.cnak = 1; -+ depctl.b.epena = 1; -+ DWC_WRITE_REG32(&(out_regs->doepctl), depctl.d32); -+ } -+} -+ -+/** -+ * This function continues control IN transfers started by -+ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a -+ * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one -+ * bit for the packet count. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP0 data. -+ */ -+void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ depctl_data_t depctl; -+ deptsiz0_data_t deptsiz; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ -+ if (ep->is_in == 1) { -+ dwc_otg_dev_in_ep_regs_t *in_regs = -+ core_if->dev_if->in_ep_regs[0]; -+ gnptxsts_data_t tx_status = {.d32 = 0 }; -+ -+ tx_status.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); -+ /** @todo Should there be check for room in the Tx -+ * Status Queue. If not remove the code above this comment. */ -+ -+ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl); -+ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); -+ -+ /* Program the transfer size and packet count -+ * as follows: xfersize = N * maxpacket + -+ * short_packet pktcnt = N + (short_packet -+ * exist ? 1 : 0) -+ */ -+ -+ if (core_if->dma_desc_enable == 0) { -+ deptsiz.b.xfersize = -+ (ep->total_len - ep->xfer_count) > -+ ep->maxpacket ? ep->maxpacket : (ep->total_len - -+ ep->xfer_count); -+ deptsiz.b.pktcnt = 1; -+ if (core_if->dma_enable == 0) { -+ ep->xfer_len += deptsiz.b.xfersize; -+ } else { -+ ep->xfer_len = deptsiz.b.xfersize; -+ } -+ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); -+ } else { -+ ep->xfer_len = -+ (ep->total_len - ep->xfer_count) > -+ ep->maxpacket ? ep->maxpacket : (ep->total_len - -+ ep->xfer_count); -+ -+ dma_desc = core_if->dev_if->in_desc_addr; -+ -+ /** DMA Descriptor Setup */ -+ dma_desc->status.b.bs = BS_HOST_BUSY; -+ dma_desc->status.b.l = 1; -+ dma_desc->status.b.ioc = 1; -+ dma_desc->status.b.sp = -+ (ep->xfer_len == ep->maxpacket) ? 0 : 1; -+ dma_desc->status.b.bytes = ep->xfer_len; -+ dma_desc->buf = ep->dma_addr; -+ dma_desc->status.b.sts = 0; -+ dma_desc->status.b.bs = BS_HOST_READY; -+ -+ /** DIEPDMA0 Register write */ -+ DWC_WRITE_REG32(&in_regs->diepdma, -+ core_if->dev_if->dma_in_desc_addr); -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", -+ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, -+ deptsiz.d32); -+ -+ /* Write the DMA register */ -+ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { -+ if (core_if->dma_desc_enable == 0) -+ DWC_WRITE_REG32(&(in_regs->diepdma), -+ (uint32_t) ep->dma_addr); -+ } -+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) -+ depctl.b.nextep = core_if->nextep_seq[ep->num]; -+ /* EP enable, IN data in FIFO */ -+ depctl.b.cnak = 1; -+ depctl.b.epena = 1; -+ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); -+ -+ /** -+ * Enable the Non-Periodic Tx FIFO empty interrupt, the -+ * data will be written into the fifo by the ISR. -+ */ -+ if (!core_if->dma_enable) { -+ if (core_if->en_multiple_tx_fifo == 0) { -+ /* First clear it from GINTSTS */ -+ intr_mask.b.nptxfempty = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs->gintmsk, -+ intr_mask.d32, intr_mask.d32); -+ -+ } else { -+ /* Enable the Tx FIFO Empty Interrupt for this EP */ -+ if (ep->xfer_len > 0) { -+ uint32_t fifoemptymsk = 0; -+ fifoemptymsk |= 1 << ep->num; -+ DWC_MODIFY_REG32(&core_if-> -+ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, -+ 0, fifoemptymsk); -+ } -+ } -+ } -+ } else { -+ dwc_otg_dev_out_ep_regs_t *out_regs = -+ core_if->dev_if->out_ep_regs[0]; -+ -+ depctl.d32 = DWC_READ_REG32(&out_regs->doepctl); -+ deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz); -+ -+ /* Program the transfer size and packet count -+ * as follows: xfersize = N * maxpacket + -+ * short_packet pktcnt = N + (short_packet -+ * exist ? 1 : 0) -+ */ -+ deptsiz.b.xfersize = ep->maxpacket; -+ deptsiz.b.pktcnt = 1; -+ -+ if (core_if->dma_desc_enable == 0) { -+ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); -+ } else { -+ dma_desc = core_if->dev_if->out_desc_addr; -+ -+ /** DMA Descriptor Setup */ -+ dma_desc->status.b.bs = BS_HOST_BUSY; -+ dma_desc->status.b.l = 1; -+ dma_desc->status.b.ioc = 1; -+ dma_desc->status.b.bytes = ep->maxpacket; -+ dma_desc->buf = ep->dma_addr; -+ dma_desc->status.b.sts = 0; -+ dma_desc->status.b.bs = BS_HOST_READY; -+ -+ /** DOEPDMA0 Register write */ -+ DWC_WRITE_REG32(&out_regs->doepdma, -+ core_if->dev_if->dma_out_desc_addr); -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", -+ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, -+ deptsiz.d32); -+ -+ /* Write the DMA register */ -+ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { -+ if (core_if->dma_desc_enable == 0) -+ DWC_WRITE_REG32(&(out_regs->doepdma), -+ (uint32_t) ep->dma_addr); -+ -+ } -+ -+ /* EP enable, IN data in FIFO */ -+ depctl.b.cnak = 1; -+ depctl.b.epena = 1; -+ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); -+ -+ } -+} -+ -+#ifdef DEBUG -+void dump_msg(const u8 * buf, unsigned int length) -+{ -+ unsigned int start, num, i; -+ char line[52], *p; -+ -+ if (length >= 512) -+ return; -+ start = 0; -+ while (length > 0) { -+ num = length < 16u ? length : 16u; -+ p = line; -+ for (i = 0; i < num; ++i) { -+ if (i == 8) -+ *p++ = ' '; -+ DWC_SPRINTF(p, " %02x", buf[i]); -+ p += 3; -+ } -+ *p = 0; -+ DWC_PRINTF("%6x: %s\n", start, line); -+ buf += num; -+ start += num; -+ length -= num; -+ } -+} -+#else -+static inline void dump_msg(const u8 * buf, unsigned int length) -+{ -+} -+#endif -+ -+/** -+ * This function writes a packet into the Tx FIFO associated with the -+ * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For -+ * periodic EPs the periodic Tx FIFO associated with the EP is written -+ * with all packets for the next micro-frame. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to write packet for. -+ * @param dma Indicates if DMA is being used. -+ */ -+void dwc_otg_ep_write_packet(dwc_otg_core_if_t * core_if, dwc_ep_t * ep, -+ int dma) -+{ -+ /** -+ * The buffer is padded to DWORD on a per packet basis in -+ * slave/dma mode if the MPS is not DWORD aligned. The last -+ * packet, if short, is also padded to a multiple of DWORD. -+ * -+ * ep->xfer_buff always starts DWORD aligned in memory and is a -+ * multiple of DWORD in length -+ * -+ * ep->xfer_len can be any number of bytes -+ * -+ * ep->xfer_count is a multiple of ep->maxpacket until the last -+ * packet -+ * -+ * FIFO access is DWORD */ -+ -+ uint32_t i; -+ uint32_t byte_count; -+ uint32_t dword_count; -+ uint32_t *fifo; -+ uint32_t *data_buff = (uint32_t *) ep->xfer_buff; -+ -+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, -+ ep); -+ if (ep->xfer_count >= ep->xfer_len) { -+ DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num); -+ return; -+ } -+ -+ /* Find the byte length of the packet either short packet or MPS */ -+ if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) { -+ byte_count = ep->xfer_len - ep->xfer_count; -+ } else { -+ byte_count = ep->maxpacket; -+ } -+ -+ /* Find the DWORD length, padded by extra bytes as neccessary if MPS -+ * is not a multiple of DWORD */ -+ dword_count = (byte_count + 3) / 4; -+ -+#ifdef VERBOSE -+ dump_msg(ep->xfer_buff, byte_count); -+#endif -+ -+ /**@todo NGS Where are the Periodic Tx FIFO addresses -+ * intialized? What should this be? */ -+ -+ fifo = core_if->data_fifo[ep->num]; -+ -+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", -+ fifo, data_buff, *data_buff, byte_count); -+ -+ if (!dma) { -+ for (i = 0; i < dword_count; i++, data_buff++) { -+ DWC_WRITE_REG32(fifo, *data_buff); -+ } -+ } -+ -+ ep->xfer_count += byte_count; -+ ep->xfer_buff += byte_count; -+ ep->dma_addr += byte_count; -+} -+ -+/** -+ * Set the EP STALL. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to set the stall on. -+ */ -+void dwc_otg_ep_set_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ depctl_data_t depctl; -+ volatile uint32_t *depctl_addr; -+ -+ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, -+ (ep->is_in ? "IN" : "OUT")); -+ -+ if (ep->is_in == 1) { -+ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); -+ depctl.d32 = DWC_READ_REG32(depctl_addr); -+ -+ /* set the disable and stall bits */ -+ if (depctl.b.epena) { -+ depctl.b.epdis = 1; -+ } -+ depctl.b.stall = 1; -+ DWC_WRITE_REG32(depctl_addr, depctl.d32); -+ } else { -+ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); -+ depctl.d32 = DWC_READ_REG32(depctl_addr); -+ -+ /* set the stall bit */ -+ depctl.b.stall = 1; -+ DWC_WRITE_REG32(depctl_addr, depctl.d32); -+ } -+ -+ DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr)); -+ -+ return; -+} -+ -+/** -+ * Clear the EP STALL. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to clear stall from. -+ */ -+void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ depctl_data_t depctl; -+ volatile uint32_t *depctl_addr; -+ -+ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, -+ (ep->is_in ? "IN" : "OUT")); -+ -+ if (ep->is_in == 1) { -+ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); -+ } else { -+ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); -+ } -+ -+ depctl.d32 = DWC_READ_REG32(depctl_addr); -+ -+ /* clear the stall bits */ -+ depctl.b.stall = 0; -+ -+ /* -+ * USB Spec 9.4.5: For endpoints using data toggle, regardless -+ * of whether an endpoint has the Halt feature set, a -+ * ClearFeature(ENDPOINT_HALT) request always results in the -+ * data toggle being reinitialized to DATA0. -+ */ -+ if (ep->type == DWC_OTG_EP_TYPE_INTR || -+ ep->type == DWC_OTG_EP_TYPE_BULK) { -+ depctl.b.setd0pid = 1; /* DATA0 */ -+ } -+ -+ DWC_WRITE_REG32(depctl_addr, depctl.d32); -+ DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr)); -+ return; -+} -+ -+/** -+ * This function reads a packet from the Rx FIFO into the destination -+ * buffer. To read SETUP data use dwc_otg_read_setup_packet. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param dest Destination buffer for the packet. -+ * @param bytes Number of bytes to copy to the destination. -+ */ -+void dwc_otg_read_packet(dwc_otg_core_if_t * core_if, -+ uint8_t * dest, uint16_t bytes) -+{ -+ int i; -+ int word_count = (bytes + 3) / 4; -+ -+ volatile uint32_t *fifo = core_if->data_fifo[0]; -+ uint32_t *data_buff = (uint32_t *) dest; -+ -+ /** -+ * @todo Account for the case where _dest is not dword aligned. This -+ * requires reading data from the FIFO into a uint32_t temp buffer, -+ * then moving it into the data buffer. -+ */ -+ -+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__, -+ core_if, dest, bytes); -+ -+ for (i = 0; i < word_count; i++, data_buff++) { -+ *data_buff = DWC_READ_REG32(fifo); -+ } -+ -+ return; -+} -+ -+/** -+ * This functions reads the device registers and prints them -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * core_if) -+{ -+ int i; -+ volatile uint32_t *addr; -+ -+ DWC_PRINTF("Device Global Registers\n"); -+ addr = &core_if->dev_if->dev_global_regs->dcfg; -+ DWC_PRINTF("DCFG @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->dev_global_regs->dctl; -+ DWC_PRINTF("DCTL @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->dev_global_regs->dsts; -+ DWC_PRINTF("DSTS @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->dev_global_regs->diepmsk; -+ DWC_PRINTF("DIEPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->dev_global_regs->doepmsk; -+ DWC_PRINTF("DOEPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->dev_global_regs->daint; -+ DWC_PRINTF("DAINT @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->dev_global_regs->daintmsk; -+ DWC_PRINTF("DAINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->dev_global_regs->dtknqr1; -+ DWC_PRINTF("DTKNQR1 @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ if (core_if->hwcfg2.b.dev_token_q_depth > 6) { -+ addr = &core_if->dev_if->dev_global_regs->dtknqr2; -+ DWC_PRINTF("DTKNQR2 @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ } -+ -+ addr = &core_if->dev_if->dev_global_regs->dvbusdis; -+ DWC_PRINTF("DVBUSID @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ -+ addr = &core_if->dev_if->dev_global_regs->dvbuspulse; -+ DWC_PRINTF("DVBUSPULSE @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ -+ addr = &core_if->dev_if->dev_global_regs->dtknqr3_dthrctl; -+ DWC_PRINTF("DTKNQR3_DTHRCTL @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ -+ if (core_if->hwcfg2.b.dev_token_q_depth > 22) { -+ addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; -+ DWC_PRINTF("DTKNQR4 @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ } -+ -+ addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; -+ DWC_PRINTF("FIFOEMPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ -+ if (core_if->hwcfg2.b.multi_proc_int) { -+ -+ addr = &core_if->dev_if->dev_global_regs->deachint; -+ DWC_PRINTF("DEACHINT @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->dev_global_regs->deachintmsk; -+ DWC_PRINTF("DEACHINTMSK @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ -+ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { -+ addr = -+ &core_if->dev_if-> -+ dev_global_regs->diepeachintmsk[i]; -+ DWC_PRINTF("DIEPEACHINTMSK[%d] @0x%08lX : 0x%08X\n", -+ i, (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ } -+ -+ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { -+ addr = -+ &core_if->dev_if-> -+ dev_global_regs->doepeachintmsk[i]; -+ DWC_PRINTF("DOEPEACHINTMSK[%d] @0x%08lX : 0x%08X\n", -+ i, (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ } -+ } -+ -+ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { -+ DWC_PRINTF("Device IN EP %d Registers\n", i); -+ addr = &core_if->dev_if->in_ep_regs[i]->diepctl; -+ DWC_PRINTF("DIEPCTL @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->in_ep_regs[i]->diepint; -+ DWC_PRINTF("DIEPINT @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->in_ep_regs[i]->dieptsiz; -+ DWC_PRINTF("DIETSIZ @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->in_ep_regs[i]->diepdma; -+ DWC_PRINTF("DIEPDMA @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->in_ep_regs[i]->dtxfsts; -+ DWC_PRINTF("DTXFSTS @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->in_ep_regs[i]->diepdmab; -+ DWC_PRINTF("DIEPDMAB @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, 0 /*DWC_READ_REG32(addr) */ ); -+ } -+ -+ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { -+ DWC_PRINTF("Device OUT EP %d Registers\n", i); -+ addr = &core_if->dev_if->out_ep_regs[i]->doepctl; -+ DWC_PRINTF("DOEPCTL @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->out_ep_regs[i]->doepint; -+ DWC_PRINTF("DOEPINT @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->out_ep_regs[i]->doeptsiz; -+ DWC_PRINTF("DOETSIZ @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->out_ep_regs[i]->doepdma; -+ DWC_PRINTF("DOEPDMA @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ if (core_if->dma_enable) { /* Don't access this register in SLAVE mode */ -+ addr = &core_if->dev_if->out_ep_regs[i]->doepdmab; -+ DWC_PRINTF("DOEPDMAB @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ } -+ -+ } -+} -+ -+/** -+ * This functions reads the SPRAM and prints its content -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+void dwc_otg_dump_spram(dwc_otg_core_if_t * core_if) -+{ -+ volatile uint8_t *addr, *start_addr, *end_addr; -+ -+ DWC_PRINTF("SPRAM Data:\n"); -+ start_addr = (void *)core_if->core_global_regs; -+ DWC_PRINTF("Base Address: 0x%8lX\n", (unsigned long)start_addr); -+ start_addr += 0x00028000; -+ end_addr = (void *)core_if->core_global_regs; -+ end_addr += 0x000280e0; -+ -+ for (addr = start_addr; addr < end_addr; addr += 16) { -+ DWC_PRINTF -+ ("0x%8lX:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", -+ (unsigned long)addr, addr[0], addr[1], addr[2], addr[3], -+ addr[4], addr[5], addr[6], addr[7], addr[8], addr[9], -+ addr[10], addr[11], addr[12], addr[13], addr[14], addr[15] -+ ); -+ } -+ -+ return; -+} -+ -+/** -+ * This function reads the host registers and prints them -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+void dwc_otg_dump_host_registers(dwc_otg_core_if_t * core_if) -+{ -+ int i; -+ volatile uint32_t *addr; -+ -+ DWC_PRINTF("Host Global Registers\n"); -+ addr = &core_if->host_if->host_global_regs->hcfg; -+ DWC_PRINTF("HCFG @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->host_global_regs->hfir; -+ DWC_PRINTF("HFIR @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->host_global_regs->hfnum; -+ DWC_PRINTF("HFNUM @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->host_global_regs->hptxsts; -+ DWC_PRINTF("HPTXSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->host_global_regs->haint; -+ DWC_PRINTF("HAINT @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->host_global_regs->haintmsk; -+ DWC_PRINTF("HAINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ if (core_if->dma_desc_enable) { -+ addr = &core_if->host_if->host_global_regs->hflbaddr; -+ DWC_PRINTF("HFLBADDR @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ } -+ -+ addr = core_if->host_if->hprt0; -+ DWC_PRINTF("HPRT0 @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ -+ for (i = 0; i < core_if->core_params->host_channels; i++) { -+ DWC_PRINTF("Host Channel %d Specific Registers\n", i); -+ addr = &core_if->host_if->hc_regs[i]->hcchar; -+ DWC_PRINTF("HCCHAR @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->hc_regs[i]->hcsplt; -+ DWC_PRINTF("HCSPLT @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->hc_regs[i]->hcint; -+ DWC_PRINTF("HCINT @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->hc_regs[i]->hcintmsk; -+ DWC_PRINTF("HCINTMSK @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->hc_regs[i]->hctsiz; -+ DWC_PRINTF("HCTSIZ @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->hc_regs[i]->hcdma; -+ DWC_PRINTF("HCDMA @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ if (core_if->dma_desc_enable) { -+ addr = &core_if->host_if->hc_regs[i]->hcdmab; -+ DWC_PRINTF("HCDMAB @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ } -+ -+ } -+ return; -+} -+ -+/** -+ * This function reads the core global registers and prints them -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+void dwc_otg_dump_global_registers(dwc_otg_core_if_t * core_if) -+{ -+ int i, ep_num; -+ volatile uint32_t *addr; -+ char *txfsiz; -+ -+ DWC_PRINTF("Core Global Registers\n"); -+ addr = &core_if->core_global_regs->gotgctl; -+ DWC_PRINTF("GOTGCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gotgint; -+ DWC_PRINTF("GOTGINT @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gahbcfg; -+ DWC_PRINTF("GAHBCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gusbcfg; -+ DWC_PRINTF("GUSBCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->grstctl; -+ DWC_PRINTF("GRSTCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gintsts; -+ DWC_PRINTF("GINTSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gintmsk; -+ DWC_PRINTF("GINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->grxstsr; -+ DWC_PRINTF("GRXSTSR @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->grxfsiz; -+ DWC_PRINTF("GRXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gnptxfsiz; -+ DWC_PRINTF("GNPTXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gnptxsts; -+ DWC_PRINTF("GNPTXSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gi2cctl; -+ DWC_PRINTF("GI2CCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gpvndctl; -+ DWC_PRINTF("GPVNDCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->ggpio; -+ DWC_PRINTF("GGPIO @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->guid; -+ DWC_PRINTF("GUID @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gsnpsid; -+ DWC_PRINTF("GSNPSID @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->ghwcfg1; -+ DWC_PRINTF("GHWCFG1 @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->ghwcfg2; -+ DWC_PRINTF("GHWCFG2 @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->ghwcfg3; -+ DWC_PRINTF("GHWCFG3 @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->ghwcfg4; -+ DWC_PRINTF("GHWCFG4 @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->glpmcfg; -+ DWC_PRINTF("GLPMCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gpwrdn; -+ DWC_PRINTF("GPWRDN @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gdfifocfg; -+ DWC_PRINTF("GDFIFOCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->adpctl; -+ DWC_PRINTF("ADPCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ dwc_otg_adp_read_reg(core_if)); -+ addr = &core_if->core_global_regs->hptxfsiz; -+ DWC_PRINTF("HPTXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ -+ if (core_if->en_multiple_tx_fifo == 0) { -+ ep_num = core_if->hwcfg4.b.num_dev_perio_in_ep; -+ txfsiz = "DPTXFSIZ"; -+ } else { -+ ep_num = core_if->hwcfg4.b.num_in_eps; -+ txfsiz = "DIENPTXF"; -+ } -+ for (i = 0; i < ep_num; i++) { -+ addr = &core_if->core_global_regs->dtxfsiz[i]; -+ DWC_PRINTF("%s[%d] @0x%08lX : 0x%08X\n", txfsiz, i + 1, -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ } -+ addr = core_if->pcgcctl; -+ DWC_PRINTF("PCGCCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+} -+ -+/** -+ * Flush a Tx FIFO. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param num Tx FIFO to flush. -+ */ -+void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * core_if, const int num) -+{ -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ volatile grstctl_t greset = {.d32 = 0 }; -+ int count = 0; -+ -+ DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "Flush Tx FIFO %d\n", num); -+ -+ greset.b.txfflsh = 1; -+ greset.b.txfnum = num; -+ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); -+ -+ do { -+ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); -+ if (++count > 10000) { -+ DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n", -+ __func__, greset.d32, -+ DWC_READ_REG32(&global_regs->gnptxsts)); -+ break; -+ } -+ dwc_udelay(1); -+ } while (greset.b.txfflsh == 1); -+ -+ /* Wait for 3 PHY Clocks */ -+ dwc_udelay(1); -+} -+ -+/** -+ * Flush Rx FIFO. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ volatile grstctl_t greset = {.d32 = 0 }; -+ int count = 0; -+ -+ DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "%s\n", __func__); -+ /* -+ * -+ */ -+ greset.b.rxfflsh = 1; -+ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); -+ -+ do { -+ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); -+ if (++count > 10000) { -+ DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, -+ greset.d32); -+ break; -+ } -+ dwc_udelay(1); -+ } while (greset.b.rxfflsh == 1); -+ -+ /* Wait for 3 PHY Clocks */ -+ dwc_udelay(1); -+} -+ -+/** -+ * Do core a soft reset of the core. Be careful with this because it -+ * resets all the internal state machines of the core. -+ */ -+void dwc_otg_core_reset(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ volatile grstctl_t greset = {.d32 = 0 }; -+ int count = 0; -+ -+ DWC_DEBUGPL(DBG_CILV, "%s\n", __func__); -+ /* Wait for AHB master IDLE state. */ -+ do { -+ dwc_udelay(10); -+ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); -+ if (++count > 100000) { -+ DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__, -+ greset.d32); -+ return; -+ } -+ } -+ while (greset.b.ahbidle == 0); -+ -+ /* Core Soft Reset */ -+ count = 0; -+ greset.b.csftrst = 1; -+ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); -+ do { -+ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); -+ if (++count > 10000) { -+ DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", -+ __func__, greset.d32); -+ break; -+ } -+ dwc_udelay(1); -+ } -+ while (greset.b.csftrst == 1); -+ -+ /* Wait for 3 PHY Clocks */ -+ dwc_mdelay(100); -+} -+ -+uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if) -+{ -+ return (dwc_otg_mode(_core_if) != DWC_HOST_MODE); -+} -+ -+uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if) -+{ -+ return (dwc_otg_mode(_core_if) == DWC_HOST_MODE); -+} -+ -+/** -+ * Register HCD callbacks. The callbacks are used to start and stop -+ * the HCD for interrupt processing. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param cb the HCD callback structure. -+ * @param p pointer to be passed to callback function (usb_hcd*). -+ */ -+void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * core_if, -+ dwc_otg_cil_callbacks_t * cb, void *p) -+{ -+ core_if->hcd_cb = cb; -+ cb->p = p; -+} -+ -+/** -+ * Register PCD callbacks. The callbacks are used to start and stop -+ * the PCD for interrupt processing. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param cb the PCD callback structure. -+ * @param p pointer to be passed to callback function (pcd*). -+ */ -+void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * core_if, -+ dwc_otg_cil_callbacks_t * cb, void *p) -+{ -+ core_if->pcd_cb = cb; -+ cb->p = p; -+} -+ -+#ifdef DWC_EN_ISOC -+ -+/** -+ * This function writes isoc data per 1 (micro)frame into tx fifo -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ * -+ */ -+void write_isoc_frame_data(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ dwc_otg_dev_in_ep_regs_t *ep_regs; -+ dtxfsts_data_t txstatus = {.d32 = 0 }; -+ uint32_t len = 0; -+ uint32_t dwords; -+ -+ ep->xfer_len = ep->data_per_frame; -+ ep->xfer_count = 0; -+ -+ ep_regs = core_if->dev_if->in_ep_regs[ep->num]; -+ -+ len = ep->xfer_len - ep->xfer_count; -+ -+ if (len > ep->maxpacket) { -+ len = ep->maxpacket; -+ } -+ -+ dwords = (len + 3) / 4; -+ -+ /* While there is space in the queue and space in the FIFO and -+ * More data to tranfer, Write packets to the Tx FIFO */ -+ txstatus.d32 = -+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts); -+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32); -+ -+ while (txstatus.b.txfspcavail > dwords && -+ ep->xfer_count < ep->xfer_len && ep->xfer_len != 0) { -+ /* Write the FIFO */ -+ dwc_otg_ep_write_packet(core_if, ep, 0); -+ -+ len = ep->xfer_len - ep->xfer_count; -+ if (len > ep->maxpacket) { -+ len = ep->maxpacket; -+ } -+ -+ dwords = (len + 3) / 4; -+ txstatus.d32 = -+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> -+ dtxfsts); -+ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", ep->num, -+ txstatus.d32); -+ } -+} -+ -+/** -+ * This function initializes a descriptor chain for Isochronous transfer -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ * -+ */ -+void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * ep) -+{ -+ deptsiz_data_t deptsiz = {.d32 = 0 }; -+ depctl_data_t depctl = {.d32 = 0 }; -+ dsts_data_t dsts = {.d32 = 0 }; -+ volatile uint32_t *addr; -+ -+ if (ep->is_in) { -+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; -+ } else { -+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; -+ } -+ -+ ep->xfer_len = ep->data_per_frame; -+ ep->xfer_count = 0; -+ ep->xfer_buff = ep->cur_pkt_addr; -+ ep->dma_addr = ep->cur_pkt_dma_addr; -+ -+ if (ep->is_in) { -+ /* Program the transfer size and packet count -+ * as follows: xfersize = N * maxpacket + -+ * short_packet pktcnt = N + (short_packet -+ * exist ? 1 : 0) -+ */ -+ deptsiz.b.xfersize = ep->xfer_len; -+ deptsiz.b.pktcnt = -+ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; -+ deptsiz.b.mc = deptsiz.b.pktcnt; -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, -+ deptsiz.d32); -+ -+ /* Write the DMA register */ -+ if (core_if->dma_enable) { -+ DWC_WRITE_REG32(& -+ (core_if->dev_if->in_ep_regs[ep->num]-> -+ diepdma), (uint32_t) ep->dma_addr); -+ } -+ } else { -+ deptsiz.b.pktcnt = -+ (ep->xfer_len + (ep->maxpacket - 1)) / ep->maxpacket; -+ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; -+ -+ DWC_WRITE_REG32(&core_if->dev_if-> -+ out_ep_regs[ep->num]->doeptsiz, deptsiz.d32); -+ -+ if (core_if->dma_enable) { -+ DWC_WRITE_REG32(& -+ (core_if->dev_if-> -+ out_ep_regs[ep->num]->doepdma), -+ (uint32_t) ep->dma_addr); -+ } -+ } -+ -+ /** Enable endpoint, clear nak */ -+ -+ depctl.d32 = 0; -+ if (ep->bInterval == 1) { -+ dsts.d32 = -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ ep->next_frame = dsts.b.soffn + ep->bInterval; -+ -+ if (ep->next_frame & 0x1) { -+ depctl.b.setd1pid = 1; -+ } else { -+ depctl.b.setd0pid = 1; -+ } -+ } else { -+ ep->next_frame += ep->bInterval; -+ -+ if (ep->next_frame & 0x1) { -+ depctl.b.setd1pid = 1; -+ } else { -+ depctl.b.setd0pid = 1; -+ } -+ } -+ depctl.b.epena = 1; -+ depctl.b.cnak = 1; -+ -+ DWC_MODIFY_REG32(addr, 0, depctl.d32); -+ depctl.d32 = DWC_READ_REG32(addr); -+ -+ if (ep->is_in && core_if->dma_enable == 0) { -+ write_isoc_frame_data(core_if, ep); -+ } -+ -+} -+#endif /* DWC_EN_ISOC */ -+ -+static void dwc_otg_set_uninitialized(int32_t * p, int size) -+{ -+ int i; -+ for (i = 0; i < size; i++) { -+ p[i] = -1; -+ } -+} -+ -+static int dwc_otg_param_initialized(int32_t val) -+{ -+ return val != -1; -+} -+ -+static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if) -+{ -+ int i; -+ core_if->core_params = DWC_ALLOC(sizeof(*core_if->core_params)); -+ if (!core_if->core_params) { -+ return -DWC_E_NO_MEMORY; -+ } -+ dwc_otg_set_uninitialized((int32_t *) core_if->core_params, -+ sizeof(*core_if->core_params) / -+ sizeof(int32_t)); -+ DWC_PRINTF("Setting default values for core params\n"); -+ dwc_otg_set_param_otg_cap(core_if, dwc_param_otg_cap_default); -+ dwc_otg_set_param_dma_enable(core_if, dwc_param_dma_enable_default); -+ dwc_otg_set_param_dma_desc_enable(core_if, -+ dwc_param_dma_desc_enable_default); -+ dwc_otg_set_param_opt(core_if, dwc_param_opt_default); -+ dwc_otg_set_param_dma_burst_size(core_if, -+ dwc_param_dma_burst_size_default); -+ dwc_otg_set_param_host_support_fs_ls_low_power(core_if, -+ dwc_param_host_support_fs_ls_low_power_default); -+ dwc_otg_set_param_enable_dynamic_fifo(core_if, -+ dwc_param_enable_dynamic_fifo_default); -+ dwc_otg_set_param_data_fifo_size(core_if, -+ dwc_param_data_fifo_size_default); -+ dwc_otg_set_param_dev_rx_fifo_size(core_if, -+ dwc_param_dev_rx_fifo_size_default); -+ dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if, -+ dwc_param_dev_nperio_tx_fifo_size_default); -+ dwc_otg_set_param_host_rx_fifo_size(core_if, -+ dwc_param_host_rx_fifo_size_default); -+ dwc_otg_set_param_host_nperio_tx_fifo_size(core_if, -+ dwc_param_host_nperio_tx_fifo_size_default); -+ dwc_otg_set_param_host_perio_tx_fifo_size(core_if, -+ dwc_param_host_perio_tx_fifo_size_default); -+ dwc_otg_set_param_max_transfer_size(core_if, -+ dwc_param_max_transfer_size_default); -+ dwc_otg_set_param_max_packet_count(core_if, -+ dwc_param_max_packet_count_default); -+ dwc_otg_set_param_host_channels(core_if, -+ dwc_param_host_channels_default); -+ dwc_otg_set_param_dev_endpoints(core_if, -+ dwc_param_dev_endpoints_default); -+ dwc_otg_set_param_phy_type(core_if, dwc_param_phy_type_default); -+ dwc_otg_set_param_speed(core_if, dwc_param_speed_default); -+ dwc_otg_set_param_host_ls_low_power_phy_clk(core_if, -+ dwc_param_host_ls_low_power_phy_clk_default); -+ dwc_otg_set_param_phy_ulpi_ddr(core_if, dwc_param_phy_ulpi_ddr_default); -+ dwc_otg_set_param_phy_ulpi_ext_vbus(core_if, -+ dwc_param_phy_ulpi_ext_vbus_default); -+ dwc_otg_set_param_phy_utmi_width(core_if, -+ dwc_param_phy_utmi_width_default); -+ dwc_otg_set_param_ts_dline(core_if, dwc_param_ts_dline_default); -+ dwc_otg_set_param_i2c_enable(core_if, dwc_param_i2c_enable_default); -+ dwc_otg_set_param_ulpi_fs_ls(core_if, dwc_param_ulpi_fs_ls_default); -+ dwc_otg_set_param_en_multiple_tx_fifo(core_if, -+ dwc_param_en_multiple_tx_fifo_default); -+ for (i = 0; i < 15; i++) { -+ dwc_otg_set_param_dev_perio_tx_fifo_size(core_if, -+ dwc_param_dev_perio_tx_fifo_size_default, -+ i); -+ } -+ -+ for (i = 0; i < 15; i++) { -+ dwc_otg_set_param_dev_tx_fifo_size(core_if, -+ dwc_param_dev_tx_fifo_size_default, -+ i); -+ } -+ dwc_otg_set_param_thr_ctl(core_if, dwc_param_thr_ctl_default); -+ dwc_otg_set_param_mpi_enable(core_if, dwc_param_mpi_enable_default); -+ dwc_otg_set_param_pti_enable(core_if, dwc_param_pti_enable_default); -+ dwc_otg_set_param_lpm_enable(core_if, dwc_param_lpm_enable_default); -+ dwc_otg_set_param_ic_usb_cap(core_if, dwc_param_ic_usb_cap_default); -+ dwc_otg_set_param_tx_thr_length(core_if, -+ dwc_param_tx_thr_length_default); -+ dwc_otg_set_param_rx_thr_length(core_if, -+ dwc_param_rx_thr_length_default); -+ dwc_otg_set_param_ahb_thr_ratio(core_if, -+ dwc_param_ahb_thr_ratio_default); -+ dwc_otg_set_param_power_down(core_if, dwc_param_power_down_default); -+ dwc_otg_set_param_reload_ctl(core_if, dwc_param_reload_ctl_default); -+ dwc_otg_set_param_dev_out_nak(core_if, dwc_param_dev_out_nak_default); -+ dwc_otg_set_param_cont_on_bna(core_if, dwc_param_cont_on_bna_default); -+ dwc_otg_set_param_ahb_single(core_if, dwc_param_ahb_single_default); -+ dwc_otg_set_param_otg_ver(core_if, dwc_param_otg_ver_default); -+ dwc_otg_set_param_adp_enable(core_if, dwc_param_adp_enable_default); -+ DWC_PRINTF("Finished setting default values for core params\n"); -+ -+ return 0; -+} -+ -+uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->dma_enable; -+} -+ -+/* Checks if the parameter is outside of its valid range of values */ -+#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \ -+ (((_param_) < (_low_)) || \ -+ ((_param_) > (_high_))) -+ -+/* Parameter access functions */ -+int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int valid; -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 2)) { -+ DWC_WARN("Wrong value for otg_cap parameter\n"); -+ DWC_WARN("otg_cap parameter must be 0,1 or 2\n"); -+ retval = -DWC_E_INVALID; -+ goto out; -+ } -+ -+ valid = 1; -+ switch (val) { -+ case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE: -+ if (core_if->hwcfg2.b.op_mode != -+ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) -+ valid = 0; -+ break; -+ case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE: -+ if ((core_if->hwcfg2.b.op_mode != -+ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) -+ && (core_if->hwcfg2.b.op_mode != -+ DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) -+ && (core_if->hwcfg2.b.op_mode != -+ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) -+ && (core_if->hwcfg2.b.op_mode != -+ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) { -+ valid = 0; -+ } -+ break; -+ case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE: -+ /* always valid */ -+ break; -+ } -+ if (!valid) { -+ if (dwc_otg_param_initialized(core_if->core_params->otg_cap)) { -+ DWC_ERROR -+ ("%d invalid for otg_cap paremter. Check HW configuration.\n", -+ val); -+ } -+ val = -+ (((core_if->hwcfg2.b.op_mode == -+ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) -+ || (core_if->hwcfg2.b.op_mode == -+ DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) -+ || (core_if->hwcfg2.b.op_mode == -+ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) -+ || (core_if->hwcfg2.b.op_mode == -+ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ? -+ DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE : -+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->otg_cap = val; -+out: -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->otg_cap; -+} -+ -+int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong value for opt parameter\n"); -+ return -DWC_E_INVALID; -+ } -+ core_if->core_params->opt = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->opt; -+} -+ -+int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong value for dma enable\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == 1) && (core_if->hwcfg2.b.architecture == 0)) { -+ if (dwc_otg_param_initialized(core_if->core_params->dma_enable)) { -+ DWC_ERROR -+ ("%d invalid for dma_enable paremter. Check HW configuration.\n", -+ val); -+ } -+ val = 0; -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->dma_enable = val; -+ if (val == 0) { -+ dwc_otg_set_param_dma_desc_enable(core_if, 0); -+ } -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->dma_enable; -+} -+ -+int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong value for dma_enable\n"); -+ DWC_WARN("dma_desc_enable must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == 1) -+ && ((dwc_otg_get_param_dma_enable(core_if) == 0) -+ || (core_if->hwcfg4.b.desc_dma == 0))) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->dma_desc_enable)) { -+ DWC_ERROR -+ ("%d invalid for dma_desc_enable paremter. Check HW configuration.\n", -+ val); -+ } -+ val = 0; -+ retval = -DWC_E_INVALID; -+ } -+ core_if->core_params->dma_desc_enable = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->dma_desc_enable; -+} -+ -+int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong value for host_support_fs_low_power\n"); -+ DWC_WARN("host_support_fs_low_power must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ core_if->core_params->host_support_fs_ls_low_power = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * -+ core_if) -+{ -+ return core_if->core_params->host_support_fs_ls_low_power; -+} -+ -+int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong value for enable_dynamic_fifo\n"); -+ DWC_WARN("enable_dynamic_fifo must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == 1) && (core_if->hwcfg2.b.dynamic_fifo == 0)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->enable_dynamic_fifo)) { -+ DWC_ERROR -+ ("%d invalid for enable_dynamic_fifo paremter. Check HW configuration.\n", -+ val); -+ } -+ val = 0; -+ retval = -DWC_E_INVALID; -+ } -+ core_if->core_params->enable_dynamic_fifo = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->enable_dynamic_fifo; -+} -+ -+int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 32, 32768)) { -+ DWC_WARN("Wrong value for data_fifo_size\n"); -+ DWC_WARN("data_fifo_size must be 32-32768\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > core_if->hwcfg3.b.dfifo_depth) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->data_fifo_size)) { -+ DWC_ERROR -+ ("%d invalid for data_fifo_size parameter. Check HW configuration.\n", -+ val); -+ } -+ val = core_if->hwcfg3.b.dfifo_depth; -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->data_fifo_size = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->data_fifo_size; -+} -+ -+int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { -+ DWC_WARN("Wrong value for dev_rx_fifo_size\n"); -+ DWC_WARN("dev_rx_fifo_size must be 16-32768\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) { -+ if (dwc_otg_param_initialized(core_if->core_params->dev_rx_fifo_size)) { -+ DWC_WARN("%d invalid for dev_rx_fifo_size parameter\n", val); -+ } -+ val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->dev_rx_fifo_size = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->dev_rx_fifo_size; -+} -+ -+int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { -+ DWC_WARN("Wrong value for dev_nperio_tx_fifo\n"); -+ DWC_WARN("dev_nperio_tx_fifo must be 16-32768\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->dev_nperio_tx_fifo_size)) { -+ DWC_ERROR -+ ("%d invalid for dev_nperio_tx_fifo_size. Check HW configuration.\n", -+ val); -+ } -+ val = -+ (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> -+ 16); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->dev_nperio_tx_fifo_size = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->dev_nperio_tx_fifo_size; -+} -+ -+int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { -+ DWC_WARN("Wrong value for host_rx_fifo_size\n"); -+ DWC_WARN("host_rx_fifo_size must be 16-32768\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->host_rx_fifo_size)) { -+ DWC_ERROR -+ ("%d invalid for host_rx_fifo_size. Check HW configuration.\n", -+ val); -+ } -+ val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->host_rx_fifo_size = val; -+ return retval; -+ -+} -+ -+int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->host_rx_fifo_size; -+} -+ -+int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { -+ DWC_WARN("Wrong value for host_nperio_tx_fifo_size\n"); -+ DWC_WARN("host_nperio_tx_fifo_size must be 16-32768\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->host_nperio_tx_fifo_size)) { -+ DWC_ERROR -+ ("%d invalid for host_nperio_tx_fifo_size. Check HW configuration.\n", -+ val); -+ } -+ val = -+ (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> -+ 16); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->host_nperio_tx_fifo_size = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->host_nperio_tx_fifo_size; -+} -+ -+int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { -+ DWC_WARN("Wrong value for host_perio_tx_fifo_size\n"); -+ DWC_WARN("host_perio_tx_fifo_size must be 16-32768\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > ((core_if->hptxfsiz.d32) >> 16)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->host_perio_tx_fifo_size)) { -+ DWC_ERROR -+ ("%d invalid for host_perio_tx_fifo_size. Check HW configuration.\n", -+ val); -+ } -+ val = (core_if->hptxfsiz.d32) >> 16; -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->host_perio_tx_fifo_size = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->host_perio_tx_fifo_size; -+} -+ -+int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 2047, 524288)) { -+ DWC_WARN("Wrong value for max_transfer_size\n"); -+ DWC_WARN("max_transfer_size must be 2047-524288\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val >= (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->max_transfer_size)) { -+ DWC_ERROR -+ ("%d invalid for max_transfer_size. Check HW configuration.\n", -+ val); -+ } -+ val = -+ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 11)) - -+ 1); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->max_transfer_size = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->max_transfer_size; -+} -+ -+int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 15, 511)) { -+ DWC_WARN("Wrong value for max_packet_count\n"); -+ DWC_WARN("max_packet_count must be 15-511\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->max_packet_count)) { -+ DWC_ERROR -+ ("%d invalid for max_packet_count. Check HW configuration.\n", -+ val); -+ } -+ val = -+ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->max_packet_count = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->max_packet_count; -+} -+ -+int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 1, 16)) { -+ DWC_WARN("Wrong value for host_channels\n"); -+ DWC_WARN("host_channels must be 1-16\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > (core_if->hwcfg2.b.num_host_chan + 1)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->host_channels)) { -+ DWC_ERROR -+ ("%d invalid for host_channels. Check HW configurations.\n", -+ val); -+ } -+ val = (core_if->hwcfg2.b.num_host_chan + 1); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->host_channels = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->host_channels; -+} -+ -+int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 1, 15)) { -+ DWC_WARN("Wrong value for dev_endpoints\n"); -+ DWC_WARN("dev_endpoints must be 1-15\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > (core_if->hwcfg2.b.num_dev_ep)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->dev_endpoints)) { -+ DWC_ERROR -+ ("%d invalid for dev_endpoints. Check HW configurations.\n", -+ val); -+ } -+ val = core_if->hwcfg2.b.num_dev_ep; -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->dev_endpoints = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->dev_endpoints; -+} -+ -+int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ int valid = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 2)) { -+ DWC_WARN("Wrong value for phy_type\n"); -+ DWC_WARN("phy_type must be 0,1 or 2\n"); -+ return -DWC_E_INVALID; -+ } -+#ifndef NO_FS_PHY_HW_CHECKS -+ if ((val == DWC_PHY_TYPE_PARAM_UTMI) && -+ ((core_if->hwcfg2.b.hs_phy_type == 1) || -+ (core_if->hwcfg2.b.hs_phy_type == 3))) { -+ valid = 1; -+ } else if ((val == DWC_PHY_TYPE_PARAM_ULPI) && -+ ((core_if->hwcfg2.b.hs_phy_type == 2) || -+ (core_if->hwcfg2.b.hs_phy_type == 3))) { -+ valid = 1; -+ } else if ((val == DWC_PHY_TYPE_PARAM_FS) && -+ (core_if->hwcfg2.b.fs_phy_type == 1)) { -+ valid = 1; -+ } -+ if (!valid) { -+ if (dwc_otg_param_initialized(core_if->core_params->phy_type)) { -+ DWC_ERROR -+ ("%d invalid for phy_type. Check HW configurations.\n", -+ val); -+ } -+ if (core_if->hwcfg2.b.hs_phy_type) { -+ if ((core_if->hwcfg2.b.hs_phy_type == 3) || -+ (core_if->hwcfg2.b.hs_phy_type == 1)) { -+ val = DWC_PHY_TYPE_PARAM_UTMI; -+ } else { -+ val = DWC_PHY_TYPE_PARAM_ULPI; -+ } -+ } -+ retval = -DWC_E_INVALID; -+ } -+#endif -+ core_if->core_params->phy_type = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->phy_type; -+} -+ -+int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong value for speed parameter\n"); -+ DWC_WARN("max_speed parameter must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ if ((val == 0) -+ && dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS) { -+ if (dwc_otg_param_initialized(core_if->core_params->speed)) { -+ DWC_ERROR -+ ("%d invalid for speed paremter. Check HW configuration.\n", -+ val); -+ } -+ val = -+ (dwc_otg_get_param_phy_type(core_if) == -+ DWC_PHY_TYPE_PARAM_FS ? 1 : 0); -+ retval = -DWC_E_INVALID; -+ } -+ core_if->core_params->speed = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->speed; -+} -+ -+int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN -+ ("Wrong value for host_ls_low_power_phy_clk parameter\n"); -+ DWC_WARN("host_ls_low_power_phy_clk must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) -+ && (dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->host_ls_low_power_phy_clk)) { -+ DWC_ERROR -+ ("%d invalid for host_ls_low_power_phy_clk. Check HW configuration.\n", -+ val); -+ } -+ val = -+ (dwc_otg_get_param_phy_type(core_if) == -+ DWC_PHY_TYPE_PARAM_FS) ? -+ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : -+ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ; -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->host_ls_low_power_phy_clk = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->host_ls_low_power_phy_clk; -+} -+ -+int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong value for phy_ulpi_ddr\n"); -+ DWC_WARN("phy_upli_ddr must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->phy_ulpi_ddr = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->phy_ulpi_ddr; -+} -+ -+int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong valaue for phy_ulpi_ext_vbus\n"); -+ DWC_WARN("phy_ulpi_ext_vbus must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->phy_ulpi_ext_vbus = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->phy_ulpi_ext_vbus; -+} -+ -+int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 8, 8) && DWC_OTG_PARAM_TEST(val, 16, 16)) { -+ DWC_WARN("Wrong valaue for phy_utmi_width\n"); -+ DWC_WARN("phy_utmi_width must be 8 or 16\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->phy_utmi_width = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->phy_utmi_width; -+} -+ -+int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong valaue for ulpi_fs_ls\n"); -+ DWC_WARN("ulpi_fs_ls must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->ulpi_fs_ls = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->ulpi_fs_ls; -+} -+ -+int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong valaue for ts_dline\n"); -+ DWC_WARN("ts_dline must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->ts_dline = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->ts_dline; -+} -+ -+int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong valaue for i2c_enable\n"); -+ DWC_WARN("i2c_enable must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+#ifndef NO_FS_PHY_HW_CHECK -+ if (val == 1 && core_if->hwcfg3.b.i2c == 0) { -+ if (dwc_otg_param_initialized(core_if->core_params->i2c_enable)) { -+ DWC_ERROR -+ ("%d invalid for i2c_enable. Check HW configuration.\n", -+ val); -+ } -+ val = 0; -+ retval = -DWC_E_INVALID; -+ } -+#endif -+ -+ core_if->core_params->i2c_enable = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->i2c_enable; -+} -+ -+int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val, int fifo_num) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 4, 768)) { -+ DWC_WARN("Wrong value for dev_perio_tx_fifo_size\n"); -+ DWC_WARN("dev_perio_tx_fifo_size must be 4-768\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > -+ (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->dev_perio_tx_fifo_size[fifo_num])) { -+ DWC_ERROR -+ ("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", -+ val, fifo_num); -+ } -+ val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num])); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->dev_perio_tx_fifo_size[fifo_num] = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int fifo_num) -+{ -+ return core_if->core_params->dev_perio_tx_fifo_size[fifo_num]; -+} -+ -+int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong valaue for en_multiple_tx_fifo,\n"); -+ DWC_WARN("en_multiple_tx_fifo must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val == 1 && core_if->hwcfg4.b.ded_fifo_en == 0) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->en_multiple_tx_fifo)) { -+ DWC_ERROR -+ ("%d invalid for parameter en_multiple_tx_fifo. Check HW configuration.\n", -+ val); -+ } -+ val = 0; -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->en_multiple_tx_fifo = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->en_multiple_tx_fifo; -+} -+ -+int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val, -+ int fifo_num) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 4, 768)) { -+ DWC_WARN("Wrong value for dev_tx_fifo_size\n"); -+ DWC_WARN("dev_tx_fifo_size must be 4-768\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > -+ (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->dev_tx_fifo_size[fifo_num])) { -+ DWC_ERROR -+ ("`%d' invalid for parameter `dev_tx_fifo_size_%d'. Check HW configuration.\n", -+ val, fifo_num); -+ } -+ val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num])); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->dev_tx_fifo_size[fifo_num] = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int fifo_num) -+{ -+ return core_if->core_params->dev_tx_fifo_size[fifo_num]; -+} -+ -+int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 7)) { -+ DWC_WARN("Wrong value for thr_ctl\n"); -+ DWC_WARN("thr_ctl must be 0-7\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val != 0) && -+ (!dwc_otg_get_param_dma_enable(core_if) || -+ !core_if->hwcfg4.b.ded_fifo_en)) { -+ if (dwc_otg_param_initialized(core_if->core_params->thr_ctl)) { -+ DWC_ERROR -+ ("%d invalid for parameter thr_ctl. Check HW configuration.\n", -+ val); -+ } -+ val = 0; -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->thr_ctl = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_thr_ctl(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->thr_ctl; -+} -+ -+int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong value for lpm_enable\n"); -+ DWC_WARN("lpm_enable must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val && !core_if->hwcfg3.b.otg_lpm_en) { -+ if (dwc_otg_param_initialized(core_if->core_params->lpm_enable)) { -+ DWC_ERROR -+ ("%d invalid for parameter lpm_enable. Check HW configuration.\n", -+ val); -+ } -+ val = 0; -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->lpm_enable = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->lpm_enable; -+} -+ -+int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 8, 128)) { -+ DWC_WARN("Wrong valaue for tx_thr_length\n"); -+ DWC_WARN("tx_thr_length must be 8 - 128\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->tx_thr_length = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_tx_thr_length(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->tx_thr_length; -+} -+ -+int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 8, 128)) { -+ DWC_WARN("Wrong valaue for rx_thr_length\n"); -+ DWC_WARN("rx_thr_length must be 8 - 128\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->rx_thr_length = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_rx_thr_length(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->rx_thr_length; -+} -+ -+int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 1, 1) && -+ DWC_OTG_PARAM_TEST(val, 4, 4) && -+ DWC_OTG_PARAM_TEST(val, 8, 8) && -+ DWC_OTG_PARAM_TEST(val, 16, 16) && -+ DWC_OTG_PARAM_TEST(val, 32, 32) && -+ DWC_OTG_PARAM_TEST(val, 64, 64) && -+ DWC_OTG_PARAM_TEST(val, 128, 128) && -+ DWC_OTG_PARAM_TEST(val, 256, 256)) { -+ DWC_WARN("`%d' invalid for parameter `dma_burst_size'\n", val); -+ return -DWC_E_INVALID; -+ } -+ core_if->core_params->dma_burst_size = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->dma_burst_size; -+} -+ -+int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `pti_enable'\n", val); -+ return -DWC_E_INVALID; -+ } -+ if (val && (core_if->snpsid < OTG_CORE_REV_2_72a)) { -+ if (dwc_otg_param_initialized(core_if->core_params->pti_enable)) { -+ DWC_ERROR -+ ("%d invalid for parameter pti_enable. Check HW configuration.\n", -+ val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->pti_enable = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->pti_enable; -+} -+ -+int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `mpi_enable'\n", val); -+ return -DWC_E_INVALID; -+ } -+ if (val && (core_if->hwcfg2.b.multi_proc_int == 0)) { -+ if (dwc_otg_param_initialized(core_if->core_params->mpi_enable)) { -+ DWC_ERROR -+ ("%d invalid for parameter mpi_enable. Check HW configuration.\n", -+ val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->mpi_enable = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->mpi_enable; -+} -+ -+int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `adp_enable'\n", val); -+ return -DWC_E_INVALID; -+ } -+ if (val && (core_if->hwcfg3.b.adp_supp == 0)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->adp_supp_enable)) { -+ DWC_ERROR -+ ("%d invalid for parameter adp_enable. Check HW configuration.\n", -+ val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->adp_supp_enable = val; -+ /*Set OTG version 2.0 in case of enabling ADP*/ -+ if (val) -+ dwc_otg_set_param_otg_ver(core_if, 1); -+ -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->adp_supp_enable; -+} -+ -+int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `ic_usb_cap'\n", val); -+ DWC_WARN("ic_usb_cap must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val && (core_if->hwcfg2.b.otg_enable_ic_usb == 0)) { -+ if (dwc_otg_param_initialized(core_if->core_params->ic_usb_cap)) { -+ DWC_ERROR -+ ("%d invalid for parameter ic_usb_cap. Check HW configuration.\n", -+ val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->ic_usb_cap = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->ic_usb_cap; -+} -+ -+int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ int valid = 1; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 3)) { -+ DWC_WARN("`%d' invalid for parameter `ahb_thr_ratio'\n", val); -+ DWC_WARN("ahb_thr_ratio must be 0 - 3\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val -+ && (core_if->snpsid < OTG_CORE_REV_2_81a -+ || !dwc_otg_get_param_thr_ctl(core_if))) { -+ valid = 0; -+ } else if (val -+ && ((dwc_otg_get_param_tx_thr_length(core_if) / (1 << val)) < -+ 4)) { -+ valid = 0; -+ } -+ if (valid == 0) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->ahb_thr_ratio)) { -+ DWC_ERROR -+ ("%d invalid for parameter ahb_thr_ratio. Check HW configuration.\n", -+ val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ -+ core_if->core_params->ahb_thr_ratio = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->ahb_thr_ratio; -+} -+ -+int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ int valid = 1; -+ hwcfg4_data_t hwcfg4 = {.d32 = 0 }; -+ hwcfg4.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4); -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 3)) { -+ DWC_WARN("`%d' invalid for parameter `power_down'\n", val); -+ DWC_WARN("power_down must be 0 - 2\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == 2) && (core_if->snpsid < OTG_CORE_REV_2_91a)) { -+ valid = 0; -+ } -+ if ((val == 3) -+ && ((core_if->snpsid < OTG_CORE_REV_3_00a) -+ || (hwcfg4.b.xhiber == 0))) { -+ valid = 0; -+ } -+ if (valid == 0) { -+ if (dwc_otg_param_initialized(core_if->core_params->power_down)) { -+ DWC_ERROR -+ ("%d invalid for parameter power_down. Check HW configuration.\n", -+ val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->power_down = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->power_down; -+} -+ -+int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ int valid = 1; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `reload_ctl'\n", val); -+ DWC_WARN("reload_ctl must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_92a)) { -+ valid = 0; -+ } -+ if (valid == 0) { -+ if (dwc_otg_param_initialized(core_if->core_params->reload_ctl)) { -+ DWC_ERROR("%d invalid for parameter reload_ctl." -+ "Check HW configuration.\n", val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->reload_ctl = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->reload_ctl; -+} -+ -+int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ int valid = 1; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `dev_out_nak'\n", val); -+ DWC_WARN("dev_out_nak must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_93a) || -+ !(core_if->core_params->dma_desc_enable))) { -+ valid = 0; -+ } -+ if (valid == 0) { -+ if (dwc_otg_param_initialized(core_if->core_params->dev_out_nak)) { -+ DWC_ERROR("%d invalid for parameter dev_out_nak." -+ "Check HW configuration.\n", val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->dev_out_nak = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->dev_out_nak; -+} -+ -+int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ int valid = 1; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `cont_on_bna'\n", val); -+ DWC_WARN("cont_on_bna must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_94a) || -+ !(core_if->core_params->dma_desc_enable))) { -+ valid = 0; -+ } -+ if (valid == 0) { -+ if (dwc_otg_param_initialized(core_if->core_params->cont_on_bna)) { -+ DWC_ERROR("%d invalid for parameter cont_on_bna." -+ "Check HW configuration.\n", val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->cont_on_bna = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->cont_on_bna; -+} -+ -+int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ int valid = 1; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `ahb_single'\n", val); -+ DWC_WARN("ahb_single must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_94a)) { -+ valid = 0; -+ } -+ if (valid == 0) { -+ if (dwc_otg_param_initialized(core_if->core_params->ahb_single)) { -+ DWC_ERROR("%d invalid for parameter ahb_single." -+ "Check HW configuration.\n", val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->ahb_single = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->ahb_single; -+} -+ -+int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `otg_ver'\n", val); -+ DWC_WARN -+ ("otg_ver must be 0(for OTG 1.3 support) or 1(for OTG 2.0 support)\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->otg_ver = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->otg_ver; -+} -+ -+uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if) -+{ -+ gotgctl_data_t otgctl; -+ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+ return otgctl.b.hstnegscs; -+} -+ -+uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if) -+{ -+ gotgctl_data_t otgctl; -+ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+ return otgctl.b.sesreqscs; -+} -+ -+void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ if(core_if->otg_ver == 0) { -+ gotgctl_data_t otgctl; -+ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+ otgctl.b.hnpreq = val; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, otgctl.d32); -+ } else { -+ core_if->otg_sts = val; -+ } -+} -+ -+uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->snpsid; -+} -+ -+uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if) -+{ -+ gintsts_data_t gintsts; -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ return gintsts.b.curmode; -+} -+ -+uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if) -+{ -+ gusbcfg_data_t usbcfg; -+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ return usbcfg.b.hnpcap; -+} -+ -+void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ gusbcfg_data_t usbcfg; -+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ usbcfg.b.hnpcap = val; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32); -+} -+ -+uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if) -+{ -+ gusbcfg_data_t usbcfg; -+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ return usbcfg.b.srpcap; -+} -+ -+void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ gusbcfg_data_t usbcfg; -+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ usbcfg.b.srpcap = val; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32); -+} -+ -+uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if) -+{ -+ dcfg_data_t dcfg; -+ /* originally: dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); */ -+ -+ dcfg.d32 = -1; //GRAYG -+ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)\n", __func__, core_if); -+ if (NULL == core_if) -+ DWC_ERROR("reg request with NULL core_if\n"); -+ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)\n", __func__, -+ core_if, core_if->dev_if); -+ if (NULL == core_if->dev_if) -+ DWC_ERROR("reg request with NULL dev_if\n"); -+ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)->" -+ "dev_global_regs(%p)\n", __func__, -+ core_if, core_if->dev_if, -+ core_if->dev_if->dev_global_regs); -+ if (NULL == core_if->dev_if->dev_global_regs) -+ DWC_ERROR("reg request with NULL dev_global_regs\n"); -+ else { -+ DWC_DEBUGPL(DBG_CILV, "%s - &core_if(%p)->dev_if(%p)->" -+ "dev_global_regs(%p)->dcfg = %p\n", __func__, -+ core_if, core_if->dev_if, -+ core_if->dev_if->dev_global_regs, -+ &core_if->dev_if->dev_global_regs->dcfg); -+ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); -+ } -+ return dcfg.b.devspd; -+} -+ -+void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ dcfg_data_t dcfg; -+ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); -+ dcfg.b.devspd = val; -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); -+} -+ -+uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if) -+{ -+ hprt0_data_t hprt0; -+ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); -+ return hprt0.b.prtconnsts; -+} -+ -+uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if) -+{ -+ dsts_data_t dsts; -+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ return dsts.b.enumspd; -+} -+ -+uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if) -+{ -+ hprt0_data_t hprt0; -+ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); -+ return hprt0.b.prtpwr; -+ -+} -+ -+uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->hibernation_suspend; -+} -+ -+void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ hprt0_data_t hprt0; -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtpwr = val; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+} -+ -+uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if) -+{ -+ hprt0_data_t hprt0; -+ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); -+ return hprt0.b.prtsusp; -+ -+} -+ -+void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ hprt0_data_t hprt0; -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtsusp = val; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+} -+ -+uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if) -+{ -+ hfir_data_t hfir; -+ hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); -+ return hfir.b.frint; -+ -+} -+ -+void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ hfir_data_t hfir; -+ uint32_t fram_int; -+ fram_int = calc_frame_interval(core_if); -+ hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); -+ if (!core_if->core_params->reload_ctl) { -+ DWC_WARN("\nCannot reload HFIR register.HFIR.HFIRRldCtrl bit is" -+ "not set to 1.\nShould load driver with reload_ctl=1" -+ " module parameter\n"); -+ return; -+ } -+ switch (fram_int) { -+ case 3750: -+ if ((val < 3350) || (val > 4150)) { -+ DWC_WARN("HFIR interval for HS core and 30 MHz" -+ "clock freq should be from 3350 to 4150\n"); -+ return; -+ } -+ break; -+ case 30000: -+ if ((val < 26820) || (val > 33180)) { -+ DWC_WARN("HFIR interval for FS/LS core and 30 MHz" -+ "clock freq should be from 26820 to 33180\n"); -+ return; -+ } -+ break; -+ case 6000: -+ if ((val < 5360) || (val > 6640)) { -+ DWC_WARN("HFIR interval for HS core and 48 MHz" -+ "clock freq should be from 5360 to 6640\n"); -+ return; -+ } -+ break; -+ case 48000: -+ if ((val < 42912) || (val > 53088)) { -+ DWC_WARN("HFIR interval for FS/LS core and 48 MHz" -+ "clock freq should be from 42912 to 53088\n"); -+ return; -+ } -+ break; -+ case 7500: -+ if ((val < 6700) || (val > 8300)) { -+ DWC_WARN("HFIR interval for HS core and 60 MHz" -+ "clock freq should be from 6700 to 8300\n"); -+ return; -+ } -+ break; -+ case 60000: -+ if ((val < 53640) || (val > 65536)) { -+ DWC_WARN("HFIR interval for FS/LS core and 60 MHz" -+ "clock freq should be from 53640 to 65536\n"); -+ return; -+ } -+ break; -+ default: -+ DWC_WARN("Unknown frame interval\n"); -+ return; -+ break; -+ -+ } -+ hfir.b.frint = val; -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hfir.d32); -+} -+ -+uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if) -+{ -+ hcfg_data_t hcfg; -+ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); -+ return hcfg.b.modechtimen; -+ -+} -+ -+void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ hcfg_data_t hcfg; -+ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); -+ hcfg.b.modechtimen = val; -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32); -+} -+ -+void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ hprt0_data_t hprt0; -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtres = val; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+} -+ -+uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if) -+{ -+ dctl_data_t dctl; -+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); -+ return dctl.b.rmtwkupsig; -+} -+ -+uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if) -+{ -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ -+ DWC_ASSERT(! -+ ((core_if->lx_state == DWC_OTG_L1) ^ lpmcfg.b.prt_sleep_sts), -+ "lx_state = %d, lmpcfg.prt_sleep_sts = %d\n", -+ core_if->lx_state, lpmcfg.b.prt_sleep_sts); -+ -+ return lpmcfg.b.prt_sleep_sts; -+} -+ -+uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if) -+{ -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ return lpmcfg.b.rem_wkup_en; -+} -+ -+uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if) -+{ -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ return lpmcfg.b.appl_resp; -+} -+ -+void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ lpmcfg.b.appl_resp = val; -+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); -+} -+ -+uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if) -+{ -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ return lpmcfg.b.hsic_connect; -+} -+ -+void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ lpmcfg.b.hsic_connect = val; -+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); -+} -+ -+uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if) -+{ -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ return lpmcfg.b.inv_sel_hsic; -+ -+} -+ -+void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ lpmcfg.b.inv_sel_hsic = val; -+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); -+} -+ -+uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+} -+ -+void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, val); -+} -+ -+uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+} -+ -+void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, val); -+} -+ -+uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); -+} -+ -+void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, val); -+} -+ -+uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz); -+} -+ -+void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz, val); -+} -+ -+uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(&core_if->core_global_regs->gpvndctl); -+} -+ -+void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gpvndctl, val); -+} -+ -+uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(&core_if->core_global_regs->ggpio); -+} -+ -+void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, val); -+} -+ -+uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(core_if->host_if->hprt0); -+ -+} -+ -+void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ DWC_WRITE_REG32(core_if->host_if->hprt0, val); -+} -+ -+uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(&core_if->core_global_regs->guid); -+} -+ -+void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ DWC_WRITE_REG32(&core_if->core_global_regs->guid, val); -+} -+ -+uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz); -+} -+ -+uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if) -+{ -+ return ((core_if->otg_ver == 1) ? (uint16_t)0x0200 : (uint16_t)0x0103); -+} -+ -+/** -+ * Start the SRP timer to detect when the SRP does not complete within -+ * 6 seconds. -+ * -+ * @param core_if the pointer to core_if strucure. -+ */ -+void dwc_otg_pcd_start_srp_timer(dwc_otg_core_if_t * core_if) -+{ -+ core_if->srp_timer_started = 1; -+ DWC_TIMER_SCHEDULE(core_if->srp_timer, 6000 /* 6 secs */ ); -+} -+ -+void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if) -+{ -+ uint32_t *addr = (uint32_t *) & (core_if->core_global_regs->gotgctl); -+ gotgctl_data_t mem; -+ gotgctl_data_t val; -+ -+ val.d32 = DWC_READ_REG32(addr); -+ if (val.b.sesreq) { -+ DWC_ERROR("Session Request Already active!\n"); -+ return; -+ } -+ -+ DWC_INFO("Session Request Initated\n"); //NOTICE -+ mem.d32 = DWC_READ_REG32(addr); -+ mem.b.sesreq = 1; -+ DWC_WRITE_REG32(addr, mem.d32); -+ -+ /* Start the SRP timer */ -+ dwc_otg_pcd_start_srp_timer(core_if); -+ return; -+} ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_cil.h -@@ -0,0 +1,1464 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $ -+ * $Revision: #123 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#if !defined(__DWC_CIL_H__) -+#define __DWC_CIL_H__ -+ -+#include "dwc_list.h" -+#include "dwc_otg_dbg.h" -+#include "dwc_otg_regs.h" -+ -+#include "dwc_otg_core_if.h" -+#include "dwc_otg_adp.h" -+ -+/** -+ * @file -+ * This file contains the interface to the Core Interface Layer. -+ */ -+ -+#ifdef DWC_UTE_CFI -+ -+#define MAX_DMA_DESCS_PER_EP 256 -+ -+/** -+ * Enumeration for the data buffer mode -+ */ -+typedef enum _data_buffer_mode { -+ BM_STANDARD = 0, /* data buffer is in normal mode */ -+ BM_SG = 1, /* data buffer uses the scatter/gather mode */ -+ BM_CONCAT = 2, /* data buffer uses the concatenation mode */ -+ BM_CIRCULAR = 3, /* data buffer uses the circular DMA mode */ -+ BM_ALIGN = 4 /* data buffer is in buffer alignment mode */ -+} data_buffer_mode_e; -+#endif //DWC_UTE_CFI -+ -+/** Macros defined for DWC OTG HW Release version */ -+ -+#define OTG_CORE_REV_2_60a 0x4F54260A -+#define OTG_CORE_REV_2_71a 0x4F54271A -+#define OTG_CORE_REV_2_72a 0x4F54272A -+#define OTG_CORE_REV_2_80a 0x4F54280A -+#define OTG_CORE_REV_2_81a 0x4F54281A -+#define OTG_CORE_REV_2_90a 0x4F54290A -+#define OTG_CORE_REV_2_91a 0x4F54291A -+#define OTG_CORE_REV_2_92a 0x4F54292A -+#define OTG_CORE_REV_2_93a 0x4F54293A -+#define OTG_CORE_REV_2_94a 0x4F54294A -+#define OTG_CORE_REV_3_00a 0x4F54300A -+ -+/** -+ * Information for each ISOC packet. -+ */ -+typedef struct iso_pkt_info { -+ uint32_t offset; -+ uint32_t length; -+ int32_t status; -+} iso_pkt_info_t; -+ -+/** -+ * The dwc_ep structure represents the state of a single -+ * endpoint when acting in device mode. It contains the data items -+ * needed for an endpoint to be activated and transfer packets. -+ */ -+typedef struct dwc_ep { -+ /** EP number used for register address lookup */ -+ uint8_t num; -+ /** EP direction 0 = OUT */ -+ unsigned is_in:1; -+ /** EP active. */ -+ unsigned active:1; -+ -+ /** -+ * Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic -+ * Tx FIFO. If dedicated Tx FIFOs are enabled Tx FIFO # FOR IN EPs*/ -+ unsigned tx_fifo_num:4; -+ /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */ -+ unsigned type:2; -+#define DWC_OTG_EP_TYPE_CONTROL 0 -+#define DWC_OTG_EP_TYPE_ISOC 1 -+#define DWC_OTG_EP_TYPE_BULK 2 -+#define DWC_OTG_EP_TYPE_INTR 3 -+ -+ /** DATA start PID for INTR and BULK EP */ -+ unsigned data_pid_start:1; -+ /** Frame (even/odd) for ISOC EP */ -+ unsigned even_odd_frame:1; -+ /** Max Packet bytes */ -+ unsigned maxpacket:11; -+ -+ /** Max Transfer size */ -+ uint32_t maxxfer; -+ -+ /** @name Transfer state */ -+ /** @{ */ -+ -+ /** -+ * Pointer to the beginning of the transfer buffer -- do not modify -+ * during transfer. -+ */ -+ -+ dwc_dma_t dma_addr; -+ -+ dwc_dma_t dma_desc_addr; -+ dwc_otg_dev_dma_desc_t *desc_addr; -+ -+ uint8_t *start_xfer_buff; -+ /** pointer to the transfer buffer */ -+ uint8_t *xfer_buff; -+ /** Number of bytes to transfer */ -+ unsigned xfer_len:19; -+ /** Number of bytes transferred. */ -+ unsigned xfer_count:19; -+ /** Sent ZLP */ -+ unsigned sent_zlp:1; -+ /** Total len for control transfer */ -+ unsigned total_len:19; -+ -+ /** stall clear flag */ -+ unsigned stall_clear_flag:1; -+ -+ /** SETUP pkt cnt rollover flag for EP0 out*/ -+ unsigned stp_rollover; -+ -+#ifdef DWC_UTE_CFI -+ /* The buffer mode */ -+ data_buffer_mode_e buff_mode; -+ -+ /* The chain of DMA descriptors. -+ * MAX_DMA_DESCS_PER_EP will be allocated for each active EP. -+ */ -+ dwc_otg_dma_desc_t *descs; -+ -+ /* The DMA address of the descriptors chain start */ -+ dma_addr_t descs_dma_addr; -+ /** This variable stores the length of the last enqueued request */ -+ uint32_t cfi_req_len; -+#endif //DWC_UTE_CFI -+ -+/** Max DMA Descriptor count for any EP */ -+#define MAX_DMA_DESC_CNT 256 -+ /** Allocated DMA Desc count */ -+ uint32_t desc_cnt; -+ -+ /** bInterval */ -+ uint32_t bInterval; -+ /** Next frame num to setup next ISOC transfer */ -+ uint32_t frame_num; -+ /** Indicates SOF number overrun in DSTS */ -+ uint8_t frm_overrun; -+ -+#ifdef DWC_UTE_PER_IO -+ /** Next frame num for which will be setup DMA Desc */ -+ uint32_t xiso_frame_num; -+ /** bInterval */ -+ uint32_t xiso_bInterval; -+ /** Count of currently active transfers - shall be either 0 or 1 */ -+ int xiso_active_xfers; -+ int xiso_queued_xfers; -+#endif -+#ifdef DWC_EN_ISOC -+ /** -+ * Variables specific for ISOC EPs -+ * -+ */ -+ /** DMA addresses of ISOC buffers */ -+ dwc_dma_t dma_addr0; -+ dwc_dma_t dma_addr1; -+ -+ dwc_dma_t iso_dma_desc_addr; -+ dwc_otg_dev_dma_desc_t *iso_desc_addr; -+ -+ /** pointer to the transfer buffers */ -+ uint8_t *xfer_buff0; -+ uint8_t *xfer_buff1; -+ -+ /** number of ISOC Buffer is processing */ -+ uint32_t proc_buf_num; -+ /** Interval of ISOC Buffer processing */ -+ uint32_t buf_proc_intrvl; -+ /** Data size for regular frame */ -+ uint32_t data_per_frame; -+ -+ /* todo - pattern data support is to be implemented in the future */ -+ /** Data size for pattern frame */ -+ uint32_t data_pattern_frame; -+ /** Frame number of pattern data */ -+ uint32_t sync_frame; -+ -+ /** bInterval */ -+ uint32_t bInterval; -+ /** ISO Packet number per frame */ -+ uint32_t pkt_per_frm; -+ /** Next frame num for which will be setup DMA Desc */ -+ uint32_t next_frame; -+ /** Number of packets per buffer processing */ -+ uint32_t pkt_cnt; -+ /** Info for all isoc packets */ -+ iso_pkt_info_t *pkt_info; -+ /** current pkt number */ -+ uint32_t cur_pkt; -+ /** current pkt number */ -+ uint8_t *cur_pkt_addr; -+ /** current pkt number */ -+ uint32_t cur_pkt_dma_addr; -+#endif /* DWC_EN_ISOC */ -+ -+/** @} */ -+} dwc_ep_t; -+ -+/* -+ * Reasons for halting a host channel. -+ */ -+typedef enum dwc_otg_halt_status { -+ DWC_OTG_HC_XFER_NO_HALT_STATUS, -+ DWC_OTG_HC_XFER_COMPLETE, -+ DWC_OTG_HC_XFER_URB_COMPLETE, -+ DWC_OTG_HC_XFER_ACK, -+ DWC_OTG_HC_XFER_NAK, -+ DWC_OTG_HC_XFER_NYET, -+ DWC_OTG_HC_XFER_STALL, -+ DWC_OTG_HC_XFER_XACT_ERR, -+ DWC_OTG_HC_XFER_FRAME_OVERRUN, -+ DWC_OTG_HC_XFER_BABBLE_ERR, -+ DWC_OTG_HC_XFER_DATA_TOGGLE_ERR, -+ DWC_OTG_HC_XFER_AHB_ERR, -+ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, -+ DWC_OTG_HC_XFER_URB_DEQUEUE -+} dwc_otg_halt_status_e; -+ -+/** -+ * Host channel descriptor. This structure represents the state of a single -+ * host channel when acting in host mode. It contains the data items needed to -+ * transfer packets to an endpoint via a host channel. -+ */ -+typedef struct dwc_hc { -+ /** Host channel number used for register address lookup */ -+ uint8_t hc_num; -+ -+ /** Device to access */ -+ unsigned dev_addr:7; -+ -+ /** EP to access */ -+ unsigned ep_num:4; -+ -+ /** EP direction. 0: OUT, 1: IN */ -+ unsigned ep_is_in:1; -+ -+ /** -+ * EP speed. -+ * One of the following values: -+ * - DWC_OTG_EP_SPEED_LOW -+ * - DWC_OTG_EP_SPEED_FULL -+ * - DWC_OTG_EP_SPEED_HIGH -+ */ -+ unsigned speed:2; -+#define DWC_OTG_EP_SPEED_LOW 0 -+#define DWC_OTG_EP_SPEED_FULL 1 -+#define DWC_OTG_EP_SPEED_HIGH 2 -+ -+ /** -+ * Endpoint type. -+ * One of the following values: -+ * - DWC_OTG_EP_TYPE_CONTROL: 0 -+ * - DWC_OTG_EP_TYPE_ISOC: 1 -+ * - DWC_OTG_EP_TYPE_BULK: 2 -+ * - DWC_OTG_EP_TYPE_INTR: 3 -+ */ -+ unsigned ep_type:2; -+ -+ /** Max packet size in bytes */ -+ unsigned max_packet:11; -+ -+ /** -+ * PID for initial transaction. -+ * 0: DATA0,
-+ * 1: DATA2,
-+ * 2: DATA1,
-+ * 3: MDATA (non-Control EP), -+ * SETUP (Control EP) -+ */ -+ unsigned data_pid_start:2; -+#define DWC_OTG_HC_PID_DATA0 0 -+#define DWC_OTG_HC_PID_DATA2 1 -+#define DWC_OTG_HC_PID_DATA1 2 -+#define DWC_OTG_HC_PID_MDATA 3 -+#define DWC_OTG_HC_PID_SETUP 3 -+ -+ /** Number of periodic transactions per (micro)frame */ -+ unsigned multi_count:2; -+ -+ /** @name Transfer State */ -+ /** @{ */ -+ -+ /** Pointer to the current transfer buffer position. */ -+ uint8_t *xfer_buff; -+ /** -+ * In Buffer DMA mode this buffer will be used -+ * if xfer_buff is not DWORD aligned. -+ */ -+ dwc_dma_t align_buff; -+ /** Total number of bytes to transfer. */ -+ uint32_t xfer_len; -+ /** Number of bytes transferred so far. */ -+ uint32_t xfer_count; -+ /** Packet count at start of transfer.*/ -+ uint16_t start_pkt_count; -+ -+ /** -+ * Flag to indicate whether the transfer has been started. Set to 1 if -+ * it has been started, 0 otherwise. -+ */ -+ uint8_t xfer_started; -+ -+ /** -+ * Set to 1 to indicate that a PING request should be issued on this -+ * channel. If 0, process normally. -+ */ -+ uint8_t do_ping; -+ -+ /** -+ * Set to 1 to indicate that the error count for this transaction is -+ * non-zero. Set to 0 if the error count is 0. -+ */ -+ uint8_t error_state; -+ -+ /** -+ * Set to 1 to indicate that this channel should be halted the next -+ * time a request is queued for the channel. This is necessary in -+ * slave mode if no request queue space is available when an attempt -+ * is made to halt the channel. -+ */ -+ uint8_t halt_on_queue; -+ -+ /** -+ * Set to 1 if the host channel has been halted, but the core is not -+ * finished flushing queued requests. Otherwise 0. -+ */ -+ uint8_t halt_pending; -+ -+ /** -+ * Reason for halting the host channel. -+ */ -+ dwc_otg_halt_status_e halt_status; -+ -+ /* -+ * Split settings for the host channel -+ */ -+ uint8_t do_split; /**< Enable split for the channel */ -+ uint8_t complete_split; /**< Enable complete split */ -+ uint8_t hub_addr; /**< Address of high speed hub */ -+ -+ uint8_t port_addr; /**< Port of the low/full speed device */ -+ /** Split transaction position -+ * One of the following values: -+ * - DWC_HCSPLIT_XACTPOS_MID -+ * - DWC_HCSPLIT_XACTPOS_BEGIN -+ * - DWC_HCSPLIT_XACTPOS_END -+ * - DWC_HCSPLIT_XACTPOS_ALL */ -+ uint8_t xact_pos; -+ -+ /** Set when the host channel does a short read. */ -+ uint8_t short_read; -+ -+ /** -+ * Number of requests issued for this channel since it was assigned to -+ * the current transfer (not counting PINGs). -+ */ -+ uint8_t requests; -+ -+ /** -+ * Queue Head for the transfer being processed by this channel. -+ */ -+ struct dwc_otg_qh *qh; -+ -+ /** @} */ -+ -+ /** Entry in list of host channels. */ -+ DWC_CIRCLEQ_ENTRY(dwc_hc) hc_list_entry; -+ -+ /** @name Descriptor DMA support */ -+ /** @{ */ -+ -+ /** Number of Transfer Descriptors */ -+ uint16_t ntd; -+ -+ /** Descriptor List DMA address */ -+ dwc_dma_t desc_list_addr; -+ -+ /** Scheduling micro-frame bitmap. */ -+ uint8_t schinfo; -+ -+ /** @} */ -+} dwc_hc_t; -+ -+/** -+ * The following parameters may be specified when starting the module. These -+ * parameters define how the DWC_otg controller should be configured. -+ */ -+typedef struct dwc_otg_core_params { -+ int32_t opt; -+ -+ /** -+ * Specifies the OTG capabilities. The driver will automatically -+ * detect the value for this parameter if none is specified. -+ * 0 - HNP and SRP capable (default) -+ * 1 - SRP Only capable -+ * 2 - No HNP/SRP capable -+ */ -+ int32_t otg_cap; -+ -+ /** -+ * Specifies whether to use slave or DMA mode for accessing the data -+ * FIFOs. The driver will automatically detect the value for this -+ * parameter if none is specified. -+ * 0 - Slave -+ * 1 - DMA (default, if available) -+ */ -+ int32_t dma_enable; -+ -+ /** -+ * When DMA mode is enabled specifies whether to use address DMA or DMA -+ * Descriptor mode for accessing the data FIFOs in device mode. The driver -+ * will automatically detect the value for this if none is specified. -+ * 0 - address DMA -+ * 1 - DMA Descriptor(default, if available) -+ */ -+ int32_t dma_desc_enable; -+ /** The DMA Burst size (applicable only for External DMA -+ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) -+ */ -+ int32_t dma_burst_size; /* Translate this to GAHBCFG values */ -+ -+ /** -+ * Specifies the maximum speed of operation in host and device mode. -+ * The actual speed depends on the speed of the attached device and -+ * the value of phy_type. The actual speed depends on the speed of the -+ * attached device. -+ * 0 - High Speed (default) -+ * 1 - Full Speed -+ */ -+ int32_t speed; -+ /** Specifies whether low power mode is supported when attached -+ * to a Full Speed or Low Speed device in host mode. -+ * 0 - Don't support low power mode (default) -+ * 1 - Support low power mode -+ */ -+ int32_t host_support_fs_ls_low_power; -+ -+ /** Specifies the PHY clock rate in low power mode when connected to a -+ * Low Speed device in host mode. This parameter is applicable only if -+ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS -+ * then defaults to 6 MHZ otherwise 48 MHZ. -+ * -+ * 0 - 48 MHz -+ * 1 - 6 MHz -+ */ -+ int32_t host_ls_low_power_phy_clk; -+ -+ /** -+ * 0 - Use cC FIFO size parameters -+ * 1 - Allow dynamic FIFO sizing (default) -+ */ -+ int32_t enable_dynamic_fifo; -+ -+ /** Total number of 4-byte words in the data FIFO memory. This -+ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic -+ * Tx FIFOs. -+ * 32 to 32768 (default 8192) -+ * Note: The total FIFO memory depth in the FPGA configuration is 8192. -+ */ -+ int32_t data_fifo_size; -+ -+ /** Number of 4-byte words in the Rx FIFO in device mode when dynamic -+ * FIFO sizing is enabled. -+ * 16 to 32768 (default 1064) -+ */ -+ int32_t dev_rx_fifo_size; -+ -+ /** Number of 4-byte words in the non-periodic Tx FIFO in device mode -+ * when dynamic FIFO sizing is enabled. -+ * 16 to 32768 (default 1024) -+ */ -+ int32_t dev_nperio_tx_fifo_size; -+ -+ /** Number of 4-byte words in each of the periodic Tx FIFOs in device -+ * mode when dynamic FIFO sizing is enabled. -+ * 4 to 768 (default 256) -+ */ -+ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS]; -+ -+ /** Number of 4-byte words in the Rx FIFO in host mode when dynamic -+ * FIFO sizing is enabled. -+ * 16 to 32768 (default 1024) -+ */ -+ int32_t host_rx_fifo_size; -+ -+ /** Number of 4-byte words in the non-periodic Tx FIFO in host mode -+ * when Dynamic FIFO sizing is enabled in the core. -+ * 16 to 32768 (default 1024) -+ */ -+ int32_t host_nperio_tx_fifo_size; -+ -+ /** Number of 4-byte words in the host periodic Tx FIFO when dynamic -+ * FIFO sizing is enabled. -+ * 16 to 32768 (default 1024) -+ */ -+ int32_t host_perio_tx_fifo_size; -+ -+ /** The maximum transfer size supported in bytes. -+ * 2047 to 65,535 (default 65,535) -+ */ -+ int32_t max_transfer_size; -+ -+ /** The maximum number of packets in a transfer. -+ * 15 to 511 (default 511) -+ */ -+ int32_t max_packet_count; -+ -+ /** The number of host channel registers to use. -+ * 1 to 16 (default 12) -+ * Note: The FPGA configuration supports a maximum of 12 host channels. -+ */ -+ int32_t host_channels; -+ -+ /** The number of endpoints in addition to EP0 available for device -+ * mode operations. -+ * 1 to 15 (default 6 IN and OUT) -+ * Note: The FPGA configuration supports a maximum of 6 IN and OUT -+ * endpoints in addition to EP0. -+ */ -+ int32_t dev_endpoints; -+ -+ /** -+ * Specifies the type of PHY interface to use. By default, the driver -+ * will automatically detect the phy_type. -+ * -+ * 0 - Full Speed PHY -+ * 1 - UTMI+ (default) -+ * 2 - ULPI -+ */ -+ int32_t phy_type; -+ -+ /** -+ * Specifies the UTMI+ Data Width. This parameter is -+ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI -+ * PHY_TYPE, this parameter indicates the data width between -+ * the MAC and the ULPI Wrapper.) Also, this parameter is -+ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set -+ * to "8 and 16 bits", meaning that the core has been -+ * configured to work at either data path width. -+ * -+ * 8 or 16 bits (default 16) -+ */ -+ int32_t phy_utmi_width; -+ -+ /** -+ * Specifies whether the ULPI operates at double or single -+ * data rate. This parameter is only applicable if PHY_TYPE is -+ * ULPI. -+ * -+ * 0 - single data rate ULPI interface with 8 bit wide data -+ * bus (default) -+ * 1 - double data rate ULPI interface with 4 bit wide data -+ * bus -+ */ -+ int32_t phy_ulpi_ddr; -+ -+ /** -+ * Specifies whether to use the internal or external supply to -+ * drive the vbus with a ULPI phy. -+ */ -+ int32_t phy_ulpi_ext_vbus; -+ -+ /** -+ * Specifies whether to use the I2Cinterface for full speed PHY. This -+ * parameter is only applicable if PHY_TYPE is FS. -+ * 0 - No (default) -+ * 1 - Yes -+ */ -+ int32_t i2c_enable; -+ -+ int32_t ulpi_fs_ls; -+ -+ int32_t ts_dline; -+ -+ /** -+ * Specifies whether dedicated transmit FIFOs are -+ * enabled for non periodic IN endpoints in device mode -+ * 0 - No -+ * 1 - Yes -+ */ -+ int32_t en_multiple_tx_fifo; -+ -+ /** Number of 4-byte words in each of the Tx FIFOs in device -+ * mode when dynamic FIFO sizing is enabled. -+ * 4 to 768 (default 256) -+ */ -+ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS]; -+ -+ /** Thresholding enable flag- -+ * bit 0 - enable non-ISO Tx thresholding -+ * bit 1 - enable ISO Tx thresholding -+ * bit 2 - enable Rx thresholding -+ */ -+ uint32_t thr_ctl; -+ -+ /** Thresholding length for Tx -+ * FIFOs in 32 bit DWORDs -+ */ -+ uint32_t tx_thr_length; -+ -+ /** Thresholding length for Rx -+ * FIFOs in 32 bit DWORDs -+ */ -+ uint32_t rx_thr_length; -+ -+ /** -+ * Specifies whether LPM (Link Power Management) support is enabled -+ */ -+ int32_t lpm_enable; -+ -+ /** Per Transfer Interrupt -+ * mode enable flag -+ * 1 - Enabled -+ * 0 - Disabled -+ */ -+ int32_t pti_enable; -+ -+ /** Multi Processor Interrupt -+ * mode enable flag -+ * 1 - Enabled -+ * 0 - Disabled -+ */ -+ int32_t mpi_enable; -+ -+ /** IS_USB Capability -+ * 1 - Enabled -+ * 0 - Disabled -+ */ -+ int32_t ic_usb_cap; -+ -+ /** AHB Threshold Ratio -+ * 2'b00 AHB Threshold = MAC Threshold -+ * 2'b01 AHB Threshold = 1/2 MAC Threshold -+ * 2'b10 AHB Threshold = 1/4 MAC Threshold -+ * 2'b11 AHB Threshold = 1/8 MAC Threshold -+ */ -+ int32_t ahb_thr_ratio; -+ -+ /** ADP Support -+ * 1 - Enabled -+ * 0 - Disabled -+ */ -+ int32_t adp_supp_enable; -+ -+ /** HFIR Reload Control -+ * 0 - The HFIR cannot be reloaded dynamically. -+ * 1 - Allow dynamic reloading of the HFIR register during runtime. -+ */ -+ int32_t reload_ctl; -+ -+ /** DCFG: Enable device Out NAK -+ * 0 - The core does not set NAK after Bulk Out transfer complete. -+ * 1 - The core sets NAK after Bulk OUT transfer complete. -+ */ -+ int32_t dev_out_nak; -+ -+ /** DCFG: Enable Continue on BNA -+ * After receiving BNA interrupt the core disables the endpoint,when the -+ * endpoint is re-enabled by the application the core starts processing -+ * 0 - from the DOEPDMA descriptor -+ * 1 - from the descriptor which received the BNA. -+ */ -+ int32_t cont_on_bna; -+ -+ /** GAHBCFG: AHB Single Support -+ * This bit when programmed supports SINGLE transfers for remainder -+ * data in a transfer for DMA mode of operation. -+ * 0 - in this case the remainder data will be sent using INCR burst size. -+ * 1 - in this case the remainder data will be sent using SINGLE burst size. -+ */ -+ int32_t ahb_single; -+ -+ /** Core Power down mode -+ * 0 - No Power Down is enabled -+ * 1 - Reserved -+ * 2 - Complete Power Down (Hibernation) -+ */ -+ int32_t power_down; -+ -+ /** OTG revision supported -+ * 0 - OTG 1.3 revision -+ * 1 - OTG 2.0 revision -+ */ -+ int32_t otg_ver; -+ -+} dwc_otg_core_params_t; -+ -+#ifdef DEBUG -+struct dwc_otg_core_if; -+typedef struct hc_xfer_info { -+ struct dwc_otg_core_if *core_if; -+ dwc_hc_t *hc; -+} hc_xfer_info_t; -+#endif -+ -+typedef struct ep_xfer_info { -+ struct dwc_otg_core_if *core_if; -+ dwc_ep_t *ep; -+ uint8_t state; -+} ep_xfer_info_t; -+/* -+ * Device States -+ */ -+typedef enum dwc_otg_lx_state { -+ /** On state */ -+ DWC_OTG_L0, -+ /** LPM sleep state*/ -+ DWC_OTG_L1, -+ /** USB suspend state*/ -+ DWC_OTG_L2, -+ /** Off state*/ -+ DWC_OTG_L3 -+} dwc_otg_lx_state_e; -+ -+struct dwc_otg_global_regs_backup { -+ uint32_t gotgctl_local; -+ uint32_t gintmsk_local; -+ uint32_t gahbcfg_local; -+ uint32_t gusbcfg_local; -+ uint32_t grxfsiz_local; -+ uint32_t gnptxfsiz_local; -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ uint32_t glpmcfg_local; -+#endif -+ uint32_t gi2cctl_local; -+ uint32_t hptxfsiz_local; -+ uint32_t pcgcctl_local; -+ uint32_t gdfifocfg_local; -+ uint32_t dtxfsiz_local[MAX_EPS_CHANNELS]; -+ uint32_t gpwrdn_local; -+ uint32_t xhib_pcgcctl; -+ uint32_t xhib_gpwrdn; -+}; -+ -+struct dwc_otg_host_regs_backup { -+ uint32_t hcfg_local; -+ uint32_t haintmsk_local; -+ uint32_t hcintmsk_local[MAX_EPS_CHANNELS]; -+ uint32_t hprt0_local; -+ uint32_t hfir_local; -+}; -+ -+struct dwc_otg_dev_regs_backup { -+ uint32_t dcfg; -+ uint32_t dctl; -+ uint32_t daintmsk; -+ uint32_t diepmsk; -+ uint32_t doepmsk; -+ uint32_t diepctl[MAX_EPS_CHANNELS]; -+ uint32_t dieptsiz[MAX_EPS_CHANNELS]; -+ uint32_t diepdma[MAX_EPS_CHANNELS]; -+}; -+/** -+ * The dwc_otg_core_if structure contains information needed to manage -+ * the DWC_otg controller acting in either host or device mode. It -+ * represents the programming view of the controller as a whole. -+ */ -+struct dwc_otg_core_if { -+ /** Parameters that define how the core should be configured.*/ -+ dwc_otg_core_params_t *core_params; -+ -+ /** Core Global registers starting at offset 000h. */ -+ dwc_otg_core_global_regs_t *core_global_regs; -+ -+ /** Device-specific information */ -+ dwc_otg_dev_if_t *dev_if; -+ /** Host-specific information */ -+ dwc_otg_host_if_t *host_if; -+ -+ /** Value from SNPSID register */ -+ uint32_t snpsid; -+ -+ /* -+ * Set to 1 if the core PHY interface bits in USBCFG have been -+ * initialized. -+ */ -+ uint8_t phy_init_done; -+ -+ /* -+ * SRP Success flag, set by srp success interrupt in FS I2C mode -+ */ -+ uint8_t srp_success; -+ uint8_t srp_timer_started; -+ /** Timer for SRP. If it expires before SRP is successful -+ * clear the SRP. */ -+ dwc_timer_t *srp_timer; -+ -+#ifdef DWC_DEV_SRPCAP -+ /* This timer is needed to power on the hibernated host core if SRP is not -+ * initiated on connected SRP capable device for limited period of time -+ */ -+ uint8_t pwron_timer_started; -+ dwc_timer_t *pwron_timer; -+#endif -+ /* Common configuration information */ -+ /** Power and Clock Gating Control Register */ -+ volatile uint32_t *pcgcctl; -+#define DWC_OTG_PCGCCTL_OFFSET 0xE00 -+ -+ /** Push/pop addresses for endpoints or host channels.*/ -+ uint32_t *data_fifo[MAX_EPS_CHANNELS]; -+#define DWC_OTG_DATA_FIFO_OFFSET 0x1000 -+#define DWC_OTG_DATA_FIFO_SIZE 0x1000 -+ -+ /** Total RAM for FIFOs (Bytes) */ -+ uint16_t total_fifo_size; -+ /** Size of Rx FIFO (Bytes) */ -+ uint16_t rx_fifo_size; -+ /** Size of Non-periodic Tx FIFO (Bytes) */ -+ uint16_t nperio_tx_fifo_size; -+ -+ /** 1 if DMA is enabled, 0 otherwise. */ -+ uint8_t dma_enable; -+ -+ /** 1 if DMA descriptor is enabled, 0 otherwise. */ -+ uint8_t dma_desc_enable; -+ -+ /** 1 if PTI Enhancement mode is enabled, 0 otherwise. */ -+ uint8_t pti_enh_enable; -+ -+ /** 1 if MPI Enhancement mode is enabled, 0 otherwise. */ -+ uint8_t multiproc_int_enable; -+ -+ /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */ -+ uint8_t en_multiple_tx_fifo; -+ -+ /** Set to 1 if multiple packets of a high-bandwidth transfer is in -+ * process of being queued */ -+ uint8_t queuing_high_bandwidth; -+ -+ /** Hardware Configuration -- stored here for convenience.*/ -+ hwcfg1_data_t hwcfg1; -+ hwcfg2_data_t hwcfg2; -+ hwcfg3_data_t hwcfg3; -+ hwcfg4_data_t hwcfg4; -+ fifosize_data_t hptxfsiz; -+ -+ /** Host and Device Configuration -- stored here for convenience.*/ -+ hcfg_data_t hcfg; -+ dcfg_data_t dcfg; -+ -+ /** The operational State, during transations -+ * (a_host>>a_peripherial and b_device=>b_host) this may not -+ * match the core but allows the software to determine -+ * transitions. -+ */ -+ uint8_t op_state; -+ -+ /** -+ * Set to 1 if the HCD needs to be restarted on a session request -+ * interrupt. This is required if no connector ID status change has -+ * occurred since the HCD was last disconnected. -+ */ -+ uint8_t restart_hcd_on_session_req; -+ -+ /** HCD callbacks */ -+ /** A-Device is a_host */ -+#define A_HOST (1) -+ /** A-Device is a_suspend */ -+#define A_SUSPEND (2) -+ /** A-Device is a_peripherial */ -+#define A_PERIPHERAL (3) -+ /** B-Device is operating as a Peripheral. */ -+#define B_PERIPHERAL (4) -+ /** B-Device is operating as a Host. */ -+#define B_HOST (5) -+ -+ /** HCD callbacks */ -+ struct dwc_otg_cil_callbacks *hcd_cb; -+ /** PCD callbacks */ -+ struct dwc_otg_cil_callbacks *pcd_cb; -+ -+ /** Device mode Periodic Tx FIFO Mask */ -+ uint32_t p_tx_msk; -+ /** Device mode Periodic Tx FIFO Mask */ -+ uint32_t tx_msk; -+ -+ /** Workqueue object used for handling several interrupts */ -+ dwc_workq_t *wq_otg; -+ -+ /** Timer object used for handling "Wakeup Detected" Interrupt */ -+ dwc_timer_t *wkp_timer; -+ /** This arrays used for debug purposes for DEV OUT NAK enhancement */ -+ uint32_t start_doeptsiz_val[MAX_EPS_CHANNELS]; -+ ep_xfer_info_t ep_xfer_info[MAX_EPS_CHANNELS]; -+ dwc_timer_t *ep_xfer_timer[MAX_EPS_CHANNELS]; -+#ifdef DEBUG -+ uint32_t start_hcchar_val[MAX_EPS_CHANNELS]; -+ -+ hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS]; -+ dwc_timer_t *hc_xfer_timer[MAX_EPS_CHANNELS]; -+ -+ uint32_t hfnum_7_samples; -+ uint64_t hfnum_7_frrem_accum; -+ uint32_t hfnum_0_samples; -+ uint64_t hfnum_0_frrem_accum; -+ uint32_t hfnum_other_samples; -+ uint64_t hfnum_other_frrem_accum; -+#endif -+ -+#ifdef DWC_UTE_CFI -+ uint16_t pwron_rxfsiz; -+ uint16_t pwron_gnptxfsiz; -+ uint16_t pwron_txfsiz[15]; -+ -+ uint16_t init_rxfsiz; -+ uint16_t init_gnptxfsiz; -+ uint16_t init_txfsiz[15]; -+#endif -+ -+ /** Lx state of device */ -+ dwc_otg_lx_state_e lx_state; -+ -+ /** Saved Core Global registers */ -+ struct dwc_otg_global_regs_backup *gr_backup; -+ /** Saved Host registers */ -+ struct dwc_otg_host_regs_backup *hr_backup; -+ /** Saved Device registers */ -+ struct dwc_otg_dev_regs_backup *dr_backup; -+ -+ /** Power Down Enable */ -+ uint32_t power_down; -+ -+ /** ADP support Enable */ -+ uint32_t adp_enable; -+ -+ /** ADP structure object */ -+ dwc_otg_adp_t adp; -+ -+ /** hibernation/suspend flag */ -+ int hibernation_suspend; -+ -+ /** Device mode extended hibernation flag */ -+ int xhib; -+ -+ /** OTG revision supported */ -+ uint32_t otg_ver; -+ -+ /** OTG status flag used for HNP polling */ -+ uint8_t otg_sts; -+ -+ /** Pointer to either hcd->lock or pcd->lock */ -+ dwc_spinlock_t *lock; -+ -+ /** Start predict NextEP based on Learning Queue if equal 1, -+ * also used as counter of disabled NP IN EP's */ -+ uint8_t start_predict; -+ -+ /** NextEp sequence, including EP0: nextep_seq[] = EP if non-periodic and -+ * active, 0xff otherwise */ -+ uint8_t nextep_seq[MAX_EPS_CHANNELS]; -+ -+ /** Index of fisrt EP in nextep_seq array which should be re-enabled **/ -+ uint8_t first_in_nextep_seq; -+ -+ /** Frame number while entering to ISR - needed for ISOCs **/ -+ uint32_t frame_num; -+ -+}; -+ -+#ifdef DEBUG -+/* -+ * This function is called when transfer is timed out. -+ */ -+extern void hc_xfer_timeout(void *ptr); -+#endif -+ -+/* -+ * This function is called when transfer is timed out on endpoint. -+ */ -+extern void ep_xfer_timeout(void *ptr); -+ -+/* -+ * The following functions are functions for works -+ * using during handling some interrupts -+ */ -+extern void w_conn_id_status_change(void *p); -+ -+extern void w_wakeup_detected(void *p); -+ -+/** Saves global register values into system memory. */ -+extern int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if); -+/** Saves device register values into system memory. */ -+extern int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if); -+/** Saves host register values into system memory. */ -+extern int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if); -+/** Restore global register values. */ -+extern int dwc_otg_restore_global_regs(dwc_otg_core_if_t * core_if); -+/** Restore host register values. */ -+extern int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset); -+/** Restore device register values. */ -+extern int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if, -+ int rem_wakeup); -+extern int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if); -+extern int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode, -+ int is_host); -+ -+extern int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if, -+ int restore_mode, int reset); -+extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, -+ int rem_wakeup, int reset); -+ -+/* -+ * The following functions support initialization of the CIL driver component -+ * and the DWC_otg controller. -+ */ -+extern void dwc_otg_core_host_init(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_core_dev_init(dwc_otg_core_if_t * _core_if); -+ -+/** @name Device CIL Functions -+ * The following functions support managing the DWC_otg controller in device -+ * mode. -+ */ -+/**@{*/ -+extern void dwc_otg_wakeup(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_read_setup_packet(dwc_otg_core_if_t * _core_if, -+ uint32_t * _dest); -+extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_ep0_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); -+extern void dwc_otg_ep_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); -+extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); -+extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * _core_if, -+ dwc_ep_t * _ep); -+extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * _core_if, -+ dwc_ep_t * _ep); -+extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * _core_if, -+ dwc_ep_t * _ep); -+extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * _core_if, -+ dwc_ep_t * _ep); -+extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t * _core_if, -+ dwc_ep_t * _ep, int _dma); -+extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); -+extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * _core_if, -+ dwc_ep_t * _ep); -+extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * _core_if); -+ -+#ifdef DWC_EN_ISOC -+extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * ep); -+extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * ep); -+#endif /* DWC_EN_ISOC */ -+/**@}*/ -+ -+/** @name Host CIL Functions -+ * The following functions support managing the DWC_otg controller in host -+ * mode. -+ */ -+/**@{*/ -+extern void dwc_otg_hc_init(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); -+extern void dwc_otg_hc_halt(dwc_otg_core_if_t * _core_if, -+ dwc_hc_t * _hc, dwc_otg_halt_status_e _halt_status); -+extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); -+extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * _core_if, -+ dwc_hc_t * _hc); -+extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * _core_if, -+ dwc_hc_t * _hc); -+extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); -+extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t * _core_if, -+ dwc_hc_t * _hc); -+extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * _core_if); -+ -+extern void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, -+ dwc_hc_t * hc); -+ -+extern uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if); -+ -+/* Macro used to clear one channel interrupt */ -+#define clear_hc_int(_hc_regs_, _intr_) \ -+do { \ -+ hcint_data_t hcint_clear = {.d32 = 0}; \ -+ hcint_clear.b._intr_ = 1; \ -+ DWC_WRITE_REG32(&(_hc_regs_)->hcint, hcint_clear.d32); \ -+} while (0) -+ -+/* -+ * Macro used to disable one channel interrupt. Channel interrupts are -+ * disabled when the channel is halted or released by the interrupt handler. -+ * There is no need to handle further interrupts of that type until the -+ * channel is re-assigned. In fact, subsequent handling may cause crashes -+ * because the channel structures are cleaned up when the channel is released. -+ */ -+#define disable_hc_int(_hc_regs_, _intr_) \ -+do { \ -+ hcintmsk_data_t hcintmsk = {.d32 = 0}; \ -+ hcintmsk.b._intr_ = 1; \ -+ DWC_MODIFY_REG32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \ -+} while (0) -+ -+/** -+ * This function Reads HPRT0 in preparation to modify. It keeps the -+ * WC bits 0 so that if they are read as 1, they won't clear when you -+ * write it back -+ */ -+static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t * _core_if) -+{ -+ hprt0_data_t hprt0; -+ hprt0.d32 = DWC_READ_REG32(_core_if->host_if->hprt0); -+ hprt0.b.prtena = 0; -+ hprt0.b.prtconndet = 0; -+ hprt0.b.prtenchng = 0; -+ hprt0.b.prtovrcurrchng = 0; -+ return hprt0.d32; -+} -+ -+/**@}*/ -+ -+/** @name Common CIL Functions -+ * The following functions support managing the DWC_otg controller in either -+ * device or host mode. -+ */ -+/**@{*/ -+ -+extern void dwc_otg_read_packet(dwc_otg_core_if_t * core_if, -+ uint8_t * dest, uint16_t bytes); -+ -+extern void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * _core_if, const int _num); -+extern void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_core_reset(dwc_otg_core_if_t * _core_if); -+ -+/** -+ * This function returns the Core Interrupt register. -+ */ -+static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t * core_if) -+{ -+ return (DWC_READ_REG32(&core_if->core_global_regs->gintsts) & -+ DWC_READ_REG32(&core_if->core_global_regs->gintmsk)); -+} -+ -+/** -+ * This function returns the OTG Interrupt register. -+ */ -+static inline uint32_t dwc_otg_read_otg_intr(dwc_otg_core_if_t * core_if) -+{ -+ return (DWC_READ_REG32(&core_if->core_global_regs->gotgint)); -+} -+ -+/** -+ * This function reads the Device All Endpoints Interrupt register and -+ * returns the IN endpoint interrupt bits. -+ */ -+static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t * -+ core_if) -+{ -+ -+ uint32_t v; -+ -+ if (core_if->multiproc_int_enable) { -+ v = DWC_READ_REG32(&core_if->dev_if-> -+ dev_global_regs->deachint) & -+ DWC_READ_REG32(&core_if-> -+ dev_if->dev_global_regs->deachintmsk); -+ } else { -+ v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) & -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); -+ } -+ return (v & 0xffff); -+} -+ -+/** -+ * This function reads the Device All Endpoints Interrupt register and -+ * returns the OUT endpoint interrupt bits. -+ */ -+static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t * -+ core_if) -+{ -+ uint32_t v; -+ -+ if (core_if->multiproc_int_enable) { -+ v = DWC_READ_REG32(&core_if->dev_if-> -+ dev_global_regs->deachint) & -+ DWC_READ_REG32(&core_if-> -+ dev_if->dev_global_regs->deachintmsk); -+ } else { -+ v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) & -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); -+ } -+ -+ return ((v & 0xffff0000) >> 16); -+} -+ -+/** -+ * This function returns the Device IN EP Interrupt register -+ */ -+static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * ep) -+{ -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ uint32_t v, msk, emp; -+ -+ if (core_if->multiproc_int_enable) { -+ msk = -+ DWC_READ_REG32(&dev_if-> -+ dev_global_regs->diepeachintmsk[ep->num]); -+ emp = -+ DWC_READ_REG32(&dev_if-> -+ dev_global_regs->dtknqr4_fifoemptymsk); -+ msk |= ((emp >> ep->num) & 0x1) << 7; -+ v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; -+ } else { -+ msk = DWC_READ_REG32(&dev_if->dev_global_regs->diepmsk); -+ emp = -+ DWC_READ_REG32(&dev_if-> -+ dev_global_regs->dtknqr4_fifoemptymsk); -+ msk |= ((emp >> ep->num) & 0x1) << 7; -+ v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; -+ } -+ -+ return v; -+} -+ -+/** -+ * This function returns the Device OUT EP Interrupt register -+ */ -+static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t * -+ _core_if, dwc_ep_t * _ep) -+{ -+ dwc_otg_dev_if_t *dev_if = _core_if->dev_if; -+ uint32_t v; -+ doepmsk_data_t msk = {.d32 = 0 }; -+ -+ if (_core_if->multiproc_int_enable) { -+ msk.d32 = -+ DWC_READ_REG32(&dev_if-> -+ dev_global_regs->doepeachintmsk[_ep->num]); -+ if (_core_if->pti_enh_enable) { -+ msk.b.pktdrpsts = 1; -+ } -+ v = DWC_READ_REG32(&dev_if-> -+ out_ep_regs[_ep->num]->doepint) & msk.d32; -+ } else { -+ msk.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->doepmsk); -+ if (_core_if->pti_enh_enable) { -+ msk.b.pktdrpsts = 1; -+ } -+ v = DWC_READ_REG32(&dev_if-> -+ out_ep_regs[_ep->num]->doepint) & msk.d32; -+ } -+ return v; -+} -+ -+/** -+ * This function returns the Host All Channel Interrupt register -+ */ -+static inline uint32_t dwc_otg_read_host_all_channels_intr(dwc_otg_core_if_t * -+ _core_if) -+{ -+ return (DWC_READ_REG32(&_core_if->host_if->host_global_regs->haint)); -+} -+ -+static inline uint32_t dwc_otg_read_host_channel_intr(dwc_otg_core_if_t * -+ _core_if, dwc_hc_t * _hc) -+{ -+ return (DWC_READ_REG32 -+ (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint)); -+} -+ -+/** -+ * This function returns the mode of the operation, host or device. -+ * -+ * @return 0 - Device Mode, 1 - Host Mode -+ */ -+static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t * _core_if) -+{ -+ return (DWC_READ_REG32(&_core_if->core_global_regs->gintsts) & 0x1); -+} -+ -+/**@}*/ -+ -+/** -+ * DWC_otg CIL callback structure. This structure allows the HCD and -+ * PCD to register functions used for starting and stopping the PCD -+ * and HCD for role change on for a DRD. -+ */ -+typedef struct dwc_otg_cil_callbacks { -+ /** Start function for role change */ -+ int (*start) (void *_p); -+ /** Stop Function for role change */ -+ int (*stop) (void *_p); -+ /** Disconnect Function for role change */ -+ int (*disconnect) (void *_p); -+ /** Resume/Remote wakeup Function */ -+ int (*resume_wakeup) (void *_p); -+ /** Suspend function */ -+ int (*suspend) (void *_p); -+ /** Session Start (SRP) */ -+ int (*session_start) (void *_p); -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ /** Sleep (switch to L0 state) */ -+ int (*sleep) (void *_p); -+#endif -+ /** Pointer passed to start() and stop() */ -+ void *p; -+} dwc_otg_cil_callbacks_t; -+ -+extern void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * _core_if, -+ dwc_otg_cil_callbacks_t * _cb, -+ void *_p); -+extern void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * _core_if, -+ dwc_otg_cil_callbacks_t * _cb, -+ void *_p); -+ -+void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if); -+ -+////////////////////////////////////////////////////////////////////// -+/** Start the HCD. Helper function for using the HCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_hcd_start(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->hcd_cb && core_if->hcd_cb->start) { -+ core_if->hcd_cb->start(core_if->hcd_cb->p); -+ } -+} -+ -+/** Stop the HCD. Helper function for using the HCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_hcd_stop(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->hcd_cb && core_if->hcd_cb->stop) { -+ core_if->hcd_cb->stop(core_if->hcd_cb->p); -+ } -+} -+ -+/** Disconnect the HCD. Helper function for using the HCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_hcd_disconnect(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->hcd_cb && core_if->hcd_cb->disconnect) { -+ core_if->hcd_cb->disconnect(core_if->hcd_cb->p); -+ } -+} -+ -+/** Inform the HCD the a New Session has begun. Helper function for -+ * using the HCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_hcd_session_start(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->hcd_cb && core_if->hcd_cb->session_start) { -+ core_if->hcd_cb->session_start(core_if->hcd_cb->p); -+ } -+} -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+/** -+ * Inform the HCD about LPM sleep. -+ * Helper function for using the HCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_hcd_sleep(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->hcd_cb && core_if->hcd_cb->sleep) { -+ core_if->hcd_cb->sleep(core_if->hcd_cb->p); -+ } -+} -+#endif -+ -+/** Resume the HCD. Helper function for using the HCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_hcd_resume(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->hcd_cb && core_if->hcd_cb->resume_wakeup) { -+ core_if->hcd_cb->resume_wakeup(core_if->hcd_cb->p); -+ } -+} -+ -+/** Start the PCD. Helper function for using the PCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_pcd_start(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->pcd_cb && core_if->pcd_cb->start) { -+ core_if->pcd_cb->start(core_if->pcd_cb->p); -+ } -+} -+ -+/** Stop the PCD. Helper function for using the PCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_pcd_stop(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->pcd_cb && core_if->pcd_cb->stop) { -+ core_if->pcd_cb->stop(core_if->pcd_cb->p); -+ } -+} -+ -+/** Suspend the PCD. Helper function for using the PCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_pcd_suspend(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->pcd_cb && core_if->pcd_cb->suspend) { -+ core_if->pcd_cb->suspend(core_if->pcd_cb->p); -+ } -+} -+ -+/** Resume the PCD. Helper function for using the PCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_pcd_resume(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { -+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); -+ } -+} -+ -+////////////////////////////////////////////////////////////////////// -+ -+#endif ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c -@@ -0,0 +1,1594 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $ -+ * $Revision: #32 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+/** @file -+ * -+ * The Core Interface Layer provides basic services for accessing and -+ * managing the DWC_otg hardware. These services are used by both the -+ * Host Controller Driver and the Peripheral Controller Driver. -+ * -+ * This file contains the Common Interrupt handlers. -+ */ -+#include "dwc_os.h" -+#include "dwc_otg_regs.h" -+#include "dwc_otg_cil.h" -+#include "dwc_otg_driver.h" -+#include "dwc_otg_pcd.h" -+#include "dwc_otg_hcd.h" -+ -+#ifdef DEBUG -+inline const char *op_state_str(dwc_otg_core_if_t * core_if) -+{ -+ return (core_if->op_state == A_HOST ? "a_host" : -+ (core_if->op_state == A_SUSPEND ? "a_suspend" : -+ (core_if->op_state == A_PERIPHERAL ? "a_peripheral" : -+ (core_if->op_state == B_PERIPHERAL ? "b_peripheral" : -+ (core_if->op_state == B_HOST ? "b_host" : "unknown"))))); -+} -+#endif -+ -+/** This function will log a debug message -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+int32_t dwc_otg_handle_mode_mismatch_intr(dwc_otg_core_if_t * core_if) -+{ -+ gintsts_data_t gintsts; -+ DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n", -+ dwc_otg_mode(core_if) ? "Host" : "Device"); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.modemismatch = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ return 1; -+} -+ -+/** -+ * This function handles the OTG Interrupts. It reads the OTG -+ * Interrupt Register (GOTGINT) to determine what interrupt has -+ * occurred. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ gotgint_data_t gotgint; -+ gotgctl_data_t gotgctl; -+ gintmsk_data_t gintmsk; -+ gpwrdn_data_t gpwrdn; -+ -+ gotgint.d32 = DWC_READ_REG32(&global_regs->gotgint); -+ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); -+ DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32, -+ op_state_str(core_if)); -+ -+ if (gotgint.b.sesenddet) { -+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " -+ "Session End Detected++ (%s)\n", -+ op_state_str(core_if)); -+ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); -+ -+ if (core_if->op_state == B_HOST) { -+ cil_pcd_start(core_if); -+ core_if->op_state = B_PERIPHERAL; -+ } else { -+ /* If not B_HOST and Device HNP still set. HNP -+ * Did not succeed!*/ -+ if (gotgctl.b.devhnpen) { -+ DWC_DEBUGPL(DBG_ANY, "Session End Detected\n"); -+ __DWC_ERROR("Device Not Connected/Responding!\n"); -+ } -+ -+ /* If Session End Detected the B-Cable has -+ * been disconnected. */ -+ /* Reset PCD and Gadget driver to a -+ * clean state. */ -+ core_if->lx_state = DWC_OTG_L0; -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_pcd_stop(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ -+ if (core_if->adp_enable) { -+ if (core_if->power_down == 2) { -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs-> -+ gpwrdn, gpwrdn.d32, 0); -+ } -+ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ -+ dwc_otg_adp_sense_start(core_if); -+ } -+ } -+ -+ gotgctl.d32 = 0; -+ gotgctl.b.devhnpen = 1; -+ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); -+ } -+ if (gotgint.b.sesreqsucstschng) { -+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " -+ "Session Reqeust Success Status Change++\n"); -+ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); -+ if (gotgctl.b.sesreqscs) { -+ -+ if ((core_if->core_params->phy_type == -+ DWC_PHY_TYPE_PARAM_FS) && (core_if->core_params->i2c_enable)) { -+ core_if->srp_success = 1; -+ } else { -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_pcd_resume(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ /* Clear Session Request */ -+ gotgctl.d32 = 0; -+ gotgctl.b.sesreq = 1; -+ DWC_MODIFY_REG32(&global_regs->gotgctl, -+ gotgctl.d32, 0); -+ } -+ } -+ } -+ if (gotgint.b.hstnegsucstschng) { -+ /* Print statements during the HNP interrupt handling -+ * can cause it to fail.*/ -+ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); -+ /* WA for 3.00a- HW is not setting cur_mode, even sometimes -+ * this does not help*/ -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) -+ dwc_udelay(100); -+ if (gotgctl.b.hstnegscs) { -+ if (dwc_otg_is_host_mode(core_if)) { -+ core_if->op_state = B_HOST; -+ /* -+ * Need to disable SOF interrupt immediately. -+ * When switching from device to host, the PCD -+ * interrupt handler won't handle the -+ * interrupt if host mode is already set. The -+ * HCD interrupt handler won't get called if -+ * the HCD state is HALT. This means that the -+ * interrupt does not get handled and Linux -+ * complains loudly. -+ */ -+ gintmsk.d32 = 0; -+ gintmsk.b.sofintr = 1; -+ DWC_MODIFY_REG32(&global_regs->gintmsk, -+ gintmsk.d32, 0); -+ /* Call callback function with spin lock released */ -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_pcd_stop(core_if); -+ /* -+ * Initialize the Core for Host mode. -+ */ -+ cil_hcd_start(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ core_if->op_state = B_HOST; -+ } -+ } else { -+ gotgctl.d32 = 0; -+ gotgctl.b.hnpreq = 1; -+ gotgctl.b.devhnpen = 1; -+ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); -+ DWC_DEBUGPL(DBG_ANY, "HNP Failed\n"); -+ __DWC_ERROR("Device Not Connected/Responding\n"); -+ } -+ } -+ if (gotgint.b.hstnegdet) { -+ /* The disconnect interrupt is set at the same time as -+ * Host Negotiation Detected. During the mode -+ * switch all interrupts are cleared so the disconnect -+ * interrupt handler will not get executed. -+ */ -+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " -+ "Host Negotiation Detected++ (%s)\n", -+ (dwc_otg_is_host_mode(core_if) ? "Host" : -+ "Device")); -+ if (dwc_otg_is_device_mode(core_if)) { -+ DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n", -+ core_if->op_state); -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_hcd_disconnect(core_if); -+ cil_pcd_start(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ core_if->op_state = A_PERIPHERAL; -+ } else { -+ /* -+ * Need to disable SOF interrupt immediately. When -+ * switching from device to host, the PCD interrupt -+ * handler won't handle the interrupt if host mode is -+ * already set. The HCD interrupt handler won't get -+ * called if the HCD state is HALT. This means that -+ * the interrupt does not get handled and Linux -+ * complains loudly. -+ */ -+ gintmsk.d32 = 0; -+ gintmsk.b.sofintr = 1; -+ DWC_MODIFY_REG32(&global_regs->gintmsk, gintmsk.d32, 0); -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_pcd_stop(core_if); -+ cil_hcd_start(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ core_if->op_state = A_HOST; -+ } -+ } -+ if (gotgint.b.adevtoutchng) { -+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " -+ "A-Device Timeout Change++\n"); -+ } -+ if (gotgint.b.debdone) { -+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " "Debounce Done++\n"); -+ } -+ -+ /* Clear GOTGINT */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, gotgint.d32); -+ -+ return 1; -+} -+ -+void w_conn_id_status_change(void *p) -+{ -+ dwc_otg_core_if_t *core_if = p; -+ uint32_t count = 0; -+ gotgctl_data_t gotgctl = {.d32 = 0 }; -+ -+ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+ DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32); -+ DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts); -+ -+ /* B-Device connector (Device Mode) */ -+ if (gotgctl.b.conidsts) { -+ /* Wait for switch to device mode. */ -+ while (!dwc_otg_is_device_mode(core_if)) { -+ DWC_PRINTF("Waiting for Peripheral Mode, Mode=%s\n", -+ (dwc_otg_is_host_mode(core_if) ? "Host" : -+ "Peripheral")); -+ dwc_mdelay(100); -+ if (++count > 10000) -+ break; -+ } -+ DWC_ASSERT(++count < 10000, -+ "Connection id status change timed out"); -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ } else { -+ /* A-Device connector (Host Mode) */ -+ while (!dwc_otg_is_host_mode(core_if)) { -+ DWC_PRINTF("Waiting for Host Mode, Mode=%s\n", -+ (dwc_otg_is_host_mode(core_if) ? "Host" : -+ "Peripheral")); -+ dwc_mdelay(100); -+ if (++count > 10000) -+ break; -+ } -+ DWC_ASSERT(++count < 10000, -+ "Connection id status change timed out"); -+ core_if->op_state = A_HOST; -+ /* -+ * Initialize the Core for Host mode. -+ */ -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_hcd_start(core_if); -+ } -+} -+ -+/** -+ * This function handles the Connector ID Status Change Interrupt. It -+ * reads the OTG Interrupt Register (GOTCTL) to determine whether this -+ * is a Device to Host Mode transition or a Host Mode to Device -+ * Transition. -+ * -+ * This only occurs when the cable is connected/removed from the PHY -+ * connector. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t * core_if) -+{ -+ -+ /* -+ * Need to disable SOF interrupt immediately. If switching from device -+ * to host, the PCD interrupt handler won't handle the interrupt if -+ * host mode is already set. The HCD interrupt handler won't get -+ * called if the HCD state is HALT. This means that the interrupt does -+ * not get handled and Linux complains loudly. -+ */ -+ gintmsk_data_t gintmsk = {.d32 = 0 }; -+ gintsts_data_t gintsts = {.d32 = 0 }; -+ -+ gintmsk.b.sofintr = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0); -+ -+ DWC_DEBUGPL(DBG_CIL, -+ " ++Connector ID Status Change Interrupt++ (%s)\n", -+ (dwc_otg_is_host_mode(core_if) ? "Host" : "Device")); -+ -+ DWC_SPINUNLOCK(core_if->lock); -+ -+ /* -+ * Need to schedule a work, as there are possible DELAY function calls -+ * Release lock before scheduling workq as it holds spinlock during scheduling -+ */ -+ -+ DWC_WORKQ_SCHEDULE(core_if->wq_otg, w_conn_id_status_change, -+ core_if, "connection id status change"); -+ DWC_SPINLOCK(core_if->lock); -+ -+ /* Set flag and clear interrupt */ -+ gintsts.b.conidstschng = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that a device is initiating the Session -+ * Request Protocol to request the host to turn on bus power so a new -+ * session can begin. The handler responds by turning on bus power. If -+ * the DWC_otg controller is in low power mode, the handler brings the -+ * controller out of low power mode before turning on bus power. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t * core_if) -+{ -+ gintsts_data_t gintsts; -+ -+#ifndef DWC_HOST_ONLY -+ DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n"); -+ -+ if (dwc_otg_is_device_mode(core_if)) { -+ DWC_PRINTF("SRP: Device mode\n"); -+ } else { -+ hprt0_data_t hprt0; -+ DWC_PRINTF("SRP: Host mode\n"); -+ -+ /* Turn on the port power bit. */ -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtpwr = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ -+ /* Start the Connection timer. So a message can be displayed -+ * if connect does not occur within 10 seconds. */ -+ cil_hcd_session_start(core_if); -+ } -+#endif -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.sessreqintr = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+ -+void w_wakeup_detected(void *p) -+{ -+ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) p; -+ /* -+ * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms -+ * so that OPT tests pass with all PHYs). -+ */ -+ hprt0_data_t hprt0 = {.d32 = 0 }; -+#if 0 -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ /* Restart the Phy Clock */ -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); -+ dwc_udelay(10); -+#endif //0 -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ DWC_DEBUGPL(DBG_ANY, "Resume: HPRT0=%0x\n", hprt0.d32); -+// dwc_mdelay(70); -+ hprt0.b.prtres = 0; /* Resume */ -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ DWC_DEBUGPL(DBG_ANY, "Clear Resume: HPRT0=%0x\n", -+ DWC_READ_REG32(core_if->host_if->hprt0)); -+ -+ cil_hcd_resume(core_if); -+ -+ /** Change to L0 state*/ -+ core_if->lx_state = DWC_OTG_L0; -+} -+ -+/** -+ * This interrupt indicates that the DWC_otg controller has detected a -+ * resume or remote wakeup sequence. If the DWC_otg controller is in -+ * low power mode, the handler must brings the controller out of low -+ * power mode. The controller automatically begins resume -+ * signaling. The handler schedules a time to stop resume signaling. -+ */ -+int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t * core_if) -+{ -+ gintsts_data_t gintsts; -+ -+ DWC_DEBUGPL(DBG_ANY, -+ "++Resume and Remote Wakeup Detected Interrupt++\n"); -+ -+ DWC_PRINTF("%s lxstate = %d\n", __func__, core_if->lx_state); -+ -+ if (dwc_otg_is_device_mode(core_if)) { -+ dctl_data_t dctl = {.d32 = 0 }; -+ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs-> -+ dsts)); -+ if (core_if->lx_state == DWC_OTG_L2) { -+#ifdef PARTIAL_POWER_DOWN -+ if (core_if->hwcfg4.b.power_optimiz) { -+ pcgcctl_data_t power = {.d32 = 0 }; -+ -+ power.d32 = DWC_READ_REG32(core_if->pcgcctl); -+ DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", -+ power.d32); -+ -+ power.b.stoppclk = 0; -+ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); -+ -+ power.b.pwrclmp = 0; -+ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); -+ -+ power.b.rstpdwnmodule = 0; -+ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); -+ } -+#endif -+ /* Clear the Remote Wakeup Signaling */ -+ dctl.b.rmtwkupsig = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ dctl, dctl.d32, 0); -+ -+ DWC_SPINUNLOCK(core_if->lock); -+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { -+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); -+ } -+ DWC_SPINLOCK(core_if->lock); -+ } else { -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ lpmcfg.b.hird_thres &= (~(1 << 4)); -+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, -+ lpmcfg.d32); -+ } -+ /** Change to L0 state*/ -+ core_if->lx_state = DWC_OTG_L0; -+ } else { -+ if (core_if->lx_state != DWC_OTG_L1) { -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ -+ /* Restart the Phy Clock */ -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); -+ DWC_TIMER_SCHEDULE(core_if->wkp_timer, 71); -+ } else { -+ /** Change to L0 state*/ -+ core_if->lx_state = DWC_OTG_L0; -+ } -+ } -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.wkupintr = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that the Wakeup Logic has detected a -+ * Device disconnect. -+ */ -+static int32_t dwc_otg_handle_pwrdn_disconnect_intr(dwc_otg_core_if_t *core_if) -+{ -+ gpwrdn_data_t gpwrdn = { .d32 = 0 }; -+ gpwrdn_data_t gpwrdn_temp = { .d32 = 0 }; -+ gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ -+ DWC_PRINTF("%s called\n", __FUNCTION__); -+ -+ if (!core_if->hibernation_suspend) { -+ DWC_PRINTF("Already exited from Hibernation\n"); -+ return 1; -+ } -+ -+ /* Switch on the voltage to the core */ -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Reset the core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Disable power clamps*/ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Remove reset the core signal */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable PMU interrupt */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ core_if->hibernation_suspend = 0; -+ -+ /* Disable PMU */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ if (gpwrdn_temp.b.idsts) { -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ } else { -+ core_if->op_state = A_HOST; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_hcd_start(core_if); -+ } -+ -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that the Wakeup Logic has detected a -+ * remote wakeup sequence. -+ */ -+static int32_t dwc_otg_handle_pwrdn_wakeup_detected_intr(dwc_otg_core_if_t * core_if) -+{ -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ DWC_DEBUGPL(DBG_ANY, -+ "++Powerdown Remote Wakeup Detected Interrupt++\n"); -+ -+ if (!core_if->hibernation_suspend) { -+ DWC_PRINTF("Already exited from Hibernation\n"); -+ return 1; -+ } -+ -+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ if (gpwrdn.b.idsts) { // Device Mode -+ if ((core_if->power_down == 2) -+ && (core_if->hibernation_suspend == 1)) { -+ dwc_otg_device_hibernation_restore(core_if, 0, 0); -+ } -+ } else { -+ if ((core_if->power_down == 2) -+ && (core_if->hibernation_suspend == 1)) { -+ dwc_otg_host_hibernation_restore(core_if, 1, 0); -+ } -+ } -+ return 1; -+} -+ -+static int32_t dwc_otg_handle_pwrdn_idsts_change(dwc_otg_device_t *otg_dev) -+{ -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ gpwrdn_data_t gpwrdn_temp = {.d32 = 0 }; -+ dwc_otg_core_if_t *core_if = otg_dev->core_if; -+ -+ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__); -+ gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ if (core_if->power_down == 2) { -+ if (!core_if->hibernation_suspend) { -+ DWC_PRINTF("Already exited from Hibernation\n"); -+ return 1; -+ } -+ DWC_DEBUGPL(DBG_ANY, "Exit from hibernation on ID sts change\n"); -+ /* Switch on the voltage to the core */ -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Reset the core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Disable power clamps */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Remove reset the core signal */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable PMU interrupt */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /*Indicates that we are exiting from hibernation */ -+ core_if->hibernation_suspend = 0; -+ -+ /* Disable PMU */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ gpwrdn.d32 = core_if->gr_backup->gpwrdn_local; -+ if (gpwrdn.b.dis_vbus == 1) { -+ gpwrdn.d32 = 0; -+ gpwrdn.b.dis_vbus = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ } -+ -+ if (gpwrdn_temp.b.idsts) { -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ } else { -+ core_if->op_state = A_HOST; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_hcd_start(core_if); -+ } -+ } -+ -+ if (core_if->adp_enable) { -+ uint8_t is_host = 0; -+ DWC_SPINUNLOCK(core_if->lock); -+ /* Change the core_if's lock to hcd/pcd lock depend on mode? */ -+#ifndef DWC_HOST_ONLY -+ if (gpwrdn_temp.b.idsts) -+ core_if->lock = otg_dev->pcd->lock; -+#endif -+#ifndef DWC_DEVICE_ONLY -+ if (!gpwrdn_temp.b.idsts) { -+ core_if->lock = otg_dev->hcd->lock; -+ is_host = 1; -+ } -+#endif -+ DWC_PRINTF("RESTART ADP\n"); -+ if (core_if->adp.probe_enabled) -+ dwc_otg_adp_probe_stop(core_if); -+ if (core_if->adp.sense_enabled) -+ dwc_otg_adp_sense_stop(core_if); -+ if (core_if->adp.sense_timer_started) -+ DWC_TIMER_CANCEL(core_if->adp.sense_timer); -+ if (core_if->adp.vbuson_timer_started) -+ DWC_TIMER_CANCEL(core_if->adp.vbuson_timer); -+ core_if->adp.probe_timer_values[0] = -1; -+ core_if->adp.probe_timer_values[1] = -1; -+ core_if->adp.sense_timer_started = 0; -+ core_if->adp.vbuson_timer_started = 0; -+ core_if->adp.probe_counter = 0; -+ core_if->adp.gpwrdn = 0; -+ -+ /* Disable PMU and restart ADP */ -+ gpwrdn_temp.d32 = 0; -+ gpwrdn_temp.b.pmuactv = 1; -+ gpwrdn_temp.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ DWC_PRINTF("Check point 1\n"); -+ dwc_mdelay(110); -+ dwc_otg_adp_start(core_if, is_host); -+ DWC_SPINLOCK(core_if->lock); -+ } -+ -+ -+ return 1; -+} -+ -+static int32_t dwc_otg_handle_pwrdn_session_change(dwc_otg_core_if_t * core_if) -+{ -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ int32_t otg_cap_param = core_if->core_params->otg_cap; -+ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__); -+ -+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ if (core_if->power_down == 2) { -+ if (!core_if->hibernation_suspend) { -+ DWC_PRINTF("Already exited from Hibernation\n"); -+ return 1; -+ } -+ -+ if ((otg_cap_param != DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE || -+ otg_cap_param != DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) && -+ gpwrdn.b.bsessvld == 0) { -+ /* Save gpwrdn register for further usage if stschng interrupt */ -+ core_if->gr_backup->gpwrdn_local = -+ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ /*Exit from ISR and wait for stschng interrupt with bsessvld = 1 */ -+ return 1; -+ } -+ -+ /* Switch on the voltage to the core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Reset the core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Disable power clamps */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Remove reset the core signal */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable PMU interrupt */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /*Indicates that we are exiting from hibernation */ -+ core_if->hibernation_suspend = 0; -+ -+ /* Disable PMU */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ -+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE || -+ otg_cap_param == DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) { -+ /* -+ * Initiate SRP after initial ADP probe. -+ */ -+ dwc_otg_initiate_srp(core_if); -+ } -+ } -+ -+ return 1; -+} -+/** -+ * This interrupt indicates that the Wakeup Logic has detected a -+ * status change either on IDDIG or BSessVld. -+ */ -+static uint32_t dwc_otg_handle_pwrdn_stschng_intr(dwc_otg_device_t *otg_dev) -+{ -+ int retval; -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ gpwrdn_data_t gpwrdn_temp = {.d32 = 0 }; -+ dwc_otg_core_if_t *core_if = otg_dev->core_if; -+ -+ DWC_PRINTF("%s called\n", __FUNCTION__); -+ -+ if (core_if->power_down == 2) { -+ if (core_if->hibernation_suspend <= 0) { -+ DWC_PRINTF("Already exited from Hibernation\n"); -+ return 1; -+ } else -+ gpwrdn_temp.d32 = core_if->gr_backup->gpwrdn_local; -+ -+ } else { -+ gpwrdn_temp.d32 = core_if->adp.gpwrdn; -+ } -+ -+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ -+ if (gpwrdn.b.idsts ^ gpwrdn_temp.b.idsts) { -+ retval = dwc_otg_handle_pwrdn_idsts_change(otg_dev); -+ } else if (gpwrdn.b.bsessvld ^ gpwrdn_temp.b.bsessvld) { -+ retval = dwc_otg_handle_pwrdn_session_change(core_if); -+ } -+ -+ return retval; -+} -+ -+/** -+ * This interrupt indicates that the Wakeup Logic has detected a -+ * SRP. -+ */ -+static int32_t dwc_otg_handle_pwrdn_srp_intr(dwc_otg_core_if_t * core_if) -+{ -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ -+ DWC_PRINTF("%s called\n", __FUNCTION__); -+ -+ if (!core_if->hibernation_suspend) { -+ DWC_PRINTF("Already exited from Hibernation\n"); -+ return 1; -+ } -+#ifdef DWC_DEV_SRPCAP -+ if (core_if->pwron_timer_started) { -+ core_if->pwron_timer_started = 0; -+ DWC_TIMER_CANCEL(core_if->pwron_timer); -+ } -+#endif -+ -+ /* Switch on the voltage to the core */ -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Reset the core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Disable power clamps */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Remove reset the core signal */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable PMU interrupt */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Indicates that we are exiting from hibernation */ -+ core_if->hibernation_suspend = 0; -+ -+ /* Disable PMU */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Programm Disable VBUS to 0 */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.dis_vbus = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /*Initialize the core as Host */ -+ core_if->op_state = A_HOST; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_hcd_start(core_if); -+ -+ return 1; -+} -+ -+/** This interrupt indicates that restore command after Hibernation -+ * was completed by the core. */ -+int32_t dwc_otg_handle_restore_done_intr(dwc_otg_core_if_t * core_if) -+{ -+ pcgcctl_data_t pcgcctl; -+ DWC_DEBUGPL(DBG_ANY, "++Restore Done Interrupt++\n"); -+ -+ //TODO De-assert restore signal. 8.a -+ pcgcctl.d32 = DWC_READ_REG32(core_if->pcgcctl); -+ if (pcgcctl.b.restoremode == 1) { -+ gintmsk_data_t gintmsk = {.d32 = 0 }; -+ /* -+ * If restore mode is Remote Wakeup, -+ * unmask Remote Wakeup interrupt. -+ */ -+ gintmsk.b.wkupintr = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, -+ 0, gintmsk.d32); -+ } -+ -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that a device has been disconnected from -+ * the root port. -+ */ -+int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t * core_if) -+{ -+ gintsts_data_t gintsts; -+ -+ DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n", -+ (dwc_otg_is_host_mode(core_if) ? "Host" : "Device"), -+ op_state_str(core_if)); -+ -+/** @todo Consolidate this if statement. */ -+#ifndef DWC_HOST_ONLY -+ if (core_if->op_state == B_HOST) { -+ /* If in device mode Disconnect and stop the HCD, then -+ * start the PCD. */ -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_hcd_disconnect(core_if); -+ cil_pcd_start(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ core_if->op_state = B_PERIPHERAL; -+ } else if (dwc_otg_is_device_mode(core_if)) { -+ gotgctl_data_t gotgctl = {.d32 = 0 }; -+ gotgctl.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+ if (gotgctl.b.hstsethnpen == 1) { -+ /* Do nothing, if HNP in process the OTG -+ * interrupt "Host Negotiation Detected" -+ * interrupt will do the mode switch. -+ */ -+ } else if (gotgctl.b.devhnpen == 0) { -+ /* If in device mode Disconnect and stop the HCD, then -+ * start the PCD. */ -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_hcd_disconnect(core_if); -+ cil_pcd_start(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ core_if->op_state = B_PERIPHERAL; -+ } else { -+ DWC_DEBUGPL(DBG_ANY, "!a_peripheral && !devhnpen\n"); -+ } -+ } else { -+ if (core_if->op_state == A_HOST) { -+ /* A-Cable still connected but device disconnected. */ -+ cil_hcd_disconnect(core_if); -+ if (core_if->adp_enable) { -+ gpwrdn_data_t gpwrdn = { .d32 = 0 }; -+ cil_hcd_stop(core_if); -+ /* Enable Power Down Logic */ -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_otg_adp_probe_start(core_if); -+ -+ /* Power off the core */ -+ if (core_if->power_down == 2) { -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32 -+ (&core_if->core_global_regs->gpwrdn, -+ gpwrdn.d32, 0); -+ } -+ } -+ } -+ } -+#endif -+ /* Change to L3(OFF) state */ -+ core_if->lx_state = DWC_OTG_L3; -+ -+ gintsts.d32 = 0; -+ gintsts.b.disconnect = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that SUSPEND state has been detected on -+ * the USB. -+ * -+ * For HNP the USB Suspend interrupt signals the change from -+ * "a_peripheral" to "a_host". -+ * -+ * When power management is enabled the core will be put in low power -+ * mode. -+ */ -+int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t * core_if) -+{ -+ dsts_data_t dsts; -+ gintsts_data_t gintsts; -+ dcfg_data_t dcfg; -+ -+ DWC_DEBUGPL(DBG_ANY, "USB SUSPEND\n"); -+ -+ if (dwc_otg_is_device_mode(core_if)) { -+ /* Check the Device status register to determine if the Suspend -+ * state is active. */ -+ dsts.d32 = -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32); -+ DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d " -+ "HWCFG4.power Optimize=%d\n", -+ dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz); -+ -+#ifdef PARTIAL_POWER_DOWN -+/** @todo Add a module parameter for power management. */ -+ -+ if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) { -+ pcgcctl_data_t power = {.d32 = 0 }; -+ DWC_DEBUGPL(DBG_CIL, "suspend\n"); -+ -+ power.b.pwrclmp = 1; -+ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); -+ -+ power.b.rstpdwnmodule = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32); -+ -+ power.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32); -+ -+ } else { -+ DWC_DEBUGPL(DBG_ANY, "disconnect?\n"); -+ } -+#endif -+ /* PCD callback for suspend. Release the lock inside of callback function */ -+ cil_pcd_suspend(core_if); -+ if (core_if->power_down == 2) -+ { -+ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); -+ DWC_DEBUGPL(DBG_ANY,"lx_state = %08x\n",core_if->lx_state); -+ DWC_DEBUGPL(DBG_ANY," device address = %08d\n",dcfg.b.devaddr); -+ -+ if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) { -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ gusbcfg_data_t gusbcfg = {.d32 = 0 }; -+ -+ /* Change to L2(suspend) state */ -+ core_if->lx_state = DWC_OTG_L2; -+ -+ /* Clear interrupt in gintsts */ -+ gintsts.d32 = 0; -+ gintsts.b.usbsuspend = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs-> -+ gintsts, gintsts.d32); -+ DWC_PRINTF("Start of hibernation completed\n"); -+ dwc_otg_save_global_regs(core_if); -+ dwc_otg_save_dev_regs(core_if); -+ -+ gusbcfg.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs-> -+ gusbcfg); -+ if (gusbcfg.b.ulpi_utmi_sel == 1) { -+ /* ULPI interface */ -+ /* Suspend the Phy Clock */ -+ pcgcctl.d32 = 0; -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, -+ pcgcctl.d32); -+ dwc_udelay(10); -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ } else { -+ /* UTMI+ Interface */ -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, -+ pcgcctl.d32); -+ dwc_udelay(10); -+ } -+ -+ /* Set flag to indicate that we are in hibernation */ -+ core_if->hibernation_suspend = 1; -+ /* Enable interrupts from wake up logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Unmask device mode interrupts in GPWRDN */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.rst_det_msk = 1; -+ gpwrdn.b.lnstchng_msk = 1; -+ gpwrdn.b.sts_chngint_msk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Enable Power Down Clamp */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Switch off VDD */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ -+ /* Save gpwrdn register for further usage if stschng interrupt */ -+ core_if->gr_backup->gpwrdn_local = -+ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ DWC_PRINTF("Hibernation completed\n"); -+ -+ return 1; -+ } -+ } else if (core_if->power_down == 3) { -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); -+ DWC_DEBUGPL(DBG_ANY, "lx_state = %08x\n",core_if->lx_state); -+ DWC_DEBUGPL(DBG_ANY, " device address = %08d\n",dcfg.b.devaddr); -+ -+ if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) { -+ DWC_DEBUGPL(DBG_ANY, "Start entering to extended hibernation\n"); -+ core_if->xhib = 1; -+ -+ /* Clear interrupt in gintsts */ -+ gintsts.d32 = 0; -+ gintsts.b.usbsuspend = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs-> -+ gintsts, gintsts.d32); -+ -+ dwc_otg_save_global_regs(core_if); -+ dwc_otg_save_dev_regs(core_if); -+ -+ /* Wait for 10 PHY clocks */ -+ dwc_udelay(10); -+ -+ /* Program GPIO register while entering to xHib */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x1); -+ -+ pcgcctl.b.enbl_extnd_hiber = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); -+ -+ pcgcctl.d32 = 0; -+ pcgcctl.b.extnd_hiber_pwrclmp = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); -+ -+ pcgcctl.d32 = 0; -+ pcgcctl.b.extnd_hiber_switch = 1; -+ core_if->gr_backup->xhib_gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ core_if->gr_backup->xhib_pcgcctl = DWC_READ_REG32(core_if->pcgcctl) | pcgcctl.d32; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); -+ -+ DWC_DEBUGPL(DBG_ANY, "Finished entering to extended hibernation\n"); -+ -+ return 1; -+ } -+ } -+ } else { -+ if (core_if->op_state == A_PERIPHERAL) { -+ DWC_DEBUGPL(DBG_ANY, "a_peripheral->a_host\n"); -+ /* Clear the a_peripheral flag, back to a_host. */ -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_pcd_stop(core_if); -+ cil_hcd_start(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ core_if->op_state = A_HOST; -+ } -+ } -+ -+ /* Change to L2(suspend) state */ -+ core_if->lx_state = DWC_OTG_L2; -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.usbsuspend = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+ -+static int32_t dwc_otg_handle_xhib_exit_intr(dwc_otg_core_if_t * core_if) -+{ -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ gahbcfg_data_t gahbcfg = {.d32 = 0 }; -+ -+ dwc_udelay(10); -+ -+ /* Program GPIO register while entering to xHib */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x0); -+ -+ pcgcctl.d32 = core_if->gr_backup->xhib_pcgcctl; -+ pcgcctl.b.extnd_hiber_pwrclmp = 0; -+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); -+ dwc_udelay(10); -+ -+ gpwrdn.d32 = core_if->gr_backup->xhib_gpwrdn; -+ gpwrdn.b.restore = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ restore_lpm_i2c_regs(core_if); -+ -+ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14); -+ pcgcctl.b.max_xcvrselect = 1; -+ pcgcctl.b.ess_reg_restored = 0; -+ pcgcctl.b.extnd_hiber_switch = 0; -+ pcgcctl.b.extnd_hiber_pwrclmp = 0; -+ pcgcctl.b.enbl_extnd_hiber = 1; -+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); -+ -+ gahbcfg.d32 = core_if->gr_backup->gahbcfg_local; -+ gahbcfg.b.glblintrmsk = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32); -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0x1 << 16); -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, -+ core_if->gr_backup->gusbcfg_local); -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, -+ core_if->dr_backup->dcfg); -+ -+ pcgcctl.d32 = 0; -+ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14); -+ pcgcctl.b.max_xcvrselect = 1; -+ pcgcctl.d32 |= 0x608; -+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); -+ dwc_udelay(10); -+ -+ pcgcctl.d32 = 0; -+ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14); -+ pcgcctl.b.max_xcvrselect = 1; -+ pcgcctl.b.ess_reg_restored = 1; -+ pcgcctl.b.enbl_extnd_hiber = 1; -+ pcgcctl.b.rstpdwnmodule = 1; -+ pcgcctl.b.restoremode = 1; -+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); -+ -+ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__); -+ -+ return 1; -+} -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+/** -+ * This function hadles LPM transaction received interrupt. -+ */ -+static int32_t dwc_otg_handle_lpm_intr(dwc_otg_core_if_t * core_if) -+{ -+ glpmcfg_data_t lpmcfg; -+ gintsts_data_t gintsts; -+ -+ if (!core_if->core_params->lpm_enable) { -+ DWC_PRINTF("Unexpected LPM interrupt\n"); -+ } -+ -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ DWC_PRINTF("LPM config register = 0x%08x\n", lpmcfg.d32); -+ -+ if (dwc_otg_is_host_mode(core_if)) { -+ cil_hcd_sleep(core_if); -+ } else { -+ lpmcfg.b.hird_thres |= (1 << 4); -+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, -+ lpmcfg.d32); -+ } -+ -+ /* Examine prt_sleep_sts after TL1TokenTetry period max (10 us) */ -+ dwc_udelay(10); -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ if (lpmcfg.b.prt_sleep_sts) { -+ /* Save the current state */ -+ core_if->lx_state = DWC_OTG_L1; -+ } -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.lpmtranrcvd = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ return 1; -+} -+#endif /* CONFIG_USB_DWC_OTG_LPM */ -+ -+/** -+ * This function returns the Core Interrupt register. -+ */ -+static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t * core_if, gintmsk_data_t *reenable_gintmsk, dwc_otg_hcd_t *hcd) -+{ -+ gahbcfg_data_t gahbcfg = {.d32 = 0 }; -+ gintsts_data_t gintsts; -+ gintmsk_data_t gintmsk; -+ gintmsk_data_t gintmsk_common = {.d32 = 0 }; -+ gintmsk_common.b.wkupintr = 1; -+ gintmsk_common.b.sessreqintr = 1; -+ gintmsk_common.b.conidstschng = 1; -+ gintmsk_common.b.otgintr = 1; -+ gintmsk_common.b.modemismatch = 1; -+ gintmsk_common.b.disconnect = 1; -+ gintmsk_common.b.usbsuspend = 1; -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ gintmsk_common.b.lpmtranrcvd = 1; -+#endif -+ gintmsk_common.b.restoredone = 1; -+ if(dwc_otg_is_device_mode(core_if)) -+ { -+ /** @todo: The port interrupt occurs while in device -+ * mode. Added code to CIL to clear the interrupt for now! -+ */ -+ gintmsk_common.b.portintr = 1; -+ } -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); -+ if(fiq_enable) { -+ local_fiq_disable(); -+ /* Pull in the interrupts that the FIQ has masked */ -+ gintmsk.d32 |= ~(hcd->fiq_state->gintmsk_saved.d32); -+ gintmsk.d32 |= gintmsk_common.d32; -+ /* for the upstairs function to reenable - have to read it here in case FIQ triggers again */ -+ reenable_gintmsk->d32 = gintmsk.d32; -+ local_fiq_enable(); -+ } -+ -+ gahbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg); -+ -+#ifdef DEBUG -+ /* if any common interrupts set */ -+ if (gintsts.d32 & gintmsk_common.d32) { -+ DWC_DEBUGPL(DBG_ANY, "common_intr: gintsts=%08x gintmsk=%08x\n", -+ gintsts.d32, gintmsk.d32); -+ } -+#endif -+ if (!fiq_enable){ -+ if (gahbcfg.b.glblintrmsk) -+ return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32); -+ else -+ return 0; -+ } else { -+ /* Our IRQ kicker is no longer the USB hardware, it's the MPHI interface. -+ * Can't trust the global interrupt mask bit in this case. -+ */ -+ return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32); -+ } -+ -+} -+ -+/* MACRO for clearing interupt bits in GPWRDN register */ -+#define CLEAR_GPWRDN_INTR(__core_if,__intr) \ -+do { \ -+ gpwrdn_data_t gpwrdn = {.d32=0}; \ -+ gpwrdn.b.__intr = 1; \ -+ DWC_MODIFY_REG32(&__core_if->core_global_regs->gpwrdn, \ -+ 0, gpwrdn.d32); \ -+} while (0) -+ -+/** -+ * Common interrupt handler. -+ * -+ * The common interrupts are those that occur in both Host and Device mode. -+ * This handler handles the following interrupts: -+ * - Mode Mismatch Interrupt -+ * - Disconnect Interrupt -+ * - OTG Interrupt -+ * - Connector ID Status Change Interrupt -+ * - Session Request Interrupt. -+ * - Resume / Remote Wakeup Detected Interrupt. -+ * - LPM Transaction Received Interrupt -+ * - ADP Transaction Received Interrupt -+ * -+ */ -+int32_t dwc_otg_handle_common_intr(void *dev) -+{ -+ int retval = 0; -+ gintsts_data_t gintsts; -+ gintmsk_data_t gintmsk_reenable = { .d32 = 0 }; -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ dwc_otg_device_t *otg_dev = dev; -+ dwc_otg_core_if_t *core_if = otg_dev->core_if; -+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ if (dwc_otg_is_device_mode(core_if)) -+ core_if->frame_num = dwc_otg_get_frame_number(core_if); -+ -+ if (core_if->lock) -+ DWC_SPINLOCK(core_if->lock); -+ -+ if (core_if->power_down == 3 && core_if->xhib == 1) { -+ DWC_DEBUGPL(DBG_ANY, "Exiting from xHIB state\n"); -+ retval |= dwc_otg_handle_xhib_exit_intr(core_if); -+ core_if->xhib = 2; -+ if (core_if->lock) -+ DWC_SPINUNLOCK(core_if->lock); -+ -+ return retval; -+ } -+ -+ if (core_if->hibernation_suspend <= 0) { -+ /* read_common will have to poke the FIQ's saved mask. We must then clear this mask at the end -+ * of this handler - god only knows why it's done like this -+ */ -+ gintsts.d32 = dwc_otg_read_common_intr(core_if, &gintmsk_reenable, otg_dev->hcd); -+ -+ if (gintsts.b.modemismatch) { -+ retval |= dwc_otg_handle_mode_mismatch_intr(core_if); -+ } -+ if (gintsts.b.otgintr) { -+ retval |= dwc_otg_handle_otg_intr(core_if); -+ } -+ if (gintsts.b.conidstschng) { -+ retval |= -+ dwc_otg_handle_conn_id_status_change_intr(core_if); -+ } -+ if (gintsts.b.disconnect) { -+ retval |= dwc_otg_handle_disconnect_intr(core_if); -+ } -+ if (gintsts.b.sessreqintr) { -+ retval |= dwc_otg_handle_session_req_intr(core_if); -+ } -+ if (gintsts.b.wkupintr) { -+ retval |= dwc_otg_handle_wakeup_detected_intr(core_if); -+ } -+ if (gintsts.b.usbsuspend) { -+ retval |= dwc_otg_handle_usb_suspend_intr(core_if); -+ } -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ if (gintsts.b.lpmtranrcvd) { -+ retval |= dwc_otg_handle_lpm_intr(core_if); -+ } -+#endif -+ if (gintsts.b.restoredone) { -+ gintsts.d32 = 0; -+ if (core_if->power_down == 2) -+ core_if->hibernation_suspend = -1; -+ else if (core_if->power_down == 3 && core_if->xhib == 2) { -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ dctl_data_t dctl = {.d32 = 0 }; -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs-> -+ gintsts, 0xFFFFFFFF); -+ -+ DWC_DEBUGPL(DBG_ANY, -+ "RESTORE DONE generated\n"); -+ -+ gpwrdn.b.restore = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ pcgcctl.b.rstpdwnmodule = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, core_if->gr_backup->gusbcfg_local); -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, core_if->dr_backup->dcfg); -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, core_if->dr_backup->dctl); -+ dwc_udelay(50); -+ -+ dctl.b.pwronprgdone = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); -+ dwc_udelay(10); -+ -+ dwc_otg_restore_global_regs(core_if); -+ dwc_otg_restore_dev_regs(core_if, 0); -+ -+ dctl.d32 = 0; -+ dctl.b.pwronprgdone = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0); -+ dwc_udelay(10); -+ -+ pcgcctl.d32 = 0; -+ pcgcctl.b.enbl_extnd_hiber = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); -+ -+ /* The core will be in ON STATE */ -+ core_if->lx_state = DWC_OTG_L0; -+ core_if->xhib = 0; -+ -+ DWC_SPINUNLOCK(core_if->lock); -+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { -+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); -+ } -+ DWC_SPINLOCK(core_if->lock); -+ -+ } -+ -+ gintsts.b.restoredone = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32); -+ DWC_PRINTF(" --Restore done interrupt received-- \n"); -+ retval |= 1; -+ } -+ if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) { -+ /* The port interrupt occurs while in device mode with HPRT0 -+ * Port Enable/Disable. -+ */ -+ gintsts.d32 = 0; -+ gintsts.b.portintr = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32); -+ retval |= 1; -+ gintmsk_reenable.b.portintr = 1; -+ -+ } -+ /* Did we actually handle anything? if so, unmask the interrupt */ -+// fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "CILOUT %1d", retval); -+// fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "%08x", gintsts.d32); -+// fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "%08x", gintmsk_reenable.d32); -+ if (retval && fiq_enable) { -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk_reenable.d32); -+ } -+ -+ } else { -+ DWC_DEBUGPL(DBG_ANY, "gpwrdn=%08x\n", gpwrdn.d32); -+ -+ if (gpwrdn.b.disconn_det && gpwrdn.b.disconn_det_msk) { -+ CLEAR_GPWRDN_INTR(core_if, disconn_det); -+ if (gpwrdn.b.linestate == 0) { -+ dwc_otg_handle_pwrdn_disconnect_intr(core_if); -+ } else { -+ DWC_PRINTF("Disconnect detected while linestate is not 0\n"); -+ } -+ -+ retval |= 1; -+ } -+ if (gpwrdn.b.lnstschng && gpwrdn.b.lnstchng_msk) { -+ CLEAR_GPWRDN_INTR(core_if, lnstschng); -+ /* remote wakeup from hibernation */ -+ if (gpwrdn.b.linestate == 2 || gpwrdn.b.linestate == 1) { -+ dwc_otg_handle_pwrdn_wakeup_detected_intr(core_if); -+ } else { -+ DWC_PRINTF("gpwrdn.linestate = %d\n", gpwrdn.b.linestate); -+ } -+ retval |= 1; -+ } -+ if (gpwrdn.b.rst_det && gpwrdn.b.rst_det_msk) { -+ CLEAR_GPWRDN_INTR(core_if, rst_det); -+ if (gpwrdn.b.linestate == 0) { -+ DWC_PRINTF("Reset detected\n"); -+ retval |= dwc_otg_device_hibernation_restore(core_if, 0, 1); -+ } -+ } -+ if (gpwrdn.b.srp_det && gpwrdn.b.srp_det_msk) { -+ CLEAR_GPWRDN_INTR(core_if, srp_det); -+ dwc_otg_handle_pwrdn_srp_intr(core_if); -+ retval |= 1; -+ } -+ } -+ /* Handle ADP interrupt here */ -+ if (gpwrdn.b.adp_int) { -+ DWC_PRINTF("ADP interrupt\n"); -+ CLEAR_GPWRDN_INTR(core_if, adp_int); -+ dwc_otg_adp_handle_intr(core_if); -+ retval |= 1; -+ } -+ if (gpwrdn.b.sts_chngint && gpwrdn.b.sts_chngint_msk) { -+ DWC_PRINTF("STS CHNG interrupt asserted\n"); -+ CLEAR_GPWRDN_INTR(core_if, sts_chngint); -+ dwc_otg_handle_pwrdn_stschng_intr(otg_dev); -+ -+ retval |= 1; -+ } -+ if (core_if->lock) -+ DWC_SPINUNLOCK(core_if->lock); -+ return retval; -+} ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_core_if.h -@@ -0,0 +1,705 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_core_if.h $ -+ * $Revision: #13 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#if !defined(__DWC_CORE_IF_H__) -+#define __DWC_CORE_IF_H__ -+ -+#include "dwc_os.h" -+ -+/** @file -+ * This file defines DWC_OTG Core API -+ */ -+ -+struct dwc_otg_core_if; -+typedef struct dwc_otg_core_if dwc_otg_core_if_t; -+ -+/** Maximum number of Periodic FIFOs */ -+#define MAX_PERIO_FIFOS 15 -+/** Maximum number of Periodic FIFOs */ -+#define MAX_TX_FIFOS 15 -+ -+/** Maximum number of Endpoints/HostChannels */ -+#define MAX_EPS_CHANNELS 16 -+ -+extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * _reg_base_addr); -+extern void dwc_otg_core_init(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_cil_remove(dwc_otg_core_if_t * _core_if); -+ -+extern void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * _core_if); -+ -+extern uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if); -+extern uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if); -+ -+extern uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if); -+ -+/** This function should be called on every hardware interrupt. */ -+extern int32_t dwc_otg_handle_common_intr(void *otg_dev); -+ -+/** @name OTG Core Parameters */ -+/** @{ */ -+ -+/** -+ * Specifies the OTG capabilities. The driver will automatically -+ * detect the value for this parameter if none is specified. -+ * 0 - HNP and SRP capable (default) -+ * 1 - SRP Only capable -+ * 2 - No HNP/SRP capable -+ */ -+extern int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val); -+extern int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if); -+#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0 -+#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1 -+#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2 -+#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE -+ -+extern int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val); -+extern int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if); -+#define dwc_param_opt_default 1 -+ -+/** -+ * Specifies whether to use slave or DMA mode for accessing the data -+ * FIFOs. The driver will automatically detect the value for this -+ * parameter if none is specified. -+ * 0 - Slave -+ * 1 - DMA (default, if available) -+ */ -+extern int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if); -+#define dwc_param_dma_enable_default 1 -+ -+/** -+ * When DMA mode is enabled specifies whether to use -+ * address DMA or DMA Descritor mode for accessing the data -+ * FIFOs in device mode. The driver will automatically detect -+ * the value for this parameter if none is specified. -+ * 0 - address DMA -+ * 1 - DMA Descriptor(default, if available) -+ */ -+extern int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if); -+//#define dwc_param_dma_desc_enable_default 1 -+#define dwc_param_dma_desc_enable_default 0 // Broadcom BCM2708 -+ -+/** The DMA Burst size (applicable only for External DMA -+ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) -+ */ -+extern int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if); -+#define dwc_param_dma_burst_size_default 32 -+ -+/** -+ * Specifies the maximum speed of operation in host and device mode. -+ * The actual speed depends on the speed of the attached device and -+ * the value of phy_type. The actual speed depends on the speed of the -+ * attached device. -+ * 0 - High Speed (default) -+ * 1 - Full Speed -+ */ -+extern int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val); -+extern int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if); -+#define dwc_param_speed_default 0 -+#define DWC_SPEED_PARAM_HIGH 0 -+#define DWC_SPEED_PARAM_FULL 1 -+ -+/** Specifies whether low power mode is supported when attached -+ * to a Full Speed or Low Speed device in host mode. -+ * 0 - Don't support low power mode (default) -+ * 1 - Support low power mode -+ */ -+extern int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * -+ core_if, int32_t val); -+extern int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t -+ * core_if); -+#define dwc_param_host_support_fs_ls_low_power_default 0 -+ -+/** Specifies the PHY clock rate in low power mode when connected to a -+ * Low Speed device in host mode. This parameter is applicable only if -+ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS -+ * then defaults to 6 MHZ otherwise 48 MHZ. -+ * -+ * 0 - 48 MHz -+ * 1 - 6 MHz -+ */ -+extern int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * -+ core_if, int32_t val); -+extern int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * -+ core_if); -+#define dwc_param_host_ls_low_power_phy_clk_default 0 -+#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0 -+#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1 -+ -+/** -+ * 0 - Use cC FIFO size parameters -+ * 1 - Allow dynamic FIFO sizing (default) -+ */ -+extern int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t * -+ core_if); -+#define dwc_param_enable_dynamic_fifo_default 1 -+ -+/** Total number of 4-byte words in the data FIFO memory. This -+ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic -+ * Tx FIFOs. -+ * 32 to 32768 (default 8192) -+ * Note: The total FIFO memory depth in the FPGA configuration is 8192. -+ */ -+extern int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if); -+//#define dwc_param_data_fifo_size_default 8192 -+#define dwc_param_data_fifo_size_default 0xFF0 // Broadcom BCM2708 -+ -+/** Number of 4-byte words in the Rx FIFO in device mode when dynamic -+ * FIFO sizing is enabled. -+ * 16 to 32768 (default 1064) -+ */ -+extern int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if); -+#define dwc_param_dev_rx_fifo_size_default 1064 -+ -+/** Number of 4-byte words in the non-periodic Tx FIFO in device mode -+ * when dynamic FIFO sizing is enabled. -+ * 16 to 32768 (default 1024) -+ */ -+extern int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * -+ core_if, int32_t val); -+extern int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * -+ core_if); -+#define dwc_param_dev_nperio_tx_fifo_size_default 1024 -+ -+/** Number of 4-byte words in each of the periodic Tx FIFOs in device -+ * mode when dynamic FIFO sizing is enabled. -+ * 4 to 768 (default 256) -+ */ -+extern int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val, int fifo_num); -+extern int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * -+ core_if, int fifo_num); -+#define dwc_param_dev_perio_tx_fifo_size_default 256 -+ -+/** Number of 4-byte words in the Rx FIFO in host mode when dynamic -+ * FIFO sizing is enabled. -+ * 16 to 32768 (default 1024) -+ */ -+extern int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if); -+//#define dwc_param_host_rx_fifo_size_default 1024 -+#define dwc_param_host_rx_fifo_size_default 774 // Broadcom BCM2708 -+ -+/** Number of 4-byte words in the non-periodic Tx FIFO in host mode -+ * when Dynamic FIFO sizing is enabled in the core. -+ * 16 to 32768 (default 1024) -+ */ -+extern int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * -+ core_if, int32_t val); -+extern int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * -+ core_if); -+//#define dwc_param_host_nperio_tx_fifo_size_default 1024 -+#define dwc_param_host_nperio_tx_fifo_size_default 0x100 // Broadcom BCM2708 -+ -+/** Number of 4-byte words in the host periodic Tx FIFO when dynamic -+ * FIFO sizing is enabled. -+ * 16 to 32768 (default 1024) -+ */ -+extern int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * -+ core_if, int32_t val); -+extern int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * -+ core_if); -+//#define dwc_param_host_perio_tx_fifo_size_default 1024 -+#define dwc_param_host_perio_tx_fifo_size_default 0x200 // Broadcom BCM2708 -+ -+/** The maximum transfer size supported in bytes. -+ * 2047 to 65,535 (default 65,535) -+ */ -+extern int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if); -+#define dwc_param_max_transfer_size_default 65535 -+ -+/** The maximum number of packets in a transfer. -+ * 15 to 511 (default 511) -+ */ -+extern int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if); -+#define dwc_param_max_packet_count_default 511 -+ -+/** The number of host channel registers to use. -+ * 1 to 16 (default 12) -+ * Note: The FPGA configuration supports a maximum of 12 host channels. -+ */ -+extern int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if); -+//#define dwc_param_host_channels_default 12 -+#define dwc_param_host_channels_default 8 // Broadcom BCM2708 -+ -+/** The number of endpoints in addition to EP0 available for device -+ * mode operations. -+ * 1 to 15 (default 6 IN and OUT) -+ * Note: The FPGA configuration supports a maximum of 6 IN and OUT -+ * endpoints in addition to EP0. -+ */ -+extern int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if); -+#define dwc_param_dev_endpoints_default 6 -+ -+/** -+ * Specifies the type of PHY interface to use. By default, the driver -+ * will automatically detect the phy_type. -+ * -+ * 0 - Full Speed PHY -+ * 1 - UTMI+ (default) -+ * 2 - ULPI -+ */ -+extern int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val); -+extern int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if); -+#define DWC_PHY_TYPE_PARAM_FS 0 -+#define DWC_PHY_TYPE_PARAM_UTMI 1 -+#define DWC_PHY_TYPE_PARAM_ULPI 2 -+#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI -+ -+/** -+ * Specifies the UTMI+ Data Width. This parameter is -+ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI -+ * PHY_TYPE, this parameter indicates the data width between -+ * the MAC and the ULPI Wrapper.) Also, this parameter is -+ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set -+ * to "8 and 16 bits", meaning that the core has been -+ * configured to work at either data path width. -+ * -+ * 8 or 16 bits (default 16) -+ */ -+extern int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if); -+//#define dwc_param_phy_utmi_width_default 16 -+#define dwc_param_phy_utmi_width_default 8 // Broadcom BCM2708 -+ -+/** -+ * Specifies whether the ULPI operates at double or single -+ * data rate. This parameter is only applicable if PHY_TYPE is -+ * ULPI. -+ * -+ * 0 - single data rate ULPI interface with 8 bit wide data -+ * bus (default) -+ * 1 - double data rate ULPI interface with 4 bit wide data -+ * bus -+ */ -+extern int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if); -+#define dwc_param_phy_ulpi_ddr_default 0 -+ -+/** -+ * Specifies whether to use the internal or external supply to -+ * drive the vbus with a ULPI phy. -+ */ -+extern int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if); -+#define DWC_PHY_ULPI_INTERNAL_VBUS 0 -+#define DWC_PHY_ULPI_EXTERNAL_VBUS 1 -+#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS -+ -+/** -+ * Specifies whether to use the I2Cinterface for full speed PHY. This -+ * parameter is only applicable if PHY_TYPE is FS. -+ * 0 - No (default) -+ * 1 - Yes -+ */ -+extern int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if); -+#define dwc_param_i2c_enable_default 0 -+ -+extern int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if); -+#define dwc_param_ulpi_fs_ls_default 0 -+ -+extern int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val); -+extern int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if); -+#define dwc_param_ts_dline_default 0 -+ -+/** -+ * Specifies whether dedicated transmit FIFOs are -+ * enabled for non periodic IN endpoints in device mode -+ * 0 - No -+ * 1 - Yes -+ */ -+extern int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t * -+ core_if); -+#define dwc_param_en_multiple_tx_fifo_default 1 -+ -+/** Number of 4-byte words in each of the Tx FIFOs in device -+ * mode when dynamic FIFO sizing is enabled. -+ * 4 to 768 (default 256) -+ */ -+extern int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int fifo_num, int32_t val); -+extern int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int fifo_num); -+#define dwc_param_dev_tx_fifo_size_default 768 -+ -+/** Thresholding enable flag- -+ * bit 0 - enable non-ISO Tx thresholding -+ * bit 1 - enable ISO Tx thresholding -+ * bit 2 - enable Rx thresholding -+ */ -+extern int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val); -+extern int32_t dwc_otg_get_thr_ctl(dwc_otg_core_if_t * core_if, int fifo_num); -+#define dwc_param_thr_ctl_default 0 -+ -+/** Thresholding length for Tx -+ * FIFOs in 32 bit DWORDs -+ */ -+extern int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_tx_thr_length(dwc_otg_core_if_t * core_if); -+#define dwc_param_tx_thr_length_default 64 -+ -+/** Thresholding length for Rx -+ * FIFOs in 32 bit DWORDs -+ */ -+extern int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_rx_thr_length(dwc_otg_core_if_t * core_if); -+#define dwc_param_rx_thr_length_default 64 -+ -+/** -+ * Specifies whether LPM (Link Power Management) support is enabled -+ */ -+extern int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if); -+#define dwc_param_lpm_enable_default 1 -+ -+/** -+ * Specifies whether PTI enhancement is enabled -+ */ -+extern int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if); -+#define dwc_param_pti_enable_default 0 -+ -+/** -+ * Specifies whether MPI enhancement is enabled -+ */ -+extern int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if); -+#define dwc_param_mpi_enable_default 0 -+ -+/** -+ * Specifies whether ADP capability is enabled -+ */ -+extern int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if); -+#define dwc_param_adp_enable_default 0 -+ -+/** -+ * Specifies whether IC_USB capability is enabled -+ */ -+ -+extern int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if); -+#define dwc_param_ic_usb_cap_default 0 -+ -+extern int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if); -+#define dwc_param_ahb_thr_ratio_default 0 -+ -+extern int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if); -+#define dwc_param_power_down_default 0 -+ -+extern int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if); -+#define dwc_param_reload_ctl_default 0 -+ -+extern int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if); -+#define dwc_param_dev_out_nak_default 0 -+ -+extern int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if); -+#define dwc_param_cont_on_bna_default 0 -+ -+extern int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if); -+#define dwc_param_ahb_single_default 0 -+ -+extern int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val); -+extern int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if); -+#define dwc_param_otg_ver_default 0 -+ -+/** @} */ -+ -+/** @name Access to registers and bit-fields */ -+ -+/** -+ * Dump core registers and SPRAM -+ */ -+extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_dump_spram(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t * _core_if); -+ -+/** -+ * Get host negotiation status. -+ */ -+extern uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Get srp status -+ */ -+extern uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Set hnpreq bit in the GOTGCTL register. -+ */ -+extern void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get Content of SNPSID register. -+ */ -+extern uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Get current mode. -+ * Returns 0 if in device mode, and 1 if in host mode. -+ */ -+extern uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Get value of hnpcapable field in the GUSBCFG register -+ */ -+extern uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of hnpcapable field in the GUSBCFG register -+ */ -+extern void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get value of srpcapable field in the GUSBCFG register -+ */ -+extern uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of srpcapable field in the GUSBCFG register -+ */ -+extern void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get value of devspeed field in the DCFG register -+ */ -+extern uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of devspeed field in the DCFG register -+ */ -+extern void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get the value of busconnected field from the HPRT0 register -+ */ -+extern uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Gets the device enumeration Speed. -+ */ -+extern uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Get value of prtpwr field from the HPRT0 register -+ */ -+extern uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Get value of flag indicating core state - hibernated or not -+ */ -+extern uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Set value of prtpwr field from the HPRT0 register -+ */ -+extern void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get value of prtsusp field from the HPRT0 regsiter -+ */ -+extern uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of prtpwr field from the HPRT0 register -+ */ -+extern void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get value of ModeChTimEn field from the HCFG regsiter -+ */ -+extern uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of ModeChTimEn field from the HCFG regsiter -+ */ -+extern void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get value of Fram Interval field from the HFIR regsiter -+ */ -+extern uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of Frame Interval field from the HFIR regsiter -+ */ -+extern void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Set value of prtres field from the HPRT0 register -+ *FIXME Remove? -+ */ -+extern void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get value of rmtwkupsig bit in DCTL register -+ */ -+extern uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Get value of prt_sleep_sts field from the GLPMCFG register -+ */ -+extern uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Get value of rem_wkup_en field from the GLPMCFG register -+ */ -+extern uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Get value of appl_resp field from the GLPMCFG register -+ */ -+extern uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of appl_resp field from the GLPMCFG register -+ */ -+extern void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get value of hsic_connect field from the GLPMCFG register -+ */ -+extern uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of hsic_connect field from the GLPMCFG register -+ */ -+extern void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get value of inv_sel_hsic field from the GLPMCFG register. -+ */ -+extern uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of inv_sel_hsic field from the GLPMFG register. -+ */ -+extern void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/* -+ * Some functions for accessing registers -+ */ -+ -+/** -+ * GOTGCTL register -+ */ -+extern uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * GUSBCFG register -+ */ -+extern uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * GRXFSIZ register -+ */ -+extern uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * GNPTXFSIZ register -+ */ -+extern uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+extern uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * GGPIO register -+ */ -+extern uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * GUID register -+ */ -+extern uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * HPRT0 register -+ */ -+extern uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * GHPTXFSIZE -+ */ -+extern uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if); -+ -+/** @} */ -+ -+#endif /* __DWC_CORE_IF_H__ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_dbg.h -@@ -0,0 +1,117 @@ -+/* ========================================================================== -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#ifndef __DWC_OTG_DBG_H__ -+#define __DWC_OTG_DBG_H__ -+ -+/** @file -+ * This file defines debug levels. -+ * Debugging support vanishes in non-debug builds. -+ */ -+ -+/** -+ * The Debug Level bit-mask variable. -+ */ -+extern uint32_t g_dbg_lvl; -+/** -+ * Set the Debug Level variable. -+ */ -+static inline uint32_t SET_DEBUG_LEVEL(const uint32_t new) -+{ -+ uint32_t old = g_dbg_lvl; -+ g_dbg_lvl = new; -+ return old; -+} -+ -+#define DBG_USER (0x1) -+/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */ -+#define DBG_CIL (0x2) -+/** When debug level has the DBG_CILV bit set, display CIL Verbose debug -+ * messages */ -+#define DBG_CILV (0x20) -+/** When debug level has the DBG_PCD bit set, display PCD (Device) debug -+ * messages */ -+#define DBG_PCD (0x4) -+/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug -+ * messages */ -+#define DBG_PCDV (0x40) -+/** When debug level has the DBG_HCD bit set, display Host debug messages */ -+#define DBG_HCD (0x8) -+/** When debug level has the DBG_HCDV bit set, display Verbose Host debug -+ * messages */ -+#define DBG_HCDV (0x80) -+/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host -+ * mode. */ -+#define DBG_HCD_URB (0x800) -+/** When debug level has the DBG_HCDI bit set, display host interrupt -+ * messages. */ -+#define DBG_HCDI (0x1000) -+ -+/** When debug level has any bit set, display debug messages */ -+#define DBG_ANY (0xFF) -+ -+/** All debug messages off */ -+#define DBG_OFF 0 -+ -+/** Prefix string for DWC_DEBUG print macros. */ -+#define USB_DWC "DWC_otg: " -+ -+/** -+ * Print a debug message when the Global debug level variable contains -+ * the bit defined in lvl. -+ * -+ * @param[in] lvl - Debug level, use one of the DBG_ constants above. -+ * @param[in] x - like printf -+ * -+ * Example:

-+ * -+ * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr); -+ * -+ *
-+ * results in:
-+ * -+ * usb-DWC_otg: dwc_otg_cil_init(ca867000) -+ * -+ */ -+#ifdef DEBUG -+ -+# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)__DWC_DEBUG(USB_DWC x ); }while(0) -+# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x ) -+ -+# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl) -+ -+#else -+ -+# define DWC_DEBUGPL(lvl, x...) do{}while(0) -+# define DWC_DEBUGP(x...) -+ -+# define CHK_DEBUG_LEVEL(level) (0) -+ -+#endif /*DEBUG*/ -+#endif ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c -@@ -0,0 +1,1757 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.c $ -+ * $Revision: #92 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+/** @file -+ * The dwc_otg_driver module provides the initialization and cleanup entry -+ * points for the DWC_otg driver. This module will be dynamically installed -+ * after Linux is booted using the insmod command. When the module is -+ * installed, the dwc_otg_driver_init function is called. When the module is -+ * removed (using rmmod), the dwc_otg_driver_cleanup function is called. -+ * -+ * This module also defines a data structure for the dwc_otg_driver, which is -+ * used in conjunction with the standard ARM lm_device structure. These -+ * structures allow the OTG driver to comply with the standard Linux driver -+ * model in which devices and drivers are registered with a bus driver. This -+ * has the benefit that Linux can expose attributes of the driver and device -+ * in its special sysfs file system. Users can then read or write files in -+ * this file system to perform diagnostics on the driver components or the -+ * device. -+ */ -+ -+#include "dwc_otg_os_dep.h" -+#include "dwc_os.h" -+#include "dwc_otg_dbg.h" -+#include "dwc_otg_driver.h" -+#include "dwc_otg_attr.h" -+#include "dwc_otg_core_if.h" -+#include "dwc_otg_pcd_if.h" -+#include "dwc_otg_hcd_if.h" -+#include "dwc_otg_fiq_fsm.h" -+ -+#define DWC_DRIVER_VERSION "3.00a 10-AUG-2012" -+#define DWC_DRIVER_DESC "HS OTG USB Controller driver" -+ -+bool microframe_schedule=true; -+ -+static const char dwc_driver_name[] = "dwc_otg"; -+ -+ -+extern int pcd_init( -+#ifdef LM_INTERFACE -+ struct lm_device *_dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *_dev -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *dev -+#endif -+ ); -+extern int hcd_init( -+#ifdef LM_INTERFACE -+ struct lm_device *_dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *_dev -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *dev -+#endif -+ ); -+ -+extern int pcd_remove( -+#ifdef LM_INTERFACE -+ struct lm_device *_dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *_dev -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *_dev -+#endif -+ ); -+ -+extern void hcd_remove( -+#ifdef LM_INTERFACE -+ struct lm_device *_dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *_dev -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *_dev -+#endif -+ ); -+ -+extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host); -+ -+/*-------------------------------------------------------------------------*/ -+/* Encapsulate the module parameter settings */ -+ -+struct dwc_otg_driver_module_params { -+ int32_t opt; -+ int32_t otg_cap; -+ int32_t dma_enable; -+ int32_t dma_desc_enable; -+ int32_t dma_burst_size; -+ int32_t speed; -+ int32_t host_support_fs_ls_low_power; -+ int32_t host_ls_low_power_phy_clk; -+ int32_t enable_dynamic_fifo; -+ int32_t data_fifo_size; -+ int32_t dev_rx_fifo_size; -+ int32_t dev_nperio_tx_fifo_size; -+ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS]; -+ int32_t host_rx_fifo_size; -+ int32_t host_nperio_tx_fifo_size; -+ int32_t host_perio_tx_fifo_size; -+ int32_t max_transfer_size; -+ int32_t max_packet_count; -+ int32_t host_channels; -+ int32_t dev_endpoints; -+ int32_t phy_type; -+ int32_t phy_utmi_width; -+ int32_t phy_ulpi_ddr; -+ int32_t phy_ulpi_ext_vbus; -+ int32_t i2c_enable; -+ int32_t ulpi_fs_ls; -+ int32_t ts_dline; -+ int32_t en_multiple_tx_fifo; -+ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS]; -+ uint32_t thr_ctl; -+ uint32_t tx_thr_length; -+ uint32_t rx_thr_length; -+ int32_t pti_enable; -+ int32_t mpi_enable; -+ int32_t lpm_enable; -+ int32_t ic_usb_cap; -+ int32_t ahb_thr_ratio; -+ int32_t power_down; -+ int32_t reload_ctl; -+ int32_t dev_out_nak; -+ int32_t cont_on_bna; -+ int32_t ahb_single; -+ int32_t otg_ver; -+ int32_t adp_enable; -+}; -+ -+static struct dwc_otg_driver_module_params dwc_otg_module_params = { -+ .opt = -1, -+ .otg_cap = -1, -+ .dma_enable = -1, -+ .dma_desc_enable = -1, -+ .dma_burst_size = -1, -+ .speed = -1, -+ .host_support_fs_ls_low_power = -1, -+ .host_ls_low_power_phy_clk = -1, -+ .enable_dynamic_fifo = -1, -+ .data_fifo_size = -1, -+ .dev_rx_fifo_size = -1, -+ .dev_nperio_tx_fifo_size = -1, -+ .dev_perio_tx_fifo_size = { -+ /* dev_perio_tx_fifo_size_1 */ -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1 -+ /* 15 */ -+ }, -+ .host_rx_fifo_size = -1, -+ .host_nperio_tx_fifo_size = -1, -+ .host_perio_tx_fifo_size = -1, -+ .max_transfer_size = -1, -+ .max_packet_count = -1, -+ .host_channels = -1, -+ .dev_endpoints = -1, -+ .phy_type = -1, -+ .phy_utmi_width = -1, -+ .phy_ulpi_ddr = -1, -+ .phy_ulpi_ext_vbus = -1, -+ .i2c_enable = -1, -+ .ulpi_fs_ls = -1, -+ .ts_dline = -1, -+ .en_multiple_tx_fifo = -1, -+ .dev_tx_fifo_size = { -+ /* dev_tx_fifo_size */ -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1 -+ /* 15 */ -+ }, -+ .thr_ctl = -1, -+ .tx_thr_length = -1, -+ .rx_thr_length = -1, -+ .pti_enable = -1, -+ .mpi_enable = -1, -+ .lpm_enable = 0, -+ .ic_usb_cap = -1, -+ .ahb_thr_ratio = -1, -+ .power_down = -1, -+ .reload_ctl = -1, -+ .dev_out_nak = -1, -+ .cont_on_bna = -1, -+ .ahb_single = -1, -+ .otg_ver = -1, -+ .adp_enable = -1, -+}; -+ -+//Global variable to switch the fiq fix on or off -+bool fiq_enable = 1; -+// Global variable to enable the split transaction fix -+bool fiq_fsm_enable = true; -+//Bulk split-transaction NAK holdoff in microframes -+uint16_t nak_holdoff = 8; -+ -+unsigned short fiq_fsm_mask = 0x0F; -+ -+/** -+ * This function shows the Driver Version. -+ */ -+static ssize_t version_show(struct device_driver *dev, char *buf) -+{ -+ return snprintf(buf, sizeof(DWC_DRIVER_VERSION) + 2, "%s\n", -+ DWC_DRIVER_VERSION); -+} -+ -+static DRIVER_ATTR(version, S_IRUGO, version_show, NULL); -+ -+/** -+ * Global Debug Level Mask. -+ */ -+uint32_t g_dbg_lvl = 0; /* OFF */ -+ -+/** -+ * This function shows the driver Debug Level. -+ */ -+static ssize_t dbg_level_show(struct device_driver *drv, char *buf) -+{ -+ return sprintf(buf, "0x%0x\n", g_dbg_lvl); -+} -+ -+/** -+ * This function stores the driver Debug Level. -+ */ -+static ssize_t dbg_level_store(struct device_driver *drv, const char *buf, -+ size_t count) -+{ -+ g_dbg_lvl = simple_strtoul(buf, NULL, 16); -+ return count; -+} -+ -+static DRIVER_ATTR(debuglevel, S_IRUGO | S_IWUSR, dbg_level_show, -+ dbg_level_store); -+ -+/** -+ * This function is called during module intialization -+ * to pass module parameters to the DWC_OTG CORE. -+ */ -+static int set_parameters(dwc_otg_core_if_t * core_if) -+{ -+ int retval = 0; -+ int i; -+ -+ if (dwc_otg_module_params.otg_cap != -1) { -+ retval += -+ dwc_otg_set_param_otg_cap(core_if, -+ dwc_otg_module_params.otg_cap); -+ } -+ if (dwc_otg_module_params.dma_enable != -1) { -+ retval += -+ dwc_otg_set_param_dma_enable(core_if, -+ dwc_otg_module_params. -+ dma_enable); -+ } -+ if (dwc_otg_module_params.dma_desc_enable != -1) { -+ retval += -+ dwc_otg_set_param_dma_desc_enable(core_if, -+ dwc_otg_module_params. -+ dma_desc_enable); -+ } -+ if (dwc_otg_module_params.opt != -1) { -+ retval += -+ dwc_otg_set_param_opt(core_if, dwc_otg_module_params.opt); -+ } -+ if (dwc_otg_module_params.dma_burst_size != -1) { -+ retval += -+ dwc_otg_set_param_dma_burst_size(core_if, -+ dwc_otg_module_params. -+ dma_burst_size); -+ } -+ if (dwc_otg_module_params.host_support_fs_ls_low_power != -1) { -+ retval += -+ dwc_otg_set_param_host_support_fs_ls_low_power(core_if, -+ dwc_otg_module_params. -+ host_support_fs_ls_low_power); -+ } -+ if (dwc_otg_module_params.enable_dynamic_fifo != -1) { -+ retval += -+ dwc_otg_set_param_enable_dynamic_fifo(core_if, -+ dwc_otg_module_params. -+ enable_dynamic_fifo); -+ } -+ if (dwc_otg_module_params.data_fifo_size != -1) { -+ retval += -+ dwc_otg_set_param_data_fifo_size(core_if, -+ dwc_otg_module_params. -+ data_fifo_size); -+ } -+ if (dwc_otg_module_params.dev_rx_fifo_size != -1) { -+ retval += -+ dwc_otg_set_param_dev_rx_fifo_size(core_if, -+ dwc_otg_module_params. -+ dev_rx_fifo_size); -+ } -+ if (dwc_otg_module_params.dev_nperio_tx_fifo_size != -1) { -+ retval += -+ dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if, -+ dwc_otg_module_params. -+ dev_nperio_tx_fifo_size); -+ } -+ if (dwc_otg_module_params.host_rx_fifo_size != -1) { -+ retval += -+ dwc_otg_set_param_host_rx_fifo_size(core_if, -+ dwc_otg_module_params.host_rx_fifo_size); -+ } -+ if (dwc_otg_module_params.host_nperio_tx_fifo_size != -1) { -+ retval += -+ dwc_otg_set_param_host_nperio_tx_fifo_size(core_if, -+ dwc_otg_module_params. -+ host_nperio_tx_fifo_size); -+ } -+ if (dwc_otg_module_params.host_perio_tx_fifo_size != -1) { -+ retval += -+ dwc_otg_set_param_host_perio_tx_fifo_size(core_if, -+ dwc_otg_module_params. -+ host_perio_tx_fifo_size); -+ } -+ if (dwc_otg_module_params.max_transfer_size != -1) { -+ retval += -+ dwc_otg_set_param_max_transfer_size(core_if, -+ dwc_otg_module_params. -+ max_transfer_size); -+ } -+ if (dwc_otg_module_params.max_packet_count != -1) { -+ retval += -+ dwc_otg_set_param_max_packet_count(core_if, -+ dwc_otg_module_params. -+ max_packet_count); -+ } -+ if (dwc_otg_module_params.host_channels != -1) { -+ retval += -+ dwc_otg_set_param_host_channels(core_if, -+ dwc_otg_module_params. -+ host_channels); -+ } -+ if (dwc_otg_module_params.dev_endpoints != -1) { -+ retval += -+ dwc_otg_set_param_dev_endpoints(core_if, -+ dwc_otg_module_params. -+ dev_endpoints); -+ } -+ if (dwc_otg_module_params.phy_type != -1) { -+ retval += -+ dwc_otg_set_param_phy_type(core_if, -+ dwc_otg_module_params.phy_type); -+ } -+ if (dwc_otg_module_params.speed != -1) { -+ retval += -+ dwc_otg_set_param_speed(core_if, -+ dwc_otg_module_params.speed); -+ } -+ if (dwc_otg_module_params.host_ls_low_power_phy_clk != -1) { -+ retval += -+ dwc_otg_set_param_host_ls_low_power_phy_clk(core_if, -+ dwc_otg_module_params. -+ host_ls_low_power_phy_clk); -+ } -+ if (dwc_otg_module_params.phy_ulpi_ddr != -1) { -+ retval += -+ dwc_otg_set_param_phy_ulpi_ddr(core_if, -+ dwc_otg_module_params. -+ phy_ulpi_ddr); -+ } -+ if (dwc_otg_module_params.phy_ulpi_ext_vbus != -1) { -+ retval += -+ dwc_otg_set_param_phy_ulpi_ext_vbus(core_if, -+ dwc_otg_module_params. -+ phy_ulpi_ext_vbus); -+ } -+ if (dwc_otg_module_params.phy_utmi_width != -1) { -+ retval += -+ dwc_otg_set_param_phy_utmi_width(core_if, -+ dwc_otg_module_params. -+ phy_utmi_width); -+ } -+ if (dwc_otg_module_params.ulpi_fs_ls != -1) { -+ retval += -+ dwc_otg_set_param_ulpi_fs_ls(core_if, -+ dwc_otg_module_params.ulpi_fs_ls); -+ } -+ if (dwc_otg_module_params.ts_dline != -1) { -+ retval += -+ dwc_otg_set_param_ts_dline(core_if, -+ dwc_otg_module_params.ts_dline); -+ } -+ if (dwc_otg_module_params.i2c_enable != -1) { -+ retval += -+ dwc_otg_set_param_i2c_enable(core_if, -+ dwc_otg_module_params. -+ i2c_enable); -+ } -+ if (dwc_otg_module_params.en_multiple_tx_fifo != -1) { -+ retval += -+ dwc_otg_set_param_en_multiple_tx_fifo(core_if, -+ dwc_otg_module_params. -+ en_multiple_tx_fifo); -+ } -+ for (i = 0; i < 15; i++) { -+ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) { -+ retval += -+ dwc_otg_set_param_dev_perio_tx_fifo_size(core_if, -+ dwc_otg_module_params. -+ dev_perio_tx_fifo_size -+ [i], i); -+ } -+ } -+ -+ for (i = 0; i < 15; i++) { -+ if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) { -+ retval += dwc_otg_set_param_dev_tx_fifo_size(core_if, -+ dwc_otg_module_params. -+ dev_tx_fifo_size -+ [i], i); -+ } -+ } -+ if (dwc_otg_module_params.thr_ctl != -1) { -+ retval += -+ dwc_otg_set_param_thr_ctl(core_if, -+ dwc_otg_module_params.thr_ctl); -+ } -+ if (dwc_otg_module_params.mpi_enable != -1) { -+ retval += -+ dwc_otg_set_param_mpi_enable(core_if, -+ dwc_otg_module_params. -+ mpi_enable); -+ } -+ if (dwc_otg_module_params.pti_enable != -1) { -+ retval += -+ dwc_otg_set_param_pti_enable(core_if, -+ dwc_otg_module_params. -+ pti_enable); -+ } -+ if (dwc_otg_module_params.lpm_enable != -1) { -+ retval += -+ dwc_otg_set_param_lpm_enable(core_if, -+ dwc_otg_module_params. -+ lpm_enable); -+ } -+ if (dwc_otg_module_params.ic_usb_cap != -1) { -+ retval += -+ dwc_otg_set_param_ic_usb_cap(core_if, -+ dwc_otg_module_params. -+ ic_usb_cap); -+ } -+ if (dwc_otg_module_params.tx_thr_length != -1) { -+ retval += -+ dwc_otg_set_param_tx_thr_length(core_if, -+ dwc_otg_module_params.tx_thr_length); -+ } -+ if (dwc_otg_module_params.rx_thr_length != -1) { -+ retval += -+ dwc_otg_set_param_rx_thr_length(core_if, -+ dwc_otg_module_params. -+ rx_thr_length); -+ } -+ if (dwc_otg_module_params.ahb_thr_ratio != -1) { -+ retval += -+ dwc_otg_set_param_ahb_thr_ratio(core_if, -+ dwc_otg_module_params.ahb_thr_ratio); -+ } -+ if (dwc_otg_module_params.power_down != -1) { -+ retval += -+ dwc_otg_set_param_power_down(core_if, -+ dwc_otg_module_params.power_down); -+ } -+ if (dwc_otg_module_params.reload_ctl != -1) { -+ retval += -+ dwc_otg_set_param_reload_ctl(core_if, -+ dwc_otg_module_params.reload_ctl); -+ } -+ -+ if (dwc_otg_module_params.dev_out_nak != -1) { -+ retval += -+ dwc_otg_set_param_dev_out_nak(core_if, -+ dwc_otg_module_params.dev_out_nak); -+ } -+ -+ if (dwc_otg_module_params.cont_on_bna != -1) { -+ retval += -+ dwc_otg_set_param_cont_on_bna(core_if, -+ dwc_otg_module_params.cont_on_bna); -+ } -+ -+ if (dwc_otg_module_params.ahb_single != -1) { -+ retval += -+ dwc_otg_set_param_ahb_single(core_if, -+ dwc_otg_module_params.ahb_single); -+ } -+ -+ if (dwc_otg_module_params.otg_ver != -1) { -+ retval += -+ dwc_otg_set_param_otg_ver(core_if, -+ dwc_otg_module_params.otg_ver); -+ } -+ if (dwc_otg_module_params.adp_enable != -1) { -+ retval += -+ dwc_otg_set_param_adp_enable(core_if, -+ dwc_otg_module_params. -+ adp_enable); -+ } -+ return retval; -+} -+ -+/** -+ * This function is the top level interrupt handler for the Common -+ * (Device and host modes) interrupts. -+ */ -+static irqreturn_t dwc_otg_common_irq(int irq, void *dev) -+{ -+ int32_t retval = IRQ_NONE; -+ -+ retval = dwc_otg_handle_common_intr(dev); -+ if (retval != 0) { -+ S3C2410X_CLEAR_EINTPEND(); -+ } -+ return IRQ_RETVAL(retval); -+} -+ -+/** -+ * This function is called when a lm_device is unregistered with the -+ * dwc_otg_driver. This happens, for example, when the rmmod command is -+ * executed. The device may or may not be electrically present. If it is -+ * present, the driver stops device processing. Any resources used on behalf -+ * of this device are freed. -+ * -+ * @param _dev -+ */ -+#ifdef LM_INTERFACE -+#define REM_RETVAL(n) -+static void dwc_otg_driver_remove( struct lm_device *_dev ) -+{ dwc_otg_device_t *otg_dev = lm_get_drvdata(_dev); -+#elif defined(PCI_INTERFACE) -+#define REM_RETVAL(n) -+static void dwc_otg_driver_remove( struct pci_dev *_dev ) -+{ dwc_otg_device_t *otg_dev = pci_get_drvdata(_dev); -+#elif defined(PLATFORM_INTERFACE) -+#define REM_RETVAL(n) n -+static int dwc_otg_driver_remove( struct platform_device *_dev ) -+{ dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev); -+#endif -+ -+ DWC_DEBUGPL(DBG_ANY, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev); -+ -+ if (!otg_dev) { -+ /* Memory allocation for the dwc_otg_device failed. */ -+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); -+ return REM_RETVAL(-ENOMEM); -+ } -+#ifndef DWC_DEVICE_ONLY -+ if (otg_dev->hcd) { -+ hcd_remove(_dev); -+ } else { -+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); -+ return REM_RETVAL(-EINVAL); -+ } -+#endif -+ -+#ifndef DWC_HOST_ONLY -+ if (otg_dev->pcd) { -+ pcd_remove(_dev); -+ } else { -+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->pcd NULL!\n", __func__); -+ return REM_RETVAL(-EINVAL); -+ } -+#endif -+ /* -+ * Free the IRQ -+ */ -+ if (otg_dev->common_irq_installed) { -+#ifdef PLATFORM_INTERFACE -+ free_irq(platform_get_irq(_dev, 0), otg_dev); -+#else -+ free_irq(_dev->irq, otg_dev); -+#endif -+ } else { -+ DWC_DEBUGPL(DBG_ANY, "%s: There is no installed irq!\n", __func__); -+ return REM_RETVAL(-ENXIO); -+ } -+ -+ if (otg_dev->core_if) { -+ dwc_otg_cil_remove(otg_dev->core_if); -+ } else { -+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->core_if NULL!\n", __func__); -+ return REM_RETVAL(-ENXIO); -+ } -+ -+ /* -+ * Remove the device attributes -+ */ -+ dwc_otg_attr_remove(_dev); -+ -+ /* -+ * Return the memory. -+ */ -+ if (otg_dev->os_dep.base) { -+ iounmap(otg_dev->os_dep.base); -+ } -+ DWC_FREE(otg_dev); -+ -+ /* -+ * Clear the drvdata pointer. -+ */ -+#ifdef LM_INTERFACE -+ lm_set_drvdata(_dev, 0); -+#elif defined(PCI_INTERFACE) -+ release_mem_region(otg_dev->os_dep.rsrc_start, -+ otg_dev->os_dep.rsrc_len); -+ pci_set_drvdata(_dev, 0); -+#elif defined(PLATFORM_INTERFACE) -+ platform_set_drvdata(_dev, 0); -+#endif -+ return REM_RETVAL(0); -+} -+ -+/** -+ * This function is called when an lm_device is bound to a -+ * dwc_otg_driver. It creates the driver components required to -+ * control the device (CIL, HCD, and PCD) and it initializes the -+ * device. The driver components are stored in a dwc_otg_device -+ * structure. A reference to the dwc_otg_device is saved in the -+ * lm_device. This allows the driver to access the dwc_otg_device -+ * structure on subsequent calls to driver methods for this device. -+ * -+ * @param _dev Bus device -+ */ -+static int dwc_otg_driver_probe( -+#ifdef LM_INTERFACE -+ struct lm_device *_dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *_dev, -+ const struct pci_device_id *id -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *_dev -+#endif -+ ) -+{ -+ int retval = 0; -+ dwc_otg_device_t *dwc_otg_device; -+ int devirq; -+ -+ dev_dbg(&_dev->dev, "dwc_otg_driver_probe(%p)\n", _dev); -+#ifdef LM_INTERFACE -+ dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)_dev->resource.start); -+#elif defined(PCI_INTERFACE) -+ if (!id) { -+ DWC_ERROR("Invalid pci_device_id %p", id); -+ return -EINVAL; -+ } -+ -+ if (!_dev || (pci_enable_device(_dev) < 0)) { -+ DWC_ERROR("Invalid pci_device %p", _dev); -+ return -ENODEV; -+ } -+ dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)pci_resource_start(_dev,0)); -+ /* other stuff needed as well? */ -+ -+#elif defined(PLATFORM_INTERFACE) -+ dev_dbg(&_dev->dev, "start=0x%08x (len 0x%x)\n", -+ (unsigned)_dev->resource->start, -+ (unsigned)(_dev->resource->end - _dev->resource->start)); -+#endif -+ -+ dwc_otg_device = DWC_ALLOC(sizeof(dwc_otg_device_t)); -+ -+ if (!dwc_otg_device) { -+ dev_err(&_dev->dev, "kmalloc of dwc_otg_device failed\n"); -+ return -ENOMEM; -+ } -+ -+ memset(dwc_otg_device, 0, sizeof(*dwc_otg_device)); -+ dwc_otg_device->os_dep.reg_offset = 0xFFFFFFFF; -+ dwc_otg_device->os_dep.platformdev = _dev; -+ -+ /* -+ * Map the DWC_otg Core memory into virtual address space. -+ */ -+#ifdef LM_INTERFACE -+ dwc_otg_device->os_dep.base = ioremap(_dev->resource.start, SZ_256K); -+ -+ if (!dwc_otg_device->os_dep.base) { -+ dev_err(&_dev->dev, "ioremap() failed\n"); -+ DWC_FREE(dwc_otg_device); -+ return -ENOMEM; -+ } -+ dev_dbg(&_dev->dev, "base=0x%08x\n", -+ (unsigned)dwc_otg_device->os_dep.base); -+#elif defined(PCI_INTERFACE) -+ _dev->current_state = PCI_D0; -+ _dev->dev.power.power_state = PMSG_ON; -+ -+ if (!_dev->irq) { -+ DWC_ERROR("Found HC with no IRQ. Check BIOS/PCI %s setup!", -+ pci_name(_dev)); -+ iounmap(dwc_otg_device->os_dep.base); -+ DWC_FREE(dwc_otg_device); -+ return -ENODEV; -+ } -+ -+ dwc_otg_device->os_dep.rsrc_start = pci_resource_start(_dev, 0); -+ dwc_otg_device->os_dep.rsrc_len = pci_resource_len(_dev, 0); -+ DWC_DEBUGPL(DBG_ANY, "PCI resource: start=%08x, len=%08x\n", -+ (unsigned)dwc_otg_device->os_dep.rsrc_start, -+ (unsigned)dwc_otg_device->os_dep.rsrc_len); -+ if (!request_mem_region -+ (dwc_otg_device->os_dep.rsrc_start, dwc_otg_device->os_dep.rsrc_len, -+ "dwc_otg")) { -+ dev_dbg(&_dev->dev, "error requesting memory\n"); -+ iounmap(dwc_otg_device->os_dep.base); -+ DWC_FREE(dwc_otg_device); -+ return -EFAULT; -+ } -+ -+ dwc_otg_device->os_dep.base = -+ ioremap_nocache(dwc_otg_device->os_dep.rsrc_start, -+ dwc_otg_device->os_dep.rsrc_len); -+ if (dwc_otg_device->os_dep.base == NULL) { -+ dev_dbg(&_dev->dev, "error mapping memory\n"); -+ release_mem_region(dwc_otg_device->os_dep.rsrc_start, -+ dwc_otg_device->os_dep.rsrc_len); -+ iounmap(dwc_otg_device->os_dep.base); -+ DWC_FREE(dwc_otg_device); -+ return -EFAULT; -+ } -+ dev_dbg(&_dev->dev, "base=0x%p (before adjust) \n", -+ dwc_otg_device->os_dep.base); -+ dwc_otg_device->os_dep.base = (char *)dwc_otg_device->os_dep.base; -+ dev_dbg(&_dev->dev, "base=0x%p (after adjust) \n", -+ dwc_otg_device->os_dep.base); -+ dev_dbg(&_dev->dev, "%s: mapped PA 0x%x to VA 0x%p\n", __func__, -+ (unsigned)dwc_otg_device->os_dep.rsrc_start, -+ dwc_otg_device->os_dep.base); -+ -+ pci_set_master(_dev); -+ pci_set_drvdata(_dev, dwc_otg_device); -+#elif defined(PLATFORM_INTERFACE) -+ DWC_DEBUGPL(DBG_ANY,"Platform resource: start=%08x, len=%08x\n", -+ _dev->resource->start, -+ _dev->resource->end - _dev->resource->start + 1); -+#if 1 -+ if (!request_mem_region(_dev->resource[0].start, -+ _dev->resource[0].end - _dev->resource[0].start + 1, -+ "dwc_otg")) { -+ dev_dbg(&_dev->dev, "error reserving mapped memory\n"); -+ retval = -EFAULT; -+ goto fail; -+ } -+ -+ dwc_otg_device->os_dep.base = ioremap_nocache(_dev->resource[0].start, -+ _dev->resource[0].end - -+ _dev->resource[0].start+1); -+ if (fiq_enable) -+ { -+ if (!request_mem_region(_dev->resource[1].start, -+ _dev->resource[1].end - _dev->resource[1].start + 1, -+ "dwc_otg")) { -+ dev_dbg(&_dev->dev, "error reserving mapped memory\n"); -+ retval = -EFAULT; -+ goto fail; -+ } -+ -+ dwc_otg_device->os_dep.mphi_base = ioremap_nocache(_dev->resource[1].start, -+ _dev->resource[1].end - -+ _dev->resource[1].start + 1); -+ } -+ -+#else -+ { -+ struct map_desc desc = { -+ .virtual = IO_ADDRESS((unsigned)_dev->resource->start), -+ .pfn = __phys_to_pfn((unsigned)_dev->resource->start), -+ .length = SZ_128K, -+ .type = MT_DEVICE -+ }; -+ iotable_init(&desc, 1); -+ dwc_otg_device->os_dep.base = (void *)desc.virtual; -+ } -+#endif -+ if (!dwc_otg_device->os_dep.base) { -+ dev_err(&_dev->dev, "ioremap() failed\n"); -+ retval = -ENOMEM; -+ goto fail; -+ } -+ dev_dbg(&_dev->dev, "base=0x%08x\n", -+ (unsigned)dwc_otg_device->os_dep.base); -+#endif -+ -+ /* -+ * Initialize driver data to point to the global DWC_otg -+ * Device structure. -+ */ -+#ifdef LM_INTERFACE -+ lm_set_drvdata(_dev, dwc_otg_device); -+#elif defined(PLATFORM_INTERFACE) -+ platform_set_drvdata(_dev, dwc_otg_device); -+#endif -+ dev_dbg(&_dev->dev, "dwc_otg_device=0x%p\n", dwc_otg_device); -+ -+ dwc_otg_device->core_if = dwc_otg_cil_init(dwc_otg_device->os_dep.base); -+ DWC_DEBUGPL(DBG_HCDV, "probe of device %p given core_if %p\n", -+ dwc_otg_device, dwc_otg_device->core_if);//GRAYG -+ -+ if (!dwc_otg_device->core_if) { -+ dev_err(&_dev->dev, "CIL initialization failed!\n"); -+ retval = -ENOMEM; -+ goto fail; -+ } -+ -+ dev_dbg(&_dev->dev, "Calling get_gsnpsid\n"); -+ /* -+ * Attempt to ensure this device is really a DWC_otg Controller. -+ * Read and verify the SNPSID register contents. The value should be -+ * 0x45F42XXX or 0x45F42XXX, which corresponds to either "OT2" or "OTG3", -+ * as in "OTG version 2.XX" or "OTG version 3.XX". -+ */ -+ -+ if (((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) != 0x4F542000) && -+ ((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) != 0x4F543000)) { -+ dev_err(&_dev->dev, "Bad value for SNPSID: 0x%08x\n", -+ dwc_otg_get_gsnpsid(dwc_otg_device->core_if)); -+ retval = -EINVAL; -+ goto fail; -+ } -+ -+ /* -+ * Validate parameter values. -+ */ -+ dev_dbg(&_dev->dev, "Calling set_parameters\n"); -+ if (set_parameters(dwc_otg_device->core_if)) { -+ retval = -EINVAL; -+ goto fail; -+ } -+ -+ /* -+ * Create Device Attributes in sysfs -+ */ -+ dev_dbg(&_dev->dev, "Calling attr_create\n"); -+ dwc_otg_attr_create(_dev); -+ -+ /* -+ * Disable the global interrupt until all the interrupt -+ * handlers are installed. -+ */ -+ dev_dbg(&_dev->dev, "Calling disable_global_interrupts\n"); -+ dwc_otg_disable_global_interrupts(dwc_otg_device->core_if); -+ -+ /* -+ * Install the interrupt handler for the common interrupts before -+ * enabling common interrupts in core_init below. -+ */ -+ -+#if defined(PLATFORM_INTERFACE) -+ devirq = platform_get_irq(_dev, fiq_enable ? 0 : 1); -+#else -+ devirq = _dev->irq; -+#endif -+ DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n", -+ devirq); -+ dev_dbg(&_dev->dev, "Calling request_irq(%d)\n", devirq); -+ retval = request_irq(devirq, dwc_otg_common_irq, -+ IRQF_SHARED, -+ "dwc_otg", dwc_otg_device); -+ if (retval) { -+ DWC_ERROR("request of irq%d failed\n", devirq); -+ retval = -EBUSY; -+ goto fail; -+ } else { -+ dwc_otg_device->common_irq_installed = 1; -+ } -+ -+#ifndef IRQF_TRIGGER_LOW -+#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) -+ dev_dbg(&_dev->dev, "Calling set_irq_type\n"); -+ set_irq_type(devirq, -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) -+ IRQT_LOW -+#else -+ IRQ_TYPE_LEVEL_LOW -+#endif -+ ); -+#endif -+#endif /*IRQF_TRIGGER_LOW*/ -+ -+ /* -+ * Initialize the DWC_otg core. -+ */ -+ dev_dbg(&_dev->dev, "Calling dwc_otg_core_init\n"); -+ dwc_otg_core_init(dwc_otg_device->core_if); -+ -+#ifndef DWC_HOST_ONLY -+ /* -+ * Initialize the PCD -+ */ -+ dev_dbg(&_dev->dev, "Calling pcd_init\n"); -+ retval = pcd_init(_dev); -+ if (retval != 0) { -+ DWC_ERROR("pcd_init failed\n"); -+ dwc_otg_device->pcd = NULL; -+ goto fail; -+ } -+#endif -+#ifndef DWC_DEVICE_ONLY -+ /* -+ * Initialize the HCD -+ */ -+ dev_dbg(&_dev->dev, "Calling hcd_init\n"); -+ retval = hcd_init(_dev); -+ if (retval != 0) { -+ DWC_ERROR("hcd_init failed\n"); -+ dwc_otg_device->hcd = NULL; -+ goto fail; -+ } -+#endif -+ /* Recover from drvdata having been overwritten by hcd_init() */ -+#ifdef LM_INTERFACE -+ lm_set_drvdata(_dev, dwc_otg_device); -+#elif defined(PLATFORM_INTERFACE) -+ platform_set_drvdata(_dev, dwc_otg_device); -+#elif defined(PCI_INTERFACE) -+ pci_set_drvdata(_dev, dwc_otg_device); -+ dwc_otg_device->os_dep.pcidev = _dev; -+#endif -+ -+ /* -+ * Enable the global interrupt after all the interrupt -+ * handlers are installed if there is no ADP support else -+ * perform initial actions required for Internal ADP logic. -+ */ -+ if (!dwc_otg_get_param_adp_enable(dwc_otg_device->core_if)) { -+ dev_dbg(&_dev->dev, "Calling enable_global_interrupts\n"); -+ dwc_otg_enable_global_interrupts(dwc_otg_device->core_if); -+ dev_dbg(&_dev->dev, "Done\n"); -+ } else -+ dwc_otg_adp_start(dwc_otg_device->core_if, -+ dwc_otg_is_host_mode(dwc_otg_device->core_if)); -+ -+ return 0; -+ -+fail: -+ dwc_otg_driver_remove(_dev); -+ return retval; -+} -+ -+/** -+ * This structure defines the methods to be called by a bus driver -+ * during the lifecycle of a device on that bus. Both drivers and -+ * devices are registered with a bus driver. The bus driver matches -+ * devices to drivers based on information in the device and driver -+ * structures. -+ * -+ * The probe function is called when the bus driver matches a device -+ * to this driver. The remove function is called when a device is -+ * unregistered with the bus driver. -+ */ -+#ifdef LM_INTERFACE -+static struct lm_driver dwc_otg_driver = { -+ .drv = {.name = (char *)dwc_driver_name,}, -+ .probe = dwc_otg_driver_probe, -+ .remove = dwc_otg_driver_remove, -+ // 'suspend' and 'resume' absent -+}; -+#elif defined(PCI_INTERFACE) -+static const struct pci_device_id pci_ids[] = { { -+ PCI_DEVICE(0x16c3, 0xabcd), -+ .driver_data = -+ (unsigned long)0xdeadbeef, -+ }, { /* end: all zeroes */ } -+}; -+ -+MODULE_DEVICE_TABLE(pci, pci_ids); -+ -+/* pci driver glue; this is a "new style" PCI driver module */ -+static struct pci_driver dwc_otg_driver = { -+ .name = "dwc_otg", -+ .id_table = pci_ids, -+ -+ .probe = dwc_otg_driver_probe, -+ .remove = dwc_otg_driver_remove, -+ -+ .driver = { -+ .name = (char *)dwc_driver_name, -+ }, -+}; -+#elif defined(PLATFORM_INTERFACE) -+static struct platform_device_id platform_ids[] = { -+ { -+ .name = "bcm2708_usb", -+ .driver_data = (kernel_ulong_t) 0xdeadbeef, -+ }, -+ { /* end: all zeroes */ } -+}; -+MODULE_DEVICE_TABLE(platform, platform_ids); -+ -+static const struct of_device_id dwc_otg_of_match_table[] = { -+ { .compatible = "brcm,bcm2708-usb", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, dwc_otg_of_match_table); -+ -+static struct platform_driver dwc_otg_driver = { -+ .driver = { -+ .name = (char *)dwc_driver_name, -+ .of_match_table = dwc_otg_of_match_table, -+ }, -+ .id_table = platform_ids, -+ -+ .probe = dwc_otg_driver_probe, -+ .remove = dwc_otg_driver_remove, -+ // no 'shutdown', 'suspend', 'resume', 'suspend_late' or 'resume_early' -+}; -+#endif -+ -+/** -+ * This function is called when the dwc_otg_driver is installed with the -+ * insmod command. It registers the dwc_otg_driver structure with the -+ * appropriate bus driver. This will cause the dwc_otg_driver_probe function -+ * to be called. In addition, the bus driver will automatically expose -+ * attributes defined for the device and driver in the special sysfs file -+ * system. -+ * -+ * @return -+ */ -+static int __init dwc_otg_driver_init(void) -+{ -+ int retval = 0; -+ int error; -+ struct device_driver *drv; -+ -+ if(fiq_fsm_enable && !fiq_enable) { -+ printk(KERN_WARNING "dwc_otg: fiq_fsm_enable was set without fiq_enable! Correcting.\n"); -+ fiq_enable = 1; -+ } -+ -+ printk(KERN_INFO "%s: version %s (%s bus)\n", dwc_driver_name, -+ DWC_DRIVER_VERSION, -+#ifdef LM_INTERFACE -+ "logicmodule"); -+ retval = lm_driver_register(&dwc_otg_driver); -+ drv = &dwc_otg_driver.drv; -+#elif defined(PCI_INTERFACE) -+ "pci"); -+ retval = pci_register_driver(&dwc_otg_driver); -+ drv = &dwc_otg_driver.driver; -+#elif defined(PLATFORM_INTERFACE) -+ "platform"); -+ retval = platform_driver_register(&dwc_otg_driver); -+ drv = &dwc_otg_driver.driver; -+#endif -+ if (retval < 0) { -+ printk(KERN_ERR "%s retval=%d\n", __func__, retval); -+ return retval; -+ } -+ printk(KERN_DEBUG "dwc_otg: FIQ %s\n", fiq_enable ? "enabled":"disabled"); -+ printk(KERN_DEBUG "dwc_otg: NAK holdoff %s\n", nak_holdoff ? "enabled":"disabled"); -+ printk(KERN_DEBUG "dwc_otg: FIQ split-transaction FSM %s\n", fiq_fsm_enable ? "enabled":"disabled"); -+ -+ error = driver_create_file(drv, &driver_attr_version); -+#ifdef DEBUG -+ error = driver_create_file(drv, &driver_attr_debuglevel); -+#endif -+ return retval; -+} -+ -+module_init(dwc_otg_driver_init); -+ -+/** -+ * This function is called when the driver is removed from the kernel -+ * with the rmmod command. The driver unregisters itself with its bus -+ * driver. -+ * -+ */ -+static void __exit dwc_otg_driver_cleanup(void) -+{ -+ printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n"); -+ -+#ifdef LM_INTERFACE -+ driver_remove_file(&dwc_otg_driver.drv, &driver_attr_debuglevel); -+ driver_remove_file(&dwc_otg_driver.drv, &driver_attr_version); -+ lm_driver_unregister(&dwc_otg_driver); -+#elif defined(PCI_INTERFACE) -+ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); -+ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version); -+ pci_unregister_driver(&dwc_otg_driver); -+#elif defined(PLATFORM_INTERFACE) -+ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); -+ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version); -+ platform_driver_unregister(&dwc_otg_driver); -+#endif -+ -+ printk(KERN_INFO "%s module removed\n", dwc_driver_name); -+} -+ -+module_exit(dwc_otg_driver_cleanup); -+ -+MODULE_DESCRIPTION(DWC_DRIVER_DESC); -+MODULE_AUTHOR("Synopsys Inc."); -+MODULE_LICENSE("GPL"); -+ -+module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444); -+MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None"); -+module_param_named(opt, dwc_otg_module_params.opt, int, 0444); -+MODULE_PARM_DESC(opt, "OPT Mode"); -+module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444); -+MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled"); -+ -+module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int, -+ 0444); -+MODULE_PARM_DESC(dma_desc_enable, -+ "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled"); -+ -+module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, -+ 0444); -+MODULE_PARM_DESC(dma_burst_size, -+ "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256"); -+module_param_named(speed, dwc_otg_module_params.speed, int, 0444); -+MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed"); -+module_param_named(host_support_fs_ls_low_power, -+ dwc_otg_module_params.host_support_fs_ls_low_power, int, -+ 0444); -+MODULE_PARM_DESC(host_support_fs_ls_low_power, -+ "Support Low Power w/FS or LS 0=Support 1=Don't Support"); -+module_param_named(host_ls_low_power_phy_clk, -+ dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444); -+MODULE_PARM_DESC(host_ls_low_power_phy_clk, -+ "Low Speed Low Power Clock 0=48Mhz 1=6Mhz"); -+module_param_named(enable_dynamic_fifo, -+ dwc_otg_module_params.enable_dynamic_fifo, int, 0444); -+MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing"); -+module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, -+ 0444); -+MODULE_PARM_DESC(data_fifo_size, -+ "Total number of words in the data FIFO memory 32-32768"); -+module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, -+ int, 0444); -+MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); -+module_param_named(dev_nperio_tx_fifo_size, -+ dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444); -+MODULE_PARM_DESC(dev_nperio_tx_fifo_size, -+ "Number of words in the non-periodic Tx FIFO 16-32768"); -+module_param_named(dev_perio_tx_fifo_size_1, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_2, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_3, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_4, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_5, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_6, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_7, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_8, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_9, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_10, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_11, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_12, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_13, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_14, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_15, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, -+ int, 0444); -+MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); -+module_param_named(host_nperio_tx_fifo_size, -+ dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444); -+MODULE_PARM_DESC(host_nperio_tx_fifo_size, -+ "Number of words in the non-periodic Tx FIFO 16-32768"); -+module_param_named(host_perio_tx_fifo_size, -+ dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444); -+MODULE_PARM_DESC(host_perio_tx_fifo_size, -+ "Number of words in the host periodic Tx FIFO 16-32768"); -+module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, -+ int, 0444); -+/** @todo Set the max to 512K, modify checks */ -+MODULE_PARM_DESC(max_transfer_size, -+ "The maximum transfer size supported in bytes 2047-65535"); -+module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, -+ int, 0444); -+MODULE_PARM_DESC(max_packet_count, -+ "The maximum number of packets in a transfer 15-511"); -+module_param_named(host_channels, dwc_otg_module_params.host_channels, int, -+ 0444); -+MODULE_PARM_DESC(host_channels, -+ "The number of host channel registers to use 1-16"); -+module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, -+ 0444); -+MODULE_PARM_DESC(dev_endpoints, -+ "The number of endpoints in addition to EP0 available for device mode 1-15"); -+module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444); -+MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI"); -+module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, -+ 0444); -+MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits"); -+module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444); -+MODULE_PARM_DESC(phy_ulpi_ddr, -+ "ULPI at double or single data rate 0=Single 1=Double"); -+module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, -+ int, 0444); -+MODULE_PARM_DESC(phy_ulpi_ext_vbus, -+ "ULPI PHY using internal or external vbus 0=Internal"); -+module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444); -+MODULE_PARM_DESC(i2c_enable, "FS PHY Interface"); -+module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444); -+MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only"); -+module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444); -+MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs"); -+module_param_named(debug, g_dbg_lvl, int, 0444); -+MODULE_PARM_DESC(debug, ""); -+ -+module_param_named(en_multiple_tx_fifo, -+ dwc_otg_module_params.en_multiple_tx_fifo, int, 0444); -+MODULE_PARM_DESC(en_multiple_tx_fifo, -+ "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled"); -+module_param_named(dev_tx_fifo_size_1, -+ dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_2, -+ dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_3, -+ dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_4, -+ dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_5, -+ dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_6, -+ dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_7, -+ dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_8, -+ dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_9, -+ dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_10, -+ dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_11, -+ dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_12, -+ dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_13, -+ dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_14, -+ dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_15, -+ dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768"); -+ -+module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444); -+MODULE_PARM_DESC(thr_ctl, -+ "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled"); -+module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, -+ 0444); -+MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs"); -+module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, -+ 0444); -+MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs"); -+ -+module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444); -+module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444); -+module_param_named(lpm_enable, dwc_otg_module_params.lpm_enable, int, 0444); -+MODULE_PARM_DESC(lpm_enable, "LPM Enable 0=LPM Disabled 1=LPM Enabled"); -+module_param_named(ic_usb_cap, dwc_otg_module_params.ic_usb_cap, int, 0444); -+MODULE_PARM_DESC(ic_usb_cap, -+ "IC_USB Capability 0=IC_USB Disabled 1=IC_USB Enabled"); -+module_param_named(ahb_thr_ratio, dwc_otg_module_params.ahb_thr_ratio, int, -+ 0444); -+MODULE_PARM_DESC(ahb_thr_ratio, "AHB Threshold Ratio"); -+module_param_named(power_down, dwc_otg_module_params.power_down, int, 0444); -+MODULE_PARM_DESC(power_down, "Power Down Mode"); -+module_param_named(reload_ctl, dwc_otg_module_params.reload_ctl, int, 0444); -+MODULE_PARM_DESC(reload_ctl, "HFIR Reload Control"); -+module_param_named(dev_out_nak, dwc_otg_module_params.dev_out_nak, int, 0444); -+MODULE_PARM_DESC(dev_out_nak, "Enable Device OUT NAK"); -+module_param_named(cont_on_bna, dwc_otg_module_params.cont_on_bna, int, 0444); -+MODULE_PARM_DESC(cont_on_bna, "Enable Enable Continue on BNA"); -+module_param_named(ahb_single, dwc_otg_module_params.ahb_single, int, 0444); -+MODULE_PARM_DESC(ahb_single, "Enable AHB Single Support"); -+module_param_named(adp_enable, dwc_otg_module_params.adp_enable, int, 0444); -+MODULE_PARM_DESC(adp_enable, "ADP Enable 0=ADP Disabled 1=ADP Enabled"); -+module_param_named(otg_ver, dwc_otg_module_params.otg_ver, int, 0444); -+MODULE_PARM_DESC(otg_ver, "OTG revision supported 0=OTG 1.3 1=OTG 2.0"); -+module_param(microframe_schedule, bool, 0444); -+MODULE_PARM_DESC(microframe_schedule, "Enable the microframe scheduler"); -+ -+module_param(fiq_enable, bool, 0444); -+MODULE_PARM_DESC(fiq_enable, "Enable the FIQ"); -+module_param(nak_holdoff, ushort, 0644); -+MODULE_PARM_DESC(nak_holdoff, "Throttle duration for bulk split-transaction endpoints on a NAK. Default 8"); -+module_param(fiq_fsm_enable, bool, 0444); -+MODULE_PARM_DESC(fiq_fsm_enable, "Enable the FIQ to perform split transactions as defined by fiq_fsm_mask"); -+module_param(fiq_fsm_mask, ushort, 0444); -+MODULE_PARM_DESC(fiq_fsm_mask, "Bitmask of transactions to perform in the FIQ.\n" -+ "Bit 0 : Non-periodic split transactions\n" -+ "Bit 1 : Periodic split transactions\n" -+ "Bit 2 : High-speed multi-transfer isochronous\n" -+ "All other bits should be set 0."); -+ -+ -+/** @page "Module Parameters" -+ * -+ * The following parameters may be specified when starting the module. -+ * These parameters define how the DWC_otg controller should be -+ * configured. Parameter values are passed to the CIL initialization -+ * function dwc_otg_cil_init -+ * -+ * Example: modprobe dwc_otg speed=1 otg_cap=1 -+ * -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+*/ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.h -@@ -0,0 +1,86 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $ -+ * $Revision: #19 $ -+ * $Date: 2010/11/15 $ -+ * $Change: 1627671 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#ifndef __DWC_OTG_DRIVER_H__ -+#define __DWC_OTG_DRIVER_H__ -+ -+/** @file -+ * This file contains the interface to the Linux driver. -+ */ -+#include "dwc_otg_os_dep.h" -+#include "dwc_otg_core_if.h" -+ -+/* Type declarations */ -+struct dwc_otg_pcd; -+struct dwc_otg_hcd; -+ -+/** -+ * This structure is a wrapper that encapsulates the driver components used to -+ * manage a single DWC_otg controller. -+ */ -+typedef struct dwc_otg_device { -+ /** Structure containing OS-dependent stuff. KEEP THIS STRUCT AT THE -+ * VERY BEGINNING OF THE DEVICE STRUCT. OSes such as FreeBSD and NetBSD -+ * require this. */ -+ struct os_dependent os_dep; -+ -+ /** Pointer to the core interface structure. */ -+ dwc_otg_core_if_t *core_if; -+ -+ /** Pointer to the PCD structure. */ -+ struct dwc_otg_pcd *pcd; -+ -+ /** Pointer to the HCD structure. */ -+ struct dwc_otg_hcd *hcd; -+ -+ /** Flag to indicate whether the common IRQ handler is installed. */ -+ uint8_t common_irq_installed; -+ -+} dwc_otg_device_t; -+ -+/*We must clear S3C24XX_EINTPEND external interrupt register -+ * because after clearing in this register trigerred IRQ from -+ * H/W core in kernel interrupt can be occured again before OTG -+ * handlers clear all IRQ sources of Core registers because of -+ * timing latencies and Low Level IRQ Type. -+ */ -+#ifdef CONFIG_MACH_IPMATE -+#define S3C2410X_CLEAR_EINTPEND() \ -+do { \ -+ __raw_writel(1UL << 11,S3C24XX_EINTPEND); \ -+} while (0) -+#else -+#define S3C2410X_CLEAR_EINTPEND() do { } while (0) -+#endif -+ -+#endif ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c -@@ -0,0 +1,1355 @@ -+/* -+ * dwc_otg_fiq_fsm.c - The finite state machine FIQ -+ * -+ * Copyright (c) 2013 Raspberry Pi Foundation -+ * -+ * Author: Jonathan Bell -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions are met: -+ * * Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * * Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * * Neither the name of Raspberry Pi nor the -+ * names of its contributors may be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+ * DISCLAIMED. IN NO EVENT SHALL BE LIABLE FOR ANY -+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * This FIQ implements functionality that performs split transactions on -+ * the dwc_otg hardware without any outside intervention. A split transaction -+ * is "queued" by nominating a specific host channel to perform the entirety -+ * of a split transaction. This FIQ will then perform the microframe-precise -+ * scheduling required in each phase of the transaction until completion. -+ * -+ * The FIQ functionality is glued into the Synopsys driver via the entry point -+ * in the FSM enqueue function, and at the exit point in handling a HC interrupt -+ * for a FSM-enabled channel. -+ * -+ * NB: Large parts of this implementation have architecture-specific code. -+ * For porting this functionality to other ARM machines, the minimum is required: -+ * - An interrupt controller allowing the top-level dwc USB interrupt to be routed -+ * to the FIQ -+ * - A method of forcing a software generated interrupt from FIQ mode that then -+ * triggers an IRQ entry (with the dwc USB handler called by this IRQ number) -+ * - Guaranteed interrupt routing such that both the FIQ and SGI occur on the same -+ * processor core - there is no locking between the FIQ and IRQ (aside from -+ * local_fiq_disable) -+ * -+ */ -+ -+#include "dwc_otg_fiq_fsm.h" -+ -+ -+char buffer[1000*16]; -+int wptr; -+void notrace _fiq_print(enum fiq_debug_level dbg_lvl, volatile struct fiq_state *state, char *fmt, ...) -+{ -+ enum fiq_debug_level dbg_lvl_req = FIQDBG_ERR; -+ va_list args; -+ char text[17]; -+ hfnum_data_t hfnum = { .d32 = FIQ_READ(state->dwc_regs_base + 0x408) }; -+ -+ if((dbg_lvl & dbg_lvl_req) || dbg_lvl == FIQDBG_ERR) -+ { -+ snprintf(text, 9, " %4d:%1u ", hfnum.b.frnum/8, hfnum.b.frnum & 7); -+ va_start(args, fmt); -+ vsnprintf(text+8, 9, fmt, args); -+ va_end(args); -+ -+ memcpy(buffer + wptr, text, 16); -+ wptr = (wptr + 16) % sizeof(buffer); -+ } -+} -+ -+/** -+ * fiq_fsm_spin_lock() - ARMv6+ bare bones spinlock -+ * Must be called with local interrupts and FIQ disabled. -+ */ -+#if defined(CONFIG_ARCH_BCM2835) && defined(CONFIG_SMP) -+inline void fiq_fsm_spin_lock(fiq_lock_t *lock) -+{ -+ unsigned long tmp; -+ uint32_t newval; -+ fiq_lock_t lockval; -+ smp_mb__before_spinlock(); -+ /* Nested locking, yay. If we are on the same CPU as the fiq, then the disable -+ * will be sufficient. If we are on a different CPU, then the lock protects us. */ -+ prefetchw(&lock->slock); -+ asm volatile ( -+ "1: ldrex %0, [%3]\n" -+ " add %1, %0, %4\n" -+ " strex %2, %1, [%3]\n" -+ " teq %2, #0\n" -+ " bne 1b" -+ : "=&r" (lockval), "=&r" (newval), "=&r" (tmp) -+ : "r" (&lock->slock), "I" (1 << 16) -+ : "cc"); -+ -+ while (lockval.tickets.next != lockval.tickets.owner) { -+ wfe(); -+ lockval.tickets.owner = ACCESS_ONCE(lock->tickets.owner); -+ } -+ smp_mb(); -+} -+#else -+inline void fiq_fsm_spin_lock(fiq_lock_t *lock) { } -+#endif -+ -+/** -+ * fiq_fsm_spin_unlock() - ARMv6+ bare bones spinunlock -+ */ -+#if defined(CONFIG_ARCH_BCM2835) && defined(CONFIG_SMP) -+inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) -+{ -+ smp_mb(); -+ lock->tickets.owner++; -+ dsb_sev(); -+} -+#else -+inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) { } -+#endif -+ -+/** -+ * fiq_fsm_restart_channel() - Poke channel enable bit for a split transaction -+ * @channel: channel to re-enable -+ */ -+static void fiq_fsm_restart_channel(struct fiq_state *st, int n, int force) -+{ -+ hcchar_data_t hcchar = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR) }; -+ -+ hcchar.b.chen = 0; -+ if (st->channel[n].hcchar_copy.b.eptype & 0x1) { -+ hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) }; -+ /* Hardware bug workaround: update the ssplit index */ -+ if (st->channel[n].hcsplt_copy.b.spltena) -+ st->channel[n].expected_uframe = (hfnum.b.frnum + 1) & 0x3FFF; -+ -+ hcchar.b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1; -+ } -+ -+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, hcchar.d32); -+ hcchar.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); -+ hcchar.b.chen = 1; -+ -+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, hcchar.d32); -+ fiq_print(FIQDBG_INT, st, "HCGO %01d %01d", n, force); -+} -+ -+/** -+ * fiq_fsm_setup_csplit() - Prepare a host channel for a CSplit transaction stage -+ * @st: Pointer to the channel's state -+ * @n : channel number -+ * -+ * Change host channel registers to perform a complete-split transaction. Being mindful of the -+ * endpoint direction, set control regs up correctly. -+ */ -+static void notrace fiq_fsm_setup_csplit(struct fiq_state *st, int n) -+{ -+ hcsplt_data_t hcsplt = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT) }; -+ hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) }; -+ -+ hcsplt.b.compsplt = 1; -+ if (st->channel[n].hcchar_copy.b.epdir == 1) { -+ // If IN, the CSPLIT result contains the data or a hub handshake. hctsiz = maxpacket. -+ hctsiz.b.xfersize = st->channel[n].hctsiz_copy.b.xfersize; -+ } else { -+ // If OUT, the CSPLIT result contains handshake only. -+ hctsiz.b.xfersize = 0; -+ } -+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT, hcsplt.d32); -+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32); -+ mb(); -+} -+ -+static inline int notrace fiq_get_xfer_len(struct fiq_state *st, int n) -+{ -+ /* The xfersize register is a bit wonky. For IN transfers, it decrements by the packet size. */ -+ hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) }; -+ -+ if (st->channel[n].hcchar_copy.b.epdir == 0) { -+ return st->channel[n].hctsiz_copy.b.xfersize; -+ } else { -+ return st->channel[n].hctsiz_copy.b.xfersize - hctsiz.b.xfersize; -+ } -+ -+} -+ -+ -+/** -+ * fiq_increment_dma_buf() - update DMA address for bounce buffers after a CSPLIT -+ * -+ * Of use only for IN periodic transfers. -+ */ -+static int notrace fiq_increment_dma_buf(struct fiq_state *st, int num_channels, int n) -+{ -+ hcdma_data_t hcdma; -+ int i = st->channel[n].dma_info.index; -+ int len; -+ struct fiq_dma_blob *blob = (struct fiq_dma_blob *) st->dma_base; -+ -+ len = fiq_get_xfer_len(st, n); -+ fiq_print(FIQDBG_INT, st, "LEN: %03d", len); -+ st->channel[n].dma_info.slot_len[i] = len; -+ i++; -+ if (i > 6) -+ BUG(); -+ -+ hcdma.d32 = (dma_addr_t) &blob->channel[n].index[i].buf[0]; -+ FIQ_WRITE(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32); -+ st->channel[n].dma_info.index = i; -+ return 0; -+} -+ -+/** -+ * fiq_reload_hctsiz() - for IN transactions, reset HCTSIZ -+ */ -+static void notrace fiq_fsm_reload_hctsiz(struct fiq_state *st, int n) -+{ -+ hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) }; -+ hctsiz.b.xfersize = st->channel[n].hctsiz_copy.b.xfersize; -+ hctsiz.b.pktcnt = 1; -+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32); -+} -+ -+/** -+ * fiq_iso_out_advance() - update DMA address and split position bits -+ * for isochronous OUT transactions. -+ * -+ * Returns 1 if this is the last packet queued, 0 otherwise. Split-ALL and -+ * Split-BEGIN states are not handled - this is done when the transaction was queued. -+ * -+ * This function must only be called from the FIQ_ISO_OUT_ACTIVE state. -+ */ -+static int notrace fiq_iso_out_advance(struct fiq_state *st, int num_channels, int n) -+{ -+ hcsplt_data_t hcsplt; -+ hctsiz_data_t hctsiz; -+ hcdma_data_t hcdma; -+ struct fiq_dma_blob *blob = (struct fiq_dma_blob *) st->dma_base; -+ int last = 0; -+ int i = st->channel[n].dma_info.index; -+ -+ fiq_print(FIQDBG_INT, st, "ADV %01d %01d ", n, i); -+ i++; -+ if (i == 4) -+ last = 1; -+ if (st->channel[n].dma_info.slot_len[i+1] == 255) -+ last = 1; -+ -+ /* New DMA address - address of bounce buffer referred to in index */ -+ hcdma.d32 = (uint32_t) &blob->channel[n].index[i].buf[0]; -+ //hcdma.d32 = FIQ_READ(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n)); -+ //hcdma.d32 += st->channel[n].dma_info.slot_len[i]; -+ fiq_print(FIQDBG_INT, st, "LAST: %01d ", last); -+ fiq_print(FIQDBG_INT, st, "LEN: %03d", st->channel[n].dma_info.slot_len[i]); -+ hcsplt.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT); -+ hctsiz.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ); -+ hcsplt.b.xactpos = (last) ? ISOC_XACTPOS_END : ISOC_XACTPOS_MID; -+ /* Set up new packet length */ -+ hctsiz.b.pktcnt = 1; -+ hctsiz.b.xfersize = st->channel[n].dma_info.slot_len[i]; -+ fiq_print(FIQDBG_INT, st, "%08x", hctsiz.d32); -+ -+ st->channel[n].dma_info.index++; -+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT, hcsplt.d32); -+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32); -+ FIQ_WRITE(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32); -+ return last; -+} -+ -+/** -+ * fiq_fsm_tt_next_isoc() - queue next pending isochronous out start-split on a TT -+ * -+ * Despite the limitations of the DWC core, we can force a microframe pipeline of -+ * isochronous OUT start-split transactions while waiting for a corresponding other-type -+ * of endpoint to finish its CSPLITs. TTs have big periodic buffers therefore it -+ * is very unlikely that filling the start-split FIFO will cause data loss. -+ * This allows much better interleaving of transactions in an order-independent way- -+ * there is no requirement to prioritise isochronous, just a state-space search has -+ * to be performed on each periodic start-split complete interrupt. -+ */ -+static int notrace fiq_fsm_tt_next_isoc(struct fiq_state *st, int num_channels, int n) -+{ -+ int hub_addr = st->channel[n].hub_addr; -+ int port_addr = st->channel[n].port_addr; -+ int i, poked = 0; -+ for (i = 0; i < num_channels; i++) { -+ if (i == n || st->channel[i].fsm == FIQ_PASSTHROUGH) -+ continue; -+ if (st->channel[i].hub_addr == hub_addr && -+ st->channel[i].port_addr == port_addr) { -+ switch (st->channel[i].fsm) { -+ case FIQ_PER_ISO_OUT_PENDING: -+ if (st->channel[i].nrpackets == 1) { -+ st->channel[i].fsm = FIQ_PER_ISO_OUT_LAST; -+ } else { -+ st->channel[i].fsm = FIQ_PER_ISO_OUT_ACTIVE; -+ } -+ fiq_fsm_restart_channel(st, i, 0); -+ poked = 1; -+ break; -+ -+ default: -+ break; -+ } -+ } -+ if (poked) -+ break; -+ } -+ return poked; -+} -+ -+/** -+ * fiq_fsm_tt_in_use() - search for host channels using this TT -+ * @n: Channel to use as reference -+ * -+ */ -+int notrace noinline fiq_fsm_tt_in_use(struct fiq_state *st, int num_channels, int n) -+{ -+ int hub_addr = st->channel[n].hub_addr; -+ int port_addr = st->channel[n].port_addr; -+ int i, in_use = 0; -+ for (i = 0; i < num_channels; i++) { -+ if (i == n || st->channel[i].fsm == FIQ_PASSTHROUGH) -+ continue; -+ switch (st->channel[i].fsm) { -+ /* TT is reserved for channels that are in the middle of a periodic -+ * split transaction. -+ */ -+ case FIQ_PER_SSPLIT_STARTED: -+ case FIQ_PER_CSPLIT_WAIT: -+ case FIQ_PER_CSPLIT_NYET1: -+ //case FIQ_PER_CSPLIT_POLL: -+ case FIQ_PER_ISO_OUT_ACTIVE: -+ case FIQ_PER_ISO_OUT_LAST: -+ if (st->channel[i].hub_addr == hub_addr && -+ st->channel[i].port_addr == port_addr) { -+ in_use = 1; -+ } -+ break; -+ default: -+ break; -+ } -+ if (in_use) -+ break; -+ } -+ return in_use; -+} -+ -+/** -+ * fiq_fsm_more_csplits() - determine whether additional CSPLITs need -+ * to be issued for this IN transaction. -+ * -+ * We cannot tell the inbound PID of a data packet due to hardware limitations. -+ * we need to make an educated guess as to whether we need to queue another CSPLIT -+ * or not. A no-brainer is when we have received enough data to fill the endpoint -+ * size, but for endpoints that give variable-length data then we have to resort -+ * to heuristics. -+ * -+ * We also return whether this is the last CSPLIT to be queued, again based on -+ * heuristics. This is to allow a 1-uframe overlap of periodic split transactions. -+ * Note: requires at least 1 CSPLIT to have been performed prior to being called. -+ */ -+ -+/* -+ * We need some way of guaranteeing if a returned periodic packet of size X -+ * has a DATA0 PID. -+ * The heuristic value of 144 bytes assumes that the received data has maximal -+ * bit-stuffing and the clock frequency of the transmitting device is at the lowest -+ * permissible limit. If the transfer length results in a final packet size -+ * 144 < p <= 188, then an erroneous CSPLIT will be issued. -+ * Also used to ensure that an endpoint will nominally only return a single -+ * complete-split worth of data. -+ */ -+#define DATA0_PID_HEURISTIC 144 -+ -+static int notrace noinline fiq_fsm_more_csplits(struct fiq_state *state, int n, int *probably_last) -+{ -+ -+ int i; -+ int total_len = 0; -+ int more_needed = 1; -+ struct fiq_channel_state *st = &state->channel[n]; -+ -+ for (i = 0; i < st->dma_info.index; i++) { -+ total_len += st->dma_info.slot_len[i]; -+ } -+ -+ *probably_last = 0; -+ -+ if (st->hcchar_copy.b.eptype == 0x3) { -+ /* -+ * An interrupt endpoint will take max 2 CSPLITs. if we are receiving data -+ * then this is definitely the last CSPLIT. -+ */ -+ *probably_last = 1; -+ } else { -+ /* Isoc IN. This is a bit risky if we are the first transaction: -+ * we may have been held off slightly. */ -+ if (i > 1 && st->dma_info.slot_len[st->dma_info.index-1] <= DATA0_PID_HEURISTIC) { -+ more_needed = 0; -+ } -+ /* If in the next uframe we will receive enough data to fill the endpoint, -+ * then only issue 1 more csplit. -+ */ -+ if (st->hctsiz_copy.b.xfersize - total_len <= DATA0_PID_HEURISTIC) -+ *probably_last = 1; -+ } -+ -+ if (total_len >= st->hctsiz_copy.b.xfersize || -+ i == 6 || total_len == 0) -+ /* Note: due to bit stuffing it is possible to have > 6 CSPLITs for -+ * a single endpoint. Accepting more would completely break our scheduling mechanism though -+ * - in these extreme cases we will pass through a truncated packet. -+ */ -+ more_needed = 0; -+ -+ return more_needed; -+} -+ -+/** -+ * fiq_fsm_too_late() - Test transaction for lateness -+ * -+ * If a SSPLIT for a large IN transaction is issued too late in a frame, -+ * the hub will disable the port to the device and respond with ERR handshakes. -+ * The hub status endpoint will not reflect this change. -+ * Returns 1 if we will issue a SSPLIT that will result in a device babble. -+ */ -+int notrace fiq_fsm_too_late(struct fiq_state *st, int n) -+{ -+ int uframe; -+ hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) }; -+ uframe = hfnum.b.frnum & 0x7; -+ if ((uframe < 6) && (st->channel[n].nrpackets + 1 + uframe > 7)) { -+ return 1; -+ } else { -+ return 0; -+ } -+} -+ -+ -+/** -+ * fiq_fsm_start_next_periodic() - A half-arsed attempt at a microframe pipeline -+ * -+ * Search pending transactions in the start-split pending state and queue them. -+ * Don't queue packets in uframe .5 (comes out in .6) (USB2.0 11.18.4). -+ * Note: we specifically don't do isochronous OUT transactions first because better -+ * use of the TT's start-split fifo can be achieved by pipelining an IN before an OUT. -+ */ -+static void notrace noinline fiq_fsm_start_next_periodic(struct fiq_state *st, int num_channels) -+{ -+ int n; -+ hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) }; -+ if ((hfnum.b.frnum & 0x7) == 5) -+ return; -+ for (n = 0; n < num_channels; n++) { -+ if (st->channel[n].fsm == FIQ_PER_SSPLIT_QUEUED) { -+ /* Check to see if any other transactions are using this TT */ -+ if(!fiq_fsm_tt_in_use(st, num_channels, n)) { -+ if (!fiq_fsm_too_late(st, n)) { -+ st->channel[n].fsm = FIQ_PER_SSPLIT_STARTED; -+ fiq_print(FIQDBG_INT, st, "NEXTPER "); -+ fiq_fsm_restart_channel(st, n, 0); -+ } else { -+ st->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT; -+ } -+ break; -+ } -+ } -+ } -+ for (n = 0; n < num_channels; n++) { -+ if (st->channel[n].fsm == FIQ_PER_ISO_OUT_PENDING) { -+ if (!fiq_fsm_tt_in_use(st, num_channels, n)) { -+ fiq_print(FIQDBG_INT, st, "NEXTISO "); -+ st->channel[n].fsm = FIQ_PER_ISO_OUT_ACTIVE; -+ fiq_fsm_restart_channel(st, n, 0); -+ break; -+ } -+ } -+ } -+} -+ -+/** -+ * fiq_fsm_update_hs_isoc() - update isochronous frame and transfer data -+ * @state: Pointer to fiq_state -+ * @n: Channel transaction is active on -+ * @hcint: Copy of host channel interrupt register -+ * -+ * Returns 0 if there are no more transactions for this HC to do, 1 -+ * otherwise. -+ */ -+static int notrace noinline fiq_fsm_update_hs_isoc(struct fiq_state *state, int n, hcint_data_t hcint) -+{ -+ struct fiq_channel_state *st = &state->channel[n]; -+ int xfer_len = 0, nrpackets = 0; -+ hcdma_data_t hcdma; -+ fiq_print(FIQDBG_INT, state, "HSISO %02d", n); -+ -+ xfer_len = fiq_get_xfer_len(state, n); -+ st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].actual_length = xfer_len; -+ -+ st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].status = hcint.d32; -+ -+ st->hs_isoc_info.index++; -+ if (st->hs_isoc_info.index == st->hs_isoc_info.nrframes) { -+ return 0; -+ } -+ -+ /* grab the next DMA address offset from the array */ -+ hcdma.d32 = st->hcdma_copy.d32 + st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].offset; -+ FIQ_WRITE(state->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32); -+ -+ /* We need to set multi_count. This is a bit tricky - has to be set per-transaction as -+ * the core needs to be told to send the correct number. Caution: for IN transfers, -+ * this is always set to the maximum size of the endpoint. */ -+ xfer_len = st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].length; -+ /* Integer divide in a FIQ: fun. FIXME: make this not suck */ -+ nrpackets = (xfer_len + st->hcchar_copy.b.mps - 1) / st->hcchar_copy.b.mps; -+ if (nrpackets == 0) -+ nrpackets = 1; -+ st->hcchar_copy.b.multicnt = nrpackets; -+ st->hctsiz_copy.b.pktcnt = nrpackets; -+ -+ /* Initial PID also needs to be set */ -+ if (st->hcchar_copy.b.epdir == 0) { -+ st->hctsiz_copy.b.xfersize = xfer_len; -+ switch (st->hcchar_copy.b.multicnt) { -+ case 1: -+ st->hctsiz_copy.b.pid = DWC_PID_DATA0; -+ break; -+ case 2: -+ case 3: -+ st->hctsiz_copy.b.pid = DWC_PID_MDATA; -+ break; -+ } -+ -+ } else { -+ switch (st->hcchar_copy.b.multicnt) { -+ st->hctsiz_copy.b.xfersize = nrpackets * st->hcchar_copy.b.mps; -+ case 1: -+ st->hctsiz_copy.b.pid = DWC_PID_DATA0; -+ break; -+ case 2: -+ st->hctsiz_copy.b.pid = DWC_PID_DATA1; -+ break; -+ case 3: -+ st->hctsiz_copy.b.pid = DWC_PID_DATA2; -+ break; -+ } -+ } -+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, st->hctsiz_copy.d32); -+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, st->hcchar_copy.d32); -+ /* Channel is enabled on hcint handler exit */ -+ fiq_print(FIQDBG_INT, state, "HSISOOUT"); -+ return 1; -+} -+ -+ -+/** -+ * fiq_fsm_do_sof() - FSM start-of-frame interrupt handler -+ * @state: Pointer to the state struct passed from banked FIQ mode registers. -+ * @num_channels: set according to the DWC hardware configuration -+ * -+ * The SOF handler in FSM mode has two functions -+ * 1. Hold off SOF from causing schedule advancement in IRQ context if there's -+ * nothing to do -+ * 2. Advance certain FSM states that require either a microframe delay, or a microframe -+ * of holdoff. -+ * -+ * The second part is architecture-specific to mach-bcm2835 - -+ * a sane interrupt controller would have a mask register for ARM interrupt sources -+ * to be promoted to the nFIQ line, but it doesn't. Instead a single interrupt -+ * number (USB) can be enabled. This means that certain parts of the USB specification -+ * that require "wait a little while, then issue another packet" cannot be fulfilled with -+ * the timing granularity required to achieve optimal throughout. The workaround is to use -+ * the SOF "timer" (125uS) to perform this task. -+ */ -+static int notrace noinline fiq_fsm_do_sof(struct fiq_state *state, int num_channels) -+{ -+ hfnum_data_t hfnum = { .d32 = FIQ_READ(state->dwc_regs_base + HFNUM) }; -+ int n; -+ int kick_irq = 0; -+ -+ if ((hfnum.b.frnum & 0x7) == 1) { -+ /* We cannot issue csplits for transactions in the last frame past (n+1).1 -+ * Check to see if there are any transactions that are stale. -+ * Boot them out. -+ */ -+ for (n = 0; n < num_channels; n++) { -+ switch (state->channel[n].fsm) { -+ case FIQ_PER_CSPLIT_WAIT: -+ case FIQ_PER_CSPLIT_NYET1: -+ case FIQ_PER_CSPLIT_POLL: -+ case FIQ_PER_CSPLIT_LAST: -+ /* Check if we are no longer in the same full-speed frame. */ -+ if (((state->channel[n].expected_uframe & 0x3FFF) & ~0x7) < -+ (hfnum.b.frnum & ~0x7)) -+ state->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT; -+ break; -+ default: -+ break; -+ } -+ } -+ } -+ -+ for (n = 0; n < num_channels; n++) { -+ switch (state->channel[n].fsm) { -+ -+ case FIQ_NP_SSPLIT_RETRY: -+ case FIQ_NP_IN_CSPLIT_RETRY: -+ case FIQ_NP_OUT_CSPLIT_RETRY: -+ fiq_fsm_restart_channel(state, n, 0); -+ break; -+ -+ case FIQ_HS_ISOC_SLEEPING: -+ /* Is it time to wake this channel yet? */ -+ if (--state->channel[n].uframe_sleeps == 0) { -+ state->channel[n].fsm = FIQ_HS_ISOC_TURBO; -+ fiq_fsm_restart_channel(state, n, 0); -+ } -+ break; -+ -+ case FIQ_PER_SSPLIT_QUEUED: -+ if ((hfnum.b.frnum & 0x7) == 5) -+ break; -+ if(!fiq_fsm_tt_in_use(state, num_channels, n)) { -+ if (!fiq_fsm_too_late(state, n)) { -+ fiq_print(FIQDBG_INT, state, "SOF GO %01d", n); -+ fiq_fsm_restart_channel(state, n, 0); -+ state->channel[n].fsm = FIQ_PER_SSPLIT_STARTED; -+ } else { -+ /* Transaction cannot be started without risking a device babble error */ -+ state->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT; -+ state->haintmsk_saved.b2.chint &= ~(1 << n); -+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, 0); -+ kick_irq |= 1; -+ } -+ } -+ break; -+ -+ case FIQ_PER_ISO_OUT_PENDING: -+ /* Ordinarily, this should be poked after the SSPLIT -+ * complete interrupt for a competing transfer on the same -+ * TT. Doesn't happen for aborted transactions though. -+ */ -+ if ((hfnum.b.frnum & 0x7) >= 5) -+ break; -+ if (!fiq_fsm_tt_in_use(state, num_channels, n)) { -+ /* Hardware bug. SOF can sometimes occur after the channel halt interrupt -+ * that caused this. -+ */ -+ fiq_fsm_restart_channel(state, n, 0); -+ fiq_print(FIQDBG_INT, state, "SOF ISOC"); -+ if (state->channel[n].nrpackets == 1) { -+ state->channel[n].fsm = FIQ_PER_ISO_OUT_LAST; -+ } else { -+ state->channel[n].fsm = FIQ_PER_ISO_OUT_ACTIVE; -+ } -+ } -+ break; -+ -+ case FIQ_PER_CSPLIT_WAIT: -+ /* we are guaranteed to be in this state if and only if the SSPLIT interrupt -+ * occurred when the bus transaction occurred. The SOF interrupt reversal bug -+ * will utterly bugger this up though. -+ */ -+ if (hfnum.b.frnum != state->channel[n].expected_uframe) { -+ fiq_print(FIQDBG_INT, state, "SOFCS %d ", n); -+ state->channel[n].fsm = FIQ_PER_CSPLIT_POLL; -+ fiq_fsm_restart_channel(state, n, 0); -+ fiq_fsm_start_next_periodic(state, num_channels); -+ -+ } -+ break; -+ -+ case FIQ_PER_SPLIT_TIMEOUT: -+ case FIQ_DEQUEUE_ISSUED: -+ /* Ugly: we have to force a HCD interrupt. -+ * Poke the mask for the channel in question. -+ * We will take a fake SOF because of this, but -+ * that's OK. -+ */ -+ state->haintmsk_saved.b2.chint &= ~(1 << n); -+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, 0); -+ kick_irq |= 1; -+ break; -+ -+ default: -+ break; -+ } -+ } -+ -+ if (state->kick_np_queues || -+ dwc_frame_num_le(state->next_sched_frame, hfnum.b.frnum)) -+ kick_irq |= 1; -+ -+ return !kick_irq; -+} -+ -+ -+/** -+ * fiq_fsm_do_hcintr() - FSM host channel interrupt handler -+ * @state: Pointer to the FIQ state struct -+ * @num_channels: Number of channels as per hardware config -+ * @n: channel for which HAINT(i) was raised -+ * -+ * An important property is that only the CHHLT interrupt is unmasked. Unfortunately, AHBerr is as well. -+ */ -+static int notrace noinline fiq_fsm_do_hcintr(struct fiq_state *state, int num_channels, int n) -+{ -+ hcint_data_t hcint; -+ hcintmsk_data_t hcintmsk; -+ hcint_data_t hcint_probe; -+ hcchar_data_t hcchar; -+ int handled = 0; -+ int restart = 0; -+ int last_csplit = 0; -+ int start_next_periodic = 0; -+ struct fiq_channel_state *st = &state->channel[n]; -+ hfnum_data_t hfnum; -+ -+ hcint.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINT); -+ hcintmsk.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK); -+ hcint_probe.d32 = hcint.d32 & hcintmsk.d32; -+ -+ if (st->fsm != FIQ_PASSTHROUGH) { -+ fiq_print(FIQDBG_INT, state, "HC%01d ST%02d", n, st->fsm); -+ fiq_print(FIQDBG_INT, state, "%08x", hcint.d32); -+ } -+ -+ switch (st->fsm) { -+ -+ case FIQ_PASSTHROUGH: -+ case FIQ_DEQUEUE_ISSUED: -+ /* doesn't belong to us, kick it upstairs */ -+ break; -+ -+ case FIQ_PASSTHROUGH_ERRORSTATE: -+ /* We are here to emulate the error recovery mechanism of the dwc HCD. -+ * Several interrupts are unmasked if a previous transaction failed - it's -+ * death for the FIQ to attempt to handle them as the channel isn't halted. -+ * Emulate what the HCD does in this situation: mask and continue. -+ * The FSM has no other state setup so this has to be handled out-of-band. -+ */ -+ fiq_print(FIQDBG_ERR, state, "ERRST %02d", n); -+ if (hcint_probe.b.nak || hcint_probe.b.ack || hcint_probe.b.datatglerr) { -+ fiq_print(FIQDBG_ERR, state, "RESET %02d", n); -+ /* In some random cases we can get a NAK interrupt coincident with a Xacterr -+ * interrupt, after the device has disappeared. -+ */ -+ if (!hcint.b.xacterr) -+ st->nr_errors = 0; -+ hcintmsk.b.nak = 0; -+ hcintmsk.b.ack = 0; -+ hcintmsk.b.datatglerr = 0; -+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, hcintmsk.d32); -+ return 1; -+ } -+ if (hcint_probe.b.chhltd) { -+ fiq_print(FIQDBG_ERR, state, "CHHLT %02d", n); -+ fiq_print(FIQDBG_ERR, state, "%08x", hcint.d32); -+ return 0; -+ } -+ break; -+ -+ /* Non-periodic state groups */ -+ case FIQ_NP_SSPLIT_STARTED: -+ case FIQ_NP_SSPLIT_RETRY: -+ /* Got a HCINT for a NP SSPLIT. Expected ACK / NAK / fail */ -+ if (hcint.b.ack) { -+ /* SSPLIT complete. For OUT, the data has been sent. For IN, the LS transaction -+ * will start shortly. SOF needs to kick the transaction to prevent a NYET flood. -+ */ -+ if(st->hcchar_copy.b.epdir == 1) -+ st->fsm = FIQ_NP_IN_CSPLIT_RETRY; -+ else -+ st->fsm = FIQ_NP_OUT_CSPLIT_RETRY; -+ st->nr_errors = 0; -+ handled = 1; -+ fiq_fsm_setup_csplit(state, n); -+ } else if (hcint.b.nak) { -+ // No buffer space in TT. Retry on a uframe boundary. -+ st->fsm = FIQ_NP_SSPLIT_RETRY; -+ handled = 1; -+ } else if (hcint.b.xacterr) { -+ // The only other one we care about is xacterr. This implies HS bus error - retry. -+ st->nr_errors++; -+ st->fsm = FIQ_NP_SSPLIT_RETRY; -+ if (st->nr_errors >= 3) { -+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; -+ } else { -+ handled = 1; -+ restart = 1; -+ } -+ } else { -+ st->fsm = FIQ_NP_SPLIT_LS_ABORTED; -+ handled = 0; -+ restart = 0; -+ } -+ break; -+ -+ case FIQ_NP_IN_CSPLIT_RETRY: -+ /* Received a CSPLIT done interrupt. -+ * Expected Data/NAK/STALL/NYET for IN. -+ */ -+ if (hcint.b.xfercomp) { -+ /* For IN, data is present. */ -+ st->fsm = FIQ_NP_SPLIT_DONE; -+ } else if (hcint.b.nak) { -+ /* no endpoint data. Punt it upstairs */ -+ st->fsm = FIQ_NP_SPLIT_DONE; -+ } else if (hcint.b.nyet) { -+ /* CSPLIT NYET - retry on a uframe boundary. */ -+ handled = 1; -+ st->nr_errors = 0; -+ } else if (hcint.b.datatglerr) { -+ /* data toggle errors do not set the xfercomp bit. */ -+ st->fsm = FIQ_NP_SPLIT_LS_ABORTED; -+ } else if (hcint.b.xacterr) { -+ /* HS error. Retry immediate */ -+ st->fsm = FIQ_NP_IN_CSPLIT_RETRY; -+ st->nr_errors++; -+ if (st->nr_errors >= 3) { -+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; -+ } else { -+ handled = 1; -+ restart = 1; -+ } -+ } else if (hcint.b.stall || hcint.b.bblerr) { -+ /* A STALL implies either a LS bus error or a genuine STALL. */ -+ st->fsm = FIQ_NP_SPLIT_LS_ABORTED; -+ } else { -+ /* Hardware bug. It's possible in some cases to -+ * get a channel halt with nothing else set when -+ * the response was a NYET. Treat as local 3-strikes retry. -+ */ -+ hcint_data_t hcint_test = hcint; -+ hcint_test.b.chhltd = 0; -+ if (!hcint_test.d32) { -+ st->nr_errors++; -+ if (st->nr_errors >= 3) { -+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; -+ } else { -+ handled = 1; -+ } -+ } else { -+ /* Bail out if something unexpected happened */ -+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; -+ } -+ } -+ break; -+ -+ case FIQ_NP_OUT_CSPLIT_RETRY: -+ /* Received a CSPLIT done interrupt. -+ * Expected ACK/NAK/STALL/NYET/XFERCOMP for OUT.*/ -+ if (hcint.b.xfercomp) { -+ st->fsm = FIQ_NP_SPLIT_DONE; -+ } else if (hcint.b.nak) { -+ // The HCD will implement the holdoff on frame boundaries. -+ st->fsm = FIQ_NP_SPLIT_DONE; -+ } else if (hcint.b.nyet) { -+ // Hub still processing. -+ st->fsm = FIQ_NP_OUT_CSPLIT_RETRY; -+ handled = 1; -+ st->nr_errors = 0; -+ //restart = 1; -+ } else if (hcint.b.xacterr) { -+ /* HS error. retry immediate */ -+ st->fsm = FIQ_NP_OUT_CSPLIT_RETRY; -+ st->nr_errors++; -+ if (st->nr_errors >= 3) { -+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; -+ } else { -+ handled = 1; -+ restart = 1; -+ } -+ } else if (hcint.b.stall) { -+ /* LS bus error or genuine stall */ -+ st->fsm = FIQ_NP_SPLIT_LS_ABORTED; -+ } else { -+ /* -+ * Hardware bug. It's possible in some cases to get a -+ * channel halt with nothing else set when the response was a NYET. -+ * Treat as local 3-strikes retry. -+ */ -+ hcint_data_t hcint_test = hcint; -+ hcint_test.b.chhltd = 0; -+ if (!hcint_test.d32) { -+ st->nr_errors++; -+ if (st->nr_errors >= 3) { -+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; -+ } else { -+ handled = 1; -+ } -+ } else { -+ // Something unexpected happened. AHBerror or babble perhaps. Let the IRQ deal with it. -+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; -+ } -+ } -+ break; -+ -+ /* Periodic split states (except isoc out) */ -+ case FIQ_PER_SSPLIT_STARTED: -+ /* Expect an ACK or failure for SSPLIT */ -+ if (hcint.b.ack) { -+ /* -+ * SSPLIT transfer complete interrupt - the generation of this interrupt is fraught with bugs. -+ * For a packet queued in microframe n-3 to appear in n-2, if the channel is enabled near the EOF1 -+ * point for microframe n-3, the packet will not appear on the bus until microframe n. -+ * Additionally, the generation of the actual interrupt is dodgy. For a packet appearing on the bus -+ * in microframe n, sometimes the interrupt is generated immediately. Sometimes, it appears in n+1 -+ * coincident with SOF for n+1. -+ * SOF is also buggy. It can sometimes be raised AFTER the first bus transaction has taken place. -+ * These appear to be caused by timing/clock crossing bugs within the core itself. -+ * State machine workaround. -+ */ -+ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); -+ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); -+ fiq_fsm_setup_csplit(state, n); -+ /* Poke the oddfrm bit. If we are equivalent, we received the interrupt at the correct -+ * time. If not, then we're in the next SOF. -+ */ -+ if ((hfnum.b.frnum & 0x1) == hcchar.b.oddfrm) { -+ fiq_print(FIQDBG_INT, state, "CSWAIT %01d", n); -+ st->expected_uframe = hfnum.b.frnum; -+ st->fsm = FIQ_PER_CSPLIT_WAIT; -+ } else { -+ fiq_print(FIQDBG_INT, state, "CSPOL %01d", n); -+ /* For isochronous IN endpoints, -+ * we need to hold off if we are expecting a lot of data */ -+ if (st->hcchar_copy.b.mps < DATA0_PID_HEURISTIC) { -+ start_next_periodic = 1; -+ } -+ /* Danger will robinson: we are in a broken state. If our first interrupt after -+ * this is a NYET, it will be delayed by 1 uframe and result in an unrecoverable -+ * lag. Unmask the NYET interrupt. -+ */ -+ st->expected_uframe = (hfnum.b.frnum + 1) & 0x3FFF; -+ st->fsm = FIQ_PER_CSPLIT_BROKEN_NYET1; -+ restart = 1; -+ } -+ handled = 1; -+ } else if (hcint.b.xacterr) { -+ /* 3-strikes retry is enabled, we have hit our max nr_errors */ -+ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; -+ start_next_periodic = 1; -+ } else { -+ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; -+ start_next_periodic = 1; -+ } -+ /* We can now queue the next isochronous OUT transaction, if one is pending. */ -+ if(fiq_fsm_tt_next_isoc(state, num_channels, n)) { -+ fiq_print(FIQDBG_INT, state, "NEXTISO "); -+ } -+ break; -+ -+ case FIQ_PER_CSPLIT_NYET1: -+ /* First CSPLIT attempt was a NYET. If we get a subsequent NYET, -+ * we are too late and the TT has dropped its CSPLIT fifo. -+ */ -+ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); -+ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); -+ start_next_periodic = 1; -+ if (hcint.b.nak) { -+ st->fsm = FIQ_PER_SPLIT_DONE; -+ } else if (hcint.b.xfercomp) { -+ fiq_increment_dma_buf(state, num_channels, n); -+ st->fsm = FIQ_PER_CSPLIT_POLL; -+ st->nr_errors = 0; -+ if (fiq_fsm_more_csplits(state, n, &last_csplit)) { -+ handled = 1; -+ restart = 1; -+ if (!last_csplit) -+ start_next_periodic = 0; -+ } else { -+ st->fsm = FIQ_PER_SPLIT_DONE; -+ } -+ } else if (hcint.b.nyet) { -+ /* Doh. Data lost. */ -+ st->fsm = FIQ_PER_SPLIT_NYET_ABORTED; -+ } else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) { -+ st->fsm = FIQ_PER_SPLIT_LS_ABORTED; -+ } else { -+ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; -+ } -+ break; -+ -+ case FIQ_PER_CSPLIT_BROKEN_NYET1: -+ /* -+ * we got here because our host channel is in the delayed-interrupt -+ * state and we cannot take a NYET interrupt any later than when it -+ * occurred. Disable then re-enable the channel if this happens to force -+ * CSPLITs to occur at the right time. -+ */ -+ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); -+ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); -+ fiq_print(FIQDBG_INT, state, "BROK: %01d ", n); -+ if (hcint.b.nak) { -+ st->fsm = FIQ_PER_SPLIT_DONE; -+ start_next_periodic = 1; -+ } else if (hcint.b.xfercomp) { -+ fiq_increment_dma_buf(state, num_channels, n); -+ if (fiq_fsm_more_csplits(state, n, &last_csplit)) { -+ st->fsm = FIQ_PER_CSPLIT_POLL; -+ handled = 1; -+ restart = 1; -+ start_next_periodic = 1; -+ /* Reload HCTSIZ for the next transfer */ -+ fiq_fsm_reload_hctsiz(state, n); -+ if (!last_csplit) -+ start_next_periodic = 0; -+ } else { -+ st->fsm = FIQ_PER_SPLIT_DONE; -+ } -+ } else if (hcint.b.nyet) { -+ st->fsm = FIQ_PER_SPLIT_NYET_ABORTED; -+ start_next_periodic = 1; -+ } else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) { -+ /* Local 3-strikes retry is handled by the core. This is a ERR response.*/ -+ st->fsm = FIQ_PER_SPLIT_LS_ABORTED; -+ } else { -+ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; -+ } -+ break; -+ -+ case FIQ_PER_CSPLIT_POLL: -+ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); -+ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); -+ start_next_periodic = 1; -+ if (hcint.b.nak) { -+ st->fsm = FIQ_PER_SPLIT_DONE; -+ } else if (hcint.b.xfercomp) { -+ fiq_increment_dma_buf(state, num_channels, n); -+ if (fiq_fsm_more_csplits(state, n, &last_csplit)) { -+ handled = 1; -+ restart = 1; -+ /* Reload HCTSIZ for the next transfer */ -+ fiq_fsm_reload_hctsiz(state, n); -+ if (!last_csplit) -+ start_next_periodic = 0; -+ } else { -+ st->fsm = FIQ_PER_SPLIT_DONE; -+ } -+ } else if (hcint.b.nyet) { -+ /* Are we a NYET after the first data packet? */ -+ if (st->nrpackets == 0) { -+ st->fsm = FIQ_PER_CSPLIT_NYET1; -+ handled = 1; -+ restart = 1; -+ } else { -+ /* We got a NYET when polling CSPLITs. Can happen -+ * if our heuristic fails, or if someone disables us -+ * for any significant length of time. -+ */ -+ if (st->nr_errors >= 3) { -+ st->fsm = FIQ_PER_SPLIT_NYET_ABORTED; -+ } else { -+ st->fsm = FIQ_PER_SPLIT_DONE; -+ } -+ } -+ } else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) { -+ /* For xacterr, Local 3-strikes retry is handled by the core. This is a ERR response.*/ -+ st->fsm = FIQ_PER_SPLIT_LS_ABORTED; -+ } else { -+ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; -+ } -+ break; -+ -+ case FIQ_HS_ISOC_TURBO: -+ if (fiq_fsm_update_hs_isoc(state, n, hcint)) { -+ /* more transactions to come */ -+ handled = 1; -+ fiq_print(FIQDBG_INT, state, "HSISO M "); -+ /* For strided transfers, put ourselves to sleep */ -+ if (st->hs_isoc_info.stride > 1) { -+ st->uframe_sleeps = st->hs_isoc_info.stride - 1; -+ st->fsm = FIQ_HS_ISOC_SLEEPING; -+ } else { -+ restart = 1; -+ } -+ } else { -+ st->fsm = FIQ_HS_ISOC_DONE; -+ fiq_print(FIQDBG_INT, state, "HSISO F "); -+ } -+ break; -+ -+ case FIQ_HS_ISOC_ABORTED: -+ /* This abort is called by the driver rewriting the state mid-transaction -+ * which allows the dequeue mechanism to work more effectively. -+ */ -+ break; -+ -+ case FIQ_PER_ISO_OUT_ACTIVE: -+ if (hcint.b.ack) { -+ if(fiq_iso_out_advance(state, num_channels, n)) { -+ /* last OUT transfer */ -+ st->fsm = FIQ_PER_ISO_OUT_LAST; -+ /* -+ * Assuming the periodic FIFO in the dwc core -+ * actually does its job properly, we can queue -+ * the next ssplit now and in theory, the wire -+ * transactions will be in-order. -+ */ -+ // No it doesn't. It appears to process requests in host channel order. -+ //start_next_periodic = 1; -+ } -+ handled = 1; -+ restart = 1; -+ } else { -+ /* -+ * Isochronous transactions carry on regardless. Log the error -+ * and continue. -+ */ -+ //explode += 1; -+ st->nr_errors++; -+ if(fiq_iso_out_advance(state, num_channels, n)) { -+ st->fsm = FIQ_PER_ISO_OUT_LAST; -+ //start_next_periodic = 1; -+ } -+ handled = 1; -+ restart = 1; -+ } -+ break; -+ -+ case FIQ_PER_ISO_OUT_LAST: -+ if (hcint.b.ack) { -+ /* All done here */ -+ st->fsm = FIQ_PER_ISO_OUT_DONE; -+ } else { -+ st->fsm = FIQ_PER_ISO_OUT_DONE; -+ st->nr_errors++; -+ } -+ start_next_periodic = 1; -+ break; -+ -+ case FIQ_PER_SPLIT_TIMEOUT: -+ /* SOF kicked us because we overran. */ -+ start_next_periodic = 1; -+ break; -+ -+ default: -+ break; -+ } -+ -+ if (handled) { -+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINT, hcint.d32); -+ } else { -+ /* Copy the regs into the state so the IRQ knows what to do */ -+ st->hcint_copy.d32 = hcint.d32; -+ } -+ -+ if (restart) { -+ /* Restart always implies handled. */ -+ if (restart == 2) { -+ /* For complete-split INs, the show must go on. -+ * Force a channel restart */ -+ fiq_fsm_restart_channel(state, n, 1); -+ } else { -+ fiq_fsm_restart_channel(state, n, 0); -+ } -+ } -+ if (start_next_periodic) { -+ fiq_fsm_start_next_periodic(state, num_channels); -+ } -+ if (st->fsm != FIQ_PASSTHROUGH) -+ fiq_print(FIQDBG_INT, state, "FSMOUT%02d", st->fsm); -+ -+ return handled; -+} -+ -+ -+/** -+ * dwc_otg_fiq_fsm() - Flying State Machine (monster) FIQ -+ * @state: pointer to state struct passed from the banked FIQ mode registers. -+ * @num_channels: set according to the DWC hardware configuration -+ * @dma: pointer to DMA bounce buffers for split transaction slots -+ * -+ * The FSM FIQ performs the low-level tasks that normally would be performed by the microcode -+ * inside an EHCI or similar host controller regarding split transactions. The DWC core -+ * interrupts each and every time a split transaction packet is received or sent successfully. -+ * This results in either an interrupt storm when everything is working "properly", or -+ * the interrupt latency of the system in general breaks time-sensitive periodic split -+ * transactions. Pushing the low-level, but relatively easy state machine work into the FIQ -+ * solves these problems. -+ * -+ * Return: void -+ */ -+void notrace dwc_otg_fiq_fsm(struct fiq_state *state, int num_channels) -+{ -+ gintsts_data_t gintsts, gintsts_handled; -+ gintmsk_data_t gintmsk; -+ //hfnum_data_t hfnum; -+ haint_data_t haint, haint_handled; -+ haintmsk_data_t haintmsk; -+ int kick_irq = 0; -+ -+ gintsts_handled.d32 = 0; -+ haint_handled.d32 = 0; -+ -+ fiq_fsm_spin_lock(&state->lock); -+ gintsts.d32 = FIQ_READ(state->dwc_regs_base + GINTSTS); -+ gintmsk.d32 = FIQ_READ(state->dwc_regs_base + GINTMSK); -+ gintsts.d32 &= gintmsk.d32; -+ -+ if (gintsts.b.sofintr) { -+ /* For FSM mode, SOF is required to keep the state machine advance for -+ * certain stages of the periodic pipeline. It's death to mask this -+ * interrupt in that case. -+ */ -+ -+ if (!fiq_fsm_do_sof(state, num_channels)) { -+ /* Kick IRQ once. Queue advancement means that all pending transactions -+ * will get serviced when the IRQ finally executes. -+ */ -+ if (state->gintmsk_saved.b.sofintr == 1) -+ kick_irq |= 1; -+ state->gintmsk_saved.b.sofintr = 0; -+ } -+ gintsts_handled.b.sofintr = 1; -+ } -+ -+ if (gintsts.b.hcintr) { -+ int i; -+ haint.d32 = FIQ_READ(state->dwc_regs_base + HAINT); -+ haintmsk.d32 = FIQ_READ(state->dwc_regs_base + HAINTMSK); -+ haint.d32 &= haintmsk.d32; -+ haint_handled.d32 = 0; -+ for (i=0; ihaintmsk_saved.b2.chint &= ~(1 << i); -+ } else { -+ /* do_hcintr cleaned up after itself, but clear haint */ -+ haint_handled.b2.chint |= (1 << i); -+ } -+ } -+ } -+ -+ if (haint_handled.b2.chint) { -+ FIQ_WRITE(state->dwc_regs_base + HAINT, haint_handled.d32); -+ } -+ -+ if (haintmsk.d32 != (haintmsk.d32 & state->haintmsk_saved.d32)) { -+ /* -+ * This is necessary to avoid multiple retriggers of the MPHI in the case -+ * where interrupts are held off and HCINTs start to pile up. -+ * Only wake up the IRQ if a new interrupt came in, was not handled and was -+ * masked. -+ */ -+ haintmsk.d32 &= state->haintmsk_saved.d32; -+ FIQ_WRITE(state->dwc_regs_base + HAINTMSK, haintmsk.d32); -+ kick_irq |= 1; -+ } -+ /* Top-Level interrupt - always handled because it's level-sensitive */ -+ gintsts_handled.b.hcintr = 1; -+ } -+ -+ -+ /* Clear the bits in the saved register that were not handled but were triggered. */ -+ state->gintmsk_saved.d32 &= ~(gintsts.d32 & ~gintsts_handled.d32); -+ -+ /* FIQ didn't handle something - mask has changed - write new mask */ -+ if (gintmsk.d32 != (gintmsk.d32 & state->gintmsk_saved.d32)) { -+ gintmsk.d32 &= state->gintmsk_saved.d32; -+ gintmsk.b.sofintr = 1; -+ FIQ_WRITE(state->dwc_regs_base + GINTMSK, gintmsk.d32); -+// fiq_print(FIQDBG_INT, state, "KICKGINT"); -+// fiq_print(FIQDBG_INT, state, "%08x", gintmsk.d32); -+// fiq_print(FIQDBG_INT, state, "%08x", state->gintmsk_saved.d32); -+ kick_irq |= 1; -+ } -+ -+ if (gintsts_handled.d32) { -+ /* Only applies to edge-sensitive bits in GINTSTS */ -+ FIQ_WRITE(state->dwc_regs_base + GINTSTS, gintsts_handled.d32); -+ } -+ -+ /* We got an interrupt, didn't handle it. */ -+ if (kick_irq) { -+ state->mphi_int_count++; -+ FIQ_WRITE(state->mphi_regs.outdda, (int) state->dummy_send); -+ FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); -+ -+ } -+ state->fiq_done++; -+ mb(); -+ fiq_fsm_spin_unlock(&state->lock); -+} -+ -+ -+/** -+ * dwc_otg_fiq_nop() - FIQ "lite" -+ * @state: pointer to state struct passed from the banked FIQ mode registers. -+ * -+ * The "nop" handler does not intervene on any interrupts other than SOF. -+ * It is limited in scope to deciding at each SOF if the IRQ SOF handler (which deals -+ * with non-periodic/periodic queues) needs to be kicked. -+ * -+ * This is done to hold off the SOF interrupt, which occurs at a rate of 8000 per second. -+ * -+ * Return: void -+ */ -+void notrace dwc_otg_fiq_nop(struct fiq_state *state) -+{ -+ gintsts_data_t gintsts, gintsts_handled; -+ gintmsk_data_t gintmsk; -+ hfnum_data_t hfnum; -+ -+ fiq_fsm_spin_lock(&state->lock); -+ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); -+ gintsts.d32 = FIQ_READ(state->dwc_regs_base + GINTSTS); -+ gintmsk.d32 = FIQ_READ(state->dwc_regs_base + GINTMSK); -+ gintsts.d32 &= gintmsk.d32; -+ gintsts_handled.d32 = 0; -+ -+ if (gintsts.b.sofintr) { -+ if (!state->kick_np_queues && -+ dwc_frame_num_gt(state->next_sched_frame, hfnum.b.frnum)) { -+ /* SOF handled, no work to do, just ACK interrupt */ -+ gintsts_handled.b.sofintr = 1; -+ } else { -+ /* Kick IRQ */ -+ state->gintmsk_saved.b.sofintr = 0; -+ } -+ } -+ -+ /* Reset handled interrupts */ -+ if(gintsts_handled.d32) { -+ FIQ_WRITE(state->dwc_regs_base + GINTSTS, gintsts_handled.d32); -+ } -+ -+ /* Clear the bits in the saved register that were not handled but were triggered. */ -+ state->gintmsk_saved.d32 &= ~(gintsts.d32 & ~gintsts_handled.d32); -+ -+ /* We got an interrupt, didn't handle it and want to mask it */ -+ if (~(state->gintmsk_saved.d32)) { -+ state->mphi_int_count++; -+ gintmsk.d32 &= state->gintmsk_saved.d32; -+ FIQ_WRITE(state->dwc_regs_base + GINTMSK, gintmsk.d32); -+ /* Force a clear before another dummy send */ -+ FIQ_WRITE(state->mphi_regs.intstat, (1<<29)); -+ FIQ_WRITE(state->mphi_regs.outdda, (int) state->dummy_send); -+ FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); -+ -+ } -+ state->fiq_done++; -+ mb(); -+ fiq_fsm_spin_unlock(&state->lock); -+} ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h -@@ -0,0 +1,370 @@ -+/* -+ * dwc_otg_fiq_fsm.h - Finite state machine FIQ header definitions -+ * -+ * Copyright (c) 2013 Raspberry Pi Foundation -+ * -+ * Author: Jonathan Bell -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions are met: -+ * * Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * * Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * * Neither the name of Raspberry Pi nor the -+ * names of its contributors may be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+ * DISCLAIMED. IN NO EVENT SHALL BE LIABLE FOR ANY -+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * This FIQ implements functionality that performs split transactions on -+ * the dwc_otg hardware without any outside intervention. A split transaction -+ * is "queued" by nominating a specific host channel to perform the entirety -+ * of a split transaction. This FIQ will then perform the microframe-precise -+ * scheduling required in each phase of the transaction until completion. -+ * -+ * The FIQ functionality has been surgically implanted into the Synopsys -+ * vendor-provided driver. -+ * -+ */ -+ -+#ifndef DWC_OTG_FIQ_FSM_H_ -+#define DWC_OTG_FIQ_FSM_H_ -+ -+#include "dwc_otg_regs.h" -+#include "dwc_otg_cil.h" -+#include "dwc_otg_hcd.h" -+#include -+#include -+#include -+#include -+ -+#if 0 -+#define FLAME_ON(x) \ -+do { \ -+ int gpioreg; \ -+ \ -+ gpioreg = readl(__io_address(0x20200000+0x8)); \ -+ gpioreg &= ~(7 << (x-20)*3); \ -+ gpioreg |= 0x1 << (x-20)*3; \ -+ writel(gpioreg, __io_address(0x20200000+0x8)); \ -+ \ -+ writel(1< 1, SOF wakes up the isochronous FSM */ -+ FIQ_HS_ISOC_SLEEPING = 24, -+ FIQ_HS_ISOC_DONE = 25, -+ FIQ_HS_ISOC_ABORTED = 26, -+ FIQ_DEQUEUE_ISSUED = 30, -+ FIQ_TEST = 32, -+}; -+ -+struct fiq_stack { -+ int magic1; -+ uint8_t stack[2048]; -+ int magic2; -+}; -+ -+ -+/** -+ * struct fiq_dma_info - DMA bounce buffer utilisation information (per-channel) -+ * @index: Number of slots reported used for IN transactions / number of slots -+ * transmitted for an OUT transaction -+ * @slot_len[6]: Number of actual transfer bytes in each slot (255 if unused) -+ * -+ * Split transaction transfers can have variable length depending on other bus -+ * traffic. The OTG core DMA engine requires 4-byte aligned addresses therefore -+ * each transaction needs a guaranteed aligned address. A maximum of 6 split transfers -+ * can happen per-frame. -+ */ -+struct fiq_dma_info { -+ u8 index; -+ u8 slot_len[6]; -+}; -+ -+struct __attribute__((packed)) fiq_split_dma_slot { -+ u8 buf[188]; -+}; -+ -+struct fiq_dma_channel { -+ struct __attribute__((packed)) fiq_split_dma_slot index[6]; -+}; -+ -+struct fiq_dma_blob { -+ struct __attribute__((packed)) fiq_dma_channel channel[0]; -+}; -+ -+/** -+ * struct fiq_hs_isoc_info - USB2.0 isochronous data -+ * @iso_frame: Pointer to the array of OTG URB iso_frame_descs. -+ * @nrframes: Total length of iso_frame_desc array -+ * @index: Current index (FIQ-maintained) -+ * @stride: Interval in uframes between HS isoc transactions -+ */ -+struct fiq_hs_isoc_info { -+ struct dwc_otg_hcd_iso_packet_desc *iso_desc; -+ unsigned int nrframes; -+ unsigned int index; -+ unsigned int stride; -+}; -+ -+/** -+ * struct fiq_channel_state - FIQ state machine storage -+ * @fsm: Current state of the channel as understood by the FIQ -+ * @nr_errors: Number of transaction errors on this split-transaction -+ * @hub_addr: SSPLIT/CSPLIT destination hub -+ * @port_addr: SSPLIT/CSPLIT destination port - always 1 if single TT hub -+ * @nrpackets: For isoc OUT, the number of split-OUT packets to transmit. For -+ * split-IN, number of CSPLIT data packets that were received. -+ * @hcchar_copy: -+ * @hcsplt_copy: -+ * @hcintmsk_copy: -+ * @hctsiz_copy: Copies of the host channel registers. -+ * For use as scratch, or for returning state. -+ * -+ * The fiq_channel_state is state storage between interrupts for a host channel. The -+ * FSM state is stored here. Members of this structure must only be set up by the -+ * driver prior to enabling the FIQ for this host channel, and not touched until the FIQ -+ * has updated the state to either a COMPLETE state group or ABORT state group. -+ */ -+ -+struct fiq_channel_state { -+ enum fiq_fsm_state fsm; -+ unsigned int nr_errors; -+ unsigned int hub_addr; -+ unsigned int port_addr; -+ /* Hardware bug workaround: sometimes channel halt interrupts are -+ * delayed until the next SOF. Keep track of when we expected to get interrupted. */ -+ unsigned int expected_uframe; -+ /* number of uframes remaining (for interval > 1 HS isoc transfers) before next transfer */ -+ unsigned int uframe_sleeps; -+ /* in/out for communicating number of dma buffers used, or number of ISOC to do */ -+ unsigned int nrpackets; -+ struct fiq_dma_info dma_info; -+ struct fiq_hs_isoc_info hs_isoc_info; -+ /* Copies of HC registers - in/out communication from/to IRQ handler -+ * and for ease of channel setup. A bit of mungeing is performed - for -+ * example the hctsiz.b.maxp is _always_ the max packet size of the endpoint. -+ */ -+ hcchar_data_t hcchar_copy; -+ hcsplt_data_t hcsplt_copy; -+ hcint_data_t hcint_copy; -+ hcintmsk_data_t hcintmsk_copy; -+ hctsiz_data_t hctsiz_copy; -+ hcdma_data_t hcdma_copy; -+}; -+ -+/** -+ * struct fiq_state - top-level FIQ state machine storage -+ * @mphi_regs: virtual address of the MPHI peripheral register file -+ * @dwc_regs_base: virtual address of the base of the DWC core register file -+ * @dma_base: physical address for the base of the DMA bounce buffers -+ * @dummy_send: Scratch area for sending a fake message to the MPHI peripheral -+ * @gintmsk_saved: Top-level mask of interrupts that the FIQ has not handled. -+ * Used for determining which interrupts fired to set off the IRQ handler. -+ * @haintmsk_saved: Mask of interrupts from host channels that the FIQ did not handle internally. -+ * @np_count: Non-periodic transactions in the active queue -+ * @np_sent: Count of non-periodic transactions that have completed -+ * @next_sched_frame: For periodic transactions handled by the driver's SOF-driven queuing mechanism, -+ * this is the next frame on which a SOF interrupt is required. Used to hold off -+ * passing SOF through to the driver until necessary. -+ * @channel[n]: Per-channel FIQ state. Allocated during init depending on the number of host -+ * channels configured into the core logic. -+ * -+ * This is passed as the first argument to the dwc_otg_fiq_fsm top-level FIQ handler from the asm stub. -+ * It contains top-level state information. -+ */ -+struct fiq_state { -+ fiq_lock_t lock; -+ mphi_regs_t mphi_regs; -+ void *dwc_regs_base; -+ dma_addr_t dma_base; -+ struct fiq_dma_blob *fiq_dmab; -+ void *dummy_send; -+ gintmsk_data_t gintmsk_saved; -+ haintmsk_data_t haintmsk_saved; -+ int mphi_int_count; -+ unsigned int fiq_done; -+ unsigned int kick_np_queues; -+ unsigned int next_sched_frame; -+#ifdef FIQ_DEBUG -+ char * buffer; -+ unsigned int bufsiz; -+#endif -+ struct fiq_channel_state channel[0]; -+}; -+ -+extern void fiq_fsm_spin_lock(fiq_lock_t *lock); -+ -+extern void fiq_fsm_spin_unlock(fiq_lock_t *lock); -+ -+extern int fiq_fsm_too_late(struct fiq_state *st, int n); -+ -+extern int fiq_fsm_tt_in_use(struct fiq_state *st, int num_channels, int n); -+ -+extern void dwc_otg_fiq_fsm(struct fiq_state *state, int num_channels); -+ -+extern void dwc_otg_fiq_nop(struct fiq_state *state); -+ -+#endif /* DWC_OTG_FIQ_FSM_H_ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S -@@ -0,0 +1,80 @@ -+/* -+ * dwc_otg_fiq_fsm.S - assembly stub for the FSM FIQ -+ * -+ * Copyright (c) 2013 Raspberry Pi Foundation -+ * -+ * Author: Jonathan Bell -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions are met: -+ * * Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * * Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * * Neither the name of Raspberry Pi nor the -+ * names of its contributors may be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+ * DISCLAIMED. IN NO EVENT SHALL BE LIABLE FOR ANY -+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+ -+#include -+#include -+ -+ -+.text -+ -+.global _dwc_otg_fiq_stub_end; -+ -+/** -+ * _dwc_otg_fiq_stub() - entry copied to the FIQ vector page to allow -+ * a C-style function call with arguments from the FIQ banked registers. -+ * r0 = &hcd->fiq_state -+ * r1 = &hcd->num_channels -+ * r2 = &hcd->dma_buffers -+ * Tramples: r0, r1, r2, r4, fp, ip -+ */ -+ -+ENTRY(_dwc_otg_fiq_stub) -+ /* Stash unbanked regs - SP will have been set up for us */ -+ mov ip, sp; -+ stmdb sp!, {r0-r12, lr}; -+#ifdef FIQ_DEBUG -+ // Cycle profiling - read cycle counter at start -+ mrc p15, 0, r5, c15, c12, 1; -+#endif -+ /* r11 = fp, don't trample it */ -+ mov r4, fp; -+ /* set EABI frame size */ -+ sub fp, ip, #512; -+ -+ /* for fiq NOP mode - just need state */ -+ mov r0, r8; -+ /* r9 = num_channels */ -+ mov r1, r9; -+ /* r10 = struct *dma_bufs */ -+// mov r2, r10; -+ -+ /* r4 = &fiq_c_function */ -+ blx r4; -+#ifdef FIQ_DEBUG -+ mrc p15, 0, r4, c15, c12, 1; -+ subs r5, r5, r4; -+ // r5 is now the cycle count time for executing the FIQ. Store it somewhere? -+#endif -+ ldmia sp!, {r0-r12, lr}; -+ subs pc, lr, #4; -+_dwc_otg_fiq_stub_end: -+END(_dwc_otg_fiq_stub) ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -@@ -0,0 +1,4260 @@ -+ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $ -+ * $Revision: #104 $ -+ * $Date: 2011/10/24 $ -+ * $Change: 1871159 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_DEVICE_ONLY -+ -+/** @file -+ * This file implements HCD Core. All code in this file is portable and doesn't -+ * use any OS specific functions. -+ * Interface provided by HCD Core is defined in -+ * header file. -+ */ -+ -+#include -+#include -+ -+#include "dwc_otg_hcd.h" -+#include "dwc_otg_regs.h" -+#include "dwc_otg_fiq_fsm.h" -+ -+extern bool microframe_schedule; -+extern uint16_t fiq_fsm_mask, nak_holdoff; -+ -+//#define DEBUG_HOST_CHANNELS -+#ifdef DEBUG_HOST_CHANNELS -+static int last_sel_trans_num_per_scheduled = 0; -+static int last_sel_trans_num_nonper_scheduled = 0; -+static int last_sel_trans_num_avail_hc_at_start = 0; -+static int last_sel_trans_num_avail_hc_at_end = 0; -+#endif /* DEBUG_HOST_CHANNELS */ -+ -+ -+dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void) -+{ -+ return DWC_ALLOC(sizeof(dwc_otg_hcd_t)); -+} -+ -+/** -+ * Connection timeout function. An OTG host is required to display a -+ * message if the device does not connect within 10 seconds. -+ */ -+void dwc_otg_hcd_connect_timeout(void *ptr) -+{ -+ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, ptr); -+ DWC_PRINTF("Connect Timeout\n"); -+ __DWC_ERROR("Device Not Connected/Responding\n"); -+} -+ -+#if defined(DEBUG) -+static void dump_channel_info(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ if (qh->channel != NULL) { -+ dwc_hc_t *hc = qh->channel; -+ dwc_list_link_t *item; -+ dwc_otg_qh_t *qh_item; -+ int num_channels = hcd->core_if->core_params->host_channels; -+ int i; -+ -+ dwc_otg_hc_regs_t *hc_regs; -+ hcchar_data_t hcchar; -+ hcsplt_data_t hcsplt; -+ hctsiz_data_t hctsiz; -+ uint32_t hcdma; -+ -+ hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); -+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); -+ hcdma = DWC_READ_REG32(&hc_regs->hcdma); -+ -+ DWC_PRINTF(" Assigned to channel %p:\n", hc); -+ DWC_PRINTF(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, -+ hcsplt.d32); -+ DWC_PRINTF(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, -+ hcdma); -+ DWC_PRINTF(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", -+ hc->dev_addr, hc->ep_num, hc->ep_is_in); -+ DWC_PRINTF(" ep_type: %d\n", hc->ep_type); -+ DWC_PRINTF(" max_packet: %d\n", hc->max_packet); -+ DWC_PRINTF(" data_pid_start: %d\n", hc->data_pid_start); -+ DWC_PRINTF(" xfer_started: %d\n", hc->xfer_started); -+ DWC_PRINTF(" halt_status: %d\n", hc->halt_status); -+ DWC_PRINTF(" xfer_buff: %p\n", hc->xfer_buff); -+ DWC_PRINTF(" xfer_len: %d\n", hc->xfer_len); -+ DWC_PRINTF(" qh: %p\n", hc->qh); -+ DWC_PRINTF(" NP inactive sched:\n"); -+ DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_inactive) { -+ qh_item = -+ DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); -+ DWC_PRINTF(" %p\n", qh_item); -+ } -+ DWC_PRINTF(" NP active sched:\n"); -+ DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_active) { -+ qh_item = -+ DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); -+ DWC_PRINTF(" %p\n", qh_item); -+ } -+ DWC_PRINTF(" Channels: \n"); -+ for (i = 0; i < num_channels; i++) { -+ dwc_hc_t *hc = hcd->hc_ptr_array[i]; -+ DWC_PRINTF(" %2d: %p\n", i, hc); -+ } -+ } -+} -+#else -+#define dump_channel_info(hcd, qh) -+#endif /* DEBUG */ -+ -+/** -+ * Work queue function for starting the HCD when A-Cable is connected. -+ * The hcd_start() must be called in a process context. -+ */ -+static void hcd_start_func(void *_vp) -+{ -+ dwc_otg_hcd_t *hcd = (dwc_otg_hcd_t *) _vp; -+ -+ DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, hcd); -+ if (hcd) { -+ hcd->fops->start(hcd); -+ } -+} -+ -+static void del_xfer_timers(dwc_otg_hcd_t * hcd) -+{ -+#ifdef DEBUG -+ int i; -+ int num_channels = hcd->core_if->core_params->host_channels; -+ for (i = 0; i < num_channels; i++) { -+ DWC_TIMER_CANCEL(hcd->core_if->hc_xfer_timer[i]); -+ } -+#endif -+} -+ -+static void del_timers(dwc_otg_hcd_t * hcd) -+{ -+ del_xfer_timers(hcd); -+ DWC_TIMER_CANCEL(hcd->conn_timer); -+} -+ -+/** -+ * Processes all the URBs in a single list of QHs. Completes them with -+ * -ESHUTDOWN and frees the QTD. -+ */ -+static void kill_urbs_in_qh_list(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list) -+{ -+ dwc_list_link_t *qh_item, *qh_tmp; -+ dwc_otg_qh_t *qh; -+ dwc_otg_qtd_t *qtd, *qtd_tmp; -+ -+ DWC_LIST_FOREACH_SAFE(qh_item, qh_tmp, qh_list) { -+ qh = DWC_LIST_ENTRY(qh_item, dwc_otg_qh_t, qh_list_entry); -+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, -+ &qh->qtd_list, qtd_list_entry) { -+ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); -+ if (qtd->urb != NULL) { -+ hcd->fops->complete(hcd, qtd->urb->priv, -+ qtd->urb, -DWC_E_SHUTDOWN); -+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); -+ } -+ -+ } -+ if(qh->channel) { -+ /* Using hcchar.chen == 1 is not a reliable test. -+ * It is possible that the channel has already halted -+ * but not yet been through the IRQ handler. -+ */ -+ dwc_otg_hc_halt(hcd->core_if, qh->channel, -+ DWC_OTG_HC_XFER_URB_DEQUEUE); -+ if(microframe_schedule) -+ hcd->available_host_channels++; -+ qh->channel = NULL; -+ } -+ dwc_otg_hcd_qh_remove(hcd, qh); -+ } -+} -+ -+/** -+ * Responds with an error status of ESHUTDOWN to all URBs in the non-periodic -+ * and periodic schedules. The QTD associated with each URB is removed from -+ * the schedule and freed. This function may be called when a disconnect is -+ * detected or when the HCD is being stopped. -+ */ -+static void kill_all_urbs(dwc_otg_hcd_t * hcd) -+{ -+ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive); -+ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active); -+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive); -+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready); -+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned); -+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued); -+} -+ -+/** -+ * Start the connection timer. An OTG host is required to display a -+ * message if the device does not connect within 10 seconds. The -+ * timer is deleted if a port connect interrupt occurs before the -+ * timer expires. -+ */ -+static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t * hcd) -+{ -+ DWC_TIMER_SCHEDULE(hcd->conn_timer, 10000 /* 10 secs */ ); -+} -+ -+/** -+ * HCD Callback function for disconnect of the HCD. -+ * -+ * @param p void pointer to the struct usb_hcd -+ */ -+static int32_t dwc_otg_hcd_session_start_cb(void *p) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd; -+ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); -+ dwc_otg_hcd = p; -+ dwc_otg_hcd_start_connect_timer(dwc_otg_hcd); -+ return 1; -+} -+ -+/** -+ * HCD Callback function for starting the HCD when A-Cable is -+ * connected. -+ * -+ * @param p void pointer to the struct usb_hcd -+ */ -+static int32_t dwc_otg_hcd_start_cb(void *p) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = p; -+ dwc_otg_core_if_t *core_if; -+ hprt0_data_t hprt0; -+ -+ core_if = dwc_otg_hcd->core_if; -+ -+ if (core_if->op_state == B_HOST) { -+ /* -+ * Reset the port. During a HNP mode switch the reset -+ * needs to occur within 1ms and have a duration of at -+ * least 50ms. -+ */ -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtrst = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ } -+ DWC_WORKQ_SCHEDULE_DELAYED(core_if->wq_otg, -+ hcd_start_func, dwc_otg_hcd, 50, -+ "start hcd"); -+ -+ return 1; -+} -+ -+/** -+ * HCD Callback function for disconnect of the HCD. -+ * -+ * @param p void pointer to the struct usb_hcd -+ */ -+static int32_t dwc_otg_hcd_disconnect_cb(void *p) -+{ -+ gintsts_data_t intr; -+ dwc_otg_hcd_t *dwc_otg_hcd = p; -+ -+ /* -+ * Set status flags for the hub driver. -+ */ -+ dwc_otg_hcd->flags.b.port_connect_status_change = 1; -+ dwc_otg_hcd->flags.b.port_connect_status = 0; -+ if(fiq_enable) -+ local_fiq_disable(); -+ /* -+ * Shutdown any transfers in process by clearing the Tx FIFO Empty -+ * interrupt mask and status bits and disabling subsequent host -+ * channel interrupts. -+ */ -+ intr.d32 = 0; -+ intr.b.nptxfempty = 1; -+ intr.b.ptxfempty = 1; -+ intr.b.hcintr = 1; -+ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, -+ intr.d32, 0); -+ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintsts, -+ intr.d32, 0); -+ -+ del_timers(dwc_otg_hcd); -+ -+ /* -+ * Turn off the vbus power only if the core has transitioned to device -+ * mode. If still in host mode, need to keep power on to detect a -+ * reconnection. -+ */ -+ if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) { -+ if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) { -+ hprt0_data_t hprt0 = {.d32 = 0 }; -+ DWC_PRINTF("Disconnect: PortPower off\n"); -+ hprt0.b.prtpwr = 0; -+ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, -+ hprt0.d32); -+ } -+ -+ dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if); -+ } -+ -+ /* Respond with an error status to all URBs in the schedule. */ -+ kill_all_urbs(dwc_otg_hcd); -+ -+ if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) { -+ /* Clean up any host channels that were in use. */ -+ int num_channels; -+ int i; -+ dwc_hc_t *channel; -+ dwc_otg_hc_regs_t *hc_regs; -+ hcchar_data_t hcchar; -+ -+ num_channels = dwc_otg_hcd->core_if->core_params->host_channels; -+ -+ if (!dwc_otg_hcd->core_if->dma_enable) { -+ /* Flush out any channel requests in slave mode. */ -+ for (i = 0; i < num_channels; i++) { -+ channel = dwc_otg_hcd->hc_ptr_array[i]; -+ if (DWC_CIRCLEQ_EMPTY_ENTRY -+ (channel, hc_list_entry)) { -+ hc_regs = -+ dwc_otg_hcd->core_if-> -+ host_if->hc_regs[i]; -+ hcchar.d32 = -+ DWC_READ_REG32(&hc_regs->hcchar); -+ if (hcchar.b.chen) { -+ hcchar.b.chen = 0; -+ hcchar.b.chdis = 1; -+ hcchar.b.epdir = 0; -+ DWC_WRITE_REG32 -+ (&hc_regs->hcchar, -+ hcchar.d32); -+ } -+ } -+ } -+ } -+ -+ for (i = 0; i < num_channels; i++) { -+ channel = dwc_otg_hcd->hc_ptr_array[i]; -+ if (DWC_CIRCLEQ_EMPTY_ENTRY(channel, hc_list_entry)) { -+ hc_regs = -+ dwc_otg_hcd->core_if->host_if->hc_regs[i]; -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ if (hcchar.b.chen) { -+ /* Halt the channel. */ -+ hcchar.b.chdis = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, -+ hcchar.d32); -+ } -+ -+ dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, -+ channel); -+ DWC_CIRCLEQ_INSERT_TAIL -+ (&dwc_otg_hcd->free_hc_list, channel, -+ hc_list_entry); -+ /* -+ * Added for Descriptor DMA to prevent channel double cleanup -+ * in release_channel_ddma(). Which called from ep_disable -+ * when device disconnect. -+ */ -+ channel->qh = NULL; -+ } -+ } -+ if(fiq_fsm_enable) { -+ for(i=0; i < 128; i++) { -+ dwc_otg_hcd->hub_port[i] = 0; -+ } -+ } -+ -+ } -+ -+ if(fiq_enable) -+ local_fiq_enable(); -+ -+ if (dwc_otg_hcd->fops->disconnect) { -+ dwc_otg_hcd->fops->disconnect(dwc_otg_hcd); -+ } -+ -+ return 1; -+} -+ -+/** -+ * HCD Callback function for stopping the HCD. -+ * -+ * @param p void pointer to the struct usb_hcd -+ */ -+static int32_t dwc_otg_hcd_stop_cb(void *p) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = p; -+ -+ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); -+ dwc_otg_hcd_stop(dwc_otg_hcd); -+ return 1; -+} -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+/** -+ * HCD Callback function for sleep of HCD. -+ * -+ * @param p void pointer to the struct usb_hcd -+ */ -+static int dwc_otg_hcd_sleep_cb(void *p) -+{ -+ dwc_otg_hcd_t *hcd = p; -+ -+ dwc_otg_hcd_free_hc_from_lpm(hcd); -+ -+ return 0; -+} -+#endif -+ -+ -+/** -+ * HCD Callback function for Remote Wakeup. -+ * -+ * @param p void pointer to the struct usb_hcd -+ */ -+static int dwc_otg_hcd_rem_wakeup_cb(void *p) -+{ -+ dwc_otg_hcd_t *hcd = p; -+ -+ if (hcd->core_if->lx_state == DWC_OTG_L2) { -+ hcd->flags.b.port_suspend_change = 1; -+ } -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ else { -+ hcd->flags.b.port_l1_change = 1; -+ } -+#endif -+ return 0; -+} -+ -+/** -+ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are -+ * stopped. -+ */ -+void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd) -+{ -+ hprt0_data_t hprt0 = {.d32 = 0 }; -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n"); -+ -+ /* -+ * The root hub should be disconnected before this function is called. -+ * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) -+ * and the QH lists (via ..._hcd_endpoint_disable). -+ */ -+ -+ /* Turn off all host-specific interrupts. */ -+ dwc_otg_disable_host_interrupts(hcd->core_if); -+ -+ /* Turn off the vbus power */ -+ DWC_PRINTF("PortPower off\n"); -+ hprt0.b.prtpwr = 0; -+ DWC_WRITE_REG32(hcd->core_if->host_if->hprt0, hprt0.d32); -+ dwc_mdelay(1); -+} -+ -+int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * hcd, -+ dwc_otg_hcd_urb_t * dwc_otg_urb, void **ep_handle, -+ int atomic_alloc) -+{ -+ int retval = 0; -+ uint8_t needs_scheduling = 0; -+ dwc_otg_transaction_type_e tr_type; -+ dwc_otg_qtd_t *qtd; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ hprt0_data_t hprt0 = { .d32 = 0 }; -+ -+#ifdef DEBUG /* integrity checks (Broadcom) */ -+ if (NULL == hcd->core_if) { -+ DWC_ERROR("**** DWC OTG HCD URB Enqueue - HCD has NULL core_if\n"); -+ /* No longer connected. */ -+ return -DWC_E_INVALID; -+ } -+#endif -+ if (!hcd->flags.b.port_connect_status) { -+ /* No longer connected. */ -+ DWC_ERROR("Not connected\n"); -+ return -DWC_E_NO_DEVICE; -+ } -+ -+ /* Some core configurations cannot support LS traffic on a FS root port */ -+ if ((hcd->fops->speed(hcd, dwc_otg_urb->priv) == USB_SPEED_LOW) && -+ (hcd->core_if->hwcfg2.b.fs_phy_type == 1) && -+ (hcd->core_if->hwcfg2.b.hs_phy_type == 1)) { -+ hprt0.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0); -+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED) { -+ return -DWC_E_NO_DEVICE; -+ } -+ } -+ -+ qtd = dwc_otg_hcd_qtd_create(dwc_otg_urb, atomic_alloc); -+ if (qtd == NULL) { -+ DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n"); -+ return -DWC_E_NO_MEMORY; -+ } -+#ifdef DEBUG /* integrity checks (Broadcom) */ -+ if (qtd->urb == NULL) { -+ DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD with no URBs\n"); -+ return -DWC_E_NO_MEMORY; -+ } -+ if (qtd->urb->priv == NULL) { -+ DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD URB with no URB handle\n"); -+ return -DWC_E_NO_MEMORY; -+ } -+#endif -+ intr_mask.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->gintmsk); -+ if(!intr_mask.b.sofintr || fiq_enable) needs_scheduling = 1; -+ if((((dwc_otg_qh_t *)ep_handle)->ep_type == UE_BULK) && !(qtd->urb->flags & URB_GIVEBACK_ASAP)) -+ /* Do not schedule SG transactions until qtd has URB_GIVEBACK_ASAP set */ -+ needs_scheduling = 0; -+ -+ retval = dwc_otg_hcd_qtd_add(qtd, hcd, (dwc_otg_qh_t **) ep_handle, atomic_alloc); -+ // creates a new queue in ep_handle if it doesn't exist already -+ if (retval < 0) { -+ DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. " -+ "Error status %d\n", retval); -+ dwc_otg_hcd_qtd_free(qtd); -+ return retval; -+ } -+ -+ if(needs_scheduling) { -+ tr_type = dwc_otg_hcd_select_transactions(hcd); -+ if (tr_type != DWC_OTG_TRANSACTION_NONE) { -+ dwc_otg_hcd_queue_transactions(hcd, tr_type); -+ } -+ } -+ return retval; -+} -+ -+int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * hcd, -+ dwc_otg_hcd_urb_t * dwc_otg_urb) -+{ -+ dwc_otg_qh_t *qh; -+ dwc_otg_qtd_t *urb_qtd; -+ BUG_ON(!hcd); -+ BUG_ON(!dwc_otg_urb); -+ -+#ifdef DEBUG /* integrity checks (Broadcom) */ -+ -+ if (hcd == NULL) { -+ DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL HCD\n"); -+ return -DWC_E_INVALID; -+ } -+ if (dwc_otg_urb == NULL) { -+ DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL URB\n"); -+ return -DWC_E_INVALID; -+ } -+ if (dwc_otg_urb->qtd == NULL) { -+ DWC_ERROR("**** DWC OTG HCD URB Dequeue with NULL QTD\n"); -+ return -DWC_E_INVALID; -+ } -+ urb_qtd = dwc_otg_urb->qtd; -+ BUG_ON(!urb_qtd); -+ if (urb_qtd->qh == NULL) { -+ DWC_ERROR("**** DWC OTG HCD URB Dequeue with QTD with NULL Q handler\n"); -+ return -DWC_E_INVALID; -+ } -+#else -+ urb_qtd = dwc_otg_urb->qtd; -+ BUG_ON(!urb_qtd); -+#endif -+ qh = urb_qtd->qh; -+ BUG_ON(!qh); -+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { -+ if (urb_qtd->in_process) { -+ dump_channel_info(hcd, qh); -+ } -+ } -+#ifdef DEBUG /* integrity checks (Broadcom) */ -+ if (hcd->core_if == NULL) { -+ DWC_ERROR("**** DWC OTG HCD URB Dequeue HCD has NULL core_if\n"); -+ return -DWC_E_INVALID; -+ } -+#endif -+ if (urb_qtd->in_process && qh->channel) { -+ /* The QTD is in process (it has been assigned to a channel). */ -+ if (hcd->flags.b.port_connect_status) { -+ int n = qh->channel->hc_num; -+ /* -+ * If still connected (i.e. in host mode), halt the -+ * channel so it can be used for other transfers. If -+ * no longer connected, the host registers can't be -+ * written to halt the channel since the core is in -+ * device mode. -+ */ -+ /* In FIQ FSM mode, we need to shut down carefully. -+ * The FIQ may attempt to restart a disabled channel */ -+ if (fiq_fsm_enable && (hcd->fiq_state->channel[n].fsm != FIQ_PASSTHROUGH)) { -+ qh->channel->halt_status = DWC_OTG_HC_XFER_URB_DEQUEUE; -+ qh->channel->halt_pending = 1; -+ hcd->fiq_state->channel[n].fsm = FIQ_DEQUEUE_ISSUED; -+ } else { -+ dwc_otg_hc_halt(hcd->core_if, qh->channel, -+ DWC_OTG_HC_XFER_URB_DEQUEUE); -+ } -+ } -+ } -+ -+ /* -+ * Free the QTD and clean up the associated QH. Leave the QH in the -+ * schedule if it has any remaining QTDs. -+ */ -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue - " -+ "delete %sQueue handler\n", -+ hcd->core_if->dma_desc_enable?"DMA ":""); -+ if (!hcd->core_if->dma_desc_enable) { -+ uint8_t b = urb_qtd->in_process; -+ dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh); -+ if (b) { -+ dwc_otg_hcd_qh_deactivate(hcd, qh, 0); -+ qh->channel = NULL; -+ } else if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { -+ dwc_otg_hcd_qh_remove(hcd, qh); -+ } -+ } else { -+ dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh); -+ } -+ return 0; -+} -+ -+int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle, -+ int retry) -+{ -+ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; -+ int retval = 0; -+ dwc_irqflags_t flags; -+ -+ if (retry < 0) { -+ retval = -DWC_E_INVALID; -+ goto done; -+ } -+ -+ if (!qh) { -+ retval = -DWC_E_INVALID; -+ goto done; -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); -+ -+ while (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list) && retry) { -+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); -+ retry--; -+ dwc_msleep(5); -+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); -+ } -+ -+ dwc_otg_hcd_qh_remove(hcd, qh); -+ -+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); -+ /* -+ * Split dwc_otg_hcd_qh_remove_and_free() into qh_remove -+ * and qh_free to prevent stack dump on DWC_DMA_FREE() with -+ * irq_disabled (spinlock_irqsave) in dwc_otg_hcd_desc_list_free() -+ * and dwc_otg_hcd_frame_list_alloc(). -+ */ -+ dwc_otg_hcd_qh_free(hcd, qh); -+ -+done: -+ return retval; -+} -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) -+int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle) -+{ -+ int retval = 0; -+ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; -+ if (!qh) -+ return -DWC_E_INVALID; -+ -+ qh->data_toggle = DWC_OTG_HC_PID_DATA0; -+ return retval; -+} -+#endif -+ -+/** -+ * HCD Callback structure for handling mode switching. -+ */ -+static dwc_otg_cil_callbacks_t hcd_cil_callbacks = { -+ .start = dwc_otg_hcd_start_cb, -+ .stop = dwc_otg_hcd_stop_cb, -+ .disconnect = dwc_otg_hcd_disconnect_cb, -+ .session_start = dwc_otg_hcd_session_start_cb, -+ .resume_wakeup = dwc_otg_hcd_rem_wakeup_cb, -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ .sleep = dwc_otg_hcd_sleep_cb, -+#endif -+ .p = 0, -+}; -+ -+/** -+ * Reset tasklet function -+ */ -+static void reset_tasklet_func(void *data) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *) data; -+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; -+ hprt0_data_t hprt0; -+ -+ DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n"); -+ -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtrst = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ dwc_mdelay(60); -+ -+ hprt0.b.prtrst = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ dwc_otg_hcd->flags.b.port_reset_change = 1; -+} -+ -+static void completion_tasklet_func(void *ptr) -+{ -+ dwc_otg_hcd_t *hcd = (dwc_otg_hcd_t *) ptr; -+ struct urb *urb; -+ urb_tq_entry_t *item; -+ dwc_irqflags_t flags; -+ -+ /* This could just be spin_lock_irq */ -+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); -+ while (!DWC_TAILQ_EMPTY(&hcd->completed_urb_list)) { -+ item = DWC_TAILQ_FIRST(&hcd->completed_urb_list); -+ urb = item->urb; -+ DWC_TAILQ_REMOVE(&hcd->completed_urb_list, item, -+ urb_tq_entries); -+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); -+ DWC_FREE(item); -+ -+ usb_hcd_giveback_urb(hcd->priv, urb, urb->status); -+ -+ -+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); -+ } -+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); -+ return; -+} -+ -+static void qh_list_free(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list) -+{ -+ dwc_list_link_t *item; -+ dwc_otg_qh_t *qh; -+ dwc_irqflags_t flags; -+ -+ if (!qh_list->next) { -+ /* The list hasn't been initialized yet. */ -+ return; -+ } -+ /* -+ * Hold spinlock here. Not needed in that case if bellow -+ * function is being called from ISR -+ */ -+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); -+ /* Ensure there are no QTDs or URBs left. */ -+ kill_urbs_in_qh_list(hcd, qh_list); -+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); -+ -+ DWC_LIST_FOREACH(item, qh_list) { -+ qh = DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); -+ dwc_otg_hcd_qh_remove_and_free(hcd, qh); -+ } -+} -+ -+/** -+ * Exit from Hibernation if Host did not detect SRP from connected SRP capable -+ * Device during SRP time by host power up. -+ */ -+void dwc_otg_hcd_power_up(void *ptr) -+{ -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; -+ -+ DWC_PRINTF("%s called\n", __FUNCTION__); -+ -+ if (!core_if->hibernation_suspend) { -+ DWC_PRINTF("Already exited from Hibernation\n"); -+ return; -+ } -+ -+ /* Switch on the voltage to the core */ -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Reset the core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Disable power clamps */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Remove reset the core signal */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable PMU interrupt */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ core_if->hibernation_suspend = 0; -+ -+ /* Disable PMU */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Enable VBUS */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.dis_vbus = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ core_if->op_state = A_HOST; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_hcd_start(core_if); -+} -+ -+void dwc_otg_cleanup_fiq_channel(dwc_otg_hcd_t *hcd, uint32_t num) -+{ -+ struct fiq_channel_state *st = &hcd->fiq_state->channel[num]; -+ struct fiq_dma_blob *blob = hcd->fiq_dmab; -+ int i; -+ -+ st->fsm = FIQ_PASSTHROUGH; -+ st->hcchar_copy.d32 = 0; -+ st->hcsplt_copy.d32 = 0; -+ st->hcint_copy.d32 = 0; -+ st->hcintmsk_copy.d32 = 0; -+ st->hctsiz_copy.d32 = 0; -+ st->hcdma_copy.d32 = 0; -+ st->nr_errors = 0; -+ st->hub_addr = 0; -+ st->port_addr = 0; -+ st->expected_uframe = 0; -+ st->nrpackets = 0; -+ st->dma_info.index = 0; -+ for (i = 0; i < 6; i++) -+ st->dma_info.slot_len[i] = 255; -+ st->hs_isoc_info.index = 0; -+ st->hs_isoc_info.iso_desc = NULL; -+ st->hs_isoc_info.nrframes = 0; -+ -+ DWC_MEMSET(&blob->channel[num].index[0], 0x6b, 1128); -+} -+ -+/** -+ * Frees secondary storage associated with the dwc_otg_hcd structure contained -+ * in the struct usb_hcd field. -+ */ -+static void dwc_otg_hcd_free(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ struct device *dev = dwc_otg_hcd_to_dev(dwc_otg_hcd); -+ int i; -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n"); -+ -+ del_timers(dwc_otg_hcd); -+ -+ /* Free memory for QH/QTD lists */ -+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive); -+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active); -+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive); -+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready); -+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned); -+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued); -+ -+ /* Free memory for the host channels. */ -+ for (i = 0; i < MAX_EPS_CHANNELS; i++) { -+ dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i]; -+ -+#ifdef DEBUG -+ if (dwc_otg_hcd->core_if->hc_xfer_timer[i]) { -+ DWC_TIMER_FREE(dwc_otg_hcd->core_if->hc_xfer_timer[i]); -+ } -+#endif -+ if (hc != NULL) { -+ DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", -+ i, hc); -+ DWC_FREE(hc); -+ } -+ } -+ -+ if (dwc_otg_hcd->core_if->dma_enable) { -+ if (dwc_otg_hcd->status_buf_dma) { -+ DWC_DMA_FREE(dev, DWC_OTG_HCD_STATUS_BUF_SIZE, -+ dwc_otg_hcd->status_buf, -+ dwc_otg_hcd->status_buf_dma); -+ } -+ } else if (dwc_otg_hcd->status_buf != NULL) { -+ DWC_FREE(dwc_otg_hcd->status_buf); -+ } -+ DWC_SPINLOCK_FREE(dwc_otg_hcd->channel_lock); -+ DWC_SPINLOCK_FREE(dwc_otg_hcd->lock); -+ /* Set core_if's lock pointer to NULL */ -+ dwc_otg_hcd->core_if->lock = NULL; -+ -+ DWC_TIMER_FREE(dwc_otg_hcd->conn_timer); -+ DWC_TASK_FREE(dwc_otg_hcd->reset_tasklet); -+ DWC_TASK_FREE(dwc_otg_hcd->completion_tasklet); -+ DWC_FREE(dwc_otg_hcd->fiq_state); -+ -+#ifdef DWC_DEV_SRPCAP -+ if (dwc_otg_hcd->core_if->power_down == 2 && -+ dwc_otg_hcd->core_if->pwron_timer) { -+ DWC_TIMER_FREE(dwc_otg_hcd->core_if->pwron_timer); -+ } -+#endif -+ DWC_FREE(dwc_otg_hcd); -+} -+ -+int init_hcd_usecs(dwc_otg_hcd_t *_hcd); -+ -+int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if) -+{ -+ struct device *dev = dwc_otg_hcd_to_dev(hcd); -+ int retval = 0; -+ int num_channels; -+ int i; -+ dwc_hc_t *channel; -+ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK)) -+ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(hcd->lock); -+ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(hcd->channel_lock); -+#else -+ hcd->lock = DWC_SPINLOCK_ALLOC(); -+ hcd->channel_lock = DWC_SPINLOCK_ALLOC(); -+#endif -+ DWC_DEBUGPL(DBG_HCDV, "init of HCD %p given core_if %p\n", -+ hcd, core_if); -+ if (!hcd->lock) { -+ DWC_ERROR("Could not allocate lock for pcd"); -+ DWC_FREE(hcd); -+ retval = -DWC_E_NO_MEMORY; -+ goto out; -+ } -+ hcd->core_if = core_if; -+ -+ /* Register the HCD CIL Callbacks */ -+ dwc_otg_cil_register_hcd_callbacks(hcd->core_if, -+ &hcd_cil_callbacks, hcd); -+ -+ /* Initialize the non-periodic schedule. */ -+ DWC_LIST_INIT(&hcd->non_periodic_sched_inactive); -+ DWC_LIST_INIT(&hcd->non_periodic_sched_active); -+ -+ /* Initialize the periodic schedule. */ -+ DWC_LIST_INIT(&hcd->periodic_sched_inactive); -+ DWC_LIST_INIT(&hcd->periodic_sched_ready); -+ DWC_LIST_INIT(&hcd->periodic_sched_assigned); -+ DWC_LIST_INIT(&hcd->periodic_sched_queued); -+ DWC_TAILQ_INIT(&hcd->completed_urb_list); -+ /* -+ * Create a host channel descriptor for each host channel implemented -+ * in the controller. Initialize the channel descriptor array. -+ */ -+ DWC_CIRCLEQ_INIT(&hcd->free_hc_list); -+ num_channels = hcd->core_if->core_params->host_channels; -+ DWC_MEMSET(hcd->hc_ptr_array, 0, sizeof(hcd->hc_ptr_array)); -+ for (i = 0; i < num_channels; i++) { -+ channel = DWC_ALLOC(sizeof(dwc_hc_t)); -+ if (channel == NULL) { -+ retval = -DWC_E_NO_MEMORY; -+ DWC_ERROR("%s: host channel allocation failed\n", -+ __func__); -+ dwc_otg_hcd_free(hcd); -+ goto out; -+ } -+ channel->hc_num = i; -+ hcd->hc_ptr_array[i] = channel; -+#ifdef DEBUG -+ hcd->core_if->hc_xfer_timer[i] = -+ DWC_TIMER_ALLOC("hc timer", hc_xfer_timeout, -+ &hcd->core_if->hc_xfer_info[i]); -+#endif -+ DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, -+ channel); -+ } -+ -+ if (fiq_enable) { -+ hcd->fiq_state = DWC_ALLOC(sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels)); -+ if (!hcd->fiq_state) { -+ retval = -DWC_E_NO_MEMORY; -+ DWC_ERROR("%s: cannot allocate fiq_state structure\n", __func__); -+ dwc_otg_hcd_free(hcd); -+ goto out; -+ } -+ DWC_MEMSET(hcd->fiq_state, 0, (sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels))); -+ -+ for (i = 0; i < num_channels; i++) { -+ hcd->fiq_state->channel[i].fsm = FIQ_PASSTHROUGH; -+ } -+ hcd->fiq_state->dummy_send = DWC_ALLOC_ATOMIC(16); -+ -+ hcd->fiq_stack = DWC_ALLOC(sizeof(struct fiq_stack)); -+ if (!hcd->fiq_stack) { -+ retval = -DWC_E_NO_MEMORY; -+ DWC_ERROR("%s: cannot allocate fiq_stack structure\n", __func__); -+ dwc_otg_hcd_free(hcd); -+ goto out; -+ } -+ hcd->fiq_stack->magic1 = 0xDEADBEEF; -+ hcd->fiq_stack->magic2 = 0xD00DFEED; -+ hcd->fiq_state->gintmsk_saved.d32 = ~0; -+ hcd->fiq_state->haintmsk_saved.b2.chint = ~0; -+ -+ /* This bit is terrible and uses no API, but necessary. The FIQ has no concept of DMA pools -+ * (and if it did, would be a lot slower). This allocates a chunk of memory (~9kiB for 8 host channels) -+ * for use as transaction bounce buffers in a 2-D array. Our access into this chunk is done by some -+ * moderately readable array casts. -+ */ -+ hcd->fiq_dmab = DWC_DMA_ALLOC(dev, (sizeof(struct fiq_dma_channel) * num_channels), &hcd->fiq_state->dma_base); -+ DWC_WARN("FIQ DMA bounce buffers: virt = 0x%08x dma = 0x%08x len=%d", -+ (unsigned int)hcd->fiq_dmab, (unsigned int)hcd->fiq_state->dma_base, -+ sizeof(struct fiq_dma_channel) * num_channels); -+ -+ DWC_MEMSET(hcd->fiq_dmab, 0x6b, 9024); -+ -+ /* pointer for debug in fiq_print */ -+ hcd->fiq_state->fiq_dmab = hcd->fiq_dmab; -+ if (fiq_fsm_enable) { -+ int i; -+ for (i=0; i < hcd->core_if->core_params->host_channels; i++) { -+ dwc_otg_cleanup_fiq_channel(hcd, i); -+ } -+ DWC_PRINTF("FIQ FSM acceleration enabled for :\n%s%s%s%s", -+ (fiq_fsm_mask & 0x1) ? "Non-periodic Split Transactions\n" : "", -+ (fiq_fsm_mask & 0x2) ? "Periodic Split Transactions\n" : "", -+ (fiq_fsm_mask & 0x4) ? "High-Speed Isochronous Endpoints\n" : "", -+ (fiq_fsm_mask & 0x8) ? "Interrupt/Control Split Transaction hack enabled\n" : ""); -+ } -+ } -+ -+ /* Initialize the Connection timeout timer. */ -+ hcd->conn_timer = DWC_TIMER_ALLOC("Connection timer", -+ dwc_otg_hcd_connect_timeout, 0); -+ -+ printk(KERN_DEBUG "dwc_otg: Microframe scheduler %s\n", microframe_schedule ? "enabled":"disabled"); -+ if (microframe_schedule) -+ init_hcd_usecs(hcd); -+ -+ /* Initialize reset tasklet. */ -+ hcd->reset_tasklet = DWC_TASK_ALLOC("reset_tasklet", reset_tasklet_func, hcd); -+ -+ hcd->completion_tasklet = DWC_TASK_ALLOC("completion_tasklet", -+ completion_tasklet_func, hcd); -+#ifdef DWC_DEV_SRPCAP -+ if (hcd->core_if->power_down == 2) { -+ /* Initialize Power on timer for Host power up in case hibernation */ -+ hcd->core_if->pwron_timer = DWC_TIMER_ALLOC("PWRON TIMER", -+ dwc_otg_hcd_power_up, core_if); -+ } -+#endif -+ -+ /* -+ * Allocate space for storing data on status transactions. Normally no -+ * data is sent, but this space acts as a bit bucket. This must be -+ * done after usb_add_hcd since that function allocates the DMA buffer -+ * pool. -+ */ -+ if (hcd->core_if->dma_enable) { -+ hcd->status_buf = -+ DWC_DMA_ALLOC(dev, DWC_OTG_HCD_STATUS_BUF_SIZE, -+ &hcd->status_buf_dma); -+ } else { -+ hcd->status_buf = DWC_ALLOC(DWC_OTG_HCD_STATUS_BUF_SIZE); -+ } -+ if (!hcd->status_buf) { -+ retval = -DWC_E_NO_MEMORY; -+ DWC_ERROR("%s: status_buf allocation failed\n", __func__); -+ dwc_otg_hcd_free(hcd); -+ goto out; -+ } -+ -+ hcd->otg_port = 1; -+ hcd->frame_list = NULL; -+ hcd->frame_list_dma = 0; -+ hcd->periodic_qh_count = 0; -+ -+ DWC_MEMSET(hcd->hub_port, 0, sizeof(hcd->hub_port)); -+#ifdef FIQ_DEBUG -+ DWC_MEMSET(hcd->hub_port_alloc, -1, sizeof(hcd->hub_port_alloc)); -+#endif -+ -+out: -+ return retval; -+} -+ -+void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd) -+{ -+ /* Turn off all host-specific interrupts. */ -+ dwc_otg_disable_host_interrupts(hcd->core_if); -+ -+ dwc_otg_hcd_free(hcd); -+} -+ -+/** -+ * Initializes dynamic portions of the DWC_otg HCD state. -+ */ -+static void dwc_otg_hcd_reinit(dwc_otg_hcd_t * hcd) -+{ -+ int num_channels; -+ int i; -+ dwc_hc_t *channel; -+ dwc_hc_t *channel_tmp; -+ -+ hcd->flags.d32 = 0; -+ -+ hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active; -+ if (!microframe_schedule) { -+ hcd->non_periodic_channels = 0; -+ hcd->periodic_channels = 0; -+ } else { -+ hcd->available_host_channels = hcd->core_if->core_params->host_channels; -+ } -+ /* -+ * Put all channels in the free channel list and clean up channel -+ * states. -+ */ -+ DWC_CIRCLEQ_FOREACH_SAFE(channel, channel_tmp, -+ &hcd->free_hc_list, hc_list_entry) { -+ DWC_CIRCLEQ_REMOVE(&hcd->free_hc_list, channel, hc_list_entry); -+ } -+ -+ num_channels = hcd->core_if->core_params->host_channels; -+ for (i = 0; i < num_channels; i++) { -+ channel = hcd->hc_ptr_array[i]; -+ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, channel, -+ hc_list_entry); -+ dwc_otg_hc_cleanup(hcd->core_if, channel); -+ } -+ -+ /* Initialize the DWC core for host mode operation. */ -+ dwc_otg_core_host_init(hcd->core_if); -+ -+ /* Set core_if's lock pointer to the hcd->lock */ -+ hcd->core_if->lock = hcd->lock; -+} -+ -+/** -+ * Assigns transactions from a QTD to a free host channel and initializes the -+ * host channel to perform the transactions. The host channel is removed from -+ * the free list. -+ * -+ * @param hcd The HCD state structure. -+ * @param qh Transactions from the first QTD for this QH are selected and -+ * assigned to a free host channel. -+ */ -+static void assign_and_init_hc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ dwc_hc_t *hc; -+ dwc_otg_qtd_t *qtd; -+ dwc_otg_hcd_urb_t *urb; -+ void* ptr = NULL; -+ uint32_t intr_enable; -+ unsigned long flags; -+ gintmsk_data_t gintmsk = { .d32 = 0, }; -+ struct device *dev = dwc_otg_hcd_to_dev(hcd); -+ -+ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); -+ -+ urb = qtd->urb; -+ -+ DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p) - urb %x, actual_length %d\n", __func__, hcd, qh, (unsigned int)urb, urb->actual_length); -+ -+ if (((urb->actual_length < 0) || (urb->actual_length > urb->length)) && !dwc_otg_hcd_is_pipe_in(&urb->pipe_info)) -+ urb->actual_length = urb->length; -+ -+ -+ hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list); -+ -+ /* Remove the host channel from the free list. */ -+ DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry); -+ -+ qh->channel = hc; -+ -+ qtd->in_process = 1; -+ -+ /* -+ * Use usb_pipedevice to determine device address. This address is -+ * 0 before the SET_ADDRESS command and the correct address afterward. -+ */ -+ hc->dev_addr = dwc_otg_hcd_get_dev_addr(&urb->pipe_info); -+ hc->ep_num = dwc_otg_hcd_get_ep_num(&urb->pipe_info); -+ hc->speed = qh->dev_speed; -+ hc->max_packet = dwc_max_packet(qh->maxp); -+ -+ hc->xfer_started = 0; -+ hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS; -+ hc->error_state = (qtd->error_count > 0); -+ hc->halt_on_queue = 0; -+ hc->halt_pending = 0; -+ hc->requests = 0; -+ -+ /* -+ * The following values may be modified in the transfer type section -+ * below. The xfer_len value may be reduced when the transfer is -+ * started to accommodate the max widths of the XferSize and PktCnt -+ * fields in the HCTSIZn register. -+ */ -+ -+ hc->ep_is_in = (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) != 0); -+ if (hc->ep_is_in) { -+ hc->do_ping = 0; -+ } else { -+ hc->do_ping = qh->ping_state; -+ } -+ -+ hc->data_pid_start = qh->data_toggle; -+ hc->multi_count = 1; -+ -+ if (hcd->core_if->dma_enable) { -+ hc->xfer_buff = (uint8_t *) urb->dma + urb->actual_length; -+ -+ /* For non-dword aligned case */ -+ if (((unsigned long)hc->xfer_buff & 0x3) -+ && !hcd->core_if->dma_desc_enable) { -+ ptr = (uint8_t *) urb->buf + urb->actual_length; -+ } -+ } else { -+ hc->xfer_buff = (uint8_t *) urb->buf + urb->actual_length; -+ } -+ hc->xfer_len = urb->length - urb->actual_length; -+ hc->xfer_count = 0; -+ -+ /* -+ * Set the split attributes -+ */ -+ hc->do_split = 0; -+ if (qh->do_split) { -+ uint32_t hub_addr, port_addr; -+ hc->do_split = 1; -+ hc->xact_pos = qtd->isoc_split_pos; -+ /* We don't need to do complete splits anymore */ -+// if(fiq_fsm_enable) -+ if (0) -+ hc->complete_split = qtd->complete_split = 0; -+ else -+ hc->complete_split = qtd->complete_split; -+ -+ hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &port_addr); -+ hc->hub_addr = (uint8_t) hub_addr; -+ hc->port_addr = (uint8_t) port_addr; -+ } -+ -+ switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) { -+ case UE_CONTROL: -+ hc->ep_type = DWC_OTG_EP_TYPE_CONTROL; -+ switch (qtd->control_phase) { -+ case DWC_OTG_CONTROL_SETUP: -+ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n"); -+ hc->do_ping = 0; -+ hc->ep_is_in = 0; -+ hc->data_pid_start = DWC_OTG_HC_PID_SETUP; -+ if (hcd->core_if->dma_enable) { -+ hc->xfer_buff = (uint8_t *) urb->setup_dma; -+ } else { -+ hc->xfer_buff = (uint8_t *) urb->setup_packet; -+ } -+ hc->xfer_len = 8; -+ ptr = NULL; -+ break; -+ case DWC_OTG_CONTROL_DATA: -+ DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n"); -+ hc->data_pid_start = qtd->data_toggle; -+ break; -+ case DWC_OTG_CONTROL_STATUS: -+ /* -+ * Direction is opposite of data direction or IN if no -+ * data. -+ */ -+ DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n"); -+ if (urb->length == 0) { -+ hc->ep_is_in = 1; -+ } else { -+ hc->ep_is_in = -+ dwc_otg_hcd_is_pipe_out(&urb->pipe_info); -+ } -+ if (hc->ep_is_in) { -+ hc->do_ping = 0; -+ } -+ -+ hc->data_pid_start = DWC_OTG_HC_PID_DATA1; -+ -+ hc->xfer_len = 0; -+ if (hcd->core_if->dma_enable) { -+ hc->xfer_buff = (uint8_t *) hcd->status_buf_dma; -+ } else { -+ hc->xfer_buff = (uint8_t *) hcd->status_buf; -+ } -+ ptr = NULL; -+ break; -+ } -+ break; -+ case UE_BULK: -+ hc->ep_type = DWC_OTG_EP_TYPE_BULK; -+ break; -+ case UE_INTERRUPT: -+ hc->ep_type = DWC_OTG_EP_TYPE_INTR; -+ break; -+ case UE_ISOCHRONOUS: -+ { -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc; -+ -+ hc->ep_type = DWC_OTG_EP_TYPE_ISOC; -+ -+ if (hcd->core_if->dma_desc_enable) -+ break; -+ -+ frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; -+ -+ frame_desc->status = 0; -+ -+ if (hcd->core_if->dma_enable) { -+ hc->xfer_buff = (uint8_t *) urb->dma; -+ } else { -+ hc->xfer_buff = (uint8_t *) urb->buf; -+ } -+ hc->xfer_buff += -+ frame_desc->offset + qtd->isoc_split_offset; -+ hc->xfer_len = -+ frame_desc->length - qtd->isoc_split_offset; -+ -+ /* For non-dword aligned buffers */ -+ if (((unsigned long)hc->xfer_buff & 0x3) -+ && hcd->core_if->dma_enable) { -+ ptr = -+ (uint8_t *) urb->buf + frame_desc->offset + -+ qtd->isoc_split_offset; -+ } else -+ ptr = NULL; -+ -+ if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) { -+ if (hc->xfer_len <= 188) { -+ hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL; -+ } else { -+ hc->xact_pos = -+ DWC_HCSPLIT_XACTPOS_BEGIN; -+ } -+ } -+ } -+ break; -+ } -+ /* non DWORD-aligned buffer case */ -+ if (ptr) { -+ uint32_t buf_size; -+ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { -+ buf_size = hcd->core_if->core_params->max_transfer_size; -+ } else { -+ buf_size = 4096; -+ } -+ if (!qh->dw_align_buf) { -+ qh->dw_align_buf = DWC_DMA_ALLOC_ATOMIC(dev, buf_size, -+ &qh->dw_align_buf_dma); -+ if (!qh->dw_align_buf) { -+ DWC_ERROR -+ ("%s: Failed to allocate memory to handle " -+ "non-dword aligned buffer case\n", -+ __func__); -+ return; -+ } -+ } -+ if (!hc->ep_is_in) { -+ dwc_memcpy(qh->dw_align_buf, ptr, hc->xfer_len); -+ } -+ hc->align_buff = qh->dw_align_buf_dma; -+ } else { -+ hc->align_buff = 0; -+ } -+ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || -+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { -+ /* -+ * This value may be modified when the transfer is started to -+ * reflect the actual transfer length. -+ */ -+ hc->multi_count = dwc_hb_mult(qh->maxp); -+ } -+ -+ if (hcd->core_if->dma_desc_enable) -+ hc->desc_list_addr = qh->desc_list_dma; -+ -+ dwc_otg_hc_init(hcd->core_if, hc); -+ -+ local_irq_save(flags); -+ -+ if (fiq_enable) { -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&hcd->fiq_state->lock); -+ } -+ -+ /* Enable the top level host channel interrupt. */ -+ intr_enable = (1 << hc->hc_num); -+ DWC_MODIFY_REG32(&hcd->core_if->host_if->host_global_regs->haintmsk, 0, intr_enable); -+ -+ /* Make sure host channel interrupts are enabled. */ -+ gintmsk.b.hcintr = 1; -+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, 0, gintmsk.d32); -+ -+ if (fiq_enable) { -+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } -+ -+ local_irq_restore(flags); -+ hc->qh = qh; -+} -+ -+ -+/** -+ * fiq_fsm_transaction_suitable() - Test a QH for compatibility with the FIQ -+ * @qh: pointer to the endpoint's queue head -+ * -+ * Transaction start/end control flow is grafted onto the existing dwc_otg -+ * mechanisms, to avoid spaghettifying the functions more than they already are. -+ * This function's eligibility check is altered by debug parameter. -+ * -+ * Returns: 0 for unsuitable, 1 implies the FIQ can be enabled for this transaction. -+ */ -+ -+int fiq_fsm_transaction_suitable(dwc_otg_qh_t *qh) -+{ -+ if (qh->do_split) { -+ switch (qh->ep_type) { -+ case UE_CONTROL: -+ case UE_BULK: -+ if (fiq_fsm_mask & (1 << 0)) -+ return 1; -+ break; -+ case UE_INTERRUPT: -+ case UE_ISOCHRONOUS: -+ if (fiq_fsm_mask & (1 << 1)) -+ return 1; -+ break; -+ default: -+ break; -+ } -+ } else if (qh->ep_type == UE_ISOCHRONOUS) { -+ if (fiq_fsm_mask & (1 << 2)) { -+ /* HS ISOCH support. We test for compatibility: -+ * - DWORD aligned buffers -+ * - Must be at least 2 transfers (otherwise pointless to use the FIQ) -+ * If yes, then the fsm enqueue function will handle the state machine setup. -+ */ -+ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); -+ dwc_otg_hcd_urb_t *urb = qtd->urb; -+ struct dwc_otg_hcd_iso_packet_desc (*iso_descs)[0] = &urb->iso_descs; -+ int nr_iso_frames = urb->packet_count; -+ int i; -+ uint32_t ptr; -+ -+ if (nr_iso_frames < 2) -+ return 0; -+ for (i = 0; i < nr_iso_frames; i++) { -+ ptr = urb->dma + iso_descs[i]->offset; -+ if (ptr & 0x3) { -+ printk_ratelimited("%s: Non-Dword aligned isochronous frame offset." -+ " Cannot queue FIQ-accelerated transfer to device %d endpoint %d\n", -+ __FUNCTION__, qh->channel->dev_addr, qh->channel->ep_num); -+ return 0; -+ } -+ } -+ return 1; -+ } -+ } -+ return 0; -+} -+ -+/** -+ * fiq_fsm_setup_periodic_dma() - Set up DMA bounce buffers -+ * @hcd: Pointer to the dwc_otg_hcd struct -+ * @qh: Pointer to the endpoint's queue head -+ * -+ * Periodic split transactions are transmitted modulo 188 bytes. -+ * This necessitates slicing data up into buckets for isochronous out -+ * and fixing up the DMA address for all IN transfers. -+ * -+ * Returns 1 if the DMA bounce buffers have been used, 0 if the default -+ * HC buffer has been used. -+ */ -+int fiq_fsm_setup_periodic_dma(dwc_otg_hcd_t *hcd, struct fiq_channel_state *st, dwc_otg_qh_t *qh) -+ { -+ int frame_length, i = 0; -+ uint8_t *ptr = NULL; -+ dwc_hc_t *hc = qh->channel; -+ struct fiq_dma_blob *blob; -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc; -+ -+ for (i = 0; i < 6; i++) { -+ st->dma_info.slot_len[i] = 255; -+ } -+ st->dma_info.index = 0; -+ i = 0; -+ if (hc->ep_is_in) { -+ /* -+ * Set dma_regs to bounce buffer. FIQ will update the -+ * state depending on transaction progress. -+ */ -+ blob = (struct fiq_dma_blob *) hcd->fiq_state->dma_base; -+ st->hcdma_copy.d32 = (uint32_t) &blob->channel[hc->hc_num].index[0].buf[0]; -+ /* Calculate the max number of CSPLITS such that the FIQ can time out -+ * a transaction if it fails. -+ */ -+ frame_length = st->hcchar_copy.b.mps; -+ do { -+ i++; -+ frame_length -= 188; -+ } while (frame_length >= 0); -+ st->nrpackets = i; -+ return 1; -+ } else { -+ if (qh->ep_type == UE_ISOCHRONOUS) { -+ -+ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); -+ -+ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; -+ frame_length = frame_desc->length; -+ -+ /* Virtual address for bounce buffers */ -+ blob = hcd->fiq_dmab; -+ -+ ptr = qtd->urb->buf + frame_desc->offset; -+ if (frame_length == 0) { -+ /* -+ * for isochronous transactions, we must still transmit a packet -+ * even if the length is zero. -+ */ -+ st->dma_info.slot_len[0] = 0; -+ st->nrpackets = 1; -+ } else { -+ do { -+ if (frame_length <= 188) { -+ dwc_memcpy(&blob->channel[hc->hc_num].index[i].buf[0], ptr, frame_length); -+ st->dma_info.slot_len[i] = frame_length; -+ ptr += frame_length; -+ } else { -+ dwc_memcpy(&blob->channel[hc->hc_num].index[i].buf[0], ptr, 188); -+ st->dma_info.slot_len[i] = 188; -+ ptr += 188; -+ } -+ i++; -+ frame_length -= 188; -+ } while (frame_length > 0); -+ st->nrpackets = i; -+ } -+ ptr = qtd->urb->buf + frame_desc->offset; -+ /* Point the HC at the DMA address of the bounce buffers */ -+ blob = (struct fiq_dma_blob *) hcd->fiq_state->dma_base; -+ st->hcdma_copy.d32 = (uint32_t) &blob->channel[hc->hc_num].index[0].buf[0]; -+ -+ /* fixup xfersize to the actual packet size */ -+ st->hctsiz_copy.b.pid = 0; -+ st->hctsiz_copy.b.xfersize = st->dma_info.slot_len[0]; -+ return 1; -+ } else { -+ /* For interrupt, single OUT packet required, goes in the SSPLIT from hc_buff. */ -+ return 0; -+ } -+ } -+} -+ -+/* -+ * Pushing a periodic request into the queue near the EOF1 point -+ * in a microframe causes erroneous behaviour (frmovrun) interrupt. -+ * Usually, the request goes out on the bus causing a transfer but -+ * the core does not transfer the data to memory. -+ * This guard interval (in number of 60MHz clocks) is required which -+ * must cater for CPU latency between reading the value and enabling -+ * the channel. -+ */ -+#define PERIODIC_FRREM_BACKOFF 1000 -+ -+int fiq_fsm_queue_isoc_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) -+{ -+ dwc_hc_t *hc = qh->channel; -+ dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; -+ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); -+ int frame; -+ struct fiq_channel_state *st = &hcd->fiq_state->channel[hc->hc_num]; -+ int xfer_len, nrpackets; -+ hcdma_data_t hcdma; -+ hfnum_data_t hfnum; -+ -+ if (st->fsm != FIQ_PASSTHROUGH) -+ return 0; -+ -+ st->nr_errors = 0; -+ -+ st->hcchar_copy.d32 = 0; -+ st->hcchar_copy.b.mps = hc->max_packet; -+ st->hcchar_copy.b.epdir = hc->ep_is_in; -+ st->hcchar_copy.b.devaddr = hc->dev_addr; -+ st->hcchar_copy.b.epnum = hc->ep_num; -+ st->hcchar_copy.b.eptype = hc->ep_type; -+ -+ st->hcintmsk_copy.b.chhltd = 1; -+ -+ frame = dwc_otg_hcd_get_frame_number(hcd); -+ st->hcchar_copy.b.oddfrm = (frame & 0x1) ? 0 : 1; -+ -+ st->hcchar_copy.b.lspddev = 0; -+ /* Enable the channel later as a final register write. */ -+ -+ st->hcsplt_copy.d32 = 0; -+ -+ st->hs_isoc_info.iso_desc = (struct dwc_otg_hcd_iso_packet_desc *) &qtd->urb->iso_descs; -+ st->hs_isoc_info.nrframes = qtd->urb->packet_count; -+ /* grab the next DMA address offset from the array */ -+ st->hcdma_copy.d32 = qtd->urb->dma; -+ hcdma.d32 = st->hcdma_copy.d32 + st->hs_isoc_info.iso_desc[0].offset; -+ -+ /* We need to set multi_count. This is a bit tricky - has to be set per-transaction as -+ * the core needs to be told to send the correct number. Caution: for IN transfers, -+ * this is always set to the maximum size of the endpoint. */ -+ xfer_len = st->hs_isoc_info.iso_desc[0].length; -+ nrpackets = (xfer_len + st->hcchar_copy.b.mps - 1) / st->hcchar_copy.b.mps; -+ if (nrpackets == 0) -+ nrpackets = 1; -+ st->hcchar_copy.b.multicnt = nrpackets; -+ st->hctsiz_copy.b.pktcnt = nrpackets; -+ -+ /* Initial PID also needs to be set */ -+ if (st->hcchar_copy.b.epdir == 0) { -+ st->hctsiz_copy.b.xfersize = xfer_len; -+ switch (st->hcchar_copy.b.multicnt) { -+ case 1: -+ st->hctsiz_copy.b.pid = DWC_PID_DATA0; -+ break; -+ case 2: -+ case 3: -+ st->hctsiz_copy.b.pid = DWC_PID_MDATA; -+ break; -+ } -+ -+ } else { -+ st->hctsiz_copy.b.xfersize = nrpackets * st->hcchar_copy.b.mps; -+ switch (st->hcchar_copy.b.multicnt) { -+ case 1: -+ st->hctsiz_copy.b.pid = DWC_PID_DATA0; -+ break; -+ case 2: -+ st->hctsiz_copy.b.pid = DWC_PID_DATA1; -+ break; -+ case 3: -+ st->hctsiz_copy.b.pid = DWC_PID_DATA2; -+ break; -+ } -+ } -+ -+ st->hs_isoc_info.stride = qh->interval; -+ st->uframe_sleeps = 0; -+ -+ fiq_print(FIQDBG_INT, hcd->fiq_state, "FSMQ %01d ", hc->hc_num); -+ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcchar_copy.d32); -+ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hctsiz_copy.d32); -+ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcdma_copy.d32); -+ hfnum.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum); -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&hcd->fiq_state->lock); -+ DWC_WRITE_REG32(&hc_regs->hctsiz, st->hctsiz_copy.d32); -+ DWC_WRITE_REG32(&hc_regs->hcsplt, st->hcsplt_copy.d32); -+ DWC_WRITE_REG32(&hc_regs->hcdma, st->hcdma_copy.d32); -+ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32); -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, st->hcintmsk_copy.d32); -+ if (hfnum.b.frrem < PERIODIC_FRREM_BACKOFF) { -+ /* Prevent queueing near EOF1. Bad things happen if a periodic -+ * split transaction is queued very close to EOF. SOF interrupt handler -+ * will wake this channel at the next interrupt. -+ */ -+ st->fsm = FIQ_HS_ISOC_SLEEPING; -+ st->uframe_sleeps = 1; -+ } else { -+ st->fsm = FIQ_HS_ISOC_TURBO; -+ st->hcchar_copy.b.chen = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32); -+ } -+ mb(); -+ st->hcchar_copy.b.chen = 0; -+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); -+ local_fiq_enable(); -+ return 0; -+} -+ -+ -+/** -+ * fiq_fsm_queue_split_transaction() - Set up a host channel and FIQ state -+ * @hcd: Pointer to the dwc_otg_hcd struct -+ * @qh: Pointer to the endpoint's queue head -+ * -+ * This overrides the dwc_otg driver's normal method of queueing a transaction. -+ * Called from dwc_otg_hcd_queue_transactions(), this performs specific setup -+ * for the nominated host channel. -+ * -+ * For periodic transfers, it also peeks at the FIQ state to see if an immediate -+ * start is possible. If not, then the FIQ is left to start the transfer. -+ */ -+int fiq_fsm_queue_split_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) -+{ -+ int start_immediate = 1, i; -+ hfnum_data_t hfnum; -+ dwc_hc_t *hc = qh->channel; -+ dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; -+ /* Program HC registers, setup FIQ_state, examine FIQ if periodic, start transfer (not if uframe 5) */ -+ int hub_addr, port_addr, frame, uframe; -+ struct fiq_channel_state *st = &hcd->fiq_state->channel[hc->hc_num]; -+ -+ if (st->fsm != FIQ_PASSTHROUGH) -+ return 0; -+ st->nr_errors = 0; -+ -+ st->hcchar_copy.d32 = 0; -+ st->hcchar_copy.b.mps = hc->max_packet; -+ st->hcchar_copy.b.epdir = hc->ep_is_in; -+ st->hcchar_copy.b.devaddr = hc->dev_addr; -+ st->hcchar_copy.b.epnum = hc->ep_num; -+ st->hcchar_copy.b.eptype = hc->ep_type; -+ if (hc->ep_type & 0x1) { -+ if (hc->ep_is_in) -+ st->hcchar_copy.b.multicnt = 3; -+ else -+ /* Docs say set this to 1, but driver sets to 0! */ -+ st->hcchar_copy.b.multicnt = 0; -+ } else { -+ st->hcchar_copy.b.multicnt = 1; -+ st->hcchar_copy.b.oddfrm = 0; -+ } -+ st->hcchar_copy.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW) ? 1 : 0; -+ /* Enable the channel later as a final register write. */ -+ -+ st->hcsplt_copy.d32 = 0; -+ if(qh->do_split) { -+ hcd->fops->hub_info(hcd, DWC_CIRCLEQ_FIRST(&qh->qtd_list)->urb->priv, &hub_addr, &port_addr); -+ st->hcsplt_copy.b.compsplt = 0; -+ st->hcsplt_copy.b.spltena = 1; -+ // XACTPOS is for isoc-out only but needs initialising anyway. -+ st->hcsplt_copy.b.xactpos = ISOC_XACTPOS_ALL; -+ if((qh->ep_type == DWC_OTG_EP_TYPE_ISOC) && (!qh->ep_is_in)) { -+ /* For packetsize 0 < L < 188, ISOC_XACTPOS_ALL. -+ * for longer than this, ISOC_XACTPOS_BEGIN and the FIQ -+ * will update as necessary. -+ */ -+ if (hc->xfer_len > 188) { -+ st->hcsplt_copy.b.xactpos = ISOC_XACTPOS_BEGIN; -+ } -+ } -+ st->hcsplt_copy.b.hubaddr = (uint8_t) hub_addr; -+ st->hcsplt_copy.b.prtaddr = (uint8_t) port_addr; -+ st->hub_addr = hub_addr; -+ st->port_addr = port_addr; -+ } -+ -+ st->hctsiz_copy.d32 = 0; -+ st->hctsiz_copy.b.dopng = 0; -+ st->hctsiz_copy.b.pid = hc->data_pid_start; -+ -+ if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) { -+ hc->xfer_len = hc->max_packet; -+ } else if (!hc->ep_is_in && (hc->xfer_len > 188)) { -+ hc->xfer_len = 188; -+ } -+ st->hctsiz_copy.b.xfersize = hc->xfer_len; -+ -+ st->hctsiz_copy.b.pktcnt = 1; -+ -+ if (hc->ep_type & 0x1) { -+ /* -+ * For potentially multi-packet transfers, must use the DMA bounce buffers. For IN transfers, -+ * the DMA address is the address of the first 188byte slot buffer in the bounce buffer array. -+ * For multi-packet OUT transfers, we need to copy the data into the bounce buffer array so the FIQ can punt -+ * the right address out as necessary. hc->xfer_buff and hc->xfer_len have already been set -+ * in assign_and_init_hc(), but this is for the eventual transaction completion only. The FIQ -+ * must not touch internal driver state. -+ */ -+ if(!fiq_fsm_setup_periodic_dma(hcd, st, qh)) { -+ if (hc->align_buff) { -+ st->hcdma_copy.d32 = hc->align_buff; -+ } else { -+ st->hcdma_copy.d32 = ((unsigned long) hc->xfer_buff & 0xFFFFFFFF); -+ } -+ } -+ } else { -+ if (hc->align_buff) { -+ st->hcdma_copy.d32 = hc->align_buff; -+ } else { -+ st->hcdma_copy.d32 = ((unsigned long) hc->xfer_buff & 0xFFFFFFFF); -+ } -+ } -+ /* The FIQ depends upon no other interrupts being enabled except channel halt. -+ * Fixup channel interrupt mask. */ -+ st->hcintmsk_copy.d32 = 0; -+ st->hcintmsk_copy.b.chhltd = 1; -+ st->hcintmsk_copy.b.ahberr = 1; -+ -+ /* Hack courtesy of FreeBSD: apparently forcing Interrupt Split transactions -+ * as Control puts the transfer into the non-periodic request queue and the -+ * non-periodic handler in the hub. Makes things lots easier. -+ */ -+ if ((fiq_fsm_mask & 0x8) && hc->ep_type == UE_INTERRUPT) { -+ st->hcchar_copy.b.multicnt = 0; -+ st->hcchar_copy.b.oddfrm = 0; -+ st->hcchar_copy.b.eptype = UE_CONTROL; -+ if (hc->align_buff) { -+ st->hcdma_copy.d32 = hc->align_buff; -+ } else { -+ st->hcdma_copy.d32 = ((unsigned long) hc->xfer_buff & 0xFFFFFFFF); -+ } -+ } -+ DWC_WRITE_REG32(&hc_regs->hcdma, st->hcdma_copy.d32); -+ DWC_WRITE_REG32(&hc_regs->hctsiz, st->hctsiz_copy.d32); -+ DWC_WRITE_REG32(&hc_regs->hcsplt, st->hcsplt_copy.d32); -+ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32); -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, st->hcintmsk_copy.d32); -+ -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&hcd->fiq_state->lock); -+ -+ if (hc->ep_type & 0x1) { -+ hfnum.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum); -+ frame = (hfnum.b.frnum & ~0x7) >> 3; -+ uframe = hfnum.b.frnum & 0x7; -+ if (hfnum.b.frrem < PERIODIC_FRREM_BACKOFF) { -+ /* Prevent queueing near EOF1. Bad things happen if a periodic -+ * split transaction is queued very close to EOF. -+ */ -+ start_immediate = 0; -+ } else if (uframe == 5) { -+ start_immediate = 0; -+ } else if (hc->ep_type == UE_ISOCHRONOUS && !hc->ep_is_in) { -+ start_immediate = 0; -+ } else if (hc->ep_is_in && fiq_fsm_too_late(hcd->fiq_state, hc->hc_num)) { -+ start_immediate = 0; -+ } else { -+ /* Search through all host channels to determine if a transaction -+ * is currently in progress */ -+ for (i = 0; i < hcd->core_if->core_params->host_channels; i++) { -+ if (i == hc->hc_num || hcd->fiq_state->channel[i].fsm == FIQ_PASSTHROUGH) -+ continue; -+ switch (hcd->fiq_state->channel[i].fsm) { -+ /* TT is reserved for channels that are in the middle of a periodic -+ * split transaction. -+ */ -+ case FIQ_PER_SSPLIT_STARTED: -+ case FIQ_PER_CSPLIT_WAIT: -+ case FIQ_PER_CSPLIT_NYET1: -+ case FIQ_PER_CSPLIT_POLL: -+ case FIQ_PER_ISO_OUT_ACTIVE: -+ case FIQ_PER_ISO_OUT_LAST: -+ if (hcd->fiq_state->channel[i].hub_addr == hub_addr && -+ hcd->fiq_state->channel[i].port_addr == port_addr) { -+ start_immediate = 0; -+ } -+ break; -+ default: -+ break; -+ } -+ if (!start_immediate) -+ break; -+ } -+ } -+ } -+ if ((fiq_fsm_mask & 0x8) && hc->ep_type == UE_INTERRUPT) -+ start_immediate = 1; -+ -+ fiq_print(FIQDBG_INT, hcd->fiq_state, "FSMQ %01d %01d", hc->hc_num, start_immediate); -+ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08d", hfnum.b.frrem); -+ //fiq_print(FIQDBG_INT, hcd->fiq_state, "H:%02dP:%02d", hub_addr, port_addr); -+ //fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hctsiz_copy.d32); -+ //fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcdma_copy.d32); -+ switch (hc->ep_type) { -+ case UE_CONTROL: -+ case UE_BULK: -+ st->fsm = FIQ_NP_SSPLIT_STARTED; -+ break; -+ case UE_ISOCHRONOUS: -+ if (hc->ep_is_in) { -+ if (start_immediate) { -+ st->fsm = FIQ_PER_SSPLIT_STARTED; -+ } else { -+ st->fsm = FIQ_PER_SSPLIT_QUEUED; -+ } -+ } else { -+ if (start_immediate) { -+ /* Single-isoc OUT packets don't require FIQ involvement */ -+ if (st->nrpackets == 1) { -+ st->fsm = FIQ_PER_ISO_OUT_LAST; -+ } else { -+ st->fsm = FIQ_PER_ISO_OUT_ACTIVE; -+ } -+ } else { -+ st->fsm = FIQ_PER_ISO_OUT_PENDING; -+ } -+ } -+ break; -+ case UE_INTERRUPT: -+ if (fiq_fsm_mask & 0x8) { -+ st->fsm = FIQ_NP_SSPLIT_STARTED; -+ } else if (start_immediate) { -+ st->fsm = FIQ_PER_SSPLIT_STARTED; -+ } else { -+ st->fsm = FIQ_PER_SSPLIT_QUEUED; -+ } -+ default: -+ break; -+ } -+ if (start_immediate) { -+ /* Set the oddfrm bit as close as possible to actual queueing */ -+ frame = dwc_otg_hcd_get_frame_number(hcd); -+ st->expected_uframe = (frame + 1) & 0x3FFF; -+ st->hcchar_copy.b.oddfrm = (frame & 0x1) ? 0 : 1; -+ st->hcchar_copy.b.chen = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32); -+ } -+ mb(); -+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); -+ local_fiq_enable(); -+ return 0; -+} -+ -+ -+/** -+ * This function selects transactions from the HCD transfer schedule and -+ * assigns them to available host channels. It is called from HCD interrupt -+ * handler functions. -+ * -+ * @param hcd The HCD state structure. -+ * -+ * @return The types of new transactions that were assigned to host channels. -+ */ -+dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t * hcd) -+{ -+ dwc_list_link_t *qh_ptr; -+ dwc_otg_qh_t *qh; -+ int num_channels; -+ dwc_irqflags_t flags; -+ dwc_spinlock_t *channel_lock = hcd->channel_lock; -+ dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE; -+ -+#ifdef DEBUG_HOST_CHANNELS -+ last_sel_trans_num_per_scheduled = 0; -+ last_sel_trans_num_nonper_scheduled = 0; -+ last_sel_trans_num_avail_hc_at_start = hcd->available_host_channels; -+#endif /* DEBUG_HOST_CHANNELS */ -+ -+ /* Process entries in the periodic ready list. */ -+ qh_ptr = DWC_LIST_FIRST(&hcd->periodic_sched_ready); -+ -+ while (qh_ptr != &hcd->periodic_sched_ready && -+ !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { -+ -+ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); -+ -+ if (microframe_schedule) { -+ // Make sure we leave one channel for non periodic transactions. -+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); -+ if (hcd->available_host_channels <= 1) { -+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); -+ break; -+ } -+ hcd->available_host_channels--; -+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); -+#ifdef DEBUG_HOST_CHANNELS -+ last_sel_trans_num_per_scheduled++; -+#endif /* DEBUG_HOST_CHANNELS */ -+ } -+ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); -+ assign_and_init_hc(hcd, qh); -+ -+ /* -+ * Move the QH from the periodic ready schedule to the -+ * periodic assigned schedule. -+ */ -+ qh_ptr = DWC_LIST_NEXT(qh_ptr); -+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); -+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, -+ &qh->qh_list_entry); -+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); -+ } -+ -+ /* -+ * Process entries in the inactive portion of the non-periodic -+ * schedule. Some free host channels may not be used if they are -+ * reserved for periodic transfers. -+ */ -+ qh_ptr = hcd->non_periodic_sched_inactive.next; -+ num_channels = hcd->core_if->core_params->host_channels; -+ while (qh_ptr != &hcd->non_periodic_sched_inactive && -+ (microframe_schedule || hcd->non_periodic_channels < -+ num_channels - hcd->periodic_channels) && -+ !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { -+ -+ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); -+ /* -+ * Check to see if this is a NAK'd retransmit, in which case ignore for retransmission -+ * we hold off on bulk retransmissions to reduce NAK interrupt overhead for full-speed -+ * cheeky devices that just hold off using NAKs -+ */ -+ if (fiq_enable && nak_holdoff && qh->do_split) { -+ if (qh->nak_frame != 0xffff) { -+ uint16_t next_frame = dwc_frame_num_inc(qh->nak_frame, (qh->ep_type == UE_BULK) ? nak_holdoff : 8); -+ uint16_t frame = dwc_otg_hcd_get_frame_number(hcd); -+ if (dwc_frame_num_le(frame, next_frame)) { -+ if(dwc_frame_num_le(next_frame, hcd->fiq_state->next_sched_frame)) { -+ hcd->fiq_state->next_sched_frame = next_frame; -+ } -+ qh_ptr = DWC_LIST_NEXT(qh_ptr); -+ continue; -+ } else { -+ qh->nak_frame = 0xFFFF; -+ } -+ } -+ } -+ -+ if (microframe_schedule) { -+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); -+ if (hcd->available_host_channels < 1) { -+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); -+ break; -+ } -+ hcd->available_host_channels--; -+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); -+#ifdef DEBUG_HOST_CHANNELS -+ last_sel_trans_num_nonper_scheduled++; -+#endif /* DEBUG_HOST_CHANNELS */ -+ } -+ -+ assign_and_init_hc(hcd, qh); -+ -+ /* -+ * Move the QH from the non-periodic inactive schedule to the -+ * non-periodic active schedule. -+ */ -+ qh_ptr = DWC_LIST_NEXT(qh_ptr); -+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); -+ DWC_LIST_MOVE_HEAD(&hcd->non_periodic_sched_active, -+ &qh->qh_list_entry); -+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); -+ -+ -+ if (!microframe_schedule) -+ hcd->non_periodic_channels++; -+ } -+ /* we moved a non-periodic QH to the active schedule. If the inactive queue is empty, -+ * stop the FIQ from kicking us. We could potentially still have elements here if we -+ * ran out of host channels. -+ */ -+ if (fiq_enable) { -+ if (DWC_LIST_EMPTY(&hcd->non_periodic_sched_inactive)) { -+ hcd->fiq_state->kick_np_queues = 0; -+ } else { -+ /* For each entry remaining in the NP inactive queue, -+ * if this a NAK'd retransmit then don't set the kick flag. -+ */ -+ if(nak_holdoff) { -+ DWC_LIST_FOREACH(qh_ptr, &hcd->non_periodic_sched_inactive) { -+ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); -+ if (qh->nak_frame == 0xFFFF) { -+ hcd->fiq_state->kick_np_queues = 1; -+ } -+ } -+ } -+ } -+ } -+ if(!DWC_LIST_EMPTY(&hcd->periodic_sched_assigned)) -+ ret_val |= DWC_OTG_TRANSACTION_PERIODIC; -+ -+ if(!DWC_LIST_EMPTY(&hcd->non_periodic_sched_active)) -+ ret_val |= DWC_OTG_TRANSACTION_NON_PERIODIC; -+ -+ -+#ifdef DEBUG_HOST_CHANNELS -+ last_sel_trans_num_avail_hc_at_end = hcd->available_host_channels; -+#endif /* DEBUG_HOST_CHANNELS */ -+ return ret_val; -+} -+ -+/** -+ * Attempts to queue a single transaction request for a host channel -+ * associated with either a periodic or non-periodic transfer. This function -+ * assumes that there is space available in the appropriate request queue. For -+ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space -+ * is available in the appropriate Tx FIFO. -+ * -+ * @param hcd The HCD state structure. -+ * @param hc Host channel descriptor associated with either a periodic or -+ * non-periodic transfer. -+ * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx -+ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic -+ * transfers. -+ * -+ * @return 1 if a request is queued and more requests may be needed to -+ * complete the transfer, 0 if no more requests are required for this -+ * transfer, -1 if there is insufficient space in the Tx FIFO. -+ */ -+static int queue_transaction(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, uint16_t fifo_dwords_avail) -+{ -+ int retval; -+ -+ if (hcd->core_if->dma_enable) { -+ if (hcd->core_if->dma_desc_enable) { -+ if (!hc->xfer_started -+ || (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) { -+ dwc_otg_hcd_start_xfer_ddma(hcd, hc->qh); -+ hc->qh->ping_state = 0; -+ } -+ } else if (!hc->xfer_started) { -+ if (fiq_fsm_enable && hc->error_state) { -+ hcd->fiq_state->channel[hc->hc_num].nr_errors = -+ DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list)->error_count; -+ hcd->fiq_state->channel[hc->hc_num].fsm = -+ FIQ_PASSTHROUGH_ERRORSTATE; -+ } -+ dwc_otg_hc_start_transfer(hcd->core_if, hc); -+ hc->qh->ping_state = 0; -+ } -+ retval = 0; -+ } else if (hc->halt_pending) { -+ /* Don't queue a request if the channel has been halted. */ -+ retval = 0; -+ } else if (hc->halt_on_queue) { -+ dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status); -+ retval = 0; -+ } else if (hc->do_ping) { -+ if (!hc->xfer_started) { -+ dwc_otg_hc_start_transfer(hcd->core_if, hc); -+ } -+ retval = 0; -+ } else if (!hc->ep_is_in || hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { -+ if ((fifo_dwords_avail * 4) >= hc->max_packet) { -+ if (!hc->xfer_started) { -+ dwc_otg_hc_start_transfer(hcd->core_if, hc); -+ retval = 1; -+ } else { -+ retval = -+ dwc_otg_hc_continue_transfer(hcd->core_if, -+ hc); -+ } -+ } else { -+ retval = -1; -+ } -+ } else { -+ if (!hc->xfer_started) { -+ dwc_otg_hc_start_transfer(hcd->core_if, hc); -+ retval = 1; -+ } else { -+ retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc); -+ } -+ } -+ -+ return retval; -+} -+ -+/** -+ * Processes periodic channels for the next frame and queues transactions for -+ * these channels to the DWC_otg controller. After queueing transactions, the -+ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions -+ * to queue as Periodic Tx FIFO or request queue space becomes available. -+ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. -+ */ -+static void process_periodic_channels(dwc_otg_hcd_t * hcd) -+{ -+ hptxsts_data_t tx_status; -+ dwc_list_link_t *qh_ptr; -+ dwc_otg_qh_t *qh; -+ int status = 0; -+ int no_queue_space = 0; -+ int no_fifo_space = 0; -+ -+ dwc_otg_host_global_regs_t *host_regs; -+ host_regs = hcd->core_if->host_if->host_global_regs; -+ -+ DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n"); -+#ifdef DEBUG -+ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts); -+ DWC_DEBUGPL(DBG_HCDV, -+ " P Tx Req Queue Space Avail (before queue): %d\n", -+ tx_status.b.ptxqspcavail); -+ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n", -+ tx_status.b.ptxfspcavail); -+#endif -+ -+ qh_ptr = hcd->periodic_sched_assigned.next; -+ while (qh_ptr != &hcd->periodic_sched_assigned) { -+ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts); -+ if (tx_status.b.ptxqspcavail == 0) { -+ no_queue_space = 1; -+ break; -+ } -+ -+ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); -+ -+ // Do not send a split start transaction any later than frame .6 -+ // Note, we have to schedule a periodic in .5 to make it go in .6 -+ if(fiq_fsm_enable && qh->do_split && ((dwc_otg_hcd_get_frame_number(hcd) + 1) & 7) > 6) -+ { -+ qh_ptr = qh_ptr->next; -+ hcd->fiq_state->next_sched_frame = dwc_otg_hcd_get_frame_number(hcd) | 7; -+ continue; -+ } -+ -+ if (fiq_fsm_enable && fiq_fsm_transaction_suitable(qh)) { -+ if (qh->do_split) -+ fiq_fsm_queue_split_transaction(hcd, qh); -+ else -+ fiq_fsm_queue_isoc_transaction(hcd, qh); -+ } else { -+ -+ /* -+ * Set a flag if we're queueing high-bandwidth in slave mode. -+ * The flag prevents any halts to get into the request queue in -+ * the middle of multiple high-bandwidth packets getting queued. -+ */ -+ if (!hcd->core_if->dma_enable && qh->channel->multi_count > 1) { -+ hcd->core_if->queuing_high_bandwidth = 1; -+ } -+ status = queue_transaction(hcd, qh->channel, -+ tx_status.b.ptxfspcavail); -+ if (status < 0) { -+ no_fifo_space = 1; -+ break; -+ } -+ } -+ -+ /* -+ * In Slave mode, stay on the current transfer until there is -+ * nothing more to do or the high-bandwidth request count is -+ * reached. In DMA mode, only need to queue one request. The -+ * controller automatically handles multiple packets for -+ * high-bandwidth transfers. -+ */ -+ if (hcd->core_if->dma_enable || status == 0 || -+ qh->channel->requests == qh->channel->multi_count) { -+ qh_ptr = qh_ptr->next; -+ /* -+ * Move the QH from the periodic assigned schedule to -+ * the periodic queued schedule. -+ */ -+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_queued, -+ &qh->qh_list_entry); -+ -+ /* done queuing high bandwidth */ -+ hcd->core_if->queuing_high_bandwidth = 0; -+ } -+ } -+ -+ if (!hcd->core_if->dma_enable) { -+ dwc_otg_core_global_regs_t *global_regs; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ global_regs = hcd->core_if->core_global_regs; -+ intr_mask.b.ptxfempty = 1; -+#ifdef DEBUG -+ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts); -+ DWC_DEBUGPL(DBG_HCDV, -+ " P Tx Req Queue Space Avail (after queue): %d\n", -+ tx_status.b.ptxqspcavail); -+ DWC_DEBUGPL(DBG_HCDV, -+ " P Tx FIFO Space Avail (after queue): %d\n", -+ tx_status.b.ptxfspcavail); -+#endif -+ if (!DWC_LIST_EMPTY(&hcd->periodic_sched_assigned) || -+ no_queue_space || no_fifo_space) { -+ /* -+ * May need to queue more transactions as the request -+ * queue or Tx FIFO empties. Enable the periodic Tx -+ * FIFO empty interrupt. (Always use the half-empty -+ * level to ensure that new requests are loaded as -+ * soon as possible.) -+ */ -+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, -+ intr_mask.d32); -+ } else { -+ /* -+ * Disable the Tx FIFO empty interrupt since there are -+ * no more transactions that need to be queued right -+ * now. This function is called from interrupt -+ * handlers to queue more transactions as transfer -+ * states change. -+ */ -+ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, -+ 0); -+ } -+ } -+} -+ -+/** -+ * Processes active non-periodic channels and queues transactions for these -+ * channels to the DWC_otg controller. After queueing transactions, the NP Tx -+ * FIFO Empty interrupt is enabled if there are more transactions to queue as -+ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx -+ * FIFO Empty interrupt is disabled. -+ */ -+static void process_non_periodic_channels(dwc_otg_hcd_t * hcd) -+{ -+ gnptxsts_data_t tx_status; -+ dwc_list_link_t *orig_qh_ptr; -+ dwc_otg_qh_t *qh; -+ int status; -+ int no_queue_space = 0; -+ int no_fifo_space = 0; -+ int more_to_do = 0; -+ -+ dwc_otg_core_global_regs_t *global_regs = -+ hcd->core_if->core_global_regs; -+ -+ DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n"); -+#ifdef DEBUG -+ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts); -+ DWC_DEBUGPL(DBG_HCDV, -+ " NP Tx Req Queue Space Avail (before queue): %d\n", -+ tx_status.b.nptxqspcavail); -+ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n", -+ tx_status.b.nptxfspcavail); -+#endif -+ /* -+ * Keep track of the starting point. Skip over the start-of-list -+ * entry. -+ */ -+ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { -+ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; -+ } -+ orig_qh_ptr = hcd->non_periodic_qh_ptr; -+ -+ /* -+ * Process once through the active list or until no more space is -+ * available in the request queue or the Tx FIFO. -+ */ -+ do { -+ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts); -+ if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) { -+ no_queue_space = 1; -+ break; -+ } -+ -+ qh = DWC_LIST_ENTRY(hcd->non_periodic_qh_ptr, dwc_otg_qh_t, -+ qh_list_entry); -+ -+ if(fiq_fsm_enable && fiq_fsm_transaction_suitable(qh)) { -+ fiq_fsm_queue_split_transaction(hcd, qh); -+ } else { -+ status = queue_transaction(hcd, qh->channel, -+ tx_status.b.nptxfspcavail); -+ -+ if (status > 0) { -+ more_to_do = 1; -+ } else if (status < 0) { -+ no_fifo_space = 1; -+ break; -+ } -+ } -+ /* Advance to next QH, skipping start-of-list entry. */ -+ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; -+ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { -+ hcd->non_periodic_qh_ptr = -+ hcd->non_periodic_qh_ptr->next; -+ } -+ -+ } while (hcd->non_periodic_qh_ptr != orig_qh_ptr); -+ -+ if (!hcd->core_if->dma_enable) { -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ intr_mask.b.nptxfempty = 1; -+ -+#ifdef DEBUG -+ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts); -+ DWC_DEBUGPL(DBG_HCDV, -+ " NP Tx Req Queue Space Avail (after queue): %d\n", -+ tx_status.b.nptxqspcavail); -+ DWC_DEBUGPL(DBG_HCDV, -+ " NP Tx FIFO Space Avail (after queue): %d\n", -+ tx_status.b.nptxfspcavail); -+#endif -+ if (more_to_do || no_queue_space || no_fifo_space) { -+ /* -+ * May need to queue more transactions as the request -+ * queue or Tx FIFO empties. Enable the non-periodic -+ * Tx FIFO empty interrupt. (Always use the half-empty -+ * level to ensure that new requests are loaded as -+ * soon as possible.) -+ */ -+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, -+ intr_mask.d32); -+ } else { -+ /* -+ * Disable the Tx FIFO empty interrupt since there are -+ * no more transactions that need to be queued right -+ * now. This function is called from interrupt -+ * handlers to queue more transactions as transfer -+ * states change. -+ */ -+ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, -+ 0); -+ } -+ } -+} -+ -+/** -+ * This function processes the currently active host channels and queues -+ * transactions for these channels to the DWC_otg controller. It is called -+ * from HCD interrupt handler functions. -+ * -+ * @param hcd The HCD state structure. -+ * @param tr_type The type(s) of transactions to queue (non-periodic, -+ * periodic, or both). -+ */ -+void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd, -+ dwc_otg_transaction_type_e tr_type) -+{ -+#ifdef DEBUG_SOF -+ DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n"); -+#endif -+ /* Process host channels associated with periodic transfers. */ -+ if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC || -+ tr_type == DWC_OTG_TRANSACTION_ALL) && -+ !DWC_LIST_EMPTY(&hcd->periodic_sched_assigned)) { -+ -+ process_periodic_channels(hcd); -+ } -+ -+ /* Process host channels associated with non-periodic transfers. */ -+ if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC || -+ tr_type == DWC_OTG_TRANSACTION_ALL) { -+ if (!DWC_LIST_EMPTY(&hcd->non_periodic_sched_active)) { -+ process_non_periodic_channels(hcd); -+ } else { -+ /* -+ * Ensure NP Tx FIFO empty interrupt is disabled when -+ * there are no non-periodic transfers to process. -+ */ -+ gintmsk_data_t gintmsk = {.d32 = 0 }; -+ gintmsk.b.nptxfempty = 1; -+ -+ if (fiq_enable) { -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&hcd->fiq_state->lock); -+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0); -+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } else { -+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0); -+ } -+ } -+ } -+} -+ -+#ifdef DWC_HS_ELECT_TST -+/* -+ * Quick and dirty hack to implement the HS Electrical Test -+ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature. -+ * -+ * This code was copied from our userspace app "hset". It sends a -+ * Get Device Descriptor control sequence in two parts, first the -+ * Setup packet by itself, followed some time later by the In and -+ * Ack packets. Rather than trying to figure out how to add this -+ * functionality to the normal driver code, we just hijack the -+ * hardware, using these two function to drive the hardware -+ * directly. -+ */ -+ -+static dwc_otg_core_global_regs_t *global_regs; -+static dwc_otg_host_global_regs_t *hc_global_regs; -+static dwc_otg_hc_regs_t *hc_regs; -+static uint32_t *data_fifo; -+ -+static void do_setup(void) -+{ -+ gintsts_data_t gintsts; -+ hctsiz_data_t hctsiz; -+ hcchar_data_t hcchar; -+ haint_data_t haint; -+ hcint_data_t hcint; -+ -+ /* Enable HAINTs */ -+ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001); -+ -+ /* Enable HCINTs */ -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* -+ * Send Setup packet (Get Device Descriptor) -+ */ -+ -+ /* Make sure channel is disabled */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ if (hcchar.b.chen) { -+ hcchar.b.chdis = 1; -+// hcchar.b.chen = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ //sleep(1); -+ dwc_mdelay(1000); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ } -+ -+ /* Set HCTSIZ */ -+ hctsiz.d32 = 0; -+ hctsiz.b.xfersize = 8; -+ hctsiz.b.pktcnt = 1; -+ hctsiz.b.pid = DWC_OTG_HC_PID_SETUP; -+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); -+ -+ /* Set HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; -+ hcchar.b.epdir = 0; -+ hcchar.b.epnum = 0; -+ hcchar.b.mps = 8; -+ hcchar.b.chen = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ -+ /* Fill FIFO with Setup data for Get Device Descriptor */ -+ data_fifo = (uint32_t *) ((char *)global_regs + 0x1000); -+ DWC_WRITE_REG32(data_fifo++, 0x01000680); -+ DWC_WRITE_REG32(data_fifo++, 0x00080000); -+ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Wait for host channel interrupt */ -+ do { -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ } while (gintsts.b.hcintr == 0); -+ -+ /* Disable HCINTs */ -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000); -+ -+ /* Disable HAINTs */ -+ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000); -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+} -+ -+static void do_in_ack(void) -+{ -+ gintsts_data_t gintsts; -+ hctsiz_data_t hctsiz; -+ hcchar_data_t hcchar; -+ haint_data_t haint; -+ hcint_data_t hcint; -+ host_grxsts_data_t grxsts; -+ -+ /* Enable HAINTs */ -+ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001); -+ -+ /* Enable HCINTs */ -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* -+ * Receive Control In packet -+ */ -+ -+ /* Make sure channel is disabled */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ if (hcchar.b.chen) { -+ hcchar.b.chdis = 1; -+ hcchar.b.chen = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ //sleep(1); -+ dwc_mdelay(1000); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ } -+ -+ /* Set HCTSIZ */ -+ hctsiz.d32 = 0; -+ hctsiz.b.xfersize = 8; -+ hctsiz.b.pktcnt = 1; -+ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; -+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); -+ -+ /* Set HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; -+ hcchar.b.epdir = 1; -+ hcchar.b.epnum = 0; -+ hcchar.b.mps = 8; -+ hcchar.b.chen = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Wait for receive status queue interrupt */ -+ do { -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ } while (gintsts.b.rxstsqlvl == 0); -+ -+ /* Read RXSTS */ -+ grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp); -+ -+ /* Clear RXSTSQLVL in GINTSTS */ -+ gintsts.d32 = 0; -+ gintsts.b.rxstsqlvl = 1; -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ switch (grxsts.b.pktsts) { -+ case DWC_GRXSTS_PKTSTS_IN: -+ /* Read the data into the host buffer */ -+ if (grxsts.b.bcnt > 0) { -+ int i; -+ int word_count = (grxsts.b.bcnt + 3) / 4; -+ -+ data_fifo = (uint32_t *) ((char *)global_regs + 0x1000); -+ -+ for (i = 0; i < word_count; i++) { -+ (void)DWC_READ_REG32(data_fifo++); -+ } -+ } -+ break; -+ -+ default: -+ break; -+ } -+ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Wait for receive status queue interrupt */ -+ do { -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ } while (gintsts.b.rxstsqlvl == 0); -+ -+ /* Read RXSTS */ -+ grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp); -+ -+ /* Clear RXSTSQLVL in GINTSTS */ -+ gintsts.d32 = 0; -+ gintsts.b.rxstsqlvl = 1; -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ switch (grxsts.b.pktsts) { -+ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: -+ break; -+ -+ default: -+ break; -+ } -+ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Wait for host channel interrupt */ -+ do { -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ } while (gintsts.b.hcintr == 0); -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+// usleep(100000); -+// mdelay(100); -+ dwc_mdelay(1); -+ -+ /* -+ * Send handshake packet -+ */ -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Make sure channel is disabled */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ if (hcchar.b.chen) { -+ hcchar.b.chdis = 1; -+ hcchar.b.chen = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ //sleep(1); -+ dwc_mdelay(1000); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ } -+ -+ /* Set HCTSIZ */ -+ hctsiz.d32 = 0; -+ hctsiz.b.xfersize = 0; -+ hctsiz.b.pktcnt = 1; -+ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; -+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); -+ -+ /* Set HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; -+ hcchar.b.epdir = 0; -+ hcchar.b.epnum = 0; -+ hcchar.b.mps = 8; -+ hcchar.b.chen = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Wait for host channel interrupt */ -+ do { -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ } while (gintsts.b.hcintr == 0); -+ -+ /* Disable HCINTs */ -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000); -+ -+ /* Disable HAINTs */ -+ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000); -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+} -+#endif -+ -+/** Handles hub class-specific requests. */ -+int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd, -+ uint16_t typeReq, -+ uint16_t wValue, -+ uint16_t wIndex, uint8_t * buf, uint16_t wLength) -+{ -+ int retval = 0; -+ -+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; -+ usb_hub_descriptor_t *hub_desc; -+ hprt0_data_t hprt0 = {.d32 = 0 }; -+ -+ uint32_t port_status; -+ -+ switch (typeReq) { -+ case UCR_CLEAR_HUB_FEATURE: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearHubFeature 0x%x\n", wValue); -+ switch (wValue) { -+ case UHF_C_HUB_LOCAL_POWER: -+ case UHF_C_HUB_OVER_CURRENT: -+ /* Nothing required here */ -+ break; -+ default: -+ retval = -DWC_E_INVALID; -+ DWC_ERROR("DWC OTG HCD - " -+ "ClearHubFeature request %xh unknown\n", -+ wValue); -+ } -+ break; -+ case UCR_CLEAR_PORT_FEATURE: -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ if (wValue != UHF_PORT_L1) -+#endif -+ if (!wIndex || wIndex > 1) -+ goto error; -+ -+ switch (wValue) { -+ case UHF_PORT_ENABLE: -+ DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtena = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ break; -+ case UHF_PORT_SUSPEND: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); -+ -+ if (core_if->power_down == 2) { -+ dwc_otg_host_hibernation_restore(core_if, 0, 0); -+ } else { -+ DWC_WRITE_REG32(core_if->pcgcctl, 0); -+ dwc_mdelay(5); -+ -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtres = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ hprt0.b.prtsusp = 0; -+ /* Clear Resume bit */ -+ dwc_mdelay(100); -+ hprt0.b.prtres = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ } -+ break; -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ case UHF_PORT_L1: -+ { -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ glpmcfg_data_t lpmcfg = {.d32 = 0 }; -+ -+ lpmcfg.d32 = -+ DWC_READ_REG32(&core_if-> -+ core_global_regs->glpmcfg); -+ lpmcfg.b.en_utmi_sleep = 0; -+ lpmcfg.b.hird_thres &= (~(1 << 4)); -+ lpmcfg.b.prt_sleep_sts = 1; -+ DWC_WRITE_REG32(&core_if-> -+ core_global_regs->glpmcfg, -+ lpmcfg.d32); -+ -+ /* Clear Enbl_L1Gating bit. */ -+ pcgcctl.b.enbl_sleep_gating = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, -+ 0); -+ -+ dwc_mdelay(5); -+ -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtres = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, -+ hprt0.d32); -+ /* This bit will be cleared in wakeup interrupt handle */ -+ break; -+ } -+#endif -+ case UHF_PORT_POWER: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_POWER\n"); -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtpwr = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ break; -+ case UHF_PORT_INDICATOR: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); -+ /* Port inidicator not supported */ -+ break; -+ case UHF_C_PORT_CONNECTION: -+ /* Clears drivers internal connect status change -+ * flag */ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); -+ dwc_otg_hcd->flags.b.port_connect_status_change = 0; -+ break; -+ case UHF_C_PORT_RESET: -+ /* Clears the driver's internal Port Reset Change -+ * flag */ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); -+ dwc_otg_hcd->flags.b.port_reset_change = 0; -+ break; -+ case UHF_C_PORT_ENABLE: -+ /* Clears the driver's internal Port -+ * Enable/Disable Change flag */ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); -+ dwc_otg_hcd->flags.b.port_enable_change = 0; -+ break; -+ case UHF_C_PORT_SUSPEND: -+ /* Clears the driver's internal Port Suspend -+ * Change flag, which is set when resume signaling on -+ * the host port is complete */ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); -+ dwc_otg_hcd->flags.b.port_suspend_change = 0; -+ break; -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ case UHF_C_PORT_L1: -+ dwc_otg_hcd->flags.b.port_l1_change = 0; -+ break; -+#endif -+ case UHF_C_PORT_OVER_CURRENT: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); -+ dwc_otg_hcd->flags.b.port_over_current_change = 0; -+ break; -+ default: -+ retval = -DWC_E_INVALID; -+ DWC_ERROR("DWC OTG HCD - " -+ "ClearPortFeature request %xh " -+ "unknown or unsupported\n", wValue); -+ } -+ break; -+ case UCR_GET_HUB_DESCRIPTOR: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "GetHubDescriptor\n"); -+ hub_desc = (usb_hub_descriptor_t *) buf; -+ hub_desc->bDescLength = 9; -+ hub_desc->bDescriptorType = 0x29; -+ hub_desc->bNbrPorts = 1; -+ USETW(hub_desc->wHubCharacteristics, 0x08); -+ hub_desc->bPwrOn2PwrGood = 1; -+ hub_desc->bHubContrCurrent = 0; -+ hub_desc->DeviceRemovable[0] = 0; -+ hub_desc->DeviceRemovable[1] = 0xff; -+ break; -+ case UCR_GET_HUB_STATUS: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "GetHubStatus\n"); -+ DWC_MEMSET(buf, 0, 4); -+ break; -+ case UCR_GET_PORT_STATUS: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "GetPortStatus wIndex = 0x%04x FLAGS=0x%08x\n", -+ wIndex, dwc_otg_hcd->flags.d32); -+ if (!wIndex || wIndex > 1) -+ goto error; -+ -+ port_status = 0; -+ -+ if (dwc_otg_hcd->flags.b.port_connect_status_change) -+ port_status |= (1 << UHF_C_PORT_CONNECTION); -+ -+ if (dwc_otg_hcd->flags.b.port_enable_change) -+ port_status |= (1 << UHF_C_PORT_ENABLE); -+ -+ if (dwc_otg_hcd->flags.b.port_suspend_change) -+ port_status |= (1 << UHF_C_PORT_SUSPEND); -+ -+ if (dwc_otg_hcd->flags.b.port_l1_change) -+ port_status |= (1 << UHF_C_PORT_L1); -+ -+ if (dwc_otg_hcd->flags.b.port_reset_change) { -+ port_status |= (1 << UHF_C_PORT_RESET); -+ } -+ -+ if (dwc_otg_hcd->flags.b.port_over_current_change) { -+ DWC_WARN("Overcurrent change detected\n"); -+ port_status |= (1 << UHF_C_PORT_OVER_CURRENT); -+ } -+ -+ if (!dwc_otg_hcd->flags.b.port_connect_status) { -+ /* -+ * The port is disconnected, which means the core is -+ * either in device mode or it soon will be. Just -+ * return 0's for the remainder of the port status -+ * since the port register can't be read if the core -+ * is in device mode. -+ */ -+ *((__le32 *) buf) = dwc_cpu_to_le32(&port_status); -+ break; -+ } -+ -+ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); -+ DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32); -+ -+ if (hprt0.b.prtconnsts) -+ port_status |= (1 << UHF_PORT_CONNECTION); -+ -+ if (hprt0.b.prtena) -+ port_status |= (1 << UHF_PORT_ENABLE); -+ -+ if (hprt0.b.prtsusp) -+ port_status |= (1 << UHF_PORT_SUSPEND); -+ -+ if (hprt0.b.prtovrcurract) -+ port_status |= (1 << UHF_PORT_OVER_CURRENT); -+ -+ if (hprt0.b.prtrst) -+ port_status |= (1 << UHF_PORT_RESET); -+ -+ if (hprt0.b.prtpwr) -+ port_status |= (1 << UHF_PORT_POWER); -+ -+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) -+ port_status |= (1 << UHF_PORT_HIGH_SPEED); -+ else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) -+ port_status |= (1 << UHF_PORT_LOW_SPEED); -+ -+ if (hprt0.b.prttstctl) -+ port_status |= (1 << UHF_PORT_TEST); -+ if (dwc_otg_get_lpm_portsleepstatus(dwc_otg_hcd->core_if)) { -+ port_status |= (1 << UHF_PORT_L1); -+ } -+ /* -+ For Synopsys HW emulation of Power down wkup_control asserts the -+ hreset_n and prst_n on suspned. This causes the HPRT0 to be zero. -+ We intentionally tell the software that port is in L2Suspend state. -+ Only for STE. -+ */ -+ if ((core_if->power_down == 2) -+ && (core_if->hibernation_suspend == 1)) { -+ port_status |= (1 << UHF_PORT_SUSPEND); -+ } -+ /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ -+ -+ *((__le32 *) buf) = dwc_cpu_to_le32(&port_status); -+ -+ break; -+ case UCR_SET_HUB_FEATURE: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "SetHubFeature\n"); -+ /* No HUB features supported */ -+ break; -+ case UCR_SET_PORT_FEATURE: -+ if (wValue != UHF_PORT_TEST && (!wIndex || wIndex > 1)) -+ goto error; -+ -+ if (!dwc_otg_hcd->flags.b.port_connect_status) { -+ /* -+ * The port is disconnected, which means the core is -+ * either in device mode or it soon will be. Just -+ * return without doing anything since the port -+ * register can't be written if the core is in device -+ * mode. -+ */ -+ break; -+ } -+ -+ switch (wValue) { -+ case UHF_PORT_SUSPEND: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); -+ if (dwc_otg_hcd_otg_port(dwc_otg_hcd) != wIndex) { -+ goto error; -+ } -+ if (core_if->power_down == 2) { -+ int timeout = 300; -+ dwc_irqflags_t flags; -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ gusbcfg_data_t gusbcfg = {.d32 = 0 }; -+#ifdef DWC_DEV_SRPCAP -+ int32_t otg_cap_param = core_if->core_params->otg_cap; -+#endif -+ DWC_PRINTF("Preparing for complete power-off\n"); -+ -+ /* Save registers before hibernation */ -+ dwc_otg_save_global_regs(core_if); -+ dwc_otg_save_host_regs(core_if); -+ -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtsusp = 1; -+ hprt0.b.prtena = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ /* Spin hprt0.b.prtsusp to became 1 */ -+ do { -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ if (hprt0.b.prtsusp) { -+ break; -+ } -+ dwc_mdelay(1); -+ } while (--timeout); -+ if (!timeout) { -+ DWC_WARN("Suspend wasn't genereted\n"); -+ } -+ dwc_udelay(10); -+ -+ /* -+ * We need to disable interrupts to prevent servicing of any IRQ -+ * during going to hibernation -+ */ -+ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); -+ core_if->lx_state = DWC_OTG_L2; -+#ifdef DWC_DEV_SRPCAP -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtpwr = 0; -+ hprt0.b.prtena = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, -+ hprt0.d32); -+#endif -+ gusbcfg.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs-> -+ gusbcfg); -+ if (gusbcfg.b.ulpi_utmi_sel == 1) { -+ /* ULPI interface */ -+ /* Suspend the Phy Clock */ -+ pcgcctl.d32 = 0; -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, -+ pcgcctl.d32); -+ dwc_udelay(10); -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ } else { -+ /* UTMI+ Interface */ -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); -+ dwc_udelay(10); -+ } -+#ifdef DWC_DEV_SRPCAP -+ gpwrdn.d32 = 0; -+ gpwrdn.b.dis_vbus = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+#endif -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ gpwrdn.d32 = 0; -+#ifdef DWC_DEV_SRPCAP -+ gpwrdn.b.srp_det_msk = 1; -+#endif -+ gpwrdn.b.disconn_det_msk = 1; -+ gpwrdn.b.lnstchng_msk = 1; -+ gpwrdn.b.sts_chngint_msk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Enable Power Down Clamp and all interrupts in GPWRDN */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Switch off VDD */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ -+#ifdef DWC_DEV_SRPCAP -+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) -+ { -+ core_if->pwron_timer_started = 1; -+ DWC_TIMER_SCHEDULE(core_if->pwron_timer, 6000 /* 6 secs */ ); -+ } -+#endif -+ /* Save gpwrdn register for further usage if stschng interrupt */ -+ core_if->gr_backup->gpwrdn_local = -+ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ -+ /* Set flag to indicate that we are in hibernation */ -+ core_if->hibernation_suspend = 1; -+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock,flags); -+ -+ DWC_PRINTF("Host hibernation completed\n"); -+ // Exit from case statement -+ break; -+ -+ } -+ if (dwc_otg_hcd_otg_port(dwc_otg_hcd) == wIndex && -+ dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) { -+ gotgctl_data_t gotgctl = {.d32 = 0 }; -+ gotgctl.b.hstsethnpen = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gotgctl, 0, gotgctl.d32); -+ core_if->op_state = A_SUSPEND; -+ } -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtsusp = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ { -+ dwc_irqflags_t flags; -+ /* Update lx_state */ -+ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); -+ core_if->lx_state = DWC_OTG_L2; -+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); -+ } -+ /* Suspend the Phy Clock */ -+ { -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, -+ pcgcctl.d32); -+ dwc_udelay(10); -+ } -+ -+ /* For HNP the bus must be suspended for at least 200ms. */ -+ if (dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) { -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); -+ dwc_mdelay(200); -+ } -+ -+ /** @todo - check how sw can wait for 1 sec to check asesvld??? */ -+#if 0 //vahrama !!!!!!!!!!!!!!!!!! -+ if (core_if->adp_enable) { -+ gotgctl_data_t gotgctl = {.d32 = 0 }; -+ gpwrdn_data_t gpwrdn; -+ -+ while (gotgctl.b.asesvld == 1) { -+ gotgctl.d32 = -+ DWC_READ_REG32(&core_if-> -+ core_global_regs-> -+ gotgctl); -+ dwc_mdelay(100); -+ } -+ -+ /* Enable Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ -+ /* Unmask SRP detected interrupt from Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.srp_det_msk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ -+ dwc_otg_adp_probe_start(core_if); -+ } -+#endif -+ break; -+ case UHF_PORT_POWER: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "SetPortFeature - USB_PORT_FEAT_POWER\n"); -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtpwr = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ break; -+ case UHF_PORT_RESET: -+ if ((core_if->power_down == 2) -+ && (core_if->hibernation_suspend == 1)) { -+ /* If we are going to exit from Hibernated -+ * state via USB RESET. -+ */ -+ dwc_otg_host_hibernation_restore(core_if, 0, 1); -+ } else { -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ -+ DWC_DEBUGPL(DBG_HCD, -+ "DWC OTG HCD HUB CONTROL - " -+ "SetPortFeature - USB_PORT_FEAT_RESET\n"); -+ { -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ pcgcctl.b.enbl_sleep_gating = 1; -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); -+ DWC_WRITE_REG32(core_if->pcgcctl, 0); -+ } -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ { -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ if (lpmcfg.b.prt_sleep_sts) { -+ lpmcfg.b.en_utmi_sleep = 0; -+ lpmcfg.b.hird_thres &= (~(1 << 4)); -+ DWC_WRITE_REG32 -+ (&core_if->core_global_regs->glpmcfg, -+ lpmcfg.d32); -+ dwc_mdelay(1); -+ } -+ } -+#endif -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ /* Clear suspend bit if resetting from suspended state. */ -+ hprt0.b.prtsusp = 0; -+ /* When B-Host the Port reset bit is set in -+ * the Start HCD Callback function, so that -+ * the reset is started within 1ms of the HNP -+ * success interrupt. */ -+ if (!dwc_otg_hcd_is_b_host(dwc_otg_hcd)) { -+ hprt0.b.prtpwr = 1; -+ hprt0.b.prtrst = 1; -+ DWC_PRINTF("Indeed it is in host mode hprt0 = %08x\n",hprt0.d32); -+ DWC_WRITE_REG32(core_if->host_if->hprt0, -+ hprt0.d32); -+ } -+ /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ -+ dwc_mdelay(60); -+ hprt0.b.prtrst = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ core_if->lx_state = DWC_OTG_L0; /* Now back to the on state */ -+ } -+ break; -+#ifdef DWC_HS_ELECT_TST -+ case UHF_PORT_TEST: -+ { -+ uint32_t t; -+ gintmsk_data_t gintmsk; -+ -+ t = (wIndex >> 8); /* MSB wIndex USB */ -+ DWC_DEBUGPL(DBG_HCD, -+ "DWC OTG HCD HUB CONTROL - " -+ "SetPortFeature - USB_PORT_FEAT_TEST %d\n", -+ t); -+ DWC_WARN("USB_PORT_FEAT_TEST %d\n", t); -+ if (t < 6) { -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prttstctl = t; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, -+ hprt0.d32); -+ } else { -+ /* Setup global vars with reg addresses (quick and -+ * dirty hack, should be cleaned up) -+ */ -+ global_regs = core_if->core_global_regs; -+ hc_global_regs = -+ core_if->host_if->host_global_regs; -+ hc_regs = -+ (dwc_otg_hc_regs_t *) ((char *) -+ global_regs + -+ 0x500); -+ data_fifo = -+ (uint32_t *) ((char *)global_regs + -+ 0x1000); -+ -+ if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */ -+ /* Save current interrupt mask */ -+ gintmsk.d32 = -+ DWC_READ_REG32 -+ (&global_regs->gintmsk); -+ -+ /* Disable all interrupts while we muck with -+ * the hardware directly -+ */ -+ DWC_WRITE_REG32(&global_regs->gintmsk, 0); -+ -+ /* 15 second delay per the test spec */ -+ dwc_mdelay(15000); -+ -+ /* Drive suspend on the root port */ -+ hprt0.d32 = -+ dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtsusp = 1; -+ hprt0.b.prtres = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ -+ /* 15 second delay per the test spec */ -+ dwc_mdelay(15000); -+ -+ /* Drive resume on the root port */ -+ hprt0.d32 = -+ dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtsusp = 0; -+ hprt0.b.prtres = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ dwc_mdelay(100); -+ -+ /* Clear the resume bit */ -+ hprt0.b.prtres = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ -+ /* Restore interrupts */ -+ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32); -+ } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ -+ /* Save current interrupt mask */ -+ gintmsk.d32 = -+ DWC_READ_REG32 -+ (&global_regs->gintmsk); -+ -+ /* Disable all interrupts while we muck with -+ * the hardware directly -+ */ -+ DWC_WRITE_REG32(&global_regs->gintmsk, 0); -+ -+ /* 15 second delay per the test spec */ -+ dwc_mdelay(15000); -+ -+ /* Send the Setup packet */ -+ do_setup(); -+ -+ /* 15 second delay so nothing else happens for awhile */ -+ dwc_mdelay(15000); -+ -+ /* Restore interrupts */ -+ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32); -+ } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ -+ /* Save current interrupt mask */ -+ gintmsk.d32 = -+ DWC_READ_REG32 -+ (&global_regs->gintmsk); -+ -+ /* Disable all interrupts while we muck with -+ * the hardware directly -+ */ -+ DWC_WRITE_REG32(&global_regs->gintmsk, 0); -+ -+ /* Send the Setup packet */ -+ do_setup(); -+ -+ /* 15 second delay so nothing else happens for awhile */ -+ dwc_mdelay(15000); -+ -+ /* Send the In and Ack packets */ -+ do_in_ack(); -+ -+ /* 15 second delay so nothing else happens for awhile */ -+ dwc_mdelay(15000); -+ -+ /* Restore interrupts */ -+ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32); -+ } -+ } -+ break; -+ } -+#endif /* DWC_HS_ELECT_TST */ -+ -+ case UHF_PORT_INDICATOR: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); -+ /* Not supported */ -+ break; -+ default: -+ retval = -DWC_E_INVALID; -+ DWC_ERROR("DWC OTG HCD - " -+ "SetPortFeature request %xh " -+ "unknown or unsupported\n", wValue); -+ break; -+ } -+ break; -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ case UCR_SET_AND_TEST_PORT_FEATURE: -+ if (wValue != UHF_PORT_L1) { -+ goto error; -+ } -+ { -+ int portnum, hird, devaddr, remwake; -+ glpmcfg_data_t lpmcfg; -+ uint32_t time_usecs; -+ gintsts_data_t gintsts; -+ gintmsk_data_t gintmsk; -+ -+ if (!dwc_otg_get_param_lpm_enable(core_if)) { -+ goto error; -+ } -+ if (wValue != UHF_PORT_L1 || wLength != 1) { -+ goto error; -+ } -+ /* Check if the port currently is in SLEEP state */ -+ lpmcfg.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ if (lpmcfg.b.prt_sleep_sts) { -+ DWC_INFO("Port is already in sleep mode\n"); -+ buf[0] = 0; /* Return success */ -+ break; -+ } -+ -+ portnum = wIndex & 0xf; -+ hird = (wIndex >> 4) & 0xf; -+ devaddr = (wIndex >> 8) & 0x7f; -+ remwake = (wIndex >> 15); -+ -+ if (portnum != 1) { -+ retval = -DWC_E_INVALID; -+ DWC_WARN -+ ("Wrong port number(%d) in SetandTestPortFeature request\n", -+ portnum); -+ break; -+ } -+ -+ DWC_PRINTF -+ ("SetandTestPortFeature request: portnum = %d, hird = %d, devaddr = %d, rewake = %d\n", -+ portnum, hird, devaddr, remwake); -+ /* Disable LPM interrupt */ -+ gintmsk.d32 = 0; -+ gintmsk.b.lpmtranrcvd = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, -+ gintmsk.d32, 0); -+ -+ if (dwc_otg_hcd_send_lpm -+ (dwc_otg_hcd, devaddr, hird, remwake)) { -+ retval = -DWC_E_INVALID; -+ break; -+ } -+ -+ time_usecs = 10 * (lpmcfg.b.retry_count + 1); -+ /* We will consider timeout if time_usecs microseconds pass, -+ * and we don't receive LPM transaction status. -+ * After receiving non-error responce(ACK/NYET/STALL) from device, -+ * core will set lpmtranrcvd bit. -+ */ -+ do { -+ gintsts.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ if (gintsts.b.lpmtranrcvd) { -+ break; -+ } -+ dwc_udelay(1); -+ } while (--time_usecs); -+ /* lpm_int bit will be cleared in LPM interrupt handler */ -+ -+ /* Now fill status -+ * 0x00 - Success -+ * 0x10 - NYET -+ * 0x11 - Timeout -+ */ -+ if (!gintsts.b.lpmtranrcvd) { -+ buf[0] = 0x3; /* Completion code is Timeout */ -+ dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd); -+ } else { -+ lpmcfg.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ if (lpmcfg.b.lpm_resp == 0x3) { -+ /* ACK responce from the device */ -+ buf[0] = 0x00; /* Success */ -+ } else if (lpmcfg.b.lpm_resp == 0x2) { -+ /* NYET responce from the device */ -+ buf[0] = 0x2; -+ } else { -+ /* Otherwise responce with Timeout */ -+ buf[0] = 0x3; -+ } -+ } -+ DWC_PRINTF("Device responce to LPM trans is %x\n", -+ lpmcfg.b.lpm_resp); -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, -+ gintmsk.d32); -+ -+ break; -+ } -+#endif /* CONFIG_USB_DWC_OTG_LPM */ -+ default: -+error: -+ retval = -DWC_E_INVALID; -+ DWC_WARN("DWC OTG HCD - " -+ "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n", -+ typeReq, wIndex, wValue); -+ break; -+ } -+ -+ return retval; -+} -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+/** Returns index of host channel to perform LPM transaction. */ -+int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd, uint8_t devaddr) -+{ -+ dwc_otg_core_if_t *core_if = hcd->core_if; -+ dwc_hc_t *hc; -+ hcchar_data_t hcchar; -+ gintmsk_data_t gintmsk = {.d32 = 0 }; -+ -+ if (DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { -+ DWC_PRINTF("No free channel to select for LPM transaction\n"); -+ return -1; -+ } -+ -+ hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list); -+ -+ /* Mask host channel interrupts. */ -+ gintmsk.b.hcintr = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0); -+ -+ /* Fill fields that core needs for LPM transaction */ -+ hcchar.b.devaddr = devaddr; -+ hcchar.b.epnum = 0; -+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; -+ hcchar.b.mps = 64; -+ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW); -+ hcchar.b.epdir = 0; /* OUT */ -+ DWC_WRITE_REG32(&core_if->host_if->hc_regs[hc->hc_num]->hcchar, -+ hcchar.d32); -+ -+ /* Remove the host channel from the free list. */ -+ DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry); -+ -+ DWC_PRINTF("hcnum = %d devaddr = %d\n", hc->hc_num, devaddr); -+ -+ return hc->hc_num; -+} -+ -+/** Release hc after performing LPM transaction */ -+void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd) -+{ -+ dwc_hc_t *hc; -+ glpmcfg_data_t lpmcfg; -+ uint8_t hc_num; -+ -+ lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg); -+ hc_num = lpmcfg.b.lpm_chan_index; -+ -+ hc = hcd->hc_ptr_array[hc_num]; -+ -+ DWC_PRINTF("Freeing channel %d after LPM\n", hc_num); -+ /* Return host channel to free list */ -+ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); -+} -+ -+int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr, uint8_t hird, -+ uint8_t bRemoteWake) -+{ -+ glpmcfg_data_t lpmcfg; -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ int channel; -+ -+ channel = dwc_otg_hcd_get_hc_for_lpm_tran(hcd, devaddr); -+ if (channel < 0) { -+ return channel; -+ } -+ -+ pcgcctl.b.enbl_sleep_gating = 1; -+ DWC_MODIFY_REG32(hcd->core_if->pcgcctl, 0, pcgcctl.d32); -+ -+ /* Read LPM config register */ -+ lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg); -+ -+ /* Program LPM transaction fields */ -+ lpmcfg.b.rem_wkup_en = bRemoteWake; -+ lpmcfg.b.hird = hird; -+ lpmcfg.b.hird_thres = 0x1c; -+ lpmcfg.b.lpm_chan_index = channel; -+ lpmcfg.b.en_utmi_sleep = 1; -+ /* Program LPM config register */ -+ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32); -+ -+ /* Send LPM transaction */ -+ lpmcfg.b.send_lpm = 1; -+ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32); -+ -+ return 0; -+} -+ -+#endif /* CONFIG_USB_DWC_OTG_LPM */ -+ -+int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port) -+{ -+ int retval; -+ -+ if (port != 1) { -+ return -DWC_E_INVALID; -+ } -+ -+ retval = (hcd->flags.b.port_connect_status_change || -+ hcd->flags.b.port_reset_change || -+ hcd->flags.b.port_enable_change || -+ hcd->flags.b.port_suspend_change || -+ hcd->flags.b.port_over_current_change); -+#ifdef DEBUG -+ if (retval) { -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:" -+ " Root port status changed\n"); -+ DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n", -+ hcd->flags.b.port_connect_status_change); -+ DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n", -+ hcd->flags.b.port_reset_change); -+ DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n", -+ hcd->flags.b.port_enable_change); -+ DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n", -+ hcd->flags.b.port_suspend_change); -+ DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n", -+ hcd->flags.b.port_over_current_change); -+ } -+#endif -+ return retval; -+} -+ -+int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ hfnum_data_t hfnum; -+ hfnum.d32 = -+ DWC_READ_REG32(&dwc_otg_hcd->core_if->host_if->host_global_regs-> -+ hfnum); -+ -+#ifdef DEBUG_SOF -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", -+ hfnum.b.frnum); -+#endif -+ return hfnum.b.frnum; -+} -+ -+int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd, -+ struct dwc_otg_hcd_function_ops *fops) -+{ -+ int retval = 0; -+ -+ hcd->fops = fops; -+ if (!dwc_otg_is_device_mode(hcd->core_if) && -+ (!hcd->core_if->adp_enable || hcd->core_if->adp.adp_started)) { -+ dwc_otg_hcd_reinit(hcd); -+ } else { -+ retval = -DWC_E_NO_DEVICE; -+ } -+ -+ return retval; -+} -+ -+void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd) -+{ -+ return hcd->priv; -+} -+ -+void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data) -+{ -+ hcd->priv = priv_data; -+} -+ -+uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd) -+{ -+ return hcd->otg_port; -+} -+ -+uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd) -+{ -+ uint32_t is_b_host; -+ if (hcd->core_if->op_state == B_HOST) { -+ is_b_host = 1; -+ } else { -+ is_b_host = 0; -+ } -+ -+ return is_b_host; -+} -+ -+dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd, -+ int iso_desc_count, int atomic_alloc) -+{ -+ dwc_otg_hcd_urb_t *dwc_otg_urb; -+ uint32_t size; -+ -+ size = -+ sizeof(*dwc_otg_urb) + -+ iso_desc_count * sizeof(struct dwc_otg_hcd_iso_packet_desc); -+ if (atomic_alloc) -+ dwc_otg_urb = DWC_ALLOC_ATOMIC(size); -+ else -+ dwc_otg_urb = DWC_ALLOC(size); -+ -+ if (dwc_otg_urb) -+ dwc_otg_urb->packet_count = iso_desc_count; -+ else { -+ DWC_ERROR("**** DWC OTG HCD URB alloc - " -+ "%salloc of %db failed\n", -+ atomic_alloc?"atomic ":"", size); -+ } -+ return dwc_otg_urb; -+} -+ -+void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * dwc_otg_urb, -+ uint8_t dev_addr, uint8_t ep_num, -+ uint8_t ep_type, uint8_t ep_dir, uint16_t mps) -+{ -+ dwc_otg_hcd_fill_pipe(&dwc_otg_urb->pipe_info, dev_addr, ep_num, -+ ep_type, ep_dir, mps); -+#if 0 -+ DWC_PRINTF -+ ("addr = %d, ep_num = %d, ep_dir = 0x%x, ep_type = 0x%x, mps = %d\n", -+ dev_addr, ep_num, ep_dir, ep_type, mps); -+#endif -+} -+ -+void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * dwc_otg_urb, -+ void *urb_handle, void *buf, dwc_dma_t dma, -+ uint32_t buflen, void *setup_packet, -+ dwc_dma_t setup_dma, uint32_t flags, -+ uint16_t interval) -+{ -+ dwc_otg_urb->priv = urb_handle; -+ dwc_otg_urb->buf = buf; -+ dwc_otg_urb->dma = dma; -+ dwc_otg_urb->length = buflen; -+ dwc_otg_urb->setup_packet = setup_packet; -+ dwc_otg_urb->setup_dma = setup_dma; -+ dwc_otg_urb->flags = flags; -+ dwc_otg_urb->interval = interval; -+ dwc_otg_urb->status = -DWC_E_IN_PROGRESS; -+} -+ -+uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb) -+{ -+ return dwc_otg_urb->status; -+} -+ -+uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t * dwc_otg_urb) -+{ -+ return dwc_otg_urb->actual_length; -+} -+ -+uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t * dwc_otg_urb) -+{ -+ return dwc_otg_urb->error_count; -+} -+ -+void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb, -+ int desc_num, uint32_t offset, -+ uint32_t length) -+{ -+ dwc_otg_urb->iso_descs[desc_num].offset = offset; -+ dwc_otg_urb->iso_descs[desc_num].length = length; -+} -+ -+uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t * dwc_otg_urb, -+ int desc_num) -+{ -+ return dwc_otg_urb->iso_descs[desc_num].status; -+} -+ -+uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t * -+ dwc_otg_urb, int desc_num) -+{ -+ return dwc_otg_urb->iso_descs[desc_num].actual_length; -+} -+ -+int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd, void *ep_handle) -+{ -+ int allocated = 0; -+ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; -+ -+ if (qh) { -+ if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) { -+ allocated = 1; -+ } -+ } -+ return allocated; -+} -+ -+int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle) -+{ -+ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; -+ int freed = 0; -+ DWC_ASSERT(qh, "qh is not allocated\n"); -+ -+ if (DWC_LIST_EMPTY(&qh->qh_list_entry)) { -+ freed = 1; -+ } -+ -+ return freed; -+} -+ -+uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd, void *ep_handle) -+{ -+ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; -+ DWC_ASSERT(qh, "qh is not allocated\n"); -+ return qh->usecs; -+} -+ -+void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd) -+{ -+#ifdef DEBUG -+ int num_channels; -+ int i; -+ gnptxsts_data_t np_tx_status; -+ hptxsts_data_t p_tx_status; -+ -+ num_channels = hcd->core_if->core_params->host_channels; -+ DWC_PRINTF("\n"); -+ DWC_PRINTF -+ ("************************************************************\n"); -+ DWC_PRINTF("HCD State:\n"); -+ DWC_PRINTF(" Num channels: %d\n", num_channels); -+ for (i = 0; i < num_channels; i++) { -+ dwc_hc_t *hc = hcd->hc_ptr_array[i]; -+ DWC_PRINTF(" Channel %d:\n", i); -+ DWC_PRINTF(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", -+ hc->dev_addr, hc->ep_num, hc->ep_is_in); -+ DWC_PRINTF(" speed: %d\n", hc->speed); -+ DWC_PRINTF(" ep_type: %d\n", hc->ep_type); -+ DWC_PRINTF(" max_packet: %d\n", hc->max_packet); -+ DWC_PRINTF(" data_pid_start: %d\n", hc->data_pid_start); -+ DWC_PRINTF(" multi_count: %d\n", hc->multi_count); -+ DWC_PRINTF(" xfer_started: %d\n", hc->xfer_started); -+ DWC_PRINTF(" xfer_buff: %p\n", hc->xfer_buff); -+ DWC_PRINTF(" xfer_len: %d\n", hc->xfer_len); -+ DWC_PRINTF(" xfer_count: %d\n", hc->xfer_count); -+ DWC_PRINTF(" halt_on_queue: %d\n", hc->halt_on_queue); -+ DWC_PRINTF(" halt_pending: %d\n", hc->halt_pending); -+ DWC_PRINTF(" halt_status: %d\n", hc->halt_status); -+ DWC_PRINTF(" do_split: %d\n", hc->do_split); -+ DWC_PRINTF(" complete_split: %d\n", hc->complete_split); -+ DWC_PRINTF(" hub_addr: %d\n", hc->hub_addr); -+ DWC_PRINTF(" port_addr: %d\n", hc->port_addr); -+ DWC_PRINTF(" xact_pos: %d\n", hc->xact_pos); -+ DWC_PRINTF(" requests: %d\n", hc->requests); -+ DWC_PRINTF(" qh: %p\n", hc->qh); -+ if (hc->xfer_started) { -+ hfnum_data_t hfnum; -+ hcchar_data_t hcchar; -+ hctsiz_data_t hctsiz; -+ hcint_data_t hcint; -+ hcintmsk_data_t hcintmsk; -+ hfnum.d32 = -+ DWC_READ_REG32(&hcd->core_if-> -+ host_if->host_global_regs->hfnum); -+ hcchar.d32 = -+ DWC_READ_REG32(&hcd->core_if->host_if-> -+ hc_regs[i]->hcchar); -+ hctsiz.d32 = -+ DWC_READ_REG32(&hcd->core_if->host_if-> -+ hc_regs[i]->hctsiz); -+ hcint.d32 = -+ DWC_READ_REG32(&hcd->core_if->host_if-> -+ hc_regs[i]->hcint); -+ hcintmsk.d32 = -+ DWC_READ_REG32(&hcd->core_if->host_if-> -+ hc_regs[i]->hcintmsk); -+ DWC_PRINTF(" hfnum: 0x%08x\n", hfnum.d32); -+ DWC_PRINTF(" hcchar: 0x%08x\n", hcchar.d32); -+ DWC_PRINTF(" hctsiz: 0x%08x\n", hctsiz.d32); -+ DWC_PRINTF(" hcint: 0x%08x\n", hcint.d32); -+ DWC_PRINTF(" hcintmsk: 0x%08x\n", hcintmsk.d32); -+ } -+ if (hc->xfer_started && hc->qh) { -+ dwc_otg_qtd_t *qtd; -+ dwc_otg_hcd_urb_t *urb; -+ -+ DWC_CIRCLEQ_FOREACH(qtd, &hc->qh->qtd_list, qtd_list_entry) { -+ if (!qtd->in_process) -+ break; -+ -+ urb = qtd->urb; -+ DWC_PRINTF(" URB Info:\n"); -+ DWC_PRINTF(" qtd: %p, urb: %p\n", qtd, urb); -+ if (urb) { -+ DWC_PRINTF(" Dev: %d, EP: %d %s\n", -+ dwc_otg_hcd_get_dev_addr(&urb-> -+ pipe_info), -+ dwc_otg_hcd_get_ep_num(&urb-> -+ pipe_info), -+ dwc_otg_hcd_is_pipe_in(&urb-> -+ pipe_info) ? -+ "IN" : "OUT"); -+ DWC_PRINTF(" Max packet size: %d\n", -+ dwc_otg_hcd_get_mps(&urb-> -+ pipe_info)); -+ DWC_PRINTF(" transfer_buffer: %p\n", -+ urb->buf); -+ DWC_PRINTF(" transfer_dma: %p\n", -+ (void *)urb->dma); -+ DWC_PRINTF(" transfer_buffer_length: %d\n", -+ urb->length); -+ DWC_PRINTF(" actual_length: %d\n", -+ urb->actual_length); -+ } -+ } -+ } -+ } -+ DWC_PRINTF(" non_periodic_channels: %d\n", hcd->non_periodic_channels); -+ DWC_PRINTF(" periodic_channels: %d\n", hcd->periodic_channels); -+ DWC_PRINTF(" periodic_usecs: %d\n", hcd->periodic_usecs); -+ np_tx_status.d32 = -+ DWC_READ_REG32(&hcd->core_if->core_global_regs->gnptxsts); -+ DWC_PRINTF(" NP Tx Req Queue Space Avail: %d\n", -+ np_tx_status.b.nptxqspcavail); -+ DWC_PRINTF(" NP Tx FIFO Space Avail: %d\n", -+ np_tx_status.b.nptxfspcavail); -+ p_tx_status.d32 = -+ DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hptxsts); -+ DWC_PRINTF(" P Tx Req Queue Space Avail: %d\n", -+ p_tx_status.b.ptxqspcavail); -+ DWC_PRINTF(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail); -+ dwc_otg_hcd_dump_frrem(hcd); -+ dwc_otg_dump_global_registers(hcd->core_if); -+ dwc_otg_dump_host_registers(hcd->core_if); -+ DWC_PRINTF -+ ("************************************************************\n"); -+ DWC_PRINTF("\n"); -+#endif -+} -+ -+#ifdef DEBUG -+void dwc_print_setup_data(uint8_t * setup) -+{ -+ int i; -+ if (CHK_DEBUG_LEVEL(DBG_HCD)) { -+ DWC_PRINTF("Setup Data = MSB "); -+ for (i = 7; i >= 0; i--) -+ DWC_PRINTF("%02x ", setup[i]); -+ DWC_PRINTF("\n"); -+ DWC_PRINTF(" bmRequestType Tranfer = %s\n", -+ (setup[0] & 0x80) ? "Device-to-Host" : -+ "Host-to-Device"); -+ DWC_PRINTF(" bmRequestType Type = "); -+ switch ((setup[0] & 0x60) >> 5) { -+ case 0: -+ DWC_PRINTF("Standard\n"); -+ break; -+ case 1: -+ DWC_PRINTF("Class\n"); -+ break; -+ case 2: -+ DWC_PRINTF("Vendor\n"); -+ break; -+ case 3: -+ DWC_PRINTF("Reserved\n"); -+ break; -+ } -+ DWC_PRINTF(" bmRequestType Recipient = "); -+ switch (setup[0] & 0x1f) { -+ case 0: -+ DWC_PRINTF("Device\n"); -+ break; -+ case 1: -+ DWC_PRINTF("Interface\n"); -+ break; -+ case 2: -+ DWC_PRINTF("Endpoint\n"); -+ break; -+ case 3: -+ DWC_PRINTF("Other\n"); -+ break; -+ default: -+ DWC_PRINTF("Reserved\n"); -+ break; -+ } -+ DWC_PRINTF(" bRequest = 0x%0x\n", setup[1]); -+ DWC_PRINTF(" wValue = 0x%0x\n", *((uint16_t *) & setup[2])); -+ DWC_PRINTF(" wIndex = 0x%0x\n", *((uint16_t *) & setup[4])); -+ DWC_PRINTF(" wLength = 0x%0x\n\n", *((uint16_t *) & setup[6])); -+ } -+} -+#endif -+ -+void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd) -+{ -+#if 0 -+ DWC_PRINTF("Frame remaining at SOF:\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->frrem_samples, hcd->frrem_accum, -+ (hcd->frrem_samples > 0) ? -+ hcd->frrem_accum / hcd->frrem_samples : 0); -+ -+ DWC_PRINTF("\n"); -+ DWC_PRINTF("Frame remaining at start_transfer (uframe 7):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->core_if->hfnum_7_samples, -+ hcd->core_if->hfnum_7_frrem_accum, -+ (hcd->core_if->hfnum_7_samples > -+ 0) ? hcd->core_if->hfnum_7_frrem_accum / -+ hcd->core_if->hfnum_7_samples : 0); -+ DWC_PRINTF("Frame remaining at start_transfer (uframe 0):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->core_if->hfnum_0_samples, -+ hcd->core_if->hfnum_0_frrem_accum, -+ (hcd->core_if->hfnum_0_samples > -+ 0) ? hcd->core_if->hfnum_0_frrem_accum / -+ hcd->core_if->hfnum_0_samples : 0); -+ DWC_PRINTF("Frame remaining at start_transfer (uframe 1-6):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->core_if->hfnum_other_samples, -+ hcd->core_if->hfnum_other_frrem_accum, -+ (hcd->core_if->hfnum_other_samples > -+ 0) ? hcd->core_if->hfnum_other_frrem_accum / -+ hcd->core_if->hfnum_other_samples : 0); -+ -+ DWC_PRINTF("\n"); -+ DWC_PRINTF("Frame remaining at sample point A (uframe 7):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->hfnum_7_samples_a, hcd->hfnum_7_frrem_accum_a, -+ (hcd->hfnum_7_samples_a > 0) ? -+ hcd->hfnum_7_frrem_accum_a / hcd->hfnum_7_samples_a : 0); -+ DWC_PRINTF("Frame remaining at sample point A (uframe 0):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->hfnum_0_samples_a, hcd->hfnum_0_frrem_accum_a, -+ (hcd->hfnum_0_samples_a > 0) ? -+ hcd->hfnum_0_frrem_accum_a / hcd->hfnum_0_samples_a : 0); -+ DWC_PRINTF("Frame remaining at sample point A (uframe 1-6):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->hfnum_other_samples_a, hcd->hfnum_other_frrem_accum_a, -+ (hcd->hfnum_other_samples_a > 0) ? -+ hcd->hfnum_other_frrem_accum_a / -+ hcd->hfnum_other_samples_a : 0); -+ -+ DWC_PRINTF("\n"); -+ DWC_PRINTF("Frame remaining at sample point B (uframe 7):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->hfnum_7_samples_b, hcd->hfnum_7_frrem_accum_b, -+ (hcd->hfnum_7_samples_b > 0) ? -+ hcd->hfnum_7_frrem_accum_b / hcd->hfnum_7_samples_b : 0); -+ DWC_PRINTF("Frame remaining at sample point B (uframe 0):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->hfnum_0_samples_b, hcd->hfnum_0_frrem_accum_b, -+ (hcd->hfnum_0_samples_b > 0) ? -+ hcd->hfnum_0_frrem_accum_b / hcd->hfnum_0_samples_b : 0); -+ DWC_PRINTF("Frame remaining at sample point B (uframe 1-6):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->hfnum_other_samples_b, hcd->hfnum_other_frrem_accum_b, -+ (hcd->hfnum_other_samples_b > 0) ? -+ hcd->hfnum_other_frrem_accum_b / -+ hcd->hfnum_other_samples_b : 0); -+#endif -+} -+ -+#endif /* DWC_DEVICE_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.h -@@ -0,0 +1,868 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $ -+ * $Revision: #58 $ -+ * $Date: 2011/09/15 $ -+ * $Change: 1846647 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_DEVICE_ONLY -+#ifndef __DWC_HCD_H__ -+#define __DWC_HCD_H__ -+ -+#include "dwc_otg_os_dep.h" -+#include "usb.h" -+#include "dwc_otg_hcd_if.h" -+#include "dwc_otg_core_if.h" -+#include "dwc_list.h" -+#include "dwc_otg_cil.h" -+#include "dwc_otg_fiq_fsm.h" -+#include "dwc_otg_driver.h" -+ -+ -+/** -+ * @file -+ * -+ * This file contains the structures, constants, and interfaces for -+ * the Host Contoller Driver (HCD). -+ * -+ * The Host Controller Driver (HCD) is responsible for translating requests -+ * from the USB Driver into the appropriate actions on the DWC_otg controller. -+ * It isolates the USBD from the specifics of the controller by providing an -+ * API to the USBD. -+ */ -+ -+struct dwc_otg_hcd_pipe_info { -+ uint8_t dev_addr; -+ uint8_t ep_num; -+ uint8_t pipe_type; -+ uint8_t pipe_dir; -+ uint16_t mps; -+}; -+ -+struct dwc_otg_hcd_iso_packet_desc { -+ uint32_t offset; -+ uint32_t length; -+ uint32_t actual_length; -+ uint32_t status; -+}; -+ -+struct dwc_otg_qtd; -+ -+struct dwc_otg_hcd_urb { -+ void *priv; -+ struct dwc_otg_qtd *qtd; -+ void *buf; -+ dwc_dma_t dma; -+ void *setup_packet; -+ dwc_dma_t setup_dma; -+ uint32_t length; -+ uint32_t actual_length; -+ uint32_t status; -+ uint32_t error_count; -+ uint32_t packet_count; -+ uint32_t flags; -+ uint16_t interval; -+ struct dwc_otg_hcd_pipe_info pipe_info; -+ struct dwc_otg_hcd_iso_packet_desc iso_descs[0]; -+}; -+ -+static inline uint8_t dwc_otg_hcd_get_ep_num(struct dwc_otg_hcd_pipe_info *pipe) -+{ -+ return pipe->ep_num; -+} -+ -+static inline uint8_t dwc_otg_hcd_get_pipe_type(struct dwc_otg_hcd_pipe_info -+ *pipe) -+{ -+ return pipe->pipe_type; -+} -+ -+static inline uint16_t dwc_otg_hcd_get_mps(struct dwc_otg_hcd_pipe_info *pipe) -+{ -+ return pipe->mps; -+} -+ -+static inline uint8_t dwc_otg_hcd_get_dev_addr(struct dwc_otg_hcd_pipe_info -+ *pipe) -+{ -+ return pipe->dev_addr; -+} -+ -+static inline uint8_t dwc_otg_hcd_is_pipe_isoc(struct dwc_otg_hcd_pipe_info -+ *pipe) -+{ -+ return (pipe->pipe_type == UE_ISOCHRONOUS); -+} -+ -+static inline uint8_t dwc_otg_hcd_is_pipe_int(struct dwc_otg_hcd_pipe_info -+ *pipe) -+{ -+ return (pipe->pipe_type == UE_INTERRUPT); -+} -+ -+static inline uint8_t dwc_otg_hcd_is_pipe_bulk(struct dwc_otg_hcd_pipe_info -+ *pipe) -+{ -+ return (pipe->pipe_type == UE_BULK); -+} -+ -+static inline uint8_t dwc_otg_hcd_is_pipe_control(struct dwc_otg_hcd_pipe_info -+ *pipe) -+{ -+ return (pipe->pipe_type == UE_CONTROL); -+} -+ -+static inline uint8_t dwc_otg_hcd_is_pipe_in(struct dwc_otg_hcd_pipe_info *pipe) -+{ -+ return (pipe->pipe_dir == UE_DIR_IN); -+} -+ -+static inline uint8_t dwc_otg_hcd_is_pipe_out(struct dwc_otg_hcd_pipe_info -+ *pipe) -+{ -+ return (!dwc_otg_hcd_is_pipe_in(pipe)); -+} -+ -+static inline void dwc_otg_hcd_fill_pipe(struct dwc_otg_hcd_pipe_info *pipe, -+ uint8_t devaddr, uint8_t ep_num, -+ uint8_t pipe_type, uint8_t pipe_dir, -+ uint16_t mps) -+{ -+ pipe->dev_addr = devaddr; -+ pipe->ep_num = ep_num; -+ pipe->pipe_type = pipe_type; -+ pipe->pipe_dir = pipe_dir; -+ pipe->mps = mps; -+} -+ -+/** -+ * Phases for control transfers. -+ */ -+typedef enum dwc_otg_control_phase { -+ DWC_OTG_CONTROL_SETUP, -+ DWC_OTG_CONTROL_DATA, -+ DWC_OTG_CONTROL_STATUS -+} dwc_otg_control_phase_e; -+ -+/** Transaction types. */ -+typedef enum dwc_otg_transaction_type { -+ DWC_OTG_TRANSACTION_NONE = 0, -+ DWC_OTG_TRANSACTION_PERIODIC = 1, -+ DWC_OTG_TRANSACTION_NON_PERIODIC = 2, -+ DWC_OTG_TRANSACTION_ALL = DWC_OTG_TRANSACTION_PERIODIC + DWC_OTG_TRANSACTION_NON_PERIODIC -+} dwc_otg_transaction_type_e; -+ -+struct dwc_otg_qh; -+ -+/** -+ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control, -+ * interrupt, or isochronous transfer. A single QTD is created for each URB -+ * (of one of these types) submitted to the HCD. The transfer associated with -+ * a QTD may require one or multiple transactions. -+ * -+ * A QTD is linked to a Queue Head, which is entered in either the -+ * non-periodic or periodic schedule for execution. When a QTD is chosen for -+ * execution, some or all of its transactions may be executed. After -+ * execution, the state of the QTD is updated. The QTD may be retired if all -+ * its transactions are complete or if an error occurred. Otherwise, it -+ * remains in the schedule so more transactions can be executed later. -+ */ -+typedef struct dwc_otg_qtd { -+ /** -+ * Determines the PID of the next data packet for the data phase of -+ * control transfers. Ignored for other transfer types.
-+ * One of the following values: -+ * - DWC_OTG_HC_PID_DATA0 -+ * - DWC_OTG_HC_PID_DATA1 -+ */ -+ uint8_t data_toggle; -+ -+ /** Current phase for control transfers (Setup, Data, or Status). */ -+ dwc_otg_control_phase_e control_phase; -+ -+ /** Keep track of the current split type -+ * for FS/LS endpoints on a HS Hub */ -+ uint8_t complete_split; -+ -+ /** How many bytes transferred during SSPLIT OUT */ -+ uint32_t ssplit_out_xfer_count; -+ -+ /** -+ * Holds the number of bus errors that have occurred for a transaction -+ * within this transfer. -+ */ -+ uint8_t error_count; -+ -+ /** -+ * Index of the next frame descriptor for an isochronous transfer. A -+ * frame descriptor describes the buffer position and length of the -+ * data to be transferred in the next scheduled (micro)frame of an -+ * isochronous transfer. It also holds status for that transaction. -+ * The frame index starts at 0. -+ */ -+ uint16_t isoc_frame_index; -+ -+ /** Position of the ISOC split on full/low speed */ -+ uint8_t isoc_split_pos; -+ -+ /** Position of the ISOC split in the buffer for the current frame */ -+ uint16_t isoc_split_offset; -+ -+ /** URB for this transfer */ -+ struct dwc_otg_hcd_urb *urb; -+ -+ struct dwc_otg_qh *qh; -+ -+ /** This list of QTDs */ -+ DWC_CIRCLEQ_ENTRY(dwc_otg_qtd) qtd_list_entry; -+ -+ /** Indicates if this QTD is currently processed by HW. */ -+ uint8_t in_process; -+ -+ /** Number of DMA descriptors for this QTD */ -+ uint8_t n_desc; -+ -+ /** -+ * Last activated frame(packet) index. -+ * Used in Descriptor DMA mode only. -+ */ -+ uint16_t isoc_frame_index_last; -+ -+} dwc_otg_qtd_t; -+ -+DWC_CIRCLEQ_HEAD(dwc_otg_qtd_list, dwc_otg_qtd); -+ -+/** -+ * A Queue Head (QH) holds the static characteristics of an endpoint and -+ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may -+ * be entered in either the non-periodic or periodic schedule. -+ */ -+typedef struct dwc_otg_qh { -+ /** -+ * Endpoint type. -+ * One of the following values: -+ * - UE_CONTROL -+ * - UE_BULK -+ * - UE_INTERRUPT -+ * - UE_ISOCHRONOUS -+ */ -+ uint8_t ep_type; -+ uint8_t ep_is_in; -+ -+ /** wMaxPacketSize Field of Endpoint Descriptor. */ -+ uint16_t maxp; -+ -+ /** -+ * Device speed. -+ * One of the following values: -+ * - DWC_OTG_EP_SPEED_LOW -+ * - DWC_OTG_EP_SPEED_FULL -+ * - DWC_OTG_EP_SPEED_HIGH -+ */ -+ uint8_t dev_speed; -+ -+ /** -+ * Determines the PID of the next data packet for non-control -+ * transfers. Ignored for control transfers.
-+ * One of the following values: -+ * - DWC_OTG_HC_PID_DATA0 -+ * - DWC_OTG_HC_PID_DATA1 -+ */ -+ uint8_t data_toggle; -+ -+ /** Ping state if 1. */ -+ uint8_t ping_state; -+ -+ /** -+ * List of QTDs for this QH. -+ */ -+ struct dwc_otg_qtd_list qtd_list; -+ -+ /** Host channel currently processing transfers for this QH. */ -+ struct dwc_hc *channel; -+ -+ /** Full/low speed endpoint on high-speed hub requires split. */ -+ uint8_t do_split; -+ -+ /** @name Periodic schedule information */ -+ /** @{ */ -+ -+ /** Bandwidth in microseconds per (micro)frame. */ -+ uint16_t usecs; -+ -+ /** Interval between transfers in (micro)frames. */ -+ uint16_t interval; -+ -+ /** -+ * (micro)frame to initialize a periodic transfer. The transfer -+ * executes in the following (micro)frame. -+ */ -+ uint16_t sched_frame; -+ -+ /* -+ ** Frame a NAK was received on this queue head, used to minimise NAK retransmission -+ */ -+ uint16_t nak_frame; -+ -+ /** (micro)frame at which last start split was initialized. */ -+ uint16_t start_split_frame; -+ -+ /** @} */ -+ -+ /** -+ * Used instead of original buffer if -+ * it(physical address) is not dword-aligned. -+ */ -+ uint8_t *dw_align_buf; -+ dwc_dma_t dw_align_buf_dma; -+ -+ /** Entry for QH in either the periodic or non-periodic schedule. */ -+ dwc_list_link_t qh_list_entry; -+ -+ /** @name Descriptor DMA support */ -+ /** @{ */ -+ -+ /** Descriptor List. */ -+ dwc_otg_host_dma_desc_t *desc_list; -+ -+ /** Descriptor List physical address. */ -+ dwc_dma_t desc_list_dma; -+ -+ /** -+ * Xfer Bytes array. -+ * Each element corresponds to a descriptor and indicates -+ * original XferSize size value for the descriptor. -+ */ -+ uint32_t *n_bytes; -+ -+ /** Actual number of transfer descriptors in a list. */ -+ uint16_t ntd; -+ -+ /** First activated isochronous transfer descriptor index. */ -+ uint8_t td_first; -+ /** Last activated isochronous transfer descriptor index. */ -+ uint8_t td_last; -+ -+ /** @} */ -+ -+ -+ uint16_t speed; -+ uint16_t frame_usecs[8]; -+ -+ uint32_t skip_count; -+} dwc_otg_qh_t; -+ -+DWC_CIRCLEQ_HEAD(hc_list, dwc_hc); -+ -+typedef struct urb_tq_entry { -+ struct urb *urb; -+ DWC_TAILQ_ENTRY(urb_tq_entry) urb_tq_entries; -+} urb_tq_entry_t; -+ -+DWC_TAILQ_HEAD(urb_list, urb_tq_entry); -+ -+/** -+ * This structure holds the state of the HCD, including the non-periodic and -+ * periodic schedules. -+ */ -+struct dwc_otg_hcd { -+ /** The DWC otg device pointer */ -+ struct dwc_otg_device *otg_dev; -+ /** DWC OTG Core Interface Layer */ -+ dwc_otg_core_if_t *core_if; -+ -+ /** Function HCD driver callbacks */ -+ struct dwc_otg_hcd_function_ops *fops; -+ -+ /** Internal DWC HCD Flags */ -+ volatile union dwc_otg_hcd_internal_flags { -+ uint32_t d32; -+ struct { -+ unsigned port_connect_status_change:1; -+ unsigned port_connect_status:1; -+ unsigned port_reset_change:1; -+ unsigned port_enable_change:1; -+ unsigned port_suspend_change:1; -+ unsigned port_over_current_change:1; -+ unsigned port_l1_change:1; -+ unsigned reserved:26; -+ } b; -+ } flags; -+ -+ /** -+ * Inactive items in the non-periodic schedule. This is a list of -+ * Queue Heads. Transfers associated with these Queue Heads are not -+ * currently assigned to a host channel. -+ */ -+ dwc_list_link_t non_periodic_sched_inactive; -+ -+ /** -+ * Active items in the non-periodic schedule. This is a list of -+ * Queue Heads. Transfers associated with these Queue Heads are -+ * currently assigned to a host channel. -+ */ -+ dwc_list_link_t non_periodic_sched_active; -+ -+ /** -+ * Pointer to the next Queue Head to process in the active -+ * non-periodic schedule. -+ */ -+ dwc_list_link_t *non_periodic_qh_ptr; -+ -+ /** -+ * Inactive items in the periodic schedule. This is a list of QHs for -+ * periodic transfers that are _not_ scheduled for the next frame. -+ * Each QH in the list has an interval counter that determines when it -+ * needs to be scheduled for execution. This scheduling mechanism -+ * allows only a simple calculation for periodic bandwidth used (i.e. -+ * must assume that all periodic transfers may need to execute in the -+ * same frame). However, it greatly simplifies scheduling and should -+ * be sufficient for the vast majority of OTG hosts, which need to -+ * connect to a small number of peripherals at one time. -+ * -+ * Items move from this list to periodic_sched_ready when the QH -+ * interval counter is 0 at SOF. -+ */ -+ dwc_list_link_t periodic_sched_inactive; -+ -+ /** -+ * List of periodic QHs that are ready for execution in the next -+ * frame, but have not yet been assigned to host channels. -+ * -+ * Items move from this list to periodic_sched_assigned as host -+ * channels become available during the current frame. -+ */ -+ dwc_list_link_t periodic_sched_ready; -+ -+ /** -+ * List of periodic QHs to be executed in the next frame that are -+ * assigned to host channels. -+ * -+ * Items move from this list to periodic_sched_queued as the -+ * transactions for the QH are queued to the DWC_otg controller. -+ */ -+ dwc_list_link_t periodic_sched_assigned; -+ -+ /** -+ * List of periodic QHs that have been queued for execution. -+ * -+ * Items move from this list to either periodic_sched_inactive or -+ * periodic_sched_ready when the channel associated with the transfer -+ * is released. If the interval for the QH is 1, the item moves to -+ * periodic_sched_ready because it must be rescheduled for the next -+ * frame. Otherwise, the item moves to periodic_sched_inactive. -+ */ -+ dwc_list_link_t periodic_sched_queued; -+ -+ /** -+ * Total bandwidth claimed so far for periodic transfers. This value -+ * is in microseconds per (micro)frame. The assumption is that all -+ * periodic transfers may occur in the same (micro)frame. -+ */ -+ uint16_t periodic_usecs; -+ -+ /** -+ * Total bandwidth claimed so far for all periodic transfers -+ * in a frame. -+ * This will include a mixture of HS and FS transfers. -+ * Units are microseconds per (micro)frame. -+ * We have a budget per frame and have to schedule -+ * transactions accordingly. -+ * Watch out for the fact that things are actually scheduled for the -+ * "next frame". -+ */ -+ uint16_t frame_usecs[8]; -+ -+ -+ /** -+ * Frame number read from the core at SOF. The value ranges from 0 to -+ * DWC_HFNUM_MAX_FRNUM. -+ */ -+ uint16_t frame_number; -+ -+ /** -+ * Count of periodic QHs, if using several eps. For SOF enable/disable. -+ */ -+ uint16_t periodic_qh_count; -+ -+ /** -+ * Free host channels in the controller. This is a list of -+ * dwc_hc_t items. -+ */ -+ struct hc_list free_hc_list; -+ /** -+ * Number of host channels assigned to periodic transfers. Currently -+ * assuming that there is a dedicated host channel for each periodic -+ * transaction and at least one host channel available for -+ * non-periodic transactions. -+ */ -+ int periodic_channels; /* microframe_schedule==0 */ -+ -+ /** -+ * Number of host channels assigned to non-periodic transfers. -+ */ -+ int non_periodic_channels; /* microframe_schedule==0 */ -+ -+ /** -+ * Number of host channels assigned to non-periodic transfers. -+ */ -+ int available_host_channels; -+ -+ /** -+ * Array of pointers to the host channel descriptors. Allows accessing -+ * a host channel descriptor given the host channel number. This is -+ * useful in interrupt handlers. -+ */ -+ struct dwc_hc *hc_ptr_array[MAX_EPS_CHANNELS]; -+ -+ /** -+ * Buffer to use for any data received during the status phase of a -+ * control transfer. Normally no data is transferred during the status -+ * phase. This buffer is used as a bit bucket. -+ */ -+ uint8_t *status_buf; -+ -+ /** -+ * DMA address for status_buf. -+ */ -+ dma_addr_t status_buf_dma; -+#define DWC_OTG_HCD_STATUS_BUF_SIZE 64 -+ -+ /** -+ * Connection timer. An OTG host must display a message if the device -+ * does not connect. Started when the VBus power is turned on via -+ * sysfs attribute "buspower". -+ */ -+ dwc_timer_t *conn_timer; -+ -+ /* Tasket to do a reset */ -+ dwc_tasklet_t *reset_tasklet; -+ -+ dwc_tasklet_t *completion_tasklet; -+ struct urb_list completed_urb_list; -+ -+ /* */ -+ dwc_spinlock_t *lock; -+ dwc_spinlock_t *channel_lock; -+ /** -+ * Private data that could be used by OS wrapper. -+ */ -+ void *priv; -+ -+ uint8_t otg_port; -+ -+ /** Frame List */ -+ uint32_t *frame_list; -+ -+ /** Hub - Port assignment */ -+ int hub_port[128]; -+#ifdef FIQ_DEBUG -+ int hub_port_alloc[2048]; -+#endif -+ -+ /** Frame List DMA address */ -+ dma_addr_t frame_list_dma; -+ -+ struct fiq_stack *fiq_stack; -+ struct fiq_state *fiq_state; -+ -+ /** Virtual address for split transaction DMA bounce buffers */ -+ struct fiq_dma_blob *fiq_dmab; -+ -+#ifdef DEBUG -+ uint32_t frrem_samples; -+ uint64_t frrem_accum; -+ -+ uint32_t hfnum_7_samples_a; -+ uint64_t hfnum_7_frrem_accum_a; -+ uint32_t hfnum_0_samples_a; -+ uint64_t hfnum_0_frrem_accum_a; -+ uint32_t hfnum_other_samples_a; -+ uint64_t hfnum_other_frrem_accum_a; -+ -+ uint32_t hfnum_7_samples_b; -+ uint64_t hfnum_7_frrem_accum_b; -+ uint32_t hfnum_0_samples_b; -+ uint64_t hfnum_0_frrem_accum_b; -+ uint32_t hfnum_other_samples_b; -+ uint64_t hfnum_other_frrem_accum_b; -+#endif -+}; -+ -+static inline struct device *dwc_otg_hcd_to_dev(struct dwc_otg_hcd *hcd) -+{ -+ return &hcd->otg_dev->os_dep.platformdev->dev; -+} -+ -+/** @name Transaction Execution Functions */ -+/** @{ */ -+extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t -+ * hcd); -+extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd, -+ dwc_otg_transaction_type_e tr_type); -+ -+int dwc_otg_hcd_allocate_port(dwc_otg_hcd_t * hcd, dwc_otg_qh_t *qh); -+void dwc_otg_hcd_release_port(dwc_otg_hcd_t * dwc_otg_hcd, dwc_otg_qh_t *qh); -+ -+extern int fiq_fsm_queue_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh); -+extern int fiq_fsm_transaction_suitable(dwc_otg_qh_t *qh); -+extern void dwc_otg_cleanup_fiq_channel(dwc_otg_hcd_t *hcd, uint32_t num); -+ -+/** @} */ -+ -+/** @name Interrupt Handler Functions */ -+/** @{ */ -+extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t * -+ dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t * -+ dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t * -+ dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t * -+ dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t * -+ dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t * dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, -+ uint32_t num); -+extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t * dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t * -+ dwc_otg_hcd); -+/** @} */ -+ -+/** @name Schedule Queue Functions */ -+/** @{ */ -+ -+/* Implemented in dwc_otg_hcd_queue.c */ -+extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd, -+ dwc_otg_hcd_urb_t * urb, int atomic_alloc); -+extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); -+extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); -+extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); -+extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, -+ int sched_csplit); -+ -+/** Remove and free a QH */ -+static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t * hcd, -+ dwc_otg_qh_t * qh) -+{ -+ dwc_irqflags_t flags; -+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); -+ dwc_otg_hcd_qh_remove(hcd, qh); -+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); -+ dwc_otg_hcd_qh_free(hcd, qh); -+} -+ -+/** Allocates memory for a QH structure. -+ * @return Returns the memory allocate or NULL on error. */ -+static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(int atomic_alloc) -+{ -+ if (atomic_alloc) -+ return (dwc_otg_qh_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qh_t)); -+ else -+ return (dwc_otg_qh_t *) DWC_ALLOC(sizeof(dwc_otg_qh_t)); -+} -+ -+extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb, -+ int atomic_alloc); -+extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb); -+extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd, dwc_otg_hcd_t * dwc_otg_hcd, -+ dwc_otg_qh_t ** qh, int atomic_alloc); -+ -+/** Allocates memory for a QTD structure. -+ * @return Returns the memory allocate or NULL on error. */ -+static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(int atomic_alloc) -+{ -+ if (atomic_alloc) -+ return (dwc_otg_qtd_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qtd_t)); -+ else -+ return (dwc_otg_qtd_t *) DWC_ALLOC(sizeof(dwc_otg_qtd_t)); -+} -+ -+/** Frees the memory for a QTD structure. QTD should already be removed from -+ * list. -+ * @param qtd QTD to free.*/ -+static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t * qtd) -+{ -+ DWC_FREE(qtd); -+} -+ -+/** Removes a QTD from list. -+ * @param hcd HCD instance. -+ * @param qtd QTD to remove from list. -+ * @param qh QTD belongs to. -+ */ -+static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t * hcd, -+ dwc_otg_qtd_t * qtd, -+ dwc_otg_qh_t * qh) -+{ -+ DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry); -+} -+ -+/** Remove and free a QTD -+ * Need to disable IRQ and hold hcd lock while calling this function out of -+ * interrupt servicing chain */ -+static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t * hcd, -+ dwc_otg_qtd_t * qtd, -+ dwc_otg_qh_t * qh) -+{ -+ dwc_otg_hcd_qtd_remove(hcd, qtd, qh); -+ dwc_otg_hcd_qtd_free(qtd); -+} -+ -+/** @} */ -+ -+/** @name Descriptor DMA Supporting Functions */ -+/** @{ */ -+ -+extern void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); -+extern void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_halt_status_e halt_status); -+ -+extern int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); -+extern void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); -+ -+/** @} */ -+ -+/** @name Internal Functions */ -+/** @{ */ -+dwc_otg_qh_t *dwc_urb_to_qh(dwc_otg_hcd_urb_t * urb); -+/** @} */ -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+extern int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd, -+ uint8_t devaddr); -+extern void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd); -+#endif -+ -+/** Gets the QH that contains the list_head */ -+#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry) -+ -+/** Gets the QTD that contains the list_head */ -+#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry) -+ -+/** Check if QH is non-periodic */ -+#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == UE_BULK) || \ -+ (_qh_ptr_->ep_type == UE_CONTROL)) -+ -+/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */ -+#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) -+ -+/** Packet size for any kind of endpoint descriptor */ -+#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) -+ -+/** -+ * Returns true if _frame1 is less than or equal to _frame2. The comparison is -+ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the -+ * frame number when the max frame number is reached. -+ */ -+static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2) -+{ -+ return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <= -+ (DWC_HFNUM_MAX_FRNUM >> 1); -+} -+ -+/** -+ * Returns true if _frame1 is greater than _frame2. The comparison is done -+ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame -+ * number when the max frame number is reached. -+ */ -+static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2) -+{ -+ return (frame1 != frame2) && -+ (((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) < -+ (DWC_HFNUM_MAX_FRNUM >> 1)); -+} -+ -+/** -+ * Increments _frame by the amount specified by _inc. The addition is done -+ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value. -+ */ -+static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc) -+{ -+ return (frame + inc) & DWC_HFNUM_MAX_FRNUM; -+} -+ -+static inline uint16_t dwc_full_frame_num(uint16_t frame) -+{ -+ return (frame & DWC_HFNUM_MAX_FRNUM) >> 3; -+} -+ -+static inline uint16_t dwc_micro_frame_num(uint16_t frame) -+{ -+ return frame & 0x7; -+} -+ -+void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd); -+ -+#ifdef DEBUG -+/** -+ * Macro to sample the remaining PHY clocks left in the current frame. This -+ * may be used during debugging to determine the average time it takes to -+ * execute sections of code. There are two possible sample points, "a" and -+ * "b", so the _letter argument must be one of these values. -+ * -+ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For -+ * example, "cat /sys/devices/lm0/hcd_frrem". -+ */ -+#define dwc_sample_frrem(_hcd, _qh, _letter) \ -+{ \ -+ hfnum_data_t hfnum; \ -+ dwc_otg_qtd_t *qtd; \ -+ qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \ -+ if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \ -+ hfnum.d32 = DWC_READ_REG32(&_hcd->core_if->host_if->host_global_regs->hfnum); \ -+ switch (hfnum.b.frnum & 0x7) { \ -+ case 7: \ -+ _hcd->hfnum_7_samples_##_letter++; \ -+ _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \ -+ break; \ -+ case 0: \ -+ _hcd->hfnum_0_samples_##_letter++; \ -+ _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \ -+ break; \ -+ default: \ -+ _hcd->hfnum_other_samples_##_letter++; \ -+ _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \ -+ break; \ -+ } \ -+ } \ -+} -+#else -+#define dwc_sample_frrem(_hcd, _qh, _letter) -+#endif -+#endif -+#endif /* DWC_DEVICE_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c -@@ -0,0 +1,1139 @@ -+/*========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_ddma.c $ -+ * $Revision: #10 $ -+ * $Date: 2011/10/20 $ -+ * $Change: 1869464 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_DEVICE_ONLY -+ -+/** @file -+ * This file contains Descriptor DMA support implementation for host mode. -+ */ -+ -+#include "dwc_otg_hcd.h" -+#include "dwc_otg_regs.h" -+ -+extern bool microframe_schedule; -+ -+static inline uint8_t frame_list_idx(uint16_t frame) -+{ -+ return (frame & (MAX_FRLIST_EN_NUM - 1)); -+} -+ -+static inline uint16_t desclist_idx_inc(uint16_t idx, uint16_t inc, uint8_t speed) -+{ -+ return (idx + inc) & -+ (((speed == -+ DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC : -+ MAX_DMA_DESC_NUM_GENERIC) - 1); -+} -+ -+static inline uint16_t desclist_idx_dec(uint16_t idx, uint16_t inc, uint8_t speed) -+{ -+ return (idx - inc) & -+ (((speed == -+ DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC : -+ MAX_DMA_DESC_NUM_GENERIC) - 1); -+} -+ -+static inline uint16_t max_desc_num(dwc_otg_qh_t * qh) -+{ -+ return (((qh->ep_type == UE_ISOCHRONOUS) -+ && (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH)) -+ ? MAX_DMA_DESC_NUM_HS_ISOC : MAX_DMA_DESC_NUM_GENERIC); -+} -+static inline uint16_t frame_incr_val(dwc_otg_qh_t * qh) -+{ -+ return ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) -+ ? ((qh->interval + 8 - 1) / 8) -+ : qh->interval); -+} -+ -+static int desc_list_alloc(struct device *dev, dwc_otg_qh_t * qh) -+{ -+ int retval = 0; -+ -+ qh->desc_list = (dwc_otg_host_dma_desc_t *) -+ DWC_DMA_ALLOC(dev, sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh), -+ &qh->desc_list_dma); -+ -+ if (!qh->desc_list) { -+ retval = -DWC_E_NO_MEMORY; -+ DWC_ERROR("%s: DMA descriptor list allocation failed\n", __func__); -+ -+ } -+ -+ dwc_memset(qh->desc_list, 0x00, -+ sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh)); -+ -+ qh->n_bytes = -+ (uint32_t *) DWC_ALLOC(sizeof(uint32_t) * max_desc_num(qh)); -+ -+ if (!qh->n_bytes) { -+ retval = -DWC_E_NO_MEMORY; -+ DWC_ERROR -+ ("%s: Failed to allocate array for descriptors' size actual values\n", -+ __func__); -+ -+ } -+ return retval; -+ -+} -+ -+static void desc_list_free(struct device *dev, dwc_otg_qh_t * qh) -+{ -+ if (qh->desc_list) { -+ DWC_DMA_FREE(dev, max_desc_num(qh), qh->desc_list, -+ qh->desc_list_dma); -+ qh->desc_list = NULL; -+ } -+ -+ if (qh->n_bytes) { -+ DWC_FREE(qh->n_bytes); -+ qh->n_bytes = NULL; -+ } -+} -+ -+static int frame_list_alloc(dwc_otg_hcd_t * hcd) -+{ -+ struct device *dev = dwc_otg_hcd_to_dev(hcd); -+ int retval = 0; -+ -+ if (hcd->frame_list) -+ return 0; -+ -+ hcd->frame_list = DWC_DMA_ALLOC(dev, 4 * MAX_FRLIST_EN_NUM, -+ &hcd->frame_list_dma); -+ if (!hcd->frame_list) { -+ retval = -DWC_E_NO_MEMORY; -+ DWC_ERROR("%s: Frame List allocation failed\n", __func__); -+ } -+ -+ dwc_memset(hcd->frame_list, 0x00, 4 * MAX_FRLIST_EN_NUM); -+ -+ return retval; -+} -+ -+static void frame_list_free(dwc_otg_hcd_t * hcd) -+{ -+ struct device *dev = dwc_otg_hcd_to_dev(hcd); -+ -+ if (!hcd->frame_list) -+ return; -+ -+ DWC_DMA_FREE(dev, 4 * MAX_FRLIST_EN_NUM, hcd->frame_list, hcd->frame_list_dma); -+ hcd->frame_list = NULL; -+} -+ -+static void per_sched_enable(dwc_otg_hcd_t * hcd, uint16_t fr_list_en) -+{ -+ -+ hcfg_data_t hcfg; -+ -+ hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg); -+ -+ if (hcfg.b.perschedena) { -+ /* already enabled */ -+ return; -+ } -+ -+ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hflbaddr, -+ hcd->frame_list_dma); -+ -+ switch (fr_list_en) { -+ case 64: -+ hcfg.b.frlisten = 3; -+ break; -+ case 32: -+ hcfg.b.frlisten = 2; -+ break; -+ case 16: -+ hcfg.b.frlisten = 1; -+ break; -+ case 8: -+ hcfg.b.frlisten = 0; -+ break; -+ default: -+ break; -+ } -+ -+ hcfg.b.perschedena = 1; -+ -+ DWC_DEBUGPL(DBG_HCD, "Enabling Periodic schedule\n"); -+ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32); -+ -+} -+ -+static void per_sched_disable(dwc_otg_hcd_t * hcd) -+{ -+ hcfg_data_t hcfg; -+ -+ hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg); -+ -+ if (!hcfg.b.perschedena) { -+ /* already disabled */ -+ return; -+ } -+ hcfg.b.perschedena = 0; -+ -+ DWC_DEBUGPL(DBG_HCD, "Disabling Periodic schedule\n"); -+ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32); -+} -+ -+/* -+ * Activates/Deactivates FrameList entries for the channel -+ * based on endpoint servicing period. -+ */ -+void update_frame_list(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, uint8_t enable) -+{ -+ uint16_t i, j, inc; -+ dwc_hc_t *hc = NULL; -+ -+ if (!qh->channel) { -+ DWC_ERROR("qh->channel = %p", qh->channel); -+ return; -+ } -+ -+ if (!hcd) { -+ DWC_ERROR("------hcd = %p", hcd); -+ return; -+ } -+ -+ if (!hcd->frame_list) { -+ DWC_ERROR("-------hcd->frame_list = %p", hcd->frame_list); -+ return; -+ } -+ -+ hc = qh->channel; -+ inc = frame_incr_val(qh); -+ if (qh->ep_type == UE_ISOCHRONOUS) -+ i = frame_list_idx(qh->sched_frame); -+ else -+ i = 0; -+ -+ j = i; -+ do { -+ if (enable) -+ hcd->frame_list[j] |= (1 << hc->hc_num); -+ else -+ hcd->frame_list[j] &= ~(1 << hc->hc_num); -+ j = (j + inc) & (MAX_FRLIST_EN_NUM - 1); -+ } -+ while (j != i); -+ if (!enable) -+ return; -+ hc->schinfo = 0; -+ if (qh->channel->speed == DWC_OTG_EP_SPEED_HIGH) { -+ j = 1; -+ /* TODO - check this */ -+ inc = (8 + qh->interval - 1) / qh->interval; -+ for (i = 0; i < inc; i++) { -+ hc->schinfo |= j; -+ j = j << qh->interval; -+ } -+ } else { -+ hc->schinfo = 0xff; -+ } -+} -+ -+#if 1 -+void dump_frame_list(dwc_otg_hcd_t * hcd) -+{ -+ int i = 0; -+ DWC_PRINTF("--FRAME LIST (hex) --\n"); -+ for (i = 0; i < MAX_FRLIST_EN_NUM; i++) { -+ DWC_PRINTF("%x\t", hcd->frame_list[i]); -+ if (!(i % 8) && i) -+ DWC_PRINTF("\n"); -+ } -+ DWC_PRINTF("\n----\n"); -+ -+} -+#endif -+ -+static void release_channel_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ dwc_irqflags_t flags; -+ dwc_spinlock_t *channel_lock = hcd->channel_lock; -+ -+ dwc_hc_t *hc = qh->channel; -+ if (dwc_qh_is_non_per(qh)) { -+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); -+ if (!microframe_schedule) -+ hcd->non_periodic_channels--; -+ else -+ hcd->available_host_channels++; -+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); -+ } else -+ update_frame_list(hcd, qh, 0); -+ -+ /* -+ * The condition is added to prevent double cleanup try in case of device -+ * disconnect. See channel cleanup in dwc_otg_hcd_disconnect_cb(). -+ */ -+ if (hc->qh) { -+ dwc_otg_hc_cleanup(hcd->core_if, hc); -+ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); -+ hc->qh = NULL; -+ } -+ -+ qh->channel = NULL; -+ qh->ntd = 0; -+ -+ if (qh->desc_list) { -+ dwc_memset(qh->desc_list, 0x00, -+ sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh)); -+ } -+} -+ -+/** -+ * Initializes a QH structure's Descriptor DMA related members. -+ * Allocates memory for descriptor list. -+ * On first periodic QH, allocates memory for FrameList -+ * and enables periodic scheduling. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh The QH to init. -+ * -+ * @return 0 if successful, negative error code otherwise. -+ */ -+int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ struct device *dev = dwc_otg_hcd_to_dev(hcd); -+ int retval = 0; -+ -+ if (qh->do_split) { -+ DWC_ERROR("SPLIT Transfers are not supported in Descriptor DMA.\n"); -+ return -1; -+ } -+ -+ retval = desc_list_alloc(dev, qh); -+ -+ if ((retval == 0) -+ && (qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT)) { -+ if (!hcd->frame_list) { -+ retval = frame_list_alloc(hcd); -+ /* Enable periodic schedule on first periodic QH */ -+ if (retval == 0) -+ per_sched_enable(hcd, MAX_FRLIST_EN_NUM); -+ } -+ } -+ -+ qh->ntd = 0; -+ -+ return retval; -+} -+ -+/** -+ * Frees descriptor list memory associated with the QH. -+ * If QH is periodic and the last, frees FrameList memory -+ * and disables periodic scheduling. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh The QH to init. -+ */ -+void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ struct device *dev = dwc_otg_hcd_to_dev(hcd); -+ -+ desc_list_free(dev, qh); -+ -+ /* -+ * Channel still assigned due to some reasons. -+ * Seen on Isoc URB dequeue. Channel halted but no subsequent -+ * ChHalted interrupt to release the channel. Afterwards -+ * when it comes here from endpoint disable routine -+ * channel remains assigned. -+ */ -+ if (qh->channel) -+ release_channel_ddma(hcd, qh); -+ -+ if ((qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT) -+ && (microframe_schedule || !hcd->periodic_channels) && hcd->frame_list) { -+ -+ per_sched_disable(hcd); -+ frame_list_free(hcd); -+ } -+} -+ -+static uint8_t frame_to_desc_idx(dwc_otg_qh_t * qh, uint16_t frame_idx) -+{ -+ if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) { -+ /* -+ * Descriptor set(8 descriptors) index -+ * which is 8-aligned. -+ */ -+ return (frame_idx & ((MAX_DMA_DESC_NUM_HS_ISOC / 8) - 1)) * 8; -+ } else { -+ return (frame_idx & (MAX_DMA_DESC_NUM_GENERIC - 1)); -+ } -+} -+ -+/* -+ * Determine starting frame for Isochronous transfer. -+ * Few frames skipped to prevent race condition with HC. -+ */ -+static uint8_t calc_starting_frame(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, -+ uint8_t * skip_frames) -+{ -+ uint16_t frame = 0; -+ hcd->frame_number = dwc_otg_hcd_get_frame_number(hcd); -+ -+ /* sched_frame is always frame number(not uFrame) both in FS and HS !! */ -+ -+ /* -+ * skip_frames is used to limit activated descriptors number -+ * to avoid the situation when HC services the last activated -+ * descriptor firstly. -+ * Example for FS: -+ * Current frame is 1, scheduled frame is 3. Since HC always fetches the descriptor -+ * corresponding to curr_frame+1, the descriptor corresponding to frame 2 -+ * will be fetched. If the number of descriptors is max=64 (or greather) the -+ * list will be fully programmed with Active descriptors and it is possible -+ * case(rare) that the latest descriptor(considering rollback) corresponding -+ * to frame 2 will be serviced first. HS case is more probable because, in fact, -+ * up to 11 uframes(16 in the code) may be skipped. -+ */ -+ if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) { -+ /* -+ * Consider uframe counter also, to start xfer asap. -+ * If half of the frame elapsed skip 2 frames otherwise -+ * just 1 frame. -+ * Starting descriptor index must be 8-aligned, so -+ * if the current frame is near to complete the next one -+ * is skipped as well. -+ */ -+ -+ if (dwc_micro_frame_num(hcd->frame_number) >= 5) { -+ *skip_frames = 2 * 8; -+ frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames); -+ } else { -+ *skip_frames = 1 * 8; -+ frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames); -+ } -+ -+ frame = dwc_full_frame_num(frame); -+ } else { -+ /* -+ * Two frames are skipped for FS - the current and the next. -+ * But for descriptor programming, 1 frame(descriptor) is enough, -+ * see example above. -+ */ -+ *skip_frames = 1; -+ frame = dwc_frame_num_inc(hcd->frame_number, 2); -+ } -+ -+ return frame; -+} -+ -+/* -+ * Calculate initial descriptor index for isochronous transfer -+ * based on scheduled frame. -+ */ -+static uint8_t recalc_initial_desc_idx(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ uint16_t frame = 0, fr_idx, fr_idx_tmp; -+ uint8_t skip_frames = 0; -+ /* -+ * With current ISOC processing algorithm the channel is being -+ * released when no more QTDs in the list(qh->ntd == 0). -+ * Thus this function is called only when qh->ntd == 0 and qh->channel == 0. -+ * -+ * So qh->channel != NULL branch is not used and just not removed from the -+ * source file. It is required for another possible approach which is, -+ * do not disable and release the channel when ISOC session completed, -+ * just move QH to inactive schedule until new QTD arrives. -+ * On new QTD, the QH moved back to 'ready' schedule, -+ * starting frame and therefore starting desc_index are recalculated. -+ * In this case channel is released only on ep_disable. -+ */ -+ -+ /* Calculate starting descriptor index. For INTERRUPT endpoint it is always 0. */ -+ if (qh->channel) { -+ frame = calc_starting_frame(hcd, qh, &skip_frames); -+ /* -+ * Calculate initial descriptor index based on FrameList current bitmap -+ * and servicing period. -+ */ -+ fr_idx_tmp = frame_list_idx(frame); -+ fr_idx = -+ (MAX_FRLIST_EN_NUM + frame_list_idx(qh->sched_frame) - -+ fr_idx_tmp) -+ % frame_incr_val(qh); -+ fr_idx = (fr_idx + fr_idx_tmp) % MAX_FRLIST_EN_NUM; -+ } else { -+ qh->sched_frame = calc_starting_frame(hcd, qh, &skip_frames); -+ fr_idx = frame_list_idx(qh->sched_frame); -+ } -+ -+ qh->td_first = qh->td_last = frame_to_desc_idx(qh, fr_idx); -+ -+ return skip_frames; -+} -+ -+#define ISOC_URB_GIVEBACK_ASAP -+ -+#define MAX_ISOC_XFER_SIZE_FS 1023 -+#define MAX_ISOC_XFER_SIZE_HS 3072 -+#define DESCNUM_THRESHOLD 4 -+ -+static void init_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, -+ uint8_t skip_frames) -+{ -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc; -+ dwc_otg_qtd_t *qtd; -+ dwc_otg_host_dma_desc_t *dma_desc; -+ uint16_t idx, inc, n_desc, ntd_max, max_xfer_size; -+ -+ idx = qh->td_last; -+ inc = qh->interval; -+ n_desc = 0; -+ -+ ntd_max = (max_desc_num(qh) + qh->interval - 1) / qh->interval; -+ if (skip_frames && !qh->channel) -+ ntd_max = ntd_max - skip_frames / qh->interval; -+ -+ max_xfer_size = -+ (qh->dev_speed == -+ DWC_OTG_EP_SPEED_HIGH) ? MAX_ISOC_XFER_SIZE_HS : -+ MAX_ISOC_XFER_SIZE_FS; -+ -+ DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) { -+ while ((qh->ntd < ntd_max) -+ && (qtd->isoc_frame_index_last < -+ qtd->urb->packet_count)) { -+ -+ dma_desc = &qh->desc_list[idx]; -+ dwc_memset(dma_desc, 0x00, sizeof(dwc_otg_host_dma_desc_t)); -+ -+ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index_last]; -+ -+ if (frame_desc->length > max_xfer_size) -+ qh->n_bytes[idx] = max_xfer_size; -+ else -+ qh->n_bytes[idx] = frame_desc->length; -+ dma_desc->status.b_isoc.n_bytes = qh->n_bytes[idx]; -+ dma_desc->status.b_isoc.a = 1; -+ dma_desc->status.b_isoc.sts = 0; -+ -+ dma_desc->buf = qtd->urb->dma + frame_desc->offset; -+ -+ qh->ntd++; -+ -+ qtd->isoc_frame_index_last++; -+ -+#ifdef ISOC_URB_GIVEBACK_ASAP -+ /* -+ * Set IOC for each descriptor corresponding to the -+ * last frame of the URB. -+ */ -+ if (qtd->isoc_frame_index_last == -+ qtd->urb->packet_count) -+ dma_desc->status.b_isoc.ioc = 1; -+ -+#endif -+ idx = desclist_idx_inc(idx, inc, qh->dev_speed); -+ n_desc++; -+ -+ } -+ qtd->in_process = 1; -+ } -+ -+ qh->td_last = idx; -+ -+#ifdef ISOC_URB_GIVEBACK_ASAP -+ /* Set IOC for the last descriptor if descriptor list is full */ -+ if (qh->ntd == ntd_max) { -+ idx = desclist_idx_dec(qh->td_last, inc, qh->dev_speed); -+ qh->desc_list[idx].status.b_isoc.ioc = 1; -+ } -+#else -+ /* -+ * Set IOC bit only for one descriptor. -+ * Always try to be ahead of HW processing, -+ * i.e. on IOC generation driver activates next descriptors but -+ * core continues to process descriptors followed the one with IOC set. -+ */ -+ -+ if (n_desc > DESCNUM_THRESHOLD) { -+ /* -+ * Move IOC "up". Required even if there is only one QTD -+ * in the list, cause QTDs migth continue to be queued, -+ * but during the activation it was only one queued. -+ * Actually more than one QTD might be in the list if this function called -+ * from XferCompletion - QTDs was queued during HW processing of the previous -+ * descriptor chunk. -+ */ -+ idx = dwc_desclist_idx_dec(idx, inc * ((qh->ntd + 1) / 2), qh->dev_speed); -+ } else { -+ /* -+ * Set the IOC for the latest descriptor -+ * if either number of descriptor is not greather than threshold -+ * or no more new descriptors activated. -+ */ -+ idx = dwc_desclist_idx_dec(qh->td_last, inc, qh->dev_speed); -+ } -+ -+ qh->desc_list[idx].status.b_isoc.ioc = 1; -+#endif -+} -+ -+static void init_non_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ -+ dwc_hc_t *hc; -+ dwc_otg_host_dma_desc_t *dma_desc; -+ dwc_otg_qtd_t *qtd; -+ int num_packets, len, n_desc = 0; -+ -+ hc = qh->channel; -+ -+ /* -+ * Start with hc->xfer_buff initialized in -+ * assign_and_init_hc(), then if SG transfer consists of multiple URBs, -+ * this pointer re-assigned to the buffer of the currently processed QTD. -+ * For non-SG request there is always one QTD active. -+ */ -+ -+ DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) { -+ -+ if (n_desc) { -+ /* SG request - more than 1 QTDs */ -+ hc->xfer_buff = (uint8_t *)qtd->urb->dma + qtd->urb->actual_length; -+ hc->xfer_len = qtd->urb->length - qtd->urb->actual_length; -+ } -+ -+ qtd->n_desc = 0; -+ -+ do { -+ dma_desc = &qh->desc_list[n_desc]; -+ len = hc->xfer_len; -+ -+ if (len > MAX_DMA_DESC_SIZE) -+ len = MAX_DMA_DESC_SIZE - hc->max_packet + 1; -+ -+ if (hc->ep_is_in) { -+ if (len > 0) { -+ num_packets = (len + hc->max_packet - 1) / hc->max_packet; -+ } else { -+ /* Need 1 packet for transfer length of 0. */ -+ num_packets = 1; -+ } -+ /* Always program an integral # of max packets for IN transfers. */ -+ len = num_packets * hc->max_packet; -+ } -+ -+ dma_desc->status.b.n_bytes = len; -+ -+ qh->n_bytes[n_desc] = len; -+ -+ if ((qh->ep_type == UE_CONTROL) -+ && (qtd->control_phase == DWC_OTG_CONTROL_SETUP)) -+ dma_desc->status.b.sup = 1; /* Setup Packet */ -+ -+ dma_desc->status.b.a = 1; /* Active descriptor */ -+ dma_desc->status.b.sts = 0; -+ -+ dma_desc->buf = -+ ((unsigned long)hc->xfer_buff & 0xffffffff); -+ -+ /* -+ * Last descriptor(or single) of IN transfer -+ * with actual size less than MaxPacket. -+ */ -+ if (len > hc->xfer_len) { -+ hc->xfer_len = 0; -+ } else { -+ hc->xfer_buff += len; -+ hc->xfer_len -= len; -+ } -+ -+ qtd->n_desc++; -+ n_desc++; -+ } -+ while ((hc->xfer_len > 0) && (n_desc != MAX_DMA_DESC_NUM_GENERIC)); -+ -+ -+ qtd->in_process = 1; -+ -+ if (qh->ep_type == UE_CONTROL) -+ break; -+ -+ if (n_desc == MAX_DMA_DESC_NUM_GENERIC) -+ break; -+ } -+ -+ if (n_desc) { -+ /* Request Transfer Complete interrupt for the last descriptor */ -+ qh->desc_list[n_desc - 1].status.b.ioc = 1; -+ /* End of List indicator */ -+ qh->desc_list[n_desc - 1].status.b.eol = 1; -+ -+ hc->ntd = n_desc; -+ } -+} -+ -+/** -+ * For Control and Bulk endpoints initializes descriptor list -+ * and starts the transfer. -+ * -+ * For Interrupt and Isochronous endpoints initializes descriptor list -+ * then updates FrameList, marking appropriate entries as active. -+ * In case of Isochronous, the starting descriptor index is calculated based -+ * on the scheduled frame, but only on the first transfer descriptor within a session. -+ * Then starts the transfer via enabling the channel. -+ * For Isochronous endpoint the channel is not halted on XferComplete -+ * interrupt so remains assigned to the endpoint(QH) until session is done. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh The QH to init. -+ * -+ * @return 0 if successful, negative error code otherwise. -+ */ -+void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ /* Channel is already assigned */ -+ dwc_hc_t *hc = qh->channel; -+ uint8_t skip_frames = 0; -+ -+ switch (hc->ep_type) { -+ case DWC_OTG_EP_TYPE_CONTROL: -+ case DWC_OTG_EP_TYPE_BULK: -+ init_non_isoc_dma_desc(hcd, qh); -+ -+ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); -+ break; -+ case DWC_OTG_EP_TYPE_INTR: -+ init_non_isoc_dma_desc(hcd, qh); -+ -+ update_frame_list(hcd, qh, 1); -+ -+ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); -+ break; -+ case DWC_OTG_EP_TYPE_ISOC: -+ -+ if (!qh->ntd) -+ skip_frames = recalc_initial_desc_idx(hcd, qh); -+ -+ init_isoc_dma_desc(hcd, qh, skip_frames); -+ -+ if (!hc->xfer_started) { -+ -+ update_frame_list(hcd, qh, 1); -+ -+ /* -+ * Always set to max, instead of actual size. -+ * Otherwise ntd will be changed with -+ * channel being enabled. Not recommended. -+ * -+ */ -+ hc->ntd = max_desc_num(qh); -+ /* Enable channel only once for ISOC */ -+ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); -+ } -+ -+ break; -+ default: -+ -+ break; -+ } -+} -+ -+static void complete_isoc_xfer_ddma(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_halt_status_e halt_status) -+{ -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc; -+ dwc_otg_qtd_t *qtd, *qtd_tmp; -+ dwc_otg_qh_t *qh; -+ dwc_otg_host_dma_desc_t *dma_desc; -+ uint16_t idx, remain; -+ uint8_t urb_compl; -+ -+ qh = hc->qh; -+ idx = qh->td_first; -+ -+ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { -+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) -+ qtd->in_process = 0; -+ return; -+ } else if ((halt_status == DWC_OTG_HC_XFER_AHB_ERR) || -+ (halt_status == DWC_OTG_HC_XFER_BABBLE_ERR)) { -+ /* -+ * Channel is halted in these error cases. -+ * Considered as serious issues. -+ * Complete all URBs marking all frames as failed, -+ * irrespective whether some of the descriptors(frames) succeeded or no. -+ * Pass error code to completion routine as well, to -+ * update urb->status, some of class drivers might use it to stop -+ * queing transfer requests. -+ */ -+ int err = (halt_status == DWC_OTG_HC_XFER_AHB_ERR) -+ ? (-DWC_E_IO) -+ : (-DWC_E_OVERFLOW); -+ -+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { -+ for (idx = 0; idx < qtd->urb->packet_count; idx++) { -+ frame_desc = &qtd->urb->iso_descs[idx]; -+ frame_desc->status = err; -+ } -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, err); -+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); -+ } -+ return; -+ } -+ -+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { -+ -+ if (!qtd->in_process) -+ break; -+ -+ urb_compl = 0; -+ -+ do { -+ -+ dma_desc = &qh->desc_list[idx]; -+ -+ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; -+ remain = hc->ep_is_in ? dma_desc->status.b_isoc.n_bytes : 0; -+ -+ if (dma_desc->status.b_isoc.sts == DMA_DESC_STS_PKTERR) { -+ /* -+ * XactError or, unable to complete all the transactions -+ * in the scheduled micro-frame/frame, -+ * both indicated by DMA_DESC_STS_PKTERR. -+ */ -+ qtd->urb->error_count++; -+ frame_desc->actual_length = qh->n_bytes[idx] - remain; -+ frame_desc->status = -DWC_E_PROTOCOL; -+ } else { -+ /* Success */ -+ -+ frame_desc->actual_length = qh->n_bytes[idx] - remain; -+ frame_desc->status = 0; -+ } -+ -+ if (++qtd->isoc_frame_index == qtd->urb->packet_count) { -+ /* -+ * urb->status is not used for isoc transfers here. -+ * The individual frame_desc status are used instead. -+ */ -+ -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); -+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); -+ -+ /* -+ * This check is necessary because urb_dequeue can be called -+ * from urb complete callback(sound driver example). -+ * All pending URBs are dequeued there, so no need for -+ * further processing. -+ */ -+ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { -+ return; -+ } -+ -+ urb_compl = 1; -+ -+ } -+ -+ qh->ntd--; -+ -+ /* Stop if IOC requested descriptor reached */ -+ if (dma_desc->status.b_isoc.ioc) { -+ idx = desclist_idx_inc(idx, qh->interval, hc->speed); -+ goto stop_scan; -+ } -+ -+ idx = desclist_idx_inc(idx, qh->interval, hc->speed); -+ -+ if (urb_compl) -+ break; -+ } -+ while (idx != qh->td_first); -+ } -+stop_scan: -+ qh->td_first = idx; -+} -+ -+uint8_t update_non_isoc_urb_state_ddma(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_qtd_t * qtd, -+ dwc_otg_host_dma_desc_t * dma_desc, -+ dwc_otg_halt_status_e halt_status, -+ uint32_t n_bytes, uint8_t * xfer_done) -+{ -+ -+ uint16_t remain = hc->ep_is_in ? dma_desc->status.b.n_bytes : 0; -+ dwc_otg_hcd_urb_t *urb = qtd->urb; -+ -+ if (halt_status == DWC_OTG_HC_XFER_AHB_ERR) { -+ urb->status = -DWC_E_IO; -+ return 1; -+ } -+ if (dma_desc->status.b.sts == DMA_DESC_STS_PKTERR) { -+ switch (halt_status) { -+ case DWC_OTG_HC_XFER_STALL: -+ urb->status = -DWC_E_PIPE; -+ break; -+ case DWC_OTG_HC_XFER_BABBLE_ERR: -+ urb->status = -DWC_E_OVERFLOW; -+ break; -+ case DWC_OTG_HC_XFER_XACT_ERR: -+ urb->status = -DWC_E_PROTOCOL; -+ break; -+ default: -+ DWC_ERROR("%s: Unhandled descriptor error status (%d)\n", __func__, -+ halt_status); -+ break; -+ } -+ return 1; -+ } -+ -+ if (dma_desc->status.b.a == 1) { -+ DWC_DEBUGPL(DBG_HCDV, -+ "Active descriptor encountered on channel %d\n", -+ hc->hc_num); -+ return 0; -+ } -+ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL) { -+ if (qtd->control_phase == DWC_OTG_CONTROL_DATA) { -+ urb->actual_length += n_bytes - remain; -+ if (remain || urb->actual_length == urb->length) { -+ /* -+ * For Control Data stage do not set urb->status=0 to prevent -+ * URB callback. Set it when Status phase done. See below. -+ */ -+ *xfer_done = 1; -+ } -+ -+ } else if (qtd->control_phase == DWC_OTG_CONTROL_STATUS) { -+ urb->status = 0; -+ *xfer_done = 1; -+ } -+ /* No handling for SETUP stage */ -+ } else { -+ /* BULK and INTR */ -+ urb->actual_length += n_bytes - remain; -+ if (remain || urb->actual_length == urb->length) { -+ urb->status = 0; -+ *xfer_done = 1; -+ } -+ } -+ -+ return 0; -+} -+ -+static void complete_non_isoc_xfer_ddma(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_halt_status_e halt_status) -+{ -+ dwc_otg_hcd_urb_t *urb = NULL; -+ dwc_otg_qtd_t *qtd, *qtd_tmp; -+ dwc_otg_qh_t *qh; -+ dwc_otg_host_dma_desc_t *dma_desc; -+ uint32_t n_bytes, n_desc, i; -+ uint8_t failed = 0, xfer_done; -+ -+ n_desc = 0; -+ -+ qh = hc->qh; -+ -+ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { -+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { -+ qtd->in_process = 0; -+ } -+ return; -+ } -+ -+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) { -+ -+ urb = qtd->urb; -+ -+ n_bytes = 0; -+ xfer_done = 0; -+ -+ for (i = 0; i < qtd->n_desc; i++) { -+ dma_desc = &qh->desc_list[n_desc]; -+ -+ n_bytes = qh->n_bytes[n_desc]; -+ -+ failed = -+ update_non_isoc_urb_state_ddma(hcd, hc, qtd, -+ dma_desc, -+ halt_status, n_bytes, -+ &xfer_done); -+ -+ if (failed -+ || (xfer_done -+ && (urb->status != -DWC_E_IN_PROGRESS))) { -+ -+ hcd->fops->complete(hcd, urb->priv, urb, -+ urb->status); -+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); -+ -+ if (failed) -+ goto stop_scan; -+ } else if (qh->ep_type == UE_CONTROL) { -+ if (qtd->control_phase == DWC_OTG_CONTROL_SETUP) { -+ if (urb->length > 0) { -+ qtd->control_phase = DWC_OTG_CONTROL_DATA; -+ } else { -+ qtd->control_phase = DWC_OTG_CONTROL_STATUS; -+ } -+ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction done\n"); -+ } else if (qtd->control_phase == DWC_OTG_CONTROL_DATA) { -+ if (xfer_done) { -+ qtd->control_phase = DWC_OTG_CONTROL_STATUS; -+ DWC_DEBUGPL(DBG_HCDV, " Control data transfer done\n"); -+ } else if (i + 1 == qtd->n_desc) { -+ /* -+ * Last descriptor for Control data stage which is -+ * not completed yet. -+ */ -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ } -+ } -+ } -+ -+ n_desc++; -+ } -+ -+ } -+ -+stop_scan: -+ -+ if (qh->ep_type != UE_CONTROL) { -+ /* -+ * Resetting the data toggle for bulk -+ * and interrupt endpoints in case of stall. See handle_hc_stall_intr() -+ */ -+ if (halt_status == DWC_OTG_HC_XFER_STALL) -+ qh->data_toggle = DWC_OTG_HC_PID_DATA0; -+ else -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ } -+ -+ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { -+ hcint_data_t hcint; -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ if (hcint.b.nyet) { -+ /* -+ * Got a NYET on the last transaction of the transfer. It -+ * means that the endpoint should be in the PING state at the -+ * beginning of the next transfer. -+ */ -+ qh->ping_state = 1; -+ clear_hc_int(hc_regs, nyet); -+ } -+ -+ } -+ -+} -+ -+/** -+ * This function is called from interrupt handlers. -+ * Scans the descriptor list, updates URB's status and -+ * calls completion routine for the URB if it's done. -+ * Releases the channel to be used by other transfers. -+ * In case of Isochronous endpoint the channel is not halted until -+ * the end of the session, i.e. QTD list is empty. -+ * If periodic channel released the FrameList is updated accordingly. -+ * -+ * Calls transaction selection routines to activate pending transfers. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param hc Host channel, the transfer is completed on. -+ * @param hc_regs Host channel registers. -+ * @param halt_status Reason the channel is being halted, -+ * or just XferComplete for isochronous transfer -+ */ -+void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_halt_status_e halt_status) -+{ -+ uint8_t continue_isoc_xfer = 0; -+ dwc_otg_transaction_type_e tr_type; -+ dwc_otg_qh_t *qh = hc->qh; -+ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { -+ -+ complete_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status); -+ -+ /* Release the channel if halted or session completed */ -+ if (halt_status != DWC_OTG_HC_XFER_COMPLETE || -+ DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { -+ -+ /* Halt the channel if session completed */ -+ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { -+ dwc_otg_hc_halt(hcd->core_if, hc, halt_status); -+ } -+ -+ release_channel_ddma(hcd, qh); -+ dwc_otg_hcd_qh_remove(hcd, qh); -+ } else { -+ /* Keep in assigned schedule to continue transfer */ -+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, -+ &qh->qh_list_entry); -+ continue_isoc_xfer = 1; -+ -+ } -+ /** @todo Consider the case when period exceeds FrameList size. -+ * Frame Rollover interrupt should be used. -+ */ -+ } else { -+ /* Scan descriptor list to complete the URB(s), then release the channel */ -+ complete_non_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status); -+ -+ release_channel_ddma(hcd, qh); -+ dwc_otg_hcd_qh_remove(hcd, qh); -+ -+ if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { -+ /* Add back to inactive non-periodic schedule on normal completion */ -+ dwc_otg_hcd_qh_add(hcd, qh); -+ } -+ -+ } -+ tr_type = dwc_otg_hcd_select_transactions(hcd); -+ if (tr_type != DWC_OTG_TRANSACTION_NONE || continue_isoc_xfer) { -+ if (continue_isoc_xfer) { -+ if (tr_type == DWC_OTG_TRANSACTION_NONE) { -+ tr_type = DWC_OTG_TRANSACTION_PERIODIC; -+ } else if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC) { -+ tr_type = DWC_OTG_TRANSACTION_ALL; -+ } -+ } -+ dwc_otg_hcd_queue_transactions(hcd, tr_type); -+ } -+} -+ -+#endif /* DWC_DEVICE_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h -@@ -0,0 +1,417 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_if.h $ -+ * $Revision: #12 $ -+ * $Date: 2011/10/26 $ -+ * $Change: 1873028 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_DEVICE_ONLY -+#ifndef __DWC_HCD_IF_H__ -+#define __DWC_HCD_IF_H__ -+ -+#include "dwc_otg_core_if.h" -+ -+/** @file -+ * This file defines DWC_OTG HCD Core API. -+ */ -+ -+struct dwc_otg_hcd; -+typedef struct dwc_otg_hcd dwc_otg_hcd_t; -+ -+struct dwc_otg_hcd_urb; -+typedef struct dwc_otg_hcd_urb dwc_otg_hcd_urb_t; -+ -+/** @name HCD Function Driver Callbacks */ -+/** @{ */ -+ -+/** This function is called whenever core switches to host mode. */ -+typedef int (*dwc_otg_hcd_start_cb_t) (dwc_otg_hcd_t * hcd); -+ -+/** This function is called when device has been disconnected */ -+typedef int (*dwc_otg_hcd_disconnect_cb_t) (dwc_otg_hcd_t * hcd); -+ -+/** Wrapper provides this function to HCD to core, so it can get hub information to which device is connected */ -+typedef int (*dwc_otg_hcd_hub_info_from_urb_cb_t) (dwc_otg_hcd_t * hcd, -+ void *urb_handle, -+ uint32_t * hub_addr, -+ uint32_t * port_addr); -+/** Via this function HCD core gets device speed */ -+typedef int (*dwc_otg_hcd_speed_from_urb_cb_t) (dwc_otg_hcd_t * hcd, -+ void *urb_handle); -+ -+/** This function is called when urb is completed */ -+typedef int (*dwc_otg_hcd_complete_urb_cb_t) (dwc_otg_hcd_t * hcd, -+ void *urb_handle, -+ dwc_otg_hcd_urb_t * dwc_otg_urb, -+ int32_t status); -+ -+/** Via this function HCD core gets b_hnp_enable parameter */ -+typedef int (*dwc_otg_hcd_get_b_hnp_enable) (dwc_otg_hcd_t * hcd); -+ -+struct dwc_otg_hcd_function_ops { -+ dwc_otg_hcd_start_cb_t start; -+ dwc_otg_hcd_disconnect_cb_t disconnect; -+ dwc_otg_hcd_hub_info_from_urb_cb_t hub_info; -+ dwc_otg_hcd_speed_from_urb_cb_t speed; -+ dwc_otg_hcd_complete_urb_cb_t complete; -+ dwc_otg_hcd_get_b_hnp_enable get_b_hnp_enable; -+}; -+/** @} */ -+ -+/** @name HCD Core API */ -+/** @{ */ -+/** This function allocates dwc_otg_hcd structure and returns pointer on it. */ -+extern dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void); -+ -+/** This function should be called to initiate HCD Core. -+ * -+ * @param hcd The HCD -+ * @param core_if The DWC_OTG Core -+ * -+ * Returns -DWC_E_NO_MEMORY if no enough memory. -+ * Returns 0 on success -+ */ -+extern int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if); -+ -+/** Frees HCD -+ * -+ * @param hcd The HCD -+ */ -+extern void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd); -+ -+/** This function should be called on every hardware interrupt. -+ * -+ * @param dwc_otg_hcd The HCD -+ * -+ * Returns non zero if interrupt is handled -+ * Return 0 if interrupt is not handled -+ */ -+extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd); -+ -+/** This function is used to handle the fast interrupt -+ * -+ */ -+extern void __attribute__ ((naked)) dwc_otg_hcd_handle_fiq(void); -+ -+/** -+ * Returns private data set by -+ * dwc_otg_hcd_set_priv_data function. -+ * -+ * @param hcd The HCD -+ */ -+extern void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd); -+ -+/** -+ * Set private data. -+ * -+ * @param hcd The HCD -+ * @param priv_data pointer to be stored in private data -+ */ -+extern void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data); -+ -+/** -+ * This function initializes the HCD Core. -+ * -+ * @param hcd The HCD -+ * @param fops The Function Driver Operations data structure containing pointers to all callbacks. -+ * -+ * Returns -DWC_E_NO_DEVICE if Core is currently is in device mode. -+ * Returns 0 on success -+ */ -+extern int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd, -+ struct dwc_otg_hcd_function_ops *fops); -+ -+/** -+ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are -+ * stopped. -+ * -+ * @param hcd The HCD -+ */ -+extern void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd); -+ -+/** -+ * Handles hub class-specific requests. -+ * -+ * @param dwc_otg_hcd The HCD -+ * @param typeReq Request Type -+ * @param wValue wValue from control request -+ * @param wIndex wIndex from control request -+ * @param buf data buffer -+ * @param wLength data buffer length -+ * -+ * Returns -DWC_E_INVALID if invalid argument is passed -+ * Returns 0 on success -+ */ -+extern int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd, -+ uint16_t typeReq, uint16_t wValue, -+ uint16_t wIndex, uint8_t * buf, -+ uint16_t wLength); -+ -+/** -+ * Returns otg port number. -+ * -+ * @param hcd The HCD -+ */ -+extern uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd); -+ -+/** -+ * Returns OTG version - either 1.3 or 2.0. -+ * -+ * @param core_if The core_if structure pointer -+ */ -+extern uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Returns 1 if currently core is acting as B host, and 0 otherwise. -+ * -+ * @param hcd The HCD -+ */ -+extern uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd); -+ -+/** -+ * Returns current frame number. -+ * -+ * @param hcd The HCD -+ */ -+extern int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * hcd); -+ -+/** -+ * Dumps hcd state. -+ * -+ * @param hcd The HCD -+ */ -+extern void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd); -+ -+/** -+ * Dump the average frame remaining at SOF. This can be used to -+ * determine average interrupt latency. Frame remaining is also shown for -+ * start transfer and two additional sample points. -+ * Currently this function is not implemented. -+ * -+ * @param hcd The HCD -+ */ -+extern void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd); -+ -+/** -+ * Sends LPM transaction to the local device. -+ * -+ * @param hcd The HCD -+ * @param devaddr Device Address -+ * @param hird Host initiated resume duration -+ * @param bRemoteWake Value of bRemoteWake field in LPM transaction -+ * -+ * Returns negative value if sending LPM transaction was not succeeded. -+ * Returns 0 on success. -+ */ -+extern int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr, -+ uint8_t hird, uint8_t bRemoteWake); -+ -+/* URB interface */ -+ -+/** -+ * Allocates memory for dwc_otg_hcd_urb structure. -+ * Allocated memory should be freed by call of DWC_FREE. -+ * -+ * @param hcd The HCD -+ * @param iso_desc_count Count of ISOC descriptors -+ * @param atomic_alloc Specefies whether to perform atomic allocation. -+ */ -+extern dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd, -+ int iso_desc_count, -+ int atomic_alloc); -+ -+/** -+ * Set pipe information in URB. -+ * -+ * @param hcd_urb DWC_OTG URB -+ * @param devaddr Device Address -+ * @param ep_num Endpoint Number -+ * @param ep_type Endpoint Type -+ * @param ep_dir Endpoint Direction -+ * @param mps Max Packet Size -+ */ -+extern void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * hcd_urb, -+ uint8_t devaddr, uint8_t ep_num, -+ uint8_t ep_type, uint8_t ep_dir, -+ uint16_t mps); -+ -+/* Transfer flags */ -+#define URB_GIVEBACK_ASAP 0x1 -+#define URB_SEND_ZERO_PACKET 0x2 -+ -+/** -+ * Sets dwc_otg_hcd_urb parameters. -+ * -+ * @param urb DWC_OTG URB allocated by dwc_otg_hcd_urb_alloc function. -+ * @param urb_handle Unique handle for request, this will be passed back -+ * to function driver in completion callback. -+ * @param buf The buffer for the data -+ * @param dma The DMA buffer for the data -+ * @param buflen Transfer length -+ * @param sp Buffer for setup data -+ * @param sp_dma DMA address of setup data buffer -+ * @param flags Transfer flags -+ * @param interval Polling interval for interrupt or isochronous transfers. -+ */ -+extern void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * urb, -+ void *urb_handle, void *buf, -+ dwc_dma_t dma, uint32_t buflen, void *sp, -+ dwc_dma_t sp_dma, uint32_t flags, -+ uint16_t interval); -+ -+/** Gets status from dwc_otg_hcd_urb -+ * -+ * @param dwc_otg_urb DWC_OTG URB -+ */ -+extern uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb); -+ -+/** Gets actual length from dwc_otg_hcd_urb -+ * -+ * @param dwc_otg_urb DWC_OTG URB -+ */ -+extern uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t * -+ dwc_otg_urb); -+ -+/** Gets error count from dwc_otg_hcd_urb. Only for ISOC URBs -+ * -+ * @param dwc_otg_urb DWC_OTG URB -+ */ -+extern uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t * -+ dwc_otg_urb); -+ -+/** Set ISOC descriptor offset and length -+ * -+ * @param dwc_otg_urb DWC_OTG URB -+ * @param desc_num ISOC descriptor number -+ * @param offset Offset from beginig of buffer. -+ * @param length Transaction length -+ */ -+extern void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb, -+ int desc_num, uint32_t offset, -+ uint32_t length); -+ -+/** Get status of ISOC descriptor, specified by desc_num -+ * -+ * @param dwc_otg_urb DWC_OTG URB -+ * @param desc_num ISOC descriptor number -+ */ -+extern uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t * -+ dwc_otg_urb, int desc_num); -+ -+/** Get actual length of ISOC descriptor, specified by desc_num -+ * -+ * @param dwc_otg_urb DWC_OTG URB -+ * @param desc_num ISOC descriptor number -+ */ -+extern uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t * -+ dwc_otg_urb, -+ int desc_num); -+ -+/** Queue URB. After transfer is completes, the complete callback will be called with the URB status -+ * -+ * @param dwc_otg_hcd The HCD -+ * @param dwc_otg_urb DWC_OTG URB -+ * @param ep_handle Out parameter for returning endpoint handle -+ * @param atomic_alloc Flag to do atomic allocation if needed -+ * -+ * Returns -DWC_E_NO_DEVICE if no device is connected. -+ * Returns -DWC_E_NO_MEMORY if there is no enough memory. -+ * Returns 0 on success. -+ */ -+extern int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * dwc_otg_hcd, -+ dwc_otg_hcd_urb_t * dwc_otg_urb, -+ void **ep_handle, int atomic_alloc); -+ -+/** De-queue the specified URB -+ * -+ * @param dwc_otg_hcd The HCD -+ * @param dwc_otg_urb DWC_OTG URB -+ */ -+extern int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * dwc_otg_hcd, -+ dwc_otg_hcd_urb_t * dwc_otg_urb); -+ -+/** Frees resources in the DWC_otg controller related to a given endpoint. -+ * Any URBs for the endpoint must already be dequeued. -+ * -+ * @param hcd The HCD -+ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function -+ * @param retry Number of retries if there are queued transfers. -+ * -+ * Returns -DWC_E_INVALID if invalid arguments are passed. -+ * Returns 0 on success -+ */ -+extern int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle, -+ int retry); -+ -+/* Resets the data toggle in qh structure. This function can be called from -+ * usb_clear_halt routine. -+ * -+ * @param hcd The HCD -+ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function -+ * -+ * Returns -DWC_E_INVALID if invalid arguments are passed. -+ * Returns 0 on success -+ */ -+extern int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle); -+ -+/** Returns 1 if status of specified port is changed and 0 otherwise. -+ * -+ * @param hcd The HCD -+ * @param port Port number -+ */ -+extern int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port); -+ -+/** Call this function to check if bandwidth was allocated for specified endpoint. -+ * Only for ISOC and INTERRUPT endpoints. -+ * -+ * @param hcd The HCD -+ * @param ep_handle Endpoint handle -+ */ -+extern int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd, -+ void *ep_handle); -+ -+/** Call this function to check if bandwidth was freed for specified endpoint. -+ * -+ * @param hcd The HCD -+ * @param ep_handle Endpoint handle -+ */ -+extern int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle); -+ -+/** Returns bandwidth allocated for specified endpoint in microseconds. -+ * Only for ISOC and INTERRUPT endpoints. -+ * -+ * @param hcd The HCD -+ * @param ep_handle Endpoint handle -+ */ -+extern uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd, -+ void *ep_handle); -+ -+/** @} */ -+ -+#endif /* __DWC_HCD_IF_H__ */ -+#endif /* DWC_DEVICE_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c -@@ -0,0 +1,2727 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $ -+ * $Revision: #89 $ -+ * $Date: 2011/10/20 $ -+ * $Change: 1869487 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_DEVICE_ONLY -+ -+#include "dwc_otg_hcd.h" -+#include "dwc_otg_regs.h" -+ -+#include -+#include -+ -+ -+extern bool microframe_schedule; -+ -+/** @file -+ * This file contains the implementation of the HCD Interrupt handlers. -+ */ -+ -+int fiq_done, int_done; -+ -+#ifdef FIQ_DEBUG -+char buffer[1000*16]; -+int wptr; -+void notrace _fiq_print(FIQDBG_T dbg_lvl, char *fmt, ...) -+{ -+ FIQDBG_T dbg_lvl_req = FIQDBG_PORTHUB; -+ va_list args; -+ char text[17]; -+ hfnum_data_t hfnum = { .d32 = FIQ_READ(dwc_regs_base + 0x408) }; -+ -+ if(dbg_lvl & dbg_lvl_req || dbg_lvl == FIQDBG_ERR) -+ { -+ local_fiq_disable(); -+ snprintf(text, 9, "%4d%d:%d ", hfnum.b.frnum/8, hfnum.b.frnum%8, 8 - hfnum.b.frrem/937); -+ va_start(args, fmt); -+ vsnprintf(text+8, 9, fmt, args); -+ va_end(args); -+ -+ memcpy(buffer + wptr, text, 16); -+ wptr = (wptr + 16) % sizeof(buffer); -+ local_fiq_enable(); -+ } -+} -+#endif -+ -+/** This function handles interrupts for the HCD. */ -+int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ int retval = 0; -+ static int last_time; -+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; -+ gintsts_data_t gintsts; -+ gintmsk_data_t gintmsk; -+ hfnum_data_t hfnum; -+ haintmsk_data_t haintmsk; -+ -+#ifdef DEBUG -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ -+#endif -+ -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); -+ -+ /* Exit from ISR if core is hibernated */ -+ if (core_if->hibernation_suspend == 1) { -+ goto exit_handler_routine; -+ } -+ DWC_SPINLOCK(dwc_otg_hcd->lock); -+ /* Check if HOST Mode */ -+ if (dwc_otg_is_host_mode(core_if)) { -+ if (fiq_enable) { -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock); -+ /* Pull in from the FIQ's disabled mask */ -+ gintmsk.d32 = gintmsk.d32 | ~(dwc_otg_hcd->fiq_state->gintmsk_saved.d32); -+ dwc_otg_hcd->fiq_state->gintmsk_saved.d32 = ~0; -+ } -+ -+ if (fiq_fsm_enable && ( 0x0000FFFF & ~(dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint))) { -+ gintsts.b.hcintr = 1; -+ } -+ -+ /* Danger will robinson: fake a SOF if necessary */ -+ if (fiq_fsm_enable && (dwc_otg_hcd->fiq_state->gintmsk_saved.b.sofintr == 1)) { -+ gintsts.b.sofintr = 1; -+ } -+ gintsts.d32 &= gintmsk.d32; -+ -+ if (fiq_enable) { -+ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } -+ -+ if (!gintsts.d32) { -+ goto exit_handler_routine; -+ } -+ -+#ifdef DEBUG -+ // We should be OK doing this because the common interrupts should already have been serviced -+ /* Don't print debug message in the interrupt handler on SOF */ -+#ifndef DEBUG_SOF -+ if (gintsts.d32 != DWC_SOF_INTR_MASK) -+#endif -+ DWC_DEBUGPL(DBG_HCDI, "\n"); -+#endif -+ -+#ifdef DEBUG -+#ifndef DEBUG_SOF -+ if (gintsts.d32 != DWC_SOF_INTR_MASK) -+#endif -+ DWC_DEBUGPL(DBG_HCDI, -+ "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x core_if=%p\n", -+ gintsts.d32, core_if); -+#endif -+ hfnum.d32 = DWC_READ_REG32(&dwc_otg_hcd->core_if->host_if->host_global_regs->hfnum); -+ if (gintsts.b.sofintr) { -+ retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd); -+ } -+ -+ if (gintsts.b.rxstsqlvl) { -+ retval |= -+ dwc_otg_hcd_handle_rx_status_q_level_intr -+ (dwc_otg_hcd); -+ } -+ if (gintsts.b.nptxfempty) { -+ retval |= -+ dwc_otg_hcd_handle_np_tx_fifo_empty_intr -+ (dwc_otg_hcd); -+ } -+ if (gintsts.b.i2cintr) { -+ /** @todo Implement i2cintr handler. */ -+ } -+ if (gintsts.b.portintr) { -+ -+ gintmsk_data_t gintmsk = { .b.portintr = 1}; -+ retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd); -+ if (fiq_enable) { -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock); -+ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0, gintmsk.d32); -+ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } else { -+ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0, gintmsk.d32); -+ } -+ } -+ if (gintsts.b.hcintr) { -+ retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd); -+ } -+ if (gintsts.b.ptxfempty) { -+ retval |= -+ dwc_otg_hcd_handle_perio_tx_fifo_empty_intr -+ (dwc_otg_hcd); -+ } -+#ifdef DEBUG -+#ifndef DEBUG_SOF -+ if (gintsts.d32 != DWC_SOF_INTR_MASK) -+#endif -+ { -+ DWC_DEBUGPL(DBG_HCDI, -+ "DWC OTG HCD Finished Servicing Interrupts\n"); -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n", -+ DWC_READ_REG32(&global_regs->gintsts)); -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n", -+ DWC_READ_REG32(&global_regs->gintmsk)); -+ } -+#endif -+ -+#ifdef DEBUG -+#ifndef DEBUG_SOF -+ if (gintsts.d32 != DWC_SOF_INTR_MASK) -+#endif -+ DWC_DEBUGPL(DBG_HCDI, "\n"); -+#endif -+ -+ } -+ -+exit_handler_routine: -+ if (fiq_enable) { -+ gintmsk_data_t gintmsk_new; -+ haintmsk_data_t haintmsk_new; -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock); -+ gintmsk_new.d32 = *(volatile uint32_t *)&dwc_otg_hcd->fiq_state->gintmsk_saved.d32; -+ if(fiq_fsm_enable) -+ haintmsk_new.d32 = *(volatile uint32_t *)&dwc_otg_hcd->fiq_state->haintmsk_saved.d32; -+ else -+ haintmsk_new.d32 = 0x0000FFFF; -+ -+ /* The FIQ could have sneaked another interrupt in. If so, don't clear MPHI */ -+ if ((gintmsk_new.d32 == ~0) && (haintmsk_new.d32 == 0x0000FFFF)) { -+ DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.intstat, (1<<16)); -+ if (dwc_otg_hcd->fiq_state->mphi_int_count >= 50) { -+ fiq_print(FIQDBG_INT, dwc_otg_hcd->fiq_state, "MPHI CLR"); -+ DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl, ((1<<31) + (1<<16))); -+ while (!(DWC_READ_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & (1 << 17))) -+ ; -+ DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl, (1<<31)); -+ dwc_otg_hcd->fiq_state->mphi_int_count = 0; -+ } -+ int_done++; -+ } -+ haintmsk.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk); -+ /* Re-enable interrupts that the FIQ masked (first time round) */ -+ FIQ_WRITE(dwc_otg_hcd->fiq_state->dwc_regs_base + GINTMSK, gintmsk.d32); -+ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock); -+ local_fiq_enable(); -+ -+ if ((jiffies / HZ) > last_time) { -+ //dwc_otg_qh_t *qh; -+ //dwc_list_link_t *cur; -+ /* Once a second output the fiq and irq numbers, useful for debug */ -+ last_time = jiffies / HZ; -+ // DWC_WARN("np_kick=%d AHC=%d sched_frame=%d cur_frame=%d int_done=%d fiq_done=%d", -+ // dwc_otg_hcd->fiq_state->kick_np_queues, dwc_otg_hcd->available_host_channels, -+ // dwc_otg_hcd->fiq_state->next_sched_frame, hfnum.b.frnum, int_done, dwc_otg_hcd->fiq_state->fiq_done); -+ //printk(KERN_WARNING "Periodic queues:\n"); -+ } -+ } -+ -+ DWC_SPINUNLOCK(dwc_otg_hcd->lock); -+ return retval; -+} -+ -+#ifdef DWC_TRACK_MISSED_SOFS -+ -+#warning Compiling code to track missed SOFs -+#define FRAME_NUM_ARRAY_SIZE 1000 -+/** -+ * This function is for debug only. -+ */ -+static inline void track_missed_sofs(uint16_t curr_frame_number) -+{ -+ static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE]; -+ static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE]; -+ static int frame_num_idx = 0; -+ static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM; -+ static int dumped_frame_num_array = 0; -+ -+ if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) { -+ if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != -+ curr_frame_number) { -+ frame_num_array[frame_num_idx] = curr_frame_number; -+ last_frame_num_array[frame_num_idx++] = last_frame_num; -+ } -+ } else if (!dumped_frame_num_array) { -+ int i; -+ DWC_PRINTF("Frame Last Frame\n"); -+ DWC_PRINTF("----- ----------\n"); -+ for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) { -+ DWC_PRINTF("0x%04x 0x%04x\n", -+ frame_num_array[i], last_frame_num_array[i]); -+ } -+ dumped_frame_num_array = 1; -+ } -+ last_frame_num = curr_frame_number; -+} -+#endif -+ -+/** -+ * Handles the start-of-frame interrupt in host mode. Non-periodic -+ * transactions may be queued to the DWC_otg controller for the current -+ * (micro)frame. Periodic transactions may be queued to the controller for the -+ * next (micro)frame. -+ */ -+int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * hcd) -+{ -+ hfnum_data_t hfnum; -+ gintsts_data_t gintsts = { .d32 = 0 }; -+ dwc_list_link_t *qh_entry; -+ dwc_otg_qh_t *qh; -+ dwc_otg_transaction_type_e tr_type; -+ int did_something = 0; -+ int32_t next_sched_frame = -1; -+ -+ hfnum.d32 = -+ DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum); -+ -+#ifdef DEBUG_SOF -+ DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n"); -+#endif -+ hcd->frame_number = hfnum.b.frnum; -+ -+#ifdef DEBUG -+ hcd->frrem_accum += hfnum.b.frrem; -+ hcd->frrem_samples++; -+#endif -+ -+#ifdef DWC_TRACK_MISSED_SOFS -+ track_missed_sofs(hcd->frame_number); -+#endif -+ /* Determine whether any periodic QHs should be executed. */ -+ qh_entry = DWC_LIST_FIRST(&hcd->periodic_sched_inactive); -+ while (qh_entry != &hcd->periodic_sched_inactive) { -+ qh = DWC_LIST_ENTRY(qh_entry, dwc_otg_qh_t, qh_list_entry); -+ qh_entry = qh_entry->next; -+ if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) { -+ -+ /* -+ * Move QH to the ready list to be executed next -+ * (micro)frame. -+ */ -+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready, -+ &qh->qh_list_entry); -+ -+ did_something = 1; -+ } -+ else -+ { -+ if(next_sched_frame < 0 || dwc_frame_num_le(qh->sched_frame, next_sched_frame)) -+ { -+ next_sched_frame = qh->sched_frame; -+ } -+ } -+ } -+ if (fiq_enable) -+ hcd->fiq_state->next_sched_frame = next_sched_frame; -+ -+ tr_type = dwc_otg_hcd_select_transactions(hcd); -+ if (tr_type != DWC_OTG_TRANSACTION_NONE) { -+ dwc_otg_hcd_queue_transactions(hcd, tr_type); -+ did_something = 1; -+ } -+ -+ /* Clear interrupt - but do not trample on the FIQ sof */ -+ if (!fiq_fsm_enable) { -+ gintsts.b.sofintr = 1; -+ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32); -+ } -+ return 1; -+} -+ -+/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at -+ * least one packet in the Rx FIFO. The packets are moved from the FIFO to -+ * memory if the DWC_otg controller is operating in Slave mode. */ -+int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ host_grxsts_data_t grxsts; -+ dwc_hc_t *hc = NULL; -+ -+ DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n"); -+ -+ grxsts.d32 = -+ DWC_READ_REG32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp); -+ -+ hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum]; -+ if (!hc) { -+ DWC_ERROR("Unable to get corresponding channel\n"); -+ return 0; -+ } -+ -+ /* Packet Status */ -+ DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum); -+ DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt); -+ DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, -+ hc->data_pid_start); -+ DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts); -+ -+ switch (grxsts.b.pktsts) { -+ case DWC_GRXSTS_PKTSTS_IN: -+ /* Read the data into the host buffer. */ -+ if (grxsts.b.bcnt > 0) { -+ dwc_otg_read_packet(dwc_otg_hcd->core_if, -+ hc->xfer_buff, grxsts.b.bcnt); -+ -+ /* Update the HC fields for the next packet received. */ -+ hc->xfer_count += grxsts.b.bcnt; -+ hc->xfer_buff += grxsts.b.bcnt; -+ } -+ -+ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: -+ case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR: -+ case DWC_GRXSTS_PKTSTS_CH_HALTED: -+ /* Handled in interrupt, just ignore data */ -+ break; -+ default: -+ DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", -+ grxsts.b.pktsts); -+ break; -+ } -+ -+ return 1; -+} -+ -+/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More -+ * data packets may be written to the FIFO for OUT transfers. More requests -+ * may be written to the non-periodic request queue for IN transfers. This -+ * interrupt is enabled only in Slave mode. */ -+int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n"); -+ dwc_otg_hcd_queue_transactions(dwc_otg_hcd, -+ DWC_OTG_TRANSACTION_NON_PERIODIC); -+ return 1; -+} -+ -+/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data -+ * packets may be written to the FIFO for OUT transfers. More requests may be -+ * written to the periodic request queue for IN transfers. This interrupt is -+ * enabled only in Slave mode. */ -+int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n"); -+ dwc_otg_hcd_queue_transactions(dwc_otg_hcd, -+ DWC_OTG_TRANSACTION_PERIODIC); -+ return 1; -+} -+ -+/** There are multiple conditions that can cause a port interrupt. This function -+ * determines which interrupt conditions have occurred and handles them -+ * appropriately. */ -+int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ int retval = 0; -+ hprt0_data_t hprt0; -+ hprt0_data_t hprt0_modify; -+ -+ hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); -+ hprt0_modify.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); -+ -+ /* Clear appropriate bits in HPRT0 to clear the interrupt bit in -+ * GINTSTS */ -+ -+ hprt0_modify.b.prtena = 0; -+ hprt0_modify.b.prtconndet = 0; -+ hprt0_modify.b.prtenchng = 0; -+ hprt0_modify.b.prtovrcurrchng = 0; -+ -+ /* Port Connect Detected -+ * Set flag and clear if detected */ -+ if (dwc_otg_hcd->core_if->hibernation_suspend == 1) { -+ // Dont modify port status if we are in hibernation state -+ hprt0_modify.b.prtconndet = 1; -+ hprt0_modify.b.prtenchng = 1; -+ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32); -+ hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); -+ return retval; -+ } -+ -+ if (hprt0.b.prtconndet) { -+ /** @todo - check if steps performed in 'else' block should be perfromed regardles adp */ -+ if (dwc_otg_hcd->core_if->adp_enable && -+ dwc_otg_hcd->core_if->adp.vbuson_timer_started == 1) { -+ DWC_PRINTF("PORT CONNECT DETECTED ----------------\n"); -+ DWC_TIMER_CANCEL(dwc_otg_hcd->core_if->adp.vbuson_timer); -+ dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0; -+ /* TODO - check if this is required, as -+ * host initialization was already performed -+ * after initial ADP probing -+ */ -+ /*dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0; -+ dwc_otg_core_init(dwc_otg_hcd->core_if); -+ dwc_otg_enable_global_interrupts(dwc_otg_hcd->core_if); -+ cil_hcd_start(dwc_otg_hcd->core_if);*/ -+ } else { -+ -+ DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x " -+ "Port Connect Detected--\n", hprt0.d32); -+ dwc_otg_hcd->flags.b.port_connect_status_change = 1; -+ dwc_otg_hcd->flags.b.port_connect_status = 1; -+ hprt0_modify.b.prtconndet = 1; -+ -+ /* B-Device has connected, Delete the connection timer. */ -+ DWC_TIMER_CANCEL(dwc_otg_hcd->conn_timer); -+ } -+ /* The Hub driver asserts a reset when it sees port connect -+ * status change flag */ -+ retval |= 1; -+ } -+ -+ /* Port Enable Changed -+ * Clear if detected - Set internal flag if disabled */ -+ if (hprt0.b.prtenchng) { -+ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " -+ "Port Enable Changed--\n", hprt0.d32); -+ hprt0_modify.b.prtenchng = 1; -+ if (hprt0.b.prtena == 1) { -+ hfir_data_t hfir; -+ int do_reset = 0; -+ dwc_otg_core_params_t *params = -+ dwc_otg_hcd->core_if->core_params; -+ dwc_otg_core_global_regs_t *global_regs = -+ dwc_otg_hcd->core_if->core_global_regs; -+ dwc_otg_host_if_t *host_if = -+ dwc_otg_hcd->core_if->host_if; -+ -+ /* Every time when port enables calculate -+ * HFIR.FrInterval -+ */ -+ hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir); -+ hfir.b.frint = calc_frame_interval(dwc_otg_hcd->core_if); -+ DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32); -+ -+ /* Check if we need to adjust the PHY clock speed for -+ * low power and adjust it */ -+ if (params->host_support_fs_ls_low_power) { -+ gusbcfg_data_t usbcfg; -+ -+ usbcfg.d32 = -+ DWC_READ_REG32(&global_regs->gusbcfg); -+ -+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED -+ || hprt0.b.prtspd == -+ DWC_HPRT0_PRTSPD_FULL_SPEED) { -+ /* -+ * Low power -+ */ -+ hcfg_data_t hcfg; -+ if (usbcfg.b.phylpwrclksel == 0) { -+ /* Set PHY low power clock select for FS/LS devices */ -+ usbcfg.b.phylpwrclksel = 1; -+ DWC_WRITE_REG32 -+ (&global_regs->gusbcfg, -+ usbcfg.d32); -+ do_reset = 1; -+ } -+ -+ hcfg.d32 = -+ DWC_READ_REG32 -+ (&host_if->host_global_regs->hcfg); -+ -+ if (hprt0.b.prtspd == -+ DWC_HPRT0_PRTSPD_LOW_SPEED -+ && params->host_ls_low_power_phy_clk -+ == -+ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) -+ { -+ /* 6 MHZ */ -+ DWC_DEBUGPL(DBG_CIL, -+ "FS_PHY programming HCFG to 6 MHz (Low Power)\n"); -+ if (hcfg.b.fslspclksel != -+ DWC_HCFG_6_MHZ) { -+ hcfg.b.fslspclksel = -+ DWC_HCFG_6_MHZ; -+ DWC_WRITE_REG32 -+ (&host_if->host_global_regs->hcfg, -+ hcfg.d32); -+ do_reset = 1; -+ } -+ } else { -+ /* 48 MHZ */ -+ DWC_DEBUGPL(DBG_CIL, -+ "FS_PHY programming HCFG to 48 MHz ()\n"); -+ if (hcfg.b.fslspclksel != -+ DWC_HCFG_48_MHZ) { -+ hcfg.b.fslspclksel = -+ DWC_HCFG_48_MHZ; -+ DWC_WRITE_REG32 -+ (&host_if->host_global_regs->hcfg, -+ hcfg.d32); -+ do_reset = 1; -+ } -+ } -+ } else { -+ /* -+ * Not low power -+ */ -+ if (usbcfg.b.phylpwrclksel == 1) { -+ usbcfg.b.phylpwrclksel = 0; -+ DWC_WRITE_REG32 -+ (&global_regs->gusbcfg, -+ usbcfg.d32); -+ do_reset = 1; -+ } -+ } -+ -+ if (do_reset) { -+ DWC_TASK_SCHEDULE(dwc_otg_hcd->reset_tasklet); -+ } -+ } -+ -+ if (!do_reset) { -+ /* Port has been enabled set the reset change flag */ -+ dwc_otg_hcd->flags.b.port_reset_change = 1; -+ } -+ } else { -+ dwc_otg_hcd->flags.b.port_enable_change = 1; -+ } -+ retval |= 1; -+ } -+ -+ /** Overcurrent Change Interrupt */ -+ if (hprt0.b.prtovrcurrchng) { -+ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " -+ "Port Overcurrent Changed--\n", hprt0.d32); -+ dwc_otg_hcd->flags.b.port_over_current_change = 1; -+ hprt0_modify.b.prtovrcurrchng = 1; -+ retval |= 1; -+ } -+ -+ /* Clear Port Interrupts */ -+ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32); -+ -+ return retval; -+} -+ -+/** This interrupt indicates that one or more host channels has a pending -+ * interrupt. There are multiple conditions that can cause each host channel -+ * interrupt. This function determines which conditions have occurred for each -+ * host channel interrupt and handles them appropriately. */ -+int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ int i; -+ int retval = 0; -+ haint_data_t haint = { .d32 = 0 } ; -+ -+ /* Clear appropriate bits in HCINTn to clear the interrupt bit in -+ * GINTSTS */ -+ -+ if (!fiq_fsm_enable) -+ haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if); -+ -+ // Overwrite with saved interrupts from fiq handler -+ if(fiq_fsm_enable) -+ { -+ /* check the mask? */ -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock); -+ haint.b2.chint |= ~(dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint); -+ dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint = ~0; -+ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } -+ -+ for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) { -+ if (haint.b2.chint & (1 << i)) { -+ retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i); -+ } -+ } -+ -+ return retval; -+} -+ -+/** -+ * Gets the actual length of a transfer after the transfer halts. _halt_status -+ * holds the reason for the halt. -+ * -+ * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE, -+ * *short_read is set to 1 upon return if less than the requested -+ * number of bytes were transferred. Otherwise, *short_read is set to 0 upon -+ * return. short_read may also be NULL on entry, in which case it remains -+ * unchanged. -+ */ -+static uint32_t get_actual_xfer_length(dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd, -+ dwc_otg_halt_status_e halt_status, -+ int *short_read) -+{ -+ hctsiz_data_t hctsiz; -+ uint32_t length; -+ -+ if (short_read != NULL) { -+ *short_read = 0; -+ } -+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); -+ -+ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { -+ if (hc->ep_is_in) { -+ length = hc->xfer_len - hctsiz.b.xfersize; -+ if (short_read != NULL) { -+ *short_read = (hctsiz.b.xfersize != 0); -+ } -+ } else if (hc->qh->do_split) { -+ //length = split_out_xfersize[hc->hc_num]; -+ length = qtd->ssplit_out_xfer_count; -+ } else { -+ length = hc->xfer_len; -+ } -+ } else { -+ /* -+ * Must use the hctsiz.pktcnt field to determine how much data -+ * has been transferred. This field reflects the number of -+ * packets that have been transferred via the USB. This is -+ * always an integral number of packets if the transfer was -+ * halted before its normal completion. (Can't use the -+ * hctsiz.xfersize field because that reflects the number of -+ * bytes transferred via the AHB, not the USB). -+ */ -+ length = -+ (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet; -+ } -+ -+ return length; -+} -+ -+/** -+ * Updates the state of the URB after a Transfer Complete interrupt on the -+ * host channel. Updates the actual_length field of the URB based on the -+ * number of bytes transferred via the host channel. Sets the URB status -+ * if the data transfer is finished. -+ * -+ * @return 1 if the data transfer specified by the URB is completely finished, -+ * 0 otherwise. -+ */ -+static int update_urb_state_xfer_comp(dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_hcd_urb_t * urb, -+ dwc_otg_qtd_t * qtd) -+{ -+ int xfer_done = 0; -+ int short_read = 0; -+ -+ int xfer_length; -+ -+ xfer_length = get_actual_xfer_length(hc, hc_regs, qtd, -+ DWC_OTG_HC_XFER_COMPLETE, -+ &short_read); -+ -+ if (urb->actual_length + xfer_length > urb->length) { -+ printk_once(KERN_DEBUG "dwc_otg: DEVICE:%03d : %s:%d:trimming xfer length\n", -+ hc->dev_addr, __func__, __LINE__); -+ xfer_length = urb->length - urb->actual_length; -+ } -+ -+ /* non DWORD-aligned buffer case handling. */ -+ if (hc->align_buff && xfer_length && hc->ep_is_in) { -+ dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf, -+ xfer_length); -+ } -+ -+ urb->actual_length += xfer_length; -+ -+ if (xfer_length && (hc->ep_type == DWC_OTG_EP_TYPE_BULK) && -+ (urb->flags & URB_SEND_ZERO_PACKET) -+ && (urb->actual_length == urb->length) -+ && !(urb->length % hc->max_packet)) { -+ xfer_done = 0; -+ } else if (short_read || urb->actual_length >= urb->length) { -+ xfer_done = 1; -+ urb->status = 0; -+ } -+ -+#ifdef DEBUG -+ { -+ hctsiz_data_t hctsiz; -+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); -+ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", -+ __func__, (hc->ep_is_in ? "IN" : "OUT"), -+ hc->hc_num); -+ DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", hc->xfer_len); -+ DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", -+ hctsiz.b.xfersize); -+ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", -+ urb->length); -+ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", -+ urb->actual_length); -+ DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n", -+ short_read, xfer_done); -+ } -+#endif -+ -+ return xfer_done; -+} -+ -+/* -+ * Save the starting data toggle for the next transfer. The data toggle is -+ * saved in the QH for non-control transfers and it's saved in the QTD for -+ * control transfers. -+ */ -+void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, dwc_otg_qtd_t * qtd) -+{ -+ hctsiz_data_t hctsiz; -+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); -+ -+ if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) { -+ dwc_otg_qh_t *qh = hc->qh; -+ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { -+ qh->data_toggle = DWC_OTG_HC_PID_DATA0; -+ } else { -+ qh->data_toggle = DWC_OTG_HC_PID_DATA1; -+ } -+ } else { -+ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { -+ qtd->data_toggle = DWC_OTG_HC_PID_DATA0; -+ } else { -+ qtd->data_toggle = DWC_OTG_HC_PID_DATA1; -+ } -+ } -+} -+ -+/** -+ * Updates the state of an Isochronous URB when the transfer is stopped for -+ * any reason. The fields of the current entry in the frame descriptor array -+ * are set based on the transfer state and the input _halt_status. Completes -+ * the Isochronous URB if all the URB frames have been completed. -+ * -+ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be -+ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE. -+ */ -+static dwc_otg_halt_status_e -+update_isoc_urb_state(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status) -+{ -+ dwc_otg_hcd_urb_t *urb = qtd->urb; -+ dwc_otg_halt_status_e ret_val = halt_status; -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc; -+ -+ frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; -+ switch (halt_status) { -+ case DWC_OTG_HC_XFER_COMPLETE: -+ frame_desc->status = 0; -+ frame_desc->actual_length = -+ get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL); -+ -+ /* non DWORD-aligned buffer case handling. */ -+ if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) { -+ dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset, -+ hc->qh->dw_align_buf, frame_desc->actual_length); -+ } -+ -+ break; -+ case DWC_OTG_HC_XFER_FRAME_OVERRUN: -+ urb->error_count++; -+ if (hc->ep_is_in) { -+ frame_desc->status = -DWC_E_NO_STREAM_RES; -+ } else { -+ frame_desc->status = -DWC_E_COMMUNICATION; -+ } -+ frame_desc->actual_length = 0; -+ break; -+ case DWC_OTG_HC_XFER_BABBLE_ERR: -+ urb->error_count++; -+ frame_desc->status = -DWC_E_OVERFLOW; -+ /* Don't need to update actual_length in this case. */ -+ break; -+ case DWC_OTG_HC_XFER_XACT_ERR: -+ urb->error_count++; -+ frame_desc->status = -DWC_E_PROTOCOL; -+ frame_desc->actual_length = -+ get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL); -+ -+ /* non DWORD-aligned buffer case handling. */ -+ if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) { -+ dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset, -+ hc->qh->dw_align_buf, frame_desc->actual_length); -+ } -+ /* Skip whole frame */ -+ if (hc->qh->do_split && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && -+ hc->ep_is_in && hcd->core_if->dma_enable) { -+ qtd->complete_split = 0; -+ qtd->isoc_split_offset = 0; -+ } -+ -+ break; -+ default: -+ DWC_ASSERT(1, "Unhandled _halt_status (%d)\n", halt_status); -+ break; -+ } -+ if (++qtd->isoc_frame_index == urb->packet_count) { -+ /* -+ * urb->status is not used for isoc transfers. -+ * The individual frame_desc statuses are used instead. -+ */ -+ hcd->fops->complete(hcd, urb->priv, urb, 0); -+ ret_val = DWC_OTG_HC_XFER_URB_COMPLETE; -+ } else { -+ ret_val = DWC_OTG_HC_XFER_COMPLETE; -+ } -+ return ret_val; -+} -+ -+/** -+ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic -+ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are -+ * still linked to the QH, the QH is added to the end of the inactive -+ * non-periodic schedule. For periodic QHs, removes the QH from the periodic -+ * schedule if no more QTDs are linked to the QH. -+ */ -+static void deactivate_qh(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, int free_qtd) -+{ -+ int continue_split = 0; -+ dwc_otg_qtd_t *qtd; -+ -+ DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd); -+ -+ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); -+ -+ if (qtd->complete_split) { -+ continue_split = 1; -+ } else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID || -+ qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) { -+ continue_split = 1; -+ } -+ -+ if (free_qtd) { -+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); -+ continue_split = 0; -+ } -+ -+ qh->channel = NULL; -+ dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split); -+} -+ -+/** -+ * Releases a host channel for use by other transfers. Attempts to select and -+ * queue more transactions since at least one host channel is available. -+ * -+ * @param hcd The HCD state structure. -+ * @param hc The host channel to release. -+ * @param qtd The QTD associated with the host channel. This QTD may be freed -+ * if the transfer is complete or an error has occurred. -+ * @param halt_status Reason the channel is being released. This status -+ * determines the actions taken by this function. -+ */ -+static void release_channel(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_qtd_t * qtd, -+ dwc_otg_halt_status_e halt_status) -+{ -+ dwc_otg_transaction_type_e tr_type; -+ int free_qtd; -+ dwc_irqflags_t flags; -+ dwc_spinlock_t *channel_lock = hcd->channel_lock; -+ -+ int hog_port = 0; -+ -+ DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d, xfer_len %d\n", -+ __func__, hc->hc_num, halt_status, hc->xfer_len); -+ -+ if(fiq_fsm_enable && hc->do_split) { -+ if(!hc->ep_is_in && hc->ep_type == UE_ISOCHRONOUS) { -+ if(hc->xact_pos == DWC_HCSPLIT_XACTPOS_MID || -+ hc->xact_pos == DWC_HCSPLIT_XACTPOS_BEGIN) { -+ hog_port = 0; -+ } -+ } -+ } -+ -+ switch (halt_status) { -+ case DWC_OTG_HC_XFER_URB_COMPLETE: -+ free_qtd = 1; -+ break; -+ case DWC_OTG_HC_XFER_AHB_ERR: -+ case DWC_OTG_HC_XFER_STALL: -+ case DWC_OTG_HC_XFER_BABBLE_ERR: -+ free_qtd = 1; -+ break; -+ case DWC_OTG_HC_XFER_XACT_ERR: -+ if (qtd->error_count >= 3) { -+ DWC_DEBUGPL(DBG_HCDV, -+ " Complete URB with transaction error\n"); -+ free_qtd = 1; -+ qtd->urb->status = -DWC_E_PROTOCOL; -+ hcd->fops->complete(hcd, qtd->urb->priv, -+ qtd->urb, -DWC_E_PROTOCOL); -+ } else { -+ free_qtd = 0; -+ } -+ break; -+ case DWC_OTG_HC_XFER_URB_DEQUEUE: -+ /* -+ * The QTD has already been removed and the QH has been -+ * deactivated. Don't want to do anything except release the -+ * host channel and try to queue more transfers. -+ */ -+ goto cleanup; -+ case DWC_OTG_HC_XFER_NO_HALT_STATUS: -+ free_qtd = 0; -+ break; -+ case DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE: -+ DWC_DEBUGPL(DBG_HCDV, -+ " Complete URB with I/O error\n"); -+ free_qtd = 1; -+ qtd->urb->status = -DWC_E_IO; -+ hcd->fops->complete(hcd, qtd->urb->priv, -+ qtd->urb, -DWC_E_IO); -+ break; -+ default: -+ free_qtd = 0; -+ break; -+ } -+ -+ deactivate_qh(hcd, hc->qh, free_qtd); -+ -+cleanup: -+ /* -+ * Release the host channel for use by other transfers. The cleanup -+ * function clears the channel interrupt enables and conditions, so -+ * there's no need to clear the Channel Halted interrupt separately. -+ */ -+ if (fiq_fsm_enable && hcd->fiq_state->channel[hc->hc_num].fsm != FIQ_PASSTHROUGH) -+ dwc_otg_cleanup_fiq_channel(hcd, hc->hc_num); -+ dwc_otg_hc_cleanup(hcd->core_if, hc); -+ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); -+ -+ if (!microframe_schedule) { -+ switch (hc->ep_type) { -+ case DWC_OTG_EP_TYPE_CONTROL: -+ case DWC_OTG_EP_TYPE_BULK: -+ hcd->non_periodic_channels--; -+ break; -+ -+ default: -+ /* -+ * Don't release reservations for periodic channels here. -+ * That's done when a periodic transfer is descheduled (i.e. -+ * when the QH is removed from the periodic schedule). -+ */ -+ break; -+ } -+ } else { -+ -+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); -+ hcd->available_host_channels++; -+ fiq_print(FIQDBG_INT, hcd->fiq_state, "AHC = %d ", hcd->available_host_channels); -+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); -+ } -+ -+ /* Try to queue more transfers now that there's a free channel. */ -+ tr_type = dwc_otg_hcd_select_transactions(hcd); -+ if (tr_type != DWC_OTG_TRANSACTION_NONE) { -+ dwc_otg_hcd_queue_transactions(hcd, tr_type); -+ } -+} -+ -+/** -+ * Halts a host channel. If the channel cannot be halted immediately because -+ * the request queue is full, this function ensures that the FIFO empty -+ * interrupt for the appropriate queue is enabled so that the halt request can -+ * be queued when there is space in the request queue. -+ * -+ * This function may also be called in DMA mode. In that case, the channel is -+ * simply released since the core always halts the channel automatically in -+ * DMA mode. -+ */ -+static void halt_channel(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status) -+{ -+ if (hcd->core_if->dma_enable) { -+ release_channel(hcd, hc, qtd, halt_status); -+ return; -+ } -+ -+ /* Slave mode processing... */ -+ dwc_otg_hc_halt(hcd->core_if, hc, halt_status); -+ -+ if (hc->halt_on_queue) { -+ gintmsk_data_t gintmsk = {.d32 = 0 }; -+ dwc_otg_core_global_regs_t *global_regs; -+ global_regs = hcd->core_if->core_global_regs; -+ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || -+ hc->ep_type == DWC_OTG_EP_TYPE_BULK) { -+ /* -+ * Make sure the Non-periodic Tx FIFO empty interrupt -+ * is enabled so that the non-periodic schedule will -+ * be processed. -+ */ -+ gintmsk.b.nptxfempty = 1; -+ if (fiq_enable) { -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&hcd->fiq_state->lock); -+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); -+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } else { -+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); -+ } -+ } else { -+ /* -+ * Move the QH from the periodic queued schedule to -+ * the periodic assigned schedule. This allows the -+ * halt to be queued when the periodic schedule is -+ * processed. -+ */ -+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, -+ &hc->qh->qh_list_entry); -+ -+ /* -+ * Make sure the Periodic Tx FIFO Empty interrupt is -+ * enabled so that the periodic schedule will be -+ * processed. -+ */ -+ gintmsk.b.ptxfempty = 1; -+ if (fiq_enable) { -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&hcd->fiq_state->lock); -+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); -+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } else { -+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); -+ } -+ } -+ } -+} -+ -+/** -+ * Performs common cleanup for non-periodic transfers after a Transfer -+ * Complete interrupt. This function should be called after any endpoint type -+ * specific handling is finished to release the host channel. -+ */ -+static void complete_non_periodic_xfer(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd, -+ dwc_otg_halt_status_e halt_status) -+{ -+ hcint_data_t hcint; -+ -+ qtd->error_count = 0; -+ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ if (hcint.b.nyet) { -+ /* -+ * Got a NYET on the last transaction of the transfer. This -+ * means that the endpoint should be in the PING state at the -+ * beginning of the next transfer. -+ */ -+ hc->qh->ping_state = 1; -+ clear_hc_int(hc_regs, nyet); -+ } -+ -+ /* -+ * Always halt and release the host channel to make it available for -+ * more transfers. There may still be more phases for a control -+ * transfer or more data packets for a bulk transfer at this point, -+ * but the host channel is still halted. A channel will be reassigned -+ * to the transfer when the non-periodic schedule is processed after -+ * the channel is released. This allows transactions to be queued -+ * properly via dwc_otg_hcd_queue_transactions, which also enables the -+ * Tx FIFO Empty interrupt if necessary. -+ */ -+ if (hc->ep_is_in) { -+ /* -+ * IN transfers in Slave mode require an explicit disable to -+ * halt the channel. (In DMA mode, this call simply releases -+ * the channel.) -+ */ -+ halt_channel(hcd, hc, qtd, halt_status); -+ } else { -+ /* -+ * The channel is automatically disabled by the core for OUT -+ * transfers in Slave mode. -+ */ -+ release_channel(hcd, hc, qtd, halt_status); -+ } -+} -+ -+/** -+ * Performs common cleanup for periodic transfers after a Transfer Complete -+ * interrupt. This function should be called after any endpoint type specific -+ * handling is finished to release the host channel. -+ */ -+static void complete_periodic_xfer(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd, -+ dwc_otg_halt_status_e halt_status) -+{ -+ hctsiz_data_t hctsiz; -+ qtd->error_count = 0; -+ -+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); -+ if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) { -+ /* Core halts channel in these cases. */ -+ release_channel(hcd, hc, qtd, halt_status); -+ } else { -+ /* Flush any outstanding requests from the Tx queue. */ -+ halt_channel(hcd, hc, qtd, halt_status); -+ } -+} -+ -+static int32_t handle_xfercomp_isoc_split_in(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ uint32_t len; -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc; -+ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; -+ -+ len = get_actual_xfer_length(hc, hc_regs, qtd, -+ DWC_OTG_HC_XFER_COMPLETE, NULL); -+ -+ if (!len) { -+ qtd->complete_split = 0; -+ qtd->isoc_split_offset = 0; -+ return 0; -+ } -+ frame_desc->actual_length += len; -+ -+ if (hc->align_buff && len) -+ dwc_memcpy(qtd->urb->buf + frame_desc->offset + -+ qtd->isoc_split_offset, hc->qh->dw_align_buf, len); -+ qtd->isoc_split_offset += len; -+ -+ if (frame_desc->length == frame_desc->actual_length) { -+ frame_desc->status = 0; -+ qtd->isoc_frame_index++; -+ qtd->complete_split = 0; -+ qtd->isoc_split_offset = 0; -+ } -+ -+ if (qtd->isoc_frame_index == qtd->urb->packet_count) { -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } else { -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); -+ } -+ -+ return 1; /* Indicates that channel released */ -+} -+ -+/** -+ * Handles a host channel Transfer Complete interrupt. This handler may be -+ * called in either DMA mode or Slave mode. -+ */ -+static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ int urb_xfer_done; -+ dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE; -+ dwc_otg_hcd_urb_t *urb = qtd->urb; -+ int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); -+ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "Transfer Complete--\n", hc->hc_num); -+ -+ if (hcd->core_if->dma_desc_enable) { -+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, halt_status); -+ if (pipe_type == UE_ISOCHRONOUS) { -+ /* Do not disable the interrupt, just clear it */ -+ clear_hc_int(hc_regs, xfercomp); -+ return 1; -+ } -+ goto handle_xfercomp_done; -+ } -+ -+ /* -+ * Handle xfer complete on CSPLIT. -+ */ -+ -+ if (hc->qh->do_split) { -+ if ((hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && hc->ep_is_in -+ && hcd->core_if->dma_enable) { -+ if (qtd->complete_split -+ && handle_xfercomp_isoc_split_in(hcd, hc, hc_regs, -+ qtd)) -+ goto handle_xfercomp_done; -+ } else { -+ qtd->complete_split = 0; -+ } -+ } -+ -+ /* Update the QTD and URB states. */ -+ switch (pipe_type) { -+ case UE_CONTROL: -+ switch (qtd->control_phase) { -+ case DWC_OTG_CONTROL_SETUP: -+ if (urb->length > 0) { -+ qtd->control_phase = DWC_OTG_CONTROL_DATA; -+ } else { -+ qtd->control_phase = DWC_OTG_CONTROL_STATUS; -+ } -+ DWC_DEBUGPL(DBG_HCDV, -+ " Control setup transaction done\n"); -+ halt_status = DWC_OTG_HC_XFER_COMPLETE; -+ break; -+ case DWC_OTG_CONTROL_DATA:{ -+ urb_xfer_done = -+ update_urb_state_xfer_comp(hc, hc_regs, urb, -+ qtd); -+ if (urb_xfer_done) { -+ qtd->control_phase = -+ DWC_OTG_CONTROL_STATUS; -+ DWC_DEBUGPL(DBG_HCDV, -+ " Control data transfer done\n"); -+ } else { -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ } -+ halt_status = DWC_OTG_HC_XFER_COMPLETE; -+ break; -+ } -+ case DWC_OTG_CONTROL_STATUS: -+ DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n"); -+ if (urb->status == -DWC_E_IN_PROGRESS) { -+ urb->status = 0; -+ } -+ hcd->fops->complete(hcd, urb->priv, urb, urb->status); -+ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; -+ break; -+ } -+ -+ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); -+ break; -+ case UE_BULK: -+ DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n"); -+ urb_xfer_done = -+ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); -+ if (urb_xfer_done) { -+ hcd->fops->complete(hcd, urb->priv, urb, urb->status); -+ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; -+ } else { -+ halt_status = DWC_OTG_HC_XFER_COMPLETE; -+ } -+ -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); -+ break; -+ case UE_INTERRUPT: -+ DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n"); -+ urb_xfer_done = -+ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); -+ -+ /* -+ * Interrupt URB is done on the first transfer complete -+ * interrupt. -+ */ -+ if (urb_xfer_done) { -+ hcd->fops->complete(hcd, urb->priv, urb, urb->status); -+ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; -+ } else { -+ halt_status = DWC_OTG_HC_XFER_COMPLETE; -+ } -+ -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); -+ break; -+ case UE_ISOCHRONOUS: -+ DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n"); -+ if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) { -+ halt_status = -+ update_isoc_urb_state(hcd, hc, hc_regs, qtd, -+ DWC_OTG_HC_XFER_COMPLETE); -+ } -+ complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); -+ break; -+ } -+ -+handle_xfercomp_done: -+ disable_hc_int(hc_regs, xfercompl); -+ -+ return 1; -+} -+ -+/** -+ * Handles a host channel STALL interrupt. This handler may be called in -+ * either DMA mode or Slave mode. -+ */ -+static int32_t handle_hc_stall_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ dwc_otg_hcd_urb_t *urb = qtd->urb; -+ int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); -+ -+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " -+ "STALL Received--\n", hc->hc_num); -+ -+ if (hcd->core_if->dma_desc_enable) { -+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, DWC_OTG_HC_XFER_STALL); -+ goto handle_stall_done; -+ } -+ -+ if (pipe_type == UE_CONTROL) { -+ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE); -+ } -+ -+ if (pipe_type == UE_BULK || pipe_type == UE_INTERRUPT) { -+ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE); -+ /* -+ * USB protocol requires resetting the data toggle for bulk -+ * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT) -+ * setup command is issued to the endpoint. Anticipate the -+ * CLEAR_FEATURE command since a STALL has occurred and reset -+ * the data toggle now. -+ */ -+ hc->qh->data_toggle = 0; -+ } -+ -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL); -+ -+handle_stall_done: -+ disable_hc_int(hc_regs, stall); -+ -+ return 1; -+} -+ -+/* -+ * Updates the state of the URB when a transfer has been stopped due to an -+ * abnormal condition before the transfer completes. Modifies the -+ * actual_length field of the URB to reflect the number of bytes that have -+ * actually been transferred via the host channel. -+ */ -+static void update_urb_state_xfer_intr(dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_hcd_urb_t * urb, -+ dwc_otg_qtd_t * qtd, -+ dwc_otg_halt_status_e halt_status) -+{ -+ uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd, -+ halt_status, NULL); -+ -+ if (urb->actual_length + bytes_transferred > urb->length) { -+ printk_once(KERN_DEBUG "dwc_otg: DEVICE:%03d : %s:%d:trimming xfer length\n", -+ hc->dev_addr, __func__, __LINE__); -+ bytes_transferred = urb->length - urb->actual_length; -+ } -+ -+ /* non DWORD-aligned buffer case handling. */ -+ if (hc->align_buff && bytes_transferred && hc->ep_is_in) { -+ dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf, -+ bytes_transferred); -+ } -+ -+ urb->actual_length += bytes_transferred; -+ -+#ifdef DEBUG -+ { -+ hctsiz_data_t hctsiz; -+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); -+ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", -+ __func__, (hc->ep_is_in ? "IN" : "OUT"), -+ hc->hc_num); -+ DWC_DEBUGPL(DBG_HCDV, " hc->start_pkt_count %d\n", -+ hc->start_pkt_count); -+ DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt); -+ DWC_DEBUGPL(DBG_HCDV, " hc->max_packet %d\n", hc->max_packet); -+ DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n", -+ bytes_transferred); -+ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", -+ urb->actual_length); -+ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", -+ urb->length); -+ } -+#endif -+} -+ -+/** -+ * Handles a host channel NAK interrupt. This handler may be called in either -+ * DMA mode or Slave mode. -+ */ -+static int32_t handle_hc_nak_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "NAK Received--\n", hc->hc_num); -+ -+ /* -+ * When we get bulk NAKs then remember this so we holdoff on this qh until -+ * the beginning of the next frame -+ */ -+ switch(dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { -+ case UE_BULK: -+ case UE_CONTROL: -+ if (nak_holdoff && qtd->qh->do_split) -+ hc->qh->nak_frame = dwc_otg_hcd_get_frame_number(hcd); -+ } -+ -+ /* -+ * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and -+ * interrupt. Re-start the SSPLIT transfer. -+ */ -+ if (hc->do_split) { -+ if (hc->complete_split) { -+ qtd->error_count = 0; -+ } -+ qtd->complete_split = 0; -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); -+ goto handle_nak_done; -+ } -+ -+ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { -+ case UE_CONTROL: -+ case UE_BULK: -+ if (hcd->core_if->dma_enable && hc->ep_is_in) { -+ /* -+ * NAK interrupts are enabled on bulk/control IN -+ * transfers in DMA mode for the sole purpose of -+ * resetting the error count after a transaction error -+ * occurs. The core will continue transferring data. -+ * Disable other interrupts unmasked for the same -+ * reason. -+ */ -+ disable_hc_int(hc_regs, datatglerr); -+ disable_hc_int(hc_regs, ack); -+ qtd->error_count = 0; -+ goto handle_nak_done; -+ } -+ -+ /* -+ * NAK interrupts normally occur during OUT transfers in DMA -+ * or Slave mode. For IN transfers, more requests will be -+ * queued as request queue space is available. -+ */ -+ qtd->error_count = 0; -+ -+ if (!hc->qh->ping_state) { -+ update_urb_state_xfer_intr(hc, hc_regs, -+ qtd->urb, qtd, -+ DWC_OTG_HC_XFER_NAK); -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ -+ if (hc->speed == DWC_OTG_EP_SPEED_HIGH) -+ hc->qh->ping_state = 1; -+ } -+ -+ /* -+ * Halt the channel so the transfer can be re-started from -+ * the appropriate point or the PING protocol will -+ * start/continue. -+ */ -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); -+ break; -+ case UE_INTERRUPT: -+ qtd->error_count = 0; -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); -+ break; -+ case UE_ISOCHRONOUS: -+ /* Should never get called for isochronous transfers. */ -+ DWC_ASSERT(1, "NACK interrupt for ISOC transfer\n"); -+ break; -+ } -+ -+handle_nak_done: -+ disable_hc_int(hc_regs, nak); -+ -+ return 1; -+} -+ -+/** -+ * Handles a host channel ACK interrupt. This interrupt is enabled when -+ * performing the PING protocol in Slave mode, when errors occur during -+ * either Slave mode or DMA mode, and during Start Split transactions. -+ */ -+static int32_t handle_hc_ack_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "ACK Received--\n", hc->hc_num); -+ -+ if (hc->do_split) { -+ /* -+ * Handle ACK on SSPLIT. -+ * ACK should not occur in CSPLIT. -+ */ -+ if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) { -+ qtd->ssplit_out_xfer_count = hc->xfer_len; -+ } -+ if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) { -+ /* Don't need complete for isochronous out transfers. */ -+ qtd->complete_split = 1; -+ } -+ -+ /* ISOC OUT */ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) { -+ switch (hc->xact_pos) { -+ case DWC_HCSPLIT_XACTPOS_ALL: -+ break; -+ case DWC_HCSPLIT_XACTPOS_END: -+ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; -+ qtd->isoc_split_offset = 0; -+ break; -+ case DWC_HCSPLIT_XACTPOS_BEGIN: -+ case DWC_HCSPLIT_XACTPOS_MID: -+ /* -+ * For BEGIN or MID, calculate the length for -+ * the next microframe to determine the correct -+ * SSPLIT token, either MID or END. -+ */ -+ { -+ struct dwc_otg_hcd_iso_packet_desc -+ *frame_desc; -+ -+ frame_desc = -+ &qtd->urb-> -+ iso_descs[qtd->isoc_frame_index]; -+ qtd->isoc_split_offset += 188; -+ -+ if ((frame_desc->length - -+ qtd->isoc_split_offset) <= 188) { -+ qtd->isoc_split_pos = -+ DWC_HCSPLIT_XACTPOS_END; -+ } else { -+ qtd->isoc_split_pos = -+ DWC_HCSPLIT_XACTPOS_MID; -+ } -+ -+ } -+ break; -+ } -+ } else { -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK); -+ } -+ } else { -+ /* -+ * An unmasked ACK on a non-split DMA transaction is -+ * for the sole purpose of resetting error counts. Disable other -+ * interrupts unmasked for the same reason. -+ */ -+ if(hcd->core_if->dma_enable) { -+ disable_hc_int(hc_regs, datatglerr); -+ disable_hc_int(hc_regs, nak); -+ } -+ qtd->error_count = 0; -+ -+ if (hc->qh->ping_state) { -+ hc->qh->ping_state = 0; -+ /* -+ * Halt the channel so the transfer can be re-started -+ * from the appropriate point. This only happens in -+ * Slave mode. In DMA mode, the ping_state is cleared -+ * when the transfer is started because the core -+ * automatically executes the PING, then the transfer. -+ */ -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK); -+ } -+ } -+ -+ /* -+ * If the ACK occurred when _not_ in the PING state, let the channel -+ * continue transferring data after clearing the error count. -+ */ -+ -+ disable_hc_int(hc_regs, ack); -+ -+ return 1; -+} -+ -+/** -+ * Handles a host channel NYET interrupt. This interrupt should only occur on -+ * Bulk and Control OUT endpoints and for complete split transactions. If a -+ * NYET occurs at the same time as a Transfer Complete interrupt, it is -+ * handled in the xfercomp interrupt handler, not here. This handler may be -+ * called in either DMA mode or Slave mode. -+ */ -+static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "NYET Received--\n", hc->hc_num); -+ -+ /* -+ * NYET on CSPLIT -+ * re-do the CSPLIT immediately on non-periodic -+ */ -+ if (hc->do_split && hc->complete_split) { -+ if (hc->ep_is_in && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) -+ && hcd->core_if->dma_enable) { -+ qtd->complete_split = 0; -+ qtd->isoc_split_offset = 0; -+ if (++qtd->isoc_frame_index == qtd->urb->packet_count) { -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } -+ else -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); -+ goto handle_nyet_done; -+ } -+ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || -+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { -+ int frnum = dwc_otg_hcd_get_frame_number(hcd); -+ -+ // With the FIQ running we only ever see the failed NYET -+ if (dwc_full_frame_num(frnum) != -+ dwc_full_frame_num(hc->qh->sched_frame) || -+ fiq_fsm_enable) { -+ /* -+ * No longer in the same full speed frame. -+ * Treat this as a transaction error. -+ */ -+#if 0 -+ /** @todo Fix system performance so this can -+ * be treated as an error. Right now complete -+ * splits cannot be scheduled precisely enough -+ * due to other system activity, so this error -+ * occurs regularly in Slave mode. -+ */ -+ qtd->error_count++; -+#endif -+ qtd->complete_split = 0; -+ halt_channel(hcd, hc, qtd, -+ DWC_OTG_HC_XFER_XACT_ERR); -+ /** @todo add support for isoc release */ -+ goto handle_nyet_done; -+ } -+ } -+ -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET); -+ goto handle_nyet_done; -+ } -+ -+ hc->qh->ping_state = 1; -+ qtd->error_count = 0; -+ -+ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd, -+ DWC_OTG_HC_XFER_NYET); -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ -+ /* -+ * Halt the channel and re-start the transfer so the PING -+ * protocol will start. -+ */ -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET); -+ -+handle_nyet_done: -+ disable_hc_int(hc_regs, nyet); -+ return 1; -+} -+ -+/** -+ * Handles a host channel babble interrupt. This handler may be called in -+ * either DMA mode or Slave mode. -+ */ -+static int32_t handle_hc_babble_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "Babble Error--\n", hc->hc_num); -+ -+ if (hcd->core_if->dma_desc_enable) { -+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, -+ DWC_OTG_HC_XFER_BABBLE_ERR); -+ goto handle_babble_done; -+ } -+ -+ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { -+ hcd->fops->complete(hcd, qtd->urb->priv, -+ qtd->urb, -DWC_E_OVERFLOW); -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR); -+ } else { -+ dwc_otg_halt_status_e halt_status; -+ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd, -+ DWC_OTG_HC_XFER_BABBLE_ERR); -+ halt_channel(hcd, hc, qtd, halt_status); -+ } -+ -+handle_babble_done: -+ disable_hc_int(hc_regs, bblerr); -+ return 1; -+} -+ -+/** -+ * Handles a host channel AHB error interrupt. This handler is only called in -+ * DMA mode. -+ */ -+static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ hcchar_data_t hcchar; -+ hcsplt_data_t hcsplt; -+ hctsiz_data_t hctsiz; -+ uint32_t hcdma; -+ char *pipetype, *speed; -+ -+ dwc_otg_hcd_urb_t *urb = qtd->urb; -+ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "AHB Error--\n", hc->hc_num); -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); -+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); -+ hcdma = DWC_READ_REG32(&hc_regs->hcdma); -+ -+ DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num); -+ DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); -+ DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma); -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n"); -+ DWC_ERROR(" Device address: %d\n", -+ dwc_otg_hcd_get_dev_addr(&urb->pipe_info)); -+ DWC_ERROR(" Endpoint: %d, %s\n", -+ dwc_otg_hcd_get_ep_num(&urb->pipe_info), -+ (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT")); -+ -+ switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) { -+ case UE_CONTROL: -+ pipetype = "CONTROL"; -+ break; -+ case UE_BULK: -+ pipetype = "BULK"; -+ break; -+ case UE_INTERRUPT: -+ pipetype = "INTERRUPT"; -+ break; -+ case UE_ISOCHRONOUS: -+ pipetype = "ISOCHRONOUS"; -+ break; -+ default: -+ pipetype = "UNKNOWN"; -+ break; -+ } -+ -+ DWC_ERROR(" Endpoint type: %s\n", pipetype); -+ -+ switch (hc->speed) { -+ case DWC_OTG_EP_SPEED_HIGH: -+ speed = "HIGH"; -+ break; -+ case DWC_OTG_EP_SPEED_FULL: -+ speed = "FULL"; -+ break; -+ case DWC_OTG_EP_SPEED_LOW: -+ speed = "LOW"; -+ break; -+ default: -+ speed = "UNKNOWN"; -+ break; -+ }; -+ -+ DWC_ERROR(" Speed: %s\n", speed); -+ -+ DWC_ERROR(" Max packet size: %d\n", -+ dwc_otg_hcd_get_mps(&urb->pipe_info)); -+ DWC_ERROR(" Data buffer length: %d\n", urb->length); -+ DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n", -+ urb->buf, (void *)urb->dma); -+ DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n", -+ urb->setup_packet, (void *)urb->setup_dma); -+ DWC_ERROR(" Interval: %d\n", urb->interval); -+ -+ /* Core haltes the channel for Descriptor DMA mode */ -+ if (hcd->core_if->dma_desc_enable) { -+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, -+ DWC_OTG_HC_XFER_AHB_ERR); -+ goto handle_ahberr_done; -+ } -+ -+ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_IO); -+ -+ /* -+ * Force a channel halt. Don't call halt_channel because that won't -+ * write to the HCCHARn register in DMA mode to force the halt. -+ */ -+ dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR); -+handle_ahberr_done: -+ disable_hc_int(hc_regs, ahberr); -+ return 1; -+} -+ -+/** -+ * Handles a host channel transaction error interrupt. This handler may be -+ * called in either DMA mode or Slave mode. -+ */ -+static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "Transaction Error--\n", hc->hc_num); -+ -+ if (hcd->core_if->dma_desc_enable) { -+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, -+ DWC_OTG_HC_XFER_XACT_ERR); -+ goto handle_xacterr_done; -+ } -+ -+ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { -+ case UE_CONTROL: -+ case UE_BULK: -+ qtd->error_count++; -+ if (!hc->qh->ping_state) { -+ -+ update_urb_state_xfer_intr(hc, hc_regs, -+ qtd->urb, qtd, -+ DWC_OTG_HC_XFER_XACT_ERR); -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ if (!hc->ep_is_in && hc->speed == DWC_OTG_EP_SPEED_HIGH) { -+ hc->qh->ping_state = 1; -+ } -+ } -+ -+ /* -+ * Halt the channel so the transfer can be re-started from -+ * the appropriate point or the PING protocol will start. -+ */ -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); -+ break; -+ case UE_INTERRUPT: -+ qtd->error_count++; -+ if (hc->do_split && hc->complete_split) { -+ qtd->complete_split = 0; -+ } -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); -+ break; -+ case UE_ISOCHRONOUS: -+ { -+ dwc_otg_halt_status_e halt_status; -+ halt_status = -+ update_isoc_urb_state(hcd, hc, hc_regs, qtd, -+ DWC_OTG_HC_XFER_XACT_ERR); -+ -+ halt_channel(hcd, hc, qtd, halt_status); -+ } -+ break; -+ } -+handle_xacterr_done: -+ disable_hc_int(hc_regs, xacterr); -+ -+ return 1; -+} -+ -+/** -+ * Handles a host channel frame overrun interrupt. This handler may be called -+ * in either DMA mode or Slave mode. -+ */ -+static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "Frame Overrun--\n", hc->hc_num); -+ -+ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { -+ case UE_CONTROL: -+ case UE_BULK: -+ break; -+ case UE_INTERRUPT: -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN); -+ break; -+ case UE_ISOCHRONOUS: -+ { -+ dwc_otg_halt_status_e halt_status; -+ halt_status = -+ update_isoc_urb_state(hcd, hc, hc_regs, qtd, -+ DWC_OTG_HC_XFER_FRAME_OVERRUN); -+ -+ halt_channel(hcd, hc, qtd, halt_status); -+ } -+ break; -+ } -+ -+ disable_hc_int(hc_regs, frmovrun); -+ -+ return 1; -+} -+ -+/** -+ * Handles a host channel data toggle error interrupt. This handler may be -+ * called in either DMA mode or Slave mode. -+ */ -+static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "Data Toggle Error on %s transfer--\n", -+ hc->hc_num, (hc->ep_is_in ? "IN" : "OUT")); -+ -+ /* Data toggles on split transactions cause the hc to halt. -+ * restart transfer */ -+ if(hc->qh->do_split) -+ { -+ qtd->error_count++; -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ update_urb_state_xfer_intr(hc, hc_regs, -+ qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR); -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); -+ } else if (hc->ep_is_in) { -+ /* An unmasked data toggle error on a non-split DMA transaction is -+ * for the sole purpose of resetting error counts. Disable other -+ * interrupts unmasked for the same reason. -+ */ -+ if(hcd->core_if->dma_enable) { -+ disable_hc_int(hc_regs, ack); -+ disable_hc_int(hc_regs, nak); -+ } -+ qtd->error_count = 0; -+ } -+ -+ disable_hc_int(hc_regs, datatglerr); -+ -+ return 1; -+} -+ -+#ifdef DEBUG -+/** -+ * This function is for debug only. It checks that a valid halt status is set -+ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is -+ * taken and a warning is issued. -+ * @return 1 if halt status is ok, 0 otherwise. -+ */ -+static inline int halt_status_ok(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ hcchar_data_t hcchar; -+ hctsiz_data_t hctsiz; -+ hcint_data_t hcint; -+ hcintmsk_data_t hcintmsk; -+ hcsplt_data_t hcsplt; -+ -+ if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) { -+ /* -+ * This code is here only as a check. This condition should -+ * never happen. Ignore the halt if it does occur. -+ */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk); -+ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); -+ DWC_WARN -+ ("%s: hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, " -+ "channel %d, hcchar 0x%08x, hctsiz 0x%08x, " -+ "hcint 0x%08x, hcintmsk 0x%08x, " -+ "hcsplt 0x%08x, qtd->complete_split %d\n", __func__, -+ hc->hc_num, hcchar.d32, hctsiz.d32, hcint.d32, -+ hcintmsk.d32, hcsplt.d32, qtd->complete_split); -+ -+ DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n", -+ __func__, hc->hc_num); -+ DWC_WARN("\n"); -+ clear_hc_int(hc_regs, chhltd); -+ return 0; -+ } -+ -+ /* -+ * This code is here only as a check. hcchar.chdis should -+ * never be set when the halt interrupt occurs. Halt the -+ * channel again if it does occur. -+ */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ if (hcchar.b.chdis) { -+ DWC_WARN("%s: hcchar.chdis set unexpectedly, " -+ "hcchar 0x%08x, trying to halt again\n", -+ __func__, hcchar.d32); -+ clear_hc_int(hc_regs, chhltd); -+ hc->halt_pending = 0; -+ halt_channel(hcd, hc, qtd, hc->halt_status); -+ return 0; -+ } -+ -+ return 1; -+} -+#endif -+ -+/** -+ * Handles a host Channel Halted interrupt in DMA mode. This handler -+ * determines the reason the channel halted and proceeds accordingly. -+ */ -+static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ int out_nak_enh = 0; -+ hcint_data_t hcint; -+ hcintmsk_data_t hcintmsk; -+ /* For core with OUT NAK enhancement, the flow for high- -+ * speed CONTROL/BULK OUT is handled a little differently. -+ */ -+ if (hcd->core_if->snpsid >= OTG_CORE_REV_2_71a) { -+ if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in && -+ (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || -+ hc->ep_type == DWC_OTG_EP_TYPE_BULK)) { -+ out_nak_enh = 1; -+ } -+ } -+ -+ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || -+ (hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR -+ && !hcd->core_if->dma_desc_enable)) { -+ /* -+ * Just release the channel. A dequeue can happen on a -+ * transfer timeout. In the case of an AHB Error, the channel -+ * was forced to halt because there's no way to gracefully -+ * recover. -+ */ -+ if (hcd->core_if->dma_desc_enable) -+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, -+ hc->halt_status); -+ else -+ release_channel(hcd, hc, qtd, hc->halt_status); -+ return; -+ } -+ -+ /* Read the HCINTn register to determine the cause for the halt. */ -+ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk); -+ -+ if (hcint.b.xfercomp) { -+ /** @todo This is here because of a possible hardware bug. Spec -+ * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT -+ * interrupt w/ACK bit set should occur, but I only see the -+ * XFERCOMP bit, even with it masked out. This is a workaround -+ * for that behavior. Should fix this when hardware is fixed. -+ */ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) { -+ handle_hc_ack_intr(hcd, hc, hc_regs, qtd); -+ } -+ handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.stall) { -+ handle_hc_stall_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.xacterr && !hcd->core_if->dma_desc_enable) { -+ if (out_nak_enh) { -+ if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) { -+ DWC_DEBUGPL(DBG_HCD, "XactErr with NYET/NAK/ACK\n"); -+ qtd->error_count = 0; -+ } else { -+ DWC_DEBUGPL(DBG_HCD, "XactErr without NYET/NAK/ACK\n"); -+ } -+ } -+ -+ /* -+ * Must handle xacterr before nak or ack. Could get a xacterr -+ * at the same time as either of these on a BULK/CONTROL OUT -+ * that started with a PING. The xacterr takes precedence. -+ */ -+ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.xcs_xact && hcd->core_if->dma_desc_enable) { -+ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.ahberr && hcd->core_if->dma_desc_enable) { -+ handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.bblerr) { -+ handle_hc_babble_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.frmovrun) { -+ handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.datatglerr) { -+ handle_hc_datatglerr_intr(hcd, hc, hc_regs, qtd); -+ } else if (!out_nak_enh) { -+ if (hcint.b.nyet) { -+ /* -+ * Must handle nyet before nak or ack. Could get a nyet at the -+ * same time as either of those on a BULK/CONTROL OUT that -+ * started with a PING. The nyet takes precedence. -+ */ -+ handle_hc_nyet_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.nak && !hcintmsk.b.nak) { -+ /* -+ * If nak is not masked, it's because a non-split IN transfer -+ * is in an error state. In that case, the nak is handled by -+ * the nak interrupt handler, not here. Handle nak here for -+ * BULK/CONTROL OUT transfers, which halt on a NAK to allow -+ * rewinding the buffer pointer. -+ */ -+ handle_hc_nak_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.ack && !hcintmsk.b.ack) { -+ /* -+ * If ack is not masked, it's because a non-split IN transfer -+ * is in an error state. In that case, the ack is handled by -+ * the ack interrupt handler, not here. Handle ack here for -+ * split transfers. Start splits halt on ACK. -+ */ -+ handle_hc_ack_intr(hcd, hc, hc_regs, qtd); -+ } else { -+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || -+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { -+ /* -+ * A periodic transfer halted with no other channel -+ * interrupts set. Assume it was halted by the core -+ * because it could not be completed in its scheduled -+ * (micro)frame. -+ */ -+#ifdef DEBUG -+ DWC_PRINTF -+ ("%s: Halt channel %d (assume incomplete periodic transfer)\n", -+ __func__, hc->hc_num); -+#endif -+ halt_channel(hcd, hc, qtd, -+ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE); -+ } else { -+ DWC_ERROR -+ ("%s: Channel %d, DMA Mode -- ChHltd set, but reason " -+ "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n", -+ __func__, hc->hc_num, hcint.d32, -+ DWC_READ_REG32(&hcd-> -+ core_if->core_global_regs-> -+ gintsts)); -+ /* Failthrough: use 3-strikes rule */ -+ qtd->error_count++; -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ update_urb_state_xfer_intr(hc, hc_regs, -+ qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR); -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); -+ } -+ -+ } -+ } else { -+ DWC_PRINTF("NYET/NAK/ACK/other in non-error case, 0x%08x\n", -+ hcint.d32); -+ /* Failthrough: use 3-strikes rule */ -+ qtd->error_count++; -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ update_urb_state_xfer_intr(hc, hc_regs, -+ qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR); -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); -+ } -+} -+ -+/** -+ * Handles a host channel Channel Halted interrupt. -+ * -+ * In slave mode, this handler is called only when the driver specifically -+ * requests a halt. This occurs during handling other host channel interrupts -+ * (e.g. nak, xacterr, stall, nyet, etc.). -+ * -+ * In DMA mode, this is the interrupt that occurs when the core has finished -+ * processing a transfer on a channel. Other host channel interrupts (except -+ * ahberr) are disabled in DMA mode. -+ */ -+static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "Channel Halted--\n", hc->hc_num); -+ -+ if (hcd->core_if->dma_enable) { -+ handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd); -+ } else { -+#ifdef DEBUG -+ if (!halt_status_ok(hcd, hc, hc_regs, qtd)) { -+ return 1; -+ } -+#endif -+ release_channel(hcd, hc, qtd, hc->halt_status); -+ } -+ -+ return 1; -+} -+ -+ -+/** -+ * dwc_otg_fiq_unmangle_isoc() - Update the iso_frame_desc structure on -+ * FIQ transfer completion -+ * @hcd: Pointer to dwc_otg_hcd struct -+ * @num: Host channel number -+ * -+ * 1. Un-mangle the status as recorded in each iso_frame_desc status -+ * 2. Copy it from the dwc_otg_urb into the real URB -+ */ -+void dwc_otg_fiq_unmangle_isoc(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, dwc_otg_qtd_t *qtd, uint32_t num) -+{ -+ struct dwc_otg_hcd_urb *dwc_urb = qtd->urb; -+ int nr_frames = dwc_urb->packet_count; -+ int i; -+ hcint_data_t frame_hcint; -+ -+ for (i = 0; i < nr_frames; i++) { -+ frame_hcint.d32 = dwc_urb->iso_descs[i].status; -+ if (frame_hcint.b.xfercomp) { -+ dwc_urb->iso_descs[i].status = 0; -+ dwc_urb->actual_length += dwc_urb->iso_descs[i].actual_length; -+ } else if (frame_hcint.b.frmovrun) { -+ if (qh->ep_is_in) -+ dwc_urb->iso_descs[i].status = -DWC_E_NO_STREAM_RES; -+ else -+ dwc_urb->iso_descs[i].status = -DWC_E_COMMUNICATION; -+ dwc_urb->error_count++; -+ dwc_urb->iso_descs[i].actual_length = 0; -+ } else if (frame_hcint.b.xacterr) { -+ dwc_urb->iso_descs[i].status = -DWC_E_PROTOCOL; -+ dwc_urb->error_count++; -+ dwc_urb->iso_descs[i].actual_length = 0; -+ } else if (frame_hcint.b.bblerr) { -+ dwc_urb->iso_descs[i].status = -DWC_E_OVERFLOW; -+ dwc_urb->error_count++; -+ dwc_urb->iso_descs[i].actual_length = 0; -+ } else { -+ /* Something went wrong */ -+ dwc_urb->iso_descs[i].status = -1; -+ dwc_urb->iso_descs[i].actual_length = 0; -+ dwc_urb->error_count++; -+ } -+ } -+ qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, qh->interval * (nr_frames - 1)); -+ -+ //printk_ratelimited(KERN_INFO "%s: HS isochronous of %d/%d frames with %d errors complete\n", -+ // __FUNCTION__, i, dwc_urb->packet_count, dwc_urb->error_count); -+} -+ -+/** -+ * dwc_otg_fiq_unsetup_per_dma() - Remove data from bounce buffers for split transactions -+ * @hcd: Pointer to dwc_otg_hcd struct -+ * @num: Host channel number -+ * -+ * Copies data from the FIQ bounce buffers into the URB's transfer buffer. Does not modify URB state. -+ * Returns total length of data or -1 if the buffers were not used. -+ * -+ */ -+int dwc_otg_fiq_unsetup_per_dma(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, dwc_otg_qtd_t *qtd, uint32_t num) -+{ -+ dwc_hc_t *hc = qh->channel; -+ struct fiq_dma_blob *blob = hcd->fiq_dmab; -+ struct fiq_channel_state *st = &hcd->fiq_state->channel[num]; -+ uint8_t *ptr = NULL; -+ int index = 0, len = 0; -+ int i = 0; -+ if (hc->ep_is_in) { -+ /* Copy data out of the DMA bounce buffers to the URB's buffer. -+ * The align_buf is ignored as this is ignored on FSM enqueue. */ -+ ptr = qtd->urb->buf; -+ if (qh->ep_type == UE_ISOCHRONOUS) { -+ /* Isoc IN transactions - grab the offset of the iso_frame_desc into the URB transfer buffer */ -+ index = qtd->isoc_frame_index; -+ ptr += qtd->urb->iso_descs[index].offset; -+ } else { -+ /* Need to increment by actual_length for interrupt IN */ -+ ptr += qtd->urb->actual_length; -+ } -+ -+ for (i = 0; i < st->dma_info.index; i++) { -+ len += st->dma_info.slot_len[i]; -+ dwc_memcpy(ptr, &blob->channel[num].index[i].buf[0], st->dma_info.slot_len[i]); -+ ptr += st->dma_info.slot_len[i]; -+ } -+ return len; -+ } else { -+ /* OUT endpoints - nothing to do. */ -+ return -1; -+ } -+ -+} -+/** -+ * dwc_otg_hcd_handle_hc_fsm() - handle an unmasked channel interrupt -+ * from a channel handled in the FIQ -+ * @hcd: Pointer to dwc_otg_hcd struct -+ * @num: Host channel number -+ * -+ * If a host channel interrupt was received by the IRQ and this was a channel -+ * used by the FIQ, the execution flow for transfer completion is substantially -+ * different from the normal (messy) path. This function and its friends handles -+ * channel cleanup and transaction completion from a FIQ transaction. -+ */ -+void dwc_otg_hcd_handle_hc_fsm(dwc_otg_hcd_t *hcd, uint32_t num) -+{ -+ struct fiq_channel_state *st = &hcd->fiq_state->channel[num]; -+ dwc_hc_t *hc = hcd->hc_ptr_array[num]; -+ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list); -+ dwc_otg_qh_t *qh = hc->qh; -+ dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[num]; -+ hcint_data_t hcint = hcd->fiq_state->channel[num].hcint_copy; -+ int hostchannels = 0; -+ fiq_print(FIQDBG_INT, hcd->fiq_state, "OUT %01d %01d ", num , st->fsm); -+ -+ hostchannels = hcd->available_host_channels; -+ switch (st->fsm) { -+ case FIQ_TEST: -+ break; -+ -+ case FIQ_DEQUEUE_ISSUED: -+ /* hc_halt was called. QTD no longer exists. */ -+ /* TODO: for a nonperiodic split transaction, need to issue a -+ * CLEAR_TT_BUFFER hub command if we were in the start-split phase. -+ */ -+ release_channel(hcd, hc, NULL, hc->halt_status); -+ break; -+ -+ case FIQ_NP_SPLIT_DONE: -+ /* Nonperiodic transaction complete. */ -+ if (!hc->ep_is_in) { -+ qtd->ssplit_out_xfer_count = hc->xfer_len; -+ } -+ if (hcint.b.xfercomp) { -+ handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.nak) { -+ handle_hc_nak_intr(hcd, hc, hc_regs, qtd); -+ } -+ break; -+ -+ case FIQ_NP_SPLIT_HS_ABORTED: -+ /* A HS abort is a 3-strikes on the HS bus at any point in the transaction. -+ * Normally a CLEAR_TT_BUFFER hub command would be required: we can't do that -+ * because there's no guarantee which order a non-periodic split happened in. -+ * We could end up clearing a perfectly good transaction out of the buffer. -+ */ -+ if (hcint.b.xacterr) { -+ qtd->error_count += st->nr_errors; -+ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.ahberr) { -+ handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd); -+ } else { -+ local_fiq_disable(); -+ BUG(); -+ } -+ break; -+ -+ case FIQ_NP_SPLIT_LS_ABORTED: -+ /* A few cases can cause this - either an unknown state on a SSPLIT or -+ * STALL/data toggle error response on a CSPLIT */ -+ if (hcint.b.stall) { -+ handle_hc_stall_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.datatglerr) { -+ handle_hc_datatglerr_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.bblerr) { -+ handle_hc_babble_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.ahberr) { -+ handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd); -+ } else { -+ local_fiq_disable(); -+ BUG(); -+ } -+ break; -+ -+ case FIQ_PER_SPLIT_DONE: -+ /* Isoc IN or Interrupt IN/OUT */ -+ -+ /* Flow control here is different from the normal execution by the driver. -+ * We need to completely ignore most of the driver's method of handling -+ * split transactions and do it ourselves. -+ */ -+ if (hc->ep_type == UE_INTERRUPT) { -+ if (hcint.b.nak) { -+ handle_hc_nak_intr(hcd, hc, hc_regs, qtd); -+ } else if (hc->ep_is_in) { -+ int len; -+ len = dwc_otg_fiq_unsetup_per_dma(hcd, hc->qh, qtd, num); -+ //printk(KERN_NOTICE "FIQ Transaction: hc=%d len=%d urb_len = %d\n", num, len, qtd->urb->length); -+ qtd->urb->actual_length += len; -+ if (qtd->urb->actual_length >= qtd->urb->length) { -+ qtd->urb->status = 0; -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } else { -+ /* Interrupt transfer not complete yet - is it a short read? */ -+ if (len < hc->max_packet) { -+ /* Interrupt transaction complete */ -+ qtd->urb->status = 0; -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } else { -+ /* Further transactions required */ -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); -+ } -+ } -+ } else { -+ /* Interrupt OUT complete. */ -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ qtd->urb->actual_length += hc->xfer_len; -+ if (qtd->urb->actual_length >= qtd->urb->length) { -+ qtd->urb->status = 0; -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } else { -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); -+ } -+ } -+ } else { -+ /* ISOC IN complete. */ -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; -+ int len = 0; -+ /* Record errors, update qtd. */ -+ if (st->nr_errors) { -+ frame_desc->actual_length = 0; -+ frame_desc->status = -DWC_E_PROTOCOL; -+ } else { -+ frame_desc->status = 0; -+ /* Unswizzle dma */ -+ len = dwc_otg_fiq_unsetup_per_dma(hcd, qh, qtd, num); -+ frame_desc->actual_length = len; -+ } -+ qtd->isoc_frame_index++; -+ if (qtd->isoc_frame_index == qtd->urb->packet_count) { -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } else { -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); -+ } -+ } -+ break; -+ -+ case FIQ_PER_ISO_OUT_DONE: { -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; -+ /* Record errors, update qtd. */ -+ if (st->nr_errors) { -+ frame_desc->actual_length = 0; -+ frame_desc->status = -DWC_E_PROTOCOL; -+ } else { -+ frame_desc->status = 0; -+ frame_desc->actual_length = frame_desc->length; -+ } -+ qtd->isoc_frame_index++; -+ qtd->isoc_split_offset = 0; -+ if (qtd->isoc_frame_index == qtd->urb->packet_count) { -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } else { -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); -+ } -+ } -+ break; -+ -+ case FIQ_PER_SPLIT_NYET_ABORTED: -+ /* Doh. lost the data. */ -+ printk_ratelimited(KERN_INFO "Transfer to device %d endpoint 0x%x frame %d failed " -+ "- FIQ reported NYET. Data may have been lost.\n", -+ hc->dev_addr, hc->ep_num, dwc_otg_hcd_get_frame_number(hcd) >> 3); -+ if (hc->ep_type == UE_ISOCHRONOUS) { -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; -+ /* Record errors, update qtd. */ -+ frame_desc->actual_length = 0; -+ frame_desc->status = -DWC_E_PROTOCOL; -+ qtd->isoc_frame_index++; -+ qtd->isoc_split_offset = 0; -+ if (qtd->isoc_frame_index == qtd->urb->packet_count) { -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } else { -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); -+ } -+ } else { -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); -+ } -+ break; -+ -+ case FIQ_HS_ISOC_DONE: -+ /* The FIQ has performed a whole pile of isochronous transactions. -+ * The status is recorded as the interrupt state should the transaction -+ * fail. -+ */ -+ dwc_otg_fiq_unmangle_isoc(hcd, qh, qtd, num); -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ break; -+ -+ case FIQ_PER_SPLIT_LS_ABORTED: -+ if (hcint.b.xacterr) { -+ /* Hub has responded with an ERR packet. Device -+ * has been unplugged or the port has been disabled. -+ * TODO: need to issue a reset to the hub port. */ -+ qtd->error_count += 3; -+ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.stall) { -+ handle_hc_stall_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.bblerr) { -+ handle_hc_babble_intr(hcd, hc, hc_regs, qtd); -+ } else { -+ printk_ratelimited(KERN_INFO "Transfer to device %d endpoint 0x%x failed " -+ "- FIQ reported FSM=%d. Data may have been lost.\n", -+ st->fsm, hc->dev_addr, hc->ep_num); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); -+ } -+ break; -+ -+ case FIQ_PER_SPLIT_HS_ABORTED: -+ /* Either the SSPLIT phase suffered transaction errors or something -+ * unexpected happened. -+ */ -+ qtd->error_count += 3; -+ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); -+ break; -+ -+ case FIQ_PER_SPLIT_TIMEOUT: -+ /* Couldn't complete in the nominated frame */ -+ printk(KERN_INFO "Transfer to device %d endpoint 0x%x frame %d failed " -+ "- FIQ timed out. Data may have been lost.\n", -+ hc->dev_addr, hc->ep_num, dwc_otg_hcd_get_frame_number(hcd) >> 3); -+ if (hc->ep_type == UE_ISOCHRONOUS) { -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; -+ /* Record errors, update qtd. */ -+ frame_desc->actual_length = 0; -+ if (hc->ep_is_in) { -+ frame_desc->status = -DWC_E_NO_STREAM_RES; -+ } else { -+ frame_desc->status = -DWC_E_COMMUNICATION; -+ } -+ qtd->isoc_frame_index++; -+ if (qtd->isoc_frame_index == qtd->urb->packet_count) { -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } else { -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); -+ } -+ } else { -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); -+ } -+ break; -+ -+ default: -+ DWC_WARN("Unexpected state received on hc=%d fsm=%d on transfer to device %d ep 0x%x", -+ hc->hc_num, st->fsm, hc->dev_addr, hc->ep_num); -+ qtd->error_count++; -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); -+ } -+ return; -+} -+ -+/** Handles interrupt for a specific Host Channel */ -+int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, uint32_t num) -+{ -+ int retval = 0; -+ hcint_data_t hcint; -+ hcintmsk_data_t hcintmsk; -+ dwc_hc_t *hc; -+ dwc_otg_hc_regs_t *hc_regs; -+ dwc_otg_qtd_t *qtd; -+ -+ DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num); -+ -+ hc = dwc_otg_hcd->hc_ptr_array[num]; -+ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num]; -+ if(hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { -+ /* We are responding to a channel disable. Driver -+ * state is cleared - our qtd has gone away. -+ */ -+ release_channel(dwc_otg_hcd, hc, NULL, hc->halt_status); -+ return 1; -+ } -+ qtd = DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list); -+ -+ /* -+ * FSM mode: Check to see if this is a HC interrupt from a channel handled by the FIQ. -+ * Execution path is fundamentally different for the channels after a FIQ has completed -+ * a split transaction. -+ */ -+ if (fiq_fsm_enable) { -+ switch (dwc_otg_hcd->fiq_state->channel[num].fsm) { -+ case FIQ_PASSTHROUGH: -+ break; -+ case FIQ_PASSTHROUGH_ERRORSTATE: -+ /* Hook into the error count */ -+ fiq_print(FIQDBG_ERR, dwc_otg_hcd->fiq_state, "HCDERR%02d", num); -+ if (!dwc_otg_hcd->fiq_state->channel[num].nr_errors) { -+ qtd->error_count = 0; -+ fiq_print(FIQDBG_ERR, dwc_otg_hcd->fiq_state, "RESET "); -+ } -+ break; -+ default: -+ dwc_otg_hcd_handle_hc_fsm(dwc_otg_hcd, num); -+ return 1; -+ } -+ } -+ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk); -+ hcint.d32 = hcint.d32 & hcintmsk.d32; -+ if (!dwc_otg_hcd->core_if->dma_enable) { -+ if (hcint.b.chhltd && hcint.d32 != 0x2) { -+ hcint.b.chhltd = 0; -+ } -+ } -+ -+ if (hcint.b.xfercomp) { -+ retval |= -+ handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ /* -+ * If NYET occurred at same time as Xfer Complete, the NYET is -+ * handled by the Xfer Complete interrupt handler. Don't want -+ * to call the NYET interrupt handler in this case. -+ */ -+ hcint.b.nyet = 0; -+ } -+ if (hcint.b.chhltd) { -+ retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.ahberr) { -+ retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.stall) { -+ retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.nak) { -+ retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.ack) { -+ if(!hcint.b.chhltd) -+ retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.nyet) { -+ retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.xacterr) { -+ retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.bblerr) { -+ retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.frmovrun) { -+ retval |= -+ handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.datatglerr) { -+ retval |= -+ handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ -+ return retval; -+} -+#endif /* DWC_DEVICE_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c -@@ -0,0 +1,1005 @@ -+ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_linux.c $ -+ * $Revision: #20 $ -+ * $Date: 2011/10/26 $ -+ * $Change: 1872981 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_DEVICE_ONLY -+ -+/** -+ * @file -+ * -+ * This file contains the implementation of the HCD. In Linux, the HCD -+ * implements the hc_driver API. -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) -+#include <../drivers/usb/core/hcd.h> -+#else -+#include -+#endif -+#include -+ -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)) -+#define USB_URB_EP_LINKING 1 -+#else -+#define USB_URB_EP_LINKING 0 -+#endif -+ -+#include "dwc_otg_hcd_if.h" -+#include "dwc_otg_dbg.h" -+#include "dwc_otg_driver.h" -+#include "dwc_otg_hcd.h" -+ -+extern unsigned char _dwc_otg_fiq_stub, _dwc_otg_fiq_stub_end; -+ -+/** -+ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is -+ * qualified with its direction (possible 32 endpoints per device). -+ */ -+#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \ -+ ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4) -+ -+static const char dwc_otg_hcd_name[] = "dwc_otg_hcd"; -+ -+extern bool fiq_enable; -+ -+/** @name Linux HC Driver API Functions */ -+/** @{ */ -+/* manage i/o requests, device state */ -+static int dwc_otg_urb_enqueue(struct usb_hcd *hcd, -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+ struct usb_host_endpoint *ep, -+#endif -+ struct urb *urb, gfp_t mem_flags); -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb); -+#endif -+#else /* kernels at or post 2.6.30 */ -+static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, -+ struct urb *urb, int status); -+#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) */ -+ -+static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) -+static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep); -+#endif -+static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd); -+extern int hcd_start(struct usb_hcd *hcd); -+extern void hcd_stop(struct usb_hcd *hcd); -+static int get_frame_number(struct usb_hcd *hcd); -+extern int hub_status_data(struct usb_hcd *hcd, char *buf); -+extern int hub_control(struct usb_hcd *hcd, -+ u16 typeReq, -+ u16 wValue, u16 wIndex, char *buf, u16 wLength); -+ -+struct wrapper_priv_data { -+ dwc_otg_hcd_t *dwc_otg_hcd; -+}; -+ -+/** @} */ -+ -+static struct hc_driver dwc_otg_hc_driver = { -+ -+ .description = dwc_otg_hcd_name, -+ .product_desc = "DWC OTG Controller", -+ .hcd_priv_size = sizeof(struct wrapper_priv_data), -+ -+ .irq = dwc_otg_hcd_irq, -+ -+ .flags = HCD_MEMORY | HCD_USB2, -+ -+ //.reset = -+ .start = hcd_start, -+ //.suspend = -+ //.resume = -+ .stop = hcd_stop, -+ -+ .urb_enqueue = dwc_otg_urb_enqueue, -+ .urb_dequeue = dwc_otg_urb_dequeue, -+ .endpoint_disable = endpoint_disable, -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) -+ .endpoint_reset = endpoint_reset, -+#endif -+ .get_frame_number = get_frame_number, -+ -+ .hub_status_data = hub_status_data, -+ .hub_control = hub_control, -+ //.bus_suspend = -+ //.bus_resume = -+}; -+ -+/** Gets the dwc_otg_hcd from a struct usb_hcd */ -+static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd) -+{ -+ struct wrapper_priv_data *p; -+ p = (struct wrapper_priv_data *)(hcd->hcd_priv); -+ return p->dwc_otg_hcd; -+} -+ -+/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */ -+static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ return dwc_otg_hcd_get_priv_data(dwc_otg_hcd); -+} -+ -+/** Gets the usb_host_endpoint associated with an URB. */ -+inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb) -+{ -+ struct usb_device *dev = urb->dev; -+ int ep_num = usb_pipeendpoint(urb->pipe); -+ -+ if (usb_pipein(urb->pipe)) -+ return dev->ep_in[ep_num]; -+ else -+ return dev->ep_out[ep_num]; -+} -+ -+static int _disconnect(dwc_otg_hcd_t * hcd) -+{ -+ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); -+ -+ usb_hcd->self.is_b_host = 0; -+ return 0; -+} -+ -+static int _start(dwc_otg_hcd_t * hcd) -+{ -+ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); -+ -+ usb_hcd->self.is_b_host = dwc_otg_hcd_is_b_host(hcd); -+ hcd_start(usb_hcd); -+ -+ return 0; -+} -+ -+static int _hub_info(dwc_otg_hcd_t * hcd, void *urb_handle, uint32_t * hub_addr, -+ uint32_t * port_addr) -+{ -+ struct urb *urb = (struct urb *)urb_handle; -+ struct usb_bus *bus; -+#if 1 //GRAYG - temporary -+ if (NULL == urb_handle) -+ DWC_ERROR("**** %s - NULL URB handle\n", __func__);//GRAYG -+ if (NULL == urb->dev) -+ DWC_ERROR("**** %s - URB has no device\n", __func__);//GRAYG -+ if (NULL == port_addr) -+ DWC_ERROR("**** %s - NULL port_address\n", __func__);//GRAYG -+#endif -+ if (urb->dev->tt) { -+ if (NULL == urb->dev->tt->hub) { -+ DWC_ERROR("**** %s - (URB's transactor has no TT - giving no hub)\n", -+ __func__); //GRAYG -+ //*hub_addr = (u8)usb_pipedevice(urb->pipe); //GRAYG -+ *hub_addr = 0; //GRAYG -+ // we probably shouldn't have a transaction translator if -+ // there's no associated hub? -+ } else { -+ bus = hcd_to_bus(dwc_otg_hcd_to_hcd(hcd)); -+ if (urb->dev->tt->hub == bus->root_hub) -+ *hub_addr = 0; -+ else -+ *hub_addr = urb->dev->tt->hub->devnum; -+ } -+ *port_addr = urb->dev->tt->multi ? urb->dev->ttport : 1; -+ } else { -+ *hub_addr = 0; -+ *port_addr = urb->dev->ttport; -+ } -+ return 0; -+} -+ -+static int _speed(dwc_otg_hcd_t * hcd, void *urb_handle) -+{ -+ struct urb *urb = (struct urb *)urb_handle; -+ return urb->dev->speed; -+} -+ -+static int _get_b_hnp_enable(dwc_otg_hcd_t * hcd) -+{ -+ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); -+ return usb_hcd->self.b_hnp_enable; -+} -+ -+static void allocate_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw, -+ struct urb *urb) -+{ -+ hcd_to_bus(hcd)->bandwidth_allocated += bw / urb->interval; -+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -+ hcd_to_bus(hcd)->bandwidth_isoc_reqs++; -+ } else { -+ hcd_to_bus(hcd)->bandwidth_int_reqs++; -+ } -+} -+ -+static void free_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw, -+ struct urb *urb) -+{ -+ hcd_to_bus(hcd)->bandwidth_allocated -= bw / urb->interval; -+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -+ hcd_to_bus(hcd)->bandwidth_isoc_reqs--; -+ } else { -+ hcd_to_bus(hcd)->bandwidth_int_reqs--; -+ } -+} -+ -+/** -+ * Sets the final status of an URB and returns it to the device driver. Any -+ * required cleanup of the URB is performed. The HCD lock should be held on -+ * entry. -+ */ -+static int _complete(dwc_otg_hcd_t * hcd, void *urb_handle, -+ dwc_otg_hcd_urb_t * dwc_otg_urb, int32_t status) -+{ -+ struct urb *urb = (struct urb *)urb_handle; -+ urb_tq_entry_t *new_entry; -+ int rc = 0; -+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { -+ DWC_PRINTF("%s: urb %p, device %d, ep %d %s, status=%d\n", -+ __func__, urb, usb_pipedevice(urb->pipe), -+ usb_pipeendpoint(urb->pipe), -+ usb_pipein(urb->pipe) ? "IN" : "OUT", status); -+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -+ int i; -+ for (i = 0; i < urb->number_of_packets; i++) { -+ DWC_PRINTF(" ISO Desc %d status: %d\n", -+ i, urb->iso_frame_desc[i].status); -+ } -+ } -+ } -+ new_entry = DWC_ALLOC_ATOMIC(sizeof(urb_tq_entry_t)); -+ urb->actual_length = dwc_otg_hcd_urb_get_actual_length(dwc_otg_urb); -+ /* Convert status value. */ -+ switch (status) { -+ case -DWC_E_PROTOCOL: -+ status = -EPROTO; -+ break; -+ case -DWC_E_IN_PROGRESS: -+ status = -EINPROGRESS; -+ break; -+ case -DWC_E_PIPE: -+ status = -EPIPE; -+ break; -+ case -DWC_E_IO: -+ status = -EIO; -+ break; -+ case -DWC_E_TIMEOUT: -+ status = -ETIMEDOUT; -+ break; -+ case -DWC_E_OVERFLOW: -+ status = -EOVERFLOW; -+ break; -+ case -DWC_E_SHUTDOWN: -+ status = -ESHUTDOWN; -+ break; -+ default: -+ if (status) { -+ DWC_PRINTF("Uknown urb status %d\n", status); -+ -+ } -+ } -+ -+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -+ int i; -+ -+ urb->error_count = dwc_otg_hcd_urb_get_error_count(dwc_otg_urb); -+ for (i = 0; i < urb->number_of_packets; ++i) { -+ urb->iso_frame_desc[i].actual_length = -+ dwc_otg_hcd_urb_get_iso_desc_actual_length -+ (dwc_otg_urb, i); -+ urb->iso_frame_desc[i].status = -+ dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_urb, i); -+ } -+ } -+ -+ urb->status = status; -+ urb->hcpriv = NULL; -+ if (!status) { -+ if ((urb->transfer_flags & URB_SHORT_NOT_OK) && -+ (urb->actual_length < urb->transfer_buffer_length)) { -+ urb->status = -EREMOTEIO; -+ } -+ } -+ -+ if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) || -+ (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { -+ struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb); -+ if (ep) { -+ free_bus_bandwidth(dwc_otg_hcd_to_hcd(hcd), -+ dwc_otg_hcd_get_ep_bandwidth(hcd, -+ ep->hcpriv), -+ urb); -+ } -+ } -+ DWC_FREE(dwc_otg_urb); -+ if (!new_entry) { -+ DWC_ERROR("dwc_otg_hcd: complete: cannot allocate URB TQ entry\n"); -+ urb->status = -EPROTO; -+ /* don't schedule the tasklet - -+ * directly return the packet here with error. */ -+#if USB_URB_EP_LINKING -+ usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb); -+#endif -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb); -+#else -+ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, urb->status); -+#endif -+ } else { -+ new_entry->urb = urb; -+#if USB_URB_EP_LINKING -+ rc = usb_hcd_check_unlink_urb(dwc_otg_hcd_to_hcd(hcd), urb, urb->status); -+ if(0 == rc) { -+ usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb); -+ } -+#endif -+ if(0 == rc) { -+ DWC_TAILQ_INSERT_TAIL(&hcd->completed_urb_list, new_entry, -+ urb_tq_entries); -+ DWC_TASK_HI_SCHEDULE(hcd->completion_tasklet); -+ } -+ } -+ return 0; -+} -+ -+static struct dwc_otg_hcd_function_ops hcd_fops = { -+ .start = _start, -+ .disconnect = _disconnect, -+ .hub_info = _hub_info, -+ .speed = _speed, -+ .complete = _complete, -+ .get_b_hnp_enable = _get_b_hnp_enable, -+}; -+ -+static struct fiq_handler fh = { -+ .name = "usb_fiq", -+}; -+ -+static void hcd_init_fiq(void *cookie) -+{ -+ dwc_otg_device_t *otg_dev = cookie; -+ dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd; -+ struct pt_regs regs; -+ int irq; -+ -+ if (claim_fiq(&fh)) { -+ DWC_ERROR("Can't claim FIQ"); -+ BUG(); -+ } -+ DWC_WARN("FIQ on core %d at 0x%08x", -+ smp_processor_id(), -+ (fiq_fsm_enable ? (int)&dwc_otg_fiq_fsm : (int)&dwc_otg_fiq_nop)); -+ DWC_WARN("FIQ ASM at 0x%08x length %d", (int)&_dwc_otg_fiq_stub, (int)(&_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub)); -+ set_fiq_handler((void *) &_dwc_otg_fiq_stub, &_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub); -+ memset(®s,0,sizeof(regs)); -+ -+ regs.ARM_r8 = (long) dwc_otg_hcd->fiq_state; -+ if (fiq_fsm_enable) { -+ regs.ARM_r9 = dwc_otg_hcd->core_if->core_params->host_channels; -+ //regs.ARM_r10 = dwc_otg_hcd->dma; -+ regs.ARM_fp = (long) dwc_otg_fiq_fsm; -+ } else { -+ regs.ARM_fp = (long) dwc_otg_fiq_nop; -+ } -+ -+ regs.ARM_sp = (long) dwc_otg_hcd->fiq_stack + (sizeof(struct fiq_stack) - 4); -+ -+// __show_regs(®s); -+ set_fiq_regs(®s); -+ -+ //Set the mphi periph to the required registers -+ dwc_otg_hcd->fiq_state->mphi_regs.base = otg_dev->os_dep.mphi_base; -+ dwc_otg_hcd->fiq_state->mphi_regs.ctrl = otg_dev->os_dep.mphi_base + 0x4c; -+ dwc_otg_hcd->fiq_state->mphi_regs.outdda = otg_dev->os_dep.mphi_base + 0x28; -+ dwc_otg_hcd->fiq_state->mphi_regs.outddb = otg_dev->os_dep.mphi_base + 0x2c; -+ dwc_otg_hcd->fiq_state->mphi_regs.intstat = otg_dev->os_dep.mphi_base + 0x50; -+ dwc_otg_hcd->fiq_state->dwc_regs_base = otg_dev->os_dep.base; -+ DWC_WARN("MPHI regs_base at 0x%08x", (int)dwc_otg_hcd->fiq_state->mphi_regs.base); -+ //Enable mphi peripheral -+ writel((1<<31),dwc_otg_hcd->fiq_state->mphi_regs.ctrl); -+#ifdef DEBUG -+ if (readl(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & 0x80000000) -+ DWC_WARN("MPHI periph has been enabled"); -+ else -+ DWC_WARN("MPHI periph has NOT been enabled"); -+#endif -+ // Enable FIQ interrupt from USB peripheral -+#ifdef CONFIG_MULTI_IRQ_HANDLER -+ irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); -+#else -+ irq = INTERRUPT_VC_USB; -+#endif -+ if (irq < 0) { -+ DWC_ERROR("Can't get FIQ irq"); -+ return; -+ } -+ enable_fiq(irq); -+ local_fiq_enable(); -+} -+ -+/** -+ * Initializes the HCD. This function allocates memory for and initializes the -+ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the -+ * USB bus with the core and calls the hc_driver->start() function. It returns -+ * a negative error on failure. -+ */ -+int hcd_init(dwc_bus_dev_t *_dev) -+{ -+ struct usb_hcd *hcd = NULL; -+ dwc_otg_hcd_t *dwc_otg_hcd = NULL; -+ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); -+ int retval = 0; -+ u64 dmamask; -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT otg_dev=%p\n", otg_dev); -+ -+ /* Set device flags indicating whether the HCD supports DMA. */ -+ if (dwc_otg_is_dma_enable(otg_dev->core_if)) -+ dmamask = DMA_BIT_MASK(32); -+ else -+ dmamask = 0; -+ -+#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) -+ dma_set_mask(&_dev->dev, dmamask); -+ dma_set_coherent_mask(&_dev->dev, dmamask); -+#elif defined(PCI_INTERFACE) -+ pci_set_dma_mask(_dev, dmamask); -+ pci_set_consistent_dma_mask(_dev, dmamask); -+#endif -+ -+ /* -+ * Allocate memory for the base HCD plus the DWC OTG HCD. -+ * Initialize the base HCD. -+ */ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) -+ hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, _dev->dev.bus_id); -+#else -+ hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, dev_name(&_dev->dev)); -+ hcd->has_tt = 1; -+// hcd->uses_new_polling = 1; -+// hcd->poll_rh = 0; -+#endif -+ if (!hcd) { -+ retval = -ENOMEM; -+ goto error1; -+ } -+ -+ hcd->regs = otg_dev->os_dep.base; -+ -+ -+ /* Initialize the DWC OTG HCD. */ -+ dwc_otg_hcd = dwc_otg_hcd_alloc_hcd(); -+ if (!dwc_otg_hcd) { -+ goto error2; -+ } -+ ((struct wrapper_priv_data *)(hcd->hcd_priv))->dwc_otg_hcd = -+ dwc_otg_hcd; -+ otg_dev->hcd = dwc_otg_hcd; -+ otg_dev->hcd->otg_dev = otg_dev; -+ -+ if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) { -+ goto error2; -+ } -+ -+ if (fiq_enable) { -+ if (num_online_cpus() > 1) { -+ /* bcm2709: can run the FIQ on a separate core to IRQs */ -+ smp_call_function_single(1, hcd_init_fiq, otg_dev, 1); -+ } else { -+ smp_call_function_single(0, hcd_init_fiq, otg_dev, 1); -+ } -+ } -+ -+ hcd->self.otg_port = dwc_otg_hcd_otg_port(dwc_otg_hcd); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33) //don't support for LM(with 2.6.20.1 kernel) -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) //version field absent later -+ hcd->self.otg_version = dwc_otg_get_otg_version(otg_dev->core_if); -+#endif -+ /* Don't support SG list at this point */ -+ hcd->self.sg_tablesize = 0; -+#endif -+ /* -+ * Finish generic HCD initialization and start the HCD. This function -+ * allocates the DMA buffer pool, registers the USB bus, requests the -+ * IRQ line, and calls hcd_start method. -+ */ -+#ifdef PLATFORM_INTERFACE -+ retval = usb_add_hcd(hcd, platform_get_irq(_dev, fiq_enable ? 0 : 1), IRQF_SHARED); -+#else -+ retval = usb_add_hcd(hcd, _dev->irq, IRQF_SHARED); -+#endif -+ if (retval < 0) { -+ goto error2; -+ } -+ -+ dwc_otg_hcd_set_priv_data(dwc_otg_hcd, hcd); -+ return 0; -+ -+error2: -+ usb_put_hcd(hcd); -+error1: -+ return retval; -+} -+ -+/** -+ * Removes the HCD. -+ * Frees memory and resources associated with the HCD and deregisters the bus. -+ */ -+void hcd_remove(dwc_bus_dev_t *_dev) -+{ -+ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); -+ dwc_otg_hcd_t *dwc_otg_hcd; -+ struct usb_hcd *hcd; -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE otg_dev=%p\n", otg_dev); -+ -+ if (!otg_dev) { -+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); -+ return; -+ } -+ -+ dwc_otg_hcd = otg_dev->hcd; -+ -+ if (!dwc_otg_hcd) { -+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); -+ return; -+ } -+ -+ hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd); -+ -+ if (!hcd) { -+ DWC_DEBUGPL(DBG_ANY, -+ "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n", -+ __func__); -+ return; -+ } -+ usb_remove_hcd(hcd); -+ dwc_otg_hcd_set_priv_data(dwc_otg_hcd, NULL); -+ dwc_otg_hcd_remove(dwc_otg_hcd); -+ usb_put_hcd(hcd); -+} -+ -+/* ========================================================================= -+ * Linux HC Driver Functions -+ * ========================================================================= */ -+ -+/** Initializes the DWC_otg controller and its root hub and prepares it for host -+ * mode operation. Activates the root port. Returns 0 on success and a negative -+ * error code on failure. */ -+int hcd_start(struct usb_hcd *hcd) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ struct usb_bus *bus; -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n"); -+ bus = hcd_to_bus(hcd); -+ -+ hcd->state = HC_STATE_RUNNING; -+ if (dwc_otg_hcd_start(dwc_otg_hcd, &hcd_fops)) { -+ return 0; -+ } -+ -+ /* Initialize and connect root hub if one is not already attached */ -+ if (bus->root_hub) { -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n"); -+ /* Inform the HUB driver to resume. */ -+ usb_hcd_resume_root_hub(hcd); -+ } -+ -+ return 0; -+} -+ -+/** -+ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are -+ * stopped. -+ */ -+void hcd_stop(struct usb_hcd *hcd) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ -+ dwc_otg_hcd_stop(dwc_otg_hcd); -+} -+ -+/** Returns the current frame number. */ -+static int get_frame_number(struct usb_hcd *hcd) -+{ -+ hprt0_data_t hprt0; -+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); -+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) -+ return dwc_otg_hcd_get_frame_number(dwc_otg_hcd) >> 3; -+ else -+ return dwc_otg_hcd_get_frame_number(dwc_otg_hcd); -+} -+ -+#ifdef DEBUG -+static void dump_urb_info(struct urb *urb, char *fn_name) -+{ -+ DWC_PRINTF("%s, urb %p\n", fn_name, urb); -+ DWC_PRINTF(" Device address: %d\n", usb_pipedevice(urb->pipe)); -+ DWC_PRINTF(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe), -+ (usb_pipein(urb->pipe) ? "IN" : "OUT")); -+ DWC_PRINTF(" Endpoint type: %s\n", ( { -+ char *pipetype; -+ switch (usb_pipetype(urb->pipe)) { -+case PIPE_CONTROL: -+pipetype = "CONTROL"; break; case PIPE_BULK: -+pipetype = "BULK"; break; case PIPE_INTERRUPT: -+pipetype = "INTERRUPT"; break; case PIPE_ISOCHRONOUS: -+pipetype = "ISOCHRONOUS"; break; default: -+ pipetype = "UNKNOWN"; break;}; -+ pipetype;} -+ )) ; -+ DWC_PRINTF(" Speed: %s\n", ( { -+ char *speed; switch (urb->dev->speed) { -+case USB_SPEED_HIGH: -+speed = "HIGH"; break; case USB_SPEED_FULL: -+speed = "FULL"; break; case USB_SPEED_LOW: -+speed = "LOW"; break; default: -+ speed = "UNKNOWN"; break;}; -+ speed;} -+ )) ; -+ DWC_PRINTF(" Max packet size: %d\n", -+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); -+ DWC_PRINTF(" Data buffer length: %d\n", urb->transfer_buffer_length); -+ DWC_PRINTF(" Transfer buffer: %p, Transfer DMA: %p\n", -+ urb->transfer_buffer, (void *)urb->transfer_dma); -+ DWC_PRINTF(" Setup buffer: %p, Setup DMA: %p\n", -+ urb->setup_packet, (void *)urb->setup_dma); -+ DWC_PRINTF(" Interval: %d\n", urb->interval); -+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -+ int i; -+ for (i = 0; i < urb->number_of_packets; i++) { -+ DWC_PRINTF(" ISO Desc %d:\n", i); -+ DWC_PRINTF(" offset: %d, length %d\n", -+ urb->iso_frame_desc[i].offset, -+ urb->iso_frame_desc[i].length); -+ } -+ } -+} -+#endif -+ -+/** Starts processing a USB transfer request specified by a USB Request Block -+ * (URB). mem_flags indicates the type of memory allocation to use while -+ * processing this URB. */ -+static int dwc_otg_urb_enqueue(struct usb_hcd *hcd, -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+ struct usb_host_endpoint *ep, -+#endif -+ struct urb *urb, gfp_t mem_flags) -+{ -+ int retval = 0; -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28) -+ struct usb_host_endpoint *ep = urb->ep; -+#endif -+ dwc_irqflags_t irqflags; -+ void **ref_ep_hcpriv = &ep->hcpriv; -+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ dwc_otg_hcd_urb_t *dwc_otg_urb; -+ int i; -+ int alloc_bandwidth = 0; -+ uint8_t ep_type = 0; -+ uint32_t flags = 0; -+ void *buf; -+ -+#ifdef DEBUG -+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { -+ dump_urb_info(urb, "dwc_otg_urb_enqueue"); -+ } -+#endif -+ -+ if (!urb->transfer_buffer && urb->transfer_buffer_length) -+ return -EINVAL; -+ -+ if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) -+ || (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { -+ if (!dwc_otg_hcd_is_bandwidth_allocated -+ (dwc_otg_hcd, ref_ep_hcpriv)) { -+ alloc_bandwidth = 1; -+ } -+ } -+ -+ switch (usb_pipetype(urb->pipe)) { -+ case PIPE_CONTROL: -+ ep_type = USB_ENDPOINT_XFER_CONTROL; -+ break; -+ case PIPE_ISOCHRONOUS: -+ ep_type = USB_ENDPOINT_XFER_ISOC; -+ break; -+ case PIPE_BULK: -+ ep_type = USB_ENDPOINT_XFER_BULK; -+ break; -+ case PIPE_INTERRUPT: -+ ep_type = USB_ENDPOINT_XFER_INT; -+ break; -+ default: -+ DWC_WARN("Wrong EP type - %d\n", usb_pipetype(urb->pipe)); -+ } -+ -+ /* # of packets is often 0 - do we really need to call this then? */ -+ dwc_otg_urb = dwc_otg_hcd_urb_alloc(dwc_otg_hcd, -+ urb->number_of_packets, -+ mem_flags == GFP_ATOMIC ? 1 : 0); -+ -+ if(dwc_otg_urb == NULL) -+ return -ENOMEM; -+ -+ if (!dwc_otg_urb && urb->number_of_packets) -+ return -ENOMEM; -+ -+ dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_urb, usb_pipedevice(urb->pipe), -+ usb_pipeendpoint(urb->pipe), ep_type, -+ usb_pipein(urb->pipe), -+ usb_maxpacket(urb->dev, urb->pipe, -+ !(usb_pipein(urb->pipe)))); -+ -+ buf = urb->transfer_buffer; -+ if (hcd->self.uses_dma && !buf && urb->transfer_buffer_length) { -+ /* -+ * Calculate virtual address from physical address, -+ * because some class driver may not fill transfer_buffer. -+ * In Buffer DMA mode virual address is used, -+ * when handling non DWORD aligned buffers. -+ */ -+ buf = (void *)__bus_to_virt((unsigned long)urb->transfer_dma); -+ dev_warn_once(&urb->dev->dev, -+ "USB transfer_buffer was NULL, will use __bus_to_virt(%pad)=%p\n", -+ &urb->transfer_dma, buf); -+ } -+ -+ if (!(urb->transfer_flags & URB_NO_INTERRUPT)) -+ flags |= URB_GIVEBACK_ASAP; -+ if (urb->transfer_flags & URB_ZERO_PACKET) -+ flags |= URB_SEND_ZERO_PACKET; -+ -+ dwc_otg_hcd_urb_set_params(dwc_otg_urb, urb, buf, -+ urb->transfer_dma, -+ urb->transfer_buffer_length, -+ urb->setup_packet, -+ urb->setup_dma, flags, urb->interval); -+ -+ for (i = 0; i < urb->number_of_packets; ++i) { -+ dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_urb, i, -+ urb-> -+ iso_frame_desc[i].offset, -+ urb-> -+ iso_frame_desc[i].length); -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &irqflags); -+ urb->hcpriv = dwc_otg_urb; -+#if USB_URB_EP_LINKING -+ retval = usb_hcd_link_urb_to_ep(hcd, urb); -+ if (0 == retval) -+#endif -+ { -+ retval = dwc_otg_hcd_urb_enqueue(dwc_otg_hcd, dwc_otg_urb, -+ /*(dwc_otg_qh_t **)*/ -+ ref_ep_hcpriv, 1); -+ if (0 == retval) { -+ if (alloc_bandwidth) { -+ allocate_bus_bandwidth(hcd, -+ dwc_otg_hcd_get_ep_bandwidth( -+ dwc_otg_hcd, *ref_ep_hcpriv), -+ urb); -+ } -+ } else { -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG dwc_otg_hcd_urb_enqueue failed rc %d\n", retval); -+#if USB_URB_EP_LINKING -+ usb_hcd_unlink_urb_from_ep(hcd, urb); -+#endif -+ DWC_FREE(dwc_otg_urb); -+ urb->hcpriv = NULL; -+ if (retval == -DWC_E_NO_DEVICE) -+ retval = -ENODEV; -+ } -+ } -+#if USB_URB_EP_LINKING -+ else -+ { -+ DWC_FREE(dwc_otg_urb); -+ urb->hcpriv = NULL; -+ } -+#endif -+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, irqflags); -+ return retval; -+} -+ -+/** Aborts/cancels a USB transfer request. Always returns 0 to indicate -+ * success. */ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) -+#else -+static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) -+#endif -+{ -+ dwc_irqflags_t flags; -+ dwc_otg_hcd_t *dwc_otg_hcd; -+ int rc; -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n"); -+ -+ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ -+#ifdef DEBUG -+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { -+ dump_urb_info(urb, "dwc_otg_urb_dequeue"); -+ } -+#endif -+ -+ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); -+ rc = usb_hcd_check_unlink_urb(hcd, urb, status); -+ if (0 == rc) { -+ if(urb->hcpriv != NULL) { -+ dwc_otg_hcd_urb_dequeue(dwc_otg_hcd, -+ (dwc_otg_hcd_urb_t *)urb->hcpriv); -+ -+ DWC_FREE(urb->hcpriv); -+ urb->hcpriv = NULL; -+ } -+ } -+ -+ if (0 == rc) { -+ /* Higher layer software sets URB status. */ -+#if USB_URB_EP_LINKING -+ usb_hcd_unlink_urb_from_ep(hcd, urb); -+#endif -+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); -+ -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+ usb_hcd_giveback_urb(hcd, urb); -+#else -+ usb_hcd_giveback_urb(hcd, urb, status); -+#endif -+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { -+ DWC_PRINTF("Called usb_hcd_giveback_urb() \n"); -+ DWC_PRINTF(" 1urb->status = %d\n", urb->status); -+ } -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue OK\n"); -+ } else { -+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue failed - rc %d\n", -+ rc); -+ } -+ -+ return rc; -+} -+ -+/* Frees resources in the DWC_otg controller related to a given endpoint. Also -+ * clears state in the HCD related to the endpoint. Any URBs for the endpoint -+ * must already be dequeued. */ -+static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ -+ DWC_DEBUGPL(DBG_HCD, -+ "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, " -+ "endpoint=%d\n", ep->desc.bEndpointAddress, -+ dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress)); -+ dwc_otg_hcd_endpoint_disable(dwc_otg_hcd, ep->hcpriv, 250); -+ ep->hcpriv = NULL; -+} -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) -+/* Resets endpoint specific parameter values, in current version used to reset -+ * the data toggle(as a WA). This function can be called from usb_clear_halt routine */ -+static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) -+{ -+ dwc_irqflags_t flags; -+ struct usb_device *udev = NULL; -+ int epnum = usb_endpoint_num(&ep->desc); -+ int is_out = usb_endpoint_dir_out(&ep->desc); -+ int is_control = usb_endpoint_xfer_control(&ep->desc); -+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ struct device *dev = DWC_OTG_OS_GETDEV(dwc_otg_hcd->otg_dev->os_dep); -+ -+ if (dev) -+ udev = to_usb_device(dev); -+ else -+ return; -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP RESET: Endpoint Num=0x%02d\n", epnum); -+ -+ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); -+ usb_settoggle(udev, epnum, is_out, 0); -+ if (is_control) -+ usb_settoggle(udev, epnum, !is_out, 0); -+ -+ if (ep->hcpriv) { -+ dwc_otg_hcd_endpoint_reset(dwc_otg_hcd, ep->hcpriv); -+ } -+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); -+} -+#endif -+ -+/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if -+ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid -+ * interrupt. -+ * -+ * This function is called by the USB core when an interrupt occurs */ -+static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ int32_t retval = dwc_otg_hcd_handle_intr(dwc_otg_hcd); -+ if (retval != 0) { -+ S3C2410X_CLEAR_EINTPEND(); -+ } -+ return IRQ_RETVAL(retval); -+} -+ -+/** Creates Status Change bitmap for the root hub and root port. The bitmap is -+ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 -+ * is the status change indicator for the single root port. Returns 1 if either -+ * change indicator is 1, otherwise returns 0. */ -+int hub_status_data(struct usb_hcd *hcd, char *buf) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ -+ buf[0] = 0; -+ buf[0] |= (dwc_otg_hcd_is_status_changed(dwc_otg_hcd, 1)) << 1; -+ -+ return (buf[0] != 0); -+} -+ -+/** Handles hub class-specific requests. */ -+int hub_control(struct usb_hcd *hcd, -+ u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) -+{ -+ int retval; -+ -+ retval = dwc_otg_hcd_hub_control(hcd_to_dwc_otg_hcd(hcd), -+ typeReq, wValue, wIndex, buf, wLength); -+ -+ switch (retval) { -+ case -DWC_E_INVALID: -+ retval = -EINVAL; -+ break; -+ } -+ -+ return retval; -+} -+ -+#endif /* DWC_DEVICE_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c -@@ -0,0 +1,963 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_queue.c $ -+ * $Revision: #44 $ -+ * $Date: 2011/10/26 $ -+ * $Change: 1873028 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_DEVICE_ONLY -+ -+/** -+ * @file -+ * -+ * This file contains the functions to manage Queue Heads and Queue -+ * Transfer Descriptors. -+ */ -+ -+#include "dwc_otg_hcd.h" -+#include "dwc_otg_regs.h" -+ -+extern bool microframe_schedule; -+ -+/** -+ * Free each QTD in the QH's QTD-list then free the QH. QH should already be -+ * removed from a list. QTD list should already be empty if called from URB -+ * Dequeue. -+ * -+ * @param hcd HCD instance. -+ * @param qh The QH to free. -+ */ -+void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ dwc_otg_qtd_t *qtd, *qtd_tmp; -+ dwc_irqflags_t flags; -+ uint32_t buf_size = 0; -+ uint8_t *align_buf_virt = NULL; -+ dwc_dma_t align_buf_dma; -+ struct device *dev = dwc_otg_hcd_to_dev(hcd); -+ -+ /* Free each QTD in the QTD list */ -+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); -+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) { -+ DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry); -+ dwc_otg_hcd_qtd_free(qtd); -+ } -+ -+ if (hcd->core_if->dma_desc_enable) { -+ dwc_otg_hcd_qh_free_ddma(hcd, qh); -+ } else if (qh->dw_align_buf) { -+ if (qh->ep_type == UE_ISOCHRONOUS) { -+ buf_size = 4096; -+ } else { -+ buf_size = hcd->core_if->core_params->max_transfer_size; -+ } -+ align_buf_virt = qh->dw_align_buf; -+ align_buf_dma = qh->dw_align_buf_dma; -+ } -+ -+ DWC_FREE(qh); -+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); -+ if (align_buf_virt) -+ DWC_DMA_FREE(dev, buf_size, align_buf_virt, align_buf_dma); -+ return; -+} -+ -+#define BitStuffTime(bytecount) ((8 * 7* bytecount) / 6) -+#define HS_HOST_DELAY 5 /* nanoseconds */ -+#define FS_LS_HOST_DELAY 1000 /* nanoseconds */ -+#define HUB_LS_SETUP 333 /* nanoseconds */ -+#define NS_TO_US(ns) ((ns + 500) / 1000) -+ /* convert & round nanoseconds to microseconds */ -+ -+static uint32_t calc_bus_time(int speed, int is_in, int is_isoc, int bytecount) -+{ -+ unsigned long retval; -+ -+ switch (speed) { -+ case USB_SPEED_HIGH: -+ if (is_isoc) { -+ retval = -+ ((38 * 8 * 2083) + -+ (2083 * (3 + BitStuffTime(bytecount)))) / 1000 + -+ HS_HOST_DELAY; -+ } else { -+ retval = -+ ((55 * 8 * 2083) + -+ (2083 * (3 + BitStuffTime(bytecount)))) / 1000 + -+ HS_HOST_DELAY; -+ } -+ break; -+ case USB_SPEED_FULL: -+ if (is_isoc) { -+ retval = -+ (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000; -+ if (is_in) { -+ retval = 7268 + FS_LS_HOST_DELAY + retval; -+ } else { -+ retval = 6265 + FS_LS_HOST_DELAY + retval; -+ } -+ } else { -+ retval = -+ (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000; -+ retval = 9107 + FS_LS_HOST_DELAY + retval; -+ } -+ break; -+ case USB_SPEED_LOW: -+ if (is_in) { -+ retval = -+ (67667 * (31 + 10 * BitStuffTime(bytecount))) / -+ 1000; -+ retval = -+ 64060 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY + -+ retval; -+ } else { -+ retval = -+ (66700 * (31 + 10 * BitStuffTime(bytecount))) / -+ 1000; -+ retval = -+ 64107 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY + -+ retval; -+ } -+ break; -+ default: -+ DWC_WARN("Unknown device speed\n"); -+ retval = -1; -+ } -+ -+ return NS_TO_US(retval); -+} -+ -+/** -+ * Initializes a QH structure. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh The QH to init. -+ * @param urb Holds the information about the device/endpoint that we need -+ * to initialize the QH. -+ */ -+#define SCHEDULE_SLOP 10 -+void qh_init(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, dwc_otg_hcd_urb_t * urb) -+{ -+ char *speed, *type; -+ int dev_speed; -+ uint32_t hub_addr, hub_port; -+ -+ dwc_memset(qh, 0, sizeof(dwc_otg_qh_t)); -+ -+ /* Initialize QH */ -+ qh->ep_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); -+ qh->ep_is_in = dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0; -+ -+ qh->data_toggle = DWC_OTG_HC_PID_DATA0; -+ qh->maxp = dwc_otg_hcd_get_mps(&urb->pipe_info); -+ DWC_CIRCLEQ_INIT(&qh->qtd_list); -+ DWC_LIST_INIT(&qh->qh_list_entry); -+ qh->channel = NULL; -+ -+ /* FS/LS Enpoint on HS Hub -+ * NOT virtual root hub */ -+ dev_speed = hcd->fops->speed(hcd, urb->priv); -+ -+ hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &hub_port); -+ qh->do_split = 0; -+ if (microframe_schedule) -+ qh->speed = dev_speed; -+ -+ qh->nak_frame = 0xffff; -+ -+ if (((dev_speed == USB_SPEED_LOW) || -+ (dev_speed == USB_SPEED_FULL)) && -+ (hub_addr != 0 && hub_addr != 1)) { -+ DWC_DEBUGPL(DBG_HCD, -+ "QH init: EP %d: TT found at hub addr %d, for port %d\n", -+ dwc_otg_hcd_get_ep_num(&urb->pipe_info), hub_addr, -+ hub_port); -+ qh->do_split = 1; -+ qh->skip_count = 0; -+ } -+ -+ if (qh->ep_type == UE_INTERRUPT || qh->ep_type == UE_ISOCHRONOUS) { -+ /* Compute scheduling parameters once and save them. */ -+ hprt0_data_t hprt; -+ -+ /** @todo Account for split transfers in the bus time. */ -+ int bytecount = -+ dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp); -+ -+ qh->usecs = -+ calc_bus_time((qh->do_split ? USB_SPEED_HIGH : dev_speed), -+ qh->ep_is_in, (qh->ep_type == UE_ISOCHRONOUS), -+ bytecount); -+ /* Start in a slightly future (micro)frame. */ -+ qh->sched_frame = dwc_frame_num_inc(hcd->frame_number, -+ SCHEDULE_SLOP); -+ qh->interval = urb->interval; -+ -+#if 0 -+ /* Increase interrupt polling rate for debugging. */ -+ if (qh->ep_type == UE_INTERRUPT) { -+ qh->interval = 8; -+ } -+#endif -+ hprt.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0); -+ if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) && -+ ((dev_speed == USB_SPEED_LOW) || -+ (dev_speed == USB_SPEED_FULL))) { -+ qh->interval *= 8; -+ qh->sched_frame |= 0x7; -+ qh->start_split_frame = qh->sched_frame; -+ } -+ -+ } -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n"); -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", qh); -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n", -+ dwc_otg_hcd_get_dev_addr(&urb->pipe_info)); -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n", -+ dwc_otg_hcd_get_ep_num(&urb->pipe_info), -+ dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT"); -+ switch (dev_speed) { -+ case USB_SPEED_LOW: -+ qh->dev_speed = DWC_OTG_EP_SPEED_LOW; -+ speed = "low"; -+ break; -+ case USB_SPEED_FULL: -+ qh->dev_speed = DWC_OTG_EP_SPEED_FULL; -+ speed = "full"; -+ break; -+ case USB_SPEED_HIGH: -+ qh->dev_speed = DWC_OTG_EP_SPEED_HIGH; -+ speed = "high"; -+ break; -+ default: -+ speed = "?"; -+ break; -+ } -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n", speed); -+ -+ switch (qh->ep_type) { -+ case UE_ISOCHRONOUS: -+ type = "isochronous"; -+ break; -+ case UE_INTERRUPT: -+ type = "interrupt"; -+ break; -+ case UE_CONTROL: -+ type = "control"; -+ break; -+ case UE_BULK: -+ type = "bulk"; -+ break; -+ default: -+ type = "?"; -+ break; -+ } -+ -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n", type); -+ -+#ifdef DEBUG -+ if (qh->ep_type == UE_INTERRUPT) { -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n", -+ qh->usecs); -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n", -+ qh->interval); -+ } -+#endif -+ -+} -+ -+/** -+ * This function allocates and initializes a QH. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param urb Holds the information about the device/endpoint that we need -+ * to initialize the QH. -+ * @param atomic_alloc Flag to do atomic allocation if needed -+ * -+ * @return Returns pointer to the newly allocated QH, or NULL on error. */ -+dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd, -+ dwc_otg_hcd_urb_t * urb, int atomic_alloc) -+{ -+ dwc_otg_qh_t *qh; -+ -+ /* Allocate memory */ -+ /** @todo add memflags argument */ -+ qh = dwc_otg_hcd_qh_alloc(atomic_alloc); -+ if (qh == NULL) { -+ DWC_ERROR("qh allocation failed"); -+ return NULL; -+ } -+ -+ qh_init(hcd, qh, urb); -+ -+ if (hcd->core_if->dma_desc_enable -+ && (dwc_otg_hcd_qh_init_ddma(hcd, qh) < 0)) { -+ dwc_otg_hcd_qh_free(hcd, qh); -+ return NULL; -+ } -+ -+ return qh; -+} -+ -+/* microframe_schedule=0 start */ -+ -+/** -+ * Checks that a channel is available for a periodic transfer. -+ * -+ * @return 0 if successful, negative error code otherise. -+ */ -+static int periodic_channel_available(dwc_otg_hcd_t * hcd) -+{ -+ /* -+ * Currently assuming that there is a dedicated host channnel for each -+ * periodic transaction plus at least one host channel for -+ * non-periodic transactions. -+ */ -+ int status; -+ int num_channels; -+ -+ num_channels = hcd->core_if->core_params->host_channels; -+ if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels) -+ && (hcd->periodic_channels < num_channels - 1)) { -+ status = 0; -+ } else { -+ DWC_INFO("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n", -+ __func__, num_channels, hcd->periodic_channels, hcd->non_periodic_channels); //NOTICE -+ status = -DWC_E_NO_SPACE; -+ } -+ -+ return status; -+} -+ -+/** -+ * Checks that there is sufficient bandwidth for the specified QH in the -+ * periodic schedule. For simplicity, this calculation assumes that all the -+ * transfers in the periodic schedule may occur in the same (micro)frame. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh QH containing periodic bandwidth required. -+ * -+ * @return 0 if successful, negative error code otherwise. -+ */ -+static int check_periodic_bandwidth(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ int status; -+ int16_t max_claimed_usecs; -+ -+ status = 0; -+ -+ if ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) || qh->do_split) { -+ /* -+ * High speed mode. -+ * Max periodic usecs is 80% x 125 usec = 100 usec. -+ */ -+ -+ max_claimed_usecs = 100 - qh->usecs; -+ } else { -+ /* -+ * Full speed mode. -+ * Max periodic usecs is 90% x 1000 usec = 900 usec. -+ */ -+ max_claimed_usecs = 900 - qh->usecs; -+ } -+ -+ if (hcd->periodic_usecs > max_claimed_usecs) { -+ DWC_INFO("%s: already claimed usecs %d, required usecs %d\n", __func__, hcd->periodic_usecs, qh->usecs); //NOTICE -+ status = -DWC_E_NO_SPACE; -+ } -+ -+ return status; -+} -+ -+/* microframe_schedule=0 end */ -+ -+/** -+ * Microframe scheduler -+ * track the total use in hcd->frame_usecs -+ * keep each qh use in qh->frame_usecs -+ * when surrendering the qh then donate the time back -+ */ -+const unsigned short max_uframe_usecs[]={ 100, 100, 100, 100, 100, 100, 30, 0 }; -+ -+/* -+ * called from dwc_otg_hcd.c:dwc_otg_hcd_init -+ */ -+int init_hcd_usecs(dwc_otg_hcd_t *_hcd) -+{ -+ int i; -+ for (i=0; i<8; i++) { -+ _hcd->frame_usecs[i] = max_uframe_usecs[i]; -+ } -+ return 0; -+} -+ -+static int find_single_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) -+{ -+ int i; -+ unsigned short utime; -+ int t_left; -+ int ret; -+ int done; -+ -+ ret = -1; -+ utime = _qh->usecs; -+ t_left = utime; -+ i = 0; -+ done = 0; -+ while (done == 0) { -+ /* At the start _hcd->frame_usecs[i] = max_uframe_usecs[i]; */ -+ if (utime <= _hcd->frame_usecs[i]) { -+ _hcd->frame_usecs[i] -= utime; -+ _qh->frame_usecs[i] += utime; -+ t_left -= utime; -+ ret = i; -+ done = 1; -+ return ret; -+ } else { -+ i++; -+ if (i == 8) { -+ done = 1; -+ ret = -1; -+ } -+ } -+ } -+ return ret; -+ } -+ -+/* -+ * use this for FS apps that can span multiple uframes -+ */ -+static int find_multi_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) -+{ -+ int i; -+ int j; -+ unsigned short utime; -+ int t_left; -+ int ret; -+ int done; -+ unsigned short xtime; -+ -+ ret = -1; -+ utime = _qh->usecs; -+ t_left = utime; -+ i = 0; -+ done = 0; -+loop: -+ while (done == 0) { -+ if(_hcd->frame_usecs[i] <= 0) { -+ i++; -+ if (i == 8) { -+ done = 1; -+ ret = -1; -+ } -+ goto loop; -+ } -+ -+ /* -+ * we need n consecutive slots -+ * so use j as a start slot j plus j+1 must be enough time (for now) -+ */ -+ xtime= _hcd->frame_usecs[i]; -+ for (j = i+1 ; j < 8 ; j++ ) { -+ /* -+ * if we add this frame remaining time to xtime we may -+ * be OK, if not we need to test j for a complete frame -+ */ -+ if ((xtime+_hcd->frame_usecs[j]) < utime) { -+ if (_hcd->frame_usecs[j] < max_uframe_usecs[j]) { -+ j = 8; -+ ret = -1; -+ continue; -+ } -+ } -+ if (xtime >= utime) { -+ ret = i; -+ j = 8; /* stop loop with a good value ret */ -+ continue; -+ } -+ /* add the frame time to x time */ -+ xtime += _hcd->frame_usecs[j]; -+ /* we must have a fully available next frame or break */ -+ if ((xtime < utime) -+ && (_hcd->frame_usecs[j] == max_uframe_usecs[j])) { -+ ret = -1; -+ j = 8; /* stop loop with a bad value ret */ -+ continue; -+ } -+ } -+ if (ret >= 0) { -+ t_left = utime; -+ for (j = i; (t_left>0) && (j < 8); j++ ) { -+ t_left -= _hcd->frame_usecs[j]; -+ if ( t_left <= 0 ) { -+ _qh->frame_usecs[j] += _hcd->frame_usecs[j] + t_left; -+ _hcd->frame_usecs[j]= -t_left; -+ ret = i; -+ done = 1; -+ } else { -+ _qh->frame_usecs[j] += _hcd->frame_usecs[j]; -+ _hcd->frame_usecs[j] = 0; -+ } -+ } -+ } else { -+ i++; -+ if (i == 8) { -+ done = 1; -+ ret = -1; -+ } -+ } -+ } -+ return ret; -+} -+ -+static int find_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) -+{ -+ int ret; -+ ret = -1; -+ -+ if (_qh->speed == USB_SPEED_HIGH) { -+ /* if this is a hs transaction we need a full frame */ -+ ret = find_single_uframe(_hcd, _qh); -+ } else { -+ /* if this is a fs transaction we may need a sequence of frames */ -+ ret = find_multi_uframe(_hcd, _qh); -+ } -+ return ret; -+} -+ -+/** -+ * Checks that the max transfer size allowed in a host channel is large enough -+ * to handle the maximum data transfer in a single (micro)frame for a periodic -+ * transfer. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh QH for a periodic endpoint. -+ * -+ * @return 0 if successful, negative error code otherwise. -+ */ -+static int check_max_xfer_size(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ int status; -+ uint32_t max_xfer_size; -+ uint32_t max_channel_xfer_size; -+ -+ status = 0; -+ -+ max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp); -+ max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size; -+ -+ if (max_xfer_size > max_channel_xfer_size) { -+ DWC_INFO("%s: Periodic xfer length %d > " "max xfer length for channel %d\n", -+ __func__, max_xfer_size, max_channel_xfer_size); //NOTICE -+ status = -DWC_E_NO_SPACE; -+ } -+ -+ return status; -+} -+ -+ -+ -+/** -+ * Schedules an interrupt or isochronous transfer in the periodic schedule. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh QH for the periodic transfer. The QH should already contain the -+ * scheduling information. -+ * -+ * @return 0 if successful, negative error code otherwise. -+ */ -+static int schedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ int status = 0; -+ -+ if (microframe_schedule) { -+ int frame; -+ status = find_uframe(hcd, qh); -+ frame = -1; -+ if (status == 0) { -+ frame = 7; -+ } else { -+ if (status > 0 ) -+ frame = status-1; -+ } -+ -+ /* Set the new frame up */ -+ if (frame > -1) { -+ qh->sched_frame &= ~0x7; -+ qh->sched_frame |= (frame & 7); -+ } -+ -+ if (status != -1) -+ status = 0; -+ } else { -+ status = periodic_channel_available(hcd); -+ if (status) { -+ DWC_INFO("%s: No host channel available for periodic " "transfer.\n", __func__); //NOTICE -+ return status; -+ } -+ -+ status = check_periodic_bandwidth(hcd, qh); -+ } -+ if (status) { -+ DWC_INFO("%s: Insufficient periodic bandwidth for " -+ "periodic transfer.\n", __func__); -+ return status; -+ } -+ status = check_max_xfer_size(hcd, qh); -+ if (status) { -+ DWC_INFO("%s: Channel max transfer size too small " -+ "for periodic transfer.\n", __func__); -+ return status; -+ } -+ -+ if (hcd->core_if->dma_desc_enable) { -+ /* Don't rely on SOF and start in ready schedule */ -+ DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_ready, &qh->qh_list_entry); -+ } -+ else { -+ if(fiq_enable && (DWC_LIST_EMPTY(&hcd->periodic_sched_inactive) || dwc_frame_num_le(qh->sched_frame, hcd->fiq_state->next_sched_frame))) -+ { -+ hcd->fiq_state->next_sched_frame = qh->sched_frame; -+ -+ } -+ /* Always start in the inactive schedule. */ -+ DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_inactive, &qh->qh_list_entry); -+ } -+ -+ if (!microframe_schedule) { -+ /* Reserve the periodic channel. */ -+ hcd->periodic_channels++; -+ } -+ -+ /* Update claimed usecs per (micro)frame. */ -+ hcd->periodic_usecs += qh->usecs; -+ -+ return status; -+} -+ -+ -+/** -+ * This function adds a QH to either the non periodic or periodic schedule if -+ * it is not already in the schedule. If the QH is already in the schedule, no -+ * action is taken. -+ * -+ * @return 0 if successful, negative error code otherwise. -+ */ -+int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ int status = 0; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) { -+ /* QH already in a schedule. */ -+ return status; -+ } -+ -+ /* Add the new QH to the appropriate schedule */ -+ if (dwc_qh_is_non_per(qh)) { -+ /* Always start in the inactive schedule. */ -+ DWC_LIST_INSERT_TAIL(&hcd->non_periodic_sched_inactive, -+ &qh->qh_list_entry); -+ //hcd->fiq_state->kick_np_queues = 1; -+ } else { -+ status = schedule_periodic(hcd, qh); -+ if ( !hcd->periodic_qh_count ) { -+ intr_mask.b.sofintr = 1; -+ if (fiq_enable) { -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&hcd->fiq_state->lock); -+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, intr_mask.d32); -+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } else { -+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, intr_mask.d32); -+ } -+ } -+ hcd->periodic_qh_count++; -+ } -+ -+ return status; -+} -+ -+/** -+ * Removes an interrupt or isochronous transfer from the periodic schedule. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh QH for the periodic transfer. -+ */ -+static void deschedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ int i; -+ DWC_LIST_REMOVE_INIT(&qh->qh_list_entry); -+ -+ /* Update claimed usecs per (micro)frame. */ -+ hcd->periodic_usecs -= qh->usecs; -+ -+ if (!microframe_schedule) { -+ /* Release the periodic channel reservation. */ -+ hcd->periodic_channels--; -+ } else { -+ for (i = 0; i < 8; i++) { -+ hcd->frame_usecs[i] += qh->frame_usecs[i]; -+ qh->frame_usecs[i] = 0; -+ } -+ } -+} -+ -+/** -+ * Removes a QH from either the non-periodic or periodic schedule. Memory is -+ * not freed. -+ * -+ * @param hcd The HCD state structure. -+ * @param qh QH to remove from schedule. */ -+void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ if (DWC_LIST_EMPTY(&qh->qh_list_entry)) { -+ /* QH is not in a schedule. */ -+ return; -+ } -+ -+ if (dwc_qh_is_non_per(qh)) { -+ if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) { -+ hcd->non_periodic_qh_ptr = -+ hcd->non_periodic_qh_ptr->next; -+ } -+ DWC_LIST_REMOVE_INIT(&qh->qh_list_entry); -+ //if (!DWC_LIST_EMPTY(&hcd->non_periodic_sched_inactive)) -+ // hcd->fiq_state->kick_np_queues = 1; -+ } else { -+ deschedule_periodic(hcd, qh); -+ hcd->periodic_qh_count--; -+ if( !hcd->periodic_qh_count && !fiq_fsm_enable ) { -+ intr_mask.b.sofintr = 1; -+ if (fiq_enable) { -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&hcd->fiq_state->lock); -+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, 0); -+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } else { -+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, 0); -+ } -+ } -+ } -+} -+ -+/** -+ * Deactivates a QH. For non-periodic QHs, removes the QH from the active -+ * non-periodic schedule. The QH is added to the inactive non-periodic -+ * schedule if any QTDs are still attached to the QH. -+ * -+ * For periodic QHs, the QH is removed from the periodic queued schedule. If -+ * there are any QTDs still attached to the QH, the QH is added to either the -+ * periodic inactive schedule or the periodic ready schedule and its next -+ * scheduled frame is calculated. The QH is placed in the ready schedule if -+ * the scheduled frame has been reached already. Otherwise it's placed in the -+ * inactive schedule. If there are no QTDs attached to the QH, the QH is -+ * completely removed from the periodic schedule. -+ */ -+void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, -+ int sched_next_periodic_split) -+{ -+ if (dwc_qh_is_non_per(qh)) { -+ dwc_otg_hcd_qh_remove(hcd, qh); -+ if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { -+ /* Add back to inactive non-periodic schedule. */ -+ dwc_otg_hcd_qh_add(hcd, qh); -+ //hcd->fiq_state->kick_np_queues = 1; -+ } -+ } else { -+ uint16_t frame_number = dwc_otg_hcd_get_frame_number(hcd); -+ -+ if (qh->do_split) { -+ /* Schedule the next continuing periodic split transfer */ -+ if (sched_next_periodic_split) { -+ -+ qh->sched_frame = frame_number; -+ -+ if (dwc_frame_num_le(frame_number, -+ dwc_frame_num_inc -+ (qh->start_split_frame, -+ 1))) { -+ /* -+ * Allow one frame to elapse after start -+ * split microframe before scheduling -+ * complete split, but DONT if we are -+ * doing the next start split in the -+ * same frame for an ISOC out. -+ */ -+ if ((qh->ep_type != UE_ISOCHRONOUS) || -+ (qh->ep_is_in != 0)) { -+ qh->sched_frame = -+ dwc_frame_num_inc(qh->sched_frame, 1); -+ } -+ } -+ } else { -+ qh->sched_frame = -+ dwc_frame_num_inc(qh->start_split_frame, -+ qh->interval); -+ if (dwc_frame_num_le -+ (qh->sched_frame, frame_number)) { -+ qh->sched_frame = frame_number; -+ } -+ qh->sched_frame |= 0x7; -+ qh->start_split_frame = qh->sched_frame; -+ } -+ } else { -+ qh->sched_frame = -+ dwc_frame_num_inc(qh->sched_frame, qh->interval); -+ if (dwc_frame_num_le(qh->sched_frame, frame_number)) { -+ qh->sched_frame = frame_number; -+ } -+ } -+ -+ if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { -+ dwc_otg_hcd_qh_remove(hcd, qh); -+ } else { -+ /* -+ * Remove from periodic_sched_queued and move to -+ * appropriate queue. -+ */ -+ if ((microframe_schedule && dwc_frame_num_le(qh->sched_frame, frame_number)) || -+ (!microframe_schedule && qh->sched_frame == frame_number)) { -+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready, -+ &qh->qh_list_entry); -+ } else { -+ if(fiq_enable && !dwc_frame_num_le(hcd->fiq_state->next_sched_frame, qh->sched_frame)) -+ { -+ hcd->fiq_state->next_sched_frame = qh->sched_frame; -+ } -+ -+ DWC_LIST_MOVE_HEAD -+ (&hcd->periodic_sched_inactive, -+ &qh->qh_list_entry); -+ } -+ } -+ } -+} -+ -+/** -+ * This function allocates and initializes a QTD. -+ * -+ * @param urb The URB to create a QTD from. Each URB-QTD pair will end up -+ * pointing to each other so each pair should have a unique correlation. -+ * @param atomic_alloc Flag to do atomic alloc if needed -+ * -+ * @return Returns pointer to the newly allocated QTD, or NULL on error. */ -+dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb, int atomic_alloc) -+{ -+ dwc_otg_qtd_t *qtd; -+ -+ qtd = dwc_otg_hcd_qtd_alloc(atomic_alloc); -+ if (qtd == NULL) { -+ return NULL; -+ } -+ -+ dwc_otg_hcd_qtd_init(qtd, urb); -+ return qtd; -+} -+ -+/** -+ * Initializes a QTD structure. -+ * -+ * @param qtd The QTD to initialize. -+ * @param urb The URB to use for initialization. */ -+void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb) -+{ -+ dwc_memset(qtd, 0, sizeof(dwc_otg_qtd_t)); -+ qtd->urb = urb; -+ if (dwc_otg_hcd_get_pipe_type(&urb->pipe_info) == UE_CONTROL) { -+ /* -+ * The only time the QTD data toggle is used is on the data -+ * phase of control transfers. This phase always starts with -+ * DATA1. -+ */ -+ qtd->data_toggle = DWC_OTG_HC_PID_DATA1; -+ qtd->control_phase = DWC_OTG_CONTROL_SETUP; -+ } -+ -+ /* start split */ -+ qtd->complete_split = 0; -+ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; -+ qtd->isoc_split_offset = 0; -+ qtd->in_process = 0; -+ -+ /* Store the qtd ptr in the urb to reference what QTD. */ -+ urb->qtd = qtd; -+ return; -+} -+ -+/** -+ * This function adds a QTD to the QTD-list of a QH. It will find the correct -+ * QH to place the QTD into. If it does not find a QH, then it will create a -+ * new QH. If the QH to which the QTD is added is not currently scheduled, it -+ * is placed into the proper schedule based on its EP type. -+ * HCD lock must be held and interrupts must be disabled on entry -+ * -+ * @param[in] qtd The QTD to add -+ * @param[in] hcd The DWC HCD structure -+ * @param[out] qh out parameter to return queue head -+ * @param atomic_alloc Flag to do atomic alloc if needed -+ * -+ * @return 0 if successful, negative error code otherwise. -+ */ -+int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd, -+ dwc_otg_hcd_t * hcd, dwc_otg_qh_t ** qh, int atomic_alloc) -+{ -+ int retval = 0; -+ dwc_otg_hcd_urb_t *urb = qtd->urb; -+ -+ /* -+ * Get the QH which holds the QTD-list to insert to. Create QH if it -+ * doesn't exist. -+ */ -+ if (*qh == NULL) { -+ *qh = dwc_otg_hcd_qh_create(hcd, urb, atomic_alloc); -+ if (*qh == NULL) { -+ retval = -DWC_E_NO_MEMORY; -+ goto done; -+ } else { -+ if (fiq_enable) -+ hcd->fiq_state->kick_np_queues = 1; -+ } -+ } -+ retval = dwc_otg_hcd_qh_add(hcd, *qh); -+ if (retval == 0) { -+ DWC_CIRCLEQ_INSERT_TAIL(&((*qh)->qtd_list), qtd, -+ qtd_list_entry); -+ qtd->qh = *qh; -+ } -+done: -+ -+ return retval; -+} -+ -+#endif /* DWC_DEVICE_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h -@@ -0,0 +1,188 @@ -+#ifndef _DWC_OS_DEP_H_ -+#define _DWC_OS_DEP_H_ -+ -+/** -+ * @file -+ * -+ * This file contains OS dependent structures. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -+# include -+#endif -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) -+# include -+#else -+# include -+#endif -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) -+# include -+#else -+# include -+#endif -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) -+# include -+#endif -+ -+#ifdef PCI_INTERFACE -+# include -+#endif -+ -+#ifdef LM_INTERFACE -+# include -+# include -+# include -+# include -+# if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) -+# include -+# include -+# include -+# include -+# else -+/* in 2.6.31, at least, we seem to have lost the generic LM infrastructure - -+ here we assume that the machine architecture provides definitions -+ in its own header -+*/ -+# include -+# include -+# endif -+#endif -+ -+#ifdef PLATFORM_INTERFACE -+#include -+#include -+#endif -+ -+/** The OS page size */ -+#define DWC_OS_PAGE_SIZE PAGE_SIZE -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) -+typedef int gfp_t; -+#endif -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) -+# define IRQF_SHARED SA_SHIRQ -+#endif -+ -+typedef struct os_dependent { -+ /** Base address returned from ioremap() */ -+ void *base; -+ -+ /** Register offset for Diagnostic API */ -+ uint32_t reg_offset; -+ -+ /** Base address for MPHI peripheral */ -+ void *mphi_base; -+ -+#ifdef LM_INTERFACE -+ struct lm_device *lmdev; -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *pcidev; -+ -+ /** Start address of a PCI region */ -+ resource_size_t rsrc_start; -+ -+ /** Length address of a PCI region */ -+ resource_size_t rsrc_len; -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *platformdev; -+#endif -+ -+} os_dependent_t; -+ -+#ifdef __cplusplus -+} -+#endif -+ -+ -+ -+/* Type for the our device on the chosen bus */ -+#if defined(LM_INTERFACE) -+typedef struct lm_device dwc_bus_dev_t; -+#elif defined(PCI_INTERFACE) -+typedef struct pci_dev dwc_bus_dev_t; -+#elif defined(PLATFORM_INTERFACE) -+typedef struct platform_device dwc_bus_dev_t; -+#endif -+ -+/* Helper macro to retrieve drvdata from the device on the chosen bus */ -+#if defined(LM_INTERFACE) -+#define DWC_OTG_BUSDRVDATA(_dev) lm_get_drvdata(_dev) -+#elif defined(PCI_INTERFACE) -+#define DWC_OTG_BUSDRVDATA(_dev) pci_get_drvdata(_dev) -+#elif defined(PLATFORM_INTERFACE) -+#define DWC_OTG_BUSDRVDATA(_dev) platform_get_drvdata(_dev) -+#endif -+ -+/** -+ * Helper macro returning the otg_device structure of a given struct device -+ * -+ * c.f. static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev) -+ */ -+#ifdef LM_INTERFACE -+#define DWC_OTG_GETDRVDEV(_var, _dev) do { \ -+ struct lm_device *lm_dev = \ -+ container_of(_dev, struct lm_device, dev); \ -+ _var = lm_get_drvdata(lm_dev); \ -+ } while (0) -+ -+#elif defined(PCI_INTERFACE) -+#define DWC_OTG_GETDRVDEV(_var, _dev) do { \ -+ _var = dev_get_drvdata(_dev); \ -+ } while (0) -+ -+#elif defined(PLATFORM_INTERFACE) -+#define DWC_OTG_GETDRVDEV(_var, _dev) do { \ -+ struct platform_device *platform_dev = \ -+ container_of(_dev, struct platform_device, dev); \ -+ _var = platform_get_drvdata(platform_dev); \ -+ } while (0) -+#endif -+ -+ -+/** -+ * Helper macro returning the struct dev of the given struct os_dependent -+ * -+ * c.f. static struct device *dwc_otg_getdev(struct os_dependent *osdep) -+ */ -+#ifdef LM_INTERFACE -+#define DWC_OTG_OS_GETDEV(_osdep) \ -+ ((_osdep).lmdev == NULL? NULL: &(_osdep).lmdev->dev) -+#elif defined(PCI_INTERFACE) -+#define DWC_OTG_OS_GETDEV(_osdep) \ -+ ((_osdep).pci_dev == NULL? NULL: &(_osdep).pci_dev->dev) -+#elif defined(PLATFORM_INTERFACE) -+#define DWC_OTG_OS_GETDEV(_osdep) \ -+ ((_osdep).platformdev == NULL? NULL: &(_osdep).platformdev->dev) -+#endif -+ -+ -+ -+ -+#endif /* _DWC_OS_DEP_H_ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd.c -@@ -0,0 +1,2725 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $ -+ * $Revision: #101 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_HOST_ONLY -+ -+/** @file -+ * This file implements PCD Core. All code in this file is portable and doesn't -+ * use any OS specific functions. -+ * PCD Core provides Interface, defined in -+ * header file, which can be used to implement OS specific PCD interface. -+ * -+ * An important function of the PCD is managing interrupts generated -+ * by the DWC_otg controller. The implementation of the DWC_otg device -+ * mode interrupt service routines is in dwc_otg_pcd_intr.c. -+ * -+ * @todo Add Device Mode test modes (Test J mode, Test K mode, etc). -+ * @todo Does it work when the request size is greater than DEPTSIZ -+ * transfer size -+ * -+ */ -+ -+#include "dwc_otg_pcd.h" -+ -+#ifdef DWC_UTE_CFI -+#include "dwc_otg_cfi.h" -+ -+extern int init_cfi(cfiobject_t * cfiobj); -+#endif -+ -+/** -+ * Choose endpoint from ep arrays using usb_ep structure. -+ */ -+static dwc_otg_pcd_ep_t *get_ep_from_handle(dwc_otg_pcd_t * pcd, void *handle) -+{ -+ int i; -+ if (pcd->ep0.priv == handle) { -+ return &pcd->ep0; -+ } -+ for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) { -+ if (pcd->in_ep[i].priv == handle) -+ return &pcd->in_ep[i]; -+ if (pcd->out_ep[i].priv == handle) -+ return &pcd->out_ep[i]; -+ } -+ -+ return NULL; -+} -+ -+/** -+ * This function completes a request. It call's the request call back. -+ */ -+void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req, -+ int32_t status) -+{ -+ unsigned stopped = ep->stopped; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(ep %p req %p)\n", __func__, ep, req); -+ DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry); -+ -+ /* don't modify queue heads during completion callback */ -+ ep->stopped = 1; -+ /* spin_unlock/spin_lock now done in fops->complete() */ -+ ep->pcd->fops->complete(ep->pcd, ep->priv, req->priv, status, -+ req->actual); -+ -+ if (ep->pcd->request_pending > 0) { -+ --ep->pcd->request_pending; -+ } -+ -+ ep->stopped = stopped; -+ DWC_FREE(req); -+} -+ -+/** -+ * This function terminates all the requsts in the EP request queue. -+ */ -+void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep) -+{ -+ dwc_otg_pcd_request_t *req; -+ -+ ep->stopped = 1; -+ -+ /* called with irqs blocked?? */ -+ while (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ dwc_otg_request_done(ep, req, -DWC_E_SHUTDOWN); -+ } -+} -+ -+void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd, -+ const struct dwc_otg_pcd_function_ops *fops) -+{ -+ pcd->fops = fops; -+} -+ -+/** -+ * PCD Callback function for initializing the PCD when switching to -+ * device mode. -+ * -+ * @param p void pointer to the dwc_otg_pcd_t -+ */ -+static int32_t dwc_otg_pcd_start_cb(void *p) -+{ -+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ -+ /* -+ * Initialized the Core for Device mode. -+ */ -+ if (dwc_otg_is_device_mode(core_if)) { -+ dwc_otg_core_dev_init(core_if); -+ /* Set core_if's lock pointer to the pcd->lock */ -+ core_if->lock = pcd->lock; -+ } -+ return 1; -+} -+ -+/** CFI-specific buffer allocation function for EP */ -+#ifdef DWC_UTE_CFI -+uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr, -+ size_t buflen, int flags) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ ep = get_ep_from_handle(pcd, pep); -+ if (!ep) { -+ DWC_WARN("bad ep\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ return pcd->cfi->ops.ep_alloc_buf(pcd->cfi, pcd, ep, addr, buflen, -+ flags); -+} -+#else -+uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr, -+ size_t buflen, int flags); -+#endif -+ -+/** -+ * PCD Callback function for notifying the PCD when resuming from -+ * suspend. -+ * -+ * @param p void pointer to the dwc_otg_pcd_t -+ */ -+static int32_t dwc_otg_pcd_resume_cb(void *p) -+{ -+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; -+ -+ if (pcd->fops->resume) { -+ pcd->fops->resume(pcd); -+ } -+ -+ /* Stop the SRP timeout timer. */ -+ if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS) -+ || (!GET_CORE_IF(pcd)->core_params->i2c_enable)) { -+ if (GET_CORE_IF(pcd)->srp_timer_started) { -+ GET_CORE_IF(pcd)->srp_timer_started = 0; -+ DWC_TIMER_CANCEL(GET_CORE_IF(pcd)->srp_timer); -+ } -+ } -+ return 1; -+} -+ -+/** -+ * PCD Callback function for notifying the PCD device is suspended. -+ * -+ * @param p void pointer to the dwc_otg_pcd_t -+ */ -+static int32_t dwc_otg_pcd_suspend_cb(void *p) -+{ -+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; -+ -+ if (pcd->fops->suspend) { -+ DWC_SPINUNLOCK(pcd->lock); -+ pcd->fops->suspend(pcd); -+ DWC_SPINLOCK(pcd->lock); -+ } -+ -+ return 1; -+} -+ -+/** -+ * PCD Callback function for stopping the PCD when switching to Host -+ * mode. -+ * -+ * @param p void pointer to the dwc_otg_pcd_t -+ */ -+static int32_t dwc_otg_pcd_stop_cb(void *p) -+{ -+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; -+ extern void dwc_otg_pcd_stop(dwc_otg_pcd_t * _pcd); -+ -+ dwc_otg_pcd_stop(pcd); -+ return 1; -+} -+ -+/** -+ * PCD Callback structure for handling mode switching. -+ */ -+static dwc_otg_cil_callbacks_t pcd_callbacks = { -+ .start = dwc_otg_pcd_start_cb, -+ .stop = dwc_otg_pcd_stop_cb, -+ .suspend = dwc_otg_pcd_suspend_cb, -+ .resume_wakeup = dwc_otg_pcd_resume_cb, -+ .p = 0, /* Set at registration */ -+}; -+ -+/** -+ * This function allocates a DMA Descriptor chain for the Endpoint -+ * buffer to be used for a transfer to/from the specified endpoint. -+ */ -+dwc_otg_dev_dma_desc_t *dwc_otg_ep_alloc_desc_chain(struct device *dev, -+ dwc_dma_t * dma_desc_addr, -+ uint32_t count) -+{ -+ return DWC_DMA_ALLOC_ATOMIC(dev, count * sizeof(dwc_otg_dev_dma_desc_t), -+ dma_desc_addr); -+} -+ -+/** -+ * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc. -+ */ -+void dwc_otg_ep_free_desc_chain(struct device *dev, -+ dwc_otg_dev_dma_desc_t * desc_addr, -+ uint32_t dma_desc_addr, uint32_t count) -+{ -+ DWC_DMA_FREE(dev, count * sizeof(dwc_otg_dev_dma_desc_t), desc_addr, -+ dma_desc_addr); -+} -+ -+#ifdef DWC_EN_ISOC -+ -+/** -+ * This function initializes a descriptor chain for Isochronous transfer -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param dwc_ep The EP to start the transfer on. -+ * -+ */ -+void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * dwc_ep) -+{ -+ -+ dsts_data_t dsts = {.d32 = 0 }; -+ depctl_data_t depctl = {.d32 = 0 }; -+ volatile uint32_t *addr; -+ int i, j; -+ uint32_t len; -+ -+ if (dwc_ep->is_in) -+ dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval; -+ else -+ dwc_ep->desc_cnt = -+ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / -+ dwc_ep->bInterval; -+ -+ /** Allocate descriptors for double buffering */ -+ dwc_ep->iso_desc_addr = -+ dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr, -+ dwc_ep->desc_cnt * 2); -+ if (dwc_ep->desc_addr) { -+ DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__); -+ return; -+ } -+ -+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ -+ /** ISO OUT EP */ -+ if (dwc_ep->is_in == 0) { -+ dev_dma_desc_sts_t sts = {.d32 = 0 }; -+ dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr; -+ dma_addr_t dma_ad; -+ uint32_t data_per_desc; -+ dwc_otg_dev_out_ep_regs_t *out_regs = -+ core_if->dev_if->out_ep_regs[dwc_ep->num]; -+ int offset; -+ -+ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl; -+ dma_ad = (dma_addr_t) DWC_READ_REG32(&(out_regs->doepdma)); -+ -+ /** Buffer 0 descriptors setup */ -+ dma_ad = dwc_ep->dma_addr0; -+ -+ sts.b_iso_out.bs = BS_HOST_READY; -+ sts.b_iso_out.rxsts = 0; -+ sts.b_iso_out.l = 0; -+ sts.b_iso_out.sp = 0; -+ sts.b_iso_out.ioc = 0; -+ sts.b_iso_out.pid = 0; -+ sts.b_iso_out.framenum = 0; -+ -+ offset = 0; -+ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; -+ i += dwc_ep->pkt_per_frm) { -+ -+ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { -+ uint32_t len = (j + 1) * dwc_ep->maxpacket; -+ if (len > dwc_ep->data_per_frame) -+ data_per_desc = -+ dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket; -+ else -+ data_per_desc = dwc_ep->maxpacket; -+ len = data_per_desc % 4; -+ if (len) -+ data_per_desc += 4 - len; -+ -+ sts.b_iso_out.rxbytes = data_per_desc; -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ offset += data_per_desc; -+ dma_desc++; -+ dma_ad += data_per_desc; -+ } -+ } -+ -+ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { -+ uint32_t len = (j + 1) * dwc_ep->maxpacket; -+ if (len > dwc_ep->data_per_frame) -+ data_per_desc = -+ dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket; -+ else -+ data_per_desc = dwc_ep->maxpacket; -+ len = data_per_desc % 4; -+ if (len) -+ data_per_desc += 4 - len; -+ sts.b_iso_out.rxbytes = data_per_desc; -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ offset += data_per_desc; -+ dma_desc++; -+ dma_ad += data_per_desc; -+ } -+ -+ sts.b_iso_out.ioc = 1; -+ len = (j + 1) * dwc_ep->maxpacket; -+ if (len > dwc_ep->data_per_frame) -+ data_per_desc = -+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket; -+ else -+ data_per_desc = dwc_ep->maxpacket; -+ len = data_per_desc % 4; -+ if (len) -+ data_per_desc += 4 - len; -+ sts.b_iso_out.rxbytes = data_per_desc; -+ -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ dma_desc++; -+ -+ /** Buffer 1 descriptors setup */ -+ sts.b_iso_out.ioc = 0; -+ dma_ad = dwc_ep->dma_addr1; -+ -+ offset = 0; -+ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; -+ i += dwc_ep->pkt_per_frm) { -+ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { -+ uint32_t len = (j + 1) * dwc_ep->maxpacket; -+ if (len > dwc_ep->data_per_frame) -+ data_per_desc = -+ dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket; -+ else -+ data_per_desc = dwc_ep->maxpacket; -+ len = data_per_desc % 4; -+ if (len) -+ data_per_desc += 4 - len; -+ -+ data_per_desc = -+ sts.b_iso_out.rxbytes = data_per_desc; -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ offset += data_per_desc; -+ dma_desc++; -+ dma_ad += data_per_desc; -+ } -+ } -+ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { -+ data_per_desc = -+ ((j + 1) * dwc_ep->maxpacket > -+ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket : dwc_ep->maxpacket; -+ data_per_desc += -+ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; -+ sts.b_iso_out.rxbytes = data_per_desc; -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ offset += data_per_desc; -+ dma_desc++; -+ dma_ad += data_per_desc; -+ } -+ -+ sts.b_iso_out.ioc = 1; -+ sts.b_iso_out.l = 1; -+ data_per_desc = -+ ((j + 1) * dwc_ep->maxpacket > -+ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket : dwc_ep->maxpacket; -+ data_per_desc += -+ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; -+ sts.b_iso_out.rxbytes = data_per_desc; -+ -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ dwc_ep->next_frame = 0; -+ -+ /** Write dma_ad into DOEPDMA register */ -+ DWC_WRITE_REG32(&(out_regs->doepdma), -+ (uint32_t) dwc_ep->iso_dma_desc_addr); -+ -+ } -+ /** ISO IN EP */ -+ else { -+ dev_dma_desc_sts_t sts = {.d32 = 0 }; -+ dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr; -+ dma_addr_t dma_ad; -+ dwc_otg_dev_in_ep_regs_t *in_regs = -+ core_if->dev_if->in_ep_regs[dwc_ep->num]; -+ unsigned int frmnumber; -+ fifosize_data_t txfifosize, rxfifosize; -+ -+ txfifosize.d32 = -+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[dwc_ep->num]-> -+ dtxfsts); -+ rxfifosize.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); -+ -+ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl; -+ -+ dma_ad = dwc_ep->dma_addr0; -+ -+ dsts.d32 = -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ -+ sts.b_iso_in.bs = BS_HOST_READY; -+ sts.b_iso_in.txsts = 0; -+ sts.b_iso_in.sp = -+ (dwc_ep->data_per_frame % dwc_ep->maxpacket) ? 1 : 0; -+ sts.b_iso_in.ioc = 0; -+ sts.b_iso_in.pid = dwc_ep->pkt_per_frm; -+ -+ frmnumber = dwc_ep->next_frame; -+ -+ sts.b_iso_in.framenum = frmnumber; -+ sts.b_iso_in.txbytes = dwc_ep->data_per_frame; -+ sts.b_iso_in.l = 0; -+ -+ /** Buffer 0 descriptors setup */ -+ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ dma_desc++; -+ -+ dma_ad += dwc_ep->data_per_frame; -+ sts.b_iso_in.framenum += dwc_ep->bInterval; -+ } -+ -+ sts.b_iso_in.ioc = 1; -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ ++dma_desc; -+ -+ /** Buffer 1 descriptors setup */ -+ sts.b_iso_in.ioc = 0; -+ dma_ad = dwc_ep->dma_addr1; -+ -+ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; -+ i += dwc_ep->pkt_per_frm) { -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ dma_desc++; -+ -+ dma_ad += dwc_ep->data_per_frame; -+ sts.b_iso_in.framenum += dwc_ep->bInterval; -+ -+ sts.b_iso_in.ioc = 0; -+ } -+ sts.b_iso_in.ioc = 1; -+ sts.b_iso_in.l = 1; -+ -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval; -+ -+ /** Write dma_ad into diepdma register */ -+ DWC_WRITE_REG32(&(in_regs->diepdma), -+ (uint32_t) dwc_ep->iso_dma_desc_addr); -+ } -+ /** Enable endpoint, clear nak */ -+ depctl.d32 = 0; -+ depctl.b.epena = 1; -+ depctl.b.usbactep = 1; -+ depctl.b.cnak = 1; -+ -+ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32); -+ depctl.d32 = DWC_READ_REG32(addr); -+} -+ -+/** -+ * This function initializes a descriptor chain for Isochronous transfer -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ * -+ */ -+void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * ep) -+{ -+ depctl_data_t depctl = {.d32 = 0 }; -+ volatile uint32_t *addr; -+ -+ if (ep->is_in) { -+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; -+ } else { -+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; -+ } -+ -+ if (core_if->dma_enable == 0 || core_if->dma_desc_enable != 0) { -+ return; -+ } else { -+ deptsiz_data_t deptsiz = {.d32 = 0 }; -+ -+ ep->xfer_len = -+ ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval; -+ ep->pkt_cnt = -+ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; -+ ep->xfer_count = 0; -+ ep->xfer_buff = -+ (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; -+ ep->dma_addr = -+ (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; -+ -+ if (ep->is_in) { -+ /* Program the transfer size and packet count -+ * as follows: xfersize = N * maxpacket + -+ * short_packet pktcnt = N + (short_packet -+ * exist ? 1 : 0) -+ */ -+ deptsiz.b.mc = ep->pkt_per_frm; -+ deptsiz.b.xfersize = ep->xfer_len; -+ deptsiz.b.pktcnt = -+ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> -+ dieptsiz, deptsiz.d32); -+ -+ /* Write the DMA register */ -+ DWC_WRITE_REG32(& -+ (core_if->dev_if->in_ep_regs[ep->num]-> -+ diepdma), (uint32_t) ep->dma_addr); -+ -+ } else { -+ deptsiz.b.pktcnt = -+ (ep->xfer_len + (ep->maxpacket - 1)) / -+ ep->maxpacket; -+ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; -+ -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]-> -+ doeptsiz, deptsiz.d32); -+ -+ /* Write the DMA register */ -+ DWC_WRITE_REG32(& -+ (core_if->dev_if->out_ep_regs[ep->num]-> -+ doepdma), (uint32_t) ep->dma_addr); -+ -+ } -+ /** Enable endpoint, clear nak */ -+ depctl.d32 = 0; -+ depctl.b.epena = 1; -+ depctl.b.cnak = 1; -+ -+ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32); -+ } -+} -+ -+/** -+ * This function does the setup for a data transfer for an EP and -+ * starts the transfer. For an IN transfer, the packets will be -+ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, -+ * the packets are unloaded from the Rx FIFO in the ISR. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ */ -+ -+static void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * ep) -+{ -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable) { -+ if (ep->is_in) { -+ ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm; -+ } else { -+ ep->desc_cnt = ep->pkt_cnt; -+ } -+ dwc_otg_iso_ep_start_ddma_transfer(core_if, ep); -+ } else { -+ if (core_if->pti_enh_enable) { -+ dwc_otg_iso_ep_start_buf_transfer(core_if, ep); -+ } else { -+ ep->cur_pkt_addr = -+ (ep->proc_buf_num) ? ep->xfer_buff1 : ep-> -+ xfer_buff0; -+ ep->cur_pkt_dma_addr = -+ (ep->proc_buf_num) ? ep->dma_addr1 : ep-> -+ dma_addr0; -+ dwc_otg_iso_ep_start_frm_transfer(core_if, ep); -+ } -+ } -+ } else { -+ ep->cur_pkt_addr = -+ (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; -+ ep->cur_pkt_dma_addr = -+ (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; -+ dwc_otg_iso_ep_start_frm_transfer(core_if, ep); -+ } -+} -+ -+/** -+ * This function stops transfer for an EP and -+ * resets the ep's variables. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ */ -+ -+void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ depctl_data_t depctl = {.d32 = 0 }; -+ volatile uint32_t *addr; -+ -+ if (ep->is_in == 1) { -+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; -+ } else { -+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; -+ } -+ -+ /* disable the ep */ -+ depctl.d32 = DWC_READ_REG32(addr); -+ -+ depctl.b.epdis = 1; -+ depctl.b.snak = 1; -+ -+ DWC_WRITE_REG32(addr, depctl.d32); -+ -+ if (core_if->dma_desc_enable && -+ ep->iso_desc_addr && ep->iso_dma_desc_addr) { -+ dwc_otg_ep_free_desc_chain(ep->iso_desc_addr, -+ ep->iso_dma_desc_addr, -+ ep->desc_cnt * 2); -+ } -+ -+ /* reset varibales */ -+ ep->dma_addr0 = 0; -+ ep->dma_addr1 = 0; -+ ep->xfer_buff0 = 0; -+ ep->xfer_buff1 = 0; -+ ep->data_per_frame = 0; -+ ep->data_pattern_frame = 0; -+ ep->sync_frame = 0; -+ ep->buf_proc_intrvl = 0; -+ ep->bInterval = 0; -+ ep->proc_buf_num = 0; -+ ep->pkt_per_frm = 0; -+ ep->pkt_per_frm = 0; -+ ep->desc_cnt = 0; -+ ep->iso_desc_addr = 0; -+ ep->iso_dma_desc_addr = 0; -+} -+ -+int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle, -+ uint8_t * buf0, uint8_t * buf1, dwc_dma_t dma0, -+ dwc_dma_t dma1, int sync_frame, int dp_frame, -+ int data_per_frame, int start_frame, -+ int buf_proc_intrvl, void *req_handle, -+ int atomic_alloc) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ dwc_irqflags_t flags = 0; -+ dwc_ep_t *dwc_ep; -+ int32_t frm_data; -+ dsts_data_t dsts; -+ dwc_otg_core_if_t *core_if; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ -+ if (!ep || !ep->desc || ep->dwc_ep.num == 0) { -+ DWC_WARN("bad ep\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ core_if = GET_CORE_IF(pcd); -+ dwc_ep = &ep->dwc_ep; -+ -+ if (ep->iso_req_handle) { -+ DWC_WARN("ISO request in progress\n"); -+ } -+ -+ dwc_ep->dma_addr0 = dma0; -+ dwc_ep->dma_addr1 = dma1; -+ -+ dwc_ep->xfer_buff0 = buf0; -+ dwc_ep->xfer_buff1 = buf1; -+ -+ dwc_ep->data_per_frame = data_per_frame; -+ -+ /** @todo - pattern data support is to be implemented in the future */ -+ dwc_ep->data_pattern_frame = dp_frame; -+ dwc_ep->sync_frame = sync_frame; -+ -+ dwc_ep->buf_proc_intrvl = buf_proc_intrvl; -+ -+ dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1); -+ -+ dwc_ep->proc_buf_num = 0; -+ -+ dwc_ep->pkt_per_frm = 0; -+ frm_data = ep->dwc_ep.data_per_frame; -+ while (frm_data > 0) { -+ dwc_ep->pkt_per_frm++; -+ frm_data -= ep->dwc_ep.maxpacket; -+ } -+ -+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ -+ if (start_frame == -1) { -+ dwc_ep->next_frame = dsts.b.soffn + 1; -+ if (dwc_ep->bInterval != 1) { -+ dwc_ep->next_frame = -+ dwc_ep->next_frame + (dwc_ep->bInterval - 1 - -+ dwc_ep->next_frame % -+ dwc_ep->bInterval); -+ } -+ } else { -+ dwc_ep->next_frame = start_frame; -+ } -+ -+ if (!core_if->pti_enh_enable) { -+ dwc_ep->pkt_cnt = -+ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / -+ dwc_ep->bInterval; -+ } else { -+ dwc_ep->pkt_cnt = -+ (dwc_ep->data_per_frame * -+ (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval) -+ - 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket; -+ } -+ -+ if (core_if->dma_desc_enable) { -+ dwc_ep->desc_cnt = -+ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / -+ dwc_ep->bInterval; -+ } -+ -+ if (atomic_alloc) { -+ dwc_ep->pkt_info = -+ DWC_ALLOC_ATOMIC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); -+ } else { -+ dwc_ep->pkt_info = -+ DWC_ALLOC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); -+ } -+ if (!dwc_ep->pkt_info) { -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ return -DWC_E_NO_MEMORY; -+ } -+ if (core_if->pti_enh_enable) { -+ dwc_memset(dwc_ep->pkt_info, 0, -+ sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); -+ } -+ -+ dwc_ep->cur_pkt = 0; -+ ep->iso_req_handle = req_handle; -+ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ dwc_otg_iso_ep_start_transfer(core_if, dwc_ep); -+ return 0; -+} -+ -+int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle) -+{ -+ dwc_irqflags_t flags = 0; -+ dwc_otg_pcd_ep_t *ep; -+ dwc_ep_t *dwc_ep; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ if (!ep || !ep->desc || ep->dwc_ep.num == 0) { -+ DWC_WARN("bad ep\n"); -+ return -DWC_E_INVALID; -+ } -+ dwc_ep = &ep->dwc_ep; -+ -+ dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep); -+ -+ DWC_FREE(dwc_ep->pkt_info); -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ if (ep->iso_req_handle != req_handle) { -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ return -DWC_E_INVALID; -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ -+ ep->iso_req_handle = 0; -+ return 0; -+} -+ -+/** -+ * This function is used for perodical data exchnage between PCD and gadget drivers. -+ * for Isochronous EPs -+ * -+ * - Every time a sync period completes this function is called to -+ * perform data exchange between PCD and gadget -+ */ -+void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep, -+ void *req_handle) -+{ -+ int i; -+ dwc_ep_t *dwc_ep; -+ -+ dwc_ep = &ep->dwc_ep; -+ -+ DWC_SPINUNLOCK(ep->pcd->lock); -+ pcd->fops->isoc_complete(pcd, ep->priv, ep->iso_req_handle, -+ dwc_ep->proc_buf_num ^ 0x1); -+ DWC_SPINLOCK(ep->pcd->lock); -+ -+ for (i = 0; i < dwc_ep->pkt_cnt; ++i) { -+ dwc_ep->pkt_info[i].status = 0; -+ dwc_ep->pkt_info[i].offset = 0; -+ dwc_ep->pkt_info[i].length = 0; -+ } -+} -+ -+int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *iso_req_handle) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ dwc_ep_t *dwc_ep; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ if (!ep->desc || ep->dwc_ep.num == 0) { -+ DWC_WARN("bad ep\n"); -+ return -DWC_E_INVALID; -+ } -+ dwc_ep = &ep->dwc_ep; -+ -+ return dwc_ep->pkt_cnt; -+} -+ -+void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *iso_req_handle, int packet, -+ int *status, int *actual, int *offset) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ dwc_ep_t *dwc_ep; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ if (!ep) -+ DWC_WARN("bad ep\n"); -+ -+ dwc_ep = &ep->dwc_ep; -+ -+ *status = dwc_ep->pkt_info[packet].status; -+ *actual = dwc_ep->pkt_info[packet].length; -+ *offset = dwc_ep->pkt_info[packet].offset; -+} -+ -+#endif /* DWC_EN_ISOC */ -+ -+static void dwc_otg_pcd_init_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * pcd_ep, -+ uint32_t is_in, uint32_t ep_num) -+{ -+ /* Init EP structure */ -+ pcd_ep->desc = 0; -+ pcd_ep->pcd = pcd; -+ pcd_ep->stopped = 1; -+ pcd_ep->queue_sof = 0; -+ -+ /* Init DWC ep structure */ -+ pcd_ep->dwc_ep.is_in = is_in; -+ pcd_ep->dwc_ep.num = ep_num; -+ pcd_ep->dwc_ep.active = 0; -+ pcd_ep->dwc_ep.tx_fifo_num = 0; -+ /* Control until ep is actvated */ -+ pcd_ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; -+ pcd_ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; -+ pcd_ep->dwc_ep.dma_addr = 0; -+ pcd_ep->dwc_ep.start_xfer_buff = 0; -+ pcd_ep->dwc_ep.xfer_buff = 0; -+ pcd_ep->dwc_ep.xfer_len = 0; -+ pcd_ep->dwc_ep.xfer_count = 0; -+ pcd_ep->dwc_ep.sent_zlp = 0; -+ pcd_ep->dwc_ep.total_len = 0; -+ pcd_ep->dwc_ep.desc_addr = 0; -+ pcd_ep->dwc_ep.dma_desc_addr = 0; -+ DWC_CIRCLEQ_INIT(&pcd_ep->queue); -+} -+ -+/** -+ * Initialize ep's -+ */ -+static void dwc_otg_pcd_reinit(dwc_otg_pcd_t * pcd) -+{ -+ int i; -+ uint32_t hwcfg1; -+ dwc_otg_pcd_ep_t *ep; -+ int in_ep_cntr, out_ep_cntr; -+ uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps; -+ uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps; -+ -+ /** -+ * Initialize the EP0 structure. -+ */ -+ ep = &pcd->ep0; -+ dwc_otg_pcd_init_ep(pcd, ep, 0, 0); -+ -+ in_ep_cntr = 0; -+ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3; -+ for (i = 1; in_ep_cntr < num_in_eps; i++) { -+ if ((hwcfg1 & 0x1) == 0) { -+ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr]; -+ in_ep_cntr++; -+ /** -+ * @todo NGS: Add direction to EP, based on contents -+ * of HWCFG1. Need a copy of HWCFG1 in pcd structure? -+ * sprintf(";r -+ */ -+ dwc_otg_pcd_init_ep(pcd, ep, 1 /* IN */ , i); -+ -+ DWC_CIRCLEQ_INIT(&ep->queue); -+ } -+ hwcfg1 >>= 2; -+ } -+ -+ out_ep_cntr = 0; -+ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2; -+ for (i = 1; out_ep_cntr < num_out_eps; i++) { -+ if ((hwcfg1 & 0x1) == 0) { -+ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr]; -+ out_ep_cntr++; -+ /** -+ * @todo NGS: Add direction to EP, based on contents -+ * of HWCFG1. Need a copy of HWCFG1 in pcd structure? -+ * sprintf(";r -+ */ -+ dwc_otg_pcd_init_ep(pcd, ep, 0 /* OUT */ , i); -+ DWC_CIRCLEQ_INIT(&ep->queue); -+ } -+ hwcfg1 >>= 2; -+ } -+ -+ pcd->ep0state = EP0_DISCONNECT; -+ pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE; -+ pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; -+} -+ -+/** -+ * This function is called when the SRP timer expires. The SRP should -+ * complete within 6 seconds. -+ */ -+static void srp_timeout(void *ptr) -+{ -+ gotgctl_data_t gotgctl; -+ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; -+ volatile uint32_t *addr = &core_if->core_global_regs->gotgctl; -+ -+ gotgctl.d32 = DWC_READ_REG32(addr); -+ -+ core_if->srp_timer_started = 0; -+ -+ if (core_if->adp_enable) { -+ if (gotgctl.b.bsesvld == 0) { -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ DWC_PRINTF("SRP Timeout BSESSVLD = 0\n"); -+ /* Power off the core */ -+ if (core_if->power_down == 2) { -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs->gpwrdn, -+ gpwrdn.d32, 0); -+ } -+ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, -+ gpwrdn.d32); -+ dwc_otg_adp_probe_start(core_if); -+ } else { -+ DWC_PRINTF("SRP Timeout BSESSVLD = 1\n"); -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ } -+ } -+ -+ if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) && -+ (core_if->core_params->i2c_enable)) { -+ DWC_PRINTF("SRP Timeout\n"); -+ -+ if ((core_if->srp_success) && (gotgctl.b.bsesvld)) { -+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { -+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); -+ } -+ -+ /* Clear Session Request */ -+ gotgctl.d32 = 0; -+ gotgctl.b.sesreq = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl, -+ gotgctl.d32, 0); -+ -+ core_if->srp_success = 0; -+ } else { -+ __DWC_ERROR("Device not connected/responding\n"); -+ gotgctl.b.sesreq = 0; -+ DWC_WRITE_REG32(addr, gotgctl.d32); -+ } -+ } else if (gotgctl.b.sesreq) { -+ DWC_PRINTF("SRP Timeout\n"); -+ -+ __DWC_ERROR("Device not connected/responding\n"); -+ gotgctl.b.sesreq = 0; -+ DWC_WRITE_REG32(addr, gotgctl.d32); -+ } else { -+ DWC_PRINTF(" SRP GOTGCTL=%0x\n", gotgctl.d32); -+ } -+} -+ -+/** -+ * Tasklet -+ * -+ */ -+extern void start_next_request(dwc_otg_pcd_ep_t * ep); -+ -+static void start_xfer_tasklet_func(void *data) -+{ -+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ -+ int i; -+ depctl_data_t diepctl; -+ -+ DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n"); -+ -+ diepctl.d32 = DWC_READ_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl); -+ -+ if (pcd->ep0.queue_sof) { -+ pcd->ep0.queue_sof = 0; -+ start_next_request(&pcd->ep0); -+ // break; -+ } -+ -+ for (i = 0; i < core_if->dev_if->num_in_eps; i++) { -+ depctl_data_t diepctl; -+ diepctl.d32 = -+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl); -+ -+ if (pcd->in_ep[i].queue_sof) { -+ pcd->in_ep[i].queue_sof = 0; -+ start_next_request(&pcd->in_ep[i]); -+ // break; -+ } -+ } -+ -+ return; -+} -+ -+/** -+ * This function initialized the PCD portion of the driver. -+ * -+ */ -+dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_device_t *otg_dev) -+{ -+ struct device *dev = &otg_dev->os_dep.platformdev->dev; -+ dwc_otg_core_if_t *core_if = otg_dev->core_if; -+ dwc_otg_pcd_t *pcd = NULL; -+ dwc_otg_dev_if_t *dev_if; -+ int i; -+ -+ /* -+ * Allocate PCD structure -+ */ -+ pcd = DWC_ALLOC(sizeof(dwc_otg_pcd_t)); -+ -+ if (pcd == NULL) { -+ return NULL; -+ } -+ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK)) -+ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(pcd->lock); -+#else -+ pcd->lock = DWC_SPINLOCK_ALLOC(); -+#endif -+ DWC_DEBUGPL(DBG_HCDV, "Init of PCD %p given core_if %p\n", -+ pcd, core_if);//GRAYG -+ if (!pcd->lock) { -+ DWC_ERROR("Could not allocate lock for pcd"); -+ DWC_FREE(pcd); -+ return NULL; -+ } -+ /* Set core_if's lock pointer to hcd->lock */ -+ core_if->lock = pcd->lock; -+ pcd->core_if = core_if; -+ -+ dev_if = core_if->dev_if; -+ dev_if->isoc_ep = NULL; -+ -+ if (core_if->hwcfg4.b.ded_fifo_en) { -+ DWC_PRINTF("Dedicated Tx FIFOs mode\n"); -+ } else { -+ DWC_PRINTF("Shared Tx FIFO mode\n"); -+ } -+ -+ /* -+ * Initialized the Core for Device mode here if there is nod ADP support. -+ * Otherwise it will be done later in dwc_otg_adp_start routine. -+ */ -+ if (dwc_otg_is_device_mode(core_if) /*&& !core_if->adp_enable*/) { -+ dwc_otg_core_dev_init(core_if); -+ } -+ -+ /* -+ * Register the PCD Callbacks. -+ */ -+ dwc_otg_cil_register_pcd_callbacks(core_if, &pcd_callbacks, pcd); -+ -+ /* -+ * Initialize the DMA buffer for SETUP packets -+ */ -+ if (GET_CORE_IF(pcd)->dma_enable) { -+ pcd->setup_pkt = -+ DWC_DMA_ALLOC(dev, sizeof(*pcd->setup_pkt) * 5, -+ &pcd->setup_pkt_dma_handle); -+ if (pcd->setup_pkt == NULL) { -+ DWC_FREE(pcd); -+ return NULL; -+ } -+ -+ pcd->status_buf = -+ DWC_DMA_ALLOC(dev, sizeof(uint16_t), -+ &pcd->status_buf_dma_handle); -+ if (pcd->status_buf == NULL) { -+ DWC_DMA_FREE(dev, sizeof(*pcd->setup_pkt) * 5, -+ pcd->setup_pkt, pcd->setup_pkt_dma_handle); -+ DWC_FREE(pcd); -+ return NULL; -+ } -+ -+ if (GET_CORE_IF(pcd)->dma_desc_enable) { -+ dev_if->setup_desc_addr[0] = -+ dwc_otg_ep_alloc_desc_chain(dev, -+ &dev_if->dma_setup_desc_addr[0], 1); -+ dev_if->setup_desc_addr[1] = -+ dwc_otg_ep_alloc_desc_chain(dev, -+ &dev_if->dma_setup_desc_addr[1], 1); -+ dev_if->in_desc_addr = -+ dwc_otg_ep_alloc_desc_chain(dev, -+ &dev_if->dma_in_desc_addr, 1); -+ dev_if->out_desc_addr = -+ dwc_otg_ep_alloc_desc_chain(dev, -+ &dev_if->dma_out_desc_addr, 1); -+ pcd->data_terminated = 0; -+ -+ if (dev_if->setup_desc_addr[0] == 0 -+ || dev_if->setup_desc_addr[1] == 0 -+ || dev_if->in_desc_addr == 0 -+ || dev_if->out_desc_addr == 0) { -+ -+ if (dev_if->out_desc_addr) -+ dwc_otg_ep_free_desc_chain(dev, -+ dev_if->out_desc_addr, -+ dev_if->dma_out_desc_addr, 1); -+ if (dev_if->in_desc_addr) -+ dwc_otg_ep_free_desc_chain(dev, -+ dev_if->in_desc_addr, -+ dev_if->dma_in_desc_addr, 1); -+ if (dev_if->setup_desc_addr[1]) -+ dwc_otg_ep_free_desc_chain(dev, -+ dev_if->setup_desc_addr[1], -+ dev_if->dma_setup_desc_addr[1], 1); -+ if (dev_if->setup_desc_addr[0]) -+ dwc_otg_ep_free_desc_chain(dev, -+ dev_if->setup_desc_addr[0], -+ dev_if->dma_setup_desc_addr[0], 1); -+ -+ DWC_DMA_FREE(dev, sizeof(*pcd->setup_pkt) * 5, -+ pcd->setup_pkt, -+ pcd->setup_pkt_dma_handle); -+ DWC_DMA_FREE(dev, sizeof(*pcd->status_buf), -+ pcd->status_buf, -+ pcd->status_buf_dma_handle); -+ -+ DWC_FREE(pcd); -+ -+ return NULL; -+ } -+ } -+ } else { -+ pcd->setup_pkt = DWC_ALLOC(sizeof(*pcd->setup_pkt) * 5); -+ if (pcd->setup_pkt == NULL) { -+ DWC_FREE(pcd); -+ return NULL; -+ } -+ -+ pcd->status_buf = DWC_ALLOC(sizeof(uint16_t)); -+ if (pcd->status_buf == NULL) { -+ DWC_FREE(pcd->setup_pkt); -+ DWC_FREE(pcd); -+ return NULL; -+ } -+ } -+ -+ dwc_otg_pcd_reinit(pcd); -+ -+ /* Allocate the cfi object for the PCD */ -+#ifdef DWC_UTE_CFI -+ pcd->cfi = DWC_ALLOC(sizeof(cfiobject_t)); -+ if (NULL == pcd->cfi) -+ goto fail; -+ if (init_cfi(pcd->cfi)) { -+ CFI_INFO("%s: Failed to init the CFI object\n", __func__); -+ goto fail; -+ } -+#endif -+ -+ /* Initialize tasklets */ -+ pcd->start_xfer_tasklet = DWC_TASK_ALLOC("xfer_tasklet", -+ start_xfer_tasklet_func, pcd); -+ pcd->test_mode_tasklet = DWC_TASK_ALLOC("test_mode_tasklet", -+ do_test_mode, pcd); -+ -+ /* Initialize SRP timer */ -+ core_if->srp_timer = DWC_TIMER_ALLOC("SRP TIMER", srp_timeout, core_if); -+ -+ if (core_if->core_params->dev_out_nak) { -+ /** -+ * Initialize xfer timeout timer. Implemented for -+ * 2.93a feature "Device DDMA OUT NAK Enhancement" -+ */ -+ for(i = 0; i < MAX_EPS_CHANNELS; i++) { -+ pcd->core_if->ep_xfer_timer[i] = -+ DWC_TIMER_ALLOC("ep timer", ep_xfer_timeout, -+ &pcd->core_if->ep_xfer_info[i]); -+ } -+ } -+ -+ return pcd; -+#ifdef DWC_UTE_CFI -+fail: -+#endif -+ if (pcd->setup_pkt) -+ DWC_FREE(pcd->setup_pkt); -+ if (pcd->status_buf) -+ DWC_FREE(pcd->status_buf); -+#ifdef DWC_UTE_CFI -+ if (pcd->cfi) -+ DWC_FREE(pcd->cfi); -+#endif -+ if (pcd) -+ DWC_FREE(pcd); -+ return NULL; -+ -+} -+ -+/** -+ * Remove PCD specific data -+ */ -+void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; -+ struct device *dev = dwc_otg_pcd_to_dev(pcd); -+ int i; -+ -+ if (pcd->core_if->core_params->dev_out_nak) { -+ for (i = 0; i < MAX_EPS_CHANNELS; i++) { -+ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[i]); -+ pcd->core_if->ep_xfer_info[i].state = 0; -+ } -+ } -+ -+ if (GET_CORE_IF(pcd)->dma_enable) { -+ DWC_DMA_FREE(dev, sizeof(*pcd->setup_pkt) * 5, pcd->setup_pkt, -+ pcd->setup_pkt_dma_handle); -+ DWC_DMA_FREE(dev, sizeof(uint16_t), pcd->status_buf, -+ pcd->status_buf_dma_handle); -+ if (GET_CORE_IF(pcd)->dma_desc_enable) { -+ dwc_otg_ep_free_desc_chain(dev, -+ dev_if->setup_desc_addr[0], -+ dev_if->dma_setup_desc_addr -+ [0], 1); -+ dwc_otg_ep_free_desc_chain(dev, -+ dev_if->setup_desc_addr[1], -+ dev_if->dma_setup_desc_addr -+ [1], 1); -+ dwc_otg_ep_free_desc_chain(dev, -+ dev_if->in_desc_addr, -+ dev_if->dma_in_desc_addr, 1); -+ dwc_otg_ep_free_desc_chain(dev, -+ dev_if->out_desc_addr, -+ dev_if->dma_out_desc_addr, -+ 1); -+ } -+ } else { -+ DWC_FREE(pcd->setup_pkt); -+ DWC_FREE(pcd->status_buf); -+ } -+ DWC_SPINLOCK_FREE(pcd->lock); -+ /* Set core_if's lock pointer to NULL */ -+ pcd->core_if->lock = NULL; -+ -+ DWC_TASK_FREE(pcd->start_xfer_tasklet); -+ DWC_TASK_FREE(pcd->test_mode_tasklet); -+ if (pcd->core_if->core_params->dev_out_nak) { -+ for (i = 0; i < MAX_EPS_CHANNELS; i++) { -+ if (pcd->core_if->ep_xfer_timer[i]) { -+ DWC_TIMER_FREE(pcd->core_if->ep_xfer_timer[i]); -+ } -+ } -+ } -+ -+/* Release the CFI object's dynamic memory */ -+#ifdef DWC_UTE_CFI -+ if (pcd->cfi->ops.release) { -+ pcd->cfi->ops.release(pcd->cfi); -+ } -+#endif -+ -+ DWC_FREE(pcd); -+} -+ -+/** -+ * Returns whether registered pcd is dual speed or not -+ */ -+uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ -+ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) || -+ ((core_if->hwcfg2.b.hs_phy_type == 2) && -+ (core_if->hwcfg2.b.fs_phy_type == 1) && -+ (core_if->core_params->ulpi_fs_ls))) { -+ return 0; -+ } -+ -+ return 1; -+} -+ -+/** -+ * Returns whether registered pcd is OTG capable or not -+ */ -+uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ gusbcfg_data_t usbcfg = {.d32 = 0 }; -+ -+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ if (!usbcfg.b.srpcap || !usbcfg.b.hnpcap) { -+ return 0; -+ } -+ -+ return 1; -+} -+ -+/** -+ * This function assigns periodic Tx FIFO to an periodic EP -+ * in shared Tx FIFO mode -+ */ -+static uint32_t assign_tx_fifo(dwc_otg_core_if_t * core_if) -+{ -+ uint32_t TxMsk = 1; -+ int i; -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i) { -+ if ((TxMsk & core_if->tx_msk) == 0) { -+ core_if->tx_msk |= TxMsk; -+ return i + 1; -+ } -+ TxMsk <<= 1; -+ } -+ return 0; -+} -+ -+/** -+ * This function assigns periodic Tx FIFO to an periodic EP -+ * in shared Tx FIFO mode -+ */ -+static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t * core_if) -+{ -+ uint32_t PerTxMsk = 1; -+ int i; -+ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i) { -+ if ((PerTxMsk & core_if->p_tx_msk) == 0) { -+ core_if->p_tx_msk |= PerTxMsk; -+ return i + 1; -+ } -+ PerTxMsk <<= 1; -+ } -+ return 0; -+} -+ -+/** -+ * This function releases periodic Tx FIFO -+ * in shared Tx FIFO mode -+ */ -+static void release_perio_tx_fifo(dwc_otg_core_if_t * core_if, -+ uint32_t fifo_num) -+{ -+ core_if->p_tx_msk = -+ (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk; -+} -+ -+/** -+ * This function releases periodic Tx FIFO -+ * in shared Tx FIFO mode -+ */ -+static void release_tx_fifo(dwc_otg_core_if_t * core_if, uint32_t fifo_num) -+{ -+ core_if->tx_msk = -+ (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk; -+} -+ -+/** -+ * This function is being called from gadget -+ * to enable PCD endpoint. -+ */ -+int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd, -+ const uint8_t * ep_desc, void *usb_ep) -+{ -+ int num, dir; -+ dwc_otg_pcd_ep_t *ep = NULL; -+ const usb_endpoint_descriptor_t *desc; -+ dwc_irqflags_t flags; -+ fifosize_data_t dptxfsiz = {.d32 = 0 }; -+ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; -+ gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 }; -+ int retval = 0; -+ int i, epcount; -+ struct device *dev = dwc_otg_pcd_to_dev(pcd); -+ -+ desc = (const usb_endpoint_descriptor_t *)ep_desc; -+ -+ if (!desc) { -+ pcd->ep0.priv = usb_ep; -+ ep = &pcd->ep0; -+ retval = -DWC_E_INVALID; -+ goto out; -+ } -+ -+ num = UE_GET_ADDR(desc->bEndpointAddress); -+ dir = UE_GET_DIR(desc->bEndpointAddress); -+ -+ if (!desc->wMaxPacketSize) { -+ DWC_WARN("bad maxpacketsize\n"); -+ retval = -DWC_E_INVALID; -+ goto out; -+ } -+ -+ if (dir == UE_DIR_IN) { -+ epcount = pcd->core_if->dev_if->num_in_eps; -+ for (i = 0; i < epcount; i++) { -+ if (num == pcd->in_ep[i].dwc_ep.num) { -+ ep = &pcd->in_ep[i]; -+ break; -+ } -+ } -+ } else { -+ epcount = pcd->core_if->dev_if->num_out_eps; -+ for (i = 0; i < epcount; i++) { -+ if (num == pcd->out_ep[i].dwc_ep.num) { -+ ep = &pcd->out_ep[i]; -+ break; -+ } -+ } -+ } -+ -+ if (!ep) { -+ DWC_WARN("bad address\n"); -+ retval = -DWC_E_INVALID; -+ goto out; -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ -+ ep->desc = desc; -+ ep->priv = usb_ep; -+ -+ /* -+ * Activate the EP -+ */ -+ ep->stopped = 0; -+ -+ ep->dwc_ep.is_in = (dir == UE_DIR_IN); -+ ep->dwc_ep.maxpacket = UGETW(desc->wMaxPacketSize); -+ -+ ep->dwc_ep.type = desc->bmAttributes & UE_XFERTYPE; -+ -+ if (ep->dwc_ep.is_in) { -+ if (!GET_CORE_IF(pcd)->en_multiple_tx_fifo) { -+ ep->dwc_ep.tx_fifo_num = 0; -+ -+ if (ep->dwc_ep.type == UE_ISOCHRONOUS) { -+ /* -+ * if ISOC EP then assign a Periodic Tx FIFO. -+ */ -+ ep->dwc_ep.tx_fifo_num = -+ assign_perio_tx_fifo(GET_CORE_IF(pcd)); -+ } -+ } else { -+ /* -+ * if Dedicated FIFOs mode is on then assign a Tx FIFO. -+ */ -+ ep->dwc_ep.tx_fifo_num = -+ assign_tx_fifo(GET_CORE_IF(pcd)); -+ } -+ -+ /* Calculating EP info controller base address */ -+ if (ep->dwc_ep.tx_fifo_num -+ && GET_CORE_IF(pcd)->en_multiple_tx_fifo) { -+ gdfifocfg.d32 = -+ DWC_READ_REG32(&GET_CORE_IF(pcd)-> -+ core_global_regs->gdfifocfg); -+ gdfifocfgbase.d32 = gdfifocfg.d32 >> 16; -+ dptxfsiz.d32 = -+ (DWC_READ_REG32 -+ (&GET_CORE_IF(pcd)->core_global_regs-> -+ dtxfsiz[ep->dwc_ep.tx_fifo_num - 1]) >> 16); -+ gdfifocfg.b.epinfobase = -+ gdfifocfgbase.d32 + dptxfsiz.d32; -+ if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) { -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)-> -+ core_global_regs->gdfifocfg, -+ gdfifocfg.d32); -+ } -+ } -+ } -+ /* Set initial data PID. */ -+ if (ep->dwc_ep.type == UE_BULK) { -+ ep->dwc_ep.data_pid_start = 0; -+ } -+ -+ /* Alloc DMA Descriptors */ -+ if (GET_CORE_IF(pcd)->dma_desc_enable) { -+#ifndef DWC_UTE_PER_IO -+ if (ep->dwc_ep.type != UE_ISOCHRONOUS) { -+#endif -+ ep->dwc_ep.desc_addr = -+ dwc_otg_ep_alloc_desc_chain(dev, -+ &ep->dwc_ep.dma_desc_addr, -+ MAX_DMA_DESC_CNT); -+ if (!ep->dwc_ep.desc_addr) { -+ DWC_WARN("%s, can't allocate DMA descriptor\n", -+ __func__); -+ retval = -DWC_E_SHUTDOWN; -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ goto out; -+ } -+#ifndef DWC_UTE_PER_IO -+ } -+#endif -+ } -+ -+ DWC_DEBUGPL(DBG_PCD, "Activate %s: type=%d, mps=%d desc=%p\n", -+ (ep->dwc_ep.is_in ? "IN" : "OUT"), -+ ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc); -+#ifdef DWC_UTE_PER_IO -+ ep->dwc_ep.xiso_bInterval = 1 << (ep->desc->bInterval - 1); -+#endif -+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { -+ ep->dwc_ep.bInterval = 1 << (ep->desc->bInterval - 1); -+ ep->dwc_ep.frame_num = 0xFFFFFFFF; -+ } -+ -+ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); -+ -+#ifdef DWC_UTE_CFI -+ if (pcd->cfi->ops.ep_enable) { -+ pcd->cfi->ops.ep_enable(pcd->cfi, pcd, ep); -+ } -+#endif -+ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ -+out: -+ return retval; -+} -+ -+/** -+ * This function is being called from gadget -+ * to disable PCD endpoint. -+ */ -+int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ dwc_irqflags_t flags; -+ dwc_otg_dev_dma_desc_t *desc_addr; -+ dwc_dma_t dma_desc_addr; -+ gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 }; -+ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; -+ fifosize_data_t dptxfsiz = {.d32 = 0 }; -+ struct device *dev = dwc_otg_pcd_to_dev(pcd); -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ -+ if (!ep || !ep->desc) { -+ DWC_DEBUGPL(DBG_PCD, "bad ep address\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ -+ dwc_otg_request_nuke(ep); -+ -+ dwc_otg_ep_deactivate(GET_CORE_IF(pcd), &ep->dwc_ep); -+ if (pcd->core_if->core_params->dev_out_nak) { -+ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[ep->dwc_ep.num]); -+ pcd->core_if->ep_xfer_info[ep->dwc_ep.num].state = 0; -+ } -+ ep->desc = NULL; -+ ep->stopped = 1; -+ -+ gdfifocfg.d32 = -+ DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg); -+ gdfifocfgbase.d32 = gdfifocfg.d32 >> 16; -+ -+ if (ep->dwc_ep.is_in) { -+ if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) { -+ /* Flush the Tx FIFO */ -+ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), -+ ep->dwc_ep.tx_fifo_num); -+ } -+ release_perio_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num); -+ release_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num); -+ if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) { -+ /* Decreasing EPinfo Base Addr */ -+ dptxfsiz.d32 = -+ (DWC_READ_REG32 -+ (&GET_CORE_IF(pcd)-> -+ core_global_regs->dtxfsiz[ep->dwc_ep.tx_fifo_num-1]) >> 16); -+ gdfifocfg.b.epinfobase = gdfifocfgbase.d32 - dptxfsiz.d32; -+ if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) { -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg, -+ gdfifocfg.d32); -+ } -+ } -+ } -+ -+ /* Free DMA Descriptors */ -+ if (GET_CORE_IF(pcd)->dma_desc_enable) { -+ if (ep->dwc_ep.type != UE_ISOCHRONOUS) { -+ desc_addr = ep->dwc_ep.desc_addr; -+ dma_desc_addr = ep->dwc_ep.dma_desc_addr; -+ -+ /* Cannot call dma_free_coherent() with IRQs disabled */ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ dwc_otg_ep_free_desc_chain(dev, desc_addr, dma_desc_addr, -+ MAX_DMA_DESC_CNT); -+ -+ goto out_unlocked; -+ } -+ } -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ -+out_unlocked: -+ DWC_DEBUGPL(DBG_PCD, "%d %s disabled\n", ep->dwc_ep.num, -+ ep->dwc_ep.is_in ? "IN" : "OUT"); -+ return 0; -+ -+} -+ -+/******************************************************************************/ -+#ifdef DWC_UTE_PER_IO -+ -+/** -+ * Free the request and its extended parts -+ * -+ */ -+void dwc_pcd_xiso_ereq_free(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req) -+{ -+ DWC_FREE(req->ext_req.per_io_frame_descs); -+ DWC_FREE(req); -+} -+ -+/** -+ * Start the next request in the endpoint's queue. -+ * -+ */ -+int dwc_otg_pcd_xiso_start_next_request(dwc_otg_pcd_t * pcd, -+ dwc_otg_pcd_ep_t * ep) -+{ -+ int i; -+ dwc_otg_pcd_request_t *req = NULL; -+ dwc_ep_t *dwcep = NULL; -+ struct dwc_iso_xreq_port *ereq = NULL; -+ struct dwc_iso_pkt_desc_port *ddesc_iso; -+ uint16_t nat; -+ depctl_data_t diepctl; -+ -+ dwcep = &ep->dwc_ep; -+ -+ if (dwcep->xiso_active_xfers > 0) { -+#if 0 //Disable this to decrease s/w overhead that is crucial for Isoc transfers -+ DWC_WARN("There are currently active transfers for EP%d \ -+ (active=%d; queued=%d)", dwcep->num, dwcep->xiso_active_xfers, -+ dwcep->xiso_queued_xfers); -+#endif -+ return 0; -+ } -+ -+ nat = UGETW(ep->desc->wMaxPacketSize); -+ nat = (nat >> 11) & 0x03; -+ -+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ ereq = &req->ext_req; -+ ep->stopped = 0; -+ -+ /* Get the frame number */ -+ dwcep->xiso_frame_num = -+ dwc_otg_get_frame_number(GET_CORE_IF(pcd)); -+ DWC_DEBUG("FRM_NUM=%d", dwcep->xiso_frame_num); -+ -+ ddesc_iso = ereq->per_io_frame_descs; -+ -+ if (dwcep->is_in) { -+ /* Setup DMA Descriptor chain for IN Isoc request */ -+ for (i = 0; i < ereq->pio_pkt_count; i++) { -+ //if ((i % (nat + 1)) == 0) -+ if ( i > 0 ) -+ dwcep->xiso_frame_num = -+ (dwcep->xiso_bInterval + -+ dwcep->xiso_frame_num) & 0x3FFF; -+ dwcep->desc_addr[i].buf = -+ req->dma + ddesc_iso[i].offset; -+ dwcep->desc_addr[i].status.b_iso_in.txbytes = -+ ddesc_iso[i].length; -+ dwcep->desc_addr[i].status.b_iso_in.framenum = -+ dwcep->xiso_frame_num; -+ dwcep->desc_addr[i].status.b_iso_in.bs = -+ BS_HOST_READY; -+ dwcep->desc_addr[i].status.b_iso_in.txsts = 0; -+ dwcep->desc_addr[i].status.b_iso_in.sp = -+ (ddesc_iso[i].length % -+ dwcep->maxpacket) ? 1 : 0; -+ dwcep->desc_addr[i].status.b_iso_in.ioc = 0; -+ dwcep->desc_addr[i].status.b_iso_in.pid = nat + 1; -+ dwcep->desc_addr[i].status.b_iso_in.l = 0; -+ -+ /* Process the last descriptor */ -+ if (i == ereq->pio_pkt_count - 1) { -+ dwcep->desc_addr[i].status.b_iso_in.ioc = 1; -+ dwcep->desc_addr[i].status.b_iso_in.l = 1; -+ } -+ } -+ -+ /* Setup and start the transfer for this endpoint */ -+ dwcep->xiso_active_xfers++; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->dev_if-> -+ in_ep_regs[dwcep->num]->diepdma, -+ dwcep->dma_desc_addr); -+ diepctl.d32 = 0; -+ diepctl.b.epena = 1; -+ diepctl.b.cnak = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->dev_if-> -+ in_ep_regs[dwcep->num]->diepctl, 0, -+ diepctl.d32); -+ } else { -+ /* Setup DMA Descriptor chain for OUT Isoc request */ -+ for (i = 0; i < ereq->pio_pkt_count; i++) { -+ //if ((i % (nat + 1)) == 0) -+ dwcep->xiso_frame_num = (dwcep->xiso_bInterval + -+ dwcep->xiso_frame_num) & 0x3FFF; -+ dwcep->desc_addr[i].buf = -+ req->dma + ddesc_iso[i].offset; -+ dwcep->desc_addr[i].status.b_iso_out.rxbytes = -+ ddesc_iso[i].length; -+ dwcep->desc_addr[i].status.b_iso_out.framenum = -+ dwcep->xiso_frame_num; -+ dwcep->desc_addr[i].status.b_iso_out.bs = -+ BS_HOST_READY; -+ dwcep->desc_addr[i].status.b_iso_out.rxsts = 0; -+ dwcep->desc_addr[i].status.b_iso_out.sp = -+ (ddesc_iso[i].length % -+ dwcep->maxpacket) ? 1 : 0; -+ dwcep->desc_addr[i].status.b_iso_out.ioc = 0; -+ dwcep->desc_addr[i].status.b_iso_out.pid = nat + 1; -+ dwcep->desc_addr[i].status.b_iso_out.l = 0; -+ -+ /* Process the last descriptor */ -+ if (i == ereq->pio_pkt_count - 1) { -+ dwcep->desc_addr[i].status.b_iso_out.ioc = 1; -+ dwcep->desc_addr[i].status.b_iso_out.l = 1; -+ } -+ } -+ -+ /* Setup and start the transfer for this endpoint */ -+ dwcep->xiso_active_xfers++; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)-> -+ dev_if->out_ep_regs[dwcep->num]-> -+ doepdma, dwcep->dma_desc_addr); -+ diepctl.d32 = 0; -+ diepctl.b.epena = 1; -+ diepctl.b.cnak = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)-> -+ dev_if->out_ep_regs[dwcep->num]-> -+ doepctl, 0, diepctl.d32); -+ } -+ -+ } else { -+ ep->stopped = 1; -+ } -+ -+ return 0; -+} -+ -+/** -+ * - Remove the request from the queue -+ */ -+void complete_xiso_ep(dwc_otg_pcd_ep_t * ep) -+{ -+ dwc_otg_pcd_request_t *req = NULL; -+ struct dwc_iso_xreq_port *ereq = NULL; -+ struct dwc_iso_pkt_desc_port *ddesc_iso = NULL; -+ dwc_ep_t *dwcep = NULL; -+ int i; -+ -+ //DWC_DEBUG(); -+ dwcep = &ep->dwc_ep; -+ -+ /* Get the first pending request from the queue */ -+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ if (!req) { -+ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep); -+ return; -+ } -+ dwcep->xiso_active_xfers--; -+ dwcep->xiso_queued_xfers--; -+ /* Remove this request from the queue */ -+ DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry); -+ } else { -+ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep); -+ return; -+ } -+ -+ ep->stopped = 1; -+ ereq = &req->ext_req; -+ ddesc_iso = ereq->per_io_frame_descs; -+ -+ if (dwcep->xiso_active_xfers < 0) { -+ DWC_WARN("EP#%d (xiso_active_xfers=%d)", dwcep->num, -+ dwcep->xiso_active_xfers); -+ } -+ -+ /* Fill the Isoc descs of portable extended req from dma descriptors */ -+ for (i = 0; i < ereq->pio_pkt_count; i++) { -+ if (dwcep->is_in) { /* IN endpoints */ -+ ddesc_iso[i].actual_length = ddesc_iso[i].length - -+ dwcep->desc_addr[i].status.b_iso_in.txbytes; -+ ddesc_iso[i].status = -+ dwcep->desc_addr[i].status.b_iso_in.txsts; -+ } else { /* OUT endpoints */ -+ ddesc_iso[i].actual_length = ddesc_iso[i].length - -+ dwcep->desc_addr[i].status.b_iso_out.rxbytes; -+ ddesc_iso[i].status = -+ dwcep->desc_addr[i].status.b_iso_out.rxsts; -+ } -+ } -+ -+ DWC_SPINUNLOCK(ep->pcd->lock); -+ -+ /* Call the completion function in the non-portable logic */ -+ ep->pcd->fops->xisoc_complete(ep->pcd, ep->priv, req->priv, 0, -+ &req->ext_req); -+ -+ DWC_SPINLOCK(ep->pcd->lock); -+ -+ /* Free the request - specific freeing needed for extended request object */ -+ dwc_pcd_xiso_ereq_free(ep, req); -+ -+ /* Start the next request */ -+ dwc_otg_pcd_xiso_start_next_request(ep->pcd, ep); -+ -+ return; -+} -+ -+/** -+ * Create and initialize the Isoc pkt descriptors of the extended request. -+ * -+ */ -+static int dwc_otg_pcd_xiso_create_pkt_descs(dwc_otg_pcd_request_t * req, -+ void *ereq_nonport, -+ int atomic_alloc) -+{ -+ struct dwc_iso_xreq_port *ereq = NULL; -+ struct dwc_iso_xreq_port *req_mapped = NULL; -+ struct dwc_iso_pkt_desc_port *ipds = NULL; /* To be created in this function */ -+ uint32_t pkt_count; -+ int i; -+ -+ ereq = &req->ext_req; -+ req_mapped = (struct dwc_iso_xreq_port *)ereq_nonport; -+ pkt_count = req_mapped->pio_pkt_count; -+ -+ /* Create the isoc descs */ -+ if (atomic_alloc) { -+ ipds = DWC_ALLOC_ATOMIC(sizeof(*ipds) * pkt_count); -+ } else { -+ ipds = DWC_ALLOC(sizeof(*ipds) * pkt_count); -+ } -+ -+ if (!ipds) { -+ DWC_ERROR("Failed to allocate isoc descriptors"); -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ /* Initialize the extended request fields */ -+ ereq->per_io_frame_descs = ipds; -+ ereq->error_count = 0; -+ ereq->pio_alloc_pkt_count = pkt_count; -+ ereq->pio_pkt_count = pkt_count; -+ ereq->tr_sub_flags = req_mapped->tr_sub_flags; -+ -+ /* Init the Isoc descriptors */ -+ for (i = 0; i < pkt_count; i++) { -+ ipds[i].length = req_mapped->per_io_frame_descs[i].length; -+ ipds[i].offset = req_mapped->per_io_frame_descs[i].offset; -+ ipds[i].status = req_mapped->per_io_frame_descs[i].status; /* 0 */ -+ ipds[i].actual_length = -+ req_mapped->per_io_frame_descs[i].actual_length; -+ } -+ -+ return 0; -+} -+ -+static void prn_ext_request(struct dwc_iso_xreq_port *ereq) -+{ -+ struct dwc_iso_pkt_desc_port *xfd = NULL; -+ int i; -+ -+ DWC_DEBUG("per_io_frame_descs=%p", ereq->per_io_frame_descs); -+ DWC_DEBUG("tr_sub_flags=%d", ereq->tr_sub_flags); -+ DWC_DEBUG("error_count=%d", ereq->error_count); -+ DWC_DEBUG("pio_alloc_pkt_count=%d", ereq->pio_alloc_pkt_count); -+ DWC_DEBUG("pio_pkt_count=%d", ereq->pio_pkt_count); -+ DWC_DEBUG("res=%d", ereq->res); -+ -+ for (i = 0; i < ereq->pio_pkt_count; i++) { -+ xfd = &ereq->per_io_frame_descs[0]; -+ DWC_DEBUG("FD #%d", i); -+ -+ DWC_DEBUG("xfd->actual_length=%d", xfd->actual_length); -+ DWC_DEBUG("xfd->length=%d", xfd->length); -+ DWC_DEBUG("xfd->offset=%d", xfd->offset); -+ DWC_DEBUG("xfd->status=%d", xfd->status); -+ } -+} -+ -+/** -+ * -+ */ -+int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, -+ uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen, -+ int zero, void *req_handle, int atomic_alloc, -+ void *ereq_nonport) -+{ -+ dwc_otg_pcd_request_t *req = NULL; -+ dwc_otg_pcd_ep_t *ep; -+ dwc_irqflags_t flags; -+ int res; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ if (!ep) { -+ DWC_WARN("bad ep\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ /* We support this extension only for DDMA mode */ -+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) -+ if (!GET_CORE_IF(pcd)->dma_desc_enable) -+ return -DWC_E_INVALID; -+ -+ /* Create a dwc_otg_pcd_request_t object */ -+ if (atomic_alloc) { -+ req = DWC_ALLOC_ATOMIC(sizeof(*req)); -+ } else { -+ req = DWC_ALLOC(sizeof(*req)); -+ } -+ -+ if (!req) { -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ /* Create the Isoc descs for this request which shall be the exact match -+ * of the structure sent to us from the non-portable logic */ -+ res = -+ dwc_otg_pcd_xiso_create_pkt_descs(req, ereq_nonport, atomic_alloc); -+ if (res) { -+ DWC_WARN("Failed to init the Isoc descriptors"); -+ DWC_FREE(req); -+ return res; -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ -+ DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry); -+ req->buf = buf; -+ req->dma = dma_buf; -+ req->length = buflen; -+ req->sent_zlp = zero; -+ req->priv = req_handle; -+ -+ //DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ ep->dwc_ep.dma_addr = dma_buf; -+ ep->dwc_ep.start_xfer_buff = buf; -+ ep->dwc_ep.xfer_buff = buf; -+ ep->dwc_ep.xfer_len = 0; -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = buflen; -+ -+ /* Add this request to the tail */ -+ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry); -+ ep->dwc_ep.xiso_queued_xfers++; -+ -+//DWC_DEBUG("CP_0"); -+//DWC_DEBUG("req->ext_req.tr_sub_flags=%d", req->ext_req.tr_sub_flags); -+//prn_ext_request((struct dwc_iso_xreq_port *) ereq_nonport); -+//prn_ext_request(&req->ext_req); -+ -+ //DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ -+ /* If the req->status == ASAP then check if there is any active transfer -+ * for this endpoint. If no active transfers, then get the first entry -+ * from the queue and start that transfer -+ */ -+ if (req->ext_req.tr_sub_flags == DWC_EREQ_TF_ASAP) { -+ res = dwc_otg_pcd_xiso_start_next_request(pcd, ep); -+ if (res) { -+ DWC_WARN("Failed to start the next Isoc transfer"); -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ DWC_FREE(req); -+ return res; -+ } -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ return 0; -+} -+ -+#endif -+/* END ifdef DWC_UTE_PER_IO ***************************************************/ -+int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, -+ uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen, -+ int zero, void *req_handle, int atomic_alloc) -+{ -+ struct device *dev = dwc_otg_pcd_to_dev(pcd); -+ dwc_irqflags_t flags; -+ dwc_otg_pcd_request_t *req; -+ dwc_otg_pcd_ep_t *ep; -+ uint32_t max_transfer; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) { -+ DWC_WARN("bad ep\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (atomic_alloc) { -+ req = DWC_ALLOC_ATOMIC(sizeof(*req)); -+ } else { -+ req = DWC_ALLOC(sizeof(*req)); -+ } -+ -+ if (!req) { -+ return -DWC_E_NO_MEMORY; -+ } -+ DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry); -+ if (!GET_CORE_IF(pcd)->core_params->opt) { -+ if (ep->dwc_ep.num != 0) { -+ DWC_ERROR("queue req %p, len %d buf %p\n", -+ req_handle, buflen, buf); -+ } -+ } -+ -+ req->buf = buf; -+ req->dma = dma_buf; -+ req->length = buflen; -+ req->sent_zlp = zero; -+ req->priv = req_handle; -+ req->dw_align_buf = NULL; -+ if ((dma_buf & 0x3) && GET_CORE_IF(pcd)->dma_enable -+ && !GET_CORE_IF(pcd)->dma_desc_enable) -+ req->dw_align_buf = DWC_DMA_ALLOC(dev, buflen, -+ &req->dw_align_buf_dma); -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ -+ /* -+ * After adding request to the queue for IN ISOC wait for In Token Received -+ * when TX FIFO is empty interrupt and for OUT ISOC wait for OUT Token -+ * Received when EP is disabled interrupt to obtain starting microframe -+ * (odd/even) start transfer -+ */ -+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { -+ if (req != 0) { -+ depctl_data_t depctl = {.d32 = -+ DWC_READ_REG32(&pcd->core_if->dev_if-> -+ in_ep_regs[ep->dwc_ep.num]-> -+ diepctl) }; -+ ++pcd->request_pending; -+ -+ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry); -+ if (ep->dwc_ep.is_in) { -+ depctl.b.cnak = 1; -+ DWC_WRITE_REG32(&pcd->core_if->dev_if-> -+ in_ep_regs[ep->dwc_ep.num]-> -+ diepctl, depctl.d32); -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ } -+ return 0; -+ } -+ -+ /* -+ * For EP0 IN without premature status, zlp is required? -+ */ -+ if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) { -+ DWC_DEBUGPL(DBG_PCDV, "%d-OUT ZLP\n", ep->dwc_ep.num); -+ //_req->zero = 1; -+ } -+ -+ /* Start the transfer */ -+ if (DWC_CIRCLEQ_EMPTY(&ep->queue) && !ep->stopped) { -+ /* EP0 Transfer? */ -+ if (ep->dwc_ep.num == 0) { -+ switch (pcd->ep0state) { -+ case EP0_IN_DATA_PHASE: -+ DWC_DEBUGPL(DBG_PCD, -+ "%s ep0: EP0_IN_DATA_PHASE\n", -+ __func__); -+ break; -+ -+ case EP0_OUT_DATA_PHASE: -+ DWC_DEBUGPL(DBG_PCD, -+ "%s ep0: EP0_OUT_DATA_PHASE\n", -+ __func__); -+ if (pcd->request_config) { -+ /* Complete STATUS PHASE */ -+ ep->dwc_ep.is_in = 1; -+ pcd->ep0state = EP0_IN_STATUS_PHASE; -+ } -+ break; -+ -+ case EP0_IN_STATUS_PHASE: -+ DWC_DEBUGPL(DBG_PCD, -+ "%s ep0: EP0_IN_STATUS_PHASE\n", -+ __func__); -+ break; -+ -+ default: -+ DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n", -+ pcd->ep0state); -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ return -DWC_E_SHUTDOWN; -+ } -+ -+ ep->dwc_ep.dma_addr = dma_buf; -+ ep->dwc_ep.start_xfer_buff = buf; -+ ep->dwc_ep.xfer_buff = buf; -+ ep->dwc_ep.xfer_len = buflen; -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; -+ -+ if (zero) { -+ if ((ep->dwc_ep.xfer_len % -+ ep->dwc_ep.maxpacket == 0) -+ && (ep->dwc_ep.xfer_len != 0)) { -+ ep->dwc_ep.sent_zlp = 1; -+ } -+ -+ } -+ -+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), -+ &ep->dwc_ep); -+ } // non-ep0 endpoints -+ else { -+#ifdef DWC_UTE_CFI -+ if (ep->dwc_ep.buff_mode != BM_STANDARD) { -+ /* store the request length */ -+ ep->dwc_ep.cfi_req_len = buflen; -+ pcd->cfi->ops.build_descriptors(pcd->cfi, pcd, -+ ep, req); -+ } else { -+#endif -+ max_transfer = -+ GET_CORE_IF(ep->pcd)->core_params-> -+ max_transfer_size; -+ -+ /* Setup and start the Transfer */ -+ if (req->dw_align_buf){ -+ if (ep->dwc_ep.is_in) -+ dwc_memcpy(req->dw_align_buf, -+ buf, buflen); -+ ep->dwc_ep.dma_addr = -+ req->dw_align_buf_dma; -+ ep->dwc_ep.start_xfer_buff = -+ req->dw_align_buf; -+ ep->dwc_ep.xfer_buff = -+ req->dw_align_buf; -+ } else { -+ ep->dwc_ep.dma_addr = dma_buf; -+ ep->dwc_ep.start_xfer_buff = buf; -+ ep->dwc_ep.xfer_buff = buf; -+ } -+ ep->dwc_ep.xfer_len = 0; -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = buflen; -+ -+ ep->dwc_ep.maxxfer = max_transfer; -+ if (GET_CORE_IF(pcd)->dma_desc_enable) { -+ uint32_t out_max_xfer = -+ DDMA_MAX_TRANSFER_SIZE - -+ (DDMA_MAX_TRANSFER_SIZE % 4); -+ if (ep->dwc_ep.is_in) { -+ if (ep->dwc_ep.maxxfer > -+ DDMA_MAX_TRANSFER_SIZE) { -+ ep->dwc_ep.maxxfer = -+ DDMA_MAX_TRANSFER_SIZE; -+ } -+ } else { -+ if (ep->dwc_ep.maxxfer > -+ out_max_xfer) { -+ ep->dwc_ep.maxxfer = -+ out_max_xfer; -+ } -+ } -+ } -+ if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) { -+ ep->dwc_ep.maxxfer -= -+ (ep->dwc_ep.maxxfer % -+ ep->dwc_ep.maxpacket); -+ } -+ -+ if (zero) { -+ if ((ep->dwc_ep.total_len % -+ ep->dwc_ep.maxpacket == 0) -+ && (ep->dwc_ep.total_len != 0)) { -+ ep->dwc_ep.sent_zlp = 1; -+ } -+ } -+#ifdef DWC_UTE_CFI -+ } -+#endif -+ dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), -+ &ep->dwc_ep); -+ } -+ } -+ -+ if (req != 0) { -+ ++pcd->request_pending; -+ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry); -+ if (ep->dwc_ep.is_in && ep->stopped -+ && !(GET_CORE_IF(pcd)->dma_enable)) { -+ /** @todo NGS Create a function for this. */ -+ diepmsk_data_t diepmsk = {.d32 = 0 }; -+ diepmsk.b.intktxfemp = 1; -+ if (GET_CORE_IF(pcd)->multiproc_int_enable) { -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)-> -+ dev_if->dev_global_regs->diepeachintmsk -+ [ep->dwc_ep.num], 0, -+ diepmsk.d32); -+ } else { -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)-> -+ dev_if->dev_global_regs-> -+ diepmsk, 0, diepmsk.d32); -+ } -+ -+ } -+ } -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ -+ return 0; -+} -+ -+int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle) -+{ -+ dwc_irqflags_t flags; -+ dwc_otg_pcd_request_t *req; -+ dwc_otg_pcd_ep_t *ep; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) { -+ DWC_WARN("bad argument\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ -+ /* make sure it's actually queued on this endpoint */ -+ DWC_CIRCLEQ_FOREACH(req, &ep->queue, queue_entry) { -+ if (req->priv == (void *)req_handle) { -+ break; -+ } -+ } -+ -+ if (req->priv != (void *)req_handle) { -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ return -DWC_E_INVALID; -+ } -+ -+ if (!DWC_CIRCLEQ_EMPTY_ENTRY(req, queue_entry)) { -+ dwc_otg_request_done(ep, req, -DWC_E_RESTART); -+ } else { -+ req = NULL; -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ -+ return req ? 0 : -DWC_E_SHUTDOWN; -+ -+} -+ -+/** -+ * dwc_otg_pcd_ep_wedge - sets the halt feature and ignores clear requests -+ * -+ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT) -+ * requests. If the gadget driver clears the halt status, it will -+ * automatically unwedge the endpoint. -+ * -+ * Returns zero on success, else negative DWC error code. -+ */ -+int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ dwc_irqflags_t flags; -+ int retval = 0; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ -+ if ((!ep->desc && ep != &pcd->ep0) || -+ (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) { -+ DWC_WARN("%s, bad ep\n", __func__); -+ return -DWC_E_INVALID; -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num, -+ ep->dwc_ep.is_in ? "IN" : "OUT"); -+ retval = -DWC_E_AGAIN; -+ } else { -+ /* This code needs to be reviewed */ -+ if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) { -+ dtxfsts_data_t txstatus; -+ fifosize_data_t txfifosize; -+ -+ txfifosize.d32 = -+ DWC_READ_REG32(&GET_CORE_IF(pcd)-> -+ core_global_regs->dtxfsiz[ep->dwc_ep. -+ tx_fifo_num]); -+ txstatus.d32 = -+ DWC_READ_REG32(&GET_CORE_IF(pcd)-> -+ dev_if->in_ep_regs[ep->dwc_ep.num]-> -+ dtxfsts); -+ -+ if (txstatus.b.txfspcavail < txfifosize.b.depth) { -+ DWC_WARN("%s() Data In Tx Fifo\n", __func__); -+ retval = -DWC_E_AGAIN; -+ } else { -+ if (ep->dwc_ep.num == 0) { -+ pcd->ep0state = EP0_STALL; -+ } -+ -+ ep->stopped = 1; -+ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), -+ &ep->dwc_ep); -+ } -+ } else { -+ if (ep->dwc_ep.num == 0) { -+ pcd->ep0state = EP0_STALL; -+ } -+ -+ ep->stopped = 1; -+ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep); -+ } -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ -+ return retval; -+} -+ -+int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ dwc_irqflags_t flags; -+ int retval = 0; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ -+ if (!ep || (!ep->desc && ep != &pcd->ep0) || -+ (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) { -+ DWC_WARN("%s, bad ep\n", __func__); -+ return -DWC_E_INVALID; -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num, -+ ep->dwc_ep.is_in ? "IN" : "OUT"); -+ retval = -DWC_E_AGAIN; -+ } else if (value == 0) { -+ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep); -+ } else if (value == 1) { -+ if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) { -+ dtxfsts_data_t txstatus; -+ fifosize_data_t txfifosize; -+ -+ txfifosize.d32 = -+ DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs-> -+ dtxfsiz[ep->dwc_ep.tx_fifo_num]); -+ txstatus.d32 = -+ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if-> -+ in_ep_regs[ep->dwc_ep.num]->dtxfsts); -+ -+ if (txstatus.b.txfspcavail < txfifosize.b.depth) { -+ DWC_WARN("%s() Data In Tx Fifo\n", __func__); -+ retval = -DWC_E_AGAIN; -+ } else { -+ if (ep->dwc_ep.num == 0) { -+ pcd->ep0state = EP0_STALL; -+ } -+ -+ ep->stopped = 1; -+ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), -+ &ep->dwc_ep); -+ } -+ } else { -+ if (ep->dwc_ep.num == 0) { -+ pcd->ep0state = EP0_STALL; -+ } -+ -+ ep->stopped = 1; -+ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep); -+ } -+ } else if (value == 2) { -+ ep->dwc_ep.stall_clear_flag = 0; -+ } else if (value == 3) { -+ ep->dwc_ep.stall_clear_flag = 1; -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ -+ return retval; -+} -+ -+/** -+ * This function initiates remote wakeup of the host from suspend state. -+ */ -+void dwc_otg_pcd_rem_wkup_from_suspend(dwc_otg_pcd_t * pcd, int set) -+{ -+ dctl_data_t dctl = { 0 }; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dsts_data_t dsts; -+ -+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ if (!dsts.b.suspsts) { -+ DWC_WARN("Remote wakeup while is not in suspend state\n"); -+ } -+ /* Check if DEVICE_REMOTE_WAKEUP feature enabled */ -+ if (pcd->remote_wakeup_enable) { -+ if (set) { -+ -+ if (core_if->adp_enable) { -+ gpwrdn_data_t gpwrdn; -+ -+ dwc_otg_adp_probe_stop(core_if); -+ -+ /* Mask SRP detected interrupt from Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.srp_det_msk = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs->gpwrdn, -+ gpwrdn.d32, 0); -+ -+ /* Disable Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs->gpwrdn, -+ gpwrdn.d32, 0); -+ -+ /* -+ * Initialize the Core for Device mode. -+ */ -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ -+ dwc_otg_initiate_srp(core_if); -+ } -+ -+ dctl.b.rmtwkupsig = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ dctl, 0, dctl.d32); -+ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n"); -+ -+ dwc_mdelay(2); -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ dctl, dctl.d32, 0); -+ DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n"); -+ } -+ } else { -+ DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n"); -+ } -+} -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+/** -+ * This function initiates remote wakeup of the host from L1 sleep state. -+ */ -+void dwc_otg_pcd_rem_wkup_from_sleep(dwc_otg_pcd_t * pcd, int set) -+{ -+ glpmcfg_data_t lpmcfg; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ -+ /* Check if we are in L1 state */ -+ if (!lpmcfg.b.prt_sleep_sts) { -+ DWC_DEBUGPL(DBG_PCD, "Device is not in sleep state\n"); -+ return; -+ } -+ -+ /* Check if host allows remote wakeup */ -+ if (!lpmcfg.b.rem_wkup_en) { -+ DWC_DEBUGPL(DBG_PCD, "Host does not allow remote wakeup\n"); -+ return; -+ } -+ -+ /* Check if Resume OK */ -+ if (!lpmcfg.b.sleep_state_resumeok) { -+ DWC_DEBUGPL(DBG_PCD, "Sleep state resume is not OK\n"); -+ return; -+ } -+ -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ lpmcfg.b.en_utmi_sleep = 0; -+ lpmcfg.b.hird_thres &= (~(1 << 4)); -+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); -+ -+ if (set) { -+ dctl_data_t dctl = {.d32 = 0 }; -+ dctl.b.rmtwkupsig = 1; -+ /* Set RmtWkUpSig bit to start remote wakup signaling. -+ * Hardware will automatically clear this bit. -+ */ -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, -+ 0, dctl.d32); -+ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n"); -+ } -+ -+} -+#endif -+ -+/** -+ * Performs remote wakeup. -+ */ -+void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_irqflags_t flags; -+ if (dwc_otg_is_device_mode(core_if)) { -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ if (core_if->lx_state == DWC_OTG_L1) { -+ dwc_otg_pcd_rem_wkup_from_sleep(pcd, set); -+ } else { -+#endif -+ dwc_otg_pcd_rem_wkup_from_suspend(pcd, set); -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ } -+#endif -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ } -+ return; -+} -+ -+void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dctl_data_t dctl = { 0 }; -+ -+ if (dwc_otg_is_device_mode(core_if)) { -+ dctl.b.sftdiscon = 1; -+ DWC_PRINTF("Soft disconnect for %d useconds\n",no_of_usecs); -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); -+ dwc_udelay(no_of_usecs); -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32,0); -+ -+ } else{ -+ DWC_PRINTF("NOT SUPPORTED IN HOST MODE\n"); -+ } -+ return; -+ -+} -+ -+int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd) -+{ -+ dsts_data_t dsts; -+ gotgctl_data_t gotgctl; -+ -+ /* -+ * This function starts the Protocol if no session is in progress. If -+ * a session is already in progress, but the device is suspended, -+ * remote wakeup signaling is started. -+ */ -+ -+ /* Check if valid session */ -+ gotgctl.d32 = -+ DWC_READ_REG32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl)); -+ if (gotgctl.b.bsesvld) { -+ /* Check if suspend state */ -+ dsts.d32 = -+ DWC_READ_REG32(& -+ (GET_CORE_IF(pcd)->dev_if-> -+ dev_global_regs->dsts)); -+ if (dsts.b.suspsts) { -+ dwc_otg_pcd_remote_wakeup(pcd, 1); -+ } -+ } else { -+ dwc_otg_pcd_initiate_srp(pcd); -+ } -+ -+ return 0; -+ -+} -+ -+/** -+ * Start the SRP timer to detect when the SRP does not complete within -+ * 6 seconds. -+ * -+ * @param pcd the pcd structure. -+ */ -+void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd) -+{ -+ dwc_irqflags_t flags; -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ dwc_otg_initiate_srp(GET_CORE_IF(pcd)); -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+} -+ -+int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd) -+{ -+ return dwc_otg_get_frame_number(GET_CORE_IF(pcd)); -+} -+ -+int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd) -+{ -+ return GET_CORE_IF(pcd)->core_params->lpm_enable; -+} -+ -+uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd) -+{ -+ return pcd->b_hnp_enable; -+} -+ -+uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd) -+{ -+ return pcd->a_hnp_support; -+} -+ -+uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd) -+{ -+ return pcd->a_alt_hnp_support; -+} -+ -+int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd) -+{ -+ return pcd->remote_wakeup_enable; -+} -+ -+#endif /* DWC_HOST_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd.h -@@ -0,0 +1,273 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $ -+ * $Revision: #48 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_HOST_ONLY -+#if !defined(__DWC_PCD_H__) -+#define __DWC_PCD_H__ -+ -+#include "dwc_otg_os_dep.h" -+#include "usb.h" -+#include "dwc_otg_cil.h" -+#include "dwc_otg_pcd_if.h" -+#include "dwc_otg_driver.h" -+ -+struct cfiobject; -+ -+/** -+ * @file -+ * -+ * This file contains the structures, constants, and interfaces for -+ * the Perpherial Contoller Driver (PCD). -+ * -+ * The Peripheral Controller Driver (PCD) for Linux will implement the -+ * Gadget API, so that the existing Gadget drivers can be used. For -+ * the Mass Storage Function driver the File-backed USB Storage Gadget -+ * (FBS) driver will be used. The FBS driver supports the -+ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only -+ * transports. -+ * -+ */ -+ -+/** Invalid DMA Address */ -+#define DWC_DMA_ADDR_INVALID (~(dwc_dma_t)0) -+ -+/** Max Transfer size for any EP */ -+#define DDMA_MAX_TRANSFER_SIZE 65535 -+ -+/** -+ * Get the pointer to the core_if from the pcd pointer. -+ */ -+#define GET_CORE_IF( _pcd ) (_pcd->core_if) -+ -+/** -+ * States of EP0. -+ */ -+typedef enum ep0_state { -+ EP0_DISCONNECT, /* no host */ -+ EP0_IDLE, -+ EP0_IN_DATA_PHASE, -+ EP0_OUT_DATA_PHASE, -+ EP0_IN_STATUS_PHASE, -+ EP0_OUT_STATUS_PHASE, -+ EP0_STALL, -+} ep0state_e; -+ -+/** Fordward declaration.*/ -+struct dwc_otg_pcd; -+ -+/** DWC_otg iso request structure. -+ * -+ */ -+typedef struct usb_iso_request dwc_otg_pcd_iso_request_t; -+ -+#ifdef DWC_UTE_PER_IO -+ -+/** -+ * This shall be the exact analogy of the same type structure defined in the -+ * usb_gadget.h. Each descriptor contains -+ */ -+struct dwc_iso_pkt_desc_port { -+ uint32_t offset; -+ uint32_t length; /* expected length */ -+ uint32_t actual_length; -+ uint32_t status; -+}; -+ -+struct dwc_iso_xreq_port { -+ /** transfer/submission flag */ -+ uint32_t tr_sub_flags; -+ /** Start the request ASAP */ -+#define DWC_EREQ_TF_ASAP 0x00000002 -+ /** Just enqueue the request w/o initiating a transfer */ -+#define DWC_EREQ_TF_ENQUEUE 0x00000004 -+ -+ /** -+ * count of ISO packets attached to this request - shall -+ * not exceed the pio_alloc_pkt_count -+ */ -+ uint32_t pio_pkt_count; -+ /** count of ISO packets allocated for this request */ -+ uint32_t pio_alloc_pkt_count; -+ /** number of ISO packet errors */ -+ uint32_t error_count; -+ /** reserved for future extension */ -+ uint32_t res; -+ /** Will be allocated and freed in the UTE gadget and based on the CFC value */ -+ struct dwc_iso_pkt_desc_port *per_io_frame_descs; -+}; -+#endif -+/** DWC_otg request structure. -+ * This structure is a list of requests. -+ */ -+typedef struct dwc_otg_pcd_request { -+ void *priv; -+ void *buf; -+ dwc_dma_t dma; -+ uint32_t length; -+ uint32_t actual; -+ unsigned sent_zlp:1; -+ /** -+ * Used instead of original buffer if -+ * it(physical address) is not dword-aligned. -+ **/ -+ uint8_t *dw_align_buf; -+ dwc_dma_t dw_align_buf_dma; -+ -+ DWC_CIRCLEQ_ENTRY(dwc_otg_pcd_request) queue_entry; -+#ifdef DWC_UTE_PER_IO -+ struct dwc_iso_xreq_port ext_req; -+ //void *priv_ereq_nport; /* */ -+#endif -+} dwc_otg_pcd_request_t; -+ -+DWC_CIRCLEQ_HEAD(req_list, dwc_otg_pcd_request); -+ -+/** PCD EP structure. -+ * This structure describes an EP, there is an array of EPs in the PCD -+ * structure. -+ */ -+typedef struct dwc_otg_pcd_ep { -+ /** USB EP Descriptor */ -+ const usb_endpoint_descriptor_t *desc; -+ -+ /** queue of dwc_otg_pcd_requests. */ -+ struct req_list queue; -+ unsigned stopped:1; -+ unsigned disabling:1; -+ unsigned dma:1; -+ unsigned queue_sof:1; -+ -+#ifdef DWC_EN_ISOC -+ /** ISOC req handle passed */ -+ void *iso_req_handle; -+#endif //_EN_ISOC_ -+ -+ /** DWC_otg ep data. */ -+ dwc_ep_t dwc_ep; -+ -+ /** Pointer to PCD */ -+ struct dwc_otg_pcd *pcd; -+ -+ void *priv; -+} dwc_otg_pcd_ep_t; -+ -+/** DWC_otg PCD Structure. -+ * This structure encapsulates the data for the dwc_otg PCD. -+ */ -+struct dwc_otg_pcd { -+ const struct dwc_otg_pcd_function_ops *fops; -+ /** The DWC otg device pointer */ -+ struct dwc_otg_device *otg_dev; -+ /** Core Interface */ -+ dwc_otg_core_if_t *core_if; -+ /** State of EP0 */ -+ ep0state_e ep0state; -+ /** EP0 Request is pending */ -+ unsigned ep0_pending:1; -+ /** Indicates when SET CONFIGURATION Request is in process */ -+ unsigned request_config:1; -+ /** The state of the Remote Wakeup Enable. */ -+ unsigned remote_wakeup_enable:1; -+ /** The state of the B-Device HNP Enable. */ -+ unsigned b_hnp_enable:1; -+ /** The state of A-Device HNP Support. */ -+ unsigned a_hnp_support:1; -+ /** The state of the A-Device Alt HNP support. */ -+ unsigned a_alt_hnp_support:1; -+ /** Count of pending Requests */ -+ unsigned request_pending; -+ -+ /** SETUP packet for EP0 -+ * This structure is allocated as a DMA buffer on PCD initialization -+ * with enough space for up to 3 setup packets. -+ */ -+ union { -+ usb_device_request_t req; -+ uint32_t d32[2]; -+ } *setup_pkt; -+ -+ dwc_dma_t setup_pkt_dma_handle; -+ -+ /* Additional buffer and flag for CTRL_WR premature case */ -+ uint8_t *backup_buf; -+ unsigned data_terminated; -+ -+ /** 2-byte dma buffer used to return status from GET_STATUS */ -+ uint16_t *status_buf; -+ dwc_dma_t status_buf_dma_handle; -+ -+ /** EP0 */ -+ dwc_otg_pcd_ep_t ep0; -+ -+ /** Array of IN EPs. */ -+ dwc_otg_pcd_ep_t in_ep[MAX_EPS_CHANNELS - 1]; -+ /** Array of OUT EPs. */ -+ dwc_otg_pcd_ep_t out_ep[MAX_EPS_CHANNELS - 1]; -+ /** number of valid EPs in the above array. */ -+// unsigned num_eps : 4; -+ dwc_spinlock_t *lock; -+ -+ /** Tasklet to defer starting of TEST mode transmissions until -+ * Status Phase has been completed. -+ */ -+ dwc_tasklet_t *test_mode_tasklet; -+ -+ /** Tasklet to delay starting of xfer in DMA mode */ -+ dwc_tasklet_t *start_xfer_tasklet; -+ -+ /** The test mode to enter when the tasklet is executed. */ -+ unsigned test_mode; -+ /** The cfi_api structure that implements most of the CFI API -+ * and OTG specific core configuration functionality -+ */ -+#ifdef DWC_UTE_CFI -+ struct cfiobject *cfi; -+#endif -+ -+}; -+ -+static inline struct device *dwc_otg_pcd_to_dev(struct dwc_otg_pcd *pcd) -+{ -+ return &pcd->otg_dev->os_dep.platformdev->dev; -+} -+ -+//FIXME this functions should be static, and this prototypes should be removed -+extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep); -+extern void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep, -+ dwc_otg_pcd_request_t * req, int32_t status); -+ -+void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep, -+ void *req_handle); -+ -+extern void do_test_mode(void *data); -+#endif -+#endif /* DWC_HOST_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h -@@ -0,0 +1,361 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_if.h $ -+ * $Revision: #11 $ -+ * $Date: 2011/10/26 $ -+ * $Change: 1873028 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_HOST_ONLY -+ -+#if !defined(__DWC_PCD_IF_H__) -+#define __DWC_PCD_IF_H__ -+ -+//#include "dwc_os.h" -+#include "dwc_otg_core_if.h" -+#include "dwc_otg_driver.h" -+ -+/** @file -+ * This file defines DWC_OTG PCD Core API. -+ */ -+ -+struct dwc_otg_pcd; -+typedef struct dwc_otg_pcd dwc_otg_pcd_t; -+ -+/** Maxpacket size for EP0 */ -+#define MAX_EP0_SIZE 64 -+/** Maxpacket size for any EP */ -+#define MAX_PACKET_SIZE 1024 -+ -+/** @name Function Driver Callbacks */ -+/** @{ */ -+ -+/** This function will be called whenever a previously queued request has -+ * completed. The status value will be set to -DWC_E_SHUTDOWN to indicated a -+ * failed or aborted transfer, or -DWC_E_RESTART to indicate the device was reset, -+ * or -DWC_E_TIMEOUT to indicate it timed out, or -DWC_E_INVALID to indicate invalid -+ * parameters. */ -+typedef int (*dwc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle, int32_t status, -+ uint32_t actual); -+/** -+ * This function will be called whenever a previousle queued ISOC request has -+ * completed. Count of ISOC packets could be read using dwc_otg_pcd_get_iso_packet_count -+ * function. -+ * The status of each ISOC packet could be read using dwc_otg_pcd_get_iso_packet_* -+ * functions. -+ */ -+typedef int (*dwc_isoc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle, int proc_buf_num); -+/** This function should handle any SETUP request that cannot be handled by the -+ * PCD Core. This includes most GET_DESCRIPTORs, SET_CONFIGS, Any -+ * class-specific requests, etc. The function must non-blocking. -+ * -+ * Returns 0 on success. -+ * Returns -DWC_E_NOT_SUPPORTED if the request is not supported. -+ * Returns -DWC_E_INVALID if the setup request had invalid parameters or bytes. -+ * Returns -DWC_E_SHUTDOWN on any other error. */ -+typedef int (*dwc_setup_cb_t) (dwc_otg_pcd_t * pcd, uint8_t * bytes); -+/** This is called whenever the device has been disconnected. The function -+ * driver should take appropriate action to clean up all pending requests in the -+ * PCD Core, remove all endpoints (except ep0), and initialize back to reset -+ * state. */ -+typedef int (*dwc_disconnect_cb_t) (dwc_otg_pcd_t * pcd); -+/** This function is called when device has been connected. */ -+typedef int (*dwc_connect_cb_t) (dwc_otg_pcd_t * pcd, int speed); -+/** This function is called when device has been suspended */ -+typedef int (*dwc_suspend_cb_t) (dwc_otg_pcd_t * pcd); -+/** This function is called when device has received LPM tokens, i.e. -+ * device has been sent to sleep state. */ -+typedef int (*dwc_sleep_cb_t) (dwc_otg_pcd_t * pcd); -+/** This function is called when device has been resumed -+ * from suspend(L2) or L1 sleep state. */ -+typedef int (*dwc_resume_cb_t) (dwc_otg_pcd_t * pcd); -+/** This function is called whenever hnp params has been changed. -+ * User can call get_b_hnp_enable, get_a_hnp_support, get_a_alt_hnp_support functions -+ * to get hnp parameters. */ -+typedef int (*dwc_hnp_params_changed_cb_t) (dwc_otg_pcd_t * pcd); -+/** This function is called whenever USB RESET is detected. */ -+typedef int (*dwc_reset_cb_t) (dwc_otg_pcd_t * pcd); -+ -+typedef int (*cfi_setup_cb_t) (dwc_otg_pcd_t * pcd, void *ctrl_req_bytes); -+ -+/** -+ * -+ * @param ep_handle Void pointer to the usb_ep structure -+ * @param ereq_port Pointer to the extended request structure created in the -+ * portable part. -+ */ -+typedef int (*xiso_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle, int32_t status, -+ void *ereq_port); -+/** Function Driver Ops Data Structure */ -+struct dwc_otg_pcd_function_ops { -+ dwc_connect_cb_t connect; -+ dwc_disconnect_cb_t disconnect; -+ dwc_setup_cb_t setup; -+ dwc_completion_cb_t complete; -+ dwc_isoc_completion_cb_t isoc_complete; -+ dwc_suspend_cb_t suspend; -+ dwc_sleep_cb_t sleep; -+ dwc_resume_cb_t resume; -+ dwc_reset_cb_t reset; -+ dwc_hnp_params_changed_cb_t hnp_changed; -+ cfi_setup_cb_t cfi_setup; -+#ifdef DWC_UTE_PER_IO -+ xiso_completion_cb_t xisoc_complete; -+#endif -+}; -+/** @} */ -+ -+/** @name Function Driver Functions */ -+/** @{ */ -+ -+/** Call this function to get pointer on dwc_otg_pcd_t, -+ * this pointer will be used for all PCD API functions. -+ * -+ * @param core_if The DWC_OTG Core -+ */ -+extern dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_device_t *otg_dev); -+ -+/** Frees PCD allocated by dwc_otg_pcd_init -+ * -+ * @param pcd The PCD -+ */ -+extern void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd); -+ -+/** Call this to bind the function driver to the PCD Core. -+ * -+ * @param pcd Pointer on dwc_otg_pcd_t returned by dwc_otg_pcd_init function. -+ * @param fops The Function Driver Ops data structure containing pointers to all callbacks. -+ */ -+extern void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd, -+ const struct dwc_otg_pcd_function_ops *fops); -+ -+/** Enables an endpoint for use. This function enables an endpoint in -+ * the PCD. The endpoint is described by the ep_desc which has the -+ * same format as a USB ep descriptor. The ep_handle parameter is used to refer -+ * to the endpoint from other API functions and in callbacks. Normally this -+ * should be called after a SET_CONFIGURATION/SET_INTERFACE to configure the -+ * core for that interface. -+ * -+ * Returns -DWC_E_INVALID if invalid parameters were passed. -+ * Returns -DWC_E_SHUTDOWN if any other error ocurred. -+ * Returns 0 on success. -+ * -+ * @param pcd The PCD -+ * @param ep_desc Endpoint descriptor -+ * @param usb_ep Handle on endpoint, that will be used to identify endpoint. -+ */ -+extern int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd, -+ const uint8_t * ep_desc, void *usb_ep); -+ -+/** Disable the endpoint referenced by ep_handle. -+ * -+ * Returns -DWC_E_INVALID if invalid parameters were passed. -+ * Returns -DWC_E_SHUTDOWN if any other error occurred. -+ * Returns 0 on success. */ -+extern int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle); -+ -+/** Queue a data transfer request on the endpoint referenced by ep_handle. -+ * After the transfer is completes, the complete callback will be called with -+ * the request status. -+ * -+ * @param pcd The PCD -+ * @param ep_handle The handle of the endpoint -+ * @param buf The buffer for the data -+ * @param dma_buf The DMA buffer for the data -+ * @param buflen The length of the data transfer -+ * @param zero Specifies whether to send zero length last packet. -+ * @param req_handle Set this handle to any value to use to reference this -+ * request in the ep_dequeue function or from the complete callback -+ * @param atomic_alloc If driver need to perform atomic allocations -+ * for internal data structures. -+ * -+ * Returns -DWC_E_INVALID if invalid parameters were passed. -+ * Returns -DWC_E_SHUTDOWN if any other error ocurred. -+ * Returns 0 on success. */ -+extern int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, -+ uint8_t * buf, dwc_dma_t dma_buf, -+ uint32_t buflen, int zero, void *req_handle, -+ int atomic_alloc); -+#ifdef DWC_UTE_PER_IO -+/** -+ * -+ * @param ereq_nonport Pointer to the extended request part of the -+ * usb_request structure defined in usb_gadget.h file. -+ */ -+extern int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, -+ uint8_t * buf, dwc_dma_t dma_buf, -+ uint32_t buflen, int zero, -+ void *req_handle, int atomic_alloc, -+ void *ereq_nonport); -+ -+#endif -+ -+/** De-queue the specified data transfer that has not yet completed. -+ * -+ * Returns -DWC_E_INVALID if invalid parameters were passed. -+ * Returns -DWC_E_SHUTDOWN if any other error ocurred. -+ * Returns 0 on success. */ -+extern int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle); -+ -+/** Halt (STALL) an endpoint or clear it. -+ * -+ * Returns -DWC_E_INVALID if invalid parameters were passed. -+ * Returns -DWC_E_SHUTDOWN if any other error ocurred. -+ * Returns -DWC_E_AGAIN if the STALL cannot be sent and must be tried again later -+ * Returns 0 on success. */ -+extern int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value); -+ -+/** This function */ -+extern int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle); -+ -+/** This function should be called on every hardware interrupt */ -+extern int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd); -+ -+/** This function returns current frame number */ -+extern int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd); -+ -+/** -+ * Start isochronous transfers on the endpoint referenced by ep_handle. -+ * For isochronous transfers duble buffering is used. -+ * After processing each of buffers comlete callback will be called with -+ * status for each transaction. -+ * -+ * @param pcd The PCD -+ * @param ep_handle The handle of the endpoint -+ * @param buf0 The virtual address of first data buffer -+ * @param buf1 The virtual address of second data buffer -+ * @param dma0 The DMA address of first data buffer -+ * @param dma1 The DMA address of second data buffer -+ * @param sync_frame Data pattern frame number -+ * @param dp_frame Data size for pattern frame -+ * @param data_per_frame Data size for regular frame -+ * @param start_frame Frame number to start transfers, if -1 then start transfers ASAP. -+ * @param buf_proc_intrvl Interval of ISOC Buffer processing -+ * @param req_handle Handle of ISOC request -+ * @param atomic_alloc Specefies whether to perform atomic allocation for -+ * internal data structures. -+ * -+ * Returns -DWC_E_NO_MEMORY if there is no enough memory. -+ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function. -+ * Returns -DW_E_SHUTDOWN for any other error. -+ * Returns 0 on success -+ */ -+extern int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle, -+ uint8_t * buf0, uint8_t * buf1, -+ dwc_dma_t dma0, dwc_dma_t dma1, -+ int sync_frame, int dp_frame, -+ int data_per_frame, int start_frame, -+ int buf_proc_intrvl, void *req_handle, -+ int atomic_alloc); -+ -+/** Stop ISOC transfers on endpoint referenced by ep_handle. -+ * -+ * @param pcd The PCD -+ * @param ep_handle The handle of the endpoint -+ * @param req_handle Handle of ISOC request -+ * -+ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function -+ * Returns 0 on success -+ */ -+int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle); -+ -+/** Get ISOC packet status. -+ * -+ * @param pcd The PCD -+ * @param ep_handle The handle of the endpoint -+ * @param iso_req_handle Isochronoush request handle -+ * @param packet Number of packet -+ * @param status Out parameter for returning status -+ * @param actual Out parameter for returning actual length -+ * @param offset Out parameter for returning offset -+ * -+ */ -+extern void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd, -+ void *ep_handle, -+ void *iso_req_handle, int packet, -+ int *status, int *actual, -+ int *offset); -+ -+/** Get ISOC packet count. -+ * -+ * @param pcd The PCD -+ * @param ep_handle The handle of the endpoint -+ * @param iso_req_handle -+ */ -+extern int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd, -+ void *ep_handle, -+ void *iso_req_handle); -+ -+/** This function starts the SRP Protocol if no session is in progress. If -+ * a session is already in progress, but the device is suspended, -+ * remote wakeup signaling is started. -+ */ -+extern int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd); -+ -+/** This function returns 1 if LPM support is enabled, and 0 otherwise. */ -+extern int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd); -+ -+/** This function returns 1 if remote wakeup is allowed and 0, otherwise. */ -+extern int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd); -+ -+/** Initiate SRP */ -+extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd); -+ -+/** Starts remote wakeup signaling. */ -+extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set); -+ -+/** Starts micorsecond soft disconnect. */ -+extern void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs); -+/** This function returns whether device is dualspeed.*/ -+extern uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd); -+ -+/** This function returns whether device is otg. */ -+extern uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd); -+ -+/** These functions allow to get hnp parameters */ -+extern uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd); -+extern uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd); -+extern uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd); -+ -+/** CFI specific Interface functions */ -+/** Allocate a cfi buffer */ -+extern uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, -+ dwc_dma_t * addr, size_t buflen, -+ int flags); -+ -+/******************************************************************************/ -+ -+/** @} */ -+ -+#endif /* __DWC_PCD_IF_H__ */ -+ -+#endif /* DWC_HOST_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c -@@ -0,0 +1,5148 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $ -+ * $Revision: #116 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_HOST_ONLY -+ -+#include "dwc_otg_pcd.h" -+ -+#ifdef DWC_UTE_CFI -+#include "dwc_otg_cfi.h" -+#endif -+ -+#ifdef DWC_UTE_PER_IO -+extern void complete_xiso_ep(dwc_otg_pcd_ep_t * ep); -+#endif -+//#define PRINT_CFI_DMA_DESCS -+ -+#define DEBUG_EP0 -+ -+/** -+ * This function updates OTG. -+ */ -+static void dwc_otg_pcd_update_otg(dwc_otg_pcd_t * pcd, const unsigned reset) -+{ -+ -+ if (reset) { -+ pcd->b_hnp_enable = 0; -+ pcd->a_hnp_support = 0; -+ pcd->a_alt_hnp_support = 0; -+ } -+ -+ if (pcd->fops->hnp_changed) { -+ pcd->fops->hnp_changed(pcd); -+ } -+} -+ -+/** @file -+ * This file contains the implementation of the PCD Interrupt handlers. -+ * -+ * The PCD handles the device interrupts. Many conditions can cause a -+ * device interrupt. When an interrupt occurs, the device interrupt -+ * service routine determines the cause of the interrupt and -+ * dispatches handling to the appropriate function. These interrupt -+ * handling functions are described below. -+ * All interrupt registers are processed from LSB to MSB. -+ */ -+ -+/** -+ * This function prints the ep0 state for debug purposes. -+ */ -+static inline void print_ep0_state(dwc_otg_pcd_t * pcd) -+{ -+#ifdef DEBUG -+ char str[40]; -+ -+ switch (pcd->ep0state) { -+ case EP0_DISCONNECT: -+ dwc_strcpy(str, "EP0_DISCONNECT"); -+ break; -+ case EP0_IDLE: -+ dwc_strcpy(str, "EP0_IDLE"); -+ break; -+ case EP0_IN_DATA_PHASE: -+ dwc_strcpy(str, "EP0_IN_DATA_PHASE"); -+ break; -+ case EP0_OUT_DATA_PHASE: -+ dwc_strcpy(str, "EP0_OUT_DATA_PHASE"); -+ break; -+ case EP0_IN_STATUS_PHASE: -+ dwc_strcpy(str, "EP0_IN_STATUS_PHASE"); -+ break; -+ case EP0_OUT_STATUS_PHASE: -+ dwc_strcpy(str, "EP0_OUT_STATUS_PHASE"); -+ break; -+ case EP0_STALL: -+ dwc_strcpy(str, "EP0_STALL"); -+ break; -+ default: -+ dwc_strcpy(str, "EP0_INVALID"); -+ } -+ -+ DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state); -+#endif -+} -+ -+/** -+ * This function calculate the size of the payload in the memory -+ * for out endpoints and prints size for debug purposes(used in -+ * 2.93a DevOutNak feature). -+ */ -+static inline void print_memory_payload(dwc_otg_pcd_t * pcd, dwc_ep_t * ep) -+{ -+#ifdef DEBUG -+ deptsiz_data_t deptsiz_init = {.d32 = 0 }; -+ deptsiz_data_t deptsiz_updt = {.d32 = 0 }; -+ int pack_num; -+ unsigned payload; -+ -+ deptsiz_init.d32 = pcd->core_if->start_doeptsiz_val[ep->num]; -+ deptsiz_updt.d32 = -+ DWC_READ_REG32(&pcd->core_if->dev_if-> -+ out_ep_regs[ep->num]->doeptsiz); -+ /* Payload will be */ -+ payload = deptsiz_init.b.xfersize - deptsiz_updt.b.xfersize; -+ /* Packet count is decremented every time a packet -+ * is written to the RxFIFO not in to the external memory -+ * So, if payload == 0, then it means no packet was sent to ext memory*/ -+ pack_num = (!payload) ? 0 : (deptsiz_init.b.pktcnt - deptsiz_updt.b.pktcnt); -+ DWC_DEBUGPL(DBG_PCDV, -+ "Payload for EP%d-%s\n", -+ ep->num, (ep->is_in ? "IN" : "OUT")); -+ DWC_DEBUGPL(DBG_PCDV, -+ "Number of transfered bytes = 0x%08x\n", payload); -+ DWC_DEBUGPL(DBG_PCDV, -+ "Number of transfered packets = %d\n", pack_num); -+#endif -+} -+ -+ -+#ifdef DWC_UTE_CFI -+static inline void print_desc(struct dwc_otg_dma_desc *ddesc, -+ const uint8_t * epname, int descnum) -+{ -+ CFI_INFO -+ ("%s DMA_DESC(%d) buf=0x%08x bytes=0x%04x; sp=0x%x; l=0x%x; sts=0x%02x; bs=0x%02x\n", -+ epname, descnum, ddesc->buf, ddesc->status.b.bytes, -+ ddesc->status.b.sp, ddesc->status.b.l, ddesc->status.b.sts, -+ ddesc->status.b.bs); -+} -+#endif -+ -+/** -+ * This function returns pointer to in ep struct with number ep_num -+ */ -+static inline dwc_otg_pcd_ep_t *get_in_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num) -+{ -+ int i; -+ int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps; -+ if (ep_num == 0) { -+ return &pcd->ep0; -+ } else { -+ for (i = 0; i < num_in_eps; ++i) { -+ if (pcd->in_ep[i].dwc_ep.num == ep_num) -+ return &pcd->in_ep[i]; -+ } -+ return 0; -+ } -+} -+ -+/** -+ * This function returns pointer to out ep struct with number ep_num -+ */ -+static inline dwc_otg_pcd_ep_t *get_out_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num) -+{ -+ int i; -+ int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps; -+ if (ep_num == 0) { -+ return &pcd->ep0; -+ } else { -+ for (i = 0; i < num_out_eps; ++i) { -+ if (pcd->out_ep[i].dwc_ep.num == ep_num) -+ return &pcd->out_ep[i]; -+ } -+ return 0; -+ } -+} -+ -+/** -+ * This functions gets a pointer to an EP from the wIndex address -+ * value of the control request. -+ */ -+dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ uint32_t ep_num = UE_GET_ADDR(wIndex); -+ -+ if (ep_num == 0) { -+ ep = &pcd->ep0; -+ } else if (UE_GET_DIR(wIndex) == UE_DIR_IN) { /* in ep */ -+ ep = &pcd->in_ep[ep_num - 1]; -+ } else { -+ ep = &pcd->out_ep[ep_num - 1]; -+ } -+ -+ return ep; -+} -+ -+/** -+ * This function checks the EP request queue, if the queue is not -+ * empty the next request is started. -+ */ -+void start_next_request(dwc_otg_pcd_ep_t * ep) -+{ -+ dwc_otg_pcd_request_t *req = 0; -+ uint32_t max_transfer = -+ GET_CORE_IF(ep->pcd)->core_params->max_transfer_size; -+ -+#ifdef DWC_UTE_CFI -+ struct dwc_otg_pcd *pcd; -+ pcd = ep->pcd; -+#endif -+ -+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ -+#ifdef DWC_UTE_CFI -+ if (ep->dwc_ep.buff_mode != BM_STANDARD) { -+ ep->dwc_ep.cfi_req_len = req->length; -+ pcd->cfi->ops.build_descriptors(pcd->cfi, pcd, ep, req); -+ } else { -+#endif -+ /* Setup and start the Transfer */ -+ if (req->dw_align_buf) { -+ ep->dwc_ep.dma_addr = req->dw_align_buf_dma; -+ ep->dwc_ep.start_xfer_buff = req->dw_align_buf; -+ ep->dwc_ep.xfer_buff = req->dw_align_buf; -+ } else { -+ ep->dwc_ep.dma_addr = req->dma; -+ ep->dwc_ep.start_xfer_buff = req->buf; -+ ep->dwc_ep.xfer_buff = req->buf; -+ } -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = req->length; -+ ep->dwc_ep.xfer_len = 0; -+ ep->dwc_ep.xfer_count = 0; -+ -+ ep->dwc_ep.maxxfer = max_transfer; -+ if (GET_CORE_IF(ep->pcd)->dma_desc_enable) { -+ uint32_t out_max_xfer = DDMA_MAX_TRANSFER_SIZE -+ - (DDMA_MAX_TRANSFER_SIZE % 4); -+ if (ep->dwc_ep.is_in) { -+ if (ep->dwc_ep.maxxfer > -+ DDMA_MAX_TRANSFER_SIZE) { -+ ep->dwc_ep.maxxfer = -+ DDMA_MAX_TRANSFER_SIZE; -+ } -+ } else { -+ if (ep->dwc_ep.maxxfer > out_max_xfer) { -+ ep->dwc_ep.maxxfer = -+ out_max_xfer; -+ } -+ } -+ } -+ if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) { -+ ep->dwc_ep.maxxfer -= -+ (ep->dwc_ep.maxxfer % ep->dwc_ep.maxpacket); -+ } -+ if (req->sent_zlp) { -+ if ((ep->dwc_ep.total_len % -+ ep->dwc_ep.maxpacket == 0) -+ && (ep->dwc_ep.total_len != 0)) { -+ ep->dwc_ep.sent_zlp = 1; -+ } -+ -+ } -+#ifdef DWC_UTE_CFI -+ } -+#endif -+ dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep); -+ } else if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { -+ DWC_PRINTF("There are no more ISOC requests \n"); -+ ep->dwc_ep.frame_num = 0xFFFFFFFF; -+ } -+} -+ -+/** -+ * This function handles the SOF Interrupts. At this time the SOF -+ * Interrupt is disabled. -+ */ -+int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ -+ gintsts_data_t gintsts; -+ -+ DWC_DEBUGPL(DBG_PCD, "SOF\n"); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.sofintr = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * This function handles the Rx Status Queue Level Interrupt, which -+ * indicates that there is a least one packet in the Rx FIFO. The -+ * packets are moved from the FIFO to memory, where they will be -+ * processed when the Endpoint Interrupt Register indicates Transfer -+ * Complete or SETUP Phase Done. -+ * -+ * Repeat the following until the Rx Status Queue is empty: -+ * -# Read the Receive Status Pop Register (GRXSTSP) to get Packet -+ * info -+ * -# If Receive FIFO is empty then skip to step Clear the interrupt -+ * and exit -+ * -# If SETUP Packet call dwc_otg_read_setup_packet to copy the -+ * SETUP data to the buffer -+ * -# If OUT Data Packet call dwc_otg_read_packet to copy the data -+ * to the destination buffer -+ */ -+int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ gintmsk_data_t gintmask = {.d32 = 0 }; -+ device_grxsts_data_t status; -+ dwc_otg_pcd_ep_t *ep; -+ gintsts_data_t gintsts; -+#ifdef DEBUG -+ static char *dpid_str[] = { "D0", "D2", "D1", "MDATA" }; -+#endif -+ -+ //DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd); -+ /* Disable the Rx Status Queue Level interrupt */ -+ gintmask.b.rxstsqlvl = 1; -+ DWC_MODIFY_REG32(&global_regs->gintmsk, gintmask.d32, 0); -+ -+ /* Get the Status from the top of the FIFO */ -+ status.d32 = DWC_READ_REG32(&global_regs->grxstsp); -+ -+ DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s " -+ "pktsts:%x Frame:%d(0x%0x)\n", -+ status.b.epnum, status.b.bcnt, -+ dpid_str[status.b.dpid], -+ status.b.pktsts, status.b.fn, status.b.fn); -+ /* Get pointer to EP structure */ -+ ep = get_out_ep(pcd, status.b.epnum); -+ -+ switch (status.b.pktsts) { -+ case DWC_DSTS_GOUT_NAK: -+ DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n"); -+ break; -+ case DWC_STS_DATA_UPDT: -+ DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n"); -+ if (status.b.bcnt && ep->dwc_ep.xfer_buff) { -+ /** @todo NGS Check for buffer overflow? */ -+ dwc_otg_read_packet(core_if, -+ ep->dwc_ep.xfer_buff, -+ status.b.bcnt); -+ ep->dwc_ep.xfer_count += status.b.bcnt; -+ ep->dwc_ep.xfer_buff += status.b.bcnt; -+ } -+ break; -+ case DWC_STS_XFER_COMP: -+ DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n"); -+ break; -+ case DWC_DSTS_SETUP_COMP: -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n"); -+#endif -+ break; -+ case DWC_DSTS_SETUP_UPDT: -+ dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32); -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCD, -+ "SETUP PKT: %02x.%02x v%04x i%04x l%04x\n", -+ pcd->setup_pkt->req.bmRequestType, -+ pcd->setup_pkt->req.bRequest, -+ UGETW(pcd->setup_pkt->req.wValue), -+ UGETW(pcd->setup_pkt->req.wIndex), -+ UGETW(pcd->setup_pkt->req.wLength)); -+#endif -+ ep->dwc_ep.xfer_count += status.b.bcnt; -+ break; -+ default: -+ DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n", -+ status.b.pktsts); -+ break; -+ } -+ -+ /* Enable the Rx Status Queue Level interrupt */ -+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmask.d32); -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.rxstsqlvl = 1; -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ //DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__); -+ return 1; -+} -+ -+/** -+ * This function examines the Device IN Token Learning Queue to -+ * determine the EP number of the last IN token received. This -+ * implementation is for the Mass Storage device where there are only -+ * 2 IN EPs (Control-IN and BULK-IN). -+ * -+ * The EP numbers for the first six IN Tokens are in DTKNQR1 and there -+ * are 8 EP Numbers in each of the other possible DTKNQ Registers. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * -+ */ -+static inline int get_ep_of_last_in_token(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_device_global_regs_t *dev_global_regs = -+ core_if->dev_if->dev_global_regs; -+ const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth; -+ /* Number of Token Queue Registers */ -+ const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8; -+ dtknq1_data_t dtknqr1; -+ uint32_t in_tkn_epnums[4]; -+ int ndx = 0; -+ int i = 0; -+ volatile uint32_t *addr = &dev_global_regs->dtknqr1; -+ int epnum = 0; -+ -+ //DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH); -+ -+ /* Read the DTKNQ Registers */ -+ for (i = 0; i < DTKNQ_REG_CNT; i++) { -+ in_tkn_epnums[i] = DWC_READ_REG32(addr); -+ DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1, -+ in_tkn_epnums[i]); -+ if (addr == &dev_global_regs->dvbusdis) { -+ addr = &dev_global_regs->dtknqr3_dthrctl; -+ } else { -+ ++addr; -+ } -+ -+ } -+ -+ /* Copy the DTKNQR1 data to the bit field. */ -+ dtknqr1.d32 = in_tkn_epnums[0]; -+ /* Get the EP numbers */ -+ in_tkn_epnums[0] = dtknqr1.b.epnums0_5; -+ ndx = dtknqr1.b.intknwptr - 1; -+ -+ //DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx); -+ if (ndx == -1) { -+ /** @todo Find a simpler way to calculate the max -+ * queue position.*/ -+ int cnt = TOKEN_Q_DEPTH; -+ if (TOKEN_Q_DEPTH <= 6) { -+ cnt = TOKEN_Q_DEPTH - 1; -+ } else if (TOKEN_Q_DEPTH <= 14) { -+ cnt = TOKEN_Q_DEPTH - 7; -+ } else if (TOKEN_Q_DEPTH <= 22) { -+ cnt = TOKEN_Q_DEPTH - 15; -+ } else { -+ cnt = TOKEN_Q_DEPTH - 23; -+ } -+ epnum = (in_tkn_epnums[DTKNQ_REG_CNT - 1] >> (cnt * 4)) & 0xF; -+ } else { -+ if (ndx <= 5) { -+ epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF; -+ } else if (ndx <= 13) { -+ ndx -= 6; -+ epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF; -+ } else if (ndx <= 21) { -+ ndx -= 14; -+ epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF; -+ } else if (ndx <= 29) { -+ ndx -= 22; -+ epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF; -+ } -+ } -+ //DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum); -+ return epnum; -+} -+ -+/** -+ * This interrupt occurs when the non-periodic Tx FIFO is half-empty. -+ * The active request is checked for the next packet to be loaded into -+ * the non-periodic Tx FIFO. -+ */ -+int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ dwc_otg_dev_in_ep_regs_t *ep_regs; -+ gnptxsts_data_t txstatus = {.d32 = 0 }; -+ gintsts_data_t gintsts; -+ -+ int epnum = 0; -+ dwc_otg_pcd_ep_t *ep = 0; -+ uint32_t len = 0; -+ int dwords; -+ -+ /* Get the epnum from the IN Token Learning Queue. */ -+ epnum = get_ep_of_last_in_token(core_if); -+ ep = get_in_ep(pcd, epnum); -+ -+ DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %d \n", epnum); -+ -+ ep_regs = core_if->dev_if->in_ep_regs[epnum]; -+ -+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; -+ if (len > ep->dwc_ep.maxpacket) { -+ len = ep->dwc_ep.maxpacket; -+ } -+ dwords = (len + 3) / 4; -+ -+ /* While there is space in the queue and space in the FIFO and -+ * More data to tranfer, Write packets to the Tx FIFO */ -+ txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts); -+ DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n", txstatus.d32); -+ -+ while (txstatus.b.nptxqspcavail > 0 && -+ txstatus.b.nptxfspcavail > dwords && -+ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) { -+ /* Write the FIFO */ -+ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0); -+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; -+ -+ if (len > ep->dwc_ep.maxpacket) { -+ len = ep->dwc_ep.maxpacket; -+ } -+ -+ dwords = (len + 3) / 4; -+ txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts); -+ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", txstatus.d32); -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", -+ DWC_READ_REG32(&global_regs->gnptxsts)); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.nptxfempty = 1; -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * This function is called when dedicated Tx FIFO Empty interrupt occurs. -+ * The active request is checked for the next packet to be loaded into -+ * apropriate Tx FIFO. -+ */ -+static int32_t write_empty_tx_fifo(dwc_otg_pcd_t * pcd, uint32_t epnum) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ dwc_otg_dev_in_ep_regs_t *ep_regs; -+ dtxfsts_data_t txstatus = {.d32 = 0 }; -+ dwc_otg_pcd_ep_t *ep = 0; -+ uint32_t len = 0; -+ int dwords; -+ -+ ep = get_in_ep(pcd, epnum); -+ -+ DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum); -+ -+ ep_regs = core_if->dev_if->in_ep_regs[epnum]; -+ -+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; -+ -+ if (len > ep->dwc_ep.maxpacket) { -+ len = ep->dwc_ep.maxpacket; -+ } -+ -+ dwords = (len + 3) / 4; -+ -+ /* While there is space in the queue and space in the FIFO and -+ * More data to tranfer, Write packets to the Tx FIFO */ -+ txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); -+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32); -+ -+ while (txstatus.b.txfspcavail > dwords && -+ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len && -+ ep->dwc_ep.xfer_len != 0) { -+ /* Write the FIFO */ -+ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0); -+ -+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; -+ if (len > ep->dwc_ep.maxpacket) { -+ len = ep->dwc_ep.maxpacket; -+ } -+ -+ dwords = (len + 3) / 4; -+ txstatus.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); -+ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum, -+ txstatus.d32); -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, -+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts)); -+ -+ return 1; -+} -+ -+/** -+ * This function is called when the Device is disconnected. It stops -+ * any active requests and informs the Gadget driver of the -+ * disconnect. -+ */ -+void dwc_otg_pcd_stop(dwc_otg_pcd_t * pcd) -+{ -+ int i, num_in_eps, num_out_eps; -+ dwc_otg_pcd_ep_t *ep; -+ -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_SPINLOCK(pcd->lock); -+ -+ num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps; -+ num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__); -+ /* don't disconnect drivers more than once */ -+ if (pcd->ep0state == EP0_DISCONNECT) { -+ DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__); -+ DWC_SPINUNLOCK(pcd->lock); -+ return; -+ } -+ pcd->ep0state = EP0_DISCONNECT; -+ -+ /* Reset the OTG state. */ -+ dwc_otg_pcd_update_otg(pcd, 1); -+ -+ /* Disable the NP Tx Fifo Empty Interrupt. */ -+ intr_mask.b.nptxfempty = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, -+ intr_mask.d32, 0); -+ -+ /* Flush the FIFOs */ -+ /**@todo NGS Flush Periodic FIFOs */ -+ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10); -+ dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd)); -+ -+ /* prevent new request submissions, kill any outstanding requests */ -+ ep = &pcd->ep0; -+ dwc_otg_request_nuke(ep); -+ /* prevent new request submissions, kill any outstanding requests */ -+ for (i = 0; i < num_in_eps; i++) { -+ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i]; -+ dwc_otg_request_nuke(ep); -+ } -+ /* prevent new request submissions, kill any outstanding requests */ -+ for (i = 0; i < num_out_eps; i++) { -+ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i]; -+ dwc_otg_request_nuke(ep); -+ } -+ -+ /* report disconnect; the driver is already quiesced */ -+ if (pcd->fops->disconnect) { -+ DWC_SPINUNLOCK(pcd->lock); -+ pcd->fops->disconnect(pcd); -+ DWC_SPINLOCK(pcd->lock); -+ } -+ DWC_SPINUNLOCK(pcd->lock); -+} -+ -+/** -+ * This interrupt indicates that ... -+ */ -+int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t * pcd) -+{ -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ gintsts_data_t gintsts; -+ -+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "i2cintr"); -+ intr_mask.b.i2cintr = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, -+ intr_mask.d32, 0); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.i2cintr = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that ... -+ */ -+int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t * pcd) -+{ -+ gintsts_data_t gintsts; -+#if defined(VERBOSE) -+ DWC_PRINTF("Early Suspend Detected\n"); -+#endif -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.erlysuspend = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ return 1; -+} -+ -+/** -+ * This function configures EPO to receive SETUP packets. -+ * -+ * @todo NGS: Update the comments from the HW FS. -+ * -+ * -# Program the following fields in the endpoint specific registers -+ * for Control OUT EP 0, in order to receive a setup packet -+ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back -+ * setup packets) -+ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back -+ * to back setup packets) -+ * - In DMA mode, DOEPDMA0 Register with a memory address to -+ * store any setup packets received -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param pcd Programming view of the PCD. -+ */ -+static inline void ep0_out_start(dwc_otg_core_if_t * core_if, -+ dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ deptsiz0_data_t doeptsize0 = {.d32 = 0 }; -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ depctl_data_t doepctl = {.d32 = 0 }; -+ -+#ifdef VERBOSE -+ DWC_DEBUGPL(DBG_PCDV, "%s() doepctl0=%0x\n", __func__, -+ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl)); -+#endif -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { -+ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl); -+ if (doepctl.b.epena) { -+ return; -+ } -+ } -+ -+ doeptsize0.b.supcnt = 3; -+ doeptsize0.b.pktcnt = 1; -+ doeptsize0.b.xfersize = 8 * 3; -+ -+ if (core_if->dma_enable) { -+ if (!core_if->dma_desc_enable) { -+ /** put here as for Hermes mode deptisz register should not be written */ -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz, -+ doeptsize0.d32); -+ -+ /** @todo dma needs to handle multiple setup packets (up to 3) */ -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma, -+ pcd->setup_pkt_dma_handle); -+ } else { -+ dev_if->setup_desc_index = -+ (dev_if->setup_desc_index + 1) & 1; -+ dma_desc = -+ dev_if->setup_desc_addr[dev_if->setup_desc_index]; -+ -+ /** DMA Descriptor Setup */ -+ dma_desc->status.b.bs = BS_HOST_BUSY; -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { -+ dma_desc->status.b.sr = 0; -+ dma_desc->status.b.mtrf = 0; -+ } -+ dma_desc->status.b.l = 1; -+ dma_desc->status.b.ioc = 1; -+ dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket; -+ dma_desc->buf = pcd->setup_pkt_dma_handle; -+ dma_desc->status.b.sts = 0; -+ dma_desc->status.b.bs = BS_HOST_READY; -+ -+ /** DOEPDMA0 Register write */ -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma, -+ dev_if->dma_setup_desc_addr -+ [dev_if->setup_desc_index]); -+ } -+ -+ } else { -+ /** put here as for Hermes mode deptisz register should not be written */ -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz, -+ doeptsize0.d32); -+ } -+ -+ /** DOEPCTL0 Register write cnak will be set after setup interrupt */ -+ doepctl.d32 = 0; -+ doepctl.b.epena = 1; -+ if (core_if->snpsid <= OTG_CORE_REV_2_94a) { -+ doepctl.b.cnak = 1; -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); -+ } else { -+ DWC_MODIFY_REG32(&dev_if->out_ep_regs[0]->doepctl, 0, doepctl.d32); -+ } -+ -+#ifdef VERBOSE -+ DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n", -+ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl)); -+ DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n", -+ DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl)); -+#endif -+} -+ -+/** -+ * This interrupt occurs when a USB Reset is detected. When the USB -+ * Reset Interrupt occurs the device state is set to DEFAULT and the -+ * EP0 state is set to IDLE. -+ * -# Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1) -+ * -# Unmask the following interrupt bits -+ * - DAINTMSK.INEP0 = 1 (Control 0 IN endpoint) -+ * - DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint) -+ * - DOEPMSK.SETUP = 1 -+ * - DOEPMSK.XferCompl = 1 -+ * - DIEPMSK.XferCompl = 1 -+ * - DIEPMSK.TimeOut = 1 -+ * -# Program the following fields in the endpoint specific registers -+ * for Control OUT EP 0, in order to receive a setup packet -+ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back -+ * setup packets) -+ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back -+ * to back setup packets) -+ * - In DMA mode, DOEPDMA0 Register with a memory address to -+ * store any setup packets received -+ * At this point, all the required initialization, except for enabling -+ * the control 0 OUT endpoint is done, for receiving SETUP packets. -+ */ -+int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ depctl_data_t doepctl = {.d32 = 0 }; -+ depctl_data_t diepctl = {.d32 = 0 }; -+ daint_data_t daintmsk = {.d32 = 0 }; -+ doepmsk_data_t doepmsk = {.d32 = 0 }; -+ diepmsk_data_t diepmsk = {.d32 = 0 }; -+ dcfg_data_t dcfg = {.d32 = 0 }; -+ grstctl_t resetctl = {.d32 = 0 }; -+ dctl_data_t dctl = {.d32 = 0 }; -+ int i = 0; -+ gintsts_data_t gintsts; -+ pcgcctl_data_t power = {.d32 = 0 }; -+ -+ power.d32 = DWC_READ_REG32(core_if->pcgcctl); -+ if (power.b.stoppclk) { -+ power.d32 = 0; -+ power.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0); -+ -+ power.b.pwrclmp = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0); -+ -+ power.b.rstpdwnmodule = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0); -+ } -+ -+ core_if->lx_state = DWC_OTG_L0; -+ -+ DWC_PRINTF("USB RESET\n"); -+#ifdef DWC_EN_ISOC -+ for (i = 1; i < 16; ++i) { -+ dwc_otg_pcd_ep_t *ep; -+ dwc_ep_t *dwc_ep; -+ ep = get_in_ep(pcd, i); -+ if (ep != 0) { -+ dwc_ep = &ep->dwc_ep; -+ dwc_ep->next_frame = 0xffffffff; -+ } -+ } -+#endif /* DWC_EN_ISOC */ -+ -+ /* reset the HNP settings */ -+ dwc_otg_pcd_update_otg(pcd, 1); -+ -+ /* Clear the Remote Wakeup Signalling */ -+ dctl.b.rmtwkupsig = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0); -+ -+ /* Set NAK for all OUT EPs */ -+ doepctl.b.snak = 1; -+ for (i = 0; i <= dev_if->num_out_eps; i++) { -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32); -+ } -+ -+ /* Flush the NP Tx FIFO */ -+ dwc_otg_flush_tx_fifo(core_if, 0x10); -+ /* Flush the Learning Queue */ -+ resetctl.b.intknqflsh = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32); -+ -+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) { -+ core_if->start_predict = 0; -+ for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) { -+ core_if->nextep_seq[i] = 0xff; // 0xff - EP not active -+ } -+ core_if->nextep_seq[0] = 0; -+ core_if->first_in_nextep_seq = 0; -+ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl); -+ diepctl.b.nextep = 0; -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); -+ -+ /* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */ -+ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); -+ dcfg.b.epmscnt = 2; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", -+ __func__, core_if->first_in_nextep_seq); -+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { -+ DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]); -+ } -+ } -+ -+ if (core_if->multiproc_int_enable) { -+ daintmsk.b.inep0 = 1; -+ daintmsk.b.outep0 = 1; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk, -+ daintmsk.d32); -+ -+ doepmsk.b.setup = 1; -+ doepmsk.b.xfercompl = 1; -+ doepmsk.b.ahberr = 1; -+ doepmsk.b.epdisabled = 1; -+ -+ if ((core_if->dma_desc_enable) || -+ (core_if->dma_enable -+ && core_if->snpsid >= OTG_CORE_REV_3_00a)) { -+ doepmsk.b.stsphsercvd = 1; -+ } -+ if (core_if->dma_desc_enable) -+ doepmsk.b.bna = 1; -+/* -+ doepmsk.b.babble = 1; -+ doepmsk.b.nyet = 1; -+ -+ if (core_if->dma_enable) { -+ doepmsk.b.nak = 1; -+ } -+*/ -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepeachintmsk[0], -+ doepmsk.d32); -+ -+ diepmsk.b.xfercompl = 1; -+ diepmsk.b.timeout = 1; -+ diepmsk.b.epdisabled = 1; -+ diepmsk.b.ahberr = 1; -+ diepmsk.b.intknepmis = 1; -+ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) -+ diepmsk.b.intknepmis = 0; -+ -+/* if (core_if->dma_desc_enable) { -+ diepmsk.b.bna = 1; -+ } -+*/ -+/* -+ if (core_if->dma_enable) { -+ diepmsk.b.nak = 1; -+ } -+*/ -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepeachintmsk[0], -+ diepmsk.d32); -+ } else { -+ daintmsk.b.inep0 = 1; -+ daintmsk.b.outep0 = 1; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk, -+ daintmsk.d32); -+ -+ doepmsk.b.setup = 1; -+ doepmsk.b.xfercompl = 1; -+ doepmsk.b.ahberr = 1; -+ doepmsk.b.epdisabled = 1; -+ -+ if ((core_if->dma_desc_enable) || -+ (core_if->dma_enable -+ && core_if->snpsid >= OTG_CORE_REV_3_00a)) { -+ doepmsk.b.stsphsercvd = 1; -+ } -+ if (core_if->dma_desc_enable) -+ doepmsk.b.bna = 1; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32); -+ -+ diepmsk.b.xfercompl = 1; -+ diepmsk.b.timeout = 1; -+ diepmsk.b.epdisabled = 1; -+ diepmsk.b.ahberr = 1; -+ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) -+ diepmsk.b.intknepmis = 0; -+/* -+ if (core_if->dma_desc_enable) { -+ diepmsk.b.bna = 1; -+ } -+*/ -+ -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32); -+ } -+ -+ /* Reset Device Address */ -+ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); -+ dcfg.b.devaddr = 0; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); -+ -+ /* setup EP0 to receive SETUP packets */ -+ if (core_if->snpsid <= OTG_CORE_REV_2_94a) -+ ep0_out_start(core_if, pcd); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.usbreset = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * Get the device speed from the device status register and convert it -+ * to USB speed constant. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static int get_device_speed(dwc_otg_core_if_t * core_if) -+{ -+ dsts_data_t dsts; -+ int speed = 0; -+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ -+ switch (dsts.b.enumspd) { -+ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: -+ speed = USB_SPEED_HIGH; -+ break; -+ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: -+ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: -+ speed = USB_SPEED_FULL; -+ break; -+ -+ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: -+ speed = USB_SPEED_LOW; -+ break; -+ } -+ -+ return speed; -+} -+ -+/** -+ * Read the device status register and set the device speed in the -+ * data structure. -+ * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate. -+ */ -+int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; -+ gintsts_data_t gintsts; -+ gusbcfg_data_t gusbcfg; -+ dwc_otg_core_global_regs_t *global_regs = -+ GET_CORE_IF(pcd)->core_global_regs; -+ uint8_t utmi16b, utmi8b; -+ int speed; -+ DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n"); -+ -+ if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_2_60a) { -+ utmi16b = 6; //vahrama old value was 6; -+ utmi8b = 9; -+ } else { -+ utmi16b = 4; -+ utmi8b = 8; -+ } -+ dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep); -+ if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a) { -+ ep0_out_start(GET_CORE_IF(pcd), pcd); -+ } -+ -+#ifdef DEBUG_EP0 -+ print_ep0_state(pcd); -+#endif -+ -+ if (pcd->ep0state == EP0_DISCONNECT) { -+ pcd->ep0state = EP0_IDLE; -+ } else if (pcd->ep0state == EP0_STALL) { -+ pcd->ep0state = EP0_IDLE; -+ } -+ -+ pcd->ep0state = EP0_IDLE; -+ -+ ep0->stopped = 0; -+ -+ speed = get_device_speed(GET_CORE_IF(pcd)); -+ pcd->fops->connect(pcd, speed); -+ -+ /* Set USB turnaround time based on device speed and PHY interface. */ -+ gusbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); -+ if (speed == USB_SPEED_HIGH) { -+ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == -+ DWC_HWCFG2_HS_PHY_TYPE_ULPI) { -+ /* ULPI interface */ -+ gusbcfg.b.usbtrdtim = 9; -+ } -+ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == -+ DWC_HWCFG2_HS_PHY_TYPE_UTMI) { -+ /* UTMI+ interface */ -+ if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) { -+ gusbcfg.b.usbtrdtim = utmi8b; -+ } else if (GET_CORE_IF(pcd)->hwcfg4. -+ b.utmi_phy_data_width == 1) { -+ gusbcfg.b.usbtrdtim = utmi16b; -+ } else if (GET_CORE_IF(pcd)-> -+ core_params->phy_utmi_width == 8) { -+ gusbcfg.b.usbtrdtim = utmi8b; -+ } else { -+ gusbcfg.b.usbtrdtim = utmi16b; -+ } -+ } -+ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == -+ DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) { -+ /* UTMI+ OR ULPI interface */ -+ if (gusbcfg.b.ulpi_utmi_sel == 1) { -+ /* ULPI interface */ -+ gusbcfg.b.usbtrdtim = 9; -+ } else { -+ /* UTMI+ interface */ -+ if (GET_CORE_IF(pcd)-> -+ core_params->phy_utmi_width == 16) { -+ gusbcfg.b.usbtrdtim = utmi16b; -+ } else { -+ gusbcfg.b.usbtrdtim = utmi8b; -+ } -+ } -+ } -+ } else { -+ /* Full or low speed */ -+ gusbcfg.b.usbtrdtim = 9; -+ } -+ DWC_WRITE_REG32(&global_regs->gusbcfg, gusbcfg.d32); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.enumdone = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that the ISO OUT Packet was dropped due to -+ * Rx FIFO full or Rx Status Queue Full. If this interrupt occurs -+ * read all the data from the Rx FIFO. -+ */ -+int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t * pcd) -+{ -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ gintsts_data_t gintsts; -+ -+ DWC_WARN("INTERRUPT Handler not implemented for %s\n", -+ "ISOC Out Dropped"); -+ -+ intr_mask.b.isooutdrop = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, -+ intr_mask.d32, 0); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.isooutdrop = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * This interrupt indicates the end of the portion of the micro-frame -+ * for periodic transactions. If there is a periodic transaction for -+ * the next frame, load the packets into the EP periodic Tx FIFO. -+ */ -+int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t * pcd) -+{ -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ gintsts_data_t gintsts; -+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "EOP"); -+ -+ intr_mask.b.eopframe = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, -+ intr_mask.d32, 0); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.eopframe = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that EP of the packet on the top of the -+ * non-periodic Tx FIFO does not match EP of the IN Token received. -+ * -+ * The "Device IN Token Queue" Registers are read to determine the -+ * order the IN Tokens have been received. The non-periodic Tx FIFO -+ * is flushed, so it can be reloaded in the order seen in the IN Token -+ * Queue. -+ */ -+int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_pcd_t * pcd) -+{ -+ gintsts_data_t gintsts; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dctl_data_t dctl; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) { -+ core_if->start_predict = 1; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if); -+ -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ if (!gintsts.b.ginnakeff) { -+ /* Disable EP Mismatch interrupt */ -+ intr_mask.d32 = 0; -+ intr_mask.b.epmismatch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0); -+ /* Enable the Global IN NAK Effective Interrupt */ -+ intr_mask.d32 = 0; -+ intr_mask.b.ginnakeff = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32); -+ /* Set the global non-periodic IN NAK handshake */ -+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); -+ dctl.b.sgnpinnak = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); -+ } else { -+ DWC_PRINTF("gintsts.b.ginnakeff = 1! dctl.b.sgnpinnak not set\n"); -+ } -+ /* Disabling of all EP's will be done in dwc_otg_pcd_handle_in_nak_effective() -+ * handler after Global IN NAK Effective interrupt will be asserted */ -+ } -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.epmismatch = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * This interrupt is valid only in DMA mode. This interrupt indicates that the -+ * core has stopped fetching data for IN endpoints due to the unavailability of -+ * TxFIFO space or Request Queue space. This interrupt is used by the -+ * application for an endpoint mismatch algorithm. -+ * -+ * @param pcd The PCD -+ */ -+int32_t dwc_otg_pcd_handle_ep_fetsusp_intr(dwc_otg_pcd_t * pcd) -+{ -+ gintsts_data_t gintsts; -+ gintmsk_data_t gintmsk_data; -+ dctl_data_t dctl; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if); -+ -+ /* Clear the global non-periodic IN NAK handshake */ -+ dctl.d32 = 0; -+ dctl.b.cgnpinnak = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); -+ -+ /* Mask GINTSTS.FETSUSP interrupt */ -+ gintmsk_data.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); -+ gintmsk_data.b.fetsusp = 0; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk_data.d32); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.fetsusp = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+/** -+ * This funcion stalls EP0. -+ */ -+static inline void ep0_do_stall(dwc_otg_pcd_t * pcd, const int err_val) -+{ -+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; -+ usb_device_request_t *ctrl = &pcd->setup_pkt->req; -+ DWC_WARN("req %02x.%02x protocol STALL; err %d\n", -+ ctrl->bmRequestType, ctrl->bRequest, err_val); -+ -+ ep0->dwc_ep.is_in = 1; -+ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep0->dwc_ep); -+ pcd->ep0.stopped = 1; -+ pcd->ep0state = EP0_IDLE; -+ ep0_out_start(GET_CORE_IF(pcd), pcd); -+} -+ -+/** -+ * This functions delegates the setup command to the gadget driver. -+ */ -+static inline void do_gadget_setup(dwc_otg_pcd_t * pcd, -+ usb_device_request_t * ctrl) -+{ -+ int ret = 0; -+ DWC_SPINUNLOCK(pcd->lock); -+ ret = pcd->fops->setup(pcd, (uint8_t *) ctrl); -+ DWC_SPINLOCK(pcd->lock); -+ if (ret < 0) { -+ ep0_do_stall(pcd, ret); -+ } -+ -+ /** @todo This is a g_file_storage gadget driver specific -+ * workaround: a DELAYED_STATUS result from the fsg_setup -+ * routine will result in the gadget queueing a EP0 IN status -+ * phase for a two-stage control transfer. Exactly the same as -+ * a SET_CONFIGURATION/SET_INTERFACE except that this is a class -+ * specific request. Need a generic way to know when the gadget -+ * driver will queue the status phase. Can we assume when we -+ * call the gadget driver setup() function that it will always -+ * queue and require the following flag? Need to look into -+ * this. -+ */ -+ -+ if (ret == 256 + 999) { -+ pcd->request_config = 1; -+ } -+} -+ -+#ifdef DWC_UTE_CFI -+/** -+ * This functions delegates the CFI setup commands to the gadget driver. -+ * This function will return a negative value to indicate a failure. -+ */ -+static inline int cfi_gadget_setup(dwc_otg_pcd_t * pcd, -+ struct cfi_usb_ctrlrequest *ctrl_req) -+{ -+ int ret = 0; -+ -+ if (pcd->fops && pcd->fops->cfi_setup) { -+ DWC_SPINUNLOCK(pcd->lock); -+ ret = pcd->fops->cfi_setup(pcd, ctrl_req); -+ DWC_SPINLOCK(pcd->lock); -+ if (ret < 0) { -+ ep0_do_stall(pcd, ret); -+ return ret; -+ } -+ } -+ -+ return ret; -+} -+#endif -+ -+/** -+ * This function starts the Zero-Length Packet for the IN status phase -+ * of a 2 stage control transfer. -+ */ -+static inline void do_setup_in_status_phase(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; -+ if (pcd->ep0state == EP0_STALL) { -+ return; -+ } -+ -+ pcd->ep0state = EP0_IN_STATUS_PHASE; -+ -+ /* Prepare for more SETUP Packets */ -+ DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n"); -+ if ((GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a) -+ && (pcd->core_if->dma_desc_enable) -+ && (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len)) { -+ DWC_DEBUGPL(DBG_PCDV, -+ "Data terminated wait next packet in out_desc_addr\n"); -+ pcd->backup_buf = phys_to_virt(ep0->dwc_ep.dma_addr); -+ pcd->data_terminated = 1; -+ } -+ ep0->dwc_ep.xfer_len = 0; -+ ep0->dwc_ep.xfer_count = 0; -+ ep0->dwc_ep.is_in = 1; -+ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle; -+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); -+ -+ /* Prepare for more SETUP Packets */ -+ //ep0_out_start(GET_CORE_IF(pcd), pcd); -+} -+ -+/** -+ * This function starts the Zero-Length Packet for the OUT status phase -+ * of a 2 stage control transfer. -+ */ -+static inline void do_setup_out_status_phase(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; -+ if (pcd->ep0state == EP0_STALL) { -+ DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n"); -+ return; -+ } -+ pcd->ep0state = EP0_OUT_STATUS_PHASE; -+ -+ DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n"); -+ ep0->dwc_ep.xfer_len = 0; -+ ep0->dwc_ep.xfer_count = 0; -+ ep0->dwc_ep.is_in = 0; -+ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle; -+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); -+ -+ /* Prepare for more SETUP Packets */ -+ if (GET_CORE_IF(pcd)->dma_enable == 0) { -+ ep0_out_start(GET_CORE_IF(pcd), pcd); -+ } -+} -+ -+/** -+ * Clear the EP halt (STALL) and if pending requests start the -+ * transfer. -+ */ -+static inline void pcd_clear_halt(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep) -+{ -+ if (ep->dwc_ep.stall_clear_flag == 0) -+ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep); -+ -+ /* Reactive the EP */ -+ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); -+ if (ep->stopped) { -+ ep->stopped = 0; -+ /* If there is a request in the EP queue start it */ -+ -+ /** @todo FIXME: this causes an EP mismatch in DMA mode. -+ * epmismatch not yet implemented. */ -+ -+ /* -+ * Above fixme is solved by implmenting a tasklet to call the -+ * start_next_request(), outside of interrupt context at some -+ * time after the current time, after a clear-halt setup packet. -+ * Still need to implement ep mismatch in the future if a gadget -+ * ever uses more than one endpoint at once -+ */ -+ ep->queue_sof = 1; -+ DWC_TASK_SCHEDULE(pcd->start_xfer_tasklet); -+ } -+ /* Start Control Status Phase */ -+ do_setup_in_status_phase(pcd); -+} -+ -+/** -+ * This function is called when the SET_FEATURE TEST_MODE Setup packet -+ * is sent from the host. The Device Control register is written with -+ * the Test Mode bits set to the specified Test Mode. This is done as -+ * a tasklet so that the "Status" phase of the control transfer -+ * completes before transmitting the TEST packets. -+ * -+ * @todo This has not been tested since the tasklet struct was put -+ * into the PCD struct! -+ * -+ */ -+void do_test_mode(void *data) -+{ -+ dctl_data_t dctl; -+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ int test_mode = pcd->test_mode; -+ -+// DWC_WARN("%s() has not been tested since being rewritten!\n", __func__); -+ -+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); -+ switch (test_mode) { -+ case 1: // TEST_J -+ dctl.b.tstctl = 1; -+ break; -+ -+ case 2: // TEST_K -+ dctl.b.tstctl = 2; -+ break; -+ -+ case 3: // TEST_SE0_NAK -+ dctl.b.tstctl = 3; -+ break; -+ -+ case 4: // TEST_PACKET -+ dctl.b.tstctl = 4; -+ break; -+ -+ case 5: // TEST_FORCE_ENABLE -+ dctl.b.tstctl = 5; -+ break; -+ } -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); -+} -+ -+/** -+ * This function process the GET_STATUS Setup Commands. -+ */ -+static inline void do_get_status(dwc_otg_pcd_t * pcd) -+{ -+ usb_device_request_t ctrl = pcd->setup_pkt->req; -+ dwc_otg_pcd_ep_t *ep; -+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; -+ uint16_t *status = pcd->status_buf; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCD, -+ "GET_STATUS %02x.%02x v%04x i%04x l%04x\n", -+ ctrl.bmRequestType, ctrl.bRequest, -+ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), -+ UGETW(ctrl.wLength)); -+#endif -+ -+ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { -+ case UT_DEVICE: -+ if(UGETW(ctrl.wIndex) == 0xF000) { /* OTG Status selector */ -+ DWC_PRINTF("wIndex - %d\n", UGETW(ctrl.wIndex)); -+ DWC_PRINTF("OTG VERSION - %d\n", core_if->otg_ver); -+ DWC_PRINTF("OTG CAP - %d, %d\n", -+ core_if->core_params->otg_cap, -+ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE); -+ if (core_if->otg_ver == 1 -+ && core_if->core_params->otg_cap == -+ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { -+ uint8_t *otgsts = (uint8_t*)pcd->status_buf; -+ *otgsts = (core_if->otg_sts & 0x1); -+ pcd->ep0_pending = 1; -+ ep0->dwc_ep.start_xfer_buff = -+ (uint8_t *) otgsts; -+ ep0->dwc_ep.xfer_buff = (uint8_t *) otgsts; -+ ep0->dwc_ep.dma_addr = -+ pcd->status_buf_dma_handle; -+ ep0->dwc_ep.xfer_len = 1; -+ ep0->dwc_ep.xfer_count = 0; -+ ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len; -+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), -+ &ep0->dwc_ep); -+ return; -+ } else { -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ } -+ break; -+ } else { -+ *status = 0x1; /* Self powered */ -+ *status |= pcd->remote_wakeup_enable << 1; -+ break; -+ } -+ case UT_INTERFACE: -+ *status = 0; -+ break; -+ -+ case UT_ENDPOINT: -+ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); -+ if (ep == 0 || UGETW(ctrl.wLength) > 2) { -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ } -+ /** @todo check for EP stall */ -+ *status = ep->stopped; -+ break; -+ } -+ pcd->ep0_pending = 1; -+ ep0->dwc_ep.start_xfer_buff = (uint8_t *) status; -+ ep0->dwc_ep.xfer_buff = (uint8_t *) status; -+ ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle; -+ ep0->dwc_ep.xfer_len = 2; -+ ep0->dwc_ep.xfer_count = 0; -+ ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len; -+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); -+} -+ -+/** -+ * This function process the SET_FEATURE Setup Commands. -+ */ -+static inline void do_set_feature(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ usb_device_request_t ctrl = pcd->setup_pkt->req; -+ dwc_otg_pcd_ep_t *ep = 0; -+ int32_t otg_cap_param = core_if->core_params->otg_cap; -+ gotgctl_data_t gotgctl = {.d32 = 0 }; -+ -+ DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n", -+ ctrl.bmRequestType, ctrl.bRequest, -+ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), -+ UGETW(ctrl.wLength)); -+ DWC_DEBUGPL(DBG_PCD, "otg_cap=%d\n", otg_cap_param); -+ -+ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { -+ case UT_DEVICE: -+ switch (UGETW(ctrl.wValue)) { -+ case UF_DEVICE_REMOTE_WAKEUP: -+ pcd->remote_wakeup_enable = 1; -+ break; -+ -+ case UF_TEST_MODE: -+ /* Setup the Test Mode tasklet to do the Test -+ * Packet generation after the SETUP Status -+ * phase has completed. */ -+ -+ /** @todo This has not been tested since the -+ * tasklet struct was put into the PCD -+ * struct! */ -+ pcd->test_mode = UGETW(ctrl.wIndex) >> 8; -+ DWC_TASK_SCHEDULE(pcd->test_mode_tasklet); -+ break; -+ -+ case UF_DEVICE_B_HNP_ENABLE: -+ DWC_DEBUGPL(DBG_PCDV, -+ "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n"); -+ -+ /* dev may initiate HNP */ -+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { -+ pcd->b_hnp_enable = 1; -+ dwc_otg_pcd_update_otg(pcd, 0); -+ DWC_DEBUGPL(DBG_PCD, "Request B HNP\n"); -+ /**@todo Is the gotgctl.devhnpen cleared -+ * by a USB Reset? */ -+ gotgctl.b.devhnpen = 1; -+ gotgctl.b.hnpreq = 1; -+ DWC_WRITE_REG32(&global_regs->gotgctl, -+ gotgctl.d32); -+ } else { -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ } -+ break; -+ -+ case UF_DEVICE_A_HNP_SUPPORT: -+ /* RH port supports HNP */ -+ DWC_DEBUGPL(DBG_PCDV, -+ "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n"); -+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { -+ pcd->a_hnp_support = 1; -+ dwc_otg_pcd_update_otg(pcd, 0); -+ } else { -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ } -+ break; -+ -+ case UF_DEVICE_A_ALT_HNP_SUPPORT: -+ /* other RH port does */ -+ DWC_DEBUGPL(DBG_PCDV, -+ "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n"); -+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { -+ pcd->a_alt_hnp_support = 1; -+ dwc_otg_pcd_update_otg(pcd, 0); -+ } else { -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ } -+ break; -+ -+ default: -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ -+ } -+ do_setup_in_status_phase(pcd); -+ break; -+ -+ case UT_INTERFACE: -+ do_gadget_setup(pcd, &ctrl); -+ break; -+ -+ case UT_ENDPOINT: -+ if (UGETW(ctrl.wValue) == UF_ENDPOINT_HALT) { -+ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); -+ if (ep == 0) { -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ } -+ ep->stopped = 1; -+ dwc_otg_ep_set_stall(core_if, &ep->dwc_ep); -+ } -+ do_setup_in_status_phase(pcd); -+ break; -+ } -+} -+ -+/** -+ * This function process the CLEAR_FEATURE Setup Commands. -+ */ -+static inline void do_clear_feature(dwc_otg_pcd_t * pcd) -+{ -+ usb_device_request_t ctrl = pcd->setup_pkt->req; -+ dwc_otg_pcd_ep_t *ep = 0; -+ -+ DWC_DEBUGPL(DBG_PCD, -+ "CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n", -+ ctrl.bmRequestType, ctrl.bRequest, -+ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), -+ UGETW(ctrl.wLength)); -+ -+ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { -+ case UT_DEVICE: -+ switch (UGETW(ctrl.wValue)) { -+ case UF_DEVICE_REMOTE_WAKEUP: -+ pcd->remote_wakeup_enable = 0; -+ break; -+ -+ case UF_TEST_MODE: -+ /** @todo Add CLEAR_FEATURE for TEST modes. */ -+ break; -+ -+ default: -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ } -+ do_setup_in_status_phase(pcd); -+ break; -+ -+ case UT_ENDPOINT: -+ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); -+ if (ep == 0) { -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ } -+ -+ pcd_clear_halt(pcd, ep); -+ -+ break; -+ } -+} -+ -+/** -+ * This function process the SET_ADDRESS Setup Commands. -+ */ -+static inline void do_set_address(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; -+ usb_device_request_t ctrl = pcd->setup_pkt->req; -+ -+ if (ctrl.bmRequestType == UT_DEVICE) { -+ dcfg_data_t dcfg = {.d32 = 0 }; -+ -+#ifdef DEBUG_EP0 -+// DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue); -+#endif -+ dcfg.b.devaddr = UGETW(ctrl.wValue); -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32); -+ do_setup_in_status_phase(pcd); -+ } -+} -+ -+/** -+ * This function processes SETUP commands. In Linux, the USB Command -+ * processing is done in two places - the first being the PCD and the -+ * second in the Gadget Driver (for example, the File-Backed Storage -+ * Gadget Driver). -+ * -+ *
Parameter NameMeaning
otg_capSpecifies the OTG capabilities. The driver will automatically detect the -+ value for this parameter if none is specified. -+ - 0: HNP and SRP capable (default, if available) -+ - 1: SRP Only capable -+ - 2: No HNP/SRP capable -+
dma_enableSpecifies whether to use slave or DMA mode for accessing the data FIFOs. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: Slave -+ - 1: DMA (default, if available) -+
dma_burst_sizeThe DMA Burst size (applicable only for External DMA Mode). -+ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32) -+
speedSpecifies the maximum speed of operation in host and device mode. The -+ actual speed depends on the speed of the attached device and the value of -+ phy_type. -+ - 0: High Speed (default) -+ - 1: Full Speed -+
host_support_fs_ls_low_powerSpecifies whether low power mode is supported when attached to a Full -+ Speed or Low Speed device in host mode. -+ - 0: Don't support low power mode (default) -+ - 1: Support low power mode -+
host_ls_low_power_phy_clkSpecifies the PHY clock rate in low power mode when connected to a Low -+ Speed device in host mode. This parameter is applicable only if -+ HOST_SUPPORT_FS_LS_LOW_POWER is enabled. -+ - 0: 48 MHz (default) -+ - 1: 6 MHz -+
enable_dynamic_fifo Specifies whether FIFOs may be resized by the driver software. -+ - 0: Use cC FIFO size parameters -+ - 1: Allow dynamic FIFO sizing (default) -+
data_fifo_sizeTotal number of 4-byte words in the data FIFO memory. This memory -+ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs. -+ - Values: 32 to 32768 (default 8192) -+ -+ Note: The total FIFO memory depth in the FPGA configuration is 8192. -+
dev_rx_fifo_sizeNumber of 4-byte words in the Rx FIFO in device mode when dynamic -+ FIFO sizing is enabled. -+ - Values: 16 to 32768 (default 1064) -+
dev_nperio_tx_fifo_sizeNumber of 4-byte words in the non-periodic Tx FIFO in device mode when -+ dynamic FIFO sizing is enabled. -+ - Values: 16 to 32768 (default 1024) -+
dev_perio_tx_fifo_size_n (n = 1 to 15)Number of 4-byte words in each of the periodic Tx FIFOs in device mode -+ when dynamic FIFO sizing is enabled. -+ - Values: 4 to 768 (default 256) -+
host_rx_fifo_sizeNumber of 4-byte words in the Rx FIFO in host mode when dynamic FIFO -+ sizing is enabled. -+ - Values: 16 to 32768 (default 1024) -+
host_nperio_tx_fifo_sizeNumber of 4-byte words in the non-periodic Tx FIFO in host mode when -+ dynamic FIFO sizing is enabled in the core. -+ - Values: 16 to 32768 (default 1024) -+
host_perio_tx_fifo_sizeNumber of 4-byte words in the host periodic Tx FIFO when dynamic FIFO -+ sizing is enabled. -+ - Values: 16 to 32768 (default 1024) -+
max_transfer_sizeThe maximum transfer size supported in bytes. -+ - Values: 2047 to 65,535 (default 65,535) -+
max_packet_countThe maximum number of packets in a transfer. -+ - Values: 15 to 511 (default 511) -+
host_channelsThe number of host channel registers to use. -+ - Values: 1 to 16 (default 12) -+ -+ Note: The FPGA configuration supports a maximum of 12 host channels. -+
dev_endpointsThe number of endpoints in addition to EP0 available for device mode -+ operations. -+ - Values: 1 to 15 (default 6 IN and OUT) -+ -+ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in -+ addition to EP0. -+
phy_typeSpecifies the type of PHY interface to use. By default, the driver will -+ automatically detect the phy_type. -+ - 0: Full Speed -+ - 1: UTMI+ (default, if available) -+ - 2: ULPI -+
phy_utmi_widthSpecifies the UTMI+ Data Width. This parameter is applicable for a -+ phy_type of UTMI+. Also, this parameter is applicable only if the -+ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the -+ core has been configured to work at either data path width. -+ - Values: 8 or 16 bits (default 16) -+
phy_ulpi_ddrSpecifies whether the ULPI operates at double or single data rate. This -+ parameter is only applicable if phy_type is ULPI. -+ - 0: single data rate ULPI interface with 8 bit wide data bus (default) -+ - 1: double data rate ULPI interface with 4 bit wide data bus -+
i2c_enableSpecifies whether to use the I2C interface for full speed PHY. This -+ parameter is only applicable if PHY_TYPE is FS. -+ - 0: Disabled (default) -+ - 1: Enabled -+
ulpi_fs_lsSpecifies whether to use ULPI FS/LS mode only. -+ - 0: Disabled (default) -+ - 1: Enabled -+
ts_dlineSpecifies whether term select D-Line pulsing for all PHYs is enabled. -+ - 0: Disabled (default) -+ - 1: Enabled -+
en_multiple_tx_fifoSpecifies whether dedicatedto tx fifos are enabled for non periodic IN EPs. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: Disabled -+ - 1: Enabled (default, if available) -+
dev_tx_fifo_size_n (n = 1 to 15)Number of 4-byte words in each of the Tx FIFOs in device mode -+ when dynamic FIFO sizing is enabled. -+ - Values: 4 to 768 (default 256) -+
tx_thr_lengthTransmit Threshold length in 32 bit double words -+ - Values: 8 to 128 (default 64) -+
rx_thr_lengthReceive Threshold length in 32 bit double words -+ - Values: 8 to 128 (default 64) -+
thr_ctlSpecifies whether to enable Thresholding for Device mode. Bits 0, 1, 2 of -+ this parmater specifies if thresholding is enabled for non-Iso Tx, Iso Tx and -+ Rx transfers accordingly. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - Values: 0 to 7 (default 0) -+ Bit values indicate: -+ - 0: Thresholding disabled -+ - 1: Thresholding enabled -+
dma_desc_enableSpecifies whether to enable Descriptor DMA mode. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: Descriptor DMA disabled -+ - 1: Descriptor DMA (default, if available) -+
mpi_enableSpecifies whether to enable MPI enhancement mode. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: MPI disabled (default) -+ - 1: MPI enable -+
pti_enableSpecifies whether to enable PTI enhancement support. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: PTI disabled (default) -+ - 1: PTI enable -+
lpm_enableSpecifies whether to enable LPM support. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: LPM disabled -+ - 1: LPM enable (default, if available) -+
ic_usb_capSpecifies whether to enable IC_USB capability. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: IC_USB disabled (default, if available) -+ - 1: IC_USB enable -+
ahb_thr_ratioSpecifies AHB Threshold ratio. -+ - Values: 0 to 3 (default 0) -+
power_downSpecifies Power Down(Hibernation) Mode. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: Power Down disabled (default) -+ - 2: Power Down enabled -+
reload_ctlSpecifies whether dynamic reloading of the HFIR register is allowed during -+ run time. The driver will automatically detect the value for this parameter if -+ none is specified. In case the HFIR value is reloaded when HFIR.RldCtrl == 1'b0 -+ the core might misbehave. -+ - 0: Reload Control disabled (default) -+ - 1: Reload Control enabled -+
dev_out_nakSpecifies whether Device OUT NAK enhancement enabled or no. -+ The driver will automatically detect the value for this parameter if -+ none is specified. This parameter is valid only when OTG_EN_DESC_DMA == 1b1. -+ - 0: The core does not set NAK after Bulk OUT transfer complete (default) -+ - 1: The core sets NAK after Bulk OUT transfer complete -+
cont_on_bnaSpecifies whether Enable Continue on BNA enabled or no. -+ After receiving BNA interrupt the core disables the endpoint,when the -+ endpoint is re-enabled by the application the -+ - 0: Core starts processing from the DOEPDMA descriptor (default) -+ - 1: Core starts processing from the descriptor which received the BNA. -+ This parameter is valid only when OTG_EN_DESC_DMA == 1b1. -+
ahb_singleThis bit when programmed supports SINGLE transfers for remainder data -+ in a transfer for DMA mode of operation. -+ - 0: The remainder data will be sent using INCR burst size (default) -+ - 1: The remainder data will be sent using SINGLE burst size. -+
adp_enableSpecifies whether ADP feature is enabled. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: ADP feature disabled (default) -+ - 1: ADP feature enabled -+
otg_verSpecifies whether OTG is performing as USB OTG Revision 2.0 or Revision 1.3 -+ USB OTG device. -+ - 0: OTG 2.0 support disabled (default) -+ - 1: OTG 2.0 support enabled -+
-+ * -+ * -+ * -+ * -+ * -+ * -+ * -+ * -+ * -+ * -+ * -+ * -+ * -+ * -+ * -+ * -+ * -+ * -+ * -+ * -+ * -+ * -+ * -+ *
Command Driver Description
GET_STATUS PCD Command is processed as -+ * defined in chapter 9 of the USB 2.0 Specification chapter 9 -+ *
CLEAR_FEATURE PCD The Device and Endpoint -+ * requests are the ENDPOINT_HALT feature is procesed, all others the -+ * interface requests are ignored.
SET_FEATURE PCD The Device and Endpoint -+ * requests are processed by the PCD. Interface requests are passed -+ * to the Gadget Driver.
SET_ADDRESS PCD Program the DCFG reg, -+ * with device address received
GET_DESCRIPTOR Gadget Driver Return the -+ * requested descriptor
SET_DESCRIPTOR Gadget Driver Optional - -+ * not implemented by any of the existing Gadget Drivers.
SET_CONFIGURATION Gadget Driver Disable -+ * all EPs and enable EPs for new configuration.
GET_CONFIGURATION Gadget Driver Return -+ * the current configuration
SET_INTERFACE Gadget Driver Disable all -+ * EPs and enable EPs for new configuration.
GET_INTERFACE Gadget Driver Return the -+ * current interface.
SYNC_FRAME PCD Display debug -+ * message.
-+ * -+ * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are -+ * processed by pcd_setup. Calling the Function Driver's setup function from -+ * pcd_setup processes the gadget SETUP commands. -+ */ -+static inline void pcd_setup(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ usb_device_request_t ctrl = pcd->setup_pkt->req; -+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; -+ -+ deptsiz0_data_t doeptsize0 = {.d32 = 0 }; -+ -+#ifdef DWC_UTE_CFI -+ int retval = 0; -+ struct cfi_usb_ctrlrequest cfi_req; -+#endif -+ -+ doeptsize0.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doeptsiz); -+ -+ /** In BDMA more then 1 setup packet is not supported till 3.00a */ -+ if (core_if->dma_enable && core_if->dma_desc_enable == 0 -+ && (doeptsize0.b.supcnt < 2) -+ && (core_if->snpsid < OTG_CORE_REV_2_94a)) { -+ DWC_ERROR -+ ("\n\n----------- CANNOT handle > 1 setup packet in DMA mode\n\n"); -+ } -+ if ((core_if->snpsid >= OTG_CORE_REV_3_00a) -+ && (core_if->dma_enable == 1) && (core_if->dma_desc_enable == 0)) { -+ ctrl = -+ (pcd->setup_pkt + -+ (3 - doeptsize0.b.supcnt - 1 + -+ ep0->dwc_ep.stp_rollover))->req; -+ } -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n", -+ ctrl.bmRequestType, ctrl.bRequest, -+ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), -+ UGETW(ctrl.wLength)); -+#endif -+ -+ /* Clean up the request queue */ -+ dwc_otg_request_nuke(ep0); -+ ep0->stopped = 0; -+ -+ if (ctrl.bmRequestType & UE_DIR_IN) { -+ ep0->dwc_ep.is_in = 1; -+ pcd->ep0state = EP0_IN_DATA_PHASE; -+ } else { -+ ep0->dwc_ep.is_in = 0; -+ pcd->ep0state = EP0_OUT_DATA_PHASE; -+ } -+ -+ if (UGETW(ctrl.wLength) == 0) { -+ ep0->dwc_ep.is_in = 1; -+ pcd->ep0state = EP0_IN_STATUS_PHASE; -+ } -+ -+ if (UT_GET_TYPE(ctrl.bmRequestType) != UT_STANDARD) { -+ -+#ifdef DWC_UTE_CFI -+ DWC_MEMCPY(&cfi_req, &ctrl, sizeof(usb_device_request_t)); -+ -+ //printk(KERN_ALERT "CFI: req_type=0x%02x; req=0x%02x\n", -+ ctrl.bRequestType, ctrl.bRequest); -+ if (UT_GET_TYPE(cfi_req.bRequestType) == UT_VENDOR) { -+ if (cfi_req.bRequest > 0xB0 && cfi_req.bRequest < 0xBF) { -+ retval = cfi_setup(pcd, &cfi_req); -+ if (retval < 0) { -+ ep0_do_stall(pcd, retval); -+ pcd->ep0_pending = 0; -+ return; -+ } -+ -+ /* if need gadget setup then call it and check the retval */ -+ if (pcd->cfi->need_gadget_att) { -+ retval = -+ cfi_gadget_setup(pcd, -+ &pcd-> -+ cfi->ctrl_req); -+ if (retval < 0) { -+ pcd->ep0_pending = 0; -+ return; -+ } -+ } -+ -+ if (pcd->cfi->need_status_in_complete) { -+ do_setup_in_status_phase(pcd); -+ } -+ return; -+ } -+ } -+#endif -+ -+ /* handle non-standard (class/vendor) requests in the gadget driver */ -+ do_gadget_setup(pcd, &ctrl); -+ return; -+ } -+ -+ /** @todo NGS: Handle bad setup packet? */ -+ -+/////////////////////////////////////////// -+//// --- Standard Request handling --- //// -+ -+ switch (ctrl.bRequest) { -+ case UR_GET_STATUS: -+ do_get_status(pcd); -+ break; -+ -+ case UR_CLEAR_FEATURE: -+ do_clear_feature(pcd); -+ break; -+ -+ case UR_SET_FEATURE: -+ do_set_feature(pcd); -+ break; -+ -+ case UR_SET_ADDRESS: -+ do_set_address(pcd); -+ break; -+ -+ case UR_SET_INTERFACE: -+ case UR_SET_CONFIG: -+// _pcd->request_config = 1; /* Configuration changed */ -+ do_gadget_setup(pcd, &ctrl); -+ break; -+ -+ case UR_SYNCH_FRAME: -+ do_gadget_setup(pcd, &ctrl); -+ break; -+ -+ default: -+ /* Call the Gadget Driver's setup functions */ -+ do_gadget_setup(pcd, &ctrl); -+ break; -+ } -+} -+ -+/** -+ * This function completes the ep0 control transfer. -+ */ -+static int32_t ep0_complete_request(dwc_otg_pcd_ep_t * ep) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ dwc_otg_dev_in_ep_regs_t *in_ep_regs = -+ dev_if->in_ep_regs[ep->dwc_ep.num]; -+#ifdef DEBUG_EP0 -+ dwc_otg_dev_out_ep_regs_t *out_ep_regs = -+ dev_if->out_ep_regs[ep->dwc_ep.num]; -+#endif -+ deptsiz0_data_t deptsiz; -+ dev_dma_desc_sts_t desc_sts; -+ dwc_otg_pcd_request_t *req; -+ int is_last = 0; -+ dwc_otg_pcd_t *pcd = ep->pcd; -+ -+#ifdef DWC_UTE_CFI -+ struct cfi_usb_ctrlrequest *ctrlreq; -+ int retval = -DWC_E_NOT_SUPPORTED; -+#endif -+ -+ desc_sts.b.bytes = 0; -+ -+ if (pcd->ep0_pending && DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ if (ep->dwc_ep.is_in) { -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n"); -+#endif -+ do_setup_out_status_phase(pcd); -+ } else { -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n"); -+#endif -+ -+#ifdef DWC_UTE_CFI -+ ctrlreq = &pcd->cfi->ctrl_req; -+ -+ if (UT_GET_TYPE(ctrlreq->bRequestType) == UT_VENDOR) { -+ if (ctrlreq->bRequest > 0xB0 -+ && ctrlreq->bRequest < 0xBF) { -+ -+ /* Return if the PCD failed to handle the request */ -+ if ((retval = -+ pcd->cfi->ops. -+ ctrl_write_complete(pcd->cfi, -+ pcd)) < 0) { -+ CFI_INFO -+ ("ERROR setting a new value in the PCD(%d)\n", -+ retval); -+ ep0_do_stall(pcd, retval); -+ pcd->ep0_pending = 0; -+ return 0; -+ } -+ -+ /* If the gadget needs to be notified on the request */ -+ if (pcd->cfi->need_gadget_att == 1) { -+ //retval = do_gadget_setup(pcd, &pcd->cfi->ctrl_req); -+ retval = -+ cfi_gadget_setup(pcd, -+ &pcd->cfi-> -+ ctrl_req); -+ -+ /* Return from the function if the gadget failed to process -+ * the request properly - this should never happen !!! -+ */ -+ if (retval < 0) { -+ CFI_INFO -+ ("ERROR setting a new value in the gadget(%d)\n", -+ retval); -+ pcd->ep0_pending = 0; -+ return 0; -+ } -+ } -+ -+ CFI_INFO("%s: RETVAL=%d\n", __func__, -+ retval); -+ /* If we hit here then the PCD and the gadget has properly -+ * handled the request - so send the ZLP IN to the host. -+ */ -+ /* @todo: MAS - decide whether we need to start the setup -+ * stage based on the need_setup value of the cfi object -+ */ -+ do_setup_in_status_phase(pcd); -+ pcd->ep0_pending = 0; -+ return 1; -+ } -+ } -+#endif -+ -+ do_setup_in_status_phase(pcd); -+ } -+ pcd->ep0_pending = 0; -+ return 1; -+ } -+ -+ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ return 0; -+ } -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ -+ if (pcd->ep0state == EP0_OUT_STATUS_PHASE -+ || pcd->ep0state == EP0_IN_STATUS_PHASE) { -+ is_last = 1; -+ } else if (ep->dwc_ep.is_in) { -+ deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz); -+ if (core_if->dma_desc_enable != 0) -+ desc_sts = dev_if->in_desc_addr->status; -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCDV, "%d len=%d xfersize=%d pktcnt=%d\n", -+ ep->dwc_ep.num, ep->dwc_ep.xfer_len, -+ deptsiz.b.xfersize, deptsiz.b.pktcnt); -+#endif -+ -+ if (((core_if->dma_desc_enable == 0) -+ && (deptsiz.b.xfersize == 0)) -+ || ((core_if->dma_desc_enable != 0) -+ && (desc_sts.b.bytes == 0))) { -+ req->actual = ep->dwc_ep.xfer_count; -+ /* Is a Zero Len Packet needed? */ -+ if (req->sent_zlp) { -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n"); -+#endif -+ req->sent_zlp = 0; -+ } -+ do_setup_out_status_phase(pcd); -+ } -+ } else { -+ /* ep0-OUT */ -+#ifdef DEBUG_EP0 -+ deptsiz.d32 = DWC_READ_REG32(&out_ep_regs->doeptsiz); -+ DWC_DEBUGPL(DBG_PCDV, "%d len=%d xsize=%d pktcnt=%d\n", -+ ep->dwc_ep.num, ep->dwc_ep.xfer_len, -+ deptsiz.b.xfersize, deptsiz.b.pktcnt); -+#endif -+ req->actual = ep->dwc_ep.xfer_count; -+ -+ /* Is a Zero Len Packet needed? */ -+ if (req->sent_zlp) { -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n"); -+#endif -+ req->sent_zlp = 0; -+ } -+ /* For older cores do setup in status phase in Slave/BDMA modes, -+ * starting from 3.00 do that only in slave, and for DMA modes -+ * just re-enable ep 0 OUT here*/ -+ if (core_if->dma_enable == 0 -+ || (core_if->dma_desc_enable == 0 -+ && core_if->snpsid <= OTG_CORE_REV_2_94a)) { -+ do_setup_in_status_phase(pcd); -+ } else if (core_if->snpsid >= OTG_CORE_REV_3_00a) { -+ DWC_DEBUGPL(DBG_PCDV, -+ "Enable out ep before in status phase\n"); -+ ep0_out_start(core_if, pcd); -+ } -+ } -+ -+ /* Complete the request */ -+ if (is_last) { -+ dwc_otg_request_done(ep, req, 0); -+ ep->dwc_ep.start_xfer_buff = 0; -+ ep->dwc_ep.xfer_buff = 0; -+ ep->dwc_ep.xfer_len = 0; -+ return 1; -+ } -+ return 0; -+} -+ -+#ifdef DWC_UTE_CFI -+/** -+ * This function calculates traverses all the CFI DMA descriptors and -+ * and accumulates the bytes that are left to be transfered. -+ * -+ * @return The total bytes left to transfered, or a negative value as failure -+ */ -+static inline int cfi_calc_desc_residue(dwc_otg_pcd_ep_t * ep) -+{ -+ int32_t ret = 0; -+ int i; -+ struct dwc_otg_dma_desc *ddesc = NULL; -+ struct cfi_ep *cfiep; -+ -+ /* See if the pcd_ep has its respective cfi_ep mapped */ -+ cfiep = get_cfi_ep_by_pcd_ep(ep->pcd->cfi, ep); -+ if (!cfiep) { -+ CFI_INFO("%s: Failed to find ep\n", __func__); -+ return -1; -+ } -+ -+ ddesc = ep->dwc_ep.descs; -+ -+ for (i = 0; (i < cfiep->desc_count) && (i < MAX_DMA_DESCS_PER_EP); i++) { -+ -+#if defined(PRINT_CFI_DMA_DESCS) -+ print_desc(ddesc, ep->ep.name, i); -+#endif -+ ret += ddesc->status.b.bytes; -+ ddesc++; -+ } -+ -+ if (ret) -+ CFI_INFO("!!!!!!!!!! WARNING (%s) - residue=%d\n", __func__, -+ ret); -+ -+ return ret; -+} -+#endif -+ -+/** -+ * This function completes the request for the EP. If there are -+ * additional requests for the EP in the queue they will be started. -+ */ -+static void complete_ep(dwc_otg_pcd_ep_t * ep) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); -+ struct device *dev = dwc_otg_pcd_to_dev(ep->pcd); -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ dwc_otg_dev_in_ep_regs_t *in_ep_regs = -+ dev_if->in_ep_regs[ep->dwc_ep.num]; -+ deptsiz_data_t deptsiz; -+ dev_dma_desc_sts_t desc_sts; -+ dwc_otg_pcd_request_t *req = 0; -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ uint32_t byte_count = 0; -+ int is_last = 0; -+ int i; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s() %d-%s\n", __func__, ep->dwc_ep.num, -+ (ep->dwc_ep.is_in ? "IN" : "OUT")); -+ -+ /* Get any pending requests */ -+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ if (!req) { -+ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep); -+ return; -+ } -+ } else { -+ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep); -+ return; -+ } -+ -+ DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending); -+ -+ if (ep->dwc_ep.is_in) { -+ deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz); -+ -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable == 0) { -+ if (deptsiz.b.xfersize == 0 -+ && deptsiz.b.pktcnt == 0) { -+ byte_count = -+ ep->dwc_ep.xfer_len - -+ ep->dwc_ep.xfer_count; -+ -+ ep->dwc_ep.xfer_buff += byte_count; -+ ep->dwc_ep.dma_addr += byte_count; -+ ep->dwc_ep.xfer_count += byte_count; -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "%d-%s len=%d xfersize=%d pktcnt=%d\n", -+ ep->dwc_ep.num, -+ (ep->dwc_ep. -+ is_in ? "IN" : "OUT"), -+ ep->dwc_ep.xfer_len, -+ deptsiz.b.xfersize, -+ deptsiz.b.pktcnt); -+ -+ if (ep->dwc_ep.xfer_len < -+ ep->dwc_ep.total_len) { -+ dwc_otg_ep_start_transfer -+ (core_if, &ep->dwc_ep); -+ } else if (ep->dwc_ep.sent_zlp) { -+ /* -+ * This fragment of code should initiate 0 -+ * length transfer in case if it is queued -+ * a transfer with size divisible to EPs max -+ * packet size and with usb_request zero field -+ * is set, which means that after data is transfered, -+ * it is also should be transfered -+ * a 0 length packet at the end. For Slave and -+ * Buffer DMA modes in this case SW has -+ * to initiate 2 transfers one with transfer size, -+ * and the second with 0 size. For Descriptor -+ * DMA mode SW is able to initiate a transfer, -+ * which will handle all the packets including -+ * the last 0 length. -+ */ -+ ep->dwc_ep.sent_zlp = 0; -+ dwc_otg_ep_start_zl_transfer -+ (core_if, &ep->dwc_ep); -+ } else { -+ is_last = 1; -+ } -+ } else { -+ if (ep->dwc_ep.type == -+ DWC_OTG_EP_TYPE_ISOC) { -+ req->actual = 0; -+ dwc_otg_request_done(ep, req, 0); -+ -+ ep->dwc_ep.start_xfer_buff = 0; -+ ep->dwc_ep.xfer_buff = 0; -+ ep->dwc_ep.xfer_len = 0; -+ -+ /* If there is a request in the queue start it. */ -+ start_next_request(ep); -+ } else -+ DWC_WARN -+ ("Incomplete transfer (%d - %s [siz=%d pkt=%d])\n", -+ ep->dwc_ep.num, -+ (ep->dwc_ep.is_in ? "IN" : "OUT"), -+ deptsiz.b.xfersize, -+ deptsiz.b.pktcnt); -+ } -+ } else { -+ dma_desc = ep->dwc_ep.desc_addr; -+ byte_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ -+#ifdef DWC_UTE_CFI -+ CFI_INFO("%s: BUFFER_MODE=%d\n", __func__, -+ ep->dwc_ep.buff_mode); -+ if (ep->dwc_ep.buff_mode != BM_STANDARD) { -+ int residue; -+ -+ residue = cfi_calc_desc_residue(ep); -+ if (residue < 0) -+ return; -+ -+ byte_count = residue; -+ } else { -+#endif -+ for (i = 0; i < ep->dwc_ep.desc_cnt; -+ ++i) { -+ desc_sts = dma_desc->status; -+ byte_count += desc_sts.b.bytes; -+ dma_desc++; -+ } -+#ifdef DWC_UTE_CFI -+ } -+#endif -+ if (byte_count == 0) { -+ ep->dwc_ep.xfer_count = -+ ep->dwc_ep.total_len; -+ is_last = 1; -+ } else { -+ DWC_WARN("Incomplete transfer\n"); -+ } -+ } -+ } else { -+ if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) { -+ DWC_DEBUGPL(DBG_PCDV, -+ "%d-%s len=%d xfersize=%d pktcnt=%d\n", -+ ep->dwc_ep.num, -+ ep->dwc_ep.is_in ? "IN" : "OUT", -+ ep->dwc_ep.xfer_len, -+ deptsiz.b.xfersize, -+ deptsiz.b.pktcnt); -+ -+ /* Check if the whole transfer was completed, -+ * if no, setup transfer for next portion of data -+ */ -+ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { -+ dwc_otg_ep_start_transfer(core_if, -+ &ep->dwc_ep); -+ } else if (ep->dwc_ep.sent_zlp) { -+ /* -+ * This fragment of code should initiate 0 -+ * length trasfer in case if it is queued -+ * a trasfer with size divisible to EPs max -+ * packet size and with usb_request zero field -+ * is set, which means that after data is transfered, -+ * it is also should be transfered -+ * a 0 length packet at the end. For Slave and -+ * Buffer DMA modes in this case SW has -+ * to initiate 2 transfers one with transfer size, -+ * and the second with 0 size. For Desriptor -+ * DMA mode SW is able to initiate a transfer, -+ * which will handle all the packets including -+ * the last 0 legth. -+ */ -+ ep->dwc_ep.sent_zlp = 0; -+ dwc_otg_ep_start_zl_transfer(core_if, -+ &ep->dwc_ep); -+ } else { -+ is_last = 1; -+ } -+ } else { -+ DWC_WARN -+ ("Incomplete transfer (%d-%s [siz=%d pkt=%d])\n", -+ ep->dwc_ep.num, -+ (ep->dwc_ep.is_in ? "IN" : "OUT"), -+ deptsiz.b.xfersize, deptsiz.b.pktcnt); -+ } -+ } -+ } else { -+ dwc_otg_dev_out_ep_regs_t *out_ep_regs = -+ dev_if->out_ep_regs[ep->dwc_ep.num]; -+ desc_sts.d32 = 0; -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable) { -+ dma_desc = ep->dwc_ep.desc_addr; -+ byte_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ -+#ifdef DWC_UTE_CFI -+ CFI_INFO("%s: BUFFER_MODE=%d\n", __func__, -+ ep->dwc_ep.buff_mode); -+ if (ep->dwc_ep.buff_mode != BM_STANDARD) { -+ int residue; -+ residue = cfi_calc_desc_residue(ep); -+ if (residue < 0) -+ return; -+ byte_count = residue; -+ } else { -+#endif -+ -+ for (i = 0; i < ep->dwc_ep.desc_cnt; -+ ++i) { -+ desc_sts = dma_desc->status; -+ byte_count += desc_sts.b.bytes; -+ dma_desc++; -+ } -+ -+#ifdef DWC_UTE_CFI -+ } -+#endif -+ /* Checking for interrupt Out transfers with not -+ * dword aligned mps sizes -+ */ -+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_INTR && -+ (ep->dwc_ep.maxpacket%4)) { -+ ep->dwc_ep.xfer_count = -+ ep->dwc_ep.total_len - byte_count; -+ if ((ep->dwc_ep.xfer_len % -+ ep->dwc_ep.maxpacket) -+ && (ep->dwc_ep.xfer_len / -+ ep->dwc_ep.maxpacket < -+ MAX_DMA_DESC_CNT)) -+ ep->dwc_ep.xfer_len -= -+ (ep->dwc_ep.desc_cnt - -+ 1) * ep->dwc_ep.maxpacket + -+ ep->dwc_ep.xfer_len % -+ ep->dwc_ep.maxpacket; -+ else -+ ep->dwc_ep.xfer_len -= -+ ep->dwc_ep.desc_cnt * -+ ep->dwc_ep.maxpacket; -+ if (ep->dwc_ep.xfer_len > 0) { -+ dwc_otg_ep_start_transfer -+ (core_if, &ep->dwc_ep); -+ } else { -+ is_last = 1; -+ } -+ } else { -+ ep->dwc_ep.xfer_count = -+ ep->dwc_ep.total_len - byte_count + -+ ((4 - -+ (ep->dwc_ep. -+ total_len & 0x3)) & 0x3); -+ is_last = 1; -+ } -+ } else { -+ deptsiz.d32 = 0; -+ deptsiz.d32 = -+ DWC_READ_REG32(&out_ep_regs->doeptsiz); -+ -+ byte_count = (ep->dwc_ep.xfer_len - -+ ep->dwc_ep.xfer_count - -+ deptsiz.b.xfersize); -+ ep->dwc_ep.xfer_buff += byte_count; -+ ep->dwc_ep.dma_addr += byte_count; -+ ep->dwc_ep.xfer_count += byte_count; -+ -+ /* Check if the whole transfer was completed, -+ * if no, setup transfer for next portion of data -+ */ -+ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { -+ dwc_otg_ep_start_transfer(core_if, -+ &ep->dwc_ep); -+ } else if (ep->dwc_ep.sent_zlp) { -+ /* -+ * This fragment of code should initiate 0 -+ * length trasfer in case if it is queued -+ * a trasfer with size divisible to EPs max -+ * packet size and with usb_request zero field -+ * is set, which means that after data is transfered, -+ * it is also should be transfered -+ * a 0 length packet at the end. For Slave and -+ * Buffer DMA modes in this case SW has -+ * to initiate 2 transfers one with transfer size, -+ * and the second with 0 size. For Desriptor -+ * DMA mode SW is able to initiate a transfer, -+ * which will handle all the packets including -+ * the last 0 legth. -+ */ -+ ep->dwc_ep.sent_zlp = 0; -+ dwc_otg_ep_start_zl_transfer(core_if, -+ &ep->dwc_ep); -+ } else { -+ is_last = 1; -+ } -+ } -+ } else { -+ /* Check if the whole transfer was completed, -+ * if no, setup transfer for next portion of data -+ */ -+ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { -+ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); -+ } else if (ep->dwc_ep.sent_zlp) { -+ /* -+ * This fragment of code should initiate 0 -+ * length transfer in case if it is queued -+ * a transfer with size divisible to EPs max -+ * packet size and with usb_request zero field -+ * is set, which means that after data is transfered, -+ * it is also should be transfered -+ * a 0 length packet at the end. For Slave and -+ * Buffer DMA modes in this case SW has -+ * to initiate 2 transfers one with transfer size, -+ * and the second with 0 size. For Descriptor -+ * DMA mode SW is able to initiate a transfer, -+ * which will handle all the packets including -+ * the last 0 length. -+ */ -+ ep->dwc_ep.sent_zlp = 0; -+ dwc_otg_ep_start_zl_transfer(core_if, -+ &ep->dwc_ep); -+ } else { -+ is_last = 1; -+ } -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "addr %p, %d-%s len=%d cnt=%d xsize=%d pktcnt=%d\n", -+ &out_ep_regs->doeptsiz, ep->dwc_ep.num, -+ ep->dwc_ep.is_in ? "IN" : "OUT", -+ ep->dwc_ep.xfer_len, ep->dwc_ep.xfer_count, -+ deptsiz.b.xfersize, deptsiz.b.pktcnt); -+ } -+ -+ /* Complete the request */ -+ if (is_last) { -+#ifdef DWC_UTE_CFI -+ if (ep->dwc_ep.buff_mode != BM_STANDARD) { -+ req->actual = ep->dwc_ep.cfi_req_len - byte_count; -+ } else { -+#endif -+ req->actual = ep->dwc_ep.xfer_count; -+#ifdef DWC_UTE_CFI -+ } -+#endif -+ if (req->dw_align_buf) { -+ if (!ep->dwc_ep.is_in) { -+ dwc_memcpy(req->buf, req->dw_align_buf, req->length); -+ } -+ DWC_DMA_FREE(dev, req->length, req->dw_align_buf, -+ req->dw_align_buf_dma); -+ } -+ -+ dwc_otg_request_done(ep, req, 0); -+ -+ ep->dwc_ep.start_xfer_buff = 0; -+ ep->dwc_ep.xfer_buff = 0; -+ ep->dwc_ep.xfer_len = 0; -+ -+ /* If there is a request in the queue start it. */ -+ start_next_request(ep); -+ } -+} -+ -+#ifdef DWC_EN_ISOC -+ -+/** -+ * This function BNA interrupt for Isochronous EPs -+ * -+ */ -+static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t * ep) -+{ -+ dwc_ep_t *dwc_ep = &ep->dwc_ep; -+ volatile uint32_t *addr; -+ depctl_data_t depctl = {.d32 = 0 }; -+ dwc_otg_pcd_t *pcd = ep->pcd; -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ int i; -+ -+ dma_desc = -+ dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num); -+ -+ if (dwc_ep->is_in) { -+ dev_dma_desc_sts_t sts = {.d32 = 0 }; -+ for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) { -+ sts.d32 = dma_desc->status.d32; -+ sts.b_iso_in.bs = BS_HOST_READY; -+ dma_desc->status.d32 = sts.d32; -+ } -+ } else { -+ dev_dma_desc_sts_t sts = {.d32 = 0 }; -+ for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) { -+ sts.d32 = dma_desc->status.d32; -+ sts.b_iso_out.bs = BS_HOST_READY; -+ dma_desc->status.d32 = sts.d32; -+ } -+ } -+ -+ if (dwc_ep->is_in == 0) { -+ addr = -+ &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep-> -+ num]->doepctl; -+ } else { -+ addr = -+ &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl; -+ } -+ depctl.b.epena = 1; -+ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32); -+} -+ -+/** -+ * This function sets latest iso packet information(non-PTI mode) -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ * -+ */ -+void set_current_pkt_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ deptsiz_data_t deptsiz = {.d32 = 0 }; -+ dma_addr_t dma_addr; -+ uint32_t offset; -+ -+ if (ep->proc_buf_num) -+ dma_addr = ep->dma_addr1; -+ else -+ dma_addr = ep->dma_addr0; -+ -+ if (ep->is_in) { -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if->dev_if-> -+ in_ep_regs[ep->num]->dieptsiz); -+ offset = ep->data_per_frame; -+ } else { -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[ep->num]->doeptsiz); -+ offset = -+ ep->data_per_frame + -+ (0x4 & (0x4 - (ep->data_per_frame & 0x3))); -+ } -+ -+ if (!deptsiz.b.xfersize) { -+ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame; -+ ep->pkt_info[ep->cur_pkt].offset = -+ ep->cur_pkt_dma_addr - dma_addr; -+ ep->pkt_info[ep->cur_pkt].status = 0; -+ } else { -+ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame; -+ ep->pkt_info[ep->cur_pkt].offset = -+ ep->cur_pkt_dma_addr - dma_addr; -+ ep->pkt_info[ep->cur_pkt].status = -DWC_E_NO_DATA; -+ } -+ ep->cur_pkt_addr += offset; -+ ep->cur_pkt_dma_addr += offset; -+ ep->cur_pkt++; -+} -+ -+/** -+ * This function sets latest iso packet information(DDMA mode) -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param dwc_ep The EP to start the transfer on. -+ * -+ */ -+static void set_ddma_iso_pkts_info(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * dwc_ep) -+{ -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ dev_dma_desc_sts_t sts = {.d32 = 0 }; -+ iso_pkt_info_t *iso_packet; -+ uint32_t data_per_desc; -+ uint32_t offset; -+ int i, j; -+ -+ iso_packet = dwc_ep->pkt_info; -+ -+ /** Reinit closed DMA Descriptors*/ -+ /** ISO OUT EP */ -+ if (dwc_ep->is_in == 0) { -+ dma_desc = -+ dwc_ep->iso_desc_addr + -+ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; -+ offset = 0; -+ -+ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; -+ i += dwc_ep->pkt_per_frm) { -+ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { -+ data_per_desc = -+ ((j + 1) * dwc_ep->maxpacket > -+ dwc_ep-> -+ data_per_frame) ? dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket : dwc_ep->maxpacket; -+ data_per_desc += -+ (data_per_desc % 4) ? (4 - -+ data_per_desc % -+ 4) : 0; -+ -+ sts.d32 = dma_desc->status.d32; -+ -+ /* Write status in iso_packet_decsriptor */ -+ iso_packet->status = -+ sts.b_iso_out.rxsts + -+ (sts.b_iso_out.bs ^ BS_DMA_DONE); -+ if (iso_packet->status) { -+ iso_packet->status = -DWC_E_NO_DATA; -+ } -+ -+ /* Received data length */ -+ if (!sts.b_iso_out.rxbytes) { -+ iso_packet->length = -+ data_per_desc - -+ sts.b_iso_out.rxbytes; -+ } else { -+ iso_packet->length = -+ data_per_desc - -+ sts.b_iso_out.rxbytes + (4 - -+ dwc_ep->data_per_frame -+ % 4); -+ } -+ -+ iso_packet->offset = offset; -+ -+ offset += data_per_desc; -+ dma_desc++; -+ iso_packet++; -+ } -+ } -+ -+ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { -+ data_per_desc = -+ ((j + 1) * dwc_ep->maxpacket > -+ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket : dwc_ep->maxpacket; -+ data_per_desc += -+ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; -+ -+ sts.d32 = dma_desc->status.d32; -+ -+ /* Write status in iso_packet_decsriptor */ -+ iso_packet->status = -+ sts.b_iso_out.rxsts + -+ (sts.b_iso_out.bs ^ BS_DMA_DONE); -+ if (iso_packet->status) { -+ iso_packet->status = -DWC_E_NO_DATA; -+ } -+ -+ /* Received data length */ -+ iso_packet->length = -+ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes; -+ -+ iso_packet->offset = offset; -+ -+ offset += data_per_desc; -+ iso_packet++; -+ dma_desc++; -+ } -+ -+ sts.d32 = dma_desc->status.d32; -+ -+ /* Write status in iso_packet_decsriptor */ -+ iso_packet->status = -+ sts.b_iso_out.rxsts + (sts.b_iso_out.bs ^ BS_DMA_DONE); -+ if (iso_packet->status) { -+ iso_packet->status = -DWC_E_NO_DATA; -+ } -+ /* Received data length */ -+ if (!sts.b_iso_out.rxbytes) { -+ iso_packet->length = -+ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes; -+ } else { -+ iso_packet->length = -+ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes + -+ (4 - dwc_ep->data_per_frame % 4); -+ } -+ -+ iso_packet->offset = offset; -+ } else { -+/** ISO IN EP */ -+ -+ dma_desc = -+ dwc_ep->iso_desc_addr + -+ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; -+ -+ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { -+ sts.d32 = dma_desc->status.d32; -+ -+ /* Write status in iso packet descriptor */ -+ iso_packet->status = -+ sts.b_iso_in.txsts + -+ (sts.b_iso_in.bs ^ BS_DMA_DONE); -+ if (iso_packet->status != 0) { -+ iso_packet->status = -DWC_E_NO_DATA; -+ -+ } -+ /* Bytes has been transfered */ -+ iso_packet->length = -+ dwc_ep->data_per_frame - sts.b_iso_in.txbytes; -+ -+ dma_desc++; -+ iso_packet++; -+ } -+ -+ sts.d32 = dma_desc->status.d32; -+ while (sts.b_iso_in.bs == BS_DMA_BUSY) { -+ sts.d32 = dma_desc->status.d32; -+ } -+ -+ /* Write status in iso packet descriptor ??? do be done with ERROR codes */ -+ iso_packet->status = -+ sts.b_iso_in.txsts + (sts.b_iso_in.bs ^ BS_DMA_DONE); -+ if (iso_packet->status != 0) { -+ iso_packet->status = -DWC_E_NO_DATA; -+ } -+ -+ /* Bytes has been transfered */ -+ iso_packet->length = -+ dwc_ep->data_per_frame - sts.b_iso_in.txbytes; -+ } -+} -+ -+/** -+ * This function reinitialize DMA Descriptors for Isochronous transfer -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param dwc_ep The EP to start the transfer on. -+ * -+ */ -+static void reinit_ddma_iso_xfer(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep) -+{ -+ int i, j; -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ dma_addr_t dma_ad; -+ volatile uint32_t *addr; -+ dev_dma_desc_sts_t sts = {.d32 = 0 }; -+ uint32_t data_per_desc; -+ -+ if (dwc_ep->is_in == 0) { -+ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl; -+ } else { -+ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl; -+ } -+ -+ if (dwc_ep->proc_buf_num == 0) { -+ /** Buffer 0 descriptors setup */ -+ dma_ad = dwc_ep->dma_addr0; -+ } else { -+ /** Buffer 1 descriptors setup */ -+ dma_ad = dwc_ep->dma_addr1; -+ } -+ -+ /** Reinit closed DMA Descriptors*/ -+ /** ISO OUT EP */ -+ if (dwc_ep->is_in == 0) { -+ dma_desc = -+ dwc_ep->iso_desc_addr + -+ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; -+ -+ sts.b_iso_out.bs = BS_HOST_READY; -+ sts.b_iso_out.rxsts = 0; -+ sts.b_iso_out.l = 0; -+ sts.b_iso_out.sp = 0; -+ sts.b_iso_out.ioc = 0; -+ sts.b_iso_out.pid = 0; -+ sts.b_iso_out.framenum = 0; -+ -+ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; -+ i += dwc_ep->pkt_per_frm) { -+ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { -+ data_per_desc = -+ ((j + 1) * dwc_ep->maxpacket > -+ dwc_ep-> -+ data_per_frame) ? dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket : dwc_ep->maxpacket; -+ data_per_desc += -+ (data_per_desc % 4) ? (4 - -+ data_per_desc % -+ 4) : 0; -+ sts.b_iso_out.rxbytes = data_per_desc; -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ dma_ad += data_per_desc; -+ dma_desc++; -+ } -+ } -+ -+ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { -+ -+ data_per_desc = -+ ((j + 1) * dwc_ep->maxpacket > -+ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket : dwc_ep->maxpacket; -+ data_per_desc += -+ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; -+ sts.b_iso_out.rxbytes = data_per_desc; -+ -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ dma_desc++; -+ dma_ad += data_per_desc; -+ } -+ -+ sts.b_iso_out.ioc = 1; -+ sts.b_iso_out.l = dwc_ep->proc_buf_num; -+ -+ data_per_desc = -+ ((j + 1) * dwc_ep->maxpacket > -+ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket : dwc_ep->maxpacket; -+ data_per_desc += -+ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; -+ sts.b_iso_out.rxbytes = data_per_desc; -+ -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ } else { -+/** ISO IN EP */ -+ -+ dma_desc = -+ dwc_ep->iso_desc_addr + -+ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; -+ -+ sts.b_iso_in.bs = BS_HOST_READY; -+ sts.b_iso_in.txsts = 0; -+ sts.b_iso_in.sp = 0; -+ sts.b_iso_in.ioc = 0; -+ sts.b_iso_in.pid = dwc_ep->pkt_per_frm; -+ sts.b_iso_in.framenum = dwc_ep->next_frame; -+ sts.b_iso_in.txbytes = dwc_ep->data_per_frame; -+ sts.b_iso_in.l = 0; -+ -+ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ sts.b_iso_in.framenum += dwc_ep->bInterval; -+ dma_ad += dwc_ep->data_per_frame; -+ dma_desc++; -+ } -+ -+ sts.b_iso_in.ioc = 1; -+ sts.b_iso_in.l = dwc_ep->proc_buf_num; -+ -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ dwc_ep->next_frame = -+ sts.b_iso_in.framenum + dwc_ep->bInterval * 1; -+ } -+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; -+} -+ -+/** -+ * This function is to handle Iso EP transfer complete interrupt -+ * in case Iso out packet was dropped -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param dwc_ep The EP for wihich transfer complete was asserted -+ * -+ */ -+static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * dwc_ep) -+{ -+ uint32_t dma_addr; -+ uint32_t drp_pkt; -+ uint32_t drp_pkt_cnt; -+ deptsiz_data_t deptsiz = {.d32 = 0 }; -+ depctl_data_t depctl = {.d32 = 0 }; -+ int i; -+ -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[dwc_ep->num]->doeptsiz); -+ -+ drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt; -+ drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm); -+ -+ /* Setting dropped packets status */ -+ for (i = 0; i < drp_pkt_cnt; ++i) { -+ dwc_ep->pkt_info[drp_pkt].status = -DWC_E_NO_DATA; -+ drp_pkt++; -+ deptsiz.b.pktcnt--; -+ } -+ -+ if (deptsiz.b.pktcnt > 0) { -+ deptsiz.b.xfersize = -+ dwc_ep->xfer_len - (dwc_ep->pkt_cnt - -+ deptsiz.b.pktcnt) * dwc_ep->maxpacket; -+ } else { -+ deptsiz.b.xfersize = 0; -+ deptsiz.b.pktcnt = 0; -+ } -+ -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz, -+ deptsiz.d32); -+ -+ if (deptsiz.b.pktcnt > 0) { -+ if (dwc_ep->proc_buf_num) { -+ dma_addr = -+ dwc_ep->dma_addr1 + dwc_ep->xfer_len - -+ deptsiz.b.xfersize; -+ } else { -+ dma_addr = -+ dwc_ep->dma_addr0 + dwc_ep->xfer_len - -+ deptsiz.b.xfersize;; -+ } -+ -+ DWC_WRITE_REG32(&core_if->dev_if-> -+ out_ep_regs[dwc_ep->num]->doepdma, dma_addr); -+ -+ /** Re-enable endpoint, clear nak */ -+ depctl.d32 = 0; -+ depctl.b.epena = 1; -+ depctl.b.cnak = 1; -+ -+ DWC_MODIFY_REG32(&core_if->dev_if-> -+ out_ep_regs[dwc_ep->num]->doepctl, depctl.d32, -+ depctl.d32); -+ return 0; -+ } else { -+ return 1; -+ } -+} -+ -+/** -+ * This function sets iso packets information(PTI mode) -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ * -+ */ -+static uint32_t set_iso_pkts_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ int i, j; -+ dma_addr_t dma_ad; -+ iso_pkt_info_t *packet_info = ep->pkt_info; -+ uint32_t offset; -+ uint32_t frame_data; -+ deptsiz_data_t deptsiz; -+ -+ if (ep->proc_buf_num == 0) { -+ /** Buffer 0 descriptors setup */ -+ dma_ad = ep->dma_addr0; -+ } else { -+ /** Buffer 1 descriptors setup */ -+ dma_ad = ep->dma_addr1; -+ } -+ -+ if (ep->is_in) { -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> -+ dieptsiz); -+ } else { -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[ep->num]-> -+ doeptsiz); -+ } -+ -+ if (!deptsiz.b.xfersize) { -+ offset = 0; -+ for (i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm) { -+ frame_data = ep->data_per_frame; -+ for (j = 0; j < ep->pkt_per_frm; ++j) { -+ -+ /* Packet status - is not set as initially -+ * it is set to 0 and if packet was sent -+ successfully, status field will remain 0*/ -+ -+ /* Bytes has been transfered */ -+ packet_info->length = -+ (ep->maxpacket < -+ frame_data) ? ep->maxpacket : frame_data; -+ -+ /* Received packet offset */ -+ packet_info->offset = offset; -+ offset += packet_info->length; -+ frame_data -= packet_info->length; -+ -+ packet_info++; -+ } -+ } -+ return 1; -+ } else { -+ /* This is a workaround for in case of Transfer Complete with -+ * PktDrpSts interrupts merging - in this case Transfer complete -+ * interrupt for Isoc Out Endpoint is asserted without PktDrpSts -+ * set and with DOEPTSIZ register non zero. Investigations showed, -+ * that this happens when Out packet is dropped, but because of -+ * interrupts merging during first interrupt handling PktDrpSts -+ * bit is cleared and for next merged interrupts it is not reset. -+ * In this case SW hadles the interrupt as if PktDrpSts bit is set. -+ */ -+ if (ep->is_in) { -+ return 1; -+ } else { -+ return handle_iso_out_pkt_dropped(core_if, ep); -+ } -+ } -+} -+ -+/** -+ * This function is to handle Iso EP transfer complete interrupt -+ * -+ * @param pcd The PCD -+ * @param ep The EP for which transfer complete was asserted -+ * -+ */ -+static void complete_iso_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); -+ dwc_ep_t *dwc_ep = &ep->dwc_ep; -+ uint8_t is_last = 0; -+ -+ if (ep->dwc_ep.next_frame == 0xffffffff) { -+ DWC_WARN("Next frame is not set!\n"); -+ return; -+ } -+ -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable) { -+ set_ddma_iso_pkts_info(core_if, dwc_ep); -+ reinit_ddma_iso_xfer(core_if, dwc_ep); -+ is_last = 1; -+ } else { -+ if (core_if->pti_enh_enable) { -+ if (set_iso_pkts_info(core_if, dwc_ep)) { -+ dwc_ep->proc_buf_num = -+ (dwc_ep->proc_buf_num ^ 1) & 0x1; -+ dwc_otg_iso_ep_start_buf_transfer -+ (core_if, dwc_ep); -+ is_last = 1; -+ } -+ } else { -+ set_current_pkt_info(core_if, dwc_ep); -+ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { -+ is_last = 1; -+ dwc_ep->cur_pkt = 0; -+ dwc_ep->proc_buf_num = -+ (dwc_ep->proc_buf_num ^ 1) & 0x1; -+ if (dwc_ep->proc_buf_num) { -+ dwc_ep->cur_pkt_addr = -+ dwc_ep->xfer_buff1; -+ dwc_ep->cur_pkt_dma_addr = -+ dwc_ep->dma_addr1; -+ } else { -+ dwc_ep->cur_pkt_addr = -+ dwc_ep->xfer_buff0; -+ dwc_ep->cur_pkt_dma_addr = -+ dwc_ep->dma_addr0; -+ } -+ -+ } -+ dwc_otg_iso_ep_start_frm_transfer(core_if, -+ dwc_ep); -+ } -+ } -+ } else { -+ set_current_pkt_info(core_if, dwc_ep); -+ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { -+ is_last = 1; -+ dwc_ep->cur_pkt = 0; -+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; -+ if (dwc_ep->proc_buf_num) { -+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1; -+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1; -+ } else { -+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0; -+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0; -+ } -+ -+ } -+ dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep); -+ } -+ if (is_last) -+ dwc_otg_iso_buffer_done(pcd, ep, ep->iso_req_handle); -+} -+#endif /* DWC_EN_ISOC */ -+ -+/** -+ * This function handle BNA interrupt for Non Isochronous EPs -+ * -+ */ -+static void dwc_otg_pcd_handle_noniso_bna(dwc_otg_pcd_ep_t * ep) -+{ -+ dwc_ep_t *dwc_ep = &ep->dwc_ep; -+ volatile uint32_t *addr; -+ depctl_data_t depctl = {.d32 = 0 }; -+ dwc_otg_pcd_t *pcd = ep->pcd; -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ dev_dma_desc_sts_t sts = {.d32 = 0 }; -+ dwc_otg_core_if_t *core_if = ep->pcd->core_if; -+ int i, start; -+ -+ if (!dwc_ep->desc_cnt) -+ DWC_WARN("Ep%d %s Descriptor count = %d \n", dwc_ep->num, -+ (dwc_ep->is_in ? "IN" : "OUT"), dwc_ep->desc_cnt); -+ -+ if (core_if->core_params->cont_on_bna && !dwc_ep->is_in -+ && dwc_ep->type != DWC_OTG_EP_TYPE_CONTROL) { -+ uint32_t doepdma; -+ dwc_otg_dev_out_ep_regs_t *out_regs = -+ core_if->dev_if->out_ep_regs[dwc_ep->num]; -+ doepdma = DWC_READ_REG32(&(out_regs->doepdma)); -+ start = (doepdma - dwc_ep->dma_desc_addr)/sizeof(dwc_otg_dev_dma_desc_t); -+ dma_desc = &(dwc_ep->desc_addr[start]); -+ } else { -+ start = 0; -+ dma_desc = dwc_ep->desc_addr; -+ } -+ -+ -+ for (i = start; i < dwc_ep->desc_cnt; ++i, ++dma_desc) { -+ sts.d32 = dma_desc->status.d32; -+ sts.b.bs = BS_HOST_READY; -+ dma_desc->status.d32 = sts.d32; -+ } -+ -+ if (dwc_ep->is_in == 0) { -+ addr = -+ &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]-> -+ doepctl; -+ } else { -+ addr = -+ &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl; -+ } -+ depctl.b.epena = 1; -+ depctl.b.cnak = 1; -+ DWC_MODIFY_REG32(addr, 0, depctl.d32); -+} -+ -+/** -+ * This function handles EP0 Control transfers. -+ * -+ * The state of the control transfers are tracked in -+ * ep0state. -+ */ -+static void handle_ep0(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; -+ dev_dma_desc_sts_t desc_sts; -+ deptsiz0_data_t deptsiz; -+ uint32_t byte_count; -+ -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__); -+ print_ep0_state(pcd); -+#endif -+ -+// DWC_PRINTF("HANDLE EP0\n"); -+ -+ switch (pcd->ep0state) { -+ case EP0_DISCONNECT: -+ break; -+ -+ case EP0_IDLE: -+ pcd->request_config = 0; -+ -+ pcd_setup(pcd); -+ break; -+ -+ case EP0_IN_DATA_PHASE: -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n", -+ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"), -+ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket); -+#endif -+ -+ if (core_if->dma_enable != 0) { -+ /* -+ * For EP0 we can only program 1 packet at a time so we -+ * need to do the make calculations after each complete. -+ * Call write_packet to make the calculations, as in -+ * slave mode, and use those values to determine if we -+ * can complete. -+ */ -+ if (core_if->dma_desc_enable == 0) { -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if-> -+ dev_if->in_ep_regs[0]-> -+ dieptsiz); -+ byte_count = -+ ep0->dwc_ep.xfer_len - deptsiz.b.xfersize; -+ } else { -+ desc_sts = -+ core_if->dev_if->in_desc_addr->status; -+ byte_count = -+ ep0->dwc_ep.xfer_len - desc_sts.b.bytes; -+ } -+ ep0->dwc_ep.xfer_count += byte_count; -+ ep0->dwc_ep.xfer_buff += byte_count; -+ ep0->dwc_ep.dma_addr += byte_count; -+ } -+ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) { -+ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), -+ &ep0->dwc_ep); -+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); -+ } else if (ep0->dwc_ep.sent_zlp) { -+ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), -+ &ep0->dwc_ep); -+ ep0->dwc_ep.sent_zlp = 0; -+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n"); -+ } else { -+ ep0_complete_request(ep0); -+ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n"); -+ } -+ break; -+ case EP0_OUT_DATA_PHASE: -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n", -+ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"), -+ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket); -+#endif -+ if (core_if->dma_enable != 0) { -+ if (core_if->dma_desc_enable == 0) { -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if-> -+ dev_if->out_ep_regs[0]-> -+ doeptsiz); -+ byte_count = -+ ep0->dwc_ep.maxpacket - deptsiz.b.xfersize; -+ } else { -+ desc_sts = -+ core_if->dev_if->out_desc_addr->status; -+ byte_count = -+ ep0->dwc_ep.maxpacket - desc_sts.b.bytes; -+ } -+ ep0->dwc_ep.xfer_count += byte_count; -+ ep0->dwc_ep.xfer_buff += byte_count; -+ ep0->dwc_ep.dma_addr += byte_count; -+ } -+ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) { -+ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), -+ &ep0->dwc_ep); -+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); -+ } else if (ep0->dwc_ep.sent_zlp) { -+ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), -+ &ep0->dwc_ep); -+ ep0->dwc_ep.sent_zlp = 0; -+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n"); -+ } else { -+ ep0_complete_request(ep0); -+ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n"); -+ } -+ break; -+ -+ case EP0_IN_STATUS_PHASE: -+ case EP0_OUT_STATUS_PHASE: -+ DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n"); -+ ep0_complete_request(ep0); -+ pcd->ep0state = EP0_IDLE; -+ ep0->stopped = 1; -+ ep0->dwc_ep.is_in = 0; /* OUT for next SETUP */ -+ -+ /* Prepare for more SETUP Packets */ -+ if (core_if->dma_enable) { -+ ep0_out_start(core_if, pcd); -+ } -+ break; -+ -+ case EP0_STALL: -+ DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n"); -+ break; -+ } -+#ifdef DEBUG_EP0 -+ print_ep0_state(pcd); -+#endif -+} -+ -+/** -+ * Restart transfer -+ */ -+static void restart_transfer(dwc_otg_pcd_t * pcd, const uint32_t epnum) -+{ -+ dwc_otg_core_if_t *core_if; -+ dwc_otg_dev_if_t *dev_if; -+ deptsiz_data_t dieptsiz = {.d32 = 0 }; -+ dwc_otg_pcd_ep_t *ep; -+ -+ ep = get_in_ep(pcd, epnum); -+ -+#ifdef DWC_EN_ISOC -+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { -+ return; -+ } -+#endif /* DWC_EN_ISOC */ -+ -+ core_if = GET_CORE_IF(pcd); -+ dev_if = core_if->dev_if; -+ -+ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz); -+ -+ DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x xfer_len=%0x" -+ " stopped=%d\n", ep->dwc_ep.xfer_buff, -+ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len, ep->stopped); -+ /* -+ * If xfersize is 0 and pktcnt in not 0, resend the last packet. -+ */ -+ if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 && -+ ep->dwc_ep.start_xfer_buff != 0) { -+ if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) { -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff; -+ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count; -+ } else { -+ ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket; -+ /* convert packet size to dwords. */ -+ ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket; -+ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count; -+ } -+ ep->stopped = 0; -+ DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x " -+ "xfer_len=%0x stopped=%d\n", -+ ep->dwc_ep.xfer_buff, -+ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len, -+ ep->stopped); -+ if (epnum == 0) { -+ dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep); -+ } else { -+ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); -+ } -+ } -+} -+ -+/* -+ * This function create new nextep sequnce based on Learn Queue. -+ * -+ * @param core_if Programming view of DWC_otg controller -+ */ -+void predict_nextep_seq( dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_device_global_regs_t *dev_global_regs = -+ core_if->dev_if->dev_global_regs; -+ const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth; -+ /* Number of Token Queue Registers */ -+ const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8; -+ dtknq1_data_t dtknqr1; -+ uint32_t in_tkn_epnums[4]; -+ uint8_t seqnum[MAX_EPS_CHANNELS]; -+ uint8_t intkn_seq[TOKEN_Q_DEPTH]; -+ grstctl_t resetctl = {.d32 = 0 }; -+ uint8_t temp; -+ int ndx = 0; -+ int start = 0; -+ int end = 0; -+ int sort_done = 0; -+ int i = 0; -+ volatile uint32_t *addr = &dev_global_regs->dtknqr1; -+ -+ -+ DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH); -+ -+ /* Read the DTKNQ Registers */ -+ for (i = 0; i < DTKNQ_REG_CNT; i++) { -+ in_tkn_epnums[i] = DWC_READ_REG32(addr); -+ DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1, -+ in_tkn_epnums[i]); -+ if (addr == &dev_global_regs->dvbusdis) { -+ addr = &dev_global_regs->dtknqr3_dthrctl; -+ } else { -+ ++addr; -+ } -+ -+ } -+ -+ /* Copy the DTKNQR1 data to the bit field. */ -+ dtknqr1.d32 = in_tkn_epnums[0]; -+ if (dtknqr1.b.wrap_bit) { -+ ndx = dtknqr1.b.intknwptr; -+ end = ndx -1; -+ if (end < 0) -+ end = TOKEN_Q_DEPTH -1; -+ } else { -+ ndx = 0; -+ end = dtknqr1.b.intknwptr -1; -+ if (end < 0) -+ end = 0; -+ } -+ start = ndx; -+ -+ /* Fill seqnum[] by initial values: EP number + 31 */ -+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { -+ seqnum[i] = i +31; -+ } -+ -+ /* Fill intkn_seq[] from in_tkn_epnums[0] */ -+ for (i=0; i < 6; i++) -+ intkn_seq[i] = (in_tkn_epnums[0] >> ((7-i) * 4)) & 0xf; -+ -+ if (TOKEN_Q_DEPTH > 6) { -+ /* Fill intkn_seq[] from in_tkn_epnums[1] */ -+ for (i=6; i < 14; i++) -+ intkn_seq[i] = -+ (in_tkn_epnums[1] >> ((7 - (i - 6)) * 4)) & 0xf; -+ } -+ -+ if (TOKEN_Q_DEPTH > 14) { -+ /* Fill intkn_seq[] from in_tkn_epnums[1] */ -+ for (i=14; i < 22; i++) -+ intkn_seq[i] = -+ (in_tkn_epnums[2] >> ((7 - (i - 14)) * 4)) & 0xf; -+ } -+ -+ if (TOKEN_Q_DEPTH > 22) { -+ /* Fill intkn_seq[] from in_tkn_epnums[1] */ -+ for (i=22; i < 30; i++) -+ intkn_seq[i] = -+ (in_tkn_epnums[3] >> ((7 - (i - 22)) * 4)) & 0xf; -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s start=%d end=%d intkn_seq[]:\n", __func__, -+ start, end); -+ for (i=0; idev_if->num_in_eps; i++) { -+ if (core_if->nextep_seq[i] == 0xff ) -+ seqnum[i] = 0xff; -+ } -+ -+ /* Sort seqnum[] */ -+ sort_done = 0; -+ while (!sort_done) { -+ sort_done = 1; -+ for (i=0; idev_if->num_in_eps; i++) { -+ if (seqnum[i] > seqnum[i+1]) { -+ temp = seqnum[i]; -+ seqnum[i] = seqnum[i+1]; -+ seqnum[i+1] = temp; -+ sort_done = 0; -+ } -+ } -+ } -+ -+ ndx = start + seqnum[0]; -+ if (ndx >= TOKEN_Q_DEPTH) -+ ndx = ndx % TOKEN_Q_DEPTH; -+ core_if->first_in_nextep_seq = intkn_seq[ndx]; -+ -+ /* Update seqnum[] by EP numbers */ -+ for (i=0; i<=core_if->dev_if->num_in_eps; i++) { -+ ndx = start + i; -+ if (seqnum[i] < 31) { -+ ndx = start + seqnum[i]; -+ if (ndx >= TOKEN_Q_DEPTH) -+ ndx = ndx % TOKEN_Q_DEPTH; -+ seqnum[i] = intkn_seq[ndx]; -+ } else { -+ if (seqnum[i] < 0xff) { -+ seqnum[i] = seqnum[i] - 31; -+ } else { -+ break; -+ } -+ } -+ } -+ -+ /* Update nextep_seq[] based on seqnum[] */ -+ for (i=0; idev_if->num_in_eps; i++) { -+ if (seqnum[i] != 0xff) { -+ if (seqnum[i+1] != 0xff) { -+ core_if->nextep_seq[seqnum[i]] = seqnum[i+1]; -+ } else { -+ core_if->nextep_seq[seqnum[i]] = core_if->first_in_nextep_seq; -+ break; -+ } -+ } else { -+ break; -+ } -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", -+ __func__, core_if->first_in_nextep_seq); -+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { -+ DWC_DEBUGPL(DBG_PCDV,"%2d\n", core_if->nextep_seq[i]); -+ } -+ -+ /* Flush the Learning Queue */ -+ resetctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->grstctl); -+ resetctl.b.intknqflsh = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32); -+ -+ -+} -+ -+/** -+ * handle the IN EP disable interrupt. -+ */ -+static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t * pcd, -+ const uint32_t epnum) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ deptsiz_data_t dieptsiz = {.d32 = 0 }; -+ dctl_data_t dctl = {.d32 = 0 }; -+ dwc_otg_pcd_ep_t *ep; -+ dwc_ep_t *dwc_ep; -+ gintmsk_data_t gintmsk_data; -+ depctl_data_t depctl; -+ uint32_t diepdma; -+ uint32_t remain_to_transfer = 0; -+ uint8_t i; -+ uint32_t xfer_size; -+ -+ ep = get_in_ep(pcd, epnum); -+ dwc_ep = &ep->dwc_ep; -+ -+ if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num); -+ complete_ep(ep); -+ return; -+ } -+ -+ DWC_DEBUGPL(DBG_PCD, "diepctl%d=%0x\n", epnum, -+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl)); -+ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz); -+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl); -+ -+ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n", -+ dieptsiz.b.pktcnt, dieptsiz.b.xfersize); -+ -+ if ((core_if->start_predict == 0) || (depctl.b.eptype & 1)) { -+ if (ep->stopped) { -+ if (core_if->en_multiple_tx_fifo) -+ /* Flush the Tx FIFO */ -+ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num); -+ /* Clear the Global IN NP NAK */ -+ dctl.d32 = 0; -+ dctl.b.cgnpinnak = 1; -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); -+ /* Restart the transaction */ -+ if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) { -+ restart_transfer(pcd, epnum); -+ } -+ } else { -+ /* Restart the transaction */ -+ if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) { -+ restart_transfer(pcd, epnum); -+ } -+ DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n"); -+ } -+ return; -+ } -+ -+ if (core_if->start_predict > 2) { // NP IN EP -+ core_if->start_predict--; -+ return; -+ } -+ -+ core_if->start_predict--; -+ -+ if (core_if->start_predict == 1) { // All NP IN Ep's disabled now -+ -+ predict_nextep_seq(core_if); -+ -+ /* Update all active IN EP's NextEP field based of nextep_seq[] */ -+ for ( i = 0; i <= core_if->dev_if->num_in_eps; i++) { -+ depctl.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ if (core_if->nextep_seq[i] != 0xff) { // Active NP IN EP -+ depctl.b.nextep = core_if->nextep_seq[i]; -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); -+ } -+ } -+ /* Flush Shared NP TxFIFO */ -+ dwc_otg_flush_tx_fifo(core_if, 0); -+ /* Rewind buffers */ -+ if (!core_if->dma_desc_enable) { -+ i = core_if->first_in_nextep_seq; -+ do { -+ ep = get_in_ep(pcd, i); -+ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz); -+ xfer_size = ep->dwc_ep.total_len - ep->dwc_ep.xfer_count; -+ if (xfer_size > ep->dwc_ep.maxxfer) -+ xfer_size = ep->dwc_ep.maxxfer; -+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ if (dieptsiz.b.pktcnt != 0) { -+ if (xfer_size == 0) { -+ remain_to_transfer = 0; -+ } else { -+ if ((xfer_size % ep->dwc_ep.maxpacket) == 0) { -+ remain_to_transfer = -+ dieptsiz.b.pktcnt * ep->dwc_ep.maxpacket; -+ } else { -+ remain_to_transfer = ((dieptsiz.b.pktcnt -1) * ep->dwc_ep.maxpacket) -+ + (xfer_size % ep->dwc_ep.maxpacket); -+ } -+ } -+ diepdma = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepdma); -+ dieptsiz.b.xfersize = remain_to_transfer; -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, dieptsiz.d32); -+ diepdma = ep->dwc_ep.dma_addr + (xfer_size - remain_to_transfer); -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, diepdma); -+ } -+ i = core_if->nextep_seq[i]; -+ } while (i != core_if->first_in_nextep_seq); -+ } else { // dma_desc_enable -+ DWC_PRINTF("%s Learning Queue not supported in DDMA\n", __func__); -+ } -+ -+ /* Restart transfers in predicted sequences */ -+ i = core_if->first_in_nextep_seq; -+ do { -+ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz); -+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ if (dieptsiz.b.pktcnt != 0) { -+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ depctl.b.epena = 1; -+ depctl.b.cnak = 1; -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); -+ } -+ i = core_if->nextep_seq[i]; -+ } while (i != core_if->first_in_nextep_seq); -+ -+ /* Clear the global non-periodic IN NAK handshake */ -+ dctl.d32 = 0; -+ dctl.b.cgnpinnak = 1; -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); -+ -+ /* Unmask EP Mismatch interrupt */ -+ gintmsk_data.d32 = 0; -+ gintmsk_data.b.epmismatch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, gintmsk_data.d32); -+ -+ core_if->start_predict = 0; -+ -+ } -+} -+ -+/** -+ * Handler for the IN EP timeout handshake interrupt. -+ */ -+static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t * pcd, -+ const uint32_t epnum) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ -+#ifdef DEBUG -+ deptsiz_data_t dieptsiz = {.d32 = 0 }; -+ uint32_t num = 0; -+#endif -+ dctl_data_t dctl = {.d32 = 0 }; -+ dwc_otg_pcd_ep_t *ep; -+ -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ ep = get_in_ep(pcd, epnum); -+ -+ /* Disable the NP Tx Fifo Empty Interrrupt */ -+ if (!core_if->dma_enable) { -+ intr_mask.b.nptxfempty = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, -+ intr_mask.d32, 0); -+ } -+ /** @todo NGS Check EP type. -+ * Implement for Periodic EPs */ -+ /* -+ * Non-periodic EP -+ */ -+ /* Enable the Global IN NAK Effective Interrupt */ -+ intr_mask.b.ginnakeff = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32); -+ -+ /* Set Global IN NAK */ -+ dctl.b.sgnpinnak = 1; -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); -+ -+ ep->stopped = 1; -+ -+#ifdef DEBUG -+ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[num]->dieptsiz); -+ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n", -+ dieptsiz.b.pktcnt, dieptsiz.b.xfersize); -+#endif -+ -+#ifdef DISABLE_PERIODIC_EP -+ /* -+ * Set the NAK bit for this EP to -+ * start the disable process. -+ */ -+ diepctl.d32 = 0; -+ diepctl.b.snak = 1; -+ DWC_MODIFY_REG32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32, -+ diepctl.d32); -+ ep->disabling = 1; -+ ep->stopped = 1; -+#endif -+} -+ -+/** -+ * Handler for the IN EP NAK interrupt. -+ */ -+static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t * pcd, -+ const uint32_t epnum) -+{ -+ /** @todo implement ISR */ -+ dwc_otg_core_if_t *core_if; -+ diepmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "IN EP NAK"); -+ core_if = GET_CORE_IF(pcd); -+ intr_mask.b.nak = 1; -+ -+ if (core_if->multiproc_int_enable) { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ diepeachintmsk[epnum], intr_mask.d32, 0); -+ } else { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->diepmsk, -+ intr_mask.d32, 0); -+ } -+ -+ return 1; -+} -+ -+/** -+ * Handler for the OUT EP Babble interrupt. -+ */ -+static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t * pcd, -+ const uint32_t epnum) -+{ -+ /** @todo implement ISR */ -+ dwc_otg_core_if_t *core_if; -+ doepmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", -+ "OUT EP Babble"); -+ core_if = GET_CORE_IF(pcd); -+ intr_mask.b.babble = 1; -+ -+ if (core_if->multiproc_int_enable) { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ doepeachintmsk[epnum], intr_mask.d32, 0); -+ } else { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, -+ intr_mask.d32, 0); -+ } -+ -+ return 1; -+} -+ -+/** -+ * Handler for the OUT EP NAK interrupt. -+ */ -+static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t * pcd, -+ const uint32_t epnum) -+{ -+ /** @todo implement ISR */ -+ dwc_otg_core_if_t *core_if; -+ doepmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_DEBUGPL(DBG_ANY, "INTERRUPT Handler not implemented for %s\n", "OUT EP NAK"); -+ core_if = GET_CORE_IF(pcd); -+ intr_mask.b.nak = 1; -+ -+ if (core_if->multiproc_int_enable) { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ doepeachintmsk[epnum], intr_mask.d32, 0); -+ } else { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, -+ intr_mask.d32, 0); -+ } -+ -+ return 1; -+} -+ -+/** -+ * Handler for the OUT EP NYET interrupt. -+ */ -+static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t * pcd, -+ const uint32_t epnum) -+{ -+ /** @todo implement ISR */ -+ dwc_otg_core_if_t *core_if; -+ doepmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET"); -+ core_if = GET_CORE_IF(pcd); -+ intr_mask.b.nyet = 1; -+ -+ if (core_if->multiproc_int_enable) { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ doepeachintmsk[epnum], intr_mask.d32, 0); -+ } else { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, -+ intr_mask.d32, 0); -+ } -+ -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that an IN EP has a pending Interrupt. -+ * The sequence for handling the IN EP interrupt is shown below: -+ * -# Read the Device All Endpoint Interrupt register -+ * -# Repeat the following for each IN EP interrupt bit set (from -+ * LSB to MSB). -+ * -# Read the Device Endpoint Interrupt (DIEPINTn) register -+ * -# If "Transfer Complete" call the request complete function -+ * -# If "Endpoint Disabled" complete the EP disable procedure. -+ * -# If "AHB Error Interrupt" log error -+ * -# If "Time-out Handshake" log error -+ * -# If "IN Token Received when TxFIFO Empty" write packet to Tx -+ * FIFO. -+ * -# If "IN Token EP Mismatch" (disable, this is handled by EP -+ * Mismatch Interrupt) -+ */ -+static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t * pcd) -+{ -+#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \ -+do { \ -+ diepint_data_t diepint = {.d32=0}; \ -+ diepint.b.__intr = 1; \ -+ DWC_WRITE_REG32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \ -+ diepint.d32); \ -+} while (0) -+ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ diepint_data_t diepint = {.d32 = 0 }; -+ depctl_data_t depctl = {.d32 = 0 }; -+ uint32_t ep_intr; -+ uint32_t epnum = 0; -+ dwc_otg_pcd_ep_t *ep; -+ dwc_ep_t *dwc_ep; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd); -+ -+ /* Read in the device interrupt bits */ -+ ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if); -+ -+ /* Service the Device IN interrupts for each endpoint */ -+ while (ep_intr) { -+ if (ep_intr & 0x1) { -+ uint32_t empty_msk; -+ /* Get EP pointer */ -+ ep = get_in_ep(pcd, epnum); -+ dwc_ep = &ep->dwc_ep; -+ -+ depctl.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl); -+ empty_msk = -+ DWC_READ_REG32(&dev_if-> -+ dev_global_regs->dtknqr4_fifoemptymsk); -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "IN EP INTERRUPT - %d\nepmty_msk - %8x diepctl - %8x\n", -+ epnum, empty_msk, depctl.d32); -+ -+ DWC_DEBUGPL(DBG_PCD, -+ "EP%d-%s: type=%d, mps=%d\n", -+ dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"), -+ dwc_ep->type, dwc_ep->maxpacket); -+ -+ diepint.d32 = -+ dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep); -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "EP %d Interrupt Register - 0x%x\n", epnum, -+ diepint.d32); -+ /* Transfer complete */ -+ if (diepint.b.xfercompl) { -+ /* Disable the NP Tx FIFO Empty -+ * Interrupt */ -+ if (core_if->en_multiple_tx_fifo == 0) { -+ intr_mask.b.nptxfempty = 1; -+ DWC_MODIFY_REG32 -+ (&core_if->core_global_regs->gintmsk, -+ intr_mask.d32, 0); -+ } else { -+ /* Disable the Tx FIFO Empty Interrupt for this EP */ -+ uint32_t fifoemptymsk = -+ 0x1 << dwc_ep->num; -+ DWC_MODIFY_REG32(&core_if-> -+ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, -+ fifoemptymsk, 0); -+ } -+ /* Clear the bit in DIEPINTn for this interrupt */ -+ CLEAR_IN_EP_INTR(core_if, epnum, xfercompl); -+ -+ /* Complete the transfer */ -+ if (epnum == 0) { -+ handle_ep0(pcd); -+ } -+#ifdef DWC_EN_ISOC -+ else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ if (!ep->stopped) -+ complete_iso_ep(pcd, ep); -+ } -+#endif /* DWC_EN_ISOC */ -+#ifdef DWC_UTE_PER_IO -+ else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ if (!ep->stopped) -+ complete_xiso_ep(ep); -+ } -+#endif /* DWC_UTE_PER_IO */ -+ else { -+ if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC && -+ dwc_ep->bInterval > 1) { -+ dwc_ep->frame_num += dwc_ep->bInterval; -+ if (dwc_ep->frame_num > 0x3FFF) -+ { -+ dwc_ep->frm_overrun = 1; -+ dwc_ep->frame_num &= 0x3FFF; -+ } else -+ dwc_ep->frm_overrun = 0; -+ } -+ complete_ep(ep); -+ if(diepint.b.nak) -+ CLEAR_IN_EP_INTR(core_if, epnum, nak); -+ } -+ } -+ /* Endpoint disable */ -+ if (diepint.b.epdisabled) { -+ DWC_DEBUGPL(DBG_ANY, "EP%d IN disabled\n", -+ epnum); -+ handle_in_ep_disable_intr(pcd, epnum); -+ -+ /* Clear the bit in DIEPINTn for this interrupt */ -+ CLEAR_IN_EP_INTR(core_if, epnum, epdisabled); -+ } -+ /* AHB Error */ -+ if (diepint.b.ahberr) { -+ DWC_ERROR("EP%d IN AHB Error\n", epnum); -+ /* Clear the bit in DIEPINTn for this interrupt */ -+ CLEAR_IN_EP_INTR(core_if, epnum, ahberr); -+ } -+ /* TimeOUT Handshake (non-ISOC IN EPs) */ -+ if (diepint.b.timeout) { -+ DWC_ERROR("EP%d IN Time-out\n", epnum); -+ handle_in_ep_timeout_intr(pcd, epnum); -+ -+ CLEAR_IN_EP_INTR(core_if, epnum, timeout); -+ } -+ /** IN Token received with TxF Empty */ -+ if (diepint.b.intktxfemp) { -+ DWC_DEBUGPL(DBG_ANY, -+ "EP%d IN TKN TxFifo Empty\n", -+ epnum); -+ if (!ep->stopped && epnum != 0) { -+ -+ diepmsk_data_t diepmsk = {.d32 = 0 }; -+ diepmsk.b.intktxfemp = 1; -+ -+ if (core_if->multiproc_int_enable) { -+ DWC_MODIFY_REG32 -+ (&dev_if->dev_global_regs->diepeachintmsk -+ [epnum], diepmsk.d32, 0); -+ } else { -+ DWC_MODIFY_REG32 -+ (&dev_if->dev_global_regs->diepmsk, -+ diepmsk.d32, 0); -+ } -+ } else if (core_if->dma_desc_enable -+ && epnum == 0 -+ && pcd->ep0state == -+ EP0_OUT_STATUS_PHASE) { -+ // EP0 IN set STALL -+ depctl.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs -+ [epnum]->diepctl); -+ -+ /* set the disable and stall bits */ -+ if (depctl.b.epena) { -+ depctl.b.epdis = 1; -+ } -+ depctl.b.stall = 1; -+ DWC_WRITE_REG32(&dev_if->in_ep_regs -+ [epnum]->diepctl, -+ depctl.d32); -+ } -+ CLEAR_IN_EP_INTR(core_if, epnum, intktxfemp); -+ } -+ /** IN Token Received with EP mismatch */ -+ if (diepint.b.intknepmis) { -+ DWC_DEBUGPL(DBG_ANY, -+ "EP%d IN TKN EP Mismatch\n", epnum); -+ CLEAR_IN_EP_INTR(core_if, epnum, intknepmis); -+ } -+ /** IN Endpoint NAK Effective */ -+ if (diepint.b.inepnakeff) { -+ DWC_DEBUGPL(DBG_ANY, -+ "EP%d IN EP NAK Effective\n", -+ epnum); -+ /* Periodic EP */ -+ if (ep->disabling) { -+ depctl.d32 = 0; -+ depctl.b.snak = 1; -+ depctl.b.epdis = 1; -+ DWC_MODIFY_REG32(&dev_if->in_ep_regs -+ [epnum]->diepctl, -+ depctl.d32, -+ depctl.d32); -+ } -+ CLEAR_IN_EP_INTR(core_if, epnum, inepnakeff); -+ -+ } -+ -+ /** IN EP Tx FIFO Empty Intr */ -+ if (diepint.b.emptyintr) { -+ DWC_DEBUGPL(DBG_ANY, -+ "EP%d Tx FIFO Empty Intr \n", -+ epnum); -+ write_empty_tx_fifo(pcd, epnum); -+ -+ CLEAR_IN_EP_INTR(core_if, epnum, emptyintr); -+ -+ } -+ -+ /** IN EP BNA Intr */ -+ if (diepint.b.bna) { -+ CLEAR_IN_EP_INTR(core_if, epnum, bna); -+ if (core_if->dma_desc_enable) { -+#ifdef DWC_EN_ISOC -+ if (dwc_ep->type == -+ DWC_OTG_EP_TYPE_ISOC) { -+ /* -+ * This checking is performed to prevent first "false" BNA -+ * handling occuring right after reconnect -+ */ -+ if (dwc_ep->next_frame != -+ 0xffffffff) -+ dwc_otg_pcd_handle_iso_bna(ep); -+ } else -+#endif /* DWC_EN_ISOC */ -+ { -+ dwc_otg_pcd_handle_noniso_bna(ep); -+ } -+ } -+ } -+ /* NAK Interrutp */ -+ if (diepint.b.nak) { -+ DWC_DEBUGPL(DBG_ANY, "EP%d IN NAK Interrupt\n", -+ epnum); -+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { -+ depctl_data_t depctl; -+ if (ep->dwc_ep.frame_num == 0xFFFFFFFF) { -+ ep->dwc_ep.frame_num = core_if->frame_num; -+ if (ep->dwc_ep.bInterval > 1) { -+ depctl.d32 = 0; -+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl); -+ if (ep->dwc_ep.frame_num & 0x1) { -+ depctl.b.setd1pid = 1; -+ depctl.b.setd0pid = 0; -+ } else { -+ depctl.b.setd0pid = 1; -+ depctl.b.setd1pid = 0; -+ } -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32); -+ } -+ start_next_request(ep); -+ } -+ ep->dwc_ep.frame_num += ep->dwc_ep.bInterval; -+ if (dwc_ep->frame_num > 0x3FFF) { -+ dwc_ep->frm_overrun = 1; -+ dwc_ep->frame_num &= 0x3FFF; -+ } else -+ dwc_ep->frm_overrun = 0; -+ } -+ -+ CLEAR_IN_EP_INTR(core_if, epnum, nak); -+ } -+ } -+ epnum++; -+ ep_intr >>= 1; -+ } -+ -+ return 1; -+#undef CLEAR_IN_EP_INTR -+} -+ -+/** -+ * This interrupt indicates that an OUT EP has a pending Interrupt. -+ * The sequence for handling the OUT EP interrupt is shown below: -+ * -# Read the Device All Endpoint Interrupt register -+ * -# Repeat the following for each OUT EP interrupt bit set (from -+ * LSB to MSB). -+ * -# Read the Device Endpoint Interrupt (DOEPINTn) register -+ * -# If "Transfer Complete" call the request complete function -+ * -# If "Endpoint Disabled" complete the EP disable procedure. -+ * -# If "AHB Error Interrupt" log error -+ * -# If "Setup Phase Done" process Setup Packet (See Standard USB -+ * Command Processing) -+ */ -+static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t * pcd) -+{ -+#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \ -+do { \ -+ doepint_data_t doepint = {.d32=0}; \ -+ doepint.b.__intr = 1; \ -+ DWC_WRITE_REG32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \ -+ doepint.d32); \ -+} while (0) -+ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ uint32_t ep_intr; -+ doepint_data_t doepint = {.d32 = 0 }; -+ uint32_t epnum = 0; -+ dwc_otg_pcd_ep_t *ep; -+ dwc_ep_t *dwc_ep; -+ dctl_data_t dctl = {.d32 = 0 }; -+ gintmsk_data_t gintmsk = {.d32 = 0 }; -+ -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__); -+ -+ /* Read in the device interrupt bits */ -+ ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if); -+ -+ while (ep_intr) { -+ if (ep_intr & 0x1) { -+ /* Get EP pointer */ -+ ep = get_out_ep(pcd, epnum); -+ dwc_ep = &ep->dwc_ep; -+ -+#ifdef VERBOSE -+ DWC_DEBUGPL(DBG_PCDV, -+ "EP%d-%s: type=%d, mps=%d\n", -+ dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"), -+ dwc_ep->type, dwc_ep->maxpacket); -+#endif -+ doepint.d32 = -+ dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep); -+ /* Moved this interrupt upper due to core deffect of asserting -+ * OUT EP 0 xfercompl along with stsphsrcvd in BDMA */ -+ if (doepint.b.stsphsercvd) { -+ deptsiz0_data_t deptsiz; -+ CLEAR_OUT_EP_INTR(core_if, epnum, stsphsercvd); -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[0]->doeptsiz); -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a -+ && core_if->dma_enable -+ && core_if->dma_desc_enable == 0 -+ && doepint.b.xfercompl -+ && deptsiz.b.xfersize == 24) { -+ CLEAR_OUT_EP_INTR(core_if, epnum, -+ xfercompl); -+ doepint.b.xfercompl = 0; -+ ep0_out_start(core_if, pcd); -+ } -+ if ((core_if->dma_desc_enable) || -+ (core_if->dma_enable -+ && core_if->snpsid >= -+ OTG_CORE_REV_3_00a)) { -+ do_setup_in_status_phase(pcd); -+ } -+ } -+ /* Transfer complete */ -+ if (doepint.b.xfercompl) { -+ -+ if (epnum == 0) { -+ /* Clear the bit in DOEPINTn for this interrupt */ -+ CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl); -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { -+ DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n", -+ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepint), -+ doepint.d32); -+ DWC_DEBUGPL(DBG_PCDV, "DOEPCTL=%x \n", -+ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepctl)); -+ -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a -+ && core_if->dma_enable == 0) { -+ doepint_data_t doepint; -+ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[0]->doepint); -+ if (pcd->ep0state == EP0_IDLE && doepint.b.sr) { -+ CLEAR_OUT_EP_INTR(core_if, epnum, sr); -+ goto exit_xfercompl; -+ } -+ } -+ /* In case of DDMA look at SR bit to go to the Data Stage */ -+ if (core_if->dma_desc_enable) { -+ dev_dma_desc_sts_t status = {.d32 = 0}; -+ if (pcd->ep0state == EP0_IDLE) { -+ status.d32 = core_if->dev_if->setup_desc_addr[core_if-> -+ dev_if->setup_desc_index]->status.d32; -+ if(pcd->data_terminated) { -+ pcd->data_terminated = 0; -+ status.d32 = core_if->dev_if->out_desc_addr->status.d32; -+ dwc_memcpy(&pcd->setup_pkt->req, pcd->backup_buf, 8); -+ } -+ if (status.b.sr) { -+ if (doepint.b.setup) { -+ DWC_DEBUGPL(DBG_PCDV, "DMA DESC EP0_IDLE SR=1 setup=1\n"); -+ /* Already started data stage, clear setup */ -+ CLEAR_OUT_EP_INTR(core_if, epnum, setup); -+ doepint.b.setup = 0; -+ handle_ep0(pcd); -+ /* Prepare for more setup packets */ -+ if (pcd->ep0state == EP0_IN_STATUS_PHASE || -+ pcd->ep0state == EP0_IN_DATA_PHASE) { -+ ep0_out_start(core_if, pcd); -+ } -+ -+ goto exit_xfercompl; -+ } else { -+ /* Prepare for more setup packets */ -+ DWC_DEBUGPL(DBG_PCDV, -+ "EP0_IDLE SR=1 setup=0 new setup comes\n"); -+ ep0_out_start(core_if, pcd); -+ } -+ } -+ } else { -+ dwc_otg_pcd_request_t *req; -+ dev_dma_desc_sts_t status = {.d32 = 0}; -+ diepint_data_t diepint0; -+ diepint0.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepint); -+ -+ if (pcd->ep0state == EP0_STALL || pcd->ep0state == EP0_DISCONNECT) { -+ DWC_ERROR("EP0 is stalled/disconnected\n"); -+ } -+ -+ /* Clear IN xfercompl if set */ -+ if (diepint0.b.xfercompl && (pcd->ep0state == EP0_IN_STATUS_PHASE -+ || pcd->ep0state == EP0_IN_DATA_PHASE)) { -+ DWC_WRITE_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepint, diepint0.d32); -+ } -+ -+ status.d32 = core_if->dev_if->setup_desc_addr[core_if-> -+ dev_if->setup_desc_index]->status.d32; -+ -+ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len -+ && (pcd->ep0state == EP0_OUT_DATA_PHASE)) -+ status.d32 = core_if->dev_if->out_desc_addr->status.d32; -+ if (pcd->ep0state == EP0_OUT_STATUS_PHASE) -+ status.d32 = core_if->dev_if-> -+ out_desc_addr->status.d32; -+ -+ if (status.b.sr) { -+ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n"); -+ } else { -+ DWC_DEBUGPL(DBG_PCDV, "complete req!!\n"); -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len && -+ pcd->ep0state == EP0_OUT_DATA_PHASE) { -+ /* Read arrived setup packet from req->buf */ -+ dwc_memcpy(&pcd->setup_pkt->req, -+ req->buf + ep->dwc_ep.xfer_count, 8); -+ } -+ req->actual = ep->dwc_ep.xfer_count; -+ dwc_otg_request_done(ep, req, -ECONNRESET); -+ ep->dwc_ep.start_xfer_buff = 0; -+ ep->dwc_ep.xfer_buff = 0; -+ ep->dwc_ep.xfer_len = 0; -+ } -+ pcd->ep0state = EP0_IDLE; -+ if (doepint.b.setup) { -+ DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n"); -+ /* Data stage started, clear setup */ -+ CLEAR_OUT_EP_INTR(core_if, epnum, setup); -+ doepint.b.setup = 0; -+ handle_ep0(pcd); -+ /* Prepare for setup packets if ep0in was enabled*/ -+ if (pcd->ep0state == EP0_IN_STATUS_PHASE) { -+ ep0_out_start(core_if, pcd); -+ } -+ -+ goto exit_xfercompl; -+ } else { -+ /* Prepare for more setup packets */ -+ DWC_DEBUGPL(DBG_PCDV, -+ "EP0_IDLE SR=1 setup=0 new setup comes 2\n"); -+ ep0_out_start(core_if, pcd); -+ } -+ } -+ } -+ } -+ if (core_if->snpsid >= OTG_CORE_REV_2_94a && core_if->dma_enable -+ && core_if->dma_desc_enable == 0) { -+ doepint_data_t doepint_temp = {.d32 = 0}; -+ deptsiz0_data_t doeptsize0 = {.d32 = 0 }; -+ doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[ep->dwc_ep.num]->doepint); -+ doeptsize0.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[ep->dwc_ep.num]->doeptsiz); -+ if (pcd->ep0state == EP0_IDLE) { -+ if (doepint_temp.b.sr) { -+ CLEAR_OUT_EP_INTR(core_if, epnum, sr); -+ } -+ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[0]->doepint); -+ if (doeptsize0.b.supcnt == 3) { -+ DWC_DEBUGPL(DBG_ANY, "Rolling over!!!!!!!\n"); -+ ep->dwc_ep.stp_rollover = 1; -+ } -+ if (doepint.b.setup) { -+retry: -+ /* Already started data stage, clear setup */ -+ CLEAR_OUT_EP_INTR(core_if, epnum, setup); -+ doepint.b.setup = 0; -+ handle_ep0(pcd); -+ ep->dwc_ep.stp_rollover = 0; -+ /* Prepare for more setup packets */ -+ if (pcd->ep0state == EP0_IN_STATUS_PHASE || -+ pcd->ep0state == EP0_IN_DATA_PHASE) { -+ ep0_out_start(core_if, pcd); -+ } -+ goto exit_xfercompl; -+ } else { -+ /* Prepare for more setup packets */ -+ DWC_DEBUGPL(DBG_ANY, -+ "EP0_IDLE SR=1 setup=0 new setup comes\n"); -+ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[0]->doepint); -+ if(doepint.b.setup) -+ goto retry; -+ ep0_out_start(core_if, pcd); -+ } -+ } else { -+ dwc_otg_pcd_request_t *req; -+ diepint_data_t diepint0 = {.d32 = 0}; -+ doepint_data_t doepint_temp = {.d32 = 0}; -+ depctl_data_t diepctl0; -+ diepint0.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepint); -+ diepctl0.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepctl); -+ -+ if (pcd->ep0state == EP0_IN_DATA_PHASE -+ || pcd->ep0state == EP0_IN_STATUS_PHASE) { -+ if (diepint0.b.xfercompl) { -+ DWC_WRITE_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepint, diepint0.d32); -+ } -+ if (diepctl0.b.epena) { -+ diepint_data_t diepint = {.d32 = 0}; -+ diepctl0.b.snak = 1; -+ DWC_WRITE_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepctl, diepctl0.d32); -+ do { -+ dwc_udelay(10); -+ diepint.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepint); -+ } while (!diepint.b.inepnakeff); -+ diepint.b.inepnakeff = 1; -+ DWC_WRITE_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepint, diepint.d32); -+ diepctl0.d32 = 0; -+ diepctl0.b.epdis = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl, -+ diepctl0.d32); -+ do { -+ dwc_udelay(10); -+ diepint.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepint); -+ } while (!diepint.b.epdisabled); -+ diepint.b.epdisabled = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepint, -+ diepint.d32); -+ } -+ } -+ doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[ep->dwc_ep.num]->doepint); -+ if (doepint_temp.b.sr) { -+ CLEAR_OUT_EP_INTR(core_if, epnum, sr); -+ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n"); -+ } else { -+ DWC_DEBUGPL(DBG_PCDV, "complete req!!\n"); -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len && -+ pcd->ep0state == EP0_OUT_DATA_PHASE) { -+ /* Read arrived setup packet from req->buf */ -+ dwc_memcpy(&pcd->setup_pkt->req, -+ req->buf + ep->dwc_ep.xfer_count, 8); -+ } -+ req->actual = ep->dwc_ep.xfer_count; -+ dwc_otg_request_done(ep, req, -ECONNRESET); -+ ep->dwc_ep.start_xfer_buff = 0; -+ ep->dwc_ep.xfer_buff = 0; -+ ep->dwc_ep.xfer_len = 0; -+ } -+ pcd->ep0state = EP0_IDLE; -+ if (doepint.b.setup) { -+ DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n"); -+ /* Data stage started, clear setup */ -+ CLEAR_OUT_EP_INTR(core_if, epnum, setup); -+ doepint.b.setup = 0; -+ handle_ep0(pcd); -+ /* Prepare for setup packets if ep0in was enabled*/ -+ if (pcd->ep0state == EP0_IN_STATUS_PHASE) { -+ ep0_out_start(core_if, pcd); -+ } -+ goto exit_xfercompl; -+ } else { -+ /* Prepare for more setup packets */ -+ DWC_DEBUGPL(DBG_PCDV, -+ "EP0_IDLE SR=1 setup=0 new setup comes 2\n"); -+ ep0_out_start(core_if, pcd); -+ } -+ } -+ } -+ } -+ if (core_if->dma_enable == 0 || pcd->ep0state != EP0_IDLE) -+ handle_ep0(pcd); -+exit_xfercompl: -+ DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n", -+ dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep), doepint.d32); -+ } else { -+ if (core_if->dma_desc_enable == 0 -+ || pcd->ep0state != EP0_IDLE) -+ handle_ep0(pcd); -+ } -+#ifdef DWC_EN_ISOC -+ } else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ if (doepint.b.pktdrpsts == 0) { -+ /* Clear the bit in DOEPINTn for this interrupt */ -+ CLEAR_OUT_EP_INTR(core_if, -+ epnum, -+ xfercompl); -+ complete_iso_ep(pcd, ep); -+ } else { -+ -+ doepint_data_t doepint = {.d32 = 0 }; -+ doepint.b.xfercompl = 1; -+ doepint.b.pktdrpsts = 1; -+ DWC_WRITE_REG32 -+ (&core_if->dev_if->out_ep_regs -+ [epnum]->doepint, -+ doepint.d32); -+ if (handle_iso_out_pkt_dropped -+ (core_if, dwc_ep)) { -+ complete_iso_ep(pcd, -+ ep); -+ } -+ } -+#endif /* DWC_EN_ISOC */ -+#ifdef DWC_UTE_PER_IO -+ } else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl); -+ if (!ep->stopped) -+ complete_xiso_ep(ep); -+#endif /* DWC_UTE_PER_IO */ -+ } else { -+ /* Clear the bit in DOEPINTn for this interrupt */ -+ CLEAR_OUT_EP_INTR(core_if, epnum, -+ xfercompl); -+ -+ if (core_if->core_params->dev_out_nak) { -+ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[epnum]); -+ pcd->core_if->ep_xfer_info[epnum].state = 0; -+#ifdef DEBUG -+ print_memory_payload(pcd, dwc_ep); -+#endif -+ } -+ complete_ep(ep); -+ } -+ -+ } -+ -+ /* Endpoint disable */ -+ if (doepint.b.epdisabled) { -+ -+ /* Clear the bit in DOEPINTn for this interrupt */ -+ CLEAR_OUT_EP_INTR(core_if, epnum, epdisabled); -+ if (core_if->core_params->dev_out_nak) { -+#ifdef DEBUG -+ print_memory_payload(pcd, dwc_ep); -+#endif -+ /* In case of timeout condition */ -+ if (core_if->ep_xfer_info[epnum].state == 2) { -+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ dev_global_regs->dctl); -+ dctl.b.cgoutnak = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, -+ dctl.d32); -+ /* Unmask goutnakeff interrupt which was masked -+ * during handle nak out interrupt */ -+ gintmsk.b.goutnakeff = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, -+ 0, gintmsk.d32); -+ -+ complete_ep(ep); -+ } -+ } -+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) -+ { -+ dctl_data_t dctl; -+ gintmsk_data_t intr_mask = {.d32 = 0}; -+ dwc_otg_pcd_request_t *req = 0; -+ -+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ dev_global_regs->dctl); -+ dctl.b.cgoutnak = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, -+ dctl.d32); -+ -+ intr_mask.d32 = 0; -+ intr_mask.b.incomplisoout = 1; -+ -+ /* Get any pending requests */ -+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ if (!req) { -+ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep); -+ } else { -+ dwc_otg_request_done(ep, req, 0); -+ start_next_request(ep); -+ } -+ } else { -+ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep); -+ } -+ } -+ } -+ /* AHB Error */ -+ if (doepint.b.ahberr) { -+ DWC_ERROR("EP%d OUT AHB Error\n", epnum); -+ DWC_ERROR("EP%d DEPDMA=0x%08x \n", -+ epnum, core_if->dev_if->out_ep_regs[epnum]->doepdma); -+ CLEAR_OUT_EP_INTR(core_if, epnum, ahberr); -+ } -+ /* Setup Phase Done (contorl EPs) */ -+ if (doepint.b.setup) { -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCD, "EP%d SETUP Done\n", epnum); -+#endif -+ CLEAR_OUT_EP_INTR(core_if, epnum, setup); -+ -+ handle_ep0(pcd); -+ } -+ -+ /** OUT EP BNA Intr */ -+ if (doepint.b.bna) { -+ CLEAR_OUT_EP_INTR(core_if, epnum, bna); -+ if (core_if->dma_desc_enable) { -+#ifdef DWC_EN_ISOC -+ if (dwc_ep->type == -+ DWC_OTG_EP_TYPE_ISOC) { -+ /* -+ * This checking is performed to prevent first "false" BNA -+ * handling occuring right after reconnect -+ */ -+ if (dwc_ep->next_frame != -+ 0xffffffff) -+ dwc_otg_pcd_handle_iso_bna(ep); -+ } else -+#endif /* DWC_EN_ISOC */ -+ { -+ dwc_otg_pcd_handle_noniso_bna(ep); -+ } -+ } -+ } -+ /* Babble Interrupt */ -+ if (doepint.b.babble) { -+ DWC_DEBUGPL(DBG_ANY, "EP%d OUT Babble\n", -+ epnum); -+ handle_out_ep_babble_intr(pcd, epnum); -+ -+ CLEAR_OUT_EP_INTR(core_if, epnum, babble); -+ } -+ if (doepint.b.outtknepdis) { -+ DWC_DEBUGPL(DBG_ANY, "EP%d OUT Token received when EP is \ -+ disabled\n",epnum); -+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { -+ doepmsk_data_t doepmsk = {.d32 = 0}; -+ ep->dwc_ep.frame_num = core_if->frame_num; -+ if (ep->dwc_ep.bInterval > 1) { -+ depctl_data_t depctl; -+ depctl.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[epnum]->doepctl); -+ if (ep->dwc_ep.frame_num & 0x1) { -+ depctl.b.setd1pid = 1; -+ depctl.b.setd0pid = 0; -+ } else { -+ depctl.b.setd0pid = 1; -+ depctl.b.setd1pid = 0; -+ } -+ DWC_WRITE_REG32(&core_if->dev_if-> -+ out_ep_regs[epnum]->doepctl, depctl.d32); -+ } -+ start_next_request(ep); -+ doepmsk.b.outtknepdis = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, -+ doepmsk.d32, 0); -+ } -+ CLEAR_OUT_EP_INTR(core_if, epnum, outtknepdis); -+ } -+ -+ /* NAK Interrutp */ -+ if (doepint.b.nak) { -+ DWC_DEBUGPL(DBG_ANY, "EP%d OUT NAK\n", epnum); -+ handle_out_ep_nak_intr(pcd, epnum); -+ -+ CLEAR_OUT_EP_INTR(core_if, epnum, nak); -+ } -+ /* NYET Interrutp */ -+ if (doepint.b.nyet) { -+ DWC_DEBUGPL(DBG_ANY, "EP%d OUT NYET\n", epnum); -+ handle_out_ep_nyet_intr(pcd, epnum); -+ -+ CLEAR_OUT_EP_INTR(core_if, epnum, nyet); -+ } -+ } -+ -+ epnum++; -+ ep_intr >>= 1; -+ } -+ -+ return 1; -+ -+#undef CLEAR_OUT_EP_INTR -+} -+static int drop_transfer(uint32_t trgt_fr, uint32_t curr_fr, uint8_t frm_overrun) -+{ -+ int retval = 0; -+ if(!frm_overrun && curr_fr >= trgt_fr) -+ retval = 1; -+ else if (frm_overrun -+ && (curr_fr >= trgt_fr && ((curr_fr - trgt_fr) < 0x3FFF / 2))) -+ retval = 1; -+ return retval; -+} -+/** -+ * Incomplete ISO IN Transfer Interrupt. -+ * This interrupt indicates one of the following conditions occurred -+ * while transmitting an ISOC transaction. -+ * - Corrupted IN Token for ISOC EP. -+ * - Packet not complete in FIFO. -+ * The follow actions will be taken: -+ * -# Determine the EP -+ * -# Set incomplete flag in dwc_ep structure -+ * -# Disable EP; when "Endpoint Disabled" interrupt is received -+ * Flush FIFO -+ */ -+int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t * pcd) -+{ -+ gintsts_data_t gintsts; -+ -+#ifdef DWC_EN_ISOC -+ dwc_otg_dev_if_t *dev_if; -+ deptsiz_data_t deptsiz = {.d32 = 0 }; -+ depctl_data_t depctl = {.d32 = 0 }; -+ dsts_data_t dsts = {.d32 = 0 }; -+ dwc_ep_t *dwc_ep; -+ int i; -+ -+ dev_if = GET_CORE_IF(pcd)->dev_if; -+ -+ for (i = 1; i <= dev_if->num_in_eps; ++i) { -+ dwc_ep = &pcd->in_ep[i].dwc_ep; -+ if (dwc_ep->active && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ deptsiz.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz); -+ depctl.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ -+ if (depctl.b.epdis && deptsiz.d32) { -+ set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep); -+ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { -+ dwc_ep->cur_pkt = 0; -+ dwc_ep->proc_buf_num = -+ (dwc_ep->proc_buf_num ^ 1) & 0x1; -+ -+ if (dwc_ep->proc_buf_num) { -+ dwc_ep->cur_pkt_addr = -+ dwc_ep->xfer_buff1; -+ dwc_ep->cur_pkt_dma_addr = -+ dwc_ep->dma_addr1; -+ } else { -+ dwc_ep->cur_pkt_addr = -+ dwc_ep->xfer_buff0; -+ dwc_ep->cur_pkt_dma_addr = -+ dwc_ep->dma_addr0; -+ } -+ -+ } -+ -+ dsts.d32 = -+ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if-> -+ dev_global_regs->dsts); -+ dwc_ep->next_frame = dsts.b.soffn; -+ -+ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF -+ (pcd), -+ dwc_ep); -+ } -+ } -+ } -+ -+#else -+ depctl_data_t depctl = {.d32 = 0 }; -+ dwc_ep_t *dwc_ep; -+ dwc_otg_dev_if_t *dev_if; -+ int i; -+ dev_if = GET_CORE_IF(pcd)->dev_if; -+ -+ DWC_DEBUGPL(DBG_PCD,"Incomplete ISO IN \n"); -+ -+ for (i = 1; i <= dev_if->num_in_eps; ++i) { -+ dwc_ep = &pcd->in_ep[i-1].dwc_ep; -+ depctl.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ if (depctl.b.epena && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ if (drop_transfer(dwc_ep->frame_num, GET_CORE_IF(pcd)->frame_num, -+ dwc_ep->frm_overrun)) -+ { -+ depctl.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ depctl.b.snak = 1; -+ depctl.b.epdis = 1; -+ DWC_MODIFY_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32, depctl.d32); -+ } -+ } -+ } -+ -+ /*intr_mask.b.incomplisoin = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, -+ intr_mask.d32, 0); */ -+#endif //DWC_EN_ISOC -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.incomplisoin = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * Incomplete ISO OUT Transfer Interrupt. -+ * -+ * This interrupt indicates that the core has dropped an ISO OUT -+ * packet. The following conditions can be the cause: -+ * - FIFO Full, the entire packet would not fit in the FIFO. -+ * - CRC Error -+ * - Corrupted Token -+ * The follow actions will be taken: -+ * -# Determine the EP -+ * -# Set incomplete flag in dwc_ep structure -+ * -# Read any data from the FIFO -+ * -# Disable EP. When "Endpoint Disabled" interrupt is received -+ * re-enable EP. -+ */ -+int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t * pcd) -+{ -+ -+ gintsts_data_t gintsts; -+ -+#ifdef DWC_EN_ISOC -+ dwc_otg_dev_if_t *dev_if; -+ deptsiz_data_t deptsiz = {.d32 = 0 }; -+ depctl_data_t depctl = {.d32 = 0 }; -+ dsts_data_t dsts = {.d32 = 0 }; -+ dwc_ep_t *dwc_ep; -+ int i; -+ -+ dev_if = GET_CORE_IF(pcd)->dev_if; -+ -+ for (i = 1; i <= dev_if->num_out_eps; ++i) { -+ dwc_ep = &pcd->in_ep[i].dwc_ep; -+ if (pcd->out_ep[i].dwc_ep.active && -+ pcd->out_ep[i].dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { -+ deptsiz.d32 = -+ DWC_READ_REG32(&dev_if->out_ep_regs[i]->doeptsiz); -+ depctl.d32 = -+ DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl); -+ -+ if (depctl.b.epdis && deptsiz.d32) { -+ set_current_pkt_info(GET_CORE_IF(pcd), -+ &pcd->out_ep[i].dwc_ep); -+ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { -+ dwc_ep->cur_pkt = 0; -+ dwc_ep->proc_buf_num = -+ (dwc_ep->proc_buf_num ^ 1) & 0x1; -+ -+ if (dwc_ep->proc_buf_num) { -+ dwc_ep->cur_pkt_addr = -+ dwc_ep->xfer_buff1; -+ dwc_ep->cur_pkt_dma_addr = -+ dwc_ep->dma_addr1; -+ } else { -+ dwc_ep->cur_pkt_addr = -+ dwc_ep->xfer_buff0; -+ dwc_ep->cur_pkt_dma_addr = -+ dwc_ep->dma_addr0; -+ } -+ -+ } -+ -+ dsts.d32 = -+ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if-> -+ dev_global_regs->dsts); -+ dwc_ep->next_frame = dsts.b.soffn; -+ -+ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF -+ (pcd), -+ dwc_ep); -+ } -+ } -+ } -+#else -+ /** @todo implement ISR */ -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ dwc_otg_core_if_t *core_if; -+ deptsiz_data_t deptsiz = {.d32 = 0 }; -+ depctl_data_t depctl = {.d32 = 0 }; -+ dctl_data_t dctl = {.d32 = 0 }; -+ dwc_ep_t *dwc_ep = NULL; -+ int i; -+ core_if = GET_CORE_IF(pcd); -+ -+ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { -+ dwc_ep = &pcd->out_ep[i].dwc_ep; -+ depctl.d32 = -+ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl); -+ if (depctl.b.epena && depctl.b.dpid == (core_if->frame_num & 0x1)) { -+ core_if->dev_if->isoc_ep = dwc_ep; -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz); -+ break; -+ } -+ } -+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ intr_mask.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); -+ -+ if (!intr_mask.b.goutnakeff) { -+ /* Unmask it */ -+ intr_mask.b.goutnakeff = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32); -+ } -+ if (!gintsts.b.goutnakeff) { -+ dctl.b.sgoutnak = 1; -+ } -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); -+ -+ depctl.d32 = DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl); -+ if (depctl.b.epena) { -+ depctl.b.epdis = 1; -+ depctl.b.snak = 1; -+ } -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl, depctl.d32); -+ -+ intr_mask.d32 = 0; -+ intr_mask.b.incomplisoout = 1; -+ -+#endif /* DWC_EN_ISOC */ -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.incomplisoout = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * This function handles the Global IN NAK Effective interrupt. -+ * -+ */ -+int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; -+ depctl_data_t diepctl = {.d32 = 0 }; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ gintsts_data_t gintsts; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ int i; -+ -+ DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n"); -+ -+ /* Disable all active IN EPs */ -+ for (i = 0; i <= dev_if->num_in_eps; i++) { -+ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ if (!(diepctl.b.eptype & 1) && diepctl.b.epena) { -+ if (core_if->start_predict > 0) -+ core_if->start_predict++; -+ diepctl.b.epdis = 1; -+ diepctl.b.snak = 1; -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, diepctl.d32); -+ } -+ } -+ -+ -+ /* Disable the Global IN NAK Effective Interrupt */ -+ intr_mask.b.ginnakeff = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, -+ intr_mask.d32, 0); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.ginnakeff = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * OUT NAK Effective. -+ * -+ */ -+int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ gintsts_data_t gintsts; -+ depctl_data_t doepctl; -+ int i; -+ -+ /* Disable the Global OUT NAK Effective Interrupt */ -+ intr_mask.b.goutnakeff = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, -+ intr_mask.d32, 0); -+ -+ /* If DEV OUT NAK enabled*/ -+ if (pcd->core_if->core_params->dev_out_nak) { -+ /* Run over all out endpoints to determine the ep number on -+ * which the timeout has happened -+ */ -+ for (i = 0; i <= dev_if->num_out_eps; i++) { -+ if ( pcd->core_if->ep_xfer_info[i].state == 2 ) -+ break; -+ } -+ if (i > dev_if->num_out_eps) { -+ dctl_data_t dctl; -+ dctl.d32 = -+ DWC_READ_REG32(&dev_if->dev_global_regs->dctl); -+ dctl.b.cgoutnak = 1; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl, -+ dctl.d32); -+ goto out; -+ } -+ -+ /* Disable the endpoint */ -+ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl); -+ if (doepctl.b.epena) { -+ doepctl.b.epdis = 1; -+ doepctl.b.snak = 1; -+ } -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32); -+ return 1; -+ } -+ /* We come here from Incomplete ISO OUT handler */ -+ if (dev_if->isoc_ep) { -+ dwc_ep_t *dwc_ep = (dwc_ep_t *)dev_if->isoc_ep; -+ uint32_t epnum = dwc_ep->num; -+ doepint_data_t doepint; -+ doepint.d32 = -+ DWC_READ_REG32(&dev_if->out_ep_regs[dwc_ep->num]->doepint); -+ dev_if->isoc_ep = NULL; -+ doepctl.d32 = -+ DWC_READ_REG32(&dev_if->out_ep_regs[epnum]->doepctl); -+ DWC_PRINTF("Before disable DOEPCTL = %08x\n", doepctl.d32); -+ if (doepctl.b.epena) { -+ doepctl.b.epdis = 1; -+ doepctl.b.snak = 1; -+ } -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[epnum]->doepctl, -+ doepctl.d32); -+ return 1; -+ } else -+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", -+ "Global OUT NAK Effective\n"); -+ -+out: -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.goutnakeff = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * PCD interrupt handler. -+ * -+ * The PCD handles the device interrupts. Many conditions can cause a -+ * device interrupt. When an interrupt occurs, the device interrupt -+ * service routine determines the cause of the interrupt and -+ * dispatches handling to the appropriate function. These interrupt -+ * handling functions are described below. -+ * -+ * All interrupt registers are processed from LSB to MSB. -+ * -+ */ -+int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+#ifdef VERBOSE -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+#endif -+ gintsts_data_t gintr_status; -+ int32_t retval = 0; -+ -+ /* Exit from ISR if core is hibernated */ -+ if (core_if->hibernation_suspend == 1) { -+ return retval; -+ } -+#ifdef VERBOSE -+ DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x gintmsk=%08x\n", -+ __func__, -+ DWC_READ_REG32(&global_regs->gintsts), -+ DWC_READ_REG32(&global_regs->gintmsk)); -+#endif -+ -+ if (dwc_otg_is_device_mode(core_if)) { -+ DWC_SPINLOCK(pcd->lock); -+#ifdef VERBOSE -+ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x gintmsk=%08x\n", -+ __func__, -+ DWC_READ_REG32(&global_regs->gintsts), -+ DWC_READ_REG32(&global_regs->gintmsk)); -+#endif -+ -+ gintr_status.d32 = dwc_otg_read_core_intr(core_if); -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n", -+ __func__, gintr_status.d32); -+ -+ if (gintr_status.b.sofintr) { -+ retval |= dwc_otg_pcd_handle_sof_intr(pcd); -+ } -+ if (gintr_status.b.rxstsqlvl) { -+ retval |= -+ dwc_otg_pcd_handle_rx_status_q_level_intr(pcd); -+ } -+ if (gintr_status.b.nptxfempty) { -+ retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd); -+ } -+ if (gintr_status.b.goutnakeff) { -+ retval |= dwc_otg_pcd_handle_out_nak_effective(pcd); -+ } -+ if (gintr_status.b.i2cintr) { -+ retval |= dwc_otg_pcd_handle_i2c_intr(pcd); -+ } -+ if (gintr_status.b.erlysuspend) { -+ retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd); -+ } -+ if (gintr_status.b.usbreset) { -+ retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd); -+ } -+ if (gintr_status.b.enumdone) { -+ retval |= dwc_otg_pcd_handle_enum_done_intr(pcd); -+ } -+ if (gintr_status.b.isooutdrop) { -+ retval |= -+ dwc_otg_pcd_handle_isoc_out_packet_dropped_intr -+ (pcd); -+ } -+ if (gintr_status.b.eopframe) { -+ retval |= -+ dwc_otg_pcd_handle_end_periodic_frame_intr(pcd); -+ } -+ if (gintr_status.b.inepint) { -+ if (!core_if->multiproc_int_enable) { -+ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd); -+ } -+ } -+ if (gintr_status.b.outepintr) { -+ if (!core_if->multiproc_int_enable) { -+ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd); -+ } -+ } -+ if (gintr_status.b.epmismatch) { -+ retval |= dwc_otg_pcd_handle_ep_mismatch_intr(pcd); -+ } -+ if (gintr_status.b.fetsusp) { -+ retval |= dwc_otg_pcd_handle_ep_fetsusp_intr(pcd); -+ } -+ if (gintr_status.b.ginnakeff) { -+ retval |= dwc_otg_pcd_handle_in_nak_effective(pcd); -+ } -+ if (gintr_status.b.incomplisoin) { -+ retval |= -+ dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd); -+ } -+ if (gintr_status.b.incomplisoout) { -+ retval |= -+ dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd); -+ } -+ -+ /* In MPI mode Device Endpoints interrupts are asserted -+ * without setting outepintr and inepint bits set, so these -+ * Interrupt handlers are called without checking these bit-fields -+ */ -+ if (core_if->multiproc_int_enable) { -+ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd); -+ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd); -+ } -+#ifdef VERBOSE -+ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__, -+ DWC_READ_REG32(&global_regs->gintsts)); -+#endif -+ DWC_SPINUNLOCK(pcd->lock); -+ } -+ return retval; -+} -+ -+#endif /* DWC_HOST_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c -@@ -0,0 +1,1280 @@ -+ /* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_linux.c $ -+ * $Revision: #21 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_HOST_ONLY -+ -+/** @file -+ * This file implements the Peripheral Controller Driver. -+ * -+ * The Peripheral Controller Driver (PCD) is responsible for -+ * translating requests from the Function Driver into the appropriate -+ * actions on the DWC_otg controller. It isolates the Function Driver -+ * from the specifics of the controller by providing an API to the -+ * Function Driver. -+ * -+ * The Peripheral Controller Driver for Linux will implement the -+ * Gadget API, so that the existing Gadget drivers can be used. -+ * (Gadget Driver is the Linux terminology for a Function Driver.) -+ * -+ * The Linux Gadget API is defined in the header file -+ * . The USB EP operations API is -+ * defined in the structure usb_ep_ops and the USB -+ * Controller API is defined in the structure -+ * usb_gadget_ops. -+ * -+ */ -+ -+#include "dwc_otg_os_dep.h" -+#include "dwc_otg_pcd_if.h" -+#include "dwc_otg_pcd.h" -+#include "dwc_otg_driver.h" -+#include "dwc_otg_dbg.h" -+ -+extern bool fiq_enable; -+ -+static struct gadget_wrapper { -+ dwc_otg_pcd_t *pcd; -+ -+ struct usb_gadget gadget; -+ struct usb_gadget_driver *driver; -+ -+ struct usb_ep ep0; -+ struct usb_ep in_ep[16]; -+ struct usb_ep out_ep[16]; -+ -+} *gadget_wrapper; -+ -+/* Display the contents of the buffer */ -+extern void dump_msg(const u8 * buf, unsigned int length); -+/** -+ * Get the dwc_otg_pcd_ep_t* from usb_ep* pointer - NULL in case -+ * if the endpoint is not found -+ */ -+static struct dwc_otg_pcd_ep *ep_from_handle(dwc_otg_pcd_t * pcd, void *handle) -+{ -+ int i; -+ if (pcd->ep0.priv == handle) { -+ return &pcd->ep0; -+ } -+ -+ for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) { -+ if (pcd->in_ep[i].priv == handle) -+ return &pcd->in_ep[i]; -+ if (pcd->out_ep[i].priv == handle) -+ return &pcd->out_ep[i]; -+ } -+ -+ return NULL; -+} -+ -+/* USB Endpoint Operations */ -+/* -+ * The following sections briefly describe the behavior of the Gadget -+ * API endpoint operations implemented in the DWC_otg driver -+ * software. Detailed descriptions of the generic behavior of each of -+ * these functions can be found in the Linux header file -+ * include/linux/usb_gadget.h. -+ * -+ * The Gadget API provides wrapper functions for each of the function -+ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper -+ * function, which then calls the underlying PCD function. The -+ * following sections are named according to the wrapper -+ * functions. Within each section, the corresponding DWC_otg PCD -+ * function name is specified. -+ * -+ */ -+ -+/** -+ * This function is called by the Gadget Driver for each EP to be -+ * configured for the current configuration (SET_CONFIGURATION). -+ * -+ * This function initializes the dwc_otg_ep_t data structure, and then -+ * calls dwc_otg_ep_activate. -+ */ -+static int ep_enable(struct usb_ep *usb_ep, -+ const struct usb_endpoint_descriptor *ep_desc) -+{ -+ int retval; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, ep_desc); -+ -+ if (!usb_ep || !ep_desc || ep_desc->bDescriptorType != USB_DT_ENDPOINT) { -+ DWC_WARN("%s, bad ep or descriptor\n", __func__); -+ return -EINVAL; -+ } -+ if (usb_ep == &gadget_wrapper->ep0) { -+ DWC_WARN("%s, bad ep(0)\n", __func__); -+ return -EINVAL; -+ } -+ -+ /* Check FIFO size? */ -+ if (!ep_desc->wMaxPacketSize) { -+ DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name); -+ return -ERANGE; -+ } -+ -+ if (!gadget_wrapper->driver || -+ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { -+ DWC_WARN("%s, bogus device state\n", __func__); -+ return -ESHUTDOWN; -+ } -+ -+ /* Delete after check - MAS */ -+#if 0 -+ nat = (uint32_t) ep_desc->wMaxPacketSize; -+ printk(KERN_ALERT "%s: nat (before) =%d\n", __func__, nat); -+ nat = (nat >> 11) & 0x03; -+ printk(KERN_ALERT "%s: nat (after) =%d\n", __func__, nat); -+#endif -+ retval = dwc_otg_pcd_ep_enable(gadget_wrapper->pcd, -+ (const uint8_t *)ep_desc, -+ (void *)usb_ep); -+ if (retval) { -+ DWC_WARN("dwc_otg_pcd_ep_enable failed\n"); -+ return -EINVAL; -+ } -+ -+ usb_ep->maxpacket = le16_to_cpu(ep_desc->wMaxPacketSize); -+ -+ return 0; -+} -+ -+/** -+ * This function is called when an EP is disabled due to disconnect or -+ * change in configuration. Any pending requests will terminate with a -+ * status of -ESHUTDOWN. -+ * -+ * This function modifies the dwc_otg_ep_t data structure for this EP, -+ * and then calls dwc_otg_ep_deactivate. -+ */ -+static int ep_disable(struct usb_ep *usb_ep) -+{ -+ int retval; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, usb_ep); -+ if (!usb_ep) { -+ DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__, -+ usb_ep ? usb_ep->name : NULL); -+ return -EINVAL; -+ } -+ -+ retval = dwc_otg_pcd_ep_disable(gadget_wrapper->pcd, usb_ep); -+ if (retval) { -+ retval = -EINVAL; -+ } -+ -+ return retval; -+} -+ -+/** -+ * This function allocates a request object to use with the specified -+ * endpoint. -+ * -+ * @param ep The endpoint to be used with with the request -+ * @param gfp_flags the GFP_* flags to use. -+ */ -+static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep, -+ gfp_t gfp_flags) -+{ -+ struct usb_request *usb_req; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d)\n", __func__, ep, gfp_flags); -+ if (0 == ep) { -+ DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n"); -+ return 0; -+ } -+ usb_req = kzalloc(sizeof(*usb_req), gfp_flags); -+ if (0 == usb_req) { -+ DWC_WARN("%s() %s\n", __func__, "request allocation failed!\n"); -+ return 0; -+ } -+ usb_req->dma = DWC_DMA_ADDR_INVALID; -+ -+ return usb_req; -+} -+ -+/** -+ * This function frees a request object. -+ * -+ * @param ep The endpoint associated with the request -+ * @param req The request being freed -+ */ -+static void dwc_otg_pcd_free_request(struct usb_ep *ep, struct usb_request *req) -+{ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, ep, req); -+ -+ if (0 == ep || 0 == req) { -+ DWC_WARN("%s() %s\n", __func__, -+ "Invalid ep or req argument!\n"); -+ return; -+ } -+ -+ kfree(req); -+} -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+/** -+ * This function allocates an I/O buffer to be used for a transfer -+ * to/from the specified endpoint. -+ * -+ * @param usb_ep The endpoint to be used with with the request -+ * @param bytes The desired number of bytes for the buffer -+ * @param dma Pointer to the buffer's DMA address; must be valid -+ * @param gfp_flags the GFP_* flags to use. -+ * @return address of a new buffer or null is buffer could not be allocated. -+ */ -+static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes, -+ dma_addr_t * dma, gfp_t gfp_flags) -+{ -+ void *buf; -+ dwc_otg_pcd_t *pcd = 0; -+ -+ pcd = gadget_wrapper->pcd; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes, -+ dma, gfp_flags); -+ -+ /* Check dword alignment */ -+ if ((bytes & 0x3UL) != 0) { -+ DWC_WARN("%s() Buffer size is not a multiple of" -+ "DWORD size (%d)", __func__, bytes); -+ } -+ -+ buf = dma_alloc_coherent(NULL, bytes, dma, gfp_flags); -+ WARN_ON(!buf); -+ -+ /* Check dword alignment */ -+ if (((int)buf & 0x3UL) != 0) { -+ DWC_WARN("%s() Buffer is not DWORD aligned (%p)", -+ __func__, buf); -+ } -+ -+ return buf; -+} -+ -+/** -+ * This function frees an I/O buffer that was allocated by alloc_buffer. -+ * -+ * @param usb_ep the endpoint associated with the buffer -+ * @param buf address of the buffer -+ * @param dma The buffer's DMA address -+ * @param bytes The number of bytes of the buffer -+ */ -+static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf, -+ dma_addr_t dma, unsigned bytes) -+{ -+ dwc_otg_pcd_t *pcd = 0; -+ -+ pcd = gadget_wrapper->pcd; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%0x,%d)\n", __func__, buf, dma, bytes); -+ -+ dma_free_coherent(NULL, bytes, buf, dma); -+} -+#endif -+ -+/** -+ * This function is used to submit an I/O Request to an EP. -+ * -+ * - When the request completes the request's completion callback -+ * is called to return the request to the driver. -+ * - An EP, except control EPs, may have multiple requests -+ * pending. -+ * - Once submitted the request cannot be examined or modified. -+ * - Each request is turned into one or more packets. -+ * - A BULK EP can queue any amount of data; the transfer is -+ * packetized. -+ * - Zero length Packets are specified with the request 'zero' -+ * flag. -+ */ -+static int ep_queue(struct usb_ep *usb_ep, struct usb_request *usb_req, -+ gfp_t gfp_flags) -+{ -+ dwc_otg_pcd_t *pcd; -+ struct dwc_otg_pcd_ep *ep = NULL; -+ int retval = 0, is_isoc_ep = 0; -+ dma_addr_t dma_addr = DWC_DMA_ADDR_INVALID; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p,%d)\n", -+ __func__, usb_ep, usb_req, gfp_flags); -+ -+ if (!usb_req || !usb_req->complete || !usb_req->buf) { -+ DWC_WARN("bad params\n"); -+ return -EINVAL; -+ } -+ -+ if (!usb_ep) { -+ DWC_WARN("bad ep\n"); -+ return -EINVAL; -+ } -+ -+ pcd = gadget_wrapper->pcd; -+ if (!gadget_wrapper->driver || -+ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { -+ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", -+ gadget_wrapper->gadget.speed); -+ DWC_WARN("bogus device state\n"); -+ return -ESHUTDOWN; -+ } -+ -+ DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n", -+ usb_ep->name, usb_req, usb_req->length, usb_req->buf); -+ -+ usb_req->status = -EINPROGRESS; -+ usb_req->actual = 0; -+ -+ ep = ep_from_handle(pcd, usb_ep); -+ if (ep == NULL) -+ is_isoc_ep = 0; -+ else -+ is_isoc_ep = (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) ? 1 : 0; -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+ dma_addr = usb_req->dma; -+#else -+ if (GET_CORE_IF(pcd)->dma_enable) { -+ dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev; -+ struct device *dev = NULL; -+ -+ if (otg_dev != NULL) -+ dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep); -+ -+ if (usb_req->length != 0 && -+ usb_req->dma == DWC_DMA_ADDR_INVALID) { -+ dma_addr = dma_map_single(dev, usb_req->buf, -+ usb_req->length, -+ ep->dwc_ep.is_in ? -+ DMA_TO_DEVICE: -+ DMA_FROM_DEVICE); -+ } -+ } -+#endif -+ -+#ifdef DWC_UTE_PER_IO -+ if (is_isoc_ep == 1) { -+ retval = dwc_otg_pcd_xiso_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr, -+ usb_req->length, usb_req->zero, usb_req, -+ gfp_flags == GFP_ATOMIC ? 1 : 0, &usb_req->ext_req); -+ if (retval) -+ return -EINVAL; -+ -+ return 0; -+ } -+#endif -+ retval = dwc_otg_pcd_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr, -+ usb_req->length, usb_req->zero, usb_req, -+ gfp_flags == GFP_ATOMIC ? 1 : 0); -+ if (retval) { -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+/** -+ * This function cancels an I/O request from an EP. -+ */ -+static int ep_dequeue(struct usb_ep *usb_ep, struct usb_request *usb_req) -+{ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, usb_req); -+ -+ if (!usb_ep || !usb_req) { -+ DWC_WARN("bad argument\n"); -+ return -EINVAL; -+ } -+ if (!gadget_wrapper->driver || -+ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { -+ DWC_WARN("bogus device state\n"); -+ return -ESHUTDOWN; -+ } -+ if (dwc_otg_pcd_ep_dequeue(gadget_wrapper->pcd, usb_ep, usb_req)) { -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+/** -+ * usb_ep_set_halt stalls an endpoint. -+ * -+ * usb_ep_clear_halt clears an endpoint halt and resets its data -+ * toggle. -+ * -+ * Both of these functions are implemented with the same underlying -+ * function. The behavior depends on the value argument. -+ * -+ * @param[in] usb_ep the Endpoint to halt or clear halt. -+ * @param[in] value -+ * - 0 means clear_halt. -+ * - 1 means set_halt, -+ * - 2 means clear stall lock flag. -+ * - 3 means set stall lock flag. -+ */ -+static int ep_halt(struct usb_ep *usb_ep, int value) -+{ -+ int retval = 0; -+ -+ DWC_DEBUGPL(DBG_PCD, "HALT %s %d\n", usb_ep->name, value); -+ -+ if (!usb_ep) { -+ DWC_WARN("bad ep\n"); -+ return -EINVAL; -+ } -+ -+ retval = dwc_otg_pcd_ep_halt(gadget_wrapper->pcd, usb_ep, value); -+ if (retval == -DWC_E_AGAIN) { -+ return -EAGAIN; -+ } else if (retval) { -+ retval = -EINVAL; -+ } -+ -+ return retval; -+} -+ -+//#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)) -+#if 0 -+/** -+ * ep_wedge: sets the halt feature and ignores clear requests -+ * -+ * @usb_ep: the endpoint being wedged -+ * -+ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT) -+ * requests. If the gadget driver clears the halt status, it will -+ * automatically unwedge the endpoint. -+ * -+ * Returns zero on success, else negative errno. * -+ * Check usb_ep_set_wedge() at "usb_gadget.h" for details -+ */ -+static int ep_wedge(struct usb_ep *usb_ep) -+{ -+ int retval = 0; -+ -+ DWC_DEBUGPL(DBG_PCD, "WEDGE %s\n", usb_ep->name); -+ -+ if (!usb_ep) { -+ DWC_WARN("bad ep\n"); -+ return -EINVAL; -+ } -+ -+ retval = dwc_otg_pcd_ep_wedge(gadget_wrapper->pcd, usb_ep); -+ if (retval == -DWC_E_AGAIN) { -+ retval = -EAGAIN; -+ } else if (retval) { -+ retval = -EINVAL; -+ } -+ -+ return retval; -+} -+#endif -+ -+#ifdef DWC_EN_ISOC -+/** -+ * This function is used to submit an ISOC Transfer Request to an EP. -+ * -+ * - Every time a sync period completes the request's completion callback -+ * is called to provide data to the gadget driver. -+ * - Once submitted the request cannot be modified. -+ * - Each request is turned into periodic data packets untill ISO -+ * Transfer is stopped.. -+ */ -+static int iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req, -+ gfp_t gfp_flags) -+{ -+ int retval = 0; -+ -+ if (!req || !req->process_buffer || !req->buf0 || !req->buf1) { -+ DWC_WARN("bad params\n"); -+ return -EINVAL; -+ } -+ -+ if (!usb_ep) { -+ DWC_PRINTF("bad params\n"); -+ return -EINVAL; -+ } -+ -+ req->status = -EINPROGRESS; -+ -+ retval = -+ dwc_otg_pcd_iso_ep_start(gadget_wrapper->pcd, usb_ep, req->buf0, -+ req->buf1, req->dma0, req->dma1, -+ req->sync_frame, req->data_pattern_frame, -+ req->data_per_frame, -+ req-> -+ flags & USB_REQ_ISO_ASAP ? -1 : -+ req->start_frame, req->buf_proc_intrvl, -+ req, gfp_flags == GFP_ATOMIC ? 1 : 0); -+ -+ if (retval) { -+ return -EINVAL; -+ } -+ -+ return retval; -+} -+ -+/** -+ * This function stops ISO EP Periodic Data Transfer. -+ */ -+static int iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req) -+{ -+ int retval = 0; -+ if (!usb_ep) { -+ DWC_WARN("bad ep\n"); -+ } -+ -+ if (!gadget_wrapper->driver || -+ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { -+ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", -+ gadget_wrapper->gadget.speed); -+ DWC_WARN("bogus device state\n"); -+ } -+ -+ dwc_otg_pcd_iso_ep_stop(gadget_wrapper->pcd, usb_ep, req); -+ if (retval) { -+ retval = -EINVAL; -+ } -+ -+ return retval; -+} -+ -+static struct usb_iso_request *alloc_iso_request(struct usb_ep *ep, -+ int packets, gfp_t gfp_flags) -+{ -+ struct usb_iso_request *pReq = NULL; -+ uint32_t req_size; -+ -+ req_size = sizeof(struct usb_iso_request); -+ req_size += -+ (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor))); -+ -+ pReq = kmalloc(req_size, gfp_flags); -+ if (!pReq) { -+ DWC_WARN("Can't allocate Iso Request\n"); -+ return 0; -+ } -+ pReq->iso_packet_desc0 = (void *)(pReq + 1); -+ -+ pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets; -+ -+ return pReq; -+} -+ -+static void free_iso_request(struct usb_ep *ep, struct usb_iso_request *req) -+{ -+ kfree(req); -+} -+ -+static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops = { -+ .ep_ops = { -+ .enable = ep_enable, -+ .disable = ep_disable, -+ -+ .alloc_request = dwc_otg_pcd_alloc_request, -+ .free_request = dwc_otg_pcd_free_request, -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+ .alloc_buffer = dwc_otg_pcd_alloc_buffer, -+ .free_buffer = dwc_otg_pcd_free_buffer, -+#endif -+ -+ .queue = ep_queue, -+ .dequeue = ep_dequeue, -+ -+ .set_halt = ep_halt, -+ .fifo_status = 0, -+ .fifo_flush = 0, -+ }, -+ .iso_ep_start = iso_ep_start, -+ .iso_ep_stop = iso_ep_stop, -+ .alloc_iso_request = alloc_iso_request, -+ .free_iso_request = free_iso_request, -+}; -+ -+#else -+ -+ int (*enable) (struct usb_ep *ep, -+ const struct usb_endpoint_descriptor *desc); -+ int (*disable) (struct usb_ep *ep); -+ -+ struct usb_request *(*alloc_request) (struct usb_ep *ep, -+ gfp_t gfp_flags); -+ void (*free_request) (struct usb_ep *ep, struct usb_request *req); -+ -+ int (*queue) (struct usb_ep *ep, struct usb_request *req, -+ gfp_t gfp_flags); -+ int (*dequeue) (struct usb_ep *ep, struct usb_request *req); -+ -+ int (*set_halt) (struct usb_ep *ep, int value); -+ int (*set_wedge) (struct usb_ep *ep); -+ -+ int (*fifo_status) (struct usb_ep *ep); -+ void (*fifo_flush) (struct usb_ep *ep); -+static struct usb_ep_ops dwc_otg_pcd_ep_ops = { -+ .enable = ep_enable, -+ .disable = ep_disable, -+ -+ .alloc_request = dwc_otg_pcd_alloc_request, -+ .free_request = dwc_otg_pcd_free_request, -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+ .alloc_buffer = dwc_otg_pcd_alloc_buffer, -+ .free_buffer = dwc_otg_pcd_free_buffer, -+#else -+ /* .set_wedge = ep_wedge, */ -+ .set_wedge = NULL, /* uses set_halt instead */ -+#endif -+ -+ .queue = ep_queue, -+ .dequeue = ep_dequeue, -+ -+ .set_halt = ep_halt, -+ .fifo_status = 0, -+ .fifo_flush = 0, -+ -+}; -+ -+#endif /* _EN_ISOC_ */ -+/* Gadget Operations */ -+/** -+ * The following gadget operations will be implemented in the DWC_otg -+ * PCD. Functions in the API that are not described below are not -+ * implemented. -+ * -+ * The Gadget API provides wrapper functions for each of the function -+ * pointers defined in usb_gadget_ops. The Gadget Driver calls the -+ * wrapper function, which then calls the underlying PCD function. The -+ * following sections are named according to the wrapper functions -+ * (except for ioctl, which doesn't have a wrapper function). Within -+ * each section, the corresponding DWC_otg PCD function name is -+ * specified. -+ * -+ */ -+ -+/** -+ *Gets the USB Frame number of the last SOF. -+ */ -+static int get_frame_number(struct usb_gadget *gadget) -+{ -+ struct gadget_wrapper *d; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget); -+ -+ if (gadget == 0) { -+ return -ENODEV; -+ } -+ -+ d = container_of(gadget, struct gadget_wrapper, gadget); -+ return dwc_otg_pcd_get_frame_number(d->pcd); -+} -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+static int test_lpm_enabled(struct usb_gadget *gadget) -+{ -+ struct gadget_wrapper *d; -+ -+ d = container_of(gadget, struct gadget_wrapper, gadget); -+ -+ return dwc_otg_pcd_is_lpm_enabled(d->pcd); -+} -+#endif -+ -+/** -+ * Initiates Session Request Protocol (SRP) to wakeup the host if no -+ * session is in progress. If a session is already in progress, but -+ * the device is suspended, remote wakeup signaling is started. -+ * -+ */ -+static int wakeup(struct usb_gadget *gadget) -+{ -+ struct gadget_wrapper *d; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget); -+ -+ if (gadget == 0) { -+ return -ENODEV; -+ } else { -+ d = container_of(gadget, struct gadget_wrapper, gadget); -+ } -+ dwc_otg_pcd_wakeup(d->pcd); -+ return 0; -+} -+ -+static const struct usb_gadget_ops dwc_otg_pcd_ops = { -+ .get_frame = get_frame_number, -+ .wakeup = wakeup, -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ .lpm_support = test_lpm_enabled, -+#endif -+ // current versions must always be self-powered -+}; -+ -+static int _setup(dwc_otg_pcd_t * pcd, uint8_t * bytes) -+{ -+ int retval = -DWC_E_NOT_SUPPORTED; -+ if (gadget_wrapper->driver && gadget_wrapper->driver->setup) { -+ retval = gadget_wrapper->driver->setup(&gadget_wrapper->gadget, -+ (struct usb_ctrlrequest -+ *)bytes); -+ } -+ -+ if (retval == -ENOTSUPP) { -+ retval = -DWC_E_NOT_SUPPORTED; -+ } else if (retval < 0) { -+ retval = -DWC_E_INVALID; -+ } -+ -+ return retval; -+} -+ -+#ifdef DWC_EN_ISOC -+static int _isoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle, int proc_buf_num) -+{ -+ int i, packet_count; -+ struct usb_gadget_iso_packet_descriptor *iso_packet = 0; -+ struct usb_iso_request *iso_req = req_handle; -+ -+ if (proc_buf_num) { -+ iso_packet = iso_req->iso_packet_desc1; -+ } else { -+ iso_packet = iso_req->iso_packet_desc0; -+ } -+ packet_count = -+ dwc_otg_pcd_get_iso_packet_count(pcd, ep_handle, req_handle); -+ for (i = 0; i < packet_count; ++i) { -+ int status; -+ int actual; -+ int offset; -+ dwc_otg_pcd_get_iso_packet_params(pcd, ep_handle, req_handle, -+ i, &status, &actual, &offset); -+ switch (status) { -+ case -DWC_E_NO_DATA: -+ status = -ENODATA; -+ break; -+ default: -+ if (status) { -+ DWC_PRINTF("unknown status in isoc packet\n"); -+ } -+ -+ } -+ iso_packet[i].status = status; -+ iso_packet[i].offset = offset; -+ iso_packet[i].actual_length = actual; -+ } -+ -+ iso_req->status = 0; -+ iso_req->process_buffer(ep_handle, iso_req); -+ -+ return 0; -+} -+#endif /* DWC_EN_ISOC */ -+ -+#ifdef DWC_UTE_PER_IO -+/** -+ * Copy the contents of the extended request to the Linux usb_request's -+ * extended part and call the gadget's completion. -+ * -+ * @param pcd Pointer to the pcd structure -+ * @param ep_handle Void pointer to the usb_ep structure -+ * @param req_handle Void pointer to the usb_request structure -+ * @param status Request status returned from the portable logic -+ * @param ereq_port Void pointer to the extended request structure -+ * created in the the portable part that contains the -+ * results of the processed iso packets. -+ */ -+static int _xisoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle, int32_t status, void *ereq_port) -+{ -+ struct dwc_ute_iso_req_ext *ereqorg = NULL; -+ struct dwc_iso_xreq_port *ereqport = NULL; -+ struct dwc_ute_iso_packet_descriptor *desc_org = NULL; -+ int i; -+ struct usb_request *req; -+ //struct dwc_ute_iso_packet_descriptor * -+ //int status = 0; -+ -+ req = (struct usb_request *)req_handle; -+ ereqorg = &req->ext_req; -+ ereqport = (struct dwc_iso_xreq_port *)ereq_port; -+ desc_org = ereqorg->per_io_frame_descs; -+ -+ if (req && req->complete) { -+ /* Copy the request data from the portable logic to our request */ -+ for (i = 0; i < ereqport->pio_pkt_count; i++) { -+ desc_org[i].actual_length = -+ ereqport->per_io_frame_descs[i].actual_length; -+ desc_org[i].status = -+ ereqport->per_io_frame_descs[i].status; -+ } -+ -+ switch (status) { -+ case -DWC_E_SHUTDOWN: -+ req->status = -ESHUTDOWN; -+ break; -+ case -DWC_E_RESTART: -+ req->status = -ECONNRESET; -+ break; -+ case -DWC_E_INVALID: -+ req->status = -EINVAL; -+ break; -+ case -DWC_E_TIMEOUT: -+ req->status = -ETIMEDOUT; -+ break; -+ default: -+ req->status = status; -+ } -+ -+ /* And call the gadget's completion */ -+ req->complete(ep_handle, req); -+ } -+ -+ return 0; -+} -+#endif /* DWC_UTE_PER_IO */ -+ -+static int _complete(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle, int32_t status, uint32_t actual) -+{ -+ struct usb_request *req = (struct usb_request *)req_handle; -+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27) -+ struct dwc_otg_pcd_ep *ep = NULL; -+#endif -+ -+ if (req && req->complete) { -+ switch (status) { -+ case -DWC_E_SHUTDOWN: -+ req->status = -ESHUTDOWN; -+ break; -+ case -DWC_E_RESTART: -+ req->status = -ECONNRESET; -+ break; -+ case -DWC_E_INVALID: -+ req->status = -EINVAL; -+ break; -+ case -DWC_E_TIMEOUT: -+ req->status = -ETIMEDOUT; -+ break; -+ default: -+ req->status = status; -+ -+ } -+ -+ req->actual = actual; -+ DWC_SPINUNLOCK(pcd->lock); -+ req->complete(ep_handle, req); -+ DWC_SPINLOCK(pcd->lock); -+ } -+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27) -+ ep = ep_from_handle(pcd, ep_handle); -+ if (GET_CORE_IF(pcd)->dma_enable) { -+ if (req->length != 0) { -+ dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev; -+ struct device *dev = NULL; -+ -+ if (otg_dev != NULL) -+ dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep); -+ -+ dma_unmap_single(dev, req->dma, req->length, -+ ep->dwc_ep.is_in ? -+ DMA_TO_DEVICE: DMA_FROM_DEVICE); -+ } -+ } -+#endif -+ -+ return 0; -+} -+ -+static int _connect(dwc_otg_pcd_t * pcd, int speed) -+{ -+ gadget_wrapper->gadget.speed = speed; -+ return 0; -+} -+ -+static int _disconnect(dwc_otg_pcd_t * pcd) -+{ -+ if (gadget_wrapper->driver && gadget_wrapper->driver->disconnect) { -+ gadget_wrapper->driver->disconnect(&gadget_wrapper->gadget); -+ } -+ return 0; -+} -+ -+static int _resume(dwc_otg_pcd_t * pcd) -+{ -+ if (gadget_wrapper->driver && gadget_wrapper->driver->resume) { -+ gadget_wrapper->driver->resume(&gadget_wrapper->gadget); -+ } -+ -+ return 0; -+} -+ -+static int _suspend(dwc_otg_pcd_t * pcd) -+{ -+ if (gadget_wrapper->driver && gadget_wrapper->driver->suspend) { -+ gadget_wrapper->driver->suspend(&gadget_wrapper->gadget); -+ } -+ return 0; -+} -+ -+/** -+ * This function updates the otg values in the gadget structure. -+ */ -+static int _hnp_changed(dwc_otg_pcd_t * pcd) -+{ -+ -+ if (!gadget_wrapper->gadget.is_otg) -+ return 0; -+ -+ gadget_wrapper->gadget.b_hnp_enable = get_b_hnp_enable(pcd); -+ gadget_wrapper->gadget.a_hnp_support = get_a_hnp_support(pcd); -+ gadget_wrapper->gadget.a_alt_hnp_support = get_a_alt_hnp_support(pcd); -+ return 0; -+} -+ -+static int _reset(dwc_otg_pcd_t * pcd) -+{ -+ return 0; -+} -+ -+#ifdef DWC_UTE_CFI -+static int _cfi_setup(dwc_otg_pcd_t * pcd, void *cfi_req) -+{ -+ int retval = -DWC_E_INVALID; -+ if (gadget_wrapper->driver->cfi_feature_setup) { -+ retval = -+ gadget_wrapper->driver-> -+ cfi_feature_setup(&gadget_wrapper->gadget, -+ (struct cfi_usb_ctrlrequest *)cfi_req); -+ } -+ -+ return retval; -+} -+#endif -+ -+static const struct dwc_otg_pcd_function_ops fops = { -+ .complete = _complete, -+#ifdef DWC_EN_ISOC -+ .isoc_complete = _isoc_complete, -+#endif -+ .setup = _setup, -+ .disconnect = _disconnect, -+ .connect = _connect, -+ .resume = _resume, -+ .suspend = _suspend, -+ .hnp_changed = _hnp_changed, -+ .reset = _reset, -+#ifdef DWC_UTE_CFI -+ .cfi_setup = _cfi_setup, -+#endif -+#ifdef DWC_UTE_PER_IO -+ .xisoc_complete = _xisoc_complete, -+#endif -+}; -+ -+/** -+ * This function is the top level PCD interrupt handler. -+ */ -+static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev) -+{ -+ dwc_otg_pcd_t *pcd = dev; -+ int32_t retval = IRQ_NONE; -+ -+ retval = dwc_otg_pcd_handle_intr(pcd); -+ if (retval != 0) { -+ S3C2410X_CLEAR_EINTPEND(); -+ } -+ return IRQ_RETVAL(retval); -+} -+ -+/** -+ * This function initialized the usb_ep structures to there default -+ * state. -+ * -+ * @param d Pointer on gadget_wrapper. -+ */ -+void gadget_add_eps(struct gadget_wrapper *d) -+{ -+ static const char *names[] = { -+ -+ "ep0", -+ "ep1in", -+ "ep2in", -+ "ep3in", -+ "ep4in", -+ "ep5in", -+ "ep6in", -+ "ep7in", -+ "ep8in", -+ "ep9in", -+ "ep10in", -+ "ep11in", -+ "ep12in", -+ "ep13in", -+ "ep14in", -+ "ep15in", -+ "ep1out", -+ "ep2out", -+ "ep3out", -+ "ep4out", -+ "ep5out", -+ "ep6out", -+ "ep7out", -+ "ep8out", -+ "ep9out", -+ "ep10out", -+ "ep11out", -+ "ep12out", -+ "ep13out", -+ "ep14out", -+ "ep15out" -+ }; -+ -+ int i; -+ struct usb_ep *ep; -+ int8_t dev_endpoints; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s\n", __func__); -+ -+ INIT_LIST_HEAD(&d->gadget.ep_list); -+ d->gadget.ep0 = &d->ep0; -+ d->gadget.speed = USB_SPEED_UNKNOWN; -+ -+ INIT_LIST_HEAD(&d->gadget.ep0->ep_list); -+ -+ /** -+ * Initialize the EP0 structure. -+ */ -+ ep = &d->ep0; -+ -+ /* Init the usb_ep structure. */ -+ ep->name = names[0]; -+ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; -+ -+ /** -+ * @todo NGS: What should the max packet size be set to -+ * here? Before EP type is set? -+ */ -+ ep->maxpacket = MAX_PACKET_SIZE; -+ dwc_otg_pcd_ep_enable(d->pcd, NULL, ep); -+ -+ list_add_tail(&ep->ep_list, &d->gadget.ep_list); -+ -+ /** -+ * Initialize the EP structures. -+ */ -+ dev_endpoints = d->pcd->core_if->dev_if->num_in_eps; -+ -+ for (i = 0; i < dev_endpoints; i++) { -+ ep = &d->in_ep[i]; -+ -+ /* Init the usb_ep structure. */ -+ ep->name = names[d->pcd->in_ep[i].dwc_ep.num]; -+ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; -+ -+ /** -+ * @todo NGS: What should the max packet size be set to -+ * here? Before EP type is set? -+ */ -+ ep->maxpacket = MAX_PACKET_SIZE; -+ list_add_tail(&ep->ep_list, &d->gadget.ep_list); -+ } -+ -+ dev_endpoints = d->pcd->core_if->dev_if->num_out_eps; -+ -+ for (i = 0; i < dev_endpoints; i++) { -+ ep = &d->out_ep[i]; -+ -+ /* Init the usb_ep structure. */ -+ ep->name = names[15 + d->pcd->out_ep[i].dwc_ep.num]; -+ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; -+ -+ /** -+ * @todo NGS: What should the max packet size be set to -+ * here? Before EP type is set? -+ */ -+ ep->maxpacket = MAX_PACKET_SIZE; -+ -+ list_add_tail(&ep->ep_list, &d->gadget.ep_list); -+ } -+ -+ /* remove ep0 from the list. There is a ep0 pointer. */ -+ list_del_init(&d->ep0.ep_list); -+ -+ d->ep0.maxpacket = MAX_EP0_SIZE; -+} -+ -+/** -+ * This function releases the Gadget device. -+ * required by device_unregister(). -+ * -+ * @todo Should this do something? Should it free the PCD? -+ */ -+static void dwc_otg_pcd_gadget_release(struct device *dev) -+{ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, dev); -+} -+ -+static struct gadget_wrapper *alloc_wrapper(dwc_bus_dev_t *_dev) -+{ -+ static char pcd_name[] = "dwc_otg_pcd"; -+ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); -+ struct gadget_wrapper *d; -+ int retval; -+ -+ d = DWC_ALLOC(sizeof(*d)); -+ if (d == NULL) { -+ return NULL; -+ } -+ -+ memset(d, 0, sizeof(*d)); -+ -+ d->gadget.name = pcd_name; -+ d->pcd = otg_dev->pcd; -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) -+ strcpy(d->gadget.dev.bus_id, "gadget"); -+#else -+ dev_set_name(&d->gadget.dev, "%s", "gadget"); -+#endif -+ -+ d->gadget.dev.parent = &_dev->dev; -+ d->gadget.dev.release = dwc_otg_pcd_gadget_release; -+ d->gadget.ops = &dwc_otg_pcd_ops; -+ d->gadget.max_speed = dwc_otg_pcd_is_dualspeed(otg_dev->pcd) ? USB_SPEED_HIGH:USB_SPEED_FULL; -+ d->gadget.is_otg = dwc_otg_pcd_is_otg(otg_dev->pcd); -+ -+ d->driver = 0; -+ /* Register the gadget device */ -+ retval = device_register(&d->gadget.dev); -+ if (retval != 0) { -+ DWC_ERROR("device_register failed\n"); -+ DWC_FREE(d); -+ return NULL; -+ } -+ -+ return d; -+} -+ -+static void free_wrapper(struct gadget_wrapper *d) -+{ -+ if (d->driver) { -+ /* should have been done already by driver model core */ -+ DWC_WARN("driver '%s' is still registered\n", -+ d->driver->driver.name); -+#ifdef CONFIG_USB_GADGET -+ usb_gadget_unregister_driver(d->driver); -+#endif -+ } -+ -+ device_unregister(&d->gadget.dev); -+ DWC_FREE(d); -+} -+ -+/** -+ * This function initialized the PCD portion of the driver. -+ * -+ */ -+int pcd_init(dwc_bus_dev_t *_dev) -+{ -+ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); -+ int retval = 0; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev=%p\n", __func__, _dev, otg_dev); -+ -+ otg_dev->pcd = dwc_otg_pcd_init(otg_dev); -+ -+ if (!otg_dev->pcd) { -+ DWC_ERROR("dwc_otg_pcd_init failed\n"); -+ return -ENOMEM; -+ } -+ -+ otg_dev->pcd->otg_dev = otg_dev; -+ gadget_wrapper = alloc_wrapper(_dev); -+ -+ /* -+ * Initialize EP structures -+ */ -+ gadget_add_eps(gadget_wrapper); -+ /* -+ * Setup interupt handler -+ */ -+#ifdef PLATFORM_INTERFACE -+ DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", -+ platform_get_irq(_dev, fiq_enable ? 0 : 1)); -+ retval = request_irq(platform_get_irq(_dev, fiq_enable ? 0 : 1), dwc_otg_pcd_irq, -+ IRQF_SHARED, gadget_wrapper->gadget.name, -+ otg_dev->pcd); -+ if (retval != 0) { -+ DWC_ERROR("request of irq%d failed\n", -+ platform_get_irq(_dev, fiq_enable ? 0 : 1)); -+ free_wrapper(gadget_wrapper); -+ return -EBUSY; -+ } -+#else -+ DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", -+ _dev->irq); -+ retval = request_irq(_dev->irq, dwc_otg_pcd_irq, -+ IRQF_SHARED | IRQF_DISABLED, -+ gadget_wrapper->gadget.name, otg_dev->pcd); -+ if (retval != 0) { -+ DWC_ERROR("request of irq%d failed\n", _dev->irq); -+ free_wrapper(gadget_wrapper); -+ return -EBUSY; -+ } -+#endif -+ -+ dwc_otg_pcd_start(gadget_wrapper->pcd, &fops); -+ -+ return retval; -+} -+ -+/** -+ * Cleanup the PCD. -+ */ -+void pcd_remove(dwc_bus_dev_t *_dev) -+{ -+ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); -+ dwc_otg_pcd_t *pcd = otg_dev->pcd; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev); -+ -+ /* -+ * Free the IRQ -+ */ -+#ifdef PLATFORM_INTERFACE -+ free_irq(platform_get_irq(_dev, 0), pcd); -+#else -+ free_irq(_dev->irq, pcd); -+#endif -+ dwc_otg_pcd_remove(otg_dev->pcd); -+ free_wrapper(gadget_wrapper); -+ otg_dev->pcd = 0; -+} -+ -+#endif /* DWC_HOST_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_regs.h -@@ -0,0 +1,2550 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $ -+ * $Revision: #98 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#ifndef __DWC_OTG_REGS_H__ -+#define __DWC_OTG_REGS_H__ -+ -+#include "dwc_otg_core_if.h" -+ -+/** -+ * @file -+ * -+ * This file contains the data structures for accessing the DWC_otg core registers. -+ * -+ * The application interfaces with the HS OTG core by reading from and -+ * writing to the Control and Status Register (CSR) space through the -+ * AHB Slave interface. These registers are 32 bits wide, and the -+ * addresses are 32-bit-block aligned. -+ * CSRs are classified as follows: -+ * - Core Global Registers -+ * - Device Mode Registers -+ * - Device Global Registers -+ * - Device Endpoint Specific Registers -+ * - Host Mode Registers -+ * - Host Global Registers -+ * - Host Port CSRs -+ * - Host Channel Specific Registers -+ * -+ * Only the Core Global registers can be accessed in both Device and -+ * Host modes. When the HS OTG core is operating in one mode, either -+ * Device or Host, the application must not access registers from the -+ * other mode. When the core switches from one mode to another, the -+ * registers in the new mode of operation must be reprogrammed as they -+ * would be after a power-on reset. -+ */ -+ -+/****************************************************************************/ -+/** DWC_otg Core registers . -+ * The dwc_otg_core_global_regs structure defines the size -+ * and relative field offsets for the Core Global registers. -+ */ -+typedef struct dwc_otg_core_global_regs { -+ /** OTG Control and Status Register. Offset: 000h */ -+ volatile uint32_t gotgctl; -+ /** OTG Interrupt Register. Offset: 004h */ -+ volatile uint32_t gotgint; -+ /**Core AHB Configuration Register. Offset: 008h */ -+ volatile uint32_t gahbcfg; -+ -+#define DWC_GLBINTRMASK 0x0001 -+#define DWC_DMAENABLE 0x0020 -+#define DWC_NPTXEMPTYLVL_EMPTY 0x0080 -+#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000 -+#define DWC_PTXEMPTYLVL_EMPTY 0x0100 -+#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000 -+ -+ /**Core USB Configuration Register. Offset: 00Ch */ -+ volatile uint32_t gusbcfg; -+ /**Core Reset Register. Offset: 010h */ -+ volatile uint32_t grstctl; -+ /**Core Interrupt Register. Offset: 014h */ -+ volatile uint32_t gintsts; -+ /**Core Interrupt Mask Register. Offset: 018h */ -+ volatile uint32_t gintmsk; -+ /**Receive Status Queue Read Register (Read Only). Offset: 01Ch */ -+ volatile uint32_t grxstsr; -+ /**Receive Status Queue Read & POP Register (Read Only). Offset: 020h*/ -+ volatile uint32_t grxstsp; -+ /**Receive FIFO Size Register. Offset: 024h */ -+ volatile uint32_t grxfsiz; -+ /**Non Periodic Transmit FIFO Size Register. Offset: 028h */ -+ volatile uint32_t gnptxfsiz; -+ /**Non Periodic Transmit FIFO/Queue Status Register (Read -+ * Only). Offset: 02Ch */ -+ volatile uint32_t gnptxsts; -+ /**I2C Access Register. Offset: 030h */ -+ volatile uint32_t gi2cctl; -+ /**PHY Vendor Control Register. Offset: 034h */ -+ volatile uint32_t gpvndctl; -+ /**General Purpose Input/Output Register. Offset: 038h */ -+ volatile uint32_t ggpio; -+ /**User ID Register. Offset: 03Ch */ -+ volatile uint32_t guid; -+ /**Synopsys ID Register (Read Only). Offset: 040h */ -+ volatile uint32_t gsnpsid; -+ /**User HW Config1 Register (Read Only). Offset: 044h */ -+ volatile uint32_t ghwcfg1; -+ /**User HW Config2 Register (Read Only). Offset: 048h */ -+ volatile uint32_t ghwcfg2; -+#define DWC_SLAVE_ONLY_ARCH 0 -+#define DWC_EXT_DMA_ARCH 1 -+#define DWC_INT_DMA_ARCH 2 -+ -+#define DWC_MODE_HNP_SRP_CAPABLE 0 -+#define DWC_MODE_SRP_ONLY_CAPABLE 1 -+#define DWC_MODE_NO_HNP_SRP_CAPABLE 2 -+#define DWC_MODE_SRP_CAPABLE_DEVICE 3 -+#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4 -+#define DWC_MODE_SRP_CAPABLE_HOST 5 -+#define DWC_MODE_NO_SRP_CAPABLE_HOST 6 -+ -+ /**User HW Config3 Register (Read Only). Offset: 04Ch */ -+ volatile uint32_t ghwcfg3; -+ /**User HW Config4 Register (Read Only). Offset: 050h*/ -+ volatile uint32_t ghwcfg4; -+ /** Core LPM Configuration register Offset: 054h*/ -+ volatile uint32_t glpmcfg; -+ /** Global PowerDn Register Offset: 058h */ -+ volatile uint32_t gpwrdn; -+ /** Global DFIFO SW Config Register Offset: 05Ch */ -+ volatile uint32_t gdfifocfg; -+ /** ADP Control Register Offset: 060h */ -+ volatile uint32_t adpctl; -+ /** Reserved Offset: 064h-0FFh */ -+ volatile uint32_t reserved39[39]; -+ /** Host Periodic Transmit FIFO Size Register. Offset: 100h */ -+ volatile uint32_t hptxfsiz; -+ /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled, -+ otherwise Device Transmit FIFO#n Register. -+ * Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15). */ -+ volatile uint32_t dtxfsiz[15]; -+} dwc_otg_core_global_regs_t; -+ -+/** -+ * This union represents the bit fields of the Core OTG Control -+ * and Status Register (GOTGCTL). Set the bits using the bit -+ * fields then write the d32 value to the register. -+ */ -+typedef union gotgctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned sesreqscs:1; -+ unsigned sesreq:1; -+ unsigned vbvalidoven:1; -+ unsigned vbvalidovval:1; -+ unsigned avalidoven:1; -+ unsigned avalidovval:1; -+ unsigned bvalidoven:1; -+ unsigned bvalidovval:1; -+ unsigned hstnegscs:1; -+ unsigned hnpreq:1; -+ unsigned hstsethnpen:1; -+ unsigned devhnpen:1; -+ unsigned reserved12_15:4; -+ unsigned conidsts:1; -+ unsigned dbnctime:1; -+ unsigned asesvld:1; -+ unsigned bsesvld:1; -+ unsigned otgver:1; -+ unsigned reserved1:1; -+ unsigned multvalidbc:5; -+ unsigned chirpen:1; -+ unsigned reserved28_31:4; -+ } b; -+} gotgctl_data_t; -+ -+/** -+ * This union represents the bit fields of the Core OTG Interrupt Register -+ * (GOTGINT). Set/clear the bits using the bit fields then write the d32 -+ * value to the register. -+ */ -+typedef union gotgint_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Current Mode */ -+ unsigned reserved0_1:2; -+ -+ /** Session End Detected */ -+ unsigned sesenddet:1; -+ -+ unsigned reserved3_7:5; -+ -+ /** Session Request Success Status Change */ -+ unsigned sesreqsucstschng:1; -+ /** Host Negotiation Success Status Change */ -+ unsigned hstnegsucstschng:1; -+ -+ unsigned reserved10_16:7; -+ -+ /** Host Negotiation Detected */ -+ unsigned hstnegdet:1; -+ /** A-Device Timeout Change */ -+ unsigned adevtoutchng:1; -+ /** Debounce Done */ -+ unsigned debdone:1; -+ /** Multi-Valued input changed */ -+ unsigned mvic:1; -+ -+ unsigned reserved31_21:11; -+ -+ } b; -+} gotgint_data_t; -+ -+/** -+ * This union represents the bit fields of the Core AHB Configuration -+ * Register (GAHBCFG). Set/clear the bits using the bit fields then -+ * write the d32 value to the register. -+ */ -+typedef union gahbcfg_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned glblintrmsk:1; -+#define DWC_GAHBCFG_GLBINT_ENABLE 1 -+ -+ unsigned hburstlen:4; -+#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0 -+#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1 -+#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3 -+#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5 -+#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7 -+ -+ unsigned dmaenable:1; -+#define DWC_GAHBCFG_DMAENABLE 1 -+ unsigned reserved:1; -+ unsigned nptxfemplvl_txfemplvl:1; -+ unsigned ptxfemplvl:1; -+#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1 -+#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0 -+ unsigned reserved9_20:12; -+ unsigned remmemsupp:1; -+ unsigned notialldmawrit:1; -+ unsigned ahbsingle:1; -+ unsigned reserved24_31:8; -+ } b; -+} gahbcfg_data_t; -+ -+/** -+ * This union represents the bit fields of the Core USB Configuration -+ * Register (GUSBCFG). Set the bits using the bit fields then write -+ * the d32 value to the register. -+ */ -+typedef union gusbcfg_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned toutcal:3; -+ unsigned phyif:1; -+ unsigned ulpi_utmi_sel:1; -+ unsigned fsintf:1; -+ unsigned physel:1; -+ unsigned ddrsel:1; -+ unsigned srpcap:1; -+ unsigned hnpcap:1; -+ unsigned usbtrdtim:4; -+ unsigned reserved1:1; -+ unsigned phylpwrclksel:1; -+ unsigned otgutmifssel:1; -+ unsigned ulpi_fsls:1; -+ unsigned ulpi_auto_res:1; -+ unsigned ulpi_clk_sus_m:1; -+ unsigned ulpi_ext_vbus_drv:1; -+ unsigned ulpi_int_vbus_indicator:1; -+ unsigned term_sel_dl_pulse:1; -+ unsigned indicator_complement:1; -+ unsigned indicator_pass_through:1; -+ unsigned ulpi_int_prot_dis:1; -+ unsigned ic_usb_cap:1; -+ unsigned ic_traffic_pull_remove:1; -+ unsigned tx_end_delay:1; -+ unsigned force_host_mode:1; -+ unsigned force_dev_mode:1; -+ unsigned reserved31:1; -+ } b; -+} gusbcfg_data_t; -+ -+/** -+ * This union represents the bit fields of the Core Reset Register -+ * (GRSTCTL). Set/clear the bits using the bit fields then write the -+ * d32 value to the register. -+ */ -+typedef union grstctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Core Soft Reset (CSftRst) (Device and Host) -+ * -+ * The application can flush the control logic in the -+ * entire core using this bit. This bit resets the -+ * pipelines in the AHB Clock domain as well as the -+ * PHY Clock domain. -+ * -+ * The state machines are reset to an IDLE state, the -+ * control bits in the CSRs are cleared, all the -+ * transmit FIFOs and the receive FIFO are flushed. -+ * -+ * The status mask bits that control the generation of -+ * the interrupt, are cleared, to clear the -+ * interrupt. The interrupt status bits are not -+ * cleared, so the application can get the status of -+ * any events that occurred in the core after it has -+ * set this bit. -+ * -+ * Any transactions on the AHB are terminated as soon -+ * as possible following the protocol. Any -+ * transactions on the USB are terminated immediately. -+ * -+ * The configuration settings in the CSRs are -+ * unchanged, so the software doesn't have to -+ * reprogram these registers (Device -+ * Configuration/Host Configuration/Core System -+ * Configuration/Core PHY Configuration). -+ * -+ * The application can write to this bit, any time it -+ * wants to reset the core. This is a self clearing -+ * bit and the core clears this bit after all the -+ * necessary logic is reset in the core, which may -+ * take several clocks, depending on the current state -+ * of the core. -+ */ -+ unsigned csftrst:1; -+ /** Hclk Soft Reset -+ * -+ * The application uses this bit to reset the control logic in -+ * the AHB clock domain. Only AHB clock domain pipelines are -+ * reset. -+ */ -+ unsigned hsftrst:1; -+ /** Host Frame Counter Reset (Host Only)
-+ * -+ * The application can reset the (micro)frame number -+ * counter inside the core, using this bit. When the -+ * (micro)frame counter is reset, the subsequent SOF -+ * sent out by the core, will have a (micro)frame -+ * number of 0. -+ */ -+ unsigned hstfrm:1; -+ /** In Token Sequence Learning Queue Flush -+ * (INTknQFlsh) (Device Only) -+ */ -+ unsigned intknqflsh:1; -+ /** RxFIFO Flush (RxFFlsh) (Device and Host) -+ * -+ * The application can flush the entire Receive FIFO -+ * using this bit. The application must first -+ * ensure that the core is not in the middle of a -+ * transaction. The application should write into -+ * this bit, only after making sure that neither the -+ * DMA engine is reading from the RxFIFO nor the MAC -+ * is writing the data in to the FIFO. The -+ * application should wait until the bit is cleared -+ * before performing any other operations. This bit -+ * will takes 8 clocks (slowest of PHY or AHB clock) -+ * to clear. -+ */ -+ unsigned rxfflsh:1; -+ /** TxFIFO Flush (TxFFlsh) (Device and Host). -+ * -+ * This bit is used to selectively flush a single or -+ * all transmit FIFOs. The application must first -+ * ensure that the core is not in the middle of a -+ * transaction. The application should write into -+ * this bit, only after making sure that neither the -+ * DMA engine is writing into the TxFIFO nor the MAC -+ * is reading the data out of the FIFO. The -+ * application should wait until the core clears this -+ * bit, before performing any operations. This bit -+ * will takes 8 clocks (slowest of PHY or AHB clock) -+ * to clear. -+ */ -+ unsigned txfflsh:1; -+ -+ /** TxFIFO Number (TxFNum) (Device and Host). -+ * -+ * This is the FIFO number which needs to be flushed, -+ * using the TxFIFO Flush bit. This field should not -+ * be changed until the TxFIFO Flush bit is cleared by -+ * the core. -+ * - 0x0 : Non Periodic TxFIFO Flush -+ * - 0x1 : Periodic TxFIFO #1 Flush in device mode -+ * or Periodic TxFIFO in host mode -+ * - 0x2 : Periodic TxFIFO #2 Flush in device mode. -+ * - ... -+ * - 0xF : Periodic TxFIFO #15 Flush in device mode -+ * - 0x10: Flush all the Transmit NonPeriodic and -+ * Transmit Periodic FIFOs in the core -+ */ -+ unsigned txfnum:5; -+ /** Reserved */ -+ unsigned reserved11_29:19; -+ /** DMA Request Signal. Indicated DMA request is in -+ * probress. Used for debug purpose. */ -+ unsigned dmareq:1; -+ /** AHB Master Idle. Indicates the AHB Master State -+ * Machine is in IDLE condition. */ -+ unsigned ahbidle:1; -+ } b; -+} grstctl_t; -+ -+/** -+ * This union represents the bit fields of the Core Interrupt Mask -+ * Register (GINTMSK). Set/clear the bits using the bit fields then -+ * write the d32 value to the register. -+ */ -+typedef union gintmsk_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned reserved0:1; -+ unsigned modemismatch:1; -+ unsigned otgintr:1; -+ unsigned sofintr:1; -+ unsigned rxstsqlvl:1; -+ unsigned nptxfempty:1; -+ unsigned ginnakeff:1; -+ unsigned goutnakeff:1; -+ unsigned ulpickint:1; -+ unsigned i2cintr:1; -+ unsigned erlysuspend:1; -+ unsigned usbsuspend:1; -+ unsigned usbreset:1; -+ unsigned enumdone:1; -+ unsigned isooutdrop:1; -+ unsigned eopframe:1; -+ unsigned restoredone:1; -+ unsigned epmismatch:1; -+ unsigned inepintr:1; -+ unsigned outepintr:1; -+ unsigned incomplisoin:1; -+ unsigned incomplisoout:1; -+ unsigned fetsusp:1; -+ unsigned resetdet:1; -+ unsigned portintr:1; -+ unsigned hcintr:1; -+ unsigned ptxfempty:1; -+ unsigned lpmtranrcvd:1; -+ unsigned conidstschng:1; -+ unsigned disconnect:1; -+ unsigned sessreqintr:1; -+ unsigned wkupintr:1; -+ } b; -+} gintmsk_data_t; -+/** -+ * This union represents the bit fields of the Core Interrupt Register -+ * (GINTSTS). Set/clear the bits using the bit fields then write the -+ * d32 value to the register. -+ */ -+typedef union gintsts_data { -+ /** raw register data */ -+ uint32_t d32; -+#define DWC_SOF_INTR_MASK 0x0008 -+ /** register bits */ -+ struct { -+#define DWC_HOST_MODE 1 -+ unsigned curmode:1; -+ unsigned modemismatch:1; -+ unsigned otgintr:1; -+ unsigned sofintr:1; -+ unsigned rxstsqlvl:1; -+ unsigned nptxfempty:1; -+ unsigned ginnakeff:1; -+ unsigned goutnakeff:1; -+ unsigned ulpickint:1; -+ unsigned i2cintr:1; -+ unsigned erlysuspend:1; -+ unsigned usbsuspend:1; -+ unsigned usbreset:1; -+ unsigned enumdone:1; -+ unsigned isooutdrop:1; -+ unsigned eopframe:1; -+ unsigned restoredone:1; -+ unsigned epmismatch:1; -+ unsigned inepint:1; -+ unsigned outepintr:1; -+ unsigned incomplisoin:1; -+ unsigned incomplisoout:1; -+ unsigned fetsusp:1; -+ unsigned resetdet:1; -+ unsigned portintr:1; -+ unsigned hcintr:1; -+ unsigned ptxfempty:1; -+ unsigned lpmtranrcvd:1; -+ unsigned conidstschng:1; -+ unsigned disconnect:1; -+ unsigned sessreqintr:1; -+ unsigned wkupintr:1; -+ } b; -+} gintsts_data_t; -+ -+/** -+ * This union represents the bit fields in the Device Receive Status Read and -+ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the d32 -+ * element then read out the bits using the bit elements. -+ */ -+typedef union device_grxsts_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned epnum:4; -+ unsigned bcnt:11; -+ unsigned dpid:2; -+ -+#define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet -+#define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete -+ -+#define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK -+#define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete -+#define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet -+ unsigned pktsts:4; -+ unsigned fn:4; -+ unsigned reserved25_31:7; -+ } b; -+} device_grxsts_data_t; -+ -+/** -+ * This union represents the bit fields in the Host Receive Status Read and -+ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the d32 -+ * element then read out the bits using the bit elements. -+ */ -+typedef union host_grxsts_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned chnum:4; -+ unsigned bcnt:11; -+ unsigned dpid:2; -+ -+ unsigned pktsts:4; -+#define DWC_GRXSTS_PKTSTS_IN 0x2 -+#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3 -+#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5 -+#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7 -+ -+ unsigned reserved21_31:11; -+ } b; -+} host_grxsts_data_t; -+ -+/** -+ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ, -+ * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the d32 element -+ * then read out the bits using the bit elements. -+ */ -+typedef union fifosize_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned startaddr:16; -+ unsigned depth:16; -+ } b; -+} fifosize_data_t; -+ -+/** -+ * This union represents the bit fields in the Non-Periodic Transmit -+ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the -+ * d32 element then read out the bits using the bit -+ * elements. -+ */ -+typedef union gnptxsts_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned nptxfspcavail:16; -+ unsigned nptxqspcavail:8; -+ /** Top of the Non-Periodic Transmit Request Queue -+ * - bit 24 - Terminate (Last entry for the selected -+ * channel/EP) -+ * - bits 26:25 - Token Type -+ * - 2'b00 - IN/OUT -+ * - 2'b01 - Zero Length OUT -+ * - 2'b10 - PING/Complete Split -+ * - 2'b11 - Channel Halt -+ * - bits 30:27 - Channel/EP Number -+ */ -+ unsigned nptxqtop_terminate:1; -+ unsigned nptxqtop_token:2; -+ unsigned nptxqtop_chnep:4; -+ unsigned reserved:1; -+ } b; -+} gnptxsts_data_t; -+ -+/** -+ * This union represents the bit fields in the Transmit -+ * FIFO Status Register (DTXFSTS). Read the register into the -+ * d32 element then read out the bits using the bit -+ * elements. -+ */ -+typedef union dtxfsts_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned txfspcavail:16; -+ unsigned reserved:16; -+ } b; -+} dtxfsts_data_t; -+ -+/** -+ * This union represents the bit fields in the I2C Control Register -+ * (I2CCTL). Read the register into the d32 element then read out the -+ * bits using the bit elements. -+ */ -+typedef union gi2cctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned rwdata:8; -+ unsigned regaddr:8; -+ unsigned addr:7; -+ unsigned i2cen:1; -+ unsigned ack:1; -+ unsigned i2csuspctl:1; -+ unsigned i2cdevaddr:2; -+ unsigned i2cdatse0:1; -+ unsigned reserved:1; -+ unsigned rw:1; -+ unsigned bsydne:1; -+ } b; -+} gi2cctl_data_t; -+ -+/** -+ * This union represents the bit fields in the PHY Vendor Control Register -+ * (GPVNDCTL). Read the register into the d32 element then read out the -+ * bits using the bit elements. -+ */ -+typedef union gpvndctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned regdata:8; -+ unsigned vctrl:8; -+ unsigned regaddr16_21:6; -+ unsigned regwr:1; -+ unsigned reserved23_24:2; -+ unsigned newregreq:1; -+ unsigned vstsbsy:1; -+ unsigned vstsdone:1; -+ unsigned reserved28_30:3; -+ unsigned disulpidrvr:1; -+ } b; -+} gpvndctl_data_t; -+ -+/** -+ * This union represents the bit fields in the General Purpose -+ * Input/Output Register (GGPIO). -+ * Read the register into the d32 element then read out the -+ * bits using the bit elements. -+ */ -+typedef union ggpio_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned gpi:16; -+ unsigned gpo:16; -+ } b; -+} ggpio_data_t; -+ -+/** -+ * This union represents the bit fields in the User ID Register -+ * (GUID). Read the register into the d32 element then read out the -+ * bits using the bit elements. -+ */ -+typedef union guid_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned rwdata:32; -+ } b; -+} guid_data_t; -+ -+/** -+ * This union represents the bit fields in the Synopsys ID Register -+ * (GSNPSID). Read the register into the d32 element then read out the -+ * bits using the bit elements. -+ */ -+typedef union gsnpsid_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned rwdata:32; -+ } b; -+} gsnpsid_data_t; -+ -+/** -+ * This union represents the bit fields in the User HW Config1 -+ * Register. Read the register into the d32 element then read -+ * out the bits using the bit elements. -+ */ -+typedef union hwcfg1_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned ep_dir0:2; -+ unsigned ep_dir1:2; -+ unsigned ep_dir2:2; -+ unsigned ep_dir3:2; -+ unsigned ep_dir4:2; -+ unsigned ep_dir5:2; -+ unsigned ep_dir6:2; -+ unsigned ep_dir7:2; -+ unsigned ep_dir8:2; -+ unsigned ep_dir9:2; -+ unsigned ep_dir10:2; -+ unsigned ep_dir11:2; -+ unsigned ep_dir12:2; -+ unsigned ep_dir13:2; -+ unsigned ep_dir14:2; -+ unsigned ep_dir15:2; -+ } b; -+} hwcfg1_data_t; -+ -+/** -+ * This union represents the bit fields in the User HW Config2 -+ * Register. Read the register into the d32 element then read -+ * out the bits using the bit elements. -+ */ -+typedef union hwcfg2_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /* GHWCFG2 */ -+ unsigned op_mode:3; -+#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0 -+#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1 -+#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2 -+#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3 -+#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4 -+#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5 -+#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6 -+ -+ unsigned architecture:2; -+ unsigned point2point:1; -+ unsigned hs_phy_type:2; -+#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0 -+#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1 -+#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2 -+#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3 -+ -+ unsigned fs_phy_type:2; -+ unsigned num_dev_ep:4; -+ unsigned num_host_chan:4; -+ unsigned perio_ep_supported:1; -+ unsigned dynamic_fifo:1; -+ unsigned multi_proc_int:1; -+ unsigned reserved21:1; -+ unsigned nonperio_tx_q_depth:2; -+ unsigned host_perio_tx_q_depth:2; -+ unsigned dev_token_q_depth:5; -+ unsigned otg_enable_ic_usb:1; -+ } b; -+} hwcfg2_data_t; -+ -+/** -+ * This union represents the bit fields in the User HW Config3 -+ * Register. Read the register into the d32 element then read -+ * out the bits using the bit elements. -+ */ -+typedef union hwcfg3_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /* GHWCFG3 */ -+ unsigned xfer_size_cntr_width:4; -+ unsigned packet_size_cntr_width:3; -+ unsigned otg_func:1; -+ unsigned i2c:1; -+ unsigned vendor_ctrl_if:1; -+ unsigned optional_features:1; -+ unsigned synch_reset_type:1; -+ unsigned adp_supp:1; -+ unsigned otg_enable_hsic:1; -+ unsigned bc_support:1; -+ unsigned otg_lpm_en:1; -+ unsigned dfifo_depth:16; -+ } b; -+} hwcfg3_data_t; -+ -+/** -+ * This union represents the bit fields in the User HW Config4 -+ * Register. Read the register into the d32 element then read -+ * out the bits using the bit elements. -+ */ -+typedef union hwcfg4_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned num_dev_perio_in_ep:4; -+ unsigned power_optimiz:1; -+ unsigned min_ahb_freq:1; -+ unsigned hiber:1; -+ unsigned xhiber:1; -+ unsigned reserved:6; -+ unsigned utmi_phy_data_width:2; -+ unsigned num_dev_mode_ctrl_ep:4; -+ unsigned iddig_filt_en:1; -+ unsigned vbus_valid_filt_en:1; -+ unsigned a_valid_filt_en:1; -+ unsigned b_valid_filt_en:1; -+ unsigned session_end_filt_en:1; -+ unsigned ded_fifo_en:1; -+ unsigned num_in_eps:4; -+ unsigned desc_dma:1; -+ unsigned desc_dma_dyn:1; -+ } b; -+} hwcfg4_data_t; -+ -+/** -+ * This union represents the bit fields of the Core LPM Configuration -+ * Register (GLPMCFG). Set the bits using bit fields then write -+ * the d32 value to the register. -+ */ -+typedef union glpmctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** LPM-Capable (LPMCap) (Device and Host) -+ * The application uses this bit to control -+ * the DWC_otg core LPM capabilities. -+ */ -+ unsigned lpm_cap_en:1; -+ /** LPM response programmed by application (AppL1Res) (Device) -+ * Handshake response to LPM token pre-programmed -+ * by device application software. -+ */ -+ unsigned appl_resp:1; -+ /** Host Initiated Resume Duration (HIRD) (Device and Host) -+ * In Host mode this field indicates the value of HIRD -+ * to be sent in an LPM transaction. -+ * In Device mode this field is updated with the -+ * Received LPM Token HIRD bmAttribute -+ * when an ACK/NYET/STALL response is sent -+ * to an LPM transaction. -+ */ -+ unsigned hird:4; -+ /** RemoteWakeEnable (bRemoteWake) (Device and Host) -+ * In Host mode this bit indicates the value of remote -+ * wake up to be sent in wIndex field of LPM transaction. -+ * In Device mode this field is updated with the -+ * Received LPM Token bRemoteWake bmAttribute -+ * when an ACK/NYET/STALL response is sent -+ * to an LPM transaction. -+ */ -+ unsigned rem_wkup_en:1; -+ /** Enable utmi_sleep_n (EnblSlpM) (Device and Host) -+ * The application uses this bit to control -+ * the utmi_sleep_n assertion to the PHY when in L1 state. -+ */ -+ unsigned en_utmi_sleep:1; -+ /** HIRD Threshold (HIRD_Thres) (Device and Host) -+ */ -+ unsigned hird_thres:5; -+ /** LPM Response (CoreL1Res) (Device and Host) -+ * In Host mode this bit contains handsake response to -+ * LPM transaction. -+ * In Device mode the response of the core to -+ * LPM transaction received is reflected in these two bits. -+ - 0x0 : ERROR (No handshake response) -+ - 0x1 : STALL -+ - 0x2 : NYET -+ - 0x3 : ACK -+ */ -+ unsigned lpm_resp:2; -+ /** Port Sleep Status (SlpSts) (Device and Host) -+ * This bit is set as long as a Sleep condition -+ * is present on the USB bus. -+ */ -+ unsigned prt_sleep_sts:1; -+ /** Sleep State Resume OK (L1ResumeOK) (Device and Host) -+ * Indicates that the application or host -+ * can start resume from Sleep state. -+ */ -+ unsigned sleep_state_resumeok:1; -+ /** LPM channel Index (LPM_Chnl_Indx) (Host) -+ * The channel number on which the LPM transaction -+ * has to be applied while sending -+ * an LPM transaction to the local device. -+ */ -+ unsigned lpm_chan_index:4; -+ /** LPM Retry Count (LPM_Retry_Cnt) (Host) -+ * Number host retries that would be performed -+ * if the device response was not valid response. -+ */ -+ unsigned retry_count:3; -+ /** Send LPM Transaction (SndLPM) (Host) -+ * When set by application software, -+ * an LPM transaction containing two tokens -+ * is sent. -+ */ -+ unsigned send_lpm:1; -+ /** LPM Retry status (LPM_RetryCnt_Sts) (Host) -+ * Number of LPM Host Retries still remaining -+ * to be transmitted for the current LPM sequence -+ */ -+ unsigned retry_count_sts:3; -+ unsigned reserved28_29:2; -+ /** In host mode once this bit is set, the host -+ * configures to drive the HSIC Idle state on the bus. -+ * It then waits for the device to initiate the Connect sequence. -+ * In device mode once this bit is set, the device waits for -+ * the HSIC Idle line state on the bus. Upon receving the Idle -+ * line state, it initiates the HSIC Connect sequence. -+ */ -+ unsigned hsic_connect:1; -+ /** This bit overrides and functionally inverts -+ * the if_select_hsic input port signal. -+ */ -+ unsigned inv_sel_hsic:1; -+ } b; -+} glpmcfg_data_t; -+ -+/** -+ * This union represents the bit fields of the Core ADP Timer, Control and -+ * Status Register (ADPTIMCTLSTS). Set the bits using bit fields then write -+ * the d32 value to the register. -+ */ -+typedef union adpctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Probe Discharge (PRB_DSCHG) -+ * These bits set the times for TADP_DSCHG. -+ * These bits are defined as follows: -+ * 2'b00 - 4 msec -+ * 2'b01 - 8 msec -+ * 2'b10 - 16 msec -+ * 2'b11 - 32 msec -+ */ -+ unsigned prb_dschg:2; -+ /** Probe Delta (PRB_DELTA) -+ * These bits set the resolution for RTIM value. -+ * The bits are defined in units of 32 kHz clock cycles as follows: -+ * 2'b00 - 1 cycles -+ * 2'b01 - 2 cycles -+ * 2'b10 - 3 cycles -+ * 2'b11 - 4 cycles -+ * For example if this value is chosen to 2'b01, it means that RTIM -+ * increments for every 3(three) 32Khz clock cycles. -+ */ -+ unsigned prb_delta:2; -+ /** Probe Period (PRB_PER) -+ * These bits sets the TADP_PRD as shown in Figure 4 as follows: -+ * 2'b00 - 0.625 to 0.925 sec (typical 0.775 sec) -+ * 2'b01 - 1.25 to 1.85 sec (typical 1.55 sec) -+ * 2'b10 - 1.9 to 2.6 sec (typical 2.275 sec) -+ * 2'b11 - Reserved -+ */ -+ unsigned prb_per:2; -+ /** These bits capture the latest time it took for VBUS to ramp from -+ * VADP_SINK to VADP_PRB. -+ * 0x000 - 1 cycles -+ * 0x001 - 2 cycles -+ * 0x002 - 3 cycles -+ * etc -+ * 0x7FF - 2048 cycles -+ * A time of 1024 cycles at 32 kHz corresponds to a time of 32 msec. -+ */ -+ unsigned rtim:11; -+ /** Enable Probe (EnaPrb) -+ * When programmed to 1'b1, the core performs a probe operation. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned enaprb:1; -+ /** Enable Sense (EnaSns) -+ * When programmed to 1'b1, the core performs a Sense operation. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned enasns:1; -+ /** ADP Reset (ADPRes) -+ * When set, ADP controller is reset. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned adpres:1; -+ /** ADP Enable (ADPEn) -+ * When set, the core performs either ADP probing or sensing -+ * based on EnaPrb or EnaSns. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned adpen:1; -+ /** ADP Probe Interrupt (ADP_PRB_INT) -+ * When this bit is set, it means that the VBUS -+ * voltage is greater than VADP_PRB or VADP_PRB is reached. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned adp_prb_int:1; -+ /** -+ * ADP Sense Interrupt (ADP_SNS_INT) -+ * When this bit is set, it means that the VBUS voltage is greater than -+ * VADP_SNS value or VADP_SNS is reached. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned adp_sns_int:1; -+ /** ADP Tomeout Interrupt (ADP_TMOUT_INT) -+ * This bit is relevant only for an ADP probe. -+ * When this bit is set, it means that the ramp time has -+ * completed ie ADPCTL.RTIM has reached its terminal value -+ * of 0x7FF. This is a debug feature that allows software -+ * to read the ramp time after each cycle. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned adp_tmout_int:1; -+ /** ADP Probe Interrupt Mask (ADP_PRB_INT_MSK) -+ * When this bit is set, it unmasks the interrupt due to ADP_PRB_INT. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned adp_prb_int_msk:1; -+ /** ADP Sense Interrupt Mask (ADP_SNS_INT_MSK) -+ * When this bit is set, it unmasks the interrupt due to ADP_SNS_INT. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned adp_sns_int_msk:1; -+ /** ADP Timoeout Interrupt Mask (ADP_TMOUT_MSK) -+ * When this bit is set, it unmasks the interrupt due to ADP_TMOUT_INT. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned adp_tmout_int_msk:1; -+ /** Access Request -+ * 2'b00 - Read/Write Valid (updated by the core) -+ * 2'b01 - Read -+ * 2'b00 - Write -+ * 2'b00 - Reserved -+ */ -+ unsigned ar:2; -+ /** Reserved */ -+ unsigned reserved29_31:3; -+ } b; -+} adpctl_data_t; -+ -+//////////////////////////////////////////// -+// Device Registers -+/** -+ * Device Global Registers. Offsets 800h-BFFh -+ * -+ * The following structures define the size and relative field offsets -+ * for the Device Mode Registers. -+ * -+ * These registers are visible only in Device mode and must not be -+ * accessed in Host mode, as the results are unknown. -+ */ -+typedef struct dwc_otg_dev_global_regs { -+ /** Device Configuration Register. Offset 800h */ -+ volatile uint32_t dcfg; -+ /** Device Control Register. Offset: 804h */ -+ volatile uint32_t dctl; -+ /** Device Status Register (Read Only). Offset: 808h */ -+ volatile uint32_t dsts; -+ /** Reserved. Offset: 80Ch */ -+ uint32_t unused; -+ /** Device IN Endpoint Common Interrupt Mask -+ * Register. Offset: 810h */ -+ volatile uint32_t diepmsk; -+ /** Device OUT Endpoint Common Interrupt Mask -+ * Register. Offset: 814h */ -+ volatile uint32_t doepmsk; -+ /** Device All Endpoints Interrupt Register. Offset: 818h */ -+ volatile uint32_t daint; -+ /** Device All Endpoints Interrupt Mask Register. Offset: -+ * 81Ch */ -+ volatile uint32_t daintmsk; -+ /** Device IN Token Queue Read Register-1 (Read Only). -+ * Offset: 820h */ -+ volatile uint32_t dtknqr1; -+ /** Device IN Token Queue Read Register-2 (Read Only). -+ * Offset: 824h */ -+ volatile uint32_t dtknqr2; -+ /** Device VBUS discharge Register. Offset: 828h */ -+ volatile uint32_t dvbusdis; -+ /** Device VBUS Pulse Register. Offset: 82Ch */ -+ volatile uint32_t dvbuspulse; -+ /** Device IN Token Queue Read Register-3 (Read Only). / -+ * Device Thresholding control register (Read/Write) -+ * Offset: 830h */ -+ volatile uint32_t dtknqr3_dthrctl; -+ /** Device IN Token Queue Read Register-4 (Read Only). / -+ * Device IN EPs empty Inr. Mask Register (Read/Write) -+ * Offset: 834h */ -+ volatile uint32_t dtknqr4_fifoemptymsk; -+ /** Device Each Endpoint Interrupt Register (Read Only). / -+ * Offset: 838h */ -+ volatile uint32_t deachint; -+ /** Device Each Endpoint Interrupt mask Register (Read/Write). / -+ * Offset: 83Ch */ -+ volatile uint32_t deachintmsk; -+ /** Device Each In Endpoint Interrupt mask Register (Read/Write). / -+ * Offset: 840h */ -+ volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS]; -+ /** Device Each Out Endpoint Interrupt mask Register (Read/Write). / -+ * Offset: 880h */ -+ volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS]; -+} dwc_otg_device_global_regs_t; -+ -+/** -+ * This union represents the bit fields in the Device Configuration -+ * Register. Read the register into the d32 member then -+ * set/clear the bits using the bit elements. Write the -+ * d32 member to the dcfg register. -+ */ -+typedef union dcfg_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Device Speed */ -+ unsigned devspd:2; -+ /** Non Zero Length Status OUT Handshake */ -+ unsigned nzstsouthshk:1; -+#define DWC_DCFG_SEND_STALL 1 -+ -+ unsigned ena32khzs:1; -+ /** Device Addresses */ -+ unsigned devaddr:7; -+ /** Periodic Frame Interval */ -+ unsigned perfrint:2; -+#define DWC_DCFG_FRAME_INTERVAL_80 0 -+#define DWC_DCFG_FRAME_INTERVAL_85 1 -+#define DWC_DCFG_FRAME_INTERVAL_90 2 -+#define DWC_DCFG_FRAME_INTERVAL_95 3 -+ -+ /** Enable Device OUT NAK for bulk in DDMA mode */ -+ unsigned endevoutnak:1; -+ -+ unsigned reserved14_17:4; -+ /** In Endpoint Mis-match count */ -+ unsigned epmscnt:5; -+ /** Enable Descriptor DMA in Device mode */ -+ unsigned descdma:1; -+ unsigned perschintvl:2; -+ unsigned resvalid:6; -+ } b; -+} dcfg_data_t; -+ -+/** -+ * This union represents the bit fields in the Device Control -+ * Register. Read the register into the d32 member then -+ * set/clear the bits using the bit elements. -+ */ -+typedef union dctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Remote Wakeup */ -+ unsigned rmtwkupsig:1; -+ /** Soft Disconnect */ -+ unsigned sftdiscon:1; -+ /** Global Non-Periodic IN NAK Status */ -+ unsigned gnpinnaksts:1; -+ /** Global OUT NAK Status */ -+ unsigned goutnaksts:1; -+ /** Test Control */ -+ unsigned tstctl:3; -+ /** Set Global Non-Periodic IN NAK */ -+ unsigned sgnpinnak:1; -+ /** Clear Global Non-Periodic IN NAK */ -+ unsigned cgnpinnak:1; -+ /** Set Global OUT NAK */ -+ unsigned sgoutnak:1; -+ /** Clear Global OUT NAK */ -+ unsigned cgoutnak:1; -+ /** Power-On Programming Done */ -+ unsigned pwronprgdone:1; -+ /** Reserved */ -+ unsigned reserved:1; -+ /** Global Multi Count */ -+ unsigned gmc:2; -+ /** Ignore Frame Number for ISOC EPs */ -+ unsigned ifrmnum:1; -+ /** NAK on Babble */ -+ unsigned nakonbble:1; -+ /** Enable Continue on BNA */ -+ unsigned encontonbna:1; -+ -+ unsigned reserved18_31:14; -+ } b; -+} dctl_data_t; -+ -+/** -+ * This union represents the bit fields in the Device Status -+ * Register. Read the register into the d32 member then -+ * set/clear the bits using the bit elements. -+ */ -+typedef union dsts_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Suspend Status */ -+ unsigned suspsts:1; -+ /** Enumerated Speed */ -+ unsigned enumspd:2; -+#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0 -+#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1 -+#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2 -+#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3 -+ /** Erratic Error */ -+ unsigned errticerr:1; -+ unsigned reserved4_7:4; -+ /** Frame or Microframe Number of the received SOF */ -+ unsigned soffn:14; -+ unsigned reserved22_31:10; -+ } b; -+} dsts_data_t; -+ -+/** -+ * This union represents the bit fields in the Device IN EP Interrupt -+ * Register and the Device IN EP Common Mask Register. -+ * -+ * - Read the register into the d32 member then set/clear the -+ * bits using the bit elements. -+ */ -+typedef union diepint_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Transfer complete mask */ -+ unsigned xfercompl:1; -+ /** Endpoint disable mask */ -+ unsigned epdisabled:1; -+ /** AHB Error mask */ -+ unsigned ahberr:1; -+ /** TimeOUT Handshake mask (non-ISOC EPs) */ -+ unsigned timeout:1; -+ /** IN Token received with TxF Empty mask */ -+ unsigned intktxfemp:1; -+ /** IN Token Received with EP mismatch mask */ -+ unsigned intknepmis:1; -+ /** IN Endpoint NAK Effective mask */ -+ unsigned inepnakeff:1; -+ /** Reserved */ -+ unsigned emptyintr:1; -+ -+ unsigned txfifoundrn:1; -+ -+ /** BNA Interrupt mask */ -+ unsigned bna:1; -+ -+ unsigned reserved10_12:3; -+ /** BNA Interrupt mask */ -+ unsigned nak:1; -+ -+ unsigned reserved14_31:18; -+ } b; -+} diepint_data_t; -+ -+/** -+ * This union represents the bit fields in the Device IN EP -+ * Common/Dedicated Interrupt Mask Register. -+ */ -+typedef union diepint_data diepmsk_data_t; -+ -+/** -+ * This union represents the bit fields in the Device OUT EP Interrupt -+ * Registerand Device OUT EP Common Interrupt Mask Register. -+ * -+ * - Read the register into the d32 member then set/clear the -+ * bits using the bit elements. -+ */ -+typedef union doepint_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Transfer complete */ -+ unsigned xfercompl:1; -+ /** Endpoint disable */ -+ unsigned epdisabled:1; -+ /** AHB Error */ -+ unsigned ahberr:1; -+ /** Setup Phase Done (contorl EPs) */ -+ unsigned setup:1; -+ /** OUT Token Received when Endpoint Disabled */ -+ unsigned outtknepdis:1; -+ -+ unsigned stsphsercvd:1; -+ /** Back-to-Back SETUP Packets Received */ -+ unsigned back2backsetup:1; -+ -+ unsigned reserved7:1; -+ /** OUT packet Error */ -+ unsigned outpkterr:1; -+ /** BNA Interrupt */ -+ unsigned bna:1; -+ -+ unsigned reserved10:1; -+ /** Packet Drop Status */ -+ unsigned pktdrpsts:1; -+ /** Babble Interrupt */ -+ unsigned babble:1; -+ /** NAK Interrupt */ -+ unsigned nak:1; -+ /** NYET Interrupt */ -+ unsigned nyet:1; -+ /** Bit indicating setup packet received */ -+ unsigned sr:1; -+ -+ unsigned reserved16_31:16; -+ } b; -+} doepint_data_t; -+ -+/** -+ * This union represents the bit fields in the Device OUT EP -+ * Common/Dedicated Interrupt Mask Register. -+ */ -+typedef union doepint_data doepmsk_data_t; -+ -+/** -+ * This union represents the bit fields in the Device All EP Interrupt -+ * and Mask Registers. -+ * - Read the register into the d32 member then set/clear the -+ * bits using the bit elements. -+ */ -+typedef union daint_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** IN Endpoint bits */ -+ unsigned in:16; -+ /** OUT Endpoint bits */ -+ unsigned out:16; -+ } ep; -+ struct { -+ /** IN Endpoint bits */ -+ unsigned inep0:1; -+ unsigned inep1:1; -+ unsigned inep2:1; -+ unsigned inep3:1; -+ unsigned inep4:1; -+ unsigned inep5:1; -+ unsigned inep6:1; -+ unsigned inep7:1; -+ unsigned inep8:1; -+ unsigned inep9:1; -+ unsigned inep10:1; -+ unsigned inep11:1; -+ unsigned inep12:1; -+ unsigned inep13:1; -+ unsigned inep14:1; -+ unsigned inep15:1; -+ /** OUT Endpoint bits */ -+ unsigned outep0:1; -+ unsigned outep1:1; -+ unsigned outep2:1; -+ unsigned outep3:1; -+ unsigned outep4:1; -+ unsigned outep5:1; -+ unsigned outep6:1; -+ unsigned outep7:1; -+ unsigned outep8:1; -+ unsigned outep9:1; -+ unsigned outep10:1; -+ unsigned outep11:1; -+ unsigned outep12:1; -+ unsigned outep13:1; -+ unsigned outep14:1; -+ unsigned outep15:1; -+ } b; -+} daint_data_t; -+ -+/** -+ * This union represents the bit fields in the Device IN Token Queue -+ * Read Registers. -+ * - Read the register into the d32 member. -+ * - READ-ONLY Register -+ */ -+typedef union dtknq1_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** In Token Queue Write Pointer */ -+ unsigned intknwptr:5; -+ /** Reserved */ -+ unsigned reserved05_06:2; -+ /** write pointer has wrapped. */ -+ unsigned wrap_bit:1; -+ /** EP Numbers of IN Tokens 0 ... 4 */ -+ unsigned epnums0_5:24; -+ } b; -+} dtknq1_data_t; -+ -+/** -+ * This union represents Threshold control Register -+ * - Read and write the register into the d32 member. -+ * - READ-WRITABLE Register -+ */ -+typedef union dthrctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** non ISO Tx Thr. Enable */ -+ unsigned non_iso_thr_en:1; -+ /** ISO Tx Thr. Enable */ -+ unsigned iso_thr_en:1; -+ /** Tx Thr. Length */ -+ unsigned tx_thr_len:9; -+ /** AHB Threshold ratio */ -+ unsigned ahb_thr_ratio:2; -+ /** Reserved */ -+ unsigned reserved13_15:3; -+ /** Rx Thr. Enable */ -+ unsigned rx_thr_en:1; -+ /** Rx Thr. Length */ -+ unsigned rx_thr_len:9; -+ unsigned reserved26:1; -+ /** Arbiter Parking Enable*/ -+ unsigned arbprken:1; -+ /** Reserved */ -+ unsigned reserved28_31:4; -+ } b; -+} dthrctl_data_t; -+ -+/** -+ * Device Logical IN Endpoint-Specific Registers. Offsets -+ * 900h-AFCh -+ * -+ * There will be one set of endpoint registers per logical endpoint -+ * implemented. -+ * -+ * These registers are visible only in Device mode and must not be -+ * accessed in Host mode, as the results are unknown. -+ */ -+typedef struct dwc_otg_dev_in_ep_regs { -+ /** Device IN Endpoint Control Register. Offset:900h + -+ * (ep_num * 20h) + 00h */ -+ volatile uint32_t diepctl; -+ /** Reserved. Offset:900h + (ep_num * 20h) + 04h */ -+ uint32_t reserved04; -+ /** Device IN Endpoint Interrupt Register. Offset:900h + -+ * (ep_num * 20h) + 08h */ -+ volatile uint32_t diepint; -+ /** Reserved. Offset:900h + (ep_num * 20h) + 0Ch */ -+ uint32_t reserved0C; -+ /** Device IN Endpoint Transfer Size -+ * Register. Offset:900h + (ep_num * 20h) + 10h */ -+ volatile uint32_t dieptsiz; -+ /** Device IN Endpoint DMA Address Register. Offset:900h + -+ * (ep_num * 20h) + 14h */ -+ volatile uint32_t diepdma; -+ /** Device IN Endpoint Transmit FIFO Status Register. Offset:900h + -+ * (ep_num * 20h) + 18h */ -+ volatile uint32_t dtxfsts; -+ /** Device IN Endpoint DMA Buffer Register. Offset:900h + -+ * (ep_num * 20h) + 1Ch */ -+ volatile uint32_t diepdmab; -+} dwc_otg_dev_in_ep_regs_t; -+ -+/** -+ * Device Logical OUT Endpoint-Specific Registers. Offsets: -+ * B00h-CFCh -+ * -+ * There will be one set of endpoint registers per logical endpoint -+ * implemented. -+ * -+ * These registers are visible only in Device mode and must not be -+ * accessed in Host mode, as the results are unknown. -+ */ -+typedef struct dwc_otg_dev_out_ep_regs { -+ /** Device OUT Endpoint Control Register. Offset:B00h + -+ * (ep_num * 20h) + 00h */ -+ volatile uint32_t doepctl; -+ /** Reserved. Offset:B00h + (ep_num * 20h) + 04h */ -+ uint32_t reserved04; -+ /** Device OUT Endpoint Interrupt Register. Offset:B00h + -+ * (ep_num * 20h) + 08h */ -+ volatile uint32_t doepint; -+ /** Reserved. Offset:B00h + (ep_num * 20h) + 0Ch */ -+ uint32_t reserved0C; -+ /** Device OUT Endpoint Transfer Size Register. Offset: -+ * B00h + (ep_num * 20h) + 10h */ -+ volatile uint32_t doeptsiz; -+ /** Device OUT Endpoint DMA Address Register. Offset:B00h -+ * + (ep_num * 20h) + 14h */ -+ volatile uint32_t doepdma; -+ /** Reserved. Offset:B00h + * (ep_num * 20h) + 18h */ -+ uint32_t unused; -+ /** Device OUT Endpoint DMA Buffer Register. Offset:B00h -+ * + (ep_num * 20h) + 1Ch */ -+ uint32_t doepdmab; -+} dwc_otg_dev_out_ep_regs_t; -+ -+/** -+ * This union represents the bit fields in the Device EP Control -+ * Register. Read the register into the d32 member then -+ * set/clear the bits using the bit elements. -+ */ -+typedef union depctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Maximum Packet Size -+ * IN/OUT EPn -+ * IN/OUT EP0 - 2 bits -+ * 2'b00: 64 Bytes -+ * 2'b01: 32 -+ * 2'b10: 16 -+ * 2'b11: 8 */ -+ unsigned mps:11; -+#define DWC_DEP0CTL_MPS_64 0 -+#define DWC_DEP0CTL_MPS_32 1 -+#define DWC_DEP0CTL_MPS_16 2 -+#define DWC_DEP0CTL_MPS_8 3 -+ -+ /** Next Endpoint -+ * IN EPn/IN EP0 -+ * OUT EPn/OUT EP0 - reserved */ -+ unsigned nextep:4; -+ -+ /** USB Active Endpoint */ -+ unsigned usbactep:1; -+ -+ /** Endpoint DPID (INTR/Bulk IN and OUT endpoints) -+ * This field contains the PID of the packet going to -+ * be received or transmitted on this endpoint. The -+ * application should program the PID of the first -+ * packet going to be received or transmitted on this -+ * endpoint , after the endpoint is -+ * activated. Application use the SetD1PID and -+ * SetD0PID fields of this register to program either -+ * D0 or D1 PID. -+ * -+ * The encoding for this field is -+ * - 0: D0 -+ * - 1: D1 -+ */ -+ unsigned dpid:1; -+ -+ /** NAK Status */ -+ unsigned naksts:1; -+ -+ /** Endpoint Type -+ * 2'b00: Control -+ * 2'b01: Isochronous -+ * 2'b10: Bulk -+ * 2'b11: Interrupt */ -+ unsigned eptype:2; -+ -+ /** Snoop Mode -+ * OUT EPn/OUT EP0 -+ * IN EPn/IN EP0 - reserved */ -+ unsigned snp:1; -+ -+ /** Stall Handshake */ -+ unsigned stall:1; -+ -+ /** Tx Fifo Number -+ * IN EPn/IN EP0 -+ * OUT EPn/OUT EP0 - reserved */ -+ unsigned txfnum:4; -+ -+ /** Clear NAK */ -+ unsigned cnak:1; -+ /** Set NAK */ -+ unsigned snak:1; -+ /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints) -+ * Writing to this field sets the Endpoint DPID (DPID) -+ * field in this register to DATA0. Set Even -+ * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints) -+ * Writing to this field sets the Even/Odd -+ * (micro)frame (EO_FrNum) field to even (micro) -+ * frame. -+ */ -+ unsigned setd0pid:1; -+ /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints) -+ * Writing to this field sets the Endpoint DPID (DPID) -+ * field in this register to DATA1 Set Odd -+ * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints) -+ * Writing to this field sets the Even/Odd -+ * (micro)frame (EO_FrNum) field to odd (micro) frame. -+ */ -+ unsigned setd1pid:1; -+ -+ /** Endpoint Disable */ -+ unsigned epdis:1; -+ /** Endpoint Enable */ -+ unsigned epena:1; -+ } b; -+} depctl_data_t; -+ -+/** -+ * This union represents the bit fields in the Device EP Transfer -+ * Size Register. Read the register into the d32 member then -+ * set/clear the bits using the bit elements. -+ */ -+typedef union deptsiz_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Transfer size */ -+ unsigned xfersize:19; -+/** Max packet count for EP (pow(2,10)-1) */ -+#define MAX_PKT_CNT 1023 -+ /** Packet Count */ -+ unsigned pktcnt:10; -+ /** Multi Count - Periodic IN endpoints */ -+ unsigned mc:2; -+ unsigned reserved:1; -+ } b; -+} deptsiz_data_t; -+ -+/** -+ * This union represents the bit fields in the Device EP 0 Transfer -+ * Size Register. Read the register into the d32 member then -+ * set/clear the bits using the bit elements. -+ */ -+typedef union deptsiz0_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Transfer size */ -+ unsigned xfersize:7; -+ /** Reserved */ -+ unsigned reserved7_18:12; -+ /** Packet Count */ -+ unsigned pktcnt:2; -+ /** Reserved */ -+ unsigned reserved21_28:8; -+ /**Setup Packet Count (DOEPTSIZ0 Only) */ -+ unsigned supcnt:2; -+ unsigned reserved31; -+ } b; -+} deptsiz0_data_t; -+ -+///////////////////////////////////////////////// -+// DMA Descriptor Specific Structures -+// -+ -+/** Buffer status definitions */ -+ -+#define BS_HOST_READY 0x0 -+#define BS_DMA_BUSY 0x1 -+#define BS_DMA_DONE 0x2 -+#define BS_HOST_BUSY 0x3 -+ -+/** Receive/Transmit status definitions */ -+ -+#define RTS_SUCCESS 0x0 -+#define RTS_BUFFLUSH 0x1 -+#define RTS_RESERVED 0x2 -+#define RTS_BUFERR 0x3 -+ -+/** -+ * This union represents the bit fields in the DMA Descriptor -+ * status quadlet. Read the quadlet into the d32 member then -+ * set/clear the bits using the bit, b_iso_out and -+ * b_iso_in elements. -+ */ -+typedef union dev_dma_desc_sts { -+ /** raw register data */ -+ uint32_t d32; -+ /** quadlet bits */ -+ struct { -+ /** Received number of bytes */ -+ unsigned bytes:16; -+ /** NAK bit - only for OUT EPs */ -+ unsigned nak:1; -+ unsigned reserved17_22:6; -+ /** Multiple Transfer - only for OUT EPs */ -+ unsigned mtrf:1; -+ /** Setup Packet received - only for OUT EPs */ -+ unsigned sr:1; -+ /** Interrupt On Complete */ -+ unsigned ioc:1; -+ /** Short Packet */ -+ unsigned sp:1; -+ /** Last */ -+ unsigned l:1; -+ /** Receive Status */ -+ unsigned sts:2; -+ /** Buffer Status */ -+ unsigned bs:2; -+ } b; -+ -+//#ifdef DWC_EN_ISOC -+ /** iso out quadlet bits */ -+ struct { -+ /** Received number of bytes */ -+ unsigned rxbytes:11; -+ -+ unsigned reserved11:1; -+ /** Frame Number */ -+ unsigned framenum:11; -+ /** Received ISO Data PID */ -+ unsigned pid:2; -+ /** Interrupt On Complete */ -+ unsigned ioc:1; -+ /** Short Packet */ -+ unsigned sp:1; -+ /** Last */ -+ unsigned l:1; -+ /** Receive Status */ -+ unsigned rxsts:2; -+ /** Buffer Status */ -+ unsigned bs:2; -+ } b_iso_out; -+ -+ /** iso in quadlet bits */ -+ struct { -+ /** Transmited number of bytes */ -+ unsigned txbytes:12; -+ /** Frame Number */ -+ unsigned framenum:11; -+ /** Transmited ISO Data PID */ -+ unsigned pid:2; -+ /** Interrupt On Complete */ -+ unsigned ioc:1; -+ /** Short Packet */ -+ unsigned sp:1; -+ /** Last */ -+ unsigned l:1; -+ /** Transmit Status */ -+ unsigned txsts:2; -+ /** Buffer Status */ -+ unsigned bs:2; -+ } b_iso_in; -+//#endif /* DWC_EN_ISOC */ -+} dev_dma_desc_sts_t; -+ -+/** -+ * DMA Descriptor structure -+ * -+ * DMA Descriptor structure contains two quadlets: -+ * Status quadlet and Data buffer pointer. -+ */ -+typedef struct dwc_otg_dev_dma_desc { -+ /** DMA Descriptor status quadlet */ -+ dev_dma_desc_sts_t status; -+ /** DMA Descriptor data buffer pointer */ -+ uint32_t buf; -+} dwc_otg_dev_dma_desc_t; -+ -+/** -+ * The dwc_otg_dev_if structure contains information needed to manage -+ * the DWC_otg controller acting in device mode. It represents the -+ * programming view of the device-specific aspects of the controller. -+ */ -+typedef struct dwc_otg_dev_if { -+ /** Pointer to device Global registers. -+ * Device Global Registers starting at offset 800h -+ */ -+ dwc_otg_device_global_regs_t *dev_global_regs; -+#define DWC_DEV_GLOBAL_REG_OFFSET 0x800 -+ -+ /** -+ * Device Logical IN Endpoint-Specific Registers 900h-AFCh -+ */ -+ dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS]; -+#define DWC_DEV_IN_EP_REG_OFFSET 0x900 -+#define DWC_EP_REG_OFFSET 0x20 -+ -+ /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */ -+ dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS]; -+#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00 -+ -+ /* Device configuration information */ -+ uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */ -+ uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */ -+ uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/ -+ -+ /** Size of periodic FIFOs (Bytes) */ -+ uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS]; -+ -+ /** Size of Tx FIFOs (Bytes) */ -+ uint16_t tx_fifo_size[MAX_TX_FIFOS]; -+ -+ /** Thresholding enable flags and length varaiables **/ -+ uint16_t rx_thr_en; -+ uint16_t iso_tx_thr_en; -+ uint16_t non_iso_tx_thr_en; -+ -+ uint16_t rx_thr_length; -+ uint16_t tx_thr_length; -+ -+ /** -+ * Pointers to the DMA Descriptors for EP0 Control -+ * transfers (virtual and physical) -+ */ -+ -+ /** 2 descriptors for SETUP packets */ -+ dwc_dma_t dma_setup_desc_addr[2]; -+ dwc_otg_dev_dma_desc_t *setup_desc_addr[2]; -+ -+ /** Pointer to Descriptor with latest SETUP packet */ -+ dwc_otg_dev_dma_desc_t *psetup; -+ -+ /** Index of current SETUP handler descriptor */ -+ uint32_t setup_desc_index; -+ -+ /** Descriptor for Data In or Status In phases */ -+ dwc_dma_t dma_in_desc_addr; -+ dwc_otg_dev_dma_desc_t *in_desc_addr; -+ -+ /** Descriptor for Data Out or Status Out phases */ -+ dwc_dma_t dma_out_desc_addr; -+ dwc_otg_dev_dma_desc_t *out_desc_addr; -+ -+ /** Setup Packet Detected - if set clear NAK when queueing */ -+ uint32_t spd; -+ /** Isoc ep pointer on which incomplete happens */ -+ void *isoc_ep; -+ -+} dwc_otg_dev_if_t; -+ -+///////////////////////////////////////////////// -+// Host Mode Register Structures -+// -+/** -+ * The Host Global Registers structure defines the size and relative -+ * field offsets for the Host Mode Global Registers. Host Global -+ * Registers offsets 400h-7FFh. -+*/ -+typedef struct dwc_otg_host_global_regs { -+ /** Host Configuration Register. Offset: 400h */ -+ volatile uint32_t hcfg; -+ /** Host Frame Interval Register. Offset: 404h */ -+ volatile uint32_t hfir; -+ /** Host Frame Number / Frame Remaining Register. Offset: 408h */ -+ volatile uint32_t hfnum; -+ /** Reserved. Offset: 40Ch */ -+ uint32_t reserved40C; -+ /** Host Periodic Transmit FIFO/ Queue Status Register. Offset: 410h */ -+ volatile uint32_t hptxsts; -+ /** Host All Channels Interrupt Register. Offset: 414h */ -+ volatile uint32_t haint; -+ /** Host All Channels Interrupt Mask Register. Offset: 418h */ -+ volatile uint32_t haintmsk; -+ /** Host Frame List Base Address Register . Offset: 41Ch */ -+ volatile uint32_t hflbaddr; -+} dwc_otg_host_global_regs_t; -+ -+/** -+ * This union represents the bit fields in the Host Configuration Register. -+ * Read the register into the d32 member then set/clear the bits using -+ * the bit elements. Write the d32 member to the hcfg register. -+ */ -+typedef union hcfg_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ /** FS/LS Phy Clock Select */ -+ unsigned fslspclksel:2; -+#define DWC_HCFG_30_60_MHZ 0 -+#define DWC_HCFG_48_MHZ 1 -+#define DWC_HCFG_6_MHZ 2 -+ -+ /** FS/LS Only Support */ -+ unsigned fslssupp:1; -+ unsigned reserved3_6:4; -+ /** Enable 32-KHz Suspend Mode */ -+ unsigned ena32khzs:1; -+ /** Resume Validation Periiod */ -+ unsigned resvalid:8; -+ unsigned reserved16_22:7; -+ /** Enable Scatter/gather DMA in Host mode */ -+ unsigned descdma:1; -+ /** Frame List Entries */ -+ unsigned frlisten:2; -+ /** Enable Periodic Scheduling */ -+ unsigned perschedena:1; -+ unsigned reserved27_30:4; -+ unsigned modechtimen:1; -+ } b; -+} hcfg_data_t; -+ -+/** -+ * This union represents the bit fields in the Host Frame Remaing/Number -+ * Register. -+ */ -+typedef union hfir_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ unsigned frint:16; -+ unsigned hfirrldctrl:1; -+ unsigned reserved:15; -+ } b; -+} hfir_data_t; -+ -+/** -+ * This union represents the bit fields in the Host Frame Remaing/Number -+ * Register. -+ */ -+typedef union hfnum_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ unsigned frnum:16; -+#define DWC_HFNUM_MAX_FRNUM 0x3FFF -+ unsigned frrem:16; -+ } b; -+} hfnum_data_t; -+ -+typedef union hptxsts_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ unsigned ptxfspcavail:16; -+ unsigned ptxqspcavail:8; -+ /** Top of the Periodic Transmit Request Queue -+ * - bit 24 - Terminate (last entry for the selected channel) -+ * - bits 26:25 - Token Type -+ * - 2'b00 - Zero length -+ * - 2'b01 - Ping -+ * - 2'b10 - Disable -+ * - bits 30:27 - Channel Number -+ * - bit 31 - Odd/even microframe -+ */ -+ unsigned ptxqtop_terminate:1; -+ unsigned ptxqtop_token:2; -+ unsigned ptxqtop_chnum:4; -+ unsigned ptxqtop_odd:1; -+ } b; -+} hptxsts_data_t; -+ -+/** -+ * This union represents the bit fields in the Host Port Control and Status -+ * Register. Read the register into the d32 member then set/clear the -+ * bits using the bit elements. Write the d32 member to the -+ * hprt0 register. -+ */ -+typedef union hprt0_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned prtconnsts:1; -+ unsigned prtconndet:1; -+ unsigned prtena:1; -+ unsigned prtenchng:1; -+ unsigned prtovrcurract:1; -+ unsigned prtovrcurrchng:1; -+ unsigned prtres:1; -+ unsigned prtsusp:1; -+ unsigned prtrst:1; -+ unsigned reserved9:1; -+ unsigned prtlnsts:2; -+ unsigned prtpwr:1; -+ unsigned prttstctl:4; -+ unsigned prtspd:2; -+#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0 -+#define DWC_HPRT0_PRTSPD_FULL_SPEED 1 -+#define DWC_HPRT0_PRTSPD_LOW_SPEED 2 -+ unsigned reserved19_31:13; -+ } b; -+} hprt0_data_t; -+ -+/** -+ * This union represents the bit fields in the Host All Interrupt -+ * Register. -+ */ -+typedef union haint_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned ch0:1; -+ unsigned ch1:1; -+ unsigned ch2:1; -+ unsigned ch3:1; -+ unsigned ch4:1; -+ unsigned ch5:1; -+ unsigned ch6:1; -+ unsigned ch7:1; -+ unsigned ch8:1; -+ unsigned ch9:1; -+ unsigned ch10:1; -+ unsigned ch11:1; -+ unsigned ch12:1; -+ unsigned ch13:1; -+ unsigned ch14:1; -+ unsigned ch15:1; -+ unsigned reserved:16; -+ } b; -+ -+ struct { -+ unsigned chint:16; -+ unsigned reserved:16; -+ } b2; -+} haint_data_t; -+ -+/** -+ * This union represents the bit fields in the Host All Interrupt -+ * Register. -+ */ -+typedef union haintmsk_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned ch0:1; -+ unsigned ch1:1; -+ unsigned ch2:1; -+ unsigned ch3:1; -+ unsigned ch4:1; -+ unsigned ch5:1; -+ unsigned ch6:1; -+ unsigned ch7:1; -+ unsigned ch8:1; -+ unsigned ch9:1; -+ unsigned ch10:1; -+ unsigned ch11:1; -+ unsigned ch12:1; -+ unsigned ch13:1; -+ unsigned ch14:1; -+ unsigned ch15:1; -+ unsigned reserved:16; -+ } b; -+ -+ struct { -+ unsigned chint:16; -+ unsigned reserved:16; -+ } b2; -+} haintmsk_data_t; -+ -+/** -+ * Host Channel Specific Registers. 500h-5FCh -+ */ -+typedef struct dwc_otg_hc_regs { -+ /** Host Channel 0 Characteristic Register. Offset: 500h + (chan_num * 20h) + 00h */ -+ volatile uint32_t hcchar; -+ /** Host Channel 0 Split Control Register. Offset: 500h + (chan_num * 20h) + 04h */ -+ volatile uint32_t hcsplt; -+ /** Host Channel 0 Interrupt Register. Offset: 500h + (chan_num * 20h) + 08h */ -+ volatile uint32_t hcint; -+ /** Host Channel 0 Interrupt Mask Register. Offset: 500h + (chan_num * 20h) + 0Ch */ -+ volatile uint32_t hcintmsk; -+ /** Host Channel 0 Transfer Size Register. Offset: 500h + (chan_num * 20h) + 10h */ -+ volatile uint32_t hctsiz; -+ /** Host Channel 0 DMA Address Register. Offset: 500h + (chan_num * 20h) + 14h */ -+ volatile uint32_t hcdma; -+ volatile uint32_t reserved; -+ /** Host Channel 0 DMA Buffer Address Register. Offset: 500h + (chan_num * 20h) + 1Ch */ -+ volatile uint32_t hcdmab; -+} dwc_otg_hc_regs_t; -+ -+/** -+ * This union represents the bit fields in the Host Channel Characteristics -+ * Register. Read the register into the d32 member then set/clear the -+ * bits using the bit elements. Write the d32 member to the -+ * hcchar register. -+ */ -+typedef union hcchar_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ /** Maximum packet size in bytes */ -+ unsigned mps:11; -+ -+ /** Endpoint number */ -+ unsigned epnum:4; -+ -+ /** 0: OUT, 1: IN */ -+ unsigned epdir:1; -+ -+ unsigned reserved:1; -+ -+ /** 0: Full/high speed device, 1: Low speed device */ -+ unsigned lspddev:1; -+ -+ /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */ -+ unsigned eptype:2; -+ -+ /** Packets per frame for periodic transfers. 0 is reserved. */ -+ unsigned multicnt:2; -+ -+ /** Device address */ -+ unsigned devaddr:7; -+ -+ /** -+ * Frame to transmit periodic transaction. -+ * 0: even, 1: odd -+ */ -+ unsigned oddfrm:1; -+ -+ /** Channel disable */ -+ unsigned chdis:1; -+ -+ /** Channel enable */ -+ unsigned chen:1; -+ } b; -+} hcchar_data_t; -+ -+typedef union hcsplt_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ /** Port Address */ -+ unsigned prtaddr:7; -+ -+ /** Hub Address */ -+ unsigned hubaddr:7; -+ -+ /** Transaction Position */ -+ unsigned xactpos:2; -+#define DWC_HCSPLIT_XACTPOS_MID 0 -+#define DWC_HCSPLIT_XACTPOS_END 1 -+#define DWC_HCSPLIT_XACTPOS_BEGIN 2 -+#define DWC_HCSPLIT_XACTPOS_ALL 3 -+ -+ /** Do Complete Split */ -+ unsigned compsplt:1; -+ -+ /** Reserved */ -+ unsigned reserved:14; -+ -+ /** Split Enble */ -+ unsigned spltena:1; -+ } b; -+} hcsplt_data_t; -+ -+/** -+ * This union represents the bit fields in the Host All Interrupt -+ * Register. -+ */ -+typedef union hcint_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Transfer Complete */ -+ unsigned xfercomp:1; -+ /** Channel Halted */ -+ unsigned chhltd:1; -+ /** AHB Error */ -+ unsigned ahberr:1; -+ /** STALL Response Received */ -+ unsigned stall:1; -+ /** NAK Response Received */ -+ unsigned nak:1; -+ /** ACK Response Received */ -+ unsigned ack:1; -+ /** NYET Response Received */ -+ unsigned nyet:1; -+ /** Transaction Err */ -+ unsigned xacterr:1; -+ /** Babble Error */ -+ unsigned bblerr:1; -+ /** Frame Overrun */ -+ unsigned frmovrun:1; -+ /** Data Toggle Error */ -+ unsigned datatglerr:1; -+ /** Buffer Not Available (only for DDMA mode) */ -+ unsigned bna:1; -+ /** Exessive transaction error (only for DDMA mode) */ -+ unsigned xcs_xact:1; -+ /** Frame List Rollover interrupt */ -+ unsigned frm_list_roll:1; -+ /** Reserved */ -+ unsigned reserved14_31:18; -+ } b; -+} hcint_data_t; -+ -+/** -+ * This union represents the bit fields in the Host Channel Interrupt Mask -+ * Register. Read the register into the d32 member then set/clear the -+ * bits using the bit elements. Write the d32 member to the -+ * hcintmsk register. -+ */ -+typedef union hcintmsk_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ unsigned xfercompl:1; -+ unsigned chhltd:1; -+ unsigned ahberr:1; -+ unsigned stall:1; -+ unsigned nak:1; -+ unsigned ack:1; -+ unsigned nyet:1; -+ unsigned xacterr:1; -+ unsigned bblerr:1; -+ unsigned frmovrun:1; -+ unsigned datatglerr:1; -+ unsigned bna:1; -+ unsigned xcs_xact:1; -+ unsigned frm_list_roll:1; -+ unsigned reserved14_31:18; -+ } b; -+} hcintmsk_data_t; -+ -+/** -+ * This union represents the bit fields in the Host Channel Transfer Size -+ * Register. Read the register into the d32 member then set/clear the -+ * bits using the bit elements. Write the d32 member to the -+ * hcchar register. -+ */ -+ -+typedef union hctsiz_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ /** Total transfer size in bytes */ -+ unsigned xfersize:19; -+ -+ /** Data packets to transfer */ -+ unsigned pktcnt:10; -+ -+ /** -+ * Packet ID for next data packet -+ * 0: DATA0 -+ * 1: DATA2 -+ * 2: DATA1 -+ * 3: MDATA (non-Control), SETUP (Control) -+ */ -+ unsigned pid:2; -+#define DWC_HCTSIZ_DATA0 0 -+#define DWC_HCTSIZ_DATA1 2 -+#define DWC_HCTSIZ_DATA2 1 -+#define DWC_HCTSIZ_MDATA 3 -+#define DWC_HCTSIZ_SETUP 3 -+ -+ /** Do PING protocol when 1 */ -+ unsigned dopng:1; -+ } b; -+ -+ /** register bits */ -+ struct { -+ /** Scheduling information */ -+ unsigned schinfo:8; -+ -+ /** Number of transfer descriptors. -+ * Max value: -+ * 64 in general, -+ * 256 only for HS isochronous endpoint. -+ */ -+ unsigned ntd:8; -+ -+ /** Data packets to transfer */ -+ unsigned reserved16_28:13; -+ -+ /** -+ * Packet ID for next data packet -+ * 0: DATA0 -+ * 1: DATA2 -+ * 2: DATA1 -+ * 3: MDATA (non-Control) -+ */ -+ unsigned pid:2; -+ -+ /** Do PING protocol when 1 */ -+ unsigned dopng:1; -+ } b_ddma; -+} hctsiz_data_t; -+ -+/** -+ * This union represents the bit fields in the Host DMA Address -+ * Register used in Descriptor DMA mode. -+ */ -+typedef union hcdma_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned reserved0_2:3; -+ /** Current Transfer Descriptor. Not used for ISOC */ -+ unsigned ctd:8; -+ /** Start Address of Descriptor List */ -+ unsigned dma_addr:21; -+ } b; -+} hcdma_data_t; -+ -+/** -+ * This union represents the bit fields in the DMA Descriptor -+ * status quadlet for host mode. Read the quadlet into the d32 member then -+ * set/clear the bits using the bit elements. -+ */ -+typedef union host_dma_desc_sts { -+ /** raw register data */ -+ uint32_t d32; -+ /** quadlet bits */ -+ -+ /* for non-isochronous */ -+ struct { -+ /** Number of bytes */ -+ unsigned n_bytes:17; -+ /** QTD offset to jump when Short Packet received - only for IN EPs */ -+ unsigned qtd_offset:6; -+ /** -+ * Set to request the core to jump to alternate QTD if -+ * Short Packet received - only for IN EPs -+ */ -+ unsigned a_qtd:1; -+ /** -+ * Setup Packet bit. When set indicates that buffer contains -+ * setup packet. -+ */ -+ unsigned sup:1; -+ /** Interrupt On Complete */ -+ unsigned ioc:1; -+ /** End of List */ -+ unsigned eol:1; -+ unsigned reserved27:1; -+ /** Rx/Tx Status */ -+ unsigned sts:2; -+#define DMA_DESC_STS_PKTERR 1 -+ unsigned reserved30:1; -+ /** Active Bit */ -+ unsigned a:1; -+ } b; -+ /* for isochronous */ -+ struct { -+ /** Number of bytes */ -+ unsigned n_bytes:12; -+ unsigned reserved12_24:13; -+ /** Interrupt On Complete */ -+ unsigned ioc:1; -+ unsigned reserved26_27:2; -+ /** Rx/Tx Status */ -+ unsigned sts:2; -+ unsigned reserved30:1; -+ /** Active Bit */ -+ unsigned a:1; -+ } b_isoc; -+} host_dma_desc_sts_t; -+ -+#define MAX_DMA_DESC_SIZE 131071 -+#define MAX_DMA_DESC_NUM_GENERIC 64 -+#define MAX_DMA_DESC_NUM_HS_ISOC 256 -+#define MAX_FRLIST_EN_NUM 64 -+/** -+ * Host-mode DMA Descriptor structure -+ * -+ * DMA Descriptor structure contains two quadlets: -+ * Status quadlet and Data buffer pointer. -+ */ -+typedef struct dwc_otg_host_dma_desc { -+ /** DMA Descriptor status quadlet */ -+ host_dma_desc_sts_t status; -+ /** DMA Descriptor data buffer pointer */ -+ uint32_t buf; -+} dwc_otg_host_dma_desc_t; -+ -+/** OTG Host Interface Structure. -+ * -+ * The OTG Host Interface Structure structure contains information -+ * needed to manage the DWC_otg controller acting in host mode. It -+ * represents the programming view of the host-specific aspects of the -+ * controller. -+ */ -+typedef struct dwc_otg_host_if { -+ /** Host Global Registers starting at offset 400h.*/ -+ dwc_otg_host_global_regs_t *host_global_regs; -+#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400 -+ -+ /** Host Port 0 Control and Status Register */ -+ volatile uint32_t *hprt0; -+#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440 -+ -+ /** Host Channel Specific Registers at offsets 500h-5FCh. */ -+ dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS]; -+#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500 -+#define DWC_OTG_CHAN_REGS_OFFSET 0x20 -+ -+ /* Host configuration information */ -+ /** Number of Host Channels (range: 1-16) */ -+ uint8_t num_host_channels; -+ /** Periodic EPs supported (0: no, 1: yes) */ -+ uint8_t perio_eps_supported; -+ /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */ -+ uint16_t perio_tx_fifo_size; -+ -+} dwc_otg_host_if_t; -+ -+/** -+ * This union represents the bit fields in the Power and Clock Gating Control -+ * Register. Read the register into the d32 member then set/clear the -+ * bits using the bit elements. -+ */ -+typedef union pcgcctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ /** Stop Pclk */ -+ unsigned stoppclk:1; -+ /** Gate Hclk */ -+ unsigned gatehclk:1; -+ /** Power Clamp */ -+ unsigned pwrclmp:1; -+ /** Reset Power Down Modules */ -+ unsigned rstpdwnmodule:1; -+ /** Reserved */ -+ unsigned reserved:1; -+ /** Enable Sleep Clock Gating (Enbl_L1Gating) */ -+ unsigned enbl_sleep_gating:1; -+ /** PHY In Sleep (PhySleep) */ -+ unsigned phy_in_sleep:1; -+ /** Deep Sleep*/ -+ unsigned deep_sleep:1; -+ unsigned resetaftsusp:1; -+ unsigned restoremode:1; -+ unsigned enbl_extnd_hiber:1; -+ unsigned extnd_hiber_pwrclmp:1; -+ unsigned extnd_hiber_switch:1; -+ unsigned ess_reg_restored:1; -+ unsigned prt_clk_sel:2; -+ unsigned port_power:1; -+ unsigned max_xcvrselect:2; -+ unsigned max_termsel:1; -+ unsigned mac_dev_addr:7; -+ unsigned p2hd_dev_enum_spd:2; -+ unsigned p2hd_prt_spd:2; -+ unsigned if_dev_mode:1; -+ } b; -+} pcgcctl_data_t; -+ -+/** -+ * This union represents the bit fields in the Global Data FIFO Software -+ * Configuration Register. Read the register into the d32 member then -+ * set/clear the bits using the bit elements. -+ */ -+typedef union gdfifocfg_data { -+ /* raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** OTG Data FIFO depth */ -+ unsigned gdfifocfg:16; -+ /** Start address of EP info controller */ -+ unsigned epinfobase:16; -+ } b; -+} gdfifocfg_data_t; -+ -+/** -+ * This union represents the bit fields in the Global Power Down Register -+ * Register. Read the register into the d32 member then set/clear the -+ * bits using the bit elements. -+ */ -+typedef union gpwrdn_data { -+ /* raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ /** PMU Interrupt Select */ -+ unsigned pmuintsel:1; -+ /** PMU Active */ -+ unsigned pmuactv:1; -+ /** Restore */ -+ unsigned restore:1; -+ /** Power Down Clamp */ -+ unsigned pwrdnclmp:1; -+ /** Power Down Reset */ -+ unsigned pwrdnrstn:1; -+ /** Power Down Switch */ -+ unsigned pwrdnswtch:1; -+ /** Disable VBUS */ -+ unsigned dis_vbus:1; -+ /** Line State Change */ -+ unsigned lnstschng:1; -+ /** Line state change mask */ -+ unsigned lnstchng_msk:1; -+ /** Reset Detected */ -+ unsigned rst_det:1; -+ /** Reset Detect mask */ -+ unsigned rst_det_msk:1; -+ /** Disconnect Detected */ -+ unsigned disconn_det:1; -+ /** Disconnect Detect mask */ -+ unsigned disconn_det_msk:1; -+ /** Connect Detected*/ -+ unsigned connect_det:1; -+ /** Connect Detected Mask*/ -+ unsigned connect_det_msk:1; -+ /** SRP Detected */ -+ unsigned srp_det:1; -+ /** SRP Detect mask */ -+ unsigned srp_det_msk:1; -+ /** Status Change Interrupt */ -+ unsigned sts_chngint:1; -+ /** Status Change Interrupt Mask */ -+ unsigned sts_chngint_msk:1; -+ /** Line State */ -+ unsigned linestate:2; -+ /** Indicates current mode(status of IDDIG signal) */ -+ unsigned idsts:1; -+ /** B Session Valid signal status*/ -+ unsigned bsessvld:1; -+ /** ADP Event Detected */ -+ unsigned adp_int:1; -+ /** Multi Valued ID pin */ -+ unsigned mult_val_id_bc:5; -+ /** Reserved 24_31 */ -+ unsigned reserved29_31:3; -+ } b; -+} gpwrdn_data_t; -+ -+#endif ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/test/Makefile -@@ -0,0 +1,16 @@ -+ -+PERL=/usr/bin/perl -+PL_TESTS=test_sysfs.pl test_mod_param.pl -+ -+.PHONY : test -+test : perl_tests -+ -+perl_tests : -+ @echo -+ @echo Running perl tests -+ @for test in $(PL_TESTS); do \ -+ if $(PERL) ./$$test ; then \ -+ echo "=======> $$test, PASSED" ; \ -+ else echo "=======> $$test, FAILED" ; \ -+ fi \ -+ done ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm -@@ -0,0 +1,337 @@ -+package dwc_otg_test; -+ -+use strict; -+use Exporter (); -+ -+use vars qw(@ISA @EXPORT -+$sysfsdir $paramdir $errors $params -+); -+ -+@ISA = qw(Exporter); -+ -+# -+# Globals -+# -+$sysfsdir = "/sys/devices/lm0"; -+$paramdir = "/sys/module/dwc_otg"; -+$errors = 0; -+ -+$params = [ -+ { -+ NAME => "otg_cap", -+ DEFAULT => 0, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 2 -+ }, -+ { -+ NAME => "dma_enable", -+ DEFAULT => 0, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 1 -+ }, -+ { -+ NAME => "dma_burst_size", -+ DEFAULT => 32, -+ ENUM => [1, 4, 8, 16, 32, 64, 128, 256], -+ LOW => 1, -+ HIGH => 256 -+ }, -+ { -+ NAME => "host_speed", -+ DEFAULT => 0, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 1 -+ }, -+ { -+ NAME => "host_support_fs_ls_low_power", -+ DEFAULT => 0, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 1 -+ }, -+ { -+ NAME => "host_ls_low_power_phy_clk", -+ DEFAULT => 0, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 1 -+ }, -+ { -+ NAME => "dev_speed", -+ DEFAULT => 0, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 1 -+ }, -+ { -+ NAME => "enable_dynamic_fifo", -+ DEFAULT => 1, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 1 -+ }, -+ { -+ NAME => "data_fifo_size", -+ DEFAULT => 8192, -+ ENUM => [], -+ LOW => 32, -+ HIGH => 32768 -+ }, -+ { -+ NAME => "dev_rx_fifo_size", -+ DEFAULT => 1064, -+ ENUM => [], -+ LOW => 16, -+ HIGH => 32768 -+ }, -+ { -+ NAME => "dev_nperio_tx_fifo_size", -+ DEFAULT => 1024, -+ ENUM => [], -+ LOW => 16, -+ HIGH => 32768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_1", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_2", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_3", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_4", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_5", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_6", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_7", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_8", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_9", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_10", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_11", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_12", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_13", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_14", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_15", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "host_rx_fifo_size", -+ DEFAULT => 1024, -+ ENUM => [], -+ LOW => 16, -+ HIGH => 32768 -+ }, -+ { -+ NAME => "host_nperio_tx_fifo_size", -+ DEFAULT => 1024, -+ ENUM => [], -+ LOW => 16, -+ HIGH => 32768 -+ }, -+ { -+ NAME => "host_perio_tx_fifo_size", -+ DEFAULT => 1024, -+ ENUM => [], -+ LOW => 16, -+ HIGH => 32768 -+ }, -+ { -+ NAME => "max_transfer_size", -+ DEFAULT => 65535, -+ ENUM => [], -+ LOW => 2047, -+ HIGH => 65535 -+ }, -+ { -+ NAME => "max_packet_count", -+ DEFAULT => 511, -+ ENUM => [], -+ LOW => 15, -+ HIGH => 511 -+ }, -+ { -+ NAME => "host_channels", -+ DEFAULT => 12, -+ ENUM => [], -+ LOW => 1, -+ HIGH => 16 -+ }, -+ { -+ NAME => "dev_endpoints", -+ DEFAULT => 6, -+ ENUM => [], -+ LOW => 1, -+ HIGH => 15 -+ }, -+ { -+ NAME => "phy_type", -+ DEFAULT => 1, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 2 -+ }, -+ { -+ NAME => "phy_utmi_width", -+ DEFAULT => 16, -+ ENUM => [8, 16], -+ LOW => 8, -+ HIGH => 16 -+ }, -+ { -+ NAME => "phy_ulpi_ddr", -+ DEFAULT => 0, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 1 -+ }, -+ ]; -+ -+ -+# -+# -+sub check_arch { -+ $_ = `uname -m`; -+ chomp; -+ unless (m/armv4tl/) { -+ warn "# \n# Can't execute on $_. Run on integrator platform.\n# \n"; -+ return 0; -+ } -+ return 1; -+} -+ -+# -+# -+sub load_module { -+ my $params = shift; -+ print "\nRemoving Module\n"; -+ system "rmmod dwc_otg"; -+ print "Loading Module\n"; -+ if ($params ne "") { -+ print "Module Parameters: $params\n"; -+ } -+ if (system("modprobe dwc_otg $params")) { -+ warn "Unable to load module\n"; -+ return 0; -+ } -+ return 1; -+} -+ -+# -+# -+sub test_status { -+ my $arg = shift; -+ -+ print "\n"; -+ -+ if (defined $arg) { -+ warn "WARNING: $arg\n"; -+ } -+ -+ if ($errors > 0) { -+ warn "TEST FAILED with $errors errors\n"; -+ return 0; -+ } else { -+ print "TEST PASSED\n"; -+ return 0 if (defined $arg); -+ } -+ return 1; -+} -+ -+# -+# -+@EXPORT = qw( -+$sysfsdir -+$paramdir -+$params -+$errors -+check_arch -+load_module -+test_status -+); -+ -+1; ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/test/test_mod_param.pl -@@ -0,0 +1,133 @@ -+#!/usr/bin/perl -w -+# -+# Run this program on the integrator. -+# -+# - Tests module parameter default values. -+# - Tests setting of valid module parameter values via modprobe. -+# - Tests invalid module parameter values. -+# ----------------------------------------------------------------------------- -+use strict; -+use dwc_otg_test; -+ -+check_arch() or die; -+ -+# -+# -+sub test { -+ my ($param,$expected) = @_; -+ my $value = get($param); -+ -+ if ($value == $expected) { -+ print "$param = $value, okay\n"; -+ } -+ -+ else { -+ warn "ERROR: value of $param != $expected, $value\n"; -+ $errors ++; -+ } -+} -+ -+# -+# -+sub get { -+ my $param = shift; -+ my $tmp = `cat $paramdir/$param`; -+ chomp $tmp; -+ return $tmp; -+} -+ -+# -+# -+sub test_main { -+ -+ print "\nTesting Module Parameters\n"; -+ -+ load_module("") or die; -+ -+ # Test initial values -+ print "\nTesting Default Values\n"; -+ foreach (@{$params}) { -+ test ($_->{NAME}, $_->{DEFAULT}); -+ } -+ -+ # Test low value -+ print "\nTesting Low Value\n"; -+ my $cmd_params = ""; -+ foreach (@{$params}) { -+ $cmd_params = $cmd_params . "$_->{NAME}=$_->{LOW} "; -+ } -+ load_module($cmd_params) or die; -+ -+ foreach (@{$params}) { -+ test ($_->{NAME}, $_->{LOW}); -+ } -+ -+ # Test high value -+ print "\nTesting High Value\n"; -+ $cmd_params = ""; -+ foreach (@{$params}) { -+ $cmd_params = $cmd_params . "$_->{NAME}=$_->{HIGH} "; -+ } -+ load_module($cmd_params) or die; -+ -+ foreach (@{$params}) { -+ test ($_->{NAME}, $_->{HIGH}); -+ } -+ -+ # Test Enum -+ print "\nTesting Enumerated\n"; -+ foreach (@{$params}) { -+ if (defined $_->{ENUM}) { -+ my $value; -+ foreach $value (@{$_->{ENUM}}) { -+ $cmd_params = "$_->{NAME}=$value"; -+ load_module($cmd_params) or die; -+ test ($_->{NAME}, $value); -+ } -+ } -+ } -+ -+ # Test Invalid Values -+ print "\nTesting Invalid Values\n"; -+ $cmd_params = ""; -+ foreach (@{$params}) { -+ $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{LOW}-1; -+ } -+ load_module($cmd_params) or die; -+ -+ foreach (@{$params}) { -+ test ($_->{NAME}, $_->{DEFAULT}); -+ } -+ -+ $cmd_params = ""; -+ foreach (@{$params}) { -+ $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{HIGH}+1; -+ } -+ load_module($cmd_params) or die; -+ -+ foreach (@{$params}) { -+ test ($_->{NAME}, $_->{DEFAULT}); -+ } -+ -+ print "\nTesting Enumerated\n"; -+ foreach (@{$params}) { -+ if (defined $_->{ENUM}) { -+ my $value; -+ foreach $value (@{$_->{ENUM}}) { -+ $value = $value + 1; -+ $cmd_params = "$_->{NAME}=$value"; -+ load_module($cmd_params) or die; -+ test ($_->{NAME}, $_->{DEFAULT}); -+ $value = $value - 2; -+ $cmd_params = "$_->{NAME}=$value"; -+ load_module($cmd_params) or die; -+ test ($_->{NAME}, $_->{DEFAULT}); -+ } -+ } -+ } -+ -+ test_status() or die; -+} -+ -+test_main(); -+0; ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/test/test_sysfs.pl -@@ -0,0 +1,193 @@ -+#!/usr/bin/perl -w -+# -+# Run this program on the integrator -+# - Tests select sysfs attributes. -+# - Todo ... test more attributes, hnp/srp, buspower/bussuspend, etc. -+# ----------------------------------------------------------------------------- -+use strict; -+use dwc_otg_test; -+ -+check_arch() or die; -+ -+# -+# -+sub test { -+ my ($attr,$expected) = @_; -+ my $string = get($attr); -+ -+ if ($string eq $expected) { -+ printf("$attr = $string, okay\n"); -+ } -+ else { -+ warn "ERROR: value of $attr != $expected, $string\n"; -+ $errors ++; -+ } -+} -+ -+# -+# -+sub set { -+ my ($reg, $value) = @_; -+ system "echo $value > $sysfsdir/$reg"; -+} -+ -+# -+# -+sub get { -+ my $attr = shift; -+ my $string = `cat $sysfsdir/$attr`; -+ chomp $string; -+ if ($string =~ m/\s\=\s/) { -+ my $tmp; -+ ($tmp, $string) = split /\s=\s/, $string; -+ } -+ return $string; -+} -+ -+# -+# -+sub test_main { -+ print("\nTesting Sysfs Attributes\n"); -+ -+ load_module("") or die; -+ -+ # Test initial values of regoffset/regvalue/guid/gsnpsid -+ print("\nTesting Default Values\n"); -+ -+ test("regoffset", "0xffffffff"); -+ test("regvalue", "invalid offset"); -+ test("guid", "0x12345678"); # this will fail if it has been changed -+ test("gsnpsid", "0x4f54200a"); -+ -+ # Test operation of regoffset/regvalue -+ print("\nTesting regoffset\n"); -+ set('regoffset', '5a5a5a5a'); -+ test("regoffset", "0xffffffff"); -+ -+ set('regoffset', '0'); -+ test("regoffset", "0x00000000"); -+ -+ set('regoffset', '40000'); -+ test("regoffset", "0x00000000"); -+ -+ set('regoffset', '3ffff'); -+ test("regoffset", "0x0003ffff"); -+ -+ set('regoffset', '1'); -+ test("regoffset", "0x00000001"); -+ -+ print("\nTesting regvalue\n"); -+ set('regoffset', '3c'); -+ test("regvalue", "0x12345678"); -+ set('regvalue', '5a5a5a5a'); -+ test("regvalue", "0x5a5a5a5a"); -+ set('regvalue','a5a5a5a5'); -+ test("regvalue", "0xa5a5a5a5"); -+ set('guid','12345678'); -+ -+ # Test HNP Capable -+ print("\nTesting HNP Capable bit\n"); -+ set('hnpcapable', '1'); -+ test("hnpcapable", "0x1"); -+ set('hnpcapable','0'); -+ test("hnpcapable", "0x0"); -+ -+ set('regoffset','0c'); -+ -+ my $old = get('gusbcfg'); -+ print("setting hnpcapable\n"); -+ set('hnpcapable', '1'); -+ test("hnpcapable", "0x1"); -+ test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<9))); -+ test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<9))); -+ -+ $old = get('gusbcfg'); -+ print("clearing hnpcapable\n"); -+ set('hnpcapable', '0'); -+ test("hnpcapable", "0x0"); -+ test ('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<9))); -+ test ('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<9))); -+ -+ # Test SRP Capable -+ print("\nTesting SRP Capable bit\n"); -+ set('srpcapable', '1'); -+ test("srpcapable", "0x1"); -+ set('srpcapable','0'); -+ test("srpcapable", "0x0"); -+ -+ set('regoffset','0c'); -+ -+ $old = get('gusbcfg'); -+ print("setting srpcapable\n"); -+ set('srpcapable', '1'); -+ test("srpcapable", "0x1"); -+ test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<8))); -+ test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<8))); -+ -+ $old = get('gusbcfg'); -+ print("clearing srpcapable\n"); -+ set('srpcapable', '0'); -+ test("srpcapable", "0x0"); -+ test('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<8))); -+ test('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<8))); -+ -+ # Test GGPIO -+ print("\nTesting GGPIO\n"); -+ set('ggpio','5a5a5a5a'); -+ test('ggpio','0x5a5a0000'); -+ set('ggpio','a5a5a5a5'); -+ test('ggpio','0xa5a50000'); -+ set('ggpio','11110000'); -+ test('ggpio','0x11110000'); -+ set('ggpio','00001111'); -+ test('ggpio','0x00000000'); -+ -+ # Test DEVSPEED -+ print("\nTesting DEVSPEED\n"); -+ set('regoffset','800'); -+ $old = get('regvalue'); -+ set('devspeed','0'); -+ test('devspeed','0x0'); -+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3))); -+ set('devspeed','1'); -+ test('devspeed','0x1'); -+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1)); -+ set('devspeed','2'); -+ test('devspeed','0x2'); -+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 2)); -+ set('devspeed','3'); -+ test('devspeed','0x3'); -+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 3)); -+ set('devspeed','4'); -+ test('devspeed','0x0'); -+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3))); -+ set('devspeed','5'); -+ test('devspeed','0x1'); -+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1)); -+ -+ -+ # mode Returns the current mode:0 for device mode1 for host mode Read -+ # hnp Initiate the Host Negotiation Protocol. Read returns the status. Read/Write -+ # srp Initiate the Session Request Protocol. Read returns the status. Read/Write -+ # buspower Get or Set the Power State of the bus (0 - Off or 1 - On) Read/Write -+ # bussuspend Suspend the USB bus. Read/Write -+ # busconnected Get the connection status of the bus Read -+ -+ # gotgctl Get or set the Core Control Status Register. Read/Write -+ ## gusbcfg Get or set the Core USB Configuration Register Read/Write -+ # grxfsiz Get or set the Receive FIFO Size Register Read/Write -+ # gnptxfsiz Get or set the non-periodic Transmit Size Register Read/Write -+ # gpvndctl Get or set the PHY Vendor Control Register Read/Write -+ ## ggpio Get the value in the lower 16-bits of the General Purpose IO Register or Set the upper 16 bits. Read/Write -+ ## guid Get or set the value of the User ID Register Read/Write -+ ## gsnpsid Get the value of the Synopsys ID Regester Read -+ ## devspeed Get or set the device speed setting in the DCFG register Read/Write -+ # enumspeed Gets the device enumeration Speed. Read -+ # hptxfsiz Get the value of the Host Periodic Transmit FIFO Read -+ # hprt0 Get or Set the value in the Host Port Control and Status Register Read/Write -+ -+ test_status("TEST NYI") or die; -+} -+ -+test_main(); -+0; diff --git a/target/linux/brcm2708/patches-4.9/0032-bcm2708-framebuffer-driver.patch b/target/linux/brcm2708/patches-4.9/0032-bcm2708-framebuffer-driver.patch deleted file mode 100644 index b7c05c1611bd..000000000000 --- a/target/linux/brcm2708/patches-4.9/0032-bcm2708-framebuffer-driver.patch +++ /dev/null @@ -1,3452 +0,0 @@ -From cca69d888eb770c496cca83d37accb62a22e84c7 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Wed, 17 Jun 2015 17:06:34 +0100 -Subject: [PATCH] bcm2708 framebuffer driver -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: popcornmix - -bcm2708_fb : Implement blanking support using the mailbox property interface - -bcm2708_fb: Add pan and vsync controls - -bcm2708_fb: DMA acceleration for fb_copyarea - -Based on http://www.raspberrypi.org/phpBB3/viewtopic.php?p=62425#p62425 -Also used Simon's dmaer_master module as a reference for tweaking DMA -settings for better performance. - -For now busylooping only. IRQ support might be added later. -With non-overclocked Raspberry Pi, the performance is ~360 MB/s -for simple copy or ~260 MB/s for two-pass copy (used when dragging -windows to the right). - -In the case of using DMA channel 0, the performance improves -to ~440 MB/s. - -For comparison, VFP optimized CPU copy can only do ~114 MB/s in -the same conditions (hindered by reading uncached source buffer). - -Signed-off-by: Siarhei Siamashka - -bcm2708_fb: report number of dma copies - -Add a counter (exported via debugfs) reporting the -number of dma copies that the framebuffer driver -has done, in order to help evaluate different -optimization strategies. - -Signed-off-by: Luke Diamand - -bcm2708_fb: use IRQ for DMA copies - -The copyarea ioctl() uses DMA to speed things along. This -was busy-waiting for completion. This change supports using -an interrupt instead for larger transfers. For small -transfers, busy-waiting is still likely to be faster. - -Signed-off-by: Luke Diamand - -bcm2708: Make ioctl logging quieter - -video: fbdev: bcm2708_fb: Don't panic on error - -No need to panic the kernel if the video driver fails. -Just print a message and return an error. - -Signed-off-by: Noralf Trønnes - -fbdev: bcm2708_fb: Add ARCH_BCM2835 support - -Add Device Tree support. -Pass the device to dma_alloc_coherent() in order to get the -correct bus address on ARCH_BCM2835. -Use the new DMA legacy API header file. -Including is not necessary. - -Signed-off-by: Noralf Trønnes - -BCM270x_DT: Add bcm2708-fb device - -Add bcm2708-fb to Device Tree and don't add the -platform device when booting in DT mode. - -Signed-off-by: Noralf Trønnes ---- - drivers/video/fbdev/Kconfig | 14 + - drivers/video/fbdev/Makefile | 1 + - drivers/video/fbdev/bcm2708_fb.c | 844 ++++++++++ - drivers/video/logo/logo_linux_clut224.ppm | 2483 ++++++++++------------------- - 4 files changed, 1740 insertions(+), 1602 deletions(-) - create mode 100644 drivers/video/fbdev/bcm2708_fb.c - ---- a/drivers/video/fbdev/Kconfig -+++ b/drivers/video/fbdev/Kconfig -@@ -228,6 +228,20 @@ config FB_TILEBLITTING - comment "Frame buffer hardware drivers" - depends on FB - -+config FB_BCM2708 -+ tristate "BCM2708 framebuffer support" -+ depends on FB && RASPBERRYPI_FIRMWARE -+ select FB_CFB_FILLRECT -+ select FB_CFB_COPYAREA -+ select FB_CFB_IMAGEBLIT -+ help -+ This framebuffer device driver is for the BCM2708 framebuffer. -+ -+ If you want to compile this as a module (=code which can be -+ inserted into and removed from the running kernel), say M -+ here and read . The module -+ will be called bcm2708_fb. -+ - config FB_GRVGA - tristate "Aeroflex Gaisler framebuffer support" - depends on FB && SPARC ---- a/drivers/video/fbdev/Makefile -+++ b/drivers/video/fbdev/Makefile -@@ -10,6 +10,7 @@ obj-$(CONFIG_FB_MACMODES) += macmod - obj-$(CONFIG_FB_WMT_GE_ROPS) += wmt_ge_rops.o - - # Hardware specific drivers go first -+obj-$(CONFIG_FB_BCM2708) += bcm2708_fb.o - obj-$(CONFIG_FB_AMIGA) += amifb.o c2p_planar.o - obj-$(CONFIG_FB_ARC) += arcfb.o - obj-$(CONFIG_FB_CLPS711X) += clps711x-fb.o ---- /dev/null -+++ b/drivers/video/fbdev/bcm2708_fb.c -@@ -0,0 +1,844 @@ -+/* -+ * linux/drivers/video/bcm2708_fb.c -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive -+ * for more details. -+ * -+ * Broadcom simple framebuffer driver -+ * -+ * This file is derived from cirrusfb.c -+ * Copyright 1999-2001 Jeff Garzik -+ * -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+//#define BCM2708_FB_DEBUG -+#define MODULE_NAME "bcm2708_fb" -+ -+#ifdef BCM2708_FB_DEBUG -+#define print_debug(fmt,...) pr_debug("%s:%s:%d: "fmt, MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__) -+#else -+#define print_debug(fmt,...) -+#endif -+ -+/* This is limited to 16 characters when displayed by X startup */ -+static const char *bcm2708_name = "BCM2708 FB"; -+ -+#define DRIVER_NAME "bcm2708_fb" -+ -+static int fbwidth = 800; /* module parameter */ -+static int fbheight = 480; /* module parameter */ -+static int fbdepth = 32; /* module parameter */ -+static int fbswap = 0; /* module parameter */ -+ -+static u32 dma_busy_wait_threshold = 1<<15; -+module_param(dma_busy_wait_threshold, int, 0644); -+MODULE_PARM_DESC(dma_busy_wait_threshold, "Busy-wait for DMA completion below this area"); -+ -+struct fb_alloc_tags { -+ struct rpi_firmware_property_tag_header tag1; -+ u32 xres, yres; -+ struct rpi_firmware_property_tag_header tag2; -+ u32 xres_virtual, yres_virtual; -+ struct rpi_firmware_property_tag_header tag3; -+ u32 bpp; -+ struct rpi_firmware_property_tag_header tag4; -+ u32 xoffset, yoffset; -+ struct rpi_firmware_property_tag_header tag5; -+ u32 base, screen_size; -+ struct rpi_firmware_property_tag_header tag6; -+ u32 pitch; -+}; -+ -+struct bcm2708_fb_stats { -+ struct debugfs_regset32 regset; -+ u32 dma_copies; -+ u32 dma_irqs; -+}; -+ -+struct bcm2708_fb { -+ struct fb_info fb; -+ struct platform_device *dev; -+ struct rpi_firmware *fw; -+ u32 cmap[16]; -+ u32 gpu_cmap[256]; -+ int dma_chan; -+ int dma_irq; -+ void __iomem *dma_chan_base; -+ void *cb_base; /* DMA control blocks */ -+ dma_addr_t cb_handle; -+ struct dentry *debugfs_dir; -+ wait_queue_head_t dma_waitq; -+ struct bcm2708_fb_stats stats; -+ unsigned long fb_bus_address; -+}; -+ -+#define to_bcm2708(info) container_of(info, struct bcm2708_fb, fb) -+ -+static void bcm2708_fb_debugfs_deinit(struct bcm2708_fb *fb) -+{ -+ debugfs_remove_recursive(fb->debugfs_dir); -+ fb->debugfs_dir = NULL; -+} -+ -+static int bcm2708_fb_debugfs_init(struct bcm2708_fb *fb) -+{ -+ static struct debugfs_reg32 stats_registers[] = { -+ { -+ "dma_copies", -+ offsetof(struct bcm2708_fb_stats, dma_copies) -+ }, -+ { -+ "dma_irqs", -+ offsetof(struct bcm2708_fb_stats, dma_irqs) -+ }, -+ }; -+ -+ fb->debugfs_dir = debugfs_create_dir(DRIVER_NAME, NULL); -+ if (!fb->debugfs_dir) { -+ pr_warn("%s: could not create debugfs entry\n", -+ __func__); -+ return -EFAULT; -+ } -+ -+ fb->stats.regset.regs = stats_registers; -+ fb->stats.regset.nregs = ARRAY_SIZE(stats_registers); -+ fb->stats.regset.base = &fb->stats; -+ -+ if (!debugfs_create_regset32( -+ "stats", 0444, fb->debugfs_dir, &fb->stats.regset)) { -+ pr_warn("%s: could not create statistics registers\n", -+ __func__); -+ goto fail; -+ } -+ return 0; -+ -+fail: -+ bcm2708_fb_debugfs_deinit(fb); -+ return -EFAULT; -+} -+ -+static int bcm2708_fb_set_bitfields(struct fb_var_screeninfo *var) -+{ -+ int ret = 0; -+ -+ memset(&var->transp, 0, sizeof(var->transp)); -+ -+ var->red.msb_right = 0; -+ var->green.msb_right = 0; -+ var->blue.msb_right = 0; -+ -+ switch (var->bits_per_pixel) { -+ case 1: -+ case 2: -+ case 4: -+ case 8: -+ var->red.length = var->bits_per_pixel; -+ var->red.offset = 0; -+ var->green.length = var->bits_per_pixel; -+ var->green.offset = 0; -+ var->blue.length = var->bits_per_pixel; -+ var->blue.offset = 0; -+ break; -+ case 16: -+ var->red.length = 5; -+ var->blue.length = 5; -+ /* -+ * Green length can be 5 or 6 depending whether -+ * we're operating in RGB555 or RGB565 mode. -+ */ -+ if (var->green.length != 5 && var->green.length != 6) -+ var->green.length = 6; -+ break; -+ case 24: -+ var->red.length = 8; -+ var->blue.length = 8; -+ var->green.length = 8; -+ break; -+ case 32: -+ var->red.length = 8; -+ var->green.length = 8; -+ var->blue.length = 8; -+ var->transp.length = 8; -+ break; -+ default: -+ ret = -EINVAL; -+ break; -+ } -+ -+ /* -+ * >= 16bpp displays have separate colour component bitfields -+ * encoded in the pixel data. Calculate their position from -+ * the bitfield length defined above. -+ */ -+ if (ret == 0 && var->bits_per_pixel >= 24 && fbswap) { -+ var->blue.offset = 0; -+ var->green.offset = var->blue.offset + var->blue.length; -+ var->red.offset = var->green.offset + var->green.length; -+ var->transp.offset = var->red.offset + var->red.length; -+ } else if (ret == 0 && var->bits_per_pixel >= 24) { -+ var->red.offset = 0; -+ var->green.offset = var->red.offset + var->red.length; -+ var->blue.offset = var->green.offset + var->green.length; -+ var->transp.offset = var->blue.offset + var->blue.length; -+ } else if (ret == 0 && var->bits_per_pixel >= 16) { -+ var->blue.offset = 0; -+ var->green.offset = var->blue.offset + var->blue.length; -+ var->red.offset = var->green.offset + var->green.length; -+ var->transp.offset = var->red.offset + var->red.length; -+ } -+ -+ return ret; -+} -+ -+static int bcm2708_fb_check_var(struct fb_var_screeninfo *var, -+ struct fb_info *info) -+{ -+ /* info input, var output */ -+ print_debug("bcm2708_fb_check_var info(%p) %dx%d (%dx%d), %d, %d\n", info, -+ info->var.xres, info->var.yres, info->var.xres_virtual, -+ info->var.yres_virtual, (int)info->screen_size, -+ info->var.bits_per_pixel); -+ print_debug("bcm2708_fb_check_var var(%p) %dx%d (%dx%d), %d\n", var, -+ var->xres, var->yres, var->xres_virtual, var->yres_virtual, -+ var->bits_per_pixel); -+ -+ if (!var->bits_per_pixel) -+ var->bits_per_pixel = 16; -+ -+ if (bcm2708_fb_set_bitfields(var) != 0) { -+ pr_err("bcm2708_fb_check_var: invalid bits_per_pixel %d\n", -+ var->bits_per_pixel); -+ return -EINVAL; -+ } -+ -+ -+ if (var->xres_virtual < var->xres) -+ var->xres_virtual = var->xres; -+ /* use highest possible virtual resolution */ -+ if (var->yres_virtual == -1) { -+ var->yres_virtual = 480; -+ -+ pr_err -+ ("bcm2708_fb_check_var: virtual resolution set to maximum of %dx%d\n", -+ var->xres_virtual, var->yres_virtual); -+ } -+ if (var->yres_virtual < var->yres) -+ var->yres_virtual = var->yres; -+ -+ if (var->xoffset < 0) -+ var->xoffset = 0; -+ if (var->yoffset < 0) -+ var->yoffset = 0; -+ -+ /* truncate xoffset and yoffset to maximum if too high */ -+ if (var->xoffset > var->xres_virtual - var->xres) -+ var->xoffset = var->xres_virtual - var->xres - 1; -+ if (var->yoffset > var->yres_virtual - var->yres) -+ var->yoffset = var->yres_virtual - var->yres - 1; -+ -+ return 0; -+} -+ -+static int bcm2708_fb_set_par(struct fb_info *info) -+{ -+ struct bcm2708_fb *fb = to_bcm2708(info); -+ struct fb_alloc_tags fbinfo = { -+ .tag1 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT, -+ 8, 0, }, -+ .xres = info->var.xres, -+ .yres = info->var.yres, -+ .tag2 = { RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT, -+ 8, 0, }, -+ .xres_virtual = info->var.xres_virtual, -+ .yres_virtual = info->var.yres_virtual, -+ .tag3 = { RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH, 4, 0 }, -+ .bpp = info->var.bits_per_pixel, -+ .tag4 = { RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET, 8, 0 }, -+ .xoffset = info->var.xoffset, -+ .yoffset = info->var.yoffset, -+ .tag5 = { RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE, 8, 0 }, -+ .base = 0, -+ .screen_size = 0, -+ .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH, 4, 0 }, -+ .pitch = 0, -+ }; -+ int ret; -+ -+ print_debug("bcm2708_fb_set_par info(%p) %dx%d (%dx%d), %d, %d\n", info, -+ info->var.xres, info->var.yres, info->var.xres_virtual, -+ info->var.yres_virtual, (int)info->screen_size, -+ info->var.bits_per_pixel); -+ -+ ret = rpi_firmware_property_list(fb->fw, &fbinfo, sizeof(fbinfo)); -+ if (ret) { -+ dev_err(info->device, -+ "Failed to allocate GPU framebuffer (%d)\n", ret); -+ return ret; -+ } -+ -+ if (info->var.bits_per_pixel <= 8) -+ fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; -+ else -+ fb->fb.fix.visual = FB_VISUAL_TRUECOLOR; -+ -+ fb->fb.fix.line_length = fbinfo.pitch; -+ fbinfo.base |= 0x40000000; -+ fb->fb_bus_address = fbinfo.base; -+ fbinfo.base &= ~0xc0000000; -+ fb->fb.fix.smem_start = fbinfo.base; -+ fb->fb.fix.smem_len = fbinfo.pitch * fbinfo.yres_virtual; -+ fb->fb.screen_size = fbinfo.screen_size; -+ if (fb->fb.screen_base) -+ iounmap(fb->fb.screen_base); -+ fb->fb.screen_base = ioremap_wc(fbinfo.base, fb->fb.screen_size); -+ if (!fb->fb.screen_base) { -+ /* the console may currently be locked */ -+ console_trylock(); -+ console_unlock(); -+ dev_err(info->device, "Failed to set screen_base\n"); -+ return -ENOMEM; -+ } -+ -+ print_debug -+ ("BCM2708FB: start = %p,%p width=%d, height=%d, bpp=%d, pitch=%d size=%d\n", -+ (void *)fb->fb.screen_base, (void *)fb->fb_bus_address, -+ fbinfo.xres, fbinfo.yres, fbinfo.bpp, -+ fbinfo.pitch, (int)fb->fb.screen_size); -+ -+ return 0; -+} -+ -+static inline u32 convert_bitfield(int val, struct fb_bitfield *bf) -+{ -+ unsigned int mask = (1 << bf->length) - 1; -+ -+ return (val >> (16 - bf->length) & mask) << bf->offset; -+} -+ -+ -+static int bcm2708_fb_setcolreg(unsigned int regno, unsigned int red, -+ unsigned int green, unsigned int blue, -+ unsigned int transp, struct fb_info *info) -+{ -+ struct bcm2708_fb *fb = to_bcm2708(info); -+ -+ /*print_debug("BCM2708FB: setcolreg %d:(%02x,%02x,%02x,%02x) %x\n", regno, red, green, blue, transp, fb->fb.fix.visual);*/ -+ if (fb->fb.var.bits_per_pixel <= 8) { -+ if (regno < 256) { -+ /* blue [23:16], green [15:8], red [7:0] */ -+ fb->gpu_cmap[regno] = ((red >> 8) & 0xff) << 0 | -+ ((green >> 8) & 0xff) << 8 | -+ ((blue >> 8) & 0xff) << 16; -+ } -+ /* Hack: we need to tell GPU the palette has changed, but currently bcm2708_fb_set_par takes noticable time when called for every (256) colour */ -+ /* So just call it for what looks like the last colour in a list for now. */ -+ if (regno == 15 || regno == 255) { -+ struct packet { -+ u32 offset; -+ u32 length; -+ u32 cmap[256]; -+ } *packet; -+ int ret; -+ -+ packet = kmalloc(sizeof(*packet), GFP_KERNEL); -+ if (!packet) -+ return -ENOMEM; -+ packet->offset = 0; -+ packet->length = regno + 1; -+ memcpy(packet->cmap, fb->gpu_cmap, sizeof(packet->cmap)); -+ ret = rpi_firmware_property(fb->fw, RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE, -+ packet, (2 + packet->length) * sizeof(u32)); -+ if (ret || packet->offset) -+ dev_err(info->device, "Failed to set palette (%d,%u)\n", -+ ret, packet->offset); -+ kfree(packet); -+ } -+ } else if (regno < 16) { -+ fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) | -+ convert_bitfield(blue, &fb->fb.var.blue) | -+ convert_bitfield(green, &fb->fb.var.green) | -+ convert_bitfield(red, &fb->fb.var.red); -+ } -+ return regno > 255; -+} -+ -+static int bcm2708_fb_blank(int blank_mode, struct fb_info *info) -+{ -+ struct bcm2708_fb *fb = to_bcm2708(info); -+ u32 value; -+ int ret; -+ -+ switch (blank_mode) { -+ case FB_BLANK_UNBLANK: -+ value = 0; -+ break; -+ case FB_BLANK_NORMAL: -+ case FB_BLANK_VSYNC_SUSPEND: -+ case FB_BLANK_HSYNC_SUSPEND: -+ case FB_BLANK_POWERDOWN: -+ value = 1; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ ret = rpi_firmware_property(fb->fw, RPI_FIRMWARE_FRAMEBUFFER_BLANK, -+ &value, sizeof(value)); -+ if (ret) -+ dev_err(info->device, "bcm2708_fb_blank(%d) failed: %d\n", -+ blank_mode, ret); -+ -+ return ret; -+} -+ -+static int bcm2708_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) -+{ -+ s32 result; -+ info->var.xoffset = var->xoffset; -+ info->var.yoffset = var->yoffset; -+ result = bcm2708_fb_set_par(info); -+ if (result != 0) -+ pr_err("bcm2708_fb_pan_display(%d,%d) returns=%d\n", var->xoffset, var->yoffset, result); -+ return result; -+} -+ -+static int bcm2708_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg) -+{ -+ struct bcm2708_fb *fb = to_bcm2708(info); -+ u32 dummy = 0; -+ int ret; -+ -+ switch (cmd) { -+ case FBIO_WAITFORVSYNC: -+ ret = rpi_firmware_property(fb->fw, -+ RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC, -+ &dummy, sizeof(dummy)); -+ break; -+ default: -+ dev_dbg(info->device, "Unknown ioctl 0x%x\n", cmd); -+ return -ENOTTY; -+ } -+ -+ if (ret) -+ dev_err(info->device, "ioctl 0x%x failed (%d)\n", cmd, ret); -+ -+ return ret; -+} -+static void bcm2708_fb_fillrect(struct fb_info *info, -+ const struct fb_fillrect *rect) -+{ -+ /* (is called) print_debug("bcm2708_fb_fillrect\n"); */ -+ cfb_fillrect(info, rect); -+} -+ -+/* A helper function for configuring dma control block */ -+static void set_dma_cb(struct bcm2708_dma_cb *cb, -+ int burst_size, -+ dma_addr_t dst, -+ int dst_stride, -+ dma_addr_t src, -+ int src_stride, -+ int w, -+ int h) -+{ -+ cb->info = BCM2708_DMA_BURST(burst_size) | BCM2708_DMA_S_WIDTH | -+ BCM2708_DMA_S_INC | BCM2708_DMA_D_WIDTH | -+ BCM2708_DMA_D_INC | BCM2708_DMA_TDMODE; -+ cb->dst = dst; -+ cb->src = src; -+ /* -+ * This is not really obvious from the DMA documentation, -+ * but the top 16 bits must be programmmed to "height -1" -+ * and not "height" in 2D mode. -+ */ -+ cb->length = ((h - 1) << 16) | w; -+ cb->stride = ((dst_stride - w) << 16) | (u16)(src_stride - w); -+ cb->pad[0] = 0; -+ cb->pad[1] = 0; -+} -+ -+static void bcm2708_fb_copyarea(struct fb_info *info, -+ const struct fb_copyarea *region) -+{ -+ struct bcm2708_fb *fb = to_bcm2708(info); -+ struct bcm2708_dma_cb *cb = fb->cb_base; -+ int bytes_per_pixel = (info->var.bits_per_pixel + 7) >> 3; -+ /* Channel 0 supports larger bursts and is a bit faster */ -+ int burst_size = (fb->dma_chan == 0) ? 8 : 2; -+ int pixels = region->width * region->height; -+ -+ /* Fallback to cfb_copyarea() if we don't like something */ -+ if (in_atomic() || -+ bytes_per_pixel > 4 || -+ info->var.xres * info->var.yres > 1920 * 1200 || -+ region->width <= 0 || region->width > info->var.xres || -+ region->height <= 0 || region->height > info->var.yres || -+ region->sx < 0 || region->sx >= info->var.xres || -+ region->sy < 0 || region->sy >= info->var.yres || -+ region->dx < 0 || region->dx >= info->var.xres || -+ region->dy < 0 || region->dy >= info->var.yres || -+ region->sx + region->width > info->var.xres || -+ region->dx + region->width > info->var.xres || -+ region->sy + region->height > info->var.yres || -+ region->dy + region->height > info->var.yres) { -+ cfb_copyarea(info, region); -+ return; -+ } -+ -+ if (region->dy == region->sy && region->dx > region->sx) { -+ /* -+ * A difficult case of overlapped copy. Because DMA can't -+ * copy individual scanlines in backwards direction, we need -+ * two-pass processing. We do it by programming a chain of dma -+ * control blocks in the first 16K part of the buffer and use -+ * the remaining 48K as the intermediate temporary scratch -+ * buffer. The buffer size is sufficient to handle up to -+ * 1920x1200 resolution at 32bpp pixel depth. -+ */ -+ int y; -+ dma_addr_t control_block_pa = fb->cb_handle; -+ dma_addr_t scratchbuf = fb->cb_handle + 16 * 1024; -+ int scanline_size = bytes_per_pixel * region->width; -+ int scanlines_per_cb = (64 * 1024 - 16 * 1024) / scanline_size; -+ -+ for (y = 0; y < region->height; y += scanlines_per_cb) { -+ dma_addr_t src = -+ fb->fb_bus_address + -+ bytes_per_pixel * region->sx + -+ (region->sy + y) * fb->fb.fix.line_length; -+ dma_addr_t dst = -+ fb->fb_bus_address + -+ bytes_per_pixel * region->dx + -+ (region->dy + y) * fb->fb.fix.line_length; -+ -+ if (region->height - y < scanlines_per_cb) -+ scanlines_per_cb = region->height - y; -+ -+ set_dma_cb(cb, burst_size, scratchbuf, scanline_size, -+ src, fb->fb.fix.line_length, -+ scanline_size, scanlines_per_cb); -+ control_block_pa += sizeof(struct bcm2708_dma_cb); -+ cb->next = control_block_pa; -+ cb++; -+ -+ set_dma_cb(cb, burst_size, dst, fb->fb.fix.line_length, -+ scratchbuf, scanline_size, -+ scanline_size, scanlines_per_cb); -+ control_block_pa += sizeof(struct bcm2708_dma_cb); -+ cb->next = control_block_pa; -+ cb++; -+ } -+ /* move the pointer back to the last dma control block */ -+ cb--; -+ } else { -+ /* A single dma control block is enough. */ -+ int sy, dy, stride; -+ if (region->dy <= region->sy) { -+ /* processing from top to bottom */ -+ dy = region->dy; -+ sy = region->sy; -+ stride = fb->fb.fix.line_length; -+ } else { -+ /* processing from bottom to top */ -+ dy = region->dy + region->height - 1; -+ sy = region->sy + region->height - 1; -+ stride = -fb->fb.fix.line_length; -+ } -+ set_dma_cb(cb, burst_size, -+ fb->fb_bus_address + dy * fb->fb.fix.line_length + -+ bytes_per_pixel * region->dx, -+ stride, -+ fb->fb_bus_address + sy * fb->fb.fix.line_length + -+ bytes_per_pixel * region->sx, -+ stride, -+ region->width * bytes_per_pixel, -+ region->height); -+ } -+ -+ /* end of dma control blocks chain */ -+ cb->next = 0; -+ -+ -+ if (pixels < dma_busy_wait_threshold) { -+ bcm_dma_start(fb->dma_chan_base, fb->cb_handle); -+ bcm_dma_wait_idle(fb->dma_chan_base); -+ } else { -+ void __iomem *dma_chan = fb->dma_chan_base; -+ cb->info |= BCM2708_DMA_INT_EN; -+ bcm_dma_start(fb->dma_chan_base, fb->cb_handle); -+ while (bcm_dma_is_busy(dma_chan)) { -+ wait_event_interruptible( -+ fb->dma_waitq, -+ !bcm_dma_is_busy(dma_chan)); -+ } -+ fb->stats.dma_irqs++; -+ } -+ fb->stats.dma_copies++; -+} -+ -+static void bcm2708_fb_imageblit(struct fb_info *info, -+ const struct fb_image *image) -+{ -+ /* (is called) print_debug("bcm2708_fb_imageblit\n"); */ -+ cfb_imageblit(info, image); -+} -+ -+static irqreturn_t bcm2708_fb_dma_irq(int irq, void *cxt) -+{ -+ struct bcm2708_fb *fb = cxt; -+ -+ /* FIXME: should read status register to check if this is -+ * actually interrupting us or not, in case this interrupt -+ * ever becomes shared amongst several DMA channels -+ * -+ * readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_IRQ; -+ */ -+ -+ /* acknowledge the interrupt */ -+ writel(BCM2708_DMA_INT, fb->dma_chan_base + BCM2708_DMA_CS); -+ -+ wake_up(&fb->dma_waitq); -+ return IRQ_HANDLED; -+} -+ -+static struct fb_ops bcm2708_fb_ops = { -+ .owner = THIS_MODULE, -+ .fb_check_var = bcm2708_fb_check_var, -+ .fb_set_par = bcm2708_fb_set_par, -+ .fb_setcolreg = bcm2708_fb_setcolreg, -+ .fb_blank = bcm2708_fb_blank, -+ .fb_fillrect = bcm2708_fb_fillrect, -+ .fb_copyarea = bcm2708_fb_copyarea, -+ .fb_imageblit = bcm2708_fb_imageblit, -+ .fb_pan_display = bcm2708_fb_pan_display, -+ .fb_ioctl = bcm2708_ioctl, -+}; -+ -+static int bcm2708_fb_register(struct bcm2708_fb *fb) -+{ -+ int ret; -+ -+ fb->fb.fbops = &bcm2708_fb_ops; -+ fb->fb.flags = FBINFO_FLAG_DEFAULT | FBINFO_HWACCEL_COPYAREA; -+ fb->fb.pseudo_palette = fb->cmap; -+ -+ strncpy(fb->fb.fix.id, bcm2708_name, sizeof(fb->fb.fix.id)); -+ fb->fb.fix.type = FB_TYPE_PACKED_PIXELS; -+ fb->fb.fix.type_aux = 0; -+ fb->fb.fix.xpanstep = 1; -+ fb->fb.fix.ypanstep = 1; -+ fb->fb.fix.ywrapstep = 0; -+ fb->fb.fix.accel = FB_ACCEL_NONE; -+ -+ fb->fb.var.xres = fbwidth; -+ fb->fb.var.yres = fbheight; -+ fb->fb.var.xres_virtual = fbwidth; -+ fb->fb.var.yres_virtual = fbheight; -+ fb->fb.var.bits_per_pixel = fbdepth; -+ fb->fb.var.vmode = FB_VMODE_NONINTERLACED; -+ fb->fb.var.activate = FB_ACTIVATE_NOW; -+ fb->fb.var.nonstd = 0; -+ fb->fb.var.height = -1; /* height of picture in mm */ -+ fb->fb.var.width = -1; /* width of picture in mm */ -+ fb->fb.var.accel_flags = 0; -+ -+ fb->fb.monspecs.hfmin = 0; -+ fb->fb.monspecs.hfmax = 100000; -+ fb->fb.monspecs.vfmin = 0; -+ fb->fb.monspecs.vfmax = 400; -+ fb->fb.monspecs.dclkmin = 1000000; -+ fb->fb.monspecs.dclkmax = 100000000; -+ -+ bcm2708_fb_set_bitfields(&fb->fb.var); -+ init_waitqueue_head(&fb->dma_waitq); -+ -+ /* -+ * Allocate colourmap. -+ */ -+ -+ fb_set_var(&fb->fb, &fb->fb.var); -+ ret = bcm2708_fb_set_par(&fb->fb); -+ if (ret) -+ return ret; -+ -+ print_debug("BCM2708FB: registering framebuffer (%dx%d@%d) (%d)\n", fbwidth, -+ fbheight, fbdepth, fbswap); -+ -+ ret = register_framebuffer(&fb->fb); -+ print_debug("BCM2708FB: register framebuffer (%d)\n", ret); -+ if (ret == 0) -+ goto out; -+ -+ print_debug("BCM2708FB: cannot register framebuffer (%d)\n", ret); -+out: -+ return ret; -+} -+ -+static int bcm2708_fb_probe(struct platform_device *dev) -+{ -+ struct device_node *fw_np; -+ struct rpi_firmware *fw; -+ struct bcm2708_fb *fb; -+ int ret; -+ -+ fw_np = of_parse_phandle(dev->dev.of_node, "firmware", 0); -+/* Remove comment when booting without Device Tree is no longer supported -+ if (!fw_np) { -+ dev_err(&dev->dev, "Missing firmware node\n"); -+ return -ENOENT; -+ } -+*/ -+ fw = rpi_firmware_get(fw_np); -+ if (!fw) -+ return -EPROBE_DEFER; -+ -+ fb = kzalloc(sizeof(struct bcm2708_fb), GFP_KERNEL); -+ if (!fb) { -+ dev_err(&dev->dev, -+ "could not allocate new bcm2708_fb struct\n"); -+ ret = -ENOMEM; -+ goto free_region; -+ } -+ -+ fb->fw = fw; -+ bcm2708_fb_debugfs_init(fb); -+ -+ fb->cb_base = dma_alloc_writecombine(&dev->dev, SZ_64K, -+ &fb->cb_handle, GFP_KERNEL); -+ if (!fb->cb_base) { -+ dev_err(&dev->dev, "cannot allocate DMA CBs\n"); -+ ret = -ENOMEM; -+ goto free_fb; -+ } -+ -+ pr_info("BCM2708FB: allocated DMA memory %08x\n", -+ fb->cb_handle); -+ -+ ret = bcm_dma_chan_alloc(BCM_DMA_FEATURE_BULK, -+ &fb->dma_chan_base, &fb->dma_irq); -+ if (ret < 0) { -+ dev_err(&dev->dev, "couldn't allocate a DMA channel\n"); -+ goto free_cb; -+ } -+ fb->dma_chan = ret; -+ -+ ret = request_irq(fb->dma_irq, bcm2708_fb_dma_irq, -+ 0, "bcm2708_fb dma", fb); -+ if (ret) { -+ pr_err("%s: failed to request DMA irq\n", __func__); -+ goto free_dma_chan; -+ } -+ -+ -+ pr_info("BCM2708FB: allocated DMA channel %d @ %p\n", -+ fb->dma_chan, fb->dma_chan_base); -+ -+ fb->dev = dev; -+ fb->fb.device = &dev->dev; -+ -+ ret = bcm2708_fb_register(fb); -+ if (ret == 0) { -+ platform_set_drvdata(dev, fb); -+ goto out; -+ } -+ -+free_dma_chan: -+ bcm_dma_chan_free(fb->dma_chan); -+free_cb: -+ dma_free_writecombine(&dev->dev, SZ_64K, fb->cb_base, fb->cb_handle); -+free_fb: -+ kfree(fb); -+free_region: -+ dev_err(&dev->dev, "probe failed, err %d\n", ret); -+out: -+ return ret; -+} -+ -+static int bcm2708_fb_remove(struct platform_device *dev) -+{ -+ struct bcm2708_fb *fb = platform_get_drvdata(dev); -+ -+ platform_set_drvdata(dev, NULL); -+ -+ if (fb->fb.screen_base) -+ iounmap(fb->fb.screen_base); -+ unregister_framebuffer(&fb->fb); -+ -+ dma_free_writecombine(&dev->dev, SZ_64K, fb->cb_base, fb->cb_handle); -+ bcm_dma_chan_free(fb->dma_chan); -+ -+ bcm2708_fb_debugfs_deinit(fb); -+ -+ free_irq(fb->dma_irq, fb); -+ -+ kfree(fb); -+ -+ return 0; -+} -+ -+static const struct of_device_id bcm2708_fb_of_match_table[] = { -+ { .compatible = "brcm,bcm2708-fb", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, bcm2708_fb_of_match_table); -+ -+static struct platform_driver bcm2708_fb_driver = { -+ .probe = bcm2708_fb_probe, -+ .remove = bcm2708_fb_remove, -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = bcm2708_fb_of_match_table, -+ }, -+}; -+ -+static int __init bcm2708_fb_init(void) -+{ -+ return platform_driver_register(&bcm2708_fb_driver); -+} -+ -+module_init(bcm2708_fb_init); -+ -+static void __exit bcm2708_fb_exit(void) -+{ -+ platform_driver_unregister(&bcm2708_fb_driver); -+} -+ -+module_exit(bcm2708_fb_exit); -+ -+module_param(fbwidth, int, 0644); -+module_param(fbheight, int, 0644); -+module_param(fbdepth, int, 0644); -+module_param(fbswap, int, 0644); -+ -+MODULE_DESCRIPTION("BCM2708 framebuffer driver"); -+MODULE_LICENSE("GPL"); -+ -+MODULE_PARM_DESC(fbwidth, "Width of ARM Framebuffer"); -+MODULE_PARM_DESC(fbheight, "Height of ARM Framebuffer"); -+MODULE_PARM_DESC(fbdepth, "Bit depth of ARM Framebuffer"); -+MODULE_PARM_DESC(fbswap, "Swap order of red and blue in 24 and 32 bit modes"); ---- a/drivers/video/logo/logo_linux_clut224.ppm -+++ b/drivers/video/logo/logo_linux_clut224.ppm -@@ -1,1604 +1,883 @@ - P3 --# Standard 224-color Linux logo --80 80 -+63 80 - 255 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 6 6 6 6 6 6 10 10 10 10 10 10 -- 10 10 10 6 6 6 6 6 6 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 6 6 6 10 10 10 14 14 14 -- 22 22 22 26 26 26 30 30 30 34 34 34 -- 30 30 30 30 30 30 26 26 26 18 18 18 -- 14 14 14 10 10 10 6 6 6 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 1 0 0 1 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 6 6 6 14 14 14 26 26 26 42 42 42 -- 54 54 54 66 66 66 78 78 78 78 78 78 -- 78 78 78 74 74 74 66 66 66 54 54 54 -- 42 42 42 26 26 26 18 18 18 10 10 10 -- 6 6 6 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 1 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 10 10 10 -- 22 22 22 42 42 42 66 66 66 86 86 86 -- 66 66 66 38 38 38 38 38 38 22 22 22 -- 26 26 26 34 34 34 54 54 54 66 66 66 -- 86 86 86 70 70 70 46 46 46 26 26 26 -- 14 14 14 6 6 6 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 1 0 0 1 0 0 1 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 10 10 10 26 26 26 -- 50 50 50 82 82 82 58 58 58 6 6 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 6 6 6 54 54 54 86 86 86 66 66 66 -- 38 38 38 18 18 18 6 6 6 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 6 6 6 22 22 22 50 50 50 -- 78 78 78 34 34 34 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 6 6 6 70 70 70 -- 78 78 78 46 46 46 22 22 22 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 1 0 0 1 0 0 1 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 6 6 6 18 18 18 42 42 42 82 82 82 -- 26 26 26 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 14 14 14 -- 46 46 46 34 34 34 6 6 6 2 2 6 -- 42 42 42 78 78 78 42 42 42 18 18 18 -- 6 6 6 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 1 0 0 0 0 0 1 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 10 10 10 30 30 30 66 66 66 58 58 58 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 26 26 26 -- 86 86 86 101 101 101 46 46 46 10 10 10 -- 2 2 6 58 58 58 70 70 70 34 34 34 -- 10 10 10 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 1 0 0 1 0 0 1 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 14 14 14 42 42 42 86 86 86 10 10 10 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 30 30 30 -- 94 94 94 94 94 94 58 58 58 26 26 26 -- 2 2 6 6 6 6 78 78 78 54 54 54 -- 22 22 22 6 6 6 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 6 6 6 -- 22 22 22 62 62 62 62 62 62 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 26 26 26 -- 54 54 54 38 38 38 18 18 18 10 10 10 -- 2 2 6 2 2 6 34 34 34 82 82 82 -- 38 38 38 14 14 14 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 1 0 0 1 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 6 6 6 -- 30 30 30 78 78 78 30 30 30 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 10 10 10 -- 10 10 10 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 78 78 78 -- 50 50 50 18 18 18 6 6 6 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 1 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 10 10 10 -- 38 38 38 86 86 86 14 14 14 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 54 54 54 -- 66 66 66 26 26 26 6 6 6 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 1 0 0 1 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 14 14 14 -- 42 42 42 82 82 82 2 2 6 2 2 6 -- 2 2 6 6 6 6 10 10 10 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 6 6 6 -- 14 14 14 10 10 10 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 18 18 18 -- 82 82 82 34 34 34 10 10 10 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 1 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 14 14 14 -- 46 46 46 86 86 86 2 2 6 2 2 6 -- 6 6 6 6 6 6 22 22 22 34 34 34 -- 6 6 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 18 18 18 34 34 34 -- 10 10 10 50 50 50 22 22 22 2 2 6 -- 2 2 6 2 2 6 2 2 6 10 10 10 -- 86 86 86 42 42 42 14 14 14 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 1 0 0 1 0 0 1 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 14 14 14 -- 46 46 46 86 86 86 2 2 6 2 2 6 -- 38 38 38 116 116 116 94 94 94 22 22 22 -- 22 22 22 2 2 6 2 2 6 2 2 6 -- 14 14 14 86 86 86 138 138 138 162 162 162 --154 154 154 38 38 38 26 26 26 6 6 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 86 86 86 46 46 46 14 14 14 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 14 14 14 -- 46 46 46 86 86 86 2 2 6 14 14 14 --134 134 134 198 198 198 195 195 195 116 116 116 -- 10 10 10 2 2 6 2 2 6 6 6 6 --101 98 89 187 187 187 210 210 210 218 218 218 --214 214 214 134 134 134 14 14 14 6 6 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 86 86 86 50 50 50 18 18 18 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 1 0 0 0 -- 0 0 1 0 0 1 0 0 1 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 14 14 14 -- 46 46 46 86 86 86 2 2 6 54 54 54 --218 218 218 195 195 195 226 226 226 246 246 246 -- 58 58 58 2 2 6 2 2 6 30 30 30 --210 210 210 253 253 253 174 174 174 123 123 123 --221 221 221 234 234 234 74 74 74 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 70 70 70 58 58 58 22 22 22 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 14 14 14 -- 46 46 46 82 82 82 2 2 6 106 106 106 --170 170 170 26 26 26 86 86 86 226 226 226 --123 123 123 10 10 10 14 14 14 46 46 46 --231 231 231 190 190 190 6 6 6 70 70 70 -- 90 90 90 238 238 238 158 158 158 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 70 70 70 58 58 58 22 22 22 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 1 0 0 0 -- 0 0 1 0 0 1 0 0 1 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 14 14 14 -- 42 42 42 86 86 86 6 6 6 116 116 116 --106 106 106 6 6 6 70 70 70 149 149 149 --128 128 128 18 18 18 38 38 38 54 54 54 --221 221 221 106 106 106 2 2 6 14 14 14 -- 46 46 46 190 190 190 198 198 198 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 74 74 74 62 62 62 22 22 22 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 1 0 0 0 -- 0 0 1 0 0 0 0 0 1 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 14 14 14 -- 42 42 42 94 94 94 14 14 14 101 101 101 --128 128 128 2 2 6 18 18 18 116 116 116 --118 98 46 121 92 8 121 92 8 98 78 10 --162 162 162 106 106 106 2 2 6 2 2 6 -- 2 2 6 195 195 195 195 195 195 6 6 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 74 74 74 62 62 62 22 22 22 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 1 0 0 1 -- 0 0 1 0 0 0 0 0 1 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 10 10 10 -- 38 38 38 90 90 90 14 14 14 58 58 58 --210 210 210 26 26 26 54 38 6 154 114 10 --226 170 11 236 186 11 225 175 15 184 144 12 --215 174 15 175 146 61 37 26 9 2 2 6 -- 70 70 70 246 246 246 138 138 138 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 70 70 70 66 66 66 26 26 26 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 10 10 10 -- 38 38 38 86 86 86 14 14 14 10 10 10 --195 195 195 188 164 115 192 133 9 225 175 15 --239 182 13 234 190 10 232 195 16 232 200 30 --245 207 45 241 208 19 232 195 16 184 144 12 --218 194 134 211 206 186 42 42 42 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 50 50 50 74 74 74 30 30 30 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 10 10 10 -- 34 34 34 86 86 86 14 14 14 2 2 6 --121 87 25 192 133 9 219 162 10 239 182 13 --236 186 11 232 195 16 241 208 19 244 214 54 --246 218 60 246 218 38 246 215 20 241 208 19 --241 208 19 226 184 13 121 87 25 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 50 50 50 82 82 82 34 34 34 10 10 10 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 10 10 10 -- 34 34 34 82 82 82 30 30 30 61 42 6 --180 123 7 206 145 10 230 174 11 239 182 13 --234 190 10 238 202 15 241 208 19 246 218 74 --246 218 38 246 215 20 246 215 20 246 215 20 --226 184 13 215 174 15 184 144 12 6 6 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 26 26 26 94 94 94 42 42 42 14 14 14 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 10 10 10 -- 30 30 30 78 78 78 50 50 50 104 69 6 --192 133 9 216 158 10 236 178 12 236 186 11 --232 195 16 241 208 19 244 214 54 245 215 43 --246 215 20 246 215 20 241 208 19 198 155 10 --200 144 11 216 158 10 156 118 10 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 6 6 6 90 90 90 54 54 54 18 18 18 -- 6 6 6 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 10 10 10 -- 30 30 30 78 78 78 46 46 46 22 22 22 --137 92 6 210 162 10 239 182 13 238 190 10 --238 202 15 241 208 19 246 215 20 246 215 20 --241 208 19 203 166 17 185 133 11 210 150 10 --216 158 10 210 150 10 102 78 10 2 2 6 -- 6 6 6 54 54 54 14 14 14 2 2 6 -- 2 2 6 62 62 62 74 74 74 30 30 30 -- 10 10 10 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 10 10 10 -- 34 34 34 78 78 78 50 50 50 6 6 6 -- 94 70 30 139 102 15 190 146 13 226 184 13 --232 200 30 232 195 16 215 174 15 190 146 13 --168 122 10 192 133 9 210 150 10 213 154 11 --202 150 34 182 157 106 101 98 89 2 2 6 -- 2 2 6 78 78 78 116 116 116 58 58 58 -- 2 2 6 22 22 22 90 90 90 46 46 46 -- 18 18 18 6 6 6 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 10 10 10 -- 38 38 38 86 86 86 50 50 50 6 6 6 --128 128 128 174 154 114 156 107 11 168 122 10 --198 155 10 184 144 12 197 138 11 200 144 11 --206 145 10 206 145 10 197 138 11 188 164 115 --195 195 195 198 198 198 174 174 174 14 14 14 -- 2 2 6 22 22 22 116 116 116 116 116 116 -- 22 22 22 2 2 6 74 74 74 70 70 70 -- 30 30 30 10 10 10 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 6 6 6 18 18 18 -- 50 50 50 101 101 101 26 26 26 10 10 10 --138 138 138 190 190 190 174 154 114 156 107 11 --197 138 11 200 144 11 197 138 11 192 133 9 --180 123 7 190 142 34 190 178 144 187 187 187 --202 202 202 221 221 221 214 214 214 66 66 66 -- 2 2 6 2 2 6 50 50 50 62 62 62 -- 6 6 6 2 2 6 10 10 10 90 90 90 -- 50 50 50 18 18 18 6 6 6 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 10 10 10 34 34 34 -- 74 74 74 74 74 74 2 2 6 6 6 6 --144 144 144 198 198 198 190 190 190 178 166 146 --154 121 60 156 107 11 156 107 11 168 124 44 --174 154 114 187 187 187 190 190 190 210 210 210 --246 246 246 253 253 253 253 253 253 182 182 182 -- 6 6 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 62 62 62 -- 74 74 74 34 34 34 14 14 14 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 10 10 10 22 22 22 54 54 54 -- 94 94 94 18 18 18 2 2 6 46 46 46 --234 234 234 221 221 221 190 190 190 190 190 190 --190 190 190 187 187 187 187 187 187 190 190 190 --190 190 190 195 195 195 214 214 214 242 242 242 --253 253 253 253 253 253 253 253 253 253 253 253 -- 82 82 82 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 14 14 14 -- 86 86 86 54 54 54 22 22 22 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 6 6 6 18 18 18 46 46 46 90 90 90 -- 46 46 46 18 18 18 6 6 6 182 182 182 --253 253 253 246 246 246 206 206 206 190 190 190 --190 190 190 190 190 190 190 190 190 190 190 190 --206 206 206 231 231 231 250 250 250 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --202 202 202 14 14 14 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 42 42 42 86 86 86 42 42 42 18 18 18 -- 6 6 6 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 6 6 6 -- 14 14 14 38 38 38 74 74 74 66 66 66 -- 2 2 6 6 6 6 90 90 90 250 250 250 --253 253 253 253 253 253 238 238 238 198 198 198 --190 190 190 190 190 190 195 195 195 221 221 221 --246 246 246 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 82 82 82 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 78 78 78 70 70 70 34 34 34 -- 14 14 14 6 6 6 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 14 14 14 -- 34 34 34 66 66 66 78 78 78 6 6 6 -- 2 2 6 18 18 18 218 218 218 253 253 253 --253 253 253 253 253 253 253 253 253 246 246 246 --226 226 226 231 231 231 246 246 246 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 178 178 178 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 18 18 18 90 90 90 62 62 62 -- 30 30 30 10 10 10 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 10 10 10 26 26 26 -- 58 58 58 90 90 90 18 18 18 2 2 6 -- 2 2 6 110 110 110 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --250 250 250 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 231 231 231 18 18 18 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 18 18 18 94 94 94 -- 54 54 54 26 26 26 10 10 10 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 6 6 6 22 22 22 50 50 50 -- 90 90 90 26 26 26 2 2 6 2 2 6 -- 14 14 14 195 195 195 250 250 250 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --250 250 250 242 242 242 54 54 54 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 38 38 38 -- 86 86 86 50 50 50 22 22 22 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 6 6 6 14 14 14 38 38 38 82 82 82 -- 34 34 34 2 2 6 2 2 6 2 2 6 -- 42 42 42 195 195 195 246 246 246 253 253 253 --253 253 253 253 253 253 253 253 253 250 250 250 --242 242 242 242 242 242 250 250 250 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 250 250 250 246 246 246 238 238 238 --226 226 226 231 231 231 101 101 101 6 6 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 38 38 38 82 82 82 42 42 42 14 14 14 -- 6 6 6 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 10 10 10 26 26 26 62 62 62 66 66 66 -- 2 2 6 2 2 6 2 2 6 6 6 6 -- 70 70 70 170 170 170 206 206 206 234 234 234 --246 246 246 250 250 250 250 250 250 238 238 238 --226 226 226 231 231 231 238 238 238 250 250 250 --250 250 250 250 250 250 246 246 246 231 231 231 --214 214 214 206 206 206 202 202 202 202 202 202 --198 198 198 202 202 202 182 182 182 18 18 18 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 62 62 62 66 66 66 30 30 30 -- 10 10 10 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 14 14 14 42 42 42 82 82 82 18 18 18 -- 2 2 6 2 2 6 2 2 6 10 10 10 -- 94 94 94 182 182 182 218 218 218 242 242 242 --250 250 250 253 253 253 253 253 253 250 250 250 --234 234 234 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 246 246 246 --238 238 238 226 226 226 210 210 210 202 202 202 --195 195 195 195 195 195 210 210 210 158 158 158 -- 6 6 6 14 14 14 50 50 50 14 14 14 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 6 6 6 86 86 86 46 46 46 -- 18 18 18 6 6 6 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 6 6 6 -- 22 22 22 54 54 54 70 70 70 2 2 6 -- 2 2 6 10 10 10 2 2 6 22 22 22 --166 166 166 231 231 231 250 250 250 253 253 253 --253 253 253 253 253 253 253 253 253 250 250 250 --242 242 242 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 246 246 246 --231 231 231 206 206 206 198 198 198 226 226 226 -- 94 94 94 2 2 6 6 6 6 38 38 38 -- 30 30 30 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 62 62 62 66 66 66 -- 26 26 26 10 10 10 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 10 10 10 -- 30 30 30 74 74 74 50 50 50 2 2 6 -- 26 26 26 26 26 26 2 2 6 106 106 106 --238 238 238 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 246 246 246 218 218 218 202 202 202 --210 210 210 14 14 14 2 2 6 2 2 6 -- 30 30 30 22 22 22 2 2 6 2 2 6 -- 2 2 6 2 2 6 18 18 18 86 86 86 -- 42 42 42 14 14 14 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 14 14 14 -- 42 42 42 90 90 90 22 22 22 2 2 6 -- 42 42 42 2 2 6 18 18 18 218 218 218 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 250 250 250 221 221 221 --218 218 218 101 101 101 2 2 6 14 14 14 -- 18 18 18 38 38 38 10 10 10 2 2 6 -- 2 2 6 2 2 6 2 2 6 78 78 78 -- 58 58 58 22 22 22 6 6 6 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 6 6 6 18 18 18 -- 54 54 54 82 82 82 2 2 6 26 26 26 -- 22 22 22 2 2 6 123 123 123 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 250 250 250 --238 238 238 198 198 198 6 6 6 38 38 38 -- 58 58 58 26 26 26 38 38 38 2 2 6 -- 2 2 6 2 2 6 2 2 6 46 46 46 -- 78 78 78 30 30 30 10 10 10 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 10 10 10 30 30 30 -- 74 74 74 58 58 58 2 2 6 42 42 42 -- 2 2 6 22 22 22 231 231 231 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 250 250 250 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 246 246 246 46 46 46 38 38 38 -- 42 42 42 14 14 14 38 38 38 14 14 14 -- 2 2 6 2 2 6 2 2 6 6 6 6 -- 86 86 86 46 46 46 14 14 14 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 6 6 6 14 14 14 42 42 42 -- 90 90 90 18 18 18 18 18 18 26 26 26 -- 2 2 6 116 116 116 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 250 250 250 238 238 238 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 94 94 94 6 6 6 -- 2 2 6 2 2 6 10 10 10 34 34 34 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 74 74 74 58 58 58 22 22 22 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 10 10 10 26 26 26 66 66 66 -- 82 82 82 2 2 6 38 38 38 6 6 6 -- 14 14 14 210 210 210 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 246 246 246 242 242 242 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 144 144 144 2 2 6 -- 2 2 6 2 2 6 2 2 6 46 46 46 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 42 42 42 74 74 74 30 30 30 10 10 10 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 6 6 6 14 14 14 42 42 42 90 90 90 -- 26 26 26 6 6 6 42 42 42 2 2 6 -- 74 74 74 250 250 250 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 242 242 242 242 242 242 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 182 182 182 2 2 6 -- 2 2 6 2 2 6 2 2 6 46 46 46 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 10 10 10 86 86 86 38 38 38 10 10 10 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 10 10 10 26 26 26 66 66 66 82 82 82 -- 2 2 6 22 22 22 18 18 18 2 2 6 --149 149 149 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 234 234 234 242 242 242 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 206 206 206 2 2 6 -- 2 2 6 2 2 6 2 2 6 38 38 38 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 6 6 6 86 86 86 46 46 46 14 14 14 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 6 6 6 -- 18 18 18 46 46 46 86 86 86 18 18 18 -- 2 2 6 34 34 34 10 10 10 6 6 6 --210 210 210 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 234 234 234 242 242 242 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 221 221 221 6 6 6 -- 2 2 6 2 2 6 6 6 6 30 30 30 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 82 82 82 54 54 54 18 18 18 -- 6 6 6 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 10 10 10 -- 26 26 26 66 66 66 62 62 62 2 2 6 -- 2 2 6 38 38 38 10 10 10 26 26 26 --238 238 238 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 231 231 231 238 238 238 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 231 231 231 6 6 6 -- 2 2 6 2 2 6 10 10 10 30 30 30 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 66 66 66 58 58 58 22 22 22 -- 6 6 6 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 10 10 10 -- 38 38 38 78 78 78 6 6 6 2 2 6 -- 2 2 6 46 46 46 14 14 14 42 42 42 --246 246 246 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 231 231 231 242 242 242 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 234 234 234 10 10 10 -- 2 2 6 2 2 6 22 22 22 14 14 14 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 66 66 66 62 62 62 22 22 22 -- 6 6 6 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 6 6 6 18 18 18 -- 50 50 50 74 74 74 2 2 6 2 2 6 -- 14 14 14 70 70 70 34 34 34 62 62 62 --250 250 250 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 231 231 231 246 246 246 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 234 234 234 14 14 14 -- 2 2 6 2 2 6 30 30 30 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 66 66 66 62 62 62 22 22 22 -- 6 6 6 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 6 6 6 18 18 18 -- 54 54 54 62 62 62 2 2 6 2 2 6 -- 2 2 6 30 30 30 46 46 46 70 70 70 --250 250 250 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 231 231 231 246 246 246 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 226 226 226 10 10 10 -- 2 2 6 6 6 6 30 30 30 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 66 66 66 58 58 58 22 22 22 -- 6 6 6 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 6 6 6 22 22 22 -- 58 58 58 62 62 62 2 2 6 2 2 6 -- 2 2 6 2 2 6 30 30 30 78 78 78 --250 250 250 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 231 231 231 246 246 246 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 206 206 206 2 2 6 -- 22 22 22 34 34 34 18 14 6 22 22 22 -- 26 26 26 18 18 18 6 6 6 2 2 6 -- 2 2 6 82 82 82 54 54 54 18 18 18 -- 6 6 6 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 6 6 6 26 26 26 -- 62 62 62 106 106 106 74 54 14 185 133 11 --210 162 10 121 92 8 6 6 6 62 62 62 --238 238 238 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 231 231 231 246 246 246 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 158 158 158 18 18 18 -- 14 14 14 2 2 6 2 2 6 2 2 6 -- 6 6 6 18 18 18 66 66 66 38 38 38 -- 6 6 6 94 94 94 50 50 50 18 18 18 -- 6 6 6 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 6 6 6 -- 10 10 10 10 10 10 18 18 18 38 38 38 -- 78 78 78 142 134 106 216 158 10 242 186 14 --246 190 14 246 190 14 156 118 10 10 10 10 -- 90 90 90 238 238 238 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 231 231 231 250 250 250 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 246 230 190 --238 204 91 238 204 91 181 142 44 37 26 9 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 38 38 38 46 46 46 -- 26 26 26 106 106 106 54 54 54 18 18 18 -- 6 6 6 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 6 6 6 14 14 14 22 22 22 -- 30 30 30 38 38 38 50 50 50 70 70 70 --106 106 106 190 142 34 226 170 11 242 186 14 --246 190 14 246 190 14 246 190 14 154 114 10 -- 6 6 6 74 74 74 226 226 226 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 231 231 231 250 250 250 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 228 184 62 --241 196 14 241 208 19 232 195 16 38 30 10 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 6 6 6 30 30 30 26 26 26 --203 166 17 154 142 90 66 66 66 26 26 26 -- 6 6 6 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 6 6 6 18 18 18 38 38 38 58 58 58 -- 78 78 78 86 86 86 101 101 101 123 123 123 --175 146 61 210 150 10 234 174 13 246 186 14 --246 190 14 246 190 14 246 190 14 238 190 10 --102 78 10 2 2 6 46 46 46 198 198 198 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 234 234 234 242 242 242 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 224 178 62 --242 186 14 241 196 14 210 166 10 22 18 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 6 6 6 121 92 8 --238 202 15 232 195 16 82 82 82 34 34 34 -- 10 10 10 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 14 14 14 38 38 38 70 70 70 154 122 46 --190 142 34 200 144 11 197 138 11 197 138 11 --213 154 11 226 170 11 242 186 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --225 175 15 46 32 6 2 2 6 22 22 22 --158 158 158 250 250 250 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 250 250 250 242 242 242 224 178 62 --239 182 13 236 186 11 213 154 11 46 32 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 61 42 6 225 175 15 --238 190 10 236 186 11 112 100 78 42 42 42 -- 14 14 14 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 6 6 6 -- 22 22 22 54 54 54 154 122 46 213 154 11 --226 170 11 230 174 11 226 170 11 226 170 11 --236 178 12 242 186 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --241 196 14 184 144 12 10 10 10 2 2 6 -- 6 6 6 116 116 116 242 242 242 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 231 231 231 198 198 198 214 170 54 --236 178 12 236 178 12 210 150 10 137 92 6 -- 18 14 6 2 2 6 2 2 6 2 2 6 -- 6 6 6 70 47 6 200 144 11 236 178 12 --239 182 13 239 182 13 124 112 88 58 58 58 -- 22 22 22 6 6 6 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 10 10 10 -- 30 30 30 70 70 70 180 133 36 226 170 11 --239 182 13 242 186 14 242 186 14 246 186 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 232 195 16 98 70 6 2 2 6 -- 2 2 6 2 2 6 66 66 66 221 221 221 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 206 206 206 198 198 198 214 166 58 --230 174 11 230 174 11 216 158 10 192 133 9 --163 110 8 116 81 8 102 78 10 116 81 8 --167 114 7 197 138 11 226 170 11 239 182 13 --242 186 14 242 186 14 162 146 94 78 78 78 -- 34 34 34 14 14 14 6 6 6 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 6 6 6 -- 30 30 30 78 78 78 190 142 34 226 170 11 --239 182 13 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 241 196 14 203 166 17 22 18 6 -- 2 2 6 2 2 6 2 2 6 38 38 38 --218 218 218 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --250 250 250 206 206 206 198 198 198 202 162 69 --226 170 11 236 178 12 224 166 10 210 150 10 --200 144 11 197 138 11 192 133 9 197 138 11 --210 150 10 226 170 11 242 186 14 246 190 14 --246 190 14 246 186 14 225 175 15 124 112 88 -- 62 62 62 30 30 30 14 14 14 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 10 10 10 -- 30 30 30 78 78 78 174 135 50 224 166 10 --239 182 13 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 241 196 14 139 102 15 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 78 78 78 250 250 250 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --250 250 250 214 214 214 198 198 198 190 150 46 --219 162 10 236 178 12 234 174 13 224 166 10 --216 158 10 213 154 11 213 154 11 216 158 10 --226 170 11 239 182 13 246 190 14 246 190 14 --246 190 14 246 190 14 242 186 14 206 162 42 --101 101 101 58 58 58 30 30 30 14 14 14 -- 6 6 6 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 10 10 10 -- 30 30 30 74 74 74 174 135 50 216 158 10 --236 178 12 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 241 196 14 226 184 13 -- 61 42 6 2 2 6 2 2 6 2 2 6 -- 22 22 22 238 238 238 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 226 226 226 187 187 187 180 133 36 --216 158 10 236 178 12 239 182 13 236 178 12 --230 174 11 226 170 11 226 170 11 230 174 11 --236 178 12 242 186 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 186 14 239 182 13 --206 162 42 106 106 106 66 66 66 34 34 34 -- 14 14 14 6 6 6 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 6 6 6 -- 26 26 26 70 70 70 163 133 67 213 154 11 --236 178 12 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 241 196 14 --190 146 13 18 14 6 2 2 6 2 2 6 -- 46 46 46 246 246 246 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 221 221 221 86 86 86 156 107 11 --216 158 10 236 178 12 242 186 14 246 186 14 --242 186 14 239 182 13 239 182 13 242 186 14 --242 186 14 246 186 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --242 186 14 225 175 15 142 122 72 66 66 66 -- 30 30 30 10 10 10 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 6 6 6 -- 26 26 26 70 70 70 163 133 67 210 150 10 --236 178 12 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --232 195 16 121 92 8 34 34 34 106 106 106 --221 221 221 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --242 242 242 82 82 82 18 14 6 163 110 8 --216 158 10 236 178 12 242 186 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 242 186 14 163 133 67 -- 46 46 46 18 18 18 6 6 6 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 10 10 10 -- 30 30 30 78 78 78 163 133 67 210 150 10 --236 178 12 246 186 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --241 196 14 215 174 15 190 178 144 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 218 218 218 -- 58 58 58 2 2 6 22 18 6 167 114 7 --216 158 10 236 178 12 246 186 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 186 14 242 186 14 190 150 46 -- 54 54 54 22 22 22 6 6 6 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 14 14 14 -- 38 38 38 86 86 86 180 133 36 213 154 11 --236 178 12 246 186 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 232 195 16 190 146 13 214 214 214 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 250 250 250 170 170 170 26 26 26 -- 2 2 6 2 2 6 37 26 9 163 110 8 --219 162 10 239 182 13 246 186 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 186 14 236 178 12 224 166 10 142 122 72 -- 46 46 46 18 18 18 6 6 6 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 6 6 6 18 18 18 -- 50 50 50 109 106 95 192 133 9 224 166 10 --242 186 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --242 186 14 226 184 13 210 162 10 142 110 46 --226 226 226 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --253 253 253 253 253 253 253 253 253 253 253 253 --198 198 198 66 66 66 2 2 6 2 2 6 -- 2 2 6 2 2 6 50 34 6 156 107 11 --219 162 10 239 182 13 246 186 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 242 186 14 --234 174 13 213 154 11 154 122 46 66 66 66 -- 30 30 30 10 10 10 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 6 6 6 22 22 22 -- 58 58 58 154 121 60 206 145 10 234 174 13 --242 186 14 246 186 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 186 14 236 178 12 210 162 10 163 110 8 -- 61 42 6 138 138 138 218 218 218 250 250 250 --253 253 253 253 253 253 253 253 253 250 250 250 --242 242 242 210 210 210 144 144 144 66 66 66 -- 6 6 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 61 42 6 163 110 8 --216 158 10 236 178 12 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 239 182 13 230 174 11 216 158 10 --190 142 34 124 112 88 70 70 70 38 38 38 -- 18 18 18 6 6 6 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 6 6 6 22 22 22 -- 62 62 62 168 124 44 206 145 10 224 166 10 --236 178 12 239 182 13 242 186 14 242 186 14 --246 186 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 236 178 12 216 158 10 175 118 6 -- 80 54 7 2 2 6 6 6 6 30 30 30 -- 54 54 54 62 62 62 50 50 50 38 38 38 -- 14 14 14 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 6 6 6 80 54 7 167 114 7 --213 154 11 236 178 12 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 190 14 242 186 14 239 182 13 239 182 13 --230 174 11 210 150 10 174 135 50 124 112 88 -- 82 82 82 54 54 54 34 34 34 18 18 18 -- 6 6 6 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 6 6 6 18 18 18 -- 50 50 50 158 118 36 192 133 9 200 144 11 --216 158 10 219 162 10 224 166 10 226 170 11 --230 174 11 236 178 12 239 182 13 239 182 13 --242 186 14 246 186 14 246 190 14 246 190 14 --246 190 14 246 190 14 246 190 14 246 190 14 --246 186 14 230 174 11 210 150 10 163 110 8 --104 69 6 10 10 10 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 6 6 6 91 60 6 167 114 7 --206 145 10 230 174 11 242 186 14 246 190 14 --246 190 14 246 190 14 246 186 14 242 186 14 --239 182 13 230 174 11 224 166 10 213 154 11 --180 133 36 124 112 88 86 86 86 58 58 58 -- 38 38 38 22 22 22 10 10 10 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 14 14 14 -- 34 34 34 70 70 70 138 110 50 158 118 36 --167 114 7 180 123 7 192 133 9 197 138 11 --200 144 11 206 145 10 213 154 11 219 162 10 --224 166 10 230 174 11 239 182 13 242 186 14 --246 186 14 246 186 14 246 186 14 246 186 14 --239 182 13 216 158 10 185 133 11 152 99 6 --104 69 6 18 14 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 2 2 6 2 2 6 2 2 6 -- 2 2 6 6 6 6 80 54 7 152 99 6 --192 133 9 219 162 10 236 178 12 239 182 13 --246 186 14 242 186 14 239 182 13 236 178 12 --224 166 10 206 145 10 192 133 9 154 121 60 -- 94 94 94 62 62 62 42 42 42 22 22 22 -- 14 14 14 6 6 6 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 6 6 6 -- 18 18 18 34 34 34 58 58 58 78 78 78 --101 98 89 124 112 88 142 110 46 156 107 11 --163 110 8 167 114 7 175 118 6 180 123 7 --185 133 11 197 138 11 210 150 10 219 162 10 --226 170 11 236 178 12 236 178 12 234 174 13 --219 162 10 197 138 11 163 110 8 130 83 6 -- 91 60 6 10 10 10 2 2 6 2 2 6 -- 18 18 18 38 38 38 38 38 38 38 38 38 -- 38 38 38 38 38 38 38 38 38 38 38 38 -- 38 38 38 38 38 38 26 26 26 2 2 6 -- 2 2 6 6 6 6 70 47 6 137 92 6 --175 118 6 200 144 11 219 162 10 230 174 11 --234 174 13 230 174 11 219 162 10 210 150 10 --192 133 9 163 110 8 124 112 88 82 82 82 -- 50 50 50 30 30 30 14 14 14 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 6 6 6 14 14 14 22 22 22 34 34 34 -- 42 42 42 58 58 58 74 74 74 86 86 86 --101 98 89 122 102 70 130 98 46 121 87 25 --137 92 6 152 99 6 163 110 8 180 123 7 --185 133 11 197 138 11 206 145 10 200 144 11 --180 123 7 156 107 11 130 83 6 104 69 6 -- 50 34 6 54 54 54 110 110 110 101 98 89 -- 86 86 86 82 82 82 78 78 78 78 78 78 -- 78 78 78 78 78 78 78 78 78 78 78 78 -- 78 78 78 82 82 82 86 86 86 94 94 94 --106 106 106 101 101 101 86 66 34 124 80 6 --156 107 11 180 123 7 192 133 9 200 144 11 --206 145 10 200 144 11 192 133 9 175 118 6 --139 102 15 109 106 95 70 70 70 42 42 42 -- 22 22 22 10 10 10 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 6 6 6 10 10 10 -- 14 14 14 22 22 22 30 30 30 38 38 38 -- 50 50 50 62 62 62 74 74 74 90 90 90 --101 98 89 112 100 78 121 87 25 124 80 6 --137 92 6 152 99 6 152 99 6 152 99 6 --138 86 6 124 80 6 98 70 6 86 66 30 --101 98 89 82 82 82 58 58 58 46 46 46 -- 38 38 38 34 34 34 34 34 34 34 34 34 -- 34 34 34 34 34 34 34 34 34 34 34 34 -- 34 34 34 34 34 34 38 38 38 42 42 42 -- 54 54 54 82 82 82 94 86 76 91 60 6 --134 86 6 156 107 11 167 114 7 175 118 6 --175 118 6 167 114 7 152 99 6 121 87 25 --101 98 89 62 62 62 34 34 34 18 18 18 -- 6 6 6 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 6 6 6 6 6 6 10 10 10 -- 18 18 18 22 22 22 30 30 30 42 42 42 -- 50 50 50 66 66 66 86 86 86 101 98 89 --106 86 58 98 70 6 104 69 6 104 69 6 --104 69 6 91 60 6 82 62 34 90 90 90 -- 62 62 62 38 38 38 22 22 22 14 14 14 -- 10 10 10 10 10 10 10 10 10 10 10 10 -- 10 10 10 10 10 10 6 6 6 10 10 10 -- 10 10 10 10 10 10 10 10 10 14 14 14 -- 22 22 22 42 42 42 70 70 70 89 81 66 -- 80 54 7 104 69 6 124 80 6 137 92 6 --134 86 6 116 81 8 100 82 52 86 86 86 -- 58 58 58 30 30 30 14 14 14 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 6 6 6 10 10 10 14 14 14 -- 18 18 18 26 26 26 38 38 38 54 54 54 -- 70 70 70 86 86 86 94 86 76 89 81 66 -- 89 81 66 86 86 86 74 74 74 50 50 50 -- 30 30 30 14 14 14 6 6 6 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 6 6 6 18 18 18 34 34 34 58 58 58 -- 82 82 82 89 81 66 89 81 66 89 81 66 -- 94 86 66 94 86 76 74 74 74 50 50 50 -- 26 26 26 14 14 14 6 6 6 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 6 6 6 6 6 6 14 14 14 18 18 18 -- 30 30 30 38 38 38 46 46 46 54 54 54 -- 50 50 50 42 42 42 30 30 30 18 18 18 -- 10 10 10 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 6 6 6 14 14 14 26 26 26 -- 38 38 38 50 50 50 58 58 58 58 58 58 -- 54 54 54 42 42 42 30 30 30 18 18 18 -- 10 10 10 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 6 6 6 -- 6 6 6 10 10 10 14 14 14 18 18 18 -- 18 18 18 14 14 14 10 10 10 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 6 6 6 -- 14 14 14 18 18 18 22 22 22 22 22 22 -- 18 18 18 14 14 14 10 10 10 6 6 6 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -- 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 1 0 -+0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 -+0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 -+10 15 3 2 3 1 12 18 4 42 61 14 19 27 6 11 16 4 -+38 55 13 10 15 3 3 4 1 10 15 3 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 3 1 -+12 18 4 1 1 0 23 34 8 31 45 11 10 15 3 32 47 11 -+34 49 12 3 4 1 3 4 1 3 4 1 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 10 15 3 29 42 10 26 37 9 12 18 4 -+55 80 19 81 118 28 55 80 19 92 132 31 106 153 36 69 100 23 -+100 144 34 80 116 27 42 61 14 81 118 28 23 34 8 27 40 9 -+15 21 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 1 1 0 29 42 10 15 21 5 50 72 17 -+74 107 25 45 64 15 102 148 35 80 116 27 84 121 28 111 160 38 -+69 100 23 65 94 22 81 118 28 29 42 10 17 25 6 29 42 10 -+23 34 8 2 3 1 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 4 1 -+15 21 5 15 21 5 34 49 12 101 146 34 111 161 38 97 141 33 -+97 141 33 119 172 41 117 170 40 116 167 40 118 170 40 118 171 40 -+117 169 40 118 170 40 111 160 38 118 170 40 96 138 32 89 128 30 -+81 118 28 11 16 4 10 15 3 1 1 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+3 4 1 3 4 1 34 49 12 101 146 34 79 115 27 111 160 38 -+114 165 39 113 163 39 118 170 40 117 169 40 118 171 40 117 169 40 -+116 167 40 119 172 41 113 163 39 92 132 31 105 151 36 113 163 39 -+75 109 26 19 27 6 16 23 5 11 16 4 0 1 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 10 15 3 -+80 116 27 106 153 36 105 151 36 114 165 39 118 170 40 118 171 40 -+118 171 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 170 40 117 169 40 118 170 40 118 170 40 -+117 170 40 75 109 26 75 109 26 34 49 12 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 4 1 -+64 92 22 65 94 22 100 144 34 118 171 40 118 170 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 118 171 41 118 170 40 117 169 40 -+109 158 37 105 151 36 104 150 35 47 69 16 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+42 61 14 115 167 39 118 170 40 117 169 40 117 169 40 117 169 40 -+117 170 40 117 170 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 118 170 40 96 138 32 17 25 6 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 47 69 16 -+114 165 39 117 168 40 117 170 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 118 170 40 117 169 40 117 169 40 117 169 40 -+117 170 40 119 172 41 96 138 32 12 18 4 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 10 15 3 -+32 47 11 105 151 36 118 170 40 117 169 40 117 169 40 116 168 40 -+109 157 37 111 160 38 117 169 40 118 171 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 118 171 40 69 100 23 2 3 1 -+0 0 0 0 0 0 0 0 0 0 0 0 19 27 6 101 146 34 -+118 171 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 170 40 -+118 171 40 115 166 39 107 154 36 111 161 38 117 169 40 117 169 40 -+117 169 40 118 171 40 75 109 26 19 27 6 2 3 1 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 16 23 5 -+89 128 30 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+111 160 38 92 132 31 79 115 27 96 138 32 115 166 39 119 171 41 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 118 170 40 109 157 37 26 37 9 -+0 0 0 0 0 0 0 0 0 0 0 0 64 92 22 118 171 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 118 170 40 118 171 40 109 157 37 -+89 128 30 81 118 28 100 144 34 115 166 39 117 169 40 117 169 40 -+117 169 40 117 170 40 113 163 39 60 86 20 1 1 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+27 40 9 96 138 32 118 170 40 117 169 40 117 169 40 117 169 40 -+117 170 40 117 169 40 101 146 34 67 96 23 55 80 19 84 121 28 -+113 163 39 119 171 41 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 119 171 41 65 94 22 -+0 0 0 0 0 0 0 0 0 15 21 5 101 146 34 118 171 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 118 170 40 118 171 40 104 150 35 69 100 23 53 76 18 -+81 118 28 111 160 38 118 170 40 117 169 40 117 169 40 117 169 40 -+117 169 40 114 165 39 69 100 23 10 15 3 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 -+31 45 11 77 111 26 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 118 170 40 116 168 40 92 132 31 47 69 16 -+38 55 13 81 118 28 113 163 39 119 171 41 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 118 171 41 92 132 31 -+10 15 3 0 0 0 0 0 0 36 52 12 115 166 39 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 118 170 40 -+118 171 40 102 148 35 64 92 22 34 49 12 65 94 22 106 153 36 -+118 171 40 117 170 40 117 169 40 117 169 40 117 169 40 117 169 40 -+118 170 40 107 154 36 55 80 19 15 21 5 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+29 42 10 101 146 34 118 171 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 118 171 40 113 163 39 -+75 109 26 27 40 9 36 52 12 89 128 30 116 167 40 118 171 40 -+117 169 40 117 169 40 117 169 40 117 169 40 118 170 40 104 150 35 -+16 23 5 0 0 0 0 0 0 53 76 18 118 171 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 119 171 41 109 157 37 -+67 96 23 23 34 8 42 61 14 96 138 32 118 170 40 118 170 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 74 107 25 10 15 3 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 31 45 11 101 146 34 118 170 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+119 171 41 102 148 35 47 69 16 14 20 5 50 72 17 102 148 35 -+118 171 40 117 169 40 117 169 40 117 169 40 118 170 40 102 148 35 -+15 21 5 0 0 0 0 0 0 50 72 17 118 170 40 117 169 40 -+117 169 40 117 169 40 118 170 40 116 167 40 84 121 28 27 40 9 -+19 27 6 74 107 25 114 165 39 118 171 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 75 109 26 10 15 4 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 38 55 13 102 148 35 118 171 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 118 170 40 115 167 39 77 111 26 17 25 6 19 27 6 -+77 111 26 115 166 39 118 170 40 117 169 40 119 172 41 81 118 28 -+3 4 1 0 0 0 0 0 0 27 40 9 111 160 38 118 170 40 -+117 169 40 118 171 40 105 151 36 50 72 17 10 15 3 38 55 13 -+100 144 34 118 171 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 79 115 27 15 21 5 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 10 15 3 64 92 22 111 160 38 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 118 171 40 96 138 32 32 47 11 -+3 4 1 50 72 17 107 154 36 120 173 41 105 151 36 31 45 11 -+0 0 0 0 0 0 0 0 0 3 4 1 65 94 22 117 169 40 -+118 170 40 89 128 30 26 37 9 3 4 1 60 86 20 111 161 38 -+118 171 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+97 141 33 36 52 12 1 1 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 14 20 5 75 109 26 117 168 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 118 171 40 107 154 36 -+45 64 15 2 3 1 31 45 11 75 109 26 32 47 11 0 1 0 -+0 0 0 0 0 0 0 0 0 0 0 0 10 15 3 55 80 19 -+65 94 22 11 16 4 11 16 4 75 109 26 116 168 40 118 170 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 118 170 40 107 154 36 -+47 69 16 3 4 1 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 12 18 4 69 100 23 111 161 38 118 171 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 118 170 40 -+111 160 38 50 72 17 2 3 1 2 3 1 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 -+1 1 0 12 18 4 81 118 28 118 170 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 170 40 118 171 40 101 146 34 -+42 61 14 2 3 1 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 3 4 1 36 52 12 89 128 30 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+118 171 41 101 146 34 14 20 5 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 47 69 16 118 170 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 170 40 111 160 38 69 100 23 19 27 6 -+0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 11 16 4 69 100 23 -+115 167 39 119 172 41 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+119 172 41 75 109 26 3 4 1 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 23 34 8 106 153 36 118 170 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+117 169 40 118 170 40 119 172 41 105 151 36 42 61 14 2 3 1 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 15 21 5 -+45 64 15 80 116 27 114 165 39 118 170 40 117 169 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 119 172 41 -+97 141 33 20 30 7 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 1 1 0 53 76 18 114 165 39 118 171 40 117 169 40 -+117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 -+118 171 40 104 150 35 64 92 22 31 45 11 10 15 3 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 36 52 12 97 141 33 109 158 37 113 163 39 116 168 40 -+117 169 40 117 170 40 118 170 40 119 172 41 115 167 39 84 121 28 -+23 34 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 3 4 1 50 72 17 102 148 35 118 171 40 -+119 171 41 118 170 40 117 169 40 117 169 40 115 166 39 111 161 38 -+109 157 37 79 115 27 12 18 4 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 3 4 1 15 21 5 23 34 8 45 64 15 106 153 36 -+116 167 40 111 160 38 101 146 34 79 115 27 42 61 14 10 15 3 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 1 1 0 20 30 7 60 86 20 -+89 128 30 106 153 36 113 163 39 117 169 40 84 121 28 29 42 10 -+19 27 6 10 15 3 2 3 1 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 16 23 5 38 55 13 -+36 52 12 26 37 9 12 18 4 2 3 1 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 1 0 0 19 2 7 52 5 18 -+78 7 27 88 8 31 81 7 29 56 5 19 25 2 9 3 0 1 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+3 4 1 19 27 6 31 45 11 38 55 13 32 47 11 3 4 1 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 1 -+9 0 3 12 1 4 9 0 3 4 0 1 0 0 0 0 0 0 -+0 0 0 0 0 0 28 3 10 99 9 35 156 14 55 182 16 64 -+189 17 66 190 17 67 189 17 66 184 17 65 166 15 58 118 13 41 -+45 4 16 3 0 1 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 11 1 4 52 5 18 101 9 35 134 12 47 -+151 14 53 154 14 54 151 14 53 113 10 40 11 1 4 0 0 0 -+3 0 1 67 6 24 159 14 56 190 17 67 190 17 67 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 191 17 67 -+174 16 61 101 9 35 14 1 5 0 0 0 35 3 12 108 10 38 -+122 11 43 122 11 43 112 10 39 87 8 30 50 5 17 13 1 5 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+3 0 1 56 5 19 141 13 49 182 16 64 191 17 67 191 17 67 -+190 17 67 190 17 67 191 17 67 113 10 40 3 0 1 1 0 0 -+79 7 28 180 16 63 190 17 67 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+189 17 66 188 17 66 122 11 43 11 1 4 41 4 14 176 16 62 -+191 17 67 191 17 67 191 17 67 190 17 67 181 16 63 146 13 51 -+75 7 26 10 1 4 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 1 2 -+90 8 32 178 16 62 191 17 67 188 17 66 188 17 66 188 17 66 -+188 17 66 190 17 67 141 13 49 22 2 8 0 0 0 41 4 14 -+173 16 61 190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 88 8 31 1 0 0 89 8 31 -+185 17 65 189 17 66 188 17 66 188 17 66 189 17 66 191 17 67 -+186 17 65 124 11 43 25 2 9 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 2 0 1 89 8 31 -+184 17 65 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+190 17 67 151 14 53 34 3 12 0 0 0 0 0 0 79 7 28 -+190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 191 17 67 146 13 51 9 1 3 7 1 2 -+108 10 38 187 17 66 189 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 190 17 67 141 13 49 22 2 8 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 52 5 18 176 16 62 -+189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 -+151 14 53 38 3 13 0 0 0 0 0 0 0 0 0 50 5 17 -+180 16 63 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 191 17 67 141 13 49 7 1 3 0 0 0 -+11 1 4 112 10 39 187 17 66 189 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 190 17 67 113 10 40 5 0 2 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 7 1 3 132 12 46 191 17 67 -+188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 146 13 51 -+35 3 12 0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 -+101 9 35 185 17 65 190 17 67 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 190 17 67 180 16 63 67 6 24 0 0 0 0 0 0 -+0 0 0 11 1 4 108 10 38 186 17 65 189 17 66 188 17 66 -+188 17 66 188 17 66 189 17 66 180 16 63 56 5 19 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 44 4 15 177 16 62 189 17 66 -+188 17 66 188 17 66 189 17 66 189 17 66 134 12 47 28 3 10 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+8 1 3 79 7 28 159 14 56 188 17 66 191 17 67 190 17 67 -+189 17 66 189 17 66 189 17 66 189 17 66 190 17 67 191 17 67 -+188 17 66 158 14 55 72 7 25 4 0 1 0 0 0 0 0 0 -+0 0 0 0 0 0 8 1 3 95 9 33 182 16 64 189 17 67 -+188 17 66 188 17 66 188 17 66 191 17 67 122 11 43 3 0 1 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 88 8 31 190 17 67 188 17 66 -+188 17 66 189 17 66 185 17 65 113 10 40 18 2 6 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 1 0 0 24 2 8 77 7 27 124 11 43 154 14 54 -+168 15 59 173 16 61 173 16 61 168 15 59 154 14 54 124 11 43 -+77 7 27 22 2 8 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 5 0 2 77 7 27 173 16 61 -+190 17 67 188 17 66 188 17 66 190 17 67 164 15 57 23 2 8 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 1 0 0 118 13 41 191 17 67 188 17 66 -+190 17 67 174 16 61 87 8 30 8 1 3 0 0 0 0 0 0 -+0 0 0 0 0 0 10 1 4 29 3 10 40 4 14 36 3 13 -+18 2 6 2 0 1 0 0 0 0 0 0 3 0 1 14 1 5 -+26 2 9 33 3 11 32 3 11 25 2 9 13 1 5 3 0 1 -+0 0 0 14 1 5 56 5 19 95 9 33 109 10 38 101 9 35 -+77 7 27 35 3 12 5 0 2 0 0 0 1 0 0 56 5 19 -+156 14 55 190 17 67 188 17 66 188 17 66 182 16 64 50 5 17 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 5 0 2 134 12 47 191 17 67 189 17 66 -+151 14 53 52 5 18 2 0 1 0 0 0 0 0 0 1 0 0 -+28 3 10 90 8 32 146 13 51 170 15 60 178 16 62 174 16 61 -+158 14 55 112 10 39 40 4 14 1 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 1 -+56 5 19 146 13 51 183 17 64 191 17 67 191 17 67 191 17 67 -+188 17 66 173 16 61 122 11 43 41 4 14 1 0 0 0 0 0 -+30 3 10 124 11 43 185 17 65 190 17 67 187 17 66 67 6 24 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 6 1 2 134 12 47 168 15 59 99 9 35 -+21 2 7 0 0 0 0 0 0 0 0 0 6 1 2 77 7 27 -+162 15 57 190 17 67 191 17 67 189 17 66 189 17 66 189 17 66 -+190 17 67 191 17 67 169 15 59 75 7 26 3 0 1 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 2 0 1 79 7 28 -+178 16 62 191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 189 17 66 191 17 67 170 15 60 79 7 28 5 0 2 -+0 0 0 10 1 3 78 7 27 159 14 56 188 17 66 75 7 26 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 1 0 0 35 3 12 29 3 10 2 0 1 -+0 0 0 0 0 0 0 0 0 9 1 3 101 9 35 183 17 64 -+190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 190 17 67 178 16 63 67 6 23 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 52 5 18 174 16 61 -+190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 190 17 67 182 16 64 89 8 31 -+4 0 1 0 0 0 0 0 0 25 2 9 73 7 26 31 3 11 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 4 0 1 98 9 34 187 17 66 189 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 190 17 67 158 14 55 25 2 9 -+0 0 0 0 0 0 0 0 0 8 1 3 134 12 47 191 17 67 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 180 16 63 -+68 6 24 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 6 1 2 19 2 7 3 0 1 0 0 0 0 0 0 -+0 0 0 0 0 0 65 6 23 180 16 63 189 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 83 8 29 -+0 0 0 0 0 0 0 0 0 41 4 14 177 16 62 189 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 -+159 14 56 28 3 10 0 0 0 0 0 0 0 0 0 23 2 8 -+41 4 14 5 0 2 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+23 2 8 113 10 40 159 14 56 65 6 23 0 0 0 0 0 0 -+0 0 0 16 1 6 146 13 51 191 17 67 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 191 17 67 132 12 46 -+5 0 2 0 0 0 0 0 0 77 7 27 189 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+190 17 67 98 9 34 0 0 0 0 0 0 12 1 4 134 12 47 -+178 16 63 108 10 38 16 1 6 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 30 3 10 -+141 13 49 190 17 67 191 17 67 134 12 47 6 1 2 0 0 0 -+0 0 0 68 6 24 186 17 65 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 156 14 55 -+14 1 5 0 0 0 0 0 0 98 9 34 191 17 67 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+190 17 67 156 14 55 19 2 7 0 0 0 47 4 16 181 16 63 -+190 17 67 189 17 66 126 14 44 17 2 6 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 16 1 6 134 12 47 -+191 17 67 188 17 66 190 17 67 162 15 57 19 2 7 0 0 0 -+3 0 1 123 11 43 191 17 67 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 163 15 57 -+20 2 7 0 0 0 0 0 0 101 9 35 191 17 67 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 182 16 64 52 5 18 0 0 0 73 7 26 188 17 66 -+188 17 66 188 17 66 189 17 66 109 10 38 5 0 2 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 95 9 33 189 17 66 -+188 17 66 188 17 66 189 17 66 171 15 60 29 3 10 0 0 0 -+16 1 6 156 14 55 190 17 67 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 158 14 55 -+17 2 6 0 0 0 0 0 0 85 8 30 190 17 67 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 189 17 66 81 7 29 0 0 0 85 8 30 190 17 67 -+188 17 66 188 17 66 189 17 66 180 16 63 56 5 19 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 25 2 9 162 15 57 190 17 67 -+188 17 66 188 17 66 189 17 66 173 16 61 31 3 11 0 0 0 -+30 3 10 171 15 60 189 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 191 17 67 141 13 49 -+7 1 2 0 0 0 0 0 0 56 5 19 183 17 64 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 191 17 67 98 9 34 0 0 0 88 8 31 190 17 67 -+188 17 66 188 17 66 188 17 66 191 17 67 124 11 43 5 0 2 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 68 6 24 187 17 66 188 17 66 -+188 17 66 188 17 66 189 17 66 170 15 60 28 3 10 0 0 0 -+34 3 12 174 16 61 189 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 191 17 67 101 9 35 -+0 0 0 0 0 0 0 0 0 21 2 7 159 14 56 190 17 67 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 191 17 67 98 9 34 0 0 0 81 7 29 189 17 66 -+188 17 66 188 17 66 188 17 66 189 17 66 168 15 59 28 3 10 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 109 10 38 191 17 67 188 17 66 -+188 17 66 188 17 66 190 17 67 163 15 57 21 2 7 0 0 0 -+26 2 9 168 15 59 189 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 189 17 66 180 16 63 47 4 16 -+0 0 0 0 0 0 0 0 0 0 0 0 108 10 38 190 17 67 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 189 17 66 78 7 27 0 0 0 68 6 24 187 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 183 17 64 56 5 19 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 3 0 1 131 12 46 191 17 67 188 17 66 -+188 17 66 188 17 66 190 17 67 151 14 53 12 1 4 0 0 0 -+11 1 4 146 13 51 190 17 67 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 191 17 67 126 14 44 7 1 2 -+0 0 0 0 0 0 0 0 0 0 0 0 32 3 11 164 15 58 -+190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+189 17 66 178 16 62 44 4 15 0 0 0 50 5 17 182 16 64 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 72 7 25 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 5 0 2 134 12 47 191 17 67 188 17 66 -+188 17 66 188 17 66 191 17 67 131 12 46 3 0 1 0 0 0 -+0 0 0 101 9 35 190 17 67 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 190 17 67 170 15 60 44 4 15 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 77 7 27 -+183 17 64 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+191 17 67 134 12 47 9 1 3 0 0 0 31 3 11 171 15 60 -+189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 72 7 25 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 2 0 1 124 11 43 191 17 67 188 17 66 -+188 17 66 188 17 66 191 17 67 101 9 35 0 0 0 0 0 0 -+0 0 0 35 3 12 168 15 59 190 17 67 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 189 17 66 182 16 64 77 7 27 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6 1 2 -+99 9 35 185 17 65 189 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 -+177 16 62 56 5 19 0 0 0 0 0 0 13 1 5 151 14 53 -+190 17 67 188 17 66 188 17 66 188 17 66 185 17 65 56 5 19 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 99 9 35 191 17 67 188 17 66 -+188 17 66 188 17 66 186 17 65 65 6 23 0 0 0 0 0 0 -+0 0 0 0 0 0 79 7 28 182 16 64 190 17 67 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+191 17 67 177 16 62 83 8 29 4 0 1 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+8 1 3 89 8 31 175 16 62 191 17 67 189 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 181 16 63 -+85 8 30 3 0 1 0 0 0 0 0 0 1 0 0 118 13 41 -+191 17 67 188 17 66 188 17 66 189 17 66 173 16 61 34 3 12 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 56 5 19 183 17 64 188 17 66 -+188 17 66 189 17 66 169 15 59 30 3 10 0 0 0 0 0 0 -+0 0 0 0 0 0 5 0 2 83 8 29 173 16 61 191 17 67 -+190 17 67 189 17 66 189 17 66 190 17 67 191 17 67 187 17 66 -+151 14 53 56 5 19 3 0 1 0 0 0 16 1 6 50 5 17 -+79 7 28 95 9 33 95 9 33 75 7 26 41 4 14 10 1 4 -+0 0 0 2 0 1 50 5 17 132 12 46 178 16 62 190 17 67 -+191 17 67 191 17 67 191 17 67 186 17 65 154 14 54 68 6 24 -+4 0 1 0 0 0 0 0 0 0 0 0 0 0 0 72 7 25 -+187 17 66 188 17 66 188 17 66 191 17 67 141 13 49 9 1 3 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 14 1 5 151 14 53 190 17 67 -+188 17 66 191 17 67 131 12 46 5 0 2 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 2 0 1 44 4 15 113 10 40 -+156 14 55 173 16 61 174 16 61 164 15 58 134 12 47 77 7 27 -+18 2 6 0 0 0 16 1 6 85 8 30 151 14 53 182 16 64 -+189 17 66 191 17 67 190 17 67 188 17 66 177 16 62 141 13 49 -+68 6 24 8 1 3 0 0 0 8 1 3 44 4 15 88 8 31 -+113 10 40 122 11 43 108 10 38 67 6 24 20 2 7 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 28 3 10 -+166 15 58 190 17 67 188 17 66 187 17 66 79 7 28 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 73 7 26 185 17 65 -+189 17 66 184 17 65 65 6 23 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 1 -+17 2 6 32 3 11 34 3 12 22 2 8 6 1 2 0 0 0 -+0 0 0 38 3 13 141 13 49 188 17 66 190 17 67 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 191 17 67 -+184 17 65 122 11 43 21 2 7 0 0 0 0 0 0 0 0 0 -+0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 -+108 10 38 191 17 67 191 17 67 141 13 49 16 1 6 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 8 1 3 112 10 39 -+186 17 65 124 11 43 10 1 4 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+36 3 13 156 14 55 191 17 67 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+189 17 66 190 17 67 134 12 47 18 2 6 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 7 1 2 41 4 14 75 7 26 66 5 23 19 2 7 -+26 2 9 144 13 50 154 14 54 40 4 14 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 13 1 5 -+56 5 19 19 2 7 0 0 0 7 1 2 29 3 10 35 3 12 -+19 2 7 2 0 1 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 13 1 5 -+134 12 47 191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 189 17 67 108 10 38 3 0 1 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 -+40 4 14 124 11 43 177 16 62 188 17 66 187 17 66 144 13 50 -+24 2 8 17 2 6 22 2 8 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 19 2 7 122 11 43 171 15 60 175 16 62 -+159 14 56 112 10 39 40 4 14 2 0 1 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 72 7 25 -+186 17 65 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 189 17 66 174 16 61 41 4 14 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 3 0 1 72 7 25 -+168 15 59 191 17 67 189 17 66 188 17 66 188 17 66 190 17 67 -+95 9 33 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 95 9 33 191 17 67 189 17 66 189 17 66 -+190 17 67 191 17 67 171 15 60 90 8 32 12 1 4 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 132 12 46 -+191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 190 17 67 98 9 34 0 0 0 -+0 0 0 0 0 0 0 0 0 5 0 2 88 8 31 180 16 63 -+190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 191 17 67 -+146 13 51 11 1 4 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 9 1 3 144 13 50 191 17 67 188 17 66 188 17 66 -+188 17 66 188 17 66 189 17 66 187 17 66 123 11 43 20 2 7 -+0 0 0 0 0 0 0 0 0 0 0 0 21 2 7 163 15 57 -+190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 191 17 67 134 12 47 5 0 2 -+0 0 0 0 0 0 3 0 1 88 8 31 182 16 64 189 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 -+171 15 60 31 3 11 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 20 2 7 162 15 57 190 17 67 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 132 12 46 -+20 2 7 0 0 0 0 0 0 0 0 0 32 3 11 173 16 61 -+189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 190 17 67 151 14 53 12 1 4 -+0 0 0 0 0 0 72 7 25 180 16 63 189 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+181 16 63 47 4 16 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 21 2 7 163 15 57 190 17 67 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 -+122 11 43 9 1 3 0 0 0 0 0 0 30 3 10 171 15 60 -+189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 190 17 67 146 13 51 10 1 4 -+0 0 0 38 3 13 166 15 58 190 17 67 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+183 17 64 52 5 18 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 13 1 5 154 14 54 190 17 67 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+186 17 65 79 7 28 0 0 0 0 0 0 14 1 5 156 14 54 -+190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 191 17 67 124 11 43 2 0 1 -+5 0 2 122 11 43 191 17 67 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+182 16 64 47 4 16 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 3 0 1 126 14 44 191 17 67 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+190 17 67 158 14 55 23 2 8 0 0 0 1 0 0 113 10 40 -+191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 78 7 27 0 0 0 -+47 4 16 177 16 62 189 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 -+173 16 61 34 3 12 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 85 8 30 189 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 79 7 28 0 0 0 0 0 0 47 4 16 -+175 16 62 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 190 17 67 156 14 55 22 2 8 0 0 0 -+109 10 38 191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 -+151 14 53 13 1 5 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 35 3 12 173 16 61 189 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 191 17 67 134 12 47 7 1 2 0 0 0 3 0 1 -+99 9 35 188 17 66 189 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 189 17 66 181 16 63 68 6 24 0 0 0 18 2 6 -+156 14 55 190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 -+101 9 35 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 3 0 1 118 13 41 191 17 67 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 189 17 66 168 15 59 28 3 10 0 0 0 0 0 0 -+12 1 4 113 10 40 187 17 66 189 17 67 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+190 17 67 180 16 63 88 8 31 4 0 1 0 0 0 47 4 16 -+180 16 63 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 168 15 59 -+36 3 13 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 38 3 13 164 15 58 190 17 67 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 182 16 64 50 5 17 0 0 0 0 0 0 -+0 0 0 11 1 4 90 8 32 169 15 59 190 17 67 190 17 67 -+189 17 66 189 17 66 189 17 66 189 17 66 191 17 67 189 17 66 -+158 14 55 68 6 24 4 0 1 0 0 0 0 0 0 73 7 26 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 189 17 66 185 17 65 83 8 29 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 65 6 23 174 16 61 -+190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 185 17 65 56 5 19 0 0 0 0 0 0 -+0 0 0 0 0 0 2 0 1 35 3 12 99 9 35 146 13 51 -+170 15 60 177 16 62 177 16 62 166 15 58 141 13 49 85 8 30 -+24 2 8 0 0 0 0 0 0 0 0 0 0 0 0 85 8 30 -+190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 189 17 66 112 10 39 8 1 3 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 68 6 24 -+170 15 60 191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 182 16 64 50 5 17 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 11 1 4 -+28 3 10 40 4 14 38 3 13 25 2 9 8 1 3 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 78 7 27 -+189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 189 17 66 187 17 66 113 10 40 14 1 5 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 -+47 4 16 141 13 49 186 17 65 191 17 67 190 17 67 189 17 66 -+189 17 66 191 17 67 156 14 55 20 2 7 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 44 4 15 -+178 16 62 190 17 67 188 17 66 188 17 66 188 17 66 190 17 67 -+191 17 67 173 16 61 90 8 32 10 1 4 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 14 1 5 68 6 24 131 12 46 162 15 57 174 16 61 -+171 15 60 146 13 51 56 5 19 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 3 0 1 14 1 5 29 3 10 -+41 4 14 47 4 16 50 5 17 45 4 16 34 3 12 18 2 6 -+5 0 2 0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 -+90 8 32 169 15 59 185 17 65 187 17 66 182 16 64 163 15 57 -+113 10 40 41 4 14 2 0 1 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 5 0 2 21 2 7 34 3 12 -+29 3 10 11 1 4 0 0 0 0 0 0 0 0 0 0 0 0 -+3 0 1 32 3 11 79 7 28 124 11 43 154 14 54 171 15 60 -+180 16 63 182 16 64 182 16 64 180 16 63 174 16 61 159 14 56 -+132 12 46 88 8 31 34 3 12 3 0 1 0 0 0 0 0 0 -+3 0 1 29 3 10 56 5 19 65 6 23 50 5 17 23 2 8 -+3 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 25 2 9 -+109 10 38 169 15 59 189 17 66 191 17 67 190 17 67 189 17 66 -+189 17 66 188 17 66 188 17 66 188 17 66 189 17 66 190 17 67 -+191 17 67 190 17 67 171 15 60 98 9 34 10 1 3 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 14 1 5 141 13 49 -+191 17 67 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 189 17 67 186 17 65 65 6 23 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 23 2 8 166 15 58 -+190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 189 17 66 176 16 62 45 4 16 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 83 8 29 -+183 17 64 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+188 17 66 189 17 66 185 17 65 95 9 33 3 0 1 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 -+85 8 30 176 16 62 191 17 67 188 17 66 188 17 66 188 17 66 -+188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 -+191 17 67 180 16 63 95 9 33 7 1 3 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+2 0 1 52 5 18 141 13 49 185 17 65 191 17 67 189 17 67 -+189 17 66 188 17 66 188 17 66 189 17 66 191 17 67 187 17 66 -+146 13 51 56 5 19 4 0 1 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 14 1 5 68 6 24 131 12 46 166 15 58 -+180 16 63 183 17 64 180 16 63 168 15 59 134 12 47 75 7 26 -+17 2 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 24 2 8 -+44 4 15 52 5 18 45 4 16 26 2 9 6 1 2 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -+0 0 0 0 0 0 0 0 0 diff --git a/target/linux/brcm2708/patches-4.9/0033-dmaengine-Add-support-for-BCM2708.patch b/target/linux/brcm2708/patches-4.9/0033-dmaengine-Add-support-for-BCM2708.patch deleted file mode 100644 index a2f45519b669..000000000000 --- a/target/linux/brcm2708/patches-4.9/0033-dmaengine-Add-support-for-BCM2708.patch +++ /dev/null @@ -1,623 +0,0 @@ -From 33444cee555204ee605e6ec9050b04e874fb0090 Mon Sep 17 00:00:00 2001 -From: Florian Meier -Date: Fri, 22 Nov 2013 14:22:53 +0100 -Subject: [PATCH] dmaengine: Add support for BCM2708 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add support for DMA controller of BCM2708 as used in the Raspberry Pi. -Currently it only supports cyclic DMA. - -Signed-off-by: Florian Meier - -dmaengine: expand functionality by supporting scatter/gather transfers sdhci-bcm2708 and dma.c: fix for LITE channels - -DMA: fix cyclic LITE length overflow bug - -dmaengine: bcm2708: Remove chancnt affectations - -Mirror bcm2835-dma.c commit 9eba5536a7434c69d8c185d4bd1c70734d92287d: -chancnt is already filled by dma_async_device_register, which uses the channel -list to know how much channels there is. - -Since it's already filled, we can safely remove it from the drivers' probe -function. - -Signed-off-by: Noralf Trønnes - -dmaengine: bcm2708: overwrite dreq only if it is not set - -dreq is set when the DMA channel is fetched from Device Tree. -slave_id is set using dmaengine_slave_config(). -Only overwrite dreq with slave_id if it is not set. - -dreq/slave_id in the cyclic DMA case is not touched, because I don't -have hardware to test with. - -Signed-off-by: Noralf Trønnes - -dmaengine: bcm2708: do device registration in the board file - -Don't register the device in the driver. Do it in the board file. - -Signed-off-by: Noralf Trønnes - -dmaengine: bcm2708: don't restrict DT support to ARCH_BCM2835 - -Both ARCH_BCM2835 and ARCH_BCM270x are built with OF now. -Add Device Tree support to the non ARCH_BCM2835 case. -Use the same driver name regardless of architecture. - -Signed-off-by: Noralf Trønnes - -BCM270x_DT: add bcm2835-dma entry - -Add Device Tree entry for bcm2835-dma. -The entry doesn't contain any resources since they are handled -by the arch/arm/mach-bcm270x/dma.c driver. -In non-DT mode, don't add the device in the board file. - -Signed-off-by: Noralf Trønnes - -bcm2708-dmaengine: Add debug options - -BCM270x: Add memory and irq resources to dmaengine device and DT - -Prepare for merging of the legacy DMA API arch driver dma.c -with bcm2708-dmaengine by adding memory and irq resources both -to platform file device and Device Tree node. -Don't use BCM_DMAMAN_DRIVER_NAME so we don't have to include mach/dma.h - -Signed-off-by: Noralf Trønnes - -dmaengine: bcm2708: Merge with arch dma.c driver and disable dma.c - -Merge the legacy DMA API driver with bcm2708-dmaengine. -This is done so we can use bcm2708_fb on ARCH_BCM2835 (mailbox -driver is also needed). - -Changes to the dma.c code: -- Use BIT() macro. -- Cutdown some comments to one line. -- Add mutex to vc_dmaman and use this, since the dev lock is locked - during probing of the engine part. -- Add global g_dmaman variable since drvdata is used by the engine part. -- Restructure for readability: - vc_dmaman_chan_alloc() - vc_dmaman_chan_free() - bcm_dma_chan_free() -- Restructure bcm_dma_chan_alloc() to simplify error handling. -- Use device irq resources instead of hardcoded bcm_dma_irqs table. -- Remove dev_dmaman_register() and code it directly. -- Remove dev_dmaman_deregister() and code it directly. -- Simplify bcm_dmaman_probe() using devm_* functions. -- Get dmachans from DT if available. -- Keep 'dma.dmachans' module argument name for backwards compatibility. - -Make it available on ARCH_BCM2835 as well. - -Signed-off-by: Noralf Trønnes - -dmaengine: bcm2708: set residue_granularity field - -bcm2708-dmaengine supports residue reporting at burst level -but didn't report this via the residue_granularity field. - -Without this field set properly we get playback issues with I2S cards. - -dmaengine: bcm2708-dmaengine: Fix memory leak when stopping a running transfer - -bcm2708-dmaengine: Use more DMA channels (but not 12) - -1) Only the bcm2708_fb drivers uses the legacy DMA API, and -it requires a BULK-capable channel, so all other types -(FAST, NORMAL and LITE) can be made available to the regular -DMA API. - -2) DMA channels 11-14 share an interrupt. The driver can't -handle this, so don't use channels 12-14 (12 was used, probably -because it appears to have an interrupt, but in reality that -interrupt is for activity on ANY channel). This may explain -a lockup encountered when running out of DMA channels. - -The combined effect of this patch is to leave 7 DMA channels -available + channel 0 for bcm2708_fb via the legacy API. - -See: https://github.com/raspberrypi/linux/issues/1110 - https://github.com/raspberrypi/linux/issues/1108 - -dmaengine: bcm2708: Make legacy API available for bcm2835-dma - -bcm2708_fb uses the legacy DMA API, so in order to start using -bcm2835-dma, bcm2835-dma has to support the legacy API. Make this -possible by exporting bcm_dmaman_probe() and bcm_dmaman_remove(). - -Signed-off-by: Noralf Trønnes - -dmaengine: bcm2708: Change DT compatible string - -Both bcm2835-dma and bcm2708-dmaengine have the same compatible string. -So change compatible to "brcm,bcm2708-dma". - -Signed-off-by: Noralf Trønnes - -dmaengine: bcm2708: Remove driver but keep legacy API - -Dropping non-DT support means we don't need this driver, -but we still need the legacy DMA API. - -Signed-off-by: Noralf Trønnes - -bcm2708-dmaengine - Fix arm64 portability/build issues ---- - drivers/dma/Kconfig | 6 +- - drivers/dma/Makefile | 1 + - drivers/dma/bcm2708-dmaengine.c | 281 ++++++++++++++++++++++++++++++ - include/linux/platform_data/dma-bcm2708.h | 143 +++++++++++++++ - 4 files changed, 430 insertions(+), 1 deletion(-) - create mode 100644 drivers/dma/bcm2708-dmaengine.c - create mode 100644 include/linux/platform_data/dma-bcm2708.h - ---- a/drivers/dma/Kconfig -+++ b/drivers/dma/Kconfig -@@ -108,7 +108,7 @@ config COH901318 - - config DMA_BCM2835 - tristate "BCM2835 DMA engine support" -- depends on ARCH_BCM2835 || ARCH_BCM2708 || ARCH_BCM2709 -+ depends on ARCH_BCM2835 - select DMA_ENGINE - select DMA_VIRTUAL_CHANNELS - -@@ -499,6 +499,10 @@ config TIMB_DMA - help - Enable support for the Timberdale FPGA DMA engine. - -+config DMA_BCM2708 -+ tristate "BCM2708 DMA legacy API support" -+ depends on DMA_BCM2835 -+ - config TI_CPPI41 - tristate "AM33xx CPPI41 DMA support" - depends on ARCH_OMAP ---- a/drivers/dma/Makefile -+++ b/drivers/dma/Makefile -@@ -18,6 +18,7 @@ obj-$(CONFIG_AT_HDMAC) += at_hdmac.o - obj-$(CONFIG_AT_XDMAC) += at_xdmac.o - obj-$(CONFIG_AXI_DMAC) += dma-axi-dmac.o - obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o -+obj-$(CONFIG_DMA_BCM2708) += bcm2708-dmaengine.o - obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o - obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o - obj-$(CONFIG_DMA_JZ4780) += dma-jz4780.o ---- /dev/null -+++ b/drivers/dma/bcm2708-dmaengine.c -@@ -0,0 +1,281 @@ -+/* -+ * BCM2708 legacy DMA API -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "virt-dma.h" -+ -+#define CACHE_LINE_MASK 31 -+#define DEFAULT_DMACHAN_BITMAP 0x10 /* channel 4 only */ -+ -+/* valid only for channels 0 - 14, 15 has its own base address */ -+#define BCM2708_DMA_CHAN(n) ((n) << 8) /* base address */ -+#define BCM2708_DMA_CHANIO(dma_base, n) \ -+ ((void __iomem *)((char *)(dma_base) + BCM2708_DMA_CHAN(n))) -+ -+struct vc_dmaman { -+ void __iomem *dma_base; -+ u32 chan_available; /* bitmap of available channels */ -+ u32 has_feature[BCM_DMA_FEATURE_COUNT]; /* bitmap of feature presence */ -+ struct mutex lock; -+}; -+ -+static struct device *dmaman_dev; /* we assume there's only one! */ -+static struct vc_dmaman *g_dmaman; /* DMA manager */ -+ -+/* DMA Auxiliary Functions */ -+ -+/* A DMA buffer on an arbitrary boundary may separate a cache line into a -+ section inside the DMA buffer and another section outside it. -+ Even if we flush DMA buffers from the cache there is always the chance that -+ during a DMA someone will access the part of a cache line that is outside -+ the DMA buffer - which will then bring in unwelcome data. -+ Without being able to dictate our own buffer pools we must insist that -+ DMA buffers consist of a whole number of cache lines. -+*/ -+extern int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len) -+{ -+ int i; -+ -+ for (i = 0; i < sg_len; i++) { -+ if (sg_ptr[i].offset & CACHE_LINE_MASK || -+ sg_ptr[i].length & CACHE_LINE_MASK) -+ return 0; -+ } -+ -+ return 1; -+} -+EXPORT_SYMBOL_GPL(bcm_sg_suitable_for_dma); -+ -+extern void bcm_dma_start(void __iomem *dma_chan_base, -+ dma_addr_t control_block) -+{ -+ dsb(sy); /* ARM data synchronization (push) operation */ -+ -+ writel(control_block, dma_chan_base + BCM2708_DMA_ADDR); -+ writel(BCM2708_DMA_ACTIVE, dma_chan_base + BCM2708_DMA_CS); -+} -+EXPORT_SYMBOL_GPL(bcm_dma_start); -+ -+extern void bcm_dma_wait_idle(void __iomem *dma_chan_base) -+{ -+ dsb(sy); -+ -+ /* ugly busy wait only option for now */ -+ while (readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_ACTIVE) -+ cpu_relax(); -+} -+EXPORT_SYMBOL_GPL(bcm_dma_wait_idle); -+ -+extern bool bcm_dma_is_busy(void __iomem *dma_chan_base) -+{ -+ dsb(sy); -+ -+ return readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_ACTIVE; -+} -+EXPORT_SYMBOL_GPL(bcm_dma_is_busy); -+ -+/* Complete an ongoing DMA (assuming its results are to be ignored) -+ Does nothing if there is no DMA in progress. -+ This routine waits for the current AXI transfer to complete before -+ terminating the current DMA. If the current transfer is hung on a DREQ used -+ by an uncooperative peripheral the AXI transfer may never complete. In this -+ case the routine times out and return a non-zero error code. -+ Use of this routine doesn't guarantee that the ongoing or aborted DMA -+ does not produce an interrupt. -+*/ -+extern int bcm_dma_abort(void __iomem *dma_chan_base) -+{ -+ unsigned long int cs; -+ int rc = 0; -+ -+ cs = readl(dma_chan_base + BCM2708_DMA_CS); -+ -+ if (BCM2708_DMA_ACTIVE & cs) { -+ long int timeout = 10000; -+ -+ /* write 0 to the active bit - pause the DMA */ -+ writel(0, dma_chan_base + BCM2708_DMA_CS); -+ -+ /* wait for any current AXI transfer to complete */ -+ while (0 != (cs & BCM2708_DMA_ISPAUSED) && --timeout >= 0) -+ cs = readl(dma_chan_base + BCM2708_DMA_CS); -+ -+ if (0 != (cs & BCM2708_DMA_ISPAUSED)) { -+ /* we'll un-pause when we set of our next DMA */ -+ rc = -ETIMEDOUT; -+ -+ } else if (BCM2708_DMA_ACTIVE & cs) { -+ /* terminate the control block chain */ -+ writel(0, dma_chan_base + BCM2708_DMA_NEXTCB); -+ -+ /* abort the whole DMA */ -+ writel(BCM2708_DMA_ABORT | BCM2708_DMA_ACTIVE, -+ dma_chan_base + BCM2708_DMA_CS); -+ } -+ } -+ -+ return rc; -+} -+EXPORT_SYMBOL_GPL(bcm_dma_abort); -+ -+ /* DMA Manager Device Methods */ -+ -+static void vc_dmaman_init(struct vc_dmaman *dmaman, void __iomem *dma_base, -+ u32 chans_available) -+{ -+ dmaman->dma_base = dma_base; -+ dmaman->chan_available = chans_available; -+ dmaman->has_feature[BCM_DMA_FEATURE_FAST_ORD] = 0x0c; /* 2 & 3 */ -+ dmaman->has_feature[BCM_DMA_FEATURE_BULK_ORD] = 0x01; /* 0 */ -+ dmaman->has_feature[BCM_DMA_FEATURE_NORMAL_ORD] = 0xfe; /* 1 to 7 */ -+ dmaman->has_feature[BCM_DMA_FEATURE_LITE_ORD] = 0x7f00; /* 8 to 14 */ -+} -+ -+static int vc_dmaman_chan_alloc(struct vc_dmaman *dmaman, -+ unsigned required_feature_set) -+{ -+ u32 chans; -+ int chan = 0; -+ int feature; -+ -+ chans = dmaman->chan_available; -+ for (feature = 0; feature < BCM_DMA_FEATURE_COUNT; feature++) -+ /* select the subset of available channels with the desired -+ features */ -+ if (required_feature_set & (1 << feature)) -+ chans &= dmaman->has_feature[feature]; -+ -+ if (!chans) -+ return -ENOENT; -+ -+ /* return the ordinal of the first channel in the bitmap */ -+ while (chans != 0 && (chans & 1) == 0) { -+ chans >>= 1; -+ chan++; -+ } -+ /* claim the channel */ -+ dmaman->chan_available &= ~(1 << chan); -+ -+ return chan; -+} -+ -+static int vc_dmaman_chan_free(struct vc_dmaman *dmaman, int chan) -+{ -+ if (chan < 0) -+ return -EINVAL; -+ -+ if ((1 << chan) & dmaman->chan_available) -+ return -EIDRM; -+ -+ dmaman->chan_available |= (1 << chan); -+ -+ return 0; -+} -+ -+/* DMA Manager Monitor */ -+ -+extern int bcm_dma_chan_alloc(unsigned required_feature_set, -+ void __iomem **out_dma_base, int *out_dma_irq) -+{ -+ struct vc_dmaman *dmaman = g_dmaman; -+ struct platform_device *pdev = to_platform_device(dmaman_dev); -+ struct resource *r; -+ int chan; -+ -+ if (!dmaman_dev) -+ return -ENODEV; -+ -+ mutex_lock(&dmaman->lock); -+ chan = vc_dmaman_chan_alloc(dmaman, required_feature_set); -+ if (chan < 0) -+ goto out; -+ -+ r = platform_get_resource(pdev, IORESOURCE_IRQ, (unsigned int)chan); -+ if (!r) { -+ dev_err(dmaman_dev, "failed to get irq for DMA channel %d\n", -+ chan); -+ vc_dmaman_chan_free(dmaman, chan); -+ chan = -ENOENT; -+ goto out; -+ } -+ -+ *out_dma_base = BCM2708_DMA_CHANIO(dmaman->dma_base, chan); -+ *out_dma_irq = r->start; -+ dev_dbg(dmaman_dev, -+ "Legacy API allocated channel=%d, base=%p, irq=%i\n", -+ chan, *out_dma_base, *out_dma_irq); -+ -+out: -+ mutex_unlock(&dmaman->lock); -+ -+ return chan; -+} -+EXPORT_SYMBOL_GPL(bcm_dma_chan_alloc); -+ -+extern int bcm_dma_chan_free(int channel) -+{ -+ struct vc_dmaman *dmaman = g_dmaman; -+ int rc; -+ -+ if (!dmaman_dev) -+ return -ENODEV; -+ -+ mutex_lock(&dmaman->lock); -+ rc = vc_dmaman_chan_free(dmaman, channel); -+ mutex_unlock(&dmaman->lock); -+ -+ return rc; -+} -+EXPORT_SYMBOL_GPL(bcm_dma_chan_free); -+ -+int bcm_dmaman_probe(struct platform_device *pdev, void __iomem *base, -+ u32 chans_available) -+{ -+ struct device *dev = &pdev->dev; -+ struct vc_dmaman *dmaman; -+ -+ dmaman = devm_kzalloc(dev, sizeof(*dmaman), GFP_KERNEL); -+ if (!dmaman) -+ return -ENOMEM; -+ -+ mutex_init(&dmaman->lock); -+ vc_dmaman_init(dmaman, base, chans_available); -+ g_dmaman = dmaman; -+ dmaman_dev = dev; -+ -+ dev_info(dev, "DMA legacy API manager at %p, dmachans=0x%x\n", -+ base, chans_available); -+ -+ return 0; -+} -+EXPORT_SYMBOL(bcm_dmaman_probe); -+ -+int bcm_dmaman_remove(struct platform_device *pdev) -+{ -+ dmaman_dev = NULL; -+ -+ return 0; -+} -+EXPORT_SYMBOL(bcm_dmaman_remove); -+ -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/include/linux/platform_data/dma-bcm2708.h -@@ -0,0 +1,143 @@ -+/* -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#ifndef _PLAT_BCM2708_DMA_H -+#define _PLAT_BCM2708_DMA_H -+ -+/* DMA CS Control and Status bits */ -+#define BCM2708_DMA_ACTIVE BIT(0) -+#define BCM2708_DMA_INT BIT(2) -+#define BCM2708_DMA_ISPAUSED BIT(4) /* Pause requested or not active */ -+#define BCM2708_DMA_ISHELD BIT(5) /* Is held by DREQ flow control */ -+#define BCM2708_DMA_ERR BIT(8) -+#define BCM2708_DMA_ABORT BIT(30) /* stop current CB, go to next, WO */ -+#define BCM2708_DMA_RESET BIT(31) /* WO, self clearing */ -+ -+/* DMA control block "info" field bits */ -+#define BCM2708_DMA_INT_EN BIT(0) -+#define BCM2708_DMA_TDMODE BIT(1) -+#define BCM2708_DMA_WAIT_RESP BIT(3) -+#define BCM2708_DMA_D_INC BIT(4) -+#define BCM2708_DMA_D_WIDTH BIT(5) -+#define BCM2708_DMA_D_DREQ BIT(6) -+#define BCM2708_DMA_S_INC BIT(8) -+#define BCM2708_DMA_S_WIDTH BIT(9) -+#define BCM2708_DMA_S_DREQ BIT(10) -+ -+#define BCM2708_DMA_BURST(x) (((x) & 0xf) << 12) -+#define BCM2708_DMA_PER_MAP(x) ((x) << 16) -+#define BCM2708_DMA_WAITS(x) (((x) & 0x1f) << 21) -+ -+#define BCM2708_DMA_DREQ_EMMC 11 -+#define BCM2708_DMA_DREQ_SDHOST 13 -+ -+#define BCM2708_DMA_CS 0x00 /* Control and Status */ -+#define BCM2708_DMA_ADDR 0x04 -+/* the current control block appears in the following registers - read only */ -+#define BCM2708_DMA_INFO 0x08 -+#define BCM2708_DMA_SOURCE_AD 0x0c -+#define BCM2708_DMA_DEST_AD 0x10 -+#define BCM2708_DMA_NEXTCB 0x1C -+#define BCM2708_DMA_DEBUG 0x20 -+ -+#define BCM2708_DMA4_CS (BCM2708_DMA_CHAN(4) + BCM2708_DMA_CS) -+#define BCM2708_DMA4_ADDR (BCM2708_DMA_CHAN(4) + BCM2708_DMA_ADDR) -+ -+#define BCM2708_DMA_TDMODE_LEN(w, h) ((h) << 16 | (w)) -+ -+/* When listing features we can ask for when allocating DMA channels give -+ those with higher priority smaller ordinal numbers */ -+#define BCM_DMA_FEATURE_FAST_ORD 0 -+#define BCM_DMA_FEATURE_BULK_ORD 1 -+#define BCM_DMA_FEATURE_NORMAL_ORD 2 -+#define BCM_DMA_FEATURE_LITE_ORD 3 -+#define BCM_DMA_FEATURE_FAST BIT(BCM_DMA_FEATURE_FAST_ORD) -+#define BCM_DMA_FEATURE_BULK BIT(BCM_DMA_FEATURE_BULK_ORD) -+#define BCM_DMA_FEATURE_NORMAL BIT(BCM_DMA_FEATURE_NORMAL_ORD) -+#define BCM_DMA_FEATURE_LITE BIT(BCM_DMA_FEATURE_LITE_ORD) -+#define BCM_DMA_FEATURE_COUNT 4 -+ -+struct bcm2708_dma_cb { -+ u32 info; -+ u32 src; -+ u32 dst; -+ u32 length; -+ u32 stride; -+ u32 next; -+ u32 pad[2]; -+}; -+ -+struct scatterlist; -+struct platform_device; -+ -+#ifdef CONFIG_DMA_BCM2708 -+ -+int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len); -+void bcm_dma_start(void __iomem *dma_chan_base, dma_addr_t control_block); -+void bcm_dma_wait_idle(void __iomem *dma_chan_base); -+bool bcm_dma_is_busy(void __iomem *dma_chan_base); -+int bcm_dma_abort(void __iomem *dma_chan_base); -+ -+/* return channel no or -ve error */ -+int bcm_dma_chan_alloc(unsigned preferred_feature_set, -+ void __iomem **out_dma_base, int *out_dma_irq); -+int bcm_dma_chan_free(int channel); -+ -+int bcm_dmaman_probe(struct platform_device *pdev, void __iomem *base, -+ u32 chans_available); -+int bcm_dmaman_remove(struct platform_device *pdev); -+ -+#else /* CONFIG_DMA_BCM2708 */ -+ -+static inline int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, -+ int sg_len) -+{ -+ return 0; -+} -+ -+static inline void bcm_dma_start(void __iomem *dma_chan_base, -+ dma_addr_t control_block) { } -+ -+static inline void bcm_dma_wait_idle(void __iomem *dma_chan_base) { } -+ -+static inline bool bcm_dma_is_busy(void __iomem *dma_chan_base) -+{ -+ return false; -+} -+ -+static inline int bcm_dma_abort(void __iomem *dma_chan_base) -+{ -+ return -EINVAL; -+} -+ -+static inline int bcm_dma_chan_alloc(unsigned preferred_feature_set, -+ void __iomem **out_dma_base, -+ int *out_dma_irq) -+{ -+ return -EINVAL; -+} -+ -+static inline int bcm_dma_chan_free(int channel) -+{ -+ return -EINVAL; -+} -+ -+static inline int bcm_dmaman_probe(struct platform_device *pdev, -+ void __iomem *base, u32 chans_available) -+{ -+ return 0; -+} -+ -+static inline int bcm_dmaman_remove(struct platform_device *pdev) -+{ -+ return 0; -+} -+ -+#endif /* CONFIG_DMA_BCM2708 */ -+ -+#endif /* _PLAT_BCM2708_DMA_H */ diff --git a/target/linux/brcm2708/patches-4.9/0034-MMC-added-alternative-MMC-driver.patch b/target/linux/brcm2708/patches-4.9/0034-MMC-added-alternative-MMC-driver.patch deleted file mode 100644 index 70fb8f3d8c12..000000000000 --- a/target/linux/brcm2708/patches-4.9/0034-MMC-added-alternative-MMC-driver.patch +++ /dev/null @@ -1,1743 +0,0 @@ -From 1620619c5fa6acae1e119d6461b5c9a2a9416e69 Mon Sep 17 00:00:00 2001 -From: gellert -Date: Fri, 15 Aug 2014 16:35:06 +0100 -Subject: [PATCH] MMC: added alternative MMC driver -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -mmc: Disable CMD23 transfers on all cards - -Pending wire-level investigation of these types of transfers -and associated errors on bcm2835-mmc, disable for now. Fallback of -CMD18/CMD25 transfers will be used automatically by the MMC layer. - -Reported/Tested-by: Gellert Weisz - -mmc: bcm2835-mmc: enable DT support for all architectures - -Both ARCH_BCM2835 and ARCH_BCM270x are built with OF now. -Enable Device Tree support for all architectures. - -Signed-off-by: Noralf Trønnes - -mmc: bcm2835-mmc: fix probe error handling - -Probe error handling is broken in several places. -Simplify error handling by using device managed functions. -Replace pr_{err,info} with dev_{err,info}. - -Signed-off-by: Noralf Trønnes - -bcm2835-mmc: Add locks when accessing sdhost registers - -bcm2835-mmc: Add range of debug options for slowing things down - -bcm2835-mmc: Add option to disable some delays - -bcm2835-mmc: Add option to disable MMC_QUIRK_BLK_NO_CMD23 - -bcm2835-mmc: Default to disabling MMC_QUIRK_BLK_NO_CMD23 - -bcm2835-mmc: Adding overclocking option - -Allow a different clock speed to be substitued for a requested 50MHz. -This option is exposed using the "overclock_50" DT parameter. -Note that the mmc interface is restricted to EVEN integer divisions of -250MHz, and the highest sensible option is 63 (250/4 = 62.5), the -next being 125 (250/2) which is much too high. - -Use at your own risk. - -bcm2835-mmc: Round up the overclock, so 62 works for 62.5Mhz - -Also only warn once for each overclock setting. - -mmc: bcm2835-mmc: Make available on ARCH_BCM2835 - -Make the bcm2835-mmc driver available for use on ARCH_BCM2835. - -Signed-off-by: Noralf Trønnes - -BCM270x_DT: add bcm2835-mmc entry - -Add Device Tree entry for bcm2835-mmc. -In non-DT mode, don't add the device in the board file. - -Signed-off-by: Noralf Trønnes - -bcm2835-mmc: Don't overwrite MMC capabilities from DT - -bcm2835-mmc: Don't override bus width capabilities from devicetree - -Take out the force setting of the MMC_CAP_4_BIT_DATA host capability -so that the result read from devicetree via mmc_of_parse() is -preserved. - -bcm2835-mmc: Only claim one DMA channel - -With both MMC controllers enabled there are few DMA channels left. The -bcm2835-mmc driver only uses DMA in one direction at a time, so it -doesn't need to claim two channels. - -See: https://github.com/raspberrypi/linux/issues/1327 - -Signed-off-by: Phil Elwell ---- - drivers/mmc/core/quirks.c | 10 + - drivers/mmc/host/Kconfig | 29 + - drivers/mmc/host/Makefile | 1 + - drivers/mmc/host/bcm2835-mmc.c | 1574 ++++++++++++++++++++++++++++++++++++++++ - 4 files changed, 1614 insertions(+) - create mode 100644 drivers/mmc/host/bcm2835-mmc.c - ---- a/drivers/mmc/core/quirks.c -+++ b/drivers/mmc/core/quirks.c -@@ -53,6 +53,9 @@ static const struct mmc_fixup mmc_fixup_ - - void mmc_fixup_device(struct mmc_card *card, const struct mmc_fixup *table) - { -+#ifdef CONFIG_MMC_BCM2835 -+ extern unsigned mmc_debug; -+#endif - const struct mmc_fixup *f; - u64 rev = cid_rev_card(card); - -@@ -79,5 +82,12 @@ void mmc_fixup_device(struct mmc_card *c - f->vendor_fixup(card, f->data); - } - } -+ /* SDHCI on BCM2708 - bug causes a certain sequence of CMD23 operations to fail. -+ * Disable this flag for all cards (fall-back to CMD25/CMD18 multi-block transfers). -+ */ -+#ifdef CONFIG_MMC_BCM2835 -+ if (mmc_debug & (1<<13)) -+ card->quirks |= MMC_QUIRK_BLK_NO_CMD23; -+#endif - } - EXPORT_SYMBOL(mmc_fixup_device); ---- a/drivers/mmc/host/Kconfig -+++ b/drivers/mmc/host/Kconfig -@@ -4,6 +4,35 @@ - - comment "MMC/SD/SDIO Host Controller Drivers" - -+config MMC_BCM2835 -+ tristate "MMC support on BCM2835" -+ depends on MACH_BCM2708 || MACH_BCM2709 || ARCH_BCM2835 -+ help -+ This selects the MMC Interface on BCM2835. -+ -+ If you have a controller with this interface, say Y or M here. -+ -+ If unsure, say N. -+ -+config MMC_BCM2835_DMA -+ bool "DMA support on BCM2835 Arasan controller" -+ depends on MMC_BCM2835 -+ help -+ Enable DMA support on the Arasan SDHCI controller in Broadcom 2708 -+ based chips. -+ -+ If unsure, say N. -+ -+config MMC_BCM2835_PIO_DMA_BARRIER -+ int "Block count limit for PIO transfers" -+ depends on MMC_BCM2835 && MMC_BCM2835_DMA -+ range 0 256 -+ default 2 -+ help -+ The inclusive limit in bytes under which PIO will be used instead of DMA -+ -+ If unsure, say 2 here. -+ - config MMC_ARMMMCI - tristate "ARM AMBA Multimedia Card Interface support" - depends on ARM_AMBA ---- a/drivers/mmc/host/Makefile -+++ b/drivers/mmc/host/Makefile -@@ -18,6 +18,7 @@ obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c - obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o - obj-$(CONFIG_MMC_SDHCI_F_SDH30) += sdhci_f_sdh30.o - obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o -+obj-$(CONFIG_MMC_BCM2835) += bcm2835-mmc.o - obj-$(CONFIG_MMC_WBSD) += wbsd.o - obj-$(CONFIG_MMC_AU1X) += au1xmmc.o - obj-$(CONFIG_MMC_MTK) += mtk-sd.o ---- /dev/null -+++ b/drivers/mmc/host/bcm2835-mmc.c -@@ -0,0 +1,1574 @@ -+/* -+ * BCM2835 MMC host driver. -+ * -+ * Author: Gellert Weisz -+ * Copyright 2014 -+ * -+ * Based on -+ * sdhci-bcm2708.c by Broadcom -+ * sdhci-bcm2835.c by Stephen Warren and Oleksandr Tymoshenko -+ * sdhci.c and sdhci-pci.c by Pierre Ossman -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms and conditions of the GNU General Public License, -+ * version 2, as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "sdhci.h" -+ -+ -+#define DRIVER_NAME "mmc-bcm2835" -+ -+#define DBG(f, x...) \ -+pr_debug(DRIVER_NAME " [%s()]: " f, __func__, ## x) -+ -+#ifndef CONFIG_MMC_BCM2835_DMA -+ #define FORCE_PIO -+#endif -+ -+ -+/* the inclusive limit in bytes under which PIO will be used instead of DMA */ -+#ifdef CONFIG_MMC_BCM2835_PIO_DMA_BARRIER -+#define PIO_DMA_BARRIER CONFIG_MMC_BCM2835_PIO_DMA_BARRIER -+#else -+#define PIO_DMA_BARRIER 00 -+#endif -+ -+#define MIN_FREQ 400000 -+#define TIMEOUT_VAL 0xE -+#define BCM2835_SDHCI_WRITE_DELAY(f) (((2 * 1000000) / f) + 1) -+ -+ -+unsigned mmc_debug; -+unsigned mmc_debug2; -+ -+struct bcm2835_host { -+ spinlock_t lock; -+ -+ void __iomem *ioaddr; -+ u32 bus_addr; -+ -+ struct mmc_host *mmc; -+ -+ u32 timeout; -+ -+ int clock; /* Current clock speed */ -+ u8 pwr; /* Current voltage */ -+ -+ unsigned int max_clk; /* Max possible freq */ -+ unsigned int timeout_clk; /* Timeout freq (KHz) */ -+ unsigned int clk_mul; /* Clock Muliplier value */ -+ -+ struct tasklet_struct finish_tasklet; /* Tasklet structures */ -+ -+ struct timer_list timer; /* Timer for timeouts */ -+ -+ struct sg_mapping_iter sg_miter; /* SG state for PIO */ -+ unsigned int blocks; /* remaining PIO blocks */ -+ -+ int irq; /* Device IRQ */ -+ -+ -+ u32 ier; /* cached registers */ -+ -+ struct mmc_request *mrq; /* Current request */ -+ struct mmc_command *cmd; /* Current command */ -+ struct mmc_data *data; /* Current data request */ -+ unsigned int data_early:1; /* Data finished before cmd */ -+ -+ wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */ -+ -+ u32 thread_isr; -+ -+ u32 shadow; -+ -+ /*DMA part*/ -+ struct dma_chan *dma_chan_rxtx; /* DMA channel for reads and writes */ -+ struct dma_slave_config dma_cfg_rx; -+ struct dma_slave_config dma_cfg_tx; -+ struct dma_async_tx_descriptor *tx_desc; /* descriptor */ -+ -+ bool have_dma; -+ bool use_dma; -+ /*end of DMA part*/ -+ -+ int max_delay; /* maximum length of time spent waiting */ -+ -+ int flags; /* Host attributes */ -+#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ -+#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ -+#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */ -+#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ -+#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ -+ -+ u32 overclock_50; /* frequency to use when 50MHz is requested (in MHz) */ -+ u32 max_overclock; /* Highest reported */ -+}; -+ -+ -+static inline void bcm2835_mmc_writel(struct bcm2835_host *host, u32 val, int reg, int from) -+{ -+ unsigned delay; -+ lockdep_assert_held_once(&host->lock); -+ writel(val, host->ioaddr + reg); -+ udelay(BCM2835_SDHCI_WRITE_DELAY(max(host->clock, MIN_FREQ))); -+ -+ delay = ((mmc_debug >> 16) & 0xf) << ((mmc_debug >> 20) & 0xf); -+ if (delay && !((1<lock); -+ writel(val, host->ioaddr + reg); -+ -+ delay = ((mmc_debug >> 24) & 0xf) << ((mmc_debug >> 28) & 0xf); -+ if (delay) -+ udelay(delay); -+} -+ -+static inline u32 bcm2835_mmc_readl(struct bcm2835_host *host, int reg) -+{ -+ lockdep_assert_held_once(&host->lock); -+ return readl(host->ioaddr + reg); -+} -+ -+static inline void bcm2835_mmc_writew(struct bcm2835_host *host, u16 val, int reg) -+{ -+ u32 oldval = (reg == SDHCI_COMMAND) ? host->shadow : -+ bcm2835_mmc_readl(host, reg & ~3); -+ u32 word_num = (reg >> 1) & 1; -+ u32 word_shift = word_num * 16; -+ u32 mask = 0xffff << word_shift; -+ u32 newval = (oldval & ~mask) | (val << word_shift); -+ -+ if (reg == SDHCI_TRANSFER_MODE) -+ host->shadow = newval; -+ else -+ bcm2835_mmc_writel(host, newval, reg & ~3, 0); -+ -+} -+ -+static inline void bcm2835_mmc_writeb(struct bcm2835_host *host, u8 val, int reg) -+{ -+ u32 oldval = bcm2835_mmc_readl(host, reg & ~3); -+ u32 byte_num = reg & 3; -+ u32 byte_shift = byte_num * 8; -+ u32 mask = 0xff << byte_shift; -+ u32 newval = (oldval & ~mask) | (val << byte_shift); -+ -+ bcm2835_mmc_writel(host, newval, reg & ~3, 1); -+} -+ -+ -+static inline u16 bcm2835_mmc_readw(struct bcm2835_host *host, int reg) -+{ -+ u32 val = bcm2835_mmc_readl(host, (reg & ~3)); -+ u32 word_num = (reg >> 1) & 1; -+ u32 word_shift = word_num * 16; -+ u32 word = (val >> word_shift) & 0xffff; -+ -+ return word; -+} -+ -+static inline u8 bcm2835_mmc_readb(struct bcm2835_host *host, int reg) -+{ -+ u32 val = bcm2835_mmc_readl(host, (reg & ~3)); -+ u32 byte_num = reg & 3; -+ u32 byte_shift = byte_num * 8; -+ u32 byte = (val >> byte_shift) & 0xff; -+ -+ return byte; -+} -+ -+static void bcm2835_mmc_unsignal_irqs(struct bcm2835_host *host, u32 clear) -+{ -+ u32 ier; -+ -+ ier = bcm2835_mmc_readl(host, SDHCI_SIGNAL_ENABLE); -+ ier &= ~clear; -+ /* change which requests generate IRQs - makes no difference to -+ the content of SDHCI_INT_STATUS, or the need to acknowledge IRQs */ -+ bcm2835_mmc_writel(host, ier, SDHCI_SIGNAL_ENABLE, 2); -+} -+ -+ -+static void bcm2835_mmc_dumpregs(struct bcm2835_host *host) -+{ -+ pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n", -+ mmc_hostname(host->mmc)); -+ -+ pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n", -+ bcm2835_mmc_readl(host, SDHCI_DMA_ADDRESS), -+ bcm2835_mmc_readw(host, SDHCI_HOST_VERSION)); -+ pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n", -+ bcm2835_mmc_readw(host, SDHCI_BLOCK_SIZE), -+ bcm2835_mmc_readw(host, SDHCI_BLOCK_COUNT)); -+ pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n", -+ bcm2835_mmc_readl(host, SDHCI_ARGUMENT), -+ bcm2835_mmc_readw(host, SDHCI_TRANSFER_MODE)); -+ pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n", -+ bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE), -+ bcm2835_mmc_readb(host, SDHCI_HOST_CONTROL)); -+ pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n", -+ bcm2835_mmc_readb(host, SDHCI_POWER_CONTROL), -+ bcm2835_mmc_readb(host, SDHCI_BLOCK_GAP_CONTROL)); -+ pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n", -+ bcm2835_mmc_readb(host, SDHCI_WAKE_UP_CONTROL), -+ bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL)); -+ pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n", -+ bcm2835_mmc_readb(host, SDHCI_TIMEOUT_CONTROL), -+ bcm2835_mmc_readl(host, SDHCI_INT_STATUS)); -+ pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n", -+ bcm2835_mmc_readl(host, SDHCI_INT_ENABLE), -+ bcm2835_mmc_readl(host, SDHCI_SIGNAL_ENABLE)); -+ pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n", -+ bcm2835_mmc_readw(host, SDHCI_ACMD12_ERR), -+ bcm2835_mmc_readw(host, SDHCI_SLOT_INT_STATUS)); -+ pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n", -+ bcm2835_mmc_readl(host, SDHCI_CAPABILITIES), -+ bcm2835_mmc_readl(host, SDHCI_CAPABILITIES_1)); -+ pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n", -+ bcm2835_mmc_readw(host, SDHCI_COMMAND), -+ bcm2835_mmc_readl(host, SDHCI_MAX_CURRENT)); -+ pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n", -+ bcm2835_mmc_readw(host, SDHCI_HOST_CONTROL2)); -+ -+ pr_debug(DRIVER_NAME ": ===========================================\n"); -+} -+ -+ -+static void bcm2835_mmc_reset(struct bcm2835_host *host, u8 mask) -+{ -+ unsigned long timeout; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&host->lock, flags); -+ bcm2835_mmc_writeb(host, mask, SDHCI_SOFTWARE_RESET); -+ -+ if (mask & SDHCI_RESET_ALL) -+ host->clock = 0; -+ -+ /* Wait max 100 ms */ -+ timeout = 100; -+ -+ /* hw clears the bit when it's done */ -+ while (bcm2835_mmc_readb(host, SDHCI_SOFTWARE_RESET) & mask) { -+ if (timeout == 0) { -+ pr_err("%s: Reset 0x%x never completed.\n", -+ mmc_hostname(host->mmc), (int)mask); -+ bcm2835_mmc_dumpregs(host); -+ return; -+ } -+ timeout--; -+ spin_unlock_irqrestore(&host->lock, flags); -+ mdelay(1); -+ spin_lock_irqsave(&host->lock, flags); -+ } -+ -+ if (100-timeout > 10 && 100-timeout > host->max_delay) { -+ host->max_delay = 100-timeout; -+ pr_warning("Warning: MMC controller hung for %d ms\n", host->max_delay); -+ } -+ spin_unlock_irqrestore(&host->lock, flags); -+} -+ -+static void bcm2835_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); -+ -+static void bcm2835_mmc_init(struct bcm2835_host *host, int soft) -+{ -+ unsigned long flags; -+ if (soft) -+ bcm2835_mmc_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA); -+ else -+ bcm2835_mmc_reset(host, SDHCI_RESET_ALL); -+ -+ host->ier = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | -+ SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | -+ SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC | -+ SDHCI_INT_TIMEOUT | SDHCI_INT_DATA_END | -+ SDHCI_INT_RESPONSE; -+ -+ spin_lock_irqsave(&host->lock, flags); -+ bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE, 3); -+ bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE, 3); -+ spin_unlock_irqrestore(&host->lock, flags); -+ -+ if (soft) { -+ /* force clock reconfiguration */ -+ host->clock = 0; -+ bcm2835_mmc_set_ios(host->mmc, &host->mmc->ios); -+ } -+} -+ -+ -+ -+static void bcm2835_mmc_finish_data(struct bcm2835_host *host); -+ -+static void bcm2835_mmc_dma_complete(void *param) -+{ -+ struct bcm2835_host *host = param; -+ struct dma_chan *dma_chan; -+ unsigned long flags; -+ u32 dir_data; -+ -+ spin_lock_irqsave(&host->lock, flags); -+ -+ if (host->data && !(host->data->flags & MMC_DATA_WRITE)) { -+ /* otherwise handled in SDHCI IRQ */ -+ dma_chan = host->dma_chan_rxtx; -+ dir_data = DMA_FROM_DEVICE; -+ -+ dma_unmap_sg(dma_chan->device->dev, -+ host->data->sg, host->data->sg_len, -+ dir_data); -+ -+ bcm2835_mmc_finish_data(host); -+ } -+ -+ spin_unlock_irqrestore(&host->lock, flags); -+} -+ -+static void bcm2835_bcm2835_mmc_read_block_pio(struct bcm2835_host *host) -+{ -+ unsigned long flags; -+ size_t blksize, len, chunk; -+ -+ u32 uninitialized_var(scratch); -+ u8 *buf; -+ -+ blksize = host->data->blksz; -+ chunk = 0; -+ -+ local_irq_save(flags); -+ -+ while (blksize) { -+ if (!sg_miter_next(&host->sg_miter)) -+ BUG(); -+ -+ len = min(host->sg_miter.length, blksize); -+ -+ blksize -= len; -+ host->sg_miter.consumed = len; -+ -+ buf = host->sg_miter.addr; -+ -+ while (len) { -+ if (chunk == 0) { -+ scratch = bcm2835_mmc_readl(host, SDHCI_BUFFER); -+ chunk = 4; -+ } -+ -+ *buf = scratch & 0xFF; -+ -+ buf++; -+ scratch >>= 8; -+ chunk--; -+ len--; -+ } -+ } -+ -+ sg_miter_stop(&host->sg_miter); -+ -+ local_irq_restore(flags); -+} -+ -+static void bcm2835_bcm2835_mmc_write_block_pio(struct bcm2835_host *host) -+{ -+ unsigned long flags; -+ size_t blksize, len, chunk; -+ u32 scratch; -+ u8 *buf; -+ -+ blksize = host->data->blksz; -+ chunk = 0; -+ chunk = 0; -+ scratch = 0; -+ -+ local_irq_save(flags); -+ -+ while (blksize) { -+ if (!sg_miter_next(&host->sg_miter)) -+ BUG(); -+ -+ len = min(host->sg_miter.length, blksize); -+ -+ blksize -= len; -+ host->sg_miter.consumed = len; -+ -+ buf = host->sg_miter.addr; -+ -+ while (len) { -+ scratch |= (u32)*buf << (chunk * 8); -+ -+ buf++; -+ chunk++; -+ len--; -+ -+ if ((chunk == 4) || ((len == 0) && (blksize == 0))) { -+ mmc_raw_writel(host, scratch, SDHCI_BUFFER); -+ chunk = 0; -+ scratch = 0; -+ } -+ } -+ } -+ -+ sg_miter_stop(&host->sg_miter); -+ -+ local_irq_restore(flags); -+} -+ -+ -+static void bcm2835_mmc_transfer_pio(struct bcm2835_host *host) -+{ -+ u32 mask; -+ -+ BUG_ON(!host->data); -+ -+ if (host->blocks == 0) -+ return; -+ -+ if (host->data->flags & MMC_DATA_READ) -+ mask = SDHCI_DATA_AVAILABLE; -+ else -+ mask = SDHCI_SPACE_AVAILABLE; -+ -+ while (bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE) & mask) { -+ -+ if (host->data->flags & MMC_DATA_READ) -+ bcm2835_bcm2835_mmc_read_block_pio(host); -+ else -+ bcm2835_bcm2835_mmc_write_block_pio(host); -+ -+ host->blocks--; -+ -+ /* QUIRK used in sdhci.c removes the 'if' */ -+ /* but it seems this is unnecessary */ -+ if (host->blocks == 0) -+ break; -+ -+ -+ } -+} -+ -+ -+static void bcm2835_mmc_transfer_dma(struct bcm2835_host *host) -+{ -+ u32 len, dir_data, dir_slave; -+ struct dma_async_tx_descriptor *desc = NULL; -+ struct dma_chan *dma_chan; -+ -+ -+ WARN_ON(!host->data); -+ -+ if (!host->data) -+ return; -+ -+ if (host->blocks == 0) -+ return; -+ -+ dma_chan = host->dma_chan_rxtx; -+ if (host->data->flags & MMC_DATA_READ) { -+ dir_data = DMA_FROM_DEVICE; -+ dir_slave = DMA_DEV_TO_MEM; -+ } else { -+ dir_data = DMA_TO_DEVICE; -+ dir_slave = DMA_MEM_TO_DEV; -+ } -+ -+ /* The parameters have already been validated, so this will not fail */ -+ (void)dmaengine_slave_config(dma_chan, -+ (dir_data == DMA_FROM_DEVICE) ? -+ &host->dma_cfg_rx : -+ &host->dma_cfg_tx); -+ -+ BUG_ON(!dma_chan->device); -+ BUG_ON(!dma_chan->device->dev); -+ BUG_ON(!host->data->sg); -+ -+ len = dma_map_sg(dma_chan->device->dev, host->data->sg, -+ host->data->sg_len, dir_data); -+ if (len > 0) { -+ desc = dmaengine_prep_slave_sg(dma_chan, host->data->sg, -+ len, dir_slave, -+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK); -+ } else { -+ dev_err(mmc_dev(host->mmc), "dma_map_sg returned zero length\n"); -+ } -+ if (desc) { -+ unsigned long flags; -+ spin_lock_irqsave(&host->lock, flags); -+ bcm2835_mmc_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL | -+ SDHCI_INT_SPACE_AVAIL); -+ host->tx_desc = desc; -+ desc->callback = bcm2835_mmc_dma_complete; -+ desc->callback_param = host; -+ spin_unlock_irqrestore(&host->lock, flags); -+ dmaengine_submit(desc); -+ dma_async_issue_pending(dma_chan); -+ } -+ -+} -+ -+ -+ -+static void bcm2835_mmc_set_transfer_irqs(struct bcm2835_host *host) -+{ -+ u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL; -+ u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR; -+ -+ if (host->use_dma) -+ host->ier = (host->ier & ~pio_irqs) | dma_irqs; -+ else -+ host->ier = (host->ier & ~dma_irqs) | pio_irqs; -+ -+ bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE, 4); -+ bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE, 4); -+} -+ -+ -+static void bcm2835_mmc_prepare_data(struct bcm2835_host *host, struct mmc_command *cmd) -+{ -+ u8 count; -+ struct mmc_data *data = cmd->data; -+ -+ WARN_ON(host->data); -+ -+ if (data || (cmd->flags & MMC_RSP_BUSY)) { -+ count = TIMEOUT_VAL; -+ bcm2835_mmc_writeb(host, count, SDHCI_TIMEOUT_CONTROL); -+ } -+ -+ if (!data) -+ return; -+ -+ /* Sanity checks */ -+ BUG_ON(data->blksz * data->blocks > 524288); -+ BUG_ON(data->blksz > host->mmc->max_blk_size); -+ BUG_ON(data->blocks > 65535); -+ -+ host->data = data; -+ host->data_early = 0; -+ host->data->bytes_xfered = 0; -+ -+ -+ if (!(host->flags & SDHCI_REQ_USE_DMA)) { -+ int flags; -+ -+ flags = SG_MITER_ATOMIC; -+ if (host->data->flags & MMC_DATA_READ) -+ flags |= SG_MITER_TO_SG; -+ else -+ flags |= SG_MITER_FROM_SG; -+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); -+ host->blocks = data->blocks; -+ } -+ -+ host->use_dma = host->have_dma && data->blocks > PIO_DMA_BARRIER; -+ -+ bcm2835_mmc_set_transfer_irqs(host); -+ -+ /* Set the DMA boundary value and block size */ -+ bcm2835_mmc_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG, -+ data->blksz), SDHCI_BLOCK_SIZE); -+ bcm2835_mmc_writew(host, data->blocks, SDHCI_BLOCK_COUNT); -+ -+ BUG_ON(!host->data); -+} -+ -+static void bcm2835_mmc_set_transfer_mode(struct bcm2835_host *host, -+ struct mmc_command *cmd) -+{ -+ u16 mode; -+ struct mmc_data *data = cmd->data; -+ -+ if (data == NULL) { -+ /* clear Auto CMD settings for no data CMDs */ -+ mode = bcm2835_mmc_readw(host, SDHCI_TRANSFER_MODE); -+ bcm2835_mmc_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 | -+ SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE); -+ return; -+ } -+ -+ WARN_ON(!host->data); -+ -+ mode = SDHCI_TRNS_BLK_CNT_EN; -+ -+ if ((mmc_op_multi(cmd->opcode) || data->blocks > 1)) { -+ mode |= SDHCI_TRNS_MULTI; -+ -+ /* -+ * If we are sending CMD23, CMD12 never gets sent -+ * on successful completion (so no Auto-CMD12). -+ */ -+ if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) -+ mode |= SDHCI_TRNS_AUTO_CMD12; -+ else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) { -+ mode |= SDHCI_TRNS_AUTO_CMD23; -+ bcm2835_mmc_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2, 5); -+ } -+ } -+ -+ if (data->flags & MMC_DATA_READ) -+ mode |= SDHCI_TRNS_READ; -+ if (host->flags & SDHCI_REQ_USE_DMA) -+ mode |= SDHCI_TRNS_DMA; -+ -+ bcm2835_mmc_writew(host, mode, SDHCI_TRANSFER_MODE); -+} -+ -+void bcm2835_mmc_send_command(struct bcm2835_host *host, struct mmc_command *cmd) -+{ -+ int flags; -+ u32 mask; -+ unsigned long timeout; -+ -+ WARN_ON(host->cmd); -+ -+ /* Wait max 10 ms */ -+ timeout = 1000; -+ -+ mask = SDHCI_CMD_INHIBIT; -+ if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY)) -+ mask |= SDHCI_DATA_INHIBIT; -+ -+ /* We shouldn't wait for data inihibit for stop commands, even -+ though they might use busy signaling */ -+ if (host->mrq->data && (cmd == host->mrq->data->stop)) -+ mask &= ~SDHCI_DATA_INHIBIT; -+ -+ while (bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE) & mask) { -+ if (timeout == 0) { -+ pr_err("%s: Controller never released inhibit bit(s).\n", -+ mmc_hostname(host->mmc)); -+ bcm2835_mmc_dumpregs(host); -+ cmd->error = -EIO; -+ tasklet_schedule(&host->finish_tasklet); -+ return; -+ } -+ timeout--; -+ udelay(10); -+ } -+ -+ if ((1000-timeout)/100 > 1 && (1000-timeout)/100 > host->max_delay) { -+ host->max_delay = (1000-timeout)/100; -+ pr_warning("Warning: MMC controller hung for %d ms\n", host->max_delay); -+ } -+ -+ timeout = jiffies; -+ if (!cmd->data && cmd->busy_timeout > 9000) -+ timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; -+ else -+ timeout += 10 * HZ; -+ mod_timer(&host->timer, timeout); -+ -+ host->cmd = cmd; -+ -+ bcm2835_mmc_prepare_data(host, cmd); -+ -+ bcm2835_mmc_writel(host, cmd->arg, SDHCI_ARGUMENT, 6); -+ -+ bcm2835_mmc_set_transfer_mode(host, cmd); -+ -+ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { -+ pr_err("%s: Unsupported response type!\n", -+ mmc_hostname(host->mmc)); -+ cmd->error = -EINVAL; -+ tasklet_schedule(&host->finish_tasklet); -+ return; -+ } -+ -+ if (!(cmd->flags & MMC_RSP_PRESENT)) -+ flags = SDHCI_CMD_RESP_NONE; -+ else if (cmd->flags & MMC_RSP_136) -+ flags = SDHCI_CMD_RESP_LONG; -+ else if (cmd->flags & MMC_RSP_BUSY) -+ flags = SDHCI_CMD_RESP_SHORT_BUSY; -+ else -+ flags = SDHCI_CMD_RESP_SHORT; -+ -+ if (cmd->flags & MMC_RSP_CRC) -+ flags |= SDHCI_CMD_CRC; -+ if (cmd->flags & MMC_RSP_OPCODE) -+ flags |= SDHCI_CMD_INDEX; -+ -+ if (cmd->data) -+ flags |= SDHCI_CMD_DATA; -+ -+ bcm2835_mmc_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND); -+} -+ -+ -+static void bcm2835_mmc_finish_data(struct bcm2835_host *host) -+{ -+ struct mmc_data *data; -+ -+ BUG_ON(!host->data); -+ -+ data = host->data; -+ host->data = NULL; -+ -+ if (data->error) -+ data->bytes_xfered = 0; -+ else -+ data->bytes_xfered = data->blksz * data->blocks; -+ -+ /* -+ * Need to send CMD12 if - -+ * a) open-ended multiblock transfer (no CMD23) -+ * b) error in multiblock transfer -+ */ -+ if (data->stop && -+ (data->error || -+ !host->mrq->sbc)) { -+ -+ /* -+ * The controller needs a reset of internal state machines -+ * upon error conditions. -+ */ -+ if (data->error) { -+ bcm2835_mmc_reset(host, SDHCI_RESET_CMD); -+ bcm2835_mmc_reset(host, SDHCI_RESET_DATA); -+ } -+ -+ bcm2835_mmc_send_command(host, data->stop); -+ } else -+ tasklet_schedule(&host->finish_tasklet); -+} -+ -+static void bcm2835_mmc_finish_command(struct bcm2835_host *host) -+{ -+ int i; -+ -+ BUG_ON(host->cmd == NULL); -+ -+ if (host->cmd->flags & MMC_RSP_PRESENT) { -+ if (host->cmd->flags & MMC_RSP_136) { -+ /* CRC is stripped so we need to do some shifting. */ -+ for (i = 0; i < 4; i++) { -+ host->cmd->resp[i] = bcm2835_mmc_readl(host, -+ SDHCI_RESPONSE + (3-i)*4) << 8; -+ if (i != 3) -+ host->cmd->resp[i] |= -+ bcm2835_mmc_readb(host, -+ SDHCI_RESPONSE + (3-i)*4-1); -+ } -+ } else { -+ host->cmd->resp[0] = bcm2835_mmc_readl(host, SDHCI_RESPONSE); -+ } -+ } -+ -+ host->cmd->error = 0; -+ -+ /* Finished CMD23, now send actual command. */ -+ if (host->cmd == host->mrq->sbc) { -+ host->cmd = NULL; -+ bcm2835_mmc_send_command(host, host->mrq->cmd); -+ -+ if (host->mrq->cmd->data && host->use_dma) { -+ /* DMA transfer starts now, PIO starts after interrupt */ -+ bcm2835_mmc_transfer_dma(host); -+ } -+ } else { -+ -+ /* Processed actual command. */ -+ if (host->data && host->data_early) -+ bcm2835_mmc_finish_data(host); -+ -+ if (!host->cmd->data) -+ tasklet_schedule(&host->finish_tasklet); -+ -+ host->cmd = NULL; -+ } -+} -+ -+ -+static void bcm2835_mmc_timeout_timer(unsigned long data) -+{ -+ struct bcm2835_host *host; -+ unsigned long flags; -+ -+ host = (struct bcm2835_host *)data; -+ -+ spin_lock_irqsave(&host->lock, flags); -+ -+ if (host->mrq) { -+ pr_err("%s: Timeout waiting for hardware interrupt.\n", -+ mmc_hostname(host->mmc)); -+ bcm2835_mmc_dumpregs(host); -+ -+ if (host->data) { -+ host->data->error = -ETIMEDOUT; -+ bcm2835_mmc_finish_data(host); -+ } else { -+ if (host->cmd) -+ host->cmd->error = -ETIMEDOUT; -+ else -+ host->mrq->cmd->error = -ETIMEDOUT; -+ -+ tasklet_schedule(&host->finish_tasklet); -+ } -+ } -+ -+ mmiowb(); -+ spin_unlock_irqrestore(&host->lock, flags); -+} -+ -+ -+static void bcm2835_mmc_enable_sdio_irq_nolock(struct bcm2835_host *host, int enable) -+{ -+ if (!(host->flags & SDHCI_DEVICE_DEAD)) { -+ if (enable) -+ host->ier |= SDHCI_INT_CARD_INT; -+ else -+ host->ier &= ~SDHCI_INT_CARD_INT; -+ -+ bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE, 7); -+ bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE, 7); -+ mmiowb(); -+ } -+} -+ -+static void bcm2835_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) -+{ -+ struct bcm2835_host *host = mmc_priv(mmc); -+ unsigned long flags; -+ -+ spin_lock_irqsave(&host->lock, flags); -+ if (enable) -+ host->flags |= SDHCI_SDIO_IRQ_ENABLED; -+ else -+ host->flags &= ~SDHCI_SDIO_IRQ_ENABLED; -+ -+ bcm2835_mmc_enable_sdio_irq_nolock(host, enable); -+ spin_unlock_irqrestore(&host->lock, flags); -+} -+ -+static void bcm2835_mmc_cmd_irq(struct bcm2835_host *host, u32 intmask) -+{ -+ -+ BUG_ON(intmask == 0); -+ -+ if (!host->cmd) { -+ pr_err("%s: Got command interrupt 0x%08x even " -+ "though no command operation was in progress.\n", -+ mmc_hostname(host->mmc), (unsigned)intmask); -+ bcm2835_mmc_dumpregs(host); -+ return; -+ } -+ -+ if (intmask & SDHCI_INT_TIMEOUT) -+ host->cmd->error = -ETIMEDOUT; -+ else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT | -+ SDHCI_INT_INDEX)) { -+ host->cmd->error = -EILSEQ; -+ } -+ -+ if (host->cmd->error) { -+ tasklet_schedule(&host->finish_tasklet); -+ return; -+ } -+ -+ if (intmask & SDHCI_INT_RESPONSE) -+ bcm2835_mmc_finish_command(host); -+ -+} -+ -+static void bcm2835_mmc_data_irq(struct bcm2835_host *host, u32 intmask) -+{ -+ struct dma_chan *dma_chan; -+ u32 dir_data; -+ -+ BUG_ON(intmask == 0); -+ -+ if (!host->data) { -+ /* -+ * The "data complete" interrupt is also used to -+ * indicate that a busy state has ended. See comment -+ * above in sdhci_cmd_irq(). -+ */ -+ if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) { -+ if (intmask & SDHCI_INT_DATA_END) { -+ bcm2835_mmc_finish_command(host); -+ return; -+ } -+ } -+ -+ pr_debug("%s: Got data interrupt 0x%08x even " -+ "though no data operation was in progress.\n", -+ mmc_hostname(host->mmc), (unsigned)intmask); -+ bcm2835_mmc_dumpregs(host); -+ -+ return; -+ } -+ -+ if (intmask & SDHCI_INT_DATA_TIMEOUT) -+ host->data->error = -ETIMEDOUT; -+ else if (intmask & SDHCI_INT_DATA_END_BIT) -+ host->data->error = -EILSEQ; -+ else if ((intmask & SDHCI_INT_DATA_CRC) && -+ SDHCI_GET_CMD(bcm2835_mmc_readw(host, SDHCI_COMMAND)) -+ != MMC_BUS_TEST_R) -+ host->data->error = -EILSEQ; -+ -+ if (host->use_dma) { -+ if (host->data->flags & MMC_DATA_WRITE) { -+ /* IRQ handled here */ -+ -+ dma_chan = host->dma_chan_rxtx; -+ dir_data = DMA_TO_DEVICE; -+ dma_unmap_sg(dma_chan->device->dev, -+ host->data->sg, host->data->sg_len, -+ dir_data); -+ -+ bcm2835_mmc_finish_data(host); -+ } -+ -+ } else { -+ if (host->data->error) -+ bcm2835_mmc_finish_data(host); -+ else { -+ if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL)) -+ bcm2835_mmc_transfer_pio(host); -+ -+ if (intmask & SDHCI_INT_DATA_END) { -+ if (host->cmd) { -+ /* -+ * Data managed to finish before the -+ * command completed. Make sure we do -+ * things in the proper order. -+ */ -+ host->data_early = 1; -+ } else { -+ bcm2835_mmc_finish_data(host); -+ } -+ } -+ } -+ } -+} -+ -+ -+static irqreturn_t bcm2835_mmc_irq(int irq, void *dev_id) -+{ -+ irqreturn_t result = IRQ_NONE; -+ struct bcm2835_host *host = dev_id; -+ u32 intmask, mask, unexpected = 0; -+ int max_loops = 16; -+ -+ spin_lock(&host->lock); -+ -+ intmask = bcm2835_mmc_readl(host, SDHCI_INT_STATUS); -+ -+ if (!intmask || intmask == 0xffffffff) { -+ result = IRQ_NONE; -+ goto out; -+ } -+ -+ do { -+ /* Clear selected interrupts. */ -+ mask = intmask & (SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK | -+ SDHCI_INT_BUS_POWER); -+ bcm2835_mmc_writel(host, mask, SDHCI_INT_STATUS, 8); -+ -+ -+ if (intmask & SDHCI_INT_CMD_MASK) -+ bcm2835_mmc_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK); -+ -+ if (intmask & SDHCI_INT_DATA_MASK) -+ bcm2835_mmc_data_irq(host, intmask & SDHCI_INT_DATA_MASK); -+ -+ if (intmask & SDHCI_INT_BUS_POWER) -+ pr_err("%s: Card is consuming too much power!\n", -+ mmc_hostname(host->mmc)); -+ -+ if (intmask & SDHCI_INT_CARD_INT) { -+ bcm2835_mmc_enable_sdio_irq_nolock(host, false); -+ host->thread_isr |= SDHCI_INT_CARD_INT; -+ result = IRQ_WAKE_THREAD; -+ } -+ -+ intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE | -+ SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK | -+ SDHCI_INT_ERROR | SDHCI_INT_BUS_POWER | -+ SDHCI_INT_CARD_INT); -+ -+ if (intmask) { -+ unexpected |= intmask; -+ bcm2835_mmc_writel(host, intmask, SDHCI_INT_STATUS, 9); -+ } -+ -+ if (result == IRQ_NONE) -+ result = IRQ_HANDLED; -+ -+ intmask = bcm2835_mmc_readl(host, SDHCI_INT_STATUS); -+ } while (intmask && --max_loops); -+out: -+ spin_unlock(&host->lock); -+ -+ if (unexpected) { -+ pr_err("%s: Unexpected interrupt 0x%08x.\n", -+ mmc_hostname(host->mmc), unexpected); -+ bcm2835_mmc_dumpregs(host); -+ } -+ -+ return result; -+} -+ -+static irqreturn_t bcm2835_mmc_thread_irq(int irq, void *dev_id) -+{ -+ struct bcm2835_host *host = dev_id; -+ unsigned long flags; -+ u32 isr; -+ -+ spin_lock_irqsave(&host->lock, flags); -+ isr = host->thread_isr; -+ host->thread_isr = 0; -+ spin_unlock_irqrestore(&host->lock, flags); -+ -+ if (isr & SDHCI_INT_CARD_INT) { -+ sdio_run_irqs(host->mmc); -+ -+ spin_lock_irqsave(&host->lock, flags); -+ if (host->flags & SDHCI_SDIO_IRQ_ENABLED) -+ bcm2835_mmc_enable_sdio_irq_nolock(host, true); -+ spin_unlock_irqrestore(&host->lock, flags); -+ } -+ -+ return isr ? IRQ_HANDLED : IRQ_NONE; -+} -+ -+ -+ -+void bcm2835_mmc_set_clock(struct bcm2835_host *host, unsigned int clock) -+{ -+ int div = 0; /* Initialized for compiler warning */ -+ int real_div = div, clk_mul = 1; -+ u16 clk = 0; -+ unsigned long timeout; -+ unsigned int input_clock = clock; -+ -+ if (host->overclock_50 && (clock == 50000000)) -+ clock = host->overclock_50 * 1000000 + 999999; -+ -+ host->mmc->actual_clock = 0; -+ -+ bcm2835_mmc_writew(host, 0, SDHCI_CLOCK_CONTROL); -+ -+ if (clock == 0) -+ return; -+ -+ /* Version 3.00 divisors must be a multiple of 2. */ -+ if (host->max_clk <= clock) -+ div = 1; -+ else { -+ for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; -+ div += 2) { -+ if ((host->max_clk / div) <= clock) -+ break; -+ } -+ } -+ -+ real_div = div; -+ div >>= 1; -+ -+ if (real_div) -+ clock = (host->max_clk * clk_mul) / real_div; -+ host->mmc->actual_clock = clock; -+ -+ if ((clock > input_clock) && (clock > host->max_overclock)) { -+ pr_warn("%s: Overclocking to %dHz\n", -+ mmc_hostname(host->mmc), clock); -+ host->max_overclock = clock; -+ } -+ -+ clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT; -+ clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN) -+ << SDHCI_DIVIDER_HI_SHIFT; -+ clk |= SDHCI_CLOCK_INT_EN; -+ bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL); -+ -+ /* Wait max 20 ms */ -+ timeout = 20; -+ while (!((clk = bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL)) -+ & SDHCI_CLOCK_INT_STABLE)) { -+ if (timeout == 0) { -+ pr_err("%s: Internal clock never " -+ "stabilised.\n", mmc_hostname(host->mmc)); -+ bcm2835_mmc_dumpregs(host); -+ return; -+ } -+ timeout--; -+ mdelay(1); -+ } -+ -+ if (20-timeout > 10 && 20-timeout > host->max_delay) { -+ host->max_delay = 20-timeout; -+ pr_warning("Warning: MMC controller hung for %d ms\n", host->max_delay); -+ } -+ -+ clk |= SDHCI_CLOCK_CARD_EN; -+ bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL); -+} -+ -+static void bcm2835_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) -+{ -+ struct bcm2835_host *host; -+ unsigned long flags; -+ -+ host = mmc_priv(mmc); -+ -+ spin_lock_irqsave(&host->lock, flags); -+ -+ WARN_ON(host->mrq != NULL); -+ -+ host->mrq = mrq; -+ -+ if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) -+ bcm2835_mmc_send_command(host, mrq->sbc); -+ else -+ bcm2835_mmc_send_command(host, mrq->cmd); -+ -+ mmiowb(); -+ spin_unlock_irqrestore(&host->lock, flags); -+ -+ if (!(mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) && mrq->cmd->data && host->use_dma) { -+ /* DMA transfer starts now, PIO starts after interrupt */ -+ bcm2835_mmc_transfer_dma(host); -+ } -+} -+ -+ -+static void bcm2835_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) -+{ -+ -+ struct bcm2835_host *host = mmc_priv(mmc); -+ unsigned long flags; -+ u8 ctrl; -+ u16 clk, ctrl_2; -+ -+ pr_debug("bcm2835_mmc_set_ios: clock %d, pwr %d, bus_width %d, timing %d, vdd %d, drv_type %d\n", -+ ios->clock, ios->power_mode, ios->bus_width, -+ ios->timing, ios->signal_voltage, ios->drv_type); -+ -+ spin_lock_irqsave(&host->lock, flags); -+ -+ if (!ios->clock || ios->clock != host->clock) { -+ bcm2835_mmc_set_clock(host, ios->clock); -+ host->clock = ios->clock; -+ } -+ -+ if (host->pwr != SDHCI_POWER_330) { -+ host->pwr = SDHCI_POWER_330; -+ bcm2835_mmc_writeb(host, SDHCI_POWER_330 | SDHCI_POWER_ON, SDHCI_POWER_CONTROL); -+ } -+ -+ ctrl = bcm2835_mmc_readb(host, SDHCI_HOST_CONTROL); -+ -+ /* set bus width */ -+ ctrl &= ~SDHCI_CTRL_8BITBUS; -+ if (ios->bus_width == MMC_BUS_WIDTH_4) -+ ctrl |= SDHCI_CTRL_4BITBUS; -+ else -+ ctrl &= ~SDHCI_CTRL_4BITBUS; -+ -+ ctrl &= ~SDHCI_CTRL_HISPD; /* NO_HISPD_BIT */ -+ -+ -+ bcm2835_mmc_writeb(host, ctrl, SDHCI_HOST_CONTROL); -+ /* -+ * We only need to set Driver Strength if the -+ * preset value enable is not set. -+ */ -+ ctrl_2 = bcm2835_mmc_readw(host, SDHCI_HOST_CONTROL2); -+ ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK; -+ if (ios->drv_type == MMC_SET_DRIVER_TYPE_A) -+ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A; -+ else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C) -+ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C; -+ -+ bcm2835_mmc_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); -+ -+ /* Reset SD Clock Enable */ -+ clk = bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL); -+ clk &= ~SDHCI_CLOCK_CARD_EN; -+ bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL); -+ -+ /* Re-enable SD Clock */ -+ bcm2835_mmc_set_clock(host, host->clock); -+ bcm2835_mmc_writeb(host, ctrl, SDHCI_HOST_CONTROL); -+ -+ mmiowb(); -+ -+ spin_unlock_irqrestore(&host->lock, flags); -+} -+ -+ -+static struct mmc_host_ops bcm2835_ops = { -+ .request = bcm2835_mmc_request, -+ .set_ios = bcm2835_mmc_set_ios, -+ .enable_sdio_irq = bcm2835_mmc_enable_sdio_irq, -+}; -+ -+ -+static void bcm2835_mmc_tasklet_finish(unsigned long param) -+{ -+ struct bcm2835_host *host; -+ unsigned long flags; -+ struct mmc_request *mrq; -+ -+ host = (struct bcm2835_host *)param; -+ -+ spin_lock_irqsave(&host->lock, flags); -+ -+ /* -+ * If this tasklet gets rescheduled while running, it will -+ * be run again afterwards but without any active request. -+ */ -+ if (!host->mrq) { -+ spin_unlock_irqrestore(&host->lock, flags); -+ return; -+ } -+ -+ del_timer(&host->timer); -+ -+ mrq = host->mrq; -+ -+ /* -+ * The controller needs a reset of internal state machines -+ * upon error conditions. -+ */ -+ if (!(host->flags & SDHCI_DEVICE_DEAD) && -+ ((mrq->cmd && mrq->cmd->error) || -+ (mrq->data && (mrq->data->error || -+ (mrq->data->stop && mrq->data->stop->error))))) { -+ -+ spin_unlock_irqrestore(&host->lock, flags); -+ bcm2835_mmc_reset(host, SDHCI_RESET_CMD); -+ bcm2835_mmc_reset(host, SDHCI_RESET_DATA); -+ spin_lock_irqsave(&host->lock, flags); -+ } -+ -+ host->mrq = NULL; -+ host->cmd = NULL; -+ host->data = NULL; -+ -+ mmiowb(); -+ -+ spin_unlock_irqrestore(&host->lock, flags); -+ mmc_request_done(host->mmc, mrq); -+} -+ -+ -+ -+static int bcm2835_mmc_add_host(struct bcm2835_host *host) -+{ -+ struct mmc_host *mmc = host->mmc; -+ struct device *dev = mmc->parent; -+#ifndef FORCE_PIO -+ struct dma_slave_config cfg; -+#endif -+ int ret; -+ -+ bcm2835_mmc_reset(host, SDHCI_RESET_ALL); -+ -+ host->clk_mul = 0; -+ -+ mmc->f_max = host->max_clk; -+ mmc->f_max = host->max_clk; -+ mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300; -+ -+ /* SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK */ -+ host->timeout_clk = mmc->f_max / 1000; -+ mmc->max_busy_timeout = (1 << 27) / host->timeout_clk; -+ -+ /* host controller capabilities */ -+ mmc->caps |= MMC_CAP_CMD23 | MMC_CAP_ERASE | MMC_CAP_NEEDS_POLL | -+ MMC_CAP_SDIO_IRQ | MMC_CAP_SD_HIGHSPEED | -+ MMC_CAP_MMC_HIGHSPEED; -+ -+ mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD; -+ -+ host->flags = SDHCI_AUTO_CMD23; -+ -+ dev_info(dev, "mmc_debug:%x mmc_debug2:%x\n", mmc_debug, mmc_debug2); -+#ifdef FORCE_PIO -+ dev_info(dev, "Forcing PIO mode\n"); -+ host->have_dma = false; -+#else -+ if (IS_ERR_OR_NULL(host->dma_chan_rxtx)) { -+ dev_err(dev, "%s: Unable to initialise DMA channel. Falling back to PIO\n", -+ DRIVER_NAME); -+ host->have_dma = false; -+ } else { -+ dev_info(dev, "DMA channel allocated"); -+ -+ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; -+ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; -+ cfg.slave_id = 11; /* DREQ channel */ -+ -+ /* Validate the slave configurations */ -+ -+ cfg.direction = DMA_MEM_TO_DEV; -+ cfg.src_addr = 0; -+ cfg.dst_addr = host->bus_addr + SDHCI_BUFFER; -+ -+ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); -+ -+ if (ret == 0) { -+ host->dma_cfg_tx = cfg; -+ -+ cfg.direction = DMA_DEV_TO_MEM; -+ cfg.src_addr = host->bus_addr + SDHCI_BUFFER; -+ cfg.dst_addr = 0; -+ -+ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); -+ } -+ -+ if (ret == 0) { -+ host->dma_cfg_rx = cfg; -+ -+ host->use_dma = true; -+ } else { -+ pr_err("%s: unable to configure DMA channel. " -+ "Faling back to PIO\n", -+ mmc_hostname(mmc)); -+ dma_release_channel(host->dma_chan_rxtx); -+ host->dma_chan_rxtx = NULL; -+ host->use_dma = false; -+ } -+ } -+#endif -+ mmc->max_segs = 128; -+ mmc->max_req_size = 524288; -+ mmc->max_seg_size = mmc->max_req_size; -+ mmc->max_blk_size = 512; -+ mmc->max_blk_count = 65535; -+ -+ /* report supported voltage ranges */ -+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; -+ -+ tasklet_init(&host->finish_tasklet, -+ bcm2835_mmc_tasklet_finish, (unsigned long)host); -+ -+ setup_timer(&host->timer, bcm2835_mmc_timeout_timer, (unsigned long)host); -+ init_waitqueue_head(&host->buf_ready_int); -+ -+ bcm2835_mmc_init(host, 0); -+ ret = devm_request_threaded_irq(dev, host->irq, bcm2835_mmc_irq, -+ bcm2835_mmc_thread_irq, IRQF_SHARED, -+ mmc_hostname(mmc), host); -+ if (ret) { -+ dev_err(dev, "Failed to request IRQ %d: %d\n", host->irq, ret); -+ goto untasklet; -+ } -+ -+ mmiowb(); -+ mmc_add_host(mmc); -+ -+ return 0; -+ -+untasklet: -+ tasklet_kill(&host->finish_tasklet); -+ -+ return ret; -+} -+ -+static int bcm2835_mmc_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct device_node *node = dev->of_node; -+ struct clk *clk; -+ struct resource *iomem; -+ struct bcm2835_host *host; -+ struct mmc_host *mmc; -+ const __be32 *addr; -+ int ret; -+ -+ mmc = mmc_alloc_host(sizeof(*host), dev); -+ if (!mmc) -+ return -ENOMEM; -+ -+ mmc->ops = &bcm2835_ops; -+ host = mmc_priv(mmc); -+ host->mmc = mmc; -+ host->timeout = msecs_to_jiffies(1000); -+ spin_lock_init(&host->lock); -+ -+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ host->ioaddr = devm_ioremap_resource(dev, iomem); -+ if (IS_ERR(host->ioaddr)) { -+ ret = PTR_ERR(host->ioaddr); -+ goto err; -+ } -+ -+ addr = of_get_address(node, 0, NULL, NULL); -+ if (!addr) { -+ dev_err(dev, "could not get DMA-register address\n"); -+ return -ENODEV; -+ } -+ host->bus_addr = be32_to_cpup(addr); -+ pr_debug(" - ioaddr %lx, iomem->start %lx, bus_addr %lx\n", -+ (unsigned long)host->ioaddr, -+ (unsigned long)iomem->start, -+ (unsigned long)host->bus_addr); -+ -+#ifndef FORCE_PIO -+ if (node) { -+ host->dma_chan_rxtx = dma_request_slave_channel(dev, "rx-tx"); -+ if (!host->dma_chan_rxtx) -+ host->dma_chan_rxtx = -+ dma_request_slave_channel(dev, "tx"); -+ if (!host->dma_chan_rxtx) -+ host->dma_chan_rxtx = -+ dma_request_slave_channel(dev, "rx"); -+ } else { -+ dma_cap_mask_t mask; -+ -+ dma_cap_zero(mask); -+ /* we don't care about the channel, any would work */ -+ dma_cap_set(DMA_SLAVE, mask); -+ host->dma_chan_rxtx = dma_request_channel(mask, NULL, NULL); -+ } -+#endif -+ clk = devm_clk_get(dev, NULL); -+ if (IS_ERR(clk)) { -+ ret = PTR_ERR(clk); -+ if (ret == -EPROBE_DEFER) -+ dev_info(dev, "could not get clk, deferring probe\n"); -+ else -+ dev_err(dev, "could not get clk\n"); -+ goto err; -+ } -+ -+ host->max_clk = clk_get_rate(clk); -+ -+ host->irq = platform_get_irq(pdev, 0); -+ if (host->irq <= 0) { -+ dev_err(dev, "get IRQ failed\n"); -+ ret = -EINVAL; -+ goto err; -+ } -+ -+ if (node) { -+ mmc_of_parse(mmc); -+ -+ /* Read any custom properties */ -+ of_property_read_u32(node, -+ "brcm,overclock-50", -+ &host->overclock_50); -+ } else { -+ mmc->caps |= MMC_CAP_4_BIT_DATA; -+ } -+ -+ ret = bcm2835_mmc_add_host(host); -+ if (ret) -+ goto err; -+ -+ platform_set_drvdata(pdev, host); -+ -+ return 0; -+err: -+ mmc_free_host(mmc); -+ -+ return ret; -+} -+ -+static int bcm2835_mmc_remove(struct platform_device *pdev) -+{ -+ struct bcm2835_host *host = platform_get_drvdata(pdev); -+ unsigned long flags; -+ int dead; -+ u32 scratch; -+ -+ dead = 0; -+ scratch = bcm2835_mmc_readl(host, SDHCI_INT_STATUS); -+ if (scratch == (u32)-1) -+ dead = 1; -+ -+ -+ if (dead) { -+ spin_lock_irqsave(&host->lock, flags); -+ -+ host->flags |= SDHCI_DEVICE_DEAD; -+ -+ if (host->mrq) { -+ pr_err("%s: Controller removed during " -+ " transfer!\n", mmc_hostname(host->mmc)); -+ -+ host->mrq->cmd->error = -ENOMEDIUM; -+ tasklet_schedule(&host->finish_tasklet); -+ } -+ -+ spin_unlock_irqrestore(&host->lock, flags); -+ } -+ -+ mmc_remove_host(host->mmc); -+ -+ if (!dead) -+ bcm2835_mmc_reset(host, SDHCI_RESET_ALL); -+ -+ free_irq(host->irq, host); -+ -+ del_timer_sync(&host->timer); -+ -+ tasklet_kill(&host->finish_tasklet); -+ -+ mmc_free_host(host->mmc); -+ platform_set_drvdata(pdev, NULL); -+ -+ return 0; -+} -+ -+ -+static const struct of_device_id bcm2835_mmc_match[] = { -+ { .compatible = "brcm,bcm2835-mmc" }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, bcm2835_mmc_match); -+ -+ -+ -+static struct platform_driver bcm2835_mmc_driver = { -+ .probe = bcm2835_mmc_probe, -+ .remove = bcm2835_mmc_remove, -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = bcm2835_mmc_match, -+ }, -+}; -+module_platform_driver(bcm2835_mmc_driver); -+ -+module_param(mmc_debug, uint, 0644); -+module_param(mmc_debug2, uint, 0644); -+MODULE_ALIAS("platform:mmc-bcm2835"); -+MODULE_DESCRIPTION("BCM2835 SDHCI driver"); -+MODULE_LICENSE("GPL v2"); -+MODULE_AUTHOR("Gellert Weisz"); diff --git a/target/linux/brcm2708/patches-4.9/0035-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch b/target/linux/brcm2708/patches-4.9/0035-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch deleted file mode 100644 index c4597ec3c1aa..000000000000 --- a/target/linux/brcm2708/patches-4.9/0035-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch +++ /dev/null @@ -1,2399 +0,0 @@ -From 5da331581bb2a8d90f6a7a7bdf8c1b30efe3cf64 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 25 Mar 2015 17:49:47 +0000 -Subject: [PATCH] Adding bcm2835-sdhost driver, and an overlay to enable it - -BCM2835 has two SD card interfaces. This driver uses the other one. - -bcm2835-sdhost: Error handling fix, and code clarification - -bcm2835-sdhost: Adding overclocking option - -Allow a different clock speed to be substitued for a requested 50MHz. -This option is exposed using the "overclock_50" DT parameter. -Note that the sdhost interface is restricted to integer divisions of -core_freq, and the highest sensible option for a core_freq of 250MHz -is 84 (250/3 = 83.3MHz), the next being 125 (250/2) which is much too -high. - -Use at your own risk. - -bcm2835-sdhost: Round up the overclock, so 62 works for 62.5Mhz - -Also only warn once for each overclock setting. - -bcm2835-sdhost: Improve error handling and recovery - -1) Expose the hw_reset method to the MMC framework, removing many - internal calls by the driver. - -2) Reduce overclock setting on error. - -3) Increase timeout to cope with high capacity cards. - -4) Add properties and parameters to control pio_limit and debug. - -5) Reduce messages at probe time. - -bcm2835-sdhost: Further improve overclock back-off - -bcm2835-sdhost: Clear HBLC for PIO mode - -Also update pio_limit default in overlay README. - -bcm2835-sdhost: Add the ERASE capability - -See: https://github.com/raspberrypi/linux/issues/1076 - -bcm2835-sdhost: Ignore CRC7 for MMC CMD1 - -It seems that the sdhost interface returns CRC7 errors for CMD1, -which is the MMC-specific SEND_OP_COND. Returning these errors to -the MMC layer causes a downward spiral, but ignoring them seems -to be harmless. - -bcm2835-mmc/sdhost: Remove ARCH_BCM2835 differences - -The bcm2835-mmc driver (and -sdhost driver that copied from it) -contains code to handle SDIO interrupts in a threaded interrupt -handler rather than waking the MMC framework thread. The change -follows a patch from Russell King that adds the facility as the -preferred way of working. - -However, the new code path is only present in ARCH_BCM2835 -builds, which I have taken to be a way of testing the waters -rather than making the change across the board; I can't see -any technical reason why it wouldn't be enabled for MACH_BCM270X -builds. So this patch standardises on the ARCH_BCM2835 code, -removing the old code paths. - -bcm2835-sdhost: Don't log timeout errors unless debug=1 - -The MMC card-discovery process generates timeouts. This is -expected behaviour, so reporting it to the user serves no purpose. -Suppress the reporting of timeout errors unless the debug flag -is on. - -bcm2835-sdhost: Add workaround for odd behaviour on some cards - -For reasons not understood, the sdhost driver fails when reading -sectors very near the end of some SD cards. The problem could -be related to the similar issue that reading the final sector -of any card as part of a multiple read never completes, and the -workaround is an extension of the mechanism introduced to solve -that problem which ensures those sectors are always read singly. - -bcm2835-sdhost: Major revision - -This is a significant revision of the bcm2835-sdhost driver. It -improves on the original in a number of ways: - -1) Through the use of CMD23 for reads it appears to avoid problems - reading some sectors on certain high speed cards. -2) Better atomicity to prevent crashes. -3) Higher performance. -4) Activity logging included, for easier diagnosis in the event - of a problem. - -Signed-off-by: Phil Elwell - -bcm2835-sdhost: Restore ATOMIC flag to PIO sg mapping - -Allocation problems have been seen in a wireless driver, and -this is the only change which might have been responsible. - -SQUASH: bcm2835-sdhost: Only claim one DMA channel - -With both MMC controllers enabled there are few DMA channels left. The -bcm2835-sdhost driver only uses DMA in one direction at a time, so it -doesn't need to claim two channels. - -See: https://github.com/raspberrypi/linux/issues/1327 - -Signed-off-by: Phil Elwell - -bcm2835-sdhost: Workaround for "slow" sectors - -Some cards have been seen to cause timeouts after certain sectors are -read. This workaround enforces a minimum delay between the stop after -reading one of those sectors and a subsequent data command. - -Using CMD23 (SET_BLOCK_COUNT) avoids this problem, so good cards will -not be penalised by this workaround. - -Signed-off-by: Phil Elwell - -bcm2835-sdhost: Firmware manages the clock divisor - -The bcm2835-sdhost driver hands control of the CDIV clock divisor -register to matching firmware, allowing it to adjust to a changing -core clock. This removes the need to use the performance governor or -to enable io_is_busy on the on-demand governor in order to get the -best SD performance. - -N.B. As SD clocks must be an integer divisor of the core clock, it is -possible that the SD clock for "turbo" mode can be different (even -lower) than "normal" mode. - -Signed-off-by: Phil Elwell - -bcm2835-sdhost: Reset the clock in task context - -Since reprogramming the clock can now involve a round-trip to the -firmware it must not be done at atomic context, and a tasklet -is not a task. - -Signed-off-by: Phil Elwell - -bcm2835-sdhost: Don't exit cmd wait loop on error - -The FAIL flag can be set in the CMD register before command processing -is complete, leading to spurious "failed to complete" errors. This has -the effect of promoting harmless CRC7 errors during CMD1 processing -into errors that can delay and even prevent booting. - -Also: -1) Convert the last KERN_ERROR message in the register dumping to - KERN_INFO. -2) Remove an unnecessary reset call from bcm2835_sdhost_add_host. - -See: https://github.com/raspberrypi/linux/pull/1492 - -Signed-off-by: Phil Elwell ---- - drivers/mmc/host/Kconfig | 12 +- - drivers/mmc/host/Makefile | 1 + - drivers/mmc/host/bcm2835-sdhost.c | 2189 +++++++++++++++++++++++++++++++++++++ - 3 files changed, 2201 insertions(+), 1 deletion(-) - create mode 100644 drivers/mmc/host/bcm2835-sdhost.c - ---- a/drivers/mmc/host/Kconfig -+++ b/drivers/mmc/host/Kconfig -@@ -6,7 +6,7 @@ comment "MMC/SD/SDIO Host Controller Dri - - config MMC_BCM2835 - tristate "MMC support on BCM2835" -- depends on MACH_BCM2708 || MACH_BCM2709 || ARCH_BCM2835 -+ depends on ARCH_BCM2835 - help - This selects the MMC Interface on BCM2835. - -@@ -33,6 +33,16 @@ config MMC_BCM2835_PIO_DMA_BARRIER - - If unsure, say 2 here. - -+config MMC_BCM2835_SDHOST -+ tristate "Support for the SDHost controller on BCM2708/9" -+ depends on ARCH_BCM2835 -+ help -+ This selects the SDHost controller on BCM2835/6. -+ -+ If you have a controller with this interface, say Y or M here. -+ -+ If unsure, say N. -+ - config MMC_ARMMMCI - tristate "ARM AMBA Multimedia Card Interface support" - depends on ARM_AMBA ---- a/drivers/mmc/host/Makefile -+++ b/drivers/mmc/host/Makefile -@@ -18,6 +18,7 @@ obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c - obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o - obj-$(CONFIG_MMC_SDHCI_F_SDH30) += sdhci_f_sdh30.o - obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o -+obj-$(CONFIG_MMC_BCM2835_SDHOST) += bcm2835-sdhost.o - obj-$(CONFIG_MMC_BCM2835) += bcm2835-mmc.o - obj-$(CONFIG_MMC_WBSD) += wbsd.o - obj-$(CONFIG_MMC_AU1X) += au1xmmc.o ---- /dev/null -+++ b/drivers/mmc/host/bcm2835-sdhost.c -@@ -0,0 +1,2189 @@ -+/* -+ * BCM2835 SD host driver. -+ * -+ * Author: Phil Elwell -+ * Copyright (C) 2015-2016 Raspberry Pi (Trading) Ltd. -+ * -+ * Based on -+ * mmc-bcm2835.c by Gellert Weisz -+ * which is, in turn, based on -+ * sdhci-bcm2708.c by Broadcom -+ * sdhci-bcm2835.c by Stephen Warren and Oleksandr Tymoshenko -+ * sdhci.c and sdhci-pci.c by Pierre Ossman -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms and conditions of the GNU General Public License, -+ * version 2, as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . -+ */ -+ -+#define FIFO_READ_THRESHOLD 4 -+#define FIFO_WRITE_THRESHOLD 4 -+#define ALLOW_CMD23_READ 1 -+#define ALLOW_CMD23_WRITE 0 -+#define ENABLE_LOG 1 -+#define SDDATA_FIFO_PIO_BURST 8 -+#define CMD_DALLY_US 1 -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define DRIVER_NAME "sdhost-bcm2835" -+ -+#define SDCMD 0x00 /* Command to SD card - 16 R/W */ -+#define SDARG 0x04 /* Argument to SD card - 32 R/W */ -+#define SDTOUT 0x08 /* Start value for timeout counter - 32 R/W */ -+#define SDCDIV 0x0c /* Start value for clock divider - 11 R/W */ -+#define SDRSP0 0x10 /* SD card response (31:0) - 32 R */ -+#define SDRSP1 0x14 /* SD card response (63:32) - 32 R */ -+#define SDRSP2 0x18 /* SD card response (95:64) - 32 R */ -+#define SDRSP3 0x1c /* SD card response (127:96) - 32 R */ -+#define SDHSTS 0x20 /* SD host status - 11 R */ -+#define SDVDD 0x30 /* SD card power control - 1 R/W */ -+#define SDEDM 0x34 /* Emergency Debug Mode - 13 R/W */ -+#define SDHCFG 0x38 /* Host configuration - 2 R/W */ -+#define SDHBCT 0x3c /* Host byte count (debug) - 32 R/W */ -+#define SDDATA 0x40 /* Data to/from SD card - 32 R/W */ -+#define SDHBLC 0x50 /* Host block count (SDIO/SDHC) - 9 R/W */ -+ -+#define SDCMD_NEW_FLAG 0x8000 -+#define SDCMD_FAIL_FLAG 0x4000 -+#define SDCMD_BUSYWAIT 0x800 -+#define SDCMD_NO_RESPONSE 0x400 -+#define SDCMD_LONG_RESPONSE 0x200 -+#define SDCMD_WRITE_CMD 0x80 -+#define SDCMD_READ_CMD 0x40 -+#define SDCMD_CMD_MASK 0x3f -+ -+#define SDCDIV_MAX_CDIV 0x7ff -+ -+#define SDHSTS_BUSY_IRPT 0x400 -+#define SDHSTS_BLOCK_IRPT 0x200 -+#define SDHSTS_SDIO_IRPT 0x100 -+#define SDHSTS_REW_TIME_OUT 0x80 -+#define SDHSTS_CMD_TIME_OUT 0x40 -+#define SDHSTS_CRC16_ERROR 0x20 -+#define SDHSTS_CRC7_ERROR 0x10 -+#define SDHSTS_FIFO_ERROR 0x08 -+/* Reserved */ -+/* Reserved */ -+#define SDHSTS_DATA_FLAG 0x01 -+ -+#define SDHSTS_TRANSFER_ERROR_MASK (SDHSTS_CRC7_ERROR|SDHSTS_CRC16_ERROR|SDHSTS_REW_TIME_OUT|SDHSTS_FIFO_ERROR) -+#define SDHSTS_ERROR_MASK (SDHSTS_CMD_TIME_OUT|SDHSTS_TRANSFER_ERROR_MASK) -+ -+#define SDHCFG_BUSY_IRPT_EN (1<<10) -+#define SDHCFG_BLOCK_IRPT_EN (1<<8) -+#define SDHCFG_SDIO_IRPT_EN (1<<5) -+#define SDHCFG_DATA_IRPT_EN (1<<4) -+#define SDHCFG_SLOW_CARD (1<<3) -+#define SDHCFG_WIDE_EXT_BUS (1<<2) -+#define SDHCFG_WIDE_INT_BUS (1<<1) -+#define SDHCFG_REL_CMD_LINE (1<<0) -+ -+#define SDEDM_FORCE_DATA_MODE (1<<19) -+#define SDEDM_CLOCK_PULSE (1<<20) -+#define SDEDM_BYPASS (1<<21) -+ -+#define SDEDM_WRITE_THRESHOLD_SHIFT 9 -+#define SDEDM_READ_THRESHOLD_SHIFT 14 -+#define SDEDM_THRESHOLD_MASK 0x1f -+ -+#define SDEDM_FSM_MASK 0xf -+#define SDEDM_FSM_IDENTMODE 0x0 -+#define SDEDM_FSM_DATAMODE 0x1 -+#define SDEDM_FSM_READDATA 0x2 -+#define SDEDM_FSM_WRITEDATA 0x3 -+#define SDEDM_FSM_READWAIT 0x4 -+#define SDEDM_FSM_READCRC 0x5 -+#define SDEDM_FSM_WRITECRC 0x6 -+#define SDEDM_FSM_WRITEWAIT1 0x7 -+#define SDEDM_FSM_POWERDOWN 0x8 -+#define SDEDM_FSM_POWERUP 0x9 -+#define SDEDM_FSM_WRITESTART1 0xa -+#define SDEDM_FSM_WRITESTART2 0xb -+#define SDEDM_FSM_GENPULSES 0xc -+#define SDEDM_FSM_WRITEWAIT2 0xd -+#define SDEDM_FSM_STARTPOWDOWN 0xf -+ -+#define SDDATA_FIFO_WORDS 16 -+ -+#define USE_CMD23_FLAGS ((ALLOW_CMD23_READ * MMC_DATA_READ) | \ -+ (ALLOW_CMD23_WRITE * MMC_DATA_WRITE)) -+ -+#define MHZ 1000000 -+ -+ -+struct bcm2835_host { -+ spinlock_t lock; -+ -+ void __iomem *ioaddr; -+ u32 bus_addr; -+ -+ struct mmc_host *mmc; -+ -+ u32 pio_timeout; /* In jiffies */ -+ -+ int clock; /* Current clock speed */ -+ -+ bool slow_card; /* Force 11-bit divisor */ -+ -+ unsigned int max_clk; /* Max possible freq */ -+ -+ struct tasklet_struct finish_tasklet; /* Tasklet structures */ -+ -+ struct work_struct cmd_wait_wq; /* Workqueue function */ -+ -+ struct timer_list timer; /* Timer for timeouts */ -+ -+ struct sg_mapping_iter sg_miter; /* SG state for PIO */ -+ unsigned int blocks; /* remaining PIO blocks */ -+ -+ int irq; /* Device IRQ */ -+ -+ u32 cmd_quick_poll_retries; -+ u32 ns_per_fifo_word; -+ -+ /* cached registers */ -+ u32 hcfg; -+ u32 cdiv; -+ -+ struct mmc_request *mrq; /* Current request */ -+ struct mmc_command *cmd; /* Current command */ -+ struct mmc_data *data; /* Current data request */ -+ unsigned int data_complete:1; /* Data finished before cmd */ -+ -+ unsigned int flush_fifo:1; /* Drain the fifo when finishing */ -+ -+ unsigned int use_busy:1; /* Wait for busy interrupt */ -+ -+ unsigned int use_sbc:1; /* Send CMD23 */ -+ -+ unsigned int debug:1; /* Enable debug output */ -+ unsigned int firmware_sets_cdiv:1; /* Let the firmware manage the clock */ -+ unsigned int reset_clock:1; /* Reset the clock fore the next request */ -+ -+ /*DMA part*/ -+ struct dma_chan *dma_chan_rxtx; /* DMA channel for reads and writes */ -+ struct dma_chan *dma_chan; /* Channel in use */ -+ struct dma_slave_config dma_cfg_rx; -+ struct dma_slave_config dma_cfg_tx; -+ struct dma_async_tx_descriptor *dma_desc; -+ u32 dma_dir; -+ u32 drain_words; -+ struct page *drain_page; -+ u32 drain_offset; -+ -+ bool allow_dma; -+ bool use_dma; -+ /*end of DMA part*/ -+ -+ int max_delay; /* maximum length of time spent waiting */ -+ struct timeval stop_time; /* when the last stop was issued */ -+ u32 delay_after_stop; /* minimum time between stop and subsequent data transfer */ -+ u32 delay_after_this_stop; /* minimum time between this stop and subsequent data transfer */ -+ u32 user_overclock_50; /* User's preferred frequency to use when 50MHz is requested (in MHz) */ -+ u32 overclock_50; /* frequency to use when 50MHz is requested (in MHz) */ -+ u32 overclock; /* Current frequency if overclocked, else zero */ -+ u32 pio_limit; /* Maximum block count for PIO (0 = always DMA) */ -+ -+ u32 sectors; /* Cached card size in sectors */ -+}; -+ -+#if ENABLE_LOG -+ -+struct log_entry_struct { -+ char event[4]; -+ u32 timestamp; -+ u32 param1; -+ u32 param2; -+}; -+ -+typedef struct log_entry_struct LOG_ENTRY_T; -+ -+LOG_ENTRY_T *sdhost_log_buf; -+dma_addr_t sdhost_log_addr; -+static u32 sdhost_log_idx; -+static spinlock_t log_lock; -+static void __iomem *timer_base; -+ -+#define LOG_ENTRIES (256*1) -+#define LOG_SIZE (sizeof(LOG_ENTRY_T)*LOG_ENTRIES) -+ -+static void log_init(struct device *dev, u32 bus_to_phys) -+{ -+ spin_lock_init(&log_lock); -+ sdhost_log_buf = dma_zalloc_coherent(dev, LOG_SIZE, &sdhost_log_addr, -+ GFP_KERNEL); -+ if (sdhost_log_buf) { -+ pr_info("sdhost: log_buf @ %p (%x)\n", -+ sdhost_log_buf, sdhost_log_addr); -+ timer_base = ioremap_nocache(bus_to_phys + 0x7e003000, SZ_4K); -+ if (!timer_base) -+ pr_err("sdhost: failed to remap timer\n"); -+ } -+ else -+ pr_err("sdhost: failed to allocate log buf\n"); -+} -+ -+static void log_event_impl(const char *event, u32 param1, u32 param2) -+{ -+ if (sdhost_log_buf) { -+ LOG_ENTRY_T *entry; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&log_lock, flags); -+ -+ entry = sdhost_log_buf + sdhost_log_idx; -+ memcpy(entry->event, event, 4); -+ entry->timestamp = (readl(timer_base + 4) & 0x3fffffff) + -+ (smp_processor_id()<<30); -+ entry->param1 = param1; -+ entry->param2 = param2; -+ sdhost_log_idx = (sdhost_log_idx + 1) % LOG_ENTRIES; -+ -+ spin_unlock_irqrestore(&log_lock, flags); -+ } -+} -+ -+static void log_dump(void) -+{ -+ if (sdhost_log_buf) { -+ LOG_ENTRY_T *entry; -+ unsigned long flags; -+ int idx; -+ -+ spin_lock_irqsave(&log_lock, flags); -+ -+ idx = sdhost_log_idx; -+ do { -+ entry = sdhost_log_buf + idx; -+ if (entry->event[0] != '\0') -+ pr_info("[%08x] %.4s %x %x\n", -+ entry->timestamp, -+ entry->event, -+ entry->param1, -+ entry->param2); -+ idx = (idx + 1) % LOG_ENTRIES; -+ } while (idx != sdhost_log_idx); -+ -+ spin_unlock_irqrestore(&log_lock, flags); -+ } -+} -+ -+#define log_event(event, param1, param2) log_event_impl(event, param1, param2) -+ -+#else -+ -+#define log_init(x) (void)0 -+#define log_event(event, param1, param2) (void)0 -+#define log_dump() (void)0 -+ -+#endif -+ -+static inline void bcm2835_sdhost_write(struct bcm2835_host *host, u32 val, int reg) -+{ -+ writel(val, host->ioaddr + reg); -+} -+ -+static inline u32 bcm2835_sdhost_read(struct bcm2835_host *host, int reg) -+{ -+ return readl(host->ioaddr + reg); -+} -+ -+static inline u32 bcm2835_sdhost_read_relaxed(struct bcm2835_host *host, int reg) -+{ -+ return readl_relaxed(host->ioaddr + reg); -+} -+ -+static void bcm2835_sdhost_dumpcmd(struct bcm2835_host *host, -+ struct mmc_command *cmd, -+ const char *label) -+{ -+ if (cmd) -+ pr_info("%s:%c%s op %d arg 0x%x flags 0x%x - resp %08x %08x %08x %08x, err %d\n", -+ mmc_hostname(host->mmc), -+ (cmd == host->cmd) ? '>' : ' ', -+ label, cmd->opcode, cmd->arg, cmd->flags, -+ cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3], -+ cmd->error); -+} -+ -+static void bcm2835_sdhost_dumpregs(struct bcm2835_host *host) -+{ -+ if (host->mrq) -+ { -+ bcm2835_sdhost_dumpcmd(host, host->mrq->sbc, "sbc"); -+ bcm2835_sdhost_dumpcmd(host, host->mrq->cmd, "cmd"); -+ if (host->mrq->data) -+ pr_info("%s: data blocks %x blksz %x - err %d\n", -+ mmc_hostname(host->mmc), -+ host->mrq->data->blocks, -+ host->mrq->data->blksz, -+ host->mrq->data->error); -+ bcm2835_sdhost_dumpcmd(host, host->mrq->stop, "stop"); -+ } -+ -+ pr_info("%s: =========== REGISTER DUMP ===========\n", -+ mmc_hostname(host->mmc)); -+ -+ pr_info("%s: SDCMD 0x%08x\n", -+ mmc_hostname(host->mmc), -+ bcm2835_sdhost_read(host, SDCMD)); -+ pr_info("%s: SDARG 0x%08x\n", -+ mmc_hostname(host->mmc), -+ bcm2835_sdhost_read(host, SDARG)); -+ pr_info("%s: SDTOUT 0x%08x\n", -+ mmc_hostname(host->mmc), -+ bcm2835_sdhost_read(host, SDTOUT)); -+ pr_info("%s: SDCDIV 0x%08x\n", -+ mmc_hostname(host->mmc), -+ bcm2835_sdhost_read(host, SDCDIV)); -+ pr_info("%s: SDRSP0 0x%08x\n", -+ mmc_hostname(host->mmc), -+ bcm2835_sdhost_read(host, SDRSP0)); -+ pr_info("%s: SDRSP1 0x%08x\n", -+ mmc_hostname(host->mmc), -+ bcm2835_sdhost_read(host, SDRSP1)); -+ pr_info("%s: SDRSP2 0x%08x\n", -+ mmc_hostname(host->mmc), -+ bcm2835_sdhost_read(host, SDRSP2)); -+ pr_info("%s: SDRSP3 0x%08x\n", -+ mmc_hostname(host->mmc), -+ bcm2835_sdhost_read(host, SDRSP3)); -+ pr_info("%s: SDHSTS 0x%08x\n", -+ mmc_hostname(host->mmc), -+ bcm2835_sdhost_read(host, SDHSTS)); -+ pr_info("%s: SDVDD 0x%08x\n", -+ mmc_hostname(host->mmc), -+ bcm2835_sdhost_read(host, SDVDD)); -+ pr_info("%s: SDEDM 0x%08x\n", -+ mmc_hostname(host->mmc), -+ bcm2835_sdhost_read(host, SDEDM)); -+ pr_info("%s: SDHCFG 0x%08x\n", -+ mmc_hostname(host->mmc), -+ bcm2835_sdhost_read(host, SDHCFG)); -+ pr_info("%s: SDHBCT 0x%08x\n", -+ mmc_hostname(host->mmc), -+ bcm2835_sdhost_read(host, SDHBCT)); -+ pr_info("%s: SDHBLC 0x%08x\n", -+ mmc_hostname(host->mmc), -+ bcm2835_sdhost_read(host, SDHBLC)); -+ -+ pr_info("%s: ===========================================\n", -+ mmc_hostname(host->mmc)); -+} -+ -+static void bcm2835_sdhost_set_power(struct bcm2835_host *host, bool on) -+{ -+ bcm2835_sdhost_write(host, on ? 1 : 0, SDVDD); -+} -+ -+static void bcm2835_sdhost_reset_internal(struct bcm2835_host *host) -+{ -+ u32 temp; -+ -+ if (host->debug) -+ pr_info("%s: reset\n", mmc_hostname(host->mmc)); -+ -+ bcm2835_sdhost_set_power(host, false); -+ -+ bcm2835_sdhost_write(host, 0, SDCMD); -+ bcm2835_sdhost_write(host, 0, SDARG); -+ bcm2835_sdhost_write(host, 0xf00000, SDTOUT); -+ bcm2835_sdhost_write(host, 0, SDCDIV); -+ bcm2835_sdhost_write(host, 0x7f8, SDHSTS); /* Write 1s to clear */ -+ bcm2835_sdhost_write(host, 0, SDHCFG); -+ bcm2835_sdhost_write(host, 0, SDHBCT); -+ bcm2835_sdhost_write(host, 0, SDHBLC); -+ -+ /* Limit fifo usage due to silicon bug */ -+ temp = bcm2835_sdhost_read(host, SDEDM); -+ temp &= ~((SDEDM_THRESHOLD_MASK<clock = 0; -+ host->sectors = 0; -+ bcm2835_sdhost_write(host, host->hcfg, SDHCFG); -+ bcm2835_sdhost_write(host, SDCDIV_MAX_CDIV, SDCDIV); -+ mmiowb(); -+} -+ -+static void bcm2835_sdhost_reset(struct mmc_host *mmc) -+{ -+ struct bcm2835_host *host = mmc_priv(mmc); -+ unsigned long flags; -+ spin_lock_irqsave(&host->lock, flags); -+ log_event("RST<", 0, 0); -+ -+ bcm2835_sdhost_reset_internal(host); -+ -+ spin_unlock_irqrestore(&host->lock, flags); -+} -+ -+static void bcm2835_sdhost_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); -+ -+static void bcm2835_sdhost_init(struct bcm2835_host *host, int soft) -+{ -+ pr_debug("bcm2835_sdhost_init(%d)\n", soft); -+ -+ /* Set interrupt enables */ -+ host->hcfg = SDHCFG_BUSY_IRPT_EN; -+ -+ bcm2835_sdhost_reset_internal(host); -+ -+ if (soft) { -+ /* force clock reconfiguration */ -+ host->clock = 0; -+ bcm2835_sdhost_set_ios(host->mmc, &host->mmc->ios); -+ } -+} -+ -+static void bcm2835_sdhost_wait_transfer_complete(struct bcm2835_host *host) -+{ -+ int timediff; -+ u32 alternate_idle; -+ u32 edm; -+ -+ alternate_idle = (host->mrq->data->flags & MMC_DATA_READ) ? -+ SDEDM_FSM_READWAIT : SDEDM_FSM_WRITESTART1; -+ -+ edm = bcm2835_sdhost_read(host, SDEDM); -+ -+ log_event("WTC<", edm, 0); -+ -+ timediff = 0; -+ -+ while (1) { -+ u32 fsm = edm & SDEDM_FSM_MASK; -+ if ((fsm == SDEDM_FSM_IDENTMODE) || -+ (fsm == SDEDM_FSM_DATAMODE)) -+ break; -+ if (fsm == alternate_idle) { -+ bcm2835_sdhost_write(host, -+ edm | SDEDM_FORCE_DATA_MODE, -+ SDEDM); -+ break; -+ } -+ -+ timediff++; -+ if (timediff == 100000) { -+ pr_err("%s: wait_transfer_complete - still waiting after %d retries\n", -+ mmc_hostname(host->mmc), -+ timediff); -+ log_dump(); -+ bcm2835_sdhost_dumpregs(host); -+ host->mrq->data->error = -ETIMEDOUT; -+ log_event("WTC!", edm, 0); -+ return; -+ } -+ cpu_relax(); -+ edm = bcm2835_sdhost_read(host, SDEDM); -+ } -+ log_event("WTC>", edm, 0); -+} -+ -+static void bcm2835_sdhost_finish_data(struct bcm2835_host *host); -+ -+static void bcm2835_sdhost_dma_complete(void *param) -+{ -+ struct bcm2835_host *host = param; -+ struct mmc_data *data = host->data; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&host->lock, flags); -+ log_event("DMA<", (u32)host->data, bcm2835_sdhost_read(host, SDHSTS)); -+ log_event("DMA ", bcm2835_sdhost_read(host, SDCMD), -+ bcm2835_sdhost_read(host, SDEDM)); -+ -+ if (host->dma_chan) { -+ dma_unmap_sg(host->dma_chan->device->dev, -+ data->sg, data->sg_len, -+ host->dma_dir); -+ -+ host->dma_chan = NULL; -+ } -+ -+ if (host->drain_words) { -+ void *page; -+ u32 *buf; -+ -+ page = kmap_atomic(host->drain_page); -+ buf = page + host->drain_offset; -+ -+ while (host->drain_words) { -+ u32 edm = bcm2835_sdhost_read(host, SDEDM); -+ if ((edm >> 4) & 0x1f) -+ *(buf++) = bcm2835_sdhost_read(host, -+ SDDATA); -+ host->drain_words--; -+ } -+ -+ kunmap_atomic(page); -+ } -+ -+ bcm2835_sdhost_finish_data(host); -+ -+ log_event("DMA>", (u32)host->data, 0); -+ spin_unlock_irqrestore(&host->lock, flags); -+} -+ -+static void bcm2835_sdhost_read_block_pio(struct bcm2835_host *host) -+{ -+ unsigned long flags; -+ size_t blksize, len; -+ u32 *buf; -+ unsigned long wait_max; -+ -+ blksize = host->data->blksz; -+ -+ wait_max = jiffies + msecs_to_jiffies(host->pio_timeout); -+ -+ local_irq_save(flags); -+ -+ while (blksize) { -+ int copy_words; -+ u32 hsts = 0; -+ -+ if (!sg_miter_next(&host->sg_miter)) { -+ host->data->error = -EINVAL; -+ break; -+ } -+ -+ len = min(host->sg_miter.length, blksize); -+ if (len % 4) { -+ host->data->error = -EINVAL; -+ break; -+ } -+ -+ blksize -= len; -+ host->sg_miter.consumed = len; -+ -+ buf = (u32 *)host->sg_miter.addr; -+ -+ copy_words = len/4; -+ -+ while (copy_words) { -+ int burst_words, words; -+ u32 edm; -+ -+ burst_words = SDDATA_FIFO_PIO_BURST; -+ if (burst_words > copy_words) -+ burst_words = copy_words; -+ edm = bcm2835_sdhost_read(host, SDEDM); -+ words = ((edm >> 4) & 0x1f); -+ -+ if (words < burst_words) { -+ int fsm_state = (edm & SDEDM_FSM_MASK); -+ if ((fsm_state != SDEDM_FSM_READDATA) && -+ (fsm_state != SDEDM_FSM_READWAIT) && -+ (fsm_state != SDEDM_FSM_READCRC)) { -+ hsts = bcm2835_sdhost_read(host, -+ SDHSTS); -+ pr_info("%s: fsm %x, hsts %x\n", -+ mmc_hostname(host->mmc), -+ fsm_state, hsts); -+ if (hsts & SDHSTS_ERROR_MASK) -+ break; -+ } -+ -+ if (time_after(jiffies, wait_max)) { -+ pr_err("%s: PIO read timeout - EDM %x\n", -+ mmc_hostname(host->mmc), -+ edm); -+ hsts = SDHSTS_REW_TIME_OUT; -+ break; -+ } -+ ndelay((burst_words - words) * -+ host->ns_per_fifo_word); -+ continue; -+ } else if (words > copy_words) { -+ words = copy_words; -+ } -+ -+ copy_words -= words; -+ -+ while (words) { -+ *(buf++) = bcm2835_sdhost_read(host, SDDATA); -+ words--; -+ } -+ } -+ -+ if (hsts & SDHSTS_ERROR_MASK) -+ break; -+ } -+ -+ sg_miter_stop(&host->sg_miter); -+ -+ local_irq_restore(flags); -+} -+ -+static void bcm2835_sdhost_write_block_pio(struct bcm2835_host *host) -+{ -+ unsigned long flags; -+ size_t blksize, len; -+ u32 *buf; -+ unsigned long wait_max; -+ -+ blksize = host->data->blksz; -+ -+ wait_max = jiffies + msecs_to_jiffies(host->pio_timeout); -+ -+ local_irq_save(flags); -+ -+ while (blksize) { -+ int copy_words; -+ u32 hsts = 0; -+ -+ if (!sg_miter_next(&host->sg_miter)) { -+ host->data->error = -EINVAL; -+ break; -+ } -+ -+ len = min(host->sg_miter.length, blksize); -+ if (len % 4) { -+ host->data->error = -EINVAL; -+ break; -+ } -+ -+ blksize -= len; -+ host->sg_miter.consumed = len; -+ -+ buf = (u32 *)host->sg_miter.addr; -+ -+ copy_words = len/4; -+ -+ while (copy_words) { -+ int burst_words, words; -+ u32 edm; -+ -+ burst_words = SDDATA_FIFO_PIO_BURST; -+ if (burst_words > copy_words) -+ burst_words = copy_words; -+ edm = bcm2835_sdhost_read(host, SDEDM); -+ words = SDDATA_FIFO_WORDS - ((edm >> 4) & 0x1f); -+ -+ if (words < burst_words) { -+ int fsm_state = (edm & SDEDM_FSM_MASK); -+ if ((fsm_state != SDEDM_FSM_WRITEDATA) && -+ (fsm_state != SDEDM_FSM_WRITESTART1) && -+ (fsm_state != SDEDM_FSM_WRITESTART2)) { -+ hsts = bcm2835_sdhost_read(host, -+ SDHSTS); -+ pr_info("%s: fsm %x, hsts %x\n", -+ mmc_hostname(host->mmc), -+ fsm_state, hsts); -+ if (hsts & SDHSTS_ERROR_MASK) -+ break; -+ } -+ -+ if (time_after(jiffies, wait_max)) { -+ pr_err("%s: PIO write timeout - EDM %x\n", -+ mmc_hostname(host->mmc), -+ edm); -+ hsts = SDHSTS_REW_TIME_OUT; -+ break; -+ } -+ ndelay((burst_words - words) * -+ host->ns_per_fifo_word); -+ continue; -+ } else if (words > copy_words) { -+ words = copy_words; -+ } -+ -+ copy_words -= words; -+ -+ while (words) { -+ bcm2835_sdhost_write(host, *(buf++), SDDATA); -+ words--; -+ } -+ } -+ -+ if (hsts & SDHSTS_ERROR_MASK) -+ break; -+ } -+ -+ sg_miter_stop(&host->sg_miter); -+ -+ local_irq_restore(flags); -+} -+ -+static void bcm2835_sdhost_transfer_pio(struct bcm2835_host *host) -+{ -+ u32 sdhsts; -+ bool is_read; -+ BUG_ON(!host->data); -+ log_event("XFP<", (u32)host->data, host->blocks); -+ -+ is_read = (host->data->flags & MMC_DATA_READ) != 0; -+ if (is_read) -+ bcm2835_sdhost_read_block_pio(host); -+ else -+ bcm2835_sdhost_write_block_pio(host); -+ -+ sdhsts = bcm2835_sdhost_read(host, SDHSTS); -+ if (sdhsts & (SDHSTS_CRC16_ERROR | -+ SDHSTS_CRC7_ERROR | -+ SDHSTS_FIFO_ERROR)) { -+ pr_err("%s: %s transfer error - HSTS %x\n", -+ mmc_hostname(host->mmc), -+ is_read ? "read" : "write", -+ sdhsts); -+ host->data->error = -EILSEQ; -+ } else if ((sdhsts & (SDHSTS_CMD_TIME_OUT | -+ SDHSTS_REW_TIME_OUT))) { -+ pr_err("%s: %s timeout error - HSTS %x\n", -+ mmc_hostname(host->mmc), -+ is_read ? "read" : "write", -+ sdhsts); -+ host->data->error = -ETIMEDOUT; -+ } -+ log_event("XFP>", (u32)host->data, host->blocks); -+} -+ -+static void bcm2835_sdhost_prepare_dma(struct bcm2835_host *host, -+ struct mmc_data *data) -+{ -+ int len, dir_data, dir_slave; -+ struct dma_async_tx_descriptor *desc = NULL; -+ struct dma_chan *dma_chan; -+ -+ log_event("PRD<", (u32)data, 0); -+ pr_debug("bcm2835_sdhost_prepare_dma()\n"); -+ -+ dma_chan = host->dma_chan_rxtx; -+ if (data->flags & MMC_DATA_READ) { -+ dir_data = DMA_FROM_DEVICE; -+ dir_slave = DMA_DEV_TO_MEM; -+ } else { -+ dir_data = DMA_TO_DEVICE; -+ dir_slave = DMA_MEM_TO_DEV; -+ } -+ log_event("PRD1", (u32)dma_chan, 0); -+ -+ BUG_ON(!dma_chan->device); -+ BUG_ON(!dma_chan->device->dev); -+ BUG_ON(!data->sg); -+ -+ /* The block doesn't manage the FIFO DREQs properly for multi-block -+ transfers, so don't attempt to DMA the final few words. -+ Unfortunately this requires the final sg entry to be trimmed. -+ N.B. This code demands that the overspill is contained in -+ a single sg entry. -+ */ -+ -+ host->drain_words = 0; -+ if ((data->blocks > 1) && (dir_data == DMA_FROM_DEVICE)) { -+ struct scatterlist *sg; -+ u32 len; -+ int i; -+ -+ len = min((u32)(FIFO_READ_THRESHOLD - 1) * 4, -+ (u32)data->blocks * data->blksz); -+ -+ for_each_sg(data->sg, sg, data->sg_len, i) { -+ if (sg_is_last(sg)) { -+ BUG_ON(sg->length < len); -+ sg->length -= len; -+ host->drain_page = sg_page(sg); -+ host->drain_offset = sg->offset + sg->length; -+ } -+ } -+ host->drain_words = len/4; -+ } -+ -+ /* The parameters have already been validated, so this will not fail */ -+ (void)dmaengine_slave_config(dma_chan, -+ (dir_data == DMA_FROM_DEVICE) ? -+ &host->dma_cfg_rx : -+ &host->dma_cfg_tx); -+ -+ len = dma_map_sg(dma_chan->device->dev, data->sg, data->sg_len, -+ dir_data); -+ -+ log_event("PRD2", len, 0); -+ if (len > 0) -+ desc = dmaengine_prep_slave_sg(dma_chan, data->sg, -+ len, dir_slave, -+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK); -+ log_event("PRD3", (u32)desc, 0); -+ -+ if (desc) { -+ desc->callback = bcm2835_sdhost_dma_complete; -+ desc->callback_param = host; -+ host->dma_desc = desc; -+ host->dma_chan = dma_chan; -+ host->dma_dir = dir_data; -+ } -+ log_event("PDM>", (u32)data, 0); -+} -+ -+static void bcm2835_sdhost_start_dma(struct bcm2835_host *host) -+{ -+ log_event("SDMA", (u32)host->data, (u32)host->dma_chan); -+ dmaengine_submit(host->dma_desc); -+ dma_async_issue_pending(host->dma_chan); -+} -+ -+static void bcm2835_sdhost_set_transfer_irqs(struct bcm2835_host *host) -+{ -+ u32 all_irqs = SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN | -+ SDHCFG_BUSY_IRPT_EN; -+ if (host->dma_desc) -+ host->hcfg = (host->hcfg & ~all_irqs) | -+ SDHCFG_BUSY_IRPT_EN; -+ else -+ host->hcfg = (host->hcfg & ~all_irqs) | -+ SDHCFG_DATA_IRPT_EN | -+ SDHCFG_BUSY_IRPT_EN; -+ -+ bcm2835_sdhost_write(host, host->hcfg, SDHCFG); -+} -+ -+static void bcm2835_sdhost_prepare_data(struct bcm2835_host *host, struct mmc_command *cmd) -+{ -+ struct mmc_data *data = cmd->data; -+ -+ WARN_ON(host->data); -+ -+ host->data = data; -+ if (!data) -+ return; -+ -+ /* Sanity checks */ -+ BUG_ON(data->blksz * data->blocks > 524288); -+ BUG_ON(data->blksz > host->mmc->max_blk_size); -+ BUG_ON(data->blocks > 65535); -+ -+ host->data_complete = 0; -+ host->flush_fifo = 0; -+ host->data->bytes_xfered = 0; -+ -+ if (!host->sectors && host->mmc->card) { -+ struct mmc_card *card = host->mmc->card; -+ if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) { -+ /* -+ * The EXT_CSD sector count is in number of 512 byte -+ * sectors. -+ */ -+ host->sectors = card->ext_csd.sectors; -+ } else { -+ /* -+ * The CSD capacity field is in units of read_blkbits. -+ * set_capacity takes units of 512 bytes. -+ */ -+ host->sectors = card->csd.capacity << -+ (card->csd.read_blkbits - 9); -+ } -+ } -+ -+ if (!host->dma_desc) { -+ /* Use PIO */ -+ int flags = SG_MITER_ATOMIC; -+ -+ if (data->flags & MMC_DATA_READ) -+ flags |= SG_MITER_TO_SG; -+ else -+ flags |= SG_MITER_FROM_SG; -+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); -+ host->blocks = data->blocks; -+ } -+ -+ bcm2835_sdhost_set_transfer_irqs(host); -+ -+ bcm2835_sdhost_write(host, data->blksz, SDHBCT); -+ bcm2835_sdhost_write(host, data->blocks, SDHBLC); -+ -+ BUG_ON(!host->data); -+} -+ -+bool bcm2835_sdhost_send_command(struct bcm2835_host *host, -+ struct mmc_command *cmd) -+{ -+ u32 sdcmd, sdhsts; -+ unsigned long timeout; -+ int delay; -+ -+ WARN_ON(host->cmd); -+ log_event("CMD<", cmd->opcode, cmd->arg); -+ -+ if (cmd->data) -+ pr_debug("%s: send_command %d 0x%x " -+ "(flags 0x%x) - %s %d*%d\n", -+ mmc_hostname(host->mmc), -+ cmd->opcode, cmd->arg, cmd->flags, -+ (cmd->data->flags & MMC_DATA_READ) ? -+ "read" : "write", cmd->data->blocks, -+ cmd->data->blksz); -+ else -+ pr_debug("%s: send_command %d 0x%x (flags 0x%x)\n", -+ mmc_hostname(host->mmc), -+ cmd->opcode, cmd->arg, cmd->flags); -+ -+ /* Wait max 100 ms */ -+ timeout = 10000; -+ -+ while (bcm2835_sdhost_read(host, SDCMD) & SDCMD_NEW_FLAG) { -+ if (timeout == 0) { -+ pr_warn("%s: previous command never completed.\n", -+ mmc_hostname(host->mmc)); -+ if (host->debug) -+ bcm2835_sdhost_dumpregs(host); -+ cmd->error = -EILSEQ; -+ tasklet_schedule(&host->finish_tasklet); -+ return false; -+ } -+ timeout--; -+ udelay(10); -+ } -+ -+ delay = (10000 - timeout)/100; -+ if (delay > host->max_delay) { -+ host->max_delay = delay; -+ pr_warning("%s: controller hung for %d ms\n", -+ mmc_hostname(host->mmc), -+ host->max_delay); -+ } -+ -+ timeout = jiffies; -+ if (!cmd->data && cmd->busy_timeout > 9000) -+ timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; -+ else -+ timeout += 10 * HZ; -+ mod_timer(&host->timer, timeout); -+ -+ host->cmd = cmd; -+ -+ /* Clear any error flags */ -+ sdhsts = bcm2835_sdhost_read(host, SDHSTS); -+ if (sdhsts & SDHSTS_ERROR_MASK) -+ bcm2835_sdhost_write(host, sdhsts, SDHSTS); -+ -+ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { -+ pr_err("%s: unsupported response type!\n", -+ mmc_hostname(host->mmc)); -+ cmd->error = -EINVAL; -+ tasklet_schedule(&host->finish_tasklet); -+ return false; -+ } -+ -+ bcm2835_sdhost_prepare_data(host, cmd); -+ -+ bcm2835_sdhost_write(host, cmd->arg, SDARG); -+ -+ sdcmd = cmd->opcode & SDCMD_CMD_MASK; -+ -+ host->use_busy = 0; -+ if (!(cmd->flags & MMC_RSP_PRESENT)) { -+ sdcmd |= SDCMD_NO_RESPONSE; -+ } else { -+ if (cmd->flags & MMC_RSP_136) -+ sdcmd |= SDCMD_LONG_RESPONSE; -+ if (cmd->flags & MMC_RSP_BUSY) { -+ sdcmd |= SDCMD_BUSYWAIT; -+ host->use_busy = 1; -+ } -+ } -+ -+ if (cmd->data) { -+ log_event("CMDD", cmd->data->blocks, cmd->data->blksz); -+ if (host->delay_after_this_stop) { -+ struct timeval now; -+ int time_since_stop; -+ do_gettimeofday(&now); -+ time_since_stop = (now.tv_sec - host->stop_time.tv_sec); -+ if (time_since_stop < 2) { -+ /* Possibly less than one second */ -+ time_since_stop = time_since_stop * 1000000 + -+ (now.tv_usec - host->stop_time.tv_usec); -+ if (time_since_stop < -+ host->delay_after_this_stop) -+ udelay(host->delay_after_this_stop - -+ time_since_stop); -+ } -+ } -+ -+ host->delay_after_this_stop = host->delay_after_stop; -+ if ((cmd->data->flags & MMC_DATA_READ) && !host->use_sbc) { -+ /* See if read crosses one of the hazardous sectors */ -+ u32 first_blk, last_blk; -+ -+ /* Intentionally include the following sector because -+ without CMD23/SBC the read may run on. */ -+ first_blk = host->mrq->cmd->arg; -+ last_blk = first_blk + cmd->data->blocks; -+ -+ if (((last_blk >= (host->sectors - 64)) && -+ (first_blk <= (host->sectors - 64))) || -+ ((last_blk >= (host->sectors - 32)) && -+ (first_blk <= (host->sectors - 32)))) { -+ host->delay_after_this_stop = -+ max(250u, host->delay_after_stop); -+ } -+ } -+ -+ if (cmd->data->flags & MMC_DATA_WRITE) -+ sdcmd |= SDCMD_WRITE_CMD; -+ if (cmd->data->flags & MMC_DATA_READ) -+ sdcmd |= SDCMD_READ_CMD; -+ } -+ -+ bcm2835_sdhost_write(host, sdcmd | SDCMD_NEW_FLAG, SDCMD); -+ -+ return true; -+} -+ -+static void bcm2835_sdhost_finish_command(struct bcm2835_host *host, -+ unsigned long *irq_flags); -+static void bcm2835_sdhost_transfer_complete(struct bcm2835_host *host); -+ -+static void bcm2835_sdhost_finish_data(struct bcm2835_host *host) -+{ -+ struct mmc_data *data; -+ -+ data = host->data; -+ BUG_ON(!data); -+ -+ log_event("FDA<", (u32)host->mrq, (u32)host->cmd); -+ pr_debug("finish_data(error %d, stop %d, sbc %d)\n", -+ data->error, data->stop ? 1 : 0, -+ host->mrq->sbc ? 1 : 0); -+ -+ host->hcfg &= ~(SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN); -+ bcm2835_sdhost_write(host, host->hcfg, SDHCFG); -+ -+ data->bytes_xfered = data->error ? 0 : (data->blksz * data->blocks); -+ -+ host->data_complete = 1; -+ -+ if (host->cmd) { -+ /* -+ * Data managed to finish before the -+ * command completed. Make sure we do -+ * things in the proper order. -+ */ -+ pr_debug("Finished early - HSTS %x\n", -+ bcm2835_sdhost_read(host, SDHSTS)); -+ } -+ else -+ bcm2835_sdhost_transfer_complete(host); -+ log_event("FDA>", (u32)host->mrq, (u32)host->cmd); -+} -+ -+static void bcm2835_sdhost_transfer_complete(struct bcm2835_host *host) -+{ -+ struct mmc_data *data; -+ -+ BUG_ON(host->cmd); -+ BUG_ON(!host->data); -+ BUG_ON(!host->data_complete); -+ -+ data = host->data; -+ host->data = NULL; -+ -+ log_event("TCM<", (u32)data, data->error); -+ pr_debug("transfer_complete(error %d, stop %d)\n", -+ data->error, data->stop ? 1 : 0); -+ -+ /* -+ * Need to send CMD12 if - -+ * a) open-ended multiblock transfer (no CMD23) -+ * b) error in multiblock transfer -+ */ -+ if (host->mrq->stop && (data->error || !host->use_sbc)) { -+ if (bcm2835_sdhost_send_command(host, host->mrq->stop)) { -+ /* No busy, so poll for completion */ -+ if (!host->use_busy) -+ bcm2835_sdhost_finish_command(host, NULL); -+ -+ if (host->delay_after_this_stop) -+ do_gettimeofday(&host->stop_time); -+ } -+ } else { -+ bcm2835_sdhost_wait_transfer_complete(host); -+ tasklet_schedule(&host->finish_tasklet); -+ } -+ log_event("TCM>", (u32)data, 0); -+} -+ -+/* If irq_flags is valid, the caller is in a thread context and is allowed -+ to sleep */ -+static void bcm2835_sdhost_finish_command(struct bcm2835_host *host, -+ unsigned long *irq_flags) -+{ -+ u32 sdcmd; -+ u32 retries; -+#ifdef DEBUG -+ struct timeval before, after; -+ int timediff = 0; -+#endif -+ -+ log_event("FCM<", (u32)host->mrq, (u32)host->cmd); -+ pr_debug("finish_command(%x)\n", bcm2835_sdhost_read(host, SDCMD)); -+ -+ BUG_ON(!host->cmd || !host->mrq); -+ -+ /* Poll quickly at first */ -+ -+ retries = host->cmd_quick_poll_retries; -+ if (!retries) { -+ /* Work out how many polls take 1us by timing 10us */ -+ struct timeval start, now; -+ int us_diff; -+ -+ retries = 1; -+ do { -+ int i; -+ -+ retries *= 2; -+ -+ do_gettimeofday(&start); -+ -+ for (i = 0; i < retries; i++) { -+ cpu_relax(); -+ sdcmd = bcm2835_sdhost_read(host, SDCMD); -+ } -+ -+ do_gettimeofday(&now); -+ us_diff = (now.tv_sec - start.tv_sec) * 1000000 + -+ (now.tv_usec - start.tv_usec); -+ } while (us_diff < 10); -+ -+ host->cmd_quick_poll_retries = ((retries * us_diff + 9)*CMD_DALLY_US)/10 + 1; -+ retries = 1; // We've already waited long enough this time -+ } -+ -+ for (sdcmd = bcm2835_sdhost_read(host, SDCMD); -+ (sdcmd & SDCMD_NEW_FLAG) && retries; -+ retries--) { -+ cpu_relax(); -+ sdcmd = bcm2835_sdhost_read(host, SDCMD); -+ } -+ -+ if (!retries) { -+ unsigned long wait_max; -+ -+ if (!irq_flags) { -+ /* Schedule the work */ -+ log_event("CWWQ", 0, 0); -+ schedule_work(&host->cmd_wait_wq); -+ return; -+ } -+ -+ /* Wait max 100 ms */ -+ wait_max = jiffies + msecs_to_jiffies(100); -+ while (time_before(jiffies, wait_max)) { -+ spin_unlock_irqrestore(&host->lock, *irq_flags); -+ usleep_range(1, 10); -+ spin_lock_irqsave(&host->lock, *irq_flags); -+ sdcmd = bcm2835_sdhost_read(host, SDCMD); -+ if (!(sdcmd & SDCMD_NEW_FLAG)) -+ break; -+ } -+ } -+ -+ /* Check for errors */ -+ if (sdcmd & SDCMD_NEW_FLAG) { -+ if (host->debug) { -+ pr_err("%s: command %d never completed.\n", -+ mmc_hostname(host->mmc), host->cmd->opcode); -+ bcm2835_sdhost_dumpregs(host); -+ } -+ host->cmd->error = -EILSEQ; -+ tasklet_schedule(&host->finish_tasklet); -+ return; -+ } else if (sdcmd & SDCMD_FAIL_FLAG) { -+ u32 sdhsts = bcm2835_sdhost_read(host, SDHSTS); -+ -+ /* Clear the errors */ -+ bcm2835_sdhost_write(host, SDHSTS_ERROR_MASK, SDHSTS); -+ -+ if (host->debug) -+ pr_info("%s: error detected - CMD %x, HSTS %03x, EDM %x\n", -+ mmc_hostname(host->mmc), sdcmd, sdhsts, -+ bcm2835_sdhost_read(host, SDEDM)); -+ -+ if ((sdhsts & SDHSTS_CRC7_ERROR) && -+ (host->cmd->opcode == 1)) { -+ if (host->debug) -+ pr_info("%s: ignoring CRC7 error for CMD1\n", -+ mmc_hostname(host->mmc)); -+ } else { -+ if (sdhsts & SDHSTS_CMD_TIME_OUT) { -+ if (host->debug) -+ pr_warn("%s: command %d timeout\n", -+ mmc_hostname(host->mmc), -+ host->cmd->opcode); -+ host->cmd->error = -ETIMEDOUT; -+ } else { -+ pr_warn("%s: unexpected command %d error\n", -+ mmc_hostname(host->mmc), -+ host->cmd->opcode); -+ host->cmd->error = -EILSEQ; -+ } -+ tasklet_schedule(&host->finish_tasklet); -+ return; -+ } -+ } -+ -+ if (host->cmd->flags & MMC_RSP_PRESENT) { -+ if (host->cmd->flags & MMC_RSP_136) { -+ int i; -+ for (i = 0; i < 4; i++) -+ host->cmd->resp[3 - i] = bcm2835_sdhost_read(host, SDRSP0 + i*4); -+ pr_debug("%s: finish_command %08x %08x %08x %08x\n", -+ mmc_hostname(host->mmc), -+ host->cmd->resp[0], host->cmd->resp[1], host->cmd->resp[2], host->cmd->resp[3]); -+ log_event("RSP ", host->cmd->resp[0], host->cmd->resp[1]); -+ } else { -+ host->cmd->resp[0] = bcm2835_sdhost_read(host, SDRSP0); -+ pr_debug("%s: finish_command %08x\n", -+ mmc_hostname(host->mmc), -+ host->cmd->resp[0]); -+ log_event("RSP ", host->cmd->resp[0], 0); -+ } -+ } -+ -+ if (host->cmd == host->mrq->sbc) { -+ /* Finished CMD23, now send actual command. */ -+ host->cmd = NULL; -+ if (bcm2835_sdhost_send_command(host, host->mrq->cmd)) { -+ if (host->data && host->dma_desc) -+ /* DMA transfer starts now, PIO starts after irq */ -+ bcm2835_sdhost_start_dma(host); -+ -+ if (!host->use_busy) -+ bcm2835_sdhost_finish_command(host, NULL); -+ } -+ } else if (host->cmd == host->mrq->stop) { -+ /* Finished CMD12 */ -+ tasklet_schedule(&host->finish_tasklet); -+ } else { -+ /* Processed actual command. */ -+ host->cmd = NULL; -+ if (!host->data) -+ tasklet_schedule(&host->finish_tasklet); -+ else if (host->data_complete) -+ bcm2835_sdhost_transfer_complete(host); -+ } -+ log_event("FCM>", (u32)host->mrq, (u32)host->cmd); -+} -+ -+static void bcm2835_sdhost_timeout(unsigned long data) -+{ -+ struct bcm2835_host *host; -+ unsigned long flags; -+ -+ host = (struct bcm2835_host *)data; -+ -+ spin_lock_irqsave(&host->lock, flags); -+ log_event("TIM<", 0, 0); -+ -+ if (host->mrq) { -+ pr_err("%s: timeout waiting for hardware interrupt.\n", -+ mmc_hostname(host->mmc)); -+ log_dump(); -+ bcm2835_sdhost_dumpregs(host); -+ -+ if (host->data) { -+ host->data->error = -ETIMEDOUT; -+ bcm2835_sdhost_finish_data(host); -+ } else { -+ if (host->cmd) -+ host->cmd->error = -ETIMEDOUT; -+ else -+ host->mrq->cmd->error = -ETIMEDOUT; -+ -+ pr_debug("timeout_timer tasklet_schedule\n"); -+ tasklet_schedule(&host->finish_tasklet); -+ } -+ } -+ -+ mmiowb(); -+ spin_unlock_irqrestore(&host->lock, flags); -+} -+ -+static void bcm2835_sdhost_busy_irq(struct bcm2835_host *host, u32 intmask) -+{ -+ log_event("IRQB", (u32)host->cmd, intmask); -+ if (!host->cmd) { -+ pr_err("%s: got command busy interrupt 0x%08x even " -+ "though no command operation was in progress.\n", -+ mmc_hostname(host->mmc), (unsigned)intmask); -+ bcm2835_sdhost_dumpregs(host); -+ return; -+ } -+ -+ if (!host->use_busy) { -+ pr_err("%s: got command busy interrupt 0x%08x even " -+ "though not expecting one.\n", -+ mmc_hostname(host->mmc), (unsigned)intmask); -+ bcm2835_sdhost_dumpregs(host); -+ return; -+ } -+ host->use_busy = 0; -+ -+ if (intmask & SDHSTS_ERROR_MASK) -+ { -+ pr_err("sdhost_busy_irq: intmask %x, data %p\n", intmask, host->mrq->data); -+ if (intmask & SDHSTS_CRC7_ERROR) -+ host->cmd->error = -EILSEQ; -+ else if (intmask & (SDHSTS_CRC16_ERROR | -+ SDHSTS_FIFO_ERROR)) { -+ if (host->mrq->data) -+ host->mrq->data->error = -EILSEQ; -+ else -+ host->cmd->error = -EILSEQ; -+ } else if (intmask & SDHSTS_REW_TIME_OUT) { -+ if (host->mrq->data) -+ host->mrq->data->error = -ETIMEDOUT; -+ else -+ host->cmd->error = -ETIMEDOUT; -+ } else if (intmask & SDHSTS_CMD_TIME_OUT) -+ host->cmd->error = -ETIMEDOUT; -+ -+ if (host->debug) { -+ log_dump(); -+ bcm2835_sdhost_dumpregs(host); -+ } -+ } -+ else -+ bcm2835_sdhost_finish_command(host, NULL); -+} -+ -+static void bcm2835_sdhost_data_irq(struct bcm2835_host *host, u32 intmask) -+{ -+ /* There are no dedicated data/space available interrupt -+ status bits, so it is necessary to use the single shared -+ data/space available FIFO status bits. It is therefore not -+ an error to get here when there is no data transfer in -+ progress. */ -+ log_event("IRQD", (u32)host->data, intmask); -+ if (!host->data) -+ return; -+ -+ if (intmask & (SDHSTS_CRC16_ERROR | -+ SDHSTS_FIFO_ERROR | -+ SDHSTS_REW_TIME_OUT)) { -+ if (intmask & (SDHSTS_CRC16_ERROR | -+ SDHSTS_FIFO_ERROR)) -+ host->data->error = -EILSEQ; -+ else -+ host->data->error = -ETIMEDOUT; -+ -+ if (host->debug) { -+ log_dump(); -+ bcm2835_sdhost_dumpregs(host); -+ } -+ } -+ -+ if (host->data->error) { -+ bcm2835_sdhost_finish_data(host); -+ } else if (host->data->flags & MMC_DATA_WRITE) { -+ /* Use the block interrupt for writes after the first block */ -+ host->hcfg &= ~(SDHCFG_DATA_IRPT_EN); -+ host->hcfg |= SDHCFG_BLOCK_IRPT_EN; -+ bcm2835_sdhost_write(host, host->hcfg, SDHCFG); -+ bcm2835_sdhost_transfer_pio(host); -+ } else { -+ bcm2835_sdhost_transfer_pio(host); -+ host->blocks--; -+ if ((host->blocks == 0) || host->data->error) -+ bcm2835_sdhost_finish_data(host); -+ } -+} -+ -+static void bcm2835_sdhost_block_irq(struct bcm2835_host *host, u32 intmask) -+{ -+ log_event("IRQK", (u32)host->data, intmask); -+ if (!host->data) { -+ pr_err("%s: got block interrupt 0x%08x even " -+ "though no data operation was in progress.\n", -+ mmc_hostname(host->mmc), (unsigned)intmask); -+ bcm2835_sdhost_dumpregs(host); -+ return; -+ } -+ -+ if (intmask & (SDHSTS_CRC16_ERROR | -+ SDHSTS_FIFO_ERROR | -+ SDHSTS_REW_TIME_OUT)) { -+ if (intmask & (SDHSTS_CRC16_ERROR | -+ SDHSTS_FIFO_ERROR)) -+ host->data->error = -EILSEQ; -+ else -+ host->data->error = -ETIMEDOUT; -+ -+ if (host->debug) { -+ log_dump(); -+ bcm2835_sdhost_dumpregs(host); -+ } -+ } -+ -+ if (!host->dma_desc) { -+ BUG_ON(!host->blocks); -+ if (host->data->error || (--host->blocks == 0)) { -+ bcm2835_sdhost_finish_data(host); -+ } else { -+ bcm2835_sdhost_transfer_pio(host); -+ } -+ } else if (host->data->flags & MMC_DATA_WRITE) { -+ bcm2835_sdhost_finish_data(host); -+ } -+} -+ -+static irqreturn_t bcm2835_sdhost_irq(int irq, void *dev_id) -+{ -+ irqreturn_t result = IRQ_NONE; -+ struct bcm2835_host *host = dev_id; -+ u32 intmask; -+ -+ spin_lock(&host->lock); -+ -+ intmask = bcm2835_sdhost_read(host, SDHSTS); -+ log_event("IRQ<", intmask, 0); -+ -+ bcm2835_sdhost_write(host, -+ SDHSTS_BUSY_IRPT | -+ SDHSTS_BLOCK_IRPT | -+ SDHSTS_SDIO_IRPT | -+ SDHSTS_DATA_FLAG, -+ SDHSTS); -+ -+ if (intmask & SDHSTS_BLOCK_IRPT) { -+ bcm2835_sdhost_block_irq(host, intmask); -+ result = IRQ_HANDLED; -+ } -+ -+ if (intmask & SDHSTS_BUSY_IRPT) { -+ bcm2835_sdhost_busy_irq(host, intmask); -+ result = IRQ_HANDLED; -+ } -+ -+ /* There is no true data interrupt status bit, so it is -+ necessary to qualify the data flag with the interrupt -+ enable bit */ -+ if ((intmask & SDHSTS_DATA_FLAG) && -+ (host->hcfg & SDHCFG_DATA_IRPT_EN)) { -+ bcm2835_sdhost_data_irq(host, intmask); -+ result = IRQ_HANDLED; -+ } -+ -+ mmiowb(); -+ -+ log_event("IRQ>", bcm2835_sdhost_read(host, SDHSTS), 0); -+ spin_unlock(&host->lock); -+ -+ return result; -+} -+ -+void bcm2835_sdhost_set_clock(struct bcm2835_host *host, unsigned int clock) -+{ -+ int div = 0; /* Initialized for compiler warning */ -+ unsigned int input_clock = clock; -+ unsigned long flags; -+ -+ if (host->debug) -+ pr_info("%s: set_clock(%d)\n", mmc_hostname(host->mmc), clock); -+ -+ if ((host->overclock_50 > 50) && -+ (clock == 50*MHZ)) -+ clock = host->overclock_50 * MHZ + (MHZ - 1); -+ -+ /* The SDCDIV register has 11 bits, and holds (div - 2). -+ But in data mode the max is 50MHz wihout a minimum, and only the -+ bottom 3 bits are used. Since the switch over is automatic (unless -+ we have marked the card as slow...), chosen values have to make -+ sense in both modes. -+ Ident mode must be 100-400KHz, so can range check the requested -+ clock. CMD15 must be used to return to data mode, so this can be -+ monitored. -+ -+ clock 250MHz -> 0->125MHz, 1->83.3MHz, 2->62.5MHz, 3->50.0MHz -+ 4->41.7MHz, 5->35.7MHz, 6->31.3MHz, 7->27.8MHz -+ -+ 623->400KHz/27.8MHz -+ reset value (507)->491159/50MHz -+ -+ BUT, the 3-bit clock divisor in data mode is too small if the -+ core clock is higher than 250MHz, so instead use the SLOW_CARD -+ configuration bit to force the use of the ident clock divisor -+ at all times. -+ */ -+ -+ host->mmc->actual_clock = 0; -+ -+ if (host->firmware_sets_cdiv) { -+ u32 msg[3] = { clock, 0, 0 }; -+ -+ rpi_firmware_property(rpi_firmware_get(NULL), -+ RPI_FIRMWARE_SET_SDHOST_CLOCK, -+ &msg, sizeof(msg)); -+ -+ clock = max(msg[1], msg[2]); -+ spin_lock_irqsave(&host->lock, flags); -+ } else { -+ spin_lock_irqsave(&host->lock, flags); -+ if (clock < 100000) { -+ /* Can't stop the clock, but make it as slow as -+ * possible to show willing -+ */ -+ host->cdiv = SDCDIV_MAX_CDIV; -+ bcm2835_sdhost_write(host, host->cdiv, SDCDIV); -+ mmiowb(); -+ spin_unlock_irqrestore(&host->lock, flags); -+ return; -+ } -+ -+ div = host->max_clk / clock; -+ if (div < 2) -+ div = 2; -+ if ((host->max_clk / div) > clock) -+ div++; -+ div -= 2; -+ -+ if (div > SDCDIV_MAX_CDIV) -+ div = SDCDIV_MAX_CDIV; -+ -+ clock = host->max_clk / (div + 2); -+ -+ host->cdiv = div; -+ bcm2835_sdhost_write(host, host->cdiv, SDCDIV); -+ -+ if (host->debug) -+ pr_info("%s: clock=%d -> max_clk=%d, cdiv=%x " -+ "(actual clock %d)\n", -+ mmc_hostname(host->mmc), input_clock, -+ host->max_clk, host->cdiv, -+ clock); -+ } -+ -+ /* Calibrate some delays */ -+ -+ host->ns_per_fifo_word = (1000000000/clock) * -+ ((host->mmc->caps & MMC_CAP_4_BIT_DATA) ? 8 : 32); -+ -+ if (input_clock == 50 * MHZ) { -+ if (clock > input_clock) { -+ /* Save the closest value, to make it easier -+ to reduce in the event of error */ -+ host->overclock_50 = (clock/MHZ); -+ -+ if (clock != host->overclock) { -+ pr_info("%s: overclocking to %dHz\n", -+ mmc_hostname(host->mmc), clock); -+ host->overclock = clock; -+ } -+ } else if (host->overclock) { -+ host->overclock = 0; -+ if (clock == 50 * MHZ) -+ pr_warn("%s: cancelling overclock\n", -+ mmc_hostname(host->mmc)); -+ } -+ } else if (input_clock == 0) { -+ /* Reset the preferred overclock when the clock is stopped. -+ * This always happens during initialisation. */ -+ host->overclock_50 = host->user_overclock_50; -+ host->overclock = 0; -+ } -+ -+ /* Set the timeout to 500ms */ -+ bcm2835_sdhost_write(host, clock/2, SDTOUT); -+ -+ host->mmc->actual_clock = clock; -+ host->clock = input_clock; -+ host->reset_clock = 0; -+ -+ mmiowb(); -+ spin_unlock_irqrestore(&host->lock, flags); -+} -+ -+static void bcm2835_sdhost_request(struct mmc_host *mmc, struct mmc_request *mrq) -+{ -+ struct bcm2835_host *host; -+ unsigned long flags; -+ u32 edm, fsm; -+ -+ host = mmc_priv(mmc); -+ -+ if (host->debug) { -+ struct mmc_command *cmd = mrq->cmd; -+ BUG_ON(!cmd); -+ if (cmd->data) -+ pr_info("%s: cmd %d 0x%x (flags 0x%x) - %s %d*%d\n", -+ mmc_hostname(mmc), -+ cmd->opcode, cmd->arg, cmd->flags, -+ (cmd->data->flags & MMC_DATA_READ) ? -+ "read" : "write", cmd->data->blocks, -+ cmd->data->blksz); -+ else -+ pr_info("%s: cmd %d 0x%x (flags 0x%x)\n", -+ mmc_hostname(mmc), -+ cmd->opcode, cmd->arg, cmd->flags); -+ } -+ -+ /* Reset the error statuses in case this is a retry */ -+ if (mrq->sbc) -+ mrq->sbc->error = 0; -+ if (mrq->cmd) -+ mrq->cmd->error = 0; -+ if (mrq->data) -+ mrq->data->error = 0; -+ if (mrq->stop) -+ mrq->stop->error = 0; -+ -+ if (mrq->data && !is_power_of_2(mrq->data->blksz)) { -+ pr_err("%s: unsupported block size (%d bytes)\n", -+ mmc_hostname(mmc), mrq->data->blksz); -+ mrq->cmd->error = -EINVAL; -+ mmc_request_done(mmc, mrq); -+ return; -+ } -+ -+ if (host->use_dma && mrq->data && -+ (mrq->data->blocks > host->pio_limit)) -+ bcm2835_sdhost_prepare_dma(host, mrq->data); -+ -+ if (host->reset_clock) -+ bcm2835_sdhost_set_clock(host, host->clock); -+ -+ spin_lock_irqsave(&host->lock, flags); -+ -+ WARN_ON(host->mrq != NULL); -+ host->mrq = mrq; -+ -+ edm = bcm2835_sdhost_read(host, SDEDM); -+ fsm = edm & SDEDM_FSM_MASK; -+ -+ log_event("REQ<", (u32)mrq, edm); -+ if ((fsm != SDEDM_FSM_IDENTMODE) && -+ (fsm != SDEDM_FSM_DATAMODE)) { -+ log_event("REQ!", (u32)mrq, edm); -+ if (host->debug) { -+ pr_warn("%s: previous command (%d) not complete (EDM %x)\n", -+ mmc_hostname(host->mmc), -+ bcm2835_sdhost_read(host, SDCMD) & SDCMD_CMD_MASK, -+ edm); -+ log_dump(); -+ bcm2835_sdhost_dumpregs(host); -+ } -+ mrq->cmd->error = -EILSEQ; -+ tasklet_schedule(&host->finish_tasklet); -+ mmiowb(); -+ spin_unlock_irqrestore(&host->lock, flags); -+ return; -+ } -+ -+ host->use_sbc = !!mrq->sbc && -+ (host->mrq->data->flags & USE_CMD23_FLAGS); -+ if (host->use_sbc) { -+ if (bcm2835_sdhost_send_command(host, mrq->sbc)) { -+ if (!host->use_busy) -+ bcm2835_sdhost_finish_command(host, &flags); -+ } -+ } else if (bcm2835_sdhost_send_command(host, mrq->cmd)) { -+ if (host->data && host->dma_desc) -+ /* DMA transfer starts now, PIO starts after irq */ -+ bcm2835_sdhost_start_dma(host); -+ -+ if (!host->use_busy) -+ bcm2835_sdhost_finish_command(host, &flags); -+ } -+ -+ log_event("CMD ", (u32)mrq->cmd->opcode, -+ mrq->data ? (u32)mrq->data->blksz : 0); -+ mmiowb(); -+ -+ log_event("REQ>", (u32)mrq, 0); -+ spin_unlock_irqrestore(&host->lock, flags); -+} -+ -+static void bcm2835_sdhost_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) -+{ -+ -+ struct bcm2835_host *host = mmc_priv(mmc); -+ unsigned long flags; -+ -+ if (host->debug) -+ pr_info("%s: ios clock %d, pwr %d, bus_width %d, " -+ "timing %d, vdd %d, drv_type %d\n", -+ mmc_hostname(mmc), -+ ios->clock, ios->power_mode, ios->bus_width, -+ ios->timing, ios->signal_voltage, ios->drv_type); -+ -+ spin_lock_irqsave(&host->lock, flags); -+ -+ log_event("IOS<", ios->clock, 0); -+ -+ /* set bus width */ -+ host->hcfg &= ~SDHCFG_WIDE_EXT_BUS; -+ if (ios->bus_width == MMC_BUS_WIDTH_4) -+ host->hcfg |= SDHCFG_WIDE_EXT_BUS; -+ -+ host->hcfg |= SDHCFG_WIDE_INT_BUS; -+ -+ /* Disable clever clock switching, to cope with fast core clocks */ -+ host->hcfg |= SDHCFG_SLOW_CARD; -+ -+ bcm2835_sdhost_write(host, host->hcfg, SDHCFG); -+ -+ mmiowb(); -+ -+ spin_unlock_irqrestore(&host->lock, flags); -+ -+ if (!ios->clock || ios->clock != host->clock) -+ bcm2835_sdhost_set_clock(host, ios->clock); -+} -+ -+static struct mmc_host_ops bcm2835_sdhost_ops = { -+ .request = bcm2835_sdhost_request, -+ .set_ios = bcm2835_sdhost_set_ios, -+ .hw_reset = bcm2835_sdhost_reset, -+}; -+ -+static void bcm2835_sdhost_cmd_wait_work(struct work_struct *work) -+{ -+ struct bcm2835_host *host; -+ unsigned long flags; -+ -+ host = container_of(work, struct bcm2835_host, cmd_wait_wq); -+ -+ spin_lock_irqsave(&host->lock, flags); -+ -+ log_event("CWK<", (u32)host->cmd, (u32)host->mrq); -+ -+ /* -+ * If this tasklet gets rescheduled while running, it will -+ * be run again afterwards but without any active request. -+ */ -+ if (!host->mrq) { -+ spin_unlock_irqrestore(&host->lock, flags); -+ return; -+ } -+ -+ bcm2835_sdhost_finish_command(host, &flags); -+ -+ mmiowb(); -+ -+ log_event("CWK>", (u32)host->cmd, 0); -+ -+ spin_unlock_irqrestore(&host->lock, flags); -+} -+ -+static void bcm2835_sdhost_tasklet_finish(unsigned long param) -+{ -+ struct bcm2835_host *host; -+ unsigned long flags; -+ struct mmc_request *mrq; -+ struct dma_chan *terminate_chan = NULL; -+ -+ host = (struct bcm2835_host *)param; -+ -+ spin_lock_irqsave(&host->lock, flags); -+ -+ log_event("TSK<", (u32)host->mrq, 0); -+ /* -+ * If this tasklet gets rescheduled while running, it will -+ * be run again afterwards but without any active request. -+ */ -+ if (!host->mrq) { -+ spin_unlock_irqrestore(&host->lock, flags); -+ return; -+ } -+ -+ del_timer(&host->timer); -+ -+ mrq = host->mrq; -+ -+ /* Drop the overclock after any data corruption, or after any -+ * error while overclocked. Ignore errors for status commands, -+ * as they are likely when a card is ejected. */ -+ if (host->overclock) { -+ if ((mrq->cmd && mrq->cmd->error && -+ (mrq->cmd->opcode != MMC_SEND_STATUS)) || -+ (mrq->data && mrq->data->error) || -+ (mrq->stop && mrq->stop->error) || -+ (mrq->sbc && mrq->sbc->error)) { -+ host->overclock_50--; -+ pr_warn("%s: reducing overclock due to errors\n", -+ mmc_hostname(host->mmc)); -+ host->reset_clock = 1; -+ mrq->cmd->error = -ETIMEDOUT; -+ mrq->cmd->retries = 1; -+ } -+ } -+ -+ host->mrq = NULL; -+ host->cmd = NULL; -+ host->data = NULL; -+ -+ mmiowb(); -+ -+ host->dma_desc = NULL; -+ terminate_chan = host->dma_chan; -+ host->dma_chan = NULL; -+ -+ spin_unlock_irqrestore(&host->lock, flags); -+ -+ if (terminate_chan) -+ { -+ int err = dmaengine_terminate_all(terminate_chan); -+ if (err) -+ pr_err("%s: failed to terminate DMA (%d)\n", -+ mmc_hostname(host->mmc), err); -+ } -+ -+ /* The SDHOST block doesn't report any errors for a disconnected -+ interface. All cards and SDIO devices should report some supported -+ voltage range, so a zero response to SEND_OP_COND, IO_SEND_OP_COND -+ or APP_SEND_OP_COND can be treated as an error. */ -+ if (((mrq->cmd->opcode == MMC_SEND_OP_COND) || -+ (mrq->cmd->opcode == SD_IO_SEND_OP_COND) || -+ (mrq->cmd->opcode == SD_APP_OP_COND)) && -+ (mrq->cmd->error == 0) && -+ (mrq->cmd->resp[0] == 0)) { -+ mrq->cmd->error = -ETIMEDOUT; -+ if (host->debug) -+ pr_info("%s: faking timeout due to zero OCR\n", -+ mmc_hostname(host->mmc)); -+ } -+ -+ mmc_request_done(host->mmc, mrq); -+ log_event("TSK>", (u32)mrq, 0); -+} -+ -+int bcm2835_sdhost_add_host(struct bcm2835_host *host) -+{ -+ struct mmc_host *mmc; -+ struct dma_slave_config cfg; -+ char pio_limit_string[20]; -+ int ret; -+ -+ mmc = host->mmc; -+ -+ mmc->f_max = host->max_clk; -+ mmc->f_min = host->max_clk / SDCDIV_MAX_CDIV; -+ -+ mmc->max_busy_timeout = (~(unsigned int)0)/(mmc->f_max/1000); -+ -+ pr_debug("f_max %d, f_min %d, max_busy_timeout %d\n", -+ mmc->f_max, mmc->f_min, mmc->max_busy_timeout); -+ -+ /* host controller capabilities */ -+ mmc->caps |= -+ MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED | -+ MMC_CAP_NEEDS_POLL | MMC_CAP_HW_RESET | MMC_CAP_ERASE | -+ ((ALLOW_CMD23_READ|ALLOW_CMD23_WRITE) * MMC_CAP_CMD23); -+ -+ spin_lock_init(&host->lock); -+ -+ if (host->allow_dma) { -+ if (IS_ERR_OR_NULL(host->dma_chan_rxtx)) { -+ pr_err("%s: unable to initialise DMA channel. " -+ "Falling back to PIO\n", -+ mmc_hostname(mmc)); -+ host->use_dma = false; -+ } else { -+ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; -+ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; -+ cfg.slave_id = 13; /* DREQ channel */ -+ -+ /* Validate the slave configurations */ -+ -+ cfg.direction = DMA_MEM_TO_DEV; -+ cfg.src_addr = 0; -+ cfg.dst_addr = host->bus_addr + SDDATA; -+ -+ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); -+ -+ if (ret == 0) { -+ host->dma_cfg_tx = cfg; -+ -+ cfg.direction = DMA_DEV_TO_MEM; -+ cfg.src_addr = host->bus_addr + SDDATA; -+ cfg.dst_addr = 0; -+ -+ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); -+ } -+ -+ if (ret == 0) { -+ host->dma_cfg_rx = cfg; -+ -+ host->use_dma = true; -+ } else { -+ pr_err("%s: unable to configure DMA channel. " -+ "Falling back to PIO\n", -+ mmc_hostname(mmc)); -+ dma_release_channel(host->dma_chan_rxtx); -+ host->dma_chan_rxtx = NULL; -+ host->use_dma = false; -+ } -+ } -+ } else { -+ host->use_dma = false; -+ } -+ -+ mmc->max_segs = 128; -+ mmc->max_req_size = 524288; -+ mmc->max_seg_size = mmc->max_req_size; -+ mmc->max_blk_size = 512; -+ mmc->max_blk_count = 65535; -+ -+ /* report supported voltage ranges */ -+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; -+ -+ tasklet_init(&host->finish_tasklet, -+ bcm2835_sdhost_tasklet_finish, (unsigned long)host); -+ -+ INIT_WORK(&host->cmd_wait_wq, bcm2835_sdhost_cmd_wait_work); -+ -+ setup_timer(&host->timer, bcm2835_sdhost_timeout, -+ (unsigned long)host); -+ -+ bcm2835_sdhost_init(host, 0); -+ -+ ret = request_irq(host->irq, bcm2835_sdhost_irq, 0 /*IRQF_SHARED*/, -+ mmc_hostname(mmc), host); -+ if (ret) { -+ pr_err("%s: failed to request IRQ %d: %d\n", -+ mmc_hostname(mmc), host->irq, ret); -+ goto untasklet; -+ } -+ -+ mmiowb(); -+ mmc_add_host(mmc); -+ -+ pio_limit_string[0] = '\0'; -+ if (host->use_dma && (host->pio_limit > 0)) -+ sprintf(pio_limit_string, " (>%d)", host->pio_limit); -+ pr_info("%s: %s loaded - DMA %s%s\n", -+ mmc_hostname(mmc), DRIVER_NAME, -+ host->use_dma ? "enabled" : "disabled", -+ pio_limit_string); -+ -+ return 0; -+ -+untasklet: -+ tasklet_kill(&host->finish_tasklet); -+ -+ return ret; -+} -+ -+static int bcm2835_sdhost_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct device_node *node = dev->of_node; -+ struct clk *clk; -+ struct resource *iomem; -+ struct bcm2835_host *host; -+ struct mmc_host *mmc; -+ const __be32 *addr; -+ u32 msg[3]; -+ int ret; -+ -+ pr_debug("bcm2835_sdhost_probe\n"); -+ mmc = mmc_alloc_host(sizeof(*host), dev); -+ if (!mmc) -+ return -ENOMEM; -+ -+ mmc->ops = &bcm2835_sdhost_ops; -+ host = mmc_priv(mmc); -+ host->mmc = mmc; -+ host->pio_timeout = msecs_to_jiffies(500); -+ host->pio_limit = 1; -+ host->max_delay = 1; /* Warn if over 1ms */ -+ host->allow_dma = 1; -+ spin_lock_init(&host->lock); -+ -+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ host->ioaddr = devm_ioremap_resource(dev, iomem); -+ if (IS_ERR(host->ioaddr)) { -+ ret = PTR_ERR(host->ioaddr); -+ goto err; -+ } -+ -+ addr = of_get_address(node, 0, NULL, NULL); -+ if (!addr) { -+ dev_err(dev, "could not get DMA-register address\n"); -+ return -ENODEV; -+ } -+ host->bus_addr = be32_to_cpup(addr); -+ pr_debug(" - ioaddr %lx, iomem->start %lx, bus_addr %lx\n", -+ (unsigned long)host->ioaddr, -+ (unsigned long)iomem->start, -+ (unsigned long)host->bus_addr); -+ -+ if (node) { -+ /* Read any custom properties */ -+ of_property_read_u32(node, -+ "brcm,delay-after-stop", -+ &host->delay_after_stop); -+ of_property_read_u32(node, -+ "brcm,overclock-50", -+ &host->user_overclock_50); -+ of_property_read_u32(node, -+ "brcm,pio-limit", -+ &host->pio_limit); -+ host->allow_dma = -+ !of_property_read_bool(node, "brcm,force-pio"); -+ host->debug = of_property_read_bool(node, "brcm,debug"); -+ } -+ -+ host->dma_chan = NULL; -+ host->dma_desc = NULL; -+ -+ /* Formally recognise the other way of disabling DMA */ -+ if (host->pio_limit == 0x7fffffff) -+ host->allow_dma = false; -+ -+ if (host->allow_dma) { -+ if (node) { -+ host->dma_chan_rxtx = -+ dma_request_slave_channel(dev, "rx-tx"); -+ if (!host->dma_chan_rxtx) -+ host->dma_chan_rxtx = -+ dma_request_slave_channel(dev, "tx"); -+ if (!host->dma_chan_rxtx) -+ host->dma_chan_rxtx = -+ dma_request_slave_channel(dev, "rx"); -+ } else { -+ dma_cap_mask_t mask; -+ -+ dma_cap_zero(mask); -+ /* we don't care about the channel, any would work */ -+ dma_cap_set(DMA_SLAVE, mask); -+ host->dma_chan_rxtx = -+ dma_request_channel(mask, NULL, NULL); -+ } -+ } -+ -+ clk = devm_clk_get(dev, NULL); -+ if (IS_ERR(clk)) { -+ ret = PTR_ERR(clk); -+ if (ret == -EPROBE_DEFER) -+ dev_info(dev, "could not get clk, deferring probe\n"); -+ else -+ dev_err(dev, "could not get clk\n"); -+ goto err; -+ } -+ -+ host->max_clk = clk_get_rate(clk); -+ -+ host->irq = platform_get_irq(pdev, 0); -+ if (host->irq <= 0) { -+ dev_err(dev, "get IRQ failed\n"); -+ ret = -EINVAL; -+ goto err; -+ } -+ -+ pr_debug(" - max_clk %lx, irq %d\n", -+ (unsigned long)host->max_clk, -+ (int)host->irq); -+ -+ log_init(dev, iomem->start - host->bus_addr); -+ -+ if (node) -+ mmc_of_parse(mmc); -+ else -+ mmc->caps |= MMC_CAP_4_BIT_DATA; -+ -+ msg[0] = 0; -+ msg[1] = ~0; -+ msg[2] = ~0; -+ -+ rpi_firmware_property(rpi_firmware_get(NULL), -+ RPI_FIRMWARE_SET_SDHOST_CLOCK, -+ &msg, sizeof(msg)); -+ -+ host->firmware_sets_cdiv = (msg[1] != ~0); -+ -+ ret = bcm2835_sdhost_add_host(host); -+ if (ret) -+ goto err; -+ -+ platform_set_drvdata(pdev, host); -+ -+ pr_debug("bcm2835_sdhost_probe -> OK\n"); -+ -+ return 0; -+ -+err: -+ pr_debug("bcm2835_sdhost_probe -> err %d\n", ret); -+ mmc_free_host(mmc); -+ -+ return ret; -+} -+ -+static int bcm2835_sdhost_remove(struct platform_device *pdev) -+{ -+ struct bcm2835_host *host = platform_get_drvdata(pdev); -+ -+ pr_debug("bcm2835_sdhost_remove\n"); -+ -+ mmc_remove_host(host->mmc); -+ -+ bcm2835_sdhost_set_power(host, false); -+ -+ free_irq(host->irq, host); -+ -+ del_timer_sync(&host->timer); -+ -+ tasklet_kill(&host->finish_tasklet); -+ -+ mmc_free_host(host->mmc); -+ platform_set_drvdata(pdev, NULL); -+ -+ pr_debug("bcm2835_sdhost_remove - OK\n"); -+ return 0; -+} -+ -+static const struct of_device_id bcm2835_sdhost_match[] = { -+ { .compatible = "brcm,bcm2835-sdhost" }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, bcm2835_sdhost_match); -+ -+static struct platform_driver bcm2835_sdhost_driver = { -+ .probe = bcm2835_sdhost_probe, -+ .remove = bcm2835_sdhost_remove, -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = bcm2835_sdhost_match, -+ }, -+}; -+module_platform_driver(bcm2835_sdhost_driver); -+ -+MODULE_ALIAS("platform:sdhost-bcm2835"); -+MODULE_DESCRIPTION("BCM2835 SDHost driver"); -+MODULE_LICENSE("GPL v2"); -+MODULE_AUTHOR("Phil Elwell"); diff --git a/target/linux/brcm2708/patches-4.9/0036-mmc-Add-MMC_QUIRK_ERASE_BROKEN-for-some-cards.patch b/target/linux/brcm2708/patches-4.9/0036-mmc-Add-MMC_QUIRK_ERASE_BROKEN-for-some-cards.patch deleted file mode 100644 index d84a0fe892de..000000000000 --- a/target/linux/brcm2708/patches-4.9/0036-mmc-Add-MMC_QUIRK_ERASE_BROKEN-for-some-cards.patch +++ /dev/null @@ -1,132 +0,0 @@ -From 6d11059a087b8101cf34a09a1e3342bb4f1576de Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 11 May 2016 12:50:33 +0100 -Subject: [PATCH] mmc: Add MMC_QUIRK_ERASE_BROKEN for some cards - -Some SD cards have been found that corrupt data when small blocks -are erased. Add a quirk to indicate that ERASE should not be used, -and set it for cards of that type. - -Signed-off-by: Phil Elwell - -mmc: Apply QUIRK_BROKEN_ERASE to other capacities - -Signed-off-by: Phil Elwell - -mmc: Add card_quirks module parameter, log quirks - -Use mmc_block.card_quirks to override the quirks for all SD or MMC -cards. The value is a bitfield using the bit positions defined in -include/linux/mmc/card.h. If the module parameter is placed in the -kernel command line (or bootargs) stored on the card then, assuming the -device only has one SD card interface, the override effectively becomes -card-specific. - -Signed-off-by: Phil Elwell ---- - drivers/mmc/card/block.c | 39 ++++++++++++++++++++++++++++++++++++--- - drivers/mmc/core/core.c | 3 ++- - include/linux/mmc/card.h | 3 +++ - 3 files changed, 41 insertions(+), 4 deletions(-) - ---- a/drivers/mmc/card/block.c -+++ b/drivers/mmc/card/block.c -@@ -135,6 +135,13 @@ enum { - module_param(perdev_minors, int, 0444); - MODULE_PARM_DESC(perdev_minors, "Minors numbers to allocate per device"); - -+/* -+ * Allow quirks to be overridden for the current card -+ */ -+static char *card_quirks; -+module_param(card_quirks, charp, 0644); -+MODULE_PARM_DESC(card_quirks, "Force the use of the indicated quirks (a bitfield)"); -+ - static inline int mmc_blk_part_switch(struct mmc_card *card, - struct mmc_blk_data *md); - static int get_card_status(struct mmc_card *card, u32 *status, int retries); -@@ -2573,6 +2580,17 @@ static const struct mmc_fixup blk_fixups - MMC_FIXUP("V10016", CID_MANFID_KINGSTON, CID_OEMID_ANY, add_quirk_mmc, - MMC_QUIRK_TRIM_BROKEN), - -+ /* -+ * On some Kingston SD cards, multiple erases of less than 64 -+ * sectors can cause corruption. -+ */ -+ MMC_FIXUP("SD16G", 0x41, 0x3432, add_quirk_mmc, -+ MMC_QUIRK_ERASE_BROKEN), -+ MMC_FIXUP("SD32G", 0x41, 0x3432, add_quirk_mmc, -+ MMC_QUIRK_ERASE_BROKEN), -+ MMC_FIXUP("SD64G", 0x41, 0x3432, add_quirk_mmc, -+ MMC_QUIRK_ERASE_BROKEN), -+ - END_FIXUP - }; - -@@ -2580,6 +2598,7 @@ static int mmc_blk_probe(struct mmc_card - { - struct mmc_blk_data *md, *part_md; - char cap_str[10]; -+ char quirk_str[24]; - - /* - * Check that the card supports the command class(es) we need. -@@ -2587,7 +2606,16 @@ static int mmc_blk_probe(struct mmc_card - if (!(card->csd.cmdclass & CCC_BLOCK_READ)) - return -ENODEV; - -- mmc_fixup_device(card, blk_fixups); -+ if (card_quirks) { -+ unsigned long quirks; -+ if (kstrtoul(card_quirks, 0, &quirks) == 0) -+ card->quirks = (unsigned int)quirks; -+ else -+ pr_err("mmc_block: Invalid card_quirks parameter '%s'\n", -+ card_quirks); -+ } -+ else -+ mmc_fixup_device(card, blk_fixups); - - md = mmc_blk_alloc(card); - if (IS_ERR(md)) -@@ -2595,9 +2623,14 @@ static int mmc_blk_probe(struct mmc_card - - string_get_size((u64)get_capacity(md->disk), 512, STRING_UNITS_2, - cap_str, sizeof(cap_str)); -- pr_info("%s: %s %s %s %s\n", -+ if (card->quirks) -+ snprintf(quirk_str, sizeof(quirk_str), -+ " (quirks 0x%08x)", card->quirks); -+ else -+ quirk_str[0] = '\0'; -+ pr_info("%s: %s %s %s%s%s\n", - md->disk->disk_name, mmc_card_id(card), mmc_card_name(card), -- cap_str, md->read_only ? "(ro)" : ""); -+ cap_str, md->read_only ? " (ro)" : "", quirk_str); - - if (mmc_blk_alloc_parts(card, md)) - goto out; ---- a/drivers/mmc/core/core.c -+++ b/drivers/mmc/core/core.c -@@ -2409,7 +2409,8 @@ EXPORT_SYMBOL(mmc_erase); - int mmc_can_erase(struct mmc_card *card) - { - if ((card->host->caps & MMC_CAP_ERASE) && -- (card->csd.cmdclass & CCC_ERASE) && card->erase_size) -+ (card->csd.cmdclass & CCC_ERASE) && card->erase_size && -+ !(card->quirks & MMC_QUIRK_ERASE_BROKEN)) - return 1; - return 0; - } ---- a/include/linux/mmc/card.h -+++ b/include/linux/mmc/card.h -@@ -283,6 +283,9 @@ struct mmc_card { - #define MMC_QUIRK_BROKEN_HPI (1<<13) /* Disable broken HPI support */ - - -+#define MMC_QUIRK_ERASE_BROKEN (1<<31) /* Skip erase */ -+ -+ - unsigned int erase_size; /* erase size in sectors */ - unsigned int erase_shift; /* if erase unit is power 2 */ - unsigned int pref_erase; /* in sectors */ diff --git a/target/linux/brcm2708/patches-4.9/0037-cma-Add-vc_cma-driver-to-enable-use-of-CMA.patch b/target/linux/brcm2708/patches-4.9/0037-cma-Add-vc_cma-driver-to-enable-use-of-CMA.patch deleted file mode 100644 index 50bad76c5171..000000000000 --- a/target/linux/brcm2708/patches-4.9/0037-cma-Add-vc_cma-driver-to-enable-use-of-CMA.patch +++ /dev/null @@ -1,1319 +0,0 @@ -From 4d96064d4c95d73d22563cea403eccd72e7b0da0 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Wed, 3 Jul 2013 00:31:47 +0100 -Subject: [PATCH] cma: Add vc_cma driver to enable use of CMA -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: popcornmix - -vc_cma: Make the vc_cma area the default contiguous DMA area - -vc_cma: Provide empty functions when module is not built - -Providing empty functions saves the users from guarding the -function call with an #if clause. -Move __init markings from prototypes to functions. - -Signed-off-by: Noralf Trønnes ---- - drivers/char/Kconfig | 2 + - drivers/char/Makefile | 1 + - drivers/char/broadcom/Kconfig | 15 + - drivers/char/broadcom/Makefile | 1 + - drivers/char/broadcom/vc_cma/Makefile | 7 + - drivers/char/broadcom/vc_cma/vc_cma.c | 1193 +++++++++++++++++++++++++++++++++ - include/linux/broadcom/vc_cma.h | 36 + - 7 files changed, 1255 insertions(+) - create mode 100644 drivers/char/broadcom/Kconfig - create mode 100644 drivers/char/broadcom/Makefile - create mode 100644 drivers/char/broadcom/vc_cma/Makefile - create mode 100644 drivers/char/broadcom/vc_cma/vc_cma.c - create mode 100644 include/linux/broadcom/vc_cma.h - ---- a/drivers/char/Kconfig -+++ b/drivers/char/Kconfig -@@ -4,6 +4,8 @@ - - menu "Character devices" - -+source "drivers/char/broadcom/Kconfig" -+ - source "drivers/tty/Kconfig" - - config DEVMEM ---- a/drivers/char/Makefile -+++ b/drivers/char/Makefile -@@ -60,3 +60,4 @@ js-rtc-y = rtc.o - obj-$(CONFIG_TILE_SROM) += tile-srom.o - obj-$(CONFIG_XILLYBUS) += xillybus/ - obj-$(CONFIG_POWERNV_OP_PANEL) += powernv-op-panel.o -+obj-$(CONFIG_BRCM_CHAR_DRIVERS) += broadcom/ ---- /dev/null -+++ b/drivers/char/broadcom/Kconfig -@@ -0,0 +1,15 @@ -+# -+# Broadcom char driver config -+# -+ -+menuconfig BRCM_CHAR_DRIVERS -+ bool "Broadcom Char Drivers" -+ help -+ Broadcom's char drivers -+ -+config BCM_VC_CMA -+ bool "Videocore CMA" -+ depends on CMA && BRCM_CHAR_DRIVERS && BCM2708_VCHIQ -+ default n -+ help -+ Helper for videocore CMA access. ---- /dev/null -+++ b/drivers/char/broadcom/Makefile -@@ -0,0 +1 @@ -+obj-$(CONFIG_BCM_VC_CMA) += vc_cma/ ---- /dev/null -+++ b/drivers/char/broadcom/vc_cma/Makefile -@@ -0,0 +1,7 @@ -+ccflags-$(CONFIG_BCM_VC_CMA) += -Wall -Wstrict-prototypes -Wno-trigraphs -Werror -+ccflags-$(CONFIG_BCM_VC_CMA) += -Iinclude/linux/broadcom -Idrivers/staging/vc04_services -Idrivers/staging/vc04_services/interface/vchi -Idrivers/staging/vc04_services/interface/vchiq_arm -+ccflags-$(CONFIG_BCM_VC_CMA) += -D__KERNEL__ -D__linux__ -+ -+obj-$(CONFIG_BCM_VC_CMA) += vc-cma.o -+ -+vc-cma-objs := vc_cma.o ---- /dev/null -+++ b/drivers/char/broadcom/vc_cma/vc_cma.c -@@ -0,0 +1,1193 @@ -+/** -+ * Copyright (c) 2010-2012 Broadcom. All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions, and the following disclaimer, -+ * without modification. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The names of the above-listed copyright holders may not be used -+ * to endorse or promote products derived from this software without -+ * specific prior written permission. -+ * -+ * ALTERNATIVELY, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") version 2, as published by the Free -+ * Software Foundation. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS -+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, -+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "vc_cma.h" -+ -+#include "vchiq_util.h" -+#include "vchiq_connected.h" -+//#include "debug_sym.h" -+//#include "vc_mem.h" -+ -+#define DRIVER_NAME "vc-cma" -+ -+#define LOG_DBG(fmt, ...) \ -+ if (vc_cma_debug) \ -+ printk(KERN_INFO fmt "\n", ##__VA_ARGS__) -+#define LOG_INFO(fmt, ...) \ -+ printk(KERN_INFO fmt "\n", ##__VA_ARGS__) -+#define LOG_ERR(fmt, ...) \ -+ printk(KERN_ERR fmt "\n", ##__VA_ARGS__) -+ -+#define VC_CMA_FOURCC VCHIQ_MAKE_FOURCC('C', 'M', 'A', ' ') -+#define VC_CMA_VERSION 2 -+ -+#define VC_CMA_CHUNK_ORDER 6 /* 256K */ -+#define VC_CMA_CHUNK_SIZE (4096 << VC_CMA_CHUNK_ORDER) -+#define VC_CMA_MAX_PARAMS_PER_MSG \ -+ ((VCHIQ_MAX_MSG_SIZE - sizeof(unsigned short))/sizeof(unsigned short)) -+#define VC_CMA_RESERVE_COUNT_MAX 16 -+ -+#define PAGES_PER_CHUNK (VC_CMA_CHUNK_SIZE / PAGE_SIZE) -+ -+#define VCADDR_TO_PHYSADDR(vcaddr) (mm_vc_mem_phys_addr + vcaddr) -+ -+#define loud_error(...) \ -+ LOG_ERR("===== " __VA_ARGS__) -+ -+enum { -+ VC_CMA_MSG_QUIT, -+ VC_CMA_MSG_OPEN, -+ VC_CMA_MSG_TICK, -+ VC_CMA_MSG_ALLOC, /* chunk count */ -+ VC_CMA_MSG_FREE, /* chunk, chunk, ... */ -+ VC_CMA_MSG_ALLOCATED, /* chunk, chunk, ... */ -+ VC_CMA_MSG_REQUEST_ALLOC, /* chunk count */ -+ VC_CMA_MSG_REQUEST_FREE, /* chunk count */ -+ VC_CMA_MSG_RESERVE, /* bytes lo, bytes hi */ -+ VC_CMA_MSG_UPDATE_RESERVE, -+ VC_CMA_MSG_MAX -+}; -+ -+struct cma_msg { -+ unsigned short type; -+ unsigned short params[VC_CMA_MAX_PARAMS_PER_MSG]; -+}; -+ -+struct vc_cma_reserve_user { -+ unsigned int pid; -+ unsigned int reserve; -+}; -+ -+/* Device (/dev) related variables */ -+static dev_t vc_cma_devnum; -+static struct class *vc_cma_class; -+static struct cdev vc_cma_cdev; -+static int vc_cma_inited; -+static int vc_cma_debug; -+ -+/* Proc entry */ -+static struct proc_dir_entry *vc_cma_proc_entry; -+ -+phys_addr_t vc_cma_base; -+struct page *vc_cma_base_page; -+unsigned int vc_cma_size; -+EXPORT_SYMBOL(vc_cma_size); -+unsigned int vc_cma_initial; -+unsigned int vc_cma_chunks; -+unsigned int vc_cma_chunks_used; -+unsigned int vc_cma_chunks_reserved; -+ -+ -+void *vc_cma_dma_alloc; -+unsigned int vc_cma_dma_size; -+ -+static int in_loud_error; -+ -+unsigned int vc_cma_reserve_total; -+unsigned int vc_cma_reserve_count; -+struct vc_cma_reserve_user vc_cma_reserve_users[VC_CMA_RESERVE_COUNT_MAX]; -+static DEFINE_SEMAPHORE(vc_cma_reserve_mutex); -+static DEFINE_SEMAPHORE(vc_cma_worker_queue_push_mutex); -+ -+static u64 vc_cma_dma_mask = DMA_BIT_MASK(32); -+static struct platform_device vc_cma_device = { -+ .name = "vc-cma", -+ .id = 0, -+ .dev = { -+ .dma_mask = &vc_cma_dma_mask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+}; -+ -+static VCHIQ_INSTANCE_T cma_instance; -+static VCHIQ_SERVICE_HANDLE_T cma_service; -+static VCHIU_QUEUE_T cma_msg_queue; -+static struct task_struct *cma_worker; -+ -+static int vc_cma_set_reserve(unsigned int reserve, unsigned int pid); -+static int vc_cma_alloc_chunks(int num_chunks, struct cma_msg *reply); -+static VCHIQ_STATUS_T cma_service_callback(VCHIQ_REASON_T reason, -+ VCHIQ_HEADER_T * header, -+ VCHIQ_SERVICE_HANDLE_T service, -+ void *bulk_userdata); -+static void send_vc_msg(unsigned short type, -+ unsigned short param1, unsigned short param2); -+static bool send_worker_msg(VCHIQ_HEADER_T * msg); -+ -+static int early_vc_cma_mem(char *p) -+{ -+ unsigned int new_size; -+ printk(KERN_NOTICE "early_vc_cma_mem(%s)", p); -+ vc_cma_size = memparse(p, &p); -+ vc_cma_initial = vc_cma_size; -+ if (*p == '/') -+ vc_cma_size = memparse(p + 1, &p); -+ if (*p == '@') -+ vc_cma_base = memparse(p + 1, &p); -+ -+ new_size = (vc_cma_size - ((-vc_cma_base) & (VC_CMA_CHUNK_SIZE - 1))) -+ & ~(VC_CMA_CHUNK_SIZE - 1); -+ if (new_size > vc_cma_size) -+ vc_cma_size = 0; -+ vc_cma_initial = (vc_cma_initial + VC_CMA_CHUNK_SIZE - 1) -+ & ~(VC_CMA_CHUNK_SIZE - 1); -+ if (vc_cma_initial > vc_cma_size) -+ vc_cma_initial = vc_cma_size; -+ vc_cma_base = (vc_cma_base + VC_CMA_CHUNK_SIZE - 1) -+ & ~(VC_CMA_CHUNK_SIZE - 1); -+ -+ printk(KERN_NOTICE " -> initial %x, size %x, base %x", vc_cma_initial, -+ vc_cma_size, (unsigned int)vc_cma_base); -+ -+ return 0; -+} -+ -+early_param("vc-cma-mem", early_vc_cma_mem); -+ -+void __init vc_cma_early_init(void) -+{ -+ LOG_DBG("vc_cma_early_init - vc_cma_chunks = %d", vc_cma_chunks); -+ if (vc_cma_size) { -+ int rc = platform_device_register(&vc_cma_device); -+ LOG_DBG("platform_device_register -> %d", rc); -+ } -+} -+ -+void __init vc_cma_reserve(void) -+{ -+ /* if vc_cma_size is set, then declare vc CMA area of the same -+ * size from the end of memory -+ */ -+ if (vc_cma_size) { -+ if (dma_declare_contiguous(&vc_cma_device.dev, vc_cma_size, -+ vc_cma_base, 0) == 0) { -+ if (!dev_get_cma_area(NULL)) { -+ /* There is no default CMA area - make this -+ the default */ -+ struct cma *vc_cma_area = dev_get_cma_area( -+ &vc_cma_device.dev); -+ dma_contiguous_set_default(vc_cma_area); -+ LOG_INFO("vc_cma_reserve - using vc_cma as " -+ "the default contiguous DMA area"); -+ } -+ } else { -+ LOG_ERR("vc_cma: dma_declare_contiguous(%x,%x) failed", -+ vc_cma_size, (unsigned int)vc_cma_base); -+ vc_cma_size = 0; -+ } -+ } -+ vc_cma_chunks = vc_cma_size / VC_CMA_CHUNK_SIZE; -+} -+ -+/**************************************************************************** -+* -+* vc_cma_open -+* -+***************************************************************************/ -+ -+static int vc_cma_open(struct inode *inode, struct file *file) -+{ -+ (void)inode; -+ (void)file; -+ -+ return 0; -+} -+ -+/**************************************************************************** -+* -+* vc_cma_release -+* -+***************************************************************************/ -+ -+static int vc_cma_release(struct inode *inode, struct file *file) -+{ -+ (void)inode; -+ (void)file; -+ -+ vc_cma_set_reserve(0, current->tgid); -+ -+ return 0; -+} -+ -+/**************************************************************************** -+* -+* vc_cma_ioctl -+* -+***************************************************************************/ -+ -+static long vc_cma_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ int rc = 0; -+ -+ (void)cmd; -+ (void)arg; -+ -+ switch (cmd) { -+ case VC_CMA_IOC_RESERVE: -+ rc = vc_cma_set_reserve((unsigned int)arg, current->tgid); -+ if (rc >= 0) -+ rc = 0; -+ break; -+ default: -+ LOG_ERR("vc-cma: Unknown ioctl %x", cmd); -+ return -ENOTTY; -+ } -+ -+ return rc; -+} -+ -+/**************************************************************************** -+* -+* File Operations for the driver. -+* -+***************************************************************************/ -+ -+static const struct file_operations vc_cma_fops = { -+ .owner = THIS_MODULE, -+ .open = vc_cma_open, -+ .release = vc_cma_release, -+ .unlocked_ioctl = vc_cma_ioctl, -+}; -+ -+/**************************************************************************** -+* -+* vc_cma_proc_open -+* -+***************************************************************************/ -+ -+static int vc_cma_show_info(struct seq_file *m, void *v) -+{ -+ int i; -+ -+ seq_printf(m, "Videocore CMA:\n"); -+ seq_printf(m, " Base : %08x\n", (unsigned int)vc_cma_base); -+ seq_printf(m, " Length : %08x\n", vc_cma_size); -+ seq_printf(m, " Initial : %08x\n", vc_cma_initial); -+ seq_printf(m, " Chunk size : %08x\n", VC_CMA_CHUNK_SIZE); -+ seq_printf(m, " Chunks : %4d (%d bytes)\n", -+ (int)vc_cma_chunks, -+ (int)(vc_cma_chunks * VC_CMA_CHUNK_SIZE)); -+ seq_printf(m, " Used : %4d (%d bytes)\n", -+ (int)vc_cma_chunks_used, -+ (int)(vc_cma_chunks_used * VC_CMA_CHUNK_SIZE)); -+ seq_printf(m, " Reserved : %4d (%d bytes)\n", -+ (unsigned int)vc_cma_chunks_reserved, -+ (int)(vc_cma_chunks_reserved * VC_CMA_CHUNK_SIZE)); -+ -+ for (i = 0; i < vc_cma_reserve_count; i++) { -+ struct vc_cma_reserve_user *user = &vc_cma_reserve_users[i]; -+ seq_printf(m, " PID %5d: %d bytes\n", user->pid, -+ user->reserve); -+ } -+ seq_printf(m, " dma_alloc : %p (%d pages)\n", -+ vc_cma_dma_alloc ? page_address(vc_cma_dma_alloc) : 0, -+ vc_cma_dma_size); -+ -+ seq_printf(m, "\n"); -+ -+ return 0; -+} -+ -+static int vc_cma_proc_open(struct inode *inode, struct file *file) -+{ -+ return single_open(file, vc_cma_show_info, NULL); -+} -+ -+/**************************************************************************** -+* -+* vc_cma_proc_write -+* -+***************************************************************************/ -+ -+static int vc_cma_proc_write(struct file *file, -+ const char __user *buffer, -+ size_t size, loff_t *ppos) -+{ -+ int rc = -EFAULT; -+ char input_str[20]; -+ -+ memset(input_str, 0, sizeof(input_str)); -+ -+ if (size > sizeof(input_str)) { -+ LOG_ERR("%s: input string length too long", __func__); -+ goto out; -+ } -+ -+ if (copy_from_user(input_str, buffer, size - 1)) { -+ LOG_ERR("%s: failed to get input string", __func__); -+ goto out; -+ } -+#define ALLOC_STR "alloc" -+#define FREE_STR "free" -+#define DEBUG_STR "debug" -+#define RESERVE_STR "reserve" -+#define DMA_ALLOC_STR "dma_alloc" -+#define DMA_FREE_STR "dma_free" -+ if (strncmp(input_str, ALLOC_STR, strlen(ALLOC_STR)) == 0) { -+ int alloc_size; -+ char *p = input_str + strlen(ALLOC_STR); -+ -+ while (*p == ' ') -+ p++; -+ alloc_size = memparse(p, NULL); -+ LOG_INFO("/proc/vc-cma: alloc %d", alloc_size); -+ if (alloc_size) -+ send_vc_msg(VC_CMA_MSG_REQUEST_FREE, -+ alloc_size / VC_CMA_CHUNK_SIZE, 0); -+ else -+ LOG_ERR("invalid size '%s'", p); -+ rc = size; -+ } else if (strncmp(input_str, FREE_STR, strlen(FREE_STR)) == 0) { -+ int alloc_size; -+ char *p = input_str + strlen(FREE_STR); -+ -+ while (*p == ' ') -+ p++; -+ alloc_size = memparse(p, NULL); -+ LOG_INFO("/proc/vc-cma: free %d", alloc_size); -+ if (alloc_size) -+ send_vc_msg(VC_CMA_MSG_REQUEST_ALLOC, -+ alloc_size / VC_CMA_CHUNK_SIZE, 0); -+ else -+ LOG_ERR("invalid size '%s'", p); -+ rc = size; -+ } else if (strncmp(input_str, DEBUG_STR, strlen(DEBUG_STR)) == 0) { -+ char *p = input_str + strlen(DEBUG_STR); -+ while (*p == ' ') -+ p++; -+ if ((strcmp(p, "on") == 0) || (strcmp(p, "1") == 0)) -+ vc_cma_debug = 1; -+ else if ((strcmp(p, "off") == 0) || (strcmp(p, "0") == 0)) -+ vc_cma_debug = 0; -+ LOG_INFO("/proc/vc-cma: debug %s", vc_cma_debug ? "on" : "off"); -+ rc = size; -+ } else if (strncmp(input_str, RESERVE_STR, strlen(RESERVE_STR)) == 0) { -+ int alloc_size; -+ int reserved; -+ char *p = input_str + strlen(RESERVE_STR); -+ while (*p == ' ') -+ p++; -+ alloc_size = memparse(p, NULL); -+ -+ reserved = vc_cma_set_reserve(alloc_size, current->tgid); -+ rc = (reserved >= 0) ? size : reserved; -+ } else if (strncmp(input_str, DMA_ALLOC_STR, strlen(DMA_ALLOC_STR)) == 0) { -+ int alloc_size; -+ char *p = input_str + strlen(DMA_ALLOC_STR); -+ while (*p == ' ') -+ p++; -+ alloc_size = memparse(p, NULL); -+ -+ if (vc_cma_dma_alloc) { -+ dma_release_from_contiguous(NULL, vc_cma_dma_alloc, -+ vc_cma_dma_size); -+ vc_cma_dma_alloc = NULL; -+ vc_cma_dma_size = 0; -+ } -+ vc_cma_dma_alloc = dma_alloc_from_contiguous(NULL, alloc_size, 0); -+ vc_cma_dma_size = (vc_cma_dma_alloc ? alloc_size : 0); -+ if (vc_cma_dma_alloc) -+ LOG_INFO("dma_alloc(%d pages) -> %p", alloc_size, page_address(vc_cma_dma_alloc)); -+ else -+ LOG_ERR("dma_alloc(%d pages) failed", alloc_size); -+ rc = size; -+ } else if (strncmp(input_str, DMA_FREE_STR, strlen(DMA_FREE_STR)) == 0) { -+ if (vc_cma_dma_alloc) { -+ dma_release_from_contiguous(NULL, vc_cma_dma_alloc, -+ vc_cma_dma_size); -+ vc_cma_dma_alloc = NULL; -+ vc_cma_dma_size = 0; -+ } -+ rc = size; -+ } -+ -+out: -+ return rc; -+} -+ -+/**************************************************************************** -+* -+* File Operations for /proc interface. -+* -+***************************************************************************/ -+ -+static const struct file_operations vc_cma_proc_fops = { -+ .open = vc_cma_proc_open, -+ .read = seq_read, -+ .write = vc_cma_proc_write, -+ .llseek = seq_lseek, -+ .release = single_release -+}; -+ -+static int vc_cma_set_reserve(unsigned int reserve, unsigned int pid) -+{ -+ struct vc_cma_reserve_user *user = NULL; -+ int delta = 0; -+ int i; -+ -+ if (down_interruptible(&vc_cma_reserve_mutex)) -+ return -ERESTARTSYS; -+ -+ for (i = 0; i < vc_cma_reserve_count; i++) { -+ if (pid == vc_cma_reserve_users[i].pid) { -+ user = &vc_cma_reserve_users[i]; -+ delta = reserve - user->reserve; -+ if (reserve) -+ user->reserve = reserve; -+ else { -+ /* Remove this entry by copying downwards */ -+ while ((i + 1) < vc_cma_reserve_count) { -+ user[0].pid = user[1].pid; -+ user[0].reserve = user[1].reserve; -+ user++; -+ i++; -+ } -+ vc_cma_reserve_count--; -+ user = NULL; -+ } -+ break; -+ } -+ } -+ -+ if (reserve && !user) { -+ if (vc_cma_reserve_count == VC_CMA_RESERVE_COUNT_MAX) { -+ LOG_ERR("vc-cma: Too many reservations - " -+ "increase CMA_RESERVE_COUNT_MAX"); -+ up(&vc_cma_reserve_mutex); -+ return -EBUSY; -+ } -+ user = &vc_cma_reserve_users[vc_cma_reserve_count]; -+ user->pid = pid; -+ user->reserve = reserve; -+ delta = reserve; -+ vc_cma_reserve_count++; -+ } -+ -+ vc_cma_reserve_total += delta; -+ -+ send_vc_msg(VC_CMA_MSG_RESERVE, -+ vc_cma_reserve_total & 0xffff, vc_cma_reserve_total >> 16); -+ -+ send_worker_msg((VCHIQ_HEADER_T *) VC_CMA_MSG_UPDATE_RESERVE); -+ -+ LOG_DBG("/proc/vc-cma: reserve %d (PID %d) - total %u", -+ reserve, pid, vc_cma_reserve_total); -+ -+ up(&vc_cma_reserve_mutex); -+ -+ return vc_cma_reserve_total; -+} -+ -+static VCHIQ_STATUS_T cma_service_callback(VCHIQ_REASON_T reason, -+ VCHIQ_HEADER_T * header, -+ VCHIQ_SERVICE_HANDLE_T service, -+ void *bulk_userdata) -+{ -+ switch (reason) { -+ case VCHIQ_MESSAGE_AVAILABLE: -+ if (!send_worker_msg(header)) -+ return VCHIQ_RETRY; -+ break; -+ case VCHIQ_SERVICE_CLOSED: -+ LOG_DBG("CMA service closed"); -+ break; -+ default: -+ LOG_ERR("Unexpected CMA callback reason %d", reason); -+ break; -+ } -+ return VCHIQ_SUCCESS; -+} -+ -+static void send_vc_msg(unsigned short type, -+ unsigned short param1, unsigned short param2) -+{ -+ unsigned short msg[] = { type, param1, param2 }; -+ VCHIQ_ELEMENT_T elem = { &msg, sizeof(msg) }; -+ VCHIQ_STATUS_T ret; -+ vchiq_use_service(cma_service); -+ ret = vchiq_queue_message(cma_service, &elem, 1); -+ vchiq_release_service(cma_service); -+ if (ret != VCHIQ_SUCCESS) -+ LOG_ERR("vchiq_queue_message returned %x", ret); -+} -+ -+static bool send_worker_msg(VCHIQ_HEADER_T * msg) -+{ -+ if (down_interruptible(&vc_cma_worker_queue_push_mutex)) -+ return false; -+ vchiu_queue_push(&cma_msg_queue, msg); -+ up(&vc_cma_worker_queue_push_mutex); -+ return true; -+} -+ -+static int vc_cma_alloc_chunks(int num_chunks, struct cma_msg *reply) -+{ -+ int i; -+ for (i = 0; i < num_chunks; i++) { -+ struct page *chunk; -+ unsigned int chunk_num; -+ uint8_t *chunk_addr; -+ size_t chunk_size = PAGES_PER_CHUNK << PAGE_SHIFT; -+ -+ chunk = dma_alloc_from_contiguous(&vc_cma_device.dev, -+ PAGES_PER_CHUNK, -+ VC_CMA_CHUNK_ORDER); -+ if (!chunk) -+ break; -+ -+ chunk_addr = page_address(chunk); -+ dmac_flush_range(chunk_addr, chunk_addr + chunk_size); -+ outer_inv_range(__pa(chunk_addr), __pa(chunk_addr) + -+ chunk_size); -+ -+ chunk_num = -+ (page_to_phys(chunk) - vc_cma_base) / VC_CMA_CHUNK_SIZE; -+ BUG_ON(((page_to_phys(chunk) - vc_cma_base) % -+ VC_CMA_CHUNK_SIZE) != 0); -+ if (chunk_num >= vc_cma_chunks) { -+ phys_addr_t _pa = vc_cma_base + vc_cma_size - 1; -+ LOG_ERR("%s: ===============================", -+ __func__); -+ LOG_ERR("%s: chunk phys %x, vc_cma %pa-%pa - " -+ "bad SPARSEMEM configuration?", -+ __func__, (unsigned int)page_to_phys(chunk), -+ &vc_cma_base, &_pa); -+ LOG_ERR("%s: dev->cma_area = %p", __func__, -+ (void*)0/*vc_cma_device.dev.cma_area*/); -+ LOG_ERR("%s: ===============================", -+ __func__); -+ break; -+ } -+ reply->params[i] = chunk_num; -+ vc_cma_chunks_used++; -+ } -+ -+ if (i < num_chunks) { -+ LOG_ERR("%s: dma_alloc_from_contiguous failed " -+ "for %x bytes (alloc %d of %d, %d free)", -+ __func__, VC_CMA_CHUNK_SIZE, i, -+ num_chunks, vc_cma_chunks - vc_cma_chunks_used); -+ num_chunks = i; -+ } -+ -+ LOG_DBG("CMA allocated %d chunks -> %d used", -+ num_chunks, vc_cma_chunks_used); -+ reply->type = VC_CMA_MSG_ALLOCATED; -+ -+ { -+ VCHIQ_ELEMENT_T elem = { -+ reply, -+ offsetof(struct cma_msg, params[0]) + -+ num_chunks * sizeof(reply->params[0]) -+ }; -+ VCHIQ_STATUS_T ret; -+ vchiq_use_service(cma_service); -+ ret = vchiq_queue_message(cma_service, &elem, 1); -+ vchiq_release_service(cma_service); -+ if (ret != VCHIQ_SUCCESS) -+ LOG_ERR("vchiq_queue_message return " "%x", ret); -+ } -+ -+ return num_chunks; -+} -+ -+static int cma_worker_proc(void *param) -+{ -+ static struct cma_msg reply; -+ (void)param; -+ -+ while (1) { -+ VCHIQ_HEADER_T *msg; -+ static struct cma_msg msg_copy; -+ struct cma_msg *cma_msg = &msg_copy; -+ int type, msg_size; -+ -+ msg = vchiu_queue_pop(&cma_msg_queue); -+ if ((unsigned int)msg >= VC_CMA_MSG_MAX) { -+ msg_size = msg->size; -+ memcpy(&msg_copy, msg->data, msg_size); -+ type = cma_msg->type; -+ vchiq_release_message(cma_service, msg); -+ } else { -+ msg_size = 0; -+ type = (int)msg; -+ if (type == VC_CMA_MSG_QUIT) -+ break; -+ else if (type == VC_CMA_MSG_UPDATE_RESERVE) { -+ msg = NULL; -+ cma_msg = NULL; -+ } else { -+ BUG(); -+ continue; -+ } -+ } -+ -+ switch (type) { -+ case VC_CMA_MSG_ALLOC:{ -+ int num_chunks, free_chunks; -+ num_chunks = cma_msg->params[0]; -+ free_chunks = -+ vc_cma_chunks - vc_cma_chunks_used; -+ LOG_DBG("CMA_MSG_ALLOC(%d chunks)", num_chunks); -+ if (num_chunks > VC_CMA_MAX_PARAMS_PER_MSG) { -+ LOG_ERR -+ ("CMA_MSG_ALLOC - chunk count (%d) " -+ "exceeds VC_CMA_MAX_PARAMS_PER_MSG (%d)", -+ num_chunks, -+ VC_CMA_MAX_PARAMS_PER_MSG); -+ num_chunks = VC_CMA_MAX_PARAMS_PER_MSG; -+ } -+ -+ if (num_chunks > free_chunks) { -+ LOG_ERR -+ ("CMA_MSG_ALLOC - chunk count (%d) " -+ "exceeds free chunks (%d)", -+ num_chunks, free_chunks); -+ num_chunks = free_chunks; -+ } -+ -+ vc_cma_alloc_chunks(num_chunks, &reply); -+ } -+ break; -+ -+ case VC_CMA_MSG_FREE:{ -+ int chunk_count = -+ (msg_size - -+ offsetof(struct cma_msg, -+ params)) / -+ sizeof(cma_msg->params[0]); -+ int i; -+ BUG_ON(chunk_count <= 0); -+ -+ LOG_DBG("CMA_MSG_FREE(%d chunks - %x, ...)", -+ chunk_count, cma_msg->params[0]); -+ for (i = 0; i < chunk_count; i++) { -+ int chunk_num = cma_msg->params[i]; -+ struct page *page = vc_cma_base_page + -+ chunk_num * PAGES_PER_CHUNK; -+ if (chunk_num >= vc_cma_chunks) { -+ LOG_ERR -+ ("CMA_MSG_FREE - chunk %d of %d" -+ " (value %x) exceeds maximum " -+ "(%x)", i, chunk_count, -+ chunk_num, -+ vc_cma_chunks - 1); -+ break; -+ } -+ -+ if (!dma_release_from_contiguous -+ (&vc_cma_device.dev, page, -+ PAGES_PER_CHUNK)) { -+ phys_addr_t _pa = page_to_phys(page); -+ LOG_ERR -+ ("CMA_MSG_FREE - failed to " -+ "release chunk %d (phys %pa, " -+ "page %x)", chunk_num, -+ &_pa, -+ (unsigned int)page); -+ } -+ vc_cma_chunks_used--; -+ } -+ LOG_DBG("CMA released %d chunks -> %d used", -+ i, vc_cma_chunks_used); -+ } -+ break; -+ -+ case VC_CMA_MSG_UPDATE_RESERVE:{ -+ int chunks_needed = -+ ((vc_cma_reserve_total + VC_CMA_CHUNK_SIZE - -+ 1) -+ / VC_CMA_CHUNK_SIZE) - -+ vc_cma_chunks_reserved; -+ -+ LOG_DBG -+ ("CMA_MSG_UPDATE_RESERVE(%d chunks needed)", -+ chunks_needed); -+ -+ /* Cap the reservations to what is available */ -+ if (chunks_needed > 0) { -+ if (chunks_needed > -+ (vc_cma_chunks - -+ vc_cma_chunks_used)) -+ chunks_needed = -+ (vc_cma_chunks - -+ vc_cma_chunks_used); -+ -+ chunks_needed = -+ vc_cma_alloc_chunks(chunks_needed, -+ &reply); -+ } -+ -+ LOG_DBG -+ ("CMA_MSG_UPDATE_RESERVE(%d chunks allocated)", -+ chunks_needed); -+ vc_cma_chunks_reserved += chunks_needed; -+ } -+ break; -+ -+ default: -+ LOG_ERR("unexpected msg type %d", type); -+ break; -+ } -+ } -+ -+ LOG_DBG("quitting..."); -+ return 0; -+} -+ -+/**************************************************************************** -+* -+* vc_cma_connected_init -+* -+* This function is called once the videocore has been connected. -+* -+***************************************************************************/ -+ -+static void vc_cma_connected_init(void) -+{ -+ VCHIQ_SERVICE_PARAMS_T service_params; -+ -+ LOG_DBG("vc_cma_connected_init"); -+ -+ if (!vchiu_queue_init(&cma_msg_queue, 16)) { -+ LOG_ERR("could not create CMA msg queue"); -+ goto fail_queue; -+ } -+ -+ if (vchiq_initialise(&cma_instance) != VCHIQ_SUCCESS) -+ goto fail_vchiq_init; -+ -+ vchiq_connect(cma_instance); -+ -+ service_params.fourcc = VC_CMA_FOURCC; -+ service_params.callback = cma_service_callback; -+ service_params.userdata = NULL; -+ service_params.version = VC_CMA_VERSION; -+ service_params.version_min = VC_CMA_VERSION; -+ -+ if (vchiq_open_service(cma_instance, &service_params, -+ &cma_service) != VCHIQ_SUCCESS) { -+ LOG_ERR("failed to open service - already in use?"); -+ goto fail_vchiq_open; -+ } -+ -+ vchiq_release_service(cma_service); -+ -+ cma_worker = kthread_create(cma_worker_proc, NULL, "cma_worker"); -+ if (!cma_worker) { -+ LOG_ERR("could not create CMA worker thread"); -+ goto fail_worker; -+ } -+ set_user_nice(cma_worker, -20); -+ wake_up_process(cma_worker); -+ -+ return; -+ -+fail_worker: -+ vchiq_close_service(cma_service); -+fail_vchiq_open: -+ vchiq_shutdown(cma_instance); -+fail_vchiq_init: -+ vchiu_queue_delete(&cma_msg_queue); -+fail_queue: -+ return; -+} -+ -+void -+loud_error_header(void) -+{ -+ if (in_loud_error) -+ return; -+ -+ LOG_ERR("============================================================" -+ "================"); -+ LOG_ERR("============================================================" -+ "================"); -+ LOG_ERR("====="); -+ -+ in_loud_error = 1; -+} -+ -+void -+loud_error_footer(void) -+{ -+ if (!in_loud_error) -+ return; -+ -+ LOG_ERR("====="); -+ LOG_ERR("============================================================" -+ "================"); -+ LOG_ERR("============================================================" -+ "================"); -+ -+ in_loud_error = 0; -+} -+ -+#if 1 -+static int check_cma_config(void) { return 1; } -+#else -+static int -+read_vc_debug_var(VC_MEM_ACCESS_HANDLE_T handle, -+ const char *symbol, -+ void *buf, size_t bufsize) -+{ -+ VC_MEM_ADDR_T vcMemAddr; -+ size_t vcMemSize; -+ uint8_t *mapAddr; -+ off_t vcMapAddr; -+ -+ if (!LookupVideoCoreSymbol(handle, symbol, -+ &vcMemAddr, -+ &vcMemSize)) { -+ loud_error_header(); -+ loud_error( -+ "failed to find VC symbol \"%s\".", -+ symbol); -+ loud_error_footer(); -+ return 0; -+ } -+ -+ if (vcMemSize != bufsize) { -+ loud_error_header(); -+ loud_error( -+ "VC symbol \"%s\" is the wrong size.", -+ symbol); -+ loud_error_footer(); -+ return 0; -+ } -+ -+ vcMapAddr = (off_t)vcMemAddr & VC_MEM_TO_ARM_ADDR_MASK; -+ vcMapAddr += mm_vc_mem_phys_addr; -+ mapAddr = ioremap_nocache(vcMapAddr, vcMemSize); -+ if (mapAddr == 0) { -+ loud_error_header(); -+ loud_error( -+ "failed to ioremap \"%s\" @ 0x%x " -+ "(phys: 0x%x, size: %u).", -+ symbol, -+ (unsigned int)vcMapAddr, -+ (unsigned int)vcMemAddr, -+ (unsigned int)vcMemSize); -+ loud_error_footer(); -+ return 0; -+ } -+ -+ memcpy(buf, mapAddr, bufsize); -+ iounmap(mapAddr); -+ -+ return 1; -+} -+ -+ -+static int -+check_cma_config(void) -+{ -+ VC_MEM_ACCESS_HANDLE_T mem_hndl; -+ VC_MEM_ADDR_T mempool_start; -+ VC_MEM_ADDR_T mempool_end; -+ VC_MEM_ADDR_T mempool_offline_start; -+ VC_MEM_ADDR_T mempool_offline_end; -+ VC_MEM_ADDR_T cam_alloc_base; -+ VC_MEM_ADDR_T cam_alloc_size; -+ VC_MEM_ADDR_T cam_alloc_end; -+ int success = 0; -+ -+ if (OpenVideoCoreMemory(&mem_hndl) != 0) -+ goto out; -+ -+ /* Read the relevant VideoCore variables */ -+ if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_START", -+ &mempool_start, -+ sizeof(mempool_start))) -+ goto close; -+ -+ if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_END", -+ &mempool_end, -+ sizeof(mempool_end))) -+ goto close; -+ -+ if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_OFFLINE_START", -+ &mempool_offline_start, -+ sizeof(mempool_offline_start))) -+ goto close; -+ -+ if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_OFFLINE_END", -+ &mempool_offline_end, -+ sizeof(mempool_offline_end))) -+ goto close; -+ -+ if (!read_vc_debug_var(mem_hndl, "cam_alloc_base", -+ &cam_alloc_base, -+ sizeof(cam_alloc_base))) -+ goto close; -+ -+ if (!read_vc_debug_var(mem_hndl, "cam_alloc_size", -+ &cam_alloc_size, -+ sizeof(cam_alloc_size))) -+ goto close; -+ -+ cam_alloc_end = cam_alloc_base + cam_alloc_size; -+ -+ success = 1; -+ -+ /* Now the sanity checks */ -+ if (!mempool_offline_start) -+ mempool_offline_start = mempool_start; -+ if (!mempool_offline_end) -+ mempool_offline_end = mempool_end; -+ -+ if (VCADDR_TO_PHYSADDR(mempool_offline_start) != vc_cma_base) { -+ loud_error_header(); -+ loud_error( -+ "__MEMPOOL_OFFLINE_START(%x -> %lx) doesn't match " -+ "vc_cma_base(%x)", -+ mempool_offline_start, -+ VCADDR_TO_PHYSADDR(mempool_offline_start), -+ vc_cma_base); -+ success = 0; -+ } -+ -+ if (VCADDR_TO_PHYSADDR(mempool_offline_end) != -+ (vc_cma_base + vc_cma_size)) { -+ loud_error_header(); -+ loud_error( -+ "__MEMPOOL_OFFLINE_END(%x -> %lx) doesn't match " -+ "vc_cma_base(%x) + vc_cma_size(%x) = %x", -+ mempool_offline_start, -+ VCADDR_TO_PHYSADDR(mempool_offline_end), -+ vc_cma_base, vc_cma_size, vc_cma_base + vc_cma_size); -+ success = 0; -+ } -+ -+ if (mempool_end < mempool_start) { -+ loud_error_header(); -+ loud_error( -+ "__MEMPOOL_END(%x) must not be before " -+ "__MEMPOOL_START(%x)", -+ mempool_end, -+ mempool_start); -+ success = 0; -+ } -+ -+ if (mempool_offline_end < mempool_offline_start) { -+ loud_error_header(); -+ loud_error( -+ "__MEMPOOL_OFFLINE_END(%x) must not be before " -+ "__MEMPOOL_OFFLINE_START(%x)", -+ mempool_offline_end, -+ mempool_offline_start); -+ success = 0; -+ } -+ -+ if (mempool_offline_start < mempool_start) { -+ loud_error_header(); -+ loud_error( -+ "__MEMPOOL_OFFLINE_START(%x) must not be before " -+ "__MEMPOOL_START(%x)", -+ mempool_offline_start, -+ mempool_start); -+ success = 0; -+ } -+ -+ if (mempool_offline_end > mempool_end) { -+ loud_error_header(); -+ loud_error( -+ "__MEMPOOL_OFFLINE_END(%x) must not be after " -+ "__MEMPOOL_END(%x)", -+ mempool_offline_end, -+ mempool_end); -+ success = 0; -+ } -+ -+ if ((cam_alloc_base < mempool_end) && -+ (cam_alloc_end > mempool_start)) { -+ loud_error_header(); -+ loud_error( -+ "cam_alloc pool(%x-%x) overlaps " -+ "mempool(%x-%x)", -+ cam_alloc_base, cam_alloc_end, -+ mempool_start, mempool_end); -+ success = 0; -+ } -+ -+ loud_error_footer(); -+ -+close: -+ CloseVideoCoreMemory(mem_hndl); -+ -+out: -+ return success; -+} -+#endif -+ -+static int vc_cma_init(void) -+{ -+ int rc = -EFAULT; -+ struct device *dev; -+ -+ if (!check_cma_config()) -+ goto out_release; -+ -+ LOG_INFO("vc-cma: Videocore CMA driver"); -+ LOG_INFO("vc-cma: vc_cma_base = %pa", &vc_cma_base); -+ LOG_INFO("vc-cma: vc_cma_size = 0x%08x (%u MiB)", -+ vc_cma_size, vc_cma_size / (1024 * 1024)); -+ LOG_INFO("vc-cma: vc_cma_initial = 0x%08x (%u MiB)", -+ vc_cma_initial, vc_cma_initial / (1024 * 1024)); -+ -+ vc_cma_base_page = phys_to_page(vc_cma_base); -+ -+ if (vc_cma_chunks) { -+ int chunks_needed = vc_cma_initial / VC_CMA_CHUNK_SIZE; -+ -+ for (vc_cma_chunks_used = 0; -+ vc_cma_chunks_used < chunks_needed; vc_cma_chunks_used++) { -+ struct page *chunk; -+ chunk = dma_alloc_from_contiguous(&vc_cma_device.dev, -+ PAGES_PER_CHUNK, -+ VC_CMA_CHUNK_ORDER); -+ if (!chunk) -+ break; -+ BUG_ON(((page_to_phys(chunk) - vc_cma_base) % -+ VC_CMA_CHUNK_SIZE) != 0); -+ } -+ if (vc_cma_chunks_used != chunks_needed) { -+ LOG_ERR("%s: dma_alloc_from_contiguous failed (%d " -+ "bytes, allocation %d of %d)", -+ __func__, VC_CMA_CHUNK_SIZE, -+ vc_cma_chunks_used, chunks_needed); -+ goto out_release; -+ } -+ -+ vchiq_add_connected_callback(vc_cma_connected_init); -+ } -+ -+ rc = alloc_chrdev_region(&vc_cma_devnum, 0, 1, DRIVER_NAME); -+ if (rc < 0) { -+ LOG_ERR("%s: alloc_chrdev_region failed (rc=%d)", __func__, rc); -+ goto out_release; -+ } -+ -+ cdev_init(&vc_cma_cdev, &vc_cma_fops); -+ rc = cdev_add(&vc_cma_cdev, vc_cma_devnum, 1); -+ if (rc != 0) { -+ LOG_ERR("%s: cdev_add failed (rc=%d)", __func__, rc); -+ goto out_unregister; -+ } -+ -+ vc_cma_class = class_create(THIS_MODULE, DRIVER_NAME); -+ if (IS_ERR(vc_cma_class)) { -+ rc = PTR_ERR(vc_cma_class); -+ LOG_ERR("%s: class_create failed (rc=%d)", __func__, rc); -+ goto out_cdev_del; -+ } -+ -+ dev = device_create(vc_cma_class, NULL, vc_cma_devnum, NULL, -+ DRIVER_NAME); -+ if (IS_ERR(dev)) { -+ rc = PTR_ERR(dev); -+ LOG_ERR("%s: device_create failed (rc=%d)", __func__, rc); -+ goto out_class_destroy; -+ } -+ -+ vc_cma_proc_entry = proc_create(DRIVER_NAME, 0444, NULL, &vc_cma_proc_fops); -+ if (vc_cma_proc_entry == NULL) { -+ rc = -EFAULT; -+ LOG_ERR("%s: proc_create failed", __func__); -+ goto out_device_destroy; -+ } -+ -+ vc_cma_inited = 1; -+ return 0; -+ -+out_device_destroy: -+ device_destroy(vc_cma_class, vc_cma_devnum); -+ -+out_class_destroy: -+ class_destroy(vc_cma_class); -+ vc_cma_class = NULL; -+ -+out_cdev_del: -+ cdev_del(&vc_cma_cdev); -+ -+out_unregister: -+ unregister_chrdev_region(vc_cma_devnum, 1); -+ -+out_release: -+ /* It is tempting to try to clean up by calling -+ dma_release_from_contiguous for all allocated chunks, but it isn't -+ a very safe thing to do. If vc_cma_initial is non-zero it is because -+ VideoCore is already using that memory, so giving it back to Linux -+ is likely to be fatal. -+ */ -+ return -1; -+} -+ -+/**************************************************************************** -+* -+* vc_cma_exit -+* -+***************************************************************************/ -+ -+static void __exit vc_cma_exit(void) -+{ -+ LOG_DBG("%s: called", __func__); -+ -+ if (vc_cma_inited) { -+ remove_proc_entry(DRIVER_NAME, NULL); -+ device_destroy(vc_cma_class, vc_cma_devnum); -+ class_destroy(vc_cma_class); -+ cdev_del(&vc_cma_cdev); -+ unregister_chrdev_region(vc_cma_devnum, 1); -+ } -+} -+ -+module_init(vc_cma_init); -+module_exit(vc_cma_exit); -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Broadcom Corporation"); ---- /dev/null -+++ b/include/linux/broadcom/vc_cma.h -@@ -0,0 +1,36 @@ -+/***************************************************************************** -+* Copyright 2012 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#if !defined( VC_CMA_H ) -+#define VC_CMA_H -+ -+#include -+ -+#define VC_CMA_IOC_MAGIC 0xc5 -+ -+#define VC_CMA_IOC_RESERVE _IO(VC_CMA_IOC_MAGIC, 0) -+ -+#ifdef __KERNEL__ -+ -+#ifdef CONFIG_BCM_VC_CMA -+void vc_cma_early_init(void); -+void vc_cma_reserve(void); -+#else -+static inline void vc_cma_early_init(void) { } -+static inline void vc_cma_reserve(void) { } -+#endif -+ -+#endif -+ -+#endif /* VC_CMA_H */ diff --git a/target/linux/brcm2708/patches-4.9/0038-bcm2708-alsa-sound-driver.patch b/target/linux/brcm2708/patches-4.9/0038-bcm2708-alsa-sound-driver.patch deleted file mode 100644 index 58b45dec6e2f..000000000000 --- a/target/linux/brcm2708/patches-4.9/0038-bcm2708-alsa-sound-driver.patch +++ /dev/null @@ -1,2715 +0,0 @@ -From 41a90e24c272c84fb8c6d23ac451f0c725dcded6 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Mon, 26 Mar 2012 22:15:50 +0100 -Subject: [PATCH] bcm2708: alsa sound driver -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: popcornmix - -alsa: add mmap support and some cleanups to bcm2835 ALSA driver - -snd-bcm2835: Add support for spdif/hdmi passthrough - -This adds a dedicated subdevice which can be used for passthrough of non-audio -formats (ie encoded a52) through the hdmi audio link. In addition to this -driver extension an appropriate card config is required to make alsa-lib -support the AES parameters for this device. - -snd-bcm2708: Add mutex, improve logging - -Fix for ALSA driver crash - -Avoids an issue when closing and opening vchiq where a message can arrive before service handle has been written - -alsa: reduce severity of expected warning message - -snd-bcm2708: Fix dmesg spam for non-error case - -alsa: Ensure mutexes are released through error paths - -alsa: Make interrupted close paths quieter - -BCM270x: Add onboard sound device to Device Tree - -Add Device Tree support to alsa driver. -Add device to Device Tree. -Don't add platform devices when booting in DT mode. - -Signed-off-by: Noralf Trønnes - -bcm2835: access controls under the audio mutex - -I don't think the ALSA framework provides any kind of automatic -synchronization within the control callbacks. We most likely need -to ensure this manually, so add locking around all access to shared -mutable data. In particular, bcm2835_audio_set_ctls() should -probably always be called under our own audio lock. - -snd-bcm2835: Don't allow responses from VC to be interrupted by user signals - -There should always be a response, and retry after a signal interruption is not handled, so don't report -we are interruptible. - -See: https://github.com/raspberrypi/linux/issues/1560 - -snd-bcm2835: Use bcm2835_hw params in preallocate ---- - sound/arm/Kconfig | 7 + - sound/arm/Makefile | 5 + - sound/arm/bcm2835-ctl.c | 350 +++++++++++++++ - sound/arm/bcm2835-pcm.c | 563 +++++++++++++++++++++++ - sound/arm/bcm2835-vchiq.c | 889 +++++++++++++++++++++++++++++++++++++ - sound/arm/bcm2835.c | 511 +++++++++++++++++++++ - sound/arm/bcm2835.h | 167 +++++++ - sound/arm/vc_vchi_audioserv_defs.h | 116 +++++ - 8 files changed, 2608 insertions(+) - create mode 100755 sound/arm/bcm2835-ctl.c - create mode 100755 sound/arm/bcm2835-pcm.c - create mode 100755 sound/arm/bcm2835-vchiq.c - create mode 100644 sound/arm/bcm2835.c - create mode 100755 sound/arm/bcm2835.h - create mode 100644 sound/arm/vc_vchi_audioserv_defs.h - ---- a/sound/arm/Kconfig -+++ b/sound/arm/Kconfig -@@ -32,6 +32,13 @@ config SND_PXA2XX_AC97 - Say Y or M if you want to support any AC97 codec attached to - the PXA2xx AC97 interface. - -+config SND_BCM2835 -+ tristate "BCM2835 ALSA driver" -+ depends on ARCH_BCM2835 && BCM2708_VCHIQ && SND -+ select SND_PCM -+ help -+ Say Y or M if you want to support BCM2835 Alsa pcm card driver -+ - endif # SND_ARM - - config SND_PXA2XX_LIB ---- a/sound/arm/Makefile -+++ b/sound/arm/Makefile -@@ -14,3 +14,8 @@ snd-pxa2xx-lib-$(CONFIG_SND_PXA2XX_LIB_A - - obj-$(CONFIG_SND_PXA2XX_AC97) += snd-pxa2xx-ac97.o - snd-pxa2xx-ac97-objs := pxa2xx-ac97.o -+ -+obj-$(CONFIG_SND_BCM2835) += snd-bcm2835.o -+snd-bcm2835-objs := bcm2835.o bcm2835-ctl.o bcm2835-pcm.o bcm2835-vchiq.o -+ -+ccflags-y += -Idrivers/staging/vc04_services -Idrivers/staging/vc04_services/interface/vcos/linuxkernel -D__VCCOREVER__=0x04000000 ---- /dev/null -+++ b/sound/arm/bcm2835-ctl.c -@@ -0,0 +1,350 @@ -+/***************************************************************************** -+* Copyright 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "bcm2835.h" -+ -+/* volume maximum and minimum in terms of 0.01dB */ -+#define CTRL_VOL_MAX 400 -+#define CTRL_VOL_MIN -10239 /* originally -10240 */ -+ -+ -+static int snd_bcm2835_ctl_info(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_info *uinfo) -+{ -+ audio_info(" ... IN\n"); -+ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) { -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; -+ uinfo->count = 1; -+ uinfo->value.integer.min = CTRL_VOL_MIN; -+ uinfo->value.integer.max = CTRL_VOL_MAX; /* 2303 */ -+ } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) { -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; -+ uinfo->count = 1; -+ uinfo->value.integer.min = 0; -+ uinfo->value.integer.max = 1; -+ } else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) { -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; -+ uinfo->count = 1; -+ uinfo->value.integer.min = 0; -+ uinfo->value.integer.max = AUDIO_DEST_MAX-1; -+ } -+ audio_info(" ... OUT\n"); -+ return 0; -+} -+ -+/* toggles mute on or off depending on the value of nmute, and returns -+ * 1 if the mute value was changed, otherwise 0 -+ */ -+static int toggle_mute(struct bcm2835_chip *chip, int nmute) -+{ -+ /* if settings are ok, just return 0 */ -+ if(chip->mute == nmute) -+ return 0; -+ -+ /* if the sound is muted then we need to unmute */ -+ if(chip->mute == CTRL_VOL_MUTE) -+ { -+ chip->volume = chip->old_volume; /* copy the old volume back */ -+ audio_info("Unmuting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume); -+ } -+ else /* otherwise we mute */ -+ { -+ chip->old_volume = chip->volume; -+ chip->volume = 26214; /* set volume to minimum level AKA mute */ -+ audio_info("Muting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume); -+ } -+ -+ chip->mute = nmute; -+ return 1; -+} -+ -+static int snd_bcm2835_ctl_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); -+ -+ if (mutex_lock_interruptible(&chip->audio_mutex)) -+ return -EINTR; -+ -+ BUG_ON(!chip && !(chip->avail_substreams & AVAIL_SUBSTREAMS_MASK)); -+ -+ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) -+ ucontrol->value.integer.value[0] = chip2alsa(chip->volume); -+ else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) -+ ucontrol->value.integer.value[0] = chip->mute; -+ else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) -+ ucontrol->value.integer.value[0] = chip->dest; -+ -+ mutex_unlock(&chip->audio_mutex); -+ return 0; -+} -+ -+static int snd_bcm2835_ctl_put(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); -+ int changed = 0; -+ -+ if (mutex_lock_interruptible(&chip->audio_mutex)) -+ return -EINTR; -+ -+ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) { -+ audio_info("Volume change attempted.. volume = %d new_volume = %d\n", chip->volume, (int)ucontrol->value.integer.value[0]); -+ if (chip->mute == CTRL_VOL_MUTE) { -+ /* changed = toggle_mute(chip, CTRL_VOL_UNMUTE); */ -+ changed = 1; /* should return 0 to signify no change but the mixer takes this as the opposite sign (no idea why) */ -+ goto unlock; -+ } -+ if (changed -+ || (ucontrol->value.integer.value[0] != chip2alsa(chip->volume))) { -+ -+ chip->volume = alsa2chip(ucontrol->value.integer.value[0]); -+ changed = 1; -+ } -+ -+ } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) { -+ /* Now implemented */ -+ audio_info(" Mute attempted\n"); -+ changed = toggle_mute(chip, ucontrol->value.integer.value[0]); -+ -+ } else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) { -+ if (ucontrol->value.integer.value[0] != chip->dest) { -+ chip->dest = ucontrol->value.integer.value[0]; -+ changed = 1; -+ } -+ } -+ -+ if (changed) { -+ if (bcm2835_audio_set_ctls(chip)) -+ printk(KERN_ERR "Failed to set ALSA controls..\n"); -+ } -+ -+unlock: -+ mutex_unlock(&chip->audio_mutex); -+ return changed; -+} -+ -+static DECLARE_TLV_DB_SCALE(snd_bcm2835_db_scale, CTRL_VOL_MIN, 1, 1); -+ -+static struct snd_kcontrol_new snd_bcm2835_ctl[] = { -+ { -+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, -+ .name = "PCM Playback Volume", -+ .index = 0, -+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, -+ .private_value = PCM_PLAYBACK_VOLUME, -+ .info = snd_bcm2835_ctl_info, -+ .get = snd_bcm2835_ctl_get, -+ .put = snd_bcm2835_ctl_put, -+ .count = 1, -+ .tlv = {.p = snd_bcm2835_db_scale} -+ }, -+ { -+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, -+ .name = "PCM Playback Switch", -+ .index = 0, -+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, -+ .private_value = PCM_PLAYBACK_MUTE, -+ .info = snd_bcm2835_ctl_info, -+ .get = snd_bcm2835_ctl_get, -+ .put = snd_bcm2835_ctl_put, -+ .count = 1, -+ }, -+ { -+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, -+ .name = "PCM Playback Route", -+ .index = 0, -+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, -+ .private_value = PCM_PLAYBACK_DEVICE, -+ .info = snd_bcm2835_ctl_info, -+ .get = snd_bcm2835_ctl_get, -+ .put = snd_bcm2835_ctl_put, -+ .count = 1, -+ }, -+}; -+ -+static int snd_bcm2835_spdif_default_info(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_info *uinfo) -+{ -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; -+ uinfo->count = 1; -+ return 0; -+} -+ -+static int snd_bcm2835_spdif_default_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); -+ int i; -+ -+ if (mutex_lock_interruptible(&chip->audio_mutex)) -+ return -EINTR; -+ -+ for (i = 0; i < 4; i++) -+ ucontrol->value.iec958.status[i] = -+ (chip->spdif_status >> (i * 8)) && 0xff; -+ -+ mutex_unlock(&chip->audio_mutex); -+ return 0; -+} -+ -+static int snd_bcm2835_spdif_default_put(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); -+ unsigned int val = 0; -+ int i, change; -+ -+ if (mutex_lock_interruptible(&chip->audio_mutex)) -+ return -EINTR; -+ -+ for (i = 0; i < 4; i++) -+ val |= (unsigned int)ucontrol->value.iec958.status[i] << (i * 8); -+ -+ change = val != chip->spdif_status; -+ chip->spdif_status = val; -+ -+ mutex_unlock(&chip->audio_mutex); -+ return change; -+} -+ -+static int snd_bcm2835_spdif_mask_info(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_info *uinfo) -+{ -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; -+ uinfo->count = 1; -+ return 0; -+} -+ -+static int snd_bcm2835_spdif_mask_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ /* bcm2835 supports only consumer mode and sets all other format flags -+ * automatically. So the only thing left is signalling non-audio -+ * content */ -+ ucontrol->value.iec958.status[0] = IEC958_AES0_NONAUDIO; -+ return 0; -+} -+ -+static int snd_bcm2835_spdif_stream_info(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_info *uinfo) -+{ -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; -+ uinfo->count = 1; -+ return 0; -+} -+ -+static int snd_bcm2835_spdif_stream_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); -+ int i; -+ -+ if (mutex_lock_interruptible(&chip->audio_mutex)) -+ return -EINTR; -+ -+ for (i = 0; i < 4; i++) -+ ucontrol->value.iec958.status[i] = -+ (chip->spdif_status >> (i * 8)) & 0xff; -+ -+ mutex_unlock(&chip->audio_mutex); -+ return 0; -+} -+ -+static int snd_bcm2835_spdif_stream_put(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); -+ unsigned int val = 0; -+ int i, change; -+ -+ if (mutex_lock_interruptible(&chip->audio_mutex)) -+ return -EINTR; -+ -+ for (i = 0; i < 4; i++) -+ val |= (unsigned int)ucontrol->value.iec958.status[i] << (i * 8); -+ change = val != chip->spdif_status; -+ chip->spdif_status = val; -+ -+ mutex_unlock(&chip->audio_mutex); -+ return change; -+} -+ -+static struct snd_kcontrol_new snd_bcm2835_spdif[] = { -+ { -+ .iface = SNDRV_CTL_ELEM_IFACE_PCM, -+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), -+ .info = snd_bcm2835_spdif_default_info, -+ .get = snd_bcm2835_spdif_default_get, -+ .put = snd_bcm2835_spdif_default_put -+ }, -+ { -+ .access = SNDRV_CTL_ELEM_ACCESS_READ, -+ .iface = SNDRV_CTL_ELEM_IFACE_PCM, -+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, CON_MASK), -+ .info = snd_bcm2835_spdif_mask_info, -+ .get = snd_bcm2835_spdif_mask_get, -+ }, -+ { -+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | -+ SNDRV_CTL_ELEM_ACCESS_INACTIVE, -+ .iface = SNDRV_CTL_ELEM_IFACE_PCM, -+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PCM_STREAM), -+ .info = snd_bcm2835_spdif_stream_info, -+ .get = snd_bcm2835_spdif_stream_get, -+ .put = snd_bcm2835_spdif_stream_put, -+ }, -+}; -+ -+int snd_bcm2835_new_ctl(bcm2835_chip_t * chip) -+{ -+ int err; -+ unsigned int idx; -+ -+ strcpy(chip->card->mixername, "Broadcom Mixer"); -+ for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_ctl); idx++) { -+ err = -+ snd_ctl_add(chip->card, -+ snd_ctl_new1(&snd_bcm2835_ctl[idx], chip)); -+ if (err < 0) -+ return err; -+ } -+ for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_spdif); idx++) { -+ err = snd_ctl_add(chip->card, -+ snd_ctl_new1(&snd_bcm2835_spdif[idx], chip)); -+ if (err < 0) -+ return err; -+ } -+ return 0; -+} ---- /dev/null -+++ b/sound/arm/bcm2835-pcm.c -@@ -0,0 +1,563 @@ -+/***************************************************************************** -+* Copyright 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#include -+#include -+ -+#include -+ -+#include "bcm2835.h" -+ -+/* hardware definition */ -+static struct snd_pcm_hardware snd_bcm2835_playback_hw = { -+ .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | -+ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID), -+ .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, -+ .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, -+ .rate_min = 8000, -+ .rate_max = 48000, -+ .channels_min = 1, -+ .channels_max = 2, -+ .buffer_bytes_max = 128 * 1024, -+ .period_bytes_min = 1 * 1024, -+ .period_bytes_max = 128 * 1024, -+ .periods_min = 1, -+ .periods_max = 128, -+}; -+ -+static struct snd_pcm_hardware snd_bcm2835_playback_spdif_hw = { -+ .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | -+ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID), -+ .formats = SNDRV_PCM_FMTBIT_S16_LE, -+ .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_44100 | -+ SNDRV_PCM_RATE_48000, -+ .rate_min = 44100, -+ .rate_max = 48000, -+ .channels_min = 2, -+ .channels_max = 2, -+ .buffer_bytes_max = 128 * 1024, -+ .period_bytes_min = 1 * 1024, -+ .period_bytes_max = 128 * 1024, -+ .periods_min = 1, -+ .periods_max = 128, -+}; -+ -+static void snd_bcm2835_playback_free(struct snd_pcm_runtime *runtime) -+{ -+ audio_info("Freeing up alsa stream here ..\n"); -+ if (runtime->private_data) -+ kfree(runtime->private_data); -+ runtime->private_data = NULL; -+} -+ -+static irqreturn_t bcm2835_playback_fifo_irq(int irq, void *dev_id) -+{ -+ bcm2835_alsa_stream_t *alsa_stream = (bcm2835_alsa_stream_t *) dev_id; -+ uint32_t consumed = 0; -+ int new_period = 0; -+ -+ audio_info(" .. IN\n"); -+ -+ audio_info("alsa_stream=%p substream=%p\n", alsa_stream, -+ alsa_stream ? alsa_stream->substream : 0); -+ -+ if (alsa_stream->open) -+ consumed = bcm2835_audio_retrieve_buffers(alsa_stream); -+ -+ /* We get called only if playback was triggered, So, the number of buffers we retrieve in -+ * each iteration are the buffers that have been played out already -+ */ -+ -+ if (alsa_stream->period_size) { -+ if ((alsa_stream->pos / alsa_stream->period_size) != -+ ((alsa_stream->pos + consumed) / alsa_stream->period_size)) -+ new_period = 1; -+ } -+ audio_debug("updating pos cur: %d + %d max:%d period_bytes:%d, hw_ptr: %d new_period:%d\n", -+ alsa_stream->pos, -+ consumed, -+ alsa_stream->buffer_size, -+ (int)(alsa_stream->period_size*alsa_stream->substream->runtime->periods), -+ frames_to_bytes(alsa_stream->substream->runtime, alsa_stream->substream->runtime->status->hw_ptr), -+ new_period); -+ if (alsa_stream->buffer_size) { -+ alsa_stream->pos += consumed &~ (1<<30); -+ alsa_stream->pos %= alsa_stream->buffer_size; -+ } -+ -+ if (alsa_stream->substream) { -+ if (new_period) -+ snd_pcm_period_elapsed(alsa_stream->substream); -+ } else { -+ audio_warning(" unexpected NULL substream\n"); -+ } -+ audio_info(" .. OUT\n"); -+ -+ return IRQ_HANDLED; -+} -+ -+/* open callback */ -+static int snd_bcm2835_playback_open_generic( -+ struct snd_pcm_substream *substream, int spdif) -+{ -+ bcm2835_chip_t *chip = snd_pcm_substream_chip(substream); -+ struct snd_pcm_runtime *runtime = substream->runtime; -+ bcm2835_alsa_stream_t *alsa_stream; -+ int idx; -+ int err; -+ -+ audio_info(" .. IN (%d)\n", substream->number); -+ -+ if(mutex_lock_interruptible(&chip->audio_mutex)) -+ { -+ audio_error("Interrupted whilst waiting for lock\n"); -+ return -EINTR; -+ } -+ audio_info("Alsa open (%d)\n", substream->number); -+ idx = substream->number; -+ -+ if (spdif && chip->opened != 0) { -+ err = -EBUSY; -+ goto out; -+ } -+ else if (!spdif && (chip->opened & (1 << idx))) { -+ err = -EBUSY; -+ goto out; -+ } -+ if (idx > MAX_SUBSTREAMS) { -+ audio_error -+ ("substream(%d) device doesn't exist max(%d) substreams allowed\n", -+ idx, MAX_SUBSTREAMS); -+ err = -ENODEV; -+ goto out; -+ } -+ -+ /* Check if we are ready */ -+ if (!(chip->avail_substreams & (1 << idx))) { -+ /* We are not ready yet */ -+ audio_error("substream(%d) device is not ready yet\n", idx); -+ err = -EAGAIN; -+ goto out; -+ } -+ -+ alsa_stream = kzalloc(sizeof(bcm2835_alsa_stream_t), GFP_KERNEL); -+ if (alsa_stream == NULL) { -+ err = -ENOMEM; -+ goto out; -+ } -+ -+ /* Initialise alsa_stream */ -+ alsa_stream->chip = chip; -+ alsa_stream->substream = substream; -+ alsa_stream->idx = idx; -+ -+ sema_init(&alsa_stream->buffers_update_sem, 0); -+ sema_init(&alsa_stream->control_sem, 0); -+ spin_lock_init(&alsa_stream->lock); -+ -+ /* Enabled in start trigger, called on each "fifo irq" after that */ -+ alsa_stream->enable_fifo_irq = 0; -+ alsa_stream->fifo_irq_handler = bcm2835_playback_fifo_irq; -+ -+ err = bcm2835_audio_open(alsa_stream); -+ if (err != 0) { -+ kfree(alsa_stream); -+ goto out; -+ } -+ runtime->private_data = alsa_stream; -+ runtime->private_free = snd_bcm2835_playback_free; -+ if (spdif) { -+ runtime->hw = snd_bcm2835_playback_spdif_hw; -+ } else { -+ /* clear spdif status, as we are not in spdif mode */ -+ chip->spdif_status = 0; -+ runtime->hw = snd_bcm2835_playback_hw; -+ } -+ /* minimum 16 bytes alignment (for vchiq bulk transfers) */ -+ snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES, -+ 16); -+ -+ chip->alsa_stream[idx] = alsa_stream; -+ -+ chip->opened |= (1 << idx); -+ alsa_stream->open = 1; -+ alsa_stream->draining = 1; -+ -+out: -+ mutex_unlock(&chip->audio_mutex); -+ -+ audio_info(" .. OUT =%d\n", err); -+ -+ return err; -+} -+ -+static int snd_bcm2835_playback_open(struct snd_pcm_substream *substream) -+{ -+ return snd_bcm2835_playback_open_generic(substream, 0); -+} -+ -+static int snd_bcm2835_playback_spdif_open(struct snd_pcm_substream *substream) -+{ -+ return snd_bcm2835_playback_open_generic(substream, 1); -+} -+ -+/* close callback */ -+static int snd_bcm2835_playback_close(struct snd_pcm_substream *substream) -+{ -+ /* the hardware-specific codes will be here */ -+ -+ bcm2835_chip_t *chip; -+ struct snd_pcm_runtime *runtime; -+ bcm2835_alsa_stream_t *alsa_stream; -+ -+ audio_info(" .. IN\n"); -+ -+ chip = snd_pcm_substream_chip(substream); -+ if(mutex_lock_interruptible(&chip->audio_mutex)) -+ { -+ audio_error("Interrupted whilst waiting for lock\n"); -+ return -EINTR; -+ } -+ runtime = substream->runtime; -+ alsa_stream = runtime->private_data; -+ -+ audio_info("Alsa close\n"); -+ -+ /* -+ * Call stop if it's still running. This happens when app -+ * is force killed and we don't get a stop trigger. -+ */ -+ if (alsa_stream->running) { -+ int err; -+ err = bcm2835_audio_stop(alsa_stream); -+ alsa_stream->running = 0; -+ if (err != 0) -+ audio_error(" Failed to STOP alsa device\n"); -+ } -+ -+ alsa_stream->period_size = 0; -+ alsa_stream->buffer_size = 0; -+ -+ if (alsa_stream->open) { -+ alsa_stream->open = 0; -+ bcm2835_audio_close(alsa_stream); -+ } -+ if (alsa_stream->chip) -+ alsa_stream->chip->alsa_stream[alsa_stream->idx] = NULL; -+ /* -+ * Do not free up alsa_stream here, it will be freed up by -+ * runtime->private_free callback we registered in *_open above -+ */ -+ -+ chip->opened &= ~(1 << substream->number); -+ -+ mutex_unlock(&chip->audio_mutex); -+ audio_info(" .. OUT\n"); -+ -+ return 0; -+} -+ -+/* hw_params callback */ -+static int snd_bcm2835_pcm_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ struct snd_pcm_runtime *runtime = substream->runtime; -+ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; -+ int err; -+ -+ audio_info(" .. IN\n"); -+ -+ err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); -+ if (err < 0) { -+ audio_error -+ (" pcm_lib_malloc failed to allocated pages for buffers\n"); -+ return err; -+ } -+ -+ alsa_stream->channels = params_channels(params); -+ alsa_stream->params_rate = params_rate(params); -+ alsa_stream->pcm_format_width = snd_pcm_format_width(params_format (params)); -+ audio_info(" .. OUT\n"); -+ -+ return err; -+} -+ -+/* hw_free callback */ -+static int snd_bcm2835_pcm_hw_free(struct snd_pcm_substream *substream) -+{ -+ audio_info(" .. IN\n"); -+ return snd_pcm_lib_free_pages(substream); -+} -+ -+/* prepare callback */ -+static int snd_bcm2835_pcm_prepare(struct snd_pcm_substream *substream) -+{ -+ bcm2835_chip_t *chip = snd_pcm_substream_chip(substream); -+ struct snd_pcm_runtime *runtime = substream->runtime; -+ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; -+ int channels; -+ int err; -+ -+ audio_info(" .. IN\n"); -+ -+ if (mutex_lock_interruptible(&chip->audio_mutex)) -+ return -EINTR; -+ -+ /* notify the vchiq that it should enter spdif passthrough mode by -+ * setting channels=0 (see -+ * https://github.com/raspberrypi/linux/issues/528) */ -+ if (chip->spdif_status & IEC958_AES0_NONAUDIO) -+ channels = 0; -+ else -+ channels = alsa_stream->channels; -+ -+ err = bcm2835_audio_set_params(alsa_stream, channels, -+ alsa_stream->params_rate, -+ alsa_stream->pcm_format_width); -+ if (err < 0) { -+ audio_error(" error setting hw params\n"); -+ } -+ -+ bcm2835_audio_setup(alsa_stream); -+ -+ /* in preparation of the stream, set the controls (volume level) of the stream */ -+ bcm2835_audio_set_ctls(alsa_stream->chip); -+ -+ -+ memset(&alsa_stream->pcm_indirect, 0, sizeof(alsa_stream->pcm_indirect)); -+ -+ alsa_stream->pcm_indirect.hw_buffer_size = -+ alsa_stream->pcm_indirect.sw_buffer_size = -+ snd_pcm_lib_buffer_bytes(substream); -+ -+ alsa_stream->buffer_size = snd_pcm_lib_buffer_bytes(substream); -+ alsa_stream->period_size = snd_pcm_lib_period_bytes(substream); -+ alsa_stream->pos = 0; -+ -+ audio_debug("buffer_size=%d, period_size=%d pos=%d frame_bits=%d\n", -+ alsa_stream->buffer_size, alsa_stream->period_size, -+ alsa_stream->pos, runtime->frame_bits); -+ -+ mutex_unlock(&chip->audio_mutex); -+ audio_info(" .. OUT\n"); -+ return 0; -+} -+ -+static void snd_bcm2835_pcm_transfer(struct snd_pcm_substream *substream, -+ struct snd_pcm_indirect *rec, size_t bytes) -+{ -+ struct snd_pcm_runtime *runtime = substream->runtime; -+ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; -+ void *src = (void *)(substream->runtime->dma_area + rec->sw_data); -+ int err; -+ -+ err = bcm2835_audio_write(alsa_stream, bytes, src); -+ if (err) -+ audio_error(" Failed to transfer to alsa device (%d)\n", err); -+ -+} -+ -+static int snd_bcm2835_pcm_ack(struct snd_pcm_substream *substream) -+{ -+ struct snd_pcm_runtime *runtime = substream->runtime; -+ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; -+ struct snd_pcm_indirect *pcm_indirect = &alsa_stream->pcm_indirect; -+ -+ pcm_indirect->hw_queue_size = runtime->hw.buffer_bytes_max; -+ snd_pcm_indirect_playback_transfer(substream, pcm_indirect, -+ snd_bcm2835_pcm_transfer); -+ return 0; -+} -+ -+/* trigger callback */ -+static int snd_bcm2835_pcm_trigger(struct snd_pcm_substream *substream, int cmd) -+{ -+ struct snd_pcm_runtime *runtime = substream->runtime; -+ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; -+ int err = 0; -+ -+ audio_info(" .. IN\n"); -+ -+ switch (cmd) { -+ case SNDRV_PCM_TRIGGER_START: -+ audio_debug("bcm2835_AUDIO_TRIGGER_START running=%d\n", -+ alsa_stream->running); -+ if (!alsa_stream->running) { -+ err = bcm2835_audio_start(alsa_stream); -+ if (err == 0) { -+ alsa_stream->pcm_indirect.hw_io = -+ alsa_stream->pcm_indirect.hw_data = -+ bytes_to_frames(runtime, -+ alsa_stream->pos); -+ substream->ops->ack(substream); -+ alsa_stream->running = 1; -+ alsa_stream->draining = 1; -+ } else { -+ audio_error(" Failed to START alsa device (%d)\n", err); -+ } -+ } -+ break; -+ case SNDRV_PCM_TRIGGER_STOP: -+ audio_debug -+ ("bcm2835_AUDIO_TRIGGER_STOP running=%d draining=%d\n", -+ alsa_stream->running, runtime->status->state == SNDRV_PCM_STATE_DRAINING); -+ if (runtime->status->state == SNDRV_PCM_STATE_DRAINING) { -+ audio_info("DRAINING\n"); -+ alsa_stream->draining = 1; -+ } else { -+ audio_info("DROPPING\n"); -+ alsa_stream->draining = 0; -+ } -+ if (alsa_stream->running) { -+ err = bcm2835_audio_stop(alsa_stream); -+ if (err != 0) -+ audio_error(" Failed to STOP alsa device (%d)\n", err); -+ alsa_stream->running = 0; -+ } -+ break; -+ default: -+ err = -EINVAL; -+ } -+ -+ audio_info(" .. OUT\n"); -+ return err; -+} -+ -+/* pointer callback */ -+static snd_pcm_uframes_t -+snd_bcm2835_pcm_pointer(struct snd_pcm_substream *substream) -+{ -+ struct snd_pcm_runtime *runtime = substream->runtime; -+ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; -+ -+ audio_info(" .. IN\n"); -+ -+ audio_debug("pcm_pointer... (%d) hwptr=%d appl=%d pos=%d\n", 0, -+ frames_to_bytes(runtime, runtime->status->hw_ptr), -+ frames_to_bytes(runtime, runtime->control->appl_ptr), -+ alsa_stream->pos); -+ -+ audio_info(" .. OUT\n"); -+ return snd_pcm_indirect_playback_pointer(substream, -+ &alsa_stream->pcm_indirect, -+ alsa_stream->pos); -+} -+ -+static int snd_bcm2835_pcm_lib_ioctl(struct snd_pcm_substream *substream, -+ unsigned int cmd, void *arg) -+{ -+ int ret = snd_pcm_lib_ioctl(substream, cmd, arg); -+ audio_info(" .. substream=%p, cmd=%d, arg=%p (%x) ret=%d\n", substream, -+ cmd, arg, arg ? *(unsigned *)arg : 0, ret); -+ return ret; -+} -+ -+/* operators */ -+static struct snd_pcm_ops snd_bcm2835_playback_ops = { -+ .open = snd_bcm2835_playback_open, -+ .close = snd_bcm2835_playback_close, -+ .ioctl = snd_bcm2835_pcm_lib_ioctl, -+ .hw_params = snd_bcm2835_pcm_hw_params, -+ .hw_free = snd_bcm2835_pcm_hw_free, -+ .prepare = snd_bcm2835_pcm_prepare, -+ .trigger = snd_bcm2835_pcm_trigger, -+ .pointer = snd_bcm2835_pcm_pointer, -+ .ack = snd_bcm2835_pcm_ack, -+}; -+ -+static struct snd_pcm_ops snd_bcm2835_playback_spdif_ops = { -+ .open = snd_bcm2835_playback_spdif_open, -+ .close = snd_bcm2835_playback_close, -+ .ioctl = snd_bcm2835_pcm_lib_ioctl, -+ .hw_params = snd_bcm2835_pcm_hw_params, -+ .hw_free = snd_bcm2835_pcm_hw_free, -+ .prepare = snd_bcm2835_pcm_prepare, -+ .trigger = snd_bcm2835_pcm_trigger, -+ .pointer = snd_bcm2835_pcm_pointer, -+ .ack = snd_bcm2835_pcm_ack, -+}; -+ -+/* create a pcm device */ -+int snd_bcm2835_new_pcm(bcm2835_chip_t * chip) -+{ -+ struct snd_pcm *pcm; -+ int err; -+ -+ audio_info(" .. IN\n"); -+ mutex_init(&chip->audio_mutex); -+ if(mutex_lock_interruptible(&chip->audio_mutex)) -+ { -+ audio_error("Interrupted whilst waiting for lock\n"); -+ return -EINTR; -+ } -+ err = -+ snd_pcm_new(chip->card, "bcm2835 ALSA", 0, MAX_SUBSTREAMS, 0, &pcm); -+ if (err < 0) -+ goto out; -+ pcm->private_data = chip; -+ strcpy(pcm->name, "bcm2835 ALSA"); -+ chip->pcm = pcm; -+ chip->dest = AUDIO_DEST_AUTO; -+ chip->volume = alsa2chip(0); -+ chip->mute = CTRL_VOL_UNMUTE; /*disable mute on startup */ -+ /* set operators */ -+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, -+ &snd_bcm2835_playback_ops); -+ -+ /* pre-allocation of buffers */ -+ /* NOTE: this may fail */ -+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, -+ snd_dma_continuous_data (GFP_KERNEL), -+ snd_bcm2835_playback_hw.buffer_bytes_max, snd_bcm2835_playback_hw.buffer_bytes_max); -+ -+ -+out: -+ mutex_unlock(&chip->audio_mutex); -+ audio_info(" .. OUT\n"); -+ -+ return 0; -+} -+ -+int snd_bcm2835_new_spdif_pcm(bcm2835_chip_t * chip) -+{ -+ struct snd_pcm *pcm; -+ int err; -+ -+ audio_info(" .. IN\n"); -+ if(mutex_lock_interruptible(&chip->audio_mutex)) -+ { -+ audio_error("Interrupted whilst waiting for lock\n"); -+ return -EINTR; -+ } -+ err = snd_pcm_new(chip->card, "bcm2835 ALSA", 1, 1, 0, &pcm); -+ if (err < 0) -+ goto out; -+ -+ pcm->private_data = chip; -+ strcpy(pcm->name, "bcm2835 IEC958/HDMI"); -+ chip->pcm_spdif = pcm; -+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, -+ &snd_bcm2835_playback_spdif_ops); -+ -+ /* pre-allocation of buffers */ -+ /* NOTE: this may fail */ -+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, -+ snd_dma_continuous_data (GFP_KERNEL), -+ snd_bcm2835_playback_spdif_hw.buffer_bytes_max, snd_bcm2835_playback_spdif_hw.buffer_bytes_max); -+out: -+ mutex_unlock(&chip->audio_mutex); -+ audio_info(" .. OUT\n"); -+ -+ return 0; -+} ---- /dev/null -+++ b/sound/arm/bcm2835-vchiq.c -@@ -0,0 +1,889 @@ -+/***************************************************************************** -+* Copyright 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "bcm2835.h" -+ -+/* ---- Include Files -------------------------------------------------------- */ -+ -+#include "interface/vchi/vchi.h" -+#include "vc_vchi_audioserv_defs.h" -+ -+/* ---- Private Constants and Types ------------------------------------------ */ -+ -+#define BCM2835_AUDIO_STOP 0 -+#define BCM2835_AUDIO_START 1 -+#define BCM2835_AUDIO_WRITE 2 -+ -+/* Logging macros (for remapping to other logging mechanisms, i.e., printf) */ -+#ifdef AUDIO_DEBUG_ENABLE -+ #define LOG_ERR( fmt, arg... ) pr_err( "%s:%d " fmt, __func__, __LINE__, ##arg) -+ #define LOG_WARN( fmt, arg... ) pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg) -+ #define LOG_INFO( fmt, arg... ) pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg) -+ #define LOG_DBG( fmt, arg... ) pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg) -+#else -+ #define LOG_ERR( fmt, arg... ) pr_err( "%s:%d " fmt, __func__, __LINE__, ##arg) -+ #define LOG_WARN( fmt, arg... ) -+ #define LOG_INFO( fmt, arg... ) -+ #define LOG_DBG( fmt, arg... ) -+#endif -+ -+typedef struct opaque_AUDIO_INSTANCE_T { -+ uint32_t num_connections; -+ VCHI_SERVICE_HANDLE_T vchi_handle[VCHI_MAX_NUM_CONNECTIONS]; -+ struct completion msg_avail_comp; -+ struct mutex vchi_mutex; -+ bcm2835_alsa_stream_t *alsa_stream; -+ int32_t result; -+ short peer_version; -+} AUDIO_INSTANCE_T; -+ -+bool force_bulk = false; -+ -+/* ---- Private Variables ---------------------------------------------------- */ -+ -+/* ---- Private Function Prototypes ------------------------------------------ */ -+ -+/* ---- Private Functions ---------------------------------------------------- */ -+ -+static int bcm2835_audio_stop_worker(bcm2835_alsa_stream_t * alsa_stream); -+static int bcm2835_audio_start_worker(bcm2835_alsa_stream_t * alsa_stream); -+static int bcm2835_audio_write_worker(bcm2835_alsa_stream_t *alsa_stream, -+ uint32_t count, void *src); -+ -+typedef struct { -+ struct work_struct my_work; -+ bcm2835_alsa_stream_t *alsa_stream; -+ int cmd; -+ void *src; -+ uint32_t count; -+} my_work_t; -+ -+static void my_wq_function(struct work_struct *work) -+{ -+ my_work_t *w = (my_work_t *) work; -+ int ret = -9; -+ LOG_DBG(" .. IN %p:%d\n", w->alsa_stream, w->cmd); -+ switch (w->cmd) { -+ case BCM2835_AUDIO_START: -+ ret = bcm2835_audio_start_worker(w->alsa_stream); -+ break; -+ case BCM2835_AUDIO_STOP: -+ ret = bcm2835_audio_stop_worker(w->alsa_stream); -+ break; -+ case BCM2835_AUDIO_WRITE: -+ ret = bcm2835_audio_write_worker(w->alsa_stream, w->count, -+ w->src); -+ break; -+ default: -+ LOG_ERR(" Unexpected work: %p:%d\n", w->alsa_stream, w->cmd); -+ break; -+ } -+ kfree((void *)work); -+ LOG_DBG(" .. OUT %d\n", ret); -+} -+ -+int bcm2835_audio_start(bcm2835_alsa_stream_t * alsa_stream) -+{ -+ int ret = -1; -+ LOG_DBG(" .. IN\n"); -+ if (alsa_stream->my_wq) { -+ my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC); -+ /*--- Queue some work (item 1) ---*/ -+ if (work) { -+ INIT_WORK((struct work_struct *)work, my_wq_function); -+ work->alsa_stream = alsa_stream; -+ work->cmd = BCM2835_AUDIO_START; -+ if (queue_work -+ (alsa_stream->my_wq, (struct work_struct *)work)) -+ ret = 0; -+ } else -+ LOG_ERR(" .. Error: NULL work kmalloc\n"); -+ } -+ LOG_DBG(" .. OUT %d\n", ret); -+ return ret; -+} -+ -+int bcm2835_audio_stop(bcm2835_alsa_stream_t * alsa_stream) -+{ -+ int ret = -1; -+ LOG_DBG(" .. IN\n"); -+ if (alsa_stream->my_wq) { -+ my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC); -+ /*--- Queue some work (item 1) ---*/ -+ if (work) { -+ INIT_WORK((struct work_struct *)work, my_wq_function); -+ work->alsa_stream = alsa_stream; -+ work->cmd = BCM2835_AUDIO_STOP; -+ if (queue_work -+ (alsa_stream->my_wq, (struct work_struct *)work)) -+ ret = 0; -+ } else -+ LOG_ERR(" .. Error: NULL work kmalloc\n"); -+ } -+ LOG_DBG(" .. OUT %d\n", ret); -+ return ret; -+} -+ -+int bcm2835_audio_write(bcm2835_alsa_stream_t *alsa_stream, -+ uint32_t count, void *src) -+{ -+ int ret = -1; -+ LOG_DBG(" .. IN\n"); -+ if (alsa_stream->my_wq) { -+ my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC); -+ /*--- Queue some work (item 1) ---*/ -+ if (work) { -+ INIT_WORK((struct work_struct *)work, my_wq_function); -+ work->alsa_stream = alsa_stream; -+ work->cmd = BCM2835_AUDIO_WRITE; -+ work->src = src; -+ work->count = count; -+ if (queue_work -+ (alsa_stream->my_wq, (struct work_struct *)work)) -+ ret = 0; -+ } else -+ LOG_ERR(" .. Error: NULL work kmalloc\n"); -+ } -+ LOG_DBG(" .. OUT %d\n", ret); -+ return ret; -+} -+ -+void my_workqueue_init(bcm2835_alsa_stream_t * alsa_stream) -+{ -+ alsa_stream->my_wq = alloc_workqueue("my_queue", WQ_HIGHPRI, 1); -+ return; -+} -+ -+void my_workqueue_quit(bcm2835_alsa_stream_t * alsa_stream) -+{ -+ if (alsa_stream->my_wq) { -+ flush_workqueue(alsa_stream->my_wq); -+ destroy_workqueue(alsa_stream->my_wq); -+ alsa_stream->my_wq = NULL; -+ } -+ return; -+} -+ -+static void audio_vchi_callback(void *param, -+ const VCHI_CALLBACK_REASON_T reason, -+ void *msg_handle) -+{ -+ AUDIO_INSTANCE_T *instance = (AUDIO_INSTANCE_T *) param; -+ int32_t status; -+ int32_t msg_len; -+ VC_AUDIO_MSG_T m; -+ LOG_DBG(" .. IN instance=%p, handle=%p, alsa=%p, reason=%d, handle=%p\n", -+ instance, instance ? instance->vchi_handle[0] : NULL, instance ? instance->alsa_stream : NULL, reason, msg_handle); -+ -+ if (reason != VCHI_CALLBACK_MSG_AVAILABLE) { -+ return; -+ } -+ if (!instance) { -+ LOG_ERR(" .. instance is null\n"); -+ BUG(); -+ return; -+ } -+ if (!instance->vchi_handle[0]) { -+ LOG_ERR(" .. instance->vchi_handle[0] is null\n"); -+ BUG(); -+ return; -+ } -+ status = vchi_msg_dequeue(instance->vchi_handle[0], -+ &m, sizeof m, &msg_len, VCHI_FLAGS_NONE); -+ if (m.type == VC_AUDIO_MSG_TYPE_RESULT) { -+ LOG_DBG -+ (" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_RESULT, success=%d\n", -+ instance, m.u.result.success); -+ instance->result = m.u.result.success; -+ complete(&instance->msg_avail_comp); -+ } else if (m.type == VC_AUDIO_MSG_TYPE_COMPLETE) { -+ bcm2835_alsa_stream_t *alsa_stream = instance->alsa_stream; -+ irq_handler_t callback = (irq_handler_t) m.u.complete.callback; -+ LOG_DBG -+ (" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_COMPLETE, complete=%d\n", -+ instance, m.u.complete.count); -+ if (alsa_stream && callback) { -+ atomic_add(m.u.complete.count, &alsa_stream->retrieved); -+ callback(0, alsa_stream); -+ } else { -+ LOG_ERR(" .. unexpected alsa_stream=%p, callback=%p\n", -+ alsa_stream, callback); -+ } -+ } else { -+ LOG_ERR(" .. unexpected m.type=%d\n", m.type); -+ } -+ LOG_DBG(" .. OUT\n"); -+} -+ -+static AUDIO_INSTANCE_T *vc_vchi_audio_init(VCHI_INSTANCE_T vchi_instance, -+ VCHI_CONNECTION_T ** -+ vchi_connections, -+ uint32_t num_connections) -+{ -+ uint32_t i; -+ AUDIO_INSTANCE_T *instance; -+ int status; -+ -+ LOG_DBG("%s: start", __func__); -+ -+ if (num_connections > VCHI_MAX_NUM_CONNECTIONS) { -+ LOG_ERR("%s: unsupported number of connections %u (max=%u)\n", -+ __func__, num_connections, VCHI_MAX_NUM_CONNECTIONS); -+ -+ return NULL; -+ } -+ /* Allocate memory for this instance */ -+ instance = kmalloc(sizeof(*instance), GFP_KERNEL); -+ if (!instance) -+ return NULL; -+ -+ memset(instance, 0, sizeof(*instance)); -+ instance->num_connections = num_connections; -+ -+ /* Create a lock for exclusive, serialized VCHI connection access */ -+ mutex_init(&instance->vchi_mutex); -+ /* Open the VCHI service connections */ -+ for (i = 0; i < num_connections; i++) { -+ SERVICE_CREATION_T params = { -+ VCHI_VERSION_EX(VC_AUDIOSERV_VER, VC_AUDIOSERV_MIN_VER), -+ VC_AUDIO_SERVER_NAME, // 4cc service code -+ vchi_connections[i], // passed in fn pointers -+ 0, // rx fifo size (unused) -+ 0, // tx fifo size (unused) -+ audio_vchi_callback, // service callback -+ instance, // service callback parameter -+ 1, //TODO: remove VCOS_FALSE, // unaligned bulk recieves -+ 1, //TODO: remove VCOS_FALSE, // unaligned bulk transmits -+ 0 // want crc check on bulk transfers -+ }; -+ -+ LOG_DBG("%s: about to open %i\n", __func__, i); -+ status = vchi_service_open(vchi_instance, ¶ms, -+ &instance->vchi_handle[i]); -+ LOG_DBG("%s: opened %i: %p=%d\n", __func__, i, instance->vchi_handle[i], status); -+ if (status) { -+ LOG_ERR -+ ("%s: failed to open VCHI service connection (status=%d)\n", -+ __func__, status); -+ -+ goto err_close_services; -+ } -+ /* Finished with the service for now */ -+ vchi_service_release(instance->vchi_handle[i]); -+ } -+ -+ LOG_DBG("%s: okay\n", __func__); -+ return instance; -+ -+err_close_services: -+ for (i = 0; i < instance->num_connections; i++) { -+ LOG_ERR("%s: closing %i: %p\n", __func__, i, instance->vchi_handle[i]); -+ if (instance->vchi_handle[i]) -+ vchi_service_close(instance->vchi_handle[i]); -+ } -+ -+ kfree(instance); -+ LOG_ERR("%s: error\n", __func__); -+ -+ return NULL; -+} -+ -+static int32_t vc_vchi_audio_deinit(AUDIO_INSTANCE_T * instance) -+{ -+ uint32_t i; -+ -+ LOG_DBG(" .. IN\n"); -+ -+ if (instance == NULL) { -+ LOG_ERR("%s: invalid handle %p\n", __func__, instance); -+ -+ return -1; -+ } -+ -+ LOG_DBG(" .. about to lock (%d)\n", instance->num_connections); -+ if(mutex_lock_interruptible(&instance->vchi_mutex)) -+ { -+ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); -+ return -EINTR; -+ } -+ -+ /* Close all VCHI service connections */ -+ for (i = 0; i < instance->num_connections; i++) { -+ int32_t success; -+ LOG_DBG(" .. %i:closing %p\n", i, instance->vchi_handle[i]); -+ vchi_service_use(instance->vchi_handle[i]); -+ -+ success = vchi_service_close(instance->vchi_handle[i]); -+ if (success != 0) { -+ LOG_DBG -+ ("%s: failed to close VCHI service connection (status=%d)\n", -+ __func__, success); -+ } -+ } -+ -+ mutex_unlock(&instance->vchi_mutex); -+ -+ kfree(instance); -+ -+ LOG_DBG(" .. OUT\n"); -+ -+ return 0; -+} -+ -+static int bcm2835_audio_open_connection(bcm2835_alsa_stream_t * alsa_stream) -+{ -+ static VCHI_INSTANCE_T vchi_instance; -+ static VCHI_CONNECTION_T *vchi_connection; -+ static int initted; -+ AUDIO_INSTANCE_T *instance = alsa_stream->instance; -+ int ret; -+ LOG_DBG(" .. IN\n"); -+ -+ LOG_INFO("%s: start\n", __func__); -+ BUG_ON(instance); -+ if (instance) { -+ LOG_ERR("%s: VCHI instance already open (%p)\n", -+ __func__, instance); -+ instance->alsa_stream = alsa_stream; -+ alsa_stream->instance = instance; -+ ret = 0; // xxx todo -1; -+ goto err_free_mem; -+ } -+ -+ /* Initialize and create a VCHI connection */ -+ if (!initted) { -+ ret = vchi_initialise(&vchi_instance); -+ if (ret != 0) { -+ LOG_ERR("%s: failed to initialise VCHI instance (ret=%d)\n", -+ __func__, ret); -+ -+ ret = -EIO; -+ goto err_free_mem; -+ } -+ ret = vchi_connect(NULL, 0, vchi_instance); -+ if (ret != 0) { -+ LOG_ERR("%s: failed to connect VCHI instance (ret=%d)\n", -+ __func__, ret); -+ -+ ret = -EIO; -+ goto err_free_mem; -+ } -+ initted = 1; -+ } -+ -+ /* Initialize an instance of the audio service */ -+ instance = vc_vchi_audio_init(vchi_instance, &vchi_connection, 1); -+ -+ if (instance == NULL) { -+ LOG_ERR("%s: failed to initialize audio service\n", __func__); -+ -+ ret = -EPERM; -+ goto err_free_mem; -+ } -+ -+ instance->alsa_stream = alsa_stream; -+ alsa_stream->instance = instance; -+ -+ LOG_DBG(" success !\n"); -+err_free_mem: -+ LOG_DBG(" .. OUT\n"); -+ -+ return ret; -+} -+ -+int bcm2835_audio_open(bcm2835_alsa_stream_t * alsa_stream) -+{ -+ AUDIO_INSTANCE_T *instance; -+ VC_AUDIO_MSG_T m; -+ int32_t success; -+ int ret; -+ LOG_DBG(" .. IN\n"); -+ -+ my_workqueue_init(alsa_stream); -+ -+ ret = bcm2835_audio_open_connection(alsa_stream); -+ if (ret != 0) { -+ ret = -1; -+ goto exit; -+ } -+ instance = alsa_stream->instance; -+ LOG_DBG(" instance (%p)\n", instance); -+ -+ if(mutex_lock_interruptible(&instance->vchi_mutex)) -+ { -+ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); -+ return -EINTR; -+ } -+ vchi_service_use(instance->vchi_handle[0]); -+ -+ m.type = VC_AUDIO_MSG_TYPE_OPEN; -+ -+ /* Send the message to the videocore */ -+ success = vchi_msg_queue(instance->vchi_handle[0], -+ &m, sizeof m, -+ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); -+ -+ if (success != 0) { -+ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", -+ __func__, success); -+ -+ ret = -1; -+ goto unlock; -+ } -+ -+ ret = 0; -+ -+unlock: -+ vchi_service_release(instance->vchi_handle[0]); -+ mutex_unlock(&instance->vchi_mutex); -+exit: -+ LOG_DBG(" .. OUT\n"); -+ return ret; -+} -+ -+static int bcm2835_audio_set_ctls_chan(bcm2835_alsa_stream_t * alsa_stream, -+ bcm2835_chip_t * chip) -+{ -+ VC_AUDIO_MSG_T m; -+ AUDIO_INSTANCE_T *instance = alsa_stream->instance; -+ int32_t success; -+ int ret; -+ LOG_DBG(" .. IN\n"); -+ -+ LOG_INFO -+ (" Setting ALSA dest(%d), volume(%d)\n", chip->dest, chip->volume); -+ -+ if(mutex_lock_interruptible(&instance->vchi_mutex)) -+ { -+ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); -+ return -EINTR; -+ } -+ vchi_service_use(instance->vchi_handle[0]); -+ -+ instance->result = -1; -+ -+ m.type = VC_AUDIO_MSG_TYPE_CONTROL; -+ m.u.control.dest = chip->dest; -+ m.u.control.volume = chip->volume; -+ -+ /* Create the message available completion */ -+ init_completion(&instance->msg_avail_comp); -+ -+ /* Send the message to the videocore */ -+ success = vchi_msg_queue(instance->vchi_handle[0], -+ &m, sizeof m, -+ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); -+ -+ if (success != 0) { -+ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", -+ __func__, success); -+ -+ ret = -1; -+ goto unlock; -+ } -+ -+ /* We are expecting a reply from the videocore */ -+ wait_for_completion(&instance->msg_avail_comp); -+ -+ if (instance->result != 0) { -+ LOG_ERR("%s: result=%d\n", __func__, instance->result); -+ -+ ret = -1; -+ goto unlock; -+ } -+ -+ ret = 0; -+ -+unlock: -+ vchi_service_release(instance->vchi_handle[0]); -+ mutex_unlock(&instance->vchi_mutex); -+ -+ LOG_DBG(" .. OUT\n"); -+ return ret; -+} -+ -+int bcm2835_audio_set_ctls(bcm2835_chip_t * chip) -+{ -+ int i; -+ int ret = 0; -+ LOG_DBG(" .. IN\n"); -+ LOG_DBG(" Setting ALSA dest(%d), volume(%d)\n", chip->dest, chip->volume); -+ -+ /* change ctls for all substreams */ -+ for (i = 0; i < MAX_SUBSTREAMS; i++) { -+ if (chip->avail_substreams & (1 << i)) { -+ if (!chip->alsa_stream[i]) -+ { -+ LOG_DBG(" No ALSA stream available?! %i:%p (%x)\n", i, chip->alsa_stream[i], chip->avail_substreams); -+ ret = 0; -+ } -+ else if (bcm2835_audio_set_ctls_chan /* returns 0 on success */ -+ (chip->alsa_stream[i], chip) != 0) -+ { -+ LOG_ERR("Couldn't set the controls for stream %d\n", i); -+ ret = -1; -+ } -+ else LOG_DBG(" Controls set for stream %d\n", i); -+ } -+ } -+ LOG_DBG(" .. OUT ret=%d\n", ret); -+ return ret; -+} -+ -+int bcm2835_audio_set_params(bcm2835_alsa_stream_t * alsa_stream, -+ uint32_t channels, uint32_t samplerate, -+ uint32_t bps) -+{ -+ VC_AUDIO_MSG_T m; -+ AUDIO_INSTANCE_T *instance = alsa_stream->instance; -+ int32_t success; -+ int ret; -+ LOG_DBG(" .. IN\n"); -+ -+ LOG_INFO -+ (" Setting ALSA channels(%d), samplerate(%d), bits-per-sample(%d)\n", -+ channels, samplerate, bps); -+ -+ /* resend ctls - alsa_stream may not have been open when first send */ -+ ret = bcm2835_audio_set_ctls_chan(alsa_stream, alsa_stream->chip); -+ if (ret != 0) { -+ LOG_ERR(" Alsa controls not supported\n"); -+ return -EINVAL; -+ } -+ -+ if(mutex_lock_interruptible(&instance->vchi_mutex)) -+ { -+ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); -+ return -EINTR; -+ } -+ vchi_service_use(instance->vchi_handle[0]); -+ -+ instance->result = -1; -+ -+ m.type = VC_AUDIO_MSG_TYPE_CONFIG; -+ m.u.config.channels = channels; -+ m.u.config.samplerate = samplerate; -+ m.u.config.bps = bps; -+ -+ /* Create the message available completion */ -+ init_completion(&instance->msg_avail_comp); -+ -+ /* Send the message to the videocore */ -+ success = vchi_msg_queue(instance->vchi_handle[0], -+ &m, sizeof m, -+ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); -+ -+ if (success != 0) { -+ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", -+ __func__, success); -+ -+ ret = -1; -+ goto unlock; -+ } -+ -+ /* We are expecting a reply from the videocore */ -+ wait_for_completion(&instance->msg_avail_comp); -+ -+ if (instance->result != 0) { -+ LOG_ERR("%s: result=%d", __func__, instance->result); -+ -+ ret = -1; -+ goto unlock; -+ } -+ -+ ret = 0; -+ -+unlock: -+ vchi_service_release(instance->vchi_handle[0]); -+ mutex_unlock(&instance->vchi_mutex); -+ -+ LOG_DBG(" .. OUT\n"); -+ return ret; -+} -+ -+int bcm2835_audio_setup(bcm2835_alsa_stream_t * alsa_stream) -+{ -+ LOG_DBG(" .. IN\n"); -+ -+ LOG_DBG(" .. OUT\n"); -+ -+ return 0; -+} -+ -+static int bcm2835_audio_start_worker(bcm2835_alsa_stream_t * alsa_stream) -+{ -+ VC_AUDIO_MSG_T m; -+ AUDIO_INSTANCE_T *instance = alsa_stream->instance; -+ int32_t success; -+ int ret; -+ LOG_DBG(" .. IN\n"); -+ -+ if(mutex_lock_interruptible(&instance->vchi_mutex)) -+ { -+ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); -+ return -EINTR; -+ } -+ vchi_service_use(instance->vchi_handle[0]); -+ -+ m.type = VC_AUDIO_MSG_TYPE_START; -+ -+ /* Send the message to the videocore */ -+ success = vchi_msg_queue(instance->vchi_handle[0], -+ &m, sizeof m, -+ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); -+ -+ if (success != 0) { -+ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", -+ __func__, success); -+ -+ ret = -1; -+ goto unlock; -+ } -+ -+ ret = 0; -+ -+unlock: -+ vchi_service_release(instance->vchi_handle[0]); -+ mutex_unlock(&instance->vchi_mutex); -+ LOG_DBG(" .. OUT\n"); -+ return ret; -+} -+ -+static int bcm2835_audio_stop_worker(bcm2835_alsa_stream_t * alsa_stream) -+{ -+ VC_AUDIO_MSG_T m; -+ AUDIO_INSTANCE_T *instance = alsa_stream->instance; -+ int32_t success; -+ int ret; -+ LOG_DBG(" .. IN\n"); -+ -+ if(mutex_lock_interruptible(&instance->vchi_mutex)) -+ { -+ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); -+ return -EINTR; -+ } -+ vchi_service_use(instance->vchi_handle[0]); -+ -+ m.type = VC_AUDIO_MSG_TYPE_STOP; -+ m.u.stop.draining = alsa_stream->draining; -+ -+ /* Send the message to the videocore */ -+ success = vchi_msg_queue(instance->vchi_handle[0], -+ &m, sizeof m, -+ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); -+ -+ if (success != 0) { -+ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", -+ __func__, success); -+ -+ ret = -1; -+ goto unlock; -+ } -+ -+ ret = 0; -+ -+unlock: -+ vchi_service_release(instance->vchi_handle[0]); -+ mutex_unlock(&instance->vchi_mutex); -+ LOG_DBG(" .. OUT\n"); -+ return ret; -+} -+ -+int bcm2835_audio_close(bcm2835_alsa_stream_t * alsa_stream) -+{ -+ VC_AUDIO_MSG_T m; -+ AUDIO_INSTANCE_T *instance = alsa_stream->instance; -+ int32_t success; -+ int ret; -+ LOG_DBG(" .. IN\n"); -+ -+ my_workqueue_quit(alsa_stream); -+ -+ if(mutex_lock_interruptible(&instance->vchi_mutex)) -+ { -+ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); -+ return -EINTR; -+ } -+ vchi_service_use(instance->vchi_handle[0]); -+ -+ m.type = VC_AUDIO_MSG_TYPE_CLOSE; -+ -+ /* Create the message available completion */ -+ init_completion(&instance->msg_avail_comp); -+ -+ /* Send the message to the videocore */ -+ success = vchi_msg_queue(instance->vchi_handle[0], -+ &m, sizeof m, -+ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); -+ -+ if (success != 0) { -+ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", -+ __func__, success); -+ ret = -1; -+ goto unlock; -+ } -+ -+ /* We are expecting a reply from the videocore */ -+ wait_for_completion(&instance->msg_avail_comp); -+ -+ if (instance->result != 0) { -+ LOG_ERR("%s: failed result (result=%d)\n", -+ __func__, instance->result); -+ -+ ret = -1; -+ goto unlock; -+ } -+ -+ ret = 0; -+ -+unlock: -+ vchi_service_release(instance->vchi_handle[0]); -+ mutex_unlock(&instance->vchi_mutex); -+ -+ /* Stop the audio service */ -+ if (instance) { -+ vc_vchi_audio_deinit(instance); -+ alsa_stream->instance = NULL; -+ } -+ LOG_DBG(" .. OUT\n"); -+ return ret; -+} -+ -+int bcm2835_audio_write_worker(bcm2835_alsa_stream_t *alsa_stream, -+ uint32_t count, void *src) -+{ -+ VC_AUDIO_MSG_T m; -+ AUDIO_INSTANCE_T *instance = alsa_stream->instance; -+ int32_t success; -+ int ret; -+ -+ LOG_DBG(" .. IN\n"); -+ -+ LOG_INFO(" Writing %d bytes from %p\n", count, src); -+ -+ if(mutex_lock_interruptible(&instance->vchi_mutex)) -+ { -+ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); -+ return -EINTR; -+ } -+ vchi_service_use(instance->vchi_handle[0]); -+ -+ if ( instance->peer_version==0 && vchi_get_peer_version(instance->vchi_handle[0], &instance->peer_version) == 0 ) { -+ LOG_DBG("%s: client version %d connected\n", __func__, instance->peer_version); -+ } -+ m.type = VC_AUDIO_MSG_TYPE_WRITE; -+ m.u.write.count = count; -+ // old version uses bulk, new version uses control -+ m.u.write.max_packet = instance->peer_version < 2 || force_bulk ? 0:4000; -+ m.u.write.callback = alsa_stream->fifo_irq_handler; -+ m.u.write.cookie = alsa_stream; -+ m.u.write.silence = src == NULL; -+ -+ /* Send the message to the videocore */ -+ success = vchi_msg_queue(instance->vchi_handle[0], -+ &m, sizeof m, -+ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); -+ -+ if (success != 0) { -+ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", -+ __func__, success); -+ -+ ret = -1; -+ goto unlock; -+ } -+ if (!m.u.write.silence) { -+ if (m.u.write.max_packet == 0) { -+ /* Send the message to the videocore */ -+ success = vchi_bulk_queue_transmit(instance->vchi_handle[0], -+ src, count, -+ 0 * -+ VCHI_FLAGS_BLOCK_UNTIL_QUEUED -+ + -+ 1 * -+ VCHI_FLAGS_BLOCK_UNTIL_DATA_READ, -+ NULL); -+ } else { -+ while (count > 0) { -+ int bytes = min((int)m.u.write.max_packet, (int)count); -+ success = vchi_msg_queue(instance->vchi_handle[0], -+ src, bytes, -+ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); -+ src = (char *)src + bytes; -+ count -= bytes; -+ } -+ } -+ if (success != 0) { -+ LOG_ERR -+ ("%s: failed on vchi_bulk_queue_transmit (status=%d)\n", -+ __func__, success); -+ -+ ret = -1; -+ goto unlock; -+ } -+ } -+ ret = 0; -+ -+unlock: -+ vchi_service_release(instance->vchi_handle[0]); -+ mutex_unlock(&instance->vchi_mutex); -+ LOG_DBG(" .. OUT\n"); -+ return ret; -+} -+ -+/** -+ * Returns all buffers from arm->vc -+ */ -+void bcm2835_audio_flush_buffers(bcm2835_alsa_stream_t * alsa_stream) -+{ -+ LOG_DBG(" .. IN\n"); -+ LOG_DBG(" .. OUT\n"); -+ return; -+} -+ -+/** -+ * Forces VC to flush(drop) its filled playback buffers and -+ * return them the us. (VC->ARM) -+ */ -+void bcm2835_audio_flush_playback_buffers(bcm2835_alsa_stream_t * alsa_stream) -+{ -+ LOG_DBG(" .. IN\n"); -+ LOG_DBG(" .. OUT\n"); -+} -+ -+uint32_t bcm2835_audio_retrieve_buffers(bcm2835_alsa_stream_t * alsa_stream) -+{ -+ uint32_t count = atomic_read(&alsa_stream->retrieved); -+ atomic_sub(count, &alsa_stream->retrieved); -+ return count; -+} -+ -+module_param(force_bulk, bool, 0444); -+MODULE_PARM_DESC(force_bulk, "Force use of vchiq bulk for audio"); ---- /dev/null -+++ b/sound/arm/bcm2835.c -@@ -0,0 +1,511 @@ -+/***************************************************************************** -+* Copyright 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "bcm2835.h" -+ -+/* module parameters (see "Module Parameters") */ -+/* SNDRV_CARDS: maximum number of cards supported by this module */ -+static int index[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = -1 }; -+static char *id[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = NULL }; -+static int enable[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = 1 }; -+ -+/* HACKY global pointers needed for successive probes to work : ssp -+ * But compared against the changes we will have to do in VC audio_ipc code -+ * to export 8 audio_ipc devices as a single IPC device and then monitor all -+ * four devices in a thread, this gets things done quickly and should be easier -+ * to debug if we run into issues -+ */ -+ -+static struct snd_card *g_card = NULL; -+static bcm2835_chip_t *g_chip = NULL; -+ -+static int snd_bcm2835_free(bcm2835_chip_t * chip) -+{ -+ kfree(chip); -+ return 0; -+} -+ -+/* component-destructor -+ * (see "Management of Cards and Components") -+ */ -+static int snd_bcm2835_dev_free(struct snd_device *device) -+{ -+ return snd_bcm2835_free(device->device_data); -+} -+ -+/* chip-specific constructor -+ * (see "Management of Cards and Components") -+ */ -+static int snd_bcm2835_create(struct snd_card *card, -+ struct platform_device *pdev, -+ bcm2835_chip_t ** rchip) -+{ -+ bcm2835_chip_t *chip; -+ int err; -+ static struct snd_device_ops ops = { -+ .dev_free = snd_bcm2835_dev_free, -+ }; -+ -+ *rchip = NULL; -+ -+ chip = kzalloc(sizeof(*chip), GFP_KERNEL); -+ if (chip == NULL) -+ return -ENOMEM; -+ -+ chip->card = card; -+ -+ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); -+ if (err < 0) { -+ snd_bcm2835_free(chip); -+ return err; -+ } -+ -+ *rchip = chip; -+ return 0; -+} -+ -+static int snd_bcm2835_alsa_probe_dt(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ bcm2835_chip_t *chip; -+ struct snd_card *card; -+ u32 numchans; -+ int err, i; -+ -+ err = of_property_read_u32(dev->of_node, "brcm,pwm-channels", -+ &numchans); -+ if (err) { -+ dev_err(dev, "Failed to get DT property 'brcm,pwm-channels'"); -+ return err; -+ } -+ -+ if (numchans == 0 || numchans > MAX_SUBSTREAMS) { -+ numchans = MAX_SUBSTREAMS; -+ dev_warn(dev, "Illegal 'brcm,pwm-channels' value, will use %u\n", -+ numchans); -+ } -+ -+ err = snd_card_new(&pdev->dev, -1, NULL, THIS_MODULE, 0, &card); -+ if (err) { -+ dev_err(dev, "Failed to create soundcard structure\n"); -+ return err; -+ } -+ -+ snd_card_set_dev(card, dev); -+ strcpy(card->driver, "bcm2835"); -+ strcpy(card->shortname, "bcm2835 ALSA"); -+ sprintf(card->longname, "%s", card->shortname); -+ -+ err = snd_bcm2835_create(card, pdev, &chip); -+ if (err < 0) { -+ dev_err(dev, "Failed to create bcm2835 chip\n"); -+ goto err_free; -+ } -+ -+ err = snd_bcm2835_new_pcm(chip); -+ if (err < 0) { -+ dev_err(dev, "Failed to create new bcm2835 pcm device\n"); -+ goto err_free; -+ } -+ -+ err = snd_bcm2835_new_spdif_pcm(chip); -+ if (err < 0) { -+ dev_err(dev, "Failed to create new bcm2835 spdif pcm device\n"); -+ goto err_free; -+ } -+ -+ err = snd_bcm2835_new_ctl(chip); -+ if (err < 0) { -+ dev_err(dev, "Failed to create new bcm2835 ctl\n"); -+ goto err_free; -+ } -+ -+ for (i = 0; i < numchans; i++) { -+ chip->avail_substreams |= (1 << i); -+ chip->pdev[i] = pdev; -+ } -+ -+ err = snd_card_register(card); -+ if (err) { -+ dev_err(dev, "Failed to register bcm2835 ALSA card \n"); -+ goto err_free; -+ } -+ -+ g_card = card; -+ g_chip = chip; -+ platform_set_drvdata(pdev, card); -+ audio_info("bcm2835 ALSA card created with %u channels\n", numchans); -+ -+ return 0; -+ -+err_free: -+ snd_card_free(card); -+ -+ return err; -+} -+ -+static int snd_bcm2835_alsa_probe(struct platform_device *pdev) -+{ -+ static int dev; -+ bcm2835_chip_t *chip; -+ struct snd_card *card; -+ int err; -+ -+ if (pdev->dev.of_node) -+ return snd_bcm2835_alsa_probe_dt(pdev); -+ -+ if (dev >= MAX_SUBSTREAMS) -+ return -ENODEV; -+ -+ if (!enable[dev]) { -+ dev++; -+ return -ENOENT; -+ } -+ -+ if (dev > 0) -+ goto add_register_map; -+ -+ err = snd_card_new(&pdev->dev, index[dev], id[dev], THIS_MODULE, 0, &g_card); -+ if (err < 0) -+ goto out; -+ -+ snd_card_set_dev(g_card, &pdev->dev); -+ strcpy(g_card->driver, "bcm2835"); -+ strcpy(g_card->shortname, "bcm2835 ALSA"); -+ sprintf(g_card->longname, "%s", g_card->shortname); -+ -+ err = snd_bcm2835_create(g_card, pdev, &chip); -+ if (err < 0) { -+ dev_err(&pdev->dev, "Failed to create bcm2835 chip\n"); -+ goto out_bcm2835_create; -+ } -+ -+ g_chip = chip; -+ err = snd_bcm2835_new_pcm(chip); -+ if (err < 0) { -+ dev_err(&pdev->dev, "Failed to create new BCM2835 pcm device\n"); -+ goto out_bcm2835_new_pcm; -+ } -+ -+ err = snd_bcm2835_new_spdif_pcm(chip); -+ if (err < 0) { -+ dev_err(&pdev->dev, "Failed to create new BCM2835 spdif pcm device\n"); -+ goto out_bcm2835_new_spdif; -+ } -+ -+ err = snd_bcm2835_new_ctl(chip); -+ if (err < 0) { -+ dev_err(&pdev->dev, "Failed to create new BCM2835 ctl\n"); -+ goto out_bcm2835_new_ctl; -+ } -+ -+add_register_map: -+ card = g_card; -+ chip = g_chip; -+ -+ BUG_ON(!(card && chip)); -+ -+ chip->avail_substreams |= (1 << dev); -+ chip->pdev[dev] = pdev; -+ -+ if (dev == 0) { -+ err = snd_card_register(card); -+ if (err < 0) { -+ dev_err(&pdev->dev, -+ "Failed to register bcm2835 ALSA card \n"); -+ goto out_card_register; -+ } -+ platform_set_drvdata(pdev, card); -+ audio_info("bcm2835 ALSA card created!\n"); -+ } else { -+ audio_info("bcm2835 ALSA chip created!\n"); -+ platform_set_drvdata(pdev, (void *)dev); -+ } -+ -+ dev++; -+ -+ return 0; -+ -+out_card_register: -+out_bcm2835_new_ctl: -+out_bcm2835_new_spdif: -+out_bcm2835_new_pcm: -+out_bcm2835_create: -+ BUG_ON(!g_card); -+ if (snd_card_free(g_card)) -+ dev_err(&pdev->dev, "Failed to free Registered alsa card\n"); -+ g_card = NULL; -+out: -+ dev = SNDRV_CARDS; /* stop more avail_substreams from being probed */ -+ dev_err(&pdev->dev, "BCM2835 ALSA Probe failed !!\n"); -+ return err; -+} -+ -+static int snd_bcm2835_alsa_remove(struct platform_device *pdev) -+{ -+ uint32_t idx; -+ void *drv_data; -+ -+ drv_data = platform_get_drvdata(pdev); -+ -+ if (drv_data == (void *)g_card) { -+ /* This is the card device */ -+ snd_card_free((struct snd_card *)drv_data); -+ g_card = NULL; -+ g_chip = NULL; -+ } else { -+ idx = (uint32_t) drv_data; -+ if (g_card != NULL) { -+ BUG_ON(!g_chip); -+ /* We pass chip device numbers in audio ipc devices -+ * other than the one we registered our card with -+ */ -+ idx = (uint32_t) drv_data; -+ BUG_ON(!idx || idx > MAX_SUBSTREAMS); -+ g_chip->avail_substreams &= ~(1 << idx); -+ /* There should be atleast one substream registered -+ * after we are done here, as it wil be removed when -+ * the *remove* is called for the card device -+ */ -+ BUG_ON(!g_chip->avail_substreams); -+ } -+ } -+ -+ platform_set_drvdata(pdev, NULL); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+static int snd_bcm2835_alsa_suspend(struct platform_device *pdev, -+ pm_message_t state) -+{ -+ return 0; -+} -+ -+static int snd_bcm2835_alsa_resume(struct platform_device *pdev) -+{ -+ return 0; -+} -+ -+#endif -+ -+static const struct of_device_id snd_bcm2835_of_match_table[] = { -+ { .compatible = "brcm,bcm2835-audio", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table); -+ -+static struct platform_driver bcm2835_alsa0_driver = { -+ .probe = snd_bcm2835_alsa_probe, -+ .remove = snd_bcm2835_alsa_remove, -+#ifdef CONFIG_PM -+ .suspend = snd_bcm2835_alsa_suspend, -+ .resume = snd_bcm2835_alsa_resume, -+#endif -+ .driver = { -+ .name = "bcm2835_AUD0", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_bcm2835_of_match_table, -+ }, -+}; -+ -+static struct platform_driver bcm2835_alsa1_driver = { -+ .probe = snd_bcm2835_alsa_probe, -+ .remove = snd_bcm2835_alsa_remove, -+#ifdef CONFIG_PM -+ .suspend = snd_bcm2835_alsa_suspend, -+ .resume = snd_bcm2835_alsa_resume, -+#endif -+ .driver = { -+ .name = "bcm2835_AUD1", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static struct platform_driver bcm2835_alsa2_driver = { -+ .probe = snd_bcm2835_alsa_probe, -+ .remove = snd_bcm2835_alsa_remove, -+#ifdef CONFIG_PM -+ .suspend = snd_bcm2835_alsa_suspend, -+ .resume = snd_bcm2835_alsa_resume, -+#endif -+ .driver = { -+ .name = "bcm2835_AUD2", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static struct platform_driver bcm2835_alsa3_driver = { -+ .probe = snd_bcm2835_alsa_probe, -+ .remove = snd_bcm2835_alsa_remove, -+#ifdef CONFIG_PM -+ .suspend = snd_bcm2835_alsa_suspend, -+ .resume = snd_bcm2835_alsa_resume, -+#endif -+ .driver = { -+ .name = "bcm2835_AUD3", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static struct platform_driver bcm2835_alsa4_driver = { -+ .probe = snd_bcm2835_alsa_probe, -+ .remove = snd_bcm2835_alsa_remove, -+#ifdef CONFIG_PM -+ .suspend = snd_bcm2835_alsa_suspend, -+ .resume = snd_bcm2835_alsa_resume, -+#endif -+ .driver = { -+ .name = "bcm2835_AUD4", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static struct platform_driver bcm2835_alsa5_driver = { -+ .probe = snd_bcm2835_alsa_probe, -+ .remove = snd_bcm2835_alsa_remove, -+#ifdef CONFIG_PM -+ .suspend = snd_bcm2835_alsa_suspend, -+ .resume = snd_bcm2835_alsa_resume, -+#endif -+ .driver = { -+ .name = "bcm2835_AUD5", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static struct platform_driver bcm2835_alsa6_driver = { -+ .probe = snd_bcm2835_alsa_probe, -+ .remove = snd_bcm2835_alsa_remove, -+#ifdef CONFIG_PM -+ .suspend = snd_bcm2835_alsa_suspend, -+ .resume = snd_bcm2835_alsa_resume, -+#endif -+ .driver = { -+ .name = "bcm2835_AUD6", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static struct platform_driver bcm2835_alsa7_driver = { -+ .probe = snd_bcm2835_alsa_probe, -+ .remove = snd_bcm2835_alsa_remove, -+#ifdef CONFIG_PM -+ .suspend = snd_bcm2835_alsa_suspend, -+ .resume = snd_bcm2835_alsa_resume, -+#endif -+ .driver = { -+ .name = "bcm2835_AUD7", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int bcm2835_alsa_device_init(void) -+{ -+ int err; -+ err = platform_driver_register(&bcm2835_alsa0_driver); -+ if (err) { -+ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); -+ goto out; -+ } -+ -+ err = platform_driver_register(&bcm2835_alsa1_driver); -+ if (err) { -+ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); -+ goto unregister_0; -+ } -+ -+ err = platform_driver_register(&bcm2835_alsa2_driver); -+ if (err) { -+ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); -+ goto unregister_1; -+ } -+ -+ err = platform_driver_register(&bcm2835_alsa3_driver); -+ if (err) { -+ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); -+ goto unregister_2; -+ } -+ -+ err = platform_driver_register(&bcm2835_alsa4_driver); -+ if (err) { -+ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); -+ goto unregister_3; -+ } -+ -+ err = platform_driver_register(&bcm2835_alsa5_driver); -+ if (err) { -+ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); -+ goto unregister_4; -+ } -+ -+ err = platform_driver_register(&bcm2835_alsa6_driver); -+ if (err) { -+ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); -+ goto unregister_5; -+ } -+ -+ err = platform_driver_register(&bcm2835_alsa7_driver); -+ if (err) { -+ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); -+ goto unregister_6; -+ } -+ -+ return 0; -+ -+unregister_6: -+ platform_driver_unregister(&bcm2835_alsa6_driver); -+unregister_5: -+ platform_driver_unregister(&bcm2835_alsa5_driver); -+unregister_4: -+ platform_driver_unregister(&bcm2835_alsa4_driver); -+unregister_3: -+ platform_driver_unregister(&bcm2835_alsa3_driver); -+unregister_2: -+ platform_driver_unregister(&bcm2835_alsa2_driver); -+unregister_1: -+ platform_driver_unregister(&bcm2835_alsa1_driver); -+unregister_0: -+ platform_driver_unregister(&bcm2835_alsa0_driver); -+out: -+ return err; -+} -+ -+static void bcm2835_alsa_device_exit(void) -+{ -+ platform_driver_unregister(&bcm2835_alsa0_driver); -+ platform_driver_unregister(&bcm2835_alsa1_driver); -+ platform_driver_unregister(&bcm2835_alsa2_driver); -+ platform_driver_unregister(&bcm2835_alsa3_driver); -+ platform_driver_unregister(&bcm2835_alsa4_driver); -+ platform_driver_unregister(&bcm2835_alsa5_driver); -+ platform_driver_unregister(&bcm2835_alsa6_driver); -+ platform_driver_unregister(&bcm2835_alsa7_driver); -+} -+ -+late_initcall(bcm2835_alsa_device_init); -+module_exit(bcm2835_alsa_device_exit); -+ -+MODULE_AUTHOR("Dom Cobley"); -+MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:bcm2835_alsa"); ---- /dev/null -+++ b/sound/arm/bcm2835.h -@@ -0,0 +1,167 @@ -+/***************************************************************************** -+* Copyright 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#ifndef __SOUND_ARM_BCM2835_H -+#define __SOUND_ARM_BCM2835_H -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* -+#define AUDIO_DEBUG_ENABLE -+#define AUDIO_VERBOSE_DEBUG_ENABLE -+*/ -+ -+/* Debug macros */ -+ -+#ifdef AUDIO_DEBUG_ENABLE -+#ifdef AUDIO_VERBOSE_DEBUG_ENABLE -+ -+#define audio_debug(fmt, arg...) \ -+ printk(KERN_INFO"%s:%d " fmt, __func__, __LINE__, ##arg) -+ -+#define audio_info(fmt, arg...) \ -+ printk(KERN_INFO"%s:%d " fmt, __func__, __LINE__, ##arg) -+ -+#else -+ -+#define audio_debug(fmt, arg...) -+ -+#define audio_info(fmt, arg...) -+ -+#endif /* AUDIO_VERBOSE_DEBUG_ENABLE */ -+ -+#else -+ -+#define audio_debug(fmt, arg...) -+ -+#define audio_info(fmt, arg...) -+ -+#endif /* AUDIO_DEBUG_ENABLE */ -+ -+#define audio_error(fmt, arg...) \ -+ printk(KERN_ERR"%s:%d " fmt, __func__, __LINE__, ##arg) -+ -+#define audio_warning(fmt, arg...) \ -+ printk(KERN_WARNING"%s:%d " fmt, __func__, __LINE__, ##arg) -+ -+#define audio_alert(fmt, arg...) \ -+ printk(KERN_ALERT"%s:%d " fmt, __func__, __LINE__, ##arg) -+ -+#define MAX_SUBSTREAMS (8) -+#define AVAIL_SUBSTREAMS_MASK (0xff) -+enum { -+ CTRL_VOL_MUTE, -+ CTRL_VOL_UNMUTE -+}; -+ -+/* macros for alsa2chip and chip2alsa, instead of functions */ -+ -+#define alsa2chip(vol) (uint)(-((vol << 8) / 100)) /* convert alsa to chip volume (defined as macro rather than function call) */ -+#define chip2alsa(vol) -((vol * 100) >> 8) /* convert chip to alsa volume */ -+ -+/* Some constants for values .. */ -+typedef enum { -+ AUDIO_DEST_AUTO = 0, -+ AUDIO_DEST_HEADPHONES = 1, -+ AUDIO_DEST_HDMI = 2, -+ AUDIO_DEST_MAX, -+} SND_BCM2835_ROUTE_T; -+ -+typedef enum { -+ PCM_PLAYBACK_VOLUME, -+ PCM_PLAYBACK_MUTE, -+ PCM_PLAYBACK_DEVICE, -+} SND_BCM2835_CTRL_T; -+ -+/* definition of the chip-specific record */ -+typedef struct bcm2835_chip { -+ struct snd_card *card; -+ struct snd_pcm *pcm; -+ struct snd_pcm *pcm_spdif; -+ /* Bitmat for valid reg_base and irq numbers */ -+ uint32_t avail_substreams; -+ struct platform_device *pdev[MAX_SUBSTREAMS]; -+ struct bcm2835_alsa_stream *alsa_stream[MAX_SUBSTREAMS]; -+ -+ int volume; -+ int old_volume; /* stores the volume value whist muted */ -+ int dest; -+ int mute; -+ -+ unsigned int opened; -+ unsigned int spdif_status; -+ struct mutex audio_mutex; -+} bcm2835_chip_t; -+ -+typedef struct bcm2835_alsa_stream { -+ bcm2835_chip_t *chip; -+ struct snd_pcm_substream *substream; -+ struct snd_pcm_indirect pcm_indirect; -+ -+ struct semaphore buffers_update_sem; -+ struct semaphore control_sem; -+ spinlock_t lock; -+ volatile uint32_t control; -+ volatile uint32_t status; -+ -+ int open; -+ int running; -+ int draining; -+ -+ int channels; -+ int params_rate; -+ int pcm_format_width; -+ -+ unsigned int pos; -+ unsigned int buffer_size; -+ unsigned int period_size; -+ -+ uint32_t enable_fifo_irq; -+ irq_handler_t fifo_irq_handler; -+ -+ atomic_t retrieved; -+ struct opaque_AUDIO_INSTANCE_T *instance; -+ struct workqueue_struct *my_wq; -+ int idx; -+} bcm2835_alsa_stream_t; -+ -+int snd_bcm2835_new_ctl(bcm2835_chip_t * chip); -+int snd_bcm2835_new_pcm(bcm2835_chip_t * chip); -+int snd_bcm2835_new_spdif_pcm(bcm2835_chip_t * chip); -+ -+int bcm2835_audio_open(bcm2835_alsa_stream_t * alsa_stream); -+int bcm2835_audio_close(bcm2835_alsa_stream_t * alsa_stream); -+int bcm2835_audio_set_params(bcm2835_alsa_stream_t * alsa_stream, -+ uint32_t channels, uint32_t samplerate, -+ uint32_t bps); -+int bcm2835_audio_setup(bcm2835_alsa_stream_t * alsa_stream); -+int bcm2835_audio_start(bcm2835_alsa_stream_t * alsa_stream); -+int bcm2835_audio_stop(bcm2835_alsa_stream_t * alsa_stream); -+int bcm2835_audio_set_ctls(bcm2835_chip_t * chip); -+int bcm2835_audio_write(bcm2835_alsa_stream_t * alsa_stream, uint32_t count, -+ void *src); -+uint32_t bcm2835_audio_retrieve_buffers(bcm2835_alsa_stream_t * alsa_stream); -+void bcm2835_audio_flush_buffers(bcm2835_alsa_stream_t * alsa_stream); -+void bcm2835_audio_flush_playback_buffers(bcm2835_alsa_stream_t * alsa_stream); -+ -+#endif /* __SOUND_ARM_BCM2835_H */ ---- /dev/null -+++ b/sound/arm/vc_vchi_audioserv_defs.h -@@ -0,0 +1,116 @@ -+/***************************************************************************** -+* Copyright 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#ifndef _VC_AUDIO_DEFS_H_ -+#define _VC_AUDIO_DEFS_H_ -+ -+#define VC_AUDIOSERV_MIN_VER 1 -+#define VC_AUDIOSERV_VER 2 -+ -+// FourCC code used for VCHI connection -+#define VC_AUDIO_SERVER_NAME MAKE_FOURCC("AUDS") -+ -+// Maximum message length -+#define VC_AUDIO_MAX_MSG_LEN (sizeof( VC_AUDIO_MSG_T )) -+ -+// List of screens that are currently supported -+// All message types supported for HOST->VC direction -+typedef enum { -+ VC_AUDIO_MSG_TYPE_RESULT, // Generic result -+ VC_AUDIO_MSG_TYPE_COMPLETE, // Generic result -+ VC_AUDIO_MSG_TYPE_CONFIG, // Configure audio -+ VC_AUDIO_MSG_TYPE_CONTROL, // Configure audio -+ VC_AUDIO_MSG_TYPE_OPEN, // Configure audio -+ VC_AUDIO_MSG_TYPE_CLOSE, // Configure audio -+ VC_AUDIO_MSG_TYPE_START, // Configure audio -+ VC_AUDIO_MSG_TYPE_STOP, // Configure audio -+ VC_AUDIO_MSG_TYPE_WRITE, // Configure audio -+ VC_AUDIO_MSG_TYPE_MAX -+} VC_AUDIO_MSG_TYPE; -+ -+// configure the audio -+typedef struct { -+ uint32_t channels; -+ uint32_t samplerate; -+ uint32_t bps; -+ -+} VC_AUDIO_CONFIG_T; -+ -+typedef struct { -+ uint32_t volume; -+ uint32_t dest; -+ -+} VC_AUDIO_CONTROL_T; -+ -+// audio -+typedef struct { -+ uint32_t dummy; -+ -+} VC_AUDIO_OPEN_T; -+ -+// audio -+typedef struct { -+ uint32_t dummy; -+ -+} VC_AUDIO_CLOSE_T; -+// audio -+typedef struct { -+ uint32_t dummy; -+ -+} VC_AUDIO_START_T; -+// audio -+typedef struct { -+ uint32_t draining; -+ -+} VC_AUDIO_STOP_T; -+ -+// configure the write audio samples -+typedef struct { -+ uint32_t count; // in bytes -+ void *callback; -+ void *cookie; -+ uint16_t silence; -+ uint16_t max_packet; -+} VC_AUDIO_WRITE_T; -+ -+// Generic result for a request (VC->HOST) -+typedef struct { -+ int32_t success; // Success value -+ -+} VC_AUDIO_RESULT_T; -+ -+// Generic result for a request (VC->HOST) -+typedef struct { -+ int32_t count; // Success value -+ void *callback; -+ void *cookie; -+} VC_AUDIO_COMPLETE_T; -+ -+// Message header for all messages in HOST->VC direction -+typedef struct { -+ int32_t type; // Message type (VC_AUDIO_MSG_TYPE) -+ union { -+ VC_AUDIO_CONFIG_T config; -+ VC_AUDIO_CONTROL_T control; -+ VC_AUDIO_OPEN_T open; -+ VC_AUDIO_CLOSE_T close; -+ VC_AUDIO_START_T start; -+ VC_AUDIO_STOP_T stop; -+ VC_AUDIO_WRITE_T write; -+ VC_AUDIO_RESULT_T result; -+ VC_AUDIO_COMPLETE_T complete; -+ } u; -+} VC_AUDIO_MSG_T; -+ -+#endif // _VC_AUDIO_DEFS_H_ diff --git a/target/linux/brcm2708/patches-4.9/0039-vc_mem-Add-vc_mem-driver-for-querying-firmware-memor.patch b/target/linux/brcm2708/patches-4.9/0039-vc_mem-Add-vc_mem-driver-for-querying-firmware-memor.patch deleted file mode 100644 index 6a22bdf97025..000000000000 --- a/target/linux/brcm2708/patches-4.9/0039-vc_mem-Add-vc_mem-driver-for-querying-firmware-memor.patch +++ /dev/null @@ -1,516 +0,0 @@ -From 94c0e75bc85ad2a034c501b6d3640b880b9c3bb7 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Fri, 28 Oct 2016 15:36:43 +0100 -Subject: [PATCH] vc_mem: Add vc_mem driver for querying firmware memory - addresses -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: popcornmix - -BCM270x: Move vc_mem - -Make the vc_mem module available for ARCH_BCM2835 by moving it. - -Signed-off-by: Noralf Trønnes ---- - drivers/char/broadcom/Kconfig | 12 +- - drivers/char/broadcom/Makefile | 1 + - drivers/char/broadcom/vc_mem.c | 422 ++++++++++++++++++++++++++++++++++++++++ - include/linux/broadcom/vc_mem.h | 35 ++++ - 4 files changed, 469 insertions(+), 1 deletion(-) - create mode 100644 drivers/char/broadcom/vc_mem.c - create mode 100644 include/linux/broadcom/vc_mem.h - ---- a/drivers/char/broadcom/Kconfig -+++ b/drivers/char/broadcom/Kconfig -@@ -7,9 +7,19 @@ menuconfig BRCM_CHAR_DRIVERS - help - Broadcom's char drivers - -+if BRCM_CHAR_DRIVERS -+ - config BCM_VC_CMA - bool "Videocore CMA" -- depends on CMA && BRCM_CHAR_DRIVERS && BCM2708_VCHIQ -+ depends on CMA && BCM2708_VCHIQ - default n - help - Helper for videocore CMA access. -+ -+config BCM2708_VCMEM -+ bool "Videocore Memory" -+ default y -+ help -+ Helper for videocore memory access and total size allocation. -+ -+endif ---- a/drivers/char/broadcom/Makefile -+++ b/drivers/char/broadcom/Makefile -@@ -1 +1,2 @@ - obj-$(CONFIG_BCM_VC_CMA) += vc_cma/ -+obj-$(CONFIG_BCM2708_VCMEM) += vc_mem.o ---- /dev/null -+++ b/drivers/char/broadcom/vc_mem.c -@@ -0,0 +1,422 @@ -+/***************************************************************************** -+* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define DRIVER_NAME "vc-mem" -+ -+// Device (/dev) related variables -+static dev_t vc_mem_devnum = 0; -+static struct class *vc_mem_class = NULL; -+static struct cdev vc_mem_cdev; -+static int vc_mem_inited = 0; -+ -+#ifdef CONFIG_DEBUG_FS -+static struct dentry *vc_mem_debugfs_entry; -+#endif -+ -+/* -+ * Videocore memory addresses and size -+ * -+ * Drivers that wish to know the videocore memory addresses and sizes should -+ * use these variables instead of the MM_IO_BASE and MM_ADDR_IO defines in -+ * headers. This allows the other drivers to not be tied down to a a certain -+ * address/size at compile time. -+ * -+ * In the future, the goal is to have the videocore memory virtual address and -+ * size be calculated at boot time rather than at compile time. The decision of -+ * where the videocore memory resides and its size would be in the hands of the -+ * bootloader (and/or kernel). When that happens, the values of these variables -+ * would be calculated and assigned in the init function. -+ */ -+// in the 2835 VC in mapped above ARM, but ARM has full access to VC space -+unsigned long mm_vc_mem_phys_addr = 0x00000000; -+unsigned int mm_vc_mem_size = 0; -+unsigned int mm_vc_mem_base = 0; -+ -+EXPORT_SYMBOL(mm_vc_mem_phys_addr); -+EXPORT_SYMBOL(mm_vc_mem_size); -+EXPORT_SYMBOL(mm_vc_mem_base); -+ -+static uint phys_addr = 0; -+static uint mem_size = 0; -+static uint mem_base = 0; -+ -+ -+/**************************************************************************** -+* -+* vc_mem_open -+* -+***************************************************************************/ -+ -+static int -+vc_mem_open(struct inode *inode, struct file *file) -+{ -+ (void) inode; -+ (void) file; -+ -+ pr_debug("%s: called file = 0x%p\n", __func__, file); -+ -+ return 0; -+} -+ -+/**************************************************************************** -+* -+* vc_mem_release -+* -+***************************************************************************/ -+ -+static int -+vc_mem_release(struct inode *inode, struct file *file) -+{ -+ (void) inode; -+ (void) file; -+ -+ pr_debug("%s: called file = 0x%p\n", __func__, file); -+ -+ return 0; -+} -+ -+/**************************************************************************** -+* -+* vc_mem_get_size -+* -+***************************************************************************/ -+ -+static void -+vc_mem_get_size(void) -+{ -+} -+ -+/**************************************************************************** -+* -+* vc_mem_get_base -+* -+***************************************************************************/ -+ -+static void -+vc_mem_get_base(void) -+{ -+} -+ -+/**************************************************************************** -+* -+* vc_mem_get_current_size -+* -+***************************************************************************/ -+ -+int -+vc_mem_get_current_size(void) -+{ -+ return mm_vc_mem_size; -+} -+ -+EXPORT_SYMBOL_GPL(vc_mem_get_current_size); -+ -+/**************************************************************************** -+* -+* vc_mem_ioctl -+* -+***************************************************************************/ -+ -+static long -+vc_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ int rc = 0; -+ -+ (void) cmd; -+ (void) arg; -+ -+ pr_debug("%s: called file = 0x%p\n", __func__, file); -+ -+ switch (cmd) { -+ case VC_MEM_IOC_MEM_PHYS_ADDR: -+ { -+ pr_debug("%s: VC_MEM_IOC_MEM_PHYS_ADDR=0x%p\n", -+ __func__, (void *) mm_vc_mem_phys_addr); -+ -+ if (copy_to_user((void *) arg, &mm_vc_mem_phys_addr, -+ sizeof (mm_vc_mem_phys_addr)) != 0) { -+ rc = -EFAULT; -+ } -+ break; -+ } -+ case VC_MEM_IOC_MEM_SIZE: -+ { -+ // Get the videocore memory size first -+ vc_mem_get_size(); -+ -+ pr_debug("%s: VC_MEM_IOC_MEM_SIZE=%u\n", __func__, -+ mm_vc_mem_size); -+ -+ if (copy_to_user((void *) arg, &mm_vc_mem_size, -+ sizeof (mm_vc_mem_size)) != 0) { -+ rc = -EFAULT; -+ } -+ break; -+ } -+ case VC_MEM_IOC_MEM_BASE: -+ { -+ // Get the videocore memory base -+ vc_mem_get_base(); -+ -+ pr_debug("%s: VC_MEM_IOC_MEM_BASE=%u\n", __func__, -+ mm_vc_mem_base); -+ -+ if (copy_to_user((void *) arg, &mm_vc_mem_base, -+ sizeof (mm_vc_mem_base)) != 0) { -+ rc = -EFAULT; -+ } -+ break; -+ } -+ case VC_MEM_IOC_MEM_LOAD: -+ { -+ // Get the videocore memory base -+ vc_mem_get_base(); -+ -+ pr_debug("%s: VC_MEM_IOC_MEM_LOAD=%u\n", __func__, -+ mm_vc_mem_base); -+ -+ if (copy_to_user((void *) arg, &mm_vc_mem_base, -+ sizeof (mm_vc_mem_base)) != 0) { -+ rc = -EFAULT; -+ } -+ break; -+ } -+ default: -+ { -+ return -ENOTTY; -+ } -+ } -+ pr_debug("%s: file = 0x%p returning %d\n", __func__, file, rc); -+ -+ return rc; -+} -+ -+/**************************************************************************** -+* -+* vc_mem_mmap -+* -+***************************************************************************/ -+ -+static int -+vc_mem_mmap(struct file *filp, struct vm_area_struct *vma) -+{ -+ int rc = 0; -+ unsigned long length = vma->vm_end - vma->vm_start; -+ unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; -+ -+ pr_debug("%s: vm_start = 0x%08lx vm_end = 0x%08lx vm_pgoff = 0x%08lx\n", -+ __func__, (long) vma->vm_start, (long) vma->vm_end, -+ (long) vma->vm_pgoff); -+ -+ if (offset + length > mm_vc_mem_size) { -+ pr_err("%s: length %ld is too big\n", __func__, length); -+ return -EINVAL; -+ } -+ // Do not cache the memory map -+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); -+ -+ rc = remap_pfn_range(vma, vma->vm_start, -+ (mm_vc_mem_phys_addr >> PAGE_SHIFT) + -+ vma->vm_pgoff, length, vma->vm_page_prot); -+ if (rc != 0) { -+ pr_err("%s: remap_pfn_range failed (rc=%d)\n", __func__, rc); -+ } -+ -+ return rc; -+} -+ -+/**************************************************************************** -+* -+* File Operations for the driver. -+* -+***************************************************************************/ -+ -+static const struct file_operations vc_mem_fops = { -+ .owner = THIS_MODULE, -+ .open = vc_mem_open, -+ .release = vc_mem_release, -+ .unlocked_ioctl = vc_mem_ioctl, -+ .mmap = vc_mem_mmap, -+}; -+ -+#ifdef CONFIG_DEBUG_FS -+static void vc_mem_debugfs_deinit(void) -+{ -+ debugfs_remove_recursive(vc_mem_debugfs_entry); -+ vc_mem_debugfs_entry = NULL; -+} -+ -+ -+static int vc_mem_debugfs_init( -+ struct device *dev) -+{ -+ vc_mem_debugfs_entry = debugfs_create_dir(DRIVER_NAME, NULL); -+ if (!vc_mem_debugfs_entry) { -+ dev_warn(dev, "could not create debugfs entry\n"); -+ return -EFAULT; -+ } -+ -+ if (!debugfs_create_x32("vc_mem_phys_addr", -+ 0444, -+ vc_mem_debugfs_entry, -+ (u32 *)&mm_vc_mem_phys_addr)) { -+ dev_warn(dev, "%s:could not create vc_mem_phys entry\n", -+ __func__); -+ goto fail; -+ } -+ -+ if (!debugfs_create_x32("vc_mem_size", -+ 0444, -+ vc_mem_debugfs_entry, -+ (u32 *)&mm_vc_mem_size)) { -+ dev_warn(dev, "%s:could not create vc_mem_size entry\n", -+ __func__); -+ goto fail; -+ } -+ -+ if (!debugfs_create_x32("vc_mem_base", -+ 0444, -+ vc_mem_debugfs_entry, -+ (u32 *)&mm_vc_mem_base)) { -+ dev_warn(dev, "%s:could not create vc_mem_base entry\n", -+ __func__); -+ goto fail; -+ } -+ -+ return 0; -+ -+fail: -+ vc_mem_debugfs_deinit(); -+ return -EFAULT; -+} -+ -+#endif /* CONFIG_DEBUG_FS */ -+ -+ -+/**************************************************************************** -+* -+* vc_mem_init -+* -+***************************************************************************/ -+ -+static int __init -+vc_mem_init(void) -+{ -+ int rc = -EFAULT; -+ struct device *dev; -+ -+ pr_debug("%s: called\n", __func__); -+ -+ mm_vc_mem_phys_addr = phys_addr; -+ mm_vc_mem_size = mem_size; -+ mm_vc_mem_base = mem_base; -+ -+ vc_mem_get_size(); -+ -+ pr_info("vc-mem: phys_addr:0x%08lx mem_base=0x%08x mem_size:0x%08x(%u MiB)\n", -+ mm_vc_mem_phys_addr, mm_vc_mem_base, mm_vc_mem_size, mm_vc_mem_size / (1024 * 1024)); -+ -+ if ((rc = alloc_chrdev_region(&vc_mem_devnum, 0, 1, DRIVER_NAME)) < 0) { -+ pr_err("%s: alloc_chrdev_region failed (rc=%d)\n", -+ __func__, rc); -+ goto out_err; -+ } -+ -+ cdev_init(&vc_mem_cdev, &vc_mem_fops); -+ if ((rc = cdev_add(&vc_mem_cdev, vc_mem_devnum, 1)) != 0) { -+ pr_err("%s: cdev_add failed (rc=%d)\n", __func__, rc); -+ goto out_unregister; -+ } -+ -+ vc_mem_class = class_create(THIS_MODULE, DRIVER_NAME); -+ if (IS_ERR(vc_mem_class)) { -+ rc = PTR_ERR(vc_mem_class); -+ pr_err("%s: class_create failed (rc=%d)\n", __func__, rc); -+ goto out_cdev_del; -+ } -+ -+ dev = device_create(vc_mem_class, NULL, vc_mem_devnum, NULL, -+ DRIVER_NAME); -+ if (IS_ERR(dev)) { -+ rc = PTR_ERR(dev); -+ pr_err("%s: device_create failed (rc=%d)\n", __func__, rc); -+ goto out_class_destroy; -+ } -+ -+#ifdef CONFIG_DEBUG_FS -+ /* don't fail if the debug entries cannot be created */ -+ vc_mem_debugfs_init(dev); -+#endif -+ -+ vc_mem_inited = 1; -+ return 0; -+ -+ device_destroy(vc_mem_class, vc_mem_devnum); -+ -+ out_class_destroy: -+ class_destroy(vc_mem_class); -+ vc_mem_class = NULL; -+ -+ out_cdev_del: -+ cdev_del(&vc_mem_cdev); -+ -+ out_unregister: -+ unregister_chrdev_region(vc_mem_devnum, 1); -+ -+ out_err: -+ return -1; -+} -+ -+/**************************************************************************** -+* -+* vc_mem_exit -+* -+***************************************************************************/ -+ -+static void __exit -+vc_mem_exit(void) -+{ -+ pr_debug("%s: called\n", __func__); -+ -+ if (vc_mem_inited) { -+#if CONFIG_DEBUG_FS -+ vc_mem_debugfs_deinit(); -+#endif -+ device_destroy(vc_mem_class, vc_mem_devnum); -+ class_destroy(vc_mem_class); -+ cdev_del(&vc_mem_cdev); -+ unregister_chrdev_region(vc_mem_devnum, 1); -+ } -+} -+ -+module_init(vc_mem_init); -+module_exit(vc_mem_exit); -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Broadcom Corporation"); -+ -+module_param(phys_addr, uint, 0644); -+module_param(mem_size, uint, 0644); -+module_param(mem_base, uint, 0644); ---- /dev/null -+++ b/include/linux/broadcom/vc_mem.h -@@ -0,0 +1,35 @@ -+/***************************************************************************** -+* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#ifndef _VC_MEM_H -+#define _VC_MEM_H -+ -+#include -+ -+#define VC_MEM_IOC_MAGIC 'v' -+ -+#define VC_MEM_IOC_MEM_PHYS_ADDR _IOR( VC_MEM_IOC_MAGIC, 0, unsigned long ) -+#define VC_MEM_IOC_MEM_SIZE _IOR( VC_MEM_IOC_MAGIC, 1, unsigned int ) -+#define VC_MEM_IOC_MEM_BASE _IOR( VC_MEM_IOC_MAGIC, 2, unsigned int ) -+#define VC_MEM_IOC_MEM_LOAD _IOR( VC_MEM_IOC_MAGIC, 3, unsigned int ) -+ -+#if defined( __KERNEL__ ) -+#define VC_MEM_TO_ARM_ADDR_MASK 0x3FFFFFFF -+ -+extern unsigned long mm_vc_mem_phys_addr; -+extern unsigned int mm_vc_mem_size; -+extern int vc_mem_get_current_size( void ); -+#endif -+ -+#endif /* _VC_MEM_H */ diff --git a/target/linux/brcm2708/patches-4.9/0040-vcsm-VideoCore-shared-memory-service-for-BCM2835.patch b/target/linux/brcm2708/patches-4.9/0040-vcsm-VideoCore-shared-memory-service-for-BCM2835.patch deleted file mode 100644 index ff1cfad30a45..000000000000 --- a/target/linux/brcm2708/patches-4.9/0040-vcsm-VideoCore-shared-memory-service-for-BCM2835.patch +++ /dev/null @@ -1,4384 +0,0 @@ -From b62c07606f1673e2e0b9e70ce89e48fc240a7ee1 Mon Sep 17 00:00:00 2001 -From: Tim Gover -Date: Tue, 22 Jul 2014 15:41:04 +0100 -Subject: [PATCH] vcsm: VideoCore shared memory service for BCM2835 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add experimental support for the VideoCore shared memory service. -This allows user processes to allocate memory from VideoCore's -GPU relocatable heap and mmap the buffers. Additionally, the memory -handles can passed to other VideoCore services such as MMAL, OpenMax -and DispmanX - -TODO -* This driver was originally released for BCM28155 which has a different - cache architecture to BCM2835. Consequently, in this release only - uncached mappings are supported. However, there's no fundamental - reason which cached mappings cannot be support or BCM2835 -* More refactoring is required to remove the typedefs. -* Re-enable the some of the commented out debug-fs statistics which were - disabled when migrating code from proc-fs. -* There's a lot of code to support sharing of VCSM in order to support - Android. This could probably done more cleanly or perhaps just - removed. - -Signed-off-by: Tim Gover - -config: Disable VC_SM for now to fix hang with cutdown kernel - -vcsm: Use boolean as it cannot be built as module - -On building the bcm_vc_sm as a module we get the following error: - -v7_dma_flush_range and do_munmap are undefined in vc-sm.ko. - -Fix by making it not an option to build as module - -vcsm: Add ioctl for custom cache flushing - -vc-sm: Move headers out of arch directory - -Signed-off-by: Noralf Trønnes ---- - drivers/char/broadcom/Kconfig | 9 + - drivers/char/broadcom/Makefile | 1 + - drivers/char/broadcom/vc_sm/Makefile | 9 + - drivers/char/broadcom/vc_sm/vc_sm_defs.h | 181 ++ - drivers/char/broadcom/vc_sm/vc_sm_knl.h | 55 + - drivers/char/broadcom/vc_sm/vc_vchi_sm.c | 492 +++++ - drivers/char/broadcom/vc_sm/vc_vchi_sm.h | 82 + - drivers/char/broadcom/vc_sm/vmcs_sm.c | 3213 ++++++++++++++++++++++++++++++ - include/linux/broadcom/vmcs_sm_ioctl.h | 248 +++ - 9 files changed, 4290 insertions(+) - create mode 100644 drivers/char/broadcom/vc_sm/Makefile - create mode 100644 drivers/char/broadcom/vc_sm/vc_sm_defs.h - create mode 100644 drivers/char/broadcom/vc_sm/vc_sm_knl.h - create mode 100644 drivers/char/broadcom/vc_sm/vc_vchi_sm.c - create mode 100644 drivers/char/broadcom/vc_sm/vc_vchi_sm.h - create mode 100644 drivers/char/broadcom/vc_sm/vmcs_sm.c - create mode 100644 include/linux/broadcom/vmcs_sm_ioctl.h - ---- a/drivers/char/broadcom/Kconfig -+++ b/drivers/char/broadcom/Kconfig -@@ -23,3 +23,12 @@ config BCM2708_VCMEM - Helper for videocore memory access and total size allocation. - - endif -+ -+config BCM_VC_SM -+ bool "VMCS Shared Memory" -+ depends on BCM2708_VCHIQ -+ select BCM2708_VCMEM -+ default n -+ help -+ Support for the VC shared memory on the Broadcom reference -+ design. Uses the VCHIQ stack. ---- a/drivers/char/broadcom/Makefile -+++ b/drivers/char/broadcom/Makefile -@@ -1,2 +1,3 @@ - obj-$(CONFIG_BCM_VC_CMA) += vc_cma/ - obj-$(CONFIG_BCM2708_VCMEM) += vc_mem.o -+obj-$(CONFIG_BCM_VC_SM) += vc_sm/ ---- /dev/null -+++ b/drivers/char/broadcom/vc_sm/Makefile -@@ -0,0 +1,9 @@ -+ccflags-$(CONFIG_BCM_VC_SM) += -Werror -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -+ccflags-$(CONFIG_BCM_VC_SM) += -I"drivers/staging/vc04_services" -I"drivers/staging/vc04_services/interface/vchi" -I"drivers/staging/vc04_services/interface/vchiq_arm" -I"$(srctree)/fs/" -+ccflags-$(CONFIG_BCM_VC_SM) += -DOS_ASSERT_FAILURE -D__STDC_VERSION=199901L -D__STDC_VERSION__=199901L -D__VCCOREVER__=0 -D__KERNEL__ -D__linux__ -+ -+obj-$(CONFIG_BCM_VC_SM) := vc-sm.o -+ -+vc-sm-objs := \ -+ vmcs_sm.o \ -+ vc_vchi_sm.o ---- /dev/null -+++ b/drivers/char/broadcom/vc_sm/vc_sm_defs.h -@@ -0,0 +1,181 @@ -+/***************************************************************************** -+* Copyright 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#ifndef __VC_SM_DEFS_H__INCLUDED__ -+#define __VC_SM_DEFS_H__INCLUDED__ -+ -+/* FourCC code used for VCHI connection */ -+#define VC_SM_SERVER_NAME MAKE_FOURCC("SMEM") -+ -+/* Maximum message length */ -+#define VC_SM_MAX_MSG_LEN (sizeof(VC_SM_MSG_UNION_T) + \ -+ sizeof(VC_SM_MSG_HDR_T)) -+#define VC_SM_MAX_RSP_LEN (sizeof(VC_SM_MSG_UNION_T)) -+ -+/* Resource name maximum size */ -+#define VC_SM_RESOURCE_NAME 32 -+ -+/* All message types supported for HOST->VC direction */ -+typedef enum { -+ /* Allocate shared memory block */ -+ VC_SM_MSG_TYPE_ALLOC, -+ /* Lock allocated shared memory block */ -+ VC_SM_MSG_TYPE_LOCK, -+ /* Unlock allocated shared memory block */ -+ VC_SM_MSG_TYPE_UNLOCK, -+ /* Unlock allocated shared memory block, do not answer command */ -+ VC_SM_MSG_TYPE_UNLOCK_NOANS, -+ /* Free shared memory block */ -+ VC_SM_MSG_TYPE_FREE, -+ /* Resize a shared memory block */ -+ VC_SM_MSG_TYPE_RESIZE, -+ /* Walk the allocated shared memory block(s) */ -+ VC_SM_MSG_TYPE_WALK_ALLOC, -+ -+ /* A previously applied action will need to be reverted */ -+ VC_SM_MSG_TYPE_ACTION_CLEAN, -+ VC_SM_MSG_TYPE_MAX -+} VC_SM_MSG_TYPE; -+ -+/* Type of memory to be allocated */ -+typedef enum { -+ VC_SM_ALLOC_CACHED, -+ VC_SM_ALLOC_NON_CACHED, -+ -+} VC_SM_ALLOC_TYPE_T; -+ -+/* Message header for all messages in HOST->VC direction */ -+typedef struct { -+ int32_t type; -+ uint32_t trans_id; -+ uint8_t body[0]; -+ -+} VC_SM_MSG_HDR_T; -+ -+/* Request to allocate memory (HOST->VC) */ -+typedef struct { -+ /* type of memory to allocate */ -+ VC_SM_ALLOC_TYPE_T type; -+ /* byte amount of data to allocate per unit */ -+ uint32_t base_unit; -+ /* number of unit to allocate */ -+ uint32_t num_unit; -+ /* alignement to be applied on allocation */ -+ uint32_t alignement; -+ /* identity of who allocated this block */ -+ uint32_t allocator; -+ /* resource name (for easier tracking on vc side) */ -+ char name[VC_SM_RESOURCE_NAME]; -+ -+} VC_SM_ALLOC_T; -+ -+/* Result of a requested memory allocation (VC->HOST) */ -+typedef struct { -+ /* Transaction identifier */ -+ uint32_t trans_id; -+ -+ /* Resource handle */ -+ uint32_t res_handle; -+ /* Pointer to resource buffer */ -+ void *res_mem; -+ /* Resource base size (bytes) */ -+ uint32_t res_base_size; -+ /* Resource number */ -+ uint32_t res_num; -+ -+} VC_SM_ALLOC_RESULT_T; -+ -+/* Request to free a previously allocated memory (HOST->VC) */ -+typedef struct { -+ /* Resource handle (returned from alloc) */ -+ uint32_t res_handle; -+ /* Resource buffer (returned from alloc) */ -+ void *res_mem; -+ -+} VC_SM_FREE_T; -+ -+/* Request to lock a previously allocated memory (HOST->VC) */ -+typedef struct { -+ /* Resource handle (returned from alloc) */ -+ uint32_t res_handle; -+ /* Resource buffer (returned from alloc) */ -+ void *res_mem; -+ -+} VC_SM_LOCK_UNLOCK_T; -+ -+/* Request to resize a previously allocated memory (HOST->VC) */ -+typedef struct { -+ /* Resource handle (returned from alloc) */ -+ uint32_t res_handle; -+ /* Resource buffer (returned from alloc) */ -+ void *res_mem; -+ /* Resource *new* size requested (bytes) */ -+ uint32_t res_new_size; -+ -+} VC_SM_RESIZE_T; -+ -+/* Result of a requested memory lock (VC->HOST) */ -+typedef struct { -+ /* Transaction identifier */ -+ uint32_t trans_id; -+ -+ /* Resource handle */ -+ uint32_t res_handle; -+ /* Pointer to resource buffer */ -+ void *res_mem; -+ /* Pointer to former resource buffer if the memory -+ * was reallocated */ -+ void *res_old_mem; -+ -+} VC_SM_LOCK_RESULT_T; -+ -+/* Generic result for a request (VC->HOST) */ -+typedef struct { -+ /* Transaction identifier */ -+ uint32_t trans_id; -+ -+ int32_t success; -+ -+} VC_SM_RESULT_T; -+ -+/* Request to revert a previously applied action (HOST->VC) */ -+typedef struct { -+ /* Action of interest */ -+ VC_SM_MSG_TYPE res_action; -+ /* Transaction identifier for the action of interest */ -+ uint32_t action_trans_id; -+ -+} VC_SM_ACTION_CLEAN_T; -+ -+/* Request to remove all data associated with a given allocator (HOST->VC) */ -+typedef struct { -+ /* Allocator identifier */ -+ uint32_t allocator; -+ -+} VC_SM_FREE_ALL_T; -+ -+/* Union of ALL messages */ -+typedef union { -+ VC_SM_ALLOC_T alloc; -+ VC_SM_ALLOC_RESULT_T alloc_result; -+ VC_SM_FREE_T free; -+ VC_SM_ACTION_CLEAN_T action_clean; -+ VC_SM_RESIZE_T resize; -+ VC_SM_LOCK_RESULT_T lock_result; -+ VC_SM_RESULT_T result; -+ VC_SM_FREE_ALL_T free_all; -+ -+} VC_SM_MSG_UNION_T; -+ -+#endif /* __VC_SM_DEFS_H__INCLUDED__ */ ---- /dev/null -+++ b/drivers/char/broadcom/vc_sm/vc_sm_knl.h -@@ -0,0 +1,55 @@ -+/***************************************************************************** -+* Copyright 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#ifndef __VC_SM_KNL_H__INCLUDED__ -+#define __VC_SM_KNL_H__INCLUDED__ -+ -+#if !defined(__KERNEL__) -+#error "This interface is for kernel use only..." -+#endif -+ -+/* Type of memory to be locked (ie mapped) */ -+typedef enum { -+ VC_SM_LOCK_CACHED, -+ VC_SM_LOCK_NON_CACHED, -+ -+} VC_SM_LOCK_CACHE_MODE_T; -+ -+/* Allocate a shared memory handle and block. -+*/ -+int vc_sm_alloc(VC_SM_ALLOC_T *alloc, int *handle); -+ -+/* Free a previously allocated shared memory handle and block. -+*/ -+int vc_sm_free(int handle); -+ -+/* Lock a memory handle for use by kernel. -+*/ -+int vc_sm_lock(int handle, VC_SM_LOCK_CACHE_MODE_T mode, -+ long unsigned int *data); -+ -+/* Unlock a memory handle in use by kernel. -+*/ -+int vc_sm_unlock(int handle, int flush, int no_vc_unlock); -+ -+/* Get an internal resource handle mapped from the external one. -+*/ -+int vc_sm_int_handle(int handle); -+ -+/* Map a shared memory region for use by kernel. -+*/ -+int vc_sm_map(int handle, unsigned int sm_addr, VC_SM_LOCK_CACHE_MODE_T mode, -+ long unsigned int *data); -+ -+#endif /* __VC_SM_KNL_H__INCLUDED__ */ ---- /dev/null -+++ b/drivers/char/broadcom/vc_sm/vc_vchi_sm.c -@@ -0,0 +1,492 @@ -+/***************************************************************************** -+* Copyright 2011-2012 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+/* ---- Include Files ----------------------------------------------------- */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "vc_vchi_sm.h" -+ -+#define VC_SM_VER 1 -+#define VC_SM_MIN_VER 0 -+ -+/* ---- Private Constants and Types -------------------------------------- */ -+ -+/* Command blocks come from a pool */ -+#define SM_MAX_NUM_CMD_RSP_BLKS 32 -+ -+struct sm_cmd_rsp_blk { -+ struct list_head head; /* To create lists */ -+ struct semaphore sema; /* To be signaled when the response is there */ -+ -+ uint16_t id; -+ uint16_t length; -+ -+ uint8_t msg[VC_SM_MAX_MSG_LEN]; -+ -+ uint32_t wait:1; -+ uint32_t sent:1; -+ uint32_t alloc:1; -+ -+}; -+ -+struct sm_instance { -+ uint32_t num_connections; -+ VCHI_SERVICE_HANDLE_T vchi_handle[VCHI_MAX_NUM_CONNECTIONS]; -+ struct task_struct *io_thread; -+ struct semaphore io_sema; -+ -+ uint32_t trans_id; -+ -+ struct mutex lock; -+ struct list_head cmd_list; -+ struct list_head rsp_list; -+ struct list_head dead_list; -+ -+ struct sm_cmd_rsp_blk free_blk[SM_MAX_NUM_CMD_RSP_BLKS]; -+ struct list_head free_list; -+ struct mutex free_lock; -+ struct semaphore free_sema; -+ -+}; -+ -+/* ---- Private Variables ------------------------------------------------ */ -+ -+/* ---- Private Function Prototypes -------------------------------------- */ -+ -+/* ---- Private Functions ------------------------------------------------ */ -+static struct -+sm_cmd_rsp_blk *vc_vchi_cmd_create(struct sm_instance *instance, -+ VC_SM_MSG_TYPE id, void *msg, -+ uint32_t size, int wait) -+{ -+ struct sm_cmd_rsp_blk *blk; -+ VC_SM_MSG_HDR_T *hdr; -+ -+ if (down_interruptible(&instance->free_sema)) { -+ blk = kmalloc(sizeof(*blk), GFP_KERNEL); -+ if (!blk) -+ return NULL; -+ -+ blk->alloc = 1; -+ sema_init(&blk->sema, 0); -+ } else { -+ mutex_lock(&instance->free_lock); -+ blk = -+ list_first_entry(&instance->free_list, -+ struct sm_cmd_rsp_blk, head); -+ list_del(&blk->head); -+ mutex_unlock(&instance->free_lock); -+ } -+ -+ blk->sent = 0; -+ blk->wait = wait; -+ blk->length = sizeof(*hdr) + size; -+ -+ hdr = (VC_SM_MSG_HDR_T *) blk->msg; -+ hdr->type = id; -+ mutex_lock(&instance->lock); -+ hdr->trans_id = blk->id = ++instance->trans_id; -+ mutex_unlock(&instance->lock); -+ -+ if (size) -+ memcpy(hdr->body, msg, size); -+ -+ return blk; -+} -+ -+static void -+vc_vchi_cmd_delete(struct sm_instance *instance, struct sm_cmd_rsp_blk *blk) -+{ -+ if (blk->alloc) { -+ kfree(blk); -+ return; -+ } -+ -+ mutex_lock(&instance->free_lock); -+ list_add(&blk->head, &instance->free_list); -+ mutex_unlock(&instance->free_lock); -+ up(&instance->free_sema); -+} -+ -+static int vc_vchi_sm_videocore_io(void *arg) -+{ -+ struct sm_instance *instance = arg; -+ struct sm_cmd_rsp_blk *cmd = NULL, *cmd_tmp; -+ VC_SM_RESULT_T *reply; -+ uint32_t reply_len; -+ int32_t status; -+ int svc_use = 1; -+ -+ while (1) { -+ if (svc_use) -+ vchi_service_release(instance->vchi_handle[0]); -+ svc_use = 0; -+ if (!down_interruptible(&instance->io_sema)) { -+ vchi_service_use(instance->vchi_handle[0]); -+ svc_use = 1; -+ -+ do { -+ unsigned int flags; -+ /* -+ * Get new command and move it to response list -+ */ -+ mutex_lock(&instance->lock); -+ if (list_empty(&instance->cmd_list)) { -+ /* no more commands to process */ -+ mutex_unlock(&instance->lock); -+ break; -+ } -+ cmd = -+ list_first_entry(&instance->cmd_list, -+ struct sm_cmd_rsp_blk, -+ head); -+ list_move(&cmd->head, &instance->rsp_list); -+ cmd->sent = 1; -+ mutex_unlock(&instance->lock); -+ -+ /* Send the command */ -+ flags = VCHI_FLAGS_BLOCK_UNTIL_QUEUED; -+ status = vchi_msg_queue( -+ instance->vchi_handle[0], -+ cmd->msg, cmd->length, -+ flags, NULL); -+ if (status) { -+ pr_err("%s: failed to queue message (%d)", -+ __func__, status); -+ } -+ -+ /* If no reply is needed then we're done */ -+ if (!cmd->wait) { -+ mutex_lock(&instance->lock); -+ list_del(&cmd->head); -+ mutex_unlock(&instance->lock); -+ vc_vchi_cmd_delete(instance, cmd); -+ continue; -+ } -+ -+ if (status) { -+ up(&cmd->sema); -+ continue; -+ } -+ -+ } while (1); -+ -+ while (!vchi_msg_peek -+ (instance->vchi_handle[0], (void **)&reply, -+ &reply_len, VCHI_FLAGS_NONE)) { -+ mutex_lock(&instance->lock); -+ list_for_each_entry(cmd, &instance->rsp_list, -+ head) { -+ if (cmd->id == reply->trans_id) -+ break; -+ } -+ mutex_unlock(&instance->lock); -+ -+ if (&cmd->head == &instance->rsp_list) { -+ pr_debug("%s: received response %u, throw away...", -+ __func__, reply->trans_id); -+ } else if (reply_len > sizeof(cmd->msg)) { -+ pr_err("%s: reply too big (%u) %u, throw away...", -+ __func__, reply_len, -+ reply->trans_id); -+ } else { -+ memcpy(cmd->msg, reply, reply_len); -+ up(&cmd->sema); -+ } -+ -+ vchi_msg_remove(instance->vchi_handle[0]); -+ } -+ -+ /* Go through the dead list and free them */ -+ mutex_lock(&instance->lock); -+ list_for_each_entry_safe(cmd, cmd_tmp, -+ &instance->dead_list, head) { -+ list_del(&cmd->head); -+ vc_vchi_cmd_delete(instance, cmd); -+ } -+ mutex_unlock(&instance->lock); -+ } -+ } -+ -+ return 0; -+} -+ -+static void vc_sm_vchi_callback(void *param, -+ const VCHI_CALLBACK_REASON_T reason, -+ void *msg_handle) -+{ -+ struct sm_instance *instance = param; -+ -+ (void)msg_handle; -+ -+ switch (reason) { -+ case VCHI_CALLBACK_MSG_AVAILABLE: -+ up(&instance->io_sema); -+ break; -+ -+ case VCHI_CALLBACK_SERVICE_CLOSED: -+ pr_info("%s: service CLOSED!!", __func__); -+ default: -+ break; -+ } -+} -+ -+VC_VCHI_SM_HANDLE_T vc_vchi_sm_init(VCHI_INSTANCE_T vchi_instance, -+ VCHI_CONNECTION_T **vchi_connections, -+ uint32_t num_connections) -+{ -+ uint32_t i; -+ struct sm_instance *instance; -+ int status; -+ -+ pr_debug("%s: start", __func__); -+ -+ if (num_connections > VCHI_MAX_NUM_CONNECTIONS) { -+ pr_err("%s: unsupported number of connections %u (max=%u)", -+ __func__, num_connections, VCHI_MAX_NUM_CONNECTIONS); -+ -+ goto err_null; -+ } -+ /* Allocate memory for this instance */ -+ instance = kzalloc(sizeof(*instance), GFP_KERNEL); -+ -+ /* Misc initialisations */ -+ mutex_init(&instance->lock); -+ sema_init(&instance->io_sema, 0); -+ INIT_LIST_HEAD(&instance->cmd_list); -+ INIT_LIST_HEAD(&instance->rsp_list); -+ INIT_LIST_HEAD(&instance->dead_list); -+ INIT_LIST_HEAD(&instance->free_list); -+ sema_init(&instance->free_sema, SM_MAX_NUM_CMD_RSP_BLKS); -+ mutex_init(&instance->free_lock); -+ for (i = 0; i < SM_MAX_NUM_CMD_RSP_BLKS; i++) { -+ sema_init(&instance->free_blk[i].sema, 0); -+ list_add(&instance->free_blk[i].head, &instance->free_list); -+ } -+ -+ /* Open the VCHI service connections */ -+ instance->num_connections = num_connections; -+ for (i = 0; i < num_connections; i++) { -+ SERVICE_CREATION_T params = { -+ VCHI_VERSION_EX(VC_SM_VER, VC_SM_MIN_VER), -+ VC_SM_SERVER_NAME, -+ vchi_connections[i], -+ 0, -+ 0, -+ vc_sm_vchi_callback, -+ instance, -+ 0, -+ 0, -+ 0, -+ }; -+ -+ status = vchi_service_open(vchi_instance, -+ ¶ms, &instance->vchi_handle[i]); -+ if (status) { -+ pr_err("%s: failed to open VCHI service (%d)", -+ __func__, status); -+ -+ goto err_close_services; -+ } -+ } -+ -+ /* Create the thread which takes care of all io to/from videoocore. */ -+ instance->io_thread = kthread_create(&vc_vchi_sm_videocore_io, -+ (void *)instance, "SMIO"); -+ if (instance->io_thread == NULL) { -+ pr_err("%s: failed to create SMIO thread", __func__); -+ -+ goto err_close_services; -+ } -+ set_user_nice(instance->io_thread, -10); -+ wake_up_process(instance->io_thread); -+ -+ pr_debug("%s: success - instance 0x%x", __func__, (unsigned)instance); -+ return instance; -+ -+err_close_services: -+ for (i = 0; i < instance->num_connections; i++) { -+ if (instance->vchi_handle[i] != NULL) -+ vchi_service_close(instance->vchi_handle[i]); -+ } -+ kfree(instance); -+err_null: -+ pr_debug("%s: FAILED", __func__); -+ return NULL; -+} -+ -+int vc_vchi_sm_stop(VC_VCHI_SM_HANDLE_T *handle) -+{ -+ struct sm_instance *instance; -+ uint32_t i; -+ -+ if (handle == NULL) { -+ pr_err("%s: invalid pointer to handle %p", __func__, handle); -+ goto lock; -+ } -+ -+ if (*handle == NULL) { -+ pr_err("%s: invalid handle %p", __func__, *handle); -+ goto lock; -+ } -+ -+ instance = *handle; -+ -+ /* Close all VCHI service connections */ -+ for (i = 0; i < instance->num_connections; i++) { -+ int32_t success; -+ vchi_service_use(instance->vchi_handle[i]); -+ -+ success = vchi_service_close(instance->vchi_handle[i]); -+ } -+ -+ kfree(instance); -+ -+ *handle = NULL; -+ return 0; -+ -+lock: -+ return -EINVAL; -+} -+ -+int vc_vchi_sm_send_msg(VC_VCHI_SM_HANDLE_T handle, -+ VC_SM_MSG_TYPE msg_id, -+ void *msg, uint32_t msg_size, -+ void *result, uint32_t result_size, -+ uint32_t *cur_trans_id, uint8_t wait_reply) -+{ -+ int status = 0; -+ struct sm_instance *instance = handle; -+ struct sm_cmd_rsp_blk *cmd_blk; -+ -+ if (handle == NULL) { -+ pr_err("%s: invalid handle", __func__); -+ return -EINVAL; -+ } -+ if (msg == NULL) { -+ pr_err("%s: invalid msg pointer", __func__); -+ return -EINVAL; -+ } -+ -+ cmd_blk = -+ vc_vchi_cmd_create(instance, msg_id, msg, msg_size, wait_reply); -+ if (cmd_blk == NULL) { -+ pr_err("[%s]: failed to allocate global tracking resource", -+ __func__); -+ return -ENOMEM; -+ } -+ -+ if (cur_trans_id != NULL) -+ *cur_trans_id = cmd_blk->id; -+ -+ mutex_lock(&instance->lock); -+ list_add_tail(&cmd_blk->head, &instance->cmd_list); -+ mutex_unlock(&instance->lock); -+ up(&instance->io_sema); -+ -+ if (!wait_reply) -+ /* We're done */ -+ return 0; -+ -+ /* Wait for the response */ -+ if (down_interruptible(&cmd_blk->sema)) { -+ mutex_lock(&instance->lock); -+ if (!cmd_blk->sent) { -+ list_del(&cmd_blk->head); -+ mutex_unlock(&instance->lock); -+ vc_vchi_cmd_delete(instance, cmd_blk); -+ return -ENXIO; -+ } -+ mutex_unlock(&instance->lock); -+ -+ mutex_lock(&instance->lock); -+ list_move(&cmd_blk->head, &instance->dead_list); -+ mutex_unlock(&instance->lock); -+ up(&instance->io_sema); -+ return -EINTR; /* We're done */ -+ } -+ -+ if (result && result_size) { -+ memcpy(result, cmd_blk->msg, result_size); -+ } else { -+ VC_SM_RESULT_T *res = (VC_SM_RESULT_T *) cmd_blk->msg; -+ status = (res->success == 0) ? 0 : -ENXIO; -+ } -+ -+ mutex_lock(&instance->lock); -+ list_del(&cmd_blk->head); -+ mutex_unlock(&instance->lock); -+ vc_vchi_cmd_delete(instance, cmd_blk); -+ return status; -+} -+ -+int vc_vchi_sm_alloc(VC_VCHI_SM_HANDLE_T handle, VC_SM_ALLOC_T *msg, -+ VC_SM_ALLOC_RESULT_T *result, uint32_t *cur_trans_id) -+{ -+ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_ALLOC, -+ msg, sizeof(*msg), result, sizeof(*result), -+ cur_trans_id, 1); -+} -+ -+int vc_vchi_sm_free(VC_VCHI_SM_HANDLE_T handle, -+ VC_SM_FREE_T *msg, uint32_t *cur_trans_id) -+{ -+ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_FREE, -+ msg, sizeof(*msg), 0, 0, cur_trans_id, 0); -+} -+ -+int vc_vchi_sm_lock(VC_VCHI_SM_HANDLE_T handle, -+ VC_SM_LOCK_UNLOCK_T *msg, -+ VC_SM_LOCK_RESULT_T *result, uint32_t *cur_trans_id) -+{ -+ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_LOCK, -+ msg, sizeof(*msg), result, sizeof(*result), -+ cur_trans_id, 1); -+} -+ -+int vc_vchi_sm_unlock(VC_VCHI_SM_HANDLE_T handle, -+ VC_SM_LOCK_UNLOCK_T *msg, -+ uint32_t *cur_trans_id, uint8_t wait_reply) -+{ -+ return vc_vchi_sm_send_msg(handle, wait_reply ? -+ VC_SM_MSG_TYPE_UNLOCK : -+ VC_SM_MSG_TYPE_UNLOCK_NOANS, msg, -+ sizeof(*msg), 0, 0, cur_trans_id, -+ wait_reply); -+} -+ -+int vc_vchi_sm_resize(VC_VCHI_SM_HANDLE_T handle, VC_SM_RESIZE_T *msg, -+ uint32_t *cur_trans_id) -+{ -+ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_RESIZE, -+ msg, sizeof(*msg), 0, 0, cur_trans_id, 1); -+} -+ -+int vc_vchi_sm_walk_alloc(VC_VCHI_SM_HANDLE_T handle) -+{ -+ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_WALK_ALLOC, -+ 0, 0, 0, 0, 0, 0); -+} -+ -+int vc_vchi_sm_clean_up(VC_VCHI_SM_HANDLE_T handle, VC_SM_ACTION_CLEAN_T *msg) -+{ -+ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_ACTION_CLEAN, -+ msg, sizeof(*msg), 0, 0, 0, 0); -+} ---- /dev/null -+++ b/drivers/char/broadcom/vc_sm/vc_vchi_sm.h -@@ -0,0 +1,82 @@ -+/***************************************************************************** -+* Copyright 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#ifndef __VC_VCHI_SM_H__INCLUDED__ -+#define __VC_VCHI_SM_H__INCLUDED__ -+ -+#include "interface/vchi/vchi.h" -+ -+#include "vc_sm_defs.h" -+ -+/* Forward declare. -+*/ -+typedef struct sm_instance *VC_VCHI_SM_HANDLE_T; -+ -+/* Initialize the shared memory service, opens up vchi connection to talk to it. -+*/ -+VC_VCHI_SM_HANDLE_T vc_vchi_sm_init(VCHI_INSTANCE_T vchi_instance, -+ VCHI_CONNECTION_T **vchi_connections, -+ uint32_t num_connections); -+ -+/* Terminates the shared memory service. -+*/ -+int vc_vchi_sm_stop(VC_VCHI_SM_HANDLE_T *handle); -+ -+/* Ask the shared memory service to allocate some memory on videocre and -+** return the result of this allocation (which upon success will be a pointer -+** to some memory in videocore space). -+*/ -+int vc_vchi_sm_alloc(VC_VCHI_SM_HANDLE_T handle, -+ VC_SM_ALLOC_T *alloc, -+ VC_SM_ALLOC_RESULT_T *alloc_result, uint32_t *trans_id); -+ -+/* Ask the shared memory service to free up some memory that was previously -+** allocated by the vc_vchi_sm_alloc function call. -+*/ -+int vc_vchi_sm_free(VC_VCHI_SM_HANDLE_T handle, -+ VC_SM_FREE_T *free, uint32_t *trans_id); -+ -+/* Ask the shared memory service to lock up some memory that was previously -+** allocated by the vc_vchi_sm_alloc function call. -+*/ -+int vc_vchi_sm_lock(VC_VCHI_SM_HANDLE_T handle, -+ VC_SM_LOCK_UNLOCK_T *lock_unlock, -+ VC_SM_LOCK_RESULT_T *lock_result, uint32_t *trans_id); -+ -+/* Ask the shared memory service to unlock some memory that was previously -+** allocated by the vc_vchi_sm_alloc function call. -+*/ -+int vc_vchi_sm_unlock(VC_VCHI_SM_HANDLE_T handle, -+ VC_SM_LOCK_UNLOCK_T *lock_unlock, -+ uint32_t *trans_id, uint8_t wait_reply); -+ -+/* Ask the shared memory service to resize some memory that was previously -+** allocated by the vc_vchi_sm_alloc function call. -+*/ -+int vc_vchi_sm_resize(VC_VCHI_SM_HANDLE_T handle, -+ VC_SM_RESIZE_T *resize, uint32_t *trans_id); -+ -+/* Walk the allocated resources on the videocore side, the allocation will -+** show up in the log. This is purely for debug/information and takes no -+** specific actions. -+*/ -+int vc_vchi_sm_walk_alloc(VC_VCHI_SM_HANDLE_T handle); -+ -+/* Clean up following a previously interrupted action which left the system -+** in a bad state of some sort. -+*/ -+int vc_vchi_sm_clean_up(VC_VCHI_SM_HANDLE_T handle, -+ VC_SM_ACTION_CLEAN_T *action_clean); -+ -+#endif /* __VC_VCHI_SM_H__INCLUDED__ */ ---- /dev/null -+++ b/drivers/char/broadcom/vc_sm/vmcs_sm.c -@@ -0,0 +1,3213 @@ -+/***************************************************************************** -+* Copyright 2011-2012 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+/* ---- Include Files ----------------------------------------------------- */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "vchiq_connected.h" -+#include "vc_vchi_sm.h" -+ -+#include -+#include "vc_sm_knl.h" -+ -+/* ---- Private Constants and Types --------------------------------------- */ -+ -+#define DEVICE_NAME "vcsm" -+#define DEVICE_MINOR 0 -+ -+#define VC_SM_DIR_ROOT_NAME "vc-smem" -+#define VC_SM_DIR_ALLOC_NAME "alloc" -+#define VC_SM_STATE "state" -+#define VC_SM_STATS "statistics" -+#define VC_SM_RESOURCES "resources" -+#define VC_SM_DEBUG "debug" -+#define VC_SM_WRITE_BUF_SIZE 128 -+ -+/* Statistics tracked per resource and globally. -+*/ -+enum SM_STATS_T { -+ /* Attempt. */ -+ ALLOC, -+ FREE, -+ LOCK, -+ UNLOCK, -+ MAP, -+ FLUSH, -+ INVALID, -+ -+ END_ATTEMPT, -+ -+ /* Failure. */ -+ ALLOC_FAIL, -+ FREE_FAIL, -+ LOCK_FAIL, -+ UNLOCK_FAIL, -+ MAP_FAIL, -+ FLUSH_FAIL, -+ INVALID_FAIL, -+ -+ END_ALL, -+ -+}; -+ -+static const char *const sm_stats_human_read[] = { -+ "Alloc", -+ "Free", -+ "Lock", -+ "Unlock", -+ "Map", -+ "Cache Flush", -+ "Cache Invalidate", -+}; -+ -+typedef int (*VC_SM_SHOW) (struct seq_file *s, void *v); -+struct SM_PDE_T { -+ VC_SM_SHOW show; /* Debug fs function hookup. */ -+ struct dentry *dir_entry; /* Debug fs directory entry. */ -+ void *priv_data; /* Private data */ -+ -+}; -+ -+/* Single resource allocation tracked for all devices. -+*/ -+struct sm_mmap { -+ struct list_head map_list; /* Linked list of maps. */ -+ -+ struct SM_RESOURCE_T *resource; /* Pointer to the resource. */ -+ -+ pid_t res_pid; /* PID owning that resource. */ -+ unsigned int res_vc_hdl; /* Resource handle (videocore). */ -+ unsigned int res_usr_hdl; /* Resource handle (user). */ -+ -+ long unsigned int res_addr; /* Mapped virtual address. */ -+ struct vm_area_struct *vma; /* VM area for this mapping. */ -+ unsigned int ref_count; /* Reference count to this vma. */ -+ -+ /* Used to link maps associated with a resource. */ -+ struct list_head resource_map_list; -+}; -+ -+/* Single resource allocation tracked for each opened device. -+*/ -+struct SM_RESOURCE_T { -+ struct list_head resource_list; /* List of resources. */ -+ struct list_head global_resource_list; /* Global list of resources. */ -+ -+ pid_t pid; /* PID owning that resource. */ -+ uint32_t res_guid; /* Unique identifier. */ -+ uint32_t lock_count; /* Lock count for this resource. */ -+ uint32_t ref_count; /* Ref count for this resource. */ -+ -+ uint32_t res_handle; /* Resource allocation handle. */ -+ void *res_base_mem; /* Resource base memory address. */ -+ uint32_t res_size; /* Resource size allocated. */ -+ enum vmcs_sm_cache_e res_cached; /* Resource cache type. */ -+ struct SM_RESOURCE_T *res_shared; /* Shared resource */ -+ -+ enum SM_STATS_T res_stats[END_ALL]; /* Resource statistics. */ -+ -+ uint8_t map_count; /* Counter of mappings for this resource. */ -+ struct list_head map_list; /* Maps associated with a resource. */ -+ -+ struct SM_PRIV_DATA_T *private; -+}; -+ -+/* Private file data associated with each opened device. -+*/ -+struct SM_PRIV_DATA_T { -+ struct list_head resource_list; /* List of resources. */ -+ -+ pid_t pid; /* PID of creator. */ -+ -+ struct dentry *dir_pid; /* Debug fs entries root. */ -+ struct SM_PDE_T dir_stats; /* Debug fs entries statistics sub-tree. */ -+ struct SM_PDE_T dir_res; /* Debug fs resource sub-tree. */ -+ -+ int restart_sys; /* Tracks restart on interrupt. */ -+ VC_SM_MSG_TYPE int_action; /* Interrupted action. */ -+ uint32_t int_trans_id; /* Interrupted transaction. */ -+ -+}; -+ -+/* Global state information. -+*/ -+struct SM_STATE_T { -+ VC_VCHI_SM_HANDLE_T sm_handle; /* Handle for videocore service. */ -+ struct dentry *dir_root; /* Debug fs entries root. */ -+ struct dentry *dir_alloc; /* Debug fs entries allocations. */ -+ struct SM_PDE_T dir_stats; /* Debug fs entries statistics sub-tree. */ -+ struct SM_PDE_T dir_state; /* Debug fs entries state sub-tree. */ -+ struct dentry *debug; /* Debug fs entries debug. */ -+ -+ struct mutex map_lock; /* Global map lock. */ -+ struct list_head map_list; /* List of maps. */ -+ struct list_head resource_list; /* List of resources. */ -+ -+ enum SM_STATS_T deceased[END_ALL]; /* Natural termination stats. */ -+ enum SM_STATS_T terminated[END_ALL]; /* Forced termination stats. */ -+ uint32_t res_deceased_cnt; /* Natural termination counter. */ -+ uint32_t res_terminated_cnt; /* Forced termination counter. */ -+ -+ struct cdev sm_cdev; /* Device. */ -+ dev_t sm_devid; /* Device identifier. */ -+ struct class *sm_class; /* Class. */ -+ struct device *sm_dev; /* Device. */ -+ -+ struct SM_PRIV_DATA_T *data_knl; /* Kernel internal data tracking. */ -+ -+ struct mutex lock; /* Global lock. */ -+ uint32_t guid; /* GUID (next) tracker. */ -+ -+}; -+ -+/* ---- Private Variables ----------------------------------------------- */ -+ -+static struct SM_STATE_T *sm_state; -+static int sm_inited; -+ -+#if 0 -+static const char *const sm_cache_map_vector[] = { -+ "(null)", -+ "host", -+ "videocore", -+ "host+videocore", -+}; -+#endif -+ -+/* ---- Private Function Prototypes -------------------------------------- */ -+ -+/* ---- Private Functions ------------------------------------------------ */ -+ -+static inline unsigned vcaddr_to_pfn(unsigned long vc_addr) -+{ -+ unsigned long pfn = vc_addr & 0x3FFFFFFF; -+ pfn += mm_vc_mem_phys_addr; -+ pfn >>= PAGE_SHIFT; -+ return pfn; -+} -+ -+/* Carries over to the state statistics the statistics once owned by a deceased -+** resource. -+*/ -+static void vc_sm_resource_deceased(struct SM_RESOURCE_T *p_res, int terminated) -+{ -+ if (sm_state != NULL) { -+ if (p_res != NULL) { -+ int ix; -+ -+ if (terminated) -+ sm_state->res_terminated_cnt++; -+ else -+ sm_state->res_deceased_cnt++; -+ -+ for (ix = 0; ix < END_ALL; ix++) { -+ if (terminated) -+ sm_state->terminated[ix] += -+ p_res->res_stats[ix]; -+ else -+ sm_state->deceased[ix] += -+ p_res->res_stats[ix]; -+ } -+ } -+ } -+} -+ -+/* Fetch a videocore handle corresponding to a mapping of the pid+address -+** returns 0 (ie NULL) if no such handle exists in the global map. -+*/ -+static unsigned int vmcs_sm_vc_handle_from_pid_and_address(unsigned int pid, -+ unsigned int addr) -+{ -+ struct sm_mmap *map = NULL; -+ unsigned int handle = 0; -+ -+ if (!sm_state || addr == 0) -+ goto out; -+ -+ mutex_lock(&(sm_state->map_lock)); -+ -+ /* Lookup the resource. -+ */ -+ if (!list_empty(&sm_state->map_list)) { -+ list_for_each_entry(map, &sm_state->map_list, map_list) { -+ if (map->res_pid != pid || map->res_addr != addr) -+ continue; -+ -+ pr_debug("[%s]: global map %p (pid %u, addr %lx) -> vc-hdl %x (usr-hdl %x)\n", -+ __func__, map, map->res_pid, map->res_addr, -+ map->res_vc_hdl, map->res_usr_hdl); -+ -+ handle = map->res_vc_hdl; -+ break; -+ } -+ } -+ -+ mutex_unlock(&(sm_state->map_lock)); -+ -+out: -+ /* Use a debug log here as it may be a valid situation that we query -+ ** for something that is not mapped, we do not want a kernel log each -+ ** time around. -+ ** -+ ** There are other error log that would pop up accordingly if someone -+ ** subsequently tries to use something invalid after being told not to -+ ** use it... -+ */ -+ if (handle == 0) { -+ pr_debug("[%s]: not a valid map (pid %u, addr %x)\n", -+ __func__, pid, addr); -+ } -+ -+ return handle; -+} -+ -+/* Fetch a user handle corresponding to a mapping of the pid+address -+** returns 0 (ie NULL) if no such handle exists in the global map. -+*/ -+static unsigned int vmcs_sm_usr_handle_from_pid_and_address(unsigned int pid, -+ unsigned int addr) -+{ -+ struct sm_mmap *map = NULL; -+ unsigned int handle = 0; -+ -+ if (!sm_state || addr == 0) -+ goto out; -+ -+ mutex_lock(&(sm_state->map_lock)); -+ -+ /* Lookup the resource. -+ */ -+ if (!list_empty(&sm_state->map_list)) { -+ list_for_each_entry(map, &sm_state->map_list, map_list) { -+ if (map->res_pid != pid || map->res_addr != addr) -+ continue; -+ -+ pr_debug("[%s]: global map %p (pid %u, addr %lx) -> usr-hdl %x (vc-hdl %x)\n", -+ __func__, map, map->res_pid, map->res_addr, -+ map->res_usr_hdl, map->res_vc_hdl); -+ -+ handle = map->res_usr_hdl; -+ break; -+ } -+ } -+ -+ mutex_unlock(&(sm_state->map_lock)); -+ -+out: -+ /* Use a debug log here as it may be a valid situation that we query -+ * for something that is not mapped yet. -+ * -+ * There are other error log that would pop up accordingly if someone -+ * subsequently tries to use something invalid after being told not to -+ * use it... -+ */ -+ if (handle == 0) -+ pr_debug("[%s]: not a valid map (pid %u, addr %x)\n", -+ __func__, pid, addr); -+ -+ return handle; -+} -+ -+#if defined(DO_NOT_USE) -+/* Fetch an address corresponding to a mapping of the pid+handle -+** returns 0 (ie NULL) if no such address exists in the global map. -+*/ -+static unsigned int vmcs_sm_usr_address_from_pid_and_vc_handle(unsigned int pid, -+ unsigned int hdl) -+{ -+ struct sm_mmap *map = NULL; -+ unsigned int addr = 0; -+ -+ if (sm_state == NULL || hdl == 0) -+ goto out; -+ -+ mutex_lock(&(sm_state->map_lock)); -+ -+ /* Lookup the resource. -+ */ -+ if (!list_empty(&sm_state->map_list)) { -+ list_for_each_entry(map, &sm_state->map_list, map_list) { -+ if (map->res_pid != pid || map->res_vc_hdl != hdl) -+ continue; -+ -+ pr_debug("[%s]: global map %p (pid %u, vc-hdl %x, usr-hdl %x) -> addr %lx\n", -+ __func__, map, map->res_pid, map->res_vc_hdl, -+ map->res_usr_hdl, map->res_addr); -+ -+ addr = map->res_addr; -+ break; -+ } -+ } -+ -+ mutex_unlock(&(sm_state->map_lock)); -+ -+out: -+ /* Use a debug log here as it may be a valid situation that we query -+ ** for something that is not mapped, we do not want a kernel log each -+ ** time around. -+ ** -+ ** There are other error log that would pop up accordingly if someone -+ ** subsequently tries to use something invalid after being told not to -+ ** use it... -+ */ -+ if (addr == 0) -+ pr_debug("[%s]: not a valid map (pid %u, hdl %x)\n", -+ __func__, pid, hdl); -+ -+ return addr; -+} -+#endif -+ -+/* Fetch an address corresponding to a mapping of the pid+handle -+** returns 0 (ie NULL) if no such address exists in the global map. -+*/ -+static unsigned int vmcs_sm_usr_address_from_pid_and_usr_handle(unsigned int -+ pid, -+ unsigned int -+ hdl) -+{ -+ struct sm_mmap *map = NULL; -+ unsigned int addr = 0; -+ -+ if (sm_state == NULL || hdl == 0) -+ goto out; -+ -+ mutex_lock(&(sm_state->map_lock)); -+ -+ /* Lookup the resource. -+ */ -+ if (!list_empty(&sm_state->map_list)) { -+ list_for_each_entry(map, &sm_state->map_list, map_list) { -+ if (map->res_pid != pid || map->res_usr_hdl != hdl) -+ continue; -+ -+ pr_debug("[%s]: global map %p (pid %u, vc-hdl %x, usr-hdl %x) -> addr %lx\n", -+ __func__, map, map->res_pid, map->res_vc_hdl, -+ map->res_usr_hdl, map->res_addr); -+ -+ addr = map->res_addr; -+ break; -+ } -+ } -+ -+ mutex_unlock(&(sm_state->map_lock)); -+ -+out: -+ /* Use a debug log here as it may be a valid situation that we query -+ * for something that is not mapped, we do not want a kernel log each -+ * time around. -+ * -+ * There are other error log that would pop up accordingly if someone -+ * subsequently tries to use something invalid after being told not to -+ * use it... -+ */ -+ if (addr == 0) -+ pr_debug("[%s]: not a valid map (pid %u, hdl %x)\n", __func__, -+ pid, hdl); -+ -+ return addr; -+} -+ -+/* Adds a resource mapping to the global data list. -+*/ -+static void vmcs_sm_add_map(struct SM_STATE_T *state, -+ struct SM_RESOURCE_T *resource, struct sm_mmap *map) -+{ -+ mutex_lock(&(state->map_lock)); -+ -+ /* Add to the global list of mappings -+ */ -+ list_add(&map->map_list, &state->map_list); -+ -+ /* Add to the list of mappings for this resource -+ */ -+ list_add(&map->resource_map_list, &resource->map_list); -+ resource->map_count++; -+ -+ mutex_unlock(&(state->map_lock)); -+ -+ pr_debug("[%s]: added map %p (pid %u, vc-hdl %x, usr-hdl %x, addr %lx)\n", -+ __func__, map, map->res_pid, map->res_vc_hdl, -+ map->res_usr_hdl, map->res_addr); -+} -+ -+/* Removes a resource mapping from the global data list. -+*/ -+static void vmcs_sm_remove_map(struct SM_STATE_T *state, -+ struct SM_RESOURCE_T *resource, -+ struct sm_mmap *map) -+{ -+ mutex_lock(&(state->map_lock)); -+ -+ /* Remove from the global list of mappings -+ */ -+ list_del(&map->map_list); -+ -+ /* Remove from the list of mapping for this resource -+ */ -+ list_del(&map->resource_map_list); -+ if (resource->map_count > 0) -+ resource->map_count--; -+ -+ mutex_unlock(&(state->map_lock)); -+ -+ pr_debug("[%s]: removed map %p (pid %d, vc-hdl %x, usr-hdl %x, addr %lx)\n", -+ __func__, map, map->res_pid, map->res_vc_hdl, map->res_usr_hdl, -+ map->res_addr); -+ -+ kfree(map); -+} -+ -+/* Read callback for the global state proc entry. -+*/ -+static int vc_sm_global_state_show(struct seq_file *s, void *v) -+{ -+ struct sm_mmap *map = NULL; -+ int map_count = 0; -+ -+ if (sm_state == NULL) -+ return 0; -+ -+ seq_printf(s, "\nVC-ServiceHandle 0x%x\n", -+ (unsigned int)sm_state->sm_handle); -+ -+ /* Log all applicable mapping(s). -+ */ -+ -+ mutex_lock(&(sm_state->map_lock)); -+ -+ if (!list_empty(&sm_state->map_list)) { -+ list_for_each_entry(map, &sm_state->map_list, map_list) { -+ map_count++; -+ -+ seq_printf(s, "\nMapping 0x%x\n", -+ (unsigned int)map); -+ seq_printf(s, " TGID %u\n", -+ map->res_pid); -+ seq_printf(s, " VC-HDL 0x%x\n", -+ map->res_vc_hdl); -+ seq_printf(s, " USR-HDL 0x%x\n", -+ map->res_usr_hdl); -+ seq_printf(s, " USR-ADDR 0x%lx\n", -+ map->res_addr); -+ } -+ } -+ -+ mutex_unlock(&(sm_state->map_lock)); -+ seq_printf(s, "\n\nTotal map count: %d\n\n", map_count); -+ -+ return 0; -+} -+ -+static int vc_sm_global_statistics_show(struct seq_file *s, void *v) -+{ -+ int ix; -+ -+ /* Global state tracked statistics. -+ */ -+ if (sm_state != NULL) { -+ seq_puts(s, "\nDeceased Resources Statistics\n"); -+ -+ seq_printf(s, "\nNatural Cause (%u occurences)\n", -+ sm_state->res_deceased_cnt); -+ for (ix = 0; ix < END_ATTEMPT; ix++) { -+ if (sm_state->deceased[ix] > 0) { -+ seq_printf(s, " %u\t%s\n", -+ sm_state->deceased[ix], -+ sm_stats_human_read[ix]); -+ } -+ } -+ seq_puts(s, "\n"); -+ for (ix = 0; ix < END_ATTEMPT; ix++) { -+ if (sm_state->deceased[ix + END_ATTEMPT] > 0) { -+ seq_printf(s, " %u\tFAILED %s\n", -+ sm_state->deceased[ix + END_ATTEMPT], -+ sm_stats_human_read[ix]); -+ } -+ } -+ -+ seq_printf(s, "\nForcefull (%u occurences)\n", -+ sm_state->res_terminated_cnt); -+ for (ix = 0; ix < END_ATTEMPT; ix++) { -+ if (sm_state->terminated[ix] > 0) { -+ seq_printf(s, " %u\t%s\n", -+ sm_state->terminated[ix], -+ sm_stats_human_read[ix]); -+ } -+ } -+ seq_puts(s, "\n"); -+ for (ix = 0; ix < END_ATTEMPT; ix++) { -+ if (sm_state->terminated[ix + END_ATTEMPT] > 0) { -+ seq_printf(s, " %u\tFAILED %s\n", -+ sm_state->terminated[ix + -+ END_ATTEMPT], -+ sm_stats_human_read[ix]); -+ } -+ } -+ } -+ -+ return 0; -+} -+ -+#if 0 -+/* Read callback for the statistics proc entry. -+*/ -+static int vc_sm_statistics_show(struct seq_file *s, void *v) -+{ -+ int ix; -+ struct SM_PRIV_DATA_T *file_data; -+ struct SM_RESOURCE_T *resource; -+ int res_count = 0; -+ struct SM_PDE_T *p_pde; -+ -+ p_pde = (struct SM_PDE_T *)(s->private); -+ file_data = (struct SM_PRIV_DATA_T *)(p_pde->priv_data); -+ -+ if (file_data == NULL) -+ return 0; -+ -+ /* Per process statistics. -+ */ -+ -+ seq_printf(s, "\nStatistics for TGID %d\n", file_data->pid); -+ -+ mutex_lock(&(sm_state->map_lock)); -+ -+ if (!list_empty(&file_data->resource_list)) { -+ list_for_each_entry(resource, &file_data->resource_list, -+ resource_list) { -+ res_count++; -+ -+ seq_printf(s, "\nGUID: 0x%x\n\n", -+ resource->res_guid); -+ for (ix = 0; ix < END_ATTEMPT; ix++) { -+ if (resource->res_stats[ix] > 0) { -+ seq_printf(s, -+ " %u\t%s\n", -+ resource->res_stats[ix], -+ sm_stats_human_read[ix]); -+ } -+ } -+ seq_puts(s, "\n"); -+ for (ix = 0; ix < END_ATTEMPT; ix++) { -+ if (resource->res_stats[ix + END_ATTEMPT] > 0) { -+ seq_printf(s, -+ " %u\tFAILED %s\n", -+ resource->res_stats[ -+ ix + END_ATTEMPT], -+ sm_stats_human_read[ix]); -+ } -+ } -+ } -+ } -+ -+ mutex_unlock(&(sm_state->map_lock)); -+ -+ seq_printf(s, "\nResources Count %d\n", res_count); -+ -+ return 0; -+} -+#endif -+ -+#if 0 -+/* Read callback for the allocation proc entry. */ -+static int vc_sm_alloc_show(struct seq_file *s, void *v) -+{ -+ struct SM_PRIV_DATA_T *file_data; -+ struct SM_RESOURCE_T *resource; -+ int alloc_count = 0; -+ struct SM_PDE_T *p_pde; -+ -+ p_pde = (struct SM_PDE_T *)(s->private); -+ file_data = (struct SM_PRIV_DATA_T *)(p_pde->priv_data); -+ -+ if (!file_data) -+ return 0; -+ -+ /* Per process statistics. */ -+ seq_printf(s, "\nAllocation for TGID %d\n", file_data->pid); -+ -+ mutex_lock(&(sm_state->map_lock)); -+ -+ if (!list_empty(&file_data->resource_list)) { -+ list_for_each_entry(resource, &file_data->resource_list, -+ resource_list) { -+ alloc_count++; -+ -+ seq_printf(s, "\nGUID: 0x%x\n", -+ resource->res_guid); -+ seq_printf(s, "Lock Count: %u\n", -+ resource->lock_count); -+ seq_printf(s, "Mapped: %s\n", -+ (resource->map_count ? "yes" : "no")); -+ seq_printf(s, "VC-handle: 0x%x\n", -+ resource->res_handle); -+ seq_printf(s, "VC-address: 0x%p\n", -+ resource->res_base_mem); -+ seq_printf(s, "VC-size (bytes): %u\n", -+ resource->res_size); -+ seq_printf(s, "Cache: %s\n", -+ sm_cache_map_vector[resource->res_cached]); -+ } -+ } -+ -+ mutex_unlock(&(sm_state->map_lock)); -+ -+ seq_printf(s, "\n\nTotal allocation count: %d\n\n", alloc_count); -+ -+ return 0; -+} -+#endif -+ -+static int vc_sm_seq_file_show(struct seq_file *s, void *v) -+{ -+ struct SM_PDE_T *sm_pde; -+ -+ sm_pde = (struct SM_PDE_T *)(s->private); -+ -+ if (sm_pde && sm_pde->show) -+ sm_pde->show(s, v); -+ -+ return 0; -+} -+ -+static int vc_sm_single_open(struct inode *inode, struct file *file) -+{ -+ return single_open(file, vc_sm_seq_file_show, inode->i_private); -+} -+ -+static const struct file_operations vc_sm_debug_fs_fops = { -+ .open = vc_sm_single_open, -+ .read = seq_read, -+ .llseek = seq_lseek, -+ .release = single_release, -+}; -+ -+/* Adds a resource to the private data list which tracks all the allocated -+** data. -+*/ -+static void vmcs_sm_add_resource(struct SM_PRIV_DATA_T *privdata, -+ struct SM_RESOURCE_T *resource) -+{ -+ mutex_lock(&(sm_state->map_lock)); -+ list_add(&resource->resource_list, &privdata->resource_list); -+ list_add(&resource->global_resource_list, &sm_state->resource_list); -+ mutex_unlock(&(sm_state->map_lock)); -+ -+ pr_debug("[%s]: added resource %p (base addr %p, hdl %x, size %u, cache %u)\n", -+ __func__, resource, resource->res_base_mem, -+ resource->res_handle, resource->res_size, resource->res_cached); -+} -+ -+/* Locates a resource and acquire a reference on it. -+** The resource won't be deleted while there is a reference on it. -+*/ -+static struct SM_RESOURCE_T *vmcs_sm_acquire_resource(struct SM_PRIV_DATA_T -+ *private, -+ unsigned int res_guid) -+{ -+ struct SM_RESOURCE_T *resource, *ret = NULL; -+ -+ mutex_lock(&(sm_state->map_lock)); -+ -+ list_for_each_entry(resource, &private->resource_list, resource_list) { -+ if (resource->res_guid != res_guid) -+ continue; -+ -+ pr_debug("[%s]: located resource %p (guid: %x, base addr %p, hdl %x, size %u, cache %u)\n", -+ __func__, resource, resource->res_guid, -+ resource->res_base_mem, resource->res_handle, -+ resource->res_size, resource->res_cached); -+ resource->ref_count++; -+ ret = resource; -+ break; -+ } -+ -+ mutex_unlock(&(sm_state->map_lock)); -+ -+ return ret; -+} -+ -+/* Locates a resource and acquire a reference on it. -+** The resource won't be deleted while there is a reference on it. -+*/ -+static struct SM_RESOURCE_T *vmcs_sm_acquire_first_resource( -+ struct SM_PRIV_DATA_T *private) -+{ -+ struct SM_RESOURCE_T *resource, *ret = NULL; -+ -+ mutex_lock(&(sm_state->map_lock)); -+ -+ list_for_each_entry(resource, &private->resource_list, resource_list) { -+ pr_debug("[%s]: located resource %p (guid: %x, base addr %p, hdl %x, size %u, cache %u)\n", -+ __func__, resource, resource->res_guid, -+ resource->res_base_mem, resource->res_handle, -+ resource->res_size, resource->res_cached); -+ resource->ref_count++; -+ ret = resource; -+ break; -+ } -+ -+ mutex_unlock(&(sm_state->map_lock)); -+ -+ return ret; -+} -+ -+/* Locates a resource and acquire a reference on it. -+** The resource won't be deleted while there is a reference on it. -+*/ -+static struct SM_RESOURCE_T *vmcs_sm_acquire_global_resource(unsigned int -+ res_guid) -+{ -+ struct SM_RESOURCE_T *resource, *ret = NULL; -+ -+ mutex_lock(&(sm_state->map_lock)); -+ -+ list_for_each_entry(resource, &sm_state->resource_list, -+ global_resource_list) { -+ if (resource->res_guid != res_guid) -+ continue; -+ -+ pr_debug("[%s]: located resource %p (guid: %x, base addr %p, hdl %x, size %u, cache %u)\n", -+ __func__, resource, resource->res_guid, -+ resource->res_base_mem, resource->res_handle, -+ resource->res_size, resource->res_cached); -+ resource->ref_count++; -+ ret = resource; -+ break; -+ } -+ -+ mutex_unlock(&(sm_state->map_lock)); -+ -+ return ret; -+} -+ -+/* Release a previously acquired resource. -+** The resource will be deleted when its refcount reaches 0. -+*/ -+static void vmcs_sm_release_resource(struct SM_RESOURCE_T *resource, int force) -+{ -+ struct SM_PRIV_DATA_T *private = resource->private; -+ struct sm_mmap *map, *map_tmp; -+ struct SM_RESOURCE_T *res_tmp; -+ int ret; -+ -+ mutex_lock(&(sm_state->map_lock)); -+ -+ if (--resource->ref_count) { -+ if (force) -+ pr_err("[%s]: resource %p in use\n", __func__, resource); -+ -+ mutex_unlock(&(sm_state->map_lock)); -+ return; -+ } -+ -+ /* Time to free the resource. Start by removing it from the list */ -+ list_del(&resource->resource_list); -+ list_del(&resource->global_resource_list); -+ -+ /* Walk the global resource list, find out if the resource is used -+ * somewhere else. In which case we don't want to delete it. -+ */ -+ list_for_each_entry(res_tmp, &sm_state->resource_list, -+ global_resource_list) { -+ if (res_tmp->res_handle == resource->res_handle) { -+ resource->res_handle = 0; -+ break; -+ } -+ } -+ -+ mutex_unlock(&(sm_state->map_lock)); -+ -+ pr_debug("[%s]: freeing data - guid %x, hdl %x, base address %p\n", -+ __func__, resource->res_guid, resource->res_handle, -+ resource->res_base_mem); -+ resource->res_stats[FREE]++; -+ -+ /* Make sure the resource we're removing is unmapped first */ -+ if (resource->map_count && !list_empty(&resource->map_list)) { -+ down_write(¤t->mm->mmap_sem); -+ list_for_each_entry_safe(map, map_tmp, &resource->map_list, -+ resource_map_list) { -+ ret = -+ do_munmap(current->mm, map->res_addr, -+ resource->res_size); -+ if (ret) { -+ pr_err("[%s]: could not unmap resource %p\n", -+ __func__, resource); -+ } -+ } -+ up_write(¤t->mm->mmap_sem); -+ } -+ -+ /* Free up the videocore allocated resource. -+ */ -+ if (resource->res_handle) { -+ VC_SM_FREE_T free = { -+ resource->res_handle, resource->res_base_mem -+ }; -+ int status = vc_vchi_sm_free(sm_state->sm_handle, &free, -+ &private->int_trans_id); -+ if (status != 0 && status != -EINTR) { -+ pr_err("[%s]: failed to free memory on videocore (status: %u, trans_id: %u)\n", -+ __func__, status, private->int_trans_id); -+ resource->res_stats[FREE_FAIL]++; -+ ret = -EPERM; -+ } -+ } -+ -+ /* Free up the shared resource. -+ */ -+ if (resource->res_shared) -+ vmcs_sm_release_resource(resource->res_shared, 0); -+ -+ /* Free up the local resource tracking this allocation. -+ */ -+ vc_sm_resource_deceased(resource, force); -+ kfree(resource); -+} -+ -+/* Dump the map table for the driver. If process is -1, dumps the whole table, -+** if process is a valid pid (non -1) dump only the entries associated with the -+** pid of interest. -+*/ -+static void vmcs_sm_host_walk_map_per_pid(int pid) -+{ -+ struct sm_mmap *map = NULL; -+ -+ /* Make sure the device was started properly. -+ */ -+ if (sm_state == NULL) { -+ pr_err("[%s]: invalid device\n", __func__); -+ return; -+ } -+ -+ mutex_lock(&(sm_state->map_lock)); -+ -+ /* Log all applicable mapping(s). -+ */ -+ if (!list_empty(&sm_state->map_list)) { -+ list_for_each_entry(map, &sm_state->map_list, map_list) { -+ if (pid == -1 || map->res_pid == pid) { -+ pr_info("[%s]: tgid: %u - vc-hdl: %x, usr-hdl: %x, usr-addr: %lx\n", -+ __func__, map->res_pid, map->res_vc_hdl, -+ map->res_usr_hdl, map->res_addr); -+ } -+ } -+ } -+ -+ mutex_unlock(&(sm_state->map_lock)); -+ -+ return; -+} -+ -+/* Dump the allocation table from host side point of view. This only dumps the -+** data allocated for this process/device referenced by the file_data. -+*/ -+static void vmcs_sm_host_walk_alloc(struct SM_PRIV_DATA_T *file_data) -+{ -+ struct SM_RESOURCE_T *resource = NULL; -+ -+ /* Make sure the device was started properly. -+ */ -+ if ((sm_state == NULL) || (file_data == NULL)) { -+ pr_err("[%s]: invalid device\n", __func__); -+ return; -+ } -+ -+ mutex_lock(&(sm_state->map_lock)); -+ -+ if (!list_empty(&file_data->resource_list)) { -+ list_for_each_entry(resource, &file_data->resource_list, -+ resource_list) { -+ pr_info("[%s]: guid: %x - hdl: %x, vc-mem: %p, size: %u, cache: %u\n", -+ __func__, resource->res_guid, resource->res_handle, -+ resource->res_base_mem, resource->res_size, -+ resource->res_cached); -+ } -+ } -+ -+ mutex_unlock(&(sm_state->map_lock)); -+ -+ return; -+} -+ -+/* Create support for private data tracking. -+*/ -+static struct SM_PRIV_DATA_T *vc_sm_create_priv_data(pid_t id) -+{ -+ char alloc_name[32]; -+ struct SM_PRIV_DATA_T *file_data = NULL; -+ -+ /* Allocate private structure. */ -+ file_data = kzalloc(sizeof(*file_data), GFP_KERNEL); -+ -+ if (!file_data) { -+ pr_err("[%s]: cannot allocate file data\n", __func__); -+ goto out; -+ } -+ -+ snprintf(alloc_name, sizeof(alloc_name), "%d", id); -+ -+ INIT_LIST_HEAD(&file_data->resource_list); -+ file_data->pid = id; -+ file_data->dir_pid = debugfs_create_dir(alloc_name, -+ sm_state->dir_alloc); -+#if 0 -+ /* TODO: fix this to support querying statistics per pid */ -+ -+ if (IS_ERR_OR_NULL(file_data->dir_pid)) { -+ file_data->dir_pid = NULL; -+ } else { -+ struct dentry *dir_entry; -+ -+ dir_entry = debugfs_create_file(VC_SM_RESOURCES, S_IRUGO, -+ file_data->dir_pid, file_data, -+ vc_sm_debug_fs_fops); -+ -+ file_data->dir_res.dir_entry = dir_entry; -+ file_data->dir_res.priv_data = file_data; -+ file_data->dir_res.show = &vc_sm_alloc_show; -+ -+ dir_entry = debugfs_create_file(VC_SM_STATS, S_IRUGO, -+ file_data->dir_pid, file_data, -+ vc_sm_debug_fs_fops); -+ -+ file_data->dir_res.dir_entry = dir_entry; -+ file_data->dir_res.priv_data = file_data; -+ file_data->dir_res.show = &vc_sm_statistics_show; -+ } -+ pr_debug("[%s]: private data allocated %p\n", __func__, file_data); -+ -+#endif -+out: -+ return file_data; -+} -+ -+/* Open the device. Creates a private state to help track all allocation -+** associated with this device. -+*/ -+static int vc_sm_open(struct inode *inode, struct file *file) -+{ -+ int ret = 0; -+ -+ /* Make sure the device was started properly. -+ */ -+ if (!sm_state) { -+ pr_err("[%s]: invalid device\n", __func__); -+ ret = -EPERM; -+ goto out; -+ } -+ -+ file->private_data = vc_sm_create_priv_data(current->tgid); -+ if (file->private_data == NULL) { -+ pr_err("[%s]: failed to create data tracker\n", __func__); -+ -+ ret = -ENOMEM; -+ goto out; -+ } -+ -+out: -+ return ret; -+} -+ -+/* Close the device. Free up all resources still associated with this device -+** at the time. -+*/ -+static int vc_sm_release(struct inode *inode, struct file *file) -+{ -+ struct SM_PRIV_DATA_T *file_data = -+ (struct SM_PRIV_DATA_T *)file->private_data; -+ struct SM_RESOURCE_T *resource; -+ int ret = 0; -+ -+ /* Make sure the device was started properly. -+ */ -+ if (sm_state == NULL || file_data == NULL) { -+ pr_err("[%s]: invalid device\n", __func__); -+ ret = -EPERM; -+ goto out; -+ } -+ -+ pr_debug("[%s]: using private data %p\n", __func__, file_data); -+ -+ if (file_data->restart_sys == -EINTR) { -+ VC_SM_ACTION_CLEAN_T action_clean; -+ -+ pr_debug("[%s]: releasing following EINTR on %u (trans_id: %u) (likely due to signal)...\n", -+ __func__, file_data->int_action, -+ file_data->int_trans_id); -+ -+ action_clean.res_action = file_data->int_action; -+ action_clean.action_trans_id = file_data->int_trans_id; -+ -+ vc_vchi_sm_clean_up(sm_state->sm_handle, &action_clean); -+ } -+ -+ while ((resource = vmcs_sm_acquire_first_resource(file_data)) != NULL) { -+ vmcs_sm_release_resource(resource, 0); -+ vmcs_sm_release_resource(resource, 1); -+ } -+ -+ /* Remove the corresponding proc entry. */ -+ debugfs_remove_recursive(file_data->dir_pid); -+ -+ /* Terminate the private data. -+ */ -+ kfree(file_data); -+ -+out: -+ return ret; -+} -+ -+static void vcsm_vma_open(struct vm_area_struct *vma) -+{ -+ struct sm_mmap *map = (struct sm_mmap *)vma->vm_private_data; -+ -+ pr_debug("[%s]: virt %lx-%lx, pid %i, pfn %i\n", -+ __func__, vma->vm_start, vma->vm_end, (int)current->tgid, -+ (int)vma->vm_pgoff); -+ -+ map->ref_count++; -+} -+ -+static void vcsm_vma_close(struct vm_area_struct *vma) -+{ -+ struct sm_mmap *map = (struct sm_mmap *)vma->vm_private_data; -+ -+ pr_debug("[%s]: virt %lx-%lx, pid %i, pfn %i\n", -+ __func__, vma->vm_start, vma->vm_end, (int)current->tgid, -+ (int)vma->vm_pgoff); -+ -+ map->ref_count--; -+ -+ /* Remove from the map table. -+ */ -+ if (map->ref_count == 0) -+ vmcs_sm_remove_map(sm_state, map->resource, map); -+} -+ -+static int vcsm_vma_fault(struct vm_area_struct *vma, struct vm_fault *vmf) -+{ -+ struct sm_mmap *map = (struct sm_mmap *)vma->vm_private_data; -+ struct SM_RESOURCE_T *resource = map->resource; -+ pgoff_t page_offset; -+ unsigned long pfn; -+ int ret = 0; -+ -+ /* Lock the resource if necessary. -+ */ -+ if (!resource->lock_count) { -+ VC_SM_LOCK_UNLOCK_T lock_unlock; -+ VC_SM_LOCK_RESULT_T lock_result; -+ int status; -+ -+ lock_unlock.res_handle = resource->res_handle; -+ lock_unlock.res_mem = resource->res_base_mem; -+ -+ pr_debug("[%s]: attempt to lock data - hdl %x, base address %p\n", -+ __func__, lock_unlock.res_handle, lock_unlock.res_mem); -+ -+ /* Lock the videocore allocated resource. -+ */ -+ status = vc_vchi_sm_lock(sm_state->sm_handle, -+ &lock_unlock, &lock_result, 0); -+ if ((status != 0) || -+ ((status == 0) && (lock_result.res_mem == NULL))) { -+ pr_err("[%s]: failed to lock memory on videocore (status: %u)\n", -+ __func__, status); -+ resource->res_stats[LOCK_FAIL]++; -+ return VM_FAULT_SIGBUS; -+ } -+ -+ pfn = vcaddr_to_pfn((unsigned long)resource->res_base_mem); -+ outer_inv_range(__pfn_to_phys(pfn), -+ __pfn_to_phys(pfn) + resource->res_size); -+ -+ resource->res_stats[LOCK]++; -+ resource->lock_count++; -+ -+ /* Keep track of the new base memory. -+ */ -+ if ((lock_result.res_mem != NULL) && -+ (lock_result.res_old_mem != NULL) && -+ (lock_result.res_mem != lock_result.res_old_mem)) { -+ resource->res_base_mem = lock_result.res_mem; -+ } -+ } -+ -+ /* We don't use vmf->pgoff since that has the fake offset */ -+ page_offset = ((unsigned long)vmf->virtual_address - vma->vm_start); -+ pfn = (uint32_t)resource->res_base_mem & 0x3FFFFFFF; -+ pfn += mm_vc_mem_phys_addr; -+ pfn += page_offset; -+ pfn >>= PAGE_SHIFT; -+ -+ /* Finally, remap it */ -+ ret = vm_insert_pfn(vma, (unsigned long)vmf->virtual_address, pfn); -+ -+ switch (ret) { -+ case 0: -+ case -ERESTARTSYS: -+ return VM_FAULT_NOPAGE; -+ case -ENOMEM: -+ case -EAGAIN: -+ return VM_FAULT_OOM; -+ default: -+ return VM_FAULT_SIGBUS; -+ } -+} -+ -+static struct vm_operations_struct vcsm_vm_ops = { -+ .open = vcsm_vma_open, -+ .close = vcsm_vma_close, -+ .fault = vcsm_vma_fault, -+}; -+ -+/* Walks a VMA and clean each valid page from the cache */ -+static void vcsm_vma_cache_clean_page_range(unsigned long addr, -+ unsigned long end) -+{ -+ pgd_t *pgd; -+ pud_t *pud; -+ pmd_t *pmd; -+ pte_t *pte; -+ unsigned long pgd_next, pud_next, pmd_next; -+ -+ if (addr >= end) -+ return; -+ -+ /* Walk PGD */ -+ pgd = pgd_offset(current->mm, addr); -+ do { -+ pgd_next = pgd_addr_end(addr, end); -+ -+ if (pgd_none(*pgd) || pgd_bad(*pgd)) -+ continue; -+ -+ /* Walk PUD */ -+ pud = pud_offset(pgd, addr); -+ do { -+ pud_next = pud_addr_end(addr, pgd_next); -+ if (pud_none(*pud) || pud_bad(*pud)) -+ continue; -+ -+ /* Walk PMD */ -+ pmd = pmd_offset(pud, addr); -+ do { -+ pmd_next = pmd_addr_end(addr, pud_next); -+ if (pmd_none(*pmd) || pmd_bad(*pmd)) -+ continue; -+ -+ /* Walk PTE */ -+ pte = pte_offset_map(pmd, addr); -+ do { -+ if (pte_none(*pte) -+ || !pte_present(*pte)) -+ continue; -+ -+ /* Clean + invalidate */ -+ dmac_flush_range((const void *) addr, -+ (const void *) -+ (addr + PAGE_SIZE)); -+ -+ } while (pte++, addr += -+ PAGE_SIZE, addr != pmd_next); -+ pte_unmap(pte); -+ -+ } while (pmd++, addr = pmd_next, addr != pud_next); -+ -+ } while (pud++, addr = pud_next, addr != pgd_next); -+ } while (pgd++, addr = pgd_next, addr != end); -+} -+ -+/* Map an allocated data into something that the user space. -+*/ -+static int vc_sm_mmap(struct file *file, struct vm_area_struct *vma) -+{ -+ int ret = 0; -+ struct SM_PRIV_DATA_T *file_data = -+ (struct SM_PRIV_DATA_T *)file->private_data; -+ struct SM_RESOURCE_T *resource = NULL; -+ struct sm_mmap *map = NULL; -+ -+ /* Make sure the device was started properly. -+ */ -+ if ((sm_state == NULL) || (file_data == NULL)) { -+ pr_err("[%s]: invalid device\n", __func__); -+ return -EPERM; -+ } -+ -+ pr_debug("[%s]: private data %p, guid %x\n", __func__, file_data, -+ ((unsigned int)vma->vm_pgoff << PAGE_SHIFT)); -+ -+ /* We lookup to make sure that the data we are being asked to mmap is -+ ** something that we allocated. -+ ** -+ ** We use the offset information as the key to tell us which resource -+ ** we are mapping. -+ */ -+ resource = vmcs_sm_acquire_resource(file_data, -+ ((unsigned int)vma->vm_pgoff << -+ PAGE_SHIFT)); -+ if (resource == NULL) { -+ pr_err("[%s]: failed to locate resource for guid %x\n", __func__, -+ ((unsigned int)vma->vm_pgoff << PAGE_SHIFT)); -+ return -ENOMEM; -+ } -+ -+ pr_debug("[%s]: guid %x, tgid %u, %u, %u\n", -+ __func__, resource->res_guid, current->tgid, resource->pid, -+ file_data->pid); -+ -+ /* Check permissions. -+ */ -+ if (resource->pid && (resource->pid != current->tgid)) { -+ pr_err("[%s]: current tgid %u != %u owner\n", -+ __func__, current->tgid, resource->pid); -+ ret = -EPERM; -+ goto error; -+ } -+ -+ /* Verify that what we are asked to mmap is proper. -+ */ -+ if (resource->res_size != (unsigned int)(vma->vm_end - vma->vm_start)) { -+ pr_err("[%s]: size inconsistency (resource: %u - mmap: %u)\n", -+ __func__, -+ resource->res_size, -+ (unsigned int)(vma->vm_end - vma->vm_start)); -+ -+ ret = -EINVAL; -+ goto error; -+ } -+ -+ /* Keep track of the tuple in the global resource list such that one -+ * can do a mapping lookup for address/memory handle. -+ */ -+ map = kzalloc(sizeof(*map), GFP_KERNEL); -+ if (map == NULL) { -+ pr_err("[%s]: failed to allocate global tracking resource\n", -+ __func__); -+ ret = -ENOMEM; -+ goto error; -+ } -+ -+ map->res_pid = current->tgid; -+ map->res_vc_hdl = resource->res_handle; -+ map->res_usr_hdl = resource->res_guid; -+ map->res_addr = (long unsigned int)vma->vm_start; -+ map->resource = resource; -+ map->vma = vma; -+ vmcs_sm_add_map(sm_state, resource, map); -+ -+ /* We are not actually mapping the pages, we just provide a fault -+ ** handler to allow pages to be mapped when accessed -+ */ -+ vma->vm_flags |= -+ VM_IO | VM_PFNMAP | VM_DONTCOPY | VM_DONTEXPAND; -+ vma->vm_ops = &vcsm_vm_ops; -+ vma->vm_private_data = map; -+ -+ /* vm_pgoff is the first PFN of the mapped memory */ -+ vma->vm_pgoff = (unsigned long)resource->res_base_mem & 0x3FFFFFFF; -+ vma->vm_pgoff += mm_vc_mem_phys_addr; -+ vma->vm_pgoff >>= PAGE_SHIFT; -+ -+ if ((resource->res_cached == VMCS_SM_CACHE_NONE) || -+ (resource->res_cached == VMCS_SM_CACHE_VC)) { -+ /* Allocated non host cached memory, honour it. -+ */ -+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); -+ } -+ -+ pr_debug("[%s]: resource %p (guid %x) - cnt %u, base address %p, handle %x, size %u (%u), cache %u\n", -+ __func__, -+ resource, resource->res_guid, resource->lock_count, -+ resource->res_base_mem, resource->res_handle, -+ resource->res_size, (unsigned int)(vma->vm_end - vma->vm_start), -+ resource->res_cached); -+ -+ pr_debug("[%s]: resource %p (base address %p, handle %x) - map-count %d, usr-addr %x\n", -+ __func__, resource, resource->res_base_mem, -+ resource->res_handle, resource->map_count, -+ (unsigned int)vma->vm_start); -+ -+ vcsm_vma_open(vma); -+ resource->res_stats[MAP]++; -+ vmcs_sm_release_resource(resource, 0); -+ return 0; -+ -+error: -+ resource->res_stats[MAP_FAIL]++; -+ vmcs_sm_release_resource(resource, 0); -+ return ret; -+} -+ -+/* Allocate a shared memory handle and block. -+*/ -+int vc_sm_ioctl_alloc(struct SM_PRIV_DATA_T *private, -+ struct vmcs_sm_ioctl_alloc *ioparam) -+{ -+ int ret = 0; -+ int status; -+ struct SM_RESOURCE_T *resource; -+ VC_SM_ALLOC_T alloc = { 0 }; -+ VC_SM_ALLOC_RESULT_T result = { 0 }; -+ -+ /* Setup our allocation parameters */ -+ alloc.type = ((ioparam->cached == VMCS_SM_CACHE_VC) -+ || (ioparam->cached == -+ VMCS_SM_CACHE_BOTH)) ? VC_SM_ALLOC_CACHED : -+ VC_SM_ALLOC_NON_CACHED; -+ alloc.base_unit = ioparam->size; -+ alloc.num_unit = ioparam->num; -+ alloc.allocator = current->tgid; -+ /* Align to kernel page size */ -+ alloc.alignement = 4096; -+ /* Align the size to the kernel page size */ -+ alloc.base_unit = -+ (alloc.base_unit + alloc.alignement - 1) & ~(alloc.alignement - 1); -+ if (*ioparam->name) { -+ memcpy(alloc.name, ioparam->name, sizeof(alloc.name) - 1); -+ } else { -+ memcpy(alloc.name, VMCS_SM_RESOURCE_NAME_DEFAULT, -+ sizeof(VMCS_SM_RESOURCE_NAME_DEFAULT)); -+ } -+ -+ pr_debug("[%s]: attempt to allocate \"%s\" data - type %u, base %u (%u), num %u, alignement %u\n", -+ __func__, alloc.name, alloc.type, ioparam->size, -+ alloc.base_unit, alloc.num_unit, alloc.alignement); -+ -+ /* Allocate local resource to track this allocation. -+ */ -+ resource = kzalloc(sizeof(*resource), GFP_KERNEL); -+ if (!resource) { -+ ret = -ENOMEM; -+ goto error; -+ } -+ INIT_LIST_HEAD(&resource->map_list); -+ resource->ref_count++; -+ resource->pid = current->tgid; -+ -+ /* Allocate the videocore resource. -+ */ -+ status = vc_vchi_sm_alloc(sm_state->sm_handle, &alloc, &result, -+ &private->int_trans_id); -+ if (status == -EINTR) { -+ pr_debug("[%s]: requesting allocate memory action restart (trans_id: %u)\n", -+ __func__, private->int_trans_id); -+ ret = -ERESTARTSYS; -+ private->restart_sys = -EINTR; -+ private->int_action = VC_SM_MSG_TYPE_ALLOC; -+ goto error; -+ } else if (status != 0 || (status == 0 && result.res_mem == NULL)) { -+ pr_err("[%s]: failed to allocate memory on videocore (status: %u, trans_id: %u)\n", -+ __func__, status, private->int_trans_id); -+ ret = -ENOMEM; -+ resource->res_stats[ALLOC_FAIL]++; -+ goto error; -+ } -+ -+ /* Keep track of the resource we created. -+ */ -+ resource->private = private; -+ resource->res_handle = result.res_handle; -+ resource->res_base_mem = result.res_mem; -+ resource->res_size = alloc.base_unit * alloc.num_unit; -+ resource->res_cached = ioparam->cached; -+ -+ /* Kernel/user GUID. This global identifier is used for mmap'ing the -+ * allocated region from user space, it is passed as the mmap'ing -+ * offset, we use it to 'hide' the videocore handle/address. -+ */ -+ mutex_lock(&sm_state->lock); -+ resource->res_guid = ++sm_state->guid; -+ mutex_unlock(&sm_state->lock); -+ resource->res_guid <<= PAGE_SHIFT; -+ -+ vmcs_sm_add_resource(private, resource); -+ -+ pr_debug("[%s]: allocated data - guid %x, hdl %x, base address %p, size %d, cache %d\n", -+ __func__, resource->res_guid, resource->res_handle, -+ resource->res_base_mem, resource->res_size, -+ resource->res_cached); -+ -+ /* We're done */ -+ resource->res_stats[ALLOC]++; -+ ioparam->handle = resource->res_guid; -+ return 0; -+ -+error: -+ pr_err("[%s]: failed to allocate \"%s\" data (%i) - type %u, base %u (%u), num %u, alignment %u\n", -+ __func__, alloc.name, ret, alloc.type, ioparam->size, -+ alloc.base_unit, alloc.num_unit, alloc.alignement); -+ if (resource != NULL) { -+ vc_sm_resource_deceased(resource, 1); -+ kfree(resource); -+ } -+ return ret; -+} -+ -+/* Share an allocate memory handle and block. -+*/ -+int vc_sm_ioctl_alloc_share(struct SM_PRIV_DATA_T *private, -+ struct vmcs_sm_ioctl_alloc_share *ioparam) -+{ -+ struct SM_RESOURCE_T *resource, *shared_resource; -+ int ret = 0; -+ -+ pr_debug("[%s]: attempt to share resource %u\n", __func__, -+ ioparam->handle); -+ -+ shared_resource = vmcs_sm_acquire_global_resource(ioparam->handle); -+ if (shared_resource == NULL) { -+ ret = -ENOMEM; -+ goto error; -+ } -+ -+ /* Allocate local resource to track this allocation. -+ */ -+ resource = kzalloc(sizeof(*resource), GFP_KERNEL); -+ if (resource == NULL) { -+ pr_err("[%s]: failed to allocate local tracking resource\n", -+ __func__); -+ ret = -ENOMEM; -+ goto error; -+ } -+ INIT_LIST_HEAD(&resource->map_list); -+ resource->ref_count++; -+ resource->pid = current->tgid; -+ -+ /* Keep track of the resource we created. -+ */ -+ resource->private = private; -+ resource->res_handle = shared_resource->res_handle; -+ resource->res_base_mem = shared_resource->res_base_mem; -+ resource->res_size = shared_resource->res_size; -+ resource->res_cached = shared_resource->res_cached; -+ resource->res_shared = shared_resource; -+ -+ mutex_lock(&sm_state->lock); -+ resource->res_guid = ++sm_state->guid; -+ mutex_unlock(&sm_state->lock); -+ resource->res_guid <<= PAGE_SHIFT; -+ -+ vmcs_sm_add_resource(private, resource); -+ -+ pr_debug("[%s]: allocated data - guid %x, hdl %x, base address %p, size %d, cache %d\n", -+ __func__, resource->res_guid, resource->res_handle, -+ resource->res_base_mem, resource->res_size, -+ resource->res_cached); -+ -+ /* We're done */ -+ resource->res_stats[ALLOC]++; -+ ioparam->handle = resource->res_guid; -+ ioparam->size = resource->res_size; -+ return 0; -+ -+error: -+ pr_err("[%s]: failed to share %u\n", __func__, ioparam->handle); -+ if (shared_resource != NULL) -+ vmcs_sm_release_resource(shared_resource, 0); -+ -+ return ret; -+} -+ -+/* Free a previously allocated shared memory handle and block. -+*/ -+static int vc_sm_ioctl_free(struct SM_PRIV_DATA_T *private, -+ struct vmcs_sm_ioctl_free *ioparam) -+{ -+ struct SM_RESOURCE_T *resource = -+ vmcs_sm_acquire_resource(private, ioparam->handle); -+ -+ if (resource == NULL) { -+ pr_err("[%s]: resource for guid %u does not exist\n", __func__, -+ ioparam->handle); -+ return -EINVAL; -+ } -+ -+ /* Check permissions. -+ */ -+ if (resource->pid && (resource->pid != current->tgid)) { -+ pr_err("[%s]: current tgid %u != %u owner\n", -+ __func__, current->tgid, resource->pid); -+ vmcs_sm_release_resource(resource, 0); -+ return -EPERM; -+ } -+ -+ vmcs_sm_release_resource(resource, 0); -+ vmcs_sm_release_resource(resource, 0); -+ return 0; -+} -+ -+/* Resize a previously allocated shared memory handle and block. -+*/ -+static int vc_sm_ioctl_resize(struct SM_PRIV_DATA_T *private, -+ struct vmcs_sm_ioctl_resize *ioparam) -+{ -+ int ret = 0; -+ int status; -+ VC_SM_RESIZE_T resize; -+ struct SM_RESOURCE_T *resource; -+ -+ /* Locate resource from GUID. -+ */ -+ resource = vmcs_sm_acquire_resource(private, ioparam->handle); -+ if (!resource) { -+ pr_err("[%s]: failed resource - guid %x\n", -+ __func__, ioparam->handle); -+ ret = -EFAULT; -+ goto error; -+ } -+ -+ /* If the resource is locked, its reference count will be not NULL, -+ ** in which case we will not be allowed to resize it anyways, so -+ ** reject the attempt here. -+ */ -+ if (resource->lock_count != 0) { -+ pr_err("[%s]: cannot resize - guid %x, ref-cnt %d\n", -+ __func__, ioparam->handle, resource->lock_count); -+ ret = -EFAULT; -+ goto error; -+ } -+ -+ /* Check permissions. -+ */ -+ if (resource->pid && (resource->pid != current->tgid)) { -+ pr_err("[%s]: current tgid %u != %u owner\n", __func__, -+ current->tgid, resource->pid); -+ ret = -EPERM; -+ goto error; -+ } -+ -+ if (resource->map_count != 0) { -+ pr_err("[%s]: cannot resize - guid %x, ref-cnt %d\n", -+ __func__, ioparam->handle, resource->map_count); -+ ret = -EFAULT; -+ goto error; -+ } -+ -+ resize.res_handle = resource->res_handle; -+ resize.res_mem = resource->res_base_mem; -+ resize.res_new_size = ioparam->new_size; -+ -+ pr_debug("[%s]: attempt to resize data - guid %x, hdl %x, base address %p\n", -+ __func__, ioparam->handle, resize.res_handle, resize.res_mem); -+ -+ /* Resize the videocore allocated resource. -+ */ -+ status = vc_vchi_sm_resize(sm_state->sm_handle, &resize, -+ &private->int_trans_id); -+ if (status == -EINTR) { -+ pr_debug("[%s]: requesting resize memory action restart (trans_id: %u)\n", -+ __func__, private->int_trans_id); -+ ret = -ERESTARTSYS; -+ private->restart_sys = -EINTR; -+ private->int_action = VC_SM_MSG_TYPE_RESIZE; -+ goto error; -+ } else if (status != 0) { -+ pr_err("[%s]: failed to resize memory on videocore (status: %u, trans_id: %u)\n", -+ __func__, status, private->int_trans_id); -+ ret = -EPERM; -+ goto error; -+ } -+ -+ pr_debug("[%s]: success to resize data - hdl %x, size %d -> %d\n", -+ __func__, resize.res_handle, resource->res_size, -+ resize.res_new_size); -+ -+ /* Successfully resized, save the information and inform the user. -+ */ -+ ioparam->old_size = resource->res_size; -+ resource->res_size = resize.res_new_size; -+ -+error: -+ if (resource) -+ vmcs_sm_release_resource(resource, 0); -+ -+ return ret; -+} -+ -+/* Lock a previously allocated shared memory handle and block. -+*/ -+static int vc_sm_ioctl_lock(struct SM_PRIV_DATA_T *private, -+ struct vmcs_sm_ioctl_lock_unlock *ioparam, -+ int change_cache, enum vmcs_sm_cache_e cache_type, -+ unsigned int vc_addr) -+{ -+ int status; -+ VC_SM_LOCK_UNLOCK_T lock; -+ VC_SM_LOCK_RESULT_T result; -+ struct SM_RESOURCE_T *resource; -+ int ret = 0; -+ struct sm_mmap *map, *map_tmp; -+ long unsigned int phys_addr; -+ -+ map = NULL; -+ -+ /* Locate resource from GUID. -+ */ -+ resource = vmcs_sm_acquire_resource(private, ioparam->handle); -+ if (resource == NULL) { -+ ret = -EINVAL; -+ goto error; -+ } -+ -+ /* Check permissions. -+ */ -+ if (resource->pid && (resource->pid != current->tgid)) { -+ pr_err("[%s]: current tgid %u != %u owner\n", __func__, -+ current->tgid, resource->pid); -+ ret = -EPERM; -+ goto error; -+ } -+ -+ lock.res_handle = resource->res_handle; -+ lock.res_mem = resource->res_base_mem; -+ -+ /* Take the lock and get the address to be mapped. -+ */ -+ if (vc_addr == 0) { -+ pr_debug("[%s]: attempt to lock data - guid %x, hdl %x, base address %p\n", -+ __func__, ioparam->handle, lock.res_handle, -+ lock.res_mem); -+ -+ /* Lock the videocore allocated resource. -+ */ -+ status = vc_vchi_sm_lock(sm_state->sm_handle, &lock, &result, -+ &private->int_trans_id); -+ if (status == -EINTR) { -+ pr_debug("[%s]: requesting lock memory action restart (trans_id: %u)\n", -+ __func__, private->int_trans_id); -+ ret = -ERESTARTSYS; -+ private->restart_sys = -EINTR; -+ private->int_action = VC_SM_MSG_TYPE_LOCK; -+ goto error; -+ } else if (status != 0 || -+ (status == 0 && result.res_mem == NULL)) { -+ pr_err("[%s]: failed to lock memory on videocore (status: %u, trans_id: %u)\n", -+ __func__, status, private->int_trans_id); -+ ret = -EPERM; -+ resource->res_stats[LOCK_FAIL]++; -+ goto error; -+ } -+ -+ pr_debug("[%s]: succeed to lock data - hdl %x, base address %p (%p), ref-cnt %d\n", -+ __func__, lock.res_handle, result.res_mem, -+ lock.res_mem, resource->lock_count); -+ } -+ /* Lock assumed taken already, address to be mapped is known. -+ */ -+ else -+ resource->res_base_mem = (void *)vc_addr; -+ -+ resource->res_stats[LOCK]++; -+ resource->lock_count++; -+ -+ /* Keep track of the new base memory allocation if it has changed. -+ */ -+ if ((vc_addr == 0) && -+ (result.res_mem != NULL) && -+ (result.res_old_mem != NULL) && -+ (result.res_mem != result.res_old_mem)) { -+ resource->res_base_mem = result.res_mem; -+ -+ /* Kernel allocated resources. -+ */ -+ if (resource->pid == 0) { -+ if (!list_empty(&resource->map_list)) { -+ list_for_each_entry_safe(map, map_tmp, -+ &resource->map_list, -+ resource_map_list) { -+ if (map->res_addr) { -+ iounmap((void *)map->res_addr); -+ map->res_addr = 0; -+ -+ vmcs_sm_remove_map(sm_state, -+ map->resource, -+ map); -+ break; -+ } -+ } -+ } -+ } -+ } -+ -+ if (change_cache) -+ resource->res_cached = cache_type; -+ -+ if (resource->map_count) { -+ ioparam->addr = -+ vmcs_sm_usr_address_from_pid_and_usr_handle( -+ current->tgid, ioparam->handle); -+ -+ pr_debug("[%s] map_count %d private->pid %d current->tgid %d hnd %x addr %u\n", -+ __func__, resource->map_count, private->pid, -+ current->tgid, ioparam->handle, ioparam->addr); -+ } else { -+ /* Kernel allocated resources. -+ */ -+ if (resource->pid == 0) { -+ pr_debug("[%s]: attempt mapping kernel resource - guid %x, hdl %x\n", -+ __func__, ioparam->handle, lock.res_handle); -+ -+ ioparam->addr = 0; -+ -+ map = kzalloc(sizeof(*map), GFP_KERNEL); -+ if (map == NULL) { -+ pr_err("[%s]: failed allocating tracker\n", -+ __func__); -+ ret = -ENOMEM; -+ goto error; -+ } else { -+ phys_addr = (uint32_t)resource->res_base_mem & -+ 0x3FFFFFFF; -+ phys_addr += mm_vc_mem_phys_addr; -+ if (resource->res_cached -+ == VMCS_SM_CACHE_HOST) { -+ ioparam->addr = (long unsigned int) -+ /* TODO - make cached work */ -+ ioremap_nocache(phys_addr, -+ resource->res_size); -+ -+ pr_debug("[%s]: mapping kernel - guid %x, hdl %x - cached mapping %u\n", -+ __func__, ioparam->handle, -+ lock.res_handle, ioparam->addr); -+ } else { -+ ioparam->addr = (long unsigned int) -+ ioremap_nocache(phys_addr, -+ resource->res_size); -+ -+ pr_debug("[%s]: mapping kernel- guid %x, hdl %x - non cached mapping %u\n", -+ __func__, ioparam->handle, -+ lock.res_handle, ioparam->addr); -+ } -+ -+ map->res_pid = 0; -+ map->res_vc_hdl = resource->res_handle; -+ map->res_usr_hdl = resource->res_guid; -+ map->res_addr = ioparam->addr; -+ map->resource = resource; -+ map->vma = NULL; -+ -+ vmcs_sm_add_map(sm_state, resource, map); -+ } -+ } else -+ ioparam->addr = 0; -+ } -+ -+error: -+ if (resource) -+ vmcs_sm_release_resource(resource, 0); -+ -+ return ret; -+} -+ -+/* Unlock a previously allocated shared memory handle and block. -+*/ -+static int vc_sm_ioctl_unlock(struct SM_PRIV_DATA_T *private, -+ struct vmcs_sm_ioctl_lock_unlock *ioparam, -+ int flush, int wait_reply, int no_vc_unlock) -+{ -+ int status; -+ VC_SM_LOCK_UNLOCK_T unlock; -+ struct sm_mmap *map, *map_tmp; -+ struct SM_RESOURCE_T *resource; -+ int ret = 0; -+ -+ map = NULL; -+ -+ /* Locate resource from GUID. -+ */ -+ resource = vmcs_sm_acquire_resource(private, ioparam->handle); -+ if (resource == NULL) { -+ ret = -EINVAL; -+ goto error; -+ } -+ -+ /* Check permissions. -+ */ -+ if (resource->pid && (resource->pid != current->tgid)) { -+ pr_err("[%s]: current tgid %u != %u owner\n", -+ __func__, current->tgid, resource->pid); -+ ret = -EPERM; -+ goto error; -+ } -+ -+ unlock.res_handle = resource->res_handle; -+ unlock.res_mem = resource->res_base_mem; -+ -+ pr_debug("[%s]: attempt to unlock data - guid %x, hdl %x, base address %p\n", -+ __func__, ioparam->handle, unlock.res_handle, unlock.res_mem); -+ -+ /* User space allocated resources. -+ */ -+ if (resource->pid) { -+ /* Flush if requested */ -+ if (resource->res_cached && flush) { -+ dma_addr_t phys_addr = 0; -+ resource->res_stats[FLUSH]++; -+ -+ phys_addr = -+ (dma_addr_t)((uint32_t)resource->res_base_mem & -+ 0x3FFFFFFF); -+ phys_addr += (dma_addr_t)mm_vc_mem_phys_addr; -+ -+ /* L1 cache flush */ -+ down_read(¤t->mm->mmap_sem); -+ list_for_each_entry(map, &resource->map_list, -+ resource_map_list) { -+ if (map->vma) { -+ unsigned long start; -+ unsigned long end; -+ start = map->vma->vm_start; -+ end = map->vma->vm_end; -+ -+ vcsm_vma_cache_clean_page_range( -+ start, end); -+ } -+ } -+ up_read(¤t->mm->mmap_sem); -+ -+ /* L2 cache flush */ -+ outer_clean_range(phys_addr, -+ phys_addr + -+ (size_t) resource->res_size); -+ } -+ -+ /* We need to zap all the vmas associated with this resource */ -+ if (resource->lock_count == 1) { -+ down_read(¤t->mm->mmap_sem); -+ list_for_each_entry(map, &resource->map_list, -+ resource_map_list) { -+ if (map->vma) { -+ zap_vma_ptes(map->vma, -+ map->vma->vm_start, -+ map->vma->vm_end - -+ map->vma->vm_start); -+ } -+ } -+ up_read(¤t->mm->mmap_sem); -+ } -+ } -+ /* Kernel allocated resources. */ -+ else { -+ /* Global + Taken in this context */ -+ if (resource->ref_count == 2) { -+ if (!list_empty(&resource->map_list)) { -+ list_for_each_entry_safe(map, map_tmp, -+ &resource->map_list, -+ resource_map_list) { -+ if (map->res_addr) { -+ if (flush && -+ (resource->res_cached == -+ VMCS_SM_CACHE_HOST)) { -+ long unsigned int -+ phys_addr; -+ phys_addr = (uint32_t) -+ resource->res_base_mem & 0x3FFFFFFF; -+ phys_addr += -+ mm_vc_mem_phys_addr; -+ -+ /* L1 cache flush */ -+ dmac_flush_range((const -+ void -+ *) -+ map->res_addr, (const void *) -+ (map->res_addr + resource->res_size)); -+ -+ /* L2 cache flush */ -+ outer_clean_range -+ (phys_addr, -+ phys_addr + -+ (size_t) -+ resource->res_size); -+ } -+ -+ iounmap((void *)map->res_addr); -+ map->res_addr = 0; -+ -+ vmcs_sm_remove_map(sm_state, -+ map->resource, -+ map); -+ break; -+ } -+ } -+ } -+ } -+ } -+ -+ if (resource->lock_count) { -+ /* Bypass the videocore unlock. -+ */ -+ if (no_vc_unlock) -+ status = 0; -+ /* Unlock the videocore allocated resource. -+ */ -+ else { -+ status = -+ vc_vchi_sm_unlock(sm_state->sm_handle, &unlock, -+ &private->int_trans_id, -+ wait_reply); -+ if (status == -EINTR) { -+ pr_debug("[%s]: requesting unlock memory action restart (trans_id: %u)\n", -+ __func__, private->int_trans_id); -+ -+ ret = -ERESTARTSYS; -+ resource->res_stats[UNLOCK]--; -+ private->restart_sys = -EINTR; -+ private->int_action = VC_SM_MSG_TYPE_UNLOCK; -+ goto error; -+ } else if (status != 0) { -+ pr_err("[%s]: failed to unlock vc mem (status: %u, trans_id: %u)\n", -+ __func__, status, private->int_trans_id); -+ -+ ret = -EPERM; -+ resource->res_stats[UNLOCK_FAIL]++; -+ goto error; -+ } -+ } -+ -+ resource->res_stats[UNLOCK]++; -+ resource->lock_count--; -+ } -+ -+ pr_debug("[%s]: success to unlock data - hdl %x, base address %p, ref-cnt %d\n", -+ __func__, unlock.res_handle, unlock.res_mem, -+ resource->lock_count); -+ -+error: -+ if (resource) -+ vmcs_sm_release_resource(resource, 0); -+ -+ return ret; -+} -+ -+/* Handle control from host. */ -+static long vc_sm_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ int ret = 0; -+ unsigned int cmdnr = _IOC_NR(cmd); -+ struct SM_PRIV_DATA_T *file_data = -+ (struct SM_PRIV_DATA_T *)file->private_data; -+ struct SM_RESOURCE_T *resource = NULL; -+ -+ /* Validate we can work with this device. */ -+ if ((sm_state == NULL) || (file_data == NULL)) { -+ pr_err("[%s]: invalid device\n", __func__); -+ ret = -EPERM; -+ goto out; -+ } -+ -+ pr_debug("[%s]: cmd %x tgid %u, owner %u\n", __func__, cmdnr, -+ current->tgid, file_data->pid); -+ -+ /* Action is a re-post of a previously interrupted action? */ -+ if (file_data->restart_sys == -EINTR) { -+ VC_SM_ACTION_CLEAN_T action_clean; -+ -+ pr_debug("[%s]: clean up of action %u (trans_id: %u) following EINTR\n", -+ __func__, file_data->int_action, -+ file_data->int_trans_id); -+ -+ action_clean.res_action = file_data->int_action; -+ action_clean.action_trans_id = file_data->int_trans_id; -+ -+ vc_vchi_sm_clean_up(sm_state->sm_handle, &action_clean); -+ -+ file_data->restart_sys = 0; -+ } -+ -+ /* Now process the command. -+ */ -+ switch (cmdnr) { -+ /* New memory allocation. -+ */ -+ case VMCS_SM_CMD_ALLOC: -+ { -+ struct vmcs_sm_ioctl_alloc ioparam; -+ -+ /* Get the parameter data. -+ */ -+ if (copy_from_user -+ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ ret = vc_sm_ioctl_alloc(file_data, &ioparam); -+ if (!ret && -+ (copy_to_user((void *)arg, -+ &ioparam, sizeof(ioparam)) != 0)) { -+ struct vmcs_sm_ioctl_free freeparam = { -+ ioparam.handle -+ }; -+ pr_err("[%s]: failed to copy-to-user for cmd %x\n", -+ __func__, cmdnr); -+ vc_sm_ioctl_free(file_data, &freeparam); -+ ret = -EFAULT; -+ } -+ -+ /* Done. -+ */ -+ goto out; -+ } -+ break; -+ -+ /* Share existing memory allocation. -+ */ -+ case VMCS_SM_CMD_ALLOC_SHARE: -+ { -+ struct vmcs_sm_ioctl_alloc_share ioparam; -+ -+ /* Get the parameter data. -+ */ -+ if (copy_from_user -+ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ ret = vc_sm_ioctl_alloc_share(file_data, &ioparam); -+ -+ /* Copy result back to user. -+ */ -+ if (!ret -+ && copy_to_user((void *)arg, &ioparam, -+ sizeof(ioparam)) != 0) { -+ struct vmcs_sm_ioctl_free freeparam = { -+ ioparam.handle -+ }; -+ pr_err("[%s]: failed to copy-to-user for cmd %x\n", -+ __func__, cmdnr); -+ vc_sm_ioctl_free(file_data, &freeparam); -+ ret = -EFAULT; -+ } -+ -+ /* Done. -+ */ -+ goto out; -+ } -+ break; -+ -+ /* Lock (attempt to) *and* register a cache behavior change. -+ */ -+ case VMCS_SM_CMD_LOCK_CACHE: -+ { -+ struct vmcs_sm_ioctl_lock_cache ioparam; -+ struct vmcs_sm_ioctl_lock_unlock lock; -+ -+ /* Get parameter data. -+ */ -+ if (copy_from_user -+ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ lock.handle = ioparam.handle; -+ ret = -+ vc_sm_ioctl_lock(file_data, &lock, 1, -+ ioparam.cached, 0); -+ -+ /* Done. -+ */ -+ goto out; -+ } -+ break; -+ -+ /* Lock (attempt to) existing memory allocation. -+ */ -+ case VMCS_SM_CMD_LOCK: -+ { -+ struct vmcs_sm_ioctl_lock_unlock ioparam; -+ -+ /* Get parameter data. -+ */ -+ if (copy_from_user -+ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ ret = vc_sm_ioctl_lock(file_data, &ioparam, 0, 0, 0); -+ -+ /* Copy result back to user. -+ */ -+ if (copy_to_user((void *)arg, &ioparam, sizeof(ioparam)) -+ != 0) { -+ pr_err("[%s]: failed to copy-to-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ } -+ -+ /* Done. -+ */ -+ goto out; -+ } -+ break; -+ -+ /* Unlock (attempt to) existing memory allocation. -+ */ -+ case VMCS_SM_CMD_UNLOCK: -+ { -+ struct vmcs_sm_ioctl_lock_unlock ioparam; -+ -+ /* Get parameter data. -+ */ -+ if (copy_from_user -+ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ ret = vc_sm_ioctl_unlock(file_data, &ioparam, 0, 1, 0); -+ -+ /* Done. -+ */ -+ goto out; -+ } -+ break; -+ -+ /* Resize (attempt to) existing memory allocation. -+ */ -+ case VMCS_SM_CMD_RESIZE: -+ { -+ struct vmcs_sm_ioctl_resize ioparam; -+ -+ /* Get parameter data. -+ */ -+ if (copy_from_user -+ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ ret = vc_sm_ioctl_resize(file_data, &ioparam); -+ -+ /* Copy result back to user. -+ */ -+ if (copy_to_user((void *)arg, &ioparam, sizeof(ioparam)) -+ != 0) { -+ pr_err("[%s]: failed to copy-to-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ } -+ -+ /* Done. -+ */ -+ goto out; -+ } -+ break; -+ -+ /* Terminate existing memory allocation. -+ */ -+ case VMCS_SM_CMD_FREE: -+ { -+ struct vmcs_sm_ioctl_free ioparam; -+ -+ /* Get parameter data. -+ */ -+ if (copy_from_user -+ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ ret = vc_sm_ioctl_free(file_data, &ioparam); -+ -+ /* Done. -+ */ -+ goto out; -+ } -+ break; -+ -+ /* Walk allocation on videocore, information shows up in the -+ ** videocore log. -+ */ -+ case VMCS_SM_CMD_VC_WALK_ALLOC: -+ { -+ pr_debug("[%s]: invoking walk alloc\n", __func__); -+ -+ if (vc_vchi_sm_walk_alloc(sm_state->sm_handle) != 0) -+ pr_err("[%s]: failed to walk-alloc on videocore\n", -+ __func__); -+ -+ /* Done. -+ */ -+ goto out; -+ } -+ break; -+/* Walk mapping table on host, information shows up in the -+ ** kernel log. -+ */ -+ case VMCS_SM_CMD_HOST_WALK_MAP: -+ { -+ /* Use pid of -1 to tell to walk the whole map. */ -+ vmcs_sm_host_walk_map_per_pid(-1); -+ -+ /* Done. */ -+ goto out; -+ } -+ break; -+ -+ /* Walk mapping table per process on host. */ -+ case VMCS_SM_CMD_HOST_WALK_PID_ALLOC: -+ { -+ struct vmcs_sm_ioctl_walk ioparam; -+ -+ /* Get parameter data. */ -+ if (copy_from_user(&ioparam, -+ (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ vmcs_sm_host_walk_alloc(file_data); -+ -+ /* Done. */ -+ goto out; -+ } -+ break; -+ -+ /* Walk allocation per process on host. */ -+ case VMCS_SM_CMD_HOST_WALK_PID_MAP: -+ { -+ struct vmcs_sm_ioctl_walk ioparam; -+ -+ /* Get parameter data. */ -+ if (copy_from_user(&ioparam, -+ (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ vmcs_sm_host_walk_map_per_pid(ioparam.pid); -+ -+ /* Done. */ -+ goto out; -+ } -+ break; -+ -+ /* Gets the size of the memory associated with a user handle. */ -+ case VMCS_SM_CMD_SIZE_USR_HANDLE: -+ { -+ struct vmcs_sm_ioctl_size ioparam; -+ -+ /* Get parameter data. */ -+ if (copy_from_user(&ioparam, -+ (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ /* Locate resource from GUID. */ -+ resource = -+ vmcs_sm_acquire_resource(file_data, ioparam.handle); -+ if (resource != NULL) { -+ ioparam.size = resource->res_size; -+ vmcs_sm_release_resource(resource, 0); -+ } else { -+ ioparam.size = 0; -+ } -+ -+ if (copy_to_user((void *)arg, -+ &ioparam, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-to-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ } -+ -+ /* Done. */ -+ goto out; -+ } -+ break; -+ -+ /* Verify we are dealing with a valid resource. */ -+ case VMCS_SM_CMD_CHK_USR_HANDLE: -+ { -+ struct vmcs_sm_ioctl_chk ioparam; -+ -+ /* Get parameter data. -+ */ -+ if (copy_from_user(&ioparam, -+ (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ /* Locate resource from GUID. */ -+ resource = -+ vmcs_sm_acquire_resource(file_data, ioparam.handle); -+ if (resource == NULL) -+ ret = -EINVAL; -+ /* If the resource is cacheable, return additional -+ * information that may be needed to flush the cache. -+ */ -+ else if ((resource->res_cached == VMCS_SM_CACHE_HOST) || -+ (resource->res_cached == VMCS_SM_CACHE_BOTH)) { -+ ioparam.addr = -+ vmcs_sm_usr_address_from_pid_and_usr_handle -+ (current->tgid, ioparam.handle); -+ ioparam.size = resource->res_size; -+ ioparam.cache = resource->res_cached; -+ } else { -+ ioparam.addr = 0; -+ ioparam.size = 0; -+ ioparam.cache = resource->res_cached; -+ } -+ -+ if (resource) -+ vmcs_sm_release_resource(resource, 0); -+ -+ if (copy_to_user((void *)arg, -+ &ioparam, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-to-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ } -+ -+ /* Done. -+ */ -+ goto out; -+ } -+ break; -+ -+ /* -+ * Maps a user handle given the process and the virtual address. -+ */ -+ case VMCS_SM_CMD_MAPPED_USR_HANDLE: -+ { -+ struct vmcs_sm_ioctl_map ioparam; -+ -+ /* Get parameter data. */ -+ if (copy_from_user(&ioparam, -+ (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ ioparam.handle = -+ vmcs_sm_usr_handle_from_pid_and_address( -+ ioparam.pid, ioparam.addr); -+ -+ resource = -+ vmcs_sm_acquire_resource(file_data, ioparam.handle); -+ if ((resource != NULL) -+ && ((resource->res_cached == VMCS_SM_CACHE_HOST) -+ || (resource->res_cached == -+ VMCS_SM_CACHE_BOTH))) { -+ ioparam.size = resource->res_size; -+ } else { -+ ioparam.size = 0; -+ } -+ -+ if (resource) -+ vmcs_sm_release_resource(resource, 0); -+ -+ if (copy_to_user((void *)arg, -+ &ioparam, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-to-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ } -+ -+ /* Done. */ -+ goto out; -+ } -+ break; -+ -+ /* -+ * Maps a videocore handle given process and virtual address. -+ */ -+ case VMCS_SM_CMD_MAPPED_VC_HDL_FROM_ADDR: -+ { -+ struct vmcs_sm_ioctl_map ioparam; -+ -+ /* Get parameter data. */ -+ if (copy_from_user(&ioparam, -+ (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ ioparam.handle = vmcs_sm_vc_handle_from_pid_and_address( -+ ioparam.pid, ioparam.addr); -+ -+ if (copy_to_user((void *)arg, -+ &ioparam, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-to-user for cmd %x\n", -+ __func__, cmdnr); -+ -+ ret = -EFAULT; -+ } -+ -+ /* Done. -+ */ -+ goto out; -+ } -+ break; -+ -+ /* Maps a videocore handle given process and user handle. */ -+ case VMCS_SM_CMD_MAPPED_VC_HDL_FROM_HDL: -+ { -+ struct vmcs_sm_ioctl_map ioparam; -+ -+ /* Get parameter data. */ -+ if (copy_from_user(&ioparam, -+ (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ /* Locate resource from GUID. */ -+ resource = -+ vmcs_sm_acquire_resource(file_data, ioparam.handle); -+ if (resource != NULL) { -+ ioparam.handle = resource->res_handle; -+ vmcs_sm_release_resource(resource, 0); -+ } else { -+ ioparam.handle = 0; -+ } -+ -+ if (copy_to_user((void *)arg, -+ &ioparam, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-to-user for cmd %x\n", -+ __func__, cmdnr); -+ -+ ret = -EFAULT; -+ } -+ -+ /* Done. */ -+ goto out; -+ } -+ break; -+ -+ /* -+ * Maps a videocore address given process and videocore handle. -+ */ -+ case VMCS_SM_CMD_MAPPED_VC_ADDR_FROM_HDL: -+ { -+ struct vmcs_sm_ioctl_map ioparam; -+ -+ /* Get parameter data. */ -+ if (copy_from_user(&ioparam, -+ (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ /* Locate resource from GUID. */ -+ resource = -+ vmcs_sm_acquire_resource(file_data, ioparam.handle); -+ if (resource != NULL) { -+ ioparam.addr = -+ (unsigned int)resource->res_base_mem; -+ vmcs_sm_release_resource(resource, 0); -+ } else { -+ ioparam.addr = 0; -+ } -+ -+ if (copy_to_user((void *)arg, -+ &ioparam, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-to-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ } -+ -+ /* Done. */ -+ goto out; -+ } -+ break; -+ -+ /* Maps a user address given process and vc handle. -+ */ -+ case VMCS_SM_CMD_MAPPED_USR_ADDRESS: -+ { -+ struct vmcs_sm_ioctl_map ioparam; -+ -+ /* Get parameter data. */ -+ if (copy_from_user(&ioparam, -+ (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ /* -+ * Return the address information from the mapping, -+ * 0 (ie NULL) if it cannot locate the actual mapping. -+ */ -+ ioparam.addr = -+ vmcs_sm_usr_address_from_pid_and_usr_handle -+ (ioparam.pid, ioparam.handle); -+ -+ if (copy_to_user((void *)arg, -+ &ioparam, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-to-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ } -+ -+ /* Done. */ -+ goto out; -+ } -+ break; -+ -+ /* Flush the cache for a given mapping. */ -+ case VMCS_SM_CMD_FLUSH: -+ { -+ struct vmcs_sm_ioctl_cache ioparam; -+ -+ /* Get parameter data. */ -+ if (copy_from_user(&ioparam, -+ (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ /* Locate resource from GUID. */ -+ resource = -+ vmcs_sm_acquire_resource(file_data, ioparam.handle); -+ -+ if ((resource != NULL) && resource->res_cached) { -+ dma_addr_t phys_addr = 0; -+ -+ resource->res_stats[FLUSH]++; -+ -+ phys_addr = -+ (dma_addr_t)((uint32_t) -+ resource->res_base_mem & -+ 0x3FFFFFFF); -+ phys_addr += (dma_addr_t)mm_vc_mem_phys_addr; -+ -+ /* L1 cache flush */ -+ down_read(¤t->mm->mmap_sem); -+ vcsm_vma_cache_clean_page_range((unsigned long) -+ ioparam.addr, -+ (unsigned long) -+ ioparam.addr + -+ ioparam.size); -+ up_read(¤t->mm->mmap_sem); -+ -+ /* L2 cache flush */ -+ outer_clean_range(phys_addr, -+ phys_addr + -+ (size_t) ioparam.size); -+ } else if (resource == NULL) { -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ if (resource) -+ vmcs_sm_release_resource(resource, 0); -+ -+ /* Done. */ -+ goto out; -+ } -+ break; -+ -+ /* Invalidate the cache for a given mapping. */ -+ case VMCS_SM_CMD_INVALID: -+ { -+ struct vmcs_sm_ioctl_cache ioparam; -+ -+ /* Get parameter data. */ -+ if (copy_from_user(&ioparam, -+ (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ goto out; -+ } -+ -+ /* Locate resource from GUID. -+ */ -+ resource = -+ vmcs_sm_acquire_resource(file_data, ioparam.handle); -+ -+ if ((resource != NULL) && resource->res_cached) { -+ dma_addr_t phys_addr = 0; -+ -+ resource->res_stats[INVALID]++; -+ -+ phys_addr = -+ (dma_addr_t)((uint32_t) -+ resource->res_base_mem & -+ 0x3FFFFFFF); -+ phys_addr += (dma_addr_t)mm_vc_mem_phys_addr; -+ -+ /* L2 cache invalidate */ -+ outer_inv_range(phys_addr, -+ phys_addr + -+ (size_t) ioparam.size); -+ -+ /* L1 cache invalidate */ -+ down_read(¤t->mm->mmap_sem); -+ vcsm_vma_cache_clean_page_range((unsigned long) -+ ioparam.addr, -+ (unsigned long) -+ ioparam.addr + -+ ioparam.size); -+ up_read(¤t->mm->mmap_sem); -+ } else if (resource == NULL) { -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ if (resource) -+ vmcs_sm_release_resource(resource, 0); -+ -+ /* Done. -+ */ -+ goto out; -+ } -+ break; -+ -+ /* Flush/Invalidate the cache for a given mapping. */ -+ case VMCS_SM_CMD_CLEAN_INVALID: -+ { -+ int i; -+ struct vmcs_sm_ioctl_clean_invalid ioparam; -+ -+ /* Get parameter data. */ -+ if (copy_from_user(&ioparam, -+ (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user for cmd %x\n", -+ __func__, cmdnr); -+ ret = -EFAULT; -+ goto out; -+ } -+ for (i=0; ires_cached) { -+ unsigned long base = ioparam.s[i].addr & ~(PAGE_SIZE-1); -+ unsigned long end = (ioparam.s[i].addr + ioparam.s[i].size + PAGE_SIZE-1) & ~(PAGE_SIZE-1); -+ resource->res_stats[ioparam.s[i].cmd == 1 ? INVALID:FLUSH]++; -+ -+ /* L1/L2 cache flush */ -+ down_read(¤t->mm->mmap_sem); -+ vcsm_vma_cache_clean_page_range(base, end); -+ up_read(¤t->mm->mmap_sem); -+ } else if (resource == NULL) { -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ if (resource) -+ vmcs_sm_release_resource(resource, 0); -+ } -+ break; -+ } -+ } -+ } -+ break; -+ -+ default: -+ { -+ ret = -EINVAL; -+ goto out; -+ } -+ break; -+ } -+ -+out: -+ return ret; -+} -+ -+/* Device operations that we managed in this driver. -+*/ -+static const struct file_operations vmcs_sm_ops = { -+ .owner = THIS_MODULE, -+ .unlocked_ioctl = vc_sm_ioctl, -+ .open = vc_sm_open, -+ .release = vc_sm_release, -+ .mmap = vc_sm_mmap, -+}; -+ -+/* Creation of device. -+*/ -+static int vc_sm_create_sharedmemory(void) -+{ -+ int ret; -+ -+ if (sm_state == NULL) { -+ ret = -ENOMEM; -+ goto out; -+ } -+ -+ /* Create a device class for creating dev nodes. -+ */ -+ sm_state->sm_class = class_create(THIS_MODULE, "vc-sm"); -+ if (IS_ERR(sm_state->sm_class)) { -+ pr_err("[%s]: unable to create device class\n", __func__); -+ ret = PTR_ERR(sm_state->sm_class); -+ goto out; -+ } -+ -+ /* Create a character driver. -+ */ -+ ret = alloc_chrdev_region(&sm_state->sm_devid, -+ DEVICE_MINOR, 1, DEVICE_NAME); -+ if (ret != 0) { -+ pr_err("[%s]: unable to allocate device number\n", __func__); -+ goto out_dev_class_destroy; -+ } -+ -+ cdev_init(&sm_state->sm_cdev, &vmcs_sm_ops); -+ ret = cdev_add(&sm_state->sm_cdev, sm_state->sm_devid, 1); -+ if (ret != 0) { -+ pr_err("[%s]: unable to register device\n", __func__); -+ goto out_chrdev_unreg; -+ } -+ -+ /* Create a device node. -+ */ -+ sm_state->sm_dev = device_create(sm_state->sm_class, -+ NULL, -+ MKDEV(MAJOR(sm_state->sm_devid), -+ DEVICE_MINOR), NULL, -+ DEVICE_NAME); -+ if (IS_ERR(sm_state->sm_dev)) { -+ pr_err("[%s]: unable to create device node\n", __func__); -+ ret = PTR_ERR(sm_state->sm_dev); -+ goto out_chrdev_del; -+ } -+ -+ goto out; -+ -+out_chrdev_del: -+ cdev_del(&sm_state->sm_cdev); -+out_chrdev_unreg: -+ unregister_chrdev_region(sm_state->sm_devid, 1); -+out_dev_class_destroy: -+ class_destroy(sm_state->sm_class); -+ sm_state->sm_class = NULL; -+out: -+ return ret; -+} -+ -+/* Termination of the device. -+*/ -+static int vc_sm_remove_sharedmemory(void) -+{ -+ int ret; -+ -+ if (sm_state == NULL) { -+ /* Nothing to do. -+ */ -+ ret = 0; -+ goto out; -+ } -+ -+ /* Remove the sharedmemory character driver. -+ */ -+ cdev_del(&sm_state->sm_cdev); -+ -+ /* Unregister region. -+ */ -+ unregister_chrdev_region(sm_state->sm_devid, 1); -+ -+ ret = 0; -+ goto out; -+ -+out: -+ return ret; -+} -+ -+/* Videocore connected. */ -+static void vc_sm_connected_init(void) -+{ -+ int ret; -+ VCHI_INSTANCE_T vchi_instance; -+ VCHI_CONNECTION_T *vchi_connection = NULL; -+ -+ pr_info("[%s]: start\n", __func__); -+ -+ /* Allocate memory for the state structure. -+ */ -+ sm_state = kzalloc(sizeof(struct SM_STATE_T), GFP_KERNEL); -+ if (sm_state == NULL) { -+ pr_err("[%s]: failed to allocate memory\n", __func__); -+ ret = -ENOMEM; -+ goto out; -+ } -+ -+ mutex_init(&sm_state->lock); -+ mutex_init(&sm_state->map_lock); -+ -+ /* Initialize and create a VCHI connection for the shared memory service -+ ** running on videocore. -+ */ -+ ret = vchi_initialise(&vchi_instance); -+ if (ret != 0) { -+ pr_err("[%s]: failed to initialise VCHI instance (ret=%d)\n", -+ __func__, ret); -+ -+ ret = -EIO; -+ goto err_free_mem; -+ } -+ -+ ret = vchi_connect(NULL, 0, vchi_instance); -+ if (ret != 0) { -+ pr_err("[%s]: failed to connect VCHI instance (ret=%d)\n", -+ __func__, ret); -+ -+ ret = -EIO; -+ goto err_free_mem; -+ } -+ -+ /* Initialize an instance of the shared memory service. */ -+ sm_state->sm_handle = -+ vc_vchi_sm_init(vchi_instance, &vchi_connection, 1); -+ if (sm_state->sm_handle == NULL) { -+ pr_err("[%s]: failed to initialize shared memory service\n", -+ __func__); -+ -+ ret = -EPERM; -+ goto err_free_mem; -+ } -+ -+ /* Create a debug fs directory entry (root). */ -+ sm_state->dir_root = debugfs_create_dir(VC_SM_DIR_ROOT_NAME, NULL); -+ if (!sm_state->dir_root) { -+ pr_err("[%s]: failed to create \'%s\' directory entry\n", -+ __func__, VC_SM_DIR_ROOT_NAME); -+ -+ ret = -EPERM; -+ goto err_stop_sm_service; -+ } -+ -+ sm_state->dir_state.show = &vc_sm_global_state_show; -+ sm_state->dir_state.dir_entry = debugfs_create_file(VC_SM_STATE, -+ S_IRUGO, sm_state->dir_root, &sm_state->dir_state, -+ &vc_sm_debug_fs_fops); -+ -+ sm_state->dir_stats.show = &vc_sm_global_statistics_show; -+ sm_state->dir_stats.dir_entry = debugfs_create_file(VC_SM_STATS, -+ S_IRUGO, sm_state->dir_root, &sm_state->dir_stats, -+ &vc_sm_debug_fs_fops); -+ -+ /* Create the proc entry children. */ -+ sm_state->dir_alloc = debugfs_create_dir(VC_SM_DIR_ALLOC_NAME, -+ sm_state->dir_root); -+ -+ /* Create a shared memory device. */ -+ ret = vc_sm_create_sharedmemory(); -+ if (ret != 0) { -+ pr_err("[%s]: failed to create shared memory device\n", -+ __func__); -+ goto err_remove_debugfs; -+ } -+ -+ INIT_LIST_HEAD(&sm_state->map_list); -+ INIT_LIST_HEAD(&sm_state->resource_list); -+ -+ sm_state->data_knl = vc_sm_create_priv_data(0); -+ if (sm_state->data_knl == NULL) { -+ pr_err("[%s]: failed to create kernel private data tracker\n", -+ __func__); -+ goto err_remove_shared_memory; -+ } -+ -+ /* Done! -+ */ -+ sm_inited = 1; -+ goto out; -+ -+err_remove_shared_memory: -+ vc_sm_remove_sharedmemory(); -+err_remove_debugfs: -+ debugfs_remove_recursive(sm_state->dir_root); -+err_stop_sm_service: -+ vc_vchi_sm_stop(&sm_state->sm_handle); -+err_free_mem: -+ kfree(sm_state); -+out: -+ pr_info("[%s]: end - returning %d\n", __func__, ret); -+} -+ -+/* Driver loading. */ -+static int __init vc_sm_init(void) -+{ -+ pr_info("vc-sm: Videocore shared memory driver\n"); -+ vchiq_add_connected_callback(vc_sm_connected_init); -+ return 0; -+} -+ -+/* Driver unloading. */ -+static void __exit vc_sm_exit(void) -+{ -+ pr_debug("[%s]: start\n", __func__); -+ if (sm_inited) { -+ /* Remove shared memory device. -+ */ -+ vc_sm_remove_sharedmemory(); -+ -+ /* Remove all proc entries. -+ */ -+ debugfs_remove_recursive(sm_state->dir_root); -+ -+ /* Stop the videocore shared memory service. -+ */ -+ vc_vchi_sm_stop(&sm_state->sm_handle); -+ -+ /* Free the memory for the state structure. -+ */ -+ mutex_destroy(&(sm_state->map_lock)); -+ kfree(sm_state); -+ } -+ -+ pr_debug("[%s]: end\n", __func__); -+} -+ -+#if defined(__KERNEL__) -+/* Allocate a shared memory handle and block. */ -+int vc_sm_alloc(VC_SM_ALLOC_T *alloc, int *handle) -+{ -+ struct vmcs_sm_ioctl_alloc ioparam = { 0 }; -+ int ret; -+ struct SM_RESOURCE_T *resource; -+ -+ /* Validate we can work with this device. -+ */ -+ if (sm_state == NULL || alloc == NULL || handle == NULL) { -+ pr_err("[%s]: invalid input\n", __func__); -+ return -EPERM; -+ } -+ -+ ioparam.size = alloc->base_unit; -+ ioparam.num = alloc->num_unit; -+ ioparam.cached = -+ alloc->type == VC_SM_ALLOC_CACHED ? VMCS_SM_CACHE_VC : 0; -+ -+ ret = vc_sm_ioctl_alloc(sm_state->data_knl, &ioparam); -+ -+ if (ret == 0) { -+ resource = -+ vmcs_sm_acquire_resource(sm_state->data_knl, -+ ioparam.handle); -+ if (resource) { -+ resource->pid = 0; -+ vmcs_sm_release_resource(resource, 0); -+ -+ /* Assign valid handle at this time. -+ */ -+ *handle = ioparam.handle; -+ } else { -+ ret = -ENOMEM; -+ } -+ } -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(vc_sm_alloc); -+ -+/* Get an internal resource handle mapped from the external one. -+*/ -+int vc_sm_int_handle(int handle) -+{ -+ struct SM_RESOURCE_T *resource; -+ int ret = 0; -+ -+ /* Validate we can work with this device. -+ */ -+ if (sm_state == NULL || handle == 0) { -+ pr_err("[%s]: invalid input\n", __func__); -+ return 0; -+ } -+ -+ /* Locate resource from GUID. -+ */ -+ resource = vmcs_sm_acquire_resource(sm_state->data_knl, handle); -+ if (resource) { -+ ret = resource->res_handle; -+ vmcs_sm_release_resource(resource, 0); -+ } -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(vc_sm_int_handle); -+ -+/* Free a previously allocated shared memory handle and block. -+*/ -+int vc_sm_free(int handle) -+{ -+ struct vmcs_sm_ioctl_free ioparam = { handle }; -+ -+ /* Validate we can work with this device. -+ */ -+ if (sm_state == NULL || handle == 0) { -+ pr_err("[%s]: invalid input\n", __func__); -+ return -EPERM; -+ } -+ -+ return vc_sm_ioctl_free(sm_state->data_knl, &ioparam); -+} -+EXPORT_SYMBOL_GPL(vc_sm_free); -+ -+/* Lock a memory handle for use by kernel. -+*/ -+int vc_sm_lock(int handle, VC_SM_LOCK_CACHE_MODE_T mode, -+ long unsigned int *data) -+{ -+ struct vmcs_sm_ioctl_lock_unlock ioparam; -+ int ret; -+ -+ /* Validate we can work with this device. -+ */ -+ if (sm_state == NULL || handle == 0 || data == NULL) { -+ pr_err("[%s]: invalid input\n", __func__); -+ return -EPERM; -+ } -+ -+ *data = 0; -+ -+ ioparam.handle = handle; -+ ret = vc_sm_ioctl_lock(sm_state->data_knl, -+ &ioparam, -+ 1, -+ ((mode == -+ VC_SM_LOCK_CACHED) ? VMCS_SM_CACHE_HOST : -+ VMCS_SM_CACHE_NONE), 0); -+ -+ *data = ioparam.addr; -+ return ret; -+} -+EXPORT_SYMBOL_GPL(vc_sm_lock); -+ -+/* Unlock a memory handle in use by kernel. -+*/ -+int vc_sm_unlock(int handle, int flush, int no_vc_unlock) -+{ -+ struct vmcs_sm_ioctl_lock_unlock ioparam; -+ -+ /* Validate we can work with this device. -+ */ -+ if (sm_state == NULL || handle == 0) { -+ pr_err("[%s]: invalid input\n", __func__); -+ return -EPERM; -+ } -+ -+ ioparam.handle = handle; -+ return vc_sm_ioctl_unlock(sm_state->data_knl, -+ &ioparam, flush, 0, no_vc_unlock); -+} -+EXPORT_SYMBOL_GPL(vc_sm_unlock); -+ -+/* Map a shared memory region for use by kernel. -+*/ -+int vc_sm_map(int handle, unsigned int sm_addr, VC_SM_LOCK_CACHE_MODE_T mode, -+ long unsigned int *data) -+{ -+ struct vmcs_sm_ioctl_lock_unlock ioparam; -+ int ret; -+ -+ /* Validate we can work with this device. -+ */ -+ if (sm_state == NULL || handle == 0 || data == NULL || sm_addr == 0) { -+ pr_err("[%s]: invalid input\n", __func__); -+ return -EPERM; -+ } -+ -+ *data = 0; -+ -+ ioparam.handle = handle; -+ ret = vc_sm_ioctl_lock(sm_state->data_knl, -+ &ioparam, -+ 1, -+ ((mode == -+ VC_SM_LOCK_CACHED) ? VMCS_SM_CACHE_HOST : -+ VMCS_SM_CACHE_NONE), sm_addr); -+ -+ *data = ioparam.addr; -+ return ret; -+} -+EXPORT_SYMBOL_GPL(vc_sm_map); -+#endif -+ -+late_initcall(vc_sm_init); -+module_exit(vc_sm_exit); -+ -+MODULE_AUTHOR("Broadcom"); -+MODULE_DESCRIPTION("VideoCore SharedMemory Driver"); -+MODULE_LICENSE("GPL v2"); ---- /dev/null -+++ b/include/linux/broadcom/vmcs_sm_ioctl.h -@@ -0,0 +1,248 @@ -+/***************************************************************************** -+* Copyright 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+* -+*****************************************************************************/ -+ -+#if !defined(__VMCS_SM_IOCTL_H__INCLUDED__) -+#define __VMCS_SM_IOCTL_H__INCLUDED__ -+ -+/* ---- Include Files ---------------------------------------------------- */ -+ -+#if defined(__KERNEL__) -+#include /* Needed for standard types */ -+#else -+#include -+#endif -+ -+#include -+ -+/* ---- Constants and Types ---------------------------------------------- */ -+ -+#define VMCS_SM_RESOURCE_NAME 32 -+#define VMCS_SM_RESOURCE_NAME_DEFAULT "sm-host-resource" -+ -+/* Type define used to create unique IOCTL number */ -+#define VMCS_SM_MAGIC_TYPE 'I' -+ -+/* IOCTL commands */ -+enum vmcs_sm_cmd_e { -+ VMCS_SM_CMD_ALLOC = 0x5A, /* Start at 0x5A arbitrarily */ -+ VMCS_SM_CMD_ALLOC_SHARE, -+ VMCS_SM_CMD_LOCK, -+ VMCS_SM_CMD_LOCK_CACHE, -+ VMCS_SM_CMD_UNLOCK, -+ VMCS_SM_CMD_RESIZE, -+ VMCS_SM_CMD_UNMAP, -+ VMCS_SM_CMD_FREE, -+ VMCS_SM_CMD_FLUSH, -+ VMCS_SM_CMD_INVALID, -+ -+ VMCS_SM_CMD_SIZE_USR_HANDLE, -+ VMCS_SM_CMD_CHK_USR_HANDLE, -+ -+ VMCS_SM_CMD_MAPPED_USR_HANDLE, -+ VMCS_SM_CMD_MAPPED_USR_ADDRESS, -+ VMCS_SM_CMD_MAPPED_VC_HDL_FROM_ADDR, -+ VMCS_SM_CMD_MAPPED_VC_HDL_FROM_HDL, -+ VMCS_SM_CMD_MAPPED_VC_ADDR_FROM_HDL, -+ -+ VMCS_SM_CMD_VC_WALK_ALLOC, -+ VMCS_SM_CMD_HOST_WALK_MAP, -+ VMCS_SM_CMD_HOST_WALK_PID_ALLOC, -+ VMCS_SM_CMD_HOST_WALK_PID_MAP, -+ -+ VMCS_SM_CMD_CLEAN_INVALID, -+ -+ VMCS_SM_CMD_LAST /* Do no delete */ -+}; -+ -+/* Cache type supported, conveniently matches the user space definition in -+** user-vcsm.h. -+*/ -+enum vmcs_sm_cache_e { -+ VMCS_SM_CACHE_NONE, -+ VMCS_SM_CACHE_HOST, -+ VMCS_SM_CACHE_VC, -+ VMCS_SM_CACHE_BOTH, -+}; -+ -+/* IOCTL Data structures */ -+struct vmcs_sm_ioctl_alloc { -+ /* user -> kernel */ -+ unsigned int size; -+ unsigned int num; -+ enum vmcs_sm_cache_e cached; -+ char name[VMCS_SM_RESOURCE_NAME]; -+ -+ /* kernel -> user */ -+ unsigned int handle; -+ /* unsigned int base_addr; */ -+}; -+ -+struct vmcs_sm_ioctl_alloc_share { -+ /* user -> kernel */ -+ unsigned int handle; -+ unsigned int size; -+}; -+ -+struct vmcs_sm_ioctl_free { -+ /* user -> kernel */ -+ unsigned int handle; -+ /* unsigned int base_addr; */ -+}; -+ -+struct vmcs_sm_ioctl_lock_unlock { -+ /* user -> kernel */ -+ unsigned int handle; -+ -+ /* kernel -> user */ -+ unsigned int addr; -+}; -+ -+struct vmcs_sm_ioctl_lock_cache { -+ /* user -> kernel */ -+ unsigned int handle; -+ enum vmcs_sm_cache_e cached; -+}; -+ -+struct vmcs_sm_ioctl_resize { -+ /* user -> kernel */ -+ unsigned int handle; -+ unsigned int new_size; -+ -+ /* kernel -> user */ -+ unsigned int old_size; -+}; -+ -+struct vmcs_sm_ioctl_map { -+ /* user -> kernel */ -+ /* and kernel -> user */ -+ unsigned int pid; -+ unsigned int handle; -+ unsigned int addr; -+ -+ /* kernel -> user */ -+ unsigned int size; -+}; -+ -+struct vmcs_sm_ioctl_walk { -+ /* user -> kernel */ -+ unsigned int pid; -+}; -+ -+struct vmcs_sm_ioctl_chk { -+ /* user -> kernel */ -+ unsigned int handle; -+ -+ /* kernel -> user */ -+ unsigned int addr; -+ unsigned int size; -+ enum vmcs_sm_cache_e cache; -+}; -+ -+struct vmcs_sm_ioctl_size { -+ /* user -> kernel */ -+ unsigned int handle; -+ -+ /* kernel -> user */ -+ unsigned int size; -+}; -+ -+struct vmcs_sm_ioctl_cache { -+ /* user -> kernel */ -+ unsigned int handle; -+ unsigned int addr; -+ unsigned int size; -+}; -+ -+struct vmcs_sm_ioctl_clean_invalid { -+ /* user -> kernel */ -+ struct { -+ unsigned int cmd; -+ unsigned int handle; -+ unsigned int addr; -+ unsigned int size; -+ } s[8]; -+}; -+ -+/* IOCTL numbers */ -+#define VMCS_SM_IOCTL_MEM_ALLOC\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_ALLOC,\ -+ struct vmcs_sm_ioctl_alloc) -+#define VMCS_SM_IOCTL_MEM_ALLOC_SHARE\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_ALLOC_SHARE,\ -+ struct vmcs_sm_ioctl_alloc_share) -+#define VMCS_SM_IOCTL_MEM_LOCK\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_LOCK,\ -+ struct vmcs_sm_ioctl_lock_unlock) -+#define VMCS_SM_IOCTL_MEM_LOCK_CACHE\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_LOCK_CACHE,\ -+ struct vmcs_sm_ioctl_lock_cache) -+#define VMCS_SM_IOCTL_MEM_UNLOCK\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_UNLOCK,\ -+ struct vmcs_sm_ioctl_lock_unlock) -+#define VMCS_SM_IOCTL_MEM_RESIZE\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_RESIZE,\ -+ struct vmcs_sm_ioctl_resize) -+#define VMCS_SM_IOCTL_MEM_FREE\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_FREE,\ -+ struct vmcs_sm_ioctl_free) -+#define VMCS_SM_IOCTL_MEM_FLUSH\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_FLUSH,\ -+ struct vmcs_sm_ioctl_cache) -+#define VMCS_SM_IOCTL_MEM_INVALID\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_INVALID,\ -+ struct vmcs_sm_ioctl_cache) -+#define VMCS_SM_IOCTL_MEM_CLEAN_INVALID\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_CLEAN_INVALID,\ -+ struct vmcs_sm_ioctl_clean_invalid) -+ -+#define VMCS_SM_IOCTL_SIZE_USR_HDL\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_SIZE_USR_HANDLE,\ -+ struct vmcs_sm_ioctl_size) -+#define VMCS_SM_IOCTL_CHK_USR_HDL\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_CHK_USR_HANDLE,\ -+ struct vmcs_sm_ioctl_chk) -+ -+#define VMCS_SM_IOCTL_MAP_USR_HDL\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_MAPPED_USR_HANDLE,\ -+ struct vmcs_sm_ioctl_map) -+#define VMCS_SM_IOCTL_MAP_USR_ADDRESS\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_MAPPED_USR_ADDRESS,\ -+ struct vmcs_sm_ioctl_map) -+#define VMCS_SM_IOCTL_MAP_VC_HDL_FR_ADDR\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_MAPPED_VC_HDL_FROM_ADDR,\ -+ struct vmcs_sm_ioctl_map) -+#define VMCS_SM_IOCTL_MAP_VC_HDL_FR_HDL\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_MAPPED_VC_HDL_FROM_HDL,\ -+ struct vmcs_sm_ioctl_map) -+#define VMCS_SM_IOCTL_MAP_VC_ADDR_FR_HDL\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_MAPPED_VC_ADDR_FROM_HDL,\ -+ struct vmcs_sm_ioctl_map) -+ -+#define VMCS_SM_IOCTL_VC_WALK_ALLOC\ -+ _IO(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_VC_WALK_ALLOC) -+#define VMCS_SM_IOCTL_HOST_WALK_MAP\ -+ _IO(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_HOST_WALK_MAP) -+#define VMCS_SM_IOCTL_HOST_WALK_PID_ALLOC\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_HOST_WALK_PID_ALLOC,\ -+ struct vmcs_sm_ioctl_walk) -+#define VMCS_SM_IOCTL_HOST_WALK_PID_MAP\ -+ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_HOST_WALK_PID_MAP,\ -+ struct vmcs_sm_ioctl_walk) -+ -+/* ---- Variable Externs ------------------------------------------------- */ -+ -+/* ---- Function Prototypes ---------------------------------------------- */ -+ -+#endif /* __VMCS_SM_IOCTL_H__INCLUDED__ */ diff --git a/target/linux/brcm2708/patches-4.9/0041-Add-dev-gpiomem-device-for-rootless-user-GPIO-access.patch b/target/linux/brcm2708/patches-4.9/0041-Add-dev-gpiomem-device-for-rootless-user-GPIO-access.patch deleted file mode 100644 index 618cb9f8dda8..000000000000 --- a/target/linux/brcm2708/patches-4.9/0041-Add-dev-gpiomem-device-for-rootless-user-GPIO-access.patch +++ /dev/null @@ -1,306 +0,0 @@ -From 0f326aa0cf8a16ab7f29606b2eda7186f1fb9367 Mon Sep 17 00:00:00 2001 -From: Luke Wren -Date: Fri, 21 Aug 2015 23:14:48 +0100 -Subject: [PATCH] Add /dev/gpiomem device for rootless user GPIO access - -Signed-off-by: Luke Wren - -bcm2835-gpiomem: Fix for ARCH_BCM2835 builds - -Build on ARCH_BCM2835, and fail to probe if no IO resource. - -See: https://github.com/raspberrypi/linux/issues/1154 ---- - drivers/char/broadcom/Kconfig | 9 ++ - drivers/char/broadcom/Makefile | 3 + - drivers/char/broadcom/bcm2835-gpiomem.c | 260 ++++++++++++++++++++++++++++++++ - 3 files changed, 272 insertions(+) - create mode 100644 drivers/char/broadcom/bcm2835-gpiomem.c - ---- a/drivers/char/broadcom/Kconfig -+++ b/drivers/char/broadcom/Kconfig -@@ -32,3 +32,12 @@ config BCM_VC_SM - help - Support for the VC shared memory on the Broadcom reference - design. Uses the VCHIQ stack. -+ -+config BCM2835_DEVGPIOMEM -+ tristate "/dev/gpiomem rootless GPIO access via mmap() on the BCM2835" -+ default m -+ help -+ Provides users with root-free access to the GPIO registers -+ on the 2835. Calling mmap(/dev/gpiomem) will map the GPIO -+ register page to the user's pointer. -+ ---- a/drivers/char/broadcom/Makefile -+++ b/drivers/char/broadcom/Makefile -@@ -1,3 +1,6 @@ - obj-$(CONFIG_BCM_VC_CMA) += vc_cma/ - obj-$(CONFIG_BCM2708_VCMEM) += vc_mem.o - obj-$(CONFIG_BCM_VC_SM) += vc_sm/ -+ -+obj-$(CONFIG_BCM2835_DEVGPIOMEM)+= bcm2835-gpiomem.o -+ ---- /dev/null -+++ b/drivers/char/broadcom/bcm2835-gpiomem.c -@@ -0,0 +1,260 @@ -+/** -+ * GPIO memory device driver -+ * -+ * Creates a chardev /dev/gpiomem which will provide user access to -+ * the BCM2835's GPIO registers when it is mmap()'d. -+ * No longer need root for user GPIO access, but without relaxing permissions -+ * on /dev/mem. -+ * -+ * Written by Luke Wren -+ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions, and the following disclaimer, -+ * without modification. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The names of the above-listed copyright holders may not be used -+ * to endorse or promote products derived from this software without -+ * specific prior written permission. -+ * -+ * ALTERNATIVELY, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") version 2, as published by the Free -+ * Software Foundation. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS -+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, -+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define DEVICE_NAME "bcm2835-gpiomem" -+#define DRIVER_NAME "gpiomem-bcm2835" -+#define DEVICE_MINOR 0 -+ -+struct bcm2835_gpiomem_instance { -+ unsigned long gpio_regs_phys; -+ struct device *dev; -+}; -+ -+static struct cdev bcm2835_gpiomem_cdev; -+static dev_t bcm2835_gpiomem_devid; -+static struct class *bcm2835_gpiomem_class; -+static struct device *bcm2835_gpiomem_dev; -+static struct bcm2835_gpiomem_instance *inst; -+ -+ -+/**************************************************************************** -+* -+* GPIO mem chardev file ops -+* -+***************************************************************************/ -+ -+static int bcm2835_gpiomem_open(struct inode *inode, struct file *file) -+{ -+ int dev = iminor(inode); -+ int ret = 0; -+ -+ dev_info(inst->dev, "gpiomem device opened."); -+ -+ if (dev != DEVICE_MINOR) { -+ dev_err(inst->dev, "Unknown minor device: %d", dev); -+ ret = -ENXIO; -+ } -+ return ret; -+} -+ -+static int bcm2835_gpiomem_release(struct inode *inode, struct file *file) -+{ -+ int dev = iminor(inode); -+ int ret = 0; -+ -+ if (dev != DEVICE_MINOR) { -+ dev_err(inst->dev, "Unknown minor device %d", dev); -+ ret = -ENXIO; -+ } -+ return ret; -+} -+ -+static const struct vm_operations_struct bcm2835_gpiomem_vm_ops = { -+#ifdef CONFIG_HAVE_IOREMAP_PROT -+ .access = generic_access_phys -+#endif -+}; -+ -+static int bcm2835_gpiomem_mmap(struct file *file, struct vm_area_struct *vma) -+{ -+ /* Ignore what the user says - they're getting the GPIO regs -+ whether they like it or not! */ -+ unsigned long gpio_page = inst->gpio_regs_phys >> PAGE_SHIFT; -+ -+ vma->vm_page_prot = phys_mem_access_prot(file, gpio_page, -+ PAGE_SIZE, -+ vma->vm_page_prot); -+ vma->vm_ops = &bcm2835_gpiomem_vm_ops; -+ if (remap_pfn_range(vma, vma->vm_start, -+ gpio_page, -+ PAGE_SIZE, -+ vma->vm_page_prot)) { -+ return -EAGAIN; -+ } -+ return 0; -+} -+ -+static const struct file_operations -+bcm2835_gpiomem_fops = { -+ .owner = THIS_MODULE, -+ .open = bcm2835_gpiomem_open, -+ .release = bcm2835_gpiomem_release, -+ .mmap = bcm2835_gpiomem_mmap, -+}; -+ -+ -+ /**************************************************************************** -+* -+* Probe and remove functions -+* -+***************************************************************************/ -+ -+ -+static int bcm2835_gpiomem_probe(struct platform_device *pdev) -+{ -+ int err; -+ void *ptr_err; -+ struct device *dev = &pdev->dev; -+ struct resource *ioresource; -+ -+ /* Allocate buffers and instance data */ -+ -+ inst = kzalloc(sizeof(struct bcm2835_gpiomem_instance), GFP_KERNEL); -+ -+ if (!inst) { -+ err = -ENOMEM; -+ goto failed_inst_alloc; -+ } -+ -+ inst->dev = dev; -+ -+ ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (ioresource) { -+ inst->gpio_regs_phys = ioresource->start; -+ } else { -+ dev_err(inst->dev, "failed to get IO resource"); -+ err = -ENOENT; -+ goto failed_get_resource; -+ } -+ -+ /* Create character device entries */ -+ -+ err = alloc_chrdev_region(&bcm2835_gpiomem_devid, -+ DEVICE_MINOR, 1, DEVICE_NAME); -+ if (err != 0) { -+ dev_err(inst->dev, "unable to allocate device number"); -+ goto failed_alloc_chrdev; -+ } -+ cdev_init(&bcm2835_gpiomem_cdev, &bcm2835_gpiomem_fops); -+ bcm2835_gpiomem_cdev.owner = THIS_MODULE; -+ err = cdev_add(&bcm2835_gpiomem_cdev, bcm2835_gpiomem_devid, 1); -+ if (err != 0) { -+ dev_err(inst->dev, "unable to register device"); -+ goto failed_cdev_add; -+ } -+ -+ /* Create sysfs entries */ -+ -+ bcm2835_gpiomem_class = class_create(THIS_MODULE, DEVICE_NAME); -+ ptr_err = bcm2835_gpiomem_class; -+ if (IS_ERR(ptr_err)) -+ goto failed_class_create; -+ -+ bcm2835_gpiomem_dev = device_create(bcm2835_gpiomem_class, NULL, -+ bcm2835_gpiomem_devid, NULL, -+ "gpiomem"); -+ ptr_err = bcm2835_gpiomem_dev; -+ if (IS_ERR(ptr_err)) -+ goto failed_device_create; -+ -+ dev_info(inst->dev, "Initialised: Registers at 0x%08lx", -+ inst->gpio_regs_phys); -+ -+ return 0; -+ -+failed_device_create: -+ class_destroy(bcm2835_gpiomem_class); -+failed_class_create: -+ cdev_del(&bcm2835_gpiomem_cdev); -+ err = PTR_ERR(ptr_err); -+failed_cdev_add: -+ unregister_chrdev_region(bcm2835_gpiomem_devid, 1); -+failed_alloc_chrdev: -+failed_get_resource: -+ kfree(inst); -+failed_inst_alloc: -+ dev_err(inst->dev, "could not load bcm2835_gpiomem"); -+ return err; -+} -+ -+static int bcm2835_gpiomem_remove(struct platform_device *pdev) -+{ -+ struct device *dev = inst->dev; -+ -+ kfree(inst); -+ device_destroy(bcm2835_gpiomem_class, bcm2835_gpiomem_devid); -+ class_destroy(bcm2835_gpiomem_class); -+ cdev_del(&bcm2835_gpiomem_cdev); -+ unregister_chrdev_region(bcm2835_gpiomem_devid, 1); -+ -+ dev_info(dev, "GPIO mem driver removed - OK"); -+ return 0; -+} -+ -+ /**************************************************************************** -+* -+* Register the driver with device tree -+* -+***************************************************************************/ -+ -+static const struct of_device_id bcm2835_gpiomem_of_match[] = { -+ {.compatible = "brcm,bcm2835-gpiomem",}, -+ { /* sentinel */ }, -+}; -+ -+MODULE_DEVICE_TABLE(of, bcm2835_gpiomem_of_match); -+ -+static struct platform_driver bcm2835_gpiomem_driver = { -+ .probe = bcm2835_gpiomem_probe, -+ .remove = bcm2835_gpiomem_remove, -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = bcm2835_gpiomem_of_match, -+ }, -+}; -+ -+module_platform_driver(bcm2835_gpiomem_driver); -+ -+MODULE_ALIAS("platform:gpiomem-bcm2835"); -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("gpiomem driver for accessing GPIO from userspace"); -+MODULE_AUTHOR("Luke Wren "); diff --git a/target/linux/brcm2708/patches-4.9/0042-Add-SMI-driver.patch b/target/linux/brcm2708/patches-4.9/0042-Add-SMI-driver.patch deleted file mode 100644 index 3d75e705ba7e..000000000000 --- a/target/linux/brcm2708/patches-4.9/0042-Add-SMI-driver.patch +++ /dev/null @@ -1,1930 +0,0 @@ -From 8b3f935c48ff65dfb8985ce3e6c631530cd1471a Mon Sep 17 00:00:00 2001 -From: Luke Wren -Date: Sat, 5 Sep 2015 01:14:45 +0100 -Subject: [PATCH] Add SMI driver - -Signed-off-by: Luke Wren ---- - .../bindings/misc/brcm,bcm2835-smi-dev.txt | 17 + - .../devicetree/bindings/misc/brcm,bcm2835-smi.txt | 48 + - drivers/char/broadcom/Kconfig | 8 + - drivers/char/broadcom/Makefile | 2 +- - drivers/char/broadcom/bcm2835_smi_dev.c | 402 +++++++++ - drivers/misc/Kconfig | 8 + - drivers/misc/Makefile | 1 + - drivers/misc/bcm2835_smi.c | 985 +++++++++++++++++++++ - include/linux/broadcom/bcm2835_smi.h | 391 ++++++++ - 9 files changed, 1861 insertions(+), 1 deletion(-) - create mode 100644 Documentation/devicetree/bindings/misc/brcm,bcm2835-smi-dev.txt - create mode 100644 Documentation/devicetree/bindings/misc/brcm,bcm2835-smi.txt - create mode 100644 drivers/char/broadcom/bcm2835_smi_dev.c - create mode 100644 drivers/misc/bcm2835_smi.c - create mode 100644 include/linux/broadcom/bcm2835_smi.h - ---- /dev/null -+++ b/Documentation/devicetree/bindings/misc/brcm,bcm2835-smi-dev.txt -@@ -0,0 +1,17 @@ -+* Broadcom BCM2835 SMI character device driver. -+ -+SMI or secondary memory interface is a peripheral specific to certain Broadcom -+SOCs, and is helpful for talking to things like parallel-interface displays -+and NAND flashes (in fact, most things with a parallel register interface). -+ -+This driver adds a character device which provides a user-space interface to -+an instance of the SMI driver. -+ -+Required properties: -+- compatible: "brcm,bcm2835-smi-dev" -+- smi_handle: a phandle to the smi node. -+ -+Optional properties: -+- None. -+ -+ ---- /dev/null -+++ b/Documentation/devicetree/bindings/misc/brcm,bcm2835-smi.txt -@@ -0,0 +1,48 @@ -+* Broadcom BCM2835 SMI driver. -+ -+SMI or secondary memory interface is a peripheral specific to certain Broadcom -+SOCs, and is helpful for talking to things like parallel-interface displays -+and NAND flashes (in fact, most things with a parallel register interface). -+ -+Required properties: -+- compatible: "brcm,bcm2835-smi" -+- reg: Should contain location and length of SMI registers and SMI clkman regs -+- interrupts: *the* SMI interrupt. -+- pinctrl-names: should be "default". -+- pinctrl-0: the phandle of the gpio pin node. -+- brcm,smi-clock-source: the clock source for clkman -+- brcm,smi-clock-divisor: the integer clock divisor for clkman -+- dmas: the dma controller phandle and the DREQ number (4 on a 2835) -+- dma-names: the name used by the driver to request its channel. -+ Should be "rx-tx". -+ -+Optional properties: -+- None. -+ -+Examples: -+ -+8 data pin configuration: -+ -+smi: smi@7e600000 { -+ compatible = "brcm,bcm2835-smi"; -+ reg = <0x7e600000 0x44>, <0x7e1010b0 0x8>; -+ interrupts = <2 16>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&smi_pins>; -+ brcm,smi-clock-source = <6>; -+ brcm,smi-clock-divisor = <4>; -+ dmas = <&dma 4>; -+ dma-names = "rx-tx"; -+ -+ status = "okay"; -+}; -+ -+smi_pins: smi_pins { -+ brcm,pins = <2 3 4 5 6 7 8 9 10 11 12 13 14 15>; -+ /* Alt 1: SMI */ -+ brcm,function = <5 5 5 5 5 5 5 5 5 5 5 5 5 5>; -+ /* /CS, /WE and /OE are pulled high, as they are -+ generally active low signals */ -+ brcm,pull = <2 2 2 2 2 2 0 0 0 0 0 0 0 0>; -+}; -+ ---- a/drivers/char/broadcom/Kconfig -+++ b/drivers/char/broadcom/Kconfig -@@ -41,3 +41,11 @@ config BCM2835_DEVGPIOMEM - on the 2835. Calling mmap(/dev/gpiomem) will map the GPIO - register page to the user's pointer. - -+config BCM2835_SMI_DEV -+ tristate "Character device driver for BCM2835 Secondary Memory Interface" -+ depends on BCM2835_SMI -+ default m -+ help -+ This driver provides a character device interface (ioctl + read/write) to -+ Broadcom's Secondary Memory interface. The low-level functionality is provided -+ by the SMI driver itself. ---- a/drivers/char/broadcom/Makefile -+++ b/drivers/char/broadcom/Makefile -@@ -3,4 +3,4 @@ obj-$(CONFIG_BCM2708_VCMEM) += vc_mem.o - obj-$(CONFIG_BCM_VC_SM) += vc_sm/ - - obj-$(CONFIG_BCM2835_DEVGPIOMEM)+= bcm2835-gpiomem.o -- -+obj-$(CONFIG_BCM2835_SMI_DEV) += bcm2835_smi_dev.o ---- /dev/null -+++ b/drivers/char/broadcom/bcm2835_smi_dev.c -@@ -0,0 +1,402 @@ -+/** -+ * Character device driver for Broadcom Secondary Memory Interface -+ * -+ * Written by Luke Wren -+ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions, and the following disclaimer, -+ * without modification. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The names of the above-listed copyright holders may not be used -+ * to endorse or promote products derived from this software without -+ * specific prior written permission. -+ * -+ * ALTERNATIVELY, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") version 2, as published by the Free -+ * Software Foundation. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS -+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, -+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#define DEVICE_NAME "bcm2835-smi-dev" -+#define DRIVER_NAME "smi-dev-bcm2835" -+#define DEVICE_MINOR 0 -+ -+static struct cdev bcm2835_smi_cdev; -+static dev_t bcm2835_smi_devid; -+static struct class *bcm2835_smi_class; -+static struct device *bcm2835_smi_dev; -+ -+struct bcm2835_smi_dev_instance { -+ struct device *dev; -+}; -+ -+static struct bcm2835_smi_instance *smi_inst; -+static struct bcm2835_smi_dev_instance *inst; -+ -+static const char *const ioctl_names[] = { -+ "READ_SETTINGS", -+ "WRITE_SETTINGS", -+ "ADDRESS" -+}; -+ -+/**************************************************************************** -+* -+* SMI chardev file ops -+* -+***************************************************************************/ -+static long -+bcm2835_smi_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ long ret = 0; -+ -+ dev_info(inst->dev, "serving ioctl..."); -+ -+ switch (cmd) { -+ case BCM2835_SMI_IOC_GET_SETTINGS:{ -+ struct smi_settings *settings; -+ -+ dev_info(inst->dev, "Reading SMI settings to user."); -+ settings = bcm2835_smi_get_settings_from_regs(smi_inst); -+ if (copy_to_user((void *)arg, settings, -+ sizeof(struct smi_settings))) -+ dev_err(inst->dev, "settings copy failed."); -+ break; -+ } -+ case BCM2835_SMI_IOC_WRITE_SETTINGS:{ -+ struct smi_settings *settings; -+ -+ dev_info(inst->dev, "Setting user's SMI settings."); -+ settings = bcm2835_smi_get_settings_from_regs(smi_inst); -+ if (copy_from_user(settings, (void *)arg, -+ sizeof(struct smi_settings))) -+ dev_err(inst->dev, "settings copy failed."); -+ else -+ bcm2835_smi_set_regs_from_settings(smi_inst); -+ break; -+ } -+ case BCM2835_SMI_IOC_ADDRESS: -+ dev_info(inst->dev, "SMI address set: 0x%02x", (int)arg); -+ bcm2835_smi_set_address(smi_inst, arg); -+ break; -+ default: -+ dev_err(inst->dev, "invalid ioctl cmd: %d", cmd); -+ ret = -ENOTTY; -+ break; -+ } -+ -+ return ret; -+} -+ -+static int bcm2835_smi_open(struct inode *inode, struct file *file) -+{ -+ int dev = iminor(inode); -+ -+ dev_dbg(inst->dev, "SMI device opened."); -+ -+ if (dev != DEVICE_MINOR) { -+ dev_err(inst->dev, -+ "bcm2835_smi_release: Unknown minor device: %d", -+ dev); -+ return -ENXIO; -+ } -+ -+ return 0; -+} -+ -+static int bcm2835_smi_release(struct inode *inode, struct file *file) -+{ -+ int dev = iminor(inode); -+ -+ if (dev != DEVICE_MINOR) { -+ dev_err(inst->dev, -+ "bcm2835_smi_release: Unknown minor device %d", dev); -+ return -ENXIO; -+ } -+ -+ return 0; -+} -+ -+static ssize_t dma_bounce_user( -+ enum dma_transfer_direction dma_dir, -+ char __user *user_ptr, -+ size_t count, -+ struct bcm2835_smi_bounce_info *bounce) -+{ -+ int chunk_size; -+ int chunk_no = 0; -+ int count_left = count; -+ -+ while (count_left) { -+ int rv; -+ void *buf; -+ -+ /* Wait for current chunk to complete: */ -+ if (down_timeout(&bounce->callback_sem, -+ msecs_to_jiffies(1000))) { -+ dev_err(inst->dev, "DMA bounce timed out"); -+ count -= (count_left); -+ break; -+ } -+ -+ if (bounce->callback_sem.count >= DMA_BOUNCE_BUFFER_COUNT - 1) -+ dev_err(inst->dev, "WARNING: Ring buffer overflow"); -+ chunk_size = count_left > DMA_BOUNCE_BUFFER_SIZE ? -+ DMA_BOUNCE_BUFFER_SIZE : count_left; -+ buf = bounce->buffer[chunk_no % DMA_BOUNCE_BUFFER_COUNT]; -+ if (dma_dir == DMA_DEV_TO_MEM) -+ rv = copy_to_user(user_ptr, buf, chunk_size); -+ else -+ rv = copy_from_user(buf, user_ptr, chunk_size); -+ if (rv) -+ dev_err(inst->dev, "copy_*_user() failed!: %d", rv); -+ user_ptr += chunk_size; -+ count_left -= chunk_size; -+ chunk_no++; -+ } -+ return count; -+} -+ -+static ssize_t -+bcm2835_read_file(struct file *f, char __user *user_ptr, -+ size_t count, loff_t *offs) -+{ -+ int odd_bytes; -+ -+ dev_dbg(inst->dev, "User reading %d bytes from SMI.", count); -+ /* We don't want to DMA a number of bytes % 4 != 0 (32 bit FIFO) */ -+ if (count > DMA_THRESHOLD_BYTES) -+ odd_bytes = count & 0x3; -+ else -+ odd_bytes = count; -+ count -= odd_bytes; -+ if (count) { -+ struct bcm2835_smi_bounce_info *bounce; -+ -+ count = bcm2835_smi_user_dma(smi_inst, -+ DMA_DEV_TO_MEM, user_ptr, count, -+ &bounce); -+ if (count) -+ count = dma_bounce_user(DMA_DEV_TO_MEM, user_ptr, -+ count, bounce); -+ } -+ if (odd_bytes) { -+ /* Read from FIFO directly if not using DMA */ -+ uint8_t buf[DMA_THRESHOLD_BYTES]; -+ -+ bcm2835_smi_read_buf(smi_inst, buf, odd_bytes); -+ if (copy_to_user(user_ptr, buf, odd_bytes)) -+ dev_err(inst->dev, "copy_to_user() failed."); -+ count += odd_bytes; -+ -+ } -+ return count; -+} -+ -+static ssize_t -+bcm2835_write_file(struct file *f, const char __user *user_ptr, -+ size_t count, loff_t *offs) -+{ -+ int odd_bytes; -+ -+ dev_dbg(inst->dev, "User writing %d bytes to SMI.", count); -+ if (count > DMA_THRESHOLD_BYTES) -+ odd_bytes = count & 0x3; -+ else -+ odd_bytes = count; -+ count -= odd_bytes; -+ if (count) { -+ struct bcm2835_smi_bounce_info *bounce; -+ -+ count = bcm2835_smi_user_dma(smi_inst, -+ DMA_MEM_TO_DEV, (char __user *)user_ptr, count, -+ &bounce); -+ if (count) -+ count = dma_bounce_user(DMA_MEM_TO_DEV, -+ (char __user *)user_ptr, -+ count, bounce); -+ } -+ if (odd_bytes) { -+ uint8_t buf[DMA_THRESHOLD_BYTES]; -+ -+ if (copy_from_user(buf, user_ptr, odd_bytes)) -+ dev_err(inst->dev, "copy_from_user() failed."); -+ else -+ bcm2835_smi_write_buf(smi_inst, buf, odd_bytes); -+ count += odd_bytes; -+ } -+ return count; -+} -+ -+static const struct file_operations -+bcm2835_smi_fops = { -+ .owner = THIS_MODULE, -+ .unlocked_ioctl = bcm2835_smi_ioctl, -+ .open = bcm2835_smi_open, -+ .release = bcm2835_smi_release, -+ .read = bcm2835_read_file, -+ .write = bcm2835_write_file, -+}; -+ -+ -+/**************************************************************************** -+* -+* bcm2835_smi_probe - called when the driver is loaded. -+* -+***************************************************************************/ -+ -+static int bcm2835_smi_dev_probe(struct platform_device *pdev) -+{ -+ int err; -+ void *ptr_err; -+ struct device *dev = &pdev->dev; -+ struct device_node *node = dev->of_node, *smi_node; -+ -+ if (!node) { -+ dev_err(dev, "No device tree node supplied!"); -+ return -EINVAL; -+ } -+ -+ smi_node = of_parse_phandle(node, "smi_handle", 0); -+ -+ if (!smi_node) { -+ dev_err(dev, "No such property: smi_handle"); -+ return -ENXIO; -+ } -+ -+ smi_inst = bcm2835_smi_get(smi_node); -+ -+ if (!smi_inst) -+ return -EPROBE_DEFER; -+ -+ /* Allocate buffers and instance data */ -+ -+ inst = devm_kzalloc(dev, sizeof(*inst), GFP_KERNEL); -+ -+ if (!inst) -+ return -ENOMEM; -+ -+ inst->dev = dev; -+ -+ /* Create character device entries */ -+ -+ err = alloc_chrdev_region(&bcm2835_smi_devid, -+ DEVICE_MINOR, 1, DEVICE_NAME); -+ if (err != 0) { -+ dev_err(inst->dev, "unable to allocate device number"); -+ return -ENOMEM; -+ } -+ cdev_init(&bcm2835_smi_cdev, &bcm2835_smi_fops); -+ bcm2835_smi_cdev.owner = THIS_MODULE; -+ err = cdev_add(&bcm2835_smi_cdev, bcm2835_smi_devid, 1); -+ if (err != 0) { -+ dev_err(inst->dev, "unable to register device"); -+ err = -ENOMEM; -+ goto failed_cdev_add; -+ } -+ -+ /* Create sysfs entries */ -+ -+ bcm2835_smi_class = class_create(THIS_MODULE, DEVICE_NAME); -+ ptr_err = bcm2835_smi_class; -+ if (IS_ERR(ptr_err)) -+ goto failed_class_create; -+ -+ bcm2835_smi_dev = device_create(bcm2835_smi_class, NULL, -+ bcm2835_smi_devid, NULL, -+ "smi"); -+ ptr_err = bcm2835_smi_dev; -+ if (IS_ERR(ptr_err)) -+ goto failed_device_create; -+ -+ dev_info(inst->dev, "initialised"); -+ -+ return 0; -+ -+failed_device_create: -+ class_destroy(bcm2835_smi_class); -+failed_class_create: -+ cdev_del(&bcm2835_smi_cdev); -+ err = PTR_ERR(ptr_err); -+failed_cdev_add: -+ unregister_chrdev_region(bcm2835_smi_devid, 1); -+ dev_err(dev, "could not load bcm2835_smi_dev"); -+ return err; -+} -+ -+/**************************************************************************** -+* -+* bcm2835_smi_remove - called when the driver is unloaded. -+* -+***************************************************************************/ -+ -+static int bcm2835_smi_dev_remove(struct platform_device *pdev) -+{ -+ device_destroy(bcm2835_smi_class, bcm2835_smi_devid); -+ class_destroy(bcm2835_smi_class); -+ cdev_del(&bcm2835_smi_cdev); -+ unregister_chrdev_region(bcm2835_smi_devid, 1); -+ -+ dev_info(inst->dev, "SMI character dev removed - OK"); -+ return 0; -+} -+ -+/**************************************************************************** -+* -+* Register the driver with device tree -+* -+***************************************************************************/ -+ -+static const struct of_device_id bcm2835_smi_dev_of_match[] = { -+ {.compatible = "brcm,bcm2835-smi-dev",}, -+ { /* sentinel */ }, -+}; -+ -+MODULE_DEVICE_TABLE(of, bcm2835_smi_dev_of_match); -+ -+static struct platform_driver bcm2835_smi_dev_driver = { -+ .probe = bcm2835_smi_dev_probe, -+ .remove = bcm2835_smi_dev_remove, -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = bcm2835_smi_dev_of_match, -+ }, -+}; -+ -+module_platform_driver(bcm2835_smi_dev_driver); -+ -+MODULE_ALIAS("platform:smi-dev-bcm2835"); -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION( -+ "Character device driver for BCM2835's secondary memory interface"); -+MODULE_AUTHOR("Luke Wren "); ---- a/drivers/misc/Kconfig -+++ b/drivers/misc/Kconfig -@@ -10,6 +10,14 @@ config SENSORS_LIS3LV02D - select INPUT_POLLDEV - default n - -+config BCM2835_SMI -+ tristate "Broadcom 283x Secondary Memory Interface driver" -+ depends on ARCH_BCM2835 -+ default m -+ help -+ Driver for enabling and using Broadcom's Secondary/Slow Memory Interface. -+ Appears as /dev/bcm2835_smi. For ioctl interface see drivers/misc/bcm2835_smi.h -+ - config AD525X_DPOT - tristate "Analog Devices Digital Potentiometers" - depends on (I2C || SPI) && SYSFS ---- a/drivers/misc/Makefile -+++ b/drivers/misc/Makefile -@@ -9,6 +9,7 @@ obj-$(CONFIG_AD525X_DPOT_SPI) += ad525x_ - obj-$(CONFIG_INTEL_MID_PTI) += pti.o - obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o - obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o -+obj-$(CONFIG_BCM2835_SMI) += bcm2835_smi.o - obj-$(CONFIG_DUMMY_IRQ) += dummy-irq.o - obj-$(CONFIG_ICS932S401) += ics932s401.o - obj-$(CONFIG_LKDTM) += lkdtm.o ---- /dev/null -+++ b/drivers/misc/bcm2835_smi.c -@@ -0,0 +1,985 @@ -+/** -+ * Broadcom Secondary Memory Interface driver -+ * -+ * Written by Luke Wren -+ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions, and the following disclaimer, -+ * without modification. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The names of the above-listed copyright holders may not be used -+ * to endorse or promote products derived from this software without -+ * specific prior written permission. -+ * -+ * ALTERNATIVELY, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") version 2, as published by the Free -+ * Software Foundation. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS -+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, -+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define BCM2835_SMI_IMPLEMENTATION -+#include -+ -+#define DRIVER_NAME "smi-bcm2835" -+ -+#define N_PAGES_FROM_BYTES(n) ((n + PAGE_SIZE-1) / PAGE_SIZE) -+ -+#define DMA_WRITE_TO_MEM true -+#define DMA_READ_FROM_MEM false -+ -+struct bcm2835_smi_instance { -+ struct device *dev; -+ struct smi_settings settings; -+ __iomem void *smi_regs_ptr, *cm_smi_regs_ptr; -+ dma_addr_t smi_regs_busaddr; -+ -+ struct dma_chan *dma_chan; -+ struct dma_slave_config dma_config; -+ -+ struct bcm2835_smi_bounce_info bounce; -+ -+ struct scatterlist buffer_sgl; -+ -+ int clock_source; -+ int clock_divisor; -+ -+ /* Sometimes we are called into in an atomic context (e.g. by -+ JFFS2 + MTD) so we can't use a mutex */ -+ spinlock_t transaction_lock; -+}; -+ -+/**************************************************************************** -+* -+* SMI clock manager setup -+* -+***************************************************************************/ -+ -+static inline void write_smi_cm_reg(struct bcm2835_smi_instance *inst, -+ u32 val, unsigned reg) -+{ -+ writel(CM_PWD | val, inst->cm_smi_regs_ptr + reg); -+} -+ -+static inline u32 read_smi_cm_reg(struct bcm2835_smi_instance *inst, -+ unsigned reg) -+{ -+ return readl(inst->cm_smi_regs_ptr + reg); -+} -+ -+static void smi_setup_clock(struct bcm2835_smi_instance *inst) -+{ -+ dev_dbg(inst->dev, "Setting up clock..."); -+ /* Disable SMI clock and wait for it to stop. */ -+ write_smi_cm_reg(inst, 0, CM_SMI_CTL); -+ while (read_smi_cm_reg(inst, CM_SMI_CTL) & CM_SMI_CTL_BUSY) -+ ; -+ -+ write_smi_cm_reg(inst, (inst->clock_divisor << CM_SMI_DIV_DIVI_OFFS), -+ CM_SMI_DIV); -+ write_smi_cm_reg(inst, (inst->clock_source << CM_SMI_CTL_SRC_OFFS), -+ CM_SMI_CTL); -+ -+ /* Enable the clock */ -+ write_smi_cm_reg(inst, (inst->clock_source << CM_SMI_CTL_SRC_OFFS) | -+ CM_SMI_CTL_ENAB, CM_SMI_CTL); -+} -+ -+/**************************************************************************** -+* -+* SMI peripheral setup -+* -+***************************************************************************/ -+ -+static inline void write_smi_reg(struct bcm2835_smi_instance *inst, -+ u32 val, unsigned reg) -+{ -+ writel(val, inst->smi_regs_ptr + reg); -+} -+ -+static inline u32 read_smi_reg(struct bcm2835_smi_instance *inst, unsigned reg) -+{ -+ return readl(inst->smi_regs_ptr + reg); -+} -+ -+/* Token-paste macro for e.g SMIDSR_RSTROBE -> value of SMIDSR_RSTROBE_MASK */ -+#define _CONCAT(x, y) x##y -+#define CONCAT(x, y) _CONCAT(x, y) -+ -+#define SET_BIT_FIELD(dest, field, bits) ((dest) = \ -+ ((dest) & ~CONCAT(field, _MASK)) | (((bits) << CONCAT(field, _OFFS))& \ -+ CONCAT(field, _MASK))) -+#define GET_BIT_FIELD(src, field) (((src) & \ -+ CONCAT(field, _MASK)) >> CONCAT(field, _OFFS)) -+ -+static void smi_dump_context_labelled(struct bcm2835_smi_instance *inst, -+ const char *label) -+{ -+ dev_err(inst->dev, "SMI context dump: %s", label); -+ dev_err(inst->dev, "SMICS: 0x%08x", read_smi_reg(inst, SMICS)); -+ dev_err(inst->dev, "SMIL: 0x%08x", read_smi_reg(inst, SMIL)); -+ dev_err(inst->dev, "SMIDSR: 0x%08x", read_smi_reg(inst, SMIDSR0)); -+ dev_err(inst->dev, "SMIDSW: 0x%08x", read_smi_reg(inst, SMIDSW0)); -+ dev_err(inst->dev, "SMIDC: 0x%08x", read_smi_reg(inst, SMIDC)); -+ dev_err(inst->dev, "SMIFD: 0x%08x", read_smi_reg(inst, SMIFD)); -+ dev_err(inst->dev, " "); -+} -+ -+static inline void smi_dump_context(struct bcm2835_smi_instance *inst) -+{ -+ smi_dump_context_labelled(inst, ""); -+} -+ -+static void smi_get_default_settings(struct bcm2835_smi_instance *inst) -+{ -+ struct smi_settings *settings = &inst->settings; -+ -+ settings->data_width = SMI_WIDTH_16BIT; -+ settings->pack_data = true; -+ -+ settings->read_setup_time = 1; -+ settings->read_hold_time = 1; -+ settings->read_pace_time = 1; -+ settings->read_strobe_time = 3; -+ -+ settings->write_setup_time = settings->read_setup_time; -+ settings->write_hold_time = settings->read_hold_time; -+ settings->write_pace_time = settings->read_pace_time; -+ settings->write_strobe_time = settings->read_strobe_time; -+ -+ settings->dma_enable = true; -+ settings->dma_passthrough_enable = false; -+ settings->dma_read_thresh = 0x01; -+ settings->dma_write_thresh = 0x3f; -+ settings->dma_panic_read_thresh = 0x20; -+ settings->dma_panic_write_thresh = 0x20; -+} -+ -+void bcm2835_smi_set_regs_from_settings(struct bcm2835_smi_instance *inst) -+{ -+ struct smi_settings *settings = &inst->settings; -+ int smidsr_temp = 0, smidsw_temp = 0, smics_temp, -+ smidcs_temp, smidc_temp = 0; -+ -+ spin_lock(&inst->transaction_lock); -+ -+ /* temporarily disable the peripheral: */ -+ smics_temp = read_smi_reg(inst, SMICS); -+ write_smi_reg(inst, 0, SMICS); -+ smidcs_temp = read_smi_reg(inst, SMIDCS); -+ write_smi_reg(inst, 0, SMIDCS); -+ -+ if (settings->pack_data) -+ smics_temp |= SMICS_PXLDAT; -+ else -+ smics_temp &= ~SMICS_PXLDAT; -+ -+ SET_BIT_FIELD(smidsr_temp, SMIDSR_RWIDTH, settings->data_width); -+ SET_BIT_FIELD(smidsr_temp, SMIDSR_RSETUP, settings->read_setup_time); -+ SET_BIT_FIELD(smidsr_temp, SMIDSR_RHOLD, settings->read_hold_time); -+ SET_BIT_FIELD(smidsr_temp, SMIDSR_RPACE, settings->read_pace_time); -+ SET_BIT_FIELD(smidsr_temp, SMIDSR_RSTROBE, settings->read_strobe_time); -+ write_smi_reg(inst, smidsr_temp, SMIDSR0); -+ -+ SET_BIT_FIELD(smidsw_temp, SMIDSW_WWIDTH, settings->data_width); -+ if (settings->data_width == SMI_WIDTH_8BIT) -+ smidsw_temp |= SMIDSW_WSWAP; -+ else -+ smidsw_temp &= ~SMIDSW_WSWAP; -+ SET_BIT_FIELD(smidsw_temp, SMIDSW_WSETUP, settings->write_setup_time); -+ SET_BIT_FIELD(smidsw_temp, SMIDSW_WHOLD, settings->write_hold_time); -+ SET_BIT_FIELD(smidsw_temp, SMIDSW_WPACE, settings->write_pace_time); -+ SET_BIT_FIELD(smidsw_temp, SMIDSW_WSTROBE, -+ settings->write_strobe_time); -+ write_smi_reg(inst, smidsw_temp, SMIDSW0); -+ -+ SET_BIT_FIELD(smidc_temp, SMIDC_REQR, settings->dma_read_thresh); -+ SET_BIT_FIELD(smidc_temp, SMIDC_REQW, settings->dma_write_thresh); -+ SET_BIT_FIELD(smidc_temp, SMIDC_PANICR, -+ settings->dma_panic_read_thresh); -+ SET_BIT_FIELD(smidc_temp, SMIDC_PANICW, -+ settings->dma_panic_write_thresh); -+ if (settings->dma_passthrough_enable) { -+ smidc_temp |= SMIDC_DMAP; -+ smidsr_temp |= SMIDSR_RDREQ; -+ write_smi_reg(inst, smidsr_temp, SMIDSR0); -+ smidsw_temp |= SMIDSW_WDREQ; -+ write_smi_reg(inst, smidsw_temp, SMIDSW0); -+ } else -+ smidc_temp &= ~SMIDC_DMAP; -+ if (settings->dma_enable) -+ smidc_temp |= SMIDC_DMAEN; -+ else -+ smidc_temp &= ~SMIDC_DMAEN; -+ -+ write_smi_reg(inst, smidc_temp, SMIDC); -+ -+ /* re-enable (if was previously enabled) */ -+ write_smi_reg(inst, smics_temp, SMICS); -+ write_smi_reg(inst, smidcs_temp, SMIDCS); -+ -+ spin_unlock(&inst->transaction_lock); -+} -+EXPORT_SYMBOL(bcm2835_smi_set_regs_from_settings); -+ -+struct smi_settings *bcm2835_smi_get_settings_from_regs -+ (struct bcm2835_smi_instance *inst) -+{ -+ struct smi_settings *settings = &inst->settings; -+ int smidsr, smidsw, smidc; -+ -+ spin_lock(&inst->transaction_lock); -+ -+ smidsr = read_smi_reg(inst, SMIDSR0); -+ smidsw = read_smi_reg(inst, SMIDSW0); -+ smidc = read_smi_reg(inst, SMIDC); -+ -+ settings->pack_data = (read_smi_reg(inst, SMICS) & SMICS_PXLDAT) ? -+ true : false; -+ -+ settings->data_width = GET_BIT_FIELD(smidsr, SMIDSR_RWIDTH); -+ settings->read_setup_time = GET_BIT_FIELD(smidsr, SMIDSR_RSETUP); -+ settings->read_hold_time = GET_BIT_FIELD(smidsr, SMIDSR_RHOLD); -+ settings->read_pace_time = GET_BIT_FIELD(smidsr, SMIDSR_RPACE); -+ settings->read_strobe_time = GET_BIT_FIELD(smidsr, SMIDSR_RSTROBE); -+ -+ settings->write_setup_time = GET_BIT_FIELD(smidsw, SMIDSW_WSETUP); -+ settings->write_hold_time = GET_BIT_FIELD(smidsw, SMIDSW_WHOLD); -+ settings->write_pace_time = GET_BIT_FIELD(smidsw, SMIDSW_WPACE); -+ settings->write_strobe_time = GET_BIT_FIELD(smidsw, SMIDSW_WSTROBE); -+ -+ settings->dma_read_thresh = GET_BIT_FIELD(smidc, SMIDC_REQR); -+ settings->dma_write_thresh = GET_BIT_FIELD(smidc, SMIDC_REQW); -+ settings->dma_panic_read_thresh = GET_BIT_FIELD(smidc, SMIDC_PANICR); -+ settings->dma_panic_write_thresh = GET_BIT_FIELD(smidc, SMIDC_PANICW); -+ settings->dma_passthrough_enable = (smidc & SMIDC_DMAP) ? true : false; -+ settings->dma_enable = (smidc & SMIDC_DMAEN) ? true : false; -+ -+ spin_unlock(&inst->transaction_lock); -+ -+ return settings; -+} -+EXPORT_SYMBOL(bcm2835_smi_get_settings_from_regs); -+ -+static inline void smi_set_address(struct bcm2835_smi_instance *inst, -+ unsigned int address) -+{ -+ int smia_temp = 0, smida_temp = 0; -+ -+ SET_BIT_FIELD(smia_temp, SMIA_ADDR, address); -+ SET_BIT_FIELD(smida_temp, SMIDA_ADDR, address); -+ -+ /* Write to both address registers - user doesn't care whether we're -+ doing programmed or direct transfers. */ -+ write_smi_reg(inst, smia_temp, SMIA); -+ write_smi_reg(inst, smida_temp, SMIDA); -+} -+ -+static void smi_setup_regs(struct bcm2835_smi_instance *inst) -+{ -+ -+ dev_dbg(inst->dev, "Initialising SMI registers..."); -+ /* Disable the peripheral if already enabled */ -+ write_smi_reg(inst, 0, SMICS); -+ write_smi_reg(inst, 0, SMIDCS); -+ -+ smi_get_default_settings(inst); -+ bcm2835_smi_set_regs_from_settings(inst); -+ smi_set_address(inst, 0); -+ -+ write_smi_reg(inst, read_smi_reg(inst, SMICS) | SMICS_ENABLE, SMICS); -+ write_smi_reg(inst, read_smi_reg(inst, SMIDCS) | SMIDCS_ENABLE, -+ SMIDCS); -+} -+ -+/**************************************************************************** -+* -+* Low-level SMI access functions -+* Other modules should use the exported higher-level functions e.g. -+* bcm2835_smi_write_buf() unless they have a good reason to use these -+* -+***************************************************************************/ -+ -+static inline uint32_t smi_read_single_word(struct bcm2835_smi_instance *inst) -+{ -+ int timeout = 0; -+ -+ write_smi_reg(inst, SMIDCS_ENABLE, SMIDCS); -+ write_smi_reg(inst, SMIDCS_ENABLE | SMIDCS_START, SMIDCS); -+ /* Make sure things happen in the right order...*/ -+ mb(); -+ while (!(read_smi_reg(inst, SMIDCS) & SMIDCS_DONE) && -+ ++timeout < 10000) -+ ; -+ if (timeout < 10000) -+ return read_smi_reg(inst, SMIDD); -+ -+ dev_err(inst->dev, -+ "SMI direct read timed out (is the clock set up correctly?)"); -+ return 0; -+} -+ -+static inline void smi_write_single_word(struct bcm2835_smi_instance *inst, -+ uint32_t data) -+{ -+ int timeout = 0; -+ -+ write_smi_reg(inst, SMIDCS_ENABLE | SMIDCS_WRITE, SMIDCS); -+ write_smi_reg(inst, data, SMIDD); -+ write_smi_reg(inst, SMIDCS_ENABLE | SMIDCS_WRITE | SMIDCS_START, -+ SMIDCS); -+ -+ while (!(read_smi_reg(inst, SMIDCS) & SMIDCS_DONE) && -+ ++timeout < 10000) -+ ; -+ if (timeout >= 10000) -+ dev_err(inst->dev, -+ "SMI direct write timed out (is the clock set up correctly?)"); -+} -+ -+/* Initiates a programmed read into the read FIFO. It is up to the caller to -+ * read data from the FIFO - either via paced DMA transfer, -+ * or polling SMICS_RXD to check whether data is available. -+ * SMICS_ACTIVE will go low upon completion. */ -+static void smi_init_programmed_read(struct bcm2835_smi_instance *inst, -+ int num_transfers) -+{ -+ int smics_temp; -+ -+ /* Disable the peripheral: */ -+ smics_temp = read_smi_reg(inst, SMICS) & ~(SMICS_ENABLE | SMICS_WRITE); -+ write_smi_reg(inst, smics_temp, SMICS); -+ while (read_smi_reg(inst, SMICS) & SMICS_ENABLE) -+ ; -+ -+ /* Program the transfer count: */ -+ write_smi_reg(inst, num_transfers, SMIL); -+ -+ /* re-enable and start: */ -+ smics_temp |= SMICS_ENABLE; -+ write_smi_reg(inst, smics_temp, SMICS); -+ smics_temp |= SMICS_CLEAR; -+ /* Just to be certain: */ -+ mb(); -+ while (read_smi_reg(inst, SMICS) & SMICS_ACTIVE) -+ ; -+ write_smi_reg(inst, smics_temp, SMICS); -+ smics_temp |= SMICS_START; -+ write_smi_reg(inst, smics_temp, SMICS); -+} -+ -+/* Initiates a programmed write sequence, using data from the write FIFO. -+ * It is up to the caller to initiate a DMA transfer before calling, -+ * or use another method to keep the write FIFO topped up. -+ * SMICS_ACTIVE will go low upon completion. -+ */ -+static void smi_init_programmed_write(struct bcm2835_smi_instance *inst, -+ int num_transfers) -+{ -+ int smics_temp; -+ -+ /* Disable the peripheral: */ -+ smics_temp = read_smi_reg(inst, SMICS) & ~SMICS_ENABLE; -+ write_smi_reg(inst, smics_temp, SMICS); -+ while (read_smi_reg(inst, SMICS) & SMICS_ENABLE) -+ ; -+ -+ /* Program the transfer count: */ -+ write_smi_reg(inst, num_transfers, SMIL); -+ -+ /* setup, re-enable and start: */ -+ smics_temp |= SMICS_WRITE | SMICS_ENABLE; -+ write_smi_reg(inst, smics_temp, SMICS); -+ smics_temp |= SMICS_START; -+ write_smi_reg(inst, smics_temp, SMICS); -+} -+ -+/* Initiate a read and then poll FIFO for data, reading out as it appears. */ -+static void smi_read_fifo(struct bcm2835_smi_instance *inst, -+ uint32_t *dest, int n_bytes) -+{ -+ if (read_smi_reg(inst, SMICS) & SMICS_RXD) { -+ smi_dump_context_labelled(inst, -+ "WARNING: read FIFO not empty at start of read call."); -+ while (read_smi_reg(inst, SMICS)) -+ ; -+ } -+ -+ /* Dispatch the read: */ -+ if (inst->settings.data_width == SMI_WIDTH_8BIT) -+ smi_init_programmed_read(inst, n_bytes); -+ else if (inst->settings.data_width == SMI_WIDTH_16BIT) -+ smi_init_programmed_read(inst, n_bytes / 2); -+ else { -+ dev_err(inst->dev, "Unsupported data width for read."); -+ return; -+ } -+ -+ /* Poll FIFO to keep it empty */ -+ while (!(read_smi_reg(inst, SMICS) & SMICS_DONE)) -+ if (read_smi_reg(inst, SMICS) & SMICS_RXD) -+ *dest++ = read_smi_reg(inst, SMID); -+ -+ /* Ensure that the FIFO is emptied */ -+ if (read_smi_reg(inst, SMICS) & SMICS_RXD) { -+ int fifo_count; -+ -+ fifo_count = GET_BIT_FIELD(read_smi_reg(inst, SMIFD), -+ SMIFD_FCNT); -+ while (fifo_count--) -+ *dest++ = read_smi_reg(inst, SMID); -+ } -+ -+ if (!(read_smi_reg(inst, SMICS) & SMICS_DONE)) -+ smi_dump_context_labelled(inst, -+ "WARNING: transaction finished but done bit not set."); -+ -+ if (read_smi_reg(inst, SMICS) & SMICS_RXD) -+ smi_dump_context_labelled(inst, -+ "WARNING: read FIFO not empty at end of read call."); -+ -+} -+ -+/* Initiate a write, and then keep the FIFO topped up. */ -+static void smi_write_fifo(struct bcm2835_smi_instance *inst, -+ uint32_t *src, int n_bytes) -+{ -+ int i, timeout = 0; -+ -+ /* Empty FIFOs if not already so */ -+ if (!(read_smi_reg(inst, SMICS) & SMICS_TXE)) { -+ smi_dump_context_labelled(inst, -+ "WARNING: write fifo not empty at start of write call."); -+ write_smi_reg(inst, read_smi_reg(inst, SMICS) | SMICS_CLEAR, -+ SMICS); -+ } -+ -+ /* Initiate the transfer */ -+ if (inst->settings.data_width == SMI_WIDTH_8BIT) -+ smi_init_programmed_write(inst, n_bytes); -+ else if (inst->settings.data_width == SMI_WIDTH_16BIT) -+ smi_init_programmed_write(inst, n_bytes / 2); -+ else { -+ dev_err(inst->dev, "Unsupported data width for write."); -+ return; -+ } -+ /* Fill the FIFO: */ -+ for (i = 0; i < (n_bytes - 1) / 4 + 1; ++i) { -+ while (!(read_smi_reg(inst, SMICS) & SMICS_TXD)) -+ ; -+ write_smi_reg(inst, *src++, SMID); -+ } -+ /* Busy wait... */ -+ while (!(read_smi_reg(inst, SMICS) & SMICS_DONE) && ++timeout < -+ 1000000) -+ ; -+ if (timeout >= 1000000) -+ smi_dump_context_labelled(inst, -+ "Timed out on write operation!"); -+ if (!(read_smi_reg(inst, SMICS) & SMICS_TXE)) -+ smi_dump_context_labelled(inst, -+ "WARNING: FIFO not empty at end of write operation."); -+} -+ -+/**************************************************************************** -+* -+* SMI DMA operations -+* -+***************************************************************************/ -+ -+/* Disable SMI and put it into the correct direction before doing DMA setup. -+ Stops spurious DREQs during setup. Peripheral is re-enabled by init_*() */ -+static void smi_disable(struct bcm2835_smi_instance *inst, -+ enum dma_transfer_direction direction) -+{ -+ int smics_temp = read_smi_reg(inst, SMICS) & ~SMICS_ENABLE; -+ -+ if (direction == DMA_DEV_TO_MEM) -+ smics_temp &= ~SMICS_WRITE; -+ else -+ smics_temp |= SMICS_WRITE; -+ write_smi_reg(inst, smics_temp, SMICS); -+ while (read_smi_reg(inst, SMICS) & SMICS_ACTIVE) -+ ; -+} -+ -+static struct scatterlist *smi_scatterlist_from_buffer( -+ struct bcm2835_smi_instance *inst, -+ dma_addr_t buf, -+ size_t len, -+ struct scatterlist *sg) -+{ -+ sg_init_table(sg, 1); -+ sg_dma_address(sg) = buf; -+ sg_dma_len(sg) = len; -+ return sg; -+} -+ -+static void smi_dma_callback_user_copy(void *param) -+{ -+ /* Notify the bottom half that a chunk is ready for user copy */ -+ struct bcm2835_smi_instance *inst = -+ (struct bcm2835_smi_instance *)param; -+ -+ up(&inst->bounce.callback_sem); -+} -+ -+/* Creates a descriptor, assigns the given callback, and submits the -+ descriptor to dmaengine. Does not block - can queue up multiple -+ descriptors and then wait for them all to complete. -+ sg_len is the number of control blocks, NOT the number of bytes. -+ dir can be DMA_MEM_TO_DEV or DMA_DEV_TO_MEM. -+ callback can be NULL - in this case it is not called. */ -+static inline struct dma_async_tx_descriptor *smi_dma_submit_sgl( -+ struct bcm2835_smi_instance *inst, -+ struct scatterlist *sgl, -+ size_t sg_len, -+ enum dma_transfer_direction dir, -+ dma_async_tx_callback callback) -+{ -+ struct dma_async_tx_descriptor *desc; -+ -+ desc = dmaengine_prep_slave_sg(inst->dma_chan, -+ sgl, -+ sg_len, -+ dir, -+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK | -+ DMA_PREP_FENCE); -+ if (!desc) { -+ dev_err(inst->dev, "read_sgl: dma slave preparation failed!"); -+ write_smi_reg(inst, read_smi_reg(inst, SMICS) & ~SMICS_ACTIVE, -+ SMICS); -+ while (read_smi_reg(inst, SMICS) & SMICS_ACTIVE) -+ cpu_relax(); -+ write_smi_reg(inst, read_smi_reg(inst, SMICS) | SMICS_ACTIVE, -+ SMICS); -+ return NULL; -+ } -+ desc->callback = callback; -+ desc->callback_param = inst; -+ if (dmaengine_submit(desc) < 0) -+ return NULL; -+ return desc; -+} -+ -+/* NB this function blocks until the transfer is complete */ -+static void -+smi_dma_read_sgl(struct bcm2835_smi_instance *inst, -+ struct scatterlist *sgl, size_t sg_len, size_t n_bytes) -+{ -+ struct dma_async_tx_descriptor *desc; -+ -+ /* Disable SMI and set to read before dispatching DMA - if SMI is in -+ * write mode and TX fifo is empty, it will generate a DREQ which may -+ * cause the read DMA to complete before the SMI read command is even -+ * dispatched! We want to dispatch DMA before SMI read so that reading -+ * is gapless, for logic analyser. -+ */ -+ -+ smi_disable(inst, DMA_DEV_TO_MEM); -+ -+ desc = smi_dma_submit_sgl(inst, sgl, sg_len, DMA_DEV_TO_MEM, NULL); -+ dma_async_issue_pending(inst->dma_chan); -+ -+ if (inst->settings.data_width == SMI_WIDTH_8BIT) -+ smi_init_programmed_read(inst, n_bytes); -+ else -+ smi_init_programmed_read(inst, n_bytes / 2); -+ -+ if (dma_wait_for_async_tx(desc) == DMA_ERROR) -+ smi_dump_context_labelled(inst, "DMA timeout!"); -+} -+ -+static void -+smi_dma_write_sgl(struct bcm2835_smi_instance *inst, -+ struct scatterlist *sgl, size_t sg_len, size_t n_bytes) -+{ -+ struct dma_async_tx_descriptor *desc; -+ -+ if (inst->settings.data_width == SMI_WIDTH_8BIT) -+ smi_init_programmed_write(inst, n_bytes); -+ else -+ smi_init_programmed_write(inst, n_bytes / 2); -+ -+ desc = smi_dma_submit_sgl(inst, sgl, sg_len, DMA_MEM_TO_DEV, NULL); -+ dma_async_issue_pending(inst->dma_chan); -+ -+ if (dma_wait_for_async_tx(desc) == DMA_ERROR) -+ smi_dump_context_labelled(inst, "DMA timeout!"); -+ else -+ /* Wait for SMI to finish our writes */ -+ while (!(read_smi_reg(inst, SMICS) & SMICS_DONE)) -+ cpu_relax(); -+} -+ -+ssize_t bcm2835_smi_user_dma( -+ struct bcm2835_smi_instance *inst, -+ enum dma_transfer_direction dma_dir, -+ char __user *user_ptr, size_t count, -+ struct bcm2835_smi_bounce_info **bounce) -+{ -+ int chunk_no = 0, chunk_size, count_left = count; -+ struct scatterlist *sgl; -+ void (*init_trans_func)(struct bcm2835_smi_instance *, int); -+ -+ spin_lock(&inst->transaction_lock); -+ -+ if (dma_dir == DMA_DEV_TO_MEM) -+ init_trans_func = smi_init_programmed_read; -+ else -+ init_trans_func = smi_init_programmed_write; -+ -+ smi_disable(inst, dma_dir); -+ -+ sema_init(&inst->bounce.callback_sem, 0); -+ if (bounce) -+ *bounce = &inst->bounce; -+ while (count_left) { -+ chunk_size = count_left > DMA_BOUNCE_BUFFER_SIZE ? -+ DMA_BOUNCE_BUFFER_SIZE : count_left; -+ if (chunk_size == DMA_BOUNCE_BUFFER_SIZE) { -+ sgl = -+ &inst->bounce.sgl[chunk_no % DMA_BOUNCE_BUFFER_COUNT]; -+ } else { -+ sgl = smi_scatterlist_from_buffer( -+ inst, -+ inst->bounce.phys[ -+ chunk_no % DMA_BOUNCE_BUFFER_COUNT], -+ chunk_size, -+ &inst->buffer_sgl); -+ } -+ -+ if (!smi_dma_submit_sgl(inst, sgl, 1, dma_dir, -+ smi_dma_callback_user_copy -+ )) { -+ dev_err(inst->dev, "sgl submit failed"); -+ count = 0; -+ goto out; -+ } -+ count_left -= chunk_size; -+ chunk_no++; -+ } -+ dma_async_issue_pending(inst->dma_chan); -+ -+ if (inst->settings.data_width == SMI_WIDTH_8BIT) -+ init_trans_func(inst, count); -+ else if (inst->settings.data_width == SMI_WIDTH_16BIT) -+ init_trans_func(inst, count / 2); -+out: -+ spin_unlock(&inst->transaction_lock); -+ return count; -+} -+EXPORT_SYMBOL(bcm2835_smi_user_dma); -+ -+ -+/**************************************************************************** -+* -+* High level buffer transfer functions - for use by other drivers -+* -+***************************************************************************/ -+ -+/* Buffer must be physically contiguous - i.e. kmalloc, not vmalloc! */ -+void bcm2835_smi_write_buf( -+ struct bcm2835_smi_instance *inst, -+ const void *buf, size_t n_bytes) -+{ -+ int odd_bytes = n_bytes & 0x3; -+ -+ n_bytes -= odd_bytes; -+ -+ spin_lock(&inst->transaction_lock); -+ -+ if (n_bytes > DMA_THRESHOLD_BYTES) { -+ dma_addr_t phy_addr = dma_map_single( -+ inst->dev, -+ (void *)buf, -+ n_bytes, -+ DMA_MEM_TO_DEV); -+ struct scatterlist *sgl = -+ smi_scatterlist_from_buffer(inst, phy_addr, n_bytes, -+ &inst->buffer_sgl); -+ -+ if (!sgl) { -+ smi_dump_context_labelled(inst, -+ "Error: could not create scatterlist for write!"); -+ goto out; -+ } -+ smi_dma_write_sgl(inst, sgl, 1, n_bytes); -+ -+ dma_unmap_single -+ (inst->dev, phy_addr, n_bytes, DMA_MEM_TO_DEV); -+ } else if (n_bytes) { -+ smi_write_fifo(inst, (uint32_t *) buf, n_bytes); -+ } -+ buf += n_bytes; -+ -+ if (inst->settings.data_width == SMI_WIDTH_8BIT) { -+ while (odd_bytes--) -+ smi_write_single_word(inst, *(uint8_t *) (buf++)); -+ } else { -+ while (odd_bytes >= 2) { -+ smi_write_single_word(inst, *(uint16_t *)buf); -+ buf += 2; -+ odd_bytes -= 2; -+ } -+ if (odd_bytes) { -+ /* Reading an odd number of bytes on a 16 bit bus is -+ a user bug. It's kinder to fail early and tell them -+ than to e.g. transparently give them the bottom byte -+ of a 16 bit transfer. */ -+ dev_err(inst->dev, -+ "WARNING: odd number of bytes specified for wide transfer."); -+ dev_err(inst->dev, -+ "At least one byte dropped as a result."); -+ dump_stack(); -+ } -+ } -+out: -+ spin_unlock(&inst->transaction_lock); -+} -+EXPORT_SYMBOL(bcm2835_smi_write_buf); -+ -+void bcm2835_smi_read_buf(struct bcm2835_smi_instance *inst, -+ void *buf, size_t n_bytes) -+{ -+ -+ /* SMI is inherently 32-bit, which causes surprising amounts of mess -+ for bytes % 4 != 0. Easiest to avoid this mess altogether -+ by handling remainder separately. */ -+ int odd_bytes = n_bytes & 0x3; -+ -+ spin_lock(&inst->transaction_lock); -+ n_bytes -= odd_bytes; -+ if (n_bytes > DMA_THRESHOLD_BYTES) { -+ dma_addr_t phy_addr = dma_map_single(inst->dev, -+ buf, n_bytes, -+ DMA_DEV_TO_MEM); -+ struct scatterlist *sgl = smi_scatterlist_from_buffer( -+ inst, phy_addr, n_bytes, -+ &inst->buffer_sgl); -+ if (!sgl) { -+ smi_dump_context_labelled(inst, -+ "Error: could not create scatterlist for read!"); -+ goto out; -+ } -+ smi_dma_read_sgl(inst, sgl, 1, n_bytes); -+ dma_unmap_single(inst->dev, phy_addr, n_bytes, DMA_DEV_TO_MEM); -+ } else if (n_bytes) { -+ smi_read_fifo(inst, (uint32_t *)buf, n_bytes); -+ } -+ buf += n_bytes; -+ -+ if (inst->settings.data_width == SMI_WIDTH_8BIT) { -+ while (odd_bytes--) -+ *((uint8_t *) (buf++)) = smi_read_single_word(inst); -+ } else { -+ while (odd_bytes >= 2) { -+ *(uint16_t *) buf = smi_read_single_word(inst); -+ buf += 2; -+ odd_bytes -= 2; -+ } -+ if (odd_bytes) { -+ dev_err(inst->dev, -+ "WARNING: odd number of bytes specified for wide transfer."); -+ dev_err(inst->dev, -+ "At least one byte dropped as a result."); -+ dump_stack(); -+ } -+ } -+out: -+ spin_unlock(&inst->transaction_lock); -+} -+EXPORT_SYMBOL(bcm2835_smi_read_buf); -+ -+void bcm2835_smi_set_address(struct bcm2835_smi_instance *inst, -+ unsigned int address) -+{ -+ spin_lock(&inst->transaction_lock); -+ smi_set_address(inst, address); -+ spin_unlock(&inst->transaction_lock); -+} -+EXPORT_SYMBOL(bcm2835_smi_set_address); -+ -+struct bcm2835_smi_instance *bcm2835_smi_get(struct device_node *node) -+{ -+ struct platform_device *pdev; -+ -+ if (!node) -+ return NULL; -+ -+ pdev = of_find_device_by_node(node); -+ if (!pdev) -+ return NULL; -+ -+ return platform_get_drvdata(pdev); -+} -+EXPORT_SYMBOL(bcm2835_smi_get); -+ -+/**************************************************************************** -+* -+* bcm2835_smi_probe - called when the driver is loaded. -+* -+***************************************************************************/ -+ -+static int bcm2835_smi_dma_setup(struct bcm2835_smi_instance *inst) -+{ -+ int i, rv = 0; -+ -+ inst->dma_chan = dma_request_slave_channel(inst->dev, "rx-tx"); -+ -+ inst->dma_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; -+ inst->dma_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; -+ inst->dma_config.src_addr = inst->smi_regs_busaddr + SMID; -+ inst->dma_config.dst_addr = inst->dma_config.src_addr; -+ /* Direction unimportant - always overridden by prep_slave_sg */ -+ inst->dma_config.direction = DMA_DEV_TO_MEM; -+ dmaengine_slave_config(inst->dma_chan, &inst->dma_config); -+ /* Alloc and map bounce buffers */ -+ for (i = 0; i < DMA_BOUNCE_BUFFER_COUNT; ++i) { -+ inst->bounce.buffer[i] = -+ dmam_alloc_coherent(inst->dev, DMA_BOUNCE_BUFFER_SIZE, -+ &inst->bounce.phys[i], -+ GFP_KERNEL); -+ if (!inst->bounce.buffer[i]) { -+ dev_err(inst->dev, "Could not allocate buffer!"); -+ rv = -ENOMEM; -+ break; -+ } -+ smi_scatterlist_from_buffer( -+ inst, -+ inst->bounce.phys[i], -+ DMA_BOUNCE_BUFFER_SIZE, -+ &inst->bounce.sgl[i] -+ ); -+ } -+ -+ return rv; -+} -+ -+static int bcm2835_smi_probe(struct platform_device *pdev) -+{ -+ int err; -+ struct device *dev = &pdev->dev; -+ struct device_node *node = dev->of_node; -+ struct resource *ioresource; -+ struct bcm2835_smi_instance *inst; -+ -+ /* Allocate buffers and instance data */ -+ -+ inst = devm_kzalloc(dev, sizeof(struct bcm2835_smi_instance), -+ GFP_KERNEL); -+ -+ if (!inst) -+ return -ENOMEM; -+ -+ inst->dev = dev; -+ spin_lock_init(&inst->transaction_lock); -+ -+ /* We require device tree support */ -+ if (!node) -+ return -EINVAL; -+ -+ ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ inst->smi_regs_ptr = devm_ioremap_resource(dev, ioresource); -+ ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 1); -+ inst->cm_smi_regs_ptr = devm_ioremap_resource(dev, ioresource); -+ inst->smi_regs_busaddr = be32_to_cpu( -+ *of_get_address(node, 0, NULL, NULL)); -+ of_property_read_u32(node, -+ "brcm,smi-clock-source", -+ &inst->clock_source); -+ of_property_read_u32(node, -+ "brcm,smi-clock-divisor", -+ &inst->clock_divisor); -+ -+ err = bcm2835_smi_dma_setup(inst); -+ if (err) -+ return err; -+ -+ /* Finally, do peripheral setup */ -+ -+ smi_setup_clock(inst); -+ smi_setup_regs(inst); -+ -+ platform_set_drvdata(pdev, inst); -+ -+ dev_info(inst->dev, "initialised"); -+ -+ return 0; -+} -+ -+/**************************************************************************** -+* -+* bcm2835_smi_remove - called when the driver is unloaded. -+* -+***************************************************************************/ -+ -+static int bcm2835_smi_remove(struct platform_device *pdev) -+{ -+ struct bcm2835_smi_instance *inst = platform_get_drvdata(pdev); -+ struct device *dev = inst->dev; -+ -+ dev_info(dev, "SMI device removed - OK"); -+ return 0; -+} -+ -+/**************************************************************************** -+* -+* Register the driver with device tree -+* -+***************************************************************************/ -+ -+static const struct of_device_id bcm2835_smi_of_match[] = { -+ {.compatible = "brcm,bcm2835-smi",}, -+ { /* sentinel */ }, -+}; -+ -+MODULE_DEVICE_TABLE(of, bcm2835_smi_of_match); -+ -+static struct platform_driver bcm2835_smi_driver = { -+ .probe = bcm2835_smi_probe, -+ .remove = bcm2835_smi_remove, -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = bcm2835_smi_of_match, -+ }, -+}; -+ -+module_platform_driver(bcm2835_smi_driver); -+ -+MODULE_ALIAS("platform:smi-bcm2835"); -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("Device driver for BCM2835's secondary memory interface"); -+MODULE_AUTHOR("Luke Wren "); ---- /dev/null -+++ b/include/linux/broadcom/bcm2835_smi.h -@@ -0,0 +1,391 @@ -+/** -+ * Declarations and definitions for Broadcom's Secondary Memory Interface -+ * -+ * Written by Luke Wren -+ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd. -+ * Copyright (c) 2010-2012 Broadcom. All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions, and the following disclaimer, -+ * without modification. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The names of the above-listed copyright holders may not be used -+ * to endorse or promote products derived from this software without -+ * specific prior written permission. -+ * -+ * ALTERNATIVELY, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") version 2, as published by the Free -+ * Software Foundation. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS -+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, -+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+#ifndef BCM2835_SMI_H -+#define BCM2835_SMI_H -+ -+#include -+ -+#ifndef __KERNEL__ -+#include -+#include -+#endif -+ -+#define BCM2835_SMI_IOC_MAGIC 0x1 -+#define BCM2835_SMI_INVALID_HANDLE (~0) -+ -+/* IOCTLs 0x100...0x1ff are not device-specific - we can use them */ -+#define BCM2835_SMI_IOC_GET_SETTINGS _IO(BCM2835_SMI_IOC_MAGIC, 0) -+#define BCM2835_SMI_IOC_WRITE_SETTINGS _IO(BCM2835_SMI_IOC_MAGIC, 1) -+#define BCM2835_SMI_IOC_ADDRESS _IO(BCM2835_SMI_IOC_MAGIC, 2) -+#define BCM2835_SMI_IOC_MAX 2 -+ -+#define SMI_WIDTH_8BIT 0 -+#define SMI_WIDTH_16BIT 1 -+#define SMI_WIDTH_9BIT 2 -+#define SMI_WIDTH_18BIT 3 -+ -+/* max number of bytes where DMA will not be used */ -+#define DMA_THRESHOLD_BYTES 128 -+#define DMA_BOUNCE_BUFFER_SIZE (1024 * 1024 / 2) -+#define DMA_BOUNCE_BUFFER_COUNT 3 -+ -+ -+struct smi_settings { -+ int data_width; -+ /* Whether or not to pack multiple SMI transfers into a -+ single 32 bit FIFO word */ -+ bool pack_data; -+ -+ /* Timing for reads (writes the same but for WE) -+ * -+ * OE ----------+ +-------------------- -+ * | | -+ * +----------+ -+ * SD -<==============================>----------- -+ * SA -<=========================================>- -+ * <-setup-> <-strobe -> <-hold -> <- pace -> -+ */ -+ -+ int read_setup_time; -+ int read_hold_time; -+ int read_pace_time; -+ int read_strobe_time; -+ -+ int write_setup_time; -+ int write_hold_time; -+ int write_pace_time; -+ int write_strobe_time; -+ -+ bool dma_enable; /* DREQs */ -+ bool dma_passthrough_enable; /* External DREQs */ -+ int dma_read_thresh; -+ int dma_write_thresh; -+ int dma_panic_read_thresh; -+ int dma_panic_write_thresh; -+}; -+ -+/**************************************************************************** -+* -+* Declare exported SMI functions -+* -+***************************************************************************/ -+ -+#ifdef __KERNEL__ -+ -+#include /* for enum dma_transfer_direction */ -+#include -+#include -+ -+struct bcm2835_smi_instance; -+ -+struct bcm2835_smi_bounce_info { -+ struct semaphore callback_sem; -+ void *buffer[DMA_BOUNCE_BUFFER_COUNT]; -+ dma_addr_t phys[DMA_BOUNCE_BUFFER_COUNT]; -+ struct scatterlist sgl[DMA_BOUNCE_BUFFER_COUNT]; -+}; -+ -+ -+void bcm2835_smi_set_regs_from_settings(struct bcm2835_smi_instance *); -+ -+struct smi_settings *bcm2835_smi_get_settings_from_regs( -+ struct bcm2835_smi_instance *inst); -+ -+void bcm2835_smi_write_buf( -+ struct bcm2835_smi_instance *inst, -+ const void *buf, -+ size_t n_bytes); -+ -+void bcm2835_smi_read_buf( -+ struct bcm2835_smi_instance *inst, -+ void *buf, -+ size_t n_bytes); -+ -+void bcm2835_smi_set_address(struct bcm2835_smi_instance *inst, -+ unsigned int address); -+ -+ssize_t bcm2835_smi_user_dma( -+ struct bcm2835_smi_instance *inst, -+ enum dma_transfer_direction dma_dir, -+ char __user *user_ptr, -+ size_t count, -+ struct bcm2835_smi_bounce_info **bounce); -+ -+struct bcm2835_smi_instance *bcm2835_smi_get(struct device_node *node); -+ -+#endif /* __KERNEL__ */ -+ -+/**************************************************************** -+* -+* Implementation-only declarations -+* -+****************************************************************/ -+ -+#ifdef BCM2835_SMI_IMPLEMENTATION -+ -+/* Clock manager registers for SMI clock: */ -+#define CM_SMI_BASE_ADDRESS ((BCM2708_PERI_BASE) + 0x1010b0) -+/* Clock manager "password" to protect registers from spurious writes */ -+#define CM_PWD (0x5a << 24) -+ -+#define CM_SMI_CTL 0x00 -+#define CM_SMI_DIV 0x04 -+ -+#define CM_SMI_CTL_FLIP (1 << 8) -+#define CM_SMI_CTL_BUSY (1 << 7) -+#define CM_SMI_CTL_KILL (1 << 5) -+#define CM_SMI_CTL_ENAB (1 << 4) -+#define CM_SMI_CTL_SRC_MASK (0xf) -+#define CM_SMI_CTL_SRC_OFFS (0) -+ -+#define CM_SMI_DIV_DIVI_MASK (0xf << 12) -+#define CM_SMI_DIV_DIVI_OFFS (12) -+#define CM_SMI_DIV_DIVF_MASK (0xff << 4) -+#define CM_SMI_DIV_DIVF_OFFS (4) -+ -+/* SMI register mapping:*/ -+#define SMI_BASE_ADDRESS ((BCM2708_PERI_BASE) + 0x600000) -+ -+#define SMICS 0x00 /* control + status register */ -+#define SMIL 0x04 /* length/count (n external txfers) */ -+#define SMIA 0x08 /* address register */ -+#define SMID 0x0c /* data register */ -+#define SMIDSR0 0x10 /* device 0 read settings */ -+#define SMIDSW0 0x14 /* device 0 write settings */ -+#define SMIDSR1 0x18 /* device 1 read settings */ -+#define SMIDSW1 0x1c /* device 1 write settings */ -+#define SMIDSR2 0x20 /* device 2 read settings */ -+#define SMIDSW2 0x24 /* device 2 write settings */ -+#define SMIDSR3 0x28 /* device 3 read settings */ -+#define SMIDSW3 0x2c /* device 3 write settings */ -+#define SMIDC 0x30 /* DMA control registers */ -+#define SMIDCS 0x34 /* direct control/status register */ -+#define SMIDA 0x38 /* direct address register */ -+#define SMIDD 0x3c /* direct data registers */ -+#define SMIFD 0x40 /* FIFO debug register */ -+ -+ -+ -+/* Control and Status register bits: -+ * SMICS_RXF : RX fifo full: 1 when RX fifo is full -+ * SMICS_TXE : TX fifo empty: 1 when empty. -+ * SMICS_RXD : RX fifo contains data: 1 when there is data. -+ * SMICS_TXD : TX fifo can accept data: 1 when true. -+ * SMICS_RXR : RX fifo needs reading: 1 when fifo more than 3/4 full, or -+ * when "DONE" and fifo not emptied. -+ * SMICS_TXW : TX fifo needs writing: 1 when less than 1/4 full. -+ * SMICS_AFERR : AXI FIFO error: 1 when fifo read when empty or written -+ * when full. Write 1 to clear. -+ * SMICS_EDREQ : 1 when external DREQ received. -+ * SMICS_PXLDAT : Pixel data: write 1 to enable pixel transfer modes. -+ * SMICS_SETERR : 1 if there was an error writing to setup regs (e.g. -+ * tx was in progress). Write 1 to clear. -+ * SMICS_PVMODE : Set to 1 to enable pixel valve mode. -+ * SMICS_INTR : Set to 1 to enable interrupt on RX. -+ * SMICS_INTT : Set to 1 to enable interrupt on TX. -+ * SMICS_INTD : Set to 1 to enable interrupt on DONE condition. -+ * SMICS_TEEN : Tear effect mode enabled: Programmed transfers will wait -+ * for a TE trigger before writing. -+ * SMICS_PAD1 : Padding settings for external transfers. For writes: the -+ * number of bytes initially written to the TX fifo that -+ * SMICS_PAD0 : should be ignored. For reads: the number of bytes that will -+ * be read before the data, and should be dropped. -+ * SMICS_WRITE : Transfer direction: 1 = write to external device, 0 = read -+ * SMICS_CLEAR : Write 1 to clear the FIFOs. -+ * SMICS_START : Write 1 to start the programmed transfer. -+ * SMICS_ACTIVE : Reads as 1 when a programmed transfer is underway. -+ * SMICS_DONE : Reads as 1 when transfer finished. For RX, not set until -+ * FIFO emptied. -+ * SMICS_ENABLE : Set to 1 to enable the SMI peripheral, 0 to disable. -+ */ -+ -+#define SMICS_RXF (1 << 31) -+#define SMICS_TXE (1 << 30) -+#define SMICS_RXD (1 << 29) -+#define SMICS_TXD (1 << 28) -+#define SMICS_RXR (1 << 27) -+#define SMICS_TXW (1 << 26) -+#define SMICS_AFERR (1 << 25) -+#define SMICS_EDREQ (1 << 15) -+#define SMICS_PXLDAT (1 << 14) -+#define SMICS_SETERR (1 << 13) -+#define SMICS_PVMODE (1 << 12) -+#define SMICS_INTR (1 << 11) -+#define SMICS_INTT (1 << 10) -+#define SMICS_INTD (1 << 9) -+#define SMICS_TEEN (1 << 8) -+#define SMICS_PAD1 (1 << 7) -+#define SMICS_PAD0 (1 << 6) -+#define SMICS_WRITE (1 << 5) -+#define SMICS_CLEAR (1 << 4) -+#define SMICS_START (1 << 3) -+#define SMICS_ACTIVE (1 << 2) -+#define SMICS_DONE (1 << 1) -+#define SMICS_ENABLE (1 << 0) -+ -+/* Address register bits: */ -+ -+#define SMIA_DEVICE_MASK ((1 << 9) | (1 << 8)) -+#define SMIA_DEVICE_OFFS (8) -+#define SMIA_ADDR_MASK (0x3f) /* bits 5 -> 0 */ -+#define SMIA_ADDR_OFFS (0) -+ -+/* DMA control register bits: -+ * SMIDC_DMAEN : DMA enable: set 1: DMA requests will be issued. -+ * SMIDC_DMAP : DMA passthrough: when set to 0, top two data pins are used by -+ * SMI as usual. When set to 1, the top two pins are used for -+ * external DREQs: pin 16 read request, 17 write. -+ * SMIDC_PANIC* : Threshold at which DMA will panic during read/write. -+ * SMIDC_REQ* : Threshold at which DMA will generate a DREQ. -+ */ -+ -+#define SMIDC_DMAEN (1 << 28) -+#define SMIDC_DMAP (1 << 24) -+#define SMIDC_PANICR_MASK (0x3f << 18) -+#define SMIDC_PANICR_OFFS (18) -+#define SMIDC_PANICW_MASK (0x3f << 12) -+#define SMIDC_PANICW_OFFS (12) -+#define SMIDC_REQR_MASK (0x3f << 6) -+#define SMIDC_REQR_OFFS (6) -+#define SMIDC_REQW_MASK (0x3f) -+#define SMIDC_REQW_OFFS (0) -+ -+/* Device settings register bits: same for all 4 (or 3?) device register sets. -+ * Device read settings: -+ * SMIDSR_RWIDTH : Read transfer width. 00 = 8bit, 01 = 16bit, -+ * 10 = 18bit, 11 = 9bit. -+ * SMIDSR_RSETUP : Read setup time: number of core cycles between chip -+ * select/address and read strobe. Min 1, max 64. -+ * SMIDSR_MODE68 : 1 for System 68 mode (i.e. enable + direction pins, -+ * rather than OE + WE pin) -+ * SMIDSR_FSETUP : If set to 1, setup time only applies to first -+ * transfer after address change. -+ * SMIDSR_RHOLD : Number of core cycles between read strobe going -+ * inactive and CS/address going inactive. Min 1, max 64 -+ * SMIDSR_RPACEALL : When set to 1, this device's RPACE value will always -+ * be used for the next transaction, even if it is not -+ * to this device. -+ * SMIDSR_RPACE : Number of core cycles spent waiting between CS -+ * deassert and start of next transfer. Min 1, max 128 -+ * SMIDSR_RDREQ : 1 = use external DMA request on SD16 to pace reads -+ * from device. Must also set DMAP in SMICS. -+ * SMIDSR_RSTROBE : Number of cycles to assert the read strobe. -+ * min 1, max 128. -+ */ -+#define SMIDSR_RWIDTH_MASK ((1<<31)|(1<<30)) -+#define SMIDSR_RWIDTH_OFFS (30) -+#define SMIDSR_RSETUP_MASK (0x3f << 24) -+#define SMIDSR_RSETUP_OFFS (24) -+#define SMIDSR_MODE68 (1 << 23) -+#define SMIDSR_FSETUP (1 << 22) -+#define SMIDSR_RHOLD_MASK (0x3f << 16) -+#define SMIDSR_RHOLD_OFFS (16) -+#define SMIDSR_RPACEALL (1 << 15) -+#define SMIDSR_RPACE_MASK (0x7f << 8) -+#define SMIDSR_RPACE_OFFS (8) -+#define SMIDSR_RDREQ (1 << 7) -+#define SMIDSR_RSTROBE_MASK (0x7f) -+#define SMIDSR_RSTROBE_OFFS (0) -+ -+/* Device write settings: -+ * SMIDSW_WWIDTH : Write transfer width. 00 = 8bit, 01 = 16bit, -+ * 10= 18bit, 11 = 9bit. -+ * SMIDSW_WSETUP : Number of cycles between CS assert and write strobe. -+ * Min 1, max 64. -+ * SMIDSW_WFORMAT : Pixel format of input. 0 = 16bit RGB 565, -+ * 1 = 32bit RGBA 8888 -+ * SMIDSW_WSWAP : 1 = swap pixel data bits. (Use with SMICS_PXLDAT) -+ * SMIDSW_WHOLD : Time between WE deassert and CS deassert. 1 to 64 -+ * SMIDSW_WPACEALL : 1: this device's WPACE will be used for the next -+ * transfer, regardless of that transfer's device. -+ * SMIDSW_WPACE : Cycles between CS deassert and next CS assert. -+ * Min 1, max 128 -+ * SMIDSW_WDREQ : Use external DREQ on pin 17 to pace writes. DMAP must -+ * be set in SMICS. -+ * SMIDSW_WSTROBE : Number of cycles to assert the write strobe. -+ * Min 1, max 128 -+ */ -+#define SMIDSW_WWIDTH_MASK ((1<<31)|(1<<30)) -+#define SMIDSW_WWIDTH_OFFS (30) -+#define SMIDSW_WSETUP_MASK (0x3f << 24) -+#define SMIDSW_WSETUP_OFFS (24) -+#define SMIDSW_WFORMAT (1 << 23) -+#define SMIDSW_WSWAP (1 << 22) -+#define SMIDSW_WHOLD_MASK (0x3f << 16) -+#define SMIDSW_WHOLD_OFFS (16) -+#define SMIDSW_WPACEALL (1 << 15) -+#define SMIDSW_WPACE_MASK (0x7f << 8) -+#define SMIDSW_WPACE_OFFS (8) -+#define SMIDSW_WDREQ (1 << 7) -+#define SMIDSW_WSTROBE_MASK (0x7f) -+#define SMIDSW_WSTROBE_OFFS (0) -+ -+/* Direct transfer control + status register -+ * SMIDCS_WRITE : Direction of transfer: 1 -> write, 0 -> read -+ * SMIDCS_DONE : 1 when a transfer has finished. Write 1 to clear. -+ * SMIDCS_START : Write 1 to start a transfer, if one is not already underway. -+ * SMIDCE_ENABLE: Write 1 to enable SMI in direct mode. -+ */ -+ -+#define SMIDCS_WRITE (1 << 3) -+#define SMIDCS_DONE (1 << 2) -+#define SMIDCS_START (1 << 1) -+#define SMIDCS_ENABLE (1 << 0) -+ -+/* Direct transfer address register -+ * SMIDA_DEVICE : Indicates which of the device settings banks should be used. -+ * SMIDA_ADDR : The value to be asserted on the address pins. -+ */ -+ -+#define SMIDA_DEVICE_MASK ((1<<9)|(1<<8)) -+#define SMIDA_DEVICE_OFFS (8) -+#define SMIDA_ADDR_MASK (0x3f) -+#define SMIDA_ADDR_OFFS (0) -+ -+/* FIFO debug register -+ * SMIFD_FLVL : The high-tide mark of FIFO count during the most recent txfer -+ * SMIFD_FCNT : The current FIFO count. -+ */ -+#define SMIFD_FLVL_MASK (0x3f << 8) -+#define SMIFD_FLVL_OFFS (8) -+#define SMIFD_FCNT_MASK (0x3f) -+#define SMIFD_FCNT_OFFS (0) -+ -+#endif /* BCM2835_SMI_IMPLEMENTATION */ -+ -+#endif /* BCM2835_SMI_H */ diff --git a/target/linux/brcm2708/patches-4.9/0043-MISC-bcm2835-smi-use-clock-manager-and-fix-reload-is.patch b/target/linux/brcm2708/patches-4.9/0043-MISC-bcm2835-smi-use-clock-manager-and-fix-reload-is.patch deleted file mode 100644 index 69f68c79eda7..000000000000 --- a/target/linux/brcm2708/patches-4.9/0043-MISC-bcm2835-smi-use-clock-manager-and-fix-reload-is.patch +++ /dev/null @@ -1,169 +0,0 @@ -From 6bc6d433aaed4d4a5d5be44e70d9de865a850048 Mon Sep 17 00:00:00 2001 -From: Martin Sperl -Date: Tue, 26 Apr 2016 14:59:21 +0000 -Subject: [PATCH] MISC: bcm2835: smi: use clock manager and fix reload issues - -Use clock manager instead of self-made clockmanager. - -Also fix some error paths that showd up during development -(especially missing release of dma resources on rmmod) - -Signed-off-by: Martin Sperl ---- - drivers/misc/bcm2835_smi.c | 86 +++++++++++++++------------------------------- - 1 file changed, 28 insertions(+), 58 deletions(-) - ---- a/drivers/misc/bcm2835_smi.c -+++ b/drivers/misc/bcm2835_smi.c -@@ -34,6 +34,7 @@ - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -+#include - #include - #include - #include -@@ -62,7 +63,7 @@ - struct bcm2835_smi_instance { - struct device *dev; - struct smi_settings settings; -- __iomem void *smi_regs_ptr, *cm_smi_regs_ptr; -+ __iomem void *smi_regs_ptr; - dma_addr_t smi_regs_busaddr; - - struct dma_chan *dma_chan; -@@ -72,8 +73,7 @@ struct bcm2835_smi_instance { - - struct scatterlist buffer_sgl; - -- int clock_source; -- int clock_divisor; -+ struct clk *clk; - - /* Sometimes we are called into in an atomic context (e.g. by - JFFS2 + MTD) so we can't use a mutex */ -@@ -82,42 +82,6 @@ struct bcm2835_smi_instance { - - /**************************************************************************** - * --* SMI clock manager setup --* --***************************************************************************/ -- --static inline void write_smi_cm_reg(struct bcm2835_smi_instance *inst, -- u32 val, unsigned reg) --{ -- writel(CM_PWD | val, inst->cm_smi_regs_ptr + reg); --} -- --static inline u32 read_smi_cm_reg(struct bcm2835_smi_instance *inst, -- unsigned reg) --{ -- return readl(inst->cm_smi_regs_ptr + reg); --} -- --static void smi_setup_clock(struct bcm2835_smi_instance *inst) --{ -- dev_dbg(inst->dev, "Setting up clock..."); -- /* Disable SMI clock and wait for it to stop. */ -- write_smi_cm_reg(inst, 0, CM_SMI_CTL); -- while (read_smi_cm_reg(inst, CM_SMI_CTL) & CM_SMI_CTL_BUSY) -- ; -- -- write_smi_cm_reg(inst, (inst->clock_divisor << CM_SMI_DIV_DIVI_OFFS), -- CM_SMI_DIV); -- write_smi_cm_reg(inst, (inst->clock_source << CM_SMI_CTL_SRC_OFFS), -- CM_SMI_CTL); -- -- /* Enable the clock */ -- write_smi_cm_reg(inst, (inst->clock_source << CM_SMI_CTL_SRC_OFFS) | -- CM_SMI_CTL_ENAB, CM_SMI_CTL); --} -- --/**************************************************************************** --* - * SMI peripheral setup - * - ***************************************************************************/ -@@ -894,42 +858,40 @@ static int bcm2835_smi_probe(struct plat - struct device_node *node = dev->of_node; - struct resource *ioresource; - struct bcm2835_smi_instance *inst; -+ const __be32 *addr; - -+ /* We require device tree support */ -+ if (!node) -+ return -EINVAL; - /* Allocate buffers and instance data */ -- - inst = devm_kzalloc(dev, sizeof(struct bcm2835_smi_instance), - GFP_KERNEL); -- - if (!inst) - return -ENOMEM; - - inst->dev = dev; - spin_lock_init(&inst->transaction_lock); - -- /* We require device tree support */ -- if (!node) -- return -EINVAL; -- - ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0); - inst->smi_regs_ptr = devm_ioremap_resource(dev, ioresource); -- ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 1); -- inst->cm_smi_regs_ptr = devm_ioremap_resource(dev, ioresource); -- inst->smi_regs_busaddr = be32_to_cpu( -- *of_get_address(node, 0, NULL, NULL)); -- of_property_read_u32(node, -- "brcm,smi-clock-source", -- &inst->clock_source); -- of_property_read_u32(node, -- "brcm,smi-clock-divisor", -- &inst->clock_divisor); -+ if (IS_ERR(inst->smi_regs_ptr)) { -+ err = PTR_ERR(inst->smi_regs_ptr); -+ goto err; -+ } -+ addr = of_get_address(node, 0, NULL, NULL); -+ inst->smi_regs_busaddr = be32_to_cpu(addr); - - err = bcm2835_smi_dma_setup(inst); - if (err) -- return err; -+ goto err; - -- /* Finally, do peripheral setup */ -+ /* request clock */ -+ inst->clk = devm_clk_get(dev, NULL); -+ if (!inst->clk) -+ goto err; -+ clk_prepare_enable(inst->clk); - -- smi_setup_clock(inst); -+ /* Finally, do peripheral setup */ - smi_setup_regs(inst); - - platform_set_drvdata(pdev, inst); -@@ -937,6 +899,9 @@ static int bcm2835_smi_probe(struct plat - dev_info(inst->dev, "initialised"); - - return 0; -+err: -+ kfree(inst); -+ return err; - } - - /**************************************************************************** -@@ -950,6 +915,11 @@ static int bcm2835_smi_remove(struct pla - struct bcm2835_smi_instance *inst = platform_get_drvdata(pdev); - struct device *dev = inst->dev; - -+ dmaengine_terminate_all(inst->dma_chan); -+ dma_release_channel(inst->dma_chan); -+ -+ clk_disable_unprepare(inst->clk); -+ - dev_info(dev, "SMI device removed - OK"); - return 0; - } diff --git a/target/linux/brcm2708/patches-4.9/0044-Add-SMI-NAND-driver.patch b/target/linux/brcm2708/patches-4.9/0044-Add-SMI-NAND-driver.patch deleted file mode 100644 index ec6010a29661..000000000000 --- a/target/linux/brcm2708/patches-4.9/0044-Add-SMI-NAND-driver.patch +++ /dev/null @@ -1,357 +0,0 @@ -From be64c4dbf6be17ce20ee214478509a3738256d46 Mon Sep 17 00:00:00 2001 -From: Luke Wren -Date: Sat, 5 Sep 2015 01:16:10 +0100 -Subject: [PATCH] Add SMI NAND driver - -Signed-off-by: Luke Wren ---- - .../bindings/mtd/brcm,bcm2835-smi-nand.txt | 42 ++++ - drivers/mtd/nand/Kconfig | 7 + - drivers/mtd/nand/Makefile | 1 + - drivers/mtd/nand/bcm2835_smi_nand.c | 267 +++++++++++++++++++++ - 4 files changed, 317 insertions(+) - create mode 100644 Documentation/devicetree/bindings/mtd/brcm,bcm2835-smi-nand.txt - create mode 100644 drivers/mtd/nand/bcm2835_smi_nand.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/mtd/brcm,bcm2835-smi-nand.txt -@@ -0,0 +1,42 @@ -+* BCM2835 SMI NAND flash -+ -+This driver is a shim between the BCM2835 SMI driver (SMI is a peripheral for -+talking to parallel register interfaces) and Linux's MTD layer. -+ -+Required properties: -+- compatible: "brcm,bcm2835-smi-nand" -+- status: "okay" -+ -+Optional properties: -+- partition@n, where n is an integer from a consecutive sequence starting at 0 -+ - Difficult to store partition table on NAND device - normally put it -+ in the source code, kernel bootparams, or device tree (the best way!) -+ - Sub-properties: -+ - label: the partition name, as shown by mtdinfo /dev/mtd* -+ - reg: the size and offset of this partition. -+ - (optional) read-only: an empty property flagging as read only -+ -+Example: -+ -+nand: flash@0 { -+ compatible = "brcm,bcm2835-smi-nand"; -+ status = "okay"; -+ -+ partition@0 { -+ label = "stage2"; -+ // 128k -+ reg = <0 0x20000>; -+ read-only; -+ }; -+ partition@1 { -+ label = "firmware"; -+ // 16M -+ reg = <0x20000 0x1000000>; -+ read-only; -+ }; -+ partition@2 { -+ label = "root"; -+ // 2G -+ reg = <0x1020000 0x80000000>; -+ }; -+}; -\ No newline at end of file ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -41,6 +41,13 @@ config MTD_SM_COMMON - tristate - default n - -+config MTD_NAND_BCM2835_SMI -+ tristate "Use Broadcom's Secondary Memory Interface as a NAND controller (BCM283x)" -+ depends on BCM2835_SMI -+ default m -+ help -+ Uses the BCM2835's SMI peripheral as a NAND controller. -+ - config MTD_NAND_DENALI - tristate - ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -14,6 +14,7 @@ obj-$(CONFIG_MTD_NAND_DENALI) += denali - obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o - obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o - obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o -+obj-$(CONFIG_MTD_NAND_BCM2835_SMI) += bcm2835_smi_nand.o - obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o - obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o - obj-$(CONFIG_MTD_NAND_DAVINCI) += davinci_nand.o ---- /dev/null -+++ b/drivers/mtd/nand/bcm2835_smi_nand.c -@@ -0,0 +1,267 @@ -+/** -+ * NAND flash driver for Broadcom Secondary Memory Interface -+ * -+ * Written by Luke Wren -+ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions, and the following disclaimer, -+ * without modification. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The names of the above-listed copyright holders may not be used -+ * to endorse or promote products derived from this software without -+ * specific prior written permission. -+ * -+ * ALTERNATIVELY, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") version 2, as published by the Free -+ * Software Foundation. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS -+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, -+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#define DEVICE_NAME "bcm2835-smi-nand" -+#define DRIVER_NAME "smi-nand-bcm2835" -+ -+struct bcm2835_smi_nand_host { -+ struct bcm2835_smi_instance *smi_inst; -+ struct nand_chip nand_chip; -+ struct mtd_info mtd; -+ struct device *dev; -+}; -+ -+/**************************************************************************** -+* -+* NAND functionality implementation -+* -+****************************************************************************/ -+ -+#define SMI_NAND_CLE_PIN 0x01 -+#define SMI_NAND_ALE_PIN 0x02 -+ -+static inline void bcm2835_smi_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, -+ unsigned int ctrl) -+{ -+ uint32_t cmd32 = cmd; -+ uint32_t addr = ~(SMI_NAND_CLE_PIN | SMI_NAND_ALE_PIN); -+ struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); -+ struct bcm2835_smi_instance *inst = host->smi_inst; -+ -+ if (ctrl & NAND_CLE) -+ addr |= SMI_NAND_CLE_PIN; -+ if (ctrl & NAND_ALE) -+ addr |= SMI_NAND_ALE_PIN; -+ /* Lower ALL the CS pins! */ -+ if (ctrl & NAND_NCE) -+ addr &= (SMI_NAND_CLE_PIN | SMI_NAND_ALE_PIN); -+ -+ bcm2835_smi_set_address(inst, addr); -+ -+ if (cmd != NAND_CMD_NONE) -+ bcm2835_smi_write_buf(inst, &cmd32, 1); -+} -+ -+static inline uint8_t bcm2835_smi_nand_read_byte(struct mtd_info *mtd) -+{ -+ uint8_t byte; -+ struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); -+ struct bcm2835_smi_instance *inst = host->smi_inst; -+ -+ bcm2835_smi_read_buf(inst, &byte, 1); -+ return byte; -+} -+ -+static inline void bcm2835_smi_nand_write_byte(struct mtd_info *mtd, -+ uint8_t byte) -+{ -+ struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); -+ struct bcm2835_smi_instance *inst = host->smi_inst; -+ -+ bcm2835_smi_write_buf(inst, &byte, 1); -+} -+ -+static inline void bcm2835_smi_nand_write_buf(struct mtd_info *mtd, -+ const uint8_t *buf, int len) -+{ -+ struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); -+ struct bcm2835_smi_instance *inst = host->smi_inst; -+ -+ bcm2835_smi_write_buf(inst, buf, len); -+} -+ -+static inline void bcm2835_smi_nand_read_buf(struct mtd_info *mtd, -+ uint8_t *buf, int len) -+{ -+ struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); -+ struct bcm2835_smi_instance *inst = host->smi_inst; -+ -+ bcm2835_smi_read_buf(inst, buf, len); -+} -+ -+/**************************************************************************** -+* -+* Probe and remove functions -+* -+***************************************************************************/ -+ -+static int bcm2835_smi_nand_probe(struct platform_device *pdev) -+{ -+ struct bcm2835_smi_nand_host *host; -+ struct nand_chip *this; -+ struct mtd_info *mtd; -+ struct device *dev = &pdev->dev; -+ struct device_node *node = dev->of_node, *smi_node; -+ struct mtd_part_parser_data ppdata; -+ struct smi_settings *smi_settings; -+ struct bcm2835_smi_instance *smi_inst; -+ int ret = -ENXIO; -+ -+ if (!node) { -+ dev_err(dev, "No device tree node supplied!"); -+ return -EINVAL; -+ } -+ -+ smi_node = of_parse_phandle(node, "smi_handle", 0); -+ -+ /* Request use of SMI peripheral: */ -+ smi_inst = bcm2835_smi_get(smi_node); -+ -+ if (!smi_inst) { -+ dev_err(dev, "Could not register with SMI."); -+ return -EPROBE_DEFER; -+ } -+ -+ /* Set SMI timing and bus width */ -+ -+ smi_settings = bcm2835_smi_get_settings_from_regs(smi_inst); -+ -+ smi_settings->data_width = SMI_WIDTH_8BIT; -+ smi_settings->read_setup_time = 2; -+ smi_settings->read_hold_time = 1; -+ smi_settings->read_pace_time = 1; -+ smi_settings->read_strobe_time = 3; -+ -+ smi_settings->write_setup_time = 2; -+ smi_settings->write_hold_time = 1; -+ smi_settings->write_pace_time = 1; -+ smi_settings->write_strobe_time = 3; -+ -+ bcm2835_smi_set_regs_from_settings(smi_inst); -+ -+ host = devm_kzalloc(dev, sizeof(struct bcm2835_smi_nand_host), -+ GFP_KERNEL); -+ if (!host) -+ return -ENOMEM; -+ -+ host->dev = dev; -+ host->smi_inst = smi_inst; -+ -+ platform_set_drvdata(pdev, host); -+ -+ /* Link the structures together */ -+ -+ this = &host->nand_chip; -+ mtd = &host->mtd; -+ mtd->priv = this; -+ mtd->owner = THIS_MODULE; -+ mtd->dev.parent = dev; -+ mtd->name = DRIVER_NAME; -+ -+ /* 20 us command delay time... */ -+ this->chip_delay = 20; -+ -+ this->priv = host; -+ this->cmd_ctrl = bcm2835_smi_nand_cmd_ctrl; -+ this->read_byte = bcm2835_smi_nand_read_byte; -+ this->write_byte = bcm2835_smi_nand_write_byte; -+ this->write_buf = bcm2835_smi_nand_write_buf; -+ this->read_buf = bcm2835_smi_nand_read_buf; -+ -+ this->ecc.mode = NAND_ECC_SOFT; -+ -+ /* Should never be accessed directly: */ -+ -+ this->IO_ADDR_R = (void *)0xdeadbeef; -+ this->IO_ADDR_W = (void *)0xdeadbeef; -+ -+ /* First scan to find the device and get the page size */ -+ -+ if (nand_scan_ident(mtd, 1, NULL)) -+ return -ENXIO; -+ -+ /* Second phase scan */ -+ -+ if (nand_scan_tail(mtd)) -+ return -ENXIO; -+ -+ ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); -+ if (!ret) -+ return 0; -+ -+ nand_release(mtd); -+ return -EINVAL; -+} -+ -+static int bcm2835_smi_nand_remove(struct platform_device *pdev) -+{ -+ struct bcm2835_smi_nand_host *host = platform_get_drvdata(pdev); -+ -+ nand_release(&host->mtd); -+ -+ return 0; -+} -+ -+/**************************************************************************** -+* -+* Register the driver with device tree -+* -+***************************************************************************/ -+ -+static const struct of_device_id bcm2835_smi_nand_of_match[] = { -+ {.compatible = "brcm,bcm2835-smi-nand",}, -+ { /* sentinel */ } -+}; -+ -+MODULE_DEVICE_TABLE(of, bcm2835_smi_nand_of_match); -+ -+static struct platform_driver bcm2835_smi_nand_driver = { -+ .probe = bcm2835_smi_nand_probe, -+ .remove = bcm2835_smi_nand_remove, -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = bcm2835_smi_nand_of_match, -+ }, -+}; -+ -+module_platform_driver(bcm2835_smi_nand_driver); -+ -+MODULE_ALIAS("platform:smi-nand-bcm2835"); -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION -+ ("Driver for NAND chips using Broadcom Secondary Memory Interface"); -+MODULE_AUTHOR("Luke Wren "); diff --git a/target/linux/brcm2708/patches-4.9/0045-lirc-added-support-for-RaspberryPi-GPIO.patch b/target/linux/brcm2708/patches-4.9/0045-lirc-added-support-for-RaspberryPi-GPIO.patch deleted file mode 100644 index 0cbc1c45a47f..000000000000 --- a/target/linux/brcm2708/patches-4.9/0045-lirc-added-support-for-RaspberryPi-GPIO.patch +++ /dev/null @@ -1,855 +0,0 @@ -From 277c109833c1d78543bec0723ab42f4c79937df9 Mon Sep 17 00:00:00 2001 -From: Aron Szabo -Date: Sat, 16 Jun 2012 12:15:55 +0200 -Subject: [PATCH] lirc: added support for RaspberryPi GPIO - -lirc_rpi: Use read_current_timer to determine transmitter delay. Thanks to jjmz and others -See: https://github.com/raspberrypi/linux/issues/525 - -lirc: Remove restriction on gpio pins that can be used with lirc - -Compute Module, for example could use different pins - -lirc_rpi: Add parameter to specify input pin pull - -Depending on the connected IR circuitry it might be desirable to change the -gpios internal pull from it pull-down default behaviour. Add a module -parameter to allow the user to set it explicitly. - -Signed-off-by: Julian Scheel - -lirc-rpi: Use the higher-level irq control functions - -This module used to access the irq_chip methods of the -gpio controller directly, rather than going through the -standard enable_irq/irq_set_irq_type functions. This -caused problems on pinctrl-bcm2835 which only implements -the irq_enable/disable methods and not irq_unmask/mask. - -lirc-rpi: Correct the interrupt usage - -1) Correct the use of enable_irq (i.e. don't call it so often) -2) Correct the shutdown sequence. -3) Avoid a bcm2708_gpio driver quirk by setting the irq flags earlier - -lirc-rpi: use getnstimeofday instead of read_current_timer - -read_current_timer isn't guaranteed to return values in -microseconds, and indeed it doesn't on a Pi2. - -Issue: linux#827 - -lirc-rpi: Add device tree support, and a suitable overlay - -The overlay supports DT parameters that match the old module -parameters, except that gpio_in_pull should be set using the -strings "up", "down" or "off". - -lirc-rpi: Also support pinctrl-bcm2835 in non-DT mode - -fix auto-sense in lirc_rpi driver - -On a Raspberry Pi 2, the lirc_rpi driver might receive spurious -interrupts and change it's low-active / high-active setting. -When this happens, the IR remote control stops working. - -This patch disables this auto-detection if the 'sense' parameter -was set in the device tree, making the driver robust to such -spurious interrupts. ---- - drivers/staging/media/lirc/Kconfig | 6 + - drivers/staging/media/lirc/Makefile | 1 + - drivers/staging/media/lirc/lirc_rpi.c | 734 ++++++++++++++++++++++++++++++++++ - include/linux/platform_data/bcm2708.h | 23 ++ - 4 files changed, 764 insertions(+) - create mode 100644 drivers/staging/media/lirc/lirc_rpi.c - create mode 100644 include/linux/platform_data/bcm2708.h - ---- a/drivers/staging/media/lirc/Kconfig -+++ b/drivers/staging/media/lirc/Kconfig -@@ -32,6 +32,12 @@ config LIRC_PARALLEL - help - Driver for Homebrew Parallel Port Receivers - -+config LIRC_RPI -+ tristate "Homebrew GPIO Port Receiver/Transmitter for the RaspberryPi" -+ depends on LIRC -+ help -+ Driver for Homebrew GPIO Port Receiver/Transmitter for the RaspberryPi -+ - config LIRC_SASEM - tristate "Sasem USB IR Remote" - depends on LIRC && USB ---- a/drivers/staging/media/lirc/Makefile -+++ b/drivers/staging/media/lirc/Makefile -@@ -6,6 +6,7 @@ - obj-$(CONFIG_LIRC_BT829) += lirc_bt829.o - obj-$(CONFIG_LIRC_IMON) += lirc_imon.o - obj-$(CONFIG_LIRC_PARALLEL) += lirc_parallel.o -+obj-$(CONFIG_LIRC_RPI) += lirc_rpi.o - obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o - obj-$(CONFIG_LIRC_SERIAL) += lirc_serial.o - obj-$(CONFIG_LIRC_SIR) += lirc_sir.o ---- /dev/null -+++ b/drivers/staging/media/lirc/lirc_rpi.c -@@ -0,0 +1,734 @@ -+/* -+ * lirc_rpi.c -+ * -+ * lirc_rpi - Device driver that records pulse- and pause-lengths -+ * (space-lengths) (just like the lirc_serial driver does) -+ * between GPIO interrupt events on the Raspberry Pi. -+ * Lots of code has been taken from the lirc_serial module, -+ * so I would like say thanks to the authors. -+ * -+ * Copyright (C) 2012 Aron Robert Szabo , -+ * Michael Bishop -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define LIRC_DRIVER_NAME "lirc_rpi" -+#define RBUF_LEN 256 -+#define LIRC_TRANSMITTER_LATENCY 50 -+ -+#ifndef MAX_UDELAY_MS -+#define MAX_UDELAY_US 5000 -+#else -+#define MAX_UDELAY_US (MAX_UDELAY_MS*1000) -+#endif -+ -+#define dprintk(fmt, args...) \ -+ do { \ -+ if (debug) \ -+ printk(KERN_DEBUG LIRC_DRIVER_NAME ": " \ -+ fmt, ## args); \ -+ } while (0) -+ -+/* module parameters */ -+ -+/* set the default GPIO input pin */ -+static int gpio_in_pin = 18; -+/* set the default pull behaviour for input pin */ -+static int gpio_in_pull = BCM2708_PULL_DOWN; -+/* set the default GPIO output pin */ -+static int gpio_out_pin = 17; -+/* enable debugging messages */ -+static bool debug; -+/* -1 = auto, 0 = active high, 1 = active low */ -+static int sense = -1; -+/* use softcarrier by default */ -+static bool softcarrier = 1; -+/* 0 = do not invert output, 1 = invert output */ -+static bool invert = 0; -+ -+struct gpio_chip *gpiochip; -+static int irq_num; -+static int auto_sense = 1; -+ -+/* forward declarations */ -+static long send_pulse(unsigned long length); -+static void send_space(long length); -+static void lirc_rpi_exit(void); -+ -+static struct platform_device *lirc_rpi_dev; -+static struct timeval lasttv = { 0, 0 }; -+static struct lirc_buffer rbuf; -+static spinlock_t lock; -+ -+/* initialized/set in init_timing_params() */ -+static unsigned int freq = 38000; -+static unsigned int duty_cycle = 50; -+static unsigned long period; -+static unsigned long pulse_width; -+static unsigned long space_width; -+ -+static void safe_udelay(unsigned long usecs) -+{ -+ while (usecs > MAX_UDELAY_US) { -+ udelay(MAX_UDELAY_US); -+ usecs -= MAX_UDELAY_US; -+ } -+ udelay(usecs); -+} -+ -+static unsigned long read_current_us(void) -+{ -+ struct timespec now; -+ getnstimeofday(&now); -+ return (now.tv_sec * 1000000) + (now.tv_nsec/1000); -+} -+ -+static int init_timing_params(unsigned int new_duty_cycle, -+ unsigned int new_freq) -+{ -+ if (1000 * 1000000L / new_freq * new_duty_cycle / 100 <= -+ LIRC_TRANSMITTER_LATENCY) -+ return -EINVAL; -+ if (1000 * 1000000L / new_freq * (100 - new_duty_cycle) / 100 <= -+ LIRC_TRANSMITTER_LATENCY) -+ return -EINVAL; -+ duty_cycle = new_duty_cycle; -+ freq = new_freq; -+ period = 1000 * 1000000L / freq; -+ pulse_width = period * duty_cycle / 100; -+ space_width = period - pulse_width; -+ dprintk("in init_timing_params, freq=%d pulse=%ld, " -+ "space=%ld\n", freq, pulse_width, space_width); -+ return 0; -+} -+ -+static long send_pulse_softcarrier(unsigned long length) -+{ -+ int flag; -+ unsigned long actual, target; -+ unsigned long actual_us, initial_us, target_us; -+ -+ length *= 1000; -+ -+ actual = 0; target = 0; flag = 0; -+ actual_us = read_current_us(); -+ -+ while (actual < length) { -+ if (flag) { -+ gpiochip->set(gpiochip, gpio_out_pin, invert); -+ target += space_width; -+ } else { -+ gpiochip->set(gpiochip, gpio_out_pin, !invert); -+ target += pulse_width; -+ } -+ initial_us = actual_us; -+ target_us = actual_us + (target - actual) / 1000; -+ /* -+ * Note - we've checked in ioctl that the pulse/space -+ * widths are big enough so that d is > 0 -+ */ -+ if ((int)(target_us - actual_us) > 0) -+ udelay(target_us - actual_us); -+ actual_us = read_current_us(); -+ actual += (actual_us - initial_us) * 1000; -+ flag = !flag; -+ } -+ return (actual-length) / 1000; -+} -+ -+static long send_pulse(unsigned long length) -+{ -+ if (length <= 0) -+ return 0; -+ -+ if (softcarrier) { -+ return send_pulse_softcarrier(length); -+ } else { -+ gpiochip->set(gpiochip, gpio_out_pin, !invert); -+ safe_udelay(length); -+ return 0; -+ } -+} -+ -+static void send_space(long length) -+{ -+ gpiochip->set(gpiochip, gpio_out_pin, invert); -+ if (length <= 0) -+ return; -+ safe_udelay(length); -+} -+ -+static void rbwrite(int l) -+{ -+ if (lirc_buffer_full(&rbuf)) { -+ /* no new signals will be accepted */ -+ dprintk("Buffer overrun\n"); -+ return; -+ } -+ lirc_buffer_write(&rbuf, (void *)&l); -+} -+ -+static void frbwrite(int l) -+{ -+ /* simple noise filter */ -+ static int pulse, space; -+ static unsigned int ptr; -+ -+ if (ptr > 0 && (l & PULSE_BIT)) { -+ pulse += l & PULSE_MASK; -+ if (pulse > 250) { -+ rbwrite(space); -+ rbwrite(pulse | PULSE_BIT); -+ ptr = 0; -+ pulse = 0; -+ } -+ return; -+ } -+ if (!(l & PULSE_BIT)) { -+ if (ptr == 0) { -+ if (l > 20000) { -+ space = l; -+ ptr++; -+ return; -+ } -+ } else { -+ if (l > 20000) { -+ space += pulse; -+ if (space > PULSE_MASK) -+ space = PULSE_MASK; -+ space += l; -+ if (space > PULSE_MASK) -+ space = PULSE_MASK; -+ pulse = 0; -+ return; -+ } -+ rbwrite(space); -+ rbwrite(pulse | PULSE_BIT); -+ ptr = 0; -+ pulse = 0; -+ } -+ } -+ rbwrite(l); -+} -+ -+static irqreturn_t irq_handler(int i, void *blah, struct pt_regs *regs) -+{ -+ struct timeval tv; -+ long deltv; -+ int data; -+ int signal; -+ -+ /* use the GPIO signal level */ -+ signal = gpiochip->get(gpiochip, gpio_in_pin); -+ -+ if (sense != -1) { -+ /* get current time */ -+ do_gettimeofday(&tv); -+ -+ /* calc time since last interrupt in microseconds */ -+ deltv = tv.tv_sec-lasttv.tv_sec; -+ if (tv.tv_sec < lasttv.tv_sec || -+ (tv.tv_sec == lasttv.tv_sec && -+ tv.tv_usec < lasttv.tv_usec)) { -+ printk(KERN_WARNING LIRC_DRIVER_NAME -+ ": AIEEEE: your clock just jumped backwards\n"); -+ printk(KERN_WARNING LIRC_DRIVER_NAME -+ ": %d %d %lx %lx %lx %lx\n", signal, sense, -+ tv.tv_sec, lasttv.tv_sec, -+ tv.tv_usec, lasttv.tv_usec); -+ data = PULSE_MASK; -+ } else if (deltv > 15) { -+ data = PULSE_MASK; /* really long time */ -+ if (!(signal^sense)) { -+ /* sanity check */ -+ printk(KERN_DEBUG LIRC_DRIVER_NAME -+ ": AIEEEE: %d %d %lx %lx %lx %lx\n", -+ signal, sense, tv.tv_sec, lasttv.tv_sec, -+ tv.tv_usec, lasttv.tv_usec); -+ /* -+ * detecting pulse while this -+ * MUST be a space! -+ */ -+ if (auto_sense) { -+ sense = sense ? 0 : 1; -+ } -+ } -+ } else { -+ data = (int) (deltv*1000000 + -+ (tv.tv_usec - lasttv.tv_usec)); -+ } -+ frbwrite(signal^sense ? data : (data|PULSE_BIT)); -+ lasttv = tv; -+ wake_up_interruptible(&rbuf.wait_poll); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+static int is_right_chip(struct gpio_chip *chip, void *data) -+{ -+ dprintk("is_right_chip %s %d\n", chip->label, strcmp(data, chip->label)); -+ -+ if (strcmp(data, chip->label) == 0) -+ return 1; -+ return 0; -+} -+ -+static inline int read_bool_property(const struct device_node *np, -+ const char *propname, -+ bool *out_value) -+{ -+ u32 value = 0; -+ int err = of_property_read_u32(np, propname, &value); -+ if (err == 0) -+ *out_value = (value != 0); -+ return err; -+} -+ -+static void read_pin_settings(struct device_node *node) -+{ -+ u32 pin; -+ int index; -+ -+ for (index = 0; -+ of_property_read_u32_index( -+ node, -+ "brcm,pins", -+ index, -+ &pin) == 0; -+ index++) { -+ u32 function; -+ int err; -+ err = of_property_read_u32_index( -+ node, -+ "brcm,function", -+ index, -+ &function); -+ if (err == 0) { -+ if (function == 1) /* Output */ -+ gpio_out_pin = pin; -+ else if (function == 0) /* Input */ -+ gpio_in_pin = pin; -+ } -+ } -+} -+ -+static int init_port(void) -+{ -+ int i, nlow, nhigh; -+ struct device_node *node; -+ -+ node = lirc_rpi_dev->dev.of_node; -+ -+ gpiochip = gpiochip_find("bcm2708_gpio", is_right_chip); -+ -+ /* -+ * Because of the lack of a setpull function, only support -+ * pinctrl-bcm2835 if using device tree. -+ */ -+ if (!gpiochip && node) -+ gpiochip = gpiochip_find("pinctrl-bcm2835", is_right_chip); -+ -+ if (!gpiochip) { -+ pr_err(LIRC_DRIVER_NAME ": gpio chip not found!\n"); -+ return -ENODEV; -+ } -+ -+ if (node) { -+ struct device_node *pins_node; -+ -+ pins_node = of_parse_phandle(node, "pinctrl-0", 0); -+ if (!pins_node) { -+ printk(KERN_ERR LIRC_DRIVER_NAME -+ ": pinctrl settings not found!\n"); -+ return -EINVAL; -+ } -+ -+ read_pin_settings(pins_node); -+ -+ of_property_read_u32(node, "rpi,sense", &sense); -+ -+ read_bool_property(node, "rpi,softcarrier", &softcarrier); -+ -+ read_bool_property(node, "rpi,invert", &invert); -+ -+ read_bool_property(node, "rpi,debug", &debug); -+ -+ } else { -+ return -EINVAL; -+ } -+ -+ gpiochip->set(gpiochip, gpio_out_pin, invert); -+ -+ irq_num = gpiochip->to_irq(gpiochip, gpio_in_pin); -+ dprintk("to_irq %d\n", irq_num); -+ -+ /* if pin is high, then this must be an active low receiver. */ -+ if (sense == -1) { -+ /* wait 1/2 sec for the power supply */ -+ msleep(500); -+ -+ /* -+ * probe 9 times every 0.04s, collect "votes" for -+ * active high/low -+ */ -+ nlow = 0; -+ nhigh = 0; -+ for (i = 0; i < 9; i++) { -+ if (gpiochip->get(gpiochip, gpio_in_pin)) -+ nlow++; -+ else -+ nhigh++; -+ msleep(40); -+ } -+ sense = (nlow >= nhigh ? 1 : 0); -+ printk(KERN_INFO LIRC_DRIVER_NAME -+ ": auto-detected active %s receiver on GPIO pin %d\n", -+ sense ? "low" : "high", gpio_in_pin); -+ } else { -+ printk(KERN_INFO LIRC_DRIVER_NAME -+ ": manually using active %s receiver on GPIO pin %d\n", -+ sense ? "low" : "high", gpio_in_pin); -+ auto_sense = 0; -+ } -+ -+ return 0; -+} -+ -+// called when the character device is opened -+static int set_use_inc(void *data) -+{ -+ int result; -+ -+ /* initialize timestamp */ -+ do_gettimeofday(&lasttv); -+ -+ result = request_irq(irq_num, -+ (irq_handler_t) irq_handler, -+ IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING, -+ LIRC_DRIVER_NAME, (void*) 0); -+ -+ switch (result) { -+ case -EBUSY: -+ printk(KERN_ERR LIRC_DRIVER_NAME -+ ": IRQ %d is busy\n", -+ irq_num); -+ return -EBUSY; -+ case -EINVAL: -+ printk(KERN_ERR LIRC_DRIVER_NAME -+ ": Bad irq number or handler\n"); -+ return -EINVAL; -+ default: -+ dprintk("Interrupt %d obtained\n", -+ irq_num); -+ break; -+ }; -+ -+ /* initialize pulse/space widths */ -+ init_timing_params(duty_cycle, freq); -+ -+ return 0; -+} -+ -+static void set_use_dec(void *data) -+{ -+ /* GPIO Pin Falling/Rising Edge Detect Disable */ -+ irq_set_irq_type(irq_num, 0); -+ disable_irq(irq_num); -+ -+ free_irq(irq_num, (void *) 0); -+ -+ dprintk(KERN_INFO LIRC_DRIVER_NAME -+ ": freed IRQ %d\n", irq_num); -+} -+ -+static ssize_t lirc_write(struct file *file, const char *buf, -+ size_t n, loff_t *ppos) -+{ -+ int i, count; -+ unsigned long flags; -+ long delta = 0; -+ int *wbuf; -+ -+ count = n / sizeof(int); -+ if (n % sizeof(int) || count % 2 == 0) -+ return -EINVAL; -+ wbuf = memdup_user(buf, n); -+ if (IS_ERR(wbuf)) -+ return PTR_ERR(wbuf); -+ spin_lock_irqsave(&lock, flags); -+ -+ for (i = 0; i < count; i++) { -+ if (i%2) -+ send_space(wbuf[i] - delta); -+ else -+ delta = send_pulse(wbuf[i]); -+ } -+ gpiochip->set(gpiochip, gpio_out_pin, invert); -+ -+ spin_unlock_irqrestore(&lock, flags); -+ kfree(wbuf); -+ return n; -+} -+ -+static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg) -+{ -+ int result; -+ __u32 value; -+ -+ switch (cmd) { -+ case LIRC_GET_SEND_MODE: -+ return -ENOIOCTLCMD; -+ break; -+ -+ case LIRC_SET_SEND_MODE: -+ result = get_user(value, (__u32 *) arg); -+ if (result) -+ return result; -+ /* only LIRC_MODE_PULSE supported */ -+ if (value != LIRC_MODE_PULSE) -+ return -ENOSYS; -+ break; -+ -+ case LIRC_GET_LENGTH: -+ return -ENOSYS; -+ break; -+ -+ case LIRC_SET_SEND_DUTY_CYCLE: -+ dprintk("SET_SEND_DUTY_CYCLE\n"); -+ result = get_user(value, (__u32 *) arg); -+ if (result) -+ return result; -+ if (value <= 0 || value > 100) -+ return -EINVAL; -+ return init_timing_params(value, freq); -+ break; -+ -+ case LIRC_SET_SEND_CARRIER: -+ dprintk("SET_SEND_CARRIER\n"); -+ result = get_user(value, (__u32 *) arg); -+ if (result) -+ return result; -+ if (value > 500000 || value < 20000) -+ return -EINVAL; -+ return init_timing_params(duty_cycle, value); -+ break; -+ -+ default: -+ return lirc_dev_fop_ioctl(filep, cmd, arg); -+ } -+ return 0; -+} -+ -+static const struct file_operations lirc_fops = { -+ .owner = THIS_MODULE, -+ .write = lirc_write, -+ .unlocked_ioctl = lirc_ioctl, -+ .read = lirc_dev_fop_read, -+ .poll = lirc_dev_fop_poll, -+ .open = lirc_dev_fop_open, -+ .release = lirc_dev_fop_close, -+ .llseek = no_llseek, -+}; -+ -+static struct lirc_driver driver = { -+ .name = LIRC_DRIVER_NAME, -+ .minor = -1, -+ .code_length = 1, -+ .sample_rate = 0, -+ .data = NULL, -+ .add_to_buf = NULL, -+ .rbuf = &rbuf, -+ .set_use_inc = set_use_inc, -+ .set_use_dec = set_use_dec, -+ .fops = &lirc_fops, -+ .dev = NULL, -+ .owner = THIS_MODULE, -+}; -+ -+static const struct of_device_id lirc_rpi_of_match[] = { -+ { .compatible = "rpi,lirc-rpi", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, lirc_rpi_of_match); -+ -+static struct platform_driver lirc_rpi_driver = { -+ .driver = { -+ .name = LIRC_DRIVER_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(lirc_rpi_of_match), -+ }, -+}; -+ -+static int __init lirc_rpi_init(void) -+{ -+ struct device_node *node; -+ int result; -+ -+ /* Init read buffer. */ -+ result = lirc_buffer_init(&rbuf, sizeof(int), RBUF_LEN); -+ if (result < 0) -+ return -ENOMEM; -+ -+ result = platform_driver_register(&lirc_rpi_driver); -+ if (result) { -+ printk(KERN_ERR LIRC_DRIVER_NAME -+ ": lirc register returned %d\n", result); -+ goto exit_buffer_free; -+ } -+ -+ node = of_find_compatible_node(NULL, NULL, -+ lirc_rpi_of_match[0].compatible); -+ -+ if (node) { -+ /* DT-enabled */ -+ lirc_rpi_dev = of_find_device_by_node(node); -+ WARN_ON(lirc_rpi_dev->dev.of_node != node); -+ of_node_put(node); -+ } -+ else { -+ lirc_rpi_dev = platform_device_alloc(LIRC_DRIVER_NAME, 0); -+ if (!lirc_rpi_dev) { -+ result = -ENOMEM; -+ goto exit_driver_unregister; -+ } -+ -+ result = platform_device_add(lirc_rpi_dev); -+ if (result) -+ goto exit_device_put; -+ } -+ -+ return 0; -+ -+ exit_device_put: -+ platform_device_put(lirc_rpi_dev); -+ -+ exit_driver_unregister: -+ platform_driver_unregister(&lirc_rpi_driver); -+ -+ exit_buffer_free: -+ lirc_buffer_free(&rbuf); -+ -+ return result; -+} -+ -+static void lirc_rpi_exit(void) -+{ -+ if (!lirc_rpi_dev->dev.of_node) -+ platform_device_unregister(lirc_rpi_dev); -+ platform_driver_unregister(&lirc_rpi_driver); -+ lirc_buffer_free(&rbuf); -+} -+ -+static int __init lirc_rpi_init_module(void) -+{ -+ int result; -+ -+ result = lirc_rpi_init(); -+ if (result) -+ return result; -+ -+ result = init_port(); -+ if (result < 0) -+ goto exit_rpi; -+ -+ driver.features = LIRC_CAN_SET_SEND_DUTY_CYCLE | -+ LIRC_CAN_SET_SEND_CARRIER | -+ LIRC_CAN_SEND_PULSE | -+ LIRC_CAN_REC_MODE2; -+ -+ driver.dev = &lirc_rpi_dev->dev; -+ driver.minor = lirc_register_driver(&driver); -+ -+ if (driver.minor < 0) { -+ printk(KERN_ERR LIRC_DRIVER_NAME -+ ": device registration failed with %d\n", result); -+ result = -EIO; -+ goto exit_rpi; -+ } -+ -+ printk(KERN_INFO LIRC_DRIVER_NAME ": driver registered!\n"); -+ -+ return 0; -+ -+ exit_rpi: -+ lirc_rpi_exit(); -+ -+ return result; -+} -+ -+static void __exit lirc_rpi_exit_module(void) -+{ -+ lirc_unregister_driver(driver.minor); -+ -+ gpio_free(gpio_out_pin); -+ gpio_free(gpio_in_pin); -+ -+ lirc_rpi_exit(); -+ -+ printk(KERN_INFO LIRC_DRIVER_NAME ": cleaned up module\n"); -+} -+ -+module_init(lirc_rpi_init_module); -+module_exit(lirc_rpi_exit_module); -+ -+MODULE_DESCRIPTION("Infra-red receiver and blaster driver for Raspberry Pi GPIO."); -+MODULE_AUTHOR("Aron Robert Szabo "); -+MODULE_AUTHOR("Michael Bishop "); -+MODULE_LICENSE("GPL"); -+ -+module_param(gpio_out_pin, int, S_IRUGO); -+MODULE_PARM_DESC(gpio_out_pin, "GPIO output/transmitter pin number of the BCM" -+ " processor. (default 17"); -+ -+module_param(gpio_in_pin, int, S_IRUGO); -+MODULE_PARM_DESC(gpio_in_pin, "GPIO input pin number of the BCM processor." -+ " (default 18"); -+ -+module_param(gpio_in_pull, int, S_IRUGO); -+MODULE_PARM_DESC(gpio_in_pull, "GPIO input pin pull configuration." -+ " (0 = off, 1 = up, 2 = down, default down)"); -+ -+module_param(sense, int, S_IRUGO); -+MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit" -+ " (0 = active high, 1 = active low )"); -+ -+module_param(softcarrier, bool, S_IRUGO); -+MODULE_PARM_DESC(softcarrier, "Software carrier (0 = off, 1 = on, default on)"); -+ -+module_param(invert, bool, S_IRUGO); -+MODULE_PARM_DESC(invert, "Invert output (0 = off, 1 = on, default off"); -+ -+module_param(debug, bool, S_IRUGO | S_IWUSR); -+MODULE_PARM_DESC(debug, "Enable debugging messages"); ---- /dev/null -+++ b/include/linux/platform_data/bcm2708.h -@@ -0,0 +1,23 @@ -+/* -+ * include/linux/platform_data/bcm2708.h -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * (C) 2014 Julian Scheel -+ * -+ */ -+#ifndef __BCM2708_H_ -+#define __BCM2708_H_ -+ -+typedef enum { -+ BCM2708_PULL_OFF, -+ BCM2708_PULL_UP, -+ BCM2708_PULL_DOWN -+} bcm2708_gpio_pull_t; -+ -+extern int bcm2708_gpio_setpull(struct gpio_chip *gc, unsigned offset, -+ bcm2708_gpio_pull_t value); -+ -+#endif diff --git a/target/linux/brcm2708/patches-4.9/0046-Add-cpufreq-driver.patch b/target/linux/brcm2708/patches-4.9/0046-Add-cpufreq-driver.patch deleted file mode 100644 index 7c5691c120c8..000000000000 --- a/target/linux/brcm2708/patches-4.9/0046-Add-cpufreq-driver.patch +++ /dev/null @@ -1,262 +0,0 @@ -From 7d4719c360b755637c2e68f9855be282cd0065b6 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Wed, 3 Jul 2013 00:49:20 +0100 -Subject: [PATCH] Add cpufreq driver - -Signed-off-by: popcornmix ---- - drivers/cpufreq/Kconfig.arm | 9 ++ - drivers/cpufreq/Makefile | 1 + - drivers/cpufreq/bcm2835-cpufreq.c | 218 ++++++++++++++++++++++++++++++++++++++ - 3 files changed, 228 insertions(+) - create mode 100644 drivers/cpufreq/bcm2835-cpufreq.c - ---- a/drivers/cpufreq/Kconfig.arm -+++ b/drivers/cpufreq/Kconfig.arm -@@ -220,6 +220,15 @@ config ARM_STI_CPUFREQ - this config option if you wish to add CPUFreq support for STi based - SoCs. - -+config ARM_BCM2835_CPUFREQ -+ depends on RASPBERRYPI_FIRMWARE -+ bool "BCM2835 Driver" -+ default y -+ help -+ This adds the CPUFreq driver for BCM2835 -+ -+ If in doubt, say N. -+ - config ARM_TEGRA20_CPUFREQ - bool "Tegra20 CPUFreq support" - depends on ARCH_TEGRA ---- a/drivers/cpufreq/Makefile -+++ b/drivers/cpufreq/Makefile -@@ -75,6 +75,7 @@ obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa11 - obj-$(CONFIG_ARM_SCPI_CPUFREQ) += scpi-cpufreq.o - obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o - obj-$(CONFIG_ARM_STI_CPUFREQ) += sti-cpufreq.o -+obj-$(CONFIG_ARM_BCM2835_CPUFREQ) += bcm2835-cpufreq.o - obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o - obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o - obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o ---- /dev/null -+++ b/drivers/cpufreq/bcm2835-cpufreq.c -@@ -0,0 +1,218 @@ -+/***************************************************************************** -+* Copyright 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+/***************************************************************************** -+* FILENAME: bcm2835-cpufreq.h -+* DESCRIPTION: This driver dynamically manages the CPU Frequency of the ARM -+* processor. Messages are sent to Videocore either setting or requesting the -+* frequency of the ARM in order to match an appropiate frequency to the current -+* usage of the processor. The policy which selects the frequency to use is -+* defined in the kernel .config file, but can be changed during runtime. -+*****************************************************************************/ -+ -+/* ---------- INCLUDES ---------- */ -+#include -+#include -+#include -+#include -+#include -+ -+/* ---------- DEFINES ---------- */ -+/*#define CPUFREQ_DEBUG_ENABLE*/ /* enable debugging */ -+#define MODULE_NAME "bcm2835-cpufreq" -+ -+#define VCMSG_ID_ARM_CLOCK 0x000000003 /* Clock/Voltage ID's */ -+ -+/* debug printk macros */ -+#ifdef CPUFREQ_DEBUG_ENABLE -+#define print_debug(fmt,...) pr_debug("%s:%s:%d: "fmt, MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__) -+#else -+#define print_debug(fmt,...) -+#endif -+#define print_err(fmt,...) pr_err("%s:%s:%d: "fmt, MODULE_NAME, __func__,__LINE__, ##__VA_ARGS__) -+#define print_info(fmt,...) pr_info("%s: "fmt, MODULE_NAME, ##__VA_ARGS__) -+ -+/* ---------- GLOBALS ---------- */ -+static struct cpufreq_driver bcm2835_cpufreq_driver; /* the cpufreq driver global */ -+static unsigned int min_frequency, max_frequency; -+static struct cpufreq_frequency_table bcm2835_freq_table[3]; -+ -+/* -+ =============================================== -+ clk_rate either gets or sets the clock rates. -+ =============================================== -+*/ -+ -+static int bcm2835_cpufreq_clock_property(u32 tag, u32 id, u32 *val) -+{ -+ struct rpi_firmware *fw = rpi_firmware_get(NULL); -+ struct { -+ u32 id; -+ u32 val; -+ } packet; -+ int ret; -+ -+ packet.id = id; -+ packet.val = *val; -+ ret = rpi_firmware_property(fw, tag, &packet, sizeof(packet)); -+ if (ret) -+ return ret; -+ -+ *val = packet.val; -+ -+ return 0; -+} -+ -+static uint32_t bcm2835_cpufreq_set_clock(int cur_rate, int arm_rate) -+{ -+ u32 rate = arm_rate * 1000; -+ int ret; -+ -+ ret = bcm2835_cpufreq_clock_property(RPI_FIRMWARE_SET_CLOCK_RATE, VCMSG_ID_ARM_CLOCK, &rate); -+ if (ret) { -+ print_err("Failed to set clock: %d (%d)\n", arm_rate, ret); -+ return 0; -+ } -+ -+ rate /= 1000; -+ print_debug("Setting new frequency = %d -> %d (actual %d)\n", cur_rate, arm_rate, rate); -+ -+ return rate; -+} -+ -+static uint32_t bcm2835_cpufreq_get_clock(int tag) -+{ -+ u32 rate; -+ int ret; -+ -+ ret = bcm2835_cpufreq_clock_property(tag, VCMSG_ID_ARM_CLOCK, &rate); -+ if (ret) { -+ print_err("Failed to get clock (%d)\n", ret); -+ return 0; -+ } -+ -+ rate /= 1000; -+ print_debug("%s frequency = %u\n", -+ tag == RPI_FIRMWARE_GET_CLOCK_RATE ? "Current": -+ tag == RPI_FIRMWARE_GET_MIN_CLOCK_RATE ? "Min": -+ tag == RPI_FIRMWARE_GET_MAX_CLOCK_RATE ? "Max": -+ "Unexpected", rate); -+ -+ return rate; -+} -+ -+/* -+ ==================================================== -+ Module Initialisation registers the cpufreq driver -+ ==================================================== -+*/ -+static int __init bcm2835_cpufreq_module_init(void) -+{ -+ print_debug("IN\n"); -+ return cpufreq_register_driver(&bcm2835_cpufreq_driver); -+} -+ -+/* -+ ============= -+ Module exit -+ ============= -+*/ -+static void __exit bcm2835_cpufreq_module_exit(void) -+{ -+ print_debug("IN\n"); -+ cpufreq_unregister_driver(&bcm2835_cpufreq_driver); -+ return; -+} -+ -+/* -+ ============================================================== -+ Initialisation function sets up the CPU policy for first use -+ ============================================================== -+*/ -+static int bcm2835_cpufreq_driver_init(struct cpufreq_policy *policy) -+{ -+ /* measured value of how long it takes to change frequency */ -+ const unsigned int transition_latency = 355000; /* ns */ -+ -+ if (!rpi_firmware_get(NULL)) { -+ print_err("Firmware is not available\n"); -+ return -ENODEV; -+ } -+ -+ /* now find out what the maximum and minimum frequencies are */ -+ min_frequency = bcm2835_cpufreq_get_clock(RPI_FIRMWARE_GET_MIN_CLOCK_RATE); -+ max_frequency = bcm2835_cpufreq_get_clock(RPI_FIRMWARE_GET_MAX_CLOCK_RATE); -+ -+ if (min_frequency == max_frequency) { -+ bcm2835_freq_table[0].frequency = min_frequency; -+ bcm2835_freq_table[1].frequency = CPUFREQ_TABLE_END; -+ } else { -+ bcm2835_freq_table[0].frequency = min_frequency; -+ bcm2835_freq_table[1].frequency = max_frequency; -+ bcm2835_freq_table[2].frequency = CPUFREQ_TABLE_END; -+ } -+ -+ print_info("min=%d max=%d\n", min_frequency, max_frequency); -+ return cpufreq_generic_init(policy, bcm2835_freq_table, transition_latency); -+} -+ -+/* -+ ===================================================================== -+ Target index function chooses the requested frequency from the table -+ ===================================================================== -+*/ -+ -+static int bcm2835_cpufreq_driver_target_index(struct cpufreq_policy *policy, unsigned int state) -+{ -+ unsigned int target_freq = state == 0 ? min_frequency : max_frequency; -+ unsigned int cur = bcm2835_cpufreq_set_clock(policy->cur, target_freq); -+ -+ if (!cur) -+ { -+ print_err("Error occurred setting a new frequency (%d)\n", target_freq); -+ return -EINVAL; -+ } -+ print_debug("%s: %i: freq %d->%d\n", policy->governor->name, state, policy->cur, cur); -+ return 0; -+} -+ -+/* -+ ====================================================== -+ Get function returns the current frequency from table -+ ====================================================== -+*/ -+ -+static unsigned int bcm2835_cpufreq_driver_get(unsigned int cpu) -+{ -+ unsigned int actual_rate = bcm2835_cpufreq_get_clock(RPI_FIRMWARE_GET_CLOCK_RATE); -+ print_debug("cpu%d: freq=%d\n", cpu, actual_rate); -+ return actual_rate <= min_frequency ? min_frequency : max_frequency; -+} -+ -+/* the CPUFreq driver */ -+static struct cpufreq_driver bcm2835_cpufreq_driver = { -+ .name = "BCM2835 CPUFreq", -+ .init = bcm2835_cpufreq_driver_init, -+ .verify = cpufreq_generic_frequency_table_verify, -+ .target_index = bcm2835_cpufreq_driver_target_index, -+ .get = bcm2835_cpufreq_driver_get, -+ .attr = cpufreq_generic_attr, -+}; -+ -+MODULE_AUTHOR("Dorian Peake and Dom Cobley"); -+MODULE_DESCRIPTION("CPU frequency driver for BCM2835 chip"); -+MODULE_LICENSE("GPL"); -+ -+module_init(bcm2835_cpufreq_module_init); -+module_exit(bcm2835_cpufreq_module_exit); diff --git a/target/linux/brcm2708/patches-4.9/0047-Added-hwmon-thermal-driver-for-reporting-core-temper.patch b/target/linux/brcm2708/patches-4.9/0047-Added-hwmon-thermal-driver-for-reporting-core-temper.patch deleted file mode 100644 index ff6084fe6a8a..000000000000 --- a/target/linux/brcm2708/patches-4.9/0047-Added-hwmon-thermal-driver-for-reporting-core-temper.patch +++ /dev/null @@ -1,161 +0,0 @@ -From 3c847bc6c9d6f4115c82943c869c55244b39a5c4 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Tue, 26 Mar 2013 19:24:24 +0000 -Subject: [PATCH] Added hwmon/thermal driver for reporting core temperature. - Thanks Dorian -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -BCM270x: Move thermal sensor to Device Tree - -Add Device Tree support to bcm2835-thermal driver. -Add thermal sensor device to Device Tree. -Don't add platform device when booting in DT mode. - -Signed-off-by: Noralf Trønnes ---- - drivers/thermal/Kconfig | 7 +++ - drivers/thermal/Makefile | 1 + - drivers/thermal/bcm2835-thermal.c | 109 ++++++++++++++++++++++++++++++++++++++ - 3 files changed, 117 insertions(+) - create mode 100644 drivers/thermal/bcm2835-thermal.c - ---- a/drivers/thermal/Kconfig -+++ b/drivers/thermal/Kconfig -@@ -302,6 +302,13 @@ config INTEL_POWERCLAMP - enforce idle time which results in more package C-state residency. The - user interface is exposed via generic thermal framework. - -+config THERMAL_BCM2835 -+ depends on RASPBERRYPI_FIRMWARE -+ tristate "BCM2835 Thermal Driver" -+ help -+ This will enable temperature monitoring for the Broadcom BCM2835 -+ chip. If built as a module, it will be called 'bcm2835-thermal'. -+ - config X86_PKG_TEMP_THERMAL - tristate "X86 package temperature thermal driver" - depends on X86_THERMAL_VECTOR ---- a/drivers/thermal/Makefile -+++ b/drivers/thermal/Makefile -@@ -41,6 +41,7 @@ obj-$(CONFIG_MAX77620_THERMAL) += max776 - obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o - obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o - obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o -+obj-$(CONFIG_THERMAL_BCM2835) += bcm2835-thermal.o - obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o - obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o - obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o ---- /dev/null -+++ b/drivers/thermal/bcm2835-thermal.c -@@ -0,0 +1,109 @@ -+/***************************************************************************** -+* Copyright 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#include -+#include -+#include -+#include -+ -+static int bcm2835_thermal_get_property(struct thermal_zone_device *tz, -+ int *temp, u32 tag) -+{ -+ struct rpi_firmware *fw = tz->devdata; -+ struct { -+ u32 id; -+ u32 val; -+ } packet; -+ int ret; -+ -+ *temp = 0; -+ packet.id = 0; -+ ret = rpi_firmware_property(fw, tag, &packet, sizeof(packet)); -+ if (ret) { -+ dev_err(&tz->device, "Failed to get temperature\n"); -+ return ret; -+ } -+ -+ *temp = packet.val; -+ dev_dbg(&tz->device, "%stemp=%d\n", -+ tag == RPI_FIRMWARE_GET_MAX_TEMPERATURE ? "max" : "", *temp); -+ -+ return 0; -+} -+ -+static int bcm2835_thermal_get_temp(struct thermal_zone_device *tz, -+ int *temp) -+{ -+ return bcm2835_thermal_get_property(tz, temp, -+ RPI_FIRMWARE_GET_TEMPERATURE); -+} -+ -+static struct thermal_zone_device_ops ops = { -+ .get_temp = bcm2835_thermal_get_temp, -+}; -+ -+static int bcm2835_thermal_probe(struct platform_device *pdev) -+{ -+ struct device_node *fw_np; -+ struct rpi_firmware *fw; -+ struct thermal_zone_device *tz; -+ -+ fw_np = of_parse_phandle(pdev->dev.of_node, "firmware", 0); -+ if (!fw_np) { -+ dev_err(&pdev->dev, "Missing firmware node\n"); -+ return -ENOENT; -+ } -+ fw = rpi_firmware_get(fw_np); -+ if (!fw) -+ return -EPROBE_DEFER; -+ -+ tz = thermal_zone_device_register("bcm2835_thermal", 0, 0, fw, &ops, -+ NULL, 0, 0); -+ if (IS_ERR(tz)) { -+ dev_err(&pdev->dev, "Failed to register the thermal device\n"); -+ return PTR_ERR(tz); -+ } -+ -+ platform_set_drvdata(pdev, tz); -+ -+ return 0; -+} -+ -+static int bcm2835_thermal_remove(struct platform_device *pdev) -+{ -+ thermal_zone_device_unregister(platform_get_drvdata(pdev)); -+ -+ return 0; -+} -+ -+static const struct of_device_id bcm2835_thermal_of_match_table[] = { -+ { .compatible = "brcm,bcm2835-thermal", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, bcm2835_thermal_of_match_table); -+ -+static struct platform_driver bcm2835_thermal_driver = { -+ .probe = bcm2835_thermal_probe, -+ .remove = bcm2835_thermal_remove, -+ .driver = { -+ .name = "bcm2835_thermal", -+ .of_match_table = bcm2835_thermal_of_match_table, -+ }, -+}; -+module_platform_driver(bcm2835_thermal_driver); -+ -+MODULE_AUTHOR("Dorian Peake"); -+MODULE_AUTHOR("Noralf Trønnes"); -+MODULE_DESCRIPTION("Thermal driver for bcm2835 chip"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/brcm2708/patches-4.9/0048-Add-Chris-Boot-s-i2c-driver.patch b/target/linux/brcm2708/patches-4.9/0048-Add-Chris-Boot-s-i2c-driver.patch deleted file mode 100644 index b86fb40b6216..000000000000 --- a/target/linux/brcm2708/patches-4.9/0048-Add-Chris-Boot-s-i2c-driver.patch +++ /dev/null @@ -1,660 +0,0 @@ -From af4e8a3c7b645480f57ec14ded02fba6976ff2d5 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Wed, 17 Jun 2015 15:44:08 +0100 -Subject: [PATCH] Add Chris Boot's i2c driver -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -i2c-bcm2708: fixed baudrate - -Fixed issue where the wrong CDIV value was set for baudrates below 3815 Hz (for 250MHz bus clock). -In that case the computed CDIV value was more than 0xffff. However the CDIV register width is only 16 bits. -This resulted in incorrect setting of CDIV and higher baudrate than intended. -Example: 3500Hz -> CDIV=0x11704 -> CDIV(16bit)=0x1704 -> 42430Hz -After correction: 3500Hz -> CDIV=0x11704 -> CDIV(16bit)=0xffff -> 3815Hz -The correct baudrate is shown in the log after the cdiv > 0xffff correction. - -Perform I2C combined transactions when possible - -Perform I2C combined transactions whenever possible, within the -restrictions of the Broadcomm Serial Controller. - -Disable DONE interrupt during TA poll - -Prevent interrupt from being triggered if poll is missed and transfer -starts and finishes. - -i2c: Make combined transactions optional and disabled by default - -i2c: bcm2708: add device tree support - -Add DT support to driver and add to .dtsi file. -Setup pins in .dts file. -i2c is disabled by default. - -Signed-off-by: Noralf Tronnes - -bcm2708: don't register i2c controllers when using DT - -The devices for the i2c controllers are in the Device Tree. -Only register devices when not using DT. - -Signed-off-by: Noralf Tronnes - -I2C: Only register the I2C device for the current board revision - -i2c_bcm2708: Fix clock reference counting - -Fix grabbing lock from atomic context in i2c driver - -2 main changes: -- check for timeouts in the bcm2708_bsc_setup function as indicated by this comment: - /* poll for transfer start bit (should only take 1-20 polls) */ - This implies that the setup function can now fail so account for this everywhere it's called -- Removed the clk_get_rate call from inside the setup function as it locks a mutex and that's not ok since we call it from under a spin lock. - -i2c-bcm2708: When using DT, leave the GPIO setup to pinctrl - -i2c-bcm2708: Increase timeouts to allow larger transfers - -Use the timeout value provided by the I2C_TIMEOUT ioctl when waiting -for completion. The default timeout is 1 second. - -See: https://github.com/raspberrypi/linux/issues/260 - -i2c-bcm2708/BCM270X_DT: Add support for I2C2 - -The third I2C bus (I2C2) is normally reserved for HDMI use. Careless -use of this bus can break an attached display - use with caution. - -It is recommended to disable accesses by VideoCore by setting -hdmi_ignore_edid=1 or hdmi_edid_file=1 in config.txt. - -The interface is disabled by default - enable using the -i2c2_iknowwhatimdoing DT parameter. - -bcm2708-spi: Don't use static pin configuration with DT - -Also remove superfluous error checking - the SPI framework ensures the -validity of the chip_select value. - -i2c-bcm2708: Remove non-DT support - -Signed-off-by: Noralf Trønnes - -Set the BSC_CLKT clock streching timeout to 35ms as per SMBus specs. - -Fixes i2c_bcm2708: Write to FIFO correctly - v2 (#1574) - -* i2c: fix i2c_bcm2708: Clear FIFO before sending data - -Make sure FIFO gets cleared before trying to send -data in case of a repeated start (COMBINED=Y). - -* i2c: fix i2c_bcm2708: Only write to FIFO when not full - -Check if FIFO can accept data before writing. -To avoid a peripheral read on the last iteration of a loop, -both bcm2708_bsc_fifo_fill and ~drain are changed as well. ---- - drivers/i2c/busses/Kconfig | 19 ++ - drivers/i2c/busses/Makefile | 2 + - drivers/i2c/busses/i2c-bcm2708.c | 512 +++++++++++++++++++++++++++++++++++++++ - 3 files changed, 533 insertions(+) - create mode 100644 drivers/i2c/busses/i2c-bcm2708.c - ---- a/drivers/i2c/busses/Kconfig -+++ b/drivers/i2c/busses/Kconfig -@@ -8,6 +8,25 @@ menu "I2C Hardware Bus support" - comment "PC SMBus host controller drivers" - depends on PCI - -+config I2C_BCM2708 -+ tristate "BCM2708 BSC" -+ depends on ARCH_BCM2835 -+ help -+ Enabling this option will add BSC (Broadcom Serial Controller) -+ support for the BCM2708. BSC is a Broadcom proprietary bus compatible -+ with I2C/TWI/SMBus. -+ -+config I2C_BCM2708_BAUDRATE -+ prompt "BCM2708 I2C baudrate" -+ depends on I2C_BCM2708 -+ int -+ default 100000 -+ help -+ Set the I2C baudrate. This will alter the default value. A -+ different baudrate can be set by using a module parameter as well. If -+ no parameter is provided when loading, this is the value that will be -+ used. -+ - config I2C_ALI1535 - tristate "ALI 1535" - depends on PCI ---- a/drivers/i2c/busses/Makefile -+++ b/drivers/i2c/busses/Makefile -@@ -2,6 +2,8 @@ - # Makefile for the i2c bus drivers. - # - -+obj-$(CONFIG_I2C_BCM2708) += i2c-bcm2708.o -+ - # ACPI drivers - obj-$(CONFIG_I2C_SCMI) += i2c-scmi.o - ---- /dev/null -+++ b/drivers/i2c/busses/i2c-bcm2708.c -@@ -0,0 +1,512 @@ -+/* -+ * Driver for Broadcom BCM2708 BSC Controllers -+ * -+ * Copyright (C) 2012 Chris Boot & Frank Buss -+ * -+ * This driver is inspired by: -+ * i2c-ocores.c, by Peter Korsgaard -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* BSC register offsets */ -+#define BSC_C 0x00 -+#define BSC_S 0x04 -+#define BSC_DLEN 0x08 -+#define BSC_A 0x0c -+#define BSC_FIFO 0x10 -+#define BSC_DIV 0x14 -+#define BSC_DEL 0x18 -+#define BSC_CLKT 0x1c -+ -+/* Bitfields in BSC_C */ -+#define BSC_C_I2CEN 0x00008000 -+#define BSC_C_INTR 0x00000400 -+#define BSC_C_INTT 0x00000200 -+#define BSC_C_INTD 0x00000100 -+#define BSC_C_ST 0x00000080 -+#define BSC_C_CLEAR_1 0x00000020 -+#define BSC_C_CLEAR_2 0x00000010 -+#define BSC_C_READ 0x00000001 -+ -+/* Bitfields in BSC_S */ -+#define BSC_S_CLKT 0x00000200 -+#define BSC_S_ERR 0x00000100 -+#define BSC_S_RXF 0x00000080 -+#define BSC_S_TXE 0x00000040 -+#define BSC_S_RXD 0x00000020 -+#define BSC_S_TXD 0x00000010 -+#define BSC_S_RXR 0x00000008 -+#define BSC_S_TXW 0x00000004 -+#define BSC_S_DONE 0x00000002 -+#define BSC_S_TA 0x00000001 -+ -+#define I2C_WAIT_LOOP_COUNT 200 -+ -+#define DRV_NAME "bcm2708_i2c" -+ -+static unsigned int baudrate; -+module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP); -+MODULE_PARM_DESC(baudrate, "The I2C baudrate"); -+ -+static bool combined = false; -+module_param(combined, bool, 0644); -+MODULE_PARM_DESC(combined, "Use combined transactions"); -+ -+struct bcm2708_i2c { -+ struct i2c_adapter adapter; -+ -+ spinlock_t lock; -+ void __iomem *base; -+ int irq; -+ struct clk *clk; -+ u32 cdiv; -+ u32 clk_tout; -+ -+ struct completion done; -+ -+ struct i2c_msg *msg; -+ int pos; -+ int nmsgs; -+ bool error; -+}; -+ -+static inline u32 bcm2708_rd(struct bcm2708_i2c *bi, unsigned reg) -+{ -+ return readl(bi->base + reg); -+} -+ -+static inline void bcm2708_wr(struct bcm2708_i2c *bi, unsigned reg, u32 val) -+{ -+ writel(val, bi->base + reg); -+} -+ -+static inline void bcm2708_bsc_reset(struct bcm2708_i2c *bi) -+{ -+ bcm2708_wr(bi, BSC_C, 0); -+ bcm2708_wr(bi, BSC_S, BSC_S_CLKT | BSC_S_ERR | BSC_S_DONE); -+} -+ -+static inline void bcm2708_bsc_fifo_drain(struct bcm2708_i2c *bi) -+{ -+ while ((bi->pos < bi->msg->len) && (bcm2708_rd(bi, BSC_S) & BSC_S_RXD)) -+ bi->msg->buf[bi->pos++] = bcm2708_rd(bi, BSC_FIFO); -+} -+ -+static inline void bcm2708_bsc_fifo_fill(struct bcm2708_i2c *bi) -+{ -+ while ((bi->pos < bi->msg->len) && (bcm2708_rd(bi, BSC_S) & BSC_S_TXD)) -+ bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]); -+} -+ -+static inline int bcm2708_bsc_setup(struct bcm2708_i2c *bi) -+{ -+ u32 cdiv, s, clk_tout; -+ u32 c = BSC_C_I2CEN | BSC_C_INTD | BSC_C_ST | BSC_C_CLEAR_1; -+ int wait_loops = I2C_WAIT_LOOP_COUNT; -+ -+ /* Can't call clk_get_rate as it locks a mutex and here we are spinlocked. -+ * Use the value that we cached in the probe. -+ */ -+ cdiv = bi->cdiv; -+ clk_tout = bi->clk_tout; -+ -+ if (bi->msg->flags & I2C_M_RD) -+ c |= BSC_C_INTR | BSC_C_READ; -+ else -+ c |= BSC_C_INTT; -+ -+ bcm2708_wr(bi, BSC_CLKT, clk_tout); -+ bcm2708_wr(bi, BSC_DIV, cdiv); -+ bcm2708_wr(bi, BSC_A, bi->msg->addr); -+ bcm2708_wr(bi, BSC_DLEN, bi->msg->len); -+ if (combined) -+ { -+ /* Do the next two messages meet combined transaction criteria? -+ - Current message is a write, next message is a read -+ - Both messages to same slave address -+ - Write message can fit inside FIFO (16 bytes or less) */ -+ if ( (bi->nmsgs > 1) && -+ !(bi->msg[0].flags & I2C_M_RD) && (bi->msg[1].flags & I2C_M_RD) && -+ (bi->msg[0].addr == bi->msg[1].addr) && (bi->msg[0].len <= 16)) { -+ -+ /* Clear FIFO */ -+ bcm2708_wr(bi, BSC_C, BSC_C_CLEAR_1); -+ -+ /* Fill FIFO with entire write message (16 byte FIFO) */ -+ while (bi->pos < bi->msg->len) { -+ bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]); -+ } -+ /* Start write transfer (no interrupts, don't clear FIFO) */ -+ bcm2708_wr(bi, BSC_C, BSC_C_I2CEN | BSC_C_ST); -+ -+ /* poll for transfer start bit (should only take 1-20 polls) */ -+ do { -+ s = bcm2708_rd(bi, BSC_S); -+ } while (!(s & (BSC_S_TA | BSC_S_ERR | BSC_S_CLKT | BSC_S_DONE)) && --wait_loops >= 0); -+ -+ /* did we time out or some error occured? */ -+ if (wait_loops < 0 || (s & (BSC_S_ERR | BSC_S_CLKT))) { -+ return -1; -+ } -+ -+ /* Send next read message before the write transfer finishes. */ -+ bi->nmsgs--; -+ bi->msg++; -+ bi->pos = 0; -+ bcm2708_wr(bi, BSC_DLEN, bi->msg->len); -+ c = BSC_C_I2CEN | BSC_C_INTD | BSC_C_INTR | BSC_C_ST | BSC_C_READ; -+ } -+ } -+ bcm2708_wr(bi, BSC_C, c); -+ -+ return 0; -+} -+ -+static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id) -+{ -+ struct bcm2708_i2c *bi = dev_id; -+ bool handled = true; -+ u32 s; -+ int ret; -+ -+ spin_lock(&bi->lock); -+ -+ /* we may see camera interrupts on the "other" I2C channel -+ Just return if we've not sent anything */ -+ if (!bi->nmsgs || !bi->msg) { -+ goto early_exit; -+ } -+ -+ s = bcm2708_rd(bi, BSC_S); -+ -+ if (s & (BSC_S_CLKT | BSC_S_ERR)) { -+ bcm2708_bsc_reset(bi); -+ bi->error = true; -+ -+ bi->msg = 0; /* to inform the that all work is done */ -+ bi->nmsgs = 0; -+ /* wake up our bh */ -+ complete(&bi->done); -+ } else if (s & BSC_S_DONE) { -+ bi->nmsgs--; -+ -+ if (bi->msg->flags & I2C_M_RD) { -+ bcm2708_bsc_fifo_drain(bi); -+ } -+ -+ bcm2708_bsc_reset(bi); -+ -+ if (bi->nmsgs) { -+ /* advance to next message */ -+ bi->msg++; -+ bi->pos = 0; -+ ret = bcm2708_bsc_setup(bi); -+ if (ret < 0) { -+ bcm2708_bsc_reset(bi); -+ bi->error = true; -+ bi->msg = 0; /* to inform the that all work is done */ -+ bi->nmsgs = 0; -+ /* wake up our bh */ -+ complete(&bi->done); -+ goto early_exit; -+ } -+ } else { -+ bi->msg = 0; /* to inform the that all work is done */ -+ bi->nmsgs = 0; -+ /* wake up our bh */ -+ complete(&bi->done); -+ } -+ } else if (s & BSC_S_TXW) { -+ bcm2708_bsc_fifo_fill(bi); -+ } else if (s & BSC_S_RXR) { -+ bcm2708_bsc_fifo_drain(bi); -+ } else { -+ handled = false; -+ } -+ -+early_exit: -+ spin_unlock(&bi->lock); -+ -+ return handled ? IRQ_HANDLED : IRQ_NONE; -+} -+ -+static int bcm2708_i2c_master_xfer(struct i2c_adapter *adap, -+ struct i2c_msg *msgs, int num) -+{ -+ struct bcm2708_i2c *bi = adap->algo_data; -+ unsigned long flags; -+ int ret; -+ -+ spin_lock_irqsave(&bi->lock, flags); -+ -+ reinit_completion(&bi->done); -+ bi->msg = msgs; -+ bi->pos = 0; -+ bi->nmsgs = num; -+ bi->error = false; -+ -+ ret = bcm2708_bsc_setup(bi); -+ -+ spin_unlock_irqrestore(&bi->lock, flags); -+ -+ /* check the result of the setup */ -+ if (ret < 0) -+ { -+ dev_err(&adap->dev, "transfer setup timed out\n"); -+ goto error_timeout; -+ } -+ -+ ret = wait_for_completion_timeout(&bi->done, adap->timeout); -+ if (ret == 0) { -+ dev_err(&adap->dev, "transfer timed out\n"); -+ goto error_timeout; -+ } -+ -+ ret = bi->error ? -EIO : num; -+ return ret; -+ -+error_timeout: -+ spin_lock_irqsave(&bi->lock, flags); -+ bcm2708_bsc_reset(bi); -+ bi->msg = 0; /* to inform the interrupt handler that there's nothing else to be done */ -+ bi->nmsgs = 0; -+ spin_unlock_irqrestore(&bi->lock, flags); -+ return -ETIMEDOUT; -+} -+ -+static u32 bcm2708_i2c_functionality(struct i2c_adapter *adap) -+{ -+ return I2C_FUNC_I2C | /*I2C_FUNC_10BIT_ADDR |*/ I2C_FUNC_SMBUS_EMUL; -+} -+ -+static struct i2c_algorithm bcm2708_i2c_algorithm = { -+ .master_xfer = bcm2708_i2c_master_xfer, -+ .functionality = bcm2708_i2c_functionality, -+}; -+ -+static int bcm2708_i2c_probe(struct platform_device *pdev) -+{ -+ struct resource *regs; -+ int irq, err = -ENOMEM; -+ struct clk *clk; -+ struct bcm2708_i2c *bi; -+ struct i2c_adapter *adap; -+ unsigned long bus_hz; -+ u32 cdiv, clk_tout; -+ u32 baud; -+ -+ baud = CONFIG_I2C_BCM2708_BAUDRATE; -+ -+ if (pdev->dev.of_node) { -+ u32 bus_clk_rate; -+ pdev->id = of_alias_get_id(pdev->dev.of_node, "i2c"); -+ if (pdev->id < 0) { -+ dev_err(&pdev->dev, "alias is missing\n"); -+ return -EINVAL; -+ } -+ if (!of_property_read_u32(pdev->dev.of_node, -+ "clock-frequency", &bus_clk_rate)) -+ baud = bus_clk_rate; -+ else -+ dev_warn(&pdev->dev, -+ "Could not read clock-frequency property\n"); -+ } -+ -+ if (baudrate) -+ baud = baudrate; -+ -+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!regs) { -+ dev_err(&pdev->dev, "could not get IO memory\n"); -+ return -ENXIO; -+ } -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) { -+ dev_err(&pdev->dev, "could not get IRQ\n"); -+ return irq; -+ } -+ -+ clk = clk_get(&pdev->dev, NULL); -+ if (IS_ERR(clk)) { -+ dev_err(&pdev->dev, "could not find clk: %ld\n", PTR_ERR(clk)); -+ return PTR_ERR(clk); -+ } -+ -+ err = clk_prepare_enable(clk); -+ if (err) { -+ dev_err(&pdev->dev, "could not enable clk: %d\n", err); -+ goto out_clk_put; -+ } -+ -+ bi = kzalloc(sizeof(*bi), GFP_KERNEL); -+ if (!bi) -+ goto out_clk_disable; -+ -+ platform_set_drvdata(pdev, bi); -+ -+ adap = &bi->adapter; -+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_DDC; -+ adap->algo = &bcm2708_i2c_algorithm; -+ adap->algo_data = bi; -+ adap->dev.parent = &pdev->dev; -+ adap->nr = pdev->id; -+ strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name)); -+ adap->dev.of_node = pdev->dev.of_node; -+ -+ switch (pdev->id) { -+ case 0: -+ adap->class = I2C_CLASS_HWMON; -+ break; -+ case 1: -+ adap->class = I2C_CLASS_DDC; -+ break; -+ case 2: -+ adap->class = I2C_CLASS_DDC; -+ break; -+ default: -+ dev_err(&pdev->dev, "can only bind to BSC 0, 1 or 2\n"); -+ err = -ENXIO; -+ goto out_free_bi; -+ } -+ -+ spin_lock_init(&bi->lock); -+ init_completion(&bi->done); -+ -+ bi->base = ioremap(regs->start, resource_size(regs)); -+ if (!bi->base) { -+ dev_err(&pdev->dev, "could not remap memory\n"); -+ goto out_free_bi; -+ } -+ -+ bi->irq = irq; -+ bi->clk = clk; -+ -+ err = request_irq(irq, bcm2708_i2c_interrupt, IRQF_SHARED, -+ dev_name(&pdev->dev), bi); -+ if (err) { -+ dev_err(&pdev->dev, "could not request IRQ: %d\n", err); -+ goto out_iounmap; -+ } -+ -+ bcm2708_bsc_reset(bi); -+ -+ err = i2c_add_numbered_adapter(adap); -+ if (err < 0) { -+ dev_err(&pdev->dev, "could not add I2C adapter: %d\n", err); -+ goto out_free_irq; -+ } -+ -+ bus_hz = clk_get_rate(bi->clk); -+ cdiv = bus_hz / baud; -+ if (cdiv > 0xffff) { -+ cdiv = 0xffff; -+ baud = bus_hz / cdiv; -+ } -+ -+ clk_tout = 35/1000*baud; //35ms timeout as per SMBus specs. -+ if (clk_tout > 0xffff) -+ clk_tout = 0xffff; -+ -+ bi->cdiv = cdiv; -+ bi->clk_tout = clk_tout; -+ -+ dev_info(&pdev->dev, "BSC%d Controller at 0x%08lx (irq %d) (baudrate %d)\n", -+ pdev->id, (unsigned long)regs->start, irq, baud); -+ -+ return 0; -+ -+out_free_irq: -+ free_irq(bi->irq, bi); -+out_iounmap: -+ iounmap(bi->base); -+out_free_bi: -+ kfree(bi); -+out_clk_disable: -+ clk_disable_unprepare(clk); -+out_clk_put: -+ clk_put(clk); -+ return err; -+} -+ -+static int bcm2708_i2c_remove(struct platform_device *pdev) -+{ -+ struct bcm2708_i2c *bi = platform_get_drvdata(pdev); -+ -+ platform_set_drvdata(pdev, NULL); -+ -+ i2c_del_adapter(&bi->adapter); -+ free_irq(bi->irq, bi); -+ iounmap(bi->base); -+ clk_disable_unprepare(bi->clk); -+ clk_put(bi->clk); -+ kfree(bi); -+ -+ return 0; -+} -+ -+static const struct of_device_id bcm2708_i2c_of_match[] = { -+ { .compatible = "brcm,bcm2708-i2c" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, bcm2708_i2c_of_match); -+ -+static struct platform_driver bcm2708_i2c_driver = { -+ .driver = { -+ .name = DRV_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = bcm2708_i2c_of_match, -+ }, -+ .probe = bcm2708_i2c_probe, -+ .remove = bcm2708_i2c_remove, -+}; -+ -+// module_platform_driver(bcm2708_i2c_driver); -+ -+ -+static int __init bcm2708_i2c_init(void) -+{ -+ return platform_driver_register(&bcm2708_i2c_driver); -+} -+ -+static void __exit bcm2708_i2c_exit(void) -+{ -+ platform_driver_unregister(&bcm2708_i2c_driver); -+} -+ -+module_init(bcm2708_i2c_init); -+module_exit(bcm2708_i2c_exit); -+ -+ -+ -+MODULE_DESCRIPTION("BSC controller driver for Broadcom BCM2708"); -+MODULE_AUTHOR("Chris Boot "); -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:" DRV_NAME); diff --git a/target/linux/brcm2708/patches-4.9/0049-char-broadcom-Add-vcio-module.patch b/target/linux/brcm2708/patches-4.9/0049-char-broadcom-Add-vcio-module.patch deleted file mode 100644 index c37c0f613372..000000000000 --- a/target/linux/brcm2708/patches-4.9/0049-char-broadcom-Add-vcio-module.patch +++ /dev/null @@ -1,221 +0,0 @@ -From 2e8101a5e6228109d2cd5b965b6077e63e643d6b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= -Date: Fri, 26 Jun 2015 14:27:06 +0200 -Subject: [PATCH] char: broadcom: Add vcio module -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add module for accessing the mailbox property channel through -/dev/vcio. Was previously in bcm2708-vcio. - -Signed-off-by: Noralf Trønnes ---- - drivers/char/broadcom/Kconfig | 6 ++ - drivers/char/broadcom/Makefile | 1 + - drivers/char/broadcom/vcio.c | 175 +++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 182 insertions(+) - create mode 100644 drivers/char/broadcom/vcio.c - ---- a/drivers/char/broadcom/Kconfig -+++ b/drivers/char/broadcom/Kconfig -@@ -22,6 +22,12 @@ config BCM2708_VCMEM - help - Helper for videocore memory access and total size allocation. - -+config BCM_VCIO -+ tristate "Mailbox userspace access" -+ depends on BCM2835_MBOX -+ help -+ Gives access to the mailbox property channel from userspace. -+ - endif - - config BCM_VC_SM ---- a/drivers/char/broadcom/Makefile -+++ b/drivers/char/broadcom/Makefile -@@ -1,5 +1,6 @@ - obj-$(CONFIG_BCM_VC_CMA) += vc_cma/ - obj-$(CONFIG_BCM2708_VCMEM) += vc_mem.o -+obj-$(CONFIG_BCM_VCIO) += vcio.o - obj-$(CONFIG_BCM_VC_SM) += vc_sm/ - - obj-$(CONFIG_BCM2835_DEVGPIOMEM)+= bcm2835-gpiomem.o ---- /dev/null -+++ b/drivers/char/broadcom/vcio.c -@@ -0,0 +1,175 @@ -+/* -+ * Copyright (C) 2010 Broadcom -+ * Copyright (C) 2015 Noralf Trønnes -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define MBOX_CHAN_PROPERTY 8 -+ -+#define VCIO_IOC_MAGIC 100 -+#define IOCTL_MBOX_PROPERTY _IOWR(VCIO_IOC_MAGIC, 0, char *) -+ -+static struct { -+ dev_t devt; -+ struct cdev cdev; -+ struct class *class; -+ struct rpi_firmware *fw; -+} vcio; -+ -+static int vcio_user_property_list(void *user) -+{ -+ u32 *buf, size; -+ int ret; -+ -+ /* The first 32-bit is the size of the buffer */ -+ if (copy_from_user(&size, user, sizeof(size))) -+ return -EFAULT; -+ -+ buf = kmalloc(size, GFP_KERNEL); -+ if (!buf) -+ return -ENOMEM; -+ -+ if (copy_from_user(buf, user, size)) { -+ kfree(buf); -+ return -EFAULT; -+ } -+ -+ /* Strip off protocol encapsulation */ -+ ret = rpi_firmware_property_list(vcio.fw, &buf[2], size - 12); -+ if (ret) { -+ kfree(buf); -+ return ret; -+ } -+ -+ buf[1] = RPI_FIRMWARE_STATUS_SUCCESS; -+ if (copy_to_user(user, buf, size)) -+ ret = -EFAULT; -+ -+ kfree(buf); -+ -+ return ret; -+} -+ -+static int vcio_device_open(struct inode *inode, struct file *file) -+{ -+ try_module_get(THIS_MODULE); -+ -+ return 0; -+} -+ -+static int vcio_device_release(struct inode *inode, struct file *file) -+{ -+ module_put(THIS_MODULE); -+ -+ return 0; -+} -+ -+static long vcio_device_ioctl(struct file *file, unsigned int ioctl_num, -+ unsigned long ioctl_param) -+{ -+ switch (ioctl_num) { -+ case IOCTL_MBOX_PROPERTY: -+ return vcio_user_property_list((void *)ioctl_param); -+ default: -+ pr_err("unknown ioctl: %d\n", ioctl_num); -+ return -EINVAL; -+ } -+} -+ -+const struct file_operations vcio_fops = { -+ .unlocked_ioctl = vcio_device_ioctl, -+ .open = vcio_device_open, -+ .release = vcio_device_release, -+}; -+ -+static int __init vcio_init(void) -+{ -+ struct device_node *np; -+ static struct device *dev; -+ int ret; -+ -+ np = of_find_compatible_node(NULL, NULL, -+ "raspberrypi,bcm2835-firmware"); -+/* Uncomment this when we only boot with Device Tree -+ if (!of_device_is_available(np)) -+ return -ENODEV; -+*/ -+ vcio.fw = rpi_firmware_get(np); -+ if (!vcio.fw) -+ return -ENODEV; -+ -+ ret = alloc_chrdev_region(&vcio.devt, 0, 1, "vcio"); -+ if (ret) { -+ pr_err("failed to allocate device number\n"); -+ return ret; -+ } -+ -+ cdev_init(&vcio.cdev, &vcio_fops); -+ vcio.cdev.owner = THIS_MODULE; -+ ret = cdev_add(&vcio.cdev, vcio.devt, 1); -+ if (ret) { -+ pr_err("failed to register device\n"); -+ goto err_unregister_chardev; -+ } -+ -+ /* -+ * Create sysfs entries -+ * 'bcm2708_vcio' is used for backwards compatibility so we don't break -+ * userspace. Raspian has a udev rule that changes the permissions. -+ */ -+ vcio.class = class_create(THIS_MODULE, "bcm2708_vcio"); -+ if (IS_ERR(vcio.class)) { -+ ret = PTR_ERR(vcio.class); -+ pr_err("failed to create class\n"); -+ goto err_cdev_del; -+ } -+ -+ dev = device_create(vcio.class, NULL, vcio.devt, NULL, "vcio"); -+ if (IS_ERR(dev)) { -+ ret = PTR_ERR(dev); -+ pr_err("failed to create device\n"); -+ goto err_class_destroy; -+ } -+ -+ return 0; -+ -+err_class_destroy: -+ class_destroy(vcio.class); -+err_cdev_del: -+ cdev_del(&vcio.cdev); -+err_unregister_chardev: -+ unregister_chrdev_region(vcio.devt, 1); -+ -+ return ret; -+} -+module_init(vcio_init); -+ -+static void __exit vcio_exit(void) -+{ -+ device_destroy(vcio.class, vcio.devt); -+ class_destroy(vcio.class); -+ cdev_del(&vcio.cdev); -+ unregister_chrdev_region(vcio.devt, 1); -+} -+module_exit(vcio_exit); -+ -+MODULE_AUTHOR("Gray Girling"); -+MODULE_AUTHOR("Noralf Trønnes"); -+MODULE_DESCRIPTION("Mailbox userspace access"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/brcm2708/patches-4.9/0050-firmware-bcm2835-Support-ARCH_BCM270x.patch b/target/linux/brcm2708/patches-4.9/0050-firmware-bcm2835-Support-ARCH_BCM270x.patch deleted file mode 100644 index ecaf614c16bd..000000000000 --- a/target/linux/brcm2708/patches-4.9/0050-firmware-bcm2835-Support-ARCH_BCM270x.patch +++ /dev/null @@ -1,83 +0,0 @@ -From f281fd683848cd432f7b73c869676be6362ce1b8 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= -Date: Fri, 26 Jun 2015 14:25:01 +0200 -Subject: [PATCH] firmware: bcm2835: Support ARCH_BCM270x -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Support booting without Device Tree. -Turn on USB power. -Load driver early because of lacking support for deferred probing -in many drivers. - -Signed-off-by: Noralf Trønnes - -firmware: bcm2835: Don't turn on USB power - -The raspberrypi-power driver is now used to turn on USB power. - -This partly reverts commit: -firmware: bcm2835: Support ARCH_BCM270x - -Signed-off-by: Noralf Trønnes ---- - drivers/firmware/raspberrypi.c | 19 +++++++++++++++++-- - 1 file changed, 17 insertions(+), 2 deletions(-) - ---- a/drivers/firmware/raspberrypi.c -+++ b/drivers/firmware/raspberrypi.c -@@ -28,6 +28,8 @@ struct rpi_firmware { - u32 enabled; - }; - -+static struct platform_device *g_pdev; -+ - static DEFINE_MUTEX(transaction_lock); - - static void response_callback(struct mbox_client *cl, void *msg) -@@ -207,6 +209,7 @@ static int rpi_firmware_probe(struct pla - init_completion(&fw->c); - - platform_set_drvdata(pdev, fw); -+ g_pdev = pdev; - - rpi_firmware_print_firmware_revision(fw); - -@@ -218,6 +221,7 @@ static int rpi_firmware_remove(struct pl - struct rpi_firmware *fw = platform_get_drvdata(pdev); - - mbox_free_channel(fw->chan); -+ g_pdev = NULL; - - return 0; - } -@@ -230,7 +234,7 @@ static int rpi_firmware_remove(struct pl - */ - struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node) - { -- struct platform_device *pdev = of_find_device_by_node(firmware_node); -+ struct platform_device *pdev = g_pdev; - - if (!pdev) - return NULL; -@@ -253,7 +257,18 @@ static struct platform_driver rpi_firmwa - .probe = rpi_firmware_probe, - .remove = rpi_firmware_remove, - }; --module_platform_driver(rpi_firmware_driver); -+ -+static int __init rpi_firmware_init(void) -+{ -+ return platform_driver_register(&rpi_firmware_driver); -+} -+subsys_initcall(rpi_firmware_init); -+ -+static void __init rpi_firmware_exit(void) -+{ -+ platform_driver_unregister(&rpi_firmware_driver); -+} -+module_exit(rpi_firmware_exit); - - MODULE_AUTHOR("Eric Anholt "); - MODULE_DESCRIPTION("Raspberry Pi firmware driver"); diff --git a/target/linux/brcm2708/patches-4.9/0051-bcm2835-add-v4l2-camera-device.patch b/target/linux/brcm2708/patches-4.9/0051-bcm2835-add-v4l2-camera-device.patch deleted file mode 100644 index e6baeabfd307..000000000000 --- a/target/linux/brcm2708/patches-4.9/0051-bcm2835-add-v4l2-camera-device.patch +++ /dev/null @@ -1,7695 +0,0 @@ -From 88f7fe5348a24191969b07537b38449a83369d32 Mon Sep 17 00:00:00 2001 -From: Vincent Sanders -Date: Wed, 30 Jan 2013 12:45:18 +0000 -Subject: [PATCH] bcm2835: add v4l2 camera device - -- Supports raw YUV capture, preview, JPEG and H264. -- Uses videobuf2 for data transfer, using dma_buf. -- Uses 3.6.10 timestamping -- Camera power based on use -- Uses immutable input mode on video encoder - -Signed-off-by: Daniel Stone -Signed-off-by: Luke Diamand - -V4L2: Fixes from 6by9 - -V4L2: Fix EV values. Add manual shutter speed control - -V4L2 EV values should be in units of 1/1000. Corrected. -Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should -give manual shutter control. Requires manual exposure mode -to be selected first. - -Signed-off-by: Dave Stevenson - -V4L2: Correct JPEG Q-factor range - -Should be 1-100, not 0-100 - -Signed-off-by: Dave Stevenson - -V4L2: Fix issue of driver jamming if STREAMON failed. - -Fix issue where the driver was left in a partially enabled -state if STREAMON failed, and would then reject many IOCTLs -as it thought it was streaming. - -Signed-off-by: Dave Stevenson - -V4L2: Fix ISO controls. - -Driver was passing the index to the GPU, and not the desired -ISO value. - -Signed-off-by: Dave Stevenson - -V4L2: Add flicker avoidance controls - -Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker -avoidance frequencies. - -Signed-off-by: Dave Stevenson - -V4L2: Add support for frame rate control. - -Add support for frame rate (or time per frame as V4L2 -inverts it) control via s_parm. - -Signed-off-by: Dave Stevenson - -V4L2: Improve G_FBUF handling so we pass conformance - -Return some sane numbers for get framebuffer so that -we pass conformance. - -Signed-off-by: Dave Stevenson - -V4L2: Fix information advertised through g_vidfmt - -Width and height were being stored based on incorrect -values. - -Signed-off-by: Dave Stevenson - -V4L2: Add support for inline H264 headers - -Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER -to control H264 inline headers. -Requires firmware fix to work correctly, otherwise format -has to be set to H264 before this parameter is set. - -Signed-off-by: Dave Stevenson - -V4L2: Fix JPEG timestamp issue - -JPEG images were coming through from the GPU with timestamp -of 0. Detect this and give current system time instead -of some invalid value. - -Signed-off-by: Dave Stevenson - -V4L2: Fix issue when switching down JPEG resolution. - -JPEG buffer size calculation is based on input resolution. -Input resolution was being configured after output port -format. Caused failures if switching from one JPEG resolution -to a smaller one. - -Signed-off-by: Dave Stevenson - -V4L2: Enable MJPEG encoding - -Requires GPU firmware update to support MJPEG encoder. - -Signed-off-by: Dave Stevenson - -V4L2: Correct flag settings for compressed formats - -Set flags field correctly on enum_fmt_vid_cap for compressed -image formats. - -Signed-off-by: Dave Stevenson - -V4L2: H264 profile & level ctrls, FPS control and auto exp pri - -Several control handling updates. -H264 profile and level controls. -Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to -select whether AE is allowed to override the framerate specified. - -Signed-off-by: Dave Stevenson - -V4L2: Correct BGR24 to RGB24 in format table - -Signed-off-by: Dave Stevenson - -V4L2: Add additional pixel formats. Correct colourspace - -Adds the other flavours of YUYV, and NV12. -Corrects the overlay advertised colourspace. - -Signed-off-by: Dave Stevenson - -V4L2: Drop logging msg from info to debug - -Signed-off-by: Dave Stevenson - -V4L2: Initial pass at scene modes. - -Only supports exposure mode and metering modes. - -Signed-off-by: Dave Stevenson - -V4L2: Add manual white balance control. - -Adds support for V4L2_CID_RED_BALANCE and -V4L2_CID_BLUE_BALANCE. Only has an effect if -V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has -V4L2_WHITE_BALANCE_MANUAL selected. - -Signed-off-by: Dave Stevenson - -config: Enable V4L / MMAL driver - -V4L2: Increase the MMAL timeout to 3sec - -MJPEG codec flush is now taking longer and results -in a kernel panic if the driver has stopped waiting for -the result when it finally completes. -Increase the timeout value from 1 to 3secs. - -Signed-off-by: Dave Stevenson - -V4L2: Add support for setting H264_I_PERIOD - -Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD -to set the frequency with which I frames are produced. - -Signed-off-by: Dave Stevenson - -V4L2: Enable GPU function for removing padding from images. - -GPU can now support arbitrary strides, although may require -additional processing to achieve it. Enable this feature -so that the images delivered are the size requested. - -Signed-off-by: Dave Stevenson - -V4L2: Add support for V4L2_PIX_FMT_BGR32 - -Signed-off-by: Dave Stevenson - -V4L2: Set the colourspace to avoid odd YUV-RGB conversions - -Removes the amiguity from the conversion routines and stops -them dropping back to the SD vs HD choice of coeffs. - -Signed-off-by: Dave Stevenson - -V4L2: Make video/still threshold a run-time param - -Move the define for at what resolution the driver -switches from a video mode capture to a stills mode -capture to module parameters. - -Signed-off-by: Dave Stevenson - -V4L2: Fix incorrect pool sizing - -Signed-off-by: Dave Stevenson - -V4L2: Add option to disable enum_framesizes. - -Gstreamer's handling of a driver that advertises -V4L2_FRMSIZE_TYPE_STEPWISE to define the supported -resolutions is broken. See bug -https://bugzilla.gnome.org/show_bug.cgi?id=726521 - -Optional parameter of gst_v4l2src_is_broken added. -If non-zero, the driver claims not to support that -ioctl, and gstreamer should be happy again (it -guesses a set of defaults for itself). - -Signed-off-by: Dave Stevenson - -V4L2: Add support for more image formats - -Adds YVU420 (YV12), YVU420SP (NV21), and BGR888. - -Signed-off-by: Dave Stevenson - -V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD - -Request to extend the range from the fairly arbitrary -1000 frames (33 seconds at 30fps). Extend out to the -max range supported (int32 value). -Also allow 0, which is handled by the codec as only -send an I-frame on the first frame and never again. -There may be an exception if it detects a significant -scene change, but there's no easy way around that. - -Signed-off-by: Dave Stevenson - -bcm2835-camera: stop_streaming now has a void return - -BCM2835-V4L2: Fix compliance test failures - -VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due -to reporting V4L2_COLORSPACE_JPEG when the colour -format wasn't V4L2_PIX_FMT_JPEG. -Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats. - -bcm2835 camera planar/packed stride length - -Added a field to the mmal_fmt struct used to compute the bytes per line -when using a particular format. This results in the correct stride being -calculated even when the format is planar. - -Signed-off-by: Garrett Wilson - -bcm2835: camera: check for scene not being found - -static analysis by cppcheck detected some potential NULL pointer -dereference issues: - -[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null - pointer dereference: scene - (and lines 858, 859 too) - -it is possible that scene is not found because of an invalue ctrl->val -and is therefore NULL and hence causing a null pointer dereference. - -Signed-off-by: Colin Ian King - -bcm2835: memcpy port data to m rather than rmsg - -static analysis by cppcheck detected a memcpy to rmsg which is -not actually initialized at that point. The memcpy should be copying -to variable m instead. - -Signed-off-by: Colin Ian King - -BCM2835-V4L2: Return buffers to videobuf2 on shutdown - -https://github.com/raspberrypi/linux/issues/817 -Fixes the kernel warning from videobuf2 as buffers -are now returned as they are being flushed on -stop_streaming. - -squash: Fixup bcm2835-camera for changes in kernel 4.4 api - -v4l2: Fix up driver to upstream timestamp changes - -bcm2835-camera: fix a bug in computation of frame timestamp - -Fixes #1318 - -V4L2 driver updates (#1393) - -* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO - -https://github.com/raspberrypi/linux/issues/1251 - -V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should. -V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking -V4L2_CID_ISO_SENSITIVITY as 0 for auto mode. -Still accepts 0 for auto, but also abides by the new parameter. - -Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> - -* BCM2835-V4L2: Add a video_nr parameter. - -Adds a kernel parameter "video_nr" to specify the preferred -/dev/videoX device node. -https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545 - -Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> - -* BCM2835-V4L2: Add support for multiple cameras - -Ask GPU on load how many cameras have been detected, and -enumerate that number of devices. -Only applicable on the Compute Module as no other device -exposes multiple CSI2 interfaces. - -Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> - -* BCM2835-V4L2: Add control of the overlay location and alpha. - -Actually do something useful in vidioc_s_fmt_vid_overlay and -vidioc_try_fmt_vid_overlay, rather than effectively having -read-only fields. - -Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> - -* BCM2835-V4L2: V4L2-Compliance failure fix - -VIDIOC_TRY_FMT was failing due to bytesperline not -being set correctly by default. - -Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> - -* BCM2835-V4L2: Make all module parameters static - -Clean up to correct variable scope - -Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> - -V4L2: Request maximum resolution from GPU - -Get resolution information about the sensors from the GPU -and advertise it correctly. - -Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> - -BCM2835-V4L2: Increase minimum resolution to 32x32 - -https://github.com/raspberrypi/linux/issues/1498 showed -up that 16x16 is failing to work on the GPU for some reason. - -GPU bug being tracked on -https://github.com/raspberrypi/firmware/issues/607 -Workaround here by increasing minimum resolution via V4L2 -to 32x32. - -Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> - -[media]: bcm2835-camera: fix compilation error - -There is an error when compiling rpi-4.6.y branch: - CC [M] drivers/media/platform/bcm2835/bcm2835-camera.o -drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] - .queue_setup = queue_setup, - ^ -drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup') - -The const void *parg in setup_queue callback is not needed since commit: -df9ecb0cad14b952a2865f8b3af86b2bbadfab45. -This commit removes it. - -Signed-off-by: Slawomir Stepien - -bcm2835-camera: Fix max/min error when looping over cameras/resolutions - -See: https://github.com/raspberrypi/linux/issues/1447#issuecomment-221303506 - -BCM2835-V4L2: Correct handling for BGR24 vs RGB24. - -There was a bug in the GPU firmware that had reversed these -two formats. -Detect the old firmware, and reverse the formats if necessary. - -Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> - -BCM2835-v4l2: Fix a conformance test failure - -Format ioctls: - test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK - warn: v4l2-test-formats.cpp(1195): S_PARM is supported but - doesn't report V4L2_CAP_TIMEPERFRAME. - fail: v4l2-test-formats.cpp(1118): node->has_frmintervals - && !cap->capability ---- - Documentation/video4linux/bcm2835-v4l2.txt | 60 + - drivers/media/platform/Kconfig | 2 + - drivers/media/platform/Makefile | 2 + - drivers/media/platform/bcm2835/Kconfig | 25 + - drivers/media/platform/bcm2835/Makefile | 5 + - drivers/media/platform/bcm2835/bcm2835-camera.c | 2016 ++++++++++++++++++++++ - drivers/media/platform/bcm2835/bcm2835-camera.h | 145 ++ - drivers/media/platform/bcm2835/controls.c | 1345 +++++++++++++++ - drivers/media/platform/bcm2835/mmal-common.h | 53 + - drivers/media/platform/bcm2835/mmal-encodings.h | 127 ++ - drivers/media/platform/bcm2835/mmal-msg-common.h | 50 + - drivers/media/platform/bcm2835/mmal-msg-format.h | 81 + - drivers/media/platform/bcm2835/mmal-msg-port.h | 107 ++ - drivers/media/platform/bcm2835/mmal-msg.h | 404 +++++ - drivers/media/platform/bcm2835/mmal-parameters.h | 689 ++++++++ - drivers/media/platform/bcm2835/mmal-vchiq.c | 1916 ++++++++++++++++++++ - drivers/media/platform/bcm2835/mmal-vchiq.h | 178 ++ - 17 files changed, 7205 insertions(+) - create mode 100644 Documentation/video4linux/bcm2835-v4l2.txt - create mode 100644 drivers/media/platform/bcm2835/Kconfig - create mode 100644 drivers/media/platform/bcm2835/Makefile - create mode 100644 drivers/media/platform/bcm2835/bcm2835-camera.c - create mode 100644 drivers/media/platform/bcm2835/bcm2835-camera.h - create mode 100644 drivers/media/platform/bcm2835/controls.c - create mode 100644 drivers/media/platform/bcm2835/mmal-common.h - create mode 100644 drivers/media/platform/bcm2835/mmal-encodings.h - create mode 100644 drivers/media/platform/bcm2835/mmal-msg-common.h - create mode 100644 drivers/media/platform/bcm2835/mmal-msg-format.h - create mode 100644 drivers/media/platform/bcm2835/mmal-msg-port.h - create mode 100644 drivers/media/platform/bcm2835/mmal-msg.h - create mode 100644 drivers/media/platform/bcm2835/mmal-parameters.h - create mode 100644 drivers/media/platform/bcm2835/mmal-vchiq.c - create mode 100644 drivers/media/platform/bcm2835/mmal-vchiq.h - ---- /dev/null -+++ b/Documentation/video4linux/bcm2835-v4l2.txt -@@ -0,0 +1,60 @@ -+ -+BCM2835 (aka Raspberry Pi) V4L2 driver -+====================================== -+ -+1. Copyright -+============ -+ -+Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ -+2. License -+========== -+ -+This program is free software; you can redistribute it and/or modify -+it under the terms of the GNU General Public License as published by -+the Free Software Foundation; either version 2 of the License, or -+(at your option) any later version. -+ -+This program is distributed in the hope that it will be useful, -+but WITHOUT ANY WARRANTY; without even the implied warranty of -+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+GNU General Public License for more details. -+ -+You should have received a copy of the GNU General Public License -+along with this program; if not, write to the Free Software -+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ -+3. Quick Start -+============== -+ -+You need a version 1.0 or later of v4l2-ctl, available from: -+ git://git.linuxtv.org/v4l-utils.git -+ -+$ sudo modprobe bcm2835-v4l2 -+ -+Turn on the overlay: -+ -+$ v4l2-ctl --overlay=1 -+ -+Turn off the overlay: -+ -+$ v4l2-ctl --overlay=0 -+ -+Set the capture format for video: -+ -+$ v4l2-ctl --set-fmt-video=width=1920,height=1088,pixelformat=4 -+ -+(Note: 1088 not 1080). -+ -+Capture: -+ -+$ v4l2-ctl --stream-mmap=3 --stream-count=100 --stream-to=somefile.h264 -+ -+Stills capture: -+ -+$ v4l2-ctl --set-fmt-video=width=2592,height=1944,pixelformat=3 -+$ v4l2-ctl --stream-mmap=3 --stream-count=1 --stream-to=somefile.jpg -+ -+List of available formats: -+ -+$ v4l2-ctl --list-formats ---- a/drivers/media/platform/Kconfig -+++ b/drivers/media/platform/Kconfig -@@ -11,6 +11,8 @@ menuconfig V4L_PLATFORM_DRIVERS - - if V4L_PLATFORM_DRIVERS - -+source "drivers/media/platform/bcm2835/Kconfig" -+ - source "drivers/media/platform/marvell-ccic/Kconfig" - - config VIDEO_VIA_CAMERA ---- a/drivers/media/platform/Makefile -+++ b/drivers/media/platform/Makefile -@@ -2,6 +2,8 @@ - # Makefile for the video capture/playback device drivers. - # - -+obj-$(CONFIG_VIDEO_BCM2835) += bcm2835/ -+ - obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o - - obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o ---- /dev/null -+++ b/drivers/media/platform/bcm2835/Kconfig -@@ -0,0 +1,25 @@ -+# Broadcom VideoCore IV v4l2 camera support -+ -+config VIDEO_BCM2835 -+ bool "Broadcom BCM2835 camera interface driver" -+ depends on VIDEO_V4L2 && ARCH_BCM2835 -+ ---help--- -+ Say Y here to enable camera host interface devices for -+ Broadcom BCM2835 SoC. This operates over the VCHIQ interface -+ to a service running on VideoCore. -+ -+ -+if VIDEO_BCM2835 -+ -+config VIDEO_BCM2835_MMAL -+ tristate "Broadcom BM2835 MMAL camera interface driver" -+ depends on BCM2708_VCHIQ -+ select VIDEOBUF2_VMALLOC -+ ---help--- -+ This is a V4L2 driver for the Broadcom BCM2835 MMAL camera host interface -+ -+ To compile this driver as a module, choose M here: the -+ module will be called bcm2835-v4l2.o -+ -+ -+endif # VIDEO_BM2835 ---- /dev/null -+++ b/drivers/media/platform/bcm2835/Makefile -@@ -0,0 +1,5 @@ -+bcm2835-v4l2-objs := bcm2835-camera.o controls.o mmal-vchiq.o -+ -+obj-$(CONFIG_VIDEO_BCM2835_MMAL) += bcm2835-v4l2.o -+ -+ccflags-$(CONFIG_VIDEO_BCM2835) += -Idrivers/staging/vc04_services -Idrivers/staging/vc04_services/interface/vcos/linuxkernel -D__VCCOREVER__=0x04000000 ---- /dev/null -+++ b/drivers/media/platform/bcm2835/bcm2835-camera.c -@@ -0,0 +1,2016 @@ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive -+ * for more details. -+ * -+ * Authors: Vincent Sanders -+ * Dave Stevenson -+ * Simon Mellor -+ * Luke Diamand -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "mmal-common.h" -+#include "mmal-encodings.h" -+#include "mmal-vchiq.h" -+#include "mmal-msg.h" -+#include "mmal-parameters.h" -+#include "bcm2835-camera.h" -+ -+#define BM2835_MMAL_VERSION "0.0.2" -+#define BM2835_MMAL_MODULE_NAME "bcm2835-v4l2" -+#define MIN_WIDTH 32 -+#define MIN_HEIGHT 32 -+#define MIN_BUFFER_SIZE (80*1024) -+ -+#define MAX_VIDEO_MODE_WIDTH 1280 -+#define MAX_VIDEO_MODE_HEIGHT 720 -+ -+#define MAX_BCM2835_CAMERAS 2 -+ -+MODULE_DESCRIPTION("Broadcom 2835 MMAL video capture"); -+MODULE_AUTHOR("Vincent Sanders"); -+MODULE_LICENSE("GPL"); -+MODULE_VERSION(BM2835_MMAL_VERSION); -+ -+int bcm2835_v4l2_debug; -+module_param_named(debug, bcm2835_v4l2_debug, int, 0644); -+MODULE_PARM_DESC(bcm2835_v4l2_debug, "Debug level 0-2"); -+ -+#define UNSET (-1) -+static int video_nr[] = {[0 ... (MAX_BCM2835_CAMERAS - 1)] = UNSET }; -+module_param_array(video_nr, int, NULL, 0644); -+MODULE_PARM_DESC(video_nr, "videoX start numbers, -1 is autodetect"); -+ -+static int max_video_width = MAX_VIDEO_MODE_WIDTH; -+static int max_video_height = MAX_VIDEO_MODE_HEIGHT; -+module_param(max_video_width, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH); -+MODULE_PARM_DESC(max_video_width, "Threshold for video mode"); -+module_param(max_video_height, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH); -+MODULE_PARM_DESC(max_video_height, "Threshold for video mode"); -+ -+/* Gstreamer bug https://bugzilla.gnome.org/show_bug.cgi?id=726521 -+ * v4l2src does bad (and actually wrong) things when the vidioc_enum_framesizes -+ * function says type V4L2_FRMSIZE_TYPE_STEPWISE, which we do by default. -+ * It's happier if we just don't say anything at all, when it then -+ * sets up a load of defaults that it thinks might work. -+ * If gst_v4l2src_is_broken is non-zero, then we remove the function from -+ * our function table list (actually switch to an alternate set, but same -+ * result). -+ */ -+static int gst_v4l2src_is_broken; -+module_param(gst_v4l2src_is_broken, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH); -+MODULE_PARM_DESC(gst_v4l2src_is_broken, "If non-zero, enable workaround for Gstreamer"); -+ -+/* global device data array */ -+static struct bm2835_mmal_dev *gdev[MAX_BCM2835_CAMERAS]; -+ -+#define FPS_MIN 1 -+#define FPS_MAX 90 -+ -+/* timeperframe: min/max and default */ -+static const struct v4l2_fract -+ tpf_min = {.numerator = 1, .denominator = FPS_MAX}, -+ tpf_max = {.numerator = 1, .denominator = FPS_MIN}, -+ tpf_default = {.numerator = 1000, .denominator = 30000}; -+ -+/* video formats */ -+static struct mmal_fmt formats[] = { -+ { -+ .name = "4:2:0, planar, YUV", -+ .fourcc = V4L2_PIX_FMT_YUV420, -+ .flags = 0, -+ .mmal = MMAL_ENCODING_I420, -+ .depth = 12, -+ .mmal_component = MMAL_COMPONENT_CAMERA, -+ .ybbp = 1, -+ }, -+ { -+ .name = "4:2:2, packed, YUYV", -+ .fourcc = V4L2_PIX_FMT_YUYV, -+ .flags = 0, -+ .mmal = MMAL_ENCODING_YUYV, -+ .depth = 16, -+ .mmal_component = MMAL_COMPONENT_CAMERA, -+ .ybbp = 2, -+ }, -+ { -+ .name = "RGB24 (LE)", -+ .fourcc = V4L2_PIX_FMT_RGB24, -+ .flags = 0, -+ .mmal = MMAL_ENCODING_RGB24, -+ .depth = 24, -+ .mmal_component = MMAL_COMPONENT_CAMERA, -+ .ybbp = 3, -+ }, -+ { -+ .name = "JPEG", -+ .fourcc = V4L2_PIX_FMT_JPEG, -+ .flags = V4L2_FMT_FLAG_COMPRESSED, -+ .mmal = MMAL_ENCODING_JPEG, -+ .depth = 8, -+ .mmal_component = MMAL_COMPONENT_IMAGE_ENCODE, -+ .ybbp = 0, -+ }, -+ { -+ .name = "H264", -+ .fourcc = V4L2_PIX_FMT_H264, -+ .flags = V4L2_FMT_FLAG_COMPRESSED, -+ .mmal = MMAL_ENCODING_H264, -+ .depth = 8, -+ .mmal_component = MMAL_COMPONENT_VIDEO_ENCODE, -+ .ybbp = 0, -+ }, -+ { -+ .name = "MJPEG", -+ .fourcc = V4L2_PIX_FMT_MJPEG, -+ .flags = V4L2_FMT_FLAG_COMPRESSED, -+ .mmal = MMAL_ENCODING_MJPEG, -+ .depth = 8, -+ .mmal_component = MMAL_COMPONENT_VIDEO_ENCODE, -+ .ybbp = 0, -+ }, -+ { -+ .name = "4:2:2, packed, YVYU", -+ .fourcc = V4L2_PIX_FMT_YVYU, -+ .flags = 0, -+ .mmal = MMAL_ENCODING_YVYU, -+ .depth = 16, -+ .mmal_component = MMAL_COMPONENT_CAMERA, -+ .ybbp = 2, -+ }, -+ { -+ .name = "4:2:2, packed, VYUY", -+ .fourcc = V4L2_PIX_FMT_VYUY, -+ .flags = 0, -+ .mmal = MMAL_ENCODING_VYUY, -+ .depth = 16, -+ .mmal_component = MMAL_COMPONENT_CAMERA, -+ .ybbp = 2, -+ }, -+ { -+ .name = "4:2:2, packed, UYVY", -+ .fourcc = V4L2_PIX_FMT_UYVY, -+ .flags = 0, -+ .mmal = MMAL_ENCODING_UYVY, -+ .depth = 16, -+ .mmal_component = MMAL_COMPONENT_CAMERA, -+ .ybbp = 2, -+ }, -+ { -+ .name = "4:2:0, planar, NV12", -+ .fourcc = V4L2_PIX_FMT_NV12, -+ .flags = 0, -+ .mmal = MMAL_ENCODING_NV12, -+ .depth = 12, -+ .mmal_component = MMAL_COMPONENT_CAMERA, -+ .ybbp = 1, -+ }, -+ { -+ .name = "RGB24 (BE)", -+ .fourcc = V4L2_PIX_FMT_BGR24, -+ .flags = 0, -+ .mmal = MMAL_ENCODING_BGR24, -+ .depth = 24, -+ .mmal_component = MMAL_COMPONENT_CAMERA, -+ .ybbp = 3, -+ }, -+ { -+ .name = "4:2:0, planar, YVU", -+ .fourcc = V4L2_PIX_FMT_YVU420, -+ .flags = 0, -+ .mmal = MMAL_ENCODING_YV12, -+ .depth = 12, -+ .mmal_component = MMAL_COMPONENT_CAMERA, -+ .ybbp = 1, -+ }, -+ { -+ .name = "4:2:0, planar, NV21", -+ .fourcc = V4L2_PIX_FMT_NV21, -+ .flags = 0, -+ .mmal = MMAL_ENCODING_NV21, -+ .depth = 12, -+ .mmal_component = MMAL_COMPONENT_CAMERA, -+ .ybbp = 1, -+ }, -+ { -+ .name = "RGB32 (BE)", -+ .fourcc = V4L2_PIX_FMT_BGR32, -+ .flags = 0, -+ .mmal = MMAL_ENCODING_BGRA, -+ .depth = 32, -+ .mmal_component = MMAL_COMPONENT_CAMERA, -+ .ybbp = 4, -+ }, -+}; -+ -+static struct mmal_fmt *get_format(struct v4l2_format *f) -+{ -+ struct mmal_fmt *fmt; -+ unsigned int k; -+ -+ for (k = 0; k < ARRAY_SIZE(formats); k++) { -+ fmt = &formats[k]; -+ if (fmt->fourcc == f->fmt.pix.pixelformat) -+ break; -+ } -+ -+ if (k == ARRAY_SIZE(formats)) -+ return NULL; -+ -+ return &formats[k]; -+} -+ -+/* ------------------------------------------------------------------ -+ Videobuf queue operations -+ ------------------------------------------------------------------*/ -+ -+static int queue_setup(struct vb2_queue *vq, -+ unsigned int *nbuffers, unsigned int *nplanes, -+ unsigned int sizes[], struct device *alloc_ctxs[]) -+{ -+ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq); -+ unsigned long size; -+ -+ /* refuse queue setup if port is not configured */ -+ if (dev->capture.port == NULL) { -+ v4l2_err(&dev->v4l2_dev, -+ "%s: capture port not configured\n", __func__); -+ return -EINVAL; -+ } -+ -+ size = dev->capture.port->current_buffer.size; -+ if (size == 0) { -+ v4l2_err(&dev->v4l2_dev, -+ "%s: capture port buffer size is zero\n", __func__); -+ return -EINVAL; -+ } -+ -+ if (*nbuffers < (dev->capture.port->current_buffer.num + 2)) -+ *nbuffers = (dev->capture.port->current_buffer.num + 2); -+ -+ *nplanes = 1; -+ -+ sizes[0] = size; -+ -+ /* -+ * videobuf2-vmalloc allocator is context-less so no need to set -+ * alloc_ctxs array. -+ */ -+ -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p\n", -+ __func__, dev); -+ -+ return 0; -+} -+ -+static int buffer_prepare(struct vb2_buffer *vb) -+{ -+ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vb->vb2_queue); -+ unsigned long size; -+ -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p\n", -+ __func__, dev); -+ -+ BUG_ON(dev->capture.port == NULL); -+ BUG_ON(dev->capture.fmt == NULL); -+ -+ size = dev->capture.stride * dev->capture.height; -+ if (vb2_plane_size(vb, 0) < size) { -+ v4l2_err(&dev->v4l2_dev, -+ "%s data will not fit into plane (%lu < %lu)\n", -+ __func__, vb2_plane_size(vb, 0), size); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static inline bool is_capturing(struct bm2835_mmal_dev *dev) -+{ -+ return dev->capture.camera_port == -+ &dev-> -+ component[MMAL_COMPONENT_CAMERA]->output[MMAL_CAMERA_PORT_CAPTURE]; -+} -+ -+static void buffer_cb(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ int status, -+ struct mmal_buffer *buf, -+ unsigned long length, u32 mmal_flags, s64 dts, s64 pts) -+{ -+ struct bm2835_mmal_dev *dev = port->cb_ctx; -+ -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "%s: status:%d, buf:%p, length:%lu, flags %u, pts %lld\n", -+ __func__, status, buf, length, mmal_flags, pts); -+ -+ if (status != 0) { -+ /* error in transfer */ -+ if (buf != NULL) { -+ /* there was a buffer with the error so return it */ -+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); -+ } -+ return; -+ } else if (length == 0) { -+ /* stream ended */ -+ if (buf != NULL) { -+ /* this should only ever happen if the port is -+ * disabled and there are buffers still queued -+ */ -+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); -+ pr_debug("Empty buffer"); -+ } else if (dev->capture.frame_count) { -+ /* grab another frame */ -+ if (is_capturing(dev)) { -+ pr_debug("Grab another frame"); -+ vchiq_mmal_port_parameter_set( -+ instance, -+ dev->capture. -+ camera_port, -+ MMAL_PARAMETER_CAPTURE, -+ &dev->capture. -+ frame_count, -+ sizeof(dev->capture.frame_count)); -+ } -+ } else { -+ /* signal frame completion */ -+ complete(&dev->capture.frame_cmplt); -+ } -+ } else { -+ if (dev->capture.frame_count) { -+ if (dev->capture.vc_start_timestamp != -1 && -+ pts != 0) { -+ struct timeval timestamp; -+ s64 runtime_us = pts - -+ dev->capture.vc_start_timestamp; -+ u32 div = 0; -+ u32 rem = 0; -+ -+ div = -+ div_u64_rem(runtime_us, USEC_PER_SEC, &rem); -+ timestamp.tv_sec = -+ dev->capture.kernel_start_ts.tv_sec + div; -+ timestamp.tv_usec = -+ dev->capture.kernel_start_ts.tv_usec + rem; -+ -+ if (timestamp.tv_usec >= -+ USEC_PER_SEC) { -+ timestamp.tv_sec++; -+ timestamp.tv_usec -= -+ USEC_PER_SEC; -+ } -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Convert start time %d.%06d and %llu " -+ "with offset %llu to %d.%06d\n", -+ (int)dev->capture.kernel_start_ts. -+ tv_sec, -+ (int)dev->capture.kernel_start_ts. -+ tv_usec, -+ dev->capture.vc_start_timestamp, pts, -+ (int)timestamp.tv_sec, -+ (int)timestamp.tv_usec); -+ buf->vb.vb2_buf.timestamp = timestamp.tv_sec * 1000000000ULL + -+ timestamp.tv_usec * 1000ULL; -+ } else { -+ buf->vb.vb2_buf.timestamp = ktime_get_ns(); -+ } -+ -+ vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); -+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); -+ -+ if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && -+ is_capturing(dev)) { -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Grab another frame as buffer has EOS"); -+ vchiq_mmal_port_parameter_set( -+ instance, -+ dev->capture. -+ camera_port, -+ MMAL_PARAMETER_CAPTURE, -+ &dev->capture. -+ frame_count, -+ sizeof(dev->capture.frame_count)); -+ } -+ } else { -+ /* signal frame completion */ -+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); -+ complete(&dev->capture.frame_cmplt); -+ } -+ } -+} -+ -+static int enable_camera(struct bm2835_mmal_dev *dev) -+{ -+ int ret; -+ if (!dev->camera_use_count) { -+ ret = vchiq_mmal_port_parameter_set( -+ dev->instance, -+ &dev->component[MMAL_COMPONENT_CAMERA]->control, -+ MMAL_PARAMETER_CAMERA_NUM, &dev->camera_num, -+ sizeof(dev->camera_num)); -+ if (ret < 0) { -+ v4l2_err(&dev->v4l2_dev, -+ "Failed setting camera num, ret %d\n", ret); -+ return -EINVAL; -+ } -+ -+ ret = vchiq_mmal_component_enable( -+ dev->instance, -+ dev->component[MMAL_COMPONENT_CAMERA]); -+ if (ret < 0) { -+ v4l2_err(&dev->v4l2_dev, -+ "Failed enabling camera, ret %d\n", ret); -+ return -EINVAL; -+ } -+ } -+ dev->camera_use_count++; -+ v4l2_dbg(1, bcm2835_v4l2_debug, -+ &dev->v4l2_dev, "enabled camera (refcount %d)\n", -+ dev->camera_use_count); -+ return 0; -+} -+ -+static int disable_camera(struct bm2835_mmal_dev *dev) -+{ -+ int ret; -+ if (!dev->camera_use_count) { -+ v4l2_err(&dev->v4l2_dev, -+ "Disabled the camera when already disabled\n"); -+ return -EINVAL; -+ } -+ dev->camera_use_count--; -+ if (!dev->camera_use_count) { -+ unsigned int i = 0xFFFFFFFF; -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Disabling camera\n"); -+ ret = -+ vchiq_mmal_component_disable( -+ dev->instance, -+ dev->component[MMAL_COMPONENT_CAMERA]); -+ if (ret < 0) { -+ v4l2_err(&dev->v4l2_dev, -+ "Failed disabling camera, ret %d\n", ret); -+ return -EINVAL; -+ } -+ vchiq_mmal_port_parameter_set( -+ dev->instance, -+ &dev->component[MMAL_COMPONENT_CAMERA]->control, -+ MMAL_PARAMETER_CAMERA_NUM, &i, -+ sizeof(i)); -+ } -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Camera refcount now %d\n", dev->camera_use_count); -+ return 0; -+} -+ -+static void buffer_queue(struct vb2_buffer *vb) -+{ -+ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vb->vb2_queue); -+ struct vb2_v4l2_buffer *vb2 = to_vb2_v4l2_buffer(vb); -+ struct mmal_buffer *buf = container_of(vb2, struct mmal_buffer, vb); -+ int ret; -+ -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "%s: dev:%p buf:%p\n", __func__, dev, buf); -+ -+ buf->buffer = vb2_plane_vaddr(&buf->vb.vb2_buf, 0); -+ buf->buffer_size = vb2_plane_size(&buf->vb.vb2_buf, 0); -+ -+ ret = vchiq_mmal_submit_buffer(dev->instance, dev->capture.port, buf); -+ if (ret < 0) -+ v4l2_err(&dev->v4l2_dev, "%s: error submitting buffer\n", -+ __func__); -+} -+ -+static int start_streaming(struct vb2_queue *vq, unsigned int count) -+{ -+ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq); -+ int ret; -+ int parameter_size; -+ -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p\n", -+ __func__, dev); -+ -+ /* ensure a format has actually been set */ -+ if (dev->capture.port == NULL) -+ return -EINVAL; -+ -+ if (enable_camera(dev) < 0) { -+ v4l2_err(&dev->v4l2_dev, "Failed to enable camera\n"); -+ return -EINVAL; -+ } -+ -+ /*init_completion(&dev->capture.frame_cmplt); */ -+ -+ /* enable frame capture */ -+ dev->capture.frame_count = 1; -+ -+ /* if the preview is not already running, wait for a few frames for AGC -+ * to settle down. -+ */ -+ if (!dev->component[MMAL_COMPONENT_PREVIEW]->enabled) -+ msleep(300); -+ -+ /* enable the connection from camera to encoder (if applicable) */ -+ if (dev->capture.camera_port != dev->capture.port -+ && dev->capture.camera_port) { -+ ret = vchiq_mmal_port_enable(dev->instance, -+ dev->capture.camera_port, NULL); -+ if (ret) { -+ v4l2_err(&dev->v4l2_dev, -+ "Failed to enable encode tunnel - error %d\n", -+ ret); -+ return -1; -+ } -+ } -+ -+ /* Get VC timestamp at this point in time */ -+ parameter_size = sizeof(dev->capture.vc_start_timestamp); -+ if (vchiq_mmal_port_parameter_get(dev->instance, -+ dev->capture.camera_port, -+ MMAL_PARAMETER_SYSTEM_TIME, -+ &dev->capture.vc_start_timestamp, -+ ¶meter_size)) { -+ v4l2_err(&dev->v4l2_dev, -+ "Failed to get VC start time - update your VC f/w\n"); -+ -+ /* Flag to indicate just to rely on kernel timestamps */ -+ dev->capture.vc_start_timestamp = -1; -+ } else -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Start time %lld size %d\n", -+ dev->capture.vc_start_timestamp, parameter_size); -+ -+ v4l2_get_timestamp(&dev->capture.kernel_start_ts); -+ -+ /* enable the camera port */ -+ dev->capture.port->cb_ctx = dev; -+ ret = -+ vchiq_mmal_port_enable(dev->instance, dev->capture.port, buffer_cb); -+ if (ret) { -+ v4l2_err(&dev->v4l2_dev, -+ "Failed to enable capture port - error %d. " -+ "Disabling camera port again\n", ret); -+ -+ vchiq_mmal_port_disable(dev->instance, -+ dev->capture.camera_port); -+ if (disable_camera(dev) < 0) { -+ v4l2_err(&dev->v4l2_dev, "Failed to disable camera\n"); -+ return -EINVAL; -+ } -+ return -1; -+ } -+ -+ /* capture the first frame */ -+ vchiq_mmal_port_parameter_set(dev->instance, -+ dev->capture.camera_port, -+ MMAL_PARAMETER_CAPTURE, -+ &dev->capture.frame_count, -+ sizeof(dev->capture.frame_count)); -+ return 0; -+} -+ -+/* abort streaming and wait for last buffer */ -+static void stop_streaming(struct vb2_queue *vq) -+{ -+ int ret; -+ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq); -+ -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p\n", -+ __func__, dev); -+ -+ init_completion(&dev->capture.frame_cmplt); -+ dev->capture.frame_count = 0; -+ -+ /* ensure a format has actually been set */ -+ if (dev->capture.port == NULL) { -+ v4l2_err(&dev->v4l2_dev, -+ "no capture port - stream not started?\n"); -+ return; -+ } -+ -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "stopping capturing\n"); -+ -+ /* stop capturing frames */ -+ vchiq_mmal_port_parameter_set(dev->instance, -+ dev->capture.camera_port, -+ MMAL_PARAMETER_CAPTURE, -+ &dev->capture.frame_count, -+ sizeof(dev->capture.frame_count)); -+ -+ /* wait for last frame to complete */ -+ ret = wait_for_completion_timeout(&dev->capture.frame_cmplt, HZ); -+ if (ret <= 0) -+ v4l2_err(&dev->v4l2_dev, -+ "error %d waiting for frame completion\n", ret); -+ -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "disabling connection\n"); -+ -+ /* disable the connection from camera to encoder */ -+ ret = vchiq_mmal_port_disable(dev->instance, dev->capture.camera_port); -+ if (!ret && dev->capture.camera_port != dev->capture.port) { -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "disabling port\n"); -+ ret = vchiq_mmal_port_disable(dev->instance, dev->capture.port); -+ } else if (dev->capture.camera_port != dev->capture.port) { -+ v4l2_err(&dev->v4l2_dev, "port_disable failed, error %d\n", -+ ret); -+ } -+ -+ if (disable_camera(dev) < 0) -+ v4l2_err(&dev->v4l2_dev, "Failed to disable camera\n"); -+} -+ -+static void bm2835_mmal_lock(struct vb2_queue *vq) -+{ -+ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq); -+ mutex_lock(&dev->mutex); -+} -+ -+static void bm2835_mmal_unlock(struct vb2_queue *vq) -+{ -+ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq); -+ mutex_unlock(&dev->mutex); -+} -+ -+static struct vb2_ops bm2835_mmal_video_qops = { -+ .queue_setup = queue_setup, -+ .buf_prepare = buffer_prepare, -+ .buf_queue = buffer_queue, -+ .start_streaming = start_streaming, -+ .stop_streaming = stop_streaming, -+ .wait_prepare = bm2835_mmal_unlock, -+ .wait_finish = bm2835_mmal_lock, -+}; -+ -+/* ------------------------------------------------------------------ -+ IOCTL operations -+ ------------------------------------------------------------------*/ -+ -+static int set_overlay_params(struct bm2835_mmal_dev *dev, -+ struct vchiq_mmal_port *port) -+{ -+ int ret; -+ struct mmal_parameter_displayregion prev_config = { -+ .set = MMAL_DISPLAY_SET_LAYER | MMAL_DISPLAY_SET_ALPHA | -+ MMAL_DISPLAY_SET_DEST_RECT | MMAL_DISPLAY_SET_FULLSCREEN, -+ .layer = PREVIEW_LAYER, -+ .alpha = dev->overlay.global_alpha, -+ .fullscreen = 0, -+ .dest_rect = { -+ .x = dev->overlay.w.left, -+ .y = dev->overlay.w.top, -+ .width = dev->overlay.w.width, -+ .height = dev->overlay.w.height, -+ }, -+ }; -+ ret = vchiq_mmal_port_parameter_set(dev->instance, port, -+ MMAL_PARAMETER_DISPLAYREGION, -+ &prev_config, sizeof(prev_config)); -+ -+ return ret; -+} -+ -+/* overlay ioctl */ -+static int vidioc_enum_fmt_vid_overlay(struct file *file, void *priv, -+ struct v4l2_fmtdesc *f) -+{ -+ struct mmal_fmt *fmt; -+ -+ if (f->index >= ARRAY_SIZE(formats)) -+ return -EINVAL; -+ -+ fmt = &formats[f->index]; -+ -+ strlcpy(f->description, fmt->name, sizeof(f->description)); -+ f->pixelformat = fmt->fourcc; -+ f->flags = fmt->flags; -+ -+ return 0; -+} -+ -+static int vidioc_g_fmt_vid_overlay(struct file *file, void *priv, -+ struct v4l2_format *f) -+{ -+ struct bm2835_mmal_dev *dev = video_drvdata(file); -+ -+ f->fmt.win = dev->overlay; -+ -+ return 0; -+} -+ -+static int vidioc_try_fmt_vid_overlay(struct file *file, void *priv, -+ struct v4l2_format *f) -+{ -+ struct bm2835_mmal_dev *dev = video_drvdata(file); -+ -+ f->fmt.win.field = V4L2_FIELD_NONE; -+ f->fmt.win.chromakey = 0; -+ f->fmt.win.clips = NULL; -+ f->fmt.win.clipcount = 0; -+ f->fmt.win.bitmap = NULL; -+ -+ v4l_bound_align_image(&f->fmt.win.w.width, MIN_WIDTH, dev->max_width, 1, -+ &f->fmt.win.w.height, MIN_HEIGHT, dev->max_height, -+ 1, 0); -+ v4l_bound_align_image(&f->fmt.win.w.left, MIN_WIDTH, dev->max_width, 1, -+ &f->fmt.win.w.top, MIN_HEIGHT, dev->max_height, -+ 1, 0); -+ -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Overlay: Now w/h %dx%d l/t %dx%d\n", -+ f->fmt.win.w.width, f->fmt.win.w.height, -+ f->fmt.win.w.left, f->fmt.win.w.top); -+ -+ v4l2_dump_win_format(1, -+ bcm2835_v4l2_debug, -+ &dev->v4l2_dev, -+ &f->fmt.win, -+ __func__); -+ return 0; -+} -+ -+static int vidioc_s_fmt_vid_overlay(struct file *file, void *priv, -+ struct v4l2_format *f) -+{ -+ struct bm2835_mmal_dev *dev = video_drvdata(file); -+ -+ vidioc_try_fmt_vid_overlay(file, priv, f); -+ -+ dev->overlay = f->fmt.win; -+ if (dev->component[MMAL_COMPONENT_PREVIEW]->enabled) { -+ set_overlay_params(dev, -+ &dev->component[MMAL_COMPONENT_PREVIEW]->input[0]); -+ } -+ -+ return 0; -+} -+ -+static int vidioc_overlay(struct file *file, void *f, unsigned int on) -+{ -+ int ret; -+ struct bm2835_mmal_dev *dev = video_drvdata(file); -+ struct vchiq_mmal_port *src; -+ struct vchiq_mmal_port *dst; -+ if ((on && dev->component[MMAL_COMPONENT_PREVIEW]->enabled) || -+ (!on && !dev->component[MMAL_COMPONENT_PREVIEW]->enabled)) -+ return 0; /* already in requested state */ -+ -+ src = -+ &dev->component[MMAL_COMPONENT_CAMERA]-> -+ output[MMAL_CAMERA_PORT_PREVIEW]; -+ -+ if (!on) { -+ /* disconnect preview ports and disable component */ -+ ret = vchiq_mmal_port_disable(dev->instance, src); -+ if (!ret) -+ ret = -+ vchiq_mmal_port_connect_tunnel(dev->instance, src, -+ NULL); -+ if (ret >= 0) -+ ret = vchiq_mmal_component_disable( -+ dev->instance, -+ dev->component[MMAL_COMPONENT_PREVIEW]); -+ -+ disable_camera(dev); -+ return ret; -+ } -+ -+ /* set preview port format and connect it to output */ -+ dst = &dev->component[MMAL_COMPONENT_PREVIEW]->input[0]; -+ -+ ret = vchiq_mmal_port_set_format(dev->instance, src); -+ if (ret < 0) -+ goto error; -+ -+ ret = set_overlay_params(dev, dst); -+ if (ret < 0) -+ goto error; -+ -+ if (enable_camera(dev) < 0) -+ goto error; -+ -+ ret = vchiq_mmal_component_enable( -+ dev->instance, -+ dev->component[MMAL_COMPONENT_PREVIEW]); -+ if (ret < 0) -+ goto error; -+ -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "connecting %p to %p\n", -+ src, dst); -+ ret = vchiq_mmal_port_connect_tunnel(dev->instance, src, dst); -+ if (!ret) -+ ret = vchiq_mmal_port_enable(dev->instance, src, NULL); -+error: -+ return ret; -+} -+ -+static int vidioc_g_fbuf(struct file *file, void *fh, -+ struct v4l2_framebuffer *a) -+{ -+ /* The video overlay must stay within the framebuffer and can't be -+ positioned independently. */ -+ struct bm2835_mmal_dev *dev = video_drvdata(file); -+ struct vchiq_mmal_port *preview_port = -+ &dev->component[MMAL_COMPONENT_CAMERA]-> -+ output[MMAL_CAMERA_PORT_PREVIEW]; -+ -+ a->capability = V4L2_FBUF_CAP_EXTERNOVERLAY | -+ V4L2_FBUF_CAP_GLOBAL_ALPHA; -+ a->flags = V4L2_FBUF_FLAG_OVERLAY; -+ a->fmt.width = preview_port->es.video.width; -+ a->fmt.height = preview_port->es.video.height; -+ a->fmt.pixelformat = V4L2_PIX_FMT_YUV420; -+ a->fmt.bytesperline = preview_port->es.video.width; -+ a->fmt.sizeimage = (preview_port->es.video.width * -+ preview_port->es.video.height * 3)>>1; -+ a->fmt.colorspace = V4L2_COLORSPACE_SMPTE170M; -+ -+ return 0; -+} -+ -+/* input ioctls */ -+static int vidioc_enum_input(struct file *file, void *priv, -+ struct v4l2_input *inp) -+{ -+ /* only a single camera input */ -+ if (inp->index != 0) -+ return -EINVAL; -+ -+ inp->type = V4L2_INPUT_TYPE_CAMERA; -+ sprintf(inp->name, "Camera %u", inp->index); -+ return 0; -+} -+ -+static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) -+{ -+ *i = 0; -+ return 0; -+} -+ -+static int vidioc_s_input(struct file *file, void *priv, unsigned int i) -+{ -+ if (i != 0) -+ return -EINVAL; -+ -+ return 0; -+} -+ -+/* capture ioctls */ -+static int vidioc_querycap(struct file *file, void *priv, -+ struct v4l2_capability *cap) -+{ -+ struct bm2835_mmal_dev *dev = video_drvdata(file); -+ u32 major; -+ u32 minor; -+ -+ vchiq_mmal_version(dev->instance, &major, &minor); -+ -+ strcpy(cap->driver, "bm2835 mmal"); -+ snprintf(cap->card, sizeof(cap->card), "mmal service %d.%d", -+ major, minor); -+ -+ snprintf(cap->bus_info, sizeof(cap->bus_info), -+ "platform:%s", dev->v4l2_dev.name); -+ cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY | -+ V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; -+ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; -+ -+ return 0; -+} -+ -+static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, -+ struct v4l2_fmtdesc *f) -+{ -+ struct mmal_fmt *fmt; -+ -+ if (f->index >= ARRAY_SIZE(formats)) -+ return -EINVAL; -+ -+ fmt = &formats[f->index]; -+ -+ strlcpy(f->description, fmt->name, sizeof(f->description)); -+ f->pixelformat = fmt->fourcc; -+ f->flags = fmt->flags; -+ -+ return 0; -+} -+ -+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, -+ struct v4l2_format *f) -+{ -+ struct bm2835_mmal_dev *dev = video_drvdata(file); -+ -+ f->fmt.pix.width = dev->capture.width; -+ f->fmt.pix.height = dev->capture.height; -+ f->fmt.pix.field = V4L2_FIELD_NONE; -+ f->fmt.pix.pixelformat = dev->capture.fmt->fourcc; -+ f->fmt.pix.bytesperline = dev->capture.stride; -+ f->fmt.pix.sizeimage = dev->capture.buffersize; -+ -+ if (dev->capture.fmt->fourcc == V4L2_PIX_FMT_RGB24) -+ f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB; -+ else if (dev->capture.fmt->fourcc == V4L2_PIX_FMT_JPEG) -+ f->fmt.pix.colorspace = V4L2_COLORSPACE_JPEG; -+ else -+ f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; -+ f->fmt.pix.priv = 0; -+ -+ v4l2_dump_pix_format(1, bcm2835_v4l2_debug, &dev->v4l2_dev, &f->fmt.pix, -+ __func__); -+ return 0; -+} -+ -+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, -+ struct v4l2_format *f) -+{ -+ struct bm2835_mmal_dev *dev = video_drvdata(file); -+ struct mmal_fmt *mfmt; -+ -+ mfmt = get_format(f); -+ if (!mfmt) { -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Fourcc format (0x%08x) unknown.\n", -+ f->fmt.pix.pixelformat); -+ f->fmt.pix.pixelformat = formats[0].fourcc; -+ mfmt = get_format(f); -+ } -+ -+ f->fmt.pix.field = V4L2_FIELD_NONE; -+ -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Clipping/aligning %dx%d format %08X\n", -+ f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.pixelformat); -+ -+ v4l_bound_align_image(&f->fmt.pix.width, MIN_WIDTH, dev->max_width, 1, -+ &f->fmt.pix.height, MIN_HEIGHT, dev->max_height, -+ 1, 0); -+ f->fmt.pix.bytesperline = f->fmt.pix.width * mfmt->ybbp; -+ -+ /* Image buffer has to be padded to allow for alignment, even though -+ * we then remove that padding before delivering the buffer. -+ */ -+ f->fmt.pix.sizeimage = ((f->fmt.pix.height+15)&~15) * -+ (((f->fmt.pix.width+31)&~31) * mfmt->depth) >> 3; -+ -+ if ((mfmt->flags & V4L2_FMT_FLAG_COMPRESSED) && -+ f->fmt.pix.sizeimage < MIN_BUFFER_SIZE) -+ f->fmt.pix.sizeimage = MIN_BUFFER_SIZE; -+ -+ if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB24) -+ f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB; -+ else if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_JPEG) -+ f->fmt.pix.colorspace = V4L2_COLORSPACE_JPEG; -+ else -+ f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; -+ f->fmt.pix.priv = 0; -+ -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Now %dx%d format %08X\n", -+ f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.pixelformat); -+ -+ v4l2_dump_pix_format(1, bcm2835_v4l2_debug, &dev->v4l2_dev, &f->fmt.pix, -+ __func__); -+ return 0; -+} -+ -+static int mmal_setup_components(struct bm2835_mmal_dev *dev, -+ struct v4l2_format *f) -+{ -+ int ret; -+ struct vchiq_mmal_port *port = NULL, *camera_port = NULL; -+ struct vchiq_mmal_component *encode_component = NULL; -+ struct mmal_fmt *mfmt = get_format(f); -+ -+ BUG_ON(!mfmt); -+ -+ if (dev->capture.encode_component) { -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "vid_cap - disconnect previous tunnel\n"); -+ -+ /* Disconnect any previous connection */ -+ vchiq_mmal_port_connect_tunnel(dev->instance, -+ dev->capture.camera_port, NULL); -+ dev->capture.camera_port = NULL; -+ ret = vchiq_mmal_component_disable(dev->instance, -+ dev->capture. -+ encode_component); -+ if (ret) -+ v4l2_err(&dev->v4l2_dev, -+ "Failed to disable encode component %d\n", -+ ret); -+ -+ dev->capture.encode_component = NULL; -+ } -+ /* format dependant port setup */ -+ switch (mfmt->mmal_component) { -+ case MMAL_COMPONENT_CAMERA: -+ /* Make a further decision on port based on resolution */ -+ if (f->fmt.pix.width <= max_video_width -+ && f->fmt.pix.height <= max_video_height) -+ camera_port = port = -+ &dev->component[MMAL_COMPONENT_CAMERA]-> -+ output[MMAL_CAMERA_PORT_VIDEO]; -+ else -+ camera_port = port = -+ &dev->component[MMAL_COMPONENT_CAMERA]-> -+ output[MMAL_CAMERA_PORT_CAPTURE]; -+ break; -+ case MMAL_COMPONENT_IMAGE_ENCODE: -+ encode_component = dev->component[MMAL_COMPONENT_IMAGE_ENCODE]; -+ port = &dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->output[0]; -+ camera_port = -+ &dev->component[MMAL_COMPONENT_CAMERA]-> -+ output[MMAL_CAMERA_PORT_CAPTURE]; -+ break; -+ case MMAL_COMPONENT_VIDEO_ENCODE: -+ encode_component = dev->component[MMAL_COMPONENT_VIDEO_ENCODE]; -+ port = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; -+ camera_port = -+ &dev->component[MMAL_COMPONENT_CAMERA]-> -+ output[MMAL_CAMERA_PORT_VIDEO]; -+ break; -+ default: -+ break; -+ } -+ -+ if (!port) -+ return -EINVAL; -+ -+ if (encode_component) -+ camera_port->format.encoding = MMAL_ENCODING_OPAQUE; -+ else -+ camera_port->format.encoding = mfmt->mmal; -+ -+ if (dev->rgb_bgr_swapped) { -+ if (camera_port->format.encoding == MMAL_ENCODING_RGB24) -+ camera_port->format.encoding = MMAL_ENCODING_BGR24; -+ else if (camera_port->format.encoding == MMAL_ENCODING_BGR24) -+ camera_port->format.encoding = MMAL_ENCODING_RGB24; -+ } -+ -+ camera_port->format.encoding_variant = 0; -+ camera_port->es.video.width = f->fmt.pix.width; -+ camera_port->es.video.height = f->fmt.pix.height; -+ camera_port->es.video.crop.x = 0; -+ camera_port->es.video.crop.y = 0; -+ camera_port->es.video.crop.width = f->fmt.pix.width; -+ camera_port->es.video.crop.height = f->fmt.pix.height; -+ camera_port->es.video.frame_rate.num = 0; -+ camera_port->es.video.frame_rate.den = 1; -+ camera_port->es.video.color_space = MMAL_COLOR_SPACE_JPEG_JFIF; -+ -+ ret = vchiq_mmal_port_set_format(dev->instance, camera_port); -+ -+ if (!ret -+ && camera_port == -+ &dev->component[MMAL_COMPONENT_CAMERA]-> -+ output[MMAL_CAMERA_PORT_VIDEO]) { -+ bool overlay_enabled = -+ !!dev->component[MMAL_COMPONENT_PREVIEW]->enabled; -+ struct vchiq_mmal_port *preview_port = -+ &dev->component[MMAL_COMPONENT_CAMERA]-> -+ output[MMAL_CAMERA_PORT_PREVIEW]; -+ /* Preview and encode ports need to match on resolution */ -+ if (overlay_enabled) { -+ /* Need to disable the overlay before we can update -+ * the resolution -+ */ -+ ret = -+ vchiq_mmal_port_disable(dev->instance, -+ preview_port); -+ if (!ret) -+ ret = -+ vchiq_mmal_port_connect_tunnel( -+ dev->instance, -+ preview_port, -+ NULL); -+ } -+ preview_port->es.video.width = f->fmt.pix.width; -+ preview_port->es.video.height = f->fmt.pix.height; -+ preview_port->es.video.crop.x = 0; -+ preview_port->es.video.crop.y = 0; -+ preview_port->es.video.crop.width = f->fmt.pix.width; -+ preview_port->es.video.crop.height = f->fmt.pix.height; -+ preview_port->es.video.frame_rate.num = -+ dev->capture.timeperframe.denominator; -+ preview_port->es.video.frame_rate.den = -+ dev->capture.timeperframe.numerator; -+ ret = vchiq_mmal_port_set_format(dev->instance, preview_port); -+ if (overlay_enabled) { -+ ret = vchiq_mmal_port_connect_tunnel( -+ dev->instance, -+ preview_port, -+ &dev->component[MMAL_COMPONENT_PREVIEW]->input[0]); -+ if (!ret) -+ ret = vchiq_mmal_port_enable(dev->instance, -+ preview_port, -+ NULL); -+ } -+ } -+ -+ if (ret) { -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "%s failed to set format %dx%d %08X\n", __func__, -+ f->fmt.pix.width, f->fmt.pix.height, -+ f->fmt.pix.pixelformat); -+ /* ensure capture is not going to be tried */ -+ dev->capture.port = NULL; -+ } else { -+ if (encode_component) { -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "vid_cap - set up encode comp\n"); -+ -+ /* configure buffering */ -+ camera_port->current_buffer.size = -+ camera_port->recommended_buffer.size; -+ camera_port->current_buffer.num = -+ camera_port->recommended_buffer.num; -+ -+ ret = -+ vchiq_mmal_port_connect_tunnel( -+ dev->instance, -+ camera_port, -+ &encode_component->input[0]); -+ if (ret) { -+ v4l2_dbg(1, bcm2835_v4l2_debug, -+ &dev->v4l2_dev, -+ "%s failed to create connection\n", -+ __func__); -+ /* ensure capture is not going to be tried */ -+ dev->capture.port = NULL; -+ } else { -+ port->es.video.width = f->fmt.pix.width; -+ port->es.video.height = f->fmt.pix.height; -+ port->es.video.crop.x = 0; -+ port->es.video.crop.y = 0; -+ port->es.video.crop.width = f->fmt.pix.width; -+ port->es.video.crop.height = f->fmt.pix.height; -+ port->es.video.frame_rate.num = -+ dev->capture.timeperframe.denominator; -+ port->es.video.frame_rate.den = -+ dev->capture.timeperframe.numerator; -+ -+ port->format.encoding = mfmt->mmal; -+ port->format.encoding_variant = 0; -+ /* Set any encoding specific parameters */ -+ switch (mfmt->mmal_component) { -+ case MMAL_COMPONENT_VIDEO_ENCODE: -+ port->format.bitrate = -+ dev->capture.encode_bitrate; -+ break; -+ case MMAL_COMPONENT_IMAGE_ENCODE: -+ /* Could set EXIF parameters here */ -+ break; -+ default: -+ break; -+ } -+ ret = vchiq_mmal_port_set_format(dev->instance, -+ port); -+ if (ret) -+ v4l2_dbg(1, bcm2835_v4l2_debug, -+ &dev->v4l2_dev, -+ "%s failed to set format %dx%d fmt %08X\n", -+ __func__, -+ f->fmt.pix.width, -+ f->fmt.pix.height, -+ f->fmt.pix.pixelformat -+ ); -+ } -+ -+ if (!ret) { -+ ret = vchiq_mmal_component_enable( -+ dev->instance, -+ encode_component); -+ if (ret) { -+ v4l2_dbg(1, bcm2835_v4l2_debug, -+ &dev->v4l2_dev, -+ "%s Failed to enable encode components\n", -+ __func__); -+ } -+ } -+ if (!ret) { -+ /* configure buffering */ -+ port->current_buffer.num = 1; -+ port->current_buffer.size = -+ f->fmt.pix.sizeimage; -+ if (port->format.encoding == -+ MMAL_ENCODING_JPEG) { -+ v4l2_dbg(1, bcm2835_v4l2_debug, -+ &dev->v4l2_dev, -+ "JPG - buf size now %d was %d\n", -+ f->fmt.pix.sizeimage, -+ port->current_buffer.size); -+ port->current_buffer.size = -+ (f->fmt.pix.sizeimage < -+ (100 << 10)) -+ ? (100 << 10) : f->fmt.pix. -+ sizeimage; -+ } -+ v4l2_dbg(1, bcm2835_v4l2_debug, -+ &dev->v4l2_dev, -+ "vid_cap - cur_buf.size set to %d\n", -+ f->fmt.pix.sizeimage); -+ port->current_buffer.alignment = 0; -+ } -+ } else { -+ /* configure buffering */ -+ camera_port->current_buffer.num = 1; -+ camera_port->current_buffer.size = f->fmt.pix.sizeimage; -+ camera_port->current_buffer.alignment = 0; -+ } -+ -+ if (!ret) { -+ dev->capture.fmt = mfmt; -+ dev->capture.stride = f->fmt.pix.bytesperline; -+ dev->capture.width = camera_port->es.video.crop.width; -+ dev->capture.height = camera_port->es.video.crop.height; -+ dev->capture.buffersize = port->current_buffer.size; -+ -+ /* select port for capture */ -+ dev->capture.port = port; -+ dev->capture.camera_port = camera_port; -+ dev->capture.encode_component = encode_component; -+ v4l2_dbg(1, bcm2835_v4l2_debug, -+ &dev->v4l2_dev, -+ "Set dev->capture.fmt %08X, %dx%d, stride %d, size %d", -+ port->format.encoding, -+ dev->capture.width, dev->capture.height, -+ dev->capture.stride, dev->capture.buffersize); -+ } -+ } -+ -+ /* todo: Need to convert the vchiq/mmal error into a v4l2 error. */ -+ return ret; -+} -+ -+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, -+ struct v4l2_format *f) -+{ -+ int ret; -+ struct bm2835_mmal_dev *dev = video_drvdata(file); -+ struct mmal_fmt *mfmt; -+ -+ /* try the format to set valid parameters */ -+ ret = vidioc_try_fmt_vid_cap(file, priv, f); -+ if (ret) { -+ v4l2_err(&dev->v4l2_dev, -+ "vid_cap - vidioc_try_fmt_vid_cap failed\n"); -+ return ret; -+ } -+ -+ /* if a capture is running refuse to set format */ -+ if (vb2_is_busy(&dev->capture.vb_vidq)) { -+ v4l2_info(&dev->v4l2_dev, "%s device busy\n", __func__); -+ return -EBUSY; -+ } -+ -+ /* If the format is unsupported v4l2 says we should switch to -+ * a supported one and not return an error. */ -+ mfmt = get_format(f); -+ if (!mfmt) { -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Fourcc format (0x%08x) unknown.\n", -+ f->fmt.pix.pixelformat); -+ f->fmt.pix.pixelformat = formats[0].fourcc; -+ mfmt = get_format(f); -+ } -+ -+ ret = mmal_setup_components(dev, f); -+ if (ret != 0) { -+ v4l2_err(&dev->v4l2_dev, -+ "%s: failed to setup mmal components: %d\n", -+ __func__, ret); -+ ret = -EINVAL; -+ } -+ -+ return ret; -+} -+ -+int vidioc_enum_framesizes(struct file *file, void *fh, -+ struct v4l2_frmsizeenum *fsize) -+{ -+ struct bm2835_mmal_dev *dev = video_drvdata(file); -+ static const struct v4l2_frmsize_stepwise sizes = { -+ MIN_WIDTH, 0, 2, -+ MIN_HEIGHT, 0, 2 -+ }; -+ int i; -+ -+ if (fsize->index) -+ return -EINVAL; -+ for (i = 0; i < ARRAY_SIZE(formats); i++) -+ if (formats[i].fourcc == fsize->pixel_format) -+ break; -+ if (i == ARRAY_SIZE(formats)) -+ return -EINVAL; -+ fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE; -+ fsize->stepwise = sizes; -+ fsize->stepwise.max_width = dev->max_width; -+ fsize->stepwise.max_height = dev->max_height; -+ return 0; -+} -+ -+/* timeperframe is arbitrary and continous */ -+static int vidioc_enum_frameintervals(struct file *file, void *priv, -+ struct v4l2_frmivalenum *fival) -+{ -+ struct bm2835_mmal_dev *dev = video_drvdata(file); -+ int i; -+ -+ if (fival->index) -+ return -EINVAL; -+ -+ for (i = 0; i < ARRAY_SIZE(formats); i++) -+ if (formats[i].fourcc == fival->pixel_format) -+ break; -+ if (i == ARRAY_SIZE(formats)) -+ return -EINVAL; -+ -+ /* regarding width & height - we support any within range */ -+ if (fival->width < MIN_WIDTH || fival->width > dev->max_width || -+ fival->height < MIN_HEIGHT || fival->height > dev->max_height) -+ return -EINVAL; -+ -+ fival->type = V4L2_FRMIVAL_TYPE_CONTINUOUS; -+ -+ /* fill in stepwise (step=1.0 is requred by V4L2 spec) */ -+ fival->stepwise.min = tpf_min; -+ fival->stepwise.max = tpf_max; -+ fival->stepwise.step = (struct v4l2_fract) {1, 1}; -+ -+ return 0; -+} -+ -+static int vidioc_g_parm(struct file *file, void *priv, -+ struct v4l2_streamparm *parm) -+{ -+ struct bm2835_mmal_dev *dev = video_drvdata(file); -+ -+ if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) -+ return -EINVAL; -+ -+ parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME; -+ parm->parm.capture.timeperframe = dev->capture.timeperframe; -+ parm->parm.capture.readbuffers = 1; -+ return 0; -+} -+ -+#define FRACT_CMP(a, OP, b) \ -+ ((u64)(a).numerator * (b).denominator OP \ -+ (u64)(b).numerator * (a).denominator) -+ -+static int vidioc_s_parm(struct file *file, void *priv, -+ struct v4l2_streamparm *parm) -+{ -+ struct bm2835_mmal_dev *dev = video_drvdata(file); -+ struct v4l2_fract tpf; -+ struct mmal_parameter_rational fps_param; -+ -+ if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) -+ return -EINVAL; -+ -+ tpf = parm->parm.capture.timeperframe; -+ -+ /* tpf: {*, 0} resets timing; clip to [min, max]*/ -+ tpf = tpf.denominator ? tpf : tpf_default; -+ tpf = FRACT_CMP(tpf, <, tpf_min) ? tpf_min : tpf; -+ tpf = FRACT_CMP(tpf, >, tpf_max) ? tpf_max : tpf; -+ -+ dev->capture.timeperframe = tpf; -+ parm->parm.capture.timeperframe = tpf; -+ parm->parm.capture.readbuffers = 1; -+ parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME; -+ -+ fps_param.num = 0; /* Select variable fps, and then use -+ * FPS_RANGE to select the actual limits. -+ */ -+ fps_param.den = 1; -+ set_framerate_params(dev); -+ -+ return 0; -+} -+ -+static const struct v4l2_ioctl_ops camera0_ioctl_ops = { -+ /* overlay */ -+ .vidioc_enum_fmt_vid_overlay = vidioc_enum_fmt_vid_overlay, -+ .vidioc_g_fmt_vid_overlay = vidioc_g_fmt_vid_overlay, -+ .vidioc_try_fmt_vid_overlay = vidioc_try_fmt_vid_overlay, -+ .vidioc_s_fmt_vid_overlay = vidioc_s_fmt_vid_overlay, -+ .vidioc_overlay = vidioc_overlay, -+ .vidioc_g_fbuf = vidioc_g_fbuf, -+ -+ /* inputs */ -+ .vidioc_enum_input = vidioc_enum_input, -+ .vidioc_g_input = vidioc_g_input, -+ .vidioc_s_input = vidioc_s_input, -+ -+ /* capture */ -+ .vidioc_querycap = vidioc_querycap, -+ .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, -+ .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, -+ .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, -+ .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, -+ -+ /* buffer management */ -+ .vidioc_reqbufs = vb2_ioctl_reqbufs, -+ .vidioc_create_bufs = vb2_ioctl_create_bufs, -+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf, -+ .vidioc_querybuf = vb2_ioctl_querybuf, -+ .vidioc_qbuf = vb2_ioctl_qbuf, -+ .vidioc_dqbuf = vb2_ioctl_dqbuf, -+ .vidioc_enum_framesizes = vidioc_enum_framesizes, -+ .vidioc_enum_frameintervals = vidioc_enum_frameintervals, -+ .vidioc_g_parm = vidioc_g_parm, -+ .vidioc_s_parm = vidioc_s_parm, -+ .vidioc_streamon = vb2_ioctl_streamon, -+ .vidioc_streamoff = vb2_ioctl_streamoff, -+ -+ .vidioc_log_status = v4l2_ctrl_log_status, -+ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, -+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe, -+}; -+ -+static const struct v4l2_ioctl_ops camera0_ioctl_ops_gstreamer = { -+ /* overlay */ -+ .vidioc_enum_fmt_vid_overlay = vidioc_enum_fmt_vid_overlay, -+ .vidioc_g_fmt_vid_overlay = vidioc_g_fmt_vid_overlay, -+ .vidioc_try_fmt_vid_overlay = vidioc_try_fmt_vid_overlay, -+ .vidioc_s_fmt_vid_overlay = vidioc_s_fmt_vid_overlay, -+ .vidioc_overlay = vidioc_overlay, -+ .vidioc_g_fbuf = vidioc_g_fbuf, -+ -+ /* inputs */ -+ .vidioc_enum_input = vidioc_enum_input, -+ .vidioc_g_input = vidioc_g_input, -+ .vidioc_s_input = vidioc_s_input, -+ -+ /* capture */ -+ .vidioc_querycap = vidioc_querycap, -+ .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, -+ .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, -+ .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, -+ .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, -+ -+ /* buffer management */ -+ .vidioc_reqbufs = vb2_ioctl_reqbufs, -+ .vidioc_create_bufs = vb2_ioctl_create_bufs, -+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf, -+ .vidioc_querybuf = vb2_ioctl_querybuf, -+ .vidioc_qbuf = vb2_ioctl_qbuf, -+ .vidioc_dqbuf = vb2_ioctl_dqbuf, -+ /* Remove this function ptr to fix gstreamer bug -+ .vidioc_enum_framesizes = vidioc_enum_framesizes, */ -+ .vidioc_enum_frameintervals = vidioc_enum_frameintervals, -+ .vidioc_g_parm = vidioc_g_parm, -+ .vidioc_s_parm = vidioc_s_parm, -+ .vidioc_streamon = vb2_ioctl_streamon, -+ .vidioc_streamoff = vb2_ioctl_streamoff, -+ -+ .vidioc_log_status = v4l2_ctrl_log_status, -+ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, -+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe, -+}; -+ -+/* ------------------------------------------------------------------ -+ Driver init/finalise -+ ------------------------------------------------------------------*/ -+ -+static const struct v4l2_file_operations camera0_fops = { -+ .owner = THIS_MODULE, -+ .open = v4l2_fh_open, -+ .release = vb2_fop_release, -+ .read = vb2_fop_read, -+ .poll = vb2_fop_poll, -+ .unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */ -+ .mmap = vb2_fop_mmap, -+}; -+ -+static struct video_device vdev_template = { -+ .name = "camera0", -+ .fops = &camera0_fops, -+ .ioctl_ops = &camera0_ioctl_ops, -+ .release = video_device_release_empty, -+}; -+ -+/* Returns the number of cameras, and also the max resolution supported -+ * by those cameras. -+ */ -+static int get_num_cameras(struct vchiq_mmal_instance *instance, -+ unsigned int resolutions[][2], int num_resolutions) -+{ -+ int ret; -+ struct vchiq_mmal_component *cam_info_component; -+ struct mmal_parameter_camera_info_t cam_info = {0}; -+ int param_size = sizeof(cam_info); -+ int i; -+ -+ /* create a camera_info component */ -+ ret = vchiq_mmal_component_init(instance, "camera_info", -+ &cam_info_component); -+ if (ret < 0) -+ /* Unusual failure - let's guess one camera. */ -+ return 1; -+ -+ if (vchiq_mmal_port_parameter_get(instance, -+ &cam_info_component->control, -+ MMAL_PARAMETER_CAMERA_INFO, -+ &cam_info, -+ ¶m_size)) { -+ pr_info("Failed to get camera info\n"); -+ } -+ for (i = 0; -+ i < (cam_info.num_cameras > num_resolutions ? -+ num_resolutions : -+ cam_info.num_cameras); -+ i++) { -+ resolutions[i][0] = cam_info.cameras[i].max_width; -+ resolutions[i][1] = cam_info.cameras[i].max_height; -+ } -+ -+ vchiq_mmal_component_finalise(instance, -+ cam_info_component); -+ -+ return cam_info.num_cameras; -+} -+ -+static int set_camera_parameters(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *camera, -+ struct bm2835_mmal_dev *dev) -+{ -+ int ret; -+ struct mmal_parameter_camera_config cam_config = { -+ .max_stills_w = dev->max_width, -+ .max_stills_h = dev->max_height, -+ .stills_yuv422 = 1, -+ .one_shot_stills = 1, -+ .max_preview_video_w = (max_video_width > 1920) ? -+ max_video_width : 1920, -+ .max_preview_video_h = (max_video_height > 1088) ? -+ max_video_height : 1088, -+ .num_preview_video_frames = 3, -+ .stills_capture_circular_buffer_height = 0, -+ .fast_preview_resume = 0, -+ .use_stc_timestamp = MMAL_PARAM_TIMESTAMP_MODE_RAW_STC -+ }; -+ -+ ret = vchiq_mmal_port_parameter_set(instance, &camera->control, -+ MMAL_PARAMETER_CAMERA_CONFIG, -+ &cam_config, sizeof(cam_config)); -+ return ret; -+} -+ -+#define MAX_SUPPORTED_ENCODINGS 20 -+ -+/* MMAL instance and component init */ -+static int __init mmal_init(struct bm2835_mmal_dev *dev) -+{ -+ int ret; -+ struct mmal_es_format *format; -+ u32 bool_true = 1; -+ u32 supported_encodings[MAX_SUPPORTED_ENCODINGS]; -+ int param_size; -+ struct vchiq_mmal_component *camera; -+ -+ ret = vchiq_mmal_init(&dev->instance); -+ if (ret < 0) -+ return ret; -+ -+ /* get the camera component ready */ -+ ret = vchiq_mmal_component_init(dev->instance, "ril.camera", -+ &dev->component[MMAL_COMPONENT_CAMERA]); -+ if (ret < 0) -+ goto unreg_mmal; -+ -+ camera = dev->component[MMAL_COMPONENT_CAMERA]; -+ if (camera->outputs < MMAL_CAMERA_PORT_COUNT) { -+ ret = -EINVAL; -+ goto unreg_camera; -+ } -+ -+ ret = set_camera_parameters(dev->instance, -+ camera, -+ dev); -+ if (ret < 0) -+ goto unreg_camera; -+ -+ /* There was an error in the firmware that meant the camera component -+ * produced BGR instead of RGB. -+ * This is now fixed, but in order to support the old firmwares, we -+ * have to check. -+ */ -+ dev->rgb_bgr_swapped = true; -+ param_size = sizeof(supported_encodings); -+ ret = vchiq_mmal_port_parameter_get(dev->instance, -+ &camera->output[MMAL_CAMERA_PORT_CAPTURE], -+ MMAL_PARAMETER_SUPPORTED_ENCODINGS, -+ &supported_encodings, -+ ¶m_size); -+ if (ret == 0) { -+ int i; -+ -+ for (i = 0; i < param_size/sizeof(u32); i++) { -+ if (supported_encodings[i] == MMAL_ENCODING_BGR24) { -+ /* Found BGR24 first - old firmware. */ -+ break; -+ } -+ if (supported_encodings[i] == MMAL_ENCODING_RGB24) { -+ /* Found RGB24 first -+ * new firmware, so use RGB24. -+ */ -+ dev->rgb_bgr_swapped = false; -+ break; -+ } -+ } -+ } -+ format = &camera->output[MMAL_CAMERA_PORT_PREVIEW].format; -+ -+ format->encoding = MMAL_ENCODING_OPAQUE; -+ format->encoding_variant = MMAL_ENCODING_I420; -+ -+ format->es->video.width = 1024; -+ format->es->video.height = 768; -+ format->es->video.crop.x = 0; -+ format->es->video.crop.y = 0; -+ format->es->video.crop.width = 1024; -+ format->es->video.crop.height = 768; -+ format->es->video.frame_rate.num = 0; /* Rely on fps_range */ -+ format->es->video.frame_rate.den = 1; -+ -+ format = &camera->output[MMAL_CAMERA_PORT_VIDEO].format; -+ -+ format->encoding = MMAL_ENCODING_OPAQUE; -+ format->encoding_variant = MMAL_ENCODING_I420; -+ -+ format->es->video.width = 1024; -+ format->es->video.height = 768; -+ format->es->video.crop.x = 0; -+ format->es->video.crop.y = 0; -+ format->es->video.crop.width = 1024; -+ format->es->video.crop.height = 768; -+ format->es->video.frame_rate.num = 0; /* Rely on fps_range */ -+ format->es->video.frame_rate.den = 1; -+ -+ vchiq_mmal_port_parameter_set(dev->instance, -+ &camera->output[MMAL_CAMERA_PORT_VIDEO], -+ MMAL_PARAMETER_NO_IMAGE_PADDING, -+ &bool_true, sizeof(bool_true)); -+ -+ format = &camera->output[MMAL_CAMERA_PORT_CAPTURE].format; -+ -+ format->encoding = MMAL_ENCODING_OPAQUE; -+ -+ format->es->video.width = 2592; -+ format->es->video.height = 1944; -+ format->es->video.crop.x = 0; -+ format->es->video.crop.y = 0; -+ format->es->video.crop.width = 2592; -+ format->es->video.crop.height = 1944; -+ format->es->video.frame_rate.num = 0; /* Rely on fps_range */ -+ format->es->video.frame_rate.den = 1; -+ -+ dev->capture.width = format->es->video.width; -+ dev->capture.height = format->es->video.height; -+ dev->capture.fmt = &formats[0]; -+ dev->capture.encode_component = NULL; -+ dev->capture.timeperframe = tpf_default; -+ dev->capture.enc_profile = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH; -+ dev->capture.enc_level = V4L2_MPEG_VIDEO_H264_LEVEL_4_0; -+ -+ vchiq_mmal_port_parameter_set(dev->instance, -+ &camera->output[MMAL_CAMERA_PORT_CAPTURE], -+ MMAL_PARAMETER_NO_IMAGE_PADDING, -+ &bool_true, sizeof(bool_true)); -+ -+ /* get the preview component ready */ -+ ret = vchiq_mmal_component_init( -+ dev->instance, "ril.video_render", -+ &dev->component[MMAL_COMPONENT_PREVIEW]); -+ if (ret < 0) -+ goto unreg_camera; -+ -+ if (dev->component[MMAL_COMPONENT_PREVIEW]->inputs < 1) { -+ ret = -EINVAL; -+ pr_debug("too few input ports %d needed %d\n", -+ dev->component[MMAL_COMPONENT_PREVIEW]->inputs, 1); -+ goto unreg_preview; -+ } -+ -+ /* get the image encoder component ready */ -+ ret = vchiq_mmal_component_init( -+ dev->instance, "ril.image_encode", -+ &dev->component[MMAL_COMPONENT_IMAGE_ENCODE]); -+ if (ret < 0) -+ goto unreg_preview; -+ -+ if (dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs < 1) { -+ ret = -EINVAL; -+ v4l2_err(&dev->v4l2_dev, "too few input ports %d needed %d\n", -+ dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs, -+ 1); -+ goto unreg_image_encoder; -+ } -+ -+ /* get the video encoder component ready */ -+ ret = vchiq_mmal_component_init(dev->instance, "ril.video_encode", -+ &dev-> -+ component[MMAL_COMPONENT_VIDEO_ENCODE]); -+ if (ret < 0) -+ goto unreg_image_encoder; -+ -+ if (dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs < 1) { -+ ret = -EINVAL; -+ v4l2_err(&dev->v4l2_dev, "too few input ports %d needed %d\n", -+ dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs, -+ 1); -+ goto unreg_vid_encoder; -+ } -+ -+ { -+ struct vchiq_mmal_port *encoder_port = -+ &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; -+ encoder_port->format.encoding = MMAL_ENCODING_H264; -+ ret = vchiq_mmal_port_set_format(dev->instance, -+ encoder_port); -+ } -+ -+ { -+ unsigned int enable = 1; -+ vchiq_mmal_port_parameter_set( -+ dev->instance, -+ &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->control, -+ MMAL_PARAMETER_VIDEO_IMMUTABLE_INPUT, -+ &enable, sizeof(enable)); -+ -+ vchiq_mmal_port_parameter_set(dev->instance, -+ &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->control, -+ MMAL_PARAMETER_MINIMISE_FRAGMENTATION, -+ &enable, -+ sizeof(enable)); -+ } -+ ret = bm2835_mmal_set_all_camera_controls(dev); -+ if (ret < 0) -+ goto unreg_vid_encoder; -+ -+ return 0; -+ -+unreg_vid_encoder: -+ pr_err("Cleanup: Destroy video encoder\n"); -+ vchiq_mmal_component_finalise( -+ dev->instance, -+ dev->component[MMAL_COMPONENT_VIDEO_ENCODE]); -+ -+unreg_image_encoder: -+ pr_err("Cleanup: Destroy image encoder\n"); -+ vchiq_mmal_component_finalise( -+ dev->instance, -+ dev->component[MMAL_COMPONENT_IMAGE_ENCODE]); -+ -+unreg_preview: -+ pr_err("Cleanup: Destroy video render\n"); -+ vchiq_mmal_component_finalise(dev->instance, -+ dev->component[MMAL_COMPONENT_PREVIEW]); -+ -+unreg_camera: -+ pr_err("Cleanup: Destroy camera\n"); -+ vchiq_mmal_component_finalise(dev->instance, -+ dev->component[MMAL_COMPONENT_CAMERA]); -+ -+unreg_mmal: -+ vchiq_mmal_finalise(dev->instance); -+ return ret; -+} -+ -+static int __init bm2835_mmal_init_device(struct bm2835_mmal_dev *dev, -+ struct video_device *vfd) -+{ -+ int ret; -+ -+ *vfd = vdev_template; -+ if (gst_v4l2src_is_broken) { -+ v4l2_info(&dev->v4l2_dev, -+ "Work-around for gstreamer issue is active.\n"); -+ vfd->ioctl_ops = &camera0_ioctl_ops_gstreamer; -+ } -+ -+ vfd->v4l2_dev = &dev->v4l2_dev; -+ -+ vfd->lock = &dev->mutex; -+ -+ vfd->queue = &dev->capture.vb_vidq; -+ -+ /* video device needs to be able to access instance data */ -+ video_set_drvdata(vfd, dev); -+ -+ ret = video_register_device(vfd, -+ VFL_TYPE_GRABBER, -+ video_nr[dev->camera_num]); -+ if (ret < 0) -+ return ret; -+ -+ v4l2_info(vfd->v4l2_dev, -+ "V4L2 device registered as %s - stills mode > %dx%d\n", -+ video_device_node_name(vfd), max_video_width, max_video_height); -+ -+ return 0; -+} -+ -+void bcm2835_cleanup_instance(struct bm2835_mmal_dev *dev) -+{ -+ if (!dev) -+ return; -+ -+ v4l2_info(&dev->v4l2_dev, "unregistering %s\n", -+ video_device_node_name(&dev->vdev)); -+ -+ video_unregister_device(&dev->vdev); -+ -+ if (dev->capture.encode_component) { -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "mmal_exit - disconnect tunnel\n"); -+ vchiq_mmal_port_connect_tunnel(dev->instance, -+ dev->capture.camera_port, NULL); -+ vchiq_mmal_component_disable(dev->instance, -+ dev->capture.encode_component); -+ } -+ vchiq_mmal_component_disable(dev->instance, -+ dev->component[MMAL_COMPONENT_CAMERA]); -+ -+ vchiq_mmal_component_finalise(dev->instance, -+ dev-> -+ component[MMAL_COMPONENT_VIDEO_ENCODE]); -+ -+ vchiq_mmal_component_finalise(dev->instance, -+ dev-> -+ component[MMAL_COMPONENT_IMAGE_ENCODE]); -+ -+ vchiq_mmal_component_finalise(dev->instance, -+ dev->component[MMAL_COMPONENT_PREVIEW]); -+ -+ vchiq_mmal_component_finalise(dev->instance, -+ dev->component[MMAL_COMPONENT_CAMERA]); -+ -+ v4l2_ctrl_handler_free(&dev->ctrl_handler); -+ -+ v4l2_device_unregister(&dev->v4l2_dev); -+ -+ kfree(dev); -+} -+ -+static struct v4l2_format default_v4l2_format = { -+ .fmt.pix.pixelformat = V4L2_PIX_FMT_JPEG, -+ .fmt.pix.width = 1024, -+ .fmt.pix.bytesperline = 0, -+ .fmt.pix.height = 768, -+ .fmt.pix.sizeimage = 1024*768, -+}; -+ -+static int __init bm2835_mmal_init(void) -+{ -+ int ret; -+ struct bm2835_mmal_dev *dev; -+ struct vb2_queue *q; -+ int camera; -+ unsigned int num_cameras; -+ struct vchiq_mmal_instance *instance; -+ unsigned int resolutions[MAX_BCM2835_CAMERAS][2]; -+ -+ ret = vchiq_mmal_init(&instance); -+ if (ret < 0) -+ return ret; -+ -+ num_cameras = get_num_cameras(instance, -+ resolutions, -+ MAX_BCM2835_CAMERAS); -+ if (num_cameras > MAX_BCM2835_CAMERAS) -+ num_cameras = MAX_BCM2835_CAMERAS; -+ -+ for (camera = 0; camera < num_cameras; camera++) { -+ dev = kzalloc(sizeof(struct bm2835_mmal_dev), GFP_KERNEL); -+ if (!dev) -+ return -ENOMEM; -+ -+ dev->camera_num = camera; -+ dev->max_width = resolutions[camera][0]; -+ dev->max_height = resolutions[camera][1]; -+ -+ /* setup device defaults */ -+ dev->overlay.w.left = 150; -+ dev->overlay.w.top = 50; -+ dev->overlay.w.width = 1024; -+ dev->overlay.w.height = 768; -+ dev->overlay.clipcount = 0; -+ dev->overlay.field = V4L2_FIELD_NONE; -+ dev->overlay.global_alpha = 255; -+ -+ dev->capture.fmt = &formats[3]; /* JPEG */ -+ -+ /* v4l device registration */ -+ snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name), -+ "%s", BM2835_MMAL_MODULE_NAME); -+ ret = v4l2_device_register(NULL, &dev->v4l2_dev); -+ if (ret) -+ goto free_dev; -+ -+ /* setup v4l controls */ -+ ret = bm2835_mmal_init_controls(dev, &dev->ctrl_handler); -+ if (ret < 0) -+ goto unreg_dev; -+ dev->v4l2_dev.ctrl_handler = &dev->ctrl_handler; -+ -+ /* mmal init */ -+ dev->instance = instance; -+ ret = mmal_init(dev); -+ if (ret < 0) -+ goto unreg_dev; -+ -+ /* initialize queue */ -+ q = &dev->capture.vb_vidq; -+ memset(q, 0, sizeof(*q)); -+ q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; -+ q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ; -+ q->drv_priv = dev; -+ q->buf_struct_size = sizeof(struct mmal_buffer); -+ q->ops = &bm2835_mmal_video_qops; -+ q->mem_ops = &vb2_vmalloc_memops; -+ q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; -+ ret = vb2_queue_init(q); -+ if (ret < 0) -+ goto unreg_dev; -+ -+ /* v4l2 core mutex used to protect all fops and v4l2 ioctls. */ -+ mutex_init(&dev->mutex); -+ -+ /* initialise video devices */ -+ ret = bm2835_mmal_init_device(dev, &dev->vdev); -+ if (ret < 0) -+ goto unreg_dev; -+ -+ /* Really want to call vidioc_s_fmt_vid_cap with the default -+ * format, but currently the APIs don't join up. -+ */ -+ ret = mmal_setup_components(dev, &default_v4l2_format); -+ if (ret < 0) { -+ v4l2_err(&dev->v4l2_dev, -+ "%s: could not setup components\n", __func__); -+ goto unreg_dev; -+ } -+ -+ v4l2_info(&dev->v4l2_dev, -+ "Broadcom 2835 MMAL video capture ver %s loaded.\n", -+ BM2835_MMAL_VERSION); -+ -+ gdev[camera] = dev; -+ } -+ return 0; -+ -+unreg_dev: -+ v4l2_ctrl_handler_free(&dev->ctrl_handler); -+ v4l2_device_unregister(&dev->v4l2_dev); -+ -+free_dev: -+ kfree(dev); -+ -+ for ( ; camera > 0; camera--) { -+ bcm2835_cleanup_instance(gdev[camera]); -+ gdev[camera] = NULL; -+ } -+ pr_info("%s: error %d while loading driver\n", -+ BM2835_MMAL_MODULE_NAME, ret); -+ -+ return ret; -+} -+ -+static void __exit bm2835_mmal_exit(void) -+{ -+ int camera; -+ struct vchiq_mmal_instance *instance = gdev[0]->instance; -+ -+ for (camera = 0; camera < MAX_BCM2835_CAMERAS; camera++) { -+ bcm2835_cleanup_instance(gdev[camera]); -+ gdev[camera] = NULL; -+ } -+ vchiq_mmal_finalise(instance); -+} -+ -+module_init(bm2835_mmal_init); -+module_exit(bm2835_mmal_exit); ---- /dev/null -+++ b/drivers/media/platform/bcm2835/bcm2835-camera.h -@@ -0,0 +1,145 @@ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive -+ * for more details. -+ * -+ * Authors: Vincent Sanders -+ * Dave Stevenson -+ * Simon Mellor -+ * Luke Diamand -+ * -+ * core driver device -+ */ -+ -+#define V4L2_CTRL_COUNT 29 /* number of v4l controls */ -+ -+enum { -+ MMAL_COMPONENT_CAMERA = 0, -+ MMAL_COMPONENT_PREVIEW, -+ MMAL_COMPONENT_IMAGE_ENCODE, -+ MMAL_COMPONENT_VIDEO_ENCODE, -+ MMAL_COMPONENT_COUNT -+}; -+ -+enum { -+ MMAL_CAMERA_PORT_PREVIEW = 0, -+ MMAL_CAMERA_PORT_VIDEO, -+ MMAL_CAMERA_PORT_CAPTURE, -+ MMAL_CAMERA_PORT_COUNT -+}; -+ -+#define PREVIEW_LAYER 2 -+ -+extern int bcm2835_v4l2_debug; -+ -+struct bm2835_mmal_dev { -+ /* v4l2 devices */ -+ struct v4l2_device v4l2_dev; -+ struct video_device vdev; -+ struct mutex mutex; -+ -+ /* controls */ -+ struct v4l2_ctrl_handler ctrl_handler; -+ struct v4l2_ctrl *ctrls[V4L2_CTRL_COUNT]; -+ enum v4l2_scene_mode scene_mode; -+ struct mmal_colourfx colourfx; -+ int hflip; -+ int vflip; -+ int red_gain; -+ int blue_gain; -+ enum mmal_parameter_exposuremode exposure_mode_user; -+ enum v4l2_exposure_auto_type exposure_mode_v4l2_user; -+ /* active exposure mode may differ if selected via a scene mode */ -+ enum mmal_parameter_exposuremode exposure_mode_active; -+ enum mmal_parameter_exposuremeteringmode metering_mode; -+ unsigned int manual_shutter_speed; -+ bool exp_auto_priority; -+ bool manual_iso_enabled; -+ uint32_t iso; -+ -+ /* allocated mmal instance and components */ -+ struct vchiq_mmal_instance *instance; -+ struct vchiq_mmal_component *component[MMAL_COMPONENT_COUNT]; -+ int camera_use_count; -+ -+ struct v4l2_window overlay; -+ -+ struct { -+ unsigned int width; /* width */ -+ unsigned int height; /* height */ -+ unsigned int stride; /* stride */ -+ unsigned int buffersize; /* buffer size with padding */ -+ struct mmal_fmt *fmt; -+ struct v4l2_fract timeperframe; -+ -+ /* H264 encode bitrate */ -+ int encode_bitrate; -+ /* H264 bitrate mode. CBR/VBR */ -+ int encode_bitrate_mode; -+ /* H264 profile */ -+ enum v4l2_mpeg_video_h264_profile enc_profile; -+ /* H264 level */ -+ enum v4l2_mpeg_video_h264_level enc_level; -+ /* JPEG Q-factor */ -+ int q_factor; -+ -+ struct vb2_queue vb_vidq; -+ -+ /* VC start timestamp for streaming */ -+ s64 vc_start_timestamp; -+ /* Kernel start timestamp for streaming */ -+ struct timeval kernel_start_ts; -+ -+ struct vchiq_mmal_port *port; /* port being used for capture */ -+ /* camera port being used for capture */ -+ struct vchiq_mmal_port *camera_port; -+ /* component being used for encode */ -+ struct vchiq_mmal_component *encode_component; -+ /* number of frames remaining which driver should capture */ -+ unsigned int frame_count; -+ /* last frame completion */ -+ struct completion frame_cmplt; -+ -+ } capture; -+ -+ unsigned int camera_num; -+ unsigned int max_width; -+ unsigned int max_height; -+ unsigned int rgb_bgr_swapped; -+}; -+ -+int bm2835_mmal_init_controls( -+ struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl_handler *hdl); -+ -+int bm2835_mmal_set_all_camera_controls(struct bm2835_mmal_dev *dev); -+int set_framerate_params(struct bm2835_mmal_dev *dev); -+ -+/* Debug helpers */ -+ -+#define v4l2_dump_pix_format(level, debug, dev, pix_fmt, desc) \ -+{ \ -+ v4l2_dbg(level, debug, dev, \ -+"%s: w %u h %u field %u pfmt 0x%x bpl %u sz_img %u colorspace 0x%x priv %u\n", \ -+ desc == NULL ? "" : desc, \ -+ (pix_fmt)->width, (pix_fmt)->height, (pix_fmt)->field, \ -+ (pix_fmt)->pixelformat, (pix_fmt)->bytesperline, \ -+ (pix_fmt)->sizeimage, (pix_fmt)->colorspace, (pix_fmt)->priv); \ -+} -+#define v4l2_dump_win_format(level, debug, dev, win_fmt, desc) \ -+{ \ -+ v4l2_dbg(level, debug, dev, \ -+"%s: w %u h %u l %u t %u field %u chromakey %06X clip %p " \ -+"clipcount %u bitmap %p\n", \ -+ desc == NULL ? "" : desc, \ -+ (win_fmt)->w.width, (win_fmt)->w.height, \ -+ (win_fmt)->w.left, (win_fmt)->w.top, \ -+ (win_fmt)->field, \ -+ (win_fmt)->chromakey, \ -+ (win_fmt)->clips, (win_fmt)->clipcount, \ -+ (win_fmt)->bitmap); \ -+} ---- /dev/null -+++ b/drivers/media/platform/bcm2835/controls.c -@@ -0,0 +1,1345 @@ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive -+ * for more details. -+ * -+ * Authors: Vincent Sanders -+ * Dave Stevenson -+ * Simon Mellor -+ * Luke Diamand -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "mmal-common.h" -+#include "mmal-vchiq.h" -+#include "mmal-parameters.h" -+#include "bcm2835-camera.h" -+ -+/* The supported V4L2_CID_AUTO_EXPOSURE_BIAS values are from -4.0 to +4.0. -+ * MMAL values are in 1/6th increments so the MMAL range is -24 to +24. -+ * V4L2 docs say value "is expressed in terms of EV, drivers should interpret -+ * the values as 0.001 EV units, where the value 1000 stands for +1 EV." -+ * V4L2 is limited to a max of 32 values in a menu, so count in 1/3rds from -+ * -4 to +4 -+ */ -+static const s64 ev_bias_qmenu[] = { -+ -4000, -3667, -3333, -+ -3000, -2667, -2333, -+ -2000, -1667, -1333, -+ -1000, -667, -333, -+ 0, 333, 667, -+ 1000, 1333, 1667, -+ 2000, 2333, 2667, -+ 3000, 3333, 3667, -+ 4000 -+}; -+ -+/* Supported ISO values (*1000) -+ * ISOO = auto ISO -+ */ -+static const s64 iso_qmenu[] = { -+ 0, 100000, 200000, 400000, 800000, -+}; -+static const uint32_t iso_values[] = { -+ 0, 100, 200, 400, 800, -+}; -+ -+static const s64 mains_freq_qmenu[] = { -+ V4L2_CID_POWER_LINE_FREQUENCY_DISABLED, -+ V4L2_CID_POWER_LINE_FREQUENCY_50HZ, -+ V4L2_CID_POWER_LINE_FREQUENCY_60HZ, -+ V4L2_CID_POWER_LINE_FREQUENCY_AUTO -+}; -+ -+/* Supported video encode modes */ -+static const s64 bitrate_mode_qmenu[] = { -+ (s64)V4L2_MPEG_VIDEO_BITRATE_MODE_VBR, -+ (s64)V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, -+}; -+ -+enum bm2835_mmal_ctrl_type { -+ MMAL_CONTROL_TYPE_STD, -+ MMAL_CONTROL_TYPE_STD_MENU, -+ MMAL_CONTROL_TYPE_INT_MENU, -+ MMAL_CONTROL_TYPE_CLUSTER, /* special cluster entry */ -+}; -+ -+struct bm2835_mmal_v4l2_ctrl; -+ -+typedef int(bm2835_mmal_v4l2_ctrl_cb)( -+ struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl); -+ -+struct bm2835_mmal_v4l2_ctrl { -+ u32 id; /* v4l2 control identifier */ -+ enum bm2835_mmal_ctrl_type type; -+ /* control minimum value or -+ * mask for MMAL_CONTROL_TYPE_STD_MENU */ -+ s32 min; -+ s32 max; /* maximum value of control */ -+ s32 def; /* default value of control */ -+ s32 step; /* step size of the control */ -+ const s64 *imenu; /* integer menu array */ -+ u32 mmal_id; /* mmal parameter id */ -+ bm2835_mmal_v4l2_ctrl_cb *setter; -+ bool ignore_errors; -+}; -+ -+struct v4l2_to_mmal_effects_setting { -+ u32 v4l2_effect; -+ u32 mmal_effect; -+ s32 col_fx_enable; -+ s32 col_fx_fixed_cbcr; -+ u32 u; -+ u32 v; -+ u32 num_effect_params; -+ u32 effect_params[MMAL_MAX_IMAGEFX_PARAMETERS]; -+}; -+ -+static const struct v4l2_to_mmal_effects_setting -+ v4l2_to_mmal_effects_values[] = { -+ { V4L2_COLORFX_NONE, MMAL_PARAM_IMAGEFX_NONE, -+ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, -+ { V4L2_COLORFX_BW, MMAL_PARAM_IMAGEFX_NONE, -+ 1, 0, 128, 128, 0, {0, 0, 0, 0, 0} }, -+ { V4L2_COLORFX_SEPIA, MMAL_PARAM_IMAGEFX_NONE, -+ 1, 0, 87, 151, 0, {0, 0, 0, 0, 0} }, -+ { V4L2_COLORFX_NEGATIVE, MMAL_PARAM_IMAGEFX_NEGATIVE, -+ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, -+ { V4L2_COLORFX_EMBOSS, MMAL_PARAM_IMAGEFX_EMBOSS, -+ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, -+ { V4L2_COLORFX_SKETCH, MMAL_PARAM_IMAGEFX_SKETCH, -+ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, -+ { V4L2_COLORFX_SKY_BLUE, MMAL_PARAM_IMAGEFX_PASTEL, -+ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, -+ { V4L2_COLORFX_GRASS_GREEN, MMAL_PARAM_IMAGEFX_WATERCOLOUR, -+ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, -+ { V4L2_COLORFX_SKIN_WHITEN, MMAL_PARAM_IMAGEFX_WASHEDOUT, -+ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, -+ { V4L2_COLORFX_VIVID, MMAL_PARAM_IMAGEFX_SATURATION, -+ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, -+ { V4L2_COLORFX_AQUA, MMAL_PARAM_IMAGEFX_NONE, -+ 1, 0, 171, 121, 0, {0, 0, 0, 0, 0} }, -+ { V4L2_COLORFX_ART_FREEZE, MMAL_PARAM_IMAGEFX_HATCH, -+ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, -+ { V4L2_COLORFX_SILHOUETTE, MMAL_PARAM_IMAGEFX_FILM, -+ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, -+ { V4L2_COLORFX_SOLARIZATION, MMAL_PARAM_IMAGEFX_SOLARIZE, -+ 0, 0, 0, 0, 5, {1, 128, 160, 160, 48} }, -+ { V4L2_COLORFX_ANTIQUE, MMAL_PARAM_IMAGEFX_COLOURBALANCE, -+ 0, 0, 0, 0, 3, {108, 274, 238, 0, 0} }, -+ { V4L2_COLORFX_SET_CBCR, MMAL_PARAM_IMAGEFX_NONE, -+ 1, 1, 0, 0, 0, {0, 0, 0, 0, 0} } -+}; -+ -+struct v4l2_mmal_scene_config { -+ enum v4l2_scene_mode v4l2_scene; -+ enum mmal_parameter_exposuremode exposure_mode; -+ enum mmal_parameter_exposuremeteringmode metering_mode; -+}; -+ -+static const struct v4l2_mmal_scene_config scene_configs[] = { -+ /* V4L2_SCENE_MODE_NONE automatically added */ -+ { -+ V4L2_SCENE_MODE_NIGHT, -+ MMAL_PARAM_EXPOSUREMODE_NIGHT, -+ MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE -+ }, -+ { -+ V4L2_SCENE_MODE_SPORTS, -+ MMAL_PARAM_EXPOSUREMODE_SPORTS, -+ MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE -+ }, -+}; -+ -+/* control handlers*/ -+ -+static int ctrl_set_rational(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ struct mmal_parameter_rational rational_value; -+ struct vchiq_mmal_port *control; -+ -+ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ -+ rational_value.num = ctrl->val; -+ rational_value.den = 100; -+ -+ return vchiq_mmal_port_parameter_set(dev->instance, control, -+ mmal_ctrl->mmal_id, -+ &rational_value, -+ sizeof(rational_value)); -+} -+ -+static int ctrl_set_value(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ u32 u32_value; -+ struct vchiq_mmal_port *control; -+ -+ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ -+ u32_value = ctrl->val; -+ -+ return vchiq_mmal_port_parameter_set(dev->instance, control, -+ mmal_ctrl->mmal_id, -+ &u32_value, sizeof(u32_value)); -+} -+ -+static int ctrl_set_iso(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ u32 u32_value; -+ struct vchiq_mmal_port *control; -+ -+ if (ctrl->val > mmal_ctrl->max || ctrl->val < mmal_ctrl->min) -+ return 1; -+ -+ if (ctrl->id == V4L2_CID_ISO_SENSITIVITY) -+ dev->iso = iso_values[ctrl->val]; -+ else if (ctrl->id == V4L2_CID_ISO_SENSITIVITY_AUTO) -+ dev->manual_iso_enabled = -+ (ctrl->val == V4L2_ISO_SENSITIVITY_MANUAL ? -+ true : -+ false); -+ -+ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ -+ if (dev->manual_iso_enabled) -+ u32_value = dev->iso; -+ else -+ u32_value = 0; -+ -+ return vchiq_mmal_port_parameter_set(dev->instance, control, -+ MMAL_PARAMETER_ISO, -+ &u32_value, sizeof(u32_value)); -+} -+ -+static int ctrl_set_value_ev(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ s32 s32_value; -+ struct vchiq_mmal_port *control; -+ -+ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ -+ s32_value = (ctrl->val-12)*2; /* Convert from index to 1/6ths */ -+ -+ return vchiq_mmal_port_parameter_set(dev->instance, control, -+ mmal_ctrl->mmal_id, -+ &s32_value, sizeof(s32_value)); -+} -+ -+static int ctrl_set_rotate(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ int ret; -+ u32 u32_value; -+ struct vchiq_mmal_component *camera; -+ -+ camera = dev->component[MMAL_COMPONENT_CAMERA]; -+ -+ u32_value = ((ctrl->val % 360) / 90) * 90; -+ -+ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[0], -+ mmal_ctrl->mmal_id, -+ &u32_value, sizeof(u32_value)); -+ if (ret < 0) -+ return ret; -+ -+ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[1], -+ mmal_ctrl->mmal_id, -+ &u32_value, sizeof(u32_value)); -+ if (ret < 0) -+ return ret; -+ -+ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[2], -+ mmal_ctrl->mmal_id, -+ &u32_value, sizeof(u32_value)); -+ -+ return ret; -+} -+ -+static int ctrl_set_flip(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ int ret; -+ u32 u32_value; -+ struct vchiq_mmal_component *camera; -+ -+ if (ctrl->id == V4L2_CID_HFLIP) -+ dev->hflip = ctrl->val; -+ else -+ dev->vflip = ctrl->val; -+ -+ camera = dev->component[MMAL_COMPONENT_CAMERA]; -+ -+ if (dev->hflip && dev->vflip) -+ u32_value = MMAL_PARAM_MIRROR_BOTH; -+ else if (dev->hflip) -+ u32_value = MMAL_PARAM_MIRROR_HORIZONTAL; -+ else if (dev->vflip) -+ u32_value = MMAL_PARAM_MIRROR_VERTICAL; -+ else -+ u32_value = MMAL_PARAM_MIRROR_NONE; -+ -+ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[0], -+ mmal_ctrl->mmal_id, -+ &u32_value, sizeof(u32_value)); -+ if (ret < 0) -+ return ret; -+ -+ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[1], -+ mmal_ctrl->mmal_id, -+ &u32_value, sizeof(u32_value)); -+ if (ret < 0) -+ return ret; -+ -+ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[2], -+ mmal_ctrl->mmal_id, -+ &u32_value, sizeof(u32_value)); -+ -+ return ret; -+ -+} -+ -+static int ctrl_set_exposure(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ enum mmal_parameter_exposuremode exp_mode = dev->exposure_mode_user; -+ u32 shutter_speed = 0; -+ struct vchiq_mmal_port *control; -+ int ret = 0; -+ -+ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ -+ if (mmal_ctrl->mmal_id == MMAL_PARAMETER_SHUTTER_SPEED) { -+ /* V4L2 is in 100usec increments. -+ * MMAL is 1usec. -+ */ -+ dev->manual_shutter_speed = ctrl->val * 100; -+ } else if (mmal_ctrl->mmal_id == MMAL_PARAMETER_EXPOSURE_MODE) { -+ switch (ctrl->val) { -+ case V4L2_EXPOSURE_AUTO: -+ exp_mode = MMAL_PARAM_EXPOSUREMODE_AUTO; -+ break; -+ -+ case V4L2_EXPOSURE_MANUAL: -+ exp_mode = MMAL_PARAM_EXPOSUREMODE_OFF; -+ break; -+ } -+ dev->exposure_mode_user = exp_mode; -+ dev->exposure_mode_v4l2_user = ctrl->val; -+ } else if (mmal_ctrl->id == V4L2_CID_EXPOSURE_AUTO_PRIORITY) { -+ dev->exp_auto_priority = ctrl->val; -+ } -+ -+ if (dev->scene_mode == V4L2_SCENE_MODE_NONE) { -+ if (exp_mode == MMAL_PARAM_EXPOSUREMODE_OFF) -+ shutter_speed = dev->manual_shutter_speed; -+ -+ ret = vchiq_mmal_port_parameter_set(dev->instance, -+ control, -+ MMAL_PARAMETER_SHUTTER_SPEED, -+ &shutter_speed, -+ sizeof(shutter_speed)); -+ ret += vchiq_mmal_port_parameter_set(dev->instance, -+ control, -+ MMAL_PARAMETER_EXPOSURE_MODE, -+ &exp_mode, -+ sizeof(u32)); -+ dev->exposure_mode_active = exp_mode; -+ } -+ /* exposure_dynamic_framerate (V4L2_CID_EXPOSURE_AUTO_PRIORITY) should -+ * always apply irrespective of scene mode. -+ */ -+ ret += set_framerate_params(dev); -+ -+ return ret; -+} -+ -+static int ctrl_set_metering_mode(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ switch (ctrl->val) { -+ case V4L2_EXPOSURE_METERING_AVERAGE: -+ dev->metering_mode = MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE; -+ break; -+ -+ case V4L2_EXPOSURE_METERING_CENTER_WEIGHTED: -+ dev->metering_mode = MMAL_PARAM_EXPOSUREMETERINGMODE_BACKLIT; -+ break; -+ -+ case V4L2_EXPOSURE_METERING_SPOT: -+ dev->metering_mode = MMAL_PARAM_EXPOSUREMETERINGMODE_SPOT; -+ break; -+ -+ /* todo matrix weighting not added to Linux API till 3.9 -+ case V4L2_EXPOSURE_METERING_MATRIX: -+ dev->metering_mode = MMAL_PARAM_EXPOSUREMETERINGMODE_MATRIX; -+ break; -+ */ -+ -+ } -+ -+ if (dev->scene_mode == V4L2_SCENE_MODE_NONE) { -+ struct vchiq_mmal_port *control; -+ u32 u32_value = dev->metering_mode; -+ -+ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ -+ return vchiq_mmal_port_parameter_set(dev->instance, control, -+ mmal_ctrl->mmal_id, -+ &u32_value, sizeof(u32_value)); -+ } else -+ return 0; -+} -+ -+static int ctrl_set_flicker_avoidance(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ u32 u32_value; -+ struct vchiq_mmal_port *control; -+ -+ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ -+ switch (ctrl->val) { -+ case V4L2_CID_POWER_LINE_FREQUENCY_DISABLED: -+ u32_value = MMAL_PARAM_FLICKERAVOID_OFF; -+ break; -+ case V4L2_CID_POWER_LINE_FREQUENCY_50HZ: -+ u32_value = MMAL_PARAM_FLICKERAVOID_50HZ; -+ break; -+ case V4L2_CID_POWER_LINE_FREQUENCY_60HZ: -+ u32_value = MMAL_PARAM_FLICKERAVOID_60HZ; -+ break; -+ case V4L2_CID_POWER_LINE_FREQUENCY_AUTO: -+ u32_value = MMAL_PARAM_FLICKERAVOID_AUTO; -+ break; -+ } -+ -+ return vchiq_mmal_port_parameter_set(dev->instance, control, -+ mmal_ctrl->mmal_id, -+ &u32_value, sizeof(u32_value)); -+} -+ -+static int ctrl_set_awb_mode(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ u32 u32_value; -+ struct vchiq_mmal_port *control; -+ -+ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ -+ switch (ctrl->val) { -+ case V4L2_WHITE_BALANCE_MANUAL: -+ u32_value = MMAL_PARAM_AWBMODE_OFF; -+ break; -+ -+ case V4L2_WHITE_BALANCE_AUTO: -+ u32_value = MMAL_PARAM_AWBMODE_AUTO; -+ break; -+ -+ case V4L2_WHITE_BALANCE_INCANDESCENT: -+ u32_value = MMAL_PARAM_AWBMODE_INCANDESCENT; -+ break; -+ -+ case V4L2_WHITE_BALANCE_FLUORESCENT: -+ u32_value = MMAL_PARAM_AWBMODE_FLUORESCENT; -+ break; -+ -+ case V4L2_WHITE_BALANCE_FLUORESCENT_H: -+ u32_value = MMAL_PARAM_AWBMODE_TUNGSTEN; -+ break; -+ -+ case V4L2_WHITE_BALANCE_HORIZON: -+ u32_value = MMAL_PARAM_AWBMODE_HORIZON; -+ break; -+ -+ case V4L2_WHITE_BALANCE_DAYLIGHT: -+ u32_value = MMAL_PARAM_AWBMODE_SUNLIGHT; -+ break; -+ -+ case V4L2_WHITE_BALANCE_FLASH: -+ u32_value = MMAL_PARAM_AWBMODE_FLASH; -+ break; -+ -+ case V4L2_WHITE_BALANCE_CLOUDY: -+ u32_value = MMAL_PARAM_AWBMODE_CLOUDY; -+ break; -+ -+ case V4L2_WHITE_BALANCE_SHADE: -+ u32_value = MMAL_PARAM_AWBMODE_SHADE; -+ break; -+ -+ } -+ -+ return vchiq_mmal_port_parameter_set(dev->instance, control, -+ mmal_ctrl->mmal_id, -+ &u32_value, sizeof(u32_value)); -+} -+ -+static int ctrl_set_awb_gains(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ struct vchiq_mmal_port *control; -+ struct mmal_parameter_awbgains gains; -+ -+ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ -+ if (ctrl->id == V4L2_CID_RED_BALANCE) -+ dev->red_gain = ctrl->val; -+ else if (ctrl->id == V4L2_CID_BLUE_BALANCE) -+ dev->blue_gain = ctrl->val; -+ -+ gains.r_gain.num = dev->red_gain; -+ gains.b_gain.num = dev->blue_gain; -+ gains.r_gain.den = gains.b_gain.den = 1000; -+ -+ return vchiq_mmal_port_parameter_set(dev->instance, control, -+ mmal_ctrl->mmal_id, -+ &gains, sizeof(gains)); -+} -+ -+static int ctrl_set_image_effect(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ int ret = -EINVAL; -+ int i, j; -+ struct vchiq_mmal_port *control; -+ struct mmal_parameter_imagefx_parameters imagefx; -+ -+ for (i = 0; i < ARRAY_SIZE(v4l2_to_mmal_effects_values); i++) { -+ if (ctrl->val == v4l2_to_mmal_effects_values[i].v4l2_effect) { -+ -+ imagefx.effect = -+ v4l2_to_mmal_effects_values[i].mmal_effect; -+ imagefx.num_effect_params = -+ v4l2_to_mmal_effects_values[i].num_effect_params; -+ -+ if (imagefx.num_effect_params > MMAL_MAX_IMAGEFX_PARAMETERS) -+ imagefx.num_effect_params = MMAL_MAX_IMAGEFX_PARAMETERS; -+ -+ for (j = 0; j < imagefx.num_effect_params; j++) -+ imagefx.effect_parameter[j] = -+ v4l2_to_mmal_effects_values[i].effect_params[j]; -+ -+ dev->colourfx.enable = -+ v4l2_to_mmal_effects_values[i].col_fx_enable; -+ if (!v4l2_to_mmal_effects_values[i].col_fx_fixed_cbcr) { -+ dev->colourfx.u = -+ v4l2_to_mmal_effects_values[i].u; -+ dev->colourfx.v = -+ v4l2_to_mmal_effects_values[i].v; -+ } -+ -+ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ -+ ret = vchiq_mmal_port_parameter_set( -+ dev->instance, control, -+ MMAL_PARAMETER_IMAGE_EFFECT_PARAMETERS, -+ &imagefx, sizeof(imagefx)); -+ if (ret) -+ goto exit; -+ -+ ret = vchiq_mmal_port_parameter_set( -+ dev->instance, control, -+ MMAL_PARAMETER_COLOUR_EFFECT, -+ &dev->colourfx, sizeof(dev->colourfx)); -+ } -+ } -+ -+exit: -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "mmal_ctrl:%p ctrl id:0x%x ctrl val:%d imagefx:0x%x color_effect:%s u:%d v:%d ret %d(%d)\n", -+ mmal_ctrl, ctrl->id, ctrl->val, imagefx.effect, -+ dev->colourfx.enable ? "true" : "false", -+ dev->colourfx.u, dev->colourfx.v, -+ ret, (ret == 0 ? 0 : -EINVAL)); -+ return (ret == 0 ? 0 : EINVAL); -+} -+ -+static int ctrl_set_colfx(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ int ret = -EINVAL; -+ struct vchiq_mmal_port *control; -+ -+ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ -+ dev->colourfx.enable = (ctrl->val & 0xff00) >> 8; -+ dev->colourfx.enable = ctrl->val & 0xff; -+ -+ ret = vchiq_mmal_port_parameter_set(dev->instance, control, -+ MMAL_PARAMETER_COLOUR_EFFECT, -+ &dev->colourfx, sizeof(dev->colourfx)); -+ -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "%s: After: mmal_ctrl:%p ctrl id:0x%x ctrl val:%d ret %d(%d)\n", -+ __func__, mmal_ctrl, ctrl->id, ctrl->val, ret, -+ (ret == 0 ? 0 : -EINVAL)); -+ return (ret == 0 ? 0 : EINVAL); -+} -+ -+static int ctrl_set_bitrate(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ int ret; -+ struct vchiq_mmal_port *encoder_out; -+ -+ dev->capture.encode_bitrate = ctrl->val; -+ -+ encoder_out = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; -+ -+ ret = vchiq_mmal_port_parameter_set(dev->instance, encoder_out, -+ mmal_ctrl->mmal_id, -+ &ctrl->val, sizeof(ctrl->val)); -+ ret = 0; -+ return ret; -+} -+ -+static int ctrl_set_bitrate_mode(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ u32 bitrate_mode; -+ struct vchiq_mmal_port *encoder_out; -+ -+ encoder_out = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; -+ -+ dev->capture.encode_bitrate_mode = ctrl->val; -+ switch (ctrl->val) { -+ default: -+ case V4L2_MPEG_VIDEO_BITRATE_MODE_VBR: -+ bitrate_mode = MMAL_VIDEO_RATECONTROL_VARIABLE; -+ break; -+ case V4L2_MPEG_VIDEO_BITRATE_MODE_CBR: -+ bitrate_mode = MMAL_VIDEO_RATECONTROL_CONSTANT; -+ break; -+ } -+ -+ vchiq_mmal_port_parameter_set(dev->instance, encoder_out, -+ mmal_ctrl->mmal_id, -+ &bitrate_mode, -+ sizeof(bitrate_mode)); -+ return 0; -+} -+ -+static int ctrl_set_image_encode_output(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ u32 u32_value; -+ struct vchiq_mmal_port *jpeg_out; -+ -+ jpeg_out = &dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->output[0]; -+ -+ u32_value = ctrl->val; -+ -+ return vchiq_mmal_port_parameter_set(dev->instance, jpeg_out, -+ mmal_ctrl->mmal_id, -+ &u32_value, sizeof(u32_value)); -+} -+ -+static int ctrl_set_video_encode_param_output(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ u32 u32_value; -+ struct vchiq_mmal_port *vid_enc_ctl; -+ -+ vid_enc_ctl = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; -+ -+ u32_value = ctrl->val; -+ -+ return vchiq_mmal_port_parameter_set(dev->instance, vid_enc_ctl, -+ mmal_ctrl->mmal_id, -+ &u32_value, sizeof(u32_value)); -+} -+ -+static int ctrl_set_video_encode_profile_level(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ struct mmal_parameter_video_profile param; -+ int ret = 0; -+ -+ if (ctrl->id == V4L2_CID_MPEG_VIDEO_H264_PROFILE) { -+ switch (ctrl->val) { -+ case V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE: -+ case V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE: -+ case V4L2_MPEG_VIDEO_H264_PROFILE_MAIN: -+ case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH: -+ dev->capture.enc_profile = ctrl->val; -+ break; -+ default: -+ ret = -EINVAL; -+ break; -+ } -+ } else if (ctrl->id == V4L2_CID_MPEG_VIDEO_H264_LEVEL) { -+ switch (ctrl->val) { -+ case V4L2_MPEG_VIDEO_H264_LEVEL_1_0: -+ case V4L2_MPEG_VIDEO_H264_LEVEL_1B: -+ case V4L2_MPEG_VIDEO_H264_LEVEL_1_1: -+ case V4L2_MPEG_VIDEO_H264_LEVEL_1_2: -+ case V4L2_MPEG_VIDEO_H264_LEVEL_1_3: -+ case V4L2_MPEG_VIDEO_H264_LEVEL_2_0: -+ case V4L2_MPEG_VIDEO_H264_LEVEL_2_1: -+ case V4L2_MPEG_VIDEO_H264_LEVEL_2_2: -+ case V4L2_MPEG_VIDEO_H264_LEVEL_3_0: -+ case V4L2_MPEG_VIDEO_H264_LEVEL_3_1: -+ case V4L2_MPEG_VIDEO_H264_LEVEL_3_2: -+ case V4L2_MPEG_VIDEO_H264_LEVEL_4_0: -+ dev->capture.enc_level = ctrl->val; -+ break; -+ default: -+ ret = -EINVAL; -+ break; -+ } -+ } -+ -+ if (!ret) { -+ switch (dev->capture.enc_profile) { -+ case V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE: -+ param.profile = MMAL_VIDEO_PROFILE_H264_BASELINE; -+ break; -+ case V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE: -+ param.profile = -+ MMAL_VIDEO_PROFILE_H264_CONSTRAINED_BASELINE; -+ break; -+ case V4L2_MPEG_VIDEO_H264_PROFILE_MAIN: -+ param.profile = MMAL_VIDEO_PROFILE_H264_MAIN; -+ break; -+ case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH: -+ param.profile = MMAL_VIDEO_PROFILE_H264_HIGH; -+ break; -+ default: -+ /* Should never get here */ -+ break; -+ } -+ -+ switch (dev->capture.enc_level) { -+ case V4L2_MPEG_VIDEO_H264_LEVEL_1_0: -+ param.level = MMAL_VIDEO_LEVEL_H264_1; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_1B: -+ param.level = MMAL_VIDEO_LEVEL_H264_1b; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_1_1: -+ param.level = MMAL_VIDEO_LEVEL_H264_11; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_1_2: -+ param.level = MMAL_VIDEO_LEVEL_H264_12; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_1_3: -+ param.level = MMAL_VIDEO_LEVEL_H264_13; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_2_0: -+ param.level = MMAL_VIDEO_LEVEL_H264_2; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_2_1: -+ param.level = MMAL_VIDEO_LEVEL_H264_21; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_2_2: -+ param.level = MMAL_VIDEO_LEVEL_H264_22; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_3_0: -+ param.level = MMAL_VIDEO_LEVEL_H264_3; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_3_1: -+ param.level = MMAL_VIDEO_LEVEL_H264_31; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_3_2: -+ param.level = MMAL_VIDEO_LEVEL_H264_32; -+ break; -+ case V4L2_MPEG_VIDEO_H264_LEVEL_4_0: -+ param.level = MMAL_VIDEO_LEVEL_H264_4; -+ break; -+ default: -+ /* Should never get here */ -+ break; -+ } -+ -+ ret = vchiq_mmal_port_parameter_set(dev->instance, -+ &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0], -+ mmal_ctrl->mmal_id, -+ ¶m, sizeof(param)); -+ } -+ return ret; -+} -+ -+static int ctrl_set_scene_mode(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl *ctrl, -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) -+{ -+ int ret = 0; -+ int shutter_speed; -+ struct vchiq_mmal_port *control; -+ -+ v4l2_dbg(0, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "scene mode selected %d, was %d\n", ctrl->val, -+ dev->scene_mode); -+ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; -+ -+ if (ctrl->val == dev->scene_mode) -+ return 0; -+ -+ if (ctrl->val == V4L2_SCENE_MODE_NONE) { -+ /* Restore all user selections */ -+ dev->scene_mode = V4L2_SCENE_MODE_NONE; -+ -+ if (dev->exposure_mode_user == MMAL_PARAM_EXPOSUREMODE_OFF) -+ shutter_speed = dev->manual_shutter_speed; -+ else -+ shutter_speed = 0; -+ -+ v4l2_dbg(0, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "%s: scene mode none: shut_speed %d, exp_mode %d, metering %d\n", -+ __func__, shutter_speed, dev->exposure_mode_user, -+ dev->metering_mode); -+ ret = vchiq_mmal_port_parameter_set(dev->instance, -+ control, -+ MMAL_PARAMETER_SHUTTER_SPEED, -+ &shutter_speed, -+ sizeof(shutter_speed)); -+ ret += vchiq_mmal_port_parameter_set(dev->instance, -+ control, -+ MMAL_PARAMETER_EXPOSURE_MODE, -+ &dev->exposure_mode_user, -+ sizeof(u32)); -+ dev->exposure_mode_active = dev->exposure_mode_user; -+ ret += vchiq_mmal_port_parameter_set(dev->instance, -+ control, -+ MMAL_PARAMETER_EXP_METERING_MODE, -+ &dev->metering_mode, -+ sizeof(u32)); -+ ret += set_framerate_params(dev); -+ } else { -+ /* Set up scene mode */ -+ int i; -+ const struct v4l2_mmal_scene_config *scene = NULL; -+ int shutter_speed; -+ enum mmal_parameter_exposuremode exposure_mode; -+ enum mmal_parameter_exposuremeteringmode metering_mode; -+ -+ for (i = 0; i < ARRAY_SIZE(scene_configs); i++) { -+ if (scene_configs[i].v4l2_scene == -+ ctrl->val) { -+ scene = &scene_configs[i]; -+ break; -+ } -+ } -+ if (!scene) -+ return -EINVAL; -+ if (i >= ARRAY_SIZE(scene_configs)) -+ return -EINVAL; -+ -+ /* Set all the values */ -+ dev->scene_mode = ctrl->val; -+ -+ if (scene->exposure_mode == MMAL_PARAM_EXPOSUREMODE_OFF) -+ shutter_speed = dev->manual_shutter_speed; -+ else -+ shutter_speed = 0; -+ exposure_mode = scene->exposure_mode; -+ metering_mode = scene->metering_mode; -+ -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "%s: scene mode none: shut_speed %d, exp_mode %d, metering %d\n", -+ __func__, shutter_speed, exposure_mode, metering_mode); -+ -+ ret = vchiq_mmal_port_parameter_set(dev->instance, control, -+ MMAL_PARAMETER_SHUTTER_SPEED, -+ &shutter_speed, -+ sizeof(shutter_speed)); -+ ret += vchiq_mmal_port_parameter_set(dev->instance, -+ control, -+ MMAL_PARAMETER_EXPOSURE_MODE, -+ &exposure_mode, -+ sizeof(u32)); -+ dev->exposure_mode_active = exposure_mode; -+ ret += vchiq_mmal_port_parameter_set(dev->instance, control, -+ MMAL_PARAMETER_EXPOSURE_MODE, -+ &exposure_mode, -+ sizeof(u32)); -+ ret += vchiq_mmal_port_parameter_set(dev->instance, control, -+ MMAL_PARAMETER_EXP_METERING_MODE, -+ &metering_mode, -+ sizeof(u32)); -+ ret += set_framerate_params(dev); -+ } -+ if (ret) { -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "%s: Setting scene to %d, ret=%d\n", -+ __func__, ctrl->val, ret); -+ ret = -EINVAL; -+ } -+ return 0; -+} -+ -+static int bm2835_mmal_s_ctrl(struct v4l2_ctrl *ctrl) -+{ -+ struct bm2835_mmal_dev *dev = -+ container_of(ctrl->handler, struct bm2835_mmal_dev, -+ ctrl_handler); -+ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl = ctrl->priv; -+ int ret; -+ -+ if ((mmal_ctrl == NULL) || -+ (mmal_ctrl->id != ctrl->id) || -+ (mmal_ctrl->setter == NULL)) { -+ pr_warn("mmal_ctrl:%p ctrl id:%d\n", mmal_ctrl, ctrl->id); -+ return -EINVAL; -+ } -+ -+ ret = mmal_ctrl->setter(dev, ctrl, mmal_ctrl); -+ if (ret) -+ pr_warn("ctrl id:%d/MMAL param %08X- returned ret %d\n", -+ ctrl->id, mmal_ctrl->mmal_id, ret); -+ if (mmal_ctrl->ignore_errors) -+ ret = 0; -+ return ret; -+} -+ -+static const struct v4l2_ctrl_ops bm2835_mmal_ctrl_ops = { -+ .s_ctrl = bm2835_mmal_s_ctrl, -+}; -+ -+ -+ -+static const struct bm2835_mmal_v4l2_ctrl v4l2_ctrls[V4L2_CTRL_COUNT] = { -+ { -+ V4L2_CID_SATURATION, MMAL_CONTROL_TYPE_STD, -+ -100, 100, 0, 1, NULL, -+ MMAL_PARAMETER_SATURATION, -+ &ctrl_set_rational, -+ false -+ }, -+ { -+ V4L2_CID_SHARPNESS, MMAL_CONTROL_TYPE_STD, -+ -100, 100, 0, 1, NULL, -+ MMAL_PARAMETER_SHARPNESS, -+ &ctrl_set_rational, -+ false -+ }, -+ { -+ V4L2_CID_CONTRAST, MMAL_CONTROL_TYPE_STD, -+ -100, 100, 0, 1, NULL, -+ MMAL_PARAMETER_CONTRAST, -+ &ctrl_set_rational, -+ false -+ }, -+ { -+ V4L2_CID_BRIGHTNESS, MMAL_CONTROL_TYPE_STD, -+ 0, 100, 50, 1, NULL, -+ MMAL_PARAMETER_BRIGHTNESS, -+ &ctrl_set_rational, -+ false -+ }, -+ { -+ V4L2_CID_ISO_SENSITIVITY, MMAL_CONTROL_TYPE_INT_MENU, -+ 0, ARRAY_SIZE(iso_qmenu) - 1, 0, 1, iso_qmenu, -+ MMAL_PARAMETER_ISO, -+ &ctrl_set_iso, -+ false -+ }, -+ { -+ V4L2_CID_ISO_SENSITIVITY_AUTO, MMAL_CONTROL_TYPE_STD_MENU, -+ 0, 1, V4L2_ISO_SENSITIVITY_AUTO, 1, NULL, -+ MMAL_PARAMETER_ISO, -+ &ctrl_set_iso, -+ false -+ }, -+ { -+ V4L2_CID_IMAGE_STABILIZATION, MMAL_CONTROL_TYPE_STD, -+ 0, 1, 0, 1, NULL, -+ MMAL_PARAMETER_VIDEO_STABILISATION, -+ &ctrl_set_value, -+ false -+ }, -+/* { -+ 0, MMAL_CONTROL_TYPE_CLUSTER, 3, 1, 0, NULL, 0, NULL -+ }, */ -+ { -+ V4L2_CID_EXPOSURE_AUTO, MMAL_CONTROL_TYPE_STD_MENU, -+ ~0x03, 3, V4L2_EXPOSURE_AUTO, 0, NULL, -+ MMAL_PARAMETER_EXPOSURE_MODE, -+ &ctrl_set_exposure, -+ false -+ }, -+/* todo this needs mixing in with set exposure -+ { -+ V4L2_CID_SCENE_MODE, MMAL_CONTROL_TYPE_STD_MENU, -+ }, -+ */ -+ { -+ V4L2_CID_EXPOSURE_ABSOLUTE, MMAL_CONTROL_TYPE_STD, -+ /* Units of 100usecs */ -+ 1, 1*1000*10, 100*10, 1, NULL, -+ MMAL_PARAMETER_SHUTTER_SPEED, -+ &ctrl_set_exposure, -+ false -+ }, -+ { -+ V4L2_CID_AUTO_EXPOSURE_BIAS, MMAL_CONTROL_TYPE_INT_MENU, -+ 0, ARRAY_SIZE(ev_bias_qmenu) - 1, -+ (ARRAY_SIZE(ev_bias_qmenu)+1)/2 - 1, 0, ev_bias_qmenu, -+ MMAL_PARAMETER_EXPOSURE_COMP, -+ &ctrl_set_value_ev, -+ false -+ }, -+ { -+ V4L2_CID_EXPOSURE_AUTO_PRIORITY, MMAL_CONTROL_TYPE_STD, -+ 0, 1, -+ 0, 1, NULL, -+ 0, /* Dummy MMAL ID as it gets mapped into FPS range*/ -+ &ctrl_set_exposure, -+ false -+ }, -+ { -+ V4L2_CID_EXPOSURE_METERING, -+ MMAL_CONTROL_TYPE_STD_MENU, -+ ~0x7, 2, V4L2_EXPOSURE_METERING_AVERAGE, 0, NULL, -+ MMAL_PARAMETER_EXP_METERING_MODE, -+ &ctrl_set_metering_mode, -+ false -+ }, -+ { -+ V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE, -+ MMAL_CONTROL_TYPE_STD_MENU, -+ ~0x3ff, 9, V4L2_WHITE_BALANCE_AUTO, 0, NULL, -+ MMAL_PARAMETER_AWB_MODE, -+ &ctrl_set_awb_mode, -+ false -+ }, -+ { -+ V4L2_CID_RED_BALANCE, MMAL_CONTROL_TYPE_STD, -+ 1, 7999, 1000, 1, NULL, -+ MMAL_PARAMETER_CUSTOM_AWB_GAINS, -+ &ctrl_set_awb_gains, -+ false -+ }, -+ { -+ V4L2_CID_BLUE_BALANCE, MMAL_CONTROL_TYPE_STD, -+ 1, 7999, 1000, 1, NULL, -+ MMAL_PARAMETER_CUSTOM_AWB_GAINS, -+ &ctrl_set_awb_gains, -+ false -+ }, -+ { -+ V4L2_CID_COLORFX, MMAL_CONTROL_TYPE_STD_MENU, -+ 0, 15, V4L2_COLORFX_NONE, 0, NULL, -+ MMAL_PARAMETER_IMAGE_EFFECT, -+ &ctrl_set_image_effect, -+ false -+ }, -+ { -+ V4L2_CID_COLORFX_CBCR, MMAL_CONTROL_TYPE_STD, -+ 0, 0xffff, 0x8080, 1, NULL, -+ MMAL_PARAMETER_COLOUR_EFFECT, -+ &ctrl_set_colfx, -+ false -+ }, -+ { -+ V4L2_CID_ROTATE, MMAL_CONTROL_TYPE_STD, -+ 0, 360, 0, 90, NULL, -+ MMAL_PARAMETER_ROTATION, -+ &ctrl_set_rotate, -+ false -+ }, -+ { -+ V4L2_CID_HFLIP, MMAL_CONTROL_TYPE_STD, -+ 0, 1, 0, 1, NULL, -+ MMAL_PARAMETER_MIRROR, -+ &ctrl_set_flip, -+ false -+ }, -+ { -+ V4L2_CID_VFLIP, MMAL_CONTROL_TYPE_STD, -+ 0, 1, 0, 1, NULL, -+ MMAL_PARAMETER_MIRROR, -+ &ctrl_set_flip, -+ false -+ }, -+ { -+ V4L2_CID_MPEG_VIDEO_BITRATE_MODE, MMAL_CONTROL_TYPE_STD_MENU, -+ 0, ARRAY_SIZE(bitrate_mode_qmenu) - 1, -+ 0, 0, bitrate_mode_qmenu, -+ MMAL_PARAMETER_RATECONTROL, -+ &ctrl_set_bitrate_mode, -+ false -+ }, -+ { -+ V4L2_CID_MPEG_VIDEO_BITRATE, MMAL_CONTROL_TYPE_STD, -+ 25*1000, 25*1000*1000, 10*1000*1000, 25*1000, NULL, -+ MMAL_PARAMETER_VIDEO_BIT_RATE, -+ &ctrl_set_bitrate, -+ false -+ }, -+ { -+ V4L2_CID_JPEG_COMPRESSION_QUALITY, MMAL_CONTROL_TYPE_STD, -+ 1, 100, -+ 30, 1, NULL, -+ MMAL_PARAMETER_JPEG_Q_FACTOR, -+ &ctrl_set_image_encode_output, -+ false -+ }, -+ { -+ V4L2_CID_POWER_LINE_FREQUENCY, MMAL_CONTROL_TYPE_STD_MENU, -+ 0, ARRAY_SIZE(mains_freq_qmenu) - 1, -+ 1, 1, NULL, -+ MMAL_PARAMETER_FLICKER_AVOID, -+ &ctrl_set_flicker_avoidance, -+ false -+ }, -+ { -+ V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER, MMAL_CONTROL_TYPE_STD, -+ 0, 1, -+ 0, 1, NULL, -+ MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER, -+ &ctrl_set_video_encode_param_output, -+ true /* Errors ignored as requires latest firmware to work */ -+ }, -+ { -+ V4L2_CID_MPEG_VIDEO_H264_PROFILE, -+ MMAL_CONTROL_TYPE_STD_MENU, -+ ~((1<ctrls[c]) && (v4l2_ctrls[c].setter)) { -+ ret = v4l2_ctrls[c].setter(dev, dev->ctrls[c], -+ &v4l2_ctrls[c]); -+ if (!v4l2_ctrls[c].ignore_errors && ret) { -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Failed when setting default values for ctrl %d\n", -+ c); -+ break; -+ } -+ } -+ } -+ return ret; -+} -+ -+int set_framerate_params(struct bm2835_mmal_dev *dev) -+{ -+ struct mmal_parameter_fps_range fps_range; -+ int ret; -+ -+ if ((dev->exposure_mode_active != MMAL_PARAM_EXPOSUREMODE_OFF) && -+ (dev->exp_auto_priority)) { -+ /* Variable FPS. Define min FPS as 1fps. -+ * Max as max defined FPS. -+ */ -+ fps_range.fps_low.num = 1; -+ fps_range.fps_low.den = 1; -+ fps_range.fps_high.num = dev->capture.timeperframe.denominator; -+ fps_range.fps_high.den = dev->capture.timeperframe.numerator; -+ } else { -+ /* Fixed FPS - set min and max to be the same */ -+ fps_range.fps_low.num = fps_range.fps_high.num = -+ dev->capture.timeperframe.denominator; -+ fps_range.fps_low.den = fps_range.fps_high.den = -+ dev->capture.timeperframe.numerator; -+ } -+ -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Set fps range to %d/%d to %d/%d\n", -+ fps_range.fps_low.num, -+ fps_range.fps_low.den, -+ fps_range.fps_high.num, -+ fps_range.fps_high.den -+ ); -+ -+ ret = vchiq_mmal_port_parameter_set(dev->instance, -+ &dev->component[MMAL_COMPONENT_CAMERA]-> -+ output[MMAL_CAMERA_PORT_PREVIEW], -+ MMAL_PARAMETER_FPS_RANGE, -+ &fps_range, sizeof(fps_range)); -+ ret += vchiq_mmal_port_parameter_set(dev->instance, -+ &dev->component[MMAL_COMPONENT_CAMERA]-> -+ output[MMAL_CAMERA_PORT_VIDEO], -+ MMAL_PARAMETER_FPS_RANGE, -+ &fps_range, sizeof(fps_range)); -+ ret += vchiq_mmal_port_parameter_set(dev->instance, -+ &dev->component[MMAL_COMPONENT_CAMERA]-> -+ output[MMAL_CAMERA_PORT_CAPTURE], -+ MMAL_PARAMETER_FPS_RANGE, -+ &fps_range, sizeof(fps_range)); -+ if (ret) -+ v4l2_dbg(0, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Failed to set fps ret %d\n", -+ ret); -+ -+ return ret; -+ -+} -+ -+int bm2835_mmal_init_controls(struct bm2835_mmal_dev *dev, -+ struct v4l2_ctrl_handler *hdl) -+{ -+ int c; -+ const struct bm2835_mmal_v4l2_ctrl *ctrl; -+ -+ v4l2_ctrl_handler_init(hdl, V4L2_CTRL_COUNT); -+ -+ for (c = 0; c < V4L2_CTRL_COUNT; c++) { -+ ctrl = &v4l2_ctrls[c]; -+ -+ switch (ctrl->type) { -+ case MMAL_CONTROL_TYPE_STD: -+ dev->ctrls[c] = v4l2_ctrl_new_std(hdl, -+ &bm2835_mmal_ctrl_ops, ctrl->id, -+ ctrl->min, ctrl->max, ctrl->step, ctrl->def); -+ break; -+ -+ case MMAL_CONTROL_TYPE_STD_MENU: -+ { -+ int mask = ctrl->min; -+ -+ if (ctrl->id == V4L2_CID_SCENE_MODE) { -+ /* Special handling to work out the mask -+ * value based on the scene_configs array -+ * at runtime. Reduces the chance of -+ * mismatches. -+ */ -+ int i; -+ mask = 1<ctrls[c] = v4l2_ctrl_new_std_menu(hdl, -+ &bm2835_mmal_ctrl_ops, ctrl->id, -+ ctrl->max, mask, ctrl->def); -+ break; -+ } -+ -+ case MMAL_CONTROL_TYPE_INT_MENU: -+ dev->ctrls[c] = v4l2_ctrl_new_int_menu(hdl, -+ &bm2835_mmal_ctrl_ops, ctrl->id, -+ ctrl->max, ctrl->def, ctrl->imenu); -+ break; -+ -+ case MMAL_CONTROL_TYPE_CLUSTER: -+ /* skip this entry when constructing controls */ -+ continue; -+ } -+ -+ if (hdl->error) -+ break; -+ -+ dev->ctrls[c]->priv = (void *)ctrl; -+ } -+ -+ if (hdl->error) { -+ pr_err("error adding control %d/%d id 0x%x\n", c, -+ V4L2_CTRL_COUNT, ctrl->id); -+ return hdl->error; -+ } -+ -+ for (c = 0; c < V4L2_CTRL_COUNT; c++) { -+ ctrl = &v4l2_ctrls[c]; -+ -+ switch (ctrl->type) { -+ case MMAL_CONTROL_TYPE_CLUSTER: -+ v4l2_ctrl_auto_cluster(ctrl->min, -+ &dev->ctrls[c+1], -+ ctrl->max, -+ ctrl->def); -+ break; -+ -+ case MMAL_CONTROL_TYPE_STD: -+ case MMAL_CONTROL_TYPE_STD_MENU: -+ case MMAL_CONTROL_TYPE_INT_MENU: -+ break; -+ } -+ -+ } -+ -+ return 0; -+} ---- /dev/null -+++ b/drivers/media/platform/bcm2835/mmal-common.h -@@ -0,0 +1,53 @@ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive -+ * for more details. -+ * -+ * Authors: Vincent Sanders -+ * Dave Stevenson -+ * Simon Mellor -+ * Luke Diamand -+ * -+ * MMAL structures -+ * -+ */ -+ -+#define MMAL_FOURCC(a, b, c, d) ((a) | (b << 8) | (c << 16) | (d << 24)) -+#define MMAL_MAGIC MMAL_FOURCC('m', 'm', 'a', 'l') -+ -+/** Special value signalling that time is not known */ -+#define MMAL_TIME_UNKNOWN (1LL<<63) -+ -+/* mapping between v4l and mmal video modes */ -+struct mmal_fmt { -+ char *name; -+ u32 fourcc; /* v4l2 format id */ -+ int flags; /* v4l2 flags field */ -+ u32 mmal; -+ int depth; -+ u32 mmal_component; /* MMAL component index to be used to encode */ -+ u32 ybbp; /* depth of first Y plane for planar formats */ -+}; -+ -+/* buffer for one video frame */ -+struct mmal_buffer { -+ /* v4l buffer data -- must be first */ -+ struct vb2_v4l2_buffer vb; -+ -+ /* list of buffers available */ -+ struct list_head list; -+ -+ void *buffer; /* buffer pointer */ -+ unsigned long buffer_size; /* size of allocated buffer */ -+}; -+ -+/* */ -+struct mmal_colourfx { -+ s32 enable; -+ u32 u; -+ u32 v; -+}; ---- /dev/null -+++ b/drivers/media/platform/bcm2835/mmal-encodings.h -@@ -0,0 +1,127 @@ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive -+ * for more details. -+ * -+ * Authors: Vincent Sanders -+ * Dave Stevenson -+ * Simon Mellor -+ * Luke Diamand -+ */ -+#ifndef MMAL_ENCODINGS_H -+#define MMAL_ENCODINGS_H -+ -+#define MMAL_ENCODING_H264 MMAL_FOURCC('H', '2', '6', '4') -+#define MMAL_ENCODING_H263 MMAL_FOURCC('H', '2', '6', '3') -+#define MMAL_ENCODING_MP4V MMAL_FOURCC('M', 'P', '4', 'V') -+#define MMAL_ENCODING_MP2V MMAL_FOURCC('M', 'P', '2', 'V') -+#define MMAL_ENCODING_MP1V MMAL_FOURCC('M', 'P', '1', 'V') -+#define MMAL_ENCODING_WMV3 MMAL_FOURCC('W', 'M', 'V', '3') -+#define MMAL_ENCODING_WMV2 MMAL_FOURCC('W', 'M', 'V', '2') -+#define MMAL_ENCODING_WMV1 MMAL_FOURCC('W', 'M', 'V', '1') -+#define MMAL_ENCODING_WVC1 MMAL_FOURCC('W', 'V', 'C', '1') -+#define MMAL_ENCODING_VP8 MMAL_FOURCC('V', 'P', '8', ' ') -+#define MMAL_ENCODING_VP7 MMAL_FOURCC('V', 'P', '7', ' ') -+#define MMAL_ENCODING_VP6 MMAL_FOURCC('V', 'P', '6', ' ') -+#define MMAL_ENCODING_THEORA MMAL_FOURCC('T', 'H', 'E', 'O') -+#define MMAL_ENCODING_SPARK MMAL_FOURCC('S', 'P', 'R', 'K') -+#define MMAL_ENCODING_MJPEG MMAL_FOURCC('M', 'J', 'P', 'G') -+ -+#define MMAL_ENCODING_JPEG MMAL_FOURCC('J', 'P', 'E', 'G') -+#define MMAL_ENCODING_GIF MMAL_FOURCC('G', 'I', 'F', ' ') -+#define MMAL_ENCODING_PNG MMAL_FOURCC('P', 'N', 'G', ' ') -+#define MMAL_ENCODING_PPM MMAL_FOURCC('P', 'P', 'M', ' ') -+#define MMAL_ENCODING_TGA MMAL_FOURCC('T', 'G', 'A', ' ') -+#define MMAL_ENCODING_BMP MMAL_FOURCC('B', 'M', 'P', ' ') -+ -+#define MMAL_ENCODING_I420 MMAL_FOURCC('I', '4', '2', '0') -+#define MMAL_ENCODING_I420_SLICE MMAL_FOURCC('S', '4', '2', '0') -+#define MMAL_ENCODING_YV12 MMAL_FOURCC('Y', 'V', '1', '2') -+#define MMAL_ENCODING_I422 MMAL_FOURCC('I', '4', '2', '2') -+#define MMAL_ENCODING_I422_SLICE MMAL_FOURCC('S', '4', '2', '2') -+#define MMAL_ENCODING_YUYV MMAL_FOURCC('Y', 'U', 'Y', 'V') -+#define MMAL_ENCODING_YVYU MMAL_FOURCC('Y', 'V', 'Y', 'U') -+#define MMAL_ENCODING_UYVY MMAL_FOURCC('U', 'Y', 'V', 'Y') -+#define MMAL_ENCODING_VYUY MMAL_FOURCC('V', 'Y', 'U', 'Y') -+#define MMAL_ENCODING_NV12 MMAL_FOURCC('N', 'V', '1', '2') -+#define MMAL_ENCODING_NV21 MMAL_FOURCC('N', 'V', '2', '1') -+#define MMAL_ENCODING_ARGB MMAL_FOURCC('A', 'R', 'G', 'B') -+#define MMAL_ENCODING_RGBA MMAL_FOURCC('R', 'G', 'B', 'A') -+#define MMAL_ENCODING_ABGR MMAL_FOURCC('A', 'B', 'G', 'R') -+#define MMAL_ENCODING_BGRA MMAL_FOURCC('B', 'G', 'R', 'A') -+#define MMAL_ENCODING_RGB16 MMAL_FOURCC('R', 'G', 'B', '2') -+#define MMAL_ENCODING_RGB24 MMAL_FOURCC('R', 'G', 'B', '3') -+#define MMAL_ENCODING_RGB32 MMAL_FOURCC('R', 'G', 'B', '4') -+#define MMAL_ENCODING_BGR16 MMAL_FOURCC('B', 'G', 'R', '2') -+#define MMAL_ENCODING_BGR24 MMAL_FOURCC('B', 'G', 'R', '3') -+#define MMAL_ENCODING_BGR32 MMAL_FOURCC('B', 'G', 'R', '4') -+ -+/** SAND Video (YUVUV128) format, native format understood by VideoCore. -+ * This format is *not* opaque - if requested you will receive full frames -+ * of YUV_UV video. -+ */ -+#define MMAL_ENCODING_YUVUV128 MMAL_FOURCC('S', 'A', 'N', 'D') -+ -+/** VideoCore opaque image format, image handles are returned to -+ * the host but not the actual image data. -+ */ -+#define MMAL_ENCODING_OPAQUE MMAL_FOURCC('O', 'P', 'Q', 'V') -+ -+/** An EGL image handle -+ */ -+#define MMAL_ENCODING_EGL_IMAGE MMAL_FOURCC('E', 'G', 'L', 'I') -+ -+/* }@ */ -+ -+/** \name Pre-defined audio encodings */ -+/* @{ */ -+#define MMAL_ENCODING_PCM_UNSIGNED_BE MMAL_FOURCC('P', 'C', 'M', 'U') -+#define MMAL_ENCODING_PCM_UNSIGNED_LE MMAL_FOURCC('p', 'c', 'm', 'u') -+#define MMAL_ENCODING_PCM_SIGNED_BE MMAL_FOURCC('P', 'C', 'M', 'S') -+#define MMAL_ENCODING_PCM_SIGNED_LE MMAL_FOURCC('p', 'c', 'm', 's') -+#define MMAL_ENCODING_PCM_FLOAT_BE MMAL_FOURCC('P', 'C', 'M', 'F') -+#define MMAL_ENCODING_PCM_FLOAT_LE MMAL_FOURCC('p', 'c', 'm', 'f') -+ -+/* Pre-defined H264 encoding variants */ -+ -+/** ISO 14496-10 Annex B byte stream format */ -+#define MMAL_ENCODING_VARIANT_H264_DEFAULT 0 -+/** ISO 14496-15 AVC stream format */ -+#define MMAL_ENCODING_VARIANT_H264_AVC1 MMAL_FOURCC('A', 'V', 'C', '1') -+/** Implicitly delineated NAL units without emulation prevention */ -+#define MMAL_ENCODING_VARIANT_H264_RAW MMAL_FOURCC('R', 'A', 'W', ' ') -+ -+ -+/** \defgroup MmalColorSpace List of pre-defined video color spaces -+ * This defines a list of common color spaces. This list isn't exhaustive and -+ * is only provided as a convenience to avoid clients having to use FourCC -+ * codes directly. However components are allowed to define and use their own -+ * FourCC codes. -+ */ -+/* @{ */ -+ -+/** Unknown color space */ -+#define MMAL_COLOR_SPACE_UNKNOWN 0 -+/** ITU-R BT.601-5 [SDTV] */ -+#define MMAL_COLOR_SPACE_ITUR_BT601 MMAL_FOURCC('Y', '6', '0', '1') -+/** ITU-R BT.709-3 [HDTV] */ -+#define MMAL_COLOR_SPACE_ITUR_BT709 MMAL_FOURCC('Y', '7', '0', '9') -+/** JPEG JFIF */ -+#define MMAL_COLOR_SPACE_JPEG_JFIF MMAL_FOURCC('Y', 'J', 'F', 'I') -+/** Title 47 Code of Federal Regulations (2003) 73.682 (a) (20) */ -+#define MMAL_COLOR_SPACE_FCC MMAL_FOURCC('Y', 'F', 'C', 'C') -+/** Society of Motion Picture and Television Engineers 240M (1999) */ -+#define MMAL_COLOR_SPACE_SMPTE240M MMAL_FOURCC('Y', '2', '4', '0') -+/** ITU-R BT.470-2 System M */ -+#define MMAL_COLOR_SPACE_BT470_2_M MMAL_FOURCC('Y', '_', '_', 'M') -+/** ITU-R BT.470-2 System BG */ -+#define MMAL_COLOR_SPACE_BT470_2_BG MMAL_FOURCC('Y', '_', 'B', 'G') -+/** JPEG JFIF, but with 16..255 luma */ -+#define MMAL_COLOR_SPACE_JFIF_Y16_255 MMAL_FOURCC('Y', 'Y', '1', '6') -+/* @} MmalColorSpace List */ -+ -+#endif /* MMAL_ENCODINGS_H */ ---- /dev/null -+++ b/drivers/media/platform/bcm2835/mmal-msg-common.h -@@ -0,0 +1,50 @@ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive -+ * for more details. -+ * -+ * Authors: Vincent Sanders -+ * Dave Stevenson -+ * Simon Mellor -+ * Luke Diamand -+ */ -+ -+#ifndef MMAL_MSG_COMMON_H -+#define MMAL_MSG_COMMON_H -+ -+enum mmal_msg_status { -+ MMAL_MSG_STATUS_SUCCESS = 0, /**< Success */ -+ MMAL_MSG_STATUS_ENOMEM, /**< Out of memory */ -+ MMAL_MSG_STATUS_ENOSPC, /**< Out of resources other than memory */ -+ MMAL_MSG_STATUS_EINVAL, /**< Argument is invalid */ -+ MMAL_MSG_STATUS_ENOSYS, /**< Function not implemented */ -+ MMAL_MSG_STATUS_ENOENT, /**< No such file or directory */ -+ MMAL_MSG_STATUS_ENXIO, /**< No such device or address */ -+ MMAL_MSG_STATUS_EIO, /**< I/O error */ -+ MMAL_MSG_STATUS_ESPIPE, /**< Illegal seek */ -+ MMAL_MSG_STATUS_ECORRUPT, /**< Data is corrupt \attention */ -+ MMAL_MSG_STATUS_ENOTREADY, /**< Component is not ready */ -+ MMAL_MSG_STATUS_ECONFIG, /**< Component is not configured */ -+ MMAL_MSG_STATUS_EISCONN, /**< Port is already connected */ -+ MMAL_MSG_STATUS_ENOTCONN, /**< Port is disconnected */ -+ MMAL_MSG_STATUS_EAGAIN, /**< Resource temporarily unavailable. */ -+ MMAL_MSG_STATUS_EFAULT, /**< Bad address */ -+}; -+ -+struct mmal_rect { -+ s32 x; /**< x coordinate (from left) */ -+ s32 y; /**< y coordinate (from top) */ -+ s32 width; /**< width */ -+ s32 height; /**< height */ -+}; -+ -+struct mmal_rational { -+ s32 num; /**< Numerator */ -+ s32 den; /**< Denominator */ -+}; -+ -+#endif /* MMAL_MSG_COMMON_H */ ---- /dev/null -+++ b/drivers/media/platform/bcm2835/mmal-msg-format.h -@@ -0,0 +1,81 @@ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive -+ * for more details. -+ * -+ * Authors: Vincent Sanders -+ * Dave Stevenson -+ * Simon Mellor -+ * Luke Diamand -+ */ -+ -+#ifndef MMAL_MSG_FORMAT_H -+#define MMAL_MSG_FORMAT_H -+ -+#include "mmal-msg-common.h" -+ -+/* MMAL_ES_FORMAT_T */ -+ -+ -+struct mmal_audio_format { -+ u32 channels; /**< Number of audio channels */ -+ u32 sample_rate; /**< Sample rate */ -+ -+ u32 bits_per_sample; /**< Bits per sample */ -+ u32 block_align; /**< Size of a block of data */ -+}; -+ -+struct mmal_video_format { -+ u32 width; /**< Width of frame in pixels */ -+ u32 height; /**< Height of frame in rows of pixels */ -+ struct mmal_rect crop; /**< Visible region of the frame */ -+ struct mmal_rational frame_rate; /**< Frame rate */ -+ struct mmal_rational par; /**< Pixel aspect ratio */ -+ -+ /* FourCC specifying the color space of the video stream. See the -+ * \ref MmalColorSpace "pre-defined color spaces" for some examples. -+ */ -+ u32 color_space; -+}; -+ -+struct mmal_subpicture_format { -+ u32 x_offset; -+ u32 y_offset; -+}; -+ -+union mmal_es_specific_format { -+ struct mmal_audio_format audio; -+ struct mmal_video_format video; -+ struct mmal_subpicture_format subpicture; -+}; -+ -+/** Definition of an elementary stream format (MMAL_ES_FORMAT_T) */ -+struct mmal_es_format { -+ u32 type; /* enum mmal_es_type */ -+ -+ u32 encoding; /* FourCC specifying encoding of the elementary stream.*/ -+ u32 encoding_variant; /* FourCC specifying the specific -+ * encoding variant of the elementary -+ * stream. -+ */ -+ -+ union mmal_es_specific_format *es; /* TODO: pointers in -+ * message serialisation?!? -+ */ -+ /* Type specific -+ * information for the -+ * elementary stream -+ */ -+ -+ u32 bitrate; /**< Bitrate in bits per second */ -+ u32 flags; /**< Flags describing properties of the elementary stream. */ -+ -+ u32 extradata_size; /**< Size of the codec specific data */ -+ u8 *extradata; /**< Codec specific data */ -+}; -+ -+#endif /* MMAL_MSG_FORMAT_H */ ---- /dev/null -+++ b/drivers/media/platform/bcm2835/mmal-msg-port.h -@@ -0,0 +1,107 @@ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive -+ * for more details. -+ * -+ * Authors: Vincent Sanders -+ * Dave Stevenson -+ * Simon Mellor -+ * Luke Diamand -+ */ -+ -+/* MMAL_PORT_TYPE_T */ -+enum mmal_port_type { -+ MMAL_PORT_TYPE_UNKNOWN = 0, /**< Unknown port type */ -+ MMAL_PORT_TYPE_CONTROL, /**< Control port */ -+ MMAL_PORT_TYPE_INPUT, /**< Input port */ -+ MMAL_PORT_TYPE_OUTPUT, /**< Output port */ -+ MMAL_PORT_TYPE_CLOCK, /**< Clock port */ -+}; -+ -+/** The port is pass-through and doesn't need buffer headers allocated */ -+#define MMAL_PORT_CAPABILITY_PASSTHROUGH 0x01 -+/** The port wants to allocate the buffer payloads. -+ * This signals a preference that payload allocation should be done -+ * on this port for efficiency reasons. */ -+#define MMAL_PORT_CAPABILITY_ALLOCATION 0x02 -+/** The port supports format change events. -+ * This applies to input ports and is used to let the client know -+ * whether the port supports being reconfigured via a format -+ * change event (i.e. without having to disable the port). */ -+#define MMAL_PORT_CAPABILITY_SUPPORTS_EVENT_FORMAT_CHANGE 0x04 -+ -+/* mmal port structure (MMAL_PORT_T) -+ * -+ * most elements are informational only, the pointer values for -+ * interogation messages are generally provided as additional -+ * strucures within the message. When used to set values only teh -+ * buffer_num, buffer_size and userdata parameters are writable. -+ */ -+struct mmal_port { -+ void *priv; /* Private member used by the framework */ -+ const char *name; /* Port name. Used for debugging purposes (RO) */ -+ -+ u32 type; /* Type of the port (RO) enum mmal_port_type */ -+ u16 index; /* Index of the port in its type list (RO) */ -+ u16 index_all; /* Index of the port in the list of all ports (RO) */ -+ -+ u32 is_enabled; /* Indicates whether the port is enabled or not (RO) */ -+ struct mmal_es_format *format; /* Format of the elementary stream */ -+ -+ u32 buffer_num_min; /* Minimum number of buffers the port -+ * requires (RO). This is set by the -+ * component. -+ */ -+ -+ u32 buffer_size_min; /* Minimum size of buffers the port -+ * requires (RO). This is set by the -+ * component. -+ */ -+ -+ u32 buffer_alignment_min; /* Minimum alignment requirement for -+ * the buffers (RO). A value of -+ * zero means no special alignment -+ * requirements. This is set by the -+ * component. -+ */ -+ -+ u32 buffer_num_recommended; /* Number of buffers the port -+ * recommends for optimal -+ * performance (RO). A value of -+ * zero means no special -+ * recommendation. This is set -+ * by the component. -+ */ -+ -+ u32 buffer_size_recommended; /* Size of buffers the port -+ * recommends for optimal -+ * performance (RO). A value of -+ * zero means no special -+ * recommendation. This is set -+ * by the component. -+ */ -+ -+ u32 buffer_num; /* Actual number of buffers the port will use. -+ * This is set by the client. -+ */ -+ -+ u32 buffer_size; /* Actual maximum size of the buffers that -+ * will be sent to the port. This is set by -+ * the client. -+ */ -+ -+ void *component; /* Component this port belongs to (Read Only) */ -+ -+ void *userdata; /* Field reserved for use by the client */ -+ -+ u32 capabilities; /* Flags describing the capabilities of a -+ * port (RO). Bitwise combination of \ref -+ * portcapabilities "Port capabilities" -+ * values. -+ */ -+ -+}; ---- /dev/null -+++ b/drivers/media/platform/bcm2835/mmal-msg.h -@@ -0,0 +1,404 @@ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive -+ * for more details. -+ * -+ * Authors: Vincent Sanders -+ * Dave Stevenson -+ * Simon Mellor -+ * Luke Diamand -+ */ -+ -+/* all the data structures which serialise the MMAL protocol. note -+ * these are directly mapped onto the recived message data. -+ * -+ * BEWARE: They seem to *assume* pointers are u32 and that there is no -+ * structure padding! -+ * -+ * NOTE: this implementation uses kernel types to ensure sizes. Rather -+ * than assigning values to enums to force their size the -+ * implementation uses fixed size types and not the enums (though the -+ * comments have the actual enum type -+ */ -+ -+#define VC_MMAL_VER 15 -+#define VC_MMAL_MIN_VER 10 -+#define VC_MMAL_SERVER_NAME MAKE_FOURCC("mmal") -+ -+/* max total message size is 512 bytes */ -+#define MMAL_MSG_MAX_SIZE 512 -+/* with six 32bit header elements max payload is therefore 488 bytes */ -+#define MMAL_MSG_MAX_PAYLOAD 488 -+ -+#include "mmal-msg-common.h" -+#include "mmal-msg-format.h" -+#include "mmal-msg-port.h" -+ -+enum mmal_msg_type { -+ MMAL_MSG_TYPE_QUIT = 1, -+ MMAL_MSG_TYPE_SERVICE_CLOSED, -+ MMAL_MSG_TYPE_GET_VERSION, -+ MMAL_MSG_TYPE_COMPONENT_CREATE, -+ MMAL_MSG_TYPE_COMPONENT_DESTROY, /* 5 */ -+ MMAL_MSG_TYPE_COMPONENT_ENABLE, -+ MMAL_MSG_TYPE_COMPONENT_DISABLE, -+ MMAL_MSG_TYPE_PORT_INFO_GET, -+ MMAL_MSG_TYPE_PORT_INFO_SET, -+ MMAL_MSG_TYPE_PORT_ACTION, /* 10 */ -+ MMAL_MSG_TYPE_BUFFER_FROM_HOST, -+ MMAL_MSG_TYPE_BUFFER_TO_HOST, -+ MMAL_MSG_TYPE_GET_STATS, -+ MMAL_MSG_TYPE_PORT_PARAMETER_SET, -+ MMAL_MSG_TYPE_PORT_PARAMETER_GET, /* 15 */ -+ MMAL_MSG_TYPE_EVENT_TO_HOST, -+ MMAL_MSG_TYPE_GET_CORE_STATS_FOR_PORT, -+ MMAL_MSG_TYPE_OPAQUE_ALLOCATOR, -+ MMAL_MSG_TYPE_CONSUME_MEM, -+ MMAL_MSG_TYPE_LMK, /* 20 */ -+ MMAL_MSG_TYPE_OPAQUE_ALLOCATOR_DESC, -+ MMAL_MSG_TYPE_DRM_GET_LHS32, -+ MMAL_MSG_TYPE_DRM_GET_TIME, -+ MMAL_MSG_TYPE_BUFFER_FROM_HOST_ZEROLEN, -+ MMAL_MSG_TYPE_PORT_FLUSH, /* 25 */ -+ MMAL_MSG_TYPE_HOST_LOG, -+ MMAL_MSG_TYPE_MSG_LAST -+}; -+ -+/* port action request messages differ depending on the action type */ -+enum mmal_msg_port_action_type { -+ MMAL_MSG_PORT_ACTION_TYPE_UNKNOWN = 0, /* Unkown action */ -+ MMAL_MSG_PORT_ACTION_TYPE_ENABLE, /* Enable a port */ -+ MMAL_MSG_PORT_ACTION_TYPE_DISABLE, /* Disable a port */ -+ MMAL_MSG_PORT_ACTION_TYPE_FLUSH, /* Flush a port */ -+ MMAL_MSG_PORT_ACTION_TYPE_CONNECT, /* Connect ports */ -+ MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, /* Disconnect ports */ -+ MMAL_MSG_PORT_ACTION_TYPE_SET_REQUIREMENTS, /* Set buffer requirements*/ -+}; -+ -+struct mmal_msg_header { -+ u32 magic; -+ u32 type; /** enum mmal_msg_type */ -+ -+ /* Opaque handle to the control service */ -+ struct mmal_control_service *control_service; -+ -+ struct mmal_msg_context *context; /** a u32 per message context */ -+ u32 status; /** The status of the vchiq operation */ -+ u32 padding; -+}; -+ -+/* Send from VC to host to report version */ -+struct mmal_msg_version { -+ u32 flags; -+ u32 major; -+ u32 minor; -+ u32 minimum; -+}; -+ -+/* request to VC to create component */ -+struct mmal_msg_component_create { -+ void *client_component; /* component context */ -+ char name[128]; -+ u32 pid; /* For debug */ -+}; -+ -+/* reply from VC to component creation request */ -+struct mmal_msg_component_create_reply { -+ u32 status; /** enum mmal_msg_status - how does this differ to -+ * the one in the header? -+ */ -+ u32 component_handle; /* VideoCore handle for component */ -+ u32 input_num; /* Number of input ports */ -+ u32 output_num; /* Number of output ports */ -+ u32 clock_num; /* Number of clock ports */ -+}; -+ -+/* request to VC to destroy a component */ -+struct mmal_msg_component_destroy { -+ u32 component_handle; -+}; -+ -+struct mmal_msg_component_destroy_reply { -+ u32 status; /** The component destruction status */ -+}; -+ -+ -+/* request and reply to VC to enable a component */ -+struct mmal_msg_component_enable { -+ u32 component_handle; -+}; -+ -+struct mmal_msg_component_enable_reply { -+ u32 status; /** The component enable status */ -+}; -+ -+ -+/* request and reply to VC to disable a component */ -+struct mmal_msg_component_disable { -+ u32 component_handle; -+}; -+ -+struct mmal_msg_component_disable_reply { -+ u32 status; /** The component disable status */ -+}; -+ -+/* request to VC to get port information */ -+struct mmal_msg_port_info_get { -+ u32 component_handle; /* component handle port is associated with */ -+ u32 port_type; /* enum mmal_msg_port_type */ -+ u32 index; /* port index to query */ -+}; -+ -+/* reply from VC to get port info request */ -+struct mmal_msg_port_info_get_reply { -+ u32 status; /** enum mmal_msg_status */ -+ u32 component_handle; /* component handle port is associated with */ -+ u32 port_type; /* enum mmal_msg_port_type */ -+ u32 port_index; /* port indexed in query */ -+ s32 found; /* unused */ -+ u32 port_handle; /**< Handle to use for this port */ -+ struct mmal_port port; -+ struct mmal_es_format format; /* elementry stream format */ -+ union mmal_es_specific_format es; /* es type specific data */ -+ u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; /* es extra data */ -+}; -+ -+/* request to VC to set port information */ -+struct mmal_msg_port_info_set { -+ u32 component_handle; -+ u32 port_type; /* enum mmal_msg_port_type */ -+ u32 port_index; /* port indexed in query */ -+ struct mmal_port port; -+ struct mmal_es_format format; -+ union mmal_es_specific_format es; -+ u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; -+}; -+ -+/* reply from VC to port info set request */ -+struct mmal_msg_port_info_set_reply { -+ u32 status; -+ u32 component_handle; /* component handle port is associated with */ -+ u32 port_type; /* enum mmal_msg_port_type */ -+ u32 index; /* port indexed in query */ -+ s32 found; /* unused */ -+ u32 port_handle; /**< Handle to use for this port */ -+ struct mmal_port port; -+ struct mmal_es_format format; -+ union mmal_es_specific_format es; -+ u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; -+}; -+ -+ -+/* port action requests that take a mmal_port as a parameter */ -+struct mmal_msg_port_action_port { -+ u32 component_handle; -+ u32 port_handle; -+ u32 action; /* enum mmal_msg_port_action_type */ -+ struct mmal_port port; -+}; -+ -+/* port action requests that take handles as a parameter */ -+struct mmal_msg_port_action_handle { -+ u32 component_handle; -+ u32 port_handle; -+ u32 action; /* enum mmal_msg_port_action_type */ -+ u32 connect_component_handle; -+ u32 connect_port_handle; -+}; -+ -+struct mmal_msg_port_action_reply { -+ u32 status; /** The port action operation status */ -+}; -+ -+ -+ -+ -+/* MMAL buffer transfer */ -+ -+/** Size of space reserved in a buffer message for short messages. */ -+#define MMAL_VC_SHORT_DATA 128 -+ -+/** Signals that the current payload is the end of the stream of data */ -+#define MMAL_BUFFER_HEADER_FLAG_EOS (1<<0) -+/** Signals that the start of the current payload starts a frame */ -+#define MMAL_BUFFER_HEADER_FLAG_FRAME_START (1<<1) -+/** Signals that the end of the current payload ends a frame */ -+#define MMAL_BUFFER_HEADER_FLAG_FRAME_END (1<<2) -+/** Signals that the current payload contains only complete frames (>1) */ -+#define MMAL_BUFFER_HEADER_FLAG_FRAME \ -+ (MMAL_BUFFER_HEADER_FLAG_FRAME_START|MMAL_BUFFER_HEADER_FLAG_FRAME_END) -+/** Signals that the current payload is a keyframe (i.e. self decodable) */ -+#define MMAL_BUFFER_HEADER_FLAG_KEYFRAME (1<<3) -+/** Signals a discontinuity in the stream of data (e.g. after a seek). -+ * Can be used for instance by a decoder to reset its state */ -+#define MMAL_BUFFER_HEADER_FLAG_DISCONTINUITY (1<<4) -+/** Signals a buffer containing some kind of config data for the component -+ * (e.g. codec config data) */ -+#define MMAL_BUFFER_HEADER_FLAG_CONFIG (1<<5) -+/** Signals an encrypted payload */ -+#define MMAL_BUFFER_HEADER_FLAG_ENCRYPTED (1<<6) -+/** Signals a buffer containing side information */ -+#define MMAL_BUFFER_HEADER_FLAG_CODECSIDEINFO (1<<7) -+/** Signals a buffer which is the snapshot/postview image from a stills -+ * capture -+ */ -+#define MMAL_BUFFER_HEADER_FLAGS_SNAPSHOT (1<<8) -+/** Signals a buffer which contains data known to be corrupted */ -+#define MMAL_BUFFER_HEADER_FLAG_CORRUPTED (1<<9) -+/** Signals that a buffer failed to be transmitted */ -+#define MMAL_BUFFER_HEADER_FLAG_TRANSMISSION_FAILED (1<<10) -+ -+struct mmal_driver_buffer { -+ u32 magic; -+ u32 component_handle; -+ u32 port_handle; -+ void *client_context; -+}; -+ -+/* buffer header */ -+struct mmal_buffer_header { -+ struct mmal_buffer_header *next; /* next header */ -+ void *priv; /* framework private data */ -+ u32 cmd; -+ void *data; -+ u32 alloc_size; -+ u32 length; -+ u32 offset; -+ u32 flags; -+ s64 pts; -+ s64 dts; -+ void *type; -+ void *user_data; -+}; -+ -+struct mmal_buffer_header_type_specific { -+ union { -+ struct { -+ u32 planes; -+ u32 offset[4]; -+ u32 pitch[4]; -+ u32 flags; -+ } video; -+ } u; -+}; -+ -+struct mmal_msg_buffer_from_host { -+ /* The front 32 bytes of the buffer header are copied -+ * back to us in the reply to allow for context. This -+ * area is used to store two mmal_driver_buffer structures to -+ * allow for multiple concurrent service users. -+ */ -+ /* control data */ -+ struct mmal_driver_buffer drvbuf; -+ -+ /* referenced control data for passthrough buffer management */ -+ struct mmal_driver_buffer drvbuf_ref; -+ struct mmal_buffer_header buffer_header; /* buffer header itself */ -+ struct mmal_buffer_header_type_specific buffer_header_type_specific; -+ s32 is_zero_copy; -+ s32 has_reference; -+ -+ /** allows short data to be xfered in control message */ -+ u32 payload_in_message; -+ u8 short_data[MMAL_VC_SHORT_DATA]; -+}; -+ -+ -+/* port parameter setting */ -+ -+#define MMAL_WORKER_PORT_PARAMETER_SPACE 96 -+ -+struct mmal_msg_port_parameter_set { -+ u32 component_handle; /* component */ -+ u32 port_handle; /* port */ -+ u32 id; /* Parameter ID */ -+ u32 size; /* Parameter size */ -+ uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; -+}; -+ -+struct mmal_msg_port_parameter_set_reply { -+ u32 status; /** enum mmal_msg_status todo: how does this -+ * differ to the one in the header? -+ */ -+}; -+ -+/* port parameter getting */ -+ -+struct mmal_msg_port_parameter_get { -+ u32 component_handle; /* component */ -+ u32 port_handle; /* port */ -+ u32 id; /* Parameter ID */ -+ u32 size; /* Parameter size */ -+}; -+ -+struct mmal_msg_port_parameter_get_reply { -+ u32 status; /* Status of mmal_port_parameter_get call */ -+ u32 id; /* Parameter ID */ -+ u32 size; /* Parameter size */ -+ uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; -+}; -+ -+/* event messages */ -+#define MMAL_WORKER_EVENT_SPACE 256 -+ -+struct mmal_msg_event_to_host { -+ void *client_component; /* component context */ -+ -+ u32 port_type; -+ u32 port_num; -+ -+ u32 cmd; -+ u32 length; -+ u8 data[MMAL_WORKER_EVENT_SPACE]; -+ struct mmal_buffer_header *delayed_buffer; -+}; -+ -+/* all mmal messages are serialised through this structure */ -+struct mmal_msg { -+ /* header */ -+ struct mmal_msg_header h; -+ /* payload */ -+ union { -+ struct mmal_msg_version version; -+ -+ struct mmal_msg_component_create component_create; -+ struct mmal_msg_component_create_reply component_create_reply; -+ -+ struct mmal_msg_component_destroy component_destroy; -+ struct mmal_msg_component_destroy_reply component_destroy_reply; -+ -+ struct mmal_msg_component_enable component_enable; -+ struct mmal_msg_component_enable_reply component_enable_reply; -+ -+ struct mmal_msg_component_disable component_disable; -+ struct mmal_msg_component_disable_reply component_disable_reply; -+ -+ struct mmal_msg_port_info_get port_info_get; -+ struct mmal_msg_port_info_get_reply port_info_get_reply; -+ -+ struct mmal_msg_port_info_set port_info_set; -+ struct mmal_msg_port_info_set_reply port_info_set_reply; -+ -+ struct mmal_msg_port_action_port port_action_port; -+ struct mmal_msg_port_action_handle port_action_handle; -+ struct mmal_msg_port_action_reply port_action_reply; -+ -+ struct mmal_msg_buffer_from_host buffer_from_host; -+ -+ struct mmal_msg_port_parameter_set port_parameter_set; -+ struct mmal_msg_port_parameter_set_reply -+ port_parameter_set_reply; -+ struct mmal_msg_port_parameter_get -+ port_parameter_get; -+ struct mmal_msg_port_parameter_get_reply -+ port_parameter_get_reply; -+ -+ struct mmal_msg_event_to_host event_to_host; -+ -+ u8 payload[MMAL_MSG_MAX_PAYLOAD]; -+ } u; -+}; ---- /dev/null -+++ b/drivers/media/platform/bcm2835/mmal-parameters.h -@@ -0,0 +1,689 @@ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive -+ * for more details. -+ * -+ * Authors: Vincent Sanders -+ * Dave Stevenson -+ * Simon Mellor -+ * Luke Diamand -+ */ -+ -+/* common parameters */ -+ -+/** @name Parameter groups -+ * Parameters are divided into groups, and then allocated sequentially within -+ * a group using an enum. -+ * @{ -+ */ -+ -+/** Common parameter ID group, used with many types of component. */ -+#define MMAL_PARAMETER_GROUP_COMMON (0<<16) -+/** Camera-specific parameter ID group. */ -+#define MMAL_PARAMETER_GROUP_CAMERA (1<<16) -+/** Video-specific parameter ID group. */ -+#define MMAL_PARAMETER_GROUP_VIDEO (2<<16) -+/** Audio-specific parameter ID group. */ -+#define MMAL_PARAMETER_GROUP_AUDIO (3<<16) -+/** Clock-specific parameter ID group. */ -+#define MMAL_PARAMETER_GROUP_CLOCK (4<<16) -+/** Miracast-specific parameter ID group. */ -+#define MMAL_PARAMETER_GROUP_MIRACAST (5<<16) -+ -+/* Common parameters */ -+enum mmal_parameter_common_type { -+ MMAL_PARAMETER_UNUSED /**< Never a valid parameter ID */ -+ = MMAL_PARAMETER_GROUP_COMMON, -+ MMAL_PARAMETER_SUPPORTED_ENCODINGS, /**< MMAL_PARAMETER_ENCODING_T */ -+ MMAL_PARAMETER_URI, /**< MMAL_PARAMETER_URI_T */ -+ -+ /** MMAL_PARAMETER_CHANGE_EVENT_REQUEST_T */ -+ MMAL_PARAMETER_CHANGE_EVENT_REQUEST, -+ -+ /** MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_ZERO_COPY, -+ -+ /**< MMAL_PARAMETER_BUFFER_REQUIREMENTS_T */ -+ MMAL_PARAMETER_BUFFER_REQUIREMENTS, -+ -+ MMAL_PARAMETER_STATISTICS, /**< MMAL_PARAMETER_STATISTICS_T */ -+ MMAL_PARAMETER_CORE_STATISTICS, /**< MMAL_PARAMETER_CORE_STATISTICS_T */ -+ MMAL_PARAMETER_MEM_USAGE, /**< MMAL_PARAMETER_MEM_USAGE_T */ -+ MMAL_PARAMETER_BUFFER_FLAG_FILTER, /**< MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_SEEK, /**< MMAL_PARAMETER_SEEK_T */ -+ MMAL_PARAMETER_POWERMON_ENABLE, /**< MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_LOGGING, /**< MMAL_PARAMETER_LOGGING_T */ -+ MMAL_PARAMETER_SYSTEM_TIME, /**< MMAL_PARAMETER_UINT64_T */ -+ MMAL_PARAMETER_NO_IMAGE_PADDING /**< MMAL_PARAMETER_BOOLEAN_T */ -+}; -+ -+/* camera parameters */ -+ -+enum mmal_parameter_camera_type { -+ /* 0 */ -+ /** @ref MMAL_PARAMETER_THUMBNAIL_CONFIG_T */ -+ MMAL_PARAMETER_THUMBNAIL_CONFIGURATION -+ = MMAL_PARAMETER_GROUP_CAMERA, -+ MMAL_PARAMETER_CAPTURE_QUALITY, /**< Unused? */ -+ MMAL_PARAMETER_ROTATION, /**< @ref MMAL_PARAMETER_INT32_T */ -+ MMAL_PARAMETER_EXIF_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_EXIF, /**< @ref MMAL_PARAMETER_EXIF_T */ -+ MMAL_PARAMETER_AWB_MODE, /**< @ref MMAL_PARAM_AWBMODE_T */ -+ MMAL_PARAMETER_IMAGE_EFFECT, /**< @ref MMAL_PARAMETER_IMAGEFX_T */ -+ MMAL_PARAMETER_COLOUR_EFFECT, /**< @ref MMAL_PARAMETER_COLOURFX_T */ -+ MMAL_PARAMETER_FLICKER_AVOID, /**< @ref MMAL_PARAMETER_FLICKERAVOID_T */ -+ MMAL_PARAMETER_FLASH, /**< @ref MMAL_PARAMETER_FLASH_T */ -+ MMAL_PARAMETER_REDEYE, /**< @ref MMAL_PARAMETER_REDEYE_T */ -+ MMAL_PARAMETER_FOCUS, /**< @ref MMAL_PARAMETER_FOCUS_T */ -+ MMAL_PARAMETER_FOCAL_LENGTHS, /**< Unused? */ -+ MMAL_PARAMETER_EXPOSURE_COMP, /**< @ref MMAL_PARAMETER_INT32_T */ -+ MMAL_PARAMETER_ZOOM, /**< @ref MMAL_PARAMETER_SCALEFACTOR_T */ -+ MMAL_PARAMETER_MIRROR, /**< @ref MMAL_PARAMETER_MIRROR_T */ -+ -+ /* 0x10 */ -+ MMAL_PARAMETER_CAMERA_NUM, /**< @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_CAPTURE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_EXPOSURE_MODE, /**< @ref MMAL_PARAMETER_EXPOSUREMODE_T */ -+ MMAL_PARAMETER_EXP_METERING_MODE, /**< @ref MMAL_PARAMETER_EXPOSUREMETERINGMODE_T */ -+ MMAL_PARAMETER_FOCUS_STATUS, /**< @ref MMAL_PARAMETER_FOCUS_STATUS_T */ -+ MMAL_PARAMETER_CAMERA_CONFIG, /**< @ref MMAL_PARAMETER_CAMERA_CONFIG_T */ -+ MMAL_PARAMETER_CAPTURE_STATUS, /**< @ref MMAL_PARAMETER_CAPTURE_STATUS_T */ -+ MMAL_PARAMETER_FACE_TRACK, /**< @ref MMAL_PARAMETER_FACE_TRACK_T */ -+ MMAL_PARAMETER_DRAW_BOX_FACES_AND_FOCUS, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_JPEG_Q_FACTOR, /**< @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_FRAME_RATE, /**< @ref MMAL_PARAMETER_FRAME_RATE_T */ -+ MMAL_PARAMETER_USE_STC, /**< @ref MMAL_PARAMETER_CAMERA_STC_MODE_T */ -+ MMAL_PARAMETER_CAMERA_INFO, /**< @ref MMAL_PARAMETER_CAMERA_INFO_T */ -+ MMAL_PARAMETER_VIDEO_STABILISATION, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_FACE_TRACK_RESULTS, /**< @ref MMAL_PARAMETER_FACE_TRACK_RESULTS_T */ -+ MMAL_PARAMETER_ENABLE_RAW_CAPTURE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ -+ /* 0x20 */ -+ MMAL_PARAMETER_DPF_FILE, /**< @ref MMAL_PARAMETER_URI_T */ -+ MMAL_PARAMETER_ENABLE_DPF_FILE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_DPF_FAIL_IS_FATAL, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_CAPTURE_MODE, /**< @ref MMAL_PARAMETER_CAPTUREMODE_T */ -+ MMAL_PARAMETER_FOCUS_REGIONS, /**< @ref MMAL_PARAMETER_FOCUS_REGIONS_T */ -+ MMAL_PARAMETER_INPUT_CROP, /**< @ref MMAL_PARAMETER_INPUT_CROP_T */ -+ MMAL_PARAMETER_SENSOR_INFORMATION, /**< @ref MMAL_PARAMETER_SENSOR_INFORMATION_T */ -+ MMAL_PARAMETER_FLASH_SELECT, /**< @ref MMAL_PARAMETER_FLASH_SELECT_T */ -+ MMAL_PARAMETER_FIELD_OF_VIEW, /**< @ref MMAL_PARAMETER_FIELD_OF_VIEW_T */ -+ MMAL_PARAMETER_HIGH_DYNAMIC_RANGE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_DYNAMIC_RANGE_COMPRESSION, /**< @ref MMAL_PARAMETER_DRC_T */ -+ MMAL_PARAMETER_ALGORITHM_CONTROL, /**< @ref MMAL_PARAMETER_ALGORITHM_CONTROL_T */ -+ MMAL_PARAMETER_SHARPNESS, /**< @ref MMAL_PARAMETER_RATIONAL_T */ -+ MMAL_PARAMETER_CONTRAST, /**< @ref MMAL_PARAMETER_RATIONAL_T */ -+ MMAL_PARAMETER_BRIGHTNESS, /**< @ref MMAL_PARAMETER_RATIONAL_T */ -+ MMAL_PARAMETER_SATURATION, /**< @ref MMAL_PARAMETER_RATIONAL_T */ -+ -+ /* 0x30 */ -+ MMAL_PARAMETER_ISO, /**< @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_ANTISHAKE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ -+ /** @ref MMAL_PARAMETER_IMAGEFX_PARAMETERS_T */ -+ MMAL_PARAMETER_IMAGE_EFFECT_PARAMETERS, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_CAMERA_BURST_CAPTURE, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_CAMERA_MIN_ISO, -+ -+ /** @ref MMAL_PARAMETER_CAMERA_USE_CASE_T */ -+ MMAL_PARAMETER_CAMERA_USE_CASE, -+ -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_CAPTURE_STATS_PASS, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_CAMERA_CUSTOM_SENSOR_CONFIG, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_ENABLE_REGISTER_FILE, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_REGISTER_FAIL_IS_FATAL, -+ -+ /** @ref MMAL_PARAMETER_CONFIGFILE_T */ -+ MMAL_PARAMETER_CONFIGFILE_REGISTERS, -+ -+ /** @ref MMAL_PARAMETER_CONFIGFILE_CHUNK_T */ -+ MMAL_PARAMETER_CONFIGFILE_CHUNK_REGISTERS, -+ MMAL_PARAMETER_JPEG_ATTACH_LOG, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_ZERO_SHUTTER_LAG, /**< @ref MMAL_PARAMETER_ZEROSHUTTERLAG_T */ -+ MMAL_PARAMETER_FPS_RANGE, /**< @ref MMAL_PARAMETER_FPS_RANGE_T */ -+ MMAL_PARAMETER_CAPTURE_EXPOSURE_COMP, /**< @ref MMAL_PARAMETER_INT32_T */ -+ -+ /* 0x40 */ -+ MMAL_PARAMETER_SW_SHARPEN_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_FLASH_REQUIRED, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_SW_SATURATION_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_SHUTTER_SPEED, /**< Takes a @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_CUSTOM_AWB_GAINS, /**< Takes a @ref MMAL_PARAMETER_AWB_GAINS_T */ -+}; -+ -+struct mmal_parameter_rational { -+ s32 num; /**< Numerator */ -+ s32 den; /**< Denominator */ -+}; -+ -+enum mmal_parameter_camera_config_timestamp_mode { -+ MMAL_PARAM_TIMESTAMP_MODE_ZERO = 0, /* Always timestamp frames as 0 */ -+ MMAL_PARAM_TIMESTAMP_MODE_RAW_STC, /* Use the raw STC value -+ * for the frame timestamp -+ */ -+ MMAL_PARAM_TIMESTAMP_MODE_RESET_STC, /* Use the STC timestamp -+ * but subtract the -+ * timestamp of the first -+ * frame sent to give a -+ * zero based timestamp. -+ */ -+}; -+ -+struct mmal_parameter_fps_range { -+ /**< Low end of the permitted framerate range */ -+ struct mmal_parameter_rational fps_low; -+ /**< High end of the permitted framerate range */ -+ struct mmal_parameter_rational fps_high; -+}; -+ -+ -+/* camera configuration parameter */ -+struct mmal_parameter_camera_config { -+ /* Parameters for setting up the image pools */ -+ u32 max_stills_w; /* Max size of stills capture */ -+ u32 max_stills_h; -+ u32 stills_yuv422; /* Allow YUV422 stills capture */ -+ u32 one_shot_stills; /* Continuous or one shot stills captures. */ -+ -+ u32 max_preview_video_w; /* Max size of the preview or video -+ * capture frames -+ */ -+ u32 max_preview_video_h; -+ u32 num_preview_video_frames; -+ -+ /** Sets the height of the circular buffer for stills capture. */ -+ u32 stills_capture_circular_buffer_height; -+ -+ /** Allows preview/encode to resume as fast as possible after the stills -+ * input frame has been received, and then processes the still frame in -+ * the background whilst preview/encode has resumed. -+ * Actual mode is controlled by MMAL_PARAMETER_CAPTURE_MODE. -+ */ -+ u32 fast_preview_resume; -+ -+ /** Selects algorithm for timestamping frames if -+ * there is no clock component connected. -+ * enum mmal_parameter_camera_config_timestamp_mode -+ */ -+ s32 use_stc_timestamp; -+}; -+ -+ -+enum mmal_parameter_exposuremode { -+ MMAL_PARAM_EXPOSUREMODE_OFF, -+ MMAL_PARAM_EXPOSUREMODE_AUTO, -+ MMAL_PARAM_EXPOSUREMODE_NIGHT, -+ MMAL_PARAM_EXPOSUREMODE_NIGHTPREVIEW, -+ MMAL_PARAM_EXPOSUREMODE_BACKLIGHT, -+ MMAL_PARAM_EXPOSUREMODE_SPOTLIGHT, -+ MMAL_PARAM_EXPOSUREMODE_SPORTS, -+ MMAL_PARAM_EXPOSUREMODE_SNOW, -+ MMAL_PARAM_EXPOSUREMODE_BEACH, -+ MMAL_PARAM_EXPOSUREMODE_VERYLONG, -+ MMAL_PARAM_EXPOSUREMODE_FIXEDFPS, -+ MMAL_PARAM_EXPOSUREMODE_ANTISHAKE, -+ MMAL_PARAM_EXPOSUREMODE_FIREWORKS, -+}; -+ -+enum mmal_parameter_exposuremeteringmode { -+ MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE, -+ MMAL_PARAM_EXPOSUREMETERINGMODE_SPOT, -+ MMAL_PARAM_EXPOSUREMETERINGMODE_BACKLIT, -+ MMAL_PARAM_EXPOSUREMETERINGMODE_MATRIX, -+}; -+ -+enum mmal_parameter_awbmode { -+ MMAL_PARAM_AWBMODE_OFF, -+ MMAL_PARAM_AWBMODE_AUTO, -+ MMAL_PARAM_AWBMODE_SUNLIGHT, -+ MMAL_PARAM_AWBMODE_CLOUDY, -+ MMAL_PARAM_AWBMODE_SHADE, -+ MMAL_PARAM_AWBMODE_TUNGSTEN, -+ MMAL_PARAM_AWBMODE_FLUORESCENT, -+ MMAL_PARAM_AWBMODE_INCANDESCENT, -+ MMAL_PARAM_AWBMODE_FLASH, -+ MMAL_PARAM_AWBMODE_HORIZON, -+}; -+ -+enum mmal_parameter_imagefx { -+ MMAL_PARAM_IMAGEFX_NONE, -+ MMAL_PARAM_IMAGEFX_NEGATIVE, -+ MMAL_PARAM_IMAGEFX_SOLARIZE, -+ MMAL_PARAM_IMAGEFX_POSTERIZE, -+ MMAL_PARAM_IMAGEFX_WHITEBOARD, -+ MMAL_PARAM_IMAGEFX_BLACKBOARD, -+ MMAL_PARAM_IMAGEFX_SKETCH, -+ MMAL_PARAM_IMAGEFX_DENOISE, -+ MMAL_PARAM_IMAGEFX_EMBOSS, -+ MMAL_PARAM_IMAGEFX_OILPAINT, -+ MMAL_PARAM_IMAGEFX_HATCH, -+ MMAL_PARAM_IMAGEFX_GPEN, -+ MMAL_PARAM_IMAGEFX_PASTEL, -+ MMAL_PARAM_IMAGEFX_WATERCOLOUR, -+ MMAL_PARAM_IMAGEFX_FILM, -+ MMAL_PARAM_IMAGEFX_BLUR, -+ MMAL_PARAM_IMAGEFX_SATURATION, -+ MMAL_PARAM_IMAGEFX_COLOURSWAP, -+ MMAL_PARAM_IMAGEFX_WASHEDOUT, -+ MMAL_PARAM_IMAGEFX_POSTERISE, -+ MMAL_PARAM_IMAGEFX_COLOURPOINT, -+ MMAL_PARAM_IMAGEFX_COLOURBALANCE, -+ MMAL_PARAM_IMAGEFX_CARTOON, -+}; -+ -+enum MMAL_PARAM_FLICKERAVOID_T { -+ MMAL_PARAM_FLICKERAVOID_OFF, -+ MMAL_PARAM_FLICKERAVOID_AUTO, -+ MMAL_PARAM_FLICKERAVOID_50HZ, -+ MMAL_PARAM_FLICKERAVOID_60HZ, -+ MMAL_PARAM_FLICKERAVOID_MAX = 0x7FFFFFFF -+}; -+ -+struct mmal_parameter_awbgains { -+ struct mmal_parameter_rational r_gain; /**< Red gain */ -+ struct mmal_parameter_rational b_gain; /**< Blue gain */ -+}; -+ -+/** Manner of video rate control */ -+enum mmal_parameter_rate_control_mode { -+ MMAL_VIDEO_RATECONTROL_DEFAULT, -+ MMAL_VIDEO_RATECONTROL_VARIABLE, -+ MMAL_VIDEO_RATECONTROL_CONSTANT, -+ MMAL_VIDEO_RATECONTROL_VARIABLE_SKIP_FRAMES, -+ MMAL_VIDEO_RATECONTROL_CONSTANT_SKIP_FRAMES -+}; -+ -+enum mmal_video_profile { -+ MMAL_VIDEO_PROFILE_H263_BASELINE, -+ MMAL_VIDEO_PROFILE_H263_H320CODING, -+ MMAL_VIDEO_PROFILE_H263_BACKWARDCOMPATIBLE, -+ MMAL_VIDEO_PROFILE_H263_ISWV2, -+ MMAL_VIDEO_PROFILE_H263_ISWV3, -+ MMAL_VIDEO_PROFILE_H263_HIGHCOMPRESSION, -+ MMAL_VIDEO_PROFILE_H263_INTERNET, -+ MMAL_VIDEO_PROFILE_H263_INTERLACE, -+ MMAL_VIDEO_PROFILE_H263_HIGHLATENCY, -+ MMAL_VIDEO_PROFILE_MP4V_SIMPLE, -+ MMAL_VIDEO_PROFILE_MP4V_SIMPLESCALABLE, -+ MMAL_VIDEO_PROFILE_MP4V_CORE, -+ MMAL_VIDEO_PROFILE_MP4V_MAIN, -+ MMAL_VIDEO_PROFILE_MP4V_NBIT, -+ MMAL_VIDEO_PROFILE_MP4V_SCALABLETEXTURE, -+ MMAL_VIDEO_PROFILE_MP4V_SIMPLEFACE, -+ MMAL_VIDEO_PROFILE_MP4V_SIMPLEFBA, -+ MMAL_VIDEO_PROFILE_MP4V_BASICANIMATED, -+ MMAL_VIDEO_PROFILE_MP4V_HYBRID, -+ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDREALTIME, -+ MMAL_VIDEO_PROFILE_MP4V_CORESCALABLE, -+ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDCODING, -+ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDCORE, -+ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDSCALABLE, -+ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDSIMPLE, -+ MMAL_VIDEO_PROFILE_H264_BASELINE, -+ MMAL_VIDEO_PROFILE_H264_MAIN, -+ MMAL_VIDEO_PROFILE_H264_EXTENDED, -+ MMAL_VIDEO_PROFILE_H264_HIGH, -+ MMAL_VIDEO_PROFILE_H264_HIGH10, -+ MMAL_VIDEO_PROFILE_H264_HIGH422, -+ MMAL_VIDEO_PROFILE_H264_HIGH444, -+ MMAL_VIDEO_PROFILE_H264_CONSTRAINED_BASELINE, -+ MMAL_VIDEO_PROFILE_DUMMY = 0x7FFFFFFF -+}; -+ -+enum mmal_video_level { -+ MMAL_VIDEO_LEVEL_H263_10, -+ MMAL_VIDEO_LEVEL_H263_20, -+ MMAL_VIDEO_LEVEL_H263_30, -+ MMAL_VIDEO_LEVEL_H263_40, -+ MMAL_VIDEO_LEVEL_H263_45, -+ MMAL_VIDEO_LEVEL_H263_50, -+ MMAL_VIDEO_LEVEL_H263_60, -+ MMAL_VIDEO_LEVEL_H263_70, -+ MMAL_VIDEO_LEVEL_MP4V_0, -+ MMAL_VIDEO_LEVEL_MP4V_0b, -+ MMAL_VIDEO_LEVEL_MP4V_1, -+ MMAL_VIDEO_LEVEL_MP4V_2, -+ MMAL_VIDEO_LEVEL_MP4V_3, -+ MMAL_VIDEO_LEVEL_MP4V_4, -+ MMAL_VIDEO_LEVEL_MP4V_4a, -+ MMAL_VIDEO_LEVEL_MP4V_5, -+ MMAL_VIDEO_LEVEL_MP4V_6, -+ MMAL_VIDEO_LEVEL_H264_1, -+ MMAL_VIDEO_LEVEL_H264_1b, -+ MMAL_VIDEO_LEVEL_H264_11, -+ MMAL_VIDEO_LEVEL_H264_12, -+ MMAL_VIDEO_LEVEL_H264_13, -+ MMAL_VIDEO_LEVEL_H264_2, -+ MMAL_VIDEO_LEVEL_H264_21, -+ MMAL_VIDEO_LEVEL_H264_22, -+ MMAL_VIDEO_LEVEL_H264_3, -+ MMAL_VIDEO_LEVEL_H264_31, -+ MMAL_VIDEO_LEVEL_H264_32, -+ MMAL_VIDEO_LEVEL_H264_4, -+ MMAL_VIDEO_LEVEL_H264_41, -+ MMAL_VIDEO_LEVEL_H264_42, -+ MMAL_VIDEO_LEVEL_H264_5, -+ MMAL_VIDEO_LEVEL_H264_51, -+ MMAL_VIDEO_LEVEL_DUMMY = 0x7FFFFFFF -+}; -+ -+struct mmal_parameter_video_profile { -+ enum mmal_video_profile profile; -+ enum mmal_video_level level; -+}; -+ -+/* video parameters */ -+ -+enum mmal_parameter_video_type { -+ /** @ref MMAL_DISPLAYREGION_T */ -+ MMAL_PARAMETER_DISPLAYREGION = MMAL_PARAMETER_GROUP_VIDEO, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_PROFILE_T */ -+ MMAL_PARAMETER_SUPPORTED_PROFILES, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_PROFILE_T */ -+ MMAL_PARAMETER_PROFILE, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_INTRAPERIOD, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_RATECONTROL_T */ -+ MMAL_PARAMETER_RATECONTROL, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_NALUNITFORMAT_T */ -+ MMAL_PARAMETER_NALUNITFORMAT, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_MINIMISE_FRAGMENTATION, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T. -+ * Setting the value to zero resets to the default (one slice per frame). -+ */ -+ MMAL_PARAMETER_MB_ROWS_PER_SLICE, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_LEVEL_EXTENSION_T */ -+ MMAL_PARAMETER_VIDEO_LEVEL_EXTENSION, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_EEDE_ENABLE_T */ -+ MMAL_PARAMETER_VIDEO_EEDE_ENABLE, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_EEDE_LOSSRATE_T */ -+ MMAL_PARAMETER_VIDEO_EEDE_LOSSRATE, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T. Request an I-frame. */ -+ MMAL_PARAMETER_VIDEO_REQUEST_I_FRAME, -+ /** @ref MMAL_PARAMETER_VIDEO_INTRA_REFRESH_T */ -+ MMAL_PARAMETER_VIDEO_INTRA_REFRESH, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ -+ MMAL_PARAMETER_VIDEO_IMMUTABLE_INPUT, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T. Run-time bit rate control */ -+ MMAL_PARAMETER_VIDEO_BIT_RATE, -+ -+ /** @ref MMAL_PARAMETER_FRAME_RATE_T */ -+ MMAL_PARAMETER_VIDEO_FRAME_RATE, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_MIN_QUANT, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_MAX_QUANT, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_ENCODE_RC_MODEL_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_RC_MODEL, -+ -+ MMAL_PARAMETER_EXTRA_BUFFERS, /**< @ref MMAL_PARAMETER_UINT32_T. */ -+ /** @ref MMAL_PARAMETER_UINT32_T. -+ * Changing this parameter from the default can reduce frame rate -+ * because image buffers need to be re-pitched. -+ */ -+ MMAL_PARAMETER_VIDEO_ALIGN_HORIZ, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T. -+ * Changing this parameter from the default can reduce frame rate -+ * because image buffers need to be re-pitched. -+ */ -+ MMAL_PARAMETER_VIDEO_ALIGN_VERT, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ -+ MMAL_PARAMETER_VIDEO_DROPPABLE_PFRAMES, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_INITIAL_QUANT, -+ -+ /**< @ref MMAL_PARAMETER_UINT32_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_QP_P, -+ -+ /**< @ref MMAL_PARAMETER_UINT32_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_RC_SLICE_DQUANT, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T */ -+ MMAL_PARAMETER_VIDEO_ENCODE_FRAME_LIMIT_BITS, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_PEAK_RATE, -+ -+ /* H264 specific parameters */ -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_H264_DISABLE_CABAC, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_LATENCY, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_H264_AU_DELIMITERS, -+ -+ /** @ref MMAL_PARAMETER_UINT32_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_H264_DEBLOCK_IDC, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_ENCODER_H264_MB_INTRA_MODES_T. */ -+ MMAL_PARAMETER_VIDEO_ENCODE_H264_MB_INTRA_MODE, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_ENCODE_HEADER_ON_OPEN, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_ENCODE_PRECODE_FOR_QP, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_DRM_INIT_INFO_T. */ -+ MMAL_PARAMETER_VIDEO_DRM_INIT_INFO, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_TIMESTAMP_FIFO, -+ -+ /** @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_DECODE_ERROR_CONCEALMENT, -+ -+ /** @ref MMAL_PARAMETER_VIDEO_DRM_PROTECT_BUFFER_T. */ -+ MMAL_PARAMETER_VIDEO_DRM_PROTECT_BUFFER, -+ -+ /** @ref MMAL_PARAMETER_BYTES_T */ -+ MMAL_PARAMETER_VIDEO_DECODE_CONFIG_VD3, -+ -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_ENCODE_H264_VCL_HRD_PARAMETERS, -+ -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_DELAY_HRD_FLAG, -+ -+ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ -+ MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER -+}; -+ -+/** Valid mirror modes */ -+enum mmal_parameter_mirror { -+ MMAL_PARAM_MIRROR_NONE, -+ MMAL_PARAM_MIRROR_VERTICAL, -+ MMAL_PARAM_MIRROR_HORIZONTAL, -+ MMAL_PARAM_MIRROR_BOTH, -+}; -+ -+enum mmal_parameter_displaytransform { -+ MMAL_DISPLAY_ROT0 = 0, -+ MMAL_DISPLAY_MIRROR_ROT0 = 1, -+ MMAL_DISPLAY_MIRROR_ROT180 = 2, -+ MMAL_DISPLAY_ROT180 = 3, -+ MMAL_DISPLAY_MIRROR_ROT90 = 4, -+ MMAL_DISPLAY_ROT270 = 5, -+ MMAL_DISPLAY_ROT90 = 6, -+ MMAL_DISPLAY_MIRROR_ROT270 = 7, -+}; -+ -+enum mmal_parameter_displaymode { -+ MMAL_DISPLAY_MODE_FILL = 0, -+ MMAL_DISPLAY_MODE_LETTERBOX = 1, -+}; -+ -+enum mmal_parameter_displayset { -+ MMAL_DISPLAY_SET_NONE = 0, -+ MMAL_DISPLAY_SET_NUM = 1, -+ MMAL_DISPLAY_SET_FULLSCREEN = 2, -+ MMAL_DISPLAY_SET_TRANSFORM = 4, -+ MMAL_DISPLAY_SET_DEST_RECT = 8, -+ MMAL_DISPLAY_SET_SRC_RECT = 0x10, -+ MMAL_DISPLAY_SET_MODE = 0x20, -+ MMAL_DISPLAY_SET_PIXEL = 0x40, -+ MMAL_DISPLAY_SET_NOASPECT = 0x80, -+ MMAL_DISPLAY_SET_LAYER = 0x100, -+ MMAL_DISPLAY_SET_COPYPROTECT = 0x200, -+ MMAL_DISPLAY_SET_ALPHA = 0x400, -+}; -+ -+struct mmal_parameter_displayregion { -+ /** Bitfield that indicates which fields are set and should be -+ * used. All other fields will maintain their current value. -+ * \ref MMAL_DISPLAYSET_T defines the bits that can be -+ * combined. -+ */ -+ u32 set; -+ -+ /** Describes the display output device, with 0 typically -+ * being a directly connected LCD display. The actual values -+ * will depend on the hardware. Code using hard-wired numbers -+ * (e.g. 2) is certain to fail. -+ */ -+ -+ u32 display_num; -+ /** Indicates that we are using the full device screen area, -+ * rather than a window of the display. If zero, then -+ * dest_rect is used to specify a region of the display to -+ * use. -+ */ -+ -+ s32 fullscreen; -+ /** Indicates any rotation or flipping used to map frames onto -+ * the natural display orientation. -+ */ -+ u32 transform; /* enum mmal_parameter_displaytransform */ -+ -+ /** Where to display the frame within the screen, if -+ * fullscreen is zero. -+ */ -+ struct vchiq_mmal_rect dest_rect; -+ -+ /** Indicates which area of the frame to display. If all -+ * values are zero, the whole frame will be used. -+ */ -+ struct vchiq_mmal_rect src_rect; -+ -+ /** If set to non-zero, indicates that any display scaling -+ * should disregard the aspect ratio of the frame region being -+ * displayed. -+ */ -+ s32 noaspect; -+ -+ /** Indicates how the image should be scaled to fit the -+ * display. \code MMAL_DISPLAY_MODE_FILL \endcode indicates -+ * that the image should fill the screen by potentially -+ * cropping the frames. Setting \code mode \endcode to \code -+ * MMAL_DISPLAY_MODE_LETTERBOX \endcode indicates that all the -+ * source region should be displayed and black bars added if -+ * necessary. -+ */ -+ u32 mode; /* enum mmal_parameter_displaymode */ -+ -+ /** If non-zero, defines the width of a source pixel relative -+ * to \code pixel_y \endcode. If zero, then pixels default to -+ * being square. -+ */ -+ u32 pixel_x; -+ -+ /** If non-zero, defines the height of a source pixel relative -+ * to \code pixel_x \endcode. If zero, then pixels default to -+ * being square. -+ */ -+ u32 pixel_y; -+ -+ /** Sets the relative depth of the images, with greater values -+ * being in front of smaller values. -+ */ -+ u32 layer; -+ -+ /** Set to non-zero to ensure copy protection is used on -+ * output. -+ */ -+ s32 copyprotect_required; -+ -+ /** Level of opacity of the layer, where zero is fully -+ * transparent and 255 is fully opaque. -+ */ -+ u32 alpha; -+}; -+ -+#define MMAL_MAX_IMAGEFX_PARAMETERS 5 -+ -+struct mmal_parameter_imagefx_parameters { -+ enum mmal_parameter_imagefx effect; -+ u32 num_effect_params; -+ u32 effect_parameter[MMAL_MAX_IMAGEFX_PARAMETERS]; -+}; -+ -+#define MMAL_PARAMETER_CAMERA_INFO_MAX_CAMERAS 4 -+#define MMAL_PARAMETER_CAMERA_INFO_MAX_FLASHES 2 -+#define MMAL_PARAMETER_CAMERA_INFO_MAX_STR_LEN 16 -+ -+struct mmal_parameter_camera_info_camera_t { -+ u32 port_id; -+ u32 max_width; -+ u32 max_height; -+ u32 lens_present; -+ u8 camera_name[MMAL_PARAMETER_CAMERA_INFO_MAX_STR_LEN]; -+}; -+ -+enum mmal_parameter_camera_info_flash_type_t { -+ /* Make values explicit to ensure they match values in config ini */ -+ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_XENON = 0, -+ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_LED = 1, -+ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_OTHER = 2, -+ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_MAX = 0x7FFFFFFF -+}; -+ -+struct mmal_parameter_camera_info_flash_t { -+ enum mmal_parameter_camera_info_flash_type_t flash_type; -+}; -+ -+struct mmal_parameter_camera_info_t { -+ u32 num_cameras; -+ u32 num_flashes; -+ struct mmal_parameter_camera_info_camera_t -+ cameras[MMAL_PARAMETER_CAMERA_INFO_MAX_CAMERAS]; -+ struct mmal_parameter_camera_info_flash_t -+ flashes[MMAL_PARAMETER_CAMERA_INFO_MAX_FLASHES]; -+}; ---- /dev/null -+++ b/drivers/media/platform/bcm2835/mmal-vchiq.c -@@ -0,0 +1,1916 @@ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive -+ * for more details. -+ * -+ * Authors: Vincent Sanders -+ * Dave Stevenson -+ * Simon Mellor -+ * Luke Diamand -+ * -+ * V4L2 driver MMAL vchiq interface code -+ */ -+ -+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "mmal-common.h" -+#include "mmal-vchiq.h" -+#include "mmal-msg.h" -+ -+#define USE_VCHIQ_ARM -+#include "interface/vchi/vchi.h" -+ -+/* maximum number of components supported */ -+#define VCHIQ_MMAL_MAX_COMPONENTS 4 -+ -+/*#define FULL_MSG_DUMP 1*/ -+ -+#ifdef DEBUG -+static const char *const msg_type_names[] = { -+ "UNKNOWN", -+ "QUIT", -+ "SERVICE_CLOSED", -+ "GET_VERSION", -+ "COMPONENT_CREATE", -+ "COMPONENT_DESTROY", -+ "COMPONENT_ENABLE", -+ "COMPONENT_DISABLE", -+ "PORT_INFO_GET", -+ "PORT_INFO_SET", -+ "PORT_ACTION", -+ "BUFFER_FROM_HOST", -+ "BUFFER_TO_HOST", -+ "GET_STATS", -+ "PORT_PARAMETER_SET", -+ "PORT_PARAMETER_GET", -+ "EVENT_TO_HOST", -+ "GET_CORE_STATS_FOR_PORT", -+ "OPAQUE_ALLOCATOR", -+ "CONSUME_MEM", -+ "LMK", -+ "OPAQUE_ALLOCATOR_DESC", -+ "DRM_GET_LHS32", -+ "DRM_GET_TIME", -+ "BUFFER_FROM_HOST_ZEROLEN", -+ "PORT_FLUSH", -+ "HOST_LOG", -+}; -+#endif -+ -+static const char *const port_action_type_names[] = { -+ "UNKNOWN", -+ "ENABLE", -+ "DISABLE", -+ "FLUSH", -+ "CONNECT", -+ "DISCONNECT", -+ "SET_REQUIREMENTS", -+}; -+ -+#if defined(DEBUG) -+#if defined(FULL_MSG_DUMP) -+#define DBG_DUMP_MSG(MSG, MSG_LEN, TITLE) \ -+ do { \ -+ pr_debug(TITLE" type:%s(%d) length:%d\n", \ -+ msg_type_names[(MSG)->h.type], \ -+ (MSG)->h.type, (MSG_LEN)); \ -+ print_hex_dump(KERN_DEBUG, "<h.type], \ -+ (MSG)->h.type, (MSG_LEN)); \ -+ } -+#endif -+#else -+#define DBG_DUMP_MSG(MSG, MSG_LEN, TITLE) -+#endif -+ -+/* normal message context */ -+struct mmal_msg_context { -+ union { -+ struct { -+ /* work struct for defered callback - must come first */ -+ struct work_struct work; -+ /* mmal instance */ -+ struct vchiq_mmal_instance *instance; -+ /* mmal port */ -+ struct vchiq_mmal_port *port; -+ /* actual buffer used to store bulk reply */ -+ struct mmal_buffer *buffer; -+ /* amount of buffer used */ -+ unsigned long buffer_used; -+ /* MMAL buffer flags */ -+ u32 mmal_flags; -+ /* Presentation and Decode timestamps */ -+ s64 pts; -+ s64 dts; -+ -+ int status; /* context status */ -+ -+ } bulk; /* bulk data */ -+ -+ struct { -+ /* message handle to release */ -+ VCHI_HELD_MSG_T msg_handle; -+ /* pointer to received message */ -+ struct mmal_msg *msg; -+ /* received message length */ -+ u32 msg_len; -+ /* completion upon reply */ -+ struct completion cmplt; -+ } sync; /* synchronous response */ -+ } u; -+ -+}; -+ -+struct vchiq_mmal_instance { -+ VCHI_SERVICE_HANDLE_T handle; -+ -+ /* ensure serialised access to service */ -+ struct mutex vchiq_mutex; -+ -+ /* ensure serialised access to bulk operations */ -+ struct mutex bulk_mutex; -+ -+ /* vmalloc page to receive scratch bulk xfers into */ -+ void *bulk_scratch; -+ -+ /* component to use next */ -+ int component_idx; -+ struct vchiq_mmal_component component[VCHIQ_MMAL_MAX_COMPONENTS]; -+}; -+ -+static struct mmal_msg_context *get_msg_context(struct vchiq_mmal_instance -+ *instance) -+{ -+ struct mmal_msg_context *msg_context; -+ -+ /* todo: should this be allocated from a pool to avoid kmalloc */ -+ msg_context = kmalloc(sizeof(*msg_context), GFP_KERNEL); -+ memset(msg_context, 0, sizeof(*msg_context)); -+ -+ return msg_context; -+} -+ -+static void release_msg_context(struct mmal_msg_context *msg_context) -+{ -+ kfree(msg_context); -+} -+ -+/* deals with receipt of event to host message */ -+static void event_to_host_cb(struct vchiq_mmal_instance *instance, -+ struct mmal_msg *msg, u32 msg_len) -+{ -+ pr_debug("unhandled event\n"); -+ pr_debug("component:%p port type:%d num:%d cmd:0x%x length:%d\n", -+ msg->u.event_to_host.client_component, -+ msg->u.event_to_host.port_type, -+ msg->u.event_to_host.port_num, -+ msg->u.event_to_host.cmd, msg->u.event_to_host.length); -+} -+ -+/* workqueue scheduled callback -+ * -+ * we do this because it is important we do not call any other vchiq -+ * sync calls from witin the message delivery thread -+ */ -+static void buffer_work_cb(struct work_struct *work) -+{ -+ struct mmal_msg_context *msg_context = (struct mmal_msg_context *)work; -+ -+ msg_context->u.bulk.port->buffer_cb(msg_context->u.bulk.instance, -+ msg_context->u.bulk.port, -+ msg_context->u.bulk.status, -+ msg_context->u.bulk.buffer, -+ msg_context->u.bulk.buffer_used, -+ msg_context->u.bulk.mmal_flags, -+ msg_context->u.bulk.dts, -+ msg_context->u.bulk.pts); -+ -+ /* release message context */ -+ release_msg_context(msg_context); -+} -+ -+/* enqueue a bulk receive for a given message context */ -+static int bulk_receive(struct vchiq_mmal_instance *instance, -+ struct mmal_msg *msg, -+ struct mmal_msg_context *msg_context) -+{ -+ unsigned long rd_len; -+ unsigned long flags = 0; -+ int ret; -+ -+ /* bulk mutex stops other bulk operations while we have a -+ * receive in progress - released in callback -+ */ -+ ret = mutex_lock_interruptible(&instance->bulk_mutex); -+ if (ret != 0) -+ return ret; -+ -+ rd_len = msg->u.buffer_from_host.buffer_header.length; -+ -+ /* take buffer from queue */ -+ spin_lock_irqsave(&msg_context->u.bulk.port->slock, flags); -+ if (list_empty(&msg_context->u.bulk.port->buffers)) { -+ spin_unlock_irqrestore(&msg_context->u.bulk.port->slock, flags); -+ pr_err("buffer list empty trying to submit bulk receive\n"); -+ -+ /* todo: this is a serious error, we should never have -+ * commited a buffer_to_host operation to the mmal -+ * port without the buffer to back it up (underflow -+ * handling) and there is no obvious way to deal with -+ * this - how is the mmal servie going to react when -+ * we fail to do the xfer and reschedule a buffer when -+ * it arrives? perhaps a starved flag to indicate a -+ * waiting bulk receive? -+ */ -+ -+ mutex_unlock(&instance->bulk_mutex); -+ -+ return -EINVAL; -+ } -+ -+ msg_context->u.bulk.buffer = -+ list_entry(msg_context->u.bulk.port->buffers.next, -+ struct mmal_buffer, list); -+ list_del(&msg_context->u.bulk.buffer->list); -+ -+ spin_unlock_irqrestore(&msg_context->u.bulk.port->slock, flags); -+ -+ /* ensure we do not overrun the available buffer */ -+ if (rd_len > msg_context->u.bulk.buffer->buffer_size) { -+ rd_len = msg_context->u.bulk.buffer->buffer_size; -+ pr_warn("short read as not enough receive buffer space\n"); -+ /* todo: is this the correct response, what happens to -+ * the rest of the message data? -+ */ -+ } -+ -+ /* store length */ -+ msg_context->u.bulk.buffer_used = rd_len; -+ msg_context->u.bulk.mmal_flags = -+ msg->u.buffer_from_host.buffer_header.flags; -+ msg_context->u.bulk.dts = msg->u.buffer_from_host.buffer_header.dts; -+ msg_context->u.bulk.pts = msg->u.buffer_from_host.buffer_header.pts; -+ -+ // only need to flush L1 cache here, as VCHIQ takes care of the L2 -+ // cache. -+ __cpuc_flush_dcache_area(msg_context->u.bulk.buffer->buffer, rd_len); -+ -+ /* queue the bulk submission */ -+ vchi_service_use(instance->handle); -+ ret = vchi_bulk_queue_receive(instance->handle, -+ msg_context->u.bulk.buffer->buffer, -+ /* Actual receive needs to be a multiple -+ * of 4 bytes -+ */ -+ (rd_len + 3) & ~3, -+ VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | -+ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, -+ msg_context); -+ -+ vchi_service_release(instance->handle); -+ -+ if (ret != 0) { -+ /* callback will not be clearing the mutex */ -+ mutex_unlock(&instance->bulk_mutex); -+ } -+ -+ return ret; -+} -+ -+/* enque a dummy bulk receive for a given message context */ -+static int dummy_bulk_receive(struct vchiq_mmal_instance *instance, -+ struct mmal_msg_context *msg_context) -+{ -+ int ret; -+ -+ /* bulk mutex stops other bulk operations while we have a -+ * receive in progress - released in callback -+ */ -+ ret = mutex_lock_interruptible(&instance->bulk_mutex); -+ if (ret != 0) -+ return ret; -+ -+ /* zero length indicates this was a dummy transfer */ -+ msg_context->u.bulk.buffer_used = 0; -+ -+ /* queue the bulk submission */ -+ vchi_service_use(instance->handle); -+ -+ ret = vchi_bulk_queue_receive(instance->handle, -+ instance->bulk_scratch, -+ 8, -+ VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | -+ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, -+ msg_context); -+ -+ vchi_service_release(instance->handle); -+ -+ if (ret != 0) { -+ /* callback will not be clearing the mutex */ -+ mutex_unlock(&instance->bulk_mutex); -+ } -+ -+ return ret; -+} -+ -+/* data in message, memcpy from packet into output buffer */ -+static int inline_receive(struct vchiq_mmal_instance *instance, -+ struct mmal_msg *msg, -+ struct mmal_msg_context *msg_context) -+{ -+ unsigned long flags = 0; -+ -+ /* take buffer from queue */ -+ spin_lock_irqsave(&msg_context->u.bulk.port->slock, flags); -+ if (list_empty(&msg_context->u.bulk.port->buffers)) { -+ spin_unlock_irqrestore(&msg_context->u.bulk.port->slock, flags); -+ pr_err("buffer list empty trying to receive inline\n"); -+ -+ /* todo: this is a serious error, we should never have -+ * commited a buffer_to_host operation to the mmal -+ * port without the buffer to back it up (with -+ * underflow handling) and there is no obvious way to -+ * deal with this. Less bad than the bulk case as we -+ * can just drop this on the floor but...unhelpful -+ */ -+ return -EINVAL; -+ } -+ -+ msg_context->u.bulk.buffer = -+ list_entry(msg_context->u.bulk.port->buffers.next, -+ struct mmal_buffer, list); -+ list_del(&msg_context->u.bulk.buffer->list); -+ -+ spin_unlock_irqrestore(&msg_context->u.bulk.port->slock, flags); -+ -+ memcpy(msg_context->u.bulk.buffer->buffer, -+ msg->u.buffer_from_host.short_data, -+ msg->u.buffer_from_host.payload_in_message); -+ -+ msg_context->u.bulk.buffer_used = -+ msg->u.buffer_from_host.payload_in_message; -+ -+ return 0; -+} -+ -+/* queue the buffer availability with MMAL_MSG_TYPE_BUFFER_FROM_HOST */ -+static int -+buffer_from_host(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, struct mmal_buffer *buf) -+{ -+ struct mmal_msg_context *msg_context; -+ struct mmal_msg m; -+ int ret; -+ -+ pr_debug("instance:%p buffer:%p\n", instance->handle, buf); -+ -+ /* bulk mutex stops other bulk operations while we -+ * have a receive in progress -+ */ -+ if (mutex_lock_interruptible(&instance->bulk_mutex)) -+ return -EINTR; -+ -+ /* get context */ -+ msg_context = get_msg_context(instance); -+ if (msg_context == NULL) -+ return -ENOMEM; -+ -+ /* store bulk message context for when data arrives */ -+ msg_context->u.bulk.instance = instance; -+ msg_context->u.bulk.port = port; -+ msg_context->u.bulk.buffer = NULL; /* not valid until bulk xfer */ -+ msg_context->u.bulk.buffer_used = 0; -+ -+ /* initialise work structure ready to schedule callback */ -+ INIT_WORK(&msg_context->u.bulk.work, buffer_work_cb); -+ -+ /* prep the buffer from host message */ -+ memset(&m, 0xbc, sizeof(m)); /* just to make debug clearer */ -+ -+ m.h.type = MMAL_MSG_TYPE_BUFFER_FROM_HOST; -+ m.h.magic = MMAL_MAGIC; -+ m.h.context = msg_context; -+ m.h.status = 0; -+ -+ /* drvbuf is our private data passed back */ -+ m.u.buffer_from_host.drvbuf.magic = MMAL_MAGIC; -+ m.u.buffer_from_host.drvbuf.component_handle = port->component->handle; -+ m.u.buffer_from_host.drvbuf.port_handle = port->handle; -+ m.u.buffer_from_host.drvbuf.client_context = msg_context; -+ -+ /* buffer header */ -+ m.u.buffer_from_host.buffer_header.cmd = 0; -+ m.u.buffer_from_host.buffer_header.data = buf->buffer; -+ m.u.buffer_from_host.buffer_header.alloc_size = buf->buffer_size; -+ m.u.buffer_from_host.buffer_header.length = 0; /* nothing used yet */ -+ m.u.buffer_from_host.buffer_header.offset = 0; /* no offset */ -+ m.u.buffer_from_host.buffer_header.flags = 0; /* no flags */ -+ m.u.buffer_from_host.buffer_header.pts = MMAL_TIME_UNKNOWN; -+ m.u.buffer_from_host.buffer_header.dts = MMAL_TIME_UNKNOWN; -+ -+ /* clear buffer type sepecific data */ -+ memset(&m.u.buffer_from_host.buffer_header_type_specific, 0, -+ sizeof(m.u.buffer_from_host.buffer_header_type_specific)); -+ -+ /* no payload in message */ -+ m.u.buffer_from_host.payload_in_message = 0; -+ -+ vchi_service_use(instance->handle); -+ -+ ret = vchi_msg_queue(instance->handle, &m, -+ sizeof(struct mmal_msg_header) + -+ sizeof(m.u.buffer_from_host), -+ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); -+ -+ if (ret != 0) { -+ release_msg_context(msg_context); -+ /* todo: is this correct error value? */ -+ } -+ -+ vchi_service_release(instance->handle); -+ -+ mutex_unlock(&instance->bulk_mutex); -+ -+ return ret; -+} -+ -+/* submit a buffer to the mmal sevice -+ * -+ * the buffer_from_host uses size data from the ports next available -+ * mmal_buffer and deals with there being no buffer available by -+ * incrementing the underflow for later -+ */ -+static int port_buffer_from_host(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port) -+{ -+ int ret; -+ struct mmal_buffer *buf; -+ unsigned long flags = 0; -+ -+ if (!port->enabled) -+ return -EINVAL; -+ -+ /* peek buffer from queue */ -+ spin_lock_irqsave(&port->slock, flags); -+ if (list_empty(&port->buffers)) { -+ port->buffer_underflow++; -+ spin_unlock_irqrestore(&port->slock, flags); -+ return -ENOSPC; -+ } -+ -+ buf = list_entry(port->buffers.next, struct mmal_buffer, list); -+ -+ spin_unlock_irqrestore(&port->slock, flags); -+ -+ /* issue buffer to mmal service */ -+ ret = buffer_from_host(instance, port, buf); -+ if (ret) { -+ pr_err("adding buffer header failed\n"); -+ /* todo: how should this be dealt with */ -+ } -+ -+ return ret; -+} -+ -+/* deals with receipt of buffer to host message */ -+static void buffer_to_host_cb(struct vchiq_mmal_instance *instance, -+ struct mmal_msg *msg, u32 msg_len) -+{ -+ struct mmal_msg_context *msg_context; -+ -+ pr_debug("buffer_to_host_cb: instance:%p msg:%p msg_len:%d\n", -+ instance, msg, msg_len); -+ -+ if (msg->u.buffer_from_host.drvbuf.magic == MMAL_MAGIC) { -+ msg_context = msg->u.buffer_from_host.drvbuf.client_context; -+ } else { -+ pr_err("MMAL_MSG_TYPE_BUFFER_TO_HOST with bad magic\n"); -+ return; -+ } -+ -+ if (msg->h.status != MMAL_MSG_STATUS_SUCCESS) { -+ /* message reception had an error */ -+ pr_warn("error %d in reply\n", msg->h.status); -+ -+ msg_context->u.bulk.status = msg->h.status; -+ -+ } else if (msg->u.buffer_from_host.buffer_header.length == 0) { -+ /* empty buffer */ -+ if (msg->u.buffer_from_host.buffer_header.flags & -+ MMAL_BUFFER_HEADER_FLAG_EOS) { -+ msg_context->u.bulk.status = -+ dummy_bulk_receive(instance, msg_context); -+ if (msg_context->u.bulk.status == 0) -+ return; /* successful bulk submission, bulk -+ * completion will trigger callback -+ */ -+ } else { -+ /* do callback with empty buffer - not EOS though */ -+ msg_context->u.bulk.status = 0; -+ msg_context->u.bulk.buffer_used = 0; -+ } -+ } else if (msg->u.buffer_from_host.payload_in_message == 0) { -+ /* data is not in message, queue a bulk receive */ -+ msg_context->u.bulk.status = -+ bulk_receive(instance, msg, msg_context); -+ if (msg_context->u.bulk.status == 0) -+ return; /* successful bulk submission, bulk -+ * completion will trigger callback -+ */ -+ -+ /* failed to submit buffer, this will end badly */ -+ pr_err("error %d on bulk submission\n", -+ msg_context->u.bulk.status); -+ -+ } else if (msg->u.buffer_from_host.payload_in_message <= -+ MMAL_VC_SHORT_DATA) { -+ /* data payload within message */ -+ msg_context->u.bulk.status = inline_receive(instance, msg, -+ msg_context); -+ } else { -+ pr_err("message with invalid short payload\n"); -+ -+ /* signal error */ -+ msg_context->u.bulk.status = -EINVAL; -+ msg_context->u.bulk.buffer_used = -+ msg->u.buffer_from_host.payload_in_message; -+ } -+ -+ /* replace the buffer header */ -+ port_buffer_from_host(instance, msg_context->u.bulk.port); -+ -+ /* schedule the port callback */ -+ schedule_work(&msg_context->u.bulk.work); -+} -+ -+static void bulk_receive_cb(struct vchiq_mmal_instance *instance, -+ struct mmal_msg_context *msg_context) -+{ -+ /* bulk receive operation complete */ -+ mutex_unlock(&msg_context->u.bulk.instance->bulk_mutex); -+ -+ /* replace the buffer header */ -+ port_buffer_from_host(msg_context->u.bulk.instance, -+ msg_context->u.bulk.port); -+ -+ msg_context->u.bulk.status = 0; -+ -+ /* schedule the port callback */ -+ schedule_work(&msg_context->u.bulk.work); -+} -+ -+static void bulk_abort_cb(struct vchiq_mmal_instance *instance, -+ struct mmal_msg_context *msg_context) -+{ -+ pr_err("%s: bulk ABORTED msg_context:%p\n", __func__, msg_context); -+ -+ /* bulk receive operation complete */ -+ mutex_unlock(&msg_context->u.bulk.instance->bulk_mutex); -+ -+ /* replace the buffer header */ -+ port_buffer_from_host(msg_context->u.bulk.instance, -+ msg_context->u.bulk.port); -+ -+ msg_context->u.bulk.status = -EINTR; -+ -+ schedule_work(&msg_context->u.bulk.work); -+} -+ -+/* incoming event service callback */ -+static void service_callback(void *param, -+ const VCHI_CALLBACK_REASON_T reason, -+ void *bulk_ctx) -+{ -+ struct vchiq_mmal_instance *instance = param; -+ int status; -+ u32 msg_len; -+ struct mmal_msg *msg; -+ VCHI_HELD_MSG_T msg_handle; -+ -+ if (!instance) { -+ pr_err("Message callback passed NULL instance\n"); -+ return; -+ } -+ -+ switch (reason) { -+ case VCHI_CALLBACK_MSG_AVAILABLE: -+ status = vchi_msg_hold(instance->handle, (void **)&msg, -+ &msg_len, VCHI_FLAGS_NONE, &msg_handle); -+ if (status) { -+ pr_err("Unable to dequeue a message (%d)\n", status); -+ break; -+ } -+ -+ DBG_DUMP_MSG(msg, msg_len, "<<< reply message"); -+ -+ /* handling is different for buffer messages */ -+ switch (msg->h.type) { -+ -+ case MMAL_MSG_TYPE_BUFFER_FROM_HOST: -+ vchi_held_msg_release(&msg_handle); -+ break; -+ -+ case MMAL_MSG_TYPE_EVENT_TO_HOST: -+ event_to_host_cb(instance, msg, msg_len); -+ vchi_held_msg_release(&msg_handle); -+ -+ break; -+ -+ case MMAL_MSG_TYPE_BUFFER_TO_HOST: -+ buffer_to_host_cb(instance, msg, msg_len); -+ vchi_held_msg_release(&msg_handle); -+ break; -+ -+ default: -+ /* messages dependant on header context to complete */ -+ -+ /* todo: the msg.context really ought to be sanity -+ * checked before we just use it, afaict it comes back -+ * and is used raw from the videocore. Perhaps it -+ * should be verified the address lies in the kernel -+ * address space. -+ */ -+ if (msg->h.context == NULL) { -+ pr_err("received message context was null!\n"); -+ vchi_held_msg_release(&msg_handle); -+ break; -+ } -+ -+ /* fill in context values */ -+ msg->h.context->u.sync.msg_handle = msg_handle; -+ msg->h.context->u.sync.msg = msg; -+ msg->h.context->u.sync.msg_len = msg_len; -+ -+ /* todo: should this check (completion_done() -+ * == 1) for no one waiting? or do we need a -+ * flag to tell us the completion has been -+ * interrupted so we can free the message and -+ * its context. This probably also solves the -+ * message arriving after interruption todo -+ * below -+ */ -+ -+ /* complete message so caller knows it happened */ -+ complete(&msg->h.context->u.sync.cmplt); -+ break; -+ } -+ -+ break; -+ -+ case VCHI_CALLBACK_BULK_RECEIVED: -+ bulk_receive_cb(instance, bulk_ctx); -+ break; -+ -+ case VCHI_CALLBACK_BULK_RECEIVE_ABORTED: -+ bulk_abort_cb(instance, bulk_ctx); -+ break; -+ -+ case VCHI_CALLBACK_SERVICE_CLOSED: -+ /* TODO: consider if this requires action if received when -+ * driver is not explicitly closing the service -+ */ -+ break; -+ -+ default: -+ pr_err("Received unhandled message reason %d\n", reason); -+ break; -+ } -+} -+ -+static int send_synchronous_mmal_msg(struct vchiq_mmal_instance *instance, -+ struct mmal_msg *msg, -+ unsigned int payload_len, -+ struct mmal_msg **msg_out, -+ VCHI_HELD_MSG_T *msg_handle_out) -+{ -+ struct mmal_msg_context msg_context; -+ int ret; -+ -+ /* payload size must not cause message to exceed max size */ -+ if (payload_len > -+ (MMAL_MSG_MAX_SIZE - sizeof(struct mmal_msg_header))) { -+ pr_err("payload length %d exceeds max:%d\n", payload_len, -+ (MMAL_MSG_MAX_SIZE - sizeof(struct mmal_msg_header))); -+ return -EINVAL; -+ } -+ -+ init_completion(&msg_context.u.sync.cmplt); -+ -+ msg->h.magic = MMAL_MAGIC; -+ msg->h.context = &msg_context; -+ msg->h.status = 0; -+ -+ DBG_DUMP_MSG(msg, (sizeof(struct mmal_msg_header) + payload_len), -+ ">>> sync message"); -+ -+ vchi_service_use(instance->handle); -+ -+ ret = vchi_msg_queue(instance->handle, -+ msg, -+ sizeof(struct mmal_msg_header) + payload_len, -+ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); -+ -+ vchi_service_release(instance->handle); -+ -+ if (ret) { -+ pr_err("error %d queuing message\n", ret); -+ return ret; -+ } -+ -+ ret = wait_for_completion_timeout(&msg_context.u.sync.cmplt, 3*HZ); -+ if (ret <= 0) { -+ pr_err("error %d waiting for sync completion\n", ret); -+ if (ret == 0) -+ ret = -ETIME; -+ /* todo: what happens if the message arrives after aborting */ -+ return ret; -+ } -+ -+ *msg_out = msg_context.u.sync.msg; -+ *msg_handle_out = msg_context.u.sync.msg_handle; -+ -+ return 0; -+} -+ -+static void dump_port_info(struct vchiq_mmal_port *port) -+{ -+ pr_debug("port handle:0x%x enabled:%d\n", port->handle, port->enabled); -+ -+ pr_debug("buffer minimum num:%d size:%d align:%d\n", -+ port->minimum_buffer.num, -+ port->minimum_buffer.size, port->minimum_buffer.alignment); -+ -+ pr_debug("buffer recommended num:%d size:%d align:%d\n", -+ port->recommended_buffer.num, -+ port->recommended_buffer.size, -+ port->recommended_buffer.alignment); -+ -+ pr_debug("buffer current values num:%d size:%d align:%d\n", -+ port->current_buffer.num, -+ port->current_buffer.size, port->current_buffer.alignment); -+ -+ pr_debug("elementry stream: type:%d encoding:0x%x varient:0x%x\n", -+ port->format.type, -+ port->format.encoding, port->format.encoding_variant); -+ -+ pr_debug(" bitrate:%d flags:0x%x\n", -+ port->format.bitrate, port->format.flags); -+ -+ if (port->format.type == MMAL_ES_TYPE_VIDEO) { -+ pr_debug -+ ("es video format: width:%d height:%d colourspace:0x%x\n", -+ port->es.video.width, port->es.video.height, -+ port->es.video.color_space); -+ -+ pr_debug(" : crop xywh %d,%d,%d,%d\n", -+ port->es.video.crop.x, -+ port->es.video.crop.y, -+ port->es.video.crop.width, port->es.video.crop.height); -+ pr_debug(" : framerate %d/%d aspect %d/%d\n", -+ port->es.video.frame_rate.num, -+ port->es.video.frame_rate.den, -+ port->es.video.par.num, port->es.video.par.den); -+ } -+} -+ -+static void port_to_mmal_msg(struct vchiq_mmal_port *port, struct mmal_port *p) -+{ -+ -+ /* todo do readonly fields need setting at all? */ -+ p->type = port->type; -+ p->index = port->index; -+ p->index_all = 0; -+ p->is_enabled = port->enabled; -+ p->buffer_num_min = port->minimum_buffer.num; -+ p->buffer_size_min = port->minimum_buffer.size; -+ p->buffer_alignment_min = port->minimum_buffer.alignment; -+ p->buffer_num_recommended = port->recommended_buffer.num; -+ p->buffer_size_recommended = port->recommended_buffer.size; -+ -+ /* only three writable fields in a port */ -+ p->buffer_num = port->current_buffer.num; -+ p->buffer_size = port->current_buffer.size; -+ p->userdata = port; -+} -+ -+static int port_info_set(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ pr_debug("setting port info port %p\n", port); -+ if (!port) -+ return -1; -+ dump_port_info(port); -+ -+ m.h.type = MMAL_MSG_TYPE_PORT_INFO_SET; -+ -+ m.u.port_info_set.component_handle = port->component->handle; -+ m.u.port_info_set.port_type = port->type; -+ m.u.port_info_set.port_index = port->index; -+ -+ port_to_mmal_msg(port, &m.u.port_info_set.port); -+ -+ /* elementry stream format setup */ -+ m.u.port_info_set.format.type = port->format.type; -+ m.u.port_info_set.format.encoding = port->format.encoding; -+ m.u.port_info_set.format.encoding_variant = -+ port->format.encoding_variant; -+ m.u.port_info_set.format.bitrate = port->format.bitrate; -+ m.u.port_info_set.format.flags = port->format.flags; -+ -+ memcpy(&m.u.port_info_set.es, &port->es, -+ sizeof(union mmal_es_specific_format)); -+ -+ m.u.port_info_set.format.extradata_size = port->format.extradata_size; -+ memcpy(&m.u.port_info_set.extradata, port->format.extradata, -+ port->format.extradata_size); -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.port_info_set), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_INFO_SET) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ /* return operation status */ -+ ret = -rmsg->u.port_info_get_reply.status; -+ -+ pr_debug("%s:result:%d component:0x%x port:%d\n", __func__, ret, -+ port->component->handle, port->handle); -+ -+release_msg: -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+ -+} -+ -+/* use port info get message to retrive port information */ -+static int port_info_get(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ /* port info time */ -+ m.h.type = MMAL_MSG_TYPE_PORT_INFO_GET; -+ m.u.port_info_get.component_handle = port->component->handle; -+ m.u.port_info_get.port_type = port->type; -+ m.u.port_info_get.index = port->index; -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.port_info_get), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_INFO_GET) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ /* return operation status */ -+ ret = -rmsg->u.port_info_get_reply.status; -+ if (ret != MMAL_MSG_STATUS_SUCCESS) -+ goto release_msg; -+ -+ if (rmsg->u.port_info_get_reply.port.is_enabled == 0) -+ port->enabled = false; -+ else -+ port->enabled = true; -+ -+ /* copy the values out of the message */ -+ port->handle = rmsg->u.port_info_get_reply.port_handle; -+ -+ /* port type and index cached to use on port info set becuase -+ * it does not use a port handle -+ */ -+ port->type = rmsg->u.port_info_get_reply.port_type; -+ port->index = rmsg->u.port_info_get_reply.port_index; -+ -+ port->minimum_buffer.num = -+ rmsg->u.port_info_get_reply.port.buffer_num_min; -+ port->minimum_buffer.size = -+ rmsg->u.port_info_get_reply.port.buffer_size_min; -+ port->minimum_buffer.alignment = -+ rmsg->u.port_info_get_reply.port.buffer_alignment_min; -+ -+ port->recommended_buffer.alignment = -+ rmsg->u.port_info_get_reply.port.buffer_alignment_min; -+ port->recommended_buffer.num = -+ rmsg->u.port_info_get_reply.port.buffer_num_recommended; -+ -+ port->current_buffer.num = rmsg->u.port_info_get_reply.port.buffer_num; -+ port->current_buffer.size = -+ rmsg->u.port_info_get_reply.port.buffer_size; -+ -+ /* stream format */ -+ port->format.type = rmsg->u.port_info_get_reply.format.type; -+ port->format.encoding = rmsg->u.port_info_get_reply.format.encoding; -+ port->format.encoding_variant = -+ rmsg->u.port_info_get_reply.format.encoding_variant; -+ port->format.bitrate = rmsg->u.port_info_get_reply.format.bitrate; -+ port->format.flags = rmsg->u.port_info_get_reply.format.flags; -+ -+ /* elementry stream format */ -+ memcpy(&port->es, -+ &rmsg->u.port_info_get_reply.es, -+ sizeof(union mmal_es_specific_format)); -+ port->format.es = &port->es; -+ -+ port->format.extradata_size = -+ rmsg->u.port_info_get_reply.format.extradata_size; -+ memcpy(port->format.extradata, -+ rmsg->u.port_info_get_reply.extradata, -+ port->format.extradata_size); -+ -+ pr_debug("received port info\n"); -+ dump_port_info(port); -+ -+release_msg: -+ -+ pr_debug("%s:result:%d component:0x%x port:%d\n", -+ __func__, ret, port->component->handle, port->handle); -+ -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+/* create comonent on vc */ -+static int create_component(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component, -+ const char *name) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ /* build component create message */ -+ m.h.type = MMAL_MSG_TYPE_COMPONENT_CREATE; -+ m.u.component_create.client_component = component; -+ strncpy(m.u.component_create.name, name, -+ sizeof(m.u.component_create.name)); -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.component_create), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != m.h.type) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ ret = -rmsg->u.component_create_reply.status; -+ if (ret != MMAL_MSG_STATUS_SUCCESS) -+ goto release_msg; -+ -+ /* a valid component response received */ -+ component->handle = rmsg->u.component_create_reply.component_handle; -+ component->inputs = rmsg->u.component_create_reply.input_num; -+ component->outputs = rmsg->u.component_create_reply.output_num; -+ component->clocks = rmsg->u.component_create_reply.clock_num; -+ -+ pr_debug("Component handle:0x%x in:%d out:%d clock:%d\n", -+ component->handle, -+ component->inputs, component->outputs, component->clocks); -+ -+release_msg: -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+/* destroys a component on vc */ -+static int destroy_component(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ m.h.type = MMAL_MSG_TYPE_COMPONENT_DESTROY; -+ m.u.component_destroy.component_handle = component->handle; -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.component_destroy), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != m.h.type) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ ret = -rmsg->u.component_destroy_reply.status; -+ -+release_msg: -+ -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+/* enable a component on vc */ -+static int enable_component(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ m.h.type = MMAL_MSG_TYPE_COMPONENT_ENABLE; -+ m.u.component_enable.component_handle = component->handle; -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.component_enable), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != m.h.type) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ ret = -rmsg->u.component_enable_reply.status; -+ -+release_msg: -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+/* disable a component on vc */ -+static int disable_component(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ m.h.type = MMAL_MSG_TYPE_COMPONENT_DISABLE; -+ m.u.component_disable.component_handle = component->handle; -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.component_disable), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != m.h.type) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ ret = -rmsg->u.component_disable_reply.status; -+ -+release_msg: -+ -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+/* get version of mmal implementation */ -+static int get_version(struct vchiq_mmal_instance *instance, -+ u32 *major_out, u32 *minor_out) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ m.h.type = MMAL_MSG_TYPE_GET_VERSION; -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.version), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != m.h.type) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ *major_out = rmsg->u.version.major; -+ *minor_out = rmsg->u.version.minor; -+ -+release_msg: -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+/* do a port action with a port as a parameter */ -+static int port_action_port(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ enum mmal_msg_port_action_type action_type) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ m.h.type = MMAL_MSG_TYPE_PORT_ACTION; -+ m.u.port_action_port.component_handle = port->component->handle; -+ m.u.port_action_port.port_handle = port->handle; -+ m.u.port_action_port.action = action_type; -+ -+ port_to_mmal_msg(port, &m.u.port_action_port.port); -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.port_action_port), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_ACTION) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ ret = -rmsg->u.port_action_reply.status; -+ -+ pr_debug("%s:result:%d component:0x%x port:%d action:%s(%d)\n", -+ __func__, -+ ret, port->component->handle, port->handle, -+ port_action_type_names[action_type], action_type); -+ -+release_msg: -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+/* do a port action with handles as parameters */ -+static int port_action_handle(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ enum mmal_msg_port_action_type action_type, -+ u32 connect_component_handle, -+ u32 connect_port_handle) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ m.h.type = MMAL_MSG_TYPE_PORT_ACTION; -+ -+ m.u.port_action_handle.component_handle = port->component->handle; -+ m.u.port_action_handle.port_handle = port->handle; -+ m.u.port_action_handle.action = action_type; -+ -+ m.u.port_action_handle.connect_component_handle = -+ connect_component_handle; -+ m.u.port_action_handle.connect_port_handle = connect_port_handle; -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(m.u.port_action_handle), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_ACTION) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ ret = -rmsg->u.port_action_reply.status; -+ -+ pr_debug("%s:result:%d component:0x%x port:%d action:%s(%d)" \ -+ " connect component:0x%x connect port:%d\n", -+ __func__, -+ ret, port->component->handle, port->handle, -+ port_action_type_names[action_type], -+ action_type, connect_component_handle, connect_port_handle); -+ -+release_msg: -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+static int port_parameter_set(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ u32 parameter_id, void *value, u32 value_size) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ m.h.type = MMAL_MSG_TYPE_PORT_PARAMETER_SET; -+ -+ m.u.port_parameter_set.component_handle = port->component->handle; -+ m.u.port_parameter_set.port_handle = port->handle; -+ m.u.port_parameter_set.id = parameter_id; -+ m.u.port_parameter_set.size = (2 * sizeof(u32)) + value_size; -+ memcpy(&m.u.port_parameter_set.value, value, value_size); -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ (4 * sizeof(u32)) + value_size, -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_PARAMETER_SET) { -+ /* got an unexpected message type in reply */ -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ ret = -rmsg->u.port_parameter_set_reply.status; -+ -+ pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", -+ __func__, -+ ret, port->component->handle, port->handle, parameter_id); -+ -+release_msg: -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+static int port_parameter_get(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ u32 parameter_id, void *value, u32 *value_size) -+{ -+ int ret; -+ struct mmal_msg m; -+ struct mmal_msg *rmsg; -+ VCHI_HELD_MSG_T rmsg_handle; -+ -+ m.h.type = MMAL_MSG_TYPE_PORT_PARAMETER_GET; -+ -+ m.u.port_parameter_get.component_handle = port->component->handle; -+ m.u.port_parameter_get.port_handle = port->handle; -+ m.u.port_parameter_get.id = parameter_id; -+ m.u.port_parameter_get.size = (2 * sizeof(u32)) + *value_size; -+ -+ ret = send_synchronous_mmal_msg(instance, &m, -+ sizeof(struct -+ mmal_msg_port_parameter_get), -+ &rmsg, &rmsg_handle); -+ if (ret) -+ return ret; -+ -+ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_PARAMETER_GET) { -+ /* got an unexpected message type in reply */ -+ pr_err("Incorrect reply type %d\n", rmsg->h.type); -+ ret = -EINVAL; -+ goto release_msg; -+ } -+ -+ ret = -rmsg->u.port_parameter_get_reply.status; -+ if (ret) { -+ /* Copy only as much as we have space for -+ * but report true size of parameter -+ */ -+ memcpy(value, &rmsg->u.port_parameter_get_reply.value, -+ *value_size); -+ *value_size = rmsg->u.port_parameter_get_reply.size; -+ } else -+ memcpy(value, &rmsg->u.port_parameter_get_reply.value, -+ rmsg->u.port_parameter_get_reply.size); -+ -+ pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", __func__, -+ ret, port->component->handle, port->handle, parameter_id); -+ -+release_msg: -+ vchi_held_msg_release(&rmsg_handle); -+ -+ return ret; -+} -+ -+/* disables a port and drains buffers from it */ -+static int port_disable(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port) -+{ -+ int ret; -+ struct list_head *q, *buf_head; -+ unsigned long flags = 0; -+ -+ if (!port->enabled) -+ return 0; -+ -+ port->enabled = false; -+ -+ ret = port_action_port(instance, port, -+ MMAL_MSG_PORT_ACTION_TYPE_DISABLE); -+ if (ret == 0) { -+ -+ /* drain all queued buffers on port */ -+ spin_lock_irqsave(&port->slock, flags); -+ -+ list_for_each_safe(buf_head, q, &port->buffers) { -+ struct mmal_buffer *mmalbuf; -+ mmalbuf = list_entry(buf_head, struct mmal_buffer, -+ list); -+ list_del(buf_head); -+ if (port->buffer_cb) -+ port->buffer_cb(instance, -+ port, 0, mmalbuf, 0, 0, -+ MMAL_TIME_UNKNOWN, -+ MMAL_TIME_UNKNOWN); -+ } -+ -+ spin_unlock_irqrestore(&port->slock, flags); -+ -+ ret = port_info_get(instance, port); -+ } -+ -+ return ret; -+} -+ -+/* enable a port */ -+static int port_enable(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port) -+{ -+ unsigned int hdr_count; -+ struct list_head *buf_head; -+ int ret; -+ -+ if (port->enabled) -+ return 0; -+ -+ /* ensure there are enough buffers queued to cover the buffer headers */ -+ if (port->buffer_cb != NULL) { -+ hdr_count = 0; -+ list_for_each(buf_head, &port->buffers) { -+ hdr_count++; -+ } -+ if (hdr_count < port->current_buffer.num) -+ return -ENOSPC; -+ } -+ -+ ret = port_action_port(instance, port, -+ MMAL_MSG_PORT_ACTION_TYPE_ENABLE); -+ if (ret) -+ goto done; -+ -+ port->enabled = true; -+ -+ if (port->buffer_cb) { -+ /* send buffer headers to videocore */ -+ hdr_count = 1; -+ list_for_each(buf_head, &port->buffers) { -+ struct mmal_buffer *mmalbuf; -+ mmalbuf = list_entry(buf_head, struct mmal_buffer, -+ list); -+ ret = buffer_from_host(instance, port, mmalbuf); -+ if (ret) -+ goto done; -+ -+ hdr_count++; -+ if (hdr_count > port->current_buffer.num) -+ break; -+ } -+ } -+ -+ ret = port_info_get(instance, port); -+ -+done: -+ return ret; -+} -+ -+/* ------------------------------------------------------------------ -+ * Exported API -+ *------------------------------------------------------------------*/ -+ -+int vchiq_mmal_port_set_format(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ ret = port_info_set(instance, port); -+ if (ret) -+ goto release_unlock; -+ -+ /* read what has actually been set */ -+ ret = port_info_get(instance, port); -+ -+release_unlock: -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+ -+} -+ -+int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ u32 parameter, void *value, u32 value_size) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ ret = port_parameter_set(instance, port, parameter, value, value_size); -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+ -+int vchiq_mmal_port_parameter_get(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ u32 parameter, void *value, u32 *value_size) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ ret = port_parameter_get(instance, port, parameter, value, value_size); -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+ -+/* enable a port -+ * -+ * enables a port and queues buffers for satisfying callbacks if we -+ * provide a callback handler -+ */ -+int vchiq_mmal_port_enable(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ vchiq_mmal_buffer_cb buffer_cb) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ /* already enabled - noop */ -+ if (port->enabled) { -+ ret = 0; -+ goto unlock; -+ } -+ -+ port->buffer_cb = buffer_cb; -+ -+ ret = port_enable(instance, port); -+ -+unlock: -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+ -+int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ if (!port->enabled) { -+ mutex_unlock(&instance->vchiq_mutex); -+ return 0; -+ } -+ -+ ret = port_disable(instance, port); -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+ -+/* ports will be connected in a tunneled manner so data buffers -+ * are not handled by client. -+ */ -+int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *src, -+ struct vchiq_mmal_port *dst) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ /* disconnect ports if connected */ -+ if (src->connected != NULL) { -+ ret = port_disable(instance, src); -+ if (ret) { -+ pr_err("failed disabling src port(%d)\n", ret); -+ goto release_unlock; -+ } -+ -+ /* do not need to disable the destination port as they -+ * are connected and it is done automatically -+ */ -+ -+ ret = port_action_handle(instance, src, -+ MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, -+ src->connected->component->handle, -+ src->connected->handle); -+ if (ret < 0) { -+ pr_err("failed disconnecting src port\n"); -+ goto release_unlock; -+ } -+ src->connected->enabled = false; -+ src->connected = NULL; -+ } -+ -+ if (dst == NULL) { -+ /* do not make new connection */ -+ ret = 0; -+ pr_debug("not making new connection\n"); -+ goto release_unlock; -+ } -+ -+ /* copy src port format to dst */ -+ dst->format.encoding = src->format.encoding; -+ dst->es.video.width = src->es.video.width; -+ dst->es.video.height = src->es.video.height; -+ dst->es.video.crop.x = src->es.video.crop.x; -+ dst->es.video.crop.y = src->es.video.crop.y; -+ dst->es.video.crop.width = src->es.video.crop.width; -+ dst->es.video.crop.height = src->es.video.crop.height; -+ dst->es.video.frame_rate.num = src->es.video.frame_rate.num; -+ dst->es.video.frame_rate.den = src->es.video.frame_rate.den; -+ -+ /* set new format */ -+ ret = port_info_set(instance, dst); -+ if (ret) { -+ pr_debug("setting port info failed\n"); -+ goto release_unlock; -+ } -+ -+ /* read what has actually been set */ -+ ret = port_info_get(instance, dst); -+ if (ret) { -+ pr_debug("read back port info failed\n"); -+ goto release_unlock; -+ } -+ -+ /* connect two ports together */ -+ ret = port_action_handle(instance, src, -+ MMAL_MSG_PORT_ACTION_TYPE_CONNECT, -+ dst->component->handle, dst->handle); -+ if (ret < 0) { -+ pr_debug("connecting port %d:%d to %d:%d failed\n", -+ src->component->handle, src->handle, -+ dst->component->handle, dst->handle); -+ goto release_unlock; -+ } -+ src->connected = dst; -+ -+release_unlock: -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+ -+int vchiq_mmal_submit_buffer(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ struct mmal_buffer *buffer) -+{ -+ unsigned long flags = 0; -+ -+ spin_lock_irqsave(&port->slock, flags); -+ list_add_tail(&buffer->list, &port->buffers); -+ spin_unlock_irqrestore(&port->slock, flags); -+ -+ /* the port previously underflowed because it was missing a -+ * mmal_buffer which has just been added, submit that buffer -+ * to the mmal service. -+ */ -+ if (port->buffer_underflow) { -+ port_buffer_from_host(instance, port); -+ port->buffer_underflow--; -+ } -+ -+ return 0; -+} -+ -+/* Initialise a mmal component and its ports -+ * -+ */ -+int vchiq_mmal_component_init(struct vchiq_mmal_instance *instance, -+ const char *name, -+ struct vchiq_mmal_component **component_out) -+{ -+ int ret; -+ int idx; /* port index */ -+ struct vchiq_mmal_component *component; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ if (instance->component_idx == VCHIQ_MMAL_MAX_COMPONENTS) { -+ ret = -EINVAL; /* todo is this correct error? */ -+ goto unlock; -+ } -+ -+ component = &instance->component[instance->component_idx]; -+ -+ ret = create_component(instance, component, name); -+ if (ret < 0) -+ goto unlock; -+ -+ /* ports info needs gathering */ -+ component->control.type = MMAL_PORT_TYPE_CONTROL; -+ component->control.index = 0; -+ component->control.component = component; -+ spin_lock_init(&component->control.slock); -+ INIT_LIST_HEAD(&component->control.buffers); -+ ret = port_info_get(instance, &component->control); -+ if (ret < 0) -+ goto release_component; -+ -+ for (idx = 0; idx < component->inputs; idx++) { -+ component->input[idx].type = MMAL_PORT_TYPE_INPUT; -+ component->input[idx].index = idx; -+ component->input[idx].component = component; -+ spin_lock_init(&component->input[idx].slock); -+ INIT_LIST_HEAD(&component->input[idx].buffers); -+ ret = port_info_get(instance, &component->input[idx]); -+ if (ret < 0) -+ goto release_component; -+ } -+ -+ for (idx = 0; idx < component->outputs; idx++) { -+ component->output[idx].type = MMAL_PORT_TYPE_OUTPUT; -+ component->output[idx].index = idx; -+ component->output[idx].component = component; -+ spin_lock_init(&component->output[idx].slock); -+ INIT_LIST_HEAD(&component->output[idx].buffers); -+ ret = port_info_get(instance, &component->output[idx]); -+ if (ret < 0) -+ goto release_component; -+ } -+ -+ for (idx = 0; idx < component->clocks; idx++) { -+ component->clock[idx].type = MMAL_PORT_TYPE_CLOCK; -+ component->clock[idx].index = idx; -+ component->clock[idx].component = component; -+ spin_lock_init(&component->clock[idx].slock); -+ INIT_LIST_HEAD(&component->clock[idx].buffers); -+ ret = port_info_get(instance, &component->clock[idx]); -+ if (ret < 0) -+ goto release_component; -+ } -+ -+ instance->component_idx++; -+ -+ *component_out = component; -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return 0; -+ -+release_component: -+ destroy_component(instance, component); -+unlock: -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+ -+/* -+ * cause a mmal component to be destroyed -+ */ -+int vchiq_mmal_component_finalise(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ if (component->enabled) -+ ret = disable_component(instance, component); -+ -+ ret = destroy_component(instance, component); -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+ -+/* -+ * cause a mmal component to be enabled -+ */ -+int vchiq_mmal_component_enable(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ if (component->enabled) { -+ mutex_unlock(&instance->vchiq_mutex); -+ return 0; -+ } -+ -+ ret = enable_component(instance, component); -+ if (ret == 0) -+ component->enabled = true; -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+ -+/* -+ * cause a mmal component to be enabled -+ */ -+int vchiq_mmal_component_disable(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ if (!component->enabled) { -+ mutex_unlock(&instance->vchiq_mutex); -+ return 0; -+ } -+ -+ ret = disable_component(instance, component); -+ if (ret == 0) -+ component->enabled = false; -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+ -+int vchiq_mmal_version(struct vchiq_mmal_instance *instance, -+ u32 *major_out, u32 *minor_out) -+{ -+ int ret; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ ret = get_version(instance, major_out, minor_out); -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ return ret; -+} -+ -+int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance) -+{ -+ int status = 0; -+ -+ if (instance == NULL) -+ return -EINVAL; -+ -+ if (mutex_lock_interruptible(&instance->vchiq_mutex)) -+ return -EINTR; -+ -+ vchi_service_use(instance->handle); -+ -+ status = vchi_service_close(instance->handle); -+ if (status != 0) -+ pr_err("mmal-vchiq: VCHIQ close failed"); -+ -+ mutex_unlock(&instance->vchiq_mutex); -+ -+ vfree(instance->bulk_scratch); -+ -+ kfree(instance); -+ -+ return status; -+} -+ -+int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance) -+{ -+ int status; -+ struct vchiq_mmal_instance *instance; -+ static VCHI_CONNECTION_T *vchi_connection; -+ static VCHI_INSTANCE_T vchi_instance; -+ SERVICE_CREATION_T params = { -+ VCHI_VERSION_EX(VC_MMAL_VER, VC_MMAL_MIN_VER), -+ VC_MMAL_SERVER_NAME, -+ vchi_connection, -+ 0, /* rx fifo size (unused) */ -+ 0, /* tx fifo size (unused) */ -+ service_callback, -+ NULL, /* service callback parameter */ -+ 1, /* unaligned bulk receives */ -+ 1, /* unaligned bulk transmits */ -+ 0 /* want crc check on bulk transfers */ -+ }; -+ -+ /* compile time checks to ensure structure size as they are -+ * directly (de)serialised from memory. -+ */ -+ -+ /* ensure the header structure has packed to the correct size */ -+ BUILD_BUG_ON(sizeof(struct mmal_msg_header) != 24); -+ -+ /* ensure message structure does not exceed maximum length */ -+ BUILD_BUG_ON(sizeof(struct mmal_msg) > MMAL_MSG_MAX_SIZE); -+ -+ /* mmal port struct is correct size */ -+ BUILD_BUG_ON(sizeof(struct mmal_port) != 64); -+ -+ /* create a vchi instance */ -+ status = vchi_initialise(&vchi_instance); -+ if (status) { -+ pr_err("Failed to initialise VCHI instance (status=%d)\n", -+ status); -+ return -EIO; -+ } -+ -+ status = vchi_connect(NULL, 0, vchi_instance); -+ if (status) { -+ pr_err("Failed to connect VCHI instance (status=%d)\n", status); -+ return -EIO; -+ } -+ -+ instance = kmalloc(sizeof(*instance), GFP_KERNEL); -+ memset(instance, 0, sizeof(*instance)); -+ -+ mutex_init(&instance->vchiq_mutex); -+ mutex_init(&instance->bulk_mutex); -+ -+ instance->bulk_scratch = vmalloc(PAGE_SIZE); -+ -+ params.callback_param = instance; -+ -+ status = vchi_service_open(vchi_instance, ¶ms, &instance->handle); -+ if (status) { -+ pr_err("Failed to open VCHI service connection (status=%d)\n", -+ status); -+ goto err_close_services; -+ } -+ -+ vchi_service_release(instance->handle); -+ -+ *out_instance = instance; -+ -+ return 0; -+ -+err_close_services: -+ -+ vchi_service_close(instance->handle); -+ vfree(instance->bulk_scratch); -+ kfree(instance); -+ return -ENODEV; -+} ---- /dev/null -+++ b/drivers/media/platform/bcm2835/mmal-vchiq.h -@@ -0,0 +1,178 @@ -+/* -+ * Broadcom BM2835 V4L2 driver -+ * -+ * Copyright © 2013 Raspberry Pi (Trading) Ltd. -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive -+ * for more details. -+ * -+ * Authors: Vincent Sanders -+ * Dave Stevenson -+ * Simon Mellor -+ * Luke Diamand -+ * -+ * MMAL interface to VCHIQ message passing -+ */ -+ -+#ifndef MMAL_VCHIQ_H -+#define MMAL_VCHIQ_H -+ -+#include "mmal-msg-format.h" -+ -+#define MAX_PORT_COUNT 4 -+ -+/* Maximum size of the format extradata. */ -+#define MMAL_FORMAT_EXTRADATA_MAX_SIZE 128 -+ -+struct vchiq_mmal_instance; -+ -+enum vchiq_mmal_es_type { -+ MMAL_ES_TYPE_UNKNOWN, /**< Unknown elementary stream type */ -+ MMAL_ES_TYPE_CONTROL, /**< Elementary stream of control commands */ -+ MMAL_ES_TYPE_AUDIO, /**< Audio elementary stream */ -+ MMAL_ES_TYPE_VIDEO, /**< Video elementary stream */ -+ MMAL_ES_TYPE_SUBPICTURE /**< Sub-picture elementary stream */ -+}; -+ -+/* rectangle, used lots so it gets its own struct */ -+struct vchiq_mmal_rect { -+ s32 x; -+ s32 y; -+ s32 width; -+ s32 height; -+}; -+ -+struct vchiq_mmal_port_buffer { -+ unsigned int num; /* number of buffers */ -+ u32 size; /* size of buffers */ -+ u32 alignment; /* alignment of buffers */ -+}; -+ -+struct vchiq_mmal_port; -+ -+typedef void (*vchiq_mmal_buffer_cb)( -+ struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ int status, struct mmal_buffer *buffer, -+ unsigned long length, u32 mmal_flags, s64 dts, s64 pts); -+ -+struct vchiq_mmal_port { -+ bool enabled; -+ u32 handle; -+ u32 type; /* port type, cached to use on port info set */ -+ u32 index; /* port index, cached to use on port info set */ -+ -+ /* component port belongs to, allows simple deref */ -+ struct vchiq_mmal_component *component; -+ -+ struct vchiq_mmal_port *connected; /* port conencted to */ -+ -+ /* buffer info */ -+ struct vchiq_mmal_port_buffer minimum_buffer; -+ struct vchiq_mmal_port_buffer recommended_buffer; -+ struct vchiq_mmal_port_buffer current_buffer; -+ -+ /* stream format */ -+ struct mmal_es_format format; -+ /* elementry stream format */ -+ union mmal_es_specific_format es; -+ -+ /* data buffers to fill */ -+ struct list_head buffers; -+ /* lock to serialise adding and removing buffers from list */ -+ spinlock_t slock; -+ /* count of how many buffer header refils have failed because -+ * there was no buffer to satisfy them -+ */ -+ int buffer_underflow; -+ /* callback on buffer completion */ -+ vchiq_mmal_buffer_cb buffer_cb; -+ /* callback context */ -+ void *cb_ctx; -+}; -+ -+struct vchiq_mmal_component { -+ bool enabled; -+ u32 handle; /* VideoCore handle for component */ -+ u32 inputs; /* Number of input ports */ -+ u32 outputs; /* Number of output ports */ -+ u32 clocks; /* Number of clock ports */ -+ struct vchiq_mmal_port control; /* control port */ -+ struct vchiq_mmal_port input[MAX_PORT_COUNT]; /* input ports */ -+ struct vchiq_mmal_port output[MAX_PORT_COUNT]; /* output ports */ -+ struct vchiq_mmal_port clock[MAX_PORT_COUNT]; /* clock ports */ -+}; -+ -+ -+int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance); -+int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance); -+ -+/* Initialise a mmal component and its ports -+* -+*/ -+int vchiq_mmal_component_init( -+ struct vchiq_mmal_instance *instance, -+ const char *name, -+ struct vchiq_mmal_component **component_out); -+ -+int vchiq_mmal_component_finalise( -+ struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component); -+ -+int vchiq_mmal_component_enable( -+ struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component); -+ -+int vchiq_mmal_component_disable( -+ struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_component *component); -+ -+ -+ -+/* enable a mmal port -+ * -+ * enables a port and if a buffer callback provided enque buffer -+ * headers as apropriate for the port. -+ */ -+int vchiq_mmal_port_enable( -+ struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ vchiq_mmal_buffer_cb buffer_cb); -+ -+/* disable a port -+ * -+ * disable a port will dequeue any pending buffers -+ */ -+int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port); -+ -+ -+int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ u32 parameter, -+ void *value, -+ u32 value_size); -+ -+int vchiq_mmal_port_parameter_get(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ u32 parameter, -+ void *value, -+ u32 *value_size); -+ -+int vchiq_mmal_port_set_format(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port); -+ -+int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *src, -+ struct vchiq_mmal_port *dst); -+ -+int vchiq_mmal_version(struct vchiq_mmal_instance *instance, -+ u32 *major_out, -+ u32 *minor_out); -+ -+int vchiq_mmal_submit_buffer(struct vchiq_mmal_instance *instance, -+ struct vchiq_mmal_port *port, -+ struct mmal_buffer *buf); -+ -+#endif /* MMAL_VCHIQ_H */ diff --git a/target/linux/brcm2708/patches-4.9/0052-scripts-Add-mkknlimg-and-knlinfo-scripts-from-tools-.patch b/target/linux/brcm2708/patches-4.9/0052-scripts-Add-mkknlimg-and-knlinfo-scripts-from-tools-.patch deleted file mode 100644 index 7ae4edd5c29d..000000000000 --- a/target/linux/brcm2708/patches-4.9/0052-scripts-Add-mkknlimg-and-knlinfo-scripts-from-tools-.patch +++ /dev/null @@ -1,515 +0,0 @@ -From c1275c733d61290f7477eb7bbaea96d04206eff3 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 11 May 2015 09:00:42 +0100 -Subject: [PATCH] scripts: Add mkknlimg and knlinfo scripts from tools repo - -The Raspberry Pi firmware looks for a trailer on the kernel image to -determine whether it was compiled with Device Tree support enabled. -If the firmware finds a kernel without this trailer, or which has a -trailer indicating that it isn't DT-capable, it disables DT support -and reverts to using ATAGs. - -The mkknlimg utility adds that trailer, having first analysed the -image to look for signs of DT support and the kernel version string. - -knlinfo displays the contents of the trailer in the given kernel image. - -scripts/mkknlimg: Add support for ARCH_BCM2835 - -Add a new trailer field indicating whether this is an ARCH_BCM2835 -build, as opposed to MACH_BCM2708/9. If the loader finds this flag -is set it changes the default base dtb file name from bcm270x... -to bcm283y... - -Also update knlinfo to show the status of the field. - -scripts/mkknlimg: Improve ARCH_BCM2835 detection - -The board support code contains sufficient strings to be able to -distinguish 2708 vs. 2835 builds, so remove the check for -bcm2835-pm-wdt which could exist in either. - -Also, since the canned configuration is no longer built in (it's -a module), remove the config string checking. - -See: https://github.com/raspberrypi/linux/issues/1157 - -scripts: Multi-platform support for mkknlimg and knlinfo - -The firmware uses tags in the kernel trailer to choose which dtb file -to load. Current firmware loads bcm2835-*.dtb if the '283x' tag is true, -otherwise it loads bcm270*.dtb. This scheme breaks if an image supports -multiple platforms. - -This patch adds '270X' and '283X' tags to indicate support for RPi and -upstream platforms, respectively. '283x' (note lower case 'x') is left -for old firmware, and is only set if the image only supports upstream -builds. - -scripts/mkknlimg: Append a trailer for all input - -Now that the firmware assumes an unsigned kernel is DT-capable, it is -helpful to be able to mark a kernel as being non-DT-capable. - -Signed-off-by: Phil Elwell - -scripts/knlinfo: Decode DDTK atom - -Show the DDTK atom as being a boolean. - -Signed-off-by: Phil Elwell - -mkknlimg: Retain downstream-kernel detection - -With the death of ARCH_BCM2708 and ARCH_BCM2709, a new way is needed to -determine if this is a "downstream" build that wants the firmware to -load a bcm27xx .dtb. The vc_cma driver is used downstream but not -upstream, making vc_cma_init a suitable predicate symbol. ---- - scripts/knlinfo | 171 +++++++++++++++++++++++++++++++++++ - scripts/mkknlimg | 264 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 435 insertions(+) - create mode 100755 scripts/knlinfo - create mode 100755 scripts/mkknlimg - ---- /dev/null -+++ b/scripts/knlinfo -@@ -0,0 +1,171 @@ -+#!/usr/bin/env perl -+# ---------------------------------------------------------------------- -+# knlinfo by Phil Elwell for Raspberry Pi -+# -+# (c) 2014,2015 Raspberry Pi (Trading) Limited -+# -+# Licensed under the terms of the GNU General Public License. -+# ---------------------------------------------------------------------- -+ -+use strict; -+use integer; -+ -+use Fcntl ":seek"; -+ -+my $trailer_magic = 'RPTL'; -+ -+my %atom_formats = -+( -+ 'DDTK' => \&format_bool, -+ 'DTOK' => \&format_bool, -+ 'KVer' => \&format_string, -+ '270X' => \&format_bool, -+ '283X' => \&format_bool, -+ '283x' => \&format_bool, -+); -+ -+if (@ARGV != 1) -+{ -+ print ("Usage: knlinfo \n"); -+ exit(1); -+} -+ -+my $kernel_file = $ARGV[0]; -+ -+ -+my ($atoms, $pos) = read_trailer($kernel_file); -+ -+exit(1) if (!$atoms); -+ -+printf("Kernel trailer found at %d/0x%x:\n", $pos, $pos); -+ -+foreach my $atom (@$atoms) -+{ -+ printf(" %s: %s\n", $atom->[0], format_atom($atom)); -+} -+ -+exit(0); -+ -+sub read_trailer -+{ -+ my ($kernel_file) = @_; -+ my $fh; -+ -+ if (!open($fh, '<', $kernel_file)) -+ { -+ print ("* Failed to open '$kernel_file'\n"); -+ return undef; -+ } -+ -+ if (!seek($fh, -12, SEEK_END)) -+ { -+ print ("* seek error in '$kernel_file'\n"); -+ return undef; -+ } -+ -+ my $last_bytes; -+ sysread($fh, $last_bytes, 12); -+ -+ my ($trailer_len, $data_len, $magic) = unpack('VVa4', $last_bytes); -+ -+ if (($magic ne $trailer_magic) || ($data_len != 4)) -+ { -+ print ("* no trailer\n"); -+ return undef; -+ } -+ if (!seek($fh, -12, SEEK_END)) -+ { -+ print ("* seek error in '$kernel_file'\n"); -+ return undef; -+ } -+ -+ $trailer_len -= 12; -+ -+ while ($trailer_len > 0) -+ { -+ if ($trailer_len < 8) -+ { -+ print ("* truncated atom header in trailer\n"); -+ return undef; -+ } -+ if (!seek($fh, -8, SEEK_CUR)) -+ { -+ print ("* seek error in '$kernel_file'\n"); -+ return undef; -+ } -+ $trailer_len -= 8; -+ -+ my $atom_hdr; -+ sysread($fh, $atom_hdr, 8); -+ my ($atom_len, $atom_type) = unpack('Va4', $atom_hdr); -+ -+ if ($trailer_len < $atom_len) -+ { -+ print ("* truncated atom data in trailer\n"); -+ return undef; -+ } -+ -+ my $rounded_len = (($atom_len + 3) & ~3); -+ if (!seek($fh, -(8 + $rounded_len), SEEK_CUR)) -+ { -+ print ("* seek error in '$kernel_file'\n"); -+ return undef; -+ } -+ $trailer_len -= $rounded_len; -+ -+ my $atom_data; -+ sysread($fh, $atom_data, $atom_len); -+ -+ if (!seek($fh, -$atom_len, SEEK_CUR)) -+ { -+ print ("* seek error in '$kernel_file'\n"); -+ return undef; -+ } -+ -+ push @$atoms, [ $atom_type, $atom_data ]; -+ } -+ -+ if (($$atoms[-1][0] eq "\x00\x00\x00\x00") && -+ ($$atoms[-1][1] eq "")) -+ { -+ pop @$atoms; -+ } -+ else -+ { -+ print ("* end marker missing from trailer\n"); -+ } -+ -+ return ($atoms, tell($fh)); -+} -+ -+sub format_atom -+{ -+ my ($atom) = @_; -+ -+ my $format_func = $atom_formats{$atom->[0]} || \&format_hex; -+ return $format_func->($atom->[1]); -+} -+ -+sub format_bool -+{ -+ my ($data) = @_; -+ return unpack('V', $data) ? 'y' : 'n'; -+} -+ -+sub format_int -+{ -+ my ($data) = @_; -+ return unpack('V', $data); -+} -+ -+sub format_string -+{ -+ my ($data) = @_; -+ return '"'.$data.'"'; -+} -+ -+sub format_hex -+{ -+ my ($data) = @_; -+ return unpack('H*', $data); -+} ---- /dev/null -+++ b/scripts/mkknlimg -@@ -0,0 +1,264 @@ -+#!/usr/bin/env perl -+# ---------------------------------------------------------------------- -+# mkknlimg by Phil Elwell for Raspberry Pi -+# based on extract-ikconfig by Dick Streefland -+# -+# (c) 2009,2010 Dick Streefland -+# (c) 2014,2015 Raspberry Pi (Trading) Limited -+# -+# Licensed under the terms of the GNU General Public License. -+# ---------------------------------------------------------------------- -+ -+use strict; -+use warnings; -+use integer; -+ -+use constant FLAG_PI => 0x01; -+use constant FLAG_DTOK => 0x02; -+use constant FLAG_DDTK => 0x04; -+use constant FLAG_270X => 0x08; -+use constant FLAG_283X => 0x10; -+ -+my $trailer_magic = 'RPTL'; -+ -+my $tmpfile1 = "/tmp/mkknlimg_$$.1"; -+my $tmpfile2 = "/tmp/mkknlimg_$$.2"; -+ -+my $dtok = 0; -+my $ddtk = 0; -+my $is_270x = 0; -+my $is_283x = 0; -+ -+while (@ARGV && ($ARGV[0] =~ /^-/)) -+{ -+ my $arg = shift(@ARGV); -+ if ($arg eq '--dtok') -+ { -+ $dtok = 1; -+ } -+ elsif ($arg eq '--ddtk') -+ { -+ $ddtk = 1; -+ } -+ elsif ($arg eq '--270x') -+ { -+ $is_270x = 1; -+ } -+ elsif ($arg eq '--283x') -+ { -+ $is_283x = 1; -+ } -+ else -+ { -+ print ("* Unknown option '$arg'\n"); -+ usage(); -+ } -+} -+ -+usage() if (@ARGV != 2); -+ -+my $kernel_file = $ARGV[0]; -+my $out_file = $ARGV[1]; -+ -+if (! -r $kernel_file) -+{ -+ print ("* File '$kernel_file' not found\n"); -+ usage(); -+} -+ -+my $wanted_strings = -+{ -+ 'bcm2708_fb' => FLAG_PI, -+ 'brcm,bcm2835-mmc' => FLAG_PI, -+ 'brcm,bcm2835-sdhost' => FLAG_PI, -+ 'brcm,bcm2708-pinctrl' => FLAG_PI | FLAG_DTOK, -+ 'brcm,bcm2835-gpio' => FLAG_PI | FLAG_DTOK, -+ 'brcm,bcm2708' => FLAG_PI | FLAG_DTOK | FLAG_270X, -+ 'brcm,bcm2709' => FLAG_PI | FLAG_DTOK | FLAG_270X, -+ 'brcm,bcm2835' => FLAG_PI | FLAG_DTOK | FLAG_283X, -+ 'brcm,bcm2836' => FLAG_PI | FLAG_DTOK | FLAG_283X, -+ 'of_cfs_init' => FLAG_DTOK | FLAG_DDTK, -+ 'vc_cma_init' => FLAG_PI | FLAG_270X, -+}; -+ -+my $res = try_extract($kernel_file, $tmpfile1); -+$res ||= try_decompress('\037\213\010', 'xy', 'gunzip', 0, -+ $kernel_file, $tmpfile1, $tmpfile2); -+$res ||= try_decompress('\3757zXZ\000', 'abcde', 'unxz --single-stream', -1, -+ $kernel_file, $tmpfile1, $tmpfile2); -+$res ||= try_decompress('BZh', 'xy', 'bunzip2', 0, -+ $kernel_file, $tmpfile1, $tmpfile2); -+$res ||= try_decompress('\135\0\0\0', 'xxx', 'unlzma', 0, -+ $kernel_file, $tmpfile1, $tmpfile2); -+$res ||= try_decompress('\211\114\132', 'xy', 'lzop -d', 0, -+ $kernel_file, $tmpfile1, $tmpfile2); -+$res ||= try_decompress('\002\041\114\030', 'xy', 'lz4 -d', 1, -+ $kernel_file, $tmpfile1, $tmpfile2); -+ -+my $append_trailer; -+my $trailer; -+my $kver = '?'; -+ -+$append_trailer = 1; -+ -+if ($res) -+{ -+ $kver = $res->{'kver'} || '?'; -+ my $flags = $res->{'flags'}; -+ print("Version: $kver\n"); -+ -+ if ($flags & FLAG_PI) -+ { -+ $dtok ||= ($flags & FLAG_DTOK) != 0; -+ $is_270x ||= ($flags & FLAG_270X) != 0; -+ $is_283x ||= ($flags & FLAG_283X) != 0; -+ $ddtk ||= ($flags & FLAG_DDTK) != 0; -+ } -+ else -+ { -+ print ("* This doesn't look like a Raspberry Pi kernel.\n"); -+ } -+} -+elsif (!$dtok) -+{ -+ print ("* Is this a valid kernel?\n"); -+} -+ -+if ($append_trailer) -+{ -+ printf("DT: %s\n", $dtok ? "y" : "n"); -+ printf("DDT: %s\n", $ddtk ? "y" : "n"); -+ printf("270x: %s\n", $is_270x ? "y" : "n"); -+ printf("283x: %s\n", $is_283x ? "y" : "n"); -+ -+ my @atoms; -+ -+ push @atoms, [ $trailer_magic, pack('V', 0) ]; -+ push @atoms, [ 'KVer', $kver ]; -+ push @atoms, [ 'DTOK', pack('V', $dtok) ]; -+ push @atoms, [ 'DDTK', pack('V', $ddtk) ]; -+ push @atoms, [ '270X', pack('V', $is_270x) ]; -+ push @atoms, [ '283X', pack('V', $is_283x) ]; -+ push @atoms, [ '283x', pack('V', $is_283x && !$is_270x) ]; -+ -+ $trailer = pack_trailer(\@atoms); -+ $atoms[0]->[1] = pack('V', length($trailer)); -+ -+ $trailer = pack_trailer(\@atoms); -+} -+ -+my $ofh; -+my $total_len = 0; -+ -+if ($out_file eq $kernel_file) -+{ -+ die "* Failed to open '$out_file' for append\n" -+ if (!open($ofh, '>>', $out_file)); -+ $total_len = tell($ofh); -+} -+else -+{ -+ die "* Failed to open '$kernel_file'\n" -+ if (!open(my $ifh, '<', $kernel_file)); -+ die "* Failed to create '$out_file'\n" -+ if (!open($ofh, '>', $out_file)); -+ -+ my $copybuf; -+ while (1) -+ { -+ my $bytes = sysread($ifh, $copybuf, 64*1024); -+ last if (!$bytes); -+ syswrite($ofh, $copybuf, $bytes); -+ $total_len += $bytes; -+ } -+ close($ifh); -+} -+ -+if ($trailer) -+{ -+ # Pad to word-alignment -+ syswrite($ofh, "\x000\x000\x000", (-$total_len & 0x3)); -+ syswrite($ofh, $trailer); -+} -+ -+close($ofh); -+ -+exit($trailer ? 0 : 1); -+ -+END { -+ unlink($tmpfile1) if ($tmpfile1); -+ unlink($tmpfile2) if ($tmpfile2); -+} -+ -+ -+sub usage -+{ -+ print ("Usage: mkknlimg [--dtok] [--270x] [--283x] \n"); -+ exit(1); -+} -+ -+sub try_extract -+{ -+ my ($knl, $tmp) = @_; -+ -+ my $ver = `strings "$knl" | grep -a -E "^Linux version [1-9]"`; -+ -+ return undef if (!$ver); -+ -+ chomp($ver); -+ -+ my $res = { 'kver'=>$ver }; -+ $res->{'flags'} = strings_to_flags($knl, $wanted_strings); -+ -+ return $res; -+} -+ -+ -+sub try_decompress -+{ -+ my ($magic, $subst, $zcat, $idx, $knl, $tmp1, $tmp2) = @_; -+ -+ my $pos = `tr "$magic\n$subst" "\n$subst=" < "$knl" | grep -abo "^$subst"`; -+ if ($pos) -+ { -+ chomp($pos); -+ $pos = (split(/[\r\n]+/, $pos))[$idx]; -+ return undef if (!defined($pos)); -+ $pos =~ s/:.*[\r\n]*$//s; -+ my $cmd = "tail -c+$pos \"$knl\" | $zcat > $tmp2 2> /dev/null"; -+ my $err = (system($cmd) >> 8); -+ return undef if (($err != 0) && ($err != 2)); -+ -+ return try_extract($tmp2, $tmp1); -+ } -+ -+ return undef; -+} -+ -+sub strings_to_flags -+{ -+ my ($knl, $strings) = @_; -+ my $string_pattern = '^('.join('|', keys(%$strings)).')$'; -+ my $flags = 0; -+ -+ my @matches = `strings \"$knl\" | grep -E \"$string_pattern\"`; -+ foreach my $match (@matches) -+ { -+ chomp($match); -+ $flags |= $strings->{$match}; -+ } -+ -+ return $flags; -+} -+ -+sub pack_trailer -+{ -+ my ($atoms) = @_; -+ my $trailer = pack('VV', 0, 0); -+ for (my $i = $#$atoms; $i>=0; $i--) -+ { -+ my $atom = $atoms->[$i]; -+ $trailer .= pack('a*x!4Va4', $atom->[1], length($atom->[1]), $atom->[0]); -+ } -+ return $trailer; -+} diff --git a/target/linux/brcm2708/patches-4.9/0053-scripts-dtc-Update-to-upstream-version-1.4.1.patch b/target/linux/brcm2708/patches-4.9/0053-scripts-dtc-Update-to-upstream-version-1.4.1.patch deleted file mode 100644 index ed4b27092b4d..000000000000 --- a/target/linux/brcm2708/patches-4.9/0053-scripts-dtc-Update-to-upstream-version-1.4.1.patch +++ /dev/null @@ -1,2833 +0,0 @@ -From 61ad4b70c72fd7d1d3930b50e180d9727eeae150 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 10 Aug 2015 09:49:15 +0100 -Subject: [PATCH] scripts/dtc: Update to upstream version 1.4.1 - -Includes the new localfixups format. - -Signed-off-by: Phil Elwell - -scripts/dtc: Fix UMR causing corrupt dtbo overlay files - -struct fixup_entry is allocated from the heap but it's member -local_fixup_generated was never initialized. This lead to -corrupted dtbo files. - -Fix this by initializing local_fixup_generated to false. - -Signed-off-by: Matthias Reichl - -scripts/dtc: Only emit local fixups for overlays - -Signed-off-by: Phil Elwell ---- - scripts/dtc/checks.c | 106 +++++- - scripts/dtc/dtc-lexer.l | 5 + - scripts/dtc/dtc-lexer.lex.c_shipped | 537 +++++++++++++------------- - scripts/dtc/dtc-parser.tab.c_shipped | 714 ++++++++++++++++++----------------- - scripts/dtc/dtc-parser.tab.h_shipped | 46 +-- - scripts/dtc/dtc-parser.y | 22 +- - scripts/dtc/dtc.c | 9 +- - scripts/dtc/dtc.h | 40 ++ - scripts/dtc/flattree.c | 202 ++++++++++ - scripts/dtc/version_gen.h | 2 +- - 10 files changed, 1029 insertions(+), 654 deletions(-) - ---- a/scripts/dtc/checks.c -+++ b/scripts/dtc/checks.c -@@ -482,6 +482,8 @@ static void fixup_phandle_references(str - struct node *node, struct property *prop) - { - struct marker *m = prop->val.markers; -+ struct fixup *f, **fp; -+ struct fixup_entry *fe, **fep; - struct node *refnode; - cell_t phandle; - -@@ -490,11 +492,70 @@ static void fixup_phandle_references(str - - refnode = get_node_by_ref(dt, m->ref); - if (! refnode) { -- FAIL(c, "Reference to non-existent node or label \"%s\"\n", -- m->ref); -+ if (!dt->is_plugin) { -+ FAIL(c, "Reference to non-existent node or label \"%s\"\n", -+ m->ref); -+ continue; -+ } -+ -+ /* allocate fixup entry */ -+ fe = xmalloc(sizeof(*fe)); -+ -+ fe->node = node; -+ fe->prop = prop; -+ fe->offset = m->offset; -+ fe->next = NULL; -+ -+ /* search for an already existing fixup */ -+ for_each_fixup(dt, f) -+ if (strcmp(f->ref, m->ref) == 0) -+ break; -+ -+ /* no fixup found, add new */ -+ if (f == NULL) { -+ f = xmalloc(sizeof(*f)); -+ f->ref = m->ref; -+ f->entries = NULL; -+ f->next = NULL; -+ -+ /* add it to the tree */ -+ fp = &dt->fixups; -+ while (*fp) -+ fp = &(*fp)->next; -+ *fp = f; -+ } -+ -+ /* and now append fixup entry */ -+ fep = &f->entries; -+ while (*fep) -+ fep = &(*fep)->next; -+ *fep = fe; -+ -+ /* mark the entry as unresolved */ -+ *((cell_t *)(prop->val.val + m->offset)) = -+ cpu_to_fdt32(0xdeadbeef); - continue; - } - -+ /* if it's a local reference, we need to record it */ -+ if (symbol_fixup_support && dt->is_plugin) { -+ -+ /* allocate a new local fixup entry */ -+ fe = xmalloc(sizeof(*fe)); -+ -+ fe->node = node; -+ fe->prop = prop; -+ fe->offset = m->offset; -+ fe->next = NULL; -+ fe->local_fixup_generated = false; -+ -+ /* append it to the local fixups */ -+ fep = &dt->local_fixups; -+ while (*fep) -+ fep = &(*fep)->next; -+ *fep = fe; -+ } -+ - phandle = get_node_phandle(dt, refnode); - *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle); - } -@@ -676,6 +737,45 @@ static void check_obsolete_chosen_interr - } - TREE_WARNING(obsolete_chosen_interrupt_controller, NULL); - -+static void check_auto_label_phandles(struct check *c, struct node *dt, -+ struct node *node) -+{ -+ struct label *l; -+ struct symbol *s, **sp; -+ int has_label; -+ -+ if (!symbol_fixup_support) -+ return; -+ -+ has_label = 0; -+ for_each_label(node->labels, l) { -+ has_label = 1; -+ break; -+ } -+ -+ if (!has_label) -+ return; -+ -+ /* force allocation of a phandle for this node */ -+ (void)get_node_phandle(dt, node); -+ -+ /* add the symbol */ -+ for_each_label(node->labels, l) { -+ -+ s = xmalloc(sizeof(*s)); -+ s->label = l; -+ s->node = node; -+ s->next = NULL; -+ -+ /* add it to the symbols list */ -+ sp = &dt->symbols; -+ while (*sp) -+ sp = &((*sp)->next); -+ *sp = s; -+ } -+} -+NODE_WARNING(auto_label_phandles, NULL); -+ - static struct check *check_table[] = { - &duplicate_node_names, &duplicate_property_names, - &node_name_chars, &node_name_format, &property_name_chars, -@@ -696,6 +796,8 @@ static struct check *check_table[] = { - &avoid_default_addr_size, - &obsolete_chosen_interrupt_controller, - -+ &auto_label_phandles, -+ - &always_fail, - }; - ---- a/scripts/dtc/dtc-lexer.l -+++ b/scripts/dtc/dtc-lexer.l -@@ -121,6 +121,11 @@ static void lexical_error(const char *fm - return DT_V1; - } - -+<*>"/plugin/" { -+ DPRINT("Keyword: /plugin/\n"); -+ return DT_PLUGIN; -+ } -+ - <*>"/memreserve/" { - DPRINT("Keyword: /memreserve/\n"); - BEGIN_DEFAULT(); ---- a/scripts/dtc/dtc-lexer.lex.c_shipped -+++ b/scripts/dtc/dtc-lexer.lex.c_shipped -@@ -9,7 +9,7 @@ - #define FLEX_SCANNER - #define YY_FLEX_MAJOR_VERSION 2 - #define YY_FLEX_MINOR_VERSION 5 --#define YY_FLEX_SUBMINOR_VERSION 39 -+#define YY_FLEX_SUBMINOR_VERSION 35 - #if YY_FLEX_SUBMINOR_VERSION > 0 - #define FLEX_BETA - #endif -@@ -162,12 +162,7 @@ typedef unsigned int flex_uint32_t; - typedef struct yy_buffer_state *YY_BUFFER_STATE; - #endif - --#ifndef YY_TYPEDEF_YY_SIZE_T --#define YY_TYPEDEF_YY_SIZE_T --typedef size_t yy_size_t; --#endif -- --extern yy_size_t yyleng; -+extern int yyleng; - - extern FILE *yyin, *yyout; - -@@ -176,7 +171,6 @@ extern FILE *yyin, *yyout; - #define EOB_ACT_LAST_MATCH 2 - - #define YY_LESS_LINENO(n) -- #define YY_LINENO_REWIND_TO(ptr) - - /* Return all but the first "n" matched characters back to the input stream. */ - #define yyless(n) \ -@@ -194,6 +188,11 @@ extern FILE *yyin, *yyout; - - #define unput(c) yyunput( c, (yytext_ptr) ) - -+#ifndef YY_TYPEDEF_YY_SIZE_T -+#define YY_TYPEDEF_YY_SIZE_T -+typedef size_t yy_size_t; -+#endif -+ - #ifndef YY_STRUCT_YY_BUFFER_STATE - #define YY_STRUCT_YY_BUFFER_STATE - struct yy_buffer_state -@@ -211,7 +210,7 @@ struct yy_buffer_state - /* Number of characters read into yy_ch_buf, not including EOB - * characters. - */ -- yy_size_t yy_n_chars; -+ int yy_n_chars; - - /* Whether we "own" the buffer - i.e., we know we created it, - * and can realloc() it to grow it, and should free() it to -@@ -281,8 +280,8 @@ static YY_BUFFER_STATE * yy_buffer_stack - - /* yy_hold_char holds the character lost when yytext is formed. */ - static char yy_hold_char; --static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ --yy_size_t yyleng; -+static int yy_n_chars; /* number of characters read into yy_ch_buf */ -+int yyleng; - - /* Points to current character in buffer. */ - static char *yy_c_buf_p = (char *) 0; -@@ -310,7 +309,7 @@ static void yy_init_buffer (YY_BUFFER_ST - - YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); - YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); --YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len ); -+YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len ); - - void *yyalloc (yy_size_t ); - void *yyrealloc (void *,yy_size_t ); -@@ -342,7 +341,7 @@ void yyfree (void * ); - - /* Begin user sect3 */ - --#define yywrap() 1 -+#define yywrap(n) 1 - #define YY_SKIP_YYWRAP - - typedef unsigned char YY_CHAR; -@@ -373,8 +372,8 @@ static void yy_fatal_error (yyconst char - *yy_cp = '\0'; \ - (yy_c_buf_p) = yy_cp; - --#define YY_NUM_RULES 30 --#define YY_END_OF_BUFFER 31 -+#define YY_NUM_RULES 31 -+#define YY_END_OF_BUFFER 32 - /* This struct is not used in this scanner, - but its presence is necessary. */ - struct yy_trans_info -@@ -382,25 +381,26 @@ struct yy_trans_info - flex_int32_t yy_verify; - flex_int32_t yy_nxt; - }; --static yyconst flex_int16_t yy_accept[159] = -+static yyconst flex_int16_t yy_accept[166] = - { 0, -- 0, 0, 0, 0, 0, 0, 0, 0, 31, 29, -- 18, 18, 29, 29, 29, 29, 29, 29, 29, 29, -- 29, 29, 29, 29, 29, 29, 15, 16, 16, 29, -- 16, 10, 10, 18, 26, 0, 3, 0, 27, 12, -- 0, 0, 11, 0, 0, 0, 0, 0, 0, 0, -- 21, 23, 25, 24, 22, 0, 9, 28, 0, 0, -- 0, 14, 14, 16, 16, 16, 10, 10, 10, 0, -- 12, 0, 11, 0, 0, 0, 20, 0, 0, 0, -- 0, 0, 0, 0, 0, 16, 10, 10, 10, 0, -- 13, 19, 0, 0, 0, 0, 0, 0, 0, 0, -- -- 0, 16, 0, 0, 0, 0, 0, 0, 0, 0, -- 0, 16, 6, 0, 0, 0, 0, 0, 0, 2, -- 0, 0, 0, 0, 0, 0, 0, 0, 4, 17, -- 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, -- 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, -- 5, 8, 0, 0, 0, 0, 7, 0 -+ 0, 0, 0, 0, 0, 0, 0, 0, 32, 30, -+ 19, 19, 30, 30, 30, 30, 30, 30, 30, 30, -+ 30, 30, 30, 30, 30, 30, 16, 17, 17, 30, -+ 17, 11, 11, 19, 27, 0, 3, 0, 28, 13, -+ 0, 0, 12, 0, 0, 0, 0, 0, 0, 0, -+ 0, 22, 24, 26, 25, 23, 0, 10, 29, 0, -+ 0, 0, 15, 15, 17, 17, 17, 11, 11, 11, -+ 0, 13, 0, 12, 0, 0, 0, 21, 0, 0, -+ 0, 0, 0, 0, 0, 0, 0, 17, 11, 11, -+ 11, 0, 14, 20, 0, 0, 0, 0, 0, 0, -+ -+ 0, 0, 0, 0, 17, 0, 0, 0, 0, 0, -+ 0, 0, 0, 0, 0, 17, 7, 0, 0, 0, -+ 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, -+ 0, 0, 0, 0, 4, 18, 0, 0, 5, 2, -+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -+ 0, 0, 1, 0, 0, 0, 0, 6, 9, 0, -+ 0, 0, 0, 8, 0 - } ; - - static yyconst flex_int32_t yy_ec[256] = -@@ -416,9 +416,9 @@ static yyconst flex_int32_t yy_ec[256] = - 22, 22, 22, 22, 24, 22, 22, 25, 22, 22, - 1, 26, 27, 1, 22, 1, 21, 28, 29, 30, - -- 31, 21, 22, 22, 32, 22, 22, 33, 34, 35, -- 36, 37, 22, 38, 39, 40, 41, 42, 22, 25, -- 43, 22, 44, 45, 46, 1, 1, 1, 1, 1, -+ 31, 21, 32, 22, 33, 22, 22, 34, 35, 36, -+ 37, 38, 22, 39, 40, 41, 42, 43, 22, 25, -+ 44, 22, 45, 46, 47, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, -@@ -435,163 +435,165 @@ static yyconst flex_int32_t yy_ec[256] = - 1, 1, 1, 1, 1 - } ; - --static yyconst flex_int32_t yy_meta[47] = -+static yyconst flex_int32_t yy_meta[48] = - { 0, - 1, 1, 1, 1, 1, 1, 2, 3, 1, 2, - 2, 2, 4, 5, 5, 5, 6, 1, 1, 1, - 7, 8, 8, 8, 8, 1, 1, 7, 7, 7, - 7, 8, 8, 8, 8, 8, 8, 8, 8, 8, -- 8, 8, 8, 3, 1, 4 -+ 8, 8, 8, 8, 3, 1, 4 - } ; - --static yyconst flex_int16_t yy_base[173] = -+static yyconst flex_int16_t yy_base[180] = - { 0, -- 0, 383, 34, 382, 65, 381, 37, 105, 387, 391, -- 54, 111, 367, 110, 109, 109, 112, 41, 366, 104, -- 367, 338, 124, 117, 0, 144, 391, 0, 121, 0, -- 135, 155, 140, 179, 391, 160, 391, 379, 391, 0, -- 368, 141, 391, 167, 370, 376, 346, 103, 342, 345, -- 391, 391, 391, 391, 391, 358, 391, 391, 175, 342, -- 338, 391, 355, 0, 185, 339, 184, 347, 346, 0, -- 0, 322, 175, 357, 175, 363, 352, 324, 330, 323, -- 332, 326, 201, 324, 329, 322, 391, 333, 181, 309, -- 391, 341, 340, 313, 320, 338, 178, 311, 146, 317, -- -- 314, 315, 335, 331, 303, 300, 309, 299, 308, 188, -- 336, 335, 391, 305, 320, 281, 283, 271, 203, 288, -- 281, 271, 266, 264, 245, 242, 208, 104, 391, 391, -- 244, 218, 204, 219, 206, 224, 201, 212, 204, 229, -- 215, 208, 207, 200, 219, 391, 233, 221, 200, 181, -- 391, 391, 149, 122, 86, 41, 391, 391, 245, 251, -- 259, 263, 267, 273, 280, 284, 292, 300, 304, 310, -- 318, 326 -+ 0, 393, 35, 392, 66, 391, 38, 107, 397, 401, -+ 55, 113, 377, 112, 111, 111, 114, 42, 376, 106, -+ 377, 347, 126, 120, 0, 147, 401, 0, 124, 0, -+ 137, 158, 170, 163, 401, 153, 401, 389, 401, 0, -+ 378, 120, 401, 131, 380, 386, 355, 139, 351, 355, -+ 351, 401, 401, 401, 401, 401, 367, 401, 401, 185, -+ 350, 346, 401, 364, 0, 185, 347, 189, 356, 355, -+ 0, 0, 330, 180, 366, 141, 372, 361, 332, 338, -+ 331, 341, 334, 326, 205, 331, 337, 329, 401, 341, -+ 167, 316, 401, 349, 348, 320, 328, 346, 180, 318, -+ -+ 324, 209, 324, 320, 322, 342, 338, 309, 306, 315, -+ 305, 315, 312, 192, 342, 341, 401, 293, 306, 282, -+ 268, 252, 255, 203, 285, 282, 272, 268, 252, 233, -+ 232, 239, 208, 107, 401, 401, 238, 211, 401, 211, -+ 212, 208, 228, 203, 215, 207, 233, 222, 212, 211, -+ 203, 227, 401, 237, 225, 204, 185, 401, 401, 149, -+ 128, 88, 42, 401, 401, 253, 259, 267, 271, 275, -+ 281, 288, 292, 300, 308, 312, 318, 326, 334 - } ; - --static yyconst flex_int16_t yy_def[173] = -+static yyconst flex_int16_t yy_def[180] = - { 0, -- 158, 1, 1, 3, 158, 5, 1, 1, 158, 158, -- 158, 158, 158, 159, 160, 161, 158, 158, 158, 158, -- 162, 158, 158, 158, 163, 162, 158, 164, 165, 164, -- 164, 158, 158, 158, 158, 159, 158, 159, 158, 166, -- 158, 161, 158, 161, 167, 168, 158, 158, 158, 158, -- 158, 158, 158, 158, 158, 162, 158, 158, 158, 158, -- 158, 158, 162, 164, 165, 164, 158, 158, 158, 169, -- 166, 170, 161, 167, 167, 168, 158, 158, 158, 158, -- 158, 158, 158, 158, 158, 164, 158, 158, 169, 170, -- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, -- -- 158, 164, 158, 158, 158, 158, 158, 158, 158, 171, -- 158, 164, 158, 158, 158, 158, 158, 158, 171, 158, -- 171, 158, 158, 158, 158, 158, 158, 158, 158, 158, -- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, -- 172, 158, 158, 158, 172, 158, 172, 158, 158, 158, -- 158, 158, 158, 158, 158, 158, 158, 0, 158, 158, -- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, -- 158, 158 -+ 165, 1, 1, 3, 165, 5, 1, 1, 165, 165, -+ 165, 165, 165, 166, 167, 168, 165, 165, 165, 165, -+ 169, 165, 165, 165, 170, 169, 165, 171, 172, 171, -+ 171, 165, 165, 165, 165, 166, 165, 166, 165, 173, -+ 165, 168, 165, 168, 174, 175, 165, 165, 165, 165, -+ 165, 165, 165, 165, 165, 165, 169, 165, 165, 165, -+ 165, 165, 165, 169, 171, 172, 171, 165, 165, 165, -+ 176, 173, 177, 168, 174, 174, 175, 165, 165, 165, -+ 165, 165, 165, 165, 165, 165, 165, 171, 165, 165, -+ 176, 177, 165, 165, 165, 165, 165, 165, 165, 165, -+ -+ 165, 165, 165, 165, 171, 165, 165, 165, 165, 165, -+ 165, 165, 165, 178, 165, 171, 165, 165, 165, 165, -+ 165, 165, 165, 178, 165, 178, 165, 165, 165, 165, -+ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, -+ 165, 165, 165, 165, 165, 165, 165, 179, 165, 165, -+ 165, 179, 165, 179, 165, 165, 165, 165, 165, 165, -+ 165, 165, 165, 165, 0, 165, 165, 165, 165, 165, -+ 165, 165, 165, 165, 165, 165, 165, 165, 165 - } ; - --static yyconst flex_int16_t yy_nxt[438] = -+static yyconst flex_int16_t yy_nxt[449] = - { 0, - 10, 11, 12, 11, 13, 14, 10, 15, 16, 10, - 10, 10, 17, 10, 10, 10, 10, 18, 19, 20, - 21, 21, 21, 21, 21, 10, 10, 21, 21, 21, - 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, -- 21, 21, 21, 10, 22, 10, 24, 25, 25, 25, -- 32, 33, 33, 157, 26, 34, 34, 34, 51, 52, -- 27, 26, 26, 26, 26, 10, 11, 12, 11, 13, -- 14, 28, 15, 16, 28, 28, 28, 24, 28, 28, -- 28, 10, 18, 19, 20, 29, 29, 29, 29, 29, -- 30, 10, 29, 29, 29, 29, 29, 29, 29, 29, -- -- 29, 29, 29, 29, 29, 29, 29, 29, 10, 22, -- 10, 23, 34, 34, 34, 37, 39, 43, 32, 33, -- 33, 45, 54, 55, 46, 59, 45, 64, 156, 46, -- 64, 64, 64, 79, 44, 38, 59, 57, 134, 47, -- 135, 48, 80, 49, 47, 50, 48, 99, 61, 43, -- 50, 110, 41, 67, 67, 67, 60, 63, 63, 63, -- 57, 155, 68, 69, 63, 37, 44, 66, 67, 67, -- 67, 63, 63, 63, 63, 73, 59, 68, 69, 70, -- 34, 34, 34, 43, 75, 38, 154, 92, 83, 83, -- 83, 64, 44, 120, 64, 64, 64, 67, 67, 67, -- -- 44, 57, 99, 68, 69, 107, 68, 69, 120, 127, -- 108, 153, 152, 121, 83, 83, 83, 133, 133, 133, -- 146, 133, 133, 133, 146, 140, 140, 140, 121, 141, -- 140, 140, 140, 151, 141, 158, 150, 149, 148, 144, -- 147, 143, 142, 139, 147, 36, 36, 36, 36, 36, -- 36, 36, 36, 40, 138, 137, 136, 40, 40, 42, -- 42, 42, 42, 42, 42, 42, 42, 56, 56, 56, -- 56, 62, 132, 62, 64, 131, 130, 64, 129, 64, -- 64, 65, 128, 158, 65, 65, 65, 65, 71, 127, -- 71, 71, 74, 74, 74, 74, 74, 74, 74, 74, -- -- 76, 76, 76, 76, 76, 76, 76, 76, 89, 126, -- 89, 90, 125, 90, 90, 124, 90, 90, 119, 119, -- 119, 119, 119, 119, 119, 119, 145, 145, 145, 145, -- 145, 145, 145, 145, 123, 122, 59, 59, 118, 117, -- 116, 115, 114, 113, 45, 112, 108, 111, 109, 106, -- 105, 104, 46, 103, 91, 87, 102, 101, 100, 98, -- 97, 96, 95, 94, 93, 77, 75, 91, 88, 87, -- 86, 57, 85, 84, 57, 82, 81, 78, 77, 75, -- 72, 158, 58, 57, 53, 35, 158, 31, 23, 23, -- 9, 158, 158, 158, 158, 158, 158, 158, 158, 158, -- -- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, -- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, -- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, -- 158, 158, 158, 158, 158, 158, 158 -+ 21, 21, 21, 21, 10, 22, 10, 24, 25, 25, -+ 25, 32, 33, 33, 164, 26, 34, 34, 34, 52, -+ 53, 27, 26, 26, 26, 26, 10, 11, 12, 11, -+ 13, 14, 28, 15, 16, 28, 28, 28, 24, 28, -+ 28, 28, 10, 18, 19, 20, 29, 29, 29, 29, -+ 29, 30, 10, 29, 29, 29, 29, 29, 29, 29, -+ -+ 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, -+ 10, 22, 10, 23, 34, 34, 34, 37, 39, 43, -+ 32, 33, 33, 45, 55, 56, 46, 60, 43, 45, -+ 65, 163, 46, 65, 65, 65, 44, 38, 60, 74, -+ 58, 47, 141, 48, 142, 44, 49, 47, 50, 48, -+ 76, 51, 62, 94, 50, 41, 44, 51, 37, 61, -+ 64, 64, 64, 58, 34, 34, 34, 64, 162, 80, -+ 67, 68, 68, 68, 64, 64, 64, 64, 38, 81, -+ 69, 70, 71, 68, 68, 68, 60, 161, 43, 69, -+ 70, 65, 69, 70, 65, 65, 65, 125, 85, 85, -+ -+ 85, 58, 68, 68, 68, 44, 102, 110, 125, 133, -+ 102, 69, 70, 111, 114, 160, 159, 126, 85, 85, -+ 85, 140, 140, 140, 140, 140, 140, 153, 126, 147, -+ 147, 147, 153, 148, 147, 147, 147, 158, 148, 165, -+ 157, 156, 155, 151, 150, 149, 146, 154, 145, 144, -+ 143, 139, 154, 36, 36, 36, 36, 36, 36, 36, -+ 36, 40, 138, 137, 136, 40, 40, 42, 42, 42, -+ 42, 42, 42, 42, 42, 57, 57, 57, 57, 63, -+ 135, 63, 65, 134, 165, 65, 133, 65, 65, 66, -+ 132, 131, 66, 66, 66, 66, 72, 130, 72, 72, -+ -+ 75, 75, 75, 75, 75, 75, 75, 75, 77, 77, -+ 77, 77, 77, 77, 77, 77, 91, 129, 91, 92, -+ 128, 92, 92, 127, 92, 92, 124, 124, 124, 124, -+ 124, 124, 124, 124, 152, 152, 152, 152, 152, 152, -+ 152, 152, 60, 60, 123, 122, 121, 120, 119, 118, -+ 117, 45, 116, 111, 115, 113, 112, 109, 108, 107, -+ 46, 106, 93, 89, 105, 104, 103, 101, 100, 99, -+ 98, 97, 96, 95, 78, 76, 93, 90, 89, 88, -+ 58, 87, 86, 58, 84, 83, 82, 79, 78, 76, -+ 73, 165, 59, 58, 54, 35, 165, 31, 23, 23, -+ -+ 9, 165, 165, 165, 165, 165, 165, 165, 165, 165, -+ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, -+ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, -+ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, -+ 165, 165, 165, 165, 165, 165, 165, 165 - } ; - --static yyconst flex_int16_t yy_chk[438] = -+static yyconst flex_int16_t yy_chk[449] = - { 0, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, -- 1, 1, 1, 1, 1, 1, 3, 3, 3, 3, -- 7, 7, 7, 156, 3, 11, 11, 11, 18, 18, -- 3, 3, 3, 3, 3, 5, 5, 5, 5, 5, -+ 1, 1, 1, 1, 1, 1, 1, 3, 3, 3, -+ 3, 7, 7, 7, 163, 3, 11, 11, 11, 18, -+ 18, 3, 3, 3, 3, 3, 5, 5, 5, 5, - 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, - 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, - 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, - - 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, -- 5, 8, 12, 12, 12, 14, 15, 16, 8, 8, -- 8, 17, 20, 20, 17, 23, 24, 29, 155, 24, -- 29, 29, 29, 48, 16, 14, 31, 29, 128, 17, -- 128, 17, 48, 17, 24, 17, 24, 99, 24, 42, -- 24, 99, 15, 33, 33, 33, 23, 26, 26, 26, -- 26, 154, 33, 33, 26, 36, 42, 31, 32, 32, -- 32, 26, 26, 26, 26, 44, 59, 32, 32, 32, -- 34, 34, 34, 73, 75, 36, 153, 75, 59, 59, -- 59, 65, 44, 110, 65, 65, 65, 67, 67, 67, -- -- 73, 65, 83, 89, 89, 97, 67, 67, 119, 127, -- 97, 150, 149, 110, 83, 83, 83, 133, 133, 133, -- 141, 127, 127, 127, 145, 136, 136, 136, 119, 136, -- 140, 140, 140, 148, 140, 147, 144, 143, 142, 139, -- 141, 138, 137, 135, 145, 159, 159, 159, 159, 159, -- 159, 159, 159, 160, 134, 132, 131, 160, 160, 161, -- 161, 161, 161, 161, 161, 161, 161, 162, 162, 162, -- 162, 163, 126, 163, 164, 125, 124, 164, 123, 164, -- 164, 165, 122, 121, 165, 165, 165, 165, 166, 120, -- 166, 166, 167, 167, 167, 167, 167, 167, 167, 167, -- -- 168, 168, 168, 168, 168, 168, 168, 168, 169, 118, -- 169, 170, 117, 170, 170, 116, 170, 170, 171, 171, -- 171, 171, 171, 171, 171, 171, 172, 172, 172, 172, -- 172, 172, 172, 172, 115, 114, 112, 111, 109, 108, -- 107, 106, 105, 104, 103, 102, 101, 100, 98, 96, -- 95, 94, 93, 92, 90, 88, 86, 85, 84, 82, -- 81, 80, 79, 78, 77, 76, 74, 72, 69, 68, -- 66, 63, 61, 60, 56, 50, 49, 47, 46, 45, -+ 5, 5, 5, 8, 12, 12, 12, 14, 15, 16, -+ 8, 8, 8, 17, 20, 20, 17, 23, 42, 24, -+ 29, 162, 24, 29, 29, 29, 16, 14, 31, 44, -+ 29, 17, 134, 17, 134, 42, 17, 24, 17, 24, -+ 76, 17, 24, 76, 24, 15, 44, 24, 36, 23, -+ 26, 26, 26, 26, 34, 34, 34, 26, 161, 48, -+ 31, 32, 32, 32, 26, 26, 26, 26, 36, 48, -+ 32, 32, 32, 33, 33, 33, 60, 160, 74, 91, -+ 91, 66, 33, 33, 66, 66, 66, 114, 60, 60, -+ -+ 60, 66, 68, 68, 68, 74, 85, 99, 124, 133, -+ 102, 68, 68, 99, 102, 157, 156, 114, 85, 85, -+ 85, 133, 133, 133, 140, 140, 140, 148, 124, 143, -+ 143, 143, 152, 143, 147, 147, 147, 155, 147, 154, -+ 151, 150, 149, 146, 145, 144, 142, 148, 141, 138, -+ 137, 132, 152, 166, 166, 166, 166, 166, 166, 166, -+ 166, 167, 131, 130, 129, 167, 167, 168, 168, 168, -+ 168, 168, 168, 168, 168, 169, 169, 169, 169, 170, -+ 128, 170, 171, 127, 126, 171, 125, 171, 171, 172, -+ 123, 122, 172, 172, 172, 172, 173, 121, 173, 173, -+ -+ 174, 174, 174, 174, 174, 174, 174, 174, 175, 175, -+ 175, 175, 175, 175, 175, 175, 176, 120, 176, 177, -+ 119, 177, 177, 118, 177, 177, 178, 178, 178, 178, -+ 178, 178, 178, 178, 179, 179, 179, 179, 179, 179, -+ 179, 179, 116, 115, 113, 112, 111, 110, 109, 108, -+ 107, 106, 105, 104, 103, 101, 100, 98, 97, 96, -+ 95, 94, 92, 90, 88, 87, 86, 84, 83, 82, -+ 81, 80, 79, 78, 77, 75, 73, 70, 69, 67, -+ 64, 62, 61, 57, 51, 50, 49, 47, 46, 45, - 41, 38, 22, 21, 19, 13, 9, 6, 4, 2, -- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, - -- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, -- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, -- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, -- 158, 158, 158, 158, 158, 158, 158 -+ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, -+ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, -+ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, -+ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, -+ 165, 165, 165, 165, 165, 165, 165, 165 - } ; - - static yy_state_type yy_last_accepting_state; -@@ -662,7 +664,7 @@ static int dts_version = 1; - static void push_input_file(const char *filename); - static bool pop_input_file(void); - static void lexical_error(const char *fmt, ...); --#line 666 "dtc-lexer.lex.c" -+#line 668 "dtc-lexer.lex.c" - - #define INITIAL 0 - #define BYTESTRING 1 -@@ -704,7 +706,7 @@ FILE *yyget_out (void ); - - void yyset_out (FILE * out_str ); - --yy_size_t yyget_leng (void ); -+int yyget_leng (void ); - - char *yyget_text (void ); - -@@ -853,6 +855,10 @@ YY_DECL - register char *yy_cp, *yy_bp; - register int yy_act; - -+#line 68 "dtc-lexer.l" -+ -+#line 861 "dtc-lexer.lex.c" -+ - if ( !(yy_init) ) - { - (yy_init) = 1; -@@ -879,11 +885,6 @@ YY_DECL - yy_load_buffer_state( ); - } - -- { --#line 68 "dtc-lexer.l" -- --#line 886 "dtc-lexer.lex.c" -- - while ( 1 ) /* loops until end-of-file is reached */ - { - yy_cp = (yy_c_buf_p); -@@ -901,7 +902,7 @@ YY_DECL - yy_match: - do - { -- register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; -+ register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; - if ( yy_accept[yy_current_state] ) - { - (yy_last_accepting_state) = yy_current_state; -@@ -910,13 +911,13 @@ yy_match: - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; -- if ( yy_current_state >= 159 ) -+ if ( yy_current_state >= 166 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; - ++yy_cp; - } -- while ( yy_current_state != 158 ); -+ while ( yy_current_state != 165 ); - yy_cp = (yy_last_accepting_cpos); - yy_current_state = (yy_last_accepting_state); - -@@ -951,39 +952,31 @@ case 2: - YY_RULE_SETUP - #line 75 "dtc-lexer.l" - { -- char *line, *fnstart, *fnend; -- struct data fn; -+ char *line, *tmp, *fn; - /* skip text before line # */ - line = yytext; - while (!isdigit((unsigned char)*line)) - line++; -- -- /* regexp ensures that first and list " -- * in the whole yytext are those at -- * beginning and end of the filename string */ -- fnstart = memchr(yytext, '"', yyleng); -- for (fnend = yytext + yyleng - 1; -- *fnend != '"'; fnend--) -- ; -- assert(fnstart && fnend && (fnend > fnstart)); -- -- fn = data_copy_escape_string(fnstart + 1, -- fnend - fnstart - 1); -- -- /* Don't allow nuls in filenames */ -- if (memchr(fn.val, '\0', fn.len - 1)) -- lexical_error("nul in line number directive"); -- -+ /* skip digits in line # */ -+ tmp = line; -+ while (!isspace((unsigned char)*tmp)) -+ tmp++; -+ /* "NULL"-terminate line # */ -+ *tmp = '\0'; -+ /* start of filename */ -+ fn = strchr(tmp + 1, '"') + 1; -+ /* strip trailing " from filename */ -+ tmp = strchr(fn, '"'); -+ *tmp = 0; - /* -1 since #line is the number of the next line */ -- srcpos_set_line(xstrdup(fn.val), atoi(line) - 1); -- data_free(fn); -+ srcpos_set_line(xstrdup(fn), atoi(line) - 1); - } - YY_BREAK - case YY_STATE_EOF(INITIAL): - case YY_STATE_EOF(BYTESTRING): - case YY_STATE_EOF(PROPNODENAME): - case YY_STATE_EOF(V1): --#line 104 "dtc-lexer.l" -+#line 96 "dtc-lexer.l" - { - if (!pop_input_file()) { - yyterminate(); -@@ -993,7 +986,7 @@ case YY_STATE_EOF(V1): - case 3: - /* rule 3 can match eol */ - YY_RULE_SETUP --#line 110 "dtc-lexer.l" -+#line 102 "dtc-lexer.l" - { - DPRINT("String: %s\n", yytext); - yylval.data = data_copy_escape_string(yytext+1, -@@ -1003,7 +996,7 @@ YY_RULE_SETUP - YY_BREAK - case 4: - YY_RULE_SETUP --#line 117 "dtc-lexer.l" -+#line 109 "dtc-lexer.l" - { - DPRINT("Keyword: /dts-v1/\n"); - dts_version = 1; -@@ -1013,25 +1006,33 @@ YY_RULE_SETUP - YY_BREAK - case 5: - YY_RULE_SETUP --#line 124 "dtc-lexer.l" -+#line 116 "dtc-lexer.l" -+{ -+ DPRINT("Keyword: /plugin/\n"); -+ return DT_PLUGIN; -+ } -+ YY_BREAK -+case 6: -+YY_RULE_SETUP -+#line 121 "dtc-lexer.l" - { - DPRINT("Keyword: /memreserve/\n"); - BEGIN_DEFAULT(); - return DT_MEMRESERVE; - } - YY_BREAK --case 6: -+case 7: - YY_RULE_SETUP --#line 130 "dtc-lexer.l" -+#line 127 "dtc-lexer.l" - { - DPRINT("Keyword: /bits/\n"); - BEGIN_DEFAULT(); - return DT_BITS; - } - YY_BREAK --case 7: -+case 8: - YY_RULE_SETUP --#line 136 "dtc-lexer.l" -+#line 133 "dtc-lexer.l" - { - DPRINT("Keyword: /delete-property/\n"); - DPRINT("\n"); -@@ -1039,9 +1040,9 @@ YY_RULE_SETUP - return DT_DEL_PROP; - } - YY_BREAK --case 8: -+case 9: - YY_RULE_SETUP --#line 143 "dtc-lexer.l" -+#line 140 "dtc-lexer.l" - { - DPRINT("Keyword: /delete-node/\n"); - DPRINT("\n"); -@@ -1049,9 +1050,9 @@ YY_RULE_SETUP - return DT_DEL_NODE; - } - YY_BREAK --case 9: -+case 10: - YY_RULE_SETUP --#line 150 "dtc-lexer.l" -+#line 147 "dtc-lexer.l" - { - DPRINT("Label: %s\n", yytext); - yylval.labelref = xstrdup(yytext); -@@ -1059,9 +1060,9 @@ YY_RULE_SETUP - return DT_LABEL; - } - YY_BREAK --case 10: -+case 11: - YY_RULE_SETUP --#line 157 "dtc-lexer.l" -+#line 154 "dtc-lexer.l" - { - char *e; - DPRINT("Integer Literal: '%s'\n", yytext); -@@ -1069,10 +1070,7 @@ YY_RULE_SETUP - errno = 0; - yylval.integer = strtoull(yytext, &e, 0); - -- if (*e && e[strspn(e, "UL")]) { -- lexical_error("Bad integer literal '%s'", -- yytext); -- } -+ assert(!(*e) || !e[strspn(e, "UL")]); - - if (errno == ERANGE) - lexical_error("Integer literal '%s' out of range", -@@ -1084,10 +1082,10 @@ YY_RULE_SETUP - return DT_LITERAL; - } - YY_BREAK --case 11: --/* rule 11 can match eol */ -+case 12: -+/* rule 12 can match eol */ - YY_RULE_SETUP --#line 179 "dtc-lexer.l" -+#line 173 "dtc-lexer.l" - { - struct data d; - DPRINT("Character literal: %s\n", yytext); -@@ -1109,18 +1107,18 @@ YY_RULE_SETUP - return DT_CHAR_LITERAL; - } - YY_BREAK --case 12: -+case 13: - YY_RULE_SETUP --#line 200 "dtc-lexer.l" -+#line 194 "dtc-lexer.l" - { /* label reference */ - DPRINT("Ref: %s\n", yytext+1); - yylval.labelref = xstrdup(yytext+1); - return DT_REF; - } - YY_BREAK --case 13: -+case 14: - YY_RULE_SETUP --#line 206 "dtc-lexer.l" -+#line 200 "dtc-lexer.l" - { /* new-style path reference */ - yytext[yyleng-1] = '\0'; - DPRINT("Ref: %s\n", yytext+2); -@@ -1128,27 +1126,27 @@ YY_RULE_SETUP - return DT_REF; - } - YY_BREAK --case 14: -+case 15: - YY_RULE_SETUP --#line 213 "dtc-lexer.l" -+#line 207 "dtc-lexer.l" - { - yylval.byte = strtol(yytext, NULL, 16); - DPRINT("Byte: %02x\n", (int)yylval.byte); - return DT_BYTE; - } - YY_BREAK --case 15: -+case 16: - YY_RULE_SETUP --#line 219 "dtc-lexer.l" -+#line 213 "dtc-lexer.l" - { - DPRINT("/BYTESTRING\n"); - BEGIN_DEFAULT(); - return ']'; - } - YY_BREAK --case 16: -+case 17: - YY_RULE_SETUP --#line 225 "dtc-lexer.l" -+#line 219 "dtc-lexer.l" - { - DPRINT("PropNodeName: %s\n", yytext); - yylval.propnodename = xstrdup((yytext[0] == '\\') ? -@@ -1157,75 +1155,75 @@ YY_RULE_SETUP - return DT_PROPNODENAME; - } - YY_BREAK --case 17: -+case 18: - YY_RULE_SETUP --#line 233 "dtc-lexer.l" -+#line 227 "dtc-lexer.l" - { - DPRINT("Binary Include\n"); - return DT_INCBIN; - } - YY_BREAK --case 18: --/* rule 18 can match eol */ --YY_RULE_SETUP --#line 238 "dtc-lexer.l" --/* eat whitespace */ -- YY_BREAK - case 19: - /* rule 19 can match eol */ - YY_RULE_SETUP --#line 239 "dtc-lexer.l" --/* eat C-style comments */ -+#line 232 "dtc-lexer.l" -+/* eat whitespace */ - YY_BREAK - case 20: - /* rule 20 can match eol */ - YY_RULE_SETUP --#line 240 "dtc-lexer.l" --/* eat C++-style comments */ -+#line 233 "dtc-lexer.l" -+/* eat C-style comments */ - YY_BREAK - case 21: -+/* rule 21 can match eol */ - YY_RULE_SETUP --#line 242 "dtc-lexer.l" --{ return DT_LSHIFT; }; -+#line 234 "dtc-lexer.l" -+/* eat C++-style comments */ - YY_BREAK - case 22: - YY_RULE_SETUP --#line 243 "dtc-lexer.l" --{ return DT_RSHIFT; }; -+#line 236 "dtc-lexer.l" -+{ return DT_LSHIFT; }; - YY_BREAK - case 23: - YY_RULE_SETUP --#line 244 "dtc-lexer.l" --{ return DT_LE; }; -+#line 237 "dtc-lexer.l" -+{ return DT_RSHIFT; }; - YY_BREAK - case 24: - YY_RULE_SETUP --#line 245 "dtc-lexer.l" --{ return DT_GE; }; -+#line 238 "dtc-lexer.l" -+{ return DT_LE; }; - YY_BREAK - case 25: - YY_RULE_SETUP --#line 246 "dtc-lexer.l" --{ return DT_EQ; }; -+#line 239 "dtc-lexer.l" -+{ return DT_GE; }; - YY_BREAK - case 26: - YY_RULE_SETUP --#line 247 "dtc-lexer.l" --{ return DT_NE; }; -+#line 240 "dtc-lexer.l" -+{ return DT_EQ; }; - YY_BREAK - case 27: - YY_RULE_SETUP --#line 248 "dtc-lexer.l" --{ return DT_AND; }; -+#line 241 "dtc-lexer.l" -+{ return DT_NE; }; - YY_BREAK - case 28: - YY_RULE_SETUP --#line 249 "dtc-lexer.l" --{ return DT_OR; }; -+#line 242 "dtc-lexer.l" -+{ return DT_AND; }; - YY_BREAK - case 29: - YY_RULE_SETUP --#line 251 "dtc-lexer.l" -+#line 243 "dtc-lexer.l" -+{ return DT_OR; }; -+ YY_BREAK -+case 30: -+YY_RULE_SETUP -+#line 245 "dtc-lexer.l" - { - DPRINT("Char: %c (\\x%02x)\n", yytext[0], - (unsigned)yytext[0]); -@@ -1241,12 +1239,12 @@ YY_RULE_SETUP - return yytext[0]; - } - YY_BREAK --case 30: -+case 31: - YY_RULE_SETUP --#line 266 "dtc-lexer.l" -+#line 260 "dtc-lexer.l" - ECHO; - YY_BREAK --#line 1250 "dtc-lexer.lex.c" -+#line 1248 "dtc-lexer.lex.c" - - case YY_END_OF_BUFFER: - { -@@ -1376,7 +1374,6 @@ ECHO; - "fatal flex scanner internal error--no action found" ); - } /* end of action switch */ - } /* end of scanning one token */ -- } /* end of user's declarations */ - } /* end of yylex */ - - /* yy_get_next_buffer - try to read in a new buffer -@@ -1432,21 +1429,21 @@ static int yy_get_next_buffer (void) - - else - { -- yy_size_t num_to_read = -+ int num_to_read = - YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; - - while ( num_to_read <= 0 ) - { /* Not enough room in the buffer - grow it. */ - - /* just a shorter name for the current buffer */ -- YY_BUFFER_STATE b = YY_CURRENT_BUFFER_LVALUE; -+ YY_BUFFER_STATE b = YY_CURRENT_BUFFER; - - int yy_c_buf_p_offset = - (int) ((yy_c_buf_p) - b->yy_ch_buf); - - if ( b->yy_is_our_buffer ) - { -- yy_size_t new_size = b->yy_buf_size * 2; -+ int new_size = b->yy_buf_size * 2; - - if ( new_size <= 0 ) - b->yy_buf_size += b->yy_buf_size / 8; -@@ -1477,7 +1474,7 @@ static int yy_get_next_buffer (void) - - /* Read in more data. */ - YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), -- (yy_n_chars), num_to_read ); -+ (yy_n_chars), (size_t) num_to_read ); - - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } -@@ -1539,7 +1536,7 @@ static int yy_get_next_buffer (void) - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; -- if ( yy_current_state >= 159 ) -+ if ( yy_current_state >= 166 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; -@@ -1567,13 +1564,13 @@ static int yy_get_next_buffer (void) - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; -- if ( yy_current_state >= 159 ) -+ if ( yy_current_state >= 166 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; -- yy_is_jam = (yy_current_state == 158); -+ yy_is_jam = (yy_current_state == 165); - -- return yy_is_jam ? 0 : yy_current_state; -+ return yy_is_jam ? 0 : yy_current_state; - } - - #ifndef YY_NO_INPUT -@@ -1600,7 +1597,7 @@ static int yy_get_next_buffer (void) - - else - { /* need more input */ -- yy_size_t offset = (yy_c_buf_p) - (yytext_ptr); -+ int offset = (yy_c_buf_p) - (yytext_ptr); - ++(yy_c_buf_p); - - switch ( yy_get_next_buffer( ) ) -@@ -1874,7 +1871,7 @@ void yypop_buffer_state (void) - */ - static void yyensure_buffer_stack (void) - { -- yy_size_t num_to_alloc; -+ int num_to_alloc; - - if (!(yy_buffer_stack)) { - -@@ -1971,12 +1968,12 @@ YY_BUFFER_STATE yy_scan_string (yyconst - * - * @return the newly allocated buffer state object. - */ --YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len ) -+YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len ) - { - YY_BUFFER_STATE b; - char *buf; - yy_size_t n; -- yy_size_t i; -+ int i; - - /* Get memory for full buffer, including space for trailing EOB's. */ - n = _yybytes_len + 2; -@@ -2058,7 +2055,7 @@ FILE *yyget_out (void) - /** Get the length of the current token. - * - */ --yy_size_t yyget_leng (void) -+int yyget_leng (void) - { - return yyleng; - } -@@ -2206,7 +2203,7 @@ void yyfree (void * ptr ) - - #define YYTABLES_NAME "yytables" - --#line 265 "dtc-lexer.l" -+#line 260 "dtc-lexer.l" - - - ---- a/scripts/dtc/dtc-parser.tab.c_shipped -+++ b/scripts/dtc/dtc-parser.tab.c_shipped -@@ -65,6 +65,7 @@ - #line 20 "dtc-parser.y" /* yacc.c:339 */ - - #include -+#include - - #include "dtc.h" - #include "srcpos.h" -@@ -80,7 +81,7 @@ extern void yyerror(char const *s); - extern struct boot_info *the_boot_info; - extern bool treesource_error; - --#line 84 "dtc-parser.tab.c" /* yacc.c:339 */ -+#line 85 "dtc-parser.tab.c" /* yacc.c:339 */ - - # ifndef YY_NULLPTR - # if defined __cplusplus && 201103L <= __cplusplus -@@ -116,26 +117,27 @@ extern int yydebug; - enum yytokentype - { - DT_V1 = 258, -- DT_MEMRESERVE = 259, -- DT_LSHIFT = 260, -- DT_RSHIFT = 261, -- DT_LE = 262, -- DT_GE = 263, -- DT_EQ = 264, -- DT_NE = 265, -- DT_AND = 266, -- DT_OR = 267, -- DT_BITS = 268, -- DT_DEL_PROP = 269, -- DT_DEL_NODE = 270, -- DT_PROPNODENAME = 271, -- DT_LITERAL = 272, -- DT_CHAR_LITERAL = 273, -- DT_BYTE = 274, -- DT_STRING = 275, -- DT_LABEL = 276, -- DT_REF = 277, -- DT_INCBIN = 278 -+ DT_PLUGIN = 259, -+ DT_MEMRESERVE = 260, -+ DT_LSHIFT = 261, -+ DT_RSHIFT = 262, -+ DT_LE = 263, -+ DT_GE = 264, -+ DT_EQ = 265, -+ DT_NE = 266, -+ DT_AND = 267, -+ DT_OR = 268, -+ DT_BITS = 269, -+ DT_DEL_PROP = 270, -+ DT_DEL_NODE = 271, -+ DT_PROPNODENAME = 272, -+ DT_LITERAL = 273, -+ DT_CHAR_LITERAL = 274, -+ DT_BYTE = 275, -+ DT_STRING = 276, -+ DT_LABEL = 277, -+ DT_REF = 278, -+ DT_INCBIN = 279 - }; - #endif - -@@ -144,7 +146,7 @@ extern int yydebug; - typedef union YYSTYPE YYSTYPE; - union YYSTYPE - { --#line 38 "dtc-parser.y" /* yacc.c:355 */ -+#line 39 "dtc-parser.y" /* yacc.c:355 */ - - char *propnodename; - char *labelref; -@@ -162,8 +164,9 @@ union YYSTYPE - struct node *nodelist; - struct reserve_info *re; - uint64_t integer; -+ bool is_plugin; - --#line 167 "dtc-parser.tab.c" /* yacc.c:355 */ -+#line 170 "dtc-parser.tab.c" /* yacc.c:355 */ - }; - # define YYSTYPE_IS_TRIVIAL 1 - # define YYSTYPE_IS_DECLARED 1 -@@ -192,7 +195,7 @@ int yyparse (void); - - /* Copy the second part of user declarations. */ - --#line 196 "dtc-parser.tab.c" /* yacc.c:358 */ -+#line 199 "dtc-parser.tab.c" /* yacc.c:358 */ - - #ifdef short - # undef short -@@ -439,18 +442,18 @@ union yyalloc - #define YYLAST 136 - - /* YYNTOKENS -- Number of terminals. */ --#define YYNTOKENS 47 -+#define YYNTOKENS 48 - /* YYNNTS -- Number of nonterminals. */ --#define YYNNTS 28 -+#define YYNNTS 29 - /* YYNRULES -- Number of rules. */ --#define YYNRULES 80 -+#define YYNRULES 82 - /* YYNSTATES -- Number of states. */ --#define YYNSTATES 144 -+#define YYNSTATES 147 - - /* YYTRANSLATE[YYX] -- Symbol number corresponding to YYX as returned - by yylex, with out-of-bounds checking. */ - #define YYUNDEFTOK 2 --#define YYMAXUTOK 278 -+#define YYMAXUTOK 279 - - #define YYTRANSLATE(YYX) \ - ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) -@@ -462,16 +465,16 @@ static const yytype_uint8 yytranslate[] - 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, -- 2, 2, 2, 46, 2, 2, 2, 44, 40, 2, -- 32, 34, 43, 41, 33, 42, 2, 25, 2, 2, -- 2, 2, 2, 2, 2, 2, 2, 2, 37, 24, -- 35, 28, 29, 36, 2, 2, 2, 2, 2, 2, -+ 2, 2, 2, 47, 2, 2, 2, 45, 41, 2, -+ 33, 35, 44, 42, 34, 43, 2, 26, 2, 2, -+ 2, 2, 2, 2, 2, 2, 2, 2, 38, 25, -+ 36, 29, 30, 37, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, -- 2, 30, 2, 31, 39, 2, 2, 2, 2, 2, -+ 2, 31, 2, 32, 40, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, -- 2, 2, 2, 26, 38, 27, 45, 2, 2, 2, -+ 2, 2, 2, 27, 39, 28, 46, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, -@@ -486,22 +489,22 @@ static const yytype_uint8 yytranslate[] - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, - 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, -- 15, 16, 17, 18, 19, 20, 21, 22, 23 -+ 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 - }; - - #if YYDEBUG - /* YYRLINE[YYN] -- Source line where rule number YYN was defined. */ - static const yytype_uint16 yyrline[] = - { -- 0, 104, 104, 113, 116, 123, 127, 135, 139, 144, -- 155, 165, 180, 188, 191, 198, 202, 206, 210, 218, -- 222, 226, 230, 234, 250, 260, 268, 271, 275, 282, -- 298, 303, 322, 336, 343, 344, 345, 352, 356, 357, -- 361, 362, 366, 367, 371, 372, 376, 377, 381, 382, -- 386, 387, 388, 392, 393, 394, 395, 396, 400, 401, -- 402, 406, 407, 408, 412, 413, 422, 431, 435, 436, -- 437, 438, 443, 446, 450, 458, 461, 465, 473, 477, -- 481 -+ 0, 108, 108, 118, 121, 129, 132, 139, 143, 151, -+ 155, 160, 171, 181, 196, 204, 207, 214, 218, 222, -+ 226, 234, 238, 242, 246, 250, 266, 276, 284, 287, -+ 291, 298, 314, 319, 338, 352, 359, 360, 361, 368, -+ 372, 373, 377, 378, 382, 383, 387, 388, 392, 393, -+ 397, 398, 402, 403, 404, 408, 409, 410, 411, 412, -+ 416, 417, 418, 422, 423, 424, 428, 429, 430, 431, -+ 435, 436, 437, 438, 443, 446, 450, 458, 461, 465, -+ 473, 477, 481 - }; - #endif - -@@ -510,19 +513,19 @@ static const yytype_uint16 yyrline[] = - First, the terminals, then, starting at YYNTOKENS, nonterminals. */ - static const char *const yytname[] = - { -- "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE", "DT_LSHIFT", -- "DT_RSHIFT", "DT_LE", "DT_GE", "DT_EQ", "DT_NE", "DT_AND", "DT_OR", -- "DT_BITS", "DT_DEL_PROP", "DT_DEL_NODE", "DT_PROPNODENAME", "DT_LITERAL", -- "DT_CHAR_LITERAL", "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", -- "DT_INCBIN", "';'", "'/'", "'{'", "'}'", "'='", "'>'", "'['", "']'", -- "'('", "','", "')'", "'<'", "'?'", "':'", "'|'", "'^'", "'&'", "'+'", -- "'-'", "'*'", "'%'", "'~'", "'!'", "$accept", "sourcefile", -- "memreserves", "memreserve", "devicetree", "nodedef", "proplist", -- "propdef", "propdata", "propdataprefix", "arrayprefix", "integer_prim", -- "integer_expr", "integer_trinary", "integer_or", "integer_and", -- "integer_bitor", "integer_bitxor", "integer_bitand", "integer_eq", -- "integer_rela", "integer_shift", "integer_add", "integer_mul", -- "integer_unary", "bytestring", "subnodes", "subnode", YY_NULLPTR -+ "$end", "error", "$undefined", "DT_V1", "DT_PLUGIN", "DT_MEMRESERVE", -+ "DT_LSHIFT", "DT_RSHIFT", "DT_LE", "DT_GE", "DT_EQ", "DT_NE", "DT_AND", -+ "DT_OR", "DT_BITS", "DT_DEL_PROP", "DT_DEL_NODE", "DT_PROPNODENAME", -+ "DT_LITERAL", "DT_CHAR_LITERAL", "DT_BYTE", "DT_STRING", "DT_LABEL", -+ "DT_REF", "DT_INCBIN", "';'", "'/'", "'{'", "'}'", "'='", "'>'", "'['", -+ "']'", "'('", "','", "')'", "'<'", "'?'", "':'", "'|'", "'^'", "'&'", -+ "'+'", "'-'", "'*'", "'%'", "'~'", "'!'", "$accept", "sourcefile", -+ "plugindecl", "memreserves", "memreserve", "devicetree", "nodedef", -+ "proplist", "propdef", "propdata", "propdataprefix", "arrayprefix", -+ "integer_prim", "integer_expr", "integer_trinary", "integer_or", -+ "integer_and", "integer_bitor", "integer_bitxor", "integer_bitand", -+ "integer_eq", "integer_rela", "integer_shift", "integer_add", -+ "integer_mul", "integer_unary", "bytestring", "subnodes", "subnode", YY_NULLPTR - }; - #endif - -@@ -533,16 +536,16 @@ static const yytype_uint16 yytoknum[] = - { - 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, - 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, -- 275, 276, 277, 278, 59, 47, 123, 125, 61, 62, -- 91, 93, 40, 44, 41, 60, 63, 58, 124, 94, -- 38, 43, 45, 42, 37, 126, 33 -+ 275, 276, 277, 278, 279, 59, 47, 123, 125, 61, -+ 62, 91, 93, 40, 44, 41, 60, 63, 58, 124, -+ 94, 38, 43, 45, 42, 37, 126, 33 - }; - # endif - --#define YYPACT_NINF -81 -+#define YYPACT_NINF -84 - - #define yypact_value_is_default(Yystate) \ -- (!!((Yystate) == (-81))) -+ (!!((Yystate) == (-84))) - - #define YYTABLE_NINF -1 - -@@ -553,21 +556,21 @@ static const yytype_uint16 yytoknum[] = - STATE-NUM. */ - static const yytype_int8 yypact[] = - { -- 16, -11, 21, 10, -81, 25, 10, 19, 10, -81, -- -81, -9, 25, -81, 2, 51, -81, -9, -9, -9, -- -81, 1, -81, -6, 50, 14, 28, 29, 36, 3, -- 58, 44, -3, -81, 47, -81, -81, 65, 68, 2, -- 2, -81, -81, -81, -81, -9, -9, -9, -9, -9, -- -9, -9, -9, -9, -9, -9, -9, -9, -9, -9, -- -9, -9, -9, -9, -81, 63, 69, 2, -81, -81, -- 50, 57, 14, 28, 29, 36, 3, 3, 58, 58, -- 58, 58, 44, 44, -3, -3, -81, -81, -81, 79, -- 80, -8, 63, -81, 72, 63, -81, -81, -9, 76, -- 77, -81, -81, -81, -81, -81, 78, -81, -81, -81, -- -81, -81, 35, 4, -81, -81, -81, -81, 86, -81, -- -81, -81, 73, -81, -81, 33, 71, 84, 39, -81, -- -81, -81, -81, -81, 41, -81, -81, -81, 25, -81, -- 74, 25, 75, -81 -+ 15, -12, 35, 42, -84, 27, 9, -84, 24, 9, -+ 43, 9, -84, -84, -10, 24, -84, 60, 44, -84, -+ -10, -10, -10, -84, 55, -84, -7, 52, 53, 51, -+ 54, 10, 2, 38, 37, -4, -84, 68, -84, -84, -+ 71, 73, 60, 60, -84, -84, -84, -84, -10, -10, -+ -10, -10, -10, -10, -10, -10, -10, -10, -10, -10, -+ -10, -10, -10, -10, -10, -10, -10, -84, 56, 72, -+ 60, -84, -84, 52, 61, 53, 51, 54, 10, 2, -+ 2, 38, 38, 38, 38, 37, 37, -4, -4, -84, -+ -84, -84, 81, 83, 34, 56, -84, 74, 56, -84, -+ -84, -10, 76, 78, -84, -84, -84, -84, -84, 79, -+ -84, -84, -84, -84, -84, -6, 3, -84, -84, -84, -+ -84, 87, -84, -84, -84, 75, -84, -84, 32, 70, -+ 86, 36, -84, -84, -84, -84, -84, 47, -84, -84, -+ -84, 24, -84, 77, 24, 80, -84 - }; - - /* YYDEFACT[STATE-NUM] -- Default reduction number in state STATE-NUM. -@@ -575,37 +578,37 @@ static const yytype_int8 yypact[] = - means the default is an error. */ - static const yytype_uint8 yydefact[] = - { -- 0, 0, 0, 3, 1, 0, 0, 0, 3, 34, -- 35, 0, 0, 6, 0, 2, 4, 0, 0, 0, -- 68, 0, 37, 38, 40, 42, 44, 46, 48, 50, -- 53, 60, 63, 67, 0, 13, 7, 0, 0, 0, -- 0, 69, 70, 71, 36, 0, 0, 0, 0, 0, -+ 0, 0, 0, 3, 1, 0, 5, 4, 0, 0, -+ 0, 5, 36, 37, 0, 0, 8, 0, 2, 6, -+ 0, 0, 0, 70, 0, 39, 40, 42, 44, 46, -+ 48, 50, 52, 55, 62, 65, 69, 0, 15, 9, -+ 0, 0, 0, 0, 71, 72, 73, 38, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -- 0, 0, 0, 0, 5, 75, 0, 0, 10, 8, -- 41, 0, 43, 45, 47, 49, 51, 52, 56, 57, -- 55, 54, 58, 59, 61, 62, 65, 64, 66, 0, -- 0, 0, 0, 14, 0, 75, 11, 9, 0, 0, -- 0, 16, 26, 78, 18, 80, 0, 77, 76, 39, -- 17, 79, 0, 0, 12, 25, 15, 27, 0, 19, -- 28, 22, 0, 72, 30, 0, 0, 0, 0, 33, -- 32, 20, 31, 29, 0, 73, 74, 21, 0, 24, -- 0, 0, 0, 23 -+ 0, 0, 0, 0, 0, 0, 0, 7, 77, 0, -+ 0, 12, 10, 43, 0, 45, 47, 49, 51, 53, -+ 54, 58, 59, 57, 56, 60, 61, 63, 64, 67, -+ 66, 68, 0, 0, 0, 0, 16, 0, 77, 13, -+ 11, 0, 0, 0, 18, 28, 80, 20, 82, 0, -+ 79, 78, 41, 19, 81, 0, 0, 14, 27, 17, -+ 29, 0, 21, 30, 24, 0, 74, 32, 0, 0, -+ 0, 0, 35, 34, 22, 33, 31, 0, 75, 76, -+ 23, 0, 26, 0, 0, 0, 25 - }; - - /* YYPGOTO[NTERM-NUM]. */ - static const yytype_int8 yypgoto[] = - { -- -81, -81, 100, 104, -81, -38, -81, -80, -81, -81, -- -81, -5, 66, 13, -81, 70, 67, 81, 64, 82, -- 37, 27, 34, 38, -14, -81, 22, 24 -+ -84, -84, -84, 98, 101, -84, -41, -84, -83, -84, -+ -84, -84, -8, 63, 12, -84, 66, 67, 65, 69, -+ 82, 29, 18, 25, 26, -17, -84, 20, 28 - }; - - /* YYDEFGOTO[NTERM-NUM]. */ - static const yytype_int16 yydefgoto[] = - { -- -1, 2, 7, 8, 15, 36, 65, 93, 112, 113, -- 125, 20, 21, 22, 23, 24, 25, 26, 27, 28, -- 29, 30, 31, 32, 33, 128, 94, 95 -+ -1, 2, 6, 10, 11, 18, 39, 68, 96, 115, -+ 116, 128, 23, 24, 25, 26, 27, 28, 29, 30, -+ 31, 32, 33, 34, 35, 36, 131, 97, 98 - }; - - /* YYTABLE[YYPACT[STATE-NUM]] -- What to do in state STATE-NUM. If -@@ -613,87 +616,87 @@ static const yytype_int16 yydefgoto[] = - number is the opposite. If YYTABLE_NINF, syntax error. */ - static const yytype_uint8 yytable[] = - { -- 12, 68, 69, 41, 42, 43, 45, 34, 9, 10, -- 53, 54, 104, 3, 5, 107, 101, 118, 35, 1, -- 102, 4, 61, 11, 119, 120, 121, 122, 35, 97, -- 46, 6, 55, 17, 123, 44, 18, 19, 56, 124, -- 62, 63, 9, 10, 14, 51, 52, 86, 87, 88, -- 9, 10, 48, 103, 129, 130, 115, 11, 135, 116, -- 136, 47, 131, 57, 58, 11, 37, 49, 117, 50, -- 137, 64, 38, 39, 138, 139, 40, 89, 90, 91, -- 78, 79, 80, 81, 92, 59, 60, 66, 76, 77, -- 67, 82, 83, 96, 98, 99, 100, 84, 85, 106, -- 110, 111, 114, 126, 134, 127, 133, 141, 16, 143, -- 13, 109, 71, 74, 72, 70, 105, 108, 0, 0, -- 132, 0, 0, 0, 0, 0, 0, 0, 0, 73, -- 0, 0, 75, 140, 0, 0, 142 -+ 15, 71, 72, 44, 45, 46, 48, 37, 12, 13, -+ 56, 57, 107, 3, 8, 110, 118, 121, 1, 119, -+ 54, 55, 64, 14, 122, 123, 124, 125, 120, 100, -+ 49, 9, 58, 20, 126, 4, 21, 22, 59, 127, -+ 65, 66, 12, 13, 60, 61, 5, 89, 90, 91, -+ 12, 13, 7, 106, 132, 133, 138, 14, 139, 104, -+ 40, 38, 134, 105, 50, 14, 41, 42, 140, 17, -+ 43, 92, 93, 94, 81, 82, 83, 84, 95, 62, -+ 63, 141, 142, 79, 80, 85, 86, 38, 87, 88, -+ 47, 52, 51, 67, 69, 53, 70, 99, 102, 101, -+ 103, 113, 109, 114, 117, 129, 136, 137, 130, 19, -+ 16, 144, 74, 112, 73, 146, 76, 75, 111, 0, -+ 135, 77, 0, 108, 0, 0, 0, 0, 0, 0, -+ 0, 0, 0, 143, 0, 78, 145 - }; - - static const yytype_int16 yycheck[] = - { -- 5, 39, 40, 17, 18, 19, 12, 12, 17, 18, -- 7, 8, 92, 24, 4, 95, 24, 13, 26, 3, -- 28, 0, 25, 32, 20, 21, 22, 23, 26, 67, -- 36, 21, 29, 42, 30, 34, 45, 46, 35, 35, -- 43, 44, 17, 18, 25, 9, 10, 61, 62, 63, -- 17, 18, 38, 91, 21, 22, 21, 32, 19, 24, -- 21, 11, 29, 5, 6, 32, 15, 39, 33, 40, -- 31, 24, 21, 22, 33, 34, 25, 14, 15, 16, -- 53, 54, 55, 56, 21, 41, 42, 22, 51, 52, -- 22, 57, 58, 24, 37, 16, 16, 59, 60, 27, -- 24, 24, 24, 17, 20, 32, 35, 33, 8, 34, -- 6, 98, 46, 49, 47, 45, 92, 95, -1, -1, -- 125, -1, -1, -1, -1, -1, -1, -1, -1, 48, -- -1, -1, 50, 138, -1, -1, 141 -+ 8, 42, 43, 20, 21, 22, 13, 15, 18, 19, -+ 8, 9, 95, 25, 5, 98, 22, 14, 3, 25, -+ 10, 11, 26, 33, 21, 22, 23, 24, 34, 70, -+ 37, 22, 30, 43, 31, 0, 46, 47, 36, 36, -+ 44, 45, 18, 19, 6, 7, 4, 64, 65, 66, -+ 18, 19, 25, 94, 22, 23, 20, 33, 22, 25, -+ 16, 27, 30, 29, 12, 33, 22, 23, 32, 26, -+ 26, 15, 16, 17, 56, 57, 58, 59, 22, 42, -+ 43, 34, 35, 54, 55, 60, 61, 27, 62, 63, -+ 35, 40, 39, 25, 23, 41, 23, 25, 17, 38, -+ 17, 25, 28, 25, 25, 18, 36, 21, 33, 11, -+ 9, 34, 49, 101, 48, 35, 51, 50, 98, -1, -+ 128, 52, -1, 95, -1, -1, -1, -1, -1, -1, -+ -1, -1, -1, 141, -1, 53, 144 - }; - - /* YYSTOS[STATE-NUM] -- The (internal number of the) accessing - symbol of state STATE-NUM. */ - static const yytype_uint8 yystos[] = - { -- 0, 3, 48, 24, 0, 4, 21, 49, 50, 17, -- 18, 32, 58, 50, 25, 51, 49, 42, 45, 46, -- 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, -- 68, 69, 70, 71, 58, 26, 52, 15, 21, 22, -- 25, 71, 71, 71, 34, 12, 36, 11, 38, 39, -- 40, 9, 10, 7, 8, 29, 35, 5, 6, 41, -- 42, 25, 43, 44, 24, 53, 22, 22, 52, 52, -- 62, 59, 63, 64, 65, 66, 67, 67, 68, 68, -- 68, 68, 69, 69, 70, 70, 71, 71, 71, 14, -- 15, 16, 21, 54, 73, 74, 24, 52, 37, 16, -- 16, 24, 28, 52, 54, 74, 27, 54, 73, 60, -- 24, 24, 55, 56, 24, 21, 24, 33, 13, 20, -- 21, 22, 23, 30, 35, 57, 17, 32, 72, 21, -- 22, 29, 58, 35, 20, 19, 21, 31, 33, 34, -- 58, 33, 58, 34 -+ 0, 3, 49, 25, 0, 4, 50, 25, 5, 22, -+ 51, 52, 18, 19, 33, 60, 52, 26, 53, 51, -+ 43, 46, 47, 60, 61, 62, 63, 64, 65, 66, -+ 67, 68, 69, 70, 71, 72, 73, 60, 27, 54, -+ 16, 22, 23, 26, 73, 73, 73, 35, 13, 37, -+ 12, 39, 40, 41, 10, 11, 8, 9, 30, 36, -+ 6, 7, 42, 43, 26, 44, 45, 25, 55, 23, -+ 23, 54, 54, 64, 61, 65, 66, 67, 68, 69, -+ 69, 70, 70, 70, 70, 71, 71, 72, 72, 73, -+ 73, 73, 15, 16, 17, 22, 56, 75, 76, 25, -+ 54, 38, 17, 17, 25, 29, 54, 56, 76, 28, -+ 56, 75, 62, 25, 25, 57, 58, 25, 22, 25, -+ 34, 14, 21, 22, 23, 24, 31, 36, 59, 18, -+ 33, 74, 22, 23, 30, 60, 36, 21, 20, 22, -+ 32, 34, 35, 60, 34, 60, 35 - }; - - /* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ - static const yytype_uint8 yyr1[] = - { -- 0, 47, 48, 49, 49, 50, 50, 51, 51, 51, -- 51, 51, 52, 53, 53, 54, 54, 54, 54, 55, -- 55, 55, 55, 55, 55, 55, 56, 56, 56, 57, -- 57, 57, 57, 57, 58, 58, 58, 59, 60, 60, -- 61, 61, 62, 62, 63, 63, 64, 64, 65, 65, -- 66, 66, 66, 67, 67, 67, 67, 67, 68, 68, -- 68, 69, 69, 69, 70, 70, 70, 70, 71, 71, -- 71, 71, 72, 72, 72, 73, 73, 73, 74, 74, -- 74 -+ 0, 48, 49, 50, 50, 51, 51, 52, 52, 53, -+ 53, 53, 53, 53, 54, 55, 55, 56, 56, 56, -+ 56, 57, 57, 57, 57, 57, 57, 57, 58, 58, -+ 58, 59, 59, 59, 59, 59, 60, 60, 60, 61, -+ 62, 62, 63, 63, 64, 64, 65, 65, 66, 66, -+ 67, 67, 68, 68, 68, 69, 69, 69, 69, 69, -+ 70, 70, 70, 71, 71, 71, 72, 72, 72, 72, -+ 73, 73, 73, 73, 74, 74, 74, 75, 75, 75, -+ 76, 76, 76 - }; - - /* YYR2[YYN] -- Number of symbols on the right hand side of rule YYN. */ - static const yytype_uint8 yyr2[] = - { -- 0, 2, 4, 0, 2, 4, 2, 2, 3, 4, -- 3, 4, 5, 0, 2, 4, 2, 3, 2, 2, -- 3, 4, 2, 9, 5, 2, 0, 2, 2, 3, -- 1, 2, 2, 2, 1, 1, 3, 1, 1, 5, -- 1, 3, 1, 3, 1, 3, 1, 3, 1, 3, -- 1, 3, 3, 1, 3, 3, 3, 3, 3, 3, -- 1, 3, 3, 1, 3, 3, 3, 1, 1, 2, -- 2, 2, 0, 2, 2, 0, 2, 2, 2, 3, -- 2 -+ 0, 2, 5, 0, 2, 0, 2, 4, 2, 2, -+ 3, 4, 3, 4, 5, 0, 2, 4, 2, 3, -+ 2, 2, 3, 4, 2, 9, 5, 2, 0, 2, -+ 2, 3, 1, 2, 2, 2, 1, 1, 3, 1, -+ 1, 5, 1, 3, 1, 3, 1, 3, 1, 3, -+ 1, 3, 1, 3, 3, 1, 3, 3, 3, 3, -+ 3, 3, 1, 3, 3, 1, 3, 3, 3, 1, -+ 1, 2, 2, 2, 0, 2, 2, 0, 2, 2, -+ 2, 3, 2 - }; - - -@@ -1463,65 +1466,82 @@ yyreduce: - switch (yyn) - { - case 2: --#line 105 "dtc-parser.y" /* yacc.c:1646 */ -+#line 109 "dtc-parser.y" /* yacc.c:1646 */ - { -+ (yyvsp[0].node)->is_plugin = (yyvsp[-2].is_plugin); - the_boot_info = build_boot_info((yyvsp[-1].re), (yyvsp[0].node), - guess_boot_cpuid((yyvsp[0].node))); - } --#line 1472 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1476 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - - case 3: --#line 113 "dtc-parser.y" /* yacc.c:1646 */ -+#line 118 "dtc-parser.y" /* yacc.c:1646 */ - { -- (yyval.re) = NULL; -+ (yyval.is_plugin) = false; - } --#line 1480 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1484 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - - case 4: --#line 117 "dtc-parser.y" /* yacc.c:1646 */ -+#line 122 "dtc-parser.y" /* yacc.c:1646 */ - { -- (yyval.re) = chain_reserve_entry((yyvsp[-1].re), (yyvsp[0].re)); -+ (yyval.is_plugin) = true; - } --#line 1488 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1492 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - - case 5: --#line 124 "dtc-parser.y" /* yacc.c:1646 */ -+#line 129 "dtc-parser.y" /* yacc.c:1646 */ - { -- (yyval.re) = build_reserve_entry((yyvsp[-2].integer), (yyvsp[-1].integer)); -+ (yyval.re) = NULL; - } --#line 1496 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1500 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - - case 6: --#line 128 "dtc-parser.y" /* yacc.c:1646 */ -+#line 133 "dtc-parser.y" /* yacc.c:1646 */ -+ { -+ (yyval.re) = chain_reserve_entry((yyvsp[-1].re), (yyvsp[0].re)); -+ } -+#line 1508 "dtc-parser.tab.c" /* yacc.c:1646 */ -+ break; -+ -+ case 7: -+#line 140 "dtc-parser.y" /* yacc.c:1646 */ -+ { -+ (yyval.re) = build_reserve_entry((yyvsp[-2].integer), (yyvsp[-1].integer)); -+ } -+#line 1516 "dtc-parser.tab.c" /* yacc.c:1646 */ -+ break; -+ -+ case 8: -+#line 144 "dtc-parser.y" /* yacc.c:1646 */ - { - add_label(&(yyvsp[0].re)->labels, (yyvsp[-1].labelref)); - (yyval.re) = (yyvsp[0].re); - } --#line 1505 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1525 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 7: --#line 136 "dtc-parser.y" /* yacc.c:1646 */ -+ case 9: -+#line 152 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.node) = name_node((yyvsp[0].node), ""); - } --#line 1513 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1533 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 8: --#line 140 "dtc-parser.y" /* yacc.c:1646 */ -+ case 10: -+#line 156 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.node) = merge_nodes((yyvsp[-2].node), (yyvsp[0].node)); - } --#line 1521 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1541 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 9: --#line 145 "dtc-parser.y" /* yacc.c:1646 */ -+ case 11: -+#line 161 "dtc-parser.y" /* yacc.c:1646 */ - { - struct node *target = get_node_by_ref((yyvsp[-3].node), (yyvsp[-1].labelref)); - -@@ -1532,11 +1552,11 @@ yyreduce: - ERROR(&(yylsp[-1]), "Label or path %s not found", (yyvsp[-1].labelref)); - (yyval.node) = (yyvsp[-3].node); - } --#line 1536 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1556 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 10: --#line 156 "dtc-parser.y" /* yacc.c:1646 */ -+ case 12: -+#line 172 "dtc-parser.y" /* yacc.c:1646 */ - { - struct node *target = get_node_by_ref((yyvsp[-2].node), (yyvsp[-1].labelref)); - -@@ -1546,11 +1566,11 @@ yyreduce: - ERROR(&(yylsp[-1]), "Label or path %s not found", (yyvsp[-1].labelref)); - (yyval.node) = (yyvsp[-2].node); - } --#line 1550 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1570 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 11: --#line 166 "dtc-parser.y" /* yacc.c:1646 */ -+ case 13: -+#line 182 "dtc-parser.y" /* yacc.c:1646 */ - { - struct node *target = get_node_by_ref((yyvsp[-3].node), (yyvsp[-1].labelref)); - -@@ -1562,100 +1582,100 @@ yyreduce: - - (yyval.node) = (yyvsp[-3].node); - } --#line 1566 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1586 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 12: --#line 181 "dtc-parser.y" /* yacc.c:1646 */ -+ case 14: -+#line 197 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.node) = build_node((yyvsp[-3].proplist), (yyvsp[-2].nodelist)); - } --#line 1574 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1594 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 13: --#line 188 "dtc-parser.y" /* yacc.c:1646 */ -+ case 15: -+#line 204 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.proplist) = NULL; - } --#line 1582 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1602 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 14: --#line 192 "dtc-parser.y" /* yacc.c:1646 */ -+ case 16: -+#line 208 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.proplist) = chain_property((yyvsp[0].prop), (yyvsp[-1].proplist)); - } --#line 1590 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1610 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 15: --#line 199 "dtc-parser.y" /* yacc.c:1646 */ -+ case 17: -+#line 215 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.prop) = build_property((yyvsp[-3].propnodename), (yyvsp[-1].data)); - } --#line 1598 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1618 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 16: --#line 203 "dtc-parser.y" /* yacc.c:1646 */ -+ case 18: -+#line 219 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.prop) = build_property((yyvsp[-1].propnodename), empty_data); - } --#line 1606 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1626 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 17: --#line 207 "dtc-parser.y" /* yacc.c:1646 */ -+ case 19: -+#line 223 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.prop) = build_property_delete((yyvsp[-1].propnodename)); - } --#line 1614 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1634 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 18: --#line 211 "dtc-parser.y" /* yacc.c:1646 */ -+ case 20: -+#line 227 "dtc-parser.y" /* yacc.c:1646 */ - { - add_label(&(yyvsp[0].prop)->labels, (yyvsp[-1].labelref)); - (yyval.prop) = (yyvsp[0].prop); - } --#line 1623 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1643 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 19: --#line 219 "dtc-parser.y" /* yacc.c:1646 */ -+ case 21: -+#line 235 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.data) = data_merge((yyvsp[-1].data), (yyvsp[0].data)); - } --#line 1631 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1651 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 20: --#line 223 "dtc-parser.y" /* yacc.c:1646 */ -+ case 22: -+#line 239 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.data) = data_merge((yyvsp[-2].data), (yyvsp[-1].array).data); - } --#line 1639 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1659 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 21: --#line 227 "dtc-parser.y" /* yacc.c:1646 */ -+ case 23: -+#line 243 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.data) = data_merge((yyvsp[-3].data), (yyvsp[-1].data)); - } --#line 1647 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1667 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 22: --#line 231 "dtc-parser.y" /* yacc.c:1646 */ -+ case 24: -+#line 247 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.data) = data_add_marker((yyvsp[-1].data), REF_PATH, (yyvsp[0].labelref)); - } --#line 1655 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1675 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 23: --#line 235 "dtc-parser.y" /* yacc.c:1646 */ -+ case 25: -+#line 251 "dtc-parser.y" /* yacc.c:1646 */ - { - FILE *f = srcfile_relative_open((yyvsp[-5].data).val, NULL); - struct data d; -@@ -1671,11 +1691,11 @@ yyreduce: - (yyval.data) = data_merge((yyvsp[-8].data), d); - fclose(f); - } --#line 1675 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1695 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 24: --#line 251 "dtc-parser.y" /* yacc.c:1646 */ -+ case 26: -+#line 267 "dtc-parser.y" /* yacc.c:1646 */ - { - FILE *f = srcfile_relative_open((yyvsp[-1].data).val, NULL); - struct data d = empty_data; -@@ -1685,43 +1705,43 @@ yyreduce: - (yyval.data) = data_merge((yyvsp[-4].data), d); - fclose(f); - } --#line 1689 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1709 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 25: --#line 261 "dtc-parser.y" /* yacc.c:1646 */ -+ case 27: -+#line 277 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref)); - } --#line 1697 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1717 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 26: --#line 268 "dtc-parser.y" /* yacc.c:1646 */ -+ case 28: -+#line 284 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.data) = empty_data; - } --#line 1705 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1725 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 27: --#line 272 "dtc-parser.y" /* yacc.c:1646 */ -+ case 29: -+#line 288 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.data) = (yyvsp[-1].data); - } --#line 1713 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1733 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 28: --#line 276 "dtc-parser.y" /* yacc.c:1646 */ -+ case 30: -+#line 292 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref)); - } --#line 1721 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1741 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 29: --#line 283 "dtc-parser.y" /* yacc.c:1646 */ -+ case 31: -+#line 299 "dtc-parser.y" /* yacc.c:1646 */ - { - unsigned long long bits; - -@@ -1737,20 +1757,20 @@ yyreduce: - (yyval.array).data = empty_data; - (yyval.array).bits = bits; - } --#line 1741 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1761 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 30: --#line 299 "dtc-parser.y" /* yacc.c:1646 */ -+ case 32: -+#line 315 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.array).data = empty_data; - (yyval.array).bits = 32; - } --#line 1750 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1770 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 31: --#line 304 "dtc-parser.y" /* yacc.c:1646 */ -+ case 33: -+#line 320 "dtc-parser.y" /* yacc.c:1646 */ - { - if ((yyvsp[-1].array).bits < 64) { - uint64_t mask = (1ULL << (yyvsp[-1].array).bits) - 1; -@@ -1769,11 +1789,11 @@ yyreduce: - - (yyval.array).data = data_append_integer((yyvsp[-1].array).data, (yyvsp[0].integer), (yyvsp[-1].array).bits); - } --#line 1773 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1793 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 32: --#line 323 "dtc-parser.y" /* yacc.c:1646 */ -+ case 34: -+#line 339 "dtc-parser.y" /* yacc.c:1646 */ - { - uint64_t val = ~0ULL >> (64 - (yyvsp[-1].array).bits); - -@@ -1787,247 +1807,233 @@ yyreduce: - - (yyval.array).data = data_append_integer((yyvsp[-1].array).data, val, (yyvsp[-1].array).bits); - } --#line 1791 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1811 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 33: --#line 337 "dtc-parser.y" /* yacc.c:1646 */ -+ case 35: -+#line 353 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.array).data = data_add_marker((yyvsp[-1].array).data, LABEL, (yyvsp[0].labelref)); - } --#line 1799 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1819 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 36: --#line 346 "dtc-parser.y" /* yacc.c:1646 */ -+ case 38: -+#line 362 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.integer) = (yyvsp[-1].integer); - } --#line 1807 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1827 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 39: --#line 357 "dtc-parser.y" /* yacc.c:1646 */ -+ case 41: -+#line 373 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = (yyvsp[-4].integer) ? (yyvsp[-2].integer) : (yyvsp[0].integer); } --#line 1813 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1833 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 41: --#line 362 "dtc-parser.y" /* yacc.c:1646 */ -+ case 43: -+#line 378 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = (yyvsp[-2].integer) || (yyvsp[0].integer); } --#line 1819 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1839 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 43: --#line 367 "dtc-parser.y" /* yacc.c:1646 */ -+ case 45: -+#line 383 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = (yyvsp[-2].integer) && (yyvsp[0].integer); } --#line 1825 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1845 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 45: --#line 372 "dtc-parser.y" /* yacc.c:1646 */ -+ case 47: -+#line 388 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = (yyvsp[-2].integer) | (yyvsp[0].integer); } --#line 1831 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1851 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 47: --#line 377 "dtc-parser.y" /* yacc.c:1646 */ -+ case 49: -+#line 393 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = (yyvsp[-2].integer) ^ (yyvsp[0].integer); } --#line 1837 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1857 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 49: --#line 382 "dtc-parser.y" /* yacc.c:1646 */ -+ case 51: -+#line 398 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = (yyvsp[-2].integer) & (yyvsp[0].integer); } --#line 1843 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1863 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 51: --#line 387 "dtc-parser.y" /* yacc.c:1646 */ -+ case 53: -+#line 403 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = (yyvsp[-2].integer) == (yyvsp[0].integer); } --#line 1849 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1869 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 52: --#line 388 "dtc-parser.y" /* yacc.c:1646 */ -+ case 54: -+#line 404 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = (yyvsp[-2].integer) != (yyvsp[0].integer); } --#line 1855 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1875 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 54: --#line 393 "dtc-parser.y" /* yacc.c:1646 */ -+ case 56: -+#line 409 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = (yyvsp[-2].integer) < (yyvsp[0].integer); } --#line 1861 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1881 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 55: --#line 394 "dtc-parser.y" /* yacc.c:1646 */ -+ case 57: -+#line 410 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = (yyvsp[-2].integer) > (yyvsp[0].integer); } --#line 1867 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1887 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 56: --#line 395 "dtc-parser.y" /* yacc.c:1646 */ -+ case 58: -+#line 411 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = (yyvsp[-2].integer) <= (yyvsp[0].integer); } --#line 1873 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1893 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 57: --#line 396 "dtc-parser.y" /* yacc.c:1646 */ -+ case 59: -+#line 412 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = (yyvsp[-2].integer) >= (yyvsp[0].integer); } --#line 1879 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1899 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 58: --#line 400 "dtc-parser.y" /* yacc.c:1646 */ -+ case 60: -+#line 416 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = (yyvsp[-2].integer) << (yyvsp[0].integer); } --#line 1885 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1905 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 59: --#line 401 "dtc-parser.y" /* yacc.c:1646 */ -+ case 61: -+#line 417 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = (yyvsp[-2].integer) >> (yyvsp[0].integer); } --#line 1891 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1911 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 61: --#line 406 "dtc-parser.y" /* yacc.c:1646 */ -+ case 63: -+#line 422 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = (yyvsp[-2].integer) + (yyvsp[0].integer); } --#line 1897 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1917 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 62: --#line 407 "dtc-parser.y" /* yacc.c:1646 */ -+ case 64: -+#line 423 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = (yyvsp[-2].integer) - (yyvsp[0].integer); } --#line 1903 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1923 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 64: --#line 412 "dtc-parser.y" /* yacc.c:1646 */ -+ case 66: -+#line 428 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = (yyvsp[-2].integer) * (yyvsp[0].integer); } --#line 1909 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1929 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 65: --#line 414 "dtc-parser.y" /* yacc.c:1646 */ -- { -- if ((yyvsp[0].integer) != 0) { -- (yyval.integer) = (yyvsp[-2].integer) / (yyvsp[0].integer); -- } else { -- ERROR(&(yyloc), "Division by zero"); -- (yyval.integer) = 0; -- } -- } --#line 1922 "dtc-parser.tab.c" /* yacc.c:1646 */ -+ case 67: -+#line 429 "dtc-parser.y" /* yacc.c:1646 */ -+ { (yyval.integer) = (yyvsp[-2].integer) / (yyvsp[0].integer); } -+#line 1935 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 66: --#line 423 "dtc-parser.y" /* yacc.c:1646 */ -- { -- if ((yyvsp[0].integer) != 0) { -- (yyval.integer) = (yyvsp[-2].integer) % (yyvsp[0].integer); -- } else { -- ERROR(&(yyloc), "Division by zero"); -- (yyval.integer) = 0; -- } -- } --#line 1935 "dtc-parser.tab.c" /* yacc.c:1646 */ -+ case 68: -+#line 430 "dtc-parser.y" /* yacc.c:1646 */ -+ { (yyval.integer) = (yyvsp[-2].integer) % (yyvsp[0].integer); } -+#line 1941 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 69: -+ case 71: - #line 436 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = -(yyvsp[0].integer); } --#line 1941 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1947 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 70: -+ case 72: - #line 437 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = ~(yyvsp[0].integer); } --#line 1947 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1953 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 71: -+ case 73: - #line 438 "dtc-parser.y" /* yacc.c:1646 */ - { (yyval.integer) = !(yyvsp[0].integer); } --#line 1953 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1959 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 72: -+ case 74: - #line 443 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.data) = empty_data; - } --#line 1961 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1967 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 73: -+ case 75: - #line 447 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.data) = data_append_byte((yyvsp[-1].data), (yyvsp[0].byte)); - } --#line 1969 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1975 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 74: -+ case 76: - #line 451 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref)); - } --#line 1977 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1983 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 75: -+ case 77: - #line 458 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.nodelist) = NULL; - } --#line 1985 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1991 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 76: -+ case 78: - #line 462 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.nodelist) = chain_node((yyvsp[-1].node), (yyvsp[0].nodelist)); - } --#line 1993 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 1999 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 77: -+ case 79: - #line 466 "dtc-parser.y" /* yacc.c:1646 */ - { - ERROR(&(yylsp[0]), "Properties must precede subnodes"); - YYERROR; - } --#line 2002 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 2008 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 78: -+ case 80: - #line 474 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.node) = name_node((yyvsp[0].node), (yyvsp[-1].propnodename)); - } --#line 2010 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 2016 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 79: -+ case 81: - #line 478 "dtc-parser.y" /* yacc.c:1646 */ - { - (yyval.node) = name_node(build_node_delete(), (yyvsp[-1].propnodename)); - } --#line 2018 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 2024 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - -- case 80: -+ case 82: - #line 482 "dtc-parser.y" /* yacc.c:1646 */ - { - add_label(&(yyvsp[0].node)->labels, (yyvsp[-1].labelref)); - (yyval.node) = (yyvsp[0].node); - } --#line 2027 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 2033 "dtc-parser.tab.c" /* yacc.c:1646 */ - break; - - --#line 2031 "dtc-parser.tab.c" /* yacc.c:1646 */ -+#line 2037 "dtc-parser.tab.c" /* yacc.c:1646 */ - default: break; - } - /* User semantic actions sometimes alter yychar, and that requires ---- a/scripts/dtc/dtc-parser.tab.h_shipped -+++ b/scripts/dtc/dtc-parser.tab.h_shipped -@@ -46,26 +46,27 @@ extern int yydebug; - enum yytokentype - { - DT_V1 = 258, -- DT_MEMRESERVE = 259, -- DT_LSHIFT = 260, -- DT_RSHIFT = 261, -- DT_LE = 262, -- DT_GE = 263, -- DT_EQ = 264, -- DT_NE = 265, -- DT_AND = 266, -- DT_OR = 267, -- DT_BITS = 268, -- DT_DEL_PROP = 269, -- DT_DEL_NODE = 270, -- DT_PROPNODENAME = 271, -- DT_LITERAL = 272, -- DT_CHAR_LITERAL = 273, -- DT_BYTE = 274, -- DT_STRING = 275, -- DT_LABEL = 276, -- DT_REF = 277, -- DT_INCBIN = 278 -+ DT_PLUGIN = 259, -+ DT_MEMRESERVE = 260, -+ DT_LSHIFT = 261, -+ DT_RSHIFT = 262, -+ DT_LE = 263, -+ DT_GE = 264, -+ DT_EQ = 265, -+ DT_NE = 266, -+ DT_AND = 267, -+ DT_OR = 268, -+ DT_BITS = 269, -+ DT_DEL_PROP = 270, -+ DT_DEL_NODE = 271, -+ DT_PROPNODENAME = 272, -+ DT_LITERAL = 273, -+ DT_CHAR_LITERAL = 274, -+ DT_BYTE = 275, -+ DT_STRING = 276, -+ DT_LABEL = 277, -+ DT_REF = 278, -+ DT_INCBIN = 279 - }; - #endif - -@@ -74,7 +75,7 @@ extern int yydebug; - typedef union YYSTYPE YYSTYPE; - union YYSTYPE - { --#line 38 "dtc-parser.y" /* yacc.c:1909 */ -+#line 39 "dtc-parser.y" /* yacc.c:1909 */ - - char *propnodename; - char *labelref; -@@ -92,8 +93,9 @@ union YYSTYPE - struct node *nodelist; - struct reserve_info *re; - uint64_t integer; -+ bool is_plugin; - --#line 97 "dtc-parser.tab.h" /* yacc.c:1909 */ -+#line 99 "dtc-parser.tab.h" /* yacc.c:1909 */ - }; - # define YYSTYPE_IS_TRIVIAL 1 - # define YYSTYPE_IS_DECLARED 1 ---- a/scripts/dtc/dtc-parser.y -+++ b/scripts/dtc/dtc-parser.y -@@ -19,6 +19,7 @@ - */ - %{ - #include -+#include - - #include "dtc.h" - #include "srcpos.h" -@@ -52,9 +53,11 @@ extern bool treesource_error; - struct node *nodelist; - struct reserve_info *re; - uint64_t integer; -+ bool is_plugin; - } - - %token DT_V1 -+%token DT_PLUGIN - %token DT_MEMRESERVE - %token DT_LSHIFT DT_RSHIFT DT_LE DT_GE DT_EQ DT_NE DT_AND DT_OR - %token DT_BITS -@@ -71,6 +74,7 @@ extern bool treesource_error; - - %type propdata - %type propdataprefix -+%type plugindecl - %type memreserve - %type memreserves - %type arrayprefix -@@ -101,10 +105,22 @@ extern bool treesource_error; - %% - - sourcefile: -- DT_V1 ';' memreserves devicetree -+ DT_V1 ';' plugindecl memreserves devicetree - { -- the_boot_info = build_boot_info($3, $4, -- guess_boot_cpuid($4)); -+ $5->is_plugin = $3; -+ the_boot_info = build_boot_info($4, $5, -+ guess_boot_cpuid($5)); -+ } -+ ; -+ -+plugindecl: -+ /* empty */ -+ { -+ $$ = false; -+ } -+ | DT_PLUGIN ';' -+ { -+ $$ = true; - } - ; - ---- a/scripts/dtc/dtc.c -+++ b/scripts/dtc/dtc.c -@@ -31,6 +31,7 @@ int reservenum; /* Number of memory res - int minsize; /* Minimum blob size */ - int padsize; /* Additional padding to blob */ - int phandle_format = PHANDLE_BOTH; /* Use linux,phandle or phandle properties */ -+int symbol_fixup_support = 0; - - static void fill_fullpaths(struct node *tree, const char *prefix) - { -@@ -53,7 +54,7 @@ static void fill_fullpaths(struct node * - #define FDT_VERSION(version) _FDT_VERSION(version) - #define _FDT_VERSION(version) #version - static const char usage_synopsis[] = "dtc [options] "; --static const char usage_short_opts[] = "qI:O:o:V:d:R:S:p:fb:i:H:sW:E:hv"; -+static const char usage_short_opts[] = "qI:O:o:V:d:R:S:p:fb:i:H:sW:E:@hv"; - static struct option const usage_long_opts[] = { - {"quiet", no_argument, NULL, 'q'}, - {"in-format", a_argument, NULL, 'I'}, -@@ -71,6 +72,7 @@ static struct option const usage_long_op - {"phandle", a_argument, NULL, 'H'}, - {"warning", a_argument, NULL, 'W'}, - {"error", a_argument, NULL, 'E'}, -+ {"symbols", no_argument, NULL, '@'}, - {"help", no_argument, NULL, 'h'}, - {"version", no_argument, NULL, 'v'}, - {NULL, no_argument, NULL, 0x0}, -@@ -101,6 +103,7 @@ static const char * const usage_opts_hel - "\t\tboth - Both \"linux,phandle\" and \"phandle\" properties", - "\n\tEnable/disable warnings (prefix with \"no-\")", - "\n\tEnable/disable errors (prefix with \"no-\")", -+ "\n\tEnable symbols/fixup support", - "\n\tPrint this help and exit", - "\n\tPrint version and exit", - NULL, -@@ -233,7 +236,9 @@ int main(int argc, char *argv[]) - case 'E': - parse_checks_option(false, true, optarg); - break; -- -+ case '@': -+ symbol_fixup_support = 1; -+ break; - case 'h': - usage(NULL); - default: ---- a/scripts/dtc/dtc.h -+++ b/scripts/dtc/dtc.h -@@ -54,6 +54,7 @@ extern int reservenum; /* Number of mem - extern int minsize; /* Minimum blob size */ - extern int padsize; /* Additional padding to blob */ - extern int phandle_format; /* Use linux,phandle or phandle properties */ -+extern int symbol_fixup_support;/* enable symbols & fixup support */ - - #define PHANDLE_LEGACY 0x1 - #define PHANDLE_EPAPR 0x2 -@@ -132,6 +133,26 @@ struct label { - struct label *next; - }; - -+struct fixup_entry { -+ int offset; -+ struct node *node; -+ struct property *prop; -+ struct fixup_entry *next; -+ bool local_fixup_generated; -+}; -+ -+struct fixup { -+ char *ref; -+ struct fixup_entry *entries; -+ struct fixup *next; -+}; -+ -+struct symbol { -+ struct label *label; -+ struct node *node; -+ struct symbol *next; -+}; -+ - struct property { - bool deleted; - char *name; -@@ -158,6 +179,13 @@ struct node { - int addr_cells, size_cells; - - struct label *labels; -+ -+ struct symbol *symbols; -+ struct fixup_entry *local_fixups; -+ bool emit_local_fixup_node; -+ -+ bool is_plugin; -+ struct fixup *fixups; - }; - - #define for_each_label_withdel(l0, l) \ -@@ -181,6 +209,18 @@ struct node { - for_each_child_withdel(n, c) \ - if (!(c)->deleted) - -+#define for_each_fixup(n, f) \ -+ for ((f) = (n)->fixups; (f); (f) = (f)->next) -+ -+#define for_each_fixup_entry(f, fe) \ -+ for ((fe) = (f)->entries; (fe); (fe) = (fe)->next) -+ -+#define for_each_symbol(n, s) \ -+ for ((s) = (n)->symbols; (s); (s) = (s)->next) -+ -+#define for_each_local_fixup_entry(n, fe) \ -+ for ((fe) = (n)->local_fixups; (fe); (fe) = (fe)->next) -+ - void add_label(struct label **labels, char *label); - void delete_labels(struct label **labels); - ---- a/scripts/dtc/flattree.c -+++ b/scripts/dtc/flattree.c -@@ -255,6 +255,204 @@ static int stringtable_insert(struct dat - return i; - } - -+static void emit_local_fixups(struct node *tree, struct emitter *emit, -+ void *etarget, struct data *strbuf, struct version_info *vi, -+ struct node *node) -+{ -+ struct fixup_entry *fe, *fen; -+ struct node *child; -+ int nameoff, count; -+ cell_t *buf; -+ struct data d; -+ -+ if (node->emit_local_fixup_node) { -+ -+ /* emit the external fixups (do not emit /) */ -+ if (node != tree) { -+ emit->beginnode(etarget, NULL); -+ emit->string(etarget, node->name, 0); -+ emit->align(etarget, sizeof(cell_t)); -+ } -+ -+ for_each_local_fixup_entry(tree, fe) { -+ if (fe->node != node || fe->local_fixup_generated) -+ continue; -+ -+ /* count the number of fixup entries */ -+ count = 0; -+ for_each_local_fixup_entry(tree, fen) { -+ if (fen->prop != fe->prop) -+ continue; -+ fen->local_fixup_generated = true; -+ count++; -+ } -+ -+ /* allocate buffer */ -+ buf = xmalloc(count * sizeof(cell_t)); -+ -+ /* collect all the offsets in buffer */ -+ count = 0; -+ for_each_local_fixup_entry(tree, fen) { -+ if (fen->prop != fe->prop) -+ continue; -+ fen->local_fixup_generated = true; -+ buf[count++] = cpu_to_fdt32(fen->offset); -+ } -+ d = empty_data; -+ d.len = count * sizeof(cell_t); -+ d.val = (char *)buf; -+ -+ nameoff = stringtable_insert(strbuf, fe->prop->name); -+ emit->property(etarget, fe->prop->labels); -+ emit->cell(etarget, count * sizeof(cell_t)); -+ emit->cell(etarget, nameoff); -+ -+ if ((vi->flags & FTF_VARALIGN) && -+ (count * sizeof(cell_t)) >= 8) -+ emit->align(etarget, 8); -+ -+ emit->data(etarget, d); -+ emit->align(etarget, sizeof(cell_t)); -+ -+ free(buf); -+ } -+ } -+ -+ for_each_child(node, child) -+ emit_local_fixups(tree, emit, etarget, strbuf, vi, child); -+ -+ if (node->emit_local_fixup_node && node != tree) -+ emit->endnode(etarget, tree->labels); -+} -+ -+static void emit_symbols_node(struct node *tree, struct emitter *emit, -+ void *etarget, struct data *strbuf, -+ struct version_info *vi) -+{ -+ struct symbol *sym; -+ int nameoff, vallen; -+ -+ /* do nothing if no symbols */ -+ if (!tree->symbols) -+ return; -+ -+ emit->beginnode(etarget, NULL); -+ emit->string(etarget, "__symbols__", 0); -+ emit->align(etarget, sizeof(cell_t)); -+ -+ for_each_symbol(tree, sym) { -+ -+ vallen = strlen(sym->node->fullpath); -+ -+ nameoff = stringtable_insert(strbuf, sym->label->label); -+ -+ emit->property(etarget, NULL); -+ emit->cell(etarget, vallen + 1); -+ emit->cell(etarget, nameoff); -+ -+ if ((vi->flags & FTF_VARALIGN) && vallen >= 8) -+ emit->align(etarget, 8); -+ -+ emit->string(etarget, sym->node->fullpath, -+ strlen(sym->node->fullpath)); -+ emit->align(etarget, sizeof(cell_t)); -+ } -+ -+ emit->endnode(etarget, NULL); -+} -+ -+static void emit_local_fixups_node(struct node *tree, struct emitter *emit, -+ void *etarget, struct data *strbuf, -+ struct version_info *vi) -+{ -+ struct fixup_entry *fe; -+ struct node *node; -+ -+ /* do nothing if no local fixups */ -+ if (!tree->local_fixups) -+ return; -+ -+ /* mark all nodes that need a local fixup generated (and parents) */ -+ for_each_local_fixup_entry(tree, fe) { -+ node = fe->node; -+ while (node != NULL && !node->emit_local_fixup_node) { -+ node->emit_local_fixup_node = true; -+ node = node->parent; -+ } -+ } -+ -+ /* emit the local fixups node now */ -+ emit->beginnode(etarget, NULL); -+ emit->string(etarget, "__local_fixups__", 0); -+ emit->align(etarget, sizeof(cell_t)); -+ -+ emit_local_fixups(tree, emit, etarget, strbuf, vi, tree); -+ -+ emit->endnode(etarget, tree->labels); -+} -+ -+static void emit_fixups_node(struct node *tree, struct emitter *emit, -+ void *etarget, struct data *strbuf, -+ struct version_info *vi) -+{ -+ struct fixup *f; -+ struct fixup_entry *fe; -+ char *name, *s; -+ const char *fullpath; -+ int namesz, nameoff, vallen; -+ -+ /* do nothing if no fixups */ -+ if (!tree->fixups) -+ return; -+ -+ /* emit the external fixups */ -+ emit->beginnode(etarget, NULL); -+ emit->string(etarget, "__fixups__", 0); -+ emit->align(etarget, sizeof(cell_t)); -+ -+ for_each_fixup(tree, f) { -+ -+ namesz = 0; -+ for_each_fixup_entry(f, fe) { -+ fullpath = fe->node->fullpath; -+ if (fullpath[0] == '\0') -+ fullpath = "/"; -+ namesz += strlen(fullpath) + 1; -+ namesz += strlen(fe->prop->name) + 1; -+ namesz += 32; /* space for : + '\0' */ -+ } -+ -+ name = xmalloc(namesz); -+ -+ s = name; -+ for_each_fixup_entry(f, fe) { -+ fullpath = fe->node->fullpath; -+ if (fullpath[0] == '\0') -+ fullpath = "/"; -+ snprintf(s, name + namesz - s, "%s:%s:%d", fullpath, -+ fe->prop->name, fe->offset); -+ s += strlen(s) + 1; -+ } -+ -+ nameoff = stringtable_insert(strbuf, f->ref); -+ vallen = s - name - 1; -+ -+ emit->property(etarget, NULL); -+ emit->cell(etarget, vallen + 1); -+ emit->cell(etarget, nameoff); -+ -+ if ((vi->flags & FTF_VARALIGN) && vallen >= 8) -+ emit->align(etarget, 8); -+ -+ emit->string(etarget, name, vallen); -+ emit->align(etarget, sizeof(cell_t)); -+ -+ free(name); -+ } -+ -+ emit->endnode(etarget, tree->labels); -+} -+ - static void flatten_tree(struct node *tree, struct emitter *emit, - void *etarget, struct data *strbuf, - struct version_info *vi) -@@ -310,6 +508,10 @@ static void flatten_tree(struct node *tr - flatten_tree(child, emit, etarget, strbuf, vi); - } - -+ emit_symbols_node(tree, emit, etarget, strbuf, vi); -+ emit_local_fixups_node(tree, emit, etarget, strbuf, vi); -+ emit_fixups_node(tree, emit, etarget, strbuf, vi); -+ - emit->endnode(etarget, tree->labels); - } - ---- a/scripts/dtc/version_gen.h -+++ b/scripts/dtc/version_gen.h -@@ -1 +1 @@ --#define DTC_VERSION "DTC 1.4.1-g53bf130b" -+#define DTC_VERSION "DTC 1.4.1-g25efc119" diff --git a/target/linux/brcm2708/patches-4.9/0054-BCM2708-Add-core-Device-Tree-support.patch b/target/linux/brcm2708/patches-4.9/0054-BCM2708-Add-core-Device-Tree-support.patch deleted file mode 100644 index d9d1fa9a5856..000000000000 --- a/target/linux/brcm2708/patches-4.9/0054-BCM2708-Add-core-Device-Tree-support.patch +++ /dev/null @@ -1,9790 +0,0 @@ -From 589cd87acedc0e24214934816b6c16b4e76a894d Mon Sep 17 00:00:00 2001 -From: notro -Date: Wed, 9 Jul 2014 14:46:08 +0200 -Subject: [PATCH] BCM2708: Add core Device Tree support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add the bare minimum needed to boot BCM2708 from a Device Tree. - -Signed-off-by: Noralf Tronnes - -BCM2708: DT: change 'axi' nodename to 'soc' - -Change DT node named 'axi' to 'soc' so it matches ARCH_BCM2835. -The VC4 bootloader fills in certain properties in the 'axi' subtree, -but since this is part of an upstreaming effort, the name is changed. - -Signed-off-by: Noralf Tronnes notro@tronnes.org - -BCM2708_DT: Correct length of the peripheral space - -Use dts-dirs feature for overlays. - -The kernel makefiles have a dts-dirs target that is for vendor subdirectories. - -Using this fixes the install_dtbs target, which previously did not install the overlays. - -BCM270X_DT: configure I2S DMA channels - -Signed-off-by: Matthias Reichl - -BCM270X_DT: switch to bcm2835-i2s - -I2S soundcard drivers with proper devicetree support (i.e. not linking -to the cpu_dai/platform via name but to cpu/platform via of_node) -will work out of the box without any modifications. - -When the kernel is compiled without devicetree support the platform -code will instantiate the bcm2708-i2s driver and I2S soundcard drivers -will link to it via name, as before. - -Signed-off-by: Matthias Reichl - -SDIO-overlay: add poll_once-boolean parameter - -Add paramter to toggle sdio-device-polling -done every second or once at boot-time. - -Signed-off-by: Patrick Boettcher - -BCM270X_DT: Make mmc overlay compatible with current firmware - -The original DT overlay logic followed a merge-then-patch procedure, -i.e. parameters are applied to the loaded overlay before the overlay -is merged into the base DTB. This sequence has been changed to -patch-then-merge, in order to support parameterised node names, and -to protect against bad overlays. As a result, overrides (parameters) -must only target labels in the overlay, but the overlay can obviously target nodes in the base DTB. - -mmc-overlay.dts (that switches back to the original mmc sdcard -driver) is the only overlay violating that rule, and this patch -fixes it. - -bcm270x_dt: Use the sdhost MMC controller by default - -The "mmc" overlay reverts to using the other controller. - -squash: Add cprman to dt - -BCM270X_DT: Use clk_core for I2C interfaces - -BCM270X_DT: Use bcm283x.dtsi, bcm2835.dtsi and bcm2836.dtsi - -The mainline Device Tree files are quite close to downstream now. -Let's use bcm283x.dtsi, bcm2835.dtsi and bcm2836.dtsi as base files -for our dts files. - -Mainline dts files are based on these files: - - bcm2835-rpi.dtsi - bcm2835.dtsi bcm2836.dtsi - bcm283x.dtsi - -Current downstream are based on these: - - bcm2708.dtsi bcm2709.dtsi bcm2710.dtsi - bcm2708_common.dtsi - -This patch introduces this dependency: - - bcm2708.dtsi bcm2709.dtsi - bcm2708-rpi.dtsi - bcm270x.dtsi - bcm2835.dtsi bcm2836.dtsi - bcm283x.dtsi - -And: - bcm2710.dtsi - bcm2708-rpi.dtsi - bcm270x.dtsi - bcm283x.dtsi - -bcm270x.dtsi contains the downstream bcm283x.dtsi diff. -bcm2708-rpi.dtsi is the downstream version of bcm2835-rpi.dtsi. - -Other changes: -- The led node has moved from /soc/leds to /leds. This is not a problem - since the label is used to reference it. -- The clk_osc reg property changes from 6 to 3. -- The gpu nodes has their interrupt property set in the base file. -- the clocks label does not point to the /clocks node anymore, but - points to the cprman node. This is not a problem since the overlays - that use the clock node refer to it directly: target-path = "/clocks"; -- some nodes now have 2 labels since mainline and downstream differs in - this respect: cprman/clocks, spi0/spi, gpu/vc4. -- some nodes doesn't have an explicit status = "okay" since they're not - disabled in the base file: watchdog and random. -- gpiomem doesn't need an explicit status = "okay". -- bcm2708-rpi-cm.dts got the hpd-gpios property from bcm2708_common.dtsi, - it's now set directly in that file. -- bcm2709-rpi-2-b.dts has the timer node moved from /soc/timer to /timer. -- Removed clock-frequency property on the bcm{2709,2710}.dtsi timer nodes. - -Signed-off-by: Noralf Trønnes - -BCM270X_DT: Use raspberrypi-power to turn on USB power - -Use the raspberrypi-power driver to turn on USB power. - -Signed-off-by: Noralf Trønnes - -BCM270X_DT: Add a .dtbo target, use for overlays - -Change the filenames and extensions to keep the pre-DDT style of -overlay (-overlay.dtb) distinct from new ones that use a -different style of local fixups (.dtbo), and to match other -platforms. - -The RPi firmware uses the DDTK trailer atom to choose which type of -overlay to use for each kernel. - -Signed-off-by: Phil Elwell - -BCM270X_DT: Don't generate "linux,phandle" props - -The EPAPR standard says to use "phandle" properties to store phandles, -rather than the deprecated "linux,phandle" version. By default, dtc -generates both, but adding "-H epapr" causes it to only generate -"phandle"s, saving some space and clutter. - -Signed-off-by: Phil Elwell - -BCM270X_DT: Add overlay for enc28j60 on SPI2 - -Works on SPI2 for compute module - -BCM270X_DT: Add midi-uart0 overlay - -MIDI requires 31.25kbaud, a baudrate unsupported by Linux. The -midi-uart0 overlay configures uart0 (ttyAMA0) to use a fake clock -so that requesting 38.4kbaud actually gets 31.25kbaud. - -Signed-off-by: Phil Elwell - -BCM270X_DT: Add i2c-sensor overlay - -The i2c-sensor overlay is a container for various pressure and -temperature sensors, currently bmp085 and bmp280. The standalone -bmp085_i2c-sensor overlay is now deprecated. - -Signed-off-by: Phil Elwell - -BCM270X_DT: overlays/*-overlay.dtb -> overlays/*.dtbo (#1752) - -We now create overlays as .dtbo files. - -build: support for .dtbo files for dtb overlays - -Kernel 4.4.6+ on RaspberryPi support .dtbo files for overlays, instead of .dtb. -Patch the kernel, which has faulty rules to generate .dtbo the way yocto does - -Signed-off-by: Herve Jourdain -Signed-off-by: Khem Raj ---- - arch/arm/Makefile | 2 + - arch/arm/boot/.gitignore | 2 +- - arch/arm/boot/dts/Makefile | 19 + - arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 156 +++ - arch/arm/boot/dts/bcm2708-rpi-b.dts | 146 +++ - arch/arm/boot/dts/bcm2708-rpi-cm.dts | 105 ++ - arch/arm/boot/dts/bcm2708-rpi-cm.dtsi | 50 + - arch/arm/boot/dts/bcm2708-rpi.dtsi | 109 ++ - arch/arm/boot/dts/bcm2708.dtsi | 16 + - arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 156 +++ - arch/arm/boot/dts/bcm2709.dtsi | 22 + - arch/arm/boot/dts/bcm270x.dtsi | 141 ++ - arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 203 +++ - arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 155 +++ - arch/arm/boot/dts/bcm2710.dtsi | 155 +++ - arch/arm/boot/dts/overlays/Makefile | 105 ++ - arch/arm/boot/dts/overlays/README | 1368 ++++++++++++++++++++ - .../arm/boot/dts/overlays/adau1977-adc-overlay.dts | 53 + - arch/arm/boot/dts/overlays/ads1015-overlay.dts | 98 ++ - arch/arm/boot/dts/overlays/ads7846-overlay.dts | 89 ++ - .../dts/overlays/akkordion-iqdacplus-overlay.dts | 46 + - .../allo-piano-dac-pcm512x-audio-overlay.dts | 54 + - arch/arm/boot/dts/overlays/at86rf233-overlay.dts | 57 + - .../audioinjector-wm8731-audio-overlay.dts | 39 + - arch/arm/boot/dts/overlays/audremap-overlay.dts | 19 + - .../dts/overlays/bmp085_i2c-sensor-overlay.dts | 23 + - arch/arm/boot/dts/overlays/dht11-overlay.dts | 39 + - .../boot/dts/overlays/dionaudio-loco-overlay.dts | 39 + - arch/arm/boot/dts/overlays/dpi18-overlay.dts | 31 + - arch/arm/boot/dts/overlays/dpi24-overlay.dts | 31 + - arch/arm/boot/dts/overlays/dwc-otg-overlay.dts | 20 + - arch/arm/boot/dts/overlays/dwc2-overlay.dts | 29 + - arch/arm/boot/dts/overlays/enc28j60-overlay.dts | 53 + - .../boot/dts/overlays/enc28j60-spi2-overlay.dts | 47 + - arch/arm/boot/dts/overlays/gpio-ir-overlay.dts | 44 + - .../boot/dts/overlays/gpio-poweroff-overlay.dts | 34 + - .../boot/dts/overlays/hifiberry-amp-overlay.dts | 39 + - .../boot/dts/overlays/hifiberry-dac-overlay.dts | 34 + - .../dts/overlays/hifiberry-dacplus-overlay.dts | 56 + - .../boot/dts/overlays/hifiberry-digi-overlay.dts | 39 + - .../dts/overlays/hifiberry-digi-pro-overlay.dts | 41 + - arch/arm/boot/dts/overlays/hy28a-overlay.dts | 93 ++ - arch/arm/boot/dts/overlays/hy28b-overlay.dts | 148 +++ - arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts | 13 + - arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts | 43 + - arch/arm/boot/dts/overlays/i2c-mux-overlay.dts | 139 ++ - .../boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts | 26 + - arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts | 83 ++ - arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts | 34 + - .../arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts | 61 + - .../arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts | 37 + - .../boot/dts/overlays/i2s-gpio28-31-overlay.dts | 18 + - arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts | 43 + - .../boot/dts/overlays/iqaudio-dacplus-overlay.dts | 46 + - .../overlays/iqaudio-digi-wm8804-audio-overlay.dts | 47 + - .../arm/boot/dts/overlays/justboom-dac-overlay.dts | 43 + - .../boot/dts/overlays/justboom-digi-overlay.dts | 39 + - arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts | 57 + - arch/arm/boot/dts/overlays/mcp23017-overlay.dts | 54 + - arch/arm/boot/dts/overlays/mcp23s17-overlay.dts | 732 +++++++++++ - .../arm/boot/dts/overlays/mcp2515-can0-overlay.dts | 73 ++ - .../arm/boot/dts/overlays/mcp2515-can1-overlay.dts | 73 ++ - arch/arm/boot/dts/overlays/midi-uart0-overlay.dts | 36 + - arch/arm/boot/dts/overlays/mmc-overlay.dts | 38 + - arch/arm/boot/dts/overlays/mz61581-overlay.dts | 117 ++ - arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts | 27 + - .../boot/dts/overlays/pi3-disable-bt-overlay.dts | 46 + - .../boot/dts/overlays/pi3-miniuart-bt-overlay.dts | 64 + - arch/arm/boot/dts/overlays/piscreen-overlay.dts | 102 ++ - arch/arm/boot/dts/overlays/piscreen2r-overlay.dts | 106 ++ - arch/arm/boot/dts/overlays/pisound-overlay.dts | 114 ++ - arch/arm/boot/dts/overlays/pitft22-overlay.dts | 69 + - .../dts/overlays/pitft28-capacitive-overlay.dts | 91 ++ - .../dts/overlays/pitft28-resistive-overlay.dts | 121 ++ - .../dts/overlays/pitft35-resistive-overlay.dts | 121 ++ - arch/arm/boot/dts/overlays/pps-gpio-overlay.dts | 35 + - arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts | 47 + - arch/arm/boot/dts/overlays/pwm-overlay.dts | 43 + - arch/arm/boot/dts/overlays/qca7000-overlay.dts | 52 + - arch/arm/boot/dts/overlays/raspidac3-overlay.dts | 45 + - .../boot/dts/overlays/rpi-backlight-overlay.dts | 21 + - arch/arm/boot/dts/overlays/rpi-dac-overlay.dts | 34 + - arch/arm/boot/dts/overlays/rpi-display-overlay.dts | 89 ++ - arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts | 17 + - arch/arm/boot/dts/overlays/rpi-proto-overlay.dts | 39 + - arch/arm/boot/dts/overlays/rpi-sense-overlay.dts | 47 + - .../overlays/rra-digidac1-wm8741-audio-overlay.dts | 81 ++ - .../boot/dts/overlays/sc16is750-i2c-overlay.dts | 37 + - .../boot/dts/overlays/sc16is752-spi1-overlay.dts | 61 + - arch/arm/boot/dts/overlays/sdhost-overlay.dts | 32 + - arch/arm/boot/dts/overlays/sdio-1bit-overlay.dts | 36 + - arch/arm/boot/dts/overlays/sdio-overlay.dts | 36 + - arch/arm/boot/dts/overlays/sdtweak-overlay.dts | 23 + - arch/arm/boot/dts/overlays/smi-dev-overlay.dts | 18 + - arch/arm/boot/dts/overlays/smi-nand-overlay.dts | 69 + - arch/arm/boot/dts/overlays/smi-overlay.dts | 37 + - .../boot/dts/overlays/spi-gpio35-39-overlay.dts | 31 + - arch/arm/boot/dts/overlays/spi-rtc-overlay.dts | 33 + - arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts | 26 + - arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts | 57 + - arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts | 69 + - arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts | 81 ++ - arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts | 57 + - arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts | 69 + - arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts | 81 ++ - arch/arm/boot/dts/overlays/tinylcd35-overlay.dts | 224 ++++ - arch/arm/boot/dts/overlays/uart1-overlay.dts | 38 + - .../arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts | 89 ++ - arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 136 ++ - arch/arm/boot/dts/overlays/vga666-overlay.dts | 30 + - arch/arm/boot/dts/overlays/w1-gpio-overlay.dts | 39 + - .../boot/dts/overlays/w1-gpio-pullup-overlay.dts | 41 + - arch/arm/boot/dts/overlays/wittypi-overlay.dts | 44 + - scripts/Makefile.dtbinst | 10 +- - scripts/Makefile.lib | 11 + - 115 files changed, 8979 insertions(+), 4 deletions(-) - create mode 100644 arch/arm/boot/dts/bcm2708-rpi-b-plus.dts - create mode 100644 arch/arm/boot/dts/bcm2708-rpi-b.dts - create mode 100644 arch/arm/boot/dts/bcm2708-rpi-cm.dts - create mode 100644 arch/arm/boot/dts/bcm2708-rpi-cm.dtsi - create mode 100644 arch/arm/boot/dts/bcm2708-rpi.dtsi - create mode 100644 arch/arm/boot/dts/bcm2708.dtsi - create mode 100644 arch/arm/boot/dts/bcm2709-rpi-2-b.dts - create mode 100644 arch/arm/boot/dts/bcm2709.dtsi - create mode 100644 arch/arm/boot/dts/bcm270x.dtsi - create mode 100644 arch/arm/boot/dts/bcm2710-rpi-3-b.dts - create mode 100644 arch/arm/boot/dts/bcm2710-rpi-cm3.dts - create mode 100644 arch/arm/boot/dts/bcm2710.dtsi - create mode 100644 arch/arm/boot/dts/overlays/Makefile - create mode 100644 arch/arm/boot/dts/overlays/README - create mode 100644 arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/ads1015-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/ads7846-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/at86rf233-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/audremap-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/dht11-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/dpi18-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/dpi24-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/dwc-otg-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/dwc2-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/enc28j60-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/gpio-ir-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hy28a-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hy28b-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c-mux-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/justboom-dac-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/justboom-digi-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/mcp23017-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/mcp23s17-overlay.dts - create mode 100755 arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/midi-uart0-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/mmc-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/mz61581-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/piscreen-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/piscreen2r-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pisound-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pitft22-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pps-gpio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pwm-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/qca7000-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/raspidac3-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rpi-dac-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rpi-display-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rpi-proto-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rpi-sense-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/sdhost-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/sdio-1bit-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/sdio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/sdtweak-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/smi-dev-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/smi-nand-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/smi-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi-rtc-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/tinylcd35-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/uart1-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/vga666-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/w1-gpio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/wittypi-overlay.dts - ---- a/arch/arm/Makefile -+++ b/arch/arm/Makefile -@@ -334,6 +334,8 @@ $(INSTALL_TARGETS): - - %.dtb: | scripts - $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@ -+%.dtbo: | scripts -+ $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@ - - PHONY += dtbs dtbs_install - ---- a/arch/arm/boot/.gitignore -+++ b/arch/arm/boot/.gitignore -@@ -3,4 +3,4 @@ zImage - xipImage - bootpImage - uImage --*.dtb -+*.dtb* ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -1,5 +1,13 @@ - ifeq ($(CONFIG_OF),y) - -+dtb-$(CONFIG_ARCH_BCM2835) += \ -+ bcm2708-rpi-b.dtb \ -+ bcm2708-rpi-b-plus.dtb \ -+ bcm2708-rpi-cm.dtb \ -+ bcm2709-rpi-2-b.dtb \ -+ bcm2710-rpi-3-b.dtb \ -+ bcm2710-rpi-cm3.dtb -+ - dtb-$(CONFIG_ARCH_ALPINE) += \ - alpine-db.dtb - dtb-$(CONFIG_MACH_ARTPEC6) += \ -@@ -955,10 +963,21 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ - dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb - dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \ - aspeed-ast2500-evb.dtb -+ -+targets += dtbs dtbs_install -+targets += $(dtb-y) -+ - endif - - dtstree := $(srctree)/$(src) - dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) - - always := $(dtb-y) -+subdir-y := overlays - clean-files := *.dtb -+ -+# Enable fixups to support overlays on BCM2835 platforms -+ifeq ($(CONFIG_ARCH_BCM2835),y) -+ DTC_FLAGS ?= -@ -H epapr -+ dts-dirs += overlays -+endif ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts -@@ -0,0 +1,156 @@ -+/dts-v1/; -+ -+#include "bcm2708.dtsi" -+ -+/ { -+ model = "Raspberry Pi Model B+"; -+}; -+ -+&gpio { -+ sdhost_pins: sdhost_pins { -+ brcm,pins = <48 49 50 51 52 53>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <40 45>; -+ brcm,function = <4>; -+ }; -+}; -+ -+&sdhost { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdhost_pins>; -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&fb { -+ status = "okay"; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 47 0>; -+ }; -+ -+ pwr_led: pwr { -+ label = "led1"; -+ linux,default-trigger = "input"; -+ gpios = <&gpio 35 0>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ uart0 = <&uart0>,"status"; -+ uart1 = <&uart1>,"status"; -+ i2s = <&i2s>,"status"; -+ spi = <&spi0>,"status"; -+ i2c0 = <&i2c0>,"status"; -+ i2c1 = <&i2c1>,"status"; -+ i2c2_iknowwhatimdoing = <&i2c2>,"status"; -+ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; -+ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; -+ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; -+ -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ -+ pwr_led_gpio = <&pwr_led>,"gpios:4"; -+ pwr_led_activelow = <&pwr_led>,"gpios:8"; -+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; -+ -+ audio = <&audio>,"status"; -+ watchdog = <&watchdog>,"status"; -+ random = <&random>,"status"; -+ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; -+ sd_force_pio = <&sdhost>,"brcm,force-pio?"; -+ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; -+ sd_debug = <&sdhost>,"brcm,debug"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts -@@ -0,0 +1,146 @@ -+/dts-v1/; -+ -+#include "bcm2708.dtsi" -+ -+/ { -+ model = "Raspberry Pi Model B"; -+}; -+ -+&gpio { -+ sdhost_pins: sdhost_pins { -+ brcm,pins = <48 49 50 51 52 53>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <28 29 30 31>; -+ brcm,function = <6>; /* alt2 */ -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <40 45>; -+ brcm,function = <4>; -+ }; -+}; -+ -+&sdhost { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdhost_pins>; -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&fb { -+ status = "okay"; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 16 1>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ uart0 = <&uart0>,"status"; -+ uart1 = <&uart1>,"status"; -+ i2s = <&i2s>,"status"; -+ spi = <&spi0>,"status"; -+ i2c0 = <&i2c0>,"status"; -+ i2c1 = <&i2c1>,"status"; -+ i2c2_iknowwhatimdoing = <&i2c2>,"status"; -+ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; -+ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; -+ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; -+ -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ -+ audio = <&audio>,"status"; -+ watchdog = <&watchdog>,"status"; -+ random = <&random>,"status"; -+ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; -+ sd_force_pio = <&sdhost>,"brcm,force-pio?"; -+ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; -+ sd_debug = <&sdhost>,"brcm,debug"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts -@@ -0,0 +1,105 @@ -+/dts-v1/; -+ -+#include "bcm2708-rpi-cm.dtsi" -+ -+/ { -+ model = "Raspberry Pi Compute Module"; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&gpio { -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins; -+ brcm,function; -+ }; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&hdmi { -+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; -+}; -+ -+/ { -+ __overrides__ { -+ uart0 = <&uart0>,"status"; -+ uart1 = <&uart1>,"status"; -+ i2s = <&i2s>,"status"; -+ spi = <&spi0>,"status"; -+ i2c0 = <&i2c0>,"status"; -+ i2c1 = <&i2c1>,"status"; -+ i2c2_iknowwhatimdoing = <&i2c2>,"status"; -+ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; -+ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; -+ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi -@@ -0,0 +1,50 @@ -+#include "bcm2708.dtsi" -+ -+&gpio { -+ sdhost_pins: sdhost_pins { -+ brcm,pins = <48 49 50 51 52 53>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+}; -+ -+&gpio { -+ mmc_pins: mmc_pins { -+ brcm,pins = <48 49 50 51 52 53>; -+ brcm,function = <7>; /* alt3 */ -+ }; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 47 0>; -+ }; -+}; -+ -+ -+&sdhost { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdhost_pins>; -+ non-removable; -+ bus-width = <4>; -+ status = "okay"; -+ brcm,overclock-50 = <0>; -+}; -+ -+&fb { -+ status = "okay"; -+}; -+ -+/ { -+ __overrides__ { -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ -+ audio = <&audio>,"status"; -+ watchdog = <&watchdog>,"status"; -+ random = <&random>,"status"; -+ sd_overclock = <&mmc>,"brcm,overclock-50:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi -@@ -0,0 +1,109 @@ -+/* Downstream version of bcm2835-rpi.dtsi */ -+ -+#include -+ -+/ { -+ memory { -+ device_type = "memory"; -+ reg = <0x0 0x0>; -+ }; -+ -+ aliases { -+ audio = &audio; -+ aux = &aux; -+ sound = &sound; -+ soc = &soc; -+ dma = &dma; -+ intc = &intc; -+ watchdog = &watchdog; -+ random = &random; -+ mailbox = &mailbox; -+ gpio = &gpio; -+ uart0 = &uart0; -+ sdhost = &sdhost; -+ i2s = &i2s; -+ spi0 = &spi0; -+ i2c0 = &i2c0; -+ uart1 = &uart1; -+ spi1 = &spi1; -+ spi2 = &spi2; -+ mmc = &mmc; -+ i2c1 = &i2c1; -+ i2c2 = &i2c2; -+ usb = &usb; -+ leds = &leds; -+ fb = &fb; -+ vchiq = &vchiq; -+ thermal = &thermal; -+ }; -+ -+ leds: leds { -+ compatible = "gpio-leds"; -+ }; -+ -+ soc { -+ gpiomem { -+ compatible = "brcm,bcm2835-gpiomem"; -+ reg = <0x7e200000 0x1000>; -+ }; -+ -+ firmware: firmware { -+ compatible = "raspberrypi,bcm2835-firmware"; -+ mboxes = <&mailbox>; -+ }; -+ -+ power: power { -+ compatible = "raspberrypi,bcm2835-power"; -+ firmware = <&firmware>; -+ #power-domain-cells = <1>; -+ }; -+ -+ fb: fb { -+ compatible = "brcm,bcm2708-fb"; -+ firmware = <&firmware>; -+ status = "disabled"; -+ }; -+ -+ vchiq: vchiq { -+ compatible = "brcm,bcm2835-vchiq"; -+ reg = <0x7e00b840 0xf>; -+ interrupts = <0 2>; -+ cache-line-size = <32>; -+ firmware = <&firmware>; -+ }; -+ -+ thermal: thermal { -+ compatible = "brcm,bcm2835-thermal"; -+ firmware = <&firmware>; -+ }; -+ -+ /* Onboard audio */ -+ audio: audio { -+ compatible = "brcm,bcm2835-audio"; -+ brcm,pwm-channels = <8>; -+ status = "disabled"; -+ }; -+ -+ /* External sound card */ -+ sound: sound { -+ status = "disabled"; -+ }; -+ -+ }; -+ -+ __overrides__ { -+ cache_line_size = <&vchiq>, "cache-line-size:0"; -+ }; -+}; -+ -+&dma { -+ brcm,dma-channel-mask = <0x7f34>; -+}; -+ -+&hdmi { -+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; -+}; -+ -+&usb { -+ power-domains = <&power RPI_POWER_DOMAIN_USB>; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2708.dtsi -@@ -0,0 +1,16 @@ -+#include "bcm2835.dtsi" -+#include "bcm270x.dtsi" -+#include "bcm2708-rpi.dtsi" -+ -+/ { -+ soc { -+ timer@7e003000 { -+ compatible = "brcm,bcm2835-system-timer"; -+ reg = <0x7e003000 0x1000>; -+ interrupts = <1 0>, <1 1>, <1 2>, <1 3>; -+ clock-frequency = <1000000>; -+ }; -+ }; -+ -+ /delete-node/ cpus; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts -@@ -0,0 +1,156 @@ -+/dts-v1/; -+ -+#include "bcm2709.dtsi" -+ -+/ { -+ model = "Raspberry Pi 2 Model B"; -+}; -+ -+&gpio { -+ sdhost_pins: sdhost_pins { -+ brcm,pins = <48 49 50 51 52 53>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <40 45>; -+ brcm,function = <4>; -+ }; -+}; -+ -+&sdhost { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdhost_pins>; -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&fb { -+ status = "okay"; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 47 0>; -+ }; -+ -+ pwr_led: pwr { -+ label = "led1"; -+ linux,default-trigger = "input"; -+ gpios = <&gpio 35 0>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ uart0 = <&uart0>,"status"; -+ uart1 = <&uart1>,"status"; -+ i2s = <&i2s>,"status"; -+ spi = <&spi0>,"status"; -+ i2c0 = <&i2c0>,"status"; -+ i2c1 = <&i2c1>,"status"; -+ i2c2_iknowwhatimdoing = <&i2c2>,"status"; -+ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; -+ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; -+ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; -+ -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ -+ pwr_led_gpio = <&pwr_led>,"gpios:4"; -+ pwr_led_activelow = <&pwr_led>,"gpios:8"; -+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; -+ -+ audio = <&audio>,"status"; -+ watchdog = <&watchdog>,"status"; -+ random = <&random>,"status"; -+ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; -+ sd_force_pio = <&sdhost>,"brcm,force-pio?"; -+ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; -+ sd_debug = <&sdhost>,"brcm,debug"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2709.dtsi -@@ -0,0 +1,22 @@ -+#include "bcm2836.dtsi" -+#include "bcm270x.dtsi" -+#include "bcm2708-rpi.dtsi" -+ -+/ { -+ soc { -+ ranges = <0x7e000000 0x3f000000 0x01000000>, -+ <0x40000000 0x40000000 0x00040000>; -+ -+ syscon@40000000 { -+ compatible = "brcm,bcm2836-arm-local", "syscon"; -+ reg = <0x40000000 0x100>; -+ }; -+ }; -+ -+ __overrides__ { -+ arm_freq = <&v7_cpu0>, "clock-frequency:0", -+ <&v7_cpu1>, "clock-frequency:0", -+ <&v7_cpu2>, "clock-frequency:0", -+ <&v7_cpu3>, "clock-frequency:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm270x.dtsi -@@ -0,0 +1,141 @@ -+/* Downstream bcm283x.dtsi diff */ -+#include "dt-bindings/power/raspberrypi-power.h" -+ -+/ { -+ chosen { -+ bootargs = ""; -+ }; -+ -+ soc: soc { -+ -+ /delete-node/ timer@7e003000; -+ -+ watchdog: watchdog@7e100000 { -+ /* Add alias */ -+ }; -+ -+ cprman: cprman@7e101000 { -+ /* Add alias */ -+ }; -+ -+ random: rng@7e104000 { -+ /* Add alias */ -+ }; -+ -+ gpio@7e200000 { /* gpio */ -+ interrupts = <2 17>, <2 18>; -+ }; -+ -+ sdhost: sdhost@7e202000 { -+ compatible = "brcm,bcm2835-sdhost"; -+ reg = <0x7e202000 0x100>; -+ interrupts = <2 24>; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ dmas = <&dma 13>; -+ dma-names = "rx-tx"; -+ brcm,overclock-50 = <0>; -+ brcm,pio-limit = <1>; -+ status = "disabled"; -+ }; -+ -+ i2s@7e203000 { /* i2s */ -+ #sound-dai-cells = <0>; -+ reg = <0x7e203000 0x24>; -+ clocks = <&clocks BCM2835_CLOCK_PCM>; -+ }; -+ -+ spi0: spi@7e204000 { -+ /* Add alias */ -+ dmas = <&dma 6>, <&dma 7>; -+ dma-names = "tx", "rx"; -+ }; -+ -+ pixelvalve0: pixelvalve@7e206000 { -+ /* Add alias */ -+ status = "disabled"; -+ }; -+ -+ pixelvalve1: pixelvalve@7e207000 { -+ /* Add alias */ -+ status = "disabled"; -+ }; -+ -+ dpi: dpi@7e208000 { -+ compatible = "brcm,bcm2835-dpi"; -+ reg = <0x7e208000 0x8c>; -+ clocks = <&clocks BCM2835_CLOCK_VPU>, -+ <&clocks BCM2835_CLOCK_DPI>; -+ clock-names = "core", "pixel"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ /delete-node/ sdhci@7e300000; -+ -+ mmc: mmc@7e300000 { -+ compatible = "brcm,bcm2835-mmc"; -+ reg = <0x7e300000 0x100>; -+ interrupts = <2 30>; -+ clocks = <&clocks BCM2835_CLOCK_EMMC>; -+ dmas = <&dma 11>; -+ dma-names = "rx-tx"; -+ brcm,overclock-50 = <0>; -+ status = "disabled"; -+ }; -+ -+ hvs: hvs@7e400000 { -+ /* Add alias */ -+ status = "disabled"; -+ }; -+ -+ firmwarekms: firmwarekms@7e600000 { -+ compatible = "raspberrypi,rpi-firmware-kms"; -+ /* SMI interrupt reg */ -+ reg = <0x7e600000 0x100>; -+ interrupts = <2 16>; -+ brcm,firmware = <&firmware>; -+ status = "disabled"; -+ }; -+ -+ smi: smi@7e600000 { -+ compatible = "brcm,bcm2835-smi"; -+ reg = <0x7e600000 0x100>; -+ interrupts = <2 16>; -+ clocks = <&clocks BCM2835_CLOCK_SMI>; -+ assigned-clocks = <&cprman BCM2835_CLOCK_SMI>; -+ assigned-clock-rates = <125000000>; -+ dmas = <&dma 4>; -+ dma-names = "rx-tx"; -+ status = "disabled"; -+ }; -+ -+ pixelvalve2: pixelvalve@7e807000 { -+ /* Add alias */ -+ status = "disabled"; -+ }; -+ -+ hdmi@7e902000 { /* hdmi */ -+ status = "disabled"; -+ }; -+ -+ usb@7e980000 { /* usb */ -+ compatible = "brcm,bcm2708-usb"; -+ reg = <0x7e980000 0x10000>, -+ <0x7e006000 0x1000>; -+ interrupts = <2 0>, -+ <1 9>; -+ }; -+ -+ v3d@7ec00000 { /* vd3 */ -+ compatible = "brcm,vc4-v3d"; -+ power-domains = <&power RPI_POWER_DOMAIN_V3D>; -+ status = "disabled"; -+ }; -+ -+ gpu: gpu { -+ /* Add alias */ -+ status = "disabled"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -@@ -0,0 +1,203 @@ -+/dts-v1/; -+ -+#ifdef RPI364 -+/memreserve/ 0x00000000 0x00001000; -+#endif -+ -+#include "bcm2710.dtsi" -+ -+/ { -+ model = "Raspberry Pi 3 Model B"; -+}; -+ -+&gpio { -+ sdhost_pins: sdhost_pins { -+ brcm,pins = <48 49 50 51 52 53>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ sdio_pins: sdio_pins { -+ brcm,pins = <34 35 36 37 38 39>; -+ brcm,function = <7>; // alt3 = SD1 -+ brcm,pull = <0 2 2 2 2 2>; -+ }; -+ -+ bt_pins: bt_pins { -+ brcm,pins = <43>; -+ brcm,function = <4>; /* alt0:GPCLK2 */ -+ brcm,pull = <0>; -+ }; -+ -+ uart0_pins: uart0_pins { -+ brcm,pins = <32 33>; -+ brcm,function = <7>; /* alt3=UART0 */ -+ brcm,pull = <0 2>; -+ }; -+ -+ uart1_pins: uart1_pins { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <40 41>; -+ brcm,function = <4>; -+ }; -+}; -+ -+&sdhost { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdhost_pins>; -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&mmc { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdio_pins>; -+ non-removable; -+ bus-width = <4>; -+ status = "okay"; -+ brcm,overclock-50 = <0>; -+}; -+ -+&soc { -+ virtgpio: virtgpio { -+ compatible = "brcm,bcm2835-virtgpio"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ firmware = <&firmware>; -+ status = "okay"; -+ }; -+}; -+ -+&fb { -+ status = "okay"; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins &bt_pins>; -+ status = "okay"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&virtgpio 0 0>; -+ }; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ chosen { -+ bootargs = "8250.nr_uarts=1"; -+ }; -+}; -+ -+/ { -+ __overrides__ { -+ uart0 = <&uart0>,"status"; -+ uart1 = <&uart1>,"status"; -+ i2s = <&i2s>,"status"; -+ spi = <&spi0>,"status"; -+ i2c0 = <&i2c0>,"status"; -+ i2c1 = <&i2c1>,"status"; -+ i2c2_iknowwhatimdoing = <&i2c2>,"status"; -+ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; -+ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; -+ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; -+ -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ -+ audio = <&audio>,"status"; -+ watchdog = <&watchdog>,"status"; -+ random = <&random>,"status"; -+ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; -+ sd_force_pio = <&sdhost>,"brcm,force-pio?"; -+ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; -+ sd_debug = <&sdhost>,"brcm,debug"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts -@@ -0,0 +1,155 @@ -+/dts-v1/; -+ -+#include "bcm2710.dtsi" -+ -+/ { -+ model = "Raspberry Pi Compute Module 3"; -+}; -+ -+&gpio { -+ sdhost_pins: sdhost_pins { -+ brcm,pins = <48 49 50 51 52 53>; -+ brcm,function = <4>; /* alt0 */ -+ brcm,pull = <0 2 2 2 2 2>; -+ }; -+ -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins; -+ brcm,function; -+ }; -+}; -+ -+&sdhost { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdhost_pins>; -+ non-removable; -+ bus-width = <4>; -+ status = "okay"; -+ brcm,overclock-50 = <0>; -+}; -+ -+&soc { -+ virtgpio: virtgpio { -+ compatible = "brcm,bcm2835-virtgpio"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ firmware = <&firmware>; -+ status = "okay"; -+ }; -+}; -+ -+&fb { -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&virtgpio 0 0>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ uart0 = <&uart0>,"status"; -+ uart1 = <&uart1>,"status"; -+ i2s = <&i2s>,"status"; -+ spi = <&spi0>,"status"; -+ i2c0 = <&i2c0>,"status"; -+ i2c1 = <&i2c1>,"status"; -+ i2c2_iknowwhatimdoing = <&i2c2>,"status"; -+ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; -+ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; -+ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; -+ -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ -+ audio = <&audio>,"status"; -+ watchdog = <&watchdog>,"status"; -+ random = <&random>,"status"; -+ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; -+ sd_force_pio = <&sdhost>,"brcm,force-pio?"; -+ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; -+ sd_debug = <&sdhost>,"brcm,debug"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2710.dtsi -@@ -0,0 +1,155 @@ -+#include "bcm283x.dtsi" -+#include "bcm270x.dtsi" -+#include "bcm2708-rpi.dtsi" -+ -+/ { -+ compatible = "brcm,bcm2837", "brcm,bcm2836"; -+ model = "BCM2837"; -+ -+ soc { -+ ranges = <0x7e000000 0x3f000000 0x01000000>, -+ <0x40000000 0x40000000 0x00040000>; -+ dma-ranges = <0xc0000000 0x00000000 0x3f000000>; -+ -+ local_intc: local_intc { -+ compatible = "brcm,bcm2836-l1-intc"; -+ reg = <0x40000000 0x100>; -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ interrupt-parent = <&local_intc>; -+ }; -+ -+ arm-pmu { -+#ifdef RPI364 -+ compatible = "arm,armv8-pmuv3", "arm,cortex-a7-pmu"; -+#else -+ compatible = "arm,cortex-a7-pmu"; -+#endif -+ interrupt-parent = <&local_intc>; -+ interrupts = <9>; -+ }; -+ -+ timer { -+#ifdef RPI364 -+ compatible = "arm,armv8-timer", "arm,armv7-timer"; -+#else -+ compatible = "arm,armv7-timer"; -+#endif -+ interrupt-parent = <&local_intc>; -+ interrupts = <0>, // PHYS_SECURE_PPI -+ <1>, // PHYS_NONSECURE_PPI -+ <3>, // VIRT_PPI -+ <2>; // HYP_PPI -+ always-on; -+ }; -+ -+ syscon@40000000 { -+ compatible = "brcm,bcm2836-arm-local", "syscon"; -+ reg = <0x40000000 0x100>; -+ }; -+ }; -+ -+#ifdef RPI364 -+ cpus: cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ v8_cpu0: cpu@0 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a53", "arm,armv8"; -+ reg = <0x0>; -+ clock-frequency = <1200000000>; -+ }; -+ -+ v8_cpu1: cpu@1 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a53", "arm,armv8"; -+ reg = <0x1>; -+ clock-frequency = <1200000000>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0x000000e0>; -+ }; -+ -+ v8_cpu2: cpu@2 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a53", "arm,armv8"; -+ reg = <0x2>; -+ clock-frequency = <1200000000>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0x000000e8>; -+ }; -+ -+ v8_cpu3: cpu@3 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a53", "arm,armv8"; -+ reg = <0x3>; -+ clock-frequency = <1200000000>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0x000000f0>; -+ }; -+ }; -+ -+ __overrides__ { -+ arm_freq = <&v8_cpu0>, "clock-frequency:0", -+ <&v8_cpu1>, "clock-frequency:0", -+ <&v8_cpu2>, "clock-frequency:0", -+ <&v8_cpu3>, "clock-frequency:0"; -+ }; -+ -+#else -+ cpus: cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ v7_cpu0: cpu@0 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a7"; -+ reg = <0x000>; -+ clock-frequency = <800000000>; -+ }; -+ -+ v7_cpu1: cpu@1 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a7"; -+ reg = <0x001>; -+ clock-frequency = <800000000>; -+ }; -+ -+ v7_cpu2: cpu@2 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a7"; -+ reg = <0x002>; -+ clock-frequency = <800000000>; -+ }; -+ -+ v7_cpu3: cpu@3 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a7"; -+ reg = <0x003>; -+ clock-frequency = <800000000>; -+ }; -+ }; -+ -+ __overrides__ { -+ arm_freq = <&v7_cpu0>, "clock-frequency:0", -+ <&v7_cpu1>, "clock-frequency:0", -+ <&v7_cpu2>, "clock-frequency:0", -+ <&v7_cpu3>, "clock-frequency:0"; -+ }; -+#endif -+}; -+ -+&intc { -+ compatible = "brcm,bcm2836-armctrl-ic"; -+ reg = <0x7e00b200 0x200>; -+ interrupt-parent = <&local_intc>; -+ interrupts = <8>; -+}; -+ -+#ifdef RPI364 -+&usb { -+ compatible = "brcm,bcm2835-usb"; -+ reg = <0x7e980000 0x10000>; -+ interrupts = <1 9>; -+}; -+#endif ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -0,0 +1,105 @@ -+# Overlays for the Raspberry Pi platform -+ -+dtbo-$(CONFIG_ARCH_BCM2835) += \ -+ adau1977-adc.dtbo \ -+ ads1015.dtbo \ -+ ads7846.dtbo \ -+ akkordion-iqdacplus.dtbo \ -+ allo-piano-dac-pcm512x-audio.dtbo \ -+ at86rf233.dtbo \ -+ audioinjector-wm8731-audio.dtbo \ -+ audremap.dtbo \ -+ bmp085_i2c-sensor.dtbo \ -+ dht11.dtbo \ -+ dionaudio-loco.dtbo \ -+ dpi18.dtbo \ -+ dpi24.dtbo \ -+ dwc-otg.dtbo \ -+ dwc2.dtbo \ -+ enc28j60.dtbo \ -+ enc28j60-spi2.dtbo \ -+ gpio-ir.dtbo \ -+ gpio-poweroff.dtbo \ -+ hifiberry-amp.dtbo \ -+ hifiberry-dac.dtbo \ -+ hifiberry-dacplus.dtbo \ -+ hifiberry-digi.dtbo \ -+ hifiberry-digi-pro.dtbo \ -+ hy28a.dtbo \ -+ hy28b.dtbo \ -+ i2c-bcm2708.dtbo \ -+ i2c-gpio.dtbo \ -+ i2c-mux.dtbo \ -+ i2c-pwm-pca9685a.dtbo \ -+ i2c-rtc.dtbo \ -+ i2c-sensor.dtbo \ -+ i2c0-bcm2708.dtbo \ -+ i2c1-bcm2708.dtbo \ -+ i2s-gpio28-31.dtbo \ -+ iqaudio-dac.dtbo \ -+ iqaudio-dacplus.dtbo \ -+ iqaudio-digi-wm8804-audio.dtbo \ -+ justboom-dac.dtbo \ -+ justboom-digi.dtbo \ -+ lirc-rpi.dtbo \ -+ mcp23017.dtbo \ -+ mcp23s17.dtbo \ -+ mcp2515-can0.dtbo \ -+ mcp2515-can1.dtbo \ -+ midi-uart0.dtbo \ -+ mmc.dtbo \ -+ mz61581.dtbo \ -+ pi3-act-led.dtbo \ -+ pi3-disable-bt.dtbo \ -+ pi3-miniuart-bt.dtbo \ -+ piscreen.dtbo \ -+ piscreen2r.dtbo \ -+ pisound.dtbo \ -+ pitft22.dtbo \ -+ pitft28-capacitive.dtbo \ -+ pitft28-resistive.dtbo \ -+ pitft35-resistive.dtbo \ -+ pps-gpio.dtbo \ -+ pwm.dtbo \ -+ pwm-2chan.dtbo \ -+ qca7000.dtbo \ -+ raspidac3.dtbo \ -+ rpi-backlight.dtbo \ -+ rpi-dac.dtbo \ -+ rpi-display.dtbo \ -+ rpi-ft5406.dtbo \ -+ rpi-proto.dtbo \ -+ rpi-sense.dtbo \ -+ rra-digidac1-wm8741-audio.dtbo \ -+ sc16is750-i2c.dtbo \ -+ sc16is752-spi1.dtbo \ -+ sdhost.dtbo \ -+ sdio.dtbo \ -+ sdio-1bit.dtbo \ -+ sdtweak.dtbo \ -+ smi.dtbo \ -+ smi-dev.dtbo \ -+ smi-nand.dtbo \ -+ spi-gpio35-39.dtbo \ -+ spi-rtc.dtbo \ -+ spi0-hw-cs.dtbo \ -+ spi1-1cs.dtbo \ -+ spi1-2cs.dtbo \ -+ spi1-3cs.dtbo \ -+ spi2-1cs.dtbo \ -+ spi2-2cs.dtbo \ -+ spi2-3cs.dtbo \ -+ tinylcd35.dtbo \ -+ uart1.dtbo \ -+ vc4-fkms-v3d.dtbo \ -+ vc4-kms-v3d.dtbo \ -+ vga666.dtbo \ -+ w1-gpio.dtbo \ -+ w1-gpio-pullup.dtbo \ -+ wittypi.dtbo -+ -+targets += dtbs dtbs_install -+targets += $(dtbo-y) -+ -+always := $(dtbo-y) -+clean-files := *.dtbo ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/README -@@ -0,0 +1,1368 @@ -+Introduction -+============ -+ -+This directory contains Device Tree overlays. Device Tree makes it possible -+to support many hardware configurations with a single kernel and without the -+need to explicitly load or blacklist kernel modules. Note that this isn't a -+"pure" Device Tree configuration (c.f. MACH_BCM2835) - some on-board devices -+are still configured by the board support code, but the intention is to -+eventually reach that goal. -+ -+On Raspberry Pi, Device Tree usage is controlled from /boot/config.txt. By -+default, the Raspberry Pi kernel boots with device tree enabled. You can -+completely disable DT usage (for now) by adding: -+ -+ device_tree= -+ -+to your config.txt, which should cause your Pi to revert to the old way of -+doing things after a reboot. -+ -+In /boot you will find a .dtb for each base platform. This describes the -+hardware that is part of the Raspberry Pi board. The loader (start.elf and its -+siblings) selects the .dtb file appropriate for the platform by name, and reads -+it into memory. At this point, all of the optional interfaces (i2c, i2s, spi) -+are disabled, but they can be enabled using Device Tree parameters: -+ -+ dtparam=i2c=on,i2s=on,spi=on -+ -+However, this shouldn't be necessary in many use cases because loading an -+overlay that requires one of those interfaces will cause it to be enabled -+automatically, and it is advisable to only enable interfaces if they are -+needed. -+ -+Configuring additional, optional hardware is done using Device Tree overlays -+(see below). -+ -+raspi-config -+============ -+ -+The Advanced Options section of the raspi-config utility can enable and disable -+Device Tree use, as well as toggling the I2C and SPI interfaces. Note that it -+is possible to both enable an interface and blacklist the driver, if for some -+reason you should want to defer the loading. -+ -+Modules -+======= -+ -+As well as describing the hardware, Device Tree also gives enough information -+to allow suitable driver modules to be located and loaded, with the corollary -+that unneeded modules are not loaded. As a result it should be possible to -+remove lines from /etc/modules, and /etc/modprobe.d/raspi-blacklist.conf can -+have its contents deleted (or commented out). -+ -+Using Overlays -+============== -+ -+Overlays are loaded using the "dtoverlay" directive. As an example, consider -+the popular lirc-rpi module, the Linux Infrared Remote Control driver. In the -+pre-DT world this would be loaded from /etc/modules, with an explicit -+"modprobe lirc-rpi" command, or programmatically by lircd. With DT enabled, -+this becomes a line in config.txt: -+ -+ dtoverlay=lirc-rpi -+ -+This causes the file /boot/overlays/lirc-rpi.dtbo to be loaded. By -+default it will use GPIOs 17 (out) and 18 (in), but this can be modified using -+DT parameters: -+ -+ dtoverlay=lirc-rpi,gpio_out_pin=17,gpio_in_pin=13 -+ -+Parameters always have default values, although in some cases (e.g. "w1-gpio") -+it is necessary to provided multiple overlays in order to get the desired -+behaviour. See the list of overlays below for a description of the parameters -+and their defaults. -+ -+The Overlay and Parameter Reference -+=================================== -+ -+N.B. When editing this file, please preserve the indentation levels to make it -+simple to parse programmatically. NO HARD TABS. -+ -+ -+Name: -+Info: Configures the base Raspberry Pi hardware -+Load: -+Params: -+ audio Set to "on" to enable the onboard ALSA audio -+ interface (default "off") -+ -+ i2c_arm Set to "on" to enable the ARM's i2c interface -+ (default "off") -+ -+ i2c_vc Set to "on" to enable the i2c interface -+ usually reserved for the VideoCore processor -+ (default "off") -+ -+ i2c An alias for i2c_arm -+ -+ i2c_arm_baudrate Set the baudrate of the ARM's i2c interface -+ (default "100000") -+ -+ i2c_vc_baudrate Set the baudrate of the VideoCore i2c interface -+ (default "100000") -+ -+ i2c_baudrate An alias for i2c_arm_baudrate -+ -+ i2s Set to "on" to enable the i2s interface -+ (default "off") -+ -+ spi Set to "on" to enable the spi interfaces -+ (default "off") -+ -+ random Set to "on" to enable the hardware random -+ number generator (default "on") -+ -+ sd_overclock Clock (in MHz) to use when the MMC framework -+ requests 50MHz -+ -+ sd_force_pio Disable DMA support for SD driver (default off) -+ -+ sd_pio_limit Number of blocks above which to use DMA for -+ SD card (default 1) -+ -+ sd_debug Enable debug output from SD driver (default off) -+ -+ uart0 Set to "off" to disable uart0 (default "on") -+ -+ uart1 Set to "on" or "off" to enable or disable uart1 -+ (default varies) -+ -+ watchdog Set to "on" to enable the hardware watchdog -+ (default "off") -+ -+ act_led_trigger Choose which activity the LED tracks. -+ Use "heartbeat" for a nice load indicator. -+ (default "mmc") -+ -+ act_led_activelow Set to "on" to invert the sense of the LED -+ (default "off") -+ N.B. For Pi3 see pi3-act-led overlay. -+ -+ act_led_gpio Set which GPIO to use for the activity LED -+ (in case you want to connect it to an external -+ device) -+ (default "16" on a non-Plus board, "47" on a -+ Plus or Pi 2) -+ N.B. For Pi3 see pi3-act-led overlay. -+ -+ pwr_led_trigger -+ pwr_led_activelow -+ pwr_led_gpio -+ As for act_led_*, but using the PWR LED. -+ Not available on Model A/B boards. -+ -+ N.B. It is recommended to only enable those interfaces that are needed. -+ Leaving all interfaces enabled can lead to unwanted behaviour (i2c_vc -+ interfering with Pi Camera, I2S and SPI hogging GPIO pins, etc.) -+ Note also that i2c, i2c_arm and i2c_vc are aliases for the physical -+ interfaces i2c0 and i2c1. Use of the numeric variants is still possible -+ but deprecated because the ARM/VC assignments differ between board -+ revisions. The same board-specific mapping applies to i2c_baudrate, -+ and the other i2c baudrate parameters. -+ -+ -+Name: adau1977-adc -+Info: Overlay for activation of ADAU1977 ADC codec over I2C for control -+ and I2S for data. -+Load: dtoverlay=adau1977-adc -+Params: -+ -+ -+Name: ads1015 -+Info: Overlay for activation of Texas Instruments ADS1015 ADC over I2C -+Load: dtoverlay=ads1015,= -+Params: addr I2C bus address of device. Set based on how the -+ addr pin is wired. (default=0x48 assumes addr -+ is pulled to GND) -+ cha_enable Enable virtual channel a. (default=true) -+ cha_cfg Set the configuration for virtual channel a. -+ (default=4 configures this channel for the -+ voltage at A0 with respect to GND) -+ cha_datarate Set the datarate (samples/sec) for this channel. -+ (default=4 sets 1600 sps) -+ cha_gain Set the gain of the Programmable Gain -+ Amplifier for this channel. (default=2 sets the -+ full scale of the channel to 2.048 Volts) -+ -+ Channel (ch) parameters can be set for each enabled channel. -+ A maximum of 4 channels can be enabled (letters a thru d). -+ For more information refer to the device datasheet at: -+ http://www.ti.com/lit/ds/symlink/ads1015.pdf -+ -+ -+Name: ads7846 -+Info: ADS7846 Touch controller -+Load: dtoverlay=ads7846,= -+Params: cs SPI bus Chip Select (default 1) -+ speed SPI bus speed (default 2MHz, max 3.25MHz) -+ penirq GPIO used for PENIRQ. REQUIRED -+ penirq_pull Set GPIO pull (default 0=none, 2=pullup) -+ swapxy Swap x and y axis -+ xmin Minimum value on the X axis (default 0) -+ ymin Minimum value on the Y axis (default 0) -+ xmax Maximum value on the X axis (default 4095) -+ ymax Maximum value on the Y axis (default 4095) -+ pmin Minimum reported pressure value (default 0) -+ pmax Maximum reported pressure value (default 65535) -+ xohms Touchpanel sensitivity (X-plate resistance) -+ (default 400) -+ -+ penirq is required and usually xohms (60-100) has to be set as well. -+ Apart from that, pmax (255) and swapxy are also common. -+ The rest of the calibration can be done with xinput-calibrator. -+ See: github.com/notro/fbtft/wiki/FBTFT-on-Raspian -+ Device Tree binding document: -+ www.kernel.org/doc/Documentation/devicetree/bindings/input/ads7846.txt -+ -+ -+Name: akkordion-iqdacplus -+Info: Configures the Digital Dreamtime Akkordion Music Player (based on the -+ OEM IQAudIO DAC+ or DAC Zero module). -+Load: dtoverlay=akkordion-iqdacplus,= -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. Enable with -+ dtoverlay=akkordion-iqdacplus,24db_digital_gain -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24db_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ -+ -+Name: allo-piano-dac-pcm512x-audio -+Info: Configures the Allo Piano DAC (2.0/2.1) audio cards. -+ (NB. This initial support is for 2.0 channel audio ONLY! ie. stereo. -+ The subwoofer outputs on the Piano 2.1 are not currently supported!) -+Load: dtoverlay=allo-piano-dac-pcm512x-audio, -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24db_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ -+ -+Name: at86rf233 -+Info: Configures the Atmel AT86RF233 802.15.4 low-power WPAN transceiver, -+ connected to spi0.0 -+Load: dtoverlay=at86rf233,= -+Params: interrupt GPIO used for INT (default 23) -+ reset GPIO used for Reset (default 24) -+ sleep GPIO used for Sleep (default 25) -+ speed SPI bus speed in Hz (default 3000000) -+ trim Fine tuning of the internal capacitance -+ arrays (0=+0pF, 15=+4.5pF, default 15) -+ -+ -+Name: audioinjector-wm8731-audio -+Info: Configures the audioinjector.net audio add on soundcard -+Load: dtoverlay=audioinjector-wm8731-audio -+Params: -+ -+ -+Name: audremap -+Info: Switches PWM sound output to pins 12 (Right) & 13 (Left) -+Load: dtoverlay=audremap,= -+Params: swap_lr Reverse the channel allocation, which will also -+ swap the audio jack outputs (default off) -+ enable_jack Don't switch off the audio jack output -+ (default off) -+ -+ -+Name: bmp085_i2c-sensor -+Info: This overlay is now deprecated - see i2c-sensor -+Load: dtoverlay=bmp085_i2c-sensor -+Params: -+ -+ -+Name: dht11 -+Info: Overlay for the DHT11/DHT21/DHT22 humidity/temperature sensors -+ Also sometimes found with the part number(s) AM230x. -+Load: dtoverlay=dht11,= -+Params: gpiopin GPIO connected to the sensor's DATA output. -+ (default 4) -+ -+ -+Name: dionaudio-loco -+Info: Configures the Dion Audio LOCO DAC-AMP -+Load: dtoverlay=dionaudio-loco -+Params: -+ -+ -+Name: dpi18 -+Info: Overlay for a generic 18-bit DPI display -+ This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output -+ 2-3 seconds after the kernel has started. -+Load: dtoverlay=dpi18 -+Params: -+ -+ -+Name: dpi24 -+Info: Overlay for a generic 24-bit DPI display -+ This uses GPIOs 0-27 (so no I2C, uart etc.), and activates the output -+ 2-3 seconds after the kernel has started. -+Load: dtoverlay=dpi24 -+Params: -+ -+ -+Name: dwc-otg -+Info: Selects the dwc_otg USB controller driver which has fiq support. This -+ is the default on all except the Pi Zero which defaults to dwc2. -+Load: dtoverlay=dwc-otg -+Params: -+ -+ -+Name: dwc2 -+Info: Selects the dwc2 USB controller driver -+Load: dtoverlay=dwc2,= -+Params: dr_mode Dual role mode: "host", "peripheral" or "otg" -+ -+ g-rx-fifo-size Size of rx fifo size in gadget mode -+ -+ g-np-tx-fifo-size Size of non-periodic tx fifo size in gadget -+ mode -+ -+ g-tx-fifo-size Size of periodic tx fifo per endpoint -+ (except ep0) in gadget mode -+ -+ -+[ The ds1307-rtc overlay has been deleted. See i2c-rtc. ] -+ -+ -+Name: enc28j60 -+Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI0 -+Load: dtoverlay=enc28j60,= -+Params: int_pin GPIO used for INT (default 25) -+ -+ speed SPI bus speed (default 12000000) -+ -+ -+Name: enc28j60-spi2 -+Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI2 -+Load: dtoverlay=enc28j60-spi2,= -+Params: int_pin GPIO used for INT (default 39) -+ -+ speed SPI bus speed (default 12000000) -+ -+ -+Name: gpio-ir -+Info: Use GPIO pin as rc-core style infrared receiver input. The rc-core- -+ based gpio_ir_recv driver maps received keys directly to a -+ /dev/input/event* device, all decoding is done by the kernel - LIRC is -+ not required! The key mapping and other decoding parameters can be -+ configured by "ir-keytable" tool. -+Load: dtoverlay=gpio-ir,= -+Params: gpio_pin Input pin number. Default is 18. -+ -+ gpio_pull Desired pull-up/down state (off, down, up) -+ Default is "down". -+ -+ rc-map-name Default rc keymap (can also be changed by -+ ir-keytable), defaults to "rc-rc6-mce" -+ -+ -+Name: gpio-poweroff -+Info: Drives a GPIO high or low on poweroff (including halt) -+Load: dtoverlay=gpio-poweroff,= -+Params: gpiopin GPIO for signalling (default 26) -+ -+ active_low Set if the power control device requires a -+ high->low transition to trigger a power-down. -+ Note that this will require the support of a -+ custom dt-blob.bin to prevent a power-down -+ during the boot process, and that a reboot -+ will also cause the pin to go low. -+ -+ -+Name: hifiberry-amp -+Info: Configures the HifiBerry Amp and Amp+ audio cards -+Load: dtoverlay=hifiberry-amp -+Params: -+ -+ -+Name: hifiberry-dac -+Info: Configures the HifiBerry DAC audio card -+Load: dtoverlay=hifiberry-dac -+Params: -+ -+ -+Name: hifiberry-dacplus -+Info: Configures the HifiBerry DAC+ audio card -+Load: dtoverlay=hifiberry-dacplus,= -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. Enable with -+ "dtoverlay=hifiberry-dacplus,24db_digital_gain" -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24dB_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ slave Force DAC+ Pro into slave mode, using Pi as -+ master for bit clock and frame clock. -+ -+ -+Name: hifiberry-digi -+Info: Configures the HifiBerry Digi and Digi+ audio card -+Load: dtoverlay=hifiberry-digi -+Params: -+ -+ -+Name: hifiberry-digi-pro -+Info: Configures the HifiBerry Digi+ Pro audio card -+Load: dtoverlay=hifiberry-digi-pro -+Params: -+ -+ -+Name: hy28a -+Info: HY28A - 2.8" TFT LCD Display Module by HAOYU Electronics -+ Default values match Texy's display shield -+Load: dtoverlay=hy28a,= -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ xohms Touchpanel sensitivity (X-plate resistance) -+ -+ resetgpio GPIO used to reset controller -+ -+ ledgpio GPIO used to control backlight -+ -+ -+Name: hy28b -+Info: HY28B - 2.8" TFT LCD Display Module by HAOYU Electronics -+ Default values match Texy's display shield -+Load: dtoverlay=hy28b,= -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ xohms Touchpanel sensitivity (X-plate resistance) -+ -+ resetgpio GPIO used to reset controller -+ -+ ledgpio GPIO used to control backlight -+ -+ -+Name: i2c-bcm2708 -+Info: Fall back to the i2c_bcm2708 driver for the i2c_arm bus. -+Load: dtoverlay=i2c-bcm2708 -+Params: -+ -+ -+Name: i2c-gpio -+Info: Adds support for software i2c controller on gpio pins -+Load: dtoverlay=i2c-gpio,= -+Params: i2c_gpio_sda GPIO used for I2C data (default "23") -+ -+ i2c_gpio_scl GPIO used for I2C clock (default "24") -+ -+ i2c_gpio_delay_us Clock delay in microseconds -+ (default "2" = ~100kHz) -+ -+ -+Name: i2c-mux -+Info: Adds support for a number of I2C bus multiplexers on i2c_arm -+Load: dtoverlay=i2c-mux,= -+Params: pca9542 Select the NXP PCA9542 device -+ -+ pca9545 Select the NXP PCA9545 device -+ -+ pca9548 Select the NXP PCA9548 device -+ -+ addr Change I2C address of the device (default 0x70) -+ -+ -+[ The i2c-mux-pca9548a overlay has been deleted. See i2c-mux. ] -+ -+ -+Name: i2c-pwm-pca9685a -+Info: Adds support for an NXP PCA9685A I2C PWM controller on i2c_arm -+Load: dtoverlay=i2c-pwm-pca9685a,= -+Params: addr I2C address of PCA9685A (default 0x40) -+ -+ -+Name: i2c-rtc -+Info: Adds support for a number of I2C Real Time Clock devices -+Load: dtoverlay=i2c-rtc,= -+Params: abx80x Select one of the ABx80x family: -+ AB0801, AB0803, AB0804, AB0805, -+ AB1801, AB1803, AB1804, AB1805 -+ -+ ds1307 Select the DS1307 device -+ -+ ds1339 Select the DS1339 device -+ -+ ds3231 Select the DS3231 device -+ -+ mcp7940x Select the MCP7940x device -+ -+ mcp7941x Select the MCP7941x device -+ -+ pcf2127 Select the PCF2127 device -+ -+ pcf8523 Select the PCF8523 device -+ -+ pcf8563 Select the PCF8563 device -+ -+ trickle-diode-type Diode type for trickle charge - "standard" or -+ "schottky" (ABx80x only) -+ -+ trickle-resistor-ohms Resistor value for trickle charge (DS1339, -+ ABx80x) -+ -+ wakeup-source Specify that the RTC can be used as a wakeup -+ source -+ -+ -+Name: i2c-sensor -+Info: Adds support for a number of I2C barometric pressure and temperature -+ sensors on i2c_arm -+Load: dtoverlay=i2c-sensor,= -+Params: bmp085 Select the Bosch sensortronic BMP085 -+ -+ bmp280 Select the Bosch sensortronic BMP280 -+ -+ -+Name: i2c0-bcm2708 -+Info: Enable the i2c_bcm2708 driver for the i2c0 bus. Not all pin combinations -+ are usable on all platforms. -+Load: dtoverlay=i2c0-bcm2708,= -+Params: sda0_pin GPIO pin for SDA0 (deprecated - use pins_*) -+ scl0_pin GPIO pin for SCL0 (deprecated - use pins_*) -+ pins_0_1 Use pins 0 and 1 (default) -+ pins_28_29 Use pins 28 and 29 -+ pins_44_45 Use pins 44 and 45 -+ pins_46_47 Use pins 46 and 47 -+ -+ -+Name: i2c1-bcm2708 -+Info: Enable the i2c_bcm2708 driver for the i2c1 bus -+Load: dtoverlay=i2c1-bcm2708,= -+Params: sda1_pin GPIO pin for SDA1 (2 or 44 - default 2) -+ scl1_pin GPIO pin for SCL1 (3 or 45 - default 3) -+ pin_func Alternative pin function (4 (alt0), 6 (alt2) - -+ default 4) -+ -+ -+Name: i2s-gpio28-31 -+Info: move I2S function block to GPIO 28 to 31 -+Load: dtoverlay=i2s-gpio28-31 -+Params: -+ -+ -+Name: iqaudio-dac -+Info: Configures the IQaudio DAC audio card -+Load: dtoverlay=iqaudio-dac, -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. Enable with -+ "dtoverlay=iqaudio-dac,24db_digital_gain" -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24db_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ -+ -+Name: iqaudio-dacplus -+Info: Configures the IQaudio DAC+ audio card -+Load: dtoverlay=iqaudio-dacplus,= -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. Enable with -+ "dtoverlay=iqaudio-dacplus,24db_digital_gain" -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24db_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ auto_mute_amp If specified, unmute/mute the IQaudIO amp when -+ starting/stopping audio playback. -+ unmute_amp If specified, unmute the IQaudIO amp once when -+ the DAC driver module loads. -+ -+ -+Name: iqaudio-digi-wm8804-audio -+Info: Configures the IQAudIO Digi WM8804 audio card -+Load: dtoverlay=iqaudio-digi-wm8804-audio,= -+Params: card_name Override the default, "IQAudIODigi", card name. -+ dai_name Override the default, "IQAudIO Digi", dai name. -+ dai_stream_name Override the default, "IQAudIO Digi HiFi", -+ dai stream name. -+ -+ -+Name: justboom-dac -+Info: Configures the JustBoom DAC HAT, Amp HAT, DAC Zero and Amp Zero audio -+ cards -+Load: dtoverlay=justboom-dac,= -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. Enable with -+ "dtoverlay=justboom-dac,24db_digital_gain" -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24dB_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ -+ -+Name: justboom-digi -+Info: Configures the JustBoom Digi HAT and Digi Zero audio cards -+Load: dtoverlay=justboom-digi -+Params: -+ -+ -+Name: lirc-rpi -+Info: Configures lirc-rpi (Linux Infrared Remote Control for Raspberry Pi) -+ Consult the module documentation for more details. -+Load: dtoverlay=lirc-rpi,= -+Params: gpio_out_pin GPIO for output (default "17") -+ -+ gpio_in_pin GPIO for input (default "18") -+ -+ gpio_in_pull Pull up/down/off on the input pin -+ (default "down") -+ -+ sense Override the IR receive auto-detection logic: -+ "0" = force active-high -+ "1" = force active-low -+ "-1" = use auto-detection -+ (default "-1") -+ -+ softcarrier Turn the software carrier "on" or "off" -+ (default "on") -+ -+ invert "on" = invert the output pin (default "off") -+ -+ debug "on" = enable additional debug messages -+ (default "off") -+ -+ -+Name: mcp23017 -+Info: Configures the MCP23017 I2C GPIO expander -+Load: dtoverlay=mcp23017,= -+Params: gpiopin Gpio pin connected to the INTA output of the -+ MCP23017 (default: 4) -+ -+ addr I2C address of the MCP23017 (default: 0x20) -+ -+ -+Name: mcp23s17 -+Info: Configures the MCP23S08/17 SPI GPIO expanders. -+ If devices are present on SPI1 or SPI2, those interfaces must be enabled -+ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. -+ If interrupts are enabled for a device on a given CS# on a SPI bus, that -+ device must be the only one present on that SPI bus/CS#. -+Load: dtoverlay=mcp23s17,= -+Params: s08-spi--present 4-bit integer, bitmap indicating MCP23S08 -+ devices present on SPI, CS# -+ -+ s17-spi--present 8-bit integer, bitmap indicating MCP23S17 -+ devices present on SPI, CS# -+ -+ s08-spi--int-gpio integer, enables interrupts on a single -+ MCP23S08 device on SPI, CS#, specifies -+ the GPIO pin to which INT output of MCP23S08 -+ is connected. -+ -+ s17-spi--int-gpio integer, enables mirrored interrupts on a -+ single MCP23S17 device on SPI, CS#, -+ specifies the GPIO pin to which either INTA -+ or INTB output of MCP23S17 is connected. -+ -+ -+Name: mcp2515-can0 -+Info: Configures the MCP2515 CAN controller on spi0.0 -+Load: dtoverlay=mcp2515-can0,= -+Params: oscillator Clock frequency for the CAN controller (Hz) -+ -+ spimaxfrequency Maximum SPI frequence (Hz) -+ -+ interrupt GPIO for interrupt signal -+ -+ -+Name: mcp2515-can1 -+Info: Configures the MCP2515 CAN controller on spi0.1 -+Load: dtoverlay=mcp2515-can1,= -+Params: oscillator Clock frequency for the CAN controller (Hz) -+ -+ spimaxfrequency Maximum SPI frequence (Hz) -+ -+ interrupt GPIO for interrupt signal -+ -+ -+Name: midi-uart0 -+Info: Configures UART0 (ttyAMA0) so that a requested 38.4kbaud actually gets -+ 31.25kbaud, the frequency required for MIDI -+Load: dtoverlay=midi-uart0 -+Params: -+ -+ -+Name: mmc -+Info: Selects the bcm2835-mmc SD/MMC driver, optionally with overclock -+Load: dtoverlay=mmc,= -+Params: overclock_50 Clock (in MHz) to use when the MMC framework -+ requests 50MHz -+ -+ -+Name: mz61581 -+Info: MZ61581 display by Tontec -+Load: dtoverlay=mz61581,= -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ txbuflen Transmit buffer length (default 32768) -+ -+ debug Debug output level {0-7} -+ -+ xohms Touchpanel sensitivity (X-plate resistance) -+ -+ -+[ The pcf2127-rtc overlay has been deleted. See i2c-rtc. ] -+ -+ -+[ The pcf8523-rtc overlay has been deleted. See i2c-rtc. ] -+ -+ -+[ The pcf8563-rtc overlay has been deleted. See i2c-rtc. ] -+ -+ -+Name: pi3-act-led -+Info: Pi3 uses a GPIO expander to drive the LEDs which can only be accessed -+ from the VPU. There is a special driver for this with a separate DT -+ node, which has the unfortunate consequence of breaking the -+ act_led_gpio and act_led_activelow dtparams. -+ This overlay changes the GPIO controller back to the standard one and -+ restores the dtparams. -+Load: dtoverlay=pi3-act-led,= -+Params: activelow Set to "on" to invert the sense of the LED -+ (default "off") -+ -+ gpio Set which GPIO to use for the activity LED -+ (in case you want to connect it to an external -+ device) -+ REQUIRED -+ -+ -+Name: pi3-disable-bt -+Info: Disable Pi3 Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15 -+ N.B. To disable the systemd service that initialises the modem so it -+ doesn't use the UART, use 'sudo systemctl disable hciuart'. -+Load: dtoverlay=pi3-disable-bt -+Params: -+ -+ -+Name: pi3-miniuart-bt -+Info: Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore -+ UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum -+ usable baudrate. -+ N.B. It is also necessary to edit /lib/systemd/system/hciuart.service -+ and replace ttyAMA0 with ttyS0, unless you have a system with udev rules -+ that create /dev/serial0 and /dev/serial1, in which case use -+ /dev/serial1 instead because it will always be correct. Furthermore, -+ you must also set core_freq=250 in config.txt or the miniuart will not -+ work. -+Load: dtoverlay=pi3-miniuart-bt -+Params: -+ -+ -+Name: piscreen -+Info: PiScreen display by OzzMaker.com -+Load: dtoverlay=piscreen,= -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ xohms Touchpanel sensitivity (X-plate resistance) -+ -+ -+Name: piscreen2r -+Info: PiScreen 2 with resistive TP display by OzzMaker.com -+Load: dtoverlay=piscreen2r,= -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ xohms Touchpanel sensitivity (X-plate resistance) -+ -+ -+Name: pisound -+Info: Configures the Blokas Labs pisound card -+Load: dtoverlay=pisound -+Params: -+ -+ -+Name: pitft22 -+Info: Adafruit PiTFT 2.2" screen -+Load: dtoverlay=pitft22,= -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ -+Name: pitft28-capacitive -+Info: Adafruit PiTFT 2.8" capacitive touch screen -+Load: dtoverlay=pitft28-capacitive,= -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ touch-sizex Touchscreen size x (default 240) -+ -+ touch-sizey Touchscreen size y (default 320) -+ -+ touch-invx Touchscreen inverted x axis -+ -+ touch-invy Touchscreen inverted y axis -+ -+ touch-swapxy Touchscreen swapped x y axis -+ -+ -+Name: pitft28-resistive -+Info: Adafruit PiTFT 2.8" resistive touch screen -+Load: dtoverlay=pitft28-resistive,= -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ -+Name: pitft35-resistive -+Info: Adafruit PiTFT 3.5" resistive touch screen -+Load: dtoverlay=pitft35-resistive,= -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ -+Name: pps-gpio -+Info: Configures the pps-gpio (pulse-per-second time signal via GPIO). -+Load: dtoverlay=pps-gpio,= -+Params: gpiopin Input GPIO (default "18") -+ assert_falling_edge When present, assert is indicated by a falling -+ edge, rather than by a rising edge -+ -+ -+Name: pwm -+Info: Configures a single PWM channel -+ Legal pin,function combinations for each channel: -+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) -+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) -+ N.B.: -+ 1) Pin 18 is the only one available on all platforms, and -+ it is the one used by the I2S audio interface. -+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. -+ 2) The onboard analogue audio output uses both PWM channels. -+ 3) So be careful mixing audio and PWM. -+ 4) Currently the clock must have been enabled and configured -+ by other means. -+Load: dtoverlay=pwm,= -+Params: pin Output pin (default 18) - see table -+ func Pin function (default 2 = Alt5) - see above -+ clock PWM clock frequency (informational) -+ -+ -+Name: pwm-2chan -+Info: Configures both PWM channels -+ Legal pin,function combinations for each channel: -+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) -+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) -+ N.B.: -+ 1) Pin 18 is the only one available on all platforms, and -+ it is the one used by the I2S audio interface. -+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. -+ 2) The onboard analogue audio output uses both PWM channels. -+ 3) So be careful mixing audio and PWM. -+ 4) Currently the clock must have been enabled and configured -+ by other means. -+Load: dtoverlay=pwm-2chan,= -+Params: pin Output pin (default 18) - see table -+ pin2 Output pin for other channel (default 19) -+ func Pin function (default 2 = Alt5) - see above -+ func2 Function for pin2 (default 2 = Alt5) -+ clock PWM clock frequency (informational) -+ -+ -+Name: qca7000 -+Info: I2SE's Evaluation Board for PLC Stamp micro -+Load: dtoverlay=qca7000,= -+Params: int_pin GPIO pin for interrupt signal (default 23) -+ -+ speed SPI bus speed (default 12 MHz) -+ -+ -+Name: raspidac3 -+Info: Configures the RaspiDAV Rev.3x audio card -+Load: dtoverlay=raspidac3 -+Params: -+ -+ -+Name: rpi-backlight -+Info: Raspberry Pi official display backlight driver -+Load: dtoverlay=rpi-backlight -+Params: -+ -+ -+Name: rpi-dac -+Info: Configures the RPi DAC audio card -+Load: dtoverlay=rpi-dac -+Params: -+ -+ -+Name: rpi-display -+Info: RPi-Display - 2.8" Touch Display by Watterott -+Load: dtoverlay=rpi-display,= -+Params: speed Display SPI bus speed -+ rotate Display rotation {0,90,180,270} -+ fps Delay between frame updates -+ debug Debug output level {0-7} -+ xohms Touchpanel sensitivity (X-plate resistance) -+ swapxy Swap x and y axis -+ -+ -+Name: rpi-ft5406 -+Info: Official Raspberry Pi display touchscreen -+Load: dtoverlay=rpi-ft5406 -+Params: -+ -+ -+Name: rpi-proto -+Info: Configures the RPi Proto audio card -+Load: dtoverlay=rpi-proto -+Params: -+ -+ -+Name: rpi-sense -+Info: Raspberry Pi Sense HAT -+Load: dtoverlay=rpi-sense -+Params: -+ -+ -+Name: rra-digidac1-wm8741-audio -+Info: Configures the Red Rocks Audio DigiDAC1 soundcard -+Load: dtoverlay=rra-digidac1-wm8741-audio -+Params: -+ -+ -+Name: sc16is750-i2c -+Info: Overlay for the NXP SC16IS750 UART with I2C Interface -+ Enables the chip on I2C1 at 0x48. To select another address, -+ please refer to table 10 in reference manual. -+ -+Load: dtoverlay=sc16is750-i2c,= -+Params: int_pin GPIO used for IRQ (default 24) -+ addr Address (default 0x48) -+ -+ -+Name: sc16is752-spi1 -+Info: Overlay for the NXP SC16IS752 Dual UART with SPI Interface -+ Enables the chip on SPI1. -+ N.B.: spi1 is only accessible on devices with a 40pin header, eg: -+ A+, B+, Zero and PI2 B; as well as the Compute Module. -+ -+Load: dtoverlay=sc16is752-spi1,= -+Params: int_pin GPIO used for IRQ (default 24) -+ -+ -+Name: sdhost -+Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock. -+ N.B. This overlay is designed for situations where the mmc driver is -+ the default, so it disables the other (mmc) interface - this will kill -+ WiFi on a Pi3. If this isn't what you want, either use the sdtweak -+ overlay or the new sd_* dtparams of the base DTBs. -+Load: dtoverlay=sdhost,= -+Params: overclock_50 Clock (in MHz) to use when the MMC framework -+ requests 50MHz -+ -+ force_pio Disable DMA support (default off) -+ -+ pio_limit Number of blocks above which to use DMA -+ (default 1) -+ -+ debug Enable debug output (default off) -+ -+ -+Name: sdio -+Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock, -+ and enables SDIO via GPIOs 22-27. -+Load: dtoverlay=sdio,= -+Params: overclock_50 SD Clock (in MHz) to use when the MMC framework -+ requests 50MHz -+ -+ sdio_overclock SDIO Clock (in MHz) to use when the MMC -+ framework requests 50MHz -+ -+ force_pio Disable DMA support (default off) -+ -+ pio_limit Number of blocks above which to use DMA -+ (default 1) -+ -+ debug Enable debug output (default off) -+ -+ poll_once Disable SDIO-device polling every second -+ (default on: polling once at boot-time) -+ -+ bus_width Set the SDIO host bus width (default 4 bits) -+ -+ -+Name: sdio-1bit -+Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock, -+ and enables 1-bit SDIO via GPIOs 22-25. -+Load: dtoverlay=sdio-1bit,= -+Params: overclock_50 SD Clock (in MHz) to use when the MMC framework -+ requests 50MHz -+ -+ sdio_overclock SDIO Clock (in MHz) to use when the MMC -+ framework requests 50MHz -+ -+ force_pio Disable DMA support (default off) -+ -+ pio_limit Number of blocks above which to use DMA -+ (default 1) -+ -+ debug Enable debug output (default off) -+ -+ poll_once Disable SDIO-device polling every second -+ (default on: polling once at boot-time) -+ -+ -+Name: sdtweak -+Info: Tunes the bcm2835-sdhost SD/MMC driver -+ N.B. This functionality is now available via the sd_* dtparams in the -+ base DTB. -+Load: dtoverlay=sdtweak,= -+Params: overclock_50 Clock (in MHz) to use when the MMC framework -+ requests 50MHz -+ -+ force_pio Disable DMA support (default off) -+ -+ pio_limit Number of blocks above which to use DMA -+ (default 1) -+ -+ debug Enable debug output (default off) -+ -+ -+Name: smi -+Info: Enables the Secondary Memory Interface peripheral. Uses GPIOs 2-25! -+Load: dtoverlay=smi -+Params: -+ -+ -+Name: smi-dev -+Info: Enables the userspace interface for the SMI driver -+Load: dtoverlay=smi-dev -+Params: -+ -+ -+Name: smi-nand -+Info: Enables access to NAND flash via the SMI interface -+Load: dtoverlay=smi-nand -+Params: -+ -+ -+Name: spi-gpio35-39 -+Info: move SPI function block to GPIO 35 to 39 -+Load: dtoverlay=spi-gpio35-39 -+Params: -+ -+ -+Name: spi-rtc -+Info: Adds support for a number of SPI Real Time Clock devices -+Load: dtoverlay=spi-rtc,= -+Params: pcf2123 Select the PCF2123 device -+ -+ -+Name: spi0-hw-cs -+Info: Re-enables hardware CS/CE (chip selects) for SPI0 -+Load: dtoverlay=spi0-hw-cs -+Params: -+ -+ -+Name: spi1-1cs -+Info: Enables spi1 with a single chip select (CS) line and associated spidev -+ dev node. The gpio pin number for the CS line and spidev device node -+ creation are configurable. -+ N.B.: spi1 is only accessible on devices with a 40pin header, eg: -+ A+, B+, Zero and PI2 B; as well as the Compute Module. -+Load: dtoverlay=spi1-1cs,= -+Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). -+ cs0_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev1.0 (default -+ is 'okay' or enabled). -+ -+ -+Name: spi1-2cs -+Info: Enables spi1 with two chip select (CS) lines and associated spidev -+ dev nodes. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+ N.B.: spi1 is only accessible on devices with a 40pin header, eg: -+ A+, B+, Zero and PI2 B; as well as the Compute Module. -+Load: dtoverlay=spi1-2cs,= -+Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). -+ cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1). -+ cs0_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev1.0 (default -+ is 'okay' or enabled). -+ cs1_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev1.1 (default -+ is 'okay' or enabled). -+ -+ -+Name: spi1-3cs -+Info: Enables spi1 with three chip select (CS) lines and associated spidev -+ dev nodes. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+ N.B.: spi1 is only accessible on devices with a 40pin header, eg: -+ A+, B+, Zero and PI2 B; as well as the Compute Module. -+Load: dtoverlay=spi1-3cs,= -+Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). -+ cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1). -+ cs2_pin GPIO pin for CS2 (default 16 - BCM SPI1_CE2). -+ cs0_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev1.0 (default -+ is 'okay' or enabled). -+ cs1_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev1.1 (default -+ is 'okay' or enabled). -+ cs2_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev1.2 (default -+ is 'okay' or enabled). -+ -+ -+Name: spi2-1cs -+Info: Enables spi2 with a single chip select (CS) line and associated spidev -+ dev node. The gpio pin number for the CS line and spidev device node -+ creation are configurable. -+ N.B.: spi2 is only accessible with the Compute Module. -+Load: dtoverlay=spi2-1cs,= -+Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). -+ cs0_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev2.0 (default -+ is 'okay' or enabled). -+ -+ -+Name: spi2-2cs -+Info: Enables spi2 with two chip select (CS) lines and associated spidev -+ dev nodes. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+ N.B.: spi2 is only accessible with the Compute Module. -+Load: dtoverlay=spi2-2cs,= -+Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). -+ cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1). -+ cs0_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev2.0 (default -+ is 'okay' or enabled). -+ cs1_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev2.1 (default -+ is 'okay' or enabled). -+ -+ -+Name: spi2-3cs -+Info: Enables spi2 with three chip select (CS) lines and associated spidev -+ dev nodes. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+ N.B.: spi2 is only accessible with the Compute Module. -+Load: dtoverlay=spi2-3cs,= -+Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). -+ cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1). -+ cs2_pin GPIO pin for CS2 (default 45 - BCM SPI2_CE2). -+ cs0_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev2.0 (default -+ is 'okay' or enabled). -+ cs1_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev2.1 (default -+ is 'okay' or enabled). -+ cs2_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev2.2 (default -+ is 'okay' or enabled). -+ -+ -+Name: tinylcd35 -+Info: 3.5" Color TFT Display by www.tinylcd.com -+ Options: Touch, RTC, keypad -+Load: dtoverlay=tinylcd35,= -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ touch Enable touch panel -+ -+ touchgpio Touch controller IRQ GPIO -+ -+ xohms Touchpanel: Resistance of X-plate in ohms -+ -+ rtc-pcf PCF8563 Real Time Clock -+ -+ rtc-ds DS1307 Real Time Clock -+ -+ keypad Enable keypad -+ -+ Examples: -+ Display with touchpanel, PCF8563 RTC and keypad: -+ dtoverlay=tinylcd35,touch,rtc-pcf,keypad -+ Old touch display: -+ dtoverlay=tinylcd35,touch,touchgpio=3 -+ -+ -+Name: uart1 -+Info: Enable uart1 in place of uart0 -+Load: dtoverlay=uart1,= -+Params: txd1_pin GPIO pin for TXD1 (14, 32 or 40 - default 14) -+ -+ rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15) -+ -+ -+Name: vc4-fkms-v3d -+Info: Enable Eric Anholt's DRM VC4 V3D driver on top of the dispmanx -+ display stack. -+Load: dtoverlay=vc4-fkms-v3d, -+Params: cma-256 CMA is 256MB, 256MB-aligned (needs 1GB) -+ cma-192 CMA is 192MB, 256MB-aligned (needs 1GB) -+ cma-128 CMA is 128MB, 128MB-aligned -+ cma-96 CMA is 96MB, 128MB-aligned -+ cma-64 CMA is 64MB, 64MB-aligned -+ -+ -+Name: vc4-kms-v3d -+Info: Enable Eric Anholt's DRM VC4 HDMI/HVS/V3D driver. Running startx or -+ booting to GUI while this overlay is in use will cause interesting -+ lockups. -+Load: dtoverlay=vc4-kms-v3d, -+Params: cma-256 CMA is 256MB, 256MB-aligned (needs 1GB) -+ cma-192 CMA is 192MB, 256MB-aligned (needs 1GB) -+ cma-128 CMA is 128MB, 128MB-aligned -+ cma-96 CMA is 96MB, 128MB-aligned -+ cma-64 CMA is 64MB, 64MB-aligned -+ -+ -+Name: vga666 -+Info: Overlay for the Fen Logic VGA666 board -+ This uses GPIOs 2-21 (so no I2C), and activates the output 2-3 seconds -+ after the kernel has started. -+Load: dtoverlay=vga666 -+Params: -+ -+ -+Name: w1-gpio -+Info: Configures the w1-gpio Onewire interface module. -+ Use this overlay if you *don't* need a GPIO to drive an external pullup. -+Load: dtoverlay=w1-gpio,= -+Params: gpiopin GPIO for I/O (default "4") -+ -+ pullup Non-zero, "on", or "y" to enable the parasitic -+ power (2-wire, power-on-data) feature -+ -+ -+Name: w1-gpio-pullup -+Info: Configures the w1-gpio Onewire interface module. -+ Use this overlay if you *do* need a GPIO to drive an external pullup. -+Load: dtoverlay=w1-gpio-pullup,= -+Params: gpiopin GPIO for I/O (default "4") -+ -+ pullup Non-zero, "on", or "y" to enable the parasitic -+ power (2-wire, power-on-data) feature -+ -+ extpullup GPIO for external pullup (default "5") -+ -+ -+Name: wittypi -+Info: Configures the wittypi RTC module. -+Load: dtoverlay=wittypi,= -+Params: led_gpio GPIO for LED (default "17") -+ led_trigger Choose which activity the LED tracks (default -+ "default-on") -+ -+ -+Troubleshooting -+=============== -+ -+If you are experiencing problems that you think are DT-related, enable DT -+diagnostic output by adding this to /boot/config.txt: -+ -+ dtdebug=on -+ -+and rebooting. Then run: -+ -+ sudo vcdbg log msg -+ -+and look for relevant messages. -+ -+Further reading -+=============== -+ -+This is only meant to be a quick introduction to the subject of Device Tree on -+Raspberry Pi. There is a more complete explanation here: -+ -+http://www.raspberrypi.org/documentation/configuration/device-tree.md ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts -@@ -0,0 +1,53 @@ -+// Definitions for ADAU1977 ADC -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&soc>; -+ -+ __overlay__ { -+ codec_supply: fixedregulator@0 { -+ compatible = "regulator-fixed"; -+ regulator-name = "AVDD"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c>; -+ -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ adau1977: codec@11 { -+ compatible = "adi,adau1977"; -+ reg = <0x11>; -+ reset-gpios = <&gpio 5 0>; -+ AVDD-supply = <&codec_supply>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "adi,adau1977-adc"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/ads1015-overlay.dts -@@ -0,0 +1,98 @@ -+/* -+ * 2016 - Erik Sejr -+ */ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ /* ----------- ADS1015 ------------ */ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ ads1015: ads1015 { -+ compatible = "ti,ads1015"; -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x48>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "i2c_arm/ads1015"; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ channel_a: channel_a { -+ reg = <4>; -+ ti,gain = <2>; -+ ti,datarate = <4>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "i2c_arm/ads1015"; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ channel_b: channel_b { -+ reg = <5>; -+ ti,gain = <2>; -+ ti,datarate = <4>; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "i2c_arm/ads1015"; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ channel_c: channel_c { -+ reg = <6>; -+ ti,gain = <2>; -+ ti,datarate = <4>; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target-path = "i2c_arm/ads1015"; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ channel_d: channel_d { -+ reg = <7>; -+ ti,gain = <2>; -+ ti,datarate = <4>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ addr = <&ads1015>,"reg:0"; -+ cha_enable = <0>,"=1"; -+ cha_cfg = <&channel_a>,"reg:0"; -+ cha_gain = <&channel_a>,"ti,gain:0"; -+ cha_datarate = <&channel_a>,"ti,datarate:0"; -+ chb_enable = <0>,"=2"; -+ chb_cfg = <&channel_b>,"reg:0"; -+ chb_gain = <&channel_b>,"ti,gain:0"; -+ chb_datarate = <&channel_b>,"ti,datarate:0"; -+ chc_enable = <0>,"=3"; -+ chc_cfg = <&channel_c>,"reg:0"; -+ chc_gain = <&channel_c>,"ti,gain:0"; -+ chc_datarate = <&channel_c>,"ti,datarate:0"; -+ chd_enable = <0>,"=4"; -+ chd_cfg = <&channel_d>,"reg:0"; -+ chd_gain = <&channel_d>,"ti,gain:0"; -+ chd_datarate = <&channel_d>,"ti,datarate:0"; -+ }; -+ -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/ads7846-overlay.dts -@@ -0,0 +1,89 @@ -+/* -+ * Generic Device Tree overlay for the ADS7846 touch controller -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ ads7846_pins: ads7846_pins { -+ brcm,pins = <255>; /* illegal default value */ -+ brcm,function = <0>; /* in */ -+ brcm,pull = <0>; /* none */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ ads7846: ads7846@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ads7846_pins>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <255 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 255 0>; -+ -+ /* driver defaults */ -+ ti,x-min = /bits/ 16 <0>; -+ ti,y-min = /bits/ 16 <0>; -+ ti,x-max = /bits/ 16 <0x0FFF>; -+ ti,y-max = /bits/ 16 <0x0FFF>; -+ ti,pressure-min = /bits/ 16 <0>; -+ ti,pressure-max = /bits/ 16 <0xFFFF>; -+ ti,x-plate-ohms = /bits/ 16 <400>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ cs = <&ads7846>,"reg:0"; -+ speed = <&ads7846>,"spi-max-frequency:0"; -+ penirq = <&ads7846_pins>,"brcm,pins:0", /* REQUIRED */ -+ <&ads7846>,"interrupts:0", -+ <&ads7846>,"pendown-gpio:4"; -+ penirq_pull = <&ads7846_pins>,"brcm,pull:0"; -+ swapxy = <&ads7846>,"ti,swap-xy?"; -+ xmin = <&ads7846>,"ti,x-min;0"; -+ ymin = <&ads7846>,"ti,y-min;0"; -+ xmax = <&ads7846>,"ti,x-max;0"; -+ ymax = <&ads7846>,"ti,y-max;0"; -+ pmin = <&ads7846>,"ti,pressure-min;0"; -+ pmax = <&ads7846>,"ti,pressure-max;0"; -+ xohms = <&ads7846>,"ti,x-plate-ohms;0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts -@@ -0,0 +1,46 @@ -+// Definitions for Digital Dreamtime Akkordion using IQaudIO DAC+ or DACZero -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm5122@4c { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4c>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ frag2: __overlay__ { -+ compatible = "iqaudio,iqaudio-dac"; -+ card_name = "Akkordion"; -+ dai_name = "IQaudIO DAC"; -+ dai_stream_name = "IQaudIO DAC HiFi"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = <&frag2>,"iqaudio,24db_digital_gain?"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts -@@ -0,0 +1,54 @@ -+/* -+ * Definitions for Allo Piano DAC (2.0/2.1) boards -+ * -+ * NB. The Piano DAC 2.1 board contains 2x TI PCM5142 DAC's. One DAC is stereo -+ * (left/right) and the other provides a subwoofer output, using DSP on the -+ * chip for digital high/low pass crossover. -+ * The initial support for this hardware, that doesn't require any codec driver -+ * modifications, uses only one DAC chip for stereo (left/right) output, the -+ * chip with 0x4c slave address. The other chip at 0x4d is currently ignored! -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm5142@4c { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5142"; -+ reg = <0x4c>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ piano_dac: __overlay__ { -+ compatible = "allo,piano-dac"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = -+ <&piano_dac>,"allo,24db_digital_gain?"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/at86rf233-overlay.dts -@@ -0,0 +1,57 @@ -+/dts-v1/; -+/plugin/; -+ -+/* Overlay for Atmel AT86RF233 IEEE 802.15.4 WPAN transceiver on spi0.0 */ -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "okay"; -+ -+ lowpan0: at86rf233@0 { -+ compatible = "atmel,at86rf233"; -+ reg = <0>; -+ interrupt-parent = <&gpio>; -+ interrupts = <23 4>; /* active high */ -+ reset-gpio = <&gpio 24 1>; -+ sleep-gpio = <&gpio 25 1>; -+ spi-max-frequency = <3000000>; -+ xtal-trim = /bits/ 8 <0xf>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ lowpan0_pins: lowpan0_pins { -+ brcm,pins = <23 24 25>; -+ brcm,function = <0 1 1>; /* in out out */ -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ interrupt = <&lowpan0>, "interrupts:0", -+ <&lowpan0_pins>, "brcm,pins:0"; -+ reset = <&lowpan0>, "reset-gpio:4", -+ <&lowpan0_pins>, "brcm,pins:4"; -+ sleep = <&lowpan0>, "sleep-gpio:4", -+ <&lowpan0_pins>, "brcm,pins:8"; -+ speed = <&lowpan0>, "spi-max-frequency:0"; -+ trim = <&lowpan0>, "xtal-trim.0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts -@@ -0,0 +1,39 @@ -+// Definitions for audioinjector.net audio add on soundcard -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ wm8731@1a { -+ #sound-dai-cells = <0>; -+ compatible = "wlf,wm8731"; -+ reg = <0x1a>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "ai,audioinjector-pi-soundcard"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/audremap-overlay.dts -@@ -0,0 +1,19 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&audio_pins>; -+ frag0: __overlay__ { -+ brcm,pins = < 12 13 >; -+ brcm,function = < 4 >; /* alt0 alt0 */ -+ }; -+ }; -+ -+ __overrides__ { -+ swap_lr = <&frag0>, "swap_lr?"; -+ enable_jack = <&frag0>, "enable_jack?"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts -@@ -0,0 +1,23 @@ -+// Definitions for BMP085/BMP180 digital barometric pressure and temperature sensors from Bosch Sensortec -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ bmp085@77 { -+ compatible = "bosch,bmp085"; -+ reg = <0x77>; -+ default-oversampling = <3>; -+ status = "okay"; -+ }; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/dht11-overlay.dts -@@ -0,0 +1,39 @@ -+/* -+ * Overlay for the DHT11/21/22 humidity/temperature sensor modules. -+ */ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ -+ dht11: dht11@0 { -+ compatible = "dht11"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&dht11_pins>; -+ gpios = <&gpio 4 0>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ dht11_pins: dht11_pins { -+ brcm,pins = <4>; -+ brcm,function = <0>; // in -+ brcm,pull = <0>; // off -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ gpiopin = <&dht11_pins>,"brcm,pins:0", -+ <&dht11>,"gpios:4"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts -@@ -0,0 +1,39 @@ -+// Definitions for Dion Audio LOCO DAC-AMP -+ -+/* -+ * PCM5242 DAC (in hardware mode) and TPA3118 AMP. -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ pcm5102a-codec { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5102a"; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "dionaudio,loco-pcm5242-tpa3118"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/dpi18-overlay.dts -@@ -0,0 +1,31 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ // There is no DPI driver module, but we need a platform device -+ // node (that doesn't already use pinctrl) to hang the pinctrl -+ // reference on - leds will do -+ -+ fragment@0 { -+ target = <&leds>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&dpi18_pins>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ dpi18_pins: dpi18_pins { -+ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 -+ 12 13 14 15 16 17 18 19 20 -+ 21>; -+ brcm,function = <6>; /* alt2 */ -+ brcm,pull = <0>; /* no pull */ -+ }; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/dpi24-overlay.dts -@@ -0,0 +1,31 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ // There is no DPI driver module, but we need a platform device -+ // node (that doesn't already use pinctrl) to hang the pinctrl -+ // reference on - leds will do -+ -+ fragment@0 { -+ target = <&leds>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&dpi24_pins>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ dpi24_pins: dpi24_pins { -+ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 -+ 12 13 14 15 16 17 18 19 20 -+ 21 22 23 24 25 26 27>; -+ brcm,function = <6>; /* alt2 */ -+ brcm,pull = <0>; /* no pull */ -+ }; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/dwc-otg-overlay.dts -@@ -0,0 +1,20 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&usb>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ __overlay__ { -+ compatible = "brcm,bcm2708-usb"; -+ reg = <0x7e980000 0x10000>, -+ <0x7e006000 0x1000>; -+ interrupts = <2 0>, -+ <1 9>; -+ status = "okay"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/dwc2-overlay.dts -@@ -0,0 +1,29 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&usb>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ dwc2_usb: __overlay__ { -+ compatible = "brcm,bcm2835-usb"; -+ reg = <0x7e980000 0x10000>; -+ interrupts = <1 9>; -+ dr_mode = "otg"; -+ g-np-tx-fifo-size = <32>; -+ g-rx-fifo-size = <256>; -+ g-tx-fifo-size = <256 128 128 64 64 64 32>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ dr_mode = <&dwc2_usb>, "dr_mode"; -+ g-np-tx-fifo-size = <&dwc2_usb>,"g-np-tx-fifo-size:0"; -+ g-rx-fifo-size = <&dwc2_usb>,"g-rx-fifo-size:0"; -+ g-tx-fifo-size = <&dwc2_usb>,"g-tx-fifo-size:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/enc28j60-overlay.dts -@@ -0,0 +1,53 @@ -+// Overlay for the Microchip ENC28J60 Ethernet Controller -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "okay"; -+ -+ eth1: enc28j60@0{ -+ compatible = "microchip,enc28j60"; -+ reg = <0>; /* CE0 */ -+ pinctrl-names = "default"; -+ pinctrl-0 = <ð1_pins>; -+ interrupt-parent = <&gpio>; -+ interrupts = <25 0x2>; /* falling edge */ -+ spi-max-frequency = <12000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ eth1_pins: eth1_pins { -+ brcm,pins = <25>; -+ brcm,function = <0>; /* in */ -+ brcm,pull = <0>; /* none */ -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ int_pin = <ð1>, "interrupts:0", -+ <ð1_pins>, "brcm,pins:0"; -+ speed = <ð1>, "spi-max-frequency:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts -@@ -0,0 +1,47 @@ -+// Overlay for the Microchip ENC28J60 Ethernet Controller - SPI2 Compute Module -+// Interrupt pin: 39 -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&spi2>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "okay"; -+ -+ eth1: enc28j60@0{ -+ compatible = "microchip,enc28j60"; -+ reg = <0>; /* CE0 */ -+ pinctrl-names = "default"; -+ pinctrl-0 = <ð1_pins>; -+ interrupt-parent = <&gpio>; -+ interrupts = <39 0x2>; /* falling edge */ -+ spi-max-frequency = <12000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ eth1_pins: eth1_pins { -+ brcm,pins = <39>; -+ brcm,function = <0>; /* in */ -+ brcm,pull = <0>; /* none */ -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ int_pin = <ð1>, "interrupts:0", -+ <ð1_pins>, "brcm,pins:0"; -+ speed = <ð1>, "spi-max-frequency:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts -@@ -0,0 +1,44 @@ -+// Definitions for ir-gpio module -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ gpio_ir: ir-receiver { -+ compatible = "gpio-ir-receiver"; -+ -+ // pin number, high or low -+ gpios = <&gpio 18 1>; -+ -+ // parameter for keymap name -+ linux,rc-map-name = "rc-rc6-mce"; -+ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ gpio_ir_pins: gpio_ir_pins { -+ brcm,pins = <18>; // pin 18 -+ brcm,function = <0>; // in -+ brcm,pull = <1>; // down -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ // parameters -+ gpio_pin = <&gpio_ir>,"gpios:4", -+ <&gpio_ir_pins>,"brcm,pins:0"; // pin number -+ gpio_pull = <&gpio_ir_pins>,"brcm,pull:0"; // pull-up/down state -+ -+ rc-map-name = <&gpio_ir>,"linux,rc-map-name"; // default rc map -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts -@@ -0,0 +1,34 @@ -+// Definitions for gpio-poweroff module -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ power_ctrl: power_ctrl { -+ compatible = "gpio-poweroff"; -+ gpios = <&gpio 26 0>; -+ force; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ power_ctrl_pins: power_ctrl_pins { -+ brcm,pins = <26>; -+ brcm,function = <1>; // out -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ gpiopin = <&power_ctrl>,"gpios:4", -+ <&power_ctrl_pins>,"brcm,pins:0"; -+ active_low = <&power_ctrl>,"gpios:8"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts -@@ -0,0 +1,39 @@ -+// Definitions for HiFiBerry Amp/Amp+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ tas5713@1b { -+ #sound-dai-cells = <0>; -+ compatible = "ti,tas5713"; -+ reg = <0x1b>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "hifiberry,hifiberry-amp"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts -@@ -0,0 +1,34 @@ -+// Definitions for HiFiBerry DAC -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ pcm5102a-codec { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5102a"; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "hifiberry,hifiberry-dac"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts -@@ -0,0 +1,56 @@ -+// Definitions for HiFiBerry DAC+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target-path = "/clocks"; -+ __overlay__ { -+ dacpro_osc: dacpro_osc { -+ compatible = "hifiberry,dacpro-clk"; -+ #clock-cells = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm5122@4d { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4d>; -+ clocks = <&dacpro_osc>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&sound>; -+ hifiberry_dacplus: __overlay__ { -+ compatible = "hifiberry,hifiberry-dacplus"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = -+ <&hifiberry_dacplus>,"hifiberry,24db_digital_gain?"; -+ slave = <&hifiberry_dacplus>,"hifiberry-dacplus,slave?"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts -@@ -0,0 +1,39 @@ -+// Definitions for HiFiBerry Digi -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ wm8804@3b { -+ #sound-dai-cells = <0>; -+ compatible = "wlf,wm8804"; -+ reg = <0x3b>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "hifiberry,hifiberry-digi"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts -@@ -0,0 +1,41 @@ -+// Definitions for HiFiBerry Digi Pro -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ wm8804@3b { -+ #sound-dai-cells = <0>; -+ compatible = "wlf,wm8804"; -+ reg = <0x3b>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "hifiberry,hifiberry-digi"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ clock44-gpio = <&gpio 5 0>; -+ clock48-gpio = <&gpio 6 0>; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hy28a-overlay.dts -@@ -0,0 +1,93 @@ -+/* -+ * Device Tree overlay for HY28A display -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ hy28a_pins: hy28a_pins { -+ brcm,pins = <17 25 18>; -+ brcm,function = <0 1 1>; /* in out out */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ hy28a: hy28a@0{ -+ compatible = "ilitek,ili9320"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&hy28a_pins>; -+ -+ spi-max-frequency = <32000000>; -+ spi-cpol; -+ spi-cpha; -+ rotate = <270>; -+ bgr; -+ fps = <50>; -+ buswidth = <8>; -+ startbyte = <0x70>; -+ reset-gpios = <&gpio 25 0>; -+ led-gpios = <&gpio 18 1>; -+ debug = <0>; -+ }; -+ -+ hy28a_ts: hy28a-ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <17 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 17 0>; -+ ti,x-plate-ohms = /bits/ 16 <100>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ speed = <&hy28a>,"spi-max-frequency:0"; -+ rotate = <&hy28a>,"rotate:0"; -+ fps = <&hy28a>,"fps:0"; -+ debug = <&hy28a>,"debug:0"; -+ xohms = <&hy28a_ts>,"ti,x-plate-ohms;0"; -+ resetgpio = <&hy28a>,"reset-gpios:4", -+ <&hy28a_pins>, "brcm,pins:1"; -+ ledgpio = <&hy28a>,"led-gpios:4", -+ <&hy28a_pins>, "brcm,pins:2"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hy28b-overlay.dts -@@ -0,0 +1,148 @@ -+/* -+ * Device Tree overlay for HY28b display shield by Texy -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ hy28b_pins: hy28b_pins { -+ brcm,pins = <17 25 18>; -+ brcm,function = <0 1 1>; /* in out out */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ hy28b: hy28b@0{ -+ compatible = "ilitek,ili9325"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&hy28b_pins>; -+ -+ spi-max-frequency = <48000000>; -+ spi-cpol; -+ spi-cpha; -+ rotate = <270>; -+ bgr; -+ fps = <50>; -+ buswidth = <8>; -+ startbyte = <0x70>; -+ reset-gpios = <&gpio 25 0>; -+ led-gpios = <&gpio 18 1>; -+ -+ gamma = "04 1F 4 7 7 0 7 7 6 0\n0F 00 1 7 4 0 0 0 6 7"; -+ -+ init = <0x10000e7 0x0010 -+ 0x1000000 0x0001 -+ 0x1000001 0x0100 -+ 0x1000002 0x0700 -+ 0x1000003 0x1030 -+ 0x1000004 0x0000 -+ 0x1000008 0x0207 -+ 0x1000009 0x0000 -+ 0x100000a 0x0000 -+ 0x100000c 0x0001 -+ 0x100000d 0x0000 -+ 0x100000f 0x0000 -+ 0x1000010 0x0000 -+ 0x1000011 0x0007 -+ 0x1000012 0x0000 -+ 0x1000013 0x0000 -+ 0x2000032 -+ 0x1000010 0x1590 -+ 0x1000011 0x0227 -+ 0x2000032 -+ 0x1000012 0x009c -+ 0x2000032 -+ 0x1000013 0x1900 -+ 0x1000029 0x0023 -+ 0x100002b 0x000e -+ 0x2000032 -+ 0x1000020 0x0000 -+ 0x1000021 0x0000 -+ 0x2000032 -+ 0x1000050 0x0000 -+ 0x1000051 0x00ef -+ 0x1000052 0x0000 -+ 0x1000053 0x013f -+ 0x1000060 0xa700 -+ 0x1000061 0x0001 -+ 0x100006a 0x0000 -+ 0x1000080 0x0000 -+ 0x1000081 0x0000 -+ 0x1000082 0x0000 -+ 0x1000083 0x0000 -+ 0x1000084 0x0000 -+ 0x1000085 0x0000 -+ 0x1000090 0x0010 -+ 0x1000092 0x0000 -+ 0x1000093 0x0003 -+ 0x1000095 0x0110 -+ 0x1000097 0x0000 -+ 0x1000098 0x0000 -+ 0x1000007 0x0133 -+ 0x1000020 0x0000 -+ 0x1000021 0x0000 -+ 0x2000064>; -+ debug = <0>; -+ }; -+ -+ hy28b_ts: hy28b-ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <17 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 17 0>; -+ ti,x-plate-ohms = /bits/ 16 <100>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ speed = <&hy28b>,"spi-max-frequency:0"; -+ rotate = <&hy28b>,"rotate:0"; -+ fps = <&hy28b>,"fps:0"; -+ debug = <&hy28b>,"debug:0"; -+ xohms = <&hy28b_ts>,"ti,x-plate-ohms;0"; -+ resetgpio = <&hy28b>,"reset-gpios:4", -+ <&hy28b_pins>, "brcm,pins:1"; -+ ledgpio = <&hy28b>,"led-gpios:4", -+ <&hy28b_pins>, "brcm,pins:2"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts -@@ -0,0 +1,13 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ compatible = "brcm,bcm2708-i2c"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts -@@ -0,0 +1,43 @@ -+// Overlay for i2c_gpio bitbanging host bus. -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ i2c_gpio: i2c@0 { -+ compatible = "i2c-gpio"; -+ gpios = <&gpio 23 0 /* sda */ -+ &gpio 24 0 /* scl */ -+ >; -+ i2c-gpio,delay-us = <2>; /* ~100 kHz */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/aliases"; -+ __overlay__ { -+ i2c_gpio = "/i2c@0"; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "/__symbols__"; -+ __overlay__ { -+ i2c_gpio = "/i2c@0"; -+ }; -+ }; -+ -+ __overrides__ { -+ i2c_gpio_sda = <&i2c_gpio>,"gpios:4"; -+ i2c_gpio_scl = <&i2c_gpio>,"gpios:16"; -+ i2c_gpio_delay_us = <&i2c_gpio>,"i2c-gpio,delay-us:0"; -+ }; -+}; -+ ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c-mux-overlay.dts -@@ -0,0 +1,139 @@ -+// Umbrella I2C Mux overlay -+ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pca9542: mux@70 { -+ compatible = "nxp,pca9542"; -+ reg = <0x70>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ }; -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pca9545: mux@70 { -+ compatible = "nxp,pca9545"; -+ reg = <0x70>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ }; -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ }; -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ }; -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pca9548: mux@70 { -+ compatible = "nxp,pca9548"; -+ reg = <0x70>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ }; -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ }; -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ }; -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ }; -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ }; -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ }; -+ i2c@6 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <6>; -+ }; -+ i2c@7 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <7>; -+ }; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ pca9542 = <0>, "+0"; -+ pca9545 = <0>, "+1"; -+ pca9548 = <0>, "+2"; -+ -+ addr = <&pca9542>,"reg:0", -+ <&pca9545>,"reg:0", -+ <&pca9548>,"reg:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts -@@ -0,0 +1,26 @@ -+// Definitions for NXP PCA9685A I2C PWM controller on ARM I2C bus. -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pca: pca@40 { -+ compatible = "nxp,pca9685"; -+ #pwm-cells = <2>; -+ reg = <0x40>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ __overrides__ { -+ addr = <&pca>,"reg:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts -@@ -0,0 +1,83 @@ -+// Definitions for several I2C based Real Time Clocks -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ abx80x: abx80x@69 { -+ compatible = "abracon,abx80x"; -+ reg = <0x69>; -+ abracon,tc-diode = "standard"; -+ abracon,tc-resistor = <0>; -+ status = "disable"; -+ }; -+ ds1307: ds1307@68 { -+ compatible = "maxim,ds1307"; -+ reg = <0x68>; -+ status = "disable"; -+ }; -+ ds1339: ds1339@68 { -+ compatible = "dallas,ds1339"; -+ trickle-resistor-ohms = <0>; -+ reg = <0x68>; -+ status = "disable"; -+ }; -+ mcp7940x: mcp7940x@6f { -+ compatible = "microchip,mcp7940x"; -+ reg = <0x6f>; -+ status = "disable"; -+ }; -+ mcp7941x: mcp7941x@6f { -+ compatible = "microchip,mcp7941x"; -+ reg = <0x6f>; -+ status = "disable"; -+ }; -+ ds3231: ds3231@68 { -+ compatible = "maxim,ds3231"; -+ reg = <0x68>; -+ status = "disable"; -+ }; -+ pcf2127: pcf2127@51 { -+ compatible = "nxp,pcf2127"; -+ reg = <0x51>; -+ status = "disable"; -+ }; -+ pcf8523: pcf8523@68 { -+ compatible = "nxp,pcf8523"; -+ reg = <0x68>; -+ status = "disable"; -+ }; -+ pcf8563: pcf8563@51 { -+ compatible = "nxp,pcf8563"; -+ reg = <0x51>; -+ status = "disable"; -+ }; -+ }; -+ }; -+ __overrides__ { -+ abx80x = <&abx80x>,"status"; -+ ds1307 = <&ds1307>,"status"; -+ ds1339 = <&ds1339>,"status"; -+ ds3231 = <&ds3231>,"status"; -+ mcp7940x = <&mcp7940x>,"status"; -+ mcp7941x = <&mcp7941x>,"status"; -+ pcf2127 = <&pcf2127>,"status"; -+ pcf8523 = <&pcf8523>,"status"; -+ pcf8563 = <&pcf8563>,"status"; -+ trickle-diode-type = <&abx80x>,"abracon,tc-diode"; -+ trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", -+ <&abx80x>,"abracon,tc-resistor"; -+ wakeup-source = <&ds1339>,"wakeup-source?", -+ <&ds3231>,"wakeup-source?", -+ <&mcp7940x>,"wakeup-source?", -+ <&mcp7941x>,"wakeup-source?"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts -@@ -0,0 +1,34 @@ -+// Definitions for a few digital barometric pressure and temperature sensors -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ bmp085: bmp085@77 { -+ compatible = "bosch,bmp085"; -+ reg = <0x77>; -+ default-oversampling = <3>; -+ status = "disable"; -+ }; -+ -+ bmp280: bmp280@76 { -+ compatible = "bosch,bmp280"; -+ reg = <0x76>; -+ status = "disable"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ bmp085 = <&bmp085>,"status"; -+ bmp280 = <&bmp280>,"status"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts -@@ -0,0 +1,61 @@ -+/* -+ * Device tree overlay for i2c_bcm2708, i2c0 bus -+ * -+ * Compile: -+ * dtc -@ -I dts -O dtb -o i2c0-bcm2708-overlay.dtb i2c0-bcm2708-overlay.dts -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2c0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c0_pins>; -+ frag1: __overlay__ { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <28 29>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <44 45>; -+ brcm,function = <5>; /* alt1 */ -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <46 47>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ -+ __overrides__ { -+ sda0_pin = <&frag1>,"brcm,pins:0"; -+ scl0_pin = <&frag1>,"brcm,pins:4"; -+ pins_0_1 = <0>,"+1-2-3-4"; -+ pins_28_29 = <0>,"-1+2-3-4"; -+ pins_44_45 = <0>,"-1-2+3-4"; -+ pins_46_47 = <0>,"-1-2-3+4"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts -@@ -0,0 +1,37 @@ -+/* -+ * Device tree overlay for i2c_bcm2708, i2c1 bus -+ * -+ * Compile: -+ * dtc -@ -I dts -O dtb -o i2c1-bcm2708-overlay.dtb i2c1-bcm2708-overlay.dts -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2c1>; -+ __overlay__ { -+ pinctrl-0 = <&i2c1_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ sda1_pin = <&i2c1_pins>,"brcm,pins:0"; -+ scl1_pin = <&i2c1_pins>,"brcm,pins:4"; -+ pin_func = <&i2c1_pins>,"brcm,function:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts -@@ -0,0 +1,18 @@ -+/* -+ * Device tree overlay to move i2s to gpio 28 to 31 on CM -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&i2s_pins>; -+ __overlay__ { -+ brcm,pins = <28 29 30 31>; -+ brcm,function = <6>; /* alt2 */ -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts -@@ -0,0 +1,43 @@ -+// Definitions for IQaudIO DAC -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm5122@4c { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4c>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ frag2: __overlay__ { -+ compatible = "iqaudio,iqaudio-dac"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = <&frag2>,"iqaudio,24db_digital_gain?"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts -@@ -0,0 +1,46 @@ -+// Definitions for IQaudIO DAC+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm5122@4c { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4c>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ iqaudio_dac: __overlay__ { -+ compatible = "iqaudio,iqaudio-dac"; -+ i2s-controller = <&i2s>; -+ mute-gpios = <&gpio 22 0>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = <&iqaudio_dac>,"iqaudio,24db_digital_gain?"; -+ auto_mute_amp = <&iqaudio_dac>,"iqaudio-dac,auto-mute-amp?"; -+ unmute_amp = <&iqaudio_dac>,"iqaudio-dac,unmute-amp?"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts -@@ -0,0 +1,47 @@ -+// Definitions for IQAudIO Digi WM8804 audio board -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ wm8804@3b { -+ #sound-dai-cells = <0>; -+ compatible = "wlf,wm8804"; -+ reg = <0x3b>; -+ status = "okay"; -+ // DVDD-supply = <®_3v3>; -+ // PVDD-supply = <®_3v3>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ wm8804_digi: __overlay__ { -+ compatible = "iqaudio,wm8804-digi"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ card_name = <&wm8804_digi>,"wm8804-digi,card-name"; -+ dai_name = <&wm8804_digi>,"wm8804-digi,dai-name"; -+ dai_stream_name = <&wm8804_digi>,"wm8804-digi,dai-stream-name"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts -@@ -0,0 +1,43 @@ -+// Definitions for JustBoom DAC -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm5122@4d { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4d>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ frag2: __overlay__ { -+ compatible = "justboom,justboom-dac"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = <&frag2>,"justboom,24db_digital_gain?"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts -@@ -0,0 +1,39 @@ -+// Definitions for JustBoom Digi -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ wm8804@3b { -+ #sound-dai-cells = <0>; -+ compatible = "wlf,wm8804"; -+ reg = <0x3b>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "justboom,justboom-digi"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts -@@ -0,0 +1,57 @@ -+// Definitions for lirc-rpi module -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ lirc_rpi: lirc_rpi { -+ compatible = "rpi,lirc-rpi"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&lirc_pins>; -+ status = "okay"; -+ -+ // Override autodetection of IR receiver circuit -+ // (0 = active high, 1 = active low, -1 = no override ) -+ rpi,sense = <0xffffffff>; -+ -+ // Software carrier -+ // (0 = off, 1 = on) -+ rpi,softcarrier = <1>; -+ -+ // Invert output -+ // (0 = off, 1 = on) -+ rpi,invert = <0>; -+ -+ // Enable debugging messages -+ // (0 = off, 1 = on) -+ rpi,debug = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ lirc_pins: lirc_pins { -+ brcm,pins = <17 18>; -+ brcm,function = <1 0>; // out in -+ brcm,pull = <0 1>; // off down -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ gpio_out_pin = <&lirc_pins>,"brcm,pins:0"; -+ gpio_in_pin = <&lirc_pins>,"brcm,pins:4"; -+ gpio_in_pull = <&lirc_pins>,"brcm,pull:4"; -+ -+ sense = <&lirc_rpi>,"rpi,sense:0"; -+ softcarrier = <&lirc_rpi>,"rpi,softcarrier:0"; -+ invert = <&lirc_rpi>,"rpi,invert:0"; -+ debug = <&lirc_rpi>,"rpi,debug:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mcp23017-overlay.dts -@@ -0,0 +1,54 @@ -+// Definitions for MCP23017 Gpio Extender from Microchip Semiconductor -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&i2c1>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ mcp23017_pins: mcp23017_pins { -+ brcm,pins = <4>; -+ brcm,function = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp23017: mcp@20 { -+ compatible = "microchip,mcp23017"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells=<2>; -+ interrupt-parent = <&gpio>; -+ interrupts = <4 2>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ gpiopin = <&mcp23017_pins>,"brcm,pins:0", -+ <&mcp23017>,"interrupts:0"; -+ addr = <&mcp23017>,"reg:0"; -+ }; -+}; -+ ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mcp23s17-overlay.dts -@@ -0,0 +1,732 @@ -+// Overlay for MCP23S08/17 GPIO Extenders from Microchip Semiconductor -+ -+// dtparams: -+// s08-spi--present - 4-bit integer, bitmap indicating MCP23S08 devices present on SPI, CS#. -+// s17-spi--present - 8-bit integer, bitmap indicating MCP23S17 devices present on SPI, CS#. -+// s08-spi--int-gpio - integer, enables interrupts on a single MCP23S08 device on SPI, CS#, specifies the GPIO pin to which INT output is connected. -+// s17-spi--int-gpio - integer, enables mirrored interrupts on a single MCP23S17 device on SPI, CS#, specifies the GPIO pin to which either INTA or INTB output is connected. -+// -+// If devices are present on SPI1 or SPI2, those interfaces must be enabled with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. -+// If interrupts are enabled for a device on a given CS# on a SPI bus, that device must be the only one present on that SPI bus/CS#. -+// -+// Example 1: A single MCP23S17 device on SPI0, CS#0 with its SPI addr set to 0 and INTA output connected to GPIO25: -+// dtoverlay=mcp23s17:s17-spi0-0-present=1,s17-spi0-0-int-gpio=25 -+// -+// Example 2: Two MCP23S08 devices on SPI1, CS#0 with their addrs set to 2 and 3. Three MCP23S17 devices on SPI1, CS#1 with their addrs set to 0, 1 and 7: -+// dtoverlay=spi1-2cs -+// dtoverlay=mcp23s17:s08-spi1-0-present=12,s17-spi1-1-present=131 -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ // disable spi-dev on spi0.0 -+ fragment@0 { -+ target = <&spidev0>; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi0.1 -+ fragment@1 { -+ target = <&spidev1>; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi1.0 -+ fragment@2 { -+ target-path = "spi1/spidev@0"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi1.1 -+ fragment@3 { -+ target-path = "spi1/spidev@1"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi1.2 -+ fragment@4 { -+ target-path = "spi1/spidev@2"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi2.0 -+ fragment@5 { -+ target-path = "spi2/spidev@0"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi2.1 -+ fragment@6 { -+ target-path = "spi2/spidev@1"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi2.2 -+ fragment@7 { -+ target-path = "spi2/spidev@2"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // enable one or more mcp23s08s on spi0.0 -+ fragment@8 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s08_00: mcp23s08@0 { -+ compatible = "microchip,mcp23s08"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi0-0-present parameter */ -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi0-0-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s08s on spi0.1 -+ fragment@9 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s08_01: mcp23s08@1 { -+ compatible = "microchip,mcp23s08"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi0-1-present parameter */ -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi0-1-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s08s on spi1.0 -+ fragment@10 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s08_10: mcp23s08@0 { -+ compatible = "microchip,mcp23s08"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-0-present parameter */ -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-0-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s08s on spi1.1 -+ fragment@11 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s08_11: mcp23s08@1 { -+ compatible = "microchip,mcp23s08"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-1-present parameter */ -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-1-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s08s on spi1.2 -+ fragment@12 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s08_12: mcp23s08@2 { -+ compatible = "microchip,mcp23s08"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-2-present parameter */ -+ reg = <2>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-2-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s08s on spi2.0 -+ fragment@13 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s08_20: mcp23s08@0 { -+ compatible = "microchip,mcp23s08"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-0-present parameter */ -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-0-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s08s on spi2.1 -+ fragment@14 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s08_21: mcp23s08@1 { -+ compatible = "microchip,mcp23s08"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-1-present parameter */ -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-1-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s08s on spi2.2 -+ fragment@15 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s08_22: mcp23s08@2 { -+ compatible = "microchip,mcp23s08"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-2-present parameter */ -+ reg = <2>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-2-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s17s on spi0.0 -+ fragment@16 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s17_00: mcp23s17@0 { -+ compatible = "microchip,mcp23s17"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi0-0-present parameter */ -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi0-0-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s17s on spi0.1 -+ fragment@17 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s17_01: mcp23s17@1 { -+ compatible = "microchip,mcp23s17"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi0-1-present parameter */ -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi0-1-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s17s on spi1.0 -+ fragment@18 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s17_10: mcp23s17@0 { -+ compatible = "microchip,mcp23s17"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-0-present parameter */ -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-0-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s17s on spi1.1 -+ fragment@19 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s17_11: mcp23s17@1 { -+ compatible = "microchip,mcp23s17"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-1-present parameter */ -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-1-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s17s on spi1.2 -+ fragment@20 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s17_12: mcp23s17@2 { -+ compatible = "microchip,mcp23s17"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-2-present parameter */ -+ reg = <2>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-2-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s17s on spi2.0 -+ fragment@21 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s17_20: mcp23s17@0 { -+ compatible = "microchip,mcp23s17"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-0-present parameter */ -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-0-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s17s on spi2.1 -+ fragment@22 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s17_21: mcp23s17@1 { -+ compatible = "microchip,mcp23s17"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-1-present parameter */ -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-1-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s17s on spi2.2 -+ fragment@23 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s17_22: mcp23s17@2 { -+ compatible = "microchip,mcp23s17"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-2-present parameter */ -+ reg = <2>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-2-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi0.0 as a input with no pull-up/down -+ fragment@24 { -+ target = <&gpio>; -+ __dormant__ { -+ spi0_0_int_pins: spi0_0_int_pins { -+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi0-0-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi0.1 as a input with no pull-up/down -+ fragment@25 { -+ target = <&gpio>; -+ __dormant__ { -+ spi0_1_int_pins: spi0_1_int_pins { -+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi0-1-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.0 as a input with no pull-up/down -+ fragment@26 { -+ target = <&gpio>; -+ __dormant__ { -+ spi1_0_int_pins: spi1_0_int_pins { -+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-0-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.1 as a input with no pull-up/down -+ fragment@27 { -+ target = <&gpio>; -+ __dormant__ { -+ spi1_1_int_pins: spi1_1_int_pins { -+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-1-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.2 as a input with no pull-up/down -+ fragment@28 { -+ target = <&gpio>; -+ __dormant__ { -+ spi1_2_int_pins: spi1_2_int_pins { -+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-2-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.0 as a input with no pull-up/down -+ fragment@29 { -+ target = <&gpio>; -+ __dormant__ { -+ spi2_0_int_pins: spi2_0_int_pins { -+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-0-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.1 as a input with no pull-up/down -+ fragment@30 { -+ target = <&gpio>; -+ __dormant__ { -+ spi2_1_int_pins: spi2_1_int_pins { -+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-1-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.2 as a input with no pull-up/down -+ fragment@31 { -+ target = <&gpio>; -+ __dormant__ { -+ spi2_2_int_pins: spi2_2_int_pins { -+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-2-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s08 on spi0.0. -+ // Use default active low interrupt signalling. -+ fragment@32 { -+ target = <&mcp23s08_00>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s08 on spi0.1. -+ // Use default active low interrupt signalling. -+ fragment@33 { -+ target = <&mcp23s08_01>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s08 on spi1.0. -+ // Use default active low interrupt signalling. -+ fragment@34 { -+ target = <&mcp23s08_10>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s08 on spi1.1. -+ // Use default active low interrupt signalling. -+ fragment@35 { -+ target = <&mcp23s08_11>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s08 on spi1.2. -+ // Use default active low interrupt signalling. -+ fragment@36 { -+ target = <&mcp23s08_12>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s08 on spi2.0. -+ // Use default active low interrupt signalling. -+ fragment@37 { -+ target = <&mcp23s08_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s08 on spi2.1. -+ // Use default active low interrupt signalling. -+ fragment@38 { -+ target = <&mcp23s08_21>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s08 on spi2.2. -+ // Use default active low interrupt signalling. -+ fragment@39 { -+ target = <&mcp23s08_22>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s17 on spi0.0. -+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. -+ // Use default active low interrupt signalling. -+ fragment@40 { -+ target = <&mcp23s17_00>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s17 on spi0.1. -+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. -+ // Configure INTA/B outputs of mcp23s08/17 as active low. -+ fragment@41 { -+ target = <&mcp23s17_01>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s17 on spi1.0. -+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. -+ // Configure INTA/B outputs of mcp23s08/17 as active low. -+ fragment@42 { -+ target = <&mcp23s17_10>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s17 on spi1.1. -+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. -+ // Configure INTA/B outputs of mcp23s08/17 as active low. -+ fragment@43 { -+ target = <&mcp23s17_11>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s17 on spi1.2. -+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. -+ // Configure INTA/B outputs of mcp23s08/17 as active low. -+ fragment@44 { -+ target = <&mcp23s17_12>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s17 on spi2.0. -+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. -+ // Configure INTA/B outputs of mcp23s08/17 as active low. -+ fragment@45 { -+ target = <&mcp23s17_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s17 on spi2.1. -+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. -+ // Configure INTA/B outputs of mcp23s08/17 as active low. -+ fragment@46 { -+ target = <&mcp23s17_21>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s17 on spi2.2. -+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. -+ // Configure INTA/B outputs of mcp23s08/17 as active low. -+ fragment@47 { -+ target = <&mcp23s17_22>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ -+ __overrides__ { -+ s08-spi0-0-present = <0>,"+0+8", <&mcp23s08_00>,"microchip,spi-present-mask:0"; -+ s08-spi0-1-present = <0>,"+1+9", <&mcp23s08_01>,"microchip,spi-present-mask:0"; -+ s08-spi1-0-present = <0>,"+2+10", <&mcp23s08_10>,"microchip,spi-present-mask:0"; -+ s08-spi1-1-present = <0>,"+3+11", <&mcp23s08_11>,"microchip,spi-present-mask:0"; -+ s08-spi1-2-present = <0>,"+4+12", <&mcp23s08_12>,"microchip,spi-present-mask:0"; -+ s08-spi2-0-present = <0>,"+5+13", <&mcp23s08_20>,"microchip,spi-present-mask:0"; -+ s08-spi2-1-present = <0>,"+6+14", <&mcp23s08_21>,"microchip,spi-present-mask:0"; -+ s08-spi2-2-present = <0>,"+7+15", <&mcp23s08_22>,"microchip,spi-present-mask:0"; -+ s17-spi0-0-present = <0>,"+0+16", <&mcp23s17_00>,"microchip,spi-present-mask:0"; -+ s17-spi0-1-present = <0>,"+1+17", <&mcp23s17_01>,"microchip,spi-present-mask:0"; -+ s17-spi1-0-present = <0>,"+2+18", <&mcp23s17_10>,"microchip,spi-present-mask:0"; -+ s17-spi1-1-present = <0>,"+3+19", <&mcp23s17_11>,"microchip,spi-present-mask:0"; -+ s17-spi1-2-present = <0>,"+4+20", <&mcp23s17_12>,"microchip,spi-present-mask:0"; -+ s17-spi2-0-present = <0>,"+5+21", <&mcp23s17_20>,"microchip,spi-present-mask:0"; -+ s17-spi2-1-present = <0>,"+6+22", <&mcp23s17_21>,"microchip,spi-present-mask:0"; -+ s17-spi2-2-present = <0>,"+7+23", <&mcp23s17_22>,"microchip,spi-present-mask:0"; -+ s08-spi0-0-int-gpio = <0>,"+24+32", <&spi0_0_int_pins>,"brcm,pins:0", <&mcp23s08_00>,"interrupts:0"; -+ s08-spi0-1-int-gpio = <0>,"+25+33", <&spi0_1_int_pins>,"brcm,pins:0", <&mcp23s08_01>,"interrupts:0"; -+ s08-spi1-0-int-gpio = <0>,"+26+34", <&spi1_0_int_pins>,"brcm,pins:0", <&mcp23s08_10>,"interrupts:0"; -+ s08-spi1-1-int-gpio = <0>,"+27+35", <&spi1_1_int_pins>,"brcm,pins:0", <&mcp23s08_11>,"interrupts:0"; -+ s08-spi1-2-int-gpio = <0>,"+28+36", <&spi1_2_int_pins>,"brcm,pins:0", <&mcp23s08_12>,"interrupts:0"; -+ s08-spi2-0-int-gpio = <0>,"+29+37", <&spi2_0_int_pins>,"brcm,pins:0", <&mcp23s08_20>,"interrupts:0"; -+ s08-spi2-1-int-gpio = <0>,"+30+38", <&spi2_1_int_pins>,"brcm,pins:0", <&mcp23s08_21>,"interrupts:0"; -+ s08-spi2-2-int-gpio = <0>,"+31+39", <&spi2_2_int_pins>,"brcm,pins:0", <&mcp23s08_22>,"interrupts:0"; -+ s17-spi0-0-int-gpio = <0>,"+24+40", <&spi0_0_int_pins>,"brcm,pins:0", <&mcp23s17_00>,"interrupts:0"; -+ s17-spi0-1-int-gpio = <0>,"+25+41", <&spi0_1_int_pins>,"brcm,pins:0", <&mcp23s17_01>,"interrupts:0"; -+ s17-spi1-0-int-gpio = <0>,"+26+42", <&spi1_0_int_pins>,"brcm,pins:0", <&mcp23s17_10>,"interrupts:0"; -+ s17-spi1-1-int-gpio = <0>,"+27+43", <&spi1_1_int_pins>,"brcm,pins:0", <&mcp23s17_11>,"interrupts:0"; -+ s17-spi1-2-int-gpio = <0>,"+28+44", <&spi1_2_int_pins>,"brcm,pins:0", <&mcp23s17_12>,"interrupts:0"; -+ s17-spi2-0-int-gpio = <0>,"+29+45", <&spi2_0_int_pins>,"brcm,pins:0", <&mcp23s17_20>,"interrupts:0"; -+ s17-spi2-1-int-gpio = <0>,"+30+46", <&spi2_1_int_pins>,"brcm,pins:0", <&mcp23s17_21>,"interrupts:0"; -+ s17-spi2-2-int-gpio = <0>,"+31+47", <&spi2_2_int_pins>,"brcm,pins:0", <&mcp23s17_22>,"interrupts:0"; -+ }; -+}; -+ ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts -@@ -0,0 +1,73 @@ -+/* -+ * Device tree overlay for mcp251x/can0 on spi0.0 -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; -+ /* disable spi-dev for spi0.0 */ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ /* the interrupt pin of the can-controller */ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ can0_pins: can0_pins { -+ brcm,pins = <25>; -+ brcm,function = <0>; /* input */ -+ }; -+ }; -+ }; -+ -+ /* the clock/oscillator of the can-controller */ -+ fragment@3 { -+ target-path = "/clocks"; -+ __overlay__ { -+ /* external oscillator of mcp2515 on SPI0.0 */ -+ can0_osc: can0_osc { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <16000000>; -+ }; -+ }; -+ }; -+ -+ /* the spi config of the can-controller itself binding everything together */ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ can0: mcp2515@0 { -+ reg = <0>; -+ compatible = "microchip,mcp2515"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&can0_pins>; -+ spi-max-frequency = <10000000>; -+ interrupt-parent = <&gpio>; -+ interrupts = <25 0x2>; -+ clocks = <&can0_osc>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ oscillator = <&can0_osc>,"clock-frequency:0"; -+ spimaxfrequency = <&can0>,"spi-max-frequency:0"; -+ interrupt = <&can0_pins>,"brcm,pins:0",<&can0>,"interrupts:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts -@@ -0,0 +1,73 @@ -+/* -+ * Device tree overlay for mcp251x/can1 on spi0.1 edited by petit_miner -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; -+ /* disable spi-dev for spi0.1 */ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ /* the interrupt pin of the can-controller */ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ can1_pins: can1_pins { -+ brcm,pins = <25>; -+ brcm,function = <0>; /* input */ -+ }; -+ }; -+ }; -+ -+ /* the clock/oscillator of the can-controller */ -+ fragment@3 { -+ target-path = "/clocks"; -+ __overlay__ { -+ /* external oscillator of mcp2515 on spi0.1 */ -+ can1_osc: can1_osc { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <16000000>; -+ }; -+ }; -+ }; -+ -+ /* the spi config of the can-controller itself binding everything together */ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ can1: mcp2515@1 { -+ reg = <1>; -+ compatible = "microchip,mcp2515"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&can1_pins>; -+ spi-max-frequency = <10000000>; -+ interrupt-parent = <&gpio>; -+ interrupts = <25 0x2>; -+ clocks = <&can1_osc>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ oscillator = <&can1_osc>,"clock-frequency:0"; -+ spimaxfrequency = <&can1>,"spi-max-frequency:0"; -+ interrupt = <&can1_pins>,"brcm,pins:0",<&can1>,"interrupts:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/midi-uart0-overlay.dts -@@ -0,0 +1,36 @@ -+/dts-v1/; -+/plugin/; -+ -+#include -+ -+/* -+ * Fake a higher clock rate to get a larger divisor, and thereby a lower -+ * baudrate. The real clock is 48MHz, which we scale so that requesting -+ * 38.4kHz results in an actual 31.25kHz. -+ * -+ * 48000000*38400/31250 = 58982400 -+ */ -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/clocks"; -+ __overlay__ { -+ midi_clk: midi_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-output-names = "uart0_pclk"; -+ clock-frequency = <58982400>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&uart0>; -+ __overlay__ { -+ clocks = <&midi_clk>, -+ <&clocks BCM2835_CLOCK_VPU>; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mmc-overlay.dts -@@ -0,0 +1,38 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&mmc>; -+ frag0: __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc_pins>; -+ bus-width = <4>; -+ brcm,overclock-50 = <0>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ mmc_pins: mmc_pins { -+ brcm,pins = <48 49 50 51 52 53>; -+ brcm,function = <7>; /* alt3 */ -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sdhost>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ __overrides__ { -+ overclock_50 = <&frag0>,"brcm,overclock-50:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mz61581-overlay.dts -@@ -0,0 +1,117 @@ -+/* -+ * Device Tree overlay for MZ61581-PI-EXT 2014.12.28 by Tontec -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ mz61581_pins: mz61581_pins { -+ brcm,pins = <4 15 18 25>; -+ brcm,function = <0 1 1 1>; /* in out out out */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mz61581: mz61581@0{ -+ compatible = "samsung,s6d02a1"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mz61581_pins>; -+ -+ spi-max-frequency = <128000000>; -+ spi-cpol; -+ spi-cpha; -+ -+ width = <320>; -+ height = <480>; -+ rotate = <270>; -+ bgr; -+ fps = <30>; -+ buswidth = <8>; -+ txbuflen = <32768>; -+ -+ reset-gpios = <&gpio 15 0>; -+ dc-gpios = <&gpio 25 0>; -+ led-gpios = <&gpio 18 0>; -+ -+ init = <0x10000b0 00 -+ 0x1000011 -+ 0x20000ff -+ 0x10000b3 0x02 0x00 0x00 0x00 -+ 0x10000c0 0x13 0x3b 0x00 0x02 0x00 0x01 0x00 0x43 -+ 0x10000c1 0x08 0x16 0x08 0x08 -+ 0x10000c4 0x11 0x07 0x03 0x03 -+ 0x10000c6 0x00 -+ 0x10000c8 0x03 0x03 0x13 0x5c 0x03 0x07 0x14 0x08 0x00 0x21 0x08 0x14 0x07 0x53 0x0c 0x13 0x03 0x03 0x21 0x00 -+ 0x1000035 0x00 -+ 0x1000036 0xa0 -+ 0x100003a 0x55 -+ 0x1000044 0x00 0x01 -+ 0x10000d0 0x07 0x07 0x1d 0x03 -+ 0x10000d1 0x03 0x30 0x10 -+ 0x10000d2 0x03 0x14 0x04 -+ 0x1000029 -+ 0x100002c>; -+ -+ /* This is a workaround to make sure the init sequence slows down and doesn't fail */ -+ debug = <3>; -+ }; -+ -+ mz61581_ts: mz61581_ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <4 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 4 0>; -+ -+ ti,x-plate-ohms = /bits/ 16 <60>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ speed = <&mz61581>, "spi-max-frequency:0"; -+ rotate = <&mz61581>, "rotate:0"; -+ fps = <&mz61581>, "fps:0"; -+ txbuflen = <&mz61581>, "txbuflen:0"; -+ debug = <&mz61581>, "debug:0"; -+ xohms = <&mz61581_ts>,"ti,x-plate-ohms;0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts -@@ -0,0 +1,27 @@ -+/dts-v1/; -+/plugin/; -+ -+/* Pi3 uses a GPIO expander to drive the LEDs which can only be accessed -+ from the VPU. There is a special driver for this with a separate DT node, -+ which has the unfortunate consequence of breaking the act_led_gpio and -+ act_led_activelow dtparams. -+ -+ This overlay changes the GPIO controller back to the standard one and -+ restores the dtparams. -+*/ -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&act_led>; -+ frag0: __overlay__ { -+ gpios = <&gpio 0 0>; -+ }; -+ }; -+ -+ __overrides__ { -+ gpio = <&frag0>,"gpios:4"; -+ activelow = <&frag0>,"gpios:8"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts -@@ -0,0 +1,46 @@ -+/dts-v1/; -+/plugin/; -+ -+/* Disable Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15. -+ To disable the systemd service that initialises the modem so it doesn't use -+ the UART: -+ -+ sudo systemctl disable hciuart -+*/ -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&uart1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&uart0>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&uart0_pins>; -+ __overlay__ { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "/aliases"; -+ __overlay__ { -+ serial0 = "/soc/serial@7e201000"; -+ serial1 = "/soc/serial@7e215040"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts -@@ -0,0 +1,64 @@ -+/dts-v1/; -+/plugin/; -+ -+/* Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore -+ UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum -+ usable baudrate. -+ -+ It is also necessary to edit /lib/systemd/system/hciuart.service and -+ replace ttyAMA0 with ttyS0, unless you have a system with udev rules -+ that create /dev/serial0 and /dev/serial1, in which case use /dev/serial1 -+ instead because it will always be correct. -+ -+ If cmdline.txt uses the alias serial0 to refer to the user-accessable port -+ then the firmware will replace with the appropriate port whether or not -+ this overlay is used. -+*/ -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&uart0>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&uart1>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins &bt_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&uart0_pins>; -+ __overlay__ { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&uart1_pins>; -+ __overlay__ { -+ brcm,pins = <32 33>; -+ brcm,function = <2>; /* alt5=UART1 */ -+ brcm,pull = <0 2>; -+ }; -+ }; -+ -+ fragment@4 { -+ target-path = "/aliases"; -+ __overlay__ { -+ serial0 = "/soc/serial@7e201000"; -+ serial1 = "/soc/serial@7e215040"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/piscreen-overlay.dts -@@ -0,0 +1,102 @@ -+/* -+ * Device Tree overlay for PiScreen 3.5" display shield by Ozzmaker -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ piscreen_pins: piscreen_pins { -+ brcm,pins = <17 25 24 22>; -+ brcm,function = <0 1 1 1>; /* in out out out */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ piscreen: piscreen@0{ -+ compatible = "ilitek,ili9486"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&piscreen_pins>; -+ -+ spi-max-frequency = <24000000>; -+ rotate = <270>; -+ bgr; -+ fps = <30>; -+ buswidth = <8>; -+ regwidth = <16>; -+ reset-gpios = <&gpio 25 0>; -+ dc-gpios = <&gpio 24 0>; -+ led-gpios = <&gpio 22 1>; -+ debug = <0>; -+ -+ init = <0x10000b0 0x00 -+ 0x1000011 -+ 0x20000ff -+ 0x100003a 0x55 -+ 0x1000036 0x28 -+ 0x10000c2 0x44 -+ 0x10000c5 0x00 0x00 0x00 0x00 -+ 0x10000e0 0x0f 0x1f 0x1c 0x0c 0x0f 0x08 0x48 0x98 0x37 0x0a 0x13 0x04 0x11 0x0d 0x00 -+ 0x10000e1 0x0f 0x32 0x2e 0x0b 0x0d 0x05 0x47 0x75 0x37 0x06 0x10 0x03 0x24 0x20 0x00 -+ 0x10000e2 0x0f 0x32 0x2e 0x0b 0x0d 0x05 0x47 0x75 0x37 0x06 0x10 0x03 0x24 0x20 0x00 -+ 0x1000011 -+ 0x1000029>; -+ }; -+ -+ piscreen_ts: piscreen-ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <17 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 17 0>; -+ ti,swap-xy; -+ ti,x-plate-ohms = /bits/ 16 <100>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ speed = <&piscreen>,"spi-max-frequency:0"; -+ rotate = <&piscreen>,"rotate:0"; -+ fps = <&piscreen>,"fps:0"; -+ debug = <&piscreen>,"debug:0"; -+ xohms = <&piscreen_ts>,"ti,x-plate-ohms;0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/piscreen2r-overlay.dts -@@ -0,0 +1,106 @@ -+ /* -+ * Device Tree overlay for PiScreen2 3.5" TFT with resistive touch by Ozzmaker.com -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ piscreen2_pins: piscreen2_pins { -+ brcm,pins = <17 25 24 22>; -+ brcm,function = <0 1 1 1>; /* in out out out */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ piscreen2: piscreen2@0{ -+ compatible = "ilitek,ili9486"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&piscreen2_pins>; -+ bgr; -+ spi-max-frequency = <64000000>; -+ rotate = <90>; -+ fps = <30>; -+ buswidth = <8>; -+ regwidth = <16>; -+ txbuflen = <32768>; -+ reset-gpios = <&gpio 25 0>; -+ dc-gpios = <&gpio 24 0>; -+ led-gpios = <&gpio 22 1>; -+ debug = <0>; -+ -+ init = <0x10000b0 0x00 -+ 0x1000011 -+ 0x20000ff -+ 0x100003a 0x55 -+ 0x1000036 0x28 -+ 0x10000c0 0x11 0x09 -+ 0x10000c1 0x41 -+ 0x10000c5 0x00 0x00 0x00 0x00 -+ 0x10000b6 0x00 0x02 -+ 0x10000f7 0xa9 0x51 0x2c 0x2 -+ 0x10000be 0x00 0x04 -+ 0x10000e9 0x00 -+ 0x1000011 -+ 0x1000029>; -+ -+ }; -+ -+ piscreen2_ts: piscreen2-ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <17 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 17 0>; -+ ti,swap-xy; -+ ti,x-plate-ohms = /bits/ 16 <100>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ speed = <&piscreen2>,"spi-max-frequency:0"; -+ rotate = <&piscreen2>,"rotate:0"; -+ fps = <&piscreen2>,"fps:0"; -+ debug = <&piscreen2>,"debug:0"; -+ xohms = <&piscreen2_ts>,"ti,x-plate-ohms;0"; -+ }; -+}; -+ ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pisound-overlay.dts -@@ -0,0 +1,114 @@ -+/* -+ * pisound Linux kernel module. -+ * Copyright (C) 2016 Vilniaus Blokas UAB, http://blokas.io/pisound -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; version 2 of the -+ * License. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+#include -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "blokaslabs,pisound"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ -+ pinctrl-0 = <&pisound_button_pins>; -+ -+ osr-gpios = -+ <&gpio 13 GPIO_ACTIVE_HIGH>, -+ <&gpio 26 GPIO_ACTIVE_HIGH>, -+ <&gpio 16 GPIO_ACTIVE_HIGH>; -+ -+ reset-gpios = -+ <&gpio 12 GPIO_ACTIVE_HIGH>, -+ <&gpio 24 GPIO_ACTIVE_HIGH>; -+ -+ data_available-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; -+ -+ button-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pisound_button_pins>; -+ -+ pisound_button_pins: pisound_button_pins { -+ brcm,pins = <17>; -+ brcm,function = <0>; // Input -+ brcm,pull = <2>; // Pull-Up -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "/"; -+ __overlay__ { -+ pcm5102a-codec { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5102a"; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ -+ spidev@0{ -+ status = "disabled"; -+ }; -+ -+ spidev@1{ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@5 { -+ target = <&spi0>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pisound_spi: pisound_spi@0{ -+ compatible = "blokaslabs,pisound-spi"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins>; -+ spi-max-frequency = <1000000>; -+ }; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pitft22-overlay.dts -@@ -0,0 +1,69 @@ -+/* -+ * Device Tree overlay for pitft by Adafruit -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ -+ spidev@0{ -+ status = "disabled"; -+ }; -+ -+ spidev@1{ -+ status = "disabled"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ pitft_pins: pitft_pins { -+ brcm,pins = <25>; -+ brcm,function = <1>; /* out */ -+ brcm,pull = <0>; /* none */ -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pitft: pitft@0{ -+ compatible = "ilitek,ili9340"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pitft_pins>; -+ -+ spi-max-frequency = <32000000>; -+ rotate = <90>; -+ fps = <25>; -+ bgr; -+ buswidth = <8>; -+ dc-gpios = <&gpio 25 0>; -+ debug = <0>; -+ }; -+ -+ }; -+ }; -+ -+ __overrides__ { -+ speed = <&pitft>,"spi-max-frequency:0"; -+ rotate = <&pitft>,"rotate:0"; -+ fps = <&pitft>,"fps:0"; -+ debug = <&pitft>,"debug:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts -@@ -0,0 +1,91 @@ -+/* -+ * Device Tree overlay for Adafruit PiTFT 2.8" capacitive touch screen -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ pitft_pins: pitft_pins { -+ brcm,pins = <24 25>; -+ brcm,function = <0 1>; /* in out */ -+ brcm,pull = <2 0>; /* pullup none */ -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pitft: pitft@0{ -+ compatible = "ilitek,ili9340"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pitft_pins>; -+ -+ spi-max-frequency = <32000000>; -+ rotate = <90>; -+ fps = <25>; -+ bgr; -+ buswidth = <8>; -+ dc-gpios = <&gpio 25 0>; -+ debug = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&i2c1>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ ft6236: ft6236@38 { -+ compatible = "focaltech,ft6236"; -+ reg = <0x38>; -+ -+ interrupt-parent = <&gpio>; -+ interrupts = <24 2>; -+ touchscreen-size-x = <240>; -+ touchscreen-size-y = <320>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ speed = <&pitft>,"spi-max-frequency:0"; -+ rotate = <&pitft>,"rotate:0"; -+ fps = <&pitft>,"fps:0"; -+ debug = <&pitft>,"debug:0"; -+ touch-sizex = <&ft6236>,"touchscreen-size-x?"; -+ touch-sizey = <&ft6236>,"touchscreen-size-y?"; -+ touch-invx = <&ft6236>,"touchscreen-inverted-x?"; -+ touch-invy = <&ft6236>,"touchscreen-inverted-y?"; -+ touch-swapxy = <&ft6236>,"touchscreen-swapped-x-y?"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts -@@ -0,0 +1,121 @@ -+/* -+ * Device Tree overlay for Adafruit PiTFT 2.8" resistive touch screen -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ pitft_pins: pitft_pins { -+ brcm,pins = <24 25>; -+ brcm,function = <0 1>; /* in out */ -+ brcm,pull = <2 0>; /* pullup none */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pitft: pitft@0{ -+ compatible = "ilitek,ili9340"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pitft_pins>; -+ -+ spi-max-frequency = <32000000>; -+ rotate = <90>; -+ fps = <25>; -+ bgr; -+ buswidth = <8>; -+ dc-gpios = <&gpio 25 0>; -+ debug = <0>; -+ }; -+ -+ pitft_ts@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "st,stmpe610"; -+ reg = <1>; -+ -+ spi-max-frequency = <500000>; -+ irq-gpio = <&gpio 24 0x2>; /* IRQF_TRIGGER_FALLING */ -+ interrupts = <24 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ -+ stmpe_touchscreen { -+ compatible = "st,stmpe-ts"; -+ st,sample-time = <4>; -+ st,mod-12b = <1>; -+ st,ref-sel = <0>; -+ st,adc-freq = <2>; -+ st,ave-ctrl = <3>; -+ st,touch-det-delay = <4>; -+ st,settling = <2>; -+ st,fraction-z = <7>; -+ st,i-drive = <0>; -+ }; -+ -+ stmpe_gpio: stmpe_gpio { -+ #gpio-cells = <2>; -+ compatible = "st,stmpe-gpio"; -+ /* -+ * only GPIO2 is wired/available -+ * and it is wired to the backlight -+ */ -+ st,norequest-mask = <0x7b>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@5 { -+ target-path = "/soc"; -+ __overlay__ { -+ backlight { -+ compatible = "gpio-backlight"; -+ gpios = <&stmpe_gpio 2 0>; -+ default-on; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ speed = <&pitft>,"spi-max-frequency:0"; -+ rotate = <&pitft>,"rotate:0"; -+ fps = <&pitft>,"fps:0"; -+ debug = <&pitft>,"debug:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts -@@ -0,0 +1,121 @@ -+/* -+ * Device Tree overlay for Adafruit PiTFT 3.5" resistive touch screen -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ pitft_pins: pitft_pins { -+ brcm,pins = <24 25>; -+ brcm,function = <0 1>; /* in out */ -+ brcm,pull = <2 0>; /* pullup none */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pitft: pitft@0{ -+ compatible = "himax,hx8357d"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pitft_pins>; -+ -+ spi-max-frequency = <32000000>; -+ rotate = <90>; -+ fps = <25>; -+ bgr; -+ buswidth = <8>; -+ dc-gpios = <&gpio 25 0>; -+ debug = <0>; -+ }; -+ -+ pitft_ts@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "st,stmpe610"; -+ reg = <1>; -+ -+ spi-max-frequency = <500000>; -+ irq-gpio = <&gpio 24 0x2>; /* IRQF_TRIGGER_FALLING */ -+ interrupts = <24 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ -+ stmpe_touchscreen { -+ compatible = "st,stmpe-ts"; -+ st,sample-time = <4>; -+ st,mod-12b = <1>; -+ st,ref-sel = <0>; -+ st,adc-freq = <2>; -+ st,ave-ctrl = <3>; -+ st,touch-det-delay = <4>; -+ st,settling = <2>; -+ st,fraction-z = <7>; -+ st,i-drive = <0>; -+ }; -+ -+ stmpe_gpio: stmpe_gpio { -+ #gpio-cells = <2>; -+ compatible = "st,stmpe-gpio"; -+ /* -+ * only GPIO2 is wired/available -+ * and it is wired to the backlight -+ */ -+ st,norequest-mask = <0x7b>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@5 { -+ target-path = "/soc"; -+ __overlay__ { -+ backlight { -+ compatible = "gpio-backlight"; -+ gpios = <&stmpe_gpio 2 0>; -+ default-on; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ speed = <&pitft>,"spi-max-frequency:0"; -+ rotate = <&pitft>,"rotate:0"; -+ fps = <&pitft>,"fps:0"; -+ debug = <&pitft>,"debug:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pps-gpio-overlay.dts -@@ -0,0 +1,35 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ pps: pps { -+ compatible = "pps-gpio"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pps_pins>; -+ gpios = <&gpio 18 0>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ pps_pins: pps_pins { -+ brcm,pins = <18>; -+ brcm,function = <0>; // in -+ brcm,pull = <0>; // off -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ gpiopin = <&pps>,"gpios:4", -+ <&pps_pins>,"brcm,pins:0"; -+ assert_falling_edge = <&pps>,"assert-falling-edge?"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts -@@ -0,0 +1,47 @@ -+/dts-v1/; -+/plugin/; -+ -+/* -+This is the 2-channel overlay - only use it if you need both channels. -+ -+Legal pin,function combinations for each channel: -+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) -+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) -+ -+N.B.: -+ 1) Pin 18 is the only one available on all platforms, and -+ it is the one used by the I2S audio interface. -+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. -+ 2) The onboard analogue audio output uses both PWM channels. -+ 3) So be careful mixing audio and PWM. -+*/ -+ -+/ { -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ pwm_pins: pwm_pins { -+ brcm,pins = <18 19>; -+ brcm,function = <2 2>; /* Alt5 */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&pwm>; -+ frag1: __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pwm_pins>; -+ assigned-clock-rates = <100000000>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ pin = <&pwm_pins>,"brcm,pins:0"; -+ pin2 = <&pwm_pins>,"brcm,pins:4"; -+ func = <&pwm_pins>,"brcm,function:0"; -+ func2 = <&pwm_pins>,"brcm,function:4"; -+ clock = <&frag1>,"assigned-clock-rates:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pwm-overlay.dts -@@ -0,0 +1,43 @@ -+/dts-v1/; -+/plugin/; -+ -+/* -+Legal pin,function combinations for each channel: -+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) -+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) -+ -+N.B.: -+ 1) Pin 18 is the only one available on all platforms, and -+ it is the one used by the I2S audio interface. -+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. -+ 2) The onboard analogue audio output uses both PWM channels. -+ 3) So be careful mixing audio and PWM. -+*/ -+ -+/ { -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ pwm_pins: pwm_pins { -+ brcm,pins = <18>; -+ brcm,function = <2>; /* Alt5 */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&pwm>; -+ frag1: __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pwm_pins>; -+ assigned-clock-rates = <100000000>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ pin = <&pwm_pins>,"brcm,pins:0"; -+ func = <&pwm_pins>,"brcm,function:0"; -+ clock = <&frag1>,"assigned-clock-rates:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/qca7000-overlay.dts -@@ -0,0 +1,52 @@ -+// Overlay for the Qualcomm Atheros QCA7000 on I2SE's PLC Stamp micro EVK -+// Visit: https://www.i2se.com/product/plc-stamp-micro-evk for details -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "okay"; -+ -+ spidev@0 { -+ status = "disabled"; -+ }; -+ -+ eth1: qca7000@0 { -+ compatible = "qca,qca7000"; -+ reg = <0>; /* CE0 */ -+ pinctrl-names = "default"; -+ pinctrl-0 = <ð1_pins>; -+ interrupt-parent = <&gpio>; -+ interrupts = <23 0x1>; /* rising edge */ -+ spi-max-frequency = <12000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ eth1_pins: eth1_pins { -+ brcm,pins = <23>; -+ brcm,function = <0>; /* in */ -+ brcm,pull = <0>; /* none */ -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ int_pin = <ð1>, "interrupts:0", -+ <ð1_pins>, "brcm,pins:0"; -+ speed = <ð1>, "spi-max-frequency:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/raspidac3-overlay.dts -@@ -0,0 +1,45 @@ -+// Definitions for RaspiDACv3 -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm5122@4c { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4c>; -+ status = "okay"; -+ }; -+ -+ tpa6130a2: tpa6130a2@60 { -+ compatible = "ti,tpa6130a2"; -+ reg = <0x60>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "jg,raspidacv3"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts -@@ -0,0 +1,21 @@ -+/* -+ * Devicetree overlay for mailbox-driven Raspberry Pi DSI Display -+ * backlight controller -+ */ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ rpi_backlight: rpi_backlight { -+ compatible = "raspberrypi,rpi-backlight"; -+ firmware = <&firmware>; -+ status = "okay"; -+ }; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-dac-overlay.dts -@@ -0,0 +1,34 @@ -+// Definitions for RPi DAC -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ pcm1794a-codec { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm1794a"; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "rpi,rpi-dac"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-display-overlay.dts -@@ -0,0 +1,89 @@ -+/* -+ * Device Tree overlay for rpi-display by Watterott -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ rpi_display_pins: rpi_display_pins { -+ brcm,pins = <18 23 24 25>; -+ brcm,function = <1 1 1 0>; /* out out out in */ -+ brcm,pull = <0 0 0 2>; /* - - - up */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ rpidisplay: rpi-display@0{ -+ compatible = "ilitek,ili9341"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&rpi_display_pins>; -+ -+ spi-max-frequency = <32000000>; -+ rotate = <270>; -+ bgr; -+ fps = <30>; -+ buswidth = <8>; -+ reset-gpios = <&gpio 23 0>; -+ dc-gpios = <&gpio 24 0>; -+ led-gpios = <&gpio 18 1>; -+ debug = <0>; -+ }; -+ -+ rpidisplay_ts: rpi-display-ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <25 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 25 0>; -+ ti,x-plate-ohms = /bits/ 16 <60>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ speed = <&rpidisplay>,"spi-max-frequency:0"; -+ rotate = <&rpidisplay>,"rotate:0"; -+ fps = <&rpidisplay>,"fps:0"; -+ debug = <&rpidisplay>,"debug:0"; -+ xohms = <&rpidisplay_ts>,"ti,x-plate-ohms;0"; -+ swapxy = <&rpidisplay_ts>,"ti,swap-xy?"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts -@@ -0,0 +1,17 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ rpi_ft5406: rpi_ft5406 { -+ compatible = "rpi,rpi-ft5406"; -+ firmware = <&firmware>; -+ status = "okay"; -+ }; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-proto-overlay.dts -@@ -0,0 +1,39 @@ -+// Definitions for Rpi-Proto -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ wm8731@1a { -+ #sound-dai-cells = <0>; -+ compatible = "wlf,wm8731"; -+ reg = <0x1a>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "rpi,rpi-proto"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-sense-overlay.dts -@@ -0,0 +1,47 @@ -+// rpi-sense HAT -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ rpi-sense@46 { -+ compatible = "rpi,rpi-sense"; -+ reg = <0x46>; -+ keys-int-gpios = <&gpio 23 1>; -+ status = "okay"; -+ }; -+ -+ lsm9ds1-magn@1c { -+ compatible = "st,lsm9ds1-magn"; -+ reg = <0x1c>; -+ status = "okay"; -+ }; -+ -+ lsm9ds1-accel6a { -+ compatible = "st,lsm9ds1-accel"; -+ reg = <0x6a>; -+ status = "okay"; -+ }; -+ -+ lps25h-press@5c { -+ compatible = "st,lps25h-press"; -+ reg = <0x5c>; -+ status = "okay"; -+ }; -+ -+ hts221-humid@5f { -+ compatible = "st,hts221-humid"; -+ reg = <0x5f>; -+ status = "okay"; -+ }; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts -@@ -0,0 +1,81 @@ -+// Definitions for RRA DigiDAC1 Audio card -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ aliases { -+ ldo0 = &ldo0; -+ ldo1 = &ldo1; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/soc"; -+ __overlay__ { -+ -+ ldo1: ldo1 { -+ compatible = "regulator-fixed"; -+ regulator-name = "DC_5V"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ }; -+ -+ ldo0: ldo0 { -+ compatible = "regulator-fixed"; -+ regulator-name = "DC_3V3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ wm8804@3b { -+ #sound-dai-cells = <0>; -+ compatible = "wlf,wm8804"; -+ reg = <0x3b>; -+ status = "okay"; -+ PVDD-supply = <&ldo0>; -+ DVDD-supply = <&ldo0>; -+ }; -+ -+ wm8742: wm8741@1a { -+ compatible = "wlf,wm8741"; -+ reg = <0x1a>; -+ status = "okay"; -+ AVDD-supply = <&ldo1>; -+ DVDD-supply = <&ldo0>; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "rra,digidac1-soundcard"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts -@@ -0,0 +1,37 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ sc16is750: sc16is750@48 { -+ compatible = "nxp,sc16is750"; -+ reg = <0x48>; /* address */ -+ clocks = <&sc16is750_clk>; -+ interrupt-parent = <&gpio>; -+ interrupts = <24 2>; /* IRQ_TYPE_EDGE_FALLING */ -+ #gpio-cells = <2>; -+ -+ sc16is750_clk: sc16is750_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <14745600>; -+ }; -+ }; -+ }; -+ }; -+ -+ -+ __overrides__ { -+ int_pin = <&sc16is750>,"interrupts:0"; -+ addr = <&sc16is750>,"reg:0"; -+ }; -+ -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts -@@ -0,0 +1,61 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ spi1_pins: spi1_pins { -+ brcm,pins = <19 20 21>; -+ brcm,function = <3>; /* alt4 */ -+ }; -+ -+ spi1_cs_pins: spi1_cs_pins { -+ brcm,pins = <18>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi1>; -+ frag1: __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi1_pins &spi1_cs_pins>; -+ cs-gpios = <&gpio 18 1>; -+ status = "okay"; -+ -+ sc16is752: sc16is752@0 { -+ compatible = "nxp,sc16is752"; -+ reg = <0>; /* CE0 */ -+ clocks = <&sc16is752_clk>; -+ interrupt-parent = <&gpio>; -+ interrupts = <24 2>; /* IRQ_TYPE_EDGE_FALLING */ -+ #gpio-controller; -+ #gpio-cells = <2>; -+ spi-max-frequency = <4000000>; -+ -+ sc16is752_clk: sc16is752_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <14745600>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&aux>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ int_pin = <&sc16is752>,"interrupts:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/sdhost-overlay.dts -@@ -0,0 +1,32 @@ -+/dts-v1/; -+/plugin/; -+ -+/* Provide backwards compatible aliases for the old sdhost dtparams. */ -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&sdhost>; -+ frag0: __overlay__ { -+ brcm,overclock-50 = <0>; -+ brcm,pio-limit = <1>; -+ brcm,debug-flags = <0>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&mmc>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ __overrides__ { -+ overclock_50 = <&frag0>,"brcm,overclock-50:0"; -+ force_pio = <&frag0>,"brcm,force-pio?"; -+ pio_limit = <&frag0>,"brcm,pio-limit:0"; -+ debug = <&frag0>,"brcm,debug?"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/sdio-1bit-overlay.dts -@@ -0,0 +1,36 @@ -+/* Enable 1-bit SDIO from MMC interface via GPIOs 22-25. Includes sdhost overlay. */ -+ -+/include/ "sdhost-overlay.dts" -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@3 { -+ target = <&mmc>; -+ sdio_mmc: __overlay__ { -+ compatible = "brcm,bcm2835-mmc"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdio_pins>; -+ non-removable; -+ bus-width = <1>; -+ brcm,overclock-50 = <0>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&gpio>; -+ __overlay__ { -+ sdio_pins: sdio_pins { -+ brcm,pins = <22 23 24 25>; -+ brcm,function = <7 7 7 7>; /* ALT3 = SD1 */ -+ brcm,pull = <0 2 2 2>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ poll_once = <&sdio_mmc>,"non-removable?"; -+ sdio_overclock = <&sdio_mmc>,"brcm,overclock-50:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/sdio-overlay.dts -@@ -0,0 +1,36 @@ -+/* Enable SDIO from MMC interface via GPIOs 22-27. Includes sdhost overlay. */ -+ -+/include/ "sdhost-overlay.dts" -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@3 { -+ target = <&mmc>; -+ sdio_mmc: __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdio_pins>; -+ non-removable; -+ bus-width = <4>; -+ brcm,overclock-50 = <0>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&gpio>; -+ __overlay__ { -+ sdio_pins: sdio_pins { -+ brcm,pins = <22 23 24 25 26 27>; -+ brcm,function = <7 7 7 7 7 7>; /* ALT3 = SD1 */ -+ brcm,pull = <0 2 2 2 2 2>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ poll_once = <&sdio_mmc>,"non-removable?"; -+ bus_width = <&sdio_mmc>,"bus-width:0"; -+ sdio_overclock = <&sdio_mmc>,"brcm,overclock-50:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/sdtweak-overlay.dts -@@ -0,0 +1,23 @@ -+/dts-v1/; -+/plugin/; -+ -+/* Provide backwards compatible aliases for the old sdhost dtparams. */ -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&sdhost>; -+ frag0: __overlay__ { -+ brcm,overclock-50 = <0>; -+ brcm,pio-limit = <1>; -+ }; -+ }; -+ -+ __overrides__ { -+ overclock_50 = <&frag0>,"brcm,overclock-50:0"; -+ force_pio = <&frag0>,"brcm,force-pio?"; -+ pio_limit = <&frag0>,"brcm,pio-limit:0"; -+ debug = <&frag0>,"brcm,debug?"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/smi-dev-overlay.dts -@@ -0,0 +1,18 @@ -+// Description: Overlay to enable character device interface for SMI. -+// Author: Luke Wren -+ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ fragment@0 { -+ target = <&soc>; -+ __overlay__ { -+ smi_dev { -+ compatible = "brcm,bcm2835-smi-dev"; -+ smi_handle = <&smi>; -+ status = "okay"; -+ }; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/smi-nand-overlay.dts -@@ -0,0 +1,69 @@ -+// Description: Overlay to enable NAND flash through -+// the secondary memory interface -+// Author: Luke Wren -+ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&smi>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&smi_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&soc>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ nand: flash@0 { -+ compatible = "brcm,bcm2835-smi-nand"; -+ smi_handle = <&smi>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ status = "okay"; -+ -+ partition@0 { -+ label = "stage2"; -+ // 128k -+ reg = <0 0x20000>; -+ read-only; -+ }; -+ partition@1 { -+ label = "firmware"; -+ // 16M -+ reg = <0x20000 0x1000000>; -+ read-only; -+ }; -+ partition@2 { -+ label = "root"; -+ // 2G (will need to use 64 bit for >=4G) -+ reg = <0x1020000 0x80000000>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ smi_pins: smi_pins { -+ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 -+ 12 13 14 15>; -+ /* Alt 1: SMI */ -+ brcm,function = <5 5 5 5 5 5 5 5 5 5 5 -+ 5 5 5 5 5>; -+ /* /CS, /WE and /OE are pulled high, as they are -+ generally active low signals */ -+ brcm,pull = <2 2 2 2 2 2 2 2 0 0 0 0 0 0 0 0>; -+ }; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/smi-overlay.dts -@@ -0,0 +1,37 @@ -+// Description: Overlay to enable the secondary memory interface peripheral -+// Author: Luke Wren -+ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&smi>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&smi_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ smi_pins: smi_pins { -+ /* Don't configure the top two address bits, as -+ these are already used as ID_SD and ID_SC */ -+ brcm,pins = <2 3 4 5 6 7 8 9 10 11 12 13 14 15 -+ 16 17 18 19 20 21 22 23 24 25>; -+ /* Alt 0: SMI */ -+ brcm,function = <5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 -+ 5 5 5 5 5 5 5 5 5>; -+ /* /CS, /WE and /OE are pulled high, as they are -+ generally active low signals */ -+ brcm,pull = <2 2 2 2 2 2 0 0 0 0 0 0 0 0 0 0 0 -+ 0 0 0 0 0 0 0>; -+ }; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts -@@ -0,0 +1,31 @@ -+/* -+ * Device tree overlay to move spi0 to gpio 35 to 39 on CM -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ cs-gpios = <&gpio 36 1>, <&gpio 35 1>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi0_cs_pins>; -+ __overlay__ { -+ brcm,pins = <36 35>; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spi0_pins>; -+ __overlay__ { -+ brcm,pins = <37 38 39>; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi-rtc-overlay.dts -@@ -0,0 +1,33 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&spidev0>; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ rtc-pcf2123@0 { -+ compatible = "nxp,rtc-pcf2123"; -+ spi-max-frequency = <5000000>; -+ spi-cs-high = <1>; -+ reg = <0>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ pcf2123 = <0>, "=0=1"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts -@@ -0,0 +1,26 @@ -+/* -+ * Device tree overlay to re-enable hardware CS for SPI0 -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ cs-gpios = <0>, <0>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi0_cs_pins>; -+ __overlay__ { -+ brcm,pins = <8 7>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts -@@ -0,0 +1,57 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ spi1_pins: spi1_pins { -+ brcm,pins = <19 20 21>; -+ brcm,function = <3>; /* alt4 */ -+ }; -+ -+ spi1_cs_pins: spi1_cs_pins { -+ brcm,pins = <18>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi1>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi1_pins &spi1_cs_pins>; -+ cs-gpios = <&gpio 18 1>; -+ status = "okay"; -+ -+ spidev1_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&aux>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs0_spidev = <&spidev1_0>,"status"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts -@@ -0,0 +1,69 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ spi1_pins: spi1_pins { -+ brcm,pins = <19 20 21>; -+ brcm,function = <3>; /* alt4 */ -+ }; -+ -+ spi1_cs_pins: spi1_cs_pins { -+ brcm,pins = <18 17>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi1>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi1_pins &spi1_cs_pins>; -+ cs-gpios = <&gpio 18 1>, <&gpio 17 1>; -+ status = "okay"; -+ -+ spidev1_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ }; -+ -+ spidev1_1: spidev@1 { -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&aux>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&spi1_cs_pins>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ cs0_spidev = <&spidev1_0>,"status"; -+ cs1_spidev = <&spidev1_1>,"status"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts -@@ -0,0 +1,81 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ spi1_pins: spi1_pins { -+ brcm,pins = <19 20 21>; -+ brcm,function = <3>; /* alt4 */ -+ }; -+ -+ spi1_cs_pins: spi1_cs_pins { -+ brcm,pins = <18 17 16>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi1>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi1_pins &spi1_cs_pins>; -+ cs-gpios = <&gpio 18 1>, <&gpio 17 1>, <&gpio 16 1>; -+ status = "okay"; -+ -+ spidev1_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ }; -+ -+ spidev1_1: spidev@1 { -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ }; -+ -+ spidev1_2: spidev@2 { -+ compatible = "spidev"; -+ reg = <2>; /* CE2 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&aux>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&spi1_cs_pins>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ cs2_pin = <&spi1_cs_pins>,"brcm,pins:8", -+ <&frag1>,"cs-gpios:28"; -+ cs0_spidev = <&spidev1_0>,"status"; -+ cs1_spidev = <&spidev1_1>,"status"; -+ cs2_spidev = <&spidev1_2>,"status"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts -@@ -0,0 +1,57 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ spi2_pins: spi2_pins { -+ brcm,pins = <40 41 42>; -+ brcm,function = <3>; /* alt4 */ -+ }; -+ -+ spi2_cs_pins: spi2_cs_pins { -+ brcm,pins = <43>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi2>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi2_pins &spi2_cs_pins>; -+ cs-gpios = <&gpio 43 1>; -+ status = "okay"; -+ -+ spidev2_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&aux>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs0_spidev = <&spidev2_0>,"status"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts -@@ -0,0 +1,69 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ spi2_pins: spi2_pins { -+ brcm,pins = <40 41 42>; -+ brcm,function = <3>; /* alt4 */ -+ }; -+ -+ spi2_cs_pins: spi2_cs_pins { -+ brcm,pins = <43 44>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi2>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi2_pins &spi2_cs_pins>; -+ cs-gpios = <&gpio 43 1>, <&gpio 44 1>; -+ status = "okay"; -+ -+ spidev2_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ }; -+ -+ spidev2_1: spidev@1 { -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&aux>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&spi2_cs_pins>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ cs0_spidev = <&spidev2_0>,"status"; -+ cs1_spidev = <&spidev2_1>,"status"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts -@@ -0,0 +1,81 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ spi2_pins: spi2_pins { -+ brcm,pins = <40 41 42>; -+ brcm,function = <3>; /* alt4 */ -+ }; -+ -+ spi2_cs_pins: spi2_cs_pins { -+ brcm,pins = <43 44 45>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi2>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi2_pins &spi2_cs_pins>; -+ cs-gpios = <&gpio 43 1>, <&gpio 44 1>, <&gpio 45 1>; -+ status = "okay"; -+ -+ spidev2_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ }; -+ -+ spidev2_1: spidev@1 { -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ }; -+ -+ spidev2_2: spidev@2 { -+ compatible = "spidev"; -+ reg = <2>; /* CE2 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&aux>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&spi2_cs_pins>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ cs2_pin = <&spi2_cs_pins>,"brcm,pins:8", -+ <&frag1>,"cs-gpios:28"; -+ cs0_spidev = <&spidev2_0>,"status"; -+ cs1_spidev = <&spidev2_1>,"status"; -+ cs2_spidev = <&spidev2_2>,"status"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts -@@ -0,0 +1,224 @@ -+/* -+ * tinylcd35-overlay.dts -+ * -+ * ------------------------------------------------- -+ * www.tinlylcd.com -+ * ------------------------------------------------- -+ * Device---Driver-----BUS GPIO's -+ * display tinylcd35 spi0.0 25 24 18 -+ * touch ads7846 spi0.1 5 -+ * rtc ds1307 i2c1-0068 -+ * rtc pcf8563 i2c1-0051 -+ * keypad gpio-keys --------- 17 22 27 23 28 -+ * -+ * -+ * TinyLCD.com 3.5 inch TFT -+ * -+ * Version 001 -+ * 5/3/2015 -- Noralf Trønnes Initial Device tree framework -+ * 10/3/2015 -- tinylcd@gmail.com added ds1307 support. -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ tinylcd35_pins: tinylcd35_pins { -+ brcm,pins = <25 24 18>; -+ brcm,function = <1>; /* out */ -+ }; -+ tinylcd35_ts_pins: tinylcd35_ts_pins { -+ brcm,pins = <5>; -+ brcm,function = <0>; /* in */ -+ }; -+ keypad_pins: keypad_pins { -+ brcm,pins = <4 17 22 23 27>; -+ brcm,function = <0>; /* in */ -+ brcm,pull = <1>; /* down */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ tinylcd35: tinylcd35@0{ -+ compatible = "neosec,tinylcd"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&tinylcd35_pins>, -+ <&tinylcd35_ts_pins>; -+ -+ spi-max-frequency = <48000000>; -+ rotate = <270>; -+ fps = <20>; -+ bgr; -+ buswidth = <8>; -+ reset-gpios = <&gpio 25 0>; -+ dc-gpios = <&gpio 24 0>; -+ led-gpios = <&gpio 18 1>; -+ debug = <0>; -+ -+ init = <0x10000B0 0x80 -+ 0x10000C0 0x0A 0x0A -+ 0x10000C1 0x01 0x01 -+ 0x10000C2 0x33 -+ 0x10000C5 0x00 0x42 0x80 -+ 0x10000B1 0xD0 0x11 -+ 0x10000B4 0x02 -+ 0x10000B6 0x00 0x22 0x3B -+ 0x10000B7 0x07 -+ 0x1000036 0x58 -+ 0x10000F0 0x36 0xA5 0xD3 -+ 0x10000E5 0x80 -+ 0x10000E5 0x01 -+ 0x10000B3 0x00 -+ 0x10000E5 0x00 -+ 0x10000F0 0x36 0xA5 0x53 -+ 0x10000E0 0x00 0x35 0x33 0x00 0x00 0x00 0x00 0x35 0x33 0x00 0x00 0x00 -+ 0x100003A 0x55 -+ 0x1000011 -+ 0x2000001 -+ 0x1000029>; -+ }; -+ -+ tinylcd35_ts: tinylcd35_ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ status = "disabled"; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <5 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 5 0>; -+ ti,x-plate-ohms = /bits/ 16 <100>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ -+ /* RTC */ -+ -+ fragment@5 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "okay"; -+ -+ pcf8563: pcf8563@51 { -+ compatible = "nxp,pcf8563"; -+ reg = <0x51>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@6 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "okay"; -+ -+ ds1307: ds1307@68 { -+ compatible = "maxim,ds1307"; -+ reg = <0x68>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ /* -+ * Values for input event code is found under the -+ * 'Keys and buttons' heading in include/uapi/linux/input.h -+ */ -+ fragment@7 { -+ target-path = "/soc"; -+ __overlay__ { -+ keypad: keypad { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&keypad_pins>; -+ status = "disabled"; -+ autorepeat; -+ -+ button@17 { -+ label = "GPIO KEY_UP"; -+ linux,code = <103>; -+ gpios = <&gpio 17 0>; -+ }; -+ button@22 { -+ label = "GPIO KEY_DOWN"; -+ linux,code = <108>; -+ gpios = <&gpio 22 0>; -+ }; -+ button@27 { -+ label = "GPIO KEY_LEFT"; -+ linux,code = <105>; -+ gpios = <&gpio 27 0>; -+ }; -+ button@23 { -+ label = "GPIO KEY_RIGHT"; -+ linux,code = <106>; -+ gpios = <&gpio 23 0>; -+ }; -+ button@4 { -+ label = "GPIO KEY_ENTER"; -+ linux,code = <28>; -+ gpios = <&gpio 4 0>; -+ }; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ speed = <&tinylcd35>,"spi-max-frequency:0"; -+ rotate = <&tinylcd35>,"rotate:0"; -+ fps = <&tinylcd35>,"fps:0"; -+ debug = <&tinylcd35>,"debug:0"; -+ touch = <&tinylcd35_ts>,"status"; -+ touchgpio = <&tinylcd35_ts_pins>,"brcm,pins:0", -+ <&tinylcd35_ts>,"interrupts:0", -+ <&tinylcd35_ts>,"pendown-gpio:4"; -+ xohms = <&tinylcd35_ts>,"ti,x-plate-ohms;0"; -+ rtc-pcf = <0>,"=5"; -+ rtc-ds = <0>,"=6"; -+ keypad = <&keypad>,"status"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/uart1-overlay.dts -@@ -0,0 +1,38 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&uart1>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ uart1_pins: uart1_pins { -+ brcm,pins = <14 15>; -+ brcm,function = <2>; /* alt5 */ -+ brcm,pull = <0 2>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "/chosen"; -+ __overlay__ { -+ bootargs = "8250.nr_uarts=1"; -+ }; -+ }; -+ -+ __overrides__ { -+ txd1_pin = <&uart1_pins>,"brcm,pins:0"; -+ rxd1_pin = <&uart1_pins>,"brcm,pins:4"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts -@@ -0,0 +1,89 @@ -+/* -+ * vc4-fkms-v3d-overlay.dts -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target-path = "/chosen"; -+ __overlay__ { -+ bootargs = "cma=256M@256M"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=192M@256M"; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=128M@128M"; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=96M@128M"; -+ }; -+ }; -+ -+ fragment@4 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=64M@64M"; -+ }; -+ }; -+ -+ fragment@5 { -+ target = <&fb>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@6 { -+ target = <&firmwarekms>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@7 { -+ target = <&v3d>; -+ __overlay__ { -+ interrupts = <1 10>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@8 { -+ target = <&gpu>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@9 { -+ target-path = "/soc/dma"; -+ __overlay__ { -+ brcm,dma-channel-mask = <0x7f35>; -+ }; -+ }; -+ -+ __overrides__ { -+ cma-256 = <0>,"+0-1-2-3-4"; -+ cma-192 = <0>,"-0+1-2-3-4"; -+ cma-128 = <0>,"-0-1+2-3-4"; -+ cma-96 = <0>,"-0-1-2+3-4"; -+ cma-64 = <0>,"-0-1-2-3+4"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts -@@ -0,0 +1,136 @@ -+/* -+ * vc4-kms-v3d-overlay.dts -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target-path = "/chosen"; -+ __overlay__ { -+ bootargs = "cma=256M@256M"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=192M@256M"; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=128M@128M"; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=96M@128M"; -+ }; -+ }; -+ -+ fragment@4 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=64M@64M"; -+ }; -+ }; -+ -+ fragment@5 { -+ target = <&i2c2>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@6 { -+ target = <&cprman>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@7 { -+ target = <&fb>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@8 { -+ target = <&pixelvalve0>; -+ __overlay__ { -+ interrupts = <2 13>; /* pwa0 */ -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@9 { -+ target = <&pixelvalve1>; -+ __overlay__ { -+ interrupts = <2 14>; /* pwa1 */ -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@10 { -+ target = <&pixelvalve2>; -+ __overlay__ { -+ interrupts = <2 10>; /* pixelvalve */ -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@11 { -+ target = <&hvs>; -+ __overlay__ { -+ interrupts = <2 1>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@12 { -+ target = <&hdmi>; -+ __overlay__ { -+ interrupts = <2 8>, <2 9>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@13 { -+ target = <&v3d>; -+ __overlay__ { -+ interrupts = <1 10>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@14 { -+ target = <&gpu>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@15 { -+ target-path = "/soc/dma"; -+ __overlay__ { -+ brcm,dma-channel-mask = <0x7f35>; -+ }; -+ }; -+ -+ __overrides__ { -+ cma-256 = <0>,"+0-1-2-3-4"; -+ cma-192 = <0>,"-0+1-2-3-4"; -+ cma-128 = <0>,"-0-1+2-3-4"; -+ cma-96 = <0>,"-0-1-2+3-4"; -+ cma-64 = <0>,"-0-1-2-3+4"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/vga666-overlay.dts -@@ -0,0 +1,30 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ // There is no VGA driver module, but we need a platform device -+ // node (that doesn't already use pinctrl) to hang the pinctrl -+ // reference on - leds will do -+ -+ fragment@0 { -+ target = <&leds>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&vga666_pins>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ vga666_pins: vga666_pins { -+ brcm,pins = <2 3 4 5 6 7 8 9 10 11 12 -+ 13 14 15 16 17 18 19 20 21>; -+ brcm,function = <6>; /* alt2 */ -+ brcm,pull = <0>; /* no pull */ -+ }; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts -@@ -0,0 +1,39 @@ -+// Definitions for w1-gpio module (without external pullup) -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ -+ w1: onewire@0 { -+ compatible = "w1-gpio"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&w1_pins>; -+ gpios = <&gpio 4 0>; -+ rpi,parasitic-power = <0>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ w1_pins: w1_pins { -+ brcm,pins = <4>; -+ brcm,function = <0>; // in (initially) -+ brcm,pull = <0>; // off -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ gpiopin = <&w1>,"gpios:4", -+ <&w1_pins>,"brcm,pins:0"; -+ pullup = <&w1>,"rpi,parasitic-power:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts -@@ -0,0 +1,41 @@ -+// Definitions for w1-gpio module (with external pullup) -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ -+ w1: onewire@0 { -+ compatible = "w1-gpio"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&w1_pins>; -+ gpios = <&gpio 4 0>, <&gpio 5 1>; -+ rpi,parasitic-power = <0>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ w1_pins: w1_pins { -+ brcm,pins = <4 5>; -+ brcm,function = <0 1>; // in out -+ brcm,pull = <0 0>; // off off -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ gpiopin = <&w1>,"gpios:4", -+ <&w1_pins>,"brcm,pins:0"; -+ extpullup = <&w1>,"gpios:16", -+ <&w1_pins>,"brcm,pins:4"; -+ pullup = <&w1>,"rpi,parasitic-power:0"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/wittypi-overlay.dts -@@ -0,0 +1,44 @@ -+/* -+ * Device Tree overlay for Witty Pi extension board by UUGear -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&leds>; -+ __overlay__ { -+ compatible = "gpio-leds"; -+ wittypi_led: wittypi_led { -+ label = "wittypi_led"; -+ linux,default-trigger = "default-on"; -+ gpios = <&gpio 17 0>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ rtc: ds1337@68 { -+ compatible = "dallas,ds1337"; -+ reg = <0x68>; -+ wakeup-source; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ led_gpio = <&wittypi_led>,"gpios:4"; -+ led_trigger = <&wittypi_led>,"linux,default-trigger"; -+ }; -+ -+}; ---- a/scripts/Makefile.dtbinst -+++ b/scripts/Makefile.dtbinst -@@ -27,6 +27,7 @@ ifeq ("$(dtbinst-root)", "$(obj)") - endif - - dtbinst-files := $(dtb-y) -+dtboinst-files := $(dtbo-y) - dtbinst-dirs := $(dts-dirs) - - # Helper targets for Installing DTBs into the boot directory -@@ -35,15 +36,18 @@ quiet_cmd_dtb_install = INSTALL $< - - install-dir = $(patsubst $(dtbinst-root)%,$(INSTALL_DTBS_PATH)%,$(obj)) - --$(dtbinst-files) $(dtbinst-dirs): | __dtbs_install_prep -+$(dtbinst-files) $(dtboinst-files) $(dtbinst-dirs): | __dtbs_install_prep - - $(dtbinst-files): %.dtb: $(obj)/%.dtb - $(call cmd,dtb_install,$(install-dir)) - -+$(dtboinst-files): %.dtbo: $(obj)/%.dtbo -+ $(call cmd,dtb_install,$(install-dir)) -+ - $(dtbinst-dirs): - $(Q)$(MAKE) $(dtbinst)=$(obj)/$@ - --PHONY += $(dtbinst-files) $(dtbinst-dirs) --__dtbs_install: $(dtbinst-files) $(dtbinst-dirs) -+PHONY += $(dtbinst-files) $(dtboinst-files) $(dtbinst-dirs) -+__dtbs_install: $(dtbinst-files) $(dtboinst-files) $(dtbinst-dirs) - - .PHONY: $(PHONY) ---- a/scripts/Makefile.lib -+++ b/scripts/Makefile.lib -@@ -312,6 +312,17 @@ cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \ - $(obj)/%.dtb: $(src)/%.dts FORCE - $(call if_changed_dep,dtc) - -+quiet_cmd_dtco = DTCO $@ -+cmd_dtco = mkdir -p $(dir ${dtc-tmp}) ; \ -+ $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ -+ $(DTC) -@ -H epapr -O dtb -o $@ -b 0 \ -+ -i $(dir $<) $(DTC_FLAGS) \ -+ -d $(depfile).dtc.tmp $(dtc-tmp) ; \ -+ cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) -+ -+$(obj)/%.dtbo: $(src)/%-overlay.dts FORCE -+ $(call if_changed_dep,dtco) -+ - dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) - - # Bzip2 diff --git a/target/linux/brcm2708/patches-4.9/0055-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch b/target/linux/brcm2708/patches-4.9/0055-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch deleted file mode 100644 index 725ac70e4418..000000000000 --- a/target/linux/brcm2708/patches-4.9/0055-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch +++ /dev/null @@ -1,166 +0,0 @@ -From 766357a4f8476461035dcfe2c6b43f532366f533 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 6 Feb 2015 13:50:57 +0000 -Subject: [PATCH] BCM270x_DT: Add pwr_led, and the required "input" trigger - -The "input" trigger makes the associated GPIO an input. This is to support -the Raspberry Pi PWR LED, which is driven by external hardware in normal use. - -N.B. pwr_led is not available on Model A or B boards. - -leds-gpio: Implement the brightness_get method - -The power LED uses some clever logic that means it is driven -by a voltage measuring circuit when configured as input, otherwise -it is driven by the GPIO output value. This patch wires up the -brightness_get method for leds-gpio so that user-space can monitor -the LED value via /sys/class/gpio/led1/brightness. Using the input -trigger this returns an indication of the system power health, -otherwise it is just whatever value the trigger has written most -recently. - -See: https://github.com/raspberrypi/linux/issues/1064 ---- - drivers/leds/leds-gpio.c | 18 +++++++++++- - drivers/leds/trigger/Kconfig | 7 +++++ - drivers/leds/trigger/Makefile | 1 + - drivers/leds/trigger/ledtrig-input.c | 54 ++++++++++++++++++++++++++++++++++++ - include/linux/leds.h | 3 ++ - 5 files changed, 82 insertions(+), 1 deletion(-) - create mode 100644 drivers/leds/trigger/ledtrig-input.c - ---- a/drivers/leds/leds-gpio.c -+++ b/drivers/leds/leds-gpio.c -@@ -50,8 +50,15 @@ static void gpio_led_set(struct led_clas - led_dat->platform_gpio_blink_set(led_dat->gpiod, level, - NULL, NULL); - led_dat->blinking = 0; -+ } else if (led_dat->cdev.flags & SET_GPIO_INPUT) { -+ gpiod_direction_input(led_dat->gpiod); -+ led_dat->cdev.flags &= ~SET_GPIO_INPUT; -+ } else if (led_dat->cdev.flags & SET_GPIO_OUTPUT) { -+ gpiod_direction_output(led_dat->gpiod, level); -+ led_dat->cdev.flags &= ~SET_GPIO_OUTPUT; - } else { -- if (led_dat->can_sleep) -+ if (led_dat->can_sleep || -+ (led_dat->cdev.flags & (SET_GPIO_INPUT | SET_GPIO_OUTPUT) )) - gpiod_set_value_cansleep(led_dat->gpiod, level); - else - gpiod_set_value(led_dat->gpiod, level); -@@ -65,6 +72,13 @@ static int gpio_led_set_blocking(struct - return 0; - } - -+static enum led_brightness gpio_led_get(struct led_classdev *led_cdev) -+{ -+ struct gpio_led_data *led_dat = -+ container_of(led_cdev, struct gpio_led_data, cdev); -+ return gpiod_get_value_cansleep(led_dat->gpiod) ? LED_FULL : LED_OFF; -+} -+ - static int gpio_blink_set(struct led_classdev *led_cdev, - unsigned long *delay_on, unsigned long *delay_off) - { -@@ -122,6 +136,8 @@ static int create_gpio_led(const struct - led_dat->platform_gpio_blink_set = blink_set; - led_dat->cdev.blink_set = gpio_blink_set; - } -+ led_dat->cdev.brightness_set = gpio_led_set; -+ led_dat->cdev.brightness_get = gpio_led_get; - if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP) { - state = gpiod_get_value_cansleep(led_dat->gpiod); - if (state < 0) ---- a/drivers/leds/trigger/Kconfig -+++ b/drivers/leds/trigger/Kconfig -@@ -116,6 +116,13 @@ config LEDS_TRIGGER_CAMERA - This enables direct flash/torch on/off by the driver, kernel space. - If unsure, say Y. - -+config LEDS_TRIGGER_INPUT -+ tristate "LED Input Trigger" -+ depends on LEDS_TRIGGERS -+ help -+ This allows the GPIOs assigned to be LEDs to be initialised to inputs. -+ If unsure, say Y. -+ - config LEDS_TRIGGER_PANIC - bool "LED Panic Trigger" - depends on LEDS_TRIGGERS ---- a/drivers/leds/trigger/Makefile -+++ b/drivers/leds/trigger/Makefile -@@ -9,4 +9,5 @@ obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtr - obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o - obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) += ledtrig-transient.o - obj-$(CONFIG_LEDS_TRIGGER_CAMERA) += ledtrig-camera.o -+obj-$(CONFIG_LEDS_TRIGGER_INPUT) += ledtrig-input.o - obj-$(CONFIG_LEDS_TRIGGER_PANIC) += ledtrig-panic.o ---- /dev/null -+++ b/drivers/leds/trigger/ledtrig-input.c -@@ -0,0 +1,54 @@ -+/* -+ * Set LED GPIO to Input "Trigger" -+ * -+ * Copyright 2015 Phil Elwell -+ * -+ * Based on Nick Forbes's ledtrig-default-on.c. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include "../leds.h" -+ -+static void input_trig_activate(struct led_classdev *led_cdev) -+{ -+ led_cdev->flags |= SET_GPIO_INPUT; -+ led_set_brightness(led_cdev, 0); -+} -+ -+static void input_trig_deactivate(struct led_classdev *led_cdev) -+{ -+ led_cdev->flags |= SET_GPIO_OUTPUT; -+ led_set_brightness(led_cdev, 0); -+} -+ -+static struct led_trigger input_led_trigger = { -+ .name = "input", -+ .activate = input_trig_activate, -+ .deactivate = input_trig_deactivate, -+}; -+ -+static int __init input_trig_init(void) -+{ -+ return led_trigger_register(&input_led_trigger); -+} -+ -+static void __exit input_trig_exit(void) -+{ -+ led_trigger_unregister(&input_led_trigger); -+} -+ -+module_init(input_trig_init); -+module_exit(input_trig_exit); -+ -+MODULE_AUTHOR("Phil Elwell "); -+MODULE_DESCRIPTION("Set LED GPIO to Input \"trigger\""); -+MODULE_LICENSE("GPL"); ---- a/include/linux/leds.h -+++ b/include/linux/leds.h -@@ -52,6 +52,9 @@ struct led_classdev { - #define LED_DEV_CAP_FLASH (1 << 24) - #define LED_HW_PLUGGABLE (1 << 25) - #define LED_PANIC_INDICATOR (1 << 26) -+ /* Additions for Raspberry Pi PWR LED */ -+#define SET_GPIO_INPUT (1 << 30) -+#define SET_GPIO_OUTPUT (1 << 31) - - /* Set LED brightness level - * Must not sleep. Use brightness_set_blocking for drivers diff --git a/target/linux/brcm2708/patches-4.9/0056-fbdev-add-FBIOCOPYAREA-ioctl.patch b/target/linux/brcm2708/patches-4.9/0056-fbdev-add-FBIOCOPYAREA-ioctl.patch deleted file mode 100644 index 34346903da6f..000000000000 --- a/target/linux/brcm2708/patches-4.9/0056-fbdev-add-FBIOCOPYAREA-ioctl.patch +++ /dev/null @@ -1,248 +0,0 @@ -From 65422160b21224e6d26641a4c1fa3082c0281488 Mon Sep 17 00:00:00 2001 -From: Siarhei Siamashka -Date: Mon, 17 Jun 2013 13:32:11 +0300 -Subject: [PATCH] fbdev: add FBIOCOPYAREA ioctl - -Based on the patch authored by Ali Gholami Rudi at - https://lkml.org/lkml/2009/7/13/153 - -Provide an ioctl for userspace applications, but only if this operation -is hardware accelerated (otherwide it does not make any sense). - -Signed-off-by: Siarhei Siamashka - -bcm2708_fb: Add ioctl for reading gpu memory through dma ---- - drivers/video/fbdev/bcm2708_fb.c | 109 +++++++++++++++++++++++++++++++++++++++ - drivers/video/fbdev/core/fbmem.c | 36 +++++++++++++ - include/uapi/linux/fb.h | 12 +++++ - 3 files changed, 157 insertions(+) - ---- a/drivers/video/fbdev/bcm2708_fb.c -+++ b/drivers/video/fbdev/bcm2708_fb.c -@@ -31,8 +31,10 @@ - #include - #include - #include -+#include - #include - #include -+#include - #include - - //#define BCM2708_FB_DEBUG -@@ -426,6 +428,110 @@ static int bcm2708_fb_pan_display(struct - return result; - } - -+static void dma_memcpy(struct bcm2708_fb *fb, dma_addr_t dst, dma_addr_t src, int size) -+{ -+ int burst_size = (fb->dma_chan == 0) ? 8 : 2; -+ struct bcm2708_dma_cb *cb = fb->cb_base; -+ -+ cb->info = BCM2708_DMA_BURST(burst_size) | BCM2708_DMA_S_WIDTH | -+ BCM2708_DMA_S_INC | BCM2708_DMA_D_WIDTH | -+ BCM2708_DMA_D_INC; -+ cb->dst = dst; -+ cb->src = src; -+ cb->length = size; -+ cb->stride = 0; -+ cb->pad[0] = 0; -+ cb->pad[1] = 0; -+ cb->next = 0; -+ -+ if (size < dma_busy_wait_threshold) { -+ bcm_dma_start(fb->dma_chan_base, fb->cb_handle); -+ bcm_dma_wait_idle(fb->dma_chan_base); -+ } else { -+ void __iomem *dma_chan = fb->dma_chan_base; -+ cb->info |= BCM2708_DMA_INT_EN; -+ bcm_dma_start(fb->dma_chan_base, fb->cb_handle); -+ while (bcm_dma_is_busy(dma_chan)) { -+ wait_event_interruptible( -+ fb->dma_waitq, -+ !bcm_dma_is_busy(dma_chan)); -+ } -+ fb->stats.dma_irqs++; -+ } -+ fb->stats.dma_copies++; -+} -+ -+#define INTALIAS_NORMAL(x) ((x)&~0xc0000000) // address with no aliases -+#define INTALIAS_L1L2_NONALLOCATING(x) (((x)&~0xc0000000)|0x80000000) // cache coherent but non-allocating in L1 and L2 -+ -+static long vc_mem_copy(struct bcm2708_fb *fb, unsigned long arg) -+{ -+ struct fb_dmacopy ioparam; -+ size_t size = PAGE_SIZE; -+ u32 *buf = NULL; -+ dma_addr_t bus_addr; -+ long rc = 0; -+ size_t offset; -+ struct { u32 base, length; } gpu = {}; -+ -+ /* restrict this to root user */ -+ if (!uid_eq(current_euid(), GLOBAL_ROOT_UID)) -+ { -+ rc = -EFAULT; -+ goto out; -+ } -+ -+ /* Get the parameter data. -+ */ -+ if (copy_from_user -+ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { -+ pr_err("[%s]: failed to copy-from-user\n", -+ __func__); -+ rc = -EFAULT; -+ goto out; -+ } -+ -+ rc = rpi_firmware_property(fb->fw, -+ RPI_FIRMWARE_GET_VC_MEMORY, -+ &gpu, sizeof(gpu)); -+ if (rc != 0 || gpu.base == 0 || gpu.length == 0) { -+ pr_err("[%s]: Unable to determine gpu memory %ld,%x,%x)\n", __func__, rc, gpu.base, gpu.length); -+ return -EFAULT; -+ } -+ -+ if (INTALIAS_NORMAL(ioparam.src) < gpu.base || INTALIAS_NORMAL(ioparam.src) >= gpu.base + gpu.length) { -+ pr_err("[%s]: Invalid memory access %x (%x-%x)", __func__, INTALIAS_NORMAL(ioparam.src), gpu.base, gpu.base + gpu.length); -+ return -EFAULT; -+ } -+ -+ buf = dma_alloc_coherent(fb->fb.device, PAGE_ALIGN(size), &bus_addr, -+ GFP_ATOMIC); -+ if (!buf) { -+ pr_err("[%s]: failed to dma_alloc_coherent(%d)\n", -+ __func__, size); -+ rc = -ENOMEM; -+ goto out; -+ } -+ -+ for (offset = 0; offset < ioparam.length; offset += size) { -+ size_t remaining = ioparam.length - offset; -+ size_t s = min(size, remaining); -+ unsigned char *p = (unsigned char *)ioparam.src + offset; -+ unsigned char *q = (unsigned char *)ioparam.dst + offset; -+ dma_memcpy(fb, bus_addr, INTALIAS_L1L2_NONALLOCATING((dma_addr_t)p), size); -+ if (copy_to_user(q, buf, s) != 0) { -+ pr_err("[%s]: failed to copy-to-user\n", -+ __func__); -+ rc = -EFAULT; -+ goto out; -+ } -+ } -+out: -+ if (buf) -+ dma_free_coherent(fb->fb.device, PAGE_ALIGN(size), buf, bus_addr); -+ return rc; -+} -+ - static int bcm2708_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg) - { - struct bcm2708_fb *fb = to_bcm2708(info); -@@ -438,6 +544,9 @@ static int bcm2708_ioctl(struct fb_info - RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC, - &dummy, sizeof(dummy)); - break; -+ case FBIODMACOPY: -+ ret = vc_mem_copy(fb, arg); -+ break; - default: - dev_dbg(info->device, "Unknown ioctl 0x%x\n", cmd); - return -ENOTTY; ---- a/drivers/video/fbdev/core/fbmem.c -+++ b/drivers/video/fbdev/core/fbmem.c -@@ -1084,6 +1084,31 @@ fb_blank(struct fb_info *info, int blank - } - EXPORT_SYMBOL(fb_blank); - -+static int fb_copyarea_user(struct fb_info *info, -+ struct fb_copyarea *copy) -+{ -+ int ret = 0; -+ if (!lock_fb_info(info)) -+ return -ENODEV; -+ if (copy->dx >= info->var.xres || -+ copy->sx >= info->var.xres || -+ copy->width > info->var.xres || -+ copy->dy >= info->var.yres || -+ copy->sy >= info->var.yres || -+ copy->height > info->var.yres || -+ copy->dx + copy->width > info->var.xres || -+ copy->sx + copy->width > info->var.xres || -+ copy->dy + copy->height > info->var.yres || -+ copy->sy + copy->height > info->var.yres) { -+ ret = -EINVAL; -+ goto out; -+ } -+ info->fbops->fb_copyarea(info, copy); -+out: -+ unlock_fb_info(info); -+ return ret; -+} -+ - static long do_fb_ioctl(struct fb_info *info, unsigned int cmd, - unsigned long arg) - { -@@ -1094,6 +1119,7 @@ static long do_fb_ioctl(struct fb_info * - struct fb_cmap cmap_from; - struct fb_cmap_user cmap; - struct fb_event event; -+ struct fb_copyarea copy; - void __user *argp = (void __user *)arg; - long ret = 0; - -@@ -1211,6 +1237,15 @@ static long do_fb_ioctl(struct fb_info * - unlock_fb_info(info); - console_unlock(); - break; -+ case FBIOCOPYAREA: -+ if (info->flags & FBINFO_HWACCEL_COPYAREA) { -+ /* only provide this ioctl if it is accelerated */ -+ if (copy_from_user(©, argp, sizeof(copy))) -+ return -EFAULT; -+ ret = fb_copyarea_user(info, ©); -+ break; -+ } -+ /* fall through */ - default: - if (!lock_fb_info(info)) - return -ENODEV; -@@ -1365,6 +1400,7 @@ static long fb_compat_ioctl(struct file - case FBIOPAN_DISPLAY: - case FBIOGET_CON2FBMAP: - case FBIOPUT_CON2FBMAP: -+ case FBIOCOPYAREA: - arg = (unsigned long) compat_ptr(arg); - case FBIOBLANK: - ret = do_fb_ioctl(info, cmd, arg); ---- a/include/uapi/linux/fb.h -+++ b/include/uapi/linux/fb.h -@@ -34,6 +34,12 @@ - #define FBIOPUT_MODEINFO 0x4617 - #define FBIOGET_DISPINFO 0x4618 - #define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32) -+/* -+ * HACK: use 'z' in order not to clash with any other ioctl numbers which might -+ * be concurrently added to the mainline kernel -+ */ -+#define FBIOCOPYAREA _IOW('z', 0x21, struct fb_copyarea) -+#define FBIODMACOPY _IOW('z', 0x22, struct fb_dmacopy) - - #define FB_TYPE_PACKED_PIXELS 0 /* Packed Pixels */ - #define FB_TYPE_PLANES 1 /* Non interleaved planes */ -@@ -346,6 +352,12 @@ struct fb_copyarea { - __u32 sy; - }; - -+struct fb_dmacopy { -+ void *dst; -+ __u32 src; -+ __u32 length; -+}; -+ - struct fb_fillrect { - __u32 dx; /* screen-relative */ - __u32 dy; diff --git a/target/linux/brcm2708/patches-4.9/0057-Speed-up-console-framebuffer-imageblit-function.patch b/target/linux/brcm2708/patches-4.9/0057-Speed-up-console-framebuffer-imageblit-function.patch deleted file mode 100644 index 8d6337a94dfd..000000000000 --- a/target/linux/brcm2708/patches-4.9/0057-Speed-up-console-framebuffer-imageblit-function.patch +++ /dev/null @@ -1,209 +0,0 @@ -From fead9bc9e55df547b54a9cd55d932b209090cfeb Mon Sep 17 00:00:00 2001 -From: Harm Hanemaaijer -Date: Thu, 20 Jun 2013 20:21:39 +0200 -Subject: [PATCH] Speed up console framebuffer imageblit function - -Especially on platforms with a slower CPU but a relatively high -framebuffer fill bandwidth, like current ARM devices, the existing -console monochrome imageblit function used to draw console text is -suboptimal for common pixel depths such as 16bpp and 32bpp. The existing -code is quite general and can deal with several pixel depths. By creating -special case functions for 16bpp and 32bpp, by far the most common pixel -formats used on modern systems, a significant speed-up is attained -which can be readily felt on ARM-based devices like the Raspberry Pi -and the Allwinner platform, but should help any platform using the -fb layer. - -The special case functions allow constant folding, eliminating a number -of instructions including divide operations, and allow the use of an -unrolled loop, eliminating instructions with a variable shift size, -reducing source memory access instructions, and eliminating excessive -branching. These unrolled loops also allow much better code optimization -by the C compiler. The code that selects which optimized variant is used -is also simplified, eliminating integer divide instructions. - -The speed-up, measured by timing 'cat file.txt' in the console, varies -between 40% and 70%, when testing on the Raspberry Pi and Allwinner -ARM-based platforms, depending on font size and the pixel depth, with -the greater benefit for 32bpp. - -Signed-off-by: Harm Hanemaaijer ---- - drivers/video/fbdev/core/cfbimgblt.c | 152 +++++++++++++++++++++++++++++++++-- - 1 file changed, 147 insertions(+), 5 deletions(-) - ---- a/drivers/video/fbdev/core/cfbimgblt.c -+++ b/drivers/video/fbdev/core/cfbimgblt.c -@@ -28,6 +28,11 @@ - * - * Also need to add code to deal with cards endians that are different than - * the native cpu endians. I also need to deal with MSB position in the word. -+ * Modified by Harm Hanemaaijer (fgenfb@yahoo.com) 2013: -+ * - Provide optimized versions of fast_imageblit for 16 and 32bpp that are -+ * significantly faster than the previous implementation. -+ * - Simplify the fast/slow_imageblit selection code, avoiding integer -+ * divides. - */ - #include - #include -@@ -262,6 +267,133 @@ static inline void fast_imageblit(const - } - } - -+/* -+ * Optimized fast_imageblit for bpp == 16. ppw = 2, bit_mask = 3 folded -+ * into the code, main loop unrolled. -+ */ -+ -+static inline void fast_imageblit16(const struct fb_image *image, -+ struct fb_info *p, u8 __iomem * dst1, -+ u32 fgcolor, u32 bgcolor) -+{ -+ u32 fgx = fgcolor, bgx = bgcolor; -+ u32 spitch = (image->width + 7) / 8; -+ u32 end_mask, eorx; -+ const char *s = image->data, *src; -+ u32 __iomem *dst; -+ const u32 *tab = NULL; -+ int i, j, k; -+ -+ tab = fb_be_math(p) ? cfb_tab16_be : cfb_tab16_le; -+ -+ fgx <<= 16; -+ bgx <<= 16; -+ fgx |= fgcolor; -+ bgx |= bgcolor; -+ -+ eorx = fgx ^ bgx; -+ k = image->width / 2; -+ -+ for (i = image->height; i--;) { -+ dst = (u32 __iomem *) dst1; -+ src = s; -+ -+ j = k; -+ while (j >= 4) { -+ u8 bits = *src; -+ end_mask = tab[(bits >> 6) & 3]; -+ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); -+ end_mask = tab[(bits >> 4) & 3]; -+ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); -+ end_mask = tab[(bits >> 2) & 3]; -+ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); -+ end_mask = tab[bits & 3]; -+ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); -+ src++; -+ j -= 4; -+ } -+ if (j != 0) { -+ u8 bits = *src; -+ end_mask = tab[(bits >> 6) & 3]; -+ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); -+ if (j >= 2) { -+ end_mask = tab[(bits >> 4) & 3]; -+ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); -+ if (j == 3) { -+ end_mask = tab[(bits >> 2) & 3]; -+ FB_WRITEL((end_mask & eorx) ^ bgx, dst); -+ } -+ } -+ } -+ dst1 += p->fix.line_length; -+ s += spitch; -+ } -+} -+ -+/* -+ * Optimized fast_imageblit for bpp == 32. ppw = 1, bit_mask = 1 folded -+ * into the code, main loop unrolled. -+ */ -+ -+static inline void fast_imageblit32(const struct fb_image *image, -+ struct fb_info *p, u8 __iomem * dst1, -+ u32 fgcolor, u32 bgcolor) -+{ -+ u32 fgx = fgcolor, bgx = bgcolor; -+ u32 spitch = (image->width + 7) / 8; -+ u32 end_mask, eorx; -+ const char *s = image->data, *src; -+ u32 __iomem *dst; -+ const u32 *tab = NULL; -+ int i, j, k; -+ -+ tab = cfb_tab32; -+ -+ eorx = fgx ^ bgx; -+ k = image->width; -+ -+ for (i = image->height; i--;) { -+ dst = (u32 __iomem *) dst1; -+ src = s; -+ -+ j = k; -+ while (j >= 8) { -+ u8 bits = *src; -+ end_mask = tab[(bits >> 7) & 1]; -+ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); -+ end_mask = tab[(bits >> 6) & 1]; -+ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); -+ end_mask = tab[(bits >> 5) & 1]; -+ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); -+ end_mask = tab[(bits >> 4) & 1]; -+ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); -+ end_mask = tab[(bits >> 3) & 1]; -+ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); -+ end_mask = tab[(bits >> 2) & 1]; -+ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); -+ end_mask = tab[(bits >> 1) & 1]; -+ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); -+ end_mask = tab[bits & 1]; -+ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); -+ src++; -+ j -= 8; -+ } -+ if (j != 0) { -+ u32 bits = (u32) * src; -+ while (j > 1) { -+ end_mask = tab[(bits >> 7) & 1]; -+ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); -+ bits <<= 1; -+ j--; -+ } -+ end_mask = tab[(bits >> 7) & 1]; -+ FB_WRITEL((end_mask & eorx) ^ bgx, dst); -+ } -+ dst1 += p->fix.line_length; -+ s += spitch; -+ } -+} -+ - void cfb_imageblit(struct fb_info *p, const struct fb_image *image) - { - u32 fgcolor, bgcolor, start_index, bitstart, pitch_index = 0; -@@ -294,11 +426,21 @@ void cfb_imageblit(struct fb_info *p, co - bgcolor = image->bg_color; - } - -- if (32 % bpp == 0 && !start_index && !pitch_index && -- ((width & (32/bpp-1)) == 0) && -- bpp >= 8 && bpp <= 32) -- fast_imageblit(image, p, dst1, fgcolor, bgcolor); -- else -+ if (!start_index && !pitch_index) { -+ if (bpp == 32) -+ fast_imageblit32(image, p, dst1, fgcolor, -+ bgcolor); -+ else if (bpp == 16 && (width & 1) == 0) -+ fast_imageblit16(image, p, dst1, fgcolor, -+ bgcolor); -+ else if (bpp == 8 && (width & 3) == 0) -+ fast_imageblit(image, p, dst1, fgcolor, -+ bgcolor); -+ else -+ slow_imageblit(image, p, dst1, fgcolor, -+ bgcolor, -+ start_index, pitch_index); -+ } else - slow_imageblit(image, p, dst1, fgcolor, bgcolor, - start_index, pitch_index); - } else diff --git a/target/linux/brcm2708/patches-4.9/0058-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch b/target/linux/brcm2708/patches-4.9/0058-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch deleted file mode 100644 index 408ac045f7d9..000000000000 --- a/target/linux/brcm2708/patches-4.9/0058-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch +++ /dev/null @@ -1,242 +0,0 @@ -From 5edc95eee5ef69d7bfe03eede0e711e8f196dedc Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Wed, 8 May 2013 11:46:50 +0100 -Subject: [PATCH] enabling the realtime clock 1-wire chip DS1307 and 1-wire on - GPIO4 (as a module) - -1-wire: Add support for configuring pin for w1-gpio kernel module -See: https://github.com/raspberrypi/linux/pull/457 - -Add bitbanging pullups, use them for w1-gpio - -Allows parasite power to work, uses module option pullup=1 - -bcm2708: Ensure 1-wire pullup is disabled by default, and expose as module parameter - -Signed-off-by: Alex J Lennon - -w1-gpio: Add gpiopin module parameter and correctly free up gpio pull-up pin, if set - -Signed-off-by: Alex J Lennon - -w1-gpio: Sort out the pullup/parasitic power tangle ---- - drivers/w1/masters/w1-gpio.c | 69 ++++++++++++++++++++++++++++++++++++++++---- - drivers/w1/w1.h | 6 ++++ - drivers/w1/w1_int.c | 14 +++++++++ - drivers/w1/w1_io.c | 18 ++++++++++-- - include/linux/w1-gpio.h | 1 + - 5 files changed, 99 insertions(+), 9 deletions(-) - ---- a/drivers/w1/masters/w1-gpio.c -+++ b/drivers/w1/masters/w1-gpio.c -@@ -23,6 +23,19 @@ - #include "../w1.h" - #include "../w1_int.h" - -+static int w1_gpio_pullup = 0; -+static int w1_gpio_pullup_orig = 0; -+module_param_named(pullup, w1_gpio_pullup, int, 0); -+MODULE_PARM_DESC(pullup, "Enable parasitic power (power on data) mode"); -+static int w1_gpio_pullup_pin = -1; -+static int w1_gpio_pullup_pin_orig = -1; -+module_param_named(extpullup, w1_gpio_pullup_pin, int, 0); -+MODULE_PARM_DESC(extpullup, "GPIO external pullup pin number"); -+static int w1_gpio_pin = -1; -+static int w1_gpio_pin_orig = -1; -+module_param_named(gpiopin, w1_gpio_pin, int, 0); -+MODULE_PARM_DESC(gpiopin, "GPIO pin number"); -+ - static u8 w1_gpio_set_pullup(void *data, int delay) - { - struct w1_gpio_platform_data *pdata = data; -@@ -67,6 +80,16 @@ static u8 w1_gpio_read_bit(void *data) - return gpio_get_value(pdata->pin) ? 1 : 0; - } - -+static void w1_gpio_bitbang_pullup(void *data, u8 on) -+{ -+ struct w1_gpio_platform_data *pdata = data; -+ -+ if (on) -+ gpio_direction_output(pdata->pin, 1); -+ else -+ gpio_direction_input(pdata->pin); -+} -+ - #if defined(CONFIG_OF) - static const struct of_device_id w1_gpio_dt_ids[] = { - { .compatible = "w1-gpio" }, -@@ -80,6 +103,7 @@ static int w1_gpio_probe_dt(struct platf - struct w1_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev); - struct device_node *np = pdev->dev.of_node; - int gpio; -+ u32 value; - - pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) -@@ -88,6 +112,9 @@ static int w1_gpio_probe_dt(struct platf - if (of_get_property(np, "linux,open-drain", NULL)) - pdata->is_open_drain = 1; - -+ if (of_property_read_u32(np, "rpi,parasitic-power", &value) == 0) -+ pdata->parasitic_power = (value != 0); -+ - gpio = of_get_gpio(np, 0); - if (gpio < 0) { - if (gpio != -EPROBE_DEFER) -@@ -103,7 +130,7 @@ static int w1_gpio_probe_dt(struct platf - if (gpio == -EPROBE_DEFER) - return gpio; - /* ignore other errors as the pullup gpio is optional */ -- pdata->ext_pullup_enable_pin = gpio; -+ pdata->ext_pullup_enable_pin = (gpio >= 0) ? gpio : -1; - - pdev->dev.platform_data = pdata; - -@@ -113,13 +140,15 @@ static int w1_gpio_probe_dt(struct platf - static int w1_gpio_probe(struct platform_device *pdev) - { - struct w1_bus_master *master; -- struct w1_gpio_platform_data *pdata; -+ struct w1_gpio_platform_data *pdata = pdev->dev.platform_data; - int err; - -- if (of_have_populated_dt()) { -- err = w1_gpio_probe_dt(pdev); -- if (err < 0) -- return err; -+ if(pdata == NULL) { -+ if (of_have_populated_dt()) { -+ err = w1_gpio_probe_dt(pdev); -+ if (err < 0) -+ return err; -+ } - } - - pdata = dev_get_platdata(&pdev->dev); -@@ -136,6 +165,22 @@ static int w1_gpio_probe(struct platform - return -ENOMEM; - } - -+ w1_gpio_pin_orig = pdata->pin; -+ w1_gpio_pullup_pin_orig = pdata->ext_pullup_enable_pin; -+ w1_gpio_pullup_orig = pdata->parasitic_power; -+ -+ if(gpio_is_valid(w1_gpio_pin)) { -+ pdata->pin = w1_gpio_pin; -+ pdata->ext_pullup_enable_pin = -1; -+ pdata->parasitic_power = -1; -+ } -+ pdata->parasitic_power |= w1_gpio_pullup; -+ if(gpio_is_valid(w1_gpio_pullup_pin)) { -+ pdata->ext_pullup_enable_pin = w1_gpio_pullup_pin; -+ } -+ -+ dev_info(&pdev->dev, "gpio pin %d, external pullup pin %d, parasitic power %d\n", pdata->pin, pdata->ext_pullup_enable_pin, pdata->parasitic_power); -+ - err = devm_gpio_request(&pdev->dev, pdata->pin, "w1"); - if (err) { - dev_err(&pdev->dev, "gpio_request (pin) failed\n"); -@@ -165,6 +210,14 @@ static int w1_gpio_probe(struct platform - master->set_pullup = w1_gpio_set_pullup; - } - -+ if (pdata->parasitic_power) { -+ if (pdata->is_open_drain) -+ printk(KERN_ERR "w1-gpio 'pullup'(parasitic power) " -+ "option doesn't work with open drain GPIO\n"); -+ else -+ master->bitbang_pullup = w1_gpio_bitbang_pullup; -+ } -+ - err = w1_add_master_device(master); - if (err) { - dev_err(&pdev->dev, "w1_add_master device failed\n"); -@@ -195,6 +248,10 @@ static int w1_gpio_remove(struct platfor - - w1_remove_master_device(master); - -+ pdata->pin = w1_gpio_pin_orig; -+ pdata->ext_pullup_enable_pin = w1_gpio_pullup_pin_orig; -+ pdata->parasitic_power = w1_gpio_pullup_orig; -+ - return 0; - } - ---- a/drivers/w1/w1.h -+++ b/drivers/w1/w1.h -@@ -173,6 +173,12 @@ struct w1_bus_master - - u8 (*set_pullup)(void *, int); - -+ /** -+ * Turns the pullup on/off in bitbanging mode, takes an on/off argument. -+ * @return -1=Error, 0=completed -+ */ -+ void (*bitbang_pullup) (void *, u8); -+ - void (*search)(void *, struct w1_master *, - u8, w1_slave_found_callback); - }; ---- a/drivers/w1/w1_int.c -+++ b/drivers/w1/w1_int.c -@@ -122,6 +122,20 @@ int w1_add_master_device(struct w1_bus_m - return(-EINVAL); - } - -+ /* bitbanging hardware uses bitbang_pullup, other hardware uses set_pullup -+ * and takes care of timing itself */ -+ if (!master->write_byte && !master->touch_bit && master->set_pullup) { -+ printk(KERN_ERR "w1_add_master_device: set_pullup requires " -+ "write_byte or touch_bit, disabling\n"); -+ master->set_pullup = NULL; -+ } -+ -+ if (master->set_pullup && master->bitbang_pullup) { -+ printk(KERN_ERR "w1_add_master_device: set_pullup should not " -+ "be set when bitbang_pullup is used, disabling\n"); -+ master->set_pullup = NULL; -+ } -+ - /* Lock until the device is added (or not) to w1_masters. */ - mutex_lock(&w1_mlock); - /* Search for the first available id (starting at 1). */ ---- a/drivers/w1/w1_io.c -+++ b/drivers/w1/w1_io.c -@@ -134,10 +134,22 @@ static void w1_pre_write(struct w1_maste - static void w1_post_write(struct w1_master *dev) - { - if (dev->pullup_duration) { -- if (dev->enable_pullup && dev->bus_master->set_pullup) -- dev->bus_master->set_pullup(dev->bus_master->data, 0); -- else -+ if (dev->enable_pullup) { -+ if (dev->bus_master->set_pullup) { -+ dev->bus_master->set_pullup(dev-> -+ bus_master->data, -+ 0); -+ } else if (dev->bus_master->bitbang_pullup) { -+ dev->bus_master-> -+ bitbang_pullup(dev->bus_master->data, 1); - msleep(dev->pullup_duration); -+ dev->bus_master-> -+ bitbang_pullup(dev->bus_master->data, 0); -+ } -+ } else { -+ msleep(dev->pullup_duration); -+ } -+ - dev->pullup_duration = 0; - } - } ---- a/include/linux/w1-gpio.h -+++ b/include/linux/w1-gpio.h -@@ -18,6 +18,7 @@ - struct w1_gpio_platform_data { - unsigned int pin; - unsigned int is_open_drain:1; -+ unsigned int parasitic_power:1; - void (*enable_external_pullup)(int enable); - unsigned int ext_pullup_enable_pin; - unsigned int pullup_duration; diff --git a/target/linux/brcm2708/patches-4.9/0059-Added-Device-IDs-for-August-DVB-T-205.patch b/target/linux/brcm2708/patches-4.9/0059-Added-Device-IDs-for-August-DVB-T-205.patch deleted file mode 100644 index a9906f3e3cea..000000000000 --- a/target/linux/brcm2708/patches-4.9/0059-Added-Device-IDs-for-August-DVB-T-205.patch +++ /dev/null @@ -1,22 +0,0 @@ -From 0d3a6a7484390def36773cb4fee0e16d6b8c45d1 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Wed, 3 Jul 2013 00:54:08 +0100 -Subject: [PATCH] Added Device IDs for August DVB-T 205 - ---- - drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c -+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c -@@ -1916,6 +1916,10 @@ static const struct usb_device_id rtl28x - &rtl28xxu_props, "Compro VideoMate U650F", NULL) }, - { DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd394, - &rtl28xxu_props, "MaxMedia HU394-T", NULL) }, -+ { DVB_USB_DEVICE(USB_VID_GTEK, 0xb803 /*USB_PID_AUGUST_DVBT205*/, -+ &rtl28xxu_props, "August DVB-T 205", NULL) }, -+ { DVB_USB_DEVICE(USB_VID_GTEK, 0xa803 /*USB_PID_AUGUST_DVBT205*/, -+ &rtl28xxu_props, "August DVB-T 205", NULL) }, - { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a03, - &rtl28xxu_props, "Leadtek WinFast DTV Dongle mini", NULL) }, - { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_CPYTO_REDI_PC50A, diff --git a/target/linux/brcm2708/patches-4.9/0060-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch b/target/linux/brcm2708/patches-4.9/0060-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch deleted file mode 100644 index 73c9edeea4e6..000000000000 --- a/target/linux/brcm2708/patches-4.9/0060-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch +++ /dev/null @@ -1,50 +0,0 @@ -From c50fe09c78e9b87137e0188139c774bd4f12dcb2 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Wed, 18 Dec 2013 22:16:19 +0000 -Subject: [PATCH] config: Enable CONFIG_MEMCG, but leave it disabled (due to - memory cost). Enable with cgroup_enable=memory. - ---- - kernel/cgroup.c | 24 +++++++++++++++++++++++- - 1 file changed, 23 insertions(+), 1 deletion(-) - ---- a/kernel/cgroup.c -+++ b/kernel/cgroup.c -@@ -5626,7 +5626,7 @@ int __init cgroup_init_early(void) - return 0; - } - --static u16 cgroup_disable_mask __initdata; -+static u16 cgroup_disable_mask __initdata = 1<<0; - - /** - * cgroup_init - cgroup initialization -@@ -6163,6 +6163,28 @@ static int __init cgroup_no_v1(char *str - } - __setup("cgroup_no_v1=", cgroup_no_v1); - -+static int __init cgroup_enable(char *str) -+{ -+ struct cgroup_subsys *ss; -+ char *token; -+ int i; -+ -+ while ((token = strsep(&str, ",")) != NULL) { -+ if (!*token) -+ continue; -+ -+ for_each_subsys(ss, i) { -+ if (strcmp(token, ss->name) && -+ strcmp(token, ss->legacy_name)) -+ continue; -+ -+ cgroup_disable_mask &= ~(1 << i); -+ } -+ } -+ return 1; -+} -+__setup("cgroup_enable=", cgroup_enable); -+ - /** - * css_tryget_online_from_dir - get corresponding css from a cgroup dentry - * @dentry: directory dentry of interest diff --git a/target/linux/brcm2708/patches-4.9/0061-hid-Reduce-default-mouse-polling-interval-to-60Hz.patch b/target/linux/brcm2708/patches-4.9/0061-hid-Reduce-default-mouse-polling-interval-to-60Hz.patch deleted file mode 100644 index 444c64e471e9..000000000000 --- a/target/linux/brcm2708/patches-4.9/0061-hid-Reduce-default-mouse-polling-interval-to-60Hz.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 56f13ae9d518c5aec8736ccc639f2f5e2c3784ad Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Mon, 14 Jul 2014 22:02:09 +0100 -Subject: [PATCH] hid: Reduce default mouse polling interval to 60Hz - -Reduces overhead when using X ---- - drivers/hid/usbhid/hid-core.c | 10 +++++++--- - 1 file changed, 7 insertions(+), 3 deletions(-) - ---- a/drivers/hid/usbhid/hid-core.c -+++ b/drivers/hid/usbhid/hid-core.c -@@ -49,7 +49,7 @@ - * Module parameters. - */ - --static unsigned int hid_mousepoll_interval; -+static unsigned int hid_mousepoll_interval = ~0; - module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644); - MODULE_PARM_DESC(mousepoll, "Polling interval of mice"); - -@@ -1083,8 +1083,12 @@ static int usbhid_start(struct hid_devic - } - - /* Change the polling interval of mice. */ -- if (hid->collection->usage == HID_GD_MOUSE && hid_mousepoll_interval > 0) -- interval = hid_mousepoll_interval; -+ if (hid->collection->usage == HID_GD_MOUSE) { -+ if (hid_mousepoll_interval == ~0 && interval < 16) -+ interval = 16; -+ else if (hid_mousepoll_interval != ~0 && hid_mousepoll_interval != 0) -+ interval = hid_mousepoll_interval; -+ } - - ret = -ENOMEM; - if (usb_endpoint_dir_in(endpoint)) { diff --git a/target/linux/brcm2708/patches-4.9/0062-rpi-ft5406-Add-touchscreen-driver-for-pi-LCD-display.patch b/target/linux/brcm2708/patches-4.9/0062-rpi-ft5406-Add-touchscreen-driver-for-pi-LCD-display.patch deleted file mode 100644 index 43ed3faa9c3a..000000000000 --- a/target/linux/brcm2708/patches-4.9/0062-rpi-ft5406-Add-touchscreen-driver-for-pi-LCD-display.patch +++ /dev/null @@ -1,351 +0,0 @@ -From 18c740925ca44b8a2f55ac201acf935f9fa97515 Mon Sep 17 00:00:00 2001 -From: Gordon Hollingworth -Date: Tue, 12 May 2015 14:47:56 +0100 -Subject: [PATCH] rpi-ft5406: Add touchscreen driver for pi LCD display - -Fix driver detection failure Check that the buffer response is non-zero meaning the touchscreen was detected - -rpi-ft5406: Use firmware API - -RPI-FT5406: Enable aarch64 support through explicit iomem interface - -Signed-off-by: Gerhard de Clercq ---- - drivers/input/touchscreen/Kconfig | 7 + - drivers/input/touchscreen/Makefile | 1 + - drivers/input/touchscreen/rpi-ft5406.c | 292 +++++++++++++++++++++++++++++ - include/soc/bcm2835/raspberrypi-firmware.h | 1 + - 4 files changed, 301 insertions(+) - create mode 100644 drivers/input/touchscreen/rpi-ft5406.c - ---- a/drivers/input/touchscreen/Kconfig -+++ b/drivers/input/touchscreen/Kconfig -@@ -638,6 +638,13 @@ config TOUCHSCREEN_EDT_FT5X06 - To compile this driver as a module, choose M here: the - module will be called edt-ft5x06. - -+config TOUCHSCREEN_RPI_FT5406 -+ tristate "Raspberry Pi FT5406 driver" -+ depends on RASPBERRYPI_FIRMWARE -+ help -+ Say Y here to enable the Raspberry Pi memory based FT5406 device -+ -+ - config TOUCHSCREEN_MIGOR - tristate "Renesas MIGO-R touchscreen" - depends on (SH_MIGOR || COMPILE_TEST) && I2C ---- a/drivers/input/touchscreen/Makefile -+++ b/drivers/input/touchscreen/Makefile -@@ -29,6 +29,7 @@ obj-$(CONFIG_TOUCHSCREEN_DA9034) += da90 - obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o - obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o - obj-$(CONFIG_TOUCHSCREEN_EDT_FT5X06) += edt-ft5x06.o -+obj-$(CONFIG_TOUCHSCREEN_RPI_FT5406) += rpi-ft5406.o - obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o - obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o - obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o ---- /dev/null -+++ b/drivers/input/touchscreen/rpi-ft5406.c -@@ -0,0 +1,292 @@ -+/* -+ * Driver for memory based ft5406 touchscreen -+ * -+ * Copyright (C) 2015 Raspberry Pi -+ * -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define MAXIMUM_SUPPORTED_POINTS 10 -+struct ft5406_regs { -+ uint8_t device_mode; -+ uint8_t gesture_id; -+ uint8_t num_points; -+ struct ft5406_touch { -+ uint8_t xh; -+ uint8_t xl; -+ uint8_t yh; -+ uint8_t yl; -+ uint8_t res1; -+ uint8_t res2; -+ } point[MAXIMUM_SUPPORTED_POINTS]; -+}; -+ -+#define SCREEN_WIDTH 800 -+#define SCREEN_HEIGHT 480 -+ -+struct ft5406 { -+ struct platform_device * pdev; -+ struct input_dev * input_dev; -+ void __iomem * ts_base; -+ dma_addr_t bus_addr; -+ struct task_struct * thread; -+}; -+ -+/* Thread to poll for touchscreen events -+ * -+ * This thread polls the memory based register copy of the ft5406 registers -+ * using the number of points register to know whether the copy has been -+ * updated (we write 99 to the memory copy, the GPU will write between -+ * 0 - 10 points) -+ */ -+static int ft5406_thread(void *arg) -+{ -+ struct ft5406 *ts = (struct ft5406 *) arg; -+ struct ft5406_regs regs; -+ int known_ids = 0; -+ -+ while(!kthread_should_stop()) -+ { -+ // 60fps polling -+ msleep_interruptible(17); -+ memcpy_fromio(®s, ts->ts_base, sizeof(struct ft5406_regs)); -+ iowrite8(99, ts->ts_base + offsetof(struct ft5406_regs, num_points)); -+ // Do not output if theres no new information (num_points is 99) -+ // or we have no touch points and don't need to release any -+ if(!(regs.num_points == 99 || (regs.num_points == 0 && known_ids == 0))) -+ { -+ int i; -+ int modified_ids = 0, released_ids; -+ for(i = 0; i < regs.num_points; i++) -+ { -+ int x = (((int) regs.point[i].xh & 0xf) << 8) + regs.point[i].xl; -+ int y = (((int) regs.point[i].yh & 0xf) << 8) + regs.point[i].yl; -+ int touchid = (regs.point[i].yh >> 4) & 0xf; -+ -+ modified_ids |= 1 << touchid; -+ -+ if(!((1 << touchid) & known_ids)) -+ dev_dbg(&ts->pdev->dev, "x = %d, y = %d, touchid = %d\n", x, y, touchid); -+ -+ input_mt_slot(ts->input_dev, touchid); -+ input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, 1); -+ -+ input_report_abs(ts->input_dev, ABS_MT_POSITION_X, x); -+ input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, y); -+ -+ } -+ -+ released_ids = known_ids & ~modified_ids; -+ for(i = 0; released_ids && i < MAXIMUM_SUPPORTED_POINTS; i++) -+ { -+ if(released_ids & (1<pdev->dev, "Released %d, known = %x modified = %x\n", i, known_ids, modified_ids); -+ input_mt_slot(ts->input_dev, i); -+ input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, 0); -+ modified_ids &= ~(1 << i); -+ } -+ } -+ known_ids = modified_ids; -+ -+ input_mt_report_pointer_emulation(ts->input_dev, true); -+ input_sync(ts->input_dev); -+ } -+ -+ } -+ -+ return 0; -+} -+ -+static int ft5406_probe(struct platform_device *pdev) -+{ -+ int err = 0; -+ struct device *dev = &pdev->dev; -+ struct device_node *np = dev->of_node; -+ struct ft5406 * ts; -+ struct device_node *fw_node; -+ struct rpi_firmware *fw; -+ u32 touchbuf; -+ -+ dev_info(dev, "Probing device\n"); -+ -+ fw_node = of_parse_phandle(np, "firmware", 0); -+ if (!fw_node) { -+ dev_err(dev, "Missing firmware node\n"); -+ return -ENOENT; -+ } -+ -+ fw = rpi_firmware_get(fw_node); -+ if (!fw) -+ return -EPROBE_DEFER; -+ -+ ts = devm_kzalloc(dev, sizeof(struct ft5406), GFP_KERNEL); -+ if (!ts) { -+ dev_err(dev, "Failed to allocate memory\n"); -+ return -ENOMEM; -+ } -+ -+ ts->input_dev = input_allocate_device(); -+ if (!ts->input_dev) { -+ dev_err(dev, "Failed to allocate input device\n"); -+ return -ENOMEM; -+ } -+ -+ ts->ts_base = dma_zalloc_coherent(dev, PAGE_SIZE, &ts->bus_addr, GFP_KERNEL); -+ if (!ts->ts_base) { -+ pr_err("[%s]: failed to dma_alloc_coherent(%ld)\n", -+ __func__, PAGE_SIZE); -+ err = -ENOMEM; -+ goto out; -+ } -+ -+ touchbuf = (u32)ts->bus_addr; -+ err = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF, -+ &touchbuf, sizeof(touchbuf)); -+ -+ if (err || touchbuf != 0) { -+ dev_warn(dev, "Failed to set touchbuf, trying to get err:%x\n", err); -+ dma_free_coherent(dev, PAGE_SIZE, ts->ts_base, ts->bus_addr); -+ ts->ts_base = 0; -+ ts->bus_addr = 0; -+ } -+ -+ if (!ts->ts_base) { -+ dev_warn(dev, "set failed, trying get (err:%d touchbuf:%x virt:%p bus:%x)\n", err, touchbuf, ts->ts_base, ts->bus_addr); -+ -+ err = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF, -+ &touchbuf, sizeof(touchbuf)); -+ if (err) { -+ dev_err(dev, "Failed to get touch buffer\n"); -+ goto out; -+ } -+ -+ if (!touchbuf) { -+ dev_err(dev, "Touchscreen not detected\n"); -+ err = -ENODEV; -+ goto out; -+ } -+ -+ dev_dbg(dev, "Got TS buffer 0x%x\n", touchbuf); -+ -+ // mmap the physical memory -+ touchbuf &= ~0xc0000000; -+ ts->ts_base = ioremap(touchbuf, sizeof(struct ft5406_regs)); -+ if (ts->ts_base == NULL) -+ { -+ dev_err(dev, "Failed to map physical address\n"); -+ err = -ENOMEM; -+ goto out; -+ } -+ } -+ platform_set_drvdata(pdev, ts); -+ ts->pdev = pdev; -+ -+ ts->input_dev->name = "FT5406 memory based driver"; -+ -+ __set_bit(EV_KEY, ts->input_dev->evbit); -+ __set_bit(EV_SYN, ts->input_dev->evbit); -+ __set_bit(EV_ABS, ts->input_dev->evbit); -+ -+ input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, 0, -+ SCREEN_WIDTH, 0, 0); -+ input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, 0, -+ SCREEN_HEIGHT, 0, 0); -+ -+ input_mt_init_slots(ts->input_dev, MAXIMUM_SUPPORTED_POINTS, INPUT_MT_DIRECT); -+ -+ input_set_drvdata(ts->input_dev, ts); -+ -+ err = input_register_device(ts->input_dev); -+ if (err) { -+ dev_err(dev, "could not register input device, %d\n", -+ err); -+ goto out; -+ } -+ -+ // create thread to poll the touch events -+ ts->thread = kthread_run(ft5406_thread, ts, "ft5406"); -+ if(ts->thread == NULL) -+ { -+ dev_err(dev, "Failed to create kernel thread"); -+ err = -ENOMEM; -+ goto out; -+ } -+ -+ return 0; -+ -+out: -+ if (ts->bus_addr) { -+ dma_free_coherent(dev, PAGE_SIZE, ts->ts_base, ts->bus_addr); -+ ts->bus_addr = 0; -+ ts->ts_base = NULL; -+ } else if (ts->ts_base) { -+ iounmap(ts->ts_base); -+ ts->ts_base = NULL; -+ } -+ if (ts->input_dev) { -+ input_unregister_device(ts->input_dev); -+ ts->input_dev = NULL; -+ } -+ return err; -+} -+ -+static int ft5406_remove(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct ft5406 *ts = (struct ft5406 *) platform_get_drvdata(pdev); -+ -+ dev_info(dev, "Removing rpi-ft5406\n"); -+ -+ kthread_stop(ts->thread); -+ -+ if (ts->bus_addr) -+ dma_free_coherent(dev, PAGE_SIZE, ts->ts_base, ts->bus_addr); -+ else if (ts->ts_base) -+ iounmap(ts->ts_base); -+ if (ts->input_dev) -+ input_unregister_device(ts->input_dev); -+ -+ return 0; -+} -+ -+static const struct of_device_id ft5406_match[] = { -+ { .compatible = "rpi,rpi-ft5406", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, ft5406_match); -+ -+static struct platform_driver ft5406_driver = { -+ .driver = { -+ .name = "rpi-ft5406", -+ .owner = THIS_MODULE, -+ .of_match_table = ft5406_match, -+ }, -+ .probe = ft5406_probe, -+ .remove = ft5406_remove, -+}; -+ -+module_platform_driver(ft5406_driver); -+ -+MODULE_AUTHOR("Gordon Hollingworth"); -+MODULE_DESCRIPTION("Touchscreen driver for memory based FT5406"); -+MODULE_LICENSE("GPL"); ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -115,6 +115,7 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, - RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, - RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, -+ RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f, - RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e, - RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f, - diff --git a/target/linux/brcm2708/patches-4.9/0063-Improve-__copy_to_user-and-__copy_from_user-performa.patch b/target/linux/brcm2708/patches-4.9/0063-Improve-__copy_to_user-and-__copy_from_user-performa.patch deleted file mode 100644 index a7ce64ba3811..000000000000 --- a/target/linux/brcm2708/patches-4.9/0063-Improve-__copy_to_user-and-__copy_from_user-performa.patch +++ /dev/null @@ -1,1543 +0,0 @@ -From ebd731dd71ec9728a5a87ec1cd695be15828c32c Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Mon, 28 Nov 2016 16:50:04 +0000 -Subject: [PATCH] Improve __copy_to_user and __copy_from_user performance - -Provide a __copy_from_user that uses memcpy. On BCM2708, use -optimised memcpy/memmove/memcmp/memset implementations. - -arch/arm: Add mmiocpy/set aliases for memcpy/set - -See: https://github.com/raspberrypi/linux/issues/1082 - -copy_from_user: CPU_SW_DOMAIN_PAN compatibility - -The downstream copy_from_user acceleration must also play nice with -CONFIG_CPU_SW_DOMAIN_PAN. - -See: https://github.com/raspberrypi/linux/issues/1381 - -Signed-off-by: Phil Elwell ---- - arch/arm/include/asm/string.h | 5 + - arch/arm/include/asm/uaccess.h | 3 + - arch/arm/lib/Makefile | 15 +- - arch/arm/lib/arm-mem.h | 159 ++++++++++++ - arch/arm/lib/copy_from_user.S | 4 +- - arch/arm/lib/exports_rpi.c | 37 +++ - arch/arm/lib/memcmp_rpi.S | 285 +++++++++++++++++++++ - arch/arm/lib/memcpy_rpi.S | 61 +++++ - arch/arm/lib/memcpymove.h | 506 +++++++++++++++++++++++++++++++++++++ - arch/arm/lib/memmove_rpi.S | 61 +++++ - arch/arm/lib/memset_rpi.S | 123 +++++++++ - arch/arm/lib/uaccess_with_memcpy.c | 120 ++++++++- - arch/arm/mach-bcm/Kconfig | 7 + - 13 files changed, 1380 insertions(+), 6 deletions(-) - create mode 100644 arch/arm/lib/arm-mem.h - create mode 100644 arch/arm/lib/exports_rpi.c - create mode 100644 arch/arm/lib/memcmp_rpi.S - create mode 100644 arch/arm/lib/memcpy_rpi.S - create mode 100644 arch/arm/lib/memcpymove.h - create mode 100644 arch/arm/lib/memmove_rpi.S - create mode 100644 arch/arm/lib/memset_rpi.S - ---- a/arch/arm/include/asm/string.h -+++ b/arch/arm/include/asm/string.h -@@ -24,6 +24,11 @@ extern void * memchr(const void *, int, - #define __HAVE_ARCH_MEMSET - extern void * memset(void *, int, __kernel_size_t); - -+#ifdef CONFIG_BCM2835_FAST_MEMCPY -+#define __HAVE_ARCH_MEMCMP -+extern int memcmp(const void *, const void *, size_t); -+#endif -+ - extern void __memzero(void *ptr, __kernel_size_t n); - - #define memset(p,v,n) \ ---- a/arch/arm/include/asm/uaccess.h -+++ b/arch/arm/include/asm/uaccess.h -@@ -477,6 +477,9 @@ do { \ - extern unsigned long __must_check - arm_copy_from_user(void *to, const void __user *from, unsigned long n); - -+extern unsigned long __must_check -+__copy_from_user_std(void *to, const void __user *from, unsigned long n); -+ - static inline unsigned long __must_check - __copy_from_user(void *to, const void __user *from, unsigned long n) - { ---- a/arch/arm/lib/Makefile -+++ b/arch/arm/lib/Makefile -@@ -6,9 +6,8 @@ - - lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ - csumpartialcopy.o csumpartialcopyuser.o clearbit.o \ -- delay.o delay-loop.o findbit.o memchr.o memcpy.o \ -- memmove.o memset.o memzero.o setbit.o \ -- strchr.o strrchr.o \ -+ delay.o delay-loop.o findbit.o memchr.o memzero.o \ -+ setbit.o strchr.o strrchr.o \ - testchangebit.o testclearbit.o testsetbit.o \ - ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ - ucmpdi2.o lib1funcs.o div64.o \ -@@ -18,6 +17,16 @@ lib-y := backtrace.o changebit.o csumip - mmu-y := clear_user.o copy_page.o getuser.o putuser.o \ - copy_from_user.o copy_to_user.o - -+# Choose optimised implementations for Raspberry Pi -+ifeq ($(CONFIG_BCM2835_FAST_MEMCPY),y) -+ CFLAGS_uaccess_with_memcpy.o += -DCOPY_FROM_USER_THRESHOLD=1600 -+ CFLAGS_uaccess_with_memcpy.o += -DCOPY_TO_USER_THRESHOLD=672 -+ obj-$(CONFIG_MODULES) += exports_rpi.o -+ lib-y += memcpy_rpi.o memmove_rpi.o memset_rpi.o memcmp_rpi.o -+else -+ lib-y += memcpy.o memmove.o memset.o -+endif -+ - # using lib_ here won't override already available weak symbols - obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o - ---- /dev/null -+++ b/arch/arm/lib/arm-mem.h -@@ -0,0 +1,159 @@ -+/* -+Copyright (c) 2013, Raspberry Pi Foundation -+Copyright (c) 2013, RISC OS Open Ltd -+All rights reserved. -+ -+Redistribution and use in source and binary forms, with or without -+modification, are permitted provided that the following conditions are met: -+ * Redistributions of source code must retain the above copyright -+ notice, this list of conditions and the following disclaimer. -+ * Redistributions in binary form must reproduce the above copyright -+ notice, this list of conditions and the following disclaimer in the -+ documentation and/or other materials provided with the distribution. -+ * Neither the name of the copyright holder nor the -+ names of its contributors may be used to endorse or promote products -+ derived from this software without specific prior written permission. -+ -+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY -+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+*/ -+ -+.macro myfunc fname -+ .func fname -+ .global fname -+fname: -+.endm -+ -+.macro preload_leading_step1 backwards, ptr, base -+/* If the destination is already 16-byte aligned, then we need to preload -+ * between 0 and prefetch_distance (inclusive) cache lines ahead so there -+ * are no gaps when the inner loop starts. -+ */ -+ .if backwards -+ sub ptr, base, #1 -+ bic ptr, ptr, #31 -+ .else -+ bic ptr, base, #31 -+ .endif -+ .set OFFSET, 0 -+ .rept prefetch_distance+1 -+ pld [ptr, #OFFSET] -+ .if backwards -+ .set OFFSET, OFFSET-32 -+ .else -+ .set OFFSET, OFFSET+32 -+ .endif -+ .endr -+.endm -+ -+.macro preload_leading_step2 backwards, ptr, base, leading_bytes, tmp -+/* However, if the destination is not 16-byte aligned, we may need to -+ * preload one more cache line than that. The question we need to ask is: -+ * are the leading bytes more than the amount by which the source -+ * pointer will be rounded down for preloading, and if so, by how many -+ * cache lines? -+ */ -+ .if backwards -+/* Here we compare against how many bytes we are into the -+ * cache line, counting down from the highest such address. -+ * Effectively, we want to calculate -+ * leading_bytes = dst&15 -+ * cacheline_offset = 31-((src-leading_bytes-1)&31) -+ * extra_needed = leading_bytes - cacheline_offset -+ * and test if extra_needed is <= 0, or rearranging: -+ * leading_bytes + (src-leading_bytes-1)&31 <= 31 -+ */ -+ mov tmp, base, lsl #32-5 -+ sbc tmp, tmp, leading_bytes, lsl #32-5 -+ adds tmp, tmp, leading_bytes, lsl #32-5 -+ bcc 61f -+ pld [ptr, #-32*(prefetch_distance+1)] -+ .else -+/* Effectively, we want to calculate -+ * leading_bytes = (-dst)&15 -+ * cacheline_offset = (src+leading_bytes)&31 -+ * extra_needed = leading_bytes - cacheline_offset -+ * and test if extra_needed is <= 0. -+ */ -+ mov tmp, base, lsl #32-5 -+ add tmp, tmp, leading_bytes, lsl #32-5 -+ rsbs tmp, tmp, leading_bytes, lsl #32-5 -+ bls 61f -+ pld [ptr, #32*(prefetch_distance+1)] -+ .endif -+61: -+.endm -+ -+.macro preload_trailing backwards, base, remain, tmp -+ /* We need either 0, 1 or 2 extra preloads */ -+ .if backwards -+ rsb tmp, base, #0 -+ mov tmp, tmp, lsl #32-5 -+ .else -+ mov tmp, base, lsl #32-5 -+ .endif -+ adds tmp, tmp, remain, lsl #32-5 -+ adceqs tmp, tmp, #0 -+ /* The instruction above has two effects: ensures Z is only -+ * set if C was clear (so Z indicates that both shifted quantities -+ * were 0), and clears C if Z was set (so C indicates that the sum -+ * of the shifted quantities was greater and not equal to 32) */ -+ beq 82f -+ .if backwards -+ sub tmp, base, #1 -+ bic tmp, tmp, #31 -+ .else -+ bic tmp, base, #31 -+ .endif -+ bcc 81f -+ .if backwards -+ pld [tmp, #-32*(prefetch_distance+1)] -+81: -+ pld [tmp, #-32*prefetch_distance] -+ .else -+ pld [tmp, #32*(prefetch_distance+2)] -+81: -+ pld [tmp, #32*(prefetch_distance+1)] -+ .endif -+82: -+.endm -+ -+.macro preload_all backwards, narrow_case, shift, base, remain, tmp0, tmp1 -+ .if backwards -+ sub tmp0, base, #1 -+ bic tmp0, tmp0, #31 -+ pld [tmp0] -+ sub tmp1, base, remain, lsl #shift -+ .else -+ bic tmp0, base, #31 -+ pld [tmp0] -+ add tmp1, base, remain, lsl #shift -+ sub tmp1, tmp1, #1 -+ .endif -+ bic tmp1, tmp1, #31 -+ cmp tmp1, tmp0 -+ beq 92f -+ .if narrow_case -+ /* In this case, all the data fits in either 1 or 2 cache lines */ -+ pld [tmp1] -+ .else -+91: -+ .if backwards -+ sub tmp0, tmp0, #32 -+ .else -+ add tmp0, tmp0, #32 -+ .endif -+ cmp tmp0, tmp1 -+ pld [tmp0] -+ bne 91b -+ .endif -+92: -+.endm ---- a/arch/arm/lib/copy_from_user.S -+++ b/arch/arm/lib/copy_from_user.S -@@ -89,11 +89,13 @@ - - .text - --ENTRY(arm_copy_from_user) -+ENTRY(__copy_from_user_std) -+WEAK(arm_copy_from_user) - - #include "copy_template.S" - - ENDPROC(arm_copy_from_user) -+ENDPROC(__copy_from_user_std) - - .pushsection .fixup,"ax" - .align 0 ---- /dev/null -+++ b/arch/arm/lib/exports_rpi.c -@@ -0,0 +1,37 @@ -+/** -+ * Copyright (c) 2014, Raspberry Pi (Trading) Ltd. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions, and the following disclaimer, -+ * without modification. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The names of the above-listed copyright holders may not be used -+ * to endorse or promote products derived from this software without -+ * specific prior written permission. -+ * -+ * ALTERNATIVELY, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") version 2, as published by the Free -+ * Software Foundation. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS -+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, -+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+#include -+#include -+ -+EXPORT_SYMBOL(memcmp); ---- /dev/null -+++ b/arch/arm/lib/memcmp_rpi.S -@@ -0,0 +1,285 @@ -+/* -+Copyright (c) 2013, Raspberry Pi Foundation -+Copyright (c) 2013, RISC OS Open Ltd -+All rights reserved. -+ -+Redistribution and use in source and binary forms, with or without -+modification, are permitted provided that the following conditions are met: -+ * Redistributions of source code must retain the above copyright -+ notice, this list of conditions and the following disclaimer. -+ * Redistributions in binary form must reproduce the above copyright -+ notice, this list of conditions and the following disclaimer in the -+ documentation and/or other materials provided with the distribution. -+ * Neither the name of the copyright holder nor the -+ names of its contributors may be used to endorse or promote products -+ derived from this software without specific prior written permission. -+ -+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY -+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+*/ -+ -+#include -+#include "arm-mem.h" -+ -+/* Prevent the stack from becoming executable */ -+#if defined(__linux__) && defined(__ELF__) -+.section .note.GNU-stack,"",%progbits -+#endif -+ -+ .text -+ .arch armv6 -+ .object_arch armv4 -+ .arm -+ .altmacro -+ .p2align 2 -+ -+.macro memcmp_process_head unaligned -+ .if unaligned -+ ldr DAT0, [S_1], #4 -+ ldr DAT1, [S_1], #4 -+ ldr DAT2, [S_1], #4 -+ ldr DAT3, [S_1], #4 -+ .else -+ ldmia S_1!, {DAT0, DAT1, DAT2, DAT3} -+ .endif -+ ldmia S_2!, {DAT4, DAT5, DAT6, DAT7} -+.endm -+ -+.macro memcmp_process_tail -+ cmp DAT0, DAT4 -+ cmpeq DAT1, DAT5 -+ cmpeq DAT2, DAT6 -+ cmpeq DAT3, DAT7 -+ bne 200f -+.endm -+ -+.macro memcmp_leading_31bytes -+ movs DAT0, OFF, lsl #31 -+ ldrmib DAT0, [S_1], #1 -+ ldrcsh DAT1, [S_1], #2 -+ ldrmib DAT4, [S_2], #1 -+ ldrcsh DAT5, [S_2], #2 -+ movpl DAT0, #0 -+ movcc DAT1, #0 -+ movpl DAT4, #0 -+ movcc DAT5, #0 -+ submi N, N, #1 -+ subcs N, N, #2 -+ cmp DAT0, DAT4 -+ cmpeq DAT1, DAT5 -+ bne 200f -+ movs DAT0, OFF, lsl #29 -+ ldrmi DAT0, [S_1], #4 -+ ldrcs DAT1, [S_1], #4 -+ ldrcs DAT2, [S_1], #4 -+ ldrmi DAT4, [S_2], #4 -+ ldmcsia S_2!, {DAT5, DAT6} -+ movpl DAT0, #0 -+ movcc DAT1, #0 -+ movcc DAT2, #0 -+ movpl DAT4, #0 -+ movcc DAT5, #0 -+ movcc DAT6, #0 -+ submi N, N, #4 -+ subcs N, N, #8 -+ cmp DAT0, DAT4 -+ cmpeq DAT1, DAT5 -+ cmpeq DAT2, DAT6 -+ bne 200f -+ tst OFF, #16 -+ beq 105f -+ memcmp_process_head 1 -+ sub N, N, #16 -+ memcmp_process_tail -+105: -+.endm -+ -+.macro memcmp_trailing_15bytes unaligned -+ movs N, N, lsl #29 -+ .if unaligned -+ ldrcs DAT0, [S_1], #4 -+ ldrcs DAT1, [S_1], #4 -+ .else -+ ldmcsia S_1!, {DAT0, DAT1} -+ .endif -+ ldrmi DAT2, [S_1], #4 -+ ldmcsia S_2!, {DAT4, DAT5} -+ ldrmi DAT6, [S_2], #4 -+ movcc DAT0, #0 -+ movcc DAT1, #0 -+ movpl DAT2, #0 -+ movcc DAT4, #0 -+ movcc DAT5, #0 -+ movpl DAT6, #0 -+ cmp DAT0, DAT4 -+ cmpeq DAT1, DAT5 -+ cmpeq DAT2, DAT6 -+ bne 200f -+ movs N, N, lsl #2 -+ ldrcsh DAT0, [S_1], #2 -+ ldrmib DAT1, [S_1] -+ ldrcsh DAT4, [S_2], #2 -+ ldrmib DAT5, [S_2] -+ movcc DAT0, #0 -+ movpl DAT1, #0 -+ movcc DAT4, #0 -+ movpl DAT5, #0 -+ cmp DAT0, DAT4 -+ cmpeq DAT1, DAT5 -+ bne 200f -+.endm -+ -+.macro memcmp_long_inner_loop unaligned -+110: -+ memcmp_process_head unaligned -+ pld [S_2, #prefetch_distance*32 + 16] -+ memcmp_process_tail -+ memcmp_process_head unaligned -+ pld [S_1, OFF] -+ memcmp_process_tail -+ subs N, N, #32 -+ bhs 110b -+ /* Just before the final (prefetch_distance+1) 32-byte blocks, -+ * deal with final preloads */ -+ preload_trailing 0, S_1, N, DAT0 -+ preload_trailing 0, S_2, N, DAT0 -+ add N, N, #(prefetch_distance+2)*32 - 16 -+120: -+ memcmp_process_head unaligned -+ memcmp_process_tail -+ subs N, N, #16 -+ bhs 120b -+ /* Trailing words and bytes */ -+ tst N, #15 -+ beq 199f -+ memcmp_trailing_15bytes unaligned -+199: /* Reached end without detecting a difference */ -+ mov a1, #0 -+ setend le -+ pop {DAT1-DAT6, pc} -+.endm -+ -+.macro memcmp_short_inner_loop unaligned -+ subs N, N, #16 /* simplifies inner loop termination */ -+ blo 122f -+120: -+ memcmp_process_head unaligned -+ memcmp_process_tail -+ subs N, N, #16 -+ bhs 120b -+122: /* Trailing words and bytes */ -+ tst N, #15 -+ beq 199f -+ memcmp_trailing_15bytes unaligned -+199: /* Reached end without detecting a difference */ -+ mov a1, #0 -+ setend le -+ pop {DAT1-DAT6, pc} -+.endm -+ -+/* -+ * int memcmp(const void *s1, const void *s2, size_t n); -+ * On entry: -+ * a1 = pointer to buffer 1 -+ * a2 = pointer to buffer 2 -+ * a3 = number of bytes to compare (as unsigned chars) -+ * On exit: -+ * a1 = >0/=0/<0 if s1 >/=/< s2 -+ */ -+ -+.set prefetch_distance, 2 -+ -+ENTRY(memcmp) -+ S_1 .req a1 -+ S_2 .req a2 -+ N .req a3 -+ DAT0 .req a4 -+ DAT1 .req v1 -+ DAT2 .req v2 -+ DAT3 .req v3 -+ DAT4 .req v4 -+ DAT5 .req v5 -+ DAT6 .req v6 -+ DAT7 .req ip -+ OFF .req lr -+ -+ push {DAT1-DAT6, lr} -+ setend be /* lowest-addressed bytes are most significant */ -+ -+ /* To preload ahead as we go, we need at least (prefetch_distance+2) 32-byte blocks */ -+ cmp N, #(prefetch_distance+3)*32 - 1 -+ blo 170f -+ -+ /* Long case */ -+ /* Adjust N so that the decrement instruction can also test for -+ * inner loop termination. We want it to stop when there are -+ * (prefetch_distance+1) complete blocks to go. */ -+ sub N, N, #(prefetch_distance+2)*32 -+ preload_leading_step1 0, DAT0, S_1 -+ preload_leading_step1 0, DAT1, S_2 -+ tst S_2, #31 -+ beq 154f -+ rsb OFF, S_2, #0 /* no need to AND with 15 here */ -+ preload_leading_step2 0, DAT0, S_1, OFF, DAT2 -+ preload_leading_step2 0, DAT1, S_2, OFF, DAT2 -+ memcmp_leading_31bytes -+154: /* Second source now cacheline (32-byte) aligned; we have at -+ * least one prefetch to go. */ -+ /* Prefetch offset is best selected such that it lies in the -+ * first 8 of each 32 bytes - but it's just as easy to aim for -+ * the first one */ -+ and OFF, S_1, #31 -+ rsb OFF, OFF, #32*prefetch_distance -+ tst S_1, #3 -+ bne 140f -+ memcmp_long_inner_loop 0 -+140: memcmp_long_inner_loop 1 -+ -+170: /* Short case */ -+ teq N, #0 -+ beq 199f -+ preload_all 0, 0, 0, S_1, N, DAT0, DAT1 -+ preload_all 0, 0, 0, S_2, N, DAT0, DAT1 -+ tst S_2, #3 -+ beq 174f -+172: subs N, N, #1 -+ blo 199f -+ ldrb DAT0, [S_1], #1 -+ ldrb DAT4, [S_2], #1 -+ cmp DAT0, DAT4 -+ bne 200f -+ tst S_2, #3 -+ bne 172b -+174: /* Second source now 4-byte aligned; we have 0 or more bytes to go */ -+ tst S_1, #3 -+ bne 140f -+ memcmp_short_inner_loop 0 -+140: memcmp_short_inner_loop 1 -+ -+200: /* Difference found: determine sign. */ -+ movhi a1, #1 -+ movlo a1, #-1 -+ setend le -+ pop {DAT1-DAT6, pc} -+ -+ .unreq S_1 -+ .unreq S_2 -+ .unreq N -+ .unreq DAT0 -+ .unreq DAT1 -+ .unreq DAT2 -+ .unreq DAT3 -+ .unreq DAT4 -+ .unreq DAT5 -+ .unreq DAT6 -+ .unreq DAT7 -+ .unreq OFF -+ENDPROC(memcmp) ---- /dev/null -+++ b/arch/arm/lib/memcpy_rpi.S -@@ -0,0 +1,61 @@ -+/* -+Copyright (c) 2013, Raspberry Pi Foundation -+Copyright (c) 2013, RISC OS Open Ltd -+All rights reserved. -+ -+Redistribution and use in source and binary forms, with or without -+modification, are permitted provided that the following conditions are met: -+ * Redistributions of source code must retain the above copyright -+ notice, this list of conditions and the following disclaimer. -+ * Redistributions in binary form must reproduce the above copyright -+ notice, this list of conditions and the following disclaimer in the -+ documentation and/or other materials provided with the distribution. -+ * Neither the name of the copyright holder nor the -+ names of its contributors may be used to endorse or promote products -+ derived from this software without specific prior written permission. -+ -+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY -+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+*/ -+ -+#include -+#include "arm-mem.h" -+#include "memcpymove.h" -+ -+/* Prevent the stack from becoming executable */ -+#if defined(__linux__) && defined(__ELF__) -+.section .note.GNU-stack,"",%progbits -+#endif -+ -+ .text -+ .arch armv6 -+ .object_arch armv4 -+ .arm -+ .altmacro -+ .p2align 2 -+ -+/* -+ * void *memcpy(void * restrict s1, const void * restrict s2, size_t n); -+ * On entry: -+ * a1 = pointer to destination -+ * a2 = pointer to source -+ * a3 = number of bytes to copy -+ * On exit: -+ * a1 preserved -+ */ -+ -+.set prefetch_distance, 3 -+ -+ENTRY(mmiocpy) -+ENTRY(memcpy) -+ memcpy 0 -+ENDPROC(memcpy) -+ENDPROC(mmiocpy) ---- /dev/null -+++ b/arch/arm/lib/memcpymove.h -@@ -0,0 +1,506 @@ -+/* -+Copyright (c) 2013, Raspberry Pi Foundation -+Copyright (c) 2013, RISC OS Open Ltd -+All rights reserved. -+ -+Redistribution and use in source and binary forms, with or without -+modification, are permitted provided that the following conditions are met: -+ * Redistributions of source code must retain the above copyright -+ notice, this list of conditions and the following disclaimer. -+ * Redistributions in binary form must reproduce the above copyright -+ notice, this list of conditions and the following disclaimer in the -+ documentation and/or other materials provided with the distribution. -+ * Neither the name of the copyright holder nor the -+ names of its contributors may be used to endorse or promote products -+ derived from this software without specific prior written permission. -+ -+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY -+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+*/ -+ -+.macro unaligned_words backwards, align, use_pld, words, r0, r1, r2, r3, r4, r5, r6, r7, r8 -+ .if words == 1 -+ .if backwards -+ mov r1, r0, lsl #32-align*8 -+ ldr r0, [S, #-4]! -+ orr r1, r1, r0, lsr #align*8 -+ str r1, [D, #-4]! -+ .else -+ mov r0, r1, lsr #align*8 -+ ldr r1, [S, #4]! -+ orr r0, r0, r1, lsl #32-align*8 -+ str r0, [D], #4 -+ .endif -+ .elseif words == 2 -+ .if backwards -+ ldr r1, [S, #-4]! -+ mov r2, r0, lsl #32-align*8 -+ ldr r0, [S, #-4]! -+ orr r2, r2, r1, lsr #align*8 -+ mov r1, r1, lsl #32-align*8 -+ orr r1, r1, r0, lsr #align*8 -+ stmdb D!, {r1, r2} -+ .else -+ ldr r1, [S, #4]! -+ mov r0, r2, lsr #align*8 -+ ldr r2, [S, #4]! -+ orr r0, r0, r1, lsl #32-align*8 -+ mov r1, r1, lsr #align*8 -+ orr r1, r1, r2, lsl #32-align*8 -+ stmia D!, {r0, r1} -+ .endif -+ .elseif words == 4 -+ .if backwards -+ ldmdb S!, {r2, r3} -+ mov r4, r0, lsl #32-align*8 -+ ldmdb S!, {r0, r1} -+ orr r4, r4, r3, lsr #align*8 -+ mov r3, r3, lsl #32-align*8 -+ orr r3, r3, r2, lsr #align*8 -+ mov r2, r2, lsl #32-align*8 -+ orr r2, r2, r1, lsr #align*8 -+ mov r1, r1, lsl #32-align*8 -+ orr r1, r1, r0, lsr #align*8 -+ stmdb D!, {r1, r2, r3, r4} -+ .else -+ ldmib S!, {r1, r2} -+ mov r0, r4, lsr #align*8 -+ ldmib S!, {r3, r4} -+ orr r0, r0, r1, lsl #32-align*8 -+ mov r1, r1, lsr #align*8 -+ orr r1, r1, r2, lsl #32-align*8 -+ mov r2, r2, lsr #align*8 -+ orr r2, r2, r3, lsl #32-align*8 -+ mov r3, r3, lsr #align*8 -+ orr r3, r3, r4, lsl #32-align*8 -+ stmia D!, {r0, r1, r2, r3} -+ .endif -+ .elseif words == 8 -+ .if backwards -+ ldmdb S!, {r4, r5, r6, r7} -+ mov r8, r0, lsl #32-align*8 -+ ldmdb S!, {r0, r1, r2, r3} -+ .if use_pld -+ pld [S, OFF] -+ .endif -+ orr r8, r8, r7, lsr #align*8 -+ mov r7, r7, lsl #32-align*8 -+ orr r7, r7, r6, lsr #align*8 -+ mov r6, r6, lsl #32-align*8 -+ orr r6, r6, r5, lsr #align*8 -+ mov r5, r5, lsl #32-align*8 -+ orr r5, r5, r4, lsr #align*8 -+ mov r4, r4, lsl #32-align*8 -+ orr r4, r4, r3, lsr #align*8 -+ mov r3, r3, lsl #32-align*8 -+ orr r3, r3, r2, lsr #align*8 -+ mov r2, r2, lsl #32-align*8 -+ orr r2, r2, r1, lsr #align*8 -+ mov r1, r1, lsl #32-align*8 -+ orr r1, r1, r0, lsr #align*8 -+ stmdb D!, {r5, r6, r7, r8} -+ stmdb D!, {r1, r2, r3, r4} -+ .else -+ ldmib S!, {r1, r2, r3, r4} -+ mov r0, r8, lsr #align*8 -+ ldmib S!, {r5, r6, r7, r8} -+ .if use_pld -+ pld [S, OFF] -+ .endif -+ orr r0, r0, r1, lsl #32-align*8 -+ mov r1, r1, lsr #align*8 -+ orr r1, r1, r2, lsl #32-align*8 -+ mov r2, r2, lsr #align*8 -+ orr r2, r2, r3, lsl #32-align*8 -+ mov r3, r3, lsr #align*8 -+ orr r3, r3, r4, lsl #32-align*8 -+ mov r4, r4, lsr #align*8 -+ orr r4, r4, r5, lsl #32-align*8 -+ mov r5, r5, lsr #align*8 -+ orr r5, r5, r6, lsl #32-align*8 -+ mov r6, r6, lsr #align*8 -+ orr r6, r6, r7, lsl #32-align*8 -+ mov r7, r7, lsr #align*8 -+ orr r7, r7, r8, lsl #32-align*8 -+ stmia D!, {r0, r1, r2, r3} -+ stmia D!, {r4, r5, r6, r7} -+ .endif -+ .endif -+.endm -+ -+.macro memcpy_leading_15bytes backwards, align -+ movs DAT1, DAT2, lsl #31 -+ sub N, N, DAT2 -+ .if backwards -+ ldrmib DAT0, [S, #-1]! -+ ldrcsh DAT1, [S, #-2]! -+ strmib DAT0, [D, #-1]! -+ strcsh DAT1, [D, #-2]! -+ .else -+ ldrmib DAT0, [S], #1 -+ ldrcsh DAT1, [S], #2 -+ strmib DAT0, [D], #1 -+ strcsh DAT1, [D], #2 -+ .endif -+ movs DAT1, DAT2, lsl #29 -+ .if backwards -+ ldrmi DAT0, [S, #-4]! -+ .if align == 0 -+ ldmcsdb S!, {DAT1, DAT2} -+ .else -+ ldrcs DAT2, [S, #-4]! -+ ldrcs DAT1, [S, #-4]! -+ .endif -+ strmi DAT0, [D, #-4]! -+ stmcsdb D!, {DAT1, DAT2} -+ .else -+ ldrmi DAT0, [S], #4 -+ .if align == 0 -+ ldmcsia S!, {DAT1, DAT2} -+ .else -+ ldrcs DAT1, [S], #4 -+ ldrcs DAT2, [S], #4 -+ .endif -+ strmi DAT0, [D], #4 -+ stmcsia D!, {DAT1, DAT2} -+ .endif -+.endm -+ -+.macro memcpy_trailing_15bytes backwards, align -+ movs N, N, lsl #29 -+ .if backwards -+ .if align == 0 -+ ldmcsdb S!, {DAT0, DAT1} -+ .else -+ ldrcs DAT1, [S, #-4]! -+ ldrcs DAT0, [S, #-4]! -+ .endif -+ ldrmi DAT2, [S, #-4]! -+ stmcsdb D!, {DAT0, DAT1} -+ strmi DAT2, [D, #-4]! -+ .else -+ .if align == 0 -+ ldmcsia S!, {DAT0, DAT1} -+ .else -+ ldrcs DAT0, [S], #4 -+ ldrcs DAT1, [S], #4 -+ .endif -+ ldrmi DAT2, [S], #4 -+ stmcsia D!, {DAT0, DAT1} -+ strmi DAT2, [D], #4 -+ .endif -+ movs N, N, lsl #2 -+ .if backwards -+ ldrcsh DAT0, [S, #-2]! -+ ldrmib DAT1, [S, #-1] -+ strcsh DAT0, [D, #-2]! -+ strmib DAT1, [D, #-1] -+ .else -+ ldrcsh DAT0, [S], #2 -+ ldrmib DAT1, [S] -+ strcsh DAT0, [D], #2 -+ strmib DAT1, [D] -+ .endif -+.endm -+ -+.macro memcpy_long_inner_loop backwards, align -+ .if align != 0 -+ .if backwards -+ ldr DAT0, [S, #-align]! -+ .else -+ ldr LAST, [S, #-align]! -+ .endif -+ .endif -+110: -+ .if align == 0 -+ .if backwards -+ ldmdb S!, {DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, LAST} -+ pld [S, OFF] -+ stmdb D!, {DAT4, DAT5, DAT6, LAST} -+ stmdb D!, {DAT0, DAT1, DAT2, DAT3} -+ .else -+ ldmia S!, {DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, LAST} -+ pld [S, OFF] -+ stmia D!, {DAT0, DAT1, DAT2, DAT3} -+ stmia D!, {DAT4, DAT5, DAT6, LAST} -+ .endif -+ .else -+ unaligned_words backwards, align, 1, 8, DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, DAT7, LAST -+ .endif -+ subs N, N, #32 -+ bhs 110b -+ /* Just before the final (prefetch_distance+1) 32-byte blocks, deal with final preloads */ -+ preload_trailing backwards, S, N, OFF -+ add N, N, #(prefetch_distance+2)*32 - 32 -+120: -+ .if align == 0 -+ .if backwards -+ ldmdb S!, {DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, LAST} -+ stmdb D!, {DAT4, DAT5, DAT6, LAST} -+ stmdb D!, {DAT0, DAT1, DAT2, DAT3} -+ .else -+ ldmia S!, {DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, LAST} -+ stmia D!, {DAT0, DAT1, DAT2, DAT3} -+ stmia D!, {DAT4, DAT5, DAT6, LAST} -+ .endif -+ .else -+ unaligned_words backwards, align, 0, 8, DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, DAT7, LAST -+ .endif -+ subs N, N, #32 -+ bhs 120b -+ tst N, #16 -+ .if align == 0 -+ .if backwards -+ ldmnedb S!, {DAT0, DAT1, DAT2, LAST} -+ stmnedb D!, {DAT0, DAT1, DAT2, LAST} -+ .else -+ ldmneia S!, {DAT0, DAT1, DAT2, LAST} -+ stmneia D!, {DAT0, DAT1, DAT2, LAST} -+ .endif -+ .else -+ beq 130f -+ unaligned_words backwards, align, 0, 4, DAT0, DAT1, DAT2, DAT3, LAST -+130: -+ .endif -+ /* Trailing words and bytes */ -+ tst N, #15 -+ beq 199f -+ .if align != 0 -+ add S, S, #align -+ .endif -+ memcpy_trailing_15bytes backwards, align -+199: -+ pop {DAT3, DAT4, DAT5, DAT6, DAT7} -+ pop {D, DAT1, DAT2, pc} -+.endm -+ -+.macro memcpy_medium_inner_loop backwards, align -+120: -+ .if backwards -+ .if align == 0 -+ ldmdb S!, {DAT0, DAT1, DAT2, LAST} -+ .else -+ ldr LAST, [S, #-4]! -+ ldr DAT2, [S, #-4]! -+ ldr DAT1, [S, #-4]! -+ ldr DAT0, [S, #-4]! -+ .endif -+ stmdb D!, {DAT0, DAT1, DAT2, LAST} -+ .else -+ .if align == 0 -+ ldmia S!, {DAT0, DAT1, DAT2, LAST} -+ .else -+ ldr DAT0, [S], #4 -+ ldr DAT1, [S], #4 -+ ldr DAT2, [S], #4 -+ ldr LAST, [S], #4 -+ .endif -+ stmia D!, {DAT0, DAT1, DAT2, LAST} -+ .endif -+ subs N, N, #16 -+ bhs 120b -+ /* Trailing words and bytes */ -+ tst N, #15 -+ beq 199f -+ memcpy_trailing_15bytes backwards, align -+199: -+ pop {D, DAT1, DAT2, pc} -+.endm -+ -+.macro memcpy_short_inner_loop backwards, align -+ tst N, #16 -+ .if backwards -+ .if align == 0 -+ ldmnedb S!, {DAT0, DAT1, DAT2, LAST} -+ .else -+ ldrne LAST, [S, #-4]! -+ ldrne DAT2, [S, #-4]! -+ ldrne DAT1, [S, #-4]! -+ ldrne DAT0, [S, #-4]! -+ .endif -+ stmnedb D!, {DAT0, DAT1, DAT2, LAST} -+ .else -+ .if align == 0 -+ ldmneia S!, {DAT0, DAT1, DAT2, LAST} -+ .else -+ ldrne DAT0, [S], #4 -+ ldrne DAT1, [S], #4 -+ ldrne DAT2, [S], #4 -+ ldrne LAST, [S], #4 -+ .endif -+ stmneia D!, {DAT0, DAT1, DAT2, LAST} -+ .endif -+ memcpy_trailing_15bytes backwards, align -+199: -+ pop {D, DAT1, DAT2, pc} -+.endm -+ -+.macro memcpy backwards -+ D .req a1 -+ S .req a2 -+ N .req a3 -+ DAT0 .req a4 -+ DAT1 .req v1 -+ DAT2 .req v2 -+ DAT3 .req v3 -+ DAT4 .req v4 -+ DAT5 .req v5 -+ DAT6 .req v6 -+ DAT7 .req sl -+ LAST .req ip -+ OFF .req lr -+ -+ .cfi_startproc -+ -+ push {D, DAT1, DAT2, lr} -+ -+ .cfi_def_cfa_offset 16 -+ .cfi_rel_offset D, 0 -+ .cfi_undefined S -+ .cfi_undefined N -+ .cfi_undefined DAT0 -+ .cfi_rel_offset DAT1, 4 -+ .cfi_rel_offset DAT2, 8 -+ .cfi_undefined LAST -+ .cfi_rel_offset lr, 12 -+ -+ .if backwards -+ add D, D, N -+ add S, S, N -+ .endif -+ -+ /* See if we're guaranteed to have at least one 16-byte aligned 16-byte write */ -+ cmp N, #31 -+ blo 170f -+ /* To preload ahead as we go, we need at least (prefetch_distance+2) 32-byte blocks */ -+ cmp N, #(prefetch_distance+3)*32 - 1 -+ blo 160f -+ -+ /* Long case */ -+ push {DAT3, DAT4, DAT5, DAT6, DAT7} -+ -+ .cfi_def_cfa_offset 36 -+ .cfi_rel_offset D, 20 -+ .cfi_rel_offset DAT1, 24 -+ .cfi_rel_offset DAT2, 28 -+ .cfi_rel_offset DAT3, 0 -+ .cfi_rel_offset DAT4, 4 -+ .cfi_rel_offset DAT5, 8 -+ .cfi_rel_offset DAT6, 12 -+ .cfi_rel_offset DAT7, 16 -+ .cfi_rel_offset lr, 32 -+ -+ /* Adjust N so that the decrement instruction can also test for -+ * inner loop termination. We want it to stop when there are -+ * (prefetch_distance+1) complete blocks to go. */ -+ sub N, N, #(prefetch_distance+2)*32 -+ preload_leading_step1 backwards, DAT0, S -+ .if backwards -+ /* Bug in GAS: it accepts, but mis-assembles the instruction -+ * ands DAT2, D, #60, 2 -+ * which sets DAT2 to the number of leading bytes until destination is aligned and also clears C (sets borrow) -+ */ -+ .word 0xE210513C -+ beq 154f -+ .else -+ ands DAT2, D, #15 -+ beq 154f -+ rsb DAT2, DAT2, #16 /* number of leading bytes until destination aligned */ -+ .endif -+ preload_leading_step2 backwards, DAT0, S, DAT2, OFF -+ memcpy_leading_15bytes backwards, 1 -+154: /* Destination now 16-byte aligned; we have at least one prefetch as well as at least one 16-byte output block */ -+ /* Prefetch offset is best selected such that it lies in the first 8 of each 32 bytes - but it's just as easy to aim for the first one */ -+ .if backwards -+ rsb OFF, S, #3 -+ and OFF, OFF, #28 -+ sub OFF, OFF, #32*(prefetch_distance+1) -+ .else -+ and OFF, S, #28 -+ rsb OFF, OFF, #32*prefetch_distance -+ .endif -+ movs DAT0, S, lsl #31 -+ bhi 157f -+ bcs 156f -+ bmi 155f -+ memcpy_long_inner_loop backwards, 0 -+155: memcpy_long_inner_loop backwards, 1 -+156: memcpy_long_inner_loop backwards, 2 -+157: memcpy_long_inner_loop backwards, 3 -+ -+ .cfi_def_cfa_offset 16 -+ .cfi_rel_offset D, 0 -+ .cfi_rel_offset DAT1, 4 -+ .cfi_rel_offset DAT2, 8 -+ .cfi_same_value DAT3 -+ .cfi_same_value DAT4 -+ .cfi_same_value DAT5 -+ .cfi_same_value DAT6 -+ .cfi_same_value DAT7 -+ .cfi_rel_offset lr, 12 -+ -+160: /* Medium case */ -+ preload_all backwards, 0, 0, S, N, DAT2, OFF -+ sub N, N, #16 /* simplifies inner loop termination */ -+ .if backwards -+ ands DAT2, D, #15 -+ beq 164f -+ .else -+ ands DAT2, D, #15 -+ beq 164f -+ rsb DAT2, DAT2, #16 -+ .endif -+ memcpy_leading_15bytes backwards, align -+164: /* Destination now 16-byte aligned; we have at least one 16-byte output block */ -+ tst S, #3 -+ bne 140f -+ memcpy_medium_inner_loop backwards, 0 -+140: memcpy_medium_inner_loop backwards, 1 -+ -+170: /* Short case, less than 31 bytes, so no guarantee of at least one 16-byte block */ -+ teq N, #0 -+ beq 199f -+ preload_all backwards, 1, 0, S, N, DAT2, LAST -+ tst D, #3 -+ beq 174f -+172: subs N, N, #1 -+ blo 199f -+ .if backwards -+ ldrb DAT0, [S, #-1]! -+ strb DAT0, [D, #-1]! -+ .else -+ ldrb DAT0, [S], #1 -+ strb DAT0, [D], #1 -+ .endif -+ tst D, #3 -+ bne 172b -+174: /* Destination now 4-byte aligned; we have 0 or more output bytes to go */ -+ tst S, #3 -+ bne 140f -+ memcpy_short_inner_loop backwards, 0 -+140: memcpy_short_inner_loop backwards, 1 -+ -+ .cfi_endproc -+ -+ .unreq D -+ .unreq S -+ .unreq N -+ .unreq DAT0 -+ .unreq DAT1 -+ .unreq DAT2 -+ .unreq DAT3 -+ .unreq DAT4 -+ .unreq DAT5 -+ .unreq DAT6 -+ .unreq DAT7 -+ .unreq LAST -+ .unreq OFF -+.endm ---- /dev/null -+++ b/arch/arm/lib/memmove_rpi.S -@@ -0,0 +1,61 @@ -+/* -+Copyright (c) 2013, Raspberry Pi Foundation -+Copyright (c) 2013, RISC OS Open Ltd -+All rights reserved. -+ -+Redistribution and use in source and binary forms, with or without -+modification, are permitted provided that the following conditions are met: -+ * Redistributions of source code must retain the above copyright -+ notice, this list of conditions and the following disclaimer. -+ * Redistributions in binary form must reproduce the above copyright -+ notice, this list of conditions and the following disclaimer in the -+ documentation and/or other materials provided with the distribution. -+ * Neither the name of the copyright holder nor the -+ names of its contributors may be used to endorse or promote products -+ derived from this software without specific prior written permission. -+ -+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY -+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+*/ -+ -+#include -+#include "arm-mem.h" -+#include "memcpymove.h" -+ -+/* Prevent the stack from becoming executable */ -+#if defined(__linux__) && defined(__ELF__) -+.section .note.GNU-stack,"",%progbits -+#endif -+ -+ .text -+ .arch armv6 -+ .object_arch armv4 -+ .arm -+ .altmacro -+ .p2align 2 -+ -+/* -+ * void *memmove(void *s1, const void *s2, size_t n); -+ * On entry: -+ * a1 = pointer to destination -+ * a2 = pointer to source -+ * a3 = number of bytes to copy -+ * On exit: -+ * a1 preserved -+ */ -+ -+.set prefetch_distance, 3 -+ -+ENTRY(memmove) -+ cmp a2, a1 -+ bpl memcpy /* pl works even over -1 - 0 and 0x7fffffff - 0x80000000 boundaries */ -+ memcpy 1 -+ENDPROC(memmove) ---- /dev/null -+++ b/arch/arm/lib/memset_rpi.S -@@ -0,0 +1,123 @@ -+/* -+Copyright (c) 2013, Raspberry Pi Foundation -+Copyright (c) 2013, RISC OS Open Ltd -+All rights reserved. -+ -+Redistribution and use in source and binary forms, with or without -+modification, are permitted provided that the following conditions are met: -+ * Redistributions of source code must retain the above copyright -+ notice, this list of conditions and the following disclaimer. -+ * Redistributions in binary form must reproduce the above copyright -+ notice, this list of conditions and the following disclaimer in the -+ documentation and/or other materials provided with the distribution. -+ * Neither the name of the copyright holder nor the -+ names of its contributors may be used to endorse or promote products -+ derived from this software without specific prior written permission. -+ -+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY -+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+*/ -+ -+#include -+#include "arm-mem.h" -+ -+/* Prevent the stack from becoming executable */ -+#if defined(__linux__) && defined(__ELF__) -+.section .note.GNU-stack,"",%progbits -+#endif -+ -+ .text -+ .arch armv6 -+ .object_arch armv4 -+ .arm -+ .altmacro -+ .p2align 2 -+ -+/* -+ * void *memset(void *s, int c, size_t n); -+ * On entry: -+ * a1 = pointer to buffer to fill -+ * a2 = byte pattern to fill with (caller-narrowed) -+ * a3 = number of bytes to fill -+ * On exit: -+ * a1 preserved -+ */ -+ENTRY(mmioset) -+ENTRY(memset) -+ S .req a1 -+ DAT0 .req a2 -+ N .req a3 -+ DAT1 .req a4 -+ DAT2 .req ip -+ DAT3 .req lr -+ -+ orr DAT0, DAT0, lsl #8 -+ push {S, lr} -+ orr DAT0, DAT0, lsl #16 -+ mov DAT1, DAT0 -+ -+ /* See if we're guaranteed to have at least one 16-byte aligned 16-byte write */ -+ cmp N, #31 -+ blo 170f -+ -+161: sub N, N, #16 /* simplifies inner loop termination */ -+ /* Leading words and bytes */ -+ tst S, #15 -+ beq 164f -+ rsb DAT3, S, #0 /* bits 0-3 = number of leading bytes until aligned */ -+ movs DAT2, DAT3, lsl #31 -+ submi N, N, #1 -+ strmib DAT0, [S], #1 -+ subcs N, N, #2 -+ strcsh DAT0, [S], #2 -+ movs DAT2, DAT3, lsl #29 -+ submi N, N, #4 -+ strmi DAT0, [S], #4 -+ subcs N, N, #8 -+ stmcsia S!, {DAT0, DAT1} -+164: /* Delayed set up of DAT2 and DAT3 so we could use them as scratch registers above */ -+ mov DAT2, DAT0 -+ mov DAT3, DAT0 -+ /* Now the inner loop of 16-byte stores */ -+165: stmia S!, {DAT0, DAT1, DAT2, DAT3} -+ subs N, N, #16 -+ bhs 165b -+166: /* Trailing words and bytes */ -+ movs N, N, lsl #29 -+ stmcsia S!, {DAT0, DAT1} -+ strmi DAT0, [S], #4 -+ movs N, N, lsl #2 -+ strcsh DAT0, [S], #2 -+ strmib DAT0, [S] -+199: pop {S, pc} -+ -+170: /* Short case */ -+ mov DAT2, DAT0 -+ mov DAT3, DAT0 -+ tst S, #3 -+ beq 174f -+172: subs N, N, #1 -+ blo 199b -+ strb DAT0, [S], #1 -+ tst S, #3 -+ bne 172b -+174: tst N, #16 -+ stmneia S!, {DAT0, DAT1, DAT2, DAT3} -+ b 166b -+ -+ .unreq S -+ .unreq DAT0 -+ .unreq N -+ .unreq DAT1 -+ .unreq DAT2 -+ .unreq DAT3 -+ENDPROC(memset) -+ENDPROC(mmioset) ---- a/arch/arm/lib/uaccess_with_memcpy.c -+++ b/arch/arm/lib/uaccess_with_memcpy.c -@@ -22,6 +22,14 @@ - #include - #include - -+#ifndef COPY_FROM_USER_THRESHOLD -+#define COPY_FROM_USER_THRESHOLD 64 -+#endif -+ -+#ifndef COPY_TO_USER_THRESHOLD -+#define COPY_TO_USER_THRESHOLD 64 -+#endif -+ - static int - pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) - { -@@ -84,7 +92,44 @@ pin_page_for_write(const void __user *_a - return 1; - } - --static unsigned long noinline -+static int -+pin_page_for_read(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) -+{ -+ unsigned long addr = (unsigned long)_addr; -+ pgd_t *pgd; -+ pmd_t *pmd; -+ pte_t *pte; -+ pud_t *pud; -+ spinlock_t *ptl; -+ -+ pgd = pgd_offset(current->mm, addr); -+ if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd))) -+ { -+ return 0; -+ } -+ pud = pud_offset(pgd, addr); -+ if (unlikely(pud_none(*pud) || pud_bad(*pud))) -+ { -+ return 0; -+ } -+ -+ pmd = pmd_offset(pud, addr); -+ if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd))) -+ return 0; -+ -+ pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl); -+ if (unlikely(!pte_present(*pte) || !pte_young(*pte))) { -+ pte_unmap_unlock(pte, ptl); -+ return 0; -+ } -+ -+ *ptep = pte; -+ *ptlp = ptl; -+ -+ return 1; -+} -+ -+unsigned long noinline - __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n) - { - unsigned long ua_flags; -@@ -137,6 +182,57 @@ out: - return n; - } - -+unsigned long noinline -+__copy_from_user_memcpy(void *to, const void __user *from, unsigned long n) -+{ -+ unsigned long ua_flags; -+ int atomic; -+ -+ if (unlikely(segment_eq(get_fs(), KERNEL_DS))) { -+ memcpy(to, (const void *)from, n); -+ return 0; -+ } -+ -+ /* the mmap semaphore is taken only if not in an atomic context */ -+ atomic = in_atomic(); -+ -+ if (!atomic) -+ down_read(¤t->mm->mmap_sem); -+ while (n) { -+ pte_t *pte; -+ spinlock_t *ptl; -+ int tocopy; -+ -+ while (!pin_page_for_read(from, &pte, &ptl)) { -+ char temp; -+ if (!atomic) -+ up_read(¤t->mm->mmap_sem); -+ if (__get_user(temp, (char __user *)from)) -+ goto out; -+ if (!atomic) -+ down_read(¤t->mm->mmap_sem); -+ } -+ -+ tocopy = (~(unsigned long)from & ~PAGE_MASK) + 1; -+ if (tocopy > n) -+ tocopy = n; -+ -+ ua_flags = uaccess_save_and_enable(); -+ memcpy(to, (const void *)from, tocopy); -+ uaccess_restore(ua_flags); -+ to += tocopy; -+ from += tocopy; -+ n -= tocopy; -+ -+ pte_unmap_unlock(pte, ptl); -+ } -+ if (!atomic) -+ up_read(¤t->mm->mmap_sem); -+ -+out: -+ return n; -+} -+ - unsigned long - arm_copy_to_user(void __user *to, const void *from, unsigned long n) - { -@@ -147,7 +243,7 @@ arm_copy_to_user(void __user *to, const - * With frame pointer disabled, tail call optimization kicks in - * as well making this test almost invisible. - */ -- if (n < 64) { -+ if (n < COPY_TO_USER_THRESHOLD) { - unsigned long ua_flags = uaccess_save_and_enable(); - n = __copy_to_user_std(to, from, n); - uaccess_restore(ua_flags); -@@ -156,6 +252,26 @@ arm_copy_to_user(void __user *to, const - } - return n; - } -+ -+unsigned long __must_check -+arm_copy_from_user(void *to, const void __user *from, unsigned long n) -+{ -+ /* -+ * This test is stubbed out of the main function above to keep -+ * the overhead for small copies low by avoiding a large -+ * register dump on the stack just to reload them right away. -+ * With frame pointer disabled, tail call optimization kicks in -+ * as well making this test almost invisible. -+ */ -+ if (n < COPY_TO_USER_THRESHOLD) { -+ unsigned long ua_flags = uaccess_save_and_enable(); -+ n = __copy_from_user_std(to, from, n); -+ uaccess_restore(ua_flags); -+ } else { -+ n = __copy_from_user_memcpy(to, from, n); -+ } -+ return n; -+} - - static unsigned long noinline - __clear_user_memset(void __user *addr, unsigned long n) ---- a/arch/arm/mach-bcm/Kconfig -+++ b/arch/arm/mach-bcm/Kconfig -@@ -174,6 +174,13 @@ config ARCH_BCM_53573 - The base chip is BCM53573 and there are some packaging modifications - like BCM47189 and BCM47452. - -+config BCM2835_FAST_MEMCPY -+ bool "Enable optimized __copy_to_user and __copy_from_user" -+ depends on ARCH_BCM2835 && ARCH_MULTI_V6 -+ default y -+ help -+ Optimized versions of __copy_to_user and __copy_from_user for Pi1. -+ - config ARCH_BCM_63XX - bool "Broadcom BCM63xx DSL SoC" - depends on ARCH_MULTI_V7 diff --git a/target/linux/brcm2708/patches-4.9/0064-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch b/target/linux/brcm2708/patches-4.9/0064-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch deleted file mode 100644 index 5d73a2824662..000000000000 --- a/target/linux/brcm2708/patches-4.9/0064-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 7e8bb86739df17e38a0ebe6e17b7a9056ab421e9 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 25 Jun 2015 12:16:11 +0100 -Subject: [PATCH] gpio-poweroff: Allow it to work on Raspberry Pi - -The Raspberry Pi firmware manages the power-down and reboot -process. To do this it installs a pm_power_off handler, causing -the gpio-poweroff module to abort the probe function. - -This patch introduces a "force" DT property that overrides that -behaviour, and also adds a DT overlay to enable and control it. - -Note that running in an active-low configuration (DT parameter -"active_low") requires a custom dt-blob.bin and probably won't -allow a reboot without switching off, so an external inversion -of the trigger signal may be preferable. ---- - drivers/power/reset/gpio-poweroff.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - ---- a/drivers/power/reset/gpio-poweroff.c -+++ b/drivers/power/reset/gpio-poweroff.c -@@ -49,9 +49,11 @@ static int gpio_poweroff_probe(struct pl - { - bool input = false; - enum gpiod_flags flags; -+ bool force = false; - - /* If a pm_power_off function has already been added, leave it alone */ -- if (pm_power_off != NULL) { -+ force = of_property_read_bool(pdev->dev.of_node, "force"); -+ if (!force && (pm_power_off != NULL)) { - dev_err(&pdev->dev, - "%s: pm_power_off function already registered", - __func__); diff --git a/target/linux/brcm2708/patches-4.9/0065-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch b/target/linux/brcm2708/patches-4.9/0065-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch deleted file mode 100644 index b5ae3f954cf2..000000000000 --- a/target/linux/brcm2708/patches-4.9/0065-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch +++ /dev/null @@ -1,837 +0,0 @@ -From 157f59328885549a0f2c1fe35e9ec3aff0f0b52e Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 14 Jul 2015 14:32:47 +0100 -Subject: [PATCH] mfd: Add Raspberry Pi Sense HAT core driver - ---- - drivers/input/joystick/Kconfig | 8 + - drivers/input/joystick/Makefile | 1 + - drivers/input/joystick/rpisense-js.c | 153 ++++++++++++++++ - drivers/mfd/Kconfig | 8 + - drivers/mfd/Makefile | 1 + - drivers/mfd/rpisense-core.c | 157 +++++++++++++++++ - drivers/video/fbdev/Kconfig | 13 ++ - drivers/video/fbdev/Makefile | 1 + - drivers/video/fbdev/rpisense-fb.c | 293 +++++++++++++++++++++++++++++++ - include/linux/mfd/rpisense/core.h | 47 +++++ - include/linux/mfd/rpisense/framebuffer.h | 32 ++++ - include/linux/mfd/rpisense/joystick.h | 35 ++++ - 12 files changed, 749 insertions(+) - create mode 100644 drivers/input/joystick/rpisense-js.c - create mode 100644 drivers/mfd/rpisense-core.c - create mode 100644 drivers/video/fbdev/rpisense-fb.c - create mode 100644 include/linux/mfd/rpisense/core.h - create mode 100644 include/linux/mfd/rpisense/framebuffer.h - create mode 100644 include/linux/mfd/rpisense/joystick.h - ---- a/drivers/input/joystick/Kconfig -+++ b/drivers/input/joystick/Kconfig -@@ -330,4 +330,12 @@ config JOYSTICK_MAPLE - To compile this as a module choose M here: the module will be called - maplecontrol. - -+config JOYSTICK_RPISENSE -+ tristate "Raspberry Pi Sense HAT joystick" -+ depends on GPIOLIB && INPUT -+ select MFD_RPISENSE_CORE -+ -+ help -+ This is the joystick driver for the Raspberry Pi Sense HAT -+ - endif ---- a/drivers/input/joystick/Makefile -+++ b/drivers/input/joystick/Makefile -@@ -32,4 +32,5 @@ obj-$(CONFIG_JOYSTICK_WARRIOR) += warri - obj-$(CONFIG_JOYSTICK_XPAD) += xpad.o - obj-$(CONFIG_JOYSTICK_ZHENHUA) += zhenhua.o - obj-$(CONFIG_JOYSTICK_WALKERA0701) += walkera0701.o -+obj-$(CONFIG_JOYSTICK_RPISENSE) += rpisense-js.o - ---- /dev/null -+++ b/drivers/input/joystick/rpisense-js.c -@@ -0,0 +1,153 @@ -+/* -+ * Raspberry Pi Sense HAT joystick driver -+ * http://raspberrypi.org -+ * -+ * Copyright (C) 2015 Raspberry Pi -+ * -+ * Author: Serge Schneider -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ */ -+ -+#include -+ -+#include -+#include -+ -+static struct rpisense *rpisense; -+static unsigned char keymap[5] = {KEY_DOWN, KEY_RIGHT, KEY_UP, KEY_ENTER, KEY_LEFT,}; -+ -+static void keys_work_fn(struct work_struct *work) -+{ -+ int i; -+ static s32 prev_keys; -+ struct rpisense_js *rpisense_js = &rpisense->joystick; -+ s32 keys = rpisense_reg_read(rpisense, RPISENSE_KEYS); -+ s32 changes = keys ^ prev_keys; -+ -+ prev_keys = keys; -+ for (i = 0; i < 5; i++) { -+ if (changes & 1) { -+ input_report_key(rpisense_js->keys_dev, -+ keymap[i], keys & 1); -+ } -+ changes >>= 1; -+ keys >>= 1; -+ } -+ input_sync(rpisense_js->keys_dev); -+} -+ -+static irqreturn_t keys_irq_handler(int irq, void *pdev) -+{ -+ struct rpisense_js *rpisense_js = &rpisense->joystick; -+ -+ schedule_work(&rpisense_js->keys_work_s); -+ return IRQ_HANDLED; -+} -+ -+static int rpisense_js_probe(struct platform_device *pdev) -+{ -+ int ret; -+ int i; -+ struct rpisense_js *rpisense_js; -+ -+ rpisense = rpisense_get_dev(); -+ rpisense_js = &rpisense->joystick; -+ -+ INIT_WORK(&rpisense_js->keys_work_s, keys_work_fn); -+ -+ rpisense_js->keys_dev = input_allocate_device(); -+ if (!rpisense_js->keys_dev) { -+ dev_err(&pdev->dev, "Could not allocate input device.\n"); -+ return -ENOMEM; -+ } -+ -+ rpisense_js->keys_dev->evbit[0] = BIT_MASK(EV_KEY); -+ for (i = 0; i < ARRAY_SIZE(keymap); i++) { -+ set_bit(keymap[i], -+ rpisense_js->keys_dev->keybit); -+ } -+ -+ rpisense_js->keys_dev->name = "Raspberry Pi Sense HAT Joystick"; -+ rpisense_js->keys_dev->phys = "rpi-sense-joy/input0"; -+ rpisense_js->keys_dev->id.bustype = BUS_I2C; -+ rpisense_js->keys_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); -+ rpisense_js->keys_dev->keycode = keymap; -+ rpisense_js->keys_dev->keycodesize = sizeof(unsigned char); -+ rpisense_js->keys_dev->keycodemax = ARRAY_SIZE(keymap); -+ -+ ret = input_register_device(rpisense_js->keys_dev); -+ if (ret) { -+ dev_err(&pdev->dev, "Could not register input device.\n"); -+ goto err_keys_alloc; -+ } -+ -+ ret = gpiod_direction_input(rpisense_js->keys_desc); -+ if (ret) { -+ dev_err(&pdev->dev, "Could not set keys-int direction.\n"); -+ goto err_keys_reg; -+ } -+ -+ rpisense_js->keys_irq = gpiod_to_irq(rpisense_js->keys_desc); -+ if (rpisense_js->keys_irq < 0) { -+ dev_err(&pdev->dev, "Could not determine keys-int IRQ.\n"); -+ ret = rpisense_js->keys_irq; -+ goto err_keys_reg; -+ } -+ -+ ret = devm_request_irq(&pdev->dev, rpisense_js->keys_irq, -+ keys_irq_handler, IRQF_TRIGGER_RISING, -+ "keys", &pdev->dev); -+ if (ret) { -+ dev_err(&pdev->dev, "IRQ request failed.\n"); -+ goto err_keys_reg; -+ } -+ return 0; -+err_keys_reg: -+ input_unregister_device(rpisense_js->keys_dev); -+err_keys_alloc: -+ input_free_device(rpisense_js->keys_dev); -+ return ret; -+} -+ -+static int rpisense_js_remove(struct platform_device *pdev) -+{ -+ struct rpisense_js *rpisense_js = &rpisense->joystick; -+ -+ input_unregister_device(rpisense_js->keys_dev); -+ input_free_device(rpisense_js->keys_dev); -+ return 0; -+} -+ -+#ifdef CONFIG_OF -+static const struct of_device_id rpisense_js_id[] = { -+ { .compatible = "rpi,rpi-sense-js" }, -+ { }, -+}; -+MODULE_DEVICE_TABLE(of, rpisense_js_id); -+#endif -+ -+static struct platform_device_id rpisense_js_device_id[] = { -+ { .name = "rpi-sense-js" }, -+ { }, -+}; -+MODULE_DEVICE_TABLE(platform, rpisense_js_device_id); -+ -+static struct platform_driver rpisense_js_driver = { -+ .probe = rpisense_js_probe, -+ .remove = rpisense_js_remove, -+ .driver = { -+ .name = "rpi-sense-js", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+module_platform_driver(rpisense_js_driver); -+ -+MODULE_DESCRIPTION("Raspberry Pi Sense HAT joystick driver"); -+MODULE_AUTHOR("Serge Schneider "); -+MODULE_LICENSE("GPL"); ---- a/drivers/mfd/Kconfig -+++ b/drivers/mfd/Kconfig -@@ -10,6 +10,14 @@ config MFD_CORE - select IRQ_DOMAIN - default n - -+config MFD_RPISENSE_CORE -+ tristate "Raspberry Pi Sense HAT core functions" -+ depends on I2C -+ select MFD_CORE -+ help -+ This is the core driver for the Raspberry Pi Sense HAT. This provides -+ the necessary functions to communicate with the hardware. -+ - config MFD_CS5535 - tristate "AMD CS5535 and CS5536 southbridge core functions" - select MFD_CORE ---- a/drivers/mfd/Makefile -+++ b/drivers/mfd/Makefile -@@ -211,3 +211,4 @@ obj-$(CONFIG_INTEL_SOC_PMIC) += intel-so - obj-$(CONFIG_MFD_MT6397) += mt6397-core.o - - obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o -+obj-$(CONFIG_MFD_RPISENSE_CORE) += rpisense-core.o ---- /dev/null -+++ b/drivers/mfd/rpisense-core.c -@@ -0,0 +1,157 @@ -+/* -+ * Raspberry Pi Sense HAT core driver -+ * http://raspberrypi.org -+ * -+ * Copyright (C) 2015 Raspberry Pi -+ * -+ * Author: Serge Schneider -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * This driver is based on wm8350 implementation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static struct rpisense *rpisense; -+ -+static void rpisense_client_dev_register(struct rpisense *rpisense, -+ const char *name, -+ struct platform_device **pdev) -+{ -+ int ret; -+ -+ *pdev = platform_device_alloc(name, -1); -+ if (*pdev == NULL) { -+ dev_err(rpisense->dev, "Failed to allocate %s\n", name); -+ return; -+ } -+ -+ (*pdev)->dev.parent = rpisense->dev; -+ platform_set_drvdata(*pdev, rpisense); -+ ret = platform_device_add(*pdev); -+ if (ret != 0) { -+ dev_err(rpisense->dev, "Failed to register %s: %d\n", -+ name, ret); -+ platform_device_put(*pdev); -+ *pdev = NULL; -+ } -+} -+ -+static int rpisense_probe(struct i2c_client *i2c, -+ const struct i2c_device_id *id) -+{ -+ int ret; -+ struct rpisense_js *rpisense_js; -+ -+ rpisense = devm_kzalloc(&i2c->dev, sizeof(struct rpisense), GFP_KERNEL); -+ if (rpisense == NULL) -+ return -ENOMEM; -+ -+ i2c_set_clientdata(i2c, rpisense); -+ rpisense->dev = &i2c->dev; -+ rpisense->i2c_client = i2c; -+ -+ ret = rpisense_reg_read(rpisense, RPISENSE_WAI); -+ if (ret > 0) { -+ if (ret != 's') -+ return -EINVAL; -+ } else { -+ return ret; -+ } -+ ret = rpisense_reg_read(rpisense, RPISENSE_VER); -+ if (ret < 0) -+ return ret; -+ -+ dev_info(rpisense->dev, -+ "Raspberry Pi Sense HAT firmware version %i\n", ret); -+ -+ rpisense_js = &rpisense->joystick; -+ rpisense_js->keys_desc = devm_gpiod_get(&i2c->dev, -+ "keys-int", GPIOD_IN); -+ if (IS_ERR(rpisense_js->keys_desc)) { -+ dev_warn(&i2c->dev, "Failed to get keys-int descriptor.\n"); -+ rpisense_js->keys_desc = gpio_to_desc(23); -+ if (rpisense_js->keys_desc == NULL) { -+ dev_err(&i2c->dev, "GPIO23 fallback failed.\n"); -+ return PTR_ERR(rpisense_js->keys_desc); -+ } -+ } -+ rpisense_client_dev_register(rpisense, "rpi-sense-js", -+ &(rpisense->joystick.pdev)); -+ rpisense_client_dev_register(rpisense, "rpi-sense-fb", -+ &(rpisense->framebuffer.pdev)); -+ -+ return 0; -+} -+ -+static int rpisense_remove(struct i2c_client *i2c) -+{ -+ struct rpisense *rpisense = i2c_get_clientdata(i2c); -+ -+ platform_device_unregister(rpisense->joystick.pdev); -+ return 0; -+} -+ -+struct rpisense *rpisense_get_dev(void) -+{ -+ return rpisense; -+} -+EXPORT_SYMBOL_GPL(rpisense_get_dev); -+ -+s32 rpisense_reg_read(struct rpisense *rpisense, int reg) -+{ -+ int ret = i2c_smbus_read_byte_data(rpisense->i2c_client, reg); -+ -+ if (ret < 0) -+ dev_err(rpisense->dev, "Read from reg %d failed\n", reg); -+ /* Due to the BCM270x I2C clock stretching bug, some values -+ * may have MSB set. Clear it to avoid incorrect values. -+ * */ -+ return ret & 0x7F; -+} -+EXPORT_SYMBOL_GPL(rpisense_reg_read); -+ -+int rpisense_block_write(struct rpisense *rpisense, const char *buf, int count) -+{ -+ int ret = i2c_master_send(rpisense->i2c_client, buf, count); -+ -+ if (ret < 0) -+ dev_err(rpisense->dev, "Block write failed\n"); -+ return ret; -+} -+EXPORT_SYMBOL_GPL(rpisense_block_write); -+ -+static const struct i2c_device_id rpisense_i2c_id[] = { -+ { "rpi-sense", 0 }, -+ { } -+}; -+MODULE_DEVICE_TABLE(i2c, rpisense_i2c_id); -+ -+ -+static struct i2c_driver rpisense_driver = { -+ .driver = { -+ .name = "rpi-sense", -+ .owner = THIS_MODULE, -+ }, -+ .probe = rpisense_probe, -+ .remove = rpisense_remove, -+ .id_table = rpisense_i2c_id, -+}; -+ -+module_i2c_driver(rpisense_driver); -+ -+MODULE_DESCRIPTION("Raspberry Pi Sense HAT core driver"); -+MODULE_AUTHOR("Serge Schneider "); -+MODULE_LICENSE("GPL"); -+ ---- a/drivers/video/fbdev/Kconfig -+++ b/drivers/video/fbdev/Kconfig -@@ -2504,3 +2504,16 @@ config FB_SM712 - This driver is also available as a module. The module will be - called sm712fb. If you want to compile it as a module, say M - here and read . -+ -+config FB_RPISENSE -+ tristate "Raspberry Pi Sense HAT framebuffer" -+ depends on FB -+ select MFD_RPISENSE_CORE -+ select FB_SYS_FOPS -+ select FB_SYS_FILLRECT -+ select FB_SYS_COPYAREA -+ select FB_SYS_IMAGEBLIT -+ select FB_DEFERRED_IO -+ -+ help -+ This is the framebuffer driver for the Raspberry Pi Sense HAT ---- a/drivers/video/fbdev/Makefile -+++ b/drivers/video/fbdev/Makefile -@@ -147,6 +147,7 @@ obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o - obj-$(CONFIG_FB_MXS) += mxsfb.o - obj-$(CONFIG_FB_SSD1307) += ssd1307fb.o - obj-$(CONFIG_FB_SIMPLE) += simplefb.o -+obj-$(CONFIG_FB_RPISENSE) += rpisense-fb.o - - # the test framebuffer is last - obj-$(CONFIG_FB_VIRTUAL) += vfb.o ---- /dev/null -+++ b/drivers/video/fbdev/rpisense-fb.c -@@ -0,0 +1,293 @@ -+/* -+ * Raspberry Pi Sense HAT framebuffer driver -+ * http://raspberrypi.org -+ * -+ * Copyright (C) 2015 Raspberry Pi -+ * -+ * Author: Serge Schneider -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+static bool lowlight; -+module_param(lowlight, bool, 0); -+MODULE_PARM_DESC(lowlight, "Reduce LED matrix brightness to one third"); -+ -+static struct rpisense *rpisense; -+ -+struct rpisense_fb_param { -+ char __iomem *vmem; -+ u8 *vmem_work; -+ u32 vmemsize; -+ u8 *gamma; -+}; -+ -+static u8 gamma_default[32] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, -+ 0x02, 0x02, 0x03, 0x03, 0x04, 0x05, 0x06, 0x07, -+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0E, 0x0F, 0x11, -+ 0x12, 0x14, 0x15, 0x17, 0x19, 0x1B, 0x1D, 0x1F,}; -+ -+static u8 gamma_low[32] = {0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, -+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x02, 0x02, -+ 0x03, 0x03, 0x03, 0x04, 0x04, 0x05, 0x05, 0x06, -+ 0x06, 0x07, 0x07, 0x08, 0x08, 0x09, 0x0A, 0x0A,}; -+ -+static u8 gamma_user[32]; -+ -+static struct rpisense_fb_param rpisense_fb_param = { -+ .vmem = NULL, -+ .vmemsize = 128, -+ .gamma = gamma_default, -+}; -+ -+static struct fb_deferred_io rpisense_fb_defio; -+ -+static struct fb_fix_screeninfo rpisense_fb_fix = { -+ .id = "RPi-Sense FB", -+ .type = FB_TYPE_PACKED_PIXELS, -+ .visual = FB_VISUAL_TRUECOLOR, -+ .xpanstep = 0, -+ .ypanstep = 0, -+ .ywrapstep = 0, -+ .accel = FB_ACCEL_NONE, -+ .line_length = 16, -+}; -+ -+static struct fb_var_screeninfo rpisense_fb_var = { -+ .xres = 8, -+ .yres = 8, -+ .xres_virtual = 8, -+ .yres_virtual = 8, -+ .bits_per_pixel = 16, -+ .red = {11, 5, 0}, -+ .green = {5, 6, 0}, -+ .blue = {0, 5, 0}, -+}; -+ -+static ssize_t rpisense_fb_write(struct fb_info *info, -+ const char __user *buf, size_t count, -+ loff_t *ppos) -+{ -+ ssize_t res = fb_sys_write(info, buf, count, ppos); -+ -+ schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay); -+ return res; -+} -+ -+static void rpisense_fb_fillrect(struct fb_info *info, -+ const struct fb_fillrect *rect) -+{ -+ sys_fillrect(info, rect); -+ schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay); -+} -+ -+static void rpisense_fb_copyarea(struct fb_info *info, -+ const struct fb_copyarea *area) -+{ -+ sys_copyarea(info, area); -+ schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay); -+} -+ -+static void rpisense_fb_imageblit(struct fb_info *info, -+ const struct fb_image *image) -+{ -+ sys_imageblit(info, image); -+ schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay); -+} -+ -+static void rpisense_fb_deferred_io(struct fb_info *info, -+ struct list_head *pagelist) -+{ -+ int i; -+ int j; -+ u8 *vmem_work = rpisense_fb_param.vmem_work; -+ u16 *mem = (u16 *)rpisense_fb_param.vmem; -+ u8 *gamma = rpisense_fb_param.gamma; -+ -+ vmem_work[0] = 0; -+ for (j = 0; j < 8; j++) { -+ for (i = 0; i < 8; i++) { -+ vmem_work[(j * 24) + i + 1] = -+ gamma[(mem[(j * 8) + i] >> 11) & 0x1F]; -+ vmem_work[(j * 24) + (i + 8) + 1] = -+ gamma[(mem[(j * 8) + i] >> 6) & 0x1F]; -+ vmem_work[(j * 24) + (i + 16) + 1] = -+ gamma[(mem[(j * 8) + i]) & 0x1F]; -+ } -+ } -+ rpisense_block_write(rpisense, vmem_work, 193); -+} -+ -+static struct fb_deferred_io rpisense_fb_defio = { -+ .delay = HZ/100, -+ .deferred_io = rpisense_fb_deferred_io, -+}; -+ -+static int rpisense_fb_ioctl(struct fb_info *info, unsigned int cmd, -+ unsigned long arg) -+{ -+ switch (cmd) { -+ case SENSEFB_FBIOGET_GAMMA: -+ if (copy_to_user((void __user *) arg, rpisense_fb_param.gamma, -+ sizeof(u8[32]))) -+ return -EFAULT; -+ return 0; -+ case SENSEFB_FBIOSET_GAMMA: -+ if (copy_from_user(gamma_user, (void __user *)arg, -+ sizeof(u8[32]))) -+ return -EFAULT; -+ rpisense_fb_param.gamma = gamma_user; -+ schedule_delayed_work(&info->deferred_work, -+ rpisense_fb_defio.delay); -+ return 0; -+ case SENSEFB_FBIORESET_GAMMA: -+ switch (arg) { -+ case 0: -+ rpisense_fb_param.gamma = gamma_default; -+ break; -+ case 1: -+ rpisense_fb_param.gamma = gamma_low; -+ break; -+ case 2: -+ rpisense_fb_param.gamma = gamma_user; -+ break; -+ default: -+ return -EINVAL; -+ } -+ schedule_delayed_work(&info->deferred_work, -+ rpisense_fb_defio.delay); -+ break; -+ default: -+ return -EINVAL; -+ } -+ return 0; -+} -+ -+static struct fb_ops rpisense_fb_ops = { -+ .owner = THIS_MODULE, -+ .fb_read = fb_sys_read, -+ .fb_write = rpisense_fb_write, -+ .fb_fillrect = rpisense_fb_fillrect, -+ .fb_copyarea = rpisense_fb_copyarea, -+ .fb_imageblit = rpisense_fb_imageblit, -+ .fb_ioctl = rpisense_fb_ioctl, -+}; -+ -+static int rpisense_fb_probe(struct platform_device *pdev) -+{ -+ struct fb_info *info; -+ int ret = -ENOMEM; -+ struct rpisense_fb *rpisense_fb; -+ -+ rpisense = rpisense_get_dev(); -+ rpisense_fb = &rpisense->framebuffer; -+ -+ rpisense_fb_param.vmem = vzalloc(rpisense_fb_param.vmemsize); -+ if (!rpisense_fb_param.vmem) -+ return ret; -+ -+ rpisense_fb_param.vmem_work = devm_kmalloc(&pdev->dev, 193, GFP_KERNEL); -+ if (!rpisense_fb_param.vmem_work) -+ goto err_malloc; -+ -+ info = framebuffer_alloc(0, &pdev->dev); -+ if (!info) { -+ dev_err(&pdev->dev, "Could not allocate framebuffer.\n"); -+ goto err_malloc; -+ } -+ rpisense_fb->info = info; -+ -+ rpisense_fb_fix.smem_start = (unsigned long)rpisense_fb_param.vmem; -+ rpisense_fb_fix.smem_len = rpisense_fb_param.vmemsize; -+ -+ info->fbops = &rpisense_fb_ops; -+ info->fix = rpisense_fb_fix; -+ info->var = rpisense_fb_var; -+ info->fbdefio = &rpisense_fb_defio; -+ info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB; -+ info->screen_base = rpisense_fb_param.vmem; -+ info->screen_size = rpisense_fb_param.vmemsize; -+ -+ if (lowlight) -+ rpisense_fb_param.gamma = gamma_low; -+ -+ fb_deferred_io_init(info); -+ -+ ret = register_framebuffer(info); -+ if (ret < 0) { -+ dev_err(&pdev->dev, "Could not register framebuffer.\n"); -+ goto err_fballoc; -+ } -+ -+ fb_info(info, "%s frame buffer device\n", info->fix.id); -+ schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay); -+ return 0; -+err_fballoc: -+ framebuffer_release(info); -+err_malloc: -+ vfree(rpisense_fb_param.vmem); -+ return ret; -+} -+ -+static int rpisense_fb_remove(struct platform_device *pdev) -+{ -+ struct rpisense_fb *rpisense_fb = &rpisense->framebuffer; -+ struct fb_info *info = rpisense_fb->info; -+ -+ if (info) { -+ unregister_framebuffer(info); -+ fb_deferred_io_cleanup(info); -+ framebuffer_release(info); -+ vfree(rpisense_fb_param.vmem); -+ } -+ -+ return 0; -+} -+ -+#ifdef CONFIG_OF -+static const struct of_device_id rpisense_fb_id[] = { -+ { .compatible = "rpi,rpi-sense-fb" }, -+ { }, -+}; -+MODULE_DEVICE_TABLE(of, rpisense_fb_id); -+#endif -+ -+static struct platform_device_id rpisense_fb_device_id[] = { -+ { .name = "rpi-sense-fb" }, -+ { }, -+}; -+MODULE_DEVICE_TABLE(platform, rpisense_fb_device_id); -+ -+static struct platform_driver rpisense_fb_driver = { -+ .probe = rpisense_fb_probe, -+ .remove = rpisense_fb_remove, -+ .driver = { -+ .name = "rpi-sense-fb", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+module_platform_driver(rpisense_fb_driver); -+ -+MODULE_DESCRIPTION("Raspberry Pi Sense HAT framebuffer driver"); -+MODULE_AUTHOR("Serge Schneider "); -+MODULE_LICENSE("GPL"); -+ ---- /dev/null -+++ b/include/linux/mfd/rpisense/core.h -@@ -0,0 +1,47 @@ -+/* -+ * Raspberry Pi Sense HAT core driver -+ * http://raspberrypi.org -+ * -+ * Copyright (C) 2015 Raspberry Pi -+ * -+ * Author: Serge Schneider -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ */ -+ -+#ifndef __LINUX_MFD_RPISENSE_CORE_H_ -+#define __LINUX_MFD_RPISENSE_CORE_H_ -+ -+#include -+#include -+ -+/* -+ * Register values. -+ */ -+#define RPISENSE_FB 0x00 -+#define RPISENSE_WAI 0xF0 -+#define RPISENSE_VER 0xF1 -+#define RPISENSE_KEYS 0xF2 -+#define RPISENSE_EE_WP 0xF3 -+ -+#define RPISENSE_ID 's' -+ -+struct rpisense { -+ struct device *dev; -+ struct i2c_client *i2c_client; -+ -+ /* Client devices */ -+ struct rpisense_js joystick; -+ struct rpisense_fb framebuffer; -+}; -+ -+struct rpisense *rpisense_get_dev(void); -+s32 rpisense_reg_read(struct rpisense *rpisense, int reg); -+int rpisense_reg_write(struct rpisense *rpisense, int reg, u16 val); -+int rpisense_block_write(struct rpisense *rpisense, const char *buf, int count); -+ -+#endif ---- /dev/null -+++ b/include/linux/mfd/rpisense/framebuffer.h -@@ -0,0 +1,32 @@ -+/* -+ * Raspberry Pi Sense HAT framebuffer driver -+ * http://raspberrypi.org -+ * -+ * Copyright (C) 2015 Raspberry Pi -+ * -+ * Author: Serge Schneider -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ */ -+ -+#ifndef __LINUX_RPISENSE_FB_H_ -+#define __LINUX_RPISENSE_FB_H_ -+ -+#define SENSEFB_FBIO_IOC_MAGIC 0xF1 -+ -+#define SENSEFB_FBIOGET_GAMMA _IO(SENSEFB_FBIO_IOC_MAGIC, 0) -+#define SENSEFB_FBIOSET_GAMMA _IO(SENSEFB_FBIO_IOC_MAGIC, 1) -+#define SENSEFB_FBIORESET_GAMMA _IO(SENSEFB_FBIO_IOC_MAGIC, 2) -+ -+struct rpisense; -+ -+struct rpisense_fb { -+ struct platform_device *pdev; -+ struct fb_info *info; -+}; -+ -+#endif ---- /dev/null -+++ b/include/linux/mfd/rpisense/joystick.h -@@ -0,0 +1,35 @@ -+/* -+ * Raspberry Pi Sense HAT joystick driver -+ * http://raspberrypi.org -+ * -+ * Copyright (C) 2015 Raspberry Pi -+ * -+ * Author: Serge Schneider -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ */ -+ -+#ifndef __LINUX_RPISENSE_JOYSTICK_H_ -+#define __LINUX_RPISENSE_JOYSTICK_H_ -+ -+#include -+#include -+#include -+#include -+ -+struct rpisense; -+ -+struct rpisense_js { -+ struct platform_device *pdev; -+ struct input_dev *keys_dev; -+ struct gpio_desc *keys_desc; -+ struct work_struct keys_work_s; -+ int keys_irq; -+}; -+ -+ -+#endif diff --git a/target/linux/brcm2708/patches-4.9/0066-ASoC-Add-support-for-HifiBerry-DAC.patch b/target/linux/brcm2708/patches-4.9/0066-ASoC-Add-support-for-HifiBerry-DAC.patch deleted file mode 100644 index 107ed28c1b06..000000000000 --- a/target/linux/brcm2708/patches-4.9/0066-ASoC-Add-support-for-HifiBerry-DAC.patch +++ /dev/null @@ -1,170 +0,0 @@ -From fe9fdf49ba81e28860e5367ea8bb9c6b1c6a0460 Mon Sep 17 00:00:00 2001 -From: Florian Meier -Date: Fri, 22 Nov 2013 19:19:08 +0100 -Subject: [PATCH] ASoC: Add support for HifiBerry DAC - -This adds a machine driver for the HifiBerry DAC. -It is a sound card that can -be stacked onto the Raspberry Pi. - -Signed-off-by: Florian Meier ---- - sound/soc/bcm/Kconfig | 9 ++- - sound/soc/bcm/Makefile | 4 ++ - sound/soc/bcm/hifiberry_dac.c | 124 ++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 136 insertions(+), 1 deletion(-) - create mode 100644 sound/soc/bcm/hifiberry_dac.c - ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -15,4 +15,11 @@ config SND_SOC_CYGNUS - Say Y if you want to add support for ASoC audio on Broadcom - Cygnus chips (bcm958300, bcm958305, bcm911360) - -- If you don't know what to do here, say N. -\ No newline at end of file -+ If you don't know what to do here, say N. -+ -+config SND_BCM2708_SOC_HIFIBERRY_DAC -+ tristate "Support for HifiBerry DAC" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_PCM5102A -+ help -+ Say Y or M if you want to add support for HifiBerry DAC. ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -8,3 +8,7 @@ snd-soc-cygnus-objs := cygnus-pcm.o cygn - - obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o - -+# BCM2708 Machine Support -+snd-soc-hifiberry-dac-objs := hifiberry_dac.o -+ -+obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o ---- /dev/null -+++ b/sound/soc/bcm/hifiberry_dac.c -@@ -0,0 +1,124 @@ -+/* -+ * ASoC Driver for HifiBerry DAC -+ * -+ * Author: Florian Meier -+ * Copyright 2013 -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+static int snd_rpi_hifiberry_dac_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ return 0; -+} -+ -+static int snd_rpi_hifiberry_dac_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ -+ unsigned int sample_bits = -+ snd_pcm_format_physical_width(params_format(params)); -+ -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); -+} -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_rpi_hifiberry_dac_ops = { -+ .hw_params = snd_rpi_hifiberry_dac_hw_params, -+}; -+ -+static struct snd_soc_dai_link snd_rpi_hifiberry_dac_dai[] = { -+{ -+ .name = "HifiBerry DAC", -+ .stream_name = "HifiBerry DAC HiFi", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "pcm5102a-hifi", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "pcm5102a-codec", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBS_CFS, -+ .ops = &snd_rpi_hifiberry_dac_ops, -+ .init = snd_rpi_hifiberry_dac_init, -+}, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_rpi_hifiberry_dac = { -+ .name = "snd_rpi_hifiberry_dac", -+ .driver_name = "HifiberryDac", -+ .owner = THIS_MODULE, -+ .dai_link = snd_rpi_hifiberry_dac_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_dac_dai), -+}; -+ -+static int snd_rpi_hifiberry_dac_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ -+ snd_rpi_hifiberry_dac.dev = &pdev->dev; -+ -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai = &snd_rpi_hifiberry_dac_dai[0]; -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } -+ } -+ -+ ret = snd_soc_register_card(&snd_rpi_hifiberry_dac); -+ if (ret) -+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); -+ -+ return ret; -+} -+ -+static int snd_rpi_hifiberry_dac_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&snd_rpi_hifiberry_dac); -+} -+ -+static const struct of_device_id snd_rpi_hifiberry_dac_of_match[] = { -+ { .compatible = "hifiberry,hifiberry-dac", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_dac_of_match); -+ -+static struct platform_driver snd_rpi_hifiberry_dac_driver = { -+ .driver = { -+ .name = "snd-hifiberry-dac", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_rpi_hifiberry_dac_of_match, -+ }, -+ .probe = snd_rpi_hifiberry_dac_probe, -+ .remove = snd_rpi_hifiberry_dac_remove, -+}; -+ -+module_platform_driver(snd_rpi_hifiberry_dac_driver); -+ -+MODULE_AUTHOR("Florian Meier "); -+MODULE_DESCRIPTION("ASoC Driver for HifiBerry DAC"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/0067-ASoC-Add-support-for-Rpi-DAC.patch b/target/linux/brcm2708/patches-4.9/0067-ASoC-Add-support-for-Rpi-DAC.patch deleted file mode 100644 index 26ae5b3d769d..000000000000 --- a/target/linux/brcm2708/patches-4.9/0067-ASoC-Add-support-for-Rpi-DAC.patch +++ /dev/null @@ -1,272 +0,0 @@ -From 3a890b43d08fbfe10895f733578f095a6449ba0b Mon Sep 17 00:00:00 2001 -From: Florian Meier -Date: Mon, 25 Jan 2016 15:48:59 +0000 -Subject: [PATCH] ASoC: Add support for Rpi-DAC - ---- - sound/soc/bcm/Kconfig | 7 +++ - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/rpi-dac.c | 119 ++++++++++++++++++++++++++++++++++++++++++++ - sound/soc/codecs/Kconfig | 5 ++ - sound/soc/codecs/Makefile | 2 + - sound/soc/codecs/pcm1794a.c | 69 +++++++++++++++++++++++++ - 6 files changed, 204 insertions(+) - create mode 100644 sound/soc/bcm/rpi-dac.c - create mode 100644 sound/soc/codecs/pcm1794a.c - ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -23,3 +23,10 @@ config SND_BCM2708_SOC_HIFIBERRY_DAC - select SND_SOC_PCM5102A - help - Say Y or M if you want to add support for HifiBerry DAC. -+ -+config SND_BCM2708_SOC_RPI_DAC -+ tristate "Support for RPi-DAC" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_PCM1794A -+ help -+ Say Y or M if you want to add support for RPi-DAC. ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -10,5 +10,7 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc- - - # BCM2708 Machine Support - snd-soc-hifiberry-dac-objs := hifiberry_dac.o -+snd-soc-rpi-dac-objs := rpi-dac.o - - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o -+obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o ---- /dev/null -+++ b/sound/soc/bcm/rpi-dac.c -@@ -0,0 +1,119 @@ -+/* -+ * ASoC Driver for RPi-DAC. -+ * -+ * Author: Florian Meier -+ * Copyright 2013 -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+static int snd_rpi_rpi_dac_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ return 0; -+} -+ -+static int snd_rpi_rpi_dac_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 32*2); -+} -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_rpi_rpi_dac_ops = { -+ .hw_params = snd_rpi_rpi_dac_hw_params, -+}; -+ -+static struct snd_soc_dai_link snd_rpi_rpi_dac_dai[] = { -+{ -+ .name = "RPi-DAC", -+ .stream_name = "RPi-DAC HiFi", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "pcm1794a-hifi", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "pcm1794a-codec", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBS_CFS, -+ .ops = &snd_rpi_rpi_dac_ops, -+ .init = snd_rpi_rpi_dac_init, -+}, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_rpi_rpi_dac = { -+ .name = "snd_rpi_rpi_dac", -+ .owner = THIS_MODULE, -+ .dai_link = snd_rpi_rpi_dac_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_rpi_dac_dai), -+}; -+ -+static int snd_rpi_rpi_dac_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ -+ snd_rpi_rpi_dac.dev = &pdev->dev; -+ -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai = &snd_rpi_rpi_dac_dai[0]; -+ i2s_node = of_parse_phandle(pdev->dev.of_node, "i2s-controller", 0); -+ -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } -+ } -+ -+ ret = snd_soc_register_card(&snd_rpi_rpi_dac); -+ if (ret) -+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); -+ -+ return ret; -+} -+ -+static int snd_rpi_rpi_dac_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&snd_rpi_rpi_dac); -+} -+ -+static const struct of_device_id snd_rpi_rpi_dac_of_match[] = { -+ { .compatible = "rpi,rpi-dac", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, snd_rpi_rpi_dac_of_match); -+ -+static struct platform_driver snd_rpi_rpi_dac_driver = { -+ .driver = { -+ .name = "snd-rpi-dac", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_rpi_rpi_dac_of_match, -+ }, -+ .probe = snd_rpi_rpi_dac_probe, -+ .remove = snd_rpi_rpi_dac_remove, -+}; -+ -+module_platform_driver(snd_rpi_rpi_dac_driver); -+ -+MODULE_AUTHOR("Florian Meier "); -+MODULE_DESCRIPTION("ASoC Driver for RPi-DAC"); -+MODULE_LICENSE("GPL v2"); ---- a/sound/soc/codecs/Kconfig -+++ b/sound/soc/codecs/Kconfig -@@ -98,6 +98,7 @@ config SND_SOC_ALL_CODECS - select SND_SOC_PCM1681 if I2C - select SND_SOC_PCM179X_I2C if I2C - select SND_SOC_PCM179X_SPI if SPI_MASTER -+ select SND_SOC_PCM1794A if I2C - select SND_SOC_PCM3008 - select SND_SOC_PCM3168A_I2C if I2C - select SND_SOC_PCM3168A_SPI if SPI_MASTER -@@ -689,6 +690,10 @@ config SND_SOC_RT5616 - tristate "Realtek RT5616 CODEC" - depends on I2C - -+config SND_SOC_PCM1794A -+ tristate -+ depends on I2C -+ - config SND_SOC_RT5631 - tristate "Realtek ALC5631/RT5631 CODEC" - depends on I2C ---- a/sound/soc/codecs/Makefile -+++ b/sound/soc/codecs/Makefile -@@ -93,6 +93,7 @@ snd-soc-pcm1681-objs := pcm1681.o - snd-soc-pcm179x-codec-objs := pcm179x.o - snd-soc-pcm179x-i2c-objs := pcm179x-i2c.o - snd-soc-pcm179x-spi-objs := pcm179x-spi.o -+snd-soc-pcm1794a-objs := pcm1794a.o - snd-soc-pcm3008-objs := pcm3008.o - snd-soc-pcm3168a-objs := pcm3168a.o - snd-soc-pcm3168a-i2c-objs := pcm3168a-i2c.o -@@ -325,6 +326,7 @@ obj-$(CONFIG_SND_SOC_PCM5102A) += snd-so - obj-$(CONFIG_SND_SOC_PCM512x) += snd-soc-pcm512x.o - obj-$(CONFIG_SND_SOC_PCM512x_I2C) += snd-soc-pcm512x-i2c.o - obj-$(CONFIG_SND_SOC_PCM512x_SPI) += snd-soc-pcm512x-spi.o -+obj-$(CONFIG_SND_SOC_PCM1794A) += snd-soc-pcm1794a.o - obj-$(CONFIG_SND_SOC_RL6231) += snd-soc-rl6231.o - obj-$(CONFIG_SND_SOC_RL6347A) += snd-soc-rl6347a.o - obj-$(CONFIG_SND_SOC_RT286) += snd-soc-rt286.o ---- /dev/null -+++ b/sound/soc/codecs/pcm1794a.c -@@ -0,0 +1,69 @@ -+/* -+ * Driver for the PCM1794A codec -+ * -+ * Author: Florian Meier -+ * Copyright 2013 -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+ -+#include -+#include -+#include -+ -+#include -+ -+static struct snd_soc_dai_driver pcm1794a_dai = { -+ .name = "pcm1794a-hifi", -+ .playback = { -+ .channels_min = 2, -+ .channels_max = 2, -+ .rates = SNDRV_PCM_RATE_8000_192000, -+ .formats = SNDRV_PCM_FMTBIT_S16_LE | -+ SNDRV_PCM_FMTBIT_S24_LE -+ }, -+}; -+ -+static struct snd_soc_codec_driver soc_codec_dev_pcm1794a; -+ -+static int pcm1794a_probe(struct platform_device *pdev) -+{ -+ return snd_soc_register_codec(&pdev->dev, &soc_codec_dev_pcm1794a, -+ &pcm1794a_dai, 1); -+} -+ -+static int pcm1794a_remove(struct platform_device *pdev) -+{ -+ snd_soc_unregister_codec(&pdev->dev); -+ return 0; -+} -+ -+static const struct of_device_id pcm1794a_of_match[] = { -+ { .compatible = "ti,pcm1794a", }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, pcm1794a_of_match); -+ -+static struct platform_driver pcm1794a_codec_driver = { -+ .probe = pcm1794a_probe, -+ .remove = pcm1794a_remove, -+ .driver = { -+ .name = "pcm1794a-codec", -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(pcm1794a_of_match), -+ }, -+}; -+ -+module_platform_driver(pcm1794a_codec_driver); -+ -+MODULE_DESCRIPTION("ASoC PCM1794A codec driver"); -+MODULE_AUTHOR("Florian Meier "); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/0068-ASoC-wm8804-Implement-MCLK-configuration-options-add.patch b/target/linux/brcm2708/patches-4.9/0068-ASoC-wm8804-Implement-MCLK-configuration-options-add.patch deleted file mode 100644 index 1be734befa1e..000000000000 --- a/target/linux/brcm2708/patches-4.9/0068-ASoC-wm8804-Implement-MCLK-configuration-options-add.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 8432dc7c8a843e7c35d7624adc6653e13dd488a7 Mon Sep 17 00:00:00 2001 -From: Daniel Matuschek -Date: Wed, 15 Jan 2014 21:41:23 +0100 -Subject: [PATCH] ASoC: wm8804: Implement MCLK configuration options, add 32bit - support WM8804 can run with PLL frequencies of 256xfs and 128xfs for most - sample rates. At 192kHz only 128xfs is supported. The existing driver selects - 128xfs automatically for some lower samples rates. By using an additional - mclk_div divider, it is now possible to control the behaviour. This allows - using 256xfs PLL frequency on all sample rates up to 96kHz. It should allow - lower jitter and better signal quality. The behavior has to be controlled by - the sound card driver, because some sample frequency share the same setting. - e.g. 192kHz and 96kHz use 24.576MHz master clock. The only difference is the - MCLK divider. - -This also added support for 32bit data. - -Signed-off-by: Daniel Matuschek ---- - sound/soc/codecs/wm8804.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/sound/soc/codecs/wm8804.c -+++ b/sound/soc/codecs/wm8804.c -@@ -304,6 +304,7 @@ static int wm8804_hw_params(struct snd_p - blen = 0x1; - break; - case 24: -+ case 32: - blen = 0x2; - break; - default: -@@ -515,7 +516,7 @@ static const struct snd_soc_dai_ops wm88 - }; - - #define WM8804_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ -- SNDRV_PCM_FMTBIT_S24_LE) -+ SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) - - #define WM8804_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ - SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \ -@@ -543,7 +544,7 @@ static struct snd_soc_dai_driver wm8804_ - }; - - static const struct snd_soc_codec_driver soc_codec_dev_wm8804 = { -- .idle_bias_off = true, -+ .idle_bias_off = false, - - .component_driver = { - .dapm_widgets = wm8804_dapm_widgets, diff --git a/target/linux/brcm2708/patches-4.9/0069-ASoC-BCM-Add-support-for-HiFiBerry-Digi.-Driver-is-b.patch b/target/linux/brcm2708/patches-4.9/0069-ASoC-BCM-Add-support-for-HiFiBerry-Digi.-Driver-is-b.patch deleted file mode 100644 index 5f8477cd7bc9..000000000000 --- a/target/linux/brcm2708/patches-4.9/0069-ASoC-BCM-Add-support-for-HiFiBerry-Digi.-Driver-is-b.patch +++ /dev/null @@ -1,339 +0,0 @@ -From ded3c4c0c46af840159e4fc79a065d69cbb7b534 Mon Sep 17 00:00:00 2001 -From: Daniel Matuschek -Date: Wed, 15 Jan 2014 21:42:08 +0100 -Subject: [PATCH] ASoC: BCM:Add support for HiFiBerry Digi. Driver is based on - the patched WM8804 driver. - -Signed-off-by: Daniel Matuschek - -Add a parameter to turn off SPDIF output if no audio is playing - -This patch adds the paramater auto_shutdown_output to the kernel module. -Default behaviour of the module is the same, but when auto_shutdown_output -is set to 1, the SPDIF oputput will shutdown if no stream is playing. - -bugfix for 32kHz sample rate, was missing - -HiFiBerry Digi: set SPDIF status bits for sample rate - -The HiFiBerry Digi driver did not signal the sample rate in the SPDIF status bits. -While this is optional, some DACs and receivers do not accept this signal. This patch -adds the sample rate bits in the SPDIF status block. - -Added HiFiBerry Digi+ Pro driver - -Signed-off-by: Daniel Matuschek ---- - sound/soc/bcm/Kconfig | 7 ++ - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/hifiberry_digi.c | 276 +++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 285 insertions(+) - create mode 100644 sound/soc/bcm/hifiberry_digi.c - ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -24,6 +24,13 @@ config SND_BCM2708_SOC_HIFIBERRY_DAC - help - Say Y or M if you want to add support for HifiBerry DAC. - -+config SND_BCM2708_SOC_HIFIBERRY_DIGI -+ tristate "Support for HifiBerry Digi" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_WM8804 -+ help -+ Say Y or M if you want to add support for HifiBerry Digi S/PDIF output board. -+ - config SND_BCM2708_SOC_RPI_DAC - tristate "Support for RPi-DAC" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -10,7 +10,9 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc- - - # BCM2708 Machine Support - snd-soc-hifiberry-dac-objs := hifiberry_dac.o -+snd-soc-hifiberry-digi-objs := hifiberry_digi.o - snd-soc-rpi-dac-objs := rpi-dac.o - - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o -+obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o ---- /dev/null -+++ b/sound/soc/bcm/hifiberry_digi.c -@@ -0,0 +1,276 @@ -+/* -+ * ASoC Driver for HifiBerry Digi -+ * -+ * Author: Daniel Matuschek -+ * based on the HifiBerry DAC driver by Florian Meier -+ * Copyright 2013 -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "../codecs/wm8804.h" -+ -+static short int auto_shutdown_output = 0; -+module_param(auto_shutdown_output, short, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP); -+MODULE_PARM_DESC(auto_shutdown_output, "Shutdown SP/DIF output if playback is stopped"); -+ -+#define CLK_44EN_RATE 22579200UL -+#define CLK_48EN_RATE 24576000UL -+ -+static bool snd_rpi_hifiberry_is_digipro; -+static struct gpio_desc *snd_rpi_hifiberry_clk44gpio; -+static struct gpio_desc *snd_rpi_hifiberry_clk48gpio; -+ -+static int samplerate=44100; -+ -+static uint32_t snd_rpi_hifiberry_digi_enable_clock(int sample_rate) -+{ -+ switch (sample_rate) { -+ case 11025: -+ case 22050: -+ case 44100: -+ case 88200: -+ case 176400: -+ gpiod_set_value_cansleep(snd_rpi_hifiberry_clk44gpio, 1); -+ gpiod_set_value_cansleep(snd_rpi_hifiberry_clk48gpio, 0); -+ return CLK_44EN_RATE; -+ default: -+ gpiod_set_value_cansleep(snd_rpi_hifiberry_clk48gpio, 1); -+ gpiod_set_value_cansleep(snd_rpi_hifiberry_clk44gpio, 0); -+ return CLK_48EN_RATE; -+ } -+} -+ -+ -+static int snd_rpi_hifiberry_digi_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ struct snd_soc_codec *codec = rtd->codec; -+ -+ /* enable TX output */ -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); -+ -+ /* Initialize Digi+ Pro hardware */ -+ if (snd_rpi_hifiberry_is_digipro) { -+ struct snd_soc_dai_link *dai = rtd->dai_link; -+ -+ dai->name = "HiFiBerry Digi+ Pro"; -+ dai->stream_name = "HiFiBerry Digi+ Pro HiFi"; -+ } -+ -+ return 0; -+} -+ -+static int snd_rpi_hifiberry_digi_startup(struct snd_pcm_substream *substream) { -+ /* turn on digital output */ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_codec *codec = rtd->codec; -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x00); -+ return 0; -+} -+ -+static void snd_rpi_hifiberry_digi_shutdown(struct snd_pcm_substream *substream) { -+ /* turn off output */ -+ if (auto_shutdown_output) { -+ /* turn off output */ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_codec *codec = rtd->codec; -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x3c); -+ } -+} -+ -+ -+static int snd_rpi_hifiberry_digi_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *codec_dai = rtd->codec_dai; -+ struct snd_soc_codec *codec = rtd->codec; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ -+ int sysclk = 27000000; /* This is fixed on this board */ -+ -+ long mclk_freq=0; -+ int mclk_div=1; -+ int sampling_freq=1; -+ -+ int ret; -+ -+ samplerate = params_rate(params); -+ -+ if (samplerate<=96000) { -+ mclk_freq=samplerate*256; -+ mclk_div=WM8804_MCLKDIV_256FS; -+ } else { -+ mclk_freq=samplerate*128; -+ mclk_div=WM8804_MCLKDIV_128FS; -+ } -+ -+ if (snd_rpi_hifiberry_is_digipro) -+ sysclk = snd_rpi_hifiberry_digi_enable_clock(samplerate); -+ -+ switch (samplerate) { -+ case 32000: -+ sampling_freq=0x03; -+ break; -+ case 44100: -+ sampling_freq=0x00; -+ break; -+ case 48000: -+ sampling_freq=0x02; -+ break; -+ case 88200: -+ sampling_freq=0x08; -+ break; -+ case 96000: -+ sampling_freq=0x0a; -+ break; -+ case 176400: -+ sampling_freq=0x0c; -+ break; -+ case 192000: -+ sampling_freq=0x0e; -+ break; -+ default: -+ dev_err(codec->dev, -+ "Failed to set WM8804 SYSCLK, unsupported samplerate %d\n", -+ samplerate); -+ } -+ -+ snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div); -+ snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq); -+ -+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL, -+ sysclk, SND_SOC_CLOCK_OUT); -+ -+ if (ret < 0) { -+ dev_err(codec->dev, -+ "Failed to set WM8804 SYSCLK: %d\n", ret); -+ return ret; -+ } -+ -+ /* Enable TX output */ -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); -+ -+ /* Power on */ -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x9, 0); -+ -+ /* set sampling frequency status bits */ -+ snd_soc_update_bits(codec, WM8804_SPDTX4, 0x0f, sampling_freq); -+ -+ return snd_soc_dai_set_bclk_ratio(cpu_dai,64); -+} -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_rpi_hifiberry_digi_ops = { -+ .hw_params = snd_rpi_hifiberry_digi_hw_params, -+ .startup = snd_rpi_hifiberry_digi_startup, -+ .shutdown = snd_rpi_hifiberry_digi_shutdown, -+}; -+ -+static struct snd_soc_dai_link snd_rpi_hifiberry_digi_dai[] = { -+{ -+ .name = "HifiBerry Digi", -+ .stream_name = "HifiBerry Digi HiFi", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "wm8804-spdif", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "wm8804.1-003b", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBM_CFM, -+ .ops = &snd_rpi_hifiberry_digi_ops, -+ .init = snd_rpi_hifiberry_digi_init, -+}, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_rpi_hifiberry_digi = { -+ .name = "snd_rpi_hifiberry_digi", -+ .driver_name = "HifiberryDigi", -+ .owner = THIS_MODULE, -+ .dai_link = snd_rpi_hifiberry_digi_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_digi_dai), -+}; -+ -+static int snd_rpi_hifiberry_digi_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ -+ snd_rpi_hifiberry_digi.dev = &pdev->dev; -+ -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai = &snd_rpi_hifiberry_digi_dai[0]; -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } -+ -+ snd_rpi_hifiberry_is_digipro = 1; -+ -+ snd_rpi_hifiberry_clk44gpio = -+ devm_gpiod_get(&pdev->dev, "clock44", GPIOD_OUT_LOW); -+ if (IS_ERR(snd_rpi_hifiberry_clk44gpio)) -+ snd_rpi_hifiberry_is_digipro = 0; -+ -+ snd_rpi_hifiberry_clk48gpio = -+ devm_gpiod_get(&pdev->dev, "clock48", GPIOD_OUT_LOW); -+ if (IS_ERR(snd_rpi_hifiberry_clk48gpio)) -+ snd_rpi_hifiberry_is_digipro = 0; -+ -+ } -+ -+ ret = snd_soc_register_card(&snd_rpi_hifiberry_digi); -+ if (ret) -+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); -+ -+ return ret; -+} -+ -+static int snd_rpi_hifiberry_digi_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&snd_rpi_hifiberry_digi); -+} -+ -+static const struct of_device_id snd_rpi_hifiberry_digi_of_match[] = { -+ { .compatible = "hifiberry,hifiberry-digi", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_digi_of_match); -+ -+static struct platform_driver snd_rpi_hifiberry_digi_driver = { -+ .driver = { -+ .name = "snd-hifiberry-digi", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_rpi_hifiberry_digi_of_match, -+ }, -+ .probe = snd_rpi_hifiberry_digi_probe, -+ .remove = snd_rpi_hifiberry_digi_remove, -+}; -+ -+module_platform_driver(snd_rpi_hifiberry_digi_driver); -+ -+MODULE_AUTHOR("Daniel Matuschek "); -+MODULE_DESCRIPTION("ASoC Driver for HifiBerry Digi"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/0070-Add-IQaudIO-Sound-Card-support-for-Raspberry-Pi.patch b/target/linux/brcm2708/patches-4.9/0070-Add-IQaudIO-Sound-Card-support-for-Raspberry-Pi.patch deleted file mode 100644 index 08bf856c9f42..000000000000 --- a/target/linux/brcm2708/patches-4.9/0070-Add-IQaudIO-Sound-Card-support-for-Raspberry-Pi.patch +++ /dev/null @@ -1,325 +0,0 @@ -From fcfe9087b79176b5d8afd0ecc4c66013866ef239 Mon Sep 17 00:00:00 2001 -From: Gordon Garrity -Date: Sat, 8 Mar 2014 16:56:57 +0000 -Subject: [PATCH] Add IQaudIO Sound Card support for Raspberry Pi - -Set a limit of 0dB on Digital Volume Control - -The main volume control in the PCM512x DAC has a range up to -+24dB. This is dangerously loud and can potentially cause massive -clipping in the output stages. Therefore this sets a sensible -limit of 0dB for this control. - -Allow up to 24dB digital gain to be applied when using IQAudIO DAC+ - -24db_digital_gain DT param can be used to specify that PCM512x -codec "Digital" volume control should not be limited to 0dB gain, -and if specified will allow the full 24dB gain. - -Modify IQAudIO DAC+ ASoC driver to set card/dai config from dt - -Add the ability to set the card name, dai name and dai stream name, from -dt config. - -Signed-off-by: DigitalDreamtime - -IQaudIO: auto-mute for AMP+ and DigiAMP+ - -IQAudIO amplifier mute via GPIO22. Add dt params for "one-shot" unmute -and auto mute. - -Revision 2, auto mute implementing HiassofT suggestion to mute/unmute -using set_bias_level, rather than startup/shutdown.... -"By default DAPM waits 5 seconds (pmdown_time) before shutting down -playback streams so a close/stop immediately followed by open/start -doesn't trigger an amp mute+unmute." - -Tested on both AMP+ (via DAC+) and DigiAMP+, with both options... - -dtoverlay=iqaudio-dacplus,unmute_amp - "one-shot" unmute when kernel module loads. - -dtoverlay=iqaudio-dacplus,auto_mute_amp - Unmute amp when ALSA device opened by a client. Mute, with 5 second delay - when ALSA device closed. (Re-opening the device within the 5 second close - window, will cancel mute.) - -Revision 4, using gpiod. - -Revision 5, clean-up formatting before adding mute code. - - Convert tab plus 4 space formatting to 2x tab - - Remove '// NOT USED' commented code - -Revision 6, don't attempt to "one-shot" unmute amp, unless card is -successfully registered. - -Signed-off-by: DigitalDreamtime ---- - sound/soc/bcm/Kconfig | 7 ++ - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/iqaudio-dac.c | 234 ++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 243 insertions(+) - create mode 100644 sound/soc/bcm/iqaudio-dac.c - ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -37,3 +37,10 @@ config SND_BCM2708_SOC_RPI_DAC - select SND_SOC_PCM1794A - help - Say Y or M if you want to add support for RPi-DAC. -+ -+config SND_BCM2708_SOC_IQAUDIO_DAC -+ tristate "Support for IQaudIO-DAC" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_PCM512x_I2C -+ help -+ Say Y or M if you want to add support for IQaudIO-DAC. ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -12,7 +12,9 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc- - snd-soc-hifiberry-dac-objs := hifiberry_dac.o - snd-soc-hifiberry-digi-objs := hifiberry_digi.o - snd-soc-rpi-dac-objs := rpi-dac.o -+snd-soc-iqaudio-dac-objs := iqaudio-dac.o - - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o -+obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o ---- /dev/null -+++ b/sound/soc/bcm/iqaudio-dac.c -@@ -0,0 +1,234 @@ -+/* -+ * ASoC Driver for IQaudIO DAC -+ * -+ * Author: Florian Meier -+ * Copyright 2013 -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+static bool digital_gain_0db_limit = true; -+ -+static struct gpio_desc *mute_gpio; -+ -+static int snd_rpi_iqaudio_dac_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ if (digital_gain_0db_limit) -+ { -+ int ret; -+ struct snd_soc_card *card = rtd->card; -+ -+ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); -+ if (ret < 0) -+ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); -+ } -+ -+ return 0; -+} -+ -+static int snd_rpi_iqaudio_dac_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ -+ unsigned int sample_bits = -+ snd_pcm_format_physical_width(params_format(params)); -+ -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); -+} -+ -+static void snd_rpi_iqaudio_gpio_mute(struct snd_soc_card *card) -+{ -+ if (mute_gpio) { -+ dev_info(card->dev, "%s: muting amp using GPIO22\n", -+ __func__); -+ gpiod_set_value_cansleep(mute_gpio, 0); -+ } -+} -+ -+static void snd_rpi_iqaudio_gpio_unmute(struct snd_soc_card *card) -+{ -+ if (mute_gpio) { -+ dev_info(card->dev, "%s: un-muting amp using GPIO22\n", -+ __func__); -+ gpiod_set_value_cansleep(mute_gpio, 1); -+ } -+} -+ -+static int snd_rpi_iqaudio_set_bias_level(struct snd_soc_card *card, -+ struct snd_soc_dapm_context *dapm, enum snd_soc_bias_level level) -+{ -+ struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai; -+ -+ if (dapm->dev != codec_dai->dev) -+ return 0; -+ -+ switch (level) { -+ case SND_SOC_BIAS_PREPARE: -+ if (dapm->bias_level != SND_SOC_BIAS_STANDBY) -+ break; -+ -+ /* UNMUTE AMP */ -+ snd_rpi_iqaudio_gpio_unmute(card); -+ -+ break; -+ case SND_SOC_BIAS_STANDBY: -+ if (dapm->bias_level != SND_SOC_BIAS_PREPARE) -+ break; -+ -+ /* MUTE AMP */ -+ snd_rpi_iqaudio_gpio_mute(card); -+ -+ break; -+ default: -+ break; -+ } -+ -+ return 0; -+} -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_rpi_iqaudio_dac_ops = { -+ .hw_params = snd_rpi_iqaudio_dac_hw_params, -+}; -+ -+static struct snd_soc_dai_link snd_rpi_iqaudio_dac_dai[] = { -+{ -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "pcm512x-hifi", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "pcm512x.1-004c", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBS_CFS, -+ .ops = &snd_rpi_iqaudio_dac_ops, -+ .init = snd_rpi_iqaudio_dac_init, -+}, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_rpi_iqaudio_dac = { -+ .owner = THIS_MODULE, -+ .dai_link = snd_rpi_iqaudio_dac_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_iqaudio_dac_dai), -+}; -+ -+static int snd_rpi_iqaudio_dac_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ bool gpio_unmute = false; -+ -+ snd_rpi_iqaudio_dac.dev = &pdev->dev; -+ -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_card *card = &snd_rpi_iqaudio_dac; -+ struct snd_soc_dai_link *dai = &snd_rpi_iqaudio_dac_dai[0]; -+ bool auto_gpio_mute = false; -+ -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } -+ -+ digital_gain_0db_limit = !of_property_read_bool( -+ pdev->dev.of_node, "iqaudio,24db_digital_gain"); -+ -+ if (of_property_read_string(pdev->dev.of_node, "card_name", -+ &card->name)) -+ card->name = "IQaudIODAC"; -+ -+ if (of_property_read_string(pdev->dev.of_node, "dai_name", -+ &dai->name)) -+ dai->name = "IQaudIO DAC"; -+ -+ if (of_property_read_string(pdev->dev.of_node, -+ "dai_stream_name", &dai->stream_name)) -+ dai->stream_name = "IQaudIO DAC HiFi"; -+ -+ /* gpio_unmute - one time unmute amp using GPIO */ -+ gpio_unmute = of_property_read_bool(pdev->dev.of_node, -+ "iqaudio-dac,unmute-amp"); -+ -+ /* auto_gpio_mute - mute/unmute amp using GPIO */ -+ auto_gpio_mute = of_property_read_bool(pdev->dev.of_node, -+ "iqaudio-dac,auto-mute-amp"); -+ -+ if (auto_gpio_mute || gpio_unmute) { -+ mute_gpio = devm_gpiod_get_optional(&pdev->dev, "mute", -+ GPIOD_OUT_LOW); -+ if (IS_ERR(mute_gpio)) { -+ ret = PTR_ERR(mute_gpio); -+ dev_err(&pdev->dev, -+ "Failed to get mute gpio: %d\n", ret); -+ return ret; -+ } -+ -+ if (auto_gpio_mute && mute_gpio) -+ snd_rpi_iqaudio_dac.set_bias_level = -+ snd_rpi_iqaudio_set_bias_level; -+ } -+ } -+ -+ ret = snd_soc_register_card(&snd_rpi_iqaudio_dac); -+ if (ret) { -+ dev_err(&pdev->dev, -+ "snd_soc_register_card() failed: %d\n", ret); -+ return ret; -+ } -+ -+ if (gpio_unmute && mute_gpio) -+ snd_rpi_iqaudio_gpio_unmute(&snd_rpi_iqaudio_dac); -+ -+ return 0; -+} -+ -+static int snd_rpi_iqaudio_dac_remove(struct platform_device *pdev) -+{ -+ snd_rpi_iqaudio_gpio_mute(&snd_rpi_iqaudio_dac); -+ -+ return snd_soc_unregister_card(&snd_rpi_iqaudio_dac); -+} -+ -+static const struct of_device_id iqaudio_of_match[] = { -+ { .compatible = "iqaudio,iqaudio-dac", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, iqaudio_of_match); -+ -+static struct platform_driver snd_rpi_iqaudio_dac_driver = { -+ .driver = { -+ .name = "snd-rpi-iqaudio-dac", -+ .owner = THIS_MODULE, -+ .of_match_table = iqaudio_of_match, -+ }, -+ .probe = snd_rpi_iqaudio_dac_probe, -+ .remove = snd_rpi_iqaudio_dac_remove, -+}; -+ -+module_platform_driver(snd_rpi_iqaudio_dac_driver); -+ -+MODULE_AUTHOR("Florian Meier "); -+MODULE_DESCRIPTION("ASoC Driver for IQAudio DAC"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/0071-iqaudio-dac-Compile-fix-untested.patch b/target/linux/brcm2708/patches-4.9/0071-iqaudio-dac-Compile-fix-untested.patch deleted file mode 100644 index edfb9f5e1fd5..000000000000 --- a/target/linux/brcm2708/patches-4.9/0071-iqaudio-dac-Compile-fix-untested.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 711f7413d72af6328a3958eecd400bd8911af211 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Mon, 25 Jul 2016 17:06:50 +0100 -Subject: [PATCH] iqaudio-dac: Compile fix - untested - ---- - sound/soc/bcm/iqaudio-dac.c | 6 +++++- - 1 file changed, 5 insertions(+), 1 deletion(-) - ---- a/sound/soc/bcm/iqaudio-dac.c -+++ b/sound/soc/bcm/iqaudio-dac.c -@@ -76,7 +76,11 @@ static void snd_rpi_iqaudio_gpio_unmute( - static int snd_rpi_iqaudio_set_bias_level(struct snd_soc_card *card, - struct snd_soc_dapm_context *dapm, enum snd_soc_bias_level level) - { -- struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai; -+ struct snd_soc_pcm_runtime *rtd; -+ struct snd_soc_dai *codec_dai; -+ -+ rtd = snd_soc_get_pcm_runtime(card, card->dai_link[0].name); -+ codec_dai = rtd->codec_dai; - - if (dapm->dev != codec_dai->dev) - return 0; diff --git a/target/linux/brcm2708/patches-4.9/0072-Added-support-for-HiFiBerry-DAC.patch b/target/linux/brcm2708/patches-4.9/0072-Added-support-for-HiFiBerry-DAC.patch deleted file mode 100644 index 21d30af475a8..000000000000 --- a/target/linux/brcm2708/patches-4.9/0072-Added-support-for-HiFiBerry-DAC.patch +++ /dev/null @@ -1,618 +0,0 @@ -From 9c6b8bd0db7564a2124290e3bc30215906371fa9 Mon Sep 17 00:00:00 2001 -From: Daniel Matuschek -Date: Mon, 4 Aug 2014 10:06:56 +0200 -Subject: [PATCH] Added support for HiFiBerry DAC+ - -The driver is based on the HiFiBerry DAC driver. However HiFiBerry DAC+ uses -a different codec chip (PCM5122), therefore a new driver is necessary. - -Add support for the HiFiBerry DAC+ Pro. - -The HiFiBerry DAC+ and DAC+ Pro products both use the existing bcm sound driver with the DAC+ Pro having a special clock device driver representing the two high precision oscillators. - -An addition bug fix is included for the PCM512x codec where by the physical size of the sample frame is used in the calculation of the LRCK divisor as it was found to be wrong when using 24-bit depth sample contained in a little endian 4-byte sample frame. - -Limit PCM512x "Digital" gain to 0dB by default with HiFiBerry DAC+ - -24db_digital_gain DT param can be used to specify that PCM512x -codec "Digital" volume control should not be limited to 0dB gain, -and if specified will allow the full 24dB gain. - -Add dt param to force HiFiBerry DAC+ Pro into slave mode - -"dtoverlay=hifiberry-dacplus,slave" - -Add 'slave' param to use HiFiBerry DAC+ Pro in slave mode, -with Pi as master for bit and frame clock. - -Signed-off-by: DigitalDreamtime ---- - drivers/clk/Makefile | 1 + - drivers/clk/clk-hifiberry-dacpro.c | 160 +++++++++++++++++ - sound/soc/bcm/Kconfig | 7 + - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/hifiberry_dacplus.c | 359 +++++++++++++++++++++++++++++++++++++ - sound/soc/codecs/pcm512x.c | 3 +- - 6 files changed, 531 insertions(+), 1 deletion(-) - create mode 100644 drivers/clk/clk-hifiberry-dacpro.c - create mode 100644 sound/soc/bcm/hifiberry_dacplus.c - ---- a/drivers/clk/Makefile -+++ b/drivers/clk/Makefile -@@ -26,6 +26,7 @@ obj-$(CONFIG_ARCH_CLPS711X) += clk-clps - obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o - obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o - obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o -+obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += clk-hifiberry-dacpro.o - obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o - obj-$(CONFIG_ARCH_MB86S7X) += clk-mb86s7x.o - obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o ---- /dev/null -+++ b/drivers/clk/clk-hifiberry-dacpro.c -@@ -0,0 +1,160 @@ -+/* -+ * Clock Driver for HiFiBerry DAC Pro -+ * -+ * Author: Stuart MacLean -+ * Copyright 2015 -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* Clock rate of CLK44EN attached to GPIO6 pin */ -+#define CLK_44EN_RATE 22579200UL -+/* Clock rate of CLK48EN attached to GPIO3 pin */ -+#define CLK_48EN_RATE 24576000UL -+ -+/** -+ * struct hifiberry_dacpro_clk - Common struct to the HiFiBerry DAC Pro -+ * @hw: clk_hw for the common clk framework -+ * @mode: 0 => CLK44EN, 1 => CLK48EN -+ */ -+struct clk_hifiberry_hw { -+ struct clk_hw hw; -+ uint8_t mode; -+}; -+ -+#define to_hifiberry_clk(_hw) container_of(_hw, struct clk_hifiberry_hw, hw) -+ -+static const struct of_device_id clk_hifiberry_dacpro_dt_ids[] = { -+ { .compatible = "hifiberry,dacpro-clk",}, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, clk_hifiberry_dacpro_dt_ids); -+ -+static unsigned long clk_hifiberry_dacpro_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ return (to_hifiberry_clk(hw)->mode == 0) ? CLK_44EN_RATE : -+ CLK_48EN_RATE; -+} -+ -+static long clk_hifiberry_dacpro_round_rate(struct clk_hw *hw, -+ unsigned long rate, unsigned long *parent_rate) -+{ -+ long actual_rate; -+ -+ if (rate <= CLK_44EN_RATE) { -+ actual_rate = (long)CLK_44EN_RATE; -+ } else if (rate >= CLK_48EN_RATE) { -+ actual_rate = (long)CLK_48EN_RATE; -+ } else { -+ long diff44Rate = (long)(rate - CLK_44EN_RATE); -+ long diff48Rate = (long)(CLK_48EN_RATE - rate); -+ -+ if (diff44Rate < diff48Rate) -+ actual_rate = (long)CLK_44EN_RATE; -+ else -+ actual_rate = (long)CLK_48EN_RATE; -+ } -+ return actual_rate; -+} -+ -+ -+static int clk_hifiberry_dacpro_set_rate(struct clk_hw *hw, -+ unsigned long rate, unsigned long parent_rate) -+{ -+ unsigned long actual_rate; -+ struct clk_hifiberry_hw *clk = to_hifiberry_clk(hw); -+ -+ actual_rate = (unsigned long)clk_hifiberry_dacpro_round_rate(hw, rate, -+ &parent_rate); -+ clk->mode = (actual_rate == CLK_44EN_RATE) ? 0 : 1; -+ return 0; -+} -+ -+ -+const struct clk_ops clk_hifiberry_dacpro_rate_ops = { -+ .recalc_rate = clk_hifiberry_dacpro_recalc_rate, -+ .round_rate = clk_hifiberry_dacpro_round_rate, -+ .set_rate = clk_hifiberry_dacpro_set_rate, -+}; -+ -+static int clk_hifiberry_dacpro_probe(struct platform_device *pdev) -+{ -+ int ret; -+ struct clk_hifiberry_hw *proclk; -+ struct clk *clk; -+ struct device *dev; -+ struct clk_init_data init; -+ -+ dev = &pdev->dev; -+ -+ proclk = kzalloc(sizeof(struct clk_hifiberry_hw), GFP_KERNEL); -+ if (!proclk) -+ return -ENOMEM; -+ -+ init.name = "clk-hifiberry-dacpro"; -+ init.ops = &clk_hifiberry_dacpro_rate_ops; -+ init.flags = CLK_IS_BASIC; -+ init.parent_names = NULL; -+ init.num_parents = 0; -+ -+ proclk->mode = 0; -+ proclk->hw.init = &init; -+ -+ clk = devm_clk_register(dev, &proclk->hw); -+ if (!IS_ERR(clk)) { -+ ret = of_clk_add_provider(dev->of_node, of_clk_src_simple_get, -+ clk); -+ } else { -+ dev_err(dev, "Fail to register clock driver\n"); -+ kfree(proclk); -+ ret = PTR_ERR(clk); -+ } -+ return ret; -+} -+ -+static int clk_hifiberry_dacpro_remove(struct platform_device *pdev) -+{ -+ of_clk_del_provider(pdev->dev.of_node); -+ return 0; -+} -+ -+static struct platform_driver clk_hifiberry_dacpro_driver = { -+ .probe = clk_hifiberry_dacpro_probe, -+ .remove = clk_hifiberry_dacpro_remove, -+ .driver = { -+ .name = "clk-hifiberry-dacpro", -+ .of_match_table = clk_hifiberry_dacpro_dt_ids, -+ }, -+}; -+ -+static int __init clk_hifiberry_dacpro_init(void) -+{ -+ return platform_driver_register(&clk_hifiberry_dacpro_driver); -+} -+core_initcall(clk_hifiberry_dacpro_init); -+ -+static void __exit clk_hifiberry_dacpro_exit(void) -+{ -+ platform_driver_unregister(&clk_hifiberry_dacpro_driver); -+} -+module_exit(clk_hifiberry_dacpro_exit); -+ -+MODULE_DESCRIPTION("HiFiBerry DAC Pro clock driver"); -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:clk-hifiberry-dacpro"); ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -24,6 +24,13 @@ config SND_BCM2708_SOC_HIFIBERRY_DAC - help - Say Y or M if you want to add support for HifiBerry DAC. - -+config SND_BCM2708_SOC_HIFIBERRY_DACPLUS -+ tristate "Support for HifiBerry DAC+" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_PCM512x -+ help -+ Say Y or M if you want to add support for HifiBerry DAC+. -+ - config SND_BCM2708_SOC_HIFIBERRY_DIGI - tristate "Support for HifiBerry Digi" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -10,11 +10,13 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc- - - # BCM2708 Machine Support - snd-soc-hifiberry-dac-objs := hifiberry_dac.o -+snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o - snd-soc-hifiberry-digi-objs := hifiberry_digi.o - snd-soc-rpi-dac-objs := rpi-dac.o - snd-soc-iqaudio-dac-objs := iqaudio-dac.o - - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o -+obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o - obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o ---- /dev/null -+++ b/sound/soc/bcm/hifiberry_dacplus.c -@@ -0,0 +1,359 @@ -+/* -+ * ASoC Driver for HiFiBerry DAC+ / DAC Pro -+ * -+ * Author: Daniel Matuschek, Stuart MacLean -+ * Copyright 2014-2015 -+ * based on code by Florian Meier -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "../codecs/pcm512x.h" -+ -+#define HIFIBERRY_DACPRO_NOCLOCK 0 -+#define HIFIBERRY_DACPRO_CLK44EN 1 -+#define HIFIBERRY_DACPRO_CLK48EN 2 -+ -+struct pcm512x_priv { -+ struct regmap *regmap; -+ struct clk *sclk; -+}; -+ -+/* Clock rate of CLK44EN attached to GPIO6 pin */ -+#define CLK_44EN_RATE 22579200UL -+/* Clock rate of CLK48EN attached to GPIO3 pin */ -+#define CLK_48EN_RATE 24576000UL -+ -+static bool slave; -+static bool snd_rpi_hifiberry_is_dacpro; -+static bool digital_gain_0db_limit = true; -+ -+static void snd_rpi_hifiberry_dacplus_select_clk(struct snd_soc_codec *codec, -+ int clk_id) -+{ -+ switch (clk_id) { -+ case HIFIBERRY_DACPRO_NOCLOCK: -+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x24, 0x00); -+ break; -+ case HIFIBERRY_DACPRO_CLK44EN: -+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x24, 0x20); -+ break; -+ case HIFIBERRY_DACPRO_CLK48EN: -+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x24, 0x04); -+ break; -+ } -+} -+ -+static void snd_rpi_hifiberry_dacplus_clk_gpio(struct snd_soc_codec *codec) -+{ -+ snd_soc_update_bits(codec, PCM512x_GPIO_EN, 0x24, 0x24); -+ snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_3, 0x0f, 0x02); -+ snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_6, 0x0f, 0x02); -+} -+ -+static bool snd_rpi_hifiberry_dacplus_is_sclk(struct snd_soc_codec *codec) -+{ -+ int sck; -+ -+ sck = snd_soc_read(codec, PCM512x_RATE_DET_4); -+ return (!(sck & 0x40)); -+} -+ -+static bool snd_rpi_hifiberry_dacplus_is_sclk_sleep( -+ struct snd_soc_codec *codec) -+{ -+ msleep(2); -+ return snd_rpi_hifiberry_dacplus_is_sclk(codec); -+} -+ -+static bool snd_rpi_hifiberry_dacplus_is_pro_card(struct snd_soc_codec *codec) -+{ -+ bool isClk44EN, isClk48En, isNoClk; -+ -+ snd_rpi_hifiberry_dacplus_clk_gpio(codec); -+ -+ snd_rpi_hifiberry_dacplus_select_clk(codec, HIFIBERRY_DACPRO_CLK44EN); -+ isClk44EN = snd_rpi_hifiberry_dacplus_is_sclk_sleep(codec); -+ -+ snd_rpi_hifiberry_dacplus_select_clk(codec, HIFIBERRY_DACPRO_NOCLOCK); -+ isNoClk = snd_rpi_hifiberry_dacplus_is_sclk_sleep(codec); -+ -+ snd_rpi_hifiberry_dacplus_select_clk(codec, HIFIBERRY_DACPRO_CLK48EN); -+ isClk48En = snd_rpi_hifiberry_dacplus_is_sclk_sleep(codec); -+ -+ return (isClk44EN && isClk48En && !isNoClk); -+} -+ -+static int snd_rpi_hifiberry_dacplus_clk_for_rate(int sample_rate) -+{ -+ int type; -+ -+ switch (sample_rate) { -+ case 11025: -+ case 22050: -+ case 44100: -+ case 88200: -+ case 176400: -+ type = HIFIBERRY_DACPRO_CLK44EN; -+ break; -+ default: -+ type = HIFIBERRY_DACPRO_CLK48EN; -+ break; -+ } -+ return type; -+} -+ -+static void snd_rpi_hifiberry_dacplus_set_sclk(struct snd_soc_codec *codec, -+ int sample_rate) -+{ -+ struct pcm512x_priv *pcm512x = snd_soc_codec_get_drvdata(codec); -+ -+ if (!IS_ERR(pcm512x->sclk)) { -+ int ctype; -+ -+ ctype = snd_rpi_hifiberry_dacplus_clk_for_rate(sample_rate); -+ clk_set_rate(pcm512x->sclk, (ctype == HIFIBERRY_DACPRO_CLK44EN) -+ ? CLK_44EN_RATE : CLK_48EN_RATE); -+ snd_rpi_hifiberry_dacplus_select_clk(codec, ctype); -+ } -+} -+ -+static int snd_rpi_hifiberry_dacplus_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ struct snd_soc_codec *codec = rtd->codec; -+ struct pcm512x_priv *priv; -+ -+ if (slave) -+ snd_rpi_hifiberry_is_dacpro = false; -+ else -+ snd_rpi_hifiberry_is_dacpro = -+ snd_rpi_hifiberry_dacplus_is_pro_card(codec); -+ -+ if (snd_rpi_hifiberry_is_dacpro) { -+ struct snd_soc_dai_link *dai = rtd->dai_link; -+ -+ dai->name = "HiFiBerry DAC+ Pro"; -+ dai->stream_name = "HiFiBerry DAC+ Pro HiFi"; -+ dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF -+ | SND_SOC_DAIFMT_CBM_CFM; -+ -+ snd_soc_update_bits(codec, PCM512x_BCLK_LRCLK_CFG, 0x31, 0x11); -+ snd_soc_update_bits(codec, PCM512x_MASTER_MODE, 0x03, 0x03); -+ snd_soc_update_bits(codec, PCM512x_MASTER_CLKDIV_2, 0x7f, 63); -+ } else { -+ priv = snd_soc_codec_get_drvdata(codec); -+ priv->sclk = ERR_PTR(-ENOENT); -+ } -+ -+ snd_soc_update_bits(codec, PCM512x_GPIO_EN, 0x08, 0x08); -+ snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_4, 0x0f, 0x02); -+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); -+ -+ if (digital_gain_0db_limit) -+ { -+ int ret; -+ struct snd_soc_card *card = rtd->card; -+ -+ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); -+ if (ret < 0) -+ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); -+ } -+ -+ return 0; -+} -+ -+static int snd_rpi_hifiberry_dacplus_update_rate_den( -+ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_codec *codec = rtd->codec; -+ struct pcm512x_priv *pcm512x = snd_soc_codec_get_drvdata(codec); -+ struct snd_ratnum *rats_no_pll; -+ unsigned int num = 0, den = 0; -+ int err; -+ -+ rats_no_pll = devm_kzalloc(rtd->dev, sizeof(*rats_no_pll), GFP_KERNEL); -+ if (!rats_no_pll) -+ return -ENOMEM; -+ -+ rats_no_pll->num = clk_get_rate(pcm512x->sclk) / 64; -+ rats_no_pll->den_min = 1; -+ rats_no_pll->den_max = 128; -+ rats_no_pll->den_step = 1; -+ -+ err = snd_interval_ratnum(hw_param_interval(params, -+ SNDRV_PCM_HW_PARAM_RATE), 1, rats_no_pll, &num, &den); -+ if (err >= 0 && den) { -+ params->rate_num = num; -+ params->rate_den = den; -+ } -+ -+ devm_kfree(rtd->dev, rats_no_pll); -+ return 0; -+} -+ -+static int snd_rpi_hifiberry_dacplus_set_bclk_ratio_pro( -+ struct snd_soc_dai *cpu_dai, struct snd_pcm_hw_params *params) -+{ -+ int bratio = snd_pcm_format_physical_width(params_format(params)) -+ * params_channels(params); -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, bratio); -+} -+ -+static int snd_rpi_hifiberry_dacplus_hw_params( -+ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) -+{ -+ int ret; -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ -+ if (snd_rpi_hifiberry_is_dacpro) { -+ struct snd_soc_codec *codec = rtd->codec; -+ -+ snd_rpi_hifiberry_dacplus_set_sclk(codec, -+ params_rate(params)); -+ -+ ret = snd_rpi_hifiberry_dacplus_set_bclk_ratio_pro(cpu_dai, -+ params); -+ if (!ret) -+ ret = snd_rpi_hifiberry_dacplus_update_rate_den( -+ substream, params); -+ } else { -+ ret = snd_soc_dai_set_bclk_ratio(cpu_dai, 64); -+ } -+ return ret; -+} -+ -+static int snd_rpi_hifiberry_dacplus_startup( -+ struct snd_pcm_substream *substream) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_codec *codec = rtd->codec; -+ -+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); -+ return 0; -+} -+ -+static void snd_rpi_hifiberry_dacplus_shutdown( -+ struct snd_pcm_substream *substream) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_codec *codec = rtd->codec; -+ -+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08, 0x00); -+} -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_rpi_hifiberry_dacplus_ops = { -+ .hw_params = snd_rpi_hifiberry_dacplus_hw_params, -+ .startup = snd_rpi_hifiberry_dacplus_startup, -+ .shutdown = snd_rpi_hifiberry_dacplus_shutdown, -+}; -+ -+static struct snd_soc_dai_link snd_rpi_hifiberry_dacplus_dai[] = { -+{ -+ .name = "HiFiBerry DAC+", -+ .stream_name = "HiFiBerry DAC+ HiFi", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "pcm512x-hifi", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "pcm512x.1-004d", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBS_CFS, -+ .ops = &snd_rpi_hifiberry_dacplus_ops, -+ .init = snd_rpi_hifiberry_dacplus_init, -+}, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_rpi_hifiberry_dacplus = { -+ .name = "snd_rpi_hifiberry_dacplus", -+ .driver_name = "HifiberryDacp", -+ .owner = THIS_MODULE, -+ .dai_link = snd_rpi_hifiberry_dacplus_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_dacplus_dai), -+}; -+ -+static int snd_rpi_hifiberry_dacplus_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ -+ snd_rpi_hifiberry_dacplus.dev = &pdev->dev; -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai; -+ -+ dai = &snd_rpi_hifiberry_dacplus_dai[0]; -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } -+ -+ digital_gain_0db_limit = !of_property_read_bool( -+ pdev->dev.of_node, "hifiberry,24db_digital_gain"); -+ slave = of_property_read_bool(pdev->dev.of_node, -+ "hifiberry-dacplus,slave"); -+ } -+ -+ ret = snd_soc_register_card(&snd_rpi_hifiberry_dacplus); -+ if (ret) -+ dev_err(&pdev->dev, -+ "snd_soc_register_card() failed: %d\n", ret); -+ -+ return ret; -+} -+ -+static int snd_rpi_hifiberry_dacplus_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&snd_rpi_hifiberry_dacplus); -+} -+ -+static const struct of_device_id snd_rpi_hifiberry_dacplus_of_match[] = { -+ { .compatible = "hifiberry,hifiberry-dacplus", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_dacplus_of_match); -+ -+static struct platform_driver snd_rpi_hifiberry_dacplus_driver = { -+ .driver = { -+ .name = "snd-rpi-hifiberry-dacplus", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_rpi_hifiberry_dacplus_of_match, -+ }, -+ .probe = snd_rpi_hifiberry_dacplus_probe, -+ .remove = snd_rpi_hifiberry_dacplus_remove, -+}; -+ -+module_platform_driver(snd_rpi_hifiberry_dacplus_driver); -+ -+MODULE_AUTHOR("Daniel Matuschek "); -+MODULE_DESCRIPTION("ASoC Driver for HiFiBerry DAC+"); -+MODULE_LICENSE("GPL v2"); ---- a/sound/soc/codecs/pcm512x.c -+++ b/sound/soc/codecs/pcm512x.c -@@ -854,7 +854,8 @@ static int pcm512x_set_dividers(struct s - int fssp; - int gpio; - -- lrclk_div = snd_soc_params_to_frame_size(params); -+ lrclk_div = snd_pcm_format_physical_width(params_format(params)) -+ * params_channels(params); - if (lrclk_div == 0) { - dev_err(dev, "No LRCLK?\n"); - return -EINVAL; diff --git a/target/linux/brcm2708/patches-4.9/0073-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch b/target/linux/brcm2708/patches-4.9/0073-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch deleted file mode 100644 index 9826be5725cf..000000000000 --- a/target/linux/brcm2708/patches-4.9/0073-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch +++ /dev/null @@ -1,825 +0,0 @@ -From 0f11b0757d5950ee7a8ba00e49ebefd2c649a6ba Mon Sep 17 00:00:00 2001 -From: Daniel Matuschek -Date: Mon, 4 Aug 2014 11:09:58 +0200 -Subject: [PATCH] Added driver for HiFiBerry Amp amplifier add-on board - -The driver contains a low-level hardware driver for the TAS5713 and the -drivers for the Raspberry Pi I2S subsystem. - -TAS5713: return error if initialisation fails - -Existing TAS5713 driver logs errors during initialisation, but does not return -an error code. Therefore even if initialisation fails, the driver will still be -loaded, but won't work. This patch fixes this. I2C communication error will now -reported correctly by a non-zero return code. - -HiFiBerry Amp: fix device-tree problems - -Some code to load the driver based on device-tree-overlays was missing. This is added by this patch. - -hifiberry-amp: Adjust for ALSA object refactoring - -See: https://github.com/raspberrypi/linux/issues/1775 ---- - sound/soc/bcm/Kconfig | 7 + - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/hifiberry_amp.c | 129 +++++++++++++++ - sound/soc/codecs/Kconfig | 4 + - sound/soc/codecs/Makefile | 2 + - sound/soc/codecs/tas5713.c | 371 ++++++++++++++++++++++++++++++++++++++++++ - sound/soc/codecs/tas5713.h | 210 ++++++++++++++++++++++++ - 7 files changed, 725 insertions(+) - create mode 100644 sound/soc/bcm/hifiberry_amp.c - create mode 100644 sound/soc/codecs/tas5713.c - create mode 100644 sound/soc/codecs/tas5713.h - ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -38,6 +38,13 @@ config SND_BCM2708_SOC_HIFIBERRY_DIGI - help - Say Y or M if you want to add support for HifiBerry Digi S/PDIF output board. - -+config SND_BCM2708_SOC_HIFIBERRY_AMP -+ tristate "Support for the HifiBerry Amp" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_TAS5713 -+ help -+ Say Y or M if you want to add support for the HifiBerry Amp amplifier board. -+ - config SND_BCM2708_SOC_RPI_DAC - tristate "Support for RPi-DAC" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -9,12 +9,14 @@ snd-soc-cygnus-objs := cygnus-pcm.o cygn - obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o - - # BCM2708 Machine Support -+snd-soc-hifiberry-amp-objs := hifiberry_amp.o - snd-soc-hifiberry-dac-objs := hifiberry_dac.o - snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o - snd-soc-hifiberry-digi-objs := hifiberry_digi.o - snd-soc-rpi-dac-objs := rpi-dac.o - snd-soc-iqaudio-dac-objs := iqaudio-dac.o - -+obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o ---- /dev/null -+++ b/sound/soc/bcm/hifiberry_amp.c -@@ -0,0 +1,129 @@ -+/* -+ * ASoC Driver for HifiBerry AMP -+ * -+ * Author: Sebastian Eickhoff -+ * Copyright 2014 -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+static int snd_rpi_hifiberry_amp_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ // ToDo: init of the dsp-registers. -+ return 0; -+} -+ -+static int snd_rpi_hifiberry_amp_hw_params( struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params ) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 64); -+} -+ -+static struct snd_soc_ops snd_rpi_hifiberry_amp_ops = { -+ .hw_params = snd_rpi_hifiberry_amp_hw_params, -+}; -+ -+static struct snd_soc_dai_link snd_rpi_hifiberry_amp_dai[] = { -+ { -+ .name = "HifiBerry AMP", -+ .stream_name = "HifiBerry AMP HiFi", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "tas5713-hifi", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "tas5713.1-001b", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | -+ SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBS_CFS, -+ .ops = &snd_rpi_hifiberry_amp_ops, -+ .init = snd_rpi_hifiberry_amp_init, -+ }, -+}; -+ -+ -+static struct snd_soc_card snd_rpi_hifiberry_amp = { -+ .name = "snd_rpi_hifiberry_amp", -+ .driver_name = "HifiberryAmp", -+ .owner = THIS_MODULE, -+ .dai_link = snd_rpi_hifiberry_amp_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_amp_dai), -+}; -+ -+static const struct of_device_id snd_rpi_hifiberry_amp_of_match[] = { -+ { .compatible = "hifiberry,hifiberry-amp", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_amp_of_match); -+ -+ -+static int snd_rpi_hifiberry_amp_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ -+ snd_rpi_hifiberry_amp.dev = &pdev->dev; -+ -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai = &snd_rpi_hifiberry_amp_dai[0]; -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } -+ } -+ -+ ret = snd_soc_register_card(&snd_rpi_hifiberry_amp); -+ -+ if (ret != 0) { -+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); -+ } -+ -+ return ret; -+} -+ -+ -+static int snd_rpi_hifiberry_amp_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&snd_rpi_hifiberry_amp); -+} -+ -+ -+static struct platform_driver snd_rpi_hifiberry_amp_driver = { -+ .driver = { -+ .name = "snd-hifiberry-amp", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_rpi_hifiberry_amp_of_match, -+ }, -+ .probe = snd_rpi_hifiberry_amp_probe, -+ .remove = snd_rpi_hifiberry_amp_remove, -+}; -+ -+ -+module_platform_driver(snd_rpi_hifiberry_amp_driver); -+ -+ -+MODULE_AUTHOR("Sebastian Eickhoff "); -+MODULE_DESCRIPTION("ASoC driver for HiFiBerry-AMP"); -+MODULE_LICENSE("GPL v2"); ---- a/sound/soc/codecs/Kconfig -+++ b/sound/soc/codecs/Kconfig -@@ -139,6 +139,7 @@ config SND_SOC_ALL_CODECS - select SND_SOC_TFA9879 if I2C - select SND_SOC_TLV320AIC23_I2C if I2C - select SND_SOC_TLV320AIC23_SPI if SPI_MASTER -+ select SND_SOC_TAS5713 if I2C - select SND_SOC_TLV320AIC26 if SPI_MASTER - select SND_SOC_TLV320AIC31XX if I2C - select SND_SOC_TLV320AIC32X4_I2C if I2C -@@ -821,6 +822,9 @@ config SND_SOC_TFA9879 - tristate "NXP Semiconductors TFA9879 amplifier" - depends on I2C - -+config SND_SOC_TAS5713 -+ tristate -+ - config SND_SOC_TLV320AIC23 - tristate - ---- a/sound/soc/codecs/Makefile -+++ b/sound/soc/codecs/Makefile -@@ -144,6 +144,7 @@ snd-soc-tas5086-objs := tas5086.o - snd-soc-tas571x-objs := tas571x.o - snd-soc-tas5720-objs := tas5720.o - snd-soc-tfa9879-objs := tfa9879.o -+snd-soc-tas5713-objs := tas5713.o - snd-soc-tlv320aic23-objs := tlv320aic23.o - snd-soc-tlv320aic23-i2c-objs := tlv320aic23-i2c.o - snd-soc-tlv320aic23-spi-objs := tlv320aic23-spi.o -@@ -366,6 +367,7 @@ obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc - obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o - obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o - obj-$(CONFIG_SND_SOC_TFA9879) += snd-soc-tfa9879.o -+obj-$(CONFIG_SND_SOC_TAS5713) += snd-soc-tas5713.o - obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o - obj-$(CONFIG_SND_SOC_TLV320AIC23_I2C) += snd-soc-tlv320aic23-i2c.o - obj-$(CONFIG_SND_SOC_TLV320AIC23_SPI) += snd-soc-tlv320aic23-spi.o ---- /dev/null -+++ b/sound/soc/codecs/tas5713.c -@@ -0,0 +1,371 @@ -+/* -+ * ASoC Driver for TAS5713 -+ * -+ * Author: Sebastian Eickhoff -+ * Copyright 2014 -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "tas5713.h" -+ -+ -+static struct i2c_client *i2c; -+ -+struct tas5713_priv { -+ struct regmap *regmap; -+ int mclk_div; -+ struct snd_soc_codec *codec; -+}; -+ -+static struct tas5713_priv *priv_data; -+ -+ -+ -+ -+/* -+ * _ _ ___ _ ___ _ _ -+ * /_\ | | / __| /_\ / __|___ _ _| |_ _ _ ___| |___ -+ * / _ \| |__\__ \/ _ \ | (__/ _ \ ' \ _| '_/ _ \ (_-< -+ * /_/ \_\____|___/_/ \_\ \___\___/_||_\__|_| \___/_/__/ -+ * -+ */ -+ -+static const DECLARE_TLV_DB_SCALE(tas5713_vol_tlv, -10000, 50, 1); -+ -+ -+static const struct snd_kcontrol_new tas5713_snd_controls[] = { -+ SOC_SINGLE_TLV ("Master" , TAS5713_VOL_MASTER, 0, 248, 1, tas5713_vol_tlv), -+ SOC_DOUBLE_R_TLV("Channels" , TAS5713_VOL_CH1, TAS5713_VOL_CH2, 0, 248, 1, tas5713_vol_tlv) -+}; -+ -+ -+ -+ -+/* -+ * __ __ _ _ ___ _ -+ * | \/ |__ _ __| |_ (_)_ _ ___ | \ _ _(_)_ _____ _ _ -+ * | |\/| / _` / _| ' \| | ' \/ -_) | |) | '_| \ V / -_) '_| -+ * |_| |_\__,_\__|_||_|_|_||_\___| |___/|_| |_|\_/\___|_| -+ * -+ */ -+ -+static int tas5713_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params, -+ struct snd_soc_dai *dai) -+{ -+ u16 blen = 0x00; -+ -+ struct snd_soc_codec *codec; -+ codec = dai->codec; -+ priv_data->codec = dai->codec; -+ -+ switch (params_format(params)) { -+ case SNDRV_PCM_FORMAT_S16_LE: -+ blen = 0x03; -+ break; -+ case SNDRV_PCM_FORMAT_S20_3LE: -+ blen = 0x1; -+ break; -+ case SNDRV_PCM_FORMAT_S24_LE: -+ blen = 0x04; -+ break; -+ case SNDRV_PCM_FORMAT_S32_LE: -+ blen = 0x05; -+ break; -+ default: -+ dev_err(dai->dev, "Unsupported word length: %u\n", -+ params_format(params)); -+ return -EINVAL; -+ } -+ -+ // set word length -+ snd_soc_update_bits(codec, TAS5713_SERIAL_DATA_INTERFACE, 0x7, blen); -+ -+ return 0; -+} -+ -+ -+static int tas5713_mute_stream(struct snd_soc_dai *dai, int mute, int stream) -+{ -+ unsigned int val = 0; -+ -+ struct tas5713_priv *tas5713; -+ struct snd_soc_codec *codec = dai->codec; -+ tas5713 = snd_soc_codec_get_drvdata(codec); -+ -+ if (mute) { -+ val = TAS5713_SOFT_MUTE_ALL; -+ } -+ -+ return regmap_write(tas5713->regmap, TAS5713_SOFT_MUTE, val); -+} -+ -+ -+static const struct snd_soc_dai_ops tas5713_dai_ops = { -+ .hw_params = tas5713_hw_params, -+ .mute_stream = tas5713_mute_stream, -+}; -+ -+ -+static struct snd_soc_dai_driver tas5713_dai = { -+ .name = "tas5713-hifi", -+ .playback = { -+ .stream_name = "Playback", -+ .channels_min = 2, -+ .channels_max = 2, -+ .rates = SNDRV_PCM_RATE_8000_48000, -+ .formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE ), -+ }, -+ .ops = &tas5713_dai_ops, -+}; -+ -+ -+ -+ -+/* -+ * ___ _ ___ _ -+ * / __|___ __| |___ __ | \ _ _(_)_ _____ _ _ -+ * | (__/ _ \/ _` / -_) _| | |) | '_| \ V / -_) '_| -+ * \___\___/\__,_\___\__| |___/|_| |_|\_/\___|_| -+ * -+ */ -+ -+static int tas5713_remove(struct snd_soc_codec *codec) -+{ -+ struct tas5713_priv *tas5713; -+ -+ tas5713 = snd_soc_codec_get_drvdata(codec); -+ -+ return 0; -+} -+ -+ -+static int tas5713_probe(struct snd_soc_codec *codec) -+{ -+ struct tas5713_priv *tas5713; -+ int i, ret; -+ -+ i2c = container_of(codec->dev, struct i2c_client, dev); -+ -+ tas5713 = snd_soc_codec_get_drvdata(codec); -+ -+ // Reset error -+ ret = snd_soc_write(codec, TAS5713_ERROR_STATUS, 0x00); -+ if (ret < 0) return ret; -+ -+ // Trim oscillator -+ ret = snd_soc_write(codec, TAS5713_OSC_TRIM, 0x00); -+ if (ret < 0) return ret; -+ msleep(1000); -+ -+ // Reset error -+ ret = snd_soc_write(codec, TAS5713_ERROR_STATUS, 0x00); -+ if (ret < 0) return ret; -+ -+ // Clock mode: 44/48kHz, MCLK=64xfs -+ ret = snd_soc_write(codec, TAS5713_CLOCK_CTRL, 0x60); -+ if (ret < 0) return ret; -+ -+ // I2S 24bit -+ ret = snd_soc_write(codec, TAS5713_SERIAL_DATA_INTERFACE, 0x05); -+ if (ret < 0) return ret; -+ -+ // Unmute -+ ret = snd_soc_write(codec, TAS5713_SYSTEM_CTRL2, 0x00); -+ if (ret < 0) return ret; -+ ret = snd_soc_write(codec, TAS5713_SOFT_MUTE, 0x00); -+ if (ret < 0) return ret; -+ -+ // Set volume to 0db -+ ret = snd_soc_write(codec, TAS5713_VOL_MASTER, 0x00); -+ if (ret < 0) return ret; -+ -+ // Now start programming the default initialization sequence -+ for (i = 0; i < ARRAY_SIZE(tas5713_init_sequence); ++i) { -+ ret = i2c_master_send(i2c, -+ tas5713_init_sequence[i].data, -+ tas5713_init_sequence[i].size); -+ if (ret < 0) { -+ printk(KERN_INFO "TAS5713 CODEC PROBE: InitSeq returns: %d\n", ret); -+ } -+ } -+ -+ // Unmute -+ ret = snd_soc_write(codec, TAS5713_SYSTEM_CTRL2, 0x00); -+ if (ret < 0) return ret; -+ -+ return 0; -+} -+ -+ -+static struct snd_soc_codec_driver soc_codec_dev_tas5713 = { -+ .probe = tas5713_probe, -+ .remove = tas5713_remove, -+ .component_driver = { -+ .controls = tas5713_snd_controls, -+ .num_controls = ARRAY_SIZE(tas5713_snd_controls), -+ }, -+}; -+ -+ -+ -+ -+/* -+ * ___ ___ ___ ___ _ -+ * |_ _|_ ) __| | \ _ _(_)_ _____ _ _ -+ * | | / / (__ | |) | '_| \ V / -_) '_| -+ * |___/___\___| |___/|_| |_|\_/\___|_| -+ * -+ */ -+ -+static const struct reg_default tas5713_reg_defaults[] = { -+ { 0x07 ,0x80 }, // R7 - VOL_MASTER - -40dB -+ { 0x08 , 30 }, // R8 - VOL_CH1 - 0dB -+ { 0x09 , 30 }, // R9 - VOL_CH2 - 0dB -+ { 0x0A ,0x80 }, // R10 - VOL_HEADPHONE - -40dB -+}; -+ -+ -+static bool tas5713_reg_volatile(struct device *dev, unsigned int reg) -+{ -+ switch (reg) { -+ case TAS5713_DEVICE_ID: -+ case TAS5713_ERROR_STATUS: -+ return true; -+ default: -+ return false; -+ } -+} -+ -+ -+static const struct of_device_id tas5713_of_match[] = { -+ { .compatible = "ti,tas5713", }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, tas5713_of_match); -+ -+ -+static struct regmap_config tas5713_regmap_config = { -+ .reg_bits = 8, -+ .val_bits = 8, -+ -+ .max_register = TAS5713_MAX_REGISTER, -+ .volatile_reg = tas5713_reg_volatile, -+ -+ .cache_type = REGCACHE_RBTREE, -+ .reg_defaults = tas5713_reg_defaults, -+ .num_reg_defaults = ARRAY_SIZE(tas5713_reg_defaults), -+}; -+ -+ -+static int tas5713_i2c_probe(struct i2c_client *i2c, -+ const struct i2c_device_id *id) -+{ -+ int ret; -+ -+ priv_data = devm_kzalloc(&i2c->dev, sizeof *priv_data, GFP_KERNEL); -+ if (!priv_data) -+ return -ENOMEM; -+ -+ priv_data->regmap = devm_regmap_init_i2c(i2c, &tas5713_regmap_config); -+ if (IS_ERR(priv_data->regmap)) { -+ ret = PTR_ERR(priv_data->regmap); -+ return ret; -+ } -+ -+ i2c_set_clientdata(i2c, priv_data); -+ -+ ret = snd_soc_register_codec(&i2c->dev, -+ &soc_codec_dev_tas5713, &tas5713_dai, 1); -+ -+ return ret; -+} -+ -+ -+static int tas5713_i2c_remove(struct i2c_client *i2c) -+{ -+ snd_soc_unregister_codec(&i2c->dev); -+ i2c_set_clientdata(i2c, NULL); -+ -+ kfree(priv_data); -+ -+ return 0; -+} -+ -+ -+static const struct i2c_device_id tas5713_i2c_id[] = { -+ { "tas5713", 0 }, -+ { } -+}; -+ -+MODULE_DEVICE_TABLE(i2c, tas5713_i2c_id); -+ -+ -+static struct i2c_driver tas5713_i2c_driver = { -+ .driver = { -+ .name = "tas5713", -+ .owner = THIS_MODULE, -+ .of_match_table = tas5713_of_match, -+ }, -+ .probe = tas5713_i2c_probe, -+ .remove = tas5713_i2c_remove, -+ .id_table = tas5713_i2c_id -+}; -+ -+ -+static int __init tas5713_modinit(void) -+{ -+ int ret = 0; -+ -+ ret = i2c_add_driver(&tas5713_i2c_driver); -+ if (ret) { -+ printk(KERN_ERR "Failed to register tas5713 I2C driver: %d\n", -+ ret); -+ } -+ -+ return ret; -+} -+module_init(tas5713_modinit); -+ -+ -+static void __exit tas5713_exit(void) -+{ -+ i2c_del_driver(&tas5713_i2c_driver); -+} -+module_exit(tas5713_exit); -+ -+ -+MODULE_AUTHOR("Sebastian Eickhoff "); -+MODULE_DESCRIPTION("ASoC driver for TAS5713"); -+MODULE_LICENSE("GPL v2"); ---- /dev/null -+++ b/sound/soc/codecs/tas5713.h -@@ -0,0 +1,210 @@ -+/* -+ * ASoC Driver for TAS5713 -+ * -+ * Author: Sebastian Eickhoff -+ * Copyright 2014 -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#ifndef _TAS5713_H -+#define _TAS5713_H -+ -+ -+// TAS5713 I2C-bus register addresses -+ -+#define TAS5713_CLOCK_CTRL 0x00 -+#define TAS5713_DEVICE_ID 0x01 -+#define TAS5713_ERROR_STATUS 0x02 -+#define TAS5713_SYSTEM_CTRL1 0x03 -+#define TAS5713_SERIAL_DATA_INTERFACE 0x04 -+#define TAS5713_SYSTEM_CTRL2 0x05 -+#define TAS5713_SOFT_MUTE 0x06 -+#define TAS5713_VOL_MASTER 0x07 -+#define TAS5713_VOL_CH1 0x08 -+#define TAS5713_VOL_CH2 0x09 -+#define TAS5713_VOL_HEADPHONE 0x0A -+#define TAS5713_VOL_CONFIG 0x0E -+#define TAS5713_MODULATION_LIMIT 0x10 -+#define TAS5713_IC_DLY_CH1 0x11 -+#define TAS5713_IC_DLY_CH2 0x12 -+#define TAS5713_IC_DLY_CH3 0x13 -+#define TAS5713_IC_DLY_CH4 0x14 -+ -+#define TAS5713_START_STOP_PERIOD 0x1A -+#define TAS5713_OSC_TRIM 0x1B -+#define TAS5713_BKND_ERR 0x1C -+ -+#define TAS5713_INPUT_MUX 0x20 -+#define TAS5713_SRC_SELECT_CH4 0x21 -+#define TAS5713_PWM_MUX 0x25 -+ -+#define TAS5713_CH1_BQ0 0x29 -+#define TAS5713_CH1_BQ1 0x2A -+#define TAS5713_CH1_BQ2 0x2B -+#define TAS5713_CH1_BQ3 0x2C -+#define TAS5713_CH1_BQ4 0x2D -+#define TAS5713_CH1_BQ5 0x2E -+#define TAS5713_CH1_BQ6 0x2F -+#define TAS5713_CH1_BQ7 0x58 -+#define TAS5713_CH1_BQ8 0x59 -+ -+#define TAS5713_CH2_BQ0 0x30 -+#define TAS5713_CH2_BQ1 0x31 -+#define TAS5713_CH2_BQ2 0x32 -+#define TAS5713_CH2_BQ3 0x33 -+#define TAS5713_CH2_BQ4 0x34 -+#define TAS5713_CH2_BQ5 0x35 -+#define TAS5713_CH2_BQ6 0x36 -+#define TAS5713_CH2_BQ7 0x5C -+#define TAS5713_CH2_BQ8 0x5D -+ -+#define TAS5713_CH4_BQ0 0x5A -+#define TAS5713_CH4_BQ1 0x5B -+#define TAS5713_CH3_BQ0 0x5E -+#define TAS5713_CH3_BQ1 0x5F -+ -+#define TAS5713_DRC1_SOFTENING_FILTER_ALPHA_OMEGA 0x3B -+#define TAS5713_DRC1_ATTACK_RELEASE_RATE 0x3C -+#define TAS5713_DRC2_SOFTENING_FILTER_ALPHA_OMEGA 0x3E -+#define TAS5713_DRC2_ATTACK_RELEASE_RATE 0x3F -+#define TAS5713_DRC1_ATTACK_RELEASE_THRES 0x40 -+#define TAS5713_DRC2_ATTACK_RELEASE_THRES 0x43 -+#define TAS5713_DRC_CTRL 0x46 -+ -+#define TAS5713_BANK_SW_CTRL 0x50 -+#define TAS5713_CH1_OUTPUT_MIXER 0x51 -+#define TAS5713_CH2_OUTPUT_MIXER 0x52 -+#define TAS5713_CH1_INPUT_MIXER 0x53 -+#define TAS5713_CH2_INPUT_MIXER 0x54 -+#define TAS5713_OUTPUT_POST_SCALE 0x56 -+#define TAS5713_OUTPUT_PRESCALE 0x57 -+ -+#define TAS5713_IDF_POST_SCALE 0x62 -+ -+#define TAS5713_CH1_INLINE_MIXER 0x70 -+#define TAS5713_CH1_INLINE_DRC_EN_MIXER 0x71 -+#define TAS5713_CH1_R_CHANNEL_MIXER 0x72 -+#define TAS5713_CH1_L_CHANNEL_MIXER 0x73 -+#define TAS5713_CH2_INLINE_MIXER 0x74 -+#define TAS5713_CH2_INLINE_DRC_EN_MIXER 0x75 -+#define TAS5713_CH2_L_CHANNEL_MIXER 0x76 -+#define TAS5713_CH2_R_CHANNEL_MIXER 0x77 -+ -+#define TAS5713_UPDATE_DEV_ADDR_KEY 0xF8 -+#define TAS5713_UPDATE_DEV_ADDR_REG 0xF9 -+ -+#define TAS5713_REGISTER_COUNT 0x46 -+#define TAS5713_MAX_REGISTER 0xF9 -+ -+ -+// Bitmasks for registers -+#define TAS5713_SOFT_MUTE_ALL 0x07 -+ -+ -+ -+struct tas5713_init_command { -+ const int size; -+ const char *const data; -+}; -+ -+static const struct tas5713_init_command tas5713_init_sequence[] = { -+ -+ // Trim oscillator -+ { .size = 2, .data = "\x1B\x00" }, -+ // System control register 1 (0x03): block DC -+ { .size = 2, .data = "\x03\x80" }, -+ // Mute everything -+ { .size = 2, .data = "\x05\x40" }, -+ // Modulation limit register (0x10): 97.7% -+ { .size = 2, .data = "\x10\x02" }, -+ // Interchannel delay registers -+ // (0x11, 0x12, 0x13, and 0x14): BD mode -+ { .size = 2, .data = "\x11\xB8" }, -+ { .size = 2, .data = "\x12\x60" }, -+ { .size = 2, .data = "\x13\xA0" }, -+ { .size = 2, .data = "\x14\x48" }, -+ // PWM shutdown group register (0x19): no shutdown -+ { .size = 2, .data = "\x19\x00" }, -+ // Input multiplexer register (0x20): BD mode -+ { .size = 2, .data = "\x20\x00\x89\x77\x72" }, -+ // PWM output mux register (0x25) -+ // Channel 1 --> OUTA, channel 1 neg --> OUTB -+ // Channel 2 --> OUTC, channel 2 neg --> OUTD -+ { .size = 5, .data = "\x25\x01\x02\x13\x45" }, -+ // DRC control (0x46): DRC off -+ { .size = 5, .data = "\x46\x00\x00\x00\x00" }, -+ // BKND_ERR register (0x1C): 299ms reset period -+ { .size = 2, .data = "\x1C\x07" }, -+ // Mute channel 3 -+ { .size = 2, .data = "\x0A\xFF" }, -+ // Volume configuration register (0x0E): volume slew 512 steps -+ { .size = 2, .data = "\x0E\x90" }, -+ // Clock control register (0x00): 44/48kHz, MCLK=64xfs -+ { .size = 2, .data = "\x00\x60" }, -+ // Bank switch and eq control (0x50): no bank switching -+ { .size = 5, .data = "\x50\x00\x00\x00\x00" }, -+ // Volume registers (0x07, 0x08, 0x09, 0x0A) -+ { .size = 2, .data = "\x07\x20" }, -+ { .size = 2, .data = "\x08\x30" }, -+ { .size = 2, .data = "\x09\x30" }, -+ { .size = 2, .data = "\x0A\xFF" }, -+ // 0x72, 0x73, 0x76, 0x77 input mixer: -+ // no intermix between channels -+ { .size = 5, .data = "\x72\x00\x00\x00\x00" }, -+ { .size = 5, .data = "\x73\x00\x80\x00\x00" }, -+ { .size = 5, .data = "\x76\x00\x00\x00\x00" }, -+ { .size = 5, .data = "\x77\x00\x80\x00\x00" }, -+ // 0x70, 0x71, 0x74, 0x75 inline DRC mixer: -+ // no inline DRC inmix -+ { .size = 5, .data = "\x70\x00\x80\x00\x00" }, -+ { .size = 5, .data = "\x71\x00\x00\x00\x00" }, -+ { .size = 5, .data = "\x74\x00\x80\x00\x00" }, -+ { .size = 5, .data = "\x75\x00\x00\x00\x00" }, -+ // 0x56, 0x57 Output scale -+ { .size = 5, .data = "\x56\x00\x80\x00\x00" }, -+ { .size = 5, .data = "\x57\x00\x02\x00\x00" }, -+ // 0x3B, 0x3c -+ { .size = 9, .data = "\x3B\x00\x08\x00\x00\x00\x78\x00\x00" }, -+ { .size = 9, .data = "\x3C\x00\x00\x01\x00\xFF\xFF\xFF\x00" }, -+ { .size = 9, .data = "\x3E\x00\x08\x00\x00\x00\x78\x00\x00" }, -+ { .size = 9, .data = "\x3F\x00\x00\x01\x00\xFF\xFF\xFF\x00" }, -+ { .size = 9, .data = "\x40\x00\x00\x01\x00\xFF\xFF\xFF\x00" }, -+ { .size = 9, .data = "\x43\x00\x00\x01\x00\xFF\xFF\xFF\x00" }, -+ // 0x51, 0x52: output mixer -+ { .size = 9, .data = "\x51\x00\x80\x00\x00\x00\x00\x00\x00" }, -+ { .size = 9, .data = "\x52\x00\x80\x00\x00\x00\x00\x00\x00" }, -+ // PEQ defaults -+ { .size = 21, .data = "\x29\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x2A\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x2B\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x2C\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x2D\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x2E\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x2F\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x30\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x31\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x32\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x33\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x34\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x35\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x36\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x58\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x59\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x5C\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x5D\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x5E\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x5F\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x5A\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+ { .size = 21, .data = "\x5B\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, -+}; -+ -+ -+#endif /* _TAS5713_H */ diff --git a/target/linux/brcm2708/patches-4.9/0074-Update-ds1307-driver-for-device-tree-support.patch b/target/linux/brcm2708/patches-4.9/0074-Update-ds1307-driver-for-device-tree-support.patch deleted file mode 100644 index d4f7e762c2b5..000000000000 --- a/target/linux/brcm2708/patches-4.9/0074-Update-ds1307-driver-for-device-tree-support.patch +++ /dev/null @@ -1,27 +0,0 @@ -From b3ff56f28a9531048812a51ded7c16a952d1ead4 Mon Sep 17 00:00:00 2001 -From: Ryan Coe -Date: Sat, 31 Jan 2015 18:25:49 -0700 -Subject: [PATCH] Update ds1307 driver for device-tree support - -Signed-off-by: Ryan Coe ---- - drivers/rtc/rtc-ds1307.c | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/drivers/rtc/rtc-ds1307.c -+++ b/drivers/rtc/rtc-ds1307.c -@@ -1675,6 +1675,14 @@ static int ds1307_remove(struct i2c_clie - return 0; - } - -+#ifdef CONFIG_OF -+static const struct of_device_id ds1307_of_match[] = { -+ { .compatible = "maxim,ds1307" }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, ds1307_of_match); -+#endif -+ - static struct i2c_driver ds1307_driver = { - .driver = { - .name = "rtc-ds1307", diff --git a/target/linux/brcm2708/patches-4.9/0075-Add-driver-for-rpi-proto.patch b/target/linux/brcm2708/patches-4.9/0075-Add-driver-for-rpi-proto.patch deleted file mode 100644 index b8db1d560866..000000000000 --- a/target/linux/brcm2708/patches-4.9/0075-Add-driver-for-rpi-proto.patch +++ /dev/null @@ -1,211 +0,0 @@ -From b351d2ffe294c9d5e8cde9caa3a94017ecec81d9 Mon Sep 17 00:00:00 2001 -From: Waldemar Brodkorb -Date: Wed, 25 Mar 2015 09:26:17 +0100 -Subject: [PATCH] Add driver for rpi-proto - -Forward port of 3.10.x driver from https://github.com/koalo -We are using a custom board and would like to use rpi 3.18.x -kernel. Patch works fine for our embedded system. - -URL to the audio chip: -http://www.mikroe.com/add-on-boards/audio-voice/audio-codec-proto/ - -Playback tested with devicetree enabled. - -Signed-off-by: Waldemar Brodkorb ---- - sound/soc/bcm/Kconfig | 7 +++ - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/rpi-proto.c | 154 ++++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 163 insertions(+) - create mode 100644 sound/soc/bcm/rpi-proto.c - ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -52,6 +52,13 @@ config SND_BCM2708_SOC_RPI_DAC - help - Say Y or M if you want to add support for RPi-DAC. - -+config SND_BCM2708_SOC_RPI_PROTO -+ tristate "Support for Rpi-PROTO" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_WM8731 -+ help -+ Say Y or M if you want to add support for Audio Codec Board PROTO (WM8731). -+ - config SND_BCM2708_SOC_IQAUDIO_DAC - tristate "Support for IQaudIO-DAC" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -14,6 +14,7 @@ snd-soc-hifiberry-dac-objs := hifiberry_ - snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o - snd-soc-hifiberry-digi-objs := hifiberry_digi.o - snd-soc-rpi-dac-objs := rpi-dac.o -+snd-soc-rpi-proto-objs := rpi-proto.o - snd-soc-iqaudio-dac-objs := iqaudio-dac.o - - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o -@@ -21,4 +22,5 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_D - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o -+obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o - obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o ---- /dev/null -+++ b/sound/soc/bcm/rpi-proto.c -@@ -0,0 +1,154 @@ -+/* -+ * ASoC driver for PROTO AudioCODEC (with a WM8731) -+ * connected to a Raspberry Pi -+ * -+ * Author: Florian Meier, -+ * Copyright 2013 -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "../codecs/wm8731.h" -+ -+static const unsigned int wm8731_rates_12288000[] = { -+ 8000, 32000, 48000, 96000, -+}; -+ -+static struct snd_pcm_hw_constraint_list wm8731_constraints_12288000 = { -+ .list = wm8731_rates_12288000, -+ .count = ARRAY_SIZE(wm8731_rates_12288000), -+}; -+ -+static int snd_rpi_proto_startup(struct snd_pcm_substream *substream) -+{ -+ /* Setup constraints, because there is a 12.288 MHz XTAL on the board */ -+ snd_pcm_hw_constraint_list(substream->runtime, 0, -+ SNDRV_PCM_HW_PARAM_RATE, -+ &wm8731_constraints_12288000); -+ return 0; -+} -+ -+static int snd_rpi_proto_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_codec *codec = rtd->codec; -+ struct snd_soc_dai *codec_dai = rtd->codec_dai; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ int sysclk = 12288000; /* This is fixed on this board */ -+ -+ /* Set proto bclk */ -+ int ret = snd_soc_dai_set_bclk_ratio(cpu_dai,32*2); -+ if (ret < 0){ -+ dev_err(codec->dev, -+ "Failed to set BCLK ratio %d\n", ret); -+ return ret; -+ } -+ -+ /* Set proto sysclk */ -+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL, -+ sysclk, SND_SOC_CLOCK_IN); -+ if (ret < 0) { -+ dev_err(codec->dev, -+ "Failed to set WM8731 SYSCLK: %d\n", ret); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_rpi_proto_ops = { -+ .startup = snd_rpi_proto_startup, -+ .hw_params = snd_rpi_proto_hw_params, -+}; -+ -+static struct snd_soc_dai_link snd_rpi_proto_dai[] = { -+{ -+ .name = "WM8731", -+ .stream_name = "WM8731 HiFi", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "wm8731-hifi", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "wm8731.1-001a", -+ .dai_fmt = SND_SOC_DAIFMT_I2S -+ | SND_SOC_DAIFMT_NB_NF -+ | SND_SOC_DAIFMT_CBM_CFM, -+ .ops = &snd_rpi_proto_ops, -+}, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_rpi_proto = { -+ .name = "snd_rpi_proto", -+ .owner = THIS_MODULE, -+ .dai_link = snd_rpi_proto_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_proto_dai), -+}; -+ -+static int snd_rpi_proto_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ -+ snd_rpi_proto.dev = &pdev->dev; -+ -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai = &snd_rpi_proto_dai[0]; -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } -+ } -+ -+ ret = snd_soc_register_card(&snd_rpi_proto); -+ if (ret) { -+ dev_err(&pdev->dev, -+ "snd_soc_register_card() failed: %d\n", ret); -+ } -+ -+ return ret; -+} -+ -+ -+static int snd_rpi_proto_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&snd_rpi_proto); -+} -+ -+static const struct of_device_id snd_rpi_proto_of_match[] = { -+ { .compatible = "rpi,rpi-proto", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, snd_rpi_proto_of_match); -+ -+static struct platform_driver snd_rpi_proto_driver = { -+ .driver = { -+ .name = "snd-rpi-proto", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_rpi_proto_of_match, -+ }, -+ .probe = snd_rpi_proto_probe, -+ .remove = snd_rpi_proto_remove, -+}; -+ -+module_platform_driver(snd_rpi_proto_driver); -+ -+MODULE_AUTHOR("Florian Meier"); -+MODULE_DESCRIPTION("ASoC Driver for Raspberry Pi connected to PROTO board (WM8731)"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/brcm2708/patches-4.9/0076-RaspiDAC3-support.patch b/target/linux/brcm2708/patches-4.9/0076-RaspiDAC3-support.patch deleted file mode 100644 index de68bbf6b684..000000000000 --- a/target/linux/brcm2708/patches-4.9/0076-RaspiDAC3-support.patch +++ /dev/null @@ -1,238 +0,0 @@ -From b545537294ffc7e21fcc5e0c78ea8ac20c9ecd3f Mon Sep 17 00:00:00 2001 -From: Jan Grulich -Date: Mon, 24 Aug 2015 16:03:47 +0100 -Subject: [PATCH] RaspiDAC3 support - -Signed-off-by: Jan Grulich - -config: fix RaspiDAC Rev.3x dependencies - -Change depends to SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -like the other I2S soundcard drivers. - -Signed-off-by: Matthias Reichl ---- - sound/soc/bcm/Kconfig | 8 ++ - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/raspidac3.c | 186 ++++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 196 insertions(+) - create mode 100644 sound/soc/bcm/raspidac3.c - ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -65,3 +65,11 @@ config SND_BCM2708_SOC_IQAUDIO_DAC - select SND_SOC_PCM512x_I2C - help - Say Y or M if you want to add support for IQaudIO-DAC. -+ -+config SND_BCM2708_SOC_RASPIDAC3 -+ tristate "Support for RaspiDAC Rev.3x" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_PCM512x_I2C -+ select SND_SOC_TPA6130A2 -+ help -+ Say Y or M if you want to add support for RaspiDAC Rev.3x. ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -16,6 +16,7 @@ snd-soc-hifiberry-digi-objs := hifiberry - snd-soc-rpi-dac-objs := rpi-dac.o - snd-soc-rpi-proto-objs := rpi-proto.o - snd-soc-iqaudio-dac-objs := iqaudio-dac.o -+snd-soc-raspidac3-objs := raspidac3.o - - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o -@@ -24,3 +25,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_D - obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o - obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o -+obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o ---- /dev/null -+++ b/sound/soc/bcm/raspidac3.c -@@ -0,0 +1,186 @@ -+/* -+ * ASoC Driver for RaspiDAC v3 -+ * -+ * Author: Jan Grulich -+ * Copyright 2015 -+ * based on code by Daniel Matuschek -+ * based on code by Florian Meier -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "../codecs/pcm512x.h" -+#include "../codecs/tpa6130a2.h" -+ -+/* sound card init */ -+static int snd_rpi_raspidac3_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ int ret; -+ struct snd_soc_card *card = rtd->card; -+ struct snd_soc_codec *codec = rtd->codec; -+ snd_soc_update_bits(codec, PCM512x_GPIO_EN, 0x08, 0x08); -+ snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_4, 0xf, 0x02); -+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00); -+ -+ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); -+ if (ret < 0) -+ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); -+ else { -+ struct snd_kcontrol *kctl; -+ -+ ret = snd_soc_limit_volume(card, -+ "TPA6130A2 Headphone Playback Volume", -+ 54); -+ if (ret < 0) -+ dev_warn(card->dev, "Failed to set TPA6130A2 volume limit: %d\n", -+ ret); -+ kctl = snd_soc_card_get_kcontrol(card, -+ "TPA6130A2 Headphone Playback Volume"); -+ if (kctl) { -+ strcpy(kctl->id.name, "Headphones Playback Volume"); -+ /* disable the volume dB scale so alsamixer works */ -+ kctl->vd[0].access = SNDRV_CTL_ELEM_ACCESS_READWRITE; -+ } -+ -+ kctl = snd_soc_card_get_kcontrol(card, -+ "TPA6130A2 Headphone Playback Switch"); -+ if (kctl) -+ strcpy(kctl->id.name, "Headphones Playback Switch"); -+ } -+ -+ return 0; -+} -+ -+/* set hw parameters */ -+static int snd_rpi_raspidac3_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ -+ unsigned int sample_bits = -+ snd_pcm_format_physical_width(params_format(params)); -+ -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); -+} -+ -+/* startup */ -+static int snd_rpi_raspidac3_startup(struct snd_pcm_substream *substream) { -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_codec *codec = rtd->codec; -+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x08); -+ return 0; -+} -+ -+/* shutdown */ -+static void snd_rpi_raspidac3_shutdown(struct snd_pcm_substream *substream) { -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_codec *codec = rtd->codec; -+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00); -+} -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_rpi_raspidac3_ops = { -+ .hw_params = snd_rpi_raspidac3_hw_params, -+ .startup = snd_rpi_raspidac3_startup, -+ .shutdown = snd_rpi_raspidac3_shutdown, -+}; -+ -+/* interface setup */ -+static struct snd_soc_dai_link snd_rpi_raspidac3_dai[] = { -+{ -+ .name = "RaspiDAC Rev.3x", -+ .stream_name = "RaspiDAC HiFi", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "pcm512x-hifi", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "pcm512x.1-004c", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBS_CFS, -+ .ops = &snd_rpi_raspidac3_ops, -+ .init = snd_rpi_raspidac3_init, -+}, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_rpi_raspidac3 = { -+ .name = "RaspiDAC Rev.3x HiFi Audio Card", -+ .owner = THIS_MODULE, -+ .dai_link = snd_rpi_raspidac3_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_raspidac3_dai), -+}; -+ -+/* sound card test */ -+static int snd_rpi_raspidac3_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ -+ snd_rpi_raspidac3.dev = &pdev->dev; -+ -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai = &snd_rpi_raspidac3_dai[0]; -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } -+ } -+ -+ ret = snd_soc_register_card(&snd_rpi_raspidac3); -+ if (ret) -+ dev_err(&pdev->dev, -+ "snd_soc_register_card() failed: %d\n", ret); -+ -+ return ret; -+} -+ -+/* sound card disconnect */ -+static int snd_rpi_raspidac3_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&snd_rpi_raspidac3); -+} -+ -+static const struct of_device_id raspidac3_of_match[] = { -+ { .compatible = "jg,raspidacv3", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, raspidac3_of_match); -+ -+/* sound card platform driver */ -+static struct platform_driver snd_rpi_raspidac3_driver = { -+ .driver = { -+ .name = "snd-rpi-raspidac3", -+ .owner = THIS_MODULE, -+ .of_match_table = raspidac3_of_match, -+ }, -+ .probe = snd_rpi_raspidac3_probe, -+ .remove = snd_rpi_raspidac3_remove, -+}; -+ -+module_platform_driver(snd_rpi_raspidac3_driver); -+ -+MODULE_AUTHOR("Jan Grulich "); -+MODULE_DESCRIPTION("ASoC Driver for RaspiDAC Rev.3x"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/0077-Add-Support-for-JustBoom-Audio-boards.patch b/target/linux/brcm2708/patches-4.9/0077-Add-Support-for-JustBoom-Audio-boards.patch deleted file mode 100644 index 96545872f1eb..000000000000 --- a/target/linux/brcm2708/patches-4.9/0077-Add-Support-for-JustBoom-Audio-boards.patch +++ /dev/null @@ -1,446 +0,0 @@ -From 4a8ebf575ea143c14fd815ecd1f5398b6a6aee67 Mon Sep 17 00:00:00 2001 -From: Aaron Shaw -Date: Thu, 7 Apr 2016 21:26:21 +0100 -Subject: [PATCH] Add Support for JustBoom Audio boards - -justboom-dac: Adjust for ALSA API change - -As of 4.4, snd_soc_limit_volume now takes a struct snd_soc_card * -rather than a struct snd_soc_codec *. - -Signed-off-by: Phil Elwell ---- - sound/soc/bcm/Kconfig | 14 +++ - sound/soc/bcm/Makefile | 4 + - sound/soc/bcm/justboom-dac.c | 162 +++++++++++++++++++++++++++++++ - sound/soc/bcm/justboom-digi.c | 215 ++++++++++++++++++++++++++++++++++++++++++ - 4 files changed, 395 insertions(+) - create mode 100644 sound/soc/bcm/justboom-dac.c - create mode 100644 sound/soc/bcm/justboom-digi.c - ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -59,6 +59,20 @@ config SND_BCM2708_SOC_RPI_PROTO - help - Say Y or M if you want to add support for Audio Codec Board PROTO (WM8731). - -+config SND_BCM2708_SOC_JUSTBOOM_DAC -+ tristate "Support for JustBoom DAC" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_PCM512x -+ help -+ Say Y or M if you want to add support for JustBoom DAC. -+ -+config SND_BCM2708_SOC_JUSTBOOM_DIGI -+ tristate "Support for JustBoom Digi" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_WM8804 -+ help -+ Say Y or M if you want to add support for JustBoom Digi. -+ - config SND_BCM2708_SOC_IQAUDIO_DAC - tristate "Support for IQaudIO-DAC" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -13,6 +13,8 @@ snd-soc-hifiberry-amp-objs := hifiberry_ - snd-soc-hifiberry-dac-objs := hifiberry_dac.o - snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o - snd-soc-hifiberry-digi-objs := hifiberry_digi.o -+snd-soc-justboom-dac-objs := justboom-dac.o -+snd-soc-justboom-digi-objs := justboom-digi.o - snd-soc-rpi-dac-objs := rpi-dac.o - snd-soc-rpi-proto-objs := rpi-proto.o - snd-soc-iqaudio-dac-objs := iqaudio-dac.o -@@ -22,6 +24,8 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_A - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o -+obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o -+obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI) += snd-soc-justboom-digi.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o - obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o ---- /dev/null -+++ b/sound/soc/bcm/justboom-dac.c -@@ -0,0 +1,162 @@ -+/* -+ * ASoC Driver for JustBoom DAC Raspberry Pi HAT Sound Card -+ * -+ * Author: Milan Neskovic -+ * Copyright 2016 -+ * based on code by Daniel Matuschek -+ * based on code by Florian Meier -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "../codecs/pcm512x.h" -+ -+static bool digital_gain_0db_limit = true; -+ -+static int snd_rpi_justboom_dac_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ struct snd_soc_codec *codec = rtd->codec; -+ snd_soc_update_bits(codec, PCM512x_GPIO_EN, 0x08, 0x08); -+ snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_4, 0xf, 0x02); -+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x08); -+ -+ if (digital_gain_0db_limit) -+ { -+ int ret; -+ struct snd_soc_card *card = rtd->card; -+ -+ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); -+ if (ret < 0) -+ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); -+ } -+ -+ return 0; -+} -+ -+static int snd_rpi_justboom_dac_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ /*return snd_soc_dai_set_bclk_ratio(cpu_dai, 64);*/ -+ unsigned int sample_bits = -+ snd_pcm_format_physical_width(params_format(params)); -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); -+} -+ -+static int snd_rpi_justboom_dac_startup(struct snd_pcm_substream *substream) { -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_codec *codec = rtd->codec; -+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x08); -+ return 0; -+} -+ -+static void snd_rpi_justboom_dac_shutdown(struct snd_pcm_substream *substream) { -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_codec *codec = rtd->codec; -+ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00); -+} -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_rpi_justboom_dac_ops = { -+ .hw_params = snd_rpi_justboom_dac_hw_params, -+ .startup = snd_rpi_justboom_dac_startup, -+ .shutdown = snd_rpi_justboom_dac_shutdown, -+}; -+ -+static struct snd_soc_dai_link snd_rpi_justboom_dac_dai[] = { -+{ -+ .name = "JustBoom DAC", -+ .stream_name = "JustBoom DAC HiFi", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "pcm512x-hifi", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "pcm512x.1-004d", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBS_CFS, -+ .ops = &snd_rpi_justboom_dac_ops, -+ .init = snd_rpi_justboom_dac_init, -+}, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_rpi_justboom_dac = { -+ .name = "snd_rpi_justboom_dac", -+ .owner = THIS_MODULE, -+ .dai_link = snd_rpi_justboom_dac_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_justboom_dac_dai), -+}; -+ -+static int snd_rpi_justboom_dac_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ -+ snd_rpi_justboom_dac.dev = &pdev->dev; -+ -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai = &snd_rpi_justboom_dac_dai[0]; -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } -+ -+ digital_gain_0db_limit = !of_property_read_bool( -+ pdev->dev.of_node, "justboom,24db_digital_gain"); -+ } -+ -+ ret = snd_soc_register_card(&snd_rpi_justboom_dac); -+ if (ret) -+ dev_err(&pdev->dev, -+ "snd_soc_register_card() failed: %d\n", ret); -+ -+ return ret; -+} -+ -+static int snd_rpi_justboom_dac_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&snd_rpi_justboom_dac); -+} -+ -+static const struct of_device_id snd_rpi_justboom_dac_of_match[] = { -+ { .compatible = "justboom,justboom-dac", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, snd_rpi_justboom_dac_of_match); -+ -+static struct platform_driver snd_rpi_justboom_dac_driver = { -+ .driver = { -+ .name = "snd-rpi-justboom-dac", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_rpi_justboom_dac_of_match, -+ }, -+ .probe = snd_rpi_justboom_dac_probe, -+ .remove = snd_rpi_justboom_dac_remove, -+}; -+ -+module_platform_driver(snd_rpi_justboom_dac_driver); -+ -+MODULE_AUTHOR("Milan Neskovic "); -+MODULE_DESCRIPTION("ASoC Driver for JustBoom PI DAC HAT Sound Card"); -+MODULE_LICENSE("GPL v2"); ---- /dev/null -+++ b/sound/soc/bcm/justboom-digi.c -@@ -0,0 +1,215 @@ -+/* -+ * ASoC Driver for JustBoom Raspberry Pi Digi HAT Sound Card -+ * -+ * Author: Milan Neskovic -+ * Copyright 2016 -+ * based on code by Daniel Matuschek -+ * based on code by Florian Meier -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "../codecs/wm8804.h" -+ -+static int snd_rpi_justboom_digi_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ struct snd_soc_codec *codec = rtd->codec; -+ -+ /* enable TX output */ -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); -+ -+ return 0; -+} -+ -+static int snd_rpi_justboom_digi_startup(struct snd_pcm_substream *substream) { -+ /* turn on digital output */ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_codec *codec = rtd->codec; -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x00); -+ return 0; -+} -+ -+static void snd_rpi_justboom_digi_shutdown(struct snd_pcm_substream *substream) { -+ /* turn off output */ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_codec *codec = rtd->codec; -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x3c); -+} -+ -+static int snd_rpi_justboom_digi_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *codec_dai = rtd->codec_dai; -+ struct snd_soc_codec *codec = rtd->codec; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ -+ int sysclk = 27000000; /* This is fixed on this board */ -+ -+ long mclk_freq=0; -+ int mclk_div=1; -+ int sampling_freq=1; -+ -+ int ret; -+ -+ int samplerate = params_rate(params); -+ -+ if (samplerate<=96000) { -+ mclk_freq=samplerate*256; -+ mclk_div=WM8804_MCLKDIV_256FS; -+ } else { -+ mclk_freq=samplerate*128; -+ mclk_div=WM8804_MCLKDIV_128FS; -+ } -+ -+ switch (samplerate) { -+ case 32000: -+ sampling_freq=0x03; -+ break; -+ case 44100: -+ sampling_freq=0x00; -+ break; -+ case 48000: -+ sampling_freq=0x02; -+ break; -+ case 88200: -+ sampling_freq=0x08; -+ break; -+ case 96000: -+ sampling_freq=0x0a; -+ break; -+ case 176400: -+ sampling_freq=0x0c; -+ break; -+ case 192000: -+ sampling_freq=0x0e; -+ break; -+ default: -+ dev_err(codec->dev, -+ "Failed to set WM8804 SYSCLK, unsupported samplerate %d\n", -+ samplerate); -+ } -+ -+ snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div); -+ snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq); -+ -+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL, -+ sysclk, SND_SOC_CLOCK_OUT); -+ if (ret < 0) { -+ dev_err(codec->dev, -+ "Failed to set WM8804 SYSCLK: %d\n", ret); -+ return ret; -+ } -+ -+ /* Enable TX output */ -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); -+ -+ /* Power on */ -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x9, 0); -+ -+ /* set sampling frequency status bits */ -+ snd_soc_update_bits(codec, WM8804_SPDTX4, 0x0f, sampling_freq); -+ -+ return snd_soc_dai_set_bclk_ratio(cpu_dai,64); -+} -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_rpi_justboom_digi_ops = { -+ .hw_params = snd_rpi_justboom_digi_hw_params, -+ .startup = snd_rpi_justboom_digi_startup, -+ .shutdown = snd_rpi_justboom_digi_shutdown, -+}; -+ -+static struct snd_soc_dai_link snd_rpi_justboom_digi_dai[] = { -+{ -+ .name = "JustBoom Digi", -+ .stream_name = "JustBoom Digi HiFi", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "wm8804-spdif", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "wm8804.1-003b", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBM_CFM, -+ .ops = &snd_rpi_justboom_digi_ops, -+ .init = snd_rpi_justboom_digi_init, -+}, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_rpi_justboom_digi = { -+ .name = "snd_rpi_justboom_digi", -+ .owner = THIS_MODULE, -+ .dai_link = snd_rpi_justboom_digi_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_justboom_digi_dai), -+}; -+ -+static int snd_rpi_justboom_digi_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ -+ snd_rpi_justboom_digi.dev = &pdev->dev; -+ -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai = &snd_rpi_justboom_digi_dai[0]; -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } -+ } -+ -+ ret = snd_soc_register_card(&snd_rpi_justboom_digi); -+ if (ret) -+ dev_err(&pdev->dev, -+ "snd_soc_register_card() failed: %d\n", ret); -+ -+ return ret; -+} -+ -+static int snd_rpi_justboom_digi_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&snd_rpi_justboom_digi); -+} -+ -+static const struct of_device_id snd_rpi_justboom_digi_of_match[] = { -+ { .compatible = "justboom,justboom-digi", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, snd_rpi_justboom_digi_of_match); -+ -+static struct platform_driver snd_rpi_justboom_digi_driver = { -+ .driver = { -+ .name = "snd-rpi-justboom-digi", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_rpi_justboom_digi_of_match, -+ }, -+ .probe = snd_rpi_justboom_digi_probe, -+ .remove = snd_rpi_justboom_digi_remove, -+}; -+ -+module_platform_driver(snd_rpi_justboom_digi_driver); -+ -+MODULE_AUTHOR("Milan Neskovic "); -+MODULE_DESCRIPTION("ASoC Driver for JustBoom PI Digi HAT Sound Card"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/0078-ARM-adau1977-adc-Add-basic-machine-driver-for-adau19.patch b/target/linux/brcm2708/patches-4.9/0078-ARM-adau1977-adc-Add-basic-machine-driver-for-adau19.patch deleted file mode 100644 index 1b87b13efd96..000000000000 --- a/target/linux/brcm2708/patches-4.9/0078-ARM-adau1977-adc-Add-basic-machine-driver-for-adau19.patch +++ /dev/null @@ -1,177 +0,0 @@ -From 9bbd8a3c8378eac9e605e0f37f4005583e122527 Mon Sep 17 00:00:00 2001 -From: Andrey Grodzovsky -Date: Tue, 3 May 2016 22:10:59 -0400 -Subject: [PATCH] ARM: adau1977-adc: Add basic machine driver for adau1977 - codec driver. - -This commit adds basic support for the codec usage including: Device tree overlay, -binding I2S bus and setting I2S mode, clock source and frequency setting according -to spec. - -Signed-off-by: Andrey Grodzovsky ---- - sound/soc/bcm/Kconfig | 7 +++ - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/adau1977-adc.c | 125 +++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 134 insertions(+) - create mode 100644 sound/soc/bcm/adau1977-adc.c - ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -87,3 +87,10 @@ config SND_BCM2708_SOC_RASPIDAC3 - select SND_SOC_TPA6130A2 - help - Say Y or M if you want to add support for RaspiDAC Rev.3x. -+ -+config SND_BCM2708_SOC_ADAU1977_ADC -+ tristate "Support for ADAU1977 ADC" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_ADAU1977_I2C -+ help -+ Say Y or M if you want to add support for ADAU1977 ADC. ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -9,6 +9,7 @@ snd-soc-cygnus-objs := cygnus-pcm.o cygn - obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o - - # BCM2708 Machine Support -+snd-soc-adau1977-adc-objs := adau1977-adc.o - snd-soc-hifiberry-amp-objs := hifiberry_amp.o - snd-soc-hifiberry-dac-objs := hifiberry_dac.o - snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o -@@ -20,6 +21,7 @@ snd-soc-rpi-proto-objs := rpi-proto.o - snd-soc-iqaudio-dac-objs := iqaudio-dac.o - snd-soc-raspidac3-objs := raspidac3.o - -+obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o ---- /dev/null -+++ b/sound/soc/bcm/adau1977-adc.c -@@ -0,0 +1,125 @@ -+/* -+ * ASoC Driver for ADAU1977 ADC -+ * -+ * Author: Andrey Grodzovsky -+ * Copyright 2016 -+ * -+ * This file is based on hifibery_dac driver by Florian Meier. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+enum adau1977_clk_id { -+ ADAU1977_SYSCLK, -+}; -+ -+enum adau1977_sysclk_src { -+ ADAU1977_SYSCLK_SRC_MCLK, -+ ADAU1977_SYSCLK_SRC_LRCLK, -+}; -+ -+static int eval_adau1977_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ int ret; -+ struct snd_soc_dai *codec_dai = rtd->codec_dai; -+ -+ ret = snd_soc_dai_set_tdm_slot(codec_dai, 0, 0, 0, 0); -+ if (ret < 0) -+ return ret; -+ -+ return snd_soc_codec_set_sysclk(rtd->codec, ADAU1977_SYSCLK, -+ ADAU1977_SYSCLK_SRC_MCLK, 11289600, SND_SOC_CLOCK_IN); -+} -+ -+static struct snd_soc_dai_link snd_rpi_adau1977_dai[] = { -+ { -+ .name = "adau1977", -+ .stream_name = "ADAU1977", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "adau1977-hifi", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "adau1977.1-0011", -+ .init = eval_adau1977_init, -+ .dai_fmt = SND_SOC_DAIFMT_I2S | -+ SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBM_CFM, -+ }, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_adau1977_adc = { -+ .name = "snd_rpi_adau1977_adc", -+ .owner = THIS_MODULE, -+ .dai_link = snd_rpi_adau1977_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_adau1977_dai), -+}; -+ -+static int snd_adau1977_adc_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ -+ snd_adau1977_adc.dev = &pdev->dev; -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai = &snd_rpi_adau1977_dai[0]; -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } -+ } -+ -+ ret = snd_soc_register_card(&snd_adau1977_adc); -+ if (ret) -+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); -+ -+ return ret; -+} -+ -+static int snd_adau1977_adc_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&snd_adau1977_adc); -+} -+ -+static const struct of_device_id snd_adau1977_adc_of_match[] = { -+ { .compatible = "adi,adau1977-adc", }, -+ {}, -+}; -+ -+MODULE_DEVICE_TABLE(of, snd_adau1977_adc_of_match); -+ -+static struct platform_driver snd_adau1977_adc_driver = { -+ .driver = { -+ .name = "snd-adau1977-adc", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_adau1977_adc_of_match, -+ }, -+ .probe = snd_adau1977_adc_probe, -+ .remove = snd_adau1977_adc_remove, -+}; -+ -+module_platform_driver(snd_adau1977_adc_driver); -+ -+MODULE_AUTHOR("Andrey Grodzovsky "); -+MODULE_DESCRIPTION("ASoC Driver for ADAU1977 ADC"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/0079-New-AudioInjector.net-Pi-soundcard-with-low-jitter-a.patch b/target/linux/brcm2708/patches-4.9/0079-New-AudioInjector.net-Pi-soundcard-with-low-jitter-a.patch deleted file mode 100644 index 71d4fef697f3..000000000000 --- a/target/linux/brcm2708/patches-4.9/0079-New-AudioInjector.net-Pi-soundcard-with-low-jitter-a.patch +++ /dev/null @@ -1,246 +0,0 @@ -From 235989cb582a29be0bea6a7e306f7b839789053c Mon Sep 17 00:00:00 2001 -From: Matt Flax -Date: Mon, 16 May 2016 21:36:31 +1000 -Subject: [PATCH] New AudioInjector.net Pi soundcard with low jitter audio in - and out. - -Contains the sound/soc/bcm ALSA machine driver and necessary alterations to the Kconfig and Makefile. -Adds the dts overlay and updates the Makefile and README. -Updates the relevant defconfig files to enable building for the Raspberry Pi. -Thanks to Phil Elwell (pelwell) for the review, simple-card concepts and discussion. Thanks to Clive Messer for overlay naming suggestions. - -Added support for headphones, microphone and bclk_ratio settings. - -This patch adds headphone and microphone capability to the Audio Injector sound card. The patch also sets the bit clock ratio for use in the bcm2835-i2s driver. The bcm2835-i2s can't handle an 8 kHz sample rate when the bit clock is at 12 MHz because its register is only 10 bits wide which can't represent the ch2 offset of 1508. For that reason, the rate constraint is added. ---- - sound/soc/bcm/Kconfig | 7 ++ - sound/soc/bcm/Makefile | 3 + - sound/soc/bcm/audioinjector-pi-soundcard.c | 193 +++++++++++++++++++++++++++++ - 3 files changed, 203 insertions(+) - create mode 100644 sound/soc/bcm/audioinjector-pi-soundcard.c - ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -94,3 +94,10 @@ config SND_BCM2708_SOC_ADAU1977_ADC - select SND_SOC_ADAU1977_I2C - help - Say Y or M if you want to add support for ADAU1977 ADC. -+ -+config SND_AUDIOINJECTOR_PI_SOUNDCARD -+ tristate "Support for audioinjector.net Pi add on soundcard" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_WM8731 -+ help -+ Say Y or M if you want to add support for audioinjector.net Pi Hat ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -20,6 +20,7 @@ snd-soc-rpi-dac-objs := rpi-dac.o - snd-soc-rpi-proto-objs := rpi-proto.o - snd-soc-iqaudio-dac-objs := iqaudio-dac.o - snd-soc-raspidac3-objs := raspidac3.o -+snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o - - obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o -@@ -32,3 +33,5 @@ obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += - obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o - obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o - obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o -+obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o -+ ---- /dev/null -+++ b/sound/soc/bcm/audioinjector-pi-soundcard.c -@@ -0,0 +1,193 @@ -+/* -+ * ASoC Driver for AudioInjector Pi add on soundcard -+ * -+ * Created on: 13-May-2016 -+ * Author: flatmax@flatmax.org -+ * based on code by Cliff Cai for the ssm2602 machine blackfin. -+ * with help from Lars-Peter Clausen for simplifying the original code to use the dai_fmt field. -+ * i2s_node code taken from the other sound/soc/bcm machine drivers. -+ * -+ * Copyright (C) 2016 Flatmax Pty. Ltd. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "../codecs/wm8731.h" -+ -+static const unsigned int bcm2835_rates_12000000[] = { -+ 8000, 16000, 32000, 44100, 48000, 96000, 88200, -+}; -+ -+static struct snd_pcm_hw_constraint_list bcm2835_constraints_12000000 = { -+ .list = bcm2835_rates_12000000, -+ .count = ARRAY_SIZE(bcm2835_rates_12000000), -+}; -+ -+static int snd_audioinjector_pi_soundcard_startup(struct snd_pcm_substream *substream) -+{ -+ /* Setup constraints, because there is a 12 MHz XTAL on the board */ -+ snd_pcm_hw_constraint_list(substream->runtime, 0, -+ SNDRV_PCM_HW_PARAM_RATE, -+ &bcm2835_constraints_12000000); -+ return 0; -+} -+ -+static int snd_audioinjector_pi_soundcard_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ -+ switch (params_rate(params)){ -+ case 8000: -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 1); -+ case 16000: -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 750); -+ case 32000: -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 375); -+ case 44100: -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 272); -+ case 48000: -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 250); -+ case 88200: -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 136); -+ case 96000: -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 125); -+ default: -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 125); -+ } -+} -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_audioinjector_pi_soundcard_ops = { -+ .startup = snd_audioinjector_pi_soundcard_startup, -+ .hw_params = snd_audioinjector_pi_soundcard_hw_params, -+}; -+ -+static int audioinjector_pi_soundcard_dai_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ return snd_soc_dai_set_sysclk(rtd->codec_dai, WM8731_SYSCLK_XTAL, 12000000, SND_SOC_CLOCK_IN); -+} -+ -+static struct snd_soc_dai_link audioinjector_pi_soundcard_dai[] = { -+ { -+ .name = "AudioInjector audio", -+ .stream_name = "AudioInjector audio", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "wm8731-hifi", -+ .platform_name = "bcm2835-i2s.0", -+ .codec_name = "wm8731.1-001a", -+ .ops = &snd_audioinjector_pi_soundcard_ops, -+ .init = audioinjector_pi_soundcard_dai_init, -+ .dai_fmt = SND_SOC_DAIFMT_CBM_CFM|SND_SOC_DAIFMT_I2S|SND_SOC_DAIFMT_NB_NF, -+ }, -+}; -+ -+static const struct snd_soc_dapm_widget wm8731_dapm_widgets[] = { -+ SND_SOC_DAPM_HP("Headphone Jack", NULL), -+ SND_SOC_DAPM_SPK("Ext Spk", NULL), -+ SND_SOC_DAPM_LINE("Line In Jacks", NULL), -+ SND_SOC_DAPM_MIC("Microphone", NULL), -+}; -+ -+static const struct snd_soc_dapm_route audioinjector_audio_map[] = { -+ /* headphone connected to LHPOUT, RHPOUT */ -+ {"Headphone Jack", NULL, "LHPOUT"}, -+ {"Headphone Jack", NULL, "RHPOUT"}, -+ -+ /* speaker connected to LOUT, ROUT */ -+ {"Ext Spk", NULL, "ROUT"}, -+ {"Ext Spk", NULL, "LOUT"}, -+ -+ /* line inputs */ -+ {"Line In Jacks", NULL, "Line Input"}, -+ -+ /* mic is connected to Mic Jack, with WM8731 Mic Bias */ -+ {"Microphone", NULL, "Mic Bias"}, -+}; -+ -+static struct snd_soc_card snd_soc_audioinjector = { -+ .name = "audioinjector-pi-soundcard", -+ .dai_link = audioinjector_pi_soundcard_dai, -+ .num_links = ARRAY_SIZE(audioinjector_pi_soundcard_dai), -+ -+ .dapm_widgets = wm8731_dapm_widgets, -+ .num_dapm_widgets = ARRAY_SIZE(wm8731_dapm_widgets), -+ .dapm_routes = audioinjector_audio_map, -+ .num_dapm_routes = ARRAY_SIZE(audioinjector_audio_map), -+}; -+ -+static int audioinjector_pi_soundcard_probe(struct platform_device *pdev) -+{ -+ struct snd_soc_card *card = &snd_soc_audioinjector; -+ int ret; -+ -+ card->dev = &pdev->dev; -+ -+ if (pdev->dev.of_node) { -+ struct snd_soc_dai_link *dai = &audioinjector_pi_soundcard_dai[0]; -+ struct device_node *i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } else -+ if (!dai->cpu_of_node) { -+ dev_err(&pdev->dev, "Property 'i2s-controller' missing or invalid\n"); -+ return -EINVAL; -+ } -+ } -+ -+ if ((ret = snd_soc_register_card(card))) { -+ dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret); -+ } -+ return ret; -+} -+ -+static int audioinjector_pi_soundcard_remove(struct platform_device *pdev) -+{ -+ struct snd_soc_card *card = platform_get_drvdata(pdev); -+ return snd_soc_unregister_card(card); -+ -+} -+ -+static const struct of_device_id audioinjector_pi_soundcard_of_match[] = { -+ { .compatible = "ai,audioinjector-pi-soundcard", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, audioinjector_pi_soundcard_of_match); -+ -+static struct platform_driver audioinjector_pi_soundcard_driver = { -+ .driver = { -+ .name = "audioinjector-audio", -+ .owner = THIS_MODULE, -+ .of_match_table = audioinjector_pi_soundcard_of_match, -+ }, -+ .probe = audioinjector_pi_soundcard_probe, -+ .remove = audioinjector_pi_soundcard_remove, -+}; -+ -+module_platform_driver(audioinjector_pi_soundcard_driver); -+MODULE_AUTHOR("Matt Flax "); -+MODULE_DESCRIPTION("AudioInjector.net Pi Soundcard"); -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:audioinjector-pi-soundcard"); -+ diff --git a/target/linux/brcm2708/patches-4.9/0080-Add-IQAudIO-Digi-WM8804-board-support.patch b/target/linux/brcm2708/patches-4.9/0080-Add-IQAudIO-Digi-WM8804-board-support.patch deleted file mode 100644 index f6a23f91f4bf..000000000000 --- a/target/linux/brcm2708/patches-4.9/0080-Add-IQAudIO-Digi-WM8804-board-support.patch +++ /dev/null @@ -1,295 +0,0 @@ -From 5d70e6012f390d6292ea8017cebb947a003fce00 Mon Sep 17 00:00:00 2001 -From: DigitalDreamtime -Date: Thu, 30 Jun 2016 18:38:42 +0100 -Subject: [PATCH] Add IQAudIO Digi WM8804 board support - -Support IQAudIO Digi board with iqaudio_digi machine driver and - iqaudio-digi-wm8804-audio overlay. - -NB. Machine driver is a cut and paste of hifiberry_digi code, with format - and general cleanup to comply with kernel coding standards. - -Signed-off-by: DigitalDreamtime ---- - sound/soc/bcm/Kconfig | 7 ++ - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/iqaudio_digi.c | 239 +++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 248 insertions(+) - create mode 100644 sound/soc/bcm/iqaudio_digi.c - ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -80,6 +80,13 @@ config SND_BCM2708_SOC_IQAUDIO_DAC - help - Say Y or M if you want to add support for IQaudIO-DAC. - -+config SND_BCM2708_SOC_IQAUDIO_DIGI -+ tristate "Support for IQAudIO Digi" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_WM8804 -+ help -+ Say Y or M if you want to add support for IQAudIO Digital IO board. -+ - config SND_BCM2708_SOC_RASPIDAC3 - tristate "Support for RaspiDAC Rev.3x" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -19,6 +19,7 @@ snd-soc-justboom-digi-objs := justboom-d - snd-soc-rpi-dac-objs := rpi-dac.o - snd-soc-rpi-proto-objs := rpi-proto.o - snd-soc-iqaudio-dac-objs := iqaudio-dac.o -+snd-soc-iqaudio-digi-objs := iqaudio_digi.o - snd-soc-raspidac3-objs := raspidac3.o - snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o - -@@ -32,6 +33,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DI - obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o - obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o -+obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI) += snd-soc-iqaudio-digi.o - obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o - obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o - ---- /dev/null -+++ b/sound/soc/bcm/iqaudio_digi.c -@@ -0,0 +1,239 @@ -+/* -+ * ASoC Driver for IQAudIO WM8804 Digi -+ * -+ * Author: Daniel Matuschek -+ * based on the HifiBerry DAC driver by Florian Meier -+ * Copyright 2013 -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "../codecs/wm8804.h" -+ -+static short int auto_shutdown_output; -+module_param(auto_shutdown_output, short, -+ S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP); -+MODULE_PARM_DESC(auto_shutdown_output, "Shutdown SP/DIF output if playback is stopped"); -+ -+static int snd_rpi_iqaudio_digi_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ struct snd_soc_codec *codec = rtd->codec; -+ -+ /* enable TX output */ -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); -+ -+ return 0; -+} -+ -+static int snd_rpi_iqaudio_digi_startup(struct snd_pcm_substream *substream) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_codec *codec = rtd->codec; -+ -+ /* turn on digital output */ -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x00); -+ -+ return 0; -+} -+ -+static void snd_rpi_iqaudio_digi_shutdown(struct snd_pcm_substream *substream) -+{ -+ if (auto_shutdown_output) { -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_codec *codec = rtd->codec; -+ -+ /* turn off digital output */ -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x3c); -+ } -+} -+ -+ -+static int snd_rpi_iqaudio_digi_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *codec_dai = rtd->codec_dai; -+ struct snd_soc_codec *codec = rtd->codec; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ -+ int sysclk = 27000000; /* This is fixed on this board */ -+ -+ long mclk_freq = 0; -+ int mclk_div = 1; -+ int sampling_freq = 1; -+ -+ int ret; -+ -+ int samplerate = params_rate(params); -+ -+ if (samplerate <= 96000) { -+ mclk_freq = samplerate * 256; -+ mclk_div = WM8804_MCLKDIV_256FS; -+ } else { -+ mclk_freq = samplerate * 128; -+ mclk_div = WM8804_MCLKDIV_128FS; -+ } -+ -+ switch (samplerate) { -+ case 32000: -+ sampling_freq = 0x03; -+ break; -+ case 44100: -+ sampling_freq = 0x00; -+ break; -+ case 48000: -+ sampling_freq = 0x02; -+ break; -+ case 88200: -+ sampling_freq = 0x08; -+ break; -+ case 96000: -+ sampling_freq = 0x0a; -+ break; -+ case 176400: -+ sampling_freq = 0x0c; -+ break; -+ case 192000: -+ sampling_freq = 0x0e; -+ break; -+ default: -+ dev_err(codec->dev, "Failed to set WM8804 SYSCLK, unsupported samplerate %d\n", -+ samplerate); -+ } -+ -+ snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div); -+ snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq); -+ -+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL, -+ sysclk, SND_SOC_CLOCK_OUT); -+ if (ret < 0) { -+ dev_err(codec->dev, "Failed to set WM8804 SYSCLK: %d\n", ret); -+ return ret; -+ } -+ -+ /* Enable TX output */ -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); -+ -+ /* Power on */ -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x9, 0); -+ -+ /* set sampling frequency status bits */ -+ snd_soc_update_bits(codec, WM8804_SPDTX4, 0x0f, sampling_freq); -+ -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 64); -+} -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_rpi_iqaudio_digi_ops = { -+ .hw_params = snd_rpi_iqaudio_digi_hw_params, -+ .startup = snd_rpi_iqaudio_digi_startup, -+ .shutdown = snd_rpi_iqaudio_digi_shutdown, -+}; -+ -+static struct snd_soc_dai_link snd_rpi_iqaudio_digi_dai[] = { -+{ -+ .name = "IQAudIO Digi", -+ .stream_name = "IQAudIO Digi HiFi", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "wm8804-spdif", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "wm8804.1-003b", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | -+ SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBM_CFM, -+ .ops = &snd_rpi_iqaudio_digi_ops, -+ .init = snd_rpi_iqaudio_digi_init, -+}, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_rpi_iqaudio_digi = { -+ .name = "IQAudIODigi", -+ .owner = THIS_MODULE, -+ .dai_link = snd_rpi_iqaudio_digi_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_iqaudio_digi_dai), -+}; -+ -+static int snd_rpi_iqaudio_digi_probe(struct platform_device *pdev) -+{ -+ struct snd_soc_card *card = &snd_rpi_iqaudio_digi; -+ char *prefix = "wm8804-digi,"; -+ char prop[128]; -+ struct device_node *np; -+ int ret = 0; -+ -+ snd_rpi_iqaudio_digi.dev = &pdev->dev; -+ -+ np = pdev->dev.of_node; -+ if (np) { -+ struct snd_soc_dai_link *dai = &snd_rpi_iqaudio_digi_dai[0]; -+ struct device_node *i2s_node; -+ -+ i2s_node = of_parse_phandle(np, "i2s-controller", 0); -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } -+ -+ snprintf(prop, sizeof(prop), "%scard-name", prefix); -+ of_property_read_string(np, prop, &card->name); -+ -+ snprintf(prop, sizeof(prop), "%sdai-name", prefix); -+ of_property_read_string(np, prop, &dai->name); -+ -+ snprintf(prop, sizeof(prop), "%sdai-stream-name", prefix); -+ of_property_read_string(np, prop, &dai->stream_name); -+ } -+ -+ ret = snd_soc_register_card(card); -+ if (ret) -+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", -+ ret); -+ -+ return ret; -+} -+ -+static int snd_rpi_iqaudio_digi_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&snd_rpi_iqaudio_digi); -+} -+ -+static const struct of_device_id snd_rpi_iqaudio_digi_of_match[] = { -+ { .compatible = "iqaudio,wm8804-digi", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, snd_rpi_iqaudio_digi_of_match); -+ -+static struct platform_driver snd_rpi_iqaudio_digi_driver = { -+ .driver = { -+ .name = "IQAudIODigi", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_rpi_iqaudio_digi_of_match, -+ }, -+ .probe = snd_rpi_iqaudio_digi_probe, -+ .remove = snd_rpi_iqaudio_digi_remove, -+}; -+ -+module_platform_driver(snd_rpi_iqaudio_digi_driver); -+ -+MODULE_AUTHOR("Daniel Matuschek "); -+MODULE_DESCRIPTION("ASoC Driver for IQAudIO WM8804 Digi"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/0081-New-driver-for-RRA-DigiDAC1-soundcard-using-WM8741-W.patch b/target/linux/brcm2708/patches-4.9/0081-New-driver-for-RRA-DigiDAC1-soundcard-using-WM8741-W.patch deleted file mode 100644 index 45a5a379be2b..000000000000 --- a/target/linux/brcm2708/patches-4.9/0081-New-driver-for-RRA-DigiDAC1-soundcard-using-WM8741-W.patch +++ /dev/null @@ -1,467 +0,0 @@ -From e5d85d533e7ea8fd5c68d4601ff2b8034bc4aaa9 Mon Sep 17 00:00:00 2001 -From: escalator2015 -Date: Tue, 24 May 2016 16:20:09 +0100 -Subject: [PATCH] New driver for RRA DigiDAC1 soundcard using WM8741 + WM8804 - ---- - sound/soc/bcm/Kconfig | 8 + - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/digidac1-soundcard.c | 422 +++++++++++++++++++++++++++++++++++++ - 3 files changed, 432 insertions(+) - create mode 100644 sound/soc/bcm/digidac1-soundcard.c - ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -108,3 +108,11 @@ config SND_AUDIOINJECTOR_PI_SOUNDCARD - select SND_SOC_WM8731 - help - Say Y or M if you want to add support for audioinjector.net Pi Hat -+ -+config SND_DIGIDAC1_SOUNDCARD -+ tristate "Support for Red Rocks Audio DigiDAC1" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_WM8804 -+ select SND_SOC_WM8741 -+ help -+ Say Y or M if you want to add support for Red Rocks Audio DigiDAC1 board. ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -22,6 +22,7 @@ snd-soc-iqaudio-dac-objs := iqaudio-dac. - snd-soc-iqaudio-digi-objs := iqaudio_digi.o - snd-soc-raspidac3-objs := raspidac3.o - snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o -+snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o - - obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o -@@ -36,4 +37,5 @@ obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC - obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI) += snd-soc-iqaudio-digi.o - obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o - obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o -+obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o - ---- /dev/null -+++ b/sound/soc/bcm/digidac1-soundcard.c -@@ -0,0 +1,422 @@ -+/* -+ * ASoC Driver for RRA DigiDAC1 -+ * Copyright 2016 -+ * Author: José M. Tasende -+ * based on the HifiBerry DAC driver by Florian Meier -+ * and the Wolfson card driver by Nikesh Oswal, -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "../codecs/wm8804.h" -+#include "../codecs/wm8741.h" -+ -+#define WM8741_NUM_SUPPLIES 2 -+ -+/* codec private data */ -+struct wm8741_priv { -+ struct wm8741_platform_data pdata; -+ struct regmap *regmap; -+ struct regulator_bulk_data supplies[WM8741_NUM_SUPPLIES]; -+ unsigned int sysclk; -+ const struct snd_pcm_hw_constraint_list *sysclk_constraints; -+}; -+ -+static int samplerate = 44100; -+ -+/* New Alsa Controls not exposed by original wm8741 codec driver */ -+/* in actual driver the att. adjustment is wrong because */ -+/* this DAC has a coarse attenuation register with 4dB steps */ -+/* and a fine level register with 0.125dB steps */ -+/* each register has 32 steps so combining both we have 1024 steps */ -+/* of 0.125 dB. */ -+/* The original level controls from driver are removed at startup */ -+/* and replaced by the corrected ones. */ -+/* The same wm8741 driver can be used for wm8741 and wm8742 devices */ -+ -+static const DECLARE_TLV_DB_SCALE(dac_tlv_fine, 0, 13, 0); -+static const DECLARE_TLV_DB_SCALE(dac_tlv_coarse, -12700, 400, 1); -+static const char *w8741_dither[4] = {"Off", "RPDF", "TPDF", "HPDF"}; -+static const char *w8741_filter[5] = { -+ "Type 1", "Type 2", "Type 3", "Type 4", "Type 5"}; -+static const char *w8741_switch[2] = {"Off", "On"}; -+static const struct soc_enum w8741_enum[] = { -+SOC_ENUM_SINGLE(WM8741_MODE_CONTROL_2, 0, 4, w8741_dither),/* dithering type */ -+SOC_ENUM_SINGLE(WM8741_FILTER_CONTROL, 0, 5, w8741_filter),/* filter type */ -+SOC_ENUM_SINGLE(WM8741_FORMAT_CONTROL, 6, 2, w8741_switch),/* phase invert */ -+SOC_ENUM_SINGLE(WM8741_VOLUME_CONTROL, 0, 2, w8741_switch),/* volume ramp */ -+SOC_ENUM_SINGLE(WM8741_VOLUME_CONTROL, 3, 2, w8741_switch),/* soft mute */ -+}; -+ -+static const struct snd_kcontrol_new w8741_snd_controls_stereo[] = { -+SOC_DOUBLE_R_TLV("DAC Fine Playback Volume", WM8741_DACLLSB_ATTENUATION, -+ WM8741_DACRLSB_ATTENUATION, 0, 31, 1, dac_tlv_fine), -+SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8741_DACLMSB_ATTENUATION, -+ WM8741_DACRMSB_ATTENUATION, 0, 31, 1, dac_tlv_coarse), -+SOC_ENUM("DAC Dither", w8741_enum[0]), -+SOC_ENUM("DAC Digital Filter", w8741_enum[1]), -+SOC_ENUM("DAC Phase Invert", w8741_enum[2]), -+SOC_ENUM("DAC Volume Ramp", w8741_enum[3]), -+SOC_ENUM("DAC Soft Mute", w8741_enum[4]), -+}; -+ -+static const struct snd_kcontrol_new w8741_snd_controls_mono_left[] = { -+SOC_SINGLE_TLV("DAC Fine Playback Volume", WM8741_DACLLSB_ATTENUATION, -+ 0, 31, 0, dac_tlv_fine), -+SOC_SINGLE_TLV("Digital Playback Volume", WM8741_DACLMSB_ATTENUATION, -+ 0, 31, 1, dac_tlv_coarse), -+SOC_ENUM("DAC Dither", w8741_enum[0]), -+SOC_ENUM("DAC Digital Filter", w8741_enum[1]), -+SOC_ENUM("DAC Phase Invert", w8741_enum[2]), -+SOC_ENUM("DAC Volume Ramp", w8741_enum[3]), -+SOC_ENUM("DAC Soft Mute", w8741_enum[4]), -+}; -+ -+static const struct snd_kcontrol_new w8741_snd_controls_mono_right[] = { -+SOC_SINGLE_TLV("DAC Fine Playback Volume", WM8741_DACRLSB_ATTENUATION, -+ 0, 31, 0, dac_tlv_fine), -+SOC_SINGLE_TLV("Digital Playback Volume", WM8741_DACRMSB_ATTENUATION, -+ 0, 31, 1, dac_tlv_coarse), -+SOC_ENUM("DAC Dither", w8741_enum[0]), -+SOC_ENUM("DAC Digital Filter", w8741_enum[1]), -+SOC_ENUM("DAC Phase Invert", w8741_enum[2]), -+SOC_ENUM("DAC Volume Ramp", w8741_enum[3]), -+SOC_ENUM("DAC Soft Mute", w8741_enum[4]), -+}; -+ -+static int w8741_add_controls(struct snd_soc_codec *codec) -+{ -+ struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec); -+ -+ switch (wm8741->pdata.diff_mode) { -+ case WM8741_DIFF_MODE_STEREO: -+ case WM8741_DIFF_MODE_STEREO_REVERSED: -+ snd_soc_add_codec_controls(codec, -+ w8741_snd_controls_stereo, -+ ARRAY_SIZE(w8741_snd_controls_stereo)); -+ break; -+ case WM8741_DIFF_MODE_MONO_LEFT: -+ snd_soc_add_codec_controls(codec, -+ w8741_snd_controls_mono_left, -+ ARRAY_SIZE(w8741_snd_controls_mono_left)); -+ break; -+ case WM8741_DIFF_MODE_MONO_RIGHT: -+ snd_soc_add_codec_controls(codec, -+ w8741_snd_controls_mono_right, -+ ARRAY_SIZE(w8741_snd_controls_mono_right)); -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static int digidac1_soundcard_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ struct snd_soc_codec *codec = rtd->codec; -+ struct snd_soc_card *card = rtd->card; -+ struct snd_soc_pcm_runtime *wm8741_rtd; -+ struct snd_soc_codec *wm8741_codec; -+ struct snd_card *sound_card = card->snd_card; -+ struct snd_kcontrol *kctl; -+ int ret; -+ -+ wm8741_rtd = snd_soc_get_pcm_runtime(card, card->dai_link[1].name); -+ if (!wm8741_rtd) { -+ dev_warn(card->dev, "digidac1_soundcard_init: couldn't get wm8741 rtd\n"); -+ return -EFAULT; -+ } -+ wm8741_codec = wm8741_rtd->codec; -+ ret = w8741_add_controls(wm8741_codec); -+ if (ret < 0) -+ dev_warn(card->dev, "Failed to add new wm8741 controls: %d\n", -+ ret); -+ -+ /* enable TX output */ -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); -+ -+ kctl = snd_soc_card_get_kcontrol(card, -+ "Playback Volume"); -+ if (kctl) { -+ kctl->vd[0].access = SNDRV_CTL_ELEM_ACCESS_READWRITE; -+ snd_ctl_remove(sound_card, kctl); -+ } -+ kctl = snd_soc_card_get_kcontrol(card, -+ "Fine Playback Volume"); -+ if (kctl) { -+ kctl->vd[0].access = SNDRV_CTL_ELEM_ACCESS_READWRITE; -+ snd_ctl_remove(sound_card, kctl); -+ } -+ return 0; -+} -+ -+static int digidac1_soundcard_startup(struct snd_pcm_substream *substream) -+{ -+ /* turn on wm8804 digital output */ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_codec *codec = rtd->codec; -+ struct snd_soc_card *card = rtd->card; -+ struct snd_soc_pcm_runtime *wm8741_rtd; -+ struct snd_soc_codec *wm8741_codec; -+ -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x00); -+ wm8741_rtd = snd_soc_get_pcm_runtime(card, card->dai_link[1].name); -+ if (!wm8741_rtd) { -+ dev_warn(card->dev, "digidac1_soundcard_startup: couldn't get WM8741 rtd\n"); -+ return -EFAULT; -+ } -+ wm8741_codec = wm8741_rtd->codec; -+ -+ /* latch wm8741 level */ -+ snd_soc_update_bits(wm8741_codec, WM8741_DACLLSB_ATTENUATION, -+ WM8741_UPDATELL, WM8741_UPDATELL); -+ snd_soc_update_bits(wm8741_codec, WM8741_DACLMSB_ATTENUATION, -+ WM8741_UPDATELM, WM8741_UPDATELM); -+ snd_soc_update_bits(wm8741_codec, WM8741_DACRLSB_ATTENUATION, -+ WM8741_UPDATERL, WM8741_UPDATERL); -+ snd_soc_update_bits(wm8741_codec, WM8741_DACRMSB_ATTENUATION, -+ WM8741_UPDATERM, WM8741_UPDATERM); -+ -+ return 0; -+} -+ -+static void digidac1_soundcard_shutdown(struct snd_pcm_substream *substream) -+{ -+ /* turn off wm8804 digital output */ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_codec *codec = rtd->codec; -+ -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x3c); -+} -+ -+static int digidac1_soundcard_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *codec_dai = rtd->codec_dai; -+ struct snd_soc_codec *codec = rtd->codec; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ struct snd_soc_card *card = rtd->card; -+ struct snd_soc_pcm_runtime *wm8741_rtd; -+ struct snd_soc_codec *wm8741_codec; -+ -+ int sysclk = 27000000; -+ long mclk_freq = 0; -+ int mclk_div = 1; -+ int sampling_freq = 1; -+ int ret; -+ -+ wm8741_rtd = snd_soc_get_pcm_runtime(card, card->dai_link[1].name); -+ if (!wm8741_rtd) { -+ dev_warn(card->dev, "digidac1_soundcard_hw_params: couldn't get WM8741 rtd\n"); -+ return -EFAULT; -+ } -+ wm8741_codec = wm8741_rtd->codec; -+ samplerate = params_rate(params); -+ -+ if (samplerate <= 96000) { -+ mclk_freq = samplerate*256; -+ mclk_div = WM8804_MCLKDIV_256FS; -+ } else { -+ mclk_freq = samplerate*128; -+ mclk_div = WM8804_MCLKDIV_128FS; -+ } -+ -+ switch (samplerate) { -+ case 32000: -+ sampling_freq = 0x03; -+ break; -+ case 44100: -+ sampling_freq = 0x00; -+ break; -+ case 48000: -+ sampling_freq = 0x02; -+ break; -+ case 88200: -+ sampling_freq = 0x08; -+ break; -+ case 96000: -+ sampling_freq = 0x0a; -+ break; -+ case 176400: -+ sampling_freq = 0x0c; -+ break; -+ case 192000: -+ sampling_freq = 0x0e; -+ break; -+ default: -+ dev_err(codec->dev, -+ "Failed to set WM8804 SYSCLK, unsupported samplerate %d\n", -+ samplerate); -+ } -+ -+ snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div); -+ snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq); -+ -+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL, -+ sysclk, SND_SOC_CLOCK_OUT); -+ if (ret < 0) { -+ dev_err(codec->dev, -+ "Failed to set WM8804 SYSCLK: %d\n", ret); -+ return ret; -+ } -+ /* Enable wm8804 TX output */ -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); -+ -+ /* wm8804 Power on */ -+ snd_soc_update_bits(codec, WM8804_PWRDN, 0x9, 0); -+ -+ /* wm8804 set sampling frequency status bits */ -+ snd_soc_update_bits(codec, WM8804_SPDTX4, 0x0f, sampling_freq); -+ -+ /* Now update wm8741 registers for the correct oversampling */ -+ if (samplerate <= 48000) -+ snd_soc_update_bits(wm8741_codec, WM8741_MODE_CONTROL_1, -+ WM8741_OSR_MASK, 0x00); -+ else if (samplerate <= 96000) -+ snd_soc_update_bits(wm8741_codec, WM8741_MODE_CONTROL_1, -+ WM8741_OSR_MASK, 0x20); -+ else -+ snd_soc_update_bits(wm8741_codec, WM8741_MODE_CONTROL_1, -+ WM8741_OSR_MASK, 0x40); -+ -+ /* wm8741 bit size */ -+ switch (params_width(params)) { -+ case 16: -+ snd_soc_update_bits(wm8741_codec, WM8741_FORMAT_CONTROL, -+ WM8741_IWL_MASK, 0x00); -+ break; -+ case 20: -+ snd_soc_update_bits(wm8741_codec, WM8741_FORMAT_CONTROL, -+ WM8741_IWL_MASK, 0x01); -+ break; -+ case 24: -+ snd_soc_update_bits(wm8741_codec, WM8741_FORMAT_CONTROL, -+ WM8741_IWL_MASK, 0x02); -+ break; -+ case 32: -+ snd_soc_update_bits(wm8741_codec, WM8741_FORMAT_CONTROL, -+ WM8741_IWL_MASK, 0x03); -+ break; -+ default: -+ dev_dbg(codec->dev, "wm8741_hw_params: Unsupported bit size param = %d", -+ params_width(params)); -+ return -EINVAL; -+ } -+ -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, 64); -+} -+/* machine stream operations */ -+static struct snd_soc_ops digidac1_soundcard_ops = { -+ .hw_params = digidac1_soundcard_hw_params, -+ .startup = digidac1_soundcard_startup, -+ .shutdown = digidac1_soundcard_shutdown, -+}; -+ -+static struct snd_soc_dai_link digidac1_soundcard_dai[] = { -+ { -+ .name = "RRA DigiDAC1", -+ .stream_name = "RRA DigiDAC1 HiFi", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "wm8804-spdif", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "wm8804.1-003b", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBM_CFM, -+ .ops = &digidac1_soundcard_ops, -+ .init = digidac1_soundcard_init, -+ }, -+ { -+ .name = "RRA DigiDAC11", -+ .stream_name = "RRA DigiDAC11 HiFi", -+ .cpu_dai_name = "wm8804-spdif", -+ .codec_dai_name = "wm8741", -+ .codec_name = "wm8741.1-001a", -+ .dai_fmt = SND_SOC_DAIFMT_I2S -+ | SND_SOC_DAIFMT_NB_NF -+ | SND_SOC_DAIFMT_CBS_CFS, -+ }, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card digidac1_soundcard = { -+ .name = "digidac1-soundcard", -+ .owner = THIS_MODULE, -+ .dai_link = digidac1_soundcard_dai, -+ .num_links = ARRAY_SIZE(digidac1_soundcard_dai), -+}; -+ -+static int digidac1_soundcard_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ -+ digidac1_soundcard.dev = &pdev->dev; -+ -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai = &digidac1_soundcard_dai[0]; -+ -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } -+ } -+ -+ ret = snd_soc_register_card(&digidac1_soundcard); -+ if (ret) -+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", -+ ret); -+ -+ return ret; -+} -+ -+static int digidac1_soundcard_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&digidac1_soundcard); -+} -+ -+static const struct of_device_id digidac1_soundcard_of_match[] = { -+ { .compatible = "rra,digidac1-soundcard", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, digidac1_soundcard_of_match); -+ -+static struct platform_driver digidac1_soundcard_driver = { -+ .driver = { -+ .name = "digidac1-audio", -+ .owner = THIS_MODULE, -+ .of_match_table = digidac1_soundcard_of_match, -+ }, -+ .probe = digidac1_soundcard_probe, -+ .remove = digidac1_soundcard_remove, -+}; -+ -+module_platform_driver(digidac1_soundcard_driver); -+ -+MODULE_AUTHOR("José M. Tasende "); -+MODULE_DESCRIPTION("ASoC Driver for RRA DigiDAC1"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/0082-Add-support-for-Dion-Audio-LOCO-DAC-AMP-HAT.patch b/target/linux/brcm2708/patches-4.9/0082-Add-support-for-Dion-Audio-LOCO-DAC-AMP-HAT.patch deleted file mode 100644 index b06cd35b7247..000000000000 --- a/target/linux/brcm2708/patches-4.9/0082-Add-support-for-Dion-Audio-LOCO-DAC-AMP-HAT.patch +++ /dev/null @@ -1,168 +0,0 @@ -From 999d3e615247d1921d245f7084194efbc697bb66 Mon Sep 17 00:00:00 2001 -From: DigitalDreamtime -Date: Sat, 2 Jul 2016 16:26:19 +0100 -Subject: [PATCH] Add support for Dion Audio LOCO DAC-AMP HAT - -Using dedicated machine driver and pcm5102a codec driver. - -Signed-off-by: DigitalDreamtime ---- - sound/soc/bcm/Kconfig | 7 +++ - sound/soc/bcm/Makefile | 3 +- - sound/soc/bcm/dionaudio_loco.c | 121 +++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 130 insertions(+), 1 deletion(-) - create mode 100644 sound/soc/bcm/dionaudio_loco.c - ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -116,3 +116,10 @@ config SND_DIGIDAC1_SOUNDCARD - select SND_SOC_WM8741 - help - Say Y or M if you want to add support for Red Rocks Audio DigiDAC1 board. -+ -+config SND_BCM2708_SOC_DIONAUDIO_LOCO -+ tristate "Support for Dion Audio LOCO DAC-AMP" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_PCM5102a -+ help -+ Say Y or M if you want to add support for Dion Audio LOCO. ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -23,6 +23,7 @@ snd-soc-iqaudio-digi-objs := iqaudio_dig - snd-soc-raspidac3-objs := raspidac3.o - snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o - snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o -+snd-soc-dionaudio-loco-objs := dionaudio_loco.o - - obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o -@@ -38,4 +39,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DIG - obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o - obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o - obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o -- -+obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o ---- /dev/null -+++ b/sound/soc/bcm/dionaudio_loco.c -@@ -0,0 +1,121 @@ -+/* -+ * ASoC Driver for Dion Audio LOCO DAC-AMP -+ * -+ * Author: Miquel Blauw -+ * Copyright 2016 -+ * -+ * Based on the software of the RPi-DAC writen by Florian Meier -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+static int snd_rpi_dionaudio_loco_hw_params( -+ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ -+ unsigned int sample_bits = -+ snd_pcm_format_physical_width(params_format(params)); -+ -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); -+} -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_rpi_dionaudio_loco_ops = { -+ .hw_params = snd_rpi_dionaudio_loco_hw_params, -+}; -+ -+static struct snd_soc_dai_link snd_rpi_dionaudio_loco_dai[] = { -+{ -+ .name = "DionAudio LOCO", -+ .stream_name = "DionAudio LOCO DAC-AMP", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "pcm5102a-hifi", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "pcm5102a-codec", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | -+ SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBS_CFS, -+ .ops = &snd_rpi_dionaudio_loco_ops, -+}, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_rpi_dionaudio_loco = { -+ .name = "snd_rpi_dionaudio_loco", -+ .dai_link = snd_rpi_dionaudio_loco_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_dionaudio_loco_dai), -+}; -+ -+static int snd_rpi_dionaudio_loco_probe(struct platform_device *pdev) -+{ -+ struct device_node *np; -+ int ret = 0; -+ -+ snd_rpi_dionaudio_loco.dev = &pdev->dev; -+ -+ np = pdev->dev.of_node; -+ if (np) { -+ struct snd_soc_dai_link *dai = &snd_rpi_dionaudio_loco_dai[0]; -+ struct device_node *i2s_np; -+ -+ i2s_np = of_parse_phandle(np, "i2s-controller", 0); -+ if (i2s_np) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_np; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_np; -+ } -+ } -+ -+ ret = snd_soc_register_card(&snd_rpi_dionaudio_loco); -+ if (ret) -+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", -+ ret); -+ -+ return ret; -+} -+ -+static int snd_rpi_dionaudio_loco_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&snd_rpi_dionaudio_loco); -+} -+ -+static const struct of_device_id snd_rpi_dionaudio_loco_of_match[] = { -+ { .compatible = "dionaudio,loco-pcm5242-tpa3118", }, -+ { /* sentinel */ }, -+}; -+MODULE_DEVICE_TABLE(of, snd_rpi_dionaudio_loco_of_match); -+ -+static struct platform_driver snd_rpi_dionaudio_loco_driver = { -+ .driver = { -+ .name = "snd-dionaudio-loco", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_rpi_dionaudio_loco_of_match, -+ }, -+ .probe = snd_rpi_dionaudio_loco_probe, -+ .remove = snd_rpi_dionaudio_loco_remove, -+}; -+ -+module_platform_driver(snd_rpi_dionaudio_loco_driver); -+ -+MODULE_AUTHOR("Miquel Blauw "); -+MODULE_DESCRIPTION("ASoC Driver for DionAudio LOCO"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/0083-Allo-Piano-DAC-boards-Initial-2-channel-stereo-suppo.patch b/target/linux/brcm2708/patches-4.9/0083-Allo-Piano-DAC-boards-Initial-2-channel-stereo-suppo.patch deleted file mode 100644 index 64e785d2a6a3..000000000000 --- a/target/linux/brcm2708/patches-4.9/0083-Allo-Piano-DAC-boards-Initial-2-channel-stereo-suppo.patch +++ /dev/null @@ -1,202 +0,0 @@ -From 779409817cf1af2c38055af64c11e026cb0bb4e9 Mon Sep 17 00:00:00 2001 -From: Clive Messer -Date: Mon, 19 Sep 2016 14:01:04 +0100 -Subject: [PATCH] Allo Piano DAC boards: Initial 2 channel (stereo) support - (#1645) - -Add initial 2 channel (stereo) support for Allo Piano DAC (2.0/2.1) boards, -using allo-piano-dac-pcm512x-audio overlay and allo-piano-dac ALSA ASoC -machine driver. - -NB. The initial support is 2 channel (stereo) ONLY! -(The Piano DAC 2.1 will only support 2 channel (stereo) left/right output, - pending an update to the upstream pcm512x codec driver, which will have - to be submitted via upstream. With the initial downstream support, - provided by this patch, the Piano DAC 2.1 subwoofer outputs will - not function.) - -Signed-off-by: Baswaraj K -Signed-off-by: Clive Messer -Tested-by: Clive Messer ---- - sound/soc/bcm/Kconfig | 7 ++ - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/allo-piano-dac.c | 144 +++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 153 insertions(+) - create mode 100644 sound/soc/bcm/allo-piano-dac.c - ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -123,3 +123,10 @@ config SND_BCM2708_SOC_DIONAUDIO_LOCO - select SND_SOC_PCM5102a - help - Say Y or M if you want to add support for Dion Audio LOCO. -+ -+config SND_BCM2708_SOC_ALLO_PIANO_DAC -+ tristate "Support for Allo Piano DAC" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_PCM512x_I2C -+ help -+ Say Y or M if you want to add support for Allo Piano DAC. ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -24,6 +24,7 @@ snd-soc-raspidac3-objs := raspidac3.o - snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o - snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o - snd-soc-dionaudio-loco-objs := dionaudio_loco.o -+snd-soc-allo-piano-dac-objs := allo-piano-dac.o - - obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o -@@ -40,3 +41,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) - obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o - obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o - obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o -+obj-$(CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC) += snd-soc-allo-piano-dac.o ---- /dev/null -+++ b/sound/soc/bcm/allo-piano-dac.c -@@ -0,0 +1,144 @@ -+/* -+ * ALSA ASoC Machine Driver for Allo Piano DAC -+ * -+ * Author: Baswaraj K -+ * Copyright 2016 -+ * based on code by Daniel Matuschek -+ * based on code by Florian Meier -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+static bool digital_gain_0db_limit = true; -+ -+static int snd_allo_piano_dac_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ if (digital_gain_0db_limit) { -+ int ret; -+ struct snd_soc_card *card = rtd->card; -+ -+ ret = snd_soc_limit_volume(card, "Digital Playback Volume", -+ 207); -+ if (ret < 0) -+ dev_warn(card->dev, "Failed to set volume limit: %d\n", -+ ret); -+ } -+ -+ return 0; -+} -+ -+static int snd_allo_piano_dac_hw_params( -+ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ -+ unsigned int sample_bits = -+ snd_pcm_format_physical_width(params_format(params)); -+ -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); -+} -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_allo_piano_dac_ops = { -+ .hw_params = snd_allo_piano_dac_hw_params, -+}; -+ -+static struct snd_soc_dai_link snd_allo_piano_dac_dai[] = { -+{ -+ .name = "Piano DAC", -+ .stream_name = "Piano DAC HiFi", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "pcm512x-hifi", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "pcm512x.1-004c", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | -+ SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBS_CFS, -+ .ops = &snd_allo_piano_dac_ops, -+ .init = snd_allo_piano_dac_init, -+}, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_allo_piano_dac = { -+ .name = "PianoDAC", -+ .owner = THIS_MODULE, -+ .dai_link = snd_allo_piano_dac_dai, -+ .num_links = ARRAY_SIZE(snd_allo_piano_dac_dai), -+}; -+ -+static int snd_allo_piano_dac_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ -+ snd_allo_piano_dac.dev = &pdev->dev; -+ -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai; -+ -+ dai = &snd_allo_piano_dac_dai[0]; -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } -+ -+ digital_gain_0db_limit = !of_property_read_bool( -+ pdev->dev.of_node, "allo,24db_digital_gain"); -+ } -+ -+ ret = snd_soc_register_card(&snd_allo_piano_dac); -+ if (ret) -+ dev_err(&pdev->dev, -+ "snd_soc_register_card() failed: %d\n", ret); -+ -+ return ret; -+} -+ -+static int snd_allo_piano_dac_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&snd_allo_piano_dac); -+} -+ -+static const struct of_device_id snd_allo_piano_dac_of_match[] = { -+ { .compatible = "allo,piano-dac", }, -+ { /* sentinel */ }, -+}; -+MODULE_DEVICE_TABLE(of, snd_allo_piano_dac_of_match); -+ -+static struct platform_driver snd_allo_piano_dac_driver = { -+ .driver = { -+ .name = "snd-allo-piano-dac", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_allo_piano_dac_of_match, -+ }, -+ .probe = snd_allo_piano_dac_probe, -+ .remove = snd_allo_piano_dac_remove, -+}; -+ -+module_platform_driver(snd_allo_piano_dac_driver); -+ -+MODULE_AUTHOR("Baswaraj K "); -+MODULE_DESCRIPTION("ALSA ASoC Machine Driver for Allo Piano DAC"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/0084-Support-for-Blokas-Labs-pisound-board.patch b/target/linux/brcm2708/patches-4.9/0084-Support-for-Blokas-Labs-pisound-board.patch deleted file mode 100644 index 21f43347b3f2..000000000000 --- a/target/linux/brcm2708/patches-4.9/0084-Support-for-Blokas-Labs-pisound-board.patch +++ /dev/null @@ -1,1168 +0,0 @@ -From 7d8efd6f3198fd3dafe5a74003616a2aea5dc6c5 Mon Sep 17 00:00:00 2001 -From: gtrainavicius -Date: Sun, 23 Oct 2016 12:06:53 +0300 -Subject: [PATCH] Support for Blokas Labs pisound board - -Pisound dynamic overlay (#1760) - -Restructuring pisound-overlay.dts, so it can be loaded and unloaded dynamically using dtoverlay. - -Print a logline when the kernel module is removed. ---- - .../devicetree/bindings/vendor-prefixes.txt | 1 + - arch/arm/boot/dts/overlays/pisound-overlay.dts | 94 +- - sound/soc/bcm/Kconfig | 6 + - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/pisound.c | 989 +++++++++++++++++++++ - 5 files changed, 1048 insertions(+), 44 deletions(-) - create mode 100644 sound/soc/bcm/pisound.c - ---- a/Documentation/devicetree/bindings/vendor-prefixes.txt -+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt -@@ -40,6 +40,7 @@ auvidea Auvidea GmbH - avago Avago Technologies - avic Shanghai AVIC Optoelectronics Co., Ltd. - axis Axis Communications AB -+blokaslabs Vilniaus Blokas UAB - boe BOE Technology Group Co., Ltd. - bosch Bosch Sensortec GmbH - boundary Boundary Devices Inc. ---- a/arch/arm/boot/dts/overlays/pisound-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pisound-overlay.dts -@@ -26,6 +26,54 @@ - compatible = "brcm,bcm2708"; - - fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&spi0>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pisound_spi: pisound_spi@0{ -+ compatible = "blokaslabs,pisound-spi"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins>; -+ spi-max-frequency = <1000000>; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target-path = "/"; -+ __overlay__ { -+ pcm5102a-codec { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5102a"; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@5 { - target = <&sound>; - __overlay__ { - compatible = "blokaslabs,pisound"; -@@ -49,7 +97,7 @@ - }; - }; - -- fragment@1 { -+ fragment@6 { - target = <&gpio>; - __overlay__ { - pinctrl-names = "default"; -@@ -63,52 +111,10 @@ - }; - }; - -- fragment@2 { -+ fragment@7 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; -- -- fragment@3 { -- target-path = "/"; -- __overlay__ { -- pcm5102a-codec { -- #sound-dai-cells = <0>; -- compatible = "ti,pcm5102a"; -- status = "okay"; -- }; -- }; -- }; -- -- fragment@4 { -- target = <&spi0>; -- __overlay__ { -- status = "okay"; -- -- spidev@0{ -- status = "disabled"; -- }; -- -- spidev@1{ -- status = "okay"; -- }; -- }; -- }; -- -- fragment@5 { -- target = <&spi0>; -- __overlay__ { -- #address-cells = <1>; -- #size-cells = <0>; -- -- pisound_spi: pisound_spi@0{ -- compatible = "blokaslabs,pisound-spi"; -- reg = <0>; -- pinctrl-names = "default"; -- pinctrl-0 = <&spi0_pins>; -- spi-max-frequency = <1000000>; -- }; -- }; -- }; - }; ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -130,3 +130,9 @@ config SND_BCM2708_SOC_ALLO_PIANO_DAC - select SND_SOC_PCM512x_I2C - help - Say Y or M if you want to add support for Allo Piano DAC. -+ -+config SND_PISOUND -+ tristate "Support for Blokas Labs pisound" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ help -+ Say Y or M if you want to add support for Blokas Labs pisound. ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -25,6 +25,7 @@ snd-soc-audioinjector-pi-soundcard-objs - snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o - snd-soc-dionaudio-loco-objs := dionaudio_loco.o - snd-soc-allo-piano-dac-objs := allo-piano-dac.o -+snd-soc-pisound-objs := pisound.o - - obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o -@@ -42,3 +43,4 @@ obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDC - obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o - obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o - obj-$(CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC) += snd-soc-allo-piano-dac.o -+obj-$(CONFIG_SND_PISOUND) += snd-soc-pisound.o ---- /dev/null -+++ b/sound/soc/bcm/pisound.c -@@ -0,0 +1,989 @@ -+/* -+ * pisound Linux kernel module. -+ * Copyright (C) 2016 Vilniaus Blokas UAB, http://blokas.io/pisound -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; version 2 of the -+ * License. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -+ * MA 02110-1301, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static int pisnd_spi_init(struct device *dev); -+static void pisnd_spi_uninit(void); -+ -+static void pisnd_spi_send(uint8_t val); -+static uint8_t pisnd_spi_recv(uint8_t *buffer, uint8_t length); -+ -+typedef void (*pisnd_spi_recv_cb)(void *data); -+static void pisnd_spi_set_callback(pisnd_spi_recv_cb cb, void *data); -+ -+static const char *pisnd_spi_get_serial(void); -+static const char *pisnd_spi_get_id(void); -+static const char *pisnd_spi_get_version(void); -+ -+static int pisnd_midi_init(struct snd_card *card); -+static void pisnd_midi_uninit(void); -+ -+#define PISOUND_LOG_PREFIX "pisound: " -+ -+#ifdef DEBUG -+# define printd(...) pr_alert(PISOUND_LOG_PREFIX __VA_ARGS__) -+#else -+# define printd(...) do {} while (0) -+#endif -+ -+#define printe(...) pr_err(PISOUND_LOG_PREFIX __VA_ARGS__) -+#define printi(...) pr_info(PISOUND_LOG_PREFIX __VA_ARGS__) -+ -+static int pisnd_output_open(struct snd_rawmidi_substream *substream) -+{ -+ return 0; -+} -+ -+static int pisnd_output_close(struct snd_rawmidi_substream *substream) -+{ -+ return 0; -+} -+ -+static void pisnd_output_trigger( -+ struct snd_rawmidi_substream *substream, -+ int up -+ ) -+{ -+ uint8_t data; -+ -+ if (!up) -+ return; -+ -+ while (snd_rawmidi_transmit_peek(substream, &data, 1)) { -+ pisnd_spi_send(data); -+ snd_rawmidi_transmit_ack(substream, 1); -+ } -+} -+ -+static void pisnd_output_drain(struct snd_rawmidi_substream *substream) -+{ -+ uint8_t data; -+ -+ while (snd_rawmidi_transmit_peek(substream, &data, 1)) { -+ pisnd_spi_send(data); -+ -+ snd_rawmidi_transmit_ack(substream, 1); -+ } -+} -+ -+static int pisnd_input_open(struct snd_rawmidi_substream *substream) -+{ -+ return 0; -+} -+ -+static int pisnd_input_close(struct snd_rawmidi_substream *substream) -+{ -+ return 0; -+} -+ -+static void pisnd_midi_recv_callback(void *substream) -+{ -+ uint8_t data[128]; -+ uint8_t n = 0; -+ -+ while ((n = pisnd_spi_recv(data, sizeof(data)))) { -+ int res = snd_rawmidi_receive(substream, data, n); -+ (void)res; -+ printd("midi recv 0x%02x, res = %d\n", data, res); -+ } -+} -+ -+static void pisnd_input_trigger(struct snd_rawmidi_substream *substream, int up) -+{ -+ if (up) { -+ pisnd_spi_set_callback(pisnd_midi_recv_callback, substream); -+ pisnd_midi_recv_callback(substream); -+ } else { -+ pisnd_spi_set_callback(NULL, NULL); -+ } -+} -+ -+static struct snd_rawmidi *g_rmidi; -+ -+static struct snd_rawmidi_ops pisnd_output_ops = { -+ .open = pisnd_output_open, -+ .close = pisnd_output_close, -+ .trigger = pisnd_output_trigger, -+ .drain = pisnd_output_drain, -+}; -+ -+static struct snd_rawmidi_ops pisnd_input_ops = { -+ .open = pisnd_input_open, -+ .close = pisnd_input_close, -+ .trigger = pisnd_input_trigger, -+}; -+ -+static void pisnd_get_port_info( -+ struct snd_rawmidi *rmidi, -+ int number, -+ struct snd_seq_port_info *seq_port_info -+ ) -+{ -+ seq_port_info->type = -+ SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | -+ SNDRV_SEQ_PORT_TYPE_HARDWARE | -+ SNDRV_SEQ_PORT_TYPE_PORT; -+ seq_port_info->midi_voices = 0; -+} -+ -+static struct snd_rawmidi_global_ops pisnd_global_ops = { -+ .get_port_info = pisnd_get_port_info, -+}; -+ -+static int pisnd_midi_init(struct snd_card *card) -+{ -+ int err = snd_rawmidi_new(card, "pisound MIDI", 0, 1, 1, &g_rmidi); -+ -+ if (err < 0) { -+ printe("snd_rawmidi_new failed: %d\n", err); -+ return err; -+ } -+ -+ strcpy(g_rmidi->name, "pisound MIDI "); -+ strcat(g_rmidi->name, pisnd_spi_get_serial()); -+ -+ g_rmidi->info_flags = -+ SNDRV_RAWMIDI_INFO_OUTPUT | -+ SNDRV_RAWMIDI_INFO_INPUT | -+ SNDRV_RAWMIDI_INFO_DUPLEX; -+ -+ g_rmidi->ops = &pisnd_global_ops; -+ -+ g_rmidi->private_data = (void *)0; -+ -+ snd_rawmidi_set_ops( -+ g_rmidi, -+ SNDRV_RAWMIDI_STREAM_OUTPUT, -+ &pisnd_output_ops -+ ); -+ -+ snd_rawmidi_set_ops( -+ g_rmidi, -+ SNDRV_RAWMIDI_STREAM_INPUT, -+ &pisnd_input_ops -+ ); -+ -+ return 0; -+} -+ -+static void pisnd_midi_uninit(void) -+{ -+} -+ -+static void *g_recvData; -+static pisnd_spi_recv_cb g_recvCallback; -+ -+#define FIFO_SIZE 512 -+ -+static char g_serial_num[11]; -+static char g_id[25]; -+static char g_version[5]; -+ -+DEFINE_KFIFO(spi_fifo_in, uint8_t, FIFO_SIZE); -+DEFINE_KFIFO(spi_fifo_out, uint8_t, FIFO_SIZE); -+ -+static struct gpio_desc *data_available; -+static struct gpio_desc *spi_reset; -+ -+static struct spi_device *pisnd_spi_device; -+ -+static struct workqueue_struct *pisnd_workqueue; -+static struct work_struct pisnd_work_process; -+ -+static void pisnd_work_handler(struct work_struct *work); -+ -+static uint16_t spi_transfer16(uint16_t val); -+ -+static int pisnd_init_workqueues(void) -+{ -+ pisnd_workqueue = create_singlethread_workqueue("pisnd_workqueue"); -+ INIT_WORK(&pisnd_work_process, pisnd_work_handler); -+ -+ return 0; -+} -+ -+static void pisnd_uninit_workqueues(void) -+{ -+ flush_workqueue(pisnd_workqueue); -+ destroy_workqueue(pisnd_workqueue); -+ -+ pisnd_workqueue = NULL; -+} -+ -+static bool pisnd_spi_has_more(void) -+{ -+ return gpiod_get_value(data_available); -+} -+ -+enum task_e { -+ TASK_PROCESS = 0, -+}; -+ -+static void pisnd_schedule_process(enum task_e task) -+{ -+ if (pisnd_spi_device != NULL && -+ pisnd_workqueue != NULL && -+ !work_pending(&pisnd_work_process) -+ ) { -+ printd("schedule: has more = %d\n", pisnd_spi_has_more()); -+ if (task == TASK_PROCESS) -+ queue_work(pisnd_workqueue, &pisnd_work_process); -+ } -+} -+ -+static irqreturn_t data_available_interrupt_handler(int irq, void *dev_id) -+{ -+ if (irq == gpiod_to_irq(data_available) && pisnd_spi_has_more()) { -+ printd("schedule from irq\n"); -+ pisnd_schedule_process(TASK_PROCESS); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+static DEFINE_SPINLOCK(spilock); -+static unsigned long spilockflags; -+ -+static uint16_t spi_transfer16(uint16_t val) -+{ -+ int err; -+ struct spi_transfer transfer; -+ struct spi_message msg; -+ uint8_t txbuf[2]; -+ uint8_t rxbuf[2]; -+ -+ if (!pisnd_spi_device) { -+ printe("pisnd_spi_device null, returning\n"); -+ return 0; -+ } -+ -+ spi_message_init(&msg); -+ -+ memset(&transfer, 0, sizeof(transfer)); -+ memset(&rxbuf, 0, sizeof(rxbuf)); -+ -+ txbuf[0] = val >> 8; -+ txbuf[1] = val & 0xff; -+ -+ transfer.tx_buf = &txbuf; -+ transfer.rx_buf = &rxbuf; -+ transfer.len = sizeof(txbuf); -+ transfer.speed_hz = 125000; -+ transfer.delay_usecs = 100; -+ spi_message_add_tail(&transfer, &msg); -+ -+ spin_lock_irqsave(&spilock, spilockflags); -+ err = spi_sync(pisnd_spi_device, &msg); -+ spin_unlock_irqrestore(&spilock, spilockflags); -+ -+ if (err < 0) { -+ printe("spi_sync error %d\n", err); -+ return 0; -+ } -+ -+ printd("received: %02x%02x\n", rxbuf[0], rxbuf[1]); -+ printd("hasMore %d\n", pisnd_spi_has_more()); -+ -+ return (rxbuf[0] << 8) | rxbuf[1]; -+} -+ -+static int spi_read_bytes(char *dst, size_t length, uint8_t *bytesRead) -+{ -+ uint16_t rx; -+ uint8_t size; -+ uint8_t i; -+ -+ memset(dst, 0, length); -+ *bytesRead = 0; -+ -+ rx = spi_transfer16(0); -+ if (!(rx >> 8)) -+ return -EINVAL; -+ -+ size = rx & 0xff; -+ -+ if (size > length) -+ return -EINVAL; -+ -+ for (i = 0; i < size; ++i) { -+ rx = spi_transfer16(0); -+ if (!(rx >> 8)) -+ return -EINVAL; -+ -+ dst[i] = rx & 0xff; -+ } -+ -+ *bytesRead = i; -+ -+ return 0; -+} -+ -+static int spi_device_match(struct device *dev, void *data) -+{ -+ struct spi_device *spi = container_of(dev, struct spi_device, dev); -+ -+ printd(" %s %s %dkHz %d bits mode=0x%02X\n", -+ spi->modalias, dev_name(dev), spi->max_speed_hz/1000, -+ spi->bits_per_word, spi->mode); -+ -+ if (strcmp("pisound-spi", spi->modalias) == 0) { -+ printi("\tFound!\n"); -+ return 1; -+ } -+ -+ printe("\tNot found!\n"); -+ return 0; -+} -+ -+static struct spi_device *pisnd_spi_find_device(void) -+{ -+ struct device *dev; -+ -+ printi("Searching for spi device...\n"); -+ dev = bus_find_device(&spi_bus_type, NULL, NULL, spi_device_match); -+ if (dev != NULL) -+ return container_of(dev, struct spi_device, dev); -+ else -+ return NULL; -+} -+ -+static void pisnd_work_handler(struct work_struct *work) -+{ -+ uint16_t rx; -+ uint16_t tx; -+ uint8_t val; -+ -+ if (work == &pisnd_work_process) { -+ if (pisnd_spi_device == NULL) -+ return; -+ -+ do { -+ val = 0; -+ tx = 0; -+ -+ if (kfifo_get(&spi_fifo_out, &val)) -+ tx = 0x0f00 | val; -+ -+ rx = spi_transfer16(tx); -+ -+ if (rx & 0xff00) { -+ kfifo_put(&spi_fifo_in, rx & 0xff); -+ if (kfifo_len(&spi_fifo_in) > 16 -+ && g_recvCallback) -+ g_recvCallback(g_recvData); -+ } -+ } while (rx != 0 -+ || !kfifo_is_empty(&spi_fifo_out) -+ || pisnd_spi_has_more() -+ ); -+ -+ if (!kfifo_is_empty(&spi_fifo_in) && g_recvCallback) -+ g_recvCallback(g_recvData); -+ } -+} -+ -+static int pisnd_spi_gpio_init(struct device *dev) -+{ -+ spi_reset = gpiod_get_index(dev, "reset", 1, GPIOD_ASIS); -+ data_available = gpiod_get_index(dev, "data_available", 0, GPIOD_ASIS); -+ -+ gpiod_direction_output(spi_reset, 1); -+ gpiod_direction_input(data_available); -+ -+ /* Reset the slave. */ -+ gpiod_set_value(spi_reset, false); -+ mdelay(1); -+ gpiod_set_value(spi_reset, true); -+ -+ /* Give time for spi slave to start. */ -+ mdelay(64); -+ -+ return 0; -+} -+ -+static void pisnd_spi_gpio_uninit(void) -+{ -+ gpiod_set_value(spi_reset, false); -+ gpiod_put(spi_reset); -+ spi_reset = NULL; -+ -+ gpiod_put(data_available); -+ data_available = NULL; -+} -+ -+static int pisnd_spi_gpio_irq_init(struct device *dev) -+{ -+ return request_irq( -+ gpiod_to_irq(data_available), -+ data_available_interrupt_handler, -+ IRQF_TIMER | IRQF_TRIGGER_RISING, -+ "data_available_int", -+ NULL -+ ); -+} -+ -+static void pisnd_spi_gpio_irq_uninit(void) -+{ -+ free_irq(gpiod_to_irq(data_available), NULL); -+} -+ -+static int spi_read_info(void) -+{ -+ uint16_t tmp; -+ uint8_t count; -+ uint8_t n; -+ uint8_t i; -+ uint8_t j; -+ char buffer[257]; -+ int ret; -+ char *p; -+ -+ memset(g_serial_num, 0, sizeof(g_serial_num)); -+ memset(g_version, 0, sizeof(g_version)); -+ memset(g_id, 0, sizeof(g_id)); -+ -+ tmp = spi_transfer16(0); -+ -+ if (!(tmp >> 8)) -+ return -EINVAL; -+ -+ count = tmp & 0xff; -+ -+ for (i = 0; i < count; ++i) { -+ memset(buffer, 0, sizeof(buffer)); -+ ret = spi_read_bytes(buffer, sizeof(buffer)-1, &n); -+ -+ if (ret < 0) -+ return ret; -+ -+ switch (i) { -+ case 0: -+ if (n != 2) -+ return -EINVAL; -+ -+ snprintf( -+ g_version, -+ sizeof(g_version), -+ "%x.%02x", -+ buffer[0], -+ buffer[1] -+ ); -+ break; -+ case 1: -+ if (n >= sizeof(g_serial_num)) -+ return -EINVAL; -+ -+ memcpy(g_serial_num, buffer, sizeof(g_serial_num)); -+ break; -+ case 2: -+ { -+ if (n >= sizeof(g_id)) -+ return -EINVAL; -+ -+ p = g_id; -+ for (j = 0; j < n; ++j) -+ p += sprintf(p, "%02x", buffer[j]); -+ } -+ break; -+ default: -+ break; -+ } -+ } -+ -+ return 0; -+} -+ -+static int pisnd_spi_init(struct device *dev) -+{ -+ int ret; -+ struct spi_device *spi; -+ -+ memset(g_serial_num, 0, sizeof(g_serial_num)); -+ memset(g_id, 0, sizeof(g_id)); -+ memset(g_version, 0, sizeof(g_version)); -+ -+ spi = pisnd_spi_find_device(); -+ -+ if (spi != NULL) { -+ printd("initializing spi!\n"); -+ pisnd_spi_device = spi; -+ ret = spi_setup(pisnd_spi_device); -+ } else { -+ printe("SPI device not found, deferring!\n"); -+ return -EPROBE_DEFER; -+ } -+ -+ ret = pisnd_spi_gpio_init(dev); -+ -+ if (ret < 0) { -+ printe("SPI GPIO init failed: %d\n", ret); -+ spi_dev_put(pisnd_spi_device); -+ pisnd_spi_device = NULL; -+ pisnd_spi_gpio_uninit(); -+ return ret; -+ } -+ -+ ret = spi_read_info(); -+ -+ if (ret < 0) { -+ printe("Reading card info failed: %d\n", ret); -+ spi_dev_put(pisnd_spi_device); -+ pisnd_spi_device = NULL; -+ pisnd_spi_gpio_uninit(); -+ return ret; -+ } -+ -+ /* Flash the LEDs. */ -+ spi_transfer16(0xf000); -+ -+ ret = pisnd_spi_gpio_irq_init(dev); -+ if (ret < 0) { -+ printe("SPI irq request failed: %d\n", ret); -+ spi_dev_put(pisnd_spi_device); -+ pisnd_spi_device = NULL; -+ pisnd_spi_gpio_irq_uninit(); -+ pisnd_spi_gpio_uninit(); -+ } -+ -+ ret = pisnd_init_workqueues(); -+ if (ret != 0) { -+ printe("Workqueue initialization failed: %d\n", ret); -+ spi_dev_put(pisnd_spi_device); -+ pisnd_spi_device = NULL; -+ pisnd_spi_gpio_irq_uninit(); -+ pisnd_spi_gpio_uninit(); -+ pisnd_uninit_workqueues(); -+ return ret; -+ } -+ -+ if (pisnd_spi_has_more()) { -+ printd("data is available, scheduling from init\n"); -+ pisnd_schedule_process(TASK_PROCESS); -+ } -+ -+ return 0; -+} -+ -+static void pisnd_spi_uninit(void) -+{ -+ pisnd_uninit_workqueues(); -+ -+ spi_dev_put(pisnd_spi_device); -+ pisnd_spi_device = NULL; -+ -+ pisnd_spi_gpio_irq_uninit(); -+ pisnd_spi_gpio_uninit(); -+} -+ -+static void pisnd_spi_send(uint8_t val) -+{ -+ kfifo_put(&spi_fifo_out, val); -+ printd("schedule from spi_send\n"); -+ pisnd_schedule_process(TASK_PROCESS); -+} -+ -+static uint8_t pisnd_spi_recv(uint8_t *buffer, uint8_t length) -+{ -+ return kfifo_out(&spi_fifo_in, buffer, length); -+} -+ -+static void pisnd_spi_set_callback(pisnd_spi_recv_cb cb, void *data) -+{ -+ g_recvData = data; -+ g_recvCallback = cb; -+} -+ -+static const char *pisnd_spi_get_serial(void) -+{ -+ if (strlen(g_serial_num)) -+ return g_serial_num; -+ -+ return ""; -+} -+ -+static const char *pisnd_spi_get_id(void) -+{ -+ if (strlen(g_id)) -+ return g_id; -+ -+ return ""; -+} -+ -+static const char *pisnd_spi_get_version(void) -+{ -+ if (strlen(g_version)) -+ return g_version; -+ -+ return ""; -+} -+ -+static const struct of_device_id pisound_of_match[] = { -+ { .compatible = "blokaslabs,pisound", }, -+ { .compatible = "blokaslabs,pisound-spi", }, -+ {}, -+}; -+ -+static struct gpio_desc *osr0, *osr1, *osr2; -+static struct gpio_desc *reset; -+static struct gpio_desc *button; -+ -+static int pisnd_hw_params( -+ struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params -+ ) -+{ -+ printd("rate = %d\n", params_rate(params)); -+ printd("ch = %d\n", params_channels(params)); -+ printd("bits = %u\n", -+ snd_pcm_format_physical_width(params_format(params))); -+ printd("format = %d\n", params_format(params)); -+ -+ gpiod_set_value(reset, false); -+ -+ switch (params_rate(params)) { -+ case 48000: -+ gpiod_set_value(osr0, true); -+ gpiod_set_value(osr1, false); -+ gpiod_set_value(osr2, false); -+ break; -+ case 96000: -+ gpiod_set_value(osr0, true); -+ gpiod_set_value(osr1, true); -+ gpiod_set_value(osr2, false); -+ break; -+ case 192000: -+ gpiod_set_value(osr0, true); -+ gpiod_set_value(osr1, true); -+ gpiod_set_value(osr2, true); -+ break; -+ default: -+ printe("Unsupported rate %u!\n", params_rate(params)); -+ return -EINVAL; -+ } -+ -+ gpiod_set_value(reset, true); -+ -+ return 0; -+} -+ -+static unsigned int rates[3] = { -+ 48000, 96000, 192000 -+}; -+ -+static struct snd_pcm_hw_constraint_list constraints_rates = { -+ .count = ARRAY_SIZE(rates), -+ .list = rates, -+ .mask = 0, -+}; -+ -+static unsigned int sample_bits[] = { -+ 24, 32 -+}; -+ -+static struct snd_pcm_hw_constraint_list constraints_sample_bits = { -+ .count = ARRAY_SIZE(sample_bits), -+ .list = sample_bits, -+ .mask = 0, -+}; -+ -+static int pisnd_startup(struct snd_pcm_substream *substream) -+{ -+ int err = snd_pcm_hw_constraint_list( -+ substream->runtime, -+ 0, -+ SNDRV_PCM_HW_PARAM_RATE, -+ &constraints_rates -+ ); -+ -+ if (err < 0) -+ return err; -+ -+ err = snd_pcm_hw_constraint_list( -+ substream->runtime, -+ 0, -+ SNDRV_PCM_HW_PARAM_SAMPLE_BITS, -+ &constraints_sample_bits -+ ); -+ -+ if (err < 0) -+ return err; -+ -+ return 0; -+} -+ -+static struct snd_soc_ops pisnd_ops = { -+ .startup = pisnd_startup, -+ .hw_params = pisnd_hw_params, -+}; -+ -+static struct snd_soc_dai_link pisnd_dai[] = { -+ { -+ .name = "pisound", -+ .stream_name = "pisound", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "snd-soc-dummy-dai", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "snd-soc-dummy", -+ .dai_fmt = -+ SND_SOC_DAIFMT_I2S | -+ SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBM_CFM, -+ .ops = &pisnd_ops, -+ }, -+}; -+ -+static int pisnd_card_probe(struct snd_soc_card *card) -+{ -+ int err = pisnd_midi_init(card->snd_card); -+ -+ if (err < 0) -+ printe("pisnd_midi_init failed: %d\n", err); -+ -+ return err; -+} -+ -+static int pisnd_card_remove(struct snd_soc_card *card) -+{ -+ pisnd_midi_uninit(); -+ return 0; -+} -+ -+static struct snd_soc_card pisnd_card = { -+ .name = "pisound", -+ .owner = THIS_MODULE, -+ .dai_link = pisnd_dai, -+ .num_links = ARRAY_SIZE(pisnd_dai), -+ .probe = pisnd_card_probe, -+ .remove = pisnd_card_remove, -+}; -+ -+static int pisnd_init_gpio(struct device *dev) -+{ -+ osr0 = gpiod_get_index(dev, "osr", 0, GPIOD_ASIS); -+ osr1 = gpiod_get_index(dev, "osr", 1, GPIOD_ASIS); -+ osr2 = gpiod_get_index(dev, "osr", 2, GPIOD_ASIS); -+ -+ reset = gpiod_get_index(dev, "reset", 0, GPIOD_ASIS); -+ -+ button = gpiod_get_index(dev, "button", 0, GPIOD_ASIS); -+ -+ gpiod_direction_output(osr0, 1); -+ gpiod_direction_output(osr1, 1); -+ gpiod_direction_output(osr2, 1); -+ gpiod_direction_output(reset, 1); -+ -+ gpiod_set_value(reset, false); -+ gpiod_set_value(osr0, true); -+ gpiod_set_value(osr1, false); -+ gpiod_set_value(osr2, false); -+ gpiod_set_value(reset, true); -+ -+ gpiod_export(button, false); -+ -+ return 0; -+} -+ -+static int pisnd_uninit_gpio(void) -+{ -+ int i; -+ -+ struct gpio_desc **gpios[] = { -+ &osr0, &osr1, &osr2, &reset, &button, -+ }; -+ -+ gpiod_unexport(button); -+ -+ for (i = 0; i < ARRAY_SIZE(gpios); ++i) { -+ if (*gpios[i] == NULL) { -+ printd("weird, GPIO[%d] is NULL already\n", i); -+ continue; -+ } -+ -+ gpiod_put(*gpios[i]); -+ *gpios[i] = NULL; -+ } -+ -+ return 0; -+} -+ -+static struct kobject *pisnd_kobj; -+ -+static ssize_t pisnd_serial_show( -+ struct kobject *kobj, -+ struct kobj_attribute *attr, -+ char *buf -+ ) -+{ -+ return sprintf(buf, "%s\n", pisnd_spi_get_serial()); -+} -+ -+static ssize_t pisnd_id_show( -+ struct kobject *kobj, -+ struct kobj_attribute *attr, -+ char *buf -+ ) -+{ -+ return sprintf(buf, "%s\n", pisnd_spi_get_id()); -+} -+ -+static ssize_t pisnd_version_show( -+ struct kobject *kobj, -+ struct kobj_attribute *attr, -+ char *buf -+ ) -+{ -+ return sprintf(buf, "%s\n", pisnd_spi_get_version()); -+} -+ -+static struct kobj_attribute pisnd_serial_attribute = -+ __ATTR(serial, 0644, pisnd_serial_show, NULL); -+static struct kobj_attribute pisnd_id_attribute = -+ __ATTR(id, 0644, pisnd_id_show, NULL); -+static struct kobj_attribute pisnd_version_attribute = -+ __ATTR(version, 0644, pisnd_version_show, NULL); -+ -+static struct attribute *attrs[] = { -+ &pisnd_serial_attribute.attr, -+ &pisnd_id_attribute.attr, -+ &pisnd_version_attribute.attr, -+ NULL -+}; -+ -+static struct attribute_group attr_group = { .attrs = attrs }; -+ -+static int pisnd_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ int i; -+ -+ ret = pisnd_spi_init(&pdev->dev); -+ if (ret < 0) { -+ printe("pisnd_spi_init failed: %d\n", ret); -+ return ret; -+ } -+ -+ printi("Detected pisound card:\n"); -+ printi("\tSerial: %s\n", pisnd_spi_get_serial()); -+ printi("\tVersion: %s\n", pisnd_spi_get_version()); -+ printi("\tId: %s\n", pisnd_spi_get_id()); -+ -+ pisnd_kobj = kobject_create_and_add("pisound", kernel_kobj); -+ if (!pisnd_kobj) { -+ pisnd_spi_uninit(); -+ return -ENOMEM; -+ } -+ -+ ret = sysfs_create_group(pisnd_kobj, &attr_group); -+ if (ret < 0) { -+ pisnd_spi_uninit(); -+ kobject_put(pisnd_kobj); -+ return -ENOMEM; -+ } -+ -+ pisnd_init_gpio(&pdev->dev); -+ pisnd_card.dev = &pdev->dev; -+ -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ -+ i2s_node = of_parse_phandle( -+ pdev->dev.of_node, -+ "i2s-controller", -+ 0 -+ ); -+ -+ for (i = 0; i < pisnd_card.num_links; ++i) { -+ struct snd_soc_dai_link *dai = &pisnd_dai[i]; -+ -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ dai->stream_name = pisnd_spi_get_serial(); -+ } -+ } -+ } -+ -+ ret = snd_soc_register_card(&pisnd_card); -+ -+ if (ret < 0) { -+ printe("snd_soc_register_card() failed: %d\n", ret); -+ pisnd_uninit_gpio(); -+ kobject_put(pisnd_kobj); -+ pisnd_spi_uninit(); -+ } -+ -+ return ret; -+} -+ -+static int pisnd_remove(struct platform_device *pdev) -+{ -+ printi("Unloading.\n"); -+ -+ if (pisnd_kobj) { -+ kobject_put(pisnd_kobj); -+ pisnd_kobj = NULL; -+ } -+ -+ pisnd_spi_uninit(); -+ -+ /* Turn off */ -+ gpiod_set_value(reset, false); -+ pisnd_uninit_gpio(); -+ -+ return snd_soc_unregister_card(&pisnd_card); -+} -+ -+MODULE_DEVICE_TABLE(of, pisound_of_match); -+ -+static struct platform_driver pisnd_driver = { -+ .driver = { -+ .name = "snd-rpi-pisound", -+ .owner = THIS_MODULE, -+ .of_match_table = pisound_of_match, -+ }, -+ .probe = pisnd_probe, -+ .remove = pisnd_remove, -+}; -+ -+module_platform_driver(pisnd_driver); -+ -+MODULE_AUTHOR("Giedrius Trainavicius "); -+MODULE_DESCRIPTION("ASoC Driver for pisound, http://blokas.io/pisound"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/0085-rpi_display-add-backlight-driver-and-overlay.patch b/target/linux/brcm2708/patches-4.9/0085-rpi_display-add-backlight-driver-and-overlay.patch deleted file mode 100644 index 67c0e3f5cd8f..000000000000 --- a/target/linux/brcm2708/patches-4.9/0085-rpi_display-add-backlight-driver-and-overlay.patch +++ /dev/null @@ -1,164 +0,0 @@ -From ae5ae9278768c3d096910705bfa9af85da20a8cf Mon Sep 17 00:00:00 2001 -From: P33M -Date: Wed, 21 Oct 2015 14:55:21 +0100 -Subject: [PATCH] rpi_display: add backlight driver and overlay - -Add a mailbox-driven backlight controller for the Raspberry Pi DSI -touchscreen display. Requires updated GPU firmware to recognise the -mailbox request. - -Signed-off-by: Gordon Hollingworth ---- - drivers/video/backlight/Kconfig | 6 ++ - drivers/video/backlight/Makefile | 1 + - drivers/video/backlight/rpi_backlight.c | 119 ++++++++++++++++++++++++++++++++ - 3 files changed, 126 insertions(+) - create mode 100644 drivers/video/backlight/rpi_backlight.c - ---- a/drivers/video/backlight/Kconfig -+++ b/drivers/video/backlight/Kconfig -@@ -265,6 +265,12 @@ config BACKLIGHT_PWM - If you have a LCD backlight adjustable by PWM, say Y to enable - this driver. - -+config BACKLIGHT_RPI -+ tristate "Raspberry Pi display firmware driven backlight" -+ help -+ If you have the Raspberry Pi DSI touchscreen display, say Y to -+ enable the mailbox-controlled backlight driver. -+ - config BACKLIGHT_DA903X - tristate "Backlight Driver for DA9030/DA9034 using WLED" - depends on PMIC_DA903X ---- a/drivers/video/backlight/Makefile -+++ b/drivers/video/backlight/Makefile -@@ -50,6 +50,7 @@ obj-$(CONFIG_BACKLIGHT_PANDORA) += pand - obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o - obj-$(CONFIG_BACKLIGHT_PM8941_WLED) += pm8941-wled.o - obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o -+obj-$(CONFIG_BACKLIGHT_RPI) += rpi_backlight.o - obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o - obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o - obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o ---- /dev/null -+++ b/drivers/video/backlight/rpi_backlight.c -@@ -0,0 +1,119 @@ -+/* -+ * rpi_bl.c - Backlight controller through VPU -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+struct rpi_backlight { -+ struct device *dev; -+ struct device *fbdev; -+ struct rpi_firmware *fw; -+}; -+ -+static int rpi_backlight_update_status(struct backlight_device *bl) -+{ -+ struct rpi_backlight *gbl = bl_get_data(bl); -+ int brightness = bl->props.brightness; -+ int ret; -+ -+ if (bl->props.power != FB_BLANK_UNBLANK || -+ bl->props.fb_blank != FB_BLANK_UNBLANK || -+ bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK)) -+ brightness = 0; -+ -+ ret = rpi_firmware_property(gbl->fw, -+ RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT, -+ &brightness, sizeof(brightness)); -+ if (ret) { -+ dev_err(gbl->dev, "Failed to set brightness\n"); -+ return ret; -+ } -+ -+ if (brightness < 0) { -+ dev_err(gbl->dev, "Backlight change failed\n"); -+ return -EAGAIN; -+ } -+ -+ return 0; -+} -+ -+static const struct backlight_ops rpi_backlight_ops = { -+ .options = BL_CORE_SUSPENDRESUME, -+ .update_status = rpi_backlight_update_status, -+}; -+ -+static int rpi_backlight_probe(struct platform_device *pdev) -+{ -+ struct backlight_properties props; -+ struct backlight_device *bl; -+ struct rpi_backlight *gbl; -+ struct device_node *fw_node; -+ -+ gbl = devm_kzalloc(&pdev->dev, sizeof(*gbl), GFP_KERNEL); -+ if (gbl == NULL) -+ return -ENOMEM; -+ -+ gbl->dev = &pdev->dev; -+ -+ fw_node = of_parse_phandle(pdev->dev.of_node, "firmware", 0); -+ if (!fw_node) { -+ dev_err(&pdev->dev, "Missing firmware node\n"); -+ return -ENOENT; -+ } -+ -+ gbl->fw = rpi_firmware_get(fw_node); -+ if (!gbl->fw) -+ return -EPROBE_DEFER; -+ -+ memset(&props, 0, sizeof(props)); -+ props.type = BACKLIGHT_RAW; -+ props.max_brightness = 255; -+ bl = devm_backlight_device_register(&pdev->dev, dev_name(&pdev->dev), -+ &pdev->dev, gbl, &rpi_backlight_ops, -+ &props); -+ if (IS_ERR(bl)) { -+ dev_err(&pdev->dev, "failed to register backlight\n"); -+ return PTR_ERR(bl); -+ } -+ -+ bl->props.brightness = 255; -+ backlight_update_status(bl); -+ -+ platform_set_drvdata(pdev, bl); -+ return 0; -+} -+ -+static const struct of_device_id rpi_backlight_of_match[] = { -+ { .compatible = "raspberrypi,rpi-backlight" }, -+ { /* sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, rpi_backlight_of_match); -+ -+static struct platform_driver rpi_backlight_driver = { -+ .driver = { -+ .name = "rpi-backlight", -+ .of_match_table = of_match_ptr(rpi_backlight_of_match), -+ }, -+ .probe = rpi_backlight_probe, -+}; -+ -+module_platform_driver(rpi_backlight_driver); -+ -+MODULE_AUTHOR("Gordon Hollingworth "); -+MODULE_DESCRIPTION("Raspberry Pi mailbox based Backlight Driver"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/brcm2708/patches-4.9/0086-bcm2835-virtgpio-Virtual-GPIO-driver.patch b/target/linux/brcm2708/patches-4.9/0086-bcm2835-virtgpio-Virtual-GPIO-driver.patch deleted file mode 100644 index 425224e5a591..000000000000 --- a/target/linux/brcm2708/patches-4.9/0086-bcm2835-virtgpio-Virtual-GPIO-driver.patch +++ /dev/null @@ -1,267 +0,0 @@ -From 1b6bee75a64ca43404e6bc8ff2fdbe8b1d0a0423 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Tue, 23 Feb 2016 19:56:04 +0000 -Subject: [PATCH] bcm2835-virtgpio: Virtual GPIO driver - -Add a virtual GPIO driver that uses the firmware mailbox interface to -request that the VPU toggles LEDs. ---- - drivers/gpio/Kconfig | 6 + - drivers/gpio/Makefile | 1 + - drivers/gpio/gpio-bcm-virt.c | 214 +++++++++++++++++++++++++++++ - include/soc/bcm2835/raspberrypi-firmware.h | 1 + - 4 files changed, 222 insertions(+) - create mode 100644 drivers/gpio/gpio-bcm-virt.c - ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -134,6 +134,12 @@ config GPIO_BCM_KONA - help - Turn on GPIO support for Broadcom "Kona" chips. - -+config GPIO_BCM_VIRT -+ bool "Broadcom Virt GPIO" -+ depends on OF_GPIO && RASPBERRYPI_FIRMWARE && (ARCH_BCM2835 || COMPILE_TEST) -+ help -+ Turn on virtual GPIO support for Broadcom BCM283X chips. -+ - config GPIO_BRCMSTB - tristate "BRCMSTB GPIO support" - default y if (ARCH_BRCMSTB || BMIPS_GENERIC) ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -31,6 +31,7 @@ obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o - obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o - obj-$(CONFIG_GPIO_AXP209) += gpio-axp209.o - obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o -+obj-$(CONFIG_GPIO_BCM_VIRT) += gpio-bcm-virt.o - obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o - obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o - obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o ---- /dev/null -+++ b/drivers/gpio/gpio-bcm-virt.c -@@ -0,0 +1,214 @@ -+/* -+ * brcmvirt GPIO driver -+ * -+ * Copyright (C) 2012,2013 Dom Cobley -+ * Based on gpio-clps711x.c by Alexander Shiyan -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define MODULE_NAME "brcmvirt-gpio" -+#define NUM_GPIO 2 -+ -+struct brcmvirt_gpio { -+ struct gpio_chip gc; -+ u32 __iomem *ts_base; -+ /* two packed 16-bit counts of enabled and disables -+ Allows host to detect a brief enable that was missed */ -+ u32 enables_disables[NUM_GPIO]; -+ dma_addr_t bus_addr; -+}; -+ -+static int brcmvirt_gpio_dir_in(struct gpio_chip *gc, unsigned off) -+{ -+ struct brcmvirt_gpio *gpio; -+ gpio = container_of(gc, struct brcmvirt_gpio, gc); -+ return -EINVAL; -+} -+ -+static int brcmvirt_gpio_dir_out(struct gpio_chip *gc, unsigned off, int val) -+{ -+ struct brcmvirt_gpio *gpio; -+ gpio = container_of(gc, struct brcmvirt_gpio, gc); -+ return 0; -+} -+ -+static int brcmvirt_gpio_get(struct gpio_chip *gc, unsigned off) -+{ -+ struct brcmvirt_gpio *gpio; -+ unsigned v; -+ gpio = container_of(gc, struct brcmvirt_gpio, gc); -+ v = readl(gpio->ts_base + off); -+ return (v >> off) & 1; -+} -+ -+static void brcmvirt_gpio_set(struct gpio_chip *gc, unsigned off, int val) -+{ -+ struct brcmvirt_gpio *gpio; -+ u16 enables, disables; -+ s16 diff; -+ bool lit; -+ gpio = container_of(gc, struct brcmvirt_gpio, gc); -+ enables = gpio->enables_disables[off] >> 16; -+ disables = gpio->enables_disables[off] >> 0; -+ diff = (s16)(enables - disables); -+ lit = diff > 0; -+ if ((val && lit) || (!val && !lit)) -+ return; -+ if (val) -+ enables++; -+ else -+ disables++; -+ diff = (s16)(enables - disables); -+ BUG_ON(diff != 0 && diff != 1); -+ gpio->enables_disables[off] = (enables << 16) | (disables << 0); -+ writel(gpio->enables_disables[off], gpio->ts_base + off); -+} -+ -+static int brcmvirt_gpio_probe(struct platform_device *pdev) -+{ -+ int err = 0; -+ struct device *dev = &pdev->dev; -+ struct device_node *np = dev->of_node; -+ struct device_node *fw_node; -+ struct rpi_firmware *fw; -+ struct brcmvirt_gpio *ucb; -+ u32 gpiovirtbuf; -+ -+ fw_node = of_parse_phandle(np, "firmware", 0); -+ if (!fw_node) { -+ dev_err(dev, "Missing firmware node\n"); -+ return -ENOENT; -+ } -+ -+ fw = rpi_firmware_get(fw_node); -+ if (!fw) -+ return -EPROBE_DEFER; -+ -+ ucb = devm_kzalloc(dev, sizeof *ucb, GFP_KERNEL); -+ if (!ucb) { -+ err = -EINVAL; -+ goto out; -+ } -+ -+ ucb->ts_base = dma_zalloc_coherent(dev, PAGE_SIZE, &ucb->bus_addr, GFP_KERNEL); -+ if (!ucb->ts_base) { -+ pr_err("[%s]: failed to dma_alloc_coherent(%ld)\n", -+ __func__, PAGE_SIZE); -+ err = -ENOMEM; -+ goto out; -+ } -+ -+ gpiovirtbuf = (u32)ucb->bus_addr; -+ err = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_GPIOVIRTBUF, -+ &gpiovirtbuf, sizeof(gpiovirtbuf)); -+ -+ if (err || gpiovirtbuf != 0) { -+ dev_warn(dev, "Failed to set gpiovirtbuf, trying to get err:%x\n", err); -+ dma_free_coherent(dev, PAGE_SIZE, ucb->ts_base, ucb->bus_addr); -+ ucb->ts_base = 0; -+ ucb->bus_addr = 0; -+ } -+ -+ if (!ucb->ts_base) { -+ err = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_GET_GPIOVIRTBUF, -+ &gpiovirtbuf, sizeof(gpiovirtbuf)); -+ -+ if (err) { -+ dev_err(dev, "Failed to get gpiovirtbuf\n"); -+ goto out; -+ } -+ -+ if (!gpiovirtbuf) { -+ dev_err(dev, "No virtgpio buffer\n"); -+ err = -ENOENT; -+ goto out; -+ } -+ -+ // mmap the physical memory -+ gpiovirtbuf &= ~0xc0000000; -+ ucb->ts_base = ioremap(gpiovirtbuf, 4096); -+ if (ucb->ts_base == NULL) { -+ dev_err(dev, "Failed to map physical address\n"); -+ err = -ENOENT; -+ goto out; -+ } -+ ucb->bus_addr = 0; -+ } -+ ucb->gc.label = MODULE_NAME; -+ ucb->gc.owner = THIS_MODULE; -+ //ucb->gc.dev = dev; -+ ucb->gc.of_node = np; -+ ucb->gc.base = 100; -+ ucb->gc.ngpio = NUM_GPIO; -+ -+ ucb->gc.direction_input = brcmvirt_gpio_dir_in; -+ ucb->gc.direction_output = brcmvirt_gpio_dir_out; -+ ucb->gc.get = brcmvirt_gpio_get; -+ ucb->gc.set = brcmvirt_gpio_set; -+ ucb->gc.can_sleep = true; -+ -+ err = gpiochip_add(&ucb->gc); -+ if (err) -+ goto out; -+ -+ platform_set_drvdata(pdev, ucb); -+ -+ return 0; -+out: -+ if (ucb->bus_addr) { -+ dma_free_coherent(dev, PAGE_SIZE, ucb->ts_base, ucb->bus_addr); -+ ucb->bus_addr = 0; -+ ucb->ts_base = NULL; -+ } else if (ucb->ts_base) { -+ iounmap(ucb->ts_base); -+ ucb->ts_base = NULL; -+ } -+ return err; -+} -+ -+static int brcmvirt_gpio_remove(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ int err = 0; -+ struct brcmvirt_gpio *ucb = platform_get_drvdata(pdev); -+ -+ gpiochip_remove(&ucb->gc); -+ if (ucb->bus_addr) -+ dma_free_coherent(dev, PAGE_SIZE, ucb->ts_base, ucb->bus_addr); -+ else if (ucb->ts_base) -+ iounmap(ucb->ts_base); -+ return err; -+} -+ -+static const struct of_device_id __maybe_unused brcmvirt_gpio_ids[] = { -+ { .compatible = "brcm,bcm2835-virtgpio" }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, brcmvirt_gpio_ids); -+ -+static struct platform_driver brcmvirt_gpio_driver = { -+ .driver = { -+ .name = MODULE_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(brcmvirt_gpio_ids), -+ }, -+ .probe = brcmvirt_gpio_probe, -+ .remove = brcmvirt_gpio_remove, -+}; -+module_platform_driver(brcmvirt_gpio_driver); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Dom Cobley "); -+MODULE_DESCRIPTION("brcmvirt GPIO driver"); -+MODULE_ALIAS("platform:brcmvirt-gpio"); ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -116,6 +116,7 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, - RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, - RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f, -+ RPI_FIRMWARE_FRAMEBUFFER_SET_GPIOVIRTBUF = 0x00048020, - RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e, - RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f, - diff --git a/target/linux/brcm2708/patches-4.9/0087-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch b/target/linux/brcm2708/patches-4.9/0087-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch deleted file mode 100644 index 40963de8762b..000000000000 --- a/target/linux/brcm2708/patches-4.9/0087-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch +++ /dev/null @@ -1,29 +0,0 @@ -From b34475b447c7e97fa9c4a854849f6e856fe59931 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 23 Feb 2016 17:26:48 +0000 -Subject: [PATCH] amba_pl011: Don't use DT aliases for numbering - -The pl011 driver looks for DT aliases of the form "serial", -and if found uses as the device ID. This can cause -/dev/ttyAMA0 to become /dev/ttyAMA1, which is confusing if the -other serial port is provided by the 8250 driver which doesn't -use the same logic. ---- - drivers/tty/serial/amba-pl011.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/drivers/tty/serial/amba-pl011.c -+++ b/drivers/tty/serial/amba-pl011.c -@@ -2441,7 +2441,12 @@ static int pl011_setup_port(struct devic - if (IS_ERR(base)) - return PTR_ERR(base); - -+ /* Don't use DT serial aliases - it causes the device to -+ be renumbered to ttyAMA1 if it is the second serial port in the -+ system, even though the other one is ttyS0. The 8250 driver -+ doesn't use this logic, so always remains ttyS0. - index = pl011_probe_dt_alias(index, dev); -+ */ - - uap->old_cr = 0; - uap->port.dev = dev; diff --git a/target/linux/brcm2708/patches-4.9/0090-OF-DT-Overlay-configfs-interface.patch b/target/linux/brcm2708/patches-4.9/0090-OF-DT-Overlay-configfs-interface.patch deleted file mode 100644 index 941047adc5e2..000000000000 --- a/target/linux/brcm2708/patches-4.9/0090-OF-DT-Overlay-configfs-interface.patch +++ /dev/null @@ -1,424 +0,0 @@ -From ef4a8376af32bb6722e1ea933a9e1a83ebc8f175 Mon Sep 17 00:00:00 2001 -From: Pantelis Antoniou -Date: Wed, 3 Dec 2014 13:23:28 +0200 -Subject: [PATCH] OF: DT-Overlay configfs interface - -This is a port of Pantelis Antoniou's v3 port that makes use of the -new upstreamed configfs support for binary attributes. - -Original commit message: - -Add a runtime interface to using configfs for generic device tree overlay -usage. With it its possible to use device tree overlays without having -to use a per-platform overlay manager. - -Please see Documentation/devicetree/configfs-overlays.txt for more info. - -Changes since v2: -- Removed ifdef CONFIG_OF_OVERLAY (since for now it's required) -- Created a documentation entry -- Slight rewording in Kconfig - -Changes since v1: -- of_resolve() -> of_resolve_phandles(). - -Originally-signed-off-by: Pantelis Antoniou -Signed-off-by: Phil Elwell - -DT configfs: Fix build errors on other platforms - -Signed-off-by: Phil Elwell - -DT configfs: fix build error - -There is an error when compiling rpi-4.6.y branch: - CC drivers/of/configfs.o -drivers/of/configfs.c:291:21: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] - .default_groups = of_cfs_def_groups, - ^ -drivers/of/configfs.c:291:21: note: (near initialization for 'of_cfs_subsys.su_group.default_groups.next') - -The .default_groups is linked list since commit -1ae1602de028acaa42a0f6ff18d19756f8e825c6. -This commit uses configfs_add_default_group to fix this problem. - -Signed-off-by: Slawomir Stepien ---- - Documentation/devicetree/configfs-overlays.txt | 31 +++ - drivers/of/Kconfig | 7 + - drivers/of/Makefile | 1 + - drivers/of/configfs.c | 311 +++++++++++++++++++++++++ - 4 files changed, 350 insertions(+) - create mode 100644 Documentation/devicetree/configfs-overlays.txt - create mode 100644 drivers/of/configfs.c - ---- /dev/null -+++ b/Documentation/devicetree/configfs-overlays.txt -@@ -0,0 +1,31 @@ -+Howto use the configfs overlay interface. -+ -+A device-tree configfs entry is created in /config/device-tree/overlays -+and and it is manipulated using standard file system I/O. -+Note that this is a debug level interface, for use by developers and -+not necessarily something accessed by normal users due to the -+security implications of having direct access to the kernel's device tree. -+ -+* To create an overlay you mkdir the directory: -+ -+ # mkdir /config/device-tree/overlays/foo -+ -+* Either you echo the overlay firmware file to the path property file. -+ -+ # echo foo.dtbo >/config/device-tree/overlays/foo/path -+ -+* Or you cat the contents of the overlay to the dtbo file -+ -+ # cat foo.dtbo >/config/device-tree/overlays/foo/dtbo -+ -+The overlay file will be applied, and devices will be created/destroyed -+as required. -+ -+To remove it simply rmdir the directory. -+ -+ # rmdir /config/device-tree/overlays/foo -+ -+The rationalle of the dual interface (firmware & direct copy) is that each is -+better suited to different use patterns. The firmware interface is what's -+intended to be used by hardware managers in the kernel, while the copy interface -+make sense for developers (since it avoids problems with namespaces). ---- a/drivers/of/Kconfig -+++ b/drivers/of/Kconfig -@@ -112,4 +112,11 @@ config OF_OVERLAY - config OF_NUMA - bool - -+config OF_CONFIGFS -+ bool "Device Tree Overlay ConfigFS interface" -+ select CONFIGFS_FS -+ select OF_OVERLAY -+ help -+ Enable a simple user-space driven DT overlay interface. -+ - endif # OF ---- a/drivers/of/Makefile -+++ b/drivers/of/Makefile -@@ -1,4 +1,5 @@ - obj-y = base.o device.o platform.o -+obj-$(CONFIG_OF_CONFIGFS) += configfs.o - obj-$(CONFIG_OF_DYNAMIC) += dynamic.o - obj-$(CONFIG_OF_FLATTREE) += fdt.o - obj-$(CONFIG_OF_EARLY_FLATTREE) += fdt_address.o ---- /dev/null -+++ b/drivers/of/configfs.c -@@ -0,0 +1,311 @@ -+/* -+ * Configfs entries for device-tree -+ * -+ * Copyright (C) 2013 - Pantelis Antoniou -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "of_private.h" -+ -+struct cfs_overlay_item { -+ struct config_item item; -+ -+ char path[PATH_MAX]; -+ -+ const struct firmware *fw; -+ struct device_node *overlay; -+ int ov_id; -+ -+ void *dtbo; -+ int dtbo_size; -+}; -+ -+static int create_overlay(struct cfs_overlay_item *overlay, void *blob) -+{ -+ int err; -+ -+ /* unflatten the tree */ -+ of_fdt_unflatten_tree(blob, NULL, &overlay->overlay); -+ if (overlay->overlay == NULL) { -+ pr_err("%s: failed to unflatten tree\n", __func__); -+ err = -EINVAL; -+ goto out_err; -+ } -+ pr_debug("%s: unflattened OK\n", __func__); -+ -+ /* mark it as detached */ -+ of_node_set_flag(overlay->overlay, OF_DETACHED); -+ -+ /* perform resolution */ -+ err = of_resolve_phandles(overlay->overlay); -+ if (err != 0) { -+ pr_err("%s: Failed to resolve tree\n", __func__); -+ goto out_err; -+ } -+ pr_debug("%s: resolved OK\n", __func__); -+ -+ err = of_overlay_create(overlay->overlay); -+ if (err < 0) { -+ pr_err("%s: Failed to create overlay (err=%d)\n", -+ __func__, err); -+ goto out_err; -+ } -+ overlay->ov_id = err; -+ -+out_err: -+ return err; -+} -+ -+static inline struct cfs_overlay_item *to_cfs_overlay_item( -+ struct config_item *item) -+{ -+ return item ? container_of(item, struct cfs_overlay_item, item) : NULL; -+} -+ -+static ssize_t cfs_overlay_item_path_show(struct config_item *item, -+ char *page) -+{ -+ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); -+ return sprintf(page, "%s\n", overlay->path); -+} -+ -+static ssize_t cfs_overlay_item_path_store(struct config_item *item, -+ const char *page, size_t count) -+{ -+ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); -+ const char *p = page; -+ char *s; -+ int err; -+ -+ /* if it's set do not allow changes */ -+ if (overlay->path[0] != '\0' || overlay->dtbo_size > 0) -+ return -EPERM; -+ -+ /* copy to path buffer (and make sure it's always zero terminated */ -+ count = snprintf(overlay->path, sizeof(overlay->path) - 1, "%s", p); -+ overlay->path[sizeof(overlay->path) - 1] = '\0'; -+ -+ /* strip trailing newlines */ -+ s = overlay->path + strlen(overlay->path); -+ while (s > overlay->path && *--s == '\n') -+ *s = '\0'; -+ -+ pr_debug("%s: path is '%s'\n", __func__, overlay->path); -+ -+ err = request_firmware(&overlay->fw, overlay->path, NULL); -+ if (err != 0) -+ goto out_err; -+ -+ err = create_overlay(overlay, (void *)overlay->fw->data); -+ if (err != 0) -+ goto out_err; -+ -+ return count; -+ -+out_err: -+ -+ release_firmware(overlay->fw); -+ overlay->fw = NULL; -+ -+ overlay->path[0] = '\0'; -+ return err; -+} -+ -+static ssize_t cfs_overlay_item_status_show(struct config_item *item, -+ char *page) -+{ -+ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); -+ -+ return sprintf(page, "%s\n", -+ overlay->ov_id >= 0 ? "applied" : "unapplied"); -+} -+ -+CONFIGFS_ATTR(cfs_overlay_item_, path); -+CONFIGFS_ATTR_RO(cfs_overlay_item_, status); -+ -+static struct configfs_attribute *cfs_overlay_attrs[] = { -+ &cfs_overlay_item_attr_path, -+ &cfs_overlay_item_attr_status, -+ NULL, -+}; -+ -+ssize_t cfs_overlay_item_dtbo_read(struct config_item *item, -+ void *buf, size_t max_count) -+{ -+ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); -+ -+ pr_debug("%s: buf=%p max_count=%zu\n", __func__, -+ buf, max_count); -+ -+ if (overlay->dtbo == NULL) -+ return 0; -+ -+ /* copy if buffer provided */ -+ if (buf != NULL) { -+ /* the buffer must be large enough */ -+ if (overlay->dtbo_size > max_count) -+ return -ENOSPC; -+ -+ memcpy(buf, overlay->dtbo, overlay->dtbo_size); -+ } -+ -+ return overlay->dtbo_size; -+} -+ -+ssize_t cfs_overlay_item_dtbo_write(struct config_item *item, -+ const void *buf, size_t count) -+{ -+ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); -+ int err; -+ -+ /* if it's set do not allow changes */ -+ if (overlay->path[0] != '\0' || overlay->dtbo_size > 0) -+ return -EPERM; -+ -+ /* copy the contents */ -+ overlay->dtbo = kmemdup(buf, count, GFP_KERNEL); -+ if (overlay->dtbo == NULL) -+ return -ENOMEM; -+ -+ overlay->dtbo_size = count; -+ -+ err = create_overlay(overlay, overlay->dtbo); -+ if (err != 0) -+ goto out_err; -+ -+ return count; -+ -+out_err: -+ kfree(overlay->dtbo); -+ overlay->dtbo = NULL; -+ overlay->dtbo_size = 0; -+ -+ return err; -+} -+ -+CONFIGFS_BIN_ATTR(cfs_overlay_item_, dtbo, NULL, SZ_1M); -+ -+static struct configfs_bin_attribute *cfs_overlay_bin_attrs[] = { -+ &cfs_overlay_item_attr_dtbo, -+ NULL, -+}; -+ -+static void cfs_overlay_release(struct config_item *item) -+{ -+ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); -+ -+ if (overlay->ov_id >= 0) -+ of_overlay_destroy(overlay->ov_id); -+ if (overlay->fw) -+ release_firmware(overlay->fw); -+ /* kfree with NULL is safe */ -+ kfree(overlay->dtbo); -+ kfree(overlay); -+} -+ -+static struct configfs_item_operations cfs_overlay_item_ops = { -+ .release = cfs_overlay_release, -+}; -+ -+static struct config_item_type cfs_overlay_type = { -+ .ct_item_ops = &cfs_overlay_item_ops, -+ .ct_attrs = cfs_overlay_attrs, -+ .ct_bin_attrs = cfs_overlay_bin_attrs, -+ .ct_owner = THIS_MODULE, -+}; -+ -+static struct config_item *cfs_overlay_group_make_item( -+ struct config_group *group, const char *name) -+{ -+ struct cfs_overlay_item *overlay; -+ -+ overlay = kzalloc(sizeof(*overlay), GFP_KERNEL); -+ if (!overlay) -+ return ERR_PTR(-ENOMEM); -+ overlay->ov_id = -1; -+ -+ config_item_init_type_name(&overlay->item, name, &cfs_overlay_type); -+ return &overlay->item; -+} -+ -+static void cfs_overlay_group_drop_item(struct config_group *group, -+ struct config_item *item) -+{ -+ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); -+ -+ config_item_put(&overlay->item); -+} -+ -+static struct configfs_group_operations overlays_ops = { -+ .make_item = cfs_overlay_group_make_item, -+ .drop_item = cfs_overlay_group_drop_item, -+}; -+ -+static struct config_item_type overlays_type = { -+ .ct_group_ops = &overlays_ops, -+ .ct_owner = THIS_MODULE, -+}; -+ -+static struct configfs_group_operations of_cfs_ops = { -+ /* empty - we don't allow anything to be created */ -+}; -+ -+static struct config_item_type of_cfs_type = { -+ .ct_group_ops = &of_cfs_ops, -+ .ct_owner = THIS_MODULE, -+}; -+ -+struct config_group of_cfs_overlay_group; -+ -+static struct configfs_subsystem of_cfs_subsys = { -+ .su_group = { -+ .cg_item = { -+ .ci_namebuf = "device-tree", -+ .ci_type = &of_cfs_type, -+ }, -+ }, -+ .su_mutex = __MUTEX_INITIALIZER(of_cfs_subsys.su_mutex), -+}; -+ -+static int __init of_cfs_init(void) -+{ -+ int ret; -+ -+ pr_info("%s\n", __func__); -+ -+ config_group_init(&of_cfs_subsys.su_group); -+ config_group_init_type_name(&of_cfs_overlay_group, "overlays", -+ &overlays_type); -+ configfs_add_default_group(&of_cfs_overlay_group, -+ &of_cfs_subsys.su_group); -+ -+ ret = configfs_register_subsystem(&of_cfs_subsys); -+ if (ret != 0) { -+ pr_err("%s: failed to register subsys\n", __func__); -+ goto out; -+ } -+ pr_info("%s: OK\n", __func__); -+out: -+ return ret; -+} -+late_initcall(of_cfs_init); diff --git a/target/linux/brcm2708/patches-4.9/0092-hci_h5-Don-t-send-conf_req-when-ACTIVE.patch b/target/linux/brcm2708/patches-4.9/0092-hci_h5-Don-t-send-conf_req-when-ACTIVE.patch deleted file mode 100644 index 780a211c8c74..000000000000 --- a/target/linux/brcm2708/patches-4.9/0092-hci_h5-Don-t-send-conf_req-when-ACTIVE.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 0224b0469a7f5c2ee6420aac66e89e3206029633 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 17 Dec 2015 13:37:07 +0000 -Subject: [PATCH] hci_h5: Don't send conf_req when ACTIVE - -Without this patch, a modem and kernel can continuously bombard each -other with conf_req and conf_rsp messages, in a demented game of tag. ---- - drivers/bluetooth/hci_h5.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/bluetooth/hci_h5.c -+++ b/drivers/bluetooth/hci_h5.c -@@ -310,7 +310,8 @@ static void h5_handle_internal_rx(struct - h5_link_control(hu, conf_req, 3); - } else if (memcmp(data, conf_req, 2) == 0) { - h5_link_control(hu, conf_rsp, 2); -- h5_link_control(hu, conf_req, 3); -+ if (h5->state != H5_ACTIVE) -+ h5_link_control(hu, conf_req, 3); - } else if (memcmp(data, conf_rsp, 2) == 0) { - if (H5_HDR_LEN(hdr) > 2) - h5->tx_win = (data[2] & 0x07); diff --git a/target/linux/brcm2708/patches-4.9/0093-config-Add-default-configs.patch b/target/linux/brcm2708/patches-4.9/0093-config-Add-default-configs.patch deleted file mode 100644 index da92f04b4c92..000000000000 --- a/target/linux/brcm2708/patches-4.9/0093-config-Add-default-configs.patch +++ /dev/null @@ -1,2623 +0,0 @@ -From 9455097dbb0c961edb6a47b451e18a985f5d9a3f Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Mon, 13 Apr 2015 17:16:29 +0100 -Subject: [PATCH] config: Add default configs - ---- - arch/arm/configs/bcm2709_defconfig | 1297 +++++++++++++++++++++++++++++++++++ - arch/arm/configs/bcmrpi_defconfig | 1308 ++++++++++++++++++++++++++++++++++++ - 2 files changed, 2605 insertions(+) - create mode 100644 arch/arm/configs/bcm2709_defconfig - create mode 100644 arch/arm/configs/bcmrpi_defconfig - ---- /dev/null -+++ b/arch/arm/configs/bcm2709_defconfig -@@ -0,0 +1,1297 @@ -+CONFIG_LOCALVERSION="-v7" -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SYSVIPC=y -+CONFIG_POSIX_MQUEUE=y -+CONFIG_NO_HZ=y -+CONFIG_HIGH_RES_TIMERS=y -+CONFIG_BSD_PROCESS_ACCT=y -+CONFIG_BSD_PROCESS_ACCT_V3=y -+CONFIG_TASKSTATS=y -+CONFIG_TASK_DELAY_ACCT=y -+CONFIG_TASK_XACCT=y -+CONFIG_TASK_IO_ACCOUNTING=y -+CONFIG_IKCONFIG=m -+CONFIG_IKCONFIG_PROC=y -+CONFIG_NMI_LOG_BUF_SHIFT=12 -+CONFIG_MEMCG=y -+CONFIG_BLK_CGROUP=y -+CONFIG_CGROUP_FREEZER=y -+CONFIG_CPUSETS=y -+CONFIG_CGROUP_DEVICE=y -+CONFIG_CGROUP_CPUACCT=y -+CONFIG_NAMESPACES=y -+CONFIG_USER_NS=y -+CONFIG_SCHED_AUTOGROUP=y -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_EMBEDDED=y -+# CONFIG_COMPAT_BRK is not set -+CONFIG_PROFILING=y -+CONFIG_OPROFILE=m -+CONFIG_KPROBES=y -+CONFIG_JUMP_LABEL=y -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODVERSIONS=y -+CONFIG_MODULE_SRCVERSION_ALL=y -+CONFIG_BLK_DEV_THROTTLING=y -+CONFIG_PARTITION_ADVANCED=y -+CONFIG_MAC_PARTITION=y -+CONFIG_CFQ_GROUP_IOSCHED=y -+CONFIG_ARCH_BCM=y -+CONFIG_ARCH_BCM2835=y -+# CONFIG_CACHE_L2X0 is not set -+CONFIG_SMP=y -+CONFIG_VMSPLIT_2G=y -+CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_AEABI=y -+# CONFIG_CPU_SW_DOMAIN_PAN is not set -+CONFIG_CLEANCACHE=y -+CONFIG_FRONTSWAP=y -+CONFIG_CMA=y -+CONFIG_ZSMALLOC=m -+CONFIG_PGTABLE_MAPPING=y -+CONFIG_UACCESS_WITH_MEMCPY=y -+CONFIG_SECCOMP=y -+# CONFIG_ATAGS is not set -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" -+CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_STAT=y -+CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y -+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -+CONFIG_CPU_FREQ_GOV_USERSPACE=y -+CONFIG_CPU_FREQ_GOV_ONDEMAND=y -+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y -+CONFIG_VFP=y -+CONFIG_NEON=y -+CONFIG_KERNEL_MODE_NEON=y -+CONFIG_BINFMT_MISC=m -+# CONFIG_SUSPEND is not set -+CONFIG_PM=y -+CONFIG_NET=y -+CONFIG_PACKET=y -+CONFIG_UNIX=y -+CONFIG_XFRM_USER=y -+CONFIG_NET_KEY=m -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_ADVANCED_ROUTER=y -+CONFIG_IP_MULTIPLE_TABLES=y -+CONFIG_IP_ROUTE_MULTIPATH=y -+CONFIG_IP_ROUTE_VERBOSE=y -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+CONFIG_IP_PNP_RARP=y -+CONFIG_NET_IPIP=m -+CONFIG_NET_IPGRE_DEMUX=m -+CONFIG_NET_IPGRE=m -+CONFIG_IP_MROUTE=y -+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y -+CONFIG_IP_PIMSM_V1=y -+CONFIG_IP_PIMSM_V2=y -+CONFIG_SYN_COOKIES=y -+CONFIG_INET_AH=m -+CONFIG_INET_ESP=m -+CONFIG_INET_IPCOMP=m -+CONFIG_INET_XFRM_MODE_TRANSPORT=m -+CONFIG_INET_XFRM_MODE_TUNNEL=m -+CONFIG_INET_XFRM_MODE_BEET=m -+CONFIG_INET_DIAG=m -+CONFIG_IPV6=m -+CONFIG_IPV6_ROUTER_PREF=y -+CONFIG_INET6_AH=m -+CONFIG_INET6_ESP=m -+CONFIG_INET6_IPCOMP=m -+CONFIG_IPV6_TUNNEL=m -+CONFIG_IPV6_MULTIPLE_TABLES=y -+CONFIG_IPV6_SUBTREES=y -+CONFIG_IPV6_MROUTE=y -+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y -+CONFIG_IPV6_PIMSM_V2=y -+CONFIG_NETFILTER=y -+CONFIG_NF_CONNTRACK=m -+CONFIG_NF_CONNTRACK_ZONES=y -+CONFIG_NF_CONNTRACK_EVENTS=y -+CONFIG_NF_CONNTRACK_TIMESTAMP=y -+CONFIG_NF_CT_PROTO_DCCP=m -+CONFIG_NF_CT_PROTO_UDPLITE=m -+CONFIG_NF_CONNTRACK_AMANDA=m -+CONFIG_NF_CONNTRACK_FTP=m -+CONFIG_NF_CONNTRACK_H323=m -+CONFIG_NF_CONNTRACK_IRC=m -+CONFIG_NF_CONNTRACK_NETBIOS_NS=m -+CONFIG_NF_CONNTRACK_SNMP=m -+CONFIG_NF_CONNTRACK_PPTP=m -+CONFIG_NF_CONNTRACK_SANE=m -+CONFIG_NF_CONNTRACK_SIP=m -+CONFIG_NF_CONNTRACK_TFTP=m -+CONFIG_NF_CT_NETLINK=m -+CONFIG_NETFILTER_XT_SET=m -+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m -+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -+CONFIG_NETFILTER_XT_TARGET_DSCP=m -+CONFIG_NETFILTER_XT_TARGET_HMARK=m -+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m -+CONFIG_NETFILTER_XT_TARGET_LED=m -+CONFIG_NETFILTER_XT_TARGET_LOG=m -+CONFIG_NETFILTER_XT_TARGET_MARK=m -+CONFIG_NETFILTER_XT_TARGET_NFLOG=m -+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m -+CONFIG_NETFILTER_XT_TARGET_TEE=m -+CONFIG_NETFILTER_XT_TARGET_TPROXY=m -+CONFIG_NETFILTER_XT_TARGET_TRACE=m -+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m -+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m -+CONFIG_NETFILTER_XT_MATCH_BPF=m -+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -+CONFIG_NETFILTER_XT_MATCH_COMMENT=m -+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m -+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -+CONFIG_NETFILTER_XT_MATCH_CPU=m -+CONFIG_NETFILTER_XT_MATCH_DCCP=m -+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m -+CONFIG_NETFILTER_XT_MATCH_DSCP=m -+CONFIG_NETFILTER_XT_MATCH_ESP=m -+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -+CONFIG_NETFILTER_XT_MATCH_HELPER=m -+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -+CONFIG_NETFILTER_XT_MATCH_IPVS=m -+CONFIG_NETFILTER_XT_MATCH_LENGTH=m -+CONFIG_NETFILTER_XT_MATCH_LIMIT=m -+CONFIG_NETFILTER_XT_MATCH_MAC=m -+CONFIG_NETFILTER_XT_MATCH_MARK=m -+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -+CONFIG_NETFILTER_XT_MATCH_NFACCT=m -+CONFIG_NETFILTER_XT_MATCH_OSF=m -+CONFIG_NETFILTER_XT_MATCH_OWNER=m -+CONFIG_NETFILTER_XT_MATCH_POLICY=m -+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -+CONFIG_NETFILTER_XT_MATCH_QUOTA=m -+CONFIG_NETFILTER_XT_MATCH_RATEEST=m -+CONFIG_NETFILTER_XT_MATCH_REALM=m -+CONFIG_NETFILTER_XT_MATCH_RECENT=m -+CONFIG_NETFILTER_XT_MATCH_SOCKET=m -+CONFIG_NETFILTER_XT_MATCH_STATE=m -+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -+CONFIG_NETFILTER_XT_MATCH_STRING=m -+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -+CONFIG_NETFILTER_XT_MATCH_TIME=m -+CONFIG_NETFILTER_XT_MATCH_U32=m -+CONFIG_IP_SET=m -+CONFIG_IP_SET_BITMAP_IP=m -+CONFIG_IP_SET_BITMAP_IPMAC=m -+CONFIG_IP_SET_BITMAP_PORT=m -+CONFIG_IP_SET_HASH_IP=m -+CONFIG_IP_SET_HASH_IPPORT=m -+CONFIG_IP_SET_HASH_IPPORTIP=m -+CONFIG_IP_SET_HASH_IPPORTNET=m -+CONFIG_IP_SET_HASH_NET=m -+CONFIG_IP_SET_HASH_NETPORT=m -+CONFIG_IP_SET_HASH_NETIFACE=m -+CONFIG_IP_SET_LIST_SET=m -+CONFIG_IP_VS=m -+CONFIG_IP_VS_PROTO_TCP=y -+CONFIG_IP_VS_PROTO_UDP=y -+CONFIG_IP_VS_PROTO_ESP=y -+CONFIG_IP_VS_PROTO_AH=y -+CONFIG_IP_VS_PROTO_SCTP=y -+CONFIG_IP_VS_RR=m -+CONFIG_IP_VS_WRR=m -+CONFIG_IP_VS_LC=m -+CONFIG_IP_VS_WLC=m -+CONFIG_IP_VS_LBLC=m -+CONFIG_IP_VS_LBLCR=m -+CONFIG_IP_VS_DH=m -+CONFIG_IP_VS_SH=m -+CONFIG_IP_VS_SED=m -+CONFIG_IP_VS_NQ=m -+CONFIG_IP_VS_FTP=m -+CONFIG_IP_VS_PE_SIP=m -+CONFIG_NF_CONNTRACK_IPV4=m -+CONFIG_IP_NF_IPTABLES=m -+CONFIG_IP_NF_MATCH_AH=m -+CONFIG_IP_NF_MATCH_ECN=m -+CONFIG_IP_NF_MATCH_RPFILTER=m -+CONFIG_IP_NF_MATCH_TTL=m -+CONFIG_IP_NF_FILTER=m -+CONFIG_IP_NF_TARGET_REJECT=m -+CONFIG_IP_NF_NAT=m -+CONFIG_IP_NF_TARGET_MASQUERADE=m -+CONFIG_IP_NF_TARGET_NETMAP=m -+CONFIG_IP_NF_TARGET_REDIRECT=m -+CONFIG_IP_NF_MANGLE=m -+CONFIG_IP_NF_TARGET_CLUSTERIP=m -+CONFIG_IP_NF_TARGET_ECN=m -+CONFIG_IP_NF_TARGET_TTL=m -+CONFIG_IP_NF_RAW=m -+CONFIG_IP_NF_ARPTABLES=m -+CONFIG_IP_NF_ARPFILTER=m -+CONFIG_IP_NF_ARP_MANGLE=m -+CONFIG_NF_CONNTRACK_IPV6=m -+CONFIG_IP6_NF_IPTABLES=m -+CONFIG_IP6_NF_MATCH_AH=m -+CONFIG_IP6_NF_MATCH_EUI64=m -+CONFIG_IP6_NF_MATCH_FRAG=m -+CONFIG_IP6_NF_MATCH_OPTS=m -+CONFIG_IP6_NF_MATCH_HL=m -+CONFIG_IP6_NF_MATCH_IPV6HEADER=m -+CONFIG_IP6_NF_MATCH_MH=m -+CONFIG_IP6_NF_MATCH_RPFILTER=m -+CONFIG_IP6_NF_MATCH_RT=m -+CONFIG_IP6_NF_TARGET_HL=m -+CONFIG_IP6_NF_FILTER=m -+CONFIG_IP6_NF_TARGET_REJECT=m -+CONFIG_IP6_NF_MANGLE=m -+CONFIG_IP6_NF_RAW=m -+CONFIG_IP6_NF_NAT=m -+CONFIG_IP6_NF_TARGET_MASQUERADE=m -+CONFIG_IP6_NF_TARGET_NPT=m -+CONFIG_BRIDGE_NF_EBTABLES=m -+CONFIG_BRIDGE_EBT_BROUTE=m -+CONFIG_BRIDGE_EBT_T_FILTER=m -+CONFIG_BRIDGE_EBT_T_NAT=m -+CONFIG_BRIDGE_EBT_802_3=m -+CONFIG_BRIDGE_EBT_AMONG=m -+CONFIG_BRIDGE_EBT_ARP=m -+CONFIG_BRIDGE_EBT_IP=m -+CONFIG_BRIDGE_EBT_IP6=m -+CONFIG_BRIDGE_EBT_LIMIT=m -+CONFIG_BRIDGE_EBT_MARK=m -+CONFIG_BRIDGE_EBT_PKTTYPE=m -+CONFIG_BRIDGE_EBT_STP=m -+CONFIG_BRIDGE_EBT_VLAN=m -+CONFIG_BRIDGE_EBT_ARPREPLY=m -+CONFIG_BRIDGE_EBT_DNAT=m -+CONFIG_BRIDGE_EBT_MARK_T=m -+CONFIG_BRIDGE_EBT_REDIRECT=m -+CONFIG_BRIDGE_EBT_SNAT=m -+CONFIG_BRIDGE_EBT_LOG=m -+CONFIG_BRIDGE_EBT_NFLOG=m -+CONFIG_SCTP_COOKIE_HMAC_SHA1=y -+CONFIG_ATM=m -+CONFIG_L2TP=m -+CONFIG_L2TP_V3=y -+CONFIG_L2TP_IP=m -+CONFIG_L2TP_ETH=m -+CONFIG_BRIDGE=m -+CONFIG_VLAN_8021Q=m -+CONFIG_VLAN_8021Q_GVRP=y -+CONFIG_ATALK=m -+CONFIG_6LOWPAN=m -+CONFIG_IEEE802154=m -+CONFIG_IEEE802154_6LOWPAN=m -+CONFIG_MAC802154=m -+CONFIG_NET_SCHED=y -+CONFIG_NET_SCH_CBQ=m -+CONFIG_NET_SCH_HTB=m -+CONFIG_NET_SCH_HFSC=m -+CONFIG_NET_SCH_PRIO=m -+CONFIG_NET_SCH_MULTIQ=m -+CONFIG_NET_SCH_RED=m -+CONFIG_NET_SCH_SFB=m -+CONFIG_NET_SCH_SFQ=m -+CONFIG_NET_SCH_TEQL=m -+CONFIG_NET_SCH_TBF=m -+CONFIG_NET_SCH_GRED=m -+CONFIG_NET_SCH_DSMARK=m -+CONFIG_NET_SCH_NETEM=m -+CONFIG_NET_SCH_DRR=m -+CONFIG_NET_SCH_MQPRIO=m -+CONFIG_NET_SCH_CHOKE=m -+CONFIG_NET_SCH_QFQ=m -+CONFIG_NET_SCH_CODEL=m -+CONFIG_NET_SCH_FQ_CODEL=m -+CONFIG_NET_SCH_INGRESS=m -+CONFIG_NET_SCH_PLUG=m -+CONFIG_NET_CLS_BASIC=m -+CONFIG_NET_CLS_TCINDEX=m -+CONFIG_NET_CLS_ROUTE4=m -+CONFIG_NET_CLS_FW=m -+CONFIG_NET_CLS_U32=m -+CONFIG_CLS_U32_MARK=y -+CONFIG_NET_CLS_RSVP=m -+CONFIG_NET_CLS_RSVP6=m -+CONFIG_NET_CLS_FLOW=m -+CONFIG_NET_CLS_CGROUP=m -+CONFIG_NET_EMATCH=y -+CONFIG_NET_EMATCH_CMP=m -+CONFIG_NET_EMATCH_NBYTE=m -+CONFIG_NET_EMATCH_U32=m -+CONFIG_NET_EMATCH_META=m -+CONFIG_NET_EMATCH_TEXT=m -+CONFIG_NET_EMATCH_IPSET=m -+CONFIG_NET_CLS_ACT=y -+CONFIG_NET_ACT_POLICE=m -+CONFIG_NET_ACT_GACT=m -+CONFIG_GACT_PROB=y -+CONFIG_NET_ACT_MIRRED=m -+CONFIG_NET_ACT_IPT=m -+CONFIG_NET_ACT_NAT=m -+CONFIG_NET_ACT_PEDIT=m -+CONFIG_NET_ACT_SIMP=m -+CONFIG_NET_ACT_SKBEDIT=m -+CONFIG_NET_ACT_CSUM=m -+CONFIG_BATMAN_ADV=m -+CONFIG_OPENVSWITCH=m -+CONFIG_NET_PKTGEN=m -+CONFIG_HAMRADIO=y -+CONFIG_AX25=m -+CONFIG_NETROM=m -+CONFIG_ROSE=m -+CONFIG_MKISS=m -+CONFIG_6PACK=m -+CONFIG_BPQETHER=m -+CONFIG_BAYCOM_SER_FDX=m -+CONFIG_BAYCOM_SER_HDX=m -+CONFIG_YAM=m -+CONFIG_CAN=m -+CONFIG_CAN_VCAN=m -+CONFIG_CAN_MCP251X=m -+CONFIG_IRDA=m -+CONFIG_IRLAN=m -+CONFIG_IRNET=m -+CONFIG_IRCOMM=m -+CONFIG_IRDA_ULTRA=y -+CONFIG_IRDA_CACHE_LAST_LSAP=y -+CONFIG_IRDA_FAST_RR=y -+CONFIG_IRTTY_SIR=m -+CONFIG_KINGSUN_DONGLE=m -+CONFIG_KSDAZZLE_DONGLE=m -+CONFIG_KS959_DONGLE=m -+CONFIG_USB_IRDA=m -+CONFIG_SIGMATEL_FIR=m -+CONFIG_MCS_FIR=m -+CONFIG_BT=m -+CONFIG_BT_RFCOMM=m -+CONFIG_BT_RFCOMM_TTY=y -+CONFIG_BT_BNEP=m -+CONFIG_BT_BNEP_MC_FILTER=y -+CONFIG_BT_BNEP_PROTO_FILTER=y -+CONFIG_BT_HIDP=m -+CONFIG_BT_6LOWPAN=m -+CONFIG_BT_HCIBTUSB=m -+CONFIG_BT_HCIUART=m -+CONFIG_BT_HCIUART_3WIRE=y -+CONFIG_BT_HCIUART_BCM=y -+CONFIG_BT_HCIBCM203X=m -+CONFIG_BT_HCIBPA10X=m -+CONFIG_BT_HCIBFUSB=m -+CONFIG_BT_HCIVHCI=m -+CONFIG_BT_MRVL=m -+CONFIG_BT_MRVL_SDIO=m -+CONFIG_BT_ATH3K=m -+CONFIG_BT_WILINK=m -+CONFIG_CFG80211=m -+CONFIG_MAC80211=m -+CONFIG_MAC80211_MESH=y -+CONFIG_WIMAX=m -+CONFIG_RFKILL=m -+CONFIG_RFKILL_INPUT=y -+CONFIG_NET_9P=m -+CONFIG_NFC=m -+CONFIG_DEVTMPFS=y -+CONFIG_DEVTMPFS_MOUNT=y -+CONFIG_DMA_CMA=y -+CONFIG_CMA_SIZE_MBYTES=5 -+CONFIG_MTD=m -+CONFIG_MTD_BLOCK=m -+CONFIG_MTD_NAND=m -+CONFIG_MTD_UBI=m -+CONFIG_OF_CONFIGFS=y -+CONFIG_ZRAM=m -+CONFIG_BLK_DEV_LOOP=y -+CONFIG_BLK_DEV_CRYPTOLOOP=m -+CONFIG_BLK_DEV_DRBD=m -+CONFIG_BLK_DEV_NBD=m -+CONFIG_BLK_DEV_RAM=y -+CONFIG_CDROM_PKTCDVD=m -+CONFIG_ATA_OVER_ETH=m -+CONFIG_EEPROM_AT24=m -+CONFIG_TI_ST=m -+CONFIG_SCSI=y -+# CONFIG_SCSI_PROC_FS is not set -+CONFIG_BLK_DEV_SD=y -+CONFIG_CHR_DEV_ST=m -+CONFIG_CHR_DEV_OSST=m -+CONFIG_BLK_DEV_SR=m -+CONFIG_CHR_DEV_SG=m -+CONFIG_SCSI_ISCSI_ATTRS=y -+CONFIG_ISCSI_TCP=m -+CONFIG_ISCSI_BOOT_SYSFS=m -+CONFIG_MD=y -+CONFIG_MD_LINEAR=m -+CONFIG_MD_RAID0=m -+CONFIG_BLK_DEV_DM=m -+CONFIG_DM_CRYPT=m -+CONFIG_DM_SNAPSHOT=m -+CONFIG_DM_THIN_PROVISIONING=m -+CONFIG_DM_MIRROR=m -+CONFIG_DM_LOG_USERSPACE=m -+CONFIG_DM_RAID=m -+CONFIG_DM_ZERO=m -+CONFIG_DM_DELAY=m -+CONFIG_NETDEVICES=y -+CONFIG_BONDING=m -+CONFIG_DUMMY=m -+CONFIG_IFB=m -+CONFIG_MACVLAN=m -+CONFIG_VXLAN=m -+CONFIG_NETCONSOLE=m -+CONFIG_TUN=m -+CONFIG_VETH=m -+CONFIG_ENC28J60=m -+CONFIG_QCA7000=m -+CONFIG_MDIO_BITBANG=m -+CONFIG_PPP=m -+CONFIG_PPP_BSDCOMP=m -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_FILTER=y -+CONFIG_PPP_MPPE=m -+CONFIG_PPP_MULTILINK=y -+CONFIG_PPPOATM=m -+CONFIG_PPPOE=m -+CONFIG_PPPOL2TP=m -+CONFIG_PPP_ASYNC=m -+CONFIG_PPP_SYNC_TTY=m -+CONFIG_SLIP=m -+CONFIG_SLIP_COMPRESSED=y -+CONFIG_SLIP_SMART=y -+CONFIG_USB_CATC=m -+CONFIG_USB_KAWETH=m -+CONFIG_USB_PEGASUS=m -+CONFIG_USB_RTL8150=m -+CONFIG_USB_RTL8152=m -+CONFIG_USB_USBNET=y -+CONFIG_USB_NET_AX8817X=m -+CONFIG_USB_NET_AX88179_178A=m -+CONFIG_USB_NET_CDCETHER=m -+CONFIG_USB_NET_CDC_EEM=m -+CONFIG_USB_NET_CDC_NCM=m -+CONFIG_USB_NET_HUAWEI_CDC_NCM=m -+CONFIG_USB_NET_CDC_MBIM=m -+CONFIG_USB_NET_DM9601=m -+CONFIG_USB_NET_SR9700=m -+CONFIG_USB_NET_SR9800=m -+CONFIG_USB_NET_SMSC75XX=m -+CONFIG_USB_NET_SMSC95XX=y -+CONFIG_USB_NET_GL620A=m -+CONFIG_USB_NET_NET1080=m -+CONFIG_USB_NET_PLUSB=m -+CONFIG_USB_NET_MCS7830=m -+CONFIG_USB_NET_CDC_SUBSET=m -+CONFIG_USB_ALI_M5632=y -+CONFIG_USB_AN2720=y -+CONFIG_USB_EPSON2888=y -+CONFIG_USB_KC2190=y -+CONFIG_USB_NET_ZAURUS=m -+CONFIG_USB_NET_CX82310_ETH=m -+CONFIG_USB_NET_KALMIA=m -+CONFIG_USB_NET_QMI_WWAN=m -+CONFIG_USB_HSO=m -+CONFIG_USB_NET_INT51X1=m -+CONFIG_USB_IPHETH=m -+CONFIG_USB_SIERRA_NET=m -+CONFIG_USB_VL600=m -+CONFIG_ATH9K=m -+CONFIG_ATH9K_HTC=m -+CONFIG_CARL9170=m -+CONFIG_ATH6KL=m -+CONFIG_ATH6KL_USB=m -+CONFIG_AR5523=m -+CONFIG_AT76C50X_USB=m -+CONFIG_B43=m -+# CONFIG_B43_PHY_N is not set -+CONFIG_B43LEGACY=m -+CONFIG_BRCMFMAC=m -+CONFIG_BRCMFMAC_USB=y -+CONFIG_HOSTAP=m -+CONFIG_P54_COMMON=m -+CONFIG_P54_USB=m -+CONFIG_LIBERTAS=m -+CONFIG_LIBERTAS_USB=m -+CONFIG_LIBERTAS_SDIO=m -+CONFIG_LIBERTAS_THINFIRM=m -+CONFIG_LIBERTAS_THINFIRM_USB=m -+CONFIG_MWIFIEX=m -+CONFIG_MWIFIEX_SDIO=m -+CONFIG_MT7601U=m -+CONFIG_RT2X00=m -+CONFIG_RT2500USB=m -+CONFIG_RT73USB=m -+CONFIG_RT2800USB=m -+CONFIG_RT2800USB_RT3573=y -+CONFIG_RT2800USB_RT53XX=y -+CONFIG_RT2800USB_RT55XX=y -+CONFIG_RT2800USB_UNKNOWN=y -+CONFIG_RTL8187=m -+CONFIG_RTL8192CU=m -+CONFIG_USB_ZD1201=m -+CONFIG_ZD1211RW=m -+CONFIG_MAC80211_HWSIM=m -+CONFIG_USB_NET_RNDIS_WLAN=m -+CONFIG_WIMAX_I2400M_USB=m -+CONFIG_IEEE802154_AT86RF230=m -+CONFIG_IEEE802154_MRF24J40=m -+CONFIG_IEEE802154_CC2520=m -+CONFIG_INPUT_POLLDEV=m -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_JOYDEV=m -+CONFIG_INPUT_EVDEV=m -+# CONFIG_KEYBOARD_ATKBD is not set -+CONFIG_KEYBOARD_GPIO=m -+# CONFIG_INPUT_MOUSE is not set -+CONFIG_INPUT_JOYSTICK=y -+CONFIG_JOYSTICK_IFORCE=m -+CONFIG_JOYSTICK_IFORCE_USB=y -+CONFIG_JOYSTICK_XPAD=m -+CONFIG_JOYSTICK_XPAD_FF=y -+CONFIG_JOYSTICK_XPAD_LEDS=y -+CONFIG_JOYSTICK_RPISENSE=m -+CONFIG_INPUT_TOUCHSCREEN=y -+CONFIG_TOUCHSCREEN_ADS7846=m -+CONFIG_TOUCHSCREEN_EGALAX=m -+CONFIG_TOUCHSCREEN_EKTF2127=m -+CONFIG_TOUCHSCREEN_RPI_FT5406=m -+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m -+CONFIG_TOUCHSCREEN_STMPE=m -+CONFIG_INPUT_MISC=y -+CONFIG_INPUT_AD714X=m -+CONFIG_INPUT_ATI_REMOTE2=m -+CONFIG_INPUT_KEYSPAN_REMOTE=m -+CONFIG_INPUT_POWERMATE=m -+CONFIG_INPUT_YEALINK=m -+CONFIG_INPUT_CM109=m -+CONFIG_INPUT_UINPUT=m -+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -+CONFIG_INPUT_ADXL34X=m -+CONFIG_INPUT_CMA3000=m -+CONFIG_SERIO=m -+CONFIG_SERIO_RAW=m -+CONFIG_GAMEPORT=m -+CONFIG_GAMEPORT_NS558=m -+CONFIG_GAMEPORT_L4=m -+CONFIG_BRCM_CHAR_DRIVERS=y -+CONFIG_BCM_VC_CMA=y -+CONFIG_BCM_VCIO=y -+CONFIG_BCM_VC_SM=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_DEVKMEM is not set -+CONFIG_SERIAL_8250=y -+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -+CONFIG_SERIAL_8250_CONSOLE=y -+# CONFIG_SERIAL_8250_DMA is not set -+CONFIG_SERIAL_8250_NR_UARTS=1 -+CONFIG_SERIAL_8250_RUNTIME_UARTS=0 -+CONFIG_SERIAL_8250_EXTENDED=y -+CONFIG_SERIAL_8250_SHARE_IRQ=y -+CONFIG_SERIAL_8250_BCM2835AUX=y -+CONFIG_SERIAL_OF_PLATFORM=y -+CONFIG_SERIAL_AMBA_PL011=y -+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -+CONFIG_SERIAL_SC16IS7XX=m -+CONFIG_SERIAL_SC16IS7XX_SPI=y -+CONFIG_TTY_PRINTK=y -+CONFIG_HW_RANDOM=y -+CONFIG_RAW_DRIVER=y -+CONFIG_I2C=y -+CONFIG_I2C_CHARDEV=m -+CONFIG_I2C_MUX_PCA954x=m -+CONFIG_I2C_BCM2708=m -+CONFIG_I2C_BCM2835=m -+CONFIG_I2C_GPIO=m -+CONFIG_SPI=y -+CONFIG_SPI_BCM2835=m -+CONFIG_SPI_BCM2835AUX=m -+CONFIG_SPI_SPIDEV=y -+CONFIG_PPS=m -+CONFIG_PPS_CLIENT_LDISC=m -+CONFIG_PPS_CLIENT_GPIO=m -+CONFIG_GPIO_SYSFS=y -+CONFIG_GPIO_BCM_VIRT=y -+CONFIG_GPIO_ARIZONA=m -+CONFIG_GPIO_STMPE=y -+CONFIG_GPIO_MCP23S08=m -+CONFIG_W1=m -+CONFIG_W1_MASTER_DS2490=m -+CONFIG_W1_MASTER_DS2482=m -+CONFIG_W1_MASTER_DS1WM=m -+CONFIG_W1_MASTER_GPIO=m -+CONFIG_W1_SLAVE_THERM=m -+CONFIG_W1_SLAVE_SMEM=m -+CONFIG_W1_SLAVE_DS2408=m -+CONFIG_W1_SLAVE_DS2413=m -+CONFIG_W1_SLAVE_DS2406=m -+CONFIG_W1_SLAVE_DS2423=m -+CONFIG_W1_SLAVE_DS2431=m -+CONFIG_W1_SLAVE_DS2433=m -+CONFIG_W1_SLAVE_DS2760=m -+CONFIG_W1_SLAVE_DS2780=m -+CONFIG_W1_SLAVE_DS2781=m -+CONFIG_W1_SLAVE_DS28E04=m -+CONFIG_W1_SLAVE_BQ27000=m -+CONFIG_POWER_RESET=y -+CONFIG_POWER_RESET_GPIO=y -+CONFIG_BATTERY_DS2760=m -+CONFIG_HWMON=m -+CONFIG_SENSORS_LM75=m -+CONFIG_SENSORS_SHT21=m -+CONFIG_SENSORS_SHTC1=m -+CONFIG_SENSORS_INA2XX=m -+CONFIG_THERMAL=y -+CONFIG_THERMAL_BCM2835=y -+CONFIG_WATCHDOG=y -+CONFIG_BCM2835_WDT=y -+CONFIG_UCB1400_CORE=m -+CONFIG_MFD_STMPE=y -+CONFIG_STMPE_SPI=y -+CONFIG_MFD_ARIZONA_I2C=m -+CONFIG_MFD_ARIZONA_SPI=m -+CONFIG_MFD_WM5102=y -+CONFIG_MEDIA_SUPPORT=m -+CONFIG_MEDIA_CAMERA_SUPPORT=y -+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -+CONFIG_MEDIA_RADIO_SUPPORT=y -+CONFIG_MEDIA_RC_SUPPORT=y -+CONFIG_MEDIA_CONTROLLER=y -+CONFIG_LIRC=m -+CONFIG_RC_DEVICES=y -+CONFIG_RC_ATI_REMOTE=m -+CONFIG_IR_IMON=m -+CONFIG_IR_MCEUSB=m -+CONFIG_IR_REDRAT3=m -+CONFIG_IR_STREAMZAP=m -+CONFIG_IR_IGUANA=m -+CONFIG_IR_TTUSBIR=m -+CONFIG_RC_LOOPBACK=m -+CONFIG_IR_GPIO_CIR=m -+CONFIG_MEDIA_USB_SUPPORT=y -+CONFIG_USB_VIDEO_CLASS=m -+CONFIG_USB_M5602=m -+CONFIG_USB_STV06XX=m -+CONFIG_USB_GL860=m -+CONFIG_USB_GSPCA_BENQ=m -+CONFIG_USB_GSPCA_CONEX=m -+CONFIG_USB_GSPCA_CPIA1=m -+CONFIG_USB_GSPCA_DTCS033=m -+CONFIG_USB_GSPCA_ETOMS=m -+CONFIG_USB_GSPCA_FINEPIX=m -+CONFIG_USB_GSPCA_JEILINJ=m -+CONFIG_USB_GSPCA_JL2005BCD=m -+CONFIG_USB_GSPCA_KINECT=m -+CONFIG_USB_GSPCA_KONICA=m -+CONFIG_USB_GSPCA_MARS=m -+CONFIG_USB_GSPCA_MR97310A=m -+CONFIG_USB_GSPCA_NW80X=m -+CONFIG_USB_GSPCA_OV519=m -+CONFIG_USB_GSPCA_OV534=m -+CONFIG_USB_GSPCA_OV534_9=m -+CONFIG_USB_GSPCA_PAC207=m -+CONFIG_USB_GSPCA_PAC7302=m -+CONFIG_USB_GSPCA_PAC7311=m -+CONFIG_USB_GSPCA_SE401=m -+CONFIG_USB_GSPCA_SN9C2028=m -+CONFIG_USB_GSPCA_SN9C20X=m -+CONFIG_USB_GSPCA_SONIXB=m -+CONFIG_USB_GSPCA_SONIXJ=m -+CONFIG_USB_GSPCA_SPCA500=m -+CONFIG_USB_GSPCA_SPCA501=m -+CONFIG_USB_GSPCA_SPCA505=m -+CONFIG_USB_GSPCA_SPCA506=m -+CONFIG_USB_GSPCA_SPCA508=m -+CONFIG_USB_GSPCA_SPCA561=m -+CONFIG_USB_GSPCA_SPCA1528=m -+CONFIG_USB_GSPCA_SQ905=m -+CONFIG_USB_GSPCA_SQ905C=m -+CONFIG_USB_GSPCA_SQ930X=m -+CONFIG_USB_GSPCA_STK014=m -+CONFIG_USB_GSPCA_STK1135=m -+CONFIG_USB_GSPCA_STV0680=m -+CONFIG_USB_GSPCA_SUNPLUS=m -+CONFIG_USB_GSPCA_T613=m -+CONFIG_USB_GSPCA_TOPRO=m -+CONFIG_USB_GSPCA_TV8532=m -+CONFIG_USB_GSPCA_VC032X=m -+CONFIG_USB_GSPCA_VICAM=m -+CONFIG_USB_GSPCA_XIRLINK_CIT=m -+CONFIG_USB_GSPCA_ZC3XX=m -+CONFIG_USB_PWC=m -+CONFIG_VIDEO_CPIA2=m -+CONFIG_USB_ZR364XX=m -+CONFIG_USB_STKWEBCAM=m -+CONFIG_USB_S2255=m -+CONFIG_VIDEO_USBTV=m -+CONFIG_VIDEO_PVRUSB2=m -+CONFIG_VIDEO_HDPVR=m -+CONFIG_VIDEO_USBVISION=m -+CONFIG_VIDEO_STK1160_COMMON=m -+CONFIG_VIDEO_STK1160_AC97=y -+CONFIG_VIDEO_GO7007=m -+CONFIG_VIDEO_GO7007_USB=m -+CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m -+CONFIG_VIDEO_AU0828=m -+CONFIG_VIDEO_AU0828_RC=y -+CONFIG_VIDEO_CX231XX=m -+CONFIG_VIDEO_CX231XX_ALSA=m -+CONFIG_VIDEO_CX231XX_DVB=m -+CONFIG_VIDEO_TM6000=m -+CONFIG_VIDEO_TM6000_ALSA=m -+CONFIG_VIDEO_TM6000_DVB=m -+CONFIG_DVB_USB=m -+CONFIG_DVB_USB_A800=m -+CONFIG_DVB_USB_DIBUSB_MB=m -+CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y -+CONFIG_DVB_USB_DIBUSB_MC=m -+CONFIG_DVB_USB_DIB0700=m -+CONFIG_DVB_USB_UMT_010=m -+CONFIG_DVB_USB_CXUSB=m -+CONFIG_DVB_USB_M920X=m -+CONFIG_DVB_USB_DIGITV=m -+CONFIG_DVB_USB_VP7045=m -+CONFIG_DVB_USB_VP702X=m -+CONFIG_DVB_USB_GP8PSK=m -+CONFIG_DVB_USB_NOVA_T_USB2=m -+CONFIG_DVB_USB_TTUSB2=m -+CONFIG_DVB_USB_DTT200U=m -+CONFIG_DVB_USB_OPERA1=m -+CONFIG_DVB_USB_AF9005=m -+CONFIG_DVB_USB_AF9005_REMOTE=m -+CONFIG_DVB_USB_PCTV452E=m -+CONFIG_DVB_USB_DW2102=m -+CONFIG_DVB_USB_CINERGY_T2=m -+CONFIG_DVB_USB_DTV5100=m -+CONFIG_DVB_USB_FRIIO=m -+CONFIG_DVB_USB_AZ6027=m -+CONFIG_DVB_USB_TECHNISAT_USB2=m -+CONFIG_DVB_USB_V2=m -+CONFIG_DVB_USB_AF9015=m -+CONFIG_DVB_USB_AF9035=m -+CONFIG_DVB_USB_ANYSEE=m -+CONFIG_DVB_USB_AU6610=m -+CONFIG_DVB_USB_AZ6007=m -+CONFIG_DVB_USB_CE6230=m -+CONFIG_DVB_USB_EC168=m -+CONFIG_DVB_USB_GL861=m -+CONFIG_DVB_USB_LME2510=m -+CONFIG_DVB_USB_MXL111SF=m -+CONFIG_DVB_USB_RTL28XXU=m -+CONFIG_DVB_USB_DVBSKY=m -+CONFIG_SMS_USB_DRV=m -+CONFIG_DVB_B2C2_FLEXCOP_USB=m -+CONFIG_DVB_AS102=m -+CONFIG_VIDEO_EM28XX=m -+CONFIG_VIDEO_EM28XX_V4L2=m -+CONFIG_VIDEO_EM28XX_ALSA=m -+CONFIG_VIDEO_EM28XX_DVB=m -+CONFIG_V4L_PLATFORM_DRIVERS=y -+CONFIG_VIDEO_BCM2835=y -+CONFIG_VIDEO_BCM2835_MMAL=m -+CONFIG_RADIO_SI470X=y -+CONFIG_USB_SI470X=m -+CONFIG_I2C_SI470X=m -+CONFIG_RADIO_SI4713=m -+CONFIG_I2C_SI4713=m -+CONFIG_USB_MR800=m -+CONFIG_USB_DSBR=m -+CONFIG_RADIO_SHARK=m -+CONFIG_RADIO_SHARK2=m -+CONFIG_USB_KEENE=m -+CONFIG_USB_MA901=m -+CONFIG_RADIO_TEA5764=m -+CONFIG_RADIO_SAA7706H=m -+CONFIG_RADIO_TEF6862=m -+CONFIG_RADIO_WL1273=m -+CONFIG_RADIO_WL128X=m -+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set -+CONFIG_VIDEO_UDA1342=m -+CONFIG_VIDEO_SONY_BTF_MPX=m -+CONFIG_VIDEO_TVP5150=m -+CONFIG_VIDEO_TW2804=m -+CONFIG_VIDEO_TW9903=m -+CONFIG_VIDEO_TW9906=m -+CONFIG_VIDEO_OV7640=m -+CONFIG_VIDEO_MT9V011=m -+CONFIG_DRM=m -+CONFIG_DRM_LOAD_EDID_FIRMWARE=y -+CONFIG_DRM_UDL=m -+CONFIG_DRM_VC4=m -+CONFIG_FB=y -+CONFIG_FB_BCM2708=y -+CONFIG_FB_UDL=m -+CONFIG_FB_SSD1307=m -+CONFIG_FB_RPISENSE=m -+# CONFIG_BACKLIGHT_GENERIC is not set -+CONFIG_BACKLIGHT_RPI=m -+CONFIG_BACKLIGHT_GPIO=m -+CONFIG_FRAMEBUFFER_CONSOLE=y -+CONFIG_LOGO=y -+# CONFIG_LOGO_LINUX_MONO is not set -+# CONFIG_LOGO_LINUX_VGA16 is not set -+CONFIG_SOUND=y -+CONFIG_SND=m -+CONFIG_SND_SEQUENCER=m -+CONFIG_SND_SEQ_DUMMY=m -+CONFIG_SND_MIXER_OSS=m -+CONFIG_SND_PCM_OSS=m -+CONFIG_SND_SEQUENCER_OSS=y -+CONFIG_SND_HRTIMER=m -+CONFIG_SND_DUMMY=m -+CONFIG_SND_ALOOP=m -+CONFIG_SND_VIRMIDI=m -+CONFIG_SND_MTPAV=m -+CONFIG_SND_SERIAL_U16550=m -+CONFIG_SND_MPU401=m -+CONFIG_SND_BCM2835=m -+CONFIG_SND_USB_AUDIO=m -+CONFIG_SND_USB_UA101=m -+CONFIG_SND_USB_CAIAQ=m -+CONFIG_SND_USB_CAIAQ_INPUT=y -+CONFIG_SND_USB_6FIRE=m -+CONFIG_SND_SOC=m -+CONFIG_SND_BCM2835_SOC_I2S=m -+CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m -+CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m -+CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m -+CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m -+CONFIG_SND_BCM2708_SOC_RPI_DAC=m -+CONFIG_SND_BCM2708_SOC_RPI_PROTO=m -+CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m -+CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI=m -+CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m -+CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI=m -+CONFIG_SND_BCM2708_SOC_RASPIDAC3=m -+CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m -+CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m -+CONFIG_SND_DIGIDAC1_SOUNDCARD=m -+CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m -+CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m -+CONFIG_SND_PISOUND=m -+CONFIG_SND_SOC_ADAU1701=m -+CONFIG_SND_SOC_AK4554=m -+CONFIG_SND_SOC_WM8804_I2C=m -+CONFIG_SND_SIMPLE_CARD=m -+CONFIG_SOUND_PRIME=m -+CONFIG_HIDRAW=y -+CONFIG_UHID=m -+CONFIG_HID_A4TECH=m -+CONFIG_HID_ACRUX=m -+CONFIG_HID_APPLE=m -+CONFIG_HID_BELKIN=m -+CONFIG_HID_BETOP_FF=m -+CONFIG_HID_CHERRY=m -+CONFIG_HID_CHICONY=m -+CONFIG_HID_CYPRESS=m -+CONFIG_HID_DRAGONRISE=m -+CONFIG_HID_EMS_FF=m -+CONFIG_HID_ELECOM=m -+CONFIG_HID_ELO=m -+CONFIG_HID_EZKEY=m -+CONFIG_HID_GEMBIRD=m -+CONFIG_HID_HOLTEK=m -+CONFIG_HID_KEYTOUCH=m -+CONFIG_HID_KYE=m -+CONFIG_HID_UCLOGIC=m -+CONFIG_HID_WALTOP=m -+CONFIG_HID_GYRATION=m -+CONFIG_HID_TWINHAN=m -+CONFIG_HID_KENSINGTON=m -+CONFIG_HID_LCPOWER=m -+CONFIG_HID_LOGITECH=m -+CONFIG_HID_LOGITECH_DJ=m -+CONFIG_LOGITECH_FF=y -+CONFIG_LOGIRUMBLEPAD2_FF=y -+CONFIG_LOGIG940_FF=y -+CONFIG_HID_MAGICMOUSE=m -+CONFIG_HID_MICROSOFT=m -+CONFIG_HID_MONTEREY=m -+CONFIG_HID_MULTITOUCH=m -+CONFIG_HID_NTRIG=m -+CONFIG_HID_ORTEK=m -+CONFIG_HID_PANTHERLORD=m -+CONFIG_HID_PETALYNX=m -+CONFIG_HID_PICOLCD=m -+CONFIG_HID_ROCCAT=m -+CONFIG_HID_SAMSUNG=m -+CONFIG_HID_SONY=m -+CONFIG_HID_SPEEDLINK=m -+CONFIG_HID_SUNPLUS=m -+CONFIG_HID_GREENASIA=m -+CONFIG_HID_SMARTJOYPLUS=m -+CONFIG_HID_TOPSEED=m -+CONFIG_HID_THINGM=m -+CONFIG_HID_THRUSTMASTER=m -+CONFIG_HID_WACOM=m -+CONFIG_HID_WIIMOTE=m -+CONFIG_HID_XINMO=m -+CONFIG_HID_ZEROPLUS=m -+CONFIG_HID_ZYDACRON=m -+CONFIG_HID_PID=y -+CONFIG_USB_HIDDEV=y -+CONFIG_USB=y -+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -+CONFIG_USB_MON=m -+CONFIG_USB_DWCOTG=y -+CONFIG_USB_PRINTER=m -+CONFIG_USB_STORAGE=y -+CONFIG_USB_STORAGE_REALTEK=m -+CONFIG_USB_STORAGE_DATAFAB=m -+CONFIG_USB_STORAGE_FREECOM=m -+CONFIG_USB_STORAGE_ISD200=m -+CONFIG_USB_STORAGE_USBAT=m -+CONFIG_USB_STORAGE_SDDR09=m -+CONFIG_USB_STORAGE_SDDR55=m -+CONFIG_USB_STORAGE_JUMPSHOT=m -+CONFIG_USB_STORAGE_ALAUDA=m -+CONFIG_USB_STORAGE_ONETOUCH=m -+CONFIG_USB_STORAGE_KARMA=m -+CONFIG_USB_STORAGE_CYPRESS_ATACB=m -+CONFIG_USB_STORAGE_ENE_UB6250=m -+CONFIG_USB_MDC800=m -+CONFIG_USB_MICROTEK=m -+CONFIG_USBIP_CORE=m -+CONFIG_USBIP_VHCI_HCD=m -+CONFIG_USBIP_HOST=m -+CONFIG_USB_SERIAL=m -+CONFIG_USB_SERIAL_GENERIC=y -+CONFIG_USB_SERIAL_AIRCABLE=m -+CONFIG_USB_SERIAL_ARK3116=m -+CONFIG_USB_SERIAL_BELKIN=m -+CONFIG_USB_SERIAL_CH341=m -+CONFIG_USB_SERIAL_WHITEHEAT=m -+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -+CONFIG_USB_SERIAL_CP210X=m -+CONFIG_USB_SERIAL_CYPRESS_M8=m -+CONFIG_USB_SERIAL_EMPEG=m -+CONFIG_USB_SERIAL_FTDI_SIO=m -+CONFIG_USB_SERIAL_VISOR=m -+CONFIG_USB_SERIAL_IPAQ=m -+CONFIG_USB_SERIAL_IR=m -+CONFIG_USB_SERIAL_EDGEPORT=m -+CONFIG_USB_SERIAL_EDGEPORT_TI=m -+CONFIG_USB_SERIAL_F81232=m -+CONFIG_USB_SERIAL_GARMIN=m -+CONFIG_USB_SERIAL_IPW=m -+CONFIG_USB_SERIAL_IUU=m -+CONFIG_USB_SERIAL_KEYSPAN_PDA=m -+CONFIG_USB_SERIAL_KEYSPAN=m -+CONFIG_USB_SERIAL_KLSI=m -+CONFIG_USB_SERIAL_KOBIL_SCT=m -+CONFIG_USB_SERIAL_MCT_U232=m -+CONFIG_USB_SERIAL_METRO=m -+CONFIG_USB_SERIAL_MOS7720=m -+CONFIG_USB_SERIAL_MOS7840=m -+CONFIG_USB_SERIAL_NAVMAN=m -+CONFIG_USB_SERIAL_PL2303=m -+CONFIG_USB_SERIAL_OTI6858=m -+CONFIG_USB_SERIAL_QCAUX=m -+CONFIG_USB_SERIAL_QUALCOMM=m -+CONFIG_USB_SERIAL_SPCP8X5=m -+CONFIG_USB_SERIAL_SAFE=m -+CONFIG_USB_SERIAL_SIERRAWIRELESS=m -+CONFIG_USB_SERIAL_SYMBOL=m -+CONFIG_USB_SERIAL_TI=m -+CONFIG_USB_SERIAL_CYBERJACK=m -+CONFIG_USB_SERIAL_XIRCOM=m -+CONFIG_USB_SERIAL_OPTION=m -+CONFIG_USB_SERIAL_OMNINET=m -+CONFIG_USB_SERIAL_OPTICON=m -+CONFIG_USB_SERIAL_XSENS_MT=m -+CONFIG_USB_SERIAL_WISHBONE=m -+CONFIG_USB_SERIAL_SSU100=m -+CONFIG_USB_SERIAL_QT2=m -+CONFIG_USB_SERIAL_DEBUG=m -+CONFIG_USB_EMI62=m -+CONFIG_USB_EMI26=m -+CONFIG_USB_ADUTUX=m -+CONFIG_USB_SEVSEG=m -+CONFIG_USB_RIO500=m -+CONFIG_USB_LEGOTOWER=m -+CONFIG_USB_LCD=m -+CONFIG_USB_CYPRESS_CY7C63=m -+CONFIG_USB_CYTHERM=m -+CONFIG_USB_IDMOUSE=m -+CONFIG_USB_FTDI_ELAN=m -+CONFIG_USB_APPLEDISPLAY=m -+CONFIG_USB_LD=m -+CONFIG_USB_TRANCEVIBRATOR=m -+CONFIG_USB_IOWARRIOR=m -+CONFIG_USB_TEST=m -+CONFIG_USB_ISIGHTFW=m -+CONFIG_USB_YUREX=m -+CONFIG_USB_ATM=m -+CONFIG_USB_SPEEDTOUCH=m -+CONFIG_USB_CXACRU=m -+CONFIG_USB_UEAGLEATM=m -+CONFIG_USB_XUSBATM=m -+CONFIG_MMC=y -+CONFIG_MMC_BLOCK_MINORS=32 -+CONFIG_MMC_BCM2835=y -+CONFIG_MMC_BCM2835_DMA=y -+CONFIG_MMC_BCM2835_SDHOST=y -+CONFIG_MMC_SDHCI=y -+CONFIG_MMC_SDHCI_PLTFM=y -+CONFIG_MMC_SPI=m -+CONFIG_LEDS_CLASS=y -+CONFIG_LEDS_GPIO=y -+CONFIG_LEDS_TRIGGER_TIMER=y -+CONFIG_LEDS_TRIGGER_ONESHOT=y -+CONFIG_LEDS_TRIGGER_HEARTBEAT=y -+CONFIG_LEDS_TRIGGER_BACKLIGHT=y -+CONFIG_LEDS_TRIGGER_CPU=y -+CONFIG_LEDS_TRIGGER_GPIO=y -+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -+CONFIG_LEDS_TRIGGER_TRANSIENT=m -+CONFIG_LEDS_TRIGGER_CAMERA=m -+CONFIG_LEDS_TRIGGER_INPUT=y -+CONFIG_LEDS_TRIGGER_PANIC=y -+CONFIG_RTC_CLASS=y -+# CONFIG_RTC_HCTOSYS is not set -+CONFIG_RTC_DRV_ABX80X=m -+CONFIG_RTC_DRV_DS1307=m -+CONFIG_RTC_DRV_DS1374=m -+CONFIG_RTC_DRV_DS1672=m -+CONFIG_RTC_DRV_MAX6900=m -+CONFIG_RTC_DRV_RS5C372=m -+CONFIG_RTC_DRV_ISL1208=m -+CONFIG_RTC_DRV_ISL12022=m -+CONFIG_RTC_DRV_X1205=m -+CONFIG_RTC_DRV_PCF8523=m -+CONFIG_RTC_DRV_PCF8563=m -+CONFIG_RTC_DRV_PCF8583=m -+CONFIG_RTC_DRV_M41T80=m -+CONFIG_RTC_DRV_BQ32K=m -+CONFIG_RTC_DRV_S35390A=m -+CONFIG_RTC_DRV_FM3130=m -+CONFIG_RTC_DRV_RX8581=m -+CONFIG_RTC_DRV_RX8025=m -+CONFIG_RTC_DRV_EM3027=m -+CONFIG_RTC_DRV_M41T93=m -+CONFIG_RTC_DRV_M41T94=m -+CONFIG_RTC_DRV_DS1302=m -+CONFIG_RTC_DRV_DS1305=m -+CONFIG_RTC_DRV_DS1390=m -+CONFIG_RTC_DRV_R9701=m -+CONFIG_RTC_DRV_RX4581=m -+CONFIG_RTC_DRV_RS5C348=m -+CONFIG_RTC_DRV_MAX6902=m -+CONFIG_RTC_DRV_PCF2123=m -+CONFIG_RTC_DRV_DS3232=m -+CONFIG_RTC_DRV_PCF2127=m -+CONFIG_RTC_DRV_RV3029C2=m -+CONFIG_DMADEVICES=y -+CONFIG_DMA_BCM2835=y -+CONFIG_DMA_BCM2708=y -+CONFIG_UIO=m -+CONFIG_UIO_PDRV_GENIRQ=m -+CONFIG_STAGING=y -+CONFIG_PRISM2_USB=m -+CONFIG_R8712U=m -+CONFIG_R8188EU=m -+CONFIG_VT6656=m -+CONFIG_SPEAKUP=m -+CONFIG_SPEAKUP_SYNTH_SOFT=m -+CONFIG_STAGING_MEDIA=y -+CONFIG_LIRC_STAGING=y -+CONFIG_LIRC_IMON=m -+CONFIG_LIRC_RPI=m -+CONFIG_LIRC_SASEM=m -+CONFIG_LIRC_SERIAL=m -+CONFIG_FB_TFT=m -+CONFIG_FB_TFT_AGM1264K_FL=m -+CONFIG_FB_TFT_BD663474=m -+CONFIG_FB_TFT_HX8340BN=m -+CONFIG_FB_TFT_HX8347D=m -+CONFIG_FB_TFT_HX8353D=m -+CONFIG_FB_TFT_HX8357D=m -+CONFIG_FB_TFT_ILI9163=m -+CONFIG_FB_TFT_ILI9320=m -+CONFIG_FB_TFT_ILI9325=m -+CONFIG_FB_TFT_ILI9340=m -+CONFIG_FB_TFT_ILI9341=m -+CONFIG_FB_TFT_ILI9481=m -+CONFIG_FB_TFT_ILI9486=m -+CONFIG_FB_TFT_PCD8544=m -+CONFIG_FB_TFT_RA8875=m -+CONFIG_FB_TFT_S6D02A1=m -+CONFIG_FB_TFT_S6D1121=m -+CONFIG_FB_TFT_SSD1289=m -+CONFIG_FB_TFT_SSD1306=m -+CONFIG_FB_TFT_SSD1331=m -+CONFIG_FB_TFT_SSD1351=m -+CONFIG_FB_TFT_ST7735R=m -+CONFIG_FB_TFT_TINYLCD=m -+CONFIG_FB_TFT_TLS8204=m -+CONFIG_FB_TFT_UC1701=m -+CONFIG_FB_TFT_UPD161704=m -+CONFIG_FB_TFT_WATTEROTT=m -+CONFIG_FB_FLEX=m -+CONFIG_FB_TFT_FBTFT_DEVICE=m -+CONFIG_MAILBOX=y -+CONFIG_BCM2835_MBOX=y -+# CONFIG_IOMMU_SUPPORT is not set -+CONFIG_RASPBERRYPI_POWER=y -+CONFIG_EXTCON=m -+CONFIG_EXTCON_ARIZONA=m -+CONFIG_IIO=m -+CONFIG_IIO_BUFFER=y -+CONFIG_IIO_BUFFER_CB=m -+CONFIG_IIO_KFIFO_BUF=m -+CONFIG_MCP320X=m -+CONFIG_MCP3422=m -+CONFIG_DHT11=m -+CONFIG_HTU21=m -+CONFIG_PWM_BCM2835=m -+CONFIG_PWM_PCA9685=m -+CONFIG_RASPBERRYPI_FIRMWARE=y -+CONFIG_EXT4_FS=y -+CONFIG_EXT4_FS_POSIX_ACL=y -+CONFIG_EXT4_FS_SECURITY=y -+CONFIG_REISERFS_FS=m -+CONFIG_REISERFS_FS_XATTR=y -+CONFIG_REISERFS_FS_POSIX_ACL=y -+CONFIG_REISERFS_FS_SECURITY=y -+CONFIG_JFS_FS=m -+CONFIG_JFS_POSIX_ACL=y -+CONFIG_JFS_SECURITY=y -+CONFIG_JFS_STATISTICS=y -+CONFIG_XFS_FS=m -+CONFIG_XFS_QUOTA=y -+CONFIG_XFS_POSIX_ACL=y -+CONFIG_XFS_RT=y -+CONFIG_GFS2_FS=m -+CONFIG_OCFS2_FS=m -+CONFIG_BTRFS_FS=m -+CONFIG_BTRFS_FS_POSIX_ACL=y -+CONFIG_NILFS2_FS=m -+CONFIG_F2FS_FS=y -+CONFIG_FANOTIFY=y -+CONFIG_QFMT_V1=m -+CONFIG_QFMT_V2=m -+CONFIG_AUTOFS4_FS=y -+CONFIG_FUSE_FS=m -+CONFIG_CUSE=m -+CONFIG_OVERLAY_FS=m -+CONFIG_FSCACHE=y -+CONFIG_FSCACHE_STATS=y -+CONFIG_FSCACHE_HISTOGRAM=y -+CONFIG_CACHEFILES=y -+CONFIG_ISO9660_FS=m -+CONFIG_JOLIET=y -+CONFIG_ZISOFS=y -+CONFIG_UDF_FS=m -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_IOCHARSET="ascii" -+CONFIG_NTFS_FS=m -+CONFIG_NTFS_RW=y -+CONFIG_TMPFS=y -+CONFIG_TMPFS_POSIX_ACL=y -+CONFIG_ECRYPT_FS=m -+CONFIG_HFS_FS=m -+CONFIG_HFSPLUS_FS=m -+CONFIG_JFFS2_FS=m -+CONFIG_JFFS2_SUMMARY=y -+CONFIG_UBIFS_FS=m -+CONFIG_SQUASHFS=m -+CONFIG_SQUASHFS_XATTR=y -+CONFIG_SQUASHFS_LZO=y -+CONFIG_SQUASHFS_XZ=y -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3_ACL=y -+CONFIG_NFS_V4=y -+CONFIG_NFS_SWAP=y -+CONFIG_ROOT_NFS=y -+CONFIG_NFS_FSCACHE=y -+CONFIG_NFSD=m -+CONFIG_NFSD_V3_ACL=y -+CONFIG_NFSD_V4=y -+CONFIG_CIFS=m -+CONFIG_CIFS_WEAK_PW_HASH=y -+CONFIG_CIFS_UPCALL=y -+CONFIG_CIFS_XATTR=y -+CONFIG_CIFS_POSIX=y -+CONFIG_CIFS_ACL=y -+CONFIG_CIFS_DFS_UPCALL=y -+CONFIG_CIFS_SMB2=y -+CONFIG_CIFS_FSCACHE=y -+CONFIG_9P_FS=m -+CONFIG_9P_FS_POSIX_ACL=y -+CONFIG_NLS_DEFAULT="utf8" -+CONFIG_NLS_CODEPAGE_437=y -+CONFIG_NLS_CODEPAGE_737=m -+CONFIG_NLS_CODEPAGE_775=m -+CONFIG_NLS_CODEPAGE_850=m -+CONFIG_NLS_CODEPAGE_852=m -+CONFIG_NLS_CODEPAGE_855=m -+CONFIG_NLS_CODEPAGE_857=m -+CONFIG_NLS_CODEPAGE_860=m -+CONFIG_NLS_CODEPAGE_861=m -+CONFIG_NLS_CODEPAGE_862=m -+CONFIG_NLS_CODEPAGE_863=m -+CONFIG_NLS_CODEPAGE_864=m -+CONFIG_NLS_CODEPAGE_865=m -+CONFIG_NLS_CODEPAGE_866=m -+CONFIG_NLS_CODEPAGE_869=m -+CONFIG_NLS_CODEPAGE_936=m -+CONFIG_NLS_CODEPAGE_950=m -+CONFIG_NLS_CODEPAGE_932=m -+CONFIG_NLS_CODEPAGE_949=m -+CONFIG_NLS_CODEPAGE_874=m -+CONFIG_NLS_ISO8859_8=m -+CONFIG_NLS_CODEPAGE_1250=m -+CONFIG_NLS_CODEPAGE_1251=m -+CONFIG_NLS_ASCII=y -+CONFIG_NLS_ISO8859_1=m -+CONFIG_NLS_ISO8859_2=m -+CONFIG_NLS_ISO8859_3=m -+CONFIG_NLS_ISO8859_4=m -+CONFIG_NLS_ISO8859_5=m -+CONFIG_NLS_ISO8859_6=m -+CONFIG_NLS_ISO8859_7=m -+CONFIG_NLS_ISO8859_9=m -+CONFIG_NLS_ISO8859_13=m -+CONFIG_NLS_ISO8859_14=m -+CONFIG_NLS_ISO8859_15=m -+CONFIG_NLS_KOI8_R=m -+CONFIG_NLS_KOI8_U=m -+CONFIG_DLM=m -+CONFIG_PRINTK_TIME=y -+CONFIG_BOOT_PRINTK_DELAY=y -+CONFIG_DEBUG_MEMORY_INIT=y -+CONFIG_DETECT_HUNG_TASK=y -+CONFIG_TIMER_STATS=y -+CONFIG_LATENCYTOP=y -+CONFIG_IRQSOFF_TRACER=y -+CONFIG_SCHED_TRACER=y -+CONFIG_STACK_TRACER=y -+CONFIG_BLK_DEV_IO_TRACE=y -+# CONFIG_KPROBE_EVENT is not set -+CONFIG_FUNCTION_PROFILER=y -+CONFIG_KGDB=y -+CONFIG_KGDB_KDB=y -+CONFIG_KDB_KEYBOARD=y -+CONFIG_CRYPTO_USER=m -+CONFIG_CRYPTO_CBC=y -+CONFIG_CRYPTO_CTS=m -+CONFIG_CRYPTO_XTS=m -+CONFIG_CRYPTO_XCBC=m -+CONFIG_CRYPTO_TGR192=m -+CONFIG_CRYPTO_WP512=m -+CONFIG_CRYPTO_CAST5=m -+CONFIG_CRYPTO_DES=y -+CONFIG_CRYPTO_USER_API_SKCIPHER=m -+# CONFIG_CRYPTO_HW is not set -+CONFIG_ARM_CRYPTO=y -+CONFIG_CRYPTO_SHA1_ARM_NEON=m -+CONFIG_CRYPTO_AES_ARM_BS=m -+CONFIG_CRC_ITU_T=y -+CONFIG_LIBCRC32C=y ---- /dev/null -+++ b/arch/arm/configs/bcmrpi_defconfig -@@ -0,0 +1,1308 @@ -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_SYSVIPC=y -+CONFIG_POSIX_MQUEUE=y -+CONFIG_NO_HZ=y -+CONFIG_HIGH_RES_TIMERS=y -+CONFIG_BSD_PROCESS_ACCT=y -+CONFIG_BSD_PROCESS_ACCT_V3=y -+CONFIG_TASKSTATS=y -+CONFIG_TASK_DELAY_ACCT=y -+CONFIG_TASK_XACCT=y -+CONFIG_TASK_IO_ACCOUNTING=y -+CONFIG_IKCONFIG=m -+CONFIG_IKCONFIG_PROC=y -+CONFIG_NMI_LOG_BUF_SHIFT=12 -+CONFIG_MEMCG=y -+CONFIG_BLK_CGROUP=y -+CONFIG_CGROUP_FREEZER=y -+CONFIG_CPUSETS=y -+CONFIG_CGROUP_DEVICE=y -+CONFIG_CGROUP_CPUACCT=y -+CONFIG_NAMESPACES=y -+CONFIG_USER_NS=y -+CONFIG_SCHED_AUTOGROUP=y -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_EMBEDDED=y -+# CONFIG_COMPAT_BRK is not set -+CONFIG_PROFILING=y -+CONFIG_OPROFILE=m -+CONFIG_KPROBES=y -+CONFIG_JUMP_LABEL=y -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODVERSIONS=y -+CONFIG_MODULE_SRCVERSION_ALL=y -+CONFIG_BLK_DEV_THROTTLING=y -+CONFIG_PARTITION_ADVANCED=y -+CONFIG_MAC_PARTITION=y -+CONFIG_CFQ_GROUP_IOSCHED=y -+CONFIG_ARCH_MULTI_V6=y -+# CONFIG_ARCH_MULTI_V7 is not set -+CONFIG_ARCH_BCM=y -+CONFIG_ARCH_BCM2835=y -+# CONFIG_CACHE_L2X0 is not set -+CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_AEABI=y -+# CONFIG_CPU_SW_DOMAIN_PAN is not set -+CONFIG_CLEANCACHE=y -+CONFIG_FRONTSWAP=y -+CONFIG_CMA=y -+CONFIG_ZSMALLOC=m -+CONFIG_PGTABLE_MAPPING=y -+CONFIG_UACCESS_WITH_MEMCPY=y -+CONFIG_SECCOMP=y -+# CONFIG_ATAGS is not set -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" -+CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_STAT=y -+CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y -+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -+CONFIG_CPU_FREQ_GOV_USERSPACE=y -+CONFIG_CPU_FREQ_GOV_ONDEMAND=y -+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -+CONFIG_VFP=y -+CONFIG_BINFMT_MISC=m -+# CONFIG_SUSPEND is not set -+CONFIG_PM=y -+CONFIG_NET=y -+CONFIG_PACKET=y -+CONFIG_UNIX=y -+CONFIG_XFRM_USER=y -+CONFIG_NET_KEY=m -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_ADVANCED_ROUTER=y -+CONFIG_IP_MULTIPLE_TABLES=y -+CONFIG_IP_ROUTE_MULTIPATH=y -+CONFIG_IP_ROUTE_VERBOSE=y -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+CONFIG_IP_PNP_RARP=y -+CONFIG_NET_IPIP=m -+CONFIG_NET_IPGRE_DEMUX=m -+CONFIG_NET_IPGRE=m -+CONFIG_IP_MROUTE=y -+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y -+CONFIG_IP_PIMSM_V1=y -+CONFIG_IP_PIMSM_V2=y -+CONFIG_SYN_COOKIES=y -+CONFIG_INET_AH=m -+CONFIG_INET_ESP=m -+CONFIG_INET_IPCOMP=m -+CONFIG_INET_XFRM_MODE_TRANSPORT=m -+CONFIG_INET_XFRM_MODE_TUNNEL=m -+CONFIG_INET_XFRM_MODE_BEET=m -+CONFIG_INET_DIAG=m -+CONFIG_IPV6=m -+CONFIG_IPV6_ROUTER_PREF=y -+CONFIG_INET6_AH=m -+CONFIG_INET6_ESP=m -+CONFIG_INET6_IPCOMP=m -+CONFIG_IPV6_TUNNEL=m -+CONFIG_IPV6_MULTIPLE_TABLES=y -+CONFIG_IPV6_SUBTREES=y -+CONFIG_IPV6_MROUTE=y -+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y -+CONFIG_IPV6_PIMSM_V2=y -+CONFIG_NETFILTER=y -+CONFIG_NF_CONNTRACK=m -+CONFIG_NF_CONNTRACK_ZONES=y -+CONFIG_NF_CONNTRACK_EVENTS=y -+CONFIG_NF_CONNTRACK_TIMESTAMP=y -+CONFIG_NF_CT_PROTO_DCCP=m -+CONFIG_NF_CT_PROTO_UDPLITE=m -+CONFIG_NF_CONNTRACK_AMANDA=m -+CONFIG_NF_CONNTRACK_FTP=m -+CONFIG_NF_CONNTRACK_H323=m -+CONFIG_NF_CONNTRACK_IRC=m -+CONFIG_NF_CONNTRACK_NETBIOS_NS=m -+CONFIG_NF_CONNTRACK_SNMP=m -+CONFIG_NF_CONNTRACK_PPTP=m -+CONFIG_NF_CONNTRACK_SANE=m -+CONFIG_NF_CONNTRACK_SIP=m -+CONFIG_NF_CONNTRACK_TFTP=m -+CONFIG_NF_CT_NETLINK=m -+CONFIG_NETFILTER_XT_SET=m -+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m -+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -+CONFIG_NETFILTER_XT_TARGET_DSCP=m -+CONFIG_NETFILTER_XT_TARGET_HMARK=m -+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m -+CONFIG_NETFILTER_XT_TARGET_LED=m -+CONFIG_NETFILTER_XT_TARGET_LOG=m -+CONFIG_NETFILTER_XT_TARGET_MARK=m -+CONFIG_NETFILTER_XT_TARGET_NFLOG=m -+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m -+CONFIG_NETFILTER_XT_TARGET_TEE=m -+CONFIG_NETFILTER_XT_TARGET_TPROXY=m -+CONFIG_NETFILTER_XT_TARGET_TRACE=m -+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m -+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m -+CONFIG_NETFILTER_XT_MATCH_BPF=m -+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -+CONFIG_NETFILTER_XT_MATCH_COMMENT=m -+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m -+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -+CONFIG_NETFILTER_XT_MATCH_CPU=m -+CONFIG_NETFILTER_XT_MATCH_DCCP=m -+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m -+CONFIG_NETFILTER_XT_MATCH_DSCP=m -+CONFIG_NETFILTER_XT_MATCH_ESP=m -+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -+CONFIG_NETFILTER_XT_MATCH_HELPER=m -+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -+CONFIG_NETFILTER_XT_MATCH_IPVS=m -+CONFIG_NETFILTER_XT_MATCH_LENGTH=m -+CONFIG_NETFILTER_XT_MATCH_LIMIT=m -+CONFIG_NETFILTER_XT_MATCH_MAC=m -+CONFIG_NETFILTER_XT_MATCH_MARK=m -+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -+CONFIG_NETFILTER_XT_MATCH_NFACCT=m -+CONFIG_NETFILTER_XT_MATCH_OSF=m -+CONFIG_NETFILTER_XT_MATCH_OWNER=m -+CONFIG_NETFILTER_XT_MATCH_POLICY=m -+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -+CONFIG_NETFILTER_XT_MATCH_QUOTA=m -+CONFIG_NETFILTER_XT_MATCH_RATEEST=m -+CONFIG_NETFILTER_XT_MATCH_REALM=m -+CONFIG_NETFILTER_XT_MATCH_RECENT=m -+CONFIG_NETFILTER_XT_MATCH_SOCKET=m -+CONFIG_NETFILTER_XT_MATCH_STATE=m -+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -+CONFIG_NETFILTER_XT_MATCH_STRING=m -+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -+CONFIG_NETFILTER_XT_MATCH_TIME=m -+CONFIG_NETFILTER_XT_MATCH_U32=m -+CONFIG_IP_SET=m -+CONFIG_IP_SET_BITMAP_IP=m -+CONFIG_IP_SET_BITMAP_IPMAC=m -+CONFIG_IP_SET_BITMAP_PORT=m -+CONFIG_IP_SET_HASH_IP=m -+CONFIG_IP_SET_HASH_IPPORT=m -+CONFIG_IP_SET_HASH_IPPORTIP=m -+CONFIG_IP_SET_HASH_IPPORTNET=m -+CONFIG_IP_SET_HASH_NET=m -+CONFIG_IP_SET_HASH_NETPORT=m -+CONFIG_IP_SET_HASH_NETIFACE=m -+CONFIG_IP_SET_LIST_SET=m -+CONFIG_IP_VS=m -+CONFIG_IP_VS_PROTO_TCP=y -+CONFIG_IP_VS_PROTO_UDP=y -+CONFIG_IP_VS_PROTO_ESP=y -+CONFIG_IP_VS_PROTO_AH=y -+CONFIG_IP_VS_PROTO_SCTP=y -+CONFIG_IP_VS_RR=m -+CONFIG_IP_VS_WRR=m -+CONFIG_IP_VS_LC=m -+CONFIG_IP_VS_WLC=m -+CONFIG_IP_VS_LBLC=m -+CONFIG_IP_VS_LBLCR=m -+CONFIG_IP_VS_DH=m -+CONFIG_IP_VS_SH=m -+CONFIG_IP_VS_SED=m -+CONFIG_IP_VS_NQ=m -+CONFIG_IP_VS_FTP=m -+CONFIG_IP_VS_PE_SIP=m -+CONFIG_NF_CONNTRACK_IPV4=m -+CONFIG_IP_NF_IPTABLES=m -+CONFIG_IP_NF_MATCH_AH=m -+CONFIG_IP_NF_MATCH_ECN=m -+CONFIG_IP_NF_MATCH_RPFILTER=m -+CONFIG_IP_NF_MATCH_TTL=m -+CONFIG_IP_NF_FILTER=m -+CONFIG_IP_NF_TARGET_REJECT=m -+CONFIG_IP_NF_NAT=m -+CONFIG_IP_NF_TARGET_MASQUERADE=m -+CONFIG_IP_NF_TARGET_NETMAP=m -+CONFIG_IP_NF_TARGET_REDIRECT=m -+CONFIG_IP_NF_MANGLE=m -+CONFIG_IP_NF_TARGET_CLUSTERIP=m -+CONFIG_IP_NF_TARGET_ECN=m -+CONFIG_IP_NF_TARGET_TTL=m -+CONFIG_IP_NF_RAW=m -+CONFIG_IP_NF_ARPTABLES=m -+CONFIG_IP_NF_ARPFILTER=m -+CONFIG_IP_NF_ARP_MANGLE=m -+CONFIG_NF_CONNTRACK_IPV6=m -+CONFIG_IP6_NF_IPTABLES=m -+CONFIG_IP6_NF_MATCH_AH=m -+CONFIG_IP6_NF_MATCH_EUI64=m -+CONFIG_IP6_NF_MATCH_FRAG=m -+CONFIG_IP6_NF_MATCH_OPTS=m -+CONFIG_IP6_NF_MATCH_HL=m -+CONFIG_IP6_NF_MATCH_IPV6HEADER=m -+CONFIG_IP6_NF_MATCH_MH=m -+CONFIG_IP6_NF_MATCH_RPFILTER=m -+CONFIG_IP6_NF_MATCH_RT=m -+CONFIG_IP6_NF_TARGET_HL=m -+CONFIG_IP6_NF_FILTER=m -+CONFIG_IP6_NF_TARGET_REJECT=m -+CONFIG_IP6_NF_MANGLE=m -+CONFIG_IP6_NF_RAW=m -+CONFIG_IP6_NF_NAT=m -+CONFIG_IP6_NF_TARGET_MASQUERADE=m -+CONFIG_IP6_NF_TARGET_NPT=m -+CONFIG_BRIDGE_NF_EBTABLES=m -+CONFIG_BRIDGE_EBT_BROUTE=m -+CONFIG_BRIDGE_EBT_T_FILTER=m -+CONFIG_BRIDGE_EBT_T_NAT=m -+CONFIG_BRIDGE_EBT_802_3=m -+CONFIG_BRIDGE_EBT_AMONG=m -+CONFIG_BRIDGE_EBT_ARP=m -+CONFIG_BRIDGE_EBT_IP=m -+CONFIG_BRIDGE_EBT_IP6=m -+CONFIG_BRIDGE_EBT_LIMIT=m -+CONFIG_BRIDGE_EBT_MARK=m -+CONFIG_BRIDGE_EBT_PKTTYPE=m -+CONFIG_BRIDGE_EBT_STP=m -+CONFIG_BRIDGE_EBT_VLAN=m -+CONFIG_BRIDGE_EBT_ARPREPLY=m -+CONFIG_BRIDGE_EBT_DNAT=m -+CONFIG_BRIDGE_EBT_MARK_T=m -+CONFIG_BRIDGE_EBT_REDIRECT=m -+CONFIG_BRIDGE_EBT_SNAT=m -+CONFIG_BRIDGE_EBT_LOG=m -+CONFIG_BRIDGE_EBT_NFLOG=m -+CONFIG_SCTP_COOKIE_HMAC_SHA1=y -+CONFIG_ATM=m -+CONFIG_L2TP=m -+CONFIG_L2TP_V3=y -+CONFIG_L2TP_IP=m -+CONFIG_L2TP_ETH=m -+CONFIG_BRIDGE=m -+CONFIG_VLAN_8021Q=m -+CONFIG_VLAN_8021Q_GVRP=y -+CONFIG_ATALK=m -+CONFIG_6LOWPAN=m -+CONFIG_IEEE802154=m -+CONFIG_IEEE802154_6LOWPAN=m -+CONFIG_MAC802154=m -+CONFIG_NET_SCHED=y -+CONFIG_NET_SCH_CBQ=m -+CONFIG_NET_SCH_HTB=m -+CONFIG_NET_SCH_HFSC=m -+CONFIG_NET_SCH_PRIO=m -+CONFIG_NET_SCH_MULTIQ=m -+CONFIG_NET_SCH_RED=m -+CONFIG_NET_SCH_SFB=m -+CONFIG_NET_SCH_SFQ=m -+CONFIG_NET_SCH_TEQL=m -+CONFIG_NET_SCH_TBF=m -+CONFIG_NET_SCH_GRED=m -+CONFIG_NET_SCH_DSMARK=m -+CONFIG_NET_SCH_NETEM=m -+CONFIG_NET_SCH_DRR=m -+CONFIG_NET_SCH_MQPRIO=m -+CONFIG_NET_SCH_CHOKE=m -+CONFIG_NET_SCH_QFQ=m -+CONFIG_NET_SCH_CODEL=m -+CONFIG_NET_SCH_FQ_CODEL=m -+CONFIG_NET_SCH_INGRESS=m -+CONFIG_NET_SCH_PLUG=m -+CONFIG_NET_CLS_BASIC=m -+CONFIG_NET_CLS_TCINDEX=m -+CONFIG_NET_CLS_ROUTE4=m -+CONFIG_NET_CLS_FW=m -+CONFIG_NET_CLS_U32=m -+CONFIG_CLS_U32_MARK=y -+CONFIG_NET_CLS_RSVP=m -+CONFIG_NET_CLS_RSVP6=m -+CONFIG_NET_CLS_FLOW=m -+CONFIG_NET_CLS_CGROUP=m -+CONFIG_NET_EMATCH=y -+CONFIG_NET_EMATCH_CMP=m -+CONFIG_NET_EMATCH_NBYTE=m -+CONFIG_NET_EMATCH_U32=m -+CONFIG_NET_EMATCH_META=m -+CONFIG_NET_EMATCH_TEXT=m -+CONFIG_NET_EMATCH_IPSET=m -+CONFIG_NET_CLS_ACT=y -+CONFIG_NET_ACT_POLICE=m -+CONFIG_NET_ACT_GACT=m -+CONFIG_GACT_PROB=y -+CONFIG_NET_ACT_MIRRED=m -+CONFIG_NET_ACT_IPT=m -+CONFIG_NET_ACT_NAT=m -+CONFIG_NET_ACT_PEDIT=m -+CONFIG_NET_ACT_SIMP=m -+CONFIG_NET_ACT_SKBEDIT=m -+CONFIG_NET_ACT_CSUM=m -+CONFIG_BATMAN_ADV=m -+CONFIG_OPENVSWITCH=m -+CONFIG_NET_PKTGEN=m -+CONFIG_HAMRADIO=y -+CONFIG_AX25=m -+CONFIG_NETROM=m -+CONFIG_ROSE=m -+CONFIG_MKISS=m -+CONFIG_6PACK=m -+CONFIG_BPQETHER=m -+CONFIG_BAYCOM_SER_FDX=m -+CONFIG_BAYCOM_SER_HDX=m -+CONFIG_YAM=m -+CONFIG_CAN=m -+CONFIG_CAN_VCAN=m -+CONFIG_CAN_MCP251X=m -+CONFIG_IRDA=m -+CONFIG_IRLAN=m -+CONFIG_IRNET=m -+CONFIG_IRCOMM=m -+CONFIG_IRDA_ULTRA=y -+CONFIG_IRDA_CACHE_LAST_LSAP=y -+CONFIG_IRDA_FAST_RR=y -+CONFIG_IRTTY_SIR=m -+CONFIG_KINGSUN_DONGLE=m -+CONFIG_KSDAZZLE_DONGLE=m -+CONFIG_KS959_DONGLE=m -+CONFIG_USB_IRDA=m -+CONFIG_SIGMATEL_FIR=m -+CONFIG_MCS_FIR=m -+CONFIG_BT=m -+CONFIG_BT_RFCOMM=m -+CONFIG_BT_RFCOMM_TTY=y -+CONFIG_BT_BNEP=m -+CONFIG_BT_BNEP_MC_FILTER=y -+CONFIG_BT_BNEP_PROTO_FILTER=y -+CONFIG_BT_HIDP=m -+CONFIG_BT_6LOWPAN=m -+CONFIG_BT_HCIBTUSB=m -+CONFIG_BT_HCIUART=m -+CONFIG_BT_HCIUART_3WIRE=y -+CONFIG_BT_HCIUART_BCM=y -+CONFIG_BT_HCIBCM203X=m -+CONFIG_BT_HCIBPA10X=m -+CONFIG_BT_HCIBFUSB=m -+CONFIG_BT_HCIVHCI=m -+CONFIG_BT_MRVL=m -+CONFIG_BT_MRVL_SDIO=m -+CONFIG_BT_ATH3K=m -+CONFIG_BT_WILINK=m -+CONFIG_CFG80211=m -+CONFIG_MAC80211=m -+CONFIG_MAC80211_MESH=y -+CONFIG_WIMAX=m -+CONFIG_RFKILL=m -+CONFIG_RFKILL_INPUT=y -+CONFIG_NET_9P=m -+CONFIG_NFC=m -+CONFIG_DEVTMPFS=y -+CONFIG_DEVTMPFS_MOUNT=y -+CONFIG_DMA_CMA=y -+CONFIG_CMA_SIZE_MBYTES=5 -+CONFIG_MTD=m -+CONFIG_MTD_BLOCK=m -+CONFIG_MTD_NAND=m -+CONFIG_MTD_UBI=m -+CONFIG_OF_CONFIGFS=y -+CONFIG_ZRAM=m -+CONFIG_BLK_DEV_LOOP=y -+CONFIG_BLK_DEV_CRYPTOLOOP=m -+CONFIG_BLK_DEV_DRBD=m -+CONFIG_BLK_DEV_NBD=m -+CONFIG_BLK_DEV_RAM=y -+CONFIG_CDROM_PKTCDVD=m -+CONFIG_ATA_OVER_ETH=m -+CONFIG_EEPROM_AT24=m -+CONFIG_TI_ST=m -+CONFIG_SCSI=y -+# CONFIG_SCSI_PROC_FS is not set -+CONFIG_BLK_DEV_SD=y -+CONFIG_CHR_DEV_ST=m -+CONFIG_CHR_DEV_OSST=m -+CONFIG_BLK_DEV_SR=m -+CONFIG_CHR_DEV_SG=m -+CONFIG_SCSI_ISCSI_ATTRS=y -+CONFIG_ISCSI_TCP=m -+CONFIG_ISCSI_BOOT_SYSFS=m -+CONFIG_MD=y -+CONFIG_MD_LINEAR=m -+CONFIG_MD_RAID0=m -+CONFIG_BLK_DEV_DM=m -+CONFIG_DM_CRYPT=m -+CONFIG_DM_SNAPSHOT=m -+CONFIG_DM_THIN_PROVISIONING=m -+CONFIG_DM_MIRROR=m -+CONFIG_DM_LOG_USERSPACE=m -+CONFIG_DM_RAID=m -+CONFIG_DM_ZERO=m -+CONFIG_DM_DELAY=m -+CONFIG_NETDEVICES=y -+CONFIG_BONDING=m -+CONFIG_DUMMY=m -+CONFIG_IFB=m -+CONFIG_MACVLAN=m -+CONFIG_VXLAN=m -+CONFIG_NETCONSOLE=m -+CONFIG_TUN=m -+CONFIG_VETH=m -+CONFIG_ENC28J60=m -+CONFIG_QCA7000=m -+CONFIG_MDIO_BITBANG=m -+CONFIG_PPP=m -+CONFIG_PPP_BSDCOMP=m -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_FILTER=y -+CONFIG_PPP_MPPE=m -+CONFIG_PPP_MULTILINK=y -+CONFIG_PPPOATM=m -+CONFIG_PPPOE=m -+CONFIG_PPPOL2TP=m -+CONFIG_PPP_ASYNC=m -+CONFIG_PPP_SYNC_TTY=m -+CONFIG_SLIP=m -+CONFIG_SLIP_COMPRESSED=y -+CONFIG_SLIP_SMART=y -+CONFIG_USB_CATC=m -+CONFIG_USB_KAWETH=m -+CONFIG_USB_PEGASUS=m -+CONFIG_USB_RTL8150=m -+CONFIG_USB_RTL8152=m -+CONFIG_USB_USBNET=y -+CONFIG_USB_NET_AX8817X=m -+CONFIG_USB_NET_AX88179_178A=m -+CONFIG_USB_NET_CDCETHER=m -+CONFIG_USB_NET_CDC_EEM=m -+CONFIG_USB_NET_CDC_NCM=m -+CONFIG_USB_NET_HUAWEI_CDC_NCM=m -+CONFIG_USB_NET_CDC_MBIM=m -+CONFIG_USB_NET_DM9601=m -+CONFIG_USB_NET_SR9700=m -+CONFIG_USB_NET_SR9800=m -+CONFIG_USB_NET_SMSC75XX=m -+CONFIG_USB_NET_SMSC95XX=y -+CONFIG_USB_NET_GL620A=m -+CONFIG_USB_NET_NET1080=m -+CONFIG_USB_NET_PLUSB=m -+CONFIG_USB_NET_MCS7830=m -+CONFIG_USB_NET_CDC_SUBSET=m -+CONFIG_USB_ALI_M5632=y -+CONFIG_USB_AN2720=y -+CONFIG_USB_EPSON2888=y -+CONFIG_USB_KC2190=y -+CONFIG_USB_NET_ZAURUS=m -+CONFIG_USB_NET_CX82310_ETH=m -+CONFIG_USB_NET_KALMIA=m -+CONFIG_USB_NET_QMI_WWAN=m -+CONFIG_USB_HSO=m -+CONFIG_USB_NET_INT51X1=m -+CONFIG_USB_IPHETH=m -+CONFIG_USB_SIERRA_NET=m -+CONFIG_USB_VL600=m -+CONFIG_ATH9K=m -+CONFIG_ATH9K_HTC=m -+CONFIG_CARL9170=m -+CONFIG_ATH6KL=m -+CONFIG_ATH6KL_USB=m -+CONFIG_AR5523=m -+CONFIG_AT76C50X_USB=m -+CONFIG_B43=m -+# CONFIG_B43_PHY_N is not set -+CONFIG_B43LEGACY=m -+CONFIG_BRCMFMAC=m -+CONFIG_BRCMFMAC_USB=y -+CONFIG_HOSTAP=m -+CONFIG_P54_COMMON=m -+CONFIG_P54_USB=m -+CONFIG_LIBERTAS=m -+CONFIG_LIBERTAS_USB=m -+CONFIG_LIBERTAS_SDIO=m -+CONFIG_LIBERTAS_THINFIRM=m -+CONFIG_LIBERTAS_THINFIRM_USB=m -+CONFIG_MWIFIEX=m -+CONFIG_MWIFIEX_SDIO=m -+CONFIG_MT7601U=m -+CONFIG_RT2X00=m -+CONFIG_RT2500USB=m -+CONFIG_RT73USB=m -+CONFIG_RT2800USB=m -+CONFIG_RT2800USB_RT3573=y -+CONFIG_RT2800USB_RT53XX=y -+CONFIG_RT2800USB_RT55XX=y -+CONFIG_RT2800USB_UNKNOWN=y -+CONFIG_RTL8187=m -+CONFIG_RTL8192CU=m -+CONFIG_USB_ZD1201=m -+CONFIG_ZD1211RW=m -+CONFIG_MAC80211_HWSIM=m -+CONFIG_USB_NET_RNDIS_WLAN=m -+CONFIG_WIMAX_I2400M_USB=m -+CONFIG_IEEE802154_AT86RF230=m -+CONFIG_IEEE802154_MRF24J40=m -+CONFIG_IEEE802154_CC2520=m -+CONFIG_INPUT_POLLDEV=m -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_JOYDEV=m -+CONFIG_INPUT_EVDEV=m -+# CONFIG_KEYBOARD_ATKBD is not set -+CONFIG_KEYBOARD_GPIO=m -+# CONFIG_INPUT_MOUSE is not set -+CONFIG_INPUT_JOYSTICK=y -+CONFIG_JOYSTICK_IFORCE=m -+CONFIG_JOYSTICK_IFORCE_USB=y -+CONFIG_JOYSTICK_XPAD=m -+CONFIG_JOYSTICK_XPAD_FF=y -+CONFIG_JOYSTICK_XPAD_LEDS=y -+CONFIG_JOYSTICK_RPISENSE=m -+CONFIG_INPUT_TOUCHSCREEN=y -+CONFIG_TOUCHSCREEN_ADS7846=m -+CONFIG_TOUCHSCREEN_EGALAX=m -+CONFIG_TOUCHSCREEN_RPI_FT5406=m -+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m -+CONFIG_TOUCHSCREEN_STMPE=m -+CONFIG_INPUT_MISC=y -+CONFIG_INPUT_AD714X=m -+CONFIG_INPUT_ATI_REMOTE2=m -+CONFIG_INPUT_KEYSPAN_REMOTE=m -+CONFIG_INPUT_POWERMATE=m -+CONFIG_INPUT_YEALINK=m -+CONFIG_INPUT_CM109=m -+CONFIG_INPUT_UINPUT=m -+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -+CONFIG_INPUT_ADXL34X=m -+CONFIG_INPUT_CMA3000=m -+CONFIG_SERIO=m -+CONFIG_SERIO_RAW=m -+CONFIG_GAMEPORT=m -+CONFIG_GAMEPORT_NS558=m -+CONFIG_GAMEPORT_L4=m -+CONFIG_BRCM_CHAR_DRIVERS=y -+CONFIG_BCM_VC_CMA=y -+CONFIG_BCM_VCIO=y -+CONFIG_BCM_VC_SM=y -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_DEVKMEM is not set -+CONFIG_SERIAL_8250=y -+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -+CONFIG_SERIAL_8250_CONSOLE=y -+# CONFIG_SERIAL_8250_DMA is not set -+CONFIG_SERIAL_8250_NR_UARTS=1 -+CONFIG_SERIAL_8250_RUNTIME_UARTS=0 -+CONFIG_SERIAL_8250_EXTENDED=y -+CONFIG_SERIAL_8250_SHARE_IRQ=y -+CONFIG_SERIAL_8250_BCM2835AUX=y -+CONFIG_SERIAL_OF_PLATFORM=y -+CONFIG_SERIAL_AMBA_PL011=y -+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -+CONFIG_SERIAL_SC16IS7XX=m -+CONFIG_SERIAL_SC16IS7XX_SPI=y -+CONFIG_TTY_PRINTK=y -+CONFIG_HW_RANDOM=y -+CONFIG_RAW_DRIVER=y -+CONFIG_I2C=y -+CONFIG_I2C_CHARDEV=m -+CONFIG_I2C_MUX_PCA954x=m -+CONFIG_I2C_BCM2708=m -+CONFIG_I2C_BCM2835=m -+CONFIG_I2C_GPIO=m -+CONFIG_SPI=y -+CONFIG_SPI_BCM2835=m -+CONFIG_SPI_BCM2835AUX=m -+CONFIG_SPI_SPIDEV=y -+CONFIG_PPS=m -+CONFIG_PPS_CLIENT_LDISC=m -+CONFIG_PPS_CLIENT_GPIO=m -+CONFIG_GPIO_SYSFS=y -+CONFIG_GPIO_ARIZONA=m -+CONFIG_GPIO_STMPE=y -+CONFIG_GPIO_MCP23S08=m -+CONFIG_W1=m -+CONFIG_W1_MASTER_DS2490=m -+CONFIG_W1_MASTER_DS2482=m -+CONFIG_W1_MASTER_DS1WM=m -+CONFIG_W1_MASTER_GPIO=m -+CONFIG_W1_SLAVE_THERM=m -+CONFIG_W1_SLAVE_SMEM=m -+CONFIG_W1_SLAVE_DS2408=m -+CONFIG_W1_SLAVE_DS2413=m -+CONFIG_W1_SLAVE_DS2406=m -+CONFIG_W1_SLAVE_DS2423=m -+CONFIG_W1_SLAVE_DS2431=m -+CONFIG_W1_SLAVE_DS2433=m -+CONFIG_W1_SLAVE_DS2760=m -+CONFIG_W1_SLAVE_DS2780=m -+CONFIG_W1_SLAVE_DS2781=m -+CONFIG_W1_SLAVE_DS28E04=m -+CONFIG_W1_SLAVE_BQ27000=m -+CONFIG_POWER_RESET=y -+CONFIG_POWER_RESET_GPIO=y -+CONFIG_BATTERY_DS2760=m -+CONFIG_HWMON=m -+CONFIG_SENSORS_LM75=m -+CONFIG_SENSORS_SHT21=m -+CONFIG_SENSORS_SHTC1=m -+CONFIG_SENSORS_INA2XX=m -+CONFIG_THERMAL=y -+CONFIG_THERMAL_BCM2835=y -+CONFIG_WATCHDOG=y -+CONFIG_BCM2835_WDT=y -+CONFIG_UCB1400_CORE=m -+CONFIG_MFD_STMPE=y -+CONFIG_STMPE_SPI=y -+CONFIG_MFD_ARIZONA_I2C=m -+CONFIG_MFD_ARIZONA_SPI=m -+CONFIG_MFD_WM5102=y -+CONFIG_MEDIA_SUPPORT=m -+CONFIG_MEDIA_CAMERA_SUPPORT=y -+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -+CONFIG_MEDIA_RADIO_SUPPORT=y -+CONFIG_MEDIA_RC_SUPPORT=y -+CONFIG_MEDIA_CONTROLLER=y -+CONFIG_LIRC=m -+CONFIG_RC_DEVICES=y -+CONFIG_RC_ATI_REMOTE=m -+CONFIG_IR_IMON=m -+CONFIG_IR_MCEUSB=m -+CONFIG_IR_REDRAT3=m -+CONFIG_IR_STREAMZAP=m -+CONFIG_IR_IGUANA=m -+CONFIG_IR_TTUSBIR=m -+CONFIG_RC_LOOPBACK=m -+CONFIG_IR_GPIO_CIR=m -+CONFIG_MEDIA_USB_SUPPORT=y -+CONFIG_USB_VIDEO_CLASS=m -+CONFIG_USB_M5602=m -+CONFIG_USB_STV06XX=m -+CONFIG_USB_GL860=m -+CONFIG_USB_GSPCA_BENQ=m -+CONFIG_USB_GSPCA_CONEX=m -+CONFIG_USB_GSPCA_CPIA1=m -+CONFIG_USB_GSPCA_DTCS033=m -+CONFIG_USB_GSPCA_ETOMS=m -+CONFIG_USB_GSPCA_FINEPIX=m -+CONFIG_USB_GSPCA_JEILINJ=m -+CONFIG_USB_GSPCA_JL2005BCD=m -+CONFIG_USB_GSPCA_KINECT=m -+CONFIG_USB_GSPCA_KONICA=m -+CONFIG_USB_GSPCA_MARS=m -+CONFIG_USB_GSPCA_MR97310A=m -+CONFIG_USB_GSPCA_NW80X=m -+CONFIG_USB_GSPCA_OV519=m -+CONFIG_USB_GSPCA_OV534=m -+CONFIG_USB_GSPCA_OV534_9=m -+CONFIG_USB_GSPCA_PAC207=m -+CONFIG_USB_GSPCA_PAC7302=m -+CONFIG_USB_GSPCA_PAC7311=m -+CONFIG_USB_GSPCA_SE401=m -+CONFIG_USB_GSPCA_SN9C2028=m -+CONFIG_USB_GSPCA_SN9C20X=m -+CONFIG_USB_GSPCA_SONIXB=m -+CONFIG_USB_GSPCA_SONIXJ=m -+CONFIG_USB_GSPCA_SPCA500=m -+CONFIG_USB_GSPCA_SPCA501=m -+CONFIG_USB_GSPCA_SPCA505=m -+CONFIG_USB_GSPCA_SPCA506=m -+CONFIG_USB_GSPCA_SPCA508=m -+CONFIG_USB_GSPCA_SPCA561=m -+CONFIG_USB_GSPCA_SPCA1528=m -+CONFIG_USB_GSPCA_SQ905=m -+CONFIG_USB_GSPCA_SQ905C=m -+CONFIG_USB_GSPCA_SQ930X=m -+CONFIG_USB_GSPCA_STK014=m -+CONFIG_USB_GSPCA_STK1135=m -+CONFIG_USB_GSPCA_STV0680=m -+CONFIG_USB_GSPCA_SUNPLUS=m -+CONFIG_USB_GSPCA_T613=m -+CONFIG_USB_GSPCA_TOPRO=m -+CONFIG_USB_GSPCA_TV8532=m -+CONFIG_USB_GSPCA_VC032X=m -+CONFIG_USB_GSPCA_VICAM=m -+CONFIG_USB_GSPCA_XIRLINK_CIT=m -+CONFIG_USB_GSPCA_ZC3XX=m -+CONFIG_USB_PWC=m -+CONFIG_VIDEO_CPIA2=m -+CONFIG_USB_ZR364XX=m -+CONFIG_USB_STKWEBCAM=m -+CONFIG_USB_S2255=m -+CONFIG_VIDEO_USBTV=m -+CONFIG_VIDEO_PVRUSB2=m -+CONFIG_VIDEO_HDPVR=m -+CONFIG_VIDEO_USBVISION=m -+CONFIG_VIDEO_STK1160_COMMON=m -+CONFIG_VIDEO_STK1160_AC97=y -+CONFIG_VIDEO_GO7007=m -+CONFIG_VIDEO_GO7007_USB=m -+CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m -+CONFIG_VIDEO_AU0828=m -+CONFIG_VIDEO_AU0828_RC=y -+CONFIG_VIDEO_CX231XX=m -+CONFIG_VIDEO_CX231XX_ALSA=m -+CONFIG_VIDEO_CX231XX_DVB=m -+CONFIG_VIDEO_TM6000=m -+CONFIG_VIDEO_TM6000_ALSA=m -+CONFIG_VIDEO_TM6000_DVB=m -+CONFIG_DVB_USB=m -+CONFIG_DVB_USB_A800=m -+CONFIG_DVB_USB_DIBUSB_MB=m -+CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y -+CONFIG_DVB_USB_DIBUSB_MC=m -+CONFIG_DVB_USB_DIB0700=m -+CONFIG_DVB_USB_UMT_010=m -+CONFIG_DVB_USB_CXUSB=m -+CONFIG_DVB_USB_M920X=m -+CONFIG_DVB_USB_DIGITV=m -+CONFIG_DVB_USB_VP7045=m -+CONFIG_DVB_USB_VP702X=m -+CONFIG_DVB_USB_GP8PSK=m -+CONFIG_DVB_USB_NOVA_T_USB2=m -+CONFIG_DVB_USB_TTUSB2=m -+CONFIG_DVB_USB_DTT200U=m -+CONFIG_DVB_USB_OPERA1=m -+CONFIG_DVB_USB_AF9005=m -+CONFIG_DVB_USB_AF9005_REMOTE=m -+CONFIG_DVB_USB_PCTV452E=m -+CONFIG_DVB_USB_DW2102=m -+CONFIG_DVB_USB_CINERGY_T2=m -+CONFIG_DVB_USB_DTV5100=m -+CONFIG_DVB_USB_FRIIO=m -+CONFIG_DVB_USB_AZ6027=m -+CONFIG_DVB_USB_TECHNISAT_USB2=m -+CONFIG_DVB_USB_V2=m -+CONFIG_DVB_USB_AF9015=m -+CONFIG_DVB_USB_AF9035=m -+CONFIG_DVB_USB_ANYSEE=m -+CONFIG_DVB_USB_AU6610=m -+CONFIG_DVB_USB_AZ6007=m -+CONFIG_DVB_USB_CE6230=m -+CONFIG_DVB_USB_EC168=m -+CONFIG_DVB_USB_GL861=m -+CONFIG_DVB_USB_LME2510=m -+CONFIG_DVB_USB_MXL111SF=m -+CONFIG_DVB_USB_RTL28XXU=m -+CONFIG_DVB_USB_DVBSKY=m -+CONFIG_SMS_USB_DRV=m -+CONFIG_DVB_B2C2_FLEXCOP_USB=m -+CONFIG_DVB_AS102=m -+CONFIG_VIDEO_EM28XX=m -+CONFIG_VIDEO_EM28XX_V4L2=m -+CONFIG_VIDEO_EM28XX_ALSA=m -+CONFIG_VIDEO_EM28XX_DVB=m -+CONFIG_V4L_PLATFORM_DRIVERS=y -+CONFIG_VIDEO_BCM2835=y -+CONFIG_VIDEO_BCM2835_MMAL=m -+CONFIG_RADIO_SI470X=y -+CONFIG_USB_SI470X=m -+CONFIG_I2C_SI470X=m -+CONFIG_RADIO_SI4713=m -+CONFIG_I2C_SI4713=m -+CONFIG_USB_MR800=m -+CONFIG_USB_DSBR=m -+CONFIG_RADIO_SHARK=m -+CONFIG_RADIO_SHARK2=m -+CONFIG_USB_KEENE=m -+CONFIG_USB_MA901=m -+CONFIG_RADIO_TEA5764=m -+CONFIG_RADIO_SAA7706H=m -+CONFIG_RADIO_TEF6862=m -+CONFIG_RADIO_WL1273=m -+CONFIG_RADIO_WL128X=m -+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set -+CONFIG_VIDEO_UDA1342=m -+CONFIG_VIDEO_SONY_BTF_MPX=m -+CONFIG_VIDEO_TVP5150=m -+CONFIG_VIDEO_TW2804=m -+CONFIG_VIDEO_TW9903=m -+CONFIG_VIDEO_TW9906=m -+CONFIG_VIDEO_OV7640=m -+CONFIG_VIDEO_MT9V011=m -+CONFIG_DRM=m -+CONFIG_DRM_LOAD_EDID_FIRMWARE=y -+CONFIG_DRM_UDL=m -+CONFIG_DRM_VC4=m -+CONFIG_FB=y -+CONFIG_FB_BCM2708=y -+CONFIG_FB_UDL=m -+CONFIG_FB_SSD1307=m -+CONFIG_FB_RPISENSE=m -+# CONFIG_BACKLIGHT_GENERIC is not set -+CONFIG_BACKLIGHT_RPI=m -+CONFIG_BACKLIGHT_GPIO=m -+CONFIG_FRAMEBUFFER_CONSOLE=y -+CONFIG_LOGO=y -+# CONFIG_LOGO_LINUX_MONO is not set -+# CONFIG_LOGO_LINUX_VGA16 is not set -+CONFIG_SOUND=y -+CONFIG_SND=m -+CONFIG_SND_SEQUENCER=m -+CONFIG_SND_SEQ_DUMMY=m -+CONFIG_SND_MIXER_OSS=m -+CONFIG_SND_PCM_OSS=m -+CONFIG_SND_SEQUENCER_OSS=y -+CONFIG_SND_HRTIMER=m -+CONFIG_SND_DUMMY=m -+CONFIG_SND_ALOOP=m -+CONFIG_SND_VIRMIDI=m -+CONFIG_SND_MTPAV=m -+CONFIG_SND_SERIAL_U16550=m -+CONFIG_SND_MPU401=m -+CONFIG_SND_BCM2835=m -+CONFIG_SND_USB_AUDIO=m -+CONFIG_SND_USB_UA101=m -+CONFIG_SND_USB_CAIAQ=m -+CONFIG_SND_USB_CAIAQ_INPUT=y -+CONFIG_SND_USB_6FIRE=m -+CONFIG_SND_SOC=m -+CONFIG_SND_BCM2835_SOC_I2S=m -+CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m -+CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m -+CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m -+CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m -+CONFIG_SND_BCM2708_SOC_RPI_DAC=m -+CONFIG_SND_BCM2708_SOC_RPI_PROTO=m -+CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m -+CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI=m -+CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m -+CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI=m -+CONFIG_SND_BCM2708_SOC_RASPIDAC3=m -+CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m -+CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m -+CONFIG_SND_DIGIDAC1_SOUNDCARD=m -+CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m -+CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m -+CONFIG_SND_PISOUND=m -+CONFIG_SND_SOC_ADAU1701=m -+CONFIG_SND_SOC_AK4554=m -+CONFIG_SND_SOC_WM8804_I2C=m -+CONFIG_SND_SIMPLE_CARD=m -+CONFIG_SOUND_PRIME=m -+CONFIG_HIDRAW=y -+CONFIG_UHID=m -+CONFIG_HID_A4TECH=m -+CONFIG_HID_ACRUX=m -+CONFIG_HID_APPLE=m -+CONFIG_HID_BELKIN=m -+CONFIG_HID_BETOP_FF=m -+CONFIG_HID_CHERRY=m -+CONFIG_HID_CHICONY=m -+CONFIG_HID_CYPRESS=m -+CONFIG_HID_DRAGONRISE=m -+CONFIG_HID_EMS_FF=m -+CONFIG_HID_ELECOM=m -+CONFIG_HID_ELO=m -+CONFIG_HID_EZKEY=m -+CONFIG_HID_GEMBIRD=m -+CONFIG_HID_HOLTEK=m -+CONFIG_HID_KEYTOUCH=m -+CONFIG_HID_KYE=m -+CONFIG_HID_UCLOGIC=m -+CONFIG_HID_WALTOP=m -+CONFIG_HID_GYRATION=m -+CONFIG_HID_TWINHAN=m -+CONFIG_HID_KENSINGTON=m -+CONFIG_HID_LCPOWER=m -+CONFIG_HID_LOGITECH=m -+CONFIG_HID_LOGITECH_DJ=m -+CONFIG_LOGITECH_FF=y -+CONFIG_LOGIRUMBLEPAD2_FF=y -+CONFIG_LOGIG940_FF=y -+CONFIG_HID_MAGICMOUSE=m -+CONFIG_HID_MICROSOFT=m -+CONFIG_HID_MONTEREY=m -+CONFIG_HID_MULTITOUCH=m -+CONFIG_HID_NTRIG=m -+CONFIG_HID_ORTEK=m -+CONFIG_HID_PANTHERLORD=m -+CONFIG_HID_PETALYNX=m -+CONFIG_HID_PICOLCD=m -+CONFIG_HID_ROCCAT=m -+CONFIG_HID_SAMSUNG=m -+CONFIG_HID_SONY=m -+CONFIG_HID_SPEEDLINK=m -+CONFIG_HID_SUNPLUS=m -+CONFIG_HID_GREENASIA=m -+CONFIG_HID_SMARTJOYPLUS=m -+CONFIG_HID_TOPSEED=m -+CONFIG_HID_THINGM=m -+CONFIG_HID_THRUSTMASTER=m -+CONFIG_HID_WACOM=m -+CONFIG_HID_WIIMOTE=m -+CONFIG_HID_XINMO=m -+CONFIG_HID_ZEROPLUS=m -+CONFIG_HID_ZYDACRON=m -+CONFIG_HID_PID=y -+CONFIG_USB_HIDDEV=y -+CONFIG_USB=y -+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -+CONFIG_USB_MON=m -+CONFIG_USB_DWCOTG=y -+CONFIG_USB_PRINTER=m -+CONFIG_USB_STORAGE=y -+CONFIG_USB_STORAGE_REALTEK=m -+CONFIG_USB_STORAGE_DATAFAB=m -+CONFIG_USB_STORAGE_FREECOM=m -+CONFIG_USB_STORAGE_ISD200=m -+CONFIG_USB_STORAGE_USBAT=m -+CONFIG_USB_STORAGE_SDDR09=m -+CONFIG_USB_STORAGE_SDDR55=m -+CONFIG_USB_STORAGE_JUMPSHOT=m -+CONFIG_USB_STORAGE_ALAUDA=m -+CONFIG_USB_STORAGE_ONETOUCH=m -+CONFIG_USB_STORAGE_KARMA=m -+CONFIG_USB_STORAGE_CYPRESS_ATACB=m -+CONFIG_USB_STORAGE_ENE_UB6250=m -+CONFIG_USB_MDC800=m -+CONFIG_USB_MICROTEK=m -+CONFIG_USBIP_CORE=m -+CONFIG_USBIP_VHCI_HCD=m -+CONFIG_USBIP_HOST=m -+CONFIG_USB_DWC2=m -+CONFIG_USB_SERIAL=m -+CONFIG_USB_SERIAL_GENERIC=y -+CONFIG_USB_SERIAL_AIRCABLE=m -+CONFIG_USB_SERIAL_ARK3116=m -+CONFIG_USB_SERIAL_BELKIN=m -+CONFIG_USB_SERIAL_CH341=m -+CONFIG_USB_SERIAL_WHITEHEAT=m -+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -+CONFIG_USB_SERIAL_CP210X=m -+CONFIG_USB_SERIAL_CYPRESS_M8=m -+CONFIG_USB_SERIAL_EMPEG=m -+CONFIG_USB_SERIAL_FTDI_SIO=m -+CONFIG_USB_SERIAL_VISOR=m -+CONFIG_USB_SERIAL_IPAQ=m -+CONFIG_USB_SERIAL_IR=m -+CONFIG_USB_SERIAL_EDGEPORT=m -+CONFIG_USB_SERIAL_EDGEPORT_TI=m -+CONFIG_USB_SERIAL_F81232=m -+CONFIG_USB_SERIAL_GARMIN=m -+CONFIG_USB_SERIAL_IPW=m -+CONFIG_USB_SERIAL_IUU=m -+CONFIG_USB_SERIAL_KEYSPAN_PDA=m -+CONFIG_USB_SERIAL_KEYSPAN=m -+CONFIG_USB_SERIAL_KLSI=m -+CONFIG_USB_SERIAL_KOBIL_SCT=m -+CONFIG_USB_SERIAL_MCT_U232=m -+CONFIG_USB_SERIAL_METRO=m -+CONFIG_USB_SERIAL_MOS7720=m -+CONFIG_USB_SERIAL_MOS7840=m -+CONFIG_USB_SERIAL_NAVMAN=m -+CONFIG_USB_SERIAL_PL2303=m -+CONFIG_USB_SERIAL_OTI6858=m -+CONFIG_USB_SERIAL_QCAUX=m -+CONFIG_USB_SERIAL_QUALCOMM=m -+CONFIG_USB_SERIAL_SPCP8X5=m -+CONFIG_USB_SERIAL_SAFE=m -+CONFIG_USB_SERIAL_SIERRAWIRELESS=m -+CONFIG_USB_SERIAL_SYMBOL=m -+CONFIG_USB_SERIAL_TI=m -+CONFIG_USB_SERIAL_CYBERJACK=m -+CONFIG_USB_SERIAL_XIRCOM=m -+CONFIG_USB_SERIAL_OPTION=m -+CONFIG_USB_SERIAL_OMNINET=m -+CONFIG_USB_SERIAL_OPTICON=m -+CONFIG_USB_SERIAL_XSENS_MT=m -+CONFIG_USB_SERIAL_WISHBONE=m -+CONFIG_USB_SERIAL_SSU100=m -+CONFIG_USB_SERIAL_QT2=m -+CONFIG_USB_SERIAL_DEBUG=m -+CONFIG_USB_EMI62=m -+CONFIG_USB_EMI26=m -+CONFIG_USB_ADUTUX=m -+CONFIG_USB_SEVSEG=m -+CONFIG_USB_RIO500=m -+CONFIG_USB_LEGOTOWER=m -+CONFIG_USB_LCD=m -+CONFIG_USB_CYPRESS_CY7C63=m -+CONFIG_USB_CYTHERM=m -+CONFIG_USB_IDMOUSE=m -+CONFIG_USB_FTDI_ELAN=m -+CONFIG_USB_APPLEDISPLAY=m -+CONFIG_USB_LD=m -+CONFIG_USB_TRANCEVIBRATOR=m -+CONFIG_USB_IOWARRIOR=m -+CONFIG_USB_TEST=m -+CONFIG_USB_ISIGHTFW=m -+CONFIG_USB_YUREX=m -+CONFIG_USB_ATM=m -+CONFIG_USB_SPEEDTOUCH=m -+CONFIG_USB_CXACRU=m -+CONFIG_USB_UEAGLEATM=m -+CONFIG_USB_XUSBATM=m -+CONFIG_USB_GADGET=m -+CONFIG_USB_ZERO=m -+CONFIG_USB_AUDIO=m -+CONFIG_USB_ETH=m -+CONFIG_USB_GADGETFS=m -+CONFIG_USB_MASS_STORAGE=m -+CONFIG_USB_G_SERIAL=m -+CONFIG_USB_MIDI_GADGET=m -+CONFIG_USB_G_PRINTER=m -+CONFIG_USB_CDC_COMPOSITE=m -+CONFIG_USB_G_ACM_MS=m -+CONFIG_USB_G_MULTI=m -+CONFIG_USB_G_HID=m -+CONFIG_USB_G_WEBCAM=m -+CONFIG_MMC=y -+CONFIG_MMC_BLOCK_MINORS=32 -+CONFIG_MMC_BCM2835=y -+CONFIG_MMC_BCM2835_DMA=y -+CONFIG_MMC_BCM2835_SDHOST=y -+CONFIG_MMC_SDHCI=y -+CONFIG_MMC_SDHCI_PLTFM=y -+CONFIG_MMC_SPI=m -+CONFIG_LEDS_CLASS=y -+CONFIG_LEDS_GPIO=y -+CONFIG_LEDS_TRIGGER_TIMER=y -+CONFIG_LEDS_TRIGGER_ONESHOT=y -+CONFIG_LEDS_TRIGGER_HEARTBEAT=y -+CONFIG_LEDS_TRIGGER_BACKLIGHT=y -+CONFIG_LEDS_TRIGGER_CPU=y -+CONFIG_LEDS_TRIGGER_GPIO=y -+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -+CONFIG_LEDS_TRIGGER_TRANSIENT=m -+CONFIG_LEDS_TRIGGER_CAMERA=m -+CONFIG_LEDS_TRIGGER_INPUT=y -+CONFIG_LEDS_TRIGGER_PANIC=y -+CONFIG_RTC_CLASS=y -+# CONFIG_RTC_HCTOSYS is not set -+CONFIG_RTC_DRV_ABX80X=m -+CONFIG_RTC_DRV_DS1307=m -+CONFIG_RTC_DRV_DS1374=m -+CONFIG_RTC_DRV_DS1672=m -+CONFIG_RTC_DRV_MAX6900=m -+CONFIG_RTC_DRV_RS5C372=m -+CONFIG_RTC_DRV_ISL1208=m -+CONFIG_RTC_DRV_ISL12022=m -+CONFIG_RTC_DRV_X1205=m -+CONFIG_RTC_DRV_PCF8523=m -+CONFIG_RTC_DRV_PCF8563=m -+CONFIG_RTC_DRV_PCF8583=m -+CONFIG_RTC_DRV_M41T80=m -+CONFIG_RTC_DRV_BQ32K=m -+CONFIG_RTC_DRV_S35390A=m -+CONFIG_RTC_DRV_FM3130=m -+CONFIG_RTC_DRV_RX8581=m -+CONFIG_RTC_DRV_RX8025=m -+CONFIG_RTC_DRV_EM3027=m -+CONFIG_RTC_DRV_M41T93=m -+CONFIG_RTC_DRV_M41T94=m -+CONFIG_RTC_DRV_DS1302=m -+CONFIG_RTC_DRV_DS1305=m -+CONFIG_RTC_DRV_DS1390=m -+CONFIG_RTC_DRV_R9701=m -+CONFIG_RTC_DRV_RX4581=m -+CONFIG_RTC_DRV_RS5C348=m -+CONFIG_RTC_DRV_MAX6902=m -+CONFIG_RTC_DRV_PCF2123=m -+CONFIG_RTC_DRV_DS3232=m -+CONFIG_RTC_DRV_PCF2127=m -+CONFIG_RTC_DRV_RV3029C2=m -+CONFIG_DMADEVICES=y -+CONFIG_DMA_BCM2835=y -+CONFIG_DMA_BCM2708=y -+CONFIG_UIO=m -+CONFIG_UIO_PDRV_GENIRQ=m -+CONFIG_STAGING=y -+CONFIG_PRISM2_USB=m -+CONFIG_R8712U=m -+CONFIG_R8188EU=m -+CONFIG_VT6656=m -+CONFIG_SPEAKUP=m -+CONFIG_SPEAKUP_SYNTH_SOFT=m -+CONFIG_STAGING_MEDIA=y -+CONFIG_LIRC_STAGING=y -+CONFIG_LIRC_IMON=m -+CONFIG_LIRC_RPI=m -+CONFIG_LIRC_SASEM=m -+CONFIG_LIRC_SERIAL=m -+CONFIG_FB_TFT=m -+CONFIG_FB_TFT_AGM1264K_FL=m -+CONFIG_FB_TFT_BD663474=m -+CONFIG_FB_TFT_HX8340BN=m -+CONFIG_FB_TFT_HX8347D=m -+CONFIG_FB_TFT_HX8353D=m -+CONFIG_FB_TFT_HX8357D=m -+CONFIG_FB_TFT_ILI9163=m -+CONFIG_FB_TFT_ILI9320=m -+CONFIG_FB_TFT_ILI9325=m -+CONFIG_FB_TFT_ILI9340=m -+CONFIG_FB_TFT_ILI9341=m -+CONFIG_FB_TFT_ILI9481=m -+CONFIG_FB_TFT_ILI9486=m -+CONFIG_FB_TFT_PCD8544=m -+CONFIG_FB_TFT_RA8875=m -+CONFIG_FB_TFT_S6D02A1=m -+CONFIG_FB_TFT_S6D1121=m -+CONFIG_FB_TFT_SSD1289=m -+CONFIG_FB_TFT_SSD1306=m -+CONFIG_FB_TFT_SSD1331=m -+CONFIG_FB_TFT_SSD1351=m -+CONFIG_FB_TFT_ST7735R=m -+CONFIG_FB_TFT_TINYLCD=m -+CONFIG_FB_TFT_TLS8204=m -+CONFIG_FB_TFT_UC1701=m -+CONFIG_FB_TFT_UPD161704=m -+CONFIG_FB_TFT_WATTEROTT=m -+CONFIG_FB_FLEX=m -+CONFIG_FB_TFT_FBTFT_DEVICE=m -+CONFIG_MAILBOX=y -+CONFIG_BCM2835_MBOX=y -+# CONFIG_IOMMU_SUPPORT is not set -+CONFIG_RASPBERRYPI_POWER=y -+CONFIG_EXTCON=m -+CONFIG_EXTCON_ARIZONA=m -+CONFIG_IIO=m -+CONFIG_IIO_BUFFER=y -+CONFIG_IIO_BUFFER_CB=m -+CONFIG_IIO_KFIFO_BUF=m -+CONFIG_MCP320X=m -+CONFIG_MCP3422=m -+CONFIG_DHT11=m -+CONFIG_HTU21=m -+CONFIG_PWM_BCM2835=m -+CONFIG_PWM_PCA9685=m -+CONFIG_RASPBERRYPI_FIRMWARE=y -+CONFIG_EXT4_FS=y -+CONFIG_EXT4_FS_POSIX_ACL=y -+CONFIG_EXT4_FS_SECURITY=y -+CONFIG_REISERFS_FS=m -+CONFIG_REISERFS_FS_XATTR=y -+CONFIG_REISERFS_FS_POSIX_ACL=y -+CONFIG_REISERFS_FS_SECURITY=y -+CONFIG_JFS_FS=m -+CONFIG_JFS_POSIX_ACL=y -+CONFIG_JFS_SECURITY=y -+CONFIG_JFS_STATISTICS=y -+CONFIG_XFS_FS=m -+CONFIG_XFS_QUOTA=y -+CONFIG_XFS_POSIX_ACL=y -+CONFIG_XFS_RT=y -+CONFIG_GFS2_FS=m -+CONFIG_OCFS2_FS=m -+CONFIG_BTRFS_FS=m -+CONFIG_BTRFS_FS_POSIX_ACL=y -+CONFIG_NILFS2_FS=m -+CONFIG_F2FS_FS=y -+CONFIG_FANOTIFY=y -+CONFIG_QFMT_V1=m -+CONFIG_QFMT_V2=m -+CONFIG_AUTOFS4_FS=y -+CONFIG_FUSE_FS=m -+CONFIG_CUSE=m -+CONFIG_OVERLAY_FS=m -+CONFIG_FSCACHE=y -+CONFIG_FSCACHE_STATS=y -+CONFIG_FSCACHE_HISTOGRAM=y -+CONFIG_CACHEFILES=y -+CONFIG_ISO9660_FS=m -+CONFIG_JOLIET=y -+CONFIG_ZISOFS=y -+CONFIG_UDF_FS=m -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_IOCHARSET="ascii" -+CONFIG_NTFS_FS=m -+CONFIG_NTFS_RW=y -+CONFIG_TMPFS=y -+CONFIG_TMPFS_POSIX_ACL=y -+CONFIG_ECRYPT_FS=m -+CONFIG_HFS_FS=m -+CONFIG_HFSPLUS_FS=m -+CONFIG_JFFS2_FS=m -+CONFIG_JFFS2_SUMMARY=y -+CONFIG_UBIFS_FS=m -+CONFIG_SQUASHFS=m -+CONFIG_SQUASHFS_XATTR=y -+CONFIG_SQUASHFS_LZO=y -+CONFIG_SQUASHFS_XZ=y -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3_ACL=y -+CONFIG_NFS_V4=y -+CONFIG_NFS_SWAP=y -+CONFIG_ROOT_NFS=y -+CONFIG_NFS_FSCACHE=y -+CONFIG_NFSD=m -+CONFIG_NFSD_V3_ACL=y -+CONFIG_NFSD_V4=y -+CONFIG_CIFS=m -+CONFIG_CIFS_WEAK_PW_HASH=y -+CONFIG_CIFS_UPCALL=y -+CONFIG_CIFS_XATTR=y -+CONFIG_CIFS_POSIX=y -+CONFIG_CIFS_ACL=y -+CONFIG_CIFS_DFS_UPCALL=y -+CONFIG_CIFS_SMB2=y -+CONFIG_CIFS_FSCACHE=y -+CONFIG_9P_FS=m -+CONFIG_9P_FS_POSIX_ACL=y -+CONFIG_NLS_DEFAULT="utf8" -+CONFIG_NLS_CODEPAGE_437=y -+CONFIG_NLS_CODEPAGE_737=m -+CONFIG_NLS_CODEPAGE_775=m -+CONFIG_NLS_CODEPAGE_850=m -+CONFIG_NLS_CODEPAGE_852=m -+CONFIG_NLS_CODEPAGE_855=m -+CONFIG_NLS_CODEPAGE_857=m -+CONFIG_NLS_CODEPAGE_860=m -+CONFIG_NLS_CODEPAGE_861=m -+CONFIG_NLS_CODEPAGE_862=m -+CONFIG_NLS_CODEPAGE_863=m -+CONFIG_NLS_CODEPAGE_864=m -+CONFIG_NLS_CODEPAGE_865=m -+CONFIG_NLS_CODEPAGE_866=m -+CONFIG_NLS_CODEPAGE_869=m -+CONFIG_NLS_CODEPAGE_936=m -+CONFIG_NLS_CODEPAGE_950=m -+CONFIG_NLS_CODEPAGE_932=m -+CONFIG_NLS_CODEPAGE_949=m -+CONFIG_NLS_CODEPAGE_874=m -+CONFIG_NLS_ISO8859_8=m -+CONFIG_NLS_CODEPAGE_1250=m -+CONFIG_NLS_CODEPAGE_1251=m -+CONFIG_NLS_ASCII=y -+CONFIG_NLS_ISO8859_1=m -+CONFIG_NLS_ISO8859_2=m -+CONFIG_NLS_ISO8859_3=m -+CONFIG_NLS_ISO8859_4=m -+CONFIG_NLS_ISO8859_5=m -+CONFIG_NLS_ISO8859_6=m -+CONFIG_NLS_ISO8859_7=m -+CONFIG_NLS_ISO8859_9=m -+CONFIG_NLS_ISO8859_13=m -+CONFIG_NLS_ISO8859_14=m -+CONFIG_NLS_ISO8859_15=m -+CONFIG_NLS_KOI8_R=m -+CONFIG_NLS_KOI8_U=m -+CONFIG_DLM=m -+CONFIG_PRINTK_TIME=y -+CONFIG_BOOT_PRINTK_DELAY=y -+CONFIG_DEBUG_MEMORY_INIT=y -+CONFIG_DETECT_HUNG_TASK=y -+CONFIG_TIMER_STATS=y -+CONFIG_LATENCYTOP=y -+CONFIG_IRQSOFF_TRACER=y -+CONFIG_SCHED_TRACER=y -+CONFIG_STACK_TRACER=y -+CONFIG_BLK_DEV_IO_TRACE=y -+# CONFIG_KPROBE_EVENT is not set -+CONFIG_FUNCTION_PROFILER=y -+CONFIG_KGDB=y -+CONFIG_KGDB_KDB=y -+CONFIG_KDB_KEYBOARD=y -+CONFIG_CRYPTO_USER=m -+CONFIG_CRYPTO_CRYPTD=m -+CONFIG_CRYPTO_CBC=y -+CONFIG_CRYPTO_CTS=m -+CONFIG_CRYPTO_XTS=m -+CONFIG_CRYPTO_XCBC=m -+CONFIG_CRYPTO_SHA512=m -+CONFIG_CRYPTO_TGR192=m -+CONFIG_CRYPTO_WP512=m -+CONFIG_CRYPTO_CAST5=m -+CONFIG_CRYPTO_DES=y -+CONFIG_CRYPTO_USER_API_SKCIPHER=m -+# CONFIG_CRYPTO_HW is not set -+CONFIG_ARM_CRYPTO=y -+CONFIG_CRYPTO_SHA1_ARM=m -+CONFIG_CRYPTO_AES_ARM=m -+CONFIG_CRC_ITU_T=y -+CONFIG_LIBCRC32C=y diff --git a/target/linux/brcm2708/patches-4.9/0094-Add-arm64-configuration-and-device-tree-differences.patch b/target/linux/brcm2708/patches-4.9/0094-Add-arm64-configuration-and-device-tree-differences.patch deleted file mode 100644 index 0cbb4d77f362..000000000000 --- a/target/linux/brcm2708/patches-4.9/0094-Add-arm64-configuration-and-device-tree-differences.patch +++ /dev/null @@ -1,1407 +0,0 @@ -From 64d1c392baa391243d0a7963379ab957d5d9b8b1 Mon Sep 17 00:00:00 2001 -From: Michael Zoran -Date: Wed, 24 Aug 2016 03:35:56 -0700 -Subject: [PATCH] Add arm64 configuration and device tree differences. Disable - MMC_BCM2835_SDHOST and MMC_BCM2835 since these drivers are crashing at the - moment. - -ARM64: Modify default config to get raspbian to boot (#1686) - -1. Enable emulation of deprecated instructions. -2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. -3. Switch the default governer to powersave. -4. Include the watchdog timer driver in the kernel image rather then a module. - -Tested with raspbian-jessie 2016-09-23. ---- - arch/arm64/Kconfig.platforms | 22 + - arch/arm64/boot/dts/broadcom/Makefile | 1 + - arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts | 3 + - arch/arm64/configs/bcmrpi3_defconfig | 1334 ++++++++++++++++++++++ - 4 files changed, 1360 insertions(+) - create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts - create mode 100644 arch/arm64/configs/bcmrpi3_defconfig - ---- a/arch/arm64/Kconfig.platforms -+++ b/arch/arm64/Kconfig.platforms -@@ -1,5 +1,27 @@ - menu "Platform selection" - -+config MACH_BCM2709 -+ bool -+ -+config ARCH_BCM2709 -+ bool "Broadcom BCM2709 family" -+ select MACH_BCM2709 -+ select HAVE_SMP -+ select ARM_AMBA -+ select COMMON_CLK -+ select ARCH_HAS_CPUFREQ -+ select GENERIC_CLOCKEVENTS -+ select MULTI_IRQ_HANDLER -+ select SPARSE_IRQ -+ select MFD_SYSCON -+ select VC4 -+ select USE_OF -+ select ARCH_REQUIRE_GPIOLIB -+ select PINCTRL -+ select PINCTRL_BCM2835 -+ help -+ This enables support for Broadcom BCM2709 boards. -+ - config ARCH_SUNXI - bool "Allwinner sunxi 64-bit SoC Family" - select GENERIC_IRQ_CHIP ---- a/arch/arm64/boot/dts/broadcom/Makefile -+++ b/arch/arm64/boot/dts/broadcom/Makefile -@@ -1,6 +1,7 @@ - dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb - dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb - dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb -+dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb - - always := $(dtb-y) - subdir-y := $(dts-dirs) ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts -@@ -0,0 +1,3 @@ -+#define RPI364 -+ -+#include "../../../../arm/boot/dts/bcm2710-rpi-3-b.dts" ---- /dev/null -+++ b/arch/arm64/configs/bcmrpi3_defconfig -@@ -0,0 +1,1334 @@ -+# CONFIG_ARM_PATCH_PHYS_VIRT is not set -+CONFIG_PHYS_OFFSET=0 -+CONFIG_LOCALVERSION="-v8" -+# CONFIG_LOCALVERSION_AUTO is not set -+CONFIG_64BIT=y -+CONFIG_SYSVIPC=y -+CONFIG_POSIX_MQUEUE=y -+CONFIG_NO_HZ=y -+CONFIG_HIGH_RES_TIMERS=y -+ -+# -+# ARM errata workarounds via the alternatives framework -+# -+CONFIG_ARM64_ERRATUM_826319=n -+CONFIG_ARM64_ERRATUM_827319=n -+CONFIG_ARM64_ERRATUM_824069=n -+CONFIG_ARM64_ERRATUM_819472=n -+CONFIG_ARM64_ERRATUM_832075=n -+CONFIG_ARM64_ERRATUM_845719=n -+CONFIG_ARM64_ERRATUM_843419=n -+CONFIG_CAVIUM_ERRATUM_22375=n -+CONFIG_CAVIUM_ERRATUM_23154=n -+CONFIG_CAVIUM_ERRATUM_27456=n -+CONFIG_ARM64_4K_PAGES=y -+CONFIG_ARM64_VA_BITS_39=y -+CONFIG_ARM64_VA_BITS=39 -+CONFIG_SCHED_MC=y -+CONFIG_NR_CPUS=4 -+CONFIG_HOTPLUG_CPU=y -+CONFIG_ARMV8_DEPRECATED=y -+CONFIG_SWP_EMULATION=y -+CONFIG_CP15_BARRIER_EMULATION=y -+CONFIG_SETEND_EMULATION=y -+ -+# -+# ARMv8.1 architectural features -+# -+CONFIG_ARM64_HW_AFDBM=y -+CONFIG_ARM64_PAN=y -+CONFIG_ARM64_LSE_ATOMICS=y -+CONFIG_ARM64_VHE=y -+ -+# -+# ARMv8.2 architectural features -+# -+CONFIG_ARM64_UAO=y -+CONFIG_ARM64_MODULE_CMODEL_LARGE=n -+CONFIG_RANDOMIZE_BASE=n -+ -+CONFIG_BSD_PROCESS_ACCT=y -+CONFIG_BSD_PROCESS_ACCT_V3=y -+CONFIG_TASKSTATS=y -+CONFIG_TASK_DELAY_ACCT=y -+CONFIG_TASK_XACCT=y -+CONFIG_TASK_IO_ACCOUNTING=y -+CONFIG_IKCONFIG=m -+CONFIG_IKCONFIG_PROC=y -+CONFIG_NMI_LOG_BUF_SHIFT=12 -+CONFIG_MEMCG=y -+CONFIG_BLK_CGROUP=y -+CONFIG_CGROUP_FREEZER=y -+CONFIG_CPUSETS=y -+CONFIG_CGROUP_DEVICE=y -+CONFIG_CGROUP_CPUACCT=y -+CONFIG_NAMESPACES=y -+CONFIG_USER_NS=y -+CONFIG_SCHED_AUTOGROUP=y -+CONFIG_BLK_DEV_INITRD=y -+CONFIG_EMBEDDED=y -+# CONFIG_COMPAT_BRK is not set -+CONFIG_PROFILING=y -+CONFIG_OPROFILE=m -+CONFIG_KPROBES=y -+CONFIG_JUMP_LABEL=y -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+CONFIG_MODVERSIONS=y -+CONFIG_MODULE_SRCVERSION_ALL=y -+CONFIG_TRIM_UNUSED_KSYMS=y -+CONFIG_BLK_DEV_THROTTLING=y -+CONFIG_PARTITION_ADVANCED=y -+CONFIG_MAC_PARTITION=y -+CONFIG_CFQ_GROUP_IOSCHED=y -+CONFIG_ARCH_BCM2709=y -+# CONFIG_CACHE_L2X0 is not set -+CONFIG_SMP=y -+CONFIG_HAVE_ARM_ARCH_TIMER=y -+CONFIG_VMSPLIT_2G=y -+CONFIG_PREEMPT_VOLUNTARY=y -+CONFIG_AEABI=y -+CONFIG_OABI_COMPAT=y -+# CONFIG_CPU_SW_DOMAIN_PAN is not set -+CONFIG_CLEANCACHE=y -+CONFIG_FRONTSWAP=y -+CONFIG_CMA=y -+CONFIG_ZSMALLOC=m -+CONFIG_PGTABLE_MAPPING=y -+CONFIG_UACCESS_WITH_MEMCPY=y -+CONFIG_SECCOMP=y -+# CONFIG_ATAGS is not set -+CONFIG_ZBOOT_ROM_TEXT=0x0 -+CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" -+CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y -+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -+CONFIG_CPU_FREQ_GOV_USERSPACE=y -+CONFIG_CPU_FREQ_GOV_ONDEMAND=y -+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y -+CONFIG_VFP=y -+CONFIG_NEON=y -+CONFIG_KERNEL_MODE_NEON=y -+CONFIG_BINFMT_MISC=m -+CONFIG_COMPAT=y -+CONFIG_SYSVIPC_COMPAT=y -+ -+# CONFIG_SUSPEND is not set -+CONFIG_PM=y -+CONFIG_NET=y -+CONFIG_PACKET=y -+CONFIG_UNIX=y -+CONFIG_XFRM_USER=y -+CONFIG_NET_KEY=m -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+CONFIG_IP_ADVANCED_ROUTER=y -+CONFIG_IP_MULTIPLE_TABLES=y -+CONFIG_IP_ROUTE_MULTIPATH=y -+CONFIG_IP_ROUTE_VERBOSE=y -+CONFIG_IP_PNP=y -+CONFIG_IP_PNP_DHCP=y -+CONFIG_IP_PNP_RARP=y -+CONFIG_NET_IPIP=m -+CONFIG_NET_IPGRE_DEMUX=m -+CONFIG_NET_IPGRE=m -+CONFIG_IP_MROUTE=y -+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y -+CONFIG_IP_PIMSM_V1=y -+CONFIG_IP_PIMSM_V2=y -+CONFIG_SYN_COOKIES=y -+CONFIG_INET_AH=m -+CONFIG_INET_ESP=m -+CONFIG_INET_IPCOMP=m -+CONFIG_INET_XFRM_MODE_TRANSPORT=m -+CONFIG_INET_XFRM_MODE_TUNNEL=m -+CONFIG_INET_XFRM_MODE_BEET=m -+CONFIG_INET_DIAG=m -+CONFIG_IPV6=m -+CONFIG_IPV6_ROUTER_PREF=y -+CONFIG_INET6_AH=m -+CONFIG_INET6_ESP=m -+CONFIG_INET6_IPCOMP=m -+CONFIG_IPV6_TUNNEL=m -+CONFIG_IPV6_MULTIPLE_TABLES=y -+CONFIG_IPV6_SUBTREES=y -+CONFIG_IPV6_MROUTE=y -+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y -+CONFIG_IPV6_PIMSM_V2=y -+CONFIG_NETFILTER=y -+CONFIG_NF_CONNTRACK=m -+CONFIG_NF_CONNTRACK_ZONES=y -+CONFIG_NF_CONNTRACK_EVENTS=y -+CONFIG_NF_CONNTRACK_TIMESTAMP=y -+CONFIG_NF_CT_PROTO_DCCP=m -+CONFIG_NF_CT_PROTO_UDPLITE=m -+CONFIG_NF_CONNTRACK_AMANDA=m -+CONFIG_NF_CONNTRACK_FTP=m -+CONFIG_NF_CONNTRACK_H323=m -+CONFIG_NF_CONNTRACK_IRC=m -+CONFIG_NF_CONNTRACK_NETBIOS_NS=m -+CONFIG_NF_CONNTRACK_SNMP=m -+CONFIG_NF_CONNTRACK_PPTP=m -+CONFIG_NF_CONNTRACK_SANE=m -+CONFIG_NF_CONNTRACK_SIP=m -+CONFIG_NF_CONNTRACK_TFTP=m -+CONFIG_NF_CT_NETLINK=m -+CONFIG_NETFILTER_XT_SET=m -+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m -+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -+CONFIG_NETFILTER_XT_TARGET_DSCP=m -+CONFIG_NETFILTER_XT_TARGET_HMARK=m -+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m -+CONFIG_NETFILTER_XT_TARGET_LED=m -+CONFIG_NETFILTER_XT_TARGET_LOG=m -+CONFIG_NETFILTER_XT_TARGET_MARK=m -+CONFIG_NETFILTER_XT_TARGET_NFLOG=m -+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m -+CONFIG_NETFILTER_XT_TARGET_TEE=m -+CONFIG_NETFILTER_XT_TARGET_TPROXY=m -+CONFIG_NETFILTER_XT_TARGET_TRACE=m -+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m -+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m -+CONFIG_NETFILTER_XT_MATCH_BPF=m -+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -+CONFIG_NETFILTER_XT_MATCH_COMMENT=m -+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m -+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -+CONFIG_NETFILTER_XT_MATCH_CPU=m -+CONFIG_NETFILTER_XT_MATCH_DCCP=m -+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m -+CONFIG_NETFILTER_XT_MATCH_DSCP=m -+CONFIG_NETFILTER_XT_MATCH_ESP=m -+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -+CONFIG_NETFILTER_XT_MATCH_HELPER=m -+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -+CONFIG_NETFILTER_XT_MATCH_IPVS=m -+CONFIG_NETFILTER_XT_MATCH_LENGTH=m -+CONFIG_NETFILTER_XT_MATCH_LIMIT=m -+CONFIG_NETFILTER_XT_MATCH_MAC=m -+CONFIG_NETFILTER_XT_MATCH_MARK=m -+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -+CONFIG_NETFILTER_XT_MATCH_NFACCT=m -+CONFIG_NETFILTER_XT_MATCH_OSF=m -+CONFIG_NETFILTER_XT_MATCH_OWNER=m -+CONFIG_NETFILTER_XT_MATCH_POLICY=m -+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -+CONFIG_NETFILTER_XT_MATCH_QUOTA=m -+CONFIG_NETFILTER_XT_MATCH_RATEEST=m -+CONFIG_NETFILTER_XT_MATCH_REALM=m -+CONFIG_NETFILTER_XT_MATCH_RECENT=m -+CONFIG_NETFILTER_XT_MATCH_SOCKET=m -+CONFIG_NETFILTER_XT_MATCH_STATE=m -+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -+CONFIG_NETFILTER_XT_MATCH_STRING=m -+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -+CONFIG_NETFILTER_XT_MATCH_TIME=m -+CONFIG_NETFILTER_XT_MATCH_U32=m -+CONFIG_IP_SET=m -+CONFIG_IP_SET_BITMAP_IP=m -+CONFIG_IP_SET_BITMAP_IPMAC=m -+CONFIG_IP_SET_BITMAP_PORT=m -+CONFIG_IP_SET_HASH_IP=m -+CONFIG_IP_SET_HASH_IPPORT=m -+CONFIG_IP_SET_HASH_IPPORTIP=m -+CONFIG_IP_SET_HASH_IPPORTNET=m -+CONFIG_IP_SET_HASH_NET=m -+CONFIG_IP_SET_HASH_NETPORT=m -+CONFIG_IP_SET_HASH_NETIFACE=m -+CONFIG_IP_SET_LIST_SET=m -+CONFIG_IP_VS=m -+CONFIG_IP_VS_PROTO_TCP=y -+CONFIG_IP_VS_PROTO_UDP=y -+CONFIG_IP_VS_PROTO_ESP=y -+CONFIG_IP_VS_PROTO_AH=y -+CONFIG_IP_VS_PROTO_SCTP=y -+CONFIG_IP_VS_RR=m -+CONFIG_IP_VS_WRR=m -+CONFIG_IP_VS_LC=m -+CONFIG_IP_VS_WLC=m -+CONFIG_IP_VS_LBLC=m -+CONFIG_IP_VS_LBLCR=m -+CONFIG_IP_VS_DH=m -+CONFIG_IP_VS_SH=m -+CONFIG_IP_VS_SED=m -+CONFIG_IP_VS_NQ=m -+CONFIG_IP_VS_FTP=m -+CONFIG_IP_VS_PE_SIP=m -+CONFIG_NF_CONNTRACK_IPV4=m -+CONFIG_IP_NF_IPTABLES=m -+CONFIG_IP_NF_MATCH_AH=m -+CONFIG_IP_NF_MATCH_ECN=m -+CONFIG_IP_NF_MATCH_RPFILTER=m -+CONFIG_IP_NF_MATCH_TTL=m -+CONFIG_IP_NF_FILTER=m -+CONFIG_IP_NF_TARGET_REJECT=m -+CONFIG_IP_NF_NAT=m -+CONFIG_IP_NF_TARGET_MASQUERADE=m -+CONFIG_IP_NF_TARGET_NETMAP=m -+CONFIG_IP_NF_TARGET_REDIRECT=m -+CONFIG_IP_NF_MANGLE=m -+CONFIG_IP_NF_TARGET_CLUSTERIP=m -+CONFIG_IP_NF_TARGET_ECN=m -+CONFIG_IP_NF_TARGET_TTL=m -+CONFIG_IP_NF_RAW=m -+CONFIG_IP_NF_ARPTABLES=m -+CONFIG_IP_NF_ARPFILTER=m -+CONFIG_IP_NF_ARP_MANGLE=m -+CONFIG_NF_CONNTRACK_IPV6=m -+CONFIG_IP6_NF_IPTABLES=m -+CONFIG_IP6_NF_MATCH_AH=m -+CONFIG_IP6_NF_MATCH_EUI64=m -+CONFIG_IP6_NF_MATCH_FRAG=m -+CONFIG_IP6_NF_MATCH_OPTS=m -+CONFIG_IP6_NF_MATCH_HL=m -+CONFIG_IP6_NF_MATCH_IPV6HEADER=m -+CONFIG_IP6_NF_MATCH_MH=m -+CONFIG_IP6_NF_MATCH_RPFILTER=m -+CONFIG_IP6_NF_MATCH_RT=m -+CONFIG_IP6_NF_TARGET_HL=m -+CONFIG_IP6_NF_FILTER=m -+CONFIG_IP6_NF_TARGET_REJECT=m -+CONFIG_IP6_NF_MANGLE=m -+CONFIG_IP6_NF_RAW=m -+CONFIG_IP6_NF_NAT=m -+CONFIG_IP6_NF_TARGET_MASQUERADE=m -+CONFIG_IP6_NF_TARGET_NPT=m -+CONFIG_BRIDGE_NF_EBTABLES=m -+CONFIG_BRIDGE_EBT_BROUTE=m -+CONFIG_BRIDGE_EBT_T_FILTER=m -+CONFIG_BRIDGE_EBT_T_NAT=m -+CONFIG_BRIDGE_EBT_802_3=m -+CONFIG_BRIDGE_EBT_AMONG=m -+CONFIG_BRIDGE_EBT_ARP=m -+CONFIG_BRIDGE_EBT_IP=m -+CONFIG_BRIDGE_EBT_IP6=m -+CONFIG_BRIDGE_EBT_LIMIT=m -+CONFIG_BRIDGE_EBT_MARK=m -+CONFIG_BRIDGE_EBT_PKTTYPE=m -+CONFIG_BRIDGE_EBT_STP=m -+CONFIG_BRIDGE_EBT_VLAN=m -+CONFIG_BRIDGE_EBT_ARPREPLY=m -+CONFIG_BRIDGE_EBT_DNAT=m -+CONFIG_BRIDGE_EBT_MARK_T=m -+CONFIG_BRIDGE_EBT_REDIRECT=m -+CONFIG_BRIDGE_EBT_SNAT=m -+CONFIG_BRIDGE_EBT_LOG=m -+CONFIG_BRIDGE_EBT_NFLOG=m -+CONFIG_SCTP_COOKIE_HMAC_SHA1=y -+CONFIG_ATM=m -+CONFIG_L2TP=m -+CONFIG_L2TP_V3=y -+CONFIG_L2TP_IP=m -+CONFIG_L2TP_ETH=m -+CONFIG_BRIDGE=m -+CONFIG_VLAN_8021Q=m -+CONFIG_VLAN_8021Q_GVRP=y -+CONFIG_ATALK=m -+CONFIG_6LOWPAN=m -+CONFIG_IEEE802154=m -+CONFIG_IEEE802154_6LOWPAN=m -+CONFIG_MAC802154=m -+CONFIG_NET_SCHED=y -+CONFIG_NET_SCH_CBQ=m -+CONFIG_NET_SCH_HTB=m -+CONFIG_NET_SCH_HFSC=m -+CONFIG_NET_SCH_PRIO=m -+CONFIG_NET_SCH_MULTIQ=m -+CONFIG_NET_SCH_RED=m -+CONFIG_NET_SCH_SFB=m -+CONFIG_NET_SCH_SFQ=m -+CONFIG_NET_SCH_TEQL=m -+CONFIG_NET_SCH_TBF=m -+CONFIG_NET_SCH_GRED=m -+CONFIG_NET_SCH_DSMARK=m -+CONFIG_NET_SCH_NETEM=m -+CONFIG_NET_SCH_DRR=m -+CONFIG_NET_SCH_MQPRIO=m -+CONFIG_NET_SCH_CHOKE=m -+CONFIG_NET_SCH_QFQ=m -+CONFIG_NET_SCH_CODEL=m -+CONFIG_NET_SCH_FQ_CODEL=m -+CONFIG_NET_SCH_INGRESS=m -+CONFIG_NET_SCH_PLUG=m -+CONFIG_NET_CLS_BASIC=m -+CONFIG_NET_CLS_TCINDEX=m -+CONFIG_NET_CLS_ROUTE4=m -+CONFIG_NET_CLS_FW=m -+CONFIG_NET_CLS_U32=m -+CONFIG_CLS_U32_MARK=y -+CONFIG_NET_CLS_RSVP=m -+CONFIG_NET_CLS_RSVP6=m -+CONFIG_NET_CLS_FLOW=m -+CONFIG_NET_CLS_CGROUP=m -+CONFIG_NET_EMATCH=y -+CONFIG_NET_EMATCH_CMP=m -+CONFIG_NET_EMATCH_NBYTE=m -+CONFIG_NET_EMATCH_U32=m -+CONFIG_NET_EMATCH_META=m -+CONFIG_NET_EMATCH_TEXT=m -+CONFIG_NET_EMATCH_IPSET=m -+CONFIG_NET_CLS_ACT=y -+CONFIG_NET_ACT_POLICE=m -+CONFIG_NET_ACT_GACT=m -+CONFIG_GACT_PROB=y -+CONFIG_NET_ACT_MIRRED=m -+CONFIG_NET_ACT_IPT=m -+CONFIG_NET_ACT_NAT=m -+CONFIG_NET_ACT_PEDIT=m -+CONFIG_NET_ACT_SIMP=m -+CONFIG_NET_ACT_SKBEDIT=m -+CONFIG_NET_ACT_CSUM=m -+CONFIG_BATMAN_ADV=m -+CONFIG_OPENVSWITCH=m -+CONFIG_NET_PKTGEN=m -+CONFIG_HAMRADIO=y -+CONFIG_AX25=m -+CONFIG_NETROM=m -+CONFIG_ROSE=m -+CONFIG_MKISS=m -+CONFIG_6PACK=m -+CONFIG_BPQETHER=m -+CONFIG_BAYCOM_SER_FDX=m -+CONFIG_BAYCOM_SER_HDX=m -+CONFIG_YAM=m -+CONFIG_CAN=m -+CONFIG_CAN_VCAN=m -+CONFIG_CAN_MCP251X=m -+CONFIG_IRDA=m -+CONFIG_IRLAN=m -+CONFIG_IRNET=m -+CONFIG_IRCOMM=m -+CONFIG_IRDA_ULTRA=y -+CONFIG_IRDA_CACHE_LAST_LSAP=y -+CONFIG_IRDA_FAST_RR=y -+CONFIG_IRTTY_SIR=m -+CONFIG_KINGSUN_DONGLE=m -+CONFIG_KSDAZZLE_DONGLE=m -+CONFIG_KS959_DONGLE=m -+CONFIG_USB_IRDA=m -+CONFIG_SIGMATEL_FIR=m -+CONFIG_MCS_FIR=m -+CONFIG_BT=m -+CONFIG_BT_RFCOMM=m -+CONFIG_BT_RFCOMM_TTY=y -+CONFIG_BT_BNEP=m -+CONFIG_BT_BNEP_MC_FILTER=y -+CONFIG_BT_BNEP_PROTO_FILTER=y -+CONFIG_BT_HIDP=m -+CONFIG_BT_6LOWPAN=m -+CONFIG_BT_HCIBTUSB=m -+CONFIG_BT_HCIUART=m -+CONFIG_BT_HCIUART_3WIRE=y -+CONFIG_BT_HCIUART_BCM=y -+CONFIG_BT_HCIBCM203X=m -+CONFIG_BT_HCIBPA10X=m -+CONFIG_BT_HCIBFUSB=m -+CONFIG_BT_HCIVHCI=m -+CONFIG_BT_MRVL=m -+CONFIG_BT_MRVL_SDIO=m -+CONFIG_BT_ATH3K=m -+CONFIG_BT_WILINK=m -+CONFIG_MAC80211=m -+CONFIG_MAC80211_MESH=y -+CONFIG_WIMAX=m -+CONFIG_RFKILL=m -+CONFIG_RFKILL_INPUT=y -+CONFIG_NET_9P=m -+CONFIG_NFC=m -+CONFIG_DEVTMPFS=y -+CONFIG_DEVTMPFS_MOUNT=y -+CONFIG_DMA_CMA=y -+CONFIG_CMA_SIZE_MBYTES=5 -+CONFIG_MTD=m -+CONFIG_MTD_BLOCK=m -+CONFIG_MTD_NAND=m -+CONFIG_MTD_UBI=m -+CONFIG_OF_CONFIGFS=y -+CONFIG_ZRAM=m -+CONFIG_BLK_DEV_LOOP=y -+CONFIG_BLK_DEV_CRYPTOLOOP=m -+CONFIG_BLK_DEV_DRBD=m -+CONFIG_BLK_DEV_NBD=m -+CONFIG_BLK_DEV_RAM=y -+CONFIG_CDROM_PKTCDVD=m -+CONFIG_ATA_OVER_ETH=m -+CONFIG_EEPROM_AT24=m -+CONFIG_TI_ST=m -+CONFIG_SCSI=y -+# CONFIG_SCSI_PROC_FS is not set -+CONFIG_BLK_DEV_SD=y -+CONFIG_CHR_DEV_ST=m -+CONFIG_CHR_DEV_OSST=m -+CONFIG_BLK_DEV_SR=m -+CONFIG_CHR_DEV_SG=m -+CONFIG_SCSI_ISCSI_ATTRS=y -+CONFIG_ISCSI_TCP=m -+CONFIG_ISCSI_BOOT_SYSFS=m -+CONFIG_MD=y -+CONFIG_MD_LINEAR=m -+CONFIG_MD_RAID0=m -+CONFIG_BLK_DEV_DM=m -+CONFIG_DM_CRYPT=m -+CONFIG_DM_SNAPSHOT=m -+CONFIG_DM_THIN_PROVISIONING=m -+CONFIG_DM_MIRROR=m -+CONFIG_DM_LOG_USERSPACE=m -+CONFIG_DM_RAID=m -+CONFIG_DM_ZERO=m -+CONFIG_DM_DELAY=m -+CONFIG_NETDEVICES=y -+CONFIG_BONDING=m -+CONFIG_DUMMY=m -+CONFIG_IFB=m -+CONFIG_MACVLAN=m -+CONFIG_IPVLAN=m -+CONFIG_VXLAN=m -+CONFIG_NETCONSOLE=m -+CONFIG_TUN=m -+CONFIG_VETH=m -+CONFIG_ENC28J60=m -+CONFIG_QCA7000=m -+CONFIG_MDIO_BITBANG=m -+CONFIG_PPP=m -+CONFIG_PPP_BSDCOMP=m -+CONFIG_PPP_DEFLATE=m -+CONFIG_PPP_FILTER=y -+CONFIG_PPP_MPPE=m -+CONFIG_PPP_MULTILINK=y -+CONFIG_PPPOATM=m -+CONFIG_PPPOE=m -+CONFIG_PPPOL2TP=m -+CONFIG_PPP_ASYNC=m -+CONFIG_PPP_SYNC_TTY=m -+CONFIG_SLIP=m -+CONFIG_SLIP_COMPRESSED=y -+CONFIG_SLIP_SMART=y -+CONFIG_USB_CATC=m -+CONFIG_USB_KAWETH=m -+CONFIG_USB_PEGASUS=m -+CONFIG_USB_RTL8150=m -+CONFIG_USB_RTL8152=m -+CONFIG_USB_USBNET=y -+CONFIG_USB_NET_AX8817X=m -+CONFIG_USB_NET_AX88179_178A=m -+CONFIG_USB_NET_CDCETHER=m -+CONFIG_USB_NET_CDC_EEM=m -+CONFIG_USB_NET_CDC_NCM=m -+CONFIG_USB_NET_HUAWEI_CDC_NCM=m -+CONFIG_USB_NET_CDC_MBIM=m -+CONFIG_USB_NET_DM9601=m -+CONFIG_USB_NET_SR9700=m -+CONFIG_USB_NET_SR9800=m -+CONFIG_USB_NET_SMSC75XX=m -+CONFIG_USB_NET_SMSC95XX=y -+CONFIG_USB_NET_GL620A=m -+CONFIG_USB_NET_NET1080=m -+CONFIG_USB_NET_PLUSB=m -+CONFIG_USB_NET_MCS7830=m -+CONFIG_USB_NET_CDC_SUBSET=m -+CONFIG_USB_ALI_M5632=y -+CONFIG_USB_AN2720=y -+CONFIG_USB_EPSON2888=y -+CONFIG_USB_KC2190=y -+CONFIG_USB_NET_ZAURUS=m -+CONFIG_USB_NET_CX82310_ETH=m -+CONFIG_USB_NET_KALMIA=m -+CONFIG_USB_NET_QMI_WWAN=m -+CONFIG_USB_HSO=m -+CONFIG_USB_NET_INT51X1=m -+CONFIG_USB_IPHETH=m -+CONFIG_USB_SIERRA_NET=m -+CONFIG_USB_VL600=m -+CONFIG_ATH9K=m -+CONFIG_ATH9K_HTC=m -+CONFIG_CARL9170=m -+CONFIG_ATH6KL=m -+CONFIG_ATH6KL_USB=m -+CONFIG_AR5523=m -+CONFIG_AT76C50X_USB=m -+CONFIG_B43=m -+# CONFIG_B43_PHY_N is not set -+CONFIG_B43LEGACY=m -+CONFIG_BRCMFMAC=m -+CONFIG_BRCMFMAC_USB=y -+CONFIG_HOSTAP=m -+CONFIG_P54_COMMON=m -+CONFIG_P54_USB=m -+CONFIG_LIBERTAS=m -+CONFIG_LIBERTAS_USB=m -+CONFIG_LIBERTAS_SDIO=m -+CONFIG_LIBERTAS_THINFIRM=m -+CONFIG_LIBERTAS_THINFIRM_USB=m -+CONFIG_MWIFIEX=m -+CONFIG_MWIFIEX_SDIO=m -+CONFIG_MT7601U=m -+CONFIG_RT2X00=m -+CONFIG_RT2500USB=m -+CONFIG_RT73USB=m -+CONFIG_RT2800USB=m -+CONFIG_RT2800USB_RT3573=y -+CONFIG_RT2800USB_RT53XX=y -+CONFIG_RT2800USB_RT55XX=y -+CONFIG_RT2800USB_UNKNOWN=y -+CONFIG_RTL8187=m -+CONFIG_RTL8192CU=n -+CONFIG_USB_ZD1201=m -+CONFIG_ZD1211RW=m -+CONFIG_MAC80211_HWSIM=m -+CONFIG_USB_NET_RNDIS_WLAN=m -+CONFIG_WIMAX_I2400M_USB=m -+CONFIG_IEEE802154_AT86RF230=m -+CONFIG_IEEE802154_MRF24J40=m -+CONFIG_IEEE802154_CC2520=m -+CONFIG_INPUT_POLLDEV=m -+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -+CONFIG_INPUT_JOYDEV=m -+CONFIG_INPUT_EVDEV=m -+# CONFIG_KEYBOARD_ATKBD is not set -+CONFIG_KEYBOARD_GPIO=m -+# CONFIG_INPUT_MOUSE is not set -+CONFIG_INPUT_JOYSTICK=y -+CONFIG_JOYSTICK_IFORCE=m -+CONFIG_JOYSTICK_IFORCE_USB=y -+CONFIG_JOYSTICK_XPAD=m -+CONFIG_JOYSTICK_XPAD_FF=y -+CONFIG_JOYSTICK_XPAD_LEDS=y -+CONFIG_JOYSTICK_RPISENSE=m -+CONFIG_INPUT_TOUCHSCREEN=y -+CONFIG_TOUCHSCREEN_ADS7846=m -+CONFIG_TOUCHSCREEN_EGALAX=m -+CONFIG_TOUCHSCREEN_FT6236=m -+CONFIG_TOUCHSCREEN_RPI_FT5406=m -+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m -+CONFIG_TOUCHSCREEN_STMPE=m -+CONFIG_INPUT_MISC=y -+CONFIG_INPUT_AD714X=m -+CONFIG_INPUT_ATI_REMOTE2=m -+CONFIG_INPUT_KEYSPAN_REMOTE=m -+CONFIG_INPUT_POWERMATE=m -+CONFIG_INPUT_YEALINK=m -+CONFIG_INPUT_CM109=m -+CONFIG_INPUT_UINPUT=m -+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -+CONFIG_INPUT_ADXL34X=m -+CONFIG_INPUT_CMA3000=m -+CONFIG_SERIO=m -+CONFIG_SERIO_RAW=m -+CONFIG_GAMEPORT=m -+CONFIG_GAMEPORT_NS558=m -+CONFIG_GAMEPORT_L4=m -+CONFIG_BRCM_CHAR_DRIVERS=n -+CONFIG_BCM_VC_CMA=n -+CONFIG_BCM_VCIO=n -+CONFIG_BCM_VC_SM=n -+# CONFIG_LEGACY_PTYS is not set -+# CONFIG_DEVKMEM is not set -+CONFIG_SERIAL_8250=y -+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -+CONFIG_SERIAL_8250_CONSOLE=y -+# CONFIG_SERIAL_8250_DMA is not set -+CONFIG_SERIAL_8250_NR_UARTS=1 -+CONFIG_SERIAL_8250_RUNTIME_UARTS=0 -+CONFIG_SERIAL_OF_PLATFORM=y -+CONFIG_SERIAL_AMBA_PL011=y -+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -+CONFIG_SERIAL_SC16IS7XX=m -+CONFIG_SERIAL_SC16IS7XX_SPI=y -+CONFIG_TTY_PRINTK=y -+CONFIG_HW_RANDOM=y -+CONFIG_RAW_DRIVER=y -+CONFIG_I2C=y -+CONFIG_I2C_CHARDEV=m -+CONFIG_I2C_MUX_PCA954x=m -+CONFIG_I2C_BCM2708=m -+CONFIG_I2C_GPIO=m -+CONFIG_SPI=y -+CONFIG_SPI_BCM2835=m -+CONFIG_SPI_BCM2835AUX=m -+CONFIG_SPI_SPIDEV=y -+CONFIG_PPS=m -+CONFIG_PPS_CLIENT_LDISC=m -+CONFIG_PPS_CLIENT_GPIO=m -+CONFIG_GPIO_SYSFS=y -+CONFIG_GPIO_BCM_VIRT=y -+CONFIG_GPIO_ARIZONA=m -+CONFIG_GPIO_STMPE=y -+CONFIG_GPIO_MCP23S08=m -+CONFIG_W1=m -+CONFIG_W1_MASTER_DS2490=m -+CONFIG_W1_MASTER_DS2482=m -+CONFIG_W1_MASTER_DS1WM=m -+CONFIG_W1_MASTER_GPIO=m -+CONFIG_W1_SLAVE_THERM=m -+CONFIG_W1_SLAVE_SMEM=m -+CONFIG_W1_SLAVE_DS2408=m -+CONFIG_W1_SLAVE_DS2413=m -+CONFIG_W1_SLAVE_DS2406=m -+CONFIG_W1_SLAVE_DS2423=m -+CONFIG_W1_SLAVE_DS2431=m -+CONFIG_W1_SLAVE_DS2433=m -+CONFIG_W1_SLAVE_DS2760=m -+CONFIG_W1_SLAVE_DS2780=m -+CONFIG_W1_SLAVE_DS2781=m -+CONFIG_W1_SLAVE_DS28E04=m -+CONFIG_W1_SLAVE_BQ27000=m -+CONFIG_BATTERY_DS2760=m -+CONFIG_POWER_RESET=y -+CONFIG_POWER_RESET_GPIO=y -+CONFIG_HWMON=m -+CONFIG_SENSORS_LM75=m -+CONFIG_SENSORS_SHT21=m -+CONFIG_SENSORS_SHTC1=m -+CONFIG_THERMAL=y -+CONFIG_THERMAL_BCM2835=y -+CONFIG_WATCHDOG=y -+CONFIG_BCM2835_WDT=y -+CONFIG_UCB1400_CORE=m -+CONFIG_MFD_STMPE=y -+CONFIG_STMPE_SPI=y -+CONFIG_MFD_ARIZONA_I2C=m -+CONFIG_MFD_ARIZONA_SPI=m -+CONFIG_MFD_WM5102=y -+CONFIG_MEDIA_SUPPORT=m -+CONFIG_MEDIA_CAMERA_SUPPORT=y -+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -+CONFIG_MEDIA_RADIO_SUPPORT=y -+CONFIG_MEDIA_RC_SUPPORT=y -+CONFIG_MEDIA_CONTROLLER=y -+CONFIG_LIRC=m -+CONFIG_RC_DEVICES=y -+CONFIG_RC_ATI_REMOTE=m -+CONFIG_IR_IMON=m -+CONFIG_IR_MCEUSB=m -+CONFIG_IR_REDRAT3=m -+CONFIG_IR_STREAMZAP=m -+CONFIG_IR_IGUANA=m -+CONFIG_IR_TTUSBIR=m -+CONFIG_RC_LOOPBACK=m -+CONFIG_IR_GPIO_CIR=m -+CONFIG_MEDIA_USB_SUPPORT=y -+CONFIG_USB_VIDEO_CLASS=m -+CONFIG_USB_M5602=m -+CONFIG_USB_STV06XX=m -+CONFIG_USB_GL860=m -+CONFIG_USB_GSPCA_BENQ=m -+CONFIG_USB_GSPCA_CONEX=m -+CONFIG_USB_GSPCA_CPIA1=m -+CONFIG_USB_GSPCA_DTCS033=m -+CONFIG_USB_GSPCA_ETOMS=m -+CONFIG_USB_GSPCA_FINEPIX=m -+CONFIG_USB_GSPCA_JEILINJ=m -+CONFIG_USB_GSPCA_JL2005BCD=m -+CONFIG_USB_GSPCA_KINECT=m -+CONFIG_USB_GSPCA_KONICA=m -+CONFIG_USB_GSPCA_MARS=m -+CONFIG_USB_GSPCA_MR97310A=m -+CONFIG_USB_GSPCA_NW80X=m -+CONFIG_USB_GSPCA_OV519=m -+CONFIG_USB_GSPCA_OV534=m -+CONFIG_USB_GSPCA_OV534_9=m -+CONFIG_USB_GSPCA_PAC207=m -+CONFIG_USB_GSPCA_PAC7302=m -+CONFIG_USB_GSPCA_PAC7311=m -+CONFIG_USB_GSPCA_SE401=m -+CONFIG_USB_GSPCA_SN9C2028=m -+CONFIG_USB_GSPCA_SN9C20X=m -+CONFIG_USB_GSPCA_SONIXB=m -+CONFIG_USB_GSPCA_SONIXJ=m -+CONFIG_USB_GSPCA_SPCA500=m -+CONFIG_USB_GSPCA_SPCA501=m -+CONFIG_USB_GSPCA_SPCA505=m -+CONFIG_USB_GSPCA_SPCA506=m -+CONFIG_USB_GSPCA_SPCA508=m -+CONFIG_USB_GSPCA_SPCA561=m -+CONFIG_USB_GSPCA_SPCA1528=m -+CONFIG_USB_GSPCA_SQ905=m -+CONFIG_USB_GSPCA_SQ905C=m -+CONFIG_USB_GSPCA_SQ930X=m -+CONFIG_USB_GSPCA_STK014=m -+CONFIG_USB_GSPCA_STK1135=m -+CONFIG_USB_GSPCA_STV0680=m -+CONFIG_USB_GSPCA_SUNPLUS=m -+CONFIG_USB_GSPCA_T613=m -+CONFIG_USB_GSPCA_TOPRO=m -+CONFIG_USB_GSPCA_TV8532=m -+CONFIG_USB_GSPCA_VC032X=m -+CONFIG_USB_GSPCA_VICAM=m -+CONFIG_USB_GSPCA_XIRLINK_CIT=m -+CONFIG_USB_GSPCA_ZC3XX=m -+CONFIG_USB_PWC=m -+CONFIG_VIDEO_CPIA2=m -+CONFIG_USB_ZR364XX=m -+CONFIG_USB_STKWEBCAM=m -+CONFIG_USB_S2255=m -+CONFIG_VIDEO_USBTV=m -+CONFIG_VIDEO_PVRUSB2=m -+CONFIG_VIDEO_HDPVR=m -+CONFIG_VIDEO_USBVISION=m -+CONFIG_VIDEO_STK1160_COMMON=m -+CONFIG_VIDEO_STK1160_AC97=y -+CONFIG_VIDEO_GO7007=m -+CONFIG_VIDEO_GO7007_USB=m -+CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m -+CONFIG_VIDEO_AU0828=m -+CONFIG_VIDEO_AU0828_RC=y -+CONFIG_VIDEO_CX231XX=m -+CONFIG_VIDEO_CX231XX_ALSA=m -+CONFIG_VIDEO_CX231XX_DVB=m -+CONFIG_VIDEO_TM6000=m -+CONFIG_VIDEO_TM6000_ALSA=m -+CONFIG_VIDEO_TM6000_DVB=m -+CONFIG_DVB_USB=m -+CONFIG_DVB_USB_A800=m -+CONFIG_DVB_USB_DIBUSB_MB=m -+CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y -+CONFIG_DVB_USB_DIBUSB_MC=m -+CONFIG_DVB_USB_DIB0700=m -+CONFIG_DVB_USB_UMT_010=m -+CONFIG_DVB_USB_CXUSB=m -+CONFIG_DVB_USB_M920X=m -+CONFIG_DVB_USB_DIGITV=m -+CONFIG_DVB_USB_VP7045=m -+CONFIG_DVB_USB_VP702X=m -+CONFIG_DVB_USB_GP8PSK=m -+CONFIG_DVB_USB_NOVA_T_USB2=m -+CONFIG_DVB_USB_TTUSB2=m -+CONFIG_DVB_USB_DTT200U=m -+CONFIG_DVB_USB_OPERA1=m -+CONFIG_DVB_USB_AF9005=m -+CONFIG_DVB_USB_AF9005_REMOTE=m -+CONFIG_DVB_USB_PCTV452E=m -+CONFIG_DVB_USB_DW2102=m -+CONFIG_DVB_USB_CINERGY_T2=m -+CONFIG_DVB_USB_DTV5100=m -+CONFIG_DVB_USB_FRIIO=m -+CONFIG_DVB_USB_AZ6027=m -+CONFIG_DVB_USB_TECHNISAT_USB2=m -+CONFIG_DVB_USB_V2=m -+CONFIG_DVB_USB_AF9015=m -+CONFIG_DVB_USB_AF9035=m -+CONFIG_DVB_USB_ANYSEE=m -+CONFIG_DVB_USB_AU6610=m -+CONFIG_DVB_USB_AZ6007=m -+CONFIG_DVB_USB_CE6230=m -+CONFIG_DVB_USB_EC168=m -+CONFIG_DVB_USB_GL861=m -+CONFIG_DVB_USB_LME2510=m -+CONFIG_DVB_USB_MXL111SF=m -+CONFIG_DVB_USB_RTL28XXU=m -+CONFIG_DVB_USB_DVBSKY=m -+CONFIG_SMS_USB_DRV=m -+CONFIG_DVB_B2C2_FLEXCOP_USB=m -+CONFIG_DVB_AS102=m -+CONFIG_VIDEO_EM28XX=m -+CONFIG_VIDEO_EM28XX_V4L2=m -+CONFIG_VIDEO_EM28XX_ALSA=m -+CONFIG_VIDEO_EM28XX_DVB=m -+CONFIG_V4L_PLATFORM_DRIVERS=y -+CONFIG_VIDEO_BCM2835=n -+CONFIG_VIDEO_BCM2835_MMAL=n -+CONFIG_RADIO_SI470X=y -+CONFIG_USB_SI470X=m -+CONFIG_I2C_SI470X=m -+CONFIG_RADIO_SI4713=m -+CONFIG_I2C_SI4713=m -+CONFIG_USB_MR800=m -+CONFIG_USB_DSBR=m -+CONFIG_RADIO_SHARK=m -+CONFIG_RADIO_SHARK2=m -+CONFIG_USB_KEENE=m -+CONFIG_USB_MA901=m -+CONFIG_RADIO_TEA5764=m -+CONFIG_RADIO_SAA7706H=m -+CONFIG_RADIO_TEF6862=m -+CONFIG_RADIO_WL1273=m -+CONFIG_RADIO_WL128X=m -+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set -+CONFIG_VIDEO_UDA1342=m -+CONFIG_VIDEO_SONY_BTF_MPX=m -+CONFIG_VIDEO_TVP5150=m -+CONFIG_VIDEO_TW2804=m -+CONFIG_VIDEO_TW9903=m -+CONFIG_VIDEO_TW9906=m -+CONFIG_VIDEO_OV7640=m -+CONFIG_VIDEO_MT9V011=m -+CONFIG_DRM=m -+CONFIG_DRM_LOAD_EDID_FIRMWARE=y -+CONFIG_DRM_UDL=m -+CONFIG_DRM_VC4=m -+CONFIG_FB=y -+CONFIG_FB_BCM2708=y -+CONFIG_FB_UDL=m -+CONFIG_FB_SSD1307=m -+CONFIG_FB_RPISENSE=m -+# CONFIG_BACKLIGHT_GENERIC is not set -+CONFIG_BACKLIGHT_RPI=m -+CONFIG_BACKLIGHT_GPIO=m -+CONFIG_FRAMEBUFFER_CONSOLE=y -+CONFIG_LOGO=y -+# CONFIG_LOGO_LINUX_MONO is not set -+# CONFIG_LOGO_LINUX_VGA16 is not set -+CONFIG_SOUND=y -+CONFIG_SND=m -+CONFIG_SND_SEQUENCER=m -+CONFIG_SND_SEQ_DUMMY=m -+CONFIG_SND_MIXER_OSS=m -+CONFIG_SND_PCM_OSS=m -+CONFIG_SND_SEQUENCER_OSS=y -+CONFIG_SND_HRTIMER=m -+CONFIG_SND_DUMMY=m -+CONFIG_SND_ALOOP=m -+CONFIG_SND_VIRMIDI=m -+CONFIG_SND_MTPAV=m -+CONFIG_SND_SERIAL_U16550=m -+CONFIG_SND_MPU401=m -+CONFIG_SND_ARM=n -+CONFIG_SND_BCM2835=n -+CONFIG_SND_USB_AUDIO=m -+CONFIG_SND_USB_UA101=m -+CONFIG_SND_USB_CAIAQ=m -+CONFIG_SND_USB_CAIAQ_INPUT=y -+CONFIG_SND_USB_6FIRE=m -+CONFIG_SND_SOC=m -+CONFIG_SND_BCM2835_SOC_I2S=m -+CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m -+CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m -+CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m -+CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m -+CONFIG_SND_BCM2708_SOC_RPI_DAC=m -+CONFIG_SND_BCM2708_SOC_RPI_PROTO=m -+CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m -+CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI=m -+CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m -+CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI=m -+CONFIG_SND_BCM2708_SOC_RASPIDAC3=m -+CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m -+CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m -+CONFIG_SND_DIGIDAC1_SOUNDCARD=m -+CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m -+CONFIG_SND_SOC_ADAU1701=m -+CONFIG_SND_SOC_WM8804_I2C=m -+CONFIG_SND_SIMPLE_CARD=m -+CONFIG_SOUND_PRIME=m -+CONFIG_HIDRAW=y -+CONFIG_UHID=m -+CONFIG_HID_A4TECH=m -+CONFIG_HID_ACRUX=m -+CONFIG_HID_APPLE=m -+CONFIG_HID_BELKIN=m -+CONFIG_HID_BETOP_FF=m -+CONFIG_HID_CHERRY=m -+CONFIG_HID_CHICONY=m -+CONFIG_HID_CYPRESS=m -+CONFIG_HID_DRAGONRISE=m -+CONFIG_HID_EMS_FF=m -+CONFIG_HID_ELECOM=m -+CONFIG_HID_ELO=m -+CONFIG_HID_EZKEY=m -+CONFIG_HID_GEMBIRD=m -+CONFIG_HID_HOLTEK=m -+CONFIG_HID_KEYTOUCH=m -+CONFIG_HID_KYE=m -+CONFIG_HID_UCLOGIC=m -+CONFIG_HID_WALTOP=m -+CONFIG_HID_GYRATION=m -+CONFIG_HID_TWINHAN=m -+CONFIG_HID_KENSINGTON=m -+CONFIG_HID_LCPOWER=m -+CONFIG_HID_LOGITECH=m -+CONFIG_HID_LOGITECH_DJ=m -+CONFIG_LOGITECH_FF=y -+CONFIG_LOGIRUMBLEPAD2_FF=y -+CONFIG_LOGIG940_FF=y -+CONFIG_HID_MAGICMOUSE=m -+CONFIG_HID_MICROSOFT=m -+CONFIG_HID_MONTEREY=m -+CONFIG_HID_MULTITOUCH=m -+CONFIG_HID_NTRIG=m -+CONFIG_HID_ORTEK=m -+CONFIG_HID_PANTHERLORD=m -+CONFIG_HID_PETALYNX=m -+CONFIG_HID_PICOLCD=m -+CONFIG_HID_ROCCAT=m -+CONFIG_HID_SAMSUNG=m -+CONFIG_HID_SONY=m -+CONFIG_HID_SPEEDLINK=m -+CONFIG_HID_SUNPLUS=m -+CONFIG_HID_GREENASIA=m -+CONFIG_HID_SMARTJOYPLUS=m -+CONFIG_HID_TOPSEED=m -+CONFIG_HID_THINGM=m -+CONFIG_HID_THRUSTMASTER=m -+CONFIG_HID_WACOM=m -+CONFIG_HID_WIIMOTE=m -+CONFIG_HID_XINMO=m -+CONFIG_HID_ZEROPLUS=m -+CONFIG_HID_ZYDACRON=m -+CONFIG_HID_PID=y -+CONFIG_USB_HIDDEV=y -+CONFIG_USB=y -+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -+CONFIG_USB_MON=m -+CONFIG_USB_DWCOTG=n -+CONFIG_USB_DWC2=y -+CONFIG_USB_PRINTER=m -+CONFIG_USB_STORAGE=y -+CONFIG_USB_STORAGE_REALTEK=m -+CONFIG_USB_STORAGE_DATAFAB=m -+CONFIG_USB_STORAGE_FREECOM=m -+CONFIG_USB_STORAGE_ISD200=m -+CONFIG_USB_STORAGE_USBAT=m -+CONFIG_USB_STORAGE_SDDR09=m -+CONFIG_USB_STORAGE_SDDR55=m -+CONFIG_USB_STORAGE_JUMPSHOT=m -+CONFIG_USB_STORAGE_ALAUDA=m -+CONFIG_USB_STORAGE_ONETOUCH=m -+CONFIG_USB_STORAGE_KARMA=m -+CONFIG_USB_STORAGE_CYPRESS_ATACB=m -+CONFIG_USB_STORAGE_ENE_UB6250=m -+CONFIG_USB_MDC800=m -+CONFIG_USB_MICROTEK=m -+CONFIG_USBIP_CORE=m -+CONFIG_USBIP_VHCI_HCD=m -+CONFIG_USBIP_HOST=m -+CONFIG_USB_SERIAL=m -+CONFIG_USB_SERIAL_GENERIC=y -+CONFIG_USB_SERIAL_AIRCABLE=m -+CONFIG_USB_SERIAL_ARK3116=m -+CONFIG_USB_SERIAL_BELKIN=m -+CONFIG_USB_SERIAL_CH341=m -+CONFIG_USB_SERIAL_WHITEHEAT=m -+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -+CONFIG_USB_SERIAL_CP210X=m -+CONFIG_USB_SERIAL_CYPRESS_M8=m -+CONFIG_USB_SERIAL_EMPEG=m -+CONFIG_USB_SERIAL_FTDI_SIO=m -+CONFIG_USB_SERIAL_VISOR=m -+CONFIG_USB_SERIAL_IPAQ=m -+CONFIG_USB_SERIAL_IR=m -+CONFIG_USB_SERIAL_EDGEPORT=m -+CONFIG_USB_SERIAL_EDGEPORT_TI=m -+CONFIG_USB_SERIAL_F81232=m -+CONFIG_USB_SERIAL_GARMIN=m -+CONFIG_USB_SERIAL_IPW=m -+CONFIG_USB_SERIAL_IUU=m -+CONFIG_USB_SERIAL_KEYSPAN_PDA=m -+CONFIG_USB_SERIAL_KEYSPAN=m -+CONFIG_USB_SERIAL_KLSI=m -+CONFIG_USB_SERIAL_KOBIL_SCT=m -+CONFIG_USB_SERIAL_MCT_U232=m -+CONFIG_USB_SERIAL_METRO=m -+CONFIG_USB_SERIAL_MOS7720=m -+CONFIG_USB_SERIAL_MOS7840=m -+CONFIG_USB_SERIAL_NAVMAN=m -+CONFIG_USB_SERIAL_PL2303=m -+CONFIG_USB_SERIAL_OTI6858=m -+CONFIG_USB_SERIAL_QCAUX=m -+CONFIG_USB_SERIAL_QUALCOMM=m -+CONFIG_USB_SERIAL_SPCP8X5=m -+CONFIG_USB_SERIAL_SAFE=m -+CONFIG_USB_SERIAL_SIERRAWIRELESS=m -+CONFIG_USB_SERIAL_SYMBOL=m -+CONFIG_USB_SERIAL_TI=m -+CONFIG_USB_SERIAL_CYBERJACK=m -+CONFIG_USB_SERIAL_XIRCOM=m -+CONFIG_USB_SERIAL_OPTION=m -+CONFIG_USB_SERIAL_OMNINET=m -+CONFIG_USB_SERIAL_OPTICON=m -+CONFIG_USB_SERIAL_XSENS_MT=m -+CONFIG_USB_SERIAL_WISHBONE=m -+CONFIG_USB_SERIAL_SSU100=m -+CONFIG_USB_SERIAL_QT2=m -+CONFIG_USB_SERIAL_DEBUG=m -+CONFIG_USB_EMI62=m -+CONFIG_USB_EMI26=m -+CONFIG_USB_ADUTUX=m -+CONFIG_USB_SEVSEG=m -+CONFIG_USB_RIO500=m -+CONFIG_USB_LEGOTOWER=m -+CONFIG_USB_LCD=m -+CONFIG_USB_CYPRESS_CY7C63=m -+CONFIG_USB_CYTHERM=m -+CONFIG_USB_IDMOUSE=m -+CONFIG_USB_FTDI_ELAN=m -+CONFIG_USB_APPLEDISPLAY=m -+CONFIG_USB_LD=m -+CONFIG_USB_TRANCEVIBRATOR=m -+CONFIG_USB_IOWARRIOR=m -+CONFIG_USB_TEST=m -+CONFIG_USB_ISIGHTFW=m -+CONFIG_USB_YUREX=m -+CONFIG_USB_ATM=m -+CONFIG_USB_SPEEDTOUCH=m -+CONFIG_USB_CXACRU=m -+CONFIG_USB_UEAGLEATM=m -+CONFIG_USB_XUSBATM=m -+CONFIG_MMC=y -+CONFIG_MMC_BLOCK_MINORS=32 -+CONFIG_MMC_BCM2835=y -+CONFIG_MMC_BCM2835_DMA=y -+CONFIG_MMC_BCM2835_SDHOST=y -+CONFIG_MMC_SDHCI=y -+CONFIG_MMC_SDHCI_PLTFM=y -+CONFIG_MMC_SPI=m -+CONFIG_LEDS_CLASS=y -+CONFIG_LEDS_GPIO=y -+CONFIG_LEDS_TRIGGER_TIMER=y -+CONFIG_LEDS_TRIGGER_ONESHOT=y -+CONFIG_LEDS_TRIGGER_HEARTBEAT=y -+CONFIG_LEDS_TRIGGER_BACKLIGHT=y -+CONFIG_LEDS_TRIGGER_CPU=y -+CONFIG_LEDS_TRIGGER_GPIO=y -+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -+CONFIG_LEDS_TRIGGER_TRANSIENT=m -+CONFIG_LEDS_TRIGGER_CAMERA=m -+CONFIG_LEDS_TRIGGER_INPUT=y -+CONFIG_LEDS_TRIGGER_PANIC=y -+CONFIG_RTC_CLASS=y -+# CONFIG_RTC_HCTOSYS is not set -+CONFIG_RTC_DRV_DS1307=m -+CONFIG_RTC_DRV_DS1374=m -+CONFIG_RTC_DRV_DS1672=m -+CONFIG_RTC_DRV_MAX6900=m -+CONFIG_RTC_DRV_RS5C372=m -+CONFIG_RTC_DRV_ISL1208=m -+CONFIG_RTC_DRV_ISL12022=m -+CONFIG_RTC_DRV_ISL12057=m -+CONFIG_RTC_DRV_X1205=m -+CONFIG_RTC_DRV_PCF8523=m -+CONFIG_RTC_DRV_PCF8563=m -+CONFIG_RTC_DRV_PCF8583=m -+CONFIG_RTC_DRV_M41T80=m -+CONFIG_RTC_DRV_BQ32K=m -+CONFIG_RTC_DRV_S35390A=m -+CONFIG_RTC_DRV_FM3130=m -+CONFIG_RTC_DRV_RX8581=m -+CONFIG_RTC_DRV_RX8025=m -+CONFIG_RTC_DRV_EM3027=m -+CONFIG_RTC_DRV_M41T93=m -+CONFIG_RTC_DRV_M41T94=m -+CONFIG_RTC_DRV_DS1302=m -+CONFIG_RTC_DRV_DS1305=m -+CONFIG_RTC_DRV_DS1390=m -+CONFIG_RTC_DRV_R9701=m -+CONFIG_RTC_DRV_RX4581=m -+CONFIG_RTC_DRV_RS5C348=m -+CONFIG_RTC_DRV_MAX6902=m -+CONFIG_RTC_DRV_PCF2123=m -+CONFIG_RTC_DRV_DS3232=m -+CONFIG_RTC_DRV_PCF2127=m -+CONFIG_RTC_DRV_RV3029C2=m -+CONFIG_DMADEVICES=y -+CONFIG_DMA_BCM2835=y -+CONFIG_DMA_BCM2708=y -+CONFIG_UIO=m -+CONFIG_UIO_PDRV_GENIRQ=m -+CONFIG_STAGING=y -+CONFIG_PRISM2_USB=m -+CONFIG_R8712U=m -+CONFIG_R8188EU=m -+CONFIG_R8723AU=m -+CONFIG_VT6656=m -+CONFIG_SPEAKUP=m -+CONFIG_SPEAKUP_SYNTH_SOFT=m -+CONFIG_STAGING_MEDIA=y -+CONFIG_LIRC_STAGING=y -+CONFIG_LIRC_IMON=m -+CONFIG_LIRC_RPI=m -+CONFIG_LIRC_SASEM=m -+CONFIG_LIRC_SERIAL=m -+CONFIG_FB_TFT=m -+CONFIG_FB_TFT_AGM1264K_FL=m -+CONFIG_FB_TFT_BD663474=m -+CONFIG_FB_TFT_HX8340BN=m -+CONFIG_FB_TFT_HX8347D=m -+CONFIG_FB_TFT_HX8353D=m -+CONFIG_FB_TFT_ILI9163=m -+CONFIG_FB_TFT_ILI9320=m -+CONFIG_FB_TFT_ILI9325=m -+CONFIG_FB_TFT_ILI9340=m -+CONFIG_FB_TFT_ILI9341=m -+CONFIG_FB_TFT_ILI9481=m -+CONFIG_FB_TFT_ILI9486=m -+CONFIG_FB_TFT_PCD8544=m -+CONFIG_FB_TFT_RA8875=m -+CONFIG_FB_TFT_S6D02A1=m -+CONFIG_FB_TFT_S6D1121=m -+CONFIG_FB_TFT_SSD1289=m -+CONFIG_FB_TFT_SSD1306=m -+CONFIG_FB_TFT_SSD1331=m -+CONFIG_FB_TFT_SSD1351=m -+CONFIG_FB_TFT_ST7735R=m -+CONFIG_FB_TFT_TINYLCD=m -+CONFIG_FB_TFT_TLS8204=m -+CONFIG_FB_TFT_UC1701=m -+CONFIG_FB_TFT_UPD161704=m -+CONFIG_FB_TFT_WATTEROTT=m -+CONFIG_FB_FLEX=m -+CONFIG_FB_TFT_FBTFT_DEVICE=m -+CONFIG_MAILBOX=y -+CONFIG_BCM2835_MBOX=y -+# CONFIG_IOMMU_SUPPORT is not set -+CONFIG_RASPBERRYPI_POWER=y -+CONFIG_EXTCON=m -+CONFIG_EXTCON_ARIZONA=m -+CONFIG_IIO=m -+CONFIG_IIO_BUFFER=y -+CONFIG_IIO_BUFFER_CB=m -+CONFIG_IIO_KFIFO_BUF=m -+CONFIG_MCP320X=m -+CONFIG_MCP3422=m -+CONFIG_DHT11=m -+CONFIG_PWM_BCM2835=m -+CONFIG_PWM_PCA9685=m -+CONFIG_RASPBERRYPI_FIRMWARE=y -+CONFIG_EXT4_FS=y -+CONFIG_EXT4_FS_POSIX_ACL=y -+CONFIG_EXT4_FS_SECURITY=y -+CONFIG_REISERFS_FS=m -+CONFIG_REISERFS_FS_XATTR=y -+CONFIG_REISERFS_FS_POSIX_ACL=y -+CONFIG_REISERFS_FS_SECURITY=y -+CONFIG_JFS_FS=m -+CONFIG_JFS_POSIX_ACL=y -+CONFIG_JFS_SECURITY=y -+CONFIG_JFS_STATISTICS=y -+CONFIG_XFS_FS=m -+CONFIG_XFS_QUOTA=y -+CONFIG_XFS_POSIX_ACL=y -+CONFIG_XFS_RT=y -+CONFIG_GFS2_FS=m -+CONFIG_OCFS2_FS=m -+CONFIG_BTRFS_FS=m -+CONFIG_BTRFS_FS_POSIX_ACL=y -+CONFIG_NILFS2_FS=m -+CONFIG_F2FS_FS=y -+CONFIG_FANOTIFY=y -+CONFIG_QFMT_V1=m -+CONFIG_QFMT_V2=m -+CONFIG_AUTOFS4_FS=y -+CONFIG_FUSE_FS=m -+CONFIG_CUSE=m -+CONFIG_OVERLAY_FS=m -+CONFIG_FSCACHE=y -+CONFIG_FSCACHE_STATS=y -+CONFIG_FSCACHE_HISTOGRAM=y -+CONFIG_CACHEFILES=y -+CONFIG_ISO9660_FS=m -+CONFIG_JOLIET=y -+CONFIG_ZISOFS=y -+CONFIG_UDF_FS=m -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_IOCHARSET="ascii" -+CONFIG_NTFS_FS=m -+CONFIG_NTFS_RW=y -+CONFIG_TMPFS=y -+CONFIG_TMPFS_POSIX_ACL=y -+CONFIG_ECRYPT_FS=m -+CONFIG_HFS_FS=m -+CONFIG_HFSPLUS_FS=m -+CONFIG_JFFS2_FS=m -+CONFIG_JFFS2_SUMMARY=y -+CONFIG_UBIFS_FS=m -+CONFIG_SQUASHFS=m -+CONFIG_SQUASHFS_XATTR=y -+CONFIG_SQUASHFS_LZO=y -+CONFIG_SQUASHFS_XZ=y -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3_ACL=y -+CONFIG_NFS_V4=y -+CONFIG_NFS_SWAP=y -+CONFIG_ROOT_NFS=y -+CONFIG_NFS_FSCACHE=y -+CONFIG_NFSD=m -+CONFIG_NFSD_V3_ACL=y -+CONFIG_NFSD_V4=y -+CONFIG_CIFS=m -+CONFIG_CIFS_WEAK_PW_HASH=y -+CONFIG_CIFS_UPCALL=y -+CONFIG_CIFS_XATTR=y -+CONFIG_CIFS_POSIX=y -+CONFIG_CIFS_ACL=y -+CONFIG_CIFS_DFS_UPCALL=y -+CONFIG_CIFS_SMB2=y -+CONFIG_CIFS_FSCACHE=y -+CONFIG_9P_FS=m -+CONFIG_9P_FS_POSIX_ACL=y -+CONFIG_NLS_DEFAULT="utf8" -+CONFIG_NLS_CODEPAGE_437=y -+CONFIG_NLS_CODEPAGE_737=m -+CONFIG_NLS_CODEPAGE_775=m -+CONFIG_NLS_CODEPAGE_850=m -+CONFIG_NLS_CODEPAGE_852=m -+CONFIG_NLS_CODEPAGE_855=m -+CONFIG_NLS_CODEPAGE_857=m -+CONFIG_NLS_CODEPAGE_860=m -+CONFIG_NLS_CODEPAGE_861=m -+CONFIG_NLS_CODEPAGE_862=m -+CONFIG_NLS_CODEPAGE_863=m -+CONFIG_NLS_CODEPAGE_864=m -+CONFIG_NLS_CODEPAGE_865=m -+CONFIG_NLS_CODEPAGE_866=m -+CONFIG_NLS_CODEPAGE_869=m -+CONFIG_NLS_CODEPAGE_936=m -+CONFIG_NLS_CODEPAGE_950=m -+CONFIG_NLS_CODEPAGE_932=m -+CONFIG_NLS_CODEPAGE_949=m -+CONFIG_NLS_CODEPAGE_874=m -+CONFIG_NLS_ISO8859_8=m -+CONFIG_NLS_CODEPAGE_1250=m -+CONFIG_NLS_CODEPAGE_1251=m -+CONFIG_NLS_ASCII=y -+CONFIG_NLS_ISO8859_1=m -+CONFIG_NLS_ISO8859_2=m -+CONFIG_NLS_ISO8859_3=m -+CONFIG_NLS_ISO8859_4=m -+CONFIG_NLS_ISO8859_5=m -+CONFIG_NLS_ISO8859_6=m -+CONFIG_NLS_ISO8859_7=m -+CONFIG_NLS_ISO8859_9=m -+CONFIG_NLS_ISO8859_13=m -+CONFIG_NLS_ISO8859_14=m -+CONFIG_NLS_ISO8859_15=m -+CONFIG_NLS_KOI8_R=m -+CONFIG_NLS_KOI8_U=m -+CONFIG_DLM=m -+CONFIG_PRINTK_TIME=y -+CONFIG_BOOT_PRINTK_DELAY=y -+CONFIG_DEBUG_MEMORY_INIT=y -+CONFIG_DETECT_HUNG_TASK=y -+CONFIG_TIMER_STATS=y -+CONFIG_IRQSOFF_TRACER=y -+CONFIG_SCHED_TRACER=y -+CONFIG_STACK_TRACER=y -+CONFIG_BLK_DEV_IO_TRACE=y -+# CONFIG_KPROBE_EVENT is not set -+CONFIG_FUNCTION_PROFILER=y -+CONFIG_KGDB=y -+CONFIG_KGDB_KDB=y -+CONFIG_KDB_KEYBOARD=y -+CONFIG_CRYPTO_USER=m -+CONFIG_CRYPTO_CBC=y -+CONFIG_CRYPTO_CTS=m -+CONFIG_CRYPTO_XTS=m -+CONFIG_CRYPTO_XCBC=m -+CONFIG_CRYPTO_TGR192=m -+CONFIG_CRYPTO_WP512=m -+CONFIG_CRYPTO_CAST5=m -+CONFIG_CRYPTO_DES=y -+CONFIG_CRYPTO_USER_API_SKCIPHER=m -+CONFIG_ARM64_CRYPTO=y -+CONFIG_CRC_ITU_T=y -+CONFIG_LIBCRC32C=y -+CONFIG_BCM2708_VCHIQ=n diff --git a/target/linux/brcm2708/patches-4.9/0095-vchiq_arm-Tweak-the-logging-output.patch b/target/linux/brcm2708/patches-4.9/0095-vchiq_arm-Tweak-the-logging-output.patch deleted file mode 100644 index ef3c97ddc39b..000000000000 --- a/target/linux/brcm2708/patches-4.9/0095-vchiq_arm-Tweak-the-logging-output.patch +++ /dev/null @@ -1,75 +0,0 @@ -From 60486e8778192830c0e5369d4f05954c1f7cc12c Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 7 Mar 2016 15:05:11 +0000 -Subject: [PATCH] vchiq_arm: Tweak the logging output - -Signed-off-by: Phil Elwell ---- - .../vc04_services/interface/vchiq_arm/vchiq_core.c | 31 +++++++++------------- - 1 file changed, 13 insertions(+), 18 deletions(-) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c -@@ -891,16 +891,14 @@ queue_message(VCHIQ_STATE_T *state, VCHI - error_count); - return VCHIQ_ERROR; - } -- if (i == 0) { -- if (SRVTRACE_ENABLED(service, -- VCHIQ_LOG_INFO)) -- vchiq_log_dump_mem("Sent", 0, -- header->data + pos, -- min(64u, -- elements[0].size)); -- } - } - -+ if (SRVTRACE_ENABLED(service, -+ VCHIQ_LOG_INFO)) -+ vchiq_log_dump_mem("Sent", 0, -+ header->data, -+ min(16, pos)); -+ - spin_lock("a_spinlock); - service_quota->message_use_count++; - -@@ -1039,16 +1037,13 @@ queue_message_sync(VCHIQ_STATE_T *state, - error_count); - return VCHIQ_ERROR; - } -- if (i == 0) { -- if (vchiq_sync_log_level >= -- VCHIQ_LOG_TRACE) -- vchiq_log_dump_mem("Sent Sync", -- 0, header->data + pos, -- min(64u, -- elements[0].size)); -- } - } - -+ if (vchiq_sync_log_level >= VCHIQ_LOG_TRACE) -+ vchiq_log_dump_mem("Sent Sync", -+ 0, header->data, -+ min(16, pos)); -+ - VCHIQ_SERVICE_STATS_INC(service, ctrl_tx_count); - VCHIQ_SERVICE_STATS_ADD(service, ctrl_tx_bytes, size); - } else { -@@ -1720,7 +1715,7 @@ parse_rx_slots(VCHIQ_STATE_T *state) - remoteport, localport, size); - if (size > 0) - vchiq_log_dump_mem("Rcvd", 0, header->data, -- min(64, size)); -+ min(16, size)); - } - - if (((unsigned int)header & VCHIQ_SLOT_MASK) + calc_stride(size) -@@ -2187,7 +2182,7 @@ sync_func(void *v) - remoteport, localport, size); - if (size > 0) - vchiq_log_dump_mem("Rcvd", 0, header->data, -- min(64, size)); -+ min(16, size)); - } - - switch (type) { diff --git a/target/linux/brcm2708/patches-4.9/0096-vchiq_arm-Access-the-dequeue_pending-flag-locked.patch b/target/linux/brcm2708/patches-4.9/0096-vchiq_arm-Access-the-dequeue_pending-flag-locked.patch deleted file mode 100644 index 71c0e304dd4e..000000000000 --- a/target/linux/brcm2708/patches-4.9/0096-vchiq_arm-Access-the-dequeue_pending-flag-locked.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 64e39b18b8d51eb332a84ef79ed3ce0dd2a76808 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 23 Mar 2016 14:16:25 +0000 -Subject: [PATCH] vchiq_arm: Access the dequeue_pending flag locked - -Reading through this code looking for another problem (now found in userland) -the use of dequeue_pending outside a lock didn't seem safe. - -Signed-off-by: Phil Elwell ---- - .../vc04_services/interface/vchiq_arm/vchiq_arm.c | 17 ++++++++++++----- - 1 file changed, 12 insertions(+), 5 deletions(-) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -@@ -279,6 +279,7 @@ service_callback(VCHIQ_REASON_T reason, - USER_SERVICE_T *user_service; - VCHIQ_SERVICE_T *service; - VCHIQ_INSTANCE_T instance; -+ int skip_completion = 0; - DEBUG_INITIALISE(g_state.local) - - DEBUG_TRACE(SERVICE_CALLBACK_LINE); -@@ -345,9 +346,6 @@ service_callback(VCHIQ_REASON_T reason, - user_service->msg_queue[user_service->msg_insert & - (MSG_QUEUE_SIZE - 1)] = header; - user_service->msg_insert++; -- spin_unlock(&msg_queue_spinlock); -- -- up(&user_service->insert_event); - - /* If there is a thread waiting in DEQUEUE_MESSAGE, or if - ** there is a MESSAGE_AVAILABLE in the completion queue then -@@ -356,13 +354,22 @@ service_callback(VCHIQ_REASON_T reason, - if (((user_service->message_available_pos - - instance->completion_remove) >= 0) || - user_service->dequeue_pending) { -- DEBUG_TRACE(SERVICE_CALLBACK_LINE); - user_service->dequeue_pending = 0; -- return VCHIQ_SUCCESS; -+ skip_completion = 1; - } - -+ spin_unlock(&msg_queue_spinlock); -+ -+ up(&user_service->insert_event); -+ - header = NULL; - } -+ -+ if (skip_completion) { -+ DEBUG_TRACE(SERVICE_CALLBACK_LINE); -+ return VCHIQ_SUCCESS; -+ } -+ - DEBUG_TRACE(SERVICE_CALLBACK_LINE); - - return add_completion(instance, reason, header, user_service, diff --git a/target/linux/brcm2708/patches-4.9/0097-vchiq_arm-Service-callbacks-must-not-fail.patch b/target/linux/brcm2708/patches-4.9/0097-vchiq_arm-Service-callbacks-must-not-fail.patch deleted file mode 100644 index f60af85307f3..000000000000 --- a/target/linux/brcm2708/patches-4.9/0097-vchiq_arm-Service-callbacks-must-not-fail.patch +++ /dev/null @@ -1,26 +0,0 @@ -From e518e4dcd42f5a9e3b32a3a54c258320c4752d7e Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 23 Mar 2016 20:53:47 +0000 -Subject: [PATCH] vchiq_arm: Service callbacks must not fail - -Service callbacks are not allowed to return an error. The internal callback -that delivers events and messages to user tasks does not enqueue them if -the service is closing, but this is not an error and should not be -reported as such. - -Signed-off-by: Phil Elwell ---- - drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -@@ -224,7 +224,7 @@ add_completion(VCHIQ_INSTANCE_T instance - } else if (instance->closing) { - vchiq_log_info(vchiq_arm_log_level, - "service_callback closing"); -- return VCHIQ_ERROR; -+ return VCHIQ_SUCCESS; - } - DEBUG_TRACE(SERVICE_CALLBACK_LINE); - } diff --git a/target/linux/brcm2708/patches-4.9/0098-vchiq_arm-Add-completion-records-under-the-mutex.patch b/target/linux/brcm2708/patches-4.9/0098-vchiq_arm-Add-completion-records-under-the-mutex.patch deleted file mode 100644 index 1b8647e86a82..000000000000 --- a/target/linux/brcm2708/patches-4.9/0098-vchiq_arm-Add-completion-records-under-the-mutex.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 152fc9447942bad4e2c6c1e6b86fd252689cc596 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 21 Apr 2016 13:49:32 +0100 -Subject: [PATCH] vchiq_arm: Add completion records under the mutex - -An issue was observed when flushing openmax components -which generate a large number of messages returning -buffers to host. - -We occasionally found a duplicate message from 16 -messages prior, resulting in a buffer returned twice. - -While only one thread adds completions, without the -mutex you don't get the protection of the automatic -memory barrier you get with synchronisation objects. - -Signed-off-by: Phil Elwell ---- - .../staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 13 ++++++++++++- - 1 file changed, 12 insertions(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -@@ -210,6 +210,8 @@ add_completion(VCHIQ_INSTANCE_T instance - VCHIQ_COMPLETION_DATA_T *completion; - DEBUG_INITIALISE(g_state.local) - -+ mutex_lock(&instance->completion_mutex); -+ - while (instance->completion_insert == - (instance->completion_remove + MAX_COMPLETIONS)) { - /* Out of space - wait for the client */ -@@ -217,11 +219,17 @@ add_completion(VCHIQ_INSTANCE_T instance - vchiq_log_trace(vchiq_arm_log_level, - "add_completion - completion queue full"); - DEBUG_COUNT(COMPLETION_QUEUE_FULL_COUNT); -+ -+ mutex_unlock(&instance->completion_mutex); - if (down_interruptible(&instance->remove_event) != 0) { - vchiq_log_info(vchiq_arm_log_level, - "service_callback interrupted"); - return VCHIQ_RETRY; -- } else if (instance->closing) { -+ } -+ -+ mutex_lock(&instance->completion_mutex); -+ if (instance->closing) { -+ mutex_unlock(&instance->completion_mutex); - vchiq_log_info(vchiq_arm_log_level, - "service_callback closing"); - return VCHIQ_SUCCESS; -@@ -254,8 +262,11 @@ add_completion(VCHIQ_INSTANCE_T instance - if (reason == VCHIQ_MESSAGE_AVAILABLE) - user_service->message_available_pos = - instance->completion_insert; -+ - instance->completion_insert++; - -+ mutex_unlock(&instance->completion_mutex); -+ - up(&instance->insert_event); - - return VCHIQ_SUCCESS; diff --git a/target/linux/brcm2708/patches-4.9/0099-vchiq_arm-Avoid-use-of-mutex-in-add_completion.patch b/target/linux/brcm2708/patches-4.9/0099-vchiq_arm-Avoid-use-of-mutex-in-add_completion.patch deleted file mode 100644 index c8cc5b78378b..000000000000 --- a/target/linux/brcm2708/patches-4.9/0099-vchiq_arm-Avoid-use-of-mutex-in-add_completion.patch +++ /dev/null @@ -1,192 +0,0 @@ -From 965475a1620ba1c4f19d6585925a40e3c749d7d1 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 20 Jun 2016 13:51:44 +0100 -Subject: [PATCH] vchiq_arm: Avoid use of mutex in add_completion - -Claiming the completion_mutex within add_completion did prevent some -messages appearing twice, but provokes a deadlock caused by vcsm using -vchiq within a page fault handler. - -Revert the use of completion_mutex, and instead fix the original -problem using more memory barriers. - -Signed-off-by: Phil Elwell ---- - .../vc04_services/interface/vchiq_arm/vchiq_arm.c | 55 +++++++++++----------- - .../vc04_services/interface/vchiq_arm/vchiq_core.c | 14 ++++-- - 2 files changed, 37 insertions(+), 32 deletions(-) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -@@ -64,10 +64,10 @@ - #define VCHIQ_MINOR 0 - - /* Some per-instance constants */ --#define MAX_COMPLETIONS 16 -+#define MAX_COMPLETIONS 128 - #define MAX_SERVICES 64 - #define MAX_ELEMENTS 8 --#define MSG_QUEUE_SIZE 64 -+#define MSG_QUEUE_SIZE 128 - - #define KEEPALIVE_VER 1 - #define KEEPALIVE_VER_MIN KEEPALIVE_VER -@@ -208,28 +208,24 @@ add_completion(VCHIQ_INSTANCE_T instance - void *bulk_userdata) - { - VCHIQ_COMPLETION_DATA_T *completion; -+ int insert; - DEBUG_INITIALISE(g_state.local) - -- mutex_lock(&instance->completion_mutex); -- -- while (instance->completion_insert == -- (instance->completion_remove + MAX_COMPLETIONS)) { -+ insert = instance->completion_insert; -+ while ((insert - instance->completion_remove) >= MAX_COMPLETIONS) { - /* Out of space - wait for the client */ - DEBUG_TRACE(SERVICE_CALLBACK_LINE); - vchiq_log_trace(vchiq_arm_log_level, - "add_completion - completion queue full"); - DEBUG_COUNT(COMPLETION_QUEUE_FULL_COUNT); - -- mutex_unlock(&instance->completion_mutex); - if (down_interruptible(&instance->remove_event) != 0) { - vchiq_log_info(vchiq_arm_log_level, - "service_callback interrupted"); - return VCHIQ_RETRY; - } - -- mutex_lock(&instance->completion_mutex); - if (instance->closing) { -- mutex_unlock(&instance->completion_mutex); - vchiq_log_info(vchiq_arm_log_level, - "service_callback closing"); - return VCHIQ_SUCCESS; -@@ -237,9 +233,7 @@ add_completion(VCHIQ_INSTANCE_T instance - DEBUG_TRACE(SERVICE_CALLBACK_LINE); - } - -- completion = -- &instance->completions[instance->completion_insert & -- (MAX_COMPLETIONS - 1)]; -+ completion = &instance->completions[insert & (MAX_COMPLETIONS - 1)]; - - completion->header = header; - completion->reason = reason; -@@ -260,12 +254,9 @@ add_completion(VCHIQ_INSTANCE_T instance - wmb(); - - if (reason == VCHIQ_MESSAGE_AVAILABLE) -- user_service->message_available_pos = -- instance->completion_insert; -- -- instance->completion_insert++; -+ user_service->message_available_pos = insert; - -- mutex_unlock(&instance->completion_mutex); -+ instance->completion_insert = ++insert; - - up(&instance->insert_event); - -@@ -795,6 +786,7 @@ vchiq_ioctl(struct file *file, unsigned - instance->completion_insert) - && !instance->closing) { - int rc; -+ - DEBUG_TRACE(AWAIT_COMPLETION_LINE); - mutex_unlock(&instance->completion_mutex); - rc = down_interruptible(&instance->insert_event); -@@ -809,24 +801,29 @@ vchiq_ioctl(struct file *file, unsigned - } - DEBUG_TRACE(AWAIT_COMPLETION_LINE); - -- /* A read memory barrier is needed to stop prefetch of a stale -- ** completion record -- */ -- rmb(); -- - if (ret == 0) { - int msgbufcount = args.msgbufcount; -+ int remove; -+ -+ remove = instance->completion_remove; -+ - for (ret = 0; ret < args.count; ret++) { - VCHIQ_COMPLETION_DATA_T *completion; - VCHIQ_SERVICE_T *service; - USER_SERVICE_T *user_service; - VCHIQ_HEADER_T *header; -- if (instance->completion_remove == -- instance->completion_insert) -+ -+ if (remove == instance->completion_insert) - break; -+ - completion = &instance->completions[ -- instance->completion_remove & -- (MAX_COMPLETIONS - 1)]; -+ remove & (MAX_COMPLETIONS - 1)]; -+ -+ -+ /* A read memory barrier is needed to prevent -+ ** the prefetch of a stale completion record -+ */ -+ rmb(); - - service = completion->service_userdata; - user_service = service->base.userdata; -@@ -903,7 +900,11 @@ vchiq_ioctl(struct file *file, unsigned - break; - } - -- instance->completion_remove++; -+ /* Ensure that the above copy has completed -+ ** before advancing the remove pointer. */ -+ mb(); -+ -+ instance->completion_remove = ++remove; - } - - if (msgbufcount != args.msgbufcount) { ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c -@@ -610,15 +610,15 @@ process_free_queue(VCHIQ_STATE_T *state) - BITSET_T service_found[BITSET_SIZE(VCHIQ_MAX_SERVICES)]; - int slot_queue_available; - -- /* Use a read memory barrier to ensure that any state that may have -- ** been modified by another thread is not masked by stale prefetched -- ** values. */ -- rmb(); -- - /* Find slots which have been freed by the other side, and return them - ** to the available queue. */ - slot_queue_available = state->slot_queue_available; - -+ /* Use a memory barrier to ensure that any state that may have been -+ ** modified by another thread is not masked by stale prefetched -+ ** values. */ -+ mb(); -+ - while (slot_queue_available != local->slot_queue_recycle) { - unsigned int pos; - int slot_index = local->slot_queue[slot_queue_available++ & -@@ -626,6 +626,8 @@ process_free_queue(VCHIQ_STATE_T *state) - char *data = (char *)SLOT_DATA_FROM_INDEX(state, slot_index); - int data_found = 0; - -+ rmb(); -+ - vchiq_log_trace(vchiq_core_log_level, "%d: pfq %d=%x %x %x", - state->id, slot_index, (unsigned int)data, - local->slot_queue_recycle, slot_queue_available); -@@ -741,6 +743,8 @@ process_free_queue(VCHIQ_STATE_T *state) - up(&state->data_quota_event); - } - -+ mb(); -+ - state->slot_queue_available = slot_queue_available; - up(&state->slot_available_event); - } diff --git a/target/linux/brcm2708/patches-4.9/0100-staging-vchi-Convert-to-current-get_user_pages-argum.patch b/target/linux/brcm2708/patches-4.9/0100-staging-vchi-Convert-to-current-get_user_pages-argum.patch deleted file mode 100644 index e80c414633a8..000000000000 --- a/target/linux/brcm2708/patches-4.9/0100-staging-vchi-Convert-to-current-get_user_pages-argum.patch +++ /dev/null @@ -1,34 +0,0 @@ -From ec643be82b145a65d9c78d24eea7470b9bb6e0c4 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 3 Oct 2016 10:14:10 -0700 -Subject: [PATCH] staging/vchi: Convert to current get_user_pages() arguments. - -Signed-off-by: Eric Anholt ---- - drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c | 2 +- - drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 3 +-- - 2 files changed, 2 insertions(+), 3 deletions(-) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c -@@ -420,7 +420,7 @@ create_pagelist(char __user *buf, size_t - *need_release = 0; /* do not try and release vmalloc pages */ - } else { - down_read(&task->mm->mmap_sem); -- actual_pages = get_user_pages(task, task->mm, -+ actual_pages = get_user_pages( - (unsigned long)buf & ~(PAGE_SIZE - 1), - num_pages, - (type == PAGELIST_READ) ? FOLL_WRITE : 0, ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -@@ -1492,8 +1492,7 @@ dump_phys_mem(void *virt_addr, uint32_t - } - - down_read(¤t->mm->mmap_sem); -- rc = get_user_pages(current, /* task */ -- current->mm, /* mm */ -+ rc = get_user_pages( - (unsigned long)virt_addr, /* start */ - num_pages, /* len */ - 0, /* gup_flags */ diff --git a/target/linux/brcm2708/patches-4.9/0101-staging-vchi-Update-for-rename-of-page_cache_release.patch b/target/linux/brcm2708/patches-4.9/0101-staging-vchi-Update-for-rename-of-page_cache_release.patch deleted file mode 100644 index eccb792ee9cd..000000000000 --- a/target/linux/brcm2708/patches-4.9/0101-staging-vchi-Update-for-rename-of-page_cache_release.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 5e8386a65d2b7fd157d2a6e2f9b8ca79011976b7 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 3 Oct 2016 10:16:03 -0700 -Subject: [PATCH] staging/vchi: Update for rename of page_cache_release() to - put_page(). - -Signed-off-by: Eric Anholt ---- - drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c | 4 ++-- - drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 2 +- - 2 files changed, 3 insertions(+), 3 deletions(-) - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c -@@ -438,7 +438,7 @@ create_pagelist(char __user *buf, size_t - while (actual_pages > 0) - { - actual_pages--; -- page_cache_release(pages[actual_pages]); -+ put_page(pages[actual_pages]); - } - kfree(pagelist); - if (actual_pages == 0) -@@ -577,7 +577,7 @@ free_pagelist(PAGELIST_T *pagelist, int - offset = 0; - set_page_dirty(pg); - } -- page_cache_release(pg); -+ put_page(pg); - } - } - ---- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c -@@ -1530,7 +1530,7 @@ dump_phys_mem(void *virt_addr, uint32_t - kunmap(page); - - for (page_idx = 0; page_idx < num_pages; page_idx++) -- page_cache_release(pages[page_idx]); -+ put_page(pages[page_idx]); - - kfree(pages); - } diff --git a/target/linux/brcm2708/patches-4.9/0102-drivers-vchi-Remove-dependency-on-CONFIG_BROKEN.patch b/target/linux/brcm2708/patches-4.9/0102-drivers-vchi-Remove-dependency-on-CONFIG_BROKEN.patch deleted file mode 100644 index 8ec807e0654b..000000000000 --- a/target/linux/brcm2708/patches-4.9/0102-drivers-vchi-Remove-dependency-on-CONFIG_BROKEN.patch +++ /dev/null @@ -1,22 +0,0 @@ -From b909c0f36c535e3f3042517d1b59b9c0538cc1d0 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 3 Oct 2016 10:21:17 -0700 -Subject: [PATCH] drivers/vchi: Remove dependency on CONFIG_BROKEN. - -The driver builds now. - -Signed-off-by: Eric Anholt ---- - drivers/staging/vc04_services/Kconfig | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/staging/vc04_services/Kconfig -+++ b/drivers/staging/vc04_services/Kconfig -@@ -1,6 +1,6 @@ - config BCM2708_VCHIQ - tristate "Videocore VCHIQ" -- depends on RASPBERRYPI_FIRMWARE && BROKEN -+ depends on RASPBERRYPI_FIRMWARE - default y - help - Kernel to VideoCore communication interface for the diff --git a/target/linux/brcm2708/patches-4.9/0103-raspberrypi-firmware-Export-the-general-transaction-.patch b/target/linux/brcm2708/patches-4.9/0103-raspberrypi-firmware-Export-the-general-transaction-.patch deleted file mode 100644 index a316b409c4eb..000000000000 --- a/target/linux/brcm2708/patches-4.9/0103-raspberrypi-firmware-Export-the-general-transaction-.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 34454ca8cf9b63b0973fb23271810461a45a9884 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 14 Sep 2016 09:16:19 +0100 -Subject: [PATCH] raspberrypi-firmware: Export the general transaction - function. - -The vc4-firmware-kms module is going to be doing the MBOX FB call. - -Signed-off-by: Eric Anholt ---- - drivers/firmware/raspberrypi.c | 3 ++- - include/soc/bcm2835/raspberrypi-firmware.h | 1 + - 2 files changed, 3 insertions(+), 1 deletion(-) - ---- a/drivers/firmware/raspberrypi.c -+++ b/drivers/firmware/raspberrypi.c -@@ -42,7 +42,7 @@ static void response_callback(struct mbo - * Sends a request to the firmware through the BCM2835 mailbox driver, - * and synchronously waits for the reply. - */ --static int -+int - rpi_firmware_transaction(struct rpi_firmware *fw, u32 chan, u32 data) - { - u32 message = MBOX_MSG(chan, data); -@@ -63,6 +63,7 @@ rpi_firmware_transaction(struct rpi_firm - - return ret; - } -+EXPORT_SYMBOL_GPL(rpi_firmware_transaction); - - /** - * rpi_firmware_property_list - Submit firmware property list ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -131,5 +131,6 @@ int rpi_firmware_property(struct rpi_fir - int rpi_firmware_property_list(struct rpi_firmware *fw, - void *data, size_t tag_size); - struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node); -+int rpi_firmware_transaction(struct rpi_firmware *fw, u32 chan, u32 data); - - #endif /* __SOC_RASPBERRY_FIRMWARE_H__ */ diff --git a/target/linux/brcm2708/patches-4.9/0104-raspberrypi-firmware-Define-the-MBOX-channel-in-the-.patch b/target/linux/brcm2708/patches-4.9/0104-raspberrypi-firmware-Define-the-MBOX-channel-in-the-.patch deleted file mode 100644 index 0b9ef718230f..000000000000 --- a/target/linux/brcm2708/patches-4.9/0104-raspberrypi-firmware-Define-the-MBOX-channel-in-the-.patch +++ /dev/null @@ -1,21 +0,0 @@ -From bf20c77c459b00873d5862cfe7ba745a543d53de Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 14 Sep 2016 09:18:09 +0100 -Subject: [PATCH] raspberrypi-firmware: Define the MBOX channel in the header. - -Signed-off-by: Eric Anholt ---- - include/soc/bcm2835/raspberrypi-firmware.h | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -12,6 +12,8 @@ - #include - #include - -+#define RPI_FIRMWARE_CHAN_FB 1 -+ - struct rpi_firmware; - - enum rpi_firmware_property_status { diff --git a/target/linux/brcm2708/patches-4.9/0105-drm-vc4-Add-a-mode-for-using-the-closed-firmware-for.patch b/target/linux/brcm2708/patches-4.9/0105-drm-vc4-Add-a-mode-for-using-the-closed-firmware-for.patch deleted file mode 100644 index 88952dc0c0da..000000000000 --- a/target/linux/brcm2708/patches-4.9/0105-drm-vc4-Add-a-mode-for-using-the-closed-firmware-for.patch +++ /dev/null @@ -1,758 +0,0 @@ -From ffd9952ec22321af8e891aa4cf9d79d90c4b23b6 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 14 Sep 2016 08:39:33 +0100 -Subject: [PATCH] drm/vc4: Add a mode for using the closed firmware for - display. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/Makefile | 1 + - drivers/gpu/drm/vc4/vc4_crtc.c | 13 + - drivers/gpu/drm/vc4/vc4_drv.c | 1 + - drivers/gpu/drm/vc4/vc4_drv.h | 7 + - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 660 +++++++++++++++++++++++++++++++++ - 5 files changed, 682 insertions(+) - create mode 100644 drivers/gpu/drm/vc4/vc4_firmware_kms.c - ---- a/drivers/gpu/drm/vc4/Makefile -+++ b/drivers/gpu/drm/vc4/Makefile -@@ -8,6 +8,7 @@ vc4-y := \ - vc4_crtc.o \ - vc4_drv.o \ - vc4_dpi.o \ -+ vc4_firmware_kms.o \ - vc4_kms.o \ - vc4_gem.o \ - vc4_hdmi.o \ ---- a/drivers/gpu/drm/vc4/vc4_crtc.c -+++ b/drivers/gpu/drm/vc4/vc4_crtc.c -@@ -163,6 +163,9 @@ int vc4_crtc_get_scanoutpos(struct drm_d - int vblank_lines; - int ret = 0; - -+ if (vc4->firmware_kms) -+ return 0; -+ - /* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */ - - /* Get optional system timestamp before query. */ -@@ -656,6 +659,11 @@ int vc4_enable_vblank(struct drm_device - struct vc4_dev *vc4 = to_vc4_dev(dev); - struct vc4_crtc *vc4_crtc = vc4->crtc[crtc_id]; - -+ if (vc4->firmware_kms) { -+ /* XXX: Can we mask the SMI interrupt? */ -+ return 0; -+ } -+ - CRTC_WRITE(PV_INTEN, PV_INT_VFP_START); - - return 0; -@@ -666,6 +674,11 @@ void vc4_disable_vblank(struct drm_devic - struct vc4_dev *vc4 = to_vc4_dev(dev); - struct vc4_crtc *vc4_crtc = vc4->crtc[crtc_id]; - -+ if (vc4->firmware_kms) { -+ /* XXX: Can we mask the SMI interrupt? */ -+ return; -+ } -+ - CRTC_WRITE(PV_INTEN, 0); - } - ---- a/drivers/gpu/drm/vc4/vc4_drv.c -+++ b/drivers/gpu/drm/vc4/vc4_drv.c -@@ -292,6 +292,7 @@ static struct platform_driver *const com - &vc4_dpi_driver, - &vc4_hvs_driver, - &vc4_crtc_driver, -+ &vc4_firmware_kms_driver, - &vc4_v3d_driver, - }; - ---- a/drivers/gpu/drm/vc4/vc4_drv.h -+++ b/drivers/gpu/drm/vc4/vc4_drv.h -@@ -12,6 +12,9 @@ - struct vc4_dev { - struct drm_device *dev; - -+ bool firmware_kms; -+ struct rpi_firmware *firmware; -+ - struct vc4_hdmi *hdmi; - struct vc4_hvs *hvs; - struct vc4_crtc *crtc[3]; -@@ -460,6 +463,10 @@ void __iomem *vc4_ioremap_regs(struct pl - extern struct platform_driver vc4_dpi_driver; - int vc4_dpi_debugfs_regs(struct seq_file *m, void *unused); - -+/* vc4_firmware_kms.c */ -+extern struct platform_driver vc4_firmware_kms_driver; -+void vc4_fkms_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file); -+ - /* vc4_gem.c */ - void vc4_gem_init(struct drm_device *dev); - void vc4_gem_destroy(struct drm_device *dev); ---- /dev/null -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -0,0 +1,660 @@ -+/* -+ * Copyright (C) 2016 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+/** -+ * DOC: VC4 firmware KMS module. -+ * -+ * As a hack to get us from the current closed source driver world -+ * toward a totally open stack, implement KMS on top of the Raspberry -+ * Pi's firmware display stack. -+ */ -+ -+#include "drm_atomic.h" -+#include "drm_atomic_helper.h" -+#include "drm_plane_helper.h" -+#include "drm_crtc_helper.h" -+#include "linux/clk.h" -+#include "linux/debugfs.h" -+#include "drm_fb_cma_helper.h" -+#include "linux/component.h" -+#include "linux/of_device.h" -+#include "vc4_drv.h" -+#include "vc4_regs.h" -+#include -+ -+/* The firmware delivers a vblank interrupt to us through the SMI -+ * hardware, which has only this one register. -+ */ -+#define SMICS 0x0 -+#define SMICS_INTERRUPTS (BIT(9) | BIT(10) | BIT(11)) -+ -+struct vc4_crtc { -+ struct drm_crtc base; -+ struct drm_encoder *encoder; -+ struct drm_connector *connector; -+ void __iomem *regs; -+ -+ struct drm_pending_vblank_event *event; -+}; -+ -+static inline struct vc4_crtc *to_vc4_crtc(struct drm_crtc *crtc) -+{ -+ return container_of(crtc, struct vc4_crtc, base); -+} -+ -+struct vc4_fkms_encoder { -+ struct drm_encoder base; -+}; -+ -+static inline struct vc4_fkms_encoder * -+to_vc4_fkms_encoder(struct drm_encoder *encoder) -+{ -+ return container_of(encoder, struct vc4_fkms_encoder, base); -+} -+ -+/* VC4 FKMS connector KMS struct */ -+struct vc4_fkms_connector { -+ struct drm_connector base; -+ -+ /* Since the connector is attached to just the one encoder, -+ * this is the reference to it so we can do the best_encoder() -+ * hook. -+ */ -+ struct drm_encoder *encoder; -+}; -+ -+static inline struct vc4_fkms_connector * -+to_vc4_fkms_connector(struct drm_connector *connector) -+{ -+ return container_of(connector, struct vc4_fkms_connector, base); -+} -+ -+/* Firmware's structure for making an FB mbox call. */ -+struct fbinfo_s { -+ u32 xres, yres, xres_virtual, yres_virtual; -+ u32 pitch, bpp; -+ u32 xoffset, yoffset; -+ u32 base; -+ u32 screen_size; -+ u16 cmap[256]; -+}; -+ -+struct vc4_fkms_plane { -+ struct drm_plane base; -+ struct fbinfo_s *fbinfo; -+ dma_addr_t fbinfo_bus_addr; -+ u32 pitch; -+}; -+ -+static inline struct vc4_fkms_plane *to_vc4_fkms_plane(struct drm_plane *plane) -+{ -+ return (struct vc4_fkms_plane *)plane; -+} -+ -+/* Turns the display on/off. */ -+static int vc4_plane_set_primary_blank(struct drm_plane *plane, bool blank) -+{ -+ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); -+ -+ u32 packet = blank; -+ return rpi_firmware_property(vc4->firmware, -+ RPI_FIRMWARE_FRAMEBUFFER_BLANK, -+ &packet, sizeof(packet)); -+} -+ -+static void vc4_primary_plane_atomic_update(struct drm_plane *plane, -+ struct drm_plane_state *old_state) -+{ -+ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); -+ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); -+ struct drm_plane_state *state = plane->state; -+ struct drm_framebuffer *fb = state->fb; -+ struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); -+ volatile struct fbinfo_s *fbinfo = vc4_plane->fbinfo; -+ u32 bpp = 32; -+ int ret; -+ -+ vc4_plane_set_primary_blank(plane, false); -+ -+ fbinfo->xres = state->crtc_w; -+ fbinfo->yres = state->crtc_h; -+ fbinfo->xres_virtual = state->crtc_w; -+ fbinfo->yres_virtual = state->crtc_h; -+ fbinfo->bpp = bpp; -+ fbinfo->xoffset = state->crtc_x; -+ fbinfo->yoffset = state->crtc_y; -+ fbinfo->base = bo->paddr + fb->offsets[0]; -+ fbinfo->pitch = fb->pitches[0]; -+ /* A bug in the firmware makes it so that if the fb->base is -+ * set to nonzero, the configured pitch gets overwritten with -+ * the previous pitch. So, to get the configured pitch -+ * recomputed, we have to make it allocate itself a new buffer -+ * in VC memory, first. -+ */ -+ if (vc4_plane->pitch != fb->pitches[0]) { -+ u32 saved_base = fbinfo->base; -+ fbinfo->base = 0; -+ -+ ret = rpi_firmware_transaction(vc4->firmware, -+ RPI_FIRMWARE_CHAN_FB, -+ vc4_plane->fbinfo_bus_addr); -+ fbinfo->base = saved_base; -+ -+ vc4_plane->pitch = fbinfo->pitch; -+ WARN_ON_ONCE(vc4_plane->pitch != fb->pitches[0]); -+ } -+ -+ ret = rpi_firmware_transaction(vc4->firmware, -+ RPI_FIRMWARE_CHAN_FB, -+ vc4_plane->fbinfo_bus_addr); -+ WARN_ON_ONCE(fbinfo->pitch != fb->pitches[0]); -+ WARN_ON_ONCE(fbinfo->base != bo->paddr + fb->offsets[0]); -+} -+ -+static void vc4_primary_plane_atomic_disable(struct drm_plane *plane, -+ struct drm_plane_state *old_state) -+{ -+ vc4_plane_set_primary_blank(plane, true); -+} -+ -+static void vc4_cursor_plane_atomic_update(struct drm_plane *plane, -+ struct drm_plane_state *old_state) -+{ -+ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); -+ struct drm_plane_state *state = plane->state; -+ struct drm_framebuffer *fb = state->fb; -+ struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); -+ int ret; -+ u32 packet_state[] = { true, state->crtc_x, state->crtc_y, 0 }; -+ u32 packet_info[] = { state->crtc_w, state->crtc_h, -+ 0, /* unused */ -+ bo->paddr + fb->offsets[0], -+ 0, 0, /* hotx, hoty */}; -+ WARN_ON_ONCE(fb->pitches[0] != state->crtc_w * 4); -+ WARN_ON_ONCE(fb->bits_per_pixel != 32); -+ -+ ret = rpi_firmware_property(vc4->firmware, -+ RPI_FIRMWARE_SET_CURSOR_STATE, -+ &packet_state, -+ sizeof(packet_state)); -+ if (ret || packet_state[0] != 0) -+ DRM_ERROR("Failed to set cursor state: 0x%08x\n", packet_state[0]); -+ -+ ret = rpi_firmware_property(vc4->firmware, -+ RPI_FIRMWARE_SET_CURSOR_INFO, -+ &packet_info, -+ sizeof(packet_info)); -+ if (ret || packet_info[0] != 0) -+ DRM_ERROR("Failed to set cursor info: 0x%08x\n", packet_info[0]); -+} -+ -+static void vc4_cursor_plane_atomic_disable(struct drm_plane *plane, -+ struct drm_plane_state *old_state) -+{ -+ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); -+ u32 packet_state[] = { false, 0, 0, 0 }; -+ int ret; -+ -+ ret = rpi_firmware_property(vc4->firmware, -+ RPI_FIRMWARE_SET_CURSOR_STATE, -+ &packet_state, -+ sizeof(packet_state)); -+ if (ret || packet_state[0] != 0) -+ DRM_ERROR("Failed to set cursor state: 0x%08x\n", packet_state[0]); -+} -+ -+static int vc4_plane_atomic_check(struct drm_plane *plane, -+ struct drm_plane_state *state) -+{ -+ return 0; -+} -+ -+static void vc4_plane_destroy(struct drm_plane *plane) -+{ -+ drm_plane_helper_disable(plane); -+ drm_plane_cleanup(plane); -+} -+ -+static const struct drm_plane_funcs vc4_plane_funcs = { -+ .update_plane = drm_atomic_helper_update_plane, -+ .disable_plane = drm_atomic_helper_disable_plane, -+ .destroy = vc4_plane_destroy, -+ .set_property = NULL, -+ .reset = drm_atomic_helper_plane_reset, -+ .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, -+ .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, -+}; -+ -+static const struct drm_plane_helper_funcs vc4_primary_plane_helper_funcs = { -+ .prepare_fb = NULL, -+ .cleanup_fb = NULL, -+ .atomic_check = vc4_plane_atomic_check, -+ .atomic_update = vc4_primary_plane_atomic_update, -+ .atomic_disable = vc4_primary_plane_atomic_disable, -+}; -+ -+static const struct drm_plane_helper_funcs vc4_cursor_plane_helper_funcs = { -+ .prepare_fb = NULL, -+ .cleanup_fb = NULL, -+ .atomic_check = vc4_plane_atomic_check, -+ .atomic_update = vc4_cursor_plane_atomic_update, -+ .atomic_disable = vc4_cursor_plane_atomic_disable, -+}; -+ -+static struct drm_plane *vc4_fkms_plane_init(struct drm_device *dev, -+ enum drm_plane_type type) -+{ -+ struct drm_plane *plane = NULL; -+ struct vc4_fkms_plane *vc4_plane; -+ u32 xrgb8888 = DRM_FORMAT_XRGB8888; -+ u32 argb8888 = DRM_FORMAT_ARGB8888; -+ int ret = 0; -+ bool primary = (type == DRM_PLANE_TYPE_PRIMARY); -+ -+ vc4_plane = devm_kzalloc(dev->dev, sizeof(*vc4_plane), -+ GFP_KERNEL); -+ if (!vc4_plane) { -+ ret = -ENOMEM; -+ goto fail; -+ } -+ -+ plane = &vc4_plane->base; -+ ret = drm_universal_plane_init(dev, plane, 0xff, -+ &vc4_plane_funcs, -+ primary ? &xrgb8888 : &argb8888, 1, -+ type, NULL); -+ -+ if (type == DRM_PLANE_TYPE_PRIMARY) { -+ vc4_plane->fbinfo = -+ dma_alloc_coherent(dev->dev, -+ sizeof(*vc4_plane->fbinfo), -+ &vc4_plane->fbinfo_bus_addr, -+ GFP_KERNEL); -+ memset(vc4_plane->fbinfo, 0, sizeof(*vc4_plane->fbinfo)); -+ -+ drm_plane_helper_add(plane, &vc4_primary_plane_helper_funcs); -+ } else { -+ drm_plane_helper_add(plane, &vc4_cursor_plane_helper_funcs); -+ } -+ -+ return plane; -+fail: -+ if (plane) -+ vc4_plane_destroy(plane); -+ -+ return ERR_PTR(ret); -+} -+ -+static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc) -+{ -+ /* Everyting is handled in the planes. */ -+} -+ -+static void vc4_crtc_disable(struct drm_crtc *crtc) -+{ -+} -+ -+static void vc4_crtc_enable(struct drm_crtc *crtc) -+{ -+} -+ -+static int vc4_crtc_atomic_check(struct drm_crtc *crtc, -+ struct drm_crtc_state *state) -+{ -+ return 0; -+} -+ -+static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, -+ struct drm_crtc_state *old_state) -+{ -+} -+ -+static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) -+{ -+ struct drm_crtc *crtc = &vc4_crtc->base; -+ struct drm_device *dev = crtc->dev; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&dev->event_lock, flags); -+ if (vc4_crtc->event) { -+ drm_crtc_send_vblank_event(crtc, vc4_crtc->event); -+ vc4_crtc->event = NULL; -+ drm_crtc_vblank_put(crtc); -+ } -+ spin_unlock_irqrestore(&dev->event_lock, flags); -+} -+ -+static irqreturn_t vc4_crtc_irq_handler(int irq, void *data) -+{ -+ struct vc4_crtc *vc4_crtc = data; -+ u32 stat = readl(vc4_crtc->regs + SMICS); -+ irqreturn_t ret = IRQ_NONE; -+ -+ if (stat & SMICS_INTERRUPTS) { -+ writel(0, vc4_crtc->regs + SMICS); -+ drm_crtc_handle_vblank(&vc4_crtc->base); -+ vc4_crtc_handle_page_flip(vc4_crtc); -+ ret = IRQ_HANDLED; -+ } -+ -+ return ret; -+} -+ -+static int vc4_page_flip(struct drm_crtc *crtc, -+ struct drm_framebuffer *fb, -+ struct drm_pending_vblank_event *event, -+ uint32_t flags) -+{ -+ if (flags & DRM_MODE_PAGE_FLIP_ASYNC) { -+ DRM_ERROR("Async flips aren't allowed\n"); -+ return -EINVAL; -+ } -+ -+ return drm_atomic_helper_page_flip(crtc, fb, event, flags); -+} -+ -+static const struct drm_crtc_funcs vc4_crtc_funcs = { -+ .set_config = drm_atomic_helper_set_config, -+ .destroy = drm_crtc_cleanup, -+ .page_flip = vc4_page_flip, -+ .set_property = NULL, -+ .cursor_set = NULL, /* handled by drm_mode_cursor_universal */ -+ .cursor_move = NULL, /* handled by drm_mode_cursor_universal */ -+ .reset = drm_atomic_helper_crtc_reset, -+ .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, -+ .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, -+}; -+ -+static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = { -+ .mode_set_nofb = vc4_crtc_mode_set_nofb, -+ .disable = vc4_crtc_disable, -+ .enable = vc4_crtc_enable, -+ .atomic_check = vc4_crtc_atomic_check, -+ .atomic_flush = vc4_crtc_atomic_flush, -+}; -+ -+/* Frees the page flip event when the DRM device is closed with the -+ * event still outstanding. -+ */ -+void vc4_fkms_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file) -+{ -+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -+ struct drm_device *dev = crtc->dev; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&dev->event_lock, flags); -+ -+ if (vc4_crtc->event && vc4_crtc->event->base.file_priv == file) { -+ kfree(&vc4_crtc->event->base); -+ drm_crtc_vblank_put(crtc); -+ vc4_crtc->event = NULL; -+ } -+ -+ spin_unlock_irqrestore(&dev->event_lock, flags); -+} -+ -+static const struct of_device_id vc4_firmware_kms_dt_match[] = { -+ { .compatible = "raspberrypi,rpi-firmware-kms" }, -+ {} -+}; -+ -+static enum drm_connector_status -+vc4_fkms_connector_detect(struct drm_connector *connector, bool force) -+{ -+ return connector_status_connected; -+} -+ -+static int vc4_fkms_connector_get_modes(struct drm_connector *connector) -+{ -+ struct drm_device *dev = connector->dev; -+ struct vc4_dev *vc4 = to_vc4_dev(dev); -+ u32 wh[2] = {0, 0}; -+ int ret; -+ struct drm_display_mode *mode; -+ -+ ret = rpi_firmware_property(vc4->firmware, -+ RPI_FIRMWARE_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT, -+ &wh, sizeof(wh)); -+ if (ret) { -+ DRM_ERROR("Failed to get screen size: %d (0x%08x 0x%08x)\n", -+ ret, wh[0], wh[1]); -+ return 0; -+ } -+ -+ mode = drm_cvt_mode(dev, wh[0], wh[1], 60 /* vrefresh */, -+ 0, 0, false); -+ drm_mode_probed_add(connector, mode); -+ -+ return 1; -+} -+ -+static struct drm_encoder * -+vc4_fkms_connector_best_encoder(struct drm_connector *connector) -+{ -+ struct vc4_fkms_connector *fkms_connector = -+ to_vc4_fkms_connector(connector); -+ return fkms_connector->encoder; -+} -+ -+static void vc4_fkms_connector_destroy(struct drm_connector *connector) -+{ -+ drm_connector_unregister(connector); -+ drm_connector_cleanup(connector); -+} -+ -+static const struct drm_connector_funcs vc4_fkms_connector_funcs = { -+ .dpms = drm_atomic_helper_connector_dpms, -+ .detect = vc4_fkms_connector_detect, -+ .fill_modes = drm_helper_probe_single_connector_modes, -+ .destroy = vc4_fkms_connector_destroy, -+ .reset = drm_atomic_helper_connector_reset, -+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, -+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -+}; -+ -+static const struct drm_connector_helper_funcs vc4_fkms_connector_helper_funcs = { -+ .get_modes = vc4_fkms_connector_get_modes, -+ .best_encoder = vc4_fkms_connector_best_encoder, -+}; -+ -+static struct drm_connector *vc4_fkms_connector_init(struct drm_device *dev, -+ struct drm_encoder *encoder) -+{ -+ struct drm_connector *connector = NULL; -+ struct vc4_fkms_connector *fkms_connector; -+ int ret = 0; -+ -+ fkms_connector = devm_kzalloc(dev->dev, sizeof(*fkms_connector), -+ GFP_KERNEL); -+ if (!fkms_connector) { -+ ret = -ENOMEM; -+ goto fail; -+ } -+ connector = &fkms_connector->base; -+ -+ fkms_connector->encoder = encoder; -+ -+ drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, -+ DRM_MODE_CONNECTOR_HDMIA); -+ drm_connector_helper_add(connector, &vc4_fkms_connector_helper_funcs); -+ -+ connector->polled = (DRM_CONNECTOR_POLL_CONNECT | -+ DRM_CONNECTOR_POLL_DISCONNECT); -+ -+ connector->interlace_allowed = 0; -+ connector->doublescan_allowed = 0; -+ -+ drm_mode_connector_attach_encoder(connector, encoder); -+ -+ return connector; -+ -+ fail: -+ if (connector) -+ vc4_fkms_connector_destroy(connector); -+ -+ return ERR_PTR(ret); -+} -+ -+static void vc4_fkms_encoder_destroy(struct drm_encoder *encoder) -+{ -+ drm_encoder_cleanup(encoder); -+} -+ -+static const struct drm_encoder_funcs vc4_fkms_encoder_funcs = { -+ .destroy = vc4_fkms_encoder_destroy, -+}; -+ -+static void vc4_fkms_encoder_enable(struct drm_encoder *encoder) -+{ -+} -+ -+static void vc4_fkms_encoder_disable(struct drm_encoder *encoder) -+{ -+} -+ -+static const struct drm_encoder_helper_funcs vc4_fkms_encoder_helper_funcs = { -+ .enable = vc4_fkms_encoder_enable, -+ .disable = vc4_fkms_encoder_disable, -+}; -+ -+static int vc4_fkms_bind(struct device *dev, struct device *master, void *data) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ struct drm_device *drm = dev_get_drvdata(master); -+ struct vc4_dev *vc4 = to_vc4_dev(drm); -+ struct vc4_crtc *vc4_crtc; -+ struct vc4_fkms_encoder *vc4_encoder; -+ struct drm_crtc *crtc; -+ struct drm_plane *primary_plane, *cursor_plane, *destroy_plane, *temp; -+ struct device_node *firmware_node; -+ int ret; -+ -+ vc4->firmware_kms = true; -+ -+ vc4_crtc = devm_kzalloc(dev, sizeof(*vc4_crtc), GFP_KERNEL); -+ if (!vc4_crtc) -+ return -ENOMEM; -+ crtc = &vc4_crtc->base; -+ -+ firmware_node = of_parse_phandle(dev->of_node, "brcm,firmware", 0); -+ vc4->firmware = rpi_firmware_get(firmware_node); -+ if (!vc4->firmware) { -+ DRM_DEBUG("Failed to get Raspberry Pi firmware reference.\n"); -+ return -EPROBE_DEFER; -+ } -+ of_node_put(firmware_node); -+ -+ /* Map the SMI interrupt reg */ -+ vc4_crtc->regs = vc4_ioremap_regs(pdev, 0); -+ if (IS_ERR(vc4_crtc->regs)) -+ return PTR_ERR(vc4_crtc->regs); -+ -+ /* For now, we create just the primary and the legacy cursor -+ * planes. We should be able to stack more planes on easily, -+ * but to do that we would need to compute the bandwidth -+ * requirement of the plane configuration, and reject ones -+ * that will take too much. -+ */ -+ primary_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_PRIMARY); -+ if (IS_ERR(primary_plane)) { -+ dev_err(dev, "failed to construct primary plane\n"); -+ ret = PTR_ERR(primary_plane); -+ goto err; -+ } -+ -+ cursor_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_CURSOR); -+ if (IS_ERR(cursor_plane)) { -+ dev_err(dev, "failed to construct cursor plane\n"); -+ ret = PTR_ERR(cursor_plane); -+ goto err; -+ } -+ -+ drm_crtc_init_with_planes(drm, crtc, primary_plane, cursor_plane, -+ &vc4_crtc_funcs, NULL); -+ drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs); -+ primary_plane->crtc = crtc; -+ cursor_plane->crtc = crtc; -+ vc4->crtc[drm_crtc_index(crtc)] = vc4_crtc; -+ -+ vc4_encoder = devm_kzalloc(dev, sizeof(*vc4_encoder), GFP_KERNEL); -+ if (!vc4_encoder) -+ return -ENOMEM; -+ vc4_crtc->encoder = &vc4_encoder->base; -+ vc4_encoder->base.possible_crtcs |= drm_crtc_mask(crtc) ; -+ drm_encoder_init(drm, &vc4_encoder->base, &vc4_fkms_encoder_funcs, -+ DRM_MODE_ENCODER_TMDS, NULL); -+ drm_encoder_helper_add(&vc4_encoder->base, -+ &vc4_fkms_encoder_helper_funcs); -+ -+ vc4_crtc->connector = vc4_fkms_connector_init(drm, &vc4_encoder->base); -+ if (IS_ERR(vc4_crtc->connector)) { -+ ret = PTR_ERR(vc4_crtc->connector); -+ goto err_destroy_encoder; -+ } -+ -+ writel(0, vc4_crtc->regs + SMICS); -+ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), -+ vc4_crtc_irq_handler, 0, "vc4 firmware kms", -+ vc4_crtc); -+ if (ret) -+ goto err_destroy_connector; -+ -+ platform_set_drvdata(pdev, vc4_crtc); -+ -+ return 0; -+ -+err_destroy_connector: -+ vc4_fkms_connector_destroy(vc4_crtc->connector); -+err_destroy_encoder: -+ vc4_fkms_encoder_destroy(vc4_crtc->encoder); -+ list_for_each_entry_safe(destroy_plane, temp, -+ &drm->mode_config.plane_list, head) { -+ if (destroy_plane->possible_crtcs == 1 << drm_crtc_index(crtc)) -+ destroy_plane->funcs->destroy(destroy_plane); -+ } -+err: -+ return ret; -+} -+ -+static void vc4_fkms_unbind(struct device *dev, struct device *master, -+ void *data) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ struct vc4_crtc *vc4_crtc = dev_get_drvdata(dev); -+ -+ vc4_fkms_connector_destroy(vc4_crtc->connector); -+ vc4_fkms_encoder_destroy(vc4_crtc->encoder); -+ drm_crtc_cleanup(&vc4_crtc->base); -+ -+ platform_set_drvdata(pdev, NULL); -+} -+ -+static const struct component_ops vc4_fkms_ops = { -+ .bind = vc4_fkms_bind, -+ .unbind = vc4_fkms_unbind, -+}; -+ -+static int vc4_fkms_probe(struct platform_device *pdev) -+{ -+ return component_add(&pdev->dev, &vc4_fkms_ops); -+} -+ -+static int vc4_fkms_remove(struct platform_device *pdev) -+{ -+ component_del(&pdev->dev, &vc4_fkms_ops); -+ return 0; -+} -+ -+struct platform_driver vc4_firmware_kms_driver = { -+ .probe = vc4_fkms_probe, -+ .remove = vc4_fkms_remove, -+ .driver = { -+ .name = "vc4_firmware_kms", -+ .of_match_table = vc4_firmware_kms_dt_match, -+ }, -+}; diff --git a/target/linux/brcm2708/patches-4.9/0106-i2c-bcm2835-Fix-hang-for-writing-messages-larger-tha.patch b/target/linux/brcm2708/patches-4.9/0106-i2c-bcm2835-Fix-hang-for-writing-messages-larger-tha.patch deleted file mode 100644 index 899c75e0dbe2..000000000000 --- a/target/linux/brcm2708/patches-4.9/0106-i2c-bcm2835-Fix-hang-for-writing-messages-larger-tha.patch +++ /dev/null @@ -1,90 +0,0 @@ -From 89b466914a0d49f08d00be25556ba22497b9a284 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= -Date: Sat, 17 Sep 2016 15:07:10 +0200 -Subject: [PATCH] i2c: bcm2835: Fix hang for writing messages larger than 16 - bytes -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Writing messages larger than the FIFO size results in a hang, rendering -the machine unusable. This is because the RXD status flag is set on the -first interrupt which results in bcm2835_drain_rxfifo() stealing bytes -from the buffer. The controller continues to trigger interrupts waiting -for the missing bytes, but bcm2835_fill_txfifo() has none to give. -In this situation wait_for_completion_timeout() apparently is unable to -stop the madness. - -The BCM2835 ARM Peripherals datasheet has this to say about the flags: - TXD: is set when the FIFO has space for at least one byte of data. - RXD: is set when the FIFO contains at least one byte of data. - TXW: is set during a write transfer and the FIFO is less than full. - RXR: is set during a read transfer and the FIFO is or more full. - -Implementing the logic from the downstream i2c-bcm2708 driver solved -the hang problem. - -Signed-off-by: Noralf Trønnes -Reviewed-by: Eric Anholt -Reviewed-by: Martin Sperl ---- - drivers/i2c/busses/i2c-bcm2835.c | 22 ++++++++++++++-------- - 1 file changed, 14 insertions(+), 8 deletions(-) - ---- a/drivers/i2c/busses/i2c-bcm2835.c -+++ b/drivers/i2c/busses/i2c-bcm2835.c -@@ -64,6 +64,7 @@ struct bcm2835_i2c_dev { - int irq; - struct i2c_adapter adapter; - struct completion completion; -+ struct i2c_msg *curr_msg; - u32 msg_err; - u8 *msg_buf; - size_t msg_buf_remaining; -@@ -126,14 +127,13 @@ static irqreturn_t bcm2835_i2c_isr(int t - return IRQ_HANDLED; - } - -- if (val & BCM2835_I2C_S_RXD) { -- bcm2835_drain_rxfifo(i2c_dev); -- if (!(val & BCM2835_I2C_S_DONE)) -- return IRQ_HANDLED; -- } -- - if (val & BCM2835_I2C_S_DONE) { -- if (i2c_dev->msg_buf_remaining) -+ if (i2c_dev->curr_msg->flags & I2C_M_RD) { -+ bcm2835_drain_rxfifo(i2c_dev); -+ val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S); -+ } -+ -+ if ((val & BCM2835_I2C_S_RXD) || i2c_dev->msg_buf_remaining) - i2c_dev->msg_err = BCM2835_I2C_S_LEN; - else - i2c_dev->msg_err = 0; -@@ -141,11 +141,16 @@ static irqreturn_t bcm2835_i2c_isr(int t - return IRQ_HANDLED; - } - -- if (val & BCM2835_I2C_S_TXD) { -+ if (val & BCM2835_I2C_S_TXW) { - bcm2835_fill_txfifo(i2c_dev); - return IRQ_HANDLED; - } - -+ if (val & BCM2835_I2C_S_RXR) { -+ bcm2835_drain_rxfifo(i2c_dev); -+ return IRQ_HANDLED; -+ } -+ - return IRQ_NONE; - } - -@@ -155,6 +160,7 @@ static int bcm2835_i2c_xfer_msg(struct b - u32 c; - unsigned long time_left; - -+ i2c_dev->curr_msg = msg; - i2c_dev->msg_buf = msg->buf; - i2c_dev->msg_buf_remaining = msg->len; - reinit_completion(&i2c_dev->completion); diff --git a/target/linux/brcm2708/patches-4.9/0107-i2c-bcm2835-Protect-against-unexpected-TXW-RXR-inter.patch b/target/linux/brcm2708/patches-4.9/0107-i2c-bcm2835-Protect-against-unexpected-TXW-RXR-inter.patch deleted file mode 100644 index 6646d77944e2..000000000000 --- a/target/linux/brcm2708/patches-4.9/0107-i2c-bcm2835-Protect-against-unexpected-TXW-RXR-inter.patch +++ /dev/null @@ -1,124 +0,0 @@ -From 8feb8081c74d15ce368baa42981ca98e77800c03 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= -Date: Fri, 23 Sep 2016 18:24:38 +0200 -Subject: [PATCH] i2c: bcm2835: Protect against unexpected TXW/RXR interrupts -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -If an unexpected TXW or RXR interrupt occurs (msg_buf_remaining == 0), -the driver has no way to fill/drain the FIFO to stop the interrupts. -In this case the controller has to be disabled and the transfer -completed to avoid hang. - -(CLKT | ERR) and DONE interrupts are completed in their own paths, and -the controller is disabled in the transfer function after completion. -Unite the code paths and do disabling inside the interrupt routine. - -Clear interrupt status bits in the united completion path instead of -trying to do it on every interrupt which isn't necessary. -Only CLKT, ERR and DONE can be cleared that way. - -Add the status value to the error value in case of TXW/RXR errors to -distinguish them from the other S_LEN error. - -Signed-off-by: Noralf Trønnes -Reviewed-by: Eric Anholt ---- - drivers/i2c/busses/i2c-bcm2835.c | 40 +++++++++++++++++++++++++++++++--------- - 1 file changed, 31 insertions(+), 9 deletions(-) - ---- a/drivers/i2c/busses/i2c-bcm2835.c -+++ b/drivers/i2c/busses/i2c-bcm2835.c -@@ -50,8 +50,6 @@ - #define BCM2835_I2C_S_CLKT BIT(9) - #define BCM2835_I2C_S_LEN BIT(10) /* Fake bit for SW error reporting */ - --#define BCM2835_I2C_BITMSK_S 0x03FF -- - #define BCM2835_I2C_CDIV_MIN 0x0002 - #define BCM2835_I2C_CDIV_MAX 0xFFFE - -@@ -111,20 +109,26 @@ static void bcm2835_drain_rxfifo(struct - } - } - -+/* -+ * Note about I2C_C_CLEAR on error: -+ * The I2C_C_CLEAR on errors will take some time to resolve -- if you were in -+ * non-idle state and I2C_C_READ, it sets an abort_rx flag and runs through -+ * the state machine to send a NACK and a STOP. Since we're setting CLEAR -+ * without I2CEN, that NACK will be hanging around queued up for next time -+ * we start the engine. -+ */ -+ - static irqreturn_t bcm2835_i2c_isr(int this_irq, void *data) - { - struct bcm2835_i2c_dev *i2c_dev = data; - u32 val, err; - - val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S); -- val &= BCM2835_I2C_BITMSK_S; -- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_S, val); - - err = val & (BCM2835_I2C_S_CLKT | BCM2835_I2C_S_ERR); - if (err) { - i2c_dev->msg_err = err; -- complete(&i2c_dev->completion); -- return IRQ_HANDLED; -+ goto complete; - } - - if (val & BCM2835_I2C_S_DONE) { -@@ -137,21 +141,38 @@ static irqreturn_t bcm2835_i2c_isr(int t - i2c_dev->msg_err = BCM2835_I2C_S_LEN; - else - i2c_dev->msg_err = 0; -- complete(&i2c_dev->completion); -- return IRQ_HANDLED; -+ goto complete; - } - - if (val & BCM2835_I2C_S_TXW) { -+ if (!i2c_dev->msg_buf_remaining) { -+ i2c_dev->msg_err = val | BCM2835_I2C_S_LEN; -+ goto complete; -+ } -+ - bcm2835_fill_txfifo(i2c_dev); - return IRQ_HANDLED; - } - - if (val & BCM2835_I2C_S_RXR) { -+ if (!i2c_dev->msg_buf_remaining) { -+ i2c_dev->msg_err = val | BCM2835_I2C_S_LEN; -+ goto complete; -+ } -+ - bcm2835_drain_rxfifo(i2c_dev); - return IRQ_HANDLED; - } - - return IRQ_NONE; -+ -+complete: -+ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR); -+ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_S, BCM2835_I2C_S_CLKT | -+ BCM2835_I2C_S_ERR | BCM2835_I2C_S_DONE); -+ complete(&i2c_dev->completion); -+ -+ return IRQ_HANDLED; - } - - static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev, -@@ -181,8 +202,9 @@ static int bcm2835_i2c_xfer_msg(struct b - - time_left = wait_for_completion_timeout(&i2c_dev->completion, - BCM2835_I2C_TIMEOUT); -- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR); - if (!time_left) { -+ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, -+ BCM2835_I2C_C_CLEAR); - dev_err(i2c_dev->dev, "i2c transfer timed out\n"); - return -ETIMEDOUT; - } diff --git a/target/linux/brcm2708/patches-4.9/0108-i2c-bcm2835-Use-dev_dbg-logging-on-transfer-errors.patch b/target/linux/brcm2708/patches-4.9/0108-i2c-bcm2835-Use-dev_dbg-logging-on-transfer-errors.patch deleted file mode 100644 index acc2ade0a354..000000000000 --- a/target/linux/brcm2708/patches-4.9/0108-i2c-bcm2835-Use-dev_dbg-logging-on-transfer-errors.patch +++ /dev/null @@ -1,32 +0,0 @@ -From bff25210b88dc7b71ee9c2626e42a939072dec64 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= -Date: Mon, 19 Sep 2016 17:19:41 +0200 -Subject: [PATCH] i2c: bcm2835: Use dev_dbg logging on transfer errors -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Writing to an AT24C32 generates on average 2x i2c transfer errors per -32-byte page write. Which amounts to a lot for a 4k write. This is due -to the fact that the chip doesn't respond during it's internal write -cycle when the at24 driver tries and retries the next write. -Only a handful drivers use dev_err() on transfer error, so switch to -dev_dbg() instead. - -Signed-off-by: Noralf Trønnes -Reviewed-by: Eric Anholt ---- - drivers/i2c/busses/i2c-bcm2835.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/i2c/busses/i2c-bcm2835.c -+++ b/drivers/i2c/busses/i2c-bcm2835.c -@@ -216,7 +216,7 @@ static int bcm2835_i2c_xfer_msg(struct b - (msg->flags & I2C_M_IGNORE_NAK)) - return 0; - -- dev_err(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err); -+ dev_dbg(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err); - - if (i2c_dev->msg_err & BCM2835_I2C_S_ERR) - return -EREMOTEIO; diff --git a/target/linux/brcm2708/patches-4.9/0109-i2c-bcm2835-Can-t-support-I2C_M_IGNORE_NAK.patch b/target/linux/brcm2708/patches-4.9/0109-i2c-bcm2835-Can-t-support-I2C_M_IGNORE_NAK.patch deleted file mode 100644 index a913c50082b2..000000000000 --- a/target/linux/brcm2708/patches-4.9/0109-i2c-bcm2835-Can-t-support-I2C_M_IGNORE_NAK.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 40c63177d4c0f4755a148503c3b8bb2192ce8c0e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= -Date: Thu, 22 Sep 2016 22:05:50 +0200 -Subject: [PATCH] i2c: bcm2835: Can't support I2C_M_IGNORE_NAK -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The controller can't support this flag, so remove it. - -Documentation/i2c/i2c-protocol states that all of the message is sent: - -I2C_M_IGNORE_NAK: - Normally message is interrupted immediately if there is [NA] from the - client. Setting this flag treats any [NA] as [A], and all of - message is sent. - -From the BCM2835 ARM Peripherals datasheet: - - The ERR field is set when the slave fails to acknowledge either - its address or a data byte written to it. - -So when the controller doesn't receive an ack, it sets ERR and raises -an interrupt. In other words, the whole message is not sent. - -Signed-off-by: Noralf Trønnes -Reviewed-by: Eric Anholt ---- - drivers/i2c/busses/i2c-bcm2835.c | 4 ---- - 1 file changed, 4 deletions(-) - ---- a/drivers/i2c/busses/i2c-bcm2835.c -+++ b/drivers/i2c/busses/i2c-bcm2835.c -@@ -212,10 +212,6 @@ static int bcm2835_i2c_xfer_msg(struct b - if (likely(!i2c_dev->msg_err)) - return 0; - -- if ((i2c_dev->msg_err & BCM2835_I2C_S_ERR) && -- (msg->flags & I2C_M_IGNORE_NAK)) -- return 0; -- - dev_dbg(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err); - - if (i2c_dev->msg_err & BCM2835_I2C_S_ERR) diff --git a/target/linux/brcm2708/patches-4.9/0110-i2c-bcm2835-Add-support-for-Repeated-Start-Condition.patch b/target/linux/brcm2708/patches-4.9/0110-i2c-bcm2835-Add-support-for-Repeated-Start-Condition.patch deleted file mode 100644 index 0cd5aa469341..000000000000 --- a/target/linux/brcm2708/patches-4.9/0110-i2c-bcm2835-Add-support-for-Repeated-Start-Condition.patch +++ /dev/null @@ -1,181 +0,0 @@ -From db656eb11aebb0d7e4b833f9b452503ddb1351f1 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= -Date: Fri, 23 Sep 2016 04:54:27 +0200 -Subject: [PATCH] i2c: bcm2835: Add support for Repeated Start Condition -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Documentation/i2c/i2c-protocol states that Combined transactions should -separate messages with a Start bit and end the whole transaction with a -Stop bit. This patch adds support for issuing only a Start between -messages instead of a Stop followed by a Start. - -This implementation differs from downstream i2c-bcm2708 in 2 respects: -- it uses an interrupt to detect that the transfer is active instead - of using polling. There is no interrupt for Transfer Active, but by - not prefilling the FIFO it's possible to use the TXW interrupt. -- when resetting/disabling the controller between transfers it writes - CLEAR to the control register instead of just zero. - Using just zero gave many errors. This might be the reason why - downstream had to disable this feature and make it available with a - module parameter. - -I have run thousands of transfers to a DS1307 (rtc), MMA8451 (accel) -and AT24C32 (eeprom) in parallel without problems. - -Signed-off-by: Noralf Trønnes -Acked-by: Eric Anholt ---- - drivers/i2c/busses/i2c-bcm2835.c | 101 ++++++++++++++++++++++++--------------- - 1 file changed, 63 insertions(+), 38 deletions(-) - ---- a/drivers/i2c/busses/i2c-bcm2835.c -+++ b/drivers/i2c/busses/i2c-bcm2835.c -@@ -63,6 +63,7 @@ struct bcm2835_i2c_dev { - struct i2c_adapter adapter; - struct completion completion; - struct i2c_msg *curr_msg; -+ int num_msgs; - u32 msg_err; - u8 *msg_buf; - size_t msg_buf_remaining; -@@ -110,6 +111,45 @@ static void bcm2835_drain_rxfifo(struct - } - - /* -+ * Repeated Start Condition (Sr) -+ * The BCM2835 ARM Peripherals datasheet mentions a way to trigger a Sr when it -+ * talks about reading from a slave with 10 bit address. This is achieved by -+ * issuing a write, poll the I2CS.TA flag and wait for it to be set, and then -+ * issue a read. -+ * A comment in https://github.com/raspberrypi/linux/issues/254 shows how the -+ * firmware actually does it using polling and says that it's a workaround for -+ * a problem in the state machine. -+ * It turns out that it is possible to use the TXW interrupt to know when the -+ * transfer is active, provided the FIFO has not been prefilled. -+ */ -+ -+static void bcm2835_i2c_start_transfer(struct bcm2835_i2c_dev *i2c_dev) -+{ -+ u32 c = BCM2835_I2C_C_ST | BCM2835_I2C_C_I2CEN; -+ struct i2c_msg *msg = i2c_dev->curr_msg; -+ bool last_msg = (i2c_dev->num_msgs == 1); -+ -+ if (!i2c_dev->num_msgs) -+ return; -+ -+ i2c_dev->num_msgs--; -+ i2c_dev->msg_buf = msg->buf; -+ i2c_dev->msg_buf_remaining = msg->len; -+ -+ if (msg->flags & I2C_M_RD) -+ c |= BCM2835_I2C_C_READ | BCM2835_I2C_C_INTR; -+ else -+ c |= BCM2835_I2C_C_INTT; -+ -+ if (last_msg) -+ c |= BCM2835_I2C_C_INTD; -+ -+ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_A, msg->addr); -+ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DLEN, msg->len); -+ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c); -+} -+ -+/* - * Note about I2C_C_CLEAR on error: - * The I2C_C_CLEAR on errors will take some time to resolve -- if you were in - * non-idle state and I2C_C_READ, it sets an abort_rx flag and runs through -@@ -151,6 +191,12 @@ static irqreturn_t bcm2835_i2c_isr(int t - } - - bcm2835_fill_txfifo(i2c_dev); -+ -+ if (i2c_dev->num_msgs && !i2c_dev->msg_buf_remaining) { -+ i2c_dev->curr_msg++; -+ bcm2835_i2c_start_transfer(i2c_dev); -+ } -+ - return IRQ_HANDLED; - } - -@@ -175,30 +221,25 @@ complete: - return IRQ_HANDLED; - } - --static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev, -- struct i2c_msg *msg) -+static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], -+ int num) - { -- u32 c; -+ struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap); - unsigned long time_left; -+ int i; - -- i2c_dev->curr_msg = msg; -- i2c_dev->msg_buf = msg->buf; -- i2c_dev->msg_buf_remaining = msg->len; -- reinit_completion(&i2c_dev->completion); -- -- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR); -+ for (i = 0; i < (num - 1); i++) -+ if (msgs[i].flags & I2C_M_RD) { -+ dev_warn_once(i2c_dev->dev, -+ "only one read message supported, has to be last\n"); -+ return -EOPNOTSUPP; -+ } - -- if (msg->flags & I2C_M_RD) { -- c = BCM2835_I2C_C_READ | BCM2835_I2C_C_INTR; -- } else { -- c = BCM2835_I2C_C_INTT; -- bcm2835_fill_txfifo(i2c_dev); -- } -- c |= BCM2835_I2C_C_ST | BCM2835_I2C_C_INTD | BCM2835_I2C_C_I2CEN; -+ i2c_dev->curr_msg = msgs; -+ i2c_dev->num_msgs = num; -+ reinit_completion(&i2c_dev->completion); - -- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_A, msg->addr); -- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DLEN, msg->len); -- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c); -+ bcm2835_i2c_start_transfer(i2c_dev); - - time_left = wait_for_completion_timeout(&i2c_dev->completion, - BCM2835_I2C_TIMEOUT); -@@ -209,31 +250,15 @@ static int bcm2835_i2c_xfer_msg(struct b - return -ETIMEDOUT; - } - -- if (likely(!i2c_dev->msg_err)) -- return 0; -+ if (!i2c_dev->msg_err) -+ return num; - - dev_dbg(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err); - - if (i2c_dev->msg_err & BCM2835_I2C_S_ERR) - return -EREMOTEIO; -- else -- return -EIO; --} -- --static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], -- int num) --{ -- struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap); -- int i; -- int ret = 0; -- -- for (i = 0; i < num; i++) { -- ret = bcm2835_i2c_xfer_msg(i2c_dev, &msgs[i]); -- if (ret) -- break; -- } - -- return ret ?: i; -+ return -EIO; - } - - static u32 bcm2835_i2c_func(struct i2c_adapter *adap) diff --git a/target/linux/brcm2708/patches-4.9/0111-i2c-bcm2835-Support-i2c-dev-ioctl-I2C_TIMEOUT.patch b/target/linux/brcm2708/patches-4.9/0111-i2c-bcm2835-Support-i2c-dev-ioctl-I2C_TIMEOUT.patch deleted file mode 100644 index 07016d978220..000000000000 --- a/target/linux/brcm2708/patches-4.9/0111-i2c-bcm2835-Support-i2c-dev-ioctl-I2C_TIMEOUT.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 0c2744e901150b27a60bded1acb058ce26709d5a Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= -Date: Fri, 23 Sep 2016 04:57:17 +0200 -Subject: [PATCH] i2c: bcm2835: Support i2c-dev ioctl I2C_TIMEOUT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Use i2c_adapter->timeout for the completion timeout value. The core -default is 1 second. - -Signed-off-by: Noralf Trønnes -Reviewed-by: Eric Anholt ---- - drivers/i2c/busses/i2c-bcm2835.c | 4 +--- - 1 file changed, 1 insertion(+), 3 deletions(-) - ---- a/drivers/i2c/busses/i2c-bcm2835.c -+++ b/drivers/i2c/busses/i2c-bcm2835.c -@@ -53,8 +53,6 @@ - #define BCM2835_I2C_CDIV_MIN 0x0002 - #define BCM2835_I2C_CDIV_MAX 0xFFFE - --#define BCM2835_I2C_TIMEOUT (msecs_to_jiffies(1000)) -- - struct bcm2835_i2c_dev { - struct device *dev; - void __iomem *regs; -@@ -242,7 +240,7 @@ static int bcm2835_i2c_xfer(struct i2c_a - bcm2835_i2c_start_transfer(i2c_dev); - - time_left = wait_for_completion_timeout(&i2c_dev->completion, -- BCM2835_I2C_TIMEOUT); -+ adap->timeout); - if (!time_left) { - bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, - BCM2835_I2C_C_CLEAR); diff --git a/target/linux/brcm2708/patches-4.9/0112-i2c-bcm2835-Add-support-for-dynamic-clock.patch b/target/linux/brcm2708/patches-4.9/0112-i2c-bcm2835-Add-support-for-dynamic-clock.patch deleted file mode 100644 index afe2b2297c64..000000000000 --- a/target/linux/brcm2708/patches-4.9/0112-i2c-bcm2835-Add-support-for-dynamic-clock.patch +++ /dev/null @@ -1,117 +0,0 @@ -From ce8663f1f101f8c7b9037c31269b0b31373737ad Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= -Date: Tue, 27 Sep 2016 01:00:08 +0200 -Subject: [PATCH] i2c: bcm2835: Add support for dynamic clock -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Support a dynamic clock by reading the frequency and setting the -divisor in the transfer function instead of during probe. - -Signed-off-by: Noralf Trønnes -Reviewed-by: Martin Sperl ---- - drivers/i2c/busses/i2c-bcm2835.c | 51 +++++++++++++++++++++++++--------------- - 1 file changed, 32 insertions(+), 19 deletions(-) - ---- a/drivers/i2c/busses/i2c-bcm2835.c -+++ b/drivers/i2c/busses/i2c-bcm2835.c -@@ -58,6 +58,7 @@ struct bcm2835_i2c_dev { - void __iomem *regs; - struct clk *clk; - int irq; -+ u32 bus_clk_rate; - struct i2c_adapter adapter; - struct completion completion; - struct i2c_msg *curr_msg; -@@ -78,6 +79,30 @@ static inline u32 bcm2835_i2c_readl(stru - return readl(i2c_dev->regs + reg); - } - -+static int bcm2835_i2c_set_divider(struct bcm2835_i2c_dev *i2c_dev) -+{ -+ u32 divider; -+ -+ divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk), -+ i2c_dev->bus_clk_rate); -+ /* -+ * Per the datasheet, the register is always interpreted as an even -+ * number, by rounding down. In other words, the LSB is ignored. So, -+ * if the LSB is set, increment the divider to avoid any issue. -+ */ -+ if (divider & 1) -+ divider++; -+ if ((divider < BCM2835_I2C_CDIV_MIN) || -+ (divider > BCM2835_I2C_CDIV_MAX)) { -+ dev_err_ratelimited(i2c_dev->dev, "Invalid clock-frequency\n"); -+ return -EINVAL; -+ } -+ -+ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider); -+ -+ return 0; -+} -+ - static void bcm2835_fill_txfifo(struct bcm2835_i2c_dev *i2c_dev) - { - u32 val; -@@ -224,7 +249,7 @@ static int bcm2835_i2c_xfer(struct i2c_a - { - struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap); - unsigned long time_left; -- int i; -+ int i, ret; - - for (i = 0; i < (num - 1); i++) - if (msgs[i].flags & I2C_M_RD) { -@@ -233,6 +258,10 @@ static int bcm2835_i2c_xfer(struct i2c_a - return -EOPNOTSUPP; - } - -+ ret = bcm2835_i2c_set_divider(i2c_dev); -+ if (ret) -+ return ret; -+ - i2c_dev->curr_msg = msgs; - i2c_dev->num_msgs = num; - reinit_completion(&i2c_dev->completion); -@@ -282,7 +311,6 @@ static int bcm2835_i2c_probe(struct plat - { - struct bcm2835_i2c_dev *i2c_dev; - struct resource *mem, *irq; -- u32 bus_clk_rate, divider; - int ret; - struct i2c_adapter *adap; - -@@ -306,28 +334,13 @@ static int bcm2835_i2c_probe(struct plat - } - - ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", -- &bus_clk_rate); -+ &i2c_dev->bus_clk_rate); - if (ret < 0) { - dev_warn(&pdev->dev, - "Could not read clock-frequency property\n"); -- bus_clk_rate = 100000; -+ i2c_dev->bus_clk_rate = 100000; - } - -- divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk), bus_clk_rate); -- /* -- * Per the datasheet, the register is always interpreted as an even -- * number, by rounding down. In other words, the LSB is ignored. So, -- * if the LSB is set, increment the divider to avoid any issue. -- */ -- if (divider & 1) -- divider++; -- if ((divider < BCM2835_I2C_CDIV_MIN) || -- (divider > BCM2835_I2C_CDIV_MAX)) { -- dev_err(&pdev->dev, "Invalid clock-frequency\n"); -- return -ENODEV; -- } -- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider); -- - irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!irq) { - dev_err(&pdev->dev, "No IRQ resource\n"); diff --git a/target/linux/brcm2708/patches-4.9/0113-i2c-bcm2835-Add-debug-support.patch b/target/linux/brcm2708/patches-4.9/0113-i2c-bcm2835-Add-debug-support.patch deleted file mode 100644 index f69a48f623c9..000000000000 --- a/target/linux/brcm2708/patches-4.9/0113-i2c-bcm2835-Add-debug-support.patch +++ /dev/null @@ -1,189 +0,0 @@ -From 98629f09f3ceb7f2a559b48b4a70028485583f5e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= -Date: Tue, 1 Nov 2016 15:15:41 +0100 -Subject: [PATCH] i2c: bcm2835: Add debug support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This adds a debug module parameter to aid in debugging transfer issues -by printing info to the kernel log. When enabled, status values are -collected in the interrupt routine and msg info in -bcm2835_i2c_start_transfer(). This is done in a way that tries to avoid -affecting timing. Having printk in the isr can mask issues. - -debug values (additive): -1: Print info on error -2: Print info on all transfers -3: Print messages before transfer is started - -The value can be changed at runtime: -/sys/module/i2c_bcm2835/parameters/debug - -Example output, debug=3: -[ 747.114448] bcm2835_i2c_xfer: msg(1/2) write addr=0x54, len=2 flags= [i2c1] -[ 747.114463] bcm2835_i2c_xfer: msg(2/2) read addr=0x54, len=32 flags= [i2c1] -[ 747.117809] start_transfer: msg(1/2) write addr=0x54, len=2 flags= [i2c1] -[ 747.117825] isr: remain=2, status=0x30000055 : TA TXW TXD TXE [i2c1] -[ 747.117839] start_transfer: msg(2/2) read addr=0x54, len=32 flags= [i2c1] -[ 747.117849] isr: remain=32, status=0xd0000039 : TA RXR TXD RXD [i2c1] -[ 747.117861] isr: remain=20, status=0xd0000039 : TA RXR TXD RXD [i2c1] -[ 747.117870] isr: remain=8, status=0x32 : DONE TXD RXD [i2c1] - -Signed-off-by: Noralf Trønnes ---- - drivers/i2c/busses/i2c-bcm2835.c | 99 +++++++++++++++++++++++++++++++++++++++- - 1 file changed, 98 insertions(+), 1 deletion(-) - ---- a/drivers/i2c/busses/i2c-bcm2835.c -+++ b/drivers/i2c/busses/i2c-bcm2835.c -@@ -53,6 +53,18 @@ - #define BCM2835_I2C_CDIV_MIN 0x0002 - #define BCM2835_I2C_CDIV_MAX 0xFFFE - -+static unsigned int debug; -+module_param(debug, uint, 0644); -+MODULE_PARM_DESC(debug, "1=err, 2=isr, 3=xfer"); -+ -+#define BCM2835_DEBUG_MAX 512 -+struct bcm2835_debug { -+ struct i2c_msg *msg; -+ int msg_idx; -+ size_t remain; -+ u32 status; -+}; -+ - struct bcm2835_i2c_dev { - struct device *dev; - void __iomem *regs; -@@ -66,8 +78,78 @@ struct bcm2835_i2c_dev { - u32 msg_err; - u8 *msg_buf; - size_t msg_buf_remaining; -+ struct bcm2835_debug debug[BCM2835_DEBUG_MAX]; -+ unsigned int debug_num; -+ unsigned int debug_num_msgs; - }; - -+static inline void bcm2835_debug_add(struct bcm2835_i2c_dev *i2c_dev, u32 s) -+{ -+ if (!i2c_dev->debug_num_msgs || i2c_dev->debug_num >= BCM2835_DEBUG_MAX) -+ return; -+ -+ i2c_dev->debug[i2c_dev->debug_num].msg = i2c_dev->curr_msg; -+ i2c_dev->debug[i2c_dev->debug_num].msg_idx = -+ i2c_dev->debug_num_msgs - i2c_dev->num_msgs; -+ i2c_dev->debug[i2c_dev->debug_num].remain = i2c_dev->msg_buf_remaining; -+ i2c_dev->debug[i2c_dev->debug_num].status = s; -+ i2c_dev->debug_num++; -+} -+ -+static void bcm2835_debug_print_status(struct bcm2835_i2c_dev *i2c_dev, -+ struct bcm2835_debug *d) -+{ -+ u32 s = d->status; -+ -+ pr_info("isr: remain=%zu, status=0x%x : %s%s%s%s%s%s%s%s%s%s [i2c%d]\n", -+ d->remain, s, -+ s & BCM2835_I2C_S_TA ? "TA " : "", -+ s & BCM2835_I2C_S_DONE ? "DONE " : "", -+ s & BCM2835_I2C_S_TXW ? "TXW " : "", -+ s & BCM2835_I2C_S_RXR ? "RXR " : "", -+ s & BCM2835_I2C_S_TXD ? "TXD " : "", -+ s & BCM2835_I2C_S_RXD ? "RXD " : "", -+ s & BCM2835_I2C_S_TXE ? "TXE " : "", -+ s & BCM2835_I2C_S_RXF ? "RXF " : "", -+ s & BCM2835_I2C_S_ERR ? "ERR " : "", -+ s & BCM2835_I2C_S_CLKT ? "CLKT " : "", -+ i2c_dev->adapter.nr); -+} -+ -+static void bcm2835_debug_print_msg(struct bcm2835_i2c_dev *i2c_dev, -+ struct i2c_msg *msg, int i, int total, -+ const char *fname) -+{ -+ pr_info("%s: msg(%d/%d) %s addr=0x%02x, len=%u flags=%s%s%s%s%s%s%s [i2c%d]\n", -+ fname, i, total, -+ msg->flags & I2C_M_RD ? "read" : "write", msg->addr, msg->len, -+ msg->flags & I2C_M_TEN ? "TEN" : "", -+ msg->flags & I2C_M_RECV_LEN ? "RECV_LEN" : "", -+ msg->flags & I2C_M_NO_RD_ACK ? "NO_RD_ACK" : "", -+ msg->flags & I2C_M_IGNORE_NAK ? "IGNORE_NAK" : "", -+ msg->flags & I2C_M_REV_DIR_ADDR ? "REV_DIR_ADDR" : "", -+ msg->flags & I2C_M_NOSTART ? "NOSTART" : "", -+ msg->flags & I2C_M_STOP ? "STOP" : "", -+ i2c_dev->adapter.nr); -+} -+ -+static void bcm2835_debug_print(struct bcm2835_i2c_dev *i2c_dev) -+{ -+ struct bcm2835_debug *d; -+ unsigned int i; -+ -+ for (i = 0; i < i2c_dev->debug_num; i++) { -+ d = &i2c_dev->debug[i]; -+ if (d->status == ~0) -+ bcm2835_debug_print_msg(i2c_dev, d->msg, d->msg_idx, -+ i2c_dev->debug_num_msgs, "start_transfer"); -+ else -+ bcm2835_debug_print_status(i2c_dev, d); -+ } -+ if (i2c_dev->debug_num >= BCM2835_DEBUG_MAX) -+ pr_info("BCM2835_DEBUG_MAX reached\n"); -+} -+ - static inline void bcm2835_i2c_writel(struct bcm2835_i2c_dev *i2c_dev, - u32 reg, u32 val) - { -@@ -170,6 +252,7 @@ static void bcm2835_i2c_start_transfer(s - bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_A, msg->addr); - bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DLEN, msg->len); - bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c); -+ bcm2835_debug_add(i2c_dev, ~0); - } - - /* -@@ -187,6 +270,7 @@ static irqreturn_t bcm2835_i2c_isr(int t - u32 val, err; - - val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S); -+ bcm2835_debug_add(i2c_dev, val); - - err = val & (BCM2835_I2C_S_CLKT | BCM2835_I2C_S_ERR); - if (err) { -@@ -251,6 +335,13 @@ static int bcm2835_i2c_xfer(struct i2c_a - unsigned long time_left; - int i, ret; - -+ if (debug) -+ i2c_dev->debug_num_msgs = num; -+ -+ if (debug > 2) -+ for (i = 0; i < num; i++) -+ bcm2835_debug_print_msg(i2c_dev, &msgs[i], i + 1, num, __func__); -+ - for (i = 0; i < (num - 1); i++) - if (msgs[i].flags & I2C_M_RD) { - dev_warn_once(i2c_dev->dev, -@@ -270,6 +361,10 @@ static int bcm2835_i2c_xfer(struct i2c_a - - time_left = wait_for_completion_timeout(&i2c_dev->completion, - adap->timeout); -+ if (debug > 1 || (debug && (!time_left || i2c_dev->msg_err))) -+ bcm2835_debug_print(i2c_dev); -+ i2c_dev->debug_num_msgs = 0; -+ i2c_dev->debug_num = 0; - if (!time_left) { - bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, - BCM2835_I2C_C_CLEAR); -@@ -280,7 +375,9 @@ static int bcm2835_i2c_xfer(struct i2c_a - if (!i2c_dev->msg_err) - return num; - -- dev_dbg(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err); -+ if (debug) -+ dev_err(i2c_dev->dev, "i2c transfer failed: %x\n", -+ i2c_dev->msg_err); - - if (i2c_dev->msg_err & BCM2835_I2C_S_ERR) - return -EREMOTEIO; diff --git a/target/linux/brcm2708/patches-4.9/0114-arm64-Add-CONFIG_ARCH_BCM2835.patch b/target/linux/brcm2708/patches-4.9/0114-arm64-Add-CONFIG_ARCH_BCM2835.patch deleted file mode 100644 index 34ab47e7b47f..000000000000 --- a/target/linux/brcm2708/patches-4.9/0114-arm64-Add-CONFIG_ARCH_BCM2835.patch +++ /dev/null @@ -1,16 +0,0 @@ -From c3dc479ae9620756f981ad2c5afeee92295f8ea3 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Sat, 31 Dec 2016 14:15:50 +0000 -Subject: [PATCH] arm64: Add CONFIG_ARCH_BCM2835 - ---- - arch/arm64/configs/bcmrpi3_defconfig | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm64/configs/bcmrpi3_defconfig -+++ b/arch/arm64/configs/bcmrpi3_defconfig -@@ -1332,3 +1332,4 @@ CONFIG_ARM64_CRYPTO=y - CONFIG_CRC_ITU_T=y - CONFIG_LIBCRC32C=y - CONFIG_BCM2708_VCHIQ=n -+CONFIG_ARCH_BCM2835=y diff --git a/target/linux/brcm2708/patches-4.9/0115-Add-support-for-Silicon-Labs-Si7013-20-21-humidity-t.patch b/target/linux/brcm2708/patches-4.9/0115-Add-support-for-Silicon-Labs-Si7013-20-21-humidity-t.patch deleted file mode 100644 index 119b05426098..000000000000 --- a/target/linux/brcm2708/patches-4.9/0115-Add-support-for-Silicon-Labs-Si7013-20-21-humidity-t.patch +++ /dev/null @@ -1,77 +0,0 @@ -From 69d0de7d07ec016f2956237ec141bb62ff7ae36c Mon Sep 17 00:00:00 2001 -From: Alex Tucker -Date: Tue, 13 Dec 2016 19:50:18 +0000 -Subject: [PATCH] Add support for Silicon Labs Si7013/20/21 - humidity/temperature sensor. - ---- - arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts | 49 +++++++++++++---------- - 1 file changed, 28 insertions(+), 21 deletions(-) - ---- a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts -@@ -1,34 +1,41 @@ --// Definitions for a few digital barometric pressure and temperature sensors -+// Definitions for I2C based sensors using the Industrial IO interface. - /dts-v1/; - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2708"; - -- fragment@0 { -- target = <&i2c_arm>; -- __overlay__ { -- #address-cells = <1>; -- #size-cells = <0>; -- status = "okay"; -- -- bmp085: bmp085@77 { -- compatible = "bosch,bmp085"; -- reg = <0x77>; -- default-oversampling = <3>; -- status = "disable"; -- }; -- -- bmp280: bmp280@76 { -- compatible = "bosch,bmp280"; -- reg = <0x76>; -- status = "disable"; -- }; -- }; -- }; -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ bmp085: bmp085@77 { -+ compatible = "bosch,bmp085"; -+ reg = <0x77>; -+ default-oversampling = <3>; -+ status = "disable"; -+ }; -+ -+ bmp280: bmp280@76 { -+ compatible = "bosch,bmp280"; -+ reg = <0x76>; -+ status = "disable"; -+ }; -+ -+ si7020: si7020@40 { -+ compatible = "si7020"; -+ reg = <0x40>; -+ status = "disable"; -+ }; -+ }; -+ }; - - __overrides__ { - bmp085 = <&bmp085>,"status"; - bmp280 = <&bmp280>,"status"; -+ si7020 = <&si7020>,"status"; - }; - }; diff --git a/target/linux/brcm2708/patches-4.9/0116-Document-the-si7020-option.patch b/target/linux/brcm2708/patches-4.9/0116-Document-the-si7020-option.patch deleted file mode 100644 index 0319ca43a272..000000000000 --- a/target/linux/brcm2708/patches-4.9/0116-Document-the-si7020-option.patch +++ /dev/null @@ -1,21 +0,0 @@ -From ed753b7389b8c65af0b4266c001ef0343fb1c30e Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 3 Jan 2017 21:27:46 +0000 -Subject: [PATCH] Document the si7020 option - ---- - arch/arm/boot/dts/overlays/README | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -549,6 +549,9 @@ Params: bmp085 Select t - - bmp280 Select the Bosch sensortronic BMP280 - -+ si7020 Select the Silicon Labs Si7013/20/21 humidity/ -+ temperature sensor -+ - - Name: i2c0-bcm2708 - Info: Enable the i2c_bcm2708 driver for the i2c0 bus. Not all pin combinations diff --git a/target/linux/brcm2708/patches-4.9/0117-pisound-improvements.patch b/target/linux/brcm2708/patches-4.9/0117-pisound-improvements.patch deleted file mode 100644 index f914bfc3ade9..000000000000 --- a/target/linux/brcm2708/patches-4.9/0117-pisound-improvements.patch +++ /dev/null @@ -1,294 +0,0 @@ -From 8ed8e29b19dba95a7a6c2364c2bb32d926601713 Mon Sep 17 00:00:00 2001 -From: Giedrius Trainavicius -Date: Thu, 5 Jan 2017 02:38:16 +0200 -Subject: [PATCH] pisound improvements: - -* Added a writable sysfs object to enable scripts / user space software -to blink MIDI activity LEDs for variable duration. -* Improved hw_param constraints setting. -* Added compatibility with S16_LE sample format. -* Exposed some simple placeholder volume controls, so the card appears -in volumealsa widget. - -Signed-off-by: Giedrius Trainavicius ---- - sound/soc/bcm/pisound.c | 175 ++++++++++++++++++++++++++++++++++++++++++------ - 1 file changed, 154 insertions(+), 21 deletions(-) - ---- a/sound/soc/bcm/pisound.c -+++ b/sound/soc/bcm/pisound.c -@@ -36,6 +36,7 @@ - #include - #include - #include -+#include - - static int pisnd_spi_init(struct device *dev); - static void pisnd_spi_uninit(void); -@@ -214,6 +215,9 @@ static char g_serial_num[11]; - static char g_id[25]; - static char g_version[5]; - -+static uint8_t g_ledFlashDuration; -+static bool g_ledFlashDurationChanged; -+ - DEFINE_KFIFO(spi_fifo_in, uint8_t, FIFO_SIZE); - DEFINE_KFIFO(spi_fifo_out, uint8_t, FIFO_SIZE); - -@@ -396,8 +400,13 @@ static void pisnd_work_handler(struct wo - val = 0; - tx = 0; - -- if (kfifo_get(&spi_fifo_out, &val)) -+ if (g_ledFlashDurationChanged) { -+ tx = 0xf000 | g_ledFlashDuration; -+ g_ledFlashDuration = 0; -+ g_ledFlashDurationChanged = false; -+ } else if (kfifo_get(&spi_fifo_out, &val)) { - tx = 0x0f00 | val; -+ } - - rx = spi_transfer16(tx); - -@@ -410,6 +419,7 @@ static void pisnd_work_handler(struct wo - } while (rx != 0 - || !kfifo_is_empty(&spi_fifo_out) - || pisnd_spi_has_more() -+ || g_ledFlashDurationChanged - ); - - if (!kfifo_is_empty(&spi_fifo_in) && g_recvCallback) -@@ -569,7 +579,7 @@ static int pisnd_spi_init(struct device - } - - /* Flash the LEDs. */ -- spi_transfer16(0xf000); -+ spi_transfer16(0xf008); - - ret = pisnd_spi_gpio_irq_init(dev); - if (ret < 0) { -@@ -610,6 +620,14 @@ static void pisnd_spi_uninit(void) - pisnd_spi_gpio_uninit(); - } - -+static void pisnd_spi_flash_leds(uint8_t duration) -+{ -+ g_ledFlashDuration = duration; -+ g_ledFlashDurationChanged = true; -+ printd("schedule from spi_flash_leds\n"); -+ pisnd_schedule_process(TASK_PROCESS); -+} -+ - static void pisnd_spi_send(uint8_t val) - { - kfifo_put(&spi_fifo_out, val); -@@ -658,6 +676,83 @@ static const struct of_device_id pisound - {}, - }; - -+enum { -+ SWITCH = 0, -+ VOLUME = 1, -+}; -+ -+static int pisnd_ctl_info(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_info *uinfo) -+{ -+ if (kcontrol->private_value == SWITCH) { -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; -+ uinfo->count = 1; -+ uinfo->value.integer.min = 0; -+ uinfo->value.integer.max = 1; -+ return 0; -+ } else if (kcontrol->private_value == VOLUME) { -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; -+ uinfo->count = 1; -+ uinfo->value.integer.min = 0; -+ uinfo->value.integer.max = 100; -+ return 0; -+ } -+ return -EINVAL; -+} -+ -+static int pisnd_ctl_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ if (kcontrol->private_value == SWITCH) { -+ ucontrol->value.integer.value[0] = 1; -+ return 0; -+ } else if (kcontrol->private_value == VOLUME) { -+ ucontrol->value.integer.value[0] = 100; -+ return 0; -+ } -+ -+ return -EINVAL; -+} -+ -+static struct snd_kcontrol_new pisnd_ctl[] = { -+ { -+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, -+ .name = "PCM Playback Switch", -+ .index = 0, -+ .private_value = SWITCH, -+ .access = SNDRV_CTL_ELEM_ACCESS_READ, -+ .info = pisnd_ctl_info, -+ .get = pisnd_ctl_get, -+ }, -+ { -+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, -+ .name = "PCM Playback Volume", -+ .index = 0, -+ .private_value = VOLUME, -+ .access = SNDRV_CTL_ELEM_ACCESS_READ, -+ .info = pisnd_ctl_info, -+ .get = pisnd_ctl_get, -+ }, -+}; -+ -+static int pisnd_ctl_init(struct snd_card *card) -+{ -+ int err, i; -+ -+ for (i = 0; i < ARRAY_SIZE(pisnd_ctl); ++i) { -+ err = snd_ctl_add(card, snd_ctl_new1(&pisnd_ctl[i], NULL)); -+ if (err < 0) -+ return err; -+ } -+ -+ return 0; -+} -+ -+static int pisnd_ctl_uninit(void) -+{ -+ return 0; -+} -+ - static struct gpio_desc *osr0, *osr1, *osr2; - static struct gpio_desc *reset; - static struct gpio_desc *button; -@@ -667,6 +762,14 @@ static int pisnd_hw_params( - struct snd_pcm_hw_params *params - ) - { -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ -+ /* pisound runs on fixed 32 clock counts per channel, -+ * as generated by the master ADC. -+ */ -+ snd_soc_dai_set_bclk_ratio(cpu_dai, 32*2); -+ - printd("rate = %d\n", params_rate(params)); - printd("ch = %d\n", params_channels(params)); - printd("bits = %u\n", -@@ -711,16 +814,6 @@ static struct snd_pcm_hw_constraint_list - .mask = 0, - }; - --static unsigned int sample_bits[] = { -- 24, 32 --}; -- --static struct snd_pcm_hw_constraint_list constraints_sample_bits = { -- .count = ARRAY_SIZE(sample_bits), -- .list = sample_bits, -- .mask = 0, --}; -- - static int pisnd_startup(struct snd_pcm_substream *substream) - { - int err = snd_pcm_hw_constraint_list( -@@ -733,11 +826,21 @@ static int pisnd_startup(struct snd_pcm_ - if (err < 0) - return err; - -- err = snd_pcm_hw_constraint_list( -+ err = snd_pcm_hw_constraint_single( - substream->runtime, -- 0, -- SNDRV_PCM_HW_PARAM_SAMPLE_BITS, -- &constraints_sample_bits -+ SNDRV_PCM_HW_PARAM_CHANNELS, -+ 2 -+ ); -+ -+ if (err < 0) -+ return err; -+ -+ err = snd_pcm_hw_constraint_mask64( -+ substream->runtime, -+ SNDRV_PCM_HW_PARAM_FORMAT, -+ SNDRV_PCM_FMTBIT_S16_LE | -+ SNDRV_PCM_FMTBIT_S24_LE | -+ SNDRV_PCM_FMTBIT_S32_LE - ); - - if (err < 0) -@@ -771,14 +874,23 @@ static int pisnd_card_probe(struct snd_s - { - int err = pisnd_midi_init(card->snd_card); - -- if (err < 0) -+ if (err < 0) { - printe("pisnd_midi_init failed: %d\n", err); -+ return err; -+ } - -- return err; -+ err = pisnd_ctl_init(card->snd_card); -+ if (err < 0) { -+ printe("pisnd_ctl_init failed: %d\n", err); -+ return err; -+ } -+ -+ return 0; - } - - static int pisnd_card_remove(struct snd_soc_card *card) - { -+ pisnd_ctl_uninit(); - pisnd_midi_uninit(); - return 0; - } -@@ -870,17 +982,38 @@ static ssize_t pisnd_version_show( - return sprintf(buf, "%s\n", pisnd_spi_get_version()); - } - -+static ssize_t pisnd_led_store( -+ struct kobject *kobj, -+ struct kobj_attribute *attr, -+ const char *buf, -+ size_t length -+ ) -+{ -+ uint32_t timeout; -+ int err; -+ -+ err = kstrtou32(buf, 10, &timeout); -+ -+ if (err == 0 && timeout <= 255) -+ pisnd_spi_flash_leds(timeout); -+ -+ return length; -+} -+ - static struct kobj_attribute pisnd_serial_attribute = -- __ATTR(serial, 0644, pisnd_serial_show, NULL); -+ __ATTR(serial, 0444, pisnd_serial_show, NULL); - static struct kobj_attribute pisnd_id_attribute = -- __ATTR(id, 0644, pisnd_id_show, NULL); -+ __ATTR(id, 0444, pisnd_id_show, NULL); - static struct kobj_attribute pisnd_version_attribute = -- __ATTR(version, 0644, pisnd_version_show, NULL); -+ __ATTR(version, 0444, pisnd_version_show, NULL); -+static struct kobj_attribute pisnd_led_attribute = -+ __ATTR(led, 0644, NULL, pisnd_led_store); - - static struct attribute *attrs[] = { - &pisnd_serial_attribute.attr, - &pisnd_id_attribute.attr, - &pisnd_version_attribute.attr, -+ &pisnd_led_attribute.attr, - NULL - }; - diff --git a/target/linux/brcm2708/patches-4.9/0118-Add-driver_name-property.patch b/target/linux/brcm2708/patches-4.9/0118-Add-driver_name-property.patch deleted file mode 100644 index bfda58aa5a9e..000000000000 --- a/target/linux/brcm2708/patches-4.9/0118-Add-driver_name-property.patch +++ /dev/null @@ -1,20 +0,0 @@ -From 341bc67d361def1f23a96c512ab6bc39f32b3601 Mon Sep 17 00:00:00 2001 -From: Aaron Shaw -Date: Tue, 10 Jan 2017 16:05:41 +0000 -Subject: [PATCH] Add driver_name property - -Add driver name property for use with 5.1 passthrough audio in LibreElec and other Kodi based OSs ---- - sound/soc/bcm/justboom-dac.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/sound/soc/bcm/justboom-dac.c -+++ b/sound/soc/bcm/justboom-dac.c -@@ -98,6 +98,7 @@ static struct snd_soc_dai_link snd_rpi_j - /* audio machine driver */ - static struct snd_soc_card snd_rpi_justboom_dac = { - .name = "snd_rpi_justboom_dac", -+ .driver_name = "JustBoomDac", - .owner = THIS_MODULE, - .dai_link = snd_rpi_justboom_dac_dai, - .num_links = ARRAY_SIZE(snd_rpi_justboom_dac_dai), diff --git a/target/linux/brcm2708/patches-4.9/0119-Add-driver_name-paramater.patch b/target/linux/brcm2708/patches-4.9/0119-Add-driver_name-paramater.patch deleted file mode 100644 index 2a3a6d80612b..000000000000 --- a/target/linux/brcm2708/patches-4.9/0119-Add-driver_name-paramater.patch +++ /dev/null @@ -1,20 +0,0 @@ -From d87b665c7e4c09bf713ef6f45ceb11a8aacbcf5e Mon Sep 17 00:00:00 2001 -From: Aaron Shaw -Date: Tue, 10 Jan 2017 16:11:04 +0000 -Subject: [PATCH] Add driver_name paramater - -Add driver_name parameter for use with 5.1 passthrough audio in LibreElec and other Kodi OSs ---- - sound/soc/bcm/justboom-digi.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/sound/soc/bcm/justboom-digi.c -+++ b/sound/soc/bcm/justboom-digi.c -@@ -154,6 +154,7 @@ static struct snd_soc_dai_link snd_rpi_j - /* audio machine driver */ - static struct snd_soc_card snd_rpi_justboom_digi = { - .name = "snd_rpi_justboom_digi", -+ .driver_name = "JustBoomDigi", - .owner = THIS_MODULE, - .dai_link = snd_rpi_justboom_digi_dai, - .num_links = ARRAY_SIZE(snd_rpi_justboom_digi_dai), diff --git a/target/linux/brcm2708/patches-4.9/0120-BCM270X_DT-Add-pi3-disable-wifi-overlay.patch b/target/linux/brcm2708/patches-4.9/0120-BCM270X_DT-Add-pi3-disable-wifi-overlay.patch deleted file mode 100644 index 4bc80bef0475..000000000000 --- a/target/linux/brcm2708/patches-4.9/0120-BCM270X_DT-Add-pi3-disable-wifi-overlay.patch +++ /dev/null @@ -1,56 +0,0 @@ -From b76839857c9b553f52f8d14cf54a22579b362db9 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 11 Jan 2017 13:01:21 +0000 -Subject: [PATCH] BCM270X_DT: Add pi3-disable-wifi overlay - -pi3-disable-wifi is a minimal overlay to disable the onboard WiFi. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 6 ++++++ - arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts | 13 +++++++++++++ - 3 files changed, 20 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -51,6 +51,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - mz61581.dtbo \ - pi3-act-led.dtbo \ - pi3-disable-bt.dtbo \ -+ pi3-disable-wifi.dtbo \ - pi3-miniuart-bt.dtbo \ - piscreen.dtbo \ - piscreen2r.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -800,6 +800,12 @@ Load: dtoverlay=pi3-disable-bt - Params: - - -+Name: pi3-disable-wifi -+Info: Disable Pi3 onboard WiFi -+Load: dtoverlay=pi3-disable-wifi -+Params: -+ -+ - Name: pi3-miniuart-bt - Info: Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore - UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts -@@ -0,0 +1,13 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&mmc>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.9/0121-ARM64-Make-it-work-again-on-4.9-1790.patch b/target/linux/brcm2708/patches-4.9/0121-ARM64-Make-it-work-again-on-4.9-1790.patch deleted file mode 100644 index 96b298dd1be0..000000000000 --- a/target/linux/brcm2708/patches-4.9/0121-ARM64-Make-it-work-again-on-4.9-1790.patch +++ /dev/null @@ -1,410 +0,0 @@ -From fe3c34c6196cfc708a515e44dd432da0e6cc0aba Mon Sep 17 00:00:00 2001 -From: Electron752 -Date: Thu, 12 Jan 2017 07:07:08 -0800 -Subject: [PATCH] ARM64: Make it work again on 4.9 (#1790) - -* Invoke the dtc compiler with the same options used in arm mode. -* ARM64 now uses the bcm2835 platform just like ARM32. -* ARM64: Update bcmrpi3_defconfig - -Signed-off-by: Michael Zoran ---- - arch/arm64/Kconfig.platforms | 22 ------ - arch/arm64/boot/dts/broadcom/Makefile | 10 ++- - arch/arm64/boot/dts/overlays | 1 + - arch/arm64/configs/bcmrpi3_defconfig | 126 ++++++++++------------------------ - 4 files changed, 48 insertions(+), 111 deletions(-) - create mode 120000 arch/arm64/boot/dts/overlays - -diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms -index 7d213c2c..101794f 100644 ---- a/arch/arm64/Kconfig.platforms -+++ b/arch/arm64/Kconfig.platforms -@@ -1,27 +1,5 @@ - menu "Platform selection" - --config MACH_BCM2709 -- bool -- --config ARCH_BCM2709 -- bool "Broadcom BCM2709 family" -- select MACH_BCM2709 -- select HAVE_SMP -- select ARM_AMBA -- select COMMON_CLK -- select ARCH_HAS_CPUFREQ -- select GENERIC_CLOCKEVENTS -- select MULTI_IRQ_HANDLER -- select SPARSE_IRQ -- select MFD_SYSCON -- select VC4 -- select USE_OF -- select ARCH_REQUIRE_GPIOLIB -- select PINCTRL -- select PINCTRL_BCM2835 -- help -- This enables support for Broadcom BCM2709 boards. -- - config ARCH_SUNXI - bool "Allwinner sunxi 64-bit SoC Family" - select GENERIC_IRQ_CHIP -diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile -index 2152448..7aa03be 100644 ---- a/arch/arm64/boot/dts/broadcom/Makefile -+++ b/arch/arm64/boot/dts/broadcom/Makefile -@@ -1,7 +1,15 @@ -+# Enable fixups to support overlays on BCM2835 platforms -+ -+ifeq ($(CONFIG_ARCH_BCM2835),y) -+DTC_FLAGS ?= -@ -H epapr -+endif -+ - dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb - dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb - dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb --dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb -+dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb -+ -+dts-dirs += ../overlays - - always := $(dtb-y) - subdir-y := $(dts-dirs) -diff --git a/arch/arm64/boot/dts/overlays b/arch/arm64/boot/dts/overlays -new file mode 120000 -index 0000000..ded0864 ---- /dev/null -+++ b/arch/arm64/boot/dts/overlays -@@ -0,0 +1 @@ -+../../../arm/boot/dts/overlays -\ No newline at end of file -diff --git a/arch/arm64/configs/bcmrpi3_defconfig b/arch/arm64/configs/bcmrpi3_defconfig -index 53da5c7..c7e891d 100644 ---- a/arch/arm64/configs/bcmrpi3_defconfig -+++ b/arch/arm64/configs/bcmrpi3_defconfig -@@ -1,52 +1,9 @@ --# CONFIG_ARM_PATCH_PHYS_VIRT is not set --CONFIG_PHYS_OFFSET=0 - CONFIG_LOCALVERSION="-v8" - # CONFIG_LOCALVERSION_AUTO is not set --CONFIG_64BIT=y - CONFIG_SYSVIPC=y - CONFIG_POSIX_MQUEUE=y - CONFIG_NO_HZ=y - CONFIG_HIGH_RES_TIMERS=y -- --# --# ARM errata workarounds via the alternatives framework --# --CONFIG_ARM64_ERRATUM_826319=n --CONFIG_ARM64_ERRATUM_827319=n --CONFIG_ARM64_ERRATUM_824069=n --CONFIG_ARM64_ERRATUM_819472=n --CONFIG_ARM64_ERRATUM_832075=n --CONFIG_ARM64_ERRATUM_845719=n --CONFIG_ARM64_ERRATUM_843419=n --CONFIG_CAVIUM_ERRATUM_22375=n --CONFIG_CAVIUM_ERRATUM_23154=n --CONFIG_CAVIUM_ERRATUM_27456=n --CONFIG_ARM64_4K_PAGES=y --CONFIG_ARM64_VA_BITS_39=y --CONFIG_ARM64_VA_BITS=39 --CONFIG_SCHED_MC=y --CONFIG_NR_CPUS=4 --CONFIG_HOTPLUG_CPU=y --CONFIG_ARMV8_DEPRECATED=y --CONFIG_SWP_EMULATION=y --CONFIG_CP15_BARRIER_EMULATION=y --CONFIG_SETEND_EMULATION=y -- --# --# ARMv8.1 architectural features --# --CONFIG_ARM64_HW_AFDBM=y --CONFIG_ARM64_PAN=y --CONFIG_ARM64_LSE_ATOMICS=y --CONFIG_ARM64_VHE=y -- --# --# ARMv8.2 architectural features --# --CONFIG_ARM64_UAO=y --CONFIG_ARM64_MODULE_CMODEL_LARGE=n --CONFIG_RANDOMIZE_BASE=n -- - CONFIG_BSD_PROCESS_ACCT=y - CONFIG_BSD_PROCESS_ACCT_V3=y - CONFIG_TASKSTATS=y -@@ -55,7 +12,6 @@ CONFIG_TASK_XACCT=y - CONFIG_TASK_IO_ACCOUNTING=y - CONFIG_IKCONFIG=m - CONFIG_IKCONFIG_PROC=y --CONFIG_NMI_LOG_BUF_SHIFT=12 - CONFIG_MEMCG=y - CONFIG_BLK_CGROUP=y - CONFIG_CGROUP_FREEZER=y -@@ -69,54 +25,49 @@ CONFIG_BLK_DEV_INITRD=y - CONFIG_EMBEDDED=y - # CONFIG_COMPAT_BRK is not set - CONFIG_PROFILING=y --CONFIG_OPROFILE=m - CONFIG_KPROBES=y - CONFIG_JUMP_LABEL=y - CONFIG_MODULES=y - CONFIG_MODULE_UNLOAD=y - CONFIG_MODVERSIONS=y - CONFIG_MODULE_SRCVERSION_ALL=y --CONFIG_TRIM_UNUSED_KSYMS=y - CONFIG_BLK_DEV_THROTTLING=y - CONFIG_PARTITION_ADVANCED=y - CONFIG_MAC_PARTITION=y - CONFIG_CFQ_GROUP_IOSCHED=y --CONFIG_ARCH_BCM2709=y --# CONFIG_CACHE_L2X0 is not set --CONFIG_SMP=y --CONFIG_HAVE_ARM_ARCH_TIMER=y --CONFIG_VMSPLIT_2G=y --CONFIG_PREEMPT_VOLUNTARY=y --CONFIG_AEABI=y --CONFIG_OABI_COMPAT=y --# CONFIG_CPU_SW_DOMAIN_PAN is not set -+CONFIG_ARCH_BCM2835=y -+# CONFIG_CAVIUM_ERRATUM_22375 is not set -+# CONFIG_CAVIUM_ERRATUM_23154 is not set -+# CONFIG_CAVIUM_ERRATUM_27456 is not set -+CONFIG_SCHED_MC=y -+CONFIG_NR_CPUS=4 -+CONFIG_PREEMPT=y -+CONFIG_HZ_1000=y - CONFIG_CLEANCACHE=y - CONFIG_FRONTSWAP=y - CONFIG_CMA=y - CONFIG_ZSMALLOC=m - CONFIG_PGTABLE_MAPPING=y --CONFIG_UACCESS_WITH_MEMCPY=y - CONFIG_SECCOMP=y --# CONFIG_ATAGS is not set --CONFIG_ZBOOT_ROM_TEXT=0x0 --CONFIG_ZBOOT_ROM_BSS=0x0 -+CONFIG_ARMV8_DEPRECATED=y -+CONFIG_SWP_EMULATION=y -+CONFIG_CP15_BARRIER_EMULATION=y -+CONFIG_SETEND_EMULATION=y - CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" -+CONFIG_BINFMT_MISC=y -+CONFIG_COMPAT=y -+# CONFIG_SUSPEND is not set -+CONFIG_PM=y -+CONFIG_CPU_IDLE=y -+CONFIG_ARM_CPUIDLE=y - CONFIG_CPU_FREQ=y -+CONFIG_CPU_FREQ_STAT=y - CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y - CONFIG_CPU_FREQ_GOV_PERFORMANCE=y - CONFIG_CPU_FREQ_GOV_USERSPACE=y - CONFIG_CPU_FREQ_GOV_ONDEMAND=y - CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y - CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y --CONFIG_VFP=y --CONFIG_NEON=y --CONFIG_KERNEL_MODE_NEON=y --CONFIG_BINFMT_MISC=m --CONFIG_COMPAT=y --CONFIG_SYSVIPC_COMPAT=y -- --# CONFIG_SUSPEND is not set --CONFIG_PM=y - CONFIG_NET=y - CONFIG_PACKET=y - CONFIG_UNIX=y -@@ -437,6 +388,7 @@ CONFIG_BT_MRVL=m - CONFIG_BT_MRVL_SDIO=m - CONFIG_BT_ATH3K=m - CONFIG_BT_WILINK=m -+CONFIG_CFG80211=m - CONFIG_MAC80211=m - CONFIG_MAC80211_MESH=y - CONFIG_WIMAX=m -@@ -490,7 +442,6 @@ CONFIG_BONDING=m - CONFIG_DUMMY=m - CONFIG_IFB=m - CONFIG_MACVLAN=m --CONFIG_IPVLAN=m - CONFIG_VXLAN=m - CONFIG_NETCONSOLE=m - CONFIG_TUN=m -@@ -579,8 +530,6 @@ CONFIG_RT2800USB_RT3573=y - CONFIG_RT2800USB_RT53XX=y - CONFIG_RT2800USB_RT55XX=y - CONFIG_RT2800USB_UNKNOWN=y --CONFIG_RTL8187=m --CONFIG_RTL8192CU=n - CONFIG_USB_ZD1201=m - CONFIG_ZD1211RW=m - CONFIG_MAC80211_HWSIM=m -@@ -606,7 +555,7 @@ CONFIG_JOYSTICK_RPISENSE=m - CONFIG_INPUT_TOUCHSCREEN=y - CONFIG_TOUCHSCREEN_ADS7846=m - CONFIG_TOUCHSCREEN_EGALAX=m --CONFIG_TOUCHSCREEN_FT6236=m -+CONFIG_TOUCHSCREEN_EKTF2127=m - CONFIG_TOUCHSCREEN_RPI_FT5406=m - CONFIG_TOUCHSCREEN_USB_COMPOSITE=m - CONFIG_TOUCHSCREEN_STMPE=m -@@ -626,10 +575,8 @@ CONFIG_SERIO_RAW=m - CONFIG_GAMEPORT=m - CONFIG_GAMEPORT_NS558=m - CONFIG_GAMEPORT_L4=m --CONFIG_BRCM_CHAR_DRIVERS=n --CONFIG_BCM_VC_CMA=n --CONFIG_BCM_VCIO=n --CONFIG_BCM_VC_SM=n -+# CONFIG_BCM2835_DEVGPIOMEM is not set -+# CONFIG_BCM2835_SMI_DEV is not set - # CONFIG_LEGACY_PTYS is not set - # CONFIG_DEVKMEM is not set - CONFIG_SERIAL_8250=y -@@ -638,6 +585,9 @@ CONFIG_SERIAL_8250_CONSOLE=y - # CONFIG_SERIAL_8250_DMA is not set - CONFIG_SERIAL_8250_NR_UARTS=1 - CONFIG_SERIAL_8250_RUNTIME_UARTS=0 -+CONFIG_SERIAL_8250_EXTENDED=y -+CONFIG_SERIAL_8250_SHARE_IRQ=y -+CONFIG_SERIAL_8250_BCM2835AUX=y - CONFIG_SERIAL_OF_PLATFORM=y - CONFIG_SERIAL_AMBA_PL011=y - CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -@@ -650,6 +600,7 @@ CONFIG_I2C=y - CONFIG_I2C_CHARDEV=m - CONFIG_I2C_MUX_PCA954x=m - CONFIG_I2C_BCM2708=m -+CONFIG_I2C_BCM2835=m - CONFIG_I2C_GPIO=m - CONFIG_SPI=y - CONFIG_SPI_BCM2835=m -@@ -681,13 +632,13 @@ CONFIG_W1_SLAVE_DS2780=m - CONFIG_W1_SLAVE_DS2781=m - CONFIG_W1_SLAVE_DS28E04=m - CONFIG_W1_SLAVE_BQ27000=m --CONFIG_BATTERY_DS2760=m --CONFIG_POWER_RESET=y - CONFIG_POWER_RESET_GPIO=y -+CONFIG_BATTERY_DS2760=m - CONFIG_HWMON=m - CONFIG_SENSORS_LM75=m - CONFIG_SENSORS_SHT21=m - CONFIG_SENSORS_SHTC1=m -+CONFIG_SENSORS_INA2XX=m - CONFIG_THERMAL=y - CONFIG_THERMAL_BCM2835=y - CONFIG_WATCHDOG=y -@@ -835,8 +786,6 @@ CONFIG_VIDEO_EM28XX_V4L2=m - CONFIG_VIDEO_EM28XX_ALSA=m - CONFIG_VIDEO_EM28XX_DVB=m - CONFIG_V4L_PLATFORM_DRIVERS=y --CONFIG_VIDEO_BCM2835=n --CONFIG_VIDEO_BCM2835_MMAL=n - CONFIG_RADIO_SI470X=y - CONFIG_USB_SI470X=m - CONFIG_I2C_SI470X=m -@@ -892,8 +841,6 @@ CONFIG_SND_VIRMIDI=m - CONFIG_SND_MTPAV=m - CONFIG_SND_SERIAL_U16550=m - CONFIG_SND_MPU401=m --CONFIG_SND_ARM=n --CONFIG_SND_BCM2835=n - CONFIG_SND_USB_AUDIO=m - CONFIG_SND_USB_UA101=m - CONFIG_SND_USB_CAIAQ=m -@@ -916,7 +863,10 @@ CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m - CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m - CONFIG_SND_DIGIDAC1_SOUNDCARD=m - CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m -+CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m -+CONFIG_SND_PISOUND=m - CONFIG_SND_SOC_ADAU1701=m -+CONFIG_SND_SOC_AK4554=m - CONFIG_SND_SOC_WM8804_I2C=m - CONFIG_SND_SIMPLE_CARD=m - CONFIG_SOUND_PRIME=m -@@ -979,8 +929,6 @@ CONFIG_USB_HIDDEV=y - CONFIG_USB=y - CONFIG_USB_ANNOUNCE_NEW_DEVICES=y - CONFIG_USB_MON=m --CONFIG_USB_DWCOTG=n --CONFIG_USB_DWC2=y - CONFIG_USB_PRINTER=m - CONFIG_USB_STORAGE=y - CONFIG_USB_STORAGE_REALTEK=m -@@ -1001,6 +949,7 @@ CONFIG_USB_MICROTEK=m - CONFIG_USBIP_CORE=m - CONFIG_USBIP_VHCI_HCD=m - CONFIG_USBIP_HOST=m -+CONFIG_USB_DWC2=y - CONFIG_USB_SERIAL=m - CONFIG_USB_SERIAL_GENERIC=y - CONFIG_USB_SERIAL_AIRCABLE=m -@@ -1096,6 +1045,7 @@ CONFIG_LEDS_TRIGGER_INPUT=y - CONFIG_LEDS_TRIGGER_PANIC=y - CONFIG_RTC_CLASS=y - # CONFIG_RTC_HCTOSYS is not set -+CONFIG_RTC_DRV_ABX80X=m - CONFIG_RTC_DRV_DS1307=m - CONFIG_RTC_DRV_DS1374=m - CONFIG_RTC_DRV_DS1672=m -@@ -1103,7 +1053,6 @@ CONFIG_RTC_DRV_MAX6900=m - CONFIG_RTC_DRV_RS5C372=m - CONFIG_RTC_DRV_ISL1208=m - CONFIG_RTC_DRV_ISL12022=m --CONFIG_RTC_DRV_ISL12057=m - CONFIG_RTC_DRV_X1205=m - CONFIG_RTC_DRV_PCF8523=m - CONFIG_RTC_DRV_PCF8563=m -@@ -1137,7 +1086,6 @@ CONFIG_STAGING=y - CONFIG_PRISM2_USB=m - CONFIG_R8712U=m - CONFIG_R8188EU=m --CONFIG_R8723AU=m - CONFIG_VT6656=m - CONFIG_SPEAKUP=m - CONFIG_SPEAKUP_SYNTH_SOFT=m -@@ -1153,6 +1101,7 @@ CONFIG_FB_TFT_BD663474=m - CONFIG_FB_TFT_HX8340BN=m - CONFIG_FB_TFT_HX8347D=m - CONFIG_FB_TFT_HX8353D=m -+CONFIG_FB_TFT_HX8357D=m - CONFIG_FB_TFT_ILI9163=m - CONFIG_FB_TFT_ILI9320=m - CONFIG_FB_TFT_ILI9325=m -@@ -1176,6 +1125,7 @@ CONFIG_FB_TFT_UPD161704=m - CONFIG_FB_TFT_WATTEROTT=m - CONFIG_FB_FLEX=m - CONFIG_FB_TFT_FBTFT_DEVICE=m -+# CONFIG_BCM2708_VCHIQ is not set - CONFIG_MAILBOX=y - CONFIG_BCM2835_MBOX=y - # CONFIG_IOMMU_SUPPORT is not set -@@ -1189,6 +1139,7 @@ CONFIG_IIO_KFIFO_BUF=m - CONFIG_MCP320X=m - CONFIG_MCP3422=m - CONFIG_DHT11=m -+CONFIG_HTU21=m - CONFIG_PWM_BCM2835=m - CONFIG_PWM_PCA9685=m - CONFIG_RASPBERRYPI_FIRMWARE=y -@@ -1309,6 +1260,7 @@ CONFIG_BOOT_PRINTK_DELAY=y - CONFIG_DEBUG_MEMORY_INIT=y - CONFIG_DETECT_HUNG_TASK=y - CONFIG_TIMER_STATS=y -+CONFIG_LATENCYTOP=y - CONFIG_IRQSOFF_TRACER=y - CONFIG_SCHED_TRACER=y - CONFIG_STACK_TRACER=y -@@ -1331,5 +1283,3 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m - CONFIG_ARM64_CRYPTO=y - CONFIG_CRC_ITU_T=y - CONFIG_LIBCRC32C=y --CONFIG_BCM2708_VCHIQ=n --CONFIG_ARCH_BCM2835=y --- -2.1.4 - diff --git a/target/linux/brcm2708/patches-4.9/0122-ARM64-Enable-Kernel-Address-Space-Randomization-1792.patch b/target/linux/brcm2708/patches-4.9/0122-ARM64-Enable-Kernel-Address-Space-Randomization-1792.patch deleted file mode 100644 index 423db95e9e23..000000000000 --- a/target/linux/brcm2708/patches-4.9/0122-ARM64-Enable-Kernel-Address-Space-Randomization-1792.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 6dfa60daaa0966a8e414ab0a7fd002a99001920a Mon Sep 17 00:00:00 2001 -From: Electron752 -Date: Sat, 14 Jan 2017 02:54:26 -0800 -Subject: [PATCH] ARM64: Enable Kernel Address Space Randomization (#1792) - -Randomization allows the mapping between virtual addresses and physical -address to be different on each boot. This makes it more difficult -to exploit security vulnerabilities that require knowledge of fixed -hardware addresses. - -The firmware generates a 8 byte random number during bootup and stores -it in the device tree under chosen/kaslr-seed. This number is used -to randomize the address mapping. - -This change enables this feature in the build configuration for ARM64. - -Signed-off-by: Michael Zoran ---- - arch/arm64/configs/bcmrpi3_defconfig | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm64/configs/bcmrpi3_defconfig -+++ b/arch/arm64/configs/bcmrpi3_defconfig -@@ -53,6 +53,7 @@ CONFIG_ARMV8_DEPRECATED=y - CONFIG_SWP_EMULATION=y - CONFIG_CP15_BARRIER_EMULATION=y - CONFIG_SETEND_EMULATION=y -+CONFIG_RANDOMIZE_BASE=y - CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" - CONFIG_BINFMT_MISC=y - CONFIG_COMPAT=y diff --git a/target/linux/brcm2708/patches-4.9/0124-ARM64-Enable-RTL8187-RTL8192CU-wifi-in-build-config.patch b/target/linux/brcm2708/patches-4.9/0124-ARM64-Enable-RTL8187-RTL8192CU-wifi-in-build-config.patch deleted file mode 100644 index c947a74c5de5..000000000000 --- a/target/linux/brcm2708/patches-4.9/0124-ARM64-Enable-RTL8187-RTL8192CU-wifi-in-build-config.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 564df2de35a212639eb7e357442f35fa89bcbde4 Mon Sep 17 00:00:00 2001 -From: Michael Zoran -Date: Sun, 15 Jan 2017 07:31:59 -0800 -Subject: [PATCH] ARM64: Enable RTL8187/RTL8192CU wifi in build config - -These drivers build now, so they can be enabled back -in the build configuration just like they are for -32 bit. - -Signed-off-by: Michael Zoran ---- - arch/arm64/configs/bcmrpi3_defconfig | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm64/configs/bcmrpi3_defconfig -+++ b/arch/arm64/configs/bcmrpi3_defconfig -@@ -531,6 +531,8 @@ CONFIG_RT2800USB_RT3573=y - CONFIG_RT2800USB_RT53XX=y - CONFIG_RT2800USB_RT55XX=y - CONFIG_RT2800USB_UNKNOWN=y -+CONFIG_RTL8187=m -+CONFIG_RTL8192CU=m - CONFIG_USB_ZD1201=m - CONFIG_ZD1211RW=m - CONFIG_MAC80211_HWSIM=m diff --git a/target/linux/brcm2708/patches-4.9/0125-BCM270X_DT-Add-spi0-cs-overlay.patch b/target/linux/brcm2708/patches-4.9/0125-BCM270X_DT-Add-spi0-cs-overlay.patch deleted file mode 100644 index 2fd8366f4ee2..000000000000 --- a/target/linux/brcm2708/patches-4.9/0125-BCM270X_DT-Add-spi0-cs-overlay.patch +++ /dev/null @@ -1,83 +0,0 @@ -From 48eea36959fb8d854b4cf1ee4284646be5a279e0 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 16 Jan 2017 14:53:12 +0000 -Subject: [PATCH] BCM270X_DT: Add spi0-cs overlay - -The spi0-cs overlay allows the software chip selectts to be modified -using the cs0_pin and cs1_pin parameters. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 9 +++++++- - arch/arm/boot/dts/overlays/spi0-cs-overlay.dts | 29 ++++++++++++++++++++++++++ - 3 files changed, 38 insertions(+), 1 deletion(-) - create mode 100644 arch/arm/boot/dts/overlays/spi0-cs-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -83,6 +83,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - smi-nand.dtbo \ - spi-gpio35-39.dtbo \ - spi-rtc.dtbo \ -+ spi0-cs.dtbo \ - spi0-hw-cs.dtbo \ - spi1-1cs.dtbo \ - spi1-2cs.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1138,7 +1138,7 @@ Params: - - - Name: spi-gpio35-39 --Info: move SPI function block to GPIO 35 to 39 -+Info: Move SPI function block to GPIO 35 to 39 - Load: dtoverlay=spi-gpio35-39 - Params: - -@@ -1149,6 +1149,13 @@ Load: dtoverlay=spi-rtc,= - Params: pcf2123 Select the PCF2123 device - - -+Name: spi0-cs -+Info: Allows the (software) CS pins for SPI0 to be changed -+Load: dtoverlay=spi0-cs,= -+Params: cs0_pin GPIO pin for CS0 (default 8) -+ cs1_pin GPIO pin for CS1 (default 7) -+ -+ - Name: spi0-hw-cs - Info: Re-enables hardware CS/CE (chip selects) for SPI0 - Load: dtoverlay=spi0-hw-cs ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi0-cs-overlay.dts -@@ -0,0 +1,29 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spi0_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <8 7>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi0>; -+ frag1: __overlay__ { -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&frag0>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.9/0126-spi-bcm2835-Disable-forced-software-CS.patch b/target/linux/brcm2708/patches-4.9/0126-spi-bcm2835-Disable-forced-software-CS.patch deleted file mode 100644 index 544ccf6f0b0f..000000000000 --- a/target/linux/brcm2708/patches-4.9/0126-spi-bcm2835-Disable-forced-software-CS.patch +++ /dev/null @@ -1,26 +0,0 @@ -From a6ef8db0e46713da43c81bc15fed01a4da0bd5a4 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 1 Jul 2016 22:09:24 +0100 -Subject: [PATCH] spi-bcm2835: Disable forced software CS - -Select software CS in bcm2708_common.dtsi, and disable the automatic -conversion in the driver to allow hardware CS to be re-enabled with an -overlay. - -See: https://github.com/raspberrypi/linux/issues/1547 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm283x.dtsi | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/boot/dts/bcm283x.dtsi -+++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -163,6 +163,7 @@ - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; - }; - - i2c0: i2c@7e205000 { diff --git a/target/linux/brcm2708/patches-4.9/0127-config-Add-CONFIG_TCP_CONG_BBR.patch b/target/linux/brcm2708/patches-4.9/0127-config-Add-CONFIG_TCP_CONG_BBR.patch deleted file mode 100644 index cec560e06e1e..000000000000 --- a/target/linux/brcm2708/patches-4.9/0127-config-Add-CONFIG_TCP_CONG_BBR.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 6f95da255ded5f1da673f826de07963e6a619e3d Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Mon, 16 Jan 2017 16:33:54 +0000 -Subject: [PATCH] config: Add CONFIG_TCP_CONG_BBR See: - https://github.com/raspberrypi/linux/issues/1784 - ---- - arch/arm/configs/bcm2709_defconfig | 2 ++ - arch/arm/configs/bcmrpi_defconfig | 2 ++ - 2 files changed, 4 insertions(+) - ---- a/arch/arm/configs/bcm2709_defconfig -+++ b/arch/arm/configs/bcm2709_defconfig -@@ -99,6 +99,8 @@ CONFIG_INET_XFRM_MODE_TRANSPORT=m - CONFIG_INET_XFRM_MODE_TUNNEL=m - CONFIG_INET_XFRM_MODE_BEET=m - CONFIG_INET_DIAG=m -+CONFIG_TCP_CONG_ADVANCED=y -+CONFIG_TCP_CONG_BBR=m - CONFIG_IPV6=m - CONFIG_IPV6_ROUTER_PREF=y - CONFIG_INET6_AH=m ---- a/arch/arm/configs/bcmrpi_defconfig -+++ b/arch/arm/configs/bcmrpi_defconfig -@@ -95,6 +95,8 @@ CONFIG_INET_XFRM_MODE_TRANSPORT=m - CONFIG_INET_XFRM_MODE_TUNNEL=m - CONFIG_INET_XFRM_MODE_BEET=m - CONFIG_INET_DIAG=m -+CONFIG_TCP_CONG_ADVANCED=y -+CONFIG_TCP_CONG_BBR=m - CONFIG_IPV6=m - CONFIG_IPV6_ROUTER_PREF=y - CONFIG_INET6_AH=m diff --git a/target/linux/brcm2708/patches-4.9/0128-BCM270X_DT-Enable-UART0-on-CM3.patch b/target/linux/brcm2708/patches-4.9/0128-BCM270X_DT-Enable-UART0-on-CM3.patch deleted file mode 100644 index 4fbc443dcd28..000000000000 --- a/target/linux/brcm2708/patches-4.9/0128-BCM270X_DT-Enable-UART0-on-CM3.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 44586947e86f67ad71fdd3afca51f04fc27f3872 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 17 Jan 2017 11:34:58 +0000 -Subject: [PATCH] BCM270X_DT: Enable UART0 on CM3 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts -@@ -6,6 +6,10 @@ - model = "Raspberry Pi Compute Module 3"; - }; - -+&uart0 { -+ status = "okay"; -+}; -+ - &gpio { - sdhost_pins: sdhost_pins { - brcm,pins = <48 49 50 51 52 53>; diff --git a/target/linux/brcm2708/patches-4.9/0129-config-Add-CONFIG_MD_M25P80-and-CONFIG_MD_SPI_NOR.patch b/target/linux/brcm2708/patches-4.9/0129-config-Add-CONFIG_MD_M25P80-and-CONFIG_MD_SPI_NOR.patch deleted file mode 100644 index ab5e409006b1..000000000000 --- a/target/linux/brcm2708/patches-4.9/0129-config-Add-CONFIG_MD_M25P80-and-CONFIG_MD_SPI_NOR.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 3f6ad80c79570b157d651720bf161843a360e922 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 17 Jan 2017 14:39:39 +0000 -Subject: [PATCH] config: Add CONFIG_MD_M25P80 and CONFIG_MD_SPI_NOR - -See: https://github.com/raspberrypi/linux/issues/1781 - -Signed-off-by: Phil Elwell ---- - arch/arm/configs/bcm2709_defconfig | 2 ++ - arch/arm/configs/bcmrpi_defconfig | 2 ++ - 2 files changed, 4 insertions(+) - ---- a/arch/arm/configs/bcm2709_defconfig -+++ b/arch/arm/configs/bcm2709_defconfig -@@ -406,7 +406,9 @@ CONFIG_DMA_CMA=y - CONFIG_CMA_SIZE_MBYTES=5 - CONFIG_MTD=m - CONFIG_MTD_BLOCK=m -+CONFIG_MTD_M25P80=m - CONFIG_MTD_NAND=m -+CONFIG_MTD_SPI_NOR=m - CONFIG_MTD_UBI=m - CONFIG_OF_CONFIGFS=y - CONFIG_ZRAM=m ---- a/arch/arm/configs/bcmrpi_defconfig -+++ b/arch/arm/configs/bcmrpi_defconfig -@@ -402,7 +402,9 @@ CONFIG_DMA_CMA=y - CONFIG_CMA_SIZE_MBYTES=5 - CONFIG_MTD=m - CONFIG_MTD_BLOCK=m -+CONFIG_MTD_M25P80=m - CONFIG_MTD_NAND=m -+CONFIG_MTD_SPI_NOR=m - CONFIG_MTD_UBI=m - CONFIG_OF_CONFIGFS=y - CONFIG_ZRAM=m diff --git a/target/linux/brcm2708/patches-4.9/0130-ARM64-DWC_OTG-Port-dwc_otg-driver-to-ARM64.patch b/target/linux/brcm2708/patches-4.9/0130-ARM64-DWC_OTG-Port-dwc_otg-driver-to-ARM64.patch deleted file mode 100644 index a94fee4690c6..000000000000 --- a/target/linux/brcm2708/patches-4.9/0130-ARM64-DWC_OTG-Port-dwc_otg-driver-to-ARM64.patch +++ /dev/null @@ -1,329 +0,0 @@ -From 99c33b6e418cefebb461fee0ad3a927a0c4127f1 Mon Sep 17 00:00:00 2001 -From: Michael Zoran -Date: Sat, 14 Jan 2017 21:33:51 -0800 -Subject: [PATCH] ARM64/DWC_OTG: Port dwc_otg driver to ARM64 - -In ARM64, the FIQ mechanism used by this driver is not current -implemented. As a workaround, reqular IRQ is used instead -of FIQ. - -In a separate change, the IRQ-CPU mapping is round robined -on ARM64 to increase concurrency and allow multiple interrupts -to be serviced at a time. This reduces the need for FIQ. - -Tests Run: - -This mechanism is most likely to break when multiple USB devices -are attached at the same time. So the system was tested under -stress. - -Devices: - -1. USB Speakers playing back a FLAC audio through VLC - at 96KHz.(Higher then typically, but supported on my speakers). - -2. sftp transferring large files through the buildin ethernet - connection which is connected through USB. - -3. Keyboard and mouse attached and being used. - -Although I do occasionally hear some glitches, the music seems to -play quite well. - -Signed-off-by: Michael Zoran ---- - drivers/usb/host/dwc_otg/Makefile | 3 ++ - drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 17 +++++++ - drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h | 24 ++++++++++ - drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 4 ++ - drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h | 4 ++ - drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c | 3 +- - drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 72 ++++++++++++++++++++++++++++ - drivers/usb/host/dwc_otg/dwc_otg_os_dep.h | 2 + - 8 files changed, 128 insertions(+), 1 deletion(-) - ---- a/drivers/usb/host/dwc_otg/Makefile -+++ b/drivers/usb/host/dwc_otg/Makefile -@@ -37,7 +37,10 @@ dwc_otg-objs += dwc_otg_pcd_linux.o dwc_ - dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_linux.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o dwc_otg_hcd_ddma.o - dwc_otg-objs += dwc_otg_adp.o - dwc_otg-objs += dwc_otg_fiq_fsm.o -+ifneq ($(CONFIG_ARM64),y) - dwc_otg-objs += dwc_otg_fiq_stub.o -+endif -+ - ifneq ($(CFI),) - dwc_otg-objs += dwc_otg_cfi.o - endif ---- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c -@@ -74,6 +74,21 @@ void notrace _fiq_print(enum fiq_debug_l - } - } - -+ -+#ifdef CONFIG_ARM64 -+ -+inline void fiq_fsm_spin_lock(fiq_lock_t *lock) -+{ -+ spin_lock((spinlock_t *)lock); -+} -+ -+inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) -+{ -+ spin_unlock((spinlock_t *)lock); -+} -+ -+#else -+ - /** - * fiq_fsm_spin_lock() - ARMv6+ bare bones spinlock - * Must be called with local interrupts and FIQ disabled. -@@ -122,6 +137,8 @@ inline void fiq_fsm_spin_unlock(fiq_lock - inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) { } - #endif - -+#endif -+ - /** - * fiq_fsm_restart_channel() - Poke channel enable bit for a split transaction - * @channel: channel to re-enable ---- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h -+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h -@@ -127,6 +127,12 @@ enum fiq_debug_level { - FIQDBG_PORTHUB = (1 << 3), - }; - -+#ifdef CONFIG_ARM64 -+ -+typedef spinlock_t fiq_lock_t; -+ -+#else -+ - typedef struct { - union { - uint32_t slock; -@@ -137,6 +143,8 @@ typedef struct { - }; - } fiq_lock_t; - -+#endif -+ - struct fiq_state; - - extern void _fiq_print (enum fiq_debug_level dbg_lvl, volatile struct fiq_state *state, char *fmt, ...); -@@ -355,6 +363,22 @@ struct fiq_state { - struct fiq_channel_state channel[0]; - }; - -+#ifdef CONFIG_ARM64 -+ -+#ifdef local_fiq_enable -+#undef local_fiq_enable -+#endif -+ -+#ifdef local_fiq_disable -+#undef local_fiq_disable -+#endif -+ -+extern void local_fiq_enable(void); -+ -+extern void local_fiq_disable(void); -+ -+#endif -+ - extern void fiq_fsm_spin_lock(fiq_lock_t *lock); - - extern void fiq_fsm_spin_unlock(fiq_lock_t *lock); ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -@@ -1021,6 +1021,10 @@ int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd - } - DWC_MEMSET(hcd->fiq_state, 0, (sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels))); - -+#ifdef CONFIG_ARM64 -+ spin_lock_init(&hcd->fiq_state->lock); -+#endif -+ - for (i = 0; i < num_channels; i++) { - hcd->fiq_state->channel[i].fsm = FIQ_PASSTHROUGH; - } ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h -@@ -116,7 +116,11 @@ extern int32_t dwc_otg_hcd_handle_intr(d - /** This function is used to handle the fast interrupt - * - */ -+#ifdef CONFIG_ARM64 -+extern void dwc_otg_hcd_handle_fiq(void); -+#else - extern void __attribute__ ((naked)) dwc_otg_hcd_handle_fiq(void); -+#endif - - /** - * Returns private data set by ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c -@@ -36,8 +36,9 @@ - #include "dwc_otg_regs.h" - - #include -+#ifdef CONFIG_ARM - #include -- -+#endif - - extern bool microframe_schedule; - ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c -@@ -51,7 +51,9 @@ - #include - #include - #include -+#ifdef CONFIG_ARM - #include -+#endif - #include - #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) - #include <../drivers/usb/core/hcd.h> -@@ -71,6 +73,13 @@ - #include "dwc_otg_driver.h" - #include "dwc_otg_hcd.h" - -+#ifndef __virt_to_bus -+#define __virt_to_bus __virt_to_phys -+#define __bus_to_virt __phys_to_virt -+#define __pfn_to_bus(x) __pfn_to_phys(x) -+#define __bus_to_pfn(x) __phys_to_pfn(x) -+#endif -+ - extern unsigned char _dwc_otg_fiq_stub, _dwc_otg_fiq_stub_end; - - /** -@@ -393,14 +402,49 @@ static struct dwc_otg_hcd_function_ops h - .get_b_hnp_enable = _get_b_hnp_enable, - }; - -+#ifdef CONFIG_ARM64 -+ -+static int simfiq_irq = -1; -+ -+void local_fiq_enable(void) -+{ -+ if (simfiq_irq >= 0) -+ enable_irq(simfiq_irq); -+} -+ -+void local_fiq_disable(void) -+{ -+ if (simfiq_irq >= 0) -+ disable_irq(simfiq_irq); -+} -+ -+irqreturn_t fiq_irq_handler(int irq, void *dev_id) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *)dev_id; -+ -+ if (fiq_fsm_enable) -+ dwc_otg_fiq_fsm(dwc_otg_hcd->fiq_state, dwc_otg_hcd->core_if->core_params->host_channels); -+ else -+ dwc_otg_fiq_nop(dwc_otg_hcd->fiq_state); -+ -+ return IRQ_HANDLED; -+} -+ -+#else - static struct fiq_handler fh = { - .name = "usb_fiq", - }; - -+#endif -+ - static void hcd_init_fiq(void *cookie) - { - dwc_otg_device_t *otg_dev = cookie; - dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd; -+#ifdef CONFIG_ARM64 -+ int retval = 0; -+ int irq; -+#else - struct pt_regs regs; - int irq; - -@@ -428,6 +472,7 @@ static void hcd_init_fiq(void *cookie) - - // __show_regs(®s); - set_fiq_regs(®s); -+#endif - - //Set the mphi periph to the required registers - dwc_otg_hcd->fiq_state->mphi_regs.base = otg_dev->os_dep.mphi_base; -@@ -446,6 +491,23 @@ static void hcd_init_fiq(void *cookie) - DWC_WARN("MPHI periph has NOT been enabled"); - #endif - // Enable FIQ interrupt from USB peripheral -+#ifdef CONFIG_ARM64 -+ irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); -+ -+ if (irq < 0) { -+ DWC_ERROR("Can't get SIM-FIQ irq"); -+ return; -+ } -+ -+ retval = request_irq(irq, fiq_irq_handler, 0, "dwc_otg_sim-fiq", dwc_otg_hcd); -+ -+ if (retval < 0) { -+ DWC_ERROR("Unable to request SIM-FIQ irq\n"); -+ return; -+ } -+ -+ simfiq_irq = irq; -+#else - #ifdef CONFIG_MULTI_IRQ_HANDLER - irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); - #else -@@ -457,6 +519,8 @@ static void hcd_init_fiq(void *cookie) - } - enable_fiq(irq); - local_fiq_enable(); -+#endif -+ - } - - /** -@@ -519,6 +583,13 @@ int hcd_init(dwc_bus_dev_t *_dev) - otg_dev->hcd = dwc_otg_hcd; - otg_dev->hcd->otg_dev = otg_dev; - -+#ifdef CONFIG_ARM64 -+ if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) -+ goto error2; -+ -+ if (fiq_enable) -+ hcd_init_fiq(otg_dev); -+#else - if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) { - goto error2; - } -@@ -531,6 +602,7 @@ int hcd_init(dwc_bus_dev_t *_dev) - smp_call_function_single(0, hcd_init_fiq, otg_dev, 1); - } - } -+#endif - - hcd->self.otg_port = dwc_otg_hcd_otg_port(dwc_otg_hcd); - #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33) //don't support for LM(with 2.6.20.1 kernel) ---- a/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h -+++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h -@@ -76,8 +76,10 @@ - - #ifdef PLATFORM_INTERFACE - #include -+#ifdef CONFIG_ARM - #include - #endif -+#endif - - /** The OS page size */ - #define DWC_OS_PAGE_SIZE PAGE_SIZE diff --git a/target/linux/brcm2708/patches-4.9/0131-ARM64-Round-Robin-dispatch-IRQs-between-CPUs.patch b/target/linux/brcm2708/patches-4.9/0131-ARM64-Round-Robin-dispatch-IRQs-between-CPUs.patch deleted file mode 100644 index d11ca6bffdc1..000000000000 --- a/target/linux/brcm2708/patches-4.9/0131-ARM64-Round-Robin-dispatch-IRQs-between-CPUs.patch +++ /dev/null @@ -1,72 +0,0 @@ -From 3a9b48156c6681e846d1a7dbe4ecbb3ae14c2f3c Mon Sep 17 00:00:00 2001 -From: Michael Zoran -Date: Sat, 14 Jan 2017 21:43:57 -0800 -Subject: [PATCH] ARM64: Round-Robin dispatch IRQs between CPUs. - -IRQ-CPU mapping is round robined on ARM64 to increase -concurrency and allow multiple interrupts to be serviced -at a time. This reduces the need for FIQ. - -Signed-off-by: Michael Zoran ---- - drivers/irqchip/irq-bcm2835.c | 15 ++++++++++++++- - drivers/irqchip/irq-bcm2836.c | 21 +++++++++++++++++++++ - 2 files changed, 35 insertions(+), 1 deletion(-) - ---- a/drivers/irqchip/irq-bcm2835.c -+++ b/drivers/irqchip/irq-bcm2835.c -@@ -168,10 +168,23 @@ static void armctrl_unmask_irq(struct ir - } - } - -+#ifdef CONFIG_ARM64 -+void bcm2836_arm_irqchip_spin_gpu_irq(void); -+ -+static void armctrl_ack_irq(struct irq_data *d) -+{ -+ bcm2836_arm_irqchip_spin_gpu_irq(); -+} -+ -+#endif -+ - static struct irq_chip armctrl_chip = { - .name = "ARMCTRL-level", - .irq_mask = armctrl_mask_irq, -- .irq_unmask = armctrl_unmask_irq -+ .irq_unmask = armctrl_unmask_irq, -+#ifdef CONFIG_ARM64 -+ .irq_ack = armctrl_ack_irq -+#endif - }; - - static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr, ---- a/drivers/irqchip/irq-bcm2836.c -+++ b/drivers/irqchip/irq-bcm2836.c -@@ -145,6 +145,27 @@ static void bcm2836_arm_irqchip_unmask_g - { - } - -+#ifdef CONFIG_ARM64 -+ -+void bcm2836_arm_irqchip_spin_gpu_irq(void) -+{ -+ u32 i; -+ void __iomem *gpurouting = (intc.base + LOCAL_GPU_ROUTING); -+ u32 routing_val = readl(gpurouting); -+ -+ for (i = 1; i <= 3; i++) { -+ u32 new_routing_val = (routing_val + i) & 3; -+ -+ if (cpu_active(new_routing_val)) { -+ writel(new_routing_val, gpurouting); -+ return; -+ } -+ } -+} -+EXPORT_SYMBOL(bcm2836_arm_irqchip_spin_gpu_irq); -+ -+#endif -+ - static struct irq_chip bcm2836_arm_irqchip_gpu = { - .name = "bcm2836-gpu", - .irq_mask = bcm2836_arm_irqchip_mask_gpu_irq, diff --git a/target/linux/brcm2708/patches-4.9/0132-ARM64-Enable-DWC_OTG-Driver-In-ARM64-Build-Config-bc.patch b/target/linux/brcm2708/patches-4.9/0132-ARM64-Enable-DWC_OTG-Driver-In-ARM64-Build-Config-bc.patch deleted file mode 100644 index deae274af339..000000000000 --- a/target/linux/brcm2708/patches-4.9/0132-ARM64-Enable-DWC_OTG-Driver-In-ARM64-Build-Config-bc.patch +++ /dev/null @@ -1,21 +0,0 @@ -From ad17c9e5a03f835605560e7163e5e685a67abd1f Mon Sep 17 00:00:00 2001 -From: Michael Zoran -Date: Sat, 14 Jan 2017 21:45:03 -0800 -Subject: [PATCH] ARM64: Enable DWC_OTG Driver In ARM64 Build - Config(bcmrpi3_defconfig) - -Signed-off-by: Michael Zoran ---- - arch/arm64/configs/bcmrpi3_defconfig | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm64/configs/bcmrpi3_defconfig -+++ b/arch/arm64/configs/bcmrpi3_defconfig -@@ -932,6 +932,7 @@ CONFIG_USB_HIDDEV=y - CONFIG_USB=y - CONFIG_USB_ANNOUNCE_NEW_DEVICES=y - CONFIG_USB_MON=m -+CONFIG_USB_DWCOTG=y - CONFIG_USB_PRINTER=m - CONFIG_USB_STORAGE=y - CONFIG_USB_STORAGE_REALTEK=m diff --git a/target/linux/brcm2708/patches-4.9/0133-ARM64-Use-dwc_otg-driver-by-default-for-USB.patch b/target/linux/brcm2708/patches-4.9/0133-ARM64-Use-dwc_otg-driver-by-default-for-USB.patch deleted file mode 100644 index 53335b95fb71..000000000000 --- a/target/linux/brcm2708/patches-4.9/0133-ARM64-Use-dwc_otg-driver-by-default-for-USB.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 4eec6ce872ac46987efeb9b9cdab0ad78a563bdb Mon Sep 17 00:00:00 2001 -From: Michael Zoran -Date: Sat, 14 Jan 2017 21:46:04 -0800 -Subject: [PATCH] ARM64: Use dwc_otg driver by default for USB. - -If it breaks on anybody, they can use the standard device tree -overlays to switch back to the dwc2 driver. - -Signed-off-by: Michael Zoran ---- - arch/arm/boot/dts/bcm2710.dtsi | 7 ------- - 1 file changed, 7 deletions(-) - ---- a/arch/arm/boot/dts/bcm2710.dtsi -+++ b/arch/arm/boot/dts/bcm2710.dtsi -@@ -146,10 +146,3 @@ - interrupts = <8>; - }; - --#ifdef RPI364 --&usb { -- compatible = "brcm,bcm2835-usb"; -- reg = <0x7e980000 0x10000>; -- interrupts = <1 9>; --}; --#endif diff --git a/target/linux/brcm2708/patches-4.9/0134-BCM270X_DT-Add-reference-to-audio_pins-to-CM-dtb.patch b/target/linux/brcm2708/patches-4.9/0134-BCM270X_DT-Add-reference-to-audio_pins-to-CM-dtb.patch deleted file mode 100644 index 63df4a03787c..000000000000 --- a/target/linux/brcm2708/patches-4.9/0134-BCM270X_DT-Add-reference-to-audio_pins-to-CM-dtb.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 8630b0b3fea31138c52ef83848ae1a047baa3855 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 23 Jan 2017 17:36:50 +0000 -Subject: [PATCH] BCM270X_DT: Add reference to audio_pins to CM dtb - -The CM1 dtb contains an empty audio_pins node, but no reference to it. -Adding the usual pinctrl reference from the audio node enables the -audremap overlay (and others) to easily turn on audio. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2708-rpi-cm.dts | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts -@@ -85,6 +85,11 @@ - pinctrl-0 = <&i2s_pins>; - }; - -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ - &hdmi { - hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; - }; diff --git a/target/linux/brcm2708/patches-4.9/0135-config-Add-additional-network-scheduling-modules.patch b/target/linux/brcm2708/patches-4.9/0135-config-Add-additional-network-scheduling-modules.patch deleted file mode 100644 index 6c50870c7eb2..000000000000 --- a/target/linux/brcm2708/patches-4.9/0135-config-Add-additional-network-scheduling-modules.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 56aef4ffcf12fdede0dad012de939c5a7c9cc55b Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Wed, 25 Jan 2017 11:30:38 +0000 -Subject: [PATCH] config: Add additional network scheduling modules - ---- - arch/arm/configs/bcm2709_defconfig | 4 ++++ - arch/arm/configs/bcmrpi_defconfig | 4 ++++ - 2 files changed, 8 insertions(+) - ---- a/arch/arm/configs/bcm2709_defconfig -+++ b/arch/arm/configs/bcm2709_defconfig -@@ -296,6 +296,7 @@ CONFIG_NET_SCHED=y - CONFIG_NET_SCH_CBQ=m - CONFIG_NET_SCH_HTB=m - CONFIG_NET_SCH_HFSC=m -+CONFIG_NET_SCH_ATM=m - CONFIG_NET_SCH_PRIO=m - CONFIG_NET_SCH_MULTIQ=m - CONFIG_NET_SCH_RED=m -@@ -312,6 +313,9 @@ CONFIG_NET_SCH_CHOKE=m - CONFIG_NET_SCH_QFQ=m - CONFIG_NET_SCH_CODEL=m - CONFIG_NET_SCH_FQ_CODEL=m -+CONFIG_NET_SCH_FQ=m -+CONFIG_NET_SCH_HHF=m -+CONFIG_NET_SCH_PIE=m - CONFIG_NET_SCH_INGRESS=m - CONFIG_NET_SCH_PLUG=m - CONFIG_NET_CLS_BASIC=m ---- a/arch/arm/configs/bcmrpi_defconfig -+++ b/arch/arm/configs/bcmrpi_defconfig -@@ -292,6 +292,7 @@ CONFIG_NET_SCHED=y - CONFIG_NET_SCH_CBQ=m - CONFIG_NET_SCH_HTB=m - CONFIG_NET_SCH_HFSC=m -+CONFIG_NET_SCH_ATM=m - CONFIG_NET_SCH_PRIO=m - CONFIG_NET_SCH_MULTIQ=m - CONFIG_NET_SCH_RED=m -@@ -308,6 +309,9 @@ CONFIG_NET_SCH_CHOKE=m - CONFIG_NET_SCH_QFQ=m - CONFIG_NET_SCH_CODEL=m - CONFIG_NET_SCH_FQ_CODEL=m -+CONFIG_NET_SCH_FQ=m -+CONFIG_NET_SCH_HHF=m -+CONFIG_NET_SCH_PIE=m - CONFIG_NET_SCH_INGRESS=m - CONFIG_NET_SCH_PLUG=m - CONFIG_NET_CLS_BASIC=m diff --git a/target/linux/brcm2708/patches-4.9/0136-ASoC-A-simple-card-overlay-for-ADAU7002.patch b/target/linux/brcm2708/patches-4.9/0136-ASoC-A-simple-card-overlay-for-ADAU7002.patch deleted file mode 100644 index 4f122fcdb020..000000000000 --- a/target/linux/brcm2708/patches-4.9/0136-ASoC-A-simple-card-overlay-for-ADAU7002.patch +++ /dev/null @@ -1,93 +0,0 @@ -From 1cd1f19adbe020544e18193a006af9c71c8c82ca Mon Sep 17 00:00:00 2001 -From: chris johnson -Date: Sun, 22 Jan 2017 03:27:31 +0000 -Subject: [PATCH] ASoC: A simple-card overlay for ADAU7002 - -Usage: `dtoverlay=adau7002-simple` ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 6 +++ - .../boot/dts/overlays/adau7002-simple-overlay.dts | 52 ++++++++++++++++++++++ - 3 files changed, 59 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -2,6 +2,7 @@ - - dtbo-$(CONFIG_ARCH_BCM2835) += \ - adau1977-adc.dtbo \ -+ adau7002-simple.dtbo \ - ads1015.dtbo \ - ads7846.dtbo \ - akkordion-iqdacplus.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -168,6 +168,12 @@ Load: dtoverlay=adau1977-adc - Params: - - -+Name: adau7002-simple -+Info: Overlay for the activation of ADAU7002 stereo PDM to I2S converter. -+Load: dtoverlay=adau7002-simple,= -+Params: card-name Override the default, "adau7002", card name. -+ -+ - Name: ads1015 - Info: Overlay for activation of Texas Instruments ADS1015 ADC over I2C - Load: dtoverlay=ads1015,= ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts -@@ -0,0 +1,52 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ adau7002_codec: adau7002-codec { -+ #sound-dai-cells = <0>; -+ compatible = "adi,adau7002"; -+/* IOVDD-supply = <&supply>;*/ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ sound_overlay: __overlay__ { -+ compatible = "simple-audio-card"; -+ simple-audio-card,format = "i2s"; -+ simple-audio-card,name = "adau7002"; -+ simple-audio-card,bitclock-slave = <&dailink0_slave>; -+ simple-audio-card,frame-slave = <&dailink0_slave>; -+ simple-audio-card,widgets = -+ "Microphone", "Microphone Jack"; -+ simple-audio-card,routing = -+ "PDM_DAT", "Microphone Jack"; -+ status = "okay"; -+ simple-audio-card,cpu { -+ sound-dai = <&i2s>; -+ }; -+ dailink0_slave: simple-audio-card,codec { -+ sound-dai = <&adau7002_codec>; -+ }; -+ }; -+ }; -+ -+ -+ __overrides__ { -+ card-name = <&sound_overlay>,"simple-audio-card,name"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.9/0137-config-Add-SND_SOC_ADAU7002-codec-module.patch b/target/linux/brcm2708/patches-4.9/0137-config-Add-SND_SOC_ADAU7002-codec-module.patch deleted file mode 100644 index e4ef715fb35f..000000000000 --- a/target/linux/brcm2708/patches-4.9/0137-config-Add-SND_SOC_ADAU7002-codec-module.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 30db626576fa53cb6a0a27311baed4dd5c296c38 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 25 Jan 2017 21:17:23 +0000 -Subject: [PATCH] config: Add SND_SOC_ADAU7002 codec module - -As there is now an overlay requiring it, build the codec module. - -Signed-off-by: Phil Elwell ---- - arch/arm/configs/bcm2709_defconfig | 1 + - arch/arm/configs/bcmrpi_defconfig | 1 + - 2 files changed, 2 insertions(+) - ---- a/arch/arm/configs/bcm2709_defconfig -+++ b/arch/arm/configs/bcm2709_defconfig -@@ -884,6 +884,7 @@ CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m - CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m - CONFIG_SND_PISOUND=m - CONFIG_SND_SOC_ADAU1701=m -+CONFIG_SND_SOC_ADAU7002=m - CONFIG_SND_SOC_AK4554=m - CONFIG_SND_SOC_WM8804_I2C=m - CONFIG_SND_SIMPLE_CARD=m ---- a/arch/arm/configs/bcmrpi_defconfig -+++ b/arch/arm/configs/bcmrpi_defconfig -@@ -878,6 +878,7 @@ CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m - CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m - CONFIG_SND_PISOUND=m - CONFIG_SND_SOC_ADAU1701=m -+CONFIG_SND_SOC_ADAU7002=m - CONFIG_SND_SOC_AK4554=m - CONFIG_SND_SOC_WM8804_I2C=m - CONFIG_SND_SIMPLE_CARD=m diff --git a/target/linux/brcm2708/patches-4.9/0138-Add-overlay-for-mcp3008-adc-1818.patch b/target/linux/brcm2708/patches-4.9/0138-Add-overlay-for-mcp3008-adc-1818.patch deleted file mode 100644 index 560dc6c85475..000000000000 --- a/target/linux/brcm2708/patches-4.9/0138-Add-overlay-for-mcp3008-adc-1818.patch +++ /dev/null @@ -1,281 +0,0 @@ -From 33800ba2a14ff23db96fe5ea6e421a731f60c52b Mon Sep 17 00:00:00 2001 -From: Scott Ellis -Date: Fri, 27 Jan 2017 06:42:42 -0500 -Subject: [PATCH] Add overlay for mcp3008 adc (#1818) - -Some example usage: - -SPI0.0 -dtparam=spi=on -dtoverlay=mcp3008:spi0-0-present - -SPI0.1 -dtparam=spi=on -dtoverlay=mcp3008:spi0-1-present - -SPI0.0 and SPI0.1 -dtparam=spi=on -dtoverlay=mcp3008:spi0-0-present,spi0-1-present - -SPI1.0 -dtparam=spi=on -dtoverlay=spi1-1cs -dtoverlay=mcp3008:spi1-0-present - -SPI1.2 -dtparam=spi=on -dtoverlay=spi1-1cs:cs0_pin=16 -dtoverlay=mcp3008:spi1-0-present - -SPI1.0 and SPI1.1 -dtoverlay=spi1-2cs -dtoverlay=mcp3008:spi1-0-present,spi1-1-present - -Changing the speed - -SPI0.0 -dtparam=spi=on -dtoverlay=mcp3008:spi0-0-present,spi0-0-speed=2000000 ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 9 ++ - arch/arm/boot/dts/overlays/mcp3008-overlay.dts | 205 +++++++++++++++++++++++++ - 3 files changed, 215 insertions(+) - create mode 100755 arch/arm/boot/dts/overlays/mcp3008-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -47,6 +47,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - mcp23s17.dtbo \ - mcp2515-can0.dtbo \ - mcp2515-can1.dtbo \ -+ mcp3008.dtbo \ - midi-uart0.dtbo \ - mmc.dtbo \ - mz61581.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -742,6 +742,15 @@ Params: oscillator Clock fr - interrupt GPIO for interrupt signal - - -+Name: mcp3008 -+Info: Configures MCP3008 A/D converters -+ For devices on spi1 or spi2, the interfaces should be enabled -+ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. -+Load: dtoverlay=mcp3008,[=] -+Params: spi--present boolean, configure device at spi, cs -+ spi--speed integer, set the spi bus speed for this device -+ -+ - Name: midi-uart0 - Info: Configures UART0 (ttyAMA0) so that a requested 38.4kbaud actually gets - 31.25kbaud, the frequency required for MIDI ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mcp3008-overlay.dts -@@ -0,0 +1,205 @@ -+/* -+ * Device tree overlay for Microchip mcp3008 10-Bit A/D Converters -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&spidev0>; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev1>; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "spi1/spidev@0"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "spi1/spidev@1"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@4 { -+ target-path = "spi1/spidev@2"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@5 { -+ target-path = "spi2/spidev@0"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@6 { -+ target-path = "spi2/spidev@1"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@7 { -+ target-path = "spi2/spidev@2"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@8 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3008_00: mcp3008@0 { -+ compatible = "mcp3008"; -+ reg = <0>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@9 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3008_01: mcp3008@1 { -+ compatible = "mcp3008"; -+ reg = <1>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@10 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3008_10: mcp3008@0 { -+ compatible = "mcp3008"; -+ reg = <0>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@11 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3008_11: mcp3008@1 { -+ compatible = "mcp3008"; -+ reg = <1>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@12 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3008_12: mcp3008@2 { -+ compatible = "mcp3008"; -+ reg = <2>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@13 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3008_20: mcp3008@0 { -+ compatible = "mcp3008"; -+ reg = <0>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@14 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3008_21: mcp3008@1 { -+ compatible = "mcp3008"; -+ reg = <1>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@15 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3008_22: mcp3008@2 { -+ compatible = "mcp3008"; -+ reg = <2>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ spi0-0-present = <0>, "+0+8"; -+ spi0-1-present = <0>, "+1+9"; -+ spi1-0-present = <0>, "+2+10"; -+ spi1-1-present = <0>, "+3+11"; -+ spi1-2-present = <0>, "+4+12"; -+ spi2-0-present = <0>, "+5+13"; -+ spi2-1-present = <0>, "+6+14"; -+ spi2-2-present = <0>, "+7+15"; -+ spi0-0-speed = <&mcp3008_00>, "spi-max-frequency:0"; -+ spi0-1-speed = <&mcp3008_01>, "spi-max-frequency:0"; -+ spi1-0-speed = <&mcp3008_10>, "spi-max-frequency:0"; -+ spi1-1-speed = <&mcp3008_11>, "spi-max-frequency:0"; -+ spi1-2-speed = <&mcp3008_12>, "spi-max-frequency:0"; -+ spi2-0-speed = <&mcp3008_20>, "spi-max-frequency:0"; -+ spi2-1-speed = <&mcp3008_21>, "spi-max-frequency:0"; -+ spi2-2-speed = <&mcp3008_22>, "spi-max-frequency:0"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.9/0139-usb-dwc2-Avoid-suspending-if-we-re-in-gadget-mode-18.patch b/target/linux/brcm2708/patches-4.9/0139-usb-dwc2-Avoid-suspending-if-we-re-in-gadget-mode-18.patch deleted file mode 100644 index 1ed31c2d2eb1..000000000000 --- a/target/linux/brcm2708/patches-4.9/0139-usb-dwc2-Avoid-suspending-if-we-re-in-gadget-mode-18.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 2ca9749f5b4326dad52756eaf5e7865504b4d374 Mon Sep 17 00:00:00 2001 -From: ED6E0F17 -Date: Fri, 3 Feb 2017 14:52:42 +0000 -Subject: [PATCH] usb: dwc2: Avoid suspending if we're in gadget mode (#1825) - -I've found when booting HiKey with the usb gadget cable attached -if I then try to connect via adb, I get an infinite spew of: - -dwc2 f72c0000.usb: dwc2_hsotg_ep_sethalt(ep ffffffc0790ecb18 ep1out, 0) -dwc2 f72c0000.usb: dwc2_hsotg_ep_sethalt(ep ffffffc0790eca18 ep1in, 0) - -It seems that the usb autosuspend is suspending the bus shortly -after bootup when the gadget cable is attached. So when adbd -then tries to use the device, it doesn't work and it then tries -to restart it over and over via the ep_sethalt calls (via -FUNCTIONFS_CLEAR_HALT ioctl). - -Chen Yu suggested this patch to avoid suspending if we're -in device mode, and it avoids the problem. - -Cc: Wei Xu -Cc: Guodong Xu -Cc: Amit Pundir -Cc: Rob Herring -Cc: John Youn -Cc: Douglas Anderson -Cc: Chen Yu -Cc: Kishon Vijay Abraham I -Cc: Felipe Balbi -Cc: Greg Kroah-Hartman -Cc: linux-usb@vger.kernel.org -Suggested-by: Chen Yu -Signed-off-by: John Stultz -Signed-off-by: John Youn -Signed-off-by: Felipe Balbi ---- - drivers/usb/dwc2/hcd.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/usb/dwc2/hcd.c -+++ b/drivers/usb/dwc2/hcd.c -@@ -4365,6 +4365,9 @@ static int _dwc2_hcd_suspend(struct usb_ - if (!HCD_HW_ACCESSIBLE(hcd)) - goto unlock; - -+ if (hsotg->op_state == OTG_STATE_B_PERIPHERAL) -+ goto unlock; -+ - if (!hsotg->core_params->hibernation) - goto skip_power_saving; - diff --git a/target/linux/brcm2708/patches-4.9/0140-gpio_mem-Remove-unnecessary-dev_info-output-1830.patch b/target/linux/brcm2708/patches-4.9/0140-gpio_mem-Remove-unnecessary-dev_info-output-1830.patch deleted file mode 100644 index 8c2d162ccd51..000000000000 --- a/target/linux/brcm2708/patches-4.9/0140-gpio_mem-Remove-unnecessary-dev_info-output-1830.patch +++ /dev/null @@ -1,22 +0,0 @@ -From 5ff260778264ec512ea879cea455c86d515cc6ba Mon Sep 17 00:00:00 2001 -From: JamesH65 -Date: Mon, 6 Feb 2017 15:24:47 +0000 -Subject: [PATCH] gpio_mem: Remove unnecessary dev_info output (#1830) - -The open function was spamming syslog every time -called, so have removed call completely. ---- - drivers/char/broadcom/bcm2835-gpiomem.c | 2 -- - 1 file changed, 2 deletions(-) - ---- a/drivers/char/broadcom/bcm2835-gpiomem.c -+++ b/drivers/char/broadcom/bcm2835-gpiomem.c -@@ -76,8 +76,6 @@ static int bcm2835_gpiomem_open(struct i - int dev = iminor(inode); - int ret = 0; - -- dev_info(inst->dev, "gpiomem device opened."); -- - if (dev != DEVICE_MINOR) { - dev_err(inst->dev, "Unknown minor device: %d", dev); - ret = -ENXIO; diff --git a/target/linux/brcm2708/patches-4.9/0141-config-Enable-regulator-support.patch b/target/linux/brcm2708/patches-4.9/0141-config-Enable-regulator-support.patch deleted file mode 100644 index bcd766f4d3d4..000000000000 --- a/target/linux/brcm2708/patches-4.9/0141-config-Enable-regulator-support.patch +++ /dev/null @@ -1,33 +0,0 @@ -From e36583656552b7827a1b9d513ec39e95efa7ce8d Mon Sep 17 00:00:00 2001 -From: Matthias Reichl -Date: Sun, 22 Jan 2017 12:49:36 +0100 -Subject: [PATCH] config: Enable regulator support - -Signed-off-by: Matthias Reichl ---- - arch/arm/configs/bcm2709_defconfig | 2 ++ - arch/arm/configs/bcmrpi_defconfig | 2 ++ - 2 files changed, 4 insertions(+) - ---- a/arch/arm/configs/bcm2709_defconfig -+++ b/arch/arm/configs/bcm2709_defconfig -@@ -664,6 +664,8 @@ CONFIG_STMPE_SPI=y - CONFIG_MFD_ARIZONA_I2C=m - CONFIG_MFD_ARIZONA_SPI=m - CONFIG_MFD_WM5102=y -+CONFIG_REGULATOR=y -+CONFIG_REGULATOR_FIXED_VOLTAGE=m - CONFIG_MEDIA_SUPPORT=m - CONFIG_MEDIA_CAMERA_SUPPORT=y - CONFIG_MEDIA_ANALOG_TV_SUPPORT=y ---- a/arch/arm/configs/bcmrpi_defconfig -+++ b/arch/arm/configs/bcmrpi_defconfig -@@ -658,6 +658,8 @@ CONFIG_STMPE_SPI=y - CONFIG_MFD_ARIZONA_I2C=m - CONFIG_MFD_ARIZONA_SPI=m - CONFIG_MFD_WM5102=y -+CONFIG_REGULATOR=y -+CONFIG_REGULATOR_FIXED_VOLTAGE=m - CONFIG_MEDIA_SUPPORT=m - CONFIG_MEDIA_CAMERA_SUPPORT=y - CONFIG_MEDIA_ANALOG_TV_SUPPORT=y diff --git a/target/linux/brcm2708/patches-4.9/0142-BCM270x-DT-expose-3.3V-and-5V-system-rails.patch b/target/linux/brcm2708/patches-4.9/0142-BCM270x-DT-expose-3.3V-and-5V-system-rails.patch deleted file mode 100644 index 062e6e025616..000000000000 --- a/target/linux/brcm2708/patches-4.9/0142-BCM270x-DT-expose-3.3V-and-5V-system-rails.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 3e2cb84235e904f0c127d34705852ba7893ec9ae Mon Sep 17 00:00:00 2001 -From: Matthias Reichl -Date: Sun, 22 Jan 2017 12:49:36 +0100 -Subject: [PATCH] BCM270x DT: expose 3.3V and 5V system rails - -Signed-off-by: Matthias Reichl ---- - arch/arm/boot/dts/bcm270x.dtsi | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - ---- a/arch/arm/boot/dts/bcm270x.dtsi -+++ b/arch/arm/boot/dts/bcm270x.dtsi -@@ -138,4 +138,20 @@ - status = "disabled"; - }; - }; -+ -+ vdd_5v0_reg: fixedregulator_5v0 { -+ compatible = "regulator-fixed"; -+ regulator-name = "5v0"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ }; -+ -+ vdd_3v3_reg: fixedregulator_3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; - }; diff --git a/target/linux/brcm2708/patches-4.9/0143-BCM270x-DT-Consolidate-audio-card-overlays.patch b/target/linux/brcm2708/patches-4.9/0143-BCM270x-DT-Consolidate-audio-card-overlays.patch deleted file mode 100644 index 4c123b414c15..000000000000 --- a/target/linux/brcm2708/patches-4.9/0143-BCM270x-DT-Consolidate-audio-card-overlays.patch +++ /dev/null @@ -1,273 +0,0 @@ -From f134380c19eb38bc276d6d86fa575821c3493c60 Mon Sep 17 00:00:00 2001 -From: Matthias Reichl -Date: Sun, 22 Jan 2017 12:49:36 +0100 -Subject: [PATCH] BCM270x DT: Consolidate audio card overlays - -Reference 3.3V / 5V system rails instead of instantiating local -regulators. - -Add missing power supply properties for codecs where these are -required according to the DT bindings docs. - -Signed-off-by: Matthias Reichl ---- - .../arm/boot/dts/overlays/adau1977-adc-overlay.dts | 19 ++-------- - .../dts/overlays/akkordion-iqdacplus-overlay.dts | 3 ++ - .../dts/overlays/hifiberry-dacplus-overlay.dts | 3 ++ - .../boot/dts/overlays/hifiberry-digi-overlay.dts | 2 + - .../dts/overlays/hifiberry-digi-pro-overlay.dts | 2 + - arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts | 3 ++ - .../boot/dts/overlays/iqaudio-dacplus-overlay.dts | 3 ++ - .../overlays/iqaudio-digi-wm8804-audio-overlay.dts | 4 +- - .../arm/boot/dts/overlays/justboom-dac-overlay.dts | 3 ++ - .../boot/dts/overlays/justboom-digi-overlay.dts | 2 + - arch/arm/boot/dts/overlays/raspidac3-overlay.dts | 4 ++ - .../overlays/rra-digidac1-wm8741-audio-overlay.dts | 44 +++------------------- - 12 files changed, 36 insertions(+), 56 deletions(-) - ---- a/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts -+++ b/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts -@@ -6,19 +6,6 @@ - compatible = "brcm,bcm2708"; - - fragment@0 { -- target = <&soc>; -- -- __overlay__ { -- codec_supply: fixedregulator@0 { -- compatible = "regulator-fixed"; -- regulator-name = "AVDD"; -- regulator-min-microvolt = <3300000>; -- regulator-max-microvolt = <3300000>; -- }; -- }; -- }; -- -- fragment@1 { - target = <&i2c>; - - __overlay__ { -@@ -30,19 +17,19 @@ - compatible = "adi,adau1977"; - reg = <0x11>; - reset-gpios = <&gpio 5 0>; -- AVDD-supply = <&codec_supply>; -+ AVDD-supply = <&vdd_3v3_reg>; - }; - }; - }; - -- fragment@2 { -+ fragment@1 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - -- fragment@3 { -+ fragment@2 { - target = <&sound>; - __overlay__ { - compatible = "adi,adau1977-adc"; ---- a/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts -+++ b/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts -@@ -23,6 +23,9 @@ - #sound-dai-cells = <0>; - compatible = "ti,pcm5122"; - reg = <0x4c>; -+ AVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ CPVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; ---- a/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts -+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts -@@ -34,6 +34,9 @@ - compatible = "ti,pcm5122"; - reg = <0x4d>; - clocks = <&dacpro_osc>; -+ AVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ CPVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; ---- a/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts -+++ b/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts -@@ -23,6 +23,8 @@ - #sound-dai-cells = <0>; - compatible = "wlf,wm8804"; - reg = <0x3b>; -+ PVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; ---- a/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts -+++ b/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts -@@ -23,6 +23,8 @@ - #sound-dai-cells = <0>; - compatible = "wlf,wm8804"; - reg = <0x3b>; -+ PVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; ---- a/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts -+++ b/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts -@@ -23,6 +23,9 @@ - #sound-dai-cells = <0>; - compatible = "ti,pcm5122"; - reg = <0x4c>; -+ AVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ CPVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; ---- a/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts -+++ b/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts -@@ -23,6 +23,9 @@ - #sound-dai-cells = <0>; - compatible = "ti,pcm5122"; - reg = <0x4c>; -+ AVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ CPVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; ---- a/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts -@@ -24,8 +24,8 @@ - compatible = "wlf,wm8804"; - reg = <0x3b>; - status = "okay"; -- // DVDD-supply = <®_3v3>; -- // PVDD-supply = <®_3v3>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ PVDD-supply = <&vdd_3v3_reg>; - }; - }; - }; ---- a/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts -+++ b/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts -@@ -23,6 +23,9 @@ - #sound-dai-cells = <0>; - compatible = "ti,pcm5122"; - reg = <0x4d>; -+ AVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ CPVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; ---- a/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts -+++ b/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts -@@ -23,6 +23,8 @@ - #sound-dai-cells = <0>; - compatible = "wlf,wm8804"; - reg = <0x3b>; -+ PVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; ---- a/arch/arm/boot/dts/overlays/raspidac3-overlay.dts -+++ b/arch/arm/boot/dts/overlays/raspidac3-overlay.dts -@@ -23,12 +23,16 @@ - #sound-dai-cells = <0>; - compatible = "ti,pcm5122"; - reg = <0x4c>; -+ AVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ CPVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - - tpa6130a2: tpa6130a2@60 { - compatible = "ti,tpa6130a2"; - reg = <0x60>; -+ Vdd-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; ---- a/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts -+++ b/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts -@@ -6,45 +6,13 @@ - compatible = "brcm,bcm2708"; - - fragment@0 { -- target-path = "/"; -- __overlay__ { -- aliases { -- ldo0 = &ldo0; -- ldo1 = &ldo1; -- }; -- }; -- }; -- -- fragment@1 { -- target-path = "/soc"; -- __overlay__ { -- -- ldo1: ldo1 { -- compatible = "regulator-fixed"; -- regulator-name = "DC_5V"; -- regulator-min-microvolt = <5000000>; -- regulator-max-microvolt = <5000000>; -- regulator-always-on; -- }; -- -- ldo0: ldo0 { -- compatible = "regulator-fixed"; -- regulator-name = "DC_3V3"; -- regulator-min-microvolt = <3300000>; -- regulator-max-microvolt = <3300000>; -- regulator-always-on; -- }; -- }; -- }; -- -- fragment@2 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - -- fragment@3 { -+ fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; -@@ -56,21 +24,21 @@ - compatible = "wlf,wm8804"; - reg = <0x3b>; - status = "okay"; -- PVDD-supply = <&ldo0>; -- DVDD-supply = <&ldo0>; -+ PVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; - }; - - wm8742: wm8741@1a { - compatible = "wlf,wm8741"; - reg = <0x1a>; - status = "okay"; -- AVDD-supply = <&ldo1>; -- DVDD-supply = <&ldo0>; -+ AVDD-supply = <&vdd_5v0_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; - }; - }; - }; - -- fragment@4 { -+ fragment@2 { - target = <&sound>; - __overlay__ { - compatible = "rra,digidac1-soundcard"; diff --git a/target/linux/brcm2708/patches-4.9/0144-ASoC-Add-driver-for-Cirrus-Logic-Audio-Card.patch b/target/linux/brcm2708/patches-4.9/0144-ASoC-Add-driver-for-Cirrus-Logic-Audio-Card.patch deleted file mode 100644 index 863d107541d5..000000000000 --- a/target/linux/brcm2708/patches-4.9/0144-ASoC-Add-driver-for-Cirrus-Logic-Audio-Card.patch +++ /dev/null @@ -1,1238 +0,0 @@ -From 01c84e09a331a3b4c29c1cd5ce364c91577c7cea Mon Sep 17 00:00:00 2001 -From: Matthias Reichl -Date: Sun, 22 Jan 2017 12:49:37 +0100 -Subject: [PATCH] ASoC: Add driver for Cirrus Logic Audio Card - -Note: due to problems with deferred probing of regulators -the following softdep should be added to a modprobe.d file - -softdep arizona-spi pre: arizona-ldo1 - -Signed-off-by: Matthias Reichl ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 6 + - .../dts/overlays/rpi-cirrus-wm5102-overlay.dts | 146 +++ - sound/soc/bcm/Kconfig | 9 + - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/rpi-cirrus.c | 1003 ++++++++++++++++++++ - 6 files changed, 1167 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts - create mode 100644 sound/soc/bcm/rpi-cirrus.c - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -68,6 +68,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - qca7000.dtbo \ - raspidac3.dtbo \ - rpi-backlight.dtbo \ -+ rpi-cirrus-wm5102.dtbo \ - rpi-dac.dtbo \ - rpi-display.dtbo \ - rpi-ft5406.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -995,6 +995,12 @@ Load: dtoverlay=rpi-backlight - Params: - - -+Name: rpi-cirrus-wm5102 -+Info: Configures the Cirrus Logic Audio Card -+Load: dtoverlay=rpi-cirrus-wm5102 -+Params: -+ -+ - Name: rpi-dac - Info: Configures the RPi DAC audio card - Load: dtoverlay=rpi-dac ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts -@@ -0,0 +1,146 @@ -+// Definitions for the Cirrus Logic Audio Card -+/dts-v1/; -+/plugin/; -+#include -+#include -+#include -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ wlf_pins: wlf_pins { -+ brcm,pins = <17 22 27 8>; -+ brcm,function = < -+ BCM2835_FSEL_GPIO_OUT -+ BCM2835_FSEL_GPIO_OUT -+ BCM2835_FSEL_GPIO_IN -+ BCM2835_FSEL_GPIO_OUT -+ >; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "/"; -+ __overlay__ { -+ rpi_cirrus_reg_1v8: rpi_cirrus_reg_1v8 { -+ compatible = "regulator-fixed"; -+ regulator-name = "RPi-Cirrus 1v8"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ regulator-always-on; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&spi0>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ spidev@0{ -+ status = "disabled"; -+ }; -+ -+ spidev@1{ -+ status = "disabled"; -+ }; -+ -+ wm5102@1{ -+ compatible = "wlf,wm5102"; -+ reg = <1>; -+ -+ spi-max-frequency = <500000>; -+ -+ interrupt-parent = <&gpio>; -+ interrupts = <27 8>; -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ LDOVDD-supply = <&rpi_cirrus_reg_1v8>; -+ AVDD-supply = <&rpi_cirrus_reg_1v8>; -+ DBVDD1-supply = <&rpi_cirrus_reg_1v8>; -+ DBVDD2-supply = <&vdd_3v3_reg>; -+ DBVDD3-supply = <&vdd_3v3_reg>; -+ CPVDD-supply = <&rpi_cirrus_reg_1v8>; -+ SPKVDDL-supply = <&vdd_5v0_reg>; -+ SPKVDDR-supply = <&vdd_5v0_reg>; -+ DCVDD-supply = <&arizona_ldo1>; -+ -+ wlf,reset = <&gpio 17 GPIO_ACTIVE_HIGH>; -+ wlf,ldoena = <&gpio 22 GPIO_ACTIVE_HIGH>; -+ wlf,gpio-defaults = < -+ ARIZONA_GP_DEFAULT -+ ARIZONA_GP_DEFAULT -+ ARIZONA_GP_DEFAULT -+ ARIZONA_GP_DEFAULT -+ ARIZONA_GP_DEFAULT -+ >; -+ wlf,micd-configs = <0 1 0>; -+ wlf,dmic-ref = < -+ ARIZONA_DMIC_MICVDD -+ ARIZONA_DMIC_MICBIAS2 -+ ARIZONA_DMIC_MICVDD -+ ARIZONA_DMIC_MICVDD -+ >; -+ wlf,inmode = < -+ ARIZONA_INMODE_DIFF -+ ARIZONA_INMODE_DMIC -+ ARIZONA_INMODE_SE -+ ARIZONA_INMODE_DIFF -+ >; -+ status = "okay"; -+ -+ arizona_ldo1: ldo1 { -+ regulator-name = "LDO1"; -+ // default constraints as in -+ // arizona-ldo1.c -+ regulator-min-microvolt = <1200000>; -+ regulator-max-microvolt = <1800000>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&i2c1>; -+ __overlay__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ wm8804@3b { -+ compatible = "wlf,wm8804"; -+ reg = <0x3b>; -+ status = "okay"; -+ PVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ wlf,reset-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ }; -+ -+ fragment@5 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "wlf,rpi-cirrus"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -45,6 +45,15 @@ config SND_BCM2708_SOC_HIFIBERRY_AMP - help - Say Y or M if you want to add support for the HifiBerry Amp amplifier board. - -+config SND_BCM2708_SOC_RPI_CIRRUS -+ tristate "Support for Cirrus Logic Audio Card" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_WM5102 -+ select SND_SOC_WM8804 -+ help -+ Say Y or M if you want to add support for the Wolfson and -+ Cirrus Logic audio cards. -+ - config SND_BCM2708_SOC_RPI_DAC - tristate "Support for RPi-DAC" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -16,6 +16,7 @@ snd-soc-hifiberry-dacplus-objs := hifibe - snd-soc-hifiberry-digi-objs := hifiberry_digi.o - snd-soc-justboom-dac-objs := justboom-dac.o - snd-soc-justboom-digi-objs := justboom-digi.o -+snd-soc-rpi-cirrus-objs := rpi-cirrus.o - snd-soc-rpi-dac-objs := rpi-dac.o - snd-soc-rpi-proto-objs := rpi-proto.o - snd-soc-iqaudio-dac-objs := iqaudio-dac.o -@@ -34,6 +35,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_D - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o - obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o - obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI) += snd-soc-justboom-digi.o -+obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) += snd-soc-rpi-cirrus.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o - obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o - obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o ---- /dev/null -+++ b/sound/soc/bcm/rpi-cirrus.c -@@ -0,0 +1,1003 @@ -+/* -+ * ASoC machine driver for Cirrus Logic Audio Card -+ * (with WM5102 and WM8804 codecs) -+ * -+ * Copyright 2015-2017 Matthias Reichl -+ * -+ * Based on rpi-cirrus-sound-pi driver (c) Wolfson / Cirrus Logic Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include "../codecs/wm5102.h" -+#include "../codecs/wm8804.h" -+ -+#define WM8804_CLKOUT_HZ 12000000 -+ -+#define RPI_CIRRUS_DEFAULT_RATE 44100 -+#define WM5102_MAX_SYSCLK_1 49152000 /* max sysclk for 4K family */ -+#define WM5102_MAX_SYSCLK_2 45158400 /* max sysclk for 11.025K family */ -+ -+static inline unsigned int calc_sysclk(unsigned int rate) -+{ -+ return (rate % 4000) ? WM5102_MAX_SYSCLK_2 : WM5102_MAX_SYSCLK_1; -+} -+ -+enum { -+ DAI_WM5102 = 0, -+ DAI_WM8804, -+}; -+ -+struct rpi_cirrus_priv { -+ /* mutex for synchronzing FLL1 access with DAPM */ -+ struct mutex lock; -+ unsigned int card_rate; -+ int sync_path_enable; -+ int fll1_freq; /* negative means RefClock in spdif rx case */ -+ -+ /* track hw params/free for substreams */ -+ unsigned int params_set; -+ unsigned int min_rate_idx, max_rate_idx; -+ unsigned char iec958_status[4]; -+}; -+ -+/* helper functions */ -+static inline struct snd_soc_pcm_runtime *get_wm5102_runtime( -+ struct snd_soc_card *card) { -+ return snd_soc_get_pcm_runtime(card, card->dai_link[DAI_WM5102].name); -+} -+ -+static inline struct snd_soc_pcm_runtime *get_wm8804_runtime( -+ struct snd_soc_card *card) { -+ return snd_soc_get_pcm_runtime(card, card->dai_link[DAI_WM8804].name); -+} -+ -+ -+struct rate_info { -+ unsigned int value; -+ char *text; -+}; -+ -+static struct rate_info min_rates[] = { -+ { 0, "off"}, -+ { 32000, "32kHz"}, -+ { 44100, "44.1kHz"} -+}; -+ -+#define NUM_MIN_RATES ARRAY_SIZE(min_rates) -+ -+static int rpi_cirrus_min_rate_info(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_info *uinfo) -+{ -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; -+ uinfo->count = 1; -+ uinfo->value.enumerated.items = NUM_MIN_RATES; -+ -+ if (uinfo->value.enumerated.item >= NUM_MIN_RATES) -+ uinfo->value.enumerated.item = NUM_MIN_RATES - 1; -+ strcpy(uinfo->value.enumerated.name, -+ min_rates[uinfo->value.enumerated.item].text); -+ return 0; -+} -+ -+static int rpi_cirrus_min_rate_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); -+ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); -+ -+ ucontrol->value.enumerated.item[0] = priv->min_rate_idx; -+ return 0; -+} -+ -+static int rpi_cirrus_min_rate_put(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); -+ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); -+ int changed = 0; -+ -+ if (priv->min_rate_idx != ucontrol->value.enumerated.item[0]) { -+ changed = 1; -+ priv->min_rate_idx = ucontrol->value.enumerated.item[0]; -+ } -+ -+ return changed; -+} -+ -+static struct rate_info max_rates[] = { -+ { 0, "off"}, -+ { 48000, "48kHz"}, -+ { 96000, "96kHz"} -+}; -+ -+#define NUM_MAX_RATES ARRAY_SIZE(max_rates) -+ -+static int rpi_cirrus_max_rate_info(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_info *uinfo) -+{ -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; -+ uinfo->count = 1; -+ uinfo->value.enumerated.items = NUM_MAX_RATES; -+ if (uinfo->value.enumerated.item >= NUM_MAX_RATES) -+ uinfo->value.enumerated.item = NUM_MAX_RATES - 1; -+ strcpy(uinfo->value.enumerated.name, -+ max_rates[uinfo->value.enumerated.item].text); -+ return 0; -+} -+ -+static int rpi_cirrus_max_rate_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); -+ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); -+ -+ ucontrol->value.enumerated.item[0] = priv->max_rate_idx; -+ return 0; -+} -+ -+static int rpi_cirrus_max_rate_put(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); -+ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); -+ int changed = 0; -+ -+ if (priv->max_rate_idx != ucontrol->value.enumerated.item[0]) { -+ changed = 1; -+ priv->max_rate_idx = ucontrol->value.enumerated.item[0]; -+ } -+ -+ return changed; -+} -+ -+static int rpi_cirrus_spdif_info(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_info *uinfo) -+{ -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; -+ uinfo->count = 1; -+ return 0; -+} -+ -+static int rpi_cirrus_spdif_playback_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); -+ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); -+ int i; -+ -+ for (i = 0; i < 4; i++) -+ ucontrol->value.iec958.status[i] = priv->iec958_status[i]; -+ -+ return 0; -+} -+ -+static int rpi_cirrus_spdif_playback_put(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); -+ struct snd_soc_codec *wm8804_codec = get_wm8804_runtime(card)->codec; -+ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); -+ unsigned char *stat = priv->iec958_status; -+ unsigned char *ctrl_stat = ucontrol->value.iec958.status; -+ unsigned int mask; -+ int i, changed = 0; -+ -+ for (i = 0; i < 4; i++) { -+ mask = (i == 3) ? 0x3f : 0xff; -+ if ((ctrl_stat[i] & mask) != (stat[i] & mask)) { -+ changed = 1; -+ stat[i] = ctrl_stat[i] & mask; -+ snd_soc_update_bits(wm8804_codec, -+ WM8804_SPDTX1 + i, mask, stat[i]); -+ } -+ } -+ -+ return changed; -+} -+ -+static int rpi_cirrus_spdif_mask_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ ucontrol->value.iec958.status[0] = 0xff; -+ ucontrol->value.iec958.status[1] = 0xff; -+ ucontrol->value.iec958.status[2] = 0xff; -+ ucontrol->value.iec958.status[3] = 0x3f; -+ -+ return 0; -+} -+ -+static int rpi_cirrus_spdif_capture_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); -+ struct snd_soc_codec *wm8804_codec = get_wm8804_runtime(card)->codec; -+ unsigned int mask; -+ int i; -+ -+ for (i = 0; i < 4; i++) { -+ mask = (i == 3) ? 0x3f : 0xff; -+ ucontrol->value.iec958.status[i] = -+ snd_soc_read(wm8804_codec, WM8804_RXCHAN1 + i) & mask; -+ } -+ -+ return 0; -+} -+ -+#define SPDIF_FLAG_CTRL(desc, reg, bit, invert) \ -+{ \ -+ .access = SNDRV_CTL_ELEM_ACCESS_READ \ -+ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ -+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ -+ .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE) \ -+ desc " Flag", \ -+ .info = snd_ctl_boolean_mono_info, \ -+ .get = rpi_cirrus_spdif_status_flag_get, \ -+ .private_value = \ -+ (bit) | ((reg) << 8) | ((invert) << 16) \ -+} -+ -+static int rpi_cirrus_spdif_status_flag_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); -+ struct snd_soc_codec *wm8804_codec = get_wm8804_runtime(card)->codec; -+ -+ unsigned int bit = kcontrol->private_value & 0xff; -+ unsigned int reg = (kcontrol->private_value >> 8) & 0xff; -+ unsigned int invert = (kcontrol->private_value >> 16) & 0xff; -+ -+ bool flag = snd_soc_read(wm8804_codec, reg) & (1 << bit); -+ -+ ucontrol->value.integer.value[0] = invert ? !flag : flag; -+ -+ return 0; -+} -+ -+static const char * const recovered_frequency_texts[] = { -+ "176.4/192 kHz", -+ "88.2/96 kHz", -+ "44.1/48 kHz", -+ "32 kHz" -+}; -+ -+#define NUM_RECOVERED_FREQUENCIES \ -+ ARRAY_SIZE(recovered_frequency_texts) -+ -+static int rpi_cirrus_recovered_frequency_info(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_info *uinfo) -+{ -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; -+ uinfo->count = 1; -+ uinfo->value.enumerated.items = NUM_RECOVERED_FREQUENCIES; -+ if (uinfo->value.enumerated.item >= NUM_RECOVERED_FREQUENCIES) -+ uinfo->value.enumerated.item = NUM_RECOVERED_FREQUENCIES - 1; -+ strcpy(uinfo->value.enumerated.name, -+ recovered_frequency_texts[uinfo->value.enumerated.item]); -+ return 0; -+} -+ -+static int rpi_cirrus_recovered_frequency_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); -+ struct snd_soc_codec *wm8804_codec = get_wm8804_runtime(card)->codec; -+ -+ ucontrol->value.enumerated.item[0] = -+ (snd_soc_read(wm8804_codec, WM8804_SPDSTAT) >> 4) & 0x03; -+ return 0; -+} -+ -+static const struct snd_kcontrol_new rpi_cirrus_controls[] = { -+ { -+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, -+ .name = "Min Sample Rate", -+ .info = rpi_cirrus_min_rate_info, -+ .get = rpi_cirrus_min_rate_get, -+ .put = rpi_cirrus_min_rate_put, -+ }, -+ { -+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, -+ .name = "Max Sample Rate", -+ .info = rpi_cirrus_max_rate_info, -+ .get = rpi_cirrus_max_rate_get, -+ .put = rpi_cirrus_max_rate_put, -+ }, -+ { -+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, -+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), -+ .info = rpi_cirrus_spdif_info, -+ .get = rpi_cirrus_spdif_playback_get, -+ .put = rpi_cirrus_spdif_playback_put, -+ }, -+ { -+ .access = SNDRV_CTL_ELEM_ACCESS_READ -+ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, -+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, -+ .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, DEFAULT), -+ .info = rpi_cirrus_spdif_info, -+ .get = rpi_cirrus_spdif_capture_get, -+ }, -+ { -+ .access = SNDRV_CTL_ELEM_ACCESS_READ, -+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, -+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK), -+ .info = rpi_cirrus_spdif_info, -+ .get = rpi_cirrus_spdif_mask_get, -+ }, -+ { -+ .access = SNDRV_CTL_ELEM_ACCESS_READ -+ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, -+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, -+ .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE) -+ "Recovered Frequency", -+ .info = rpi_cirrus_recovered_frequency_info, -+ .get = rpi_cirrus_recovered_frequency_get, -+ }, -+ SPDIF_FLAG_CTRL("Audio", WM8804_SPDSTAT, 0, 1), -+ SPDIF_FLAG_CTRL("Non-PCM", WM8804_SPDSTAT, 1, 0), -+ SPDIF_FLAG_CTRL("Copyright", WM8804_SPDSTAT, 2, 1), -+ SPDIF_FLAG_CTRL("De-Emphasis", WM8804_SPDSTAT, 3, 0), -+ SPDIF_FLAG_CTRL("Lock", WM8804_SPDSTAT, 6, 1), -+ SPDIF_FLAG_CTRL("Invalid", WM8804_INTSTAT, 1, 0), -+ SPDIF_FLAG_CTRL("TransErr", WM8804_INTSTAT, 3, 0), -+}; -+ -+static const char * const linein_micbias_texts[] = { -+ "off", "on", -+}; -+ -+static SOC_ENUM_SINGLE_VIRT_DECL(linein_micbias_enum, -+ linein_micbias_texts); -+ -+static const struct snd_kcontrol_new linein_micbias_mux = -+ SOC_DAPM_ENUM("Route", linein_micbias_enum); -+ -+static int rpi_cirrus_spdif_rx_enable_event(struct snd_soc_dapm_widget *w, -+ struct snd_kcontrol *kcontrol, int event); -+ -+const struct snd_soc_dapm_widget rpi_cirrus_dapm_widgets[] = { -+ SND_SOC_DAPM_MIC("DMIC", NULL), -+ SND_SOC_DAPM_MIC("Headset Mic", NULL), -+ SND_SOC_DAPM_INPUT("Line Input"), -+ SND_SOC_DAPM_MIC("Line Input with Micbias", NULL), -+ SND_SOC_DAPM_MUX("Line Input Micbias", SND_SOC_NOPM, 0, 0, -+ &linein_micbias_mux), -+ SND_SOC_DAPM_INPUT("dummy SPDIF in"), -+ SND_SOC_DAPM_PGA_E("dummy SPDIFRX", SND_SOC_NOPM, 0, 0, NULL, 0, -+ rpi_cirrus_spdif_rx_enable_event, -+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), -+ SND_SOC_DAPM_INPUT("Dummy Input"), -+ SND_SOC_DAPM_OUTPUT("Dummy Output"), -+}; -+ -+const struct snd_soc_dapm_route rpi_cirrus_dapm_routes[] = { -+ { "IN1L", NULL, "Headset Mic" }, -+ { "IN1R", NULL, "Headset Mic" }, -+ { "Headset Mic", NULL, "MICBIAS1" }, -+ -+ { "IN2L", NULL, "DMIC" }, -+ { "IN2R", NULL, "DMIC" }, -+ { "DMIC", NULL, "MICBIAS2" }, -+ -+ { "IN3L", NULL, "Line Input Micbias" }, -+ { "IN3R", NULL, "Line Input Micbias" }, -+ -+ { "Line Input Micbias", "off", "Line Input" }, -+ { "Line Input Micbias", "on", "Line Input with Micbias" }, -+ -+ /* Make sure MICVDD is enabled, otherwise we get noise */ -+ { "Line Input", NULL, "MICVDD" }, -+ { "Line Input with Micbias", NULL, "MICBIAS3" }, -+ -+ /* Dummy routes to check whether SPDIF RX is enabled or not */ -+ {"dummy SPDIFRX", NULL, "dummy SPDIF in"}, -+ {"AIFTX", NULL, "dummy SPDIFRX"}, -+ -+ /* -+ * Dummy routes to keep wm5102 from staying off on -+ * playback/capture if all mixers are off. -+ */ -+ { "Dummy Output", NULL, "AIF1RX1" }, -+ { "Dummy Output", NULL, "AIF1RX2" }, -+ { "AIF1TX1", NULL, "Dummy Input" }, -+ { "AIF1TX2", NULL, "Dummy Input" }, -+}; -+ -+static int rpi_cirrus_clear_flls(struct snd_soc_card *card, -+ struct snd_soc_codec *wm5102_codec) { -+ -+ int ret1, ret2; -+ -+ ret1 = snd_soc_codec_set_pll(wm5102_codec, -+ WM5102_FLL1, ARIZONA_FLL_SRC_NONE, 0, 0); -+ ret2 = snd_soc_codec_set_pll(wm5102_codec, -+ WM5102_FLL1_REFCLK, ARIZONA_FLL_SRC_NONE, 0, 0); -+ -+ if (ret1) { -+ dev_warn(card->dev, -+ "setting FLL1 to zero failed: %d\n", ret1); -+ return ret1; -+ } -+ if (ret2) { -+ dev_warn(card->dev, -+ "setting FLL1_REFCLK to zero failed: %d\n", ret2); -+ return ret2; -+ } -+ return 0; -+} -+ -+static int rpi_cirrus_set_fll(struct snd_soc_card *card, -+ struct snd_soc_codec *wm5102_codec, unsigned int clk_freq) -+{ -+ int ret = snd_soc_codec_set_pll(wm5102_codec, -+ WM5102_FLL1, -+ ARIZONA_CLK_SRC_MCLK1, -+ WM8804_CLKOUT_HZ, -+ clk_freq); -+ if (ret) -+ dev_err(card->dev, "Failed to set FLL1 to %d: %d\n", -+ clk_freq, ret); -+ -+ usleep_range(1000, 2000); -+ return ret; -+} -+ -+static int rpi_cirrus_set_fll_refclk(struct snd_soc_card *card, -+ struct snd_soc_codec *wm5102_codec, -+ unsigned int clk_freq, unsigned int aif2_freq) -+{ -+ int ret = snd_soc_codec_set_pll(wm5102_codec, -+ WM5102_FLL1_REFCLK, -+ ARIZONA_CLK_SRC_MCLK1, -+ WM8804_CLKOUT_HZ, -+ clk_freq); -+ if (ret) { -+ dev_err(card->dev, -+ "Failed to set FLL1_REFCLK to %d: %d\n", -+ clk_freq, ret); -+ return ret; -+ } -+ -+ ret = snd_soc_codec_set_pll(wm5102_codec, -+ WM5102_FLL1, -+ ARIZONA_CLK_SRC_AIF2BCLK, -+ aif2_freq, clk_freq); -+ if (ret) -+ dev_err(card->dev, -+ "Failed to set FLL1 with Sync Clock %d to %d: %d\n", -+ aif2_freq, clk_freq, ret); -+ -+ usleep_range(1000, 2000); -+ return ret; -+} -+ -+static int rpi_cirrus_spdif_rx_enable_event(struct snd_soc_dapm_widget *w, -+ struct snd_kcontrol *kcontrol, int event) -+{ -+ struct snd_soc_card *card = w->dapm->card; -+ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); -+ struct snd_soc_codec *wm5102_codec = get_wm5102_runtime(card)->codec; -+ -+ unsigned int clk_freq, aif2_freq; -+ int ret = 0; -+ -+ switch (event) { -+ case SND_SOC_DAPM_POST_PMU: -+ mutex_lock(&priv->lock); -+ -+ /* Enable sync path in case of SPDIF capture use case */ -+ -+ clk_freq = calc_sysclk(priv->card_rate); -+ aif2_freq = 64 * priv->card_rate; -+ -+ dev_dbg(card->dev, -+ "spdif_rx: changing FLL1 to use Ref Clock clk: %d spdif: %d\n", -+ clk_freq, aif2_freq); -+ -+ ret = rpi_cirrus_clear_flls(card, wm5102_codec); -+ if (ret) { -+ dev_err(card->dev, "spdif_rx: failed to clear FLLs\n"); -+ goto out; -+ } -+ -+ ret = rpi_cirrus_set_fll_refclk(card, wm5102_codec, -+ clk_freq, aif2_freq); -+ -+ if (ret) { -+ dev_err(card->dev, "spdif_rx: failed to set FLLs\n"); -+ goto out; -+ } -+ -+ /* set to negative to indicate we're doing spdif rx */ -+ priv->fll1_freq = -clk_freq; -+ priv->sync_path_enable = 1; -+ break; -+ -+ case SND_SOC_DAPM_POST_PMD: -+ mutex_lock(&priv->lock); -+ priv->sync_path_enable = 0; -+ break; -+ -+ default: -+ return 0; -+ } -+ -+out: -+ mutex_unlock(&priv->lock); -+ return ret; -+} -+ -+static int rpi_cirrus_set_bias_level(struct snd_soc_card *card, -+ struct snd_soc_dapm_context *dapm, -+ enum snd_soc_bias_level level) -+{ -+ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); -+ struct snd_soc_pcm_runtime *wm5102_runtime = get_wm5102_runtime(card); -+ struct snd_soc_codec *wm5102_codec = wm5102_runtime->codec; -+ -+ int ret = 0; -+ unsigned int clk_freq; -+ -+ if (dapm->dev != wm5102_runtime->codec_dai->dev) -+ return 0; -+ -+ switch (level) { -+ case SND_SOC_BIAS_PREPARE: -+ if (dapm->bias_level == SND_SOC_BIAS_ON) -+ break; -+ -+ mutex_lock(&priv->lock); -+ -+ if (!priv->sync_path_enable) { -+ clk_freq = calc_sysclk(priv->card_rate); -+ -+ dev_dbg(card->dev, -+ "set_bias: changing FLL1 from %d to %d\n", -+ priv->fll1_freq, clk_freq); -+ -+ ret = rpi_cirrus_set_fll(card, wm5102_codec, clk_freq); -+ if (ret) -+ dev_err(card->dev, -+ "set_bias: Failed to set FLL1\n"); -+ else -+ priv->fll1_freq = clk_freq; -+ } -+ mutex_unlock(&priv->lock); -+ break; -+ default: -+ break; -+ } -+ -+ return ret; -+} -+ -+static int rpi_cirrus_set_bias_level_post(struct snd_soc_card *card, -+ struct snd_soc_dapm_context *dapm, -+ enum snd_soc_bias_level level) -+{ -+ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); -+ struct snd_soc_pcm_runtime *wm5102_runtime = get_wm5102_runtime(card); -+ struct snd_soc_codec *wm5102_codec = wm5102_runtime->codec; -+ -+ if (dapm->dev != wm5102_runtime->codec_dai->dev) -+ return 0; -+ -+ switch (level) { -+ case SND_SOC_BIAS_STANDBY: -+ mutex_lock(&priv->lock); -+ -+ dev_dbg(card->dev, -+ "set_bias_post: changing FLL1 from %d to off\n", -+ priv->fll1_freq); -+ -+ if (rpi_cirrus_clear_flls(card, wm5102_codec)) -+ dev_err(card->dev, -+ "set_bias_post: failed to clear FLLs\n"); -+ else -+ priv->fll1_freq = 0; -+ -+ mutex_unlock(&priv->lock); -+ -+ break; -+ default: -+ break; -+ } -+ -+ return 0; -+} -+ -+static int rpi_cirrus_set_wm8804_pll(struct snd_soc_card *card, -+ struct snd_soc_dai *wm8804_dai, unsigned int rate) -+{ -+ int ret; -+ -+ /* use 256fs */ -+ unsigned int clk_freq = rate * 256; -+ -+ ret = snd_soc_dai_set_pll(wm8804_dai, 0, 0, -+ WM8804_CLKOUT_HZ, clk_freq); -+ if (ret) { -+ dev_err(card->dev, -+ "Failed to set WM8804 PLL to %d: %d\n", clk_freq, ret); -+ return ret; -+ } -+ -+ /* Set MCLK as PLL Output */ -+ ret = snd_soc_dai_set_sysclk(wm8804_dai, -+ WM8804_TX_CLKSRC_PLL, clk_freq, 0); -+ if (ret) { -+ dev_err(card->dev, -+ "Failed to set MCLK as PLL Output: %d\n", ret); -+ return ret; -+ } -+ -+ return ret; -+} -+ -+static int rpi_cirrus_startup(struct snd_pcm_substream *substream) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_card *card = rtd->card; -+ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); -+ unsigned int min_rate = min_rates[priv->min_rate_idx].value; -+ unsigned int max_rate = max_rates[priv->max_rate_idx].value; -+ -+ if (min_rate || max_rate) { -+ if (max_rate == 0) -+ max_rate = UINT_MAX; -+ -+ dev_dbg(card->dev, -+ "startup: limiting rate to %u-%u\n", -+ min_rate, max_rate); -+ -+ snd_pcm_hw_constraint_minmax(substream->runtime, -+ SNDRV_PCM_HW_PARAM_RATE, min_rate, max_rate); -+ } -+ -+ return 0; -+} -+ -+static struct snd_soc_pcm_stream rpi_cirrus_dai_link2_params = { -+ .formats = SNDRV_PCM_FMTBIT_S24_LE, -+ .channels_min = 2, -+ .channels_max = 2, -+ .rate_min = RPI_CIRRUS_DEFAULT_RATE, -+ .rate_max = RPI_CIRRUS_DEFAULT_RATE, -+}; -+ -+static int rpi_cirrus_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_card *card = rtd->card; -+ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); -+ struct snd_soc_dai *bcm_i2s_dai = rtd->cpu_dai; -+ struct snd_soc_codec *wm5102_codec = rtd->codec; -+ struct snd_soc_dai *wm8804_dai = get_wm8804_runtime(card)->codec_dai; -+ -+ int ret; -+ -+ unsigned int width = snd_pcm_format_physical_width( -+ params_format(params)); -+ unsigned int rate = params_rate(params); -+ unsigned int clk_freq = calc_sysclk(rate); -+ -+ mutex_lock(&priv->lock); -+ -+ dev_dbg(card->dev, "hw_params: setting rate to %d\n", rate); -+ -+ ret = snd_soc_dai_set_bclk_ratio(bcm_i2s_dai, 2 * width); -+ if (ret) { -+ dev_err(card->dev, "set_bclk_ratio failed: %d\n", ret); -+ goto out; -+ } -+ -+ ret = snd_soc_dai_set_tdm_slot(rtd->codec_dai, 0x03, 0x03, 2, width); -+ if (ret) { -+ dev_err(card->dev, "set_tdm_slot failed: %d\n", ret); -+ goto out; -+ } -+ -+ /* WM8804 supports sample rates from 32k only */ -+ if (rate >= 32000) { -+ ret = rpi_cirrus_set_wm8804_pll(card, wm8804_dai, rate); -+ if (ret) -+ goto out; -+ } -+ -+ ret = snd_soc_codec_set_sysclk(wm5102_codec, -+ ARIZONA_CLK_SYSCLK, -+ ARIZONA_CLK_SRC_FLL1, -+ clk_freq, -+ SND_SOC_CLOCK_IN); -+ if (ret) { -+ dev_err(card->dev, "Failed to set SYSCLK: %d\n", ret); -+ goto out; -+ } -+ -+ if ((priv->fll1_freq > 0) && (priv->fll1_freq != clk_freq)) { -+ dev_dbg(card->dev, -+ "hw_params: changing FLL1 from %d to %d\n", -+ priv->fll1_freq, clk_freq); -+ -+ if (rpi_cirrus_clear_flls(card, wm5102_codec)) { -+ dev_err(card->dev, "hw_params: failed to clear FLLs\n"); -+ goto out; -+ } -+ -+ if (rpi_cirrus_set_fll(card, wm5102_codec, clk_freq)) { -+ dev_err(card->dev, "hw_params: failed to set FLL\n"); -+ goto out; -+ } -+ -+ priv->fll1_freq = clk_freq; -+ } -+ -+ priv->card_rate = rate; -+ rpi_cirrus_dai_link2_params.rate_min = rate; -+ rpi_cirrus_dai_link2_params.rate_max = rate; -+ -+ priv->params_set |= 1 << substream->stream; -+ -+out: -+ mutex_unlock(&priv->lock); -+ -+ return ret; -+} -+ -+static int rpi_cirrus_hw_free(struct snd_pcm_substream *substream) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_card *card = rtd->card; -+ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); -+ struct snd_soc_codec *wm5102_codec = rtd->codec; -+ int ret; -+ unsigned int old_params_set = priv->params_set; -+ -+ priv->params_set &= ~(1 << substream->stream); -+ -+ /* disable sysclk if this was the last open stream */ -+ if (priv->params_set == 0 && old_params_set) { -+ dev_dbg(card->dev, -+ "hw_free: Setting SYSCLK to Zero\n"); -+ -+ ret = snd_soc_codec_set_sysclk(wm5102_codec, -+ ARIZONA_CLK_SYSCLK, -+ ARIZONA_CLK_SRC_FLL1, -+ 0, -+ SND_SOC_CLOCK_IN); -+ if (ret) -+ dev_err(card->dev, -+ "hw_free: Failed to set SYSCLK to Zero: %d\n", -+ ret); -+ } -+ return 0; -+} -+ -+static int rpi_cirrus_init_wm5102(struct snd_soc_pcm_runtime *rtd) -+{ -+ struct snd_soc_codec *codec = rtd->codec; -+ int ret; -+ -+ /* no 32kHz input, derive it from sysclk if needed */ -+ snd_soc_update_bits(codec, -+ ARIZONA_CLOCK_32K_1, ARIZONA_CLK_32K_SRC_MASK, 2); -+ -+ if (rpi_cirrus_clear_flls(rtd->card, codec)) -+ dev_warn(rtd->card->dev, -+ "init_wm5102: failed to clear FLLs\n"); -+ -+ ret = snd_soc_codec_set_sysclk(codec, -+ ARIZONA_CLK_SYSCLK, ARIZONA_CLK_SRC_FLL1, -+ 0, SND_SOC_CLOCK_IN); -+ if (ret) { -+ dev_err(rtd->card->dev, -+ "Failed to set SYSCLK to Zero: %d\n", ret); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int rpi_cirrus_init_wm8804(struct snd_soc_pcm_runtime *rtd) -+{ -+ struct snd_soc_codec *codec = rtd->codec; -+ struct snd_soc_dai *codec_dai = rtd->codec_dai; -+ struct snd_soc_card *card = rtd->card; -+ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); -+ unsigned int mask; -+ int i, ret; -+ -+ for (i = 0; i < 4; i++) { -+ mask = (i == 3) ? 0x3f : 0xff; -+ priv->iec958_status[i] = -+ snd_soc_read(codec, WM8804_SPDTX1 + i) & mask; -+ } -+ -+ /* Setup for 256fs */ -+ ret = snd_soc_dai_set_clkdiv(codec_dai, -+ WM8804_MCLK_DIV, WM8804_MCLKDIV_256FS); -+ if (ret) { -+ dev_err(card->dev, -+ "init_wm8804: Failed to set MCLK_DIV to 256fs: %d\n", -+ ret); -+ return ret; -+ } -+ -+ /* Output OSC on CLKOUT */ -+ ret = snd_soc_dai_set_sysclk(codec_dai, -+ WM8804_CLKOUT_SRC_OSCCLK, WM8804_CLKOUT_HZ, 0); -+ if (ret) -+ dev_err(card->dev, -+ "init_wm8804: Failed to set CLKOUT as OSC Frequency: %d\n", -+ ret); -+ -+ /* Init PLL with default samplerate */ -+ ret = rpi_cirrus_set_wm8804_pll(card, codec_dai, -+ RPI_CIRRUS_DEFAULT_RATE); -+ if (ret) -+ dev_err(card->dev, -+ "init_wm8804: Failed to setup PLL for %dHz: %d\n", -+ RPI_CIRRUS_DEFAULT_RATE, ret); -+ -+ return ret; -+} -+ -+static struct snd_soc_ops rpi_cirrus_ops = { -+ .startup = rpi_cirrus_startup, -+ .hw_params = rpi_cirrus_hw_params, -+ .hw_free = rpi_cirrus_hw_free, -+}; -+ -+static struct snd_soc_dai_link rpi_cirrus_dai[] = { -+ [DAI_WM5102] = { -+ .name = "WM5102", -+ .stream_name = "WM5102 AiFi", -+ .codec_dai_name = "wm5102-aif1", -+ .codec_name = "wm5102-codec", -+ .dai_fmt = SND_SOC_DAIFMT_I2S -+ | SND_SOC_DAIFMT_NB_NF -+ | SND_SOC_DAIFMT_CBM_CFM, -+ .ops = &rpi_cirrus_ops, -+ .init = rpi_cirrus_init_wm5102, -+ }, -+ [DAI_WM8804] = { -+ .name = "WM5102 SPDIF", -+ .stream_name = "SPDIF Tx/Rx", -+ .cpu_dai_name = "wm5102-aif2", -+ .codec_dai_name = "wm8804-spdif", -+ .codec_name = "wm8804.1-003b", -+ .dai_fmt = SND_SOC_DAIFMT_I2S -+ | SND_SOC_DAIFMT_NB_NF -+ | SND_SOC_DAIFMT_CBM_CFM, -+ .ignore_suspend = 1, -+ .params = &rpi_cirrus_dai_link2_params, -+ .init = rpi_cirrus_init_wm8804, -+ }, -+}; -+ -+ -+static int rpi_cirrus_late_probe(struct snd_soc_card *card) -+{ -+ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); -+ struct snd_soc_pcm_runtime *wm5102_runtime = get_wm5102_runtime(card); -+ struct snd_soc_pcm_runtime *wm8804_runtime = get_wm8804_runtime(card); -+ int ret; -+ -+ dev_dbg(card->dev, "iec958_bits: %02x %02x %02x %02x\n", -+ priv->iec958_status[0], -+ priv->iec958_status[1], -+ priv->iec958_status[2], -+ priv->iec958_status[3]); -+ -+ ret = snd_soc_dai_set_sysclk( -+ wm5102_runtime->codec_dai, ARIZONA_CLK_SYSCLK, 0, 0); -+ if (ret) { -+ dev_err(card->dev, -+ "Failed to set WM5102 codec dai clk domain: %d\n", ret); -+ return ret; -+ } -+ -+ ret = snd_soc_dai_set_sysclk( -+ wm8804_runtime->cpu_dai, ARIZONA_CLK_SYSCLK, 0, 0); -+ if (ret) -+ dev_err(card->dev, -+ "Failed to set WM8804 codec dai clk domain: %d\n", ret); -+ -+ return ret; -+} -+ -+/* audio machine driver */ -+static struct snd_soc_card rpi_cirrus_card = { -+ .name = "RPi-Cirrus", -+ .driver_name = "RPiCirrus", -+ .owner = THIS_MODULE, -+ .dai_link = rpi_cirrus_dai, -+ .num_links = ARRAY_SIZE(rpi_cirrus_dai), -+ .late_probe = rpi_cirrus_late_probe, -+ .controls = rpi_cirrus_controls, -+ .num_controls = ARRAY_SIZE(rpi_cirrus_controls), -+ .dapm_widgets = rpi_cirrus_dapm_widgets, -+ .num_dapm_widgets = ARRAY_SIZE(rpi_cirrus_dapm_widgets), -+ .dapm_routes = rpi_cirrus_dapm_routes, -+ .num_dapm_routes = ARRAY_SIZE(rpi_cirrus_dapm_routes), -+ .set_bias_level = rpi_cirrus_set_bias_level, -+ .set_bias_level_post = rpi_cirrus_set_bias_level_post, -+}; -+ -+static int rpi_cirrus_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ struct rpi_cirrus_priv *priv; -+ struct device_node *i2s_node; -+ -+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ priv->min_rate_idx = 1; /* min samplerate 32kHz */ -+ priv->card_rate = RPI_CIRRUS_DEFAULT_RATE; -+ -+ mutex_init(&priv->lock); -+ -+ snd_soc_card_set_drvdata(&rpi_cirrus_card, priv); -+ -+ if (!pdev->dev.of_node) -+ return -ENODEV; -+ -+ i2s_node = of_parse_phandle( -+ pdev->dev.of_node, "i2s-controller", 0); -+ if (!i2s_node) { -+ dev_err(&pdev->dev, "i2s-controller missing in DT\n"); -+ return -ENODEV; -+ } -+ -+ rpi_cirrus_dai[DAI_WM5102].cpu_of_node = i2s_node; -+ rpi_cirrus_dai[DAI_WM5102].platform_of_node = i2s_node; -+ -+ rpi_cirrus_card.dev = &pdev->dev; -+ -+ ret = devm_snd_soc_register_card(&pdev->dev, &rpi_cirrus_card); -+ if (ret) { -+ if (ret == -EPROBE_DEFER) -+ dev_dbg(&pdev->dev, -+ "register card requested probe deferral\n"); -+ else -+ dev_err(&pdev->dev, -+ "Failed to register card: %d\n", ret); -+ } -+ -+ return ret; -+} -+ -+static const struct of_device_id rpi_cirrus_of_match[] = { -+ { .compatible = "wlf,rpi-cirrus", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, rpi_cirrus_of_match); -+ -+static struct platform_driver rpi_cirrus_driver = { -+ .driver = { -+ .name = "snd-rpi-cirrus", -+ .of_match_table = of_match_ptr(rpi_cirrus_of_match), -+ }, -+ .probe = rpi_cirrus_probe, -+}; -+ -+module_platform_driver(rpi_cirrus_driver); -+ -+MODULE_AUTHOR("Matthias Reichl "); -+MODULE_DESCRIPTION("ASoC driver for Cirrus Logic Audio Card"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/brcm2708/patches-4.9/0145-config-enable-Cirrus-Logic-Audio-Card.patch b/target/linux/brcm2708/patches-4.9/0145-config-enable-Cirrus-Logic-Audio-Card.patch deleted file mode 100644 index be16a47d2bb0..000000000000 --- a/target/linux/brcm2708/patches-4.9/0145-config-enable-Cirrus-Logic-Audio-Card.patch +++ /dev/null @@ -1,47 +0,0 @@ -From e34099818448051c8fa84634534dff081540c7b7 Mon Sep 17 00:00:00 2001 -From: Matthias Reichl -Date: Sun, 22 Jan 2017 12:49:37 +0100 -Subject: [PATCH] config: enable Cirrus Logic Audio Card - -Signed-off-by: Matthias Reichl ---- - arch/arm/configs/bcm2709_defconfig | 2 ++ - arch/arm/configs/bcmrpi_defconfig | 2 ++ - 2 files changed, 4 insertions(+) - ---- a/arch/arm/configs/bcm2709_defconfig -+++ b/arch/arm/configs/bcm2709_defconfig -@@ -666,6 +666,7 @@ CONFIG_MFD_ARIZONA_SPI=m - CONFIG_MFD_WM5102=y - CONFIG_REGULATOR=y - CONFIG_REGULATOR_FIXED_VOLTAGE=m -+CONFIG_REGULATOR_ARIZONA=m - CONFIG_MEDIA_SUPPORT=m - CONFIG_MEDIA_CAMERA_SUPPORT=y - CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -@@ -872,6 +873,7 @@ CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m - CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m - CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m - CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m -+CONFIG_SND_BCM2708_SOC_RPI_CIRRUS=m - CONFIG_SND_BCM2708_SOC_RPI_DAC=m - CONFIG_SND_BCM2708_SOC_RPI_PROTO=m - CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m ---- a/arch/arm/configs/bcmrpi_defconfig -+++ b/arch/arm/configs/bcmrpi_defconfig -@@ -660,6 +660,7 @@ CONFIG_MFD_ARIZONA_SPI=m - CONFIG_MFD_WM5102=y - CONFIG_REGULATOR=y - CONFIG_REGULATOR_FIXED_VOLTAGE=m -+CONFIG_REGULATOR_ARIZONA=m - CONFIG_MEDIA_SUPPORT=m - CONFIG_MEDIA_CAMERA_SUPPORT=y - CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -@@ -866,6 +867,7 @@ CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m - CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m - CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m - CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m -+CONFIG_SND_BCM2708_SOC_RPI_CIRRUS=m - CONFIG_SND_BCM2708_SOC_RPI_DAC=m - CONFIG_SND_BCM2708_SOC_RPI_PROTO=m - CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m diff --git a/target/linux/brcm2708/patches-4.9/0146-irq-bcm2836-Avoid-Invalid-trigger-warning.patch b/target/linux/brcm2708/patches-4.9/0146-irq-bcm2836-Avoid-Invalid-trigger-warning.patch deleted file mode 100644 index db9fd39d4877..000000000000 --- a/target/linux/brcm2708/patches-4.9/0146-irq-bcm2836-Avoid-Invalid-trigger-warning.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 4a849cef15885cf5dd901fafe45d3fa51b2b2a09 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 9 Feb 2017 14:33:30 +0000 -Subject: [PATCH] irq-bcm2836: Avoid "Invalid trigger warning" - -Initialise the level for each IRQ to avoid a warning from the -arm arch timer code. - -Signed-off-by: Phil Elwell ---- - drivers/irqchip/irq-bcm2836.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/irqchip/irq-bcm2836.c -+++ b/drivers/irqchip/irq-bcm2836.c -@@ -178,7 +178,7 @@ static void bcm2836_arm_irqchip_register - - irq_set_percpu_devid(irq); - irq_set_chip_and_handler(irq, chip, handle_percpu_devid_irq); -- irq_set_status_flags(irq, IRQ_NOAUTOEN); -+ irq_set_status_flags(irq, IRQ_NOAUTOEN | IRQ_TYPE_LEVEL_LOW); - } - - static void diff --git a/target/linux/brcm2708/patches-4.9/0147-sound-Demote-deferral-errors-to-INFO-level.patch b/target/linux/brcm2708/patches-4.9/0147-sound-Demote-deferral-errors-to-INFO-level.patch deleted file mode 100644 index 0a08eb9a1d7c..000000000000 --- a/target/linux/brcm2708/patches-4.9/0147-sound-Demote-deferral-errors-to-INFO-level.patch +++ /dev/null @@ -1,35 +0,0 @@ -From b78e78fa375e3aa1e91b35030e8dfc930ba425f2 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 9 Feb 2017 14:36:44 +0000 -Subject: [PATCH] sound: Demote deferral errors to INFO level - -At present there is no mechanism to specify driver load order, -which can lead to deferrals and repeated retries until successful. -Since this situation is expected, reduce the dmesg level to -INFO and mention that the operation will be retried. - -Signed-off-by: Phil Elwell ---- - sound/soc/soc-core.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/sound/soc/soc-core.c -+++ b/sound/soc/soc-core.c -@@ -1013,7 +1013,7 @@ static int soc_bind_dai_link(struct snd_ - cpu_dai_component.dai_name = dai_link->cpu_dai_name; - rtd->cpu_dai = snd_soc_find_dai(&cpu_dai_component); - if (!rtd->cpu_dai) { -- dev_err(card->dev, "ASoC: CPU DAI %s not registered\n", -+ dev_info(card->dev, "ASoC: CPU DAI %s not registered - will retry\n", - dai_link->cpu_dai_name); - goto _err_defer; - } -@@ -1025,7 +1025,7 @@ static int soc_bind_dai_link(struct snd_ - for (i = 0; i < rtd->num_codecs; i++) { - codec_dais[i] = snd_soc_find_dai(&codecs[i]); - if (!codec_dais[i]) { -- dev_err(card->dev, "ASoC: CODEC DAI %s not registered\n", -+ dev_info(card->dev, "ASoC: CODEC DAI %s not registered - will retry\n", - codecs[i].dai_name); - goto _err_defer; - } diff --git a/target/linux/brcm2708/patches-4.9/0148-sound-Suppress-error-message-about-deferrals.patch b/target/linux/brcm2708/patches-4.9/0148-sound-Suppress-error-message-about-deferrals.patch deleted file mode 100644 index 52e36b533254..000000000000 --- a/target/linux/brcm2708/patches-4.9/0148-sound-Suppress-error-message-about-deferrals.patch +++ /dev/null @@ -1,217 +0,0 @@ -From 6ebd83ad7b2bff00ad3e25811c38e73bb4201b07 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 9 Feb 2017 14:40:33 +0000 -Subject: [PATCH] sound: Suppress error message about deferrals - -Since driver load deferrals are expected and will already -have resulted in a kernel message, suppress an essentially -duplicate error message from the RPi audio board drivers. - -Signed-off-by: Phil Elwell ---- - sound/soc/bcm/adau1977-adc.c | 2 +- - sound/soc/bcm/allo-piano-dac.c | 2 +- - sound/soc/bcm/digidac1-soundcard.c | 4 ++-- - sound/soc/bcm/dionaudio_loco.c | 2 +- - sound/soc/bcm/hifiberry_amp.c | 3 +-- - sound/soc/bcm/hifiberry_dac.c | 2 +- - sound/soc/bcm/hifiberry_dacplus.c | 2 +- - sound/soc/bcm/hifiberry_digi.c | 2 +- - sound/soc/bcm/iqaudio-dac.c | 5 +++-- - sound/soc/bcm/iqaudio_digi.c | 2 +- - sound/soc/bcm/justboom-dac.c | 2 +- - sound/soc/bcm/justboom-digi.c | 2 +- - sound/soc/bcm/pisound.c | 3 ++- - sound/soc/bcm/raspidac3.c | 2 +- - sound/soc/bcm/rpi-dac.c | 2 +- - sound/soc/bcm/rpi-proto.c | 3 +-- - 16 files changed, 20 insertions(+), 20 deletions(-) - ---- a/sound/soc/bcm/adau1977-adc.c -+++ b/sound/soc/bcm/adau1977-adc.c -@@ -90,7 +90,7 @@ static int snd_adau1977_adc_probe(struct - } - - ret = snd_soc_register_card(&snd_adau1977_adc); -- if (ret) -+ if (ret && ret != -EPROBE_DEFER) - dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); - - return ret; ---- a/sound/soc/bcm/allo-piano-dac.c -+++ b/sound/soc/bcm/allo-piano-dac.c -@@ -109,7 +109,7 @@ static int snd_allo_piano_dac_probe(stru - } - - ret = snd_soc_register_card(&snd_allo_piano_dac); -- if (ret) -+ if (ret && ret != -EPROBE_DEFER) - dev_err(&pdev->dev, - "snd_soc_register_card() failed: %d\n", ret); - ---- a/sound/soc/bcm/digidac1-soundcard.c -+++ b/sound/soc/bcm/digidac1-soundcard.c -@@ -387,9 +387,9 @@ static int digidac1_soundcard_probe(stru - } - - ret = snd_soc_register_card(&digidac1_soundcard); -- if (ret) -+ if (ret && ret != -EPROBE_DEFER) - dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", -- ret); -+ ret); - - return ret; - } ---- a/sound/soc/bcm/dionaudio_loco.c -+++ b/sound/soc/bcm/dionaudio_loco.c -@@ -86,7 +86,7 @@ static int snd_rpi_dionaudio_loco_probe( - } - - ret = snd_soc_register_card(&snd_rpi_dionaudio_loco); -- if (ret) -+ if (ret && ret != -EPROBE_DEFER) - dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", - ret); - ---- a/sound/soc/bcm/hifiberry_amp.c -+++ b/sound/soc/bcm/hifiberry_amp.c -@@ -96,9 +96,8 @@ static int snd_rpi_hifiberry_amp_probe(s - - ret = snd_soc_register_card(&snd_rpi_hifiberry_amp); - -- if (ret != 0) { -+ if (ret && ret != -EPROBE_DEFER) - dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); -- } - - return ret; - } ---- a/sound/soc/bcm/hifiberry_dac.c -+++ b/sound/soc/bcm/hifiberry_dac.c -@@ -90,7 +90,7 @@ static int snd_rpi_hifiberry_dac_probe(s - } - - ret = snd_soc_register_card(&snd_rpi_hifiberry_dac); -- if (ret) -+ if (ret && ret != -EPROBE_DEFER) - dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); - - return ret; ---- a/sound/soc/bcm/hifiberry_dacplus.c -+++ b/sound/soc/bcm/hifiberry_dacplus.c -@@ -324,7 +324,7 @@ static int snd_rpi_hifiberry_dacplus_pro - } - - ret = snd_soc_register_card(&snd_rpi_hifiberry_dacplus); -- if (ret) -+ if (ret && ret != -EPROBE_DEFER) - dev_err(&pdev->dev, - "snd_soc_register_card() failed: %d\n", ret); - ---- a/sound/soc/bcm/hifiberry_digi.c -+++ b/sound/soc/bcm/hifiberry_digi.c -@@ -242,7 +242,7 @@ static int snd_rpi_hifiberry_digi_probe( - } - - ret = snd_soc_register_card(&snd_rpi_hifiberry_digi); -- if (ret) -+ if (ret && ret != -EPROBE_DEFER) - dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); - - return ret; ---- a/sound/soc/bcm/iqaudio-dac.c -+++ b/sound/soc/bcm/iqaudio-dac.c -@@ -197,8 +197,9 @@ static int snd_rpi_iqaudio_dac_probe(str - - ret = snd_soc_register_card(&snd_rpi_iqaudio_dac); - if (ret) { -- dev_err(&pdev->dev, -- "snd_soc_register_card() failed: %d\n", ret); -+ if (ret != -EPROBE_DEFER) -+ dev_err(&pdev->dev, -+ "snd_soc_register_card() failed: %d\n", ret); - return ret; - } - ---- a/sound/soc/bcm/iqaudio_digi.c -+++ b/sound/soc/bcm/iqaudio_digi.c -@@ -204,7 +204,7 @@ static int snd_rpi_iqaudio_digi_probe(st - } - - ret = snd_soc_register_card(card); -- if (ret) -+ if (ret && ret != -EPROBE_DEFER) - dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", - ret); - ---- a/sound/soc/bcm/justboom-dac.c -+++ b/sound/soc/bcm/justboom-dac.c -@@ -128,7 +128,7 @@ static int snd_rpi_justboom_dac_probe(st - } - - ret = snd_soc_register_card(&snd_rpi_justboom_dac); -- if (ret) -+ if (ret && ret != -EPROBE_DEFER) - dev_err(&pdev->dev, - "snd_soc_register_card() failed: %d\n", ret); - ---- a/sound/soc/bcm/justboom-digi.c -+++ b/sound/soc/bcm/justboom-digi.c -@@ -181,7 +181,7 @@ static int snd_rpi_justboom_digi_probe(s - } - - ret = snd_soc_register_card(&snd_rpi_justboom_digi); -- if (ret) -+ if (ret && ret != -EPROBE_DEFER) - dev_err(&pdev->dev, - "snd_soc_register_card() failed: %d\n", ret); - ---- a/sound/soc/bcm/pisound.c -+++ b/sound/soc/bcm/pisound.c -@@ -1076,7 +1076,8 @@ static int pisnd_probe(struct platform_d - ret = snd_soc_register_card(&pisnd_card); - - if (ret < 0) { -- printe("snd_soc_register_card() failed: %d\n", ret); -+ if (ret != -EPROBE_DEFER) -+ printe("snd_soc_register_card() failed: %d\n", ret); - pisnd_uninit_gpio(); - kobject_put(pisnd_kobj); - pisnd_spi_uninit(); ---- a/sound/soc/bcm/raspidac3.c -+++ b/sound/soc/bcm/raspidac3.c -@@ -149,7 +149,7 @@ static int snd_rpi_raspidac3_probe(struc - } - - ret = snd_soc_register_card(&snd_rpi_raspidac3); -- if (ret) -+ if (ret && ret != -EPROBE_DEFER) - dev_err(&pdev->dev, - "snd_soc_register_card() failed: %d\n", ret); - ---- a/sound/soc/bcm/rpi-dac.c -+++ b/sound/soc/bcm/rpi-dac.c -@@ -85,7 +85,7 @@ static int snd_rpi_rpi_dac_probe(struct - } - - ret = snd_soc_register_card(&snd_rpi_rpi_dac); -- if (ret) -+ if (ret && ret != -EPROBE_DEFER) - dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); - - return ret; ---- a/sound/soc/bcm/rpi-proto.c -+++ b/sound/soc/bcm/rpi-proto.c -@@ -117,10 +117,9 @@ static int snd_rpi_proto_probe(struct pl - } - - ret = snd_soc_register_card(&snd_rpi_proto); -- if (ret) { -+ if (ret && ret != -EPROBE_DEFER) - dev_err(&pdev->dev, - "snd_soc_register_card() failed: %d\n", ret); -- } - - return ret; - } diff --git a/target/linux/brcm2708/patches-4.9/0149-Update-vfpmodule.c.patch b/target/linux/brcm2708/patches-4.9/0149-Update-vfpmodule.c.patch deleted file mode 100644 index 16d740aafb20..000000000000 --- a/target/linux/brcm2708/patches-4.9/0149-Update-vfpmodule.c.patch +++ /dev/null @@ -1,137 +0,0 @@ -From aa00ca3b0296c40a6b5a1ad32258d5b655a28c70 Mon Sep 17 00:00:00 2001 -From: Claggy3 -Date: Sat, 11 Feb 2017 14:00:30 +0000 -Subject: [PATCH] Update vfpmodule.c - -Christopher Alexander Tobias Schulze - May 2, 2015, 11:57 a.m. -This patch fixes a problem with VFP state save and restore related -to exception handling (panic with message "BUG: unsupported FP -instruction in kernel mode") present on VFP11 floating point units -(as used with ARM1176JZF-S CPUs, e.g. on first generation Raspberry -Pi boards). This patch was developed and discussed on - - https://github.com/raspberrypi/linux/issues/859 - -A precondition to see the crashes is that floating point exception -traps are enabled. In this case, the VFP11 might determine that a FPU -operation needs to trap at a point in time when it is not possible to -signal this to the ARM11 core any more. The VFP11 will then set the -FPEXC.EX bit and store the trapped opcode in FPINST. (In some cases, -a second opcode might have been accepted by the VFP11 before the -exception was detected and could be reported to the ARM11 - in this -case, the VFP11 also sets FPEXC.FP2V and stores the second opcode in -FPINST2.) - -If FPEXC.EX is set, the VFP11 will "bounce" the next FPU opcode issued -by the ARM11 CPU, which will be seen by the ARM11 as an undefined opcode -trap. The VFP support code examines the FPEXC.EX and FPEXC.FP2V bits -to decide what actions to take, i.e., whether to emulate the opcodes -found in FPINST and FPINST2, and whether to retry the bounced instruction. - -If a user space application has left the VFP11 in this "pending trap" -state, the next FPU opcode issued to the VFP11 might actually be the -VSTMIA operation vfp_save_state() uses to store the FPU registers -to memory (in our test cases, when building the signal stack frame). -In this case, the kernel crashes as described above. - -This patch fixes the problem by making sure that vfp_save_state() is -always entered with FPEXC.EX cleared. (The current value of FPEXC has -already been saved, so this does not corrupt the context. Clearing -FPEXC.EX has no effects on FPINST or FPINST2. Also note that many -callers already modify FPEXC by setting FPEXC.EN before invoking -vfp_save_state().) - -This patch also addresses a second problem related to FPEXC.EX: After -returning from signal handling, the kernel reloads the VFP context -from the user mode stack. However, the current code explicitly clears -both FPEXC.EX and FPEXC.FP2V during reload. As VFP11 requires these -bits to be preserved, this patch disables clearing them for VFP -implementations belonging to architecture 1. There should be no -negative side effects: the user can set both bits by executing FPU -opcodes anyway, and while user code may now place arbitrary values -into FPINST and FPINST2 (e.g., non-VFP ARM opcodes) the VFP support -code knows which instructions can be emulated, and rejects other -opcodes with "unhandled bounce" messages, so there should be no -security impact from allowing reloading FPEXC.EX and FPEXC.FP2V. - -Signed-off-by: Christopher Alexander Tobias Schulze ---- - arch/arm/vfp/vfpmodule.c | 25 +++++++++++++++++++------ - 1 file changed, 19 insertions(+), 6 deletions(-) - ---- a/arch/arm/vfp/vfpmodule.c -+++ b/arch/arm/vfp/vfpmodule.c -@@ -179,8 +179,11 @@ static int vfp_notifier(struct notifier_ - * case the thread migrates to a different CPU. The - * restoring is done lazily. - */ -- if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) -+ if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) { -+ /* vfp_save_state oopses on VFP11 if EX bit set */ -+ fmxr(FPEXC, fpexc & ~FPEXC_EX); - vfp_save_state(vfp_current_hw_state[cpu], fpexc); -+ } - #endif - - /* -@@ -463,13 +466,16 @@ static int vfp_pm_suspend(void) - /* if vfp is on, then save state for resumption */ - if (fpexc & FPEXC_EN) { - pr_debug("%s: saving vfp state\n", __func__); -+ /* vfp_save_state oopses on VFP11 if EX bit set */ -+ fmxr(FPEXC, fpexc & ~FPEXC_EX); - vfp_save_state(&ti->vfpstate, fpexc); - - /* disable, just in case */ - fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); - } else if (vfp_current_hw_state[ti->cpu]) { - #ifndef CONFIG_SMP -- fmxr(FPEXC, fpexc | FPEXC_EN); -+ /* vfp_save_state oopses on VFP11 if EX bit set */ -+ fmxr(FPEXC, (fpexc & ~FPEXC_EX) | FPEXC_EN); - vfp_save_state(vfp_current_hw_state[ti->cpu], fpexc); - fmxr(FPEXC, fpexc); - #endif -@@ -532,7 +538,8 @@ void vfp_sync_hwstate(struct thread_info - /* - * Save the last VFP state on this CPU. - */ -- fmxr(FPEXC, fpexc | FPEXC_EN); -+ /* vfp_save_state oopses on VFP11 if EX bit set */ -+ fmxr(FPEXC, (fpexc & ~FPEXC_EX) | FPEXC_EN); - vfp_save_state(&thread->vfpstate, fpexc | FPEXC_EN); - fmxr(FPEXC, fpexc); - } -@@ -604,6 +611,7 @@ int vfp_restore_user_hwstate(struct user - struct vfp_hard_struct *hwstate = &thread->vfpstate.hard; - unsigned long fpexc; - int err = 0; -+ u32 fpsid = fmrx(FPSID); - - /* Disable VFP to avoid corrupting the new thread state. */ - vfp_flush_hwstate(thread); -@@ -627,8 +635,12 @@ int vfp_restore_user_hwstate(struct user - /* Ensure the VFP is enabled. */ - fpexc |= FPEXC_EN; - -- /* Ensure FPINST2 is invalid and the exception flag is cleared. */ -- fpexc &= ~(FPEXC_EX | FPEXC_FP2V); -+ /* Mask FPXEC_EX and FPEXC_FP2V if not required by VFP arch */ -+ if ((fpsid & FPSID_ARCH_MASK) != (1 << FPSID_ARCH_BIT)) { -+ /* Ensure FPINST2 is invalid and the exception flag is cleared. */ -+ fpexc &= ~(FPEXC_EX | FPEXC_FP2V); -+ } -+ - hwstate->fpexc = fpexc; - - __get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err); -@@ -698,7 +710,8 @@ void kernel_neon_begin(void) - cpu = get_cpu(); - - fpexc = fmrx(FPEXC) | FPEXC_EN; -- fmxr(FPEXC, fpexc); -+ /* vfp_save_state oopses on VFP11 if EX bit set */ -+ fmxr(FPEXC, fpexc & ~FPEXC_EX); - - /* - * Save the userland NEON/VFP state. Under UP, diff --git a/target/linux/brcm2708/patches-4.9/0150-dwc_otg-fix-summarize-urb-actual_length-for-isochron.patch b/target/linux/brcm2708/patches-4.9/0150-dwc_otg-fix-summarize-urb-actual_length-for-isochron.patch deleted file mode 100644 index 295db595ca27..000000000000 --- a/target/linux/brcm2708/patches-4.9/0150-dwc_otg-fix-summarize-urb-actual_length-for-isochron.patch +++ /dev/null @@ -1,28 +0,0 @@ -From f9efb72c44da2cce9cceca01c8f6118ec1605c69 Mon Sep 17 00:00:00 2001 -From: Martin Cerveny -Date: Mon, 13 Feb 2017 17:23:47 +0100 -Subject: [PATCH] dwc_otg: fix summarize urb->actual_length for isochronous - transfers - -Kernel does not copy input data of ISO transfers to userspace -if actual_length is set only in ISO transfers and not summarized -in urb->actual_length. Fixes raspberrypi/linux#903 ---- - drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c -@@ -334,10 +334,12 @@ static int _complete(dwc_otg_hcd_t * hcd - int i; - - urb->error_count = dwc_otg_hcd_urb_get_error_count(dwc_otg_urb); -+ urb->actual_length = 0; - for (i = 0; i < urb->number_of_packets; ++i) { - urb->iso_frame_desc[i].actual_length = - dwc_otg_hcd_urb_get_iso_desc_actual_length - (dwc_otg_urb, i); -+ urb->actual_length += urb->iso_frame_desc[i].actual_length; - urb->iso_frame_desc[i].status = - dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_urb, i); - } diff --git a/target/linux/brcm2708/patches-4.9/0151-clk-bcm2835-Fix-fixed_divider-of-pllh_aux.patch b/target/linux/brcm2708/patches-4.9/0151-clk-bcm2835-Fix-fixed_divider-of-pllh_aux.patch deleted file mode 100644 index 82f462847b87..000000000000 --- a/target/linux/brcm2708/patches-4.9/0151-clk-bcm2835-Fix-fixed_divider-of-pllh_aux.patch +++ /dev/null @@ -1,27 +0,0 @@ -From b8ded4dca34feafd33f22eff47d19b17b7dd83f4 Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Tue, 22 Nov 2016 12:45:28 -0800 -Subject: [PATCH] clk: bcm2835: Fix ->fixed_divider of pllh_aux - -There is no fixed divider on pllh_aux. - -Signed-off-by: Boris Brezillon -Signed-off-by: Eric Anholt -Reviewed-by: Eric Anholt -Signed-off-by: Stephen Boyd -(cherry picked from commit f2a46926aba1f0c33944901d2420a6a887455ddc) ---- - drivers/clk/bcm/clk-bcm2835.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1607,7 +1607,7 @@ static const struct bcm2835_clk_desc clk - .a2w_reg = A2W_PLLH_AUX, - .load_mask = CM_PLLH_LOADAUX, - .hold_mask = 0, -- .fixed_divider = 10), -+ .fixed_divider = 1), - [BCM2835_PLLH_PIX] = REGISTER_PLL_DIV( - .name = "pllh_pix", - .source_pll = "pllh", diff --git a/target/linux/brcm2708/patches-4.9/0152-clk-bcm-Support-rate-change-propagation-on-bcm2835-c.patch b/target/linux/brcm2708/patches-4.9/0152-clk-bcm-Support-rate-change-propagation-on-bcm2835-c.patch deleted file mode 100644 index 448b0375b3e3..000000000000 --- a/target/linux/brcm2708/patches-4.9/0152-clk-bcm-Support-rate-change-propagation-on-bcm2835-c.patch +++ /dev/null @@ -1,124 +0,0 @@ -From 2988239956fddb3fb808cfb50fa8d4e68b893f3d Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Thu, 1 Dec 2016 22:00:19 +0100 -Subject: [PATCH] clk: bcm: Support rate change propagation on bcm2835 clocks - -Some peripheral clocks, like the VEC (Video EnCoder) clock need to be set -to a precise rate (in our case 108MHz). With the current implementation, -where peripheral clocks are not allowed to forward rate change requests -to their parents, it is impossible to match this requirement unless the -bootloader has configured things correctly, or a specific rate has been -assigned through the DT (with the assigned-clk-rates property). - -Add a new field to struct bcm2835_clock_data to specify which parent -clocks accept rate change propagation, and support set rate propagation -in bcm2835_clock_determine_rate(). - -Signed-off-by: Boris Brezillon -Reviewed-by: Eric Anholt -Signed-off-by: Stephen Boyd -(cherry picked from commit 155e8b3b0ee320ae866b97dd31eba8a1f080a772) ---- - drivers/clk/bcm/clk-bcm2835.c | 67 ++++++++++++++++++++++++++++++++++++++++--- - 1 file changed, 63 insertions(+), 4 deletions(-) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -436,6 +436,9 @@ struct bcm2835_clock_data { - const char *const *parents; - int num_mux_parents; - -+ /* Bitmap encoding which parents accept rate change propagation. */ -+ unsigned int set_rate_parent; -+ - u32 ctl_reg; - u32 div_reg; - -@@ -1017,10 +1020,60 @@ bcm2835_clk_is_pllc(struct clk_hw *hw) - return strncmp(clk_hw_get_name(hw), "pllc", 4) == 0; - } - -+static unsigned long bcm2835_clock_choose_div_and_prate(struct clk_hw *hw, -+ int parent_idx, -+ unsigned long rate, -+ u32 *div, -+ unsigned long *prate) -+{ -+ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); -+ struct bcm2835_cprman *cprman = clock->cprman; -+ const struct bcm2835_clock_data *data = clock->data; -+ unsigned long best_rate; -+ u32 curdiv, mindiv, maxdiv; -+ struct clk_hw *parent; -+ -+ parent = clk_hw_get_parent_by_index(hw, parent_idx); -+ -+ if (!(BIT(parent_idx) & data->set_rate_parent)) { -+ *prate = clk_hw_get_rate(parent); -+ *div = bcm2835_clock_choose_div(hw, rate, *prate, true); -+ -+ return bcm2835_clock_rate_from_divisor(clock, *prate, -+ *div); -+ } -+ -+ if (data->frac_bits) -+ dev_warn(cprman->dev, -+ "frac bits are not used when propagating rate change"); -+ -+ /* clamp to min divider of 2 if we're dealing with a mash clock */ -+ mindiv = data->is_mash_clock ? 2 : 1; -+ maxdiv = BIT(data->int_bits) - 1; -+ -+ /* TODO: Be smart, and only test a subset of the available divisors. */ -+ for (curdiv = mindiv; curdiv <= maxdiv; curdiv++) { -+ unsigned long tmp_rate; -+ -+ tmp_rate = clk_hw_round_rate(parent, rate * curdiv); -+ tmp_rate /= curdiv; -+ if (curdiv == mindiv || -+ (tmp_rate > best_rate && tmp_rate <= rate)) -+ best_rate = tmp_rate; -+ -+ if (best_rate == rate) -+ break; -+ } -+ -+ *div = curdiv << CM_DIV_FRAC_BITS; -+ *prate = curdiv * best_rate; -+ -+ return best_rate; -+} -+ - static int bcm2835_clock_determine_rate(struct clk_hw *hw, - struct clk_rate_request *req) - { -- struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); - struct clk_hw *parent, *best_parent = NULL; - bool current_parent_is_pllc; - unsigned long rate, best_rate = 0; -@@ -1048,9 +1101,8 @@ static int bcm2835_clock_determine_rate( - if (bcm2835_clk_is_pllc(parent) && !current_parent_is_pllc) - continue; - -- prate = clk_hw_get_rate(parent); -- div = bcm2835_clock_choose_div(hw, req->rate, prate, true); -- rate = bcm2835_clock_rate_from_divisor(clock, prate, div); -+ rate = bcm2835_clock_choose_div_and_prate(hw, i, req->rate, -+ &div, &prate); - if (rate > best_rate && rate <= req->rate) { - best_parent = parent; - best_prate = prate; -@@ -1271,6 +1323,13 @@ static struct clk_hw *bcm2835_register_c - if ((cprman_read(cprman, data->ctl_reg) & CM_ENABLE) == 0) - init.flags &= ~CLK_IS_CRITICAL; - -+ /* -+ * Pass the CLK_SET_RATE_PARENT flag if we are allowed to propagate -+ * rate changes on at least of the parents. -+ */ -+ if (data->set_rate_parent) -+ init.flags |= CLK_SET_RATE_PARENT; -+ - if (data->is_vpu_clock) { - init.ops = &bcm2835_vpu_clock_clk_ops; - } else { diff --git a/target/linux/brcm2708/patches-4.9/0153-clk-bcm-Allow-rate-change-propagation-to-PLLH_AUX-on.patch b/target/linux/brcm2708/patches-4.9/0153-clk-bcm-Allow-rate-change-propagation-to-PLLH_AUX-on.patch deleted file mode 100644 index ed082abaa505..000000000000 --- a/target/linux/brcm2708/patches-4.9/0153-clk-bcm-Allow-rate-change-propagation-to-PLLH_AUX-on.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 5209e1b8f78fd1184f25cf19cf0daa58f4ad6599 Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Thu, 1 Dec 2016 22:00:20 +0100 -Subject: [PATCH] clk: bcm: Allow rate change propagation to PLLH_AUX on VEC - clock - -The VEC clock requires needs to be set at exactly 108MHz. Allow rate -change propagation on PLLH_AUX to match this requirement wihtout -impacting other IPs (PLLH is currently only used by the HDMI encoder, -which cannot be enabled when the VEC encoder is enabled). - -Signed-off-by: Boris Brezillon -Reviewed-by: Eric Anholt -Signed-off-by: Stephen Boyd -(cherry picked from commit d86d46af84855403c00018be1c3e7bc190f2a6cd) ---- - drivers/clk/bcm/clk-bcm2835.c | 7 ++++++- - 1 file changed, 6 insertions(+), 1 deletion(-) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1870,7 +1870,12 @@ static const struct bcm2835_clk_desc clk - .ctl_reg = CM_VECCTL, - .div_reg = CM_VECDIV, - .int_bits = 4, -- .frac_bits = 0), -+ .frac_bits = 0, -+ /* -+ * Allow rate change propagation only on PLLH_AUX which is -+ * assigned index 7 in the parent array. -+ */ -+ .set_rate_parent = BIT(7)), - - /* dsi clocks */ - [BCM2835_CLOCK_DSI0E] = REGISTER_PER_CLK( diff --git a/target/linux/brcm2708/patches-4.9/0154-clk-bcm-Fix-maybe-uninitialized-warning-in-bcm2835_c.patch b/target/linux/brcm2708/patches-4.9/0154-clk-bcm-Fix-maybe-uninitialized-warning-in-bcm2835_c.patch deleted file mode 100644 index 01e29775b97a..000000000000 --- a/target/linux/brcm2708/patches-4.9/0154-clk-bcm-Fix-maybe-uninitialized-warning-in-bcm2835_c.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 9db88c2a81a12eb2b2953ee1f9090624fcc47dab Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Mon, 12 Dec 2016 09:00:53 +0100 -Subject: [PATCH] clk: bcm: Fix 'maybe-uninitialized' warning in - bcm2835_clock_choose_div_and_prate() - -best_rate is reported as potentially uninitialized by gcc. - -Signed-off-by: Boris Brezillon -Fixes: 155e8b3b0ee3 ("clk: bcm: Support rate change propagation on bcm2835 clocks") -Reported-by: Stephen Rothwell -Reviewed-by: Eric Anholt -Signed-off-by: Stephen Boyd -(cherry picked from commit 2aab7a2055a1705c9e30920d95a596226999eb21) ---- - drivers/clk/bcm/clk-bcm2835.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1029,7 +1029,7 @@ static unsigned long bcm2835_clock_choos - struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); - struct bcm2835_cprman *cprman = clock->cprman; - const struct bcm2835_clock_data *data = clock->data; -- unsigned long best_rate; -+ unsigned long best_rate = 0; - u32 curdiv, mindiv, maxdiv; - struct clk_hw *parent; - diff --git a/target/linux/brcm2708/patches-4.9/0155-clk-bcm2835-Don-t-rate-change-PLLs-on-behalf-of-DSI-.patch b/target/linux/brcm2708/patches-4.9/0155-clk-bcm2835-Don-t-rate-change-PLLs-on-behalf-of-DSI-.patch deleted file mode 100644 index 154e06115579..000000000000 --- a/target/linux/brcm2708/patches-4.9/0155-clk-bcm2835-Don-t-rate-change-PLLs-on-behalf-of-DSI-.patch +++ /dev/null @@ -1,172 +0,0 @@ -From 999db52750c062708532e1357ea3942cc619794f Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 18 Jan 2017 07:31:55 +1100 -Subject: [PATCH] clk: bcm2835: Don't rate change PLLs on behalf of DSI PLL - dividers. - -Our core PLLs are intended to be configured once and left alone. With -the SET_RATE_PARENT, asking to set the PLLD_DSI1 clock rate would -change PLLD just to get closer to the requested DSI clock, thus -changing PLLD_PER, the UART and ethernet PHY clock rates downstream of -it, and breaking ethernet. - -We *do* want PLLH to change so that PLLH_AUX can be exactly the value -we want, though. Thus, we need to have a per-divider policy of -whether to pass rate changes up. - -Signed-off-by: Eric Anholt -Signed-off-by: Stephen Boyd -(cherry picked from commit 55486091bd1e1c5ed28c43c0d6b3392468a9adb5) ---- - drivers/clk/bcm/clk-bcm2835.c | 42 ++++++++++++++++++++++++++++-------------- - 1 file changed, 28 insertions(+), 14 deletions(-) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -428,6 +428,7 @@ struct bcm2835_pll_divider_data { - u32 load_mask; - u32 hold_mask; - u32 fixed_divider; -+ u32 flags; - }; - - struct bcm2835_clock_data { -@@ -1252,7 +1253,7 @@ bcm2835_register_pll_divider(struct bcm2 - init.num_parents = 1; - init.name = divider_name; - init.ops = &bcm2835_pll_divider_clk_ops; -- init.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED; -+ init.flags = data->flags | CLK_IGNORE_UNUSED; - - divider = devm_kzalloc(cprman->dev, sizeof(*divider), GFP_KERNEL); - if (!divider) -@@ -1475,7 +1476,8 @@ static const struct bcm2835_clk_desc clk - .a2w_reg = A2W_PLLA_CORE, - .load_mask = CM_PLLA_LOADCORE, - .hold_mask = CM_PLLA_HOLDCORE, -- .fixed_divider = 1), -+ .fixed_divider = 1, -+ .flags = CLK_SET_RATE_PARENT), - [BCM2835_PLLA_PER] = REGISTER_PLL_DIV( - .name = "plla_per", - .source_pll = "plla", -@@ -1483,7 +1485,8 @@ static const struct bcm2835_clk_desc clk - .a2w_reg = A2W_PLLA_PER, - .load_mask = CM_PLLA_LOADPER, - .hold_mask = CM_PLLA_HOLDPER, -- .fixed_divider = 1), -+ .fixed_divider = 1, -+ .flags = CLK_SET_RATE_PARENT), - [BCM2835_PLLA_DSI0] = REGISTER_PLL_DIV( - .name = "plla_dsi0", - .source_pll = "plla", -@@ -1499,7 +1502,8 @@ static const struct bcm2835_clk_desc clk - .a2w_reg = A2W_PLLA_CCP2, - .load_mask = CM_PLLA_LOADCCP2, - .hold_mask = CM_PLLA_HOLDCCP2, -- .fixed_divider = 1), -+ .fixed_divider = 1, -+ .flags = CLK_SET_RATE_PARENT), - - /* PLLB is used for the ARM's clock. */ - [BCM2835_PLLB] = REGISTER_PLL( -@@ -1523,7 +1527,8 @@ static const struct bcm2835_clk_desc clk - .a2w_reg = A2W_PLLB_ARM, - .load_mask = CM_PLLB_LOADARM, - .hold_mask = CM_PLLB_HOLDARM, -- .fixed_divider = 1), -+ .fixed_divider = 1, -+ .flags = CLK_SET_RATE_PARENT), - - /* - * PLLC is the core PLL, used to drive the core VPU clock. -@@ -1552,7 +1557,8 @@ static const struct bcm2835_clk_desc clk - .a2w_reg = A2W_PLLC_CORE0, - .load_mask = CM_PLLC_LOADCORE0, - .hold_mask = CM_PLLC_HOLDCORE0, -- .fixed_divider = 1), -+ .fixed_divider = 1, -+ .flags = CLK_SET_RATE_PARENT), - [BCM2835_PLLC_CORE1] = REGISTER_PLL_DIV( - .name = "pllc_core1", - .source_pll = "pllc", -@@ -1560,7 +1566,8 @@ static const struct bcm2835_clk_desc clk - .a2w_reg = A2W_PLLC_CORE1, - .load_mask = CM_PLLC_LOADCORE1, - .hold_mask = CM_PLLC_HOLDCORE1, -- .fixed_divider = 1), -+ .fixed_divider = 1, -+ .flags = CLK_SET_RATE_PARENT), - [BCM2835_PLLC_CORE2] = REGISTER_PLL_DIV( - .name = "pllc_core2", - .source_pll = "pllc", -@@ -1568,7 +1575,8 @@ static const struct bcm2835_clk_desc clk - .a2w_reg = A2W_PLLC_CORE2, - .load_mask = CM_PLLC_LOADCORE2, - .hold_mask = CM_PLLC_HOLDCORE2, -- .fixed_divider = 1), -+ .fixed_divider = 1, -+ .flags = CLK_SET_RATE_PARENT), - [BCM2835_PLLC_PER] = REGISTER_PLL_DIV( - .name = "pllc_per", - .source_pll = "pllc", -@@ -1576,7 +1584,8 @@ static const struct bcm2835_clk_desc clk - .a2w_reg = A2W_PLLC_PER, - .load_mask = CM_PLLC_LOADPER, - .hold_mask = CM_PLLC_HOLDPER, -- .fixed_divider = 1), -+ .fixed_divider = 1, -+ .flags = CLK_SET_RATE_PARENT), - - /* - * PLLD is the display PLL, used to drive DSI display panels. -@@ -1605,7 +1614,8 @@ static const struct bcm2835_clk_desc clk - .a2w_reg = A2W_PLLD_CORE, - .load_mask = CM_PLLD_LOADCORE, - .hold_mask = CM_PLLD_HOLDCORE, -- .fixed_divider = 1), -+ .fixed_divider = 1, -+ .flags = CLK_SET_RATE_PARENT), - [BCM2835_PLLD_PER] = REGISTER_PLL_DIV( - .name = "plld_per", - .source_pll = "plld", -@@ -1613,7 +1623,8 @@ static const struct bcm2835_clk_desc clk - .a2w_reg = A2W_PLLD_PER, - .load_mask = CM_PLLD_LOADPER, - .hold_mask = CM_PLLD_HOLDPER, -- .fixed_divider = 1), -+ .fixed_divider = 1, -+ .flags = CLK_SET_RATE_PARENT), - [BCM2835_PLLD_DSI0] = REGISTER_PLL_DIV( - .name = "plld_dsi0", - .source_pll = "plld", -@@ -1658,7 +1669,8 @@ static const struct bcm2835_clk_desc clk - .a2w_reg = A2W_PLLH_RCAL, - .load_mask = CM_PLLH_LOADRCAL, - .hold_mask = 0, -- .fixed_divider = 10), -+ .fixed_divider = 10, -+ .flags = CLK_SET_RATE_PARENT), - [BCM2835_PLLH_AUX] = REGISTER_PLL_DIV( - .name = "pllh_aux", - .source_pll = "pllh", -@@ -1666,7 +1678,8 @@ static const struct bcm2835_clk_desc clk - .a2w_reg = A2W_PLLH_AUX, - .load_mask = CM_PLLH_LOADAUX, - .hold_mask = 0, -- .fixed_divider = 1), -+ .fixed_divider = 1, -+ .flags = CLK_SET_RATE_PARENT), - [BCM2835_PLLH_PIX] = REGISTER_PLL_DIV( - .name = "pllh_pix", - .source_pll = "pllh", -@@ -1674,7 +1687,8 @@ static const struct bcm2835_clk_desc clk - .a2w_reg = A2W_PLLH_PIX, - .load_mask = CM_PLLH_LOADPIX, - .hold_mask = 0, -- .fixed_divider = 10), -+ .fixed_divider = 10, -+ .flags = CLK_SET_RATE_PARENT), - - /* the clocks */ - diff --git a/target/linux/brcm2708/patches-4.9/0156-clk-bcm2835-Register-the-DSI0-DSI1-pixel-clocks.patch b/target/linux/brcm2708/patches-4.9/0156-clk-bcm2835-Register-the-DSI0-DSI1-pixel-clocks.patch deleted file mode 100644 index 24e8aedbdc9c..000000000000 --- a/target/linux/brcm2708/patches-4.9/0156-clk-bcm2835-Register-the-DSI0-DSI1-pixel-clocks.patch +++ /dev/null @@ -1,238 +0,0 @@ -From 876f8ef32ec09fb566cc6ecdf4c96a8348f135b6 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 18 Jan 2017 07:31:56 +1100 -Subject: [PATCH] clk: bcm2835: Register the DSI0/DSI1 pixel clocks. - -The DSI pixel clocks are muxed from clocks generated in the analog phy -by the DSI driver. In order to set them as parents, we need to do the -same name lookup dance on them as we do for our root oscillator. - -Signed-off-by: Eric Anholt -Signed-off-by: Stephen Boyd -(cherry picked from commit 8a39e9fa578229fd4604266c6ebb1a3a77d7994c) ---- - .../bindings/clock/brcm,bcm2835-cprman.txt | 15 ++- - drivers/clk/bcm/clk-bcm2835.c | 121 +++++++++++++++++++-- - include/dt-bindings/clock/bcm2835.h | 2 + - 3 files changed, 125 insertions(+), 13 deletions(-) - ---- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt -+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt -@@ -16,7 +16,20 @@ Required properties: - - #clock-cells: Should be <1>. The permitted clock-specifier values can be - found in include/dt-bindings/clock/bcm2835.h - - reg: Specifies base physical address and size of the registers --- clocks: The external oscillator clock phandle -+- clocks: phandles to the parent clocks used as input to the module, in -+ the following order: -+ -+ - External oscillator -+ - DSI0 byte clock -+ - DSI0 DDR2 clock -+ - DSI0 DDR clock -+ - DSI1 byte clock -+ - DSI1 DDR2 clock -+ - DSI1 DDR clock -+ -+ Only external oscillator is required. The DSI clocks may -+ not be present, in which case their children will be -+ unusable. - - Example: - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -297,11 +297,32 @@ - #define LOCK_TIMEOUT_NS 100000000 - #define BCM2835_MAX_FB_RATE 1750000000u - -+/* -+ * Names of clocks used within the driver that need to be replaced -+ * with an external parent's name. This array is in the order that -+ * the clocks node in the DT references external clocks. -+ */ -+static const char *const cprman_parent_names[] = { -+ "xosc", -+ "dsi0_byte", -+ "dsi0_ddr2", -+ "dsi0_ddr", -+ "dsi1_byte", -+ "dsi1_ddr2", -+ "dsi1_ddr", -+}; -+ - struct bcm2835_cprman { - struct device *dev; - void __iomem *regs; - spinlock_t regs_lock; /* spinlock for all clocks */ -- const char *osc_name; -+ -+ /* -+ * Real names of cprman clock parents looked up through -+ * of_clk_get_parent_name(), which will be used in the -+ * parent_names[] arrays for clock registration. -+ */ -+ const char *real_parent_names[ARRAY_SIZE(cprman_parent_names)]; - - /* Must be last */ - struct clk_hw_onecell_data onecell; -@@ -907,6 +928,9 @@ static long bcm2835_clock_rate_from_divi - const struct bcm2835_clock_data *data = clock->data; - u64 temp; - -+ if (data->int_bits == 0 && data->frac_bits == 0) -+ return parent_rate; -+ - /* - * The divisor is a 12.12 fixed point field, but only some of - * the bits are populated in any given clock. -@@ -930,7 +954,12 @@ static unsigned long bcm2835_clock_get_r - struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); - struct bcm2835_cprman *cprman = clock->cprman; - const struct bcm2835_clock_data *data = clock->data; -- u32 div = cprman_read(cprman, data->div_reg); -+ u32 div; -+ -+ if (data->int_bits == 0 && data->frac_bits == 0) -+ return parent_rate; -+ -+ div = cprman_read(cprman, data->div_reg); - - return bcm2835_clock_rate_from_divisor(clock, parent_rate, div); - } -@@ -1209,7 +1238,7 @@ static struct clk_hw *bcm2835_register_p - memset(&init, 0, sizeof(init)); - - /* All of the PLLs derive from the external oscillator. */ -- init.parent_names = &cprman->osc_name; -+ init.parent_names = &cprman->real_parent_names[0]; - init.num_parents = 1; - init.name = data->name; - init.ops = &bcm2835_pll_clk_ops; -@@ -1295,18 +1324,22 @@ static struct clk_hw *bcm2835_register_c - struct bcm2835_clock *clock; - struct clk_init_data init; - const char *parents[1 << CM_SRC_BITS]; -- size_t i; -+ size_t i, j; - int ret; - - /* -- * Replace our "xosc" references with the oscillator's -- * actual name. -+ * Replace our strings referencing parent clocks with the -+ * actual clock-output-name of the parent. - */ - for (i = 0; i < data->num_mux_parents; i++) { -- if (strcmp(data->parents[i], "xosc") == 0) -- parents[i] = cprman->osc_name; -- else -- parents[i] = data->parents[i]; -+ parents[i] = data->parents[i]; -+ -+ for (j = 0; j < ARRAY_SIZE(cprman_parent_names); j++) { -+ if (strcmp(parents[i], cprman_parent_names[j]) == 0) { -+ parents[i] = cprman->real_parent_names[j]; -+ break; -+ } -+ } - } - - memset(&init, 0, sizeof(init)); -@@ -1442,6 +1475,47 @@ static const char *const bcm2835_clock_v - __VA_ARGS__) - - /* -+ * DSI parent clocks. The DSI byte/DDR/DDR2 clocks come from the DSI -+ * analog PHY. The _inv variants are generated internally to cprman, -+ * but we don't use them so they aren't hooked up. -+ */ -+static const char *const bcm2835_clock_dsi0_parents[] = { -+ "gnd", -+ "xosc", -+ "testdebug0", -+ "testdebug1", -+ "dsi0_ddr", -+ "dsi0_ddr_inv", -+ "dsi0_ddr2", -+ "dsi0_ddr2_inv", -+ "dsi0_byte", -+ "dsi0_byte_inv", -+}; -+ -+static const char *const bcm2835_clock_dsi1_parents[] = { -+ "gnd", -+ "xosc", -+ "testdebug0", -+ "testdebug1", -+ "dsi1_ddr", -+ "dsi1_ddr_inv", -+ "dsi1_ddr2", -+ "dsi1_ddr2_inv", -+ "dsi1_byte", -+ "dsi1_byte_inv", -+}; -+ -+#define REGISTER_DSI0_CLK(...) REGISTER_CLK( \ -+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_dsi0_parents), \ -+ .parents = bcm2835_clock_dsi0_parents, \ -+ __VA_ARGS__) -+ -+#define REGISTER_DSI1_CLK(...) REGISTER_CLK( \ -+ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_dsi1_parents), \ -+ .parents = bcm2835_clock_dsi1_parents, \ -+ __VA_ARGS__) -+ -+/* - * the real definition of all the pll, pll_dividers and clocks - * these make use of the above REGISTER_* macros - */ -@@ -1904,6 +1978,18 @@ static const struct bcm2835_clk_desc clk - .div_reg = CM_DSI1EDIV, - .int_bits = 4, - .frac_bits = 8), -+ [BCM2835_CLOCK_DSI0P] = REGISTER_DSI0_CLK( -+ .name = "dsi0p", -+ .ctl_reg = CM_DSI0PCTL, -+ .div_reg = CM_DSI0PDIV, -+ .int_bits = 0, -+ .frac_bits = 0), -+ [BCM2835_CLOCK_DSI1P] = REGISTER_DSI1_CLK( -+ .name = "dsi1p", -+ .ctl_reg = CM_DSI1PCTL, -+ .div_reg = CM_DSI1PDIV, -+ .int_bits = 0, -+ .frac_bits = 0), - - /* the gates */ - -@@ -1962,8 +2048,19 @@ static int bcm2835_clk_probe(struct plat - if (IS_ERR(cprman->regs)) - return PTR_ERR(cprman->regs); - -- cprman->osc_name = of_clk_get_parent_name(dev->of_node, 0); -- if (!cprman->osc_name) -+ memcpy(cprman->real_parent_names, cprman_parent_names, -+ sizeof(cprman_parent_names)); -+ of_clk_parent_fill(dev->of_node, cprman->real_parent_names, -+ ARRAY_SIZE(cprman_parent_names)); -+ -+ /* -+ * Make sure the external oscillator has been registered. -+ * -+ * The other (DSI) clocks are not present on older device -+ * trees, which we still need to support for backwards -+ * compatibility. -+ */ -+ if (!cprman->real_parent_names[0]) - return -ENODEV; - - platform_set_drvdata(pdev, cprman); ---- a/include/dt-bindings/clock/bcm2835.h -+++ b/include/dt-bindings/clock/bcm2835.h -@@ -64,3 +64,5 @@ - #define BCM2835_CLOCK_CAM1 46 - #define BCM2835_CLOCK_DSI0E 47 - #define BCM2835_CLOCK_DSI1E 48 -+#define BCM2835_CLOCK_DSI0P 49 -+#define BCM2835_CLOCK_DSI1P 50 diff --git a/target/linux/brcm2708/patches-4.9/0157-clk-bcm2835-Add-leaf-clock-measurement-support-disab.patch b/target/linux/brcm2708/patches-4.9/0157-clk-bcm2835-Add-leaf-clock-measurement-support-disab.patch deleted file mode 100644 index 16c5ec5cbf54..000000000000 --- a/target/linux/brcm2708/patches-4.9/0157-clk-bcm2835-Add-leaf-clock-measurement-support-disab.patch +++ /dev/null @@ -1,346 +0,0 @@ -From 546bac0479e51024027f8c8820f912573643b101 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 18 Jan 2017 07:31:57 +1100 -Subject: [PATCH] clk: bcm2835: Add leaf clock measurement support, disabled by - default - -This proved incredibly useful during debugging of the DSI driver, to -see if our clocks were running at rate we requested. Let's leave it -here for the next person interacting with clocks on the platform (and -so that hopefully we can just hook it up to debugfs some day). - -Signed-off-by: Eric Anholt -Signed-off-by: Stephen Boyd -(cherry picked from commit 3f9195811d8d829556c4cd88d3f9e56a80d5ba60) ---- - drivers/clk/bcm/clk-bcm2835.c | 144 ++++++++++++++++++++++++++++++++++-------- - 1 file changed, 119 insertions(+), 25 deletions(-) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -39,6 +39,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -98,7 +99,8 @@ - #define CM_SMIDIV 0x0b4 - /* no definition for 0x0b8 and 0x0bc */ - #define CM_TCNTCTL 0x0c0 --#define CM_TCNTDIV 0x0c4 -+# define CM_TCNT_SRC1_SHIFT 12 -+#define CM_TCNTCNT 0x0c4 - #define CM_TECCTL 0x0c8 - #define CM_TECDIV 0x0cc - #define CM_TD0CTL 0x0d0 -@@ -338,6 +340,61 @@ static inline u32 cprman_read(struct bcm - return readl(cprman->regs + reg); - } - -+/* Does a cycle of measuring a clock through the TCNT clock, which may -+ * source from many other clocks in the system. -+ */ -+static unsigned long bcm2835_measure_tcnt_mux(struct bcm2835_cprman *cprman, -+ u32 tcnt_mux) -+{ -+ u32 osccount = 19200; /* 1ms */ -+ u32 count; -+ ktime_t timeout; -+ -+ spin_lock(&cprman->regs_lock); -+ -+ cprman_write(cprman, CM_TCNTCTL, CM_KILL); -+ -+ cprman_write(cprman, CM_TCNTCTL, -+ (tcnt_mux & CM_SRC_MASK) | -+ (tcnt_mux >> CM_SRC_BITS) << CM_TCNT_SRC1_SHIFT); -+ -+ cprman_write(cprman, CM_OSCCOUNT, osccount); -+ -+ /* do a kind delay at the start */ -+ mdelay(1); -+ -+ /* Finish off whatever is left of OSCCOUNT */ -+ timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS); -+ while (cprman_read(cprman, CM_OSCCOUNT)) { -+ if (ktime_after(ktime_get(), timeout)) { -+ dev_err(cprman->dev, "timeout waiting for OSCCOUNT\n"); -+ count = 0; -+ goto out; -+ } -+ cpu_relax(); -+ } -+ -+ /* Wait for BUSY to clear. */ -+ timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS); -+ while (cprman_read(cprman, CM_TCNTCTL) & CM_BUSY) { -+ if (ktime_after(ktime_get(), timeout)) { -+ dev_err(cprman->dev, "timeout waiting for !BUSY\n"); -+ count = 0; -+ goto out; -+ } -+ cpu_relax(); -+ } -+ -+ count = cprman_read(cprman, CM_TCNTCNT); -+ -+ cprman_write(cprman, CM_TCNTCTL, 0); -+ -+out: -+ spin_unlock(&cprman->regs_lock); -+ -+ return count * 1000; -+} -+ - static int bcm2835_debugfs_regset(struct bcm2835_cprman *cprman, u32 base, - struct debugfs_reg32 *regs, size_t nregs, - struct dentry *dentry) -@@ -473,6 +530,8 @@ struct bcm2835_clock_data { - - bool is_vpu_clock; - bool is_mash_clock; -+ -+ u32 tcnt_mux; - }; - - struct bcm2835_gate_data { -@@ -1008,6 +1067,17 @@ static int bcm2835_clock_on(struct clk_h - CM_GATE); - spin_unlock(&cprman->regs_lock); - -+ /* Debug code to measure the clock once it's turned on to see -+ * if it's ticking at the rate we expect. -+ */ -+ if (data->tcnt_mux && false) { -+ dev_info(cprman->dev, -+ "clk %s: rate %ld, measure %ld\n", -+ data->name, -+ clk_hw_get_rate(hw), -+ bcm2835_measure_tcnt_mux(cprman, data->tcnt_mux)); -+ } -+ - return 0; - } - -@@ -1774,7 +1844,8 @@ static const struct bcm2835_clk_desc clk - .ctl_reg = CM_OTPCTL, - .div_reg = CM_OTPDIV, - .int_bits = 4, -- .frac_bits = 0), -+ .frac_bits = 0, -+ .tcnt_mux = 6), - /* - * Used for a 1Mhz clock for the system clocksource, and also used - * bythe watchdog timer and the camera pulse generator. -@@ -1808,13 +1879,15 @@ static const struct bcm2835_clk_desc clk - .ctl_reg = CM_H264CTL, - .div_reg = CM_H264DIV, - .int_bits = 4, -- .frac_bits = 8), -+ .frac_bits = 8, -+ .tcnt_mux = 1), - [BCM2835_CLOCK_ISP] = REGISTER_VPU_CLK( - .name = "isp", - .ctl_reg = CM_ISPCTL, - .div_reg = CM_ISPDIV, - .int_bits = 4, -- .frac_bits = 8), -+ .frac_bits = 8, -+ .tcnt_mux = 2), - - /* - * Secondary SDRAM clock. Used for low-voltage modes when the PLL -@@ -1825,13 +1898,15 @@ static const struct bcm2835_clk_desc clk - .ctl_reg = CM_SDCCTL, - .div_reg = CM_SDCDIV, - .int_bits = 6, -- .frac_bits = 0), -+ .frac_bits = 0, -+ .tcnt_mux = 3), - [BCM2835_CLOCK_V3D] = REGISTER_VPU_CLK( - .name = "v3d", - .ctl_reg = CM_V3DCTL, - .div_reg = CM_V3DDIV, - .int_bits = 4, -- .frac_bits = 8), -+ .frac_bits = 8, -+ .tcnt_mux = 4), - /* - * VPU clock. This doesn't have an enable bit, since it drives - * the bus for everything else, and is special so it doesn't need -@@ -1845,7 +1920,8 @@ static const struct bcm2835_clk_desc clk - .int_bits = 12, - .frac_bits = 8, - .flags = CLK_IS_CRITICAL, -- .is_vpu_clock = true), -+ .is_vpu_clock = true, -+ .tcnt_mux = 5), - - /* clocks with per parent mux */ - [BCM2835_CLOCK_AVEO] = REGISTER_PER_CLK( -@@ -1853,19 +1929,22 @@ static const struct bcm2835_clk_desc clk - .ctl_reg = CM_AVEOCTL, - .div_reg = CM_AVEODIV, - .int_bits = 4, -- .frac_bits = 0), -+ .frac_bits = 0, -+ .tcnt_mux = 38), - [BCM2835_CLOCK_CAM0] = REGISTER_PER_CLK( - .name = "cam0", - .ctl_reg = CM_CAM0CTL, - .div_reg = CM_CAM0DIV, - .int_bits = 4, -- .frac_bits = 8), -+ .frac_bits = 8, -+ .tcnt_mux = 14), - [BCM2835_CLOCK_CAM1] = REGISTER_PER_CLK( - .name = "cam1", - .ctl_reg = CM_CAM1CTL, - .div_reg = CM_CAM1DIV, - .int_bits = 4, -- .frac_bits = 8), -+ .frac_bits = 8, -+ .tcnt_mux = 15), - [BCM2835_CLOCK_DFT] = REGISTER_PER_CLK( - .name = "dft", - .ctl_reg = CM_DFTCTL, -@@ -1877,7 +1956,8 @@ static const struct bcm2835_clk_desc clk - .ctl_reg = CM_DPICTL, - .div_reg = CM_DPIDIV, - .int_bits = 4, -- .frac_bits = 8), -+ .frac_bits = 8, -+ .tcnt_mux = 17), - - /* Arasan EMMC clock */ - [BCM2835_CLOCK_EMMC] = REGISTER_PER_CLK( -@@ -1885,7 +1965,8 @@ static const struct bcm2835_clk_desc clk - .ctl_reg = CM_EMMCCTL, - .div_reg = CM_EMMCDIV, - .int_bits = 4, -- .frac_bits = 8), -+ .frac_bits = 8, -+ .tcnt_mux = 39), - - /* General purpose (GPIO) clocks */ - [BCM2835_CLOCK_GP0] = REGISTER_PER_CLK( -@@ -1894,7 +1975,8 @@ static const struct bcm2835_clk_desc clk - .div_reg = CM_GP0DIV, - .int_bits = 12, - .frac_bits = 12, -- .is_mash_clock = true), -+ .is_mash_clock = true, -+ .tcnt_mux = 20), - [BCM2835_CLOCK_GP1] = REGISTER_PER_CLK( - .name = "gp1", - .ctl_reg = CM_GP1CTL, -@@ -1902,7 +1984,8 @@ static const struct bcm2835_clk_desc clk - .int_bits = 12, - .frac_bits = 12, - .flags = CLK_IS_CRITICAL, -- .is_mash_clock = true), -+ .is_mash_clock = true, -+ .tcnt_mux = 21), - [BCM2835_CLOCK_GP2] = REGISTER_PER_CLK( - .name = "gp2", - .ctl_reg = CM_GP2CTL, -@@ -1917,40 +2000,46 @@ static const struct bcm2835_clk_desc clk - .ctl_reg = CM_HSMCTL, - .div_reg = CM_HSMDIV, - .int_bits = 4, -- .frac_bits = 8), -+ .frac_bits = 8, -+ .tcnt_mux = 22), - [BCM2835_CLOCK_PCM] = REGISTER_PER_CLK( - .name = "pcm", - .ctl_reg = CM_PCMCTL, - .div_reg = CM_PCMDIV, - .int_bits = 12, - .frac_bits = 12, -- .is_mash_clock = true), -+ .is_mash_clock = true, -+ .tcnt_mux = 23), - [BCM2835_CLOCK_PWM] = REGISTER_PER_CLK( - .name = "pwm", - .ctl_reg = CM_PWMCTL, - .div_reg = CM_PWMDIV, - .int_bits = 12, - .frac_bits = 12, -- .is_mash_clock = true), -+ .is_mash_clock = true, -+ .tcnt_mux = 24), - [BCM2835_CLOCK_SLIM] = REGISTER_PER_CLK( - .name = "slim", - .ctl_reg = CM_SLIMCTL, - .div_reg = CM_SLIMDIV, - .int_bits = 12, - .frac_bits = 12, -- .is_mash_clock = true), -+ .is_mash_clock = true, -+ .tcnt_mux = 25), - [BCM2835_CLOCK_SMI] = REGISTER_PER_CLK( - .name = "smi", - .ctl_reg = CM_SMICTL, - .div_reg = CM_SMIDIV, - .int_bits = 4, -- .frac_bits = 8), -+ .frac_bits = 8, -+ .tcnt_mux = 27), - [BCM2835_CLOCK_UART] = REGISTER_PER_CLK( - .name = "uart", - .ctl_reg = CM_UARTCTL, - .div_reg = CM_UARTDIV, - .int_bits = 10, -- .frac_bits = 12), -+ .frac_bits = 12, -+ .tcnt_mux = 28), - - /* TV encoder clock. Only operating frequency is 108Mhz. */ - [BCM2835_CLOCK_VEC] = REGISTER_PER_CLK( -@@ -1963,7 +2052,8 @@ static const struct bcm2835_clk_desc clk - * Allow rate change propagation only on PLLH_AUX which is - * assigned index 7 in the parent array. - */ -- .set_rate_parent = BIT(7)), -+ .set_rate_parent = BIT(7), -+ .tcnt_mux = 29), - - /* dsi clocks */ - [BCM2835_CLOCK_DSI0E] = REGISTER_PER_CLK( -@@ -1971,25 +2061,29 @@ static const struct bcm2835_clk_desc clk - .ctl_reg = CM_DSI0ECTL, - .div_reg = CM_DSI0EDIV, - .int_bits = 4, -- .frac_bits = 8), -+ .frac_bits = 8, -+ .tcnt_mux = 18), - [BCM2835_CLOCK_DSI1E] = REGISTER_PER_CLK( - .name = "dsi1e", - .ctl_reg = CM_DSI1ECTL, - .div_reg = CM_DSI1EDIV, - .int_bits = 4, -- .frac_bits = 8), -+ .frac_bits = 8, -+ .tcnt_mux = 19), - [BCM2835_CLOCK_DSI0P] = REGISTER_DSI0_CLK( - .name = "dsi0p", - .ctl_reg = CM_DSI0PCTL, - .div_reg = CM_DSI0PDIV, - .int_bits = 0, -- .frac_bits = 0), -+ .frac_bits = 0, -+ .tcnt_mux = 12), - [BCM2835_CLOCK_DSI1P] = REGISTER_DSI1_CLK( - .name = "dsi1p", - .ctl_reg = CM_DSI1PCTL, - .div_reg = CM_DSI1PDIV, - .int_bits = 0, -- .frac_bits = 0), -+ .frac_bits = 0, -+ .tcnt_mux = 13), - - /* the gates */ - diff --git a/target/linux/brcm2708/patches-4.9/0158-drm-panel-Add-support-for-the-Raspberry-Pi-7-Touchsc.patch b/target/linux/brcm2708/patches-4.9/0158-drm-panel-Add-support-for-the-Raspberry-Pi-7-Touchsc.patch deleted file mode 100644 index 027e5c07e5c0..000000000000 --- a/target/linux/brcm2708/patches-4.9/0158-drm-panel-Add-support-for-the-Raspberry-Pi-7-Touchsc.patch +++ /dev/null @@ -1,575 +0,0 @@ -From e2d195723ec030733cdaf623c9419af5f308b230 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Tue, 26 Apr 2016 13:46:13 -0700 -Subject: [PATCH] drm/panel: Add support for the Raspberry Pi 7" Touchscreen. - -This driver communicates with the Atmel microcontroller for sequencing -the poweron of the TC358762 DSI-DPI bridge and controlling the -backlight PWM. - -The following lines are required in config.txt, to keep the firmware -from trying to bash our I2C lines and steal the DSI interrupts: - - disable_touchscreen=1 - ignore_lcd=2 - mask_gpu_interrupt1=0x1000 - -This means that the firmware won't power on the panel at boot time (no -rainbow) and the touchscreen input won't work. The native input -driver for the touchscreen still needs to be written. - -v2: Set the same default orientation as the closed source firmware - used, which is the best for viewing angle. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/panel/Kconfig | 8 + - drivers/gpu/drm/panel/Makefile | 1 + - .../gpu/drm/panel/panel-raspberrypi-touchscreen.c | 514 +++++++++++++++++++++ - 3 files changed, 523 insertions(+) - create mode 100644 drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c - ---- a/drivers/gpu/drm/panel/Kconfig -+++ b/drivers/gpu/drm/panel/Kconfig -@@ -52,6 +52,14 @@ config DRM_PANEL_PANASONIC_VVX10F034N00 - WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some - Xperia Z2 tablets - -+config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN -+ tristate "Raspberry Pi 7-inch touchscreen panel" -+ depends on DRM_MIPI_DSI -+ help -+ Say Y here if you want to enable support for the Raspberry -+ Pi 7" Touchscreen. To compile this driver as a module, -+ choose M here. -+ - config DRM_PANEL_SAMSUNG_S6E8AA0 - tristate "Samsung S6E8AA0 DSI video mode panel" - depends on OF ---- a/drivers/gpu/drm/panel/Makefile -+++ b/drivers/gpu/drm/panel/Makefile -@@ -2,6 +2,7 @@ obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel- - obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o - obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o - obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o -+obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o - obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o - obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o - obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o ---- /dev/null -+++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c -@@ -0,0 +1,514 @@ -+/* -+ * Copyright © 2016 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * Portions of this file (derived from panel-simple.c) are: -+ * -+ * Copyright (C) 2013, NVIDIA Corporation. All rights reserved. -+ * -+ * Permission is hereby granted, free of charge, to any person obtaining a -+ * copy of this software and associated documentation files (the "Software"), -+ * to deal in the Software without restriction, including without limitation -+ * the rights to use, copy, modify, merge, publish, distribute, sub license, -+ * and/or sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following conditions: -+ * -+ * The above copyright notice and this permission notice (including the -+ * next paragraph) shall be included in all copies or substantial portions -+ * of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL -+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER -+ * DEALINGS IN THE SOFTWARE. -+ */ -+ -+/** -+ * DOC: Raspberry Pi 7" touchscreen panel driver. -+ * -+ * The 7" touchscreen consists of a DPI LCD panel, a Toshiba -+ * TC358762XBG DSI-DPI bridge, and an I2C-connected Atmel ATTINY88-MUR -+ * controlling power management, the LCD PWM, and the touchscreen. -+ * -+ * This driver presents this device as a MIPI DSI panel to the DRM -+ * driver, and should expose the touchscreen as a HID device. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+/* I2C registers of the Atmel microcontroller. */ -+enum REG_ADDR { -+ REG_ID = 0x80, -+ REG_PORTA, // BIT(2) for horizontal flip, BIT(3) for vertical flip -+ REG_PORTB, -+ REG_PORTC, -+ REG_PORTD, -+ REG_POWERON, -+ REG_PWM, -+ REG_DDRA, -+ REG_DDRB, -+ REG_DDRC, -+ REG_DDRD, -+ REG_TEST, -+ REG_WR_ADDRL, -+ REG_WR_ADDRH, -+ REG_READH, -+ REG_READL, -+ REG_WRITEH, -+ REG_WRITEL, -+ REG_ID2, -+}; -+ -+/* We only turn the PWM on or off, without varying values. */ -+#define RPI_TOUCHSCREEN_MAX_BRIGHTNESS 1 -+ -+/* DSI D-PHY Layer Registers */ -+#define D0W_DPHYCONTTX 0x0004 -+#define CLW_DPHYCONTRX 0x0020 -+#define D0W_DPHYCONTRX 0x0024 -+#define D1W_DPHYCONTRX 0x0028 -+#define COM_DPHYCONTRX 0x0038 -+#define CLW_CNTRL 0x0040 -+#define D0W_CNTRL 0x0044 -+#define D1W_CNTRL 0x0048 -+#define DFTMODE_CNTRL 0x0054 -+ -+/* DSI PPI Layer Registers */ -+#define PPI_STARTPPI 0x0104 -+#define PPI_BUSYPPI 0x0108 -+#define PPI_LINEINITCNT 0x0110 -+#define PPI_LPTXTIMECNT 0x0114 -+//#define PPI_LANEENABLE 0x0134 -+//#define PPI_TX_RX_TA 0x013C -+#define PPI_CLS_ATMR 0x0140 -+#define PPI_D0S_ATMR 0x0144 -+#define PPI_D1S_ATMR 0x0148 -+#define PPI_D0S_CLRSIPOCOUNT 0x0164 -+#define PPI_D1S_CLRSIPOCOUNT 0x0168 -+#define CLS_PRE 0x0180 -+#define D0S_PRE 0x0184 -+#define D1S_PRE 0x0188 -+#define CLS_PREP 0x01A0 -+#define D0S_PREP 0x01A4 -+#define D1S_PREP 0x01A8 -+#define CLS_ZERO 0x01C0 -+#define D0S_ZERO 0x01C4 -+#define D1S_ZERO 0x01C8 -+#define PPI_CLRFLG 0x01E0 -+#define PPI_CLRSIPO 0x01E4 -+#define HSTIMEOUT 0x01F0 -+#define HSTIMEOUTENABLE 0x01F4 -+ -+/* DSI Protocol Layer Registers */ -+#define DSI_STARTDSI 0x0204 -+#define DSI_BUSYDSI 0x0208 -+#define DSI_LANEENABLE 0x0210 -+# define DSI_LANEENABLE_CLOCK BIT(0) -+# define DSI_LANEENABLE_D0 BIT(1) -+# define DSI_LANEENABLE_D1 BIT(2) -+ -+#define DSI_LANESTATUS0 0x0214 -+#define DSI_LANESTATUS1 0x0218 -+#define DSI_INTSTATUS 0x0220 -+#define DSI_INTMASK 0x0224 -+#define DSI_INTCLR 0x0228 -+#define DSI_LPTXTO 0x0230 -+#define DSI_MODE 0x0260 -+#define DSI_PAYLOAD0 0x0268 -+#define DSI_PAYLOAD1 0x026C -+#define DSI_SHORTPKTDAT 0x0270 -+#define DSI_SHORTPKTREQ 0x0274 -+#define DSI_BTASTA 0x0278 -+#define DSI_BTACLR 0x027C -+ -+/* DSI General Registers */ -+#define DSIERRCNT 0x0300 -+#define DSISIGMOD 0x0304 -+ -+/* DSI Application Layer Registers */ -+#define APLCTRL 0x0400 -+#define APLSTAT 0x0404 -+#define APLERR 0x0408 -+#define PWRMOD 0x040C -+#define RDPKTLN 0x0410 -+#define PXLFMT 0x0414 -+#define MEMWRCMD 0x0418 -+ -+/* LCDC/DPI Host Registers */ -+#define LCDCTRL 0x0420 -+#define HSR 0x0424 -+#define HDISPR 0x0428 -+#define VSR 0x042C -+#define VDISPR 0x0430 -+#define VFUEN 0x0434 -+ -+/* DBI-B Host Registers */ -+#define DBIBCTRL 0x0440 -+ -+/* SPI Master Registers */ -+#define SPICMR 0x0450 -+#define SPITCR 0x0454 -+ -+/* System Controller Registers */ -+#define SYSSTAT 0x0460 -+#define SYSCTRL 0x0464 -+#define SYSPLL1 0x0468 -+#define SYSPLL2 0x046C -+#define SYSPLL3 0x0470 -+#define SYSPMCTRL 0x047C -+ -+/* GPIO Registers */ -+#define GPIOC 0x0480 -+#define GPIOO 0x0484 -+#define GPIOI 0x0488 -+ -+/* I2C Registers */ -+#define I2CCLKCTRL 0x0490 -+ -+/* Chip/Rev Registers */ -+#define IDREG 0x04A0 -+ -+/* Debug Registers */ -+#define WCMDQUEUE 0x0500 -+#define RCMDQUEUE 0x0504 -+ -+struct rpi_touchscreen { -+ struct drm_panel base; -+ struct mipi_dsi_device *dsi; -+ struct i2c_client *bridge_i2c; -+ -+ /* Version of the firmware on the bridge chip */ -+ int atmel_ver; -+}; -+ -+static const struct drm_display_mode rpi_touchscreen_modes[] = { -+ { -+ /* The DSI PLL can only integer divide from the 2Ghz -+ * PLLD, giving us few choices. We pick a divide by 3 -+ * as our DSI HS clock, giving us a pixel clock of -+ * that divided by 24 bits. Pad out HFP to get our -+ * panel to refresh at 60Hz, even if that doesn't -+ * match the datasheet. -+ */ -+#define PIXEL_CLOCK ((2000000000 / 3) / 24) -+#define VREFRESH 60 -+#define VTOTAL (480 + 7 + 2 + 21) -+#define HACT 800 -+#define HSW 2 -+#define HBP 46 -+#define HFP ((PIXEL_CLOCK / (VTOTAL * VREFRESH)) - (HACT + HSW + HBP)) -+ -+ .clock = PIXEL_CLOCK / 1000, -+ .hdisplay = HACT, -+ .hsync_start = HACT + HFP, -+ .hsync_end = HACT + HFP + HSW, -+ .htotal = HACT + HFP + HSW + HBP, -+ .vdisplay = 480, -+ .vsync_start = 480 + 7, -+ .vsync_end = 480 + 7 + 2, -+ .vtotal = VTOTAL, -+ .vrefresh = 60, -+ }, -+}; -+ -+static struct rpi_touchscreen *panel_to_ts(struct drm_panel *panel) -+{ -+ return container_of(panel, struct rpi_touchscreen, base); -+} -+ -+static u8 rpi_touchscreen_i2c_read(struct rpi_touchscreen *ts, u8 reg) -+{ -+ return i2c_smbus_read_byte_data(ts->bridge_i2c, reg); -+} -+ -+static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts, -+ u8 reg, u8 val) -+{ -+ int ret; -+ -+ ret = i2c_smbus_write_byte_data(ts->bridge_i2c, reg, val); -+ if (ret) -+ dev_err(&ts->dsi->dev, "I2C write failed: %d\n", ret); -+} -+ -+static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val) -+{ -+#if 0 -+ /* The firmware uses LP DSI transactions like this to bring up -+ * the hardware, which should be faster than using I2C to then -+ * pass to the Toshiba. However, I was unable to get it to -+ * work. -+ */ -+ u8 msg[] = { -+ reg, -+ reg >> 8, -+ val, -+ val >> 8, -+ val >> 16, -+ val >> 24, -+ }; -+ -+ mipi_dsi_dcs_write_buffer(ts->dsi, msg, sizeof(msg)); -+#else -+ rpi_touchscreen_i2c_write(ts, REG_WR_ADDRH, reg >> 8); -+ rpi_touchscreen_i2c_write(ts, REG_WR_ADDRL, reg); -+ rpi_touchscreen_i2c_write(ts, REG_WRITEH, val >> 8); -+ rpi_touchscreen_i2c_write(ts, REG_WRITEL, val); -+#endif -+ -+ return 0; -+} -+ -+static int rpi_touchscreen_disable(struct drm_panel *panel) -+{ -+ struct rpi_touchscreen *ts = panel_to_ts(panel); -+ -+ rpi_touchscreen_i2c_write(ts, REG_PWM, 0); -+ -+ rpi_touchscreen_i2c_write(ts, REG_POWERON, 0); -+ udelay(1); -+ -+ return 0; -+} -+ -+static int rpi_touchscreen_noop(struct drm_panel *panel) -+{ -+ return 0; -+} -+ -+static int rpi_touchscreen_enable(struct drm_panel *panel) -+{ -+ struct rpi_touchscreen *ts = panel_to_ts(panel); -+ int i; -+ -+ rpi_touchscreen_i2c_write(ts, REG_POWERON, 1); -+ /* Wait for nPWRDWN to go low to indicate poweron is done. */ -+ for (i = 0; i < 100; i++) { -+ if (rpi_touchscreen_i2c_read(ts, REG_PORTB) & 1) -+ break; -+ } -+ -+ rpi_touchscreen_write(ts, DSI_LANEENABLE, -+ DSI_LANEENABLE_CLOCK | -+ DSI_LANEENABLE_D0 | -+ (ts->dsi->lanes > 1 ? DSI_LANEENABLE_D1 : 0)); -+ rpi_touchscreen_write(ts, PPI_D0S_CLRSIPOCOUNT, 0x05); -+ rpi_touchscreen_write(ts, PPI_D1S_CLRSIPOCOUNT, 0x05); -+ rpi_touchscreen_write(ts, PPI_D0S_ATMR, 0x00); -+ rpi_touchscreen_write(ts, PPI_D1S_ATMR, 0x00); -+ rpi_touchscreen_write(ts, PPI_LPTXTIMECNT, 0x03); -+ -+ rpi_touchscreen_write(ts, SPICMR, 0x00); -+ rpi_touchscreen_write(ts, LCDCTRL, 0x00100150); -+ rpi_touchscreen_write(ts, SYSCTRL, 0x040f); -+ msleep(100); -+ -+ rpi_touchscreen_write(ts, PPI_STARTPPI, 0x01); -+ rpi_touchscreen_write(ts, DSI_STARTDSI, 0x01); -+ msleep(100); -+ -+ /* Turn on the backlight. */ -+ rpi_touchscreen_i2c_write(ts, REG_PWM, 255); -+ -+ /* Default to the same orientation as the closed source -+ * firmware used for the panel. Runtime rotation -+ * configuration will be supported using VC4's plane -+ * orientation bits. -+ */ -+ rpi_touchscreen_i2c_write(ts, REG_PORTA, BIT(2)); -+ -+ return 0; -+} -+ -+static int rpi_touchscreen_get_modes(struct drm_panel *panel) -+{ -+ struct drm_connector *connector = panel->connector; -+ struct drm_device *drm = panel->drm; -+ unsigned int i, num = 0; -+ -+ for (i = 0; i < ARRAY_SIZE(rpi_touchscreen_modes); i++) { -+ const struct drm_display_mode *m = &rpi_touchscreen_modes[i]; -+ struct drm_display_mode *mode; -+ -+ mode = drm_mode_duplicate(drm, m); -+ if (!mode) { -+ dev_err(drm->dev, "failed to add mode %ux%u@%u\n", -+ m->hdisplay, m->vdisplay, m->vrefresh); -+ continue; -+ } -+ -+ mode->type |= DRM_MODE_TYPE_DRIVER; -+ -+ if (i == 0) -+ mode->type |= DRM_MODE_TYPE_PREFERRED; -+ -+ drm_mode_set_name(mode); -+ -+ drm_mode_probed_add(connector, mode); -+ num++; -+ } -+ -+ connector->display_info.bpc = 8; -+ connector->display_info.width_mm = 154; -+ connector->display_info.height_mm = 86; -+ -+ return num; -+} -+ -+static const struct drm_panel_funcs rpi_touchscreen_funcs = { -+ .disable = rpi_touchscreen_disable, -+ .unprepare = rpi_touchscreen_noop, -+ .prepare = rpi_touchscreen_noop, -+ .enable = rpi_touchscreen_enable, -+ .get_modes = rpi_touchscreen_get_modes, -+}; -+ -+static struct i2c_client *rpi_touchscreen_get_i2c(struct device *dev, -+ const char *name) -+{ -+ struct device_node *node; -+ struct i2c_client *client; -+ -+ node = of_parse_phandle(dev->of_node, name, 0); -+ if (!node) -+ return ERR_PTR(-ENODEV); -+ -+ client = of_find_i2c_device_by_node(node); -+ -+ of_node_put(node); -+ -+ return client; -+} -+ -+static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi) -+{ -+ struct device *dev = &dsi->dev; -+ struct rpi_touchscreen *ts; -+ int ret, ver; -+ -+ ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); -+ if (!ts) -+ return -ENOMEM; -+ -+ dev_set_drvdata(dev, ts); -+ -+ ts->dsi = dsi; -+ dsi->mode_flags = (MIPI_DSI_MODE_VIDEO | -+ MIPI_DSI_MODE_VIDEO_SYNC_PULSE | -+ MIPI_DSI_MODE_LPM); -+ dsi->format = MIPI_DSI_FMT_RGB888; -+ dsi->lanes = 1; -+ -+ ts->bridge_i2c = -+ rpi_touchscreen_get_i2c(dev, "raspberrypi,touchscreen-bridge"); -+ if (IS_ERR(ts->bridge_i2c)) { -+ ret = -EPROBE_DEFER; -+ return ret; -+ } -+ -+ ver = rpi_touchscreen_i2c_read(ts, REG_ID); -+ if (ver < 0) { -+ dev_err(dev, "Atmel I2C read failed: %d\n", ver); -+ return -ENODEV; -+ } -+ -+ switch (ver) { -+ case 0xde: -+ ts->atmel_ver = 1; -+ break; -+ case 0xc3: -+ ts->atmel_ver = 2; -+ break; -+ default: -+ dev_err(dev, "Unknown Atmel firmware revision: 0x%02x\n", ver); -+ return -ENODEV; -+ } -+ -+ /* Turn off at boot, so we can cleanly sequence powering on. */ -+ rpi_touchscreen_i2c_write(ts, REG_POWERON, 0); -+ -+ drm_panel_init(&ts->base); -+ ts->base.dev = dev; -+ ts->base.funcs = &rpi_touchscreen_funcs; -+ -+ ret = drm_panel_add(&ts->base); -+ if (ret < 0) -+ goto err_release_bridge; -+ -+ return mipi_dsi_attach(dsi); -+ -+err_release_bridge: -+ put_device(&ts->bridge_i2c->dev); -+ return ret; -+} -+ -+static int rpi_touchscreen_dsi_remove(struct mipi_dsi_device *dsi) -+{ -+ struct device *dev = &dsi->dev; -+ struct rpi_touchscreen *ts = dev_get_drvdata(dev); -+ int ret; -+ -+ ret = mipi_dsi_detach(dsi); -+ if (ret < 0) { -+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret); -+ return ret; -+ } -+ -+ drm_panel_detach(&ts->base); -+ drm_panel_remove(&ts->base); -+ -+ put_device(&ts->bridge_i2c->dev); -+ -+ return 0; -+} -+ -+static void rpi_touchscreen_dsi_shutdown(struct mipi_dsi_device *dsi) -+{ -+ struct device *dev = &dsi->dev; -+ struct rpi_touchscreen *ts = dev_get_drvdata(dev); -+ -+ rpi_touchscreen_i2c_write(ts, REG_POWERON, 0); -+} -+ -+static const struct of_device_id rpi_touchscreen_of_match[] = { -+ { .compatible = "raspberrypi,touchscreen" }, -+ { } /* sentinel */ -+}; -+MODULE_DEVICE_TABLE(of, rpi_touchscreen_of_match); -+ -+static struct mipi_dsi_driver rpi_touchscreen_driver = { -+ .driver = { -+ .name = "raspberrypi-touchscreen", -+ .of_match_table = rpi_touchscreen_of_match, -+ }, -+ .probe = rpi_touchscreen_dsi_probe, -+ .remove = rpi_touchscreen_dsi_remove, -+ .shutdown = rpi_touchscreen_dsi_shutdown, -+}; -+module_mipi_dsi_driver(rpi_touchscreen_driver); -+ -+MODULE_AUTHOR("Eric Anholt "); -+MODULE_DESCRIPTION("Raspberry Pi 7-inch touchscreen driver"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/0159-BCM270X-Add-the-DSI-panel-to-the-defconfig.patch b/target/linux/brcm2708/patches-4.9/0159-BCM270X-Add-the-DSI-panel-to-the-defconfig.patch deleted file mode 100644 index 1ba605bc39c9..000000000000 --- a/target/linux/brcm2708/patches-4.9/0159-BCM270X-Add-the-DSI-panel-to-the-defconfig.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 22f86bb2d3cb5275877fc4784d2f6c4f5cc660e9 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 2 Jun 2016 12:29:45 -0700 -Subject: [PATCH] BCM270X: Add the DSI panel to the defconfig. - -Signed-off-by: Eric Anholt ---- - arch/arm/configs/bcm2709_defconfig | 2 ++ - arch/arm/configs/bcmrpi_defconfig | 2 ++ - arch/arm64/configs/bcmrpi3_defconfig | 2 ++ - 3 files changed, 6 insertions(+) - ---- a/arch/arm/configs/bcm2709_defconfig -+++ b/arch/arm/configs/bcm2709_defconfig -@@ -833,6 +833,8 @@ CONFIG_VIDEO_OV7640=m - CONFIG_VIDEO_MT9V011=m - CONFIG_DRM=m - CONFIG_DRM_LOAD_EDID_FIRMWARE=y -+CONFIG_DRM_PANEL_SIMPLE=m -+CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m - CONFIG_DRM_UDL=m - CONFIG_DRM_VC4=m - CONFIG_FB=y ---- a/arch/arm/configs/bcmrpi_defconfig -+++ b/arch/arm/configs/bcmrpi_defconfig -@@ -827,6 +827,8 @@ CONFIG_VIDEO_OV7640=m - CONFIG_VIDEO_MT9V011=m - CONFIG_DRM=m - CONFIG_DRM_LOAD_EDID_FIRMWARE=y -+CONFIG_DRM_PANEL_SIMPLE=m -+CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m - CONFIG_DRM_UDL=m - CONFIG_DRM_VC4=m - CONFIG_FB=y ---- a/arch/arm64/configs/bcmrpi3_defconfig -+++ b/arch/arm64/configs/bcmrpi3_defconfig -@@ -816,6 +816,8 @@ CONFIG_VIDEO_OV7640=m - CONFIG_VIDEO_MT9V011=m - CONFIG_DRM=m - CONFIG_DRM_LOAD_EDID_FIRMWARE=y -+CONFIG_DRM_PANEL_SIMPLE=m -+CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m - CONFIG_DRM_UDL=m - CONFIG_DRM_VC4=m - CONFIG_FB=y diff --git a/target/linux/brcm2708/patches-4.9/0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch b/target/linux/brcm2708/patches-4.9/0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch deleted file mode 100644 index 444c287eedf1..000000000000 --- a/target/linux/brcm2708/patches-4.9/0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch +++ /dev/null @@ -1,101 +0,0 @@ -From fc25cd03ca1c696dacb74d2006c0f176ce800566 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Tue, 13 Dec 2016 15:15:10 -0800 -Subject: [PATCH] ARM: bcm2835: dt: Add the DSI module nodes and clocks. - -The modules stay disabled by default, and if you want to enable DSI -you'll need an overlay that connects a panel to it. - -Signed-off-by: Eric Anholt ---- - arch/arm/boot/dts/bcm2835-rpi.dtsi | 8 +++++++ - arch/arm/boot/dts/bcm283x.dtsi | 49 +++++++++++++++++++++++++++++++++++--- - 2 files changed, 54 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/bcm2835-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi -@@ -84,3 +84,11 @@ - power-domains = <&power RPI_POWER_DOMAIN_HDMI>; - status = "okay"; - }; -+ -+&dsi0 { -+ power-domains = <&power RPI_POWER_DOMAIN_DSI0>; -+}; -+ -+&dsi1 { -+ power-domains = <&power RPI_POWER_DOMAIN_DSI1>; -+}; ---- a/arch/arm/boot/dts/bcm283x.dtsi -+++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -93,10 +93,13 @@ - #clock-cells = <1>; - reg = <0x7e101000 0x2000>; - -- /* CPRMAN derives everything from the platform's -- * oscillator. -+ /* CPRMAN derives almost everything from the -+ * platform's oscillator. However, the DSI -+ * pixel clocks come from the DSI analog PHY. - */ -- clocks = <&clk_osc>; -+ clocks = <&clk_osc>, -+ <&dsi0 0>, <&dsi0 1>, <&dsi0 2>, -+ <&dsi1 0>, <&dsi1 1>, <&dsi1 2>; - }; - - rng@7e104000 { -@@ -188,6 +191,26 @@ - interrupts = <2 14>; /* pwa1 */ - }; - -+ dsi0: dsi@7e209000 { -+ compatible = "brcm,bcm2835-dsi0"; -+ reg = <0x7e209000 0x78>; -+ interrupts = <2 4>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ #clock-cells = <1>; -+ -+ clocks = <&clocks BCM2835_PLLA_DSI0>, -+ <&clocks BCM2835_CLOCK_DSI0E>, -+ <&clocks BCM2835_CLOCK_DSI0P>; -+ clock-names = "phy", "escape", "pixel"; -+ -+ clock-output-names = "dsi0_byte", -+ "dsi0_ddr2", -+ "dsi0_ddr"; -+ -+ status = "disabled"; -+ }; -+ - aux: aux@0x7e215000 { - compatible = "brcm,bcm2835-aux"; - #clock-cells = <1>; -@@ -247,6 +270,26 @@ - interrupts = <2 1>; - }; - -+ dsi1: dsi@7e700000 { -+ compatible = "brcm,bcm2835-dsi1"; -+ reg = <0x7e700000 0x8c>; -+ interrupts = <2 12>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ #clock-cells = <1>; -+ -+ clocks = <&clocks BCM2835_PLLD_DSI1>, -+ <&clocks BCM2835_CLOCK_DSI1E>, -+ <&clocks BCM2835_CLOCK_DSI1P>; -+ clock-names = "phy", "escape", "pixel"; -+ -+ clock-output-names = "dsi1_byte", -+ "dsi1_ddr2", -+ "dsi1_ddr"; -+ -+ status = "disabled"; -+ }; -+ - i2c1: i2c@7e804000 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e804000 0x1000>; diff --git a/target/linux/brcm2708/patches-4.9/0161-BCM270X-Enable-the-DSI-panel-node-in-the-VC4-overlay.patch b/target/linux/brcm2708/patches-4.9/0161-BCM270X-Enable-the-DSI-panel-node-in-the-VC4-overlay.patch deleted file mode 100644 index 3d65f5e2690e..000000000000 --- a/target/linux/brcm2708/patches-4.9/0161-BCM270X-Enable-the-DSI-panel-node-in-the-VC4-overlay.patch +++ /dev/null @@ -1,138 +0,0 @@ -From 2c62d430b6b3c20867e55465e0557a1543088f09 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 2 Jun 2016 15:09:35 -0700 -Subject: [PATCH] BCM270X: Enable the DSI panel node in the VC4 overlay. - -Signed-off-by: Eric Anholt ---- - arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 5 ++++ - arch/arm/boot/dts/bcm2708-rpi-b.dts | 5 ++++ - arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 5 ++++ - arch/arm/boot/dts/bcm270x.dtsi | 27 ++++++++++++++++++++++ - arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 5 ++++ - arch/arm/boot/dts/bcm2710.dtsi | 1 - - arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 22 ++++++++++++++++++ - 7 files changed, 69 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts -@@ -154,3 +154,8 @@ - sd_debug = <&sdhost>,"brcm,debug"; - }; - }; -+ -+&i2c_dsi { -+ gpios = <&gpio 28 0 -+ &gpio 29 0>; -+}; ---- a/arch/arm/boot/dts/bcm2708-rpi-b.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts -@@ -144,3 +144,8 @@ - sd_debug = <&sdhost>,"brcm,debug"; - }; - }; -+ -+&i2c_dsi { -+ gpios = <&gpio 2 0 -+ &gpio 3 0>; -+}; ---- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts -+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts -@@ -154,3 +154,8 @@ - sd_debug = <&sdhost>,"brcm,debug"; - }; - }; -+ -+&i2c_dsi { -+ gpios = <&gpio 28 0 -+ &gpio 29 0>; -+}; ---- a/arch/arm/boot/dts/bcm270x.dtsi -+++ b/arch/arm/boot/dts/bcm270x.dtsi -@@ -137,6 +137,29 @@ - /* Add alias */ - status = "disabled"; - }; -+ -+ i2c_dsi: i2cdsi { -+ /* We have to use i2c-gpio because the -+ * firmware is also polling another device -+ * using the only hardware I2C bus that could -+ * connect to these pins. -+ */ -+ compatible = "i2c-gpio"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ -+ pitouchscreen_bridge: bridge@45 { -+ compatible = "raspberrypi,touchscreen-bridge-i2c"; -+ reg = <0x45>; -+ }; -+ -+ pitouchscreen_touch: bridge@38 { -+ compatible = "raspberrypi,touchscreen-ts-i2c"; -+ reg = <0x38>; -+ }; -+ }; -+ - }; - - vdd_5v0_reg: fixedregulator_5v0 { -@@ -155,3 +178,7 @@ - regulator-always-on; - }; - }; -+ -+&dsi1 { -+ power-domains = <&power RPI_POWER_DOMAIN_DSI1>; -+}; ---- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -@@ -201,3 +201,8 @@ - sd_debug = <&sdhost>,"brcm,debug"; - }; - }; -+ -+&i2c_dsi { -+ gpios = <&gpio 44 0 -+ &gpio 45 0>; -+}; ---- a/arch/arm/boot/dts/bcm2710.dtsi -+++ b/arch/arm/boot/dts/bcm2710.dtsi -@@ -145,4 +145,3 @@ - interrupt-parent = <&local_intc>; - interrupts = <8>; - }; -- ---- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts -+++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts -@@ -126,6 +126,28 @@ - }; - }; - -+ fragment@16 { -+ target = <&dsi1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pitouchscreen: panel@0 { -+ compatible = "raspberrypi,touchscreen"; -+ reg = <0>; -+ raspberrypi,touchscreen-bridge = <&pitouchscreen_bridge>; -+ }; -+ }; -+ }; -+ -+ fragment@17 { -+ target = <&i2c_dsi>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ - __overrides__ { - cma-256 = <0>,"+0-1-2-3-4"; - cma-192 = <0>,"-0+1-2-3-4"; diff --git a/target/linux/brcm2708/patches-4.9/0162-drm-vc4-Fix-termination-of-the-initial-scan-for-bran.patch b/target/linux/brcm2708/patches-4.9/0162-drm-vc4-Fix-termination-of-the-initial-scan-for-bran.patch deleted file mode 100644 index 3326dca659c0..000000000000 --- a/target/linux/brcm2708/patches-4.9/0162-drm-vc4-Fix-termination-of-the-initial-scan-for-bran.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 57b0774967d7ea8d4173f82387100a84e4ba05d8 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 20 Oct 2016 16:48:12 -0700 -Subject: [PATCH] drm/vc4: Fix termination of the initial scan for branch - targets. - -The loop is scanning until the original max_ip (size of the BO), but -we want to not examine any code after the PROG_END's delay slots. -There was a block trying to do that, except that we had some early -continue statements if the signal wasn't a PROG_END or a BRANCH. - -The failure mode would be that a valid shader is rejected because some -undefined memory after the PROG_END slots is parsed as a branch and -the rest of its setup is illegal. I haven't seen this in the wild, -but valgrind was complaining when about this up in the userland -simulator mode. - -Signed-off-by: Eric Anholt -(cherry picked from commit 457e67a728696c4f8e6423c64e93def50530db9a) ---- - drivers/gpu/drm/vc4/vc4_validate_shaders.c | 19 ++++++++----------- - 1 file changed, 8 insertions(+), 11 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_validate_shaders.c -+++ b/drivers/gpu/drm/vc4/vc4_validate_shaders.c -@@ -608,9 +608,7 @@ static bool - vc4_validate_branches(struct vc4_shader_validation_state *validation_state) - { - uint32_t max_branch_target = 0; -- bool found_shader_end = false; - int ip; -- int shader_end_ip = 0; - int last_branch = -2; - - for (ip = 0; ip < validation_state->max_ip; ip++) { -@@ -621,8 +619,13 @@ vc4_validate_branches(struct vc4_shader_ - uint32_t branch_target_ip; - - if (sig == QPU_SIG_PROG_END) { -- shader_end_ip = ip; -- found_shader_end = true; -+ /* There are two delay slots after program end is -+ * signaled that are still executed, then we're -+ * finished. validation_state->max_ip is the -+ * instruction after the last valid instruction in the -+ * program. -+ */ -+ validation_state->max_ip = ip + 3; - continue; - } - -@@ -676,15 +679,9 @@ vc4_validate_branches(struct vc4_shader_ - } - set_bit(after_delay_ip, validation_state->branch_targets); - max_branch_target = max(max_branch_target, after_delay_ip); -- -- /* There are two delay slots after program end is signaled -- * that are still executed, then we're finished. -- */ -- if (found_shader_end && ip == shader_end_ip + 2) -- break; - } - -- if (max_branch_target > shader_end_ip) { -+ if (max_branch_target > validation_state->max_ip - 3) { - DRM_ERROR("Branch landed after QPU_SIG_PROG_END"); - return false; - } diff --git a/target/linux/brcm2708/patches-4.9/0163-drm-vc4-Add-support-for-rendering-with-ETC1-textures.patch b/target/linux/brcm2708/patches-4.9/0163-drm-vc4-Add-support-for-rendering-with-ETC1-textures.patch deleted file mode 100644 index 2b815787689f..000000000000 --- a/target/linux/brcm2708/patches-4.9/0163-drm-vc4-Add-support-for-rendering-with-ETC1-textures.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 4b1b99ebbada744ef72af56b022492609feb9bba Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 3 Nov 2016 18:53:10 -0700 -Subject: [PATCH] drm/vc4: Add support for rendering with ETC1 textures. - -The validation for it ends up being quite simple, but I hadn't got -around to it before merging the driver. For backwards compatibility, -we also need to add a flag so that the userspace GL driver can easily -tell if the kernel will allow ETC1 textures (on an old kernel, it will -continue to convert to RGBA8) - -Signed-off-by: Eric Anholt -(cherry picked from commit 7154d76fedf549607afbc0d13db9aaf02da5cebf) ---- - drivers/gpu/drm/vc4/vc4_drv.c | 1 + - drivers/gpu/drm/vc4/vc4_validate.c | 7 +++++++ - include/uapi/drm/vc4_drm.h | 1 + - 3 files changed, 9 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_drv.c -+++ b/drivers/gpu/drm/vc4/vc4_drv.c -@@ -78,6 +78,7 @@ static int vc4_get_param_ioctl(struct dr - pm_runtime_put(&vc4->v3d->pdev->dev); - break; - case DRM_VC4_PARAM_SUPPORTS_BRANCHES: -+ case DRM_VC4_PARAM_SUPPORTS_ETC1: - args->value = true; - break; - default: ---- a/drivers/gpu/drm/vc4/vc4_validate.c -+++ b/drivers/gpu/drm/vc4/vc4_validate.c -@@ -644,6 +644,13 @@ reloc_tex(struct vc4_exec_info *exec, - cpp = 1; - break; - case VC4_TEXTURE_TYPE_ETC1: -+ /* ETC1 is arranged as 64-bit blocks, where each block is 4x4 -+ * pixels. -+ */ -+ cpp = 8; -+ width = (width + 3) >> 2; -+ height = (height + 3) >> 2; -+ break; - case VC4_TEXTURE_TYPE_BW1: - case VC4_TEXTURE_TYPE_A4: - case VC4_TEXTURE_TYPE_A1: ---- a/include/uapi/drm/vc4_drm.h -+++ b/include/uapi/drm/vc4_drm.h -@@ -286,6 +286,7 @@ struct drm_vc4_get_hang_state { - #define DRM_VC4_PARAM_V3D_IDENT1 1 - #define DRM_VC4_PARAM_V3D_IDENT2 2 - #define DRM_VC4_PARAM_SUPPORTS_BRANCHES 3 -+#define DRM_VC4_PARAM_SUPPORTS_ETC1 4 - - struct drm_vc4_get_param { - __u32 param; diff --git a/target/linux/brcm2708/patches-4.9/0164-drm-vc4-Use-runtime-autosuspend-to-avoid-thrashing-V.patch b/target/linux/brcm2708/patches-4.9/0164-drm-vc4-Use-runtime-autosuspend-to-avoid-thrashing-V.patch deleted file mode 100644 index f6d738d94112..000000000000 --- a/target/linux/brcm2708/patches-4.9/0164-drm-vc4-Use-runtime-autosuspend-to-avoid-thrashing-V.patch +++ /dev/null @@ -1,78 +0,0 @@ -From 936dc8b00ccd5072c5d610b97199402275bfdf26 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Fri, 4 Nov 2016 15:58:38 -0700 -Subject: [PATCH] drm/vc4: Use runtime autosuspend to avoid thrashing V3D power - state. - -The pm_runtime_put() we were using immediately released power on the -device, which meant that we were generally turning the device off and -on once per frame. In many profiles I've looked at, that added up to -about 1% of CPU time, but this could get worse in the case of frequent -rendering and readback (as may happen in X rendering). By keeping the -device on until we've been idle for a couple of frames, we drop the -overhead of runtime PM down to sub-.1%. - -Signed-off-by: Eric Anholt -(cherry picked from commit 3a62234680d86efa0239665ed8a0e908f1aef147) ---- - drivers/gpu/drm/vc4/vc4_drv.c | 9 ++++++--- - drivers/gpu/drm/vc4/vc4_gem.c | 6 ++++-- - drivers/gpu/drm/vc4/vc4_v3d.c | 2 ++ - 3 files changed, 12 insertions(+), 5 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_drv.c -+++ b/drivers/gpu/drm/vc4/vc4_drv.c -@@ -61,21 +61,24 @@ static int vc4_get_param_ioctl(struct dr - if (ret < 0) - return ret; - args->value = V3D_READ(V3D_IDENT0); -- pm_runtime_put(&vc4->v3d->pdev->dev); -+ pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev); -+ pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev); - break; - case DRM_VC4_PARAM_V3D_IDENT1: - ret = pm_runtime_get_sync(&vc4->v3d->pdev->dev); - if (ret < 0) - return ret; - args->value = V3D_READ(V3D_IDENT1); -- pm_runtime_put(&vc4->v3d->pdev->dev); -+ pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev); -+ pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev); - break; - case DRM_VC4_PARAM_V3D_IDENT2: - ret = pm_runtime_get_sync(&vc4->v3d->pdev->dev); - if (ret < 0) - return ret; - args->value = V3D_READ(V3D_IDENT2); -- pm_runtime_put(&vc4->v3d->pdev->dev); -+ pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev); -+ pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev); - break; - case DRM_VC4_PARAM_SUPPORTS_BRANCHES: - case DRM_VC4_PARAM_SUPPORTS_ETC1: ---- a/drivers/gpu/drm/vc4/vc4_gem.c -+++ b/drivers/gpu/drm/vc4/vc4_gem.c -@@ -711,8 +711,10 @@ vc4_complete_exec(struct drm_device *dev - } - - mutex_lock(&vc4->power_lock); -- if (--vc4->power_refcount == 0) -- pm_runtime_put(&vc4->v3d->pdev->dev); -+ if (--vc4->power_refcount == 0) { -+ pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev); -+ pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev); -+ } - mutex_unlock(&vc4->power_lock); - - kfree(exec); ---- a/drivers/gpu/drm/vc4/vc4_v3d.c -+++ b/drivers/gpu/drm/vc4/vc4_v3d.c -@@ -222,6 +222,8 @@ static int vc4_v3d_bind(struct device *d - return ret; - } - -+ pm_runtime_use_autosuspend(dev); -+ pm_runtime_set_autosuspend_delay(dev, 40); /* a little over 2 frames. */ - pm_runtime_enable(dev); - - return 0; diff --git a/target/linux/brcm2708/patches-4.9/0165-drm-vc4-Add-fragment-shader-threading-support.patch b/target/linux/brcm2708/patches-4.9/0165-drm-vc4-Add-fragment-shader-threading-support.patch deleted file mode 100644 index ea0f4f117745..000000000000 --- a/target/linux/brcm2708/patches-4.9/0165-drm-vc4-Add-fragment-shader-threading-support.patch +++ /dev/null @@ -1,228 +0,0 @@ -From 8f5722ac3e42a33345bfd82b7ad6a153134a4239 Mon Sep 17 00:00:00 2001 -From: Jonas Pfeil -Date: Tue, 8 Nov 2016 00:18:39 +0100 -Subject: [PATCH] drm/vc4: Add fragment shader threading support - -FS threading brings performance improvements of 0-20% in glmark2. - -The validation code checks for thread switch signals and ensures that -the registers of the other thread are not touched, and that our clamps -are not live across thread switches. It also checks that the -threading and branching instructions do not interfere. - -(Original patch by Jonas, changes by anholt for style cleanup, -removing validation the kernel doesn't need to do, and adding the flag -for userspace). - -v2: Minor style fixes from checkpatch. - -Signed-off-by: Jonas Pfeil -Signed-off-by: Eric Anholt -(cherry picked from commit c778cc5df944291dcdb1ca7a6bb781fbc22550c5) ---- - drivers/gpu/drm/vc4/vc4_drv.c | 1 + - drivers/gpu/drm/vc4/vc4_drv.h | 2 + - drivers/gpu/drm/vc4/vc4_validate.c | 17 +++++--- - drivers/gpu/drm/vc4/vc4_validate_shaders.c | 63 ++++++++++++++++++++++++++++++ - include/uapi/drm/vc4_drm.h | 1 + - 5 files changed, 79 insertions(+), 5 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_drv.c -+++ b/drivers/gpu/drm/vc4/vc4_drv.c -@@ -82,6 +82,7 @@ static int vc4_get_param_ioctl(struct dr - break; - case DRM_VC4_PARAM_SUPPORTS_BRANCHES: - case DRM_VC4_PARAM_SUPPORTS_ETC1: -+ case DRM_VC4_PARAM_SUPPORTS_THREADED_FS: - args->value = true; - break; - default: ---- a/drivers/gpu/drm/vc4/vc4_drv.h -+++ b/drivers/gpu/drm/vc4/vc4_drv.h -@@ -384,6 +384,8 @@ struct vc4_validated_shader_info { - - uint32_t num_uniform_addr_offsets; - uint32_t *uniform_addr_offsets; -+ -+ bool is_threaded; - }; - - /** ---- a/drivers/gpu/drm/vc4/vc4_validate.c -+++ b/drivers/gpu/drm/vc4/vc4_validate.c -@@ -789,11 +789,6 @@ validate_gl_shader_rec(struct drm_device - exec->shader_rec_v += roundup(packet_size, 16); - exec->shader_rec_size -= packet_size; - -- if (!(*(uint16_t *)pkt_u & VC4_SHADER_FLAG_FS_SINGLE_THREAD)) { -- DRM_ERROR("Multi-threaded fragment shaders not supported.\n"); -- return -EINVAL; -- } -- - for (i = 0; i < shader_reloc_count; i++) { - if (src_handles[i] > exec->bo_count) { - DRM_ERROR("Shader handle %d too big\n", src_handles[i]); -@@ -810,6 +805,18 @@ validate_gl_shader_rec(struct drm_device - return -EINVAL; - } - -+ if (((*(uint16_t *)pkt_u & VC4_SHADER_FLAG_FS_SINGLE_THREAD) == 0) != -+ to_vc4_bo(&bo[0]->base)->validated_shader->is_threaded) { -+ DRM_ERROR("Thread mode of CL and FS do not match\n"); -+ return -EINVAL; -+ } -+ -+ if (to_vc4_bo(&bo[1]->base)->validated_shader->is_threaded || -+ to_vc4_bo(&bo[2]->base)->validated_shader->is_threaded) { -+ DRM_ERROR("cs and vs cannot be threaded\n"); -+ return -EINVAL; -+ } -+ - for (i = 0; i < shader_reloc_count; i++) { - struct vc4_validated_shader_info *validated_shader; - uint32_t o = shader_reloc_offsets[i]; ---- a/drivers/gpu/drm/vc4/vc4_validate_shaders.c -+++ b/drivers/gpu/drm/vc4/vc4_validate_shaders.c -@@ -83,6 +83,13 @@ struct vc4_shader_validation_state { - * basic blocks. - */ - bool needs_uniform_address_for_loop; -+ -+ /* Set when we find an instruction writing the top half of the -+ * register files. If we allowed writing the unusable regs in -+ * a threaded shader, then the other shader running on our -+ * QPU's clamp validation would be invalid. -+ */ -+ bool all_registers_used; - }; - - static uint32_t -@@ -119,6 +126,13 @@ raddr_add_a_to_live_reg_index(uint64_t i - } - - static bool -+live_reg_is_upper_half(uint32_t lri) -+{ -+ return (lri >= 16 && lri < 32) || -+ (lri >= 32 + 16 && lri < 32 + 32); -+} -+ -+static bool - is_tmu_submit(uint32_t waddr) - { - return (waddr == QPU_W_TMU0_S || -@@ -390,6 +404,9 @@ check_reg_write(struct vc4_validated_sha - } else { - validation_state->live_immediates[lri] = ~0; - } -+ -+ if (live_reg_is_upper_half(lri)) -+ validation_state->all_registers_used = true; - } - - switch (waddr) { -@@ -598,6 +615,11 @@ check_instruction_reads(struct vc4_valid - } - } - -+ if ((raddr_a >= 16 && raddr_a < 32) || -+ (raddr_b >= 16 && raddr_b < 32 && sig != QPU_SIG_SMALL_IMM)) { -+ validation_state->all_registers_used = true; -+ } -+ - return true; - } - -@@ -753,6 +775,7 @@ vc4_validate_shader(struct drm_gem_cma_o - { - bool found_shader_end = false; - int shader_end_ip = 0; -+ uint32_t last_thread_switch_ip = -3; - uint32_t ip; - struct vc4_validated_shader_info *validated_shader = NULL; - struct vc4_shader_validation_state validation_state; -@@ -785,6 +808,17 @@ vc4_validate_shader(struct drm_gem_cma_o - if (!vc4_handle_branch_target(&validation_state)) - goto fail; - -+ if (ip == last_thread_switch_ip + 3) { -+ /* Reset r0-r3 live clamp data */ -+ int i; -+ -+ for (i = 64; i < LIVE_REG_COUNT; i++) { -+ validation_state.live_min_clamp_offsets[i] = ~0; -+ validation_state.live_max_clamp_regs[i] = false; -+ validation_state.live_immediates[i] = ~0; -+ } -+ } -+ - switch (sig) { - case QPU_SIG_NONE: - case QPU_SIG_WAIT_FOR_SCOREBOARD: -@@ -794,6 +828,8 @@ vc4_validate_shader(struct drm_gem_cma_o - case QPU_SIG_LOAD_TMU1: - case QPU_SIG_PROG_END: - case QPU_SIG_SMALL_IMM: -+ case QPU_SIG_THREAD_SWITCH: -+ case QPU_SIG_LAST_THREAD_SWITCH: - if (!check_instruction_writes(validated_shader, - &validation_state)) { - DRM_ERROR("Bad write at ip %d\n", ip); -@@ -809,6 +845,18 @@ vc4_validate_shader(struct drm_gem_cma_o - shader_end_ip = ip; - } - -+ if (sig == QPU_SIG_THREAD_SWITCH || -+ sig == QPU_SIG_LAST_THREAD_SWITCH) { -+ validated_shader->is_threaded = true; -+ -+ if (ip < last_thread_switch_ip + 3) { -+ DRM_ERROR("Thread switch too soon after " -+ "last switch at ip %d\n", ip); -+ goto fail; -+ } -+ last_thread_switch_ip = ip; -+ } -+ - break; - - case QPU_SIG_LOAD_IMM: -@@ -823,6 +871,13 @@ vc4_validate_shader(struct drm_gem_cma_o - if (!check_branch(inst, validated_shader, - &validation_state, ip)) - goto fail; -+ -+ if (ip < last_thread_switch_ip + 3) { -+ DRM_ERROR("Branch in thread switch at ip %d", -+ ip); -+ goto fail; -+ } -+ - break; - default: - DRM_ERROR("Unsupported QPU signal %d at " -@@ -844,6 +899,14 @@ vc4_validate_shader(struct drm_gem_cma_o - goto fail; - } - -+ /* Might corrupt other thread */ -+ if (validated_shader->is_threaded && -+ validation_state.all_registers_used) { -+ DRM_ERROR("Shader uses threading, but uses the upper " -+ "half of the registers, too\n"); -+ goto fail; -+ } -+ - /* If we did a backwards branch and we haven't emitted a uniforms - * reset since then, we still need the uniforms stream to have the - * uniforms address available so that the backwards branch can do its ---- a/include/uapi/drm/vc4_drm.h -+++ b/include/uapi/drm/vc4_drm.h -@@ -287,6 +287,7 @@ struct drm_vc4_get_hang_state { - #define DRM_VC4_PARAM_V3D_IDENT2 2 - #define DRM_VC4_PARAM_SUPPORTS_BRANCHES 3 - #define DRM_VC4_PARAM_SUPPORTS_ETC1 4 -+#define DRM_VC4_PARAM_SUPPORTS_THREADED_FS 5 - - struct drm_vc4_get_param { - __u32 param; diff --git a/target/linux/brcm2708/patches-4.9/0166-drm-vc4-Fix-race-between-page-flip-completion-event-.patch b/target/linux/brcm2708/patches-4.9/0166-drm-vc4-Fix-race-between-page-flip-completion-event-.patch deleted file mode 100644 index 3c66fefafda1..000000000000 --- a/target/linux/brcm2708/patches-4.9/0166-drm-vc4-Fix-race-between-page-flip-completion-event-.patch +++ /dev/null @@ -1,93 +0,0 @@ -From d7f32f81cf7579ac7d13127db88e789ea864824c Mon Sep 17 00:00:00 2001 -From: Derek Foreman -Date: Thu, 24 Nov 2016 12:11:55 -0600 -Subject: [PATCH] drm/vc4: Fix race between page flip completion event and - clean-up - -There was a small window where a userspace program could submit -a pageflip after receiving a pageflip completion event yet still -receive EBUSY. - -Signed-off-by: Derek Foreman -Signed-off-by: Eric Anholt -Reviewed-by: Eric Anholt -Reviewed-by: Daniel Stone -(cherry picked from commit 26fc78f6fef39b9d7a15def5e7e9826ff68303f4) ---- - drivers/gpu/drm/vc4/vc4_crtc.c | 8 ++++++++ - drivers/gpu/drm/vc4/vc4_drv.h | 1 + - drivers/gpu/drm/vc4/vc4_kms.c | 33 +++++++++++++++++++++++++-------- - 3 files changed, 34 insertions(+), 8 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_crtc.c -+++ b/drivers/gpu/drm/vc4/vc4_crtc.c -@@ -682,6 +682,14 @@ void vc4_disable_vblank(struct drm_devic - CRTC_WRITE(PV_INTEN, 0); - } - -+/* Must be called with the event lock held */ -+bool vc4_event_pending(struct drm_crtc *crtc) -+{ -+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -+ -+ return !!vc4_crtc->event; -+} -+ - static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) - { - struct drm_crtc *crtc = &vc4_crtc->base; ---- a/drivers/gpu/drm/vc4/vc4_drv.h -+++ b/drivers/gpu/drm/vc4/vc4_drv.h -@@ -445,6 +445,7 @@ int vc4_bo_stats_debugfs(struct seq_file - extern struct platform_driver vc4_crtc_driver; - int vc4_enable_vblank(struct drm_device *dev, unsigned int crtc_id); - void vc4_disable_vblank(struct drm_device *dev, unsigned int crtc_id); -+bool vc4_event_pending(struct drm_crtc *crtc); - int vc4_crtc_debugfs_regs(struct seq_file *m, void *arg); - int vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id, - unsigned int flags, int *vpos, int *hpos, ---- a/drivers/gpu/drm/vc4/vc4_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_kms.c -@@ -119,17 +119,34 @@ static int vc4_atomic_commit(struct drm_ - - /* Make sure that any outstanding modesets have finished. */ - if (nonblock) { -- ret = down_trylock(&vc4->async_modeset); -- if (ret) { -+ struct drm_crtc *crtc; -+ struct drm_crtc_state *crtc_state; -+ unsigned long flags; -+ bool busy = false; -+ -+ /* -+ * If there's an undispatched event to send then we're -+ * obviously still busy. If there isn't, then we can -+ * unconditionally wait for the semaphore because it -+ * shouldn't be contended (for long). -+ * -+ * This is to prevent a race where queuing a new flip -+ * from userspace immediately on receipt of an event -+ * beats our clean-up and returns EBUSY. -+ */ -+ spin_lock_irqsave(&dev->event_lock, flags); -+ for_each_crtc_in_state(state, crtc, crtc_state, i) -+ busy |= vc4_event_pending(crtc); -+ spin_unlock_irqrestore(&dev->event_lock, flags); -+ if (busy) { - kfree(c); - return -EBUSY; - } -- } else { -- ret = down_interruptible(&vc4->async_modeset); -- if (ret) { -- kfree(c); -- return ret; -- } -+ } -+ ret = down_interruptible(&vc4->async_modeset); -+ if (ret) { -+ kfree(c); -+ return ret; - } - - ret = drm_atomic_helper_prepare_planes(dev, state); diff --git a/target/linux/brcm2708/patches-4.9/0167-drm-vc4-Fix-clock_select-setting-for-the-VEC-encoder.patch b/target/linux/brcm2708/patches-4.9/0167-drm-vc4-Fix-clock_select-setting-for-the-VEC-encoder.patch deleted file mode 100644 index c2499c130ad5..000000000000 --- a/target/linux/brcm2708/patches-4.9/0167-drm-vc4-Fix-clock_select-setting-for-the-VEC-encoder.patch +++ /dev/null @@ -1,113 +0,0 @@ -From 3b162fdf85d89829d58bbee2d7d79987aceaa595 Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Fri, 2 Dec 2016 14:48:07 +0100 -Subject: [PATCH] drm/vc4: Fix ->clock_select setting for the VEC encoder - -PV_CONTROL_CLK_SELECT_VEC is actually 2 and not 0. Fix the definition and -rework the vc4_set_crtc_possible_masks() to cover the full range of the -PV_CONTROL_CLK_SELECT field. - -Signed-off-by: Boris Brezillon -Signed-off-by: Eric Anholt -(cherry picked from commit ab8df60e3a3b68420d0d4477c5f07c00fbfb078b) ---- - drivers/gpu/drm/vc4/vc4_crtc.c | 38 +++++++++++++++++++++++--------------- - drivers/gpu/drm/vc4/vc4_drv.h | 1 + - drivers/gpu/drm/vc4/vc4_regs.h | 3 ++- - 3 files changed, 26 insertions(+), 16 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_crtc.c -+++ b/drivers/gpu/drm/vc4/vc4_crtc.c -@@ -83,8 +83,7 @@ struct vc4_crtc_data { - /* Which channel of the HVS this pixelvalve sources from. */ - int hvs_channel; - -- enum vc4_encoder_type encoder0_type; -- enum vc4_encoder_type encoder1_type; -+ enum vc4_encoder_type encoder_types[4]; - }; - - #define CRTC_WRITE(offset, val) writel(val, vc4_crtc->regs + (offset)) -@@ -880,20 +879,26 @@ static const struct drm_crtc_helper_func - - static const struct vc4_crtc_data pv0_data = { - .hvs_channel = 0, -- .encoder0_type = VC4_ENCODER_TYPE_DSI0, -- .encoder1_type = VC4_ENCODER_TYPE_DPI, -+ .encoder_types = { -+ [PV_CONTROL_CLK_SELECT_DSI] = VC4_ENCODER_TYPE_DSI0, -+ [PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI] = VC4_ENCODER_TYPE_DPI, -+ }, - }; - - static const struct vc4_crtc_data pv1_data = { - .hvs_channel = 2, -- .encoder0_type = VC4_ENCODER_TYPE_DSI1, -- .encoder1_type = VC4_ENCODER_TYPE_SMI, -+ .encoder_types = { -+ [PV_CONTROL_CLK_SELECT_DSI] = VC4_ENCODER_TYPE_DSI1, -+ [PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI] = VC4_ENCODER_TYPE_SMI, -+ }, - }; - - static const struct vc4_crtc_data pv2_data = { - .hvs_channel = 1, -- .encoder0_type = VC4_ENCODER_TYPE_VEC, -- .encoder1_type = VC4_ENCODER_TYPE_HDMI, -+ .encoder_types = { -+ [PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI] = VC4_ENCODER_TYPE_HDMI, -+ [PV_CONTROL_CLK_SELECT_VEC] = VC4_ENCODER_TYPE_VEC, -+ }, - }; - - static const struct of_device_id vc4_crtc_dt_match[] = { -@@ -907,17 +912,20 @@ static void vc4_set_crtc_possible_masks( - struct drm_crtc *crtc) - { - struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -+ const struct vc4_crtc_data *crtc_data = vc4_crtc->data; -+ const enum vc4_encoder_type *encoder_types = crtc_data->encoder_types; - struct drm_encoder *encoder; - - drm_for_each_encoder(encoder, drm) { - struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder); -+ int i; - -- if (vc4_encoder->type == vc4_crtc->data->encoder0_type) { -- vc4_encoder->clock_select = 0; -- encoder->possible_crtcs |= drm_crtc_mask(crtc); -- } else if (vc4_encoder->type == vc4_crtc->data->encoder1_type) { -- vc4_encoder->clock_select = 1; -- encoder->possible_crtcs |= drm_crtc_mask(crtc); -+ for (i = 0; i < ARRAY_SIZE(crtc_data->encoder_types); i++) { -+ if (vc4_encoder->type == encoder_types[i]) { -+ vc4_encoder->clock_select = i; -+ encoder->possible_crtcs |= drm_crtc_mask(crtc); -+ break; -+ } - } - } - } ---- a/drivers/gpu/drm/vc4/vc4_drv.h -+++ b/drivers/gpu/drm/vc4/vc4_drv.h -@@ -197,6 +197,7 @@ to_vc4_plane(struct drm_plane *plane) - } - - enum vc4_encoder_type { -+ VC4_ENCODER_TYPE_NONE, - VC4_ENCODER_TYPE_HDMI, - VC4_ENCODER_TYPE_VEC, - VC4_ENCODER_TYPE_DSI0, ---- a/drivers/gpu/drm/vc4/vc4_regs.h -+++ b/drivers/gpu/drm/vc4/vc4_regs.h -@@ -177,8 +177,9 @@ - # define PV_CONTROL_WAIT_HSTART BIT(12) - # define PV_CONTROL_PIXEL_REP_MASK VC4_MASK(5, 4) - # define PV_CONTROL_PIXEL_REP_SHIFT 4 --# define PV_CONTROL_CLK_SELECT_DSI_VEC 0 -+# define PV_CONTROL_CLK_SELECT_DSI 0 - # define PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI 1 -+# define PV_CONTROL_CLK_SELECT_VEC 2 - # define PV_CONTROL_CLK_SELECT_MASK VC4_MASK(3, 2) - # define PV_CONTROL_CLK_SELECT_SHIFT 2 - # define PV_CONTROL_FIFO_CLR BIT(1) diff --git a/target/linux/brcm2708/patches-4.9/0168-drm-Add-TV-connector-states-to-drm_connector_state.patch b/target/linux/brcm2708/patches-4.9/0168-drm-Add-TV-connector-states-to-drm_connector_state.patch deleted file mode 100644 index 39e6f1166564..000000000000 --- a/target/linux/brcm2708/patches-4.9/0168-drm-Add-TV-connector-states-to-drm_connector_state.patch +++ /dev/null @@ -1,148 +0,0 @@ -From 01ff94b770786a793c08fc7fcbecdd5f859a8958 Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Fri, 2 Dec 2016 14:48:09 +0100 -Subject: [PATCH] drm: Add TV connector states to drm_connector_state - -Some generic TV connector properties are exposed in drm_mode_config, but -they are currently handled independently in each DRM encoder driver. - -Extend the drm_connector_state to store TV related states, and modify the -drm_atomic_connector_{set,get}_property() helpers to fill the connector -state accordingly. - -Each driver is then responsible for checking and applying the new config -in its ->atomic_mode_{check,set}() operations. - -Signed-off-by: Boris Brezillon -Reviewed-by: Daniel Vetter -Signed-off-by: Eric Anholt -(cherry picked from commit 299a16b163c95fbe1e3b1e142ba9c6ce9dab2c23) ---- - drivers/gpu/drm/drm_atomic.c | 50 ++++++++++++++++++++++++++++++++++++++++++++ - include/drm/drm_connector.h | 32 ++++++++++++++++++++++++++++ - 2 files changed, 82 insertions(+) - ---- a/drivers/gpu/drm/drm_atomic.c -+++ b/drivers/gpu/drm/drm_atomic.c -@@ -989,12 +989,38 @@ int drm_atomic_connector_set_property(st - * now?) atomic writes to DPMS property: - */ - return -EINVAL; -+ } else if (property == config->tv_select_subconnector_property) { -+ state->tv.subconnector = val; -+ } else if (property == config->tv_left_margin_property) { -+ state->tv.margins.left = val; -+ } else if (property == config->tv_right_margin_property) { -+ state->tv.margins.right = val; -+ } else if (property == config->tv_top_margin_property) { -+ state->tv.margins.top = val; -+ } else if (property == config->tv_bottom_margin_property) { -+ state->tv.margins.bottom = val; -+ } else if (property == config->tv_mode_property) { -+ state->tv.mode = val; -+ } else if (property == config->tv_brightness_property) { -+ state->tv.brightness = val; -+ } else if (property == config->tv_contrast_property) { -+ state->tv.contrast = val; -+ } else if (property == config->tv_flicker_reduction_property) { -+ state->tv.flicker_reduction = val; -+ } else if (property == config->tv_overscan_property) { -+ state->tv.overscan = val; -+ } else if (property == config->tv_saturation_property) { -+ state->tv.saturation = val; -+ } else if (property == config->tv_hue_property) { -+ state->tv.hue = val; - } else if (connector->funcs->atomic_set_property) { - return connector->funcs->atomic_set_property(connector, - state, property, val); - } else { - return -EINVAL; - } -+ -+ return 0; - } - EXPORT_SYMBOL(drm_atomic_connector_set_property); - -@@ -1025,6 +1051,30 @@ drm_atomic_connector_get_property(struct - *val = (state->crtc) ? state->crtc->base.id : 0; - } else if (property == config->dpms_property) { - *val = connector->dpms; -+ } else if (property == config->tv_select_subconnector_property) { -+ *val = state->tv.subconnector; -+ } else if (property == config->tv_left_margin_property) { -+ *val = state->tv.margins.left; -+ } else if (property == config->tv_right_margin_property) { -+ *val = state->tv.margins.right; -+ } else if (property == config->tv_top_margin_property) { -+ *val = state->tv.margins.top; -+ } else if (property == config->tv_bottom_margin_property) { -+ *val = state->tv.margins.bottom; -+ } else if (property == config->tv_mode_property) { -+ *val = state->tv.mode; -+ } else if (property == config->tv_brightness_property) { -+ *val = state->tv.brightness; -+ } else if (property == config->tv_contrast_property) { -+ *val = state->tv.contrast; -+ } else if (property == config->tv_flicker_reduction_property) { -+ *val = state->tv.flicker_reduction; -+ } else if (property == config->tv_overscan_property) { -+ *val = state->tv.overscan; -+ } else if (property == config->tv_saturation_property) { -+ *val = state->tv.saturation; -+ } else if (property == config->tv_hue_property) { -+ *val = state->tv.hue; - } else if (connector->funcs->atomic_get_property) { - return connector->funcs->atomic_get_property(connector, - state, property, val); ---- a/include/drm/drm_connector.h -+++ b/include/drm/drm_connector.h -@@ -194,10 +194,40 @@ int drm_display_info_set_bus_formats(str - unsigned int num_formats); - - /** -+ * struct drm_tv_connector_state - TV connector related states -+ * @subconnector: selected subconnector -+ * @margins: left/right/top/bottom margins -+ * @mode: TV mode -+ * @brightness: brightness in percent -+ * @contrast: contrast in percent -+ * @flicker_reduction: flicker reduction in percent -+ * @overscan: overscan in percent -+ * @saturation: saturation in percent -+ * @hue: hue in percent -+ */ -+struct drm_tv_connector_state { -+ enum drm_mode_subconnector subconnector; -+ struct { -+ unsigned int left; -+ unsigned int right; -+ unsigned int top; -+ unsigned int bottom; -+ } margins; -+ unsigned int mode; -+ unsigned int brightness; -+ unsigned int contrast; -+ unsigned int flicker_reduction; -+ unsigned int overscan; -+ unsigned int saturation; -+ unsigned int hue; -+}; -+ -+/** - * struct drm_connector_state - mutable connector state - * @connector: backpointer to the connector - * @best_encoder: can be used by helpers and drivers to select the encoder - * @state: backpointer to global drm_atomic_state -+ * @tv: TV connector state - */ - struct drm_connector_state { - struct drm_connector *connector; -@@ -213,6 +243,8 @@ struct drm_connector_state { - struct drm_encoder *best_encoder; - - struct drm_atomic_state *state; -+ -+ struct drm_tv_connector_state tv; - }; - - /** diff --git a/target/linux/brcm2708/patches-4.9/0169-drm-Turn-DRM_MODE_SUBCONNECTOR_xx-definitions-into-a.patch b/target/linux/brcm2708/patches-4.9/0169-drm-Turn-DRM_MODE_SUBCONNECTOR_xx-definitions-into-a.patch deleted file mode 100644 index db82c0c5ac6b..000000000000 --- a/target/linux/brcm2708/patches-4.9/0169-drm-Turn-DRM_MODE_SUBCONNECTOR_xx-definitions-into-a.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 1c18e33ab3ff21703925a427e5f55075427a598c Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Fri, 2 Dec 2016 14:48:08 +0100 -Subject: [PATCH] drm: Turn DRM_MODE_SUBCONNECTOR_xx definitions into an enum - -List of values like the DRM_MODE_SUBCONNECTOR_xx ones are better -represented with enums. - -Turn the DRM_MODE_SUBCONNECTOR_xx macros into an enum. - -Signed-off-by: Boris Brezillon -Suggested-by: Daniel Vetter -Reviewed-by: Daniel Vetter -Signed-off-by: Eric Anholt -(cherry picked from commit dee7a4fee730ca8908f335b6b66174cba4598ecd) ---- - include/uapi/drm/drm_mode.h | 18 ++++++++++-------- - 1 file changed, 10 insertions(+), 8 deletions(-) - ---- a/include/uapi/drm/drm_mode.h -+++ b/include/uapi/drm/drm_mode.h -@@ -220,14 +220,16 @@ struct drm_mode_get_encoder { - - /* This is for connectors with multiple signal types. */ - /* Try to match DRM_MODE_CONNECTOR_X as closely as possible. */ --#define DRM_MODE_SUBCONNECTOR_Automatic 0 --#define DRM_MODE_SUBCONNECTOR_Unknown 0 --#define DRM_MODE_SUBCONNECTOR_DVID 3 --#define DRM_MODE_SUBCONNECTOR_DVIA 4 --#define DRM_MODE_SUBCONNECTOR_Composite 5 --#define DRM_MODE_SUBCONNECTOR_SVIDEO 6 --#define DRM_MODE_SUBCONNECTOR_Component 8 --#define DRM_MODE_SUBCONNECTOR_SCART 9 -+enum drm_mode_subconnector { -+ DRM_MODE_SUBCONNECTOR_Automatic = 0, -+ DRM_MODE_SUBCONNECTOR_Unknown = 0, -+ DRM_MODE_SUBCONNECTOR_DVID = 3, -+ DRM_MODE_SUBCONNECTOR_DVIA = 4, -+ DRM_MODE_SUBCONNECTOR_Composite = 5, -+ DRM_MODE_SUBCONNECTOR_SVIDEO = 6, -+ DRM_MODE_SUBCONNECTOR_Component = 8, -+ DRM_MODE_SUBCONNECTOR_SCART = 9, -+}; - - #define DRM_MODE_CONNECTOR_Unknown 0 - #define DRM_MODE_CONNECTOR_VGA 1 diff --git a/target/linux/brcm2708/patches-4.9/0170-drm-vc4-Add-support-for-the-VEC-Video-Encoder-IP.patch b/target/linux/brcm2708/patches-4.9/0170-drm-vc4-Add-support-for-the-VEC-Video-Encoder-IP.patch deleted file mode 100644 index 0b5a85385629..000000000000 --- a/target/linux/brcm2708/patches-4.9/0170-drm-vc4-Add-support-for-the-VEC-Video-Encoder-IP.patch +++ /dev/null @@ -1,730 +0,0 @@ -From d79cd118969fb3ad714feb834eefdddcc4348673 Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Fri, 2 Dec 2016 14:48:10 +0100 -Subject: [PATCH] drm/vc4: Add support for the VEC (Video Encoder) IP - -The VEC IP is a TV DAC, providing support for PAL and NTSC standards. - -Signed-off-by: Boris Brezillon -Signed-off-by: Eric Anholt -(cherry picked from commit e4b81f8c74c82dbc0cb0e5ceb5ef9b713b325fc9) ---- - drivers/gpu/drm/vc4/Makefile | 1 + - drivers/gpu/drm/vc4/vc4_debugfs.c | 1 + - drivers/gpu/drm/vc4/vc4_drv.c | 1 + - drivers/gpu/drm/vc4/vc4_drv.h | 5 + - drivers/gpu/drm/vc4/vc4_vec.c | 657 ++++++++++++++++++++++++++++++++++++++ - 5 files changed, 665 insertions(+) - create mode 100644 drivers/gpu/drm/vc4/vc4_vec.c - ---- a/drivers/gpu/drm/vc4/Makefile -+++ b/drivers/gpu/drm/vc4/Makefile -@@ -12,6 +12,7 @@ vc4-y := \ - vc4_kms.o \ - vc4_gem.o \ - vc4_hdmi.o \ -+ vc4_vec.o \ - vc4_hvs.o \ - vc4_irq.o \ - vc4_plane.o \ ---- a/drivers/gpu/drm/vc4/vc4_debugfs.c -+++ b/drivers/gpu/drm/vc4/vc4_debugfs.c -@@ -19,6 +19,7 @@ static const struct drm_info_list vc4_de - {"bo_stats", vc4_bo_stats_debugfs, 0}, - {"dpi_regs", vc4_dpi_debugfs_regs, 0}, - {"hdmi_regs", vc4_hdmi_debugfs_regs, 0}, -+ {"vec_regs", vc4_vec_debugfs_regs, 0}, - {"hvs_regs", vc4_hvs_debugfs_regs, 0}, - {"crtc0_regs", vc4_crtc_debugfs_regs, 0, (void *)(uintptr_t)0}, - {"crtc1_regs", vc4_crtc_debugfs_regs, 0, (void *)(uintptr_t)1}, ---- a/drivers/gpu/drm/vc4/vc4_drv.c -+++ b/drivers/gpu/drm/vc4/vc4_drv.c -@@ -294,6 +294,7 @@ static const struct component_master_ops - - static struct platform_driver *const component_drivers[] = { - &vc4_hdmi_driver, -+ &vc4_vec_driver, - &vc4_dpi_driver, - &vc4_hvs_driver, - &vc4_crtc_driver, ---- a/drivers/gpu/drm/vc4/vc4_drv.h -+++ b/drivers/gpu/drm/vc4/vc4_drv.h -@@ -20,6 +20,7 @@ struct vc4_dev { - struct vc4_crtc *crtc[3]; - struct vc4_v3d *v3d; - struct vc4_dpi *dpi; -+ struct vc4_vec *vec; - - struct drm_fbdev_cma *fbdev; - -@@ -494,6 +495,10 @@ int vc4_queue_seqno_cb(struct drm_device - extern struct platform_driver vc4_hdmi_driver; - int vc4_hdmi_debugfs_regs(struct seq_file *m, void *unused); - -+/* vc4_hdmi.c */ -+extern struct platform_driver vc4_vec_driver; -+int vc4_vec_debugfs_regs(struct seq_file *m, void *unused); -+ - /* vc4_irq.c */ - irqreturn_t vc4_irq(int irq, void *arg); - void vc4_irq_preinstall(struct drm_device *dev); ---- /dev/null -+++ b/drivers/gpu/drm/vc4/vc4_vec.c -@@ -0,0 +1,657 @@ -+/* -+ * Copyright (C) 2016 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+/** -+ * DOC: VC4 SDTV module -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "vc4_drv.h" -+#include "vc4_regs.h" -+ -+/* WSE Registers */ -+#define VEC_WSE_RESET 0xc0 -+ -+#define VEC_WSE_CONTROL 0xc4 -+#define VEC_WSE_WSS_ENABLE BIT(7) -+ -+#define VEC_WSE_WSS_DATA 0xc8 -+#define VEC_WSE_VPS_DATA1 0xcc -+#define VEC_WSE_VPS_CONTROL 0xd0 -+ -+/* VEC Registers */ -+#define VEC_REVID 0x100 -+ -+#define VEC_CONFIG0 0x104 -+#define VEC_CONFIG0_YDEL_MASK GENMASK(28, 26) -+#define VEC_CONFIG0_YDEL(x) ((x) << 26) -+#define VEC_CONFIG0_CDEL_MASK GENMASK(25, 24) -+#define VEC_CONFIG0_CDEL(x) ((x) << 24) -+#define VEC_CONFIG0_PBPR_FIL BIT(18) -+#define VEC_CONFIG0_CHROMA_GAIN_MASK GENMASK(17, 16) -+#define VEC_CONFIG0_CHROMA_GAIN_UNITY (0 << 16) -+#define VEC_CONFIG0_CHROMA_GAIN_1_32 (1 << 16) -+#define VEC_CONFIG0_CHROMA_GAIN_1_16 (2 << 16) -+#define VEC_CONFIG0_CHROMA_GAIN_1_8 (3 << 16) -+#define VEC_CONFIG0_CBURST_GAIN_MASK GENMASK(14, 13) -+#define VEC_CONFIG0_CBURST_GAIN_UNITY (0 << 13) -+#define VEC_CONFIG0_CBURST_GAIN_1_128 (1 << 13) -+#define VEC_CONFIG0_CBURST_GAIN_1_64 (2 << 13) -+#define VEC_CONFIG0_CBURST_GAIN_1_32 (3 << 13) -+#define VEC_CONFIG0_CHRBW1 BIT(11) -+#define VEC_CONFIG0_CHRBW0 BIT(10) -+#define VEC_CONFIG0_SYNCDIS BIT(9) -+#define VEC_CONFIG0_BURDIS BIT(8) -+#define VEC_CONFIG0_CHRDIS BIT(7) -+#define VEC_CONFIG0_PDEN BIT(6) -+#define VEC_CONFIG0_YCDELAY BIT(4) -+#define VEC_CONFIG0_RAMPEN BIT(2) -+#define VEC_CONFIG0_YCDIS BIT(2) -+#define VEC_CONFIG0_STD_MASK GENMASK(1, 0) -+#define VEC_CONFIG0_NTSC_STD 0 -+#define VEC_CONFIG0_PAL_BDGHI_STD 1 -+#define VEC_CONFIG0_PAL_N_STD 3 -+ -+#define VEC_SCHPH 0x108 -+#define VEC_SOFT_RESET 0x10c -+#define VEC_CLMP0_START 0x144 -+#define VEC_CLMP0_END 0x148 -+#define VEC_FREQ3_2 0x180 -+#define VEC_FREQ1_0 0x184 -+ -+#define VEC_CONFIG1 0x188 -+#define VEC_CONFIG_VEC_RESYNC_OFF BIT(18) -+#define VEC_CONFIG_RGB219 BIT(17) -+#define VEC_CONFIG_CBAR_EN BIT(16) -+#define VEC_CONFIG_TC_OBB BIT(15) -+#define VEC_CONFIG1_OUTPUT_MODE_MASK GENMASK(12, 10) -+#define VEC_CONFIG1_C_Y_CVBS (0 << 10) -+#define VEC_CONFIG1_CVBS_Y_C (1 << 10) -+#define VEC_CONFIG1_PR_Y_PB (2 << 10) -+#define VEC_CONFIG1_RGB (4 << 10) -+#define VEC_CONFIG1_Y_C_CVBS (5 << 10) -+#define VEC_CONFIG1_C_CVBS_Y (6 << 10) -+#define VEC_CONFIG1_C_CVBS_CVBS (7 << 10) -+#define VEC_CONFIG1_DIS_CHR BIT(9) -+#define VEC_CONFIG1_DIS_LUMA BIT(8) -+#define VEC_CONFIG1_YCBCR_IN BIT(6) -+#define VEC_CONFIG1_DITHER_TYPE_LFSR 0 -+#define VEC_CONFIG1_DITHER_TYPE_COUNTER BIT(5) -+#define VEC_CONFIG1_DITHER_EN BIT(4) -+#define VEC_CONFIG1_CYDELAY BIT(3) -+#define VEC_CONFIG1_LUMADIS BIT(2) -+#define VEC_CONFIG1_COMPDIS BIT(1) -+#define VEC_CONFIG1_CUSTOM_FREQ BIT(0) -+ -+#define VEC_CONFIG2 0x18c -+#define VEC_CONFIG2_PROG_SCAN BIT(15) -+#define VEC_CONFIG2_SYNC_ADJ_MASK GENMASK(14, 12) -+#define VEC_CONFIG2_SYNC_ADJ(x) (((x) / 2) << 12) -+#define VEC_CONFIG2_PBPR_EN BIT(10) -+#define VEC_CONFIG2_UV_DIG_DIS BIT(6) -+#define VEC_CONFIG2_RGB_DIG_DIS BIT(5) -+#define VEC_CONFIG2_TMUX_MASK GENMASK(3, 2) -+#define VEC_CONFIG2_TMUX_DRIVE0 (0 << 2) -+#define VEC_CONFIG2_TMUX_RG_COMP (1 << 2) -+#define VEC_CONFIG2_TMUX_UV_YC (2 << 2) -+#define VEC_CONFIG2_TMUX_SYNC_YC (3 << 2) -+ -+#define VEC_INTERRUPT_CONTROL 0x190 -+#define VEC_INTERRUPT_STATUS 0x194 -+#define VEC_FCW_SECAM_B 0x198 -+#define VEC_SECAM_GAIN_VAL 0x19c -+ -+#define VEC_CONFIG3 0x1a0 -+#define VEC_CONFIG3_HORIZ_LEN_STD (0 << 0) -+#define VEC_CONFIG3_HORIZ_LEN_MPEG1_SIF (1 << 0) -+#define VEC_CONFIG3_SHAPE_NON_LINEAR BIT(1) -+ -+#define VEC_STATUS0 0x200 -+#define VEC_MASK0 0x204 -+ -+#define VEC_CFG 0x208 -+#define VEC_CFG_SG_MODE_MASK GENMASK(6, 5) -+#define VEC_CFG_SG_MODE(x) ((x) << 5) -+#define VEC_CFG_SG_EN BIT(4) -+#define VEC_CFG_VEC_EN BIT(3) -+#define VEC_CFG_MB_EN BIT(2) -+#define VEC_CFG_ENABLE BIT(1) -+#define VEC_CFG_TB_EN BIT(0) -+ -+#define VEC_DAC_TEST 0x20c -+ -+#define VEC_DAC_CONFIG 0x210 -+#define VEC_DAC_CONFIG_LDO_BIAS_CTRL(x) ((x) << 24) -+#define VEC_DAC_CONFIG_DRIVER_CTRL(x) ((x) << 16) -+#define VEC_DAC_CONFIG_DAC_CTRL(x) (x) -+ -+#define VEC_DAC_MISC 0x214 -+#define VEC_DAC_MISC_VCD_CTRL_MASK GENMASK(31, 16) -+#define VEC_DAC_MISC_VCD_CTRL(x) ((x) << 16) -+#define VEC_DAC_MISC_VID_ACT BIT(8) -+#define VEC_DAC_MISC_VCD_PWRDN BIT(6) -+#define VEC_DAC_MISC_BIAS_PWRDN BIT(5) -+#define VEC_DAC_MISC_DAC_PWRDN BIT(2) -+#define VEC_DAC_MISC_LDO_PWRDN BIT(1) -+#define VEC_DAC_MISC_DAC_RST_N BIT(0) -+ -+ -+/* General VEC hardware state. */ -+struct vc4_vec { -+ struct platform_device *pdev; -+ -+ struct drm_encoder *encoder; -+ struct drm_connector *connector; -+ -+ void __iomem *regs; -+ -+ struct clk *clock; -+ -+ const struct vc4_vec_tv_mode *tv_mode; -+}; -+ -+#define VEC_READ(offset) readl(vec->regs + (offset)) -+#define VEC_WRITE(offset, val) writel(val, vec->regs + (offset)) -+ -+/* VC4 VEC encoder KMS struct */ -+struct vc4_vec_encoder { -+ struct vc4_encoder base; -+ struct vc4_vec *vec; -+}; -+ -+static inline struct vc4_vec_encoder * -+to_vc4_vec_encoder(struct drm_encoder *encoder) -+{ -+ return container_of(encoder, struct vc4_vec_encoder, base.base); -+} -+ -+/* VC4 VEC connector KMS struct */ -+struct vc4_vec_connector { -+ struct drm_connector base; -+ struct vc4_vec *vec; -+ -+ /* Since the connector is attached to just the one encoder, -+ * this is the reference to it so we can do the best_encoder() -+ * hook. -+ */ -+ struct drm_encoder *encoder; -+}; -+ -+static inline struct vc4_vec_connector * -+to_vc4_vec_connector(struct drm_connector *connector) -+{ -+ return container_of(connector, struct vc4_vec_connector, base); -+} -+ -+enum vc4_vec_tv_mode_id { -+ VC4_VEC_TV_MODE_NTSC, -+ VC4_VEC_TV_MODE_NTSC_J, -+ VC4_VEC_TV_MODE_PAL, -+ VC4_VEC_TV_MODE_PAL_M, -+}; -+ -+struct vc4_vec_tv_mode { -+ const struct drm_display_mode *mode; -+ void (*mode_set)(struct vc4_vec *vec); -+}; -+ -+#define VEC_REG(reg) { reg, #reg } -+static const struct { -+ u32 reg; -+ const char *name; -+} vec_regs[] = { -+ VEC_REG(VEC_WSE_CONTROL), -+ VEC_REG(VEC_WSE_WSS_DATA), -+ VEC_REG(VEC_WSE_VPS_DATA1), -+ VEC_REG(VEC_WSE_VPS_CONTROL), -+ VEC_REG(VEC_REVID), -+ VEC_REG(VEC_CONFIG0), -+ VEC_REG(VEC_SCHPH), -+ VEC_REG(VEC_CLMP0_START), -+ VEC_REG(VEC_CLMP0_END), -+ VEC_REG(VEC_FREQ3_2), -+ VEC_REG(VEC_FREQ1_0), -+ VEC_REG(VEC_CONFIG1), -+ VEC_REG(VEC_CONFIG2), -+ VEC_REG(VEC_INTERRUPT_CONTROL), -+ VEC_REG(VEC_INTERRUPT_STATUS), -+ VEC_REG(VEC_FCW_SECAM_B), -+ VEC_REG(VEC_SECAM_GAIN_VAL), -+ VEC_REG(VEC_CONFIG3), -+ VEC_REG(VEC_STATUS0), -+ VEC_REG(VEC_MASK0), -+ VEC_REG(VEC_CFG), -+ VEC_REG(VEC_DAC_TEST), -+ VEC_REG(VEC_DAC_CONFIG), -+ VEC_REG(VEC_DAC_MISC), -+}; -+ -+#ifdef CONFIG_DEBUG_FS -+int vc4_vec_debugfs_regs(struct seq_file *m, void *unused) -+{ -+ struct drm_info_node *node = (struct drm_info_node *)m->private; -+ struct drm_device *dev = node->minor->dev; -+ struct vc4_dev *vc4 = to_vc4_dev(dev); -+ struct vc4_vec *vec = vc4->vec; -+ int i; -+ -+ if (!vec) -+ return 0; -+ -+ for (i = 0; i < ARRAY_SIZE(vec_regs); i++) { -+ seq_printf(m, "%s (0x%04x): 0x%08x\n", -+ vec_regs[i].name, vec_regs[i].reg, -+ VEC_READ(vec_regs[i].reg)); -+ } -+ -+ return 0; -+} -+#endif -+ -+static void vc4_vec_ntsc_mode_set(struct vc4_vec *vec) -+{ -+ VEC_WRITE(VEC_CONFIG0, VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN); -+ VEC_WRITE(VEC_CONFIG1, VEC_CONFIG1_C_CVBS_CVBS); -+} -+ -+static void vc4_vec_ntsc_j_mode_set(struct vc4_vec *vec) -+{ -+ VEC_WRITE(VEC_CONFIG0, VEC_CONFIG0_NTSC_STD); -+ VEC_WRITE(VEC_CONFIG1, VEC_CONFIG1_C_CVBS_CVBS); -+} -+ -+static const struct drm_display_mode ntsc_mode = { -+ DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 13500, -+ 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0, -+ 480, 480 + 3, 480 + 3 + 3, 480 + 3 + 3 + 16, 0, -+ DRM_MODE_FLAG_INTERLACE) -+}; -+ -+static void vc4_vec_pal_mode_set(struct vc4_vec *vec) -+{ -+ VEC_WRITE(VEC_CONFIG0, VEC_CONFIG0_PAL_BDGHI_STD); -+ VEC_WRITE(VEC_CONFIG1, VEC_CONFIG1_C_CVBS_CVBS); -+} -+ -+static void vc4_vec_pal_m_mode_set(struct vc4_vec *vec) -+{ -+ VEC_WRITE(VEC_CONFIG0, VEC_CONFIG0_PAL_BDGHI_STD); -+ VEC_WRITE(VEC_CONFIG1, -+ VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ); -+ VEC_WRITE(VEC_FREQ3_2, 0x223b); -+ VEC_WRITE(VEC_FREQ1_0, 0x61d1); -+} -+ -+static const struct drm_display_mode pal_mode = { -+ DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 13500, -+ 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0, -+ 576, 576 + 2, 576 + 2 + 3, 576 + 2 + 3 + 20, 0, -+ DRM_MODE_FLAG_INTERLACE) -+}; -+ -+static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = { -+ [VC4_VEC_TV_MODE_NTSC] = { -+ .mode = &ntsc_mode, -+ .mode_set = vc4_vec_ntsc_mode_set, -+ }, -+ [VC4_VEC_TV_MODE_NTSC_J] = { -+ .mode = &ntsc_mode, -+ .mode_set = vc4_vec_ntsc_j_mode_set, -+ }, -+ [VC4_VEC_TV_MODE_PAL] = { -+ .mode = &pal_mode, -+ .mode_set = vc4_vec_pal_mode_set, -+ }, -+ [VC4_VEC_TV_MODE_PAL_M] = { -+ .mode = &pal_mode, -+ .mode_set = vc4_vec_pal_m_mode_set, -+ }, -+}; -+ -+static enum drm_connector_status -+vc4_vec_connector_detect(struct drm_connector *connector, bool force) -+{ -+ return connector_status_unknown; -+} -+ -+static void vc4_vec_connector_destroy(struct drm_connector *connector) -+{ -+ drm_connector_unregister(connector); -+ drm_connector_cleanup(connector); -+} -+ -+static int vc4_vec_connector_get_modes(struct drm_connector *connector) -+{ -+ struct drm_connector_state *state = connector->state; -+ struct drm_display_mode *mode; -+ -+ mode = drm_mode_duplicate(connector->dev, -+ vc4_vec_tv_modes[state->tv.mode].mode); -+ if (!mode) { -+ DRM_ERROR("Failed to create a new display mode\n"); -+ return -ENOMEM; -+ } -+ -+ drm_mode_probed_add(connector, mode); -+ -+ return 1; -+} -+ -+static const struct drm_connector_funcs vc4_vec_connector_funcs = { -+ .dpms = drm_atomic_helper_connector_dpms, -+ .detect = vc4_vec_connector_detect, -+ .fill_modes = drm_helper_probe_single_connector_modes, -+ .set_property = drm_atomic_helper_connector_set_property, -+ .destroy = vc4_vec_connector_destroy, -+ .reset = drm_atomic_helper_connector_reset, -+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, -+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -+}; -+ -+static const struct drm_connector_helper_funcs vc4_vec_connector_helper_funcs = { -+ .get_modes = vc4_vec_connector_get_modes, -+}; -+ -+static struct drm_connector *vc4_vec_connector_init(struct drm_device *dev, -+ struct vc4_vec *vec) -+{ -+ struct drm_connector *connector = NULL; -+ struct vc4_vec_connector *vec_connector; -+ -+ vec_connector = devm_kzalloc(dev->dev, sizeof(*vec_connector), -+ GFP_KERNEL); -+ if (!vec_connector) -+ return ERR_PTR(-ENOMEM); -+ -+ connector = &vec_connector->base; -+ connector->interlace_allowed = true; -+ -+ vec_connector->encoder = vec->encoder; -+ vec_connector->vec = vec; -+ -+ drm_connector_init(dev, connector, &vc4_vec_connector_funcs, -+ DRM_MODE_CONNECTOR_Composite); -+ drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs); -+ -+ drm_object_attach_property(&connector->base, -+ dev->mode_config.tv_mode_property, -+ VC4_VEC_TV_MODE_NTSC); -+ vec->tv_mode = &vc4_vec_tv_modes[VC4_VEC_TV_MODE_NTSC]; -+ -+ drm_mode_connector_attach_encoder(connector, vec->encoder); -+ -+ return connector; -+} -+ -+static const struct drm_encoder_funcs vc4_vec_encoder_funcs = { -+ .destroy = drm_encoder_cleanup, -+}; -+ -+static void vc4_vec_encoder_disable(struct drm_encoder *encoder) -+{ -+ struct vc4_vec_encoder *vc4_vec_encoder = to_vc4_vec_encoder(encoder); -+ struct vc4_vec *vec = vc4_vec_encoder->vec; -+ int ret; -+ -+ VEC_WRITE(VEC_CFG, 0); -+ VEC_WRITE(VEC_DAC_MISC, -+ VEC_DAC_MISC_VCD_PWRDN | -+ VEC_DAC_MISC_BIAS_PWRDN | -+ VEC_DAC_MISC_DAC_PWRDN | -+ VEC_DAC_MISC_LDO_PWRDN); -+ -+ clk_disable_unprepare(vec->clock); -+ -+ ret = pm_runtime_put(&vec->pdev->dev); -+ if (ret < 0) { -+ DRM_ERROR("Failed to release power domain: %d\n", ret); -+ return; -+ } -+} -+ -+static void vc4_vec_encoder_enable(struct drm_encoder *encoder) -+{ -+ struct vc4_vec_encoder *vc4_vec_encoder = to_vc4_vec_encoder(encoder); -+ struct vc4_vec *vec = vc4_vec_encoder->vec; -+ int ret; -+ -+ ret = pm_runtime_get_sync(&vec->pdev->dev); -+ if (ret < 0) { -+ DRM_ERROR("Failed to retain power domain: %d\n", ret); -+ return; -+ } -+ -+ /* -+ * We need to set the clock rate each time we enable the encoder -+ * because there's a chance we share the same parent with the HDMI -+ * clock, and both drivers are requesting different rates. -+ * The good news is, these 2 encoders cannot be enabled at the same -+ * time, thus preventing incompatible rate requests. -+ */ -+ ret = clk_set_rate(vec->clock, 108000000); -+ if (ret) { -+ DRM_ERROR("Failed to set clock rate: %d\n", ret); -+ return; -+ } -+ -+ ret = clk_prepare_enable(vec->clock); -+ if (ret) { -+ DRM_ERROR("Failed to turn on core clock: %d\n", ret); -+ return; -+ } -+ -+ /* Reset the different blocks */ -+ VEC_WRITE(VEC_WSE_RESET, 1); -+ VEC_WRITE(VEC_SOFT_RESET, 1); -+ -+ /* Disable the CGSM-A and WSE blocks */ -+ VEC_WRITE(VEC_WSE_CONTROL, 0); -+ -+ /* Write config common to all modes. */ -+ -+ /* -+ * Color subcarrier phase: phase = 360 * SCHPH / 256. -+ * 0x28 <=> 39.375 deg. -+ */ -+ VEC_WRITE(VEC_SCHPH, 0x28); -+ -+ /* -+ * Reset to default values. -+ */ -+ VEC_WRITE(VEC_CLMP0_START, 0xac); -+ VEC_WRITE(VEC_CLMP0_END, 0xec); -+ VEC_WRITE(VEC_CONFIG2, -+ VEC_CONFIG2_UV_DIG_DIS | VEC_CONFIG2_RGB_DIG_DIS); -+ VEC_WRITE(VEC_CONFIG3, VEC_CONFIG3_HORIZ_LEN_STD); -+ VEC_WRITE(VEC_DAC_CONFIG, -+ VEC_DAC_CONFIG_DAC_CTRL(0xc) | -+ VEC_DAC_CONFIG_DRIVER_CTRL(0xc) | -+ VEC_DAC_CONFIG_LDO_BIAS_CTRL(0x46)); -+ -+ /* Mask all interrupts. */ -+ VEC_WRITE(VEC_MASK0, 0); -+ -+ vec->tv_mode->mode_set(vec); -+ -+ VEC_WRITE(VEC_DAC_MISC, -+ VEC_DAC_MISC_VID_ACT | VEC_DAC_MISC_DAC_RST_N); -+ VEC_WRITE(VEC_CFG, VEC_CFG_VEC_EN); -+} -+ -+ -+static bool vc4_vec_encoder_mode_fixup(struct drm_encoder *encoder, -+ const struct drm_display_mode *mode, -+ struct drm_display_mode *adjusted_mode) -+{ -+ return true; -+} -+ -+static void vc4_vec_encoder_atomic_mode_set(struct drm_encoder *encoder, -+ struct drm_crtc_state *crtc_state, -+ struct drm_connector_state *conn_state) -+{ -+ struct vc4_vec_encoder *vc4_vec_encoder = to_vc4_vec_encoder(encoder); -+ struct vc4_vec *vec = vc4_vec_encoder->vec; -+ -+ vec->tv_mode = &vc4_vec_tv_modes[conn_state->tv.mode]; -+} -+ -+static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder, -+ struct drm_crtc_state *crtc_state, -+ struct drm_connector_state *conn_state) -+{ -+ const struct vc4_vec_tv_mode *vec_mode; -+ -+ vec_mode = &vc4_vec_tv_modes[conn_state->tv.mode]; -+ -+ if (conn_state->crtc && -+ !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode)) -+ return -EINVAL; -+ -+ return 0; -+} -+ -+static const struct drm_encoder_helper_funcs vc4_vec_encoder_helper_funcs = { -+ .disable = vc4_vec_encoder_disable, -+ .enable = vc4_vec_encoder_enable, -+ .mode_fixup = vc4_vec_encoder_mode_fixup, -+ .atomic_check = vc4_vec_encoder_atomic_check, -+ .atomic_mode_set = vc4_vec_encoder_atomic_mode_set, -+}; -+ -+static const struct of_device_id vc4_vec_dt_match[] = { -+ { .compatible = "brcm,bcm2835-vec", .data = NULL }, -+ { /* sentinel */ }, -+}; -+ -+static const char * const tv_mode_names[] = { -+ [VC4_VEC_TV_MODE_NTSC] = "NTSC", -+ [VC4_VEC_TV_MODE_NTSC_J] = "NTSC-J", -+ [VC4_VEC_TV_MODE_PAL] = "PAL", -+ [VC4_VEC_TV_MODE_PAL_M] = "PAL-M", -+}; -+ -+static int vc4_vec_bind(struct device *dev, struct device *master, void *data) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ struct drm_device *drm = dev_get_drvdata(master); -+ struct vc4_dev *vc4 = to_vc4_dev(drm); -+ struct vc4_vec *vec; -+ struct vc4_vec_encoder *vc4_vec_encoder; -+ int ret; -+ -+ ret = drm_mode_create_tv_properties(drm, ARRAY_SIZE(tv_mode_names), -+ tv_mode_names); -+ if (ret) -+ return ret; -+ -+ vec = devm_kzalloc(dev, sizeof(*vec), GFP_KERNEL); -+ if (!vec) -+ return -ENOMEM; -+ -+ vc4_vec_encoder = devm_kzalloc(dev, sizeof(*vc4_vec_encoder), -+ GFP_KERNEL); -+ if (!vc4_vec_encoder) -+ return -ENOMEM; -+ vc4_vec_encoder->base.type = VC4_ENCODER_TYPE_VEC; -+ vc4_vec_encoder->vec = vec; -+ vec->encoder = &vc4_vec_encoder->base.base; -+ -+ vec->pdev = pdev; -+ vec->regs = vc4_ioremap_regs(pdev, 0); -+ if (IS_ERR(vec->regs)) -+ return PTR_ERR(vec->regs); -+ -+ vec->clock = devm_clk_get(dev, NULL); -+ if (IS_ERR(vec->clock)) { -+ ret = PTR_ERR(vec->clock); -+ if (ret != -EPROBE_DEFER) -+ DRM_ERROR("Failed to get clock: %d\n", ret); -+ return ret; -+ } -+ -+ pm_runtime_enable(dev); -+ -+ drm_encoder_init(drm, vec->encoder, &vc4_vec_encoder_funcs, -+ DRM_MODE_ENCODER_TVDAC, NULL); -+ drm_encoder_helper_add(vec->encoder, &vc4_vec_encoder_helper_funcs); -+ -+ vec->connector = vc4_vec_connector_init(drm, vec); -+ if (IS_ERR(vec->connector)) { -+ ret = PTR_ERR(vec->connector); -+ goto err_destroy_encoder; -+ } -+ -+ dev_set_drvdata(dev, vec); -+ -+ vc4->vec = vec; -+ -+ return 0; -+ -+err_destroy_encoder: -+ drm_encoder_cleanup(vec->encoder); -+ pm_runtime_disable(dev); -+ -+ return ret; -+} -+ -+static void vc4_vec_unbind(struct device *dev, struct device *master, -+ void *data) -+{ -+ struct drm_device *drm = dev_get_drvdata(master); -+ struct vc4_dev *vc4 = to_vc4_dev(drm); -+ struct vc4_vec *vec = dev_get_drvdata(dev); -+ -+ vc4_vec_connector_destroy(vec->connector); -+ drm_encoder_cleanup(vec->encoder); -+ pm_runtime_disable(dev); -+ -+ vc4->vec = NULL; -+} -+ -+static const struct component_ops vc4_vec_ops = { -+ .bind = vc4_vec_bind, -+ .unbind = vc4_vec_unbind, -+}; -+ -+static int vc4_vec_dev_probe(struct platform_device *pdev) -+{ -+ return component_add(&pdev->dev, &vc4_vec_ops); -+} -+ -+static int vc4_vec_dev_remove(struct platform_device *pdev) -+{ -+ component_del(&pdev->dev, &vc4_vec_ops); -+ return 0; -+} -+ -+struct platform_driver vc4_vec_driver = { -+ .probe = vc4_vec_dev_probe, -+ .remove = vc4_vec_dev_remove, -+ .driver = { -+ .name = "vc4_vec", -+ .of_match_table = vc4_vec_dt_match, -+ }, -+}; diff --git a/target/linux/brcm2708/patches-4.9/0171-drm-vc4-Set-up-SCALER_DISPCTRL-at-boot.patch b/target/linux/brcm2708/patches-4.9/0171-drm-vc4-Set-up-SCALER_DISPCTRL-at-boot.patch deleted file mode 100644 index 1a425cac008e..000000000000 --- a/target/linux/brcm2708/patches-4.9/0171-drm-vc4-Set-up-SCALER_DISPCTRL-at-boot.patch +++ /dev/null @@ -1,58 +0,0 @@ -From e79b86a0c5ccd0e8c16e31b2d494d43e997253d1 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 15 Sep 2016 15:25:23 +0100 -Subject: [PATCH] drm/vc4: Set up SCALER_DISPCTRL at boot. - -We want the HVS on, obviously, and we also want DSP3 (PV1's source) to -be muxed from HVS channel 2 like we expect in vc4_crtc.c. The -firmware wasn't setting the DSP3 mux up when both the LCD and HDMI -were disabled. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_hvs.c | 14 ++++++++++++++ - drivers/gpu/drm/vc4/vc4_regs.h | 3 +++ - 2 files changed, 17 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_hvs.c -+++ b/drivers/gpu/drm/vc4/vc4_hvs.c -@@ -170,6 +170,7 @@ static int vc4_hvs_bind(struct device *d - struct vc4_dev *vc4 = drm->dev_private; - struct vc4_hvs *hvs = NULL; - int ret; -+ u32 dispctrl; - - hvs = devm_kzalloc(&pdev->dev, sizeof(*hvs), GFP_KERNEL); - if (!hvs) -@@ -211,6 +212,19 @@ static int vc4_hvs_bind(struct device *d - return ret; - - vc4->hvs = hvs; -+ -+ dispctrl = HVS_READ(SCALER_DISPCTRL); -+ -+ dispctrl |= SCALER_DISPCTRL_ENABLE; -+ -+ /* Set DSP3 (PV1) to use HVS channel 2, which would otherwise -+ * be unused. -+ */ -+ dispctrl &= ~SCALER_DISPCTRL_DSP3_MUX_MASK; -+ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_DSP3_MUX); -+ -+ HVS_WRITE(SCALER_DISPCTRL, dispctrl); -+ - return 0; - } - ---- a/drivers/gpu/drm/vc4/vc4_regs.h -+++ b/drivers/gpu/drm/vc4/vc4_regs.h -@@ -244,6 +244,9 @@ - # define SCALER_DISPCTRL_ENABLE BIT(31) - # define SCALER_DISPCTRL_DSP2EISLUR BIT(15) - # define SCALER_DISPCTRL_DSP1EISLUR BIT(14) -+# define SCALER_DISPCTRL_DSP3_MUX_MASK VC4_MASK(19, 18) -+# define SCALER_DISPCTRL_DSP3_MUX_SHIFT 18 -+ - /* Enables Display 0 short line and underrun contribution to - * SCALER_DISPSTAT_IRQDISP0. Note that short frame contributions are - * always enabled. diff --git a/target/linux/brcm2708/patches-4.9/0172-drm-vc4-Add-support-for-feeding-DSI-encoders-from-th.patch b/target/linux/brcm2708/patches-4.9/0172-drm-vc4-Add-support-for-feeding-DSI-encoders-from-th.patch deleted file mode 100644 index 15243a32b7f1..000000000000 --- a/target/linux/brcm2708/patches-4.9/0172-drm-vc4-Add-support-for-feeding-DSI-encoders-from-th.patch +++ /dev/null @@ -1,113 +0,0 @@ -From 01ffdd37dcd3c9e526ac9135bfd289beb45f84a0 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 10 Feb 2016 16:17:29 -0800 -Subject: [PATCH] drm/vc4: Add support for feeding DSI encoders from the pixel - valve. - -We have to set a different pixel format, which tells the hardware to -use the pix_width field that's fed in sideband from the DSI encoder to -divide the "pixel" clock. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_crtc.c | 33 +++++++++++++++++++-------------- - drivers/gpu/drm/vc4/vc4_regs.h | 2 ++ - 2 files changed, 21 insertions(+), 14 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_crtc.c -+++ b/drivers/gpu/drm/vc4/vc4_crtc.c -@@ -352,38 +352,40 @@ static u32 vc4_get_fifo_full_level(u32 f - } - - /* -- * Returns the clock select bit for the connector attached to the -- * CRTC. -+ * Returns the encoder attached to the CRTC. -+ * -+ * VC4 can only scan out to one encoder at a time, while the DRM core -+ * allows drivers to push pixels to more than one encoder from the -+ * same CRTC. - */ --static int vc4_get_clock_select(struct drm_crtc *crtc) -+static struct drm_encoder *vc4_get_crtc_encoder(struct drm_crtc *crtc) - { - struct drm_connector *connector; - - drm_for_each_connector(connector, crtc->dev) { - if (connector->state->crtc == crtc) { -- struct drm_encoder *encoder = connector->encoder; -- struct vc4_encoder *vc4_encoder = -- to_vc4_encoder(encoder); -- -- return vc4_encoder->clock_select; -+ return connector->encoder; - } - } - -- return -1; -+ return NULL; - } - - static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc) - { - struct drm_device *dev = crtc->dev; - struct vc4_dev *vc4 = to_vc4_dev(dev); -+ struct drm_encoder *encoder = vc4_get_crtc_encoder(crtc); -+ struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder); - struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); - struct drm_crtc_state *state = crtc->state; - struct drm_display_mode *mode = &state->adjusted_mode; - bool interlace = mode->flags & DRM_MODE_FLAG_INTERLACE; - u32 pixel_rep = (mode->flags & DRM_MODE_FLAG_DBLCLK) ? 2 : 1; -- u32 format = PV_CONTROL_FORMAT_24; -+ bool is_dsi = (vc4_encoder->type == VC4_ENCODER_TYPE_DSI0 || -+ vc4_encoder->type == VC4_ENCODER_TYPE_DSI1); -+ u32 format = is_dsi ? PV_CONTROL_FORMAT_DSIV_24 : PV_CONTROL_FORMAT_24; - bool debug_dump_regs = false; -- int clock_select = vc4_get_clock_select(crtc); - - if (debug_dump_regs) { - DRM_INFO("CRTC %d regs before:\n", drm_crtc_index(crtc)); -@@ -439,17 +441,19 @@ static void vc4_crtc_mode_set_nofb(struc - */ - CRTC_WRITE(PV_V_CONTROL, - PV_VCONTROL_CONTINUOUS | -+ (is_dsi ? PV_VCONTROL_DSI : 0) | - PV_VCONTROL_INTERLACE | - VC4_SET_FIELD(mode->htotal * pixel_rep / 2, - PV_VCONTROL_ODD_DELAY)); - CRTC_WRITE(PV_VSYNCD_EVEN, 0); - } else { -- CRTC_WRITE(PV_V_CONTROL, PV_VCONTROL_CONTINUOUS); -+ CRTC_WRITE(PV_V_CONTROL, -+ PV_VCONTROL_CONTINUOUS | -+ (is_dsi ? PV_VCONTROL_DSI : 0)); - } - - CRTC_WRITE(PV_HACT_ACT, mode->hdisplay * pixel_rep); - -- - CRTC_WRITE(PV_CONTROL, - VC4_SET_FIELD(format, PV_CONTROL_FORMAT) | - VC4_SET_FIELD(vc4_get_fifo_full_level(format), -@@ -458,7 +462,8 @@ static void vc4_crtc_mode_set_nofb(struc - PV_CONTROL_CLR_AT_START | - PV_CONTROL_TRIGGER_UNDERFLOW | - PV_CONTROL_WAIT_HSTART | -- VC4_SET_FIELD(clock_select, PV_CONTROL_CLK_SELECT) | -+ VC4_SET_FIELD(vc4_encoder->clock_select, -+ PV_CONTROL_CLK_SELECT) | - PV_CONTROL_FIFO_CLR | - PV_CONTROL_EN); - ---- a/drivers/gpu/drm/vc4/vc4_regs.h -+++ b/drivers/gpu/drm/vc4/vc4_regs.h -@@ -190,6 +190,8 @@ - # define PV_VCONTROL_ODD_DELAY_SHIFT 6 - # define PV_VCONTROL_ODD_FIRST BIT(5) - # define PV_VCONTROL_INTERLACE BIT(4) -+# define PV_VCONTROL_DSI BIT(3) -+# define PV_VCONTROL_COMMAND BIT(2) - # define PV_VCONTROL_CONTINUOUS BIT(1) - # define PV_VCONTROL_VIDEN BIT(0) - diff --git a/target/linux/brcm2708/patches-4.9/0173-drm-vc4-Add-DSI-driver.patch b/target/linux/brcm2708/patches-4.9/0173-drm-vc4-Add-DSI-driver.patch deleted file mode 100644 index 97ae4a470a48..000000000000 --- a/target/linux/brcm2708/patches-4.9/0173-drm-vc4-Add-DSI-driver.patch +++ /dev/null @@ -1,1817 +0,0 @@ -From 38ea3f3665eaa9deedc3588196fe9ba9bb4032ec Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 10 Feb 2016 11:42:32 -0800 -Subject: [PATCH] drm/vc4: Add DSI driver - -The DSI0 and DSI1 blocks on the 2835 are related hardware blocks. -Some registers move around, and the featureset is slightly different, -as DSI1 (the 4-lane DSI) is a later version of the hardware block. -This driver doesn't yet enable DSI0, since we don't have any hardware -to test against, but it does put a lot of the register definitions and -code in place. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/Kconfig | 2 + - drivers/gpu/drm/vc4/Makefile | 1 + - drivers/gpu/drm/vc4/vc4_debugfs.c | 1 + - drivers/gpu/drm/vc4/vc4_drv.c | 1 + - drivers/gpu/drm/vc4/vc4_drv.h | 5 + - drivers/gpu/drm/vc4/vc4_dsi.c | 1725 +++++++++++++++++++++++++++++++++++++ - 6 files changed, 1735 insertions(+) - create mode 100644 drivers/gpu/drm/vc4/vc4_dsi.c - ---- a/drivers/gpu/drm/vc4/Kconfig -+++ b/drivers/gpu/drm/vc4/Kconfig -@@ -2,10 +2,12 @@ config DRM_VC4 - tristate "Broadcom VC4 Graphics" - depends on ARCH_BCM2835 || COMPILE_TEST - depends on DRM -+ depends on COMMON_CLK - select DRM_KMS_HELPER - select DRM_KMS_CMA_HELPER - select DRM_GEM_CMA_HELPER - select DRM_PANEL -+ select DRM_MIPI_DSI - help - Choose this option if you have a system that has a Broadcom - VC4 GPU, such as the Raspberry Pi or other BCM2708/BCM2835. ---- a/drivers/gpu/drm/vc4/Makefile -+++ b/drivers/gpu/drm/vc4/Makefile -@@ -8,6 +8,7 @@ vc4-y := \ - vc4_crtc.o \ - vc4_drv.o \ - vc4_dpi.o \ -+ vc4_dsi.o \ - vc4_firmware_kms.o \ - vc4_kms.o \ - vc4_gem.o \ ---- a/drivers/gpu/drm/vc4/vc4_debugfs.c -+++ b/drivers/gpu/drm/vc4/vc4_debugfs.c -@@ -18,6 +18,7 @@ - static const struct drm_info_list vc4_debugfs_list[] = { - {"bo_stats", vc4_bo_stats_debugfs, 0}, - {"dpi_regs", vc4_dpi_debugfs_regs, 0}, -+ {"dsi1_regs", vc4_dsi_debugfs_regs, 0, (void *)(uintptr_t)1}, - {"hdmi_regs", vc4_hdmi_debugfs_regs, 0}, - {"vec_regs", vc4_vec_debugfs_regs, 0}, - {"hvs_regs", vc4_hvs_debugfs_regs, 0}, ---- a/drivers/gpu/drm/vc4/vc4_drv.c -+++ b/drivers/gpu/drm/vc4/vc4_drv.c -@@ -296,6 +296,7 @@ static struct platform_driver *const com - &vc4_hdmi_driver, - &vc4_vec_driver, - &vc4_dpi_driver, -+ &vc4_dsi_driver, - &vc4_hvs_driver, - &vc4_crtc_driver, - &vc4_firmware_kms_driver, ---- a/drivers/gpu/drm/vc4/vc4_drv.h -+++ b/drivers/gpu/drm/vc4/vc4_drv.h -@@ -20,6 +20,7 @@ struct vc4_dev { - struct vc4_crtc *crtc[3]; - struct vc4_v3d *v3d; - struct vc4_dpi *dpi; -+ struct vc4_dsi *dsi1; - struct vc4_vec *vec; - - struct drm_fbdev_cma *fbdev; -@@ -468,6 +469,10 @@ void __iomem *vc4_ioremap_regs(struct pl - extern struct platform_driver vc4_dpi_driver; - int vc4_dpi_debugfs_regs(struct seq_file *m, void *unused); - -+/* vc4_dsi.c */ -+extern struct platform_driver vc4_dsi_driver; -+int vc4_dsi_debugfs_regs(struct seq_file *m, void *unused); -+ - /* vc4_firmware_kms.c */ - extern struct platform_driver vc4_firmware_kms_driver; - void vc4_fkms_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file); ---- /dev/null -+++ b/drivers/gpu/drm/vc4/vc4_dsi.c -@@ -0,0 +1,1725 @@ -+/* -+ * Copyright (C) 2016 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published by -+ * the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+/** -+ * DOC: VC4 DSI0/DSI1 module -+ * -+ * BCM2835 contains two DSI modules, DSI0 and DSI1. DSI0 is a -+ * single-lane DSI controller, while DSI1 is a more modern 4-lane DSI -+ * controller. -+ * -+ * Most Raspberry Pi boards expose DSI1 as their "DISPLAY" connector, -+ * while the compute module brings both DSI0 and DSI1 out. -+ * -+ * This driver has been tested for DSI1 video-mode display only -+ * currently, with most of the information necessary for DSI0 -+ * hopefully present. -+ */ -+ -+#include "drm_atomic_helper.h" -+#include "drm_crtc_helper.h" -+#include "drm_edid.h" -+#include "drm_mipi_dsi.h" -+#include "drm_panel.h" -+#include "linux/clk.h" -+#include "linux/clk-provider.h" -+#include "linux/completion.h" -+#include "linux/component.h" -+#include "linux/dmaengine.h" -+#include "linux/i2c.h" -+#include "linux/of_address.h" -+#include "linux/of_platform.h" -+#include "linux/pm_runtime.h" -+#include "vc4_drv.h" -+#include "vc4_regs.h" -+ -+#define DSI_CMD_FIFO_DEPTH 16 -+#define DSI_PIX_FIFO_DEPTH 256 -+#define DSI_PIX_FIFO_WIDTH 4 -+ -+#define DSI0_CTRL 0x00 -+ -+/* Command packet control. */ -+#define DSI0_TXPKT1C 0x04 /* AKA PKTC */ -+#define DSI1_TXPKT1C 0x04 -+# define DSI_TXPKT1C_TRIG_CMD_MASK VC4_MASK(31, 24) -+# define DSI_TXPKT1C_TRIG_CMD_SHIFT 24 -+# define DSI_TXPKT1C_CMD_REPEAT_MASK VC4_MASK(23, 10) -+# define DSI_TXPKT1C_CMD_REPEAT_SHIFT 10 -+ -+# define DSI_TXPKT1C_DISPLAY_NO_MASK VC4_MASK(9, 8) -+# define DSI_TXPKT1C_DISPLAY_NO_SHIFT 8 -+/* Short, trigger, BTA, or a long packet that fits all in CMDFIFO. */ -+# define DSI_TXPKT1C_DISPLAY_NO_SHORT 0 -+/* Primary display where cmdfifo provides part of the payload and -+ * pixelvalve the rest. -+ */ -+# define DSI_TXPKT1C_DISPLAY_NO_PRIMARY 1 -+/* Secondary display where cmdfifo provides part of the payload and -+ * pixfifo the rest. -+ */ -+# define DSI_TXPKT1C_DISPLAY_NO_SECONDARY 2 -+ -+# define DSI_TXPKT1C_CMD_TX_TIME_MASK VC4_MASK(7, 6) -+# define DSI_TXPKT1C_CMD_TX_TIME_SHIFT 6 -+ -+# define DSI_TXPKT1C_CMD_CTRL_MASK VC4_MASK(5, 4) -+# define DSI_TXPKT1C_CMD_CTRL_SHIFT 4 -+/* Command only. Uses TXPKT1H and DISPLAY_NO */ -+# define DSI_TXPKT1C_CMD_CTRL_TX 0 -+/* Command with BTA for either ack or read data. */ -+# define DSI_TXPKT1C_CMD_CTRL_RX 1 -+/* Trigger according to TRIG_CMD */ -+# define DSI_TXPKT1C_CMD_CTRL_TRIG 2 -+/* BTA alone for getting error status after a command, or a TE trigger -+ * without a previous command. -+ */ -+# define DSI_TXPKT1C_CMD_CTRL_BTA 3 -+ -+# define DSI_TXPKT1C_CMD_MODE_LP BIT(3) -+# define DSI_TXPKT1C_CMD_TYPE_LONG BIT(2) -+# define DSI_TXPKT1C_CMD_TE_EN BIT(1) -+# define DSI_TXPKT1C_CMD_EN BIT(0) -+ -+/* Command packet header. */ -+#define DSI0_TXPKT1H 0x08 /* AKA PKTH */ -+#define DSI1_TXPKT1H 0x08 -+# define DSI_TXPKT1H_BC_CMDFIFO_MASK VC4_MASK(31, 24) -+# define DSI_TXPKT1H_BC_CMDFIFO_SHIFT 24 -+# define DSI_TXPKT1H_BC_PARAM_MASK VC4_MASK(23, 8) -+# define DSI_TXPKT1H_BC_PARAM_SHIFT 8 -+# define DSI_TXPKT1H_BC_DT_MASK VC4_MASK(7, 0) -+# define DSI_TXPKT1H_BC_DT_SHIFT 0 -+ -+#define DSI0_RXPKT1H 0x0c /* AKA RX1_PKTH */ -+#define DSI1_RXPKT1H 0x14 -+# define DSI_RXPKT1H_CRC_ERR BIT(31) -+# define DSI_RXPKT1H_DET_ERR BIT(30) -+# define DSI_RXPKT1H_ECC_ERR BIT(29) -+# define DSI_RXPKT1H_COR_ERR BIT(28) -+# define DSI_RXPKT1H_INCOMP_PKT BIT(25) -+# define DSI_RXPKT1H_PKT_TYPE_LONG BIT(24) -+/* Byte count if DSI_RXPKT1H_PKT_TYPE_LONG */ -+# define DSI_RXPKT1H_BC_PARAM_MASK VC4_MASK(23, 8) -+# define DSI_RXPKT1H_BC_PARAM_SHIFT 8 -+/* Short return bytes if !DSI_RXPKT1H_PKT_TYPE_LONG */ -+# define DSI_RXPKT1H_SHORT_1_MASK VC4_MASK(23, 16) -+# define DSI_RXPKT1H_SHORT_1_SHIFT 16 -+# define DSI_RXPKT1H_SHORT_0_MASK VC4_MASK(15, 8) -+# define DSI_RXPKT1H_SHORT_0_SHIFT 8 -+# define DSI_RXPKT1H_DT_LP_CMD_MASK VC4_MASK(7, 0) -+# define DSI_RXPKT1H_DT_LP_CMD_SHIFT 0 -+ -+#define DSI0_RXPKT2H 0x10 /* AKA RX2_PKTH */ -+#define DSI1_RXPKT2H 0x18 -+# define DSI_RXPKT1H_DET_ERR BIT(30) -+# define DSI_RXPKT1H_ECC_ERR BIT(29) -+# define DSI_RXPKT1H_COR_ERR BIT(28) -+# define DSI_RXPKT1H_INCOMP_PKT BIT(25) -+# define DSI_RXPKT1H_BC_PARAM_MASK VC4_MASK(23, 8) -+# define DSI_RXPKT1H_BC_PARAM_SHIFT 8 -+# define DSI_RXPKT1H_DT_MASK VC4_MASK(7, 0) -+# define DSI_RXPKT1H_DT_SHIFT 0 -+ -+#define DSI0_TXPKT_CMD_FIFO 0x14 /* AKA CMD_DATAF */ -+#define DSI1_TXPKT_CMD_FIFO 0x1c -+ -+#define DSI0_DISP0_CTRL 0x18 -+# define DSI_DISP0_PIX_CLK_DIV_MASK VC4_MASK(21, 13) -+# define DSI_DISP0_PIX_CLK_DIV_SHIFT 13 -+# define DSI_DISP0_LP_STOP_CTRL_MASK VC4_MASK(12, 11) -+# define DSI_DISP0_LP_STOP_CTRL_SHIFT 11 -+# define DSI_DISP0_LP_STOP_DISABLE 0 -+# define DSI_DISP0_LP_STOP_PERLINE 1 -+# define DSI_DISP0_LP_STOP_PERFRAME 2 -+ -+/* Transmit RGB pixels and null packets only during HACTIVE, instead -+ * of going to LP-STOP. -+ */ -+# define DSI_DISP_HACTIVE_NULL BIT(10) -+/* Transmit blanking packet only during vblank, instead of allowing LP-STOP. */ -+# define DSI_DISP_VBLP_CTRL BIT(9) -+/* Transmit blanking packet only during HFP, instead of allowing LP-STOP. */ -+# define DSI_DISP_HFP_CTRL BIT(8) -+/* Transmit blanking packet only during HBP, instead of allowing LP-STOP. */ -+# define DSI_DISP_HBP_CTRL BIT(7) -+# define DSI_DISP0_CHANNEL_MASK VC4_MASK(6, 5) -+# define DSI_DISP0_CHANNEL_SHIFT 5 -+/* Enables end events for HSYNC/VSYNC, not just start events. */ -+# define DSI_DISP0_ST_END BIT(4) -+# define DSI_DISP0_PFORMAT_MASK VC4_MASK(3, 2) -+# define DSI_DISP0_PFORMAT_SHIFT 2 -+# define DSI_PFORMAT_RGB565 0 -+# define DSI_PFORMAT_RGB666_PACKED 1 -+# define DSI_PFORMAT_RGB666 2 -+# define DSI_PFORMAT_RGB888 3 -+/* Default is VIDEO mode. */ -+# define DSI_DISP0_COMMAND_MODE BIT(1) -+# define DSI_DISP0_ENABLE BIT(0) -+ -+#define DSI0_DISP1_CTRL 0x1c -+#define DSI1_DISP1_CTRL 0x2c -+/* Format of the data written to TXPKT_PIX_FIFO. */ -+# define DSI_DISP1_PFORMAT_MASK VC4_MASK(2, 1) -+# define DSI_DISP1_PFORMAT_SHIFT 1 -+# define DSI_DISP1_PFORMAT_16BIT 0 -+# define DSI_DISP1_PFORMAT_24BIT 1 -+# define DSI_DISP1_PFORMAT_32BIT_LE 2 -+# define DSI_DISP1_PFORMAT_32BIT_BE 3 -+ -+/* DISP1 is always command mode. */ -+# define DSI_DISP1_ENABLE BIT(0) -+ -+#define DSI0_TXPKT_PIX_FIFO 0x20 /* AKA PIX_FIFO */ -+ -+#define DSI0_INT_STAT 0x24 -+#define DSI0_INT_EN 0x28 -+# define DSI1_INT_PHY_D3_ULPS BIT(30) -+# define DSI1_INT_PHY_D3_STOP BIT(29) -+# define DSI1_INT_PHY_D2_ULPS BIT(28) -+# define DSI1_INT_PHY_D2_STOP BIT(27) -+# define DSI1_INT_PHY_D1_ULPS BIT(26) -+# define DSI1_INT_PHY_D1_STOP BIT(25) -+# define DSI1_INT_PHY_D0_ULPS BIT(24) -+# define DSI1_INT_PHY_D0_STOP BIT(23) -+# define DSI1_INT_FIFO_ERR BIT(22) -+# define DSI1_INT_PHY_DIR_RTF BIT(21) -+# define DSI1_INT_PHY_RXLPDT BIT(20) -+# define DSI1_INT_PHY_RXTRIG BIT(19) -+# define DSI1_INT_PHY_D0_LPDT BIT(18) -+# define DSI1_INT_PHY_DIR_FTR BIT(17) -+ -+/* Signaled when the clock lane enters the given state. */ -+# define DSI1_INT_PHY_CLOCK_ULPS BIT(16) -+# define DSI1_INT_PHY_CLOCK_HS BIT(15) -+# define DSI1_INT_PHY_CLOCK_STOP BIT(14) -+ -+/* Signaled on timeouts */ -+# define DSI1_INT_PR_TO BIT(13) -+# define DSI1_INT_TA_TO BIT(12) -+# define DSI1_INT_LPRX_TO BIT(11) -+# define DSI1_INT_HSTX_TO BIT(10) -+ -+/* Contention on a line when trying to drive the line low */ -+# define DSI1_INT_ERR_CONT_LP1 BIT(9) -+# define DSI1_INT_ERR_CONT_LP0 BIT(8) -+ -+/* Control error: incorrect line state sequence on data lane 0. */ -+# define DSI1_INT_ERR_CONTROL BIT(7) -+/* LPDT synchronization error (bits received not a multiple of 8. */ -+ -+# define DSI1_INT_ERR_SYNC_ESC BIT(6) -+/* Signaled after receiving an error packet from the display in -+ * response to a read. -+ */ -+# define DSI1_INT_RXPKT2 BIT(5) -+/* Signaled after receiving a packet. The header and optional short -+ * response will be in RXPKT1H, and a long response will be in the -+ * RXPKT_FIFO. -+ */ -+# define DSI1_INT_RXPKT1 BIT(4) -+# define DSI1_INT_TXPKT2_DONE BIT(3) -+# define DSI1_INT_TXPKT2_END BIT(2) -+/* Signaled after all repeats of TXPKT1 are transferred. */ -+# define DSI1_INT_TXPKT1_DONE BIT(1) -+/* Signaled after each TXPKT1 repeat is scheduled. */ -+# define DSI1_INT_TXPKT1_END BIT(0) -+ -+#define DSI1_INTERRUPTS_ALWAYS_ENABLED (DSI1_INT_ERR_SYNC_ESC | \ -+ DSI1_INT_ERR_CONTROL | \ -+ DSI1_INT_ERR_CONT_LP0 | \ -+ DSI1_INT_ERR_CONT_LP1 | \ -+ DSI1_INT_HSTX_TO | \ -+ DSI1_INT_LPRX_TO | \ -+ DSI1_INT_TA_TO | \ -+ DSI1_INT_PR_TO) -+ -+#define DSI0_STAT 0x2c -+#define DSI0_HSTX_TO_CNT 0x30 -+#define DSI0_LPRX_TO_CNT 0x34 -+#define DSI0_TA_TO_CNT 0x38 -+#define DSI0_PR_TO_CNT 0x3c -+#define DSI0_PHYC 0x40 -+# define DSI1_PHYC_ESC_CLK_LPDT_MASK VC4_MASK(25, 20) -+# define DSI1_PHYC_ESC_CLK_LPDT_SHIFT 20 -+# define DSI1_PHYC_HS_CLK_CONTINUOUS BIT(18) -+# define DSI0_PHYC_ESC_CLK_LPDT_MASK VC4_MASK(17, 12) -+# define DSI0_PHYC_ESC_CLK_LPDT_SHIFT 12 -+# define DSI1_PHYC_CLANE_ULPS BIT(17) -+# define DSI1_PHYC_CLANE_ENABLE BIT(16) -+# define DSI_PHYC_DLANE3_ULPS BIT(13) -+# define DSI_PHYC_DLANE3_ENABLE BIT(12) -+# define DSI0_PHYC_HS_CLK_CONTINUOUS BIT(10) -+# define DSI0_PHYC_CLANE_ULPS BIT(9) -+# define DSI_PHYC_DLANE2_ULPS BIT(9) -+# define DSI0_PHYC_CLANE_ENABLE BIT(8) -+# define DSI_PHYC_DLANE2_ENABLE BIT(8) -+# define DSI_PHYC_DLANE1_ULPS BIT(5) -+# define DSI_PHYC_DLANE1_ENABLE BIT(4) -+# define DSI_PHYC_DLANE0_FORCE_STOP BIT(2) -+# define DSI_PHYC_DLANE0_ULPS BIT(1) -+# define DSI_PHYC_DLANE0_ENABLE BIT(0) -+ -+#define DSI0_HS_CLT0 0x44 -+#define DSI0_HS_CLT1 0x48 -+#define DSI0_HS_CLT2 0x4c -+#define DSI0_HS_DLT3 0x50 -+#define DSI0_HS_DLT4 0x54 -+#define DSI0_HS_DLT5 0x58 -+#define DSI0_HS_DLT6 0x5c -+#define DSI0_HS_DLT7 0x60 -+ -+#define DSI0_PHY_AFEC0 0x64 -+# define DSI0_PHY_AFEC0_DDR2CLK_EN BIT(26) -+# define DSI0_PHY_AFEC0_DDRCLK_EN BIT(25) -+# define DSI0_PHY_AFEC0_LATCH_ULPS BIT(24) -+# define DSI1_PHY_AFEC0_IDR_DLANE3_MASK VC4_MASK(31, 29) -+# define DSI1_PHY_AFEC0_IDR_DLANE3_SHIFT 29 -+# define DSI1_PHY_AFEC0_IDR_DLANE2_MASK VC4_MASK(28, 26) -+# define DSI1_PHY_AFEC0_IDR_DLANE2_SHIFT 26 -+# define DSI1_PHY_AFEC0_IDR_DLANE1_MASK VC4_MASK(27, 23) -+# define DSI1_PHY_AFEC0_IDR_DLANE1_SHIFT 23 -+# define DSI1_PHY_AFEC0_IDR_DLANE0_MASK VC4_MASK(22, 20) -+# define DSI1_PHY_AFEC0_IDR_DLANE0_SHIFT 20 -+# define DSI1_PHY_AFEC0_IDR_CLANE_MASK VC4_MASK(19, 17) -+# define DSI1_PHY_AFEC0_IDR_CLANE_SHIFT 17 -+# define DSI0_PHY_AFEC0_ACTRL_DLANE1_MASK VC4_MASK(23, 20) -+# define DSI0_PHY_AFEC0_ACTRL_DLANE1_SHIFT 20 -+# define DSI0_PHY_AFEC0_ACTRL_DLANE0_MASK VC4_MASK(19, 16) -+# define DSI0_PHY_AFEC0_ACTRL_DLANE0_SHIFT 16 -+# define DSI0_PHY_AFEC0_ACTRL_CLANE_MASK VC4_MASK(15, 12) -+# define DSI0_PHY_AFEC0_ACTRL_CLANE_SHIFT 12 -+# define DSI1_PHY_AFEC0_DDR2CLK_EN BIT(16) -+# define DSI1_PHY_AFEC0_DDRCLK_EN BIT(15) -+# define DSI1_PHY_AFEC0_LATCH_ULPS BIT(14) -+# define DSI1_PHY_AFEC0_RESET BIT(13) -+# define DSI1_PHY_AFEC0_PD BIT(12) -+# define DSI0_PHY_AFEC0_RESET BIT(11) -+# define DSI1_PHY_AFEC0_PD_BG BIT(11) -+# define DSI0_PHY_AFEC0_PD BIT(10) -+# define DSI1_PHY_AFEC0_PD_DLANE3 BIT(10) -+# define DSI0_PHY_AFEC0_PD_BG BIT(9) -+# define DSI1_PHY_AFEC0_PD_DLANE2 BIT(9) -+# define DSI0_PHY_AFEC0_PD_DLANE1 BIT(8) -+# define DSI1_PHY_AFEC0_PD_DLANE1 BIT(8) -+# define DSI_PHY_AFEC0_PTATADJ_MASK VC4_MASK(7, 4) -+# define DSI_PHY_AFEC0_PTATADJ_SHIFT 4 -+# define DSI_PHY_AFEC0_CTATADJ_MASK VC4_MASK(3, 0) -+# define DSI_PHY_AFEC0_CTATADJ_SHIFT 0 -+ -+#define DSI0_PHY_AFEC1 0x68 -+# define DSI0_PHY_AFEC1_IDR_DLANE1_MASK VC4_MASK(10, 8) -+# define DSI0_PHY_AFEC1_IDR_DLANE1_SHIFT 8 -+# define DSI0_PHY_AFEC1_IDR_DLANE0_MASK VC4_MASK(6, 4) -+# define DSI0_PHY_AFEC1_IDR_DLANE0_SHIFT 4 -+# define DSI0_PHY_AFEC1_IDR_CLANE_MASK VC4_MASK(2, 0) -+# define DSI0_PHY_AFEC1_IDR_CLANE_SHIFT 0 -+ -+#define DSI0_TST_SEL 0x6c -+#define DSI0_TST_MON 0x70 -+#define DSI0_ID 0x74 -+# define DSI_ID_VALUE 0x00647369 -+ -+#define DSI1_CTRL 0x00 -+# define DSI_CTRL_HS_CLKC_MASK VC4_MASK(15, 14) -+# define DSI_CTRL_HS_CLKC_SHIFT 14 -+# define DSI_CTRL_HS_CLKC_BYTE 0 -+# define DSI_CTRL_HS_CLKC_DDR2 1 -+# define DSI_CTRL_HS_CLKC_DDR 2 -+ -+# define DSI_CTRL_RX_LPDT_EOT_DISABLE BIT(13) -+# define DSI_CTRL_LPDT_EOT_DISABLE BIT(12) -+# define DSI_CTRL_HSDT_EOT_DISABLE BIT(11) -+# define DSI_CTRL_SOFT_RESET_CFG BIT(10) -+# define DSI_CTRL_CAL_BYTE BIT(9) -+# define DSI_CTRL_INV_BYTE BIT(8) -+# define DSI_CTRL_CLR_LDF BIT(7) -+# define DSI0_CTRL_CLR_PBCF BIT(6) -+# define DSI1_CTRL_CLR_RXF BIT(6) -+# define DSI0_CTRL_CLR_CPBCF BIT(5) -+# define DSI1_CTRL_CLR_PDF BIT(5) -+# define DSI0_CTRL_CLR_PDF BIT(4) -+# define DSI1_CTRL_CLR_CDF BIT(4) -+# define DSI0_CTRL_CLR_CDF BIT(3) -+# define DSI0_CTRL_CTRL2 BIT(2) -+# define DSI1_CTRL_DISABLE_DISP_CRCC BIT(2) -+# define DSI0_CTRL_CTRL1 BIT(1) -+# define DSI1_CTRL_DISABLE_DISP_ECCC BIT(1) -+# define DSI0_CTRL_CTRL0 BIT(0) -+# define DSI1_CTRL_EN BIT(0) -+# define DSI0_CTRL_RESET_FIFOS (DSI_CTRL_CLR_LDF | \ -+ DSI0_CTRL_CLR_PBCF | \ -+ DSI0_CTRL_CLR_CPBCF | \ -+ DSI0_CTRL_CLR_PDF | \ -+ DSI0_CTRL_CLR_CDF) -+# define DSI1_CTRL_RESET_FIFOS (DSI_CTRL_CLR_LDF | \ -+ DSI1_CTRL_CLR_RXF | \ -+ DSI1_CTRL_CLR_PDF | \ -+ DSI1_CTRL_CLR_CDF) -+ -+#define DSI1_TXPKT2C 0x0c -+#define DSI1_TXPKT2H 0x10 -+#define DSI1_TXPKT_PIX_FIFO 0x20 -+#define DSI1_RXPKT_FIFO 0x24 -+#define DSI1_DISP0_CTRL 0x28 -+#define DSI1_INT_STAT 0x30 -+#define DSI1_INT_EN 0x34 -+/* State reporting bits. These mostly behave like INT_STAT, where -+ * writing a 1 clears the bit. -+ */ -+#define DSI1_STAT 0x38 -+# define DSI1_STAT_PHY_D3_ULPS BIT(31) -+# define DSI1_STAT_PHY_D3_STOP BIT(30) -+# define DSI1_STAT_PHY_D2_ULPS BIT(29) -+# define DSI1_STAT_PHY_D2_STOP BIT(28) -+# define DSI1_STAT_PHY_D1_ULPS BIT(27) -+# define DSI1_STAT_PHY_D1_STOP BIT(26) -+# define DSI1_STAT_PHY_D0_ULPS BIT(25) -+# define DSI1_STAT_PHY_D0_STOP BIT(24) -+# define DSI1_STAT_FIFO_ERR BIT(23) -+# define DSI1_STAT_PHY_RXLPDT BIT(22) -+# define DSI1_STAT_PHY_RXTRIG BIT(21) -+# define DSI1_STAT_PHY_D0_LPDT BIT(20) -+/* Set when in forward direction */ -+# define DSI1_STAT_PHY_DIR BIT(19) -+# define DSI1_STAT_PHY_CLOCK_ULPS BIT(18) -+# define DSI1_STAT_PHY_CLOCK_HS BIT(17) -+# define DSI1_STAT_PHY_CLOCK_STOP BIT(16) -+# define DSI1_STAT_PR_TO BIT(15) -+# define DSI1_STAT_TA_TO BIT(14) -+# define DSI1_STAT_LPRX_TO BIT(13) -+# define DSI1_STAT_HSTX_TO BIT(12) -+# define DSI1_STAT_ERR_CONT_LP1 BIT(11) -+# define DSI1_STAT_ERR_CONT_LP0 BIT(10) -+# define DSI1_STAT_ERR_CONTROL BIT(9) -+# define DSI1_STAT_ERR_SYNC_ESC BIT(8) -+# define DSI1_STAT_RXPKT2 BIT(7) -+# define DSI1_STAT_RXPKT1 BIT(6) -+# define DSI1_STAT_TXPKT2_BUSY BIT(5) -+# define DSI1_STAT_TXPKT2_DONE BIT(4) -+# define DSI1_STAT_TXPKT2_END BIT(3) -+# define DSI1_STAT_TXPKT1_BUSY BIT(2) -+# define DSI1_STAT_TXPKT1_DONE BIT(1) -+# define DSI1_STAT_TXPKT1_END BIT(0) -+ -+#define DSI1_HSTX_TO_CNT 0x3c -+#define DSI1_LPRX_TO_CNT 0x40 -+#define DSI1_TA_TO_CNT 0x44 -+#define DSI1_PR_TO_CNT 0x48 -+#define DSI1_PHYC 0x4c -+ -+#define DSI1_HS_CLT0 0x50 -+# define DSI_HS_CLT0_CZERO_MASK VC4_MASK(26, 18) -+# define DSI_HS_CLT0_CZERO_SHIFT 18 -+# define DSI_HS_CLT0_CPRE_MASK VC4_MASK(17, 9) -+# define DSI_HS_CLT0_CPRE_SHIFT 9 -+# define DSI_HS_CLT0_CPREP_MASK VC4_MASK(8, 0) -+# define DSI_HS_CLT0_CPREP_SHIFT 0 -+ -+#define DSI1_HS_CLT1 0x54 -+# define DSI_HS_CLT1_CTRAIL_MASK VC4_MASK(17, 9) -+# define DSI_HS_CLT1_CTRAIL_SHIFT 9 -+# define DSI_HS_CLT1_CPOST_MASK VC4_MASK(8, 0) -+# define DSI_HS_CLT1_CPOST_SHIFT 0 -+ -+#define DSI1_HS_CLT2 0x58 -+# define DSI_HS_CLT2_WUP_MASK VC4_MASK(23, 0) -+# define DSI_HS_CLT2_WUP_SHIFT 0 -+ -+#define DSI1_HS_DLT3 0x5c -+# define DSI_HS_DLT3_EXIT_MASK VC4_MASK(26, 18) -+# define DSI_HS_DLT3_EXIT_SHIFT 18 -+# define DSI_HS_DLT3_ZERO_MASK VC4_MASK(17, 9) -+# define DSI_HS_DLT3_ZERO_SHIFT 9 -+# define DSI_HS_DLT3_PRE_MASK VC4_MASK(8, 0) -+# define DSI_HS_DLT3_PRE_SHIFT 0 -+ -+#define DSI1_HS_DLT4 0x60 -+# define DSI_HS_DLT4_ANLAT_MASK VC4_MASK(22, 18) -+# define DSI_HS_DLT4_ANLAT_SHIFT 18 -+# define DSI_HS_DLT4_TRAIL_MASK VC4_MASK(17, 9) -+# define DSI_HS_DLT4_TRAIL_SHIFT 9 -+# define DSI_HS_DLT4_LPX_MASK VC4_MASK(8, 0) -+# define DSI_HS_DLT4_LPX_SHIFT 0 -+ -+#define DSI1_HS_DLT5 0x64 -+# define DSI_HS_DLT5_INIT_MASK VC4_MASK(23, 0) -+# define DSI_HS_DLT5_INIT_SHIFT 0 -+ -+#define DSI1_HS_DLT6 0x68 -+# define DSI_HS_DLT6_TA_GET_MASK VC4_MASK(31, 24) -+# define DSI_HS_DLT6_TA_GET_SHIFT 24 -+# define DSI_HS_DLT6_TA_SURE_MASK VC4_MASK(23, 16) -+# define DSI_HS_DLT6_TA_SURE_SHIFT 16 -+# define DSI_HS_DLT6_TA_GO_MASK VC4_MASK(15, 8) -+# define DSI_HS_DLT6_TA_GO_SHIFT 8 -+# define DSI_HS_DLT6_LP_LPX_MASK VC4_MASK(7, 0) -+# define DSI_HS_DLT6_LP_LPX_SHIFT 0 -+ -+#define DSI1_HS_DLT7 0x6c -+# define DSI_HS_DLT7_LP_WUP_MASK VC4_MASK(23, 0) -+# define DSI_HS_DLT7_LP_WUP_SHIFT 0 -+ -+#define DSI1_PHY_AFEC0 0x70 -+ -+#define DSI1_PHY_AFEC1 0x74 -+# define DSI1_PHY_AFEC1_ACTRL_DLANE3_MASK VC4_MASK(19, 16) -+# define DSI1_PHY_AFEC1_ACTRL_DLANE3_SHIFT 16 -+# define DSI1_PHY_AFEC1_ACTRL_DLANE2_MASK VC4_MASK(15, 12) -+# define DSI1_PHY_AFEC1_ACTRL_DLANE2_SHIFT 12 -+# define DSI1_PHY_AFEC1_ACTRL_DLANE1_MASK VC4_MASK(11, 8) -+# define DSI1_PHY_AFEC1_ACTRL_DLANE1_SHIFT 8 -+# define DSI1_PHY_AFEC1_ACTRL_DLANE0_MASK VC4_MASK(7, 4) -+# define DSI1_PHY_AFEC1_ACTRL_DLANE0_SHIFT 4 -+# define DSI1_PHY_AFEC1_ACTRL_CLANE_MASK VC4_MASK(3, 0) -+# define DSI1_PHY_AFEC1_ACTRL_CLANE_SHIFT 0 -+ -+#define DSI1_TST_SEL 0x78 -+#define DSI1_TST_MON 0x7c -+#define DSI1_PHY_TST1 0x80 -+#define DSI1_PHY_TST2 0x84 -+#define DSI1_PHY_FIFO_STAT 0x88 -+/* Actually, all registers in the range that aren't otherwise claimed -+ * will return the ID. -+ */ -+#define DSI1_ID 0x8c -+ -+/* General DSI hardware state. */ -+struct vc4_dsi { -+ struct platform_device *pdev; -+ -+ struct mipi_dsi_host dsi_host; -+ struct drm_encoder *encoder; -+ struct drm_connector *connector; -+ struct drm_panel *panel; -+ -+ void __iomem *regs; -+ -+ struct dma_chan *reg_dma_chan; -+ dma_addr_t reg_dma_paddr; -+ u32 *reg_dma_mem; -+ dma_addr_t reg_paddr; -+ -+ /* Whether we're on bcm2835's DSI0 or DSI1. */ -+ int port; -+ -+ /* DSI channel for the panel we're connected to. */ -+ u32 channel; -+ u32 lanes; -+ enum mipi_dsi_pixel_format format; -+ u32 mode_flags; -+ -+ /* Input clock from CPRMAN to the digital PHY, for the DSI -+ * escape clock. -+ */ -+ struct clk *escape_clock; -+ -+ /* Input clock to the analog PHY, used to generate the DSI bit -+ * clock. -+ */ -+ struct clk *pll_phy_clock; -+ -+ /* HS Clocks generated within the DSI analog PHY. */ -+ struct clk_fixed_factor phy_clocks[3]; -+ -+ struct clk_onecell_data clk_onecell; -+ -+ /* Pixel clock output to the pixelvalve, generated from the HS -+ * clock. -+ */ -+ struct clk *pixel_clock; -+ -+ struct completion xfer_completion; -+ int xfer_result; -+}; -+ -+#define host_to_dsi(host) container_of(host, struct vc4_dsi, dsi_host) -+ -+static inline void -+dsi_dma_workaround_write(struct vc4_dsi *dsi, u32 offset, u32 val) -+{ -+ struct dma_chan *chan = dsi->reg_dma_chan; -+ struct dma_async_tx_descriptor *tx; -+ dma_cookie_t cookie; -+ int ret; -+ -+ /* DSI0 should be able to write normally. */ -+ if (!chan) { -+ writel(val, dsi->regs + offset); -+ return; -+ } -+ -+ *dsi->reg_dma_mem = val; -+ -+ tx = chan->device->device_prep_dma_memcpy(chan, -+ dsi->reg_paddr + offset, -+ dsi->reg_dma_paddr, -+ 4, 0); -+ if (!tx) { -+ DRM_ERROR("Failed to set up DMA register write\n"); -+ return; -+ } -+ -+ cookie = tx->tx_submit(tx); -+ ret = dma_submit_error(cookie); -+ if (ret) { -+ DRM_ERROR("Failed to submit DMA: %d\n", ret); -+ return; -+ } -+ ret = dma_sync_wait(chan, cookie); -+ if (ret) -+ DRM_ERROR("Failed to wait for DMA: %d\n", ret); -+} -+ -+#define DSI_READ(offset) readl(dsi->regs + (offset)) -+#define DSI_WRITE(offset, val) dsi_dma_workaround_write(dsi, offset, val) -+#define DSI_PORT_READ(offset) \ -+ DSI_READ(dsi->port ? DSI1_##offset : DSI0_##offset) -+#define DSI_PORT_WRITE(offset, val) \ -+ DSI_WRITE(dsi->port ? DSI1_##offset : DSI0_##offset, val) -+#define DSI_PORT_BIT(bit) (dsi->port ? DSI1_##bit : DSI0_##bit) -+ -+/* VC4 DSI encoder KMS struct */ -+struct vc4_dsi_encoder { -+ struct vc4_encoder base; -+ struct vc4_dsi *dsi; -+}; -+ -+static inline struct vc4_dsi_encoder * -+to_vc4_dsi_encoder(struct drm_encoder *encoder) -+{ -+ return container_of(encoder, struct vc4_dsi_encoder, base.base); -+} -+ -+/* VC4 DSI connector KMS struct */ -+struct vc4_dsi_connector { -+ struct drm_connector base; -+ struct vc4_dsi *dsi; -+}; -+ -+static inline struct vc4_dsi_connector * -+to_vc4_dsi_connector(struct drm_connector *connector) -+{ -+ return container_of(connector, struct vc4_dsi_connector, base); -+} -+ -+#define DSI_REG(reg) { reg, #reg } -+static const struct { -+ u32 reg; -+ const char *name; -+} dsi0_regs[] = { -+ DSI_REG(DSI0_CTRL), -+ DSI_REG(DSI0_STAT), -+ DSI_REG(DSI0_HSTX_TO_CNT), -+ DSI_REG(DSI0_LPRX_TO_CNT), -+ DSI_REG(DSI0_TA_TO_CNT), -+ DSI_REG(DSI0_PR_TO_CNT), -+ DSI_REG(DSI0_DISP0_CTRL), -+ DSI_REG(DSI0_DISP1_CTRL), -+ DSI_REG(DSI0_INT_STAT), -+ DSI_REG(DSI0_INT_EN), -+ DSI_REG(DSI0_PHYC), -+ DSI_REG(DSI0_HS_CLT0), -+ DSI_REG(DSI0_HS_CLT1), -+ DSI_REG(DSI0_HS_CLT2), -+ DSI_REG(DSI0_HS_DLT3), -+ DSI_REG(DSI0_HS_DLT4), -+ DSI_REG(DSI0_HS_DLT5), -+ DSI_REG(DSI0_HS_DLT6), -+ DSI_REG(DSI0_HS_DLT7), -+ DSI_REG(DSI0_PHY_AFEC0), -+ DSI_REG(DSI0_PHY_AFEC1), -+ DSI_REG(DSI0_ID), -+}; -+ -+static const struct { -+ u32 reg; -+ const char *name; -+} dsi1_regs[] = { -+ DSI_REG(DSI1_CTRL), -+ DSI_REG(DSI1_STAT), -+ DSI_REG(DSI1_HSTX_TO_CNT), -+ DSI_REG(DSI1_LPRX_TO_CNT), -+ DSI_REG(DSI1_TA_TO_CNT), -+ DSI_REG(DSI1_PR_TO_CNT), -+ DSI_REG(DSI1_DISP0_CTRL), -+ DSI_REG(DSI1_DISP1_CTRL), -+ DSI_REG(DSI1_INT_STAT), -+ DSI_REG(DSI1_INT_EN), -+ DSI_REG(DSI1_PHYC), -+ DSI_REG(DSI1_HS_CLT0), -+ DSI_REG(DSI1_HS_CLT1), -+ DSI_REG(DSI1_HS_CLT2), -+ DSI_REG(DSI1_HS_DLT3), -+ DSI_REG(DSI1_HS_DLT4), -+ DSI_REG(DSI1_HS_DLT5), -+ DSI_REG(DSI1_HS_DLT6), -+ DSI_REG(DSI1_HS_DLT7), -+ DSI_REG(DSI1_PHY_AFEC0), -+ DSI_REG(DSI1_PHY_AFEC1), -+ DSI_REG(DSI1_ID), -+}; -+ -+static void vc4_dsi_dump_regs(struct vc4_dsi *dsi) -+{ -+ int i; -+ -+ if (dsi->port == 0) { -+ for (i = 0; i < ARRAY_SIZE(dsi0_regs); i++) { -+ DRM_INFO("0x%04x (%s): 0x%08x\n", -+ dsi0_regs[i].reg, dsi0_regs[i].name, -+ DSI_READ(dsi0_regs[i].reg)); -+ } -+ } else { -+ for (i = 0; i < ARRAY_SIZE(dsi1_regs); i++) { -+ DRM_INFO("0x%04x (%s): 0x%08x\n", -+ dsi1_regs[i].reg, dsi1_regs[i].name, -+ DSI_READ(dsi1_regs[i].reg)); -+ } -+ } -+} -+ -+#ifdef CONFIG_DEBUG_FS -+int vc4_dsi_debugfs_regs(struct seq_file *m, void *unused) -+{ -+ struct drm_info_node *node = (struct drm_info_node *)m->private; -+ struct drm_device *drm = node->minor->dev; -+ struct vc4_dev *vc4 = to_vc4_dev(drm); -+ int dsi_index = (uintptr_t)node->info_ent->data; -+ struct vc4_dsi *dsi = (dsi_index == 1 ? vc4->dsi1 : NULL); -+ int i; -+ -+ if (!dsi) -+ return 0; -+ -+ if (dsi->port == 0) { -+ for (i = 0; i < ARRAY_SIZE(dsi0_regs); i++) { -+ seq_printf(m, "0x%04x (%s): 0x%08x\n", -+ dsi0_regs[i].reg, dsi0_regs[i].name, -+ DSI_READ(dsi0_regs[i].reg)); -+ } -+ } else { -+ for (i = 0; i < ARRAY_SIZE(dsi1_regs); i++) { -+ seq_printf(m, "0x%04x (%s): 0x%08x\n", -+ dsi1_regs[i].reg, dsi1_regs[i].name, -+ DSI_READ(dsi1_regs[i].reg)); -+ } -+ } -+ -+ return 0; -+} -+#endif -+ -+static enum drm_connector_status -+vc4_dsi_connector_detect(struct drm_connector *connector, bool force) -+{ -+ struct vc4_dsi_connector *vc4_connector = -+ to_vc4_dsi_connector(connector); -+ struct vc4_dsi *dsi = vc4_connector->dsi; -+ -+ if (dsi->panel) -+ return connector_status_connected; -+ else -+ return connector_status_disconnected; -+} -+ -+static void vc4_dsi_connector_destroy(struct drm_connector *connector) -+{ -+ drm_connector_unregister(connector); -+ drm_connector_cleanup(connector); -+} -+ -+static int vc4_dsi_connector_get_modes(struct drm_connector *connector) -+{ -+ struct vc4_dsi_connector *vc4_connector = -+ to_vc4_dsi_connector(connector); -+ struct vc4_dsi *dsi = vc4_connector->dsi; -+ -+ if (dsi->panel) -+ return drm_panel_get_modes(dsi->panel); -+ -+ return 0; -+} -+ -+static const struct drm_connector_funcs vc4_dsi_connector_funcs = { -+ .dpms = drm_atomic_helper_connector_dpms, -+ .detect = vc4_dsi_connector_detect, -+ .fill_modes = drm_helper_probe_single_connector_modes, -+ .destroy = vc4_dsi_connector_destroy, -+ .reset = drm_atomic_helper_connector_reset, -+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, -+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -+}; -+ -+static const struct drm_connector_helper_funcs vc4_dsi_connector_helper_funcs = { -+ .get_modes = vc4_dsi_connector_get_modes, -+}; -+ -+static struct drm_connector *vc4_dsi_connector_init(struct drm_device *dev, -+ struct vc4_dsi *dsi) -+{ -+ struct drm_connector *connector = NULL; -+ struct vc4_dsi_connector *dsi_connector; -+ int ret = 0; -+ -+ dsi_connector = devm_kzalloc(dev->dev, sizeof(*dsi_connector), -+ GFP_KERNEL); -+ if (!dsi_connector) { -+ ret = -ENOMEM; -+ goto fail; -+ } -+ connector = &dsi_connector->base; -+ -+ dsi_connector->dsi = dsi; -+ -+ drm_connector_init(dev, connector, &vc4_dsi_connector_funcs, -+ DRM_MODE_CONNECTOR_DSI); -+ drm_connector_helper_add(connector, &vc4_dsi_connector_helper_funcs); -+ -+ connector->polled = 0; -+ connector->interlace_allowed = 0; -+ connector->doublescan_allowed = 0; -+ -+ drm_mode_connector_attach_encoder(connector, dsi->encoder); -+ -+ return connector; -+ -+fail: -+ if (connector) -+ vc4_dsi_connector_destroy(connector); -+ -+ return ERR_PTR(ret); -+} -+ -+static void vc4_dsi_encoder_destroy(struct drm_encoder *encoder) -+{ -+ drm_encoder_cleanup(encoder); -+} -+ -+static const struct drm_encoder_funcs vc4_dsi_encoder_funcs = { -+ .destroy = vc4_dsi_encoder_destroy, -+}; -+ -+static void vc4_dsi_latch_ulps(struct vc4_dsi *dsi, bool latch) -+{ -+ u32 afec0 = DSI_PORT_READ(PHY_AFEC0); -+ -+ if (latch) -+ afec0 |= DSI_PORT_BIT(PHY_AFEC0_LATCH_ULPS); -+ else -+ afec0 &= ~DSI_PORT_BIT(PHY_AFEC0_LATCH_ULPS); -+ -+ DSI_PORT_WRITE(PHY_AFEC0, afec0); -+} -+ -+/* Enters or exits Ultra Low Power State. */ -+static void vc4_dsi_ulps(struct vc4_dsi *dsi, bool ulps) -+{ -+ bool continuous = dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS; -+ u32 phyc_ulps = ((continuous ? DSI_PORT_BIT(PHYC_CLANE_ULPS) : 0) | -+ DSI_PHYC_DLANE0_ULPS | -+ (dsi->lanes > 1 ? DSI_PHYC_DLANE1_ULPS : 0) | -+ (dsi->lanes > 2 ? DSI_PHYC_DLANE2_ULPS : 0) | -+ (dsi->lanes > 3 ? DSI_PHYC_DLANE3_ULPS : 0)); -+ u32 stat_ulps = ((continuous ? DSI1_STAT_PHY_CLOCK_ULPS : 0) | -+ DSI1_STAT_PHY_D0_ULPS | -+ (dsi->lanes > 1 ? DSI1_STAT_PHY_D1_ULPS : 0) | -+ (dsi->lanes > 2 ? DSI1_STAT_PHY_D2_ULPS : 0) | -+ (dsi->lanes > 3 ? DSI1_STAT_PHY_D3_ULPS : 0)); -+ u32 stat_stop = ((continuous ? DSI1_STAT_PHY_CLOCK_STOP : 0) | -+ DSI1_STAT_PHY_D0_STOP | -+ (dsi->lanes > 1 ? DSI1_STAT_PHY_D1_STOP : 0) | -+ (dsi->lanes > 2 ? DSI1_STAT_PHY_D2_STOP : 0) | -+ (dsi->lanes > 3 ? DSI1_STAT_PHY_D3_STOP : 0)); -+ int ret; -+ -+ DSI_PORT_WRITE(STAT, stat_ulps); -+ DSI_PORT_WRITE(PHYC, DSI_PORT_READ(PHYC) | phyc_ulps); -+ ret = wait_for((DSI_PORT_READ(STAT) & stat_ulps) == stat_ulps, 200); -+ if (ret) { -+ dev_warn(&dsi->pdev->dev, -+ "Timeout waiting for DSI ULPS entry: STAT 0x%08x", -+ DSI_PORT_READ(STAT)); -+ DSI_PORT_WRITE(PHYC, DSI_PORT_READ(PHYC) & ~phyc_ulps); -+ vc4_dsi_latch_ulps(dsi, false); -+ return; -+ } -+ -+ /* The DSI module can't be disabled while the module is -+ * generating ULPS state. So, to be able to disable the -+ * module, we have the AFE latch the ULPS state and continue -+ * on to having the module enter STOP. -+ */ -+ vc4_dsi_latch_ulps(dsi, ulps); -+ -+ DSI_PORT_WRITE(STAT, stat_stop); -+ DSI_PORT_WRITE(PHYC, DSI_PORT_READ(PHYC) & ~phyc_ulps); -+ ret = wait_for((DSI_PORT_READ(STAT) & stat_stop) == stat_stop, 200); -+ if (ret) { -+ dev_warn(&dsi->pdev->dev, -+ "Timeout waiting for DSI STOP entry: STAT 0x%08x", -+ DSI_PORT_READ(STAT)); -+ DSI_PORT_WRITE(PHYC, DSI_PORT_READ(PHYC) & ~phyc_ulps); -+ return; -+ } -+} -+ -+static u32 -+dsi_hs_timing(u32 ui_ns, u32 ns, u32 ui) -+{ -+ /* The HS timings have to be rounded up to a multiple of 8 -+ * because we're using the byte clock. -+ */ -+ return roundup(ui + DIV_ROUND_UP(ns, ui_ns), 8); -+} -+ -+/* ESC always runs at 100Mhz. */ -+#define ESC_TIME_NS 10 -+ -+static u32 -+dsi_esc_timing(u32 ns) -+{ -+ return DIV_ROUND_UP(ns, ESC_TIME_NS); -+} -+ -+static void vc4_dsi_encoder_disable(struct drm_encoder *encoder) -+{ -+ struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder); -+ struct vc4_dsi *dsi = vc4_encoder->dsi; -+ struct device *dev = &dsi->pdev->dev; -+ -+ drm_panel_disable(dsi->panel); -+ -+ vc4_dsi_ulps(dsi, true); -+ -+ drm_panel_unprepare(dsi->panel); -+ -+ clk_disable_unprepare(dsi->pll_phy_clock); -+ clk_disable_unprepare(dsi->escape_clock); -+ clk_disable_unprepare(dsi->pixel_clock); -+ -+ pm_runtime_put(dev); -+} -+ -+static void vc4_dsi_encoder_enable(struct drm_encoder *encoder) -+{ -+ struct drm_display_mode *mode = &encoder->crtc->mode; -+ struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder); -+ struct vc4_dsi *dsi = vc4_encoder->dsi; -+ struct device *dev = &dsi->pdev->dev; -+ u32 format = 0, divider = 0; -+ bool debug_dump_regs = false; -+ unsigned long hs_clock; -+ u32 ui_ns; -+ /* Minimum LP state duration in escape clock cycles. */ -+ u32 lpx = dsi_esc_timing(60); -+ unsigned long pixel_clock_hz = mode->clock * 1000; -+ unsigned long dsip_clock; -+ unsigned long phy_clock; -+ int ret; -+ -+ ret = pm_runtime_get_sync(dev); -+ if (ret) { -+ DRM_ERROR("Failed to runtime PM enable on DSI%d\n", dsi->port); -+ return; -+ } -+ -+ ret = drm_panel_prepare(dsi->panel); -+ if (ret) { -+ DRM_ERROR("Panel failed to prepare\n"); -+ return; -+ } -+ -+ if (debug_dump_regs) { -+ DRM_INFO("DSI regs before:\n"); -+ vc4_dsi_dump_regs(dsi); -+ } -+ -+ switch (dsi->format) { -+ case MIPI_DSI_FMT_RGB888: -+ format = DSI_PFORMAT_RGB888; -+ divider = 24 / dsi->lanes; -+ break; -+ case MIPI_DSI_FMT_RGB666: -+ format = DSI_PFORMAT_RGB666; -+ divider = 24 / dsi->lanes; -+ break; -+ case MIPI_DSI_FMT_RGB666_PACKED: -+ format = DSI_PFORMAT_RGB666_PACKED; -+ divider = 18 / dsi->lanes; -+ break; -+ case MIPI_DSI_FMT_RGB565: -+ format = DSI_PFORMAT_RGB565; -+ divider = 16 / dsi->lanes; -+ break; -+ } -+ -+ phy_clock = pixel_clock_hz * divider; -+ ret = clk_set_rate(dsi->pll_phy_clock, phy_clock); -+ if (ret) { -+ dev_err(&dsi->pdev->dev, -+ "Failed to set phy clock to %ld: %d\n", phy_clock, ret); -+ } -+ -+ /* Reset the DSI and all its fifos. */ -+ DSI_PORT_WRITE(CTRL, -+ DSI_CTRL_SOFT_RESET_CFG | -+ DSI_PORT_BIT(CTRL_RESET_FIFOS)); -+ -+ DSI_PORT_WRITE(CTRL, -+ DSI_CTRL_HSDT_EOT_DISABLE | -+ DSI_CTRL_RX_LPDT_EOT_DISABLE); -+ -+ /* Clear all stat bits so we see what has happened during enable. */ -+ DSI_PORT_WRITE(STAT, DSI_PORT_READ(STAT)); -+ -+ /* Set AFE CTR00/CTR1 to release powerdown of analog. */ -+ if (dsi->port == 0) { -+ u32 afec0 = (VC4_SET_FIELD(7, DSI_PHY_AFEC0_PTATADJ) | -+ VC4_SET_FIELD(7, DSI_PHY_AFEC0_CTATADJ)); -+ -+ if (dsi->lanes < 2) -+ afec0 |= DSI0_PHY_AFEC0_PD_DLANE1; -+ -+ if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO)) -+ afec0 |= DSI0_PHY_AFEC0_RESET; -+ -+ DSI_PORT_WRITE(PHY_AFEC0, afec0); -+ -+ DSI_PORT_WRITE(PHY_AFEC1, -+ VC4_SET_FIELD(6, DSI0_PHY_AFEC1_IDR_DLANE1) | -+ VC4_SET_FIELD(6, DSI0_PHY_AFEC1_IDR_DLANE0) | -+ VC4_SET_FIELD(6, DSI0_PHY_AFEC1_IDR_CLANE)); -+ } else { -+ u32 afec0 = (VC4_SET_FIELD(7, DSI_PHY_AFEC0_PTATADJ) | -+ VC4_SET_FIELD(7, DSI_PHY_AFEC0_CTATADJ) | -+ VC4_SET_FIELD(6, DSI1_PHY_AFEC0_IDR_CLANE) | -+ VC4_SET_FIELD(6, DSI1_PHY_AFEC0_IDR_DLANE0) | -+ VC4_SET_FIELD(6, DSI1_PHY_AFEC0_IDR_DLANE1) | -+ VC4_SET_FIELD(6, DSI1_PHY_AFEC0_IDR_DLANE2) | -+ VC4_SET_FIELD(6, DSI1_PHY_AFEC0_IDR_DLANE3)); -+ -+ if (dsi->lanes < 4) -+ afec0 |= DSI1_PHY_AFEC0_PD_DLANE3; -+ if (dsi->lanes < 3) -+ afec0 |= DSI1_PHY_AFEC0_PD_DLANE2; -+ if (dsi->lanes < 2) -+ afec0 |= DSI1_PHY_AFEC0_PD_DLANE1; -+ -+ afec0 |= DSI1_PHY_AFEC0_RESET; -+ -+ DSI_PORT_WRITE(PHY_AFEC0, afec0); -+ -+ DSI_PORT_WRITE(PHY_AFEC1, 0); -+ -+ /* AFEC reset hold time */ -+ mdelay(1); -+ } -+ -+ ret = clk_prepare_enable(dsi->escape_clock); -+ if (ret) { -+ DRM_ERROR("Failed to turn on DSI escape clock: %d\n", ret); -+ return; -+ } -+ -+ ret = clk_prepare_enable(dsi->pll_phy_clock); -+ if (ret) { -+ DRM_ERROR("Failed to turn on DSI PLL: %d\n", ret); -+ return; -+ } -+ -+ hs_clock = clk_get_rate(dsi->pll_phy_clock); -+ -+ /* Yes, we set the DSI0P/DSI1P pixel clock to the byte rate, -+ * not the pixel clock rate. DSIxP take from the APHY's byte, -+ * DDR2, or DDR4 clock (we use byte) and feed into the PV at -+ * that rate. Separately, a value derived from PIX_CLK_DIV -+ * and HS_CLKC is fed into the PV to divide down to the actual -+ * pixel clock for pushing pixels into DSI. -+ */ -+ dsip_clock = phy_clock / 8; -+ ret = clk_set_rate(dsi->pixel_clock, dsip_clock); -+ if (ret) { -+ dev_err(dev, "Failed to set pixel clock to %ldHz: %d\n", -+ dsip_clock, ret); -+ } -+ -+ ret = clk_prepare_enable(dsi->pixel_clock); -+ if (ret) { -+ DRM_ERROR("Failed to turn on DSI pixel clock: %d\n", ret); -+ return; -+ } -+ -+ /* How many ns one DSI unit interval is. Note that the clock -+ * is DDR, so there's an extra divide by 2. -+ */ -+ ui_ns = DIV_ROUND_UP(500000000, hs_clock); -+ -+ DSI_PORT_WRITE(HS_CLT0, -+ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 262, 0), -+ DSI_HS_CLT0_CZERO) | -+ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 0, 8), -+ DSI_HS_CLT0_CPRE) | -+ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 38, 0), -+ DSI_HS_CLT0_CPREP)); -+ -+ DSI_PORT_WRITE(HS_CLT1, -+ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 60, 0), -+ DSI_HS_CLT1_CTRAIL) | -+ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 60, 52), -+ DSI_HS_CLT1_CPOST)); -+ -+ DSI_PORT_WRITE(HS_CLT2, -+ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 1000000, 0), -+ DSI_HS_CLT2_WUP)); -+ -+ DSI_PORT_WRITE(HS_DLT3, -+ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 100, 0), -+ DSI_HS_DLT3_EXIT) | -+ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 105, 6), -+ DSI_HS_DLT3_ZERO) | -+ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 40, 4), -+ DSI_HS_DLT3_PRE)); -+ -+ DSI_PORT_WRITE(HS_DLT4, -+ VC4_SET_FIELD(dsi_hs_timing(ui_ns, lpx * ESC_TIME_NS, 0), -+ DSI_HS_DLT4_LPX) | -+ VC4_SET_FIELD(max(dsi_hs_timing(ui_ns, 0, 8), -+ dsi_hs_timing(ui_ns, 60, 4)), -+ DSI_HS_DLT4_TRAIL) | -+ VC4_SET_FIELD(0, DSI_HS_DLT4_ANLAT)); -+ -+ DSI_PORT_WRITE(HS_DLT5, VC4_SET_FIELD(dsi_hs_timing(ui_ns, 1000, 5000), -+ DSI_HS_DLT5_INIT)); -+ -+ DSI_PORT_WRITE(HS_DLT6, -+ VC4_SET_FIELD(lpx * 5, DSI_HS_DLT6_TA_GET) | -+ VC4_SET_FIELD(lpx, DSI_HS_DLT6_TA_SURE) | -+ VC4_SET_FIELD(lpx * 4, DSI_HS_DLT6_TA_GO) | -+ VC4_SET_FIELD(lpx, DSI_HS_DLT6_LP_LPX)); -+ -+ DSI_PORT_WRITE(HS_DLT7, -+ VC4_SET_FIELD(dsi_esc_timing(1000000), -+ DSI_HS_DLT7_LP_WUP)); -+ -+ DSI_PORT_WRITE(PHYC, -+ DSI_PHYC_DLANE0_ENABLE | -+ (dsi->lanes >= 2 ? DSI_PHYC_DLANE1_ENABLE : 0) | -+ (dsi->lanes >= 3 ? DSI_PHYC_DLANE2_ENABLE : 0) | -+ (dsi->lanes >= 4 ? DSI_PHYC_DLANE3_ENABLE : 0) | -+ DSI_PORT_BIT(PHYC_CLANE_ENABLE) | -+ ((dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) ? -+ 0 : DSI_PORT_BIT(PHYC_HS_CLK_CONTINUOUS)) | -+ (dsi->port == 0 ? -+ VC4_SET_FIELD(lpx - 1, DSI0_PHYC_ESC_CLK_LPDT) : -+ VC4_SET_FIELD(lpx - 1, DSI1_PHYC_ESC_CLK_LPDT))); -+ -+ DSI_PORT_WRITE(CTRL, -+ DSI_PORT_READ(CTRL) | -+ DSI_CTRL_CAL_BYTE); -+ -+ /* HS timeout in HS clock cycles: disabled. */ -+ DSI_PORT_WRITE(HSTX_TO_CNT, 0); -+ /* LP receive timeout in HS clocks. */ -+ DSI_PORT_WRITE(LPRX_TO_CNT, 0xffffff); -+ /* Bus turnaround timeout */ -+ DSI_PORT_WRITE(TA_TO_CNT, 100000); -+ /* Display reset sequence timeout */ -+ DSI_PORT_WRITE(PR_TO_CNT, 100000); -+ -+ if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { -+ DSI_PORT_WRITE(DISP0_CTRL, -+ VC4_SET_FIELD(divider, DSI_DISP0_PIX_CLK_DIV) | -+ VC4_SET_FIELD(format, DSI_DISP0_PFORMAT) | -+ VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME, -+ DSI_DISP0_LP_STOP_CTRL) | -+ DSI_DISP0_ST_END | -+ DSI_DISP0_ENABLE); -+ } else { -+ DSI_PORT_WRITE(DISP0_CTRL, -+ DSI_DISP0_COMMAND_MODE | -+ DSI_DISP0_ENABLE); -+ } -+ -+ /* Set up DISP1 for transferring long command payloads through -+ * the pixfifo. -+ */ -+ DSI_PORT_WRITE(DISP1_CTRL, -+ VC4_SET_FIELD(DSI_DISP1_PFORMAT_32BIT_LE, -+ DSI_DISP1_PFORMAT) | -+ DSI_DISP1_ENABLE); -+ -+ /* Ungate the block. */ -+ if (dsi->port == 0) -+ DSI_PORT_WRITE(CTRL, DSI_PORT_READ(CTRL) | DSI0_CTRL_CTRL0); -+ else -+ DSI_PORT_WRITE(CTRL, DSI_PORT_READ(CTRL) | DSI1_CTRL_EN); -+ -+ /* Bring AFE out of reset. */ -+ if (dsi->port == 0) { -+ } else { -+ DSI_PORT_WRITE(PHY_AFEC0, -+ DSI_PORT_READ(PHY_AFEC0) & -+ ~DSI1_PHY_AFEC0_RESET); -+ } -+ -+ vc4_dsi_ulps(dsi, false); -+ -+ if (debug_dump_regs) { -+ DRM_INFO("DSI regs after:\n"); -+ vc4_dsi_dump_regs(dsi); -+ } -+ -+ ret = drm_panel_enable(dsi->panel); -+ if (ret) { -+ DRM_ERROR("Panel failed to enable\n"); -+ drm_panel_unprepare(dsi->panel); -+ return; -+ } -+} -+ -+static ssize_t vc4_dsi_host_transfer(struct mipi_dsi_host *host, -+ const struct mipi_dsi_msg *msg) -+{ -+ struct vc4_dsi *dsi = host_to_dsi(host); -+ struct mipi_dsi_packet packet; -+ u32 pkth = 0, pktc = 0; -+ int i, ret; -+ bool is_long = mipi_dsi_packet_format_is_long(msg->type); -+ u32 cmd_fifo_len = 0, pix_fifo_len = 0; -+ -+ mipi_dsi_create_packet(&packet, msg); -+ -+ pkth |= VC4_SET_FIELD(packet.header[0], DSI_TXPKT1H_BC_DT); -+ pkth |= VC4_SET_FIELD(packet.header[1] | -+ (packet.header[2] << 8), -+ DSI_TXPKT1H_BC_PARAM); -+ if (is_long) { -+ /* Divide data across the various FIFOs we have available. -+ * The command FIFO takes byte-oriented data, but is of -+ * limited size. The pixel FIFO (never actually used for -+ * pixel data in reality) is word oriented, and substantially -+ * larger. So, we use the pixel FIFO for most of the data, -+ * sending the residual bytes in the command FIFO at the start. -+ * -+ * With this arrangement, the command FIFO will never get full. -+ */ -+ if (packet.payload_length <= 16) { -+ cmd_fifo_len = packet.payload_length; -+ pix_fifo_len = 0; -+ } else { -+ cmd_fifo_len = (packet.payload_length % -+ DSI_PIX_FIFO_WIDTH); -+ pix_fifo_len = ((packet.payload_length - cmd_fifo_len) / -+ DSI_PIX_FIFO_WIDTH); -+ } -+ -+ WARN_ON_ONCE(pix_fifo_len >= DSI_PIX_FIFO_DEPTH); -+ -+ pkth |= VC4_SET_FIELD(cmd_fifo_len, DSI_TXPKT1H_BC_CMDFIFO); -+ } -+ -+ if (msg->rx_len) { -+ pktc |= VC4_SET_FIELD(DSI_TXPKT1C_CMD_CTRL_RX, -+ DSI_TXPKT1C_CMD_CTRL); -+ } else { -+ pktc |= VC4_SET_FIELD(DSI_TXPKT1C_CMD_CTRL_TX, -+ DSI_TXPKT1C_CMD_CTRL); -+ } -+ -+ for (i = 0; i < cmd_fifo_len; i++) -+ DSI_PORT_WRITE(TXPKT_CMD_FIFO, packet.payload[i]); -+ for (i = 0; i < pix_fifo_len; i++) { -+ const u8 *pix = packet.payload + cmd_fifo_len + i * 4; -+ -+ DSI_PORT_WRITE(TXPKT_PIX_FIFO, -+ pix[0] | -+ pix[1] << 8 | -+ pix[2] << 16 | -+ pix[3] << 24); -+ } -+ -+ if (msg->flags & MIPI_DSI_MSG_USE_LPM) -+ pktc |= DSI_TXPKT1C_CMD_MODE_LP; -+ if (is_long) -+ pktc |= DSI_TXPKT1C_CMD_TYPE_LONG; -+ -+ /* Send one copy of the packet. Larger repeats are used for pixel -+ * data in command mode. -+ */ -+ pktc |= VC4_SET_FIELD(1, DSI_TXPKT1C_CMD_REPEAT); -+ -+ pktc |= DSI_TXPKT1C_CMD_EN; -+ if (pix_fifo_len) { -+ pktc |= VC4_SET_FIELD(DSI_TXPKT1C_DISPLAY_NO_SECONDARY, -+ DSI_TXPKT1C_DISPLAY_NO); -+ } else { -+ pktc |= VC4_SET_FIELD(DSI_TXPKT1C_DISPLAY_NO_SHORT, -+ DSI_TXPKT1C_DISPLAY_NO); -+ } -+ -+ /* Enable the appropriate interrupt for the transfer completion. */ -+ dsi->xfer_result = 0; -+ reinit_completion(&dsi->xfer_completion); -+ DSI_PORT_WRITE(INT_STAT, DSI1_INT_TXPKT1_DONE | DSI1_INT_PHY_DIR_RTF); -+ if (msg->rx_len) { -+ DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED | -+ DSI1_INT_PHY_DIR_RTF)); -+ } else { -+ DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED | -+ DSI1_INT_TXPKT1_DONE)); -+ } -+ -+ /* Send the packet. */ -+ DSI_PORT_WRITE(TXPKT1H, pkth); -+ DSI_PORT_WRITE(TXPKT1C, pktc); -+ -+ if (!wait_for_completion_timeout(&dsi->xfer_completion, -+ msecs_to_jiffies(1000))) { -+ dev_err(&dsi->pdev->dev, "transfer interrupt wait timeout"); -+ dev_err(&dsi->pdev->dev, "instat: 0x%08x\n", -+ DSI_PORT_READ(INT_STAT)); -+ ret = -ETIMEDOUT; -+ } else { -+ ret = dsi->xfer_result; -+ } -+ -+ DSI_PORT_WRITE(INT_EN, DSI1_INTERRUPTS_ALWAYS_ENABLED); -+ -+ if (ret) -+ goto reset_fifo_and_return; -+ -+ if (ret == 0 && msg->rx_len) { -+ u32 rxpkt1h = DSI_PORT_READ(RXPKT1H); -+ u8 *msg_rx = msg->rx_buf; -+ -+ if (rxpkt1h & DSI_RXPKT1H_PKT_TYPE_LONG) { -+ u32 rxlen = VC4_GET_FIELD(rxpkt1h, -+ DSI_RXPKT1H_BC_PARAM); -+ -+ if (rxlen != msg->rx_len) { -+ DRM_ERROR("DSI returned %db, expecting %db\n", -+ rxlen, (int)msg->rx_len); -+ ret = -ENXIO; -+ goto reset_fifo_and_return; -+ } -+ -+ for (i = 0; i < msg->rx_len; i++) -+ msg_rx[i] = DSI_READ(DSI1_RXPKT_FIFO); -+ } else { -+ /* FINISHME: Handle AWER */ -+ -+ msg_rx[0] = VC4_GET_FIELD(rxpkt1h, -+ DSI_RXPKT1H_SHORT_0); -+ if (msg->rx_len > 1) { -+ msg_rx[1] = VC4_GET_FIELD(rxpkt1h, -+ DSI_RXPKT1H_SHORT_1); -+ } -+ } -+ } -+ -+ return ret; -+ -+reset_fifo_and_return: -+ DRM_ERROR("DSI transfer failed, resetting: %d\n", ret); -+ -+ DSI_PORT_WRITE(TXPKT1C, DSI_PORT_READ(TXPKT1C) & ~DSI_TXPKT1C_CMD_EN); -+ udelay(1); -+ DSI_PORT_WRITE(CTRL, -+ DSI_PORT_READ(CTRL) | -+ DSI_PORT_BIT(CTRL_RESET_FIFOS)); -+ -+ DSI_PORT_WRITE(TXPKT1C, 0); -+ DSI_PORT_WRITE(INT_EN, DSI1_INTERRUPTS_ALWAYS_ENABLED); -+ return ret; -+} -+ -+static int vc4_dsi_host_attach(struct mipi_dsi_host *host, -+ struct mipi_dsi_device *device) -+{ -+ struct vc4_dsi *dsi = host_to_dsi(host); -+ int ret = 0; -+ -+ dsi->lanes = device->lanes; -+ dsi->channel = device->channel; -+ dsi->format = device->format; -+ dsi->mode_flags = device->mode_flags; -+ -+ if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO)) { -+ dev_err(&dsi->pdev->dev, -+ "Only VIDEO mode panels supported currently.\n"); -+ return 0; -+ } -+ -+ dsi->panel = of_drm_find_panel(device->dev.of_node); -+ if (!dsi->panel) -+ return 0; -+ -+ ret = drm_panel_attach(dsi->panel, dsi->connector); -+ if (ret != 0) -+ return ret; -+ -+ drm_helper_hpd_irq_event(dsi->connector->dev); -+ -+ return 0; -+} -+ -+static int vc4_dsi_host_detach(struct mipi_dsi_host *host, -+ struct mipi_dsi_device *device) -+{ -+ struct vc4_dsi *dsi = host_to_dsi(host); -+ -+ if (dsi->panel) { -+ int ret = drm_panel_detach(dsi->panel); -+ -+ if (ret) -+ return ret; -+ -+ dsi->panel = NULL; -+ -+ drm_helper_hpd_irq_event(dsi->connector->dev); -+ } -+ -+ return 0; -+} -+ -+static const struct mipi_dsi_host_ops vc4_dsi_host_ops = { -+ .attach = vc4_dsi_host_attach, -+ .detach = vc4_dsi_host_detach, -+ .transfer = vc4_dsi_host_transfer, -+}; -+ -+static const struct drm_encoder_helper_funcs vc4_dsi_encoder_helper_funcs = { -+ .disable = vc4_dsi_encoder_disable, -+ .enable = vc4_dsi_encoder_enable, -+}; -+ -+static const struct of_device_id vc4_dsi_dt_match[] = { -+ { .compatible = "brcm,bcm2835-dsi1", (void *)(uintptr_t)1 }, -+ {} -+}; -+ -+static void dsi_handle_error(struct vc4_dsi *dsi, -+ irqreturn_t *ret, u32 stat, u32 bit, -+ const char *type) -+{ -+ if (!(stat & bit)) -+ return; -+ -+ DRM_ERROR("DSI%d: %s error\n", dsi->port, type); -+ *ret = IRQ_HANDLED; -+} -+ -+static irqreturn_t vc4_dsi_irq_handler(int irq, void *data) -+{ -+ struct vc4_dsi *dsi = data; -+ u32 stat = DSI_PORT_READ(INT_STAT); -+ irqreturn_t ret = IRQ_NONE; -+ -+ DSI_PORT_WRITE(INT_STAT, stat); -+ -+ dsi_handle_error(dsi, &ret, stat, -+ DSI1_INT_ERR_SYNC_ESC, "LPDT sync"); -+ dsi_handle_error(dsi, &ret, stat, -+ DSI1_INT_ERR_CONTROL, "data lane 0 sequence"); -+ dsi_handle_error(dsi, &ret, stat, -+ DSI1_INT_ERR_CONT_LP0, "LP0 contention"); -+ dsi_handle_error(dsi, &ret, stat, -+ DSI1_INT_ERR_CONT_LP1, "LP1 contention"); -+ dsi_handle_error(dsi, &ret, stat, -+ DSI1_INT_HSTX_TO, "HSTX timeout"); -+ dsi_handle_error(dsi, &ret, stat, -+ DSI1_INT_LPRX_TO, "LPRX timeout"); -+ dsi_handle_error(dsi, &ret, stat, -+ DSI1_INT_TA_TO, "turnaround timeout"); -+ dsi_handle_error(dsi, &ret, stat, -+ DSI1_INT_PR_TO, "peripheral reset timeout"); -+ -+ if (stat & (DSI1_INT_TXPKT1_DONE | DSI1_INT_PHY_DIR_RTF)) { -+ complete(&dsi->xfer_completion); -+ ret = IRQ_HANDLED; -+ } else if (stat & DSI1_INT_HSTX_TO) { -+ complete(&dsi->xfer_completion); -+ dsi->xfer_result = -ETIMEDOUT; -+ ret = IRQ_HANDLED; -+ } -+ -+ return ret; -+} -+ -+/** -+ * Exposes clocks generated by the analog PHY that are consumed by -+ * CPRMAN (clk-bcm2835.c). -+ */ -+static int -+vc4_dsi_init_phy_clocks(struct vc4_dsi *dsi) -+{ -+ struct device *dev = &dsi->pdev->dev; -+ const char *parent_name = __clk_get_name(dsi->pll_phy_clock); -+ static const struct { -+ const char *dsi0_name, *dsi1_name; -+ int div; -+ } phy_clocks[] = { -+ { "dsi0_byte", "dsi1_byte", 8 }, -+ { "dsi0_ddr2", "dsi1_ddr2", 4 }, -+ { "dsi0_ddr", "dsi1_ddr", 2 }, -+ }; -+ int i; -+ -+ dsi->clk_onecell.clk_num = ARRAY_SIZE(phy_clocks); -+ dsi->clk_onecell.clks = devm_kcalloc(dev, -+ dsi->clk_onecell.clk_num, -+ sizeof(*dsi->clk_onecell.clks), -+ GFP_KERNEL); -+ if (!dsi->clk_onecell.clks) -+ return -ENOMEM; -+ -+ for (i = 0; i < ARRAY_SIZE(phy_clocks); i++) { -+ struct clk_fixed_factor *fix = &dsi->phy_clocks[i]; -+ struct clk_init_data init; -+ struct clk *clk; -+ -+ /* We just use core fixed factor clock ops for the PHY -+ * clocks. The clocks are actually gated by the -+ * PHY_AFEC0_DDRCLK_EN bits, which we should be -+ * setting if we use the DDR/DDR2 clocks. However, -+ * vc4_dsi_encoder_enable() is setting up both AFEC0, -+ * setting both our parent DSI PLL's rate and this -+ * clock's rate, so it knows if DDR/DDR2 are going to -+ * be used and could enable the gates itself. -+ */ -+ fix->mult = 1; -+ fix->div = phy_clocks[i].div; -+ fix->hw.init = &init; -+ -+ memset(&init, 0, sizeof(init)); -+ init.parent_names = &parent_name; -+ init.num_parents = 1; -+ if (dsi->port == 1) -+ init.name = phy_clocks[i].dsi1_name; -+ else -+ init.name = phy_clocks[i].dsi0_name; -+ init.ops = &clk_fixed_factor_ops; -+ init.flags = CLK_IS_BASIC; -+ -+ clk = devm_clk_register(dev, &fix->hw); -+ if (IS_ERR(clk)) -+ return PTR_ERR(clk); -+ -+ dsi->clk_onecell.clks[i] = clk; -+ } -+ -+ return of_clk_add_provider(dev->of_node, -+ of_clk_src_onecell_get, -+ &dsi->clk_onecell); -+} -+ -+static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ struct drm_device *drm = dev_get_drvdata(master); -+ struct vc4_dev *vc4 = to_vc4_dev(drm); -+ struct vc4_dsi *dsi; -+ struct vc4_dsi_encoder *vc4_dsi_encoder; -+ const struct of_device_id *match; -+ dma_cap_mask_t dma_mask; -+ int ret; -+ -+ dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL); -+ if (!dsi) -+ return -ENOMEM; -+ -+ match = of_match_device(vc4_dsi_dt_match, dev); -+ if (!match) -+ return -ENODEV; -+ -+ dsi->port = (uintptr_t)match->data; -+ -+ vc4_dsi_encoder = devm_kzalloc(dev, sizeof(*vc4_dsi_encoder), -+ GFP_KERNEL); -+ if (!vc4_dsi_encoder) -+ return -ENOMEM; -+ vc4_dsi_encoder->base.type = VC4_ENCODER_TYPE_DSI1; -+ vc4_dsi_encoder->dsi = dsi; -+ dsi->encoder = &vc4_dsi_encoder->base.base; -+ -+ dsi->pdev = pdev; -+ dsi->regs = vc4_ioremap_regs(pdev, 0); -+ if (IS_ERR(dsi->regs)) -+ return PTR_ERR(dsi->regs); -+ -+ if (DSI_PORT_READ(ID) != DSI_ID_VALUE) { -+ dev_err(dev, "Port returned 0x%08x for ID instead of 0x%08x\n", -+ DSI_PORT_READ(ID), DSI_ID_VALUE); -+ return -ENODEV; -+ } -+ -+ /* DSI1 has a broken AXI slave that doesn't respond to writes -+ * from the ARM. It does handle writes from the DMA engine, -+ * so set up a channel for talking to it. -+ */ -+ if (dsi->port == 1) { -+ dsi->reg_dma_mem = dma_alloc_coherent(dev, 4, -+ &dsi->reg_dma_paddr, -+ GFP_KERNEL); -+ if (!dsi->reg_dma_mem) { -+ DRM_ERROR("Failed to get DMA memory\n"); -+ return -ENOMEM; -+ } -+ -+ dma_cap_zero(dma_mask); -+ dma_cap_set(DMA_MEMCPY, dma_mask); -+ dsi->reg_dma_chan = dma_request_chan_by_mask(&dma_mask); -+ if (IS_ERR(dsi->reg_dma_chan)) { -+ ret = PTR_ERR(dsi->reg_dma_chan); -+ if (ret != -EPROBE_DEFER) -+ DRM_ERROR("Failed to get DMA channel: %d\n", -+ ret); -+ return ret; -+ } -+ -+ /* Get the physical address of the device's registers. The -+ * struct resource for the regs gives us the bus address -+ * instead. -+ */ -+ dsi->reg_paddr = be32_to_cpup(of_get_address(dev->of_node, -+ 0, NULL, NULL)); -+ } -+ -+ init_completion(&dsi->xfer_completion); -+ /* At startup enable error-reporting interrupts and nothing else. */ -+ DSI_PORT_WRITE(INT_EN, DSI1_INTERRUPTS_ALWAYS_ENABLED); -+ /* Clear any existing interrupt state. */ -+ DSI_PORT_WRITE(INT_STAT, DSI_PORT_READ(INT_STAT)); -+ -+ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), -+ vc4_dsi_irq_handler, 0, "vc4 dsi", dsi); -+ if (ret) { -+ if (ret != -EPROBE_DEFER) -+ dev_err(dev, "Failed to get interrupt: %d\n", ret); -+ return ret; -+ } -+ -+ dsi->escape_clock = devm_clk_get(dev, "escape"); -+ if (IS_ERR(dsi->escape_clock)) { -+ ret = PTR_ERR(dsi->escape_clock); -+ if (ret != -EPROBE_DEFER) -+ dev_err(dev, "Failed to get escape clock: %d\n", ret); -+ return ret; -+ } -+ -+ dsi->pll_phy_clock = devm_clk_get(dev, "phy"); -+ if (IS_ERR(dsi->pll_phy_clock)) { -+ ret = PTR_ERR(dsi->pll_phy_clock); -+ if (ret != -EPROBE_DEFER) -+ dev_err(dev, "Failed to get phy clock: %d\n", ret); -+ return ret; -+ } -+ -+ dsi->pixel_clock = devm_clk_get(dev, "pixel"); -+ if (IS_ERR(dsi->pixel_clock)) { -+ ret = PTR_ERR(dsi->pixel_clock); -+ if (ret != -EPROBE_DEFER) -+ dev_err(dev, "Failed to get pixel clock: %d\n", ret); -+ return ret; -+ } -+ -+ /* The esc clock rate is supposed to always be 100Mhz. */ -+ ret = clk_set_rate(dsi->escape_clock, 100 * 1000000); -+ if (ret) { -+ dev_err(dev, "Failed to set esc clock: %d\n", ret); -+ return ret; -+ } -+ -+ ret = vc4_dsi_init_phy_clocks(dsi); -+ if (ret) -+ return ret; -+ -+ if (dsi->port == 1) -+ vc4->dsi1 = dsi; -+ -+ drm_encoder_init(drm, dsi->encoder, &vc4_dsi_encoder_funcs, -+ DRM_MODE_ENCODER_DSI, NULL); -+ drm_encoder_helper_add(dsi->encoder, &vc4_dsi_encoder_helper_funcs); -+ -+ dsi->connector = vc4_dsi_connector_init(drm, dsi); -+ if (IS_ERR(dsi->connector)) { -+ ret = PTR_ERR(dsi->connector); -+ goto err_destroy_encoder; -+ } -+ -+ dsi->dsi_host.ops = &vc4_dsi_host_ops; -+ dsi->dsi_host.dev = dev; -+ -+ mipi_dsi_host_register(&dsi->dsi_host); -+ -+ dev_set_drvdata(dev, dsi); -+ -+ pm_runtime_enable(dev); -+ -+ return 0; -+ -+err_destroy_encoder: -+ vc4_dsi_encoder_destroy(dsi->encoder); -+ -+ return ret; -+} -+ -+static void vc4_dsi_unbind(struct device *dev, struct device *master, -+ void *data) -+{ -+ struct drm_device *drm = dev_get_drvdata(master); -+ struct vc4_dev *vc4 = to_vc4_dev(drm); -+ struct vc4_dsi *dsi = dev_get_drvdata(dev); -+ -+ pm_runtime_disable(dev); -+ -+ vc4_dsi_connector_destroy(dsi->connector); -+ vc4_dsi_encoder_destroy(dsi->encoder); -+ -+ mipi_dsi_host_unregister(&dsi->dsi_host); -+ -+ clk_disable_unprepare(dsi->pll_phy_clock); -+ clk_disable_unprepare(dsi->escape_clock); -+ -+ if (dsi->port == 1) -+ vc4->dsi1 = NULL; -+} -+ -+static const struct component_ops vc4_dsi_ops = { -+ .bind = vc4_dsi_bind, -+ .unbind = vc4_dsi_unbind, -+}; -+ -+static int vc4_dsi_dev_probe(struct platform_device *pdev) -+{ -+ return component_add(&pdev->dev, &vc4_dsi_ops); -+} -+ -+static int vc4_dsi_dev_remove(struct platform_device *pdev) -+{ -+ component_del(&pdev->dev, &vc4_dsi_ops); -+ return 0; -+} -+ -+struct platform_driver vc4_dsi_driver = { -+ .probe = vc4_dsi_dev_probe, -+ .remove = vc4_dsi_dev_remove, -+ .driver = { -+ .name = "vc4_dsi", -+ .of_match_table = vc4_dsi_dt_match, -+ }, -+}; diff --git a/target/linux/brcm2708/patches-4.9/0174-ARM-dts-bcm283x-Add-VEC-node-in-bcm283x.dtsi.patch b/target/linux/brcm2708/patches-4.9/0174-ARM-dts-bcm283x-Add-VEC-node-in-bcm283x.dtsi.patch deleted file mode 100644 index a2671f243972..000000000000 --- a/target/linux/brcm2708/patches-4.9/0174-ARM-dts-bcm283x-Add-VEC-node-in-bcm283x.dtsi.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 9389f17c3c92c3ec54e0d689ad46b95b90a8039a Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Fri, 2 Dec 2016 14:48:12 +0100 -Subject: [PATCH] ARM: dts: bcm283x: Add VEC node in bcm283x.dtsi - -Add the VEC (Video EnCoder) node definition in bcm283x.dtsi. - -Signed-off-by: Boris Brezillon -Signed-off-by: Eric Anholt -(cherry picked from commit b899c45208d6f204a6da9a1132577993eeecf0fb) ---- - arch/arm/boot/dts/bcm283x.dtsi | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/arch/arm/boot/dts/bcm283x.dtsi -+++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -310,6 +310,14 @@ - status = "disabled"; - }; - -+ vec: vec@7e806000 { -+ compatible = "brcm,bcm2835-vec"; -+ reg = <0x7e806000 0x1000>; -+ clocks = <&clocks BCM2835_CLOCK_VEC>; -+ interrupts = <2 27>; -+ status = "disabled"; -+ }; -+ - pixelvalve@7e807000 { - compatible = "brcm,bcm2835-pixelvalve2"; - reg = <0x7e807000 0x100>; diff --git a/target/linux/brcm2708/patches-4.9/0175-ARM-dts-bcm283x-Enable-the-VEC-IP-on-all-RaspberryPi.patch b/target/linux/brcm2708/patches-4.9/0175-ARM-dts-bcm283x-Enable-the-VEC-IP-on-all-RaspberryPi.patch deleted file mode 100644 index 8689450266bd..000000000000 --- a/target/linux/brcm2708/patches-4.9/0175-ARM-dts-bcm283x-Enable-the-VEC-IP-on-all-RaspberryPi.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 686aed7763ddc3bd31b45454cbe73fb217a3d1c1 Mon Sep 17 00:00:00 2001 -From: Boris Brezillon -Date: Fri, 2 Dec 2016 14:48:13 +0100 -Subject: [PATCH] ARM: dts: bcm283x: Enable the VEC IP on all RaspberryPi - boards - -Enable the VEC IP on all RaspberryPi boards. - -Signed-off-by: Boris Brezillon -Signed-off-by: Eric Anholt -(cherry picked from commit 5ab1a37c6027c114a87a1ae32cfc5ef303d643c5) ---- - arch/arm/boot/dts/bcm2835-rpi.dtsi | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/arch/arm/boot/dts/bcm2835-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi -@@ -92,3 +92,8 @@ - &dsi1 { - power-domains = <&power RPI_POWER_DOMAIN_DSI1>; - }; -+ -+&vec { -+ power-domains = <&power RPI_POWER_DOMAIN_VEC>; -+ status = "okay"; -+}; diff --git a/target/linux/brcm2708/patches-4.9/0176-BCM270X-Disable-VEC-unless-vc4-kms-v3d-is-present.patch b/target/linux/brcm2708/patches-4.9/0176-BCM270X-Disable-VEC-unless-vc4-kms-v3d-is-present.patch deleted file mode 100644 index 42c39650e7af..000000000000 --- a/target/linux/brcm2708/patches-4.9/0176-BCM270X-Disable-VEC-unless-vc4-kms-v3d-is-present.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 323d84f926d907f424c3e55bec55ec84a9d04657 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 23 Jan 2017 11:41:54 -0800 -Subject: [PATCH] BCM270X: Disable VEC unless vc4-kms-v3d is present. - -Signed-off-by: Eric Anholt ---- - arch/arm/boot/dts/bcm2708-rpi.dtsi | 4 ++++ - arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 7 +++++++ - 2 files changed, 11 insertions(+) - ---- a/arch/arm/boot/dts/bcm2708-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi -@@ -107,3 +107,7 @@ - &usb { - power-domains = <&power RPI_POWER_DOMAIN_USB>; - }; -+ -+&vec { -+ status = "disabled"; -+}; ---- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts -+++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts -@@ -148,6 +148,13 @@ - }; - }; - -+ fragment@18 { -+ target = <&vec>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ - __overrides__ { - cma-256 = <0>,"+0-1-2-3-4"; - cma-192 = <0>,"-0+1-2-3-4"; diff --git a/target/linux/brcm2708/patches-4.9/0177-drm-vc4-Name-the-primary-and-cursor-planes-in-fkms.patch b/target/linux/brcm2708/patches-4.9/0177-drm-vc4-Name-the-primary-and-cursor-planes-in-fkms.patch deleted file mode 100644 index 208ff58efb0c..000000000000 --- a/target/linux/brcm2708/patches-4.9/0177-drm-vc4-Name-the-primary-and-cursor-planes-in-fkms.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 789e1599cc6589b2a5c05c0f0bcd57fdaeb1b474 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 1 Feb 2017 17:09:18 -0800 -Subject: [PATCH] drm/vc4: Name the primary and cursor planes in fkms. - -This makes debugging nicer, compared to trying to remember what the -IDs are. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -267,7 +267,7 @@ static struct drm_plane *vc4_fkms_plane_ - ret = drm_universal_plane_init(dev, plane, 0xff, - &vc4_plane_funcs, - primary ? &xrgb8888 : &argb8888, 1, -- type, NULL); -+ type, primary ? "primary" : "cursor"); - - if (type == DRM_PLANE_TYPE_PRIMARY) { - vc4_plane->fbinfo = diff --git a/target/linux/brcm2708/patches-4.9/0178-drm-vc4-Add-DRM_DEBUG_ATOMIC-for-the-insides-of-fkms.patch b/target/linux/brcm2708/patches-4.9/0178-drm-vc4-Add-DRM_DEBUG_ATOMIC-for-the-insides-of-fkms.patch deleted file mode 100644 index f3f141097bd1..000000000000 --- a/target/linux/brcm2708/patches-4.9/0178-drm-vc4-Add-DRM_DEBUG_ATOMIC-for-the-insides-of-fkms.patch +++ /dev/null @@ -1,69 +0,0 @@ -From ac45ecdcbc38c6ec6b477980d0cd0760267f6057 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 1 Feb 2017 17:10:09 -0800 -Subject: [PATCH] drm/vc4: Add DRM_DEBUG_ATOMIC for the insides of fkms. - -Trying to debug weston on fkms involved figuring out what calls I was -making to the firmware. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 26 ++++++++++++++++++++++++++ - 1 file changed, 26 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -102,6 +102,11 @@ static int vc4_plane_set_primary_blank(s - struct vc4_dev *vc4 = to_vc4_dev(plane->dev); - - u32 packet = blank; -+ -+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary plane %s", -+ plane->base.id, plane->name, -+ blank ? "blank" : "unblank"); -+ - return rpi_firmware_property(vc4->firmware, - RPI_FIRMWARE_FRAMEBUFFER_BLANK, - &packet, sizeof(packet)); -@@ -149,6 +154,16 @@ static void vc4_primary_plane_atomic_upd - WARN_ON_ONCE(vc4_plane->pitch != fb->pitches[0]); - } - -+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary update %dx%d@%d +%d,%d 0x%08x/%d\n", -+ plane->base.id, plane->name, -+ state->crtc_w, -+ state->crtc_h, -+ bpp, -+ state->crtc_x, -+ state->crtc_y, -+ bo->paddr + fb->offsets[0], -+ fb->pitches[0]); -+ - ret = rpi_firmware_transaction(vc4->firmware, - RPI_FIRMWARE_CHAN_FB, - vc4_plane->fbinfo_bus_addr); -@@ -178,6 +193,15 @@ static void vc4_cursor_plane_atomic_upda - WARN_ON_ONCE(fb->pitches[0] != state->crtc_w * 4); - WARN_ON_ONCE(fb->bits_per_pixel != 32); - -+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] update %dx%d cursor at %d,%d (0x%08x/%d)", -+ plane->base.id, plane->name, -+ state->crtc_w, -+ state->crtc_h, -+ state->crtc_x, -+ state->crtc_y, -+ bo->paddr + fb->offsets[0], -+ fb->pitches[0]); -+ - ret = rpi_firmware_property(vc4->firmware, - RPI_FIRMWARE_SET_CURSOR_STATE, - &packet_state, -@@ -200,6 +224,8 @@ static void vc4_cursor_plane_atomic_disa - u32 packet_state[] = { false, 0, 0, 0 }; - int ret; - -+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] disabling cursor", plane->base.id, plane->name); -+ - ret = rpi_firmware_property(vc4->firmware, - RPI_FIRMWARE_SET_CURSOR_STATE, - &packet_state, diff --git a/target/linux/brcm2708/patches-4.9/0179-drm-vc4-Fix-sending-of-page-flip-completion-events-i.patch b/target/linux/brcm2708/patches-4.9/0179-drm-vc4-Fix-sending-of-page-flip-completion-events-i.patch deleted file mode 100644 index 73fbf2bc9940..000000000000 --- a/target/linux/brcm2708/patches-4.9/0179-drm-vc4-Fix-sending-of-page-flip-completion-events-i.patch +++ /dev/null @@ -1,42 +0,0 @@ -From bc93583742c7ba9c84462664d4c798ba43bef26f Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 2 Feb 2017 09:42:18 -0800 -Subject: [PATCH] drm/vc4: Fix sending of page flip completion events in FKMS - mode. - -In the rewrite of vc4_crtc.c for fkms, I dropped the part of the -CRTC's atomic flush handler that moved the completion event from the -proposed atomic state change to the CRTC's current state. That meant -that when full screen pageflipping happened (glxgears -fullscreen in -X, compton, por weston), the app would end up blocked firever waiting -to draw its next frame. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_firmware_kms.c | 15 +++++++++++++++ - 1 file changed, 15 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c -+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c -@@ -338,6 +338,21 @@ static int vc4_crtc_atomic_check(struct - static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state) - { -+ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); -+ struct drm_device *dev = crtc->dev; -+ -+ if (crtc->state->event) { -+ unsigned long flags; -+ -+ crtc->state->event->pipe = drm_crtc_index(crtc); -+ -+ WARN_ON(drm_crtc_vblank_get(crtc) != 0); -+ -+ spin_lock_irqsave(&dev->event_lock, flags); -+ vc4_crtc->event = crtc->state->event; -+ crtc->state->event = NULL; -+ spin_unlock_irqrestore(&dev->event_lock, flags); -+ } - } - - static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) diff --git a/target/linux/brcm2708/patches-4.9/0180-drm-vc4-Fulfill-user-BO-creation-requests-from-the-k.patch b/target/linux/brcm2708/patches-4.9/0180-drm-vc4-Fulfill-user-BO-creation-requests-from-the-k.patch deleted file mode 100644 index c0967b463932..000000000000 --- a/target/linux/brcm2708/patches-4.9/0180-drm-vc4-Fulfill-user-BO-creation-requests-from-the-k.patch +++ /dev/null @@ -1,53 +0,0 @@ -From cb8a5a1cf8cfd5b88fe641ada9a2dfb318d43c3f Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Wed, 8 Feb 2017 15:00:54 -0800 -Subject: [PATCH] drm/vc4: Fulfill user BO creation requests from the kernel BO - cache. - -The from_cache flag was actually "the BO is invisible to userspace", -so we can repurpose to just zero out a cached BO and return it to -userspace. - -Improves wall time for a loop of 5 glsl-algebraic-add-add-1 by --1.44989% +/- 0.862891% (n=28, 1 outlier removed from each that -appeared to be other system noise) - -Note that there's an intel-gpu-tools test to check for the proper -zeroing behavior here, which we continue to pass. - -Signed-off-by: Eric Anholt ---- - drivers/gpu/drm/vc4/vc4_bo.c | 13 +++++++------ - 1 file changed, 7 insertions(+), 6 deletions(-) - ---- a/drivers/gpu/drm/vc4/vc4_bo.c -+++ b/drivers/gpu/drm/vc4/vc4_bo.c -@@ -208,21 +208,22 @@ struct drm_gem_object *vc4_create_object - } - - struct vc4_bo *vc4_bo_create(struct drm_device *dev, size_t unaligned_size, -- bool from_cache) -+ bool allow_unzeroed) - { - size_t size = roundup(unaligned_size, PAGE_SIZE); - struct vc4_dev *vc4 = to_vc4_dev(dev); - struct drm_gem_cma_object *cma_obj; -+ struct vc4_bo *bo; - - if (size == 0) - return ERR_PTR(-EINVAL); - - /* First, try to get a vc4_bo from the kernel BO cache. */ -- if (from_cache) { -- struct vc4_bo *bo = vc4_bo_get_from_cache(dev, size); -- -- if (bo) -- return bo; -+ bo = vc4_bo_get_from_cache(dev, size); -+ if (bo) { -+ if (!allow_unzeroed) -+ memset(bo->base.vaddr, 0, bo->base.base.size); -+ return bo; - } - - cma_obj = drm_gem_cma_create(dev, size); diff --git a/target/linux/brcm2708/patches-4.9/0181-drm-vc4-Fix-OOPSes-from-trying-to-cache-a-partially-.patch b/target/linux/brcm2708/patches-4.9/0181-drm-vc4-Fix-OOPSes-from-trying-to-cache-a-partially-.patch deleted file mode 100644 index 000f3a8df374..000000000000 --- a/target/linux/brcm2708/patches-4.9/0181-drm-vc4-Fix-OOPSes-from-trying-to-cache-a-partially-.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 3f131f18e76bb3fa56158adea3abddeaac68e860 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Thu, 9 Feb 2017 09:23:34 -0800 -Subject: [PATCH] drm/vc4: Fix OOPSes from trying to cache a partially - constructed BO. - -If a CMA allocation failed, the partially constructed BO would be -unreferenced through the normal path, and we might choose to put it in -the BO cache. If we then reused it before it expired from the cache, -the kernel would OOPS. - -Signed-off-by: Eric Anholt -Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.") ---- - drivers/gpu/drm/vc4/vc4_bo.c | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/drivers/gpu/drm/vc4/vc4_bo.c -+++ b/drivers/gpu/drm/vc4/vc4_bo.c -@@ -314,6 +314,14 @@ void vc4_free_object(struct drm_gem_obje - goto out; - } - -+ /* If this object was partially constructed but CMA allocation -+ * had failed, just free it. -+ */ -+ if (!bo->base.vaddr) { -+ vc4_bo_destroy(bo); -+ goto out; -+ } -+ - cache_list = vc4_get_cache_list_for_size(dev, gem_bo->size); - if (!cache_list) { - vc4_bo_destroy(bo); diff --git a/target/linux/brcm2708/patches-4.9/0182-drm-vc4-Verify-at-boot-that-CMA-doesn-t-cross-a-256M.patch b/target/linux/brcm2708/patches-4.9/0182-drm-vc4-Verify-at-boot-that-CMA-doesn-t-cross-a-256M.patch deleted file mode 100644 index 453d027ae96a..000000000000 --- a/target/linux/brcm2708/patches-4.9/0182-drm-vc4-Verify-at-boot-that-CMA-doesn-t-cross-a-256M.patch +++ /dev/null @@ -1,79 +0,0 @@ -From b280acf3c32746106c81419390f5b1869d644f66 Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Mon, 12 Oct 2015 08:58:08 -0700 -Subject: [PATCH] drm/vc4: Verify at boot that CMA doesn't cross a 256MB - boundary. - -I've seen lots of users cranking CMA up higher, so throw an error if -they do. - -Signed-off-by: Eric Anholt ---- - drivers/base/dma-contiguous.c | 1 + - drivers/gpu/drm/vc4/vc4_v3d.c | 18 ++++++++++++++++++ - mm/cma.c | 2 ++ - 3 files changed, 21 insertions(+) - ---- a/drivers/base/dma-contiguous.c -+++ b/drivers/base/dma-contiguous.c -@@ -35,6 +35,7 @@ - #endif - - struct cma *dma_contiguous_default_area; -+EXPORT_SYMBOL(dma_contiguous_default_area); - - /* - * Default global CMA area size can be defined in kernel's .config. ---- a/drivers/gpu/drm/vc4/vc4_v3d.c -+++ b/drivers/gpu/drm/vc4/vc4_v3d.c -@@ -16,7 +16,10 @@ - * this program. If not, see . - */ - -+#include "linux/init.h" -+#include "linux/cma.h" - #include "linux/component.h" -+#include "linux/dma-contiguous.h" - #include "linux/pm_runtime.h" - #include "vc4_drv.h" - #include "vc4_regs.h" -@@ -185,8 +188,23 @@ static int vc4_v3d_bind(struct device *d - struct drm_device *drm = dev_get_drvdata(master); - struct vc4_dev *vc4 = to_vc4_dev(drm); - struct vc4_v3d *v3d = NULL; -+ struct cma *cma; - int ret; - -+ cma = dev_get_cma_area(dev); -+ if (!cma) -+ return -EINVAL; -+ -+ if ((cma_get_base(cma) & 0xf0000000) != -+ ((cma_get_base(cma) + cma_get_size(cma) - 1) & 0xf0000000)) { -+ DRM_ERROR("V3D requires that the CMA area (0x%08lx - 0x%08lx) " -+ "not span a 256MB boundary, or memory corruption " -+ "would happen.\n", -+ (long)cma_get_base(cma), -+ cma_get_base(cma) + cma_get_size(cma)); -+ return -EINVAL; -+ } -+ - v3d = devm_kzalloc(&pdev->dev, sizeof(*v3d), GFP_KERNEL); - if (!v3d) - return -ENOMEM; ---- a/mm/cma.c -+++ b/mm/cma.c -@@ -47,11 +47,13 @@ phys_addr_t cma_get_base(const struct cm - { - return PFN_PHYS(cma->base_pfn); - } -+EXPORT_SYMBOL(cma_get_base); - - unsigned long cma_get_size(const struct cma *cma) - { - return cma->count << PAGE_SHIFT; - } -+EXPORT_SYMBOL(cma_get_size); - - static unsigned long cma_bitmap_aligned_mask(const struct cma *cma, - int align_order) diff --git a/target/linux/brcm2708/patches-4.9/0183-BCM270X_DT-Add-SMSC-ethernet-controller-to-DT.patch b/target/linux/brcm2708/patches-4.9/0183-BCM270X_DT-Add-SMSC-ethernet-controller-to-DT.patch deleted file mode 100644 index 76b1bf3bbfb6..000000000000 --- a/target/linux/brcm2708/patches-4.9/0183-BCM270X_DT-Add-SMSC-ethernet-controller-to-DT.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 35a2c1524b21318228f0566d9a4ac53bf3138bdc Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 17 Feb 2017 09:47:11 +0000 -Subject: [PATCH] BCM270X_DT: Add SMSC ethernet controller to DT - -With an ethernet node in the DT, a suitable firmware can populate the -local-mac-address property, removing the need for a downstream patch -to the driver to read its MAC address from a module parameter. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 1 + - arch/arm/boot/dts/bcm2708-rpi-b.dts | 1 + - arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 1 + - arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 1 + - 4 files changed, 4 insertions(+) - ---- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts -@@ -1,6 +1,7 @@ - /dts-v1/; - - #include "bcm2708.dtsi" -+#include "bcm283x-rpi-smsc9514.dtsi" - - / { - model = "Raspberry Pi Model B+"; ---- a/arch/arm/boot/dts/bcm2708-rpi-b.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts -@@ -1,6 +1,7 @@ - /dts-v1/; - - #include "bcm2708.dtsi" -+#include "bcm283x-rpi-smsc9512.dtsi" - - / { - model = "Raspberry Pi Model B"; ---- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts -+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts -@@ -1,6 +1,7 @@ - /dts-v1/; - - #include "bcm2709.dtsi" -+#include "bcm283x-rpi-smsc9514.dtsi" - - / { - model = "Raspberry Pi 2 Model B"; ---- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -@@ -5,6 +5,7 @@ - #endif - - #include "bcm2710.dtsi" -+#include "bcm283x-rpi-smsc9514.dtsi" - - / { - model = "Raspberry Pi 3 Model B"; diff --git a/target/linux/brcm2708/patches-4.9/0185-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch b/target/linux/brcm2708/patches-4.9/0185-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch deleted file mode 100644 index 13f6c11f592c..000000000000 --- a/target/linux/brcm2708/patches-4.9/0185-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch +++ /dev/null @@ -1,28 +0,0 @@ -From a2ca8b47db0d08735e1c0ebeaf34e88522091662 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 13 Feb 2017 17:20:08 +0000 -Subject: [PATCH] clk-bcm2835: Mark used PLLs and dividers CRITICAL - -The VPU configures and relies on several PLLs and dividers. Mark all -enabled dividers and their PLLs as CRITICAL to prevent the kernel from -switching them off. - -Signed-off-by: Phil Elwell ---- - drivers/clk/bcm/clk-bcm2835.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1366,6 +1366,11 @@ bcm2835_register_pll_divider(struct bcm2 - divider->div.hw.init = &init; - divider->div.table = NULL; - -+ if (!(cprman_read(cprman, data->cm_reg) & data->hold_mask)) { -+ init.flags |= CLK_IS_CRITICAL; -+ divider->div.flags |= CLK_IS_CRITICAL; -+ } -+ - divider->cprman = cprman; - divider->data = data; - diff --git a/target/linux/brcm2708/patches-4.9/0186-clk-bcm2835-Add-claim-clocks-property.patch b/target/linux/brcm2708/patches-4.9/0186-clk-bcm2835-Add-claim-clocks-property.patch deleted file mode 100644 index 09dcfa7a6824..000000000000 --- a/target/linux/brcm2708/patches-4.9/0186-clk-bcm2835-Add-claim-clocks-property.patch +++ /dev/null @@ -1,133 +0,0 @@ -From 5c1128ebe6c7a4af3f1784a640df7f3698233e9d Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Mon, 13 Feb 2017 17:20:08 +0000 -Subject: [PATCH] clk-bcm2835: Add claim-clocks property - -The claim-clocks property can be used to prevent PLLs and dividers -from being marked as critical. It contains a vector of clock IDs, -as defined by dt-bindings/clock/bcm2835.h. - -Use this mechanism to claim PLLD_DSI0, PLLD_DSI1, PLLH_AUX and -PLLH_PIX for the vc4_kms_v3d driver. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 14 +++++++++ - drivers/clk/bcm/clk-bcm2835.c | 34 ++++++++++++++++++++-- - 2 files changed, 46 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts -+++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts -@@ -5,6 +5,8 @@ - /dts-v1/; - /plugin/; - -+#include -+ - / { - compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; - -@@ -155,6 +157,18 @@ - }; - }; - -+ fragment@19 { -+ target = <&clocks>; -+ __overlay__ { -+ claim-clocks = < -+ BCM2835_PLLD_DSI0 -+ BCM2835_PLLD_DSI1 -+ BCM2835_PLLH_AUX -+ BCM2835_PLLH_PIX -+ >; -+ }; -+ }; -+ - __overrides__ { - cma-256 = <0>,"+0-1-2-3-4"; - cma-192 = <0>,"-0+1-2-3-4"; ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1298,6 +1298,8 @@ static const struct clk_ops bcm2835_vpu_ - .debug_init = bcm2835_clock_debug_init, - }; - -+static bool bcm2835_clk_is_claimed(const char *name); -+ - static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman, - const struct bcm2835_pll_data *data) - { -@@ -1314,6 +1316,9 @@ static struct clk_hw *bcm2835_register_p - init.ops = &bcm2835_pll_clk_ops; - init.flags = CLK_IGNORE_UNUSED; - -+ if (!bcm2835_clk_is_claimed(data->name)) -+ init.flags |= CLK_IS_CRITICAL; -+ - pll = kzalloc(sizeof(*pll), GFP_KERNEL); - if (!pll) - return NULL; -@@ -1367,8 +1372,10 @@ bcm2835_register_pll_divider(struct bcm2 - divider->div.table = NULL; - - if (!(cprman_read(cprman, data->cm_reg) & data->hold_mask)) { -- init.flags |= CLK_IS_CRITICAL; -- divider->div.flags |= CLK_IS_CRITICAL; -+ if (!bcm2835_clk_is_claimed(data->source_pll)) -+ init.flags |= CLK_IS_CRITICAL; -+ if (!bcm2835_clk_is_claimed(data->name)) -+ divider->div.flags |= CLK_IS_CRITICAL; - } - - divider->cprman = cprman; -@@ -2104,6 +2111,8 @@ static const struct bcm2835_clk_desc clk - .ctl_reg = CM_PERIICTL), - }; - -+static bool bcm2835_clk_claimed[ARRAY_SIZE(clk_desc_array)]; -+ - /* - * Permanently take a reference on the parent of the SDRAM clock. - * -@@ -2123,6 +2132,19 @@ static int bcm2835_mark_sdc_parent_criti - return clk_prepare_enable(parent); - } - -+static bool bcm2835_clk_is_claimed(const char *name) -+{ -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(clk_desc_array); i++) { -+ const char *clk_name = *(const char **)(clk_desc_array[i].data); -+ if (!strcmp(name, clk_name)) -+ return bcm2835_clk_claimed[i]; -+ } -+ -+ return false; -+} -+ - static int bcm2835_clk_probe(struct platform_device *pdev) - { - struct device *dev = &pdev->dev; -@@ -2132,6 +2154,7 @@ static int bcm2835_clk_probe(struct plat - const struct bcm2835_clk_desc *desc; - const size_t asize = ARRAY_SIZE(clk_desc_array); - size_t i; -+ u32 clk_id; - int ret; - - cprman = devm_kzalloc(dev, sizeof(*cprman) + -@@ -2147,6 +2170,13 @@ static int bcm2835_clk_probe(struct plat - if (IS_ERR(cprman->regs)) - return PTR_ERR(cprman->regs); - -+ memset(bcm2835_clk_claimed, 0, sizeof(bcm2835_clk_claimed)); -+ for (i = 0; -+ !of_property_read_u32_index(pdev->dev.of_node, "claim-clocks", -+ i, &clk_id); -+ i++) -+ bcm2835_clk_claimed[clk_id]= true; -+ - memcpy(cprman->real_parent_names, cprman_parent_names, - sizeof(cprman_parent_names)); - of_clk_parent_fill(dev->of_node, cprman->real_parent_names, diff --git a/target/linux/brcm2708/patches-4.9/0187-dmaengine-bcm2835-Fix-cyclic-DMA-period-splitting.patch b/target/linux/brcm2708/patches-4.9/0187-dmaengine-bcm2835-Fix-cyclic-DMA-period-splitting.patch deleted file mode 100644 index fa0d998a2d93..000000000000 --- a/target/linux/brcm2708/patches-4.9/0187-dmaengine-bcm2835-Fix-cyclic-DMA-period-splitting.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 9fd7a158ec098ab05b8d3ec2c2973b3dc7e498f3 Mon Sep 17 00:00:00 2001 -From: Matthias Reichl -Date: Mon, 20 Feb 2017 20:01:16 +0100 -Subject: [PATCH] dmaengine: bcm2835: Fix cyclic DMA period splitting - -The code responsible for splitting periods into chunks that -can be handled by the DMA controller missed to update total_len, -the number of bytes processed in the current period, when there -are more chunks to follow. - -Therefore total_len was stuck at 0 and the code didn't work at all. -This resulted in a wrong control block layout and audio issues because -the cyclic DMA callback wasn't executing on period boundaries. - -Fix this by adding the missing total_len update. - -Signed-off-by: Matthias Reichl -Signed-off-by: Martin Sperl -Tested-by: Clive Messer -Reviewed-by: Eric Anholt ---- - drivers/dma/bcm2835-dma.c | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - ---- a/drivers/dma/bcm2835-dma.c -+++ b/drivers/dma/bcm2835-dma.c -@@ -253,8 +253,11 @@ static void bcm2835_dma_create_cb_set_le - */ - - /* have we filled in period_length yet? */ -- if (*total_len + control_block->length < period_len) -+ if (*total_len + control_block->length < period_len) { -+ /* update number of bytes in this period so far */ -+ *total_len += control_block->length; - return; -+ } - - /* calculate the length that remains to reach period_length */ - control_block->length = period_len - *total_len; diff --git a/target/linux/brcm2708/patches-4.9/0188-Add-ads1015-driver-to-config.patch b/target/linux/brcm2708/patches-4.9/0188-Add-ads1015-driver-to-config.patch deleted file mode 100644 index 1303bdc101d7..000000000000 --- a/target/linux/brcm2708/patches-4.9/0188-Add-ads1015-driver-to-config.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 9e638878dd33652b34e51746d369afba6103d77e Mon Sep 17 00:00:00 2001 -From: Scott Ellis -Date: Thu, 23 Feb 2017 11:56:20 -0500 -Subject: [PATCH] Add ads1015 driver to config - ---- - arch/arm/configs/bcm2709_defconfig | 3 ++- - arch/arm/configs/bcmrpi_defconfig | 3 ++- - 2 files changed, 4 insertions(+), 2 deletions(-) - ---- a/arch/arm/configs/bcm2709_defconfig -+++ b/arch/arm/configs/bcm2709_defconfig -@@ -653,6 +653,7 @@ CONFIG_HWMON=m - CONFIG_SENSORS_LM75=m - CONFIG_SENSORS_SHT21=m - CONFIG_SENSORS_SHTC1=m -+CONFIG_SENSORS_ADS1015=m - CONFIG_SENSORS_INA2XX=m - CONFIG_THERMAL=y - CONFIG_THERMAL_BCM2835=y -@@ -833,9 +834,9 @@ CONFIG_VIDEO_OV7640=m - CONFIG_VIDEO_MT9V011=m - CONFIG_DRM=m - CONFIG_DRM_LOAD_EDID_FIRMWARE=y -+CONFIG_DRM_UDL=m - CONFIG_DRM_PANEL_SIMPLE=m - CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m --CONFIG_DRM_UDL=m - CONFIG_DRM_VC4=m - CONFIG_FB=y - CONFIG_FB_BCM2708=y ---- a/arch/arm/configs/bcmrpi_defconfig -+++ b/arch/arm/configs/bcmrpi_defconfig -@@ -647,6 +647,7 @@ CONFIG_HWMON=m - CONFIG_SENSORS_LM75=m - CONFIG_SENSORS_SHT21=m - CONFIG_SENSORS_SHTC1=m -+CONFIG_SENSORS_ADS1015=m - CONFIG_SENSORS_INA2XX=m - CONFIG_THERMAL=y - CONFIG_THERMAL_BCM2835=y -@@ -827,9 +828,9 @@ CONFIG_VIDEO_OV7640=m - CONFIG_VIDEO_MT9V011=m - CONFIG_DRM=m - CONFIG_DRM_LOAD_EDID_FIRMWARE=y -+CONFIG_DRM_UDL=m - CONFIG_DRM_PANEL_SIMPLE=m - CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m --CONFIG_DRM_UDL=m - CONFIG_DRM_VC4=m - CONFIG_FB=y - CONFIG_FB_BCM2708=y diff --git a/target/linux/brcm2708/patches-4.9/0189-config-add-slcan-kernel-module.patch b/target/linux/brcm2708/patches-4.9/0189-config-add-slcan-kernel-module.patch deleted file mode 100644 index 021eb014c8b4..000000000000 --- a/target/linux/brcm2708/patches-4.9/0189-config-add-slcan-kernel-module.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 2fd423706eb3afde2a36845488e18d194b18b0c6 Mon Sep 17 00:00:00 2001 -From: popcornmix -Date: Fri, 27 Jan 2017 18:49:30 +0000 -Subject: [PATCH] config: add slcan kernel module - -See: https://github.com/raspberrypi/linux/issues/1819 ---- - arch/arm/configs/bcm2709_defconfig | 1 + - arch/arm/configs/bcmrpi_defconfig | 1 + - 2 files changed, 2 insertions(+) - ---- a/arch/arm/configs/bcm2709_defconfig -+++ b/arch/arm/configs/bcm2709_defconfig -@@ -361,6 +361,7 @@ CONFIG_BAYCOM_SER_HDX=m - CONFIG_YAM=m - CONFIG_CAN=m - CONFIG_CAN_VCAN=m -+CONFIG_CAN_SLCAN=m - CONFIG_CAN_MCP251X=m - CONFIG_IRDA=m - CONFIG_IRLAN=m ---- a/arch/arm/configs/bcmrpi_defconfig -+++ b/arch/arm/configs/bcmrpi_defconfig -@@ -357,6 +357,7 @@ CONFIG_BAYCOM_SER_HDX=m - CONFIG_YAM=m - CONFIG_CAN=m - CONFIG_CAN_VCAN=m -+CONFIG_CAN_SLCAN=m - CONFIG_CAN_MCP251X=m - CONFIG_IRDA=m - CONFIG_IRLAN=m diff --git a/target/linux/brcm2708/patches-4.9/0190-sound-Support-for-Dion-Audio-LOCO-V2-DAC-AMP-HAT.patch b/target/linux/brcm2708/patches-4.9/0190-sound-Support-for-Dion-Audio-LOCO-V2-DAC-AMP-HAT.patch deleted file mode 100644 index eb6422a469c1..000000000000 --- a/target/linux/brcm2708/patches-4.9/0190-sound-Support-for-Dion-Audio-LOCO-V2-DAC-AMP-HAT.patch +++ /dev/null @@ -1,251 +0,0 @@ -From a20dbe4972ea3df27f24c5397102e1346462a4f4 Mon Sep 17 00:00:00 2001 -From: Miquel -Date: Fri, 24 Feb 2017 20:51:06 +0100 -Subject: [PATCH] sound: Support for Dion Audio LOCO-V2 DAC-AMP HAT - -Signed-off-by: Miquel Blauw ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 19 +++++ - arch/arm/configs/bcm2709_defconfig | 1 + - arch/arm/configs/bcmrpi_defconfig | 1 + - sound/soc/bcm/Kconfig | 7 ++ - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/dionaudio_loco-v2.c | 140 ++++++++++++++++++++++++++++++++++++ - 7 files changed, 171 insertions(+) - create mode 100644 sound/soc/bcm/dionaudio_loco-v2.c - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -13,6 +13,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - bmp085_i2c-sensor.dtbo \ - dht11.dtbo \ - dionaudio-loco.dtbo \ -+ dionaudio-loco-v2.dtbo \ - dpi18.dtbo \ - dpi24.dtbo \ - dwc-otg.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -308,6 +308,25 @@ Load: dtoverlay=dionaudio-loco - Params: - - -+Name: dionaudio-loco-v2 -+Info: Configures the Dion Audio LOCO-V2 DAC-AMP -+Load: dtoverlay=dionaudio-loco-v2,= -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. Enable with -+ "dtoverlay=hifiberry-dacplus,24db_digital_gain" -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24dB_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ -+ - Name: dpi18 - Info: Overlay for a generic 18-bit DPI display - This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output ---- a/arch/arm/configs/bcm2709_defconfig -+++ b/arch/arm/configs/bcm2709_defconfig -@@ -889,6 +889,7 @@ CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m - CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m - CONFIG_SND_DIGIDAC1_SOUNDCARD=m - CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m -+CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m - CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m - CONFIG_SND_PISOUND=m - CONFIG_SND_SOC_ADAU1701=m ---- a/arch/arm/configs/bcmrpi_defconfig -+++ b/arch/arm/configs/bcmrpi_defconfig -@@ -883,6 +883,7 @@ CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m - CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m - CONFIG_SND_DIGIDAC1_SOUNDCARD=m - CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m -+CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m - CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m - CONFIG_SND_PISOUND=m - CONFIG_SND_SOC_ADAU1701=m ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -133,6 +133,13 @@ config SND_BCM2708_SOC_DIONAUDIO_LOCO - help - Say Y or M if you want to add support for Dion Audio LOCO. - -+config SND_BCM2708_SOC_DIONAUDIO_LOCO_V2 -+ tristate "Support for Dion Audio LOCO-V2 DAC-AMP" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_PCM5122 -+ help -+ Say Y or M if you want to add support for Dion Audio LOCO-V2. -+ - config SND_BCM2708_SOC_ALLO_PIANO_DAC - tristate "Support for Allo Piano DAC" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -25,6 +25,7 @@ snd-soc-raspidac3-objs := raspidac3.o - snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o - snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o - snd-soc-dionaudio-loco-objs := dionaudio_loco.o -+snd-soc-dionaudio-loco-v2-objs := dionaudio_loco-v2.o - snd-soc-allo-piano-dac-objs := allo-piano-dac.o - snd-soc-pisound-objs := pisound.o - -@@ -44,5 +45,6 @@ obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) - obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o - obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o - obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o -+obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2) += snd-soc-dionaudio-loco-v2.o - obj-$(CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC) += snd-soc-allo-piano-dac.o - obj-$(CONFIG_SND_PISOUND) += snd-soc-pisound.o ---- /dev/null -+++ b/sound/soc/bcm/dionaudio_loco-v2.c -@@ -0,0 +1,140 @@ -+/* -+ * ASoC Driver for Dion Audio LOCO-V2 DAC-AMP -+ * -+ * Author: Miquel Blauw -+ * Copyright 2017 -+ * -+ * Based on the software of the RPi-DAC writen by Florian Meier -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+static bool digital_gain_0db_limit = true; -+ -+static int snd_rpi_dionaudio_loco_v2_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ if (digital_gain_0db_limit) { -+ int ret; -+ struct snd_soc_card *card = rtd->card; -+ -+ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); -+ if (ret < 0) -+ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); -+ } -+ -+ return 0; -+} -+ -+static int snd_rpi_dionaudio_loco_v2_hw_params( -+ struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ -+ unsigned int sample_bits = -+ snd_pcm_format_physical_width(params_format(params)); -+ -+ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); -+} -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_rpi_dionaudio_loco_v2_ops = { -+ .hw_params = snd_rpi_dionaudio_loco_v2_hw_params, -+}; -+ -+static struct snd_soc_dai_link snd_rpi_dionaudio_loco_v2_dai[] = { -+{ -+ .name = "DionAudio LOCO-V2", -+ .stream_name = "DionAudio LOCO-V2 DAC-AMP", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "pcm512x-hifi", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "pcm512x.1-004d", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBS_CFS, -+ .ops = &snd_rpi_dionaudio_loco_v2_ops, -+ .init = snd_rpi_dionaudio_loco_v2_init, -+},}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_rpi_dionaudio_loco_v2 = { -+ .name = "Dion Audio LOCO-V2", -+ .dai_link = snd_rpi_dionaudio_loco_v2_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_dionaudio_loco_v2_dai), -+}; -+ -+static int snd_rpi_dionaudio_loco_v2_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ -+ snd_rpi_dionaudio_loco_v2.dev = &pdev->dev; -+ -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai = -+ &snd_rpi_dionaudio_loco_v2_dai[0]; -+ -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } -+ -+ digital_gain_0db_limit = !of_property_read_bool( -+ pdev->dev.of_node, "dionaudio,24db_digital_gain"); -+ } -+ -+ ret = snd_soc_register_card(&snd_rpi_dionaudio_loco_v2); -+ if (ret) -+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", -+ ret); -+ -+ return ret; -+} -+ -+static int snd_rpi_dionaudio_loco_v2_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&snd_rpi_dionaudio_loco_v2); -+} -+ -+static const struct of_device_id dionaudio_of_match[] = { -+ { .compatible = "dionaudio,dionaudio-loco-v2", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, dionaudio_of_match); -+ -+static struct platform_driver snd_rpi_dionaudio_loco_v2_driver = { -+ .driver = { -+ .name = "snd-rpi-dionaudio-loco-v2", -+ .owner = THIS_MODULE, -+ .of_match_table = dionaudio_of_match, -+ }, -+ .probe = snd_rpi_dionaudio_loco_v2_probe, -+ .remove = snd_rpi_dionaudio_loco_v2_remove, -+}; -+ -+module_platform_driver(snd_rpi_dionaudio_loco_v2_driver); -+ -+MODULE_AUTHOR("Miquel Blauw "); -+MODULE_DESCRIPTION("ASoC Driver for DionAudio LOCO-V2"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/0191-SQUASH-Add-LOCO-V2-overlay-from-last-commit.patch b/target/linux/brcm2708/patches-4.9/0191-SQUASH-Add-LOCO-V2-overlay-from-last-commit.patch deleted file mode 100644 index be3618a0bf2f..000000000000 --- a/target/linux/brcm2708/patches-4.9/0191-SQUASH-Add-LOCO-V2-overlay-from-last-commit.patch +++ /dev/null @@ -1,62 +0,0 @@ -From e3b5ca5cb69c36f41436ab8be96710e39442ce28 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Sun, 26 Feb 2017 01:13:02 +0000 -Subject: [PATCH] SQUASH: Add LOCO-V2 overlay from last commit - ---- - .../dts/overlays/dionaudio-loco-v2-overlay.dts | 49 ++++++++++++++++++++++ - 1 file changed, 49 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts - ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts -@@ -0,0 +1,49 @@ -+/* -+ * Definitions for Dion Audio LOCO-V2 DAC-AMP -+ * eg. dtoverlay=dionaudio-loco-v2 -+ * -+ * PCM5242 DAC (in software mode) and TPA3255 AMP. -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&sound>; -+ frag0: __overlay__ { -+ compatible = "dionaudio,dionaudio-loco-v2"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm5122@4c { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4d>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = <&frag0>,"dionaudio,24db_digital_gain?"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.9/0192-Add-support-for-Fe-Pi-audio-sound-card.-1867.patch b/target/linux/brcm2708/patches-4.9/0192-Add-support-for-Fe-Pi-audio-sound-card.-1867.patch deleted file mode 100644 index 262dc14bce3e..000000000000 --- a/target/linux/brcm2708/patches-4.9/0192-Add-support-for-Fe-Pi-audio-sound-card.-1867.patch +++ /dev/null @@ -1,333 +0,0 @@ -From c646d023c75607a9ebc7296fe424d6eb4e804164 Mon Sep 17 00:00:00 2001 -From: Fe-Pi -Date: Wed, 1 Mar 2017 04:42:43 -0700 -Subject: [PATCH] Add support for Fe-Pi audio sound card. (#1867) - -Fe-Pi Audio Sound Card is based on NXP SGTL5000 codec. -Mechanical specification of the board is the same the Raspberry Pi Zero. -3.5mm jacks for Headphone/Mic, Line In, and Line Out. - -Signed-off-by: Henry Kupis ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 6 + - arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts | 70 +++++++++ - arch/arm/configs/bcm2709_defconfig | 1 + - arch/arm/configs/bcmrpi_defconfig | 1 + - sound/soc/bcm/Kconfig | 7 + - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/fe-pi-audio.c | 158 +++++++++++++++++++++ - 8 files changed, 246 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts - create mode 100644 sound/soc/bcm/fe-pi-audio.c - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -20,6 +20,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - dwc2.dtbo \ - enc28j60.dtbo \ - enc28j60-spi2.dtbo \ -+ fe-pi-audio.dtbo \ - gpio-ir.dtbo \ - gpio-poweroff.dtbo \ - hifiberry-amp.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -383,6 +383,12 @@ Params: int_pin GPIO use - speed SPI bus speed (default 12000000) - - -+Name: fe-pi-audio -+Info: Configures the Fe-Pi Audio Sound Card -+Load: dtoverlay=fe-pi-audio -+Params: -+ -+ - Name: gpio-ir - Info: Use GPIO pin as rc-core style infrared receiver input. The rc-core- - based gpio_ir_recv driver maps received keys directly to a ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts -@@ -0,0 +1,70 @@ -+// Definitions for Fe-Pi Audio -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&clocks>; -+ __overlay__ { -+ sgtl5000_mclk: sgtl5000_mclk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <12288000>; -+ clock-output-names = "sgtl5000-mclk"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&soc>; -+ __overlay__ { -+ reg_1v8: reg_1v8@0 { -+ compatible = "regulator-fixed"; -+ regulator-name = "1V8"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ regulator-always-on; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ sgtl5000@0a { -+ #sound-dai-cells = <0>; -+ compatible = "fepi,sgtl5000"; -+ reg = <0x0a>; -+ clocks = <&sgtl5000_mclk>; -+ micbias-resistor-k-ohms = <2>; -+ micbias-voltage-m-volts = <3000>; -+ VDDA-supply = <&vdd_3v3_reg>; -+ VDDIO-supply = <&vdd_3v3_reg>; -+ VDDD-supply = <®_1v8>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "fe-pi,fe-pi-audio"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; ---- a/arch/arm/configs/bcm2709_defconfig -+++ b/arch/arm/configs/bcm2709_defconfig -@@ -891,6 +891,7 @@ CONFIG_SND_DIGIDAC1_SOUNDCARD=m - CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m - CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m - CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m -+CONFIG_SND_BCM2708_SOC_FE_PI_AUDIO=m - CONFIG_SND_PISOUND=m - CONFIG_SND_SOC_ADAU1701=m - CONFIG_SND_SOC_ADAU7002=m ---- a/arch/arm/configs/bcmrpi_defconfig -+++ b/arch/arm/configs/bcmrpi_defconfig -@@ -885,6 +885,7 @@ CONFIG_SND_DIGIDAC1_SOUNDCARD=m - CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m - CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m - CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m -+CONFIG_SND_BCM2708_SOC_FE_PI_AUDIO=m - CONFIG_SND_PISOUND=m - CONFIG_SND_SOC_ADAU1701=m - CONFIG_SND_SOC_ADAU7002=m ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -147,6 +147,13 @@ config SND_BCM2708_SOC_ALLO_PIANO_DAC - help - Say Y or M if you want to add support for Allo Piano DAC. - -+config SND_BCM2708_SOC_FE_PI_AUDIO -+ tristate "Support for Fe-Pi-Audio" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_SGTL5000 -+ help -+ Say Y or M if you want to add support for Fe-Pi-Audio. -+ - config SND_PISOUND - tristate "Support for Blokas Labs pisound" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -28,6 +28,7 @@ snd-soc-dionaudio-loco-objs := dionaudio - snd-soc-dionaudio-loco-v2-objs := dionaudio_loco-v2.o - snd-soc-allo-piano-dac-objs := allo-piano-dac.o - snd-soc-pisound-objs := pisound.o -+snd-soc-fe-pi-audio-objs := fe-pi-audio.o - - obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o -@@ -48,3 +49,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_L - obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2) += snd-soc-dionaudio-loco-v2.o - obj-$(CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC) += snd-soc-allo-piano-dac.o - obj-$(CONFIG_SND_PISOUND) += snd-soc-pisound.o -+obj-$(CONFIG_SND_BCM2708_SOC_FE_PI_AUDIO) += snd-soc-fe-pi-audio.o ---- /dev/null -+++ b/sound/soc/bcm/fe-pi-audio.c -@@ -0,0 +1,158 @@ -+/* -+ * ASoC Driver for Fe-Pi Audio Sound Card -+ * -+ * Author: Henry Kupis -+ * Copyright 2016 -+ * based on code by Florian Meier -+ * based on code by Shawn Guo -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "../codecs/sgtl5000.h" -+ -+static int snd_fe_pi_audio_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ struct snd_soc_card *card = rtd->card; -+ struct snd_soc_codec *codec = rtd->codec; -+ -+ snd_soc_dapm_force_enable_pin(&card->dapm, "LO"); -+ snd_soc_dapm_force_enable_pin(&card->dapm, "ADC"); -+ snd_soc_dapm_force_enable_pin(&card->dapm, "DAC"); -+ snd_soc_dapm_force_enable_pin(&card->dapm, "HP"); -+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, -+ SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP); -+ -+ return 0; -+} -+ -+static int snd_fe_pi_audio_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct device *dev = rtd->card->dev; -+ struct snd_soc_dai *codec_dai = rtd->codec_dai; -+ -+ int ret; -+ -+ /* Set SGTL5000's SYSCLK */ -+ ret = snd_soc_dai_set_sysclk(codec_dai, SGTL5000_SYSCLK, 12288000, SND_SOC_CLOCK_IN); -+ if (ret) { -+ dev_err(dev, "could not set codec driver clock params\n"); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+ -+static struct snd_soc_ops snd_fe_pi_audio_ops = { -+ .hw_params = snd_fe_pi_audio_hw_params, -+}; -+ -+static struct snd_soc_dai_link snd_fe_pi_audio_dai[] = { -+ { -+ .name = "FE-PI", -+ .stream_name = "Fe-Pi HiFi", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "sgtl5000", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "sgtl5000.1-000a", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBM_CFM, -+ .ops = &snd_fe_pi_audio_ops, -+ .init = snd_fe_pi_audio_init, -+ }, -+}; -+ -+static const struct snd_soc_dapm_route fe_pi_audio_dapm_routes[] = { -+ {"ADC", NULL, "Mic Bias"}, -+}; -+ -+ -+static struct snd_soc_card fe_pi_audio = { -+ .name = "Fe-Pi Audio", -+ .owner = THIS_MODULE, -+ .dai_link = snd_fe_pi_audio_dai, -+ .num_links = ARRAY_SIZE(snd_fe_pi_audio_dai), -+ -+ .dapm_routes = fe_pi_audio_dapm_routes, -+ .num_dapm_routes = ARRAY_SIZE(fe_pi_audio_dapm_routes), -+}; -+ -+static int snd_fe_pi_audio_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ struct snd_soc_card *card = &fe_pi_audio; -+ struct device_node *np = pdev->dev.of_node; -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai = &snd_fe_pi_audio_dai[0]; -+ -+ fe_pi_audio.dev = &pdev->dev; -+ -+ i2s_node = of_parse_phandle(np, "i2s-controller", 0); -+ if (!i2s_node) { -+ dev_err(&pdev->dev, "i2s_node phandle missing or invalid\n"); -+ return -EINVAL; -+ } -+ -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ -+ of_node_put(i2s_node); -+ -+ card->dev = &pdev->dev; -+ platform_set_drvdata(pdev, card); -+ -+ ret = snd_soc_register_card(card); -+ if (ret && ret != -EPROBE_DEFER) -+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); -+ -+ return ret; -+} -+ -+static int snd_fe_pi_audio_remove(struct platform_device *pdev) -+{ -+ return snd_soc_unregister_card(&fe_pi_audio); -+} -+ -+static const struct of_device_id snd_fe_pi_audio_of_match[] = { -+ { .compatible = "fe-pi,fe-pi-audio", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, snd_fe_pi_audio_of_match); -+ -+static struct platform_driver snd_fe_pi_audio_driver = { -+ .driver = { -+ .name = "snd-fe-pi-audio", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_fe_pi_audio_of_match, -+ }, -+ .probe = snd_fe_pi_audio_probe, -+ .remove = snd_fe_pi_audio_remove, -+}; -+ -+module_platform_driver(snd_fe_pi_audio_driver); -+ -+MODULE_AUTHOR("Henry Kupis "); -+MODULE_DESCRIPTION("ASoC Driver for Fe-Pi Audio"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/0193-Add-overlay-for-ads1115-ADCs-1864.patch b/target/linux/brcm2708/patches-4.9/0193-Add-overlay-for-ads1115-ADCs-1864.patch deleted file mode 100644 index 39d48e60b3aa..000000000000 --- a/target/linux/brcm2708/patches-4.9/0193-Add-overlay-for-ads1115-ADCs-1864.patch +++ /dev/null @@ -1,159 +0,0 @@ -From 6d5e32067cf3f3169ec15097c175878de365d247 Mon Sep 17 00:00:00 2001 -From: Scott Ellis -Date: Wed, 1 Mar 2017 07:22:24 -0500 -Subject: [PATCH] Add overlay for ads1115 ADCs (#1864) - ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 22 ++++++ - arch/arm/boot/dts/overlays/ads1115-overlay.dts | 103 +++++++++++++++++++++++++ - 3 files changed, 126 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/ads1115-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -4,6 +4,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - adau1977-adc.dtbo \ - adau7002-simple.dtbo \ - ads1015.dtbo \ -+ ads1115.dtbo \ - ads7846.dtbo \ - akkordion-iqdacplus.dtbo \ - allo-piano-dac-pcm512x-audio.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -196,6 +196,28 @@ Params: addr I2C bus - http://www.ti.com/lit/ds/symlink/ads1015.pdf - - -+Name: ads1115 -+Info: Texas Instruments ADS1115 ADC -+Load: dtoverlay=ads1115,[=] -+Params: addr I2C bus address of device. Set based on how the -+ addr pin is wired. (default=0x48 assumes addr -+ is pulled to GND) -+ cha_enable Enable virtual channel a. -+ cha_cfg Set the configuration for virtual channel a. -+ (default=4 configures this channel for the -+ voltage at A0 with respect to GND) -+ cha_datarate Set the datarate (samples/sec) for this channel. -+ (default=7 sets 860 sps) -+ cha_gain Set the gain of the Programmable Gain -+ Amplifier for this channel. (Default 1 sets the -+ full scale of the channel to 4.096 Volts) -+ -+ Channel parameters can be set for each enabled channel. -+ A maximum of 4 channels can be enabled (letters a thru d). -+ For more information refer to the device datasheet at: -+ http://www.ti.com/lit/ds/symlink/ads1115.pdf -+ -+ - Name: ads7846 - Info: ADS7846 Touch controller - Load: dtoverlay=ads7846,= ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/ads1115-overlay.dts -@@ -0,0 +1,103 @@ -+/* -+ * TI ADS1115 multi-channel ADC overlay -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ads1115: ads1115 { -+ compatible = "ti,ads1115"; -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x48>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "i2c_arm/ads1115"; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ channel_a: channel_a { -+ reg = <4>; -+ ti,gain = <1>; -+ ti,datarate = <7>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "i2c_arm/ads1115"; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ channel_b: channel_b { -+ reg = <5>; -+ ti,gain = <1>; -+ ti,datarate = <7>; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "i2c_arm/ads1115"; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ channel_c: channel_c { -+ reg = <6>; -+ ti,gain = <1>; -+ ti,datarate = <7>; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target-path = "i2c_arm/ads1115"; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ channel_d: channel_d { -+ reg = <7>; -+ ti,gain = <1>; -+ ti,datarate = <7>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ addr = <&ads1115>,"reg:0"; -+ cha_enable = <0>,"=1"; -+ cha_cfg = <&channel_a>,"reg:0"; -+ cha_gain = <&channel_a>,"ti,gain:0"; -+ cha_datarate = <&channel_a>,"ti,datarate:0"; -+ chb_enable = <0>,"=2"; -+ chb_cfg = <&channel_b>,"reg:0"; -+ chb_gain = <&channel_b>,"ti,gain:0"; -+ chb_datarate = <&channel_b>,"ti,datarate:0"; -+ chc_enable = <0>,"=3"; -+ chc_cfg = <&channel_c>,"reg:0"; -+ chc_gain = <&channel_c>,"ti,gain:0"; -+ chc_datarate = <&channel_c>,"ti,datarate:0"; -+ chd_enable = <0>,"=4"; -+ chd_cfg = <&channel_d>,"reg:0"; -+ chd_gain = <&channel_d>,"ti,gain:0"; -+ chd_datarate = <&channel_d>,"ti,datarate:0"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.9/0194-clk-bcm2835-Correct-the-prediv-logic.patch b/target/linux/brcm2708/patches-4.9/0194-clk-bcm2835-Correct-the-prediv-logic.patch deleted file mode 100644 index c81194fe69e1..000000000000 --- a/target/linux/brcm2708/patches-4.9/0194-clk-bcm2835-Correct-the-prediv-logic.patch +++ /dev/null @@ -1,27 +0,0 @@ -From a9913dccdeaabca37343d0d8b0a48cda1e434e02 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 1 Mar 2017 16:06:53 +0000 -Subject: [PATCH] clk-bcm2835: Correct the prediv logic - -If a clock has the prediv flag set, both the integer and fractional -parts must be scaled when calculating the resulting frequency. - -Signed-off-by: Phil Elwell ---- - drivers/clk/bcm/clk-bcm2835.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -616,8 +616,10 @@ static unsigned long bcm2835_pll_get_rat - using_prediv = cprman_read(cprman, data->ana_reg_base + 4) & - data->ana->fb_prediv_mask; - -- if (using_prediv) -+ if (using_prediv) { - ndiv *= 2; -+ fdiv *= 2; -+ } - - return bcm2835_pll_rate_from_divisors(parent_rate, ndiv, fdiv, pdiv); - } diff --git a/target/linux/brcm2708/patches-4.9/0195-amba_pl011-Round-input-clock-up.patch b/target/linux/brcm2708/patches-4.9/0195-amba_pl011-Round-input-clock-up.patch deleted file mode 100644 index 2bd501d8db58..000000000000 --- a/target/linux/brcm2708/patches-4.9/0195-amba_pl011-Round-input-clock-up.patch +++ /dev/null @@ -1,86 +0,0 @@ -From 0360d687752df3c5546dd1534904a6e0168b6360 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 1 Mar 2017 16:07:39 +0000 -Subject: [PATCH] amba_pl011: Round input clock up - -The UART clock is initialised to be as close to the requested -frequency as possible without exceeding it. Now that there is a -clock manager that returns the actual frequencies, an expected -48MHz clock is reported as 47999625. If the requested baudrate -== requested clock/16, there is no headroom and the slight -reduction in actual clock rate results in failure. - -Detect cases where it looks like a "round" clock was chosen and -adjust the reported clock to match that "round" value. As the -code comment says: - -/* - * If increasing a clock by less than 0.1% changes it - * from ..999.. to ..000.., round up. - */ - -Signed-off-by: Phil Elwell ---- - drivers/tty/serial/amba-pl011.c | 23 +++++++++++++++++++++-- - 1 file changed, 21 insertions(+), 2 deletions(-) - ---- a/drivers/tty/serial/amba-pl011.c -+++ b/drivers/tty/serial/amba-pl011.c -@@ -1646,6 +1646,23 @@ static void pl011_put_poll_char(struct u - - #endif /* CONFIG_CONSOLE_POLL */ - -+unsigned long pl011_clk_round(unsigned long clk) -+{ -+ unsigned long scaler; -+ -+ /* -+ * If increasing a clock by less than 0.1% changes it -+ * from ..999.. to ..000.., round up. -+ */ -+ scaler = 1; -+ while (scaler * 100000 < clk) -+ scaler *= 10; -+ if ((clk + scaler - 1)/scaler % 1000 == 0) -+ clk = (clk/scaler + 1) * scaler; -+ -+ return clk; -+} -+ - static int pl011_hwinit(struct uart_port *port) - { - struct uart_amba_port *uap = -@@ -1662,7 +1679,7 @@ static int pl011_hwinit(struct uart_port - if (retval) - return retval; - -- uap->port.uartclk = clk_get_rate(uap->clk); -+ uap->port.uartclk = pl011_clk_round(clk_get_rate(uap->clk)); - - /* Clear pending error and receive interrupts */ - pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS | -@@ -2300,7 +2317,7 @@ static int __init pl011_console_setup(st - plat->init(); - } - -- uap->port.uartclk = clk_get_rate(uap->clk); -+ uap->port.uartclk = pl011_clk_round(clk_get_rate(uap->clk)); - - if (uap->vendor->fixed_options) { - baud = uap->fixed_baud; -@@ -2372,6 +2389,7 @@ static struct uart_driver amba_reg = { - .cons = AMBA_CONSOLE, - }; - -+#if 0 - static int pl011_probe_dt_alias(int index, struct device *dev) - { - struct device_node *np; -@@ -2403,6 +2421,7 @@ static int pl011_probe_dt_alias(int inde - - return ret; - } -+#endif - - /* unregisters the driver also if no more ports are left */ - static void pl011_unregister_port(struct uart_amba_port *uap) diff --git a/target/linux/brcm2708/patches-4.9/0196-BCM2835-V4L2-Ensure-H264-header-bytes-get-a-sensible.patch b/target/linux/brcm2708/patches-4.9/0196-BCM2835-V4L2-Ensure-H264-header-bytes-get-a-sensible.patch deleted file mode 100644 index df8d4b4a4fe0..000000000000 --- a/target/linux/brcm2708/patches-4.9/0196-BCM2835-V4L2-Ensure-H264-header-bytes-get-a-sensible.patch +++ /dev/null @@ -1,87 +0,0 @@ -From 02ceda02182f6cb538be397b8d8f34b64a254559 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 13 Feb 2017 11:10:50 +0000 -Subject: [PATCH] BCM2835-V4L2: Ensure H264 header bytes get a sensible - timestamp - -H264 header come off VC with 0 timestamps, which means they get a -strange timestamp when processed with VC/kernel start times, -particularly if used with the inline header option. -Remember the last frame timestamp and use that if set, or otherwise -use the kernel start time. - -https://github.com/raspberrypi/linux/issues/1836 - -Signed-off-by: Dave Stevenson ---- - drivers/media/platform/bcm2835/bcm2835-camera.c | 30 ++++++++++++++++++++++--- - drivers/media/platform/bcm2835/bcm2835-camera.h | 2 ++ - 2 files changed, 29 insertions(+), 3 deletions(-) - ---- a/drivers/media/platform/bcm2835/bcm2835-camera.c -+++ b/drivers/media/platform/bcm2835/bcm2835-camera.c -@@ -356,8 +356,13 @@ static void buffer_cb(struct vchiq_mmal_ - } - } else { - if (dev->capture.frame_count) { -- if (dev->capture.vc_start_timestamp != -1 && -- pts != 0) { -+ if (dev->capture.vc_start_timestamp == -1) { -+ buf->vb.vb2_buf.timestamp = ktime_get_ns(); -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Buffer time set as current time - %lld", -+ buf->vb.vb2_buf.timestamp); -+ -+ } else if(pts != 0) { - struct timeval timestamp; - s64 runtime_us = pts - - dev->capture.vc_start_timestamp; -@@ -390,10 +395,27 @@ static void buffer_cb(struct vchiq_mmal_ - buf->vb.vb2_buf.timestamp = timestamp.tv_sec * 1000000000ULL + - timestamp.tv_usec * 1000ULL; - } else { -- buf->vb.vb2_buf.timestamp = ktime_get_ns(); -+ if (dev->capture.last_timestamp) { -+ buf->vb.vb2_buf.timestamp = dev->capture.last_timestamp; -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Buffer time set as last timestamp - %lld", -+ buf->vb.vb2_buf.timestamp); -+ } -+ else { -+ buf->vb.vb2_buf.timestamp = -+ dev->capture.kernel_start_ts.tv_sec * 1000000000ULL + -+ dev->capture.kernel_start_ts.tv_usec * 1000ULL; -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Buffer time set as start timestamp - %lld", -+ buf->vb.vb2_buf.timestamp); -+ } - } -+ dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; - - vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); -+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, -+ "Buffer has ts %llu", -+ dev->capture.last_timestamp); - vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); - - if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && -@@ -559,6 +581,8 @@ static int start_streaming(struct vb2_qu - "Start time %lld size %d\n", - dev->capture.vc_start_timestamp, parameter_size); - -+ dev->capture.last_timestamp = 0; -+ - v4l2_get_timestamp(&dev->capture.kernel_start_ts); - - /* enable the camera port */ ---- a/drivers/media/platform/bcm2835/bcm2835-camera.h -+++ b/drivers/media/platform/bcm2835/bcm2835-camera.h -@@ -93,6 +93,8 @@ struct bm2835_mmal_dev { - s64 vc_start_timestamp; - /* Kernel start timestamp for streaming */ - struct timeval kernel_start_ts; -+ /* Timestamp of last frame */ -+ u64 last_timestamp; - - struct vchiq_mmal_port *port; /* port being used for capture */ - /* camera port being used for capture */ diff --git a/target/linux/brcm2708/patches-4.9/0197-BCM2835-V4L2-Correctly-denote-key-frames-in-encoded-.patch b/target/linux/brcm2708/patches-4.9/0197-BCM2835-V4L2-Correctly-denote-key-frames-in-encoded-.patch deleted file mode 100644 index 4b375abad9a1..000000000000 --- a/target/linux/brcm2708/patches-4.9/0197-BCM2835-V4L2-Correctly-denote-key-frames-in-encoded-.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 9136b739f4ecc714db0431a3e0f4f4d9b12ab670 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 13 Feb 2017 13:11:41 +0000 -Subject: [PATCH] BCM2835-V4L2: Correctly denote key frames in encoded data - -Forward MMAL key frame flags to the V4L2 buffers. - -Signed-off-by: Dave Stevenson ---- - drivers/media/platform/bcm2835/bcm2835-camera.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/media/platform/bcm2835/bcm2835-camera.c -+++ b/drivers/media/platform/bcm2835/bcm2835-camera.c -@@ -413,6 +413,9 @@ static void buffer_cb(struct vchiq_mmal_ - dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; - - vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); -+ if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) -+ buf->vb.flags |= V4L2_BUF_FLAG_KEYFRAME; -+ - v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, - "Buffer has ts %llu", - dev->capture.last_timestamp); diff --git a/target/linux/brcm2708/patches-4.9/0198-bcm2835-gpio-exp-Driver-for-GPIO-expander-via-mailbo.patch b/target/linux/brcm2708/patches-4.9/0198-bcm2835-gpio-exp-Driver-for-GPIO-expander-via-mailbo.patch deleted file mode 100644 index 3d09d1dc3f56..000000000000 --- a/target/linux/brcm2708/patches-4.9/0198-bcm2835-gpio-exp-Driver-for-GPIO-expander-via-mailbo.patch +++ /dev/null @@ -1,405 +0,0 @@ -From 2f8f62fbd42a55825da437faba4b6164f2e0bee9 Mon Sep 17 00:00:00 2001 -From: Dave Stevenson -Date: Mon, 20 Feb 2017 17:01:21 +0000 -Subject: [PATCH] bcm2835-gpio-exp: Driver for GPIO expander via mailbox - service - -Pi3 and Compute Module 3 have a GPIO expander that the -VPU communicates with. -There is a mailbox service that now allows control of this -expander, so add a kernel driver that can make use of it. - -Pwr_led node added to device-tree for Pi3. - -Signed-off-by: Dave Stevenson ---- - arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 22 +++ - arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 10 +- - arch/arm/configs/bcm2709_defconfig | 1 + - drivers/gpio/Kconfig | 7 + - drivers/gpio/Makefile | 1 + - drivers/gpio/gpio-bcm-exp.c | 256 +++++++++++++++++++++++++++++ - include/soc/bcm2835/raspberrypi-firmware.h | 4 + - 7 files changed, 300 insertions(+), 1 deletion(-) - create mode 100644 drivers/gpio/gpio-bcm-exp.c - ---- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -@@ -96,6 +96,14 @@ - firmware = <&firmware>; - status = "okay"; - }; -+ -+ expgpio: expgpio { -+ compatible = "brcm,bcm2835-expgpio"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ firmware = <&firmware>; -+ status = "okay"; -+ }; - }; - - &fb { -@@ -163,6 +171,16 @@ - linux,default-trigger = "mmc0"; - gpios = <&virtgpio 0 0>; - }; -+ -+ pwr_led: pwr { -+ label = "led1"; -+ linux,default-trigger = "input"; -+ gpios = <&expgpio 7 GPIO_ACTIVE_LOW>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>; - }; - - &audio { -@@ -193,6 +211,10 @@ - act_led_activelow = <&act_led>,"gpios:8"; - act_led_trigger = <&act_led>,"linux,default-trigger"; - -+ pwr_led_gpio = <&pwr_led>,"gpios:4"; -+ pwr_led_activelow = <&pwr_led>,"gpios:8"; -+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; -+ - audio = <&audio>,"status"; - watchdog = <&watchdog>,"status"; - random = <&random>,"status"; ---- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts -@@ -65,6 +65,14 @@ - firmware = <&firmware>; - status = "okay"; - }; -+ -+ expgpio: expgpio { -+ compatible = "brcm,bcm2835-expgpio"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ firmware = <&firmware>; -+ status = "okay"; -+ }; - }; - - &fb { -@@ -123,7 +131,7 @@ - }; - - &hdmi { -- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+ hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>; - }; - - &audio { ---- a/arch/arm/configs/bcm2709_defconfig -+++ b/arch/arm/configs/bcm2709_defconfig -@@ -625,6 +625,7 @@ CONFIG_PPS=m - CONFIG_PPS_CLIENT_LDISC=m - CONFIG_PPS_CLIENT_GPIO=m - CONFIG_GPIO_SYSFS=y -+CONFIG_GPIO_BCM_EXP=y - CONFIG_GPIO_BCM_VIRT=y - CONFIG_GPIO_ARIZONA=m - CONFIG_GPIO_STMPE=y ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -128,6 +128,13 @@ config GPIO_AXP209 - help - Say yes to enable GPIO support for the AXP209 PMIC - -+config GPIO_BCM_EXP -+ bool "Broadcom Exp GPIO" -+ depends on OF_GPIO && RASPBERRYPI_FIRMWARE && (ARCH_BCM2835 || COMPILE_TEST) -+ help -+ Turn on GPIO support for Broadcom chips using the firmware mailbox -+ to communicate with VideoCore on BCM283x chips. -+ - config GPIO_BCM_KONA - bool "Broadcom Kona GPIO" - depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST) ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -30,6 +30,7 @@ obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizo - obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o - obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o - obj-$(CONFIG_GPIO_AXP209) += gpio-axp209.o -+obj-$(CONFIG_GPIO_BCM_EXP) += gpio-bcm-exp.o - obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o - obj-$(CONFIG_GPIO_BCM_VIRT) += gpio-bcm-virt.o - obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o ---- /dev/null -+++ b/drivers/gpio/gpio-bcm-exp.c -@@ -0,0 +1,256 @@ -+/* -+ * Broadcom expander GPIO driver -+ * -+ * Uses the firmware mailbox service to communicate with the -+ * GPIO expander on the VPU. -+ * -+ * Copyright (C) 2017 Raspberry Pi Trading Ltd. -+ * -+ * Author: Dave Stevenson -+ * Based on gpio-bcm-virt.c by Dom Cobley -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define MODULE_NAME "brcmexp-gpio" -+#define NUM_GPIO 8 -+ -+struct brcmexp_gpio { -+ struct gpio_chip gc; -+ struct device *dev; -+ struct rpi_firmware *fw; -+}; -+ -+struct gpio_set_config { -+ u32 gpio, direction, polarity, term_en, term_pull_up, state; -+}; -+ -+struct gpio_get_config { -+ u32 gpio, direction, polarity, term_en, term_pull_up; -+}; -+ -+struct gpio_get_set_state { -+ u32 gpio, state; -+}; -+ -+static int brcmexp_gpio_get_polarity(struct gpio_chip *gc, unsigned int off) -+{ -+ struct brcmexp_gpio *gpio; -+ struct gpio_get_config get; -+ int ret; -+ -+ gpio = container_of(gc, struct brcmexp_gpio, gc); -+ -+ get.gpio = off + gpio->gc.base; /* GPIO to update */ -+ -+ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_CONFIG, -+ &get, sizeof(get)); -+ if (ret) { -+ dev_err(gpio->dev, -+ "Failed to get GPIO %u config (%d)\n", off, ret); -+ return ret; -+ } -+ return get.polarity; -+} -+ -+static int brcmexp_gpio_dir_in(struct gpio_chip *gc, unsigned int off) -+{ -+ struct brcmexp_gpio *gpio; -+ struct gpio_set_config set_in; -+ int ret; -+ -+ gpio = container_of(gc, struct brcmexp_gpio, gc); -+ -+ set_in.gpio = off + gpio->gc.base; /* GPIO to update */ -+ set_in.direction = 0; /* Input */ -+ set_in.polarity = brcmexp_gpio_get_polarity(gc, off); -+ /* Retain existing setting */ -+ set_in.term_en = 0; /* termination disabled */ -+ set_in.term_pull_up = 0; /* n/a as termination disabled */ -+ set_in.state = 0; /* n/a as configured as an input */ -+ -+ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_CONFIG, -+ &set_in, sizeof(set_in)); -+ if (ret) { -+ dev_err(gpio->dev, -+ "Failed to set GPIO %u to input (%d)\n", -+ off, ret); -+ return ret; -+ } -+ return 0; -+} -+ -+static int brcmexp_gpio_dir_out(struct gpio_chip *gc, unsigned int off, int val) -+{ -+ struct brcmexp_gpio *gpio; -+ struct gpio_set_config set_out; -+ int ret; -+ -+ gpio = container_of(gc, struct brcmexp_gpio, gc); -+ -+ set_out.gpio = off + gpio->gc.base; /* GPIO to update */ -+ set_out.direction = 1; /* Output */ -+ set_out.polarity = brcmexp_gpio_get_polarity(gc, off); -+ /* Retain existing setting */ -+ set_out.term_en = 0; /* n/a as an output */ -+ set_out.term_pull_up = 0; /* n/a as termination disabled */ -+ set_out.state = val; /* Output state */ -+ -+ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_CONFIG, -+ &set_out, sizeof(set_out)); -+ if (ret) { -+ dev_err(gpio->dev, -+ "Failed to set GPIO %u to output (%d)\n", off, ret); -+ return ret; -+ } -+ return 0; -+} -+ -+static int brcmexp_gpio_get_direction(struct gpio_chip *gc, unsigned int off) -+{ -+ struct brcmexp_gpio *gpio; -+ struct gpio_get_config get; -+ int ret; -+ -+ gpio = container_of(gc, struct brcmexp_gpio, gc); -+ -+ get.gpio = off + gpio->gc.base; /* GPIO to update */ -+ -+ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_CONFIG, -+ &get, sizeof(get)); -+ if (ret) { -+ dev_err(gpio->dev, -+ "Failed to get GPIO %u config (%d)\n", off, ret); -+ return ret; -+ } -+ return get.direction ? GPIOF_DIR_OUT : GPIOF_DIR_IN; -+} -+ -+static int brcmexp_gpio_get(struct gpio_chip *gc, unsigned int off) -+{ -+ struct brcmexp_gpio *gpio; -+ struct gpio_get_set_state get; -+ int ret; -+ -+ gpio = container_of(gc, struct brcmexp_gpio, gc); -+ -+ get.gpio = off + gpio->gc.base; /* GPIO to update */ -+ get.state = 0; /* storage for returned value */ -+ -+ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_STATE, -+ &get, sizeof(get)); -+ if (ret) { -+ dev_err(gpio->dev, -+ "Failed to get GPIO %u state (%d)\n", off, ret); -+ return ret; -+ } -+ return !!get.state; -+} -+ -+static void brcmexp_gpio_set(struct gpio_chip *gc, unsigned int off, int val) -+{ -+ struct brcmexp_gpio *gpio; -+ struct gpio_get_set_state set; -+ int ret; -+ -+ gpio = container_of(gc, struct brcmexp_gpio, gc); -+ -+ off += gpio->gc.base; -+ -+ set.gpio = off + gpio->gc.base; /* GPIO to update */ -+ set.state = val; /* Output state */ -+ -+ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_STATE, -+ &set, sizeof(set)); -+ if (ret) -+ dev_err(gpio->dev, -+ "Failed to set GPIO %u state (%d)\n", off, ret); -+} -+ -+static int brcmexp_gpio_probe(struct platform_device *pdev) -+{ -+ int err = 0; -+ struct device *dev = &pdev->dev; -+ struct device_node *np = dev->of_node; -+ struct device_node *fw_node; -+ struct rpi_firmware *fw; -+ struct brcmexp_gpio *ucb; -+ -+ fw_node = of_parse_phandle(np, "firmware", 0); -+ if (!fw_node) { -+ dev_err(dev, "Missing firmware node\n"); -+ return -ENOENT; -+ } -+ -+ fw = rpi_firmware_get(fw_node); -+ if (!fw) -+ return -EPROBE_DEFER; -+ -+ ucb = devm_kzalloc(dev, sizeof(*ucb), GFP_KERNEL); -+ if (!ucb) -+ return -EINVAL; -+ -+ ucb->fw = fw; -+ ucb->dev = dev; -+ ucb->gc.label = MODULE_NAME; -+ ucb->gc.owner = THIS_MODULE; -+ ucb->gc.of_node = np; -+ ucb->gc.base = 128; -+ ucb->gc.ngpio = NUM_GPIO; -+ -+ ucb->gc.direction_input = brcmexp_gpio_dir_in; -+ ucb->gc.direction_output = brcmexp_gpio_dir_out; -+ ucb->gc.get_direction = brcmexp_gpio_get_direction; -+ ucb->gc.get = brcmexp_gpio_get; -+ ucb->gc.set = brcmexp_gpio_set; -+ ucb->gc.can_sleep = true; -+ -+ err = gpiochip_add(&ucb->gc); -+ if (err) -+ return err; -+ -+ platform_set_drvdata(pdev, ucb); -+ -+ return 0; -+} -+ -+static int brcmexp_gpio_remove(struct platform_device *pdev) -+{ -+ struct brcmexp_gpio *ucb = platform_get_drvdata(pdev); -+ -+ gpiochip_remove(&ucb->gc); -+ -+ return 0; -+} -+ -+static const struct of_device_id __maybe_unused brcmexp_gpio_ids[] = { -+ { .compatible = "brcm,bcm2835-expgpio" }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, brcmexp_gpio_ids); -+ -+static struct platform_driver brcmexp_gpio_driver = { -+ .driver = { -+ .name = MODULE_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(brcmexp_gpio_ids), -+ }, -+ .probe = brcmexp_gpio_probe, -+ .remove = brcmexp_gpio_remove, -+}; -+module_platform_driver(brcmexp_gpio_driver); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Dave Stevenson "); -+MODULE_DESCRIPTION("brcm-exp GPIO driver"); -+MODULE_ALIAS("platform:brcmexp-gpio"); ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -83,7 +83,11 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_SET_TURBO = 0x00038009, - RPI_FIRMWARE_SET_CUSTOMER_OTP = 0x00038021, - RPI_FIRMWARE_SET_DOMAIN_STATE = 0x00038030, -+ RPI_FIRMWARE_GET_GPIO_STATE = 0x00030041, -+ RPI_FIRMWARE_SET_GPIO_STATE = 0x00038041, - RPI_FIRMWARE_SET_SDHOST_CLOCK = 0x00038042, -+ RPI_FIRMWARE_GET_GPIO_CONFIG = 0x00030043, -+ RPI_FIRMWARE_SET_GPIO_CONFIG = 0x00038043, - - /* Dispmanx TAGS */ - RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001, diff --git a/target/linux/brcm2708/patches-4.9/0199-BCM270X_DT-Add-bcm2708-rpi-0-w.dts.patch b/target/linux/brcm2708/patches-4.9/0199-BCM270X_DT-Add-bcm2708-rpi-0-w.dts.patch deleted file mode 100644 index c3a87517e2bb..000000000000 --- a/target/linux/brcm2708/patches-4.9/0199-BCM270X_DT-Add-bcm2708-rpi-0-w.dts.patch +++ /dev/null @@ -1,225 +0,0 @@ -From 41620ad7f4b059be162f615a7be423df78406d29 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 24 May 2016 16:30:05 +0100 -Subject: [PATCH] BCM270X_DT: Add bcm2708-rpi-0-w.dts - -Add DT support for the Pi Zero W. N.B. It will not be loaded -automatically without a corresponding change to the firmware. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm2708-rpi-0-w.dts | 197 ++++++++++++++++++++++++++++++++++ - 2 files changed, 198 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm2708-rpi-0-w.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ - bcm2708-rpi-b.dtb \ - bcm2708-rpi-b-plus.dtb \ - bcm2708-rpi-cm.dtb \ -+ bcm2708-rpi-0-w.dtb \ - bcm2709-rpi-2-b.dtb \ - bcm2710-rpi-3-b.dtb \ - bcm2710-rpi-cm3.dtb ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2708-rpi-0-w.dts -@@ -0,0 +1,197 @@ -+/dts-v1/; -+ -+#include "bcm2708.dtsi" -+ -+/ { -+ model = "Raspberry Pi Zero W"; -+}; -+ -+&gpio { -+ sdhost_pins: sdhost_pins { -+ brcm,pins = <48 49 50 51 52 53>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ sdio_pins: sdio_pins { -+ brcm,pins = <34 35 36 37 38 39>; -+ brcm,function = <7>; /* ALT3 = SD1 */ -+ brcm,pull = <0 2 2 2 2 2>; -+ }; -+ -+ bt_pins: bt_pins { -+ brcm,pins = <43>; -+ brcm,function = <4>; /* alt0:GPCLK2 */ -+ brcm,pull = <0>; /* none */ -+ }; -+ -+ uart0_pins: uart0_pins { -+ brcm,pins = <30 31 32 33>; -+ brcm,function = <7>; /* alt3=UART0 */ -+ brcm,pull = <2 0 0 2>; /* up none none up */ -+ }; -+ -+ uart1_pins: uart1_pins { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <>; -+ brcm,function = <>; -+ }; -+}; -+ -+&sdhost { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdhost_pins>; -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&mmc { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdio_pins>; -+ non-removable; -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&fb { -+ status = "okay"; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins &bt_pins>; -+ status = "okay"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <500000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ #sound-dai-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&random { -+ status = "okay"; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 47 0>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ chosen { -+ bootargs = "8250.nr_uarts=1"; -+ }; -+}; -+ -+/ { -+ __overrides__ { -+ uart0 = <&uart0>,"status"; -+ uart1 = <&uart1>,"status"; -+ i2s = <&i2s>,"status"; -+ spi = <&spi0>,"status"; -+ i2c0 = <&i2c0>,"status"; -+ i2c1 = <&i2c1>,"status"; -+ i2c2_iknowwhatimdoing = <&i2c2>,"status"; -+ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; -+ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; -+ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; -+ -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ -+ audio = <&audio>,"status"; -+ watchdog = <&watchdog>,"status"; -+ random = <&random>,"status"; -+ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; -+ sd_force_pio = <&sdhost>,"brcm,force-pio?"; -+ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; -+ sd_debug = <&sdhost>,"brcm,debug"; -+ }; -+}; diff --git a/target/linux/brcm2708/patches-4.9/1000-mfd-rpisense-disable.patch b/target/linux/brcm2708/patches-4.9/1000-mfd-rpisense-disable.patch deleted file mode 100644 index 164e8447f6c5..000000000000 --- a/target/linux/brcm2708/patches-4.9/1000-mfd-rpisense-disable.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/mfd/Kconfig -+++ b/drivers/mfd/Kconfig -@@ -13,6 +13,7 @@ config MFD_CORE - config MFD_RPISENSE_CORE - tristate "Raspberry Pi Sense HAT core functions" - depends on I2C -+ depends on BROKEN - select MFD_CORE - help - This is the core driver for the Raspberry Pi Sense HAT. This provides diff --git a/target/linux/brcm2708/patches-4.9/1001-sound-soc-rpi-cirrus-disable.patch b/target/linux/brcm2708/patches-4.9/1001-sound-soc-rpi-cirrus-disable.patch deleted file mode 100644 index 87a57a831d7d..000000000000 --- a/target/linux/brcm2708/patches-4.9/1001-sound-soc-rpi-cirrus-disable.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -48,6 +48,7 @@ config SND_BCM2708_SOC_HIFIBERRY_AMP - config SND_BCM2708_SOC_RPI_CIRRUS - tristate "Support for Cirrus Logic Audio Card" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ depends on BROKEN - select SND_SOC_WM5102 - select SND_SOC_WM8804 - help diff --git a/target/linux/brcm2708/patches-4.9/950-0001-smsx95xx-fix-crimes-against-truesize.patch b/target/linux/brcm2708/patches-4.9/950-0001-smsx95xx-fix-crimes-against-truesize.patch new file mode 100644 index 000000000000..a5737e3c8356 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0001-smsx95xx-fix-crimes-against-truesize.patch @@ -0,0 +1,47 @@ +From c01a3230d8cdd396dcec2619646f6cf2753481d8 Mon Sep 17 00:00:00 2001 +From: Steve Glendinning +Date: Thu, 19 Feb 2015 18:47:12 +0000 +Subject: [PATCH] smsx95xx: fix crimes against truesize + +smsc95xx is adjusting truesize when it shouldn't, and following a recent patch from Eric this is now triggering warnings. + +This patch stops smsc95xx from changing truesize. + +Signed-off-by: Steve Glendinning +--- + drivers/net/usb/smsc95xx.c | 10 ++++++++-- + 1 file changed, 8 insertions(+), 2 deletions(-) + +--- a/drivers/net/usb/smsc95xx.c ++++ b/drivers/net/usb/smsc95xx.c +@@ -82,6 +82,10 @@ static bool turbo_mode = true; + module_param(turbo_mode, bool, 0644); + MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction"); + ++static bool truesize_mode = false; ++module_param(truesize_mode, bool, 0644); ++MODULE_PARM_DESC(truesize_mode, "Report larger truesize value"); ++ + static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index, + u32 *data, int in_pm) + { +@@ -1951,7 +1955,8 @@ static int smsc95xx_rx_fixup(struct usbn + if (dev->net->features & NETIF_F_RXCSUM) + smsc95xx_rx_csum_offload(skb); + skb_trim(skb, skb->len - 4); /* remove fcs */ +- skb->truesize = size + sizeof(struct sk_buff); ++ if (truesize_mode) ++ skb->truesize = size + sizeof(struct sk_buff); + + return 1; + } +@@ -1969,7 +1974,8 @@ static int smsc95xx_rx_fixup(struct usbn + if (dev->net->features & NETIF_F_RXCSUM) + smsc95xx_rx_csum_offload(ax_skb); + skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */ +- ax_skb->truesize = size + sizeof(struct sk_buff); ++ if (truesize_mode) ++ ax_skb->truesize = size + sizeof(struct sk_buff); + + usbnet_skb_return(dev, ax_skb); + } diff --git a/target/linux/brcm2708/patches-4.9/950-0002-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch b/target/linux/brcm2708/patches-4.9/950-0002-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch new file mode 100644 index 000000000000..fc7ac4d8b9b9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0002-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch @@ -0,0 +1,43 @@ +From 8272cd893c3bca2f047dcf06ae11d9ada6d26f33 Mon Sep 17 00:00:00 2001 +From: Sam Nazarko +Date: Fri, 1 Apr 2016 17:27:21 +0100 +Subject: [PATCH] smsc95xx: Experimental: Enable turbo_mode and packetsize=2560 + by default + +See: http://forum.kodi.tv/showthread.php?tid=285288 +--- + drivers/net/usb/smsc95xx.c | 14 +++++++++----- + 1 file changed, 9 insertions(+), 5 deletions(-) + +--- a/drivers/net/usb/smsc95xx.c ++++ b/drivers/net/usb/smsc95xx.c +@@ -86,6 +86,10 @@ static bool truesize_mode = false; + module_param(truesize_mode, bool, 0644); + MODULE_PARM_DESC(truesize_mode, "Report larger truesize value"); + ++static int packetsize = 2560; ++module_param(packetsize, int, 0644); ++MODULE_PARM_DESC(packetsize, "Override the RX URB packet size"); ++ + static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index, + u32 *data, int in_pm) + { +@@ -1106,13 +1110,13 @@ static int smsc95xx_reset(struct usbnet + + if (!turbo_mode) { + burst_cap = 0; +- dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE; ++ dev->rx_urb_size = packetsize ? packetsize : MAX_SINGLE_PACKET_SIZE; + } else if (dev->udev->speed == USB_SPEED_HIGH) { +- burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE; +- dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE; ++ dev->rx_urb_size = packetsize ? packetsize : DEFAULT_HS_BURST_CAP_SIZE; ++ burst_cap = dev->rx_urb_size / HS_USB_PKT_SIZE; + } else { +- burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE; +- dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE; ++ dev->rx_urb_size = packetsize ? packetsize : DEFAULT_FS_BURST_CAP_SIZE; ++ burst_cap = dev->rx_urb_size / FS_USB_PKT_SIZE; + } + + netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld\n", diff --git a/target/linux/brcm2708/patches-4.9/950-0003-Allow-mac-address-to-be-set-in-smsc95xx.patch b/target/linux/brcm2708/patches-4.9/950-0003-Allow-mac-address-to-be-set-in-smsc95xx.patch new file mode 100644 index 000000000000..8075dff2f343 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0003-Allow-mac-address-to-be-set-in-smsc95xx.patch @@ -0,0 +1,96 @@ +From 2e70eba32ed21b1a909b9ae6a06b3384a33fc5a4 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Tue, 26 Mar 2013 17:26:38 +0000 +Subject: [PATCH] Allow mac address to be set in smsc95xx + +Signed-off-by: popcornmix +--- + drivers/net/usb/smsc95xx.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 56 insertions(+) + +--- a/drivers/net/usb/smsc95xx.c ++++ b/drivers/net/usb/smsc95xx.c +@@ -60,6 +60,7 @@ + #define SUSPEND_SUSPEND3 (0x08) + #define SUSPEND_ALLMODES (SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \ + SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3) ++#define MAC_ADDR_LEN (6) + + #define CARRIER_CHECK_DELAY (2 * HZ) + +@@ -90,6 +91,10 @@ static int packetsize = 2560; + module_param(packetsize, int, 0644); + MODULE_PARM_DESC(packetsize, "Override the RX URB packet size"); + ++static char *macaddr = ":"; ++module_param(macaddr, charp, 0); ++MODULE_PARM_DESC(macaddr, "MAC address"); ++ + static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index, + u32 *data, int in_pm) + { +@@ -918,6 +923,53 @@ static int smsc95xx_ioctl(struct net_dev + return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); + } + ++/* Check the macaddr module parameter for a MAC address */ ++static int smsc95xx_is_macaddr_param(struct usbnet *dev, u8 *dev_mac) ++{ ++ int i, j, got_num, num; ++ u8 mtbl[MAC_ADDR_LEN]; ++ ++ if (macaddr[0] == ':') ++ return 0; ++ ++ i = 0; ++ j = 0; ++ num = 0; ++ got_num = 0; ++ while (j < MAC_ADDR_LEN) { ++ if (macaddr[i] && macaddr[i] != ':') { ++ got_num++; ++ if ('0' <= macaddr[i] && macaddr[i] <= '9') ++ num = num * 16 + macaddr[i] - '0'; ++ else if ('A' <= macaddr[i] && macaddr[i] <= 'F') ++ num = num * 16 + 10 + macaddr[i] - 'A'; ++ else if ('a' <= macaddr[i] && macaddr[i] <= 'f') ++ num = num * 16 + 10 + macaddr[i] - 'a'; ++ else ++ break; ++ i++; ++ } else if (got_num == 2) { ++ mtbl[j++] = (u8) num; ++ num = 0; ++ got_num = 0; ++ i++; ++ } else { ++ break; ++ } ++ } ++ ++ if (j == MAC_ADDR_LEN) { ++ netif_dbg(dev, ifup, dev->net, "Overriding MAC address with: " ++ "%02x:%02x:%02x:%02x:%02x:%02x\n", mtbl[0], mtbl[1], mtbl[2], ++ mtbl[3], mtbl[4], mtbl[5]); ++ for (i = 0; i < MAC_ADDR_LEN; i++) ++ dev_mac[i] = mtbl[i]; ++ return 1; ++ } else { ++ return 0; ++ } ++} ++ + static void smsc95xx_init_mac_address(struct usbnet *dev) + { + const u8 *mac_addr; +@@ -939,6 +991,10 @@ static void smsc95xx_init_mac_address(st + } + } + ++ /* Check module parameters */ ++ if (smsc95xx_is_macaddr_param(dev, dev->net->dev_addr)) ++ return; ++ + /* no useful static MAC address found. generate a random one */ + eth_hw_addr_random(dev->net); + netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n"); diff --git a/target/linux/brcm2708/patches-4.9/950-0004-Protect-__release_resource-against-resources-without.patch b/target/linux/brcm2708/patches-4.9/950-0004-Protect-__release_resource-against-resources-without.patch new file mode 100644 index 000000000000..4b80ab0bec14 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0004-Protect-__release_resource-against-resources-without.patch @@ -0,0 +1,27 @@ +From 3115fe312a2c751954f1ab0f0ba07aea1c1c7d1b Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 13 Mar 2015 12:43:36 +0000 +Subject: [PATCH] Protect __release_resource against resources without parents + +Without this patch, removing a device tree overlay can crash here. + +Signed-off-by: Phil Elwell +--- + kernel/resource.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/kernel/resource.c ++++ b/kernel/resource.c +@@ -246,6 +246,12 @@ static int __release_resource(struct res + { + struct resource *tmp, **p, *chd; + ++ if (!old->parent) { ++ WARN(old->sibling, "sibling but no parent"); ++ if (old->sibling) ++ return -EINVAL; ++ return 0; ++ } + p = &old->parent->child; + for (;;) { + tmp = *p; diff --git a/target/linux/brcm2708/patches-4.9/950-0005-mm-Remove-the-PFN-busy-warning.patch b/target/linux/brcm2708/patches-4.9/950-0005-mm-Remove-the-PFN-busy-warning.patch new file mode 100644 index 000000000000..b271d2606d2a --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0005-mm-Remove-the-PFN-busy-warning.patch @@ -0,0 +1,25 @@ +From 55d0c167f73b9583357fc0af36d7a01666885e0e Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 18 Dec 2014 16:07:15 -0800 +Subject: [PATCH] mm: Remove the PFN busy warning + +See commit dae803e165a11bc88ca8dbc07a11077caf97bbcb -- the warning is +expected sometimes when using CMA. However, that commit still spams +my kernel log with these warnings. + +Signed-off-by: Eric Anholt +--- + mm/page_alloc.c | 2 -- + 1 file changed, 2 deletions(-) + +--- a/mm/page_alloc.c ++++ b/mm/page_alloc.c +@@ -7323,8 +7323,6 @@ int alloc_contig_range(unsigned long sta + + /* Make sure the range is really isolated. */ + if (test_pages_isolated(outer_start, end, false)) { +- pr_info("%s: [%lx, %lx) PFNs busy\n", +- __func__, outer_start, end); + ret = -EBUSY; + goto done; + } diff --git a/target/linux/brcm2708/patches-4.9/950-0006-irq-bcm2836-Prevent-spurious-interrupts-and-trap-the.patch b/target/linux/brcm2708/patches-4.9/950-0006-irq-bcm2836-Prevent-spurious-interrupts-and-trap-the.patch new file mode 100644 index 000000000000..5f5bd83600ae --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0006-irq-bcm2836-Prevent-spurious-interrupts-and-trap-the.patch @@ -0,0 +1,26 @@ +From 0badcb291f4fb5c3477c37b4ad4a0e27dd863272 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 4 Dec 2015 17:41:50 +0000 +Subject: [PATCH] irq-bcm2836: Prevent spurious interrupts, and trap them early + +The old arch-specific IRQ macros included a dsb to ensure the +write to clear the mailbox interrupt completed before returning +from the interrupt. The BCM2836 irqchip driver needs the same +precaution to avoid spurious interrupts. + +Spurious interrupts are still possible for other reasons, +though, so trap them early. +--- + drivers/irqchip/irq-bcm2836.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/irqchip/irq-bcm2836.c ++++ b/drivers/irqchip/irq-bcm2836.c +@@ -175,6 +175,7 @@ __exception_irq_entry bcm2836_arm_irqchi + u32 ipi = ffs(mbox_val) - 1; + + writel(1 << ipi, mailbox0); ++ dsb(sy); + handle_IPI(ipi, regs); + #endif + } else if (stat) { diff --git a/target/linux/brcm2708/patches-4.9/950-0007-irqchip-bcm2835-Add-FIQ-support.patch b/target/linux/brcm2708/patches-4.9/950-0007-irqchip-bcm2835-Add-FIQ-support.patch new file mode 100644 index 000000000000..56be640fd213 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0007-irqchip-bcm2835-Add-FIQ-support.patch @@ -0,0 +1,127 @@ +From 697bdb968798a2bb37c767582ba54fc6486c5de8 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= +Date: Fri, 12 Jun 2015 19:01:05 +0200 +Subject: [PATCH] irqchip: bcm2835: Add FIQ support +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add a duplicate irq range with an offset on the hwirq's so the +driver can detect that enable_fiq() is used. +Tested with downstream dwc_otg USB controller driver. + +Signed-off-by: Noralf Trønnes +Reviewed-by: Eric Anholt +Acked-by: Stephen Warren +--- + arch/arm/mach-bcm/Kconfig | 1 + + drivers/irqchip/irq-bcm2835.c | 51 ++++++++++++++++++++++++++++++++++++++----- + 2 files changed, 47 insertions(+), 5 deletions(-) + +--- a/arch/arm/mach-bcm/Kconfig ++++ b/arch/arm/mach-bcm/Kconfig +@@ -152,6 +152,7 @@ config ARCH_BCM2835 + select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 + select CLKSRC_OF + select BCM2835_TIMER ++ select FIQ + select PINCTRL + select PINCTRL_BCM2835 + help +--- a/drivers/irqchip/irq-bcm2835.c ++++ b/drivers/irqchip/irq-bcm2835.c +@@ -54,7 +54,7 @@ + #include + + /* Put the bank and irq (32 bits) into the hwirq */ +-#define MAKE_HWIRQ(b, n) ((b << 5) | (n)) ++#define MAKE_HWIRQ(b, n) (((b) << 5) | (n)) + #define HWIRQ_BANK(i) (i >> 5) + #define HWIRQ_BIT(i) BIT(i & 0x1f) + +@@ -70,9 +70,13 @@ + | SHORTCUT1_MASK | SHORTCUT2_MASK) + + #define REG_FIQ_CONTROL 0x0c ++#define REG_FIQ_ENABLE 0x80 ++#define REG_FIQ_DISABLE 0 + + #define NR_BANKS 3 + #define IRQS_PER_BANK 32 ++#define NUMBER_IRQS MAKE_HWIRQ(NR_BANKS, 0) ++#define FIQ_START (NR_IRQS_BANK0 + MAKE_HWIRQ(NR_BANKS - 1, 0)) + + static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 }; + static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 }; +@@ -97,14 +101,38 @@ static void __exception_irq_entry bcm283 + struct pt_regs *regs); + static void bcm2836_chained_handle_irq(struct irq_desc *desc); + ++static inline unsigned int hwirq_to_fiq(unsigned long hwirq) ++{ ++ hwirq -= NUMBER_IRQS; ++ /* ++ * The hwirq numbering used in this driver is: ++ * BASE (0-7) GPU1 (32-63) GPU2 (64-95). ++ * This differ from the one used in the FIQ register: ++ * GPU1 (0-31) GPU2 (32-63) BASE (64-71) ++ */ ++ if (hwirq >= 32) ++ return hwirq - 32; ++ ++ return hwirq + 64; ++} ++ + static void armctrl_mask_irq(struct irq_data *d) + { +- writel_relaxed(HWIRQ_BIT(d->hwirq), intc.disable[HWIRQ_BANK(d->hwirq)]); ++ if (d->hwirq >= NUMBER_IRQS) ++ writel_relaxed(REG_FIQ_DISABLE, intc.base + REG_FIQ_CONTROL); ++ else ++ writel_relaxed(HWIRQ_BIT(d->hwirq), ++ intc.disable[HWIRQ_BANK(d->hwirq)]); + } + + static void armctrl_unmask_irq(struct irq_data *d) + { +- writel_relaxed(HWIRQ_BIT(d->hwirq), intc.enable[HWIRQ_BANK(d->hwirq)]); ++ if (d->hwirq >= NUMBER_IRQS) ++ writel_relaxed(REG_FIQ_ENABLE | hwirq_to_fiq(d->hwirq), ++ intc.base + REG_FIQ_CONTROL); ++ else ++ writel_relaxed(HWIRQ_BIT(d->hwirq), ++ intc.enable[HWIRQ_BANK(d->hwirq)]); + } + + static struct irq_chip armctrl_chip = { +@@ -150,8 +178,9 @@ static int __init armctrl_of_init(struct + panic("%s: unable to map IC registers\n", + node->full_name); + +- intc.domain = irq_domain_add_linear(node, MAKE_HWIRQ(NR_BANKS, 0), +- &armctrl_ops, NULL); ++ intc.base = base; ++ intc.domain = irq_domain_add_linear(node, NUMBER_IRQS * 2, ++ &armctrl_ops, NULL); + if (!intc.domain) + panic("%s: unable to create IRQ domain\n", node->full_name); + +@@ -181,6 +210,18 @@ static int __init armctrl_of_init(struct + set_handle_irq(bcm2835_handle_irq); + } + ++ /* Make a duplicate irq range which is used to enable FIQ */ ++ for (b = 0; b < NR_BANKS; b++) { ++ for (i = 0; i < bank_irqs[b]; i++) { ++ irq = irq_create_mapping(intc.domain, ++ MAKE_HWIRQ(b, i) + NUMBER_IRQS); ++ BUG_ON(irq <= 0); ++ irq_set_chip(irq, &armctrl_chip); ++ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); ++ } ++ } ++ init_FIQ(FIQ_START); ++ + return 0; + } + diff --git a/target/linux/brcm2708/patches-4.9/950-0008-irqchip-irq-bcm2835-Add-2836-FIQ-support.patch b/target/linux/brcm2708/patches-4.9/950-0008-irqchip-irq-bcm2835-Add-2836-FIQ-support.patch new file mode 100644 index 000000000000..9c7515f4eba8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0008-irqchip-irq-bcm2835-Add-2836-FIQ-support.patch @@ -0,0 +1,99 @@ +From 78b53021ae0715792fb6a89bd9e7c02fc254be5c Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= +Date: Fri, 23 Oct 2015 16:26:55 +0200 +Subject: [PATCH] irqchip: irq-bcm2835: Add 2836 FIQ support +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: Noralf Trønnes +--- + drivers/irqchip/irq-bcm2835.c | 43 +++++++++++++++++++++++++++++++++++++++++-- + 1 file changed, 41 insertions(+), 2 deletions(-) + +--- a/drivers/irqchip/irq-bcm2835.c ++++ b/drivers/irqchip/irq-bcm2835.c +@@ -50,8 +50,11 @@ + #include + #include + #include ++#include ++#include + + #include ++#include + + /* Put the bank and irq (32 bits) into the hwirq */ + #define MAKE_HWIRQ(b, n) (((b) << 5) | (n)) +@@ -69,6 +72,9 @@ + #define BANK0_VALID_MASK (BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \ + | SHORTCUT1_MASK | SHORTCUT2_MASK) + ++#undef ARM_LOCAL_GPU_INT_ROUTING ++#define ARM_LOCAL_GPU_INT_ROUTING 0x0c ++ + #define REG_FIQ_CONTROL 0x0c + #define REG_FIQ_ENABLE 0x80 + #define REG_FIQ_DISABLE 0 +@@ -94,6 +100,7 @@ struct armctrl_ic { + void __iomem *enable[NR_BANKS]; + void __iomem *disable[NR_BANKS]; + struct irq_domain *domain; ++ struct regmap *local_regmap; + }; + + static struct armctrl_ic intc __read_mostly; +@@ -127,12 +134,35 @@ static void armctrl_mask_irq(struct irq_ + + static void armctrl_unmask_irq(struct irq_data *d) + { +- if (d->hwirq >= NUMBER_IRQS) ++ if (d->hwirq >= NUMBER_IRQS) { ++ if (num_online_cpus() > 1) { ++ unsigned int data; ++ int ret; ++ ++ if (!intc.local_regmap) { ++ pr_err("FIQ is disabled due to missing regmap\n"); ++ return; ++ } ++ ++ ret = regmap_read(intc.local_regmap, ++ ARM_LOCAL_GPU_INT_ROUTING, &data); ++ if (ret) { ++ pr_err("Failed to read int routing %d\n", ret); ++ return; ++ } ++ ++ data &= ~0xc; ++ data |= (1 << 2); ++ regmap_write(intc.local_regmap, ++ ARM_LOCAL_GPU_INT_ROUTING, data); ++ } ++ + writel_relaxed(REG_FIQ_ENABLE | hwirq_to_fiq(d->hwirq), + intc.base + REG_FIQ_CONTROL); +- else ++ } else { + writel_relaxed(HWIRQ_BIT(d->hwirq), + intc.enable[HWIRQ_BANK(d->hwirq)]); ++ } + } + + static struct irq_chip armctrl_chip = { +@@ -210,6 +240,15 @@ static int __init armctrl_of_init(struct + set_handle_irq(bcm2835_handle_irq); + } + ++ if (is_2836) { ++ intc.local_regmap = ++ syscon_regmap_lookup_by_compatible("brcm,bcm2836-arm-local"); ++ if (IS_ERR(intc.local_regmap)) { ++ pr_err("Failed to get local register map. FIQ is disabled for cpus > 1\n"); ++ intc.local_regmap = NULL; ++ } ++ } ++ + /* Make a duplicate irq range which is used to enable FIQ */ + for (b = 0; b < NR_BANKS; b++) { + for (i = 0; i < bank_irqs[b]; i++) { diff --git a/target/linux/brcm2708/patches-4.9/950-0009-spidev-Add-spidev-compatible-string-to-silence-warni.patch b/target/linux/brcm2708/patches-4.9/950-0009-spidev-Add-spidev-compatible-string-to-silence-warni.patch new file mode 100644 index 000000000000..0c5f0eef10c6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0009-spidev-Add-spidev-compatible-string-to-silence-warni.patch @@ -0,0 +1,20 @@ +From 21a313f8517a1be2b0962710ffe9ad94e7334ba1 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 14 Jul 2015 10:26:09 +0100 +Subject: [PATCH] spidev: Add "spidev" compatible string to silence warning + +See: https://github.com/raspberrypi/linux/issues/1054 +--- + drivers/spi/spidev.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/spi/spidev.c ++++ b/drivers/spi/spidev.c +@@ -697,6 +697,7 @@ static const struct of_device_id spidev_ + { .compatible = "rohm,dh2228fv" }, + { .compatible = "lineartechnology,ltc2488" }, + { .compatible = "siliconlabs,si3210" }, ++ { .compatible = "spidev" }, + {}, + }; + MODULE_DEVICE_TABLE(of, spidev_dt_ids); diff --git a/target/linux/brcm2708/patches-4.9/950-0010-serial-8250-Don-t-crash-when-nr_uarts-is-0.patch b/target/linux/brcm2708/patches-4.9/950-0010-serial-8250-Don-t-crash-when-nr_uarts-is-0.patch new file mode 100644 index 000000000000..447f1ce08593 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0010-serial-8250-Don-t-crash-when-nr_uarts-is-0.patch @@ -0,0 +1,20 @@ +From cc016c1876877aa42a84cc9c0c89af1b7410ff67 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 30 Jun 2015 14:12:42 +0100 +Subject: [PATCH] serial: 8250: Don't crash when nr_uarts is 0 + +--- + drivers/tty/serial/8250/8250_core.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/tty/serial/8250/8250_core.c ++++ b/drivers/tty/serial/8250/8250_core.c +@@ -509,6 +509,8 @@ static void __init serial8250_isa_init_p + + if (nr_uarts > UART_NR) + nr_uarts = UART_NR; ++ if (!nr_uarts) ++ return; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; diff --git a/target/linux/brcm2708/patches-4.9/950-0011-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch b/target/linux/brcm2708/patches-4.9/950-0011-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch new file mode 100644 index 000000000000..319eafbb1954 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0011-pinctrl-bcm2835-Set-base-to-0-give-expected-gpio-num.patch @@ -0,0 +1,21 @@ +From ea9188a48450ddab740fe5ffe6733fb2362ea5c8 Mon Sep 17 00:00:00 2001 +From: notro +Date: Thu, 10 Jul 2014 13:59:47 +0200 +Subject: [PATCH] pinctrl-bcm2835: Set base to 0 give expected gpio numbering + +Signed-off-by: Noralf Tronnes +--- + drivers/pinctrl/bcm/pinctrl-bcm2835.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c ++++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c +@@ -386,7 +386,7 @@ static struct gpio_chip bcm2835_gpio_chi + .get = bcm2835_gpio_get, + .set = bcm2835_gpio_set, + .to_irq = bcm2835_gpio_to_irq, +- .base = -1, ++ .base = 0, + .ngpio = BCM2835_NUM_GPIOS, + .can_sleep = false, + }; diff --git a/target/linux/brcm2708/patches-4.9/950-0012-pinctrl-bcm2835-Fix-interrupt-handling-for-GPIOs-28-.patch b/target/linux/brcm2708/patches-4.9/950-0012-pinctrl-bcm2835-Fix-interrupt-handling-for-GPIOs-28-.patch new file mode 100644 index 000000000000..b29aa8d7fbcf --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0012-pinctrl-bcm2835-Fix-interrupt-handling-for-GPIOs-28-.patch @@ -0,0 +1,146 @@ +From 6f92d02f7af5a9b5ed5ded7dbeb18bf2bbb2ad85 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 24 Feb 2015 13:40:50 +0000 +Subject: [PATCH] pinctrl-bcm2835: Fix interrupt handling for GPIOs 28-31 and + 46-53 + +Contrary to the documentation, the BCM2835 GPIO controller actually has +four interrupt lines - one each for the three IRQ groups and one common. Rather +confusingly, the GPIO interrupt groups don't correspond directly with the GPIO +control banks. Instead, GPIOs 0-27 generate IRQ GPIO0, 28-45 GPIO1 and +46-53 GPIO2. + +Awkwardly, the GPIOS for IRQ GPIO1 straddle two 32-entry GPIO banks, so it is +cleaner to split out a function to process the interrupts for a single GPIO +bank. + +This bug has only just been observed because GPIOs above 27 can only be +accessed on an old Raspberry Pi with the optional P5 header fitted, where +the pins are often used for I2S instead. +--- + drivers/pinctrl/bcm/pinctrl-bcm2835.c | 51 ++++++++++++++++++++++++++--------- + 1 file changed, 39 insertions(+), 12 deletions(-) + +--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c ++++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c +@@ -47,6 +47,7 @@ + #define MODULE_NAME "pinctrl-bcm2835" + #define BCM2835_NUM_GPIOS 54 + #define BCM2835_NUM_BANKS 2 ++#define BCM2835_NUM_IRQS 3 + + #define BCM2835_PIN_BITMAP_SZ \ + DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8) +@@ -88,13 +89,13 @@ enum bcm2835_pinconf_pull { + + struct bcm2835_gpio_irqdata { + struct bcm2835_pinctrl *pc; +- int bank; ++ int irqgroup; + }; + + struct bcm2835_pinctrl { + struct device *dev; + void __iomem *base; +- int irq[BCM2835_NUM_BANKS]; ++ int irq[BCM2835_NUM_IRQS]; + + /* note: locking assumes each bank will have its own unsigned long */ + unsigned long enabled_irq_map[BCM2835_NUM_BANKS]; +@@ -105,7 +106,7 @@ struct bcm2835_pinctrl { + struct gpio_chip gpio_chip; + struct pinctrl_gpio_range gpio_range; + +- struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_BANKS]; ++ struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_IRQS]; + spinlock_t irq_lock[BCM2835_NUM_BANKS]; + }; + +@@ -391,17 +392,16 @@ static struct gpio_chip bcm2835_gpio_chi + .can_sleep = false, + }; + +-static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id) ++static int bcm2835_gpio_irq_handle_bank(struct bcm2835_pinctrl *pc, ++ unsigned int bank, u32 mask) + { +- struct bcm2835_gpio_irqdata *irqdata = dev_id; +- struct bcm2835_pinctrl *pc = irqdata->pc; +- int bank = irqdata->bank; + unsigned long events; + unsigned offset; + unsigned gpio; + unsigned int type; + + events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4); ++ events &= mask; + events &= pc->enabled_irq_map[bank]; + for_each_set_bit(offset, &events, 32) { + gpio = (32 * bank) + offset; +@@ -409,7 +409,30 @@ static irqreturn_t bcm2835_gpio_irq_hand + + generic_handle_irq(irq_linear_revmap(pc->irq_domain, gpio)); + } +- return events ? IRQ_HANDLED : IRQ_NONE; ++ ++ return (events != 0); ++} ++ ++static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id) ++{ ++ struct bcm2835_gpio_irqdata *irqdata = dev_id; ++ struct bcm2835_pinctrl *pc = irqdata->pc; ++ int handled = 0; ++ ++ switch (irqdata->irqgroup) { ++ case 0: /* IRQ0 covers GPIOs 0-27 */ ++ handled = bcm2835_gpio_irq_handle_bank(pc, 0, 0x0fffffff); ++ break; ++ case 1: /* IRQ1 covers GPIOs 28-45 */ ++ handled = bcm2835_gpio_irq_handle_bank(pc, 0, 0xf0000000) | ++ bcm2835_gpio_irq_handle_bank(pc, 1, 0x00003fff); ++ break; ++ case 2: /* IRQ2 covers GPIOs 46-53 */ ++ handled = bcm2835_gpio_irq_handle_bank(pc, 1, 0x003fc000); ++ break; ++ } ++ ++ return handled ? IRQ_HANDLED : IRQ_NONE; + } + + static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc, +@@ -998,8 +1021,6 @@ static int bcm2835_pinctrl_probe(struct + for (i = 0; i < BCM2835_NUM_BANKS; i++) { + unsigned long events; + unsigned offset; +- int len; +- char *name; + + /* clear event detection flags */ + bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0); +@@ -1014,10 +1035,15 @@ static int bcm2835_pinctrl_probe(struct + for_each_set_bit(offset, &events, 32) + bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset)); + ++ spin_lock_init(&pc->irq_lock[i]); ++ } ++ ++ for (i = 0; i < BCM2835_NUM_IRQS; i++) { ++ int len; ++ char *name; + pc->irq[i] = irq_of_parse_and_map(np, i); + pc->irq_data[i].pc = pc; +- pc->irq_data[i].bank = i; +- spin_lock_init(&pc->irq_lock[i]); ++ pc->irq_data[i].irqgroup = i; + + len = strlen(dev_name(pc->dev)) + 16; + name = devm_kzalloc(pc->dev, len, GFP_KERNEL); +@@ -1074,6 +1100,7 @@ static struct platform_driver bcm2835_pi + .remove = bcm2835_pinctrl_remove, + .driver = { + .name = MODULE_NAME, ++ .owner = THIS_MODULE, + .of_match_table = bcm2835_pinctrl_match, + }, + }; diff --git a/target/linux/brcm2708/patches-4.9/950-0013-pinctrl-bcm2835-Only-request-the-interrupts-listed-i.patch b/target/linux/brcm2708/patches-4.9/950-0013-pinctrl-bcm2835-Only-request-the-interrupts-listed-i.patch new file mode 100644 index 000000000000..d2b764f98a18 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0013-pinctrl-bcm2835-Only-request-the-interrupts-listed-i.patch @@ -0,0 +1,27 @@ +From 6b37913f47f5fbd2748ea9abfb9a17fcfb1b5d29 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 26 Feb 2015 09:58:22 +0000 +Subject: [PATCH] pinctrl-bcm2835: Only request the interrupts listed in the + DTB + +Although the GPIO controller can generate three interrupts (four counting +the common one), the device tree files currently only specify two. In the +absence of the third, simply don't register that interrupt (as opposed to +registering 0), which has the effect of making it impossible to generate +interrupts for GPIOs 46-53 which, since they share pins with the SD card +interface, is unlikely to be a problem. +--- + drivers/pinctrl/bcm/pinctrl-bcm2835.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c ++++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c +@@ -1042,6 +1042,8 @@ static int bcm2835_pinctrl_probe(struct + int len; + char *name; + pc->irq[i] = irq_of_parse_and_map(np, i); ++ if (pc->irq[i] == 0) ++ break; + pc->irq_data[i].pc = pc; + pc->irq_data[i].irqgroup = i; + diff --git a/target/linux/brcm2708/patches-4.9/950-0014-pinctrl-bcm2835-Return-pins-to-inputs-when-freed.patch b/target/linux/brcm2708/patches-4.9/950-0014-pinctrl-bcm2835-Return-pins-to-inputs-when-freed.patch new file mode 100644 index 000000000000..4eb4923021f6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0014-pinctrl-bcm2835-Return-pins-to-inputs-when-freed.patch @@ -0,0 +1,41 @@ +From e64023aab5addf920379e9f919d7c5cd4c8d0981 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 6 May 2016 12:32:47 +0100 +Subject: [PATCH] pinctrl-bcm2835: Return pins to inputs when freed + +When dynamically unloading overlays, it is important that freed pins are +restored to being inputs to prevent functions from being enabled in +multiple places at once. + +Signed-off-by: Phil Elwell +--- + drivers/pinctrl/bcm/pinctrl-bcm2835.c | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c ++++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c +@@ -844,6 +844,16 @@ static const struct pinctrl_ops bcm2835_ + .dt_free_map = bcm2835_pctl_dt_free_map, + }; + ++static int bcm2835_pmx_free(struct pinctrl_dev *pctldev, ++ unsigned offset) ++{ ++ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); ++ ++ /* disable by setting to GPIO_IN */ ++ bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN); ++ return 0; ++} ++ + static int bcm2835_pmx_get_functions_count(struct pinctrl_dev *pctldev) + { + return BCM2835_FSEL_COUNT; +@@ -903,6 +913,7 @@ static int bcm2835_pmx_gpio_set_directio + } + + static const struct pinmux_ops bcm2835_pmx_ops = { ++ .free = bcm2835_pmx_free, + .get_functions_count = bcm2835_pmx_get_functions_count, + .get_function_name = bcm2835_pmx_get_function_name, + .get_function_groups = bcm2835_pmx_get_function_groups, diff --git a/target/linux/brcm2708/patches-4.9/950-0015-spi-bcm2835-Support-pin-groups-other-than-7-11.patch b/target/linux/brcm2708/patches-4.9/950-0015-spi-bcm2835-Support-pin-groups-other-than-7-11.patch new file mode 100644 index 000000000000..62145a2f07d5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0015-spi-bcm2835-Support-pin-groups-other-than-7-11.patch @@ -0,0 +1,80 @@ +From 6603973d0897c1a9b3b1a813c8ab1204efe98fe0 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 24 Jun 2015 14:10:44 +0100 +Subject: [PATCH] spi-bcm2835: Support pin groups other than 7-11 + +The spi-bcm2835 driver automatically uses GPIO chip-selects due to +some unreliability of the native ones. In doing so it chooses the +same pins as the native chip-selects would use, but the existing +code always uses pins 7 and 8, wherever the SPI function is mapped. + +Search the pinctrl group assigned to the driver for pins that +correspond to native chip-selects, and use those for GPIO chip- +selects. + +Signed-off-by: Phil Elwell +--- + drivers/spi/spi-bcm2835.c | 45 +++++++++++++++++++++++++++++++++++++-------- + 1 file changed, 37 insertions(+), 8 deletions(-) + +--- a/drivers/spi/spi-bcm2835.c ++++ b/drivers/spi/spi-bcm2835.c +@@ -688,6 +688,8 @@ static int bcm2835_spi_setup(struct spi_ + { + int err; + struct gpio_chip *chip; ++ struct device_node *pins; ++ u32 pingroup_index; + /* + * sanity checking the native-chipselects + */ +@@ -704,15 +706,42 @@ static int bcm2835_spi_setup(struct spi_ + "setup: only two native chip-selects are supported\n"); + return -EINVAL; + } +- /* now translate native cs to GPIO */ + +- /* get the gpio chip for the base */ +- chip = gpiochip_find("pinctrl-bcm2835", chip_match_name); +- if (!chip) +- return 0; ++ /* now translate native cs to GPIO */ ++ /* first look for chip select pins in the devices pin groups */ ++ for (pingroup_index = 0; ++ (pins = of_parse_phandle(spi->master->dev.of_node, ++ "pinctrl-0", ++ pingroup_index)) != 0; ++ pingroup_index++) { ++ u32 pin; ++ u32 pin_index; ++ for (pin_index = 0; ++ of_property_read_u32_index(pins, ++ "brcm,pins", ++ pin_index, ++ &pin) == 0; ++ pin_index++) { ++ if (((spi->chip_select == 0) && ++ ((pin == 8) || (pin == 36) || (pin == 46))) || ++ ((spi->chip_select == 1) && ++ ((pin == 7) || (pin == 35)))) { ++ spi->cs_gpio = pin; ++ break; ++ } ++ } ++ of_node_put(pins); ++ } ++ /* if that fails, assume GPIOs 7-11 are used */ ++ if (!gpio_is_valid(spi->cs_gpio) ) { ++ /* get the gpio chip for the base */ ++ chip = gpiochip_find("pinctrl-bcm2835", chip_match_name); ++ if (!chip) ++ return 0; + +- /* and calculate the real CS */ +- spi->cs_gpio = chip->base + 8 - spi->chip_select; ++ /* and calculate the real CS */ ++ spi->cs_gpio = chip->base + 8 - spi->chip_select; ++ } + + /* and set up the "mode" and level */ + dev_info(&spi->dev, "setting up native-CS%i as GPIO %i\n", diff --git a/target/linux/brcm2708/patches-4.9/950-0016-spi-bcm2835-Disable-forced-software-CS.patch b/target/linux/brcm2708/patches-4.9/950-0016-spi-bcm2835-Disable-forced-software-CS.patch new file mode 100644 index 000000000000..5d4062c4e497 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0016-spi-bcm2835-Disable-forced-software-CS.patch @@ -0,0 +1,34 @@ +From c0aaf0d4213bfc9df85c397cd974f7a6f15255f2 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 1 Jul 2016 22:09:24 +0100 +Subject: [PATCH] spi-bcm2835: Disable forced software CS + +Select software CS in bcm2708_common.dtsi, and disable the automatic +conversion in the driver to allow hardware CS to be re-enabled with an +overlay. + +See: https://github.com/raspberrypi/linux/issues/1547 + +Signed-off-by: Phil Elwell +--- + drivers/spi/spi-bcm2835.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/spi/spi-bcm2835.c ++++ b/drivers/spi/spi-bcm2835.c +@@ -707,6 +707,7 @@ static int bcm2835_spi_setup(struct spi_ + return -EINVAL; + } + ++#if 0 + /* now translate native cs to GPIO */ + /* first look for chip select pins in the devices pin groups */ + for (pingroup_index = 0; +@@ -756,6 +757,7 @@ static int bcm2835_spi_setup(struct spi_ + spi->chip_select, spi->cs_gpio, err); + return err; + } ++#endif + + return 0; + } diff --git a/target/linux/brcm2708/patches-4.9/950-0017-spi-bcm2835-Remove-unused-code.patch b/target/linux/brcm2708/patches-4.9/950-0017-spi-bcm2835-Remove-unused-code.patch new file mode 100644 index 000000000000..08577fce2af4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0017-spi-bcm2835-Remove-unused-code.patch @@ -0,0 +1,88 @@ +From 21f7f9d8146dd9e5a860198781febf78aafee3d1 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 8 Nov 2016 21:35:38 +0000 +Subject: [PATCH] spi-bcm2835: Remove unused code + +--- + drivers/spi/spi-bcm2835.c | 61 ----------------------------------------------- + 1 file changed, 61 deletions(-) + +--- a/drivers/spi/spi-bcm2835.c ++++ b/drivers/spi/spi-bcm2835.c +@@ -679,17 +679,8 @@ static void bcm2835_spi_set_cs(struct sp + bcm2835_wr(bs, BCM2835_SPI_CS, cs); + } + +-static int chip_match_name(struct gpio_chip *chip, void *data) +-{ +- return !strcmp(chip->label, data); +-} +- + static int bcm2835_spi_setup(struct spi_device *spi) + { +- int err; +- struct gpio_chip *chip; +- struct device_node *pins; +- u32 pingroup_index; + /* + * sanity checking the native-chipselects + */ +@@ -707,58 +698,6 @@ static int bcm2835_spi_setup(struct spi_ + return -EINVAL; + } + +-#if 0 +- /* now translate native cs to GPIO */ +- /* first look for chip select pins in the devices pin groups */ +- for (pingroup_index = 0; +- (pins = of_parse_phandle(spi->master->dev.of_node, +- "pinctrl-0", +- pingroup_index)) != 0; +- pingroup_index++) { +- u32 pin; +- u32 pin_index; +- for (pin_index = 0; +- of_property_read_u32_index(pins, +- "brcm,pins", +- pin_index, +- &pin) == 0; +- pin_index++) { +- if (((spi->chip_select == 0) && +- ((pin == 8) || (pin == 36) || (pin == 46))) || +- ((spi->chip_select == 1) && +- ((pin == 7) || (pin == 35)))) { +- spi->cs_gpio = pin; +- break; +- } +- } +- of_node_put(pins); +- } +- /* if that fails, assume GPIOs 7-11 are used */ +- if (!gpio_is_valid(spi->cs_gpio) ) { +- /* get the gpio chip for the base */ +- chip = gpiochip_find("pinctrl-bcm2835", chip_match_name); +- if (!chip) +- return 0; +- +- /* and calculate the real CS */ +- spi->cs_gpio = chip->base + 8 - spi->chip_select; +- } +- +- /* and set up the "mode" and level */ +- dev_info(&spi->dev, "setting up native-CS%i as GPIO %i\n", +- spi->chip_select, spi->cs_gpio); +- +- /* set up GPIO as output and pull to the correct level */ +- err = gpio_direction_output(spi->cs_gpio, +- (spi->mode & SPI_CS_HIGH) ? 0 : 1); +- if (err) { +- dev_err(&spi->dev, +- "could not set CS%i gpio %i as output: %i", +- spi->chip_select, spi->cs_gpio, err); +- return err; +- } +-#endif +- + return 0; + } + diff --git a/target/linux/brcm2708/patches-4.9/950-0018-ARM-bcm2835-Set-Serial-number-and-Revision.patch b/target/linux/brcm2708/patches-4.9/950-0018-ARM-bcm2835-Set-Serial-number-and-Revision.patch new file mode 100644 index 000000000000..cd14dcc1816c --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0018-ARM-bcm2835-Set-Serial-number-and-Revision.patch @@ -0,0 +1,53 @@ +From 78678f8e9f7fbbafadfecd54a5fb166a94d8d84f Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= +Date: Wed, 3 Jun 2015 12:26:13 +0200 +Subject: [PATCH] ARM: bcm2835: Set Serial number and Revision +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The VideoCore bootloader passes in Serial number and +Revision number through Device Tree. Make these available to +userspace through /proc/cpuinfo. + +Mainline status: + +There is a commit in linux-next that standardize passing the serial +number through Device Tree (string: /serial-number): +ARM: 8355/1: arch: Show the serial number from devicetree in cpuinfo + +There was an attempt to do the same with the revision number, but it +didn't get in: +[PATCH v2 1/2] arm: devtree: Set system_rev from DT revision + +Signed-off-by: Noralf Trønnes +--- + arch/arm/mach-bcm/board_bcm2835.c | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/arch/arm/mach-bcm/board_bcm2835.c ++++ b/arch/arm/mach-bcm/board_bcm2835.c +@@ -16,13 +16,23 @@ + #include + #include + #include ++#include + + #include + #include + + static void __init bcm2835_init(void) + { ++ struct device_node *np = of_find_node_by_path("/system"); ++ u32 val; ++ u64 val64; ++ + bcm2835_init_clocks(); ++ ++ if (!of_property_read_u32(np, "linux,revision", &val)) ++ system_rev = val; ++ if (!of_property_read_u64(np, "linux,serial", &val64)) ++ system_serial_low = val64; + } + + static const char * const bcm2835_compat[] = { diff --git a/target/linux/brcm2708/patches-4.9/950-0019-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch b/target/linux/brcm2708/patches-4.9/950-0019-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch new file mode 100644 index 000000000000..e800713ab836 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0019-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch @@ -0,0 +1,100 @@ +From e4f0f7daebca7005c67bf7ae3f6f59df587e91d5 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= +Date: Sat, 3 Oct 2015 22:22:55 +0200 +Subject: [PATCH] dmaengine: bcm2835: Load driver early and support legacy API +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Load driver early since at least bcm2708_fb doesn't support deferred +probing and even if it did, we don't want the video driver deferred. +Support the legacy DMA API which is needed by bcm2708_fb. +Don't mask out channel 2. + +Signed-off-by: Noralf Trønnes +--- + drivers/dma/Kconfig | 2 +- + drivers/dma/bcm2835-dma.c | 26 +++++++++++++++++++++++++- + 2 files changed, 26 insertions(+), 2 deletions(-) + +--- a/drivers/dma/Kconfig ++++ b/drivers/dma/Kconfig +@@ -108,7 +108,7 @@ config COH901318 + + config DMA_BCM2835 + tristate "BCM2835 DMA engine support" +- depends on ARCH_BCM2835 ++ depends on ARCH_BCM2835 || ARCH_BCM2708 || ARCH_BCM2709 + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + +--- a/drivers/dma/bcm2835-dma.c ++++ b/drivers/dma/bcm2835-dma.c +@@ -37,6 +37,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -48,6 +49,7 @@ + + #define BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED 14 + #define BCM2835_DMA_CHAN_NAME_SIZE 8 ++#define BCM2835_DMA_BULK_MASK BIT(0) + + struct bcm2835_dmadev { + struct dma_device ddev; +@@ -922,6 +924,9 @@ static int bcm2835_dma_probe(struct plat + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); ++ rc = bcm_dmaman_probe(pdev, base, BCM2835_DMA_BULK_MASK); ++ if (rc) ++ dev_err(&pdev->dev, "Failed to initialize the legacy API\n"); + + od->base = base; + +@@ -959,6 +964,9 @@ static int bcm2835_dma_probe(struct plat + goto err_no_dma; + } + ++ /* Channel 0 is used by the legacy API */ ++ chans_available &= ~BCM2835_DMA_BULK_MASK; ++ + /* get irqs for each channel that we support */ + for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) { + /* skip masked out channels */ +@@ -1033,6 +1041,7 @@ static int bcm2835_dma_remove(struct pla + { + struct bcm2835_dmadev *od = platform_get_drvdata(pdev); + ++ bcm_dmaman_remove(pdev); + dma_async_device_unregister(&od->ddev); + bcm2835_dma_free(od); + +@@ -1048,7 +1057,22 @@ static struct platform_driver bcm2835_dm + }, + }; + +-module_platform_driver(bcm2835_dma_driver); ++static int bcm2835_dma_init(void) ++{ ++ return platform_driver_register(&bcm2835_dma_driver); ++} ++ ++static void bcm2835_dma_exit(void) ++{ ++ platform_driver_unregister(&bcm2835_dma_driver); ++} ++ ++/* ++ * Load after serial driver (arch_initcall) so we see the messages if it fails, ++ * but before drivers (module_init) that need a DMA channel. ++ */ ++subsys_initcall(bcm2835_dma_init); ++module_exit(bcm2835_dma_exit); + + MODULE_ALIAS("platform:bcm2835-dma"); + MODULE_DESCRIPTION("BCM2835 DMA engine driver"); diff --git a/target/linux/brcm2708/patches-4.9/950-0020-firmware-Updated-mailbox-header.patch b/target/linux/brcm2708/patches-4.9/950-0020-firmware-Updated-mailbox-header.patch new file mode 100644 index 000000000000..37eb154393e4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0020-firmware-Updated-mailbox-header.patch @@ -0,0 +1,63 @@ +From e4edca57f8db4d03ad4dc82dd6761c0142ab310d Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Mon, 25 Jan 2016 17:25:12 +0000 +Subject: [PATCH] firmware: Updated mailbox header + +--- + include/soc/bcm2835/raspberrypi-firmware.h | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -63,6 +63,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_GET_MIN_VOLTAGE = 0x00030008, + RPI_FIRMWARE_GET_TURBO = 0x00030009, + RPI_FIRMWARE_GET_MAX_TEMPERATURE = 0x0003000a, ++ RPI_FIRMWARE_GET_STC = 0x0003000b, + RPI_FIRMWARE_ALLOCATE_MEMORY = 0x0003000c, + RPI_FIRMWARE_LOCK_MEMORY = 0x0003000d, + RPI_FIRMWARE_UNLOCK_MEMORY = 0x0003000e, +@@ -72,12 +73,15 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_SET_ENABLE_QPU = 0x00030012, + RPI_FIRMWARE_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014, + RPI_FIRMWARE_GET_EDID_BLOCK = 0x00030020, ++ RPI_FIRMWARE_GET_CUSTOMER_OTP = 0x00030021, + RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030, + RPI_FIRMWARE_SET_CLOCK_STATE = 0x00038001, + RPI_FIRMWARE_SET_CLOCK_RATE = 0x00038002, + RPI_FIRMWARE_SET_VOLTAGE = 0x00038003, + RPI_FIRMWARE_SET_TURBO = 0x00038009, ++ RPI_FIRMWARE_SET_CUSTOMER_OTP = 0x00038021, + RPI_FIRMWARE_SET_DOMAIN_STATE = 0x00038030, ++ RPI_FIRMWARE_SET_SDHOST_CLOCK = 0x00038042, + + /* Dispmanx TAGS */ + RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001, +@@ -91,6 +95,8 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_GET_VIRTUAL_OFFSET = 0x00040009, + RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN = 0x0004000a, + RPI_FIRMWARE_FRAMEBUFFER_GET_PALETTE = 0x0004000b, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF = 0x0004000f, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_GPIOVIRTBUF = 0x00040010, + RPI_FIRMWARE_FRAMEBUFFER_RELEASE = 0x00048001, + RPI_FIRMWARE_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003, + RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004, +@@ -100,6 +106,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_OFFSET = 0x00044009, + RPI_FIRMWARE_FRAMEBUFFER_TEST_OVERSCAN = 0x0004400a, + RPI_FIRMWARE_FRAMEBUFFER_TEST_PALETTE = 0x0004400b, ++ RPI_FIRMWARE_FRAMEBUFFER_TEST_VSYNC = 0x0004400e, + RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT = 0x00048003, + RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT = 0x00048004, + RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005, +@@ -108,6 +115,10 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, + RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, + RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f, ++ ++ RPI_FIRMWARE_VCHIQ_INIT = 0x00048010, + + RPI_FIRMWARE_GET_COMMAND_LINE = 0x00050001, + RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001, diff --git a/target/linux/brcm2708/patches-4.9/950-0021-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch b/target/linux/brcm2708/patches-4.9/950-0021-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch new file mode 100644 index 000000000000..dfa312bc371a --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0021-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch @@ -0,0 +1,37 @@ +From 599e7165ec6477139dae4f32a12e8d49d5dd8859 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 9 May 2016 17:28:18 -0700 +Subject: [PATCH] clk: bcm2835: Mark GPIO clocks enabled at boot as critical. + +These divide off of PLLD_PER and are used for the ethernet and wifi +PHYs source PLLs. Neither of them is currently represented by a phy +device that would grab the clock for us. + +This keeps other drivers from killing the networking PHYs when they +disable their own clocks and trigger PLLD_PER's refcount going to 0. + +v2: Skip marking as critical if they aren't on at boot. + +Signed-off-by: Eric Anholt +--- + drivers/clk/bcm/clk-bcm2835.c | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1262,6 +1262,15 @@ static struct clk_hw *bcm2835_register_c + init.name = data->name; + init.flags = data->flags | CLK_IGNORE_UNUSED; + ++ /* ++ * Some GPIO clocks for ethernet/wifi PLLs are marked as ++ * critical (since some platforms use them), but if the ++ * firmware didn't have them turned on then they clearly ++ * aren't actually critical. ++ */ ++ if ((cprman_read(cprman, data->ctl_reg) & CM_ENABLE) == 0) ++ init.flags &= ~CLK_IS_CRITICAL; ++ + if (data->is_vpu_clock) { + init.ops = &bcm2835_vpu_clock_clk_ops; + } else { diff --git a/target/linux/brcm2708/patches-4.9/950-0022-rtc-Add-SPI-alias-for-pcf2123-driver.patch b/target/linux/brcm2708/patches-4.9/950-0022-rtc-Add-SPI-alias-for-pcf2123-driver.patch new file mode 100644 index 000000000000..4992165a2174 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0022-rtc-Add-SPI-alias-for-pcf2123-driver.patch @@ -0,0 +1,20 @@ +From ffa1e97926ba3e22f7e41e2b5e16737461bf31ae Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 15 Jun 2016 16:48:41 +0100 +Subject: [PATCH] rtc: Add SPI alias for pcf2123 driver + +Without this alias, Device Tree won't cause the driver +to be loaded. + +See: https://github.com/raspberrypi/linux/pull/1510 +--- + drivers/rtc/rtc-pcf2123.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/rtc/rtc-pcf2123.c ++++ b/drivers/rtc/rtc-pcf2123.c +@@ -472,3 +472,4 @@ module_spi_driver(pcf2123_driver); + MODULE_AUTHOR("Chris Verges "); + MODULE_DESCRIPTION("NXP PCF2123 RTC driver"); + MODULE_LICENSE("GPL"); ++MODULE_ALIAS("spi:rtc-pcf2123"); diff --git a/target/linux/brcm2708/patches-4.9/950-0023-watchdog-bcm2835-Support-setting-reboot-partition.patch b/target/linux/brcm2708/patches-4.9/950-0023-watchdog-bcm2835-Support-setting-reboot-partition.patch new file mode 100644 index 000000000000..392ce70232d1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0023-watchdog-bcm2835-Support-setting-reboot-partition.patch @@ -0,0 +1,124 @@ +From 0e690096e05c3b4e806381ff38124dbdae3ba877 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= +Date: Fri, 7 Oct 2016 16:50:59 +0200 +Subject: [PATCH] watchdog: bcm2835: Support setting reboot partition +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The Raspberry Pi firmware looks at the RSTS register to know which +partition to boot from. The reboot syscall command +LINUX_REBOOT_CMD_RESTART2 supports passing in a string argument. + +Add support for passing in a partition number 0..63 to boot from. +Partition 63 is a special partiton indicating halt. +If the partition doesn't exist, the firmware falls back to partition 0. + +Signed-off-by: Noralf Trønnes +--- + drivers/watchdog/bcm2835_wdt.c | 61 +++++++++++++++++++++++++----------------- + 1 file changed, 36 insertions(+), 25 deletions(-) + +--- a/drivers/watchdog/bcm2835_wdt.c ++++ b/drivers/watchdog/bcm2835_wdt.c +@@ -35,13 +35,7 @@ + #define PM_RSTC_WRCFG_SET 0x00000030 + #define PM_RSTC_WRCFG_FULL_RESET 0x00000020 + #define PM_RSTC_RESET 0x00000102 +- +-/* +- * The Raspberry Pi firmware uses the RSTS register to know which partiton +- * to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10. +- * Partiton 63 is a special partition used by the firmware to indicate halt. +- */ +-#define PM_RSTS_RASPBERRYPI_HALT 0x555 ++#define PM_RSTS_PARTITION_CLR 0xfffffaaa + + #define SECS_TO_WDOG_TICKS(x) ((x) << 16) + #define WDOG_TICKS_TO_SECS(x) ((x) >> 16) +@@ -111,15 +105,28 @@ static struct watchdog_device bcm2835_wd + .timeout = WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET), + }; + +-static int +-bcm2835_restart(struct notifier_block *this, unsigned long mode, void *cmd) ++/* ++ * The Raspberry Pi firmware uses the RSTS register to know which partiton ++ * to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10. ++ * Partiton 63 is a special partition used by the firmware to indicate halt. ++ */ ++ ++static void bcm2835_restart(struct bcm2835_wdt *wdt, u8 partition) + { +- struct bcm2835_wdt *wdt = container_of(this, struct bcm2835_wdt, +- restart_handler); +- u32 val; ++ u32 val, rsts; ++ ++ rsts = (partition & BIT(0)) | ((partition & BIT(1)) << 1) | ++ ((partition & BIT(2)) << 2) | ((partition & BIT(3)) << 3) | ++ ((partition & BIT(4)) << 4) | ((partition & BIT(5)) << 5); ++ ++ val = readl_relaxed(wdt->base + PM_RSTS); ++ val &= PM_RSTS_PARTITION_CLR; ++ val |= PM_PASSWORD | rsts; ++ writel_relaxed(val, wdt->base + PM_RSTS); + + /* use a timeout of 10 ticks (~150us) */ + writel_relaxed(10 | PM_PASSWORD, wdt->base + PM_WDOG); ++ + val = readl_relaxed(wdt->base + PM_RSTC); + val &= PM_RSTC_WRCFG_CLR; + val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET; +@@ -127,6 +134,20 @@ bcm2835_restart(struct notifier_block *t + + /* No sleeping, possibly atomic. */ + mdelay(1); ++} ++ ++static int bcm2835_restart_notifier_call(struct notifier_block *this, ++ unsigned long mode, void *cmd) ++{ ++ struct bcm2835_wdt *wdt = container_of(this, struct bcm2835_wdt, ++ restart_handler); ++ unsigned long long val; ++ u8 partition = 0; ++ ++ if (cmd && !kstrtoull(cmd, 0, &val) && val <= 63) ++ partition = val; ++ ++ bcm2835_restart(wdt, partition); + + return 0; + } +@@ -142,19 +163,9 @@ static void bcm2835_power_off(void) + of_find_compatible_node(NULL, NULL, "brcm,bcm2835-pm-wdt"); + struct platform_device *pdev = of_find_device_by_node(np); + struct bcm2835_wdt *wdt = platform_get_drvdata(pdev); +- u32 val; +- +- /* +- * We set the watchdog hard reset bit here to distinguish this reset +- * from the normal (full) reset. bootcode.bin will not reboot after a +- * hard reset. +- */ +- val = readl_relaxed(wdt->base + PM_RSTS); +- val |= PM_PASSWORD | PM_RSTS_RASPBERRYPI_HALT; +- writel_relaxed(val, wdt->base + PM_RSTS); + +- /* Continue with normal reset mechanism */ +- bcm2835_restart(&wdt->restart_handler, REBOOT_HARD, NULL); ++ /* Partition 63 tells the firmware that this is a halt */ ++ bcm2835_restart(wdt, 63); + } + + static int bcm2835_wdt_probe(struct platform_device *pdev) +@@ -188,7 +199,7 @@ static int bcm2835_wdt_probe(struct plat + return err; + } + +- wdt->restart_handler.notifier_call = bcm2835_restart; ++ wdt->restart_handler.notifier_call = bcm2835_restart_notifier_call; + wdt->restart_handler.priority = 128; + register_restart_handler(&wdt->restart_handler); + if (pm_power_off == NULL) diff --git a/target/linux/brcm2708/patches-4.9/950-0024-reboot-Use-power-off-rather-than-busy-spinning-when-.patch b/target/linux/brcm2708/patches-4.9/950-0024-reboot-Use-power-off-rather-than-busy-spinning-when-.patch new file mode 100644 index 000000000000..d29517e23f03 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0024-reboot-Use-power-off-rather-than-busy-spinning-when-.patch @@ -0,0 +1,23 @@ +From 527f4308ee55e8727c486528879b7945b6404a72 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Tue, 5 Apr 2016 19:40:12 +0100 +Subject: [PATCH] reboot: Use power off rather than busy spinning when halt is + requested + +--- + arch/arm/kernel/reboot.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +--- a/arch/arm/kernel/reboot.c ++++ b/arch/arm/kernel/reboot.c +@@ -102,9 +102,7 @@ void machine_shutdown(void) + */ + void machine_halt(void) + { +- local_irq_disable(); +- smp_send_stop(); +- while (1); ++ machine_power_off(); + } + + /* diff --git a/target/linux/brcm2708/patches-4.9/950-0025-bcm-Make-RASPBERRYPI_POWER-depend-on-PM.patch b/target/linux/brcm2708/patches-4.9/950-0025-bcm-Make-RASPBERRYPI_POWER-depend-on-PM.patch new file mode 100644 index 000000000000..90c0a0eca8f4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0025-bcm-Make-RASPBERRYPI_POWER-depend-on-PM.patch @@ -0,0 +1,19 @@ +From d63e8989dc891121464a86cec95952f104edf383 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Wed, 9 Nov 2016 13:02:52 +0000 +Subject: [PATCH] bcm: Make RASPBERRYPI_POWER depend on PM + +--- + drivers/soc/bcm/Kconfig | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/soc/bcm/Kconfig ++++ b/drivers/soc/bcm/Kconfig +@@ -4,6 +4,7 @@ config RASPBERRYPI_POWER + bool "Raspberry Pi power domain driver" + depends on ARCH_BCM2835 || (COMPILE_TEST && OF) + depends on RASPBERRYPI_FIRMWARE=y ++ depends on PM + select PM_GENERIC_DOMAINS if PM + help + This enables support for the RPi power domains which can be enabled diff --git a/target/linux/brcm2708/patches-4.9/950-0026-Register-the-clocks-early-during-the-boot-process.patch b/target/linux/brcm2708/patches-4.9/950-0026-Register-the-clocks-early-during-the-boot-process.patch new file mode 100644 index 000000000000..9b2a6132364f --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0026-Register-the-clocks-early-during-the-boot-process.patch @@ -0,0 +1,45 @@ +From 492d6b9c3f1f8cc1eb890dc0eafacae51d6ba2f0 Mon Sep 17 00:00:00 2001 +From: Martin Sperl +Date: Fri, 2 Sep 2016 16:45:27 +0100 +Subject: [PATCH] Register the clocks early during the boot process, so that + special/critical clocks can get enabled early on in the boot process avoiding + the risk of disabling a clock, pll_divider or pll when a claiming driver + fails to install propperly - maybe it needs to defer. + +Signed-off-by: Martin Sperl +--- + drivers/clk/bcm/clk-bcm2835.c | 15 +++++++++++++-- + 1 file changed, 13 insertions(+), 2 deletions(-) + +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1903,8 +1903,15 @@ static int bcm2835_clk_probe(struct plat + if (ret) + return ret; + +- return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, ++ ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, + &cprman->onecell); ++ if (ret) ++ return ret; ++ ++ /* note that we have registered all the clocks */ ++ dev_dbg(dev, "registered %d clocks\n", asize); ++ ++ return 0; + } + + static const struct of_device_id bcm2835_clk_of_match[] = { +@@ -1921,7 +1928,11 @@ static struct platform_driver bcm2835_cl + .probe = bcm2835_clk_probe, + }; + +-builtin_platform_driver(bcm2835_clk_driver); ++static int __init __bcm2835_clk_driver_init(void) ++{ ++ return platform_driver_register(&bcm2835_clk_driver); ++} ++core_initcall(__bcm2835_clk_driver_init); + + MODULE_AUTHOR("Eric Anholt "); + MODULE_DESCRIPTION("BCM2835 clock driver"); diff --git a/target/linux/brcm2708/patches-4.9/950-0027-bcm2835-rng-Avoid-initialising-if-already-enabled.patch b/target/linux/brcm2708/patches-4.9/950-0027-bcm2835-rng-Avoid-initialising-if-already-enabled.patch new file mode 100644 index 000000000000..97309da0e196 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0027-bcm2835-rng-Avoid-initialising-if-already-enabled.patch @@ -0,0 +1,26 @@ +From ecba31015228961644ad8e17bcf132eea9c7a7f3 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Tue, 6 Dec 2016 17:05:39 +0000 +Subject: [PATCH] bcm2835-rng: Avoid initialising if already enabled + +Avoids the 0x40000 cycles of warmup again if firmware has already used it +--- + drivers/char/hw_random/bcm2835-rng.c | 7 ++++--- + 1 file changed, 4 insertions(+), 3 deletions(-) + +--- a/drivers/char/hw_random/bcm2835-rng.c ++++ b/drivers/char/hw_random/bcm2835-rng.c +@@ -102,9 +102,10 @@ static int bcm2835_rng_probe(struct plat + rng_setup(rng_base); + + /* set warm-up count & enable */ +- __raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS); +- __raw_writel(RNG_RBGEN, rng_base + RNG_CTRL); +- ++ if (!(__raw_readl(rng_base + RNG_CTRL) & RNG_RBGEN)) { ++ __raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS); ++ __raw_writel(RNG_RBGEN, rng_base + RNG_CTRL); ++ } + /* register driver */ + err = hwrng_register(&bcm2835_rng_ops); + if (err) { diff --git a/target/linux/brcm2708/patches-4.9/950-0028-kbuild-Ignore-dtco-targets-when-filtering-symbols.patch b/target/linux/brcm2708/patches-4.9/950-0028-kbuild-Ignore-dtco-targets-when-filtering-symbols.patch new file mode 100644 index 000000000000..0f5afac4ea31 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0028-kbuild-Ignore-dtco-targets-when-filtering-symbols.patch @@ -0,0 +1,20 @@ +From d438958d741a4edbb641791461ee8f6c34495a89 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 24 Aug 2016 16:28:44 +0100 +Subject: [PATCH] kbuild: Ignore dtco targets when filtering symbols + +--- + scripts/Kbuild.include | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/scripts/Kbuild.include ++++ b/scripts/Kbuild.include +@@ -284,7 +284,7 @@ ksym_dep_filter = + $(CPP) $(call flags_nodeps,c_flags) -D__KSYM_DEPS__ $< ;; \ + as_*_S|cpp_s_S) \ + $(CPP) $(call flags_nodeps,a_flags) -D__KSYM_DEPS__ $< ;; \ +- boot*|build*|*cpp_lds_S|dtc|host*|vdso*) : ;; \ ++ boot*|build*|*cpp_lds_S|dtc*|host*|vdso*) : ;; \ + *) echo "Don't know how to preprocess $(1)" >&2; false ;; \ + esac | tr ";" "\n" | sed -rn 's/^.*=== __KSYM_(.*) ===.*$$/KSYM_\1/p' + diff --git a/target/linux/brcm2708/patches-4.9/950-0029-BCM2835_DT-Fix-I2S-register-map.patch b/target/linux/brcm2708/patches-4.9/950-0029-BCM2835_DT-Fix-I2S-register-map.patch new file mode 100644 index 000000000000..c193ef91674b --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0029-BCM2835_DT-Fix-I2S-register-map.patch @@ -0,0 +1,36 @@ +From 317560a92ebfdac14df54b6a242dd8f5ecc1fd58 Mon Sep 17 00:00:00 2001 +From: Robert Tiemann +Date: Mon, 20 Jul 2015 11:01:25 +0200 +Subject: [PATCH] BCM2835_DT: Fix I2S register map + +--- + Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt | 4 ++-- + Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt | 4 ++-- + 2 files changed, 4 insertions(+), 4 deletions(-) + +--- a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt ++++ b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt +@@ -74,8 +74,8 @@ Example: + + bcm2835_i2s: i2s@7e203000 { + compatible = "brcm,bcm2835-i2s"; +- reg = < 0x7e203000 0x20>, +- < 0x7e101098 0x02>; ++ reg = < 0x7e203000 0x24>, ++ < 0x7e101098 0x08>; + + dmas = <&dma 2>, + <&dma 3>; +--- a/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt ++++ b/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt +@@ -16,8 +16,8 @@ Example: + + bcm2835_i2s: i2s@7e203000 { + compatible = "brcm,bcm2835-i2s"; +- reg = <0x7e203000 0x20>, +- <0x7e101098 0x02>; ++ reg = <0x7e203000 0x24>, ++ <0x7e101098 0x08>; + + dmas = <&dma 2>, + <&dma 3>; diff --git a/target/linux/brcm2708/patches-4.9/950-0030-Main-bcm2708-bcm2709-linux-port.patch b/target/linux/brcm2708/patches-4.9/950-0030-Main-bcm2708-bcm2709-linux-port.patch new file mode 100644 index 000000000000..20e5419a74b5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0030-Main-bcm2708-bcm2709-linux-port.patch @@ -0,0 +1,199 @@ +From 9874eb6473865b9d975a7c3756099955e7454e21 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Sun, 12 May 2013 12:24:19 +0100 +Subject: [PATCH] Main bcm2708/bcm2709 linux port +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: popcornmix +Signed-off-by: Noralf Trønnes + +bcm2709: Drop platform smp and timer init code + +irq-bcm2836 handles this through these functions: +bcm2835_init_local_timer_frequency() +bcm2836_arm_irqchip_smp_init() + +Signed-off-by: Noralf Trønnes + +bcm270x: Use watchdog for reboot/poweroff + +The watchdog driver already has support for reboot/poweroff. +Make use of this and remove the code from the platform files. + +Signed-off-by: Noralf Trønnes +--- + arch/arm/mach-bcm/Kconfig | 1 + + arch/arm/mach-bcm/board_bcm2835.c | 17 +++++++++++++++++ + arch/arm/mm/proc-v6.S | 15 ++++++++++++--- + drivers/irqchip/irq-bcm2835.c | 7 ++++++- + drivers/mailbox/bcm2835-mailbox.c | 18 ++++++++++++++++-- + 5 files changed, 52 insertions(+), 6 deletions(-) + +--- a/arch/arm/mach-bcm/Kconfig ++++ b/arch/arm/mach-bcm/Kconfig +@@ -155,6 +155,7 @@ config ARCH_BCM2835 + select FIQ + select PINCTRL + select PINCTRL_BCM2835 ++ select MFD_SYSCON if ARCH_MULTI_V7 + help + This enables support for the Broadcom BCM2835 and BCM2836 SoCs. + This SoC is used in the Raspberry Pi and Roku 2 devices. +--- a/arch/arm/mach-bcm/board_bcm2835.c ++++ b/arch/arm/mach-bcm/board_bcm2835.c +@@ -16,17 +16,21 @@ + #include + #include + #include ++#include + #include + + #include + #include + ++#include ++ + static void __init bcm2835_init(void) + { + struct device_node *np = of_find_node_by_path("/system"); + u32 val; + u64 val64; + ++ vc_cma_early_init(); + bcm2835_init_clocks(); + + if (!of_property_read_u32(np, "linux,revision", &val)) +@@ -35,6 +39,17 @@ static void __init bcm2835_init(void) + system_serial_low = val64; + } + ++static void __init bcm2835_init_early(void) ++{ ++ /* dwc_otg needs this for bounce buffers on non-aligned transfers */ ++ init_dma_coherent_pool_size(SZ_1M); ++} ++ ++static void __init bcm2835_board_reserve(void) ++{ ++ vc_cma_reserve(); ++} ++ + static const char * const bcm2835_compat[] = { + #ifdef CONFIG_ARCH_MULTI_V6 + "brcm,bcm2835", +@@ -47,5 +62,7 @@ static const char * const bcm2835_compat + + DT_MACHINE_START(BCM2835, "BCM2835") + .init_machine = bcm2835_init, ++ .reserve = bcm2835_board_reserve, ++ .init_early = bcm2835_init_early, + .dt_compat = bcm2835_compat + MACHINE_END +--- a/arch/arm/mm/proc-v6.S ++++ b/arch/arm/mm/proc-v6.S +@@ -73,10 +73,19 @@ ENDPROC(cpu_v6_reset) + * + * IRQs are already disabled. + */ ++ ++/* See jira SW-5991 for details of this workaround */ + ENTRY(cpu_v6_do_idle) +- mov r1, #0 +- mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode +- mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt ++ .align 5 ++ mov r1, #2 ++1: subs r1, #1 ++ nop ++ mcreq p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode ++ mcreq p15, 0, r1, c7, c0, 4 @ wait for interrupt ++ nop ++ nop ++ nop ++ bne 1b + ret lr + + ENTRY(cpu_v6_dcache_clean_area) +--- a/drivers/irqchip/irq-bcm2835.c ++++ b/drivers/irqchip/irq-bcm2835.c +@@ -54,7 +54,9 @@ + #include + + #include ++#ifndef CONFIG_ARM64 + #include ++#endif + + /* Put the bank and irq (32 bits) into the hwirq */ + #define MAKE_HWIRQ(b, n) (((b) << 5) | (n)) +@@ -82,6 +84,7 @@ + #define NR_BANKS 3 + #define IRQS_PER_BANK 32 + #define NUMBER_IRQS MAKE_HWIRQ(NR_BANKS, 0) ++#undef FIQ_START + #define FIQ_START (NR_IRQS_BANK0 + MAKE_HWIRQ(NR_BANKS - 1, 0)) + + static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 }; +@@ -256,10 +259,12 @@ static int __init armctrl_of_init(struct + MAKE_HWIRQ(b, i) + NUMBER_IRQS); + BUG_ON(irq <= 0); + irq_set_chip(irq, &armctrl_chip); +- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); ++ irq_set_probe(irq); + } + } ++#ifndef CONFIG_ARM64 + init_FIQ(FIQ_START); ++#endif + + return 0; + } +--- a/drivers/mailbox/bcm2835-mailbox.c ++++ b/drivers/mailbox/bcm2835-mailbox.c +@@ -51,12 +51,15 @@ + #define MAIL1_WRT (ARM_0_MAIL1 + 0x00) + #define MAIL1_STA (ARM_0_MAIL1 + 0x18) + ++/* On ARCH_BCM270x these come through (arm_control.h ) */ ++#ifndef ARM_MS_FULL + /* Status register: FIFO state. */ + #define ARM_MS_FULL BIT(31) + #define ARM_MS_EMPTY BIT(30) + + /* Configuration register: Enable interrupts. */ + #define ARM_MC_IHAVEDATAIRQEN BIT(0) ++#endif + + struct bcm2835_mbox { + void __iomem *regs; +@@ -151,7 +154,7 @@ static int bcm2835_mbox_probe(struct pla + return -ENOMEM; + spin_lock_init(&mbox->lock); + +- ret = devm_request_irq(dev, irq_of_parse_and_map(dev->of_node, 0), ++ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), + bcm2835_mbox_irq, 0, dev_name(dev), mbox); + if (ret) { + dev_err(dev, "Failed to register a mailbox IRQ handler: %d\n", +@@ -209,7 +212,18 @@ static struct platform_driver bcm2835_mb + .probe = bcm2835_mbox_probe, + .remove = bcm2835_mbox_remove, + }; +-module_platform_driver(bcm2835_mbox_driver); ++ ++static int __init bcm2835_mbox_init(void) ++{ ++ return platform_driver_register(&bcm2835_mbox_driver); ++} ++arch_initcall(bcm2835_mbox_init); ++ ++static void __init bcm2835_mbox_exit(void) ++{ ++ platform_driver_unregister(&bcm2835_mbox_driver); ++} ++module_exit(bcm2835_mbox_exit); + + MODULE_AUTHOR("Lubomir Rintel "); + MODULE_DESCRIPTION("BCM2835 mailbox IPC driver"); diff --git a/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch b/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch new file mode 100644 index 000000000000..0610d038b6b4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch @@ -0,0 +1,60858 @@ +From 65f57e56fcf9d40383718f0bcd9e6f95a34ca1aa Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Wed, 1 May 2013 19:46:17 +0100 +Subject: [PATCH] Add dwc_otg driver +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: popcornmix + +usb: dwc: fix lockdep false positive + +Signed-off-by: Kari Suvanto + +usb: dwc: fix inconsistent lock state + +Signed-off-by: Kari Suvanto + +Add FIQ patch to dwc_otg driver. Enable with dwc_otg.fiq_fix_enable=1. Should give about 10% more ARM performance. +Thanks to Gordon and Costas + +Avoid dynamic memory allocation for channel lock in USB driver. Thanks ddv2005. + +Add NAK holdoff scheme. Enabled by default, disable with dwc_otg.nak_holdoff_enable=0. Thanks gsh + +Make sure we wait for the reset to finish + +dwc_otg: fix bug in dwc_otg_hcd.c resulting in silent kernel + memory corruption, escalating to OOPS under high USB load. + +dwc_otg: Fix unsafe access of QTD during URB enqueue + +In dwc_otg_hcd_urb_enqueue during qtd creation, it was possible that the +transaction could complete almost immediately after the qtd was assigned +to a host channel during URB enqueue, which meant the qtd pointer was no +longer valid having been completed and removed. Usually, this resulted in +an OOPS during URB submission. By predetermining whether transactions +need to be queued or not, this unsafe pointer access is avoided. + +This bug was only evident on the Pi model A where a device was attached +that had no periodic endpoints (e.g. USB pendrive or some wlan devices). + +dwc_otg: Fix incorrect URB allocation error handling + +If the memory allocation for a dwc_otg_urb failed, the kernel would OOPS +because for some reason a member of the *unallocated* struct was set to +zero. Error handling changed to fail correctly. + +dwc_otg: fix potential use-after-free case in interrupt handler + +If a transaction had previously aborted, certain interrupts are +enabled to track error counts and reset where necessary. On IN +endpoints the host generates an ACK interrupt near-simultaneously +with completion of transfer. In the case where this transfer had +previously had an error, this results in a use-after-free on +the QTD memory space with a 1-byte length being overwritten to +0x00. + +dwc_otg: add handling of SPLIT transaction data toggle errors + +Previously a data toggle error on packets from a USB1.1 device behind +a TT would result in the Pi locking up as the driver never handled +the associated interrupt. Patch adds basic retry mechanism and +interrupt acknowledgement to cater for either a chance toggle error or +for devices that have a broken initial toggle state (FT8U232/FT232BM). + +dwc_otg: implement tasklet for returning URBs to usbcore hcd layer + +The dwc_otg driver interrupt handler for transfer completion will spend +a very long time with interrupts disabled when a URB is completed - +this is because usb_hcd_giveback_urb is called from within the handler +which for a USB device driver with complicated processing (e.g. webcam) +will take an exorbitant amount of time to complete. This results in +missed completion interrupts for other USB packets which lead to them +being dropped due to microframe overruns. + +This patch splits returning the URB to the usb hcd layer into a +high-priority tasklet. This will have most benefit for isochronous IN +transfers but will also have incidental benefit where multiple periodic +devices are active at once. + +dwc_otg: fix NAK holdoff and allow on split transactions only + +This corrects a bug where if a single active non-periodic endpoint +had at least one transaction in its qh, on frnum == MAX_FRNUM the qh +would get skipped and never get queued again. This would result in +a silent device until error detection (automatic or otherwise) would +either reset the device or flush and requeue the URBs. + +Additionally the NAK holdoff was enabled for all transactions - this +would potentially stall a HS endpoint for 1ms if a previous error state +enabled this interrupt and the next response was a NAK. Fix so that +only split transactions get held off. + +dwc_otg: Call usb_hcd_unlink_urb_from_ep with lock held in completion handler + +usb_hcd_unlink_urb_from_ep must be called with the HCD lock held. Calling it +asynchronously in the tasklet was not safe (regression in +c4564d4a1a0a9b10d4419e48239f5d99e88d2667). + +This change unlinks it from the endpoint prior to queueing it for handling in +the tasklet, and also adds a check to ensure the urb is OK to be unlinked +before doing so. + +NULL pointer dereference kernel oopses had been observed in usb_hcd_giveback_urb +when a USB device was unplugged/replugged during data transfer. This effect +was reproduced using automated USB port power control, hundreds of replug +events were performed during active transfers to confirm that the problem was +eliminated. + +USB fix using a FIQ to implement split transactions + +This commit adds a FIQ implementaion that schedules +the split transactions using a FIQ so we don't get +held off by the interrupt latency of Linux + +dwc_otg: fix device attributes and avoid kernel warnings on boot + +dcw_otg: avoid logging function that can cause panics + +See: https://github.com/raspberrypi/firmware/issues/21 +Thanks to cleverca22 for fix + +dwc_otg: mask correct interrupts after transaction error recovery + +The dwc_otg driver will unmask certain interrupts on a transaction +that previously halted in the error state in order to reset the +QTD error count. The various fine-grained interrupt handlers do not +consider that other interrupts besides themselves were unmasked. + +By disabling the two other interrupts only ever enabled in DMA mode +for this purpose, we can avoid unnecessary function calls in the +IRQ handler. This will also prevent an unneccesary FIQ interrupt +from being generated if the FIQ is enabled. + +dwc_otg: fiq: prevent FIQ thrash and incorrect state passing to IRQ + +In the case of a transaction to a device that had previously aborted +due to an error, several interrupts are enabled to reset the error +count when a device responds. This has the side-effect of making the +FIQ thrash because the hardware will generate multiple instances of +a NAK on an IN bulk/interrupt endpoint and multiple instances of ACK +on an OUT bulk/interrupt endpoint. Make the FIQ mask and clear the +associated interrupts. + +Additionally, on non-split transactions make sure that only unmasked +interrupts are cleared. This caused a hard-to-trigger but serious +race condition when you had the combination of an endpoint awaiting +error recovery and a transaction completed on an endpoint - due to +the sequencing and timing of interrupts generated by the dwc_otg core, +it was possible to confuse the IRQ handler. + +Fix function tracing + +dwc_otg: whitespace cleanup in dwc_otg_urb_enqueue + +dwc_otg: prevent OOPSes during device disconnects + +The dwc_otg_urb_enqueue function is thread-unsafe. In particular the +access of urb->hcpriv, usb_hcd_link_urb_to_ep, dwc_otg_urb->qtd and +friends does not occur within a critical section and so if a device +was unplugged during activity there was a high chance that the +usbcore hub_thread would try to disable the endpoint with partially- +formed entries in the URB queue. This would result in BUG() or null +pointer dereferences. + +Fix so that access of urb->hcpriv, enqueuing to the hardware and +adding to usbcore endpoint URB lists is contained within a single +critical section. + +dwc_otg: prevent BUG() in TT allocation if hub address is > 16 + +A fixed-size array is used to track TT allocation. This was +previously set to 16 which caused a crash because +dwc_otg_hcd_allocate_port would read past the end of the array. + +This was hit if a hub was plugged in which enumerated as addr > 16, +due to previous device resets or unplugs. + +Also add #ifdef FIQ_DEBUG around hcd->hub_port_alloc[], which grows +to a large size if 128 hub addresses are supported. This field is +for debug only for tracking which frame an allocate happened in. + +dwc_otg: make channel halts with unknown state less damaging + +If the IRQ received a channel halt interrupt through the FIQ +with no other bits set, the IRQ would not release the host +channel and never complete the URB. + +Add catchall handling to treat as a transaction error and retry. + +dwc_otg: fiq_split: use TTs with more granularity + +This fixes certain issues with split transaction scheduling. + +- Isochronous multi-packet OUT transactions now hog the TT until + they are completed - this prevents hubs aborting transactions + if they get a periodic start-split out-of-order +- Don't perform TT allocation on non-periodic endpoints - this + allows simultaneous use of the TT's bulk/control and periodic + transaction buffers + +This commit will mainly affect USB audio playback. + +dwc_otg: fix potential sleep while atomic during urb enqueue + +Fixes a regression introduced with eb1b482a. Kmalloc called from +dwc_otg_hcd_qtd_add / dwc_otg_hcd_qtd_create did not always have +the GPF_ATOMIC flag set. Force this flag when inside the larger +critical section. + +dwc_otg: make fiq_split_enable imply fiq_fix_enable + +Failing to set up the FIQ correctly would result in +"IRQ 32: nobody cared" errors in dmesg. + +dwc_otg: prevent crashes on host port disconnects + +Fix several issues resulting in crashes or inconsistent state +if a Model A root port was disconnected. + +- Clean up queue heads properly in kill_urbs_in_qh_list by + removing the empty QHs from the schedule lists +- Set the halt status properly to prevent IRQ handlers from + using freed memory +- Add fiq_split related cleanup for saved registers +- Make microframe scheduling reclaim host channels if + active during a disconnect +- Abort URBs with -ESHUTDOWN status response, informing + device drivers so they respond in a more correct fashion + and don't try to resubmit URBs +- Prevent IRQ handlers from attempting to handle channel + interrupts if the associated URB was dequeued (and the + driver state was cleared) + +dwc_otg: prevent leaking URBs during enqueue + +A dwc_otg_urb would get leaked if the HCD enqueue function +failed for any reason. Free the URB at the appropriate points. + +dwc_otg: Enable NAK holdoff for control split transactions + +Certain low-speed devices take a very long time to complete a +data or status stage of a control transaction, producing NAK +responses until they complete internal processing - the USB2.0 +spec limit is up to 500mS. This causes the same type of interrupt +storm as seen with USB-serial dongles prior to c8edb238. + +In certain circumstances, usually while booting, this interrupt +storm could cause SD card timeouts. + +dwc_otg: Fix for occasional lockup on boot when doing a USB reset + +dwc_otg: Don't issue traffic to LS devices in FS mode + +Issuing low-speed packets when the root port is in full-speed mode +causes the root port to stop responding. Explicitly fail when +enqueuing URBs to a LS endpoint on a FS bus. + +Fix ARM architecture issue with local_irq_restore() + +If local_fiq_enable() is called before a local_irq_restore(flags) where +the flags variable has the F bit set, the FIQ will be erroneously disabled. + +Fixup arch_local_irq_restore to avoid trampling the F bit in CPSR. + +Also fix some of the hacks previously implemented for previous dwc_otg +incarnations. + +dwc_otg: fiq_fsm: Base commit for driver rewrite + +This commit removes the previous FIQ fixes entirely and adds fiq_fsm. + +This rewrite features much more complete support for split transactions +and takes into account several OTG hardware bugs. High-speed +isochronous transactions are also capable of being performed by fiq_fsm. + +All driver options have been removed and replaced with: + - dwc_otg.fiq_enable (bool) + - dwc_otg.fiq_fsm_enable (bool) + - dwc_otg.fiq_fsm_mask (bitmask) + - dwc_otg.nak_holdoff (unsigned int) + +Defaults are specified such that fiq_fsm behaves similarly to the +previously implemented FIQ fixes. + +fiq_fsm: Push error recovery into the FIQ when fiq_fsm is used + +If the transfer associated with a QTD failed due to a bus error, the HCD +would retry the transfer up to 3 times (implementing the USB2.0 +three-strikes retry in software). + +Due to the masking mechanism used by fiq_fsm, it is only possible to pass +a single interrupt through to the HCD per-transfer. + +In this instance host channels would fall off the radar because the error +reset would function, but the subsequent channel halt would be lost. + +Push the error count reset into the FIQ handler. + +fiq_fsm: Implement timeout mechanism + +For full-speed endpoints with a large packet size, interrupt latency +runs the risk of the FIQ starting a transaction too late in a full-speed +frame. If the device is still transmitting data when EOF2 for the +downstream frame occurs, the hub will disable the port. This change is +not reflected in the hub status endpoint and the device becomes +unresponsive. + +Prevent high-bandwidth transactions from being started too late in a +frame. The mechanism is not guaranteed: a combination of bit stuffing +and hub latency may still result in a device overrunning. + +fiq_fsm: fix bounce buffer utilisation for Isochronous OUT + +Multi-packet isochronous OUT transactions were subject to a few bounday +bugs. Fix them. + +Audio playback is now much more robust: however, an issue stands with +devices that have adaptive sinks - ALSA plays samples too fast. + +dwc_otg: Return full-speed frame numbers in HS mode + +The frame counter increments on every *microframe* in high-speed mode. +Most device drivers expect this number to be in full-speed frames - this +caused considerable confusion to e.g. snd_usb_audio which uses the +frame counter to estimate the number of samples played. + +fiq_fsm: save PID on completion of interrupt OUT transfers + +Also add edge case handling for interrupt transports. + +Note that for periodic split IN, data toggles are unimplemented in the +OTG host hardware - it unconditionally accepts any PID. + +fiq_fsm: add missing case for fiq_fsm_tt_in_use() + +Certain combinations of bitrate and endpoint activity could +result in a periodic transaction erroneously getting started +while the previous Isochronous OUT was still active. + +fiq_fsm: clear hcintmsk for aborted transactions + +Prevents the FIQ from erroneously handling interrupts +on a timed out channel. + +fiq_fsm: enable by default + +fiq_fsm: fix dequeues for non-periodic split transactions + +If a dequeue happened between the SSPLIT and CSPLIT phases of the +transaction, the HCD would never receive an interrupt. + +fiq_fsm: Disable by default + +fiq_fsm: Handle HC babble errors + +The HCTSIZ transfer size field raises a babble interrupt if +the counter wraps. Handle the resulting interrupt in this case. + +dwc_otg: fix interrupt registration for fiq_enable=0 + +Additionally make the module parameter conditional for wherever +hcd->fiq_state is touched. + +fiq_fsm: Enable by default + +dwc_otg: Fix various issues with root port and transaction errors + +Process the host port interrupts correctly (and don't trample them). +Root port hotplug now functional again. + +Fix a few thinkos with the transaction error passthrough for fiq_fsm. + +fiq_fsm: Implement hack for Split Interrupt transactions + +Hubs aren't too picky about which endpoint we send Control type split +transactions to. By treating Interrupt transfers as Control, it is +possible to use the non-periodic queue in the OTG core as well as the +non-periodic FIFOs in the hub itself. This massively reduces the +microframe exclusivity/contention that periodic split transactions +otherwise have to enforce. + +It goes without saying that this is a fairly egregious USB specification +violation, but it works. + +Original idea by Hans Petter Selasky @ FreeBSD.org. + +dwc_otg: FIQ support on SMP. Set up FIQ stack and handler on Core 0 only. + +dwc_otg: introduce fiq_fsm_spin(un|)lock() + +SMP safety for the FIQ relies on register read-modify write cycles being +completed in the correct order. Several places in the DWC code modify +registers also touched by the FIQ. Protect these by a bare-bones lock +mechanism. + +This also makes it possible to run the FIQ and IRQ handlers on different +cores. + +fiq_fsm: fix build on bcm2708 and bcm2709 platforms + +dwc_otg: put some barriers back where they should be for UP + +bcm2709/dwc_otg: Setup FIQ on core 1 if >1 core active + +dwc_otg: fixup read-modify-write in critical paths + +Be more careful about read-modify-write on registers that the FIQ +also touches. + +Guard fiq_fsm_spin_lock with fiq_enable check + +fiq_fsm: Falling out of the state machine isn't fatal + +This edge case can be hit if the port is disabled while the FIQ is +in the middle of a transaction. Make the effects less severe. + +Also get rid of the useless return value. + +squash: dwc_otg: Allow to build without SMP + +usb: core: make overcurrent messages more prominent + +Hub overcurrent messages are more serious than "debug". Increase loglevel. + +usb: dwc_otg: Don't use dma_to_virt() + +Commit 6ce0d20 changes dma_to_virt() which breaks this driver. +Open code the old dma_to_virt() implementation to work around this. + +Limit the use of __bus_to_virt() to cases where transfer_buffer_length +is set and transfer_buffer is not set. This is done to increase the +chance that this driver will also work on ARCH_BCM2835. + +transfer_buffer should not be NULL if the length is set, but the +comment in the code indicates that there are situations where this +might happen. drivers/usb/isp1760/isp1760-hcd.c also has a similar +comment pointing to a possible: 'usb storage / SCSI bug'. + +Signed-off-by: Noralf Trønnes + +dwc_otg: Fix crash when fiq_enable=0 + +dwc_otg: fiq_fsm: Make high-speed isochronous strided transfers work properly + +Certain low-bandwidth high-speed USB devices (specialist audio devices, +compressed-frame webcams) have packet intervals > 1 microframe. + +Stride these transfers in the FIQ by using the start-of-frame interrupt +to restart the channel at the right time. + +dwc_otg: Force host mode to fix incorrect compute module boards + +dwc_otg: Add ARCH_BCM2835 support + +Signed-off-by: Noralf Trønnes + +dwc_otg: Simplify FIQ irq number code + +Dropping ATAGS means we can simplify the FIQ irq number code. +Also add error checking on the returned irq number. + +Signed-off-by: Noralf Trønnes + +dwc_otg: Remove duplicate gadget probe/unregister function + +dwc_otg: Properly set the HFIR + +Douglas Anderson reported: + +According to the most up to date version of the dwc2 databook, the FRINT +field of the HFIR register should be programmed to: +* 125 us * (PHY clock freq for HS) - 1 +* 1000 us * (PHY clock freq for FS/LS) - 1 + +This is opposed to older versions of the doc that claimed it should be: +* 125 us * (PHY clock freq for HS) +* 1000 us * (PHY clock freq for FS/LS) + +and reported lower timing jitter on a USB analyser + +dcw_otg: trim xfer length when buffer larger than allocated size is received + +dwc_otg: Don't free qh align buffers in atomic context + +dwc_otg: Enable the hack for Split Interrupt transactions by default + +dwc_otg.fiq_fsm_mask=0xF has long been a suggestion for users with audio stutters or other USB bandwidth issues. +So far we are aware of many success stories but no failure caused by this setting. +Make it a default to learn more. + +See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=70437 + +Signed-off-by: popcornmix + +dwc_otg: Use kzalloc when suitable + +dwc_otg: Pass struct device to dma_alloc*() + +This makes it possible to get the bus address from Device Tree. + +Signed-off-by: Noralf Trønnes +--- + arch/arm/include/asm/irqflags.h | 16 +- + arch/arm/kernel/fiqasm.S | 4 + + drivers/usb/Makefile | 1 + + drivers/usb/core/generic.c | 1 + + drivers/usb/core/hub.c | 2 +- + drivers/usb/core/message.c | 79 + + drivers/usb/core/otg_whitelist.h | 114 +- + drivers/usb/gadget/file_storage.c | 3676 ++++++++++ + drivers/usb/host/Kconfig | 13 + + drivers/usb/host/Makefile | 2 + + drivers/usb/host/dwc_common_port/Makefile | 58 + + drivers/usb/host/dwc_common_port/Makefile.fbsd | 17 + + drivers/usb/host/dwc_common_port/Makefile.linux | 49 + + drivers/usb/host/dwc_common_port/changes.txt | 174 + + drivers/usb/host/dwc_common_port/doc/doxygen.cfg | 270 + + drivers/usb/host/dwc_common_port/dwc_cc.c | 532 ++ + drivers/usb/host/dwc_common_port/dwc_cc.h | 224 + + drivers/usb/host/dwc_common_port/dwc_common_fbsd.c | 1308 ++++ + .../usb/host/dwc_common_port/dwc_common_linux.c | 1418 ++++ + drivers/usb/host/dwc_common_port/dwc_common_nbsd.c | 1275 ++++ + drivers/usb/host/dwc_common_port/dwc_crypto.c | 308 + + drivers/usb/host/dwc_common_port/dwc_crypto.h | 111 + + drivers/usb/host/dwc_common_port/dwc_dh.c | 291 + + drivers/usb/host/dwc_common_port/dwc_dh.h | 106 + + drivers/usb/host/dwc_common_port/dwc_list.h | 594 ++ + drivers/usb/host/dwc_common_port/dwc_mem.c | 245 + + drivers/usb/host/dwc_common_port/dwc_modpow.c | 636 ++ + drivers/usb/host/dwc_common_port/dwc_modpow.h | 34 + + drivers/usb/host/dwc_common_port/dwc_notifier.c | 319 + + drivers/usb/host/dwc_common_port/dwc_notifier.h | 122 + + drivers/usb/host/dwc_common_port/dwc_os.h | 1276 ++++ + drivers/usb/host/dwc_common_port/usb.h | 946 +++ + drivers/usb/host/dwc_otg/Makefile | 82 + + drivers/usb/host/dwc_otg/doc/doxygen.cfg | 224 + + drivers/usb/host/dwc_otg/dummy_audio.c | 1574 +++++ + drivers/usb/host/dwc_otg/dwc_cfi_common.h | 142 + + drivers/usb/host/dwc_otg/dwc_otg_adp.c | 854 +++ + drivers/usb/host/dwc_otg/dwc_otg_adp.h | 80 + + drivers/usb/host/dwc_otg/dwc_otg_attr.c | 1210 ++++ + drivers/usb/host/dwc_otg/dwc_otg_attr.h | 89 + + drivers/usb/host/dwc_otg/dwc_otg_cfi.c | 1876 +++++ + drivers/usb/host/dwc_otg/dwc_otg_cfi.h | 320 + + drivers/usb/host/dwc_otg/dwc_otg_cil.c | 7141 ++++++++++++++++++++ + drivers/usb/host/dwc_otg/dwc_otg_cil.h | 1464 ++++ + drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c | 1594 +++++ + drivers/usb/host/dwc_otg/dwc_otg_core_if.h | 705 ++ + drivers/usb/host/dwc_otg/dwc_otg_dbg.h | 117 + + drivers/usb/host/dwc_otg/dwc_otg_driver.c | 1757 +++++ + drivers/usb/host/dwc_otg/dwc_otg_driver.h | 86 + + drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 1355 ++++ + drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h | 370 + + drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S | 80 + + drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 4260 ++++++++++++ + drivers/usb/host/dwc_otg/dwc_otg_hcd.h | 868 +++ + drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c | 1139 ++++ + drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h | 417 ++ + drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c | 2727 ++++++++ + drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 1005 +++ + drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c | 963 +++ + drivers/usb/host/dwc_otg/dwc_otg_os_dep.h | 188 + + drivers/usb/host/dwc_otg/dwc_otg_pcd.c | 2725 ++++++++ + drivers/usb/host/dwc_otg/dwc_otg_pcd.h | 273 + + drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h | 361 + + drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c | 5148 ++++++++++++++ + drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c | 1280 ++++ + drivers/usb/host/dwc_otg/dwc_otg_regs.h | 2550 +++++++ + drivers/usb/host/dwc_otg/test/Makefile | 16 + + drivers/usb/host/dwc_otg/test/dwc_otg_test.pm | 337 + + drivers/usb/host/dwc_otg/test/test_mod_param.pl | 133 + + drivers/usb/host/dwc_otg/test/test_sysfs.pl | 193 + + 70 files changed, 59908 insertions(+), 16 deletions(-) + create mode 100644 drivers/usb/gadget/file_storage.c + create mode 100644 drivers/usb/host/dwc_common_port/Makefile + create mode 100644 drivers/usb/host/dwc_common_port/Makefile.fbsd + create mode 100644 drivers/usb/host/dwc_common_port/Makefile.linux + create mode 100644 drivers/usb/host/dwc_common_port/changes.txt + create mode 100644 drivers/usb/host/dwc_common_port/doc/doxygen.cfg + create mode 100644 drivers/usb/host/dwc_common_port/dwc_cc.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_cc.h + create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_fbsd.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_linux.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_nbsd.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_crypto.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_crypto.h + create mode 100644 drivers/usb/host/dwc_common_port/dwc_dh.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_dh.h + create mode 100644 drivers/usb/host/dwc_common_port/dwc_list.h + create mode 100644 drivers/usb/host/dwc_common_port/dwc_mem.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_modpow.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_modpow.h + create mode 100644 drivers/usb/host/dwc_common_port/dwc_notifier.c + create mode 100644 drivers/usb/host/dwc_common_port/dwc_notifier.h + create mode 100644 drivers/usb/host/dwc_common_port/dwc_os.h + create mode 100644 drivers/usb/host/dwc_common_port/usb.h + create mode 100644 drivers/usb/host/dwc_otg/Makefile + create mode 100644 drivers/usb/host/dwc_otg/doc/doxygen.cfg + create mode 100644 drivers/usb/host/dwc_otg/dummy_audio.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_cfi_common.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_adp.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_adp.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_attr.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_attr.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cfi.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cfi.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_core_if.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_dbg.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_driver.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_driver.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_os_dep.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c + create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_regs.h + create mode 100644 drivers/usb/host/dwc_otg/test/Makefile + create mode 100644 drivers/usb/host/dwc_otg/test/dwc_otg_test.pm + create mode 100644 drivers/usb/host/dwc_otg/test/test_mod_param.pl + create mode 100644 drivers/usb/host/dwc_otg/test/test_sysfs.pl + +--- a/arch/arm/include/asm/irqflags.h ++++ b/arch/arm/include/asm/irqflags.h +@@ -162,13 +162,23 @@ static inline unsigned long arch_local_s + } + + /* +- * restore saved IRQ & FIQ state ++ * restore saved IRQ state + */ + #define arch_local_irq_restore arch_local_irq_restore + static inline void arch_local_irq_restore(unsigned long flags) + { +- asm volatile( +- " msr " IRQMASK_REG_NAME_W ", %0 @ local_irq_restore" ++ unsigned long temp = 0; ++ flags &= ~(1 << 6); ++ asm volatile ( ++ " mrs %0, cpsr" ++ : "=r" (temp) ++ : ++ : "memory", "cc"); ++ /* Preserve FIQ bit */ ++ temp &= (1 << 6); ++ flags = flags | temp; ++ asm volatile ( ++ " msr cpsr_c, %0 @ local_irq_restore" + : + : "r" (flags) + : "memory", "cc"); +--- a/arch/arm/kernel/fiqasm.S ++++ b/arch/arm/kernel/fiqasm.S +@@ -47,3 +47,7 @@ ENTRY(__get_fiq_regs) + mov r0, r0 @ avoid hazard prior to ARMv4 + ret lr + ENDPROC(__get_fiq_regs) ++ ++ENTRY(__FIQ_Branch) ++ mov pc, r8 ++ENDPROC(__FIQ_Branch) +--- a/drivers/usb/Makefile ++++ b/drivers/usb/Makefile +@@ -7,6 +7,7 @@ + obj-$(CONFIG_USB) += core/ + obj-$(CONFIG_USB_SUPPORT) += phy/ + ++obj-$(CONFIG_USB_DWCOTG) += host/ + obj-$(CONFIG_USB_DWC3) += dwc3/ + obj-$(CONFIG_USB_DWC2) += dwc2/ + obj-$(CONFIG_USB_ISP1760) += isp1760/ +--- a/drivers/usb/core/generic.c ++++ b/drivers/usb/core/generic.c +@@ -152,6 +152,7 @@ int usb_choose_configuration(struct usb_ + dev_warn(&udev->dev, + "no configuration chosen from %d choice%s\n", + num_configs, plural(num_configs)); ++ dev_warn(&udev->dev, "No support over %dmA\n", udev->bus_mA); + } + return i; + } +--- a/drivers/usb/core/hub.c ++++ b/drivers/usb/core/hub.c +@@ -5009,7 +5009,7 @@ static void port_event(struct usb_hub *h + if (portchange & USB_PORT_STAT_C_OVERCURRENT) { + u16 status = 0, unused; + +- dev_dbg(&port_dev->dev, "over-current change\n"); ++ dev_notice(&port_dev->dev, "over-current change\n"); + usb_clear_port_feature(hdev, port1, + USB_PORT_FEAT_C_OVER_CURRENT); + msleep(100); /* Cool down */ +--- a/drivers/usb/core/message.c ++++ b/drivers/usb/core/message.c +@@ -1908,6 +1908,85 @@ free_interfaces: + if (cp->string == NULL && + !(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS)) + cp->string = usb_cache_string(dev, cp->desc.iConfiguration); ++/* Uncomment this define to enable the HS Electrical Test support */ ++#define DWC_HS_ELECT_TST 1 ++#ifdef DWC_HS_ELECT_TST ++ /* Here we implement the HS Electrical Test support. The ++ * tester uses a vendor ID of 0x1A0A to indicate we should ++ * run a special test sequence. The product ID tells us ++ * which sequence to run. We invoke the test sequence by ++ * sending a non-standard SetFeature command to our root ++ * hub port. Our dwc_otg_hcd_hub_control() routine will ++ * recognize the command and perform the desired test ++ * sequence. ++ */ ++ if (dev->descriptor.idVendor == 0x1A0A) { ++ /* HSOTG Electrical Test */ ++ dev_warn(&dev->dev, "VID from HSOTG Electrical Test Fixture\n"); ++ ++ if (dev->bus && dev->bus->root_hub) { ++ struct usb_device *hdev = dev->bus->root_hub; ++ dev_warn(&dev->dev, "Got PID 0x%x\n", dev->descriptor.idProduct); ++ ++ switch (dev->descriptor.idProduct) { ++ case 0x0101: /* TEST_SE0_NAK */ ++ dev_warn(&dev->dev, "TEST_SE0_NAK\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x300, NULL, 0, HZ); ++ break; ++ ++ case 0x0102: /* TEST_J */ ++ dev_warn(&dev->dev, "TEST_J\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x100, NULL, 0, HZ); ++ break; ++ ++ case 0x0103: /* TEST_K */ ++ dev_warn(&dev->dev, "TEST_K\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x200, NULL, 0, HZ); ++ break; ++ ++ case 0x0104: /* TEST_PACKET */ ++ dev_warn(&dev->dev, "TEST_PACKET\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x400, NULL, 0, HZ); ++ break; ++ ++ case 0x0105: /* TEST_FORCE_ENABLE */ ++ dev_warn(&dev->dev, "TEST_FORCE_ENABLE\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x500, NULL, 0, HZ); ++ break; ++ ++ case 0x0106: /* HS_HOST_PORT_SUSPEND_RESUME */ ++ dev_warn(&dev->dev, "HS_HOST_PORT_SUSPEND_RESUME\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x600, NULL, 0, 40 * HZ); ++ break; ++ ++ case 0x0107: /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ ++ dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x700, NULL, 0, 40 * HZ); ++ break; ++ ++ case 0x0108: /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ ++ dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute\n"); ++ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), ++ USB_REQ_SET_FEATURE, USB_RT_PORT, ++ USB_PORT_FEAT_TEST, 0x800, NULL, 0, 40 * HZ); ++ } ++ } ++ } ++#endif /* DWC_HS_ELECT_TST */ + + /* Now that the interfaces are installed, re-enable LPM. */ + usb_unlocked_enable_lpm(dev); +--- a/drivers/usb/core/otg_whitelist.h ++++ b/drivers/usb/core/otg_whitelist.h +@@ -19,33 +19,82 @@ + static struct usb_device_id whitelist_table[] = { + + /* hubs are optional in OTG, but very handy ... */ ++#define CERT_WITHOUT_HUBS ++#if defined(CERT_WITHOUT_HUBS) ++{ USB_DEVICE( 0x0000, 0x0000 ), }, /* Root HUB Only*/ ++#else + { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), }, + { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 1), }, ++{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 2), }, ++#endif + + #ifdef CONFIG_USB_PRINTER /* ignoring nonstatic linkage! */ + /* FIXME actually, printers are NOT supposed to use device classes; + * they're supposed to use interface classes... + */ +-{ USB_DEVICE_INFO(7, 1, 1) }, +-{ USB_DEVICE_INFO(7, 1, 2) }, +-{ USB_DEVICE_INFO(7, 1, 3) }, ++//{ USB_DEVICE_INFO(7, 1, 1) }, ++//{ USB_DEVICE_INFO(7, 1, 2) }, ++//{ USB_DEVICE_INFO(7, 1, 3) }, + #endif + + #ifdef CONFIG_USB_NET_CDCETHER + /* Linux-USB CDC Ethernet gadget */ +-{ USB_DEVICE(0x0525, 0xa4a1), }, ++//{ USB_DEVICE(0x0525, 0xa4a1), }, + /* Linux-USB CDC Ethernet + RNDIS gadget */ +-{ USB_DEVICE(0x0525, 0xa4a2), }, ++//{ USB_DEVICE(0x0525, 0xa4a2), }, + #endif + + #if IS_ENABLED(CONFIG_USB_TEST) + /* gadget zero, for testing */ +-{ USB_DEVICE(0x0525, 0xa4a0), }, ++//{ USB_DEVICE(0x0525, 0xa4a0), }, + #endif + ++/* OPT Tester */ ++{ USB_DEVICE( 0x1a0a, 0x0101 ), }, /* TEST_SE0_NAK */ ++{ USB_DEVICE( 0x1a0a, 0x0102 ), }, /* Test_J */ ++{ USB_DEVICE( 0x1a0a, 0x0103 ), }, /* Test_K */ ++{ USB_DEVICE( 0x1a0a, 0x0104 ), }, /* Test_PACKET */ ++{ USB_DEVICE( 0x1a0a, 0x0105 ), }, /* Test_FORCE_ENABLE */ ++{ USB_DEVICE( 0x1a0a, 0x0106 ), }, /* HS_PORT_SUSPEND_RESUME */ ++{ USB_DEVICE( 0x1a0a, 0x0107 ), }, /* SINGLE_STEP_GET_DESCRIPTOR setup */ ++{ USB_DEVICE( 0x1a0a, 0x0108 ), }, /* SINGLE_STEP_GET_DESCRIPTOR execute */ ++ ++/* Sony cameras */ ++{ USB_DEVICE_VER(0x054c,0x0010,0x0410, 0x0500), }, ++ ++/* Memory Devices */ ++//{ USB_DEVICE( 0x0781, 0x5150 ), }, /* SanDisk */ ++//{ USB_DEVICE( 0x05DC, 0x0080 ), }, /* Lexar */ ++//{ USB_DEVICE( 0x4146, 0x9281 ), }, /* IOMEGA */ ++//{ USB_DEVICE( 0x067b, 0x2507 ), }, /* Hammer 20GB External HD */ ++{ USB_DEVICE( 0x0EA0, 0x2168 ), }, /* Ours Technology Inc. (BUFFALO ClipDrive)*/ ++//{ USB_DEVICE( 0x0457, 0x0150 ), }, /* Silicon Integrated Systems Corp. */ ++ ++/* HP Printers */ ++//{ USB_DEVICE( 0x03F0, 0x1102 ), }, /* HP Photosmart 245 */ ++//{ USB_DEVICE( 0x03F0, 0x1302 ), }, /* HP Photosmart 370 Series */ ++ ++/* Speakers */ ++//{ USB_DEVICE( 0x0499, 0x3002 ), }, /* YAMAHA YST-MS35D USB Speakers */ ++//{ USB_DEVICE( 0x0672, 0x1041 ), }, /* Labtec USB Headset */ ++ + { } /* Terminating entry */ + }; + ++static inline void report_errors(struct usb_device *dev) ++{ ++ /* OTG MESSAGE: report errors here, customize to match your product */ ++ dev_info(&dev->dev, "device Vendor:%04x Product:%04x is not supported\n", ++ le16_to_cpu(dev->descriptor.idVendor), ++ le16_to_cpu(dev->descriptor.idProduct)); ++ if (USB_CLASS_HUB == dev->descriptor.bDeviceClass){ ++ dev_printk(KERN_CRIT, &dev->dev, "Unsupported Hub Topology\n"); ++ } else { ++ dev_printk(KERN_CRIT, &dev->dev, "Attached Device is not Supported\n"); ++ } ++} ++ ++ + static int is_targeted(struct usb_device *dev) + { + struct usb_device_id *id = whitelist_table; +@@ -95,16 +144,57 @@ static int is_targeted(struct usb_device + continue; + + return 1; +- } ++ /* NOTE: can't use usb_match_id() since interface caches ++ * aren't set up yet. this is cut/paste from that code. ++ */ ++ for (id = whitelist_table; id->match_flags; id++) { ++#ifdef DEBUG ++ dev_dbg(&dev->dev, ++ "ID: V:%04x P:%04x DC:%04x SC:%04x PR:%04x \n", ++ id->idVendor, ++ id->idProduct, ++ id->bDeviceClass, ++ id->bDeviceSubClass, ++ id->bDeviceProtocol); ++#endif + +- /* add other match criteria here ... */ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && ++ id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && ++ id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) ++ continue; ++ ++ /* No need to test id->bcdDevice_lo != 0, since 0 is never ++ greater than any unsigned number. */ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && ++ (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && ++ (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && ++ (id->bDeviceClass != dev->descriptor.bDeviceClass)) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && ++ (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass)) ++ continue; ++ ++ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && ++ (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) ++ continue; + ++ return 1; ++ } ++ } + +- /* OTG MESSAGE: report errors here, customize to match your product */ +- dev_err(&dev->dev, "device v%04x p%04x is not supported\n", +- le16_to_cpu(dev->descriptor.idVendor), +- le16_to_cpu(dev->descriptor.idProduct)); ++ /* add other match criteria here ... */ + ++ report_errors(dev); + return 0; + } + +--- /dev/null ++++ b/drivers/usb/gadget/file_storage.c +@@ -0,0 +1,3676 @@ ++/* ++ * file_storage.c -- File-backed USB Storage Gadget, for USB development ++ * ++ * Copyright (C) 2003-2008 Alan Stern ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++ ++/* ++ * The File-backed Storage Gadget acts as a USB Mass Storage device, ++ * appearing to the host as a disk drive or as a CD-ROM drive. In addition ++ * to providing an example of a genuinely useful gadget driver for a USB ++ * device, it also illustrates a technique of double-buffering for increased ++ * throughput. Last but not least, it gives an easy way to probe the ++ * behavior of the Mass Storage drivers in a USB host. ++ * ++ * Backing storage is provided by a regular file or a block device, specified ++ * by the "file" module parameter. Access can be limited to read-only by ++ * setting the optional "ro" module parameter. (For CD-ROM emulation, ++ * access is always read-only.) The gadget will indicate that it has ++ * removable media if the optional "removable" module parameter is set. ++ * ++ * The gadget supports the Control-Bulk (CB), Control-Bulk-Interrupt (CBI), ++ * and Bulk-Only (also known as Bulk-Bulk-Bulk or BBB) transports, selected ++ * by the optional "transport" module parameter. It also supports the ++ * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03), ++ * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by ++ * the optional "protocol" module parameter. In addition, the default ++ * Vendor ID, Product ID, release number and serial number can be overridden. ++ * ++ * There is support for multiple logical units (LUNs), each of which has ++ * its own backing file. The number of LUNs can be set using the optional ++ * "luns" module parameter (anywhere from 1 to 8), and the corresponding ++ * files are specified using comma-separated lists for "file" and "ro". ++ * The default number of LUNs is taken from the number of "file" elements; ++ * it is 1 if "file" is not given. If "removable" is not set then a backing ++ * file must be specified for each LUN. If it is set, then an unspecified ++ * or empty backing filename means the LUN's medium is not loaded. Ideally ++ * each LUN would be settable independently as a disk drive or a CD-ROM ++ * drive, but currently all LUNs have to be the same type. The CD-ROM ++ * emulation includes a single data track and no audio tracks; hence there ++ * need be only one backing file per LUN. ++ * ++ * Requirements are modest; only a bulk-in and a bulk-out endpoint are ++ * needed (an interrupt-out endpoint is also needed for CBI). The memory ++ * requirement amounts to two 16K buffers, size configurable by a parameter. ++ * Support is included for both full-speed and high-speed operation. ++ * ++ * Note that the driver is slightly non-portable in that it assumes a ++ * single memory/DMA buffer will be useable for bulk-in, bulk-out, and ++ * interrupt-in endpoints. With most device controllers this isn't an ++ * issue, but there may be some with hardware restrictions that prevent ++ * a buffer from being used by more than one endpoint. ++ * ++ * Module options: ++ * ++ * file=filename[,filename...] ++ * Required if "removable" is not set, names of ++ * the files or block devices used for ++ * backing storage ++ * serial=HHHH... Required serial number (string of hex chars) ++ * ro=b[,b...] Default false, booleans for read-only access ++ * removable Default false, boolean for removable media ++ * luns=N Default N = number of filenames, number of ++ * LUNs to support ++ * nofua=b[,b...] Default false, booleans for ignore FUA flag ++ * in SCSI WRITE(10,12) commands ++ * stall Default determined according to the type of ++ * USB device controller (usually true), ++ * boolean to permit the driver to halt ++ * bulk endpoints ++ * cdrom Default false, boolean for whether to emulate ++ * a CD-ROM drive ++ * transport=XXX Default BBB, transport name (CB, CBI, or BBB) ++ * protocol=YYY Default SCSI, protocol name (RBC, 8020 or ++ * ATAPI, QIC, UFI, 8070, or SCSI; ++ * also 1 - 6) ++ * vendor=0xVVVV Default 0x0525 (NetChip), USB Vendor ID ++ * product=0xPPPP Default 0xa4a5 (FSG), USB Product ID ++ * release=0xRRRR Override the USB release number (bcdDevice) ++ * buflen=N Default N=16384, buffer size used (will be ++ * rounded down to a multiple of ++ * PAGE_CACHE_SIZE) ++ * ++ * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "serial", "ro", ++ * "removable", "luns", "nofua", "stall", and "cdrom" options are available; ++ * default values are used for everything else. ++ * ++ * The pathnames of the backing files and the ro settings are available in ++ * the attribute files "file", "nofua", and "ro" in the lun subdirectory of ++ * the gadget's sysfs directory. If the "removable" option is set, writing to ++ * these files will simulate ejecting/loading the medium (writing an empty ++ * line means eject) and adjusting a write-enable tab. Changes to the ro ++ * setting are not allowed when the medium is loaded or if CD-ROM emulation ++ * is being used. ++ * ++ * This gadget driver is heavily based on "Gadget Zero" by David Brownell. ++ * The driver's SCSI command interface was based on the "Information ++ * technology - Small Computer System Interface - 2" document from ++ * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at ++ * . The single exception ++ * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the ++ * "Universal Serial Bus Mass Storage Class UFI Command Specification" ++ * document, Revision 1.0, December 14, 1998, available at ++ * . ++ */ ++ ++ ++/* ++ * Driver Design ++ * ++ * The FSG driver is fairly straightforward. There is a main kernel ++ * thread that handles most of the work. Interrupt routines field ++ * callbacks from the controller driver: bulk- and interrupt-request ++ * completion notifications, endpoint-0 events, and disconnect events. ++ * Completion events are passed to the main thread by wakeup calls. Many ++ * ep0 requests are handled at interrupt time, but SetInterface, ++ * SetConfiguration, and device reset requests are forwarded to the ++ * thread in the form of "exceptions" using SIGUSR1 signals (since they ++ * should interrupt any ongoing file I/O operations). ++ * ++ * The thread's main routine implements the standard command/data/status ++ * parts of a SCSI interaction. It and its subroutines are full of tests ++ * for pending signals/exceptions -- all this polling is necessary since ++ * the kernel has no setjmp/longjmp equivalents. (Maybe this is an ++ * indication that the driver really wants to be running in userspace.) ++ * An important point is that so long as the thread is alive it keeps an ++ * open reference to the backing file. This will prevent unmounting ++ * the backing file's underlying filesystem and could cause problems ++ * during system shutdown, for example. To prevent such problems, the ++ * thread catches INT, TERM, and KILL signals and converts them into ++ * an EXIT exception. ++ * ++ * In normal operation the main thread is started during the gadget's ++ * fsg_bind() callback and stopped during fsg_unbind(). But it can also ++ * exit when it receives a signal, and there's no point leaving the ++ * gadget running when the thread is dead. So just before the thread ++ * exits, it deregisters the gadget driver. This makes things a little ++ * tricky: The driver is deregistered at two places, and the exiting ++ * thread can indirectly call fsg_unbind() which in turn can tell the ++ * thread to exit. The first problem is resolved through the use of the ++ * REGISTERED atomic bitflag; the driver will only be deregistered once. ++ * The second problem is resolved by having fsg_unbind() check ++ * fsg->state; it won't try to stop the thread if the state is already ++ * FSG_STATE_TERMINATED. ++ * ++ * To provide maximum throughput, the driver uses a circular pipeline of ++ * buffer heads (struct fsg_buffhd). In principle the pipeline can be ++ * arbitrarily long; in practice the benefits don't justify having more ++ * than 2 stages (i.e., double buffering). But it helps to think of the ++ * pipeline as being a long one. Each buffer head contains a bulk-in and ++ * a bulk-out request pointer (since the buffer can be used for both ++ * output and input -- directions always are given from the host's ++ * point of view) as well as a pointer to the buffer and various state ++ * variables. ++ * ++ * Use of the pipeline follows a simple protocol. There is a variable ++ * (fsg->next_buffhd_to_fill) that points to the next buffer head to use. ++ * At any time that buffer head may still be in use from an earlier ++ * request, so each buffer head has a state variable indicating whether ++ * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the ++ * buffer head to be EMPTY, filling the buffer either by file I/O or by ++ * USB I/O (during which the buffer head is BUSY), and marking the buffer ++ * head FULL when the I/O is complete. Then the buffer will be emptied ++ * (again possibly by USB I/O, during which it is marked BUSY) and ++ * finally marked EMPTY again (possibly by a completion routine). ++ * ++ * A module parameter tells the driver to avoid stalling the bulk ++ * endpoints wherever the transport specification allows. This is ++ * necessary for some UDCs like the SuperH, which cannot reliably clear a ++ * halt on a bulk endpoint. However, under certain circumstances the ++ * Bulk-only specification requires a stall. In such cases the driver ++ * will halt the endpoint and set a flag indicating that it should clear ++ * the halt in software during the next device reset. Hopefully this ++ * will permit everything to work correctly. Furthermore, although the ++ * specification allows the bulk-out endpoint to halt when the host sends ++ * too much data, implementing this would cause an unavoidable race. ++ * The driver will always use the "no-stall" approach for OUT transfers. ++ * ++ * One subtle point concerns sending status-stage responses for ep0 ++ * requests. Some of these requests, such as device reset, can involve ++ * interrupting an ongoing file I/O operation, which might take an ++ * arbitrarily long time. During that delay the host might give up on ++ * the original ep0 request and issue a new one. When that happens the ++ * driver should not notify the host about completion of the original ++ * request, as the host will no longer be waiting for it. So the driver ++ * assigns to each ep0 request a unique tag, and it keeps track of the ++ * tag value of the request associated with a long-running exception ++ * (device-reset, interface-change, or configuration-change). When the ++ * exception handler is finished, the status-stage response is submitted ++ * only if the current ep0 request tag is equal to the exception request ++ * tag. Thus only the most recently received ep0 request will get a ++ * status-stage response. ++ * ++ * Warning: This driver source file is too long. It ought to be split up ++ * into a header file plus about 3 separate .c files, to handle the details ++ * of the Gadget, USB Mass Storage, and SCSI protocols. ++ */ ++ ++ ++/* #define VERBOSE_DEBUG */ ++/* #define DUMP_MSGS */ ++ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "gadget_chips.h" ++ ++ ++ ++/* ++ * Kbuild is not very cooperative with respect to linking separately ++ * compiled library objects into one module. So for now we won't use ++ * separate compilation ... ensuring init/exit sections work to shrink ++ * the runtime footprint, and giving us at least some parts of what ++ * a "gcc --combine ... part1.c part2.c part3.c ... " build would. ++ */ ++#include "usbstring.c" ++#include "config.c" ++#include "epautoconf.c" ++ ++/*-------------------------------------------------------------------------*/ ++ ++#define DRIVER_DESC "File-backed Storage Gadget" ++#define DRIVER_NAME "g_file_storage" ++#define DRIVER_VERSION "1 September 2010" ++ ++static char fsg_string_manufacturer[64]; ++static const char fsg_string_product[] = DRIVER_DESC; ++static const char fsg_string_config[] = "Self-powered"; ++static const char fsg_string_interface[] = "Mass Storage"; ++ ++ ++#include "storage_common.c" ++ ++ ++MODULE_DESCRIPTION(DRIVER_DESC); ++MODULE_AUTHOR("Alan Stern"); ++MODULE_LICENSE("Dual BSD/GPL"); ++ ++/* ++ * This driver assumes self-powered hardware and has no way for users to ++ * trigger remote wakeup. It uses autoconfiguration to select endpoints ++ * and endpoint addresses. ++ */ ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++ ++/* Encapsulate the module parameter settings */ ++ ++static struct { ++ char *file[FSG_MAX_LUNS]; ++ char *serial; ++ bool ro[FSG_MAX_LUNS]; ++ bool nofua[FSG_MAX_LUNS]; ++ unsigned int num_filenames; ++ unsigned int num_ros; ++ unsigned int num_nofuas; ++ unsigned int nluns; ++ ++ bool removable; ++ bool can_stall; ++ bool cdrom; ++ ++ char *transport_parm; ++ char *protocol_parm; ++ unsigned short vendor; ++ unsigned short product; ++ unsigned short release; ++ unsigned int buflen; ++ ++ int transport_type; ++ char *transport_name; ++ int protocol_type; ++ char *protocol_name; ++ ++} mod_data = { // Default values ++ .transport_parm = "BBB", ++ .protocol_parm = "SCSI", ++ .removable = 0, ++ .can_stall = 1, ++ .cdrom = 0, ++ .vendor = FSG_VENDOR_ID, ++ .product = FSG_PRODUCT_ID, ++ .release = 0xffff, // Use controller chip type ++ .buflen = 16384, ++ }; ++ ++ ++module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames, ++ S_IRUGO); ++MODULE_PARM_DESC(file, "names of backing files or devices"); ++ ++module_param_named(serial, mod_data.serial, charp, S_IRUGO); ++MODULE_PARM_DESC(serial, "USB serial number"); ++ ++module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO); ++MODULE_PARM_DESC(ro, "true to force read-only"); ++ ++module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas, ++ S_IRUGO); ++MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit"); ++ ++module_param_named(luns, mod_data.nluns, uint, S_IRUGO); ++MODULE_PARM_DESC(luns, "number of LUNs"); ++ ++module_param_named(removable, mod_data.removable, bool, S_IRUGO); ++MODULE_PARM_DESC(removable, "true to simulate removable media"); ++ ++module_param_named(stall, mod_data.can_stall, bool, S_IRUGO); ++MODULE_PARM_DESC(stall, "false to prevent bulk stalls"); ++ ++module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO); ++MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk"); ++ ++/* In the non-TEST version, only the module parameters listed above ++ * are available. */ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++ ++module_param_named(transport, mod_data.transport_parm, charp, S_IRUGO); ++MODULE_PARM_DESC(transport, "type of transport (BBB, CBI, or CB)"); ++ ++module_param_named(protocol, mod_data.protocol_parm, charp, S_IRUGO); ++MODULE_PARM_DESC(protocol, "type of protocol (RBC, 8020, QIC, UFI, " ++ "8070, or SCSI)"); ++ ++module_param_named(vendor, mod_data.vendor, ushort, S_IRUGO); ++MODULE_PARM_DESC(vendor, "USB Vendor ID"); ++ ++module_param_named(product, mod_data.product, ushort, S_IRUGO); ++MODULE_PARM_DESC(product, "USB Product ID"); ++ ++module_param_named(release, mod_data.release, ushort, S_IRUGO); ++MODULE_PARM_DESC(release, "USB release number"); ++ ++module_param_named(buflen, mod_data.buflen, uint, S_IRUGO); ++MODULE_PARM_DESC(buflen, "I/O buffer size"); ++ ++#endif /* CONFIG_USB_FILE_STORAGE_TEST */ ++ ++ ++/* ++ * These definitions will permit the compiler to avoid generating code for ++ * parts of the driver that aren't used in the non-TEST version. Even gcc ++ * can recognize when a test of a constant expression yields a dead code ++ * path. ++ */ ++ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++ ++#define transport_is_bbb() (mod_data.transport_type == USB_PR_BULK) ++#define transport_is_cbi() (mod_data.transport_type == USB_PR_CBI) ++#define protocol_is_scsi() (mod_data.protocol_type == USB_SC_SCSI) ++ ++#else ++ ++#define transport_is_bbb() 1 ++#define transport_is_cbi() 0 ++#define protocol_is_scsi() 1 ++ ++#endif /* CONFIG_USB_FILE_STORAGE_TEST */ ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++ ++struct fsg_dev { ++ /* lock protects: state, all the req_busy's, and cbbuf_cmnd */ ++ spinlock_t lock; ++ struct usb_gadget *gadget; ++ ++ /* filesem protects: backing files in use */ ++ struct rw_semaphore filesem; ++ ++ /* reference counting: wait until all LUNs are released */ ++ struct kref ref; ++ ++ struct usb_ep *ep0; // Handy copy of gadget->ep0 ++ struct usb_request *ep0req; // For control responses ++ unsigned int ep0_req_tag; ++ const char *ep0req_name; ++ ++ struct usb_request *intreq; // For interrupt responses ++ int intreq_busy; ++ struct fsg_buffhd *intr_buffhd; ++ ++ unsigned int bulk_out_maxpacket; ++ enum fsg_state state; // For exception handling ++ unsigned int exception_req_tag; ++ ++ u8 config, new_config; ++ ++ unsigned int running : 1; ++ unsigned int bulk_in_enabled : 1; ++ unsigned int bulk_out_enabled : 1; ++ unsigned int intr_in_enabled : 1; ++ unsigned int phase_error : 1; ++ unsigned int short_packet_received : 1; ++ unsigned int bad_lun_okay : 1; ++ ++ unsigned long atomic_bitflags; ++#define REGISTERED 0 ++#define IGNORE_BULK_OUT 1 ++#define SUSPENDED 2 ++ ++ struct usb_ep *bulk_in; ++ struct usb_ep *bulk_out; ++ struct usb_ep *intr_in; ++ ++ struct fsg_buffhd *next_buffhd_to_fill; ++ struct fsg_buffhd *next_buffhd_to_drain; ++ ++ int thread_wakeup_needed; ++ struct completion thread_notifier; ++ struct task_struct *thread_task; ++ ++ int cmnd_size; ++ u8 cmnd[MAX_COMMAND_SIZE]; ++ enum data_direction data_dir; ++ u32 data_size; ++ u32 data_size_from_cmnd; ++ u32 tag; ++ unsigned int lun; ++ u32 residue; ++ u32 usb_amount_left; ++ ++ /* The CB protocol offers no way for a host to know when a command ++ * has completed. As a result the next command may arrive early, ++ * and we will still have to handle it. For that reason we need ++ * a buffer to store new commands when using CB (or CBI, which ++ * does not oblige a host to wait for command completion either). */ ++ int cbbuf_cmnd_size; ++ u8 cbbuf_cmnd[MAX_COMMAND_SIZE]; ++ ++ unsigned int nluns; ++ struct fsg_lun *luns; ++ struct fsg_lun *curlun; ++ /* Must be the last entry */ ++ struct fsg_buffhd buffhds[]; ++}; ++ ++typedef void (*fsg_routine_t)(struct fsg_dev *); ++ ++static int exception_in_progress(struct fsg_dev *fsg) ++{ ++ return (fsg->state > FSG_STATE_IDLE); ++} ++ ++/* Make bulk-out requests be divisible by the maxpacket size */ ++static void set_bulk_out_req_length(struct fsg_dev *fsg, ++ struct fsg_buffhd *bh, unsigned int length) ++{ ++ unsigned int rem; ++ ++ bh->bulk_out_intended_length = length; ++ rem = length % fsg->bulk_out_maxpacket; ++ if (rem > 0) ++ length += fsg->bulk_out_maxpacket - rem; ++ bh->outreq->length = length; ++} ++ ++static struct fsg_dev *the_fsg; ++static struct usb_gadget_driver fsg_driver; ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) ++{ ++ const char *name; ++ ++ if (ep == fsg->bulk_in) ++ name = "bulk-in"; ++ else if (ep == fsg->bulk_out) ++ name = "bulk-out"; ++ else ++ name = ep->name; ++ DBG(fsg, "%s set halt\n", name); ++ return usb_ep_set_halt(ep); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * DESCRIPTORS ... most are static, but strings and (full) configuration ++ * descriptors are built on demand. Also the (static) config and interface ++ * descriptors are adjusted during fsg_bind(). ++ */ ++ ++/* There is only one configuration. */ ++#define CONFIG_VALUE 1 ++ ++static struct usb_device_descriptor ++device_desc = { ++ .bLength = sizeof device_desc, ++ .bDescriptorType = USB_DT_DEVICE, ++ ++ .bcdUSB = cpu_to_le16(0x0200), ++ .bDeviceClass = USB_CLASS_PER_INTERFACE, ++ ++ /* The next three values can be overridden by module parameters */ ++ .idVendor = cpu_to_le16(FSG_VENDOR_ID), ++ .idProduct = cpu_to_le16(FSG_PRODUCT_ID), ++ .bcdDevice = cpu_to_le16(0xffff), ++ ++ .iManufacturer = FSG_STRING_MANUFACTURER, ++ .iProduct = FSG_STRING_PRODUCT, ++ .iSerialNumber = FSG_STRING_SERIAL, ++ .bNumConfigurations = 1, ++}; ++ ++static struct usb_config_descriptor ++config_desc = { ++ .bLength = sizeof config_desc, ++ .bDescriptorType = USB_DT_CONFIG, ++ ++ /* wTotalLength computed by usb_gadget_config_buf() */ ++ .bNumInterfaces = 1, ++ .bConfigurationValue = CONFIG_VALUE, ++ .iConfiguration = FSG_STRING_CONFIG, ++ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, ++ .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, ++}; ++ ++ ++static struct usb_qualifier_descriptor ++dev_qualifier = { ++ .bLength = sizeof dev_qualifier, ++ .bDescriptorType = USB_DT_DEVICE_QUALIFIER, ++ ++ .bcdUSB = cpu_to_le16(0x0200), ++ .bDeviceClass = USB_CLASS_PER_INTERFACE, ++ ++ .bNumConfigurations = 1, ++}; ++ ++static int populate_bos(struct fsg_dev *fsg, u8 *buf) ++{ ++ memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE); ++ buf += USB_DT_BOS_SIZE; ++ ++ memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE); ++ buf += USB_DT_USB_EXT_CAP_SIZE; ++ ++ memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE); ++ ++ return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE ++ + USB_DT_USB_EXT_CAP_SIZE; ++} ++ ++/* ++ * Config descriptors must agree with the code that sets configurations ++ * and with code managing interfaces and their altsettings. They must ++ * also handle different speeds and other-speed requests. ++ */ ++static int populate_config_buf(struct usb_gadget *gadget, ++ u8 *buf, u8 type, unsigned index) ++{ ++ enum usb_device_speed speed = gadget->speed; ++ int len; ++ const struct usb_descriptor_header **function; ++ ++ if (index > 0) ++ return -EINVAL; ++ ++ if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG) ++ speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed; ++ function = gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH ++ ? (const struct usb_descriptor_header **)fsg_hs_function ++ : (const struct usb_descriptor_header **)fsg_fs_function; ++ ++ /* for now, don't advertise srp-only devices */ ++ if (!gadget_is_otg(gadget)) ++ function++; ++ ++ len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function); ++ ((struct usb_config_descriptor *) buf)->bDescriptorType = type; ++ return len; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* These routines may be called in process context or in_irq */ ++ ++/* Caller must hold fsg->lock */ ++static void wakeup_thread(struct fsg_dev *fsg) ++{ ++ /* Tell the main thread that something has happened */ ++ fsg->thread_wakeup_needed = 1; ++ if (fsg->thread_task) ++ wake_up_process(fsg->thread_task); ++} ++ ++ ++static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state) ++{ ++ unsigned long flags; ++ ++ /* Do nothing if a higher-priority exception is already in progress. ++ * If a lower-or-equal priority exception is in progress, preempt it ++ * and notify the main thread by sending it a signal. */ ++ spin_lock_irqsave(&fsg->lock, flags); ++ if (fsg->state <= new_state) { ++ fsg->exception_req_tag = fsg->ep0_req_tag; ++ fsg->state = new_state; ++ if (fsg->thread_task) ++ send_sig_info(SIGUSR1, SEND_SIG_FORCED, ++ fsg->thread_task); ++ } ++ spin_unlock_irqrestore(&fsg->lock, flags); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* The disconnect callback and ep0 routines. These always run in_irq, ++ * except that ep0_queue() is called in the main thread to acknowledge ++ * completion of various requests: set config, set interface, and ++ * Bulk-only device reset. */ ++ ++static void fsg_disconnect(struct usb_gadget *gadget) ++{ ++ struct fsg_dev *fsg = get_gadget_data(gadget); ++ ++ DBG(fsg, "disconnect or port reset\n"); ++ raise_exception(fsg, FSG_STATE_DISCONNECT); ++} ++ ++ ++static int ep0_queue(struct fsg_dev *fsg) ++{ ++ int rc; ++ ++ rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC); ++ if (rc != 0 && rc != -ESHUTDOWN) { ++ ++ /* We can't do much more than wait for a reset */ ++ WARNING(fsg, "error in submission: %s --> %d\n", ++ fsg->ep0->name, rc); ++ } ++ return rc; ++} ++ ++static void ep0_complete(struct usb_ep *ep, struct usb_request *req) ++{ ++ struct fsg_dev *fsg = ep->driver_data; ++ ++ if (req->actual > 0) ++ dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual); ++ if (req->status || req->actual != req->length) ++ DBG(fsg, "%s --> %d, %u/%u\n", __func__, ++ req->status, req->actual, req->length); ++ if (req->status == -ECONNRESET) // Request was cancelled ++ usb_ep_fifo_flush(ep); ++ ++ if (req->status == 0 && req->context) ++ ((fsg_routine_t) (req->context))(fsg); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Bulk and interrupt endpoint completion handlers. ++ * These always run in_irq. */ ++ ++static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) ++{ ++ struct fsg_dev *fsg = ep->driver_data; ++ struct fsg_buffhd *bh = req->context; ++ ++ if (req->status || req->actual != req->length) ++ DBG(fsg, "%s --> %d, %u/%u\n", __func__, ++ req->status, req->actual, req->length); ++ if (req->status == -ECONNRESET) // Request was cancelled ++ usb_ep_fifo_flush(ep); ++ ++ /* Hold the lock while we update the request and buffer states */ ++ smp_wmb(); ++ spin_lock(&fsg->lock); ++ bh->inreq_busy = 0; ++ bh->state = BUF_STATE_EMPTY; ++ wakeup_thread(fsg); ++ spin_unlock(&fsg->lock); ++} ++ ++static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) ++{ ++ struct fsg_dev *fsg = ep->driver_data; ++ struct fsg_buffhd *bh = req->context; ++ ++ dump_msg(fsg, "bulk-out", req->buf, req->actual); ++ if (req->status || req->actual != bh->bulk_out_intended_length) ++ DBG(fsg, "%s --> %d, %u/%u\n", __func__, ++ req->status, req->actual, ++ bh->bulk_out_intended_length); ++ if (req->status == -ECONNRESET) // Request was cancelled ++ usb_ep_fifo_flush(ep); ++ ++ /* Hold the lock while we update the request and buffer states */ ++ smp_wmb(); ++ spin_lock(&fsg->lock); ++ bh->outreq_busy = 0; ++ bh->state = BUF_STATE_FULL; ++ wakeup_thread(fsg); ++ spin_unlock(&fsg->lock); ++} ++ ++ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) ++{ ++ struct fsg_dev *fsg = ep->driver_data; ++ struct fsg_buffhd *bh = req->context; ++ ++ if (req->status || req->actual != req->length) ++ DBG(fsg, "%s --> %d, %u/%u\n", __func__, ++ req->status, req->actual, req->length); ++ if (req->status == -ECONNRESET) // Request was cancelled ++ usb_ep_fifo_flush(ep); ++ ++ /* Hold the lock while we update the request and buffer states */ ++ smp_wmb(); ++ spin_lock(&fsg->lock); ++ fsg->intreq_busy = 0; ++ bh->state = BUF_STATE_EMPTY; ++ wakeup_thread(fsg); ++ spin_unlock(&fsg->lock); ++} ++ ++#else ++static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) ++{} ++#endif /* CONFIG_USB_FILE_STORAGE_TEST */ ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Ep0 class-specific handlers. These always run in_irq. */ ++ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct usb_request *req = fsg->ep0req; ++ static u8 cbi_reset_cmnd[6] = { ++ SEND_DIAGNOSTIC, 4, 0xff, 0xff, 0xff, 0xff}; ++ ++ /* Error in command transfer? */ ++ if (req->status || req->length != req->actual || ++ req->actual < 6 || req->actual > MAX_COMMAND_SIZE) { ++ ++ /* Not all controllers allow a protocol stall after ++ * receiving control-out data, but we'll try anyway. */ ++ fsg_set_halt(fsg, fsg->ep0); ++ return; // Wait for reset ++ } ++ ++ /* Is it the special reset command? */ ++ if (req->actual >= sizeof cbi_reset_cmnd && ++ memcmp(req->buf, cbi_reset_cmnd, ++ sizeof cbi_reset_cmnd) == 0) { ++ ++ /* Raise an exception to stop the current operation ++ * and reinitialize our state. */ ++ DBG(fsg, "cbi reset request\n"); ++ raise_exception(fsg, FSG_STATE_RESET); ++ return; ++ } ++ ++ VDBG(fsg, "CB[I] accept device-specific command\n"); ++ spin_lock(&fsg->lock); ++ ++ /* Save the command for later */ ++ if (fsg->cbbuf_cmnd_size) ++ WARNING(fsg, "CB[I] overwriting previous command\n"); ++ fsg->cbbuf_cmnd_size = req->actual; ++ memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size); ++ ++ wakeup_thread(fsg); ++ spin_unlock(&fsg->lock); ++} ++ ++#else ++static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{} ++#endif /* CONFIG_USB_FILE_STORAGE_TEST */ ++ ++ ++static int class_setup_req(struct fsg_dev *fsg, ++ const struct usb_ctrlrequest *ctrl) ++{ ++ struct usb_request *req = fsg->ep0req; ++ int value = -EOPNOTSUPP; ++ u16 w_index = le16_to_cpu(ctrl->wIndex); ++ u16 w_value = le16_to_cpu(ctrl->wValue); ++ u16 w_length = le16_to_cpu(ctrl->wLength); ++ ++ if (!fsg->config) ++ return value; ++ ++ /* Handle Bulk-only class-specific requests */ ++ if (transport_is_bbb()) { ++ switch (ctrl->bRequest) { ++ ++ case US_BULK_RESET_REQUEST: ++ if (ctrl->bRequestType != (USB_DIR_OUT | ++ USB_TYPE_CLASS | USB_RECIP_INTERFACE)) ++ break; ++ if (w_index != 0 || w_value != 0 || w_length != 0) { ++ value = -EDOM; ++ break; ++ } ++ ++ /* Raise an exception to stop the current operation ++ * and reinitialize our state. */ ++ DBG(fsg, "bulk reset request\n"); ++ raise_exception(fsg, FSG_STATE_RESET); ++ value = DELAYED_STATUS; ++ break; ++ ++ case US_BULK_GET_MAX_LUN: ++ if (ctrl->bRequestType != (USB_DIR_IN | ++ USB_TYPE_CLASS | USB_RECIP_INTERFACE)) ++ break; ++ if (w_index != 0 || w_value != 0 || w_length != 1) { ++ value = -EDOM; ++ break; ++ } ++ VDBG(fsg, "get max LUN\n"); ++ *(u8 *) req->buf = fsg->nluns - 1; ++ value = 1; ++ break; ++ } ++ } ++ ++ /* Handle CBI class-specific requests */ ++ else { ++ switch (ctrl->bRequest) { ++ ++ case USB_CBI_ADSC_REQUEST: ++ if (ctrl->bRequestType != (USB_DIR_OUT | ++ USB_TYPE_CLASS | USB_RECIP_INTERFACE)) ++ break; ++ if (w_index != 0 || w_value != 0) { ++ value = -EDOM; ++ break; ++ } ++ if (w_length > MAX_COMMAND_SIZE) { ++ value = -EOVERFLOW; ++ break; ++ } ++ value = w_length; ++ fsg->ep0req->context = received_cbi_adsc; ++ break; ++ } ++ } ++ ++ if (value == -EOPNOTSUPP) ++ VDBG(fsg, ++ "unknown class-specific control req " ++ "%02x.%02x v%04x i%04x l%u\n", ++ ctrl->bRequestType, ctrl->bRequest, ++ le16_to_cpu(ctrl->wValue), w_index, w_length); ++ return value; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Ep0 standard request handlers. These always run in_irq. */ ++ ++static int standard_setup_req(struct fsg_dev *fsg, ++ const struct usb_ctrlrequest *ctrl) ++{ ++ struct usb_request *req = fsg->ep0req; ++ int value = -EOPNOTSUPP; ++ u16 w_index = le16_to_cpu(ctrl->wIndex); ++ u16 w_value = le16_to_cpu(ctrl->wValue); ++ ++ /* Usually this just stores reply data in the pre-allocated ep0 buffer, ++ * but config change events will also reconfigure hardware. */ ++ switch (ctrl->bRequest) { ++ ++ case USB_REQ_GET_DESCRIPTOR: ++ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | ++ USB_RECIP_DEVICE)) ++ break; ++ switch (w_value >> 8) { ++ ++ case USB_DT_DEVICE: ++ VDBG(fsg, "get device descriptor\n"); ++ device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket; ++ value = sizeof device_desc; ++ memcpy(req->buf, &device_desc, value); ++ break; ++ case USB_DT_DEVICE_QUALIFIER: ++ VDBG(fsg, "get device qualifier\n"); ++ if (!gadget_is_dualspeed(fsg->gadget) || ++ fsg->gadget->speed == USB_SPEED_SUPER) ++ break; ++ /* ++ * Assume ep0 uses the same maxpacket value for both ++ * speeds ++ */ ++ dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket; ++ value = sizeof dev_qualifier; ++ memcpy(req->buf, &dev_qualifier, value); ++ break; ++ ++ case USB_DT_OTHER_SPEED_CONFIG: ++ VDBG(fsg, "get other-speed config descriptor\n"); ++ if (!gadget_is_dualspeed(fsg->gadget) || ++ fsg->gadget->speed == USB_SPEED_SUPER) ++ break; ++ goto get_config; ++ case USB_DT_CONFIG: ++ VDBG(fsg, "get configuration descriptor\n"); ++get_config: ++ value = populate_config_buf(fsg->gadget, ++ req->buf, ++ w_value >> 8, ++ w_value & 0xff); ++ break; ++ ++ case USB_DT_STRING: ++ VDBG(fsg, "get string descriptor\n"); ++ ++ /* wIndex == language code */ ++ value = usb_gadget_get_string(&fsg_stringtab, ++ w_value & 0xff, req->buf); ++ break; ++ ++ case USB_DT_BOS: ++ VDBG(fsg, "get bos descriptor\n"); ++ ++ if (gadget_is_superspeed(fsg->gadget)) ++ value = populate_bos(fsg, req->buf); ++ break; ++ } ++ ++ break; ++ ++ /* One config, two speeds */ ++ case USB_REQ_SET_CONFIGURATION: ++ if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD | ++ USB_RECIP_DEVICE)) ++ break; ++ VDBG(fsg, "set configuration\n"); ++ if (w_value == CONFIG_VALUE || w_value == 0) { ++ fsg->new_config = w_value; ++ ++ /* Raise an exception to wipe out previous transaction ++ * state (queued bufs, etc) and set the new config. */ ++ raise_exception(fsg, FSG_STATE_CONFIG_CHANGE); ++ value = DELAYED_STATUS; ++ } ++ break; ++ case USB_REQ_GET_CONFIGURATION: ++ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | ++ USB_RECIP_DEVICE)) ++ break; ++ VDBG(fsg, "get configuration\n"); ++ *(u8 *) req->buf = fsg->config; ++ value = 1; ++ break; ++ ++ case USB_REQ_SET_INTERFACE: ++ if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD | ++ USB_RECIP_INTERFACE)) ++ break; ++ if (fsg->config && w_index == 0) { ++ ++ /* Raise an exception to wipe out previous transaction ++ * state (queued bufs, etc) and install the new ++ * interface altsetting. */ ++ raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE); ++ value = DELAYED_STATUS; ++ } ++ break; ++ case USB_REQ_GET_INTERFACE: ++ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | ++ USB_RECIP_INTERFACE)) ++ break; ++ if (!fsg->config) ++ break; ++ if (w_index != 0) { ++ value = -EDOM; ++ break; ++ } ++ VDBG(fsg, "get interface\n"); ++ *(u8 *) req->buf = 0; ++ value = 1; ++ break; ++ ++ default: ++ VDBG(fsg, ++ "unknown control req %02x.%02x v%04x i%04x l%u\n", ++ ctrl->bRequestType, ctrl->bRequest, ++ w_value, w_index, le16_to_cpu(ctrl->wLength)); ++ } ++ ++ return value; ++} ++ ++ ++static int fsg_setup(struct usb_gadget *gadget, ++ const struct usb_ctrlrequest *ctrl) ++{ ++ struct fsg_dev *fsg = get_gadget_data(gadget); ++ int rc; ++ int w_length = le16_to_cpu(ctrl->wLength); ++ ++ ++fsg->ep0_req_tag; // Record arrival of a new request ++ fsg->ep0req->context = NULL; ++ fsg->ep0req->length = 0; ++ dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl)); ++ ++ if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) ++ rc = class_setup_req(fsg, ctrl); ++ else ++ rc = standard_setup_req(fsg, ctrl); ++ ++ /* Respond with data/status or defer until later? */ ++ if (rc >= 0 && rc != DELAYED_STATUS) { ++ rc = min(rc, w_length); ++ fsg->ep0req->length = rc; ++ fsg->ep0req->zero = rc < w_length; ++ fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ? ++ "ep0-in" : "ep0-out"); ++ rc = ep0_queue(fsg); ++ } ++ ++ /* Device either stalls (rc < 0) or reports success */ ++ return rc; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* All the following routines run in process context */ ++ ++ ++/* Use this for bulk or interrupt transfers, not ep0 */ ++static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, ++ struct usb_request *req, int *pbusy, ++ enum fsg_buffer_state *state) ++{ ++ int rc; ++ ++ if (ep == fsg->bulk_in) ++ dump_msg(fsg, "bulk-in", req->buf, req->length); ++ else if (ep == fsg->intr_in) ++ dump_msg(fsg, "intr-in", req->buf, req->length); ++ ++ spin_lock_irq(&fsg->lock); ++ *pbusy = 1; ++ *state = BUF_STATE_BUSY; ++ spin_unlock_irq(&fsg->lock); ++ rc = usb_ep_queue(ep, req, GFP_KERNEL); ++ if (rc != 0) { ++ *pbusy = 0; ++ *state = BUF_STATE_EMPTY; ++ ++ /* We can't do much more than wait for a reset */ ++ ++ /* Note: currently the net2280 driver fails zero-length ++ * submissions if DMA is enabled. */ ++ if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP && ++ req->length == 0)) ++ WARNING(fsg, "error in submission: %s --> %d\n", ++ ep->name, rc); ++ } ++} ++ ++ ++static int sleep_thread(struct fsg_dev *fsg) ++{ ++ int rc = 0; ++ ++ /* Wait until a signal arrives or we are woken up */ ++ for (;;) { ++ try_to_freeze(); ++ set_current_state(TASK_INTERRUPTIBLE); ++ if (signal_pending(current)) { ++ rc = -EINTR; ++ break; ++ } ++ if (fsg->thread_wakeup_needed) ++ break; ++ schedule(); ++ } ++ __set_current_state(TASK_RUNNING); ++ fsg->thread_wakeup_needed = 0; ++ return rc; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int do_read(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u32 lba; ++ struct fsg_buffhd *bh; ++ int rc; ++ u32 amount_left; ++ loff_t file_offset, file_offset_tmp; ++ unsigned int amount; ++ ssize_t nread; ++ ++ /* Get the starting Logical Block Address and check that it's ++ * not too big */ ++ if (fsg->cmnd[0] == READ_6) ++ lba = get_unaligned_be24(&fsg->cmnd[1]); ++ else { ++ lba = get_unaligned_be32(&fsg->cmnd[2]); ++ ++ /* We allow DPO (Disable Page Out = don't save data in the ++ * cache) and FUA (Force Unit Access = don't read from the ++ * cache), but we don't implement them. */ ++ if ((fsg->cmnd[1] & ~0x18) != 0) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ } ++ if (lba >= curlun->num_sectors) { ++ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ return -EINVAL; ++ } ++ file_offset = ((loff_t) lba) << curlun->blkbits; ++ ++ /* Carry out the file reads */ ++ amount_left = fsg->data_size_from_cmnd; ++ if (unlikely(amount_left == 0)) ++ return -EIO; // No default reply ++ ++ for (;;) { ++ ++ /* Figure out how much we need to read: ++ * Try to read the remaining amount. ++ * But don't read more than the buffer size. ++ * And don't try to read past the end of the file. ++ */ ++ amount = min((unsigned int) amount_left, mod_data.buflen); ++ amount = min((loff_t) amount, ++ curlun->file_length - file_offset); ++ ++ /* Wait for the next buffer to become available */ ++ bh = fsg->next_buffhd_to_fill; ++ while (bh->state != BUF_STATE_EMPTY) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ ++ /* If we were asked to read past the end of file, ++ * end with an empty buffer. */ ++ if (amount == 0) { ++ curlun->sense_data = ++ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ bh->inreq->length = 0; ++ bh->state = BUF_STATE_FULL; ++ break; ++ } ++ ++ /* Perform the read */ ++ file_offset_tmp = file_offset; ++ nread = vfs_read(curlun->filp, ++ (char __user *) bh->buf, ++ amount, &file_offset_tmp); ++ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, ++ (unsigned long long) file_offset, ++ (int) nread); ++ if (signal_pending(current)) ++ return -EINTR; ++ ++ if (nread < 0) { ++ LDBG(curlun, "error in file read: %d\n", ++ (int) nread); ++ nread = 0; ++ } else if (nread < amount) { ++ LDBG(curlun, "partial file read: %d/%u\n", ++ (int) nread, amount); ++ nread = round_down(nread, curlun->blksize); ++ } ++ file_offset += nread; ++ amount_left -= nread; ++ fsg->residue -= nread; ++ ++ /* Except at the end of the transfer, nread will be ++ * equal to the buffer size, which is divisible by the ++ * bulk-in maxpacket size. ++ */ ++ bh->inreq->length = nread; ++ bh->state = BUF_STATE_FULL; ++ ++ /* If an error occurred, report it and its position */ ++ if (nread < amount) { ++ curlun->sense_data = SS_UNRECOVERED_READ_ERROR; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ break; ++ } ++ ++ if (amount_left == 0) ++ break; // No more left to read ++ ++ /* Send this buffer and go read some more */ ++ bh->inreq->zero = 0; ++ start_transfer(fsg, fsg->bulk_in, bh->inreq, ++ &bh->inreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ } ++ ++ return -EIO; // No default reply ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int do_write(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u32 lba; ++ struct fsg_buffhd *bh; ++ int get_some_more; ++ u32 amount_left_to_req, amount_left_to_write; ++ loff_t usb_offset, file_offset, file_offset_tmp; ++ unsigned int amount; ++ ssize_t nwritten; ++ int rc; ++ ++ if (curlun->ro) { ++ curlun->sense_data = SS_WRITE_PROTECTED; ++ return -EINVAL; ++ } ++ spin_lock(&curlun->filp->f_lock); ++ curlun->filp->f_flags &= ~O_SYNC; // Default is not to wait ++ spin_unlock(&curlun->filp->f_lock); ++ ++ /* Get the starting Logical Block Address and check that it's ++ * not too big */ ++ if (fsg->cmnd[0] == WRITE_6) ++ lba = get_unaligned_be24(&fsg->cmnd[1]); ++ else { ++ lba = get_unaligned_be32(&fsg->cmnd[2]); ++ ++ /* We allow DPO (Disable Page Out = don't save data in the ++ * cache) and FUA (Force Unit Access = write directly to the ++ * medium). We don't implement DPO; we implement FUA by ++ * performing synchronous output. */ ++ if ((fsg->cmnd[1] & ~0x18) != 0) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ /* FUA */ ++ if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) { ++ spin_lock(&curlun->filp->f_lock); ++ curlun->filp->f_flags |= O_DSYNC; ++ spin_unlock(&curlun->filp->f_lock); ++ } ++ } ++ if (lba >= curlun->num_sectors) { ++ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ return -EINVAL; ++ } ++ ++ /* Carry out the file writes */ ++ get_some_more = 1; ++ file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; ++ amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd; ++ ++ while (amount_left_to_write > 0) { ++ ++ /* Queue a request for more data from the host */ ++ bh = fsg->next_buffhd_to_fill; ++ if (bh->state == BUF_STATE_EMPTY && get_some_more) { ++ ++ /* Figure out how much we want to get: ++ * Try to get the remaining amount, ++ * but not more than the buffer size. ++ */ ++ amount = min(amount_left_to_req, mod_data.buflen); ++ ++ /* Beyond the end of the backing file? */ ++ if (usb_offset >= curlun->file_length) { ++ get_some_more = 0; ++ curlun->sense_data = ++ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ curlun->sense_data_info = usb_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ continue; ++ } ++ ++ /* Get the next buffer */ ++ usb_offset += amount; ++ fsg->usb_amount_left -= amount; ++ amount_left_to_req -= amount; ++ if (amount_left_to_req == 0) ++ get_some_more = 0; ++ ++ /* Except at the end of the transfer, amount will be ++ * equal to the buffer size, which is divisible by ++ * the bulk-out maxpacket size. ++ */ ++ set_bulk_out_req_length(fsg, bh, amount); ++ start_transfer(fsg, fsg->bulk_out, bh->outreq, ++ &bh->outreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ continue; ++ } ++ ++ /* Write the received data to the backing file */ ++ bh = fsg->next_buffhd_to_drain; ++ if (bh->state == BUF_STATE_EMPTY && !get_some_more) ++ break; // We stopped early ++ if (bh->state == BUF_STATE_FULL) { ++ smp_rmb(); ++ fsg->next_buffhd_to_drain = bh->next; ++ bh->state = BUF_STATE_EMPTY; ++ ++ /* Did something go wrong with the transfer? */ ++ if (bh->outreq->status != 0) { ++ curlun->sense_data = SS_COMMUNICATION_FAILURE; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ break; ++ } ++ ++ amount = bh->outreq->actual; ++ if (curlun->file_length - file_offset < amount) { ++ LERROR(curlun, ++ "write %u @ %llu beyond end %llu\n", ++ amount, (unsigned long long) file_offset, ++ (unsigned long long) curlun->file_length); ++ amount = curlun->file_length - file_offset; ++ } ++ ++ /* Don't accept excess data. The spec doesn't say ++ * what to do in this case. We'll ignore the error. ++ */ ++ amount = min(amount, bh->bulk_out_intended_length); ++ ++ /* Don't write a partial block */ ++ amount = round_down(amount, curlun->blksize); ++ if (amount == 0) ++ goto empty_write; ++ ++ /* Perform the write */ ++ file_offset_tmp = file_offset; ++ nwritten = vfs_write(curlun->filp, ++ (char __user *) bh->buf, ++ amount, &file_offset_tmp); ++ VLDBG(curlun, "file write %u @ %llu -> %d\n", amount, ++ (unsigned long long) file_offset, ++ (int) nwritten); ++ if (signal_pending(current)) ++ return -EINTR; // Interrupted! ++ ++ if (nwritten < 0) { ++ LDBG(curlun, "error in file write: %d\n", ++ (int) nwritten); ++ nwritten = 0; ++ } else if (nwritten < amount) { ++ LDBG(curlun, "partial file write: %d/%u\n", ++ (int) nwritten, amount); ++ nwritten = round_down(nwritten, curlun->blksize); ++ } ++ file_offset += nwritten; ++ amount_left_to_write -= nwritten; ++ fsg->residue -= nwritten; ++ ++ /* If an error occurred, report it and its position */ ++ if (nwritten < amount) { ++ curlun->sense_data = SS_WRITE_ERROR; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ break; ++ } ++ ++ empty_write: ++ /* Did the host decide to stop early? */ ++ if (bh->outreq->actual < bh->bulk_out_intended_length) { ++ fsg->short_packet_received = 1; ++ break; ++ } ++ continue; ++ } ++ ++ /* Wait for something to happen */ ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ ++ return -EIO; // No default reply ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int do_synchronize_cache(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int rc; ++ ++ /* We ignore the requested LBA and write out all file's ++ * dirty data buffers. */ ++ rc = fsg_lun_fsync_sub(curlun); ++ if (rc) ++ curlun->sense_data = SS_WRITE_ERROR; ++ return 0; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void invalidate_sub(struct fsg_lun *curlun) ++{ ++ struct file *filp = curlun->filp; ++ struct inode *inode = filp->f_path.dentry->d_inode; ++ unsigned long rc; ++ ++ rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); ++ VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc); ++} ++ ++static int do_verify(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u32 lba; ++ u32 verification_length; ++ struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; ++ loff_t file_offset, file_offset_tmp; ++ u32 amount_left; ++ unsigned int amount; ++ ssize_t nread; ++ ++ /* Get the starting Logical Block Address and check that it's ++ * not too big */ ++ lba = get_unaligned_be32(&fsg->cmnd[2]); ++ if (lba >= curlun->num_sectors) { ++ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ return -EINVAL; ++ } ++ ++ /* We allow DPO (Disable Page Out = don't save data in the ++ * cache) but we don't implement it. */ ++ if ((fsg->cmnd[1] & ~0x10) != 0) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ verification_length = get_unaligned_be16(&fsg->cmnd[7]); ++ if (unlikely(verification_length == 0)) ++ return -EIO; // No default reply ++ ++ /* Prepare to carry out the file verify */ ++ amount_left = verification_length << curlun->blkbits; ++ file_offset = ((loff_t) lba) << curlun->blkbits; ++ ++ /* Write out all the dirty buffers before invalidating them */ ++ fsg_lun_fsync_sub(curlun); ++ if (signal_pending(current)) ++ return -EINTR; ++ ++ invalidate_sub(curlun); ++ if (signal_pending(current)) ++ return -EINTR; ++ ++ /* Just try to read the requested blocks */ ++ while (amount_left > 0) { ++ ++ /* Figure out how much we need to read: ++ * Try to read the remaining amount, but not more than ++ * the buffer size. ++ * And don't try to read past the end of the file. ++ */ ++ amount = min((unsigned int) amount_left, mod_data.buflen); ++ amount = min((loff_t) amount, ++ curlun->file_length - file_offset); ++ if (amount == 0) { ++ curlun->sense_data = ++ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ break; ++ } ++ ++ /* Perform the read */ ++ file_offset_tmp = file_offset; ++ nread = vfs_read(curlun->filp, ++ (char __user *) bh->buf, ++ amount, &file_offset_tmp); ++ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, ++ (unsigned long long) file_offset, ++ (int) nread); ++ if (signal_pending(current)) ++ return -EINTR; ++ ++ if (nread < 0) { ++ LDBG(curlun, "error in file verify: %d\n", ++ (int) nread); ++ nread = 0; ++ } else if (nread < amount) { ++ LDBG(curlun, "partial file verify: %d/%u\n", ++ (int) nread, amount); ++ nread = round_down(nread, curlun->blksize); ++ } ++ if (nread == 0) { ++ curlun->sense_data = SS_UNRECOVERED_READ_ERROR; ++ curlun->sense_data_info = file_offset >> curlun->blkbits; ++ curlun->info_valid = 1; ++ break; ++ } ++ file_offset += nread; ++ amount_left -= nread; ++ } ++ return 0; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ u8 *buf = (u8 *) bh->buf; ++ ++ static char vendor_id[] = "Linux "; ++ static char product_disk_id[] = "File-Stor Gadget"; ++ static char product_cdrom_id[] = "File-CD Gadget "; ++ ++ if (!fsg->curlun) { // Unsupported LUNs are okay ++ fsg->bad_lun_okay = 1; ++ memset(buf, 0, 36); ++ buf[0] = 0x7f; // Unsupported, no device-type ++ buf[4] = 31; // Additional length ++ return 36; ++ } ++ ++ memset(buf, 0, 8); ++ buf[0] = (mod_data.cdrom ? TYPE_ROM : TYPE_DISK); ++ if (mod_data.removable) ++ buf[1] = 0x80; ++ buf[2] = 2; // ANSI SCSI level 2 ++ buf[3] = 2; // SCSI-2 INQUIRY data format ++ buf[4] = 31; // Additional length ++ // No special options ++ sprintf(buf + 8, "%-8s%-16s%04x", vendor_id, ++ (mod_data.cdrom ? product_cdrom_id : ++ product_disk_id), ++ mod_data.release); ++ return 36; ++} ++ ++ ++static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u8 *buf = (u8 *) bh->buf; ++ u32 sd, sdinfo; ++ int valid; ++ ++ /* ++ * From the SCSI-2 spec., section 7.9 (Unit attention condition): ++ * ++ * If a REQUEST SENSE command is received from an initiator ++ * with a pending unit attention condition (before the target ++ * generates the contingent allegiance condition), then the ++ * target shall either: ++ * a) report any pending sense data and preserve the unit ++ * attention condition on the logical unit, or, ++ * b) report the unit attention condition, may discard any ++ * pending sense data, and clear the unit attention ++ * condition on the logical unit for that initiator. ++ * ++ * FSG normally uses option a); enable this code to use option b). ++ */ ++#if 0 ++ if (curlun && curlun->unit_attention_data != SS_NO_SENSE) { ++ curlun->sense_data = curlun->unit_attention_data; ++ curlun->unit_attention_data = SS_NO_SENSE; ++ } ++#endif ++ ++ if (!curlun) { // Unsupported LUNs are okay ++ fsg->bad_lun_okay = 1; ++ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; ++ sdinfo = 0; ++ valid = 0; ++ } else { ++ sd = curlun->sense_data; ++ sdinfo = curlun->sense_data_info; ++ valid = curlun->info_valid << 7; ++ curlun->sense_data = SS_NO_SENSE; ++ curlun->sense_data_info = 0; ++ curlun->info_valid = 0; ++ } ++ ++ memset(buf, 0, 18); ++ buf[0] = valid | 0x70; // Valid, current error ++ buf[2] = SK(sd); ++ put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */ ++ buf[7] = 18 - 8; // Additional sense length ++ buf[12] = ASC(sd); ++ buf[13] = ASCQ(sd); ++ return 18; ++} ++ ++ ++static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u32 lba = get_unaligned_be32(&fsg->cmnd[2]); ++ int pmi = fsg->cmnd[8]; ++ u8 *buf = (u8 *) bh->buf; ++ ++ /* Check the PMI and LBA fields */ ++ if (pmi > 1 || (pmi == 0 && lba != 0)) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); ++ /* Max logical block */ ++ put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ ++ return 8; ++} ++ ++ ++static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int msf = fsg->cmnd[1] & 0x02; ++ u32 lba = get_unaligned_be32(&fsg->cmnd[2]); ++ u8 *buf = (u8 *) bh->buf; ++ ++ if ((fsg->cmnd[1] & ~0x02) != 0) { /* Mask away MSF */ ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ if (lba >= curlun->num_sectors) { ++ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; ++ return -EINVAL; ++ } ++ ++ memset(buf, 0, 8); ++ buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */ ++ store_cdrom_address(&buf[4], msf, lba); ++ return 8; ++} ++ ++ ++static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int msf = fsg->cmnd[1] & 0x02; ++ int start_track = fsg->cmnd[6]; ++ u8 *buf = (u8 *) bh->buf; ++ ++ if ((fsg->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */ ++ start_track > 1) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ memset(buf, 0, 20); ++ buf[1] = (20-2); /* TOC data length */ ++ buf[2] = 1; /* First track number */ ++ buf[3] = 1; /* Last track number */ ++ buf[5] = 0x16; /* Data track, copying allowed */ ++ buf[6] = 0x01; /* Only track is number 1 */ ++ store_cdrom_address(&buf[8], msf, 0); ++ ++ buf[13] = 0x16; /* Lead-out track is data */ ++ buf[14] = 0xAA; /* Lead-out track number */ ++ store_cdrom_address(&buf[16], msf, curlun->num_sectors); ++ return 20; ++} ++ ++ ++static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int mscmnd = fsg->cmnd[0]; ++ u8 *buf = (u8 *) bh->buf; ++ u8 *buf0 = buf; ++ int pc, page_code; ++ int changeable_values, all_pages; ++ int valid_page = 0; ++ int len, limit; ++ ++ if ((fsg->cmnd[1] & ~0x08) != 0) { // Mask away DBD ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ pc = fsg->cmnd[2] >> 6; ++ page_code = fsg->cmnd[2] & 0x3f; ++ if (pc == 3) { ++ curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED; ++ return -EINVAL; ++ } ++ changeable_values = (pc == 1); ++ all_pages = (page_code == 0x3f); ++ ++ /* Write the mode parameter header. Fixed values are: default ++ * medium type, no cache control (DPOFUA), and no block descriptors. ++ * The only variable value is the WriteProtect bit. We will fill in ++ * the mode data length later. */ ++ memset(buf, 0, 8); ++ if (mscmnd == MODE_SENSE) { ++ buf[2] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA ++ buf += 4; ++ limit = 255; ++ } else { // MODE_SENSE_10 ++ buf[3] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA ++ buf += 8; ++ limit = 65535; // Should really be mod_data.buflen ++ } ++ ++ /* No block descriptors */ ++ ++ /* The mode pages, in numerical order. The only page we support ++ * is the Caching page. */ ++ if (page_code == 0x08 || all_pages) { ++ valid_page = 1; ++ buf[0] = 0x08; // Page code ++ buf[1] = 10; // Page length ++ memset(buf+2, 0, 10); // None of the fields are changeable ++ ++ if (!changeable_values) { ++ buf[2] = 0x04; // Write cache enable, ++ // Read cache not disabled ++ // No cache retention priorities ++ put_unaligned_be16(0xffff, &buf[4]); ++ /* Don't disable prefetch */ ++ /* Minimum prefetch = 0 */ ++ put_unaligned_be16(0xffff, &buf[8]); ++ /* Maximum prefetch */ ++ put_unaligned_be16(0xffff, &buf[10]); ++ /* Maximum prefetch ceiling */ ++ } ++ buf += 12; ++ } ++ ++ /* Check that a valid page was requested and the mode data length ++ * isn't too long. */ ++ len = buf - buf0; ++ if (!valid_page || len > limit) { ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ /* Store the mode data length */ ++ if (mscmnd == MODE_SENSE) ++ buf0[0] = len - 1; ++ else ++ put_unaligned_be16(len - 2, buf0); ++ return len; ++} ++ ++ ++static int do_start_stop(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int loej, start; ++ ++ if (!mod_data.removable) { ++ curlun->sense_data = SS_INVALID_COMMAND; ++ return -EINVAL; ++ } ++ ++ // int immed = fsg->cmnd[1] & 0x01; ++ loej = fsg->cmnd[4] & 0x02; ++ start = fsg->cmnd[4] & 0x01; ++ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++ if ((fsg->cmnd[1] & ~0x01) != 0 || // Mask away Immed ++ (fsg->cmnd[4] & ~0x03) != 0) { // Mask LoEj, Start ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ if (!start) { ++ ++ /* Are we allowed to unload the media? */ ++ if (curlun->prevent_medium_removal) { ++ LDBG(curlun, "unload attempt prevented\n"); ++ curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; ++ return -EINVAL; ++ } ++ if (loej) { // Simulate an unload/eject ++ up_read(&fsg->filesem); ++ down_write(&fsg->filesem); ++ fsg_lun_close(curlun); ++ up_write(&fsg->filesem); ++ down_read(&fsg->filesem); ++ } ++ } else { ++ ++ /* Our emulation doesn't support mounting; the medium is ++ * available for use as soon as it is loaded. */ ++ if (!fsg_lun_is_open(curlun)) { ++ curlun->sense_data = SS_MEDIUM_NOT_PRESENT; ++ return -EINVAL; ++ } ++ } ++#endif ++ return 0; ++} ++ ++ ++static int do_prevent_allow(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ int prevent; ++ ++ if (!mod_data.removable) { ++ curlun->sense_data = SS_INVALID_COMMAND; ++ return -EINVAL; ++ } ++ ++ prevent = fsg->cmnd[4] & 0x01; ++ if ((fsg->cmnd[4] & ~0x01) != 0) { // Mask away Prevent ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ ++ if (curlun->prevent_medium_removal && !prevent) ++ fsg_lun_fsync_sub(curlun); ++ curlun->prevent_medium_removal = prevent; ++ return 0; ++} ++ ++ ++static int do_read_format_capacities(struct fsg_dev *fsg, ++ struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ u8 *buf = (u8 *) bh->buf; ++ ++ buf[0] = buf[1] = buf[2] = 0; ++ buf[3] = 8; // Only the Current/Maximum Capacity Descriptor ++ buf += 4; ++ ++ put_unaligned_be32(curlun->num_sectors, &buf[0]); ++ /* Number of blocks */ ++ put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ ++ buf[4] = 0x02; /* Current capacity */ ++ return 12; ++} ++ ++ ++static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ ++ /* We don't support MODE SELECT */ ++ curlun->sense_data = SS_INVALID_COMMAND; ++ return -EINVAL; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int halt_bulk_in_endpoint(struct fsg_dev *fsg) ++{ ++ int rc; ++ ++ rc = fsg_set_halt(fsg, fsg->bulk_in); ++ if (rc == -EAGAIN) ++ VDBG(fsg, "delayed bulk-in endpoint halt\n"); ++ while (rc != 0) { ++ if (rc != -EAGAIN) { ++ WARNING(fsg, "usb_ep_set_halt -> %d\n", rc); ++ rc = 0; ++ break; ++ } ++ ++ /* Wait for a short time and then try again */ ++ if (msleep_interruptible(100) != 0) ++ return -EINTR; ++ rc = usb_ep_set_halt(fsg->bulk_in); ++ } ++ return rc; ++} ++ ++static int wedge_bulk_in_endpoint(struct fsg_dev *fsg) ++{ ++ int rc; ++ ++ DBG(fsg, "bulk-in set wedge\n"); ++ rc = usb_ep_set_wedge(fsg->bulk_in); ++ if (rc == -EAGAIN) ++ VDBG(fsg, "delayed bulk-in endpoint wedge\n"); ++ while (rc != 0) { ++ if (rc != -EAGAIN) { ++ WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc); ++ rc = 0; ++ break; ++ } ++ ++ /* Wait for a short time and then try again */ ++ if (msleep_interruptible(100) != 0) ++ return -EINTR; ++ rc = usb_ep_set_wedge(fsg->bulk_in); ++ } ++ return rc; ++} ++ ++static int throw_away_data(struct fsg_dev *fsg) ++{ ++ struct fsg_buffhd *bh; ++ u32 amount; ++ int rc; ++ ++ while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY || ++ fsg->usb_amount_left > 0) { ++ ++ /* Throw away the data in a filled buffer */ ++ if (bh->state == BUF_STATE_FULL) { ++ smp_rmb(); ++ bh->state = BUF_STATE_EMPTY; ++ fsg->next_buffhd_to_drain = bh->next; ++ ++ /* A short packet or an error ends everything */ ++ if (bh->outreq->actual < bh->bulk_out_intended_length || ++ bh->outreq->status != 0) { ++ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); ++ return -EINTR; ++ } ++ continue; ++ } ++ ++ /* Try to submit another request if we need one */ ++ bh = fsg->next_buffhd_to_fill; ++ if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) { ++ amount = min(fsg->usb_amount_left, ++ (u32) mod_data.buflen); ++ ++ /* Except at the end of the transfer, amount will be ++ * equal to the buffer size, which is divisible by ++ * the bulk-out maxpacket size. ++ */ ++ set_bulk_out_req_length(fsg, bh, amount); ++ start_transfer(fsg, fsg->bulk_out, bh->outreq, ++ &bh->outreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ fsg->usb_amount_left -= amount; ++ continue; ++ } ++ ++ /* Otherwise wait for something to happen */ ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ return 0; ++} ++ ++ ++static int finish_reply(struct fsg_dev *fsg) ++{ ++ struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; ++ int rc = 0; ++ ++ switch (fsg->data_dir) { ++ case DATA_DIR_NONE: ++ break; // Nothing to send ++ ++ /* If we don't know whether the host wants to read or write, ++ * this must be CB or CBI with an unknown command. We mustn't ++ * try to send or receive any data. So stall both bulk pipes ++ * if we can and wait for a reset. */ ++ case DATA_DIR_UNKNOWN: ++ if (mod_data.can_stall) { ++ fsg_set_halt(fsg, fsg->bulk_out); ++ rc = halt_bulk_in_endpoint(fsg); ++ } ++ break; ++ ++ /* All but the last buffer of data must have already been sent */ ++ case DATA_DIR_TO_HOST: ++ if (fsg->data_size == 0) ++ ; // Nothing to send ++ ++ /* If there's no residue, simply send the last buffer */ ++ else if (fsg->residue == 0) { ++ bh->inreq->zero = 0; ++ start_transfer(fsg, fsg->bulk_in, bh->inreq, ++ &bh->inreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ } ++ ++ /* There is a residue. For CB and CBI, simply mark the end ++ * of the data with a short packet. However, if we are ++ * allowed to stall, there was no data at all (residue == ++ * data_size), and the command failed (invalid LUN or ++ * sense data is set), then halt the bulk-in endpoint ++ * instead. */ ++ else if (!transport_is_bbb()) { ++ if (mod_data.can_stall && ++ fsg->residue == fsg->data_size && ++ (!fsg->curlun || fsg->curlun->sense_data != SS_NO_SENSE)) { ++ bh->state = BUF_STATE_EMPTY; ++ rc = halt_bulk_in_endpoint(fsg); ++ } else { ++ bh->inreq->zero = 1; ++ start_transfer(fsg, fsg->bulk_in, bh->inreq, ++ &bh->inreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ } ++ } ++ ++ /* ++ * For Bulk-only, mark the end of the data with a short ++ * packet. If we are allowed to stall, halt the bulk-in ++ * endpoint. (Note: This violates the Bulk-Only Transport ++ * specification, which requires us to pad the data if we ++ * don't halt the endpoint. Presumably nobody will mind.) ++ */ ++ else { ++ bh->inreq->zero = 1; ++ start_transfer(fsg, fsg->bulk_in, bh->inreq, ++ &bh->inreq_busy, &bh->state); ++ fsg->next_buffhd_to_fill = bh->next; ++ if (mod_data.can_stall) ++ rc = halt_bulk_in_endpoint(fsg); ++ } ++ break; ++ ++ /* We have processed all we want from the data the host has sent. ++ * There may still be outstanding bulk-out requests. */ ++ case DATA_DIR_FROM_HOST: ++ if (fsg->residue == 0) ++ ; // Nothing to receive ++ ++ /* Did the host stop sending unexpectedly early? */ ++ else if (fsg->short_packet_received) { ++ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); ++ rc = -EINTR; ++ } ++ ++ /* We haven't processed all the incoming data. Even though ++ * we may be allowed to stall, doing so would cause a race. ++ * The controller may already have ACK'ed all the remaining ++ * bulk-out packets, in which case the host wouldn't see a ++ * STALL. Not realizing the endpoint was halted, it wouldn't ++ * clear the halt -- leading to problems later on. */ ++#if 0 ++ else if (mod_data.can_stall) { ++ fsg_set_halt(fsg, fsg->bulk_out); ++ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); ++ rc = -EINTR; ++ } ++#endif ++ ++ /* We can't stall. Read in the excess data and throw it ++ * all away. */ ++ else ++ rc = throw_away_data(fsg); ++ break; ++ } ++ return rc; ++} ++ ++ ++static int send_status(struct fsg_dev *fsg) ++{ ++ struct fsg_lun *curlun = fsg->curlun; ++ struct fsg_buffhd *bh; ++ int rc; ++ u8 status = US_BULK_STAT_OK; ++ u32 sd, sdinfo = 0; ++ ++ /* Wait for the next buffer to become available */ ++ bh = fsg->next_buffhd_to_fill; ++ while (bh->state != BUF_STATE_EMPTY) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ ++ if (curlun) { ++ sd = curlun->sense_data; ++ sdinfo = curlun->sense_data_info; ++ } else if (fsg->bad_lun_okay) ++ sd = SS_NO_SENSE; ++ else ++ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; ++ ++ if (fsg->phase_error) { ++ DBG(fsg, "sending phase-error status\n"); ++ status = US_BULK_STAT_PHASE; ++ sd = SS_INVALID_COMMAND; ++ } else if (sd != SS_NO_SENSE) { ++ DBG(fsg, "sending command-failure status\n"); ++ status = US_BULK_STAT_FAIL; ++ VDBG(fsg, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;" ++ " info x%x\n", ++ SK(sd), ASC(sd), ASCQ(sd), sdinfo); ++ } ++ ++ if (transport_is_bbb()) { ++ struct bulk_cs_wrap *csw = bh->buf; ++ ++ /* Store and send the Bulk-only CSW */ ++ csw->Signature = cpu_to_le32(US_BULK_CS_SIGN); ++ csw->Tag = fsg->tag; ++ csw->Residue = cpu_to_le32(fsg->residue); ++ csw->Status = status; ++ ++ bh->inreq->length = US_BULK_CS_WRAP_LEN; ++ bh->inreq->zero = 0; ++ start_transfer(fsg, fsg->bulk_in, bh->inreq, ++ &bh->inreq_busy, &bh->state); ++ ++ } else if (mod_data.transport_type == USB_PR_CB) { ++ ++ /* Control-Bulk transport has no status phase! */ ++ return 0; ++ ++ } else { // USB_PR_CBI ++ struct interrupt_data *buf = bh->buf; ++ ++ /* Store and send the Interrupt data. UFI sends the ASC ++ * and ASCQ bytes. Everything else sends a Type (which ++ * is always 0) and the status Value. */ ++ if (mod_data.protocol_type == USB_SC_UFI) { ++ buf->bType = ASC(sd); ++ buf->bValue = ASCQ(sd); ++ } else { ++ buf->bType = 0; ++ buf->bValue = status; ++ } ++ fsg->intreq->length = CBI_INTERRUPT_DATA_LEN; ++ ++ fsg->intr_buffhd = bh; // Point to the right buffhd ++ fsg->intreq->buf = bh->inreq->buf; ++ fsg->intreq->context = bh; ++ start_transfer(fsg, fsg->intr_in, fsg->intreq, ++ &fsg->intreq_busy, &bh->state); ++ } ++ ++ fsg->next_buffhd_to_fill = bh->next; ++ return 0; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Check whether the command is properly formed and whether its data size ++ * and direction agree with the values we already have. */ ++static int check_command(struct fsg_dev *fsg, int cmnd_size, ++ enum data_direction data_dir, unsigned int mask, ++ int needs_medium, const char *name) ++{ ++ int i; ++ int lun = fsg->cmnd[1] >> 5; ++ static const char dirletter[4] = {'u', 'o', 'i', 'n'}; ++ char hdlen[20]; ++ struct fsg_lun *curlun; ++ ++ /* Adjust the expected cmnd_size for protocol encapsulation padding. ++ * Transparent SCSI doesn't pad. */ ++ if (protocol_is_scsi()) ++ ; ++ ++ /* There's some disagreement as to whether RBC pads commands or not. ++ * We'll play it safe and accept either form. */ ++ else if (mod_data.protocol_type == USB_SC_RBC) { ++ if (fsg->cmnd_size == 12) ++ cmnd_size = 12; ++ ++ /* All the other protocols pad to 12 bytes */ ++ } else ++ cmnd_size = 12; ++ ++ hdlen[0] = 0; ++ if (fsg->data_dir != DATA_DIR_UNKNOWN) ++ sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir], ++ fsg->data_size); ++ VDBG(fsg, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n", ++ name, cmnd_size, dirletter[(int) data_dir], ++ fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen); ++ ++ /* We can't reply at all until we know the correct data direction ++ * and size. */ ++ if (fsg->data_size_from_cmnd == 0) ++ data_dir = DATA_DIR_NONE; ++ if (fsg->data_dir == DATA_DIR_UNKNOWN) { // CB or CBI ++ fsg->data_dir = data_dir; ++ fsg->data_size = fsg->data_size_from_cmnd; ++ ++ } else { // Bulk-only ++ if (fsg->data_size < fsg->data_size_from_cmnd) { ++ ++ /* Host data size < Device data size is a phase error. ++ * Carry out the command, but only transfer as much ++ * as we are allowed. */ ++ fsg->data_size_from_cmnd = fsg->data_size; ++ fsg->phase_error = 1; ++ } ++ } ++ fsg->residue = fsg->usb_amount_left = fsg->data_size; ++ ++ /* Conflicting data directions is a phase error */ ++ if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) { ++ fsg->phase_error = 1; ++ return -EINVAL; ++ } ++ ++ /* Verify the length of the command itself */ ++ if (cmnd_size != fsg->cmnd_size) { ++ ++ /* Special case workaround: There are plenty of buggy SCSI ++ * implementations. Many have issues with cbw->Length ++ * field passing a wrong command size. For those cases we ++ * always try to work around the problem by using the length ++ * sent by the host side provided it is at least as large ++ * as the correct command length. ++ * Examples of such cases would be MS-Windows, which issues ++ * REQUEST SENSE with cbw->Length == 12 where it should ++ * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and ++ * REQUEST SENSE with cbw->Length == 10 where it should ++ * be 6 as well. ++ */ ++ if (cmnd_size <= fsg->cmnd_size) { ++ DBG(fsg, "%s is buggy! Expected length %d " ++ "but we got %d\n", name, ++ cmnd_size, fsg->cmnd_size); ++ cmnd_size = fsg->cmnd_size; ++ } else { ++ fsg->phase_error = 1; ++ return -EINVAL; ++ } ++ } ++ ++ /* Check that the LUN values are consistent */ ++ if (transport_is_bbb()) { ++ if (fsg->lun != lun) ++ DBG(fsg, "using LUN %d from CBW, " ++ "not LUN %d from CDB\n", ++ fsg->lun, lun); ++ } ++ ++ /* Check the LUN */ ++ curlun = fsg->curlun; ++ if (curlun) { ++ if (fsg->cmnd[0] != REQUEST_SENSE) { ++ curlun->sense_data = SS_NO_SENSE; ++ curlun->sense_data_info = 0; ++ curlun->info_valid = 0; ++ } ++ } else { ++ fsg->bad_lun_okay = 0; ++ ++ /* INQUIRY and REQUEST SENSE commands are explicitly allowed ++ * to use unsupported LUNs; all others may not. */ ++ if (fsg->cmnd[0] != INQUIRY && ++ fsg->cmnd[0] != REQUEST_SENSE) { ++ DBG(fsg, "unsupported LUN %d\n", fsg->lun); ++ return -EINVAL; ++ } ++ } ++ ++ /* If a unit attention condition exists, only INQUIRY and ++ * REQUEST SENSE commands are allowed; anything else must fail. */ ++ if (curlun && curlun->unit_attention_data != SS_NO_SENSE && ++ fsg->cmnd[0] != INQUIRY && ++ fsg->cmnd[0] != REQUEST_SENSE) { ++ curlun->sense_data = curlun->unit_attention_data; ++ curlun->unit_attention_data = SS_NO_SENSE; ++ return -EINVAL; ++ } ++ ++ /* Check that only command bytes listed in the mask are non-zero */ ++ fsg->cmnd[1] &= 0x1f; // Mask away the LUN ++ for (i = 1; i < cmnd_size; ++i) { ++ if (fsg->cmnd[i] && !(mask & (1 << i))) { ++ if (curlun) ++ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; ++ return -EINVAL; ++ } ++ } ++ ++ /* If the medium isn't mounted and the command needs to access ++ * it, return an error. */ ++ if (curlun && !fsg_lun_is_open(curlun) && needs_medium) { ++ curlun->sense_data = SS_MEDIUM_NOT_PRESENT; ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/* wrapper of check_command for data size in blocks handling */ ++static int check_command_size_in_blocks(struct fsg_dev *fsg, int cmnd_size, ++ enum data_direction data_dir, unsigned int mask, ++ int needs_medium, const char *name) ++{ ++ if (fsg->curlun) ++ fsg->data_size_from_cmnd <<= fsg->curlun->blkbits; ++ return check_command(fsg, cmnd_size, data_dir, ++ mask, needs_medium, name); ++} ++ ++static int do_scsi_command(struct fsg_dev *fsg) ++{ ++ struct fsg_buffhd *bh; ++ int rc; ++ int reply = -EINVAL; ++ int i; ++ static char unknown[16]; ++ ++ dump_cdb(fsg); ++ ++ /* Wait for the next buffer to become available for data or status */ ++ bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill; ++ while (bh->state != BUF_STATE_EMPTY) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ fsg->phase_error = 0; ++ fsg->short_packet_received = 0; ++ ++ down_read(&fsg->filesem); // We're using the backing file ++ switch (fsg->cmnd[0]) { ++ ++ case INQUIRY: ++ fsg->data_size_from_cmnd = fsg->cmnd[4]; ++ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, ++ (1<<4), 0, ++ "INQUIRY")) == 0) ++ reply = do_inquiry(fsg, bh); ++ break; ++ ++ case MODE_SELECT: ++ fsg->data_size_from_cmnd = fsg->cmnd[4]; ++ if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST, ++ (1<<1) | (1<<4), 0, ++ "MODE SELECT(6)")) == 0) ++ reply = do_mode_select(fsg, bh); ++ break; ++ ++ case MODE_SELECT_10: ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST, ++ (1<<1) | (3<<7), 0, ++ "MODE SELECT(10)")) == 0) ++ reply = do_mode_select(fsg, bh); ++ break; ++ ++ case MODE_SENSE: ++ fsg->data_size_from_cmnd = fsg->cmnd[4]; ++ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, ++ (1<<1) | (1<<2) | (1<<4), 0, ++ "MODE SENSE(6)")) == 0) ++ reply = do_mode_sense(fsg, bh); ++ break; ++ ++ case MODE_SENSE_10: ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, ++ (1<<1) | (1<<2) | (3<<7), 0, ++ "MODE SENSE(10)")) == 0) ++ reply = do_mode_sense(fsg, bh); ++ break; ++ ++ case ALLOW_MEDIUM_REMOVAL: ++ fsg->data_size_from_cmnd = 0; ++ if ((reply = check_command(fsg, 6, DATA_DIR_NONE, ++ (1<<4), 0, ++ "PREVENT-ALLOW MEDIUM REMOVAL")) == 0) ++ reply = do_prevent_allow(fsg); ++ break; ++ ++ case READ_6: ++ i = fsg->cmnd[4]; ++ fsg->data_size_from_cmnd = (i == 0) ? 256 : i; ++ if ((reply = check_command_size_in_blocks(fsg, 6, ++ DATA_DIR_TO_HOST, ++ (7<<1) | (1<<4), 1, ++ "READ(6)")) == 0) ++ reply = do_read(fsg); ++ break; ++ ++ case READ_10: ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command_size_in_blocks(fsg, 10, ++ DATA_DIR_TO_HOST, ++ (1<<1) | (0xf<<2) | (3<<7), 1, ++ "READ(10)")) == 0) ++ reply = do_read(fsg); ++ break; ++ ++ case READ_12: ++ fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]); ++ if ((reply = check_command_size_in_blocks(fsg, 12, ++ DATA_DIR_TO_HOST, ++ (1<<1) | (0xf<<2) | (0xf<<6), 1, ++ "READ(12)")) == 0) ++ reply = do_read(fsg); ++ break; ++ ++ case READ_CAPACITY: ++ fsg->data_size_from_cmnd = 8; ++ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, ++ (0xf<<2) | (1<<8), 1, ++ "READ CAPACITY")) == 0) ++ reply = do_read_capacity(fsg, bh); ++ break; ++ ++ case READ_HEADER: ++ if (!mod_data.cdrom) ++ goto unknown_cmnd; ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, ++ (3<<7) | (0x1f<<1), 1, ++ "READ HEADER")) == 0) ++ reply = do_read_header(fsg, bh); ++ break; ++ ++ case READ_TOC: ++ if (!mod_data.cdrom) ++ goto unknown_cmnd; ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, ++ (7<<6) | (1<<1), 1, ++ "READ TOC")) == 0) ++ reply = do_read_toc(fsg, bh); ++ break; ++ ++ case READ_FORMAT_CAPACITIES: ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, ++ (3<<7), 1, ++ "READ FORMAT CAPACITIES")) == 0) ++ reply = do_read_format_capacities(fsg, bh); ++ break; ++ ++ case REQUEST_SENSE: ++ fsg->data_size_from_cmnd = fsg->cmnd[4]; ++ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, ++ (1<<4), 0, ++ "REQUEST SENSE")) == 0) ++ reply = do_request_sense(fsg, bh); ++ break; ++ ++ case START_STOP: ++ fsg->data_size_from_cmnd = 0; ++ if ((reply = check_command(fsg, 6, DATA_DIR_NONE, ++ (1<<1) | (1<<4), 0, ++ "START-STOP UNIT")) == 0) ++ reply = do_start_stop(fsg); ++ break; ++ ++ case SYNCHRONIZE_CACHE: ++ fsg->data_size_from_cmnd = 0; ++ if ((reply = check_command(fsg, 10, DATA_DIR_NONE, ++ (0xf<<2) | (3<<7), 1, ++ "SYNCHRONIZE CACHE")) == 0) ++ reply = do_synchronize_cache(fsg); ++ break; ++ ++ case TEST_UNIT_READY: ++ fsg->data_size_from_cmnd = 0; ++ reply = check_command(fsg, 6, DATA_DIR_NONE, ++ 0, 1, ++ "TEST UNIT READY"); ++ break; ++ ++ /* Although optional, this command is used by MS-Windows. We ++ * support a minimal version: BytChk must be 0. */ ++ case VERIFY: ++ fsg->data_size_from_cmnd = 0; ++ if ((reply = check_command(fsg, 10, DATA_DIR_NONE, ++ (1<<1) | (0xf<<2) | (3<<7), 1, ++ "VERIFY")) == 0) ++ reply = do_verify(fsg); ++ break; ++ ++ case WRITE_6: ++ i = fsg->cmnd[4]; ++ fsg->data_size_from_cmnd = (i == 0) ? 256 : i; ++ if ((reply = check_command_size_in_blocks(fsg, 6, ++ DATA_DIR_FROM_HOST, ++ (7<<1) | (1<<4), 1, ++ "WRITE(6)")) == 0) ++ reply = do_write(fsg); ++ break; ++ ++ case WRITE_10: ++ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); ++ if ((reply = check_command_size_in_blocks(fsg, 10, ++ DATA_DIR_FROM_HOST, ++ (1<<1) | (0xf<<2) | (3<<7), 1, ++ "WRITE(10)")) == 0) ++ reply = do_write(fsg); ++ break; ++ ++ case WRITE_12: ++ fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]); ++ if ((reply = check_command_size_in_blocks(fsg, 12, ++ DATA_DIR_FROM_HOST, ++ (1<<1) | (0xf<<2) | (0xf<<6), 1, ++ "WRITE(12)")) == 0) ++ reply = do_write(fsg); ++ break; ++ ++ /* Some mandatory commands that we recognize but don't implement. ++ * They don't mean much in this setting. It's left as an exercise ++ * for anyone interested to implement RESERVE and RELEASE in terms ++ * of Posix locks. */ ++ case FORMAT_UNIT: ++ case RELEASE: ++ case RESERVE: ++ case SEND_DIAGNOSTIC: ++ // Fall through ++ ++ default: ++ unknown_cmnd: ++ fsg->data_size_from_cmnd = 0; ++ sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]); ++ if ((reply = check_command(fsg, fsg->cmnd_size, ++ DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) { ++ fsg->curlun->sense_data = SS_INVALID_COMMAND; ++ reply = -EINVAL; ++ } ++ break; ++ } ++ up_read(&fsg->filesem); ++ ++ if (reply == -EINTR || signal_pending(current)) ++ return -EINTR; ++ ++ /* Set up the single reply buffer for finish_reply() */ ++ if (reply == -EINVAL) ++ reply = 0; // Error reply length ++ if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) { ++ reply = min((u32) reply, fsg->data_size_from_cmnd); ++ bh->inreq->length = reply; ++ bh->state = BUF_STATE_FULL; ++ fsg->residue -= reply; ++ } // Otherwise it's already set ++ ++ return 0; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) ++{ ++ struct usb_request *req = bh->outreq; ++ struct bulk_cb_wrap *cbw = req->buf; ++ ++ /* Was this a real packet? Should it be ignored? */ ++ if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) ++ return -EINVAL; ++ ++ /* Is the CBW valid? */ ++ if (req->actual != US_BULK_CB_WRAP_LEN || ++ cbw->Signature != cpu_to_le32( ++ US_BULK_CB_SIGN)) { ++ DBG(fsg, "invalid CBW: len %u sig 0x%x\n", ++ req->actual, ++ le32_to_cpu(cbw->Signature)); ++ ++ /* The Bulk-only spec says we MUST stall the IN endpoint ++ * (6.6.1), so it's unavoidable. It also says we must ++ * retain this state until the next reset, but there's ++ * no way to tell the controller driver it should ignore ++ * Clear-Feature(HALT) requests. ++ * ++ * We aren't required to halt the OUT endpoint; instead ++ * we can simply accept and discard any data received ++ * until the next reset. */ ++ wedge_bulk_in_endpoint(fsg); ++ set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); ++ return -EINVAL; ++ } ++ ++ /* Is the CBW meaningful? */ ++ if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN || ++ cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) { ++ DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " ++ "cmdlen %u\n", ++ cbw->Lun, cbw->Flags, cbw->Length); ++ ++ /* We can do anything we want here, so let's stall the ++ * bulk pipes if we are allowed to. */ ++ if (mod_data.can_stall) { ++ fsg_set_halt(fsg, fsg->bulk_out); ++ halt_bulk_in_endpoint(fsg); ++ } ++ return -EINVAL; ++ } ++ ++ /* Save the command for later */ ++ fsg->cmnd_size = cbw->Length; ++ memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size); ++ if (cbw->Flags & US_BULK_FLAG_IN) ++ fsg->data_dir = DATA_DIR_TO_HOST; ++ else ++ fsg->data_dir = DATA_DIR_FROM_HOST; ++ fsg->data_size = le32_to_cpu(cbw->DataTransferLength); ++ if (fsg->data_size == 0) ++ fsg->data_dir = DATA_DIR_NONE; ++ fsg->lun = cbw->Lun; ++ fsg->tag = cbw->Tag; ++ return 0; ++} ++ ++ ++static int get_next_command(struct fsg_dev *fsg) ++{ ++ struct fsg_buffhd *bh; ++ int rc = 0; ++ ++ if (transport_is_bbb()) { ++ ++ /* Wait for the next buffer to become available */ ++ bh = fsg->next_buffhd_to_fill; ++ while (bh->state != BUF_STATE_EMPTY) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ ++ /* Queue a request to read a Bulk-only CBW */ ++ set_bulk_out_req_length(fsg, bh, US_BULK_CB_WRAP_LEN); ++ start_transfer(fsg, fsg->bulk_out, bh->outreq, ++ &bh->outreq_busy, &bh->state); ++ ++ /* We will drain the buffer in software, which means we ++ * can reuse it for the next filling. No need to advance ++ * next_buffhd_to_fill. */ ++ ++ /* Wait for the CBW to arrive */ ++ while (bh->state != BUF_STATE_FULL) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ smp_rmb(); ++ rc = received_cbw(fsg, bh); ++ bh->state = BUF_STATE_EMPTY; ++ ++ } else { // USB_PR_CB or USB_PR_CBI ++ ++ /* Wait for the next command to arrive */ ++ while (fsg->cbbuf_cmnd_size == 0) { ++ rc = sleep_thread(fsg); ++ if (rc) ++ return rc; ++ } ++ ++ /* Is the previous status interrupt request still busy? ++ * The host is allowed to skip reading the status, ++ * so we must cancel it. */ ++ if (fsg->intreq_busy) ++ usb_ep_dequeue(fsg->intr_in, fsg->intreq); ++ ++ /* Copy the command and mark the buffer empty */ ++ fsg->data_dir = DATA_DIR_UNKNOWN; ++ spin_lock_irq(&fsg->lock); ++ fsg->cmnd_size = fsg->cbbuf_cmnd_size; ++ memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size); ++ fsg->cbbuf_cmnd_size = 0; ++ spin_unlock_irq(&fsg->lock); ++ ++ /* Use LUN from the command */ ++ fsg->lun = fsg->cmnd[1] >> 5; ++ } ++ ++ /* Update current lun */ ++ if (fsg->lun >= 0 && fsg->lun < fsg->nluns) ++ fsg->curlun = &fsg->luns[fsg->lun]; ++ else ++ fsg->curlun = NULL; ++ ++ return rc; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep, ++ const struct usb_endpoint_descriptor *d) ++{ ++ int rc; ++ ++ ep->driver_data = fsg; ++ ep->desc = d; ++ rc = usb_ep_enable(ep); ++ if (rc) ++ ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc); ++ return rc; ++} ++ ++static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep, ++ struct usb_request **preq) ++{ ++ *preq = usb_ep_alloc_request(ep, GFP_ATOMIC); ++ if (*preq) ++ return 0; ++ ERROR(fsg, "can't allocate request for %s\n", ep->name); ++ return -ENOMEM; ++} ++ ++/* ++ * Reset interface setting and re-init endpoint state (toggle etc). ++ * Call with altsetting < 0 to disable the interface. The only other ++ * available altsetting is 0, which enables the interface. ++ */ ++static int do_set_interface(struct fsg_dev *fsg, int altsetting) ++{ ++ int rc = 0; ++ int i; ++ const struct usb_endpoint_descriptor *d; ++ ++ if (fsg->running) ++ DBG(fsg, "reset interface\n"); ++ ++reset: ++ /* Deallocate the requests */ ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ struct fsg_buffhd *bh = &fsg->buffhds[i]; ++ ++ if (bh->inreq) { ++ usb_ep_free_request(fsg->bulk_in, bh->inreq); ++ bh->inreq = NULL; ++ } ++ if (bh->outreq) { ++ usb_ep_free_request(fsg->bulk_out, bh->outreq); ++ bh->outreq = NULL; ++ } ++ } ++ if (fsg->intreq) { ++ usb_ep_free_request(fsg->intr_in, fsg->intreq); ++ fsg->intreq = NULL; ++ } ++ ++ /* Disable the endpoints */ ++ if (fsg->bulk_in_enabled) { ++ usb_ep_disable(fsg->bulk_in); ++ fsg->bulk_in_enabled = 0; ++ } ++ if (fsg->bulk_out_enabled) { ++ usb_ep_disable(fsg->bulk_out); ++ fsg->bulk_out_enabled = 0; ++ } ++ if (fsg->intr_in_enabled) { ++ usb_ep_disable(fsg->intr_in); ++ fsg->intr_in_enabled = 0; ++ } ++ ++ fsg->running = 0; ++ if (altsetting < 0 || rc != 0) ++ return rc; ++ ++ DBG(fsg, "set interface %d\n", altsetting); ++ ++ /* Enable the endpoints */ ++ d = fsg_ep_desc(fsg->gadget, ++ &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc, ++ &fsg_ss_bulk_in_desc); ++ if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0) ++ goto reset; ++ fsg->bulk_in_enabled = 1; ++ ++ d = fsg_ep_desc(fsg->gadget, ++ &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc, ++ &fsg_ss_bulk_out_desc); ++ if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0) ++ goto reset; ++ fsg->bulk_out_enabled = 1; ++ fsg->bulk_out_maxpacket = usb_endpoint_maxp(d); ++ clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); ++ ++ if (transport_is_cbi()) { ++ d = fsg_ep_desc(fsg->gadget, ++ &fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc, ++ &fsg_ss_intr_in_desc); ++ if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0) ++ goto reset; ++ fsg->intr_in_enabled = 1; ++ } ++ ++ /* Allocate the requests */ ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ struct fsg_buffhd *bh = &fsg->buffhds[i]; ++ ++ if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0) ++ goto reset; ++ if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0) ++ goto reset; ++ bh->inreq->buf = bh->outreq->buf = bh->buf; ++ bh->inreq->context = bh->outreq->context = bh; ++ bh->inreq->complete = bulk_in_complete; ++ bh->outreq->complete = bulk_out_complete; ++ } ++ if (transport_is_cbi()) { ++ if ((rc = alloc_request(fsg, fsg->intr_in, &fsg->intreq)) != 0) ++ goto reset; ++ fsg->intreq->complete = intr_in_complete; ++ } ++ ++ fsg->running = 1; ++ for (i = 0; i < fsg->nluns; ++i) ++ fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED; ++ return rc; ++} ++ ++ ++/* ++ * Change our operational configuration. This code must agree with the code ++ * that returns config descriptors, and with interface altsetting code. ++ * ++ * It's also responsible for power management interactions. Some ++ * configurations might not work with our current power sources. ++ * For now we just assume the gadget is always self-powered. ++ */ ++static int do_set_config(struct fsg_dev *fsg, u8 new_config) ++{ ++ int rc = 0; ++ ++ /* Disable the single interface */ ++ if (fsg->config != 0) { ++ DBG(fsg, "reset config\n"); ++ fsg->config = 0; ++ rc = do_set_interface(fsg, -1); ++ } ++ ++ /* Enable the interface */ ++ if (new_config != 0) { ++ fsg->config = new_config; ++ if ((rc = do_set_interface(fsg, 0)) != 0) ++ fsg->config = 0; // Reset on errors ++ else ++ INFO(fsg, "%s config #%d\n", ++ usb_speed_string(fsg->gadget->speed), ++ fsg->config); ++ } ++ return rc; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void handle_exception(struct fsg_dev *fsg) ++{ ++ siginfo_t info; ++ int sig; ++ int i; ++ int num_active; ++ struct fsg_buffhd *bh; ++ enum fsg_state old_state; ++ u8 new_config; ++ struct fsg_lun *curlun; ++ unsigned int exception_req_tag; ++ int rc; ++ ++ /* Clear the existing signals. Anything but SIGUSR1 is converted ++ * into a high-priority EXIT exception. */ ++ for (;;) { ++ sig = dequeue_signal_lock(current, ¤t->blocked, &info); ++ if (!sig) ++ break; ++ if (sig != SIGUSR1) { ++ if (fsg->state < FSG_STATE_EXIT) ++ DBG(fsg, "Main thread exiting on signal\n"); ++ raise_exception(fsg, FSG_STATE_EXIT); ++ } ++ } ++ ++ /* Cancel all the pending transfers */ ++ if (fsg->intreq_busy) ++ usb_ep_dequeue(fsg->intr_in, fsg->intreq); ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ bh = &fsg->buffhds[i]; ++ if (bh->inreq_busy) ++ usb_ep_dequeue(fsg->bulk_in, bh->inreq); ++ if (bh->outreq_busy) ++ usb_ep_dequeue(fsg->bulk_out, bh->outreq); ++ } ++ ++ /* Wait until everything is idle */ ++ for (;;) { ++ num_active = fsg->intreq_busy; ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ bh = &fsg->buffhds[i]; ++ num_active += bh->inreq_busy + bh->outreq_busy; ++ } ++ if (num_active == 0) ++ break; ++ if (sleep_thread(fsg)) ++ return; ++ } ++ ++ /* Clear out the controller's fifos */ ++ if (fsg->bulk_in_enabled) ++ usb_ep_fifo_flush(fsg->bulk_in); ++ if (fsg->bulk_out_enabled) ++ usb_ep_fifo_flush(fsg->bulk_out); ++ if (fsg->intr_in_enabled) ++ usb_ep_fifo_flush(fsg->intr_in); ++ ++ /* Reset the I/O buffer states and pointers, the SCSI ++ * state, and the exception. Then invoke the handler. */ ++ spin_lock_irq(&fsg->lock); ++ ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ bh = &fsg->buffhds[i]; ++ bh->state = BUF_STATE_EMPTY; ++ } ++ fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain = ++ &fsg->buffhds[0]; ++ ++ exception_req_tag = fsg->exception_req_tag; ++ new_config = fsg->new_config; ++ old_state = fsg->state; ++ ++ if (old_state == FSG_STATE_ABORT_BULK_OUT) ++ fsg->state = FSG_STATE_STATUS_PHASE; ++ else { ++ for (i = 0; i < fsg->nluns; ++i) { ++ curlun = &fsg->luns[i]; ++ curlun->prevent_medium_removal = 0; ++ curlun->sense_data = curlun->unit_attention_data = ++ SS_NO_SENSE; ++ curlun->sense_data_info = 0; ++ curlun->info_valid = 0; ++ } ++ fsg->state = FSG_STATE_IDLE; ++ } ++ spin_unlock_irq(&fsg->lock); ++ ++ /* Carry out any extra actions required for the exception */ ++ switch (old_state) { ++ default: ++ break; ++ ++ case FSG_STATE_ABORT_BULK_OUT: ++ send_status(fsg); ++ spin_lock_irq(&fsg->lock); ++ if (fsg->state == FSG_STATE_STATUS_PHASE) ++ fsg->state = FSG_STATE_IDLE; ++ spin_unlock_irq(&fsg->lock); ++ break; ++ ++ case FSG_STATE_RESET: ++ /* In case we were forced against our will to halt a ++ * bulk endpoint, clear the halt now. (The SuperH UDC ++ * requires this.) */ ++ if (test_and_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) ++ usb_ep_clear_halt(fsg->bulk_in); ++ ++ if (transport_is_bbb()) { ++ if (fsg->ep0_req_tag == exception_req_tag) ++ ep0_queue(fsg); // Complete the status stage ++ ++ } else if (transport_is_cbi()) ++ send_status(fsg); // Status by interrupt pipe ++ ++ /* Technically this should go here, but it would only be ++ * a waste of time. Ditto for the INTERFACE_CHANGE and ++ * CONFIG_CHANGE cases. */ ++ // for (i = 0; i < fsg->nluns; ++i) ++ // fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED; ++ break; ++ ++ case FSG_STATE_INTERFACE_CHANGE: ++ rc = do_set_interface(fsg, 0); ++ if (fsg->ep0_req_tag != exception_req_tag) ++ break; ++ if (rc != 0) // STALL on errors ++ fsg_set_halt(fsg, fsg->ep0); ++ else // Complete the status stage ++ ep0_queue(fsg); ++ break; ++ ++ case FSG_STATE_CONFIG_CHANGE: ++ rc = do_set_config(fsg, new_config); ++ if (fsg->ep0_req_tag != exception_req_tag) ++ break; ++ if (rc != 0) // STALL on errors ++ fsg_set_halt(fsg, fsg->ep0); ++ else // Complete the status stage ++ ep0_queue(fsg); ++ break; ++ ++ case FSG_STATE_DISCONNECT: ++ for (i = 0; i < fsg->nluns; ++i) ++ fsg_lun_fsync_sub(fsg->luns + i); ++ do_set_config(fsg, 0); // Unconfigured state ++ break; ++ ++ case FSG_STATE_EXIT: ++ case FSG_STATE_TERMINATED: ++ do_set_config(fsg, 0); // Free resources ++ spin_lock_irq(&fsg->lock); ++ fsg->state = FSG_STATE_TERMINATED; // Stop the thread ++ spin_unlock_irq(&fsg->lock); ++ break; ++ } ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int fsg_main_thread(void *fsg_) ++{ ++ struct fsg_dev *fsg = fsg_; ++ ++ /* Allow the thread to be killed by a signal, but set the signal mask ++ * to block everything but INT, TERM, KILL, and USR1. */ ++ allow_signal(SIGINT); ++ allow_signal(SIGTERM); ++ allow_signal(SIGKILL); ++ allow_signal(SIGUSR1); ++ ++ /* Allow the thread to be frozen */ ++ set_freezable(); ++ ++ /* Arrange for userspace references to be interpreted as kernel ++ * pointers. That way we can pass a kernel pointer to a routine ++ * that expects a __user pointer and it will work okay. */ ++ set_fs(get_ds()); ++ ++ /* The main loop */ ++ while (fsg->state != FSG_STATE_TERMINATED) { ++ if (exception_in_progress(fsg) || signal_pending(current)) { ++ handle_exception(fsg); ++ continue; ++ } ++ ++ if (!fsg->running) { ++ sleep_thread(fsg); ++ continue; ++ } ++ ++ if (get_next_command(fsg)) ++ continue; ++ ++ spin_lock_irq(&fsg->lock); ++ if (!exception_in_progress(fsg)) ++ fsg->state = FSG_STATE_DATA_PHASE; ++ spin_unlock_irq(&fsg->lock); ++ ++ if (do_scsi_command(fsg) || finish_reply(fsg)) ++ continue; ++ ++ spin_lock_irq(&fsg->lock); ++ if (!exception_in_progress(fsg)) ++ fsg->state = FSG_STATE_STATUS_PHASE; ++ spin_unlock_irq(&fsg->lock); ++ ++ if (send_status(fsg)) ++ continue; ++ ++ spin_lock_irq(&fsg->lock); ++ if (!exception_in_progress(fsg)) ++ fsg->state = FSG_STATE_IDLE; ++ spin_unlock_irq(&fsg->lock); ++ } ++ ++ spin_lock_irq(&fsg->lock); ++ fsg->thread_task = NULL; ++ spin_unlock_irq(&fsg->lock); ++ ++ /* If we are exiting because of a signal, unregister the ++ * gadget driver. */ ++ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) ++ usb_gadget_unregister_driver(&fsg_driver); ++ ++ /* Let the unbind and cleanup routines know the thread has exited */ ++ complete_and_exit(&fsg->thread_notifier, 0); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++ ++/* The write permissions and store_xxx pointers are set in fsg_bind() */ ++static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL); ++static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL); ++static DEVICE_ATTR(file, 0444, fsg_show_file, NULL); ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void fsg_release(struct kref *ref) ++{ ++ struct fsg_dev *fsg = container_of(ref, struct fsg_dev, ref); ++ ++ kfree(fsg->luns); ++ kfree(fsg); ++} ++ ++static void lun_release(struct device *dev) ++{ ++ struct rw_semaphore *filesem = dev_get_drvdata(dev); ++ struct fsg_dev *fsg = ++ container_of(filesem, struct fsg_dev, filesem); ++ ++ kref_put(&fsg->ref, fsg_release); ++} ++ ++static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) ++{ ++ struct fsg_dev *fsg = get_gadget_data(gadget); ++ int i; ++ struct fsg_lun *curlun; ++ struct usb_request *req = fsg->ep0req; ++ ++ DBG(fsg, "unbind\n"); ++ clear_bit(REGISTERED, &fsg->atomic_bitflags); ++ ++ /* If the thread isn't already dead, tell it to exit now */ ++ if (fsg->state != FSG_STATE_TERMINATED) { ++ raise_exception(fsg, FSG_STATE_EXIT); ++ wait_for_completion(&fsg->thread_notifier); ++ ++ /* The cleanup routine waits for this completion also */ ++ complete(&fsg->thread_notifier); ++ } ++ ++ /* Unregister the sysfs attribute files and the LUNs */ ++ for (i = 0; i < fsg->nluns; ++i) { ++ curlun = &fsg->luns[i]; ++ if (curlun->registered) { ++ device_remove_file(&curlun->dev, &dev_attr_nofua); ++ device_remove_file(&curlun->dev, &dev_attr_ro); ++ device_remove_file(&curlun->dev, &dev_attr_file); ++ fsg_lun_close(curlun); ++ device_unregister(&curlun->dev); ++ curlun->registered = 0; ++ } ++ } ++ ++ /* Free the data buffers */ ++ for (i = 0; i < fsg_num_buffers; ++i) ++ kfree(fsg->buffhds[i].buf); ++ ++ /* Free the request and buffer for endpoint 0 */ ++ if (req) { ++ kfree(req->buf); ++ usb_ep_free_request(fsg->ep0, req); ++ } ++ ++ set_gadget_data(gadget, NULL); ++} ++ ++ ++static int __init check_parameters(struct fsg_dev *fsg) ++{ ++ int prot; ++ int gcnum; ++ ++ /* Store the default values */ ++ mod_data.transport_type = USB_PR_BULK; ++ mod_data.transport_name = "Bulk-only"; ++ mod_data.protocol_type = USB_SC_SCSI; ++ mod_data.protocol_name = "Transparent SCSI"; ++ ++ /* Some peripheral controllers are known not to be able to ++ * halt bulk endpoints correctly. If one of them is present, ++ * disable stalls. ++ */ ++ if (gadget_is_at91(fsg->gadget)) ++ mod_data.can_stall = 0; ++ ++ if (mod_data.release == 0xffff) { // Parameter wasn't set ++ gcnum = usb_gadget_controller_number(fsg->gadget); ++ if (gcnum >= 0) ++ mod_data.release = 0x0300 + gcnum; ++ else { ++ WARNING(fsg, "controller '%s' not recognized\n", ++ fsg->gadget->name); ++ mod_data.release = 0x0399; ++ } ++ } ++ ++ prot = simple_strtol(mod_data.protocol_parm, NULL, 0); ++ ++#ifdef CONFIG_USB_FILE_STORAGE_TEST ++ if (strnicmp(mod_data.transport_parm, "BBB", 10) == 0) { ++ ; // Use default setting ++ } else if (strnicmp(mod_data.transport_parm, "CB", 10) == 0) { ++ mod_data.transport_type = USB_PR_CB; ++ mod_data.transport_name = "Control-Bulk"; ++ } else if (strnicmp(mod_data.transport_parm, "CBI", 10) == 0) { ++ mod_data.transport_type = USB_PR_CBI; ++ mod_data.transport_name = "Control-Bulk-Interrupt"; ++ } else { ++ ERROR(fsg, "invalid transport: %s\n", mod_data.transport_parm); ++ return -EINVAL; ++ } ++ ++ if (strnicmp(mod_data.protocol_parm, "SCSI", 10) == 0 || ++ prot == USB_SC_SCSI) { ++ ; // Use default setting ++ } else if (strnicmp(mod_data.protocol_parm, "RBC", 10) == 0 || ++ prot == USB_SC_RBC) { ++ mod_data.protocol_type = USB_SC_RBC; ++ mod_data.protocol_name = "RBC"; ++ } else if (strnicmp(mod_data.protocol_parm, "8020", 4) == 0 || ++ strnicmp(mod_data.protocol_parm, "ATAPI", 10) == 0 || ++ prot == USB_SC_8020) { ++ mod_data.protocol_type = USB_SC_8020; ++ mod_data.protocol_name = "8020i (ATAPI)"; ++ } else if (strnicmp(mod_data.protocol_parm, "QIC", 3) == 0 || ++ prot == USB_SC_QIC) { ++ mod_data.protocol_type = USB_SC_QIC; ++ mod_data.protocol_name = "QIC-157"; ++ } else if (strnicmp(mod_data.protocol_parm, "UFI", 10) == 0 || ++ prot == USB_SC_UFI) { ++ mod_data.protocol_type = USB_SC_UFI; ++ mod_data.protocol_name = "UFI"; ++ } else if (strnicmp(mod_data.protocol_parm, "8070", 4) == 0 || ++ prot == USB_SC_8070) { ++ mod_data.protocol_type = USB_SC_8070; ++ mod_data.protocol_name = "8070i"; ++ } else { ++ ERROR(fsg, "invalid protocol: %s\n", mod_data.protocol_parm); ++ return -EINVAL; ++ } ++ ++ mod_data.buflen &= PAGE_CACHE_MASK; ++ if (mod_data.buflen <= 0) { ++ ERROR(fsg, "invalid buflen\n"); ++ return -ETOOSMALL; ++ } ++ ++#endif /* CONFIG_USB_FILE_STORAGE_TEST */ ++ ++ /* Serial string handling. ++ * On a real device, the serial string would be loaded ++ * from permanent storage. */ ++ if (mod_data.serial) { ++ const char *ch; ++ unsigned len = 0; ++ ++ /* Sanity check : ++ * The CB[I] specification limits the serial string to ++ * 12 uppercase hexadecimal characters. ++ * BBB need at least 12 uppercase hexadecimal characters, ++ * with a maximum of 126. */ ++ for (ch = mod_data.serial; *ch; ++ch) { ++ ++len; ++ if ((*ch < '0' || *ch > '9') && ++ (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */ ++ WARNING(fsg, ++ "Invalid serial string character: %c\n", ++ *ch); ++ goto no_serial; ++ } ++ } ++ if (len > 126 || ++ (mod_data.transport_type == USB_PR_BULK && len < 12) || ++ (mod_data.transport_type != USB_PR_BULK && len > 12)) { ++ WARNING(fsg, "Invalid serial string length!\n"); ++ goto no_serial; ++ } ++ fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial; ++ } else { ++ WARNING(fsg, "No serial-number string provided!\n"); ++ no_serial: ++ device_desc.iSerialNumber = 0; ++ } ++ ++ return 0; ++} ++ ++ ++static int __init fsg_bind(struct usb_gadget *gadget) ++{ ++ struct fsg_dev *fsg = the_fsg; ++ int rc; ++ int i; ++ struct fsg_lun *curlun; ++ struct usb_ep *ep; ++ struct usb_request *req; ++ char *pathbuf, *p; ++ ++ fsg->gadget = gadget; ++ set_gadget_data(gadget, fsg); ++ fsg->ep0 = gadget->ep0; ++ fsg->ep0->driver_data = fsg; ++ ++ if ((rc = check_parameters(fsg)) != 0) ++ goto out; ++ ++ if (mod_data.removable) { // Enable the store_xxx attributes ++ dev_attr_file.attr.mode = 0644; ++ dev_attr_file.store = fsg_store_file; ++ if (!mod_data.cdrom) { ++ dev_attr_ro.attr.mode = 0644; ++ dev_attr_ro.store = fsg_store_ro; ++ } ++ } ++ ++ /* Only for removable media? */ ++ dev_attr_nofua.attr.mode = 0644; ++ dev_attr_nofua.store = fsg_store_nofua; ++ ++ /* Find out how many LUNs there should be */ ++ i = mod_data.nluns; ++ if (i == 0) ++ i = max(mod_data.num_filenames, 1u); ++ if (i > FSG_MAX_LUNS) { ++ ERROR(fsg, "invalid number of LUNs: %d\n", i); ++ rc = -EINVAL; ++ goto out; ++ } ++ ++ /* Create the LUNs, open their backing files, and register the ++ * LUN devices in sysfs. */ ++ fsg->luns = kzalloc(i * sizeof(struct fsg_lun), GFP_KERNEL); ++ if (!fsg->luns) { ++ rc = -ENOMEM; ++ goto out; ++ } ++ fsg->nluns = i; ++ ++ for (i = 0; i < fsg->nluns; ++i) { ++ curlun = &fsg->luns[i]; ++ curlun->cdrom = !!mod_data.cdrom; ++ curlun->ro = mod_data.cdrom || mod_data.ro[i]; ++ curlun->initially_ro = curlun->ro; ++ curlun->removable = mod_data.removable; ++ curlun->nofua = mod_data.nofua[i]; ++ curlun->dev.release = lun_release; ++ curlun->dev.parent = &gadget->dev; ++ curlun->dev.driver = &fsg_driver.driver; ++ dev_set_drvdata(&curlun->dev, &fsg->filesem); ++ dev_set_name(&curlun->dev,"%s-lun%d", ++ dev_name(&gadget->dev), i); ++ ++ kref_get(&fsg->ref); ++ rc = device_register(&curlun->dev); ++ if (rc) { ++ INFO(fsg, "failed to register LUN%d: %d\n", i, rc); ++ put_device(&curlun->dev); ++ goto out; ++ } ++ curlun->registered = 1; ++ ++ rc = device_create_file(&curlun->dev, &dev_attr_ro); ++ if (rc) ++ goto out; ++ rc = device_create_file(&curlun->dev, &dev_attr_nofua); ++ if (rc) ++ goto out; ++ rc = device_create_file(&curlun->dev, &dev_attr_file); ++ if (rc) ++ goto out; ++ ++ if (mod_data.file[i] && *mod_data.file[i]) { ++ rc = fsg_lun_open(curlun, mod_data.file[i]); ++ if (rc) ++ goto out; ++ } else if (!mod_data.removable) { ++ ERROR(fsg, "no file given for LUN%d\n", i); ++ rc = -EINVAL; ++ goto out; ++ } ++ } ++ ++ /* Find all the endpoints we will use */ ++ usb_ep_autoconfig_reset(gadget); ++ ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc); ++ if (!ep) ++ goto autoconf_fail; ++ ep->driver_data = fsg; // claim the endpoint ++ fsg->bulk_in = ep; ++ ++ ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc); ++ if (!ep) ++ goto autoconf_fail; ++ ep->driver_data = fsg; // claim the endpoint ++ fsg->bulk_out = ep; ++ ++ if (transport_is_cbi()) { ++ ep = usb_ep_autoconfig(gadget, &fsg_fs_intr_in_desc); ++ if (!ep) ++ goto autoconf_fail; ++ ep->driver_data = fsg; // claim the endpoint ++ fsg->intr_in = ep; ++ } ++ ++ /* Fix up the descriptors */ ++ device_desc.idVendor = cpu_to_le16(mod_data.vendor); ++ device_desc.idProduct = cpu_to_le16(mod_data.product); ++ device_desc.bcdDevice = cpu_to_le16(mod_data.release); ++ ++ i = (transport_is_cbi() ? 3 : 2); // Number of endpoints ++ fsg_intf_desc.bNumEndpoints = i; ++ fsg_intf_desc.bInterfaceSubClass = mod_data.protocol_type; ++ fsg_intf_desc.bInterfaceProtocol = mod_data.transport_type; ++ fsg_fs_function[i + FSG_FS_FUNCTION_PRE_EP_ENTRIES] = NULL; ++ ++ if (gadget_is_dualspeed(gadget)) { ++ fsg_hs_function[i + FSG_HS_FUNCTION_PRE_EP_ENTRIES] = NULL; ++ ++ /* Assume endpoint addresses are the same for both speeds */ ++ fsg_hs_bulk_in_desc.bEndpointAddress = ++ fsg_fs_bulk_in_desc.bEndpointAddress; ++ fsg_hs_bulk_out_desc.bEndpointAddress = ++ fsg_fs_bulk_out_desc.bEndpointAddress; ++ fsg_hs_intr_in_desc.bEndpointAddress = ++ fsg_fs_intr_in_desc.bEndpointAddress; ++ } ++ ++ if (gadget_is_superspeed(gadget)) { ++ unsigned max_burst; ++ ++ fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL; ++ ++ /* Calculate bMaxBurst, we know packet size is 1024 */ ++ max_burst = min_t(unsigned, mod_data.buflen / 1024, 15); ++ ++ /* Assume endpoint addresses are the same for both speeds */ ++ fsg_ss_bulk_in_desc.bEndpointAddress = ++ fsg_fs_bulk_in_desc.bEndpointAddress; ++ fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; ++ ++ fsg_ss_bulk_out_desc.bEndpointAddress = ++ fsg_fs_bulk_out_desc.bEndpointAddress; ++ fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; ++ } ++ ++ if (gadget_is_otg(gadget)) ++ fsg_otg_desc.bmAttributes |= USB_OTG_HNP; ++ ++ rc = -ENOMEM; ++ ++ /* Allocate the request and buffer for endpoint 0 */ ++ fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL); ++ if (!req) ++ goto out; ++ req->buf = kmalloc(EP0_BUFSIZE, GFP_KERNEL); ++ if (!req->buf) ++ goto out; ++ req->complete = ep0_complete; ++ ++ /* Allocate the data buffers */ ++ for (i = 0; i < fsg_num_buffers; ++i) { ++ struct fsg_buffhd *bh = &fsg->buffhds[i]; ++ ++ /* Allocate for the bulk-in endpoint. We assume that ++ * the buffer will also work with the bulk-out (and ++ * interrupt-in) endpoint. */ ++ bh->buf = kmalloc(mod_data.buflen, GFP_KERNEL); ++ if (!bh->buf) ++ goto out; ++ bh->next = bh + 1; ++ } ++ fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0]; ++ ++ /* This should reflect the actual gadget power source */ ++ usb_gadget_set_selfpowered(gadget); ++ ++ snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer, ++ "%s %s with %s", ++ init_utsname()->sysname, init_utsname()->release, ++ gadget->name); ++ ++ fsg->thread_task = kthread_create(fsg_main_thread, fsg, ++ "file-storage-gadget"); ++ if (IS_ERR(fsg->thread_task)) { ++ rc = PTR_ERR(fsg->thread_task); ++ goto out; ++ } ++ ++ INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); ++ INFO(fsg, "NOTE: This driver is deprecated. " ++ "Consider using g_mass_storage instead.\n"); ++ INFO(fsg, "Number of LUNs=%d\n", fsg->nluns); ++ ++ pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); ++ for (i = 0; i < fsg->nluns; ++i) { ++ curlun = &fsg->luns[i]; ++ if (fsg_lun_is_open(curlun)) { ++ p = NULL; ++ if (pathbuf) { ++ p = d_path(&curlun->filp->f_path, ++ pathbuf, PATH_MAX); ++ if (IS_ERR(p)) ++ p = NULL; ++ } ++ LINFO(curlun, "ro=%d, nofua=%d, file: %s\n", ++ curlun->ro, curlun->nofua, (p ? p : "(error)")); ++ } ++ } ++ kfree(pathbuf); ++ ++ DBG(fsg, "transport=%s (x%02x)\n", ++ mod_data.transport_name, mod_data.transport_type); ++ DBG(fsg, "protocol=%s (x%02x)\n", ++ mod_data.protocol_name, mod_data.protocol_type); ++ DBG(fsg, "VendorID=x%04x, ProductID=x%04x, Release=x%04x\n", ++ mod_data.vendor, mod_data.product, mod_data.release); ++ DBG(fsg, "removable=%d, stall=%d, cdrom=%d, buflen=%u\n", ++ mod_data.removable, mod_data.can_stall, ++ mod_data.cdrom, mod_data.buflen); ++ DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task)); ++ ++ set_bit(REGISTERED, &fsg->atomic_bitflags); ++ ++ /* Tell the thread to start working */ ++ wake_up_process(fsg->thread_task); ++ return 0; ++ ++autoconf_fail: ++ ERROR(fsg, "unable to autoconfigure all endpoints\n"); ++ rc = -ENOTSUPP; ++ ++out: ++ fsg->state = FSG_STATE_TERMINATED; // The thread is dead ++ fsg_unbind(gadget); ++ complete(&fsg->thread_notifier); ++ return rc; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void fsg_suspend(struct usb_gadget *gadget) ++{ ++ struct fsg_dev *fsg = get_gadget_data(gadget); ++ ++ DBG(fsg, "suspend\n"); ++ set_bit(SUSPENDED, &fsg->atomic_bitflags); ++} ++ ++static void fsg_resume(struct usb_gadget *gadget) ++{ ++ struct fsg_dev *fsg = get_gadget_data(gadget); ++ ++ DBG(fsg, "resume\n"); ++ clear_bit(SUSPENDED, &fsg->atomic_bitflags); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static struct usb_gadget_driver fsg_driver = { ++ .max_speed = USB_SPEED_SUPER, ++ .function = (char *) fsg_string_product, ++ .unbind = fsg_unbind, ++ .disconnect = fsg_disconnect, ++ .setup = fsg_setup, ++ .suspend = fsg_suspend, ++ .resume = fsg_resume, ++ ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ // .release = ... ++ // .suspend = ... ++ // .resume = ... ++ }, ++}; ++ ++ ++static int __init fsg_alloc(void) ++{ ++ struct fsg_dev *fsg; ++ ++ fsg = kzalloc(sizeof *fsg + ++ fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL); ++ ++ if (!fsg) ++ return -ENOMEM; ++ spin_lock_init(&fsg->lock); ++ init_rwsem(&fsg->filesem); ++ kref_init(&fsg->ref); ++ init_completion(&fsg->thread_notifier); ++ ++ the_fsg = fsg; ++ return 0; ++} ++ ++ ++static int __init fsg_init(void) ++{ ++ int rc; ++ struct fsg_dev *fsg; ++ ++ rc = fsg_num_buffers_validate(); ++ if (rc != 0) ++ return rc; ++ ++ if ((rc = fsg_alloc()) != 0) ++ return rc; ++ fsg = the_fsg; ++ if ((rc = usb_gadget_probe_driver(&fsg_driver, fsg_bind)) != 0) ++ kref_put(&fsg->ref, fsg_release); ++ return rc; ++} ++module_init(fsg_init); ++ ++ ++static void __exit fsg_cleanup(void) ++{ ++ struct fsg_dev *fsg = the_fsg; ++ ++ /* Unregister the driver iff the thread hasn't already done so */ ++ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) ++ usb_gadget_unregister_driver(&fsg_driver); ++ ++ /* Wait for the thread to finish up */ ++ wait_for_completion(&fsg->thread_notifier); ++ ++ kref_put(&fsg->ref, fsg_release); ++} ++module_exit(fsg_cleanup); +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -762,6 +762,19 @@ config USB_HWA_HCD + To compile this driver a module, choose M here: the module + will be called "hwa-hc". + ++config USB_DWCOTG ++ tristate "Synopsis DWC host support" ++ depends on USB ++ help ++ The Synopsis DWC controller is a dual-role ++ host/peripheral/OTG ("On The Go") USB controllers. ++ ++ Enable this option to support this IP in host controller mode. ++ If unsure, say N. ++ ++ To compile this driver as a module, choose M here: the ++ modules built will be called dwc_otg and dwc_common_port. ++ + config USB_IMX21_HCD + tristate "i.MX21 HCD support" + depends on ARM && ARCH_MXC +--- a/drivers/usb/host/Makefile ++++ b/drivers/usb/host/Makefile +@@ -74,6 +74,8 @@ obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o + obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o + obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o + obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o ++ ++obj-$(CONFIG_USB_DWCOTG) += dwc_otg/ dwc_common_port/ + obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o + obj-$(CONFIG_USB_FSL_USB2) += fsl-mph-dr-of.o + obj-$(CONFIG_USB_EHCI_FSL) += fsl-mph-dr-of.o +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/Makefile +@@ -0,0 +1,58 @@ ++# ++# Makefile for DWC_common library ++# ++ ++ifneq ($(KERNELRELEASE),) ++ ++ccflags-y += -DDWC_LINUX ++#ccflags-y += -DDEBUG ++#ccflags-y += -DDWC_DEBUG_REGS ++#ccflags-y += -DDWC_DEBUG_MEMORY ++ ++ccflags-y += -DDWC_LIBMODULE ++ccflags-y += -DDWC_CCLIB ++#ccflags-y += -DDWC_CRYPTOLIB ++ccflags-y += -DDWC_NOTIFYLIB ++ccflags-y += -DDWC_UTFLIB ++ ++obj-$(CONFIG_USB_DWCOTG) += dwc_common_port_lib.o ++dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \ ++ dwc_crypto.o dwc_notifier.o \ ++ dwc_common_linux.o dwc_mem.o ++ ++kernrelwd := $(subst ., ,$(KERNELRELEASE)) ++kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd)) ++ ++ifneq ($(kernrel3),2.6.20) ++# grayg - I only know that we use ccflags-y in 2.6.31 actually ++ccflags-y += $(CPPFLAGS) ++endif ++ ++else ++ ++#ifeq ($(KDIR),) ++#$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment) ++#endif ++ ++ifeq ($(ARCH),) ++$(error Must give "ARCH=" on command line or in environment. Also, if \ ++ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-") ++endif ++ ++ifeq ($(DOXYGEN),) ++DOXYGEN := doxygen ++endif ++ ++default: ++ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules ++ ++docs: $(wildcard *.[hc]) doc/doxygen.cfg ++ $(DOXYGEN) doc/doxygen.cfg ++ ++tags: $(wildcard *.[hc]) ++ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) ++ ++endif ++ ++clean: ++ rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/Makefile.fbsd +@@ -0,0 +1,17 @@ ++CFLAGS += -I/sys/i386/compile/GENERIC -I/sys/i386/include -I/usr/include ++CFLAGS += -DDWC_FREEBSD ++CFLAGS += -DDEBUG ++#CFLAGS += -DDWC_DEBUG_REGS ++#CFLAGS += -DDWC_DEBUG_MEMORY ++ ++#CFLAGS += -DDWC_LIBMODULE ++#CFLAGS += -DDWC_CCLIB ++#CFLAGS += -DDWC_CRYPTOLIB ++#CFLAGS += -DDWC_NOTIFYLIB ++#CFLAGS += -DDWC_UTFLIB ++ ++KMOD = dwc_common_port_lib ++SRCS = dwc_cc.c dwc_modpow.c dwc_dh.c dwc_crypto.c dwc_notifier.c \ ++ dwc_common_fbsd.c dwc_mem.c ++ ++.include +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/Makefile.linux +@@ -0,0 +1,49 @@ ++# ++# Makefile for DWC_common library ++# ++ifneq ($(KERNELRELEASE),) ++ ++ccflags-y += -DDWC_LINUX ++#ccflags-y += -DDEBUG ++#ccflags-y += -DDWC_DEBUG_REGS ++#ccflags-y += -DDWC_DEBUG_MEMORY ++ ++ccflags-y += -DDWC_LIBMODULE ++ccflags-y += -DDWC_CCLIB ++ccflags-y += -DDWC_CRYPTOLIB ++ccflags-y += -DDWC_NOTIFYLIB ++ccflags-y += -DDWC_UTFLIB ++ ++obj-m := dwc_common_port_lib.o ++dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \ ++ dwc_crypto.o dwc_notifier.o \ ++ dwc_common_linux.o dwc_mem.o ++ ++else ++ ++ifeq ($(KDIR),) ++$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment) ++endif ++ ++ifeq ($(ARCH),) ++$(error Must give "ARCH=" on command line or in environment. Also, if \ ++ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-") ++endif ++ ++ifeq ($(DOXYGEN),) ++DOXYGEN := doxygen ++endif ++ ++default: ++ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules ++ ++docs: $(wildcard *.[hc]) doc/doxygen.cfg ++ $(DOXYGEN) doc/doxygen.cfg ++ ++tags: $(wildcard *.[hc]) ++ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) ++ ++endif ++ ++clean: ++ rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/changes.txt +@@ -0,0 +1,174 @@ ++ ++dwc_read_reg32() and friends now take an additional parameter, a pointer to an ++IO context struct. The IO context struct should live in an os-dependent struct ++in your driver. As an example, the dwc_usb3 driver has an os-dependent struct ++named 'os_dep' embedded in the main device struct. So there these calls look ++like this: ++ ++ dwc_read_reg32(&usb3_dev->os_dep.ioctx, &pcd->dev_global_regs->dcfg); ++ ++ dwc_write_reg32(&usb3_dev->os_dep.ioctx, ++ &pcd->dev_global_regs->dcfg, 0); ++ ++Note that for the existing Linux driver ports, it is not necessary to actually ++define the 'ioctx' member in the os-dependent struct. Since Linux does not ++require an IO context, its macros for dwc_read_reg32() and friends do not ++use the context pointer, so it is optimized away by the compiler. But it is ++necessary to add the pointer parameter to all of the call sites, to be ready ++for any future ports (such as FreeBSD) which do require an IO context. ++ ++ ++Similarly, dwc_alloc(), dwc_alloc_atomic(), dwc_strdup(), and dwc_free() now ++take an additional parameter, a pointer to a memory context. Examples: ++ ++ addr = dwc_alloc(&usb3_dev->os_dep.memctx, size); ++ ++ dwc_free(&usb3_dev->os_dep.memctx, addr); ++ ++Again, for the Linux ports, it is not necessary to actually define the memctx ++member, but it is necessary to add the pointer parameter to all of the call ++sites. ++ ++ ++Same for dwc_dma_alloc() and dwc_dma_free(). Examples: ++ ++ virt_addr = dwc_dma_alloc(&usb3_dev->os_dep.dmactx, size, &phys_addr); ++ ++ dwc_dma_free(&usb3_dev->os_dep.dmactx, size, virt_addr, phys_addr); ++ ++ ++Same for dwc_mutex_alloc() and dwc_mutex_free(). Examples: ++ ++ mutex = dwc_mutex_alloc(&usb3_dev->os_dep.mtxctx); ++ ++ dwc_mutex_free(&usb3_dev->os_dep.mtxctx, mutex); ++ ++ ++Same for dwc_spinlock_alloc() and dwc_spinlock_free(). Examples: ++ ++ lock = dwc_spinlock_alloc(&usb3_dev->osdep.splctx); ++ ++ dwc_spinlock_free(&usb3_dev->osdep.splctx, lock); ++ ++ ++Same for dwc_timer_alloc(). Example: ++ ++ timer = dwc_timer_alloc(&usb3_dev->os_dep.tmrctx, "dwc_usb3_tmr1", ++ cb_func, cb_data); ++ ++ ++Same for dwc_waitq_alloc(). Example: ++ ++ waitq = dwc_waitq_alloc(&usb3_dev->os_dep.wtqctx); ++ ++ ++Same for dwc_thread_run(). Example: ++ ++ thread = dwc_thread_run(&usb3_dev->os_dep.thdctx, func, ++ "dwc_usb3_thd1", data); ++ ++ ++Same for dwc_workq_alloc(). Example: ++ ++ workq = dwc_workq_alloc(&usb3_dev->osdep.wkqctx, "dwc_usb3_wkq1"); ++ ++ ++Same for dwc_task_alloc(). Example: ++ ++ task = dwc_task_alloc(&usb3_dev->os_dep.tskctx, "dwc_usb3_tsk1", ++ cb_func, cb_data); ++ ++ ++In addition to the context pointer additions, a few core functions have had ++other changes made to their parameters: ++ ++The 'flags' parameter to dwc_spinlock_irqsave() and dwc_spinunlock_irqrestore() ++has been changed from a uint64_t to a dwc_irqflags_t. ++ ++dwc_thread_should_stop() now takes a 'dwc_thread_t *' parameter, because the ++FreeBSD equivalent of that function requires it. ++ ++And, in addition to the context pointer, dwc_task_alloc() also adds a ++'char *name' parameter, to be consistent with dwc_thread_run() and ++dwc_workq_alloc(), and because the FreeBSD equivalent of that function ++requires a unique name. ++ ++ ++Here is a complete list of the core functions that now take a pointer to a ++context as their first parameter: ++ ++ dwc_read_reg32 ++ dwc_read_reg64 ++ dwc_write_reg32 ++ dwc_write_reg64 ++ dwc_modify_reg32 ++ dwc_modify_reg64 ++ dwc_alloc ++ dwc_alloc_atomic ++ dwc_strdup ++ dwc_free ++ dwc_dma_alloc ++ dwc_dma_free ++ dwc_mutex_alloc ++ dwc_mutex_free ++ dwc_spinlock_alloc ++ dwc_spinlock_free ++ dwc_timer_alloc ++ dwc_waitq_alloc ++ dwc_thread_run ++ dwc_workq_alloc ++ dwc_task_alloc Also adds a 'char *name' as its 2nd parameter ++ ++And here are the core functions that have other changes to their parameters: ++ ++ dwc_spinlock_irqsave 'flags' param is now a 'dwc_irqflags_t *' ++ dwc_spinunlock_irqrestore 'flags' param is now a 'dwc_irqflags_t' ++ dwc_thread_should_stop Adds a 'dwc_thread_t *' parameter ++ ++ ++ ++The changes to the core functions also require some of the other library ++functions to change: ++ ++ dwc_cc_if_alloc() and dwc_cc_if_free() now take a 'void *memctx' ++ (for memory allocation) as the 1st param and a 'void *mtxctx' ++ (for mutex allocation) as the 2nd param. ++ ++ dwc_cc_clear(), dwc_cc_add(), dwc_cc_change(), dwc_cc_remove(), ++ dwc_cc_data_for_save(), and dwc_cc_restore_from_data() now take a ++ 'void *memctx' as the 1st param. ++ ++ dwc_dh_modpow(), dwc_dh_pk(), and dwc_dh_derive_keys() now take a ++ 'void *memctx' as the 1st param. ++ ++ dwc_modpow() now takes a 'void *memctx' as the 1st param. ++ ++ dwc_alloc_notification_manager() now takes a 'void *memctx' as the ++ 1st param and a 'void *wkqctx' (for work queue allocation) as the 2nd ++ param, and also now returns an integer value that is non-zero if ++ allocation of its data structures or work queue fails. ++ ++ dwc_register_notifier() now takes a 'void *memctx' as the 1st param. ++ ++ dwc_memory_debug_start() now takes a 'void *mem_ctx' as the first ++ param, and also now returns an integer value that is non-zero if ++ allocation of its data structures fails. ++ ++ ++ ++Other miscellaneous changes: ++ ++The DEBUG_MEMORY and DEBUG_REGS #define's have been renamed to ++DWC_DEBUG_MEMORY and DWC_DEBUG_REGS. ++ ++The following #define's have been added to allow selectively compiling library ++features: ++ ++ DWC_CCLIB ++ DWC_CRYPTOLIB ++ DWC_NOTIFYLIB ++ DWC_UTFLIB ++ ++A DWC_LIBMODULE #define has also been added. If this is not defined, then the ++module code in dwc_common_linux.c is not compiled in. This allows linking the ++library code directly into a driver module, instead of as a standalone module. +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/doc/doxygen.cfg +@@ -0,0 +1,270 @@ ++# Doxyfile 1.4.5 ++ ++#--------------------------------------------------------------------------- ++# Project related configuration options ++#--------------------------------------------------------------------------- ++PROJECT_NAME = "Synopsys DWC Portability and Common Library for UWB" ++PROJECT_NUMBER = ++OUTPUT_DIRECTORY = doc ++CREATE_SUBDIRS = NO ++OUTPUT_LANGUAGE = English ++BRIEF_MEMBER_DESC = YES ++REPEAT_BRIEF = YES ++ABBREVIATE_BRIEF = "The $name class" \ ++ "The $name widget" \ ++ "The $name file" \ ++ is \ ++ provides \ ++ specifies \ ++ contains \ ++ represents \ ++ a \ ++ an \ ++ the ++ALWAYS_DETAILED_SEC = YES ++INLINE_INHERITED_MEMB = NO ++FULL_PATH_NAMES = NO ++STRIP_FROM_PATH = .. ++STRIP_FROM_INC_PATH = ++SHORT_NAMES = NO ++JAVADOC_AUTOBRIEF = YES ++MULTILINE_CPP_IS_BRIEF = NO ++DETAILS_AT_TOP = YES ++INHERIT_DOCS = YES ++SEPARATE_MEMBER_PAGES = NO ++TAB_SIZE = 8 ++ALIASES = ++OPTIMIZE_OUTPUT_FOR_C = YES ++OPTIMIZE_OUTPUT_JAVA = NO ++BUILTIN_STL_SUPPORT = NO ++DISTRIBUTE_GROUP_DOC = NO ++SUBGROUPING = NO ++#--------------------------------------------------------------------------- ++# Build related configuration options ++#--------------------------------------------------------------------------- ++EXTRACT_ALL = NO ++EXTRACT_PRIVATE = NO ++EXTRACT_STATIC = YES ++EXTRACT_LOCAL_CLASSES = NO ++EXTRACT_LOCAL_METHODS = NO ++HIDE_UNDOC_MEMBERS = NO ++HIDE_UNDOC_CLASSES = NO ++HIDE_FRIEND_COMPOUNDS = NO ++HIDE_IN_BODY_DOCS = NO ++INTERNAL_DOCS = NO ++CASE_SENSE_NAMES = YES ++HIDE_SCOPE_NAMES = NO ++SHOW_INCLUDE_FILES = NO ++INLINE_INFO = YES ++SORT_MEMBER_DOCS = NO ++SORT_BRIEF_DOCS = NO ++SORT_BY_SCOPE_NAME = NO ++GENERATE_TODOLIST = YES ++GENERATE_TESTLIST = YES ++GENERATE_BUGLIST = YES ++GENERATE_DEPRECATEDLIST= YES ++ENABLED_SECTIONS = ++MAX_INITIALIZER_LINES = 30 ++SHOW_USED_FILES = YES ++SHOW_DIRECTORIES = YES ++FILE_VERSION_FILTER = ++#--------------------------------------------------------------------------- ++# configuration options related to warning and progress messages ++#--------------------------------------------------------------------------- ++QUIET = YES ++WARNINGS = YES ++WARN_IF_UNDOCUMENTED = NO ++WARN_IF_DOC_ERROR = YES ++WARN_NO_PARAMDOC = YES ++WARN_FORMAT = "$file:$line: $text" ++WARN_LOGFILE = ++#--------------------------------------------------------------------------- ++# configuration options related to the input files ++#--------------------------------------------------------------------------- ++INPUT = . ++FILE_PATTERNS = *.c \ ++ *.cc \ ++ *.cxx \ ++ *.cpp \ ++ *.c++ \ ++ *.d \ ++ *.java \ ++ *.ii \ ++ *.ixx \ ++ *.ipp \ ++ *.i++ \ ++ *.inl \ ++ *.h \ ++ *.hh \ ++ *.hxx \ ++ *.hpp \ ++ *.h++ \ ++ *.idl \ ++ *.odl \ ++ *.cs \ ++ *.php \ ++ *.php3 \ ++ *.inc \ ++ *.m \ ++ *.mm \ ++ *.dox \ ++ *.py \ ++ *.C \ ++ *.CC \ ++ *.C++ \ ++ *.II \ ++ *.I++ \ ++ *.H \ ++ *.HH \ ++ *.H++ \ ++ *.CS \ ++ *.PHP \ ++ *.PHP3 \ ++ *.M \ ++ *.MM \ ++ *.PY ++RECURSIVE = NO ++EXCLUDE = ++EXCLUDE_SYMLINKS = NO ++EXCLUDE_PATTERNS = ++EXAMPLE_PATH = ++EXAMPLE_PATTERNS = * ++EXAMPLE_RECURSIVE = NO ++IMAGE_PATH = ++INPUT_FILTER = ++FILTER_PATTERNS = ++FILTER_SOURCE_FILES = NO ++#--------------------------------------------------------------------------- ++# configuration options related to source browsing ++#--------------------------------------------------------------------------- ++SOURCE_BROWSER = NO ++INLINE_SOURCES = NO ++STRIP_CODE_COMMENTS = YES ++REFERENCED_BY_RELATION = YES ++REFERENCES_RELATION = YES ++USE_HTAGS = NO ++VERBATIM_HEADERS = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the alphabetical class index ++#--------------------------------------------------------------------------- ++ALPHABETICAL_INDEX = NO ++COLS_IN_ALPHA_INDEX = 5 ++IGNORE_PREFIX = ++#--------------------------------------------------------------------------- ++# configuration options related to the HTML output ++#--------------------------------------------------------------------------- ++GENERATE_HTML = YES ++HTML_OUTPUT = html ++HTML_FILE_EXTENSION = .html ++HTML_HEADER = ++HTML_FOOTER = ++HTML_STYLESHEET = ++HTML_ALIGN_MEMBERS = YES ++GENERATE_HTMLHELP = NO ++CHM_FILE = ++HHC_LOCATION = ++GENERATE_CHI = NO ++BINARY_TOC = NO ++TOC_EXPAND = NO ++DISABLE_INDEX = NO ++ENUM_VALUES_PER_LINE = 4 ++GENERATE_TREEVIEW = YES ++TREEVIEW_WIDTH = 250 ++#--------------------------------------------------------------------------- ++# configuration options related to the LaTeX output ++#--------------------------------------------------------------------------- ++GENERATE_LATEX = NO ++LATEX_OUTPUT = latex ++LATEX_CMD_NAME = latex ++MAKEINDEX_CMD_NAME = makeindex ++COMPACT_LATEX = NO ++PAPER_TYPE = a4wide ++EXTRA_PACKAGES = ++LATEX_HEADER = ++PDF_HYPERLINKS = NO ++USE_PDFLATEX = NO ++LATEX_BATCHMODE = NO ++LATEX_HIDE_INDICES = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the RTF output ++#--------------------------------------------------------------------------- ++GENERATE_RTF = NO ++RTF_OUTPUT = rtf ++COMPACT_RTF = NO ++RTF_HYPERLINKS = NO ++RTF_STYLESHEET_FILE = ++RTF_EXTENSIONS_FILE = ++#--------------------------------------------------------------------------- ++# configuration options related to the man page output ++#--------------------------------------------------------------------------- ++GENERATE_MAN = NO ++MAN_OUTPUT = man ++MAN_EXTENSION = .3 ++MAN_LINKS = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the XML output ++#--------------------------------------------------------------------------- ++GENERATE_XML = NO ++XML_OUTPUT = xml ++XML_SCHEMA = ++XML_DTD = ++XML_PROGRAMLISTING = YES ++#--------------------------------------------------------------------------- ++# configuration options for the AutoGen Definitions output ++#--------------------------------------------------------------------------- ++GENERATE_AUTOGEN_DEF = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the Perl module output ++#--------------------------------------------------------------------------- ++GENERATE_PERLMOD = NO ++PERLMOD_LATEX = NO ++PERLMOD_PRETTY = YES ++PERLMOD_MAKEVAR_PREFIX = ++#--------------------------------------------------------------------------- ++# Configuration options related to the preprocessor ++#--------------------------------------------------------------------------- ++ENABLE_PREPROCESSING = YES ++MACRO_EXPANSION = NO ++EXPAND_ONLY_PREDEF = NO ++SEARCH_INCLUDES = YES ++INCLUDE_PATH = ++INCLUDE_FILE_PATTERNS = ++PREDEFINED = DEBUG DEBUG_MEMORY ++EXPAND_AS_DEFINED = ++SKIP_FUNCTION_MACROS = YES ++#--------------------------------------------------------------------------- ++# Configuration::additions related to external references ++#--------------------------------------------------------------------------- ++TAGFILES = ++GENERATE_TAGFILE = ++ALLEXTERNALS = NO ++EXTERNAL_GROUPS = YES ++PERL_PATH = /usr/bin/perl ++#--------------------------------------------------------------------------- ++# Configuration options related to the dot tool ++#--------------------------------------------------------------------------- ++CLASS_DIAGRAMS = YES ++HIDE_UNDOC_RELATIONS = YES ++HAVE_DOT = NO ++CLASS_GRAPH = YES ++COLLABORATION_GRAPH = YES ++GROUP_GRAPHS = YES ++UML_LOOK = NO ++TEMPLATE_RELATIONS = NO ++INCLUDE_GRAPH = NO ++INCLUDED_BY_GRAPH = YES ++CALL_GRAPH = NO ++GRAPHICAL_HIERARCHY = YES ++DIRECTORY_GRAPH = YES ++DOT_IMAGE_FORMAT = png ++DOT_PATH = ++DOTFILE_DIRS = ++MAX_DOT_GRAPH_DEPTH = 1000 ++DOT_TRANSPARENT = NO ++DOT_MULTI_TARGETS = NO ++GENERATE_LEGEND = YES ++DOT_CLEANUP = YES ++#--------------------------------------------------------------------------- ++# Configuration::additions related to the search engine ++#--------------------------------------------------------------------------- ++SEARCHENGINE = NO +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_cc.c +@@ -0,0 +1,532 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.c $ ++ * $Revision: #4 $ ++ * $Date: 2010/11/04 $ ++ * $Change: 1621692 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++#ifdef DWC_CCLIB ++ ++#include "dwc_cc.h" ++ ++typedef struct dwc_cc ++{ ++ uint32_t uid; ++ uint8_t chid[16]; ++ uint8_t cdid[16]; ++ uint8_t ck[16]; ++ uint8_t *name; ++ uint8_t length; ++ DWC_CIRCLEQ_ENTRY(dwc_cc) list_entry; ++} dwc_cc_t; ++ ++DWC_CIRCLEQ_HEAD(context_list, dwc_cc); ++ ++/** The main structure for CC management. */ ++struct dwc_cc_if ++{ ++ dwc_mutex_t *mutex; ++ char *filename; ++ ++ unsigned is_host:1; ++ ++ dwc_notifier_t *notifier; ++ ++ struct context_list list; ++}; ++ ++#ifdef DEBUG ++static inline void dump_bytes(char *name, uint8_t *bytes, int len) ++{ ++ int i; ++ DWC_PRINTF("%s: ", name); ++ for (i=0; ilength = length; ++ cc->name = dwc_alloc(mem_ctx, length); ++ if (!cc->name) { ++ dwc_free(mem_ctx, cc); ++ return NULL; ++ } ++ ++ DWC_MEMCPY(cc->name, name, length); ++ } ++ ++ return cc; ++} ++ ++static void free_cc(void *mem_ctx, dwc_cc_t *cc) ++{ ++ if (cc->name) { ++ dwc_free(mem_ctx, cc->name); ++ } ++ dwc_free(mem_ctx, cc); ++} ++ ++static uint32_t next_uid(dwc_cc_if_t *cc_if) ++{ ++ uint32_t uid = 0; ++ dwc_cc_t *cc; ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ if (cc->uid > uid) { ++ uid = cc->uid; ++ } ++ } ++ ++ if (uid == 0) { ++ uid = 255; ++ } ++ ++ return uid + 1; ++} ++ ++static dwc_cc_t *cc_find(dwc_cc_if_t *cc_if, uint32_t uid) ++{ ++ dwc_cc_t *cc; ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ if (cc->uid == uid) { ++ return cc; ++ } ++ } ++ return NULL; ++} ++ ++static unsigned int cc_data_size(dwc_cc_if_t *cc_if) ++{ ++ unsigned int size = 0; ++ dwc_cc_t *cc; ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ size += (48 + 1); ++ if (cc->name) { ++ size += cc->length; ++ } ++ } ++ return size; ++} ++ ++static uint32_t cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid) ++{ ++ uint32_t uid = 0; ++ dwc_cc_t *cc; ++ ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ if (DWC_MEMCMP(cc->chid, chid, 16) == 0) { ++ uid = cc->uid; ++ break; ++ } ++ } ++ return uid; ++} ++static uint32_t cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid) ++{ ++ uint32_t uid = 0; ++ dwc_cc_t *cc; ++ ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ if (DWC_MEMCMP(cc->cdid, cdid, 16) == 0) { ++ uid = cc->uid; ++ break; ++ } ++ } ++ return uid; ++} ++ ++/* Internal cc_add */ ++static int32_t cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid, ++ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) ++{ ++ dwc_cc_t *cc; ++ uint32_t uid; ++ ++ if (cc_if->is_host) { ++ uid = cc_match_cdid(cc_if, cdid); ++ } ++ else { ++ uid = cc_match_chid(cc_if, chid); ++ } ++ ++ if (uid) { ++ DWC_DEBUGC("Replacing previous connection context id=%d name=%p name_len=%d", uid, name, length); ++ cc = cc_find(cc_if, uid); ++ } ++ else { ++ cc = alloc_cc(mem_ctx, name, length); ++ cc->uid = next_uid(cc_if); ++ DWC_CIRCLEQ_INSERT_TAIL(&cc_if->list, cc, list_entry); ++ } ++ ++ DWC_MEMCPY(&(cc->chid[0]), chid, 16); ++ DWC_MEMCPY(&(cc->cdid[0]), cdid, 16); ++ DWC_MEMCPY(&(cc->ck[0]), ck, 16); ++ ++ DWC_DEBUGC("Added connection context id=%d name=%p name_len=%d", cc->uid, name, length); ++ dump_bytes("CHID", cc->chid, 16); ++ dump_bytes("CDID", cc->cdid, 16); ++ dump_bytes("CK", cc->ck, 16); ++ return cc->uid; ++} ++ ++/* Internal cc_clear */ ++static void cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if) ++{ ++ while (!DWC_CIRCLEQ_EMPTY(&cc_if->list)) { ++ dwc_cc_t *cc = DWC_CIRCLEQ_FIRST(&cc_if->list); ++ DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry); ++ free_cc(mem_ctx, cc); ++ } ++} ++ ++dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx, ++ dwc_notifier_t *notifier, unsigned is_host) ++{ ++ dwc_cc_if_t *cc_if = NULL; ++ ++ /* Allocate a common_cc_if structure */ ++ cc_if = dwc_alloc(mem_ctx, sizeof(dwc_cc_if_t)); ++ ++ if (!cc_if) ++ return NULL; ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++ DWC_MUTEX_ALLOC_LINUX_DEBUG(cc_if->mutex); ++#else ++ cc_if->mutex = dwc_mutex_alloc(mtx_ctx); ++#endif ++ if (!cc_if->mutex) { ++ dwc_free(mem_ctx, cc_if); ++ return NULL; ++ } ++ ++ DWC_CIRCLEQ_INIT(&cc_if->list); ++ cc_if->is_host = is_host; ++ cc_if->notifier = notifier; ++ return cc_if; ++} ++ ++void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if) ++{ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++ DWC_MUTEX_FREE(cc_if->mutex); ++#else ++ dwc_mutex_free(mtx_ctx, cc_if->mutex); ++#endif ++ cc_clear(mem_ctx, cc_if); ++ dwc_free(mem_ctx, cc_if); ++} ++ ++static void cc_changed(dwc_cc_if_t *cc_if) ++{ ++ if (cc_if->notifier) { ++ dwc_notify(cc_if->notifier, DWC_CC_LIST_CHANGED_NOTIFICATION, cc_if); ++ } ++} ++ ++void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if) ++{ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc_clear(mem_ctx, cc_if); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ cc_changed(cc_if); ++} ++ ++int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid, ++ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) ++{ ++ uint32_t uid; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ uid = cc_add(mem_ctx, cc_if, chid, cdid, ck, name, length); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ cc_changed(cc_if); ++ ++ return uid; ++} ++ ++void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id, uint8_t *chid, ++ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) ++{ ++ dwc_cc_t* cc; ++ ++ DWC_DEBUGC("Change connection context %d", id); ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (!cc) { ++ DWC_ERROR("Uid %d not found in cc list\n", id); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return; ++ } ++ ++ if (chid) { ++ DWC_MEMCPY(&(cc->chid[0]), chid, 16); ++ } ++ if (cdid) { ++ DWC_MEMCPY(&(cc->cdid[0]), cdid, 16); ++ } ++ if (ck) { ++ DWC_MEMCPY(&(cc->ck[0]), ck, 16); ++ } ++ ++ if (name) { ++ if (cc->name) { ++ dwc_free(mem_ctx, cc->name); ++ } ++ cc->name = dwc_alloc(mem_ctx, length); ++ if (!cc->name) { ++ DWC_ERROR("Out of memory in dwc_cc_change()\n"); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return; ++ } ++ cc->length = length; ++ DWC_MEMCPY(cc->name, name, length); ++ } ++ ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ cc_changed(cc_if); ++ ++ DWC_DEBUGC("Changed connection context id=%d\n", id); ++ dump_bytes("New CHID", cc->chid, 16); ++ dump_bytes("New CDID", cc->cdid, 16); ++ dump_bytes("New CK", cc->ck, 16); ++} ++ ++void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id) ++{ ++ dwc_cc_t *cc; ++ ++ DWC_DEBUGC("Removing connection context %d", id); ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (!cc) { ++ DWC_ERROR("Uid %d not found in cc list\n", id); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return; ++ } ++ ++ DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ free_cc(mem_ctx, cc); ++ ++ cc_changed(cc_if); ++} ++ ++uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if, unsigned int *length) ++{ ++ uint8_t *buf, *x; ++ uint8_t zero = 0; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ *length = cc_data_size(cc_if); ++ if (!(*length)) { ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return NULL; ++ } ++ ++ DWC_DEBUGC("Creating data for saving (length=%d)", *length); ++ ++ buf = dwc_alloc(mem_ctx, *length); ++ if (!buf) { ++ *length = 0; ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return NULL; ++ } ++ ++ x = buf; ++ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { ++ DWC_MEMCPY(x, cc->chid, 16); ++ x += 16; ++ DWC_MEMCPY(x, cc->cdid, 16); ++ x += 16; ++ DWC_MEMCPY(x, cc->ck, 16); ++ x += 16; ++ if (cc->name) { ++ DWC_MEMCPY(x, &cc->length, 1); ++ x += 1; ++ DWC_MEMCPY(x, cc->name, cc->length); ++ x += cc->length; ++ } ++ else { ++ DWC_MEMCPY(x, &zero, 1); ++ x += 1; ++ } ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return buf; ++} ++ ++void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *data, uint32_t length) ++{ ++ uint8_t name_length; ++ uint8_t *name; ++ uint8_t *chid; ++ uint8_t *cdid; ++ uint8_t *ck; ++ uint32_t i = 0; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc_clear(mem_ctx, cc_if); ++ ++ while (i < length) { ++ chid = &data[i]; ++ i += 16; ++ cdid = &data[i]; ++ i += 16; ++ ck = &data[i]; ++ i += 16; ++ ++ name_length = data[i]; ++ i ++; ++ ++ if (name_length) { ++ name = &data[i]; ++ i += name_length; ++ } ++ else { ++ name = NULL; ++ } ++ ++ /* check to see if we haven't overflown the buffer */ ++ if (i > length) { ++ DWC_ERROR("Data format error while attempting to load CCs " ++ "(nlen=%d, iter=%d, buflen=%d).\n", name_length, i, length); ++ break; ++ } ++ ++ cc_add(mem_ctx, cc_if, chid, cdid, ck, name, name_length); ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ cc_changed(cc_if); ++} ++ ++uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid) ++{ ++ uint32_t uid = 0; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ uid = cc_match_chid(cc_if, chid); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return uid; ++} ++uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid) ++{ ++ uint32_t uid = 0; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ uid = cc_match_cdid(cc_if, cdid); ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ return uid; ++} ++ ++uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id) ++{ ++ uint8_t *ck = NULL; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (cc) { ++ ck = cc->ck; ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return ck; ++ ++} ++ ++uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id) ++{ ++ uint8_t *retval = NULL; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (cc) { ++ retval = cc->chid; ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return retval; ++} ++ ++uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id) ++{ ++ uint8_t *retval = NULL; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ cc = cc_find(cc_if, id); ++ if (cc) { ++ retval = cc->cdid; ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return retval; ++} ++ ++uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length) ++{ ++ uint8_t *retval = NULL; ++ dwc_cc_t *cc; ++ ++ DWC_MUTEX_LOCK(cc_if->mutex); ++ *length = 0; ++ cc = cc_find(cc_if, id); ++ if (cc) { ++ *length = cc->length; ++ retval = cc->name; ++ } ++ DWC_MUTEX_UNLOCK(cc_if->mutex); ++ ++ return retval; ++} ++ ++#endif /* DWC_CCLIB */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_cc.h +@@ -0,0 +1,224 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.h $ ++ * $Revision: #4 $ ++ * $Date: 2010/09/28 $ ++ * $Change: 1596182 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++#ifndef _DWC_CC_H_ ++#define _DWC_CC_H_ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++/** @file ++ * ++ * This file defines the Context Context library. ++ * ++ * The main data structure is dwc_cc_if_t which is returned by either the ++ * dwc_cc_if_alloc function or returned by the module to the user via a provided ++ * function. The data structure is opaque and should only be manipulated via the ++ * functions provied in this API. ++ * ++ * It manages a list of connection contexts and operations can be performed to ++ * add, remove, query, search, and change, those contexts. Additionally, ++ * a dwc_notifier_t object can be requested from the manager so that ++ * the user can be notified whenever the context list has changed. ++ */ ++ ++#include "dwc_os.h" ++#include "dwc_list.h" ++#include "dwc_notifier.h" ++ ++ ++/* Notifications */ ++#define DWC_CC_LIST_CHANGED_NOTIFICATION "DWC_CC_LIST_CHANGED_NOTIFICATION" ++ ++struct dwc_cc_if; ++typedef struct dwc_cc_if dwc_cc_if_t; ++ ++ ++/** @name Connection Context Operations */ ++/** @{ */ ++ ++/** This function allocates memory for a dwc_cc_if_t structure, initializes ++ * fields to default values, and returns a pointer to the structure or NULL on ++ * error. */ ++extern dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx, ++ dwc_notifier_t *notifier, unsigned is_host); ++ ++/** Frees the memory for the specified CC structure allocated from ++ * dwc_cc_if_alloc(). */ ++extern void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if); ++ ++/** Removes all contexts from the connection context list */ ++extern void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if); ++ ++/** Adds a connection context (CHID, CK, CDID, Name) to the connection context list. ++ * If a CHID already exists, the CK and name are overwritten. Statistics are ++ * not overwritten. ++ * ++ * @param cc_if The cc_if structure. ++ * @param chid A pointer to the 16-byte CHID. This value will be copied. ++ * @param ck A pointer to the 16-byte CK. This value will be copied. ++ * @param cdid A pointer to the 16-byte CDID. This value will be copied. ++ * @param name An optional host friendly name as defined in the association model ++ * spec. Must be a UTF16-LE unicode string. Can be NULL to indicated no name. ++ * @param length The length othe unicode string. ++ * @return A unique identifier used to refer to this context that is valid for ++ * as long as this context is still in the list. */ ++extern int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid, ++ uint8_t *cdid, uint8_t *ck, uint8_t *name, ++ uint8_t length); ++ ++/** Changes the CHID, CK, CDID, or Name values of a connection context in the ++ * list, preserving any accumulated statistics. This would typically be called ++ * if the host decideds to change the context with a SET_CONNECTION request. ++ * ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context. ++ * @param chid A pointer to the 16-byte CHID. This value will be copied. NULL ++ * indicates no change. ++ * @param cdid A pointer to the 16-byte CDID. This value will be copied. NULL ++ * indicates no change. ++ * @param ck A pointer to the 16-byte CK. This value will be copied. NULL ++ * indicates no change. ++ * @param name Host friendly name UTF16-LE. NULL indicates no change. ++ * @param length Length of name. */ ++extern void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id, ++ uint8_t *chid, uint8_t *cdid, uint8_t *ck, ++ uint8_t *name, uint8_t length); ++ ++/** Remove the specified connection context. ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context to remove. */ ++extern void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id); ++ ++/** Get a binary block of data for the connection context list and attributes. ++ * This data can be used by the OS specific driver to save the connection ++ * context list into non-volatile memory. ++ * ++ * @param cc_if The cc_if structure. ++ * @param length Return the length of the data buffer. ++ * @return A pointer to the data buffer. The memory for this buffer should be ++ * freed with DWC_FREE() after use. */ ++extern uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if, ++ unsigned int *length); ++ ++/** Restore the connection context list from the binary data that was previously ++ * returned from a call to dwc_cc_data_for_save. This can be used by the OS specific ++ * driver to load a connection context list from non-volatile memory. ++ * ++ * @param cc_if The cc_if structure. ++ * @param data The data bytes as returned from dwc_cc_data_for_save. ++ * @param length The length of the data. */ ++extern void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if, ++ uint8_t *data, unsigned int length); ++ ++/** Find the connection context from the specified CHID. ++ * ++ * @param cc_if The cc_if structure. ++ * @param chid A pointer to the CHID data. ++ * @return A non-zero identifier of the connection context if the CHID matches. ++ * Otherwise returns 0. */ ++extern uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid); ++ ++/** Find the connection context from the specified CDID. ++ * ++ * @param cc_if The cc_if structure. ++ * @param cdid A pointer to the CDID data. ++ * @return A non-zero identifier of the connection context if the CHID matches. ++ * Otherwise returns 0. */ ++extern uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid); ++ ++/** Retrieve the CK from the specified connection context. ++ * ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context. ++ * @return A pointer to the CK data. The memory does not need to be freed. */ ++extern uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id); ++ ++/** Retrieve the CHID from the specified connection context. ++ * ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context. ++ * @return A pointer to the CHID data. The memory does not need to be freed. */ ++extern uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id); ++ ++/** Retrieve the CDID from the specified connection context. ++ * ++ * @param cc_if The cc_if structure. ++ * @param id The identifier of the connection context. ++ * @return A pointer to the CDID data. The memory does not need to be freed. */ ++extern uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id); ++ ++extern uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length); ++ ++/** Checks a buffer for non-zero. ++ * @param id A pointer to a 16 byte buffer. ++ * @return true if the 16 byte value is non-zero. */ ++static inline unsigned dwc_assoc_is_not_zero_id(uint8_t *id) { ++ int i; ++ for (i=0; i<16; i++) { ++ if (id[i]) return 1; ++ } ++ return 0; ++} ++ ++/** Checks a buffer for zero. ++ * @param id A pointer to a 16 byte buffer. ++ * @return true if the 16 byte value is zero. */ ++static inline unsigned dwc_assoc_is_zero_id(uint8_t *id) { ++ return !dwc_assoc_is_not_zero_id(id); ++} ++ ++/** Prints an ASCII representation for the 16-byte chid, cdid, or ck, into ++ * buffer. */ ++static inline int dwc_print_id_string(char *buffer, uint8_t *id) { ++ char *ptr = buffer; ++ int i; ++ for (i=0; i<16; i++) { ++ ptr += DWC_SPRINTF(ptr, "%02x", id[i]); ++ if (i < 15) { ++ ptr += DWC_SPRINTF(ptr, " "); ++ } ++ } ++ return ptr - buffer; ++} ++ ++/** @} */ ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _DWC_CC_H_ */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c +@@ -0,0 +1,1308 @@ ++#include "dwc_os.h" ++#include "dwc_list.h" ++ ++#ifdef DWC_CCLIB ++# include "dwc_cc.h" ++#endif ++ ++#ifdef DWC_CRYPTOLIB ++# include "dwc_modpow.h" ++# include "dwc_dh.h" ++# include "dwc_crypto.h" ++#endif ++ ++#ifdef DWC_NOTIFYLIB ++# include "dwc_notifier.h" ++#endif ++ ++/* OS-Level Implementations */ ++ ++/* This is the FreeBSD 7.0 kernel implementation of the DWC platform library. */ ++ ++ ++/* MISC */ ++ ++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size) ++{ ++ return memset(dest, byte, size); ++} ++ ++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size) ++{ ++ return memcpy(dest, src, size); ++} ++ ++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size) ++{ ++ bcopy(src, dest, size); ++ return dest; ++} ++ ++int DWC_MEMCMP(void *m1, void *m2, uint32_t size) ++{ ++ return memcmp(m1, m2, size); ++} ++ ++int DWC_STRNCMP(void *s1, void *s2, uint32_t size) ++{ ++ return strncmp(s1, s2, size); ++} ++ ++int DWC_STRCMP(void *s1, void *s2) ++{ ++ return strcmp(s1, s2); ++} ++ ++int DWC_STRLEN(char const *str) ++{ ++ return strlen(str); ++} ++ ++char *DWC_STRCPY(char *to, char const *from) ++{ ++ return strcpy(to, from); ++} ++ ++char *DWC_STRDUP(char const *str) ++{ ++ int len = DWC_STRLEN(str) + 1; ++ char *new = DWC_ALLOC_ATOMIC(len); ++ ++ if (!new) { ++ return NULL; ++ } ++ ++ DWC_MEMCPY(new, str, len); ++ return new; ++} ++ ++int DWC_ATOI(char *str, int32_t *value) ++{ ++ char *end = NULL; ++ ++ *value = strtol(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++int DWC_ATOUI(char *str, uint32_t *value) ++{ ++ char *end = NULL; ++ ++ *value = strtoul(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++ ++#ifdef DWC_UTFLIB ++/* From usbstring.c */ ++ ++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len) ++{ ++ int count = 0; ++ u8 c; ++ u16 uchar; ++ ++ /* this insists on correct encodings, though not minimal ones. ++ * BUT it currently rejects legit 4-byte UTF-8 code points, ++ * which need surrogate pairs. (Unicode 3.1 can use them.) ++ */ ++ while (len != 0 && (c = (u8) *s++) != 0) { ++ if (unlikely(c & 0x80)) { ++ // 2-byte sequence: ++ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx ++ if ((c & 0xe0) == 0xc0) { ++ uchar = (c & 0x1f) << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ // 3-byte sequence (most CJKV characters): ++ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx ++ } else if ((c & 0xf0) == 0xe0) { ++ uchar = (c & 0x0f) << 12; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ /* no bogus surrogates */ ++ if (0xd800 <= uchar && uchar <= 0xdfff) ++ goto fail; ++ ++ // 4-byte sequence (surrogate pairs, currently rare): ++ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx ++ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx ++ // (uuuuu = wwww + 1) ++ // FIXME accept the surrogate code points (only) ++ } else ++ goto fail; ++ } else ++ uchar = c; ++ put_unaligned (cpu_to_le16 (uchar), cp++); ++ count++; ++ len--; ++ } ++ return count; ++fail: ++ return -1; ++} ++ ++#endif /* DWC_UTFLIB */ ++ ++ ++/* dwc_debug.h */ ++ ++dwc_bool_t DWC_IN_IRQ(void) ++{ ++// return in_irq(); ++ return 0; ++} ++ ++dwc_bool_t DWC_IN_BH(void) ++{ ++// return in_softirq(); ++ return 0; ++} ++ ++void DWC_VPRINTF(char *format, va_list args) ++{ ++ vprintf(format, args); ++} ++ ++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args) ++{ ++ return vsnprintf(str, size, format, args); ++} ++ ++void DWC_PRINTF(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++int DWC_SPRINTF(char *buffer, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsprintf(buffer, format, args); ++ va_end(args); ++ return retval; ++} ++ ++int DWC_SNPRINTF(char *buffer, int size, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsnprintf(buffer, size, format, args); ++ va_end(args); ++ return retval; ++} ++ ++void __DWC_WARN(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void __DWC_ERROR(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void DWC_EXCEPTION(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++// BUG_ON(1); ??? ++} ++ ++#ifdef DEBUG ++void __DWC_DEBUG(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++#endif ++ ++ ++/* dwc_mem.h */ ++ ++#if 0 ++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, ++ uint32_t align, ++ uint32_t alloc) ++{ ++ struct dma_pool *pool = dma_pool_create("Pool", NULL, ++ size, align, alloc); ++ return (dwc_pool_t *)pool; ++} ++ ++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool) ++{ ++ dma_pool_destroy((struct dma_pool *)pool); ++} ++ ++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++// return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr); ++ return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr); ++} ++ ++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr); ++ memset(..); ++} ++ ++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr) ++{ ++ dma_pool_free(pool, vaddr, daddr); ++} ++#endif ++ ++static void dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) ++{ ++ if (error) ++ return; ++ *(bus_addr_t *)arg = segs[0].ds_addr; ++} ++ ++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) ++{ ++ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; ++ int error; ++ ++ error = bus_dma_tag_create( ++#if __FreeBSD_version >= 700000 ++ bus_get_dma_tag(dma->dev), /* parent */ ++#else ++ NULL, /* parent */ ++#endif ++ 4, 0, /* alignment, bounds */ ++ BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ ++ BUS_SPACE_MAXADDR, /* highaddr */ ++ NULL, NULL, /* filter, filterarg */ ++ size, /* maxsize */ ++ 1, /* nsegments */ ++ size, /* maxsegsize */ ++ 0, /* flags */ ++ NULL, /* lockfunc */ ++ NULL, /* lockarg */ ++ &dma->dma_tag); ++ if (error) { ++ device_printf(dma->dev, "%s: bus_dma_tag_create failed: %d\n", ++ __func__, error); ++ goto fail_0; ++ } ++ ++ error = bus_dmamem_alloc(dma->dma_tag, &dma->dma_vaddr, ++ BUS_DMA_NOWAIT | BUS_DMA_COHERENT, &dma->dma_map); ++ if (error) { ++ device_printf(dma->dev, "%s: bus_dmamem_alloc(%ju) failed: %d\n", ++ __func__, (uintmax_t)size, error); ++ goto fail_1; ++ } ++ ++ dma->dma_paddr = 0; ++ error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr, size, ++ dmamap_cb, &dma->dma_paddr, BUS_DMA_NOWAIT); ++ if (error || dma->dma_paddr == 0) { ++ device_printf(dma->dev, "%s: bus_dmamap_load failed: %d\n", ++ __func__, error); ++ goto fail_2; ++ } ++ ++ *dma_addr = dma->dma_paddr; ++ return dma->dma_vaddr; ++ ++fail_2: ++ bus_dmamap_unload(dma->dma_tag, dma->dma_map); ++fail_1: ++ bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map); ++ bus_dma_tag_destroy(dma->dma_tag); ++fail_0: ++ dma->dma_map = NULL; ++ dma->dma_tag = NULL; ++ ++ return NULL; ++} ++ ++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr) ++{ ++ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; ++ ++ if (dma->dma_tag == NULL) ++ return; ++ if (dma->dma_map != NULL) { ++ bus_dmamap_sync(dma->dma_tag, dma->dma_map, ++ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); ++ bus_dmamap_unload(dma->dma_tag, dma->dma_map); ++ bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map); ++ dma->dma_map = NULL; ++ } ++ ++ bus_dma_tag_destroy(dma->dma_tag); ++ dma->dma_tag = NULL; ++} ++ ++void *__DWC_ALLOC(void *mem_ctx, uint32_t size) ++{ ++ return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO); ++} ++ ++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size) ++{ ++ return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO); ++} ++ ++void __DWC_FREE(void *mem_ctx, void *addr) ++{ ++ free(addr, M_DEVBUF); ++} ++ ++ ++#ifdef DWC_CRYPTOLIB ++/* dwc_crypto.h */ ++ ++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length) ++{ ++ get_random_bytes(buffer, length); ++} ++ ++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out) ++{ ++ struct crypto_blkcipher *tfm; ++ struct blkcipher_desc desc; ++ struct scatterlist sgd; ++ struct scatterlist sgs; ++ ++ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); ++ if (tfm == NULL) { ++ printk("failed to load transform for aes CBC\n"); ++ return -1; ++ } ++ ++ crypto_blkcipher_setkey(tfm, key, keylen); ++ crypto_blkcipher_set_iv(tfm, iv, 16); ++ ++ sg_init_one(&sgd, out, messagelen); ++ sg_init_one(&sgs, message, messagelen); ++ ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) { ++ crypto_free_blkcipher(tfm); ++ DWC_ERROR("AES CBC encryption failed"); ++ return -1; ++ } ++ ++ crypto_free_blkcipher(tfm); ++ return 0; ++} ++ ++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, len); ++ crypto_hash_digest(&desc, &sg, len, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++ ++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, ++ uint8_t *key, uint32_t keylen, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, messagelen); ++ crypto_hash_setkey(tfm, key, keylen); ++ crypto_hash_digest(&desc, &sg, messagelen, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++ ++#endif /* DWC_CRYPTOLIB */ ++ ++ ++/* Byte Ordering Conversions */ ++ ++uint32_t DWC_CPU_TO_LE32(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_CPU_TO_BE32(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_LE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_BE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_LE16(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_BE16(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_LE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_BE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++ ++/* Registers */ ++ ++uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ return bus_space_read_4(io->iot, io->ioh, ior); ++} ++ ++#if 0 ++uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ return bus_space_read_8(io->iot, io->ioh, ior); ++} ++#endif ++ ++void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_4(io->iot, io->ioh, ior, value); ++} ++ ++#if 0 ++void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_8(io->iot, io->ioh, ior, value); ++} ++#endif ++ ++void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, ++ uint32_t set_mask) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_4(io->iot, io->ioh, ior, ++ (bus_space_read_4(io->iot, io->ioh, ior) & ++ ~clear_mask) | set_mask); ++} ++ ++#if 0 ++void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, ++ uint64_t set_mask) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_8(io->iot, io->ioh, ior, ++ (bus_space_read_8(io->iot, io->ioh, ior) & ++ ~clear_mask) | set_mask); ++} ++#endif ++ ++ ++/* Locking */ ++ ++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void) ++{ ++ struct mtx *sl = DWC_ALLOC(sizeof(*sl)); ++ ++ if (!sl) { ++ DWC_ERROR("Cannot allocate memory for spinlock"); ++ return NULL; ++ } ++ ++ mtx_init(sl, "dw3spn", NULL, MTX_SPIN); ++ return (dwc_spinlock_t *)sl; ++} ++ ++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock) ++{ ++ struct mtx *sl = (struct mtx *)lock; ++ ++ mtx_destroy(sl); ++ DWC_FREE(sl); ++} ++ ++void DWC_SPINLOCK(dwc_spinlock_t *lock) ++{ ++ mtx_lock_spin((struct mtx *)lock); // ??? ++} ++ ++void DWC_SPINUNLOCK(dwc_spinlock_t *lock) ++{ ++ mtx_unlock_spin((struct mtx *)lock); // ??? ++} ++ ++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags) ++{ ++ mtx_lock_spin((struct mtx *)lock); ++} ++ ++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags) ++{ ++ mtx_unlock_spin((struct mtx *)lock); ++} ++ ++dwc_mutex_t *DWC_MUTEX_ALLOC(void) ++{ ++ struct mtx *m; ++ dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mtx)); ++ ++ if (!mutex) { ++ DWC_ERROR("Cannot allocate memory for mutex"); ++ return NULL; ++ } ++ ++ m = (struct mtx *)mutex; ++ mtx_init(m, "dw3mtx", NULL, MTX_DEF); ++ return mutex; ++} ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++#else ++void DWC_MUTEX_FREE(dwc_mutex_t *mutex) ++{ ++ mtx_destroy((struct mtx *)mutex); ++ DWC_FREE(mutex); ++} ++#endif ++ ++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex) ++{ ++ struct mtx *m = (struct mtx *)mutex; ++ ++ mtx_lock(m); ++} ++ ++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex) ++{ ++ struct mtx *m = (struct mtx *)mutex; ++ ++ return mtx_trylock(m); ++} ++ ++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex) ++{ ++ struct mtx *m = (struct mtx *)mutex; ++ ++ mtx_unlock(m); ++} ++ ++ ++/* Timing */ ++ ++void DWC_UDELAY(uint32_t usecs) ++{ ++ DELAY(usecs); ++} ++ ++void DWC_MDELAY(uint32_t msecs) ++{ ++ do { ++ DELAY(1000); ++ } while (--msecs); ++} ++ ++void DWC_MSLEEP(uint32_t msecs) ++{ ++ struct timeval tv; ++ ++ tv.tv_sec = msecs / 1000; ++ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; ++ pause("dw3slp", tvtohz(&tv)); ++} ++ ++uint32_t DWC_TIME(void) ++{ ++ struct timeval tv; ++ ++ microuptime(&tv); // or getmicrouptime? (less precise, but faster) ++ return tv.tv_sec * 1000 + tv.tv_usec / 1000; ++} ++ ++ ++/* Timers */ ++ ++struct dwc_timer { ++ struct callout t; ++ char *name; ++ dwc_spinlock_t *lock; ++ dwc_timer_callback_t cb; ++ void *data; ++}; ++ ++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data) ++{ ++ dwc_timer_t *t = DWC_ALLOC(sizeof(*t)); ++ ++ if (!t) { ++ DWC_ERROR("Cannot allocate memory for timer"); ++ return NULL; ++ } ++ ++ callout_init(&t->t, 1); ++ ++ t->name = DWC_STRDUP(name); ++ if (!t->name) { ++ DWC_ERROR("Cannot allocate memory for timer->name"); ++ goto no_name; ++ } ++ ++ t->lock = DWC_SPINLOCK_ALLOC(); ++ if (!t->lock) { ++ DWC_ERROR("Cannot allocate memory for lock"); ++ goto no_lock; ++ } ++ ++ t->cb = cb; ++ t->data = data; ++ ++ return t; ++ ++ no_lock: ++ DWC_FREE(t->name); ++ no_name: ++ DWC_FREE(t); ++ ++ return NULL; ++} ++ ++void DWC_TIMER_FREE(dwc_timer_t *timer) ++{ ++ callout_stop(&timer->t); ++ DWC_SPINLOCK_FREE(timer->lock); ++ DWC_FREE(timer->name); ++ DWC_FREE(timer); ++} ++ ++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time) ++{ ++ struct timeval tv; ++ ++ tv.tv_sec = time / 1000; ++ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; ++ callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data); ++} ++ ++void DWC_TIMER_CANCEL(dwc_timer_t *timer) ++{ ++ callout_stop(&timer->t); ++} ++ ++ ++/* Wait Queues */ ++ ++struct dwc_waitq { ++ struct mtx lock; ++ int abort; ++}; ++ ++dwc_waitq_t *DWC_WAITQ_ALLOC(void) ++{ ++ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ DWC_ERROR("Cannot allocate memory for waitqueue"); ++ return NULL; ++ } ++ ++ mtx_init(&wq->lock, "dw3wtq", NULL, MTX_DEF); ++ wq->abort = 0; ++ ++ return wq; ++} ++ ++void DWC_WAITQ_FREE(dwc_waitq_t *wq) ++{ ++ mtx_destroy(&wq->lock); ++ DWC_FREE(wq); ++} ++ ++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data) ++{ ++// intrmask_t ipl; ++ int result = 0; ++ ++ mtx_lock(&wq->lock); ++// ipl = splbio(); ++ ++ /* Skip the sleep if already aborted or triggered */ ++ if (!wq->abort && !cond(data)) { ++// splx(ipl); ++ result = msleep(wq, &wq->lock, PCATCH, "dw3wat", 0); // infinite timeout ++// ipl = splbio(); ++ } ++ ++ if (result == ERESTART) { // signaled - restart ++ result = -DWC_E_RESTART; ++ ++ } else if (result == EINTR) { // signaled - interrupt ++ result = -DWC_E_ABORT; ++ ++ } else if (wq->abort) { ++ result = -DWC_E_ABORT; ++ ++ } else { ++ result = 0; ++ } ++ ++ wq->abort = 0; ++// splx(ipl); ++ mtx_unlock(&wq->lock); ++ return result; ++} ++ ++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, ++ void *data, int32_t msecs) ++{ ++ struct timeval tv, tv1, tv2; ++// intrmask_t ipl; ++ int result = 0; ++ ++ tv.tv_sec = msecs / 1000; ++ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; ++ ++ mtx_lock(&wq->lock); ++// ipl = splbio(); ++ ++ /* Skip the sleep if already aborted or triggered */ ++ if (!wq->abort && !cond(data)) { ++// splx(ipl); ++ getmicrouptime(&tv1); ++ result = msleep(wq, &wq->lock, PCATCH, "dw3wto", tvtohz(&tv)); ++ getmicrouptime(&tv2); ++// ipl = splbio(); ++ } ++ ++ if (result == 0) { // awoken ++ if (wq->abort) { ++ result = -DWC_E_ABORT; ++ } else { ++ tv2.tv_usec -= tv1.tv_usec; ++ if (tv2.tv_usec < 0) { ++ tv2.tv_usec += 1000000; ++ tv2.tv_sec--; ++ } ++ ++ tv2.tv_sec -= tv1.tv_sec; ++ result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000; ++ result = msecs - result; ++ if (result <= 0) ++ result = 1; ++ } ++ } else if (result == ERESTART) { // signaled - restart ++ result = -DWC_E_RESTART; ++ ++ } else if (result == EINTR) { // signaled - interrupt ++ result = -DWC_E_ABORT; ++ ++ } else { // timed out ++ result = -DWC_E_TIMEOUT; ++ } ++ ++ wq->abort = 0; ++// splx(ipl); ++ mtx_unlock(&wq->lock); ++ return result; ++} ++ ++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq) ++{ ++ wakeup(wq); ++} ++ ++void DWC_WAITQ_ABORT(dwc_waitq_t *wq) ++{ ++// intrmask_t ipl; ++ ++ mtx_lock(&wq->lock); ++// ipl = splbio(); ++ wq->abort = 1; ++ wakeup(wq); ++// splx(ipl); ++ mtx_unlock(&wq->lock); ++} ++ ++ ++/* Threading */ ++ ++struct dwc_thread { ++ struct proc *proc; ++ int abort; ++}; ++ ++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data) ++{ ++ int retval; ++ dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread)); ++ ++ if (!thread) { ++ return NULL; ++ } ++ ++ thread->abort = 0; ++ retval = kthread_create((void (*)(void *))func, data, &thread->proc, ++ RFPROC | RFNOWAIT, 0, "%s", name); ++ if (retval) { ++ DWC_FREE(thread); ++ return NULL; ++ } ++ ++ return thread; ++} ++ ++int DWC_THREAD_STOP(dwc_thread_t *thread) ++{ ++ int retval; ++ ++ thread->abort = 1; ++ retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz); ++ ++ if (retval == 0) { ++ /* DWC_THREAD_EXIT() will free the thread struct */ ++ return 0; ++ } ++ ++ /* NOTE: We leak the thread struct if thread doesn't die */ ++ ++ if (retval == EWOULDBLOCK) { ++ return -DWC_E_TIMEOUT; ++ } ++ ++ return -DWC_E_UNKNOWN; ++} ++ ++dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread) ++{ ++ return thread->abort; ++} ++ ++void DWC_THREAD_EXIT(dwc_thread_t *thread) ++{ ++ wakeup(&thread->abort); ++ DWC_FREE(thread); ++ kthread_exit(0); ++} ++ ++ ++/* tasklets ++ - Runs in interrupt context (cannot sleep) ++ - Each tasklet runs on a single CPU [ How can we ensure this on FreeBSD? Does it matter? ] ++ - Different tasklets can be running simultaneously on different CPUs [ shouldn't matter ] ++ */ ++struct dwc_tasklet { ++ struct task t; ++ dwc_tasklet_callback_t cb; ++ void *data; ++}; ++ ++static void tasklet_callback(void *data, int pending) // what to do with pending ??? ++{ ++ dwc_tasklet_t *task = (dwc_tasklet_t *)data; ++ ++ task->cb(task->data); ++} ++ ++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data) ++{ ++ dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task)); ++ ++ if (task) { ++ task->cb = cb; ++ task->data = data; ++ TASK_INIT(&task->t, 0, tasklet_callback, task); ++ } else { ++ DWC_ERROR("Cannot allocate memory for tasklet"); ++ } ++ ++ return task; ++} ++ ++void DWC_TASK_FREE(dwc_tasklet_t *task) ++{ ++ taskqueue_drain(taskqueue_fast, &task->t); // ??? ++ DWC_FREE(task); ++} ++ ++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task) ++{ ++ /* Uses predefined system queue */ ++ taskqueue_enqueue_fast(taskqueue_fast, &task->t); ++} ++ ++ ++/* workqueues ++ - Runs in process context (can sleep) ++ */ ++typedef struct work_container { ++ dwc_work_callback_t cb; ++ void *data; ++ dwc_workq_t *wq; ++ char *name; ++ int hz; ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_ENTRY(work_container) entry; ++#endif ++ struct task task; ++} work_container_t; ++ ++#ifdef DEBUG ++DWC_CIRCLEQ_HEAD(work_container_queue, work_container); ++#endif ++ ++struct dwc_workq { ++ struct taskqueue *taskq; ++ dwc_spinlock_t *lock; ++ dwc_waitq_t *waitq; ++ int pending; ++ ++#ifdef DEBUG ++ struct work_container_queue entries; ++#endif ++}; ++ ++static void do_work(void *data, int pending) // what to do with pending ??? ++{ ++ work_container_t *container = (work_container_t *)data; ++ dwc_workq_t *wq = container->wq; ++ dwc_irqflags_t flags; ++ ++ if (container->hz) { ++ pause("dw3wrk", container->hz); ++ } ++ ++ container->cb(container->data); ++ DWC_DEBUG("Work done: %s, container=%p", container->name, container); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry); ++#endif ++ if (container->name) ++ DWC_FREE(container->name); ++ DWC_FREE(container); ++ wq->pending--; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++} ++ ++static int work_done(void *data) ++{ ++ dwc_workq_t *workq = (dwc_workq_t *)data; ++ ++ return workq->pending == 0; ++} ++ ++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout) ++{ ++ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout); ++} ++ ++dwc_workq_t *DWC_WORKQ_ALLOC(char *name) ++{ ++ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ DWC_ERROR("Cannot allocate memory for workqueue"); ++ return NULL; ++ } ++ ++ wq->taskq = taskqueue_create(name, M_NOWAIT, taskqueue_thread_enqueue, &wq->taskq); ++ if (!wq->taskq) { ++ DWC_ERROR("Cannot allocate memory for taskqueue"); ++ goto no_taskq; ++ } ++ ++ wq->pending = 0; ++ ++ wq->lock = DWC_SPINLOCK_ALLOC(); ++ if (!wq->lock) { ++ DWC_ERROR("Cannot allocate memory for spinlock"); ++ goto no_lock; ++ } ++ ++ wq->waitq = DWC_WAITQ_ALLOC(); ++ if (!wq->waitq) { ++ DWC_ERROR("Cannot allocate memory for waitqueue"); ++ goto no_waitq; ++ } ++ ++ taskqueue_start_threads(&wq->taskq, 1, PWAIT, "%s taskq", "dw3tsk"); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INIT(&wq->entries); ++#endif ++ return wq; ++ ++ no_waitq: ++ DWC_SPINLOCK_FREE(wq->lock); ++ no_lock: ++ taskqueue_free(wq->taskq); ++ no_taskq: ++ DWC_FREE(wq); ++ ++ return NULL; ++} ++ ++void DWC_WORKQ_FREE(dwc_workq_t *wq) ++{ ++#ifdef DEBUG ++ dwc_irqflags_t flags; ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ ++ if (wq->pending != 0) { ++ struct work_container *container; ++ ++ DWC_ERROR("Destroying work queue with pending work"); ++ ++ DWC_CIRCLEQ_FOREACH(container, &wq->entries, entry) { ++ DWC_ERROR("Work %s still pending", container->name); ++ } ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++#endif ++ DWC_WAITQ_FREE(wq->waitq); ++ DWC_SPINLOCK_FREE(wq->lock); ++ taskqueue_free(wq->taskq); ++ DWC_FREE(wq); ++} ++ ++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data, ++ char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ container->hz = 0; ++ ++ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); ++ ++ TASK_INIT(&container->task, 0, do_work, container); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); ++#endif ++ taskqueue_enqueue_fast(wq->taskq, &container->task); ++} ++ ++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb, ++ void *data, uint32_t time, char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ struct timeval tv; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ ++ tv.tv_sec = time / 1000; ++ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; ++ container->hz = tvtohz(&tv); ++ ++ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); ++ ++ TASK_INIT(&container->task, 0, do_work, container); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); ++#endif ++ taskqueue_enqueue_fast(wq->taskq, &container->task); ++} ++ ++int DWC_WORKQ_PENDING(dwc_workq_t *wq) ++{ ++ return wq->pending; ++} +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_common_linux.c +@@ -0,0 +1,1418 @@ ++#include ++#include ++#include ++#include ++ ++#ifdef DWC_CCLIB ++# include "dwc_cc.h" ++#endif ++ ++#ifdef DWC_CRYPTOLIB ++# include "dwc_modpow.h" ++# include "dwc_dh.h" ++# include "dwc_crypto.h" ++#endif ++ ++#ifdef DWC_NOTIFYLIB ++# include "dwc_notifier.h" ++#endif ++ ++/* OS-Level Implementations */ ++ ++/* This is the Linux kernel implementation of the DWC platform library. */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) ++# include ++#else ++# include ++#endif ++ ++#include ++#include ++#include ++#include ++ ++#include "dwc_os.h" ++#include "dwc_list.h" ++ ++ ++/* MISC */ ++ ++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size) ++{ ++ return memset(dest, byte, size); ++} ++ ++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size) ++{ ++ return memcpy(dest, src, size); ++} ++ ++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size) ++{ ++ return memmove(dest, src, size); ++} ++ ++int DWC_MEMCMP(void *m1, void *m2, uint32_t size) ++{ ++ return memcmp(m1, m2, size); ++} ++ ++int DWC_STRNCMP(void *s1, void *s2, uint32_t size) ++{ ++ return strncmp(s1, s2, size); ++} ++ ++int DWC_STRCMP(void *s1, void *s2) ++{ ++ return strcmp(s1, s2); ++} ++ ++int DWC_STRLEN(char const *str) ++{ ++ return strlen(str); ++} ++ ++char *DWC_STRCPY(char *to, char const *from) ++{ ++ return strcpy(to, from); ++} ++ ++char *DWC_STRDUP(char const *str) ++{ ++ int len = DWC_STRLEN(str) + 1; ++ char *new = DWC_ALLOC_ATOMIC(len); ++ ++ if (!new) { ++ return NULL; ++ } ++ ++ DWC_MEMCPY(new, str, len); ++ return new; ++} ++ ++int DWC_ATOI(const char *str, int32_t *value) ++{ ++ char *end = NULL; ++ ++ *value = simple_strtol(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++int DWC_ATOUI(const char *str, uint32_t *value) ++{ ++ char *end = NULL; ++ ++ *value = simple_strtoul(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++ ++#ifdef DWC_UTFLIB ++/* From usbstring.c */ ++ ++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len) ++{ ++ int count = 0; ++ u8 c; ++ u16 uchar; ++ ++ /* this insists on correct encodings, though not minimal ones. ++ * BUT it currently rejects legit 4-byte UTF-8 code points, ++ * which need surrogate pairs. (Unicode 3.1 can use them.) ++ */ ++ while (len != 0 && (c = (u8) *s++) != 0) { ++ if (unlikely(c & 0x80)) { ++ // 2-byte sequence: ++ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx ++ if ((c & 0xe0) == 0xc0) { ++ uchar = (c & 0x1f) << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ // 3-byte sequence (most CJKV characters): ++ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx ++ } else if ((c & 0xf0) == 0xe0) { ++ uchar = (c & 0x0f) << 12; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ /* no bogus surrogates */ ++ if (0xd800 <= uchar && uchar <= 0xdfff) ++ goto fail; ++ ++ // 4-byte sequence (surrogate pairs, currently rare): ++ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx ++ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx ++ // (uuuuu = wwww + 1) ++ // FIXME accept the surrogate code points (only) ++ } else ++ goto fail; ++ } else ++ uchar = c; ++ put_unaligned (cpu_to_le16 (uchar), cp++); ++ count++; ++ len--; ++ } ++ return count; ++fail: ++ return -1; ++} ++#endif /* DWC_UTFLIB */ ++ ++ ++/* dwc_debug.h */ ++ ++dwc_bool_t DWC_IN_IRQ(void) ++{ ++ return in_irq(); ++} ++ ++dwc_bool_t DWC_IN_BH(void) ++{ ++ return in_softirq(); ++} ++ ++void DWC_VPRINTF(char *format, va_list args) ++{ ++ vprintk(format, args); ++} ++ ++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args) ++{ ++ return vsnprintf(str, size, format, args); ++} ++ ++void DWC_PRINTF(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++int DWC_SPRINTF(char *buffer, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsprintf(buffer, format, args); ++ va_end(args); ++ return retval; ++} ++ ++int DWC_SNPRINTF(char *buffer, int size, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsnprintf(buffer, size, format, args); ++ va_end(args); ++ return retval; ++} ++ ++void __DWC_WARN(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_PRINTF(KERN_WARNING); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void __DWC_ERROR(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_PRINTF(KERN_ERR); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void DWC_EXCEPTION(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_PRINTF(KERN_ERR); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++ BUG_ON(1); ++} ++ ++#ifdef DEBUG ++void __DWC_DEBUG(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_PRINTF(KERN_DEBUG); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++#endif ++ ++ ++/* dwc_mem.h */ ++ ++#if 0 ++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, ++ uint32_t align, ++ uint32_t alloc) ++{ ++ struct dma_pool *pool = dma_pool_create("Pool", NULL, ++ size, align, alloc); ++ return (dwc_pool_t *)pool; ++} ++ ++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool) ++{ ++ dma_pool_destroy((struct dma_pool *)pool); ++} ++ ++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++ return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr); ++} ++ ++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr); ++ memset(..); ++} ++ ++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr) ++{ ++ dma_pool_free(pool, vaddr, daddr); ++} ++#endif ++ ++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) ++{ ++ return dma_zalloc_coherent(dma_ctx, size, dma_addr, GFP_KERNEL | GFP_DMA32); ++} ++ ++void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) ++{ ++ return dma_zalloc_coherent(dma_ctx, size, dma_addr, GFP_ATOMIC); ++} ++ ++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr) ++{ ++ dma_free_coherent(dma_ctx, size, virt_addr, dma_addr); ++} ++ ++void *__DWC_ALLOC(void *mem_ctx, uint32_t size) ++{ ++ return kzalloc(size, GFP_KERNEL); ++} ++ ++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size) ++{ ++ return kzalloc(size, GFP_ATOMIC); ++} ++ ++void __DWC_FREE(void *mem_ctx, void *addr) ++{ ++ kfree(addr); ++} ++ ++ ++#ifdef DWC_CRYPTOLIB ++/* dwc_crypto.h */ ++ ++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length) ++{ ++ get_random_bytes(buffer, length); ++} ++ ++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out) ++{ ++ struct crypto_blkcipher *tfm; ++ struct blkcipher_desc desc; ++ struct scatterlist sgd; ++ struct scatterlist sgs; ++ ++ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); ++ if (tfm == NULL) { ++ printk("failed to load transform for aes CBC\n"); ++ return -1; ++ } ++ ++ crypto_blkcipher_setkey(tfm, key, keylen); ++ crypto_blkcipher_set_iv(tfm, iv, 16); ++ ++ sg_init_one(&sgd, out, messagelen); ++ sg_init_one(&sgs, message, messagelen); ++ ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) { ++ crypto_free_blkcipher(tfm); ++ DWC_ERROR("AES CBC encryption failed"); ++ return -1; ++ } ++ ++ crypto_free_blkcipher(tfm); ++ return 0; ++} ++ ++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for sha256: %ld\n", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, len); ++ crypto_hash_digest(&desc, &sg, len, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++ ++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, ++ uint8_t *key, uint32_t keylen, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for hmac(sha256): %ld\n", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, messagelen); ++ crypto_hash_setkey(tfm, key, keylen); ++ crypto_hash_digest(&desc, &sg, messagelen, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++#endif /* DWC_CRYPTOLIB */ ++ ++ ++/* Byte Ordering Conversions */ ++ ++uint32_t DWC_CPU_TO_LE32(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_CPU_TO_BE32(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_LE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_BE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_LE16(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_BE16(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_LE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_BE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++ ++/* Registers */ ++ ++uint32_t DWC_READ_REG32(uint32_t volatile *reg) ++{ ++ return readl(reg); ++} ++ ++#if 0 ++uint64_t DWC_READ_REG64(uint64_t volatile *reg) ++{ ++} ++#endif ++ ++void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value) ++{ ++ writel(value, reg); ++} ++ ++#if 0 ++void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value) ++{ ++} ++#endif ++ ++void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask) ++{ ++ writel((readl(reg) & ~clear_mask) | set_mask, reg); ++} ++ ++#if 0 ++void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask) ++{ ++} ++#endif ++ ++ ++/* Locking */ ++ ++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void) ++{ ++ spinlock_t *sl = (spinlock_t *)1; ++ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ sl = DWC_ALLOC(sizeof(*sl)); ++ if (!sl) { ++ DWC_ERROR("Cannot allocate memory for spinlock\n"); ++ return NULL; ++ } ++ ++ spin_lock_init(sl); ++#endif ++ return (dwc_spinlock_t *)sl; ++} ++ ++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock) ++{ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ DWC_FREE(lock); ++#endif ++} ++ ++void DWC_SPINLOCK(dwc_spinlock_t *lock) ++{ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ spin_lock((spinlock_t *)lock); ++#endif ++} ++ ++void DWC_SPINUNLOCK(dwc_spinlock_t *lock) ++{ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ spin_unlock((spinlock_t *)lock); ++#endif ++} ++ ++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags) ++{ ++ dwc_irqflags_t f; ++ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ spin_lock_irqsave((spinlock_t *)lock, f); ++#else ++ local_irq_save(f); ++#endif ++ *flags = f; ++} ++ ++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags) ++{ ++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) ++ spin_unlock_irqrestore((spinlock_t *)lock, flags); ++#else ++ local_irq_restore(flags); ++#endif ++} ++ ++dwc_mutex_t *DWC_MUTEX_ALLOC(void) ++{ ++ struct mutex *m; ++ dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex)); ++ ++ if (!mutex) { ++ DWC_ERROR("Cannot allocate memory for mutex\n"); ++ return NULL; ++ } ++ ++ m = (struct mutex *)mutex; ++ mutex_init(m); ++ return mutex; ++} ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++#else ++void DWC_MUTEX_FREE(dwc_mutex_t *mutex) ++{ ++ mutex_destroy((struct mutex *)mutex); ++ DWC_FREE(mutex); ++} ++#endif ++ ++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex) ++{ ++ struct mutex *m = (struct mutex *)mutex; ++ mutex_lock(m); ++} ++ ++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex) ++{ ++ struct mutex *m = (struct mutex *)mutex; ++ return mutex_trylock(m); ++} ++ ++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex) ++{ ++ struct mutex *m = (struct mutex *)mutex; ++ mutex_unlock(m); ++} ++ ++ ++/* Timing */ ++ ++void DWC_UDELAY(uint32_t usecs) ++{ ++ udelay(usecs); ++} ++ ++void DWC_MDELAY(uint32_t msecs) ++{ ++ mdelay(msecs); ++} ++ ++void DWC_MSLEEP(uint32_t msecs) ++{ ++ msleep(msecs); ++} ++ ++uint32_t DWC_TIME(void) ++{ ++ return jiffies_to_msecs(jiffies); ++} ++ ++ ++/* Timers */ ++ ++struct dwc_timer { ++ struct timer_list *t; ++ char *name; ++ dwc_timer_callback_t cb; ++ void *data; ++ uint8_t scheduled; ++ dwc_spinlock_t *lock; ++}; ++ ++static void timer_callback(unsigned long data) ++{ ++ dwc_timer_t *timer = (dwc_timer_t *)data; ++ dwc_irqflags_t flags; ++ ++ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags); ++ timer->scheduled = 0; ++ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags); ++ DWC_DEBUGC("Timer %s callback", timer->name); ++ timer->cb(timer->data); ++} ++ ++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data) ++{ ++ dwc_timer_t *t = DWC_ALLOC(sizeof(*t)); ++ ++ if (!t) { ++ DWC_ERROR("Cannot allocate memory for timer"); ++ return NULL; ++ } ++ ++ t->t = DWC_ALLOC(sizeof(*t->t)); ++ if (!t->t) { ++ DWC_ERROR("Cannot allocate memory for timer->t"); ++ goto no_timer; ++ } ++ ++ t->name = DWC_STRDUP(name); ++ if (!t->name) { ++ DWC_ERROR("Cannot allocate memory for timer->name"); ++ goto no_name; ++ } ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK)) ++ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(t->lock); ++#else ++ t->lock = DWC_SPINLOCK_ALLOC(); ++#endif ++ if (!t->lock) { ++ DWC_ERROR("Cannot allocate memory for lock"); ++ goto no_lock; ++ } ++ ++ t->scheduled = 0; ++ t->t->expires = jiffies; ++ setup_timer(t->t, timer_callback, (unsigned long)t); ++ ++ t->cb = cb; ++ t->data = data; ++ ++ return t; ++ ++ no_lock: ++ DWC_FREE(t->name); ++ no_name: ++ DWC_FREE(t->t); ++ no_timer: ++ DWC_FREE(t); ++ return NULL; ++} ++ ++void DWC_TIMER_FREE(dwc_timer_t *timer) ++{ ++ dwc_irqflags_t flags; ++ ++ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags); ++ ++ if (timer->scheduled) { ++ del_timer(timer->t); ++ timer->scheduled = 0; ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags); ++ DWC_SPINLOCK_FREE(timer->lock); ++ DWC_FREE(timer->t); ++ DWC_FREE(timer->name); ++ DWC_FREE(timer); ++} ++ ++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time) ++{ ++ dwc_irqflags_t flags; ++ ++ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags); ++ ++ if (!timer->scheduled) { ++ timer->scheduled = 1; ++ DWC_DEBUGC("Scheduling timer %s to expire in +%d msec", timer->name, time); ++ timer->t->expires = jiffies + msecs_to_jiffies(time); ++ add_timer(timer->t); ++ } else { ++ DWC_DEBUGC("Modifying timer %s to expire in +%d msec", timer->name, time); ++ mod_timer(timer->t, jiffies + msecs_to_jiffies(time)); ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags); ++} ++ ++void DWC_TIMER_CANCEL(dwc_timer_t *timer) ++{ ++ del_timer(timer->t); ++} ++ ++ ++/* Wait Queues */ ++ ++struct dwc_waitq { ++ wait_queue_head_t queue; ++ int abort; ++}; ++ ++dwc_waitq_t *DWC_WAITQ_ALLOC(void) ++{ ++ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ DWC_ERROR("Cannot allocate memory for waitqueue\n"); ++ return NULL; ++ } ++ ++ init_waitqueue_head(&wq->queue); ++ wq->abort = 0; ++ return wq; ++} ++ ++void DWC_WAITQ_FREE(dwc_waitq_t *wq) ++{ ++ DWC_FREE(wq); ++} ++ ++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data) ++{ ++ int result = wait_event_interruptible(wq->queue, ++ cond(data) || wq->abort); ++ if (result == -ERESTARTSYS) { ++ wq->abort = 0; ++ return -DWC_E_RESTART; ++ } ++ ++ if (wq->abort == 1) { ++ wq->abort = 0; ++ return -DWC_E_ABORT; ++ } ++ ++ wq->abort = 0; ++ ++ if (result == 0) { ++ return 0; ++ } ++ ++ return -DWC_E_UNKNOWN; ++} ++ ++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, ++ void *data, int32_t msecs) ++{ ++ int32_t tmsecs; ++ int result = wait_event_interruptible_timeout(wq->queue, ++ cond(data) || wq->abort, ++ msecs_to_jiffies(msecs)); ++ if (result == -ERESTARTSYS) { ++ wq->abort = 0; ++ return -DWC_E_RESTART; ++ } ++ ++ if (wq->abort == 1) { ++ wq->abort = 0; ++ return -DWC_E_ABORT; ++ } ++ ++ wq->abort = 0; ++ ++ if (result > 0) { ++ tmsecs = jiffies_to_msecs(result); ++ if (!tmsecs) { ++ return 1; ++ } ++ ++ return tmsecs; ++ } ++ ++ if (result == 0) { ++ return -DWC_E_TIMEOUT; ++ } ++ ++ return -DWC_E_UNKNOWN; ++} ++ ++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq) ++{ ++ wq->abort = 0; ++ wake_up_interruptible(&wq->queue); ++} ++ ++void DWC_WAITQ_ABORT(dwc_waitq_t *wq) ++{ ++ wq->abort = 1; ++ wake_up_interruptible(&wq->queue); ++} ++ ++ ++/* Threading */ ++ ++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data) ++{ ++ struct task_struct *thread = kthread_run(func, data, name); ++ ++ if (thread == ERR_PTR(-ENOMEM)) { ++ return NULL; ++ } ++ ++ return (dwc_thread_t *)thread; ++} ++ ++int DWC_THREAD_STOP(dwc_thread_t *thread) ++{ ++ return kthread_stop((struct task_struct *)thread); ++} ++ ++dwc_bool_t DWC_THREAD_SHOULD_STOP(void) ++{ ++ return kthread_should_stop(); ++} ++ ++ ++/* tasklets ++ - run in interrupt context (cannot sleep) ++ - each tasklet runs on a single CPU ++ - different tasklets can be running simultaneously on different CPUs ++ */ ++struct dwc_tasklet { ++ struct tasklet_struct t; ++ dwc_tasklet_callback_t cb; ++ void *data; ++}; ++ ++static void tasklet_callback(unsigned long data) ++{ ++ dwc_tasklet_t *t = (dwc_tasklet_t *)data; ++ t->cb(t->data); ++} ++ ++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data) ++{ ++ dwc_tasklet_t *t = DWC_ALLOC(sizeof(*t)); ++ ++ if (t) { ++ t->cb = cb; ++ t->data = data; ++ tasklet_init(&t->t, tasklet_callback, (unsigned long)t); ++ } else { ++ DWC_ERROR("Cannot allocate memory for tasklet\n"); ++ } ++ ++ return t; ++} ++ ++void DWC_TASK_FREE(dwc_tasklet_t *task) ++{ ++ DWC_FREE(task); ++} ++ ++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task) ++{ ++ tasklet_schedule(&task->t); ++} ++ ++void DWC_TASK_HI_SCHEDULE(dwc_tasklet_t *task) ++{ ++ tasklet_hi_schedule(&task->t); ++} ++ ++ ++/* workqueues ++ - run in process context (can sleep) ++ */ ++typedef struct work_container { ++ dwc_work_callback_t cb; ++ void *data; ++ dwc_workq_t *wq; ++ char *name; ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_ENTRY(work_container) entry; ++#endif ++ struct delayed_work work; ++} work_container_t; ++ ++#ifdef DEBUG ++DWC_CIRCLEQ_HEAD(work_container_queue, work_container); ++#endif ++ ++struct dwc_workq { ++ struct workqueue_struct *wq; ++ dwc_spinlock_t *lock; ++ dwc_waitq_t *waitq; ++ int pending; ++ ++#ifdef DEBUG ++ struct work_container_queue entries; ++#endif ++}; ++ ++static void do_work(struct work_struct *work) ++{ ++ dwc_irqflags_t flags; ++ struct delayed_work *dw = container_of(work, struct delayed_work, work); ++ work_container_t *container = container_of(dw, struct work_container, work); ++ dwc_workq_t *wq = container->wq; ++ ++ container->cb(container->data); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry); ++#endif ++ DWC_DEBUGC("Work done: %s, container=%p", container->name, container); ++ if (container->name) { ++ DWC_FREE(container->name); ++ } ++ DWC_FREE(container); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending--; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++} ++ ++static int work_done(void *data) ++{ ++ dwc_workq_t *workq = (dwc_workq_t *)data; ++ return workq->pending == 0; ++} ++ ++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout) ++{ ++ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout); ++} ++ ++dwc_workq_t *DWC_WORKQ_ALLOC(char *name) ++{ ++ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ return NULL; ++ } ++ ++ wq->wq = create_singlethread_workqueue(name); ++ if (!wq->wq) { ++ goto no_wq; ++ } ++ ++ wq->pending = 0; ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK)) ++ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(wq->lock); ++#else ++ wq->lock = DWC_SPINLOCK_ALLOC(); ++#endif ++ if (!wq->lock) { ++ goto no_lock; ++ } ++ ++ wq->waitq = DWC_WAITQ_ALLOC(); ++ if (!wq->waitq) { ++ goto no_waitq; ++ } ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INIT(&wq->entries); ++#endif ++ return wq; ++ ++ no_waitq: ++ DWC_SPINLOCK_FREE(wq->lock); ++ no_lock: ++ destroy_workqueue(wq->wq); ++ no_wq: ++ DWC_FREE(wq); ++ ++ return NULL; ++} ++ ++void DWC_WORKQ_FREE(dwc_workq_t *wq) ++{ ++#ifdef DEBUG ++ if (wq->pending != 0) { ++ struct work_container *wc; ++ DWC_ERROR("Destroying work queue with pending work"); ++ DWC_CIRCLEQ_FOREACH(wc, &wq->entries, entry) { ++ DWC_ERROR("Work %s still pending", wc->name); ++ } ++ } ++#endif ++ destroy_workqueue(wq->wq); ++ DWC_SPINLOCK_FREE(wq->lock); ++ DWC_WAITQ_FREE(wq->waitq); ++ DWC_FREE(wq); ++} ++ ++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data, ++ char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container\n"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name\n"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container); ++ INIT_WORK(&container->work.work, do_work); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); ++#endif ++ queue_work(wq->wq, &container->work.work); ++} ++ ++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb, ++ void *data, uint32_t time, char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container\n"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name\n"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container); ++ INIT_DELAYED_WORK(&container->work, do_work); ++ ++#ifdef DEBUG ++ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); ++#endif ++ queue_delayed_work(wq->wq, &container->work, msecs_to_jiffies(time)); ++} ++ ++int DWC_WORKQ_PENDING(dwc_workq_t *wq) ++{ ++ return wq->pending; ++} ++ ++ ++#ifdef DWC_LIBMODULE ++ ++#ifdef DWC_CCLIB ++/* CC */ ++EXPORT_SYMBOL(dwc_cc_if_alloc); ++EXPORT_SYMBOL(dwc_cc_if_free); ++EXPORT_SYMBOL(dwc_cc_clear); ++EXPORT_SYMBOL(dwc_cc_add); ++EXPORT_SYMBOL(dwc_cc_remove); ++EXPORT_SYMBOL(dwc_cc_change); ++EXPORT_SYMBOL(dwc_cc_data_for_save); ++EXPORT_SYMBOL(dwc_cc_restore_from_data); ++EXPORT_SYMBOL(dwc_cc_match_chid); ++EXPORT_SYMBOL(dwc_cc_match_cdid); ++EXPORT_SYMBOL(dwc_cc_ck); ++EXPORT_SYMBOL(dwc_cc_chid); ++EXPORT_SYMBOL(dwc_cc_cdid); ++EXPORT_SYMBOL(dwc_cc_name); ++#endif /* DWC_CCLIB */ ++ ++#ifdef DWC_CRYPTOLIB ++# ifndef CONFIG_MACH_IPMATE ++/* Modpow */ ++EXPORT_SYMBOL(dwc_modpow); ++ ++/* DH */ ++EXPORT_SYMBOL(dwc_dh_modpow); ++EXPORT_SYMBOL(dwc_dh_derive_keys); ++EXPORT_SYMBOL(dwc_dh_pk); ++# endif /* CONFIG_MACH_IPMATE */ ++ ++/* Crypto */ ++EXPORT_SYMBOL(dwc_wusb_aes_encrypt); ++EXPORT_SYMBOL(dwc_wusb_cmf); ++EXPORT_SYMBOL(dwc_wusb_prf); ++EXPORT_SYMBOL(dwc_wusb_fill_ccm_nonce); ++EXPORT_SYMBOL(dwc_wusb_gen_nonce); ++EXPORT_SYMBOL(dwc_wusb_gen_key); ++EXPORT_SYMBOL(dwc_wusb_gen_mic); ++#endif /* DWC_CRYPTOLIB */ ++ ++/* Notification */ ++#ifdef DWC_NOTIFYLIB ++EXPORT_SYMBOL(dwc_alloc_notification_manager); ++EXPORT_SYMBOL(dwc_free_notification_manager); ++EXPORT_SYMBOL(dwc_register_notifier); ++EXPORT_SYMBOL(dwc_unregister_notifier); ++EXPORT_SYMBOL(dwc_add_observer); ++EXPORT_SYMBOL(dwc_remove_observer); ++EXPORT_SYMBOL(dwc_notify); ++#endif ++ ++/* Memory Debugging Routines */ ++#ifdef DWC_DEBUG_MEMORY ++EXPORT_SYMBOL(dwc_alloc_debug); ++EXPORT_SYMBOL(dwc_alloc_atomic_debug); ++EXPORT_SYMBOL(dwc_free_debug); ++EXPORT_SYMBOL(dwc_dma_alloc_debug); ++EXPORT_SYMBOL(dwc_dma_free_debug); ++#endif ++ ++EXPORT_SYMBOL(DWC_MEMSET); ++EXPORT_SYMBOL(DWC_MEMCPY); ++EXPORT_SYMBOL(DWC_MEMMOVE); ++EXPORT_SYMBOL(DWC_MEMCMP); ++EXPORT_SYMBOL(DWC_STRNCMP); ++EXPORT_SYMBOL(DWC_STRCMP); ++EXPORT_SYMBOL(DWC_STRLEN); ++EXPORT_SYMBOL(DWC_STRCPY); ++EXPORT_SYMBOL(DWC_STRDUP); ++EXPORT_SYMBOL(DWC_ATOI); ++EXPORT_SYMBOL(DWC_ATOUI); ++ ++#ifdef DWC_UTFLIB ++EXPORT_SYMBOL(DWC_UTF8_TO_UTF16LE); ++#endif /* DWC_UTFLIB */ ++ ++EXPORT_SYMBOL(DWC_IN_IRQ); ++EXPORT_SYMBOL(DWC_IN_BH); ++EXPORT_SYMBOL(DWC_VPRINTF); ++EXPORT_SYMBOL(DWC_VSNPRINTF); ++EXPORT_SYMBOL(DWC_PRINTF); ++EXPORT_SYMBOL(DWC_SPRINTF); ++EXPORT_SYMBOL(DWC_SNPRINTF); ++EXPORT_SYMBOL(__DWC_WARN); ++EXPORT_SYMBOL(__DWC_ERROR); ++EXPORT_SYMBOL(DWC_EXCEPTION); ++ ++#ifdef DEBUG ++EXPORT_SYMBOL(__DWC_DEBUG); ++#endif ++ ++EXPORT_SYMBOL(__DWC_DMA_ALLOC); ++EXPORT_SYMBOL(__DWC_DMA_ALLOC_ATOMIC); ++EXPORT_SYMBOL(__DWC_DMA_FREE); ++EXPORT_SYMBOL(__DWC_ALLOC); ++EXPORT_SYMBOL(__DWC_ALLOC_ATOMIC); ++EXPORT_SYMBOL(__DWC_FREE); ++ ++#ifdef DWC_CRYPTOLIB ++EXPORT_SYMBOL(DWC_RANDOM_BYTES); ++EXPORT_SYMBOL(DWC_AES_CBC); ++EXPORT_SYMBOL(DWC_SHA256); ++EXPORT_SYMBOL(DWC_HMAC_SHA256); ++#endif ++ ++EXPORT_SYMBOL(DWC_CPU_TO_LE32); ++EXPORT_SYMBOL(DWC_CPU_TO_BE32); ++EXPORT_SYMBOL(DWC_LE32_TO_CPU); ++EXPORT_SYMBOL(DWC_BE32_TO_CPU); ++EXPORT_SYMBOL(DWC_CPU_TO_LE16); ++EXPORT_SYMBOL(DWC_CPU_TO_BE16); ++EXPORT_SYMBOL(DWC_LE16_TO_CPU); ++EXPORT_SYMBOL(DWC_BE16_TO_CPU); ++EXPORT_SYMBOL(DWC_READ_REG32); ++EXPORT_SYMBOL(DWC_WRITE_REG32); ++EXPORT_SYMBOL(DWC_MODIFY_REG32); ++ ++#if 0 ++EXPORT_SYMBOL(DWC_READ_REG64); ++EXPORT_SYMBOL(DWC_WRITE_REG64); ++EXPORT_SYMBOL(DWC_MODIFY_REG64); ++#endif ++ ++EXPORT_SYMBOL(DWC_SPINLOCK_ALLOC); ++EXPORT_SYMBOL(DWC_SPINLOCK_FREE); ++EXPORT_SYMBOL(DWC_SPINLOCK); ++EXPORT_SYMBOL(DWC_SPINUNLOCK); ++EXPORT_SYMBOL(DWC_SPINLOCK_IRQSAVE); ++EXPORT_SYMBOL(DWC_SPINUNLOCK_IRQRESTORE); ++EXPORT_SYMBOL(DWC_MUTEX_ALLOC); ++ ++#if (!defined(DWC_LINUX) || !defined(CONFIG_DEBUG_MUTEXES)) ++EXPORT_SYMBOL(DWC_MUTEX_FREE); ++#endif ++ ++EXPORT_SYMBOL(DWC_MUTEX_LOCK); ++EXPORT_SYMBOL(DWC_MUTEX_TRYLOCK); ++EXPORT_SYMBOL(DWC_MUTEX_UNLOCK); ++EXPORT_SYMBOL(DWC_UDELAY); ++EXPORT_SYMBOL(DWC_MDELAY); ++EXPORT_SYMBOL(DWC_MSLEEP); ++EXPORT_SYMBOL(DWC_TIME); ++EXPORT_SYMBOL(DWC_TIMER_ALLOC); ++EXPORT_SYMBOL(DWC_TIMER_FREE); ++EXPORT_SYMBOL(DWC_TIMER_SCHEDULE); ++EXPORT_SYMBOL(DWC_TIMER_CANCEL); ++EXPORT_SYMBOL(DWC_WAITQ_ALLOC); ++EXPORT_SYMBOL(DWC_WAITQ_FREE); ++EXPORT_SYMBOL(DWC_WAITQ_WAIT); ++EXPORT_SYMBOL(DWC_WAITQ_WAIT_TIMEOUT); ++EXPORT_SYMBOL(DWC_WAITQ_TRIGGER); ++EXPORT_SYMBOL(DWC_WAITQ_ABORT); ++EXPORT_SYMBOL(DWC_THREAD_RUN); ++EXPORT_SYMBOL(DWC_THREAD_STOP); ++EXPORT_SYMBOL(DWC_THREAD_SHOULD_STOP); ++EXPORT_SYMBOL(DWC_TASK_ALLOC); ++EXPORT_SYMBOL(DWC_TASK_FREE); ++EXPORT_SYMBOL(DWC_TASK_SCHEDULE); ++EXPORT_SYMBOL(DWC_WORKQ_WAIT_WORK_DONE); ++EXPORT_SYMBOL(DWC_WORKQ_ALLOC); ++EXPORT_SYMBOL(DWC_WORKQ_FREE); ++EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE); ++EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE_DELAYED); ++EXPORT_SYMBOL(DWC_WORKQ_PENDING); ++ ++static int dwc_common_port_init_module(void) ++{ ++ int result = 0; ++ ++ printk(KERN_DEBUG "Module dwc_common_port init\n" ); ++ ++#ifdef DWC_DEBUG_MEMORY ++ result = dwc_memory_debug_start(NULL); ++ if (result) { ++ printk(KERN_ERR ++ "dwc_memory_debug_start() failed with error %d\n", ++ result); ++ return result; ++ } ++#endif ++ ++#ifdef DWC_NOTIFYLIB ++ result = dwc_alloc_notification_manager(NULL, NULL); ++ if (result) { ++ printk(KERN_ERR ++ "dwc_alloc_notification_manager() failed with error %d\n", ++ result); ++ return result; ++ } ++#endif ++ return result; ++} ++ ++static void dwc_common_port_exit_module(void) ++{ ++ printk(KERN_DEBUG "Module dwc_common_port exit\n" ); ++ ++#ifdef DWC_NOTIFYLIB ++ dwc_free_notification_manager(); ++#endif ++ ++#ifdef DWC_DEBUG_MEMORY ++ dwc_memory_debug_stop(); ++#endif ++} ++ ++module_init(dwc_common_port_init_module); ++module_exit(dwc_common_port_exit_module); ++ ++MODULE_DESCRIPTION("DWC Common Library - Portable version"); ++MODULE_AUTHOR("Synopsys Inc."); ++MODULE_LICENSE ("GPL"); ++ ++#endif /* DWC_LIBMODULE */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c +@@ -0,0 +1,1275 @@ ++#include "dwc_os.h" ++#include "dwc_list.h" ++ ++#ifdef DWC_CCLIB ++# include "dwc_cc.h" ++#endif ++ ++#ifdef DWC_CRYPTOLIB ++# include "dwc_modpow.h" ++# include "dwc_dh.h" ++# include "dwc_crypto.h" ++#endif ++ ++#ifdef DWC_NOTIFYLIB ++# include "dwc_notifier.h" ++#endif ++ ++/* OS-Level Implementations */ ++ ++/* This is the NetBSD 4.0.1 kernel implementation of the DWC platform library. */ ++ ++ ++/* MISC */ ++ ++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size) ++{ ++ return memset(dest, byte, size); ++} ++ ++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size) ++{ ++ return memcpy(dest, src, size); ++} ++ ++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size) ++{ ++ bcopy(src, dest, size); ++ return dest; ++} ++ ++int DWC_MEMCMP(void *m1, void *m2, uint32_t size) ++{ ++ return memcmp(m1, m2, size); ++} ++ ++int DWC_STRNCMP(void *s1, void *s2, uint32_t size) ++{ ++ return strncmp(s1, s2, size); ++} ++ ++int DWC_STRCMP(void *s1, void *s2) ++{ ++ return strcmp(s1, s2); ++} ++ ++int DWC_STRLEN(char const *str) ++{ ++ return strlen(str); ++} ++ ++char *DWC_STRCPY(char *to, char const *from) ++{ ++ return strcpy(to, from); ++} ++ ++char *DWC_STRDUP(char const *str) ++{ ++ int len = DWC_STRLEN(str) + 1; ++ char *new = DWC_ALLOC_ATOMIC(len); ++ ++ if (!new) { ++ return NULL; ++ } ++ ++ DWC_MEMCPY(new, str, len); ++ return new; ++} ++ ++int DWC_ATOI(char *str, int32_t *value) ++{ ++ char *end = NULL; ++ ++ /* NetBSD doesn't have 'strtol' in the kernel, but 'strtoul' ++ * should be equivalent on 2's complement machines ++ */ ++ *value = strtoul(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++int DWC_ATOUI(char *str, uint32_t *value) ++{ ++ char *end = NULL; ++ ++ *value = strtoul(str, &end, 0); ++ if (*end == '\0') { ++ return 0; ++ } ++ ++ return -1; ++} ++ ++ ++#ifdef DWC_UTFLIB ++/* From usbstring.c */ ++ ++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len) ++{ ++ int count = 0; ++ u8 c; ++ u16 uchar; ++ ++ /* this insists on correct encodings, though not minimal ones. ++ * BUT it currently rejects legit 4-byte UTF-8 code points, ++ * which need surrogate pairs. (Unicode 3.1 can use them.) ++ */ ++ while (len != 0 && (c = (u8) *s++) != 0) { ++ if (unlikely(c & 0x80)) { ++ // 2-byte sequence: ++ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx ++ if ((c & 0xe0) == 0xc0) { ++ uchar = (c & 0x1f) << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ // 3-byte sequence (most CJKV characters): ++ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx ++ } else if ((c & 0xf0) == 0xe0) { ++ uchar = (c & 0x0f) << 12; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ /* no bogus surrogates */ ++ if (0xd800 <= uchar && uchar <= 0xdfff) ++ goto fail; ++ ++ // 4-byte sequence (surrogate pairs, currently rare): ++ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx ++ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx ++ // (uuuuu = wwww + 1) ++ // FIXME accept the surrogate code points (only) ++ } else ++ goto fail; ++ } else ++ uchar = c; ++ put_unaligned (cpu_to_le16 (uchar), cp++); ++ count++; ++ len--; ++ } ++ return count; ++fail: ++ return -1; ++} ++ ++#endif /* DWC_UTFLIB */ ++ ++ ++/* dwc_debug.h */ ++ ++dwc_bool_t DWC_IN_IRQ(void) ++{ ++// return in_irq(); ++ return 0; ++} ++ ++dwc_bool_t DWC_IN_BH(void) ++{ ++// return in_softirq(); ++ return 0; ++} ++ ++void DWC_VPRINTF(char *format, va_list args) ++{ ++ vprintf(format, args); ++} ++ ++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args) ++{ ++ return vsnprintf(str, size, format, args); ++} ++ ++void DWC_PRINTF(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++int DWC_SPRINTF(char *buffer, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsprintf(buffer, format, args); ++ va_end(args); ++ return retval; ++} ++ ++int DWC_SNPRINTF(char *buffer, int size, char *format, ...) ++{ ++ int retval; ++ va_list args; ++ ++ va_start(args, format); ++ retval = vsnprintf(buffer, size, format, args); ++ va_end(args); ++ return retval; ++} ++ ++void __DWC_WARN(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void __DWC_ERROR(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++ ++void DWC_EXCEPTION(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++// BUG_ON(1); ??? ++} ++ ++#ifdef DEBUG ++void __DWC_DEBUG(char *format, ...) ++{ ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VPRINTF(format, args); ++ va_end(args); ++} ++#endif ++ ++ ++/* dwc_mem.h */ ++ ++#if 0 ++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, ++ uint32_t align, ++ uint32_t alloc) ++{ ++ struct dma_pool *pool = dma_pool_create("Pool", NULL, ++ size, align, alloc); ++ return (dwc_pool_t *)pool; ++} ++ ++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool) ++{ ++ dma_pool_destroy((struct dma_pool *)pool); ++} ++ ++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++// return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr); ++ return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr); ++} ++ ++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr) ++{ ++ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr); ++ memset(..); ++} ++ ++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr) ++{ ++ dma_pool_free(pool, vaddr, daddr); ++} ++#endif ++ ++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) ++{ ++ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; ++ int error; ++ ++ error = bus_dmamem_alloc(dma->dma_tag, size, 1, size, dma->segs, ++ sizeof(dma->segs) / sizeof(dma->segs[0]), ++ &dma->nsegs, BUS_DMA_NOWAIT); ++ if (error) { ++ printf("%s: bus_dmamem_alloc(%ju) failed: %d\n", __func__, ++ (uintmax_t)size, error); ++ goto fail_0; ++ } ++ ++ error = bus_dmamem_map(dma->dma_tag, dma->segs, dma->nsegs, size, ++ (caddr_t *)&dma->dma_vaddr, ++ BUS_DMA_NOWAIT | BUS_DMA_COHERENT); ++ if (error) { ++ printf("%s: bus_dmamem_map failed: %d\n", __func__, error); ++ goto fail_1; ++ } ++ ++ error = bus_dmamap_create(dma->dma_tag, size, 1, size, 0, ++ BUS_DMA_NOWAIT, &dma->dma_map); ++ if (error) { ++ printf("%s: bus_dmamap_create failed: %d\n", __func__, error); ++ goto fail_2; ++ } ++ ++ error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr, ++ size, NULL, BUS_DMA_NOWAIT); ++ if (error) { ++ printf("%s: bus_dmamap_load failed: %d\n", __func__, error); ++ goto fail_3; ++ } ++ ++ dma->dma_paddr = (bus_addr_t)dma->segs[0].ds_addr; ++ *dma_addr = dma->dma_paddr; ++ return dma->dma_vaddr; ++ ++fail_3: ++ bus_dmamap_destroy(dma->dma_tag, dma->dma_map); ++fail_2: ++ bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size); ++fail_1: ++ bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs); ++fail_0: ++ dma->dma_map = NULL; ++ dma->dma_vaddr = NULL; ++ dma->nsegs = 0; ++ ++ return NULL; ++} ++ ++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr) ++{ ++ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; ++ ++ if (dma->dma_map != NULL) { ++ bus_dmamap_sync(dma->dma_tag, dma->dma_map, 0, size, ++ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); ++ bus_dmamap_unload(dma->dma_tag, dma->dma_map); ++ bus_dmamap_destroy(dma->dma_tag, dma->dma_map); ++ bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size); ++ bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs); ++ dma->dma_paddr = 0; ++ dma->dma_map = NULL; ++ dma->dma_vaddr = NULL; ++ dma->nsegs = 0; ++ } ++} ++ ++void *__DWC_ALLOC(void *mem_ctx, uint32_t size) ++{ ++ return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO); ++} ++ ++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size) ++{ ++ return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO); ++} ++ ++void __DWC_FREE(void *mem_ctx, void *addr) ++{ ++ free(addr, M_DEVBUF); ++} ++ ++ ++#ifdef DWC_CRYPTOLIB ++/* dwc_crypto.h */ ++ ++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length) ++{ ++ get_random_bytes(buffer, length); ++} ++ ++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out) ++{ ++ struct crypto_blkcipher *tfm; ++ struct blkcipher_desc desc; ++ struct scatterlist sgd; ++ struct scatterlist sgs; ++ ++ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); ++ if (tfm == NULL) { ++ printk("failed to load transform for aes CBC\n"); ++ return -1; ++ } ++ ++ crypto_blkcipher_setkey(tfm, key, keylen); ++ crypto_blkcipher_set_iv(tfm, iv, 16); ++ ++ sg_init_one(&sgd, out, messagelen); ++ sg_init_one(&sgs, message, messagelen); ++ ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) { ++ crypto_free_blkcipher(tfm); ++ DWC_ERROR("AES CBC encryption failed"); ++ return -1; ++ } ++ ++ crypto_free_blkcipher(tfm); ++ return 0; ++} ++ ++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, len); ++ crypto_hash_digest(&desc, &sg, len, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++ ++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, ++ uint8_t *key, uint32_t keylen, uint8_t *out) ++{ ++ struct crypto_hash *tfm; ++ struct hash_desc desc; ++ struct scatterlist sg; ++ ++ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC); ++ if (IS_ERR(tfm)) { ++ DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm)); ++ return 0; ++ } ++ desc.tfm = tfm; ++ desc.flags = 0; ++ ++ sg_init_one(&sg, message, messagelen); ++ crypto_hash_setkey(tfm, key, keylen); ++ crypto_hash_digest(&desc, &sg, messagelen, out); ++ crypto_free_hash(tfm); ++ ++ return 1; ++} ++ ++#endif /* DWC_CRYPTOLIB */ ++ ++ ++/* Byte Ordering Conversions */ ++ ++uint32_t DWC_CPU_TO_LE32(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_CPU_TO_BE32(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_LE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint32_t DWC_BE32_TO_CPU(uint32_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ ++ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_LE16(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_CPU_TO_BE16(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_LE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __LITTLE_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++uint16_t DWC_BE16_TO_CPU(uint16_t *p) ++{ ++#ifdef __BIG_ENDIAN ++ return *p; ++#else ++ uint8_t *u_p = (uint8_t *)p; ++ return (u_p[1] | (u_p[0] << 8)); ++#endif ++} ++ ++ ++/* Registers */ ++ ++uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ return bus_space_read_4(io->iot, io->ioh, ior); ++} ++ ++#if 0 ++uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ return bus_space_read_8(io->iot, io->ioh, ior); ++} ++#endif ++ ++void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_4(io->iot, io->ioh, ior, value); ++} ++ ++#if 0 ++void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_8(io->iot, io->ioh, ior, value); ++} ++#endif ++ ++void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, ++ uint32_t set_mask) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_4(io->iot, io->ioh, ior, ++ (bus_space_read_4(io->iot, io->ioh, ior) & ++ ~clear_mask) | set_mask); ++} ++ ++#if 0 ++void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, ++ uint64_t set_mask) ++{ ++ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; ++ bus_size_t ior = (bus_size_t)reg; ++ ++ bus_space_write_8(io->iot, io->ioh, ior, ++ (bus_space_read_8(io->iot, io->ioh, ior) & ++ ~clear_mask) | set_mask); ++} ++#endif ++ ++ ++/* Locking */ ++ ++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void) ++{ ++ struct simplelock *sl = DWC_ALLOC(sizeof(*sl)); ++ ++ if (!sl) { ++ DWC_ERROR("Cannot allocate memory for spinlock"); ++ return NULL; ++ } ++ ++ simple_lock_init(sl); ++ return (dwc_spinlock_t *)sl; ++} ++ ++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock) ++{ ++ struct simplelock *sl = (struct simplelock *)lock; ++ ++ DWC_FREE(sl); ++} ++ ++void DWC_SPINLOCK(dwc_spinlock_t *lock) ++{ ++ simple_lock((struct simplelock *)lock); ++} ++ ++void DWC_SPINUNLOCK(dwc_spinlock_t *lock) ++{ ++ simple_unlock((struct simplelock *)lock); ++} ++ ++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags) ++{ ++ simple_lock((struct simplelock *)lock); ++ *flags = splbio(); ++} ++ ++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags) ++{ ++ splx(flags); ++ simple_unlock((struct simplelock *)lock); ++} ++ ++dwc_mutex_t *DWC_MUTEX_ALLOC(void) ++{ ++ dwc_mutex_t *mutex = DWC_ALLOC(sizeof(struct lock)); ++ ++ if (!mutex) { ++ DWC_ERROR("Cannot allocate memory for mutex"); ++ return NULL; ++ } ++ ++ lockinit((struct lock *)mutex, 0, "dw3mtx", 0, 0); ++ return mutex; ++} ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) ++#else ++void DWC_MUTEX_FREE(dwc_mutex_t *mutex) ++{ ++ DWC_FREE(mutex); ++} ++#endif ++ ++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex) ++{ ++ lockmgr((struct lock *)mutex, LK_EXCLUSIVE, NULL); ++} ++ ++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex) ++{ ++ int status; ++ ++ status = lockmgr((struct lock *)mutex, LK_EXCLUSIVE | LK_NOWAIT, NULL); ++ return status == 0; ++} ++ ++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex) ++{ ++ lockmgr((struct lock *)mutex, LK_RELEASE, NULL); ++} ++ ++ ++/* Timing */ ++ ++void DWC_UDELAY(uint32_t usecs) ++{ ++ DELAY(usecs); ++} ++ ++void DWC_MDELAY(uint32_t msecs) ++{ ++ do { ++ DELAY(1000); ++ } while (--msecs); ++} ++ ++void DWC_MSLEEP(uint32_t msecs) ++{ ++ struct timeval tv; ++ ++ tv.tv_sec = msecs / 1000; ++ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; ++ tsleep(&tv, 0, "dw3slp", tvtohz(&tv)); ++} ++ ++uint32_t DWC_TIME(void) ++{ ++ struct timeval tv; ++ ++ microuptime(&tv); // or getmicrouptime? (less precise, but faster) ++ return tv.tv_sec * 1000 + tv.tv_usec / 1000; ++} ++ ++ ++/* Timers */ ++ ++struct dwc_timer { ++ struct callout t; ++ char *name; ++ dwc_spinlock_t *lock; ++ dwc_timer_callback_t cb; ++ void *data; ++}; ++ ++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data) ++{ ++ dwc_timer_t *t = DWC_ALLOC(sizeof(*t)); ++ ++ if (!t) { ++ DWC_ERROR("Cannot allocate memory for timer"); ++ return NULL; ++ } ++ ++ callout_init(&t->t); ++ ++ t->name = DWC_STRDUP(name); ++ if (!t->name) { ++ DWC_ERROR("Cannot allocate memory for timer->name"); ++ goto no_name; ++ } ++ ++ t->lock = DWC_SPINLOCK_ALLOC(); ++ if (!t->lock) { ++ DWC_ERROR("Cannot allocate memory for timer->lock"); ++ goto no_lock; ++ } ++ ++ t->cb = cb; ++ t->data = data; ++ ++ return t; ++ ++ no_lock: ++ DWC_FREE(t->name); ++ no_name: ++ DWC_FREE(t); ++ ++ return NULL; ++} ++ ++void DWC_TIMER_FREE(dwc_timer_t *timer) ++{ ++ callout_stop(&timer->t); ++ DWC_SPINLOCK_FREE(timer->lock); ++ DWC_FREE(timer->name); ++ DWC_FREE(timer); ++} ++ ++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time) ++{ ++ struct timeval tv; ++ ++ tv.tv_sec = time / 1000; ++ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; ++ callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data); ++} ++ ++void DWC_TIMER_CANCEL(dwc_timer_t *timer) ++{ ++ callout_stop(&timer->t); ++} ++ ++ ++/* Wait Queues */ ++ ++struct dwc_waitq { ++ struct simplelock lock; ++ int abort; ++}; ++ ++dwc_waitq_t *DWC_WAITQ_ALLOC(void) ++{ ++ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ DWC_ERROR("Cannot allocate memory for waitqueue"); ++ return NULL; ++ } ++ ++ simple_lock_init(&wq->lock); ++ wq->abort = 0; ++ ++ return wq; ++} ++ ++void DWC_WAITQ_FREE(dwc_waitq_t *wq) ++{ ++ DWC_FREE(wq); ++} ++ ++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data) ++{ ++ int ipl; ++ int result = 0; ++ ++ simple_lock(&wq->lock); ++ ipl = splbio(); ++ ++ /* Skip the sleep if already aborted or triggered */ ++ if (!wq->abort && !cond(data)) { ++ splx(ipl); ++ result = ltsleep(wq, PCATCH, "dw3wat", 0, &wq->lock); // infinite timeout ++ ipl = splbio(); ++ } ++ ++ if (result == 0) { // awoken ++ if (wq->abort) { ++ wq->abort = 0; ++ result = -DWC_E_ABORT; ++ } else { ++ result = 0; ++ } ++ ++ splx(ipl); ++ simple_unlock(&wq->lock); ++ } else { ++ wq->abort = 0; ++ splx(ipl); ++ simple_unlock(&wq->lock); ++ ++ if (result == ERESTART) { // signaled - restart ++ result = -DWC_E_RESTART; ++ } else { // signaled - must be EINTR ++ result = -DWC_E_ABORT; ++ } ++ } ++ ++ return result; ++} ++ ++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, ++ void *data, int32_t msecs) ++{ ++ struct timeval tv, tv1, tv2; ++ int ipl; ++ int result = 0; ++ ++ tv.tv_sec = msecs / 1000; ++ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; ++ ++ simple_lock(&wq->lock); ++ ipl = splbio(); ++ ++ /* Skip the sleep if already aborted or triggered */ ++ if (!wq->abort && !cond(data)) { ++ splx(ipl); ++ getmicrouptime(&tv1); ++ result = ltsleep(wq, PCATCH, "dw3wto", tvtohz(&tv), &wq->lock); ++ getmicrouptime(&tv2); ++ ipl = splbio(); ++ } ++ ++ if (result == 0) { // awoken ++ if (wq->abort) { ++ wq->abort = 0; ++ splx(ipl); ++ simple_unlock(&wq->lock); ++ result = -DWC_E_ABORT; ++ } else { ++ splx(ipl); ++ simple_unlock(&wq->lock); ++ ++ tv2.tv_usec -= tv1.tv_usec; ++ if (tv2.tv_usec < 0) { ++ tv2.tv_usec += 1000000; ++ tv2.tv_sec--; ++ } ++ ++ tv2.tv_sec -= tv1.tv_sec; ++ result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000; ++ result = msecs - result; ++ if (result <= 0) ++ result = 1; ++ } ++ } else { ++ wq->abort = 0; ++ splx(ipl); ++ simple_unlock(&wq->lock); ++ ++ if (result == ERESTART) { // signaled - restart ++ result = -DWC_E_RESTART; ++ ++ } else if (result == EINTR) { // signaled - interrupt ++ result = -DWC_E_ABORT; ++ ++ } else { // timed out ++ result = -DWC_E_TIMEOUT; ++ } ++ } ++ ++ return result; ++} ++ ++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq) ++{ ++ wakeup(wq); ++} ++ ++void DWC_WAITQ_ABORT(dwc_waitq_t *wq) ++{ ++ int ipl; ++ ++ simple_lock(&wq->lock); ++ ipl = splbio(); ++ wq->abort = 1; ++ wakeup(wq); ++ splx(ipl); ++ simple_unlock(&wq->lock); ++} ++ ++ ++/* Threading */ ++ ++struct dwc_thread { ++ struct proc *proc; ++ int abort; ++}; ++ ++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data) ++{ ++ int retval; ++ dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread)); ++ ++ if (!thread) { ++ return NULL; ++ } ++ ++ thread->abort = 0; ++ retval = kthread_create1((void (*)(void *))func, data, &thread->proc, ++ "%s", name); ++ if (retval) { ++ DWC_FREE(thread); ++ return NULL; ++ } ++ ++ return thread; ++} ++ ++int DWC_THREAD_STOP(dwc_thread_t *thread) ++{ ++ int retval; ++ ++ thread->abort = 1; ++ retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz); ++ ++ if (retval == 0) { ++ /* DWC_THREAD_EXIT() will free the thread struct */ ++ return 0; ++ } ++ ++ /* NOTE: We leak the thread struct if thread doesn't die */ ++ ++ if (retval == EWOULDBLOCK) { ++ return -DWC_E_TIMEOUT; ++ } ++ ++ return -DWC_E_UNKNOWN; ++} ++ ++dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread) ++{ ++ return thread->abort; ++} ++ ++void DWC_THREAD_EXIT(dwc_thread_t *thread) ++{ ++ wakeup(&thread->abort); ++ DWC_FREE(thread); ++ kthread_exit(0); ++} ++ ++/* tasklets ++ - Runs in interrupt context (cannot sleep) ++ - Each tasklet runs on a single CPU ++ - Different tasklets can be running simultaneously on different CPUs ++ [ On NetBSD there is no corresponding mechanism, drivers don't have bottom- ++ halves. So we just call the callback directly from DWC_TASK_SCHEDULE() ] ++ */ ++struct dwc_tasklet { ++ dwc_tasklet_callback_t cb; ++ void *data; ++}; ++ ++static void tasklet_callback(void *data) ++{ ++ dwc_tasklet_t *task = (dwc_tasklet_t *)data; ++ ++ task->cb(task->data); ++} ++ ++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data) ++{ ++ dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task)); ++ ++ if (task) { ++ task->cb = cb; ++ task->data = data; ++ } else { ++ DWC_ERROR("Cannot allocate memory for tasklet"); ++ } ++ ++ return task; ++} ++ ++void DWC_TASK_FREE(dwc_tasklet_t *task) ++{ ++ DWC_FREE(task); ++} ++ ++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task) ++{ ++ tasklet_callback(task); ++} ++ ++ ++/* workqueues ++ - Runs in process context (can sleep) ++ */ ++typedef struct work_container { ++ dwc_work_callback_t cb; ++ void *data; ++ dwc_workq_t *wq; ++ char *name; ++ int hz; ++ struct work task; ++} work_container_t; ++ ++struct dwc_workq { ++ struct workqueue *taskq; ++ dwc_spinlock_t *lock; ++ dwc_waitq_t *waitq; ++ int pending; ++ struct work_container *container; ++}; ++ ++static void do_work(struct work *task, void *data) ++{ ++ dwc_workq_t *wq = (dwc_workq_t *)data; ++ work_container_t *container = wq->container; ++ dwc_irqflags_t flags; ++ ++ if (container->hz) { ++ tsleep(container, 0, "dw3wrk", container->hz); ++ } ++ ++ container->cb(container->data); ++ DWC_DEBUG("Work done: %s, container=%p", container->name, container); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ if (container->name) ++ DWC_FREE(container->name); ++ DWC_FREE(container); ++ wq->pending--; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++} ++ ++static int work_done(void *data) ++{ ++ dwc_workq_t *workq = (dwc_workq_t *)data; ++ ++ return workq->pending == 0; ++} ++ ++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout) ++{ ++ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout); ++} ++ ++dwc_workq_t *DWC_WORKQ_ALLOC(char *name) ++{ ++ int result; ++ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq)); ++ ++ if (!wq) { ++ DWC_ERROR("Cannot allocate memory for workqueue"); ++ return NULL; ++ } ++ ++ result = workqueue_create(&wq->taskq, name, do_work, wq, 0 /*PWAIT*/, ++ IPL_BIO, 0); ++ if (result) { ++ DWC_ERROR("Cannot create workqueue"); ++ goto no_taskq; ++ } ++ ++ wq->pending = 0; ++ ++ wq->lock = DWC_SPINLOCK_ALLOC(); ++ if (!wq->lock) { ++ DWC_ERROR("Cannot allocate memory for spinlock"); ++ goto no_lock; ++ } ++ ++ wq->waitq = DWC_WAITQ_ALLOC(); ++ if (!wq->waitq) { ++ DWC_ERROR("Cannot allocate memory for waitqueue"); ++ goto no_waitq; ++ } ++ ++ return wq; ++ ++ no_waitq: ++ DWC_SPINLOCK_FREE(wq->lock); ++ no_lock: ++ workqueue_destroy(wq->taskq); ++ no_taskq: ++ DWC_FREE(wq); ++ ++ return NULL; ++} ++ ++void DWC_WORKQ_FREE(dwc_workq_t *wq) ++{ ++#ifdef DEBUG ++ dwc_irqflags_t flags; ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ ++ if (wq->pending != 0) { ++ struct work_container *container = wq->container; ++ ++ DWC_ERROR("Destroying work queue with pending work"); ++ ++ if (container && container->name) { ++ DWC_ERROR("Work %s still pending", container->name); ++ } ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++#endif ++ DWC_WAITQ_FREE(wq->waitq); ++ DWC_SPINLOCK_FREE(wq->lock); ++ workqueue_destroy(wq->taskq); ++ DWC_FREE(wq); ++} ++ ++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data, ++ char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ container->hz = 0; ++ wq->container = container; ++ ++ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); ++ workqueue_enqueue(wq->taskq, &container->task); ++} ++ ++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb, ++ void *data, uint32_t time, char *format, ...) ++{ ++ dwc_irqflags_t flags; ++ work_container_t *container; ++ static char name[128]; ++ struct timeval tv; ++ va_list args; ++ ++ va_start(args, format); ++ DWC_VSNPRINTF(name, 128, format, args); ++ va_end(args); ++ ++ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); ++ wq->pending++; ++ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); ++ DWC_WAITQ_TRIGGER(wq->waitq); ++ ++ container = DWC_ALLOC_ATOMIC(sizeof(*container)); ++ if (!container) { ++ DWC_ERROR("Cannot allocate memory for container"); ++ return; ++ } ++ ++ container->name = DWC_STRDUP(name); ++ if (!container->name) { ++ DWC_ERROR("Cannot allocate memory for container->name"); ++ DWC_FREE(container); ++ return; ++ } ++ ++ container->cb = cb; ++ container->data = data; ++ container->wq = wq; ++ tv.tv_sec = time / 1000; ++ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; ++ container->hz = tvtohz(&tv); ++ wq->container = container; ++ ++ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); ++ workqueue_enqueue(wq->taskq, &container->task); ++} ++ ++int DWC_WORKQ_PENDING(dwc_workq_t *wq) ++{ ++ return wq->pending; ++} +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_crypto.c +@@ -0,0 +1,308 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.c $ ++ * $Revision: #5 $ ++ * $Date: 2010/09/28 $ ++ * $Change: 1596182 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++ ++/** @file ++ * This file contains the WUSB cryptographic routines. ++ */ ++ ++#ifdef DWC_CRYPTOLIB ++ ++#include "dwc_crypto.h" ++#include "usb.h" ++ ++#ifdef DEBUG ++static inline void dump_bytes(char *name, uint8_t *bytes, int len) ++{ ++ int i; ++ DWC_PRINTF("%s: ", name); ++ for (i=0; idst == src, then the bytes will be encrypted ++ * in-place. ++ * ++ * @return 0 on success, negative error code on error. ++ */ ++int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst) ++{ ++ u8 block_t[16]; ++ DWC_MEMSET(block_t, 0, 16); ++ ++ return DWC_AES_CBC(src, 16, key, 16, block_t, dst); ++} ++ ++/** ++ * The CCM-MAC-FUNCTION described in section 6.5 of the WUSB spec. ++ * This function takes a data string and returns the encrypted CBC ++ * Counter-mode MIC. ++ * ++ * @param key The 128-bit symmetric key. ++ * @param nonce The CCM nonce. ++ * @param label The unique 14-byte ASCII text label. ++ * @param bytes The byte array to be encrypted. ++ * @param len Length of the byte array. ++ * @param result Byte array to receive the 8-byte encrypted MIC. ++ */ ++void dwc_wusb_cmf(u8 *key, u8 *nonce, ++ char *label, u8 *bytes, int len, u8 *result) ++{ ++ u8 block_m[16]; ++ u8 block_x[16]; ++ u8 block_t[8]; ++ int idx, blkNum; ++ u16 la = (u16)(len + 14); ++ ++ /* Set the AES-128 key */ ++ //dwc_aes_setkey(tfm, key, 16); ++ ++ /* Fill block B0 from flags = 0x59, N, and l(m) = 0 */ ++ block_m[0] = 0x59; ++ for (idx = 0; idx < 13; idx++) ++ block_m[idx + 1] = nonce[idx]; ++ block_m[14] = 0; ++ block_m[15] = 0; ++ ++ /* Produce the CBC IV */ ++ dwc_wusb_aes_encrypt(block_m, key, block_x); ++ show_block(block_m, "CBC IV in: ", "\n", 0); ++ show_block(block_x, "CBC IV out:", "\n", 0); ++ ++ /* Fill block B1 from l(a) = Blen + 14, and A */ ++ block_x[0] ^= (u8)(la >> 8); ++ block_x[1] ^= (u8)la; ++ for (idx = 0; idx < 14; idx++) ++ block_x[idx + 2] ^= label[idx]; ++ show_block(block_x, "After xor: ", "b1\n", 16); ++ ++ dwc_wusb_aes_encrypt(block_x, key, block_x); ++ show_block(block_x, "After AES: ", "b1\n", 16); ++ ++ idx = 0; ++ blkNum = 0; ++ ++ /* Fill remaining blocks with B */ ++ while (len-- > 0) { ++ block_x[idx] ^= *bytes++; ++ if (++idx >= 16) { ++ idx = 0; ++ show_block(block_x, "After xor: ", "\n", blkNum); ++ dwc_wusb_aes_encrypt(block_x, key, block_x); ++ show_block(block_x, "After AES: ", "\n", blkNum); ++ blkNum++; ++ } ++ } ++ ++ /* Handle partial last block */ ++ if (idx > 0) { ++ show_block(block_x, "After xor: ", "\n", blkNum); ++ dwc_wusb_aes_encrypt(block_x, key, block_x); ++ show_block(block_x, "After AES: ", "\n", blkNum); ++ } ++ ++ /* Save the MIC tag */ ++ DWC_MEMCPY(block_t, block_x, 8); ++ show_block(block_t, "MIC tag : ", NULL, 8); ++ ++ /* Fill block A0 from flags = 0x01, N, and counter = 0 */ ++ block_m[0] = 0x01; ++ block_m[14] = 0; ++ block_m[15] = 0; ++ ++ /* Encrypt the counter */ ++ dwc_wusb_aes_encrypt(block_m, key, block_x); ++ show_block(block_x, "CTR[MIC] : ", NULL, 8); ++ ++ /* XOR with MIC tag */ ++ for (idx = 0; idx < 8; idx++) { ++ block_t[idx] ^= block_x[idx]; ++ } ++ ++ /* Return result to caller */ ++ DWC_MEMCPY(result, block_t, 8); ++ show_block(result, "CCM-MIC : ", NULL, 8); ++ ++} ++ ++/** ++ * The PRF function described in section 6.5 of the WUSB spec. This function ++ * concatenates MIC values returned from dwc_cmf() to create a value of ++ * the requested length. ++ * ++ * @param prf_len Length of the PRF function in bits (64, 128, or 256). ++ * @param key, nonce, label, bytes, len Same as for dwc_cmf(). ++ * @param result Byte array to receive the result. ++ */ ++void dwc_wusb_prf(int prf_len, u8 *key, ++ u8 *nonce, char *label, u8 *bytes, int len, u8 *result) ++{ ++ int i; ++ ++ nonce[0] = 0; ++ for (i = 0; i < prf_len >> 6; i++, nonce[0]++) { ++ dwc_wusb_cmf(key, nonce, label, bytes, len, result); ++ result += 8; ++ } ++} ++ ++/** ++ * Fills in CCM Nonce per the WUSB spec. ++ * ++ * @param[in] haddr Host address. ++ * @param[in] daddr Device address. ++ * @param[in] tkid Session Key(PTK) identifier. ++ * @param[out] nonce Pointer to where the CCM Nonce output is to be written. ++ */ ++void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid, ++ uint8_t *nonce) ++{ ++ ++ DWC_DEBUG("%s %x %x\n", __func__, daddr, haddr); ++ ++ DWC_MEMSET(&nonce[0], 0, 16); ++ ++ DWC_MEMCPY(&nonce[6], tkid, 3); ++ nonce[9] = daddr & 0xFF; ++ nonce[10] = (daddr >> 8) & 0xFF; ++ nonce[11] = haddr & 0xFF; ++ nonce[12] = (haddr >> 8) & 0xFF; ++ ++ dump_bytes("CCM nonce", nonce, 16); ++} ++ ++/** ++ * Generates a 16-byte cryptographic-grade random number for the Host/Device ++ * Nonce. ++ */ ++void dwc_wusb_gen_nonce(uint16_t addr, uint8_t *nonce) ++{ ++ uint8_t inonce[16]; ++ uint32_t temp[4]; ++ ++ /* Fill in the Nonce */ ++ DWC_MEMSET(&inonce[0], 0, sizeof(inonce)); ++ inonce[9] = addr & 0xFF; ++ inonce[10] = (addr >> 8) & 0xFF; ++ inonce[11] = inonce[9]; ++ inonce[12] = inonce[10]; ++ ++ /* Collect "randomness samples" */ ++ DWC_RANDOM_BYTES((uint8_t *)temp, 16); ++ ++ dwc_wusb_prf_128((uint8_t *)temp, nonce, ++ "Random Numbers", (uint8_t *)temp, sizeof(temp), ++ nonce); ++} ++ ++/** ++ * Generates the Session Key (PTK) and Key Confirmation Key (KCK) per the ++ * WUSB spec. ++ * ++ * @param[in] ccm_nonce Pointer to CCM Nonce. ++ * @param[in] mk Master Key to derive the session from ++ * @param[in] hnonce Pointer to Host Nonce. ++ * @param[in] dnonce Pointer to Device Nonce. ++ * @param[out] kck Pointer to where the KCK output is to be written. ++ * @param[out] ptk Pointer to where the PTK output is to be written. ++ */ ++void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk, uint8_t *hnonce, ++ uint8_t *dnonce, uint8_t *kck, uint8_t *ptk) ++{ ++ uint8_t idata[32]; ++ uint8_t odata[32]; ++ ++ dump_bytes("ck", mk, 16); ++ dump_bytes("hnonce", hnonce, 16); ++ dump_bytes("dnonce", dnonce, 16); ++ ++ /* The data is the HNonce and DNonce concatenated */ ++ DWC_MEMCPY(&idata[0], hnonce, 16); ++ DWC_MEMCPY(&idata[16], dnonce, 16); ++ ++ dwc_wusb_prf_256(mk, ccm_nonce, "Pair-wise keys", idata, 32, odata); ++ ++ /* Low 16 bytes of the result is the KCK, high 16 is the PTK */ ++ DWC_MEMCPY(kck, &odata[0], 16); ++ DWC_MEMCPY(ptk, &odata[16], 16); ++ ++ dump_bytes("kck", kck, 16); ++ dump_bytes("ptk", ptk, 16); ++} ++ ++/** ++ * Generates the Message Integrity Code over the Handshake data per the ++ * WUSB spec. ++ * ++ * @param ccm_nonce Pointer to CCM Nonce. ++ * @param kck Pointer to Key Confirmation Key. ++ * @param data Pointer to Handshake data to be checked. ++ * @param mic Pointer to where the MIC output is to be written. ++ */ ++void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t *kck, ++ uint8_t *data, uint8_t *mic) ++{ ++ ++ dwc_wusb_prf_64(kck, ccm_nonce, "out-of-bandMIC", ++ data, WUSB_HANDSHAKE_LEN_FOR_MIC, mic); ++} ++ ++#endif /* DWC_CRYPTOLIB */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_crypto.h +@@ -0,0 +1,111 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.h $ ++ * $Revision: #3 $ ++ * $Date: 2010/09/28 $ ++ * $Change: 1596182 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++ ++#ifndef _DWC_CRYPTO_H_ ++#define _DWC_CRYPTO_H_ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++/** @file ++ * ++ * This file contains declarations for the WUSB Cryptographic routines as ++ * defined in the WUSB spec. They are only to be used internally by the DWC UWB ++ * modules. ++ */ ++ ++#include "dwc_os.h" ++ ++int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst); ++ ++void dwc_wusb_cmf(u8 *key, u8 *nonce, ++ char *label, u8 *bytes, int len, u8 *result); ++void dwc_wusb_prf(int prf_len, u8 *key, ++ u8 *nonce, char *label, u8 *bytes, int len, u8 *result); ++ ++/** ++ * The PRF-64 function described in section 6.5 of the WUSB spec. ++ * ++ * @param key, nonce, label, bytes, len, result Same as for dwc_prf(). ++ */ ++static inline void dwc_wusb_prf_64(u8 *key, u8 *nonce, ++ char *label, u8 *bytes, int len, u8 *result) ++{ ++ dwc_wusb_prf(64, key, nonce, label, bytes, len, result); ++} ++ ++/** ++ * The PRF-128 function described in section 6.5 of the WUSB spec. ++ * ++ * @param key, nonce, label, bytes, len, result Same as for dwc_prf(). ++ */ ++static inline void dwc_wusb_prf_128(u8 *key, u8 *nonce, ++ char *label, u8 *bytes, int len, u8 *result) ++{ ++ dwc_wusb_prf(128, key, nonce, label, bytes, len, result); ++} ++ ++/** ++ * The PRF-256 function described in section 6.5 of the WUSB spec. ++ * ++ * @param key, nonce, label, bytes, len, result Same as for dwc_prf(). ++ */ ++static inline void dwc_wusb_prf_256(u8 *key, u8 *nonce, ++ char *label, u8 *bytes, int len, u8 *result) ++{ ++ dwc_wusb_prf(256, key, nonce, label, bytes, len, result); ++} ++ ++ ++void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid, ++ uint8_t *nonce); ++void dwc_wusb_gen_nonce(uint16_t addr, ++ uint8_t *nonce); ++ ++void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk, ++ uint8_t *hnonce, uint8_t *dnonce, ++ uint8_t *kck, uint8_t *ptk); ++ ++ ++void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t ++ *kck, uint8_t *data, uint8_t *mic); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _DWC_CRYPTO_H_ */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_dh.c +@@ -0,0 +1,291 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_dh.c $ ++ * $Revision: #3 $ ++ * $Date: 2010/09/28 $ ++ * $Change: 1596182 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++#ifdef DWC_CRYPTOLIB ++ ++#ifndef CONFIG_MACH_IPMATE ++ ++#include "dwc_dh.h" ++#include "dwc_modpow.h" ++ ++#ifdef DEBUG ++/* This function prints out a buffer in the format described in the Association ++ * Model specification. */ ++static void dh_dump(char *str, void *_num, int len) ++{ ++ uint8_t *num = _num; ++ int i; ++ DWC_PRINTF("%s\n", str); ++ for (i = 0; i < len; i ++) { ++ DWC_PRINTF("%02x", num[i]); ++ if (((i + 1) % 2) == 0) DWC_PRINTF(" "); ++ if (((i + 1) % 26) == 0) DWC_PRINTF("\n"); ++ } ++ ++ DWC_PRINTF("\n"); ++} ++#else ++#define dh_dump(_x...) do {; } while(0) ++#endif ++ ++/* Constant g value */ ++static __u32 dh_g[] = { ++ 0x02000000, ++}; ++ ++/* Constant p value */ ++static __u32 dh_p[] = { ++ 0xFFFFFFFF, 0xFFFFFFFF, 0xA2DA0FC9, 0x34C26821, 0x8B62C6C4, 0xD11CDC80, 0x084E0229, 0x74CC678A, ++ 0xA6BE0B02, 0x229B133B, 0x79084A51, 0xDD04348E, 0xB31995EF, 0x1B433ACD, 0x6D0A2B30, 0x37145FF2, ++ 0x6D35E14F, 0x45C2516D, 0x76B585E4, 0xC67E5E62, 0xE9424CF4, 0x6BED37A6, 0xB65CFF0B, 0xEDB706F4, ++ 0xFB6B38EE, 0xA59F895A, 0x11249FAE, 0xE61F4B7C, 0x51662849, 0x3D5BE4EC, 0xB87C00C2, 0x05BF63A1, ++ 0x3648DA98, 0x9AD3551C, 0xA83F1669, 0x5FCF24FD, 0x235D6583, 0x96ADA3DC, 0x56F3621C, 0xBB528520, ++ 0x0729D59E, 0x6D969670, 0x4E350C67, 0x0498BC4A, 0x086C74F1, 0x7C2118CA, 0x465E9032, 0x3BCE362E, ++ 0x2C779EE3, 0x03860E18, 0xA283279B, 0x8FA207EC, 0xF05DC5B5, 0xC9524C6F, 0xF6CB2BDE, 0x18175895, ++ 0x7C499539, 0xE56A95EA, 0x1826D215, 0x1005FA98, 0x5A8E7215, 0x2DC4AA8A, 0x0D1733AD, 0x337A5004, ++ 0xAB2155A8, 0x64BA1CDF, 0x0485FBEC, 0x0AEFDB58, 0x5771EA8A, 0x7D0C065D, 0x850F97B3, 0xC7E4E1A6, ++ 0x8CAEF5AB, 0xD73309DB, 0xE0948C1E, 0x9D61254A, 0x26D2E3CE, 0x6BEED21A, 0x06FA2FF1, 0x64088AD9, ++ 0x730276D8, 0x646AC83E, 0x182B1F52, 0x0C207B17, 0x5717E1BB, 0x6C5D617A, 0xC0880977, 0xE246D9BA, ++ 0xA04FE208, 0x31ABE574, 0xFC5BDB43, 0x8E10FDE0, 0x20D1824B, 0xCAD23AA9, 0xFFFFFFFF, 0xFFFFFFFF, ++}; ++ ++static void dh_swap_bytes(void *_in, void *_out, uint32_t len) ++{ ++ uint8_t *in = _in; ++ uint8_t *out = _out; ++ int i; ++ for (i=0; inext = (link); \ ++ (link)->prev = (link); \ ++} while (0) ++ ++#define DWC_LIST_FIRST(link) ((link)->next) ++#define DWC_LIST_LAST(link) ((link)->prev) ++#define DWC_LIST_END(link) (link) ++#define DWC_LIST_NEXT(link) ((link)->next) ++#define DWC_LIST_PREV(link) ((link)->prev) ++#define DWC_LIST_EMPTY(link) \ ++ (DWC_LIST_FIRST(link) == DWC_LIST_END(link)) ++#define DWC_LIST_ENTRY(link, type, field) \ ++ (type *)((uint8_t *)(link) - (size_t)(&((type *)0)->field)) ++ ++#if 0 ++#define DWC_LIST_INSERT_HEAD(list, link) do { \ ++ (link)->next = (list)->next; \ ++ (link)->prev = (list); \ ++ (list)->next->prev = (link); \ ++ (list)->next = (link); \ ++} while (0) ++ ++#define DWC_LIST_INSERT_TAIL(list, link) do { \ ++ (link)->next = (list); \ ++ (link)->prev = (list)->prev; \ ++ (list)->prev->next = (link); \ ++ (list)->prev = (link); \ ++} while (0) ++#else ++#define DWC_LIST_INSERT_HEAD(list, link) do { \ ++ dwc_list_link_t *__next__ = (list)->next; \ ++ __next__->prev = (link); \ ++ (link)->next = __next__; \ ++ (link)->prev = (list); \ ++ (list)->next = (link); \ ++} while (0) ++ ++#define DWC_LIST_INSERT_TAIL(list, link) do { \ ++ dwc_list_link_t *__prev__ = (list)->prev; \ ++ (list)->prev = (link); \ ++ (link)->next = (list); \ ++ (link)->prev = __prev__; \ ++ __prev__->next = (link); \ ++} while (0) ++#endif ++ ++#if 0 ++static inline void __list_add(struct list_head *new, ++ struct list_head *prev, ++ struct list_head *next) ++{ ++ next->prev = new; ++ new->next = next; ++ new->prev = prev; ++ prev->next = new; ++} ++ ++static inline void list_add(struct list_head *new, struct list_head *head) ++{ ++ __list_add(new, head, head->next); ++} ++ ++static inline void list_add_tail(struct list_head *new, struct list_head *head) ++{ ++ __list_add(new, head->prev, head); ++} ++ ++static inline void __list_del(struct list_head * prev, struct list_head * next) ++{ ++ next->prev = prev; ++ prev->next = next; ++} ++ ++static inline void list_del(struct list_head *entry) ++{ ++ __list_del(entry->prev, entry->next); ++ entry->next = LIST_POISON1; ++ entry->prev = LIST_POISON2; ++} ++#endif ++ ++#define DWC_LIST_REMOVE(link) do { \ ++ (link)->next->prev = (link)->prev; \ ++ (link)->prev->next = (link)->next; \ ++} while (0) ++ ++#define DWC_LIST_REMOVE_INIT(link) do { \ ++ DWC_LIST_REMOVE(link); \ ++ DWC_LIST_INIT(link); \ ++} while (0) ++ ++#define DWC_LIST_MOVE_HEAD(list, link) do { \ ++ DWC_LIST_REMOVE(link); \ ++ DWC_LIST_INSERT_HEAD(list, link); \ ++} while (0) ++ ++#define DWC_LIST_MOVE_TAIL(list, link) do { \ ++ DWC_LIST_REMOVE(link); \ ++ DWC_LIST_INSERT_TAIL(list, link); \ ++} while (0) ++ ++#define DWC_LIST_FOREACH(var, list) \ ++ for((var) = DWC_LIST_FIRST(list); \ ++ (var) != DWC_LIST_END(list); \ ++ (var) = DWC_LIST_NEXT(var)) ++ ++#define DWC_LIST_FOREACH_SAFE(var, var2, list) \ ++ for((var) = DWC_LIST_FIRST(list), (var2) = DWC_LIST_NEXT(var); \ ++ (var) != DWC_LIST_END(list); \ ++ (var) = (var2), (var2) = DWC_LIST_NEXT(var2)) ++ ++#define DWC_LIST_FOREACH_REVERSE(var, list) \ ++ for((var) = DWC_LIST_LAST(list); \ ++ (var) != DWC_LIST_END(list); \ ++ (var) = DWC_LIST_PREV(var)) ++ ++/* ++ * Singly-linked List definitions. ++ */ ++#define DWC_SLIST_HEAD(name, type) \ ++struct name { \ ++ struct type *slh_first; /* first element */ \ ++} ++ ++#define DWC_SLIST_HEAD_INITIALIZER(head) \ ++ { NULL } ++ ++#define DWC_SLIST_ENTRY(type) \ ++struct { \ ++ struct type *sle_next; /* next element */ \ ++} ++ ++/* ++ * Singly-linked List access methods. ++ */ ++#define DWC_SLIST_FIRST(head) ((head)->slh_first) ++#define DWC_SLIST_END(head) NULL ++#define DWC_SLIST_EMPTY(head) (SLIST_FIRST(head) == SLIST_END(head)) ++#define DWC_SLIST_NEXT(elm, field) ((elm)->field.sle_next) ++ ++#define DWC_SLIST_FOREACH(var, head, field) \ ++ for((var) = SLIST_FIRST(head); \ ++ (var) != SLIST_END(head); \ ++ (var) = SLIST_NEXT(var, field)) ++ ++#define DWC_SLIST_FOREACH_PREVPTR(var, varp, head, field) \ ++ for((varp) = &SLIST_FIRST((head)); \ ++ ((var) = *(varp)) != SLIST_END(head); \ ++ (varp) = &SLIST_NEXT((var), field)) ++ ++/* ++ * Singly-linked List functions. ++ */ ++#define DWC_SLIST_INIT(head) { \ ++ SLIST_FIRST(head) = SLIST_END(head); \ ++} ++ ++#define DWC_SLIST_INSERT_AFTER(slistelm, elm, field) do { \ ++ (elm)->field.sle_next = (slistelm)->field.sle_next; \ ++ (slistelm)->field.sle_next = (elm); \ ++} while (0) ++ ++#define DWC_SLIST_INSERT_HEAD(head, elm, field) do { \ ++ (elm)->field.sle_next = (head)->slh_first; \ ++ (head)->slh_first = (elm); \ ++} while (0) ++ ++#define DWC_SLIST_REMOVE_NEXT(head, elm, field) do { \ ++ (elm)->field.sle_next = (elm)->field.sle_next->field.sle_next; \ ++} while (0) ++ ++#define DWC_SLIST_REMOVE_HEAD(head, field) do { \ ++ (head)->slh_first = (head)->slh_first->field.sle_next; \ ++} while (0) ++ ++#define DWC_SLIST_REMOVE(head, elm, type, field) do { \ ++ if ((head)->slh_first == (elm)) { \ ++ SLIST_REMOVE_HEAD((head), field); \ ++ } \ ++ else { \ ++ struct type *curelm = (head)->slh_first; \ ++ while( curelm->field.sle_next != (elm) ) \ ++ curelm = curelm->field.sle_next; \ ++ curelm->field.sle_next = \ ++ curelm->field.sle_next->field.sle_next; \ ++ } \ ++} while (0) ++ ++/* ++ * Simple queue definitions. ++ */ ++#define DWC_SIMPLEQ_HEAD(name, type) \ ++struct name { \ ++ struct type *sqh_first; /* first element */ \ ++ struct type **sqh_last; /* addr of last next element */ \ ++} ++ ++#define DWC_SIMPLEQ_HEAD_INITIALIZER(head) \ ++ { NULL, &(head).sqh_first } ++ ++#define DWC_SIMPLEQ_ENTRY(type) \ ++struct { \ ++ struct type *sqe_next; /* next element */ \ ++} ++ ++/* ++ * Simple queue access methods. ++ */ ++#define DWC_SIMPLEQ_FIRST(head) ((head)->sqh_first) ++#define DWC_SIMPLEQ_END(head) NULL ++#define DWC_SIMPLEQ_EMPTY(head) (SIMPLEQ_FIRST(head) == SIMPLEQ_END(head)) ++#define DWC_SIMPLEQ_NEXT(elm, field) ((elm)->field.sqe_next) ++ ++#define DWC_SIMPLEQ_FOREACH(var, head, field) \ ++ for((var) = SIMPLEQ_FIRST(head); \ ++ (var) != SIMPLEQ_END(head); \ ++ (var) = SIMPLEQ_NEXT(var, field)) ++ ++/* ++ * Simple queue functions. ++ */ ++#define DWC_SIMPLEQ_INIT(head) do { \ ++ (head)->sqh_first = NULL; \ ++ (head)->sqh_last = &(head)->sqh_first; \ ++} while (0) ++ ++#define DWC_SIMPLEQ_INSERT_HEAD(head, elm, field) do { \ ++ if (((elm)->field.sqe_next = (head)->sqh_first) == NULL) \ ++ (head)->sqh_last = &(elm)->field.sqe_next; \ ++ (head)->sqh_first = (elm); \ ++} while (0) ++ ++#define DWC_SIMPLEQ_INSERT_TAIL(head, elm, field) do { \ ++ (elm)->field.sqe_next = NULL; \ ++ *(head)->sqh_last = (elm); \ ++ (head)->sqh_last = &(elm)->field.sqe_next; \ ++} while (0) ++ ++#define DWC_SIMPLEQ_INSERT_AFTER(head, listelm, elm, field) do { \ ++ if (((elm)->field.sqe_next = (listelm)->field.sqe_next) == NULL)\ ++ (head)->sqh_last = &(elm)->field.sqe_next; \ ++ (listelm)->field.sqe_next = (elm); \ ++} while (0) ++ ++#define DWC_SIMPLEQ_REMOVE_HEAD(head, field) do { \ ++ if (((head)->sqh_first = (head)->sqh_first->field.sqe_next) == NULL) \ ++ (head)->sqh_last = &(head)->sqh_first; \ ++} while (0) ++ ++/* ++ * Tail queue definitions. ++ */ ++#define DWC_TAILQ_HEAD(name, type) \ ++struct name { \ ++ struct type *tqh_first; /* first element */ \ ++ struct type **tqh_last; /* addr of last next element */ \ ++} ++ ++#define DWC_TAILQ_HEAD_INITIALIZER(head) \ ++ { NULL, &(head).tqh_first } ++ ++#define DWC_TAILQ_ENTRY(type) \ ++struct { \ ++ struct type *tqe_next; /* next element */ \ ++ struct type **tqe_prev; /* address of previous next element */ \ ++} ++ ++/* ++ * tail queue access methods ++ */ ++#define DWC_TAILQ_FIRST(head) ((head)->tqh_first) ++#define DWC_TAILQ_END(head) NULL ++#define DWC_TAILQ_NEXT(elm, field) ((elm)->field.tqe_next) ++#define DWC_TAILQ_LAST(head, headname) \ ++ (*(((struct headname *)((head)->tqh_last))->tqh_last)) ++/* XXX */ ++#define DWC_TAILQ_PREV(elm, headname, field) \ ++ (*(((struct headname *)((elm)->field.tqe_prev))->tqh_last)) ++#define DWC_TAILQ_EMPTY(head) \ ++ (DWC_TAILQ_FIRST(head) == DWC_TAILQ_END(head)) ++ ++#define DWC_TAILQ_FOREACH(var, head, field) \ ++ for ((var) = DWC_TAILQ_FIRST(head); \ ++ (var) != DWC_TAILQ_END(head); \ ++ (var) = DWC_TAILQ_NEXT(var, field)) ++ ++#define DWC_TAILQ_FOREACH_REVERSE(var, head, headname, field) \ ++ for ((var) = DWC_TAILQ_LAST(head, headname); \ ++ (var) != DWC_TAILQ_END(head); \ ++ (var) = DWC_TAILQ_PREV(var, headname, field)) ++ ++/* ++ * Tail queue functions. ++ */ ++#define DWC_TAILQ_INIT(head) do { \ ++ (head)->tqh_first = NULL; \ ++ (head)->tqh_last = &(head)->tqh_first; \ ++} while (0) ++ ++#define DWC_TAILQ_INSERT_HEAD(head, elm, field) do { \ ++ if (((elm)->field.tqe_next = (head)->tqh_first) != NULL) \ ++ (head)->tqh_first->field.tqe_prev = \ ++ &(elm)->field.tqe_next; \ ++ else \ ++ (head)->tqh_last = &(elm)->field.tqe_next; \ ++ (head)->tqh_first = (elm); \ ++ (elm)->field.tqe_prev = &(head)->tqh_first; \ ++} while (0) ++ ++#define DWC_TAILQ_INSERT_TAIL(head, elm, field) do { \ ++ (elm)->field.tqe_next = NULL; \ ++ (elm)->field.tqe_prev = (head)->tqh_last; \ ++ *(head)->tqh_last = (elm); \ ++ (head)->tqh_last = &(elm)->field.tqe_next; \ ++} while (0) ++ ++#define DWC_TAILQ_INSERT_AFTER(head, listelm, elm, field) do { \ ++ if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\ ++ (elm)->field.tqe_next->field.tqe_prev = \ ++ &(elm)->field.tqe_next; \ ++ else \ ++ (head)->tqh_last = &(elm)->field.tqe_next; \ ++ (listelm)->field.tqe_next = (elm); \ ++ (elm)->field.tqe_prev = &(listelm)->field.tqe_next; \ ++} while (0) ++ ++#define DWC_TAILQ_INSERT_BEFORE(listelm, elm, field) do { \ ++ (elm)->field.tqe_prev = (listelm)->field.tqe_prev; \ ++ (elm)->field.tqe_next = (listelm); \ ++ *(listelm)->field.tqe_prev = (elm); \ ++ (listelm)->field.tqe_prev = &(elm)->field.tqe_next; \ ++} while (0) ++ ++#define DWC_TAILQ_REMOVE(head, elm, field) do { \ ++ if (((elm)->field.tqe_next) != NULL) \ ++ (elm)->field.tqe_next->field.tqe_prev = \ ++ (elm)->field.tqe_prev; \ ++ else \ ++ (head)->tqh_last = (elm)->field.tqe_prev; \ ++ *(elm)->field.tqe_prev = (elm)->field.tqe_next; \ ++} while (0) ++ ++#define DWC_TAILQ_REPLACE(head, elm, elm2, field) do { \ ++ if (((elm2)->field.tqe_next = (elm)->field.tqe_next) != NULL) \ ++ (elm2)->field.tqe_next->field.tqe_prev = \ ++ &(elm2)->field.tqe_next; \ ++ else \ ++ (head)->tqh_last = &(elm2)->field.tqe_next; \ ++ (elm2)->field.tqe_prev = (elm)->field.tqe_prev; \ ++ *(elm2)->field.tqe_prev = (elm2); \ ++} while (0) ++ ++/* ++ * Circular queue definitions. ++ */ ++#define DWC_CIRCLEQ_HEAD(name, type) \ ++struct name { \ ++ struct type *cqh_first; /* first element */ \ ++ struct type *cqh_last; /* last element */ \ ++} ++ ++#define DWC_CIRCLEQ_HEAD_INITIALIZER(head) \ ++ { DWC_CIRCLEQ_END(&head), DWC_CIRCLEQ_END(&head) } ++ ++#define DWC_CIRCLEQ_ENTRY(type) \ ++struct { \ ++ struct type *cqe_next; /* next element */ \ ++ struct type *cqe_prev; /* previous element */ \ ++} ++ ++/* ++ * Circular queue access methods ++ */ ++#define DWC_CIRCLEQ_FIRST(head) ((head)->cqh_first) ++#define DWC_CIRCLEQ_LAST(head) ((head)->cqh_last) ++#define DWC_CIRCLEQ_END(head) ((void *)(head)) ++#define DWC_CIRCLEQ_NEXT(elm, field) ((elm)->field.cqe_next) ++#define DWC_CIRCLEQ_PREV(elm, field) ((elm)->field.cqe_prev) ++#define DWC_CIRCLEQ_EMPTY(head) \ ++ (DWC_CIRCLEQ_FIRST(head) == DWC_CIRCLEQ_END(head)) ++ ++#define DWC_CIRCLEQ_EMPTY_ENTRY(elm, field) (((elm)->field.cqe_next == NULL) && ((elm)->field.cqe_prev == NULL)) ++ ++#define DWC_CIRCLEQ_FOREACH(var, head, field) \ ++ for((var) = DWC_CIRCLEQ_FIRST(head); \ ++ (var) != DWC_CIRCLEQ_END(head); \ ++ (var) = DWC_CIRCLEQ_NEXT(var, field)) ++ ++#define DWC_CIRCLEQ_FOREACH_SAFE(var, var2, head, field) \ ++ for((var) = DWC_CIRCLEQ_FIRST(head), var2 = DWC_CIRCLEQ_NEXT(var, field); \ ++ (var) != DWC_CIRCLEQ_END(head); \ ++ (var) = var2, var2 = DWC_CIRCLEQ_NEXT(var, field)) ++ ++#define DWC_CIRCLEQ_FOREACH_REVERSE(var, head, field) \ ++ for((var) = DWC_CIRCLEQ_LAST(head); \ ++ (var) != DWC_CIRCLEQ_END(head); \ ++ (var) = DWC_CIRCLEQ_PREV(var, field)) ++ ++/* ++ * Circular queue functions. ++ */ ++#define DWC_CIRCLEQ_INIT(head) do { \ ++ (head)->cqh_first = DWC_CIRCLEQ_END(head); \ ++ (head)->cqh_last = DWC_CIRCLEQ_END(head); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INIT_ENTRY(elm, field) do { \ ++ (elm)->field.cqe_next = NULL; \ ++ (elm)->field.cqe_prev = NULL; \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) do { \ ++ (elm)->field.cqe_next = (listelm)->field.cqe_next; \ ++ (elm)->field.cqe_prev = (listelm); \ ++ if ((listelm)->field.cqe_next == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_last = (elm); \ ++ else \ ++ (listelm)->field.cqe_next->field.cqe_prev = (elm); \ ++ (listelm)->field.cqe_next = (elm); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) do { \ ++ (elm)->field.cqe_next = (listelm); \ ++ (elm)->field.cqe_prev = (listelm)->field.cqe_prev; \ ++ if ((listelm)->field.cqe_prev == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_first = (elm); \ ++ else \ ++ (listelm)->field.cqe_prev->field.cqe_next = (elm); \ ++ (listelm)->field.cqe_prev = (elm); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INSERT_HEAD(head, elm, field) do { \ ++ (elm)->field.cqe_next = (head)->cqh_first; \ ++ (elm)->field.cqe_prev = DWC_CIRCLEQ_END(head); \ ++ if ((head)->cqh_last == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_last = (elm); \ ++ else \ ++ (head)->cqh_first->field.cqe_prev = (elm); \ ++ (head)->cqh_first = (elm); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_INSERT_TAIL(head, elm, field) do { \ ++ (elm)->field.cqe_next = DWC_CIRCLEQ_END(head); \ ++ (elm)->field.cqe_prev = (head)->cqh_last; \ ++ if ((head)->cqh_first == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_first = (elm); \ ++ else \ ++ (head)->cqh_last->field.cqe_next = (elm); \ ++ (head)->cqh_last = (elm); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_REMOVE(head, elm, field) do { \ ++ if ((elm)->field.cqe_next == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_last = (elm)->field.cqe_prev; \ ++ else \ ++ (elm)->field.cqe_next->field.cqe_prev = \ ++ (elm)->field.cqe_prev; \ ++ if ((elm)->field.cqe_prev == DWC_CIRCLEQ_END(head)) \ ++ (head)->cqh_first = (elm)->field.cqe_next; \ ++ else \ ++ (elm)->field.cqe_prev->field.cqe_next = \ ++ (elm)->field.cqe_next; \ ++} while (0) ++ ++#define DWC_CIRCLEQ_REMOVE_INIT(head, elm, field) do { \ ++ DWC_CIRCLEQ_REMOVE(head, elm, field); \ ++ DWC_CIRCLEQ_INIT_ENTRY(elm, field); \ ++} while (0) ++ ++#define DWC_CIRCLEQ_REPLACE(head, elm, elm2, field) do { \ ++ if (((elm2)->field.cqe_next = (elm)->field.cqe_next) == \ ++ DWC_CIRCLEQ_END(head)) \ ++ (head).cqh_last = (elm2); \ ++ else \ ++ (elm2)->field.cqe_next->field.cqe_prev = (elm2); \ ++ if (((elm2)->field.cqe_prev = (elm)->field.cqe_prev) == \ ++ DWC_CIRCLEQ_END(head)) \ ++ (head).cqh_first = (elm2); \ ++ else \ ++ (elm2)->field.cqe_prev->field.cqe_next = (elm2); \ ++} while (0) ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _DWC_LIST_H_ */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_mem.c +@@ -0,0 +1,245 @@ ++/* Memory Debugging */ ++#ifdef DWC_DEBUG_MEMORY ++ ++#include "dwc_os.h" ++#include "dwc_list.h" ++ ++struct allocation { ++ void *addr; ++ void *ctx; ++ char *func; ++ int line; ++ uint32_t size; ++ int dma; ++ DWC_CIRCLEQ_ENTRY(allocation) entry; ++}; ++ ++DWC_CIRCLEQ_HEAD(allocation_queue, allocation); ++ ++struct allocation_manager { ++ void *mem_ctx; ++ struct allocation_queue allocations; ++ ++ /* statistics */ ++ int num; ++ int num_freed; ++ int num_active; ++ uint32_t total; ++ uint32_t cur; ++ uint32_t max; ++}; ++ ++static struct allocation_manager *manager = NULL; ++ ++static int add_allocation(void *ctx, uint32_t size, char const *func, int line, void *addr, ++ int dma) ++{ ++ struct allocation *a; ++ ++ DWC_ASSERT(manager != NULL, "manager not allocated"); ++ ++ a = __DWC_ALLOC_ATOMIC(manager->mem_ctx, sizeof(*a)); ++ if (!a) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ a->func = __DWC_ALLOC_ATOMIC(manager->mem_ctx, DWC_STRLEN(func) + 1); ++ if (!a->func) { ++ __DWC_FREE(manager->mem_ctx, a); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ DWC_MEMCPY(a->func, func, DWC_STRLEN(func) + 1); ++ a->addr = addr; ++ a->ctx = ctx; ++ a->line = line; ++ a->size = size; ++ a->dma = dma; ++ DWC_CIRCLEQ_INSERT_TAIL(&manager->allocations, a, entry); ++ ++ /* Update stats */ ++ manager->num++; ++ manager->num_active++; ++ manager->total += size; ++ manager->cur += size; ++ ++ if (manager->max < manager->cur) { ++ manager->max = manager->cur; ++ } ++ ++ return 0; ++} ++ ++static struct allocation *find_allocation(void *ctx, void *addr) ++{ ++ struct allocation *a; ++ ++ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { ++ if (a->ctx == ctx && a->addr == addr) { ++ return a; ++ } ++ } ++ ++ return NULL; ++} ++ ++static void free_allocation(void *ctx, void *addr, char const *func, int line) ++{ ++ struct allocation *a = find_allocation(ctx, addr); ++ ++ if (!a) { ++ DWC_ASSERT(0, ++ "Free of address %p that was never allocated or already freed %s:%d", ++ addr, func, line); ++ return; ++ } ++ ++ DWC_CIRCLEQ_REMOVE(&manager->allocations, a, entry); ++ ++ manager->num_active--; ++ manager->num_freed++; ++ manager->cur -= a->size; ++ __DWC_FREE(manager->mem_ctx, a->func); ++ __DWC_FREE(manager->mem_ctx, a); ++} ++ ++int dwc_memory_debug_start(void *mem_ctx) ++{ ++ DWC_ASSERT(manager == NULL, "Memory debugging has already started\n"); ++ ++ if (manager) { ++ return -DWC_E_BUSY; ++ } ++ ++ manager = __DWC_ALLOC(mem_ctx, sizeof(*manager)); ++ if (!manager) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ DWC_CIRCLEQ_INIT(&manager->allocations); ++ manager->mem_ctx = mem_ctx; ++ manager->num = 0; ++ manager->num_freed = 0; ++ manager->num_active = 0; ++ manager->total = 0; ++ manager->cur = 0; ++ manager->max = 0; ++ ++ return 0; ++} ++ ++void dwc_memory_debug_stop(void) ++{ ++ struct allocation *a; ++ ++ dwc_memory_debug_report(); ++ ++ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { ++ DWC_ERROR("Memory leaked from %s:%d\n", a->func, a->line); ++ free_allocation(a->ctx, a->addr, NULL, -1); ++ } ++ ++ __DWC_FREE(manager->mem_ctx, manager); ++} ++ ++void dwc_memory_debug_report(void) ++{ ++ struct allocation *a; ++ ++ DWC_PRINTF("\n\n\n----------------- Memory Debugging Report -----------------\n\n"); ++ DWC_PRINTF("Num Allocations = %d\n", manager->num); ++ DWC_PRINTF("Freed = %d\n", manager->num_freed); ++ DWC_PRINTF("Active = %d\n", manager->num_active); ++ DWC_PRINTF("Current Memory Used = %d\n", manager->cur); ++ DWC_PRINTF("Total Memory Used = %d\n", manager->total); ++ DWC_PRINTF("Maximum Memory Used at Once = %d\n", manager->max); ++ DWC_PRINTF("Unfreed allocations:\n"); ++ ++ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { ++ DWC_PRINTF(" addr=%p, size=%d from %s:%d, DMA=%d\n", ++ a->addr, a->size, a->func, a->line, a->dma); ++ } ++} ++ ++/* The replacement functions */ ++void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line) ++{ ++ void *addr = __DWC_ALLOC(mem_ctx, size); ++ ++ if (!addr) { ++ return NULL; ++ } ++ ++ if (add_allocation(mem_ctx, size, func, line, addr, 0)) { ++ __DWC_FREE(mem_ctx, addr); ++ return NULL; ++ } ++ ++ return addr; ++} ++ ++void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func, ++ int line) ++{ ++ void *addr = __DWC_ALLOC_ATOMIC(mem_ctx, size); ++ ++ if (!addr) { ++ return NULL; ++ } ++ ++ if (add_allocation(mem_ctx, size, func, line, addr, 0)) { ++ __DWC_FREE(mem_ctx, addr); ++ return NULL; ++ } ++ ++ return addr; ++} ++ ++void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line) ++{ ++ free_allocation(mem_ctx, addr, func, line); ++ __DWC_FREE(mem_ctx, addr); ++} ++ ++void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr, ++ char const *func, int line) ++{ ++ void *addr = __DWC_DMA_ALLOC(dma_ctx, size, dma_addr); ++ ++ if (!addr) { ++ return NULL; ++ } ++ ++ if (add_allocation(dma_ctx, size, func, line, addr, 1)) { ++ __DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr); ++ return NULL; ++ } ++ ++ return addr; ++} ++ ++void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size, ++ dwc_dma_t *dma_addr, char const *func, int line) ++{ ++ void *addr = __DWC_DMA_ALLOC_ATOMIC(dma_ctx, size, dma_addr); ++ ++ if (!addr) { ++ return NULL; ++ } ++ ++ if (add_allocation(dma_ctx, size, func, line, addr, 1)) { ++ __DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr); ++ return NULL; ++ } ++ ++ return addr; ++} ++ ++void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr, ++ dwc_dma_t dma_addr, char const *func, int line) ++{ ++ free_allocation(dma_ctx, virt_addr, func, line); ++ __DWC_DMA_FREE(dma_ctx, size, virt_addr, dma_addr); ++} ++ ++#endif /* DWC_DEBUG_MEMORY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_modpow.c +@@ -0,0 +1,636 @@ ++/* Bignum routines adapted from PUTTY sources. PuTTY copyright notice follows. ++ * ++ * PuTTY is copyright 1997-2007 Simon Tatham. ++ * ++ * Portions copyright Robert de Bath, Joris van Rantwijk, Delian ++ * Delchev, Andreas Schultz, Jeroen Massar, Wez Furlong, Nicolas Barry, ++ * Justin Bradford, Ben Harris, Malcolm Smith, Ahmad Khalifa, Markus ++ * Kuhn, and CORE SDI S.A. ++ * ++ * Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation files ++ * (the "Software"), to deal in the Software without restriction, ++ * including without limitation the rights to use, copy, modify, merge, ++ * publish, distribute, sublicense, and/or sell copies of the Software, ++ * and to permit persons to whom the Software is furnished to do so, ++ * subject to the following conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE ++ * FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF ++ * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION ++ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. ++ * ++ */ ++#ifdef DWC_CRYPTOLIB ++ ++#ifndef CONFIG_MACH_IPMATE ++ ++#include "dwc_modpow.h" ++ ++#define BIGNUM_INT_MASK 0xFFFFFFFFUL ++#define BIGNUM_TOP_BIT 0x80000000UL ++#define BIGNUM_INT_BITS 32 ++ ++ ++static void *snmalloc(void *mem_ctx, size_t n, size_t size) ++{ ++ void *p; ++ size *= n; ++ if (size == 0) size = 1; ++ p = dwc_alloc(mem_ctx, size); ++ return p; ++} ++ ++#define snewn(ctx, n, type) ((type *)snmalloc((ctx), (n), sizeof(type))) ++#define sfree dwc_free ++ ++/* ++ * Usage notes: ++ * * Do not call the DIVMOD_WORD macro with expressions such as array ++ * subscripts, as some implementations object to this (see below). ++ * * Note that none of the division methods below will cope if the ++ * quotient won't fit into BIGNUM_INT_BITS. Callers should be careful ++ * to avoid this case. ++ * If this condition occurs, in the case of the x86 DIV instruction, ++ * an overflow exception will occur, which (according to a correspondent) ++ * will manifest on Windows as something like ++ * 0xC0000095: Integer overflow ++ * The C variant won't give the right answer, either. ++ */ ++ ++#define MUL_WORD(w1, w2) ((BignumDblInt)w1 * w2) ++ ++#if defined __GNUC__ && defined __i386__ ++#define DIVMOD_WORD(q, r, hi, lo, w) \ ++ __asm__("div %2" : \ ++ "=d" (r), "=a" (q) : \ ++ "r" (w), "d" (hi), "a" (lo)) ++#else ++#define DIVMOD_WORD(q, r, hi, lo, w) do { \ ++ BignumDblInt n = (((BignumDblInt)hi) << BIGNUM_INT_BITS) | lo; \ ++ q = n / w; \ ++ r = n % w; \ ++} while (0) ++#endif ++ ++// q = n / w; ++// r = n % w; ++ ++#define BIGNUM_INT_BYTES (BIGNUM_INT_BITS / 8) ++ ++#define BIGNUM_INTERNAL ++ ++static Bignum newbn(void *mem_ctx, int length) ++{ ++ Bignum b = snewn(mem_ctx, length + 1, BignumInt); ++ //if (!b) ++ //abort(); /* FIXME */ ++ DWC_MEMSET(b, 0, (length + 1) * sizeof(*b)); ++ b[0] = length; ++ return b; ++} ++ ++void freebn(void *mem_ctx, Bignum b) ++{ ++ /* ++ * Burn the evidence, just in case. ++ */ ++ DWC_MEMSET(b, 0, sizeof(b[0]) * (b[0] + 1)); ++ sfree(mem_ctx, b); ++} ++ ++/* ++ * Compute c = a * b. ++ * Input is in the first len words of a and b. ++ * Result is returned in the first 2*len words of c. ++ */ ++static void internal_mul(BignumInt *a, BignumInt *b, ++ BignumInt *c, int len) ++{ ++ int i, j; ++ BignumDblInt t; ++ ++ for (j = 0; j < 2 * len; j++) ++ c[j] = 0; ++ ++ for (i = len - 1; i >= 0; i--) { ++ t = 0; ++ for (j = len - 1; j >= 0; j--) { ++ t += MUL_WORD(a[i], (BignumDblInt) b[j]); ++ t += (BignumDblInt) c[i + j + 1]; ++ c[i + j + 1] = (BignumInt) t; ++ t = t >> BIGNUM_INT_BITS; ++ } ++ c[i] = (BignumInt) t; ++ } ++} ++ ++static void internal_add_shifted(BignumInt *number, ++ unsigned n, int shift) ++{ ++ int word = 1 + (shift / BIGNUM_INT_BITS); ++ int bshift = shift % BIGNUM_INT_BITS; ++ BignumDblInt addend; ++ ++ addend = (BignumDblInt)n << bshift; ++ ++ while (addend) { ++ addend += number[word]; ++ number[word] = (BignumInt) addend & BIGNUM_INT_MASK; ++ addend >>= BIGNUM_INT_BITS; ++ word++; ++ } ++} ++ ++/* ++ * Compute a = a % m. ++ * Input in first alen words of a and first mlen words of m. ++ * Output in first alen words of a ++ * (of which first alen-mlen words will be zero). ++ * The MSW of m MUST have its high bit set. ++ * Quotient is accumulated in the `quotient' array, which is a Bignum ++ * rather than the internal bigendian format. Quotient parts are shifted ++ * left by `qshift' before adding into quot. ++ */ ++static void internal_mod(BignumInt *a, int alen, ++ BignumInt *m, int mlen, ++ BignumInt *quot, int qshift) ++{ ++ BignumInt m0, m1; ++ unsigned int h; ++ int i, k; ++ ++ m0 = m[0]; ++ if (mlen > 1) ++ m1 = m[1]; ++ else ++ m1 = 0; ++ ++ for (i = 0; i <= alen - mlen; i++) { ++ BignumDblInt t; ++ unsigned int q, r, c, ai1; ++ ++ if (i == 0) { ++ h = 0; ++ } else { ++ h = a[i - 1]; ++ a[i - 1] = 0; ++ } ++ ++ if (i == alen - 1) ++ ai1 = 0; ++ else ++ ai1 = a[i + 1]; ++ ++ /* Find q = h:a[i] / m0 */ ++ if (h >= m0) { ++ /* ++ * Special case. ++ * ++ * To illustrate it, suppose a BignumInt is 8 bits, and ++ * we are dividing (say) A1:23:45:67 by A1:B2:C3. Then ++ * our initial division will be 0xA123 / 0xA1, which ++ * will give a quotient of 0x100 and a divide overflow. ++ * However, the invariants in this division algorithm ++ * are not violated, since the full number A1:23:... is ++ * _less_ than the quotient prefix A1:B2:... and so the ++ * following correction loop would have sorted it out. ++ * ++ * In this situation we set q to be the largest ++ * quotient we _can_ stomach (0xFF, of course). ++ */ ++ q = BIGNUM_INT_MASK; ++ } else { ++ /* Macro doesn't want an array subscript expression passed ++ * into it (see definition), so use a temporary. */ ++ BignumInt tmplo = a[i]; ++ DIVMOD_WORD(q, r, h, tmplo, m0); ++ ++ /* Refine our estimate of q by looking at ++ h:a[i]:a[i+1] / m0:m1 */ ++ t = MUL_WORD(m1, q); ++ if (t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) { ++ q--; ++ t -= m1; ++ r = (r + m0) & BIGNUM_INT_MASK; /* overflow? */ ++ if (r >= (BignumDblInt) m0 && ++ t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) q--; ++ } ++ } ++ ++ /* Subtract q * m from a[i...] */ ++ c = 0; ++ for (k = mlen - 1; k >= 0; k--) { ++ t = MUL_WORD(q, m[k]); ++ t += c; ++ c = (unsigned)(t >> BIGNUM_INT_BITS); ++ if ((BignumInt) t > a[i + k]) ++ c++; ++ a[i + k] -= (BignumInt) t; ++ } ++ ++ /* Add back m in case of borrow */ ++ if (c != h) { ++ t = 0; ++ for (k = mlen - 1; k >= 0; k--) { ++ t += m[k]; ++ t += a[i + k]; ++ a[i + k] = (BignumInt) t; ++ t = t >> BIGNUM_INT_BITS; ++ } ++ q--; ++ } ++ if (quot) ++ internal_add_shifted(quot, q, qshift + BIGNUM_INT_BITS * (alen - mlen - i)); ++ } ++} ++ ++/* ++ * Compute p % mod. ++ * The most significant word of mod MUST be non-zero. ++ * We assume that the result array is the same size as the mod array. ++ * We optionally write out a quotient if `quotient' is non-NULL. ++ * We can avoid writing out the result if `result' is NULL. ++ */ ++void bigdivmod(void *mem_ctx, Bignum p, Bignum mod, Bignum result, Bignum quotient) ++{ ++ BignumInt *n, *m; ++ int mshift; ++ int plen, mlen, i, j; ++ ++ /* Allocate m of size mlen, copy mod to m */ ++ /* We use big endian internally */ ++ mlen = mod[0]; ++ m = snewn(mem_ctx, mlen, BignumInt); ++ //if (!m) ++ //abort(); /* FIXME */ ++ for (j = 0; j < mlen; j++) ++ m[j] = mod[mod[0] - j]; ++ ++ /* Shift m left to make msb bit set */ ++ for (mshift = 0; mshift < BIGNUM_INT_BITS-1; mshift++) ++ if ((m[0] << mshift) & BIGNUM_TOP_BIT) ++ break; ++ if (mshift) { ++ for (i = 0; i < mlen - 1; i++) ++ m[i] = (m[i] << mshift) | (m[i + 1] >> (BIGNUM_INT_BITS - mshift)); ++ m[mlen - 1] = m[mlen - 1] << mshift; ++ } ++ ++ plen = p[0]; ++ /* Ensure plen > mlen */ ++ if (plen <= mlen) ++ plen = mlen + 1; ++ ++ /* Allocate n of size plen, copy p to n */ ++ n = snewn(mem_ctx, plen, BignumInt); ++ //if (!n) ++ //abort(); /* FIXME */ ++ for (j = 0; j < plen; j++) ++ n[j] = 0; ++ for (j = 1; j <= (int)p[0]; j++) ++ n[plen - j] = p[j]; ++ ++ /* Main computation */ ++ internal_mod(n, plen, m, mlen, quotient, mshift); ++ ++ /* Fixup result in case the modulus was shifted */ ++ if (mshift) { ++ for (i = plen - mlen - 1; i < plen - 1; i++) ++ n[i] = (n[i] << mshift) | (n[i + 1] >> (BIGNUM_INT_BITS - mshift)); ++ n[plen - 1] = n[plen - 1] << mshift; ++ internal_mod(n, plen, m, mlen, quotient, 0); ++ for (i = plen - 1; i >= plen - mlen; i--) ++ n[i] = (n[i] >> mshift) | (n[i - 1] << (BIGNUM_INT_BITS - mshift)); ++ } ++ ++ /* Copy result to buffer */ ++ if (result) { ++ for (i = 1; i <= (int)result[0]; i++) { ++ int j = plen - i; ++ result[i] = j >= 0 ? n[j] : 0; ++ } ++ } ++ ++ /* Free temporary arrays */ ++ for (i = 0; i < mlen; i++) ++ m[i] = 0; ++ sfree(mem_ctx, m); ++ for (i = 0; i < plen; i++) ++ n[i] = 0; ++ sfree(mem_ctx, n); ++} ++ ++/* ++ * Simple remainder. ++ */ ++Bignum bigmod(void *mem_ctx, Bignum a, Bignum b) ++{ ++ Bignum r = newbn(mem_ctx, b[0]); ++ bigdivmod(mem_ctx, a, b, r, NULL); ++ return r; ++} ++ ++/* ++ * Compute (base ^ exp) % mod. ++ */ ++Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod) ++{ ++ BignumInt *a, *b, *n, *m; ++ int mshift; ++ int mlen, i, j; ++ Bignum base, result; ++ ++ /* ++ * The most significant word of mod needs to be non-zero. It ++ * should already be, but let's make sure. ++ */ ++ //assert(mod[mod[0]] != 0); ++ ++ /* ++ * Make sure the base is smaller than the modulus, by reducing ++ * it modulo the modulus if not. ++ */ ++ base = bigmod(mem_ctx, base_in, mod); ++ ++ /* Allocate m of size mlen, copy mod to m */ ++ /* We use big endian internally */ ++ mlen = mod[0]; ++ m = snewn(mem_ctx, mlen, BignumInt); ++ //if (!m) ++ //abort(); /* FIXME */ ++ for (j = 0; j < mlen; j++) ++ m[j] = mod[mod[0] - j]; ++ ++ /* Shift m left to make msb bit set */ ++ for (mshift = 0; mshift < BIGNUM_INT_BITS - 1; mshift++) ++ if ((m[0] << mshift) & BIGNUM_TOP_BIT) ++ break; ++ if (mshift) { ++ for (i = 0; i < mlen - 1; i++) ++ m[i] = ++ (m[i] << mshift) | (m[i + 1] >> ++ (BIGNUM_INT_BITS - mshift)); ++ m[mlen - 1] = m[mlen - 1] << mshift; ++ } ++ ++ /* Allocate n of size mlen, copy base to n */ ++ n = snewn(mem_ctx, mlen, BignumInt); ++ //if (!n) ++ //abort(); /* FIXME */ ++ i = mlen - base[0]; ++ for (j = 0; j < i; j++) ++ n[j] = 0; ++ for (j = 0; j < base[0]; j++) ++ n[i + j] = base[base[0] - j]; ++ ++ /* Allocate a and b of size 2*mlen. Set a = 1 */ ++ a = snewn(mem_ctx, 2 * mlen, BignumInt); ++ //if (!a) ++ //abort(); /* FIXME */ ++ b = snewn(mem_ctx, 2 * mlen, BignumInt); ++ //if (!b) ++ //abort(); /* FIXME */ ++ for (i = 0; i < 2 * mlen; i++) ++ a[i] = 0; ++ a[2 * mlen - 1] = 1; ++ ++ /* Skip leading zero bits of exp. */ ++ i = 0; ++ j = BIGNUM_INT_BITS - 1; ++ while (i < exp[0] && (exp[exp[0] - i] & (1 << j)) == 0) { ++ j--; ++ if (j < 0) { ++ i++; ++ j = BIGNUM_INT_BITS - 1; ++ } ++ } ++ ++ /* Main computation */ ++ while (i < exp[0]) { ++ while (j >= 0) { ++ internal_mul(a + mlen, a + mlen, b, mlen); ++ internal_mod(b, mlen * 2, m, mlen, NULL, 0); ++ if ((exp[exp[0] - i] & (1 << j)) != 0) { ++ internal_mul(b + mlen, n, a, mlen); ++ internal_mod(a, mlen * 2, m, mlen, NULL, 0); ++ } else { ++ BignumInt *t; ++ t = a; ++ a = b; ++ b = t; ++ } ++ j--; ++ } ++ i++; ++ j = BIGNUM_INT_BITS - 1; ++ } ++ ++ /* Fixup result in case the modulus was shifted */ ++ if (mshift) { ++ for (i = mlen - 1; i < 2 * mlen - 1; i++) ++ a[i] = ++ (a[i] << mshift) | (a[i + 1] >> ++ (BIGNUM_INT_BITS - mshift)); ++ a[2 * mlen - 1] = a[2 * mlen - 1] << mshift; ++ internal_mod(a, mlen * 2, m, mlen, NULL, 0); ++ for (i = 2 * mlen - 1; i >= mlen; i--) ++ a[i] = ++ (a[i] >> mshift) | (a[i - 1] << ++ (BIGNUM_INT_BITS - mshift)); ++ } ++ ++ /* Copy result to buffer */ ++ result = newbn(mem_ctx, mod[0]); ++ for (i = 0; i < mlen; i++) ++ result[result[0] - i] = a[i + mlen]; ++ while (result[0] > 1 && result[result[0]] == 0) ++ result[0]--; ++ ++ /* Free temporary arrays */ ++ for (i = 0; i < 2 * mlen; i++) ++ a[i] = 0; ++ sfree(mem_ctx, a); ++ for (i = 0; i < 2 * mlen; i++) ++ b[i] = 0; ++ sfree(mem_ctx, b); ++ for (i = 0; i < mlen; i++) ++ m[i] = 0; ++ sfree(mem_ctx, m); ++ for (i = 0; i < mlen; i++) ++ n[i] = 0; ++ sfree(mem_ctx, n); ++ ++ freebn(mem_ctx, base); ++ ++ return result; ++} ++ ++ ++#ifdef UNITTEST ++ ++static __u32 dh_p[] = { ++ 96, ++ 0xFFFFFFFF, ++ 0xFFFFFFFF, ++ 0xA93AD2CA, ++ 0x4B82D120, ++ 0xE0FD108E, ++ 0x43DB5BFC, ++ 0x74E5AB31, ++ 0x08E24FA0, ++ 0xBAD946E2, ++ 0x770988C0, ++ 0x7A615D6C, ++ 0xBBE11757, ++ 0x177B200C, ++ 0x521F2B18, ++ 0x3EC86A64, ++ 0xD8760273, ++ 0xD98A0864, ++ 0xF12FFA06, ++ 0x1AD2EE6B, ++ 0xCEE3D226, ++ 0x4A25619D, ++ 0x1E8C94E0, ++ 0xDB0933D7, ++ 0xABF5AE8C, ++ 0xA6E1E4C7, ++ 0xB3970F85, ++ 0x5D060C7D, ++ 0x8AEA7157, ++ 0x58DBEF0A, ++ 0xECFB8504, ++ 0xDF1CBA64, ++ 0xA85521AB, ++ 0x04507A33, ++ 0xAD33170D, ++ 0x8AAAC42D, ++ 0x15728E5A, ++ 0x98FA0510, ++ 0x15D22618, ++ 0xEA956AE5, ++ 0x3995497C, ++ 0x95581718, ++ 0xDE2BCBF6, ++ 0x6F4C52C9, ++ 0xB5C55DF0, ++ 0xEC07A28F, ++ 0x9B2783A2, ++ 0x180E8603, ++ 0xE39E772C, ++ 0x2E36CE3B, ++ 0x32905E46, ++ 0xCA18217C, ++ 0xF1746C08, ++ 0x4ABC9804, ++ 0x670C354E, ++ 0x7096966D, ++ 0x9ED52907, ++ 0x208552BB, ++ 0x1C62F356, ++ 0xDCA3AD96, ++ 0x83655D23, ++ 0xFD24CF5F, ++ 0x69163FA8, ++ 0x1C55D39A, ++ 0x98DA4836, ++ 0xA163BF05, ++ 0xC2007CB8, ++ 0xECE45B3D, ++ 0x49286651, ++ 0x7C4B1FE6, ++ 0xAE9F2411, ++ 0x5A899FA5, ++ 0xEE386BFB, ++ 0xF406B7ED, ++ 0x0BFF5CB6, ++ 0xA637ED6B, ++ 0xF44C42E9, ++ 0x625E7EC6, ++ 0xE485B576, ++ 0x6D51C245, ++ 0x4FE1356D, ++ 0xF25F1437, ++ 0x302B0A6D, ++ 0xCD3A431B, ++ 0xEF9519B3, ++ 0x8E3404DD, ++ 0x514A0879, ++ 0x3B139B22, ++ 0x020BBEA6, ++ 0x8A67CC74, ++ 0x29024E08, ++ 0x80DC1CD1, ++ 0xC4C6628B, ++ 0x2168C234, ++ 0xC90FDAA2, ++ 0xFFFFFFFF, ++ 0xFFFFFFFF, ++}; ++ ++static __u32 dh_a[] = { ++ 8, ++ 0xdf367516, ++ 0x86459caa, ++ 0xe2d459a4, ++ 0xd910dae0, ++ 0x8a8b5e37, ++ 0x67ab31c6, ++ 0xf0b55ea9, ++ 0x440051d6, ++}; ++ ++static __u32 dh_b[] = { ++ 8, ++ 0xded92656, ++ 0xe07a048a, ++ 0x6fa452cd, ++ 0x2df89d30, ++ 0xc75f1b0f, ++ 0x8ce3578f, ++ 0x7980a324, ++ 0x5daec786, ++}; ++ ++static __u32 dh_g[] = { ++ 1, ++ 2, ++}; ++ ++int main(void) ++{ ++ int i; ++ __u32 *k; ++ k = dwc_modpow(NULL, dh_g, dh_a, dh_p); ++ ++ printf("\n\n"); ++ for (i=0; i> 16; ++ printf("%04x %04x ", m, l); ++ if (!((i + 1)%13)) printf("\n"); ++ } ++ printf("\n\n"); ++ ++ if ((k[0] == 0x60) && (k[1] == 0x28e490e5) && (k[0x60] == 0x5a0d3d4e)) { ++ printf("PASS\n\n"); ++ } ++ else { ++ printf("FAIL\n\n"); ++ } ++ ++} ++ ++#endif /* UNITTEST */ ++ ++#endif /* CONFIG_MACH_IPMATE */ ++ ++#endif /*DWC_CRYPTOLIB */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_modpow.h +@@ -0,0 +1,34 @@ ++/* ++ * dwc_modpow.h ++ * See dwc_modpow.c for license and changes ++ */ ++#ifndef _DWC_MODPOW_H ++#define _DWC_MODPOW_H ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "dwc_os.h" ++ ++/** @file ++ * ++ * This file defines the module exponentiation function which is only used ++ * internally by the DWC UWB modules for calculation of PKs during numeric ++ * association. The routine is taken from the PUTTY, an open source terminal ++ * emulator. The PUTTY License is preserved in the dwc_modpow.c file. ++ * ++ */ ++ ++typedef uint32_t BignumInt; ++typedef uint64_t BignumDblInt; ++typedef BignumInt *Bignum; ++ ++/* Compute modular exponentiaion */ ++extern Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _LINUX_BIGNUM_H */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_notifier.c +@@ -0,0 +1,319 @@ ++#ifdef DWC_NOTIFYLIB ++ ++#include "dwc_notifier.h" ++#include "dwc_list.h" ++ ++typedef struct dwc_observer { ++ void *observer; ++ dwc_notifier_callback_t callback; ++ void *data; ++ char *notification; ++ DWC_CIRCLEQ_ENTRY(dwc_observer) list_entry; ++} observer_t; ++ ++DWC_CIRCLEQ_HEAD(observer_queue, dwc_observer); ++ ++typedef struct dwc_notifier { ++ void *mem_ctx; ++ void *object; ++ struct observer_queue observers; ++ DWC_CIRCLEQ_ENTRY(dwc_notifier) list_entry; ++} notifier_t; ++ ++DWC_CIRCLEQ_HEAD(notifier_queue, dwc_notifier); ++ ++typedef struct manager { ++ void *mem_ctx; ++ void *wkq_ctx; ++ dwc_workq_t *wq; ++// dwc_mutex_t *mutex; ++ struct notifier_queue notifiers; ++} manager_t; ++ ++static manager_t *manager = NULL; ++ ++static int create_manager(void *mem_ctx, void *wkq_ctx) ++{ ++ manager = dwc_alloc(mem_ctx, sizeof(manager_t)); ++ if (!manager) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ DWC_CIRCLEQ_INIT(&manager->notifiers); ++ ++ manager->wq = dwc_workq_alloc(wkq_ctx, "DWC Notification WorkQ"); ++ if (!manager->wq) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ return 0; ++} ++ ++static void free_manager(void) ++{ ++ dwc_workq_free(manager->wq); ++ ++ /* All notifiers must have unregistered themselves before this module ++ * can be removed. Hitting this assertion indicates a programmer ++ * error. */ ++ DWC_ASSERT(DWC_CIRCLEQ_EMPTY(&manager->notifiers), ++ "Notification manager being freed before all notifiers have been removed"); ++ dwc_free(manager->mem_ctx, manager); ++} ++ ++#ifdef DEBUG ++static void dump_manager(void) ++{ ++ notifier_t *n; ++ observer_t *o; ++ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ DWC_DEBUG("List of all notifiers and observers:\n"); ++ DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) { ++ DWC_DEBUG("Notifier %p has observers:\n", n->object); ++ DWC_CIRCLEQ_FOREACH(o, &n->observers, list_entry) { ++ DWC_DEBUG(" %p watching %s\n", o->observer, o->notification); ++ } ++ } ++} ++#else ++#define dump_manager(...) ++#endif ++ ++static observer_t *alloc_observer(void *mem_ctx, void *observer, char *notification, ++ dwc_notifier_callback_t callback, void *data) ++{ ++ observer_t *new_observer = dwc_alloc(mem_ctx, sizeof(observer_t)); ++ ++ if (!new_observer) { ++ return NULL; ++ } ++ ++ DWC_CIRCLEQ_INIT_ENTRY(new_observer, list_entry); ++ new_observer->observer = observer; ++ new_observer->notification = notification; ++ new_observer->callback = callback; ++ new_observer->data = data; ++ return new_observer; ++} ++ ++static void free_observer(void *mem_ctx, observer_t *observer) ++{ ++ dwc_free(mem_ctx, observer); ++} ++ ++static notifier_t *alloc_notifier(void *mem_ctx, void *object) ++{ ++ notifier_t *notifier; ++ ++ if (!object) { ++ return NULL; ++ } ++ ++ notifier = dwc_alloc(mem_ctx, sizeof(notifier_t)); ++ if (!notifier) { ++ return NULL; ++ } ++ ++ DWC_CIRCLEQ_INIT(¬ifier->observers); ++ DWC_CIRCLEQ_INIT_ENTRY(notifier, list_entry); ++ ++ notifier->mem_ctx = mem_ctx; ++ notifier->object = object; ++ return notifier; ++} ++ ++static void free_notifier(notifier_t *notifier) ++{ ++ observer_t *observer; ++ ++ DWC_CIRCLEQ_FOREACH(observer, ¬ifier->observers, list_entry) { ++ free_observer(notifier->mem_ctx, observer); ++ } ++ ++ dwc_free(notifier->mem_ctx, notifier); ++} ++ ++static notifier_t *find_notifier(void *object) ++{ ++ notifier_t *notifier; ++ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ if (!object) { ++ return NULL; ++ } ++ ++ DWC_CIRCLEQ_FOREACH(notifier, &manager->notifiers, list_entry) { ++ if (notifier->object == object) { ++ return notifier; ++ } ++ } ++ ++ return NULL; ++} ++ ++int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx) ++{ ++ return create_manager(mem_ctx, wkq_ctx); ++} ++ ++void dwc_free_notification_manager(void) ++{ ++ free_manager(); ++} ++ ++dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object) ++{ ++ notifier_t *notifier; ++ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ notifier = find_notifier(object); ++ if (notifier) { ++ DWC_ERROR("Notifier %p is already registered\n", object); ++ return NULL; ++ } ++ ++ notifier = alloc_notifier(mem_ctx, object); ++ if (!notifier) { ++ return NULL; ++ } ++ ++ DWC_CIRCLEQ_INSERT_TAIL(&manager->notifiers, notifier, list_entry); ++ ++ DWC_INFO("Notifier %p registered", object); ++ dump_manager(); ++ ++ return notifier; ++} ++ ++void dwc_unregister_notifier(dwc_notifier_t *notifier) ++{ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ if (!DWC_CIRCLEQ_EMPTY(¬ifier->observers)) { ++ observer_t *o; ++ ++ DWC_ERROR("Notifier %p has active observers when removing\n", notifier->object); ++ DWC_CIRCLEQ_FOREACH(o, ¬ifier->observers, list_entry) { ++ DWC_DEBUGC(" %p watching %s\n", o->observer, o->notification); ++ } ++ ++ DWC_ASSERT(DWC_CIRCLEQ_EMPTY(¬ifier->observers), ++ "Notifier %p has active observers when removing", notifier); ++ } ++ ++ DWC_CIRCLEQ_REMOVE_INIT(&manager->notifiers, notifier, list_entry); ++ free_notifier(notifier); ++ ++ DWC_INFO("Notifier unregistered"); ++ dump_manager(); ++} ++ ++/* Add an observer to observe the notifier for a particular state, event, or notification. */ ++int dwc_add_observer(void *observer, void *object, char *notification, ++ dwc_notifier_callback_t callback, void *data) ++{ ++ notifier_t *notifier = find_notifier(object); ++ observer_t *new_observer; ++ ++ if (!notifier) { ++ DWC_ERROR("Notifier %p is not found when adding observer\n", object); ++ return -DWC_E_INVALID; ++ } ++ ++ new_observer = alloc_observer(notifier->mem_ctx, observer, notification, callback, data); ++ if (!new_observer) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ DWC_CIRCLEQ_INSERT_TAIL(¬ifier->observers, new_observer, list_entry); ++ ++ DWC_INFO("Added observer %p to notifier %p observing notification %s, callback=%p, data=%p", ++ observer, object, notification, callback, data); ++ ++ dump_manager(); ++ return 0; ++} ++ ++int dwc_remove_observer(void *observer) ++{ ++ notifier_t *n; ++ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) { ++ observer_t *o; ++ observer_t *o2; ++ ++ DWC_CIRCLEQ_FOREACH_SAFE(o, o2, &n->observers, list_entry) { ++ if (o->observer == observer) { ++ DWC_CIRCLEQ_REMOVE_INIT(&n->observers, o, list_entry); ++ DWC_INFO("Removing observer %p from notifier %p watching notification %s:", ++ o->observer, n->object, o->notification); ++ free_observer(n->mem_ctx, o); ++ } ++ } ++ } ++ ++ dump_manager(); ++ return 0; ++} ++ ++typedef struct callback_data { ++ void *mem_ctx; ++ dwc_notifier_callback_t cb; ++ void *observer; ++ void *data; ++ void *object; ++ char *notification; ++ void *notification_data; ++} cb_data_t; ++ ++static void cb_task(void *data) ++{ ++ cb_data_t *cb = (cb_data_t *)data; ++ ++ cb->cb(cb->object, cb->notification, cb->observer, cb->notification_data, cb->data); ++ dwc_free(cb->mem_ctx, cb); ++} ++ ++void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data) ++{ ++ observer_t *o; ++ ++ DWC_ASSERT(manager, "Notification manager not found"); ++ ++ DWC_CIRCLEQ_FOREACH(o, ¬ifier->observers, list_entry) { ++ int len = DWC_STRLEN(notification); ++ ++ if (DWC_STRLEN(o->notification) != len) { ++ continue; ++ } ++ ++ if (DWC_STRNCMP(o->notification, notification, len) == 0) { ++ cb_data_t *cb_data = dwc_alloc(notifier->mem_ctx, sizeof(cb_data_t)); ++ ++ if (!cb_data) { ++ DWC_ERROR("Failed to allocate callback data\n"); ++ return; ++ } ++ ++ cb_data->mem_ctx = notifier->mem_ctx; ++ cb_data->cb = o->callback; ++ cb_data->observer = o->observer; ++ cb_data->data = o->data; ++ cb_data->object = notifier->object; ++ cb_data->notification = notification; ++ cb_data->notification_data = notification_data; ++ DWC_DEBUGC("Observer found %p for notification %s\n", o->observer, notification); ++ DWC_WORKQ_SCHEDULE(manager->wq, cb_task, cb_data, ++ "Notify callback from %p for Notification %s, to observer %p", ++ cb_data->object, notification, cb_data->observer); ++ } ++ } ++} ++ ++#endif /* DWC_NOTIFYLIB */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_notifier.h +@@ -0,0 +1,122 @@ ++ ++#ifndef __DWC_NOTIFIER_H__ ++#define __DWC_NOTIFIER_H__ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++#include "dwc_os.h" ++ ++/** @file ++ * ++ * A simple implementation of the Observer pattern. Any "module" can ++ * register as an observer or notifier. The notion of "module" is abstract and ++ * can mean anything used to identify either an observer or notifier. Usually ++ * it will be a pointer to a data structure which contains some state, ie an ++ * object. ++ * ++ * Before any notifiers can be added, the global notification manager must be ++ * brought up with dwc_alloc_notification_manager(). ++ * dwc_free_notification_manager() will bring it down and free all resources. ++ * These would typically be called upon module load and unload. The ++ * notification manager is a single global instance that handles all registered ++ * observable modules and observers so this should be done only once. ++ * ++ * A module can be observable by using Notifications to publicize some general ++ * information about it's state or operation. It does not care who listens, or ++ * even if anyone listens, or what they do with the information. The observable ++ * modules do not need to know any information about it's observers or their ++ * interface, or their state or data. ++ * ++ * Any module can register to emit Notifications. It should publish a list of ++ * notifications that it can emit and their behavior, such as when they will get ++ * triggered, and what information will be provided to the observer. Then it ++ * should register itself as an observable module. See dwc_register_notifier(). ++ * ++ * Any module can observe any observable, registered module, provided it has a ++ * handle to the other module and knows what notifications to observe. See ++ * dwc_add_observer(). ++ * ++ * A function of type dwc_notifier_callback_t is called whenever a notification ++ * is triggered with one or more observers observing it. This function is ++ * called in it's own process so it may sleep or block if needed. It is ++ * guaranteed to be called sometime after the notification has occurred and will ++ * be called once per each time the notification is triggered. It will NOT be ++ * called in the same process context used to trigger the notification. ++ * ++ * @section Limitiations ++ * ++ * Keep in mind that Notifications that can be triggered in rapid sucession may ++ * schedule too many processes too handle. Be aware of this limitation when ++ * designing to use notifications, and only add notifications for appropriate ++ * observable information. ++ * ++ * Also Notification callbacks are not synchronous. If you need to synchronize ++ * the behavior between module/observer you must use other means. And perhaps ++ * that will mean Notifications are not the proper solution. ++ */ ++ ++struct dwc_notifier; ++typedef struct dwc_notifier dwc_notifier_t; ++ ++/** The callback function must be of this type. ++ * ++ * @param object This is the object that is being observed. ++ * @param notification This is the notification that was triggered. ++ * @param observer This is the observer ++ * @param notification_data This is notification-specific data that the notifier ++ * has included in this notification. The value of this should be published in ++ * the documentation of the observable module with the notifications. ++ * @param user_data This is any custom data that the observer provided when ++ * adding itself as an observer to the notification. */ ++typedef void (*dwc_notifier_callback_t)(void *object, char *notification, void *observer, ++ void *notification_data, void *user_data); ++ ++/** Brings up the notification manager. */ ++extern int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx); ++/** Brings down the notification manager. */ ++extern void dwc_free_notification_manager(void); ++ ++/** This function registers an observable module. A dwc_notifier_t object is ++ * returned to the observable module. This is an opaque object that is used by ++ * the observable module to trigger notifications. This object should only be ++ * accessible to functions that are authorized to trigger notifications for this ++ * module. Observers do not need this object. */ ++extern dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object); ++ ++/** This function unregisters an observable module. All observers have to be ++ * removed prior to unregistration. */ ++extern void dwc_unregister_notifier(dwc_notifier_t *notifier); ++ ++/** Add a module as an observer to the observable module. The observable module ++ * needs to have previously registered with the notification manager. ++ * ++ * @param observer The observer module ++ * @param object The module to observe ++ * @param notification The notification to observe ++ * @param callback The callback function to call ++ * @param user_data Any additional user data to pass into the callback function */ ++extern int dwc_add_observer(void *observer, void *object, char *notification, ++ dwc_notifier_callback_t callback, void *user_data); ++ ++/** Removes the specified observer from all notifications that it is currently ++ * observing. */ ++extern int dwc_remove_observer(void *observer); ++ ++/** This function triggers a Notification. It should be called by the ++ * observable module, or any module or library which the observable module ++ * allows to trigger notification on it's behalf. Such as the dwc_cc_t. ++ * ++ * dwc_notify is a non-blocking function. Callbacks are scheduled called in ++ * their own process context for each trigger. Callbacks can be blocking. ++ * dwc_notify can be called from interrupt context if needed. ++ * ++ */ ++void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data); ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* __DWC_NOTIFIER_H__ */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/dwc_os.h +@@ -0,0 +1,1276 @@ ++/* ========================================================================= ++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_os.h $ ++ * $Revision: #14 $ ++ * $Date: 2010/11/04 $ ++ * $Change: 1621695 $ ++ * ++ * Synopsys Portability Library Software and documentation ++ * (hereinafter, "Software") is an Unsupported proprietary work of ++ * Synopsys, Inc. unless otherwise expressly agreed to in writing ++ * between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product ++ * under any End User Software License Agreement or Agreement for ++ * Licensed Product with Synopsys or any supplement thereto. You are ++ * permitted to use and redistribute this Software in source and binary ++ * forms, with or without modification, provided that redistributions ++ * of source code must retain this notice. You may not view, use, ++ * disclose, copy or distribute this file or any information contained ++ * herein except pursuant to this license grant from Synopsys. If you ++ * do not agree with this notice, including the disclaimer below, then ++ * you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" ++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL ++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY ++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================= */ ++#ifndef _DWC_OS_H_ ++#define _DWC_OS_H_ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++/** @file ++ * ++ * DWC portability library, low level os-wrapper functions ++ * ++ */ ++ ++/* These basic types need to be defined by some OS header file or custom header ++ * file for your specific target architecture. ++ * ++ * uint8_t, int8_t, uint16_t, int16_t, uint32_t, int32_t, uint64_t, int64_t ++ * ++ * Any custom or alternate header file must be added and enabled here. ++ */ ++ ++#ifdef DWC_LINUX ++# include ++# ifdef CONFIG_DEBUG_MUTEXES ++# include ++# endif ++# include ++# include ++# include ++#endif ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++# include ++#endif ++ ++ ++/** @name Primitive Types and Values */ ++ ++/** We define a boolean type for consistency. Can be either YES or NO */ ++typedef uint8_t dwc_bool_t; ++#define YES 1 ++#define NO 0 ++ ++#ifdef DWC_LINUX ++ ++/** @name Error Codes */ ++#define DWC_E_INVALID EINVAL ++#define DWC_E_NO_MEMORY ENOMEM ++#define DWC_E_NO_DEVICE ENODEV ++#define DWC_E_NOT_SUPPORTED EOPNOTSUPP ++#define DWC_E_TIMEOUT ETIMEDOUT ++#define DWC_E_BUSY EBUSY ++#define DWC_E_AGAIN EAGAIN ++#define DWC_E_RESTART ERESTART ++#define DWC_E_ABORT ECONNABORTED ++#define DWC_E_SHUTDOWN ESHUTDOWN ++#define DWC_E_NO_DATA ENODATA ++#define DWC_E_DISCONNECT ECONNRESET ++#define DWC_E_UNKNOWN EINVAL ++#define DWC_E_NO_STREAM_RES ENOSR ++#define DWC_E_COMMUNICATION ECOMM ++#define DWC_E_OVERFLOW EOVERFLOW ++#define DWC_E_PROTOCOL EPROTO ++#define DWC_E_IN_PROGRESS EINPROGRESS ++#define DWC_E_PIPE EPIPE ++#define DWC_E_IO EIO ++#define DWC_E_NO_SPACE ENOSPC ++ ++#else ++ ++/** @name Error Codes */ ++#define DWC_E_INVALID 1001 ++#define DWC_E_NO_MEMORY 1002 ++#define DWC_E_NO_DEVICE 1003 ++#define DWC_E_NOT_SUPPORTED 1004 ++#define DWC_E_TIMEOUT 1005 ++#define DWC_E_BUSY 1006 ++#define DWC_E_AGAIN 1007 ++#define DWC_E_RESTART 1008 ++#define DWC_E_ABORT 1009 ++#define DWC_E_SHUTDOWN 1010 ++#define DWC_E_NO_DATA 1011 ++#define DWC_E_DISCONNECT 2000 ++#define DWC_E_UNKNOWN 3000 ++#define DWC_E_NO_STREAM_RES 4001 ++#define DWC_E_COMMUNICATION 4002 ++#define DWC_E_OVERFLOW 4003 ++#define DWC_E_PROTOCOL 4004 ++#define DWC_E_IN_PROGRESS 4005 ++#define DWC_E_PIPE 4006 ++#define DWC_E_IO 4007 ++#define DWC_E_NO_SPACE 4008 ++ ++#endif ++ ++ ++/** @name Tracing/Logging Functions ++ * ++ * These function provide the capability to add tracing, debugging, and error ++ * messages, as well exceptions as assertions. The WUDEV uses these ++ * extensively. These could be logged to the main console, the serial port, an ++ * internal buffer, etc. These functions could also be no-op if they are too ++ * expensive on your system. By default undefining the DEBUG macro already ++ * no-ops some of these functions. */ ++ ++/** Returns non-zero if in interrupt context. */ ++extern dwc_bool_t DWC_IN_IRQ(void); ++#define dwc_in_irq DWC_IN_IRQ ++ ++/** Returns "IRQ" if DWC_IN_IRQ is true. */ ++static inline char *dwc_irq(void) { ++ return DWC_IN_IRQ() ? "IRQ" : ""; ++} ++ ++/** Returns non-zero if in bottom-half context. */ ++extern dwc_bool_t DWC_IN_BH(void); ++#define dwc_in_bh DWC_IN_BH ++ ++/** Returns "BH" if DWC_IN_BH is true. */ ++static inline char *dwc_bh(void) { ++ return DWC_IN_BH() ? "BH" : ""; ++} ++ ++/** ++ * A vprintf() clone. Just call vprintf if you've got it. ++ */ ++extern void DWC_VPRINTF(char *format, va_list args); ++#define dwc_vprintf DWC_VPRINTF ++ ++/** ++ * A vsnprintf() clone. Just call vprintf if you've got it. ++ */ ++extern int DWC_VSNPRINTF(char *str, int size, char *format, va_list args); ++#define dwc_vsnprintf DWC_VSNPRINTF ++ ++/** ++ * printf() clone. Just call printf if you've go it. ++ */ ++extern void DWC_PRINTF(char *format, ...) ++/* This provides compiler level static checking of the parameters if you're ++ * using GCC. */ ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++#define dwc_printf DWC_PRINTF ++ ++/** ++ * sprintf() clone. Just call sprintf if you've got it. ++ */ ++extern int DWC_SPRINTF(char *string, char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 2, 3))); ++#else ++ ; ++#endif ++#define dwc_sprintf DWC_SPRINTF ++ ++/** ++ * snprintf() clone. Just call snprintf if you've got it. ++ */ ++extern int DWC_SNPRINTF(char *string, int size, char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 3, 4))); ++#else ++ ; ++#endif ++#define dwc_snprintf DWC_SNPRINTF ++ ++/** ++ * Prints a WARNING message. On systems that don't differentiate between ++ * warnings and regular log messages, just print it. Indicates that something ++ * may be wrong with the driver. Works like printf(). ++ * ++ * Use the DWC_WARN macro to call this function. ++ */ ++extern void __DWC_WARN(char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++ ++/** ++ * Prints an error message. On systems that don't differentiate between errors ++ * and regular log messages, just print it. Indicates that something went wrong ++ * with the driver. Works like printf(). ++ * ++ * Use the DWC_ERROR macro to call this function. ++ */ ++extern void __DWC_ERROR(char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++ ++/** ++ * Prints an exception error message and takes some user-defined action such as ++ * print out a backtrace or trigger a breakpoint. Indicates that something went ++ * abnormally wrong with the driver such as programmer error, or other ++ * exceptional condition. It should not be ignored so even on systems without ++ * printing capability, some action should be taken to notify the developer of ++ * it. Works like printf(). ++ */ ++extern void DWC_EXCEPTION(char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++#define dwc_exception DWC_EXCEPTION ++ ++#ifndef DWC_OTG_DEBUG_LEV ++#define DWC_OTG_DEBUG_LEV 0 ++#endif ++ ++#ifdef DEBUG ++/** ++ * Prints out a debug message. Used for logging/trace messages. ++ * ++ * Use the DWC_DEBUG macro to call this function ++ */ ++extern void __DWC_DEBUG(char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 1, 2))); ++#else ++ ; ++#endif ++#else ++#define __DWC_DEBUG printk ++#endif ++ ++/** ++ * Prints out a Debug message. ++ */ ++#define DWC_DEBUG(_format, _args...) __DWC_DEBUG("DEBUG:%s:%s: " _format "\n", \ ++ __func__, dwc_irq(), ## _args) ++#define dwc_debug DWC_DEBUG ++/** ++ * Prints out a Debug message if enabled at compile time. ++ */ ++#if DWC_OTG_DEBUG_LEV > 0 ++#define DWC_DEBUGC(_format, _args...) DWC_DEBUG(_format, ##_args ) ++#else ++#define DWC_DEBUGC(_format, _args...) ++#endif ++#define dwc_debugc DWC_DEBUGC ++/** ++ * Prints out an informative message. ++ */ ++#define DWC_INFO(_format, _args...) DWC_PRINTF("INFO:%s: " _format "\n", \ ++ dwc_irq(), ## _args) ++#define dwc_info DWC_INFO ++/** ++ * Prints out an informative message if enabled at compile time. ++ */ ++#if DWC_OTG_DEBUG_LEV > 1 ++#define DWC_INFOC(_format, _args...) DWC_INFO(_format, ##_args ) ++#else ++#define DWC_INFOC(_format, _args...) ++#endif ++#define dwc_infoc DWC_INFOC ++/** ++ * Prints out a warning message. ++ */ ++#define DWC_WARN(_format, _args...) __DWC_WARN("WARN:%s:%s:%d: " _format "\n", \ ++ dwc_irq(), __func__, __LINE__, ## _args) ++#define dwc_warn DWC_WARN ++/** ++ * Prints out an error message. ++ */ ++#define DWC_ERROR(_format, _args...) __DWC_ERROR("ERROR:%s:%s:%d: " _format "\n", \ ++ dwc_irq(), __func__, __LINE__, ## _args) ++#define dwc_error DWC_ERROR ++ ++#define DWC_PROTO_ERROR(_format, _args...) __DWC_WARN("ERROR:%s:%s:%d: " _format "\n", \ ++ dwc_irq(), __func__, __LINE__, ## _args) ++#define dwc_proto_error DWC_PROTO_ERROR ++ ++#ifdef DEBUG ++/** Prints out a exception error message if the _expr expression fails. Disabled ++ * if DEBUG is not enabled. */ ++#define DWC_ASSERT(_expr, _format, _args...) do { \ ++ if (!(_expr)) { DWC_EXCEPTION("%s:%s:%d: " _format "\n", dwc_irq(), \ ++ __FILE__, __LINE__, ## _args); } \ ++ } while (0) ++#else ++#define DWC_ASSERT(_x...) ++#endif ++#define dwc_assert DWC_ASSERT ++ ++ ++/** @name Byte Ordering ++ * The following functions are for conversions between processor's byte ordering ++ * and specific ordering you want. ++ */ ++ ++/** Converts 32 bit data in CPU byte ordering to little endian. */ ++extern uint32_t DWC_CPU_TO_LE32(uint32_t *p); ++#define dwc_cpu_to_le32 DWC_CPU_TO_LE32 ++ ++/** Converts 32 bit data in CPU byte orderint to big endian. */ ++extern uint32_t DWC_CPU_TO_BE32(uint32_t *p); ++#define dwc_cpu_to_be32 DWC_CPU_TO_BE32 ++ ++/** Converts 32 bit little endian data to CPU byte ordering. */ ++extern uint32_t DWC_LE32_TO_CPU(uint32_t *p); ++#define dwc_le32_to_cpu DWC_LE32_TO_CPU ++ ++/** Converts 32 bit big endian data to CPU byte ordering. */ ++extern uint32_t DWC_BE32_TO_CPU(uint32_t *p); ++#define dwc_be32_to_cpu DWC_BE32_TO_CPU ++ ++/** Converts 16 bit data in CPU byte ordering to little endian. */ ++extern uint16_t DWC_CPU_TO_LE16(uint16_t *p); ++#define dwc_cpu_to_le16 DWC_CPU_TO_LE16 ++ ++/** Converts 16 bit data in CPU byte orderint to big endian. */ ++extern uint16_t DWC_CPU_TO_BE16(uint16_t *p); ++#define dwc_cpu_to_be16 DWC_CPU_TO_BE16 ++ ++/** Converts 16 bit little endian data to CPU byte ordering. */ ++extern uint16_t DWC_LE16_TO_CPU(uint16_t *p); ++#define dwc_le16_to_cpu DWC_LE16_TO_CPU ++ ++/** Converts 16 bit bi endian data to CPU byte ordering. */ ++extern uint16_t DWC_BE16_TO_CPU(uint16_t *p); ++#define dwc_be16_to_cpu DWC_BE16_TO_CPU ++ ++ ++/** @name Register Read/Write ++ * ++ * The following six functions should be implemented to read/write registers of ++ * 32-bit and 64-bit sizes. All modules use this to read/write register values. ++ * The reg value is a pointer to the register calculated from the void *base ++ * variable passed into the driver when it is started. */ ++ ++#ifdef DWC_LINUX ++/* Linux doesn't need any extra parameters for register read/write, so we ++ * just throw away the IO context parameter. ++ */ ++/** Reads the content of a 32-bit register. */ ++extern uint32_t DWC_READ_REG32(uint32_t volatile *reg); ++#define dwc_read_reg32(_ctx_,_reg_) DWC_READ_REG32(_reg_) ++ ++/** Reads the content of a 64-bit register. */ ++extern uint64_t DWC_READ_REG64(uint64_t volatile *reg); ++#define dwc_read_reg64(_ctx_,_reg_) DWC_READ_REG64(_reg_) ++ ++/** Writes to a 32-bit register. */ ++extern void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value); ++#define dwc_write_reg32(_ctx_,_reg_,_val_) DWC_WRITE_REG32(_reg_, _val_) ++ ++/** Writes to a 64-bit register. */ ++extern void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value); ++#define dwc_write_reg64(_ctx_,_reg_,_val_) DWC_WRITE_REG64(_reg_, _val_) ++ ++/** ++ * Modify bit values in a register. Using the ++ * algorithm: (reg_contents & ~clear_mask) | set_mask. ++ */ ++extern void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask); ++#define dwc_modify_reg32(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG32(_reg_,_cmsk_,_smsk_) ++extern void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask); ++#define dwc_modify_reg64(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG64(_reg_,_cmsk_,_smsk_) ++ ++#endif /* DWC_LINUX */ ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++typedef struct dwc_ioctx { ++ struct device *dev; ++ bus_space_tag_t iot; ++ bus_space_handle_t ioh; ++} dwc_ioctx_t; ++ ++/** BSD needs two extra parameters for register read/write, so we pass ++ * them in using the IO context parameter. ++ */ ++/** Reads the content of a 32-bit register. */ ++extern uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg); ++#define dwc_read_reg32 DWC_READ_REG32 ++ ++/** Reads the content of a 64-bit register. */ ++extern uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg); ++#define dwc_read_reg64 DWC_READ_REG64 ++ ++/** Writes to a 32-bit register. */ ++extern void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value); ++#define dwc_write_reg32 DWC_WRITE_REG32 ++ ++/** Writes to a 64-bit register. */ ++extern void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value); ++#define dwc_write_reg64 DWC_WRITE_REG64 ++ ++/** ++ * Modify bit values in a register. Using the ++ * algorithm: (reg_contents & ~clear_mask) | set_mask. ++ */ ++extern void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask); ++#define dwc_modify_reg32 DWC_MODIFY_REG32 ++extern void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask); ++#define dwc_modify_reg64 DWC_MODIFY_REG64 ++ ++#endif /* DWC_FREEBSD || DWC_NETBSD */ ++ ++/** @cond */ ++ ++/** @name Some convenience MACROS used internally. Define DWC_DEBUG_REGS to log the ++ * register writes. */ ++ ++#ifdef DWC_LINUX ++ ++# ifdef DWC_DEBUG_REGS ++ ++#define dwc_define_read_write_reg_n(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \ ++ return DWC_READ_REG32(&container->regs->_reg[num]); \ ++} \ ++static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \ ++ DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \ ++ &(((uint32_t*)container->regs->_reg)[num]), data); \ ++ DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \ ++} ++ ++#define dwc_define_read_write_reg(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg(_container_type *container) { \ ++ return DWC_READ_REG32(&container->regs->_reg); \ ++} \ ++static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \ ++ DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \ ++ DWC_WRITE_REG32(&container->regs->_reg, data); \ ++} ++ ++# else /* DWC_DEBUG_REGS */ ++ ++#define dwc_define_read_write_reg_n(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \ ++ return DWC_READ_REG32(&container->regs->_reg[num]); \ ++} \ ++static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \ ++ DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \ ++} ++ ++#define dwc_define_read_write_reg(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg(_container_type *container) { \ ++ return DWC_READ_REG32(&container->regs->_reg); \ ++} \ ++static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \ ++ DWC_WRITE_REG32(&container->regs->_reg, data); \ ++} ++ ++# endif /* DWC_DEBUG_REGS */ ++ ++#endif /* DWC_LINUX */ ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++ ++# ifdef DWC_DEBUG_REGS ++ ++#define dwc_define_read_write_reg_n(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \ ++ return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \ ++} \ ++static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \ ++ DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \ ++ &(((uint32_t*)container->regs->_reg)[num]), data); \ ++ DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \ ++} ++ ++#define dwc_define_read_write_reg(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \ ++ return DWC_READ_REG32(io_ctx, &container->regs->_reg); \ ++} \ ++static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \ ++ DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \ ++ DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \ ++} ++ ++# else /* DWC_DEBUG_REGS */ ++ ++#define dwc_define_read_write_reg_n(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \ ++ return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \ ++} \ ++static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \ ++ DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \ ++} ++ ++#define dwc_define_read_write_reg(_reg,_container_type) \ ++static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \ ++ return DWC_READ_REG32(io_ctx, &container->regs->_reg); \ ++} \ ++static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \ ++ DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \ ++} ++ ++# endif /* DWC_DEBUG_REGS */ ++ ++#endif /* DWC_FREEBSD || DWC_NETBSD */ ++ ++/** @endcond */ ++ ++ ++#ifdef DWC_CRYPTOLIB ++/** @name Crypto Functions ++ * ++ * These are the low-level cryptographic functions used by the driver. */ ++ ++/** Perform AES CBC */ ++extern int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out); ++#define dwc_aes_cbc DWC_AES_CBC ++ ++/** Fill the provided buffer with random bytes. These should be cryptographic grade random numbers. */ ++extern void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length); ++#define dwc_random_bytes DWC_RANDOM_BYTES ++ ++/** Perform the SHA-256 hash function */ ++extern int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out); ++#define dwc_sha256 DWC_SHA256 ++ ++/** Calculated the HMAC-SHA256 */ ++extern int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t *out); ++#define dwc_hmac_sha256 DWC_HMAC_SHA256 ++ ++#endif /* DWC_CRYPTOLIB */ ++ ++ ++/** @name Memory Allocation ++ * ++ * These function provide access to memory allocation. There are only 2 DMA ++ * functions and 3 Regular memory functions that need to be implemented. None ++ * of the memory debugging routines need to be implemented. The allocation ++ * routines all ZERO the contents of the memory. ++ * ++ * Defining DWC_DEBUG_MEMORY turns on memory debugging and statistic gathering. ++ * This checks for memory leaks, keeping track of alloc/free pairs. It also ++ * keeps track of how much memory the driver is using at any given time. */ ++ ++#define DWC_PAGE_SIZE 4096 ++#define DWC_PAGE_OFFSET(addr) (((uint32_t)addr) & 0xfff) ++#define DWC_PAGE_ALIGNED(addr) ((((uint32_t)addr) & 0xfff) == 0) ++ ++#define DWC_INVALID_DMA_ADDR 0x0 ++ ++#ifdef DWC_LINUX ++/** Type for a DMA address */ ++typedef dma_addr_t dwc_dma_t; ++#endif ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++typedef bus_addr_t dwc_dma_t; ++#endif ++ ++#ifdef DWC_FREEBSD ++typedef struct dwc_dmactx { ++ struct device *dev; ++ bus_dma_tag_t dma_tag; ++ bus_dmamap_t dma_map; ++ bus_addr_t dma_paddr; ++ void *dma_vaddr; ++} dwc_dmactx_t; ++#endif ++ ++#ifdef DWC_NETBSD ++typedef struct dwc_dmactx { ++ struct device *dev; ++ bus_dma_tag_t dma_tag; ++ bus_dmamap_t dma_map; ++ bus_dma_segment_t segs[1]; ++ int nsegs; ++ bus_addr_t dma_paddr; ++ void *dma_vaddr; ++} dwc_dmactx_t; ++#endif ++ ++/* @todo these functions will be added in the future */ ++#if 0 ++/** ++ * Creates a DMA pool from which you can allocate DMA buffers. Buffers ++ * allocated from this pool will be guaranteed to meet the size, alignment, and ++ * boundary requirements specified. ++ * ++ * @param[in] size Specifies the size of the buffers that will be allocated from ++ * this pool. ++ * @param[in] align Specifies the byte alignment requirements of the buffers ++ * allocated from this pool. Must be a power of 2. ++ * @param[in] boundary Specifies the N-byte boundary that buffers allocated from ++ * this pool must not cross. ++ * ++ * @returns A pointer to an internal opaque structure which is not to be ++ * accessed outside of these library functions. Use this handle to specify ++ * which pools to allocate/free DMA buffers from and also to destroy the pool, ++ * when you are done with it. ++ */ ++extern dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, uint32_t align, uint32_t boundary); ++ ++/** ++ * Destroy a DMA pool. All buffers allocated from that pool must be freed first. ++ */ ++extern void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool); ++ ++/** ++ * Allocate a buffer from the specified DMA pool and zeros its contents. ++ */ ++extern void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr); ++ ++/** ++ * Free a previously allocated buffer from the DMA pool. ++ */ ++extern void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr); ++#endif ++ ++/** Allocates a DMA capable buffer and zeroes its contents. */ ++extern void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr); ++ ++/** Allocates a DMA capable buffer and zeroes its contents in atomic contest */ ++extern void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr); ++ ++/** Frees a previously allocated buffer. */ ++extern void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr); ++ ++/** Allocates a block of memory and zeroes its contents. */ ++extern void *__DWC_ALLOC(void *mem_ctx, uint32_t size); ++ ++/** Allocates a block of memory and zeroes its contents, in an atomic manner ++ * which can be used inside interrupt context. The size should be sufficiently ++ * small, a few KB at most, such that failures are not likely to occur. Can just call ++ * __DWC_ALLOC if it is atomic. */ ++extern void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size); ++ ++/** Frees a previously allocated buffer. */ ++extern void __DWC_FREE(void *mem_ctx, void *addr); ++ ++#ifndef DWC_DEBUG_MEMORY ++ ++#define DWC_ALLOC(_size_) __DWC_ALLOC(NULL, _size_) ++#define DWC_ALLOC_ATOMIC(_size_) __DWC_ALLOC_ATOMIC(NULL, _size_) ++#define DWC_FREE(_addr_) __DWC_FREE(NULL, _addr_) ++ ++# ifdef DWC_LINUX ++#define DWC_DMA_ALLOC(_dev, _size_, _dma_) __DWC_DMA_ALLOC(_dev, _size_, _dma_) ++#define DWC_DMA_ALLOC_ATOMIC(_dev, _size_, _dma_) __DWC_DMA_ALLOC_ATOMIC(_dev, _size_, _dma_) ++#define DWC_DMA_FREE(_dev, _size_,_virt_, _dma_) __DWC_DMA_FREE(_dev, _size_, _virt_, _dma_) ++# endif ++ ++# if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++#define DWC_DMA_ALLOC __DWC_DMA_ALLOC ++#define DWC_DMA_FREE __DWC_DMA_FREE ++# endif ++extern void *dwc_dma_alloc_atomic_debug(uint32_t size, dwc_dma_t *dma_addr, char const *func, int line); ++ ++#else /* DWC_DEBUG_MEMORY */ ++ ++extern void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line); ++extern void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func, int line); ++extern void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line); ++extern void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr, ++ char const *func, int line); ++extern void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr, ++ char const *func, int line); ++extern void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr, ++ dwc_dma_t dma_addr, char const *func, int line); ++ ++extern int dwc_memory_debug_start(void *mem_ctx); ++extern void dwc_memory_debug_stop(void); ++extern void dwc_memory_debug_report(void); ++ ++#define DWC_ALLOC(_size_) dwc_alloc_debug(NULL, _size_, __func__, __LINE__) ++#define DWC_ALLOC_ATOMIC(_size_) dwc_alloc_atomic_debug(NULL, _size_, \ ++ __func__, __LINE__) ++#define DWC_FREE(_addr_) dwc_free_debug(NULL, _addr_, __func__, __LINE__) ++ ++# ifdef DWC_LINUX ++#define DWC_DMA_ALLOC(_dev, _size_, _dma_) \ ++ dwc_dma_alloc_debug(_dev, _size_, _dma_, __func__, __LINE__) ++#define DWC_DMA_ALLOC_ATOMIC(_dev, _size_, _dma_) \ ++ dwc_dma_alloc_atomic_debug(_dev, _size_, _dma_, __func__, __LINE__) ++#define DWC_DMA_FREE(_dev, _size_, _virt_, _dma_) \ ++ dwc_dma_free_debug(_dev, _size_, _virt_, _dma_, __func__, __LINE__) ++# endif ++ ++# if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++#define DWC_DMA_ALLOC(_ctx_,_size_,_dma_) dwc_dma_alloc_debug(_ctx_, _size_, \ ++ _dma_, __func__, __LINE__) ++#define DWC_DMA_FREE(_ctx_,_size_,_virt_,_dma_) dwc_dma_free_debug(_ctx_, _size_, \ ++ _virt_, _dma_, __func__, __LINE__) ++# endif ++ ++#endif /* DWC_DEBUG_MEMORY */ ++ ++#define dwc_alloc(_ctx_,_size_) DWC_ALLOC(_size_) ++#define dwc_alloc_atomic(_ctx_,_size_) DWC_ALLOC_ATOMIC(_size_) ++#define dwc_free(_ctx_,_addr_) DWC_FREE(_addr_) ++ ++#ifdef DWC_LINUX ++/* Linux doesn't need any extra parameters for DMA buffer allocation, so we ++ * just throw away the DMA context parameter. ++ */ ++#define dwc_dma_alloc(_ctx_,_size_,_dma_) DWC_DMA_ALLOC(_size_, _dma_) ++#define dwc_dma_alloc_atomic(_ctx_,_size_,_dma_) DWC_DMA_ALLOC_ATOMIC(_size_, _dma_) ++#define dwc_dma_free(_ctx_,_size_,_virt_,_dma_) DWC_DMA_FREE(_size_, _virt_, _dma_) ++#endif ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++/** BSD needs several extra parameters for DMA buffer allocation, so we pass ++ * them in using the DMA context parameter. ++ */ ++#define dwc_dma_alloc DWC_DMA_ALLOC ++#define dwc_dma_free DWC_DMA_FREE ++#endif ++ ++ ++/** @name Memory and String Processing */ ++ ++/** memset() clone */ ++extern void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size); ++#define dwc_memset DWC_MEMSET ++ ++/** memcpy() clone */ ++extern void *DWC_MEMCPY(void *dest, void const *src, uint32_t size); ++#define dwc_memcpy DWC_MEMCPY ++ ++/** memmove() clone */ ++extern void *DWC_MEMMOVE(void *dest, void *src, uint32_t size); ++#define dwc_memmove DWC_MEMMOVE ++ ++/** memcmp() clone */ ++extern int DWC_MEMCMP(void *m1, void *m2, uint32_t size); ++#define dwc_memcmp DWC_MEMCMP ++ ++/** strcmp() clone */ ++extern int DWC_STRCMP(void *s1, void *s2); ++#define dwc_strcmp DWC_STRCMP ++ ++/** strncmp() clone */ ++extern int DWC_STRNCMP(void *s1, void *s2, uint32_t size); ++#define dwc_strncmp DWC_STRNCMP ++ ++/** strlen() clone, for NULL terminated ASCII strings */ ++extern int DWC_STRLEN(char const *str); ++#define dwc_strlen DWC_STRLEN ++ ++/** strcpy() clone, for NULL terminated ASCII strings */ ++extern char *DWC_STRCPY(char *to, const char *from); ++#define dwc_strcpy DWC_STRCPY ++ ++/** strdup() clone. If you wish to use memory allocation debugging, this ++ * implementation of strdup should use the DWC_* memory routines instead of ++ * calling a predefined strdup. Otherwise the memory allocated by this routine ++ * will not be seen by the debugging routines. */ ++extern char *DWC_STRDUP(char const *str); ++#define dwc_strdup(_ctx_,_str_) DWC_STRDUP(_str_) ++ ++/** NOT an atoi() clone. Read the description carefully. Returns an integer ++ * converted from the string str in base 10 unless the string begins with a "0x" ++ * in which case it is base 16. String must be a NULL terminated sequence of ++ * ASCII characters and may optionally begin with whitespace, a + or -, and a ++ * "0x" prefix if base 16. The remaining characters must be valid digits for ++ * the number and end with a NULL character. If any invalid characters are ++ * encountered or it returns with a negative error code and the results of the ++ * conversion are undefined. On sucess it returns 0. Overflow conditions are ++ * undefined. An example implementation using atoi() can be referenced from the ++ * Linux implementation. */ ++extern int DWC_ATOI(const char *str, int32_t *value); ++#define dwc_atoi DWC_ATOI ++ ++/** Same as above but for unsigned. */ ++extern int DWC_ATOUI(const char *str, uint32_t *value); ++#define dwc_atoui DWC_ATOUI ++ ++#ifdef DWC_UTFLIB ++/** This routine returns a UTF16LE unicode encoded string from a UTF8 string. */ ++extern int DWC_UTF8_TO_UTF16LE(uint8_t const *utf8string, uint16_t *utf16string, unsigned len); ++#define dwc_utf8_to_utf16le DWC_UTF8_TO_UTF16LE ++#endif ++ ++ ++/** @name Wait queues ++ * ++ * Wait queues provide a means of synchronizing between threads or processes. A ++ * process can block on a waitq if some condition is not true, waiting for it to ++ * become true. When the waitq is triggered all waiting process will get ++ * unblocked and the condition will be check again. Waitqs should be triggered ++ * every time a condition can potentially change.*/ ++struct dwc_waitq; ++ ++/** Type for a waitq */ ++typedef struct dwc_waitq dwc_waitq_t; ++ ++/** The type of waitq condition callback function. This is called every time ++ * condition is evaluated. */ ++typedef int (*dwc_waitq_condition_t)(void *data); ++ ++/** Allocate a waitq */ ++extern dwc_waitq_t *DWC_WAITQ_ALLOC(void); ++#define dwc_waitq_alloc(_ctx_) DWC_WAITQ_ALLOC() ++ ++/** Free a waitq */ ++extern void DWC_WAITQ_FREE(dwc_waitq_t *wq); ++#define dwc_waitq_free DWC_WAITQ_FREE ++ ++/** Check the condition and if it is false, block on the waitq. When unblocked, check the ++ * condition again. The function returns when the condition becomes true. The return value ++ * is 0 on condition true, DWC_WAITQ_ABORTED on abort or killed, or DWC_WAITQ_UNKNOWN on error. */ ++extern int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data); ++#define dwc_waitq_wait DWC_WAITQ_WAIT ++ ++/** Check the condition and if it is false, block on the waitq. When unblocked, ++ * check the condition again. The function returns when the condition become ++ * true or the timeout has passed. The return value is 0 on condition true or ++ * DWC_TIMED_OUT on timeout, or DWC_WAITQ_ABORTED, or DWC_WAITQ_UNKNOWN on ++ * error. */ ++extern int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, ++ void *data, int32_t msecs); ++#define dwc_waitq_wait_timeout DWC_WAITQ_WAIT_TIMEOUT ++ ++/** Trigger a waitq, unblocking all processes. This should be called whenever a condition ++ * has potentially changed. */ ++extern void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq); ++#define dwc_waitq_trigger DWC_WAITQ_TRIGGER ++ ++/** Unblock all processes waiting on the waitq with an ABORTED result. */ ++extern void DWC_WAITQ_ABORT(dwc_waitq_t *wq); ++#define dwc_waitq_abort DWC_WAITQ_ABORT ++ ++ ++/** @name Threads ++ * ++ * A thread must be explicitly stopped. It must check DWC_THREAD_SHOULD_STOP ++ * whenever it is woken up, and then return. The DWC_THREAD_STOP function ++ * returns the value from the thread. ++ */ ++ ++struct dwc_thread; ++ ++/** Type for a thread */ ++typedef struct dwc_thread dwc_thread_t; ++ ++/** The thread function */ ++typedef int (*dwc_thread_function_t)(void *data); ++ ++/** Create a thread and start it running the thread_function. Returns a handle ++ * to the thread */ ++extern dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data); ++#define dwc_thread_run(_ctx_,_func_,_name_,_data_) DWC_THREAD_RUN(_func_, _name_, _data_) ++ ++/** Stops a thread. Return the value returned by the thread. Or will return ++ * DWC_ABORT if the thread never started. */ ++extern int DWC_THREAD_STOP(dwc_thread_t *thread); ++#define dwc_thread_stop DWC_THREAD_STOP ++ ++/** Signifies to the thread that it must stop. */ ++#ifdef DWC_LINUX ++/* Linux doesn't need any parameters for kthread_should_stop() */ ++extern dwc_bool_t DWC_THREAD_SHOULD_STOP(void); ++#define dwc_thread_should_stop(_thrd_) DWC_THREAD_SHOULD_STOP() ++ ++/* No thread_exit function in Linux */ ++#define dwc_thread_exit(_thrd_) ++#endif ++ ++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) ++/** BSD needs the thread pointer for kthread_suspend_check() */ ++extern dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread); ++#define dwc_thread_should_stop DWC_THREAD_SHOULD_STOP ++ ++/** The thread must call this to exit. */ ++extern void DWC_THREAD_EXIT(dwc_thread_t *thread); ++#define dwc_thread_exit DWC_THREAD_EXIT ++#endif ++ ++ ++/** @name Work queues ++ * ++ * Workqs are used to queue a callback function to be called at some later time, ++ * in another thread. */ ++struct dwc_workq; ++ ++/** Type for a workq */ ++typedef struct dwc_workq dwc_workq_t; ++ ++/** The type of the callback function to be called. */ ++typedef void (*dwc_work_callback_t)(void *data); ++ ++/** Allocate a workq */ ++extern dwc_workq_t *DWC_WORKQ_ALLOC(char *name); ++#define dwc_workq_alloc(_ctx_,_name_) DWC_WORKQ_ALLOC(_name_) ++ ++/** Free a workq. All work must be completed before being freed. */ ++extern void DWC_WORKQ_FREE(dwc_workq_t *workq); ++#define dwc_workq_free DWC_WORKQ_FREE ++ ++/** Schedule a callback on the workq, passing in data. The function will be ++ * scheduled at some later time. */ ++extern void DWC_WORKQ_SCHEDULE(dwc_workq_t *workq, dwc_work_callback_t cb, ++ void *data, char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 4, 5))); ++#else ++ ; ++#endif ++#define dwc_workq_schedule DWC_WORKQ_SCHEDULE ++ ++/** Schedule a callback on the workq, that will be called until at least ++ * given number miliseconds have passed. */ ++extern void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *workq, dwc_work_callback_t cb, ++ void *data, uint32_t time, char *format, ...) ++#ifdef __GNUC__ ++ __attribute__ ((format(printf, 5, 6))); ++#else ++ ; ++#endif ++#define dwc_workq_schedule_delayed DWC_WORKQ_SCHEDULE_DELAYED ++ ++/** The number of processes in the workq */ ++extern int DWC_WORKQ_PENDING(dwc_workq_t *workq); ++#define dwc_workq_pending DWC_WORKQ_PENDING ++ ++/** Blocks until all the work in the workq is complete or timed out. Returns < ++ * 0 on timeout. */ ++extern int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout); ++#define dwc_workq_wait_work_done DWC_WORKQ_WAIT_WORK_DONE ++ ++ ++/** @name Tasklets ++ * ++ */ ++struct dwc_tasklet; ++ ++/** Type for a tasklet */ ++typedef struct dwc_tasklet dwc_tasklet_t; ++ ++/** The type of the callback function to be called */ ++typedef void (*dwc_tasklet_callback_t)(void *data); ++ ++/** Allocates a tasklet */ ++extern dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data); ++#define dwc_task_alloc(_ctx_,_name_,_cb_,_data_) DWC_TASK_ALLOC(_name_, _cb_, _data_) ++ ++/** Frees a tasklet */ ++extern void DWC_TASK_FREE(dwc_tasklet_t *task); ++#define dwc_task_free DWC_TASK_FREE ++ ++/** Schedules a tasklet to run */ ++extern void DWC_TASK_SCHEDULE(dwc_tasklet_t *task); ++#define dwc_task_schedule DWC_TASK_SCHEDULE ++ ++extern void DWC_TASK_HI_SCHEDULE(dwc_tasklet_t *task); ++#define dwc_task_hi_schedule DWC_TASK_HI_SCHEDULE ++ ++/** @name Timer ++ * ++ * Callbacks must be small and atomic. ++ */ ++struct dwc_timer; ++ ++/** Type for a timer */ ++typedef struct dwc_timer dwc_timer_t; ++ ++/** The type of the callback function to be called */ ++typedef void (*dwc_timer_callback_t)(void *data); ++ ++/** Allocates a timer */ ++extern dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data); ++#define dwc_timer_alloc(_ctx_,_name_,_cb_,_data_) DWC_TIMER_ALLOC(_name_,_cb_,_data_) ++ ++/** Frees a timer */ ++extern void DWC_TIMER_FREE(dwc_timer_t *timer); ++#define dwc_timer_free DWC_TIMER_FREE ++ ++/** Schedules the timer to run at time ms from now. And will repeat at every ++ * repeat_interval msec therafter ++ * ++ * Modifies a timer that is still awaiting execution to a new expiration time. ++ * The mod_time is added to the old time. */ ++extern void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time); ++#define dwc_timer_schedule DWC_TIMER_SCHEDULE ++ ++/** Disables the timer from execution. */ ++extern void DWC_TIMER_CANCEL(dwc_timer_t *timer); ++#define dwc_timer_cancel DWC_TIMER_CANCEL ++ ++ ++/** @name Spinlocks ++ * ++ * These locks are used when the work between the lock/unlock is atomic and ++ * short. Interrupts are also disabled during the lock/unlock and thus they are ++ * suitable to lock between interrupt/non-interrupt context. They also lock ++ * between processes if you have multiple CPUs or Preemption. If you don't have ++ * multiple CPUS or Preemption, then the you can simply implement the ++ * DWC_SPINLOCK and DWC_SPINUNLOCK to disable and enable interrupts. Because ++ * the work between the lock/unlock is atomic, the process context will never ++ * change, and so you never have to lock between processes. */ ++ ++struct dwc_spinlock; ++ ++/** Type for a spinlock */ ++typedef struct dwc_spinlock dwc_spinlock_t; ++ ++/** Type for the 'flags' argument to spinlock funtions */ ++typedef unsigned long dwc_irqflags_t; ++ ++/** Returns an initialized lock variable. This function should allocate and ++ * initialize the OS-specific data structure used for locking. This data ++ * structure is to be used for the DWC_LOCK and DWC_UNLOCK functions and should ++ * be freed by the DWC_FREE_LOCK when it is no longer used. ++ * ++ * For Linux Spinlock Debugging make it macro because the debugging routines use ++ * the symbol name to determine recursive locking. Using a wrapper function ++ * makes it falsely think recursive locking occurs. */ ++#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK) ++#define DWC_SPINLOCK_ALLOC_LINUX_DEBUG(lock) ({ \ ++ lock = DWC_ALLOC(sizeof(spinlock_t)); \ ++ if (lock) { \ ++ spin_lock_init((spinlock_t *)lock); \ ++ } \ ++}) ++#else ++extern dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void); ++#define dwc_spinlock_alloc(_ctx_) DWC_SPINLOCK_ALLOC() ++#endif ++ ++/** Frees an initialized lock variable. */ ++extern void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock); ++#define dwc_spinlock_free(_ctx_,_lock_) DWC_SPINLOCK_FREE(_lock_) ++ ++/** Disables interrupts and blocks until it acquires the lock. ++ * ++ * @param lock Pointer to the spinlock. ++ * @param flags Unsigned long for irq flags storage. ++ */ ++extern void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags); ++#define dwc_spinlock_irqsave DWC_SPINLOCK_IRQSAVE ++ ++/** Re-enables the interrupt and releases the lock. ++ * ++ * @param lock Pointer to the spinlock. ++ * @param flags Unsigned long for irq flags storage. Must be the same as was ++ * passed into DWC_LOCK. ++ */ ++extern void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags); ++#define dwc_spinunlock_irqrestore DWC_SPINUNLOCK_IRQRESTORE ++ ++/** Blocks until it acquires the lock. ++ * ++ * @param lock Pointer to the spinlock. ++ */ ++extern void DWC_SPINLOCK(dwc_spinlock_t *lock); ++#define dwc_spinlock DWC_SPINLOCK ++ ++/** Releases the lock. ++ * ++ * @param lock Pointer to the spinlock. ++ */ ++extern void DWC_SPINUNLOCK(dwc_spinlock_t *lock); ++#define dwc_spinunlock DWC_SPINUNLOCK ++ ++ ++/** @name Mutexes ++ * ++ * Unlike spinlocks Mutexes lock only between processes and the work between the ++ * lock/unlock CAN block, therefore it CANNOT be called from interrupt context. ++ */ ++ ++struct dwc_mutex; ++ ++/** Type for a mutex */ ++typedef struct dwc_mutex dwc_mutex_t; ++ ++/* For Linux Mutex Debugging make it inline because the debugging routines use ++ * the symbol to determine recursive locking. This makes it falsely think ++ * recursive locking occurs. */ ++#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES) ++#define DWC_MUTEX_ALLOC_LINUX_DEBUG(__mutexp) ({ \ ++ __mutexp = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex)); \ ++ mutex_init((struct mutex *)__mutexp); \ ++}) ++#endif ++ ++/** Allocate a mutex */ ++extern dwc_mutex_t *DWC_MUTEX_ALLOC(void); ++#define dwc_mutex_alloc(_ctx_) DWC_MUTEX_ALLOC() ++ ++/* For memory leak debugging when using Linux Mutex Debugging */ ++#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES) ++#define DWC_MUTEX_FREE(__mutexp) do { \ ++ mutex_destroy((struct mutex *)__mutexp); \ ++ DWC_FREE(__mutexp); \ ++} while(0) ++#else ++/** Free a mutex */ ++extern void DWC_MUTEX_FREE(dwc_mutex_t *mutex); ++#define dwc_mutex_free(_ctx_,_mutex_) DWC_MUTEX_FREE(_mutex_) ++#endif ++ ++/** Lock a mutex */ ++extern void DWC_MUTEX_LOCK(dwc_mutex_t *mutex); ++#define dwc_mutex_lock DWC_MUTEX_LOCK ++ ++/** Non-blocking lock returns 1 on successful lock. */ ++extern int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex); ++#define dwc_mutex_trylock DWC_MUTEX_TRYLOCK ++ ++/** Unlock a mutex */ ++extern void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex); ++#define dwc_mutex_unlock DWC_MUTEX_UNLOCK ++ ++ ++/** @name Time */ ++ ++/** Microsecond delay. ++ * ++ * @param usecs Microseconds to delay. ++ */ ++extern void DWC_UDELAY(uint32_t usecs); ++#define dwc_udelay DWC_UDELAY ++ ++/** Millisecond delay. ++ * ++ * @param msecs Milliseconds to delay. ++ */ ++extern void DWC_MDELAY(uint32_t msecs); ++#define dwc_mdelay DWC_MDELAY ++ ++/** Non-busy waiting. ++ * Sleeps for specified number of milliseconds. ++ * ++ * @param msecs Milliseconds to sleep. ++ */ ++extern void DWC_MSLEEP(uint32_t msecs); ++#define dwc_msleep DWC_MSLEEP ++ ++/** ++ * Returns number of milliseconds since boot. ++ */ ++extern uint32_t DWC_TIME(void); ++#define dwc_time DWC_TIME ++ ++ ++ ++ ++/* @mainpage DWC Portability and Common Library ++ * ++ * This is the documentation for the DWC Portability and Common Library. ++ * ++ * @section intro Introduction ++ * ++ * The DWC Portability library consists of wrapper calls and data structures to ++ * all low-level functions which are typically provided by the OS. The WUDEV ++ * driver uses only these functions. In order to port the WUDEV driver, only ++ * the functions in this library need to be re-implemented, with the same ++ * behavior as documented here. ++ * ++ * The Common library consists of higher level functions, which rely only on ++ * calling the functions from the DWC Portability library. These common ++ * routines are shared across modules. Some of the common libraries need to be ++ * used directly by the driver programmer when porting WUDEV. Such as the ++ * parameter and notification libraries. ++ * ++ * @section low Portability Library OS Wrapper Functions ++ * ++ * Any function starting with DWC and in all CAPS is a low-level OS-wrapper that ++ * needs to be implemented when porting, for example DWC_MUTEX_ALLOC(). All of ++ * these functions are included in the dwc_os.h file. ++ * ++ * There are many functions here covering a wide array of OS services. Please ++ * see dwc_os.h for details, and implementation notes for each function. ++ * ++ * @section common Common Library Functions ++ * ++ * Any function starting with dwc and in all lowercase is a common library ++ * routine. These functions have a portable implementation and do not need to ++ * be reimplemented when porting. The common routines can be used by any ++ * driver, and some must be used by the end user to control the drivers. For ++ * example, you must use the Parameter common library in order to set the ++ * parameters in the WUDEV module. ++ * ++ * The common libraries consist of the following: ++ * ++ * - Connection Contexts - Used internally and can be used by end-user. See dwc_cc.h ++ * - Parameters - Used internally and can be used by end-user. See dwc_params.h ++ * - Notifications - Used internally and can be used by end-user. See dwc_notifier.h ++ * - Lists - Used internally and can be used by end-user. See dwc_list.h ++ * - Memory Debugging - Used internally and can be used by end-user. See dwc_os.h ++ * - Modpow - Used internally only. See dwc_modpow.h ++ * - DH - Used internally only. See dwc_dh.h ++ * - Crypto - Used internally only. See dwc_crypto.h ++ * ++ * ++ * @section prereq Prerequistes For dwc_os.h ++ * @subsection types Data Types ++ * ++ * The dwc_os.h file assumes that several low-level data types are pre defined for the ++ * compilation environment. These data types are: ++ * ++ * - uint8_t - unsigned 8-bit data type ++ * - int8_t - signed 8-bit data type ++ * - uint16_t - unsigned 16-bit data type ++ * - int16_t - signed 16-bit data type ++ * - uint32_t - unsigned 32-bit data type ++ * - int32_t - signed 32-bit data type ++ * - uint64_t - unsigned 64-bit data type ++ * - int64_t - signed 64-bit data type ++ * ++ * Ensure that these are defined before using dwc_os.h. The easiest way to do ++ * that is to modify the top of the file to include the appropriate header. ++ * This is already done for the Linux environment. If the DWC_LINUX macro is ++ * defined, the correct header will be added. A standard header is ++ * also used for environments where standard C headers are available. ++ * ++ * @subsection stdarg Variable Arguments ++ * ++ * Variable arguments are provided by a standard C header . it is ++ * available in Both the Linux and ANSI C enviornment. An equivalent must be ++ * provided in your enviornment in order to use dwc_os.h with the debug and ++ * tracing message functionality. ++ * ++ * @subsection thread Threading ++ * ++ * WUDEV Core must be run on an operating system that provides for multiple ++ * threads/processes. Threading can be implemented in many ways, even in ++ * embedded systems without an operating system. At the bare minimum, the ++ * system should be able to start any number of processes at any time to handle ++ * special work. It need not be a pre-emptive system. Process context can ++ * change upon a call to a blocking function. The hardware interrupt context ++ * that calls the module's ISR() function must be differentiable from process ++ * context, even if your processes are impemented via a hardware interrupt. ++ * Further locking mechanism between process must exist (or be implemented), and ++ * process context must have a way to disable interrupts for a period of time to ++ * lock them out. If all of this exists, the functions in dwc_os.h related to ++ * threading should be able to be implemented with the defined behavior. ++ * ++ */ ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _DWC_OS_H_ */ +--- /dev/null ++++ b/drivers/usb/host/dwc_common_port/usb.h +@@ -0,0 +1,946 @@ ++/* ++ * Copyright (c) 1998 The NetBSD Foundation, Inc. ++ * All rights reserved. ++ * ++ * This code is derived from software contributed to The NetBSD Foundation ++ * by Lennart Augustsson (lennart@augustsson.net) at ++ * Carlstedt Research & Technology. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. All advertising materials mentioning features or use of this software ++ * must display the following acknowledgement: ++ * This product includes software developed by the NetBSD ++ * Foundation, Inc. and its contributors. ++ * 4. Neither the name of The NetBSD Foundation nor the names of its ++ * contributors may be used to endorse or promote products derived ++ * from this software without specific prior written permission. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS ++ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED ++ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS ++ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++/* Modified by Synopsys, Inc, 12/12/2007 */ ++ ++ ++#ifndef _USB_H_ ++#define _USB_H_ ++ ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++/* ++ * The USB records contain some unaligned little-endian word ++ * components. The U[SG]ETW macros take care of both the alignment ++ * and endian problem and should always be used to access non-byte ++ * values. ++ */ ++typedef u_int8_t uByte; ++typedef u_int8_t uWord[2]; ++typedef u_int8_t uDWord[4]; ++ ++#define USETW2(w,h,l) ((w)[0] = (u_int8_t)(l), (w)[1] = (u_int8_t)(h)) ++#define UCONSTW(x) { (x) & 0xff, ((x) >> 8) & 0xff } ++#define UCONSTDW(x) { (x) & 0xff, ((x) >> 8) & 0xff, \ ++ ((x) >> 16) & 0xff, ((x) >> 24) & 0xff } ++ ++#if 1 ++#define UGETW(w) ((w)[0] | ((w)[1] << 8)) ++#define USETW(w,v) ((w)[0] = (u_int8_t)(v), (w)[1] = (u_int8_t)((v) >> 8)) ++#define UGETDW(w) ((w)[0] | ((w)[1] << 8) | ((w)[2] << 16) | ((w)[3] << 24)) ++#define USETDW(w,v) ((w)[0] = (u_int8_t)(v), \ ++ (w)[1] = (u_int8_t)((v) >> 8), \ ++ (w)[2] = (u_int8_t)((v) >> 16), \ ++ (w)[3] = (u_int8_t)((v) >> 24)) ++#else ++/* ++ * On little-endian machines that can handle unanliged accesses ++ * (e.g. i386) these macros can be replaced by the following. ++ */ ++#define UGETW(w) (*(u_int16_t *)(w)) ++#define USETW(w,v) (*(u_int16_t *)(w) = (v)) ++#define UGETDW(w) (*(u_int32_t *)(w)) ++#define USETDW(w,v) (*(u_int32_t *)(w) = (v)) ++#endif ++ ++/* ++ * Macros for accessing UAS IU fields, which are big-endian ++ */ ++#define IUSETW2(w,h,l) ((w)[0] = (u_int8_t)(h), (w)[1] = (u_int8_t)(l)) ++#define IUCONSTW(x) { ((x) >> 8) & 0xff, (x) & 0xff } ++#define IUCONSTDW(x) { ((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \ ++ ((x) >> 8) & 0xff, (x) & 0xff } ++#define IUGETW(w) (((w)[0] << 8) | (w)[1]) ++#define IUSETW(w,v) ((w)[0] = (u_int8_t)((v) >> 8), (w)[1] = (u_int8_t)(v)) ++#define IUGETDW(w) (((w)[0] << 24) | ((w)[1] << 16) | ((w)[2] << 8) | (w)[3]) ++#define IUSETDW(w,v) ((w)[0] = (u_int8_t)((v) >> 24), \ ++ (w)[1] = (u_int8_t)((v) >> 16), \ ++ (w)[2] = (u_int8_t)((v) >> 8), \ ++ (w)[3] = (u_int8_t)(v)) ++ ++#define UPACKED __attribute__((__packed__)) ++ ++typedef struct { ++ uByte bmRequestType; ++ uByte bRequest; ++ uWord wValue; ++ uWord wIndex; ++ uWord wLength; ++} UPACKED usb_device_request_t; ++ ++#define UT_GET_DIR(a) ((a) & 0x80) ++#define UT_WRITE 0x00 ++#define UT_READ 0x80 ++ ++#define UT_GET_TYPE(a) ((a) & 0x60) ++#define UT_STANDARD 0x00 ++#define UT_CLASS 0x20 ++#define UT_VENDOR 0x40 ++ ++#define UT_GET_RECIPIENT(a) ((a) & 0x1f) ++#define UT_DEVICE 0x00 ++#define UT_INTERFACE 0x01 ++#define UT_ENDPOINT 0x02 ++#define UT_OTHER 0x03 ++ ++#define UT_READ_DEVICE (UT_READ | UT_STANDARD | UT_DEVICE) ++#define UT_READ_INTERFACE (UT_READ | UT_STANDARD | UT_INTERFACE) ++#define UT_READ_ENDPOINT (UT_READ | UT_STANDARD | UT_ENDPOINT) ++#define UT_WRITE_DEVICE (UT_WRITE | UT_STANDARD | UT_DEVICE) ++#define UT_WRITE_INTERFACE (UT_WRITE | UT_STANDARD | UT_INTERFACE) ++#define UT_WRITE_ENDPOINT (UT_WRITE | UT_STANDARD | UT_ENDPOINT) ++#define UT_READ_CLASS_DEVICE (UT_READ | UT_CLASS | UT_DEVICE) ++#define UT_READ_CLASS_INTERFACE (UT_READ | UT_CLASS | UT_INTERFACE) ++#define UT_READ_CLASS_OTHER (UT_READ | UT_CLASS | UT_OTHER) ++#define UT_READ_CLASS_ENDPOINT (UT_READ | UT_CLASS | UT_ENDPOINT) ++#define UT_WRITE_CLASS_DEVICE (UT_WRITE | UT_CLASS | UT_DEVICE) ++#define UT_WRITE_CLASS_INTERFACE (UT_WRITE | UT_CLASS | UT_INTERFACE) ++#define UT_WRITE_CLASS_OTHER (UT_WRITE | UT_CLASS | UT_OTHER) ++#define UT_WRITE_CLASS_ENDPOINT (UT_WRITE | UT_CLASS | UT_ENDPOINT) ++#define UT_READ_VENDOR_DEVICE (UT_READ | UT_VENDOR | UT_DEVICE) ++#define UT_READ_VENDOR_INTERFACE (UT_READ | UT_VENDOR | UT_INTERFACE) ++#define UT_READ_VENDOR_OTHER (UT_READ | UT_VENDOR | UT_OTHER) ++#define UT_READ_VENDOR_ENDPOINT (UT_READ | UT_VENDOR | UT_ENDPOINT) ++#define UT_WRITE_VENDOR_DEVICE (UT_WRITE | UT_VENDOR | UT_DEVICE) ++#define UT_WRITE_VENDOR_INTERFACE (UT_WRITE | UT_VENDOR | UT_INTERFACE) ++#define UT_WRITE_VENDOR_OTHER (UT_WRITE | UT_VENDOR | UT_OTHER) ++#define UT_WRITE_VENDOR_ENDPOINT (UT_WRITE | UT_VENDOR | UT_ENDPOINT) ++ ++/* Requests */ ++#define UR_GET_STATUS 0x00 ++#define USTAT_STANDARD_STATUS 0x00 ++#define WUSTAT_WUSB_FEATURE 0x01 ++#define WUSTAT_CHANNEL_INFO 0x02 ++#define WUSTAT_RECEIVED_DATA 0x03 ++#define WUSTAT_MAS_AVAILABILITY 0x04 ++#define WUSTAT_CURRENT_TRANSMIT_POWER 0x05 ++#define UR_CLEAR_FEATURE 0x01 ++#define UR_SET_FEATURE 0x03 ++#define UR_SET_AND_TEST_FEATURE 0x0c ++#define UR_SET_ADDRESS 0x05 ++#define UR_GET_DESCRIPTOR 0x06 ++#define UDESC_DEVICE 0x01 ++#define UDESC_CONFIG 0x02 ++#define UDESC_STRING 0x03 ++#define UDESC_INTERFACE 0x04 ++#define UDESC_ENDPOINT 0x05 ++#define UDESC_SS_USB_COMPANION 0x30 ++#define UDESC_DEVICE_QUALIFIER 0x06 ++#define UDESC_OTHER_SPEED_CONFIGURATION 0x07 ++#define UDESC_INTERFACE_POWER 0x08 ++#define UDESC_OTG 0x09 ++#define WUDESC_SECURITY 0x0c ++#define WUDESC_KEY 0x0d ++#define WUD_GET_KEY_INDEX(_wValue_) ((_wValue_) & 0xf) ++#define WUD_GET_KEY_TYPE(_wValue_) (((_wValue_) & 0x30) >> 4) ++#define WUD_KEY_TYPE_ASSOC 0x01 ++#define WUD_KEY_TYPE_GTK 0x02 ++#define WUD_GET_KEY_ORIGIN(_wValue_) (((_wValue_) & 0x40) >> 6) ++#define WUD_KEY_ORIGIN_HOST 0x00 ++#define WUD_KEY_ORIGIN_DEVICE 0x01 ++#define WUDESC_ENCRYPTION_TYPE 0x0e ++#define WUDESC_BOS 0x0f ++#define WUDESC_DEVICE_CAPABILITY 0x10 ++#define WUDESC_WIRELESS_ENDPOINT_COMPANION 0x11 ++#define UDESC_BOS 0x0f ++#define UDESC_DEVICE_CAPABILITY 0x10 ++#define UDESC_CS_DEVICE 0x21 /* class specific */ ++#define UDESC_CS_CONFIG 0x22 ++#define UDESC_CS_STRING 0x23 ++#define UDESC_CS_INTERFACE 0x24 ++#define UDESC_CS_ENDPOINT 0x25 ++#define UDESC_HUB 0x29 ++#define UR_SET_DESCRIPTOR 0x07 ++#define UR_GET_CONFIG 0x08 ++#define UR_SET_CONFIG 0x09 ++#define UR_GET_INTERFACE 0x0a ++#define UR_SET_INTERFACE 0x0b ++#define UR_SYNCH_FRAME 0x0c ++#define WUR_SET_ENCRYPTION 0x0d ++#define WUR_GET_ENCRYPTION 0x0e ++#define WUR_SET_HANDSHAKE 0x0f ++#define WUR_GET_HANDSHAKE 0x10 ++#define WUR_SET_CONNECTION 0x11 ++#define WUR_SET_SECURITY_DATA 0x12 ++#define WUR_GET_SECURITY_DATA 0x13 ++#define WUR_SET_WUSB_DATA 0x14 ++#define WUDATA_DRPIE_INFO 0x01 ++#define WUDATA_TRANSMIT_DATA 0x02 ++#define WUDATA_TRANSMIT_PARAMS 0x03 ++#define WUDATA_RECEIVE_PARAMS 0x04 ++#define WUDATA_TRANSMIT_POWER 0x05 ++#define WUR_LOOPBACK_DATA_WRITE 0x15 ++#define WUR_LOOPBACK_DATA_READ 0x16 ++#define WUR_SET_INTERFACE_DS 0x17 ++ ++/* Feature numbers */ ++#define UF_ENDPOINT_HALT 0 ++#define UF_DEVICE_REMOTE_WAKEUP 1 ++#define UF_TEST_MODE 2 ++#define UF_DEVICE_B_HNP_ENABLE 3 ++#define UF_DEVICE_A_HNP_SUPPORT 4 ++#define UF_DEVICE_A_ALT_HNP_SUPPORT 5 ++#define WUF_WUSB 3 ++#define WUF_TX_DRPIE 0x0 ++#define WUF_DEV_XMIT_PACKET 0x1 ++#define WUF_COUNT_PACKETS 0x2 ++#define WUF_CAPTURE_PACKETS 0x3 ++#define UF_FUNCTION_SUSPEND 0 ++#define UF_U1_ENABLE 48 ++#define UF_U2_ENABLE 49 ++#define UF_LTM_ENABLE 50 ++ ++/* Class requests from the USB 2.0 hub spec, table 11-15 */ ++#define UCR_CLEAR_HUB_FEATURE (0x2000 | UR_CLEAR_FEATURE) ++#define UCR_CLEAR_PORT_FEATURE (0x2300 | UR_CLEAR_FEATURE) ++#define UCR_GET_HUB_DESCRIPTOR (0xa000 | UR_GET_DESCRIPTOR) ++#define UCR_GET_HUB_STATUS (0xa000 | UR_GET_STATUS) ++#define UCR_GET_PORT_STATUS (0xa300 | UR_GET_STATUS) ++#define UCR_SET_HUB_FEATURE (0x2000 | UR_SET_FEATURE) ++#define UCR_SET_PORT_FEATURE (0x2300 | UR_SET_FEATURE) ++#define UCR_SET_AND_TEST_PORT_FEATURE (0xa300 | UR_SET_AND_TEST_FEATURE) ++ ++#ifdef _MSC_VER ++#include ++#endif ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDescriptorSubtype; ++} UPACKED usb_descriptor_t; ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++} UPACKED usb_descriptor_header_t; ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord bcdUSB; ++#define UD_USB_2_0 0x0200 ++#define UD_IS_USB2(d) (UGETW((d)->bcdUSB) >= UD_USB_2_0) ++ uByte bDeviceClass; ++ uByte bDeviceSubClass; ++ uByte bDeviceProtocol; ++ uByte bMaxPacketSize; ++ /* The fields below are not part of the initial descriptor. */ ++ uWord idVendor; ++ uWord idProduct; ++ uWord bcdDevice; ++ uByte iManufacturer; ++ uByte iProduct; ++ uByte iSerialNumber; ++ uByte bNumConfigurations; ++} UPACKED usb_device_descriptor_t; ++#define USB_DEVICE_DESCRIPTOR_SIZE 18 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord wTotalLength; ++ uByte bNumInterface; ++ uByte bConfigurationValue; ++ uByte iConfiguration; ++#define UC_ATT_ONE (1 << 7) /* must be set */ ++#define UC_ATT_SELFPOWER (1 << 6) /* self powered */ ++#define UC_ATT_WAKEUP (1 << 5) /* can wakeup */ ++#define UC_ATT_BATTERY (1 << 4) /* battery powered */ ++ uByte bmAttributes; ++#define UC_BUS_POWERED 0x80 ++#define UC_SELF_POWERED 0x40 ++#define UC_REMOTE_WAKEUP 0x20 ++ uByte bMaxPower; /* max current in 2 mA units */ ++#define UC_POWER_FACTOR 2 ++} UPACKED usb_config_descriptor_t; ++#define USB_CONFIG_DESCRIPTOR_SIZE 9 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bInterfaceNumber; ++ uByte bAlternateSetting; ++ uByte bNumEndpoints; ++ uByte bInterfaceClass; ++ uByte bInterfaceSubClass; ++ uByte bInterfaceProtocol; ++ uByte iInterface; ++} UPACKED usb_interface_descriptor_t; ++#define USB_INTERFACE_DESCRIPTOR_SIZE 9 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bEndpointAddress; ++#define UE_GET_DIR(a) ((a) & 0x80) ++#define UE_SET_DIR(a,d) ((a) | (((d)&1) << 7)) ++#define UE_DIR_IN 0x80 ++#define UE_DIR_OUT 0x00 ++#define UE_ADDR 0x0f ++#define UE_GET_ADDR(a) ((a) & UE_ADDR) ++ uByte bmAttributes; ++#define UE_XFERTYPE 0x03 ++#define UE_CONTROL 0x00 ++#define UE_ISOCHRONOUS 0x01 ++#define UE_BULK 0x02 ++#define UE_INTERRUPT 0x03 ++#define UE_GET_XFERTYPE(a) ((a) & UE_XFERTYPE) ++#define UE_ISO_TYPE 0x0c ++#define UE_ISO_ASYNC 0x04 ++#define UE_ISO_ADAPT 0x08 ++#define UE_ISO_SYNC 0x0c ++#define UE_GET_ISO_TYPE(a) ((a) & UE_ISO_TYPE) ++ uWord wMaxPacketSize; ++ uByte bInterval; ++} UPACKED usb_endpoint_descriptor_t; ++#define USB_ENDPOINT_DESCRIPTOR_SIZE 7 ++ ++typedef struct ss_endpoint_companion_descriptor { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bMaxBurst; ++#define USSE_GET_MAX_STREAMS(a) ((a) & 0x1f) ++#define USSE_SET_MAX_STREAMS(a, b) ((a) | ((b) & 0x1f)) ++#define USSE_GET_MAX_PACKET_NUM(a) ((a) & 0x03) ++#define USSE_SET_MAX_PACKET_NUM(a, b) ((a) | ((b) & 0x03)) ++ uByte bmAttributes; ++ uWord wBytesPerInterval; ++} UPACKED ss_endpoint_companion_descriptor_t; ++#define USB_SS_ENDPOINT_COMPANION_DESCRIPTOR_SIZE 6 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord bString[127]; ++} UPACKED usb_string_descriptor_t; ++#define USB_MAX_STRING_LEN 128 ++#define USB_LANGUAGE_TABLE 0 /* # of the string language id table */ ++ ++/* Hub specific request */ ++#define UR_GET_BUS_STATE 0x02 ++#define UR_CLEAR_TT_BUFFER 0x08 ++#define UR_RESET_TT 0x09 ++#define UR_GET_TT_STATE 0x0a ++#define UR_STOP_TT 0x0b ++ ++/* Hub features */ ++#define UHF_C_HUB_LOCAL_POWER 0 ++#define UHF_C_HUB_OVER_CURRENT 1 ++#define UHF_PORT_CONNECTION 0 ++#define UHF_PORT_ENABLE 1 ++#define UHF_PORT_SUSPEND 2 ++#define UHF_PORT_OVER_CURRENT 3 ++#define UHF_PORT_RESET 4 ++#define UHF_PORT_L1 5 ++#define UHF_PORT_POWER 8 ++#define UHF_PORT_LOW_SPEED 9 ++#define UHF_PORT_HIGH_SPEED 10 ++#define UHF_C_PORT_CONNECTION 16 ++#define UHF_C_PORT_ENABLE 17 ++#define UHF_C_PORT_SUSPEND 18 ++#define UHF_C_PORT_OVER_CURRENT 19 ++#define UHF_C_PORT_RESET 20 ++#define UHF_C_PORT_L1 23 ++#define UHF_PORT_TEST 21 ++#define UHF_PORT_INDICATOR 22 ++ ++typedef struct { ++ uByte bDescLength; ++ uByte bDescriptorType; ++ uByte bNbrPorts; ++ uWord wHubCharacteristics; ++#define UHD_PWR 0x0003 ++#define UHD_PWR_GANGED 0x0000 ++#define UHD_PWR_INDIVIDUAL 0x0001 ++#define UHD_PWR_NO_SWITCH 0x0002 ++#define UHD_COMPOUND 0x0004 ++#define UHD_OC 0x0018 ++#define UHD_OC_GLOBAL 0x0000 ++#define UHD_OC_INDIVIDUAL 0x0008 ++#define UHD_OC_NONE 0x0010 ++#define UHD_TT_THINK 0x0060 ++#define UHD_TT_THINK_8 0x0000 ++#define UHD_TT_THINK_16 0x0020 ++#define UHD_TT_THINK_24 0x0040 ++#define UHD_TT_THINK_32 0x0060 ++#define UHD_PORT_IND 0x0080 ++ uByte bPwrOn2PwrGood; /* delay in 2 ms units */ ++#define UHD_PWRON_FACTOR 2 ++ uByte bHubContrCurrent; ++ uByte DeviceRemovable[32]; /* max 255 ports */ ++#define UHD_NOT_REMOV(desc, i) \ ++ (((desc)->DeviceRemovable[(i)/8] >> ((i) % 8)) & 1) ++ /* deprecated */ uByte PortPowerCtrlMask[1]; ++} UPACKED usb_hub_descriptor_t; ++#define USB_HUB_DESCRIPTOR_SIZE 9 /* includes deprecated PortPowerCtrlMask */ ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord bcdUSB; ++ uByte bDeviceClass; ++ uByte bDeviceSubClass; ++ uByte bDeviceProtocol; ++ uByte bMaxPacketSize0; ++ uByte bNumConfigurations; ++ uByte bReserved; ++} UPACKED usb_device_qualifier_t; ++#define USB_DEVICE_QUALIFIER_SIZE 10 ++ ++typedef struct { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bmAttributes; ++#define UOTG_SRP 0x01 ++#define UOTG_HNP 0x02 ++} UPACKED usb_otg_descriptor_t; ++ ++/* OTG feature selectors */ ++#define UOTG_B_HNP_ENABLE 3 ++#define UOTG_A_HNP_SUPPORT 4 ++#define UOTG_A_ALT_HNP_SUPPORT 5 ++ ++typedef struct { ++ uWord wStatus; ++/* Device status flags */ ++#define UDS_SELF_POWERED 0x0001 ++#define UDS_REMOTE_WAKEUP 0x0002 ++/* Endpoint status flags */ ++#define UES_HALT 0x0001 ++} UPACKED usb_status_t; ++ ++typedef struct { ++ uWord wHubStatus; ++#define UHS_LOCAL_POWER 0x0001 ++#define UHS_OVER_CURRENT 0x0002 ++ uWord wHubChange; ++} UPACKED usb_hub_status_t; ++ ++typedef struct { ++ uWord wPortStatus; ++#define UPS_CURRENT_CONNECT_STATUS 0x0001 ++#define UPS_PORT_ENABLED 0x0002 ++#define UPS_SUSPEND 0x0004 ++#define UPS_OVERCURRENT_INDICATOR 0x0008 ++#define UPS_RESET 0x0010 ++#define UPS_PORT_POWER 0x0100 ++#define UPS_LOW_SPEED 0x0200 ++#define UPS_HIGH_SPEED 0x0400 ++#define UPS_PORT_TEST 0x0800 ++#define UPS_PORT_INDICATOR 0x1000 ++ uWord wPortChange; ++#define UPS_C_CONNECT_STATUS 0x0001 ++#define UPS_C_PORT_ENABLED 0x0002 ++#define UPS_C_SUSPEND 0x0004 ++#define UPS_C_OVERCURRENT_INDICATOR 0x0008 ++#define UPS_C_PORT_RESET 0x0010 ++} UPACKED usb_port_status_t; ++ ++#ifdef _MSC_VER ++#include ++#endif ++ ++/* Device class codes */ ++#define UDCLASS_IN_INTERFACE 0x00 ++#define UDCLASS_COMM 0x02 ++#define UDCLASS_HUB 0x09 ++#define UDSUBCLASS_HUB 0x00 ++#define UDPROTO_FSHUB 0x00 ++#define UDPROTO_HSHUBSTT 0x01 ++#define UDPROTO_HSHUBMTT 0x02 ++#define UDCLASS_DIAGNOSTIC 0xdc ++#define UDCLASS_WIRELESS 0xe0 ++#define UDSUBCLASS_RF 0x01 ++#define UDPROTO_BLUETOOTH 0x01 ++#define UDCLASS_VENDOR 0xff ++ ++/* Interface class codes */ ++#define UICLASS_UNSPEC 0x00 ++ ++#define UICLASS_AUDIO 0x01 ++#define UISUBCLASS_AUDIOCONTROL 1 ++#define UISUBCLASS_AUDIOSTREAM 2 ++#define UISUBCLASS_MIDISTREAM 3 ++ ++#define UICLASS_CDC 0x02 /* communication */ ++#define UISUBCLASS_DIRECT_LINE_CONTROL_MODEL 1 ++#define UISUBCLASS_ABSTRACT_CONTROL_MODEL 2 ++#define UISUBCLASS_TELEPHONE_CONTROL_MODEL 3 ++#define UISUBCLASS_MULTICHANNEL_CONTROL_MODEL 4 ++#define UISUBCLASS_CAPI_CONTROLMODEL 5 ++#define UISUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL 6 ++#define UISUBCLASS_ATM_NETWORKING_CONTROL_MODEL 7 ++#define UIPROTO_CDC_AT 1 ++ ++#define UICLASS_HID 0x03 ++#define UISUBCLASS_BOOT 1 ++#define UIPROTO_BOOT_KEYBOARD 1 ++ ++#define UICLASS_PHYSICAL 0x05 ++ ++#define UICLASS_IMAGE 0x06 ++ ++#define UICLASS_PRINTER 0x07 ++#define UISUBCLASS_PRINTER 1 ++#define UIPROTO_PRINTER_UNI 1 ++#define UIPROTO_PRINTER_BI 2 ++#define UIPROTO_PRINTER_1284 3 ++ ++#define UICLASS_MASS 0x08 ++#define UISUBCLASS_RBC 1 ++#define UISUBCLASS_SFF8020I 2 ++#define UISUBCLASS_QIC157 3 ++#define UISUBCLASS_UFI 4 ++#define UISUBCLASS_SFF8070I 5 ++#define UISUBCLASS_SCSI 6 ++#define UIPROTO_MASS_CBI_I 0 ++#define UIPROTO_MASS_CBI 1 ++#define UIPROTO_MASS_BBB_OLD 2 /* Not in the spec anymore */ ++#define UIPROTO_MASS_BBB 80 /* 'P' for the Iomega Zip drive */ ++ ++#define UICLASS_HUB 0x09 ++#define UISUBCLASS_HUB 0 ++#define UIPROTO_FSHUB 0 ++#define UIPROTO_HSHUBSTT 0 /* Yes, same as previous */ ++#define UIPROTO_HSHUBMTT 1 ++ ++#define UICLASS_CDC_DATA 0x0a ++#define UISUBCLASS_DATA 0 ++#define UIPROTO_DATA_ISDNBRI 0x30 /* Physical iface */ ++#define UIPROTO_DATA_HDLC 0x31 /* HDLC */ ++#define UIPROTO_DATA_TRANSPARENT 0x32 /* Transparent */ ++#define UIPROTO_DATA_Q921M 0x50 /* Management for Q921 */ ++#define UIPROTO_DATA_Q921 0x51 /* Data for Q921 */ ++#define UIPROTO_DATA_Q921TM 0x52 /* TEI multiplexer for Q921 */ ++#define UIPROTO_DATA_V42BIS 0x90 /* Data compression */ ++#define UIPROTO_DATA_Q931 0x91 /* Euro-ISDN */ ++#define UIPROTO_DATA_V120 0x92 /* V.24 rate adaption */ ++#define UIPROTO_DATA_CAPI 0x93 /* CAPI 2.0 commands */ ++#define UIPROTO_DATA_HOST_BASED 0xfd /* Host based driver */ ++#define UIPROTO_DATA_PUF 0xfe /* see Prot. Unit Func. Desc.*/ ++#define UIPROTO_DATA_VENDOR 0xff /* Vendor specific */ ++ ++#define UICLASS_SMARTCARD 0x0b ++ ++/*#define UICLASS_FIRM_UPD 0x0c*/ ++ ++#define UICLASS_SECURITY 0x0d ++ ++#define UICLASS_DIAGNOSTIC 0xdc ++ ++#define UICLASS_WIRELESS 0xe0 ++#define UISUBCLASS_RF 0x01 ++#define UIPROTO_BLUETOOTH 0x01 ++ ++#define UICLASS_APPL_SPEC 0xfe ++#define UISUBCLASS_FIRMWARE_DOWNLOAD 1 ++#define UISUBCLASS_IRDA 2 ++#define UIPROTO_IRDA 0 ++ ++#define UICLASS_VENDOR 0xff ++ ++#define USB_HUB_MAX_DEPTH 5 ++ ++/* ++ * Minimum time a device needs to be powered down to go through ++ * a power cycle. XXX Are these time in the spec? ++ */ ++#define USB_POWER_DOWN_TIME 200 /* ms */ ++#define USB_PORT_POWER_DOWN_TIME 100 /* ms */ ++ ++#if 0 ++/* These are the values from the spec. */ ++#define USB_PORT_RESET_DELAY 10 /* ms */ ++#define USB_PORT_ROOT_RESET_DELAY 50 /* ms */ ++#define USB_PORT_RESET_RECOVERY 10 /* ms */ ++#define USB_PORT_POWERUP_DELAY 100 /* ms */ ++#define USB_SET_ADDRESS_SETTLE 2 /* ms */ ++#define USB_RESUME_DELAY (20*5) /* ms */ ++#define USB_RESUME_WAIT 10 /* ms */ ++#define USB_RESUME_RECOVERY 10 /* ms */ ++#define USB_EXTRA_POWER_UP_TIME 0 /* ms */ ++#else ++/* Allow for marginal (i.e. non-conforming) devices. */ ++#define USB_PORT_RESET_DELAY 50 /* ms */ ++#define USB_PORT_ROOT_RESET_DELAY 250 /* ms */ ++#define USB_PORT_RESET_RECOVERY 250 /* ms */ ++#define USB_PORT_POWERUP_DELAY 300 /* ms */ ++#define USB_SET_ADDRESS_SETTLE 10 /* ms */ ++#define USB_RESUME_DELAY (50*5) /* ms */ ++#define USB_RESUME_WAIT 50 /* ms */ ++#define USB_RESUME_RECOVERY 50 /* ms */ ++#define USB_EXTRA_POWER_UP_TIME 20 /* ms */ ++#endif ++ ++#define USB_MIN_POWER 100 /* mA */ ++#define USB_MAX_POWER 500 /* mA */ ++ ++#define USB_BUS_RESET_DELAY 100 /* ms XXX?*/ ++ ++#define USB_UNCONFIG_NO 0 ++#define USB_UNCONFIG_INDEX (-1) ++ ++/*** ioctl() related stuff ***/ ++ ++struct usb_ctl_request { ++ int ucr_addr; ++ usb_device_request_t ucr_request; ++ void *ucr_data; ++ int ucr_flags; ++#define USBD_SHORT_XFER_OK 0x04 /* allow short reads */ ++ int ucr_actlen; /* actual length transferred */ ++}; ++ ++struct usb_alt_interface { ++ int uai_config_index; ++ int uai_interface_index; ++ int uai_alt_no; ++}; ++ ++#define USB_CURRENT_CONFIG_INDEX (-1) ++#define USB_CURRENT_ALT_INDEX (-1) ++ ++struct usb_config_desc { ++ int ucd_config_index; ++ usb_config_descriptor_t ucd_desc; ++}; ++ ++struct usb_interface_desc { ++ int uid_config_index; ++ int uid_interface_index; ++ int uid_alt_index; ++ usb_interface_descriptor_t uid_desc; ++}; ++ ++struct usb_endpoint_desc { ++ int ued_config_index; ++ int ued_interface_index; ++ int ued_alt_index; ++ int ued_endpoint_index; ++ usb_endpoint_descriptor_t ued_desc; ++}; ++ ++struct usb_full_desc { ++ int ufd_config_index; ++ u_int ufd_size; ++ u_char *ufd_data; ++}; ++ ++struct usb_string_desc { ++ int usd_string_index; ++ int usd_language_id; ++ usb_string_descriptor_t usd_desc; ++}; ++ ++struct usb_ctl_report_desc { ++ int ucrd_size; ++ u_char ucrd_data[1024]; /* filled data size will vary */ ++}; ++ ++typedef struct { u_int32_t cookie; } usb_event_cookie_t; ++ ++#define USB_MAX_DEVNAMES 4 ++#define USB_MAX_DEVNAMELEN 16 ++struct usb_device_info { ++ u_int8_t udi_bus; ++ u_int8_t udi_addr; /* device address */ ++ usb_event_cookie_t udi_cookie; ++ char udi_product[USB_MAX_STRING_LEN]; ++ char udi_vendor[USB_MAX_STRING_LEN]; ++ char udi_release[8]; ++ u_int16_t udi_productNo; ++ u_int16_t udi_vendorNo; ++ u_int16_t udi_releaseNo; ++ u_int8_t udi_class; ++ u_int8_t udi_subclass; ++ u_int8_t udi_protocol; ++ u_int8_t udi_config; ++ u_int8_t udi_speed; ++#define USB_SPEED_UNKNOWN 0 ++#define USB_SPEED_LOW 1 ++#define USB_SPEED_FULL 2 ++#define USB_SPEED_HIGH 3 ++#define USB_SPEED_VARIABLE 4 ++#define USB_SPEED_SUPER 5 ++ int udi_power; /* power consumption in mA, 0 if selfpowered */ ++ int udi_nports; ++ char udi_devnames[USB_MAX_DEVNAMES][USB_MAX_DEVNAMELEN]; ++ u_int8_t udi_ports[16];/* hub only: addresses of devices on ports */ ++#define USB_PORT_ENABLED 0xff ++#define USB_PORT_SUSPENDED 0xfe ++#define USB_PORT_POWERED 0xfd ++#define USB_PORT_DISABLED 0xfc ++}; ++ ++struct usb_ctl_report { ++ int ucr_report; ++ u_char ucr_data[1024]; /* filled data size will vary */ ++}; ++ ++struct usb_device_stats { ++ u_long uds_requests[4]; /* indexed by transfer type UE_* */ ++}; ++ ++#define WUSB_MIN_IE 0x80 ++#define WUSB_WCTA_IE 0x80 ++#define WUSB_WCONNECTACK_IE 0x81 ++#define WUSB_WHOSTINFO_IE 0x82 ++#define WUHI_GET_CA(_bmAttributes_) ((_bmAttributes_) & 0x3) ++#define WUHI_CA_RECONN 0x00 ++#define WUHI_CA_LIMITED 0x01 ++#define WUHI_CA_ALL 0x03 ++#define WUHI_GET_MLSI(_bmAttributes_) (((_bmAttributes_) & 0x38) >> 3) ++#define WUSB_WCHCHANGEANNOUNCE_IE 0x83 ++#define WUSB_WDEV_DISCONNECT_IE 0x84 ++#define WUSB_WHOST_DISCONNECT_IE 0x85 ++#define WUSB_WRELEASE_CHANNEL_IE 0x86 ++#define WUSB_WWORK_IE 0x87 ++#define WUSB_WCHANNEL_STOP_IE 0x88 ++#define WUSB_WDEV_KEEPALIVE_IE 0x89 ++#define WUSB_WISOCH_DISCARD_IE 0x8A ++#define WUSB_WRESETDEVICE_IE 0x8B ++#define WUSB_WXMIT_PACKET_ADJUST_IE 0x8C ++#define WUSB_MAX_IE 0x8C ++ ++/* Device Notification Types */ ++ ++#define WUSB_DN_MIN 0x01 ++#define WUSB_DN_CONNECT 0x01 ++# define WUSB_DA_OLDCONN 0x00 ++# define WUSB_DA_NEWCONN 0x01 ++# define WUSB_DA_SELF_BEACON 0x02 ++# define WUSB_DA_DIR_BEACON 0x04 ++# define WUSB_DA_NO_BEACON 0x06 ++#define WUSB_DN_DISCONNECT 0x02 ++#define WUSB_DN_EPRDY 0x03 ++#define WUSB_DN_MASAVAILCHANGED 0x04 ++#define WUSB_DN_REMOTEWAKEUP 0x05 ++#define WUSB_DN_SLEEP 0x06 ++#define WUSB_DN_ALIVE 0x07 ++#define WUSB_DN_MAX 0x07 ++ ++#ifdef _MSC_VER ++#include ++#endif ++ ++/* WUSB Handshake Data. Used during the SET/GET HANDSHAKE requests */ ++typedef struct wusb_hndshk_data { ++ uByte bMessageNumber; ++ uByte bStatus; ++ uByte tTKID[3]; ++ uByte bReserved; ++ uByte CDID[16]; ++ uByte Nonce[16]; ++ uByte MIC[8]; ++} UPACKED wusb_hndshk_data_t; ++#define WUSB_HANDSHAKE_LEN_FOR_MIC 38 ++ ++/* WUSB Connection Context */ ++typedef struct wusb_conn_context { ++ uByte CHID [16]; ++ uByte CDID [16]; ++ uByte CK [16]; ++} UPACKED wusb_conn_context_t; ++ ++/* WUSB Security Descriptor */ ++typedef struct wusb_security_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord wTotalLength; ++ uByte bNumEncryptionTypes; ++} UPACKED wusb_security_desc_t; ++ ++/* WUSB Encryption Type Descriptor */ ++typedef struct wusb_encrypt_type_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ ++ uByte bEncryptionType; ++#define WUETD_UNSECURE 0 ++#define WUETD_WIRED 1 ++#define WUETD_CCM_1 2 ++#define WUETD_RSA_1 3 ++ ++ uByte bEncryptionValue; ++ uByte bAuthKeyIndex; ++} UPACKED wusb_encrypt_type_desc_t; ++ ++/* WUSB Key Descriptor */ ++typedef struct wusb_key_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte tTKID[3]; ++ uByte bReserved; ++ uByte KeyData[1]; /* variable length */ ++} UPACKED wusb_key_desc_t; ++ ++/* WUSB BOS Descriptor (Binary device Object Store) */ ++typedef struct wusb_bos_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uWord wTotalLength; ++ uByte bNumDeviceCaps; ++} UPACKED wusb_bos_desc_t; ++ ++#define USB_DEVICE_CAPABILITY_20_EXTENSION 0x02 ++typedef struct usb_dev_cap_20_ext_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDevCapabilityType; ++#define USB_20_EXT_LPM 0x02 ++ uDWord bmAttributes; ++} UPACKED usb_dev_cap_20_ext_desc_t; ++ ++#define USB_DEVICE_CAPABILITY_SS_USB 0x03 ++typedef struct usb_dev_cap_ss_usb { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDevCapabilityType; ++#define USB_DC_SS_USB_LTM_CAPABLE 0x02 ++ uByte bmAttributes; ++#define USB_DC_SS_USB_SPEED_SUPPORT_LOW 0x01 ++#define USB_DC_SS_USB_SPEED_SUPPORT_FULL 0x02 ++#define USB_DC_SS_USB_SPEED_SUPPORT_HIGH 0x04 ++#define USB_DC_SS_USB_SPEED_SUPPORT_SS 0x08 ++ uWord wSpeedsSupported; ++ uByte bFunctionalitySupport; ++ uByte bU1DevExitLat; ++ uWord wU2DevExitLat; ++} UPACKED usb_dev_cap_ss_usb_t; ++ ++#define USB_DEVICE_CAPABILITY_CONTAINER_ID 0x04 ++typedef struct usb_dev_cap_container_id { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDevCapabilityType; ++ uByte bReserved; ++ uByte containerID[16]; ++} UPACKED usb_dev_cap_container_id_t; ++ ++/* Device Capability Type Codes */ ++#define WUSB_DEVICE_CAPABILITY_WIRELESS_USB 0x01 ++ ++/* Device Capability Descriptor */ ++typedef struct wusb_dev_cap_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDevCapabilityType; ++ uByte caps[1]; /* Variable length */ ++} UPACKED wusb_dev_cap_desc_t; ++ ++/* Device Capability Descriptor */ ++typedef struct wusb_dev_cap_uwb_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bDevCapabilityType; ++ uByte bmAttributes; ++ uWord wPHYRates; /* Bitmap */ ++ uByte bmTFITXPowerInfo; ++ uByte bmFFITXPowerInfo; ++ uWord bmBandGroup; ++ uByte bReserved; ++} UPACKED wusb_dev_cap_uwb_desc_t; ++ ++/* Wireless USB Endpoint Companion Descriptor */ ++typedef struct wusb_endpoint_companion_desc { ++ uByte bLength; ++ uByte bDescriptorType; ++ uByte bMaxBurst; ++ uByte bMaxSequence; ++ uWord wMaxStreamDelay; ++ uWord wOverTheAirPacketSize; ++ uByte bOverTheAirInterval; ++ uByte bmCompAttributes; ++} UPACKED wusb_endpoint_companion_desc_t; ++ ++/* Wireless USB Numeric Association M1 Data Structure */ ++typedef struct wusb_m1_data { ++ uByte version; ++ uWord langId; ++ uByte deviceFriendlyNameLength; ++ uByte sha_256_m3[32]; ++ uByte deviceFriendlyName[256]; ++} UPACKED wusb_m1_data_t; ++ ++typedef struct wusb_m2_data { ++ uByte version; ++ uWord langId; ++ uByte hostFriendlyNameLength; ++ uByte pkh[384]; ++ uByte hostFriendlyName[256]; ++} UPACKED wusb_m2_data_t; ++ ++typedef struct wusb_m3_data { ++ uByte pkd[384]; ++ uByte nd; ++} UPACKED wusb_m3_data_t; ++ ++typedef struct wusb_m4_data { ++ uDWord _attributeTypeIdAndLength_1; ++ uWord associationTypeId; ++ ++ uDWord _attributeTypeIdAndLength_2; ++ uWord associationSubTypeId; ++ ++ uDWord _attributeTypeIdAndLength_3; ++ uDWord length; ++ ++ uDWord _attributeTypeIdAndLength_4; ++ uDWord associationStatus; ++ ++ uDWord _attributeTypeIdAndLength_5; ++ uByte chid[16]; ++ ++ uDWord _attributeTypeIdAndLength_6; ++ uByte cdid[16]; ++ ++ uDWord _attributeTypeIdAndLength_7; ++ uByte bandGroups[2]; ++} UPACKED wusb_m4_data_t; ++ ++#ifdef _MSC_VER ++#include ++#endif ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif /* _USB_H_ */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/Makefile +@@ -0,0 +1,82 @@ ++# ++# Makefile for DWC_otg Highspeed USB controller driver ++# ++ ++ifneq ($(KERNELRELEASE),) ++ ++# Use the BUS_INTERFACE variable to compile the software for either ++# PCI(PCI_INTERFACE) or LM(LM_INTERFACE) bus. ++ifeq ($(BUS_INTERFACE),) ++# BUS_INTERFACE = -DPCI_INTERFACE ++# BUS_INTERFACE = -DLM_INTERFACE ++ BUS_INTERFACE = -DPLATFORM_INTERFACE ++endif ++ ++#ccflags-y += -DDEBUG ++#ccflags-y += -DDWC_OTG_DEBUGLEV=1 # reduce common debug msgs ++ ++# Use one of the following flags to compile the software in host-only or ++# device-only mode. ++#ccflags-y += -DDWC_HOST_ONLY ++#ccflags-y += -DDWC_DEVICE_ONLY ++ ++ccflags-y += -Dlinux -DDWC_HS_ELECT_TST ++#ccflags-y += -DDWC_EN_ISOC ++ccflags-y += -I$(obj)/../dwc_common_port ++#ccflags-y += -I$(PORTLIB) ++ccflags-y += -DDWC_LINUX ++ccflags-y += $(CFI) ++ccflags-y += $(BUS_INTERFACE) ++#ccflags-y += -DDWC_DEV_SRPCAP ++ ++obj-$(CONFIG_USB_DWCOTG) += dwc_otg.o ++ ++dwc_otg-objs := dwc_otg_driver.o dwc_otg_attr.o ++dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o ++dwc_otg-objs += dwc_otg_pcd_linux.o dwc_otg_pcd.o dwc_otg_pcd_intr.o ++dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_linux.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o dwc_otg_hcd_ddma.o ++dwc_otg-objs += dwc_otg_adp.o ++dwc_otg-objs += dwc_otg_fiq_fsm.o ++dwc_otg-objs += dwc_otg_fiq_stub.o ++ifneq ($(CFI),) ++dwc_otg-objs += dwc_otg_cfi.o ++endif ++ ++kernrelwd := $(subst ., ,$(KERNELRELEASE)) ++kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd)) ++ ++ifneq ($(kernrel3),2.6.20) ++ccflags-y += $(CPPFLAGS) ++endif ++ ++else ++ ++PWD := $(shell pwd) ++PORTLIB := $(PWD)/../dwc_common_port ++ ++# Command paths ++CTAGS := $(CTAGS) ++DOXYGEN := $(DOXYGEN) ++ ++default: portlib ++ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules ++ ++install: default ++ $(MAKE) -C$(KDIR) M=$(PORTLIB) modules_install ++ $(MAKE) -C$(KDIR) M=$(PWD) modules_install ++ ++portlib: ++ $(MAKE) -C$(KDIR) M=$(PORTLIB) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules ++ cp $(PORTLIB)/Module.symvers $(PWD)/ ++ ++docs: $(wildcard *.[hc]) doc/doxygen.cfg ++ $(DOXYGEN) doc/doxygen.cfg ++ ++tags: $(wildcard *.[hc]) ++ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) ++ ++ ++clean: ++ rm -rf *.o *.ko .*cmd *.mod.c .tmp_versions Module.symvers ++ ++endif +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/doc/doxygen.cfg +@@ -0,0 +1,224 @@ ++# Doxyfile 1.3.9.1 ++ ++#--------------------------------------------------------------------------- ++# Project related configuration options ++#--------------------------------------------------------------------------- ++PROJECT_NAME = "DesignWare USB 2.0 OTG Controller (DWC_otg) Device Driver" ++PROJECT_NUMBER = v3.00a ++OUTPUT_DIRECTORY = ./doc/ ++CREATE_SUBDIRS = NO ++OUTPUT_LANGUAGE = English ++BRIEF_MEMBER_DESC = YES ++REPEAT_BRIEF = YES ++ABBREVIATE_BRIEF = "The $name class" \ ++ "The $name widget" \ ++ "The $name file" \ ++ is \ ++ provides \ ++ specifies \ ++ contains \ ++ represents \ ++ a \ ++ an \ ++ the ++ALWAYS_DETAILED_SEC = NO ++INLINE_INHERITED_MEMB = NO ++FULL_PATH_NAMES = NO ++STRIP_FROM_PATH = ++STRIP_FROM_INC_PATH = ++SHORT_NAMES = NO ++JAVADOC_AUTOBRIEF = YES ++MULTILINE_CPP_IS_BRIEF = NO ++INHERIT_DOCS = YES ++DISTRIBUTE_GROUP_DOC = NO ++TAB_SIZE = 8 ++ALIASES = ++OPTIMIZE_OUTPUT_FOR_C = YES ++OPTIMIZE_OUTPUT_JAVA = NO ++SUBGROUPING = YES ++#--------------------------------------------------------------------------- ++# Build related configuration options ++#--------------------------------------------------------------------------- ++EXTRACT_ALL = NO ++EXTRACT_PRIVATE = YES ++EXTRACT_STATIC = YES ++EXTRACT_LOCAL_CLASSES = YES ++EXTRACT_LOCAL_METHODS = NO ++HIDE_UNDOC_MEMBERS = NO ++HIDE_UNDOC_CLASSES = NO ++HIDE_FRIEND_COMPOUNDS = NO ++HIDE_IN_BODY_DOCS = NO ++INTERNAL_DOCS = NO ++CASE_SENSE_NAMES = NO ++HIDE_SCOPE_NAMES = NO ++SHOW_INCLUDE_FILES = YES ++INLINE_INFO = YES ++SORT_MEMBER_DOCS = NO ++SORT_BRIEF_DOCS = NO ++SORT_BY_SCOPE_NAME = NO ++GENERATE_TODOLIST = YES ++GENERATE_TESTLIST = YES ++GENERATE_BUGLIST = YES ++GENERATE_DEPRECATEDLIST= YES ++ENABLED_SECTIONS = ++MAX_INITIALIZER_LINES = 30 ++SHOW_USED_FILES = YES ++SHOW_DIRECTORIES = YES ++#--------------------------------------------------------------------------- ++# configuration options related to warning and progress messages ++#--------------------------------------------------------------------------- ++QUIET = YES ++WARNINGS = YES ++WARN_IF_UNDOCUMENTED = NO ++WARN_IF_DOC_ERROR = YES ++WARN_FORMAT = "$file:$line: $text" ++WARN_LOGFILE = ++#--------------------------------------------------------------------------- ++# configuration options related to the input files ++#--------------------------------------------------------------------------- ++INPUT = . ++FILE_PATTERNS = *.c \ ++ *.h \ ++ ./linux/*.c \ ++ ./linux/*.h ++RECURSIVE = NO ++EXCLUDE = ./test/ \ ++ ./dwc_otg/.AppleDouble/ ++EXCLUDE_SYMLINKS = YES ++EXCLUDE_PATTERNS = *.mod.* ++EXAMPLE_PATH = ++EXAMPLE_PATTERNS = * ++EXAMPLE_RECURSIVE = NO ++IMAGE_PATH = ++INPUT_FILTER = ++FILTER_PATTERNS = ++FILTER_SOURCE_FILES = NO ++#--------------------------------------------------------------------------- ++# configuration options related to source browsing ++#--------------------------------------------------------------------------- ++SOURCE_BROWSER = YES ++INLINE_SOURCES = NO ++STRIP_CODE_COMMENTS = YES ++REFERENCED_BY_RELATION = NO ++REFERENCES_RELATION = NO ++VERBATIM_HEADERS = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the alphabetical class index ++#--------------------------------------------------------------------------- ++ALPHABETICAL_INDEX = NO ++COLS_IN_ALPHA_INDEX = 5 ++IGNORE_PREFIX = ++#--------------------------------------------------------------------------- ++# configuration options related to the HTML output ++#--------------------------------------------------------------------------- ++GENERATE_HTML = YES ++HTML_OUTPUT = html ++HTML_FILE_EXTENSION = .html ++HTML_HEADER = ++HTML_FOOTER = ++HTML_STYLESHEET = ++HTML_ALIGN_MEMBERS = YES ++GENERATE_HTMLHELP = NO ++CHM_FILE = ++HHC_LOCATION = ++GENERATE_CHI = NO ++BINARY_TOC = NO ++TOC_EXPAND = NO ++DISABLE_INDEX = NO ++ENUM_VALUES_PER_LINE = 4 ++GENERATE_TREEVIEW = YES ++TREEVIEW_WIDTH = 250 ++#--------------------------------------------------------------------------- ++# configuration options related to the LaTeX output ++#--------------------------------------------------------------------------- ++GENERATE_LATEX = NO ++LATEX_OUTPUT = latex ++LATEX_CMD_NAME = latex ++MAKEINDEX_CMD_NAME = makeindex ++COMPACT_LATEX = NO ++PAPER_TYPE = a4wide ++EXTRA_PACKAGES = ++LATEX_HEADER = ++PDF_HYPERLINKS = NO ++USE_PDFLATEX = NO ++LATEX_BATCHMODE = NO ++LATEX_HIDE_INDICES = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the RTF output ++#--------------------------------------------------------------------------- ++GENERATE_RTF = NO ++RTF_OUTPUT = rtf ++COMPACT_RTF = NO ++RTF_HYPERLINKS = NO ++RTF_STYLESHEET_FILE = ++RTF_EXTENSIONS_FILE = ++#--------------------------------------------------------------------------- ++# configuration options related to the man page output ++#--------------------------------------------------------------------------- ++GENERATE_MAN = NO ++MAN_OUTPUT = man ++MAN_EXTENSION = .3 ++MAN_LINKS = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the XML output ++#--------------------------------------------------------------------------- ++GENERATE_XML = NO ++XML_OUTPUT = xml ++XML_SCHEMA = ++XML_DTD = ++XML_PROGRAMLISTING = YES ++#--------------------------------------------------------------------------- ++# configuration options for the AutoGen Definitions output ++#--------------------------------------------------------------------------- ++GENERATE_AUTOGEN_DEF = NO ++#--------------------------------------------------------------------------- ++# configuration options related to the Perl module output ++#--------------------------------------------------------------------------- ++GENERATE_PERLMOD = NO ++PERLMOD_LATEX = NO ++PERLMOD_PRETTY = YES ++PERLMOD_MAKEVAR_PREFIX = ++#--------------------------------------------------------------------------- ++# Configuration options related to the preprocessor ++#--------------------------------------------------------------------------- ++ENABLE_PREPROCESSING = YES ++MACRO_EXPANSION = YES ++EXPAND_ONLY_PREDEF = YES ++SEARCH_INCLUDES = YES ++INCLUDE_PATH = ++INCLUDE_FILE_PATTERNS = ++PREDEFINED = DEVICE_ATTR DWC_EN_ISOC ++EXPAND_AS_DEFINED = DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW DWC_OTG_DEVICE_ATTR_BITFIELD_STORE DWC_OTG_DEVICE_ATTR_BITFIELD_RW DWC_OTG_DEVICE_ATTR_BITFIELD_RO DWC_OTG_DEVICE_ATTR_REG_SHOW DWC_OTG_DEVICE_ATTR_REG_STORE DWC_OTG_DEVICE_ATTR_REG32_RW DWC_OTG_DEVICE_ATTR_REG32_RO DWC_EN_ISOC ++SKIP_FUNCTION_MACROS = NO ++#--------------------------------------------------------------------------- ++# Configuration::additions related to external references ++#--------------------------------------------------------------------------- ++TAGFILES = ++GENERATE_TAGFILE = ++ALLEXTERNALS = NO ++EXTERNAL_GROUPS = YES ++PERL_PATH = /usr/bin/perl ++#--------------------------------------------------------------------------- ++# Configuration options related to the dot tool ++#--------------------------------------------------------------------------- ++CLASS_DIAGRAMS = YES ++HIDE_UNDOC_RELATIONS = YES ++HAVE_DOT = NO ++CLASS_GRAPH = YES ++COLLABORATION_GRAPH = YES ++UML_LOOK = NO ++TEMPLATE_RELATIONS = NO ++INCLUDE_GRAPH = YES ++INCLUDED_BY_GRAPH = YES ++CALL_GRAPH = NO ++GRAPHICAL_HIERARCHY = YES ++DOT_IMAGE_FORMAT = png ++DOT_PATH = ++DOTFILE_DIRS = ++MAX_DOT_GRAPH_DEPTH = 1000 ++GENERATE_LEGEND = YES ++DOT_CLEANUP = YES ++#--------------------------------------------------------------------------- ++# Configuration::additions related to the search engine ++#--------------------------------------------------------------------------- ++SEARCHENGINE = NO +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dummy_audio.c +@@ -0,0 +1,1574 @@ ++/* ++ * zero.c -- Gadget Zero, for USB development ++ * ++ * Copyright (C) 2003-2004 David Brownell ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++ ++/* ++ * Gadget Zero only needs two bulk endpoints, and is an example of how you ++ * can write a hardware-agnostic gadget driver running inside a USB device. ++ * ++ * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't ++ * affect most of the driver. ++ * ++ * Use it with the Linux host/master side "usbtest" driver to get a basic ++ * functional test of your device-side usb stack, or with "usb-skeleton". ++ * ++ * It supports two similar configurations. One sinks whatever the usb host ++ * writes, and in return sources zeroes. The other loops whatever the host ++ * writes back, so the host can read it. Module options include: ++ * ++ * buflen=N default N=4096, buffer size used ++ * qlen=N default N=32, how many buffers in the loopback queue ++ * loopdefault default false, list loopback config first ++ * ++ * Many drivers will only have one configuration, letting them be much ++ * simpler if they also don't support high speed operation (like this ++ * driver does). ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) ++# include ++#else ++# include ++#endif ++ ++#include ++ ++ ++/*-------------------------------------------------------------------------*/ ++/*-------------------------------------------------------------------------*/ ++ ++ ++static int utf8_to_utf16le(const char *s, u16 *cp, unsigned len) ++{ ++ int count = 0; ++ u8 c; ++ u16 uchar; ++ ++ /* this insists on correct encodings, though not minimal ones. ++ * BUT it currently rejects legit 4-byte UTF-8 code points, ++ * which need surrogate pairs. (Unicode 3.1 can use them.) ++ */ ++ while (len != 0 && (c = (u8) *s++) != 0) { ++ if (unlikely(c & 0x80)) { ++ // 2-byte sequence: ++ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx ++ if ((c & 0xe0) == 0xc0) { ++ uchar = (c & 0x1f) << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ // 3-byte sequence (most CJKV characters): ++ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx ++ } else if ((c & 0xf0) == 0xe0) { ++ uchar = (c & 0x0f) << 12; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ /* no bogus surrogates */ ++ if (0xd800 <= uchar && uchar <= 0xdfff) ++ goto fail; ++ ++ // 4-byte sequence (surrogate pairs, currently rare): ++ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx ++ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx ++ // (uuuuu = wwww + 1) ++ // FIXME accept the surrogate code points (only) ++ ++ } else ++ goto fail; ++ } else ++ uchar = c; ++ put_unaligned (cpu_to_le16 (uchar), cp++); ++ count++; ++ len--; ++ } ++ return count; ++fail: ++ return -1; ++} ++ ++ ++/** ++ * usb_gadget_get_string - fill out a string descriptor ++ * @table: of c strings encoded using UTF-8 ++ * @id: string id, from low byte of wValue in get string descriptor ++ * @buf: at least 256 bytes ++ * ++ * Finds the UTF-8 string matching the ID, and converts it into a ++ * string descriptor in utf16-le. ++ * Returns length of descriptor (always even) or negative errno ++ * ++ * If your driver needs stings in multiple languages, you'll probably ++ * "switch (wIndex) { ... }" in your ep0 string descriptor logic, ++ * using this routine after choosing which set of UTF-8 strings to use. ++ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with ++ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1 ++ * characters (which are also widely used in C strings). ++ */ ++int ++usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf) ++{ ++ struct usb_string *s; ++ int len; ++ ++ /* descriptor 0 has the language id */ ++ if (id == 0) { ++ buf [0] = 4; ++ buf [1] = USB_DT_STRING; ++ buf [2] = (u8) table->language; ++ buf [3] = (u8) (table->language >> 8); ++ return 4; ++ } ++ for (s = table->strings; s && s->s; s++) ++ if (s->id == id) ++ break; ++ ++ /* unrecognized: stall. */ ++ if (!s || !s->s) ++ return -EINVAL; ++ ++ /* string descriptors have length, tag, then UTF16-LE text */ ++ len = min ((size_t) 126, strlen (s->s)); ++ memset (buf + 2, 0, 2 * len); /* zero all the bytes */ ++ len = utf8_to_utf16le(s->s, (u16 *)&buf[2], len); ++ if (len < 0) ++ return -EINVAL; ++ buf [0] = (len + 1) * 2; ++ buf [1] = USB_DT_STRING; ++ return buf [0]; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++/*-------------------------------------------------------------------------*/ ++ ++ ++/** ++ * usb_descriptor_fillbuf - fill buffer with descriptors ++ * @buf: Buffer to be filled ++ * @buflen: Size of buf ++ * @src: Array of descriptor pointers, terminated by null pointer. ++ * ++ * Copies descriptors into the buffer, returning the length or a ++ * negative error code if they can't all be copied. Useful when ++ * assembling descriptors for an associated set of interfaces used ++ * as part of configuring a composite device; or in other cases where ++ * sets of descriptors need to be marshaled. ++ */ ++int ++usb_descriptor_fillbuf(void *buf, unsigned buflen, ++ const struct usb_descriptor_header **src) ++{ ++ u8 *dest = buf; ++ ++ if (!src) ++ return -EINVAL; ++ ++ /* fill buffer from src[] until null descriptor ptr */ ++ for (; 0 != *src; src++) { ++ unsigned len = (*src)->bLength; ++ ++ if (len > buflen) ++ return -EINVAL; ++ memcpy(dest, *src, len); ++ buflen -= len; ++ dest += len; ++ } ++ return dest - (u8 *)buf; ++} ++ ++ ++/** ++ * usb_gadget_config_buf - builts a complete configuration descriptor ++ * @config: Header for the descriptor, including characteristics such ++ * as power requirements and number of interfaces. ++ * @desc: Null-terminated vector of pointers to the descriptors (interface, ++ * endpoint, etc) defining all functions in this device configuration. ++ * @buf: Buffer for the resulting configuration descriptor. ++ * @length: Length of buffer. If this is not big enough to hold the ++ * entire configuration descriptor, an error code will be returned. ++ * ++ * This copies descriptors into the response buffer, building a descriptor ++ * for that configuration. It returns the buffer length or a negative ++ * status code. The config.wTotalLength field is set to match the length ++ * of the result, but other descriptor fields (including power usage and ++ * interface count) must be set by the caller. ++ * ++ * Gadget drivers could use this when constructing a config descriptor ++ * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the ++ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed. ++ */ ++int usb_gadget_config_buf( ++ const struct usb_config_descriptor *config, ++ void *buf, ++ unsigned length, ++ const struct usb_descriptor_header **desc ++) ++{ ++ struct usb_config_descriptor *cp = buf; ++ int len; ++ ++ /* config descriptor first */ ++ if (length < USB_DT_CONFIG_SIZE || !desc) ++ return -EINVAL; ++ *cp = *config; ++ ++ /* then interface/endpoint/class/vendor/... */ ++ len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf, ++ length - USB_DT_CONFIG_SIZE, desc); ++ if (len < 0) ++ return len; ++ len += USB_DT_CONFIG_SIZE; ++ if (len > 0xffff) ++ return -EINVAL; ++ ++ /* patch up the config descriptor */ ++ cp->bLength = USB_DT_CONFIG_SIZE; ++ cp->bDescriptorType = USB_DT_CONFIG; ++ cp->wTotalLength = cpu_to_le16(len); ++ cp->bmAttributes |= USB_CONFIG_ATT_ONE; ++ return len; ++} ++ ++/*-------------------------------------------------------------------------*/ ++/*-------------------------------------------------------------------------*/ ++ ++ ++#define RBUF_LEN (1024*1024) ++static int rbuf_start; ++static int rbuf_len; ++static __u8 rbuf[RBUF_LEN]; ++ ++/*-------------------------------------------------------------------------*/ ++ ++#define DRIVER_VERSION "St Patrick's Day 2004" ++ ++static const char shortname [] = "zero"; ++static const char longname [] = "YAMAHA YST-MS35D USB Speaker "; ++ ++static const char source_sink [] = "source and sink data"; ++static const char loopback [] = "loop input to output"; ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * driver assumes self-powered hardware, and ++ * has no way for users to trigger remote wakeup. ++ * ++ * this version autoconfigures as much as possible, ++ * which is reasonable for most "bulk-only" drivers. ++ */ ++static const char *EP_IN_NAME; /* source */ ++static const char *EP_OUT_NAME; /* sink */ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* big enough to hold our biggest descriptor */ ++#define USB_BUFSIZ 512 ++ ++struct zero_dev { ++ spinlock_t lock; ++ struct usb_gadget *gadget; ++ struct usb_request *req; /* for control responses */ ++ ++ /* when configured, we have one of two configs: ++ * - source data (in to host) and sink it (out from host) ++ * - or loop it back (out from host back in to host) ++ */ ++ u8 config; ++ struct usb_ep *in_ep, *out_ep; ++ ++ /* autoresume timer */ ++ struct timer_list resume; ++}; ++ ++#define xprintk(d,level,fmt,args...) \ ++ dev_printk(level , &(d)->gadget->dev , fmt , ## args) ++ ++#ifdef DEBUG ++#define DBG(dev,fmt,args...) \ ++ xprintk(dev , KERN_DEBUG , fmt , ## args) ++#else ++#define DBG(dev,fmt,args...) \ ++ do { } while (0) ++#endif /* DEBUG */ ++ ++#ifdef VERBOSE ++#define VDBG DBG ++#else ++#define VDBG(dev,fmt,args...) \ ++ do { } while (0) ++#endif /* VERBOSE */ ++ ++#define ERROR(dev,fmt,args...) \ ++ xprintk(dev , KERN_ERR , fmt , ## args) ++#define WARN(dev,fmt,args...) \ ++ xprintk(dev , KERN_WARNING , fmt , ## args) ++#define INFO(dev,fmt,args...) \ ++ xprintk(dev , KERN_INFO , fmt , ## args) ++ ++/*-------------------------------------------------------------------------*/ ++ ++static unsigned buflen = 4096; ++static unsigned qlen = 32; ++static unsigned pattern = 0; ++ ++module_param (buflen, uint, S_IRUGO|S_IWUSR); ++module_param (qlen, uint, S_IRUGO|S_IWUSR); ++module_param (pattern, uint, S_IRUGO|S_IWUSR); ++ ++/* ++ * if it's nonzero, autoresume says how many seconds to wait ++ * before trying to wake up the host after suspend. ++ */ ++static unsigned autoresume = 0; ++module_param (autoresume, uint, 0); ++ ++/* ++ * Normally the "loopback" configuration is second (index 1) so ++ * it's not the default. Here's where to change that order, to ++ * work better with hosts where config changes are problematic. ++ * Or controllers (like superh) that only support one config. ++ */ ++static int loopdefault = 0; ++ ++module_param (loopdefault, bool, S_IRUGO|S_IWUSR); ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Thanks to NetChip Technologies for donating this product ID. ++ * ++ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! ++ * Instead: allocate your own, using normal USB-IF procedures. ++ */ ++#ifndef CONFIG_USB_ZERO_HNPTEST ++#define DRIVER_VENDOR_NUM 0x0525 /* NetChip */ ++#define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */ ++#else ++#define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */ ++#define DRIVER_PRODUCT_NUM 0xbadd ++#endif ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * DESCRIPTORS ... most are static, but strings and (full) ++ * configuration descriptors are built on demand. ++ */ ++ ++/* ++#define STRING_MANUFACTURER 25 ++#define STRING_PRODUCT 42 ++#define STRING_SERIAL 101 ++*/ ++#define STRING_MANUFACTURER 1 ++#define STRING_PRODUCT 2 ++#define STRING_SERIAL 3 ++ ++#define STRING_SOURCE_SINK 250 ++#define STRING_LOOPBACK 251 ++ ++/* ++ * This device advertises two configurations; these numbers work ++ * on a pxa250 as well as more flexible hardware. ++ */ ++#define CONFIG_SOURCE_SINK 3 ++#define CONFIG_LOOPBACK 2 ++ ++/* ++static struct usb_device_descriptor ++device_desc = { ++ .bLength = sizeof device_desc, ++ .bDescriptorType = USB_DT_DEVICE, ++ ++ .bcdUSB = __constant_cpu_to_le16 (0x0200), ++ .bDeviceClass = USB_CLASS_VENDOR_SPEC, ++ ++ .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM), ++ .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM), ++ .iManufacturer = STRING_MANUFACTURER, ++ .iProduct = STRING_PRODUCT, ++ .iSerialNumber = STRING_SERIAL, ++ .bNumConfigurations = 2, ++}; ++*/ ++static struct usb_device_descriptor ++device_desc = { ++ .bLength = sizeof device_desc, ++ .bDescriptorType = USB_DT_DEVICE, ++ .bcdUSB = __constant_cpu_to_le16 (0x0100), ++ .bDeviceClass = USB_CLASS_PER_INTERFACE, ++ .bDeviceSubClass = 0, ++ .bDeviceProtocol = 0, ++ .bMaxPacketSize0 = 64, ++ .bcdDevice = __constant_cpu_to_le16 (0x0100), ++ .idVendor = __constant_cpu_to_le16 (0x0499), ++ .idProduct = __constant_cpu_to_le16 (0x3002), ++ .iManufacturer = STRING_MANUFACTURER, ++ .iProduct = STRING_PRODUCT, ++ .iSerialNumber = STRING_SERIAL, ++ .bNumConfigurations = 1, ++}; ++ ++static struct usb_config_descriptor ++z_config = { ++ .bLength = sizeof z_config, ++ .bDescriptorType = USB_DT_CONFIG, ++ ++ /* compute wTotalLength on the fly */ ++ .bNumInterfaces = 2, ++ .bConfigurationValue = 1, ++ .iConfiguration = 0, ++ .bmAttributes = 0x40, ++ .bMaxPower = 0, /* self-powered */ ++}; ++ ++ ++static struct usb_otg_descriptor ++otg_descriptor = { ++ .bLength = sizeof otg_descriptor, ++ .bDescriptorType = USB_DT_OTG, ++ ++ .bmAttributes = USB_OTG_SRP, ++}; ++ ++/* one interface in each configuration */ ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ ++/* ++ * usb 2.0 devices need to expose both high speed and full speed ++ * descriptors, unless they only run at full speed. ++ * ++ * that means alternate endpoint descriptors (bigger packets) ++ * and a "device qualifier" ... plus more construction options ++ * for the config descriptor. ++ */ ++ ++static struct usb_qualifier_descriptor ++dev_qualifier = { ++ .bLength = sizeof dev_qualifier, ++ .bDescriptorType = USB_DT_DEVICE_QUALIFIER, ++ ++ .bcdUSB = __constant_cpu_to_le16 (0x0200), ++ .bDeviceClass = USB_CLASS_VENDOR_SPEC, ++ ++ .bNumConfigurations = 2, ++}; ++ ++ ++struct usb_cs_as_general_descriptor { ++ __u8 bLength; ++ __u8 bDescriptorType; ++ ++ __u8 bDescriptorSubType; ++ __u8 bTerminalLink; ++ __u8 bDelay; ++ __u16 wFormatTag; ++} __attribute__ ((packed)); ++ ++struct usb_cs_as_format_descriptor { ++ __u8 bLength; ++ __u8 bDescriptorType; ++ ++ __u8 bDescriptorSubType; ++ __u8 bFormatType; ++ __u8 bNrChannels; ++ __u8 bSubframeSize; ++ __u8 bBitResolution; ++ __u8 bSamfreqType; ++ __u8 tLowerSamFreq[3]; ++ __u8 tUpperSamFreq[3]; ++} __attribute__ ((packed)); ++ ++static const struct usb_interface_descriptor ++z_audio_control_if_desc = { ++ .bLength = sizeof z_audio_control_if_desc, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 0, ++ .bAlternateSetting = 0, ++ .bNumEndpoints = 0, ++ .bInterfaceClass = USB_CLASS_AUDIO, ++ .bInterfaceSubClass = 0x1, ++ .bInterfaceProtocol = 0, ++ .iInterface = 0, ++}; ++ ++static const struct usb_interface_descriptor ++z_audio_if_desc = { ++ .bLength = sizeof z_audio_if_desc, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 1, ++ .bAlternateSetting = 0, ++ .bNumEndpoints = 0, ++ .bInterfaceClass = USB_CLASS_AUDIO, ++ .bInterfaceSubClass = 0x2, ++ .bInterfaceProtocol = 0, ++ .iInterface = 0, ++}; ++ ++static const struct usb_interface_descriptor ++z_audio_if_desc2 = { ++ .bLength = sizeof z_audio_if_desc, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 1, ++ .bAlternateSetting = 1, ++ .bNumEndpoints = 1, ++ .bInterfaceClass = USB_CLASS_AUDIO, ++ .bInterfaceSubClass = 0x2, ++ .bInterfaceProtocol = 0, ++ .iInterface = 0, ++}; ++ ++static const struct usb_cs_as_general_descriptor ++z_audio_cs_as_if_desc = { ++ .bLength = 7, ++ .bDescriptorType = 0x24, ++ ++ .bDescriptorSubType = 0x01, ++ .bTerminalLink = 0x01, ++ .bDelay = 0x0, ++ .wFormatTag = __constant_cpu_to_le16 (0x0001) ++}; ++ ++ ++static const struct usb_cs_as_format_descriptor ++z_audio_cs_as_format_desc = { ++ .bLength = 0xe, ++ .bDescriptorType = 0x24, ++ ++ .bDescriptorSubType = 2, ++ .bFormatType = 1, ++ .bNrChannels = 1, ++ .bSubframeSize = 1, ++ .bBitResolution = 8, ++ .bSamfreqType = 0, ++ .tLowerSamFreq = {0x7e, 0x13, 0x00}, ++ .tUpperSamFreq = {0xe2, 0xd6, 0x00}, ++}; ++ ++static const struct usb_endpoint_descriptor ++z_iso_ep = { ++ .bLength = 0x09, ++ .bDescriptorType = 0x05, ++ .bEndpointAddress = 0x04, ++ .bmAttributes = 0x09, ++ .wMaxPacketSize = 0x0038, ++ .bInterval = 0x01, ++ .bRefresh = 0x00, ++ .bSynchAddress = 0x00, ++}; ++ ++static char z_iso_ep2[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++// 9 bytes ++static char z_ac_interface_header_desc[] = ++{ 0x09, 0x24, 0x01, 0x00, 0x01, 0x2b, 0x00, 0x01, 0x01 }; ++ ++// 12 bytes ++static char z_0[] = {0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02, ++ 0x03, 0x00, 0x00, 0x00}; ++// 13 bytes ++static char z_1[] = {0x0d, 0x24, 0x06, 0x02, 0x01, 0x02, 0x15, 0x00, ++ 0x02, 0x00, 0x02, 0x00, 0x00}; ++// 9 bytes ++static char z_2[] = {0x09, 0x24, 0x03, 0x03, 0x01, 0x03, 0x00, 0x02, ++ 0x00}; ++ ++static char za_0[] = {0x09, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_1[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_2[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x01, 0x08, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_3[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_4[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_5[] = {0x09, 0x04, 0x01, 0x03, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_6[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_7[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x02, 0x10, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_8[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_9[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_10[] = {0x09, 0x04, 0x01, 0x04, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_11[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_12[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x00, ++ 0x73, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_13[] = {0x09, 0x05, 0x04, 0x09, 0xe0, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_14[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_15[] = {0x09, 0x04, 0x01, 0x05, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_16[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_17[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x03, 0x14, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_18[] = {0x09, 0x05, 0x04, 0x09, 0xa8, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_19[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_20[] = {0x09, 0x04, 0x01, 0x06, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_21[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_22[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x03, 0x14, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_23[] = {0x09, 0x05, 0x04, 0x09, 0x50, 0x01, 0x01, 0x00, ++ 0x00}; ++ ++static char za_24[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++ ++ ++static const struct usb_descriptor_header *z_function [] = { ++ (struct usb_descriptor_header *) &z_audio_control_if_desc, ++ (struct usb_descriptor_header *) &z_ac_interface_header_desc, ++ (struct usb_descriptor_header *) &z_0, ++ (struct usb_descriptor_header *) &z_1, ++ (struct usb_descriptor_header *) &z_2, ++ (struct usb_descriptor_header *) &z_audio_if_desc, ++ (struct usb_descriptor_header *) &z_audio_if_desc2, ++ (struct usb_descriptor_header *) &z_audio_cs_as_if_desc, ++ (struct usb_descriptor_header *) &z_audio_cs_as_format_desc, ++ (struct usb_descriptor_header *) &z_iso_ep, ++ (struct usb_descriptor_header *) &z_iso_ep2, ++ (struct usb_descriptor_header *) &za_0, ++ (struct usb_descriptor_header *) &za_1, ++ (struct usb_descriptor_header *) &za_2, ++ (struct usb_descriptor_header *) &za_3, ++ (struct usb_descriptor_header *) &za_4, ++ (struct usb_descriptor_header *) &za_5, ++ (struct usb_descriptor_header *) &za_6, ++ (struct usb_descriptor_header *) &za_7, ++ (struct usb_descriptor_header *) &za_8, ++ (struct usb_descriptor_header *) &za_9, ++ (struct usb_descriptor_header *) &za_10, ++ (struct usb_descriptor_header *) &za_11, ++ (struct usb_descriptor_header *) &za_12, ++ (struct usb_descriptor_header *) &za_13, ++ (struct usb_descriptor_header *) &za_14, ++ (struct usb_descriptor_header *) &za_15, ++ (struct usb_descriptor_header *) &za_16, ++ (struct usb_descriptor_header *) &za_17, ++ (struct usb_descriptor_header *) &za_18, ++ (struct usb_descriptor_header *) &za_19, ++ (struct usb_descriptor_header *) &za_20, ++ (struct usb_descriptor_header *) &za_21, ++ (struct usb_descriptor_header *) &za_22, ++ (struct usb_descriptor_header *) &za_23, ++ (struct usb_descriptor_header *) &za_24, ++ NULL, ++}; ++ ++/* maxpacket and other transfer characteristics vary by speed. */ ++#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs)) ++ ++#else ++ ++/* if there's no high speed support, maxpacket doesn't change. */ ++#define ep_desc(g,hs,fs) fs ++ ++#endif /* !CONFIG_USB_GADGET_DUALSPEED */ ++ ++static char manufacturer [40]; ++//static char serial [40]; ++static char serial [] = "Ser 00 em"; ++ ++/* static strings, in UTF-8 */ ++static struct usb_string strings [] = { ++ { STRING_MANUFACTURER, manufacturer, }, ++ { STRING_PRODUCT, longname, }, ++ { STRING_SERIAL, serial, }, ++ { STRING_LOOPBACK, loopback, }, ++ { STRING_SOURCE_SINK, source_sink, }, ++ { } /* end of list */ ++}; ++ ++static struct usb_gadget_strings stringtab = { ++ .language = 0x0409, /* en-us */ ++ .strings = strings, ++}; ++ ++/* ++ * config descriptors are also handcrafted. these must agree with code ++ * that sets configurations, and with code managing interfaces and their ++ * altsettings. other complexity may come from: ++ * ++ * - high speed support, including "other speed config" rules ++ * - multiple configurations ++ * - interfaces with alternate settings ++ * - embedded class or vendor-specific descriptors ++ * ++ * this handles high speed, and has a second config that could as easily ++ * have been an alternate interface setting (on most hardware). ++ * ++ * NOTE: to demonstrate (and test) more USB capabilities, this driver ++ * should include an altsetting to test interrupt transfers, including ++ * high bandwidth modes at high speed. (Maybe work like Intel's test ++ * device?) ++ */ ++static int ++config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index) ++{ ++ int len; ++ const struct usb_descriptor_header **function; ++ ++ function = z_function; ++ len = usb_gadget_config_buf (&z_config, buf, USB_BUFSIZ, function); ++ if (len < 0) ++ return len; ++ ((struct usb_config_descriptor *) buf)->bDescriptorType = type; ++ return len; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static struct usb_request * ++alloc_ep_req (struct usb_ep *ep, unsigned length) ++{ ++ struct usb_request *req; ++ ++ req = usb_ep_alloc_request (ep, GFP_ATOMIC); ++ if (req) { ++ req->length = length; ++ req->buf = usb_ep_alloc_buffer (ep, length, ++ &req->dma, GFP_ATOMIC); ++ if (!req->buf) { ++ usb_ep_free_request (ep, req); ++ req = NULL; ++ } ++ } ++ return req; ++} ++ ++static void free_ep_req (struct usb_ep *ep, struct usb_request *req) ++{ ++ if (req->buf) ++ usb_ep_free_buffer (ep, req->buf, req->dma, req->length); ++ usb_ep_free_request (ep, req); ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* optionally require specific source/sink data patterns */ ++ ++static int ++check_read_data ( ++ struct zero_dev *dev, ++ struct usb_ep *ep, ++ struct usb_request *req ++) ++{ ++ unsigned i; ++ u8 *buf = req->buf; ++ ++ for (i = 0; i < req->actual; i++, buf++) { ++ switch (pattern) { ++ /* all-zeroes has no synchronization issues */ ++ case 0: ++ if (*buf == 0) ++ continue; ++ break; ++ /* mod63 stays in sync with short-terminated transfers, ++ * or otherwise when host and gadget agree on how large ++ * each usb transfer request should be. resync is done ++ * with set_interface or set_config. ++ */ ++ case 1: ++ if (*buf == (u8)(i % 63)) ++ continue; ++ break; ++ } ++ ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf); ++ usb_ep_set_halt (ep); ++ return -EINVAL; ++ } ++ return 0; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void zero_reset_config (struct zero_dev *dev) ++{ ++ if (dev->config == 0) ++ return; ++ ++ DBG (dev, "reset config\n"); ++ ++ /* just disable endpoints, forcing completion of pending i/o. ++ * all our completion handlers free their requests in this case. ++ */ ++ if (dev->in_ep) { ++ usb_ep_disable (dev->in_ep); ++ dev->in_ep = NULL; ++ } ++ if (dev->out_ep) { ++ usb_ep_disable (dev->out_ep); ++ dev->out_ep = NULL; ++ } ++ dev->config = 0; ++ del_timer (&dev->resume); ++} ++ ++#define _write(f, buf, sz) (f->f_op->write(f, buf, sz, &f->f_pos)) ++ ++static void ++zero_isoc_complete (struct usb_ep *ep, struct usb_request *req) ++{ ++ struct zero_dev *dev = ep->driver_data; ++ int status = req->status; ++ int i, j; ++ ++ switch (status) { ++ ++ case 0: /* normal completion? */ ++ //printk ("\nzero ---------------> isoc normal completion %d bytes\n", req->actual); ++ for (i=0, j=rbuf_start; iactual; i++) { ++ //printk ("%02x ", ((__u8*)req->buf)[i]); ++ rbuf[j] = ((__u8*)req->buf)[i]; ++ j++; ++ if (j >= RBUF_LEN) j=0; ++ } ++ rbuf_start = j; ++ //printk ("\n\n"); ++ ++ if (rbuf_len < RBUF_LEN) { ++ rbuf_len += req->actual; ++ if (rbuf_len > RBUF_LEN) { ++ rbuf_len = RBUF_LEN; ++ } ++ } ++ ++ break; ++ ++ /* this endpoint is normally active while we're configured */ ++ case -ECONNABORTED: /* hardware forced ep reset */ ++ case -ECONNRESET: /* request dequeued */ ++ case -ESHUTDOWN: /* disconnect from host */ ++ VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status, ++ req->actual, req->length); ++ if (ep == dev->out_ep) ++ check_read_data (dev, ep, req); ++ free_ep_req (ep, req); ++ return; ++ ++ case -EOVERFLOW: /* buffer overrun on read means that ++ * we didn't provide a big enough ++ * buffer. ++ */ ++ default: ++#if 1 ++ DBG (dev, "%s complete --> %d, %d/%d\n", ep->name, ++ status, req->actual, req->length); ++#endif ++ case -EREMOTEIO: /* short read */ ++ break; ++ } ++ ++ status = usb_ep_queue (ep, req, GFP_ATOMIC); ++ if (status) { ++ ERROR (dev, "kill %s: resubmit %d bytes --> %d\n", ++ ep->name, req->length, status); ++ usb_ep_set_halt (ep); ++ /* FIXME recover later ... somehow */ ++ } ++} ++ ++static struct usb_request * ++zero_start_isoc_ep (struct usb_ep *ep, int gfp_flags) ++{ ++ struct usb_request *req; ++ int status; ++ ++ req = alloc_ep_req (ep, 512); ++ if (!req) ++ return NULL; ++ ++ req->complete = zero_isoc_complete; ++ ++ status = usb_ep_queue (ep, req, gfp_flags); ++ if (status) { ++ struct zero_dev *dev = ep->driver_data; ++ ++ ERROR (dev, "start %s --> %d\n", ep->name, status); ++ free_ep_req (ep, req); ++ req = NULL; ++ } ++ ++ return req; ++} ++ ++/* change our operational config. this code must agree with the code ++ * that returns config descriptors, and altsetting code. ++ * ++ * it's also responsible for power management interactions. some ++ * configurations might not work with our current power sources. ++ * ++ * note that some device controller hardware will constrain what this ++ * code can do, perhaps by disallowing more than one configuration or ++ * by limiting configuration choices (like the pxa2xx). ++ */ ++static int ++zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags) ++{ ++ int result = 0; ++ struct usb_gadget *gadget = dev->gadget; ++ const struct usb_endpoint_descriptor *d; ++ struct usb_ep *ep; ++ ++ if (number == dev->config) ++ return 0; ++ ++ zero_reset_config (dev); ++ ++ gadget_for_each_ep (ep, gadget) { ++ ++ if (strcmp (ep->name, "ep4") == 0) { ++ ++ d = (struct usb_endpoint_descripter *)&za_23; // isoc ep desc for audio i/f alt setting 6 ++ result = usb_ep_enable (ep, d); ++ ++ if (result == 0) { ++ ep->driver_data = dev; ++ dev->in_ep = ep; ++ ++ if (zero_start_isoc_ep (ep, gfp_flags) != 0) { ++ ++ dev->in_ep = ep; ++ continue; ++ } ++ ++ usb_ep_disable (ep); ++ result = -EIO; ++ } ++ } ++ ++ } ++ ++ dev->config = number; ++ return result; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req) ++{ ++ if (req->status || req->actual != req->length) ++ DBG ((struct zero_dev *) ep->driver_data, ++ "setup complete --> %d, %d/%d\n", ++ req->status, req->actual, req->length); ++} ++ ++/* ++ * The setup() callback implements all the ep0 functionality that's ++ * not handled lower down, in hardware or the hardware driver (like ++ * device and endpoint feature flags, and their status). It's all ++ * housekeeping for the gadget function we're implementing. Most of ++ * the work is in config-specific setup. ++ */ ++static int ++zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ struct usb_request *req = dev->req; ++ int value = -EOPNOTSUPP; ++ ++ /* usually this stores reply data in the pre-allocated ep0 buffer, ++ * but config change events will reconfigure hardware. ++ */ ++ req->zero = 0; ++ switch (ctrl->bRequest) { ++ ++ case USB_REQ_GET_DESCRIPTOR: ++ ++ switch (ctrl->wValue >> 8) { ++ ++ case USB_DT_DEVICE: ++ value = min (ctrl->wLength, (u16) sizeof device_desc); ++ memcpy (req->buf, &device_desc, value); ++ break; ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ case USB_DT_DEVICE_QUALIFIER: ++ if (!gadget->is_dualspeed) ++ break; ++ value = min (ctrl->wLength, (u16) sizeof dev_qualifier); ++ memcpy (req->buf, &dev_qualifier, value); ++ break; ++ ++ case USB_DT_OTHER_SPEED_CONFIG: ++ if (!gadget->is_dualspeed) ++ break; ++ // FALLTHROUGH ++#endif /* CONFIG_USB_GADGET_DUALSPEED */ ++ case USB_DT_CONFIG: ++ value = config_buf (gadget, req->buf, ++ ctrl->wValue >> 8, ++ ctrl->wValue & 0xff); ++ if (value >= 0) ++ value = min (ctrl->wLength, (u16) value); ++ break; ++ ++ case USB_DT_STRING: ++ /* wIndex == language code. ++ * this driver only handles one language, you can ++ * add string tables for other languages, using ++ * any UTF-8 characters ++ */ ++ value = usb_gadget_get_string (&stringtab, ++ ctrl->wValue & 0xff, req->buf); ++ if (value >= 0) { ++ value = min (ctrl->wLength, (u16) value); ++ } ++ break; ++ } ++ break; ++ ++ /* currently two configs, two speeds */ ++ case USB_REQ_SET_CONFIGURATION: ++ if (ctrl->bRequestType != 0) ++ goto unknown; ++ ++ spin_lock (&dev->lock); ++ value = zero_set_config (dev, ctrl->wValue, GFP_ATOMIC); ++ spin_unlock (&dev->lock); ++ break; ++ case USB_REQ_GET_CONFIGURATION: ++ if (ctrl->bRequestType != USB_DIR_IN) ++ goto unknown; ++ *(u8 *)req->buf = dev->config; ++ value = min (ctrl->wLength, (u16) 1); ++ break; ++ ++ /* until we add altsetting support, or other interfaces, ++ * only 0/0 are possible. pxa2xx only supports 0/0 (poorly) ++ * and already killed pending endpoint I/O. ++ */ ++ case USB_REQ_SET_INTERFACE: ++ ++ if (ctrl->bRequestType != USB_RECIP_INTERFACE) ++ goto unknown; ++ spin_lock (&dev->lock); ++ if (dev->config) { ++ u8 config = dev->config; ++ ++ /* resets interface configuration, forgets about ++ * previous transaction state (queued bufs, etc) ++ * and re-inits endpoint state (toggle etc) ++ * no response queued, just zero status == success. ++ * if we had more than one interface we couldn't ++ * use this "reset the config" shortcut. ++ */ ++ zero_reset_config (dev); ++ zero_set_config (dev, config, GFP_ATOMIC); ++ value = 0; ++ } ++ spin_unlock (&dev->lock); ++ break; ++ case USB_REQ_GET_INTERFACE: ++ if ((ctrl->bRequestType == 0x21) && (ctrl->wIndex == 0x02)) { ++ value = ctrl->wLength; ++ break; ++ } ++ else { ++ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) ++ goto unknown; ++ if (!dev->config) ++ break; ++ if (ctrl->wIndex != 0) { ++ value = -EDOM; ++ break; ++ } ++ *(u8 *)req->buf = 0; ++ value = min (ctrl->wLength, (u16) 1); ++ } ++ break; ++ ++ /* ++ * These are the same vendor-specific requests supported by ++ * Intel's USB 2.0 compliance test devices. We exceed that ++ * device spec by allowing multiple-packet requests. ++ */ ++ case 0x5b: /* control WRITE test -- fill the buffer */ ++ if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR)) ++ goto unknown; ++ if (ctrl->wValue || ctrl->wIndex) ++ break; ++ /* just read that many bytes into the buffer */ ++ if (ctrl->wLength > USB_BUFSIZ) ++ break; ++ value = ctrl->wLength; ++ break; ++ case 0x5c: /* control READ test -- return the buffer */ ++ if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR)) ++ goto unknown; ++ if (ctrl->wValue || ctrl->wIndex) ++ break; ++ /* expect those bytes are still in the buffer; send back */ ++ if (ctrl->wLength > USB_BUFSIZ ++ || ctrl->wLength != req->length) ++ break; ++ value = ctrl->wLength; ++ break; ++ ++ case 0x01: // SET_CUR ++ case 0x02: ++ case 0x03: ++ case 0x04: ++ case 0x05: ++ value = ctrl->wLength; ++ break; ++ case 0x81: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0xe3; ++ break; ++ case 0x0300: ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x00; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x81; ++ //((u8*)req->buf)[1] = 0x81; ++ value = ctrl->wLength; ++ break; ++ case 0x82: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0xc3; ++ break; ++ case 0x0300: ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x00; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x82; ++ //((u8*)req->buf)[1] = 0x82; ++ value = ctrl->wLength; ++ break; ++ case 0x83: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0x00; ++ break; ++ case 0x0300: ++ ((u8*)req->buf)[0] = 0x60; ++ break; ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x18; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x83; ++ //((u8*)req->buf)[1] = 0x83; ++ value = ctrl->wLength; ++ break; ++ case 0x84: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0x01; ++ break; ++ case 0x0300: ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x08; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x84; ++ //((u8*)req->buf)[1] = 0x84; ++ value = ctrl->wLength; ++ break; ++ case 0x85: ++ ((u8*)req->buf)[0] = 0x85; ++ ((u8*)req->buf)[1] = 0x85; ++ value = ctrl->wLength; ++ break; ++ ++ ++ default: ++unknown: ++ printk("unknown control req%02x.%02x v%04x i%04x l%d\n", ++ ctrl->bRequestType, ctrl->bRequest, ++ ctrl->wValue, ctrl->wIndex, ctrl->wLength); ++ } ++ ++ /* respond with data transfer before status phase? */ ++ if (value >= 0) { ++ req->length = value; ++ req->zero = value < ctrl->wLength ++ && (value % gadget->ep0->maxpacket) == 0; ++ value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); ++ if (value < 0) { ++ DBG (dev, "ep_queue < 0 --> %d\n", value); ++ req->status = 0; ++ zero_setup_complete (gadget->ep0, req); ++ } ++ } ++ ++ /* device either stalls (value < 0) or reports success */ ++ return value; ++} ++ ++static void ++zero_disconnect (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ unsigned long flags; ++ ++ spin_lock_irqsave (&dev->lock, flags); ++ zero_reset_config (dev); ++ ++ /* a more significant application might have some non-usb ++ * activities to quiesce here, saving resources like power ++ * or pushing the notification up a network stack. ++ */ ++ spin_unlock_irqrestore (&dev->lock, flags); ++ ++ /* next we may get setup() calls to enumerate new connections; ++ * or an unbind() during shutdown (including removing module). ++ */ ++} ++ ++static void ++zero_autoresume (unsigned long _dev) ++{ ++ struct zero_dev *dev = (struct zero_dev *) _dev; ++ int status; ++ ++ /* normally the host would be woken up for something ++ * more significant than just a timer firing... ++ */ ++ if (dev->gadget->speed != USB_SPEED_UNKNOWN) { ++ status = usb_gadget_wakeup (dev->gadget); ++ DBG (dev, "wakeup --> %d\n", status); ++ } ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void ++zero_unbind (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ ++ DBG (dev, "unbind\n"); ++ ++ /* we've already been disconnected ... no i/o is active */ ++ if (dev->req) ++ free_ep_req (gadget->ep0, dev->req); ++ del_timer_sync (&dev->resume); ++ kfree (dev); ++ set_gadget_data (gadget, NULL); ++} ++ ++static int ++zero_bind (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev; ++ //struct usb_ep *ep; ++ ++ printk("binding\n"); ++ /* ++ * DRIVER POLICY CHOICE: you may want to do this differently. ++ * One thing to avoid is reusing a bcdDevice revision code ++ * with different host-visible configurations or behavior ++ * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc ++ */ ++ //device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201); ++ ++ ++ /* ok, we made sense of the hardware ... */ ++ dev = kzalloc (sizeof *dev, SLAB_KERNEL); ++ if (!dev) ++ return -ENOMEM; ++ spin_lock_init (&dev->lock); ++ dev->gadget = gadget; ++ set_gadget_data (gadget, dev); ++ ++ /* preallocate control response and buffer */ ++ dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL); ++ if (!dev->req) ++ goto enomem; ++ dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ, ++ &dev->req->dma, GFP_KERNEL); ++ if (!dev->req->buf) ++ goto enomem; ++ ++ dev->req->complete = zero_setup_complete; ++ ++ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; ++ ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ /* assume ep0 uses the same value for both speeds ... */ ++ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; ++ ++ /* and that all endpoints are dual-speed */ ++ //hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; ++ //hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; ++#endif ++ ++ usb_gadget_set_selfpowered (gadget); ++ ++ init_timer (&dev->resume); ++ dev->resume.function = zero_autoresume; ++ dev->resume.data = (unsigned long) dev; ++ ++ gadget->ep0->driver_data = dev; ++ ++ INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname); ++ INFO (dev, "using %s, OUT %s IN %s\n", gadget->name, ++ EP_OUT_NAME, EP_IN_NAME); ++ ++ snprintf (manufacturer, sizeof manufacturer, ++ UTS_SYSNAME " " UTS_RELEASE " with %s", ++ gadget->name); ++ ++ return 0; ++ ++enomem: ++ zero_unbind (gadget); ++ return -ENOMEM; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void ++zero_suspend (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ ++ if (gadget->speed == USB_SPEED_UNKNOWN) ++ return; ++ ++ if (autoresume) { ++ mod_timer (&dev->resume, jiffies + (HZ * autoresume)); ++ DBG (dev, "suspend, wakeup in %d seconds\n", autoresume); ++ } else ++ DBG (dev, "suspend\n"); ++} ++ ++static void ++zero_resume (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ ++ DBG (dev, "resume\n"); ++ del_timer (&dev->resume); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static struct usb_gadget_driver zero_driver = { ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ .speed = USB_SPEED_HIGH, ++#else ++ .speed = USB_SPEED_FULL, ++#endif ++ .function = (char *) longname, ++ .bind = zero_bind, ++ .unbind = zero_unbind, ++ ++ .setup = zero_setup, ++ .disconnect = zero_disconnect, ++ ++ .suspend = zero_suspend, ++ .resume = zero_resume, ++ ++ .driver = { ++ .name = (char *) shortname, ++ // .shutdown = ... ++ // .suspend = ... ++ // .resume = ... ++ }, ++}; ++ ++MODULE_AUTHOR ("David Brownell"); ++MODULE_LICENSE ("Dual BSD/GPL"); ++ ++static struct proc_dir_entry *pdir, *pfile; ++ ++static int isoc_read_data (char *page, char **start, ++ off_t off, int count, ++ int *eof, void *data) ++{ ++ int i; ++ static int c = 0; ++ static int done = 0; ++ static int s = 0; ++ ++/* ++ printk ("\ncount: %d\n", count); ++ printk ("rbuf_start: %d\n", rbuf_start); ++ printk ("rbuf_len: %d\n", rbuf_len); ++ printk ("off: %d\n", off); ++ printk ("start: %p\n\n", *start); ++*/ ++ if (done) { ++ c = 0; ++ done = 0; ++ *eof = 1; ++ return 0; ++ } ++ ++ if (c == 0) { ++ if (rbuf_len == RBUF_LEN) ++ s = rbuf_start; ++ else s = 0; ++ } ++ ++ for (i=0; i= rbuf_len) { ++ *eof = 1; ++ done = 1; ++ } ++ ++ ++ return i; ++} ++ ++static int __init init (void) ++{ ++ ++ int retval = 0; ++ ++ pdir = proc_mkdir("isoc_test", NULL); ++ if(pdir == NULL) { ++ retval = -ENOMEM; ++ printk("Error creating dir\n"); ++ goto done; ++ } ++ pdir->owner = THIS_MODULE; ++ ++ pfile = create_proc_read_entry("isoc_data", ++ 0444, pdir, ++ isoc_read_data, ++ NULL); ++ if (pfile == NULL) { ++ retval = -ENOMEM; ++ printk("Error creating file\n"); ++ goto no_file; ++ } ++ pfile->owner = THIS_MODULE; ++ ++ return usb_gadget_register_driver (&zero_driver); ++ ++ no_file: ++ remove_proc_entry("isoc_data", NULL); ++ done: ++ return retval; ++} ++module_init (init); ++ ++static void __exit cleanup (void) ++{ ++ ++ usb_gadget_unregister_driver (&zero_driver); ++ ++ remove_proc_entry("isoc_data", pdir); ++ remove_proc_entry("isoc_test", NULL); ++} ++module_exit (cleanup); +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_cfi_common.h +@@ -0,0 +1,142 @@ ++/* ========================================================================== ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_CFI_COMMON_H__) ++#define __DWC_CFI_COMMON_H__ ++ ++//#include ++ ++/** ++ * @file ++ * ++ * This file contains the CFI specific common constants, interfaces ++ * (functions and macros) and structures for Linux. No PCD specific ++ * data structure or definition is to be included in this file. ++ * ++ */ ++ ++/** This is a request for all Core Features */ ++#define VEN_CORE_GET_FEATURES 0xB1 ++ ++/** This is a request to get the value of a specific Core Feature */ ++#define VEN_CORE_GET_FEATURE 0xB2 ++ ++/** This command allows the host to set the value of a specific Core Feature */ ++#define VEN_CORE_SET_FEATURE 0xB3 ++ ++/** This command allows the host to set the default values of ++ * either all or any specific Core Feature ++ */ ++#define VEN_CORE_RESET_FEATURES 0xB4 ++ ++/** This command forces the PCD to write the deferred values of a Core Features */ ++#define VEN_CORE_ACTIVATE_FEATURES 0xB5 ++ ++/** This request reads a DWORD value from a register at the specified offset */ ++#define VEN_CORE_READ_REGISTER 0xB6 ++ ++/** This request writes a DWORD value into a register at the specified offset */ ++#define VEN_CORE_WRITE_REGISTER 0xB7 ++ ++/** This structure is the header of the Core Features dataset returned to ++ * the Host ++ */ ++struct cfi_all_features_header { ++/** The features header structure length is */ ++#define CFI_ALL_FEATURES_HDR_LEN 8 ++ /** ++ * The total length of the features dataset returned to the Host ++ */ ++ uint16_t wTotalLen; ++ ++ /** ++ * CFI version number inBinary-Coded Decimal (i.e., 1.00 is 100H). ++ * This field identifies the version of the CFI Specification with which ++ * the device is compliant. ++ */ ++ uint16_t wVersion; ++ ++ /** The ID of the Core */ ++ uint16_t wCoreID; ++#define CFI_CORE_ID_UDC 1 ++#define CFI_CORE_ID_OTG 2 ++#define CFI_CORE_ID_WUDEV 3 ++ ++ /** Number of features returned by VEN_CORE_GET_FEATURES request */ ++ uint16_t wNumFeatures; ++} UPACKED; ++ ++typedef struct cfi_all_features_header cfi_all_features_header_t; ++ ++/** This structure is a header of the Core Feature descriptor dataset returned to ++ * the Host after the VEN_CORE_GET_FEATURES request ++ */ ++struct cfi_feature_desc_header { ++#define CFI_FEATURE_DESC_HDR_LEN 8 ++ ++ /** The feature ID */ ++ uint16_t wFeatureID; ++ ++ /** Length of this feature descriptor in bytes - including the ++ * length of the feature name string ++ */ ++ uint16_t wLength; ++ ++ /** The data length of this feature in bytes */ ++ uint16_t wDataLength; ++ ++ /** ++ * Attributes of this features ++ * D0: Access rights ++ * 0 - Read/Write ++ * 1 - Read only ++ */ ++ uint8_t bmAttributes; ++#define CFI_FEATURE_ATTR_RO 1 ++#define CFI_FEATURE_ATTR_RW 0 ++ ++ /** Length of the feature name in bytes */ ++ uint8_t bNameLen; ++ ++ /** The feature name buffer */ ++ //uint8_t *name; ++} UPACKED; ++ ++typedef struct cfi_feature_desc_header cfi_feature_desc_header_t; ++ ++/** ++ * This structure describes a NULL terminated string referenced by its id field. ++ * It is very similar to usb_string structure but has the id field type set to 16-bit. ++ */ ++struct cfi_string { ++ uint16_t id; ++ const uint8_t *s; ++}; ++typedef struct cfi_string cfi_string_t; ++ ++#endif +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_adp.c +@@ -0,0 +1,854 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.c $ ++ * $Revision: #12 $ ++ * $Date: 2011/10/26 $ ++ * $Change: 1873028 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#include "dwc_os.h" ++#include "dwc_otg_regs.h" ++#include "dwc_otg_cil.h" ++#include "dwc_otg_adp.h" ++ ++/** @file ++ * ++ * This file contains the most of the Attach Detect Protocol implementation for ++ * the driver to support OTG Rev2.0. ++ * ++ */ ++ ++void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value) ++{ ++ adpctl_data_t adpctl; ++ ++ adpctl.d32 = value; ++ adpctl.b.ar = 0x2; ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32); ++ ++ while (adpctl.b.ar) { ++ adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl); ++ } ++ ++} ++ ++/** ++ * Function is called to read ADP registers ++ */ ++uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if) ++{ ++ adpctl_data_t adpctl; ++ ++ adpctl.d32 = 0; ++ adpctl.b.ar = 0x1; ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32); ++ ++ while (adpctl.b.ar) { ++ adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl); ++ } ++ ++ return adpctl.d32; ++} ++ ++/** ++ * Function is called to read ADPCTL register and filter Write-clear bits ++ */ ++uint32_t dwc_otg_adp_read_reg_filter(dwc_otg_core_if_t * core_if) ++{ ++ adpctl_data_t adpctl; ++ ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ adpctl.b.adp_tmout_int = 0; ++ adpctl.b.adp_prb_int = 0; ++ adpctl.b.adp_tmout_int = 0; ++ ++ return adpctl.d32; ++} ++ ++/** ++ * Function is called to write ADP registers ++ */ ++void dwc_otg_adp_modify_reg(dwc_otg_core_if_t * core_if, uint32_t clr, ++ uint32_t set) ++{ ++ dwc_otg_adp_write_reg(core_if, ++ (dwc_otg_adp_read_reg(core_if) & (~clr)) | set); ++} ++ ++static void adp_sense_timeout(void *ptr) ++{ ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; ++ core_if->adp.sense_timer_started = 0; ++ DWC_PRINTF("ADP SENSE TIMEOUT\n"); ++ if (core_if->adp_enable) { ++ dwc_otg_adp_sense_stop(core_if); ++ dwc_otg_adp_probe_start(core_if); ++ } ++} ++ ++/** ++ * This function is called when the ADP vbus timer expires. Timeout is 1.1s. ++ */ ++static void adp_vbuson_timeout(void *ptr) ++{ ++ gpwrdn_data_t gpwrdn; ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ DWC_PRINTF("%s: 1.1 seconds expire after turning on VBUS\n",__FUNCTION__); ++ if (core_if) { ++ core_if->adp.vbuson_timer_started = 0; ++ /* Turn off vbus */ ++ hprt0.b.prtpwr = 1; ++ DWC_MODIFY_REG32(core_if->host_if->hprt0, hprt0.d32, 0); ++ gpwrdn.d32 = 0; ++ ++ /* Power off the core */ ++ if (core_if->power_down == 2) { ++ /* Enable Wakeup Logic */ ++// gpwrdn.b.wkupactiv = 1; ++ gpwrdn.b.pmuactv = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, ++ gpwrdn.d32); ++ ++ /* Suspend the Phy Clock */ ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ ++ /* Switch on VDD */ ++// gpwrdn.b.wkupactiv = 1; ++ gpwrdn.b.pmuactv = 1; ++ gpwrdn.b.pwrdnrstn = 1; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, ++ gpwrdn.d32); ++ } else { ++ /* Enable Power Down Logic */ ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ } ++ ++ /* Power off the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, ++ gpwrdn.d32, 0); ++ } ++ ++ /* Unmask SRP detected interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.srp_det_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ ++ dwc_otg_adp_probe_start(core_if); ++ dwc_otg_dump_global_registers(core_if); ++ dwc_otg_dump_host_registers(core_if); ++ } ++ ++} ++ ++/** ++ * Start the ADP Initial Probe timer to detect if Port Connected interrupt is ++ * not asserted within 1.1 seconds. ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++void dwc_otg_adp_vbuson_timer_start(dwc_otg_core_if_t * core_if) ++{ ++ core_if->adp.vbuson_timer_started = 1; ++ if (core_if->adp.vbuson_timer) ++ { ++ DWC_PRINTF("SCHEDULING VBUSON TIMER\n"); ++ /* 1.1 secs + 60ms necessary for cil_hcd_start*/ ++ DWC_TIMER_SCHEDULE(core_if->adp.vbuson_timer, 1160); ++ } else { ++ DWC_WARN("VBUSON_TIMER = %p\n",core_if->adp.vbuson_timer); ++ } ++} ++ ++#if 0 ++/** ++ * Masks all DWC OTG core interrupts ++ * ++ */ ++static void mask_all_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ gahbcfg_data_t ahbcfg = {.d32 = 0 }; ++ ++ /* Mask Host Interrupts */ ++ ++ /* Clear and disable HCINTs */ ++ for (i = 0; i < core_if->core_params->host_channels; i++) { ++ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk, 0); ++ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcint, 0xFFFFFFFF); ++ ++ } ++ ++ /* Clear and disable HAINT */ ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk, 0x0000); ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haint, 0xFFFFFFFF); ++ ++ /* Mask Device Interrupts */ ++ if (!core_if->multiproc_int_enable) { ++ /* Clear and disable IN Endpoint interrupts */ ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, 0); ++ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]-> ++ diepint, 0xFFFFFFFF); ++ } ++ ++ /* Clear and disable OUT Endpoint interrupts */ ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, 0); ++ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]-> ++ doepint, 0xFFFFFFFF); ++ } ++ ++ /* Clear and disable DAINT */ ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daint, ++ 0xFFFFFFFF); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, 0); ++ } else { ++ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> ++ diepeachintmsk[i], 0); ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]-> ++ diepint, 0xFFFFFFFF); ++ } ++ ++ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[i], 0); ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]-> ++ doepint, 0xFFFFFFFF); ++ } ++ ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachintmsk, ++ 0); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachint, ++ 0xFFFFFFFF); ++ ++ } ++ ++ /* Disable interrupts */ ++ ahbcfg.b.glblintrmsk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0); ++ ++ /* Disable all interrupts. */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0); ++ ++ /* Clear any pending interrupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Clear any pending OTG Interrupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, 0xFFFFFFFF); ++} ++ ++/** ++ * Unmask Port Connection Detected interrupt ++ * ++ */ ++static void unmask_conn_det_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintmsk_data_t gintmsk = {.d32 = 0,.b.portintr = 1 }; ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32); ++} ++#endif ++ ++/** ++ * Starts the ADP Probing ++ * ++ * @param core_if the pointer to core_if structure. ++ */ ++uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if) ++{ ++ ++ adpctl_data_t adpctl = {.d32 = 0}; ++ gpwrdn_data_t gpwrdn; ++#if 0 ++ adpctl_data_t adpctl_int = {.d32 = 0, .b.adp_prb_int = 1, ++ .b.adp_sns_int = 1, b.adp_tmout_int}; ++#endif ++ dwc_otg_disable_global_interrupts(core_if); ++ DWC_PRINTF("ADP Probe Start\n"); ++ core_if->adp.probe_enabled = 1; ++ ++ adpctl.b.adpres = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ while (adpctl.b.adpres) { ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ } ++ ++ adpctl.d32 = 0; ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ ++ /* In Host mode unmask SRP detected interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.sts_chngint_msk = 1; ++ if (!gpwrdn.b.idsts) { ++ gpwrdn.b.srp_det_msk = 1; ++ } ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ ++ adpctl.b.adp_tmout_int_msk = 1; ++ adpctl.b.adp_prb_int_msk = 1; ++ adpctl.b.prb_dschg = 1; ++ adpctl.b.prb_delta = 1; ++ adpctl.b.prb_per = 1; ++ adpctl.b.adpen = 1; ++ adpctl.b.enaprb = 1; ++ ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ DWC_PRINTF("ADP Probe Finish\n"); ++ return 0; ++} ++ ++/** ++ * Starts the ADP Sense timer to detect if ADP Sense interrupt is not asserted ++ * within 3 seconds. ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++void dwc_otg_adp_sense_timer_start(dwc_otg_core_if_t * core_if) ++{ ++ core_if->adp.sense_timer_started = 1; ++ DWC_TIMER_SCHEDULE(core_if->adp.sense_timer, 3000 /* 3 secs */ ); ++} ++ ++/** ++ * Starts the ADP Sense ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if) ++{ ++ adpctl_data_t adpctl; ++ ++ DWC_PRINTF("ADP Sense Start\n"); ++ ++ /* Unmask ADP sense interrupt and mask all other from the core */ ++ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if); ++ adpctl.b.adp_sns_int_msk = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ dwc_otg_disable_global_interrupts(core_if); // vahrama ++ ++ /* Set ADP reset bit*/ ++ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if); ++ adpctl.b.adpres = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ while (adpctl.b.adpres) { ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ } ++ ++ adpctl.b.adpres = 0; ++ adpctl.b.adpen = 1; ++ adpctl.b.enasns = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ dwc_otg_adp_sense_timer_start(core_if); ++ ++ return 0; ++} ++ ++/** ++ * Stops the ADP Probing ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if) ++{ ++ ++ adpctl_data_t adpctl; ++ DWC_PRINTF("Stop ADP probe\n"); ++ core_if->adp.probe_enabled = 0; ++ core_if->adp.probe_counter = 0; ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ ++ adpctl.b.adpen = 0; ++ adpctl.b.adp_prb_int = 1; ++ adpctl.b.adp_tmout_int = 1; ++ adpctl.b.adp_sns_int = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ return 0; ++} ++ ++/** ++ * Stops the ADP Sensing ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if) ++{ ++ adpctl_data_t adpctl; ++ ++ core_if->adp.sense_enabled = 0; ++ ++ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if); ++ adpctl.b.enasns = 0; ++ adpctl.b.adp_sns_int = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ return 0; ++} ++ ++/** ++ * Called to turn on the VBUS after initial ADP probe in host mode. ++ * If port power was already enabled in cil_hcd_start function then ++ * only schedule a timer. ++ * ++ * @param core_if the pointer to core_if structure. ++ */ ++void dwc_otg_adp_turnon_vbus(dwc_otg_core_if_t * core_if) ++{ ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ DWC_PRINTF("Turn on VBUS for 1.1s, port power is %d\n", hprt0.b.prtpwr); ++ ++ if (hprt0.b.prtpwr == 0) { ++ hprt0.b.prtpwr = 1; ++ //DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ } ++ ++ dwc_otg_adp_vbuson_timer_start(core_if); ++} ++ ++/** ++ * Called right after driver is loaded ++ * to perform initial actions for ADP ++ * ++ * @param core_if the pointer to core_if structure. ++ * @param is_host - flag for current mode of operation either from GINTSTS or GPWRDN ++ */ ++void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host) ++{ ++ gpwrdn_data_t gpwrdn; ++ ++ DWC_PRINTF("ADP Initial Start\n"); ++ core_if->adp.adp_started = 1; ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ dwc_otg_disable_global_interrupts(core_if); ++ if (is_host) { ++ DWC_PRINTF("HOST MODE\n"); ++ /* Enable Power Down Logic Interrupt*/ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ /* Initialize first ADP probe to obtain Ramp Time value */ ++ core_if->adp.initial_probe = 1; ++ dwc_otg_adp_probe_start(core_if); ++ } else { ++ gotgctl_data_t gotgctl; ++ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ DWC_PRINTF("DEVICE MODE\n"); ++ if (gotgctl.b.bsesvld == 0) { ++ /* Enable Power Down Logic Interrupt*/ ++ gpwrdn.d32 = 0; ++ DWC_PRINTF("VBUS is not valid - start ADP probe\n"); ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ core_if->adp.initial_probe = 1; ++ dwc_otg_adp_probe_start(core_if); ++ } else { ++ DWC_PRINTF("VBUS is valid - initialize core as a Device\n"); ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ dwc_otg_dump_global_registers(core_if); ++ dwc_otg_dump_dev_registers(core_if); ++ } ++ } ++} ++ ++void dwc_otg_adp_init(dwc_otg_core_if_t * core_if) ++{ ++ core_if->adp.adp_started = 0; ++ core_if->adp.initial_probe = 0; ++ core_if->adp.probe_timer_values[0] = -1; ++ core_if->adp.probe_timer_values[1] = -1; ++ core_if->adp.probe_enabled = 0; ++ core_if->adp.sense_enabled = 0; ++ core_if->adp.sense_timer_started = 0; ++ core_if->adp.vbuson_timer_started = 0; ++ core_if->adp.probe_counter = 0; ++ core_if->adp.gpwrdn = 0; ++ core_if->adp.attached = DWC_OTG_ADP_UNKOWN; ++ /* Initialize timers */ ++ core_if->adp.sense_timer = ++ DWC_TIMER_ALLOC("ADP SENSE TIMER", adp_sense_timeout, core_if); ++ core_if->adp.vbuson_timer = ++ DWC_TIMER_ALLOC("ADP VBUS ON TIMER", adp_vbuson_timeout, core_if); ++ if (!core_if->adp.sense_timer || !core_if->adp.vbuson_timer) ++ { ++ DWC_ERROR("Could not allocate memory for ADP timers\n"); ++ } ++} ++ ++void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if) ++{ ++ gpwrdn_data_t gpwrdn = { .d32 = 0 }; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ if (core_if->adp.probe_enabled) ++ dwc_otg_adp_probe_stop(core_if); ++ if (core_if->adp.sense_enabled) ++ dwc_otg_adp_sense_stop(core_if); ++ if (core_if->adp.sense_timer_started) ++ DWC_TIMER_CANCEL(core_if->adp.sense_timer); ++ if (core_if->adp.vbuson_timer_started) ++ DWC_TIMER_CANCEL(core_if->adp.vbuson_timer); ++ DWC_TIMER_FREE(core_if->adp.sense_timer); ++ DWC_TIMER_FREE(core_if->adp.vbuson_timer); ++} ++ ++///////////////////////////////////////////////////////////////////// ++////////////// ADP Interrupt Handlers /////////////////////////////// ++///////////////////////////////////////////////////////////////////// ++/** ++ * This function sets Ramp Timer values ++ */ ++static uint32_t set_timer_value(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ if (core_if->adp.probe_timer_values[0] == -1) { ++ core_if->adp.probe_timer_values[0] = val; ++ core_if->adp.probe_timer_values[1] = -1; ++ return 1; ++ } else { ++ core_if->adp.probe_timer_values[1] = ++ core_if->adp.probe_timer_values[0]; ++ core_if->adp.probe_timer_values[0] = val; ++ return 0; ++ } ++} ++ ++/** ++ * This function compares Ramp Timer values ++ */ ++static uint32_t compare_timer_values(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t diff; ++ if (core_if->adp.probe_timer_values[0]>=core_if->adp.probe_timer_values[1]) ++ diff = core_if->adp.probe_timer_values[0]-core_if->adp.probe_timer_values[1]; ++ else ++ diff = core_if->adp.probe_timer_values[1]-core_if->adp.probe_timer_values[0]; ++ if(diff < 2) { ++ return 0; ++ } else { ++ return 1; ++ } ++} ++ ++/** ++ * This function handles ADP Probe Interrupts ++ */ ++static int32_t dwc_otg_adp_handle_prb_intr(dwc_otg_core_if_t * core_if, ++ uint32_t val) ++{ ++ adpctl_data_t adpctl = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn, temp; ++ adpctl.d32 = val; ++ ++ temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ core_if->adp.probe_counter++; ++ core_if->adp.gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (adpctl.b.rtim == 0 && !temp.b.idsts){ ++ DWC_PRINTF("RTIM value is 0\n"); ++ goto exit; ++ } ++ if (set_timer_value(core_if, adpctl.b.rtim) && ++ core_if->adp.initial_probe) { ++ core_if->adp.initial_probe = 0; ++ dwc_otg_adp_probe_stop(core_if); ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* check which value is for device mode and which for Host mode */ ++ if (!temp.b.idsts) { /* considered host mode value is 0 */ ++ /* ++ * Turn on VBUS after initial ADP probe. ++ */ ++ core_if->op_state = A_HOST; ++ dwc_otg_enable_global_interrupts(core_if); ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_hcd_start(core_if); ++ dwc_otg_adp_turnon_vbus(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ } else { ++ /* ++ * Initiate SRP after initial ADP probe. ++ */ ++ dwc_otg_enable_global_interrupts(core_if); ++ dwc_otg_initiate_srp(core_if); ++ } ++ } else if (core_if->adp.probe_counter > 2){ ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (compare_timer_values(core_if)) { ++ DWC_PRINTF("Difference in timer values !!! \n"); ++// core_if->adp.attached = DWC_OTG_ADP_ATTACHED; ++ dwc_otg_adp_probe_stop(core_if); ++ ++ /* Power on the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ } ++ ++ /* check which value is for device mode and which for Host mode */ ++ if (!temp.b.idsts) { /* considered host mode value is 0 */ ++ /* Disable Interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, gpwrdn.d32, 0); ++ ++ /* ++ * Initialize the Core for Host mode. ++ */ ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ } else { ++ gotgctl_data_t gotgctl; ++ /* Mask SRP detected interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.srp_det_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, gpwrdn.d32, 0); ++ ++ /* Disable Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, gpwrdn.d32, 0); ++ ++ /* ++ * Initialize the Core for Device mode. ++ */ ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ ++ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ if (!gotgctl.b.bsesvld) { ++ dwc_otg_initiate_srp(core_if); ++ } ++ } ++ } ++ if (core_if->power_down == 2) { ++ if (gpwrdn.b.bsessvld) { ++ /* Mask SRP detected interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.srp_det_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Disable Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* ++ * Initialize the Core for Device mode. ++ */ ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } ++ } ++ } ++exit: ++ /* Clear interrupt */ ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ adpctl.b.adp_prb_int = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ return 0; ++} ++ ++/** ++ * This function hadles ADP Sense Interrupt ++ */ ++static int32_t dwc_otg_adp_handle_sns_intr(dwc_otg_core_if_t * core_if) ++{ ++ adpctl_data_t adpctl; ++ /* Stop ADP Sense timer */ ++ DWC_TIMER_CANCEL(core_if->adp.sense_timer); ++ ++ /* Restart ADP Sense timer */ ++ dwc_otg_adp_sense_timer_start(core_if); ++ ++ /* Clear interrupt */ ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ adpctl.b.adp_sns_int = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ return 0; ++} ++ ++/** ++ * This function handles ADP Probe Interrupts ++ */ ++static int32_t dwc_otg_adp_handle_prb_tmout_intr(dwc_otg_core_if_t * core_if, ++ uint32_t val) ++{ ++ adpctl_data_t adpctl = {.d32 = 0 }; ++ adpctl.d32 = val; ++ set_timer_value(core_if, adpctl.b.rtim); ++ ++ /* Clear interrupt */ ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ adpctl.b.adp_tmout_int = 1; ++ dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ ++ return 0; ++} ++ ++/** ++ * ADP Interrupt handler. ++ * ++ */ ++int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if) ++{ ++ int retval = 0; ++ adpctl_data_t adpctl = {.d32 = 0}; ++ ++ adpctl.d32 = dwc_otg_adp_read_reg(core_if); ++ DWC_PRINTF("ADPCTL = %08x\n",adpctl.d32); ++ ++ if (adpctl.b.adp_sns_int & adpctl.b.adp_sns_int_msk) { ++ DWC_PRINTF("ADP Sense interrupt\n"); ++ retval |= dwc_otg_adp_handle_sns_intr(core_if); ++ } ++ if (adpctl.b.adp_tmout_int & adpctl.b.adp_tmout_int_msk) { ++ DWC_PRINTF("ADP timeout interrupt\n"); ++ retval |= dwc_otg_adp_handle_prb_tmout_intr(core_if, adpctl.d32); ++ } ++ if (adpctl.b.adp_prb_int & adpctl.b.adp_prb_int_msk) { ++ DWC_PRINTF("ADP Probe interrupt\n"); ++ adpctl.b.adp_prb_int = 1; ++ retval |= dwc_otg_adp_handle_prb_intr(core_if, adpctl.d32); ++ } ++ ++// dwc_otg_adp_modify_reg(core_if, adpctl.d32, 0); ++ //dwc_otg_adp_write_reg(core_if, adpctl.d32); ++ DWC_PRINTF("RETURN FROM ADP ISR\n"); ++ ++ return retval; ++} ++ ++/** ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if) ++{ ++ ++#ifndef DWC_HOST_ONLY ++ hprt0_data_t hprt0; ++ gpwrdn_data_t gpwrdn; ++ DWC_DEBUGPL(DBG_ANY, "++ Power Down Logic Session Request Interrupt++\n"); ++ ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ /* check which value is for device mode and which for Host mode */ ++ if (!gpwrdn.b.idsts) { /* considered host mode value is 0 */ ++ DWC_PRINTF("SRP: Host mode\n"); ++ ++ if (core_if->adp_enable) { ++ dwc_otg_adp_probe_stop(core_if); ++ ++ /* Power on the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ } ++ ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ } ++ ++ /* Turn on the port power bit. */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* Start the Connection timer. So a message can be displayed ++ * if connect does not occur within 10 seconds. */ ++ cil_hcd_session_start(core_if); ++ } else { ++ DWC_PRINTF("SRP: Device mode %s\n", __FUNCTION__); ++ if (core_if->adp_enable) { ++ dwc_otg_adp_probe_stop(core_if); ++ ++ /* Power on the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ } ++ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 0; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, ++ gpwrdn.d32); ++ ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } ++ } ++#endif ++ return 1; ++} +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_adp.h +@@ -0,0 +1,80 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.h $ ++ * $Revision: #7 $ ++ * $Date: 2011/10/24 $ ++ * $Change: 1871159 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#ifndef __DWC_OTG_ADP_H__ ++#define __DWC_OTG_ADP_H__ ++ ++/** ++ * @file ++ * ++ * This file contains the Attach Detect Protocol interfaces and defines ++ * (functions) and structures for Linux. ++ * ++ */ ++ ++#define DWC_OTG_ADP_UNATTACHED 0 ++#define DWC_OTG_ADP_ATTACHED 1 ++#define DWC_OTG_ADP_UNKOWN 2 ++ ++typedef struct dwc_otg_adp { ++ uint32_t adp_started; ++ uint32_t initial_probe; ++ int32_t probe_timer_values[2]; ++ uint32_t probe_enabled; ++ uint32_t sense_enabled; ++ dwc_timer_t *sense_timer; ++ uint32_t sense_timer_started; ++ dwc_timer_t *vbuson_timer; ++ uint32_t vbuson_timer_started; ++ uint32_t attached; ++ uint32_t probe_counter; ++ uint32_t gpwrdn; ++} dwc_otg_adp_t; ++ ++/** ++ * Attach Detect Protocol functions ++ */ ++ ++extern void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value); ++extern uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if); ++extern uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if); ++extern uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if); ++extern uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if); ++extern uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host); ++extern void dwc_otg_adp_init(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if); ++extern int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if); ++extern int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if); ++ ++#endif //__DWC_OTG_ADP_H__ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_attr.c +@@ -0,0 +1,1210 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $ ++ * $Revision: #44 $ ++ * $Date: 2010/11/29 $ ++ * $Change: 1636033 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * The diagnostic interface will provide access to the controller for ++ * bringing up the hardware and testing. The Linux driver attributes ++ * feature will be used to provide the Linux Diagnostic ++ * Interface. These attributes are accessed through sysfs. ++ */ ++ ++/** @page "Linux Module Attributes" ++ * ++ * The Linux module attributes feature is used to provide the Linux ++ * Diagnostic Interface. These attributes are accessed through sysfs. ++ * The diagnostic interface will provide access to the controller for ++ * bringing up the hardware and testing. ++ ++ The following table shows the attributes. ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
Name Description Access
mode Returns the current mode: 0 for device mode, 1 for host mode Read
hnpcapable Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register. ++ Read returns the current value. Read/Write
srpcapable Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register. ++ Read returns the current value. Read/Write
hsic_connect Gets or sets the "HSIC-Connect" bit in the GLPMCFG Register. ++ Read returns the current value. Read/Write
inv_sel_hsic Gets or sets the "Invert Select HSIC" bit in the GLPMFG Register. ++ Read returns the current value. Read/Write
hnp Initiates the Host Negotiation Protocol. Read returns the status. Read/Write
srp Initiates the Session Request Protocol. Read returns the status. Read/Write
buspower Gets or sets the Power State of the bus (0 - Off or 1 - On) Read/Write
bussuspend Suspends the USB bus. Read/Write
busconnected Gets the connection status of the bus Read
gotgctl Gets or sets the Core Control Status Register. Read/Write
gusbcfg Gets or sets the Core USB Configuration Register Read/Write
grxfsiz Gets or sets the Receive FIFO Size Register Read/Write
gnptxfsiz Gets or sets the non-periodic Transmit Size Register Read/Write
gpvndctl Gets or sets the PHY Vendor Control Register Read/Write
ggpio Gets the value in the lower 16-bits of the General Purpose IO Register ++ or sets the upper 16 bits. Read/Write
guid Gets or sets the value of the User ID Register Read/Write
gsnpsid Gets the value of the Synopsys ID Regester Read
devspeed Gets or sets the device speed setting in the DCFG register Read/Write
enumspeed Gets the device enumeration Speed. Read
hptxfsiz Gets the value of the Host Periodic Transmit FIFO Read
hprt0 Gets or sets the value in the Host Port Control and Status Register Read/Write
regoffset Sets the register offset for the next Register Access Read/Write
regvalue Gets or sets the value of the register at the offset in the regoffset attribute. Read/Write
remote_wakeup On read, shows the status of Remote Wakeup. On write, initiates a remote ++ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote ++ Wakeup signalling bit in the Device Control Register is set for 1 ++ milli-second. Read/Write
rem_wakeup_pwrdn On read, shows the status core - hibernated or not. On write, initiates ++ a remote wakeup of the device from Hibernation. Read/Write
mode_ch_tim_en This bit is used to enable or disable the host core to wait for 200 PHY ++ clock cycles at the end of Resume to change the opmode signal to the PHY to 00 ++ after Suspend or LPM. Read/Write
fr_interval On read, shows the value of HFIR Frame Interval. On write, dynamically ++ reload HFIR register during runtime. The application can write a value to this ++ register only after the Port Enable bit of the Host Port Control and Status ++ register (HPRT.PrtEnaPort) has been set Read/Write
disconnect_us On read, shows the status of disconnect_device_us. On write, sets disconnect_us ++ which causes soft disconnect for 100us. Applicable only for device mode of operation. Read/Write
regdump Dumps the contents of core registers. Read
spramdump Dumps the contents of core registers. Read
hcddump Dumps the current HCD state. Read
hcd_frrem Shows the average value of the Frame Remaining ++ field in the Host Frame Number/Frame Remaining register when an SOF interrupt ++ occurs. This can be used to determine the average interrupt latency. Also ++ shows the average Frame Remaining value for start_transfer and the "a" and ++ "b" sample points. The "a" and "b" sample points may be used during debugging ++ bto determine how long it takes to execute a section of the HCD code. Read
rd_reg_test Displays the time required to read the GNPTXFSIZ register many times ++ (the output shows the number of times the register is read). ++ Read
wr_reg_test Displays the time required to write the GNPTXFSIZ register many times ++ (the output shows the number of times the register is written). ++ Read
lpm_response Gets or sets lpm_response mode. Applicable only in device mode. ++ Write
sleep_status Shows sleep status of device. ++ Read
++ ++ Example usage: ++ To get the current mode: ++ cat /sys/devices/lm0/mode ++ ++ To power down the USB: ++ echo 0 > /sys/devices/lm0/buspower ++ */ ++ ++#include "dwc_otg_os_dep.h" ++#include "dwc_os.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_attr.h" ++#include "dwc_otg_core_if.h" ++#include "dwc_otg_pcd_if.h" ++#include "dwc_otg_hcd_if.h" ++ ++/* ++ * MACROs for defining sysfs attribute ++ */ ++#ifdef LM_INTERFACE ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ ++ uint32_t val; \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ ++ uint32_t set = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ ++ return count; \ ++} ++ ++#elif defined(PCI_INTERFACE) ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t val; \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t set = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ ++ return count; \ ++} ++ ++#elif defined(PLATFORM_INTERFACE) ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ struct platform_device *platform_dev = \ ++ container_of(_dev, struct platform_device, dev); \ ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ ++ uint32_t val; \ ++ DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \ ++ __func__, _dev, platform_dev, otg_dev); \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ ++ uint32_t set = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ ++ return count; \ ++} ++#endif ++ ++/* ++ * MACROs for defining sysfs attribute for 32-bit registers ++ */ ++#ifdef LM_INTERFACE ++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ ++ uint32_t val; \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ ++ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ ++ uint32_t val = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ ++ return count; \ ++} ++#elif defined(PCI_INTERFACE) ++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t val; \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t val = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ ++ return count; \ ++} ++ ++#elif defined(PLATFORM_INTERFACE) ++#include "dwc_otg_dbg.h" ++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ ++ uint32_t val; \ ++ DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \ ++ __func__, _dev, platform_dev, otg_dev); \ ++ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ ++ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ ++ uint32_t val = simple_strtoul(buf, NULL, 16); \ ++ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ ++ return count; \ ++} ++ ++#endif ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_string_) \ ++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_string_) \ ++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); ++ ++#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \ ++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); ++ ++#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \ ++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); ++ ++/** @name Functions for Show/Store of Attributes */ ++/**@{*/ ++ ++/** ++ * Helper function returning the otg_device structure of the given device ++ */ ++static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev) ++{ ++ dwc_otg_device_t *otg_dev; ++ DWC_OTG_GETDRVDEV(otg_dev, _dev); ++ return otg_dev; ++} ++ ++/** ++ * Show the register offset of the Register Access. ++ */ ++static ssize_t regoffset_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return snprintf(buf, sizeof("0xFFFFFFFF\n") + 1, "0x%08x\n", ++ otg_dev->os_dep.reg_offset); ++} ++ ++/** ++ * Set the register offset for the next Register Access Read/Write ++ */ ++static ssize_t regoffset_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t offset = simple_strtoul(buf, NULL, 16); ++#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) ++ if (offset < SZ_256K) { ++#elif defined(PCI_INTERFACE) ++ if (offset < 0x00040000) { ++#endif ++ otg_dev->os_dep.reg_offset = offset; ++ } else { ++ dev_err(_dev, "invalid offset\n"); ++ } ++ ++ return count; ++} ++ ++DEVICE_ATTR(regoffset, S_IRUGO | S_IWUSR, regoffset_show, regoffset_store); ++ ++/** ++ * Show the value of the register at the offset in the reg_offset ++ * attribute. ++ */ ++static ssize_t regvalue_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t val; ++ volatile uint32_t *addr; ++ ++ if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) { ++ /* Calculate the address */ ++ addr = (uint32_t *) (otg_dev->os_dep.reg_offset + ++ (uint8_t *) otg_dev->os_dep.base); ++ val = DWC_READ_REG32(addr); ++ return snprintf(buf, ++ sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n") + 1, ++ "Reg@0x%06x = 0x%08x\n", otg_dev->os_dep.reg_offset, ++ val); ++ } else { ++ dev_err(_dev, "Invalid offset (0x%0x)\n", otg_dev->os_dep.reg_offset); ++ return sprintf(buf, "invalid offset\n"); ++ } ++} ++ ++/** ++ * Store the value in the register at the offset in the reg_offset ++ * attribute. ++ * ++ */ ++static ssize_t regvalue_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ volatile uint32_t *addr; ++ uint32_t val = simple_strtoul(buf, NULL, 16); ++ //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val); ++ if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) { ++ /* Calculate the address */ ++ addr = (uint32_t *) (otg_dev->os_dep.reg_offset + ++ (uint8_t *) otg_dev->os_dep.base); ++ DWC_WRITE_REG32(addr, val); ++ } else { ++ dev_err(_dev, "Invalid Register Offset (0x%08x)\n", ++ otg_dev->os_dep.reg_offset); ++ } ++ return count; ++} ++ ++DEVICE_ATTR(regvalue, S_IRUGO | S_IWUSR, regvalue_show, regvalue_store); ++ ++/* ++ * Attributes ++ */ ++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode, "Mode"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable, "HNPCapable"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable, "SRPCapable"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hsic_connect, "HSIC Connect"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(inv_sel_hsic, "Invert Select HSIC"); ++ ++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); ++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected, "Bus Connected"); ++ ++DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl, 0, "GOTGCTL"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg, ++ &(otg_dev->core_if->core_global_regs->gusbcfg), ++ "GUSBCFG"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz, ++ &(otg_dev->core_if->core_global_regs->grxfsiz), ++ "GRXFSIZ"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz, ++ &(otg_dev->core_if->core_global_regs->gnptxfsiz), ++ "GNPTXFSIZ"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl, ++ &(otg_dev->core_if->core_global_regs->gpvndctl), ++ "GPVNDCTL"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio, ++ &(otg_dev->core_if->core_global_regs->ggpio), ++ "GGPIO"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(guid, &(otg_dev->core_if->core_global_regs->guid), ++ "GUID"); ++DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid, ++ &(otg_dev->core_if->core_global_regs->gsnpsid), ++ "GSNPSID"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed, "Device Speed"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed, "Device Enumeration Speed"); ++ ++DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz, ++ &(otg_dev->core_if->core_global_regs->hptxfsiz), ++ "HPTXFSIZ"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0, otg_dev->core_if->host_if->hprt0, "HPRT0"); ++ ++/** ++ * @todo Add code to initiate the HNP. ++ */ ++/** ++ * Show the HNP status bit ++ */ ++static ssize_t hnp_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "HstNegScs = 0x%x\n", ++ dwc_otg_get_hnpstatus(otg_dev->core_if)); ++} ++ ++/** ++ * Set the HNP Request bit ++ */ ++static ssize_t hnp_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t in = simple_strtoul(buf, NULL, 16); ++ dwc_otg_set_hnpreq(otg_dev->core_if, in); ++ return count; ++} ++ ++DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store); ++ ++/** ++ * @todo Add code to initiate the SRP. ++ */ ++/** ++ * Show the SRP status bit ++ */ ++static ssize_t srp_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "SesReqScs = 0x%x\n", ++ dwc_otg_get_srpstatus(otg_dev->core_if)); ++#else ++ return sprintf(buf, "Host Only Mode!\n"); ++#endif ++} ++ ++/** ++ * Set the SRP Request bit ++ */ ++static ssize_t srp_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ dwc_otg_pcd_initiate_srp(otg_dev->pcd); ++#endif ++ return count; ++} ++ ++DEVICE_ATTR(srp, 0644, srp_show, srp_store); ++ ++/** ++ * @todo Need to do more for power on/off? ++ */ ++/** ++ * Show the Bus Power status ++ */ ++static ssize_t buspower_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "Bus Power = 0x%x\n", ++ dwc_otg_get_prtpower(otg_dev->core_if)); ++} ++ ++/** ++ * Set the Bus Power status ++ */ ++static ssize_t buspower_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t on = simple_strtoul(buf, NULL, 16); ++ dwc_otg_set_prtpower(otg_dev->core_if, on); ++ return count; ++} ++ ++DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store); ++ ++/** ++ * @todo Need to do more for suspend? ++ */ ++/** ++ * Show the Bus Suspend status ++ */ ++static ssize_t bussuspend_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "Bus Suspend = 0x%x\n", ++ dwc_otg_get_prtsuspend(otg_dev->core_if)); ++} ++ ++/** ++ * Set the Bus Suspend status ++ */ ++static ssize_t bussuspend_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t in = simple_strtoul(buf, NULL, 16); ++ dwc_otg_set_prtsuspend(otg_dev->core_if, in); ++ return count; ++} ++ ++DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store); ++ ++/** ++ * Show the Mode Change Ready Timer status ++ */ ++static ssize_t mode_ch_tim_en_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "Mode Change Ready Timer Enable = 0x%x\n", ++ dwc_otg_get_mode_ch_tim(otg_dev->core_if)); ++} ++ ++/** ++ * Set the Mode Change Ready Timer status ++ */ ++static ssize_t mode_ch_tim_en_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t in = simple_strtoul(buf, NULL, 16); ++ dwc_otg_set_mode_ch_tim(otg_dev->core_if, in); ++ return count; ++} ++ ++DEVICE_ATTR(mode_ch_tim_en, 0644, mode_ch_tim_en_show, mode_ch_tim_en_store); ++ ++/** ++ * Show the value of HFIR Frame Interval bitfield ++ */ ++static ssize_t fr_interval_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "Frame Interval = 0x%x\n", ++ dwc_otg_get_fr_interval(otg_dev->core_if)); ++} ++ ++/** ++ * Set the HFIR Frame Interval value ++ */ ++static ssize_t fr_interval_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t in = simple_strtoul(buf, NULL, 10); ++ dwc_otg_set_fr_interval(otg_dev->core_if, in); ++ return count; ++} ++ ++DEVICE_ATTR(fr_interval, 0644, fr_interval_show, fr_interval_store); ++ ++/** ++ * Show the status of Remote Wakeup. ++ */ ++static ssize_t remote_wakeup_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ return sprintf(buf, ++ "Remote Wakeup Sig = %d Enabled = %d LPM Remote Wakeup = %d\n", ++ dwc_otg_get_remotewakesig(otg_dev->core_if), ++ dwc_otg_pcd_get_rmwkup_enable(otg_dev->pcd), ++ dwc_otg_get_lpm_remotewakeenabled(otg_dev->core_if)); ++#else ++ return sprintf(buf, "Host Only Mode!\n"); ++#endif /* DWC_HOST_ONLY */ ++} ++ ++/** ++ * Initiate a remote wakeup of the host. The Device control register ++ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable ++ * flag is set. ++ * ++ */ ++static ssize_t remote_wakeup_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t val = simple_strtoul(buf, NULL, 16); ++ ++ if (val & 1) { ++ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1); ++ } else { ++ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0); ++ } ++#endif /* DWC_HOST_ONLY */ ++ return count; ++} ++ ++DEVICE_ATTR(remote_wakeup, S_IRUGO | S_IWUSR, remote_wakeup_show, ++ remote_wakeup_store); ++ ++/** ++ * Show the whether core is hibernated or not. ++ */ ++static ssize_t rem_wakeup_pwrdn_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ if (dwc_otg_get_core_state(otg_dev->core_if)) { ++ DWC_PRINTF("Core is in hibernation\n"); ++ } else { ++ DWC_PRINTF("Core is not in hibernation\n"); ++ } ++#endif /* DWC_HOST_ONLY */ ++ return 0; ++} ++ ++extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, ++ int rem_wakeup, int reset); ++ ++/** ++ * Initiate a remote wakeup of the device to exit from hibernation. ++ */ ++static ssize_t rem_wakeup_pwrdn_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ dwc_otg_device_hibernation_restore(otg_dev->core_if, 1, 0); ++#endif ++ return count; ++} ++ ++DEVICE_ATTR(rem_wakeup_pwrdn, S_IRUGO | S_IWUSR, rem_wakeup_pwrdn_show, ++ rem_wakeup_pwrdn_store); ++ ++static ssize_t disconnect_us(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t val = simple_strtoul(buf, NULL, 16); ++ DWC_PRINTF("The Passed value is %04x\n", val); ++ ++ dwc_otg_pcd_disconnect_us(otg_dev->pcd, 50); ++ ++#endif /* DWC_HOST_ONLY */ ++ return count; ++} ++ ++DEVICE_ATTR(disconnect_us, S_IWUSR, 0, disconnect_us); ++ ++/** ++ * Dump global registers and either host or device registers (depending on the ++ * current mode of the core). ++ */ ++static ssize_t regdump_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ dwc_otg_dump_global_registers(otg_dev->core_if); ++ if (dwc_otg_is_host_mode(otg_dev->core_if)) { ++ dwc_otg_dump_host_registers(otg_dev->core_if); ++ } else { ++ dwc_otg_dump_dev_registers(otg_dev->core_if); ++ ++ } ++ return sprintf(buf, "Register Dump\n"); ++} ++ ++DEVICE_ATTR(regdump, S_IRUGO, regdump_show, 0); ++ ++/** ++ * Dump global registers and either host or device registers (depending on the ++ * current mode of the core). ++ */ ++static ssize_t spramdump_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ //dwc_otg_dump_spram(otg_dev->core_if); ++ ++ return sprintf(buf, "SPRAM Dump\n"); ++} ++ ++DEVICE_ATTR(spramdump, S_IRUGO, spramdump_show, 0); ++ ++/** ++ * Dump the current hcd state. ++ */ ++static ssize_t hcddump_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_DEVICE_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ dwc_otg_hcd_dump_state(otg_dev->hcd); ++#endif /* DWC_DEVICE_ONLY */ ++ return sprintf(buf, "HCD Dump\n"); ++} ++ ++DEVICE_ATTR(hcddump, S_IRUGO, hcddump_show, 0); ++ ++/** ++ * Dump the average frame remaining at SOF. This can be used to ++ * determine average interrupt latency. Frame remaining is also shown for ++ * start transfer and two additional sample points. ++ */ ++static ssize_t hcd_frrem_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++#ifndef DWC_DEVICE_ONLY ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ dwc_otg_hcd_dump_frrem(otg_dev->hcd); ++#endif /* DWC_DEVICE_ONLY */ ++ return sprintf(buf, "HCD Dump Frame Remaining\n"); ++} ++ ++DEVICE_ATTR(hcd_frrem, S_IRUGO, hcd_frrem_show, 0); ++ ++/** ++ * Displays the time required to read the GNPTXFSIZ register many times (the ++ * output shows the number of times the register is read). ++ */ ++#define RW_REG_COUNT 10000000 ++#define MSEC_PER_JIFFIE 1000/HZ ++static ssize_t rd_reg_test_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ int i; ++ int time; ++ int start_jiffies; ++ ++ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", ++ HZ, MSEC_PER_JIFFIE, loops_per_jiffy); ++ start_jiffies = jiffies; ++ for (i = 0; i < RW_REG_COUNT; i++) { ++ dwc_otg_get_gnptxfsiz(otg_dev->core_if); ++ } ++ time = jiffies - start_jiffies; ++ return sprintf(buf, ++ "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", ++ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time); ++} ++ ++DEVICE_ATTR(rd_reg_test, S_IRUGO, rd_reg_test_show, 0); ++ ++/** ++ * Displays the time required to write the GNPTXFSIZ register many times (the ++ * output shows the number of times the register is written). ++ */ ++static ssize_t wr_reg_test_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t reg_val; ++ int i; ++ int time; ++ int start_jiffies; ++ ++ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", ++ HZ, MSEC_PER_JIFFIE, loops_per_jiffy); ++ reg_val = dwc_otg_get_gnptxfsiz(otg_dev->core_if); ++ start_jiffies = jiffies; ++ for (i = 0; i < RW_REG_COUNT; i++) { ++ dwc_otg_set_gnptxfsiz(otg_dev->core_if, reg_val); ++ } ++ time = jiffies - start_jiffies; ++ return sprintf(buf, ++ "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", ++ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time); ++} ++ ++DEVICE_ATTR(wr_reg_test, S_IRUGO, wr_reg_test_show, 0); ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ ++/** ++* Show the lpm_response attribute. ++*/ ++static ssize_t lpmresp_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ ++ if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) ++ return sprintf(buf, "** LPM is DISABLED **\n"); ++ ++ if (!dwc_otg_is_device_mode(otg_dev->core_if)) { ++ return sprintf(buf, "** Current mode is not device mode\n"); ++ } ++ return sprintf(buf, "lpm_response = %d\n", ++ dwc_otg_get_lpmresponse(otg_dev->core_if)); ++} ++ ++/** ++* Store the lpm_response attribute. ++*/ ++static ssize_t lpmresp_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ uint32_t val = simple_strtoul(buf, NULL, 16); ++ ++ if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) { ++ return 0; ++ } ++ ++ if (!dwc_otg_is_device_mode(otg_dev->core_if)) { ++ return 0; ++ } ++ ++ dwc_otg_set_lpmresponse(otg_dev->core_if, val); ++ return count; ++} ++ ++DEVICE_ATTR(lpm_response, S_IRUGO | S_IWUSR, lpmresp_show, lpmresp_store); ++ ++/** ++* Show the sleep_status attribute. ++*/ ++static ssize_t sleepstatus_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ return sprintf(buf, "Sleep Status = %d\n", ++ dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)); ++} ++ ++/** ++ * Store the sleep_status attribure. ++ */ ++static ssize_t sleepstatus_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); ++ dwc_otg_core_if_t *core_if = otg_dev->core_if; ++ ++ if (dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)) { ++ if (dwc_otg_is_host_mode(core_if)) { ++ ++ DWC_PRINTF("Host initiated resume\n"); ++ dwc_otg_set_prtresume(otg_dev->core_if, 1); ++ } ++ } ++ ++ return count; ++} ++ ++DEVICE_ATTR(sleep_status, S_IRUGO | S_IWUSR, sleepstatus_show, ++ sleepstatus_store); ++ ++#endif /* CONFIG_USB_DWC_OTG_LPM_ENABLE */ ++ ++/**@}*/ ++ ++/** ++ * Create the device files ++ */ ++void dwc_otg_attr_create( ++#ifdef LM_INTERFACE ++ struct lm_device *dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ) ++{ ++ int error; ++ ++ error = device_create_file(&dev->dev, &dev_attr_regoffset); ++ error = device_create_file(&dev->dev, &dev_attr_regvalue); ++ error = device_create_file(&dev->dev, &dev_attr_mode); ++ error = device_create_file(&dev->dev, &dev_attr_hnpcapable); ++ error = device_create_file(&dev->dev, &dev_attr_srpcapable); ++ error = device_create_file(&dev->dev, &dev_attr_hsic_connect); ++ error = device_create_file(&dev->dev, &dev_attr_inv_sel_hsic); ++ error = device_create_file(&dev->dev, &dev_attr_hnp); ++ error = device_create_file(&dev->dev, &dev_attr_srp); ++ error = device_create_file(&dev->dev, &dev_attr_buspower); ++ error = device_create_file(&dev->dev, &dev_attr_bussuspend); ++ error = device_create_file(&dev->dev, &dev_attr_mode_ch_tim_en); ++ error = device_create_file(&dev->dev, &dev_attr_fr_interval); ++ error = device_create_file(&dev->dev, &dev_attr_busconnected); ++ error = device_create_file(&dev->dev, &dev_attr_gotgctl); ++ error = device_create_file(&dev->dev, &dev_attr_gusbcfg); ++ error = device_create_file(&dev->dev, &dev_attr_grxfsiz); ++ error = device_create_file(&dev->dev, &dev_attr_gnptxfsiz); ++ error = device_create_file(&dev->dev, &dev_attr_gpvndctl); ++ error = device_create_file(&dev->dev, &dev_attr_ggpio); ++ error = device_create_file(&dev->dev, &dev_attr_guid); ++ error = device_create_file(&dev->dev, &dev_attr_gsnpsid); ++ error = device_create_file(&dev->dev, &dev_attr_devspeed); ++ error = device_create_file(&dev->dev, &dev_attr_enumspeed); ++ error = device_create_file(&dev->dev, &dev_attr_hptxfsiz); ++ error = device_create_file(&dev->dev, &dev_attr_hprt0); ++ error = device_create_file(&dev->dev, &dev_attr_remote_wakeup); ++ error = device_create_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn); ++ error = device_create_file(&dev->dev, &dev_attr_disconnect_us); ++ error = device_create_file(&dev->dev, &dev_attr_regdump); ++ error = device_create_file(&dev->dev, &dev_attr_spramdump); ++ error = device_create_file(&dev->dev, &dev_attr_hcddump); ++ error = device_create_file(&dev->dev, &dev_attr_hcd_frrem); ++ error = device_create_file(&dev->dev, &dev_attr_rd_reg_test); ++ error = device_create_file(&dev->dev, &dev_attr_wr_reg_test); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ error = device_create_file(&dev->dev, &dev_attr_lpm_response); ++ error = device_create_file(&dev->dev, &dev_attr_sleep_status); ++#endif ++} ++ ++/** ++ * Remove the device files ++ */ ++void dwc_otg_attr_remove( ++#ifdef LM_INTERFACE ++ struct lm_device *dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ) ++{ ++ device_remove_file(&dev->dev, &dev_attr_regoffset); ++ device_remove_file(&dev->dev, &dev_attr_regvalue); ++ device_remove_file(&dev->dev, &dev_attr_mode); ++ device_remove_file(&dev->dev, &dev_attr_hnpcapable); ++ device_remove_file(&dev->dev, &dev_attr_srpcapable); ++ device_remove_file(&dev->dev, &dev_attr_hsic_connect); ++ device_remove_file(&dev->dev, &dev_attr_inv_sel_hsic); ++ device_remove_file(&dev->dev, &dev_attr_hnp); ++ device_remove_file(&dev->dev, &dev_attr_srp); ++ device_remove_file(&dev->dev, &dev_attr_buspower); ++ device_remove_file(&dev->dev, &dev_attr_bussuspend); ++ device_remove_file(&dev->dev, &dev_attr_mode_ch_tim_en); ++ device_remove_file(&dev->dev, &dev_attr_fr_interval); ++ device_remove_file(&dev->dev, &dev_attr_busconnected); ++ device_remove_file(&dev->dev, &dev_attr_gotgctl); ++ device_remove_file(&dev->dev, &dev_attr_gusbcfg); ++ device_remove_file(&dev->dev, &dev_attr_grxfsiz); ++ device_remove_file(&dev->dev, &dev_attr_gnptxfsiz); ++ device_remove_file(&dev->dev, &dev_attr_gpvndctl); ++ device_remove_file(&dev->dev, &dev_attr_ggpio); ++ device_remove_file(&dev->dev, &dev_attr_guid); ++ device_remove_file(&dev->dev, &dev_attr_gsnpsid); ++ device_remove_file(&dev->dev, &dev_attr_devspeed); ++ device_remove_file(&dev->dev, &dev_attr_enumspeed); ++ device_remove_file(&dev->dev, &dev_attr_hptxfsiz); ++ device_remove_file(&dev->dev, &dev_attr_hprt0); ++ device_remove_file(&dev->dev, &dev_attr_remote_wakeup); ++ device_remove_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn); ++ device_remove_file(&dev->dev, &dev_attr_disconnect_us); ++ device_remove_file(&dev->dev, &dev_attr_regdump); ++ device_remove_file(&dev->dev, &dev_attr_spramdump); ++ device_remove_file(&dev->dev, &dev_attr_hcddump); ++ device_remove_file(&dev->dev, &dev_attr_hcd_frrem); ++ device_remove_file(&dev->dev, &dev_attr_rd_reg_test); ++ device_remove_file(&dev->dev, &dev_attr_wr_reg_test); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ device_remove_file(&dev->dev, &dev_attr_lpm_response); ++ device_remove_file(&dev->dev, &dev_attr_sleep_status); ++#endif ++} +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_attr.h +@@ -0,0 +1,89 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $ ++ * $Revision: #13 $ ++ * $Date: 2010/06/21 $ ++ * $Change: 1532021 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_OTG_ATTR_H__) ++#define __DWC_OTG_ATTR_H__ ++ ++/** @file ++ * This file contains the interface to the Linux device attributes. ++ */ ++extern struct device_attribute dev_attr_regoffset; ++extern struct device_attribute dev_attr_regvalue; ++ ++extern struct device_attribute dev_attr_mode; ++extern struct device_attribute dev_attr_hnpcapable; ++extern struct device_attribute dev_attr_srpcapable; ++extern struct device_attribute dev_attr_hnp; ++extern struct device_attribute dev_attr_srp; ++extern struct device_attribute dev_attr_buspower; ++extern struct device_attribute dev_attr_bussuspend; ++extern struct device_attribute dev_attr_mode_ch_tim_en; ++extern struct device_attribute dev_attr_fr_interval; ++extern struct device_attribute dev_attr_busconnected; ++extern struct device_attribute dev_attr_gotgctl; ++extern struct device_attribute dev_attr_gusbcfg; ++extern struct device_attribute dev_attr_grxfsiz; ++extern struct device_attribute dev_attr_gnptxfsiz; ++extern struct device_attribute dev_attr_gpvndctl; ++extern struct device_attribute dev_attr_ggpio; ++extern struct device_attribute dev_attr_guid; ++extern struct device_attribute dev_attr_gsnpsid; ++extern struct device_attribute dev_attr_devspeed; ++extern struct device_attribute dev_attr_enumspeed; ++extern struct device_attribute dev_attr_hptxfsiz; ++extern struct device_attribute dev_attr_hprt0; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++extern struct device_attribute dev_attr_lpm_response; ++extern struct device_attribute devi_attr_sleep_status; ++#endif ++ ++void dwc_otg_attr_create( ++#ifdef LM_INTERFACE ++ struct lm_device *dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ); ++ ++void dwc_otg_attr_remove( ++#ifdef LM_INTERFACE ++ struct lm_device *dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ); ++#endif +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_cfi.c +@@ -0,0 +1,1876 @@ ++/* ========================================================================== ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * This file contains the most of the CFI(Core Feature Interface) ++ * implementation for the OTG. ++ */ ++ ++#ifdef DWC_UTE_CFI ++ ++#include "dwc_otg_pcd.h" ++#include "dwc_otg_cfi.h" ++ ++/** This definition should actually migrate to the Portability Library */ ++#define DWC_CONSTANT_CPU_TO_LE16(x) (x) ++ ++extern dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex); ++ ++static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen); ++static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen, ++ struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *ctrl_req); ++static int cfi_set_feature_value(struct dwc_otg_pcd *pcd); ++static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req); ++static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req); ++static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req); ++static int cfi_preproc_reset(struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req); ++static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep); ++ ++static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if); ++static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue); ++static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue); ++ ++static uint8_t resize_fifos(dwc_otg_core_if_t * core_if); ++ ++/** This is the header of the all features descriptor */ ++static cfi_all_features_header_t all_props_desc_header = { ++ .wVersion = DWC_CONSTANT_CPU_TO_LE16(0x100), ++ .wCoreID = DWC_CONSTANT_CPU_TO_LE16(CFI_CORE_ID_OTG), ++ .wNumFeatures = DWC_CONSTANT_CPU_TO_LE16(9), ++}; ++ ++/** This is an array of statically allocated feature descriptors */ ++static cfi_feature_desc_header_t prop_descs[] = { ++ ++ /* FT_ID_DMA_MODE */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_MODE), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(1), ++ }, ++ ++ /* FT_ID_DMA_BUFFER_SETUP */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFFER_SETUP), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), ++ }, ++ ++ /* FT_ID_DMA_BUFF_ALIGN */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFF_ALIGN), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), ++ }, ++ ++ /* FT_ID_DMA_CONCAT_SETUP */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CONCAT_SETUP), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ //.wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), ++ }, ++ ++ /* FT_ID_DMA_CIRCULAR */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CIRCULAR), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), ++ }, ++ ++ /* FT_ID_THRESHOLD_SETUP */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_THRESHOLD_SETUP), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), ++ }, ++ ++ /* FT_ID_DFIFO_DEPTH */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DFIFO_DEPTH), ++ .bmAttributes = CFI_FEATURE_ATTR_RO, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), ++ }, ++ ++ /* FT_ID_TX_FIFO_DEPTH */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_TX_FIFO_DEPTH), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), ++ }, ++ ++ /* FT_ID_RX_FIFO_DEPTH */ ++ { ++ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_RX_FIFO_DEPTH), ++ .bmAttributes = CFI_FEATURE_ATTR_RW, ++ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), ++ } ++}; ++ ++/** The table of feature names */ ++cfi_string_t prop_name_table[] = { ++ {FT_ID_DMA_MODE, "dma_mode"}, ++ {FT_ID_DMA_BUFFER_SETUP, "buffer_setup"}, ++ {FT_ID_DMA_BUFF_ALIGN, "buffer_align"}, ++ {FT_ID_DMA_CONCAT_SETUP, "concat_setup"}, ++ {FT_ID_DMA_CIRCULAR, "buffer_circular"}, ++ {FT_ID_THRESHOLD_SETUP, "threshold_setup"}, ++ {FT_ID_DFIFO_DEPTH, "dfifo_depth"}, ++ {FT_ID_TX_FIFO_DEPTH, "txfifo_depth"}, ++ {FT_ID_RX_FIFO_DEPTH, "rxfifo_depth"}, ++ {} ++}; ++ ++/************************************************************************/ ++ ++/** ++ * Returns the name of the feature by its ID ++ * or NULL if no featute ID matches. ++ * ++ */ ++const uint8_t *get_prop_name(uint16_t prop_id, int *len) ++{ ++ cfi_string_t *pstr; ++ *len = 0; ++ ++ for (pstr = prop_name_table; pstr && pstr->s; pstr++) { ++ if (pstr->id == prop_id) { ++ *len = DWC_STRLEN(pstr->s); ++ return pstr->s; ++ } ++ } ++ return NULL; ++} ++ ++/** ++ * This function handles all CFI specific control requests. ++ * ++ * Return a negative value to stall the DCE. ++ */ ++int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl) ++{ ++ int retval = 0; ++ dwc_otg_pcd_ep_t *ep = NULL; ++ cfiobject_t *cfi = pcd->cfi; ++ struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd); ++ uint16_t wLen = DWC_LE16_TO_CPU(&ctrl->wLength); ++ uint16_t wValue = DWC_LE16_TO_CPU(&ctrl->wValue); ++ uint16_t wIndex = DWC_LE16_TO_CPU(&ctrl->wIndex); ++ uint32_t regaddr = 0; ++ uint32_t regval = 0; ++ ++ /* Save this Control Request in the CFI object. ++ * The data field will be assigned in the data stage completion CB function. ++ */ ++ cfi->ctrl_req = *ctrl; ++ cfi->ctrl_req.data = NULL; ++ ++ cfi->need_gadget_att = 0; ++ cfi->need_status_in_complete = 0; ++ ++ switch (ctrl->bRequest) { ++ case VEN_CORE_GET_FEATURES: ++ retval = cfi_core_features_buf(cfi->buf_in.buf, CFI_IN_BUF_LEN); ++ if (retval >= 0) { ++ //dump_msg(cfi->buf_in.buf, retval); ++ ep = &pcd->ep0; ++ ++ retval = min((uint16_t) retval, wLen); ++ /* Transfer this buffer to the host through the EP0-IN EP */ ++ ep->dwc_ep.dma_addr = cfi->buf_in.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_len = retval; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ } ++ retval = 0; ++ break; ++ ++ case VEN_CORE_GET_FEATURE: ++ CFI_INFO("VEN_CORE_GET_FEATURE\n"); ++ retval = cfi_get_feature_value(cfi->buf_in.buf, CFI_IN_BUF_LEN, ++ pcd, ctrl); ++ if (retval >= 0) { ++ ep = &pcd->ep0; ++ ++ retval = min((uint16_t) retval, wLen); ++ /* Transfer this buffer to the host through the EP0-IN EP */ ++ ep->dwc_ep.dma_addr = cfi->buf_in.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_len = retval; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ } ++ CFI_INFO("VEN_CORE_GET_FEATURE=%d\n", retval); ++ dump_msg(cfi->buf_in.buf, retval); ++ break; ++ ++ case VEN_CORE_SET_FEATURE: ++ CFI_INFO("VEN_CORE_SET_FEATURE\n"); ++ /* Set up an XFER to get the data stage of the control request, ++ * which is the new value of the feature to be modified. ++ */ ++ ep = &pcd->ep0; ++ ep->dwc_ep.is_in = 0; ++ ep->dwc_ep.dma_addr = cfi->buf_out.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_out.buf; ++ ep->dwc_ep.xfer_len = wLen; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ /* Read the control write's data stage */ ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ retval = 0; ++ break; ++ ++ case VEN_CORE_RESET_FEATURES: ++ CFI_INFO("VEN_CORE_RESET_FEATURES\n"); ++ cfi->need_gadget_att = 1; ++ cfi->need_status_in_complete = 1; ++ retval = cfi_preproc_reset(pcd, ctrl); ++ CFI_INFO("VEN_CORE_RESET_FEATURES = (%d)\n", retval); ++ break; ++ ++ case VEN_CORE_ACTIVATE_FEATURES: ++ CFI_INFO("VEN_CORE_ACTIVATE_FEATURES\n"); ++ break; ++ ++ case VEN_CORE_READ_REGISTER: ++ CFI_INFO("VEN_CORE_READ_REGISTER\n"); ++ /* wValue optionally contains the HI WORD of the register offset and ++ * wIndex contains the LOW WORD of the register offset ++ */ ++ if (wValue == 0) { ++ /* @TODO - MAS - fix the access to the base field */ ++ regaddr = 0; ++ //regaddr = (uint32_t) pcd->otg_dev->os_dep.base; ++ //GET_CORE_IF(pcd)->co ++ regaddr |= wIndex; ++ } else { ++ regaddr = (wValue << 16) | wIndex; ++ } ++ ++ /* Read a 32-bit value of the memory at the regaddr */ ++ regval = DWC_READ_REG32((uint32_t *) regaddr); ++ ++ ep = &pcd->ep0; ++ dwc_memcpy(cfi->buf_in.buf, ®val, sizeof(uint32_t)); ++ ep->dwc_ep.is_in = 1; ++ ep->dwc_ep.dma_addr = cfi->buf_in.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; ++ ep->dwc_ep.xfer_len = wLen; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ cfi->need_gadget_att = 0; ++ retval = 0; ++ break; ++ ++ case VEN_CORE_WRITE_REGISTER: ++ CFI_INFO("VEN_CORE_WRITE_REGISTER\n"); ++ /* Set up an XFER to get the data stage of the control request, ++ * which is the new value of the register to be modified. ++ */ ++ ep = &pcd->ep0; ++ ep->dwc_ep.is_in = 0; ++ ep->dwc_ep.dma_addr = cfi->buf_out.addr; ++ ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf; ++ ep->dwc_ep.xfer_buff = cfi->buf_out.buf; ++ ep->dwc_ep.xfer_len = wLen; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ pcd->ep0_pending = 1; ++ /* Read the control write's data stage */ ++ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); ++ retval = 0; ++ break; ++ ++ default: ++ retval = -DWC_E_NOT_SUPPORTED; ++ break; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function prepares the core features descriptors and copies its ++ * raw representation into the buffer . ++ * ++ * The buffer structure is as follows: ++ * all_features_header (8 bytes) ++ * features_#1 (8 bytes + feature name string length) ++ * features_#2 (8 bytes + feature name string length) ++ * ..... ++ * features_#n - where n=the total count of feature descriptors ++ */ ++static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen) ++{ ++ cfi_feature_desc_header_t *prop_hdr = prop_descs; ++ cfi_feature_desc_header_t *prop; ++ cfi_all_features_header_t *all_props_hdr = &all_props_desc_header; ++ cfi_all_features_header_t *tmp; ++ uint8_t *tmpbuf = buf; ++ const uint8_t *pname = NULL; ++ int i, j, namelen = 0, totlen; ++ ++ /* Prepare and copy the core features into the buffer */ ++ CFI_INFO("%s:\n", __func__); ++ ++ tmp = (cfi_all_features_header_t *) tmpbuf; ++ *tmp = *all_props_hdr; ++ tmpbuf += CFI_ALL_FEATURES_HDR_LEN; ++ ++ j = sizeof(prop_descs) / sizeof(cfi_all_features_header_t); ++ for (i = 0; i < j; i++, prop_hdr++) { ++ pname = get_prop_name(prop_hdr->wFeatureID, &namelen); ++ prop = (cfi_feature_desc_header_t *) tmpbuf; ++ *prop = *prop_hdr; ++ ++ prop->bNameLen = namelen; ++ prop->wLength = ++ DWC_CONSTANT_CPU_TO_LE16(CFI_FEATURE_DESC_HDR_LEN + ++ namelen); ++ ++ tmpbuf += CFI_FEATURE_DESC_HDR_LEN; ++ dwc_memcpy(tmpbuf, pname, namelen); ++ tmpbuf += namelen; ++ } ++ ++ totlen = tmpbuf - buf; ++ ++ if (totlen > 0) { ++ tmp = (cfi_all_features_header_t *) buf; ++ tmp->wTotalLen = DWC_CONSTANT_CPU_TO_LE16(totlen); ++ } ++ ++ return totlen; ++} ++ ++/** ++ * This function releases all the dynamic memory in the CFI object. ++ */ ++static void cfi_release(cfiobject_t * cfiobj) ++{ ++ cfi_ep_t *cfiep; ++ dwc_list_link_t *tmp; ++ ++ CFI_INFO("%s\n", __func__); ++ ++ if (cfiobj->buf_in.buf) { ++ DWC_DMA_FREE(CFI_IN_BUF_LEN, cfiobj->buf_in.buf, ++ cfiobj->buf_in.addr); ++ cfiobj->buf_in.buf = NULL; ++ } ++ ++ if (cfiobj->buf_out.buf) { ++ DWC_DMA_FREE(CFI_OUT_BUF_LEN, cfiobj->buf_out.buf, ++ cfiobj->buf_out.addr); ++ cfiobj->buf_out.buf = NULL; ++ } ++ ++ /* Free the Buffer Setup values for each EP */ ++ //list_for_each_entry(cfiep, &cfiobj->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfiobj->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ cfi_free_ep_bs_dyn_data(cfiep); ++ } ++} ++ ++/** ++ * This function frees the dynamically allocated EP buffer setup data. ++ */ ++static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep) ++{ ++ if (cfiep->bm_sg) { ++ DWC_FREE(cfiep->bm_sg); ++ cfiep->bm_sg = NULL; ++ } ++ ++ if (cfiep->bm_align) { ++ DWC_FREE(cfiep->bm_align); ++ cfiep->bm_align = NULL; ++ } ++ ++ if (cfiep->bm_concat) { ++ if (NULL != cfiep->bm_concat->wTxBytes) { ++ DWC_FREE(cfiep->bm_concat->wTxBytes); ++ cfiep->bm_concat->wTxBytes = NULL; ++ } ++ DWC_FREE(cfiep->bm_concat); ++ cfiep->bm_concat = NULL; ++ } ++} ++ ++/** ++ * This function initializes the default values of the features ++ * for a specific endpoint and should be called only once when ++ * the EP is enabled first time. ++ */ ++static int cfi_ep_init_defaults(struct dwc_otg_pcd *pcd, cfi_ep_t * cfiep) ++{ ++ int retval = 0; ++ ++ cfiep->bm_sg = DWC_ALLOC(sizeof(ddma_sg_buffer_setup_t)); ++ if (NULL == cfiep->bm_sg) { ++ CFI_INFO("Failed to allocate memory for SG feature value\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); ++ ++ /* For the Concatenation feature's default value we do not allocate ++ * memory for the wTxBytes field - it will be done in the set_feature_value ++ * request handler. ++ */ ++ cfiep->bm_concat = DWC_ALLOC(sizeof(ddma_concat_buffer_setup_t)); ++ if (NULL == cfiep->bm_concat) { ++ CFI_INFO ++ ("Failed to allocate memory for CONCATENATION feature value\n"); ++ DWC_FREE(cfiep->bm_sg); ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t)); ++ ++ cfiep->bm_align = DWC_ALLOC(sizeof(ddma_align_buffer_setup_t)); ++ if (NULL == cfiep->bm_align) { ++ CFI_INFO ++ ("Failed to allocate memory for Alignment feature value\n"); ++ DWC_FREE(cfiep->bm_sg); ++ DWC_FREE(cfiep->bm_concat); ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_memset(cfiep->bm_align, 0, sizeof(ddma_align_buffer_setup_t)); ++ ++ return retval; ++} ++ ++/** ++ * The callback function that notifies the CFI on the activation of ++ * an endpoint in the PCD. The following steps are done in this function: ++ * ++ * Create a dynamically allocated cfi_ep_t object (a CFI wrapper to the PCD's ++ * active endpoint) ++ * Create MAX_DMA_DESCS_PER_EP count DMA Descriptors for the EP ++ * Set the Buffer Mode to standard ++ * Initialize the default values for all EP modes (SG, Circular, Concat, Align) ++ * Add the cfi_ep_t object to the list of active endpoints in the CFI object ++ */ ++static int cfi_ep_enable(struct cfiobject *cfi, struct dwc_otg_pcd *pcd, ++ struct dwc_otg_pcd_ep *ep) ++{ ++ cfi_ep_t *cfiep; ++ int retval = -DWC_E_NOT_SUPPORTED; ++ ++ CFI_INFO("%s: epname=%s; epnum=0x%02x\n", __func__, ++ "EP_" /*ep->ep.name */ , ep->desc->bEndpointAddress); ++ /* MAS - Check whether this endpoint already is in the list */ ++ cfiep = get_cfi_ep_by_pcd_ep(cfi, ep); ++ ++ if (NULL == cfiep) { ++ /* Allocate a cfi_ep_t object */ ++ cfiep = DWC_ALLOC(sizeof(cfi_ep_t)); ++ if (NULL == cfiep) { ++ CFI_INFO ++ ("Unable to allocate memory for in function %s\n", ++ __func__); ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_memset(cfiep, 0, sizeof(cfi_ep_t)); ++ ++ /* Save the dwc_otg_pcd_ep pointer in the cfiep object */ ++ cfiep->ep = ep; ++ ++ /* Allocate the DMA Descriptors chain of MAX_DMA_DESCS_PER_EP count */ ++ ep->dwc_ep.descs = ++ DWC_DMA_ALLOC(MAX_DMA_DESCS_PER_EP * ++ sizeof(dwc_otg_dma_desc_t), ++ &ep->dwc_ep.descs_dma_addr); ++ ++ if (NULL == ep->dwc_ep.descs) { ++ DWC_FREE(cfiep); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ DWC_LIST_INIT(&cfiep->lh); ++ ++ /* Set the buffer mode to BM_STANDARD. It will be modified ++ * when building descriptors for a specific buffer mode */ ++ ep->dwc_ep.buff_mode = BM_STANDARD; ++ ++ /* Create and initialize the default values for this EP's Buffer modes */ ++ if ((retval = cfi_ep_init_defaults(pcd, cfiep)) < 0) ++ return retval; ++ ++ /* Add the cfi_ep_t object to the CFI object's list of active endpoints */ ++ DWC_LIST_INSERT_TAIL(&cfi->active_eps, &cfiep->lh); ++ retval = 0; ++ } else { /* The sought EP already is in the list */ ++ CFI_INFO("%s: The sought EP already is in the list\n", ++ __func__); ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function is called when the data stage of a 3-stage Control Write request ++ * is complete. ++ * ++ */ ++static int cfi_ctrl_write_complete(struct cfiobject *cfi, ++ struct dwc_otg_pcd *pcd) ++{ ++ uint32_t addr, reg_value; ++ uint16_t wIndex, wValue; ++ uint8_t bRequest; ++ uint8_t *buf = cfi->buf_out.buf; ++ //struct usb_ctrlrequest *ctrl_req = &cfi->ctrl_req_saved; ++ struct cfi_usb_ctrlrequest *ctrl_req = &cfi->ctrl_req; ++ int retval = -DWC_E_NOT_SUPPORTED; ++ ++ CFI_INFO("%s\n", __func__); ++ ++ bRequest = ctrl_req->bRequest; ++ wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex); ++ wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue); ++ ++ /* ++ * Save the pointer to the data stage in the ctrl_req's field. ++ * The request should be already saved in the command stage by now. ++ */ ++ ctrl_req->data = cfi->buf_out.buf; ++ cfi->need_status_in_complete = 0; ++ cfi->need_gadget_att = 0; ++ ++ switch (bRequest) { ++ case VEN_CORE_WRITE_REGISTER: ++ /* The buffer contains raw data of the new value for the register */ ++ reg_value = *((uint32_t *) buf); ++ if (wValue == 0) { ++ addr = 0; ++ //addr = (uint32_t) pcd->otg_dev->os_dep.base; ++ addr += wIndex; ++ } else { ++ addr = (wValue << 16) | wIndex; ++ } ++ ++ //writel(reg_value, addr); ++ ++ retval = 0; ++ cfi->need_status_in_complete = 1; ++ break; ++ ++ case VEN_CORE_SET_FEATURE: ++ /* The buffer contains raw data of the new value of the feature */ ++ retval = cfi_set_feature_value(pcd); ++ if (retval < 0) ++ return retval; ++ ++ cfi->need_status_in_complete = 1; ++ break; ++ ++ default: ++ break; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function builds the DMA descriptors for the SG buffer mode. ++ */ ++static void cfi_build_sg_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, ++ dwc_otg_pcd_request_t * req) ++{ ++ struct dwc_otg_pcd_ep *ep = cfiep->ep; ++ ddma_sg_buffer_setup_t *sgval = cfiep->bm_sg; ++ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; ++ struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs; ++ dma_addr_t buff_addr = req->dma; ++ int i; ++ uint32_t txsize, off; ++ ++ txsize = sgval->wSize; ++ off = sgval->bOffset; ++ ++// CFI_INFO("%s: %s TXSIZE=0x%08x; OFFSET=0x%08x\n", ++// __func__, cfiep->ep->ep.name, txsize, off); ++ ++ for (i = 0; i < sgval->bCount; i++) { ++ desc->status.b.bs = BS_HOST_BUSY; ++ desc->buf = buff_addr; ++ desc->status.b.l = 0; ++ desc->status.b.ioc = 0; ++ desc->status.b.sp = 0; ++ desc->status.b.bytes = txsize; ++ desc->status.b.bs = BS_HOST_READY; ++ ++ /* Set the next address of the buffer */ ++ buff_addr += txsize + off; ++ desc_last = desc; ++ desc++; ++ } ++ ++ /* Set the last, ioc and sp bits on the Last DMA Descriptor */ ++ desc_last->status.b.l = 1; ++ desc_last->status.b.ioc = 1; ++ desc_last->status.b.sp = ep->dwc_ep.sent_zlp; ++ /* Save the last DMA descriptor pointer */ ++ cfiep->dma_desc_last = desc_last; ++ cfiep->desc_count = sgval->bCount; ++} ++ ++/** ++ * This function builds the DMA descriptors for the Concatenation buffer mode. ++ */ ++static void cfi_build_concat_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, ++ dwc_otg_pcd_request_t * req) ++{ ++ struct dwc_otg_pcd_ep *ep = cfiep->ep; ++ ddma_concat_buffer_setup_t *concatval = cfiep->bm_concat; ++ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; ++ struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs; ++ dma_addr_t buff_addr = req->dma; ++ int i; ++ uint16_t *txsize; ++ ++ txsize = concatval->wTxBytes; ++ ++ for (i = 0; i < concatval->hdr.bDescCount; i++) { ++ desc->buf = buff_addr; ++ desc->status.b.bs = BS_HOST_BUSY; ++ desc->status.b.l = 0; ++ desc->status.b.ioc = 0; ++ desc->status.b.sp = 0; ++ desc->status.b.bytes = *txsize; ++ desc->status.b.bs = BS_HOST_READY; ++ ++ txsize++; ++ /* Set the next address of the buffer */ ++ buff_addr += UGETW(ep->desc->wMaxPacketSize); ++ desc_last = desc; ++ desc++; ++ } ++ ++ /* Set the last, ioc and sp bits on the Last DMA Descriptor */ ++ desc_last->status.b.l = 1; ++ desc_last->status.b.ioc = 1; ++ desc_last->status.b.sp = ep->dwc_ep.sent_zlp; ++ cfiep->dma_desc_last = desc_last; ++ cfiep->desc_count = concatval->hdr.bDescCount; ++} ++ ++/** ++ * This function builds the DMA descriptors for the Circular buffer mode ++ */ ++static void cfi_build_circ_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, ++ dwc_otg_pcd_request_t * req) ++{ ++ /* @todo: MAS - add implementation when this feature needs to be tested */ ++} ++ ++/** ++ * This function builds the DMA descriptors for the Alignment buffer mode ++ */ ++static void cfi_build_align_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, ++ dwc_otg_pcd_request_t * req) ++{ ++ struct dwc_otg_pcd_ep *ep = cfiep->ep; ++ ddma_align_buffer_setup_t *alignval = cfiep->bm_align; ++ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; ++ dma_addr_t buff_addr = req->dma; ++ ++ desc->status.b.bs = BS_HOST_BUSY; ++ desc->status.b.l = 1; ++ desc->status.b.ioc = 1; ++ desc->status.b.sp = ep->dwc_ep.sent_zlp; ++ desc->status.b.bytes = req->length; ++ /* Adjust the buffer alignment */ ++ desc->buf = (buff_addr + alignval->bAlign); ++ desc->status.b.bs = BS_HOST_READY; ++ cfiep->dma_desc_last = desc; ++ cfiep->desc_count = 1; ++} ++ ++/** ++ * This function builds the DMA descriptors chain for different modes of the ++ * buffer setup of an endpoint. ++ */ ++static void cfi_build_descriptors(struct cfiobject *cfi, ++ struct dwc_otg_pcd *pcd, ++ struct dwc_otg_pcd_ep *ep, ++ dwc_otg_pcd_request_t * req) ++{ ++ cfi_ep_t *cfiep; ++ ++ /* Get the cfiep by the dwc_otg_pcd_ep */ ++ cfiep = get_cfi_ep_by_pcd_ep(cfi, ep); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Unable to find a matching active endpoint\n", ++ __func__); ++ return; ++ } ++ ++ cfiep->xfer_len = req->length; ++ ++ /* Iterate through all the DMA descriptors */ ++ switch (cfiep->ep->dwc_ep.buff_mode) { ++ case BM_SG: ++ cfi_build_sg_descs(cfi, cfiep, req); ++ break; ++ ++ case BM_CONCAT: ++ cfi_build_concat_descs(cfi, cfiep, req); ++ break; ++ ++ case BM_CIRCULAR: ++ cfi_build_circ_descs(cfi, cfiep, req); ++ break; ++ ++ case BM_ALIGN: ++ cfi_build_align_descs(cfi, cfiep, req); ++ break; ++ ++ default: ++ break; ++ } ++} ++ ++/** ++ * Allocate DMA buffer for different Buffer modes. ++ */ ++static void *cfi_ep_alloc_buf(struct cfiobject *cfi, struct dwc_otg_pcd *pcd, ++ struct dwc_otg_pcd_ep *ep, dma_addr_t * dma, ++ unsigned size, gfp_t flags) ++{ ++ return DWC_DMA_ALLOC(size, dma); ++} ++ ++/** ++ * This function initializes the CFI object. ++ */ ++int init_cfi(cfiobject_t * cfiobj) ++{ ++ CFI_INFO("%s\n", __func__); ++ ++ /* Allocate a buffer for IN XFERs */ ++ cfiobj->buf_in.buf = ++ DWC_DMA_ALLOC(CFI_IN_BUF_LEN, &cfiobj->buf_in.addr); ++ if (NULL == cfiobj->buf_in.buf) { ++ CFI_INFO("Unable to allocate buffer for INs\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Allocate a buffer for OUT XFERs */ ++ cfiobj->buf_out.buf = ++ DWC_DMA_ALLOC(CFI_OUT_BUF_LEN, &cfiobj->buf_out.addr); ++ if (NULL == cfiobj->buf_out.buf) { ++ CFI_INFO("Unable to allocate buffer for OUT\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Initialize the callback function pointers */ ++ cfiobj->ops.release = cfi_release; ++ cfiobj->ops.ep_enable = cfi_ep_enable; ++ cfiobj->ops.ctrl_write_complete = cfi_ctrl_write_complete; ++ cfiobj->ops.build_descriptors = cfi_build_descriptors; ++ cfiobj->ops.ep_alloc_buf = cfi_ep_alloc_buf; ++ ++ /* Initialize the list of active endpoints in the CFI object */ ++ DWC_LIST_INIT(&cfiobj->active_eps); ++ ++ return 0; ++} ++ ++/** ++ * This function reads the required feature's current value into the buffer ++ * ++ * @retval: Returns negative as error, or the data length of the feature ++ */ ++static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen, ++ struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *ctrl_req) ++{ ++ int retval = -DWC_E_NOT_SUPPORTED; ++ struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd); ++ uint16_t dfifo, rxfifo, txfifo; ++ ++ switch (ctrl_req->wIndex) { ++ /* Whether the DDMA is enabled or not */ ++ case FT_ID_DMA_MODE: ++ *buf = (coreif->dma_enable && coreif->dma_desc_enable) ? 1 : 0; ++ retval = 1; ++ break; ++ ++ case FT_ID_DMA_BUFFER_SETUP: ++ retval = cfi_ep_get_sg_val(buf, pcd, ctrl_req); ++ break; ++ ++ case FT_ID_DMA_BUFF_ALIGN: ++ retval = cfi_ep_get_align_val(buf, pcd, ctrl_req); ++ break; ++ ++ case FT_ID_DMA_CONCAT_SETUP: ++ retval = cfi_ep_get_concat_val(buf, pcd, ctrl_req); ++ break; ++ ++ case FT_ID_DMA_CIRCULAR: ++ CFI_INFO("GetFeature value (FT_ID_DMA_CIRCULAR)\n"); ++ break; ++ ++ case FT_ID_THRESHOLD_SETUP: ++ CFI_INFO("GetFeature value (FT_ID_THRESHOLD_SETUP)\n"); ++ break; ++ ++ case FT_ID_DFIFO_DEPTH: ++ dfifo = get_dfifo_size(coreif); ++ *((uint16_t *) buf) = dfifo; ++ retval = sizeof(uint16_t); ++ break; ++ ++ case FT_ID_TX_FIFO_DEPTH: ++ retval = get_txfifo_size(pcd, ctrl_req->wValue); ++ if (retval >= 0) { ++ txfifo = retval; ++ *((uint16_t *) buf) = txfifo; ++ retval = sizeof(uint16_t); ++ } ++ break; ++ ++ case FT_ID_RX_FIFO_DEPTH: ++ retval = get_rxfifo_size(coreif, ctrl_req->wValue); ++ if (retval >= 0) { ++ rxfifo = retval; ++ *((uint16_t *) buf) = rxfifo; ++ retval = sizeof(uint16_t); ++ } ++ break; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function resets the SG for the specified EP to its default value ++ */ ++static int cfi_reset_sg_val(cfi_ep_t * cfiep) ++{ ++ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); ++ return 0; ++} ++ ++/** ++ * This function resets the Alignment for the specified EP to its default value ++ */ ++static int cfi_reset_align_val(cfi_ep_t * cfiep) ++{ ++ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); ++ return 0; ++} ++ ++/** ++ * This function resets the Concatenation for the specified EP to its default value ++ * This function will also set the value of the wTxBytes field to NULL after ++ * freeing the memory previously allocated for this field. ++ */ ++static int cfi_reset_concat_val(cfi_ep_t * cfiep) ++{ ++ /* First we need to free the wTxBytes field */ ++ if (cfiep->bm_concat->wTxBytes) { ++ DWC_FREE(cfiep->bm_concat->wTxBytes); ++ cfiep->bm_concat->wTxBytes = NULL; ++ } ++ ++ dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t)); ++ return 0; ++} ++ ++/** ++ * This function resets all the buffer setups of the specified endpoint ++ */ ++static int cfi_ep_reset_all_setup_vals(cfi_ep_t * cfiep) ++{ ++ cfi_reset_sg_val(cfiep); ++ cfi_reset_align_val(cfiep); ++ cfi_reset_concat_val(cfiep); ++ return 0; ++} ++ ++static int cfi_handle_reset_fifo_val(struct dwc_otg_pcd *pcd, uint8_t ep_addr, ++ uint8_t rx_rst, uint8_t tx_rst) ++{ ++ int retval = -DWC_E_INVALID; ++ uint16_t tx_siz[15]; ++ uint16_t rx_siz = 0; ++ dwc_otg_pcd_ep_t *ep = NULL; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; ++ ++ if (rx_rst) { ++ rx_siz = params->dev_rx_fifo_size; ++ params->dev_rx_fifo_size = GET_CORE_IF(pcd)->init_rxfsiz; ++ } ++ ++ if (tx_rst) { ++ if (ep_addr == 0) { ++ int i; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ tx_siz[i] = ++ core_if->core_params->dev_tx_fifo_size[i]; ++ core_if->core_params->dev_tx_fifo_size[i] = ++ core_if->init_txfsiz[i]; ++ } ++ } else { ++ ++ ep = get_ep_by_addr(pcd, ep_addr); ++ ++ if (NULL == ep) { ++ CFI_INFO ++ ("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, ep_addr); ++ return -DWC_E_INVALID; ++ } ++ ++ tx_siz[0] = ++ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - ++ 1]; ++ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = ++ GET_CORE_IF(pcd)->init_txfsiz[ep-> ++ dwc_ep.tx_fifo_num - ++ 1]; ++ } ++ } ++ ++ if (resize_fifos(GET_CORE_IF(pcd))) { ++ retval = 0; ++ } else { ++ CFI_INFO ++ ("%s: Error resetting the feature Reset All(FIFO size)\n", ++ __func__); ++ if (rx_rst) { ++ params->dev_rx_fifo_size = rx_siz; ++ } ++ ++ if (tx_rst) { ++ if (ep_addr == 0) { ++ int i; ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; ++ i++) { ++ core_if-> ++ core_params->dev_tx_fifo_size[i] = ++ tx_siz[i]; ++ } ++ } else { ++ params->dev_tx_fifo_size[ep-> ++ dwc_ep.tx_fifo_num - ++ 1] = tx_siz[0]; ++ } ++ } ++ retval = -DWC_E_INVALID; ++ } ++ return retval; ++} ++ ++static int cfi_handle_reset_all(struct dwc_otg_pcd *pcd, uint8_t addr) ++{ ++ int retval = 0; ++ cfi_ep_t *cfiep; ++ cfiobject_t *cfi = pcd->cfi; ++ dwc_list_link_t *tmp; ++ ++ retval = cfi_handle_reset_fifo_val(pcd, addr, 1, 1); ++ if (retval < 0) { ++ return retval; ++ } ++ ++ /* If the EP address is known then reset the features for only that EP */ ++ if (addr) { ++ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Error getting the EP address 0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ retval = cfi_ep_reset_all_setup_vals(cfiep); ++ cfiep->ep->dwc_ep.buff_mode = BM_STANDARD; ++ } ++ /* Otherwise (wValue == 0), reset all features of all EP's */ ++ else { ++ /* Traverse all the active EP's and reset the feature(s) value(s) */ ++ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ retval = cfi_ep_reset_all_setup_vals(cfiep); ++ cfiep->ep->dwc_ep.buff_mode = BM_STANDARD; ++ if (retval < 0) { ++ CFI_INFO ++ ("%s: Error resetting the feature Reset All\n", ++ __func__); ++ return retval; ++ } ++ } ++ } ++ return retval; ++} ++ ++static int cfi_handle_reset_dma_buff_setup(struct dwc_otg_pcd *pcd, ++ uint8_t addr) ++{ ++ int retval = 0; ++ cfi_ep_t *cfiep; ++ cfiobject_t *cfi = pcd->cfi; ++ dwc_list_link_t *tmp; ++ ++ /* If the EP address is known then reset the features for only that EP */ ++ if (addr) { ++ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Error getting the EP address 0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ retval = cfi_reset_sg_val(cfiep); ++ } ++ /* Otherwise (wValue == 0), reset all features of all EP's */ ++ else { ++ /* Traverse all the active EP's and reset the feature(s) value(s) */ ++ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ retval = cfi_reset_sg_val(cfiep); ++ if (retval < 0) { ++ CFI_INFO ++ ("%s: Error resetting the feature Buffer Setup\n", ++ __func__); ++ return retval; ++ } ++ } ++ } ++ return retval; ++} ++ ++static int cfi_handle_reset_concat_val(struct dwc_otg_pcd *pcd, uint8_t addr) ++{ ++ int retval = 0; ++ cfi_ep_t *cfiep; ++ cfiobject_t *cfi = pcd->cfi; ++ dwc_list_link_t *tmp; ++ ++ /* If the EP address is known then reset the features for only that EP */ ++ if (addr) { ++ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Error getting the EP address 0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ retval = cfi_reset_concat_val(cfiep); ++ } ++ /* Otherwise (wValue == 0), reset all features of all EP's */ ++ else { ++ /* Traverse all the active EP's and reset the feature(s) value(s) */ ++ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ retval = cfi_reset_concat_val(cfiep); ++ if (retval < 0) { ++ CFI_INFO ++ ("%s: Error resetting the feature Concatenation Value\n", ++ __func__); ++ return retval; ++ } ++ } ++ } ++ return retval; ++} ++ ++static int cfi_handle_reset_align_val(struct dwc_otg_pcd *pcd, uint8_t addr) ++{ ++ int retval = 0; ++ cfi_ep_t *cfiep; ++ cfiobject_t *cfi = pcd->cfi; ++ dwc_list_link_t *tmp; ++ ++ /* If the EP address is known then reset the features for only that EP */ ++ if (addr) { ++ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == cfiep) { ++ CFI_INFO("%s: Error getting the EP address 0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ retval = cfi_reset_align_val(cfiep); ++ } ++ /* Otherwise (wValue == 0), reset all features of all EP's */ ++ else { ++ /* Traverse all the active EP's and reset the feature(s) value(s) */ ++ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ retval = cfi_reset_align_val(cfiep); ++ if (retval < 0) { ++ CFI_INFO ++ ("%s: Error resetting the feature Aliignment Value\n", ++ __func__); ++ return retval; ++ } ++ } ++ } ++ return retval; ++ ++} ++ ++static int cfi_preproc_reset(struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req) ++{ ++ int retval = 0; ++ ++ switch (req->wIndex) { ++ case 0: ++ /* Reset all features */ ++ retval = cfi_handle_reset_all(pcd, req->wValue & 0xff); ++ break; ++ ++ case FT_ID_DMA_BUFFER_SETUP: ++ /* Reset the SG buffer setup */ ++ retval = ++ cfi_handle_reset_dma_buff_setup(pcd, req->wValue & 0xff); ++ break; ++ ++ case FT_ID_DMA_CONCAT_SETUP: ++ /* Reset the Concatenation buffer setup */ ++ retval = cfi_handle_reset_concat_val(pcd, req->wValue & 0xff); ++ break; ++ ++ case FT_ID_DMA_BUFF_ALIGN: ++ /* Reset the Alignment buffer setup */ ++ retval = cfi_handle_reset_align_val(pcd, req->wValue & 0xff); ++ break; ++ ++ case FT_ID_TX_FIFO_DEPTH: ++ retval = ++ cfi_handle_reset_fifo_val(pcd, req->wValue & 0xff, 0, 1); ++ pcd->cfi->need_gadget_att = 0; ++ break; ++ ++ case FT_ID_RX_FIFO_DEPTH: ++ retval = cfi_handle_reset_fifo_val(pcd, 0, 1, 0); ++ pcd->cfi->need_gadget_att = 0; ++ break; ++ default: ++ break; ++ } ++ return retval; ++} ++ ++/** ++ * This function sets a new value for the SG buffer setup. ++ */ ++static int cfi_ep_set_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd) ++{ ++ uint8_t inaddr, outaddr; ++ cfi_ep_t *epin, *epout; ++ ddma_sg_buffer_setup_t *psgval; ++ uint32_t desccount, size; ++ ++ CFI_INFO("%s\n", __func__); ++ ++ psgval = (ddma_sg_buffer_setup_t *) buf; ++ desccount = (uint32_t) psgval->bCount; ++ size = (uint32_t) psgval->wSize; ++ ++ /* Check the DMA descriptor count */ ++ if ((desccount > MAX_DMA_DESCS_PER_EP) || (desccount == 0)) { ++ CFI_INFO ++ ("%s: The count of DMA Descriptors should be between 1 and %d\n", ++ __func__, MAX_DMA_DESCS_PER_EP); ++ return -DWC_E_INVALID; ++ } ++ ++ /* Check the DMA descriptor count */ ++ ++ if (size == 0) { ++ ++ CFI_INFO("%s: The transfer size should be at least 1 byte\n", ++ __func__); ++ ++ return -DWC_E_INVALID; ++ ++ } ++ ++ inaddr = psgval->bInEndpointAddress; ++ outaddr = psgval->bOutEndpointAddress; ++ ++ epin = get_cfi_ep_by_addr(pcd->cfi, inaddr); ++ epout = get_cfi_ep_by_addr(pcd->cfi, outaddr); ++ ++ if (NULL == epin || NULL == epout) { ++ CFI_INFO ++ ("%s: Unable to get the endpoints inaddr=0x%02x outaddr=0x%02x\n", ++ __func__, inaddr, outaddr); ++ return -DWC_E_INVALID; ++ } ++ ++ epin->ep->dwc_ep.buff_mode = BM_SG; ++ dwc_memcpy(epin->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t)); ++ ++ epout->ep->dwc_ep.buff_mode = BM_SG; ++ dwc_memcpy(epout->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t)); ++ ++ return 0; ++} ++ ++/** ++ * This function sets a new value for the buffer Alignment setup. ++ */ ++static int cfi_ep_set_alignment_val(uint8_t * buf, struct dwc_otg_pcd *pcd) ++{ ++ cfi_ep_t *ep; ++ uint8_t addr; ++ ddma_align_buffer_setup_t *palignval; ++ ++ palignval = (ddma_align_buffer_setup_t *) buf; ++ addr = palignval->bEndpointAddress; ++ ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ ++ ep->ep->dwc_ep.buff_mode = BM_ALIGN; ++ dwc_memcpy(ep->bm_align, palignval, sizeof(ddma_align_buffer_setup_t)); ++ ++ return 0; ++} ++ ++/** ++ * This function sets a new value for the Concatenation buffer setup. ++ */ ++static int cfi_ep_set_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd) ++{ ++ uint8_t addr; ++ cfi_ep_t *ep; ++ struct _ddma_concat_buffer_setup_hdr *pConcatValHdr; ++ uint16_t *pVals; ++ uint32_t desccount; ++ int i; ++ uint16_t mps; ++ ++ pConcatValHdr = (struct _ddma_concat_buffer_setup_hdr *)buf; ++ desccount = (uint32_t) pConcatValHdr->bDescCount; ++ pVals = (uint16_t *) (buf + BS_CONCAT_VAL_HDR_LEN); ++ ++ /* Check the DMA descriptor count */ ++ if (desccount > MAX_DMA_DESCS_PER_EP) { ++ CFI_INFO("%s: Maximum DMA Descriptor count should be %d\n", ++ __func__, MAX_DMA_DESCS_PER_EP); ++ return -DWC_E_INVALID; ++ } ++ ++ addr = pConcatValHdr->bEndpointAddress; ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, addr); ++ return -DWC_E_INVALID; ++ } ++ ++ mps = UGETW(ep->ep->desc->wMaxPacketSize); ++ ++#if 0 ++ for (i = 0; i < desccount; i++) { ++ CFI_INFO("%s: wTxSize[%d]=0x%04x\n", __func__, i, pVals[i]); ++ } ++ CFI_INFO("%s: epname=%s; mps=%d\n", __func__, ep->ep->ep.name, mps); ++#endif ++ ++ /* Check the wTxSizes to be less than or equal to the mps */ ++ for (i = 0; i < desccount; i++) { ++ if (pVals[i] > mps) { ++ CFI_INFO ++ ("%s: ERROR - the wTxSize[%d] should be <= MPS (wTxSize=%d)\n", ++ __func__, i, pVals[i]); ++ return -DWC_E_INVALID; ++ } ++ } ++ ++ ep->ep->dwc_ep.buff_mode = BM_CONCAT; ++ dwc_memcpy(ep->bm_concat, pConcatValHdr, BS_CONCAT_VAL_HDR_LEN); ++ ++ /* Free the previously allocated storage for the wTxBytes */ ++ if (ep->bm_concat->wTxBytes) { ++ DWC_FREE(ep->bm_concat->wTxBytes); ++ } ++ ++ /* Allocate a new storage for the wTxBytes field */ ++ ep->bm_concat->wTxBytes = ++ DWC_ALLOC(sizeof(uint16_t) * pConcatValHdr->bDescCount); ++ if (NULL == ep->bm_concat->wTxBytes) { ++ CFI_INFO("%s: Unable to allocate memory\n", __func__); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Copy the new values into the wTxBytes filed */ ++ dwc_memcpy(ep->bm_concat->wTxBytes, buf + BS_CONCAT_VAL_HDR_LEN, ++ sizeof(uint16_t) * pConcatValHdr->bDescCount); ++ ++ return 0; ++} ++ ++/** ++ * This function calculates the total of all FIFO sizes ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return The total of data FIFO sizes. ++ * ++ */ ++static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_params_t *params = core_if->core_params; ++ uint16_t dfifo_total = 0; ++ int i; ++ ++ /* The shared RxFIFO size */ ++ dfifo_total = ++ params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size; ++ ++ /* Add up each TxFIFO size to the total */ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ dfifo_total += params->dev_tx_fifo_size[i]; ++ } ++ ++ return dfifo_total; ++} ++ ++/** ++ * This function returns Rx FIFO size ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return The total of data FIFO sizes. ++ * ++ */ ++static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue) ++{ ++ switch (wValue >> 8) { ++ case 0: ++ return (core_if->pwron_rxfsiz < ++ 32768) ? core_if->pwron_rxfsiz : 32768; ++ break; ++ case 1: ++ return core_if->core_params->dev_rx_fifo_size; ++ break; ++ default: ++ return -DWC_E_INVALID; ++ break; ++ } ++} ++ ++/** ++ * This function returns Tx FIFO size for IN EP ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return The total of data FIFO sizes. ++ * ++ */ ++static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ ++ ep = get_ep_by_addr(pcd, wValue & 0xff); ++ ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, wValue & 0xff); ++ return -DWC_E_INVALID; ++ } ++ ++ if (!ep->dwc_ep.is_in) { ++ CFI_INFO ++ ("%s: No Tx FIFO assingned to the Out endpoint addr=0x%02x\n", ++ __func__, wValue & 0xff); ++ return -DWC_E_INVALID; ++ } ++ ++ switch (wValue >> 8) { ++ case 0: ++ return (GET_CORE_IF(pcd)->pwron_txfsiz ++ [ep->dwc_ep.tx_fifo_num - 1] < ++ 768) ? GET_CORE_IF(pcd)->pwron_txfsiz[ep-> ++ dwc_ep.tx_fifo_num ++ - 1] : 32768; ++ break; ++ case 1: ++ return GET_CORE_IF(pcd)->core_params-> ++ dev_tx_fifo_size[ep->dwc_ep.num - 1]; ++ break; ++ default: ++ return -DWC_E_INVALID; ++ break; ++ } ++} ++ ++/** ++ * This function checks if the submitted combination of ++ * device mode FIFO sizes is possible or not. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return 1 if possible, 0 otherwise. ++ * ++ */ ++static uint8_t check_fifo_sizes(dwc_otg_core_if_t * core_if) ++{ ++ uint16_t dfifo_actual = 0; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ uint16_t start_addr = 0; ++ int i; ++ ++ dfifo_actual = ++ params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ dfifo_actual += params->dev_tx_fifo_size[i]; ++ } ++ ++ if (dfifo_actual > core_if->total_fifo_size) { ++ return 0; ++ } ++ ++ if (params->dev_rx_fifo_size > 32768 || params->dev_rx_fifo_size < 16) ++ return 0; ++ ++ if (params->dev_nperio_tx_fifo_size > 32768 ++ || params->dev_nperio_tx_fifo_size < 16) ++ return 0; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ ++ if (params->dev_tx_fifo_size[i] > 768 ++ || params->dev_tx_fifo_size[i] < 4) ++ return 0; ++ } ++ ++ if (params->dev_rx_fifo_size > core_if->pwron_rxfsiz) ++ return 0; ++ start_addr = params->dev_rx_fifo_size; ++ ++ if (params->dev_nperio_tx_fifo_size > core_if->pwron_gnptxfsiz) ++ return 0; ++ start_addr += params->dev_nperio_tx_fifo_size; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ ++ if (params->dev_tx_fifo_size[i] > core_if->pwron_txfsiz[i]) ++ return 0; ++ start_addr += params->dev_tx_fifo_size[i]; ++ } ++ ++ return 1; ++} ++ ++/** ++ * This function resizes Device mode FIFOs ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ * @return 1 if successful, 0 otherwise ++ * ++ */ ++static uint8_t resize_fifos(dwc_otg_core_if_t * core_if) ++{ ++ int i = 0; ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ uint32_t rx_fifo_size; ++ fifosize_data_t nptxfifosize; ++ fifosize_data_t txfifosize[15]; ++ ++ uint32_t rx_fsz_bak; ++ uint32_t nptxfsz_bak; ++ uint32_t txfsz_bak[15]; ++ ++ uint16_t start_address; ++ uint8_t retval = 1; ++ ++ if (!check_fifo_sizes(core_if)) { ++ return 0; ++ } ++ ++ /* Configure data FIFO sizes */ ++ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { ++ rx_fsz_bak = DWC_READ_REG32(&global_regs->grxfsiz); ++ rx_fifo_size = params->dev_rx_fifo_size; ++ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size); ++ ++ /* ++ * Tx FIFOs These FIFOs are numbered from 1 to 15. ++ * Indexes of the FIFO size module parameters in the ++ * dev_tx_fifo_size array and the FIFO size registers in ++ * the dtxfsiz array run from 0 to 14. ++ */ ++ ++ /* Non-periodic Tx FIFO */ ++ nptxfsz_bak = DWC_READ_REG32(&global_regs->gnptxfsiz); ++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; ++ start_address = params->dev_rx_fifo_size; ++ nptxfifosize.b.startaddr = start_address; ++ ++ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32); ++ ++ start_address += nptxfifosize.b.depth; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ txfsz_bak[i] = DWC_READ_REG32(&global_regs->dtxfsiz[i]); ++ ++ txfifosize[i].b.depth = params->dev_tx_fifo_size[i]; ++ txfifosize[i].b.startaddr = start_address; ++ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], ++ txfifosize[i].d32); ++ ++ start_address += txfifosize[i].b.depth; ++ } ++ ++ /** Check if register values are set correctly */ ++ if (rx_fifo_size != DWC_READ_REG32(&global_regs->grxfsiz)) { ++ retval = 0; ++ } ++ ++ if (nptxfifosize.d32 != DWC_READ_REG32(&global_regs->gnptxfsiz)) { ++ retval = 0; ++ } ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ if (txfifosize[i].d32 != ++ DWC_READ_REG32(&global_regs->dtxfsiz[i])) { ++ retval = 0; ++ } ++ } ++ ++ /** If register values are not set correctly, reset old values */ ++ if (retval == 0) { ++ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fsz_bak); ++ ++ /* Non-periodic Tx FIFO */ ++ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfsz_bak); ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], ++ txfsz_bak[i]); ++ } ++ } ++ } else { ++ return 0; ++ } ++ ++ /* Flush the FIFOs */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */ ++ dwc_otg_flush_rx_fifo(core_if); ++ ++ return retval; ++} ++ ++/** ++ * This function sets a new value for the buffer Alignment setup. ++ */ ++static int cfi_ep_set_tx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd) ++{ ++ int retval; ++ uint32_t fsiz; ++ uint16_t size; ++ uint16_t ep_addr; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; ++ tx_fifo_size_setup_t *ptxfifoval; ++ ++ ptxfifoval = (tx_fifo_size_setup_t *) buf; ++ ep_addr = ptxfifoval->bEndpointAddress; ++ size = ptxfifoval->wDepth; ++ ++ ep = get_ep_by_addr(pcd, ep_addr); ++ ++ CFI_INFO ++ ("%s: Set Tx FIFO size: endpoint addr=0x%02x, depth=%d, FIFO Num=%d\n", ++ __func__, ep_addr, size, ep->dwc_ep.tx_fifo_num); ++ ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", ++ __func__, ep_addr); ++ return -DWC_E_INVALID; ++ } ++ ++ fsiz = params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1]; ++ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = size; ++ ++ if (resize_fifos(GET_CORE_IF(pcd))) { ++ retval = 0; ++ } else { ++ CFI_INFO ++ ("%s: Error setting the feature Tx FIFO Size for EP%d\n", ++ __func__, ep_addr); ++ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = fsiz; ++ retval = -DWC_E_INVALID; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function sets a new value for the buffer Alignment setup. ++ */ ++static int cfi_set_rx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd) ++{ ++ int retval; ++ uint32_t fsiz; ++ uint16_t size; ++ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; ++ rx_fifo_size_setup_t *prxfifoval; ++ ++ prxfifoval = (rx_fifo_size_setup_t *) buf; ++ size = prxfifoval->wDepth; ++ ++ fsiz = params->dev_rx_fifo_size; ++ params->dev_rx_fifo_size = size; ++ ++ if (resize_fifos(GET_CORE_IF(pcd))) { ++ retval = 0; ++ } else { ++ CFI_INFO("%s: Error setting the feature Rx FIFO Size\n", ++ __func__); ++ params->dev_rx_fifo_size = fsiz; ++ retval = -DWC_E_INVALID; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function reads the SG of an EP's buffer setup into the buffer buf ++ */ ++static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req) ++{ ++ int retval = -DWC_E_INVALID; ++ uint8_t addr; ++ cfi_ep_t *ep; ++ ++ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ ++ addr = req->wValue & 0xFF; ++ if (addr == 0) /* The address should be non-zero */ ++ return retval; ++ ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", ++ __func__, addr); ++ return retval; ++ } ++ ++ dwc_memcpy(buf, ep->bm_sg, BS_SG_VAL_DESC_LEN); ++ retval = BS_SG_VAL_DESC_LEN; ++ return retval; ++} ++ ++/** ++ * This function reads the Concatenation value of an EP's buffer mode into ++ * the buffer buf ++ */ ++static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req) ++{ ++ int retval = -DWC_E_INVALID; ++ uint8_t addr; ++ cfi_ep_t *ep; ++ uint8_t desc_count; ++ ++ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ ++ addr = req->wValue & 0xFF; ++ if (addr == 0) /* The address should be non-zero */ ++ return retval; ++ ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", ++ __func__, addr); ++ return retval; ++ } ++ ++ /* Copy the header to the buffer */ ++ dwc_memcpy(buf, ep->bm_concat, BS_CONCAT_VAL_HDR_LEN); ++ /* Advance the buffer pointer by the header size */ ++ buf += BS_CONCAT_VAL_HDR_LEN; ++ ++ desc_count = ep->bm_concat->hdr.bDescCount; ++ /* Copy alll the wTxBytes to the buffer */ ++ dwc_memcpy(buf, ep->bm_concat->wTxBytes, sizeof(uid16_t) * desc_count); ++ ++ retval = BS_CONCAT_VAL_HDR_LEN + sizeof(uid16_t) * desc_count; ++ return retval; ++} ++ ++/** ++ * This function reads the buffer Alignment value of an EP's buffer mode into ++ * the buffer buf ++ * ++ * @return The total number of bytes copied to the buffer or negative error code. ++ */ ++static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd, ++ struct cfi_usb_ctrlrequest *req) ++{ ++ int retval = -DWC_E_INVALID; ++ uint8_t addr; ++ cfi_ep_t *ep; ++ ++ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ ++ addr = req->wValue & 0xFF; ++ if (addr == 0) /* The address should be non-zero */ ++ return retval; ++ ++ ep = get_cfi_ep_by_addr(pcd->cfi, addr); ++ if (NULL == ep) { ++ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", ++ __func__, addr); ++ return retval; ++ } ++ ++ dwc_memcpy(buf, ep->bm_align, BS_ALIGN_VAL_HDR_LEN); ++ retval = BS_ALIGN_VAL_HDR_LEN; ++ ++ return retval; ++} ++ ++/** ++ * This function sets a new value for the specified feature ++ * ++ * @param pcd A pointer to the PCD object ++ * ++ * @return 0 if successful, negative error code otherwise to stall the DCE. ++ */ ++static int cfi_set_feature_value(struct dwc_otg_pcd *pcd) ++{ ++ int retval = -DWC_E_NOT_SUPPORTED; ++ uint16_t wIndex, wValue; ++ uint8_t bRequest; ++ struct dwc_otg_core_if *coreif; ++ cfiobject_t *cfi = pcd->cfi; ++ struct cfi_usb_ctrlrequest *ctrl_req; ++ uint8_t *buf; ++ ctrl_req = &cfi->ctrl_req; ++ ++ buf = pcd->cfi->ctrl_req.data; ++ ++ coreif = GET_CORE_IF(pcd); ++ bRequest = ctrl_req->bRequest; ++ wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex); ++ wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue); ++ ++ /* See which feature is to be modified */ ++ switch (wIndex) { ++ case FT_ID_DMA_BUFFER_SETUP: ++ /* Modify the feature */ ++ if ((retval = cfi_ep_set_sg_val(buf, pcd)) < 0) ++ return retval; ++ ++ /* And send this request to the gadget */ ++ cfi->need_gadget_att = 1; ++ break; ++ ++ case FT_ID_DMA_BUFF_ALIGN: ++ if ((retval = cfi_ep_set_alignment_val(buf, pcd)) < 0) ++ return retval; ++ cfi->need_gadget_att = 1; ++ break; ++ ++ case FT_ID_DMA_CONCAT_SETUP: ++ /* Modify the feature */ ++ if ((retval = cfi_ep_set_concat_val(buf, pcd)) < 0) ++ return retval; ++ cfi->need_gadget_att = 1; ++ break; ++ ++ case FT_ID_DMA_CIRCULAR: ++ CFI_INFO("FT_ID_DMA_CIRCULAR\n"); ++ break; ++ ++ case FT_ID_THRESHOLD_SETUP: ++ CFI_INFO("FT_ID_THRESHOLD_SETUP\n"); ++ break; ++ ++ case FT_ID_DFIFO_DEPTH: ++ CFI_INFO("FT_ID_DFIFO_DEPTH\n"); ++ break; ++ ++ case FT_ID_TX_FIFO_DEPTH: ++ CFI_INFO("FT_ID_TX_FIFO_DEPTH\n"); ++ if ((retval = cfi_ep_set_tx_fifo_val(buf, pcd)) < 0) ++ return retval; ++ cfi->need_gadget_att = 0; ++ break; ++ ++ case FT_ID_RX_FIFO_DEPTH: ++ CFI_INFO("FT_ID_RX_FIFO_DEPTH\n"); ++ if ((retval = cfi_set_rx_fifo_val(buf, pcd)) < 0) ++ return retval; ++ cfi->need_gadget_att = 0; ++ break; ++ } ++ ++ return retval; ++} ++ ++#endif //DWC_UTE_CFI +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_cfi.h +@@ -0,0 +1,320 @@ ++/* ========================================================================== ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_OTG_CFI_H__) ++#define __DWC_OTG_CFI_H__ ++ ++#include "dwc_otg_pcd.h" ++#include "dwc_cfi_common.h" ++ ++/** ++ * @file ++ * This file contains the CFI related OTG PCD specific common constants, ++ * interfaces(functions and macros) and data structures.The CFI Protocol is an ++ * optional interface for internal testing purposes that a DUT may implement to ++ * support testing of configurable features. ++ * ++ */ ++ ++struct dwc_otg_pcd; ++struct dwc_otg_pcd_ep; ++ ++/** OTG CFI Features (properties) ID constants */ ++/** This is a request for all Core Features */ ++#define FT_ID_DMA_MODE 0x0001 ++#define FT_ID_DMA_BUFFER_SETUP 0x0002 ++#define FT_ID_DMA_BUFF_ALIGN 0x0003 ++#define FT_ID_DMA_CONCAT_SETUP 0x0004 ++#define FT_ID_DMA_CIRCULAR 0x0005 ++#define FT_ID_THRESHOLD_SETUP 0x0006 ++#define FT_ID_DFIFO_DEPTH 0x0007 ++#define FT_ID_TX_FIFO_DEPTH 0x0008 ++#define FT_ID_RX_FIFO_DEPTH 0x0009 ++ ++/**********************************************************/ ++#define CFI_INFO_DEF ++ ++#ifdef CFI_INFO_DEF ++#define CFI_INFO(fmt...) DWC_PRINTF("CFI: " fmt); ++#else ++#define CFI_INFO(fmt...) ++#endif ++ ++#define min(x,y) ({ \ ++ x < y ? x : y; }) ++ ++#define max(x,y) ({ \ ++ x > y ? x : y; }) ++ ++/** ++ * Descriptor DMA SG Buffer setup structure (SG buffer). This structure is ++ * also used for setting up a buffer for Circular DDMA. ++ */ ++struct _ddma_sg_buffer_setup { ++#define BS_SG_VAL_DESC_LEN 6 ++ /* The OUT EP address */ ++ uint8_t bOutEndpointAddress; ++ /* The IN EP address */ ++ uint8_t bInEndpointAddress; ++ /* Number of bytes to put between transfer segments (must be DWORD boundaries) */ ++ uint8_t bOffset; ++ /* The number of transfer segments (a DMA descriptors per each segment) */ ++ uint8_t bCount; ++ /* Size (in byte) of each transfer segment */ ++ uint16_t wSize; ++} __attribute__ ((packed)); ++typedef struct _ddma_sg_buffer_setup ddma_sg_buffer_setup_t; ++ ++/** Descriptor DMA Concatenation Buffer setup structure */ ++struct _ddma_concat_buffer_setup_hdr { ++#define BS_CONCAT_VAL_HDR_LEN 4 ++ /* The endpoint for which the buffer is to be set up */ ++ uint8_t bEndpointAddress; ++ /* The count of descriptors to be used */ ++ uint8_t bDescCount; ++ /* The total size of the transfer */ ++ uint16_t wSize; ++} __attribute__ ((packed)); ++typedef struct _ddma_concat_buffer_setup_hdr ddma_concat_buffer_setup_hdr_t; ++ ++/** Descriptor DMA Concatenation Buffer setup structure */ ++struct _ddma_concat_buffer_setup { ++ /* The SG header */ ++ ddma_concat_buffer_setup_hdr_t hdr; ++ ++ /* The XFER sizes pointer (allocated dynamically) */ ++ uint16_t *wTxBytes; ++} __attribute__ ((packed)); ++typedef struct _ddma_concat_buffer_setup ddma_concat_buffer_setup_t; ++ ++/** Descriptor DMA Alignment Buffer setup structure */ ++struct _ddma_align_buffer_setup { ++#define BS_ALIGN_VAL_HDR_LEN 2 ++ uint8_t bEndpointAddress; ++ uint8_t bAlign; ++} __attribute__ ((packed)); ++typedef struct _ddma_align_buffer_setup ddma_align_buffer_setup_t; ++ ++/** Transmit FIFO Size setup structure */ ++struct _tx_fifo_size_setup { ++ uint8_t bEndpointAddress; ++ uint16_t wDepth; ++} __attribute__ ((packed)); ++typedef struct _tx_fifo_size_setup tx_fifo_size_setup_t; ++ ++/** Transmit FIFO Size setup structure */ ++struct _rx_fifo_size_setup { ++ uint16_t wDepth; ++} __attribute__ ((packed)); ++typedef struct _rx_fifo_size_setup rx_fifo_size_setup_t; ++ ++/** ++ * struct cfi_usb_ctrlrequest - the CFI implementation of the struct usb_ctrlrequest ++ * This structure encapsulates the standard usb_ctrlrequest and adds a pointer ++ * to the data returned in the data stage of a 3-stage Control Write requests. ++ */ ++struct cfi_usb_ctrlrequest { ++ uint8_t bRequestType; ++ uint8_t bRequest; ++ uint16_t wValue; ++ uint16_t wIndex; ++ uint16_t wLength; ++ uint8_t *data; ++} UPACKED; ++ ++/*---------------------------------------------------------------------------*/ ++ ++/** ++ * The CFI wrapper of the enabled and activated dwc_otg_pcd_ep structures. ++ * This structure is used to store the buffer setup data for any ++ * enabled endpoint in the PCD. ++ */ ++struct cfi_ep { ++ /* Entry for the list container */ ++ dwc_list_link_t lh; ++ /* Pointer to the active PCD endpoint structure */ ++ struct dwc_otg_pcd_ep *ep; ++ /* The last descriptor in the chain of DMA descriptors of the endpoint */ ++ struct dwc_otg_dma_desc *dma_desc_last; ++ /* The SG feature value */ ++ ddma_sg_buffer_setup_t *bm_sg; ++ /* The Circular feature value */ ++ ddma_sg_buffer_setup_t *bm_circ; ++ /* The Concatenation feature value */ ++ ddma_concat_buffer_setup_t *bm_concat; ++ /* The Alignment feature value */ ++ ddma_align_buffer_setup_t *bm_align; ++ /* XFER length */ ++ uint32_t xfer_len; ++ /* ++ * Count of DMA descriptors currently used. ++ * The total should not exceed the MAX_DMA_DESCS_PER_EP value ++ * defined in the dwc_otg_cil.h ++ */ ++ uint32_t desc_count; ++}; ++typedef struct cfi_ep cfi_ep_t; ++ ++typedef struct cfi_dma_buff { ++#define CFI_IN_BUF_LEN 1024 ++#define CFI_OUT_BUF_LEN 1024 ++ dma_addr_t addr; ++ uint8_t *buf; ++} cfi_dma_buff_t; ++ ++struct cfiobject; ++ ++/** ++ * This is the interface for the CFI operations. ++ * ++ * @param ep_enable Called when any endpoint is enabled and activated. ++ * @param release Called when the CFI object is released and it needs to correctly ++ * deallocate the dynamic memory ++ * @param ctrl_write_complete Called when the data stage of the request is complete ++ */ ++typedef struct cfi_ops { ++ int (*ep_enable) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd, ++ struct dwc_otg_pcd_ep * ep); ++ void *(*ep_alloc_buf) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd, ++ struct dwc_otg_pcd_ep * ep, dma_addr_t * dma, ++ unsigned size, gfp_t flags); ++ void (*release) (struct cfiobject * cfi); ++ int (*ctrl_write_complete) (struct cfiobject * cfi, ++ struct dwc_otg_pcd * pcd); ++ void (*build_descriptors) (struct cfiobject * cfi, ++ struct dwc_otg_pcd * pcd, ++ struct dwc_otg_pcd_ep * ep, ++ dwc_otg_pcd_request_t * req); ++} cfi_ops_t; ++ ++struct cfiobject { ++ cfi_ops_t ops; ++ struct dwc_otg_pcd *pcd; ++ struct usb_gadget *gadget; ++ ++ /* Buffers used to send/receive CFI-related request data */ ++ cfi_dma_buff_t buf_in; ++ cfi_dma_buff_t buf_out; ++ ++ /* CFI specific Control request wrapper */ ++ struct cfi_usb_ctrlrequest ctrl_req; ++ ++ /* The list of active EP's in the PCD of type cfi_ep_t */ ++ dwc_list_link_t active_eps; ++ ++ /* This flag shall control the propagation of a specific request ++ * to the gadget's processing routines. ++ * 0 - no gadget handling ++ * 1 - the gadget needs to know about this request (w/o completing a status ++ * phase - just return a 0 to the _setup callback) ++ */ ++ uint8_t need_gadget_att; ++ ++ /* Flag indicating whether the status IN phase needs to be ++ * completed by the PCD ++ */ ++ uint8_t need_status_in_complete; ++}; ++typedef struct cfiobject cfiobject_t; ++ ++#define DUMP_MSG ++ ++#if defined(DUMP_MSG) ++static inline void dump_msg(const u8 * buf, unsigned int length) ++{ ++ unsigned int start, num, i; ++ char line[52], *p; ++ ++ if (length >= 512) ++ return; ++ ++ start = 0; ++ while (length > 0) { ++ num = min(length, 16u); ++ p = line; ++ for (i = 0; i < num; ++i) { ++ if (i == 8) ++ *p++ = ' '; ++ DWC_SPRINTF(p, " %02x", buf[i]); ++ p += 3; ++ } ++ *p = 0; ++ DWC_DEBUG("%6x: %s\n", start, line); ++ buf += num; ++ start += num; ++ length -= num; ++ } ++} ++#else ++static inline void dump_msg(const u8 * buf, unsigned int length) ++{ ++} ++#endif ++ ++/** ++ * This function returns a pointer to cfi_ep_t object with the addr address. ++ */ ++static inline struct cfi_ep *get_cfi_ep_by_addr(struct cfiobject *cfi, ++ uint8_t addr) ++{ ++ struct cfi_ep *pcfiep; ++ dwc_list_link_t *tmp; ++ ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ ++ if (pcfiep->ep->desc->bEndpointAddress == addr) { ++ return pcfiep; ++ } ++ } ++ ++ return NULL; ++} ++ ++/** ++ * This function returns a pointer to cfi_ep_t object that matches ++ * the dwc_otg_pcd_ep object. ++ */ ++static inline struct cfi_ep *get_cfi_ep_by_pcd_ep(struct cfiobject *cfi, ++ struct dwc_otg_pcd_ep *ep) ++{ ++ struct cfi_ep *pcfiep = NULL; ++ dwc_list_link_t *tmp; ++ ++ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { ++ pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); ++ if (pcfiep->ep == ep) { ++ return pcfiep; ++ } ++ } ++ return NULL; ++} ++ ++int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl); ++ ++#endif /* (__DWC_OTG_CFI_H__) */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_cil.c +@@ -0,0 +1,7141 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $ ++ * $Revision: #191 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * The Core Interface Layer provides basic services for accessing and ++ * managing the DWC_otg hardware. These services are used by both the ++ * Host Controller Driver and the Peripheral Controller Driver. ++ * ++ * The CIL manages the memory map for the core so that the HCD and PCD ++ * don't have to do this separately. It also handles basic tasks like ++ * reading/writing the registers and data FIFOs in the controller. ++ * Some of the data access functions provide encapsulation of several ++ * operations required to perform a task, such as writing multiple ++ * registers to start a transfer. Finally, the CIL performs basic ++ * services that are not specific to either the host or device modes ++ * of operation. These services include management of the OTG Host ++ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A ++ * Diagnostic API is also provided to allow testing of the controller ++ * hardware. ++ * ++ * The Core Interface Layer has the following requirements: ++ * - Provides basic controller operations. ++ * - Minimal use of OS services. ++ * - The OS services used will be abstracted by using inline functions ++ * or macros. ++ * ++ */ ++ ++#include "dwc_os.h" ++#include "dwc_otg_regs.h" ++#include "dwc_otg_cil.h" ++ ++static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if); ++ ++/** ++ * This function is called to initialize the DWC_otg CSR data ++ * structures. The register addresses in the device and host ++ * structures are initialized from the base address supplied by the ++ * caller. The calling function must make the OS calls to get the ++ * base address of the DWC_otg controller registers. The core_params ++ * argument holds the parameters that specify how the core should be ++ * configured. ++ * ++ * @param reg_base_addr Base address of DWC_otg core registers ++ * ++ */ ++dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * reg_base_addr) ++{ ++ dwc_otg_core_if_t *core_if = 0; ++ dwc_otg_dev_if_t *dev_if = 0; ++ dwc_otg_host_if_t *host_if = 0; ++ uint8_t *reg_base = (uint8_t *) reg_base_addr; ++ int i = 0; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, reg_base_addr); ++ ++ core_if = DWC_ALLOC(sizeof(dwc_otg_core_if_t)); ++ ++ if (core_if == NULL) { ++ DWC_DEBUGPL(DBG_CIL, ++ "Allocation of dwc_otg_core_if_t failed\n"); ++ return 0; ++ } ++ core_if->core_global_regs = (dwc_otg_core_global_regs_t *) reg_base; ++ ++ /* ++ * Allocate the Device Mode structures. ++ */ ++ dev_if = DWC_ALLOC(sizeof(dwc_otg_dev_if_t)); ++ ++ if (dev_if == NULL) { ++ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n"); ++ DWC_FREE(core_if); ++ return 0; ++ } ++ ++ dev_if->dev_global_regs = ++ (dwc_otg_device_global_regs_t *) (reg_base + ++ DWC_DEV_GLOBAL_REG_OFFSET); ++ ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *) ++ (reg_base + DWC_DEV_IN_EP_REG_OFFSET + ++ (i * DWC_EP_REG_OFFSET)); ++ ++ dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *) ++ (reg_base + DWC_DEV_OUT_EP_REG_OFFSET + ++ (i * DWC_EP_REG_OFFSET)); ++ DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n", ++ i, &dev_if->in_ep_regs[i]->diepctl); ++ DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n", ++ i, &dev_if->out_ep_regs[i]->doepctl); ++ } ++ ++ dev_if->speed = 0; // unknown ++ ++ core_if->dev_if = dev_if; ++ ++ /* ++ * Allocate the Host Mode structures. ++ */ ++ host_if = DWC_ALLOC(sizeof(dwc_otg_host_if_t)); ++ ++ if (host_if == NULL) { ++ DWC_DEBUGPL(DBG_CIL, ++ "Allocation of dwc_otg_host_if_t failed\n"); ++ DWC_FREE(dev_if); ++ DWC_FREE(core_if); ++ return 0; ++ } ++ ++ host_if->host_global_regs = (dwc_otg_host_global_regs_t *) ++ (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET); ++ ++ host_if->hprt0 = ++ (uint32_t *) (reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET); ++ ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ host_if->hc_regs[i] = (dwc_otg_hc_regs_t *) ++ (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET + ++ (i * DWC_OTG_CHAN_REGS_OFFSET)); ++ DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n", ++ i, &host_if->hc_regs[i]->hcchar); ++ } ++ ++ host_if->num_host_channels = MAX_EPS_CHANNELS; ++ core_if->host_if = host_if; ++ ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ core_if->data_fifo[i] = ++ (uint32_t *) (reg_base + DWC_OTG_DATA_FIFO_OFFSET + ++ (i * DWC_OTG_DATA_FIFO_SIZE)); ++ DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08lx\n", ++ i, (unsigned long)core_if->data_fifo[i]); ++ } ++ ++ core_if->pcgcctl = (uint32_t *) (reg_base + DWC_OTG_PCGCCTL_OFFSET); ++ ++ /* Initiate lx_state to L3 disconnected state */ ++ core_if->lx_state = DWC_OTG_L3; ++ /* ++ * Store the contents of the hardware configuration registers here for ++ * easy access later. ++ */ ++ core_if->hwcfg1.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg1); ++ core_if->hwcfg2.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2); ++ core_if->hwcfg3.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg3); ++ core_if->hwcfg4.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4); ++ ++ /* Force host mode to get HPTXFSIZ exact power on value */ ++ { ++ gusbcfg_data_t gusbcfg = {.d32 = 0 }; ++ gusbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ gusbcfg.b.force_host_mode = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32); ++ dwc_mdelay(100); ++ core_if->hptxfsiz.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz); ++ gusbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ gusbcfg.b.force_host_mode = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32); ++ dwc_mdelay(100); ++ } ++ ++ DWC_DEBUGPL(DBG_CILV, "hwcfg1=%08x\n", core_if->hwcfg1.d32); ++ DWC_DEBUGPL(DBG_CILV, "hwcfg2=%08x\n", core_if->hwcfg2.d32); ++ DWC_DEBUGPL(DBG_CILV, "hwcfg3=%08x\n", core_if->hwcfg3.d32); ++ DWC_DEBUGPL(DBG_CILV, "hwcfg4=%08x\n", core_if->hwcfg4.d32); ++ ++ core_if->hcfg.d32 = ++ DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); ++ core_if->dcfg.d32 = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ ++ DWC_DEBUGPL(DBG_CILV, "hcfg=%08x\n", core_if->hcfg.d32); ++ DWC_DEBUGPL(DBG_CILV, "dcfg=%08x\n", core_if->dcfg.d32); ++ ++ DWC_DEBUGPL(DBG_CILV, "op_mode=%0x\n", core_if->hwcfg2.b.op_mode); ++ DWC_DEBUGPL(DBG_CILV, "arch=%0x\n", core_if->hwcfg2.b.architecture); ++ DWC_DEBUGPL(DBG_CILV, "num_dev_ep=%d\n", core_if->hwcfg2.b.num_dev_ep); ++ DWC_DEBUGPL(DBG_CILV, "num_host_chan=%d\n", ++ core_if->hwcfg2.b.num_host_chan); ++ DWC_DEBUGPL(DBG_CILV, "nonperio_tx_q_depth=0x%0x\n", ++ core_if->hwcfg2.b.nonperio_tx_q_depth); ++ DWC_DEBUGPL(DBG_CILV, "host_perio_tx_q_depth=0x%0x\n", ++ core_if->hwcfg2.b.host_perio_tx_q_depth); ++ DWC_DEBUGPL(DBG_CILV, "dev_token_q_depth=0x%0x\n", ++ core_if->hwcfg2.b.dev_token_q_depth); ++ ++ DWC_DEBUGPL(DBG_CILV, "Total FIFO SZ=%d\n", ++ core_if->hwcfg3.b.dfifo_depth); ++ DWC_DEBUGPL(DBG_CILV, "xfer_size_cntr_width=%0x\n", ++ core_if->hwcfg3.b.xfer_size_cntr_width); ++ ++ /* ++ * Set the SRP sucess bit for FS-I2c ++ */ ++ core_if->srp_success = 0; ++ core_if->srp_timer_started = 0; ++ ++ /* ++ * Create new workqueue and init works ++ */ ++ core_if->wq_otg = DWC_WORKQ_ALLOC("dwc_otg"); ++ if (core_if->wq_otg == 0) { ++ DWC_WARN("DWC_WORKQ_ALLOC failed\n"); ++ DWC_FREE(host_if); ++ DWC_FREE(dev_if); ++ DWC_FREE(core_if); ++ return 0; ++ } ++ ++ core_if->snpsid = DWC_READ_REG32(&core_if->core_global_regs->gsnpsid); ++ ++ DWC_PRINTF("Core Release: %x.%x%x%x\n", ++ (core_if->snpsid >> 12 & 0xF), ++ (core_if->snpsid >> 8 & 0xF), ++ (core_if->snpsid >> 4 & 0xF), (core_if->snpsid & 0xF)); ++ ++ core_if->wkp_timer = DWC_TIMER_ALLOC("Wake Up Timer", ++ w_wakeup_detected, core_if); ++ if (core_if->wkp_timer == 0) { ++ DWC_WARN("DWC_TIMER_ALLOC failed\n"); ++ DWC_FREE(host_if); ++ DWC_FREE(dev_if); ++ DWC_WORKQ_FREE(core_if->wq_otg); ++ DWC_FREE(core_if); ++ return 0; ++ } ++ ++ if (dwc_otg_setup_params(core_if)) { ++ DWC_WARN("Error while setting core params\n"); ++ } ++ ++ core_if->hibernation_suspend = 0; ++ ++ /** ADP initialization */ ++ dwc_otg_adp_init(core_if); ++ ++ return core_if; ++} ++ ++/** ++ * This function frees the structures allocated by dwc_otg_cil_init(). ++ * ++ * @param core_if The core interface pointer returned from ++ * dwc_otg_cil_init(). ++ * ++ */ ++void dwc_otg_cil_remove(dwc_otg_core_if_t * core_if) ++{ ++ dctl_data_t dctl = {.d32 = 0 }; ++ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if); ++ ++ /* Disable all interrupts */ ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 1, 0); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0); ++ ++ dctl.b.sftdiscon = 1; ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, ++ dctl.d32); ++ } ++ ++ if (core_if->wq_otg) { ++ DWC_WORKQ_WAIT_WORK_DONE(core_if->wq_otg, 500); ++ DWC_WORKQ_FREE(core_if->wq_otg); ++ } ++ if (core_if->dev_if) { ++ DWC_FREE(core_if->dev_if); ++ } ++ if (core_if->host_if) { ++ DWC_FREE(core_if->host_if); ++ } ++ ++ /** Remove ADP Stuff */ ++ dwc_otg_adp_remove(core_if); ++ if (core_if->core_params) { ++ DWC_FREE(core_if->core_params); ++ } ++ if (core_if->wkp_timer) { ++ DWC_TIMER_FREE(core_if->wkp_timer); ++ } ++ if (core_if->srp_timer) { ++ DWC_TIMER_FREE(core_if->srp_timer); ++ } ++ DWC_FREE(core_if); ++} ++ ++/** ++ * This function enables the controller's Global Interrupt in the AHB Config ++ * register. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ gahbcfg_data_t ahbcfg = {.d32 = 0 }; ++ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32); ++} ++ ++/** ++ * This function disables the controller's Global Interrupt in the AHB Config ++ * register. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ gahbcfg_data_t ahbcfg = {.d32 = 0 }; ++ ahbcfg.b.glblintrmsk = 1; /* Disable interrupts */ ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0); ++} ++ ++/** ++ * This function initializes the commmon interrupts, used in both ++ * device and host modes. ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ * ++ */ ++static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ /* Clear any pending OTG Interrupts */ ++ DWC_WRITE_REG32(&global_regs->gotgint, 0xFFFFFFFF); ++ ++ /* Clear any pending interrupts */ ++ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* ++ * Enable the interrupts in the GINTMSK. ++ */ ++ intr_mask.b.modemismatch = 1; ++ intr_mask.b.otgintr = 1; ++ ++ if (!core_if->dma_enable) { ++ intr_mask.b.rxstsqlvl = 1; ++ } ++ ++ intr_mask.b.conidstschng = 1; ++ intr_mask.b.wkupintr = 1; ++ intr_mask.b.disconnect = 0; ++ intr_mask.b.usbsuspend = 1; ++ intr_mask.b.sessreqintr = 1; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (core_if->core_params->lpm_enable) { ++ intr_mask.b.lpmtranrcvd = 1; ++ } ++#endif ++ DWC_WRITE_REG32(&global_regs->gintmsk, intr_mask.d32); ++} ++ ++/* ++ * The restore operation is modified to support Synopsys Emulated Powerdown and ++ * Hibernation. This function is for exiting from Device mode hibernation by ++ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup. ++ * @param core_if Programming view of DWC_otg controller. ++ * @param rem_wakeup - indicates whether resume is initiated by Device or Host. ++ * @param reset - indicates whether resume is initiated by Reset. ++ */ ++int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, ++ int rem_wakeup, int reset) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ ++ int timeout = 2000; ++ ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "%s called\n", __FUNCTION__); ++ /* Switch-on voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Assert Restore signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.restore = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ if (rem_wakeup) { ++ dwc_udelay(70); ++ } ++ ++ /* Deassert Reset core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Mask interrupts from gpwrdn */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.connect_det_msk = 1; ++ gpwrdn.b.srp_det_msk = 1; ++ gpwrdn.b.disconn_det_msk = 1; ++ gpwrdn.b.rst_det_msk = 1; ++ gpwrdn.b.lnstchng_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Indicates that we are going out from hibernation */ ++ core_if->hibernation_suspend = 0; ++ ++ /* ++ * Set Restore Essential Regs bit in PCGCCTL register, restore_mode = 1 ++ * indicates restore from remote_wakeup ++ */ ++ restore_essential_regs(core_if, rem_wakeup, 0); ++ ++ /* ++ * Wait a little for seeing new value of variable hibernation_suspend if ++ * Restore done interrupt received before polling ++ */ ++ dwc_udelay(10); ++ ++ if (core_if->hibernation_suspend == 0) { ++ /* ++ * Wait For Restore_done Interrupt. This mechanism of polling the ++ * interrupt is introduced to avoid any possible race conditions ++ */ ++ do { ++ gintsts_data_t gintsts; ++ gintsts.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ if (gintsts.b.restoredone) { ++ gintsts.d32 = 0; ++ gintsts.b.restoredone = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs-> ++ gintsts, gintsts.d32); ++ DWC_PRINTF("Restore Done Interrupt seen\n"); ++ break; ++ } ++ dwc_udelay(10); ++ } while (--timeout); ++ if (!timeout) { ++ DWC_PRINTF("Restore Done interrupt wasn't generated here\n"); ++ } ++ } ++ /* Clear all pending interupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* De-assert Restore */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.restore = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ if (!rem_wakeup) { ++ pcgcctl.d32 = 0; ++ pcgcctl.b.rstpdwnmodule = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ } ++ ++ /* Restore GUSBCFG and DCFG */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, ++ core_if->gr_backup->gusbcfg_local); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, ++ core_if->dr_backup->dcfg); ++ ++ /* De-assert Wakeup Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ if (!rem_wakeup) { ++ /* Set Device programming done bit */ ++ dctl.b.pwronprgdone = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } else { ++ /* Start Remote Wakeup Signaling */ ++ dctl.d32 = core_if->dr_backup->dctl; ++ dctl.b.rmtwkupsig = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); ++ } ++ ++ dwc_mdelay(2); ++ /* Clear all pending interupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Restore global registers */ ++ dwc_otg_restore_global_regs(core_if); ++ /* Restore device global registers */ ++ dwc_otg_restore_dev_regs(core_if, rem_wakeup); ++ ++ if (rem_wakeup) { ++ dwc_mdelay(7); ++ dctl.d32 = 0; ++ dctl.b.rmtwkupsig = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0); ++ } ++ ++ core_if->hibernation_suspend = 0; ++ /* The core will be in ON STATE */ ++ core_if->lx_state = DWC_OTG_L0; ++ DWC_PRINTF("Hibernation recovery completes here\n"); ++ ++ return 1; ++} ++ ++/* ++ * The restore operation is modified to support Synopsys Emulated Powerdown and ++ * Hibernation. This function is for exiting from Host mode hibernation by ++ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup. ++ * @param core_if Programming view of DWC_otg controller. ++ * @param rem_wakeup - indicates whether resume is initiated by Device or Host. ++ * @param reset - indicates whether resume is initiated by Reset. ++ */ ++int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if, ++ int rem_wakeup, int reset) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ ++ int timeout = 2000; ++ ++ DWC_DEBUGPL(DBG_HCD, "%s called\n", __FUNCTION__); ++ /* Switch-on voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Assert Restore signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.restore = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ if (!rem_wakeup) { ++ dwc_udelay(50); ++ } ++ ++ /* Deassert Reset core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.connect_det_msk = 1; ++ gpwrdn.b.srp_det_msk = 1; ++ gpwrdn.b.disconn_det_msk = 1; ++ gpwrdn.b.rst_det_msk = 1; ++ gpwrdn.b.lnstchng_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Indicates that we are going out from hibernation */ ++ core_if->hibernation_suspend = 0; ++ ++ /* Set Restore Essential Regs bit in PCGCCTL register */ ++ restore_essential_regs(core_if, rem_wakeup, 1); ++ ++ /* Wait a little for seeing new value of variable hibernation_suspend if ++ * Restore done interrupt received before polling */ ++ dwc_udelay(10); ++ ++ if (core_if->hibernation_suspend == 0) { ++ /* Wait For Restore_done Interrupt. This mechanism of polling the ++ * interrupt is introduced to avoid any possible race conditions ++ */ ++ do { ++ gintsts_data_t gintsts; ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ if (gintsts.b.restoredone) { ++ gintsts.d32 = 0; ++ gintsts.b.restoredone = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ DWC_DEBUGPL(DBG_HCD,"Restore Done Interrupt seen\n"); ++ break; ++ } ++ dwc_udelay(10); ++ } while (--timeout); ++ if (!timeout) { ++ DWC_WARN("Restore Done interrupt wasn't generated\n"); ++ } ++ } ++ ++ /* Set the flag's value to 0 again after receiving restore done interrupt */ ++ core_if->hibernation_suspend = 0; ++ ++ /* This step is not described in functional spec but if not wait for this ++ * delay, mismatch interrupts occurred because just after restore core is ++ * in Device mode(gintsts.curmode == 0) */ ++ dwc_mdelay(100); ++ ++ /* Clear all pending interrupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* De-assert Restore */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.restore = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Restore GUSBCFG and HCFG */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, ++ core_if->gr_backup->gusbcfg_local); ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, ++ core_if->hr_backup->hcfg_local); ++ ++ /* De-assert Wakeup Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Start the Resume operation by programming HPRT0 */ ++ hprt0.d32 = core_if->hr_backup->hprt0_local; ++ hprt0.b.prtpwr = 1; ++ hprt0.b.prtena = 0; ++ hprt0.b.prtsusp = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ DWC_PRINTF("Resume Starts Now\n"); ++ if (!reset) { // Indicates it is Resume Operation ++ hprt0.d32 = core_if->hr_backup->hprt0_local; ++ hprt0.b.prtres = 1; ++ hprt0.b.prtpwr = 1; ++ hprt0.b.prtena = 0; ++ hprt0.b.prtsusp = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ if (!rem_wakeup) ++ hprt0.b.prtres = 0; ++ /* Wait for Resume time and then program HPRT again */ ++ dwc_mdelay(100); ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ } else { // Indicates it is Reset Operation ++ hprt0.d32 = core_if->hr_backup->hprt0_local; ++ hprt0.b.prtrst = 1; ++ hprt0.b.prtpwr = 1; ++ hprt0.b.prtena = 0; ++ hprt0.b.prtsusp = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ /* Wait for Reset time and then program HPRT again */ ++ dwc_mdelay(60); ++ hprt0.b.prtrst = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ } ++ /* Clear all interrupt status */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtconndet = 1; ++ hprt0.b.prtenchng = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* Clear all pending interupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Restore global registers */ ++ dwc_otg_restore_global_regs(core_if); ++ /* Restore host global registers */ ++ dwc_otg_restore_host_regs(core_if, reset); ++ ++ /* The core will be in ON STATE */ ++ core_if->lx_state = DWC_OTG_L0; ++ DWC_PRINTF("Hibernation recovery is complete here\n"); ++ return 0; ++} ++ ++/** Saves some register values into system memory. */ ++int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if) ++{ ++ struct dwc_otg_global_regs_backup *gr; ++ int i; ++ ++ gr = core_if->gr_backup; ++ if (!gr) { ++ gr = DWC_ALLOC(sizeof(*gr)); ++ if (!gr) { ++ return -DWC_E_NO_MEMORY; ++ } ++ core_if->gr_backup = gr; ++ } ++ ++ gr->gotgctl_local = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); ++ gr->gahbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg); ++ gr->gusbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ gr->grxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); ++ gr->gnptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz); ++ gr->hptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ gr->glpmcfg_local = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++#endif ++ gr->gi2cctl_local = DWC_READ_REG32(&core_if->core_global_regs->gi2cctl); ++ gr->pcgcctl_local = DWC_READ_REG32(core_if->pcgcctl); ++ gr->gdfifocfg_local = ++ DWC_READ_REG32(&core_if->core_global_regs->gdfifocfg); ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ gr->dtxfsiz_local[i] = ++ DWC_READ_REG32(&(core_if->core_global_regs->dtxfsiz[i])); ++ } ++ ++ DWC_DEBUGPL(DBG_ANY, "===========Backing Global registers==========\n"); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gotgctl = %08x\n", gr->gotgctl_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk = %08x\n", gr->gintmsk_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gahbcfg = %08x\n", gr->gahbcfg_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gusbcfg = %08x\n", gr->gusbcfg_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up grxfsiz = %08x\n", gr->grxfsiz_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gnptxfsiz = %08x\n", ++ gr->gnptxfsiz_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up hptxfsiz = %08x\n", ++ gr->hptxfsiz_local); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ DWC_DEBUGPL(DBG_ANY, "Backed up glpmcfg = %08x\n", gr->glpmcfg_local); ++#endif ++ DWC_DEBUGPL(DBG_ANY, "Backed up gi2cctl = %08x\n", gr->gi2cctl_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up pcgcctl = %08x\n", gr->pcgcctl_local); ++ DWC_DEBUGPL(DBG_ANY,"Backed up gdfifocfg = %08x\n",gr->gdfifocfg_local); ++ ++ return 0; ++} ++ ++/** Saves GINTMSK register before setting the msk bits. */ ++int dwc_otg_save_gintmsk_reg(dwc_otg_core_if_t * core_if) ++{ ++ struct dwc_otg_global_regs_backup *gr; ++ ++ gr = core_if->gr_backup; ++ if (!gr) { ++ gr = DWC_ALLOC(sizeof(*gr)); ++ if (!gr) { ++ return -DWC_E_NO_MEMORY; ++ } ++ core_if->gr_backup = gr; ++ } ++ ++ gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); ++ ++ DWC_DEBUGPL(DBG_ANY,"=============Backing GINTMSK registers============\n"); ++ DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk = %08x\n", gr->gintmsk_local); ++ ++ return 0; ++} ++ ++int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if) ++{ ++ struct dwc_otg_dev_regs_backup *dr; ++ int i; ++ ++ dr = core_if->dr_backup; ++ if (!dr) { ++ dr = DWC_ALLOC(sizeof(*dr)); ++ if (!dr) { ++ return -DWC_E_NO_MEMORY; ++ } ++ core_if->dr_backup = dr; ++ } ++ ++ dr->dcfg = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ dr->dctl = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); ++ dr->daintmsk = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); ++ dr->diepmsk = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->diepmsk); ++ dr->doepmsk = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->doepmsk); ++ ++ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { ++ dr->diepctl[i] = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl); ++ dr->dieptsiz[i] = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz); ++ dr->diepdma[i] = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma); ++ } ++ ++ DWC_DEBUGPL(DBG_ANY, ++ "=============Backing Host registers==============\n"); ++ DWC_DEBUGPL(DBG_ANY, "Backed up dcfg = %08x\n", dr->dcfg); ++ DWC_DEBUGPL(DBG_ANY, "Backed up dctl = %08x\n", dr->dctl); ++ DWC_DEBUGPL(DBG_ANY, "Backed up daintmsk = %08x\n", ++ dr->daintmsk); ++ DWC_DEBUGPL(DBG_ANY, "Backed up diepmsk = %08x\n", dr->diepmsk); ++ DWC_DEBUGPL(DBG_ANY, "Backed up doepmsk = %08x\n", dr->doepmsk); ++ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { ++ DWC_DEBUGPL(DBG_ANY, "Backed up diepctl[%d] = %08x\n", i, ++ dr->diepctl[i]); ++ DWC_DEBUGPL(DBG_ANY, "Backed up dieptsiz[%d] = %08x\n", ++ i, dr->dieptsiz[i]); ++ DWC_DEBUGPL(DBG_ANY, "Backed up diepdma[%d] = %08x\n", i, ++ dr->diepdma[i]); ++ } ++ ++ return 0; ++} ++ ++int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if) ++{ ++ struct dwc_otg_host_regs_backup *hr; ++ int i; ++ ++ hr = core_if->hr_backup; ++ if (!hr) { ++ hr = DWC_ALLOC(sizeof(*hr)); ++ if (!hr) { ++ return -DWC_E_NO_MEMORY; ++ } ++ core_if->hr_backup = hr; ++ } ++ ++ hr->hcfg_local = ++ DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); ++ hr->haintmsk_local = ++ DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk); ++ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { ++ hr->hcintmsk_local[i] = ++ DWC_READ_REG32(&core_if->host_if->hc_regs[i]->hcintmsk); ++ } ++ hr->hprt0_local = DWC_READ_REG32(core_if->host_if->hprt0); ++ hr->hfir_local = ++ DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); ++ ++ DWC_DEBUGPL(DBG_ANY, ++ "=============Backing Host registers===============\n"); ++ DWC_DEBUGPL(DBG_ANY, "Backed up hcfg = %08x\n", ++ hr->hcfg_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up haintmsk = %08x\n", hr->haintmsk_local); ++ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { ++ DWC_DEBUGPL(DBG_ANY, "Backed up hcintmsk[%02d]=%08x\n", i, ++ hr->hcintmsk_local[i]); ++ } ++ DWC_DEBUGPL(DBG_ANY, "Backed up hprt0 = %08x\n", ++ hr->hprt0_local); ++ DWC_DEBUGPL(DBG_ANY, "Backed up hfir = %08x\n", ++ hr->hfir_local); ++ ++ return 0; ++} ++ ++int dwc_otg_restore_global_regs(dwc_otg_core_if_t *core_if) ++{ ++ struct dwc_otg_global_regs_backup *gr; ++ int i; ++ ++ gr = core_if->gr_backup; ++ if (!gr) { ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, gr->gotgctl_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gr->gintmsk_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gr->gusbcfg_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gr->gahbcfg_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, gr->grxfsiz_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz, ++ gr->gnptxfsiz_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->hptxfsiz, ++ gr->hptxfsiz_local); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gdfifocfg, ++ gr->gdfifocfg_local); ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ DWC_WRITE_REG32(&core_if->core_global_regs->dtxfsiz[i], ++ gr->dtxfsiz_local[i]); ++ } ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ DWC_WRITE_REG32(core_if->host_if->hprt0, 0x0000100A); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, ++ (gr->gahbcfg_local)); ++ return 0; ++} ++ ++int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if, int rem_wakeup) ++{ ++ struct dwc_otg_dev_regs_backup *dr; ++ int i; ++ ++ dr = core_if->dr_backup; ++ ++ if (!dr) { ++ return -DWC_E_INVALID; ++ } ++ ++ if (!rem_wakeup) { ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, ++ dr->dctl); ++ } ++ ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, dr->daintmsk); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, dr->diepmsk); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, dr->doepmsk); ++ ++ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz, dr->dieptsiz[i]); ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma, dr->diepdma[i]); ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl, dr->diepctl[i]); ++ } ++ ++ return 0; ++} ++ ++int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset) ++{ ++ struct dwc_otg_host_regs_backup *hr; ++ int i; ++ hr = core_if->hr_backup; ++ ++ if (!hr) { ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hr->hcfg_local); ++ //if (!reset) ++ //{ ++ // DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hr->hfir_local); ++ //} ++ ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk, ++ hr->haintmsk_local); ++ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { ++ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk, ++ hr->hcintmsk_local[i]); ++ } ++ ++ return 0; ++} ++ ++int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if) ++{ ++ struct dwc_otg_global_regs_backup *gr; ++ ++ gr = core_if->gr_backup; ++ ++ /* Restore values for LPM and I2C */ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, gr->glpmcfg_local); ++#endif ++ DWC_WRITE_REG32(&core_if->core_global_regs->gi2cctl, gr->gi2cctl_local); ++ ++ return 0; ++} ++ ++int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode, int is_host) ++{ ++ struct dwc_otg_global_regs_backup *gr; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ gahbcfg_data_t gahbcfg = {.d32 = 0 }; ++ gusbcfg_data_t gusbcfg = {.d32 = 0 }; ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ ++ /* Restore LPM and I2C registers */ ++ restore_lpm_i2c_regs(core_if); ++ ++ /* Set PCGCCTL to 0 */ ++ DWC_WRITE_REG32(core_if->pcgcctl, 0x00000000); ++ ++ gr = core_if->gr_backup; ++ /* Load restore values for [31:14] bits */ ++ DWC_WRITE_REG32(core_if->pcgcctl, ++ ((gr->pcgcctl_local & 0xffffc000) | 0x00020000)); ++ ++ /* Umnask global Interrupt in GAHBCFG and restore it */ ++ gahbcfg.d32 = gr->gahbcfg_local; ++ gahbcfg.b.glblintrmsk = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32); ++ ++ /* Clear all pending interupts */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Unmask restore done interrupt */ ++ gintmsk.b.restoredone = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32); ++ ++ /* Restore GUSBCFG and HCFG/DCFG */ ++ gusbcfg.d32 = core_if->gr_backup->gusbcfg_local; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32); ++ ++ if (is_host) { ++ hcfg_data_t hcfg = {.d32 = 0 }; ++ hcfg.d32 = core_if->hr_backup->hcfg_local; ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, ++ hcfg.d32); ++ ++ /* Load restore values for [31:14] bits */ ++ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; ++ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; ++ ++ if (rmode) ++ pcgcctl.b.restoremode = 1; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ dwc_udelay(10); ++ ++ /* Load restore values for [31:14] bits and set EssRegRestored bit */ ++ pcgcctl.d32 = gr->pcgcctl_local | 0xffffc000; ++ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; ++ pcgcctl.b.ess_reg_restored = 1; ++ if (rmode) ++ pcgcctl.b.restoremode = 1; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ } else { ++ dcfg_data_t dcfg = {.d32 = 0 }; ++ dcfg.d32 = core_if->dr_backup->dcfg; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ /* Load restore values for [31:14] bits */ ++ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; ++ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; ++ if (!rmode) { ++ pcgcctl.d32 |= 0x208; ++ } ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ dwc_udelay(10); ++ ++ /* Load restore values for [31:14] bits */ ++ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; ++ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; ++ pcgcctl.b.ess_reg_restored = 1; ++ if (!rmode) ++ pcgcctl.d32 |= 0x208; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ } ++ ++ return 0; ++} ++ ++/** ++ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY ++ * type. ++ */ ++static void init_fslspclksel(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t val; ++ hcfg_data_t hcfg; ++ ++ if (((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls)) || ++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { ++ /* Full speed PHY */ ++ val = DWC_HCFG_48_MHZ; ++ } else { ++ /* High speed PHY running at full speed or high speed */ ++ val = DWC_HCFG_30_60_MHZ; ++ } ++ ++ DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val); ++ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); ++ hcfg.b.fslspclksel = val; ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32); ++} ++ ++/** ++ * Initializes the DevSpd field of the DCFG register depending on the PHY type ++ * and the enumeration speed of the device. ++ */ ++static void init_devspd(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t val; ++ dcfg_data_t dcfg; ++ ++ if (((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls)) || ++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { ++ /* Full speed PHY */ ++ val = 0x3; ++ } else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { ++ /* High speed PHY running at full speed */ ++ val = 0x1; ++ } else { ++ /* High speed PHY running at high speed */ ++ val = 0x0; ++ } ++ ++ DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val); ++ ++ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ dcfg.b.devspd = val; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); ++} ++ ++/** ++ * This function calculates the number of IN EPS ++ * using GHWCFG1 and GHWCFG2 registers values ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ */ ++static uint32_t calc_num_in_eps(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t num_in_eps = 0; ++ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; ++ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3; ++ uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps; ++ int i; ++ ++ for (i = 0; i < num_eps; ++i) { ++ if (!(hwcfg1 & 0x1)) ++ num_in_eps++; ++ ++ hwcfg1 >>= 2; ++ } ++ ++ if (core_if->hwcfg4.b.ded_fifo_en) { ++ num_in_eps = ++ (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps; ++ } ++ ++ return num_in_eps; ++} ++ ++/** ++ * This function calculates the number of OUT EPS ++ * using GHWCFG1 and GHWCFG2 registers values ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ */ ++static uint32_t calc_num_out_eps(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t num_out_eps = 0; ++ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; ++ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2; ++ int i; ++ ++ for (i = 0; i < num_eps; ++i) { ++ if (!(hwcfg1 & 0x1)) ++ num_out_eps++; ++ ++ hwcfg1 >>= 2; ++ } ++ return num_out_eps; ++} ++ ++/** ++ * This function initializes the DWC_otg controller registers and ++ * prepares the core for device mode or host mode operation. ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ * ++ */ ++void dwc_otg_core_init(dwc_otg_core_if_t * core_if) ++{ ++ int i = 0; ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ gahbcfg_data_t ahbcfg = {.d32 = 0 }; ++ gusbcfg_data_t usbcfg = {.d32 = 0 }; ++ gi2cctl_data_t i2cctl = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p) regs at %p\n", ++ core_if, global_regs); ++ ++ /* Common Initialization */ ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ ++ /* Program the ULPI External VBUS bit if needed */ ++ usbcfg.b.ulpi_ext_vbus_drv = ++ (core_if->core_params->phy_ulpi_ext_vbus == ++ DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0; ++ ++ /* Set external TS Dline pulsing */ ++ usbcfg.b.term_sel_dl_pulse = ++ (core_if->core_params->ts_dline == 1) ? 1 : 0; ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ ++ /* Reset the Controller */ ++ dwc_otg_core_reset(core_if); ++ ++ core_if->adp_enable = core_if->core_params->adp_supp_enable; ++ core_if->power_down = core_if->core_params->power_down; ++ core_if->otg_sts = 0; ++ ++ /* Initialize parameters from Hardware configuration registers. */ ++ dev_if->num_in_eps = calc_num_in_eps(core_if); ++ dev_if->num_out_eps = calc_num_out_eps(core_if); ++ ++ DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", ++ core_if->hwcfg4.b.num_dev_perio_in_ep); ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { ++ dev_if->perio_tx_fifo_size[i] = ++ DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16; ++ DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n", ++ i, dev_if->perio_tx_fifo_size[i]); ++ } ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ dev_if->tx_fifo_size[i] = ++ DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16; ++ DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n", ++ i, dev_if->tx_fifo_size[i]); ++ } ++ ++ core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth; ++ core_if->rx_fifo_size = DWC_READ_REG32(&global_regs->grxfsiz); ++ core_if->nperio_tx_fifo_size = ++ DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16; ++ ++ DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", ++ core_if->nperio_tx_fifo_size); ++ ++ /* This programming sequence needs to happen in FS mode before any other ++ * programming occurs */ ++ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) && ++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { ++ /* If FS mode with FS PHY */ ++ ++ /* core_init() is now called on every switch so only call the ++ * following for the first time through. */ ++ if (!core_if->phy_init_done) { ++ core_if->phy_init_done = 1; ++ DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n"); ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ usbcfg.b.physel = 1; ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ ++ /* Reset after a PHY select */ ++ dwc_otg_core_reset(core_if); ++ } ++ ++ /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also ++ * do this on HNP Dev/Host mode switches (done in dev_init and ++ * host_init). */ ++ if (dwc_otg_is_host_mode(core_if)) { ++ init_fslspclksel(core_if); ++ } else { ++ init_devspd(core_if); ++ } ++ ++ if (core_if->core_params->i2c_enable) { ++ DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n"); ++ /* Program GUSBCFG.OtgUtmifsSel to I2C */ ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ usbcfg.b.otgutmifssel = 1; ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ ++ /* Program GI2CCTL.I2CEn */ ++ i2cctl.d32 = DWC_READ_REG32(&global_regs->gi2cctl); ++ i2cctl.b.i2cdevaddr = 1; ++ i2cctl.b.i2cen = 0; ++ DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32); ++ i2cctl.b.i2cen = 1; ++ DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32); ++ } ++ ++ } /* endif speed == DWC_SPEED_PARAM_FULL */ ++ else { ++ /* High speed PHY. */ ++ if (!core_if->phy_init_done) { ++ core_if->phy_init_done = 1; ++ /* HS PHY parameters. These parameters are preserved ++ * during soft reset so only program the first time. Do ++ * a soft reset immediately after setting phyif. */ ++ ++ if (core_if->core_params->phy_type == 2) { ++ /* ULPI interface */ ++ usbcfg.b.ulpi_utmi_sel = 1; ++ usbcfg.b.phyif = 0; ++ usbcfg.b.ddrsel = ++ core_if->core_params->phy_ulpi_ddr; ++ } else if (core_if->core_params->phy_type == 1) { ++ /* UTMI+ interface */ ++ usbcfg.b.ulpi_utmi_sel = 0; ++ if (core_if->core_params->phy_utmi_width == 16) { ++ usbcfg.b.phyif = 1; ++ ++ } else { ++ usbcfg.b.phyif = 0; ++ } ++ } else { ++ DWC_ERROR("FS PHY TYPE\n"); ++ } ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ /* Reset after setting the PHY parameters */ ++ dwc_otg_core_reset(core_if); ++ } ++ } ++ ++ if ((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls)) { ++ DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n"); ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ usbcfg.b.ulpi_fsls = 1; ++ usbcfg.b.ulpi_clk_sus_m = 1; ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ } else { ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ usbcfg.b.ulpi_fsls = 0; ++ usbcfg.b.ulpi_clk_sus_m = 0; ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ } ++ ++ /* Program the GAHBCFG Register. */ ++ switch (core_if->hwcfg2.b.architecture) { ++ ++ case DWC_SLAVE_ONLY_ARCH: ++ DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n"); ++ ahbcfg.b.nptxfemplvl_txfemplvl = ++ DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; ++ ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; ++ core_if->dma_enable = 0; ++ core_if->dma_desc_enable = 0; ++ break; ++ ++ case DWC_EXT_DMA_ARCH: ++ DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n"); ++ { ++ uint8_t brst_sz = core_if->core_params->dma_burst_size; ++ ahbcfg.b.hburstlen = 0; ++ while (brst_sz > 1) { ++ ahbcfg.b.hburstlen++; ++ brst_sz >>= 1; ++ } ++ } ++ core_if->dma_enable = (core_if->core_params->dma_enable != 0); ++ core_if->dma_desc_enable = ++ (core_if->core_params->dma_desc_enable != 0); ++ break; ++ ++ case DWC_INT_DMA_ARCH: ++ DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n"); ++ /* Old value was DWC_GAHBCFG_INT_DMA_BURST_INCR - done for ++ Host mode ISOC in issue fix - vahrama */ ++ /* Broadcom had altered to (1<<3)|(0<<0) - WRESP=1, max 4 beats */ ++ ahbcfg.b.hburstlen = (1<<3)|(0<<0);//DWC_GAHBCFG_INT_DMA_BURST_INCR4; ++ core_if->dma_enable = (core_if->core_params->dma_enable != 0); ++ core_if->dma_desc_enable = ++ (core_if->core_params->dma_desc_enable != 0); ++ break; ++ ++ } ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ DWC_PRINTF("Using Descriptor DMA mode\n"); ++ } else { ++ DWC_PRINTF("Using Buffer DMA mode\n"); ++ ++ } ++ } else { ++ DWC_PRINTF("Using Slave mode\n"); ++ core_if->dma_desc_enable = 0; ++ } ++ ++ if (core_if->core_params->ahb_single) { ++ ahbcfg.b.ahbsingle = 1; ++ } ++ ++ ahbcfg.b.dmaenable = core_if->dma_enable; ++ DWC_WRITE_REG32(&global_regs->gahbcfg, ahbcfg.d32); ++ ++ core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en; ++ ++ core_if->pti_enh_enable = core_if->core_params->pti_enable != 0; ++ core_if->multiproc_int_enable = core_if->core_params->mpi_enable; ++ DWC_PRINTF("Periodic Transfer Interrupt Enhancement - %s\n", ++ ((core_if->pti_enh_enable) ? "enabled" : "disabled")); ++ DWC_PRINTF("Multiprocessor Interrupt Enhancement - %s\n", ++ ((core_if->multiproc_int_enable) ? "enabled" : "disabled")); ++ ++ /* ++ * Program the GUSBCFG register. ++ */ ++ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ ++ switch (core_if->hwcfg2.b.op_mode) { ++ case DWC_MODE_HNP_SRP_CAPABLE: ++ usbcfg.b.hnpcap = (core_if->core_params->otg_cap == ++ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE); ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_SRP_ONLY_CAPABLE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_NO_HNP_SRP_CAPABLE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = 0; ++ break; ++ ++ case DWC_MODE_SRP_CAPABLE_DEVICE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_NO_SRP_CAPABLE_DEVICE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = 0; ++ break; ++ ++ case DWC_MODE_SRP_CAPABLE_HOST: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_NO_SRP_CAPABLE_HOST: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = 0; ++ break; ++ } ++ ++ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (core_if->core_params->lpm_enable) { ++ glpmcfg_data_t lpmcfg = {.d32 = 0 }; ++ ++ /* To enable LPM support set lpm_cap_en bit */ ++ lpmcfg.b.lpm_cap_en = 1; ++ ++ /* Make AppL1Res ACK */ ++ lpmcfg.b.appl_resp = 1; ++ ++ /* Retry 3 times */ ++ lpmcfg.b.retry_count = 3; ++ ++ DWC_MODIFY_REG32(&core_if->core_global_regs->glpmcfg, ++ 0, lpmcfg.d32); ++ ++ } ++#endif ++ if (core_if->core_params->ic_usb_cap) { ++ gusbcfg_data_t gusbcfg = {.d32 = 0 }; ++ gusbcfg.b.ic_usb_cap = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gusbcfg, ++ 0, gusbcfg.d32); ++ } ++ { ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ gotgctl.b.otgver = core_if->core_params->otg_ver; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl, 0, ++ gotgctl.d32); ++ /* Set OTG version supported */ ++ core_if->otg_ver = core_if->core_params->otg_ver; ++ DWC_PRINTF("OTG VER PARAM: %d, OTG VER FLAG: %d\n", ++ core_if->core_params->otg_ver, core_if->otg_ver); ++ } ++ ++ ++ /* Enable common interrupts */ ++ dwc_otg_enable_common_interrupts(core_if); ++ ++ /* Do device or host intialization based on mode during PCD ++ * and HCD initialization */ ++ if (dwc_otg_is_host_mode(core_if)) { ++ DWC_DEBUGPL(DBG_ANY, "Host Mode\n"); ++ core_if->op_state = A_HOST; ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "Device Mode\n"); ++ core_if->op_state = B_PERIPHERAL; ++#ifdef DWC_DEVICE_ONLY ++ dwc_otg_core_dev_init(core_if); ++#endif ++ } ++} ++ ++/** ++ * This function enables the Device mode interrupts. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ ++ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__); ++ ++ /* Disable all interrupts. */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, 0); ++ ++ /* Clear any pending interrupts */ ++ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Enable the common interrupts */ ++ dwc_otg_enable_common_interrupts(core_if); ++ ++ /* Enable interrupts */ ++ intr_mask.b.usbreset = 1; ++ intr_mask.b.enumdone = 1; ++ /* Disable Disconnect interrupt in Device mode */ ++ intr_mask.b.disconnect = 0; ++ ++ if (!core_if->multiproc_int_enable) { ++ intr_mask.b.inepintr = 1; ++ intr_mask.b.outepintr = 1; ++ } ++ ++ intr_mask.b.erlysuspend = 1; ++ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.epmismatch = 1; ++ } ++ ++ //intr_mask.b.incomplisoout = 1; ++ intr_mask.b.incomplisoin = 1; ++ ++/* Enable the ignore frame number for ISOC xfers - MAS */ ++/* Disable to support high bandwith ISOC transfers - manukz */ ++#if 0 ++#ifdef DWC_UTE_PER_IO ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ dctl_data_t dctl1 = {.d32 = 0 }; ++ dctl1.b.ifrmnum = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ dctl, 0, dctl1.d32); ++ DWC_DEBUG("----Enabled Ignore frame number (0x%08x)", ++ DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->dctl)); ++ } ++ } ++#endif ++#endif ++#ifdef DWC_EN_ISOC ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ if (core_if->pti_enh_enable) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.b.ifrmnum = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ dev_if->dev_global_regs->dctl, ++ 0, dctl.d32); ++ } else { ++ intr_mask.b.incomplisoin = 1; ++ intr_mask.b.incomplisoout = 1; ++ } ++ } ++ } else { ++ intr_mask.b.incomplisoin = 1; ++ intr_mask.b.incomplisoout = 1; ++ } ++#endif /* DWC_EN_ISOC */ ++ ++ /** @todo NGS: Should this be a module parameter? */ ++#ifdef USE_PERIODIC_EP ++ intr_mask.b.isooutdrop = 1; ++ intr_mask.b.eopframe = 1; ++ intr_mask.b.incomplisoin = 1; ++ intr_mask.b.incomplisoout = 1; ++#endif ++ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, ++ DWC_READ_REG32(&global_regs->gintmsk)); ++} ++ ++/** ++ * This function initializes the DWC_otg controller registers for ++ * device mode. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ */ ++void dwc_otg_core_dev_init(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ dcfg_data_t dcfg = {.d32 = 0 }; ++ depctl_data_t diepctl = {.d32 = 0 }; ++ grstctl_t resetctl = {.d32 = 0 }; ++ uint32_t rx_fifo_size; ++ fifosize_data_t nptxfifosize; ++ fifosize_data_t txfifosize; ++ dthrctl_data_t dthrctl; ++ fifosize_data_t ptxfifosize; ++ uint16_t rxfsiz, nptxfsiz; ++ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; ++ hwcfg3_data_t hwcfg3 = {.d32 = 0 }; ++ ++ /* Restart the Phy Clock */ ++ DWC_WRITE_REG32(core_if->pcgcctl, 0); ++ ++ /* Device configuration register */ ++ init_devspd(core_if); ++ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0; ++ dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80; ++ /* Enable Device OUT NAK in case of DDMA mode*/ ++ if (core_if->core_params->dev_out_nak) { ++ dcfg.b.endevoutnak = 1; ++ } ++ ++ if (core_if->core_params->cont_on_bna) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.b.encontonbna = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } ++ ++ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ /* Configure data FIFO sizes */ ++ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { ++ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", ++ core_if->total_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", ++ params->dev_rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", ++ params->dev_nperio_tx_fifo_size); ++ ++ /* Rx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->grxfsiz)); ++ ++#ifdef DWC_UTE_CFI ++ core_if->pwron_rxfsiz = DWC_READ_REG32(&global_regs->grxfsiz); ++ core_if->init_rxfsiz = params->dev_rx_fifo_size; ++#endif ++ rx_fifo_size = params->dev_rx_fifo_size; ++ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size); ++ ++ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->grxfsiz)); ++ ++ /** Set Periodic Tx FIFO Mask all bits 0 */ ++ core_if->p_tx_msk = 0; ++ ++ /** Set Tx FIFO Mask all bits 0 */ ++ core_if->tx_msk = 0; ++ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ /* Non-periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ ++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; ++ nptxfifosize.b.startaddr = params->dev_rx_fifo_size; ++ ++ DWC_WRITE_REG32(&global_regs->gnptxfsiz, ++ nptxfifosize.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ ++ /**@todo NGS: Fix Periodic FIFO Sizing! */ ++ /* ++ * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15. ++ * Indexes of the FIFO size module parameters in the ++ * dev_perio_tx_fifo_size array and the FIFO size registers in ++ * the dptxfsiz array run from 0 to 14. ++ */ ++ /** @todo Finish debug of this */ ++ ptxfifosize.b.startaddr = ++ nptxfifosize.b.startaddr + nptxfifosize.b.depth; ++ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { ++ ptxfifosize.b.depth = ++ params->dev_perio_tx_fifo_size[i]; ++ DWC_DEBUGPL(DBG_CIL, ++ "initial dtxfsiz[%d]=%08x\n", i, ++ DWC_READ_REG32(&global_regs->dtxfsiz ++ [i])); ++ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], ++ ptxfifosize.d32); ++ DWC_DEBUGPL(DBG_CIL, "new dtxfsiz[%d]=%08x\n", ++ i, ++ DWC_READ_REG32(&global_regs->dtxfsiz ++ [i])); ++ ptxfifosize.b.startaddr += ptxfifosize.b.depth; ++ } ++ } else { ++ /* ++ * Tx FIFOs These FIFOs are numbered from 1 to 15. ++ * Indexes of the FIFO size module parameters in the ++ * dev_tx_fifo_size array and the FIFO size registers in ++ * the dtxfsiz array run from 0 to 14. ++ */ ++ ++ /* Non-periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ ++#ifdef DWC_UTE_CFI ++ core_if->pwron_gnptxfsiz = ++ (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16); ++ core_if->init_gnptxfsiz = ++ params->dev_nperio_tx_fifo_size; ++#endif ++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; ++ nptxfifosize.b.startaddr = params->dev_rx_fifo_size; ++ ++ DWC_WRITE_REG32(&global_regs->gnptxfsiz, ++ nptxfifosize.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ ++ txfifosize.b.startaddr = ++ nptxfifosize.b.startaddr + nptxfifosize.b.depth; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { ++ ++ txfifosize.b.depth = ++ params->dev_tx_fifo_size[i]; ++ ++ DWC_DEBUGPL(DBG_CIL, ++ "initial dtxfsiz[%d]=%08x\n", ++ i, ++ DWC_READ_REG32(&global_regs->dtxfsiz ++ [i])); ++ ++#ifdef DWC_UTE_CFI ++ core_if->pwron_txfsiz[i] = ++ (DWC_READ_REG32 ++ (&global_regs->dtxfsiz[i]) >> 16); ++ core_if->init_txfsiz[i] = ++ params->dev_tx_fifo_size[i]; ++#endif ++ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], ++ txfifosize.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, ++ "new dtxfsiz[%d]=%08x\n", ++ i, ++ DWC_READ_REG32(&global_regs->dtxfsiz ++ [i])); ++ ++ txfifosize.b.startaddr += txfifosize.b.depth; ++ } ++ if (core_if->snpsid <= OTG_CORE_REV_2_94a) { ++ /* Calculating DFIFOCFG for Device mode to include RxFIFO and NPTXFIFO */ ++ gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg); ++ hwcfg3.d32 = DWC_READ_REG32(&global_regs->ghwcfg3); ++ gdfifocfg.b.gdfifocfg = (DWC_READ_REG32(&global_regs->ghwcfg3) >> 16); ++ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); ++ rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff); ++ nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16); ++ gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz; ++ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); ++ } ++ } ++ ++ /* Flush the FIFOs */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */ ++ dwc_otg_flush_rx_fifo(core_if); ++ ++ /* Flush the Learning Queue. */ ++ resetctl.b.intknqflsh = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32); ++ ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) { ++ core_if->start_predict = 0; ++ for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) { ++ core_if->nextep_seq[i] = 0xff; // 0xff - EP not active ++ } ++ core_if->nextep_seq[0] = 0; ++ core_if->first_in_nextep_seq = 0; ++ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl); ++ diepctl.b.nextep = 0; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); ++ ++ /* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */ ++ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.epmscnt = 2; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ DWC_DEBUGPL(DBG_CILV,"%s first_in_nextep_seq= %2d; nextep_seq[]:\n", ++ __func__, core_if->first_in_nextep_seq); ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_DEBUGPL(DBG_CILV, "%2d ", core_if->nextep_seq[i]); ++ } ++ DWC_DEBUGPL(DBG_CILV,"\n"); ++ } ++ ++ /* Clear all pending Device Interrupts */ ++ /** @todo - if the condition needed to be checked ++ * or in any case all pending interrutps should be cleared? ++ */ ++ if (core_if->multiproc_int_enable) { ++ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { ++ DWC_WRITE_REG32(&dev_if-> ++ dev_global_regs->diepeachintmsk[i], 0); ++ } ++ } ++ ++ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { ++ DWC_WRITE_REG32(&dev_if-> ++ dev_global_regs->doepeachintmsk[i], 0); ++ } ++ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF); ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk, 0); ++ } else { ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, 0); ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, 0); ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF); ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk, 0); ++ } ++ ++ for (i = 0; i <= dev_if->num_in_eps; i++) { ++ depctl_data_t depctl; ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (depctl.b.epena) { ++ depctl.d32 = 0; ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ } else { ++ depctl.d32 = 0; ++ } ++ ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); ++ ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, 0); ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, 0); ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepint, 0xFF); ++ } ++ ++ for (i = 0; i <= dev_if->num_out_eps; i++) { ++ depctl_data_t depctl; ++ depctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl); ++ if (depctl.b.epena) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ gintmsk_data_t gintsts = {.d32 = 0 }; ++ doepint_data_t doepint = {.d32 = 0 }; ++ dctl.b.sgoutnak = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ do { ++ dwc_udelay(10); ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ } while (!gintsts.b.goutnakeff); ++ gintsts.d32 = 0; ++ gintsts.b.goutnakeff = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ depctl.d32 = 0; ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepctl, depctl.d32); ++ do { ++ dwc_udelay(10); ++ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[i]->doepint); ++ } while (!doepint.b.epdisabled); ++ ++ doepint.b.epdisabled = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepint, doepint.d32); ++ ++ dctl.d32 = 0; ++ dctl.b.cgoutnak = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } else { ++ depctl.d32 = 0; ++ } ++ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32); ++ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doeptsiz, 0); ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepdma, 0); ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepint, 0xFF); ++ } ++ ++ if (core_if->en_multiple_tx_fifo && core_if->dma_enable) { ++ dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1; ++ dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1; ++ dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1; ++ ++ dev_if->rx_thr_length = params->rx_thr_length; ++ dev_if->tx_thr_length = params->tx_thr_length; ++ ++ dev_if->setup_desc_index = 0; ++ ++ dthrctl.d32 = 0; ++ dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en; ++ dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en; ++ dthrctl.b.tx_thr_len = dev_if->tx_thr_length; ++ dthrctl.b.rx_thr_en = dev_if->rx_thr_en; ++ dthrctl.b.rx_thr_len = dev_if->rx_thr_length; ++ dthrctl.b.ahb_thr_ratio = params->ahb_thr_ratio; ++ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dtknqr3_dthrctl, ++ dthrctl.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, ++ "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n", ++ dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, ++ dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, ++ dthrctl.b.rx_thr_len); ++ ++ } ++ ++ dwc_otg_enable_device_interrupts(core_if); ++ ++ { ++ diepmsk_data_t msk = {.d32 = 0 }; ++ msk.b.txfifoundrn = 1; ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs-> ++ diepeachintmsk[0], msk.d32, msk.d32); ++ } else { ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk, ++ msk.d32, msk.d32); ++ } ++ } ++ ++ if (core_if->multiproc_int_enable) { ++ /* Set NAK on Babble */ ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.b.nakonbble = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } ++ ++ if (core_if->snpsid >= OTG_CORE_REV_2_94a) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dctl); ++ dctl.b.sftdiscon = 0; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl, dctl.d32); ++ } ++} ++ ++/** ++ * This function enables the Host mode interrupts. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CIL, "%s(%p)\n", __func__, core_if); ++ ++ /* Disable all interrupts. */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, 0); ++ ++ /* Clear any pending interrupts. */ ++ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Enable the common interrupts */ ++ dwc_otg_enable_common_interrupts(core_if); ++ ++ /* ++ * Enable host mode interrupts without disturbing common ++ * interrupts. ++ */ ++ ++ intr_mask.b.disconnect = 1; ++ intr_mask.b.portintr = 1; ++ intr_mask.b.hcintr = 1; ++ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); ++} ++ ++/** ++ * This function disables the Host Mode interrupts. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__); ++ ++ /* ++ * Disable host mode interrupts without disturbing common ++ * interrupts. ++ */ ++ intr_mask.b.sofintr = 1; ++ intr_mask.b.portintr = 1; ++ intr_mask.b.hcintr = 1; ++ intr_mask.b.ptxfempty = 1; ++ intr_mask.b.nptxfempty = 1; ++ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, 0); ++} ++ ++/** ++ * This function initializes the DWC_otg controller registers for ++ * host mode. ++ * ++ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the ++ * request queues. Host channels are reset to ensure that they are ready for ++ * performing transfers. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ */ ++void dwc_otg_core_host_init(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_host_if_t *host_if = core_if->host_if; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ fifosize_data_t nptxfifosize; ++ fifosize_data_t ptxfifosize; ++ uint16_t rxfsiz, nptxfsiz, hptxfsiz; ++ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; ++ int i; ++ hcchar_data_t hcchar; ++ hcfg_data_t hcfg; ++ hfir_data_t hfir; ++ dwc_otg_hc_regs_t *hc_regs; ++ int num_channels; ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if); ++ ++ /* Restart the Phy Clock */ ++ DWC_WRITE_REG32(core_if->pcgcctl, 0); ++ ++ /* Initialize Host Configuration Register */ ++ init_fslspclksel(core_if); ++ if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { ++ hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg); ++ hcfg.b.fslssupp = 1; ++ DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32); ++ ++ } ++ ++ /* This bit allows dynamic reloading of the HFIR register ++ * during runtime. This bit needs to be programmed during ++ * initial configuration and its value must not be changed ++ * during runtime.*/ ++ if (core_if->core_params->reload_ctl == 1) { ++ hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir); ++ hfir.b.hfirrldctrl = 1; ++ DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32); ++ } ++ ++ if (core_if->core_params->dma_desc_enable) { ++ uint8_t op_mode = core_if->hwcfg2.b.op_mode; ++ if (! ++ (core_if->hwcfg4.b.desc_dma ++ && (core_if->snpsid >= OTG_CORE_REV_2_90a) ++ && ((op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ++ || (op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ++ || (op_mode == ++ DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG) ++ || (op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST) ++ || (op_mode == ++ DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST)))) { ++ ++ DWC_ERROR("Host can't operate in Descriptor DMA mode.\n" ++ "Either core version is below 2.90a or " ++ "GHWCFG2, GHWCFG4 registers' values do not allow Descriptor DMA in host mode.\n" ++ "To run the driver in Buffer DMA host mode set dma_desc_enable " ++ "module parameter to 0.\n"); ++ return; ++ } ++ hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg); ++ hcfg.b.descdma = 1; ++ DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32); ++ } ++ ++ /* Configure data FIFO sizes */ ++ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { ++ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", ++ core_if->total_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", ++ params->host_rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", ++ params->host_nperio_tx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "P Tx FIFO Size=%d\n", ++ params->host_perio_tx_fifo_size); ++ ++ /* Rx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->grxfsiz)); ++ DWC_WRITE_REG32(&global_regs->grxfsiz, ++ params->host_rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->grxfsiz)); ++ ++ /* Non-periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ nptxfifosize.b.depth = params->host_nperio_tx_fifo_size; ++ nptxfifosize.b.startaddr = params->host_rx_fifo_size; ++ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32); ++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxfsiz)); ++ ++ /* Periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial hptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->hptxfsiz)); ++ ptxfifosize.b.depth = params->host_perio_tx_fifo_size; ++ ptxfifosize.b.startaddr = ++ nptxfifosize.b.startaddr + nptxfifosize.b.depth; ++ DWC_WRITE_REG32(&global_regs->hptxfsiz, ptxfifosize.d32); ++ DWC_DEBUGPL(DBG_CIL, "new hptxfsiz=%08x\n", ++ DWC_READ_REG32(&global_regs->hptxfsiz)); ++ ++ if (core_if->en_multiple_tx_fifo ++ && core_if->snpsid <= OTG_CORE_REV_2_94a) { ++ /* Global DFIFOCFG calculation for Host mode - include RxFIFO, NPTXFIFO and HPTXFIFO */ ++ gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg); ++ rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff); ++ nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16); ++ hptxfsiz = (DWC_READ_REG32(&global_regs->hptxfsiz) >> 16); ++ gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz + hptxfsiz; ++ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); ++ } ++ } ++ ++ /* TODO - check this */ ++ /* Clear Host Set HNP Enable in the OTG Control Register */ ++ gotgctl.b.hstsethnpen = 1; ++ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); ++ /* Make sure the FIFOs are flushed. */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10 /* all TX FIFOs */ ); ++ dwc_otg_flush_rx_fifo(core_if); ++ ++ /* Clear Host Set HNP Enable in the OTG Control Register */ ++ gotgctl.b.hstsethnpen = 1; ++ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); ++ ++ if (!core_if->core_params->dma_desc_enable) { ++ /* Flush out any leftover queued requests. */ ++ num_channels = core_if->core_params->host_channels; ++ ++ for (i = 0; i < num_channels; i++) { ++ hc_regs = core_if->host_if->hc_regs[i]; ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.chen = 0; ++ hcchar.b.chdis = 1; ++ hcchar.b.epdir = 0; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ } ++ ++ /* Halt all channels to put them into a known state. */ ++ for (i = 0; i < num_channels; i++) { ++ int count = 0; ++ hc_regs = core_if->host_if->hc_regs[i]; ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 1; ++ hcchar.b.epdir = 0; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d regs %p\n", __func__, i, hc_regs); ++ do { ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (++count > 1000) { ++ DWC_ERROR ++ ("%s: Unable to clear halt on channel %d (timeout HCCHAR 0x%X @%p)\n", ++ __func__, i, hcchar.d32, &hc_regs->hcchar); ++ break; ++ } ++ dwc_udelay(1); ++ } while (hcchar.b.chen); ++ } ++ } ++ ++ /* Turn on the vbus power. */ ++ DWC_PRINTF("Init: Port Power? op_state=%d\n", core_if->op_state); ++ if (core_if->op_state == A_HOST) { ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ DWC_PRINTF("Init: Power Port (%d)\n", hprt0.b.prtpwr); ++ if (hprt0.b.prtpwr == 0) { ++ hprt0.b.prtpwr = 1; ++ DWC_WRITE_REG32(host_if->hprt0, hprt0.d32); ++ } ++ } ++ ++ dwc_otg_enable_host_interrupts(core_if); ++} ++ ++/** ++ * Prepares a host channel for transferring packets to/from a specific ++ * endpoint. The HCCHARn register is set up with the characteristics specified ++ * in _hc. Host channel interrupts that may need to be serviced while this ++ * transfer is in progress are enabled. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * @param hc Information needed to initialize the host channel ++ */ ++void dwc_otg_hc_init(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ hcintmsk_data_t hc_intr_mask; ++ hcchar_data_t hcchar; ++ hcsplt_data_t hcsplt; ++ ++ uint8_t hc_num = hc->hc_num; ++ dwc_otg_host_if_t *host_if = core_if->host_if; ++ dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num]; ++ ++ /* Clear old interrupt conditions for this host channel. */ ++ hc_intr_mask.d32 = 0xFFFFFFFF; ++ hc_intr_mask.b.reserved14_31 = 0; ++ DWC_WRITE_REG32(&hc_regs->hcint, hc_intr_mask.d32); ++ ++ /* Enable channel interrupts required for this transfer. */ ++ hc_intr_mask.d32 = 0; ++ hc_intr_mask.b.chhltd = 1; ++ if (core_if->dma_enable) { ++ /* For Descriptor DMA mode core halts the channel on AHB error. Interrupt is not required */ ++ if (!core_if->dma_desc_enable) ++ hc_intr_mask.b.ahberr = 1; ++ else { ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) ++ hc_intr_mask.b.xfercompl = 1; ++ } ++ ++ if (hc->error_state && !hc->do_split && ++ hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { ++ hc_intr_mask.b.ack = 1; ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.datatglerr = 1; ++ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) { ++ hc_intr_mask.b.nak = 1; ++ } ++ } ++ } ++ } else { ++ switch (hc->ep_type) { ++ case DWC_OTG_EP_TYPE_CONTROL: ++ case DWC_OTG_EP_TYPE_BULK: ++ hc_intr_mask.b.xfercompl = 1; ++ hc_intr_mask.b.stall = 1; ++ hc_intr_mask.b.xacterr = 1; ++ hc_intr_mask.b.datatglerr = 1; ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.bblerr = 1; ++ } else { ++ hc_intr_mask.b.nak = 1; ++ hc_intr_mask.b.nyet = 1; ++ if (hc->do_ping) { ++ hc_intr_mask.b.ack = 1; ++ } ++ } ++ ++ if (hc->do_split) { ++ hc_intr_mask.b.nak = 1; ++ if (hc->complete_split) { ++ hc_intr_mask.b.nyet = 1; ++ } else { ++ hc_intr_mask.b.ack = 1; ++ } ++ } ++ ++ if (hc->error_state) { ++ hc_intr_mask.b.ack = 1; ++ } ++ break; ++ case DWC_OTG_EP_TYPE_INTR: ++ hc_intr_mask.b.xfercompl = 1; ++ hc_intr_mask.b.nak = 1; ++ hc_intr_mask.b.stall = 1; ++ hc_intr_mask.b.xacterr = 1; ++ hc_intr_mask.b.datatglerr = 1; ++ hc_intr_mask.b.frmovrun = 1; ++ ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.bblerr = 1; ++ } ++ if (hc->error_state) { ++ hc_intr_mask.b.ack = 1; ++ } ++ if (hc->do_split) { ++ if (hc->complete_split) { ++ hc_intr_mask.b.nyet = 1; ++ } else { ++ hc_intr_mask.b.ack = 1; ++ } ++ } ++ break; ++ case DWC_OTG_EP_TYPE_ISOC: ++ hc_intr_mask.b.xfercompl = 1; ++ hc_intr_mask.b.frmovrun = 1; ++ hc_intr_mask.b.ack = 1; ++ ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.xacterr = 1; ++ hc_intr_mask.b.bblerr = 1; ++ } ++ break; ++ } ++ } ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, hc_intr_mask.d32); ++ ++ /* ++ * Program the HCCHARn register with the endpoint characteristics for ++ * the current transfer. ++ */ ++ hcchar.d32 = 0; ++ hcchar.b.devaddr = hc->dev_addr; ++ hcchar.b.epnum = hc->ep_num; ++ hcchar.b.epdir = hc->ep_is_in; ++ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW); ++ hcchar.b.eptype = hc->ep_type; ++ hcchar.b.mps = hc->max_packet; ++ ++ DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32); ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d, Dev Addr %d, EP #%d\n", ++ __func__, hc->hc_num, hcchar.b.devaddr, hcchar.b.epnum); ++ DWC_DEBUGPL(DBG_HCDV, " Is In %d, Is Low Speed %d, EP Type %d, " ++ "Max Pkt %d, Multi Cnt %d\n", ++ hcchar.b.epdir, hcchar.b.lspddev, hcchar.b.eptype, ++ hcchar.b.mps, hcchar.b.multicnt); ++ ++ /* ++ * Program the HCSPLIT register for SPLITs ++ */ ++ hcsplt.d32 = 0; ++ if (hc->do_split) { ++ DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", ++ hc->hc_num, ++ hc->complete_split ? "CSPLIT" : "SSPLIT"); ++ hcsplt.b.compsplt = hc->complete_split; ++ hcsplt.b.xactpos = hc->xact_pos; ++ hcsplt.b.hubaddr = hc->hub_addr; ++ hcsplt.b.prtaddr = hc->port_addr; ++ DWC_DEBUGPL(DBG_HCDV, "\t comp split %d\n", hc->complete_split); ++ DWC_DEBUGPL(DBG_HCDV, "\t xact pos %d\n", hc->xact_pos); ++ DWC_DEBUGPL(DBG_HCDV, "\t hub addr %d\n", hc->hub_addr); ++ DWC_DEBUGPL(DBG_HCDV, "\t port addr %d\n", hc->port_addr); ++ DWC_DEBUGPL(DBG_HCDV, "\t is_in %d\n", hc->ep_is_in); ++ DWC_DEBUGPL(DBG_HCDV, "\t Max Pkt: %d\n", hcchar.b.mps); ++ DWC_DEBUGPL(DBG_HCDV, "\t xferlen: %d\n", hc->xfer_len); ++ } ++ DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32); ++ ++} ++ ++/** ++ * Attempts to halt a host channel. This function should only be called in ++ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under ++ * normal circumstances in DMA mode, the controller halts the channel when the ++ * transfer is complete or a condition occurs that requires application ++ * intervention. ++ * ++ * In slave mode, checks for a free request queue entry, then sets the Channel ++ * Enable and Channel Disable bits of the Host Channel Characteristics ++ * register of the specified channel to intiate the halt. If there is no free ++ * request queue entry, sets only the Channel Disable bit of the HCCHARn ++ * register to flush requests for this channel. In the latter case, sets a ++ * flag to indicate that the host channel needs to be halted when a request ++ * queue slot is open. ++ * ++ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the ++ * HCCHARn register. The controller ensures there is space in the request ++ * queue before submitting the halt request. ++ * ++ * Some time may elapse before the core flushes any posted requests for this ++ * host channel and halts. The Channel Halted interrupt handler completes the ++ * deactivation of the host channel. ++ * ++ * @param core_if Controller register interface. ++ * @param hc Host channel to halt. ++ * @param halt_status Reason for halting the channel. ++ */ ++void dwc_otg_hc_halt(dwc_otg_core_if_t * core_if, ++ dwc_hc_t * hc, dwc_otg_halt_status_e halt_status) ++{ ++ gnptxsts_data_t nptxsts; ++ hptxsts_data_t hptxsts; ++ hcchar_data_t hcchar; ++ dwc_otg_hc_regs_t *hc_regs; ++ dwc_otg_core_global_regs_t *global_regs; ++ dwc_otg_host_global_regs_t *host_global_regs; ++ ++ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ global_regs = core_if->core_global_regs; ++ host_global_regs = core_if->host_if->host_global_regs; ++ ++ DWC_ASSERT(!(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS), ++ "halt_status = %d\n", halt_status); ++ ++ if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || ++ halt_status == DWC_OTG_HC_XFER_AHB_ERR) { ++ /* ++ * Disable all channel interrupts except Ch Halted. The QTD ++ * and QH state associated with this transfer has been cleared ++ * (in the case of URB_DEQUEUE), so the channel needs to be ++ * shut down carefully to prevent crashes. ++ */ ++ hcintmsk_data_t hcintmsk; ++ hcintmsk.d32 = 0; ++ hcintmsk.b.chhltd = 1; ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, hcintmsk.d32); ++ ++ /* ++ * Make sure no other interrupts besides halt are currently ++ * pending. Handling another interrupt could cause a crash due ++ * to the QTD and QH state. ++ */ ++ DWC_WRITE_REG32(&hc_regs->hcint, ~hcintmsk.d32); ++ ++ /* ++ * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR ++ * even if the channel was already halted for some other ++ * reason. ++ */ ++ hc->halt_status = halt_status; ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen == 0) { ++ /* ++ * The channel is either already halted or it hasn't ++ * started yet. In DMA mode, the transfer may halt if ++ * it finishes normally or a condition occurs that ++ * requires driver intervention. Don't want to halt ++ * the channel again. In either Slave or DMA mode, ++ * it's possible that the transfer has been assigned ++ * to a channel, but not started yet when an URB is ++ * dequeued. Don't want to halt a channel that hasn't ++ * started yet. ++ */ ++ return; ++ } ++ } ++ if (hc->halt_pending) { ++ /* ++ * A halt has already been issued for this channel. This might ++ * happen when a transfer is aborted by a higher level in ++ * the stack. ++ */ ++#ifdef DEBUG ++ DWC_PRINTF ++ ("*** %s: Channel %d, _hc->halt_pending already set ***\n", ++ __func__, hc->hc_num); ++ ++#endif ++ return; ++ } ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* No need to set the bit in DDMA for disabling the channel */ ++ //TODO check it everywhere channel is disabled ++ if (!core_if->core_params->dma_desc_enable) ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 1; ++ ++ if (!core_if->dma_enable) { ++ /* Check for space in the request queue to issue the halt. */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || ++ hc->ep_type == DWC_OTG_EP_TYPE_BULK) { ++ nptxsts.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ if (nptxsts.b.nptxqspcavail == 0) { ++ hcchar.b.chen = 0; ++ } ++ } else { ++ hptxsts.d32 = ++ DWC_READ_REG32(&host_global_regs->hptxsts); ++ if ((hptxsts.b.ptxqspcavail == 0) ++ || (core_if->queuing_high_bandwidth)) { ++ hcchar.b.chen = 0; ++ } ++ } ++ } ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ hc->halt_status = halt_status; ++ ++ if (hcchar.b.chen) { ++ hc->halt_pending = 1; ++ hc->halt_on_queue = 0; ++ } else { ++ hc->halt_on_queue = 1; ++ } ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32); ++ DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", hc->halt_pending); ++ DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", hc->halt_on_queue); ++ DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", hc->halt_status); ++ ++ return; ++} ++ ++/** ++ * Clears the transfer state for a host channel. This function is normally ++ * called after a transfer is done and the host channel is being released. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Identifies the host channel to clean up. ++ */ ++void dwc_otg_hc_cleanup(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ dwc_otg_hc_regs_t *hc_regs; ++ ++ hc->xfer_started = 0; ++ ++ /* ++ * Clear channel interrupt enables and any unhandled channel interrupt ++ * conditions. ++ */ ++ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0); ++ DWC_WRITE_REG32(&hc_regs->hcint, 0xFFFFFFFF); ++#ifdef DEBUG ++ DWC_TIMER_CANCEL(core_if->hc_xfer_timer[hc->hc_num]); ++#endif ++} ++ ++/** ++ * Sets the channel property that indicates in which frame a periodic transfer ++ * should occur. This is always set to the _next_ frame. This function has no ++ * effect on non-periodic transfers. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Identifies the host channel to set up and its properties. ++ * @param hcchar Current value of the HCCHAR register for the specified host ++ * channel. ++ */ ++static inline void hc_set_even_odd_frame(dwc_otg_core_if_t * core_if, ++ dwc_hc_t * hc, hcchar_data_t * hcchar) ++{ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ hfnum_data_t hfnum; ++ hfnum.d32 = ++ DWC_READ_REG32(&core_if->host_if->host_global_regs->hfnum); ++ ++ /* 1 if _next_ frame is odd, 0 if it's even */ ++ hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1; ++#ifdef DEBUG ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split ++ && !hc->complete_split) { ++ switch (hfnum.b.frnum & 0x7) { ++ case 7: ++ core_if->hfnum_7_samples++; ++ core_if->hfnum_7_frrem_accum += hfnum.b.frrem; ++ break; ++ case 0: ++ core_if->hfnum_0_samples++; ++ core_if->hfnum_0_frrem_accum += hfnum.b.frrem; ++ break; ++ default: ++ core_if->hfnum_other_samples++; ++ core_if->hfnum_other_frrem_accum += ++ hfnum.b.frrem; ++ break; ++ } ++ } ++#endif ++ } ++} ++ ++#ifdef DEBUG ++void hc_xfer_timeout(void *ptr) ++{ ++ hc_xfer_info_t *xfer_info = NULL; ++ int hc_num = 0; ++ ++ if (ptr) ++ xfer_info = (hc_xfer_info_t *) ptr; ++ ++ if (!xfer_info->hc) { ++ DWC_ERROR("xfer_info->hc = %p\n", xfer_info->hc); ++ return; ++ } ++ ++ hc_num = xfer_info->hc->hc_num; ++ DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num); ++ DWC_WARN(" start_hcchar_val 0x%08x\n", ++ xfer_info->core_if->start_hcchar_val[hc_num]); ++} ++#endif ++ ++void ep_xfer_timeout(void *ptr) ++{ ++ ep_xfer_info_t *xfer_info = NULL; ++ int ep_num = 0; ++ dctl_data_t dctl = {.d32 = 0 }; ++ gintsts_data_t gintsts = {.d32 = 0 }; ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ ++ if (ptr) ++ xfer_info = (ep_xfer_info_t *) ptr; ++ ++ if (!xfer_info->ep) { ++ DWC_ERROR("xfer_info->ep = %p\n", xfer_info->ep); ++ return; ++ } ++ ++ ep_num = xfer_info->ep->num; ++ DWC_WARN("%s: timeout on endpoit %d\n", __func__, ep_num); ++ /* Put the sate to 2 as it was time outed */ ++ xfer_info->state = 2; ++ ++ dctl.d32 = ++ DWC_READ_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl); ++ gintsts.d32 = ++ DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintsts); ++ gintmsk.d32 = ++ DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintmsk); ++ ++ if (!gintmsk.b.goutnakeff) { ++ /* Unmask it */ ++ gintmsk.b.goutnakeff = 1; ++ DWC_WRITE_REG32(&xfer_info->core_if->core_global_regs->gintmsk, ++ gintmsk.d32); ++ ++ } ++ ++ if (!gintsts.b.goutnakeff) { ++ dctl.b.sgoutnak = 1; ++ } ++ DWC_WRITE_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl, ++ dctl.d32); ++ ++} ++ ++void set_pid_isoc(dwc_hc_t * hc) ++{ ++ /* Set up the initial PID for the transfer. */ ++ if (hc->speed == DWC_OTG_EP_SPEED_HIGH) { ++ if (hc->ep_is_in) { ++ if (hc->multi_count == 1) { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; ++ } else if (hc->multi_count == 2) { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA1; ++ } else { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA2; ++ } ++ } else { ++ if (hc->multi_count == 1) { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; ++ } else { ++ hc->data_pid_start = DWC_OTG_HC_PID_MDATA; ++ } ++ } ++ } else { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for a host channel and ++ * starts the transfer. May be called in either Slave mode or DMA mode. In ++ * Slave mode, the caller must ensure that there is sufficient space in the ++ * request queue and Tx Data FIFO. ++ * ++ * For an OUT transfer in Slave mode, it loads a data packet into the ++ * appropriate FIFO. If necessary, additional data packets will be loaded in ++ * the Host ISR. ++ * ++ * For an IN transfer in Slave mode, a data packet is requested. The data ++ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, ++ * additional data packets are requested in the Host ISR. ++ * ++ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ ++ * register along with a packet count of 1 and the channel is enabled. This ++ * causes a single PING transaction to occur. Other fields in HCTSIZ are ++ * simply set to 0 since no data transfer occurs in this case. ++ * ++ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with ++ * all the information required to perform the subsequent data transfer. In ++ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the ++ * controller performs the entire PING protocol, then starts the data ++ * transfer. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Information needed to initialize the host channel. The xfer_len ++ * value may be reduced to accommodate the max widths of the XferSize and ++ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed ++ * to reflect the final xfer_len value. ++ */ ++void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ uint16_t num_packets; ++ uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size; ++ uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count; ++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ ++ hctsiz.d32 = 0; ++ ++ if (hc->do_ping) { ++ if (!core_if->dma_enable) { ++ dwc_otg_hc_do_ping(core_if, hc); ++ hc->xfer_started = 1; ++ return; ++ } else { ++ hctsiz.b.dopng = 1; ++ } ++ } ++ ++ if (hc->do_split) { ++ num_packets = 1; ++ ++ if (hc->complete_split && !hc->ep_is_in) { ++ /* For CSPLIT OUT Transfer, set the size to 0 so the ++ * core doesn't expect any data written to the FIFO */ ++ hc->xfer_len = 0; ++ } else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) { ++ hc->xfer_len = hc->max_packet; ++ } else if (!hc->ep_is_in && (hc->xfer_len > 188)) { ++ hc->xfer_len = 188; ++ } ++ ++ hctsiz.b.xfersize = hc->xfer_len; ++ } else { ++ /* ++ * Ensure that the transfer length and packet count will fit ++ * in the widths allocated for them in the HCTSIZn register. ++ */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * Make sure the transfer size is no larger than one ++ * (micro)frame's worth of data. (A check was done ++ * when the periodic transfer was accepted to ensure ++ * that a (micro)frame's worth of data can be ++ * programmed into a channel.) ++ */ ++ uint32_t max_periodic_len = ++ hc->multi_count * hc->max_packet; ++ if (hc->xfer_len > max_periodic_len) { ++ hc->xfer_len = max_periodic_len; ++ } else { ++ } ++ } else if (hc->xfer_len > max_hc_xfer_size) { ++ /* Make sure that xfer_len is a multiple of max packet size. */ ++ hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1; ++ } ++ ++ if (hc->xfer_len > 0) { ++ num_packets = ++ (hc->xfer_len + hc->max_packet - ++ 1) / hc->max_packet; ++ if (num_packets > max_hc_pkt_count) { ++ num_packets = max_hc_pkt_count; ++ hc->xfer_len = num_packets * hc->max_packet; ++ } ++ } else { ++ /* Need 1 packet for transfer length of 0. */ ++ num_packets = 1; ++ } ++ ++ if (hc->ep_is_in) { ++ /* Always program an integral # of max packets for IN transfers. */ ++ hc->xfer_len = num_packets * hc->max_packet; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * Make sure that the multi_count field matches the ++ * actual transfer length. ++ */ ++ hc->multi_count = num_packets; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) ++ set_pid_isoc(hc); ++ ++ hctsiz.b.xfersize = hc->xfer_len; ++ } ++ ++ hc->start_pkt_count = num_packets; ++ hctsiz.b.pktcnt = num_packets; ++ hctsiz.b.pid = hc->data_pid_start; ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize); ++ DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt); ++ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); ++ ++ if (core_if->dma_enable) { ++ dwc_dma_t dma_addr; ++ if (hc->align_buff) { ++ dma_addr = hc->align_buff; ++ } else { ++ dma_addr = ((unsigned long)hc->xfer_buff & 0xffffffff); ++ } ++ DWC_WRITE_REG32(&hc_regs->hcdma, dma_addr); ++ } ++ ++ /* Start the split */ ++ if (hc->do_split) { ++ hcsplt_data_t hcsplt; ++ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); ++ hcsplt.b.spltena = 1; ++ DWC_WRITE_REG32(&hc_regs->hcsplt, hcsplt.d32); ++ } ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.multicnt = hc->multi_count; ++ hc_set_even_odd_frame(core_if, hc, &hcchar); ++#ifdef DEBUG ++ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32; ++ if (hcchar.b.chdis) { ++ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", ++ __func__, hc->hc_num, hcchar.d32); ++ } ++#endif ++ ++ /* Set host channel enable after all other setup is complete. */ ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ hc->xfer_started = 1; ++ hc->requests++; ++ ++ if (!core_if->dma_enable && !hc->ep_is_in && hc->xfer_len > 0) { ++ /* Load OUT packet into the appropriate Tx FIFO. */ ++ dwc_otg_hc_write_packet(core_if, hc); ++ } ++#ifdef DEBUG ++ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) { ++ DWC_DEBUGPL(DBG_HCDV, "transfer %d from core_if %p\n", ++ hc->hc_num, core_if);//GRAYG ++ core_if->hc_xfer_info[hc->hc_num].core_if = core_if; ++ core_if->hc_xfer_info[hc->hc_num].hc = hc; ++ ++ /* Start a timer for this transfer. */ ++ DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000); ++ } ++#endif ++} ++ ++/** ++ * This function does the setup for a data transfer for a host channel ++ * and starts the transfer in Descriptor DMA mode. ++ * ++ * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set. ++ * Sets PID and NTD values. For periodic transfers ++ * initializes SCHED_INFO field with micro-frame bitmap. ++ * ++ * Initializes HCDMA register with descriptor list address and CTD value ++ * then starts the transfer via enabling the channel. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Information needed to initialize the host channel. ++ */ ++void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ hcdma_data_t hcdma; ++ ++ hctsiz.d32 = 0; ++ ++ if (hc->do_ping) ++ hctsiz.b_ddma.dopng = 1; ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) ++ set_pid_isoc(hc); ++ ++ /* Packet Count and Xfer Size are not used in Descriptor DMA mode */ ++ hctsiz.b_ddma.pid = hc->data_pid_start; ++ hctsiz.b_ddma.ntd = hc->ntd - 1; /* 0 - 1 descriptor, 1 - 2 descriptors, etc. */ ++ hctsiz.b_ddma.schinfo = hc->schinfo; /* Non-zero only for high-speed interrupt endpoints */ ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); ++ DWC_DEBUGPL(DBG_HCDV, " NTD: %d\n", hctsiz.b_ddma.ntd); ++ ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ hcdma.d32 = 0; ++ hcdma.b.dma_addr = ((uint32_t) hc->desc_list_addr) >> 11; ++ ++ /* Always start from first descriptor. */ ++ hcdma.b.ctd = 0; ++ DWC_WRITE_REG32(&hc_regs->hcdma, hcdma.d32); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.multicnt = hc->multi_count; ++ ++#ifdef DEBUG ++ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32; ++ if (hcchar.b.chdis) { ++ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", ++ __func__, hc->hc_num, hcchar.d32); ++ } ++#endif ++ ++ /* Set host channel enable after all other setup is complete. */ ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ hc->xfer_started = 1; ++ hc->requests++; ++ ++#ifdef DEBUG ++ if ((hc->ep_type != DWC_OTG_EP_TYPE_INTR) ++ && (hc->ep_type != DWC_OTG_EP_TYPE_ISOC)) { ++ DWC_DEBUGPL(DBG_HCDV, "DMA transfer %d from core_if %p\n", ++ hc->hc_num, core_if);//GRAYG ++ core_if->hc_xfer_info[hc->hc_num].core_if = core_if; ++ core_if->hc_xfer_info[hc->hc_num].hc = hc; ++ /* Start a timer for this transfer. */ ++ DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000); ++ } ++#endif ++ ++} ++ ++/** ++ * This function continues a data transfer that was started by previous call ++ * to dwc_otg_hc_start_transfer. The caller must ensure there is ++ * sufficient space in the request queue and Tx Data FIFO. This function ++ * should only be called in Slave mode. In DMA mode, the controller acts ++ * autonomously to complete transfers programmed to a host channel. ++ * ++ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO ++ * if there is any data remaining to be queued. For an IN transfer, another ++ * data packet is always requested. For the SETUP phase of a control transfer, ++ * this function does nothing. ++ * ++ * @return 1 if a new request is queued, 0 if no more requests are required ++ * for this transfer. ++ */ ++int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ ++ if (hc->do_split) { ++ /* SPLITs always queue just once per channel */ ++ return 0; ++ } else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { ++ /* SETUPs are queued only once since they can't be NAKed. */ ++ return 0; ++ } else if (hc->ep_is_in) { ++ /* ++ * Always queue another request for other IN transfers. If ++ * back-to-back INs are issued and NAKs are received for both, ++ * the driver may still be processing the first NAK when the ++ * second NAK is received. When the interrupt handler clears ++ * the NAK interrupt for the first NAK, the second NAK will ++ * not be seen. So we can't depend on the NAK interrupt ++ * handler to requeue a NAKed request. Instead, IN requests ++ * are issued each time this function is called. When the ++ * transfer completes, the extra requests for the channel will ++ * be flushed. ++ */ ++ hcchar_data_t hcchar; ++ dwc_otg_hc_regs_t *hc_regs = ++ core_if->host_if->hc_regs[hc->hc_num]; ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hc_set_even_odd_frame(core_if, hc, &hcchar); ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", ++ hcchar.d32); ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ hc->requests++; ++ return 1; ++ } else { ++ /* OUT transfers. */ ++ if (hc->xfer_count < hc->xfer_len) { ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ hcchar_data_t hcchar; ++ dwc_otg_hc_regs_t *hc_regs; ++ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hc_set_even_odd_frame(core_if, hc, &hcchar); ++ } ++ ++ /* Load OUT packet into the appropriate Tx FIFO. */ ++ dwc_otg_hc_write_packet(core_if, hc); ++ hc->requests++; ++ return 1; ++ } else { ++ return 0; ++ } ++ } ++} ++ ++/** ++ * Starts a PING transfer. This function should only be called in Slave mode. ++ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled. ++ */ ++void dwc_otg_hc_do_ping(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ ++ hctsiz.d32 = 0; ++ hctsiz.b.dopng = 1; ++ hctsiz.b.pktcnt = 1; ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++} ++ ++/* ++ * This function writes a packet into the Tx FIFO associated with the Host ++ * Channel. For a channel associated with a non-periodic EP, the non-periodic ++ * Tx FIFO is written. For a channel associated with a periodic EP, the ++ * periodic Tx FIFO is written. This function should only be called in Slave ++ * mode. ++ * ++ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by ++ * then number of bytes written to the Tx FIFO. ++ */ ++void dwc_otg_hc_write_packet(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) ++{ ++ uint32_t i; ++ uint32_t remaining_count; ++ uint32_t byte_count; ++ uint32_t dword_count; ++ ++ uint32_t *data_buff = (uint32_t *) (hc->xfer_buff); ++ uint32_t *data_fifo = core_if->data_fifo[hc->hc_num]; ++ ++ remaining_count = hc->xfer_len - hc->xfer_count; ++ if (remaining_count > hc->max_packet) { ++ byte_count = hc->max_packet; ++ } else { ++ byte_count = remaining_count; ++ } ++ ++ dword_count = (byte_count + 3) / 4; ++ ++ if ((((unsigned long)data_buff) & 0x3) == 0) { ++ /* xfer_buff is DWORD aligned. */ ++ for (i = 0; i < dword_count; i++, data_buff++) { ++ DWC_WRITE_REG32(data_fifo, *data_buff); ++ } ++ } else { ++ /* xfer_buff is not DWORD aligned. */ ++ for (i = 0; i < dword_count; i++, data_buff++) { ++ uint32_t data; ++ data = ++ (data_buff[0] | data_buff[1] << 8 | data_buff[2] << ++ 16 | data_buff[3] << 24); ++ DWC_WRITE_REG32(data_fifo, data); ++ } ++ } ++ ++ hc->xfer_count += byte_count; ++ hc->xfer_buff += byte_count; ++} ++ ++/** ++ * Gets the current USB frame number. This is the frame number from the last ++ * SOF packet. ++ */ ++uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * core_if) ++{ ++ dsts_data_t dsts; ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ /* read current frame/microframe number from DSTS register */ ++ return dsts.b.soffn; ++} ++ ++/** ++ * Calculates and gets the frame Interval value of HFIR register according PHY ++ * type and speed.The application can modify a value of HFIR register only after ++ * the Port Enable bit of the Host Port Control and Status register ++ * (HPRT.PrtEnaPort) has been set. ++*/ ++ ++uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if) ++{ ++ gusbcfg_data_t usbcfg; ++ hwcfg2_data_t hwcfg2; ++ hprt0_data_t hprt0; ++ int clock = 60; // default value ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ hwcfg2.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2); ++ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); ++ if (!usbcfg.b.physel && usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif) ++ clock = 60; ++ if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 3) ++ clock = 48; ++ if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel && ++ !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif) ++ clock = 30; ++ if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel && ++ !usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif) ++ clock = 60; ++ if (usbcfg.b.phylpwrclksel && !usbcfg.b.physel && ++ !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif) ++ clock = 48; ++ if (usbcfg.b.physel && !usbcfg.b.phyif && hwcfg2.b.fs_phy_type == 2) ++ clock = 48; ++ if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 1) ++ clock = 48; ++ if (hprt0.b.prtspd == 0) ++ /* High speed case */ ++ return 125 * clock - 1; ++ else ++ /* FS/LS case */ ++ return 1000 * clock - 1; ++} ++ ++/** ++ * This function reads a setup packet from the Rx FIFO into the destination ++ * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl) ++ * Interrupt routine when a SETUP packet has been received in Slave mode. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dest Destination buffer for packet data. ++ */ ++void dwc_otg_read_setup_packet(dwc_otg_core_if_t * core_if, uint32_t * dest) ++{ ++ device_grxsts_data_t status; ++ /* Get the 8 bytes of a setup transaction data */ ++ ++ /* Pop 2 DWORDS off the receive data FIFO into memory */ ++ dest[0] = DWC_READ_REG32(core_if->data_fifo[0]); ++ dest[1] = DWC_READ_REG32(core_if->data_fifo[0]); ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ status.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->grxstsp); ++ DWC_DEBUGPL(DBG_ANY, ++ "EP:%d BCnt:%d " "pktsts:%x Frame:%d(0x%0x)\n", ++ status.b.epnum, status.b.bcnt, status.b.pktsts, ++ status.b.fn, status.b.fn); ++ } ++} ++ ++/** ++ * This function enables EP0 OUT to receive SETUP packets and configures EP0 ++ * IN for transmitting packets. It is normally called when the ++ * "Enumeration Done" interrupt occurs. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP0 data. ++ */ ++void dwc_otg_ep0_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dsts_data_t dsts; ++ depctl_data_t diepctl; ++ depctl_data_t doepctl; ++ dctl_data_t dctl = {.d32 = 0 }; ++ ++ ep->stp_rollover = 0; ++ /* Read the Device Status and Endpoint 0 Control registers */ ++ dsts.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dsts); ++ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl); ++ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl); ++ ++ /* Set the MPS of the IN EP based on the enumeration speed */ ++ switch (dsts.b.enumspd) { ++ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: ++ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: ++ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: ++ diepctl.b.mps = DWC_DEP0CTL_MPS_64; ++ break; ++ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: ++ diepctl.b.mps = DWC_DEP0CTL_MPS_8; ++ break; ++ } ++ ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); ++ ++ /* Enable OUT EP for receive */ ++ if (core_if->snpsid <= OTG_CORE_REV_2_94a) { ++ doepctl.b.epena = 1; ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); ++ } ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n", ++ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl)); ++ DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n", ++ DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl)); ++#endif ++ dctl.b.cgnpinnak = 1; ++ ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ DWC_DEBUGPL(DBG_PCDV, "dctl=%0x\n", ++ DWC_READ_REG32(&dev_if->dev_global_regs->dctl)); ++ ++} ++ ++/** ++ * This function activates an EP. The Device EP control register for ++ * the EP is configured as defined in the ep structure. Note: This ++ * function is not used for EP0. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to activate. ++ */ ++void dwc_otg_ep_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ depctl_data_t depctl; ++ volatile uint32_t *addr; ++ daint_data_t daintmsk = {.d32 = 0 }; ++ dcfg_data_t dcfg; ++ uint8_t i; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num, ++ (ep->is_in ? "IN" : "OUT")); ++ ++#ifdef DWC_UTE_PER_IO ++ ep->xiso_frame_num = 0xFFFFFFFF; ++ ep->xiso_active_xfers = 0; ++ ep->xiso_queued_xfers = 0; ++#endif ++ /* Read DEPCTLn register */ ++ if (ep->is_in == 1) { ++ addr = &dev_if->in_ep_regs[ep->num]->diepctl; ++ daintmsk.ep.in = 1 << ep->num; ++ } else { ++ addr = &dev_if->out_ep_regs[ep->num]->doepctl; ++ daintmsk.ep.out = 1 << ep->num; ++ } ++ ++ /* If the EP is already active don't change the EP Control ++ * register. */ ++ depctl.d32 = DWC_READ_REG32(addr); ++ if (!depctl.b.usbactep) { ++ depctl.b.mps = ep->maxpacket; ++ depctl.b.eptype = ep->type; ++ depctl.b.txfnum = ep->tx_fifo_num; ++ ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ depctl.b.setd0pid = 1; // ??? ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ depctl.b.usbactep = 1; ++ ++ /* Update nextep_seq array and EPMSCNT in DCFG*/ ++ if (!(depctl.b.eptype & 1) && (ep->is_in == 1)) { // NP IN EP ++ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ if (core_if->nextep_seq[i] == core_if->first_in_nextep_seq) ++ break; ++ } ++ core_if->nextep_seq[i] = ep->num; ++ core_if->nextep_seq[ep->num] = core_if->first_in_nextep_seq; ++ depctl.b.nextep = core_if->nextep_seq[ep->num]; ++ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.epmscnt++; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", ++ __func__, core_if->first_in_nextep_seq); ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_DEBUGPL(DBG_PCDV, "%2d\n", ++ core_if->nextep_seq[i]); ++ } ++ ++ } ++ ++ ++ DWC_WRITE_REG32(addr, depctl.d32); ++ DWC_DEBUGPL(DBG_PCDV, "DEPCTL=%08x\n", DWC_READ_REG32(addr)); ++ } ++ ++ /* Enable the Interrupt for this EP */ ++ if (core_if->multiproc_int_enable) { ++ if (ep->is_in == 1) { ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ diepmsk.b.xfercompl = 1; ++ diepmsk.b.timeout = 1; ++ diepmsk.b.epdisabled = 1; ++ diepmsk.b.ahberr = 1; ++ diepmsk.b.intknepmis = 1; ++ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) ++ diepmsk.b.intknepmis = 0; ++ diepmsk.b.txfifoundrn = 1; //????? ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ diepmsk.b.nak = 1; ++ } ++ ++ ++ ++/* ++ if (core_if->dma_desc_enable) { ++ diepmsk.b.bna = 1; ++ } ++*/ ++/* ++ if (core_if->dma_enable) { ++ doepmsk.b.nak = 1; ++ } ++*/ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs-> ++ diepeachintmsk[ep->num], diepmsk.d32); ++ ++ } else { ++ doepmsk_data_t doepmsk = {.d32 = 0 }; ++ doepmsk.b.xfercompl = 1; ++ doepmsk.b.ahberr = 1; ++ doepmsk.b.epdisabled = 1; ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) ++ doepmsk.b.outtknepdis = 1; ++ ++/* ++ ++ if (core_if->dma_desc_enable) { ++ doepmsk.b.bna = 1; ++ } ++*/ ++/* ++ doepmsk.b.babble = 1; ++ doepmsk.b.nyet = 1; ++ doepmsk.b.nak = 1; ++*/ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs-> ++ doepeachintmsk[ep->num], doepmsk.d32); ++ } ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->deachintmsk, ++ 0, daintmsk.d32); ++ } else { ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (ep->is_in) { ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ diepmsk.b.nak = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32); ++ } else { ++ doepmsk_data_t doepmsk = {.d32 = 0 }; ++ doepmsk.b.outtknepdis = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->doepmsk, 0, doepmsk.d32); ++ } ++ } ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->daintmsk, ++ 0, daintmsk.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "DAINTMSK=%0x\n", ++ DWC_READ_REG32(&dev_if->dev_global_regs->daintmsk)); ++ ++ ep->stall_clear_flag = 0; ++ ++ return; ++} ++ ++/** ++ * This function deactivates an EP. This is done by clearing the USB Active ++ * EP bit in the Device EP control register. Note: This function is not used ++ * for EP0. EP0 cannot be deactivated. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to deactivate. ++ */ ++void dwc_otg_ep_deactivate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ daint_data_t daintmsk = {.d32 = 0 }; ++ dcfg_data_t dcfg; ++ uint8_t i = 0; ++ ++#ifdef DWC_UTE_PER_IO ++ ep->xiso_frame_num = 0xFFFFFFFF; ++ ep->xiso_active_xfers = 0; ++ ep->xiso_queued_xfers = 0; ++#endif ++ ++ /* Read DEPCTLn register */ ++ if (ep->is_in == 1) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ daintmsk.ep.in = 1 << ep->num; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ daintmsk.ep.out = 1 << ep->num; ++ } ++ ++ depctl.d32 = DWC_READ_REG32(addr); ++ ++ depctl.b.usbactep = 0; ++ ++ /* Update nextep_seq array and EPMSCNT in DCFG*/ ++ if (!(depctl.b.eptype & 1) && ep->is_in == 1) { // NP EP IN ++ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ if (core_if->nextep_seq[i] == ep->num) ++ break; ++ } ++ core_if->nextep_seq[i] = core_if->nextep_seq[ep->num]; ++ if (core_if->first_in_nextep_seq == ep->num) ++ core_if->first_in_nextep_seq = i; ++ core_if->nextep_seq[ep->num] = 0xff; ++ depctl.b.nextep = 0; ++ dcfg.d32 = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ dcfg.b.epmscnt--; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, ++ dcfg.d32); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", ++ __func__, core_if->first_in_nextep_seq); ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]); ++ } ++ } ++ ++ if (ep->is_in == 1) ++ depctl.b.txfnum = 0; ++ ++ if (core_if->dma_desc_enable) ++ depctl.b.epdis = 1; ++ ++ DWC_WRITE_REG32(addr, depctl.d32); ++ depctl.d32 = DWC_READ_REG32(addr); ++ if (core_if->dma_enable && ep->type == DWC_OTG_EP_TYPE_ISOC ++ && depctl.b.epena) { ++ depctl_data_t depctl = {.d32 = 0}; ++ if (ep->is_in) { ++ diepint_data_t diepint = {.d32 = 0}; ++ ++ depctl.b.snak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ diepctl, depctl.d32); ++ do { ++ dwc_udelay(10); ++ diepint.d32 = ++ DWC_READ_REG32(&core_if-> ++ dev_if->in_ep_regs[ep->num]-> ++ diepint); ++ } while (!diepint.b.inepnakeff); ++ diepint.b.inepnakeff = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ diepint, diepint.d32); ++ depctl.d32 = 0; ++ depctl.b.epdis = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ diepctl, depctl.d32); ++ do { ++ dwc_udelay(10); ++ diepint.d32 = ++ DWC_READ_REG32(&core_if-> ++ dev_if->in_ep_regs[ep->num]-> ++ diepint); ++ } while (!diepint.b.epdisabled); ++ diepint.b.epdisabled = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ diepint, diepint.d32); ++ } else { ++ dctl_data_t dctl = {.d32 = 0}; ++ gintmsk_data_t gintsts = {.d32 = 0}; ++ doepint_data_t doepint = {.d32 = 0}; ++ dctl.b.sgoutnak = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ dctl, 0, dctl.d32); ++ do { ++ dwc_udelay(10); ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ } while (!gintsts.b.goutnakeff); ++ gintsts.d32 = 0; ++ gintsts.b.goutnakeff = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ depctl.d32 = 0; ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepctl, depctl.d32); ++ do ++ { ++ dwc_udelay(10); ++ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->num]->doepint); ++ } while (!doepint.b.epdisabled); ++ ++ doepint.b.epdisabled = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepint, doepint.d32); ++ ++ dctl.d32 = 0; ++ dctl.b.cgoutnak = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } ++ } ++ ++ /* Disable the Interrupt for this EP */ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->deachintmsk, ++ daintmsk.d32, 0); ++ ++ if (ep->is_in == 1) { ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> ++ diepeachintmsk[ep->num], 0); ++ } else { ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[ep->num], 0); ++ } ++ } else { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->daintmsk, ++ daintmsk.d32, 0); ++ } ++ ++} ++ ++/** ++ * This function initializes dma descriptor chain. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++static void init_dma_desc_chain(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ uint32_t offset; ++ uint32_t xfer_est; ++ int i; ++ unsigned maxxfer_local, total_len; ++ ++ if (!ep->is_in && ep->type == DWC_OTG_EP_TYPE_INTR && ++ (ep->maxpacket%4)) { ++ maxxfer_local = ep->maxpacket; ++ total_len = ep->xfer_len; ++ } else { ++ maxxfer_local = ep->maxxfer; ++ total_len = ep->total_len; ++ } ++ ++ ep->desc_cnt = (total_len / maxxfer_local) + ++ ((total_len % maxxfer_local) ? 1 : 0); ++ ++ if (!ep->desc_cnt) ++ ep->desc_cnt = 1; ++ ++ if (ep->desc_cnt > MAX_DMA_DESC_CNT) ++ ep->desc_cnt = MAX_DMA_DESC_CNT; ++ ++ dma_desc = ep->desc_addr; ++ if (maxxfer_local == ep->maxpacket) { ++ if ((total_len % maxxfer_local) && ++ (total_len/maxxfer_local < MAX_DMA_DESC_CNT)) { ++ xfer_est = (ep->desc_cnt - 1) * maxxfer_local + ++ (total_len % maxxfer_local); ++ } else ++ xfer_est = ep->desc_cnt * maxxfer_local; ++ } else ++ xfer_est = total_len; ++ offset = 0; ++ for (i = 0; i < ep->desc_cnt; ++i) { ++ /** DMA Descriptor Setup */ ++ if (xfer_est > maxxfer_local) { ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 0; ++ dma_desc->status.b.ioc = 0; ++ dma_desc->status.b.sp = 0; ++ dma_desc->status.b.bytes = maxxfer_local; ++ dma_desc->buf = ep->dma_addr + offset; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ xfer_est -= maxxfer_local; ++ offset += maxxfer_local; ++ } else { ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ if (ep->is_in) { ++ dma_desc->status.b.sp = ++ (xfer_est % ++ ep->maxpacket) ? 1 : ((ep-> ++ sent_zlp) ? 1 : 0); ++ dma_desc->status.b.bytes = xfer_est; ++ } else { ++ if (maxxfer_local == ep->maxpacket) ++ dma_desc->status.b.bytes = xfer_est; ++ else ++ dma_desc->status.b.bytes = ++ xfer_est + ((4 - (xfer_est & 0x3)) & 0x3); ++ } ++ ++ dma_desc->buf = ep->dma_addr + offset; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ } ++ dma_desc++; ++ } ++} ++/** ++ * This function is called when to write ISOC data into appropriate dedicated ++ * periodic FIFO. ++ */ ++static int32_t write_isoc_tx_fifo(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ dtxfsts_data_t txstatus = {.d32 = 0 }; ++ uint32_t len = 0; ++ int epnum = dwc_ep->num; ++ int dwords; ++ ++ DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum); ++ ++ ep_regs = core_if->dev_if->in_ep_regs[epnum]; ++ ++ len = dwc_ep->xfer_len - dwc_ep->xfer_count; ++ ++ if (len > dwc_ep->maxpacket) { ++ len = dwc_ep->maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32); ++ ++ while (txstatus.b.txfspcavail > dwords && ++ dwc_ep->xfer_count < dwc_ep->xfer_len && dwc_ep->xfer_len != 0) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, dwc_ep, 0); ++ ++ len = dwc_ep->xfer_len - dwc_ep->xfer_count; ++ if (len > dwc_ep->maxpacket) { ++ len = dwc_ep->maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ txstatus.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum, ++ txstatus.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts)); ++ ++ return 1; ++} ++/** ++ * This function does the setup for a data transfer for an EP and ++ * starts the transfer. For an IN transfer, the packets will be ++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, ++ * the packets are unloaded from the Rx FIFO in the ISR. the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++ ++void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ deptsiz_data_t deptsiz; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); ++ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " ++ "xfer_buff=%p start_xfer_buff=%p, total_len = %d\n", ++ ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len, ++ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff, ++ ep->total_len); ++ /* IN endpoint */ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[ep->num]; ++ ++ gnptxsts_data_t gtxstatus; ++ ++ gtxstatus.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); ++ ++ if (core_if->en_multiple_tx_fifo == 0 ++ && gtxstatus.b.nptxqspcavail == 0 && !core_if->dma_enable) { ++#ifdef DEBUG ++ DWC_PRINTF("TX Queue Full (0x%0x)\n", gtxstatus.d32); ++#endif ++ return; ++ } ++ ++ depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl)); ++ deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz)); ++ ++ if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT) ++ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? ++ ep->maxxfer : (ep->total_len - ep->xfer_len); ++ else ++ ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len - ep->xfer_len)) ? ++ MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len); ++ ++ ++ /* Zero Length Packet? */ ++ if ((ep->xfer_len - ep->xfer_count) == 0) { ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 1; ++ } else { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - ep->xfer_count - 1 + ++ ep->maxpacket) / ep->maxpacket; ++ if (deptsiz.b.pktcnt > MAX_PKT_CNT) { ++ deptsiz.b.pktcnt = MAX_PKT_CNT; ++ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; ++ } ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) ++ deptsiz.b.mc = deptsiz.b.pktcnt; ++ } ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ if (ep->type != DWC_OTG_EP_TYPE_ISOC) ++ deptsiz.b.mc = 1; ++ DWC_WRITE_REG32(&in_regs->dieptsiz, ++ deptsiz.d32); ++ DWC_WRITE_REG32(&(in_regs->diepdma), ++ (uint32_t) ep->dma_addr); ++ } else { ++#ifdef DWC_UTE_CFI ++ /* The descriptor chain should be already initialized by now */ ++ if (ep->buff_mode != BM_STANDARD) { ++ DWC_WRITE_REG32(&in_regs->diepdma, ++ ep->descs_dma_addr); ++ } else { ++#endif ++ init_dma_desc_chain(core_if, ep); ++ /** DIEPDMAn Register write */ ++ DWC_WRITE_REG32(&in_regs->diepdma, ++ ep->dma_desc_addr); ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ } ++ } else { ++ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); ++ if (ep->type != DWC_OTG_EP_TYPE_ISOC) { ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, ++ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, ++ * the data will be written into the fifo by the ISR. ++ */ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32 ++ (&core_if->core_global_regs->gintmsk, ++ intr_mask.d32, intr_mask.d32); ++ } else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if (ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk = 1 << ep->num; ++ DWC_MODIFY_REG32 ++ (&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ ++ } ++ } ++ } else { ++ write_isoc_tx_fifo(core_if, ep); ++ } ++ } ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) ++ depctl.b.nextep = core_if->nextep_seq[ep->num]; ++ ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ dsts_data_t dsts = {.d32 = 0}; ++ if (ep->bInterval == 1) { ++ dsts.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->dsts); ++ ep->frame_num = dsts.b.soffn + ep->bInterval; ++ if (ep->frame_num > 0x3FFF) { ++ ep->frm_overrun = 1; ++ ep->frame_num &= 0x3FFF; ++ } else ++ ep->frm_overrun = 0; ++ if (ep->frame_num & 0x1) { ++ depctl.b.setd1pid = 1; ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ } ++ } ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); ++ ++ } else { ++ /* OUT endpoint */ ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[ep->num]; ++ ++ depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl)); ++ deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz)); ++ ++ if (!core_if->dma_desc_enable) { ++ if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT) ++ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? ++ ep->maxxfer : (ep->total_len - ep->xfer_len); ++ else ++ ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len ++ - ep->xfer_len)) ? MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len); ++ } ++ ++ /* Program the transfer size and packet count as follows: ++ * ++ * pktcnt = N ++ * xfersize = N * maxpacket ++ */ ++ if ((ep->xfer_len - ep->xfer_count) == 0) { ++ /* Zero Length Packet */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ } else { ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - ep->xfer_count + ++ (ep->maxpacket - 1)) / ep->maxpacket; ++ if (deptsiz.b.pktcnt > MAX_PKT_CNT) { ++ deptsiz.b.pktcnt = MAX_PKT_CNT; ++ } ++ if (!core_if->dma_desc_enable) { ++ ep->xfer_len = ++ deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count; ++ } ++ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n", ++ ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, ++ deptsiz.d32); ++ ++ DWC_WRITE_REG32(&(out_regs->doepdma), ++ (uint32_t) ep->dma_addr); ++ } else { ++#ifdef DWC_UTE_CFI ++ /* The descriptor chain should be already initialized by now */ ++ if (ep->buff_mode != BM_STANDARD) { ++ DWC_WRITE_REG32(&out_regs->doepdma, ++ ep->descs_dma_addr); ++ } else { ++#endif ++ /** This is used for interrupt out transfers*/ ++ if (!ep->xfer_len) ++ ep->xfer_len = ep->total_len; ++ init_dma_desc_chain(core_if, ep); ++ ++ if (core_if->core_params->dev_out_nak) { ++ if (ep->type == DWC_OTG_EP_TYPE_BULK) { ++ deptsiz.b.pktcnt = (ep->total_len + ++ (ep->maxpacket - 1)) / ep->maxpacket; ++ deptsiz.b.xfersize = ep->total_len; ++ /* Remember initial value of doeptsiz */ ++ core_if->start_doeptsiz_val[ep->num] = deptsiz.d32; ++ DWC_WRITE_REG32(&out_regs->doeptsiz, ++ deptsiz.d32); ++ } ++ } ++ /** DOEPDMAn Register write */ ++ DWC_WRITE_REG32(&out_regs->doepdma, ++ ep->dma_desc_addr); ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ } ++ } else { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); ++ } ++ ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ dsts_data_t dsts = {.d32 = 0}; ++ if (ep->bInterval == 1) { ++ dsts.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->dsts); ++ ep->frame_num = dsts.b.soffn + ep->bInterval; ++ if (ep->frame_num > 0x3FFF) { ++ ep->frm_overrun = 1; ++ ep->frame_num &= 0x3FFF; ++ } else ++ ep->frm_overrun = 0; ++ ++ if (ep->frame_num & 0x1) { ++ depctl.b.setd1pid = 1; ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ } ++ } ++ ++ /* EP enable */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ ++ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); ++ ++ DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n", ++ DWC_READ_REG32(&out_regs->doepctl), ++ DWC_READ_REG32(&out_regs->doeptsiz)); ++ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n", ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs-> ++ daintmsk), ++ DWC_READ_REG32(&core_if->core_global_regs-> ++ gintmsk)); ++ ++ /* Timer is scheduling only for out bulk transfers for ++ * "Device DDMA OUT NAK Enhancement" feature to inform user ++ * about received data payload in case of timeout ++ */ ++ if (core_if->core_params->dev_out_nak) { ++ if (ep->type == DWC_OTG_EP_TYPE_BULK) { ++ core_if->ep_xfer_info[ep->num].core_if = core_if; ++ core_if->ep_xfer_info[ep->num].ep = ep; ++ core_if->ep_xfer_info[ep->num].state = 1; ++ ++ /* Start a timer for this transfer. */ ++ DWC_TIMER_SCHEDULE(core_if->ep_xfer_timer[ep->num], 10000); ++ } ++ } ++ } ++} ++ ++/** ++ * This function setup a zero length transfer in Buffer DMA and ++ * Slave modes for usb requests with zero field set ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ ++ depctl_data_t depctl; ++ deptsiz_data_t deptsiz; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); ++ DWC_PRINTF("zero length transfer is called\n"); ++ ++ /* IN endpoint */ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[ep->num]; ++ ++ depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl)); ++ deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz)); ++ ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 1; ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ deptsiz.b.mc = 1; ++ DWC_WRITE_REG32(&in_regs->dieptsiz, ++ deptsiz.d32); ++ DWC_WRITE_REG32(&(in_regs->diepdma), ++ (uint32_t) ep->dma_addr); ++ } ++ } else { ++ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, ++ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, ++ * the data will be written into the fifo by the ISR. ++ */ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gintmsk, ++ intr_mask.d32, intr_mask.d32); ++ } else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if (ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk = 1 << ep->num; ++ DWC_MODIFY_REG32(&core_if-> ++ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ } ++ } ++ } ++ ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) ++ depctl.b.nextep = core_if->nextep_seq[ep->num]; ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); ++ ++ } else { ++ /* OUT endpoint */ ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[ep->num]; ++ ++ depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl)); ++ deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz)); ++ ++ /* Zero Length Packet */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, ++ deptsiz.d32); ++ ++ DWC_WRITE_REG32(&(out_regs->doepdma), ++ (uint32_t) ep->dma_addr); ++ } ++ } else { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); ++ } ++ ++ /* EP enable */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ ++ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); ++ ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for EP0 and starts ++ * the transfer. For an IN transfer, the packets will be loaded into ++ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are ++ * unloaded from the Rx FIFO in the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP0 data. ++ */ ++void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ deptsiz0_data_t deptsiz; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ ++ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " ++ "xfer_buff=%p start_xfer_buff=%p \n", ++ ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len, ++ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff); ++ ++ ep->total_len = ep->xfer_len; ++ ++ /* IN endpoint */ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[0]; ++ ++ gnptxsts_data_t gtxstatus; ++ ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl); ++ if (depctl.b.epena) ++ return; ++ } ++ ++ gtxstatus.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); ++ ++ /* If dedicated FIFO every time flush fifo before enable ep*/ ++ if (core_if->en_multiple_tx_fifo && core_if->snpsid >= OTG_CORE_REV_3_00a) ++ dwc_otg_flush_tx_fifo(core_if, ep->tx_fifo_num); ++ ++ if (core_if->en_multiple_tx_fifo == 0 ++ && gtxstatus.b.nptxqspcavail == 0 ++ && !core_if->dma_enable) { ++#ifdef DEBUG ++ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); ++ DWC_DEBUGPL(DBG_PCD, "DIEPCTL0=%0x\n", ++ DWC_READ_REG32(&in_regs->diepctl)); ++ DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n", ++ deptsiz.d32, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ DWC_PRINTF("TX Queue or FIFO Full (0x%0x)\n", ++ gtxstatus.d32); ++#endif ++ return; ++ } ++ ++ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl); ++ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); ++ ++ /* Zero Length Packet? */ ++ if (ep->xfer_len == 0) { ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 1; ++ } else { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ if (ep->xfer_len > ep->maxpacket) { ++ ep->xfer_len = ep->maxpacket; ++ deptsiz.b.xfersize = ep->maxpacket; ++ } else { ++ deptsiz.b.xfersize = ep->xfer_len; ++ } ++ deptsiz.b.pktcnt = 1; ++ ++ } ++ DWC_DEBUGPL(DBG_PCDV, ++ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", ++ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, ++ deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ DWC_WRITE_REG32(&in_regs->dieptsiz, ++ deptsiz.d32); ++ ++ DWC_WRITE_REG32(&(in_regs->diepdma), ++ (uint32_t) ep->dma_addr); ++ } else { ++ dma_desc = core_if->dev_if->in_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.sp = ++ (ep->xfer_len == ep->maxpacket) ? 0 : 1; ++ dma_desc->status.b.bytes = ep->xfer_len; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DIEPDMA0 Register write */ ++ DWC_WRITE_REG32(&in_regs->diepdma, ++ core_if-> ++ dev_if->dma_in_desc_addr); ++ } ++ } else { ++ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); ++ } ++ ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) ++ depctl.b.nextep = core_if->nextep_seq[ep->num]; ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); ++ ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, the ++ * data will be written into the fifo by the ISR. ++ */ ++ if (!core_if->dma_enable) { ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gintmsk, ++ intr_mask.d32, intr_mask.d32); ++ } else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if (ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk |= 1 << ep->num; ++ DWC_MODIFY_REG32(&core_if-> ++ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ } ++ } ++ } ++ } else { ++ /* OUT endpoint */ ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[0]; ++ ++ depctl.d32 = DWC_READ_REG32(&out_regs->doepctl); ++ deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz); ++ ++ /* Program the transfer size and packet count as follows: ++ * xfersize = N * (maxpacket + 4 - (maxpacket % 4)) ++ * pktcnt = N */ ++ /* Zero Length Packet */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) ++ deptsiz.b.supcnt = 3; ++ ++ DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n", ++ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, ++ deptsiz.d32); ++ ++ DWC_WRITE_REG32(&(out_regs->doepdma), ++ (uint32_t) ep->dma_addr); ++ } else { ++ dma_desc = core_if->dev_if->out_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ dma_desc->status.b.mtrf = 0; ++ dma_desc->status.b.sr = 0; ++ } ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.bytes = ep->maxpacket; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DOEPDMA0 Register write */ ++ DWC_WRITE_REG32(&out_regs->doepdma, ++ core_if->dev_if-> ++ dma_out_desc_addr); ++ } ++ } else { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); ++ } ++ ++ /* EP enable */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&(out_regs->doepctl), depctl.d32); ++ } ++} ++ ++/** ++ * This function continues control IN transfers started by ++ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a ++ * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one ++ * bit for the packet count. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP0 data. ++ */ ++void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ deptsiz0_data_t deptsiz; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[0]; ++ gnptxsts_data_t tx_status = {.d32 = 0 }; ++ ++ tx_status.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); ++ /** @todo Should there be check for room in the Tx ++ * Status Queue. If not remove the code above this comment. */ ++ ++ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl); ++ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); ++ ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ ++ if (core_if->dma_desc_enable == 0) { ++ deptsiz.b.xfersize = ++ (ep->total_len - ep->xfer_count) > ++ ep->maxpacket ? ep->maxpacket : (ep->total_len - ++ ep->xfer_count); ++ deptsiz.b.pktcnt = 1; ++ if (core_if->dma_enable == 0) { ++ ep->xfer_len += deptsiz.b.xfersize; ++ } else { ++ ep->xfer_len = deptsiz.b.xfersize; ++ } ++ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); ++ } else { ++ ep->xfer_len = ++ (ep->total_len - ep->xfer_count) > ++ ep->maxpacket ? ep->maxpacket : (ep->total_len - ++ ep->xfer_count); ++ ++ dma_desc = core_if->dev_if->in_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.sp = ++ (ep->xfer_len == ep->maxpacket) ? 0 : 1; ++ dma_desc->status.b.bytes = ep->xfer_len; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DIEPDMA0 Register write */ ++ DWC_WRITE_REG32(&in_regs->diepdma, ++ core_if->dev_if->dma_in_desc_addr); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", ++ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, ++ deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { ++ if (core_if->dma_desc_enable == 0) ++ DWC_WRITE_REG32(&(in_regs->diepdma), ++ (uint32_t) ep->dma_addr); ++ } ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) ++ depctl.b.nextep = core_if->nextep_seq[ep->num]; ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); ++ ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, the ++ * data will be written into the fifo by the ISR. ++ */ ++ if (!core_if->dma_enable) { ++ if (core_if->en_multiple_tx_fifo == 0) { ++ /* First clear it from GINTSTS */ ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gintmsk, ++ intr_mask.d32, intr_mask.d32); ++ ++ } else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if (ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk |= 1 << ep->num; ++ DWC_MODIFY_REG32(&core_if-> ++ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ } ++ } ++ } ++ } else { ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[0]; ++ ++ depctl.d32 = DWC_READ_REG32(&out_regs->doepctl); ++ deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz); ++ ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ ++ if (core_if->dma_desc_enable == 0) { ++ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); ++ } else { ++ dma_desc = core_if->dev_if->out_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.bytes = ep->maxpacket; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DOEPDMA0 Register write */ ++ DWC_WRITE_REG32(&out_regs->doepdma, ++ core_if->dev_if->dma_out_desc_addr); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", ++ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, ++ deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { ++ if (core_if->dma_desc_enable == 0) ++ DWC_WRITE_REG32(&(out_regs->doepdma), ++ (uint32_t) ep->dma_addr); ++ ++ } ++ ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); ++ ++ } ++} ++ ++#ifdef DEBUG ++void dump_msg(const u8 * buf, unsigned int length) ++{ ++ unsigned int start, num, i; ++ char line[52], *p; ++ ++ if (length >= 512) ++ return; ++ start = 0; ++ while (length > 0) { ++ num = length < 16u ? length : 16u; ++ p = line; ++ for (i = 0; i < num; ++i) { ++ if (i == 8) ++ *p++ = ' '; ++ DWC_SPRINTF(p, " %02x", buf[i]); ++ p += 3; ++ } ++ *p = 0; ++ DWC_PRINTF("%6x: %s\n", start, line); ++ buf += num; ++ start += num; ++ length -= num; ++ } ++} ++#else ++static inline void dump_msg(const u8 * buf, unsigned int length) ++{ ++} ++#endif ++ ++/** ++ * This function writes a packet into the Tx FIFO associated with the ++ * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For ++ * periodic EPs the periodic Tx FIFO associated with the EP is written ++ * with all packets for the next micro-frame. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to write packet for. ++ * @param dma Indicates if DMA is being used. ++ */ ++void dwc_otg_ep_write_packet(dwc_otg_core_if_t * core_if, dwc_ep_t * ep, ++ int dma) ++{ ++ /** ++ * The buffer is padded to DWORD on a per packet basis in ++ * slave/dma mode if the MPS is not DWORD aligned. The last ++ * packet, if short, is also padded to a multiple of DWORD. ++ * ++ * ep->xfer_buff always starts DWORD aligned in memory and is a ++ * multiple of DWORD in length ++ * ++ * ep->xfer_len can be any number of bytes ++ * ++ * ep->xfer_count is a multiple of ep->maxpacket until the last ++ * packet ++ * ++ * FIFO access is DWORD */ ++ ++ uint32_t i; ++ uint32_t byte_count; ++ uint32_t dword_count; ++ uint32_t *fifo; ++ uint32_t *data_buff = (uint32_t *) ep->xfer_buff; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, ++ ep); ++ if (ep->xfer_count >= ep->xfer_len) { ++ DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num); ++ return; ++ } ++ ++ /* Find the byte length of the packet either short packet or MPS */ ++ if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) { ++ byte_count = ep->xfer_len - ep->xfer_count; ++ } else { ++ byte_count = ep->maxpacket; ++ } ++ ++ /* Find the DWORD length, padded by extra bytes as neccessary if MPS ++ * is not a multiple of DWORD */ ++ dword_count = (byte_count + 3) / 4; ++ ++#ifdef VERBOSE ++ dump_msg(ep->xfer_buff, byte_count); ++#endif ++ ++ /**@todo NGS Where are the Periodic Tx FIFO addresses ++ * intialized? What should this be? */ ++ ++ fifo = core_if->data_fifo[ep->num]; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", ++ fifo, data_buff, *data_buff, byte_count); ++ ++ if (!dma) { ++ for (i = 0; i < dword_count; i++, data_buff++) { ++ DWC_WRITE_REG32(fifo, *data_buff); ++ } ++ } ++ ++ ep->xfer_count += byte_count; ++ ep->xfer_buff += byte_count; ++ ep->dma_addr += byte_count; ++} ++ ++/** ++ * Set the EP STALL. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to set the stall on. ++ */ ++void dwc_otg_ep_set_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ volatile uint32_t *depctl_addr; ++ ++ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, ++ (ep->is_in ? "IN" : "OUT")); ++ ++ if (ep->is_in == 1) { ++ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); ++ depctl.d32 = DWC_READ_REG32(depctl_addr); ++ ++ /* set the disable and stall bits */ ++ if (depctl.b.epena) { ++ depctl.b.epdis = 1; ++ } ++ depctl.b.stall = 1; ++ DWC_WRITE_REG32(depctl_addr, depctl.d32); ++ } else { ++ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); ++ depctl.d32 = DWC_READ_REG32(depctl_addr); ++ ++ /* set the stall bit */ ++ depctl.b.stall = 1; ++ DWC_WRITE_REG32(depctl_addr, depctl.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr)); ++ ++ return; ++} ++ ++/** ++ * Clear the EP STALL. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to clear stall from. ++ */ ++void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl; ++ volatile uint32_t *depctl_addr; ++ ++ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, ++ (ep->is_in ? "IN" : "OUT")); ++ ++ if (ep->is_in == 1) { ++ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); ++ } else { ++ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); ++ } ++ ++ depctl.d32 = DWC_READ_REG32(depctl_addr); ++ ++ /* clear the stall bits */ ++ depctl.b.stall = 0; ++ ++ /* ++ * USB Spec 9.4.5: For endpoints using data toggle, regardless ++ * of whether an endpoint has the Halt feature set, a ++ * ClearFeature(ENDPOINT_HALT) request always results in the ++ * data toggle being reinitialized to DATA0. ++ */ ++ if (ep->type == DWC_OTG_EP_TYPE_INTR || ++ ep->type == DWC_OTG_EP_TYPE_BULK) { ++ depctl.b.setd0pid = 1; /* DATA0 */ ++ } ++ ++ DWC_WRITE_REG32(depctl_addr, depctl.d32); ++ DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr)); ++ return; ++} ++ ++/** ++ * This function reads a packet from the Rx FIFO into the destination ++ * buffer. To read SETUP data use dwc_otg_read_setup_packet. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dest Destination buffer for the packet. ++ * @param bytes Number of bytes to copy to the destination. ++ */ ++void dwc_otg_read_packet(dwc_otg_core_if_t * core_if, ++ uint8_t * dest, uint16_t bytes) ++{ ++ int i; ++ int word_count = (bytes + 3) / 4; ++ ++ volatile uint32_t *fifo = core_if->data_fifo[0]; ++ uint32_t *data_buff = (uint32_t *) dest; ++ ++ /** ++ * @todo Account for the case where _dest is not dword aligned. This ++ * requires reading data from the FIFO into a uint32_t temp buffer, ++ * then moving it into the data buffer. ++ */ ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__, ++ core_if, dest, bytes); ++ ++ for (i = 0; i < word_count; i++, data_buff++) { ++ *data_buff = DWC_READ_REG32(fifo); ++ } ++ ++ return; ++} ++ ++/** ++ * This functions reads the device registers and prints them ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ volatile uint32_t *addr; ++ ++ DWC_PRINTF("Device Global Registers\n"); ++ addr = &core_if->dev_if->dev_global_regs->dcfg; ++ DWC_PRINTF("DCFG @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->dctl; ++ DWC_PRINTF("DCTL @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->dsts; ++ DWC_PRINTF("DSTS @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->diepmsk; ++ DWC_PRINTF("DIEPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->doepmsk; ++ DWC_PRINTF("DOEPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->daint; ++ DWC_PRINTF("DAINT @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->daintmsk; ++ DWC_PRINTF("DAINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->dtknqr1; ++ DWC_PRINTF("DTKNQR1 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ if (core_if->hwcfg2.b.dev_token_q_depth > 6) { ++ addr = &core_if->dev_if->dev_global_regs->dtknqr2; ++ DWC_PRINTF("DTKNQR2 @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ ++ addr = &core_if->dev_if->dev_global_regs->dvbusdis; ++ DWC_PRINTF("DVBUSID @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ ++ addr = &core_if->dev_if->dev_global_regs->dvbuspulse; ++ DWC_PRINTF("DVBUSPULSE @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ ++ addr = &core_if->dev_if->dev_global_regs->dtknqr3_dthrctl; ++ DWC_PRINTF("DTKNQR3_DTHRCTL @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ ++ if (core_if->hwcfg2.b.dev_token_q_depth > 22) { ++ addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; ++ DWC_PRINTF("DTKNQR4 @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ ++ addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; ++ DWC_PRINTF("FIFOEMPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ ++ if (core_if->hwcfg2.b.multi_proc_int) { ++ ++ addr = &core_if->dev_if->dev_global_regs->deachint; ++ DWC_PRINTF("DEACHINT @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->dev_global_regs->deachintmsk; ++ DWC_PRINTF("DEACHINTMSK @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ ++ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ addr = ++ &core_if->dev_if-> ++ dev_global_regs->diepeachintmsk[i]; ++ DWC_PRINTF("DIEPEACHINTMSK[%d] @0x%08lX : 0x%08X\n", ++ i, (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ } ++ ++ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { ++ addr = ++ &core_if->dev_if-> ++ dev_global_regs->doepeachintmsk[i]; ++ DWC_PRINTF("DOEPEACHINTMSK[%d] @0x%08lX : 0x%08X\n", ++ i, (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ } ++ } ++ ++ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_PRINTF("Device IN EP %d Registers\n", i); ++ addr = &core_if->dev_if->in_ep_regs[i]->diepctl; ++ DWC_PRINTF("DIEPCTL @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->diepint; ++ DWC_PRINTF("DIEPINT @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->dieptsiz; ++ DWC_PRINTF("DIETSIZ @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->diepdma; ++ DWC_PRINTF("DIEPDMA @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->dtxfsts; ++ DWC_PRINTF("DTXFSTS @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->in_ep_regs[i]->diepdmab; ++ DWC_PRINTF("DIEPDMAB @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, 0 /*DWC_READ_REG32(addr) */ ); ++ } ++ ++ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { ++ DWC_PRINTF("Device OUT EP %d Registers\n", i); ++ addr = &core_if->dev_if->out_ep_regs[i]->doepctl; ++ DWC_PRINTF("DOEPCTL @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->out_ep_regs[i]->doepint; ++ DWC_PRINTF("DOEPINT @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->out_ep_regs[i]->doeptsiz; ++ DWC_PRINTF("DOETSIZ @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->dev_if->out_ep_regs[i]->doepdma; ++ DWC_PRINTF("DOEPDMA @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ if (core_if->dma_enable) { /* Don't access this register in SLAVE mode */ ++ addr = &core_if->dev_if->out_ep_regs[i]->doepdmab; ++ DWC_PRINTF("DOEPDMAB @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ ++ } ++} ++ ++/** ++ * This functions reads the SPRAM and prints its content ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_spram(dwc_otg_core_if_t * core_if) ++{ ++ volatile uint8_t *addr, *start_addr, *end_addr; ++ ++ DWC_PRINTF("SPRAM Data:\n"); ++ start_addr = (void *)core_if->core_global_regs; ++ DWC_PRINTF("Base Address: 0x%8lX\n", (unsigned long)start_addr); ++ start_addr += 0x00028000; ++ end_addr = (void *)core_if->core_global_regs; ++ end_addr += 0x000280e0; ++ ++ for (addr = start_addr; addr < end_addr; addr += 16) { ++ DWC_PRINTF ++ ("0x%8lX:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", ++ (unsigned long)addr, addr[0], addr[1], addr[2], addr[3], ++ addr[4], addr[5], addr[6], addr[7], addr[8], addr[9], ++ addr[10], addr[11], addr[12], addr[13], addr[14], addr[15] ++ ); ++ } ++ ++ return; ++} ++ ++/** ++ * This function reads the host registers and prints them ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_host_registers(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ volatile uint32_t *addr; ++ ++ DWC_PRINTF("Host Global Registers\n"); ++ addr = &core_if->host_if->host_global_regs->hcfg; ++ DWC_PRINTF("HCFG @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->host_global_regs->hfir; ++ DWC_PRINTF("HFIR @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->host_global_regs->hfnum; ++ DWC_PRINTF("HFNUM @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->host_global_regs->hptxsts; ++ DWC_PRINTF("HPTXSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->host_global_regs->haint; ++ DWC_PRINTF("HAINT @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->host_global_regs->haintmsk; ++ DWC_PRINTF("HAINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ if (core_if->dma_desc_enable) { ++ addr = &core_if->host_if->host_global_regs->hflbaddr; ++ DWC_PRINTF("HFLBADDR @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ ++ addr = core_if->host_if->hprt0; ++ DWC_PRINTF("HPRT0 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ ++ for (i = 0; i < core_if->core_params->host_channels; i++) { ++ DWC_PRINTF("Host Channel %d Specific Registers\n", i); ++ addr = &core_if->host_if->hc_regs[i]->hcchar; ++ DWC_PRINTF("HCCHAR @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hcsplt; ++ DWC_PRINTF("HCSPLT @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hcint; ++ DWC_PRINTF("HCINT @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hcintmsk; ++ DWC_PRINTF("HCINTMSK @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hctsiz; ++ DWC_PRINTF("HCTSIZ @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->host_if->hc_regs[i]->hcdma; ++ DWC_PRINTF("HCDMA @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ if (core_if->dma_desc_enable) { ++ addr = &core_if->host_if->hc_regs[i]->hcdmab; ++ DWC_PRINTF("HCDMAB @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ ++ } ++ return; ++} ++ ++/** ++ * This function reads the core global registers and prints them ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_global_registers(dwc_otg_core_if_t * core_if) ++{ ++ int i, ep_num; ++ volatile uint32_t *addr; ++ char *txfsiz; ++ ++ DWC_PRINTF("Core Global Registers\n"); ++ addr = &core_if->core_global_regs->gotgctl; ++ DWC_PRINTF("GOTGCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gotgint; ++ DWC_PRINTF("GOTGINT @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gahbcfg; ++ DWC_PRINTF("GAHBCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gusbcfg; ++ DWC_PRINTF("GUSBCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->grstctl; ++ DWC_PRINTF("GRSTCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gintsts; ++ DWC_PRINTF("GINTSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gintmsk; ++ DWC_PRINTF("GINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->grxstsr; ++ DWC_PRINTF("GRXSTSR @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->grxfsiz; ++ DWC_PRINTF("GRXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gnptxfsiz; ++ DWC_PRINTF("GNPTXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gnptxsts; ++ DWC_PRINTF("GNPTXSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gi2cctl; ++ DWC_PRINTF("GI2CCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gpvndctl; ++ DWC_PRINTF("GPVNDCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->ggpio; ++ DWC_PRINTF("GGPIO @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->guid; ++ DWC_PRINTF("GUID @0x%08lX : 0x%08X\n", ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gsnpsid; ++ DWC_PRINTF("GSNPSID @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->ghwcfg1; ++ DWC_PRINTF("GHWCFG1 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->ghwcfg2; ++ DWC_PRINTF("GHWCFG2 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->ghwcfg3; ++ DWC_PRINTF("GHWCFG3 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->ghwcfg4; ++ DWC_PRINTF("GHWCFG4 @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->glpmcfg; ++ DWC_PRINTF("GLPMCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gpwrdn; ++ DWC_PRINTF("GPWRDN @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->gdfifocfg; ++ DWC_PRINTF("GDFIFOCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ addr = &core_if->core_global_regs->adpctl; ++ DWC_PRINTF("ADPCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ dwc_otg_adp_read_reg(core_if)); ++ addr = &core_if->core_global_regs->hptxfsiz; ++ DWC_PRINTF("HPTXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ ep_num = core_if->hwcfg4.b.num_dev_perio_in_ep; ++ txfsiz = "DPTXFSIZ"; ++ } else { ++ ep_num = core_if->hwcfg4.b.num_in_eps; ++ txfsiz = "DIENPTXF"; ++ } ++ for (i = 0; i < ep_num; i++) { ++ addr = &core_if->core_global_regs->dtxfsiz[i]; ++ DWC_PRINTF("%s[%d] @0x%08lX : 0x%08X\n", txfsiz, i + 1, ++ (unsigned long)addr, DWC_READ_REG32(addr)); ++ } ++ addr = core_if->pcgcctl; ++ DWC_PRINTF("PCGCCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, ++ DWC_READ_REG32(addr)); ++} ++ ++/** ++ * Flush a Tx FIFO. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param num Tx FIFO to flush. ++ */ ++void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * core_if, const int num) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ volatile grstctl_t greset = {.d32 = 0 }; ++ int count = 0; ++ ++ DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "Flush Tx FIFO %d\n", num); ++ ++ greset.b.txfflsh = 1; ++ greset.b.txfnum = num; ++ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); ++ ++ do { ++ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); ++ if (++count > 10000) { ++ DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n", ++ __func__, greset.d32, ++ DWC_READ_REG32(&global_regs->gnptxsts)); ++ break; ++ } ++ dwc_udelay(1); ++ } while (greset.b.txfflsh == 1); ++ ++ /* Wait for 3 PHY Clocks */ ++ dwc_udelay(1); ++} ++ ++/** ++ * Flush Rx FIFO. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ volatile grstctl_t greset = {.d32 = 0 }; ++ int count = 0; ++ ++ DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "%s\n", __func__); ++ /* ++ * ++ */ ++ greset.b.rxfflsh = 1; ++ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); ++ ++ do { ++ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); ++ if (++count > 10000) { ++ DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, ++ greset.d32); ++ break; ++ } ++ dwc_udelay(1); ++ } while (greset.b.rxfflsh == 1); ++ ++ /* Wait for 3 PHY Clocks */ ++ dwc_udelay(1); ++} ++ ++/** ++ * Do core a soft reset of the core. Be careful with this because it ++ * resets all the internal state machines of the core. ++ */ ++void dwc_otg_core_reset(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ volatile grstctl_t greset = {.d32 = 0 }; ++ int count = 0; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s\n", __func__); ++ /* Wait for AHB master IDLE state. */ ++ do { ++ dwc_udelay(10); ++ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); ++ if (++count > 100000) { ++ DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__, ++ greset.d32); ++ return; ++ } ++ } ++ while (greset.b.ahbidle == 0); ++ ++ /* Core Soft Reset */ ++ count = 0; ++ greset.b.csftrst = 1; ++ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); ++ do { ++ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); ++ if (++count > 10000) { ++ DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", ++ __func__, greset.d32); ++ break; ++ } ++ dwc_udelay(1); ++ } ++ while (greset.b.csftrst == 1); ++ ++ /* Wait for 3 PHY Clocks */ ++ dwc_mdelay(100); ++} ++ ++uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if) ++{ ++ return (dwc_otg_mode(_core_if) != DWC_HOST_MODE); ++} ++ ++uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if) ++{ ++ return (dwc_otg_mode(_core_if) == DWC_HOST_MODE); ++} ++ ++/** ++ * Register HCD callbacks. The callbacks are used to start and stop ++ * the HCD for interrupt processing. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param cb the HCD callback structure. ++ * @param p pointer to be passed to callback function (usb_hcd*). ++ */ ++void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * core_if, ++ dwc_otg_cil_callbacks_t * cb, void *p) ++{ ++ core_if->hcd_cb = cb; ++ cb->p = p; ++} ++ ++/** ++ * Register PCD callbacks. The callbacks are used to start and stop ++ * the PCD for interrupt processing. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param cb the PCD callback structure. ++ * @param p pointer to be passed to callback function (pcd*). ++ */ ++void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * core_if, ++ dwc_otg_cil_callbacks_t * cb, void *p) ++{ ++ core_if->pcd_cb = cb; ++ cb->p = p; ++} ++ ++#ifdef DWC_EN_ISOC ++ ++/** ++ * This function writes isoc data per 1 (micro)frame into tx fifo ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void write_isoc_frame_data(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ dtxfsts_data_t txstatus = {.d32 = 0 }; ++ uint32_t len = 0; ++ uint32_t dwords; ++ ++ ep->xfer_len = ep->data_per_frame; ++ ep->xfer_count = 0; ++ ++ ep_regs = core_if->dev_if->in_ep_regs[ep->num]; ++ ++ len = ep->xfer_len - ep->xfer_count; ++ ++ if (len > ep->maxpacket) { ++ len = ep->maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32); ++ ++ while (txstatus.b.txfspcavail > dwords && ++ ep->xfer_count < ep->xfer_len && ep->xfer_len != 0) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, ep, 0); ++ ++ len = ep->xfer_len - ep->xfer_count; ++ if (len > ep->maxpacket) { ++ len = ep->maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ txstatus.d32 = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", ep->num, ++ txstatus.d32); ++ } ++} ++ ++/** ++ * This function initializes a descriptor chain for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep) ++{ ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dsts_data_t dsts = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ ++ if (ep->is_in) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ } ++ ++ ep->xfer_len = ep->data_per_frame; ++ ep->xfer_count = 0; ++ ep->xfer_buff = ep->cur_pkt_addr; ++ ep->dma_addr = ep->cur_pkt_dma_addr; ++ ++ if (ep->is_in) { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.xfersize = ep->xfer_len; ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; ++ deptsiz.b.mc = deptsiz.b.pktcnt; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, ++ deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ DWC_WRITE_REG32(& ++ (core_if->dev_if->in_ep_regs[ep->num]-> ++ diepdma), (uint32_t) ep->dma_addr); ++ } ++ } else { ++ deptsiz.b.pktcnt = ++ (ep->xfer_len + (ep->maxpacket - 1)) / ep->maxpacket; ++ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; ++ ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->num]->doeptsiz, deptsiz.d32); ++ ++ if (core_if->dma_enable) { ++ DWC_WRITE_REG32(& ++ (core_if->dev_if-> ++ out_ep_regs[ep->num]->doepdma), ++ (uint32_t) ep->dma_addr); ++ } ++ } ++ ++ /** Enable endpoint, clear nak */ ++ ++ depctl.d32 = 0; ++ if (ep->bInterval == 1) { ++ dsts.d32 = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ep->next_frame = dsts.b.soffn + ep->bInterval; ++ ++ if (ep->next_frame & 0x1) { ++ depctl.b.setd1pid = 1; ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ } else { ++ ep->next_frame += ep->bInterval; ++ ++ if (ep->next_frame & 0x1) { ++ depctl.b.setd1pid = 1; ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ } ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ ++ DWC_MODIFY_REG32(addr, 0, depctl.d32); ++ depctl.d32 = DWC_READ_REG32(addr); ++ ++ if (ep->is_in && core_if->dma_enable == 0) { ++ write_isoc_frame_data(core_if, ep); ++ } ++ ++} ++#endif /* DWC_EN_ISOC */ ++ ++static void dwc_otg_set_uninitialized(int32_t * p, int size) ++{ ++ int i; ++ for (i = 0; i < size; i++) { ++ p[i] = -1; ++ } ++} ++ ++static int dwc_otg_param_initialized(int32_t val) ++{ ++ return val != -1; ++} ++ ++static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if) ++{ ++ int i; ++ core_if->core_params = DWC_ALLOC(sizeof(*core_if->core_params)); ++ if (!core_if->core_params) { ++ return -DWC_E_NO_MEMORY; ++ } ++ dwc_otg_set_uninitialized((int32_t *) core_if->core_params, ++ sizeof(*core_if->core_params) / ++ sizeof(int32_t)); ++ DWC_PRINTF("Setting default values for core params\n"); ++ dwc_otg_set_param_otg_cap(core_if, dwc_param_otg_cap_default); ++ dwc_otg_set_param_dma_enable(core_if, dwc_param_dma_enable_default); ++ dwc_otg_set_param_dma_desc_enable(core_if, ++ dwc_param_dma_desc_enable_default); ++ dwc_otg_set_param_opt(core_if, dwc_param_opt_default); ++ dwc_otg_set_param_dma_burst_size(core_if, ++ dwc_param_dma_burst_size_default); ++ dwc_otg_set_param_host_support_fs_ls_low_power(core_if, ++ dwc_param_host_support_fs_ls_low_power_default); ++ dwc_otg_set_param_enable_dynamic_fifo(core_if, ++ dwc_param_enable_dynamic_fifo_default); ++ dwc_otg_set_param_data_fifo_size(core_if, ++ dwc_param_data_fifo_size_default); ++ dwc_otg_set_param_dev_rx_fifo_size(core_if, ++ dwc_param_dev_rx_fifo_size_default); ++ dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if, ++ dwc_param_dev_nperio_tx_fifo_size_default); ++ dwc_otg_set_param_host_rx_fifo_size(core_if, ++ dwc_param_host_rx_fifo_size_default); ++ dwc_otg_set_param_host_nperio_tx_fifo_size(core_if, ++ dwc_param_host_nperio_tx_fifo_size_default); ++ dwc_otg_set_param_host_perio_tx_fifo_size(core_if, ++ dwc_param_host_perio_tx_fifo_size_default); ++ dwc_otg_set_param_max_transfer_size(core_if, ++ dwc_param_max_transfer_size_default); ++ dwc_otg_set_param_max_packet_count(core_if, ++ dwc_param_max_packet_count_default); ++ dwc_otg_set_param_host_channels(core_if, ++ dwc_param_host_channels_default); ++ dwc_otg_set_param_dev_endpoints(core_if, ++ dwc_param_dev_endpoints_default); ++ dwc_otg_set_param_phy_type(core_if, dwc_param_phy_type_default); ++ dwc_otg_set_param_speed(core_if, dwc_param_speed_default); ++ dwc_otg_set_param_host_ls_low_power_phy_clk(core_if, ++ dwc_param_host_ls_low_power_phy_clk_default); ++ dwc_otg_set_param_phy_ulpi_ddr(core_if, dwc_param_phy_ulpi_ddr_default); ++ dwc_otg_set_param_phy_ulpi_ext_vbus(core_if, ++ dwc_param_phy_ulpi_ext_vbus_default); ++ dwc_otg_set_param_phy_utmi_width(core_if, ++ dwc_param_phy_utmi_width_default); ++ dwc_otg_set_param_ts_dline(core_if, dwc_param_ts_dline_default); ++ dwc_otg_set_param_i2c_enable(core_if, dwc_param_i2c_enable_default); ++ dwc_otg_set_param_ulpi_fs_ls(core_if, dwc_param_ulpi_fs_ls_default); ++ dwc_otg_set_param_en_multiple_tx_fifo(core_if, ++ dwc_param_en_multiple_tx_fifo_default); ++ for (i = 0; i < 15; i++) { ++ dwc_otg_set_param_dev_perio_tx_fifo_size(core_if, ++ dwc_param_dev_perio_tx_fifo_size_default, ++ i); ++ } ++ ++ for (i = 0; i < 15; i++) { ++ dwc_otg_set_param_dev_tx_fifo_size(core_if, ++ dwc_param_dev_tx_fifo_size_default, ++ i); ++ } ++ dwc_otg_set_param_thr_ctl(core_if, dwc_param_thr_ctl_default); ++ dwc_otg_set_param_mpi_enable(core_if, dwc_param_mpi_enable_default); ++ dwc_otg_set_param_pti_enable(core_if, dwc_param_pti_enable_default); ++ dwc_otg_set_param_lpm_enable(core_if, dwc_param_lpm_enable_default); ++ dwc_otg_set_param_ic_usb_cap(core_if, dwc_param_ic_usb_cap_default); ++ dwc_otg_set_param_tx_thr_length(core_if, ++ dwc_param_tx_thr_length_default); ++ dwc_otg_set_param_rx_thr_length(core_if, ++ dwc_param_rx_thr_length_default); ++ dwc_otg_set_param_ahb_thr_ratio(core_if, ++ dwc_param_ahb_thr_ratio_default); ++ dwc_otg_set_param_power_down(core_if, dwc_param_power_down_default); ++ dwc_otg_set_param_reload_ctl(core_if, dwc_param_reload_ctl_default); ++ dwc_otg_set_param_dev_out_nak(core_if, dwc_param_dev_out_nak_default); ++ dwc_otg_set_param_cont_on_bna(core_if, dwc_param_cont_on_bna_default); ++ dwc_otg_set_param_ahb_single(core_if, dwc_param_ahb_single_default); ++ dwc_otg_set_param_otg_ver(core_if, dwc_param_otg_ver_default); ++ dwc_otg_set_param_adp_enable(core_if, dwc_param_adp_enable_default); ++ DWC_PRINTF("Finished setting default values for core params\n"); ++ ++ return 0; ++} ++ ++uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->dma_enable; ++} ++ ++/* Checks if the parameter is outside of its valid range of values */ ++#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \ ++ (((_param_) < (_low_)) || \ ++ ((_param_) > (_high_))) ++ ++/* Parameter access functions */ ++int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int valid; ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 2)) { ++ DWC_WARN("Wrong value for otg_cap parameter\n"); ++ DWC_WARN("otg_cap parameter must be 0,1 or 2\n"); ++ retval = -DWC_E_INVALID; ++ goto out; ++ } ++ ++ valid = 1; ++ switch (val) { ++ case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE: ++ if (core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ++ valid = 0; ++ break; ++ case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE: ++ if ((core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ++ && (core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ++ && (core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ++ && (core_if->hwcfg2.b.op_mode != ++ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) { ++ valid = 0; ++ } ++ break; ++ case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE: ++ /* always valid */ ++ break; ++ } ++ if (!valid) { ++ if (dwc_otg_param_initialized(core_if->core_params->otg_cap)) { ++ DWC_ERROR ++ ("%d invalid for otg_cap paremter. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (((core_if->hwcfg2.b.op_mode == ++ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ++ || (core_if->hwcfg2.b.op_mode == ++ DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ++ || (core_if->hwcfg2.b.op_mode == ++ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ++ || (core_if->hwcfg2.b.op_mode == ++ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ? ++ DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE : ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->otg_cap = val; ++out: ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->otg_cap; ++} ++ ++int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for opt parameter\n"); ++ return -DWC_E_INVALID; ++ } ++ core_if->core_params->opt = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->opt; ++} ++ ++int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for dma enable\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && (core_if->hwcfg2.b.architecture == 0)) { ++ if (dwc_otg_param_initialized(core_if->core_params->dma_enable)) { ++ DWC_ERROR ++ ("%d invalid for dma_enable paremter. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dma_enable = val; ++ if (val == 0) { ++ dwc_otg_set_param_dma_desc_enable(core_if, 0); ++ } ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dma_enable; ++} ++ ++int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for dma_enable\n"); ++ DWC_WARN("dma_desc_enable must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) ++ && ((dwc_otg_get_param_dma_enable(core_if) == 0) ++ || (core_if->hwcfg4.b.desc_dma == 0))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dma_desc_enable)) { ++ DWC_ERROR ++ ("%d invalid for dma_desc_enable paremter. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ core_if->core_params->dma_desc_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dma_desc_enable; ++} ++ ++int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for host_support_fs_low_power\n"); ++ DWC_WARN("host_support_fs_low_power must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ core_if->core_params->host_support_fs_ls_low_power = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * ++ core_if) ++{ ++ return core_if->core_params->host_support_fs_ls_low_power; ++} ++ ++int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for enable_dynamic_fifo\n"); ++ DWC_WARN("enable_dynamic_fifo must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && (core_if->hwcfg2.b.dynamic_fifo == 0)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->enable_dynamic_fifo)) { ++ DWC_ERROR ++ ("%d invalid for enable_dynamic_fifo paremter. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ core_if->core_params->enable_dynamic_fifo = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->enable_dynamic_fifo; ++} ++ ++int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 32, 32768)) { ++ DWC_WARN("Wrong value for data_fifo_size\n"); ++ DWC_WARN("data_fifo_size must be 32-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > core_if->hwcfg3.b.dfifo_depth) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->data_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for data_fifo_size parameter. Check HW configuration.\n", ++ val); ++ } ++ val = core_if->hwcfg3.b.dfifo_depth; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->data_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->data_fifo_size; ++} ++ ++int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for dev_rx_fifo_size\n"); ++ DWC_WARN("dev_rx_fifo_size must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) { ++ if (dwc_otg_param_initialized(core_if->core_params->dev_rx_fifo_size)) { ++ DWC_WARN("%d invalid for dev_rx_fifo_size parameter\n", val); ++ } ++ val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_rx_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dev_rx_fifo_size; ++} ++ ++int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for dev_nperio_tx_fifo\n"); ++ DWC_WARN("dev_nperio_tx_fifo must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dev_nperio_tx_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for dev_nperio_tx_fifo_size. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> ++ 16); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_nperio_tx_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dev_nperio_tx_fifo_size; ++} ++ ++int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for host_rx_fifo_size\n"); ++ DWC_WARN("host_rx_fifo_size must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_rx_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for host_rx_fifo_size. Check HW configuration.\n", ++ val); ++ } ++ val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_rx_fifo_size = val; ++ return retval; ++ ++} ++ ++int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_rx_fifo_size; ++} ++ ++int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for host_nperio_tx_fifo_size\n"); ++ DWC_WARN("host_nperio_tx_fifo_size must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_nperio_tx_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for host_nperio_tx_fifo_size. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> ++ 16); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_nperio_tx_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_nperio_tx_fifo_size; ++} ++ ++int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { ++ DWC_WARN("Wrong value for host_perio_tx_fifo_size\n"); ++ DWC_WARN("host_perio_tx_fifo_size must be 16-32768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > ((core_if->hptxfsiz.d32) >> 16)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_perio_tx_fifo_size)) { ++ DWC_ERROR ++ ("%d invalid for host_perio_tx_fifo_size. Check HW configuration.\n", ++ val); ++ } ++ val = (core_if->hptxfsiz.d32) >> 16; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_perio_tx_fifo_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_perio_tx_fifo_size; ++} ++ ++int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 2047, 524288)) { ++ DWC_WARN("Wrong value for max_transfer_size\n"); ++ DWC_WARN("max_transfer_size must be 2047-524288\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val >= (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->max_transfer_size)) { ++ DWC_ERROR ++ ("%d invalid for max_transfer_size. Check HW configuration.\n", ++ val); ++ } ++ val = ++ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 11)) - ++ 1); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->max_transfer_size = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->max_transfer_size; ++} ++ ++int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 15, 511)) { ++ DWC_WARN("Wrong value for max_packet_count\n"); ++ DWC_WARN("max_packet_count must be 15-511\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->max_packet_count)) { ++ DWC_ERROR ++ ("%d invalid for max_packet_count. Check HW configuration.\n", ++ val); ++ } ++ val = ++ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->max_packet_count = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->max_packet_count; ++} ++ ++int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 1, 16)) { ++ DWC_WARN("Wrong value for host_channels\n"); ++ DWC_WARN("host_channels must be 1-16\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (core_if->hwcfg2.b.num_host_chan + 1)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_channels)) { ++ DWC_ERROR ++ ("%d invalid for host_channels. Check HW configurations.\n", ++ val); ++ } ++ val = (core_if->hwcfg2.b.num_host_chan + 1); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_channels = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_channels; ++} ++ ++int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 1, 15)) { ++ DWC_WARN("Wrong value for dev_endpoints\n"); ++ DWC_WARN("dev_endpoints must be 1-15\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > (core_if->hwcfg2.b.num_dev_ep)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dev_endpoints)) { ++ DWC_ERROR ++ ("%d invalid for dev_endpoints. Check HW configurations.\n", ++ val); ++ } ++ val = core_if->hwcfg2.b.num_dev_ep; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_endpoints = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dev_endpoints; ++} ++ ++int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 2)) { ++ DWC_WARN("Wrong value for phy_type\n"); ++ DWC_WARN("phy_type must be 0,1 or 2\n"); ++ return -DWC_E_INVALID; ++ } ++#ifndef NO_FS_PHY_HW_CHECKS ++ if ((val == DWC_PHY_TYPE_PARAM_UTMI) && ++ ((core_if->hwcfg2.b.hs_phy_type == 1) || ++ (core_if->hwcfg2.b.hs_phy_type == 3))) { ++ valid = 1; ++ } else if ((val == DWC_PHY_TYPE_PARAM_ULPI) && ++ ((core_if->hwcfg2.b.hs_phy_type == 2) || ++ (core_if->hwcfg2.b.hs_phy_type == 3))) { ++ valid = 1; ++ } else if ((val == DWC_PHY_TYPE_PARAM_FS) && ++ (core_if->hwcfg2.b.fs_phy_type == 1)) { ++ valid = 1; ++ } ++ if (!valid) { ++ if (dwc_otg_param_initialized(core_if->core_params->phy_type)) { ++ DWC_ERROR ++ ("%d invalid for phy_type. Check HW configurations.\n", ++ val); ++ } ++ if (core_if->hwcfg2.b.hs_phy_type) { ++ if ((core_if->hwcfg2.b.hs_phy_type == 3) || ++ (core_if->hwcfg2.b.hs_phy_type == 1)) { ++ val = DWC_PHY_TYPE_PARAM_UTMI; ++ } else { ++ val = DWC_PHY_TYPE_PARAM_ULPI; ++ } ++ } ++ retval = -DWC_E_INVALID; ++ } ++#endif ++ core_if->core_params->phy_type = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->phy_type; ++} ++ ++int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for speed parameter\n"); ++ DWC_WARN("max_speed parameter must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ if ((val == 0) ++ && dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS) { ++ if (dwc_otg_param_initialized(core_if->core_params->speed)) { ++ DWC_ERROR ++ ("%d invalid for speed paremter. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (dwc_otg_get_param_phy_type(core_if) == ++ DWC_PHY_TYPE_PARAM_FS ? 1 : 0); ++ retval = -DWC_E_INVALID; ++ } ++ core_if->core_params->speed = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->speed; ++} ++ ++int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN ++ ("Wrong value for host_ls_low_power_phy_clk parameter\n"); ++ DWC_WARN("host_ls_low_power_phy_clk must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) ++ && (dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->host_ls_low_power_phy_clk)) { ++ DWC_ERROR ++ ("%d invalid for host_ls_low_power_phy_clk. Check HW configuration.\n", ++ val); ++ } ++ val = ++ (dwc_otg_get_param_phy_type(core_if) == ++ DWC_PHY_TYPE_PARAM_FS) ? ++ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : ++ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->host_ls_low_power_phy_clk = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->host_ls_low_power_phy_clk; ++} ++ ++int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for phy_ulpi_ddr\n"); ++ DWC_WARN("phy_upli_ddr must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->phy_ulpi_ddr = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->phy_ulpi_ddr; ++} ++ ++int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for phy_ulpi_ext_vbus\n"); ++ DWC_WARN("phy_ulpi_ext_vbus must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->phy_ulpi_ext_vbus = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->phy_ulpi_ext_vbus; ++} ++ ++int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 8, 8) && DWC_OTG_PARAM_TEST(val, 16, 16)) { ++ DWC_WARN("Wrong valaue for phy_utmi_width\n"); ++ DWC_WARN("phy_utmi_width must be 8 or 16\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->phy_utmi_width = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->phy_utmi_width; ++} ++ ++int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for ulpi_fs_ls\n"); ++ DWC_WARN("ulpi_fs_ls must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->ulpi_fs_ls = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ulpi_fs_ls; ++} ++ ++int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for ts_dline\n"); ++ DWC_WARN("ts_dline must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->ts_dline = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ts_dline; ++} ++ ++int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for i2c_enable\n"); ++ DWC_WARN("i2c_enable must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++#ifndef NO_FS_PHY_HW_CHECK ++ if (val == 1 && core_if->hwcfg3.b.i2c == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->i2c_enable)) { ++ DWC_ERROR ++ ("%d invalid for i2c_enable. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++#endif ++ ++ core_if->core_params->i2c_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->i2c_enable; ++} ++ ++int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val, int fifo_num) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 4, 768)) { ++ DWC_WARN("Wrong value for dev_perio_tx_fifo_size\n"); ++ DWC_WARN("dev_perio_tx_fifo_size must be 4-768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > ++ (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dev_perio_tx_fifo_size[fifo_num])) { ++ DWC_ERROR ++ ("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", ++ val, fifo_num); ++ } ++ val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num])); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_perio_tx_fifo_size[fifo_num] = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int fifo_num) ++{ ++ return core_if->core_params->dev_perio_tx_fifo_size[fifo_num]; ++} ++ ++int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if, ++ int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong valaue for en_multiple_tx_fifo,\n"); ++ DWC_WARN("en_multiple_tx_fifo must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val == 1 && core_if->hwcfg4.b.ded_fifo_en == 0) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->en_multiple_tx_fifo)) { ++ DWC_ERROR ++ ("%d invalid for parameter en_multiple_tx_fifo. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->en_multiple_tx_fifo = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->en_multiple_tx_fifo; ++} ++ ++int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val, ++ int fifo_num) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 4, 768)) { ++ DWC_WARN("Wrong value for dev_tx_fifo_size\n"); ++ DWC_WARN("dev_tx_fifo_size must be 4-768\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val > ++ (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->dev_tx_fifo_size[fifo_num])) { ++ DWC_ERROR ++ ("`%d' invalid for parameter `dev_tx_fifo_size_%d'. Check HW configuration.\n", ++ val, fifo_num); ++ } ++ val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num])); ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->dev_tx_fifo_size[fifo_num] = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int fifo_num) ++{ ++ return core_if->core_params->dev_tx_fifo_size[fifo_num]; ++} ++ ++int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 7)) { ++ DWC_WARN("Wrong value for thr_ctl\n"); ++ DWC_WARN("thr_ctl must be 0-7\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val != 0) && ++ (!dwc_otg_get_param_dma_enable(core_if) || ++ !core_if->hwcfg4.b.ded_fifo_en)) { ++ if (dwc_otg_param_initialized(core_if->core_params->thr_ctl)) { ++ DWC_ERROR ++ ("%d invalid for parameter thr_ctl. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->thr_ctl = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_thr_ctl(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->thr_ctl; ++} ++ ++int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("Wrong value for lpm_enable\n"); ++ DWC_WARN("lpm_enable must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val && !core_if->hwcfg3.b.otg_lpm_en) { ++ if (dwc_otg_param_initialized(core_if->core_params->lpm_enable)) { ++ DWC_ERROR ++ ("%d invalid for parameter lpm_enable. Check HW configuration.\n", ++ val); ++ } ++ val = 0; ++ retval = -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->lpm_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->lpm_enable; ++} ++ ++int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 8, 128)) { ++ DWC_WARN("Wrong valaue for tx_thr_length\n"); ++ DWC_WARN("tx_thr_length must be 8 - 128\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->tx_thr_length = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_tx_thr_length(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->tx_thr_length; ++} ++ ++int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 8, 128)) { ++ DWC_WARN("Wrong valaue for rx_thr_length\n"); ++ DWC_WARN("rx_thr_length must be 8 - 128\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->rx_thr_length = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_rx_thr_length(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->rx_thr_length; ++} ++ ++int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ if (DWC_OTG_PARAM_TEST(val, 1, 1) && ++ DWC_OTG_PARAM_TEST(val, 4, 4) && ++ DWC_OTG_PARAM_TEST(val, 8, 8) && ++ DWC_OTG_PARAM_TEST(val, 16, 16) && ++ DWC_OTG_PARAM_TEST(val, 32, 32) && ++ DWC_OTG_PARAM_TEST(val, 64, 64) && ++ DWC_OTG_PARAM_TEST(val, 128, 128) && ++ DWC_OTG_PARAM_TEST(val, 256, 256)) { ++ DWC_WARN("`%d' invalid for parameter `dma_burst_size'\n", val); ++ return -DWC_E_INVALID; ++ } ++ core_if->core_params->dma_burst_size = val; ++ return 0; ++} ++ ++int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dma_burst_size; ++} ++ ++int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `pti_enable'\n", val); ++ return -DWC_E_INVALID; ++ } ++ if (val && (core_if->snpsid < OTG_CORE_REV_2_72a)) { ++ if (dwc_otg_param_initialized(core_if->core_params->pti_enable)) { ++ DWC_ERROR ++ ("%d invalid for parameter pti_enable. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->pti_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->pti_enable; ++} ++ ++int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `mpi_enable'\n", val); ++ return -DWC_E_INVALID; ++ } ++ if (val && (core_if->hwcfg2.b.multi_proc_int == 0)) { ++ if (dwc_otg_param_initialized(core_if->core_params->mpi_enable)) { ++ DWC_ERROR ++ ("%d invalid for parameter mpi_enable. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->mpi_enable = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->mpi_enable; ++} ++ ++int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `adp_enable'\n", val); ++ return -DWC_E_INVALID; ++ } ++ if (val && (core_if->hwcfg3.b.adp_supp == 0)) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->adp_supp_enable)) { ++ DWC_ERROR ++ ("%d invalid for parameter adp_enable. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->adp_supp_enable = val; ++ /*Set OTG version 2.0 in case of enabling ADP*/ ++ if (val) ++ dwc_otg_set_param_otg_ver(core_if, 1); ++ ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->adp_supp_enable; ++} ++ ++int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `ic_usb_cap'\n", val); ++ DWC_WARN("ic_usb_cap must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val && (core_if->hwcfg2.b.otg_enable_ic_usb == 0)) { ++ if (dwc_otg_param_initialized(core_if->core_params->ic_usb_cap)) { ++ DWC_ERROR ++ ("%d invalid for parameter ic_usb_cap. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->ic_usb_cap = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ic_usb_cap; ++} ++ ++int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 3)) { ++ DWC_WARN("`%d' invalid for parameter `ahb_thr_ratio'\n", val); ++ DWC_WARN("ahb_thr_ratio must be 0 - 3\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (val ++ && (core_if->snpsid < OTG_CORE_REV_2_81a ++ || !dwc_otg_get_param_thr_ctl(core_if))) { ++ valid = 0; ++ } else if (val ++ && ((dwc_otg_get_param_tx_thr_length(core_if) / (1 << val)) < ++ 4)) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized ++ (core_if->core_params->ahb_thr_ratio)) { ++ DWC_ERROR ++ ("%d invalid for parameter ahb_thr_ratio. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ ++ core_if->core_params->ahb_thr_ratio = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ahb_thr_ratio; ++} ++ ++int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ hwcfg4_data_t hwcfg4 = {.d32 = 0 }; ++ hwcfg4.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4); ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 3)) { ++ DWC_WARN("`%d' invalid for parameter `power_down'\n", val); ++ DWC_WARN("power_down must be 0 - 2\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 2) && (core_if->snpsid < OTG_CORE_REV_2_91a)) { ++ valid = 0; ++ } ++ if ((val == 3) ++ && ((core_if->snpsid < OTG_CORE_REV_3_00a) ++ || (hwcfg4.b.xhiber == 0))) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->power_down)) { ++ DWC_ERROR ++ ("%d invalid for parameter power_down. Check HW configuration.\n", ++ val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->power_down = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->power_down; ++} ++ ++int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `reload_ctl'\n", val); ++ DWC_WARN("reload_ctl must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_92a)) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->reload_ctl)) { ++ DWC_ERROR("%d invalid for parameter reload_ctl." ++ "Check HW configuration.\n", val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->reload_ctl = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->reload_ctl; ++} ++ ++int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `dev_out_nak'\n", val); ++ DWC_WARN("dev_out_nak must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_93a) || ++ !(core_if->core_params->dma_desc_enable))) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->dev_out_nak)) { ++ DWC_ERROR("%d invalid for parameter dev_out_nak." ++ "Check HW configuration.\n", val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->dev_out_nak = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->dev_out_nak; ++} ++ ++int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `cont_on_bna'\n", val); ++ DWC_WARN("cont_on_bna must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_94a) || ++ !(core_if->core_params->dma_desc_enable))) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->cont_on_bna)) { ++ DWC_ERROR("%d invalid for parameter cont_on_bna." ++ "Check HW configuration.\n", val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->cont_on_bna = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->cont_on_bna; ++} ++ ++int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ int valid = 1; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `ahb_single'\n", val); ++ DWC_WARN("ahb_single must be 0 or 1\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_94a)) { ++ valid = 0; ++ } ++ if (valid == 0) { ++ if (dwc_otg_param_initialized(core_if->core_params->ahb_single)) { ++ DWC_ERROR("%d invalid for parameter ahb_single." ++ "Check HW configuration.\n", val); ++ } ++ retval = -DWC_E_INVALID; ++ val = 0; ++ } ++ core_if->core_params->ahb_single = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->ahb_single; ++} ++ ++int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val) ++{ ++ int retval = 0; ++ ++ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { ++ DWC_WARN("`%d' invalid for parameter `otg_ver'\n", val); ++ DWC_WARN ++ ("otg_ver must be 0(for OTG 1.3 support) or 1(for OTG 2.0 support)\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ core_if->core_params->otg_ver = val; ++ return retval; ++} ++ ++int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->core_params->otg_ver; ++} ++ ++uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if) ++{ ++ gotgctl_data_t otgctl; ++ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ return otgctl.b.hstnegscs; ++} ++ ++uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if) ++{ ++ gotgctl_data_t otgctl; ++ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ return otgctl.b.sesreqscs; ++} ++ ++void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ if(core_if->otg_ver == 0) { ++ gotgctl_data_t otgctl; ++ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ otgctl.b.hnpreq = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, otgctl.d32); ++ } else { ++ core_if->otg_sts = val; ++ } ++} ++ ++uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->snpsid; ++} ++ ++uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ return gintsts.b.curmode; ++} ++ ++uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if) ++{ ++ gusbcfg_data_t usbcfg; ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ return usbcfg.b.hnpcap; ++} ++ ++void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ gusbcfg_data_t usbcfg; ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ usbcfg.b.hnpcap = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32); ++} ++ ++uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if) ++{ ++ gusbcfg_data_t usbcfg; ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ return usbcfg.b.srpcap; ++} ++ ++void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ gusbcfg_data_t usbcfg; ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ usbcfg.b.srpcap = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32); ++} ++ ++uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if) ++{ ++ dcfg_data_t dcfg; ++ /* originally: dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); */ ++ ++ dcfg.d32 = -1; //GRAYG ++ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)\n", __func__, core_if); ++ if (NULL == core_if) ++ DWC_ERROR("reg request with NULL core_if\n"); ++ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)\n", __func__, ++ core_if, core_if->dev_if); ++ if (NULL == core_if->dev_if) ++ DWC_ERROR("reg request with NULL dev_if\n"); ++ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)->" ++ "dev_global_regs(%p)\n", __func__, ++ core_if, core_if->dev_if, ++ core_if->dev_if->dev_global_regs); ++ if (NULL == core_if->dev_if->dev_global_regs) ++ DWC_ERROR("reg request with NULL dev_global_regs\n"); ++ else { ++ DWC_DEBUGPL(DBG_CILV, "%s - &core_if(%p)->dev_if(%p)->" ++ "dev_global_regs(%p)->dcfg = %p\n", __func__, ++ core_if, core_if->dev_if, ++ core_if->dev_if->dev_global_regs, ++ &core_if->dev_if->dev_global_regs->dcfg); ++ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ } ++ return dcfg.b.devspd; ++} ++ ++void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ dcfg_data_t dcfg; ++ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ dcfg.b.devspd = val; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); ++} ++ ++uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); ++ return hprt0.b.prtconnsts; ++} ++ ++uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if) ++{ ++ dsts_data_t dsts; ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ return dsts.b.enumspd; ++} ++ ++uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); ++ return hprt0.b.prtpwr; ++ ++} ++ ++uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if) ++{ ++ return core_if->hibernation_suspend; ++} ++ ++void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = val; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++} ++ ++uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); ++ return hprt0.b.prtsusp; ++ ++} ++ ++void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = val; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++} ++ ++uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if) ++{ ++ hfir_data_t hfir; ++ hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); ++ return hfir.b.frint; ++ ++} ++ ++void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hfir_data_t hfir; ++ uint32_t fram_int; ++ fram_int = calc_frame_interval(core_if); ++ hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); ++ if (!core_if->core_params->reload_ctl) { ++ DWC_WARN("\nCannot reload HFIR register.HFIR.HFIRRldCtrl bit is" ++ "not set to 1.\nShould load driver with reload_ctl=1" ++ " module parameter\n"); ++ return; ++ } ++ switch (fram_int) { ++ case 3750: ++ if ((val < 3350) || (val > 4150)) { ++ DWC_WARN("HFIR interval for HS core and 30 MHz" ++ "clock freq should be from 3350 to 4150\n"); ++ return; ++ } ++ break; ++ case 30000: ++ if ((val < 26820) || (val > 33180)) { ++ DWC_WARN("HFIR interval for FS/LS core and 30 MHz" ++ "clock freq should be from 26820 to 33180\n"); ++ return; ++ } ++ break; ++ case 6000: ++ if ((val < 5360) || (val > 6640)) { ++ DWC_WARN("HFIR interval for HS core and 48 MHz" ++ "clock freq should be from 5360 to 6640\n"); ++ return; ++ } ++ break; ++ case 48000: ++ if ((val < 42912) || (val > 53088)) { ++ DWC_WARN("HFIR interval for FS/LS core and 48 MHz" ++ "clock freq should be from 42912 to 53088\n"); ++ return; ++ } ++ break; ++ case 7500: ++ if ((val < 6700) || (val > 8300)) { ++ DWC_WARN("HFIR interval for HS core and 60 MHz" ++ "clock freq should be from 6700 to 8300\n"); ++ return; ++ } ++ break; ++ case 60000: ++ if ((val < 53640) || (val > 65536)) { ++ DWC_WARN("HFIR interval for FS/LS core and 60 MHz" ++ "clock freq should be from 53640 to 65536\n"); ++ return; ++ } ++ break; ++ default: ++ DWC_WARN("Unknown frame interval\n"); ++ return; ++ break; ++ ++ } ++ hfir.b.frint = val; ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hfir.d32); ++} ++ ++uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if) ++{ ++ hcfg_data_t hcfg; ++ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); ++ return hcfg.b.modechtimen; ++ ++} ++ ++void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hcfg_data_t hcfg; ++ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); ++ hcfg.b.modechtimen = val; ++ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32); ++} ++ ++void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtres = val; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++} ++ ++uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if) ++{ ++ dctl_data_t dctl; ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); ++ return dctl.b.rmtwkupsig; ++} ++ ++uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ ++ DWC_ASSERT(! ++ ((core_if->lx_state == DWC_OTG_L1) ^ lpmcfg.b.prt_sleep_sts), ++ "lx_state = %d, lmpcfg.prt_sleep_sts = %d\n", ++ core_if->lx_state, lpmcfg.b.prt_sleep_sts); ++ ++ return lpmcfg.b.prt_sleep_sts; ++} ++ ++uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ return lpmcfg.b.rem_wkup_en; ++} ++ ++uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ return lpmcfg.b.appl_resp; ++} ++ ++void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.appl_resp = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++} ++ ++uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ return lpmcfg.b.hsic_connect; ++} ++ ++void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.hsic_connect = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++} ++ ++uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ return lpmcfg.b.inv_sel_hsic; ++ ++} ++ ++void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.inv_sel_hsic = val; ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++} ++ ++uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++} ++ ++void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, val); ++} ++ ++uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++} ++ ++void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, val); ++} ++ ++uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); ++} ++ ++void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, val); ++} ++ ++uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz); ++} ++ ++void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz, val); ++} ++ ++uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->gpvndctl); ++} ++ ++void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gpvndctl, val); ++} ++ ++uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->ggpio); ++} ++ ++void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, val); ++} ++ ++uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(core_if->host_if->hprt0); ++ ++} ++ ++void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(core_if->host_if->hprt0, val); ++} ++ ++uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->guid); ++} ++ ++void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val) ++{ ++ DWC_WRITE_REG32(&core_if->core_global_regs->guid, val); ++} ++ ++uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if) ++{ ++ return DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz); ++} ++ ++uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if) ++{ ++ return ((core_if->otg_ver == 1) ? (uint16_t)0x0200 : (uint16_t)0x0103); ++} ++ ++/** ++ * Start the SRP timer to detect when the SRP does not complete within ++ * 6 seconds. ++ * ++ * @param core_if the pointer to core_if strucure. ++ */ ++void dwc_otg_pcd_start_srp_timer(dwc_otg_core_if_t * core_if) ++{ ++ core_if->srp_timer_started = 1; ++ DWC_TIMER_SCHEDULE(core_if->srp_timer, 6000 /* 6 secs */ ); ++} ++ ++void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t *addr = (uint32_t *) & (core_if->core_global_regs->gotgctl); ++ gotgctl_data_t mem; ++ gotgctl_data_t val; ++ ++ val.d32 = DWC_READ_REG32(addr); ++ if (val.b.sesreq) { ++ DWC_ERROR("Session Request Already active!\n"); ++ return; ++ } ++ ++ DWC_INFO("Session Request Initated\n"); //NOTICE ++ mem.d32 = DWC_READ_REG32(addr); ++ mem.b.sesreq = 1; ++ DWC_WRITE_REG32(addr, mem.d32); ++ ++ /* Start the SRP timer */ ++ dwc_otg_pcd_start_srp_timer(core_if); ++ return; ++} +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_cil.h +@@ -0,0 +1,1464 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $ ++ * $Revision: #123 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_CIL_H__) ++#define __DWC_CIL_H__ ++ ++#include "dwc_list.h" ++#include "dwc_otg_dbg.h" ++#include "dwc_otg_regs.h" ++ ++#include "dwc_otg_core_if.h" ++#include "dwc_otg_adp.h" ++ ++/** ++ * @file ++ * This file contains the interface to the Core Interface Layer. ++ */ ++ ++#ifdef DWC_UTE_CFI ++ ++#define MAX_DMA_DESCS_PER_EP 256 ++ ++/** ++ * Enumeration for the data buffer mode ++ */ ++typedef enum _data_buffer_mode { ++ BM_STANDARD = 0, /* data buffer is in normal mode */ ++ BM_SG = 1, /* data buffer uses the scatter/gather mode */ ++ BM_CONCAT = 2, /* data buffer uses the concatenation mode */ ++ BM_CIRCULAR = 3, /* data buffer uses the circular DMA mode */ ++ BM_ALIGN = 4 /* data buffer is in buffer alignment mode */ ++} data_buffer_mode_e; ++#endif //DWC_UTE_CFI ++ ++/** Macros defined for DWC OTG HW Release version */ ++ ++#define OTG_CORE_REV_2_60a 0x4F54260A ++#define OTG_CORE_REV_2_71a 0x4F54271A ++#define OTG_CORE_REV_2_72a 0x4F54272A ++#define OTG_CORE_REV_2_80a 0x4F54280A ++#define OTG_CORE_REV_2_81a 0x4F54281A ++#define OTG_CORE_REV_2_90a 0x4F54290A ++#define OTG_CORE_REV_2_91a 0x4F54291A ++#define OTG_CORE_REV_2_92a 0x4F54292A ++#define OTG_CORE_REV_2_93a 0x4F54293A ++#define OTG_CORE_REV_2_94a 0x4F54294A ++#define OTG_CORE_REV_3_00a 0x4F54300A ++ ++/** ++ * Information for each ISOC packet. ++ */ ++typedef struct iso_pkt_info { ++ uint32_t offset; ++ uint32_t length; ++ int32_t status; ++} iso_pkt_info_t; ++ ++/** ++ * The dwc_ep structure represents the state of a single ++ * endpoint when acting in device mode. It contains the data items ++ * needed for an endpoint to be activated and transfer packets. ++ */ ++typedef struct dwc_ep { ++ /** EP number used for register address lookup */ ++ uint8_t num; ++ /** EP direction 0 = OUT */ ++ unsigned is_in:1; ++ /** EP active. */ ++ unsigned active:1; ++ ++ /** ++ * Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic ++ * Tx FIFO. If dedicated Tx FIFOs are enabled Tx FIFO # FOR IN EPs*/ ++ unsigned tx_fifo_num:4; ++ /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */ ++ unsigned type:2; ++#define DWC_OTG_EP_TYPE_CONTROL 0 ++#define DWC_OTG_EP_TYPE_ISOC 1 ++#define DWC_OTG_EP_TYPE_BULK 2 ++#define DWC_OTG_EP_TYPE_INTR 3 ++ ++ /** DATA start PID for INTR and BULK EP */ ++ unsigned data_pid_start:1; ++ /** Frame (even/odd) for ISOC EP */ ++ unsigned even_odd_frame:1; ++ /** Max Packet bytes */ ++ unsigned maxpacket:11; ++ ++ /** Max Transfer size */ ++ uint32_t maxxfer; ++ ++ /** @name Transfer state */ ++ /** @{ */ ++ ++ /** ++ * Pointer to the beginning of the transfer buffer -- do not modify ++ * during transfer. ++ */ ++ ++ dwc_dma_t dma_addr; ++ ++ dwc_dma_t dma_desc_addr; ++ dwc_otg_dev_dma_desc_t *desc_addr; ++ ++ uint8_t *start_xfer_buff; ++ /** pointer to the transfer buffer */ ++ uint8_t *xfer_buff; ++ /** Number of bytes to transfer */ ++ unsigned xfer_len:19; ++ /** Number of bytes transferred. */ ++ unsigned xfer_count:19; ++ /** Sent ZLP */ ++ unsigned sent_zlp:1; ++ /** Total len for control transfer */ ++ unsigned total_len:19; ++ ++ /** stall clear flag */ ++ unsigned stall_clear_flag:1; ++ ++ /** SETUP pkt cnt rollover flag for EP0 out*/ ++ unsigned stp_rollover; ++ ++#ifdef DWC_UTE_CFI ++ /* The buffer mode */ ++ data_buffer_mode_e buff_mode; ++ ++ /* The chain of DMA descriptors. ++ * MAX_DMA_DESCS_PER_EP will be allocated for each active EP. ++ */ ++ dwc_otg_dma_desc_t *descs; ++ ++ /* The DMA address of the descriptors chain start */ ++ dma_addr_t descs_dma_addr; ++ /** This variable stores the length of the last enqueued request */ ++ uint32_t cfi_req_len; ++#endif //DWC_UTE_CFI ++ ++/** Max DMA Descriptor count for any EP */ ++#define MAX_DMA_DESC_CNT 256 ++ /** Allocated DMA Desc count */ ++ uint32_t desc_cnt; ++ ++ /** bInterval */ ++ uint32_t bInterval; ++ /** Next frame num to setup next ISOC transfer */ ++ uint32_t frame_num; ++ /** Indicates SOF number overrun in DSTS */ ++ uint8_t frm_overrun; ++ ++#ifdef DWC_UTE_PER_IO ++ /** Next frame num for which will be setup DMA Desc */ ++ uint32_t xiso_frame_num; ++ /** bInterval */ ++ uint32_t xiso_bInterval; ++ /** Count of currently active transfers - shall be either 0 or 1 */ ++ int xiso_active_xfers; ++ int xiso_queued_xfers; ++#endif ++#ifdef DWC_EN_ISOC ++ /** ++ * Variables specific for ISOC EPs ++ * ++ */ ++ /** DMA addresses of ISOC buffers */ ++ dwc_dma_t dma_addr0; ++ dwc_dma_t dma_addr1; ++ ++ dwc_dma_t iso_dma_desc_addr; ++ dwc_otg_dev_dma_desc_t *iso_desc_addr; ++ ++ /** pointer to the transfer buffers */ ++ uint8_t *xfer_buff0; ++ uint8_t *xfer_buff1; ++ ++ /** number of ISOC Buffer is processing */ ++ uint32_t proc_buf_num; ++ /** Interval of ISOC Buffer processing */ ++ uint32_t buf_proc_intrvl; ++ /** Data size for regular frame */ ++ uint32_t data_per_frame; ++ ++ /* todo - pattern data support is to be implemented in the future */ ++ /** Data size for pattern frame */ ++ uint32_t data_pattern_frame; ++ /** Frame number of pattern data */ ++ uint32_t sync_frame; ++ ++ /** bInterval */ ++ uint32_t bInterval; ++ /** ISO Packet number per frame */ ++ uint32_t pkt_per_frm; ++ /** Next frame num for which will be setup DMA Desc */ ++ uint32_t next_frame; ++ /** Number of packets per buffer processing */ ++ uint32_t pkt_cnt; ++ /** Info for all isoc packets */ ++ iso_pkt_info_t *pkt_info; ++ /** current pkt number */ ++ uint32_t cur_pkt; ++ /** current pkt number */ ++ uint8_t *cur_pkt_addr; ++ /** current pkt number */ ++ uint32_t cur_pkt_dma_addr; ++#endif /* DWC_EN_ISOC */ ++ ++/** @} */ ++} dwc_ep_t; ++ ++/* ++ * Reasons for halting a host channel. ++ */ ++typedef enum dwc_otg_halt_status { ++ DWC_OTG_HC_XFER_NO_HALT_STATUS, ++ DWC_OTG_HC_XFER_COMPLETE, ++ DWC_OTG_HC_XFER_URB_COMPLETE, ++ DWC_OTG_HC_XFER_ACK, ++ DWC_OTG_HC_XFER_NAK, ++ DWC_OTG_HC_XFER_NYET, ++ DWC_OTG_HC_XFER_STALL, ++ DWC_OTG_HC_XFER_XACT_ERR, ++ DWC_OTG_HC_XFER_FRAME_OVERRUN, ++ DWC_OTG_HC_XFER_BABBLE_ERR, ++ DWC_OTG_HC_XFER_DATA_TOGGLE_ERR, ++ DWC_OTG_HC_XFER_AHB_ERR, ++ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, ++ DWC_OTG_HC_XFER_URB_DEQUEUE ++} dwc_otg_halt_status_e; ++ ++/** ++ * Host channel descriptor. This structure represents the state of a single ++ * host channel when acting in host mode. It contains the data items needed to ++ * transfer packets to an endpoint via a host channel. ++ */ ++typedef struct dwc_hc { ++ /** Host channel number used for register address lookup */ ++ uint8_t hc_num; ++ ++ /** Device to access */ ++ unsigned dev_addr:7; ++ ++ /** EP to access */ ++ unsigned ep_num:4; ++ ++ /** EP direction. 0: OUT, 1: IN */ ++ unsigned ep_is_in:1; ++ ++ /** ++ * EP speed. ++ * One of the following values: ++ * - DWC_OTG_EP_SPEED_LOW ++ * - DWC_OTG_EP_SPEED_FULL ++ * - DWC_OTG_EP_SPEED_HIGH ++ */ ++ unsigned speed:2; ++#define DWC_OTG_EP_SPEED_LOW 0 ++#define DWC_OTG_EP_SPEED_FULL 1 ++#define DWC_OTG_EP_SPEED_HIGH 2 ++ ++ /** ++ * Endpoint type. ++ * One of the following values: ++ * - DWC_OTG_EP_TYPE_CONTROL: 0 ++ * - DWC_OTG_EP_TYPE_ISOC: 1 ++ * - DWC_OTG_EP_TYPE_BULK: 2 ++ * - DWC_OTG_EP_TYPE_INTR: 3 ++ */ ++ unsigned ep_type:2; ++ ++ /** Max packet size in bytes */ ++ unsigned max_packet:11; ++ ++ /** ++ * PID for initial transaction. ++ * 0: DATA0,
++ * 1: DATA2,
++ * 2: DATA1,
++ * 3: MDATA (non-Control EP), ++ * SETUP (Control EP) ++ */ ++ unsigned data_pid_start:2; ++#define DWC_OTG_HC_PID_DATA0 0 ++#define DWC_OTG_HC_PID_DATA2 1 ++#define DWC_OTG_HC_PID_DATA1 2 ++#define DWC_OTG_HC_PID_MDATA 3 ++#define DWC_OTG_HC_PID_SETUP 3 ++ ++ /** Number of periodic transactions per (micro)frame */ ++ unsigned multi_count:2; ++ ++ /** @name Transfer State */ ++ /** @{ */ ++ ++ /** Pointer to the current transfer buffer position. */ ++ uint8_t *xfer_buff; ++ /** ++ * In Buffer DMA mode this buffer will be used ++ * if xfer_buff is not DWORD aligned. ++ */ ++ dwc_dma_t align_buff; ++ /** Total number of bytes to transfer. */ ++ uint32_t xfer_len; ++ /** Number of bytes transferred so far. */ ++ uint32_t xfer_count; ++ /** Packet count at start of transfer.*/ ++ uint16_t start_pkt_count; ++ ++ /** ++ * Flag to indicate whether the transfer has been started. Set to 1 if ++ * it has been started, 0 otherwise. ++ */ ++ uint8_t xfer_started; ++ ++ /** ++ * Set to 1 to indicate that a PING request should be issued on this ++ * channel. If 0, process normally. ++ */ ++ uint8_t do_ping; ++ ++ /** ++ * Set to 1 to indicate that the error count for this transaction is ++ * non-zero. Set to 0 if the error count is 0. ++ */ ++ uint8_t error_state; ++ ++ /** ++ * Set to 1 to indicate that this channel should be halted the next ++ * time a request is queued for the channel. This is necessary in ++ * slave mode if no request queue space is available when an attempt ++ * is made to halt the channel. ++ */ ++ uint8_t halt_on_queue; ++ ++ /** ++ * Set to 1 if the host channel has been halted, but the core is not ++ * finished flushing queued requests. Otherwise 0. ++ */ ++ uint8_t halt_pending; ++ ++ /** ++ * Reason for halting the host channel. ++ */ ++ dwc_otg_halt_status_e halt_status; ++ ++ /* ++ * Split settings for the host channel ++ */ ++ uint8_t do_split; /**< Enable split for the channel */ ++ uint8_t complete_split; /**< Enable complete split */ ++ uint8_t hub_addr; /**< Address of high speed hub */ ++ ++ uint8_t port_addr; /**< Port of the low/full speed device */ ++ /** Split transaction position ++ * One of the following values: ++ * - DWC_HCSPLIT_XACTPOS_MID ++ * - DWC_HCSPLIT_XACTPOS_BEGIN ++ * - DWC_HCSPLIT_XACTPOS_END ++ * - DWC_HCSPLIT_XACTPOS_ALL */ ++ uint8_t xact_pos; ++ ++ /** Set when the host channel does a short read. */ ++ uint8_t short_read; ++ ++ /** ++ * Number of requests issued for this channel since it was assigned to ++ * the current transfer (not counting PINGs). ++ */ ++ uint8_t requests; ++ ++ /** ++ * Queue Head for the transfer being processed by this channel. ++ */ ++ struct dwc_otg_qh *qh; ++ ++ /** @} */ ++ ++ /** Entry in list of host channels. */ ++ DWC_CIRCLEQ_ENTRY(dwc_hc) hc_list_entry; ++ ++ /** @name Descriptor DMA support */ ++ /** @{ */ ++ ++ /** Number of Transfer Descriptors */ ++ uint16_t ntd; ++ ++ /** Descriptor List DMA address */ ++ dwc_dma_t desc_list_addr; ++ ++ /** Scheduling micro-frame bitmap. */ ++ uint8_t schinfo; ++ ++ /** @} */ ++} dwc_hc_t; ++ ++/** ++ * The following parameters may be specified when starting the module. These ++ * parameters define how the DWC_otg controller should be configured. ++ */ ++typedef struct dwc_otg_core_params { ++ int32_t opt; ++ ++ /** ++ * Specifies the OTG capabilities. The driver will automatically ++ * detect the value for this parameter if none is specified. ++ * 0 - HNP and SRP capable (default) ++ * 1 - SRP Only capable ++ * 2 - No HNP/SRP capable ++ */ ++ int32_t otg_cap; ++ ++ /** ++ * Specifies whether to use slave or DMA mode for accessing the data ++ * FIFOs. The driver will automatically detect the value for this ++ * parameter if none is specified. ++ * 0 - Slave ++ * 1 - DMA (default, if available) ++ */ ++ int32_t dma_enable; ++ ++ /** ++ * When DMA mode is enabled specifies whether to use address DMA or DMA ++ * Descriptor mode for accessing the data FIFOs in device mode. The driver ++ * will automatically detect the value for this if none is specified. ++ * 0 - address DMA ++ * 1 - DMA Descriptor(default, if available) ++ */ ++ int32_t dma_desc_enable; ++ /** The DMA Burst size (applicable only for External DMA ++ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) ++ */ ++ int32_t dma_burst_size; /* Translate this to GAHBCFG values */ ++ ++ /** ++ * Specifies the maximum speed of operation in host and device mode. ++ * The actual speed depends on the speed of the attached device and ++ * the value of phy_type. The actual speed depends on the speed of the ++ * attached device. ++ * 0 - High Speed (default) ++ * 1 - Full Speed ++ */ ++ int32_t speed; ++ /** Specifies whether low power mode is supported when attached ++ * to a Full Speed or Low Speed device in host mode. ++ * 0 - Don't support low power mode (default) ++ * 1 - Support low power mode ++ */ ++ int32_t host_support_fs_ls_low_power; ++ ++ /** Specifies the PHY clock rate in low power mode when connected to a ++ * Low Speed device in host mode. This parameter is applicable only if ++ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS ++ * then defaults to 6 MHZ otherwise 48 MHZ. ++ * ++ * 0 - 48 MHz ++ * 1 - 6 MHz ++ */ ++ int32_t host_ls_low_power_phy_clk; ++ ++ /** ++ * 0 - Use cC FIFO size parameters ++ * 1 - Allow dynamic FIFO sizing (default) ++ */ ++ int32_t enable_dynamic_fifo; ++ ++ /** Total number of 4-byte words in the data FIFO memory. This ++ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic ++ * Tx FIFOs. ++ * 32 to 32768 (default 8192) ++ * Note: The total FIFO memory depth in the FPGA configuration is 8192. ++ */ ++ int32_t data_fifo_size; ++ ++ /** Number of 4-byte words in the Rx FIFO in device mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1064) ++ */ ++ int32_t dev_rx_fifo_size; ++ ++ /** Number of 4-byte words in the non-periodic Tx FIFO in device mode ++ * when dynamic FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t dev_nperio_tx_fifo_size; ++ ++ /** Number of 4-byte words in each of the periodic Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS]; ++ ++ /** Number of 4-byte words in the Rx FIFO in host mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t host_rx_fifo_size; ++ ++ /** Number of 4-byte words in the non-periodic Tx FIFO in host mode ++ * when Dynamic FIFO sizing is enabled in the core. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t host_nperio_tx_fifo_size; ++ ++ /** Number of 4-byte words in the host periodic Tx FIFO when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t host_perio_tx_fifo_size; ++ ++ /** The maximum transfer size supported in bytes. ++ * 2047 to 65,535 (default 65,535) ++ */ ++ int32_t max_transfer_size; ++ ++ /** The maximum number of packets in a transfer. ++ * 15 to 511 (default 511) ++ */ ++ int32_t max_packet_count; ++ ++ /** The number of host channel registers to use. ++ * 1 to 16 (default 12) ++ * Note: The FPGA configuration supports a maximum of 12 host channels. ++ */ ++ int32_t host_channels; ++ ++ /** The number of endpoints in addition to EP0 available for device ++ * mode operations. ++ * 1 to 15 (default 6 IN and OUT) ++ * Note: The FPGA configuration supports a maximum of 6 IN and OUT ++ * endpoints in addition to EP0. ++ */ ++ int32_t dev_endpoints; ++ ++ /** ++ * Specifies the type of PHY interface to use. By default, the driver ++ * will automatically detect the phy_type. ++ * ++ * 0 - Full Speed PHY ++ * 1 - UTMI+ (default) ++ * 2 - ULPI ++ */ ++ int32_t phy_type; ++ ++ /** ++ * Specifies the UTMI+ Data Width. This parameter is ++ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI ++ * PHY_TYPE, this parameter indicates the data width between ++ * the MAC and the ULPI Wrapper.) Also, this parameter is ++ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set ++ * to "8 and 16 bits", meaning that the core has been ++ * configured to work at either data path width. ++ * ++ * 8 or 16 bits (default 16) ++ */ ++ int32_t phy_utmi_width; ++ ++ /** ++ * Specifies whether the ULPI operates at double or single ++ * data rate. This parameter is only applicable if PHY_TYPE is ++ * ULPI. ++ * ++ * 0 - single data rate ULPI interface with 8 bit wide data ++ * bus (default) ++ * 1 - double data rate ULPI interface with 4 bit wide data ++ * bus ++ */ ++ int32_t phy_ulpi_ddr; ++ ++ /** ++ * Specifies whether to use the internal or external supply to ++ * drive the vbus with a ULPI phy. ++ */ ++ int32_t phy_ulpi_ext_vbus; ++ ++ /** ++ * Specifies whether to use the I2Cinterface for full speed PHY. This ++ * parameter is only applicable if PHY_TYPE is FS. ++ * 0 - No (default) ++ * 1 - Yes ++ */ ++ int32_t i2c_enable; ++ ++ int32_t ulpi_fs_ls; ++ ++ int32_t ts_dline; ++ ++ /** ++ * Specifies whether dedicated transmit FIFOs are ++ * enabled for non periodic IN endpoints in device mode ++ * 0 - No ++ * 1 - Yes ++ */ ++ int32_t en_multiple_tx_fifo; ++ ++ /** Number of 4-byte words in each of the Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS]; ++ ++ /** Thresholding enable flag- ++ * bit 0 - enable non-ISO Tx thresholding ++ * bit 1 - enable ISO Tx thresholding ++ * bit 2 - enable Rx thresholding ++ */ ++ uint32_t thr_ctl; ++ ++ /** Thresholding length for Tx ++ * FIFOs in 32 bit DWORDs ++ */ ++ uint32_t tx_thr_length; ++ ++ /** Thresholding length for Rx ++ * FIFOs in 32 bit DWORDs ++ */ ++ uint32_t rx_thr_length; ++ ++ /** ++ * Specifies whether LPM (Link Power Management) support is enabled ++ */ ++ int32_t lpm_enable; ++ ++ /** Per Transfer Interrupt ++ * mode enable flag ++ * 1 - Enabled ++ * 0 - Disabled ++ */ ++ int32_t pti_enable; ++ ++ /** Multi Processor Interrupt ++ * mode enable flag ++ * 1 - Enabled ++ * 0 - Disabled ++ */ ++ int32_t mpi_enable; ++ ++ /** IS_USB Capability ++ * 1 - Enabled ++ * 0 - Disabled ++ */ ++ int32_t ic_usb_cap; ++ ++ /** AHB Threshold Ratio ++ * 2'b00 AHB Threshold = MAC Threshold ++ * 2'b01 AHB Threshold = 1/2 MAC Threshold ++ * 2'b10 AHB Threshold = 1/4 MAC Threshold ++ * 2'b11 AHB Threshold = 1/8 MAC Threshold ++ */ ++ int32_t ahb_thr_ratio; ++ ++ /** ADP Support ++ * 1 - Enabled ++ * 0 - Disabled ++ */ ++ int32_t adp_supp_enable; ++ ++ /** HFIR Reload Control ++ * 0 - The HFIR cannot be reloaded dynamically. ++ * 1 - Allow dynamic reloading of the HFIR register during runtime. ++ */ ++ int32_t reload_ctl; ++ ++ /** DCFG: Enable device Out NAK ++ * 0 - The core does not set NAK after Bulk Out transfer complete. ++ * 1 - The core sets NAK after Bulk OUT transfer complete. ++ */ ++ int32_t dev_out_nak; ++ ++ /** DCFG: Enable Continue on BNA ++ * After receiving BNA interrupt the core disables the endpoint,when the ++ * endpoint is re-enabled by the application the core starts processing ++ * 0 - from the DOEPDMA descriptor ++ * 1 - from the descriptor which received the BNA. ++ */ ++ int32_t cont_on_bna; ++ ++ /** GAHBCFG: AHB Single Support ++ * This bit when programmed supports SINGLE transfers for remainder ++ * data in a transfer for DMA mode of operation. ++ * 0 - in this case the remainder data will be sent using INCR burst size. ++ * 1 - in this case the remainder data will be sent using SINGLE burst size. ++ */ ++ int32_t ahb_single; ++ ++ /** Core Power down mode ++ * 0 - No Power Down is enabled ++ * 1 - Reserved ++ * 2 - Complete Power Down (Hibernation) ++ */ ++ int32_t power_down; ++ ++ /** OTG revision supported ++ * 0 - OTG 1.3 revision ++ * 1 - OTG 2.0 revision ++ */ ++ int32_t otg_ver; ++ ++} dwc_otg_core_params_t; ++ ++#ifdef DEBUG ++struct dwc_otg_core_if; ++typedef struct hc_xfer_info { ++ struct dwc_otg_core_if *core_if; ++ dwc_hc_t *hc; ++} hc_xfer_info_t; ++#endif ++ ++typedef struct ep_xfer_info { ++ struct dwc_otg_core_if *core_if; ++ dwc_ep_t *ep; ++ uint8_t state; ++} ep_xfer_info_t; ++/* ++ * Device States ++ */ ++typedef enum dwc_otg_lx_state { ++ /** On state */ ++ DWC_OTG_L0, ++ /** LPM sleep state*/ ++ DWC_OTG_L1, ++ /** USB suspend state*/ ++ DWC_OTG_L2, ++ /** Off state*/ ++ DWC_OTG_L3 ++} dwc_otg_lx_state_e; ++ ++struct dwc_otg_global_regs_backup { ++ uint32_t gotgctl_local; ++ uint32_t gintmsk_local; ++ uint32_t gahbcfg_local; ++ uint32_t gusbcfg_local; ++ uint32_t grxfsiz_local; ++ uint32_t gnptxfsiz_local; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ uint32_t glpmcfg_local; ++#endif ++ uint32_t gi2cctl_local; ++ uint32_t hptxfsiz_local; ++ uint32_t pcgcctl_local; ++ uint32_t gdfifocfg_local; ++ uint32_t dtxfsiz_local[MAX_EPS_CHANNELS]; ++ uint32_t gpwrdn_local; ++ uint32_t xhib_pcgcctl; ++ uint32_t xhib_gpwrdn; ++}; ++ ++struct dwc_otg_host_regs_backup { ++ uint32_t hcfg_local; ++ uint32_t haintmsk_local; ++ uint32_t hcintmsk_local[MAX_EPS_CHANNELS]; ++ uint32_t hprt0_local; ++ uint32_t hfir_local; ++}; ++ ++struct dwc_otg_dev_regs_backup { ++ uint32_t dcfg; ++ uint32_t dctl; ++ uint32_t daintmsk; ++ uint32_t diepmsk; ++ uint32_t doepmsk; ++ uint32_t diepctl[MAX_EPS_CHANNELS]; ++ uint32_t dieptsiz[MAX_EPS_CHANNELS]; ++ uint32_t diepdma[MAX_EPS_CHANNELS]; ++}; ++/** ++ * The dwc_otg_core_if structure contains information needed to manage ++ * the DWC_otg controller acting in either host or device mode. It ++ * represents the programming view of the controller as a whole. ++ */ ++struct dwc_otg_core_if { ++ /** Parameters that define how the core should be configured.*/ ++ dwc_otg_core_params_t *core_params; ++ ++ /** Core Global registers starting at offset 000h. */ ++ dwc_otg_core_global_regs_t *core_global_regs; ++ ++ /** Device-specific information */ ++ dwc_otg_dev_if_t *dev_if; ++ /** Host-specific information */ ++ dwc_otg_host_if_t *host_if; ++ ++ /** Value from SNPSID register */ ++ uint32_t snpsid; ++ ++ /* ++ * Set to 1 if the core PHY interface bits in USBCFG have been ++ * initialized. ++ */ ++ uint8_t phy_init_done; ++ ++ /* ++ * SRP Success flag, set by srp success interrupt in FS I2C mode ++ */ ++ uint8_t srp_success; ++ uint8_t srp_timer_started; ++ /** Timer for SRP. If it expires before SRP is successful ++ * clear the SRP. */ ++ dwc_timer_t *srp_timer; ++ ++#ifdef DWC_DEV_SRPCAP ++ /* This timer is needed to power on the hibernated host core if SRP is not ++ * initiated on connected SRP capable device for limited period of time ++ */ ++ uint8_t pwron_timer_started; ++ dwc_timer_t *pwron_timer; ++#endif ++ /* Common configuration information */ ++ /** Power and Clock Gating Control Register */ ++ volatile uint32_t *pcgcctl; ++#define DWC_OTG_PCGCCTL_OFFSET 0xE00 ++ ++ /** Push/pop addresses for endpoints or host channels.*/ ++ uint32_t *data_fifo[MAX_EPS_CHANNELS]; ++#define DWC_OTG_DATA_FIFO_OFFSET 0x1000 ++#define DWC_OTG_DATA_FIFO_SIZE 0x1000 ++ ++ /** Total RAM for FIFOs (Bytes) */ ++ uint16_t total_fifo_size; ++ /** Size of Rx FIFO (Bytes) */ ++ uint16_t rx_fifo_size; ++ /** Size of Non-periodic Tx FIFO (Bytes) */ ++ uint16_t nperio_tx_fifo_size; ++ ++ /** 1 if DMA is enabled, 0 otherwise. */ ++ uint8_t dma_enable; ++ ++ /** 1 if DMA descriptor is enabled, 0 otherwise. */ ++ uint8_t dma_desc_enable; ++ ++ /** 1 if PTI Enhancement mode is enabled, 0 otherwise. */ ++ uint8_t pti_enh_enable; ++ ++ /** 1 if MPI Enhancement mode is enabled, 0 otherwise. */ ++ uint8_t multiproc_int_enable; ++ ++ /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */ ++ uint8_t en_multiple_tx_fifo; ++ ++ /** Set to 1 if multiple packets of a high-bandwidth transfer is in ++ * process of being queued */ ++ uint8_t queuing_high_bandwidth; ++ ++ /** Hardware Configuration -- stored here for convenience.*/ ++ hwcfg1_data_t hwcfg1; ++ hwcfg2_data_t hwcfg2; ++ hwcfg3_data_t hwcfg3; ++ hwcfg4_data_t hwcfg4; ++ fifosize_data_t hptxfsiz; ++ ++ /** Host and Device Configuration -- stored here for convenience.*/ ++ hcfg_data_t hcfg; ++ dcfg_data_t dcfg; ++ ++ /** The operational State, during transations ++ * (a_host>>a_peripherial and b_device=>b_host) this may not ++ * match the core but allows the software to determine ++ * transitions. ++ */ ++ uint8_t op_state; ++ ++ /** ++ * Set to 1 if the HCD needs to be restarted on a session request ++ * interrupt. This is required if no connector ID status change has ++ * occurred since the HCD was last disconnected. ++ */ ++ uint8_t restart_hcd_on_session_req; ++ ++ /** HCD callbacks */ ++ /** A-Device is a_host */ ++#define A_HOST (1) ++ /** A-Device is a_suspend */ ++#define A_SUSPEND (2) ++ /** A-Device is a_peripherial */ ++#define A_PERIPHERAL (3) ++ /** B-Device is operating as a Peripheral. */ ++#define B_PERIPHERAL (4) ++ /** B-Device is operating as a Host. */ ++#define B_HOST (5) ++ ++ /** HCD callbacks */ ++ struct dwc_otg_cil_callbacks *hcd_cb; ++ /** PCD callbacks */ ++ struct dwc_otg_cil_callbacks *pcd_cb; ++ ++ /** Device mode Periodic Tx FIFO Mask */ ++ uint32_t p_tx_msk; ++ /** Device mode Periodic Tx FIFO Mask */ ++ uint32_t tx_msk; ++ ++ /** Workqueue object used for handling several interrupts */ ++ dwc_workq_t *wq_otg; ++ ++ /** Timer object used for handling "Wakeup Detected" Interrupt */ ++ dwc_timer_t *wkp_timer; ++ /** This arrays used for debug purposes for DEV OUT NAK enhancement */ ++ uint32_t start_doeptsiz_val[MAX_EPS_CHANNELS]; ++ ep_xfer_info_t ep_xfer_info[MAX_EPS_CHANNELS]; ++ dwc_timer_t *ep_xfer_timer[MAX_EPS_CHANNELS]; ++#ifdef DEBUG ++ uint32_t start_hcchar_val[MAX_EPS_CHANNELS]; ++ ++ hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS]; ++ dwc_timer_t *hc_xfer_timer[MAX_EPS_CHANNELS]; ++ ++ uint32_t hfnum_7_samples; ++ uint64_t hfnum_7_frrem_accum; ++ uint32_t hfnum_0_samples; ++ uint64_t hfnum_0_frrem_accum; ++ uint32_t hfnum_other_samples; ++ uint64_t hfnum_other_frrem_accum; ++#endif ++ ++#ifdef DWC_UTE_CFI ++ uint16_t pwron_rxfsiz; ++ uint16_t pwron_gnptxfsiz; ++ uint16_t pwron_txfsiz[15]; ++ ++ uint16_t init_rxfsiz; ++ uint16_t init_gnptxfsiz; ++ uint16_t init_txfsiz[15]; ++#endif ++ ++ /** Lx state of device */ ++ dwc_otg_lx_state_e lx_state; ++ ++ /** Saved Core Global registers */ ++ struct dwc_otg_global_regs_backup *gr_backup; ++ /** Saved Host registers */ ++ struct dwc_otg_host_regs_backup *hr_backup; ++ /** Saved Device registers */ ++ struct dwc_otg_dev_regs_backup *dr_backup; ++ ++ /** Power Down Enable */ ++ uint32_t power_down; ++ ++ /** ADP support Enable */ ++ uint32_t adp_enable; ++ ++ /** ADP structure object */ ++ dwc_otg_adp_t adp; ++ ++ /** hibernation/suspend flag */ ++ int hibernation_suspend; ++ ++ /** Device mode extended hibernation flag */ ++ int xhib; ++ ++ /** OTG revision supported */ ++ uint32_t otg_ver; ++ ++ /** OTG status flag used for HNP polling */ ++ uint8_t otg_sts; ++ ++ /** Pointer to either hcd->lock or pcd->lock */ ++ dwc_spinlock_t *lock; ++ ++ /** Start predict NextEP based on Learning Queue if equal 1, ++ * also used as counter of disabled NP IN EP's */ ++ uint8_t start_predict; ++ ++ /** NextEp sequence, including EP0: nextep_seq[] = EP if non-periodic and ++ * active, 0xff otherwise */ ++ uint8_t nextep_seq[MAX_EPS_CHANNELS]; ++ ++ /** Index of fisrt EP in nextep_seq array which should be re-enabled **/ ++ uint8_t first_in_nextep_seq; ++ ++ /** Frame number while entering to ISR - needed for ISOCs **/ ++ uint32_t frame_num; ++ ++}; ++ ++#ifdef DEBUG ++/* ++ * This function is called when transfer is timed out. ++ */ ++extern void hc_xfer_timeout(void *ptr); ++#endif ++ ++/* ++ * This function is called when transfer is timed out on endpoint. ++ */ ++extern void ep_xfer_timeout(void *ptr); ++ ++/* ++ * The following functions are functions for works ++ * using during handling some interrupts ++ */ ++extern void w_conn_id_status_change(void *p); ++ ++extern void w_wakeup_detected(void *p); ++ ++/** Saves global register values into system memory. */ ++extern int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if); ++/** Saves device register values into system memory. */ ++extern int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if); ++/** Saves host register values into system memory. */ ++extern int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if); ++/** Restore global register values. */ ++extern int dwc_otg_restore_global_regs(dwc_otg_core_if_t * core_if); ++/** Restore host register values. */ ++extern int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset); ++/** Restore device register values. */ ++extern int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if, ++ int rem_wakeup); ++extern int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if); ++extern int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode, ++ int is_host); ++ ++extern int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if, ++ int restore_mode, int reset); ++extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, ++ int rem_wakeup, int reset); ++ ++/* ++ * The following functions support initialization of the CIL driver component ++ * and the DWC_otg controller. ++ */ ++extern void dwc_otg_core_host_init(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_core_dev_init(dwc_otg_core_if_t * _core_if); ++ ++/** @name Device CIL Functions ++ * The following functions support managing the DWC_otg controller in device ++ * mode. ++ */ ++/**@{*/ ++extern void dwc_otg_wakeup(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_read_setup_packet(dwc_otg_core_if_t * _core_if, ++ uint32_t * _dest); ++extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_ep0_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); ++extern void dwc_otg_ep_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); ++extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); ++extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep, int _dma); ++extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); ++extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * _core_if, ++ dwc_ep_t * _ep); ++extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * _core_if); ++ ++#ifdef DWC_EN_ISOC ++extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep); ++extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep); ++#endif /* DWC_EN_ISOC */ ++/**@}*/ ++ ++/** @name Host CIL Functions ++ * The following functions support managing the DWC_otg controller in host ++ * mode. ++ */ ++/**@{*/ ++extern void dwc_otg_hc_init(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); ++extern void dwc_otg_hc_halt(dwc_otg_core_if_t * _core_if, ++ dwc_hc_t * _hc, dwc_otg_halt_status_e _halt_status); ++extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); ++extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_hc_t * _hc); ++extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * _core_if, ++ dwc_hc_t * _hc); ++extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); ++extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t * _core_if, ++ dwc_hc_t * _hc); ++extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * _core_if); ++ ++extern void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, ++ dwc_hc_t * hc); ++ ++extern uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if); ++ ++/* Macro used to clear one channel interrupt */ ++#define clear_hc_int(_hc_regs_, _intr_) \ ++do { \ ++ hcint_data_t hcint_clear = {.d32 = 0}; \ ++ hcint_clear.b._intr_ = 1; \ ++ DWC_WRITE_REG32(&(_hc_regs_)->hcint, hcint_clear.d32); \ ++} while (0) ++ ++/* ++ * Macro used to disable one channel interrupt. Channel interrupts are ++ * disabled when the channel is halted or released by the interrupt handler. ++ * There is no need to handle further interrupts of that type until the ++ * channel is re-assigned. In fact, subsequent handling may cause crashes ++ * because the channel structures are cleaned up when the channel is released. ++ */ ++#define disable_hc_int(_hc_regs_, _intr_) \ ++do { \ ++ hcintmsk_data_t hcintmsk = {.d32 = 0}; \ ++ hcintmsk.b._intr_ = 1; \ ++ DWC_MODIFY_REG32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \ ++} while (0) ++ ++/** ++ * This function Reads HPRT0 in preparation to modify. It keeps the ++ * WC bits 0 so that if they are read as 1, they won't clear when you ++ * write it back ++ */ ++static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t * _core_if) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = DWC_READ_REG32(_core_if->host_if->hprt0); ++ hprt0.b.prtena = 0; ++ hprt0.b.prtconndet = 0; ++ hprt0.b.prtenchng = 0; ++ hprt0.b.prtovrcurrchng = 0; ++ return hprt0.d32; ++} ++ ++/**@}*/ ++ ++/** @name Common CIL Functions ++ * The following functions support managing the DWC_otg controller in either ++ * device or host mode. ++ */ ++/**@{*/ ++ ++extern void dwc_otg_read_packet(dwc_otg_core_if_t * core_if, ++ uint8_t * dest, uint16_t bytes); ++ ++extern void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * _core_if, const int _num); ++extern void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_core_reset(dwc_otg_core_if_t * _core_if); ++ ++/** ++ * This function returns the Core Interrupt register. ++ */ ++static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t * core_if) ++{ ++ return (DWC_READ_REG32(&core_if->core_global_regs->gintsts) & ++ DWC_READ_REG32(&core_if->core_global_regs->gintmsk)); ++} ++ ++/** ++ * This function returns the OTG Interrupt register. ++ */ ++static inline uint32_t dwc_otg_read_otg_intr(dwc_otg_core_if_t * core_if) ++{ ++ return (DWC_READ_REG32(&core_if->core_global_regs->gotgint)); ++} ++ ++/** ++ * This function reads the Device All Endpoints Interrupt register and ++ * returns the IN endpoint interrupt bits. ++ */ ++static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t * ++ core_if) ++{ ++ ++ uint32_t v; ++ ++ if (core_if->multiproc_int_enable) { ++ v = DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->deachint) & ++ DWC_READ_REG32(&core_if-> ++ dev_if->dev_global_regs->deachintmsk); ++ } else { ++ v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) & ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); ++ } ++ return (v & 0xffff); ++} ++ ++/** ++ * This function reads the Device All Endpoints Interrupt register and ++ * returns the OUT endpoint interrupt bits. ++ */ ++static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t * ++ core_if) ++{ ++ uint32_t v; ++ ++ if (core_if->multiproc_int_enable) { ++ v = DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->deachint) & ++ DWC_READ_REG32(&core_if-> ++ dev_if->dev_global_regs->deachintmsk); ++ } else { ++ v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) & ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); ++ } ++ ++ return ((v & 0xffff0000) >> 16); ++} ++ ++/** ++ * This function returns the Device IN EP Interrupt register ++ */ ++static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ uint32_t v, msk, emp; ++ ++ if (core_if->multiproc_int_enable) { ++ msk = ++ DWC_READ_REG32(&dev_if-> ++ dev_global_regs->diepeachintmsk[ep->num]); ++ emp = ++ DWC_READ_REG32(&dev_if-> ++ dev_global_regs->dtknqr4_fifoemptymsk); ++ msk |= ((emp >> ep->num) & 0x1) << 7; ++ v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; ++ } else { ++ msk = DWC_READ_REG32(&dev_if->dev_global_regs->diepmsk); ++ emp = ++ DWC_READ_REG32(&dev_if-> ++ dev_global_regs->dtknqr4_fifoemptymsk); ++ msk |= ((emp >> ep->num) & 0x1) << 7; ++ v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; ++ } ++ ++ return v; ++} ++ ++/** ++ * This function returns the Device OUT EP Interrupt register ++ */ ++static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t * ++ _core_if, dwc_ep_t * _ep) ++{ ++ dwc_otg_dev_if_t *dev_if = _core_if->dev_if; ++ uint32_t v; ++ doepmsk_data_t msk = {.d32 = 0 }; ++ ++ if (_core_if->multiproc_int_enable) { ++ msk.d32 = ++ DWC_READ_REG32(&dev_if-> ++ dev_global_regs->doepeachintmsk[_ep->num]); ++ if (_core_if->pti_enh_enable) { ++ msk.b.pktdrpsts = 1; ++ } ++ v = DWC_READ_REG32(&dev_if-> ++ out_ep_regs[_ep->num]->doepint) & msk.d32; ++ } else { ++ msk.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->doepmsk); ++ if (_core_if->pti_enh_enable) { ++ msk.b.pktdrpsts = 1; ++ } ++ v = DWC_READ_REG32(&dev_if-> ++ out_ep_regs[_ep->num]->doepint) & msk.d32; ++ } ++ return v; ++} ++ ++/** ++ * This function returns the Host All Channel Interrupt register ++ */ ++static inline uint32_t dwc_otg_read_host_all_channels_intr(dwc_otg_core_if_t * ++ _core_if) ++{ ++ return (DWC_READ_REG32(&_core_if->host_if->host_global_regs->haint)); ++} ++ ++static inline uint32_t dwc_otg_read_host_channel_intr(dwc_otg_core_if_t * ++ _core_if, dwc_hc_t * _hc) ++{ ++ return (DWC_READ_REG32 ++ (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint)); ++} ++ ++/** ++ * This function returns the mode of the operation, host or device. ++ * ++ * @return 0 - Device Mode, 1 - Host Mode ++ */ ++static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t * _core_if) ++{ ++ return (DWC_READ_REG32(&_core_if->core_global_regs->gintsts) & 0x1); ++} ++ ++/**@}*/ ++ ++/** ++ * DWC_otg CIL callback structure. This structure allows the HCD and ++ * PCD to register functions used for starting and stopping the PCD ++ * and HCD for role change on for a DRD. ++ */ ++typedef struct dwc_otg_cil_callbacks { ++ /** Start function for role change */ ++ int (*start) (void *_p); ++ /** Stop Function for role change */ ++ int (*stop) (void *_p); ++ /** Disconnect Function for role change */ ++ int (*disconnect) (void *_p); ++ /** Resume/Remote wakeup Function */ ++ int (*resume_wakeup) (void *_p); ++ /** Suspend function */ ++ int (*suspend) (void *_p); ++ /** Session Start (SRP) */ ++ int (*session_start) (void *_p); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ /** Sleep (switch to L0 state) */ ++ int (*sleep) (void *_p); ++#endif ++ /** Pointer passed to start() and stop() */ ++ void *p; ++} dwc_otg_cil_callbacks_t; ++ ++extern void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * _core_if, ++ dwc_otg_cil_callbacks_t * _cb, ++ void *_p); ++extern void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * _core_if, ++ dwc_otg_cil_callbacks_t * _cb, ++ void *_p); ++ ++void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if); ++ ++////////////////////////////////////////////////////////////////////// ++/** Start the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_start(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->start) { ++ core_if->hcd_cb->start(core_if->hcd_cb->p); ++ } ++} ++ ++/** Stop the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_stop(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->stop) { ++ core_if->hcd_cb->stop(core_if->hcd_cb->p); ++ } ++} ++ ++/** Disconnect the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_disconnect(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->disconnect) { ++ core_if->hcd_cb->disconnect(core_if->hcd_cb->p); ++ } ++} ++ ++/** Inform the HCD the a New Session has begun. Helper function for ++ * using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_session_start(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->session_start) { ++ core_if->hcd_cb->session_start(core_if->hcd_cb->p); ++ } ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** ++ * Inform the HCD about LPM sleep. ++ * Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_sleep(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->sleep) { ++ core_if->hcd_cb->sleep(core_if->hcd_cb->p); ++ } ++} ++#endif ++ ++/** Resume the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_hcd_resume(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->resume_wakeup) { ++ core_if->hcd_cb->resume_wakeup(core_if->hcd_cb->p); ++ } ++} ++ ++/** Start the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_pcd_start(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->start) { ++ core_if->pcd_cb->start(core_if->pcd_cb->p); ++ } ++} ++ ++/** Stop the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_pcd_stop(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->stop) { ++ core_if->pcd_cb->stop(core_if->pcd_cb->p); ++ } ++} ++ ++/** Suspend the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_pcd_suspend(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->suspend) { ++ core_if->pcd_cb->suspend(core_if->pcd_cb->p); ++ } ++} ++ ++/** Resume the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void cil_pcd_resume(dwc_otg_core_if_t * core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); ++ } ++} ++ ++////////////////////////////////////////////////////////////////////// ++ ++#endif +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c +@@ -0,0 +1,1594 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $ ++ * $Revision: #32 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * The Core Interface Layer provides basic services for accessing and ++ * managing the DWC_otg hardware. These services are used by both the ++ * Host Controller Driver and the Peripheral Controller Driver. ++ * ++ * This file contains the Common Interrupt handlers. ++ */ ++#include "dwc_os.h" ++#include "dwc_otg_regs.h" ++#include "dwc_otg_cil.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_pcd.h" ++#include "dwc_otg_hcd.h" ++ ++#ifdef DEBUG ++inline const char *op_state_str(dwc_otg_core_if_t * core_if) ++{ ++ return (core_if->op_state == A_HOST ? "a_host" : ++ (core_if->op_state == A_SUSPEND ? "a_suspend" : ++ (core_if->op_state == A_PERIPHERAL ? "a_peripheral" : ++ (core_if->op_state == B_PERIPHERAL ? "b_peripheral" : ++ (core_if->op_state == B_HOST ? "b_host" : "unknown"))))); ++} ++#endif ++ ++/** This function will log a debug message ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_mode_mismatch_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n", ++ dwc_otg_mode(core_if) ? "Host" : "Device"); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.modemismatch = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This function handles the OTG Interrupts. It reads the OTG ++ * Interrupt Register (GOTGINT) to determine what interrupt has ++ * occurred. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gotgint_data_t gotgint; ++ gotgctl_data_t gotgctl; ++ gintmsk_data_t gintmsk; ++ gpwrdn_data_t gpwrdn; ++ ++ gotgint.d32 = DWC_READ_REG32(&global_regs->gotgint); ++ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); ++ DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32, ++ op_state_str(core_if)); ++ ++ if (gotgint.b.sesenddet) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "Session End Detected++ (%s)\n", ++ op_state_str(core_if)); ++ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); ++ ++ if (core_if->op_state == B_HOST) { ++ cil_pcd_start(core_if); ++ core_if->op_state = B_PERIPHERAL; ++ } else { ++ /* If not B_HOST and Device HNP still set. HNP ++ * Did not succeed!*/ ++ if (gotgctl.b.devhnpen) { ++ DWC_DEBUGPL(DBG_ANY, "Session End Detected\n"); ++ __DWC_ERROR("Device Not Connected/Responding!\n"); ++ } ++ ++ /* If Session End Detected the B-Cable has ++ * been disconnected. */ ++ /* Reset PCD and Gadget driver to a ++ * clean state. */ ++ core_if->lx_state = DWC_OTG_L0; ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_pcd_stop(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ ++ if (core_if->adp_enable) { ++ if (core_if->power_down == 2) { ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs-> ++ gpwrdn, gpwrdn.d32, 0); ++ } ++ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ ++ dwc_otg_adp_sense_start(core_if); ++ } ++ } ++ ++ gotgctl.d32 = 0; ++ gotgctl.b.devhnpen = 1; ++ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); ++ } ++ if (gotgint.b.sesreqsucstschng) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "Session Reqeust Success Status Change++\n"); ++ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); ++ if (gotgctl.b.sesreqscs) { ++ ++ if ((core_if->core_params->phy_type == ++ DWC_PHY_TYPE_PARAM_FS) && (core_if->core_params->i2c_enable)) { ++ core_if->srp_success = 1; ++ } else { ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_pcd_resume(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ /* Clear Session Request */ ++ gotgctl.d32 = 0; ++ gotgctl.b.sesreq = 1; ++ DWC_MODIFY_REG32(&global_regs->gotgctl, ++ gotgctl.d32, 0); ++ } ++ } ++ } ++ if (gotgint.b.hstnegsucstschng) { ++ /* Print statements during the HNP interrupt handling ++ * can cause it to fail.*/ ++ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); ++ /* WA for 3.00a- HW is not setting cur_mode, even sometimes ++ * this does not help*/ ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) ++ dwc_udelay(100); ++ if (gotgctl.b.hstnegscs) { ++ if (dwc_otg_is_host_mode(core_if)) { ++ core_if->op_state = B_HOST; ++ /* ++ * Need to disable SOF interrupt immediately. ++ * When switching from device to host, the PCD ++ * interrupt handler won't handle the ++ * interrupt if host mode is already set. The ++ * HCD interrupt handler won't get called if ++ * the HCD state is HALT. This means that the ++ * interrupt does not get handled and Linux ++ * complains loudly. ++ */ ++ gintmsk.d32 = 0; ++ gintmsk.b.sofintr = 1; ++ DWC_MODIFY_REG32(&global_regs->gintmsk, ++ gintmsk.d32, 0); ++ /* Call callback function with spin lock released */ ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_pcd_stop(core_if); ++ /* ++ * Initialize the Core for Host mode. ++ */ ++ cil_hcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = B_HOST; ++ } ++ } else { ++ gotgctl.d32 = 0; ++ gotgctl.b.hnpreq = 1; ++ gotgctl.b.devhnpen = 1; ++ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); ++ DWC_DEBUGPL(DBG_ANY, "HNP Failed\n"); ++ __DWC_ERROR("Device Not Connected/Responding\n"); ++ } ++ } ++ if (gotgint.b.hstnegdet) { ++ /* The disconnect interrupt is set at the same time as ++ * Host Negotiation Detected. During the mode ++ * switch all interrupts are cleared so the disconnect ++ * interrupt handler will not get executed. ++ */ ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "Host Negotiation Detected++ (%s)\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : ++ "Device")); ++ if (dwc_otg_is_device_mode(core_if)) { ++ DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n", ++ core_if->op_state); ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_hcd_disconnect(core_if); ++ cil_pcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = A_PERIPHERAL; ++ } else { ++ /* ++ * Need to disable SOF interrupt immediately. When ++ * switching from device to host, the PCD interrupt ++ * handler won't handle the interrupt if host mode is ++ * already set. The HCD interrupt handler won't get ++ * called if the HCD state is HALT. This means that ++ * the interrupt does not get handled and Linux ++ * complains loudly. ++ */ ++ gintmsk.d32 = 0; ++ gintmsk.b.sofintr = 1; ++ DWC_MODIFY_REG32(&global_regs->gintmsk, gintmsk.d32, 0); ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_pcd_stop(core_if); ++ cil_hcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = A_HOST; ++ } ++ } ++ if (gotgint.b.adevtoutchng) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "A-Device Timeout Change++\n"); ++ } ++ if (gotgint.b.debdone) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " "Debounce Done++\n"); ++ } ++ ++ /* Clear GOTGINT */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, gotgint.d32); ++ ++ return 1; ++} ++ ++void w_conn_id_status_change(void *p) ++{ ++ dwc_otg_core_if_t *core_if = p; ++ uint32_t count = 0; ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ ++ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32); ++ DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts); ++ ++ /* B-Device connector (Device Mode) */ ++ if (gotgctl.b.conidsts) { ++ /* Wait for switch to device mode. */ ++ while (!dwc_otg_is_device_mode(core_if)) { ++ DWC_PRINTF("Waiting for Peripheral Mode, Mode=%s\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : ++ "Peripheral")); ++ dwc_mdelay(100); ++ if (++count > 10000) ++ break; ++ } ++ DWC_ASSERT(++count < 10000, ++ "Connection id status change timed out"); ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } else { ++ /* A-Device connector (Host Mode) */ ++ while (!dwc_otg_is_host_mode(core_if)) { ++ DWC_PRINTF("Waiting for Host Mode, Mode=%s\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : ++ "Peripheral")); ++ dwc_mdelay(100); ++ if (++count > 10000) ++ break; ++ } ++ DWC_ASSERT(++count < 10000, ++ "Connection id status change timed out"); ++ core_if->op_state = A_HOST; ++ /* ++ * Initialize the Core for Host mode. ++ */ ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ } ++} ++ ++/** ++ * This function handles the Connector ID Status Change Interrupt. It ++ * reads the OTG Interrupt Register (GOTCTL) to determine whether this ++ * is a Device to Host Mode transition or a Host Mode to Device ++ * Transition. ++ * ++ * This only occurs when the cable is connected/removed from the PHY ++ * connector. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t * core_if) ++{ ++ ++ /* ++ * Need to disable SOF interrupt immediately. If switching from device ++ * to host, the PCD interrupt handler won't handle the interrupt if ++ * host mode is already set. The HCD interrupt handler won't get ++ * called if the HCD state is HALT. This means that the interrupt does ++ * not get handled and Linux complains loudly. ++ */ ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ gintsts_data_t gintsts = {.d32 = 0 }; ++ ++ gintmsk.b.sofintr = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0); ++ ++ DWC_DEBUGPL(DBG_CIL, ++ " ++Connector ID Status Change Interrupt++ (%s)\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : "Device")); ++ ++ DWC_SPINUNLOCK(core_if->lock); ++ ++ /* ++ * Need to schedule a work, as there are possible DELAY function calls ++ * Release lock before scheduling workq as it holds spinlock during scheduling ++ */ ++ ++ DWC_WORKQ_SCHEDULE(core_if->wq_otg, w_conn_id_status_change, ++ core_if, "connection id status change"); ++ DWC_SPINLOCK(core_if->lock); ++ ++ /* Set flag and clear interrupt */ ++ gintsts.b.conidstschng = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that a device is initiating the Session ++ * Request Protocol to request the host to turn on bus power so a new ++ * session can begin. The handler responds by turning on bus power. If ++ * the DWC_otg controller is in low power mode, the handler brings the ++ * controller out of low power mode before turning on bus power. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ ++#ifndef DWC_HOST_ONLY ++ DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n"); ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ DWC_PRINTF("SRP: Device mode\n"); ++ } else { ++ hprt0_data_t hprt0; ++ DWC_PRINTF("SRP: Host mode\n"); ++ ++ /* Turn on the port power bit. */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* Start the Connection timer. So a message can be displayed ++ * if connect does not occur within 10 seconds. */ ++ cil_hcd_session_start(core_if); ++ } ++#endif ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.sessreqintr = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++void w_wakeup_detected(void *p) ++{ ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) p; ++ /* ++ * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms ++ * so that OPT tests pass with all PHYs). ++ */ ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++#if 0 ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ /* Restart the Phy Clock */ ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ dwc_udelay(10); ++#endif //0 ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ DWC_DEBUGPL(DBG_ANY, "Resume: HPRT0=%0x\n", hprt0.d32); ++// dwc_mdelay(70); ++ hprt0.b.prtres = 0; /* Resume */ ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ DWC_DEBUGPL(DBG_ANY, "Clear Resume: HPRT0=%0x\n", ++ DWC_READ_REG32(core_if->host_if->hprt0)); ++ ++ cil_hcd_resume(core_if); ++ ++ /** Change to L0 state*/ ++ core_if->lx_state = DWC_OTG_L0; ++} ++ ++/** ++ * This interrupt indicates that the DWC_otg controller has detected a ++ * resume or remote wakeup sequence. If the DWC_otg controller is in ++ * low power mode, the handler must brings the controller out of low ++ * power mode. The controller automatically begins resume ++ * signaling. The handler schedules a time to stop resume signaling. ++ */ ++int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ ++ DWC_DEBUGPL(DBG_ANY, ++ "++Resume and Remote Wakeup Detected Interrupt++\n"); ++ ++ DWC_PRINTF("%s lxstate = %d\n", __func__, core_if->lx_state); ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs-> ++ dsts)); ++ if (core_if->lx_state == DWC_OTG_L2) { ++#ifdef PARTIAL_POWER_DOWN ++ if (core_if->hwcfg4.b.power_optimiz) { ++ pcgcctl_data_t power = {.d32 = 0 }; ++ ++ power.d32 = DWC_READ_REG32(core_if->pcgcctl); ++ DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", ++ power.d32); ++ ++ power.b.stoppclk = 0; ++ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); ++ ++ power.b.pwrclmp = 0; ++ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); ++ ++ power.b.rstpdwnmodule = 0; ++ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); ++ } ++#endif ++ /* Clear the Remote Wakeup Signaling */ ++ dctl.b.rmtwkupsig = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ dctl, dctl.d32, 0); ++ ++ DWC_SPINUNLOCK(core_if->lock); ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); ++ } ++ DWC_SPINLOCK(core_if->lock); ++ } else { ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.hird_thres &= (~(1 << 4)); ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, ++ lpmcfg.d32); ++ } ++ /** Change to L0 state*/ ++ core_if->lx_state = DWC_OTG_L0; ++ } else { ++ if (core_if->lx_state != DWC_OTG_L1) { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ ++ /* Restart the Phy Clock */ ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ DWC_TIMER_SCHEDULE(core_if->wkp_timer, 71); ++ } else { ++ /** Change to L0 state*/ ++ core_if->lx_state = DWC_OTG_L0; ++ } ++ } ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.wkupintr = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that the Wakeup Logic has detected a ++ * Device disconnect. ++ */ ++static int32_t dwc_otg_handle_pwrdn_disconnect_intr(dwc_otg_core_if_t *core_if) ++{ ++ gpwrdn_data_t gpwrdn = { .d32 = 0 }; ++ gpwrdn_data_t gpwrdn_temp = { .d32 = 0 }; ++ gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ ++ DWC_PRINTF("%s called\n", __FUNCTION__); ++ ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++ ++ /* Switch on the voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Disable power clamps*/ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Remove reset the core signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ core_if->hibernation_suspend = 0; ++ ++ /* Disable PMU */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ if (gpwrdn_temp.b.idsts) { ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } else { ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ } ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that the Wakeup Logic has detected a ++ * remote wakeup sequence. ++ */ ++static int32_t dwc_otg_handle_pwrdn_wakeup_detected_intr(dwc_otg_core_if_t * core_if) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ DWC_DEBUGPL(DBG_ANY, ++ "++Powerdown Remote Wakeup Detected Interrupt++\n"); ++ ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++ ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (gpwrdn.b.idsts) { // Device Mode ++ if ((core_if->power_down == 2) ++ && (core_if->hibernation_suspend == 1)) { ++ dwc_otg_device_hibernation_restore(core_if, 0, 0); ++ } ++ } else { ++ if ((core_if->power_down == 2) ++ && (core_if->hibernation_suspend == 1)) { ++ dwc_otg_host_hibernation_restore(core_if, 1, 0); ++ } ++ } ++ return 1; ++} ++ ++static int32_t dwc_otg_handle_pwrdn_idsts_change(dwc_otg_device_t *otg_dev) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn_temp = {.d32 = 0 }; ++ dwc_otg_core_if_t *core_if = otg_dev->core_if; ++ ++ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__); ++ gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (core_if->power_down == 2) { ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++ DWC_DEBUGPL(DBG_ANY, "Exit from hibernation on ID sts change\n"); ++ /* Switch on the voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Remove reset the core signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /*Indicates that we are exiting from hibernation */ ++ core_if->hibernation_suspend = 0; ++ ++ /* Disable PMU */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ gpwrdn.d32 = core_if->gr_backup->gpwrdn_local; ++ if (gpwrdn.b.dis_vbus == 1) { ++ gpwrdn.d32 = 0; ++ gpwrdn.b.dis_vbus = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ } ++ ++ if (gpwrdn_temp.b.idsts) { ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } else { ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ } ++ } ++ ++ if (core_if->adp_enable) { ++ uint8_t is_host = 0; ++ DWC_SPINUNLOCK(core_if->lock); ++ /* Change the core_if's lock to hcd/pcd lock depend on mode? */ ++#ifndef DWC_HOST_ONLY ++ if (gpwrdn_temp.b.idsts) ++ core_if->lock = otg_dev->pcd->lock; ++#endif ++#ifndef DWC_DEVICE_ONLY ++ if (!gpwrdn_temp.b.idsts) { ++ core_if->lock = otg_dev->hcd->lock; ++ is_host = 1; ++ } ++#endif ++ DWC_PRINTF("RESTART ADP\n"); ++ if (core_if->adp.probe_enabled) ++ dwc_otg_adp_probe_stop(core_if); ++ if (core_if->adp.sense_enabled) ++ dwc_otg_adp_sense_stop(core_if); ++ if (core_if->adp.sense_timer_started) ++ DWC_TIMER_CANCEL(core_if->adp.sense_timer); ++ if (core_if->adp.vbuson_timer_started) ++ DWC_TIMER_CANCEL(core_if->adp.vbuson_timer); ++ core_if->adp.probe_timer_values[0] = -1; ++ core_if->adp.probe_timer_values[1] = -1; ++ core_if->adp.sense_timer_started = 0; ++ core_if->adp.vbuson_timer_started = 0; ++ core_if->adp.probe_counter = 0; ++ core_if->adp.gpwrdn = 0; ++ ++ /* Disable PMU and restart ADP */ ++ gpwrdn_temp.d32 = 0; ++ gpwrdn_temp.b.pmuactv = 1; ++ gpwrdn_temp.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ DWC_PRINTF("Check point 1\n"); ++ dwc_mdelay(110); ++ dwc_otg_adp_start(core_if, is_host); ++ DWC_SPINLOCK(core_if->lock); ++ } ++ ++ ++ return 1; ++} ++ ++static int32_t dwc_otg_handle_pwrdn_session_change(dwc_otg_core_if_t * core_if) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ int32_t otg_cap_param = core_if->core_params->otg_cap; ++ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__); ++ ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (core_if->power_down == 2) { ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++ ++ if ((otg_cap_param != DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE || ++ otg_cap_param != DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) && ++ gpwrdn.b.bsessvld == 0) { ++ /* Save gpwrdn register for further usage if stschng interrupt */ ++ core_if->gr_backup->gpwrdn_local = ++ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ /*Exit from ISR and wait for stschng interrupt with bsessvld = 1 */ ++ return 1; ++ } ++ ++ /* Switch on the voltage to the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Remove reset the core signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /*Indicates that we are exiting from hibernation */ ++ core_if->hibernation_suspend = 0; ++ ++ /* Disable PMU */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE || ++ otg_cap_param == DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) { ++ /* ++ * Initiate SRP after initial ADP probe. ++ */ ++ dwc_otg_initiate_srp(core_if); ++ } ++ } ++ ++ return 1; ++} ++/** ++ * This interrupt indicates that the Wakeup Logic has detected a ++ * status change either on IDDIG or BSessVld. ++ */ ++static uint32_t dwc_otg_handle_pwrdn_stschng_intr(dwc_otg_device_t *otg_dev) ++{ ++ int retval; ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn_temp = {.d32 = 0 }; ++ dwc_otg_core_if_t *core_if = otg_dev->core_if; ++ ++ DWC_PRINTF("%s called\n", __FUNCTION__); ++ ++ if (core_if->power_down == 2) { ++ if (core_if->hibernation_suspend <= 0) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } else ++ gpwrdn_temp.d32 = core_if->gr_backup->gpwrdn_local; ++ ++ } else { ++ gpwrdn_temp.d32 = core_if->adp.gpwrdn; ++ } ++ ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ ++ if (gpwrdn.b.idsts ^ gpwrdn_temp.b.idsts) { ++ retval = dwc_otg_handle_pwrdn_idsts_change(otg_dev); ++ } else if (gpwrdn.b.bsessvld ^ gpwrdn_temp.b.bsessvld) { ++ retval = dwc_otg_handle_pwrdn_session_change(core_if); ++ } ++ ++ return retval; ++} ++ ++/** ++ * This interrupt indicates that the Wakeup Logic has detected a ++ * SRP. ++ */ ++static int32_t dwc_otg_handle_pwrdn_srp_intr(dwc_otg_core_if_t * core_if) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ ++ DWC_PRINTF("%s called\n", __FUNCTION__); ++ ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return 1; ++ } ++#ifdef DWC_DEV_SRPCAP ++ if (core_if->pwron_timer_started) { ++ core_if->pwron_timer_started = 0; ++ DWC_TIMER_CANCEL(core_if->pwron_timer); ++ } ++#endif ++ ++ /* Switch on the voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Remove reset the core signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Indicates that we are exiting from hibernation */ ++ core_if->hibernation_suspend = 0; ++ ++ /* Disable PMU */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Programm Disable VBUS to 0 */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.dis_vbus = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /*Initialize the core as Host */ ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++ ++ return 1; ++} ++ ++/** This interrupt indicates that restore command after Hibernation ++ * was completed by the core. */ ++int32_t dwc_otg_handle_restore_done_intr(dwc_otg_core_if_t * core_if) ++{ ++ pcgcctl_data_t pcgcctl; ++ DWC_DEBUGPL(DBG_ANY, "++Restore Done Interrupt++\n"); ++ ++ //TODO De-assert restore signal. 8.a ++ pcgcctl.d32 = DWC_READ_REG32(core_if->pcgcctl); ++ if (pcgcctl.b.restoremode == 1) { ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ /* ++ * If restore mode is Remote Wakeup, ++ * unmask Remote Wakeup interrupt. ++ */ ++ gintmsk.b.wkupintr = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, ++ 0, gintmsk.d32); ++ } ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that a device has been disconnected from ++ * the root port. ++ */ ++int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t * core_if) ++{ ++ gintsts_data_t gintsts; ++ ++ DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n", ++ (dwc_otg_is_host_mode(core_if) ? "Host" : "Device"), ++ op_state_str(core_if)); ++ ++/** @todo Consolidate this if statement. */ ++#ifndef DWC_HOST_ONLY ++ if (core_if->op_state == B_HOST) { ++ /* If in device mode Disconnect and stop the HCD, then ++ * start the PCD. */ ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_hcd_disconnect(core_if); ++ cil_pcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = B_PERIPHERAL; ++ } else if (dwc_otg_is_device_mode(core_if)) { ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ gotgctl.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gotgctl); ++ if (gotgctl.b.hstsethnpen == 1) { ++ /* Do nothing, if HNP in process the OTG ++ * interrupt "Host Negotiation Detected" ++ * interrupt will do the mode switch. ++ */ ++ } else if (gotgctl.b.devhnpen == 0) { ++ /* If in device mode Disconnect and stop the HCD, then ++ * start the PCD. */ ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_hcd_disconnect(core_if); ++ cil_pcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = B_PERIPHERAL; ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "!a_peripheral && !devhnpen\n"); ++ } ++ } else { ++ if (core_if->op_state == A_HOST) { ++ /* A-Cable still connected but device disconnected. */ ++ cil_hcd_disconnect(core_if); ++ if (core_if->adp_enable) { ++ gpwrdn_data_t gpwrdn = { .d32 = 0 }; ++ cil_hcd_stop(core_if); ++ /* Enable Power Down Logic */ ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_otg_adp_probe_start(core_if); ++ ++ /* Power off the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32 ++ (&core_if->core_global_regs->gpwrdn, ++ gpwrdn.d32, 0); ++ } ++ } ++ } ++ } ++#endif ++ /* Change to L3(OFF) state */ ++ core_if->lx_state = DWC_OTG_L3; ++ ++ gintsts.d32 = 0; ++ gintsts.b.disconnect = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that SUSPEND state has been detected on ++ * the USB. ++ * ++ * For HNP the USB Suspend interrupt signals the change from ++ * "a_peripheral" to "a_host". ++ * ++ * When power management is enabled the core will be put in low power ++ * mode. ++ */ ++int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t * core_if) ++{ ++ dsts_data_t dsts; ++ gintsts_data_t gintsts; ++ dcfg_data_t dcfg; ++ ++ DWC_DEBUGPL(DBG_ANY, "USB SUSPEND\n"); ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ /* Check the Device status register to determine if the Suspend ++ * state is active. */ ++ dsts.d32 = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32); ++ DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d " ++ "HWCFG4.power Optimize=%d\n", ++ dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz); ++ ++#ifdef PARTIAL_POWER_DOWN ++/** @todo Add a module parameter for power management. */ ++ ++ if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) { ++ pcgcctl_data_t power = {.d32 = 0 }; ++ DWC_DEBUGPL(DBG_CIL, "suspend\n"); ++ ++ power.b.pwrclmp = 1; ++ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); ++ ++ power.b.rstpdwnmodule = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32); ++ ++ power.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32); ++ ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "disconnect?\n"); ++ } ++#endif ++ /* PCD callback for suspend. Release the lock inside of callback function */ ++ cil_pcd_suspend(core_if); ++ if (core_if->power_down == 2) ++ { ++ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ DWC_DEBUGPL(DBG_ANY,"lx_state = %08x\n",core_if->lx_state); ++ DWC_DEBUGPL(DBG_ANY," device address = %08d\n",dcfg.b.devaddr); ++ ++ if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ gusbcfg_data_t gusbcfg = {.d32 = 0 }; ++ ++ /* Change to L2(suspend) state */ ++ core_if->lx_state = DWC_OTG_L2; ++ ++ /* Clear interrupt in gintsts */ ++ gintsts.d32 = 0; ++ gintsts.b.usbsuspend = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs-> ++ gintsts, gintsts.d32); ++ DWC_PRINTF("Start of hibernation completed\n"); ++ dwc_otg_save_global_regs(core_if); ++ dwc_otg_save_dev_regs(core_if); ++ ++ gusbcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs-> ++ gusbcfg); ++ if (gusbcfg.b.ulpi_utmi_sel == 1) { ++ /* ULPI interface */ ++ /* Suspend the Phy Clock */ ++ pcgcctl.d32 = 0; ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, ++ pcgcctl.d32); ++ dwc_udelay(10); ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ } else { ++ /* UTMI+ Interface */ ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, ++ pcgcctl.d32); ++ dwc_udelay(10); ++ } ++ ++ /* Set flag to indicate that we are in hibernation */ ++ core_if->hibernation_suspend = 1; ++ /* Enable interrupts from wake up logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Unmask device mode interrupts in GPWRDN */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.rst_det_msk = 1; ++ gpwrdn.b.lnstchng_msk = 1; ++ gpwrdn.b.sts_chngint_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Enable Power Down Clamp */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Switch off VDD */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ ++ /* Save gpwrdn register for further usage if stschng interrupt */ ++ core_if->gr_backup->gpwrdn_local = ++ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ DWC_PRINTF("Hibernation completed\n"); ++ ++ return 1; ++ } ++ } else if (core_if->power_down == 3) { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); ++ DWC_DEBUGPL(DBG_ANY, "lx_state = %08x\n",core_if->lx_state); ++ DWC_DEBUGPL(DBG_ANY, " device address = %08d\n",dcfg.b.devaddr); ++ ++ if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) { ++ DWC_DEBUGPL(DBG_ANY, "Start entering to extended hibernation\n"); ++ core_if->xhib = 1; ++ ++ /* Clear interrupt in gintsts */ ++ gintsts.d32 = 0; ++ gintsts.b.usbsuspend = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs-> ++ gintsts, gintsts.d32); ++ ++ dwc_otg_save_global_regs(core_if); ++ dwc_otg_save_dev_regs(core_if); ++ ++ /* Wait for 10 PHY clocks */ ++ dwc_udelay(10); ++ ++ /* Program GPIO register while entering to xHib */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x1); ++ ++ pcgcctl.b.enbl_extnd_hiber = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ ++ pcgcctl.d32 = 0; ++ pcgcctl.b.extnd_hiber_pwrclmp = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ ++ pcgcctl.d32 = 0; ++ pcgcctl.b.extnd_hiber_switch = 1; ++ core_if->gr_backup->xhib_gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ core_if->gr_backup->xhib_pcgcctl = DWC_READ_REG32(core_if->pcgcctl) | pcgcctl.d32; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ ++ DWC_DEBUGPL(DBG_ANY, "Finished entering to extended hibernation\n"); ++ ++ return 1; ++ } ++ } ++ } else { ++ if (core_if->op_state == A_PERIPHERAL) { ++ DWC_DEBUGPL(DBG_ANY, "a_peripheral->a_host\n"); ++ /* Clear the a_peripheral flag, back to a_host. */ ++ DWC_SPINUNLOCK(core_if->lock); ++ cil_pcd_stop(core_if); ++ cil_hcd_start(core_if); ++ DWC_SPINLOCK(core_if->lock); ++ core_if->op_state = A_HOST; ++ } ++ } ++ ++ /* Change to L2(suspend) state */ ++ core_if->lx_state = DWC_OTG_L2; ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.usbsuspend = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++static int32_t dwc_otg_handle_xhib_exit_intr(dwc_otg_core_if_t * core_if) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ gahbcfg_data_t gahbcfg = {.d32 = 0 }; ++ ++ dwc_udelay(10); ++ ++ /* Program GPIO register while entering to xHib */ ++ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x0); ++ ++ pcgcctl.d32 = core_if->gr_backup->xhib_pcgcctl; ++ pcgcctl.b.extnd_hiber_pwrclmp = 0; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ dwc_udelay(10); ++ ++ gpwrdn.d32 = core_if->gr_backup->xhib_gpwrdn; ++ gpwrdn.b.restore = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ restore_lpm_i2c_regs(core_if); ++ ++ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14); ++ pcgcctl.b.max_xcvrselect = 1; ++ pcgcctl.b.ess_reg_restored = 0; ++ pcgcctl.b.extnd_hiber_switch = 0; ++ pcgcctl.b.extnd_hiber_pwrclmp = 0; ++ pcgcctl.b.enbl_extnd_hiber = 1; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ ++ gahbcfg.d32 = core_if->gr_backup->gahbcfg_local; ++ gahbcfg.b.glblintrmsk = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32); ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0x1 << 16); ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, ++ core_if->gr_backup->gusbcfg_local); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, ++ core_if->dr_backup->dcfg); ++ ++ pcgcctl.d32 = 0; ++ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14); ++ pcgcctl.b.max_xcvrselect = 1; ++ pcgcctl.d32 |= 0x608; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ dwc_udelay(10); ++ ++ pcgcctl.d32 = 0; ++ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14); ++ pcgcctl.b.max_xcvrselect = 1; ++ pcgcctl.b.ess_reg_restored = 1; ++ pcgcctl.b.enbl_extnd_hiber = 1; ++ pcgcctl.b.rstpdwnmodule = 1; ++ pcgcctl.b.restoremode = 1; ++ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); ++ ++ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__); ++ ++ return 1; ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** ++ * This function hadles LPM transaction received interrupt. ++ */ ++static int32_t dwc_otg_handle_lpm_intr(dwc_otg_core_if_t * core_if) ++{ ++ glpmcfg_data_t lpmcfg; ++ gintsts_data_t gintsts; ++ ++ if (!core_if->core_params->lpm_enable) { ++ DWC_PRINTF("Unexpected LPM interrupt\n"); ++ } ++ ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ DWC_PRINTF("LPM config register = 0x%08x\n", lpmcfg.d32); ++ ++ if (dwc_otg_is_host_mode(core_if)) { ++ cil_hcd_sleep(core_if); ++ } else { ++ lpmcfg.b.hird_thres |= (1 << 4); ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, ++ lpmcfg.d32); ++ } ++ ++ /* Examine prt_sleep_sts after TL1TokenTetry period max (10 us) */ ++ dwc_udelay(10); ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ if (lpmcfg.b.prt_sleep_sts) { ++ /* Save the current state */ ++ core_if->lx_state = DWC_OTG_L1; ++ } ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.lpmtranrcvd = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ return 1; ++} ++#endif /* CONFIG_USB_DWC_OTG_LPM */ ++ ++/** ++ * This function returns the Core Interrupt register. ++ */ ++static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t * core_if, gintmsk_data_t *reenable_gintmsk, dwc_otg_hcd_t *hcd) ++{ ++ gahbcfg_data_t gahbcfg = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ gintmsk_data_t gintmsk; ++ gintmsk_data_t gintmsk_common = {.d32 = 0 }; ++ gintmsk_common.b.wkupintr = 1; ++ gintmsk_common.b.sessreqintr = 1; ++ gintmsk_common.b.conidstschng = 1; ++ gintmsk_common.b.otgintr = 1; ++ gintmsk_common.b.modemismatch = 1; ++ gintmsk_common.b.disconnect = 1; ++ gintmsk_common.b.usbsuspend = 1; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ gintmsk_common.b.lpmtranrcvd = 1; ++#endif ++ gintmsk_common.b.restoredone = 1; ++ if(dwc_otg_is_device_mode(core_if)) ++ { ++ /** @todo: The port interrupt occurs while in device ++ * mode. Added code to CIL to clear the interrupt for now! ++ */ ++ gintmsk_common.b.portintr = 1; ++ } ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); ++ if(fiq_enable) { ++ local_fiq_disable(); ++ /* Pull in the interrupts that the FIQ has masked */ ++ gintmsk.d32 |= ~(hcd->fiq_state->gintmsk_saved.d32); ++ gintmsk.d32 |= gintmsk_common.d32; ++ /* for the upstairs function to reenable - have to read it here in case FIQ triggers again */ ++ reenable_gintmsk->d32 = gintmsk.d32; ++ local_fiq_enable(); ++ } ++ ++ gahbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg); ++ ++#ifdef DEBUG ++ /* if any common interrupts set */ ++ if (gintsts.d32 & gintmsk_common.d32) { ++ DWC_DEBUGPL(DBG_ANY, "common_intr: gintsts=%08x gintmsk=%08x\n", ++ gintsts.d32, gintmsk.d32); ++ } ++#endif ++ if (!fiq_enable){ ++ if (gahbcfg.b.glblintrmsk) ++ return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32); ++ else ++ return 0; ++ } else { ++ /* Our IRQ kicker is no longer the USB hardware, it's the MPHI interface. ++ * Can't trust the global interrupt mask bit in this case. ++ */ ++ return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32); ++ } ++ ++} ++ ++/* MACRO for clearing interupt bits in GPWRDN register */ ++#define CLEAR_GPWRDN_INTR(__core_if,__intr) \ ++do { \ ++ gpwrdn_data_t gpwrdn = {.d32=0}; \ ++ gpwrdn.b.__intr = 1; \ ++ DWC_MODIFY_REG32(&__core_if->core_global_regs->gpwrdn, \ ++ 0, gpwrdn.d32); \ ++} while (0) ++ ++/** ++ * Common interrupt handler. ++ * ++ * The common interrupts are those that occur in both Host and Device mode. ++ * This handler handles the following interrupts: ++ * - Mode Mismatch Interrupt ++ * - Disconnect Interrupt ++ * - OTG Interrupt ++ * - Connector ID Status Change Interrupt ++ * - Session Request Interrupt. ++ * - Resume / Remote Wakeup Detected Interrupt. ++ * - LPM Transaction Received Interrupt ++ * - ADP Transaction Received Interrupt ++ * ++ */ ++int32_t dwc_otg_handle_common_intr(void *dev) ++{ ++ int retval = 0; ++ gintsts_data_t gintsts; ++ gintmsk_data_t gintmsk_reenable = { .d32 = 0 }; ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ dwc_otg_device_t *otg_dev = dev; ++ dwc_otg_core_if_t *core_if = otg_dev->core_if; ++ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ if (dwc_otg_is_device_mode(core_if)) ++ core_if->frame_num = dwc_otg_get_frame_number(core_if); ++ ++ if (core_if->lock) ++ DWC_SPINLOCK(core_if->lock); ++ ++ if (core_if->power_down == 3 && core_if->xhib == 1) { ++ DWC_DEBUGPL(DBG_ANY, "Exiting from xHIB state\n"); ++ retval |= dwc_otg_handle_xhib_exit_intr(core_if); ++ core_if->xhib = 2; ++ if (core_if->lock) ++ DWC_SPINUNLOCK(core_if->lock); ++ ++ return retval; ++ } ++ ++ if (core_if->hibernation_suspend <= 0) { ++ /* read_common will have to poke the FIQ's saved mask. We must then clear this mask at the end ++ * of this handler - god only knows why it's done like this ++ */ ++ gintsts.d32 = dwc_otg_read_common_intr(core_if, &gintmsk_reenable, otg_dev->hcd); ++ ++ if (gintsts.b.modemismatch) { ++ retval |= dwc_otg_handle_mode_mismatch_intr(core_if); ++ } ++ if (gintsts.b.otgintr) { ++ retval |= dwc_otg_handle_otg_intr(core_if); ++ } ++ if (gintsts.b.conidstschng) { ++ retval |= ++ dwc_otg_handle_conn_id_status_change_intr(core_if); ++ } ++ if (gintsts.b.disconnect) { ++ retval |= dwc_otg_handle_disconnect_intr(core_if); ++ } ++ if (gintsts.b.sessreqintr) { ++ retval |= dwc_otg_handle_session_req_intr(core_if); ++ } ++ if (gintsts.b.wkupintr) { ++ retval |= dwc_otg_handle_wakeup_detected_intr(core_if); ++ } ++ if (gintsts.b.usbsuspend) { ++ retval |= dwc_otg_handle_usb_suspend_intr(core_if); ++ } ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (gintsts.b.lpmtranrcvd) { ++ retval |= dwc_otg_handle_lpm_intr(core_if); ++ } ++#endif ++ if (gintsts.b.restoredone) { ++ gintsts.d32 = 0; ++ if (core_if->power_down == 2) ++ core_if->hibernation_suspend = -1; ++ else if (core_if->power_down == 3 && core_if->xhib == 2) { ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs-> ++ gintsts, 0xFFFFFFFF); ++ ++ DWC_DEBUGPL(DBG_ANY, ++ "RESTORE DONE generated\n"); ++ ++ gpwrdn.b.restore = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ pcgcctl.b.rstpdwnmodule = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ ++ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, core_if->gr_backup->gusbcfg_local); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, core_if->dr_backup->dcfg); ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, core_if->dr_backup->dctl); ++ dwc_udelay(50); ++ ++ dctl.b.pwronprgdone = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ dwc_udelay(10); ++ ++ dwc_otg_restore_global_regs(core_if); ++ dwc_otg_restore_dev_regs(core_if, 0); ++ ++ dctl.d32 = 0; ++ dctl.b.pwronprgdone = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0); ++ dwc_udelay(10); ++ ++ pcgcctl.d32 = 0; ++ pcgcctl.b.enbl_extnd_hiber = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ ++ /* The core will be in ON STATE */ ++ core_if->lx_state = DWC_OTG_L0; ++ core_if->xhib = 0; ++ ++ DWC_SPINUNLOCK(core_if->lock); ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); ++ } ++ DWC_SPINLOCK(core_if->lock); ++ ++ } ++ ++ gintsts.b.restoredone = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32); ++ DWC_PRINTF(" --Restore done interrupt received-- \n"); ++ retval |= 1; ++ } ++ if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) { ++ /* The port interrupt occurs while in device mode with HPRT0 ++ * Port Enable/Disable. ++ */ ++ gintsts.d32 = 0; ++ gintsts.b.portintr = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32); ++ retval |= 1; ++ gintmsk_reenable.b.portintr = 1; ++ ++ } ++ /* Did we actually handle anything? if so, unmask the interrupt */ ++// fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "CILOUT %1d", retval); ++// fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "%08x", gintsts.d32); ++// fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "%08x", gintmsk_reenable.d32); ++ if (retval && fiq_enable) { ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk_reenable.d32); ++ } ++ ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "gpwrdn=%08x\n", gpwrdn.d32); ++ ++ if (gpwrdn.b.disconn_det && gpwrdn.b.disconn_det_msk) { ++ CLEAR_GPWRDN_INTR(core_if, disconn_det); ++ if (gpwrdn.b.linestate == 0) { ++ dwc_otg_handle_pwrdn_disconnect_intr(core_if); ++ } else { ++ DWC_PRINTF("Disconnect detected while linestate is not 0\n"); ++ } ++ ++ retval |= 1; ++ } ++ if (gpwrdn.b.lnstschng && gpwrdn.b.lnstchng_msk) { ++ CLEAR_GPWRDN_INTR(core_if, lnstschng); ++ /* remote wakeup from hibernation */ ++ if (gpwrdn.b.linestate == 2 || gpwrdn.b.linestate == 1) { ++ dwc_otg_handle_pwrdn_wakeup_detected_intr(core_if); ++ } else { ++ DWC_PRINTF("gpwrdn.linestate = %d\n", gpwrdn.b.linestate); ++ } ++ retval |= 1; ++ } ++ if (gpwrdn.b.rst_det && gpwrdn.b.rst_det_msk) { ++ CLEAR_GPWRDN_INTR(core_if, rst_det); ++ if (gpwrdn.b.linestate == 0) { ++ DWC_PRINTF("Reset detected\n"); ++ retval |= dwc_otg_device_hibernation_restore(core_if, 0, 1); ++ } ++ } ++ if (gpwrdn.b.srp_det && gpwrdn.b.srp_det_msk) { ++ CLEAR_GPWRDN_INTR(core_if, srp_det); ++ dwc_otg_handle_pwrdn_srp_intr(core_if); ++ retval |= 1; ++ } ++ } ++ /* Handle ADP interrupt here */ ++ if (gpwrdn.b.adp_int) { ++ DWC_PRINTF("ADP interrupt\n"); ++ CLEAR_GPWRDN_INTR(core_if, adp_int); ++ dwc_otg_adp_handle_intr(core_if); ++ retval |= 1; ++ } ++ if (gpwrdn.b.sts_chngint && gpwrdn.b.sts_chngint_msk) { ++ DWC_PRINTF("STS CHNG interrupt asserted\n"); ++ CLEAR_GPWRDN_INTR(core_if, sts_chngint); ++ dwc_otg_handle_pwrdn_stschng_intr(otg_dev); ++ ++ retval |= 1; ++ } ++ if (core_if->lock) ++ DWC_SPINUNLOCK(core_if->lock); ++ return retval; ++} +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_core_if.h +@@ -0,0 +1,705 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_core_if.h $ ++ * $Revision: #13 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#if !defined(__DWC_CORE_IF_H__) ++#define __DWC_CORE_IF_H__ ++ ++#include "dwc_os.h" ++ ++/** @file ++ * This file defines DWC_OTG Core API ++ */ ++ ++struct dwc_otg_core_if; ++typedef struct dwc_otg_core_if dwc_otg_core_if_t; ++ ++/** Maximum number of Periodic FIFOs */ ++#define MAX_PERIO_FIFOS 15 ++/** Maximum number of Periodic FIFOs */ ++#define MAX_TX_FIFOS 15 ++ ++/** Maximum number of Endpoints/HostChannels */ ++#define MAX_EPS_CHANNELS 16 ++ ++extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * _reg_base_addr); ++extern void dwc_otg_core_init(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_cil_remove(dwc_otg_core_if_t * _core_if); ++ ++extern void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * _core_if); ++ ++extern uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if); ++extern uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if); ++ ++extern uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if); ++ ++/** This function should be called on every hardware interrupt. */ ++extern int32_t dwc_otg_handle_common_intr(void *otg_dev); ++ ++/** @name OTG Core Parameters */ ++/** @{ */ ++ ++/** ++ * Specifies the OTG capabilities. The driver will automatically ++ * detect the value for this parameter if none is specified. ++ * 0 - HNP and SRP capable (default) ++ * 1 - SRP Only capable ++ * 2 - No HNP/SRP capable ++ */ ++extern int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if); ++#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0 ++#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1 ++#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2 ++#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE ++ ++extern int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if); ++#define dwc_param_opt_default 1 ++ ++/** ++ * Specifies whether to use slave or DMA mode for accessing the data ++ * FIFOs. The driver will automatically detect the value for this ++ * parameter if none is specified. ++ * 0 - Slave ++ * 1 - DMA (default, if available) ++ */ ++extern int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_dma_enable_default 1 ++ ++/** ++ * When DMA mode is enabled specifies whether to use ++ * address DMA or DMA Descritor mode for accessing the data ++ * FIFOs in device mode. The driver will automatically detect ++ * the value for this parameter if none is specified. ++ * 0 - address DMA ++ * 1 - DMA Descriptor(default, if available) ++ */ ++extern int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if); ++//#define dwc_param_dma_desc_enable_default 1 ++#define dwc_param_dma_desc_enable_default 0 // Broadcom BCM2708 ++ ++/** The DMA Burst size (applicable only for External DMA ++ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) ++ */ ++extern int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if); ++#define dwc_param_dma_burst_size_default 32 ++ ++/** ++ * Specifies the maximum speed of operation in host and device mode. ++ * The actual speed depends on the speed of the attached device and ++ * the value of phy_type. The actual speed depends on the speed of the ++ * attached device. ++ * 0 - High Speed (default) ++ * 1 - Full Speed ++ */ ++extern int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if); ++#define dwc_param_speed_default 0 ++#define DWC_SPEED_PARAM_HIGH 0 ++#define DWC_SPEED_PARAM_FULL 1 ++ ++/** Specifies whether low power mode is supported when attached ++ * to a Full Speed or Low Speed device in host mode. ++ * 0 - Don't support low power mode (default) ++ * 1 - Support low power mode ++ */ ++extern int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t ++ * core_if); ++#define dwc_param_host_support_fs_ls_low_power_default 0 ++ ++/** Specifies the PHY clock rate in low power mode when connected to a ++ * Low Speed device in host mode. This parameter is applicable only if ++ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS ++ * then defaults to 6 MHZ otherwise 48 MHZ. ++ * ++ * 0 - 48 MHz ++ * 1 - 6 MHz ++ */ ++extern int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * ++ core_if); ++#define dwc_param_host_ls_low_power_phy_clk_default 0 ++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0 ++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1 ++ ++/** ++ * 0 - Use cC FIFO size parameters ++ * 1 - Allow dynamic FIFO sizing (default) ++ */ ++extern int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t * ++ core_if); ++#define dwc_param_enable_dynamic_fifo_default 1 ++ ++/** Total number of 4-byte words in the data FIFO memory. This ++ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic ++ * Tx FIFOs. ++ * 32 to 32768 (default 8192) ++ * Note: The total FIFO memory depth in the FPGA configuration is 8192. ++ */ ++extern int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if); ++//#define dwc_param_data_fifo_size_default 8192 ++#define dwc_param_data_fifo_size_default 0xFF0 // Broadcom BCM2708 ++ ++/** Number of 4-byte words in the Rx FIFO in device mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1064) ++ */ ++extern int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if); ++#define dwc_param_dev_rx_fifo_size_default 1064 ++ ++/** Number of 4-byte words in the non-periodic Tx FIFO in device mode ++ * when dynamic FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++extern int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if); ++#define dwc_param_dev_nperio_tx_fifo_size_default 1024 ++ ++/** Number of 4-byte words in each of the periodic Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++extern int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val, int fifo_num); ++extern int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if, int fifo_num); ++#define dwc_param_dev_perio_tx_fifo_size_default 256 ++ ++/** Number of 4-byte words in the Rx FIFO in host mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++extern int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if); ++//#define dwc_param_host_rx_fifo_size_default 1024 ++#define dwc_param_host_rx_fifo_size_default 774 // Broadcom BCM2708 ++ ++/** Number of 4-byte words in the non-periodic Tx FIFO in host mode ++ * when Dynamic FIFO sizing is enabled in the core. ++ * 16 to 32768 (default 1024) ++ */ ++extern int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if); ++//#define dwc_param_host_nperio_tx_fifo_size_default 1024 ++#define dwc_param_host_nperio_tx_fifo_size_default 0x100 // Broadcom BCM2708 ++ ++/** Number of 4-byte words in the host periodic Tx FIFO when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++extern int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if, int32_t val); ++extern int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * ++ core_if); ++//#define dwc_param_host_perio_tx_fifo_size_default 1024 ++#define dwc_param_host_perio_tx_fifo_size_default 0x200 // Broadcom BCM2708 ++ ++/** The maximum transfer size supported in bytes. ++ * 2047 to 65,535 (default 65,535) ++ */ ++extern int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if); ++#define dwc_param_max_transfer_size_default 65535 ++ ++/** The maximum number of packets in a transfer. ++ * 15 to 511 (default 511) ++ */ ++extern int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if); ++#define dwc_param_max_packet_count_default 511 ++ ++/** The number of host channel registers to use. ++ * 1 to 16 (default 12) ++ * Note: The FPGA configuration supports a maximum of 12 host channels. ++ */ ++extern int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if); ++//#define dwc_param_host_channels_default 12 ++#define dwc_param_host_channels_default 8 // Broadcom BCM2708 ++ ++/** The number of endpoints in addition to EP0 available for device ++ * mode operations. ++ * 1 to 15 (default 6 IN and OUT) ++ * Note: The FPGA configuration supports a maximum of 6 IN and OUT ++ * endpoints in addition to EP0. ++ */ ++extern int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if); ++#define dwc_param_dev_endpoints_default 6 ++ ++/** ++ * Specifies the type of PHY interface to use. By default, the driver ++ * will automatically detect the phy_type. ++ * ++ * 0 - Full Speed PHY ++ * 1 - UTMI+ (default) ++ * 2 - ULPI ++ */ ++extern int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if); ++#define DWC_PHY_TYPE_PARAM_FS 0 ++#define DWC_PHY_TYPE_PARAM_UTMI 1 ++#define DWC_PHY_TYPE_PARAM_ULPI 2 ++#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI ++ ++/** ++ * Specifies the UTMI+ Data Width. This parameter is ++ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI ++ * PHY_TYPE, this parameter indicates the data width between ++ * the MAC and the ULPI Wrapper.) Also, this parameter is ++ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set ++ * to "8 and 16 bits", meaning that the core has been ++ * configured to work at either data path width. ++ * ++ * 8 or 16 bits (default 16) ++ */ ++extern int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if); ++//#define dwc_param_phy_utmi_width_default 16 ++#define dwc_param_phy_utmi_width_default 8 // Broadcom BCM2708 ++ ++/** ++ * Specifies whether the ULPI operates at double or single ++ * data rate. This parameter is only applicable if PHY_TYPE is ++ * ULPI. ++ * ++ * 0 - single data rate ULPI interface with 8 bit wide data ++ * bus (default) ++ * 1 - double data rate ULPI interface with 4 bit wide data ++ * bus ++ */ ++extern int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if); ++#define dwc_param_phy_ulpi_ddr_default 0 ++ ++/** ++ * Specifies whether to use the internal or external supply to ++ * drive the vbus with a ULPI phy. ++ */ ++extern int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if); ++#define DWC_PHY_ULPI_INTERNAL_VBUS 0 ++#define DWC_PHY_ULPI_EXTERNAL_VBUS 1 ++#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS ++ ++/** ++ * Specifies whether to use the I2Cinterface for full speed PHY. This ++ * parameter is only applicable if PHY_TYPE is FS. ++ * 0 - No (default) ++ * 1 - Yes ++ */ ++extern int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_i2c_enable_default 0 ++ ++extern int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if); ++#define dwc_param_ulpi_fs_ls_default 0 ++ ++extern int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if); ++#define dwc_param_ts_dline_default 0 ++ ++/** ++ * Specifies whether dedicated transmit FIFOs are ++ * enabled for non periodic IN endpoints in device mode ++ * 0 - No ++ * 1 - Yes ++ */ ++extern int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t * ++ core_if); ++#define dwc_param_en_multiple_tx_fifo_default 1 ++ ++/** Number of 4-byte words in each of the Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++extern int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int fifo_num, int32_t val); ++extern int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, ++ int fifo_num); ++#define dwc_param_dev_tx_fifo_size_default 768 ++ ++/** Thresholding enable flag- ++ * bit 0 - enable non-ISO Tx thresholding ++ * bit 1 - enable ISO Tx thresholding ++ * bit 2 - enable Rx thresholding ++ */ ++extern int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_thr_ctl(dwc_otg_core_if_t * core_if, int fifo_num); ++#define dwc_param_thr_ctl_default 0 ++ ++/** Thresholding length for Tx ++ * FIFOs in 32 bit DWORDs ++ */ ++extern int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_tx_thr_length(dwc_otg_core_if_t * core_if); ++#define dwc_param_tx_thr_length_default 64 ++ ++/** Thresholding length for Rx ++ * FIFOs in 32 bit DWORDs ++ */ ++extern int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_rx_thr_length(dwc_otg_core_if_t * core_if); ++#define dwc_param_rx_thr_length_default 64 ++ ++/** ++ * Specifies whether LPM (Link Power Management) support is enabled ++ */ ++extern int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_lpm_enable_default 1 ++ ++/** ++ * Specifies whether PTI enhancement is enabled ++ */ ++extern int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_pti_enable_default 0 ++ ++/** ++ * Specifies whether MPI enhancement is enabled ++ */ ++extern int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_mpi_enable_default 0 ++ ++/** ++ * Specifies whether ADP capability is enabled ++ */ ++extern int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if); ++#define dwc_param_adp_enable_default 0 ++ ++/** ++ * Specifies whether IC_USB capability is enabled ++ */ ++ ++extern int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if); ++#define dwc_param_ic_usb_cap_default 0 ++ ++extern int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if); ++#define dwc_param_ahb_thr_ratio_default 0 ++ ++extern int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if); ++#define dwc_param_power_down_default 0 ++ ++extern int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if); ++#define dwc_param_reload_ctl_default 0 ++ ++extern int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if); ++#define dwc_param_dev_out_nak_default 0 ++ ++extern int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if); ++#define dwc_param_cont_on_bna_default 0 ++ ++extern int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if, ++ int32_t val); ++extern int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if); ++#define dwc_param_ahb_single_default 0 ++ ++extern int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val); ++extern int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if); ++#define dwc_param_otg_ver_default 0 ++ ++/** @} */ ++ ++/** @name Access to registers and bit-fields */ ++ ++/** ++ * Dump core registers and SPRAM ++ */ ++extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_dump_spram(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t * _core_if); ++extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t * _core_if); ++ ++/** ++ * Get host negotiation status. ++ */ ++extern uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get srp status ++ */ ++extern uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Set hnpreq bit in the GOTGCTL register. ++ */ ++extern void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get Content of SNPSID register. ++ */ ++extern uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get current mode. ++ * Returns 0 if in device mode, and 1 if in host mode. ++ */ ++extern uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of hnpcapable field in the GUSBCFG register ++ */ ++extern uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of hnpcapable field in the GUSBCFG register ++ */ ++extern void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of srpcapable field in the GUSBCFG register ++ */ ++extern uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of srpcapable field in the GUSBCFG register ++ */ ++extern void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of devspeed field in the DCFG register ++ */ ++extern uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of devspeed field in the DCFG register ++ */ ++extern void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get the value of busconnected field from the HPRT0 register ++ */ ++extern uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Gets the device enumeration Speed. ++ */ ++extern uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of prtpwr field from the HPRT0 register ++ */ ++extern uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of flag indicating core state - hibernated or not ++ */ ++extern uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Set value of prtpwr field from the HPRT0 register ++ */ ++extern void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of prtsusp field from the HPRT0 regsiter ++ */ ++extern uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of prtpwr field from the HPRT0 register ++ */ ++extern void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of ModeChTimEn field from the HCFG regsiter ++ */ ++extern uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of ModeChTimEn field from the HCFG regsiter ++ */ ++extern void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of Fram Interval field from the HFIR regsiter ++ */ ++extern uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of Frame Interval field from the HFIR regsiter ++ */ ++extern void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Set value of prtres field from the HPRT0 register ++ *FIXME Remove? ++ */ ++extern void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of rmtwkupsig bit in DCTL register ++ */ ++extern uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of prt_sleep_sts field from the GLPMCFG register ++ */ ++extern uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of rem_wkup_en field from the GLPMCFG register ++ */ ++extern uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Get value of appl_resp field from the GLPMCFG register ++ */ ++extern uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of appl_resp field from the GLPMCFG register ++ */ ++extern void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of hsic_connect field from the GLPMCFG register ++ */ ++extern uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of hsic_connect field from the GLPMCFG register ++ */ ++extern void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * Get value of inv_sel_hsic field from the GLPMCFG register. ++ */ ++extern uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if); ++/** ++ * Set value of inv_sel_hsic field from the GLPMFG register. ++ */ ++extern void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/* ++ * Some functions for accessing registers ++ */ ++ ++/** ++ * GOTGCTL register ++ */ ++extern uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GUSBCFG register ++ */ ++extern uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GRXFSIZ register ++ */ ++extern uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GNPTXFSIZ register ++ */ ++extern uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++extern uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GGPIO register ++ */ ++extern uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GUID register ++ */ ++extern uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * HPRT0 register ++ */ ++extern uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if); ++extern void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val); ++ ++/** ++ * GHPTXFSIZE ++ */ ++extern uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if); ++ ++/** @} */ ++ ++#endif /* __DWC_CORE_IF_H__ */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_dbg.h +@@ -0,0 +1,117 @@ ++/* ========================================================================== ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#ifndef __DWC_OTG_DBG_H__ ++#define __DWC_OTG_DBG_H__ ++ ++/** @file ++ * This file defines debug levels. ++ * Debugging support vanishes in non-debug builds. ++ */ ++ ++/** ++ * The Debug Level bit-mask variable. ++ */ ++extern uint32_t g_dbg_lvl; ++/** ++ * Set the Debug Level variable. ++ */ ++static inline uint32_t SET_DEBUG_LEVEL(const uint32_t new) ++{ ++ uint32_t old = g_dbg_lvl; ++ g_dbg_lvl = new; ++ return old; ++} ++ ++#define DBG_USER (0x1) ++/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */ ++#define DBG_CIL (0x2) ++/** When debug level has the DBG_CILV bit set, display CIL Verbose debug ++ * messages */ ++#define DBG_CILV (0x20) ++/** When debug level has the DBG_PCD bit set, display PCD (Device) debug ++ * messages */ ++#define DBG_PCD (0x4) ++/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug ++ * messages */ ++#define DBG_PCDV (0x40) ++/** When debug level has the DBG_HCD bit set, display Host debug messages */ ++#define DBG_HCD (0x8) ++/** When debug level has the DBG_HCDV bit set, display Verbose Host debug ++ * messages */ ++#define DBG_HCDV (0x80) ++/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host ++ * mode. */ ++#define DBG_HCD_URB (0x800) ++/** When debug level has the DBG_HCDI bit set, display host interrupt ++ * messages. */ ++#define DBG_HCDI (0x1000) ++ ++/** When debug level has any bit set, display debug messages */ ++#define DBG_ANY (0xFF) ++ ++/** All debug messages off */ ++#define DBG_OFF 0 ++ ++/** Prefix string for DWC_DEBUG print macros. */ ++#define USB_DWC "DWC_otg: " ++ ++/** ++ * Print a debug message when the Global debug level variable contains ++ * the bit defined in lvl. ++ * ++ * @param[in] lvl - Debug level, use one of the DBG_ constants above. ++ * @param[in] x - like printf ++ * ++ * Example:

++ * ++ * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr); ++ * ++ *
++ * results in:
++ * ++ * usb-DWC_otg: dwc_otg_cil_init(ca867000) ++ * ++ */ ++#ifdef DEBUG ++ ++# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)__DWC_DEBUG(USB_DWC x ); }while(0) ++# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x ) ++ ++# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl) ++ ++#else ++ ++# define DWC_DEBUGPL(lvl, x...) do{}while(0) ++# define DWC_DEBUGP(x...) ++ ++# define CHK_DEBUG_LEVEL(level) (0) ++ ++#endif /*DEBUG*/ ++#endif +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c +@@ -0,0 +1,1757 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.c $ ++ * $Revision: #92 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * The dwc_otg_driver module provides the initialization and cleanup entry ++ * points for the DWC_otg driver. This module will be dynamically installed ++ * after Linux is booted using the insmod command. When the module is ++ * installed, the dwc_otg_driver_init function is called. When the module is ++ * removed (using rmmod), the dwc_otg_driver_cleanup function is called. ++ * ++ * This module also defines a data structure for the dwc_otg_driver, which is ++ * used in conjunction with the standard ARM lm_device structure. These ++ * structures allow the OTG driver to comply with the standard Linux driver ++ * model in which devices and drivers are registered with a bus driver. This ++ * has the benefit that Linux can expose attributes of the driver and device ++ * in its special sysfs file system. Users can then read or write files in ++ * this file system to perform diagnostics on the driver components or the ++ * device. ++ */ ++ ++#include "dwc_otg_os_dep.h" ++#include "dwc_os.h" ++#include "dwc_otg_dbg.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_attr.h" ++#include "dwc_otg_core_if.h" ++#include "dwc_otg_pcd_if.h" ++#include "dwc_otg_hcd_if.h" ++#include "dwc_otg_fiq_fsm.h" ++ ++#define DWC_DRIVER_VERSION "3.00a 10-AUG-2012" ++#define DWC_DRIVER_DESC "HS OTG USB Controller driver" ++ ++bool microframe_schedule=true; ++ ++static const char dwc_driver_name[] = "dwc_otg"; ++ ++ ++extern int pcd_init( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ); ++extern int hcd_init( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *dev ++#endif ++ ); ++ ++extern int pcd_remove( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *_dev ++#endif ++ ); ++ ++extern void hcd_remove( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *_dev ++#endif ++ ); ++ ++extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host); ++ ++/*-------------------------------------------------------------------------*/ ++/* Encapsulate the module parameter settings */ ++ ++struct dwc_otg_driver_module_params { ++ int32_t opt; ++ int32_t otg_cap; ++ int32_t dma_enable; ++ int32_t dma_desc_enable; ++ int32_t dma_burst_size; ++ int32_t speed; ++ int32_t host_support_fs_ls_low_power; ++ int32_t host_ls_low_power_phy_clk; ++ int32_t enable_dynamic_fifo; ++ int32_t data_fifo_size; ++ int32_t dev_rx_fifo_size; ++ int32_t dev_nperio_tx_fifo_size; ++ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS]; ++ int32_t host_rx_fifo_size; ++ int32_t host_nperio_tx_fifo_size; ++ int32_t host_perio_tx_fifo_size; ++ int32_t max_transfer_size; ++ int32_t max_packet_count; ++ int32_t host_channels; ++ int32_t dev_endpoints; ++ int32_t phy_type; ++ int32_t phy_utmi_width; ++ int32_t phy_ulpi_ddr; ++ int32_t phy_ulpi_ext_vbus; ++ int32_t i2c_enable; ++ int32_t ulpi_fs_ls; ++ int32_t ts_dline; ++ int32_t en_multiple_tx_fifo; ++ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS]; ++ uint32_t thr_ctl; ++ uint32_t tx_thr_length; ++ uint32_t rx_thr_length; ++ int32_t pti_enable; ++ int32_t mpi_enable; ++ int32_t lpm_enable; ++ int32_t ic_usb_cap; ++ int32_t ahb_thr_ratio; ++ int32_t power_down; ++ int32_t reload_ctl; ++ int32_t dev_out_nak; ++ int32_t cont_on_bna; ++ int32_t ahb_single; ++ int32_t otg_ver; ++ int32_t adp_enable; ++}; ++ ++static struct dwc_otg_driver_module_params dwc_otg_module_params = { ++ .opt = -1, ++ .otg_cap = -1, ++ .dma_enable = -1, ++ .dma_desc_enable = -1, ++ .dma_burst_size = -1, ++ .speed = -1, ++ .host_support_fs_ls_low_power = -1, ++ .host_ls_low_power_phy_clk = -1, ++ .enable_dynamic_fifo = -1, ++ .data_fifo_size = -1, ++ .dev_rx_fifo_size = -1, ++ .dev_nperio_tx_fifo_size = -1, ++ .dev_perio_tx_fifo_size = { ++ /* dev_perio_tx_fifo_size_1 */ ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1 ++ /* 15 */ ++ }, ++ .host_rx_fifo_size = -1, ++ .host_nperio_tx_fifo_size = -1, ++ .host_perio_tx_fifo_size = -1, ++ .max_transfer_size = -1, ++ .max_packet_count = -1, ++ .host_channels = -1, ++ .dev_endpoints = -1, ++ .phy_type = -1, ++ .phy_utmi_width = -1, ++ .phy_ulpi_ddr = -1, ++ .phy_ulpi_ext_vbus = -1, ++ .i2c_enable = -1, ++ .ulpi_fs_ls = -1, ++ .ts_dline = -1, ++ .en_multiple_tx_fifo = -1, ++ .dev_tx_fifo_size = { ++ /* dev_tx_fifo_size */ ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1 ++ /* 15 */ ++ }, ++ .thr_ctl = -1, ++ .tx_thr_length = -1, ++ .rx_thr_length = -1, ++ .pti_enable = -1, ++ .mpi_enable = -1, ++ .lpm_enable = 0, ++ .ic_usb_cap = -1, ++ .ahb_thr_ratio = -1, ++ .power_down = -1, ++ .reload_ctl = -1, ++ .dev_out_nak = -1, ++ .cont_on_bna = -1, ++ .ahb_single = -1, ++ .otg_ver = -1, ++ .adp_enable = -1, ++}; ++ ++//Global variable to switch the fiq fix on or off ++bool fiq_enable = 1; ++// Global variable to enable the split transaction fix ++bool fiq_fsm_enable = true; ++//Bulk split-transaction NAK holdoff in microframes ++uint16_t nak_holdoff = 8; ++ ++unsigned short fiq_fsm_mask = 0x0F; ++ ++/** ++ * This function shows the Driver Version. ++ */ ++static ssize_t version_show(struct device_driver *dev, char *buf) ++{ ++ return snprintf(buf, sizeof(DWC_DRIVER_VERSION) + 2, "%s\n", ++ DWC_DRIVER_VERSION); ++} ++ ++static DRIVER_ATTR(version, S_IRUGO, version_show, NULL); ++ ++/** ++ * Global Debug Level Mask. ++ */ ++uint32_t g_dbg_lvl = 0; /* OFF */ ++ ++/** ++ * This function shows the driver Debug Level. ++ */ ++static ssize_t dbg_level_show(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%0x\n", g_dbg_lvl); ++} ++ ++/** ++ * This function stores the driver Debug Level. ++ */ ++static ssize_t dbg_level_store(struct device_driver *drv, const char *buf, ++ size_t count) ++{ ++ g_dbg_lvl = simple_strtoul(buf, NULL, 16); ++ return count; ++} ++ ++static DRIVER_ATTR(debuglevel, S_IRUGO | S_IWUSR, dbg_level_show, ++ dbg_level_store); ++ ++/** ++ * This function is called during module intialization ++ * to pass module parameters to the DWC_OTG CORE. ++ */ ++static int set_parameters(dwc_otg_core_if_t * core_if) ++{ ++ int retval = 0; ++ int i; ++ ++ if (dwc_otg_module_params.otg_cap != -1) { ++ retval += ++ dwc_otg_set_param_otg_cap(core_if, ++ dwc_otg_module_params.otg_cap); ++ } ++ if (dwc_otg_module_params.dma_enable != -1) { ++ retval += ++ dwc_otg_set_param_dma_enable(core_if, ++ dwc_otg_module_params. ++ dma_enable); ++ } ++ if (dwc_otg_module_params.dma_desc_enable != -1) { ++ retval += ++ dwc_otg_set_param_dma_desc_enable(core_if, ++ dwc_otg_module_params. ++ dma_desc_enable); ++ } ++ if (dwc_otg_module_params.opt != -1) { ++ retval += ++ dwc_otg_set_param_opt(core_if, dwc_otg_module_params.opt); ++ } ++ if (dwc_otg_module_params.dma_burst_size != -1) { ++ retval += ++ dwc_otg_set_param_dma_burst_size(core_if, ++ dwc_otg_module_params. ++ dma_burst_size); ++ } ++ if (dwc_otg_module_params.host_support_fs_ls_low_power != -1) { ++ retval += ++ dwc_otg_set_param_host_support_fs_ls_low_power(core_if, ++ dwc_otg_module_params. ++ host_support_fs_ls_low_power); ++ } ++ if (dwc_otg_module_params.enable_dynamic_fifo != -1) { ++ retval += ++ dwc_otg_set_param_enable_dynamic_fifo(core_if, ++ dwc_otg_module_params. ++ enable_dynamic_fifo); ++ } ++ if (dwc_otg_module_params.data_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_data_fifo_size(core_if, ++ dwc_otg_module_params. ++ data_fifo_size); ++ } ++ if (dwc_otg_module_params.dev_rx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_dev_rx_fifo_size(core_if, ++ dwc_otg_module_params. ++ dev_rx_fifo_size); ++ } ++ if (dwc_otg_module_params.dev_nperio_tx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ dev_nperio_tx_fifo_size); ++ } ++ if (dwc_otg_module_params.host_rx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_host_rx_fifo_size(core_if, ++ dwc_otg_module_params.host_rx_fifo_size); ++ } ++ if (dwc_otg_module_params.host_nperio_tx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_host_nperio_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ host_nperio_tx_fifo_size); ++ } ++ if (dwc_otg_module_params.host_perio_tx_fifo_size != -1) { ++ retval += ++ dwc_otg_set_param_host_perio_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ host_perio_tx_fifo_size); ++ } ++ if (dwc_otg_module_params.max_transfer_size != -1) { ++ retval += ++ dwc_otg_set_param_max_transfer_size(core_if, ++ dwc_otg_module_params. ++ max_transfer_size); ++ } ++ if (dwc_otg_module_params.max_packet_count != -1) { ++ retval += ++ dwc_otg_set_param_max_packet_count(core_if, ++ dwc_otg_module_params. ++ max_packet_count); ++ } ++ if (dwc_otg_module_params.host_channels != -1) { ++ retval += ++ dwc_otg_set_param_host_channels(core_if, ++ dwc_otg_module_params. ++ host_channels); ++ } ++ if (dwc_otg_module_params.dev_endpoints != -1) { ++ retval += ++ dwc_otg_set_param_dev_endpoints(core_if, ++ dwc_otg_module_params. ++ dev_endpoints); ++ } ++ if (dwc_otg_module_params.phy_type != -1) { ++ retval += ++ dwc_otg_set_param_phy_type(core_if, ++ dwc_otg_module_params.phy_type); ++ } ++ if (dwc_otg_module_params.speed != -1) { ++ retval += ++ dwc_otg_set_param_speed(core_if, ++ dwc_otg_module_params.speed); ++ } ++ if (dwc_otg_module_params.host_ls_low_power_phy_clk != -1) { ++ retval += ++ dwc_otg_set_param_host_ls_low_power_phy_clk(core_if, ++ dwc_otg_module_params. ++ host_ls_low_power_phy_clk); ++ } ++ if (dwc_otg_module_params.phy_ulpi_ddr != -1) { ++ retval += ++ dwc_otg_set_param_phy_ulpi_ddr(core_if, ++ dwc_otg_module_params. ++ phy_ulpi_ddr); ++ } ++ if (dwc_otg_module_params.phy_ulpi_ext_vbus != -1) { ++ retval += ++ dwc_otg_set_param_phy_ulpi_ext_vbus(core_if, ++ dwc_otg_module_params. ++ phy_ulpi_ext_vbus); ++ } ++ if (dwc_otg_module_params.phy_utmi_width != -1) { ++ retval += ++ dwc_otg_set_param_phy_utmi_width(core_if, ++ dwc_otg_module_params. ++ phy_utmi_width); ++ } ++ if (dwc_otg_module_params.ulpi_fs_ls != -1) { ++ retval += ++ dwc_otg_set_param_ulpi_fs_ls(core_if, ++ dwc_otg_module_params.ulpi_fs_ls); ++ } ++ if (dwc_otg_module_params.ts_dline != -1) { ++ retval += ++ dwc_otg_set_param_ts_dline(core_if, ++ dwc_otg_module_params.ts_dline); ++ } ++ if (dwc_otg_module_params.i2c_enable != -1) { ++ retval += ++ dwc_otg_set_param_i2c_enable(core_if, ++ dwc_otg_module_params. ++ i2c_enable); ++ } ++ if (dwc_otg_module_params.en_multiple_tx_fifo != -1) { ++ retval += ++ dwc_otg_set_param_en_multiple_tx_fifo(core_if, ++ dwc_otg_module_params. ++ en_multiple_tx_fifo); ++ } ++ for (i = 0; i < 15; i++) { ++ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) { ++ retval += ++ dwc_otg_set_param_dev_perio_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ dev_perio_tx_fifo_size ++ [i], i); ++ } ++ } ++ ++ for (i = 0; i < 15; i++) { ++ if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) { ++ retval += dwc_otg_set_param_dev_tx_fifo_size(core_if, ++ dwc_otg_module_params. ++ dev_tx_fifo_size ++ [i], i); ++ } ++ } ++ if (dwc_otg_module_params.thr_ctl != -1) { ++ retval += ++ dwc_otg_set_param_thr_ctl(core_if, ++ dwc_otg_module_params.thr_ctl); ++ } ++ if (dwc_otg_module_params.mpi_enable != -1) { ++ retval += ++ dwc_otg_set_param_mpi_enable(core_if, ++ dwc_otg_module_params. ++ mpi_enable); ++ } ++ if (dwc_otg_module_params.pti_enable != -1) { ++ retval += ++ dwc_otg_set_param_pti_enable(core_if, ++ dwc_otg_module_params. ++ pti_enable); ++ } ++ if (dwc_otg_module_params.lpm_enable != -1) { ++ retval += ++ dwc_otg_set_param_lpm_enable(core_if, ++ dwc_otg_module_params. ++ lpm_enable); ++ } ++ if (dwc_otg_module_params.ic_usb_cap != -1) { ++ retval += ++ dwc_otg_set_param_ic_usb_cap(core_if, ++ dwc_otg_module_params. ++ ic_usb_cap); ++ } ++ if (dwc_otg_module_params.tx_thr_length != -1) { ++ retval += ++ dwc_otg_set_param_tx_thr_length(core_if, ++ dwc_otg_module_params.tx_thr_length); ++ } ++ if (dwc_otg_module_params.rx_thr_length != -1) { ++ retval += ++ dwc_otg_set_param_rx_thr_length(core_if, ++ dwc_otg_module_params. ++ rx_thr_length); ++ } ++ if (dwc_otg_module_params.ahb_thr_ratio != -1) { ++ retval += ++ dwc_otg_set_param_ahb_thr_ratio(core_if, ++ dwc_otg_module_params.ahb_thr_ratio); ++ } ++ if (dwc_otg_module_params.power_down != -1) { ++ retval += ++ dwc_otg_set_param_power_down(core_if, ++ dwc_otg_module_params.power_down); ++ } ++ if (dwc_otg_module_params.reload_ctl != -1) { ++ retval += ++ dwc_otg_set_param_reload_ctl(core_if, ++ dwc_otg_module_params.reload_ctl); ++ } ++ ++ if (dwc_otg_module_params.dev_out_nak != -1) { ++ retval += ++ dwc_otg_set_param_dev_out_nak(core_if, ++ dwc_otg_module_params.dev_out_nak); ++ } ++ ++ if (dwc_otg_module_params.cont_on_bna != -1) { ++ retval += ++ dwc_otg_set_param_cont_on_bna(core_if, ++ dwc_otg_module_params.cont_on_bna); ++ } ++ ++ if (dwc_otg_module_params.ahb_single != -1) { ++ retval += ++ dwc_otg_set_param_ahb_single(core_if, ++ dwc_otg_module_params.ahb_single); ++ } ++ ++ if (dwc_otg_module_params.otg_ver != -1) { ++ retval += ++ dwc_otg_set_param_otg_ver(core_if, ++ dwc_otg_module_params.otg_ver); ++ } ++ if (dwc_otg_module_params.adp_enable != -1) { ++ retval += ++ dwc_otg_set_param_adp_enable(core_if, ++ dwc_otg_module_params. ++ adp_enable); ++ } ++ return retval; ++} ++ ++/** ++ * This function is the top level interrupt handler for the Common ++ * (Device and host modes) interrupts. ++ */ ++static irqreturn_t dwc_otg_common_irq(int irq, void *dev) ++{ ++ int32_t retval = IRQ_NONE; ++ ++ retval = dwc_otg_handle_common_intr(dev); ++ if (retval != 0) { ++ S3C2410X_CLEAR_EINTPEND(); ++ } ++ return IRQ_RETVAL(retval); ++} ++ ++/** ++ * This function is called when a lm_device is unregistered with the ++ * dwc_otg_driver. This happens, for example, when the rmmod command is ++ * executed. The device may or may not be electrically present. If it is ++ * present, the driver stops device processing. Any resources used on behalf ++ * of this device are freed. ++ * ++ * @param _dev ++ */ ++#ifdef LM_INTERFACE ++#define REM_RETVAL(n) ++static void dwc_otg_driver_remove( struct lm_device *_dev ) ++{ dwc_otg_device_t *otg_dev = lm_get_drvdata(_dev); ++#elif defined(PCI_INTERFACE) ++#define REM_RETVAL(n) ++static void dwc_otg_driver_remove( struct pci_dev *_dev ) ++{ dwc_otg_device_t *otg_dev = pci_get_drvdata(_dev); ++#elif defined(PLATFORM_INTERFACE) ++#define REM_RETVAL(n) n ++static int dwc_otg_driver_remove( struct platform_device *_dev ) ++{ dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev); ++#endif ++ ++ DWC_DEBUGPL(DBG_ANY, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev); ++ ++ if (!otg_dev) { ++ /* Memory allocation for the dwc_otg_device failed. */ ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); ++ return REM_RETVAL(-ENOMEM); ++ } ++#ifndef DWC_DEVICE_ONLY ++ if (otg_dev->hcd) { ++ hcd_remove(_dev); ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); ++ return REM_RETVAL(-EINVAL); ++ } ++#endif ++ ++#ifndef DWC_HOST_ONLY ++ if (otg_dev->pcd) { ++ pcd_remove(_dev); ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->pcd NULL!\n", __func__); ++ return REM_RETVAL(-EINVAL); ++ } ++#endif ++ /* ++ * Free the IRQ ++ */ ++ if (otg_dev->common_irq_installed) { ++#ifdef PLATFORM_INTERFACE ++ free_irq(platform_get_irq(_dev, 0), otg_dev); ++#else ++ free_irq(_dev->irq, otg_dev); ++#endif ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "%s: There is no installed irq!\n", __func__); ++ return REM_RETVAL(-ENXIO); ++ } ++ ++ if (otg_dev->core_if) { ++ dwc_otg_cil_remove(otg_dev->core_if); ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->core_if NULL!\n", __func__); ++ return REM_RETVAL(-ENXIO); ++ } ++ ++ /* ++ * Remove the device attributes ++ */ ++ dwc_otg_attr_remove(_dev); ++ ++ /* ++ * Return the memory. ++ */ ++ if (otg_dev->os_dep.base) { ++ iounmap(otg_dev->os_dep.base); ++ } ++ DWC_FREE(otg_dev); ++ ++ /* ++ * Clear the drvdata pointer. ++ */ ++#ifdef LM_INTERFACE ++ lm_set_drvdata(_dev, 0); ++#elif defined(PCI_INTERFACE) ++ release_mem_region(otg_dev->os_dep.rsrc_start, ++ otg_dev->os_dep.rsrc_len); ++ pci_set_drvdata(_dev, 0); ++#elif defined(PLATFORM_INTERFACE) ++ platform_set_drvdata(_dev, 0); ++#endif ++ return REM_RETVAL(0); ++} ++ ++/** ++ * This function is called when an lm_device is bound to a ++ * dwc_otg_driver. It creates the driver components required to ++ * control the device (CIL, HCD, and PCD) and it initializes the ++ * device. The driver components are stored in a dwc_otg_device ++ * structure. A reference to the dwc_otg_device is saved in the ++ * lm_device. This allows the driver to access the dwc_otg_device ++ * structure on subsequent calls to driver methods for this device. ++ * ++ * @param _dev Bus device ++ */ ++static int dwc_otg_driver_probe( ++#ifdef LM_INTERFACE ++ struct lm_device *_dev ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *_dev, ++ const struct pci_device_id *id ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *_dev ++#endif ++ ) ++{ ++ int retval = 0; ++ dwc_otg_device_t *dwc_otg_device; ++ int devirq; ++ ++ dev_dbg(&_dev->dev, "dwc_otg_driver_probe(%p)\n", _dev); ++#ifdef LM_INTERFACE ++ dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)_dev->resource.start); ++#elif defined(PCI_INTERFACE) ++ if (!id) { ++ DWC_ERROR("Invalid pci_device_id %p", id); ++ return -EINVAL; ++ } ++ ++ if (!_dev || (pci_enable_device(_dev) < 0)) { ++ DWC_ERROR("Invalid pci_device %p", _dev); ++ return -ENODEV; ++ } ++ dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)pci_resource_start(_dev,0)); ++ /* other stuff needed as well? */ ++ ++#elif defined(PLATFORM_INTERFACE) ++ dev_dbg(&_dev->dev, "start=0x%08x (len 0x%x)\n", ++ (unsigned)_dev->resource->start, ++ (unsigned)(_dev->resource->end - _dev->resource->start)); ++#endif ++ ++ dwc_otg_device = DWC_ALLOC(sizeof(dwc_otg_device_t)); ++ ++ if (!dwc_otg_device) { ++ dev_err(&_dev->dev, "kmalloc of dwc_otg_device failed\n"); ++ return -ENOMEM; ++ } ++ ++ memset(dwc_otg_device, 0, sizeof(*dwc_otg_device)); ++ dwc_otg_device->os_dep.reg_offset = 0xFFFFFFFF; ++ dwc_otg_device->os_dep.platformdev = _dev; ++ ++ /* ++ * Map the DWC_otg Core memory into virtual address space. ++ */ ++#ifdef LM_INTERFACE ++ dwc_otg_device->os_dep.base = ioremap(_dev->resource.start, SZ_256K); ++ ++ if (!dwc_otg_device->os_dep.base) { ++ dev_err(&_dev->dev, "ioremap() failed\n"); ++ DWC_FREE(dwc_otg_device); ++ return -ENOMEM; ++ } ++ dev_dbg(&_dev->dev, "base=0x%08x\n", ++ (unsigned)dwc_otg_device->os_dep.base); ++#elif defined(PCI_INTERFACE) ++ _dev->current_state = PCI_D0; ++ _dev->dev.power.power_state = PMSG_ON; ++ ++ if (!_dev->irq) { ++ DWC_ERROR("Found HC with no IRQ. Check BIOS/PCI %s setup!", ++ pci_name(_dev)); ++ iounmap(dwc_otg_device->os_dep.base); ++ DWC_FREE(dwc_otg_device); ++ return -ENODEV; ++ } ++ ++ dwc_otg_device->os_dep.rsrc_start = pci_resource_start(_dev, 0); ++ dwc_otg_device->os_dep.rsrc_len = pci_resource_len(_dev, 0); ++ DWC_DEBUGPL(DBG_ANY, "PCI resource: start=%08x, len=%08x\n", ++ (unsigned)dwc_otg_device->os_dep.rsrc_start, ++ (unsigned)dwc_otg_device->os_dep.rsrc_len); ++ if (!request_mem_region ++ (dwc_otg_device->os_dep.rsrc_start, dwc_otg_device->os_dep.rsrc_len, ++ "dwc_otg")) { ++ dev_dbg(&_dev->dev, "error requesting memory\n"); ++ iounmap(dwc_otg_device->os_dep.base); ++ DWC_FREE(dwc_otg_device); ++ return -EFAULT; ++ } ++ ++ dwc_otg_device->os_dep.base = ++ ioremap_nocache(dwc_otg_device->os_dep.rsrc_start, ++ dwc_otg_device->os_dep.rsrc_len); ++ if (dwc_otg_device->os_dep.base == NULL) { ++ dev_dbg(&_dev->dev, "error mapping memory\n"); ++ release_mem_region(dwc_otg_device->os_dep.rsrc_start, ++ dwc_otg_device->os_dep.rsrc_len); ++ iounmap(dwc_otg_device->os_dep.base); ++ DWC_FREE(dwc_otg_device); ++ return -EFAULT; ++ } ++ dev_dbg(&_dev->dev, "base=0x%p (before adjust) \n", ++ dwc_otg_device->os_dep.base); ++ dwc_otg_device->os_dep.base = (char *)dwc_otg_device->os_dep.base; ++ dev_dbg(&_dev->dev, "base=0x%p (after adjust) \n", ++ dwc_otg_device->os_dep.base); ++ dev_dbg(&_dev->dev, "%s: mapped PA 0x%x to VA 0x%p\n", __func__, ++ (unsigned)dwc_otg_device->os_dep.rsrc_start, ++ dwc_otg_device->os_dep.base); ++ ++ pci_set_master(_dev); ++ pci_set_drvdata(_dev, dwc_otg_device); ++#elif defined(PLATFORM_INTERFACE) ++ DWC_DEBUGPL(DBG_ANY,"Platform resource: start=%08x, len=%08x\n", ++ _dev->resource->start, ++ _dev->resource->end - _dev->resource->start + 1); ++#if 1 ++ if (!request_mem_region(_dev->resource[0].start, ++ _dev->resource[0].end - _dev->resource[0].start + 1, ++ "dwc_otg")) { ++ dev_dbg(&_dev->dev, "error reserving mapped memory\n"); ++ retval = -EFAULT; ++ goto fail; ++ } ++ ++ dwc_otg_device->os_dep.base = ioremap_nocache(_dev->resource[0].start, ++ _dev->resource[0].end - ++ _dev->resource[0].start+1); ++ if (fiq_enable) ++ { ++ if (!request_mem_region(_dev->resource[1].start, ++ _dev->resource[1].end - _dev->resource[1].start + 1, ++ "dwc_otg")) { ++ dev_dbg(&_dev->dev, "error reserving mapped memory\n"); ++ retval = -EFAULT; ++ goto fail; ++ } ++ ++ dwc_otg_device->os_dep.mphi_base = ioremap_nocache(_dev->resource[1].start, ++ _dev->resource[1].end - ++ _dev->resource[1].start + 1); ++ } ++ ++#else ++ { ++ struct map_desc desc = { ++ .virtual = IO_ADDRESS((unsigned)_dev->resource->start), ++ .pfn = __phys_to_pfn((unsigned)_dev->resource->start), ++ .length = SZ_128K, ++ .type = MT_DEVICE ++ }; ++ iotable_init(&desc, 1); ++ dwc_otg_device->os_dep.base = (void *)desc.virtual; ++ } ++#endif ++ if (!dwc_otg_device->os_dep.base) { ++ dev_err(&_dev->dev, "ioremap() failed\n"); ++ retval = -ENOMEM; ++ goto fail; ++ } ++ dev_dbg(&_dev->dev, "base=0x%08x\n", ++ (unsigned)dwc_otg_device->os_dep.base); ++#endif ++ ++ /* ++ * Initialize driver data to point to the global DWC_otg ++ * Device structure. ++ */ ++#ifdef LM_INTERFACE ++ lm_set_drvdata(_dev, dwc_otg_device); ++#elif defined(PLATFORM_INTERFACE) ++ platform_set_drvdata(_dev, dwc_otg_device); ++#endif ++ dev_dbg(&_dev->dev, "dwc_otg_device=0x%p\n", dwc_otg_device); ++ ++ dwc_otg_device->core_if = dwc_otg_cil_init(dwc_otg_device->os_dep.base); ++ DWC_DEBUGPL(DBG_HCDV, "probe of device %p given core_if %p\n", ++ dwc_otg_device, dwc_otg_device->core_if);//GRAYG ++ ++ if (!dwc_otg_device->core_if) { ++ dev_err(&_dev->dev, "CIL initialization failed!\n"); ++ retval = -ENOMEM; ++ goto fail; ++ } ++ ++ dev_dbg(&_dev->dev, "Calling get_gsnpsid\n"); ++ /* ++ * Attempt to ensure this device is really a DWC_otg Controller. ++ * Read and verify the SNPSID register contents. The value should be ++ * 0x45F42XXX or 0x45F42XXX, which corresponds to either "OT2" or "OTG3", ++ * as in "OTG version 2.XX" or "OTG version 3.XX". ++ */ ++ ++ if (((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) != 0x4F542000) && ++ ((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) != 0x4F543000)) { ++ dev_err(&_dev->dev, "Bad value for SNPSID: 0x%08x\n", ++ dwc_otg_get_gsnpsid(dwc_otg_device->core_if)); ++ retval = -EINVAL; ++ goto fail; ++ } ++ ++ /* ++ * Validate parameter values. ++ */ ++ dev_dbg(&_dev->dev, "Calling set_parameters\n"); ++ if (set_parameters(dwc_otg_device->core_if)) { ++ retval = -EINVAL; ++ goto fail; ++ } ++ ++ /* ++ * Create Device Attributes in sysfs ++ */ ++ dev_dbg(&_dev->dev, "Calling attr_create\n"); ++ dwc_otg_attr_create(_dev); ++ ++ /* ++ * Disable the global interrupt until all the interrupt ++ * handlers are installed. ++ */ ++ dev_dbg(&_dev->dev, "Calling disable_global_interrupts\n"); ++ dwc_otg_disable_global_interrupts(dwc_otg_device->core_if); ++ ++ /* ++ * Install the interrupt handler for the common interrupts before ++ * enabling common interrupts in core_init below. ++ */ ++ ++#if defined(PLATFORM_INTERFACE) ++ devirq = platform_get_irq(_dev, fiq_enable ? 0 : 1); ++#else ++ devirq = _dev->irq; ++#endif ++ DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n", ++ devirq); ++ dev_dbg(&_dev->dev, "Calling request_irq(%d)\n", devirq); ++ retval = request_irq(devirq, dwc_otg_common_irq, ++ IRQF_SHARED, ++ "dwc_otg", dwc_otg_device); ++ if (retval) { ++ DWC_ERROR("request of irq%d failed\n", devirq); ++ retval = -EBUSY; ++ goto fail; ++ } else { ++ dwc_otg_device->common_irq_installed = 1; ++ } ++ ++#ifndef IRQF_TRIGGER_LOW ++#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) ++ dev_dbg(&_dev->dev, "Calling set_irq_type\n"); ++ set_irq_type(devirq, ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++ IRQT_LOW ++#else ++ IRQ_TYPE_LEVEL_LOW ++#endif ++ ); ++#endif ++#endif /*IRQF_TRIGGER_LOW*/ ++ ++ /* ++ * Initialize the DWC_otg core. ++ */ ++ dev_dbg(&_dev->dev, "Calling dwc_otg_core_init\n"); ++ dwc_otg_core_init(dwc_otg_device->core_if); ++ ++#ifndef DWC_HOST_ONLY ++ /* ++ * Initialize the PCD ++ */ ++ dev_dbg(&_dev->dev, "Calling pcd_init\n"); ++ retval = pcd_init(_dev); ++ if (retval != 0) { ++ DWC_ERROR("pcd_init failed\n"); ++ dwc_otg_device->pcd = NULL; ++ goto fail; ++ } ++#endif ++#ifndef DWC_DEVICE_ONLY ++ /* ++ * Initialize the HCD ++ */ ++ dev_dbg(&_dev->dev, "Calling hcd_init\n"); ++ retval = hcd_init(_dev); ++ if (retval != 0) { ++ DWC_ERROR("hcd_init failed\n"); ++ dwc_otg_device->hcd = NULL; ++ goto fail; ++ } ++#endif ++ /* Recover from drvdata having been overwritten by hcd_init() */ ++#ifdef LM_INTERFACE ++ lm_set_drvdata(_dev, dwc_otg_device); ++#elif defined(PLATFORM_INTERFACE) ++ platform_set_drvdata(_dev, dwc_otg_device); ++#elif defined(PCI_INTERFACE) ++ pci_set_drvdata(_dev, dwc_otg_device); ++ dwc_otg_device->os_dep.pcidev = _dev; ++#endif ++ ++ /* ++ * Enable the global interrupt after all the interrupt ++ * handlers are installed if there is no ADP support else ++ * perform initial actions required for Internal ADP logic. ++ */ ++ if (!dwc_otg_get_param_adp_enable(dwc_otg_device->core_if)) { ++ dev_dbg(&_dev->dev, "Calling enable_global_interrupts\n"); ++ dwc_otg_enable_global_interrupts(dwc_otg_device->core_if); ++ dev_dbg(&_dev->dev, "Done\n"); ++ } else ++ dwc_otg_adp_start(dwc_otg_device->core_if, ++ dwc_otg_is_host_mode(dwc_otg_device->core_if)); ++ ++ return 0; ++ ++fail: ++ dwc_otg_driver_remove(_dev); ++ return retval; ++} ++ ++/** ++ * This structure defines the methods to be called by a bus driver ++ * during the lifecycle of a device on that bus. Both drivers and ++ * devices are registered with a bus driver. The bus driver matches ++ * devices to drivers based on information in the device and driver ++ * structures. ++ * ++ * The probe function is called when the bus driver matches a device ++ * to this driver. The remove function is called when a device is ++ * unregistered with the bus driver. ++ */ ++#ifdef LM_INTERFACE ++static struct lm_driver dwc_otg_driver = { ++ .drv = {.name = (char *)dwc_driver_name,}, ++ .probe = dwc_otg_driver_probe, ++ .remove = dwc_otg_driver_remove, ++ // 'suspend' and 'resume' absent ++}; ++#elif defined(PCI_INTERFACE) ++static const struct pci_device_id pci_ids[] = { { ++ PCI_DEVICE(0x16c3, 0xabcd), ++ .driver_data = ++ (unsigned long)0xdeadbeef, ++ }, { /* end: all zeroes */ } ++}; ++ ++MODULE_DEVICE_TABLE(pci, pci_ids); ++ ++/* pci driver glue; this is a "new style" PCI driver module */ ++static struct pci_driver dwc_otg_driver = { ++ .name = "dwc_otg", ++ .id_table = pci_ids, ++ ++ .probe = dwc_otg_driver_probe, ++ .remove = dwc_otg_driver_remove, ++ ++ .driver = { ++ .name = (char *)dwc_driver_name, ++ }, ++}; ++#elif defined(PLATFORM_INTERFACE) ++static struct platform_device_id platform_ids[] = { ++ { ++ .name = "bcm2708_usb", ++ .driver_data = (kernel_ulong_t) 0xdeadbeef, ++ }, ++ { /* end: all zeroes */ } ++}; ++MODULE_DEVICE_TABLE(platform, platform_ids); ++ ++static const struct of_device_id dwc_otg_of_match_table[] = { ++ { .compatible = "brcm,bcm2708-usb", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, dwc_otg_of_match_table); ++ ++static struct platform_driver dwc_otg_driver = { ++ .driver = { ++ .name = (char *)dwc_driver_name, ++ .of_match_table = dwc_otg_of_match_table, ++ }, ++ .id_table = platform_ids, ++ ++ .probe = dwc_otg_driver_probe, ++ .remove = dwc_otg_driver_remove, ++ // no 'shutdown', 'suspend', 'resume', 'suspend_late' or 'resume_early' ++}; ++#endif ++ ++/** ++ * This function is called when the dwc_otg_driver is installed with the ++ * insmod command. It registers the dwc_otg_driver structure with the ++ * appropriate bus driver. This will cause the dwc_otg_driver_probe function ++ * to be called. In addition, the bus driver will automatically expose ++ * attributes defined for the device and driver in the special sysfs file ++ * system. ++ * ++ * @return ++ */ ++static int __init dwc_otg_driver_init(void) ++{ ++ int retval = 0; ++ int error; ++ struct device_driver *drv; ++ ++ if(fiq_fsm_enable && !fiq_enable) { ++ printk(KERN_WARNING "dwc_otg: fiq_fsm_enable was set without fiq_enable! Correcting.\n"); ++ fiq_enable = 1; ++ } ++ ++ printk(KERN_INFO "%s: version %s (%s bus)\n", dwc_driver_name, ++ DWC_DRIVER_VERSION, ++#ifdef LM_INTERFACE ++ "logicmodule"); ++ retval = lm_driver_register(&dwc_otg_driver); ++ drv = &dwc_otg_driver.drv; ++#elif defined(PCI_INTERFACE) ++ "pci"); ++ retval = pci_register_driver(&dwc_otg_driver); ++ drv = &dwc_otg_driver.driver; ++#elif defined(PLATFORM_INTERFACE) ++ "platform"); ++ retval = platform_driver_register(&dwc_otg_driver); ++ drv = &dwc_otg_driver.driver; ++#endif ++ if (retval < 0) { ++ printk(KERN_ERR "%s retval=%d\n", __func__, retval); ++ return retval; ++ } ++ printk(KERN_DEBUG "dwc_otg: FIQ %s\n", fiq_enable ? "enabled":"disabled"); ++ printk(KERN_DEBUG "dwc_otg: NAK holdoff %s\n", nak_holdoff ? "enabled":"disabled"); ++ printk(KERN_DEBUG "dwc_otg: FIQ split-transaction FSM %s\n", fiq_fsm_enable ? "enabled":"disabled"); ++ ++ error = driver_create_file(drv, &driver_attr_version); ++#ifdef DEBUG ++ error = driver_create_file(drv, &driver_attr_debuglevel); ++#endif ++ return retval; ++} ++ ++module_init(dwc_otg_driver_init); ++ ++/** ++ * This function is called when the driver is removed from the kernel ++ * with the rmmod command. The driver unregisters itself with its bus ++ * driver. ++ * ++ */ ++static void __exit dwc_otg_driver_cleanup(void) ++{ ++ printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n"); ++ ++#ifdef LM_INTERFACE ++ driver_remove_file(&dwc_otg_driver.drv, &driver_attr_debuglevel); ++ driver_remove_file(&dwc_otg_driver.drv, &driver_attr_version); ++ lm_driver_unregister(&dwc_otg_driver); ++#elif defined(PCI_INTERFACE) ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version); ++ pci_unregister_driver(&dwc_otg_driver); ++#elif defined(PLATFORM_INTERFACE) ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version); ++ platform_driver_unregister(&dwc_otg_driver); ++#endif ++ ++ printk(KERN_INFO "%s module removed\n", dwc_driver_name); ++} ++ ++module_exit(dwc_otg_driver_cleanup); ++ ++MODULE_DESCRIPTION(DWC_DRIVER_DESC); ++MODULE_AUTHOR("Synopsys Inc."); ++MODULE_LICENSE("GPL"); ++ ++module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444); ++MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None"); ++module_param_named(opt, dwc_otg_module_params.opt, int, 0444); ++MODULE_PARM_DESC(opt, "OPT Mode"); ++module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444); ++MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled"); ++ ++module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int, ++ 0444); ++MODULE_PARM_DESC(dma_desc_enable, ++ "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled"); ++ ++module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, ++ 0444); ++MODULE_PARM_DESC(dma_burst_size, ++ "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256"); ++module_param_named(speed, dwc_otg_module_params.speed, int, 0444); ++MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed"); ++module_param_named(host_support_fs_ls_low_power, ++ dwc_otg_module_params.host_support_fs_ls_low_power, int, ++ 0444); ++MODULE_PARM_DESC(host_support_fs_ls_low_power, ++ "Support Low Power w/FS or LS 0=Support 1=Don't Support"); ++module_param_named(host_ls_low_power_phy_clk, ++ dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444); ++MODULE_PARM_DESC(host_ls_low_power_phy_clk, ++ "Low Speed Low Power Clock 0=48Mhz 1=6Mhz"); ++module_param_named(enable_dynamic_fifo, ++ dwc_otg_module_params.enable_dynamic_fifo, int, 0444); ++MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing"); ++module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, ++ 0444); ++MODULE_PARM_DESC(data_fifo_size, ++ "Total number of words in the data FIFO memory 32-32768"); ++module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, ++ int, 0444); ++MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); ++module_param_named(dev_nperio_tx_fifo_size, ++ dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444); ++MODULE_PARM_DESC(dev_nperio_tx_fifo_size, ++ "Number of words in the non-periodic Tx FIFO 16-32768"); ++module_param_named(dev_perio_tx_fifo_size_1, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_2, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_3, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_4, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_5, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_6, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_7, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_8, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_9, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_10, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_11, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_12, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_13, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_14, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_15, ++ dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, ++ "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, ++ int, 0444); ++MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); ++module_param_named(host_nperio_tx_fifo_size, ++ dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444); ++MODULE_PARM_DESC(host_nperio_tx_fifo_size, ++ "Number of words in the non-periodic Tx FIFO 16-32768"); ++module_param_named(host_perio_tx_fifo_size, ++ dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444); ++MODULE_PARM_DESC(host_perio_tx_fifo_size, ++ "Number of words in the host periodic Tx FIFO 16-32768"); ++module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, ++ int, 0444); ++/** @todo Set the max to 512K, modify checks */ ++MODULE_PARM_DESC(max_transfer_size, ++ "The maximum transfer size supported in bytes 2047-65535"); ++module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, ++ int, 0444); ++MODULE_PARM_DESC(max_packet_count, ++ "The maximum number of packets in a transfer 15-511"); ++module_param_named(host_channels, dwc_otg_module_params.host_channels, int, ++ 0444); ++MODULE_PARM_DESC(host_channels, ++ "The number of host channel registers to use 1-16"); ++module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, ++ 0444); ++MODULE_PARM_DESC(dev_endpoints, ++ "The number of endpoints in addition to EP0 available for device mode 1-15"); ++module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444); ++MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI"); ++module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, ++ 0444); ++MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits"); ++module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444); ++MODULE_PARM_DESC(phy_ulpi_ddr, ++ "ULPI at double or single data rate 0=Single 1=Double"); ++module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, ++ int, 0444); ++MODULE_PARM_DESC(phy_ulpi_ext_vbus, ++ "ULPI PHY using internal or external vbus 0=Internal"); ++module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444); ++MODULE_PARM_DESC(i2c_enable, "FS PHY Interface"); ++module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444); ++MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only"); ++module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444); ++MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs"); ++module_param_named(debug, g_dbg_lvl, int, 0444); ++MODULE_PARM_DESC(debug, ""); ++ ++module_param_named(en_multiple_tx_fifo, ++ dwc_otg_module_params.en_multiple_tx_fifo, int, 0444); ++MODULE_PARM_DESC(en_multiple_tx_fifo, ++ "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled"); ++module_param_named(dev_tx_fifo_size_1, ++ dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_2, ++ dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_3, ++ dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_4, ++ dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_5, ++ dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_6, ++ dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_7, ++ dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_8, ++ dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_9, ++ dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_10, ++ dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_11, ++ dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_12, ++ dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_13, ++ dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_14, ++ dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_15, ++ dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768"); ++ ++module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444); ++MODULE_PARM_DESC(thr_ctl, ++ "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled"); ++module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, ++ 0444); ++MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs"); ++module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, ++ 0444); ++MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs"); ++ ++module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444); ++module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444); ++module_param_named(lpm_enable, dwc_otg_module_params.lpm_enable, int, 0444); ++MODULE_PARM_DESC(lpm_enable, "LPM Enable 0=LPM Disabled 1=LPM Enabled"); ++module_param_named(ic_usb_cap, dwc_otg_module_params.ic_usb_cap, int, 0444); ++MODULE_PARM_DESC(ic_usb_cap, ++ "IC_USB Capability 0=IC_USB Disabled 1=IC_USB Enabled"); ++module_param_named(ahb_thr_ratio, dwc_otg_module_params.ahb_thr_ratio, int, ++ 0444); ++MODULE_PARM_DESC(ahb_thr_ratio, "AHB Threshold Ratio"); ++module_param_named(power_down, dwc_otg_module_params.power_down, int, 0444); ++MODULE_PARM_DESC(power_down, "Power Down Mode"); ++module_param_named(reload_ctl, dwc_otg_module_params.reload_ctl, int, 0444); ++MODULE_PARM_DESC(reload_ctl, "HFIR Reload Control"); ++module_param_named(dev_out_nak, dwc_otg_module_params.dev_out_nak, int, 0444); ++MODULE_PARM_DESC(dev_out_nak, "Enable Device OUT NAK"); ++module_param_named(cont_on_bna, dwc_otg_module_params.cont_on_bna, int, 0444); ++MODULE_PARM_DESC(cont_on_bna, "Enable Enable Continue on BNA"); ++module_param_named(ahb_single, dwc_otg_module_params.ahb_single, int, 0444); ++MODULE_PARM_DESC(ahb_single, "Enable AHB Single Support"); ++module_param_named(adp_enable, dwc_otg_module_params.adp_enable, int, 0444); ++MODULE_PARM_DESC(adp_enable, "ADP Enable 0=ADP Disabled 1=ADP Enabled"); ++module_param_named(otg_ver, dwc_otg_module_params.otg_ver, int, 0444); ++MODULE_PARM_DESC(otg_ver, "OTG revision supported 0=OTG 1.3 1=OTG 2.0"); ++module_param(microframe_schedule, bool, 0444); ++MODULE_PARM_DESC(microframe_schedule, "Enable the microframe scheduler"); ++ ++module_param(fiq_enable, bool, 0444); ++MODULE_PARM_DESC(fiq_enable, "Enable the FIQ"); ++module_param(nak_holdoff, ushort, 0644); ++MODULE_PARM_DESC(nak_holdoff, "Throttle duration for bulk split-transaction endpoints on a NAK. Default 8"); ++module_param(fiq_fsm_enable, bool, 0444); ++MODULE_PARM_DESC(fiq_fsm_enable, "Enable the FIQ to perform split transactions as defined by fiq_fsm_mask"); ++module_param(fiq_fsm_mask, ushort, 0444); ++MODULE_PARM_DESC(fiq_fsm_mask, "Bitmask of transactions to perform in the FIQ.\n" ++ "Bit 0 : Non-periodic split transactions\n" ++ "Bit 1 : Periodic split transactions\n" ++ "Bit 2 : High-speed multi-transfer isochronous\n" ++ "All other bits should be set 0."); ++ ++ ++/** @page "Module Parameters" ++ * ++ * The following parameters may be specified when starting the module. ++ * These parameters define how the DWC_otg controller should be ++ * configured. Parameter values are passed to the CIL initialization ++ * function dwc_otg_cil_init ++ * ++ * Example: modprobe dwc_otg speed=1 otg_cap=1 ++ * ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++*/ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.h +@@ -0,0 +1,86 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $ ++ * $Revision: #19 $ ++ * $Date: 2010/11/15 $ ++ * $Change: 1627671 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#ifndef __DWC_OTG_DRIVER_H__ ++#define __DWC_OTG_DRIVER_H__ ++ ++/** @file ++ * This file contains the interface to the Linux driver. ++ */ ++#include "dwc_otg_os_dep.h" ++#include "dwc_otg_core_if.h" ++ ++/* Type declarations */ ++struct dwc_otg_pcd; ++struct dwc_otg_hcd; ++ ++/** ++ * This structure is a wrapper that encapsulates the driver components used to ++ * manage a single DWC_otg controller. ++ */ ++typedef struct dwc_otg_device { ++ /** Structure containing OS-dependent stuff. KEEP THIS STRUCT AT THE ++ * VERY BEGINNING OF THE DEVICE STRUCT. OSes such as FreeBSD and NetBSD ++ * require this. */ ++ struct os_dependent os_dep; ++ ++ /** Pointer to the core interface structure. */ ++ dwc_otg_core_if_t *core_if; ++ ++ /** Pointer to the PCD structure. */ ++ struct dwc_otg_pcd *pcd; ++ ++ /** Pointer to the HCD structure. */ ++ struct dwc_otg_hcd *hcd; ++ ++ /** Flag to indicate whether the common IRQ handler is installed. */ ++ uint8_t common_irq_installed; ++ ++} dwc_otg_device_t; ++ ++/*We must clear S3C24XX_EINTPEND external interrupt register ++ * because after clearing in this register trigerred IRQ from ++ * H/W core in kernel interrupt can be occured again before OTG ++ * handlers clear all IRQ sources of Core registers because of ++ * timing latencies and Low Level IRQ Type. ++ */ ++#ifdef CONFIG_MACH_IPMATE ++#define S3C2410X_CLEAR_EINTPEND() \ ++do { \ ++ __raw_writel(1UL << 11,S3C24XX_EINTPEND); \ ++} while (0) ++#else ++#define S3C2410X_CLEAR_EINTPEND() do { } while (0) ++#endif ++ ++#endif +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c +@@ -0,0 +1,1355 @@ ++/* ++ * dwc_otg_fiq_fsm.c - The finite state machine FIQ ++ * ++ * Copyright (c) 2013 Raspberry Pi Foundation ++ * ++ * Author: Jonathan Bell ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Raspberry Pi nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * This FIQ implements functionality that performs split transactions on ++ * the dwc_otg hardware without any outside intervention. A split transaction ++ * is "queued" by nominating a specific host channel to perform the entirety ++ * of a split transaction. This FIQ will then perform the microframe-precise ++ * scheduling required in each phase of the transaction until completion. ++ * ++ * The FIQ functionality is glued into the Synopsys driver via the entry point ++ * in the FSM enqueue function, and at the exit point in handling a HC interrupt ++ * for a FSM-enabled channel. ++ * ++ * NB: Large parts of this implementation have architecture-specific code. ++ * For porting this functionality to other ARM machines, the minimum is required: ++ * - An interrupt controller allowing the top-level dwc USB interrupt to be routed ++ * to the FIQ ++ * - A method of forcing a software generated interrupt from FIQ mode that then ++ * triggers an IRQ entry (with the dwc USB handler called by this IRQ number) ++ * - Guaranteed interrupt routing such that both the FIQ and SGI occur on the same ++ * processor core - there is no locking between the FIQ and IRQ (aside from ++ * local_fiq_disable) ++ * ++ */ ++ ++#include "dwc_otg_fiq_fsm.h" ++ ++ ++char buffer[1000*16]; ++int wptr; ++void notrace _fiq_print(enum fiq_debug_level dbg_lvl, volatile struct fiq_state *state, char *fmt, ...) ++{ ++ enum fiq_debug_level dbg_lvl_req = FIQDBG_ERR; ++ va_list args; ++ char text[17]; ++ hfnum_data_t hfnum = { .d32 = FIQ_READ(state->dwc_regs_base + 0x408) }; ++ ++ if((dbg_lvl & dbg_lvl_req) || dbg_lvl == FIQDBG_ERR) ++ { ++ snprintf(text, 9, " %4d:%1u ", hfnum.b.frnum/8, hfnum.b.frnum & 7); ++ va_start(args, fmt); ++ vsnprintf(text+8, 9, fmt, args); ++ va_end(args); ++ ++ memcpy(buffer + wptr, text, 16); ++ wptr = (wptr + 16) % sizeof(buffer); ++ } ++} ++ ++/** ++ * fiq_fsm_spin_lock() - ARMv6+ bare bones spinlock ++ * Must be called with local interrupts and FIQ disabled. ++ */ ++#if defined(CONFIG_ARCH_BCM2835) && defined(CONFIG_SMP) ++inline void fiq_fsm_spin_lock(fiq_lock_t *lock) ++{ ++ unsigned long tmp; ++ uint32_t newval; ++ fiq_lock_t lockval; ++ smp_mb__before_spinlock(); ++ /* Nested locking, yay. If we are on the same CPU as the fiq, then the disable ++ * will be sufficient. If we are on a different CPU, then the lock protects us. */ ++ prefetchw(&lock->slock); ++ asm volatile ( ++ "1: ldrex %0, [%3]\n" ++ " add %1, %0, %4\n" ++ " strex %2, %1, [%3]\n" ++ " teq %2, #0\n" ++ " bne 1b" ++ : "=&r" (lockval), "=&r" (newval), "=&r" (tmp) ++ : "r" (&lock->slock), "I" (1 << 16) ++ : "cc"); ++ ++ while (lockval.tickets.next != lockval.tickets.owner) { ++ wfe(); ++ lockval.tickets.owner = ACCESS_ONCE(lock->tickets.owner); ++ } ++ smp_mb(); ++} ++#else ++inline void fiq_fsm_spin_lock(fiq_lock_t *lock) { } ++#endif ++ ++/** ++ * fiq_fsm_spin_unlock() - ARMv6+ bare bones spinunlock ++ */ ++#if defined(CONFIG_ARCH_BCM2835) && defined(CONFIG_SMP) ++inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) ++{ ++ smp_mb(); ++ lock->tickets.owner++; ++ dsb_sev(); ++} ++#else ++inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) { } ++#endif ++ ++/** ++ * fiq_fsm_restart_channel() - Poke channel enable bit for a split transaction ++ * @channel: channel to re-enable ++ */ ++static void fiq_fsm_restart_channel(struct fiq_state *st, int n, int force) ++{ ++ hcchar_data_t hcchar = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR) }; ++ ++ hcchar.b.chen = 0; ++ if (st->channel[n].hcchar_copy.b.eptype & 0x1) { ++ hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) }; ++ /* Hardware bug workaround: update the ssplit index */ ++ if (st->channel[n].hcsplt_copy.b.spltena) ++ st->channel[n].expected_uframe = (hfnum.b.frnum + 1) & 0x3FFF; ++ ++ hcchar.b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1; ++ } ++ ++ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, hcchar.d32); ++ hcchar.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); ++ hcchar.b.chen = 1; ++ ++ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, hcchar.d32); ++ fiq_print(FIQDBG_INT, st, "HCGO %01d %01d", n, force); ++} ++ ++/** ++ * fiq_fsm_setup_csplit() - Prepare a host channel for a CSplit transaction stage ++ * @st: Pointer to the channel's state ++ * @n : channel number ++ * ++ * Change host channel registers to perform a complete-split transaction. Being mindful of the ++ * endpoint direction, set control regs up correctly. ++ */ ++static void notrace fiq_fsm_setup_csplit(struct fiq_state *st, int n) ++{ ++ hcsplt_data_t hcsplt = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT) }; ++ hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) }; ++ ++ hcsplt.b.compsplt = 1; ++ if (st->channel[n].hcchar_copy.b.epdir == 1) { ++ // If IN, the CSPLIT result contains the data or a hub handshake. hctsiz = maxpacket. ++ hctsiz.b.xfersize = st->channel[n].hctsiz_copy.b.xfersize; ++ } else { ++ // If OUT, the CSPLIT result contains handshake only. ++ hctsiz.b.xfersize = 0; ++ } ++ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT, hcsplt.d32); ++ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32); ++ mb(); ++} ++ ++static inline int notrace fiq_get_xfer_len(struct fiq_state *st, int n) ++{ ++ /* The xfersize register is a bit wonky. For IN transfers, it decrements by the packet size. */ ++ hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) }; ++ ++ if (st->channel[n].hcchar_copy.b.epdir == 0) { ++ return st->channel[n].hctsiz_copy.b.xfersize; ++ } else { ++ return st->channel[n].hctsiz_copy.b.xfersize - hctsiz.b.xfersize; ++ } ++ ++} ++ ++ ++/** ++ * fiq_increment_dma_buf() - update DMA address for bounce buffers after a CSPLIT ++ * ++ * Of use only for IN periodic transfers. ++ */ ++static int notrace fiq_increment_dma_buf(struct fiq_state *st, int num_channels, int n) ++{ ++ hcdma_data_t hcdma; ++ int i = st->channel[n].dma_info.index; ++ int len; ++ struct fiq_dma_blob *blob = (struct fiq_dma_blob *) st->dma_base; ++ ++ len = fiq_get_xfer_len(st, n); ++ fiq_print(FIQDBG_INT, st, "LEN: %03d", len); ++ st->channel[n].dma_info.slot_len[i] = len; ++ i++; ++ if (i > 6) ++ BUG(); ++ ++ hcdma.d32 = (dma_addr_t) &blob->channel[n].index[i].buf[0]; ++ FIQ_WRITE(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32); ++ st->channel[n].dma_info.index = i; ++ return 0; ++} ++ ++/** ++ * fiq_reload_hctsiz() - for IN transactions, reset HCTSIZ ++ */ ++static void notrace fiq_fsm_reload_hctsiz(struct fiq_state *st, int n) ++{ ++ hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) }; ++ hctsiz.b.xfersize = st->channel[n].hctsiz_copy.b.xfersize; ++ hctsiz.b.pktcnt = 1; ++ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32); ++} ++ ++/** ++ * fiq_iso_out_advance() - update DMA address and split position bits ++ * for isochronous OUT transactions. ++ * ++ * Returns 1 if this is the last packet queued, 0 otherwise. Split-ALL and ++ * Split-BEGIN states are not handled - this is done when the transaction was queued. ++ * ++ * This function must only be called from the FIQ_ISO_OUT_ACTIVE state. ++ */ ++static int notrace fiq_iso_out_advance(struct fiq_state *st, int num_channels, int n) ++{ ++ hcsplt_data_t hcsplt; ++ hctsiz_data_t hctsiz; ++ hcdma_data_t hcdma; ++ struct fiq_dma_blob *blob = (struct fiq_dma_blob *) st->dma_base; ++ int last = 0; ++ int i = st->channel[n].dma_info.index; ++ ++ fiq_print(FIQDBG_INT, st, "ADV %01d %01d ", n, i); ++ i++; ++ if (i == 4) ++ last = 1; ++ if (st->channel[n].dma_info.slot_len[i+1] == 255) ++ last = 1; ++ ++ /* New DMA address - address of bounce buffer referred to in index */ ++ hcdma.d32 = (uint32_t) &blob->channel[n].index[i].buf[0]; ++ //hcdma.d32 = FIQ_READ(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n)); ++ //hcdma.d32 += st->channel[n].dma_info.slot_len[i]; ++ fiq_print(FIQDBG_INT, st, "LAST: %01d ", last); ++ fiq_print(FIQDBG_INT, st, "LEN: %03d", st->channel[n].dma_info.slot_len[i]); ++ hcsplt.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT); ++ hctsiz.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ); ++ hcsplt.b.xactpos = (last) ? ISOC_XACTPOS_END : ISOC_XACTPOS_MID; ++ /* Set up new packet length */ ++ hctsiz.b.pktcnt = 1; ++ hctsiz.b.xfersize = st->channel[n].dma_info.slot_len[i]; ++ fiq_print(FIQDBG_INT, st, "%08x", hctsiz.d32); ++ ++ st->channel[n].dma_info.index++; ++ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT, hcsplt.d32); ++ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32); ++ FIQ_WRITE(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32); ++ return last; ++} ++ ++/** ++ * fiq_fsm_tt_next_isoc() - queue next pending isochronous out start-split on a TT ++ * ++ * Despite the limitations of the DWC core, we can force a microframe pipeline of ++ * isochronous OUT start-split transactions while waiting for a corresponding other-type ++ * of endpoint to finish its CSPLITs. TTs have big periodic buffers therefore it ++ * is very unlikely that filling the start-split FIFO will cause data loss. ++ * This allows much better interleaving of transactions in an order-independent way- ++ * there is no requirement to prioritise isochronous, just a state-space search has ++ * to be performed on each periodic start-split complete interrupt. ++ */ ++static int notrace fiq_fsm_tt_next_isoc(struct fiq_state *st, int num_channels, int n) ++{ ++ int hub_addr = st->channel[n].hub_addr; ++ int port_addr = st->channel[n].port_addr; ++ int i, poked = 0; ++ for (i = 0; i < num_channels; i++) { ++ if (i == n || st->channel[i].fsm == FIQ_PASSTHROUGH) ++ continue; ++ if (st->channel[i].hub_addr == hub_addr && ++ st->channel[i].port_addr == port_addr) { ++ switch (st->channel[i].fsm) { ++ case FIQ_PER_ISO_OUT_PENDING: ++ if (st->channel[i].nrpackets == 1) { ++ st->channel[i].fsm = FIQ_PER_ISO_OUT_LAST; ++ } else { ++ st->channel[i].fsm = FIQ_PER_ISO_OUT_ACTIVE; ++ } ++ fiq_fsm_restart_channel(st, i, 0); ++ poked = 1; ++ break; ++ ++ default: ++ break; ++ } ++ } ++ if (poked) ++ break; ++ } ++ return poked; ++} ++ ++/** ++ * fiq_fsm_tt_in_use() - search for host channels using this TT ++ * @n: Channel to use as reference ++ * ++ */ ++int notrace noinline fiq_fsm_tt_in_use(struct fiq_state *st, int num_channels, int n) ++{ ++ int hub_addr = st->channel[n].hub_addr; ++ int port_addr = st->channel[n].port_addr; ++ int i, in_use = 0; ++ for (i = 0; i < num_channels; i++) { ++ if (i == n || st->channel[i].fsm == FIQ_PASSTHROUGH) ++ continue; ++ switch (st->channel[i].fsm) { ++ /* TT is reserved for channels that are in the middle of a periodic ++ * split transaction. ++ */ ++ case FIQ_PER_SSPLIT_STARTED: ++ case FIQ_PER_CSPLIT_WAIT: ++ case FIQ_PER_CSPLIT_NYET1: ++ //case FIQ_PER_CSPLIT_POLL: ++ case FIQ_PER_ISO_OUT_ACTIVE: ++ case FIQ_PER_ISO_OUT_LAST: ++ if (st->channel[i].hub_addr == hub_addr && ++ st->channel[i].port_addr == port_addr) { ++ in_use = 1; ++ } ++ break; ++ default: ++ break; ++ } ++ if (in_use) ++ break; ++ } ++ return in_use; ++} ++ ++/** ++ * fiq_fsm_more_csplits() - determine whether additional CSPLITs need ++ * to be issued for this IN transaction. ++ * ++ * We cannot tell the inbound PID of a data packet due to hardware limitations. ++ * we need to make an educated guess as to whether we need to queue another CSPLIT ++ * or not. A no-brainer is when we have received enough data to fill the endpoint ++ * size, but for endpoints that give variable-length data then we have to resort ++ * to heuristics. ++ * ++ * We also return whether this is the last CSPLIT to be queued, again based on ++ * heuristics. This is to allow a 1-uframe overlap of periodic split transactions. ++ * Note: requires at least 1 CSPLIT to have been performed prior to being called. ++ */ ++ ++/* ++ * We need some way of guaranteeing if a returned periodic packet of size X ++ * has a DATA0 PID. ++ * The heuristic value of 144 bytes assumes that the received data has maximal ++ * bit-stuffing and the clock frequency of the transmitting device is at the lowest ++ * permissible limit. If the transfer length results in a final packet size ++ * 144 < p <= 188, then an erroneous CSPLIT will be issued. ++ * Also used to ensure that an endpoint will nominally only return a single ++ * complete-split worth of data. ++ */ ++#define DATA0_PID_HEURISTIC 144 ++ ++static int notrace noinline fiq_fsm_more_csplits(struct fiq_state *state, int n, int *probably_last) ++{ ++ ++ int i; ++ int total_len = 0; ++ int more_needed = 1; ++ struct fiq_channel_state *st = &state->channel[n]; ++ ++ for (i = 0; i < st->dma_info.index; i++) { ++ total_len += st->dma_info.slot_len[i]; ++ } ++ ++ *probably_last = 0; ++ ++ if (st->hcchar_copy.b.eptype == 0x3) { ++ /* ++ * An interrupt endpoint will take max 2 CSPLITs. if we are receiving data ++ * then this is definitely the last CSPLIT. ++ */ ++ *probably_last = 1; ++ } else { ++ /* Isoc IN. This is a bit risky if we are the first transaction: ++ * we may have been held off slightly. */ ++ if (i > 1 && st->dma_info.slot_len[st->dma_info.index-1] <= DATA0_PID_HEURISTIC) { ++ more_needed = 0; ++ } ++ /* If in the next uframe we will receive enough data to fill the endpoint, ++ * then only issue 1 more csplit. ++ */ ++ if (st->hctsiz_copy.b.xfersize - total_len <= DATA0_PID_HEURISTIC) ++ *probably_last = 1; ++ } ++ ++ if (total_len >= st->hctsiz_copy.b.xfersize || ++ i == 6 || total_len == 0) ++ /* Note: due to bit stuffing it is possible to have > 6 CSPLITs for ++ * a single endpoint. Accepting more would completely break our scheduling mechanism though ++ * - in these extreme cases we will pass through a truncated packet. ++ */ ++ more_needed = 0; ++ ++ return more_needed; ++} ++ ++/** ++ * fiq_fsm_too_late() - Test transaction for lateness ++ * ++ * If a SSPLIT for a large IN transaction is issued too late in a frame, ++ * the hub will disable the port to the device and respond with ERR handshakes. ++ * The hub status endpoint will not reflect this change. ++ * Returns 1 if we will issue a SSPLIT that will result in a device babble. ++ */ ++int notrace fiq_fsm_too_late(struct fiq_state *st, int n) ++{ ++ int uframe; ++ hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) }; ++ uframe = hfnum.b.frnum & 0x7; ++ if ((uframe < 6) && (st->channel[n].nrpackets + 1 + uframe > 7)) { ++ return 1; ++ } else { ++ return 0; ++ } ++} ++ ++ ++/** ++ * fiq_fsm_start_next_periodic() - A half-arsed attempt at a microframe pipeline ++ * ++ * Search pending transactions in the start-split pending state and queue them. ++ * Don't queue packets in uframe .5 (comes out in .6) (USB2.0 11.18.4). ++ * Note: we specifically don't do isochronous OUT transactions first because better ++ * use of the TT's start-split fifo can be achieved by pipelining an IN before an OUT. ++ */ ++static void notrace noinline fiq_fsm_start_next_periodic(struct fiq_state *st, int num_channels) ++{ ++ int n; ++ hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) }; ++ if ((hfnum.b.frnum & 0x7) == 5) ++ return; ++ for (n = 0; n < num_channels; n++) { ++ if (st->channel[n].fsm == FIQ_PER_SSPLIT_QUEUED) { ++ /* Check to see if any other transactions are using this TT */ ++ if(!fiq_fsm_tt_in_use(st, num_channels, n)) { ++ if (!fiq_fsm_too_late(st, n)) { ++ st->channel[n].fsm = FIQ_PER_SSPLIT_STARTED; ++ fiq_print(FIQDBG_INT, st, "NEXTPER "); ++ fiq_fsm_restart_channel(st, n, 0); ++ } else { ++ st->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT; ++ } ++ break; ++ } ++ } ++ } ++ for (n = 0; n < num_channels; n++) { ++ if (st->channel[n].fsm == FIQ_PER_ISO_OUT_PENDING) { ++ if (!fiq_fsm_tt_in_use(st, num_channels, n)) { ++ fiq_print(FIQDBG_INT, st, "NEXTISO "); ++ st->channel[n].fsm = FIQ_PER_ISO_OUT_ACTIVE; ++ fiq_fsm_restart_channel(st, n, 0); ++ break; ++ } ++ } ++ } ++} ++ ++/** ++ * fiq_fsm_update_hs_isoc() - update isochronous frame and transfer data ++ * @state: Pointer to fiq_state ++ * @n: Channel transaction is active on ++ * @hcint: Copy of host channel interrupt register ++ * ++ * Returns 0 if there are no more transactions for this HC to do, 1 ++ * otherwise. ++ */ ++static int notrace noinline fiq_fsm_update_hs_isoc(struct fiq_state *state, int n, hcint_data_t hcint) ++{ ++ struct fiq_channel_state *st = &state->channel[n]; ++ int xfer_len = 0, nrpackets = 0; ++ hcdma_data_t hcdma; ++ fiq_print(FIQDBG_INT, state, "HSISO %02d", n); ++ ++ xfer_len = fiq_get_xfer_len(state, n); ++ st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].actual_length = xfer_len; ++ ++ st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].status = hcint.d32; ++ ++ st->hs_isoc_info.index++; ++ if (st->hs_isoc_info.index == st->hs_isoc_info.nrframes) { ++ return 0; ++ } ++ ++ /* grab the next DMA address offset from the array */ ++ hcdma.d32 = st->hcdma_copy.d32 + st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].offset; ++ FIQ_WRITE(state->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32); ++ ++ /* We need to set multi_count. This is a bit tricky - has to be set per-transaction as ++ * the core needs to be told to send the correct number. Caution: for IN transfers, ++ * this is always set to the maximum size of the endpoint. */ ++ xfer_len = st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].length; ++ /* Integer divide in a FIQ: fun. FIXME: make this not suck */ ++ nrpackets = (xfer_len + st->hcchar_copy.b.mps - 1) / st->hcchar_copy.b.mps; ++ if (nrpackets == 0) ++ nrpackets = 1; ++ st->hcchar_copy.b.multicnt = nrpackets; ++ st->hctsiz_copy.b.pktcnt = nrpackets; ++ ++ /* Initial PID also needs to be set */ ++ if (st->hcchar_copy.b.epdir == 0) { ++ st->hctsiz_copy.b.xfersize = xfer_len; ++ switch (st->hcchar_copy.b.multicnt) { ++ case 1: ++ st->hctsiz_copy.b.pid = DWC_PID_DATA0; ++ break; ++ case 2: ++ case 3: ++ st->hctsiz_copy.b.pid = DWC_PID_MDATA; ++ break; ++ } ++ ++ } else { ++ switch (st->hcchar_copy.b.multicnt) { ++ st->hctsiz_copy.b.xfersize = nrpackets * st->hcchar_copy.b.mps; ++ case 1: ++ st->hctsiz_copy.b.pid = DWC_PID_DATA0; ++ break; ++ case 2: ++ st->hctsiz_copy.b.pid = DWC_PID_DATA1; ++ break; ++ case 3: ++ st->hctsiz_copy.b.pid = DWC_PID_DATA2; ++ break; ++ } ++ } ++ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, st->hctsiz_copy.d32); ++ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, st->hcchar_copy.d32); ++ /* Channel is enabled on hcint handler exit */ ++ fiq_print(FIQDBG_INT, state, "HSISOOUT"); ++ return 1; ++} ++ ++ ++/** ++ * fiq_fsm_do_sof() - FSM start-of-frame interrupt handler ++ * @state: Pointer to the state struct passed from banked FIQ mode registers. ++ * @num_channels: set according to the DWC hardware configuration ++ * ++ * The SOF handler in FSM mode has two functions ++ * 1. Hold off SOF from causing schedule advancement in IRQ context if there's ++ * nothing to do ++ * 2. Advance certain FSM states that require either a microframe delay, or a microframe ++ * of holdoff. ++ * ++ * The second part is architecture-specific to mach-bcm2835 - ++ * a sane interrupt controller would have a mask register for ARM interrupt sources ++ * to be promoted to the nFIQ line, but it doesn't. Instead a single interrupt ++ * number (USB) can be enabled. This means that certain parts of the USB specification ++ * that require "wait a little while, then issue another packet" cannot be fulfilled with ++ * the timing granularity required to achieve optimal throughout. The workaround is to use ++ * the SOF "timer" (125uS) to perform this task. ++ */ ++static int notrace noinline fiq_fsm_do_sof(struct fiq_state *state, int num_channels) ++{ ++ hfnum_data_t hfnum = { .d32 = FIQ_READ(state->dwc_regs_base + HFNUM) }; ++ int n; ++ int kick_irq = 0; ++ ++ if ((hfnum.b.frnum & 0x7) == 1) { ++ /* We cannot issue csplits for transactions in the last frame past (n+1).1 ++ * Check to see if there are any transactions that are stale. ++ * Boot them out. ++ */ ++ for (n = 0; n < num_channels; n++) { ++ switch (state->channel[n].fsm) { ++ case FIQ_PER_CSPLIT_WAIT: ++ case FIQ_PER_CSPLIT_NYET1: ++ case FIQ_PER_CSPLIT_POLL: ++ case FIQ_PER_CSPLIT_LAST: ++ /* Check if we are no longer in the same full-speed frame. */ ++ if (((state->channel[n].expected_uframe & 0x3FFF) & ~0x7) < ++ (hfnum.b.frnum & ~0x7)) ++ state->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT; ++ break; ++ default: ++ break; ++ } ++ } ++ } ++ ++ for (n = 0; n < num_channels; n++) { ++ switch (state->channel[n].fsm) { ++ ++ case FIQ_NP_SSPLIT_RETRY: ++ case FIQ_NP_IN_CSPLIT_RETRY: ++ case FIQ_NP_OUT_CSPLIT_RETRY: ++ fiq_fsm_restart_channel(state, n, 0); ++ break; ++ ++ case FIQ_HS_ISOC_SLEEPING: ++ /* Is it time to wake this channel yet? */ ++ if (--state->channel[n].uframe_sleeps == 0) { ++ state->channel[n].fsm = FIQ_HS_ISOC_TURBO; ++ fiq_fsm_restart_channel(state, n, 0); ++ } ++ break; ++ ++ case FIQ_PER_SSPLIT_QUEUED: ++ if ((hfnum.b.frnum & 0x7) == 5) ++ break; ++ if(!fiq_fsm_tt_in_use(state, num_channels, n)) { ++ if (!fiq_fsm_too_late(state, n)) { ++ fiq_print(FIQDBG_INT, state, "SOF GO %01d", n); ++ fiq_fsm_restart_channel(state, n, 0); ++ state->channel[n].fsm = FIQ_PER_SSPLIT_STARTED; ++ } else { ++ /* Transaction cannot be started without risking a device babble error */ ++ state->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT; ++ state->haintmsk_saved.b2.chint &= ~(1 << n); ++ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, 0); ++ kick_irq |= 1; ++ } ++ } ++ break; ++ ++ case FIQ_PER_ISO_OUT_PENDING: ++ /* Ordinarily, this should be poked after the SSPLIT ++ * complete interrupt for a competing transfer on the same ++ * TT. Doesn't happen for aborted transactions though. ++ */ ++ if ((hfnum.b.frnum & 0x7) >= 5) ++ break; ++ if (!fiq_fsm_tt_in_use(state, num_channels, n)) { ++ /* Hardware bug. SOF can sometimes occur after the channel halt interrupt ++ * that caused this. ++ */ ++ fiq_fsm_restart_channel(state, n, 0); ++ fiq_print(FIQDBG_INT, state, "SOF ISOC"); ++ if (state->channel[n].nrpackets == 1) { ++ state->channel[n].fsm = FIQ_PER_ISO_OUT_LAST; ++ } else { ++ state->channel[n].fsm = FIQ_PER_ISO_OUT_ACTIVE; ++ } ++ } ++ break; ++ ++ case FIQ_PER_CSPLIT_WAIT: ++ /* we are guaranteed to be in this state if and only if the SSPLIT interrupt ++ * occurred when the bus transaction occurred. The SOF interrupt reversal bug ++ * will utterly bugger this up though. ++ */ ++ if (hfnum.b.frnum != state->channel[n].expected_uframe) { ++ fiq_print(FIQDBG_INT, state, "SOFCS %d ", n); ++ state->channel[n].fsm = FIQ_PER_CSPLIT_POLL; ++ fiq_fsm_restart_channel(state, n, 0); ++ fiq_fsm_start_next_periodic(state, num_channels); ++ ++ } ++ break; ++ ++ case FIQ_PER_SPLIT_TIMEOUT: ++ case FIQ_DEQUEUE_ISSUED: ++ /* Ugly: we have to force a HCD interrupt. ++ * Poke the mask for the channel in question. ++ * We will take a fake SOF because of this, but ++ * that's OK. ++ */ ++ state->haintmsk_saved.b2.chint &= ~(1 << n); ++ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, 0); ++ kick_irq |= 1; ++ break; ++ ++ default: ++ break; ++ } ++ } ++ ++ if (state->kick_np_queues || ++ dwc_frame_num_le(state->next_sched_frame, hfnum.b.frnum)) ++ kick_irq |= 1; ++ ++ return !kick_irq; ++} ++ ++ ++/** ++ * fiq_fsm_do_hcintr() - FSM host channel interrupt handler ++ * @state: Pointer to the FIQ state struct ++ * @num_channels: Number of channels as per hardware config ++ * @n: channel for which HAINT(i) was raised ++ * ++ * An important property is that only the CHHLT interrupt is unmasked. Unfortunately, AHBerr is as well. ++ */ ++static int notrace noinline fiq_fsm_do_hcintr(struct fiq_state *state, int num_channels, int n) ++{ ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ hcint_data_t hcint_probe; ++ hcchar_data_t hcchar; ++ int handled = 0; ++ int restart = 0; ++ int last_csplit = 0; ++ int start_next_periodic = 0; ++ struct fiq_channel_state *st = &state->channel[n]; ++ hfnum_data_t hfnum; ++ ++ hcint.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINT); ++ hcintmsk.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK); ++ hcint_probe.d32 = hcint.d32 & hcintmsk.d32; ++ ++ if (st->fsm != FIQ_PASSTHROUGH) { ++ fiq_print(FIQDBG_INT, state, "HC%01d ST%02d", n, st->fsm); ++ fiq_print(FIQDBG_INT, state, "%08x", hcint.d32); ++ } ++ ++ switch (st->fsm) { ++ ++ case FIQ_PASSTHROUGH: ++ case FIQ_DEQUEUE_ISSUED: ++ /* doesn't belong to us, kick it upstairs */ ++ break; ++ ++ case FIQ_PASSTHROUGH_ERRORSTATE: ++ /* We are here to emulate the error recovery mechanism of the dwc HCD. ++ * Several interrupts are unmasked if a previous transaction failed - it's ++ * death for the FIQ to attempt to handle them as the channel isn't halted. ++ * Emulate what the HCD does in this situation: mask and continue. ++ * The FSM has no other state setup so this has to be handled out-of-band. ++ */ ++ fiq_print(FIQDBG_ERR, state, "ERRST %02d", n); ++ if (hcint_probe.b.nak || hcint_probe.b.ack || hcint_probe.b.datatglerr) { ++ fiq_print(FIQDBG_ERR, state, "RESET %02d", n); ++ /* In some random cases we can get a NAK interrupt coincident with a Xacterr ++ * interrupt, after the device has disappeared. ++ */ ++ if (!hcint.b.xacterr) ++ st->nr_errors = 0; ++ hcintmsk.b.nak = 0; ++ hcintmsk.b.ack = 0; ++ hcintmsk.b.datatglerr = 0; ++ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, hcintmsk.d32); ++ return 1; ++ } ++ if (hcint_probe.b.chhltd) { ++ fiq_print(FIQDBG_ERR, state, "CHHLT %02d", n); ++ fiq_print(FIQDBG_ERR, state, "%08x", hcint.d32); ++ return 0; ++ } ++ break; ++ ++ /* Non-periodic state groups */ ++ case FIQ_NP_SSPLIT_STARTED: ++ case FIQ_NP_SSPLIT_RETRY: ++ /* Got a HCINT for a NP SSPLIT. Expected ACK / NAK / fail */ ++ if (hcint.b.ack) { ++ /* SSPLIT complete. For OUT, the data has been sent. For IN, the LS transaction ++ * will start shortly. SOF needs to kick the transaction to prevent a NYET flood. ++ */ ++ if(st->hcchar_copy.b.epdir == 1) ++ st->fsm = FIQ_NP_IN_CSPLIT_RETRY; ++ else ++ st->fsm = FIQ_NP_OUT_CSPLIT_RETRY; ++ st->nr_errors = 0; ++ handled = 1; ++ fiq_fsm_setup_csplit(state, n); ++ } else if (hcint.b.nak) { ++ // No buffer space in TT. Retry on a uframe boundary. ++ st->fsm = FIQ_NP_SSPLIT_RETRY; ++ handled = 1; ++ } else if (hcint.b.xacterr) { ++ // The only other one we care about is xacterr. This implies HS bus error - retry. ++ st->nr_errors++; ++ st->fsm = FIQ_NP_SSPLIT_RETRY; ++ if (st->nr_errors >= 3) { ++ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; ++ } else { ++ handled = 1; ++ restart = 1; ++ } ++ } else { ++ st->fsm = FIQ_NP_SPLIT_LS_ABORTED; ++ handled = 0; ++ restart = 0; ++ } ++ break; ++ ++ case FIQ_NP_IN_CSPLIT_RETRY: ++ /* Received a CSPLIT done interrupt. ++ * Expected Data/NAK/STALL/NYET for IN. ++ */ ++ if (hcint.b.xfercomp) { ++ /* For IN, data is present. */ ++ st->fsm = FIQ_NP_SPLIT_DONE; ++ } else if (hcint.b.nak) { ++ /* no endpoint data. Punt it upstairs */ ++ st->fsm = FIQ_NP_SPLIT_DONE; ++ } else if (hcint.b.nyet) { ++ /* CSPLIT NYET - retry on a uframe boundary. */ ++ handled = 1; ++ st->nr_errors = 0; ++ } else if (hcint.b.datatglerr) { ++ /* data toggle errors do not set the xfercomp bit. */ ++ st->fsm = FIQ_NP_SPLIT_LS_ABORTED; ++ } else if (hcint.b.xacterr) { ++ /* HS error. Retry immediate */ ++ st->fsm = FIQ_NP_IN_CSPLIT_RETRY; ++ st->nr_errors++; ++ if (st->nr_errors >= 3) { ++ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; ++ } else { ++ handled = 1; ++ restart = 1; ++ } ++ } else if (hcint.b.stall || hcint.b.bblerr) { ++ /* A STALL implies either a LS bus error or a genuine STALL. */ ++ st->fsm = FIQ_NP_SPLIT_LS_ABORTED; ++ } else { ++ /* Hardware bug. It's possible in some cases to ++ * get a channel halt with nothing else set when ++ * the response was a NYET. Treat as local 3-strikes retry. ++ */ ++ hcint_data_t hcint_test = hcint; ++ hcint_test.b.chhltd = 0; ++ if (!hcint_test.d32) { ++ st->nr_errors++; ++ if (st->nr_errors >= 3) { ++ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; ++ } else { ++ handled = 1; ++ } ++ } else { ++ /* Bail out if something unexpected happened */ ++ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; ++ } ++ } ++ break; ++ ++ case FIQ_NP_OUT_CSPLIT_RETRY: ++ /* Received a CSPLIT done interrupt. ++ * Expected ACK/NAK/STALL/NYET/XFERCOMP for OUT.*/ ++ if (hcint.b.xfercomp) { ++ st->fsm = FIQ_NP_SPLIT_DONE; ++ } else if (hcint.b.nak) { ++ // The HCD will implement the holdoff on frame boundaries. ++ st->fsm = FIQ_NP_SPLIT_DONE; ++ } else if (hcint.b.nyet) { ++ // Hub still processing. ++ st->fsm = FIQ_NP_OUT_CSPLIT_RETRY; ++ handled = 1; ++ st->nr_errors = 0; ++ //restart = 1; ++ } else if (hcint.b.xacterr) { ++ /* HS error. retry immediate */ ++ st->fsm = FIQ_NP_OUT_CSPLIT_RETRY; ++ st->nr_errors++; ++ if (st->nr_errors >= 3) { ++ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; ++ } else { ++ handled = 1; ++ restart = 1; ++ } ++ } else if (hcint.b.stall) { ++ /* LS bus error or genuine stall */ ++ st->fsm = FIQ_NP_SPLIT_LS_ABORTED; ++ } else { ++ /* ++ * Hardware bug. It's possible in some cases to get a ++ * channel halt with nothing else set when the response was a NYET. ++ * Treat as local 3-strikes retry. ++ */ ++ hcint_data_t hcint_test = hcint; ++ hcint_test.b.chhltd = 0; ++ if (!hcint_test.d32) { ++ st->nr_errors++; ++ if (st->nr_errors >= 3) { ++ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; ++ } else { ++ handled = 1; ++ } ++ } else { ++ // Something unexpected happened. AHBerror or babble perhaps. Let the IRQ deal with it. ++ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; ++ } ++ } ++ break; ++ ++ /* Periodic split states (except isoc out) */ ++ case FIQ_PER_SSPLIT_STARTED: ++ /* Expect an ACK or failure for SSPLIT */ ++ if (hcint.b.ack) { ++ /* ++ * SSPLIT transfer complete interrupt - the generation of this interrupt is fraught with bugs. ++ * For a packet queued in microframe n-3 to appear in n-2, if the channel is enabled near the EOF1 ++ * point for microframe n-3, the packet will not appear on the bus until microframe n. ++ * Additionally, the generation of the actual interrupt is dodgy. For a packet appearing on the bus ++ * in microframe n, sometimes the interrupt is generated immediately. Sometimes, it appears in n+1 ++ * coincident with SOF for n+1. ++ * SOF is also buggy. It can sometimes be raised AFTER the first bus transaction has taken place. ++ * These appear to be caused by timing/clock crossing bugs within the core itself. ++ * State machine workaround. ++ */ ++ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); ++ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); ++ fiq_fsm_setup_csplit(state, n); ++ /* Poke the oddfrm bit. If we are equivalent, we received the interrupt at the correct ++ * time. If not, then we're in the next SOF. ++ */ ++ if ((hfnum.b.frnum & 0x1) == hcchar.b.oddfrm) { ++ fiq_print(FIQDBG_INT, state, "CSWAIT %01d", n); ++ st->expected_uframe = hfnum.b.frnum; ++ st->fsm = FIQ_PER_CSPLIT_WAIT; ++ } else { ++ fiq_print(FIQDBG_INT, state, "CSPOL %01d", n); ++ /* For isochronous IN endpoints, ++ * we need to hold off if we are expecting a lot of data */ ++ if (st->hcchar_copy.b.mps < DATA0_PID_HEURISTIC) { ++ start_next_periodic = 1; ++ } ++ /* Danger will robinson: we are in a broken state. If our first interrupt after ++ * this is a NYET, it will be delayed by 1 uframe and result in an unrecoverable ++ * lag. Unmask the NYET interrupt. ++ */ ++ st->expected_uframe = (hfnum.b.frnum + 1) & 0x3FFF; ++ st->fsm = FIQ_PER_CSPLIT_BROKEN_NYET1; ++ restart = 1; ++ } ++ handled = 1; ++ } else if (hcint.b.xacterr) { ++ /* 3-strikes retry is enabled, we have hit our max nr_errors */ ++ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; ++ start_next_periodic = 1; ++ } else { ++ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; ++ start_next_periodic = 1; ++ } ++ /* We can now queue the next isochronous OUT transaction, if one is pending. */ ++ if(fiq_fsm_tt_next_isoc(state, num_channels, n)) { ++ fiq_print(FIQDBG_INT, state, "NEXTISO "); ++ } ++ break; ++ ++ case FIQ_PER_CSPLIT_NYET1: ++ /* First CSPLIT attempt was a NYET. If we get a subsequent NYET, ++ * we are too late and the TT has dropped its CSPLIT fifo. ++ */ ++ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); ++ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); ++ start_next_periodic = 1; ++ if (hcint.b.nak) { ++ st->fsm = FIQ_PER_SPLIT_DONE; ++ } else if (hcint.b.xfercomp) { ++ fiq_increment_dma_buf(state, num_channels, n); ++ st->fsm = FIQ_PER_CSPLIT_POLL; ++ st->nr_errors = 0; ++ if (fiq_fsm_more_csplits(state, n, &last_csplit)) { ++ handled = 1; ++ restart = 1; ++ if (!last_csplit) ++ start_next_periodic = 0; ++ } else { ++ st->fsm = FIQ_PER_SPLIT_DONE; ++ } ++ } else if (hcint.b.nyet) { ++ /* Doh. Data lost. */ ++ st->fsm = FIQ_PER_SPLIT_NYET_ABORTED; ++ } else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) { ++ st->fsm = FIQ_PER_SPLIT_LS_ABORTED; ++ } else { ++ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; ++ } ++ break; ++ ++ case FIQ_PER_CSPLIT_BROKEN_NYET1: ++ /* ++ * we got here because our host channel is in the delayed-interrupt ++ * state and we cannot take a NYET interrupt any later than when it ++ * occurred. Disable then re-enable the channel if this happens to force ++ * CSPLITs to occur at the right time. ++ */ ++ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); ++ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); ++ fiq_print(FIQDBG_INT, state, "BROK: %01d ", n); ++ if (hcint.b.nak) { ++ st->fsm = FIQ_PER_SPLIT_DONE; ++ start_next_periodic = 1; ++ } else if (hcint.b.xfercomp) { ++ fiq_increment_dma_buf(state, num_channels, n); ++ if (fiq_fsm_more_csplits(state, n, &last_csplit)) { ++ st->fsm = FIQ_PER_CSPLIT_POLL; ++ handled = 1; ++ restart = 1; ++ start_next_periodic = 1; ++ /* Reload HCTSIZ for the next transfer */ ++ fiq_fsm_reload_hctsiz(state, n); ++ if (!last_csplit) ++ start_next_periodic = 0; ++ } else { ++ st->fsm = FIQ_PER_SPLIT_DONE; ++ } ++ } else if (hcint.b.nyet) { ++ st->fsm = FIQ_PER_SPLIT_NYET_ABORTED; ++ start_next_periodic = 1; ++ } else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) { ++ /* Local 3-strikes retry is handled by the core. This is a ERR response.*/ ++ st->fsm = FIQ_PER_SPLIT_LS_ABORTED; ++ } else { ++ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; ++ } ++ break; ++ ++ case FIQ_PER_CSPLIT_POLL: ++ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); ++ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); ++ start_next_periodic = 1; ++ if (hcint.b.nak) { ++ st->fsm = FIQ_PER_SPLIT_DONE; ++ } else if (hcint.b.xfercomp) { ++ fiq_increment_dma_buf(state, num_channels, n); ++ if (fiq_fsm_more_csplits(state, n, &last_csplit)) { ++ handled = 1; ++ restart = 1; ++ /* Reload HCTSIZ for the next transfer */ ++ fiq_fsm_reload_hctsiz(state, n); ++ if (!last_csplit) ++ start_next_periodic = 0; ++ } else { ++ st->fsm = FIQ_PER_SPLIT_DONE; ++ } ++ } else if (hcint.b.nyet) { ++ /* Are we a NYET after the first data packet? */ ++ if (st->nrpackets == 0) { ++ st->fsm = FIQ_PER_CSPLIT_NYET1; ++ handled = 1; ++ restart = 1; ++ } else { ++ /* We got a NYET when polling CSPLITs. Can happen ++ * if our heuristic fails, or if someone disables us ++ * for any significant length of time. ++ */ ++ if (st->nr_errors >= 3) { ++ st->fsm = FIQ_PER_SPLIT_NYET_ABORTED; ++ } else { ++ st->fsm = FIQ_PER_SPLIT_DONE; ++ } ++ } ++ } else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) { ++ /* For xacterr, Local 3-strikes retry is handled by the core. This is a ERR response.*/ ++ st->fsm = FIQ_PER_SPLIT_LS_ABORTED; ++ } else { ++ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; ++ } ++ break; ++ ++ case FIQ_HS_ISOC_TURBO: ++ if (fiq_fsm_update_hs_isoc(state, n, hcint)) { ++ /* more transactions to come */ ++ handled = 1; ++ fiq_print(FIQDBG_INT, state, "HSISO M "); ++ /* For strided transfers, put ourselves to sleep */ ++ if (st->hs_isoc_info.stride > 1) { ++ st->uframe_sleeps = st->hs_isoc_info.stride - 1; ++ st->fsm = FIQ_HS_ISOC_SLEEPING; ++ } else { ++ restart = 1; ++ } ++ } else { ++ st->fsm = FIQ_HS_ISOC_DONE; ++ fiq_print(FIQDBG_INT, state, "HSISO F "); ++ } ++ break; ++ ++ case FIQ_HS_ISOC_ABORTED: ++ /* This abort is called by the driver rewriting the state mid-transaction ++ * which allows the dequeue mechanism to work more effectively. ++ */ ++ break; ++ ++ case FIQ_PER_ISO_OUT_ACTIVE: ++ if (hcint.b.ack) { ++ if(fiq_iso_out_advance(state, num_channels, n)) { ++ /* last OUT transfer */ ++ st->fsm = FIQ_PER_ISO_OUT_LAST; ++ /* ++ * Assuming the periodic FIFO in the dwc core ++ * actually does its job properly, we can queue ++ * the next ssplit now and in theory, the wire ++ * transactions will be in-order. ++ */ ++ // No it doesn't. It appears to process requests in host channel order. ++ //start_next_periodic = 1; ++ } ++ handled = 1; ++ restart = 1; ++ } else { ++ /* ++ * Isochronous transactions carry on regardless. Log the error ++ * and continue. ++ */ ++ //explode += 1; ++ st->nr_errors++; ++ if(fiq_iso_out_advance(state, num_channels, n)) { ++ st->fsm = FIQ_PER_ISO_OUT_LAST; ++ //start_next_periodic = 1; ++ } ++ handled = 1; ++ restart = 1; ++ } ++ break; ++ ++ case FIQ_PER_ISO_OUT_LAST: ++ if (hcint.b.ack) { ++ /* All done here */ ++ st->fsm = FIQ_PER_ISO_OUT_DONE; ++ } else { ++ st->fsm = FIQ_PER_ISO_OUT_DONE; ++ st->nr_errors++; ++ } ++ start_next_periodic = 1; ++ break; ++ ++ case FIQ_PER_SPLIT_TIMEOUT: ++ /* SOF kicked us because we overran. */ ++ start_next_periodic = 1; ++ break; ++ ++ default: ++ break; ++ } ++ ++ if (handled) { ++ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINT, hcint.d32); ++ } else { ++ /* Copy the regs into the state so the IRQ knows what to do */ ++ st->hcint_copy.d32 = hcint.d32; ++ } ++ ++ if (restart) { ++ /* Restart always implies handled. */ ++ if (restart == 2) { ++ /* For complete-split INs, the show must go on. ++ * Force a channel restart */ ++ fiq_fsm_restart_channel(state, n, 1); ++ } else { ++ fiq_fsm_restart_channel(state, n, 0); ++ } ++ } ++ if (start_next_periodic) { ++ fiq_fsm_start_next_periodic(state, num_channels); ++ } ++ if (st->fsm != FIQ_PASSTHROUGH) ++ fiq_print(FIQDBG_INT, state, "FSMOUT%02d", st->fsm); ++ ++ return handled; ++} ++ ++ ++/** ++ * dwc_otg_fiq_fsm() - Flying State Machine (monster) FIQ ++ * @state: pointer to state struct passed from the banked FIQ mode registers. ++ * @num_channels: set according to the DWC hardware configuration ++ * @dma: pointer to DMA bounce buffers for split transaction slots ++ * ++ * The FSM FIQ performs the low-level tasks that normally would be performed by the microcode ++ * inside an EHCI or similar host controller regarding split transactions. The DWC core ++ * interrupts each and every time a split transaction packet is received or sent successfully. ++ * This results in either an interrupt storm when everything is working "properly", or ++ * the interrupt latency of the system in general breaks time-sensitive periodic split ++ * transactions. Pushing the low-level, but relatively easy state machine work into the FIQ ++ * solves these problems. ++ * ++ * Return: void ++ */ ++void notrace dwc_otg_fiq_fsm(struct fiq_state *state, int num_channels) ++{ ++ gintsts_data_t gintsts, gintsts_handled; ++ gintmsk_data_t gintmsk; ++ //hfnum_data_t hfnum; ++ haint_data_t haint, haint_handled; ++ haintmsk_data_t haintmsk; ++ int kick_irq = 0; ++ ++ gintsts_handled.d32 = 0; ++ haint_handled.d32 = 0; ++ ++ fiq_fsm_spin_lock(&state->lock); ++ gintsts.d32 = FIQ_READ(state->dwc_regs_base + GINTSTS); ++ gintmsk.d32 = FIQ_READ(state->dwc_regs_base + GINTMSK); ++ gintsts.d32 &= gintmsk.d32; ++ ++ if (gintsts.b.sofintr) { ++ /* For FSM mode, SOF is required to keep the state machine advance for ++ * certain stages of the periodic pipeline. It's death to mask this ++ * interrupt in that case. ++ */ ++ ++ if (!fiq_fsm_do_sof(state, num_channels)) { ++ /* Kick IRQ once. Queue advancement means that all pending transactions ++ * will get serviced when the IRQ finally executes. ++ */ ++ if (state->gintmsk_saved.b.sofintr == 1) ++ kick_irq |= 1; ++ state->gintmsk_saved.b.sofintr = 0; ++ } ++ gintsts_handled.b.sofintr = 1; ++ } ++ ++ if (gintsts.b.hcintr) { ++ int i; ++ haint.d32 = FIQ_READ(state->dwc_regs_base + HAINT); ++ haintmsk.d32 = FIQ_READ(state->dwc_regs_base + HAINTMSK); ++ haint.d32 &= haintmsk.d32; ++ haint_handled.d32 = 0; ++ for (i=0; ihaintmsk_saved.b2.chint &= ~(1 << i); ++ } else { ++ /* do_hcintr cleaned up after itself, but clear haint */ ++ haint_handled.b2.chint |= (1 << i); ++ } ++ } ++ } ++ ++ if (haint_handled.b2.chint) { ++ FIQ_WRITE(state->dwc_regs_base + HAINT, haint_handled.d32); ++ } ++ ++ if (haintmsk.d32 != (haintmsk.d32 & state->haintmsk_saved.d32)) { ++ /* ++ * This is necessary to avoid multiple retriggers of the MPHI in the case ++ * where interrupts are held off and HCINTs start to pile up. ++ * Only wake up the IRQ if a new interrupt came in, was not handled and was ++ * masked. ++ */ ++ haintmsk.d32 &= state->haintmsk_saved.d32; ++ FIQ_WRITE(state->dwc_regs_base + HAINTMSK, haintmsk.d32); ++ kick_irq |= 1; ++ } ++ /* Top-Level interrupt - always handled because it's level-sensitive */ ++ gintsts_handled.b.hcintr = 1; ++ } ++ ++ ++ /* Clear the bits in the saved register that were not handled but were triggered. */ ++ state->gintmsk_saved.d32 &= ~(gintsts.d32 & ~gintsts_handled.d32); ++ ++ /* FIQ didn't handle something - mask has changed - write new mask */ ++ if (gintmsk.d32 != (gintmsk.d32 & state->gintmsk_saved.d32)) { ++ gintmsk.d32 &= state->gintmsk_saved.d32; ++ gintmsk.b.sofintr = 1; ++ FIQ_WRITE(state->dwc_regs_base + GINTMSK, gintmsk.d32); ++// fiq_print(FIQDBG_INT, state, "KICKGINT"); ++// fiq_print(FIQDBG_INT, state, "%08x", gintmsk.d32); ++// fiq_print(FIQDBG_INT, state, "%08x", state->gintmsk_saved.d32); ++ kick_irq |= 1; ++ } ++ ++ if (gintsts_handled.d32) { ++ /* Only applies to edge-sensitive bits in GINTSTS */ ++ FIQ_WRITE(state->dwc_regs_base + GINTSTS, gintsts_handled.d32); ++ } ++ ++ /* We got an interrupt, didn't handle it. */ ++ if (kick_irq) { ++ state->mphi_int_count++; ++ FIQ_WRITE(state->mphi_regs.outdda, (int) state->dummy_send); ++ FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); ++ ++ } ++ state->fiq_done++; ++ mb(); ++ fiq_fsm_spin_unlock(&state->lock); ++} ++ ++ ++/** ++ * dwc_otg_fiq_nop() - FIQ "lite" ++ * @state: pointer to state struct passed from the banked FIQ mode registers. ++ * ++ * The "nop" handler does not intervene on any interrupts other than SOF. ++ * It is limited in scope to deciding at each SOF if the IRQ SOF handler (which deals ++ * with non-periodic/periodic queues) needs to be kicked. ++ * ++ * This is done to hold off the SOF interrupt, which occurs at a rate of 8000 per second. ++ * ++ * Return: void ++ */ ++void notrace dwc_otg_fiq_nop(struct fiq_state *state) ++{ ++ gintsts_data_t gintsts, gintsts_handled; ++ gintmsk_data_t gintmsk; ++ hfnum_data_t hfnum; ++ ++ fiq_fsm_spin_lock(&state->lock); ++ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); ++ gintsts.d32 = FIQ_READ(state->dwc_regs_base + GINTSTS); ++ gintmsk.d32 = FIQ_READ(state->dwc_regs_base + GINTMSK); ++ gintsts.d32 &= gintmsk.d32; ++ gintsts_handled.d32 = 0; ++ ++ if (gintsts.b.sofintr) { ++ if (!state->kick_np_queues && ++ dwc_frame_num_gt(state->next_sched_frame, hfnum.b.frnum)) { ++ /* SOF handled, no work to do, just ACK interrupt */ ++ gintsts_handled.b.sofintr = 1; ++ } else { ++ /* Kick IRQ */ ++ state->gintmsk_saved.b.sofintr = 0; ++ } ++ } ++ ++ /* Reset handled interrupts */ ++ if(gintsts_handled.d32) { ++ FIQ_WRITE(state->dwc_regs_base + GINTSTS, gintsts_handled.d32); ++ } ++ ++ /* Clear the bits in the saved register that were not handled but were triggered. */ ++ state->gintmsk_saved.d32 &= ~(gintsts.d32 & ~gintsts_handled.d32); ++ ++ /* We got an interrupt, didn't handle it and want to mask it */ ++ if (~(state->gintmsk_saved.d32)) { ++ state->mphi_int_count++; ++ gintmsk.d32 &= state->gintmsk_saved.d32; ++ FIQ_WRITE(state->dwc_regs_base + GINTMSK, gintmsk.d32); ++ /* Force a clear before another dummy send */ ++ FIQ_WRITE(state->mphi_regs.intstat, (1<<29)); ++ FIQ_WRITE(state->mphi_regs.outdda, (int) state->dummy_send); ++ FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); ++ ++ } ++ state->fiq_done++; ++ mb(); ++ fiq_fsm_spin_unlock(&state->lock); ++} +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h +@@ -0,0 +1,370 @@ ++/* ++ * dwc_otg_fiq_fsm.h - Finite state machine FIQ header definitions ++ * ++ * Copyright (c) 2013 Raspberry Pi Foundation ++ * ++ * Author: Jonathan Bell ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Raspberry Pi nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * This FIQ implements functionality that performs split transactions on ++ * the dwc_otg hardware without any outside intervention. A split transaction ++ * is "queued" by nominating a specific host channel to perform the entirety ++ * of a split transaction. This FIQ will then perform the microframe-precise ++ * scheduling required in each phase of the transaction until completion. ++ * ++ * The FIQ functionality has been surgically implanted into the Synopsys ++ * vendor-provided driver. ++ * ++ */ ++ ++#ifndef DWC_OTG_FIQ_FSM_H_ ++#define DWC_OTG_FIQ_FSM_H_ ++ ++#include "dwc_otg_regs.h" ++#include "dwc_otg_cil.h" ++#include "dwc_otg_hcd.h" ++#include ++#include ++#include ++#include ++ ++#if 0 ++#define FLAME_ON(x) \ ++do { \ ++ int gpioreg; \ ++ \ ++ gpioreg = readl(__io_address(0x20200000+0x8)); \ ++ gpioreg &= ~(7 << (x-20)*3); \ ++ gpioreg |= 0x1 << (x-20)*3; \ ++ writel(gpioreg, __io_address(0x20200000+0x8)); \ ++ \ ++ writel(1< 1, SOF wakes up the isochronous FSM */ ++ FIQ_HS_ISOC_SLEEPING = 24, ++ FIQ_HS_ISOC_DONE = 25, ++ FIQ_HS_ISOC_ABORTED = 26, ++ FIQ_DEQUEUE_ISSUED = 30, ++ FIQ_TEST = 32, ++}; ++ ++struct fiq_stack { ++ int magic1; ++ uint8_t stack[2048]; ++ int magic2; ++}; ++ ++ ++/** ++ * struct fiq_dma_info - DMA bounce buffer utilisation information (per-channel) ++ * @index: Number of slots reported used for IN transactions / number of slots ++ * transmitted for an OUT transaction ++ * @slot_len[6]: Number of actual transfer bytes in each slot (255 if unused) ++ * ++ * Split transaction transfers can have variable length depending on other bus ++ * traffic. The OTG core DMA engine requires 4-byte aligned addresses therefore ++ * each transaction needs a guaranteed aligned address. A maximum of 6 split transfers ++ * can happen per-frame. ++ */ ++struct fiq_dma_info { ++ u8 index; ++ u8 slot_len[6]; ++}; ++ ++struct __attribute__((packed)) fiq_split_dma_slot { ++ u8 buf[188]; ++}; ++ ++struct fiq_dma_channel { ++ struct __attribute__((packed)) fiq_split_dma_slot index[6]; ++}; ++ ++struct fiq_dma_blob { ++ struct __attribute__((packed)) fiq_dma_channel channel[0]; ++}; ++ ++/** ++ * struct fiq_hs_isoc_info - USB2.0 isochronous data ++ * @iso_frame: Pointer to the array of OTG URB iso_frame_descs. ++ * @nrframes: Total length of iso_frame_desc array ++ * @index: Current index (FIQ-maintained) ++ * @stride: Interval in uframes between HS isoc transactions ++ */ ++struct fiq_hs_isoc_info { ++ struct dwc_otg_hcd_iso_packet_desc *iso_desc; ++ unsigned int nrframes; ++ unsigned int index; ++ unsigned int stride; ++}; ++ ++/** ++ * struct fiq_channel_state - FIQ state machine storage ++ * @fsm: Current state of the channel as understood by the FIQ ++ * @nr_errors: Number of transaction errors on this split-transaction ++ * @hub_addr: SSPLIT/CSPLIT destination hub ++ * @port_addr: SSPLIT/CSPLIT destination port - always 1 if single TT hub ++ * @nrpackets: For isoc OUT, the number of split-OUT packets to transmit. For ++ * split-IN, number of CSPLIT data packets that were received. ++ * @hcchar_copy: ++ * @hcsplt_copy: ++ * @hcintmsk_copy: ++ * @hctsiz_copy: Copies of the host channel registers. ++ * For use as scratch, or for returning state. ++ * ++ * The fiq_channel_state is state storage between interrupts for a host channel. The ++ * FSM state is stored here. Members of this structure must only be set up by the ++ * driver prior to enabling the FIQ for this host channel, and not touched until the FIQ ++ * has updated the state to either a COMPLETE state group or ABORT state group. ++ */ ++ ++struct fiq_channel_state { ++ enum fiq_fsm_state fsm; ++ unsigned int nr_errors; ++ unsigned int hub_addr; ++ unsigned int port_addr; ++ /* Hardware bug workaround: sometimes channel halt interrupts are ++ * delayed until the next SOF. Keep track of when we expected to get interrupted. */ ++ unsigned int expected_uframe; ++ /* number of uframes remaining (for interval > 1 HS isoc transfers) before next transfer */ ++ unsigned int uframe_sleeps; ++ /* in/out for communicating number of dma buffers used, or number of ISOC to do */ ++ unsigned int nrpackets; ++ struct fiq_dma_info dma_info; ++ struct fiq_hs_isoc_info hs_isoc_info; ++ /* Copies of HC registers - in/out communication from/to IRQ handler ++ * and for ease of channel setup. A bit of mungeing is performed - for ++ * example the hctsiz.b.maxp is _always_ the max packet size of the endpoint. ++ */ ++ hcchar_data_t hcchar_copy; ++ hcsplt_data_t hcsplt_copy; ++ hcint_data_t hcint_copy; ++ hcintmsk_data_t hcintmsk_copy; ++ hctsiz_data_t hctsiz_copy; ++ hcdma_data_t hcdma_copy; ++}; ++ ++/** ++ * struct fiq_state - top-level FIQ state machine storage ++ * @mphi_regs: virtual address of the MPHI peripheral register file ++ * @dwc_regs_base: virtual address of the base of the DWC core register file ++ * @dma_base: physical address for the base of the DMA bounce buffers ++ * @dummy_send: Scratch area for sending a fake message to the MPHI peripheral ++ * @gintmsk_saved: Top-level mask of interrupts that the FIQ has not handled. ++ * Used for determining which interrupts fired to set off the IRQ handler. ++ * @haintmsk_saved: Mask of interrupts from host channels that the FIQ did not handle internally. ++ * @np_count: Non-periodic transactions in the active queue ++ * @np_sent: Count of non-periodic transactions that have completed ++ * @next_sched_frame: For periodic transactions handled by the driver's SOF-driven queuing mechanism, ++ * this is the next frame on which a SOF interrupt is required. Used to hold off ++ * passing SOF through to the driver until necessary. ++ * @channel[n]: Per-channel FIQ state. Allocated during init depending on the number of host ++ * channels configured into the core logic. ++ * ++ * This is passed as the first argument to the dwc_otg_fiq_fsm top-level FIQ handler from the asm stub. ++ * It contains top-level state information. ++ */ ++struct fiq_state { ++ fiq_lock_t lock; ++ mphi_regs_t mphi_regs; ++ void *dwc_regs_base; ++ dma_addr_t dma_base; ++ struct fiq_dma_blob *fiq_dmab; ++ void *dummy_send; ++ gintmsk_data_t gintmsk_saved; ++ haintmsk_data_t haintmsk_saved; ++ int mphi_int_count; ++ unsigned int fiq_done; ++ unsigned int kick_np_queues; ++ unsigned int next_sched_frame; ++#ifdef FIQ_DEBUG ++ char * buffer; ++ unsigned int bufsiz; ++#endif ++ struct fiq_channel_state channel[0]; ++}; ++ ++extern void fiq_fsm_spin_lock(fiq_lock_t *lock); ++ ++extern void fiq_fsm_spin_unlock(fiq_lock_t *lock); ++ ++extern int fiq_fsm_too_late(struct fiq_state *st, int n); ++ ++extern int fiq_fsm_tt_in_use(struct fiq_state *st, int num_channels, int n); ++ ++extern void dwc_otg_fiq_fsm(struct fiq_state *state, int num_channels); ++ ++extern void dwc_otg_fiq_nop(struct fiq_state *state); ++ ++#endif /* DWC_OTG_FIQ_FSM_H_ */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S +@@ -0,0 +1,80 @@ ++/* ++ * dwc_otg_fiq_fsm.S - assembly stub for the FSM FIQ ++ * ++ * Copyright (c) 2013 Raspberry Pi Foundation ++ * ++ * Author: Jonathan Bell ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Raspberry Pi nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++ ++#include ++#include ++ ++ ++.text ++ ++.global _dwc_otg_fiq_stub_end; ++ ++/** ++ * _dwc_otg_fiq_stub() - entry copied to the FIQ vector page to allow ++ * a C-style function call with arguments from the FIQ banked registers. ++ * r0 = &hcd->fiq_state ++ * r1 = &hcd->num_channels ++ * r2 = &hcd->dma_buffers ++ * Tramples: r0, r1, r2, r4, fp, ip ++ */ ++ ++ENTRY(_dwc_otg_fiq_stub) ++ /* Stash unbanked regs - SP will have been set up for us */ ++ mov ip, sp; ++ stmdb sp!, {r0-r12, lr}; ++#ifdef FIQ_DEBUG ++ // Cycle profiling - read cycle counter at start ++ mrc p15, 0, r5, c15, c12, 1; ++#endif ++ /* r11 = fp, don't trample it */ ++ mov r4, fp; ++ /* set EABI frame size */ ++ sub fp, ip, #512; ++ ++ /* for fiq NOP mode - just need state */ ++ mov r0, r8; ++ /* r9 = num_channels */ ++ mov r1, r9; ++ /* r10 = struct *dma_bufs */ ++// mov r2, r10; ++ ++ /* r4 = &fiq_c_function */ ++ blx r4; ++#ifdef FIQ_DEBUG ++ mrc p15, 0, r4, c15, c12, 1; ++ subs r5, r5, r4; ++ // r5 is now the cycle count time for executing the FIQ. Store it somewhere? ++#endif ++ ldmia sp!, {r0-r12, lr}; ++ subs pc, lr, #4; ++_dwc_otg_fiq_stub_end: ++END(_dwc_otg_fiq_stub) +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c +@@ -0,0 +1,4260 @@ ++ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $ ++ * $Revision: #104 $ ++ * $Date: 2011/10/24 $ ++ * $Change: 1871159 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** @file ++ * This file implements HCD Core. All code in this file is portable and doesn't ++ * use any OS specific functions. ++ * Interface provided by HCD Core is defined in ++ * header file. ++ */ ++ ++#include ++#include ++ ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++#include "dwc_otg_fiq_fsm.h" ++ ++extern bool microframe_schedule; ++extern uint16_t fiq_fsm_mask, nak_holdoff; ++ ++//#define DEBUG_HOST_CHANNELS ++#ifdef DEBUG_HOST_CHANNELS ++static int last_sel_trans_num_per_scheduled = 0; ++static int last_sel_trans_num_nonper_scheduled = 0; ++static int last_sel_trans_num_avail_hc_at_start = 0; ++static int last_sel_trans_num_avail_hc_at_end = 0; ++#endif /* DEBUG_HOST_CHANNELS */ ++ ++ ++dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void) ++{ ++ return DWC_ALLOC(sizeof(dwc_otg_hcd_t)); ++} ++ ++/** ++ * Connection timeout function. An OTG host is required to display a ++ * message if the device does not connect within 10 seconds. ++ */ ++void dwc_otg_hcd_connect_timeout(void *ptr) ++{ ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, ptr); ++ DWC_PRINTF("Connect Timeout\n"); ++ __DWC_ERROR("Device Not Connected/Responding\n"); ++} ++ ++#if defined(DEBUG) ++static void dump_channel_info(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ if (qh->channel != NULL) { ++ dwc_hc_t *hc = qh->channel; ++ dwc_list_link_t *item; ++ dwc_otg_qh_t *qh_item; ++ int num_channels = hcd->core_if->core_params->host_channels; ++ int i; ++ ++ dwc_otg_hc_regs_t *hc_regs; ++ hcchar_data_t hcchar; ++ hcsplt_data_t hcsplt; ++ hctsiz_data_t hctsiz; ++ uint32_t hcdma; ++ ++ hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ hcdma = DWC_READ_REG32(&hc_regs->hcdma); ++ ++ DWC_PRINTF(" Assigned to channel %p:\n", hc); ++ DWC_PRINTF(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, ++ hcsplt.d32); ++ DWC_PRINTF(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, ++ hcdma); ++ DWC_PRINTF(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", ++ hc->dev_addr, hc->ep_num, hc->ep_is_in); ++ DWC_PRINTF(" ep_type: %d\n", hc->ep_type); ++ DWC_PRINTF(" max_packet: %d\n", hc->max_packet); ++ DWC_PRINTF(" data_pid_start: %d\n", hc->data_pid_start); ++ DWC_PRINTF(" xfer_started: %d\n", hc->xfer_started); ++ DWC_PRINTF(" halt_status: %d\n", hc->halt_status); ++ DWC_PRINTF(" xfer_buff: %p\n", hc->xfer_buff); ++ DWC_PRINTF(" xfer_len: %d\n", hc->xfer_len); ++ DWC_PRINTF(" qh: %p\n", hc->qh); ++ DWC_PRINTF(" NP inactive sched:\n"); ++ DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_inactive) { ++ qh_item = ++ DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); ++ DWC_PRINTF(" %p\n", qh_item); ++ } ++ DWC_PRINTF(" NP active sched:\n"); ++ DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_active) { ++ qh_item = ++ DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); ++ DWC_PRINTF(" %p\n", qh_item); ++ } ++ DWC_PRINTF(" Channels: \n"); ++ for (i = 0; i < num_channels; i++) { ++ dwc_hc_t *hc = hcd->hc_ptr_array[i]; ++ DWC_PRINTF(" %2d: %p\n", i, hc); ++ } ++ } ++} ++#else ++#define dump_channel_info(hcd, qh) ++#endif /* DEBUG */ ++ ++/** ++ * Work queue function for starting the HCD when A-Cable is connected. ++ * The hcd_start() must be called in a process context. ++ */ ++static void hcd_start_func(void *_vp) ++{ ++ dwc_otg_hcd_t *hcd = (dwc_otg_hcd_t *) _vp; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, hcd); ++ if (hcd) { ++ hcd->fops->start(hcd); ++ } ++} ++ ++static void del_xfer_timers(dwc_otg_hcd_t * hcd) ++{ ++#ifdef DEBUG ++ int i; ++ int num_channels = hcd->core_if->core_params->host_channels; ++ for (i = 0; i < num_channels; i++) { ++ DWC_TIMER_CANCEL(hcd->core_if->hc_xfer_timer[i]); ++ } ++#endif ++} ++ ++static void del_timers(dwc_otg_hcd_t * hcd) ++{ ++ del_xfer_timers(hcd); ++ DWC_TIMER_CANCEL(hcd->conn_timer); ++} ++ ++/** ++ * Processes all the URBs in a single list of QHs. Completes them with ++ * -ESHUTDOWN and frees the QTD. ++ */ ++static void kill_urbs_in_qh_list(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list) ++{ ++ dwc_list_link_t *qh_item, *qh_tmp; ++ dwc_otg_qh_t *qh; ++ dwc_otg_qtd_t *qtd, *qtd_tmp; ++ ++ DWC_LIST_FOREACH_SAFE(qh_item, qh_tmp, qh_list) { ++ qh = DWC_LIST_ENTRY(qh_item, dwc_otg_qh_t, qh_list_entry); ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, ++ &qh->qtd_list, qtd_list_entry) { ++ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ if (qtd->urb != NULL) { ++ hcd->fops->complete(hcd, qtd->urb->priv, ++ qtd->urb, -DWC_E_SHUTDOWN); ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ } ++ ++ } ++ if(qh->channel) { ++ /* Using hcchar.chen == 1 is not a reliable test. ++ * It is possible that the channel has already halted ++ * but not yet been through the IRQ handler. ++ */ ++ dwc_otg_hc_halt(hcd->core_if, qh->channel, ++ DWC_OTG_HC_XFER_URB_DEQUEUE); ++ if(microframe_schedule) ++ hcd->available_host_channels++; ++ qh->channel = NULL; ++ } ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ } ++} ++ ++/** ++ * Responds with an error status of ESHUTDOWN to all URBs in the non-periodic ++ * and periodic schedules. The QTD associated with each URB is removed from ++ * the schedule and freed. This function may be called when a disconnect is ++ * detected or when the HCD is being stopped. ++ */ ++static void kill_all_urbs(dwc_otg_hcd_t * hcd) ++{ ++ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive); ++ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued); ++} ++ ++/** ++ * Start the connection timer. An OTG host is required to display a ++ * message if the device does not connect within 10 seconds. The ++ * timer is deleted if a port connect interrupt occurs before the ++ * timer expires. ++ */ ++static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t * hcd) ++{ ++ DWC_TIMER_SCHEDULE(hcd->conn_timer, 10000 /* 10 secs */ ); ++} ++ ++/** ++ * HCD Callback function for disconnect of the HCD. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int32_t dwc_otg_hcd_session_start_cb(void *p) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd; ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); ++ dwc_otg_hcd = p; ++ dwc_otg_hcd_start_connect_timer(dwc_otg_hcd); ++ return 1; ++} ++ ++/** ++ * HCD Callback function for starting the HCD when A-Cable is ++ * connected. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int32_t dwc_otg_hcd_start_cb(void *p) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = p; ++ dwc_otg_core_if_t *core_if; ++ hprt0_data_t hprt0; ++ ++ core_if = dwc_otg_hcd->core_if; ++ ++ if (core_if->op_state == B_HOST) { ++ /* ++ * Reset the port. During a HNP mode switch the reset ++ * needs to occur within 1ms and have a duration of at ++ * least 50ms. ++ */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtrst = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ } ++ DWC_WORKQ_SCHEDULE_DELAYED(core_if->wq_otg, ++ hcd_start_func, dwc_otg_hcd, 50, ++ "start hcd"); ++ ++ return 1; ++} ++ ++/** ++ * HCD Callback function for disconnect of the HCD. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int32_t dwc_otg_hcd_disconnect_cb(void *p) ++{ ++ gintsts_data_t intr; ++ dwc_otg_hcd_t *dwc_otg_hcd = p; ++ ++ /* ++ * Set status flags for the hub driver. ++ */ ++ dwc_otg_hcd->flags.b.port_connect_status_change = 1; ++ dwc_otg_hcd->flags.b.port_connect_status = 0; ++ if(fiq_enable) ++ local_fiq_disable(); ++ /* ++ * Shutdown any transfers in process by clearing the Tx FIFO Empty ++ * interrupt mask and status bits and disabling subsequent host ++ * channel interrupts. ++ */ ++ intr.d32 = 0; ++ intr.b.nptxfempty = 1; ++ intr.b.ptxfempty = 1; ++ intr.b.hcintr = 1; ++ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, ++ intr.d32, 0); ++ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintsts, ++ intr.d32, 0); ++ ++ del_timers(dwc_otg_hcd); ++ ++ /* ++ * Turn off the vbus power only if the core has transitioned to device ++ * mode. If still in host mode, need to keep power on to detect a ++ * reconnection. ++ */ ++ if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) { ++ if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) { ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ DWC_PRINTF("Disconnect: PortPower off\n"); ++ hprt0.b.prtpwr = 0; ++ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, ++ hprt0.d32); ++ } ++ ++ dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if); ++ } ++ ++ /* Respond with an error status to all URBs in the schedule. */ ++ kill_all_urbs(dwc_otg_hcd); ++ ++ if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) { ++ /* Clean up any host channels that were in use. */ ++ int num_channels; ++ int i; ++ dwc_hc_t *channel; ++ dwc_otg_hc_regs_t *hc_regs; ++ hcchar_data_t hcchar; ++ ++ num_channels = dwc_otg_hcd->core_if->core_params->host_channels; ++ ++ if (!dwc_otg_hcd->core_if->dma_enable) { ++ /* Flush out any channel requests in slave mode. */ ++ for (i = 0; i < num_channels; i++) { ++ channel = dwc_otg_hcd->hc_ptr_array[i]; ++ if (DWC_CIRCLEQ_EMPTY_ENTRY ++ (channel, hc_list_entry)) { ++ hc_regs = ++ dwc_otg_hcd->core_if-> ++ host_if->hc_regs[i]; ++ hcchar.d32 = ++ DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ hcchar.b.chen = 0; ++ hcchar.b.chdis = 1; ++ hcchar.b.epdir = 0; ++ DWC_WRITE_REG32 ++ (&hc_regs->hcchar, ++ hcchar.d32); ++ } ++ } ++ } ++ } ++ ++ for (i = 0; i < num_channels; i++) { ++ channel = dwc_otg_hcd->hc_ptr_array[i]; ++ if (DWC_CIRCLEQ_EMPTY_ENTRY(channel, hc_list_entry)) { ++ hc_regs = ++ dwc_otg_hcd->core_if->host_if->hc_regs[i]; ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ /* Halt the channel. */ ++ hcchar.b.chdis = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, ++ hcchar.d32); ++ } ++ ++ dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, ++ channel); ++ DWC_CIRCLEQ_INSERT_TAIL ++ (&dwc_otg_hcd->free_hc_list, channel, ++ hc_list_entry); ++ /* ++ * Added for Descriptor DMA to prevent channel double cleanup ++ * in release_channel_ddma(). Which called from ep_disable ++ * when device disconnect. ++ */ ++ channel->qh = NULL; ++ } ++ } ++ if(fiq_fsm_enable) { ++ for(i=0; i < 128; i++) { ++ dwc_otg_hcd->hub_port[i] = 0; ++ } ++ } ++ ++ } ++ ++ if(fiq_enable) ++ local_fiq_enable(); ++ ++ if (dwc_otg_hcd->fops->disconnect) { ++ dwc_otg_hcd->fops->disconnect(dwc_otg_hcd); ++ } ++ ++ return 1; ++} ++ ++/** ++ * HCD Callback function for stopping the HCD. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int32_t dwc_otg_hcd_stop_cb(void *p) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = p; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); ++ dwc_otg_hcd_stop(dwc_otg_hcd); ++ return 1; ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** ++ * HCD Callback function for sleep of HCD. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int dwc_otg_hcd_sleep_cb(void *p) ++{ ++ dwc_otg_hcd_t *hcd = p; ++ ++ dwc_otg_hcd_free_hc_from_lpm(hcd); ++ ++ return 0; ++} ++#endif ++ ++ ++/** ++ * HCD Callback function for Remote Wakeup. ++ * ++ * @param p void pointer to the struct usb_hcd ++ */ ++static int dwc_otg_hcd_rem_wakeup_cb(void *p) ++{ ++ dwc_otg_hcd_t *hcd = p; ++ ++ if (hcd->core_if->lx_state == DWC_OTG_L2) { ++ hcd->flags.b.port_suspend_change = 1; ++ } ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ else { ++ hcd->flags.b.port_l1_change = 1; ++ } ++#endif ++ return 0; ++} ++ ++/** ++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are ++ * stopped. ++ */ ++void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd) ++{ ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n"); ++ ++ /* ++ * The root hub should be disconnected before this function is called. ++ * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) ++ * and the QH lists (via ..._hcd_endpoint_disable). ++ */ ++ ++ /* Turn off all host-specific interrupts. */ ++ dwc_otg_disable_host_interrupts(hcd->core_if); ++ ++ /* Turn off the vbus power */ ++ DWC_PRINTF("PortPower off\n"); ++ hprt0.b.prtpwr = 0; ++ DWC_WRITE_REG32(hcd->core_if->host_if->hprt0, hprt0.d32); ++ dwc_mdelay(1); ++} ++ ++int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * hcd, ++ dwc_otg_hcd_urb_t * dwc_otg_urb, void **ep_handle, ++ int atomic_alloc) ++{ ++ int retval = 0; ++ uint8_t needs_scheduling = 0; ++ dwc_otg_transaction_type_e tr_type; ++ dwc_otg_qtd_t *qtd; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ hprt0_data_t hprt0 = { .d32 = 0 }; ++ ++#ifdef DEBUG /* integrity checks (Broadcom) */ ++ if (NULL == hcd->core_if) { ++ DWC_ERROR("**** DWC OTG HCD URB Enqueue - HCD has NULL core_if\n"); ++ /* No longer connected. */ ++ return -DWC_E_INVALID; ++ } ++#endif ++ if (!hcd->flags.b.port_connect_status) { ++ /* No longer connected. */ ++ DWC_ERROR("Not connected\n"); ++ return -DWC_E_NO_DEVICE; ++ } ++ ++ /* Some core configurations cannot support LS traffic on a FS root port */ ++ if ((hcd->fops->speed(hcd, dwc_otg_urb->priv) == USB_SPEED_LOW) && ++ (hcd->core_if->hwcfg2.b.fs_phy_type == 1) && ++ (hcd->core_if->hwcfg2.b.hs_phy_type == 1)) { ++ hprt0.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0); ++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED) { ++ return -DWC_E_NO_DEVICE; ++ } ++ } ++ ++ qtd = dwc_otg_hcd_qtd_create(dwc_otg_urb, atomic_alloc); ++ if (qtd == NULL) { ++ DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++#ifdef DEBUG /* integrity checks (Broadcom) */ ++ if (qtd->urb == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD with no URBs\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++ if (qtd->urb->priv == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD URB with no URB handle\n"); ++ return -DWC_E_NO_MEMORY; ++ } ++#endif ++ intr_mask.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->gintmsk); ++ if(!intr_mask.b.sofintr || fiq_enable) needs_scheduling = 1; ++ if((((dwc_otg_qh_t *)ep_handle)->ep_type == UE_BULK) && !(qtd->urb->flags & URB_GIVEBACK_ASAP)) ++ /* Do not schedule SG transactions until qtd has URB_GIVEBACK_ASAP set */ ++ needs_scheduling = 0; ++ ++ retval = dwc_otg_hcd_qtd_add(qtd, hcd, (dwc_otg_qh_t **) ep_handle, atomic_alloc); ++ // creates a new queue in ep_handle if it doesn't exist already ++ if (retval < 0) { ++ DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. " ++ "Error status %d\n", retval); ++ dwc_otg_hcd_qtd_free(qtd); ++ return retval; ++ } ++ ++ if(needs_scheduling) { ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE) { ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ } ++ } ++ return retval; ++} ++ ++int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * hcd, ++ dwc_otg_hcd_urb_t * dwc_otg_urb) ++{ ++ dwc_otg_qh_t *qh; ++ dwc_otg_qtd_t *urb_qtd; ++ BUG_ON(!hcd); ++ BUG_ON(!dwc_otg_urb); ++ ++#ifdef DEBUG /* integrity checks (Broadcom) */ ++ ++ if (hcd == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL HCD\n"); ++ return -DWC_E_INVALID; ++ } ++ if (dwc_otg_urb == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL URB\n"); ++ return -DWC_E_INVALID; ++ } ++ if (dwc_otg_urb->qtd == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue with NULL QTD\n"); ++ return -DWC_E_INVALID; ++ } ++ urb_qtd = dwc_otg_urb->qtd; ++ BUG_ON(!urb_qtd); ++ if (urb_qtd->qh == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue with QTD with NULL Q handler\n"); ++ return -DWC_E_INVALID; ++ } ++#else ++ urb_qtd = dwc_otg_urb->qtd; ++ BUG_ON(!urb_qtd); ++#endif ++ qh = urb_qtd->qh; ++ BUG_ON(!qh); ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ if (urb_qtd->in_process) { ++ dump_channel_info(hcd, qh); ++ } ++ } ++#ifdef DEBUG /* integrity checks (Broadcom) */ ++ if (hcd->core_if == NULL) { ++ DWC_ERROR("**** DWC OTG HCD URB Dequeue HCD has NULL core_if\n"); ++ return -DWC_E_INVALID; ++ } ++#endif ++ if (urb_qtd->in_process && qh->channel) { ++ /* The QTD is in process (it has been assigned to a channel). */ ++ if (hcd->flags.b.port_connect_status) { ++ int n = qh->channel->hc_num; ++ /* ++ * If still connected (i.e. in host mode), halt the ++ * channel so it can be used for other transfers. If ++ * no longer connected, the host registers can't be ++ * written to halt the channel since the core is in ++ * device mode. ++ */ ++ /* In FIQ FSM mode, we need to shut down carefully. ++ * The FIQ may attempt to restart a disabled channel */ ++ if (fiq_fsm_enable && (hcd->fiq_state->channel[n].fsm != FIQ_PASSTHROUGH)) { ++ qh->channel->halt_status = DWC_OTG_HC_XFER_URB_DEQUEUE; ++ qh->channel->halt_pending = 1; ++ hcd->fiq_state->channel[n].fsm = FIQ_DEQUEUE_ISSUED; ++ } else { ++ dwc_otg_hc_halt(hcd->core_if, qh->channel, ++ DWC_OTG_HC_XFER_URB_DEQUEUE); ++ } ++ } ++ } ++ ++ /* ++ * Free the QTD and clean up the associated QH. Leave the QH in the ++ * schedule if it has any remaining QTDs. ++ */ ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue - " ++ "delete %sQueue handler\n", ++ hcd->core_if->dma_desc_enable?"DMA ":""); ++ if (!hcd->core_if->dma_desc_enable) { ++ uint8_t b = urb_qtd->in_process; ++ dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh); ++ if (b) { ++ dwc_otg_hcd_qh_deactivate(hcd, qh, 0); ++ qh->channel = NULL; ++ } else if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ } ++ } else { ++ dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh); ++ } ++ return 0; ++} ++ ++int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle, ++ int retry) ++{ ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ int retval = 0; ++ dwc_irqflags_t flags; ++ ++ if (retry < 0) { ++ retval = -DWC_E_INVALID; ++ goto done; ++ } ++ ++ if (!qh) { ++ retval = -DWC_E_INVALID; ++ goto done; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ ++ while (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list) && retry) { ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ retry--; ++ dwc_msleep(5); ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ } ++ ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ /* ++ * Split dwc_otg_hcd_qh_remove_and_free() into qh_remove ++ * and qh_free to prevent stack dump on DWC_DMA_FREE() with ++ * irq_disabled (spinlock_irqsave) in dwc_otg_hcd_desc_list_free() ++ * and dwc_otg_hcd_frame_list_alloc(). ++ */ ++ dwc_otg_hcd_qh_free(hcd, qh); ++ ++done: ++ return retval; ++} ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) ++int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle) ++{ ++ int retval = 0; ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ if (!qh) ++ return -DWC_E_INVALID; ++ ++ qh->data_toggle = DWC_OTG_HC_PID_DATA0; ++ return retval; ++} ++#endif ++ ++/** ++ * HCD Callback structure for handling mode switching. ++ */ ++static dwc_otg_cil_callbacks_t hcd_cil_callbacks = { ++ .start = dwc_otg_hcd_start_cb, ++ .stop = dwc_otg_hcd_stop_cb, ++ .disconnect = dwc_otg_hcd_disconnect_cb, ++ .session_start = dwc_otg_hcd_session_start_cb, ++ .resume_wakeup = dwc_otg_hcd_rem_wakeup_cb, ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ .sleep = dwc_otg_hcd_sleep_cb, ++#endif ++ .p = 0, ++}; ++ ++/** ++ * Reset tasklet function ++ */ ++static void reset_tasklet_func(void *data) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *) data; ++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; ++ hprt0_data_t hprt0; ++ ++ DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n"); ++ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtrst = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ dwc_mdelay(60); ++ ++ hprt0.b.prtrst = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ dwc_otg_hcd->flags.b.port_reset_change = 1; ++} ++ ++static void completion_tasklet_func(void *ptr) ++{ ++ dwc_otg_hcd_t *hcd = (dwc_otg_hcd_t *) ptr; ++ struct urb *urb; ++ urb_tq_entry_t *item; ++ dwc_irqflags_t flags; ++ ++ /* This could just be spin_lock_irq */ ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ while (!DWC_TAILQ_EMPTY(&hcd->completed_urb_list)) { ++ item = DWC_TAILQ_FIRST(&hcd->completed_urb_list); ++ urb = item->urb; ++ DWC_TAILQ_REMOVE(&hcd->completed_urb_list, item, ++ urb_tq_entries); ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ DWC_FREE(item); ++ ++ usb_hcd_giveback_urb(hcd->priv, urb, urb->status); ++ ++ ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ } ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ return; ++} ++ ++static void qh_list_free(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list) ++{ ++ dwc_list_link_t *item; ++ dwc_otg_qh_t *qh; ++ dwc_irqflags_t flags; ++ ++ if (!qh_list->next) { ++ /* The list hasn't been initialized yet. */ ++ return; ++ } ++ /* ++ * Hold spinlock here. Not needed in that case if bellow ++ * function is being called from ISR ++ */ ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ /* Ensure there are no QTDs or URBs left. */ ++ kill_urbs_in_qh_list(hcd, qh_list); ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ ++ DWC_LIST_FOREACH(item, qh_list) { ++ qh = DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); ++ dwc_otg_hcd_qh_remove_and_free(hcd, qh); ++ } ++} ++ ++/** ++ * Exit from Hibernation if Host did not detect SRP from connected SRP capable ++ * Device during SRP time by host power up. ++ */ ++void dwc_otg_hcd_power_up(void *ptr) ++{ ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; ++ ++ DWC_PRINTF("%s called\n", __FUNCTION__); ++ ++ if (!core_if->hibernation_suspend) { ++ DWC_PRINTF("Already exited from Hibernation\n"); ++ return; ++ } ++ ++ /* Switch on the voltage to the core */ ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Reset the core */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Disable power clamps */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ /* Remove reset the core signal */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnrstn = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Disable PMU interrupt */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ core_if->hibernation_suspend = 0; ++ ++ /* Disable PMU */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ dwc_udelay(10); ++ ++ /* Enable VBUS */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.dis_vbus = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); ++ ++ core_if->op_state = A_HOST; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_hcd_start(core_if); ++} ++ ++void dwc_otg_cleanup_fiq_channel(dwc_otg_hcd_t *hcd, uint32_t num) ++{ ++ struct fiq_channel_state *st = &hcd->fiq_state->channel[num]; ++ struct fiq_dma_blob *blob = hcd->fiq_dmab; ++ int i; ++ ++ st->fsm = FIQ_PASSTHROUGH; ++ st->hcchar_copy.d32 = 0; ++ st->hcsplt_copy.d32 = 0; ++ st->hcint_copy.d32 = 0; ++ st->hcintmsk_copy.d32 = 0; ++ st->hctsiz_copy.d32 = 0; ++ st->hcdma_copy.d32 = 0; ++ st->nr_errors = 0; ++ st->hub_addr = 0; ++ st->port_addr = 0; ++ st->expected_uframe = 0; ++ st->nrpackets = 0; ++ st->dma_info.index = 0; ++ for (i = 0; i < 6; i++) ++ st->dma_info.slot_len[i] = 255; ++ st->hs_isoc_info.index = 0; ++ st->hs_isoc_info.iso_desc = NULL; ++ st->hs_isoc_info.nrframes = 0; ++ ++ DWC_MEMSET(&blob->channel[num].index[0], 0x6b, 1128); ++} ++ ++/** ++ * Frees secondary storage associated with the dwc_otg_hcd structure contained ++ * in the struct usb_hcd field. ++ */ ++static void dwc_otg_hcd_free(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ struct device *dev = dwc_otg_hcd_to_dev(dwc_otg_hcd); ++ int i; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n"); ++ ++ del_timers(dwc_otg_hcd); ++ ++ /* Free memory for QH/QTD lists */ ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued); ++ ++ /* Free memory for the host channels. */ ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i]; ++ ++#ifdef DEBUG ++ if (dwc_otg_hcd->core_if->hc_xfer_timer[i]) { ++ DWC_TIMER_FREE(dwc_otg_hcd->core_if->hc_xfer_timer[i]); ++ } ++#endif ++ if (hc != NULL) { ++ DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", ++ i, hc); ++ DWC_FREE(hc); ++ } ++ } ++ ++ if (dwc_otg_hcd->core_if->dma_enable) { ++ if (dwc_otg_hcd->status_buf_dma) { ++ DWC_DMA_FREE(dev, DWC_OTG_HCD_STATUS_BUF_SIZE, ++ dwc_otg_hcd->status_buf, ++ dwc_otg_hcd->status_buf_dma); ++ } ++ } else if (dwc_otg_hcd->status_buf != NULL) { ++ DWC_FREE(dwc_otg_hcd->status_buf); ++ } ++ DWC_SPINLOCK_FREE(dwc_otg_hcd->channel_lock); ++ DWC_SPINLOCK_FREE(dwc_otg_hcd->lock); ++ /* Set core_if's lock pointer to NULL */ ++ dwc_otg_hcd->core_if->lock = NULL; ++ ++ DWC_TIMER_FREE(dwc_otg_hcd->conn_timer); ++ DWC_TASK_FREE(dwc_otg_hcd->reset_tasklet); ++ DWC_TASK_FREE(dwc_otg_hcd->completion_tasklet); ++ DWC_FREE(dwc_otg_hcd->fiq_state); ++ ++#ifdef DWC_DEV_SRPCAP ++ if (dwc_otg_hcd->core_if->power_down == 2 && ++ dwc_otg_hcd->core_if->pwron_timer) { ++ DWC_TIMER_FREE(dwc_otg_hcd->core_if->pwron_timer); ++ } ++#endif ++ DWC_FREE(dwc_otg_hcd); ++} ++ ++int init_hcd_usecs(dwc_otg_hcd_t *_hcd); ++ ++int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if) ++{ ++ struct device *dev = dwc_otg_hcd_to_dev(hcd); ++ int retval = 0; ++ int num_channels; ++ int i; ++ dwc_hc_t *channel; ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK)) ++ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(hcd->lock); ++ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(hcd->channel_lock); ++#else ++ hcd->lock = DWC_SPINLOCK_ALLOC(); ++ hcd->channel_lock = DWC_SPINLOCK_ALLOC(); ++#endif ++ DWC_DEBUGPL(DBG_HCDV, "init of HCD %p given core_if %p\n", ++ hcd, core_if); ++ if (!hcd->lock) { ++ DWC_ERROR("Could not allocate lock for pcd"); ++ DWC_FREE(hcd); ++ retval = -DWC_E_NO_MEMORY; ++ goto out; ++ } ++ hcd->core_if = core_if; ++ ++ /* Register the HCD CIL Callbacks */ ++ dwc_otg_cil_register_hcd_callbacks(hcd->core_if, ++ &hcd_cil_callbacks, hcd); ++ ++ /* Initialize the non-periodic schedule. */ ++ DWC_LIST_INIT(&hcd->non_periodic_sched_inactive); ++ DWC_LIST_INIT(&hcd->non_periodic_sched_active); ++ ++ /* Initialize the periodic schedule. */ ++ DWC_LIST_INIT(&hcd->periodic_sched_inactive); ++ DWC_LIST_INIT(&hcd->periodic_sched_ready); ++ DWC_LIST_INIT(&hcd->periodic_sched_assigned); ++ DWC_LIST_INIT(&hcd->periodic_sched_queued); ++ DWC_TAILQ_INIT(&hcd->completed_urb_list); ++ /* ++ * Create a host channel descriptor for each host channel implemented ++ * in the controller. Initialize the channel descriptor array. ++ */ ++ DWC_CIRCLEQ_INIT(&hcd->free_hc_list); ++ num_channels = hcd->core_if->core_params->host_channels; ++ DWC_MEMSET(hcd->hc_ptr_array, 0, sizeof(hcd->hc_ptr_array)); ++ for (i = 0; i < num_channels; i++) { ++ channel = DWC_ALLOC(sizeof(dwc_hc_t)); ++ if (channel == NULL) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: host channel allocation failed\n", ++ __func__); ++ dwc_otg_hcd_free(hcd); ++ goto out; ++ } ++ channel->hc_num = i; ++ hcd->hc_ptr_array[i] = channel; ++#ifdef DEBUG ++ hcd->core_if->hc_xfer_timer[i] = ++ DWC_TIMER_ALLOC("hc timer", hc_xfer_timeout, ++ &hcd->core_if->hc_xfer_info[i]); ++#endif ++ DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, ++ channel); ++ } ++ ++ if (fiq_enable) { ++ hcd->fiq_state = DWC_ALLOC(sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels)); ++ if (!hcd->fiq_state) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: cannot allocate fiq_state structure\n", __func__); ++ dwc_otg_hcd_free(hcd); ++ goto out; ++ } ++ DWC_MEMSET(hcd->fiq_state, 0, (sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels))); ++ ++ for (i = 0; i < num_channels; i++) { ++ hcd->fiq_state->channel[i].fsm = FIQ_PASSTHROUGH; ++ } ++ hcd->fiq_state->dummy_send = DWC_ALLOC_ATOMIC(16); ++ ++ hcd->fiq_stack = DWC_ALLOC(sizeof(struct fiq_stack)); ++ if (!hcd->fiq_stack) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: cannot allocate fiq_stack structure\n", __func__); ++ dwc_otg_hcd_free(hcd); ++ goto out; ++ } ++ hcd->fiq_stack->magic1 = 0xDEADBEEF; ++ hcd->fiq_stack->magic2 = 0xD00DFEED; ++ hcd->fiq_state->gintmsk_saved.d32 = ~0; ++ hcd->fiq_state->haintmsk_saved.b2.chint = ~0; ++ ++ /* This bit is terrible and uses no API, but necessary. The FIQ has no concept of DMA pools ++ * (and if it did, would be a lot slower). This allocates a chunk of memory (~9kiB for 8 host channels) ++ * for use as transaction bounce buffers in a 2-D array. Our access into this chunk is done by some ++ * moderately readable array casts. ++ */ ++ hcd->fiq_dmab = DWC_DMA_ALLOC(dev, (sizeof(struct fiq_dma_channel) * num_channels), &hcd->fiq_state->dma_base); ++ DWC_WARN("FIQ DMA bounce buffers: virt = 0x%08x dma = 0x%08x len=%d", ++ (unsigned int)hcd->fiq_dmab, (unsigned int)hcd->fiq_state->dma_base, ++ sizeof(struct fiq_dma_channel) * num_channels); ++ ++ DWC_MEMSET(hcd->fiq_dmab, 0x6b, 9024); ++ ++ /* pointer for debug in fiq_print */ ++ hcd->fiq_state->fiq_dmab = hcd->fiq_dmab; ++ if (fiq_fsm_enable) { ++ int i; ++ for (i=0; i < hcd->core_if->core_params->host_channels; i++) { ++ dwc_otg_cleanup_fiq_channel(hcd, i); ++ } ++ DWC_PRINTF("FIQ FSM acceleration enabled for :\n%s%s%s%s", ++ (fiq_fsm_mask & 0x1) ? "Non-periodic Split Transactions\n" : "", ++ (fiq_fsm_mask & 0x2) ? "Periodic Split Transactions\n" : "", ++ (fiq_fsm_mask & 0x4) ? "High-Speed Isochronous Endpoints\n" : "", ++ (fiq_fsm_mask & 0x8) ? "Interrupt/Control Split Transaction hack enabled\n" : ""); ++ } ++ } ++ ++ /* Initialize the Connection timeout timer. */ ++ hcd->conn_timer = DWC_TIMER_ALLOC("Connection timer", ++ dwc_otg_hcd_connect_timeout, 0); ++ ++ printk(KERN_DEBUG "dwc_otg: Microframe scheduler %s\n", microframe_schedule ? "enabled":"disabled"); ++ if (microframe_schedule) ++ init_hcd_usecs(hcd); ++ ++ /* Initialize reset tasklet. */ ++ hcd->reset_tasklet = DWC_TASK_ALLOC("reset_tasklet", reset_tasklet_func, hcd); ++ ++ hcd->completion_tasklet = DWC_TASK_ALLOC("completion_tasklet", ++ completion_tasklet_func, hcd); ++#ifdef DWC_DEV_SRPCAP ++ if (hcd->core_if->power_down == 2) { ++ /* Initialize Power on timer for Host power up in case hibernation */ ++ hcd->core_if->pwron_timer = DWC_TIMER_ALLOC("PWRON TIMER", ++ dwc_otg_hcd_power_up, core_if); ++ } ++#endif ++ ++ /* ++ * Allocate space for storing data on status transactions. Normally no ++ * data is sent, but this space acts as a bit bucket. This must be ++ * done after usb_add_hcd since that function allocates the DMA buffer ++ * pool. ++ */ ++ if (hcd->core_if->dma_enable) { ++ hcd->status_buf = ++ DWC_DMA_ALLOC(dev, DWC_OTG_HCD_STATUS_BUF_SIZE, ++ &hcd->status_buf_dma); ++ } else { ++ hcd->status_buf = DWC_ALLOC(DWC_OTG_HCD_STATUS_BUF_SIZE); ++ } ++ if (!hcd->status_buf) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: status_buf allocation failed\n", __func__); ++ dwc_otg_hcd_free(hcd); ++ goto out; ++ } ++ ++ hcd->otg_port = 1; ++ hcd->frame_list = NULL; ++ hcd->frame_list_dma = 0; ++ hcd->periodic_qh_count = 0; ++ ++ DWC_MEMSET(hcd->hub_port, 0, sizeof(hcd->hub_port)); ++#ifdef FIQ_DEBUG ++ DWC_MEMSET(hcd->hub_port_alloc, -1, sizeof(hcd->hub_port_alloc)); ++#endif ++ ++out: ++ return retval; ++} ++ ++void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd) ++{ ++ /* Turn off all host-specific interrupts. */ ++ dwc_otg_disable_host_interrupts(hcd->core_if); ++ ++ dwc_otg_hcd_free(hcd); ++} ++ ++/** ++ * Initializes dynamic portions of the DWC_otg HCD state. ++ */ ++static void dwc_otg_hcd_reinit(dwc_otg_hcd_t * hcd) ++{ ++ int num_channels; ++ int i; ++ dwc_hc_t *channel; ++ dwc_hc_t *channel_tmp; ++ ++ hcd->flags.d32 = 0; ++ ++ hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active; ++ if (!microframe_schedule) { ++ hcd->non_periodic_channels = 0; ++ hcd->periodic_channels = 0; ++ } else { ++ hcd->available_host_channels = hcd->core_if->core_params->host_channels; ++ } ++ /* ++ * Put all channels in the free channel list and clean up channel ++ * states. ++ */ ++ DWC_CIRCLEQ_FOREACH_SAFE(channel, channel_tmp, ++ &hcd->free_hc_list, hc_list_entry) { ++ DWC_CIRCLEQ_REMOVE(&hcd->free_hc_list, channel, hc_list_entry); ++ } ++ ++ num_channels = hcd->core_if->core_params->host_channels; ++ for (i = 0; i < num_channels; i++) { ++ channel = hcd->hc_ptr_array[i]; ++ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, channel, ++ hc_list_entry); ++ dwc_otg_hc_cleanup(hcd->core_if, channel); ++ } ++ ++ /* Initialize the DWC core for host mode operation. */ ++ dwc_otg_core_host_init(hcd->core_if); ++ ++ /* Set core_if's lock pointer to the hcd->lock */ ++ hcd->core_if->lock = hcd->lock; ++} ++ ++/** ++ * Assigns transactions from a QTD to a free host channel and initializes the ++ * host channel to perform the transactions. The host channel is removed from ++ * the free list. ++ * ++ * @param hcd The HCD state structure. ++ * @param qh Transactions from the first QTD for this QH are selected and ++ * assigned to a free host channel. ++ */ ++static void assign_and_init_hc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ dwc_hc_t *hc; ++ dwc_otg_qtd_t *qtd; ++ dwc_otg_hcd_urb_t *urb; ++ void* ptr = NULL; ++ uint32_t intr_enable; ++ unsigned long flags; ++ gintmsk_data_t gintmsk = { .d32 = 0, }; ++ struct device *dev = dwc_otg_hcd_to_dev(hcd); ++ ++ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ ++ urb = qtd->urb; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p) - urb %x, actual_length %d\n", __func__, hcd, qh, (unsigned int)urb, urb->actual_length); ++ ++ if (((urb->actual_length < 0) || (urb->actual_length > urb->length)) && !dwc_otg_hcd_is_pipe_in(&urb->pipe_info)) ++ urb->actual_length = urb->length; ++ ++ ++ hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list); ++ ++ /* Remove the host channel from the free list. */ ++ DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry); ++ ++ qh->channel = hc; ++ ++ qtd->in_process = 1; ++ ++ /* ++ * Use usb_pipedevice to determine device address. This address is ++ * 0 before the SET_ADDRESS command and the correct address afterward. ++ */ ++ hc->dev_addr = dwc_otg_hcd_get_dev_addr(&urb->pipe_info); ++ hc->ep_num = dwc_otg_hcd_get_ep_num(&urb->pipe_info); ++ hc->speed = qh->dev_speed; ++ hc->max_packet = dwc_max_packet(qh->maxp); ++ ++ hc->xfer_started = 0; ++ hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS; ++ hc->error_state = (qtd->error_count > 0); ++ hc->halt_on_queue = 0; ++ hc->halt_pending = 0; ++ hc->requests = 0; ++ ++ /* ++ * The following values may be modified in the transfer type section ++ * below. The xfer_len value may be reduced when the transfer is ++ * started to accommodate the max widths of the XferSize and PktCnt ++ * fields in the HCTSIZn register. ++ */ ++ ++ hc->ep_is_in = (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) != 0); ++ if (hc->ep_is_in) { ++ hc->do_ping = 0; ++ } else { ++ hc->do_ping = qh->ping_state; ++ } ++ ++ hc->data_pid_start = qh->data_toggle; ++ hc->multi_count = 1; ++ ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *) urb->dma + urb->actual_length; ++ ++ /* For non-dword aligned case */ ++ if (((unsigned long)hc->xfer_buff & 0x3) ++ && !hcd->core_if->dma_desc_enable) { ++ ptr = (uint8_t *) urb->buf + urb->actual_length; ++ } ++ } else { ++ hc->xfer_buff = (uint8_t *) urb->buf + urb->actual_length; ++ } ++ hc->xfer_len = urb->length - urb->actual_length; ++ hc->xfer_count = 0; ++ ++ /* ++ * Set the split attributes ++ */ ++ hc->do_split = 0; ++ if (qh->do_split) { ++ uint32_t hub_addr, port_addr; ++ hc->do_split = 1; ++ hc->xact_pos = qtd->isoc_split_pos; ++ /* We don't need to do complete splits anymore */ ++// if(fiq_fsm_enable) ++ if (0) ++ hc->complete_split = qtd->complete_split = 0; ++ else ++ hc->complete_split = qtd->complete_split; ++ ++ hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &port_addr); ++ hc->hub_addr = (uint8_t) hub_addr; ++ hc->port_addr = (uint8_t) port_addr; ++ } ++ ++ switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) { ++ case UE_CONTROL: ++ hc->ep_type = DWC_OTG_EP_TYPE_CONTROL; ++ switch (qtd->control_phase) { ++ case DWC_OTG_CONTROL_SETUP: ++ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n"); ++ hc->do_ping = 0; ++ hc->ep_is_in = 0; ++ hc->data_pid_start = DWC_OTG_HC_PID_SETUP; ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *) urb->setup_dma; ++ } else { ++ hc->xfer_buff = (uint8_t *) urb->setup_packet; ++ } ++ hc->xfer_len = 8; ++ ptr = NULL; ++ break; ++ case DWC_OTG_CONTROL_DATA: ++ DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n"); ++ hc->data_pid_start = qtd->data_toggle; ++ break; ++ case DWC_OTG_CONTROL_STATUS: ++ /* ++ * Direction is opposite of data direction or IN if no ++ * data. ++ */ ++ DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n"); ++ if (urb->length == 0) { ++ hc->ep_is_in = 1; ++ } else { ++ hc->ep_is_in = ++ dwc_otg_hcd_is_pipe_out(&urb->pipe_info); ++ } ++ if (hc->ep_is_in) { ++ hc->do_ping = 0; ++ } ++ ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA1; ++ ++ hc->xfer_len = 0; ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *) hcd->status_buf_dma; ++ } else { ++ hc->xfer_buff = (uint8_t *) hcd->status_buf; ++ } ++ ptr = NULL; ++ break; ++ } ++ break; ++ case UE_BULK: ++ hc->ep_type = DWC_OTG_EP_TYPE_BULK; ++ break; ++ case UE_INTERRUPT: ++ hc->ep_type = DWC_OTG_EP_TYPE_INTR; ++ break; ++ case UE_ISOCHRONOUS: ++ { ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ ++ hc->ep_type = DWC_OTG_EP_TYPE_ISOC; ++ ++ if (hcd->core_if->dma_desc_enable) ++ break; ++ ++ frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; ++ ++ frame_desc->status = 0; ++ ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *) urb->dma; ++ } else { ++ hc->xfer_buff = (uint8_t *) urb->buf; ++ } ++ hc->xfer_buff += ++ frame_desc->offset + qtd->isoc_split_offset; ++ hc->xfer_len = ++ frame_desc->length - qtd->isoc_split_offset; ++ ++ /* For non-dword aligned buffers */ ++ if (((unsigned long)hc->xfer_buff & 0x3) ++ && hcd->core_if->dma_enable) { ++ ptr = ++ (uint8_t *) urb->buf + frame_desc->offset + ++ qtd->isoc_split_offset; ++ } else ++ ptr = NULL; ++ ++ if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) { ++ if (hc->xfer_len <= 188) { ++ hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL; ++ } else { ++ hc->xact_pos = ++ DWC_HCSPLIT_XACTPOS_BEGIN; ++ } ++ } ++ } ++ break; ++ } ++ /* non DWORD-aligned buffer case */ ++ if (ptr) { ++ uint32_t buf_size; ++ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { ++ buf_size = hcd->core_if->core_params->max_transfer_size; ++ } else { ++ buf_size = 4096; ++ } ++ if (!qh->dw_align_buf) { ++ qh->dw_align_buf = DWC_DMA_ALLOC_ATOMIC(dev, buf_size, ++ &qh->dw_align_buf_dma); ++ if (!qh->dw_align_buf) { ++ DWC_ERROR ++ ("%s: Failed to allocate memory to handle " ++ "non-dword aligned buffer case\n", ++ __func__); ++ return; ++ } ++ } ++ if (!hc->ep_is_in) { ++ dwc_memcpy(qh->dw_align_buf, ptr, hc->xfer_len); ++ } ++ hc->align_buff = qh->dw_align_buf_dma; ++ } else { ++ hc->align_buff = 0; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * This value may be modified when the transfer is started to ++ * reflect the actual transfer length. ++ */ ++ hc->multi_count = dwc_hb_mult(qh->maxp); ++ } ++ ++ if (hcd->core_if->dma_desc_enable) ++ hc->desc_list_addr = qh->desc_list_dma; ++ ++ dwc_otg_hc_init(hcd->core_if, hc); ++ ++ local_irq_save(flags); ++ ++ if (fiq_enable) { ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&hcd->fiq_state->lock); ++ } ++ ++ /* Enable the top level host channel interrupt. */ ++ intr_enable = (1 << hc->hc_num); ++ DWC_MODIFY_REG32(&hcd->core_if->host_if->host_global_regs->haintmsk, 0, intr_enable); ++ ++ /* Make sure host channel interrupts are enabled. */ ++ gintmsk.b.hcintr = 1; ++ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, 0, gintmsk.d32); ++ ++ if (fiq_enable) { ++ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } ++ ++ local_irq_restore(flags); ++ hc->qh = qh; ++} ++ ++ ++/** ++ * fiq_fsm_transaction_suitable() - Test a QH for compatibility with the FIQ ++ * @qh: pointer to the endpoint's queue head ++ * ++ * Transaction start/end control flow is grafted onto the existing dwc_otg ++ * mechanisms, to avoid spaghettifying the functions more than they already are. ++ * This function's eligibility check is altered by debug parameter. ++ * ++ * Returns: 0 for unsuitable, 1 implies the FIQ can be enabled for this transaction. ++ */ ++ ++int fiq_fsm_transaction_suitable(dwc_otg_qh_t *qh) ++{ ++ if (qh->do_split) { ++ switch (qh->ep_type) { ++ case UE_CONTROL: ++ case UE_BULK: ++ if (fiq_fsm_mask & (1 << 0)) ++ return 1; ++ break; ++ case UE_INTERRUPT: ++ case UE_ISOCHRONOUS: ++ if (fiq_fsm_mask & (1 << 1)) ++ return 1; ++ break; ++ default: ++ break; ++ } ++ } else if (qh->ep_type == UE_ISOCHRONOUS) { ++ if (fiq_fsm_mask & (1 << 2)) { ++ /* HS ISOCH support. We test for compatibility: ++ * - DWORD aligned buffers ++ * - Must be at least 2 transfers (otherwise pointless to use the FIQ) ++ * If yes, then the fsm enqueue function will handle the state machine setup. ++ */ ++ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ struct dwc_otg_hcd_iso_packet_desc (*iso_descs)[0] = &urb->iso_descs; ++ int nr_iso_frames = urb->packet_count; ++ int i; ++ uint32_t ptr; ++ ++ if (nr_iso_frames < 2) ++ return 0; ++ for (i = 0; i < nr_iso_frames; i++) { ++ ptr = urb->dma + iso_descs[i]->offset; ++ if (ptr & 0x3) { ++ printk_ratelimited("%s: Non-Dword aligned isochronous frame offset." ++ " Cannot queue FIQ-accelerated transfer to device %d endpoint %d\n", ++ __FUNCTION__, qh->channel->dev_addr, qh->channel->ep_num); ++ return 0; ++ } ++ } ++ return 1; ++ } ++ } ++ return 0; ++} ++ ++/** ++ * fiq_fsm_setup_periodic_dma() - Set up DMA bounce buffers ++ * @hcd: Pointer to the dwc_otg_hcd struct ++ * @qh: Pointer to the endpoint's queue head ++ * ++ * Periodic split transactions are transmitted modulo 188 bytes. ++ * This necessitates slicing data up into buckets for isochronous out ++ * and fixing up the DMA address for all IN transfers. ++ * ++ * Returns 1 if the DMA bounce buffers have been used, 0 if the default ++ * HC buffer has been used. ++ */ ++int fiq_fsm_setup_periodic_dma(dwc_otg_hcd_t *hcd, struct fiq_channel_state *st, dwc_otg_qh_t *qh) ++ { ++ int frame_length, i = 0; ++ uint8_t *ptr = NULL; ++ dwc_hc_t *hc = qh->channel; ++ struct fiq_dma_blob *blob; ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ ++ for (i = 0; i < 6; i++) { ++ st->dma_info.slot_len[i] = 255; ++ } ++ st->dma_info.index = 0; ++ i = 0; ++ if (hc->ep_is_in) { ++ /* ++ * Set dma_regs to bounce buffer. FIQ will update the ++ * state depending on transaction progress. ++ */ ++ blob = (struct fiq_dma_blob *) hcd->fiq_state->dma_base; ++ st->hcdma_copy.d32 = (uint32_t) &blob->channel[hc->hc_num].index[0].buf[0]; ++ /* Calculate the max number of CSPLITS such that the FIQ can time out ++ * a transaction if it fails. ++ */ ++ frame_length = st->hcchar_copy.b.mps; ++ do { ++ i++; ++ frame_length -= 188; ++ } while (frame_length >= 0); ++ st->nrpackets = i; ++ return 1; ++ } else { ++ if (qh->ep_type == UE_ISOCHRONOUS) { ++ ++ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ ++ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ frame_length = frame_desc->length; ++ ++ /* Virtual address for bounce buffers */ ++ blob = hcd->fiq_dmab; ++ ++ ptr = qtd->urb->buf + frame_desc->offset; ++ if (frame_length == 0) { ++ /* ++ * for isochronous transactions, we must still transmit a packet ++ * even if the length is zero. ++ */ ++ st->dma_info.slot_len[0] = 0; ++ st->nrpackets = 1; ++ } else { ++ do { ++ if (frame_length <= 188) { ++ dwc_memcpy(&blob->channel[hc->hc_num].index[i].buf[0], ptr, frame_length); ++ st->dma_info.slot_len[i] = frame_length; ++ ptr += frame_length; ++ } else { ++ dwc_memcpy(&blob->channel[hc->hc_num].index[i].buf[0], ptr, 188); ++ st->dma_info.slot_len[i] = 188; ++ ptr += 188; ++ } ++ i++; ++ frame_length -= 188; ++ } while (frame_length > 0); ++ st->nrpackets = i; ++ } ++ ptr = qtd->urb->buf + frame_desc->offset; ++ /* Point the HC at the DMA address of the bounce buffers */ ++ blob = (struct fiq_dma_blob *) hcd->fiq_state->dma_base; ++ st->hcdma_copy.d32 = (uint32_t) &blob->channel[hc->hc_num].index[0].buf[0]; ++ ++ /* fixup xfersize to the actual packet size */ ++ st->hctsiz_copy.b.pid = 0; ++ st->hctsiz_copy.b.xfersize = st->dma_info.slot_len[0]; ++ return 1; ++ } else { ++ /* For interrupt, single OUT packet required, goes in the SSPLIT from hc_buff. */ ++ return 0; ++ } ++ } ++} ++ ++/* ++ * Pushing a periodic request into the queue near the EOF1 point ++ * in a microframe causes erroneous behaviour (frmovrun) interrupt. ++ * Usually, the request goes out on the bus causing a transfer but ++ * the core does not transfer the data to memory. ++ * This guard interval (in number of 60MHz clocks) is required which ++ * must cater for CPU latency between reading the value and enabling ++ * the channel. ++ */ ++#define PERIODIC_FRREM_BACKOFF 1000 ++ ++int fiq_fsm_queue_isoc_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) ++{ ++ dwc_hc_t *hc = qh->channel; ++ dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; ++ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ int frame; ++ struct fiq_channel_state *st = &hcd->fiq_state->channel[hc->hc_num]; ++ int xfer_len, nrpackets; ++ hcdma_data_t hcdma; ++ hfnum_data_t hfnum; ++ ++ if (st->fsm != FIQ_PASSTHROUGH) ++ return 0; ++ ++ st->nr_errors = 0; ++ ++ st->hcchar_copy.d32 = 0; ++ st->hcchar_copy.b.mps = hc->max_packet; ++ st->hcchar_copy.b.epdir = hc->ep_is_in; ++ st->hcchar_copy.b.devaddr = hc->dev_addr; ++ st->hcchar_copy.b.epnum = hc->ep_num; ++ st->hcchar_copy.b.eptype = hc->ep_type; ++ ++ st->hcintmsk_copy.b.chhltd = 1; ++ ++ frame = dwc_otg_hcd_get_frame_number(hcd); ++ st->hcchar_copy.b.oddfrm = (frame & 0x1) ? 0 : 1; ++ ++ st->hcchar_copy.b.lspddev = 0; ++ /* Enable the channel later as a final register write. */ ++ ++ st->hcsplt_copy.d32 = 0; ++ ++ st->hs_isoc_info.iso_desc = (struct dwc_otg_hcd_iso_packet_desc *) &qtd->urb->iso_descs; ++ st->hs_isoc_info.nrframes = qtd->urb->packet_count; ++ /* grab the next DMA address offset from the array */ ++ st->hcdma_copy.d32 = qtd->urb->dma; ++ hcdma.d32 = st->hcdma_copy.d32 + st->hs_isoc_info.iso_desc[0].offset; ++ ++ /* We need to set multi_count. This is a bit tricky - has to be set per-transaction as ++ * the core needs to be told to send the correct number. Caution: for IN transfers, ++ * this is always set to the maximum size of the endpoint. */ ++ xfer_len = st->hs_isoc_info.iso_desc[0].length; ++ nrpackets = (xfer_len + st->hcchar_copy.b.mps - 1) / st->hcchar_copy.b.mps; ++ if (nrpackets == 0) ++ nrpackets = 1; ++ st->hcchar_copy.b.multicnt = nrpackets; ++ st->hctsiz_copy.b.pktcnt = nrpackets; ++ ++ /* Initial PID also needs to be set */ ++ if (st->hcchar_copy.b.epdir == 0) { ++ st->hctsiz_copy.b.xfersize = xfer_len; ++ switch (st->hcchar_copy.b.multicnt) { ++ case 1: ++ st->hctsiz_copy.b.pid = DWC_PID_DATA0; ++ break; ++ case 2: ++ case 3: ++ st->hctsiz_copy.b.pid = DWC_PID_MDATA; ++ break; ++ } ++ ++ } else { ++ st->hctsiz_copy.b.xfersize = nrpackets * st->hcchar_copy.b.mps; ++ switch (st->hcchar_copy.b.multicnt) { ++ case 1: ++ st->hctsiz_copy.b.pid = DWC_PID_DATA0; ++ break; ++ case 2: ++ st->hctsiz_copy.b.pid = DWC_PID_DATA1; ++ break; ++ case 3: ++ st->hctsiz_copy.b.pid = DWC_PID_DATA2; ++ break; ++ } ++ } ++ ++ st->hs_isoc_info.stride = qh->interval; ++ st->uframe_sleeps = 0; ++ ++ fiq_print(FIQDBG_INT, hcd->fiq_state, "FSMQ %01d ", hc->hc_num); ++ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcchar_copy.d32); ++ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hctsiz_copy.d32); ++ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcdma_copy.d32); ++ hfnum.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum); ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&hcd->fiq_state->lock); ++ DWC_WRITE_REG32(&hc_regs->hctsiz, st->hctsiz_copy.d32); ++ DWC_WRITE_REG32(&hc_regs->hcsplt, st->hcsplt_copy.d32); ++ DWC_WRITE_REG32(&hc_regs->hcdma, st->hcdma_copy.d32); ++ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32); ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, st->hcintmsk_copy.d32); ++ if (hfnum.b.frrem < PERIODIC_FRREM_BACKOFF) { ++ /* Prevent queueing near EOF1. Bad things happen if a periodic ++ * split transaction is queued very close to EOF. SOF interrupt handler ++ * will wake this channel at the next interrupt. ++ */ ++ st->fsm = FIQ_HS_ISOC_SLEEPING; ++ st->uframe_sleeps = 1; ++ } else { ++ st->fsm = FIQ_HS_ISOC_TURBO; ++ st->hcchar_copy.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32); ++ } ++ mb(); ++ st->hcchar_copy.b.chen = 0; ++ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); ++ local_fiq_enable(); ++ return 0; ++} ++ ++ ++/** ++ * fiq_fsm_queue_split_transaction() - Set up a host channel and FIQ state ++ * @hcd: Pointer to the dwc_otg_hcd struct ++ * @qh: Pointer to the endpoint's queue head ++ * ++ * This overrides the dwc_otg driver's normal method of queueing a transaction. ++ * Called from dwc_otg_hcd_queue_transactions(), this performs specific setup ++ * for the nominated host channel. ++ * ++ * For periodic transfers, it also peeks at the FIQ state to see if an immediate ++ * start is possible. If not, then the FIQ is left to start the transfer. ++ */ ++int fiq_fsm_queue_split_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) ++{ ++ int start_immediate = 1, i; ++ hfnum_data_t hfnum; ++ dwc_hc_t *hc = qh->channel; ++ dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; ++ /* Program HC registers, setup FIQ_state, examine FIQ if periodic, start transfer (not if uframe 5) */ ++ int hub_addr, port_addr, frame, uframe; ++ struct fiq_channel_state *st = &hcd->fiq_state->channel[hc->hc_num]; ++ ++ if (st->fsm != FIQ_PASSTHROUGH) ++ return 0; ++ st->nr_errors = 0; ++ ++ st->hcchar_copy.d32 = 0; ++ st->hcchar_copy.b.mps = hc->max_packet; ++ st->hcchar_copy.b.epdir = hc->ep_is_in; ++ st->hcchar_copy.b.devaddr = hc->dev_addr; ++ st->hcchar_copy.b.epnum = hc->ep_num; ++ st->hcchar_copy.b.eptype = hc->ep_type; ++ if (hc->ep_type & 0x1) { ++ if (hc->ep_is_in) ++ st->hcchar_copy.b.multicnt = 3; ++ else ++ /* Docs say set this to 1, but driver sets to 0! */ ++ st->hcchar_copy.b.multicnt = 0; ++ } else { ++ st->hcchar_copy.b.multicnt = 1; ++ st->hcchar_copy.b.oddfrm = 0; ++ } ++ st->hcchar_copy.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW) ? 1 : 0; ++ /* Enable the channel later as a final register write. */ ++ ++ st->hcsplt_copy.d32 = 0; ++ if(qh->do_split) { ++ hcd->fops->hub_info(hcd, DWC_CIRCLEQ_FIRST(&qh->qtd_list)->urb->priv, &hub_addr, &port_addr); ++ st->hcsplt_copy.b.compsplt = 0; ++ st->hcsplt_copy.b.spltena = 1; ++ // XACTPOS is for isoc-out only but needs initialising anyway. ++ st->hcsplt_copy.b.xactpos = ISOC_XACTPOS_ALL; ++ if((qh->ep_type == DWC_OTG_EP_TYPE_ISOC) && (!qh->ep_is_in)) { ++ /* For packetsize 0 < L < 188, ISOC_XACTPOS_ALL. ++ * for longer than this, ISOC_XACTPOS_BEGIN and the FIQ ++ * will update as necessary. ++ */ ++ if (hc->xfer_len > 188) { ++ st->hcsplt_copy.b.xactpos = ISOC_XACTPOS_BEGIN; ++ } ++ } ++ st->hcsplt_copy.b.hubaddr = (uint8_t) hub_addr; ++ st->hcsplt_copy.b.prtaddr = (uint8_t) port_addr; ++ st->hub_addr = hub_addr; ++ st->port_addr = port_addr; ++ } ++ ++ st->hctsiz_copy.d32 = 0; ++ st->hctsiz_copy.b.dopng = 0; ++ st->hctsiz_copy.b.pid = hc->data_pid_start; ++ ++ if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) { ++ hc->xfer_len = hc->max_packet; ++ } else if (!hc->ep_is_in && (hc->xfer_len > 188)) { ++ hc->xfer_len = 188; ++ } ++ st->hctsiz_copy.b.xfersize = hc->xfer_len; ++ ++ st->hctsiz_copy.b.pktcnt = 1; ++ ++ if (hc->ep_type & 0x1) { ++ /* ++ * For potentially multi-packet transfers, must use the DMA bounce buffers. For IN transfers, ++ * the DMA address is the address of the first 188byte slot buffer in the bounce buffer array. ++ * For multi-packet OUT transfers, we need to copy the data into the bounce buffer array so the FIQ can punt ++ * the right address out as necessary. hc->xfer_buff and hc->xfer_len have already been set ++ * in assign_and_init_hc(), but this is for the eventual transaction completion only. The FIQ ++ * must not touch internal driver state. ++ */ ++ if(!fiq_fsm_setup_periodic_dma(hcd, st, qh)) { ++ if (hc->align_buff) { ++ st->hcdma_copy.d32 = hc->align_buff; ++ } else { ++ st->hcdma_copy.d32 = ((unsigned long) hc->xfer_buff & 0xFFFFFFFF); ++ } ++ } ++ } else { ++ if (hc->align_buff) { ++ st->hcdma_copy.d32 = hc->align_buff; ++ } else { ++ st->hcdma_copy.d32 = ((unsigned long) hc->xfer_buff & 0xFFFFFFFF); ++ } ++ } ++ /* The FIQ depends upon no other interrupts being enabled except channel halt. ++ * Fixup channel interrupt mask. */ ++ st->hcintmsk_copy.d32 = 0; ++ st->hcintmsk_copy.b.chhltd = 1; ++ st->hcintmsk_copy.b.ahberr = 1; ++ ++ /* Hack courtesy of FreeBSD: apparently forcing Interrupt Split transactions ++ * as Control puts the transfer into the non-periodic request queue and the ++ * non-periodic handler in the hub. Makes things lots easier. ++ */ ++ if ((fiq_fsm_mask & 0x8) && hc->ep_type == UE_INTERRUPT) { ++ st->hcchar_copy.b.multicnt = 0; ++ st->hcchar_copy.b.oddfrm = 0; ++ st->hcchar_copy.b.eptype = UE_CONTROL; ++ if (hc->align_buff) { ++ st->hcdma_copy.d32 = hc->align_buff; ++ } else { ++ st->hcdma_copy.d32 = ((unsigned long) hc->xfer_buff & 0xFFFFFFFF); ++ } ++ } ++ DWC_WRITE_REG32(&hc_regs->hcdma, st->hcdma_copy.d32); ++ DWC_WRITE_REG32(&hc_regs->hctsiz, st->hctsiz_copy.d32); ++ DWC_WRITE_REG32(&hc_regs->hcsplt, st->hcsplt_copy.d32); ++ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32); ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, st->hcintmsk_copy.d32); ++ ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&hcd->fiq_state->lock); ++ ++ if (hc->ep_type & 0x1) { ++ hfnum.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum); ++ frame = (hfnum.b.frnum & ~0x7) >> 3; ++ uframe = hfnum.b.frnum & 0x7; ++ if (hfnum.b.frrem < PERIODIC_FRREM_BACKOFF) { ++ /* Prevent queueing near EOF1. Bad things happen if a periodic ++ * split transaction is queued very close to EOF. ++ */ ++ start_immediate = 0; ++ } else if (uframe == 5) { ++ start_immediate = 0; ++ } else if (hc->ep_type == UE_ISOCHRONOUS && !hc->ep_is_in) { ++ start_immediate = 0; ++ } else if (hc->ep_is_in && fiq_fsm_too_late(hcd->fiq_state, hc->hc_num)) { ++ start_immediate = 0; ++ } else { ++ /* Search through all host channels to determine if a transaction ++ * is currently in progress */ ++ for (i = 0; i < hcd->core_if->core_params->host_channels; i++) { ++ if (i == hc->hc_num || hcd->fiq_state->channel[i].fsm == FIQ_PASSTHROUGH) ++ continue; ++ switch (hcd->fiq_state->channel[i].fsm) { ++ /* TT is reserved for channels that are in the middle of a periodic ++ * split transaction. ++ */ ++ case FIQ_PER_SSPLIT_STARTED: ++ case FIQ_PER_CSPLIT_WAIT: ++ case FIQ_PER_CSPLIT_NYET1: ++ case FIQ_PER_CSPLIT_POLL: ++ case FIQ_PER_ISO_OUT_ACTIVE: ++ case FIQ_PER_ISO_OUT_LAST: ++ if (hcd->fiq_state->channel[i].hub_addr == hub_addr && ++ hcd->fiq_state->channel[i].port_addr == port_addr) { ++ start_immediate = 0; ++ } ++ break; ++ default: ++ break; ++ } ++ if (!start_immediate) ++ break; ++ } ++ } ++ } ++ if ((fiq_fsm_mask & 0x8) && hc->ep_type == UE_INTERRUPT) ++ start_immediate = 1; ++ ++ fiq_print(FIQDBG_INT, hcd->fiq_state, "FSMQ %01d %01d", hc->hc_num, start_immediate); ++ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08d", hfnum.b.frrem); ++ //fiq_print(FIQDBG_INT, hcd->fiq_state, "H:%02dP:%02d", hub_addr, port_addr); ++ //fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hctsiz_copy.d32); ++ //fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcdma_copy.d32); ++ switch (hc->ep_type) { ++ case UE_CONTROL: ++ case UE_BULK: ++ st->fsm = FIQ_NP_SSPLIT_STARTED; ++ break; ++ case UE_ISOCHRONOUS: ++ if (hc->ep_is_in) { ++ if (start_immediate) { ++ st->fsm = FIQ_PER_SSPLIT_STARTED; ++ } else { ++ st->fsm = FIQ_PER_SSPLIT_QUEUED; ++ } ++ } else { ++ if (start_immediate) { ++ /* Single-isoc OUT packets don't require FIQ involvement */ ++ if (st->nrpackets == 1) { ++ st->fsm = FIQ_PER_ISO_OUT_LAST; ++ } else { ++ st->fsm = FIQ_PER_ISO_OUT_ACTIVE; ++ } ++ } else { ++ st->fsm = FIQ_PER_ISO_OUT_PENDING; ++ } ++ } ++ break; ++ case UE_INTERRUPT: ++ if (fiq_fsm_mask & 0x8) { ++ st->fsm = FIQ_NP_SSPLIT_STARTED; ++ } else if (start_immediate) { ++ st->fsm = FIQ_PER_SSPLIT_STARTED; ++ } else { ++ st->fsm = FIQ_PER_SSPLIT_QUEUED; ++ } ++ default: ++ break; ++ } ++ if (start_immediate) { ++ /* Set the oddfrm bit as close as possible to actual queueing */ ++ frame = dwc_otg_hcd_get_frame_number(hcd); ++ st->expected_uframe = (frame + 1) & 0x3FFF; ++ st->hcchar_copy.b.oddfrm = (frame & 0x1) ? 0 : 1; ++ st->hcchar_copy.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32); ++ } ++ mb(); ++ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); ++ local_fiq_enable(); ++ return 0; ++} ++ ++ ++/** ++ * This function selects transactions from the HCD transfer schedule and ++ * assigns them to available host channels. It is called from HCD interrupt ++ * handler functions. ++ * ++ * @param hcd The HCD state structure. ++ * ++ * @return The types of new transactions that were assigned to host channels. ++ */ ++dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t * hcd) ++{ ++ dwc_list_link_t *qh_ptr; ++ dwc_otg_qh_t *qh; ++ int num_channels; ++ dwc_irqflags_t flags; ++ dwc_spinlock_t *channel_lock = hcd->channel_lock; ++ dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE; ++ ++#ifdef DEBUG_HOST_CHANNELS ++ last_sel_trans_num_per_scheduled = 0; ++ last_sel_trans_num_nonper_scheduled = 0; ++ last_sel_trans_num_avail_hc_at_start = hcd->available_host_channels; ++#endif /* DEBUG_HOST_CHANNELS */ ++ ++ /* Process entries in the periodic ready list. */ ++ qh_ptr = DWC_LIST_FIRST(&hcd->periodic_sched_ready); ++ ++ while (qh_ptr != &hcd->periodic_sched_ready && ++ !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { ++ ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ ++ if (microframe_schedule) { ++ // Make sure we leave one channel for non periodic transactions. ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ if (hcd->available_host_channels <= 1) { ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ break; ++ } ++ hcd->available_host_channels--; ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++#ifdef DEBUG_HOST_CHANNELS ++ last_sel_trans_num_per_scheduled++; ++#endif /* DEBUG_HOST_CHANNELS */ ++ } ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ assign_and_init_hc(hcd, qh); ++ ++ /* ++ * Move the QH from the periodic ready schedule to the ++ * periodic assigned schedule. ++ */ ++ qh_ptr = DWC_LIST_NEXT(qh_ptr); ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, ++ &qh->qh_list_entry); ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ } ++ ++ /* ++ * Process entries in the inactive portion of the non-periodic ++ * schedule. Some free host channels may not be used if they are ++ * reserved for periodic transfers. ++ */ ++ qh_ptr = hcd->non_periodic_sched_inactive.next; ++ num_channels = hcd->core_if->core_params->host_channels; ++ while (qh_ptr != &hcd->non_periodic_sched_inactive && ++ (microframe_schedule || hcd->non_periodic_channels < ++ num_channels - hcd->periodic_channels) && ++ !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { ++ ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ /* ++ * Check to see if this is a NAK'd retransmit, in which case ignore for retransmission ++ * we hold off on bulk retransmissions to reduce NAK interrupt overhead for full-speed ++ * cheeky devices that just hold off using NAKs ++ */ ++ if (fiq_enable && nak_holdoff && qh->do_split) { ++ if (qh->nak_frame != 0xffff) { ++ uint16_t next_frame = dwc_frame_num_inc(qh->nak_frame, (qh->ep_type == UE_BULK) ? nak_holdoff : 8); ++ uint16_t frame = dwc_otg_hcd_get_frame_number(hcd); ++ if (dwc_frame_num_le(frame, next_frame)) { ++ if(dwc_frame_num_le(next_frame, hcd->fiq_state->next_sched_frame)) { ++ hcd->fiq_state->next_sched_frame = next_frame; ++ } ++ qh_ptr = DWC_LIST_NEXT(qh_ptr); ++ continue; ++ } else { ++ qh->nak_frame = 0xFFFF; ++ } ++ } ++ } ++ ++ if (microframe_schedule) { ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ if (hcd->available_host_channels < 1) { ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ break; ++ } ++ hcd->available_host_channels--; ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++#ifdef DEBUG_HOST_CHANNELS ++ last_sel_trans_num_nonper_scheduled++; ++#endif /* DEBUG_HOST_CHANNELS */ ++ } ++ ++ assign_and_init_hc(hcd, qh); ++ ++ /* ++ * Move the QH from the non-periodic inactive schedule to the ++ * non-periodic active schedule. ++ */ ++ qh_ptr = DWC_LIST_NEXT(qh_ptr); ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ DWC_LIST_MOVE_HEAD(&hcd->non_periodic_sched_active, ++ &qh->qh_list_entry); ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ ++ ++ if (!microframe_schedule) ++ hcd->non_periodic_channels++; ++ } ++ /* we moved a non-periodic QH to the active schedule. If the inactive queue is empty, ++ * stop the FIQ from kicking us. We could potentially still have elements here if we ++ * ran out of host channels. ++ */ ++ if (fiq_enable) { ++ if (DWC_LIST_EMPTY(&hcd->non_periodic_sched_inactive)) { ++ hcd->fiq_state->kick_np_queues = 0; ++ } else { ++ /* For each entry remaining in the NP inactive queue, ++ * if this a NAK'd retransmit then don't set the kick flag. ++ */ ++ if(nak_holdoff) { ++ DWC_LIST_FOREACH(qh_ptr, &hcd->non_periodic_sched_inactive) { ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ if (qh->nak_frame == 0xFFFF) { ++ hcd->fiq_state->kick_np_queues = 1; ++ } ++ } ++ } ++ } ++ } ++ if(!DWC_LIST_EMPTY(&hcd->periodic_sched_assigned)) ++ ret_val |= DWC_OTG_TRANSACTION_PERIODIC; ++ ++ if(!DWC_LIST_EMPTY(&hcd->non_periodic_sched_active)) ++ ret_val |= DWC_OTG_TRANSACTION_NON_PERIODIC; ++ ++ ++#ifdef DEBUG_HOST_CHANNELS ++ last_sel_trans_num_avail_hc_at_end = hcd->available_host_channels; ++#endif /* DEBUG_HOST_CHANNELS */ ++ return ret_val; ++} ++ ++/** ++ * Attempts to queue a single transaction request for a host channel ++ * associated with either a periodic or non-periodic transfer. This function ++ * assumes that there is space available in the appropriate request queue. For ++ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space ++ * is available in the appropriate Tx FIFO. ++ * ++ * @param hcd The HCD state structure. ++ * @param hc Host channel descriptor associated with either a periodic or ++ * non-periodic transfer. ++ * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx ++ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic ++ * transfers. ++ * ++ * @return 1 if a request is queued and more requests may be needed to ++ * complete the transfer, 0 if no more requests are required for this ++ * transfer, -1 if there is insufficient space in the Tx FIFO. ++ */ ++static int queue_transaction(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, uint16_t fifo_dwords_avail) ++{ ++ int retval; ++ ++ if (hcd->core_if->dma_enable) { ++ if (hcd->core_if->dma_desc_enable) { ++ if (!hc->xfer_started ++ || (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) { ++ dwc_otg_hcd_start_xfer_ddma(hcd, hc->qh); ++ hc->qh->ping_state = 0; ++ } ++ } else if (!hc->xfer_started) { ++ if (fiq_fsm_enable && hc->error_state) { ++ hcd->fiq_state->channel[hc->hc_num].nr_errors = ++ DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list)->error_count; ++ hcd->fiq_state->channel[hc->hc_num].fsm = ++ FIQ_PASSTHROUGH_ERRORSTATE; ++ } ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ hc->qh->ping_state = 0; ++ } ++ retval = 0; ++ } else if (hc->halt_pending) { ++ /* Don't queue a request if the channel has been halted. */ ++ retval = 0; ++ } else if (hc->halt_on_queue) { ++ dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status); ++ retval = 0; ++ } else if (hc->do_ping) { ++ if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ } ++ retval = 0; ++ } else if (!hc->ep_is_in || hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { ++ if ((fifo_dwords_avail * 4) >= hc->max_packet) { ++ if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ retval = 1; ++ } else { ++ retval = ++ dwc_otg_hc_continue_transfer(hcd->core_if, ++ hc); ++ } ++ } else { ++ retval = -1; ++ } ++ } else { ++ if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ retval = 1; ++ } else { ++ retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc); ++ } ++ } ++ ++ return retval; ++} ++ ++/** ++ * Processes periodic channels for the next frame and queues transactions for ++ * these channels to the DWC_otg controller. After queueing transactions, the ++ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions ++ * to queue as Periodic Tx FIFO or request queue space becomes available. ++ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. ++ */ ++static void process_periodic_channels(dwc_otg_hcd_t * hcd) ++{ ++ hptxsts_data_t tx_status; ++ dwc_list_link_t *qh_ptr; ++ dwc_otg_qh_t *qh; ++ int status = 0; ++ int no_queue_space = 0; ++ int no_fifo_space = 0; ++ ++ dwc_otg_host_global_regs_t *host_regs; ++ host_regs = hcd->core_if->host_if->host_global_regs; ++ ++ DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n"); ++#ifdef DEBUG ++ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts); ++ DWC_DEBUGPL(DBG_HCDV, ++ " P Tx Req Queue Space Avail (before queue): %d\n", ++ tx_status.b.ptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n", ++ tx_status.b.ptxfspcavail); ++#endif ++ ++ qh_ptr = hcd->periodic_sched_assigned.next; ++ while (qh_ptr != &hcd->periodic_sched_assigned) { ++ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts); ++ if (tx_status.b.ptxqspcavail == 0) { ++ no_queue_space = 1; ++ break; ++ } ++ ++ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ ++ // Do not send a split start transaction any later than frame .6 ++ // Note, we have to schedule a periodic in .5 to make it go in .6 ++ if(fiq_fsm_enable && qh->do_split && ((dwc_otg_hcd_get_frame_number(hcd) + 1) & 7) > 6) ++ { ++ qh_ptr = qh_ptr->next; ++ hcd->fiq_state->next_sched_frame = dwc_otg_hcd_get_frame_number(hcd) | 7; ++ continue; ++ } ++ ++ if (fiq_fsm_enable && fiq_fsm_transaction_suitable(qh)) { ++ if (qh->do_split) ++ fiq_fsm_queue_split_transaction(hcd, qh); ++ else ++ fiq_fsm_queue_isoc_transaction(hcd, qh); ++ } else { ++ ++ /* ++ * Set a flag if we're queueing high-bandwidth in slave mode. ++ * The flag prevents any halts to get into the request queue in ++ * the middle of multiple high-bandwidth packets getting queued. ++ */ ++ if (!hcd->core_if->dma_enable && qh->channel->multi_count > 1) { ++ hcd->core_if->queuing_high_bandwidth = 1; ++ } ++ status = queue_transaction(hcd, qh->channel, ++ tx_status.b.ptxfspcavail); ++ if (status < 0) { ++ no_fifo_space = 1; ++ break; ++ } ++ } ++ ++ /* ++ * In Slave mode, stay on the current transfer until there is ++ * nothing more to do or the high-bandwidth request count is ++ * reached. In DMA mode, only need to queue one request. The ++ * controller automatically handles multiple packets for ++ * high-bandwidth transfers. ++ */ ++ if (hcd->core_if->dma_enable || status == 0 || ++ qh->channel->requests == qh->channel->multi_count) { ++ qh_ptr = qh_ptr->next; ++ /* ++ * Move the QH from the periodic assigned schedule to ++ * the periodic queued schedule. ++ */ ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_queued, ++ &qh->qh_list_entry); ++ ++ /* done queuing high bandwidth */ ++ hcd->core_if->queuing_high_bandwidth = 0; ++ } ++ } ++ ++ if (!hcd->core_if->dma_enable) { ++ dwc_otg_core_global_regs_t *global_regs; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ global_regs = hcd->core_if->core_global_regs; ++ intr_mask.b.ptxfempty = 1; ++#ifdef DEBUG ++ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts); ++ DWC_DEBUGPL(DBG_HCDV, ++ " P Tx Req Queue Space Avail (after queue): %d\n", ++ tx_status.b.ptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, ++ " P Tx FIFO Space Avail (after queue): %d\n", ++ tx_status.b.ptxfspcavail); ++#endif ++ if (!DWC_LIST_EMPTY(&hcd->periodic_sched_assigned) || ++ no_queue_space || no_fifo_space) { ++ /* ++ * May need to queue more transactions as the request ++ * queue or Tx FIFO empties. Enable the periodic Tx ++ * FIFO empty interrupt. (Always use the half-empty ++ * level to ensure that new requests are loaded as ++ * soon as possible.) ++ */ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, ++ intr_mask.d32); ++ } else { ++ /* ++ * Disable the Tx FIFO empty interrupt since there are ++ * no more transactions that need to be queued right ++ * now. This function is called from interrupt ++ * handlers to queue more transactions as transfer ++ * states change. ++ */ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, ++ 0); ++ } ++ } ++} ++ ++/** ++ * Processes active non-periodic channels and queues transactions for these ++ * channels to the DWC_otg controller. After queueing transactions, the NP Tx ++ * FIFO Empty interrupt is enabled if there are more transactions to queue as ++ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx ++ * FIFO Empty interrupt is disabled. ++ */ ++static void process_non_periodic_channels(dwc_otg_hcd_t * hcd) ++{ ++ gnptxsts_data_t tx_status; ++ dwc_list_link_t *orig_qh_ptr; ++ dwc_otg_qh_t *qh; ++ int status; ++ int no_queue_space = 0; ++ int no_fifo_space = 0; ++ int more_to_do = 0; ++ ++ dwc_otg_core_global_regs_t *global_regs = ++ hcd->core_if->core_global_regs; ++ ++ DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n"); ++#ifdef DEBUG ++ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_HCDV, ++ " NP Tx Req Queue Space Avail (before queue): %d\n", ++ tx_status.b.nptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n", ++ tx_status.b.nptxfspcavail); ++#endif ++ /* ++ * Keep track of the starting point. Skip over the start-of-list ++ * entry. ++ */ ++ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { ++ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; ++ } ++ orig_qh_ptr = hcd->non_periodic_qh_ptr; ++ ++ /* ++ * Process once through the active list or until no more space is ++ * available in the request queue or the Tx FIFO. ++ */ ++ do { ++ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) { ++ no_queue_space = 1; ++ break; ++ } ++ ++ qh = DWC_LIST_ENTRY(hcd->non_periodic_qh_ptr, dwc_otg_qh_t, ++ qh_list_entry); ++ ++ if(fiq_fsm_enable && fiq_fsm_transaction_suitable(qh)) { ++ fiq_fsm_queue_split_transaction(hcd, qh); ++ } else { ++ status = queue_transaction(hcd, qh->channel, ++ tx_status.b.nptxfspcavail); ++ ++ if (status > 0) { ++ more_to_do = 1; ++ } else if (status < 0) { ++ no_fifo_space = 1; ++ break; ++ } ++ } ++ /* Advance to next QH, skipping start-of-list entry. */ ++ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; ++ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { ++ hcd->non_periodic_qh_ptr = ++ hcd->non_periodic_qh_ptr->next; ++ } ++ ++ } while (hcd->non_periodic_qh_ptr != orig_qh_ptr); ++ ++ if (!hcd->core_if->dma_enable) { ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ intr_mask.b.nptxfempty = 1; ++ ++#ifdef DEBUG ++ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_HCDV, ++ " NP Tx Req Queue Space Avail (after queue): %d\n", ++ tx_status.b.nptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, ++ " NP Tx FIFO Space Avail (after queue): %d\n", ++ tx_status.b.nptxfspcavail); ++#endif ++ if (more_to_do || no_queue_space || no_fifo_space) { ++ /* ++ * May need to queue more transactions as the request ++ * queue or Tx FIFO empties. Enable the non-periodic ++ * Tx FIFO empty interrupt. (Always use the half-empty ++ * level to ensure that new requests are loaded as ++ * soon as possible.) ++ */ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, ++ intr_mask.d32); ++ } else { ++ /* ++ * Disable the Tx FIFO empty interrupt since there are ++ * no more transactions that need to be queued right ++ * now. This function is called from interrupt ++ * handlers to queue more transactions as transfer ++ * states change. ++ */ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, ++ 0); ++ } ++ } ++} ++ ++/** ++ * This function processes the currently active host channels and queues ++ * transactions for these channels to the DWC_otg controller. It is called ++ * from HCD interrupt handler functions. ++ * ++ * @param hcd The HCD state structure. ++ * @param tr_type The type(s) of transactions to queue (non-periodic, ++ * periodic, or both). ++ */ ++void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd, ++ dwc_otg_transaction_type_e tr_type) ++{ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n"); ++#endif ++ /* Process host channels associated with periodic transfers. */ ++ if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC || ++ tr_type == DWC_OTG_TRANSACTION_ALL) && ++ !DWC_LIST_EMPTY(&hcd->periodic_sched_assigned)) { ++ ++ process_periodic_channels(hcd); ++ } ++ ++ /* Process host channels associated with non-periodic transfers. */ ++ if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC || ++ tr_type == DWC_OTG_TRANSACTION_ALL) { ++ if (!DWC_LIST_EMPTY(&hcd->non_periodic_sched_active)) { ++ process_non_periodic_channels(hcd); ++ } else { ++ /* ++ * Ensure NP Tx FIFO empty interrupt is disabled when ++ * there are no non-periodic transfers to process. ++ */ ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ gintmsk.b.nptxfempty = 1; ++ ++ if (fiq_enable) { ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&hcd->fiq_state->lock); ++ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0); ++ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } else { ++ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0); ++ } ++ } ++ } ++} ++ ++#ifdef DWC_HS_ELECT_TST ++/* ++ * Quick and dirty hack to implement the HS Electrical Test ++ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature. ++ * ++ * This code was copied from our userspace app "hset". It sends a ++ * Get Device Descriptor control sequence in two parts, first the ++ * Setup packet by itself, followed some time later by the In and ++ * Ack packets. Rather than trying to figure out how to add this ++ * functionality to the normal driver code, we just hijack the ++ * hardware, using these two function to drive the hardware ++ * directly. ++ */ ++ ++static dwc_otg_core_global_regs_t *global_regs; ++static dwc_otg_host_global_regs_t *hc_global_regs; ++static dwc_otg_hc_regs_t *hc_regs; ++static uint32_t *data_fifo; ++ ++static void do_setup(void) ++{ ++ gintsts_data_t gintsts; ++ hctsiz_data_t hctsiz; ++ hcchar_data_t hcchar; ++ haint_data_t haint; ++ hcint_data_t hcint; ++ ++ /* Enable HAINTs */ ++ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001); ++ ++ /* Enable HCINTs */ ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* ++ * Send Setup packet (Get Device Descriptor) ++ */ ++ ++ /* Make sure channel is disabled */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ hcchar.b.chdis = 1; ++// hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ //sleep(1); ++ dwc_mdelay(1000); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ } ++ ++ /* Set HCTSIZ */ ++ hctsiz.d32 = 0; ++ hctsiz.b.xfersize = 8; ++ hctsiz.b.pktcnt = 1; ++ hctsiz.b.pid = DWC_OTG_HC_PID_SETUP; ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ /* Set HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.epdir = 0; ++ hcchar.b.epnum = 0; ++ hcchar.b.mps = 8; ++ hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ /* Fill FIFO with Setup data for Get Device Descriptor */ ++ data_fifo = (uint32_t *) ((char *)global_regs + 0x1000); ++ DWC_WRITE_REG32(data_fifo++, 0x01000680); ++ DWC_WRITE_REG32(data_fifo++, 0x00080000); ++ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Wait for host channel interrupt */ ++ do { ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ } while (gintsts.b.hcintr == 0); ++ ++ /* Disable HCINTs */ ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000); ++ ++ /* Disable HAINTs */ ++ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++} ++ ++static void do_in_ack(void) ++{ ++ gintsts_data_t gintsts; ++ hctsiz_data_t hctsiz; ++ hcchar_data_t hcchar; ++ haint_data_t haint; ++ hcint_data_t hcint; ++ host_grxsts_data_t grxsts; ++ ++ /* Enable HAINTs */ ++ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001); ++ ++ /* Enable HCINTs */ ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* ++ * Receive Control In packet ++ */ ++ ++ /* Make sure channel is disabled */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ hcchar.b.chdis = 1; ++ hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ //sleep(1); ++ dwc_mdelay(1000); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ } ++ ++ /* Set HCTSIZ */ ++ hctsiz.d32 = 0; ++ hctsiz.b.xfersize = 8; ++ hctsiz.b.pktcnt = 1; ++ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ /* Set HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.epdir = 1; ++ hcchar.b.epnum = 0; ++ hcchar.b.mps = 8; ++ hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Wait for receive status queue interrupt */ ++ do { ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ } while (gintsts.b.rxstsqlvl == 0); ++ ++ /* Read RXSTS */ ++ grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp); ++ ++ /* Clear RXSTSQLVL in GINTSTS */ ++ gintsts.d32 = 0; ++ gintsts.b.rxstsqlvl = 1; ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ switch (grxsts.b.pktsts) { ++ case DWC_GRXSTS_PKTSTS_IN: ++ /* Read the data into the host buffer */ ++ if (grxsts.b.bcnt > 0) { ++ int i; ++ int word_count = (grxsts.b.bcnt + 3) / 4; ++ ++ data_fifo = (uint32_t *) ((char *)global_regs + 0x1000); ++ ++ for (i = 0; i < word_count; i++) { ++ (void)DWC_READ_REG32(data_fifo++); ++ } ++ } ++ break; ++ ++ default: ++ break; ++ } ++ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Wait for receive status queue interrupt */ ++ do { ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ } while (gintsts.b.rxstsqlvl == 0); ++ ++ /* Read RXSTS */ ++ grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp); ++ ++ /* Clear RXSTSQLVL in GINTSTS */ ++ gintsts.d32 = 0; ++ gintsts.b.rxstsqlvl = 1; ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ switch (grxsts.b.pktsts) { ++ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: ++ break; ++ ++ default: ++ break; ++ } ++ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Wait for host channel interrupt */ ++ do { ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ } while (gintsts.b.hcintr == 0); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++// usleep(100000); ++// mdelay(100); ++ dwc_mdelay(1); ++ ++ /* ++ * Send handshake packet ++ */ ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Make sure channel is disabled */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ hcchar.b.chdis = 1; ++ hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ //sleep(1); ++ dwc_mdelay(1000); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ } ++ ++ /* Set HCTSIZ */ ++ hctsiz.d32 = 0; ++ hctsiz.b.xfersize = 0; ++ hctsiz.b.pktcnt = 1; ++ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; ++ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ /* Set HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.epdir = 0; ++ hcchar.b.epnum = 0; ++ hcchar.b.mps = 8; ++ hcchar.b.chen = 1; ++ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); ++ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ ++ /* Wait for host channel interrupt */ ++ do { ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++ } while (gintsts.b.hcintr == 0); ++ ++ /* Disable HCINTs */ ++ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000); ++ ++ /* Disable HAINTs */ ++ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000); ++ ++ /* Read HAINT */ ++ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); ++ ++ /* Read HCINT */ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ ++ /* Clear HCINT */ ++ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); ++} ++#endif ++ ++/** Handles hub class-specific requests. */ ++int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd, ++ uint16_t typeReq, ++ uint16_t wValue, ++ uint16_t wIndex, uint8_t * buf, uint16_t wLength) ++{ ++ int retval = 0; ++ ++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; ++ usb_hub_descriptor_t *hub_desc; ++ hprt0_data_t hprt0 = {.d32 = 0 }; ++ ++ uint32_t port_status; ++ ++ switch (typeReq) { ++ case UCR_CLEAR_HUB_FEATURE: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearHubFeature 0x%x\n", wValue); ++ switch (wValue) { ++ case UHF_C_HUB_LOCAL_POWER: ++ case UHF_C_HUB_OVER_CURRENT: ++ /* Nothing required here */ ++ break; ++ default: ++ retval = -DWC_E_INVALID; ++ DWC_ERROR("DWC OTG HCD - " ++ "ClearHubFeature request %xh unknown\n", ++ wValue); ++ } ++ break; ++ case UCR_CLEAR_PORT_FEATURE: ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (wValue != UHF_PORT_L1) ++#endif ++ if (!wIndex || wIndex > 1) ++ goto error; ++ ++ switch (wValue) { ++ case UHF_PORT_ENABLE: ++ DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtena = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++ case UHF_PORT_SUSPEND: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); ++ ++ if (core_if->power_down == 2) { ++ dwc_otg_host_hibernation_restore(core_if, 0, 0); ++ } else { ++ DWC_WRITE_REG32(core_if->pcgcctl, 0); ++ dwc_mdelay(5); ++ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtres = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ hprt0.b.prtsusp = 0; ++ /* Clear Resume bit */ ++ dwc_mdelay(100); ++ hprt0.b.prtres = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ } ++ break; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ case UHF_PORT_L1: ++ { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ glpmcfg_data_t lpmcfg = {.d32 = 0 }; ++ ++ lpmcfg.d32 = ++ DWC_READ_REG32(&core_if-> ++ core_global_regs->glpmcfg); ++ lpmcfg.b.en_utmi_sleep = 0; ++ lpmcfg.b.hird_thres &= (~(1 << 4)); ++ lpmcfg.b.prt_sleep_sts = 1; ++ DWC_WRITE_REG32(&core_if-> ++ core_global_regs->glpmcfg, ++ lpmcfg.d32); ++ ++ /* Clear Enbl_L1Gating bit. */ ++ pcgcctl.b.enbl_sleep_gating = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, ++ 0); ++ ++ dwc_mdelay(5); ++ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtres = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, ++ hprt0.d32); ++ /* This bit will be cleared in wakeup interrupt handle */ ++ break; ++ } ++#endif ++ case UHF_PORT_POWER: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_POWER\n"); ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++ case UHF_PORT_INDICATOR: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); ++ /* Port inidicator not supported */ ++ break; ++ case UHF_C_PORT_CONNECTION: ++ /* Clears drivers internal connect status change ++ * flag */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); ++ dwc_otg_hcd->flags.b.port_connect_status_change = 0; ++ break; ++ case UHF_C_PORT_RESET: ++ /* Clears the driver's internal Port Reset Change ++ * flag */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); ++ dwc_otg_hcd->flags.b.port_reset_change = 0; ++ break; ++ case UHF_C_PORT_ENABLE: ++ /* Clears the driver's internal Port ++ * Enable/Disable Change flag */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); ++ dwc_otg_hcd->flags.b.port_enable_change = 0; ++ break; ++ case UHF_C_PORT_SUSPEND: ++ /* Clears the driver's internal Port Suspend ++ * Change flag, which is set when resume signaling on ++ * the host port is complete */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); ++ dwc_otg_hcd->flags.b.port_suspend_change = 0; ++ break; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ case UHF_C_PORT_L1: ++ dwc_otg_hcd->flags.b.port_l1_change = 0; ++ break; ++#endif ++ case UHF_C_PORT_OVER_CURRENT: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); ++ dwc_otg_hcd->flags.b.port_over_current_change = 0; ++ break; ++ default: ++ retval = -DWC_E_INVALID; ++ DWC_ERROR("DWC OTG HCD - " ++ "ClearPortFeature request %xh " ++ "unknown or unsupported\n", wValue); ++ } ++ break; ++ case UCR_GET_HUB_DESCRIPTOR: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "GetHubDescriptor\n"); ++ hub_desc = (usb_hub_descriptor_t *) buf; ++ hub_desc->bDescLength = 9; ++ hub_desc->bDescriptorType = 0x29; ++ hub_desc->bNbrPorts = 1; ++ USETW(hub_desc->wHubCharacteristics, 0x08); ++ hub_desc->bPwrOn2PwrGood = 1; ++ hub_desc->bHubContrCurrent = 0; ++ hub_desc->DeviceRemovable[0] = 0; ++ hub_desc->DeviceRemovable[1] = 0xff; ++ break; ++ case UCR_GET_HUB_STATUS: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "GetHubStatus\n"); ++ DWC_MEMSET(buf, 0, 4); ++ break; ++ case UCR_GET_PORT_STATUS: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "GetPortStatus wIndex = 0x%04x FLAGS=0x%08x\n", ++ wIndex, dwc_otg_hcd->flags.d32); ++ if (!wIndex || wIndex > 1) ++ goto error; ++ ++ port_status = 0; ++ ++ if (dwc_otg_hcd->flags.b.port_connect_status_change) ++ port_status |= (1 << UHF_C_PORT_CONNECTION); ++ ++ if (dwc_otg_hcd->flags.b.port_enable_change) ++ port_status |= (1 << UHF_C_PORT_ENABLE); ++ ++ if (dwc_otg_hcd->flags.b.port_suspend_change) ++ port_status |= (1 << UHF_C_PORT_SUSPEND); ++ ++ if (dwc_otg_hcd->flags.b.port_l1_change) ++ port_status |= (1 << UHF_C_PORT_L1); ++ ++ if (dwc_otg_hcd->flags.b.port_reset_change) { ++ port_status |= (1 << UHF_C_PORT_RESET); ++ } ++ ++ if (dwc_otg_hcd->flags.b.port_over_current_change) { ++ DWC_WARN("Overcurrent change detected\n"); ++ port_status |= (1 << UHF_C_PORT_OVER_CURRENT); ++ } ++ ++ if (!dwc_otg_hcd->flags.b.port_connect_status) { ++ /* ++ * The port is disconnected, which means the core is ++ * either in device mode or it soon will be. Just ++ * return 0's for the remainder of the port status ++ * since the port register can't be read if the core ++ * is in device mode. ++ */ ++ *((__le32 *) buf) = dwc_cpu_to_le32(&port_status); ++ break; ++ } ++ ++ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); ++ DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32); ++ ++ if (hprt0.b.prtconnsts) ++ port_status |= (1 << UHF_PORT_CONNECTION); ++ ++ if (hprt0.b.prtena) ++ port_status |= (1 << UHF_PORT_ENABLE); ++ ++ if (hprt0.b.prtsusp) ++ port_status |= (1 << UHF_PORT_SUSPEND); ++ ++ if (hprt0.b.prtovrcurract) ++ port_status |= (1 << UHF_PORT_OVER_CURRENT); ++ ++ if (hprt0.b.prtrst) ++ port_status |= (1 << UHF_PORT_RESET); ++ ++ if (hprt0.b.prtpwr) ++ port_status |= (1 << UHF_PORT_POWER); ++ ++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) ++ port_status |= (1 << UHF_PORT_HIGH_SPEED); ++ else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) ++ port_status |= (1 << UHF_PORT_LOW_SPEED); ++ ++ if (hprt0.b.prttstctl) ++ port_status |= (1 << UHF_PORT_TEST); ++ if (dwc_otg_get_lpm_portsleepstatus(dwc_otg_hcd->core_if)) { ++ port_status |= (1 << UHF_PORT_L1); ++ } ++ /* ++ For Synopsys HW emulation of Power down wkup_control asserts the ++ hreset_n and prst_n on suspned. This causes the HPRT0 to be zero. ++ We intentionally tell the software that port is in L2Suspend state. ++ Only for STE. ++ */ ++ if ((core_if->power_down == 2) ++ && (core_if->hibernation_suspend == 1)) { ++ port_status |= (1 << UHF_PORT_SUSPEND); ++ } ++ /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ ++ ++ *((__le32 *) buf) = dwc_cpu_to_le32(&port_status); ++ ++ break; ++ case UCR_SET_HUB_FEATURE: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetHubFeature\n"); ++ /* No HUB features supported */ ++ break; ++ case UCR_SET_PORT_FEATURE: ++ if (wValue != UHF_PORT_TEST && (!wIndex || wIndex > 1)) ++ goto error; ++ ++ if (!dwc_otg_hcd->flags.b.port_connect_status) { ++ /* ++ * The port is disconnected, which means the core is ++ * either in device mode or it soon will be. Just ++ * return without doing anything since the port ++ * register can't be written if the core is in device ++ * mode. ++ */ ++ break; ++ } ++ ++ switch (wValue) { ++ case UHF_PORT_SUSPEND: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); ++ if (dwc_otg_hcd_otg_port(dwc_otg_hcd) != wIndex) { ++ goto error; ++ } ++ if (core_if->power_down == 2) { ++ int timeout = 300; ++ dwc_irqflags_t flags; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ gusbcfg_data_t gusbcfg = {.d32 = 0 }; ++#ifdef DWC_DEV_SRPCAP ++ int32_t otg_cap_param = core_if->core_params->otg_cap; ++#endif ++ DWC_PRINTF("Preparing for complete power-off\n"); ++ ++ /* Save registers before hibernation */ ++ dwc_otg_save_global_regs(core_if); ++ dwc_otg_save_host_regs(core_if); ++ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 1; ++ hprt0.b.prtena = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ /* Spin hprt0.b.prtsusp to became 1 */ ++ do { ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ if (hprt0.b.prtsusp) { ++ break; ++ } ++ dwc_mdelay(1); ++ } while (--timeout); ++ if (!timeout) { ++ DWC_WARN("Suspend wasn't genereted\n"); ++ } ++ dwc_udelay(10); ++ ++ /* ++ * We need to disable interrupts to prevent servicing of any IRQ ++ * during going to hibernation ++ */ ++ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); ++ core_if->lx_state = DWC_OTG_L2; ++#ifdef DWC_DEV_SRPCAP ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 0; ++ hprt0.b.prtena = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, ++ hprt0.d32); ++#endif ++ gusbcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs-> ++ gusbcfg); ++ if (gusbcfg.b.ulpi_utmi_sel == 1) { ++ /* ULPI interface */ ++ /* Suspend the Phy Clock */ ++ pcgcctl.d32 = 0; ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, ++ pcgcctl.d32); ++ dwc_udelay(10); ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ } else { ++ /* UTMI+ Interface */ ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); ++ dwc_udelay(10); ++ } ++#ifdef DWC_DEV_SRPCAP ++ gpwrdn.d32 = 0; ++ gpwrdn.b.dis_vbus = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++#endif ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ gpwrdn.d32 = 0; ++#ifdef DWC_DEV_SRPCAP ++ gpwrdn.b.srp_det_msk = 1; ++#endif ++ gpwrdn.b.disconn_det_msk = 1; ++ gpwrdn.b.lnstchng_msk = 1; ++ gpwrdn.b.sts_chngint_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Enable Power Down Clamp and all interrupts in GPWRDN */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnclmp = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ dwc_udelay(10); ++ ++ /* Switch off VDD */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ ++#ifdef DWC_DEV_SRPCAP ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) ++ { ++ core_if->pwron_timer_started = 1; ++ DWC_TIMER_SCHEDULE(core_if->pwron_timer, 6000 /* 6 secs */ ); ++ } ++#endif ++ /* Save gpwrdn register for further usage if stschng interrupt */ ++ core_if->gr_backup->gpwrdn_local = ++ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); ++ ++ /* Set flag to indicate that we are in hibernation */ ++ core_if->hibernation_suspend = 1; ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock,flags); ++ ++ DWC_PRINTF("Host hibernation completed\n"); ++ // Exit from case statement ++ break; ++ ++ } ++ if (dwc_otg_hcd_otg_port(dwc_otg_hcd) == wIndex && ++ dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) { ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ gotgctl.b.hstsethnpen = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gotgctl, 0, gotgctl.d32); ++ core_if->op_state = A_SUSPEND; ++ } ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ { ++ dwc_irqflags_t flags; ++ /* Update lx_state */ ++ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); ++ core_if->lx_state = DWC_OTG_L2; ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); ++ } ++ /* Suspend the Phy Clock */ ++ { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, 0, ++ pcgcctl.d32); ++ dwc_udelay(10); ++ } ++ ++ /* For HNP the bus must be suspended for at least 200ms. */ ++ if (dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ dwc_mdelay(200); ++ } ++ ++ /** @todo - check how sw can wait for 1 sec to check asesvld??? */ ++#if 0 //vahrama !!!!!!!!!!!!!!!!!! ++ if (core_if->adp_enable) { ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ gpwrdn_data_t gpwrdn; ++ ++ while (gotgctl.b.asesvld == 1) { ++ gotgctl.d32 = ++ DWC_READ_REG32(&core_if-> ++ core_global_regs-> ++ gotgctl); ++ dwc_mdelay(100); ++ } ++ ++ /* Enable Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ ++ /* Unmask SRP detected interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.srp_det_msk = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs-> ++ gpwrdn, 0, gpwrdn.d32); ++ ++ dwc_otg_adp_probe_start(core_if); ++ } ++#endif ++ break; ++ case UHF_PORT_POWER: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_POWER\n"); ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++ case UHF_PORT_RESET: ++ if ((core_if->power_down == 2) ++ && (core_if->hibernation_suspend == 1)) { ++ /* If we are going to exit from Hibernated ++ * state via USB RESET. ++ */ ++ dwc_otg_host_hibernation_restore(core_if, 0, 1); ++ } else { ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ ++ DWC_DEBUGPL(DBG_HCD, ++ "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_RESET\n"); ++ { ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ pcgcctl.b.enbl_sleep_gating = 1; ++ pcgcctl.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); ++ DWC_WRITE_REG32(core_if->pcgcctl, 0); ++ } ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ { ++ glpmcfg_data_t lpmcfg; ++ lpmcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ if (lpmcfg.b.prt_sleep_sts) { ++ lpmcfg.b.en_utmi_sleep = 0; ++ lpmcfg.b.hird_thres &= (~(1 << 4)); ++ DWC_WRITE_REG32 ++ (&core_if->core_global_regs->glpmcfg, ++ lpmcfg.d32); ++ dwc_mdelay(1); ++ } ++ } ++#endif ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ /* Clear suspend bit if resetting from suspended state. */ ++ hprt0.b.prtsusp = 0; ++ /* When B-Host the Port reset bit is set in ++ * the Start HCD Callback function, so that ++ * the reset is started within 1ms of the HNP ++ * success interrupt. */ ++ if (!dwc_otg_hcd_is_b_host(dwc_otg_hcd)) { ++ hprt0.b.prtpwr = 1; ++ hprt0.b.prtrst = 1; ++ DWC_PRINTF("Indeed it is in host mode hprt0 = %08x\n",hprt0.d32); ++ DWC_WRITE_REG32(core_if->host_if->hprt0, ++ hprt0.d32); ++ } ++ /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ ++ dwc_mdelay(60); ++ hprt0.b.prtrst = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ core_if->lx_state = DWC_OTG_L0; /* Now back to the on state */ ++ } ++ break; ++#ifdef DWC_HS_ELECT_TST ++ case UHF_PORT_TEST: ++ { ++ uint32_t t; ++ gintmsk_data_t gintmsk; ++ ++ t = (wIndex >> 8); /* MSB wIndex USB */ ++ DWC_DEBUGPL(DBG_HCD, ++ "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_TEST %d\n", ++ t); ++ DWC_WARN("USB_PORT_FEAT_TEST %d\n", t); ++ if (t < 6) { ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prttstctl = t; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, ++ hprt0.d32); ++ } else { ++ /* Setup global vars with reg addresses (quick and ++ * dirty hack, should be cleaned up) ++ */ ++ global_regs = core_if->core_global_regs; ++ hc_global_regs = ++ core_if->host_if->host_global_regs; ++ hc_regs = ++ (dwc_otg_hc_regs_t *) ((char *) ++ global_regs + ++ 0x500); ++ data_fifo = ++ (uint32_t *) ((char *)global_regs + ++ 0x1000); ++ ++ if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */ ++ /* Save current interrupt mask */ ++ gintmsk.d32 = ++ DWC_READ_REG32 ++ (&global_regs->gintmsk); ++ ++ /* Disable all interrupts while we muck with ++ * the hardware directly ++ */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, 0); ++ ++ /* 15 second delay per the test spec */ ++ dwc_mdelay(15000); ++ ++ /* Drive suspend on the root port */ ++ hprt0.d32 = ++ dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 1; ++ hprt0.b.prtres = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* 15 second delay per the test spec */ ++ dwc_mdelay(15000); ++ ++ /* Drive resume on the root port */ ++ hprt0.d32 = ++ dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 0; ++ hprt0.b.prtres = 1; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ dwc_mdelay(100); ++ ++ /* Clear the resume bit */ ++ hprt0.b.prtres = 0; ++ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* Restore interrupts */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32); ++ } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ ++ /* Save current interrupt mask */ ++ gintmsk.d32 = ++ DWC_READ_REG32 ++ (&global_regs->gintmsk); ++ ++ /* Disable all interrupts while we muck with ++ * the hardware directly ++ */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, 0); ++ ++ /* 15 second delay per the test spec */ ++ dwc_mdelay(15000); ++ ++ /* Send the Setup packet */ ++ do_setup(); ++ ++ /* 15 second delay so nothing else happens for awhile */ ++ dwc_mdelay(15000); ++ ++ /* Restore interrupts */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32); ++ } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ ++ /* Save current interrupt mask */ ++ gintmsk.d32 = ++ DWC_READ_REG32 ++ (&global_regs->gintmsk); ++ ++ /* Disable all interrupts while we muck with ++ * the hardware directly ++ */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, 0); ++ ++ /* Send the Setup packet */ ++ do_setup(); ++ ++ /* 15 second delay so nothing else happens for awhile */ ++ dwc_mdelay(15000); ++ ++ /* Send the In and Ack packets */ ++ do_in_ack(); ++ ++ /* 15 second delay so nothing else happens for awhile */ ++ dwc_mdelay(15000); ++ ++ /* Restore interrupts */ ++ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32); ++ } ++ } ++ break; ++ } ++#endif /* DWC_HS_ELECT_TST */ ++ ++ case UHF_PORT_INDICATOR: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); ++ /* Not supported */ ++ break; ++ default: ++ retval = -DWC_E_INVALID; ++ DWC_ERROR("DWC OTG HCD - " ++ "SetPortFeature request %xh " ++ "unknown or unsupported\n", wValue); ++ break; ++ } ++ break; ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ case UCR_SET_AND_TEST_PORT_FEATURE: ++ if (wValue != UHF_PORT_L1) { ++ goto error; ++ } ++ { ++ int portnum, hird, devaddr, remwake; ++ glpmcfg_data_t lpmcfg; ++ uint32_t time_usecs; ++ gintsts_data_t gintsts; ++ gintmsk_data_t gintmsk; ++ ++ if (!dwc_otg_get_param_lpm_enable(core_if)) { ++ goto error; ++ } ++ if (wValue != UHF_PORT_L1 || wLength != 1) { ++ goto error; ++ } ++ /* Check if the port currently is in SLEEP state */ ++ lpmcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ if (lpmcfg.b.prt_sleep_sts) { ++ DWC_INFO("Port is already in sleep mode\n"); ++ buf[0] = 0; /* Return success */ ++ break; ++ } ++ ++ portnum = wIndex & 0xf; ++ hird = (wIndex >> 4) & 0xf; ++ devaddr = (wIndex >> 8) & 0x7f; ++ remwake = (wIndex >> 15); ++ ++ if (portnum != 1) { ++ retval = -DWC_E_INVALID; ++ DWC_WARN ++ ("Wrong port number(%d) in SetandTestPortFeature request\n", ++ portnum); ++ break; ++ } ++ ++ DWC_PRINTF ++ ("SetandTestPortFeature request: portnum = %d, hird = %d, devaddr = %d, rewake = %d\n", ++ portnum, hird, devaddr, remwake); ++ /* Disable LPM interrupt */ ++ gintmsk.d32 = 0; ++ gintmsk.b.lpmtranrcvd = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, ++ gintmsk.d32, 0); ++ ++ if (dwc_otg_hcd_send_lpm ++ (dwc_otg_hcd, devaddr, hird, remwake)) { ++ retval = -DWC_E_INVALID; ++ break; ++ } ++ ++ time_usecs = 10 * (lpmcfg.b.retry_count + 1); ++ /* We will consider timeout if time_usecs microseconds pass, ++ * and we don't receive LPM transaction status. ++ * After receiving non-error responce(ACK/NYET/STALL) from device, ++ * core will set lpmtranrcvd bit. ++ */ ++ do { ++ gintsts.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ if (gintsts.b.lpmtranrcvd) { ++ break; ++ } ++ dwc_udelay(1); ++ } while (--time_usecs); ++ /* lpm_int bit will be cleared in LPM interrupt handler */ ++ ++ /* Now fill status ++ * 0x00 - Success ++ * 0x10 - NYET ++ * 0x11 - Timeout ++ */ ++ if (!gintsts.b.lpmtranrcvd) { ++ buf[0] = 0x3; /* Completion code is Timeout */ ++ dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd); ++ } else { ++ lpmcfg.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ if (lpmcfg.b.lpm_resp == 0x3) { ++ /* ACK responce from the device */ ++ buf[0] = 0x00; /* Success */ ++ } else if (lpmcfg.b.lpm_resp == 0x2) { ++ /* NYET responce from the device */ ++ buf[0] = 0x2; ++ } else { ++ /* Otherwise responce with Timeout */ ++ buf[0] = 0x3; ++ } ++ } ++ DWC_PRINTF("Device responce to LPM trans is %x\n", ++ lpmcfg.b.lpm_resp); ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, ++ gintmsk.d32); ++ ++ break; ++ } ++#endif /* CONFIG_USB_DWC_OTG_LPM */ ++ default: ++error: ++ retval = -DWC_E_INVALID; ++ DWC_WARN("DWC OTG HCD - " ++ "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n", ++ typeReq, wIndex, wValue); ++ break; ++ } ++ ++ return retval; ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** Returns index of host channel to perform LPM transaction. */ ++int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd, uint8_t devaddr) ++{ ++ dwc_otg_core_if_t *core_if = hcd->core_if; ++ dwc_hc_t *hc; ++ hcchar_data_t hcchar; ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ ++ if (DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { ++ DWC_PRINTF("No free channel to select for LPM transaction\n"); ++ return -1; ++ } ++ ++ hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list); ++ ++ /* Mask host channel interrupts. */ ++ gintmsk.b.hcintr = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0); ++ ++ /* Fill fields that core needs for LPM transaction */ ++ hcchar.b.devaddr = devaddr; ++ hcchar.b.epnum = 0; ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.mps = 64; ++ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW); ++ hcchar.b.epdir = 0; /* OUT */ ++ DWC_WRITE_REG32(&core_if->host_if->hc_regs[hc->hc_num]->hcchar, ++ hcchar.d32); ++ ++ /* Remove the host channel from the free list. */ ++ DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry); ++ ++ DWC_PRINTF("hcnum = %d devaddr = %d\n", hc->hc_num, devaddr); ++ ++ return hc->hc_num; ++} ++ ++/** Release hc after performing LPM transaction */ ++void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd) ++{ ++ dwc_hc_t *hc; ++ glpmcfg_data_t lpmcfg; ++ uint8_t hc_num; ++ ++ lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg); ++ hc_num = lpmcfg.b.lpm_chan_index; ++ ++ hc = hcd->hc_ptr_array[hc_num]; ++ ++ DWC_PRINTF("Freeing channel %d after LPM\n", hc_num); ++ /* Return host channel to free list */ ++ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); ++} ++ ++int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr, uint8_t hird, ++ uint8_t bRemoteWake) ++{ ++ glpmcfg_data_t lpmcfg; ++ pcgcctl_data_t pcgcctl = {.d32 = 0 }; ++ int channel; ++ ++ channel = dwc_otg_hcd_get_hc_for_lpm_tran(hcd, devaddr); ++ if (channel < 0) { ++ return channel; ++ } ++ ++ pcgcctl.b.enbl_sleep_gating = 1; ++ DWC_MODIFY_REG32(hcd->core_if->pcgcctl, 0, pcgcctl.d32); ++ ++ /* Read LPM config register */ ++ lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg); ++ ++ /* Program LPM transaction fields */ ++ lpmcfg.b.rem_wkup_en = bRemoteWake; ++ lpmcfg.b.hird = hird; ++ lpmcfg.b.hird_thres = 0x1c; ++ lpmcfg.b.lpm_chan_index = channel; ++ lpmcfg.b.en_utmi_sleep = 1; ++ /* Program LPM config register */ ++ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++ ++ /* Send LPM transaction */ ++ lpmcfg.b.send_lpm = 1; ++ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++ ++ return 0; ++} ++ ++#endif /* CONFIG_USB_DWC_OTG_LPM */ ++ ++int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port) ++{ ++ int retval; ++ ++ if (port != 1) { ++ return -DWC_E_INVALID; ++ } ++ ++ retval = (hcd->flags.b.port_connect_status_change || ++ hcd->flags.b.port_reset_change || ++ hcd->flags.b.port_enable_change || ++ hcd->flags.b.port_suspend_change || ++ hcd->flags.b.port_over_current_change); ++#ifdef DEBUG ++ if (retval) { ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:" ++ " Root port status changed\n"); ++ DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n", ++ hcd->flags.b.port_connect_status_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n", ++ hcd->flags.b.port_reset_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n", ++ hcd->flags.b.port_enable_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n", ++ hcd->flags.b.port_suspend_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n", ++ hcd->flags.b.port_over_current_change); ++ } ++#endif ++ return retval; ++} ++ ++int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ hfnum_data_t hfnum; ++ hfnum.d32 = ++ DWC_READ_REG32(&dwc_otg_hcd->core_if->host_if->host_global_regs-> ++ hfnum); ++ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", ++ hfnum.b.frnum); ++#endif ++ return hfnum.b.frnum; ++} ++ ++int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd, ++ struct dwc_otg_hcd_function_ops *fops) ++{ ++ int retval = 0; ++ ++ hcd->fops = fops; ++ if (!dwc_otg_is_device_mode(hcd->core_if) && ++ (!hcd->core_if->adp_enable || hcd->core_if->adp.adp_started)) { ++ dwc_otg_hcd_reinit(hcd); ++ } else { ++ retval = -DWC_E_NO_DEVICE; ++ } ++ ++ return retval; ++} ++ ++void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd) ++{ ++ return hcd->priv; ++} ++ ++void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data) ++{ ++ hcd->priv = priv_data; ++} ++ ++uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd) ++{ ++ return hcd->otg_port; ++} ++ ++uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd) ++{ ++ uint32_t is_b_host; ++ if (hcd->core_if->op_state == B_HOST) { ++ is_b_host = 1; ++ } else { ++ is_b_host = 0; ++ } ++ ++ return is_b_host; ++} ++ ++dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd, ++ int iso_desc_count, int atomic_alloc) ++{ ++ dwc_otg_hcd_urb_t *dwc_otg_urb; ++ uint32_t size; ++ ++ size = ++ sizeof(*dwc_otg_urb) + ++ iso_desc_count * sizeof(struct dwc_otg_hcd_iso_packet_desc); ++ if (atomic_alloc) ++ dwc_otg_urb = DWC_ALLOC_ATOMIC(size); ++ else ++ dwc_otg_urb = DWC_ALLOC(size); ++ ++ if (dwc_otg_urb) ++ dwc_otg_urb->packet_count = iso_desc_count; ++ else { ++ DWC_ERROR("**** DWC OTG HCD URB alloc - " ++ "%salloc of %db failed\n", ++ atomic_alloc?"atomic ":"", size); ++ } ++ return dwc_otg_urb; ++} ++ ++void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ uint8_t dev_addr, uint8_t ep_num, ++ uint8_t ep_type, uint8_t ep_dir, uint16_t mps) ++{ ++ dwc_otg_hcd_fill_pipe(&dwc_otg_urb->pipe_info, dev_addr, ep_num, ++ ep_type, ep_dir, mps); ++#if 0 ++ DWC_PRINTF ++ ("addr = %d, ep_num = %d, ep_dir = 0x%x, ep_type = 0x%x, mps = %d\n", ++ dev_addr, ep_num, ep_dir, ep_type, mps); ++#endif ++} ++ ++void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ void *urb_handle, void *buf, dwc_dma_t dma, ++ uint32_t buflen, void *setup_packet, ++ dwc_dma_t setup_dma, uint32_t flags, ++ uint16_t interval) ++{ ++ dwc_otg_urb->priv = urb_handle; ++ dwc_otg_urb->buf = buf; ++ dwc_otg_urb->dma = dma; ++ dwc_otg_urb->length = buflen; ++ dwc_otg_urb->setup_packet = setup_packet; ++ dwc_otg_urb->setup_dma = setup_dma; ++ dwc_otg_urb->flags = flags; ++ dwc_otg_urb->interval = interval; ++ dwc_otg_urb->status = -DWC_E_IN_PROGRESS; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb) ++{ ++ return dwc_otg_urb->status; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t * dwc_otg_urb) ++{ ++ return dwc_otg_urb->actual_length; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t * dwc_otg_urb) ++{ ++ return dwc_otg_urb->error_count; ++} ++ ++void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ int desc_num, uint32_t offset, ++ uint32_t length) ++{ ++ dwc_otg_urb->iso_descs[desc_num].offset = offset; ++ dwc_otg_urb->iso_descs[desc_num].length = length; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ int desc_num) ++{ ++ return dwc_otg_urb->iso_descs[desc_num].status; ++} ++ ++uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t * ++ dwc_otg_urb, int desc_num) ++{ ++ return dwc_otg_urb->iso_descs[desc_num].actual_length; ++} ++ ++int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd, void *ep_handle) ++{ ++ int allocated = 0; ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ ++ if (qh) { ++ if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) { ++ allocated = 1; ++ } ++ } ++ return allocated; ++} ++ ++int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle) ++{ ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ int freed = 0; ++ DWC_ASSERT(qh, "qh is not allocated\n"); ++ ++ if (DWC_LIST_EMPTY(&qh->qh_list_entry)) { ++ freed = 1; ++ } ++ ++ return freed; ++} ++ ++uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd, void *ep_handle) ++{ ++ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; ++ DWC_ASSERT(qh, "qh is not allocated\n"); ++ return qh->usecs; ++} ++ ++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd) ++{ ++#ifdef DEBUG ++ int num_channels; ++ int i; ++ gnptxsts_data_t np_tx_status; ++ hptxsts_data_t p_tx_status; ++ ++ num_channels = hcd->core_if->core_params->host_channels; ++ DWC_PRINTF("\n"); ++ DWC_PRINTF ++ ("************************************************************\n"); ++ DWC_PRINTF("HCD State:\n"); ++ DWC_PRINTF(" Num channels: %d\n", num_channels); ++ for (i = 0; i < num_channels; i++) { ++ dwc_hc_t *hc = hcd->hc_ptr_array[i]; ++ DWC_PRINTF(" Channel %d:\n", i); ++ DWC_PRINTF(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", ++ hc->dev_addr, hc->ep_num, hc->ep_is_in); ++ DWC_PRINTF(" speed: %d\n", hc->speed); ++ DWC_PRINTF(" ep_type: %d\n", hc->ep_type); ++ DWC_PRINTF(" max_packet: %d\n", hc->max_packet); ++ DWC_PRINTF(" data_pid_start: %d\n", hc->data_pid_start); ++ DWC_PRINTF(" multi_count: %d\n", hc->multi_count); ++ DWC_PRINTF(" xfer_started: %d\n", hc->xfer_started); ++ DWC_PRINTF(" xfer_buff: %p\n", hc->xfer_buff); ++ DWC_PRINTF(" xfer_len: %d\n", hc->xfer_len); ++ DWC_PRINTF(" xfer_count: %d\n", hc->xfer_count); ++ DWC_PRINTF(" halt_on_queue: %d\n", hc->halt_on_queue); ++ DWC_PRINTF(" halt_pending: %d\n", hc->halt_pending); ++ DWC_PRINTF(" halt_status: %d\n", hc->halt_status); ++ DWC_PRINTF(" do_split: %d\n", hc->do_split); ++ DWC_PRINTF(" complete_split: %d\n", hc->complete_split); ++ DWC_PRINTF(" hub_addr: %d\n", hc->hub_addr); ++ DWC_PRINTF(" port_addr: %d\n", hc->port_addr); ++ DWC_PRINTF(" xact_pos: %d\n", hc->xact_pos); ++ DWC_PRINTF(" requests: %d\n", hc->requests); ++ DWC_PRINTF(" qh: %p\n", hc->qh); ++ if (hc->xfer_started) { ++ hfnum_data_t hfnum; ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ hfnum.d32 = ++ DWC_READ_REG32(&hcd->core_if-> ++ host_if->host_global_regs->hfnum); ++ hcchar.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if-> ++ hc_regs[i]->hcchar); ++ hctsiz.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if-> ++ hc_regs[i]->hctsiz); ++ hcint.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if-> ++ hc_regs[i]->hcint); ++ hcintmsk.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if-> ++ hc_regs[i]->hcintmsk); ++ DWC_PRINTF(" hfnum: 0x%08x\n", hfnum.d32); ++ DWC_PRINTF(" hcchar: 0x%08x\n", hcchar.d32); ++ DWC_PRINTF(" hctsiz: 0x%08x\n", hctsiz.d32); ++ DWC_PRINTF(" hcint: 0x%08x\n", hcint.d32); ++ DWC_PRINTF(" hcintmsk: 0x%08x\n", hcintmsk.d32); ++ } ++ if (hc->xfer_started && hc->qh) { ++ dwc_otg_qtd_t *qtd; ++ dwc_otg_hcd_urb_t *urb; ++ ++ DWC_CIRCLEQ_FOREACH(qtd, &hc->qh->qtd_list, qtd_list_entry) { ++ if (!qtd->in_process) ++ break; ++ ++ urb = qtd->urb; ++ DWC_PRINTF(" URB Info:\n"); ++ DWC_PRINTF(" qtd: %p, urb: %p\n", qtd, urb); ++ if (urb) { ++ DWC_PRINTF(" Dev: %d, EP: %d %s\n", ++ dwc_otg_hcd_get_dev_addr(&urb-> ++ pipe_info), ++ dwc_otg_hcd_get_ep_num(&urb-> ++ pipe_info), ++ dwc_otg_hcd_is_pipe_in(&urb-> ++ pipe_info) ? ++ "IN" : "OUT"); ++ DWC_PRINTF(" Max packet size: %d\n", ++ dwc_otg_hcd_get_mps(&urb-> ++ pipe_info)); ++ DWC_PRINTF(" transfer_buffer: %p\n", ++ urb->buf); ++ DWC_PRINTF(" transfer_dma: %p\n", ++ (void *)urb->dma); ++ DWC_PRINTF(" transfer_buffer_length: %d\n", ++ urb->length); ++ DWC_PRINTF(" actual_length: %d\n", ++ urb->actual_length); ++ } ++ } ++ } ++ } ++ DWC_PRINTF(" non_periodic_channels: %d\n", hcd->non_periodic_channels); ++ DWC_PRINTF(" periodic_channels: %d\n", hcd->periodic_channels); ++ DWC_PRINTF(" periodic_usecs: %d\n", hcd->periodic_usecs); ++ np_tx_status.d32 = ++ DWC_READ_REG32(&hcd->core_if->core_global_regs->gnptxsts); ++ DWC_PRINTF(" NP Tx Req Queue Space Avail: %d\n", ++ np_tx_status.b.nptxqspcavail); ++ DWC_PRINTF(" NP Tx FIFO Space Avail: %d\n", ++ np_tx_status.b.nptxfspcavail); ++ p_tx_status.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hptxsts); ++ DWC_PRINTF(" P Tx Req Queue Space Avail: %d\n", ++ p_tx_status.b.ptxqspcavail); ++ DWC_PRINTF(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail); ++ dwc_otg_hcd_dump_frrem(hcd); ++ dwc_otg_dump_global_registers(hcd->core_if); ++ dwc_otg_dump_host_registers(hcd->core_if); ++ DWC_PRINTF ++ ("************************************************************\n"); ++ DWC_PRINTF("\n"); ++#endif ++} ++ ++#ifdef DEBUG ++void dwc_print_setup_data(uint8_t * setup) ++{ ++ int i; ++ if (CHK_DEBUG_LEVEL(DBG_HCD)) { ++ DWC_PRINTF("Setup Data = MSB "); ++ for (i = 7; i >= 0; i--) ++ DWC_PRINTF("%02x ", setup[i]); ++ DWC_PRINTF("\n"); ++ DWC_PRINTF(" bmRequestType Tranfer = %s\n", ++ (setup[0] & 0x80) ? "Device-to-Host" : ++ "Host-to-Device"); ++ DWC_PRINTF(" bmRequestType Type = "); ++ switch ((setup[0] & 0x60) >> 5) { ++ case 0: ++ DWC_PRINTF("Standard\n"); ++ break; ++ case 1: ++ DWC_PRINTF("Class\n"); ++ break; ++ case 2: ++ DWC_PRINTF("Vendor\n"); ++ break; ++ case 3: ++ DWC_PRINTF("Reserved\n"); ++ break; ++ } ++ DWC_PRINTF(" bmRequestType Recipient = "); ++ switch (setup[0] & 0x1f) { ++ case 0: ++ DWC_PRINTF("Device\n"); ++ break; ++ case 1: ++ DWC_PRINTF("Interface\n"); ++ break; ++ case 2: ++ DWC_PRINTF("Endpoint\n"); ++ break; ++ case 3: ++ DWC_PRINTF("Other\n"); ++ break; ++ default: ++ DWC_PRINTF("Reserved\n"); ++ break; ++ } ++ DWC_PRINTF(" bRequest = 0x%0x\n", setup[1]); ++ DWC_PRINTF(" wValue = 0x%0x\n", *((uint16_t *) & setup[2])); ++ DWC_PRINTF(" wIndex = 0x%0x\n", *((uint16_t *) & setup[4])); ++ DWC_PRINTF(" wLength = 0x%0x\n\n", *((uint16_t *) & setup[6])); ++ } ++} ++#endif ++ ++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd) ++{ ++#if 0 ++ DWC_PRINTF("Frame remaining at SOF:\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->frrem_samples, hcd->frrem_accum, ++ (hcd->frrem_samples > 0) ? ++ hcd->frrem_accum / hcd->frrem_samples : 0); ++ ++ DWC_PRINTF("\n"); ++ DWC_PRINTF("Frame remaining at start_transfer (uframe 7):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->core_if->hfnum_7_samples, ++ hcd->core_if->hfnum_7_frrem_accum, ++ (hcd->core_if->hfnum_7_samples > ++ 0) ? hcd->core_if->hfnum_7_frrem_accum / ++ hcd->core_if->hfnum_7_samples : 0); ++ DWC_PRINTF("Frame remaining at start_transfer (uframe 0):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->core_if->hfnum_0_samples, ++ hcd->core_if->hfnum_0_frrem_accum, ++ (hcd->core_if->hfnum_0_samples > ++ 0) ? hcd->core_if->hfnum_0_frrem_accum / ++ hcd->core_if->hfnum_0_samples : 0); ++ DWC_PRINTF("Frame remaining at start_transfer (uframe 1-6):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->core_if->hfnum_other_samples, ++ hcd->core_if->hfnum_other_frrem_accum, ++ (hcd->core_if->hfnum_other_samples > ++ 0) ? hcd->core_if->hfnum_other_frrem_accum / ++ hcd->core_if->hfnum_other_samples : 0); ++ ++ DWC_PRINTF("\n"); ++ DWC_PRINTF("Frame remaining at sample point A (uframe 7):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_7_samples_a, hcd->hfnum_7_frrem_accum_a, ++ (hcd->hfnum_7_samples_a > 0) ? ++ hcd->hfnum_7_frrem_accum_a / hcd->hfnum_7_samples_a : 0); ++ DWC_PRINTF("Frame remaining at sample point A (uframe 0):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_0_samples_a, hcd->hfnum_0_frrem_accum_a, ++ (hcd->hfnum_0_samples_a > 0) ? ++ hcd->hfnum_0_frrem_accum_a / hcd->hfnum_0_samples_a : 0); ++ DWC_PRINTF("Frame remaining at sample point A (uframe 1-6):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_other_samples_a, hcd->hfnum_other_frrem_accum_a, ++ (hcd->hfnum_other_samples_a > 0) ? ++ hcd->hfnum_other_frrem_accum_a / ++ hcd->hfnum_other_samples_a : 0); ++ ++ DWC_PRINTF("\n"); ++ DWC_PRINTF("Frame remaining at sample point B (uframe 7):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_7_samples_b, hcd->hfnum_7_frrem_accum_b, ++ (hcd->hfnum_7_samples_b > 0) ? ++ hcd->hfnum_7_frrem_accum_b / hcd->hfnum_7_samples_b : 0); ++ DWC_PRINTF("Frame remaining at sample point B (uframe 0):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_0_samples_b, hcd->hfnum_0_frrem_accum_b, ++ (hcd->hfnum_0_samples_b > 0) ? ++ hcd->hfnum_0_frrem_accum_b / hcd->hfnum_0_samples_b : 0); ++ DWC_PRINTF("Frame remaining at sample point B (uframe 1-6):\n"); ++ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_other_samples_b, hcd->hfnum_other_frrem_accum_b, ++ (hcd->hfnum_other_samples_b > 0) ? ++ hcd->hfnum_other_frrem_accum_b / ++ hcd->hfnum_other_samples_b : 0); ++#endif ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.h +@@ -0,0 +1,868 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $ ++ * $Revision: #58 $ ++ * $Date: 2011/09/15 $ ++ * $Change: 1846647 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++#ifndef __DWC_HCD_H__ ++#define __DWC_HCD_H__ ++ ++#include "dwc_otg_os_dep.h" ++#include "usb.h" ++#include "dwc_otg_hcd_if.h" ++#include "dwc_otg_core_if.h" ++#include "dwc_list.h" ++#include "dwc_otg_cil.h" ++#include "dwc_otg_fiq_fsm.h" ++#include "dwc_otg_driver.h" ++ ++ ++/** ++ * @file ++ * ++ * This file contains the structures, constants, and interfaces for ++ * the Host Contoller Driver (HCD). ++ * ++ * The Host Controller Driver (HCD) is responsible for translating requests ++ * from the USB Driver into the appropriate actions on the DWC_otg controller. ++ * It isolates the USBD from the specifics of the controller by providing an ++ * API to the USBD. ++ */ ++ ++struct dwc_otg_hcd_pipe_info { ++ uint8_t dev_addr; ++ uint8_t ep_num; ++ uint8_t pipe_type; ++ uint8_t pipe_dir; ++ uint16_t mps; ++}; ++ ++struct dwc_otg_hcd_iso_packet_desc { ++ uint32_t offset; ++ uint32_t length; ++ uint32_t actual_length; ++ uint32_t status; ++}; ++ ++struct dwc_otg_qtd; ++ ++struct dwc_otg_hcd_urb { ++ void *priv; ++ struct dwc_otg_qtd *qtd; ++ void *buf; ++ dwc_dma_t dma; ++ void *setup_packet; ++ dwc_dma_t setup_dma; ++ uint32_t length; ++ uint32_t actual_length; ++ uint32_t status; ++ uint32_t error_count; ++ uint32_t packet_count; ++ uint32_t flags; ++ uint16_t interval; ++ struct dwc_otg_hcd_pipe_info pipe_info; ++ struct dwc_otg_hcd_iso_packet_desc iso_descs[0]; ++}; ++ ++static inline uint8_t dwc_otg_hcd_get_ep_num(struct dwc_otg_hcd_pipe_info *pipe) ++{ ++ return pipe->ep_num; ++} ++ ++static inline uint8_t dwc_otg_hcd_get_pipe_type(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return pipe->pipe_type; ++} ++ ++static inline uint16_t dwc_otg_hcd_get_mps(struct dwc_otg_hcd_pipe_info *pipe) ++{ ++ return pipe->mps; ++} ++ ++static inline uint8_t dwc_otg_hcd_get_dev_addr(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return pipe->dev_addr; ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_isoc(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (pipe->pipe_type == UE_ISOCHRONOUS); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_int(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (pipe->pipe_type == UE_INTERRUPT); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_bulk(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (pipe->pipe_type == UE_BULK); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_control(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (pipe->pipe_type == UE_CONTROL); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_in(struct dwc_otg_hcd_pipe_info *pipe) ++{ ++ return (pipe->pipe_dir == UE_DIR_IN); ++} ++ ++static inline uint8_t dwc_otg_hcd_is_pipe_out(struct dwc_otg_hcd_pipe_info ++ *pipe) ++{ ++ return (!dwc_otg_hcd_is_pipe_in(pipe)); ++} ++ ++static inline void dwc_otg_hcd_fill_pipe(struct dwc_otg_hcd_pipe_info *pipe, ++ uint8_t devaddr, uint8_t ep_num, ++ uint8_t pipe_type, uint8_t pipe_dir, ++ uint16_t mps) ++{ ++ pipe->dev_addr = devaddr; ++ pipe->ep_num = ep_num; ++ pipe->pipe_type = pipe_type; ++ pipe->pipe_dir = pipe_dir; ++ pipe->mps = mps; ++} ++ ++/** ++ * Phases for control transfers. ++ */ ++typedef enum dwc_otg_control_phase { ++ DWC_OTG_CONTROL_SETUP, ++ DWC_OTG_CONTROL_DATA, ++ DWC_OTG_CONTROL_STATUS ++} dwc_otg_control_phase_e; ++ ++/** Transaction types. */ ++typedef enum dwc_otg_transaction_type { ++ DWC_OTG_TRANSACTION_NONE = 0, ++ DWC_OTG_TRANSACTION_PERIODIC = 1, ++ DWC_OTG_TRANSACTION_NON_PERIODIC = 2, ++ DWC_OTG_TRANSACTION_ALL = DWC_OTG_TRANSACTION_PERIODIC + DWC_OTG_TRANSACTION_NON_PERIODIC ++} dwc_otg_transaction_type_e; ++ ++struct dwc_otg_qh; ++ ++/** ++ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control, ++ * interrupt, or isochronous transfer. A single QTD is created for each URB ++ * (of one of these types) submitted to the HCD. The transfer associated with ++ * a QTD may require one or multiple transactions. ++ * ++ * A QTD is linked to a Queue Head, which is entered in either the ++ * non-periodic or periodic schedule for execution. When a QTD is chosen for ++ * execution, some or all of its transactions may be executed. After ++ * execution, the state of the QTD is updated. The QTD may be retired if all ++ * its transactions are complete or if an error occurred. Otherwise, it ++ * remains in the schedule so more transactions can be executed later. ++ */ ++typedef struct dwc_otg_qtd { ++ /** ++ * Determines the PID of the next data packet for the data phase of ++ * control transfers. Ignored for other transfer types.
++ * One of the following values: ++ * - DWC_OTG_HC_PID_DATA0 ++ * - DWC_OTG_HC_PID_DATA1 ++ */ ++ uint8_t data_toggle; ++ ++ /** Current phase for control transfers (Setup, Data, or Status). */ ++ dwc_otg_control_phase_e control_phase; ++ ++ /** Keep track of the current split type ++ * for FS/LS endpoints on a HS Hub */ ++ uint8_t complete_split; ++ ++ /** How many bytes transferred during SSPLIT OUT */ ++ uint32_t ssplit_out_xfer_count; ++ ++ /** ++ * Holds the number of bus errors that have occurred for a transaction ++ * within this transfer. ++ */ ++ uint8_t error_count; ++ ++ /** ++ * Index of the next frame descriptor for an isochronous transfer. A ++ * frame descriptor describes the buffer position and length of the ++ * data to be transferred in the next scheduled (micro)frame of an ++ * isochronous transfer. It also holds status for that transaction. ++ * The frame index starts at 0. ++ */ ++ uint16_t isoc_frame_index; ++ ++ /** Position of the ISOC split on full/low speed */ ++ uint8_t isoc_split_pos; ++ ++ /** Position of the ISOC split in the buffer for the current frame */ ++ uint16_t isoc_split_offset; ++ ++ /** URB for this transfer */ ++ struct dwc_otg_hcd_urb *urb; ++ ++ struct dwc_otg_qh *qh; ++ ++ /** This list of QTDs */ ++ DWC_CIRCLEQ_ENTRY(dwc_otg_qtd) qtd_list_entry; ++ ++ /** Indicates if this QTD is currently processed by HW. */ ++ uint8_t in_process; ++ ++ /** Number of DMA descriptors for this QTD */ ++ uint8_t n_desc; ++ ++ /** ++ * Last activated frame(packet) index. ++ * Used in Descriptor DMA mode only. ++ */ ++ uint16_t isoc_frame_index_last; ++ ++} dwc_otg_qtd_t; ++ ++DWC_CIRCLEQ_HEAD(dwc_otg_qtd_list, dwc_otg_qtd); ++ ++/** ++ * A Queue Head (QH) holds the static characteristics of an endpoint and ++ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may ++ * be entered in either the non-periodic or periodic schedule. ++ */ ++typedef struct dwc_otg_qh { ++ /** ++ * Endpoint type. ++ * One of the following values: ++ * - UE_CONTROL ++ * - UE_BULK ++ * - UE_INTERRUPT ++ * - UE_ISOCHRONOUS ++ */ ++ uint8_t ep_type; ++ uint8_t ep_is_in; ++ ++ /** wMaxPacketSize Field of Endpoint Descriptor. */ ++ uint16_t maxp; ++ ++ /** ++ * Device speed. ++ * One of the following values: ++ * - DWC_OTG_EP_SPEED_LOW ++ * - DWC_OTG_EP_SPEED_FULL ++ * - DWC_OTG_EP_SPEED_HIGH ++ */ ++ uint8_t dev_speed; ++ ++ /** ++ * Determines the PID of the next data packet for non-control ++ * transfers. Ignored for control transfers.
++ * One of the following values: ++ * - DWC_OTG_HC_PID_DATA0 ++ * - DWC_OTG_HC_PID_DATA1 ++ */ ++ uint8_t data_toggle; ++ ++ /** Ping state if 1. */ ++ uint8_t ping_state; ++ ++ /** ++ * List of QTDs for this QH. ++ */ ++ struct dwc_otg_qtd_list qtd_list; ++ ++ /** Host channel currently processing transfers for this QH. */ ++ struct dwc_hc *channel; ++ ++ /** Full/low speed endpoint on high-speed hub requires split. */ ++ uint8_t do_split; ++ ++ /** @name Periodic schedule information */ ++ /** @{ */ ++ ++ /** Bandwidth in microseconds per (micro)frame. */ ++ uint16_t usecs; ++ ++ /** Interval between transfers in (micro)frames. */ ++ uint16_t interval; ++ ++ /** ++ * (micro)frame to initialize a periodic transfer. The transfer ++ * executes in the following (micro)frame. ++ */ ++ uint16_t sched_frame; ++ ++ /* ++ ** Frame a NAK was received on this queue head, used to minimise NAK retransmission ++ */ ++ uint16_t nak_frame; ++ ++ /** (micro)frame at which last start split was initialized. */ ++ uint16_t start_split_frame; ++ ++ /** @} */ ++ ++ /** ++ * Used instead of original buffer if ++ * it(physical address) is not dword-aligned. ++ */ ++ uint8_t *dw_align_buf; ++ dwc_dma_t dw_align_buf_dma; ++ ++ /** Entry for QH in either the periodic or non-periodic schedule. */ ++ dwc_list_link_t qh_list_entry; ++ ++ /** @name Descriptor DMA support */ ++ /** @{ */ ++ ++ /** Descriptor List. */ ++ dwc_otg_host_dma_desc_t *desc_list; ++ ++ /** Descriptor List physical address. */ ++ dwc_dma_t desc_list_dma; ++ ++ /** ++ * Xfer Bytes array. ++ * Each element corresponds to a descriptor and indicates ++ * original XferSize size value for the descriptor. ++ */ ++ uint32_t *n_bytes; ++ ++ /** Actual number of transfer descriptors in a list. */ ++ uint16_t ntd; ++ ++ /** First activated isochronous transfer descriptor index. */ ++ uint8_t td_first; ++ /** Last activated isochronous transfer descriptor index. */ ++ uint8_t td_last; ++ ++ /** @} */ ++ ++ ++ uint16_t speed; ++ uint16_t frame_usecs[8]; ++ ++ uint32_t skip_count; ++} dwc_otg_qh_t; ++ ++DWC_CIRCLEQ_HEAD(hc_list, dwc_hc); ++ ++typedef struct urb_tq_entry { ++ struct urb *urb; ++ DWC_TAILQ_ENTRY(urb_tq_entry) urb_tq_entries; ++} urb_tq_entry_t; ++ ++DWC_TAILQ_HEAD(urb_list, urb_tq_entry); ++ ++/** ++ * This structure holds the state of the HCD, including the non-periodic and ++ * periodic schedules. ++ */ ++struct dwc_otg_hcd { ++ /** The DWC otg device pointer */ ++ struct dwc_otg_device *otg_dev; ++ /** DWC OTG Core Interface Layer */ ++ dwc_otg_core_if_t *core_if; ++ ++ /** Function HCD driver callbacks */ ++ struct dwc_otg_hcd_function_ops *fops; ++ ++ /** Internal DWC HCD Flags */ ++ volatile union dwc_otg_hcd_internal_flags { ++ uint32_t d32; ++ struct { ++ unsigned port_connect_status_change:1; ++ unsigned port_connect_status:1; ++ unsigned port_reset_change:1; ++ unsigned port_enable_change:1; ++ unsigned port_suspend_change:1; ++ unsigned port_over_current_change:1; ++ unsigned port_l1_change:1; ++ unsigned reserved:26; ++ } b; ++ } flags; ++ ++ /** ++ * Inactive items in the non-periodic schedule. This is a list of ++ * Queue Heads. Transfers associated with these Queue Heads are not ++ * currently assigned to a host channel. ++ */ ++ dwc_list_link_t non_periodic_sched_inactive; ++ ++ /** ++ * Active items in the non-periodic schedule. This is a list of ++ * Queue Heads. Transfers associated with these Queue Heads are ++ * currently assigned to a host channel. ++ */ ++ dwc_list_link_t non_periodic_sched_active; ++ ++ /** ++ * Pointer to the next Queue Head to process in the active ++ * non-periodic schedule. ++ */ ++ dwc_list_link_t *non_periodic_qh_ptr; ++ ++ /** ++ * Inactive items in the periodic schedule. This is a list of QHs for ++ * periodic transfers that are _not_ scheduled for the next frame. ++ * Each QH in the list has an interval counter that determines when it ++ * needs to be scheduled for execution. This scheduling mechanism ++ * allows only a simple calculation for periodic bandwidth used (i.e. ++ * must assume that all periodic transfers may need to execute in the ++ * same frame). However, it greatly simplifies scheduling and should ++ * be sufficient for the vast majority of OTG hosts, which need to ++ * connect to a small number of peripherals at one time. ++ * ++ * Items move from this list to periodic_sched_ready when the QH ++ * interval counter is 0 at SOF. ++ */ ++ dwc_list_link_t periodic_sched_inactive; ++ ++ /** ++ * List of periodic QHs that are ready for execution in the next ++ * frame, but have not yet been assigned to host channels. ++ * ++ * Items move from this list to periodic_sched_assigned as host ++ * channels become available during the current frame. ++ */ ++ dwc_list_link_t periodic_sched_ready; ++ ++ /** ++ * List of periodic QHs to be executed in the next frame that are ++ * assigned to host channels. ++ * ++ * Items move from this list to periodic_sched_queued as the ++ * transactions for the QH are queued to the DWC_otg controller. ++ */ ++ dwc_list_link_t periodic_sched_assigned; ++ ++ /** ++ * List of periodic QHs that have been queued for execution. ++ * ++ * Items move from this list to either periodic_sched_inactive or ++ * periodic_sched_ready when the channel associated with the transfer ++ * is released. If the interval for the QH is 1, the item moves to ++ * periodic_sched_ready because it must be rescheduled for the next ++ * frame. Otherwise, the item moves to periodic_sched_inactive. ++ */ ++ dwc_list_link_t periodic_sched_queued; ++ ++ /** ++ * Total bandwidth claimed so far for periodic transfers. This value ++ * is in microseconds per (micro)frame. The assumption is that all ++ * periodic transfers may occur in the same (micro)frame. ++ */ ++ uint16_t periodic_usecs; ++ ++ /** ++ * Total bandwidth claimed so far for all periodic transfers ++ * in a frame. ++ * This will include a mixture of HS and FS transfers. ++ * Units are microseconds per (micro)frame. ++ * We have a budget per frame and have to schedule ++ * transactions accordingly. ++ * Watch out for the fact that things are actually scheduled for the ++ * "next frame". ++ */ ++ uint16_t frame_usecs[8]; ++ ++ ++ /** ++ * Frame number read from the core at SOF. The value ranges from 0 to ++ * DWC_HFNUM_MAX_FRNUM. ++ */ ++ uint16_t frame_number; ++ ++ /** ++ * Count of periodic QHs, if using several eps. For SOF enable/disable. ++ */ ++ uint16_t periodic_qh_count; ++ ++ /** ++ * Free host channels in the controller. This is a list of ++ * dwc_hc_t items. ++ */ ++ struct hc_list free_hc_list; ++ /** ++ * Number of host channels assigned to periodic transfers. Currently ++ * assuming that there is a dedicated host channel for each periodic ++ * transaction and at least one host channel available for ++ * non-periodic transactions. ++ */ ++ int periodic_channels; /* microframe_schedule==0 */ ++ ++ /** ++ * Number of host channels assigned to non-periodic transfers. ++ */ ++ int non_periodic_channels; /* microframe_schedule==0 */ ++ ++ /** ++ * Number of host channels assigned to non-periodic transfers. ++ */ ++ int available_host_channels; ++ ++ /** ++ * Array of pointers to the host channel descriptors. Allows accessing ++ * a host channel descriptor given the host channel number. This is ++ * useful in interrupt handlers. ++ */ ++ struct dwc_hc *hc_ptr_array[MAX_EPS_CHANNELS]; ++ ++ /** ++ * Buffer to use for any data received during the status phase of a ++ * control transfer. Normally no data is transferred during the status ++ * phase. This buffer is used as a bit bucket. ++ */ ++ uint8_t *status_buf; ++ ++ /** ++ * DMA address for status_buf. ++ */ ++ dma_addr_t status_buf_dma; ++#define DWC_OTG_HCD_STATUS_BUF_SIZE 64 ++ ++ /** ++ * Connection timer. An OTG host must display a message if the device ++ * does not connect. Started when the VBus power is turned on via ++ * sysfs attribute "buspower". ++ */ ++ dwc_timer_t *conn_timer; ++ ++ /* Tasket to do a reset */ ++ dwc_tasklet_t *reset_tasklet; ++ ++ dwc_tasklet_t *completion_tasklet; ++ struct urb_list completed_urb_list; ++ ++ /* */ ++ dwc_spinlock_t *lock; ++ dwc_spinlock_t *channel_lock; ++ /** ++ * Private data that could be used by OS wrapper. ++ */ ++ void *priv; ++ ++ uint8_t otg_port; ++ ++ /** Frame List */ ++ uint32_t *frame_list; ++ ++ /** Hub - Port assignment */ ++ int hub_port[128]; ++#ifdef FIQ_DEBUG ++ int hub_port_alloc[2048]; ++#endif ++ ++ /** Frame List DMA address */ ++ dma_addr_t frame_list_dma; ++ ++ struct fiq_stack *fiq_stack; ++ struct fiq_state *fiq_state; ++ ++ /** Virtual address for split transaction DMA bounce buffers */ ++ struct fiq_dma_blob *fiq_dmab; ++ ++#ifdef DEBUG ++ uint32_t frrem_samples; ++ uint64_t frrem_accum; ++ ++ uint32_t hfnum_7_samples_a; ++ uint64_t hfnum_7_frrem_accum_a; ++ uint32_t hfnum_0_samples_a; ++ uint64_t hfnum_0_frrem_accum_a; ++ uint32_t hfnum_other_samples_a; ++ uint64_t hfnum_other_frrem_accum_a; ++ ++ uint32_t hfnum_7_samples_b; ++ uint64_t hfnum_7_frrem_accum_b; ++ uint32_t hfnum_0_samples_b; ++ uint64_t hfnum_0_frrem_accum_b; ++ uint32_t hfnum_other_samples_b; ++ uint64_t hfnum_other_frrem_accum_b; ++#endif ++}; ++ ++static inline struct device *dwc_otg_hcd_to_dev(struct dwc_otg_hcd *hcd) ++{ ++ return &hcd->otg_dev->os_dep.platformdev->dev; ++} ++ ++/** @name Transaction Execution Functions */ ++/** @{ */ ++extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t ++ * hcd); ++extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd, ++ dwc_otg_transaction_type_e tr_type); ++ ++int dwc_otg_hcd_allocate_port(dwc_otg_hcd_t * hcd, dwc_otg_qh_t *qh); ++void dwc_otg_hcd_release_port(dwc_otg_hcd_t * dwc_otg_hcd, dwc_otg_qh_t *qh); ++ ++extern int fiq_fsm_queue_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh); ++extern int fiq_fsm_transaction_suitable(dwc_otg_qh_t *qh); ++extern void dwc_otg_cleanup_fiq_channel(dwc_otg_hcd_t *hcd, uint32_t num); ++ ++/** @} */ ++ ++/** @name Interrupt Handler Functions */ ++/** @{ */ ++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, ++ uint32_t num); ++extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t * ++ dwc_otg_hcd); ++/** @} */ ++ ++/** @name Schedule Queue Functions */ ++/** @{ */ ++ ++/* Implemented in dwc_otg_hcd_queue.c */ ++extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd, ++ dwc_otg_hcd_urb_t * urb, int atomic_alloc); ++extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, ++ int sched_csplit); ++ ++/** Remove and free a QH */ ++static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t * hcd, ++ dwc_otg_qh_t * qh) ++{ ++ dwc_irqflags_t flags; ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ dwc_otg_hcd_qh_free(hcd, qh); ++} ++ ++/** Allocates memory for a QH structure. ++ * @return Returns the memory allocate or NULL on error. */ ++static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(int atomic_alloc) ++{ ++ if (atomic_alloc) ++ return (dwc_otg_qh_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qh_t)); ++ else ++ return (dwc_otg_qh_t *) DWC_ALLOC(sizeof(dwc_otg_qh_t)); ++} ++ ++extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb, ++ int atomic_alloc); ++extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb); ++extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd, dwc_otg_hcd_t * dwc_otg_hcd, ++ dwc_otg_qh_t ** qh, int atomic_alloc); ++ ++/** Allocates memory for a QTD structure. ++ * @return Returns the memory allocate or NULL on error. */ ++static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(int atomic_alloc) ++{ ++ if (atomic_alloc) ++ return (dwc_otg_qtd_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qtd_t)); ++ else ++ return (dwc_otg_qtd_t *) DWC_ALLOC(sizeof(dwc_otg_qtd_t)); ++} ++ ++/** Frees the memory for a QTD structure. QTD should already be removed from ++ * list. ++ * @param qtd QTD to free.*/ ++static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t * qtd) ++{ ++ DWC_FREE(qtd); ++} ++ ++/** Removes a QTD from list. ++ * @param hcd HCD instance. ++ * @param qtd QTD to remove from list. ++ * @param qh QTD belongs to. ++ */ ++static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t * hcd, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_qh_t * qh) ++{ ++ DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry); ++} ++ ++/** Remove and free a QTD ++ * Need to disable IRQ and hold hcd lock while calling this function out of ++ * interrupt servicing chain */ ++static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t * hcd, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_qh_t * qh) ++{ ++ dwc_otg_hcd_qtd_remove(hcd, qtd, qh); ++ dwc_otg_hcd_qtd_free(qtd); ++} ++ ++/** @} */ ++ ++/** @name Descriptor DMA Supporting Functions */ ++/** @{ */ ++ ++extern void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_halt_status_e halt_status); ++ ++extern int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++extern void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); ++ ++/** @} */ ++ ++/** @name Internal Functions */ ++/** @{ */ ++dwc_otg_qh_t *dwc_urb_to_qh(dwc_otg_hcd_urb_t * urb); ++/** @} */ ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++extern int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd, ++ uint8_t devaddr); ++extern void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd); ++#endif ++ ++/** Gets the QH that contains the list_head */ ++#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry) ++ ++/** Gets the QTD that contains the list_head */ ++#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry) ++ ++/** Check if QH is non-periodic */ ++#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == UE_BULK) || \ ++ (_qh_ptr_->ep_type == UE_CONTROL)) ++ ++/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */ ++#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) ++ ++/** Packet size for any kind of endpoint descriptor */ ++#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) ++ ++/** ++ * Returns true if _frame1 is less than or equal to _frame2. The comparison is ++ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the ++ * frame number when the max frame number is reached. ++ */ ++static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2) ++{ ++ return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <= ++ (DWC_HFNUM_MAX_FRNUM >> 1); ++} ++ ++/** ++ * Returns true if _frame1 is greater than _frame2. The comparison is done ++ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame ++ * number when the max frame number is reached. ++ */ ++static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2) ++{ ++ return (frame1 != frame2) && ++ (((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) < ++ (DWC_HFNUM_MAX_FRNUM >> 1)); ++} ++ ++/** ++ * Increments _frame by the amount specified by _inc. The addition is done ++ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value. ++ */ ++static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc) ++{ ++ return (frame + inc) & DWC_HFNUM_MAX_FRNUM; ++} ++ ++static inline uint16_t dwc_full_frame_num(uint16_t frame) ++{ ++ return (frame & DWC_HFNUM_MAX_FRNUM) >> 3; ++} ++ ++static inline uint16_t dwc_micro_frame_num(uint16_t frame) ++{ ++ return frame & 0x7; ++} ++ ++void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd); ++ ++#ifdef DEBUG ++/** ++ * Macro to sample the remaining PHY clocks left in the current frame. This ++ * may be used during debugging to determine the average time it takes to ++ * execute sections of code. There are two possible sample points, "a" and ++ * "b", so the _letter argument must be one of these values. ++ * ++ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For ++ * example, "cat /sys/devices/lm0/hcd_frrem". ++ */ ++#define dwc_sample_frrem(_hcd, _qh, _letter) \ ++{ \ ++ hfnum_data_t hfnum; \ ++ dwc_otg_qtd_t *qtd; \ ++ qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \ ++ if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \ ++ hfnum.d32 = DWC_READ_REG32(&_hcd->core_if->host_if->host_global_regs->hfnum); \ ++ switch (hfnum.b.frnum & 0x7) { \ ++ case 7: \ ++ _hcd->hfnum_7_samples_##_letter++; \ ++ _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \ ++ break; \ ++ case 0: \ ++ _hcd->hfnum_0_samples_##_letter++; \ ++ _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \ ++ break; \ ++ default: \ ++ _hcd->hfnum_other_samples_##_letter++; \ ++ _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \ ++ break; \ ++ } \ ++ } \ ++} ++#else ++#define dwc_sample_frrem(_hcd, _qh, _letter) ++#endif ++#endif ++#endif /* DWC_DEVICE_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c +@@ -0,0 +1,1139 @@ ++/*========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_ddma.c $ ++ * $Revision: #10 $ ++ * $Date: 2011/10/20 $ ++ * $Change: 1869464 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** @file ++ * This file contains Descriptor DMA support implementation for host mode. ++ */ ++ ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++ ++extern bool microframe_schedule; ++ ++static inline uint8_t frame_list_idx(uint16_t frame) ++{ ++ return (frame & (MAX_FRLIST_EN_NUM - 1)); ++} ++ ++static inline uint16_t desclist_idx_inc(uint16_t idx, uint16_t inc, uint8_t speed) ++{ ++ return (idx + inc) & ++ (((speed == ++ DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC : ++ MAX_DMA_DESC_NUM_GENERIC) - 1); ++} ++ ++static inline uint16_t desclist_idx_dec(uint16_t idx, uint16_t inc, uint8_t speed) ++{ ++ return (idx - inc) & ++ (((speed == ++ DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC : ++ MAX_DMA_DESC_NUM_GENERIC) - 1); ++} ++ ++static inline uint16_t max_desc_num(dwc_otg_qh_t * qh) ++{ ++ return (((qh->ep_type == UE_ISOCHRONOUS) ++ && (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH)) ++ ? MAX_DMA_DESC_NUM_HS_ISOC : MAX_DMA_DESC_NUM_GENERIC); ++} ++static inline uint16_t frame_incr_val(dwc_otg_qh_t * qh) ++{ ++ return ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) ++ ? ((qh->interval + 8 - 1) / 8) ++ : qh->interval); ++} ++ ++static int desc_list_alloc(struct device *dev, dwc_otg_qh_t * qh) ++{ ++ int retval = 0; ++ ++ qh->desc_list = (dwc_otg_host_dma_desc_t *) ++ DWC_DMA_ALLOC(dev, sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh), ++ &qh->desc_list_dma); ++ ++ if (!qh->desc_list) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: DMA descriptor list allocation failed\n", __func__); ++ ++ } ++ ++ dwc_memset(qh->desc_list, 0x00, ++ sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh)); ++ ++ qh->n_bytes = ++ (uint32_t *) DWC_ALLOC(sizeof(uint32_t) * max_desc_num(qh)); ++ ++ if (!qh->n_bytes) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR ++ ("%s: Failed to allocate array for descriptors' size actual values\n", ++ __func__); ++ ++ } ++ return retval; ++ ++} ++ ++static void desc_list_free(struct device *dev, dwc_otg_qh_t * qh) ++{ ++ if (qh->desc_list) { ++ DWC_DMA_FREE(dev, max_desc_num(qh), qh->desc_list, ++ qh->desc_list_dma); ++ qh->desc_list = NULL; ++ } ++ ++ if (qh->n_bytes) { ++ DWC_FREE(qh->n_bytes); ++ qh->n_bytes = NULL; ++ } ++} ++ ++static int frame_list_alloc(dwc_otg_hcd_t * hcd) ++{ ++ struct device *dev = dwc_otg_hcd_to_dev(hcd); ++ int retval = 0; ++ ++ if (hcd->frame_list) ++ return 0; ++ ++ hcd->frame_list = DWC_DMA_ALLOC(dev, 4 * MAX_FRLIST_EN_NUM, ++ &hcd->frame_list_dma); ++ if (!hcd->frame_list) { ++ retval = -DWC_E_NO_MEMORY; ++ DWC_ERROR("%s: Frame List allocation failed\n", __func__); ++ } ++ ++ dwc_memset(hcd->frame_list, 0x00, 4 * MAX_FRLIST_EN_NUM); ++ ++ return retval; ++} ++ ++static void frame_list_free(dwc_otg_hcd_t * hcd) ++{ ++ struct device *dev = dwc_otg_hcd_to_dev(hcd); ++ ++ if (!hcd->frame_list) ++ return; ++ ++ DWC_DMA_FREE(dev, 4 * MAX_FRLIST_EN_NUM, hcd->frame_list, hcd->frame_list_dma); ++ hcd->frame_list = NULL; ++} ++ ++static void per_sched_enable(dwc_otg_hcd_t * hcd, uint16_t fr_list_en) ++{ ++ ++ hcfg_data_t hcfg; ++ ++ hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg); ++ ++ if (hcfg.b.perschedena) { ++ /* already enabled */ ++ return; ++ } ++ ++ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hflbaddr, ++ hcd->frame_list_dma); ++ ++ switch (fr_list_en) { ++ case 64: ++ hcfg.b.frlisten = 3; ++ break; ++ case 32: ++ hcfg.b.frlisten = 2; ++ break; ++ case 16: ++ hcfg.b.frlisten = 1; ++ break; ++ case 8: ++ hcfg.b.frlisten = 0; ++ break; ++ default: ++ break; ++ } ++ ++ hcfg.b.perschedena = 1; ++ ++ DWC_DEBUGPL(DBG_HCD, "Enabling Periodic schedule\n"); ++ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32); ++ ++} ++ ++static void per_sched_disable(dwc_otg_hcd_t * hcd) ++{ ++ hcfg_data_t hcfg; ++ ++ hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg); ++ ++ if (!hcfg.b.perschedena) { ++ /* already disabled */ ++ return; ++ } ++ hcfg.b.perschedena = 0; ++ ++ DWC_DEBUGPL(DBG_HCD, "Disabling Periodic schedule\n"); ++ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32); ++} ++ ++/* ++ * Activates/Deactivates FrameList entries for the channel ++ * based on endpoint servicing period. ++ */ ++void update_frame_list(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, uint8_t enable) ++{ ++ uint16_t i, j, inc; ++ dwc_hc_t *hc = NULL; ++ ++ if (!qh->channel) { ++ DWC_ERROR("qh->channel = %p", qh->channel); ++ return; ++ } ++ ++ if (!hcd) { ++ DWC_ERROR("------hcd = %p", hcd); ++ return; ++ } ++ ++ if (!hcd->frame_list) { ++ DWC_ERROR("-------hcd->frame_list = %p", hcd->frame_list); ++ return; ++ } ++ ++ hc = qh->channel; ++ inc = frame_incr_val(qh); ++ if (qh->ep_type == UE_ISOCHRONOUS) ++ i = frame_list_idx(qh->sched_frame); ++ else ++ i = 0; ++ ++ j = i; ++ do { ++ if (enable) ++ hcd->frame_list[j] |= (1 << hc->hc_num); ++ else ++ hcd->frame_list[j] &= ~(1 << hc->hc_num); ++ j = (j + inc) & (MAX_FRLIST_EN_NUM - 1); ++ } ++ while (j != i); ++ if (!enable) ++ return; ++ hc->schinfo = 0; ++ if (qh->channel->speed == DWC_OTG_EP_SPEED_HIGH) { ++ j = 1; ++ /* TODO - check this */ ++ inc = (8 + qh->interval - 1) / qh->interval; ++ for (i = 0; i < inc; i++) { ++ hc->schinfo |= j; ++ j = j << qh->interval; ++ } ++ } else { ++ hc->schinfo = 0xff; ++ } ++} ++ ++#if 1 ++void dump_frame_list(dwc_otg_hcd_t * hcd) ++{ ++ int i = 0; ++ DWC_PRINTF("--FRAME LIST (hex) --\n"); ++ for (i = 0; i < MAX_FRLIST_EN_NUM; i++) { ++ DWC_PRINTF("%x\t", hcd->frame_list[i]); ++ if (!(i % 8) && i) ++ DWC_PRINTF("\n"); ++ } ++ DWC_PRINTF("\n----\n"); ++ ++} ++#endif ++ ++static void release_channel_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ dwc_irqflags_t flags; ++ dwc_spinlock_t *channel_lock = hcd->channel_lock; ++ ++ dwc_hc_t *hc = qh->channel; ++ if (dwc_qh_is_non_per(qh)) { ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ if (!microframe_schedule) ++ hcd->non_periodic_channels--; ++ else ++ hcd->available_host_channels++; ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ } else ++ update_frame_list(hcd, qh, 0); ++ ++ /* ++ * The condition is added to prevent double cleanup try in case of device ++ * disconnect. See channel cleanup in dwc_otg_hcd_disconnect_cb(). ++ */ ++ if (hc->qh) { ++ dwc_otg_hc_cleanup(hcd->core_if, hc); ++ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); ++ hc->qh = NULL; ++ } ++ ++ qh->channel = NULL; ++ qh->ntd = 0; ++ ++ if (qh->desc_list) { ++ dwc_memset(qh->desc_list, 0x00, ++ sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh)); ++ } ++} ++ ++/** ++ * Initializes a QH structure's Descriptor DMA related members. ++ * Allocates memory for descriptor list. ++ * On first periodic QH, allocates memory for FrameList ++ * and enables periodic scheduling. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh The QH to init. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ struct device *dev = dwc_otg_hcd_to_dev(hcd); ++ int retval = 0; ++ ++ if (qh->do_split) { ++ DWC_ERROR("SPLIT Transfers are not supported in Descriptor DMA.\n"); ++ return -1; ++ } ++ ++ retval = desc_list_alloc(dev, qh); ++ ++ if ((retval == 0) ++ && (qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT)) { ++ if (!hcd->frame_list) { ++ retval = frame_list_alloc(hcd); ++ /* Enable periodic schedule on first periodic QH */ ++ if (retval == 0) ++ per_sched_enable(hcd, MAX_FRLIST_EN_NUM); ++ } ++ } ++ ++ qh->ntd = 0; ++ ++ return retval; ++} ++ ++/** ++ * Frees descriptor list memory associated with the QH. ++ * If QH is periodic and the last, frees FrameList memory ++ * and disables periodic scheduling. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh The QH to init. ++ */ ++void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ struct device *dev = dwc_otg_hcd_to_dev(hcd); ++ ++ desc_list_free(dev, qh); ++ ++ /* ++ * Channel still assigned due to some reasons. ++ * Seen on Isoc URB dequeue. Channel halted but no subsequent ++ * ChHalted interrupt to release the channel. Afterwards ++ * when it comes here from endpoint disable routine ++ * channel remains assigned. ++ */ ++ if (qh->channel) ++ release_channel_ddma(hcd, qh); ++ ++ if ((qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT) ++ && (microframe_schedule || !hcd->periodic_channels) && hcd->frame_list) { ++ ++ per_sched_disable(hcd); ++ frame_list_free(hcd); ++ } ++} ++ ++static uint8_t frame_to_desc_idx(dwc_otg_qh_t * qh, uint16_t frame_idx) ++{ ++ if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) { ++ /* ++ * Descriptor set(8 descriptors) index ++ * which is 8-aligned. ++ */ ++ return (frame_idx & ((MAX_DMA_DESC_NUM_HS_ISOC / 8) - 1)) * 8; ++ } else { ++ return (frame_idx & (MAX_DMA_DESC_NUM_GENERIC - 1)); ++ } ++} ++ ++/* ++ * Determine starting frame for Isochronous transfer. ++ * Few frames skipped to prevent race condition with HC. ++ */ ++static uint8_t calc_starting_frame(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, ++ uint8_t * skip_frames) ++{ ++ uint16_t frame = 0; ++ hcd->frame_number = dwc_otg_hcd_get_frame_number(hcd); ++ ++ /* sched_frame is always frame number(not uFrame) both in FS and HS !! */ ++ ++ /* ++ * skip_frames is used to limit activated descriptors number ++ * to avoid the situation when HC services the last activated ++ * descriptor firstly. ++ * Example for FS: ++ * Current frame is 1, scheduled frame is 3. Since HC always fetches the descriptor ++ * corresponding to curr_frame+1, the descriptor corresponding to frame 2 ++ * will be fetched. If the number of descriptors is max=64 (or greather) the ++ * list will be fully programmed with Active descriptors and it is possible ++ * case(rare) that the latest descriptor(considering rollback) corresponding ++ * to frame 2 will be serviced first. HS case is more probable because, in fact, ++ * up to 11 uframes(16 in the code) may be skipped. ++ */ ++ if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) { ++ /* ++ * Consider uframe counter also, to start xfer asap. ++ * If half of the frame elapsed skip 2 frames otherwise ++ * just 1 frame. ++ * Starting descriptor index must be 8-aligned, so ++ * if the current frame is near to complete the next one ++ * is skipped as well. ++ */ ++ ++ if (dwc_micro_frame_num(hcd->frame_number) >= 5) { ++ *skip_frames = 2 * 8; ++ frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames); ++ } else { ++ *skip_frames = 1 * 8; ++ frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames); ++ } ++ ++ frame = dwc_full_frame_num(frame); ++ } else { ++ /* ++ * Two frames are skipped for FS - the current and the next. ++ * But for descriptor programming, 1 frame(descriptor) is enough, ++ * see example above. ++ */ ++ *skip_frames = 1; ++ frame = dwc_frame_num_inc(hcd->frame_number, 2); ++ } ++ ++ return frame; ++} ++ ++/* ++ * Calculate initial descriptor index for isochronous transfer ++ * based on scheduled frame. ++ */ ++static uint8_t recalc_initial_desc_idx(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ uint16_t frame = 0, fr_idx, fr_idx_tmp; ++ uint8_t skip_frames = 0; ++ /* ++ * With current ISOC processing algorithm the channel is being ++ * released when no more QTDs in the list(qh->ntd == 0). ++ * Thus this function is called only when qh->ntd == 0 and qh->channel == 0. ++ * ++ * So qh->channel != NULL branch is not used and just not removed from the ++ * source file. It is required for another possible approach which is, ++ * do not disable and release the channel when ISOC session completed, ++ * just move QH to inactive schedule until new QTD arrives. ++ * On new QTD, the QH moved back to 'ready' schedule, ++ * starting frame and therefore starting desc_index are recalculated. ++ * In this case channel is released only on ep_disable. ++ */ ++ ++ /* Calculate starting descriptor index. For INTERRUPT endpoint it is always 0. */ ++ if (qh->channel) { ++ frame = calc_starting_frame(hcd, qh, &skip_frames); ++ /* ++ * Calculate initial descriptor index based on FrameList current bitmap ++ * and servicing period. ++ */ ++ fr_idx_tmp = frame_list_idx(frame); ++ fr_idx = ++ (MAX_FRLIST_EN_NUM + frame_list_idx(qh->sched_frame) - ++ fr_idx_tmp) ++ % frame_incr_val(qh); ++ fr_idx = (fr_idx + fr_idx_tmp) % MAX_FRLIST_EN_NUM; ++ } else { ++ qh->sched_frame = calc_starting_frame(hcd, qh, &skip_frames); ++ fr_idx = frame_list_idx(qh->sched_frame); ++ } ++ ++ qh->td_first = qh->td_last = frame_to_desc_idx(qh, fr_idx); ++ ++ return skip_frames; ++} ++ ++#define ISOC_URB_GIVEBACK_ASAP ++ ++#define MAX_ISOC_XFER_SIZE_FS 1023 ++#define MAX_ISOC_XFER_SIZE_HS 3072 ++#define DESCNUM_THRESHOLD 4 ++ ++static void init_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, ++ uint8_t skip_frames) ++{ ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ dwc_otg_qtd_t *qtd; ++ dwc_otg_host_dma_desc_t *dma_desc; ++ uint16_t idx, inc, n_desc, ntd_max, max_xfer_size; ++ ++ idx = qh->td_last; ++ inc = qh->interval; ++ n_desc = 0; ++ ++ ntd_max = (max_desc_num(qh) + qh->interval - 1) / qh->interval; ++ if (skip_frames && !qh->channel) ++ ntd_max = ntd_max - skip_frames / qh->interval; ++ ++ max_xfer_size = ++ (qh->dev_speed == ++ DWC_OTG_EP_SPEED_HIGH) ? MAX_ISOC_XFER_SIZE_HS : ++ MAX_ISOC_XFER_SIZE_FS; ++ ++ DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) { ++ while ((qh->ntd < ntd_max) ++ && (qtd->isoc_frame_index_last < ++ qtd->urb->packet_count)) { ++ ++ dma_desc = &qh->desc_list[idx]; ++ dwc_memset(dma_desc, 0x00, sizeof(dwc_otg_host_dma_desc_t)); ++ ++ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index_last]; ++ ++ if (frame_desc->length > max_xfer_size) ++ qh->n_bytes[idx] = max_xfer_size; ++ else ++ qh->n_bytes[idx] = frame_desc->length; ++ dma_desc->status.b_isoc.n_bytes = qh->n_bytes[idx]; ++ dma_desc->status.b_isoc.a = 1; ++ dma_desc->status.b_isoc.sts = 0; ++ ++ dma_desc->buf = qtd->urb->dma + frame_desc->offset; ++ ++ qh->ntd++; ++ ++ qtd->isoc_frame_index_last++; ++ ++#ifdef ISOC_URB_GIVEBACK_ASAP ++ /* ++ * Set IOC for each descriptor corresponding to the ++ * last frame of the URB. ++ */ ++ if (qtd->isoc_frame_index_last == ++ qtd->urb->packet_count) ++ dma_desc->status.b_isoc.ioc = 1; ++ ++#endif ++ idx = desclist_idx_inc(idx, inc, qh->dev_speed); ++ n_desc++; ++ ++ } ++ qtd->in_process = 1; ++ } ++ ++ qh->td_last = idx; ++ ++#ifdef ISOC_URB_GIVEBACK_ASAP ++ /* Set IOC for the last descriptor if descriptor list is full */ ++ if (qh->ntd == ntd_max) { ++ idx = desclist_idx_dec(qh->td_last, inc, qh->dev_speed); ++ qh->desc_list[idx].status.b_isoc.ioc = 1; ++ } ++#else ++ /* ++ * Set IOC bit only for one descriptor. ++ * Always try to be ahead of HW processing, ++ * i.e. on IOC generation driver activates next descriptors but ++ * core continues to process descriptors followed the one with IOC set. ++ */ ++ ++ if (n_desc > DESCNUM_THRESHOLD) { ++ /* ++ * Move IOC "up". Required even if there is only one QTD ++ * in the list, cause QTDs migth continue to be queued, ++ * but during the activation it was only one queued. ++ * Actually more than one QTD might be in the list if this function called ++ * from XferCompletion - QTDs was queued during HW processing of the previous ++ * descriptor chunk. ++ */ ++ idx = dwc_desclist_idx_dec(idx, inc * ((qh->ntd + 1) / 2), qh->dev_speed); ++ } else { ++ /* ++ * Set the IOC for the latest descriptor ++ * if either number of descriptor is not greather than threshold ++ * or no more new descriptors activated. ++ */ ++ idx = dwc_desclist_idx_dec(qh->td_last, inc, qh->dev_speed); ++ } ++ ++ qh->desc_list[idx].status.b_isoc.ioc = 1; ++#endif ++} ++ ++static void init_non_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ ++ dwc_hc_t *hc; ++ dwc_otg_host_dma_desc_t *dma_desc; ++ dwc_otg_qtd_t *qtd; ++ int num_packets, len, n_desc = 0; ++ ++ hc = qh->channel; ++ ++ /* ++ * Start with hc->xfer_buff initialized in ++ * assign_and_init_hc(), then if SG transfer consists of multiple URBs, ++ * this pointer re-assigned to the buffer of the currently processed QTD. ++ * For non-SG request there is always one QTD active. ++ */ ++ ++ DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) { ++ ++ if (n_desc) { ++ /* SG request - more than 1 QTDs */ ++ hc->xfer_buff = (uint8_t *)qtd->urb->dma + qtd->urb->actual_length; ++ hc->xfer_len = qtd->urb->length - qtd->urb->actual_length; ++ } ++ ++ qtd->n_desc = 0; ++ ++ do { ++ dma_desc = &qh->desc_list[n_desc]; ++ len = hc->xfer_len; ++ ++ if (len > MAX_DMA_DESC_SIZE) ++ len = MAX_DMA_DESC_SIZE - hc->max_packet + 1; ++ ++ if (hc->ep_is_in) { ++ if (len > 0) { ++ num_packets = (len + hc->max_packet - 1) / hc->max_packet; ++ } else { ++ /* Need 1 packet for transfer length of 0. */ ++ num_packets = 1; ++ } ++ /* Always program an integral # of max packets for IN transfers. */ ++ len = num_packets * hc->max_packet; ++ } ++ ++ dma_desc->status.b.n_bytes = len; ++ ++ qh->n_bytes[n_desc] = len; ++ ++ if ((qh->ep_type == UE_CONTROL) ++ && (qtd->control_phase == DWC_OTG_CONTROL_SETUP)) ++ dma_desc->status.b.sup = 1; /* Setup Packet */ ++ ++ dma_desc->status.b.a = 1; /* Active descriptor */ ++ dma_desc->status.b.sts = 0; ++ ++ dma_desc->buf = ++ ((unsigned long)hc->xfer_buff & 0xffffffff); ++ ++ /* ++ * Last descriptor(or single) of IN transfer ++ * with actual size less than MaxPacket. ++ */ ++ if (len > hc->xfer_len) { ++ hc->xfer_len = 0; ++ } else { ++ hc->xfer_buff += len; ++ hc->xfer_len -= len; ++ } ++ ++ qtd->n_desc++; ++ n_desc++; ++ } ++ while ((hc->xfer_len > 0) && (n_desc != MAX_DMA_DESC_NUM_GENERIC)); ++ ++ ++ qtd->in_process = 1; ++ ++ if (qh->ep_type == UE_CONTROL) ++ break; ++ ++ if (n_desc == MAX_DMA_DESC_NUM_GENERIC) ++ break; ++ } ++ ++ if (n_desc) { ++ /* Request Transfer Complete interrupt for the last descriptor */ ++ qh->desc_list[n_desc - 1].status.b.ioc = 1; ++ /* End of List indicator */ ++ qh->desc_list[n_desc - 1].status.b.eol = 1; ++ ++ hc->ntd = n_desc; ++ } ++} ++ ++/** ++ * For Control and Bulk endpoints initializes descriptor list ++ * and starts the transfer. ++ * ++ * For Interrupt and Isochronous endpoints initializes descriptor list ++ * then updates FrameList, marking appropriate entries as active. ++ * In case of Isochronous, the starting descriptor index is calculated based ++ * on the scheduled frame, but only on the first transfer descriptor within a session. ++ * Then starts the transfer via enabling the channel. ++ * For Isochronous endpoint the channel is not halted on XferComplete ++ * interrupt so remains assigned to the endpoint(QH) until session is done. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh The QH to init. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ /* Channel is already assigned */ ++ dwc_hc_t *hc = qh->channel; ++ uint8_t skip_frames = 0; ++ ++ switch (hc->ep_type) { ++ case DWC_OTG_EP_TYPE_CONTROL: ++ case DWC_OTG_EP_TYPE_BULK: ++ init_non_isoc_dma_desc(hcd, qh); ++ ++ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); ++ break; ++ case DWC_OTG_EP_TYPE_INTR: ++ init_non_isoc_dma_desc(hcd, qh); ++ ++ update_frame_list(hcd, qh, 1); ++ ++ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); ++ break; ++ case DWC_OTG_EP_TYPE_ISOC: ++ ++ if (!qh->ntd) ++ skip_frames = recalc_initial_desc_idx(hcd, qh); ++ ++ init_isoc_dma_desc(hcd, qh, skip_frames); ++ ++ if (!hc->xfer_started) { ++ ++ update_frame_list(hcd, qh, 1); ++ ++ /* ++ * Always set to max, instead of actual size. ++ * Otherwise ntd will be changed with ++ * channel being enabled. Not recommended. ++ * ++ */ ++ hc->ntd = max_desc_num(qh); ++ /* Enable channel only once for ISOC */ ++ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); ++ } ++ ++ break; ++ default: ++ ++ break; ++ } ++} ++ ++static void complete_isoc_xfer_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_halt_status_e halt_status) ++{ ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ dwc_otg_qtd_t *qtd, *qtd_tmp; ++ dwc_otg_qh_t *qh; ++ dwc_otg_host_dma_desc_t *dma_desc; ++ uint16_t idx, remain; ++ uint8_t urb_compl; ++ ++ qh = hc->qh; ++ idx = qh->td_first; ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) ++ qtd->in_process = 0; ++ return; ++ } else if ((halt_status == DWC_OTG_HC_XFER_AHB_ERR) || ++ (halt_status == DWC_OTG_HC_XFER_BABBLE_ERR)) { ++ /* ++ * Channel is halted in these error cases. ++ * Considered as serious issues. ++ * Complete all URBs marking all frames as failed, ++ * irrespective whether some of the descriptors(frames) succeeded or no. ++ * Pass error code to completion routine as well, to ++ * update urb->status, some of class drivers might use it to stop ++ * queing transfer requests. ++ */ ++ int err = (halt_status == DWC_OTG_HC_XFER_AHB_ERR) ++ ? (-DWC_E_IO) ++ : (-DWC_E_OVERFLOW); ++ ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { ++ for (idx = 0; idx < qtd->urb->packet_count; idx++) { ++ frame_desc = &qtd->urb->iso_descs[idx]; ++ frame_desc->status = err; ++ } ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, err); ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ } ++ return; ++ } ++ ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { ++ ++ if (!qtd->in_process) ++ break; ++ ++ urb_compl = 0; ++ ++ do { ++ ++ dma_desc = &qh->desc_list[idx]; ++ ++ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ remain = hc->ep_is_in ? dma_desc->status.b_isoc.n_bytes : 0; ++ ++ if (dma_desc->status.b_isoc.sts == DMA_DESC_STS_PKTERR) { ++ /* ++ * XactError or, unable to complete all the transactions ++ * in the scheduled micro-frame/frame, ++ * both indicated by DMA_DESC_STS_PKTERR. ++ */ ++ qtd->urb->error_count++; ++ frame_desc->actual_length = qh->n_bytes[idx] - remain; ++ frame_desc->status = -DWC_E_PROTOCOL; ++ } else { ++ /* Success */ ++ ++ frame_desc->actual_length = qh->n_bytes[idx] - remain; ++ frame_desc->status = 0; ++ } ++ ++ if (++qtd->isoc_frame_index == qtd->urb->packet_count) { ++ /* ++ * urb->status is not used for isoc transfers here. ++ * The individual frame_desc status are used instead. ++ */ ++ ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ ++ /* ++ * This check is necessary because urb_dequeue can be called ++ * from urb complete callback(sound driver example). ++ * All pending URBs are dequeued there, so no need for ++ * further processing. ++ */ ++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { ++ return; ++ } ++ ++ urb_compl = 1; ++ ++ } ++ ++ qh->ntd--; ++ ++ /* Stop if IOC requested descriptor reached */ ++ if (dma_desc->status.b_isoc.ioc) { ++ idx = desclist_idx_inc(idx, qh->interval, hc->speed); ++ goto stop_scan; ++ } ++ ++ idx = desclist_idx_inc(idx, qh->interval, hc->speed); ++ ++ if (urb_compl) ++ break; ++ } ++ while (idx != qh->td_first); ++ } ++stop_scan: ++ qh->td_first = idx; ++} ++ ++uint8_t update_non_isoc_urb_state_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_host_dma_desc_t * dma_desc, ++ dwc_otg_halt_status_e halt_status, ++ uint32_t n_bytes, uint8_t * xfer_done) ++{ ++ ++ uint16_t remain = hc->ep_is_in ? dma_desc->status.b.n_bytes : 0; ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ ++ if (halt_status == DWC_OTG_HC_XFER_AHB_ERR) { ++ urb->status = -DWC_E_IO; ++ return 1; ++ } ++ if (dma_desc->status.b.sts == DMA_DESC_STS_PKTERR) { ++ switch (halt_status) { ++ case DWC_OTG_HC_XFER_STALL: ++ urb->status = -DWC_E_PIPE; ++ break; ++ case DWC_OTG_HC_XFER_BABBLE_ERR: ++ urb->status = -DWC_E_OVERFLOW; ++ break; ++ case DWC_OTG_HC_XFER_XACT_ERR: ++ urb->status = -DWC_E_PROTOCOL; ++ break; ++ default: ++ DWC_ERROR("%s: Unhandled descriptor error status (%d)\n", __func__, ++ halt_status); ++ break; ++ } ++ return 1; ++ } ++ ++ if (dma_desc->status.b.a == 1) { ++ DWC_DEBUGPL(DBG_HCDV, ++ "Active descriptor encountered on channel %d\n", ++ hc->hc_num); ++ return 0; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL) { ++ if (qtd->control_phase == DWC_OTG_CONTROL_DATA) { ++ urb->actual_length += n_bytes - remain; ++ if (remain || urb->actual_length == urb->length) { ++ /* ++ * For Control Data stage do not set urb->status=0 to prevent ++ * URB callback. Set it when Status phase done. See below. ++ */ ++ *xfer_done = 1; ++ } ++ ++ } else if (qtd->control_phase == DWC_OTG_CONTROL_STATUS) { ++ urb->status = 0; ++ *xfer_done = 1; ++ } ++ /* No handling for SETUP stage */ ++ } else { ++ /* BULK and INTR */ ++ urb->actual_length += n_bytes - remain; ++ if (remain || urb->actual_length == urb->length) { ++ urb->status = 0; ++ *xfer_done = 1; ++ } ++ } ++ ++ return 0; ++} ++ ++static void complete_non_isoc_xfer_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_halt_status_e halt_status) ++{ ++ dwc_otg_hcd_urb_t *urb = NULL; ++ dwc_otg_qtd_t *qtd, *qtd_tmp; ++ dwc_otg_qh_t *qh; ++ dwc_otg_host_dma_desc_t *dma_desc; ++ uint32_t n_bytes, n_desc, i; ++ uint8_t failed = 0, xfer_done; ++ ++ n_desc = 0; ++ ++ qh = hc->qh; ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { ++ qtd->in_process = 0; ++ } ++ return; ++ } ++ ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) { ++ ++ urb = qtd->urb; ++ ++ n_bytes = 0; ++ xfer_done = 0; ++ ++ for (i = 0; i < qtd->n_desc; i++) { ++ dma_desc = &qh->desc_list[n_desc]; ++ ++ n_bytes = qh->n_bytes[n_desc]; ++ ++ failed = ++ update_non_isoc_urb_state_ddma(hcd, hc, qtd, ++ dma_desc, ++ halt_status, n_bytes, ++ &xfer_done); ++ ++ if (failed ++ || (xfer_done ++ && (urb->status != -DWC_E_IN_PROGRESS))) { ++ ++ hcd->fops->complete(hcd, urb->priv, urb, ++ urb->status); ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ ++ if (failed) ++ goto stop_scan; ++ } else if (qh->ep_type == UE_CONTROL) { ++ if (qtd->control_phase == DWC_OTG_CONTROL_SETUP) { ++ if (urb->length > 0) { ++ qtd->control_phase = DWC_OTG_CONTROL_DATA; ++ } else { ++ qtd->control_phase = DWC_OTG_CONTROL_STATUS; ++ } ++ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction done\n"); ++ } else if (qtd->control_phase == DWC_OTG_CONTROL_DATA) { ++ if (xfer_done) { ++ qtd->control_phase = DWC_OTG_CONTROL_STATUS; ++ DWC_DEBUGPL(DBG_HCDV, " Control data transfer done\n"); ++ } else if (i + 1 == qtd->n_desc) { ++ /* ++ * Last descriptor for Control data stage which is ++ * not completed yet. ++ */ ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ } ++ } ++ } ++ ++ n_desc++; ++ } ++ ++ } ++ ++stop_scan: ++ ++ if (qh->ep_type != UE_CONTROL) { ++ /* ++ * Resetting the data toggle for bulk ++ * and interrupt endpoints in case of stall. See handle_hc_stall_intr() ++ */ ++ if (halt_status == DWC_OTG_HC_XFER_STALL) ++ qh->data_toggle = DWC_OTG_HC_PID_DATA0; ++ else ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ } ++ ++ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { ++ hcint_data_t hcint; ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ if (hcint.b.nyet) { ++ /* ++ * Got a NYET on the last transaction of the transfer. It ++ * means that the endpoint should be in the PING state at the ++ * beginning of the next transfer. ++ */ ++ qh->ping_state = 1; ++ clear_hc_int(hc_regs, nyet); ++ } ++ ++ } ++ ++} ++ ++/** ++ * This function is called from interrupt handlers. ++ * Scans the descriptor list, updates URB's status and ++ * calls completion routine for the URB if it's done. ++ * Releases the channel to be used by other transfers. ++ * In case of Isochronous endpoint the channel is not halted until ++ * the end of the session, i.e. QTD list is empty. ++ * If periodic channel released the FrameList is updated accordingly. ++ * ++ * Calls transaction selection routines to activate pending transfers. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param hc Host channel, the transfer is completed on. ++ * @param hc_regs Host channel registers. ++ * @param halt_status Reason the channel is being halted, ++ * or just XferComplete for isochronous transfer ++ */ ++void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_halt_status_e halt_status) ++{ ++ uint8_t continue_isoc_xfer = 0; ++ dwc_otg_transaction_type_e tr_type; ++ dwc_otg_qh_t *qh = hc->qh; ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ ++ complete_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status); ++ ++ /* Release the channel if halted or session completed */ ++ if (halt_status != DWC_OTG_HC_XFER_COMPLETE || ++ DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ ++ /* Halt the channel if session completed */ ++ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { ++ dwc_otg_hc_halt(hcd->core_if, hc, halt_status); ++ } ++ ++ release_channel_ddma(hcd, qh); ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ } else { ++ /* Keep in assigned schedule to continue transfer */ ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, ++ &qh->qh_list_entry); ++ continue_isoc_xfer = 1; ++ ++ } ++ /** @todo Consider the case when period exceeds FrameList size. ++ * Frame Rollover interrupt should be used. ++ */ ++ } else { ++ /* Scan descriptor list to complete the URB(s), then release the channel */ ++ complete_non_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status); ++ ++ release_channel_ddma(hcd, qh); ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ ++ if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ /* Add back to inactive non-periodic schedule on normal completion */ ++ dwc_otg_hcd_qh_add(hcd, qh); ++ } ++ ++ } ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE || continue_isoc_xfer) { ++ if (continue_isoc_xfer) { ++ if (tr_type == DWC_OTG_TRANSACTION_NONE) { ++ tr_type = DWC_OTG_TRANSACTION_PERIODIC; ++ } else if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC) { ++ tr_type = DWC_OTG_TRANSACTION_ALL; ++ } ++ } ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ } ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h +@@ -0,0 +1,417 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_if.h $ ++ * $Revision: #12 $ ++ * $Date: 2011/10/26 $ ++ * $Change: 1873028 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++#ifndef __DWC_HCD_IF_H__ ++#define __DWC_HCD_IF_H__ ++ ++#include "dwc_otg_core_if.h" ++ ++/** @file ++ * This file defines DWC_OTG HCD Core API. ++ */ ++ ++struct dwc_otg_hcd; ++typedef struct dwc_otg_hcd dwc_otg_hcd_t; ++ ++struct dwc_otg_hcd_urb; ++typedef struct dwc_otg_hcd_urb dwc_otg_hcd_urb_t; ++ ++/** @name HCD Function Driver Callbacks */ ++/** @{ */ ++ ++/** This function is called whenever core switches to host mode. */ ++typedef int (*dwc_otg_hcd_start_cb_t) (dwc_otg_hcd_t * hcd); ++ ++/** This function is called when device has been disconnected */ ++typedef int (*dwc_otg_hcd_disconnect_cb_t) (dwc_otg_hcd_t * hcd); ++ ++/** Wrapper provides this function to HCD to core, so it can get hub information to which device is connected */ ++typedef int (*dwc_otg_hcd_hub_info_from_urb_cb_t) (dwc_otg_hcd_t * hcd, ++ void *urb_handle, ++ uint32_t * hub_addr, ++ uint32_t * port_addr); ++/** Via this function HCD core gets device speed */ ++typedef int (*dwc_otg_hcd_speed_from_urb_cb_t) (dwc_otg_hcd_t * hcd, ++ void *urb_handle); ++ ++/** This function is called when urb is completed */ ++typedef int (*dwc_otg_hcd_complete_urb_cb_t) (dwc_otg_hcd_t * hcd, ++ void *urb_handle, ++ dwc_otg_hcd_urb_t * dwc_otg_urb, ++ int32_t status); ++ ++/** Via this function HCD core gets b_hnp_enable parameter */ ++typedef int (*dwc_otg_hcd_get_b_hnp_enable) (dwc_otg_hcd_t * hcd); ++ ++struct dwc_otg_hcd_function_ops { ++ dwc_otg_hcd_start_cb_t start; ++ dwc_otg_hcd_disconnect_cb_t disconnect; ++ dwc_otg_hcd_hub_info_from_urb_cb_t hub_info; ++ dwc_otg_hcd_speed_from_urb_cb_t speed; ++ dwc_otg_hcd_complete_urb_cb_t complete; ++ dwc_otg_hcd_get_b_hnp_enable get_b_hnp_enable; ++}; ++/** @} */ ++ ++/** @name HCD Core API */ ++/** @{ */ ++/** This function allocates dwc_otg_hcd structure and returns pointer on it. */ ++extern dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void); ++ ++/** This function should be called to initiate HCD Core. ++ * ++ * @param hcd The HCD ++ * @param core_if The DWC_OTG Core ++ * ++ * Returns -DWC_E_NO_MEMORY if no enough memory. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if); ++ ++/** Frees HCD ++ * ++ * @param hcd The HCD ++ */ ++extern void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd); ++ ++/** This function should be called on every hardware interrupt. ++ * ++ * @param dwc_otg_hcd The HCD ++ * ++ * Returns non zero if interrupt is handled ++ * Return 0 if interrupt is not handled ++ */ ++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd); ++ ++/** This function is used to handle the fast interrupt ++ * ++ */ ++extern void __attribute__ ((naked)) dwc_otg_hcd_handle_fiq(void); ++ ++/** ++ * Returns private data set by ++ * dwc_otg_hcd_set_priv_data function. ++ * ++ * @param hcd The HCD ++ */ ++extern void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Set private data. ++ * ++ * @param hcd The HCD ++ * @param priv_data pointer to be stored in private data ++ */ ++extern void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data); ++ ++/** ++ * This function initializes the HCD Core. ++ * ++ * @param hcd The HCD ++ * @param fops The Function Driver Operations data structure containing pointers to all callbacks. ++ * ++ * Returns -DWC_E_NO_DEVICE if Core is currently is in device mode. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd, ++ struct dwc_otg_hcd_function_ops *fops); ++ ++/** ++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are ++ * stopped. ++ * ++ * @param hcd The HCD ++ */ ++extern void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Handles hub class-specific requests. ++ * ++ * @param dwc_otg_hcd The HCD ++ * @param typeReq Request Type ++ * @param wValue wValue from control request ++ * @param wIndex wIndex from control request ++ * @param buf data buffer ++ * @param wLength data buffer length ++ * ++ * Returns -DWC_E_INVALID if invalid argument is passed ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd, ++ uint16_t typeReq, uint16_t wValue, ++ uint16_t wIndex, uint8_t * buf, ++ uint16_t wLength); ++ ++/** ++ * Returns otg port number. ++ * ++ * @param hcd The HCD ++ */ ++extern uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Returns OTG version - either 1.3 or 2.0. ++ * ++ * @param core_if The core_if structure pointer ++ */ ++extern uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if); ++ ++/** ++ * Returns 1 if currently core is acting as B host, and 0 otherwise. ++ * ++ * @param hcd The HCD ++ */ ++extern uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Returns current frame number. ++ * ++ * @param hcd The HCD ++ */ ++extern int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Dumps hcd state. ++ * ++ * @param hcd The HCD ++ */ ++extern void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Dump the average frame remaining at SOF. This can be used to ++ * determine average interrupt latency. Frame remaining is also shown for ++ * start transfer and two additional sample points. ++ * Currently this function is not implemented. ++ * ++ * @param hcd The HCD ++ */ ++extern void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd); ++ ++/** ++ * Sends LPM transaction to the local device. ++ * ++ * @param hcd The HCD ++ * @param devaddr Device Address ++ * @param hird Host initiated resume duration ++ * @param bRemoteWake Value of bRemoteWake field in LPM transaction ++ * ++ * Returns negative value if sending LPM transaction was not succeeded. ++ * Returns 0 on success. ++ */ ++extern int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr, ++ uint8_t hird, uint8_t bRemoteWake); ++ ++/* URB interface */ ++ ++/** ++ * Allocates memory for dwc_otg_hcd_urb structure. ++ * Allocated memory should be freed by call of DWC_FREE. ++ * ++ * @param hcd The HCD ++ * @param iso_desc_count Count of ISOC descriptors ++ * @param atomic_alloc Specefies whether to perform atomic allocation. ++ */ ++extern dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd, ++ int iso_desc_count, ++ int atomic_alloc); ++ ++/** ++ * Set pipe information in URB. ++ * ++ * @param hcd_urb DWC_OTG URB ++ * @param devaddr Device Address ++ * @param ep_num Endpoint Number ++ * @param ep_type Endpoint Type ++ * @param ep_dir Endpoint Direction ++ * @param mps Max Packet Size ++ */ ++extern void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * hcd_urb, ++ uint8_t devaddr, uint8_t ep_num, ++ uint8_t ep_type, uint8_t ep_dir, ++ uint16_t mps); ++ ++/* Transfer flags */ ++#define URB_GIVEBACK_ASAP 0x1 ++#define URB_SEND_ZERO_PACKET 0x2 ++ ++/** ++ * Sets dwc_otg_hcd_urb parameters. ++ * ++ * @param urb DWC_OTG URB allocated by dwc_otg_hcd_urb_alloc function. ++ * @param urb_handle Unique handle for request, this will be passed back ++ * to function driver in completion callback. ++ * @param buf The buffer for the data ++ * @param dma The DMA buffer for the data ++ * @param buflen Transfer length ++ * @param sp Buffer for setup data ++ * @param sp_dma DMA address of setup data buffer ++ * @param flags Transfer flags ++ * @param interval Polling interval for interrupt or isochronous transfers. ++ */ ++extern void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * urb, ++ void *urb_handle, void *buf, ++ dwc_dma_t dma, uint32_t buflen, void *sp, ++ dwc_dma_t sp_dma, uint32_t flags, ++ uint16_t interval); ++ ++/** Gets status from dwc_otg_hcd_urb ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb); ++ ++/** Gets actual length from dwc_otg_hcd_urb ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t * ++ dwc_otg_urb); ++ ++/** Gets error count from dwc_otg_hcd_urb. Only for ISOC URBs ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t * ++ dwc_otg_urb); ++ ++/** Set ISOC descriptor offset and length ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ * @param desc_num ISOC descriptor number ++ * @param offset Offset from beginig of buffer. ++ * @param length Transaction length ++ */ ++extern void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb, ++ int desc_num, uint32_t offset, ++ uint32_t length); ++ ++/** Get status of ISOC descriptor, specified by desc_num ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ * @param desc_num ISOC descriptor number ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t * ++ dwc_otg_urb, int desc_num); ++ ++/** Get actual length of ISOC descriptor, specified by desc_num ++ * ++ * @param dwc_otg_urb DWC_OTG URB ++ * @param desc_num ISOC descriptor number ++ */ ++extern uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t * ++ dwc_otg_urb, ++ int desc_num); ++ ++/** Queue URB. After transfer is completes, the complete callback will be called with the URB status ++ * ++ * @param dwc_otg_hcd The HCD ++ * @param dwc_otg_urb DWC_OTG URB ++ * @param ep_handle Out parameter for returning endpoint handle ++ * @param atomic_alloc Flag to do atomic allocation if needed ++ * ++ * Returns -DWC_E_NO_DEVICE if no device is connected. ++ * Returns -DWC_E_NO_MEMORY if there is no enough memory. ++ * Returns 0 on success. ++ */ ++extern int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * dwc_otg_hcd, ++ dwc_otg_hcd_urb_t * dwc_otg_urb, ++ void **ep_handle, int atomic_alloc); ++ ++/** De-queue the specified URB ++ * ++ * @param dwc_otg_hcd The HCD ++ * @param dwc_otg_urb DWC_OTG URB ++ */ ++extern int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * dwc_otg_hcd, ++ dwc_otg_hcd_urb_t * dwc_otg_urb); ++ ++/** Frees resources in the DWC_otg controller related to a given endpoint. ++ * Any URBs for the endpoint must already be dequeued. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function ++ * @param retry Number of retries if there are queued transfers. ++ * ++ * Returns -DWC_E_INVALID if invalid arguments are passed. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle, ++ int retry); ++ ++/* Resets the data toggle in qh structure. This function can be called from ++ * usb_clear_halt routine. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function ++ * ++ * Returns -DWC_E_INVALID if invalid arguments are passed. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle); ++ ++/** Returns 1 if status of specified port is changed and 0 otherwise. ++ * ++ * @param hcd The HCD ++ * @param port Port number ++ */ ++extern int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port); ++ ++/** Call this function to check if bandwidth was allocated for specified endpoint. ++ * Only for ISOC and INTERRUPT endpoints. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle ++ */ ++extern int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd, ++ void *ep_handle); ++ ++/** Call this function to check if bandwidth was freed for specified endpoint. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle ++ */ ++extern int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle); ++ ++/** Returns bandwidth allocated for specified endpoint in microseconds. ++ * Only for ISOC and INTERRUPT endpoints. ++ * ++ * @param hcd The HCD ++ * @param ep_handle Endpoint handle ++ */ ++extern uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd, ++ void *ep_handle); ++ ++/** @} */ ++ ++#endif /* __DWC_HCD_IF_H__ */ ++#endif /* DWC_DEVICE_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c +@@ -0,0 +1,2727 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $ ++ * $Revision: #89 $ ++ * $Date: 2011/10/20 $ ++ * $Change: 1869487 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++ ++#include ++#include ++ ++ ++extern bool microframe_schedule; ++ ++/** @file ++ * This file contains the implementation of the HCD Interrupt handlers. ++ */ ++ ++int fiq_done, int_done; ++ ++#ifdef FIQ_DEBUG ++char buffer[1000*16]; ++int wptr; ++void notrace _fiq_print(FIQDBG_T dbg_lvl, char *fmt, ...) ++{ ++ FIQDBG_T dbg_lvl_req = FIQDBG_PORTHUB; ++ va_list args; ++ char text[17]; ++ hfnum_data_t hfnum = { .d32 = FIQ_READ(dwc_regs_base + 0x408) }; ++ ++ if(dbg_lvl & dbg_lvl_req || dbg_lvl == FIQDBG_ERR) ++ { ++ local_fiq_disable(); ++ snprintf(text, 9, "%4d%d:%d ", hfnum.b.frnum/8, hfnum.b.frnum%8, 8 - hfnum.b.frrem/937); ++ va_start(args, fmt); ++ vsnprintf(text+8, 9, fmt, args); ++ va_end(args); ++ ++ memcpy(buffer + wptr, text, 16); ++ wptr = (wptr + 16) % sizeof(buffer); ++ local_fiq_enable(); ++ } ++} ++#endif ++ ++/** This function handles interrupts for the HCD. */ ++int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ int retval = 0; ++ static int last_time; ++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; ++ gintsts_data_t gintsts; ++ gintmsk_data_t gintmsk; ++ hfnum_data_t hfnum; ++ haintmsk_data_t haintmsk; ++ ++#ifdef DEBUG ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ ++#endif ++ ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); ++ ++ /* Exit from ISR if core is hibernated */ ++ if (core_if->hibernation_suspend == 1) { ++ goto exit_handler_routine; ++ } ++ DWC_SPINLOCK(dwc_otg_hcd->lock); ++ /* Check if HOST Mode */ ++ if (dwc_otg_is_host_mode(core_if)) { ++ if (fiq_enable) { ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock); ++ /* Pull in from the FIQ's disabled mask */ ++ gintmsk.d32 = gintmsk.d32 | ~(dwc_otg_hcd->fiq_state->gintmsk_saved.d32); ++ dwc_otg_hcd->fiq_state->gintmsk_saved.d32 = ~0; ++ } ++ ++ if (fiq_fsm_enable && ( 0x0000FFFF & ~(dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint))) { ++ gintsts.b.hcintr = 1; ++ } ++ ++ /* Danger will robinson: fake a SOF if necessary */ ++ if (fiq_fsm_enable && (dwc_otg_hcd->fiq_state->gintmsk_saved.b.sofintr == 1)) { ++ gintsts.b.sofintr = 1; ++ } ++ gintsts.d32 &= gintmsk.d32; ++ ++ if (fiq_enable) { ++ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } ++ ++ if (!gintsts.d32) { ++ goto exit_handler_routine; ++ } ++ ++#ifdef DEBUG ++ // We should be OK doing this because the common interrupts should already have been serviced ++ /* Don't print debug message in the interrupt handler on SOF */ ++#ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++#endif ++ DWC_DEBUGPL(DBG_HCDI, "\n"); ++#endif ++ ++#ifdef DEBUG ++#ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++#endif ++ DWC_DEBUGPL(DBG_HCDI, ++ "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x core_if=%p\n", ++ gintsts.d32, core_if); ++#endif ++ hfnum.d32 = DWC_READ_REG32(&dwc_otg_hcd->core_if->host_if->host_global_regs->hfnum); ++ if (gintsts.b.sofintr) { ++ retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd); ++ } ++ ++ if (gintsts.b.rxstsqlvl) { ++ retval |= ++ dwc_otg_hcd_handle_rx_status_q_level_intr ++ (dwc_otg_hcd); ++ } ++ if (gintsts.b.nptxfempty) { ++ retval |= ++ dwc_otg_hcd_handle_np_tx_fifo_empty_intr ++ (dwc_otg_hcd); ++ } ++ if (gintsts.b.i2cintr) { ++ /** @todo Implement i2cintr handler. */ ++ } ++ if (gintsts.b.portintr) { ++ ++ gintmsk_data_t gintmsk = { .b.portintr = 1}; ++ retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd); ++ if (fiq_enable) { ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock); ++ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0, gintmsk.d32); ++ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } else { ++ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0, gintmsk.d32); ++ } ++ } ++ if (gintsts.b.hcintr) { ++ retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd); ++ } ++ if (gintsts.b.ptxfempty) { ++ retval |= ++ dwc_otg_hcd_handle_perio_tx_fifo_empty_intr ++ (dwc_otg_hcd); ++ } ++#ifdef DEBUG ++#ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++#endif ++ { ++ DWC_DEBUGPL(DBG_HCDI, ++ "DWC OTG HCD Finished Servicing Interrupts\n"); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n", ++ DWC_READ_REG32(&global_regs->gintsts)); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n", ++ DWC_READ_REG32(&global_regs->gintmsk)); ++ } ++#endif ++ ++#ifdef DEBUG ++#ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++#endif ++ DWC_DEBUGPL(DBG_HCDI, "\n"); ++#endif ++ ++ } ++ ++exit_handler_routine: ++ if (fiq_enable) { ++ gintmsk_data_t gintmsk_new; ++ haintmsk_data_t haintmsk_new; ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock); ++ gintmsk_new.d32 = *(volatile uint32_t *)&dwc_otg_hcd->fiq_state->gintmsk_saved.d32; ++ if(fiq_fsm_enable) ++ haintmsk_new.d32 = *(volatile uint32_t *)&dwc_otg_hcd->fiq_state->haintmsk_saved.d32; ++ else ++ haintmsk_new.d32 = 0x0000FFFF; ++ ++ /* The FIQ could have sneaked another interrupt in. If so, don't clear MPHI */ ++ if ((gintmsk_new.d32 == ~0) && (haintmsk_new.d32 == 0x0000FFFF)) { ++ DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.intstat, (1<<16)); ++ if (dwc_otg_hcd->fiq_state->mphi_int_count >= 50) { ++ fiq_print(FIQDBG_INT, dwc_otg_hcd->fiq_state, "MPHI CLR"); ++ DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl, ((1<<31) + (1<<16))); ++ while (!(DWC_READ_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & (1 << 17))) ++ ; ++ DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl, (1<<31)); ++ dwc_otg_hcd->fiq_state->mphi_int_count = 0; ++ } ++ int_done++; ++ } ++ haintmsk.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk); ++ /* Re-enable interrupts that the FIQ masked (first time round) */ ++ FIQ_WRITE(dwc_otg_hcd->fiq_state->dwc_regs_base + GINTMSK, gintmsk.d32); ++ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock); ++ local_fiq_enable(); ++ ++ if ((jiffies / HZ) > last_time) { ++ //dwc_otg_qh_t *qh; ++ //dwc_list_link_t *cur; ++ /* Once a second output the fiq and irq numbers, useful for debug */ ++ last_time = jiffies / HZ; ++ // DWC_WARN("np_kick=%d AHC=%d sched_frame=%d cur_frame=%d int_done=%d fiq_done=%d", ++ // dwc_otg_hcd->fiq_state->kick_np_queues, dwc_otg_hcd->available_host_channels, ++ // dwc_otg_hcd->fiq_state->next_sched_frame, hfnum.b.frnum, int_done, dwc_otg_hcd->fiq_state->fiq_done); ++ //printk(KERN_WARNING "Periodic queues:\n"); ++ } ++ } ++ ++ DWC_SPINUNLOCK(dwc_otg_hcd->lock); ++ return retval; ++} ++ ++#ifdef DWC_TRACK_MISSED_SOFS ++ ++#warning Compiling code to track missed SOFs ++#define FRAME_NUM_ARRAY_SIZE 1000 ++/** ++ * This function is for debug only. ++ */ ++static inline void track_missed_sofs(uint16_t curr_frame_number) ++{ ++ static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE]; ++ static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE]; ++ static int frame_num_idx = 0; ++ static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM; ++ static int dumped_frame_num_array = 0; ++ ++ if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) { ++ if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != ++ curr_frame_number) { ++ frame_num_array[frame_num_idx] = curr_frame_number; ++ last_frame_num_array[frame_num_idx++] = last_frame_num; ++ } ++ } else if (!dumped_frame_num_array) { ++ int i; ++ DWC_PRINTF("Frame Last Frame\n"); ++ DWC_PRINTF("----- ----------\n"); ++ for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) { ++ DWC_PRINTF("0x%04x 0x%04x\n", ++ frame_num_array[i], last_frame_num_array[i]); ++ } ++ dumped_frame_num_array = 1; ++ } ++ last_frame_num = curr_frame_number; ++} ++#endif ++ ++/** ++ * Handles the start-of-frame interrupt in host mode. Non-periodic ++ * transactions may be queued to the DWC_otg controller for the current ++ * (micro)frame. Periodic transactions may be queued to the controller for the ++ * next (micro)frame. ++ */ ++int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * hcd) ++{ ++ hfnum_data_t hfnum; ++ gintsts_data_t gintsts = { .d32 = 0 }; ++ dwc_list_link_t *qh_entry; ++ dwc_otg_qh_t *qh; ++ dwc_otg_transaction_type_e tr_type; ++ int did_something = 0; ++ int32_t next_sched_frame = -1; ++ ++ hfnum.d32 = ++ DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum); ++ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n"); ++#endif ++ hcd->frame_number = hfnum.b.frnum; ++ ++#ifdef DEBUG ++ hcd->frrem_accum += hfnum.b.frrem; ++ hcd->frrem_samples++; ++#endif ++ ++#ifdef DWC_TRACK_MISSED_SOFS ++ track_missed_sofs(hcd->frame_number); ++#endif ++ /* Determine whether any periodic QHs should be executed. */ ++ qh_entry = DWC_LIST_FIRST(&hcd->periodic_sched_inactive); ++ while (qh_entry != &hcd->periodic_sched_inactive) { ++ qh = DWC_LIST_ENTRY(qh_entry, dwc_otg_qh_t, qh_list_entry); ++ qh_entry = qh_entry->next; ++ if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) { ++ ++ /* ++ * Move QH to the ready list to be executed next ++ * (micro)frame. ++ */ ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready, ++ &qh->qh_list_entry); ++ ++ did_something = 1; ++ } ++ else ++ { ++ if(next_sched_frame < 0 || dwc_frame_num_le(qh->sched_frame, next_sched_frame)) ++ { ++ next_sched_frame = qh->sched_frame; ++ } ++ } ++ } ++ if (fiq_enable) ++ hcd->fiq_state->next_sched_frame = next_sched_frame; ++ ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE) { ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ did_something = 1; ++ } ++ ++ /* Clear interrupt - but do not trample on the FIQ sof */ ++ if (!fiq_fsm_enable) { ++ gintsts.b.sofintr = 1; ++ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32); ++ } ++ return 1; ++} ++ ++/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at ++ * least one packet in the Rx FIFO. The packets are moved from the FIFO to ++ * memory if the DWC_otg controller is operating in Slave mode. */ ++int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ host_grxsts_data_t grxsts; ++ dwc_hc_t *hc = NULL; ++ ++ DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n"); ++ ++ grxsts.d32 = ++ DWC_READ_REG32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp); ++ ++ hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum]; ++ if (!hc) { ++ DWC_ERROR("Unable to get corresponding channel\n"); ++ return 0; ++ } ++ ++ /* Packet Status */ ++ DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum); ++ DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt); ++ DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, ++ hc->data_pid_start); ++ DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts); ++ ++ switch (grxsts.b.pktsts) { ++ case DWC_GRXSTS_PKTSTS_IN: ++ /* Read the data into the host buffer. */ ++ if (grxsts.b.bcnt > 0) { ++ dwc_otg_read_packet(dwc_otg_hcd->core_if, ++ hc->xfer_buff, grxsts.b.bcnt); ++ ++ /* Update the HC fields for the next packet received. */ ++ hc->xfer_count += grxsts.b.bcnt; ++ hc->xfer_buff += grxsts.b.bcnt; ++ } ++ ++ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: ++ case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR: ++ case DWC_GRXSTS_PKTSTS_CH_HALTED: ++ /* Handled in interrupt, just ignore data */ ++ break; ++ default: ++ DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", ++ grxsts.b.pktsts); ++ break; ++ } ++ ++ return 1; ++} ++ ++/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More ++ * data packets may be written to the FIFO for OUT transfers. More requests ++ * may be written to the non-periodic request queue for IN transfers. This ++ * interrupt is enabled only in Slave mode. */ ++int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n"); ++ dwc_otg_hcd_queue_transactions(dwc_otg_hcd, ++ DWC_OTG_TRANSACTION_NON_PERIODIC); ++ return 1; ++} ++ ++/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data ++ * packets may be written to the FIFO for OUT transfers. More requests may be ++ * written to the periodic request queue for IN transfers. This interrupt is ++ * enabled only in Slave mode. */ ++int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n"); ++ dwc_otg_hcd_queue_transactions(dwc_otg_hcd, ++ DWC_OTG_TRANSACTION_PERIODIC); ++ return 1; ++} ++ ++/** There are multiple conditions that can cause a port interrupt. This function ++ * determines which interrupt conditions have occurred and handles them ++ * appropriately. */ ++int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ int retval = 0; ++ hprt0_data_t hprt0; ++ hprt0_data_t hprt0_modify; ++ ++ hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); ++ hprt0_modify.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); ++ ++ /* Clear appropriate bits in HPRT0 to clear the interrupt bit in ++ * GINTSTS */ ++ ++ hprt0_modify.b.prtena = 0; ++ hprt0_modify.b.prtconndet = 0; ++ hprt0_modify.b.prtenchng = 0; ++ hprt0_modify.b.prtovrcurrchng = 0; ++ ++ /* Port Connect Detected ++ * Set flag and clear if detected */ ++ if (dwc_otg_hcd->core_if->hibernation_suspend == 1) { ++ // Dont modify port status if we are in hibernation state ++ hprt0_modify.b.prtconndet = 1; ++ hprt0_modify.b.prtenchng = 1; ++ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32); ++ hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); ++ return retval; ++ } ++ ++ if (hprt0.b.prtconndet) { ++ /** @todo - check if steps performed in 'else' block should be perfromed regardles adp */ ++ if (dwc_otg_hcd->core_if->adp_enable && ++ dwc_otg_hcd->core_if->adp.vbuson_timer_started == 1) { ++ DWC_PRINTF("PORT CONNECT DETECTED ----------------\n"); ++ DWC_TIMER_CANCEL(dwc_otg_hcd->core_if->adp.vbuson_timer); ++ dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0; ++ /* TODO - check if this is required, as ++ * host initialization was already performed ++ * after initial ADP probing ++ */ ++ /*dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0; ++ dwc_otg_core_init(dwc_otg_hcd->core_if); ++ dwc_otg_enable_global_interrupts(dwc_otg_hcd->core_if); ++ cil_hcd_start(dwc_otg_hcd->core_if);*/ ++ } else { ++ ++ DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x " ++ "Port Connect Detected--\n", hprt0.d32); ++ dwc_otg_hcd->flags.b.port_connect_status_change = 1; ++ dwc_otg_hcd->flags.b.port_connect_status = 1; ++ hprt0_modify.b.prtconndet = 1; ++ ++ /* B-Device has connected, Delete the connection timer. */ ++ DWC_TIMER_CANCEL(dwc_otg_hcd->conn_timer); ++ } ++ /* The Hub driver asserts a reset when it sees port connect ++ * status change flag */ ++ retval |= 1; ++ } ++ ++ /* Port Enable Changed ++ * Clear if detected - Set internal flag if disabled */ ++ if (hprt0.b.prtenchng) { ++ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " ++ "Port Enable Changed--\n", hprt0.d32); ++ hprt0_modify.b.prtenchng = 1; ++ if (hprt0.b.prtena == 1) { ++ hfir_data_t hfir; ++ int do_reset = 0; ++ dwc_otg_core_params_t *params = ++ dwc_otg_hcd->core_if->core_params; ++ dwc_otg_core_global_regs_t *global_regs = ++ dwc_otg_hcd->core_if->core_global_regs; ++ dwc_otg_host_if_t *host_if = ++ dwc_otg_hcd->core_if->host_if; ++ ++ /* Every time when port enables calculate ++ * HFIR.FrInterval ++ */ ++ hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir); ++ hfir.b.frint = calc_frame_interval(dwc_otg_hcd->core_if); ++ DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32); ++ ++ /* Check if we need to adjust the PHY clock speed for ++ * low power and adjust it */ ++ if (params->host_support_fs_ls_low_power) { ++ gusbcfg_data_t usbcfg; ++ ++ usbcfg.d32 = ++ DWC_READ_REG32(&global_regs->gusbcfg); ++ ++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED ++ || hprt0.b.prtspd == ++ DWC_HPRT0_PRTSPD_FULL_SPEED) { ++ /* ++ * Low power ++ */ ++ hcfg_data_t hcfg; ++ if (usbcfg.b.phylpwrclksel == 0) { ++ /* Set PHY low power clock select for FS/LS devices */ ++ usbcfg.b.phylpwrclksel = 1; ++ DWC_WRITE_REG32 ++ (&global_regs->gusbcfg, ++ usbcfg.d32); ++ do_reset = 1; ++ } ++ ++ hcfg.d32 = ++ DWC_READ_REG32 ++ (&host_if->host_global_regs->hcfg); ++ ++ if (hprt0.b.prtspd == ++ DWC_HPRT0_PRTSPD_LOW_SPEED ++ && params->host_ls_low_power_phy_clk ++ == ++ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) ++ { ++ /* 6 MHZ */ ++ DWC_DEBUGPL(DBG_CIL, ++ "FS_PHY programming HCFG to 6 MHz (Low Power)\n"); ++ if (hcfg.b.fslspclksel != ++ DWC_HCFG_6_MHZ) { ++ hcfg.b.fslspclksel = ++ DWC_HCFG_6_MHZ; ++ DWC_WRITE_REG32 ++ (&host_if->host_global_regs->hcfg, ++ hcfg.d32); ++ do_reset = 1; ++ } ++ } else { ++ /* 48 MHZ */ ++ DWC_DEBUGPL(DBG_CIL, ++ "FS_PHY programming HCFG to 48 MHz ()\n"); ++ if (hcfg.b.fslspclksel != ++ DWC_HCFG_48_MHZ) { ++ hcfg.b.fslspclksel = ++ DWC_HCFG_48_MHZ; ++ DWC_WRITE_REG32 ++ (&host_if->host_global_regs->hcfg, ++ hcfg.d32); ++ do_reset = 1; ++ } ++ } ++ } else { ++ /* ++ * Not low power ++ */ ++ if (usbcfg.b.phylpwrclksel == 1) { ++ usbcfg.b.phylpwrclksel = 0; ++ DWC_WRITE_REG32 ++ (&global_regs->gusbcfg, ++ usbcfg.d32); ++ do_reset = 1; ++ } ++ } ++ ++ if (do_reset) { ++ DWC_TASK_SCHEDULE(dwc_otg_hcd->reset_tasklet); ++ } ++ } ++ ++ if (!do_reset) { ++ /* Port has been enabled set the reset change flag */ ++ dwc_otg_hcd->flags.b.port_reset_change = 1; ++ } ++ } else { ++ dwc_otg_hcd->flags.b.port_enable_change = 1; ++ } ++ retval |= 1; ++ } ++ ++ /** Overcurrent Change Interrupt */ ++ if (hprt0.b.prtovrcurrchng) { ++ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " ++ "Port Overcurrent Changed--\n", hprt0.d32); ++ dwc_otg_hcd->flags.b.port_over_current_change = 1; ++ hprt0_modify.b.prtovrcurrchng = 1; ++ retval |= 1; ++ } ++ ++ /* Clear Port Interrupts */ ++ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32); ++ ++ return retval; ++} ++ ++/** This interrupt indicates that one or more host channels has a pending ++ * interrupt. There are multiple conditions that can cause each host channel ++ * interrupt. This function determines which conditions have occurred for each ++ * host channel interrupt and handles them appropriately. */ ++int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ int i; ++ int retval = 0; ++ haint_data_t haint = { .d32 = 0 } ; ++ ++ /* Clear appropriate bits in HCINTn to clear the interrupt bit in ++ * GINTSTS */ ++ ++ if (!fiq_fsm_enable) ++ haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if); ++ ++ // Overwrite with saved interrupts from fiq handler ++ if(fiq_fsm_enable) ++ { ++ /* check the mask? */ ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock); ++ haint.b2.chint |= ~(dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint); ++ dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint = ~0; ++ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } ++ ++ for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) { ++ if (haint.b2.chint & (1 << i)) { ++ retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i); ++ } ++ } ++ ++ return retval; ++} ++ ++/** ++ * Gets the actual length of a transfer after the transfer halts. _halt_status ++ * holds the reason for the halt. ++ * ++ * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE, ++ * *short_read is set to 1 upon return if less than the requested ++ * number of bytes were transferred. Otherwise, *short_read is set to 0 upon ++ * return. short_read may also be NULL on entry, in which case it remains ++ * unchanged. ++ */ ++static uint32_t get_actual_xfer_length(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status, ++ int *short_read) ++{ ++ hctsiz_data_t hctsiz; ++ uint32_t length; ++ ++ if (short_read != NULL) { ++ *short_read = 0; ++ } ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ ++ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { ++ if (hc->ep_is_in) { ++ length = hc->xfer_len - hctsiz.b.xfersize; ++ if (short_read != NULL) { ++ *short_read = (hctsiz.b.xfersize != 0); ++ } ++ } else if (hc->qh->do_split) { ++ //length = split_out_xfersize[hc->hc_num]; ++ length = qtd->ssplit_out_xfer_count; ++ } else { ++ length = hc->xfer_len; ++ } ++ } else { ++ /* ++ * Must use the hctsiz.pktcnt field to determine how much data ++ * has been transferred. This field reflects the number of ++ * packets that have been transferred via the USB. This is ++ * always an integral number of packets if the transfer was ++ * halted before its normal completion. (Can't use the ++ * hctsiz.xfersize field because that reflects the number of ++ * bytes transferred via the AHB, not the USB). ++ */ ++ length = ++ (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet; ++ } ++ ++ return length; ++} ++ ++/** ++ * Updates the state of the URB after a Transfer Complete interrupt on the ++ * host channel. Updates the actual_length field of the URB based on the ++ * number of bytes transferred via the host channel. Sets the URB status ++ * if the data transfer is finished. ++ * ++ * @return 1 if the data transfer specified by the URB is completely finished, ++ * 0 otherwise. ++ */ ++static int update_urb_state_xfer_comp(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_hcd_urb_t * urb, ++ dwc_otg_qtd_t * qtd) ++{ ++ int xfer_done = 0; ++ int short_read = 0; ++ ++ int xfer_length; ++ ++ xfer_length = get_actual_xfer_length(hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_COMPLETE, ++ &short_read); ++ ++ if (urb->actual_length + xfer_length > urb->length) { ++ printk_once(KERN_DEBUG "dwc_otg: DEVICE:%03d : %s:%d:trimming xfer length\n", ++ hc->dev_addr, __func__, __LINE__); ++ xfer_length = urb->length - urb->actual_length; ++ } ++ ++ /* non DWORD-aligned buffer case handling. */ ++ if (hc->align_buff && xfer_length && hc->ep_is_in) { ++ dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf, ++ xfer_length); ++ } ++ ++ urb->actual_length += xfer_length; ++ ++ if (xfer_length && (hc->ep_type == DWC_OTG_EP_TYPE_BULK) && ++ (urb->flags & URB_SEND_ZERO_PACKET) ++ && (urb->actual_length == urb->length) ++ && !(urb->length % hc->max_packet)) { ++ xfer_done = 0; ++ } else if (short_read || urb->actual_length >= urb->length) { ++ xfer_done = 1; ++ urb->status = 0; ++ } ++ ++#ifdef DEBUG ++ { ++ hctsiz_data_t hctsiz; ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", ++ __func__, (hc->ep_is_in ? "IN" : "OUT"), ++ hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", hc->xfer_len); ++ DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", ++ hctsiz.b.xfersize); ++ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", ++ urb->length); ++ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", ++ urb->actual_length); ++ DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n", ++ short_read, xfer_done); ++ } ++#endif ++ ++ return xfer_done; ++} ++ ++/* ++ * Save the starting data toggle for the next transfer. The data toggle is ++ * saved in the QH for non-control transfers and it's saved in the QTD for ++ * control transfers. ++ */ ++void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, dwc_otg_qtd_t * qtd) ++{ ++ hctsiz_data_t hctsiz; ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ ++ if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) { ++ dwc_otg_qh_t *qh = hc->qh; ++ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { ++ qh->data_toggle = DWC_OTG_HC_PID_DATA0; ++ } else { ++ qh->data_toggle = DWC_OTG_HC_PID_DATA1; ++ } ++ } else { ++ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { ++ qtd->data_toggle = DWC_OTG_HC_PID_DATA0; ++ } else { ++ qtd->data_toggle = DWC_OTG_HC_PID_DATA1; ++ } ++ } ++} ++ ++/** ++ * Updates the state of an Isochronous URB when the transfer is stopped for ++ * any reason. The fields of the current entry in the frame descriptor array ++ * are set based on the transfer state and the input _halt_status. Completes ++ * the Isochronous URB if all the URB frames have been completed. ++ * ++ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be ++ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE. ++ */ ++static dwc_otg_halt_status_e ++update_isoc_urb_state(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status) ++{ ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ dwc_otg_halt_status_e ret_val = halt_status; ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ ++ frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; ++ switch (halt_status) { ++ case DWC_OTG_HC_XFER_COMPLETE: ++ frame_desc->status = 0; ++ frame_desc->actual_length = ++ get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL); ++ ++ /* non DWORD-aligned buffer case handling. */ ++ if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) { ++ dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset, ++ hc->qh->dw_align_buf, frame_desc->actual_length); ++ } ++ ++ break; ++ case DWC_OTG_HC_XFER_FRAME_OVERRUN: ++ urb->error_count++; ++ if (hc->ep_is_in) { ++ frame_desc->status = -DWC_E_NO_STREAM_RES; ++ } else { ++ frame_desc->status = -DWC_E_COMMUNICATION; ++ } ++ frame_desc->actual_length = 0; ++ break; ++ case DWC_OTG_HC_XFER_BABBLE_ERR: ++ urb->error_count++; ++ frame_desc->status = -DWC_E_OVERFLOW; ++ /* Don't need to update actual_length in this case. */ ++ break; ++ case DWC_OTG_HC_XFER_XACT_ERR: ++ urb->error_count++; ++ frame_desc->status = -DWC_E_PROTOCOL; ++ frame_desc->actual_length = ++ get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL); ++ ++ /* non DWORD-aligned buffer case handling. */ ++ if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) { ++ dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset, ++ hc->qh->dw_align_buf, frame_desc->actual_length); ++ } ++ /* Skip whole frame */ ++ if (hc->qh->do_split && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && ++ hc->ep_is_in && hcd->core_if->dma_enable) { ++ qtd->complete_split = 0; ++ qtd->isoc_split_offset = 0; ++ } ++ ++ break; ++ default: ++ DWC_ASSERT(1, "Unhandled _halt_status (%d)\n", halt_status); ++ break; ++ } ++ if (++qtd->isoc_frame_index == urb->packet_count) { ++ /* ++ * urb->status is not used for isoc transfers. ++ * The individual frame_desc statuses are used instead. ++ */ ++ hcd->fops->complete(hcd, urb->priv, urb, 0); ++ ret_val = DWC_OTG_HC_XFER_URB_COMPLETE; ++ } else { ++ ret_val = DWC_OTG_HC_XFER_COMPLETE; ++ } ++ return ret_val; ++} ++ ++/** ++ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic ++ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are ++ * still linked to the QH, the QH is added to the end of the inactive ++ * non-periodic schedule. For periodic QHs, removes the QH from the periodic ++ * schedule if no more QTDs are linked to the QH. ++ */ ++static void deactivate_qh(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, int free_qtd) ++{ ++ int continue_split = 0; ++ dwc_otg_qtd_t *qtd; ++ ++ DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd); ++ ++ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); ++ ++ if (qtd->complete_split) { ++ continue_split = 1; ++ } else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID || ++ qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) { ++ continue_split = 1; ++ } ++ ++ if (free_qtd) { ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); ++ continue_split = 0; ++ } ++ ++ qh->channel = NULL; ++ dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split); ++} ++ ++/** ++ * Releases a host channel for use by other transfers. Attempts to select and ++ * queue more transactions since at least one host channel is available. ++ * ++ * @param hcd The HCD state structure. ++ * @param hc The host channel to release. ++ * @param qtd The QTD associated with the host channel. This QTD may be freed ++ * if the transfer is complete or an error has occurred. ++ * @param halt_status Reason the channel is being released. This status ++ * determines the actions taken by this function. ++ */ ++static void release_channel(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ dwc_otg_transaction_type_e tr_type; ++ int free_qtd; ++ dwc_irqflags_t flags; ++ dwc_spinlock_t *channel_lock = hcd->channel_lock; ++ ++ int hog_port = 0; ++ ++ DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d, xfer_len %d\n", ++ __func__, hc->hc_num, halt_status, hc->xfer_len); ++ ++ if(fiq_fsm_enable && hc->do_split) { ++ if(!hc->ep_is_in && hc->ep_type == UE_ISOCHRONOUS) { ++ if(hc->xact_pos == DWC_HCSPLIT_XACTPOS_MID || ++ hc->xact_pos == DWC_HCSPLIT_XACTPOS_BEGIN) { ++ hog_port = 0; ++ } ++ } ++ } ++ ++ switch (halt_status) { ++ case DWC_OTG_HC_XFER_URB_COMPLETE: ++ free_qtd = 1; ++ break; ++ case DWC_OTG_HC_XFER_AHB_ERR: ++ case DWC_OTG_HC_XFER_STALL: ++ case DWC_OTG_HC_XFER_BABBLE_ERR: ++ free_qtd = 1; ++ break; ++ case DWC_OTG_HC_XFER_XACT_ERR: ++ if (qtd->error_count >= 3) { ++ DWC_DEBUGPL(DBG_HCDV, ++ " Complete URB with transaction error\n"); ++ free_qtd = 1; ++ qtd->urb->status = -DWC_E_PROTOCOL; ++ hcd->fops->complete(hcd, qtd->urb->priv, ++ qtd->urb, -DWC_E_PROTOCOL); ++ } else { ++ free_qtd = 0; ++ } ++ break; ++ case DWC_OTG_HC_XFER_URB_DEQUEUE: ++ /* ++ * The QTD has already been removed and the QH has been ++ * deactivated. Don't want to do anything except release the ++ * host channel and try to queue more transfers. ++ */ ++ goto cleanup; ++ case DWC_OTG_HC_XFER_NO_HALT_STATUS: ++ free_qtd = 0; ++ break; ++ case DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE: ++ DWC_DEBUGPL(DBG_HCDV, ++ " Complete URB with I/O error\n"); ++ free_qtd = 1; ++ qtd->urb->status = -DWC_E_IO; ++ hcd->fops->complete(hcd, qtd->urb->priv, ++ qtd->urb, -DWC_E_IO); ++ break; ++ default: ++ free_qtd = 0; ++ break; ++ } ++ ++ deactivate_qh(hcd, hc->qh, free_qtd); ++ ++cleanup: ++ /* ++ * Release the host channel for use by other transfers. The cleanup ++ * function clears the channel interrupt enables and conditions, so ++ * there's no need to clear the Channel Halted interrupt separately. ++ */ ++ if (fiq_fsm_enable && hcd->fiq_state->channel[hc->hc_num].fsm != FIQ_PASSTHROUGH) ++ dwc_otg_cleanup_fiq_channel(hcd, hc->hc_num); ++ dwc_otg_hc_cleanup(hcd->core_if, hc); ++ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); ++ ++ if (!microframe_schedule) { ++ switch (hc->ep_type) { ++ case DWC_OTG_EP_TYPE_CONTROL: ++ case DWC_OTG_EP_TYPE_BULK: ++ hcd->non_periodic_channels--; ++ break; ++ ++ default: ++ /* ++ * Don't release reservations for periodic channels here. ++ * That's done when a periodic transfer is descheduled (i.e. ++ * when the QH is removed from the periodic schedule). ++ */ ++ break; ++ } ++ } else { ++ ++ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); ++ hcd->available_host_channels++; ++ fiq_print(FIQDBG_INT, hcd->fiq_state, "AHC = %d ", hcd->available_host_channels); ++ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); ++ } ++ ++ /* Try to queue more transfers now that there's a free channel. */ ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE) { ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ } ++} ++ ++/** ++ * Halts a host channel. If the channel cannot be halted immediately because ++ * the request queue is full, this function ensures that the FIFO empty ++ * interrupt for the appropriate queue is enabled so that the halt request can ++ * be queued when there is space in the request queue. ++ * ++ * This function may also be called in DMA mode. In that case, the channel is ++ * simply released since the core always halts the channel automatically in ++ * DMA mode. ++ */ ++static void halt_channel(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status) ++{ ++ if (hcd->core_if->dma_enable) { ++ release_channel(hcd, hc, qtd, halt_status); ++ return; ++ } ++ ++ /* Slave mode processing... */ ++ dwc_otg_hc_halt(hcd->core_if, hc, halt_status); ++ ++ if (hc->halt_on_queue) { ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ dwc_otg_core_global_regs_t *global_regs; ++ global_regs = hcd->core_if->core_global_regs; ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || ++ hc->ep_type == DWC_OTG_EP_TYPE_BULK) { ++ /* ++ * Make sure the Non-periodic Tx FIFO empty interrupt ++ * is enabled so that the non-periodic schedule will ++ * be processed. ++ */ ++ gintmsk.b.nptxfempty = 1; ++ if (fiq_enable) { ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&hcd->fiq_state->lock); ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); ++ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } else { ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); ++ } ++ } else { ++ /* ++ * Move the QH from the periodic queued schedule to ++ * the periodic assigned schedule. This allows the ++ * halt to be queued when the periodic schedule is ++ * processed. ++ */ ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, ++ &hc->qh->qh_list_entry); ++ ++ /* ++ * Make sure the Periodic Tx FIFO Empty interrupt is ++ * enabled so that the periodic schedule will be ++ * processed. ++ */ ++ gintmsk.b.ptxfempty = 1; ++ if (fiq_enable) { ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&hcd->fiq_state->lock); ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); ++ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } else { ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); ++ } ++ } ++ } ++} ++ ++/** ++ * Performs common cleanup for non-periodic transfers after a Transfer ++ * Complete interrupt. This function should be called after any endpoint type ++ * specific handling is finished to release the host channel. ++ */ ++static void complete_non_periodic_xfer(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ hcint_data_t hcint; ++ ++ qtd->error_count = 0; ++ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ if (hcint.b.nyet) { ++ /* ++ * Got a NYET on the last transaction of the transfer. This ++ * means that the endpoint should be in the PING state at the ++ * beginning of the next transfer. ++ */ ++ hc->qh->ping_state = 1; ++ clear_hc_int(hc_regs, nyet); ++ } ++ ++ /* ++ * Always halt and release the host channel to make it available for ++ * more transfers. There may still be more phases for a control ++ * transfer or more data packets for a bulk transfer at this point, ++ * but the host channel is still halted. A channel will be reassigned ++ * to the transfer when the non-periodic schedule is processed after ++ * the channel is released. This allows transactions to be queued ++ * properly via dwc_otg_hcd_queue_transactions, which also enables the ++ * Tx FIFO Empty interrupt if necessary. ++ */ ++ if (hc->ep_is_in) { ++ /* ++ * IN transfers in Slave mode require an explicit disable to ++ * halt the channel. (In DMA mode, this call simply releases ++ * the channel.) ++ */ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } else { ++ /* ++ * The channel is automatically disabled by the core for OUT ++ * transfers in Slave mode. ++ */ ++ release_channel(hcd, hc, qtd, halt_status); ++ } ++} ++ ++/** ++ * Performs common cleanup for periodic transfers after a Transfer Complete ++ * interrupt. This function should be called after any endpoint type specific ++ * handling is finished to release the host channel. ++ */ ++static void complete_periodic_xfer(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ hctsiz_data_t hctsiz; ++ qtd->error_count = 0; ++ ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) { ++ /* Core halts channel in these cases. */ ++ release_channel(hcd, hc, qtd, halt_status); ++ } else { ++ /* Flush any outstanding requests from the Tx queue. */ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++} ++ ++static int32_t handle_xfercomp_isoc_split_in(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ uint32_t len; ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc; ++ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ ++ len = get_actual_xfer_length(hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_COMPLETE, NULL); ++ ++ if (!len) { ++ qtd->complete_split = 0; ++ qtd->isoc_split_offset = 0; ++ return 0; ++ } ++ frame_desc->actual_length += len; ++ ++ if (hc->align_buff && len) ++ dwc_memcpy(qtd->urb->buf + frame_desc->offset + ++ qtd->isoc_split_offset, hc->qh->dw_align_buf, len); ++ qtd->isoc_split_offset += len; ++ ++ if (frame_desc->length == frame_desc->actual_length) { ++ frame_desc->status = 0; ++ qtd->isoc_frame_index++; ++ qtd->complete_split = 0; ++ qtd->isoc_split_offset = 0; ++ } ++ ++ if (qtd->isoc_frame_index == qtd->urb->packet_count) { ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ } ++ ++ return 1; /* Indicates that channel released */ ++} ++ ++/** ++ * Handles a host channel Transfer Complete interrupt. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ int urb_xfer_done; ++ dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); ++ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Transfer Complete--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, halt_status); ++ if (pipe_type == UE_ISOCHRONOUS) { ++ /* Do not disable the interrupt, just clear it */ ++ clear_hc_int(hc_regs, xfercomp); ++ return 1; ++ } ++ goto handle_xfercomp_done; ++ } ++ ++ /* ++ * Handle xfer complete on CSPLIT. ++ */ ++ ++ if (hc->qh->do_split) { ++ if ((hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && hc->ep_is_in ++ && hcd->core_if->dma_enable) { ++ if (qtd->complete_split ++ && handle_xfercomp_isoc_split_in(hcd, hc, hc_regs, ++ qtd)) ++ goto handle_xfercomp_done; ++ } else { ++ qtd->complete_split = 0; ++ } ++ } ++ ++ /* Update the QTD and URB states. */ ++ switch (pipe_type) { ++ case UE_CONTROL: ++ switch (qtd->control_phase) { ++ case DWC_OTG_CONTROL_SETUP: ++ if (urb->length > 0) { ++ qtd->control_phase = DWC_OTG_CONTROL_DATA; ++ } else { ++ qtd->control_phase = DWC_OTG_CONTROL_STATUS; ++ } ++ DWC_DEBUGPL(DBG_HCDV, ++ " Control setup transaction done\n"); ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ break; ++ case DWC_OTG_CONTROL_DATA:{ ++ urb_xfer_done = ++ update_urb_state_xfer_comp(hc, hc_regs, urb, ++ qtd); ++ if (urb_xfer_done) { ++ qtd->control_phase = ++ DWC_OTG_CONTROL_STATUS; ++ DWC_DEBUGPL(DBG_HCDV, ++ " Control data transfer done\n"); ++ } else { ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ } ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ break; ++ } ++ case DWC_OTG_CONTROL_STATUS: ++ DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n"); ++ if (urb->status == -DWC_E_IN_PROGRESS) { ++ urb->status = 0; ++ } ++ hcd->fops->complete(hcd, urb->priv, urb, urb->status); ++ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; ++ break; ++ } ++ ++ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ case UE_BULK: ++ DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n"); ++ urb_xfer_done = ++ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); ++ if (urb_xfer_done) { ++ hcd->fops->complete(hcd, urb->priv, urb, urb->status); ++ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; ++ } else { ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ } ++ ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ case UE_INTERRUPT: ++ DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n"); ++ urb_xfer_done = ++ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); ++ ++ /* ++ * Interrupt URB is done on the first transfer complete ++ * interrupt. ++ */ ++ if (urb_xfer_done) { ++ hcd->fops->complete(hcd, urb->priv, urb, urb->status); ++ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; ++ } else { ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ } ++ ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ case UE_ISOCHRONOUS: ++ DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n"); ++ if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) { ++ halt_status = ++ update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_COMPLETE); ++ } ++ complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ } ++ ++handle_xfercomp_done: ++ disable_hc_int(hc_regs, xfercompl); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel STALL interrupt. This handler may be called in ++ * either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_stall_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); ++ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "STALL Received--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, DWC_OTG_HC_XFER_STALL); ++ goto handle_stall_done; ++ } ++ ++ if (pipe_type == UE_CONTROL) { ++ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE); ++ } ++ ++ if (pipe_type == UE_BULK || pipe_type == UE_INTERRUPT) { ++ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE); ++ /* ++ * USB protocol requires resetting the data toggle for bulk ++ * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT) ++ * setup command is issued to the endpoint. Anticipate the ++ * CLEAR_FEATURE command since a STALL has occurred and reset ++ * the data toggle now. ++ */ ++ hc->qh->data_toggle = 0; ++ } ++ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL); ++ ++handle_stall_done: ++ disable_hc_int(hc_regs, stall); ++ ++ return 1; ++} ++ ++/* ++ * Updates the state of the URB when a transfer has been stopped due to an ++ * abnormal condition before the transfer completes. Modifies the ++ * actual_length field of the URB to reflect the number of bytes that have ++ * actually been transferred via the host channel. ++ */ ++static void update_urb_state_xfer_intr(dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_hcd_urb_t * urb, ++ dwc_otg_qtd_t * qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd, ++ halt_status, NULL); ++ ++ if (urb->actual_length + bytes_transferred > urb->length) { ++ printk_once(KERN_DEBUG "dwc_otg: DEVICE:%03d : %s:%d:trimming xfer length\n", ++ hc->dev_addr, __func__, __LINE__); ++ bytes_transferred = urb->length - urb->actual_length; ++ } ++ ++ /* non DWORD-aligned buffer case handling. */ ++ if (hc->align_buff && bytes_transferred && hc->ep_is_in) { ++ dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf, ++ bytes_transferred); ++ } ++ ++ urb->actual_length += bytes_transferred; ++ ++#ifdef DEBUG ++ { ++ hctsiz_data_t hctsiz; ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", ++ __func__, (hc->ep_is_in ? "IN" : "OUT"), ++ hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " hc->start_pkt_count %d\n", ++ hc->start_pkt_count); ++ DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt); ++ DWC_DEBUGPL(DBG_HCDV, " hc->max_packet %d\n", hc->max_packet); ++ DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n", ++ bytes_transferred); ++ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", ++ urb->actual_length); ++ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", ++ urb->length); ++ } ++#endif ++} ++ ++/** ++ * Handles a host channel NAK interrupt. This handler may be called in either ++ * DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_nak_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "NAK Received--\n", hc->hc_num); ++ ++ /* ++ * When we get bulk NAKs then remember this so we holdoff on this qh until ++ * the beginning of the next frame ++ */ ++ switch(dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { ++ case UE_BULK: ++ case UE_CONTROL: ++ if (nak_holdoff && qtd->qh->do_split) ++ hc->qh->nak_frame = dwc_otg_hcd_get_frame_number(hcd); ++ } ++ ++ /* ++ * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and ++ * interrupt. Re-start the SSPLIT transfer. ++ */ ++ if (hc->do_split) { ++ if (hc->complete_split) { ++ qtd->error_count = 0; ++ } ++ qtd->complete_split = 0; ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); ++ goto handle_nak_done; ++ } ++ ++ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { ++ case UE_CONTROL: ++ case UE_BULK: ++ if (hcd->core_if->dma_enable && hc->ep_is_in) { ++ /* ++ * NAK interrupts are enabled on bulk/control IN ++ * transfers in DMA mode for the sole purpose of ++ * resetting the error count after a transaction error ++ * occurs. The core will continue transferring data. ++ * Disable other interrupts unmasked for the same ++ * reason. ++ */ ++ disable_hc_int(hc_regs, datatglerr); ++ disable_hc_int(hc_regs, ack); ++ qtd->error_count = 0; ++ goto handle_nak_done; ++ } ++ ++ /* ++ * NAK interrupts normally occur during OUT transfers in DMA ++ * or Slave mode. For IN transfers, more requests will be ++ * queued as request queue space is available. ++ */ ++ qtd->error_count = 0; ++ ++ if (!hc->qh->ping_state) { ++ update_urb_state_xfer_intr(hc, hc_regs, ++ qtd->urb, qtd, ++ DWC_OTG_HC_XFER_NAK); ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ ++ if (hc->speed == DWC_OTG_EP_SPEED_HIGH) ++ hc->qh->ping_state = 1; ++ } ++ ++ /* ++ * Halt the channel so the transfer can be re-started from ++ * the appropriate point or the PING protocol will ++ * start/continue. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); ++ break; ++ case UE_INTERRUPT: ++ qtd->error_count = 0; ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); ++ break; ++ case UE_ISOCHRONOUS: ++ /* Should never get called for isochronous transfers. */ ++ DWC_ASSERT(1, "NACK interrupt for ISOC transfer\n"); ++ break; ++ } ++ ++handle_nak_done: ++ disable_hc_int(hc_regs, nak); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel ACK interrupt. This interrupt is enabled when ++ * performing the PING protocol in Slave mode, when errors occur during ++ * either Slave mode or DMA mode, and during Start Split transactions. ++ */ ++static int32_t handle_hc_ack_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "ACK Received--\n", hc->hc_num); ++ ++ if (hc->do_split) { ++ /* ++ * Handle ACK on SSPLIT. ++ * ACK should not occur in CSPLIT. ++ */ ++ if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) { ++ qtd->ssplit_out_xfer_count = hc->xfer_len; ++ } ++ if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) { ++ /* Don't need complete for isochronous out transfers. */ ++ qtd->complete_split = 1; ++ } ++ ++ /* ISOC OUT */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) { ++ switch (hc->xact_pos) { ++ case DWC_HCSPLIT_XACTPOS_ALL: ++ break; ++ case DWC_HCSPLIT_XACTPOS_END: ++ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; ++ qtd->isoc_split_offset = 0; ++ break; ++ case DWC_HCSPLIT_XACTPOS_BEGIN: ++ case DWC_HCSPLIT_XACTPOS_MID: ++ /* ++ * For BEGIN or MID, calculate the length for ++ * the next microframe to determine the correct ++ * SSPLIT token, either MID or END. ++ */ ++ { ++ struct dwc_otg_hcd_iso_packet_desc ++ *frame_desc; ++ ++ frame_desc = ++ &qtd->urb-> ++ iso_descs[qtd->isoc_frame_index]; ++ qtd->isoc_split_offset += 188; ++ ++ if ((frame_desc->length - ++ qtd->isoc_split_offset) <= 188) { ++ qtd->isoc_split_pos = ++ DWC_HCSPLIT_XACTPOS_END; ++ } else { ++ qtd->isoc_split_pos = ++ DWC_HCSPLIT_XACTPOS_MID; ++ } ++ ++ } ++ break; ++ } ++ } else { ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK); ++ } ++ } else { ++ /* ++ * An unmasked ACK on a non-split DMA transaction is ++ * for the sole purpose of resetting error counts. Disable other ++ * interrupts unmasked for the same reason. ++ */ ++ if(hcd->core_if->dma_enable) { ++ disable_hc_int(hc_regs, datatglerr); ++ disable_hc_int(hc_regs, nak); ++ } ++ qtd->error_count = 0; ++ ++ if (hc->qh->ping_state) { ++ hc->qh->ping_state = 0; ++ /* ++ * Halt the channel so the transfer can be re-started ++ * from the appropriate point. This only happens in ++ * Slave mode. In DMA mode, the ping_state is cleared ++ * when the transfer is started because the core ++ * automatically executes the PING, then the transfer. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK); ++ } ++ } ++ ++ /* ++ * If the ACK occurred when _not_ in the PING state, let the channel ++ * continue transferring data after clearing the error count. ++ */ ++ ++ disable_hc_int(hc_regs, ack); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel NYET interrupt. This interrupt should only occur on ++ * Bulk and Control OUT endpoints and for complete split transactions. If a ++ * NYET occurs at the same time as a Transfer Complete interrupt, it is ++ * handled in the xfercomp interrupt handler, not here. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "NYET Received--\n", hc->hc_num); ++ ++ /* ++ * NYET on CSPLIT ++ * re-do the CSPLIT immediately on non-periodic ++ */ ++ if (hc->do_split && hc->complete_split) { ++ if (hc->ep_is_in && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) ++ && hcd->core_if->dma_enable) { ++ qtd->complete_split = 0; ++ qtd->isoc_split_offset = 0; ++ if (++qtd->isoc_frame_index == qtd->urb->packet_count) { ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } ++ else ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ goto handle_nyet_done; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ int frnum = dwc_otg_hcd_get_frame_number(hcd); ++ ++ // With the FIQ running we only ever see the failed NYET ++ if (dwc_full_frame_num(frnum) != ++ dwc_full_frame_num(hc->qh->sched_frame) || ++ fiq_fsm_enable) { ++ /* ++ * No longer in the same full speed frame. ++ * Treat this as a transaction error. ++ */ ++#if 0 ++ /** @todo Fix system performance so this can ++ * be treated as an error. Right now complete ++ * splits cannot be scheduled precisely enough ++ * due to other system activity, so this error ++ * occurs regularly in Slave mode. ++ */ ++ qtd->error_count++; ++#endif ++ qtd->complete_split = 0; ++ halt_channel(hcd, hc, qtd, ++ DWC_OTG_HC_XFER_XACT_ERR); ++ /** @todo add support for isoc release */ ++ goto handle_nyet_done; ++ } ++ } ++ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET); ++ goto handle_nyet_done; ++ } ++ ++ hc->qh->ping_state = 1; ++ qtd->error_count = 0; ++ ++ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd, ++ DWC_OTG_HC_XFER_NYET); ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ ++ /* ++ * Halt the channel and re-start the transfer so the PING ++ * protocol will start. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET); ++ ++handle_nyet_done: ++ disable_hc_int(hc_regs, nyet); ++ return 1; ++} ++ ++/** ++ * Handles a host channel babble interrupt. This handler may be called in ++ * either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_babble_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Babble Error--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, ++ DWC_OTG_HC_XFER_BABBLE_ERR); ++ goto handle_babble_done; ++ } ++ ++ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { ++ hcd->fops->complete(hcd, qtd->urb->priv, ++ qtd->urb, -DWC_E_OVERFLOW); ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR); ++ } else { ++ dwc_otg_halt_status_e halt_status; ++ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_BABBLE_ERR); ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++ ++handle_babble_done: ++ disable_hc_int(hc_regs, bblerr); ++ return 1; ++} ++ ++/** ++ * Handles a host channel AHB error interrupt. This handler is only called in ++ * DMA mode. ++ */ ++static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ hcchar_data_t hcchar; ++ hcsplt_data_t hcsplt; ++ hctsiz_data_t hctsiz; ++ uint32_t hcdma; ++ char *pipetype, *speed; ++ ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "AHB Error--\n", hc->hc_num); ++ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ hcdma = DWC_READ_REG32(&hc_regs->hcdma); ++ ++ DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num); ++ DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); ++ DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma); ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n"); ++ DWC_ERROR(" Device address: %d\n", ++ dwc_otg_hcd_get_dev_addr(&urb->pipe_info)); ++ DWC_ERROR(" Endpoint: %d, %s\n", ++ dwc_otg_hcd_get_ep_num(&urb->pipe_info), ++ (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT")); ++ ++ switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) { ++ case UE_CONTROL: ++ pipetype = "CONTROL"; ++ break; ++ case UE_BULK: ++ pipetype = "BULK"; ++ break; ++ case UE_INTERRUPT: ++ pipetype = "INTERRUPT"; ++ break; ++ case UE_ISOCHRONOUS: ++ pipetype = "ISOCHRONOUS"; ++ break; ++ default: ++ pipetype = "UNKNOWN"; ++ break; ++ } ++ ++ DWC_ERROR(" Endpoint type: %s\n", pipetype); ++ ++ switch (hc->speed) { ++ case DWC_OTG_EP_SPEED_HIGH: ++ speed = "HIGH"; ++ break; ++ case DWC_OTG_EP_SPEED_FULL: ++ speed = "FULL"; ++ break; ++ case DWC_OTG_EP_SPEED_LOW: ++ speed = "LOW"; ++ break; ++ default: ++ speed = "UNKNOWN"; ++ break; ++ }; ++ ++ DWC_ERROR(" Speed: %s\n", speed); ++ ++ DWC_ERROR(" Max packet size: %d\n", ++ dwc_otg_hcd_get_mps(&urb->pipe_info)); ++ DWC_ERROR(" Data buffer length: %d\n", urb->length); ++ DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n", ++ urb->buf, (void *)urb->dma); ++ DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n", ++ urb->setup_packet, (void *)urb->setup_dma); ++ DWC_ERROR(" Interval: %d\n", urb->interval); ++ ++ /* Core haltes the channel for Descriptor DMA mode */ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, ++ DWC_OTG_HC_XFER_AHB_ERR); ++ goto handle_ahberr_done; ++ } ++ ++ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_IO); ++ ++ /* ++ * Force a channel halt. Don't call halt_channel because that won't ++ * write to the HCCHARn register in DMA mode to force the halt. ++ */ ++ dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR); ++handle_ahberr_done: ++ disable_hc_int(hc_regs, ahberr); ++ return 1; ++} ++ ++/** ++ * Handles a host channel transaction error interrupt. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Transaction Error--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, ++ DWC_OTG_HC_XFER_XACT_ERR); ++ goto handle_xacterr_done; ++ } ++ ++ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { ++ case UE_CONTROL: ++ case UE_BULK: ++ qtd->error_count++; ++ if (!hc->qh->ping_state) { ++ ++ update_urb_state_xfer_intr(hc, hc_regs, ++ qtd->urb, qtd, ++ DWC_OTG_HC_XFER_XACT_ERR); ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ if (!hc->ep_is_in && hc->speed == DWC_OTG_EP_SPEED_HIGH) { ++ hc->qh->ping_state = 1; ++ } ++ } ++ ++ /* ++ * Halt the channel so the transfer can be re-started from ++ * the appropriate point or the PING protocol will start. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ break; ++ case UE_INTERRUPT: ++ qtd->error_count++; ++ if (hc->do_split && hc->complete_split) { ++ qtd->complete_split = 0; ++ } ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ break; ++ case UE_ISOCHRONOUS: ++ { ++ dwc_otg_halt_status_e halt_status; ++ halt_status = ++ update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_XACT_ERR); ++ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++ break; ++ } ++handle_xacterr_done: ++ disable_hc_int(hc_regs, xacterr); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel frame overrun interrupt. This handler may be called ++ * in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Frame Overrun--\n", hc->hc_num); ++ ++ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { ++ case UE_CONTROL: ++ case UE_BULK: ++ break; ++ case UE_INTERRUPT: ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN); ++ break; ++ case UE_ISOCHRONOUS: ++ { ++ dwc_otg_halt_status_e halt_status; ++ halt_status = ++ update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_FRAME_OVERRUN); ++ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++ break; ++ } ++ ++ disable_hc_int(hc_regs, frmovrun); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel data toggle error interrupt. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Data Toggle Error on %s transfer--\n", ++ hc->hc_num, (hc->ep_is_in ? "IN" : "OUT")); ++ ++ /* Data toggles on split transactions cause the hc to halt. ++ * restart transfer */ ++ if(hc->qh->do_split) ++ { ++ qtd->error_count++; ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ update_urb_state_xfer_intr(hc, hc_regs, ++ qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ } else if (hc->ep_is_in) { ++ /* An unmasked data toggle error on a non-split DMA transaction is ++ * for the sole purpose of resetting error counts. Disable other ++ * interrupts unmasked for the same reason. ++ */ ++ if(hcd->core_if->dma_enable) { ++ disable_hc_int(hc_regs, ack); ++ disable_hc_int(hc_regs, nak); ++ } ++ qtd->error_count = 0; ++ } ++ ++ disable_hc_int(hc_regs, datatglerr); ++ ++ return 1; ++} ++ ++#ifdef DEBUG ++/** ++ * This function is for debug only. It checks that a valid halt status is set ++ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is ++ * taken and a warning is issued. ++ * @return 1 if halt status is ok, 0 otherwise. ++ */ ++static inline int halt_status_ok(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ hcsplt_data_t hcsplt; ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) { ++ /* ++ * This code is here only as a check. This condition should ++ * never happen. Ignore the halt if it does occur. ++ */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk); ++ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); ++ DWC_WARN ++ ("%s: hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, " ++ "channel %d, hcchar 0x%08x, hctsiz 0x%08x, " ++ "hcint 0x%08x, hcintmsk 0x%08x, " ++ "hcsplt 0x%08x, qtd->complete_split %d\n", __func__, ++ hc->hc_num, hcchar.d32, hctsiz.d32, hcint.d32, ++ hcintmsk.d32, hcsplt.d32, qtd->complete_split); ++ ++ DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n", ++ __func__, hc->hc_num); ++ DWC_WARN("\n"); ++ clear_hc_int(hc_regs, chhltd); ++ return 0; ++ } ++ ++ /* ++ * This code is here only as a check. hcchar.chdis should ++ * never be set when the halt interrupt occurs. Halt the ++ * channel again if it does occur. ++ */ ++ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); ++ if (hcchar.b.chdis) { ++ DWC_WARN("%s: hcchar.chdis set unexpectedly, " ++ "hcchar 0x%08x, trying to halt again\n", ++ __func__, hcchar.d32); ++ clear_hc_int(hc_regs, chhltd); ++ hc->halt_pending = 0; ++ halt_channel(hcd, hc, qtd, hc->halt_status); ++ return 0; ++ } ++ ++ return 1; ++} ++#endif ++ ++/** ++ * Handles a host Channel Halted interrupt in DMA mode. This handler ++ * determines the reason the channel halted and proceeds accordingly. ++ */ ++static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ int out_nak_enh = 0; ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ /* For core with OUT NAK enhancement, the flow for high- ++ * speed CONTROL/BULK OUT is handled a little differently. ++ */ ++ if (hcd->core_if->snpsid >= OTG_CORE_REV_2_71a) { ++ if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in && ++ (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || ++ hc->ep_type == DWC_OTG_EP_TYPE_BULK)) { ++ out_nak_enh = 1; ++ } ++ } ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || ++ (hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR ++ && !hcd->core_if->dma_desc_enable)) { ++ /* ++ * Just release the channel. A dequeue can happen on a ++ * transfer timeout. In the case of an AHB Error, the channel ++ * was forced to halt because there's no way to gracefully ++ * recover. ++ */ ++ if (hcd->core_if->dma_desc_enable) ++ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, ++ hc->halt_status); ++ else ++ release_channel(hcd, hc, qtd, hc->halt_status); ++ return; ++ } ++ ++ /* Read the HCINTn register to determine the cause for the halt. */ ++ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk); ++ ++ if (hcint.b.xfercomp) { ++ /** @todo This is here because of a possible hardware bug. Spec ++ * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT ++ * interrupt w/ACK bit set should occur, but I only see the ++ * XFERCOMP bit, even with it masked out. This is a workaround ++ * for that behavior. Should fix this when hardware is fixed. ++ */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) { ++ handle_hc_ack_intr(hcd, hc, hc_regs, qtd); ++ } ++ handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.stall) { ++ handle_hc_stall_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.xacterr && !hcd->core_if->dma_desc_enable) { ++ if (out_nak_enh) { ++ if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) { ++ DWC_DEBUGPL(DBG_HCD, "XactErr with NYET/NAK/ACK\n"); ++ qtd->error_count = 0; ++ } else { ++ DWC_DEBUGPL(DBG_HCD, "XactErr without NYET/NAK/ACK\n"); ++ } ++ } ++ ++ /* ++ * Must handle xacterr before nak or ack. Could get a xacterr ++ * at the same time as either of these on a BULK/CONTROL OUT ++ * that started with a PING. The xacterr takes precedence. ++ */ ++ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.xcs_xact && hcd->core_if->dma_desc_enable) { ++ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.ahberr && hcd->core_if->dma_desc_enable) { ++ handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.bblerr) { ++ handle_hc_babble_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.frmovrun) { ++ handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.datatglerr) { ++ handle_hc_datatglerr_intr(hcd, hc, hc_regs, qtd); ++ } else if (!out_nak_enh) { ++ if (hcint.b.nyet) { ++ /* ++ * Must handle nyet before nak or ack. Could get a nyet at the ++ * same time as either of those on a BULK/CONTROL OUT that ++ * started with a PING. The nyet takes precedence. ++ */ ++ handle_hc_nyet_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.nak && !hcintmsk.b.nak) { ++ /* ++ * If nak is not masked, it's because a non-split IN transfer ++ * is in an error state. In that case, the nak is handled by ++ * the nak interrupt handler, not here. Handle nak here for ++ * BULK/CONTROL OUT transfers, which halt on a NAK to allow ++ * rewinding the buffer pointer. ++ */ ++ handle_hc_nak_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.ack && !hcintmsk.b.ack) { ++ /* ++ * If ack is not masked, it's because a non-split IN transfer ++ * is in an error state. In that case, the ack is handled by ++ * the ack interrupt handler, not here. Handle ack here for ++ * split transfers. Start splits halt on ACK. ++ */ ++ handle_hc_ack_intr(hcd, hc, hc_regs, qtd); ++ } else { ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * A periodic transfer halted with no other channel ++ * interrupts set. Assume it was halted by the core ++ * because it could not be completed in its scheduled ++ * (micro)frame. ++ */ ++#ifdef DEBUG ++ DWC_PRINTF ++ ("%s: Halt channel %d (assume incomplete periodic transfer)\n", ++ __func__, hc->hc_num); ++#endif ++ halt_channel(hcd, hc, qtd, ++ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE); ++ } else { ++ DWC_ERROR ++ ("%s: Channel %d, DMA Mode -- ChHltd set, but reason " ++ "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n", ++ __func__, hc->hc_num, hcint.d32, ++ DWC_READ_REG32(&hcd-> ++ core_if->core_global_regs-> ++ gintsts)); ++ /* Failthrough: use 3-strikes rule */ ++ qtd->error_count++; ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ update_urb_state_xfer_intr(hc, hc_regs, ++ qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ } ++ ++ } ++ } else { ++ DWC_PRINTF("NYET/NAK/ACK/other in non-error case, 0x%08x\n", ++ hcint.d32); ++ /* Failthrough: use 3-strikes rule */ ++ qtd->error_count++; ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ update_urb_state_xfer_intr(hc, hc_regs, ++ qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ } ++} ++ ++/** ++ * Handles a host channel Channel Halted interrupt. ++ * ++ * In slave mode, this handler is called only when the driver specifically ++ * requests a halt. This occurs during handling other host channel interrupts ++ * (e.g. nak, xacterr, stall, nyet, etc.). ++ * ++ * In DMA mode, this is the interrupt that occurs when the core has finished ++ * processing a transfer on a channel. Other host channel interrupts (except ++ * ahberr) are disabled in DMA mode. ++ */ ++static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t * hcd, ++ dwc_hc_t * hc, ++ dwc_otg_hc_regs_t * hc_regs, ++ dwc_otg_qtd_t * qtd) ++{ ++ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " ++ "Channel Halted--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_enable) { ++ handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd); ++ } else { ++#ifdef DEBUG ++ if (!halt_status_ok(hcd, hc, hc_regs, qtd)) { ++ return 1; ++ } ++#endif ++ release_channel(hcd, hc, qtd, hc->halt_status); ++ } ++ ++ return 1; ++} ++ ++ ++/** ++ * dwc_otg_fiq_unmangle_isoc() - Update the iso_frame_desc structure on ++ * FIQ transfer completion ++ * @hcd: Pointer to dwc_otg_hcd struct ++ * @num: Host channel number ++ * ++ * 1. Un-mangle the status as recorded in each iso_frame_desc status ++ * 2. Copy it from the dwc_otg_urb into the real URB ++ */ ++void dwc_otg_fiq_unmangle_isoc(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, dwc_otg_qtd_t *qtd, uint32_t num) ++{ ++ struct dwc_otg_hcd_urb *dwc_urb = qtd->urb; ++ int nr_frames = dwc_urb->packet_count; ++ int i; ++ hcint_data_t frame_hcint; ++ ++ for (i = 0; i < nr_frames; i++) { ++ frame_hcint.d32 = dwc_urb->iso_descs[i].status; ++ if (frame_hcint.b.xfercomp) { ++ dwc_urb->iso_descs[i].status = 0; ++ dwc_urb->actual_length += dwc_urb->iso_descs[i].actual_length; ++ } else if (frame_hcint.b.frmovrun) { ++ if (qh->ep_is_in) ++ dwc_urb->iso_descs[i].status = -DWC_E_NO_STREAM_RES; ++ else ++ dwc_urb->iso_descs[i].status = -DWC_E_COMMUNICATION; ++ dwc_urb->error_count++; ++ dwc_urb->iso_descs[i].actual_length = 0; ++ } else if (frame_hcint.b.xacterr) { ++ dwc_urb->iso_descs[i].status = -DWC_E_PROTOCOL; ++ dwc_urb->error_count++; ++ dwc_urb->iso_descs[i].actual_length = 0; ++ } else if (frame_hcint.b.bblerr) { ++ dwc_urb->iso_descs[i].status = -DWC_E_OVERFLOW; ++ dwc_urb->error_count++; ++ dwc_urb->iso_descs[i].actual_length = 0; ++ } else { ++ /* Something went wrong */ ++ dwc_urb->iso_descs[i].status = -1; ++ dwc_urb->iso_descs[i].actual_length = 0; ++ dwc_urb->error_count++; ++ } ++ } ++ qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, qh->interval * (nr_frames - 1)); ++ ++ //printk_ratelimited(KERN_INFO "%s: HS isochronous of %d/%d frames with %d errors complete\n", ++ // __FUNCTION__, i, dwc_urb->packet_count, dwc_urb->error_count); ++} ++ ++/** ++ * dwc_otg_fiq_unsetup_per_dma() - Remove data from bounce buffers for split transactions ++ * @hcd: Pointer to dwc_otg_hcd struct ++ * @num: Host channel number ++ * ++ * Copies data from the FIQ bounce buffers into the URB's transfer buffer. Does not modify URB state. ++ * Returns total length of data or -1 if the buffers were not used. ++ * ++ */ ++int dwc_otg_fiq_unsetup_per_dma(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, dwc_otg_qtd_t *qtd, uint32_t num) ++{ ++ dwc_hc_t *hc = qh->channel; ++ struct fiq_dma_blob *blob = hcd->fiq_dmab; ++ struct fiq_channel_state *st = &hcd->fiq_state->channel[num]; ++ uint8_t *ptr = NULL; ++ int index = 0, len = 0; ++ int i = 0; ++ if (hc->ep_is_in) { ++ /* Copy data out of the DMA bounce buffers to the URB's buffer. ++ * The align_buf is ignored as this is ignored on FSM enqueue. */ ++ ptr = qtd->urb->buf; ++ if (qh->ep_type == UE_ISOCHRONOUS) { ++ /* Isoc IN transactions - grab the offset of the iso_frame_desc into the URB transfer buffer */ ++ index = qtd->isoc_frame_index; ++ ptr += qtd->urb->iso_descs[index].offset; ++ } else { ++ /* Need to increment by actual_length for interrupt IN */ ++ ptr += qtd->urb->actual_length; ++ } ++ ++ for (i = 0; i < st->dma_info.index; i++) { ++ len += st->dma_info.slot_len[i]; ++ dwc_memcpy(ptr, &blob->channel[num].index[i].buf[0], st->dma_info.slot_len[i]); ++ ptr += st->dma_info.slot_len[i]; ++ } ++ return len; ++ } else { ++ /* OUT endpoints - nothing to do. */ ++ return -1; ++ } ++ ++} ++/** ++ * dwc_otg_hcd_handle_hc_fsm() - handle an unmasked channel interrupt ++ * from a channel handled in the FIQ ++ * @hcd: Pointer to dwc_otg_hcd struct ++ * @num: Host channel number ++ * ++ * If a host channel interrupt was received by the IRQ and this was a channel ++ * used by the FIQ, the execution flow for transfer completion is substantially ++ * different from the normal (messy) path. This function and its friends handles ++ * channel cleanup and transaction completion from a FIQ transaction. ++ */ ++void dwc_otg_hcd_handle_hc_fsm(dwc_otg_hcd_t *hcd, uint32_t num) ++{ ++ struct fiq_channel_state *st = &hcd->fiq_state->channel[num]; ++ dwc_hc_t *hc = hcd->hc_ptr_array[num]; ++ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list); ++ dwc_otg_qh_t *qh = hc->qh; ++ dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[num]; ++ hcint_data_t hcint = hcd->fiq_state->channel[num].hcint_copy; ++ int hostchannels = 0; ++ fiq_print(FIQDBG_INT, hcd->fiq_state, "OUT %01d %01d ", num , st->fsm); ++ ++ hostchannels = hcd->available_host_channels; ++ switch (st->fsm) { ++ case FIQ_TEST: ++ break; ++ ++ case FIQ_DEQUEUE_ISSUED: ++ /* hc_halt was called. QTD no longer exists. */ ++ /* TODO: for a nonperiodic split transaction, need to issue a ++ * CLEAR_TT_BUFFER hub command if we were in the start-split phase. ++ */ ++ release_channel(hcd, hc, NULL, hc->halt_status); ++ break; ++ ++ case FIQ_NP_SPLIT_DONE: ++ /* Nonperiodic transaction complete. */ ++ if (!hc->ep_is_in) { ++ qtd->ssplit_out_xfer_count = hc->xfer_len; ++ } ++ if (hcint.b.xfercomp) { ++ handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.nak) { ++ handle_hc_nak_intr(hcd, hc, hc_regs, qtd); ++ } ++ break; ++ ++ case FIQ_NP_SPLIT_HS_ABORTED: ++ /* A HS abort is a 3-strikes on the HS bus at any point in the transaction. ++ * Normally a CLEAR_TT_BUFFER hub command would be required: we can't do that ++ * because there's no guarantee which order a non-periodic split happened in. ++ * We could end up clearing a perfectly good transaction out of the buffer. ++ */ ++ if (hcint.b.xacterr) { ++ qtd->error_count += st->nr_errors; ++ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.ahberr) { ++ handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd); ++ } else { ++ local_fiq_disable(); ++ BUG(); ++ } ++ break; ++ ++ case FIQ_NP_SPLIT_LS_ABORTED: ++ /* A few cases can cause this - either an unknown state on a SSPLIT or ++ * STALL/data toggle error response on a CSPLIT */ ++ if (hcint.b.stall) { ++ handle_hc_stall_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.datatglerr) { ++ handle_hc_datatglerr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.bblerr) { ++ handle_hc_babble_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.ahberr) { ++ handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd); ++ } else { ++ local_fiq_disable(); ++ BUG(); ++ } ++ break; ++ ++ case FIQ_PER_SPLIT_DONE: ++ /* Isoc IN or Interrupt IN/OUT */ ++ ++ /* Flow control here is different from the normal execution by the driver. ++ * We need to completely ignore most of the driver's method of handling ++ * split transactions and do it ourselves. ++ */ ++ if (hc->ep_type == UE_INTERRUPT) { ++ if (hcint.b.nak) { ++ handle_hc_nak_intr(hcd, hc, hc_regs, qtd); ++ } else if (hc->ep_is_in) { ++ int len; ++ len = dwc_otg_fiq_unsetup_per_dma(hcd, hc->qh, qtd, num); ++ //printk(KERN_NOTICE "FIQ Transaction: hc=%d len=%d urb_len = %d\n", num, len, qtd->urb->length); ++ qtd->urb->actual_length += len; ++ if (qtd->urb->actual_length >= qtd->urb->length) { ++ qtd->urb->status = 0; ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ /* Interrupt transfer not complete yet - is it a short read? */ ++ if (len < hc->max_packet) { ++ /* Interrupt transaction complete */ ++ qtd->urb->status = 0; ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ /* Further transactions required */ ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); ++ } ++ } ++ } else { ++ /* Interrupt OUT complete. */ ++ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); ++ qtd->urb->actual_length += hc->xfer_len; ++ if (qtd->urb->actual_length >= qtd->urb->length) { ++ qtd->urb->status = 0; ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); ++ } ++ } ++ } else { ++ /* ISOC IN complete. */ ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ int len = 0; ++ /* Record errors, update qtd. */ ++ if (st->nr_errors) { ++ frame_desc->actual_length = 0; ++ frame_desc->status = -DWC_E_PROTOCOL; ++ } else { ++ frame_desc->status = 0; ++ /* Unswizzle dma */ ++ len = dwc_otg_fiq_unsetup_per_dma(hcd, qh, qtd, num); ++ frame_desc->actual_length = len; ++ } ++ qtd->isoc_frame_index++; ++ if (qtd->isoc_frame_index == qtd->urb->packet_count) { ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); ++ } ++ } ++ break; ++ ++ case FIQ_PER_ISO_OUT_DONE: { ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ /* Record errors, update qtd. */ ++ if (st->nr_errors) { ++ frame_desc->actual_length = 0; ++ frame_desc->status = -DWC_E_PROTOCOL; ++ } else { ++ frame_desc->status = 0; ++ frame_desc->actual_length = frame_desc->length; ++ } ++ qtd->isoc_frame_index++; ++ qtd->isoc_split_offset = 0; ++ if (qtd->isoc_frame_index == qtd->urb->packet_count) { ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); ++ } ++ } ++ break; ++ ++ case FIQ_PER_SPLIT_NYET_ABORTED: ++ /* Doh. lost the data. */ ++ printk_ratelimited(KERN_INFO "Transfer to device %d endpoint 0x%x frame %d failed " ++ "- FIQ reported NYET. Data may have been lost.\n", ++ hc->dev_addr, hc->ep_num, dwc_otg_hcd_get_frame_number(hcd) >> 3); ++ if (hc->ep_type == UE_ISOCHRONOUS) { ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ /* Record errors, update qtd. */ ++ frame_desc->actual_length = 0; ++ frame_desc->status = -DWC_E_PROTOCOL; ++ qtd->isoc_frame_index++; ++ qtd->isoc_split_offset = 0; ++ if (qtd->isoc_frame_index == qtd->urb->packet_count) { ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); ++ } ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ } ++ break; ++ ++ case FIQ_HS_ISOC_DONE: ++ /* The FIQ has performed a whole pile of isochronous transactions. ++ * The status is recorded as the interrupt state should the transaction ++ * fail. ++ */ ++ dwc_otg_fiq_unmangle_isoc(hcd, qh, qtd, num); ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ break; ++ ++ case FIQ_PER_SPLIT_LS_ABORTED: ++ if (hcint.b.xacterr) { ++ /* Hub has responded with an ERR packet. Device ++ * has been unplugged or the port has been disabled. ++ * TODO: need to issue a reset to the hub port. */ ++ qtd->error_count += 3; ++ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.stall) { ++ handle_hc_stall_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.bblerr) { ++ handle_hc_babble_intr(hcd, hc, hc_regs, qtd); ++ } else { ++ printk_ratelimited(KERN_INFO "Transfer to device %d endpoint 0x%x failed " ++ "- FIQ reported FSM=%d. Data may have been lost.\n", ++ st->fsm, hc->dev_addr, hc->ep_num); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ } ++ break; ++ ++ case FIQ_PER_SPLIT_HS_ABORTED: ++ /* Either the SSPLIT phase suffered transaction errors or something ++ * unexpected happened. ++ */ ++ qtd->error_count += 3; ++ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ break; ++ ++ case FIQ_PER_SPLIT_TIMEOUT: ++ /* Couldn't complete in the nominated frame */ ++ printk(KERN_INFO "Transfer to device %d endpoint 0x%x frame %d failed " ++ "- FIQ timed out. Data may have been lost.\n", ++ hc->dev_addr, hc->ep_num, dwc_otg_hcd_get_frame_number(hcd) >> 3); ++ if (hc->ep_type == UE_ISOCHRONOUS) { ++ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; ++ /* Record errors, update qtd. */ ++ frame_desc->actual_length = 0; ++ if (hc->ep_is_in) { ++ frame_desc->status = -DWC_E_NO_STREAM_RES; ++ } else { ++ frame_desc->status = -DWC_E_COMMUNICATION; ++ } ++ qtd->isoc_frame_index++; ++ if (qtd->isoc_frame_index == qtd->urb->packet_count) { ++ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); ++ } ++ } else { ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ } ++ break; ++ ++ default: ++ DWC_WARN("Unexpected state received on hc=%d fsm=%d on transfer to device %d ep 0x%x", ++ hc->hc_num, st->fsm, hc->dev_addr, hc->ep_num); ++ qtd->error_count++; ++ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ } ++ return; ++} ++ ++/** Handles interrupt for a specific Host Channel */ ++int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, uint32_t num) ++{ ++ int retval = 0; ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ dwc_hc_t *hc; ++ dwc_otg_hc_regs_t *hc_regs; ++ dwc_otg_qtd_t *qtd; ++ ++ DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num); ++ ++ hc = dwc_otg_hcd->hc_ptr_array[num]; ++ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num]; ++ if(hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { ++ /* We are responding to a channel disable. Driver ++ * state is cleared - our qtd has gone away. ++ */ ++ release_channel(dwc_otg_hcd, hc, NULL, hc->halt_status); ++ return 1; ++ } ++ qtd = DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list); ++ ++ /* ++ * FSM mode: Check to see if this is a HC interrupt from a channel handled by the FIQ. ++ * Execution path is fundamentally different for the channels after a FIQ has completed ++ * a split transaction. ++ */ ++ if (fiq_fsm_enable) { ++ switch (dwc_otg_hcd->fiq_state->channel[num].fsm) { ++ case FIQ_PASSTHROUGH: ++ break; ++ case FIQ_PASSTHROUGH_ERRORSTATE: ++ /* Hook into the error count */ ++ fiq_print(FIQDBG_ERR, dwc_otg_hcd->fiq_state, "HCDERR%02d", num); ++ if (!dwc_otg_hcd->fiq_state->channel[num].nr_errors) { ++ qtd->error_count = 0; ++ fiq_print(FIQDBG_ERR, dwc_otg_hcd->fiq_state, "RESET "); ++ } ++ break; ++ default: ++ dwc_otg_hcd_handle_hc_fsm(dwc_otg_hcd, num); ++ return 1; ++ } ++ } ++ ++ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); ++ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk); ++ hcint.d32 = hcint.d32 & hcintmsk.d32; ++ if (!dwc_otg_hcd->core_if->dma_enable) { ++ if (hcint.b.chhltd && hcint.d32 != 0x2) { ++ hcint.b.chhltd = 0; ++ } ++ } ++ ++ if (hcint.b.xfercomp) { ++ retval |= ++ handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ /* ++ * If NYET occurred at same time as Xfer Complete, the NYET is ++ * handled by the Xfer Complete interrupt handler. Don't want ++ * to call the NYET interrupt handler in this case. ++ */ ++ hcint.b.nyet = 0; ++ } ++ if (hcint.b.chhltd) { ++ retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.ahberr) { ++ retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.stall) { ++ retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.nak) { ++ retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.ack) { ++ if(!hcint.b.chhltd) ++ retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.nyet) { ++ retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.xacterr) { ++ retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.bblerr) { ++ retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.frmovrun) { ++ retval |= ++ handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.datatglerr) { ++ retval |= ++ handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ ++ return retval; ++} ++#endif /* DWC_DEVICE_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +@@ -0,0 +1,1005 @@ ++ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_linux.c $ ++ * $Revision: #20 $ ++ * $Date: 2011/10/26 $ ++ * $Change: 1872981 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** ++ * @file ++ * ++ * This file contains the implementation of the HCD. In Linux, the HCD ++ * implements the hc_driver API. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) ++#include <../drivers/usb/core/hcd.h> ++#else ++#include ++#endif ++#include ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)) ++#define USB_URB_EP_LINKING 1 ++#else ++#define USB_URB_EP_LINKING 0 ++#endif ++ ++#include "dwc_otg_hcd_if.h" ++#include "dwc_otg_dbg.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_hcd.h" ++ ++extern unsigned char _dwc_otg_fiq_stub, _dwc_otg_fiq_stub_end; ++ ++/** ++ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is ++ * qualified with its direction (possible 32 endpoints per device). ++ */ ++#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \ ++ ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4) ++ ++static const char dwc_otg_hcd_name[] = "dwc_otg_hcd"; ++ ++extern bool fiq_enable; ++ ++/** @name Linux HC Driver API Functions */ ++/** @{ */ ++/* manage i/o requests, device state */ ++static int dwc_otg_urb_enqueue(struct usb_hcd *hcd, ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ struct usb_host_endpoint *ep, ++#endif ++ struct urb *urb, gfp_t mem_flags); ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb); ++#endif ++#else /* kernels at or post 2.6.30 */ ++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, ++ struct urb *urb, int status); ++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) */ ++ ++static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) ++static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep); ++#endif ++static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd); ++extern int hcd_start(struct usb_hcd *hcd); ++extern void hcd_stop(struct usb_hcd *hcd); ++static int get_frame_number(struct usb_hcd *hcd); ++extern int hub_status_data(struct usb_hcd *hcd, char *buf); ++extern int hub_control(struct usb_hcd *hcd, ++ u16 typeReq, ++ u16 wValue, u16 wIndex, char *buf, u16 wLength); ++ ++struct wrapper_priv_data { ++ dwc_otg_hcd_t *dwc_otg_hcd; ++}; ++ ++/** @} */ ++ ++static struct hc_driver dwc_otg_hc_driver = { ++ ++ .description = dwc_otg_hcd_name, ++ .product_desc = "DWC OTG Controller", ++ .hcd_priv_size = sizeof(struct wrapper_priv_data), ++ ++ .irq = dwc_otg_hcd_irq, ++ ++ .flags = HCD_MEMORY | HCD_USB2, ++ ++ //.reset = ++ .start = hcd_start, ++ //.suspend = ++ //.resume = ++ .stop = hcd_stop, ++ ++ .urb_enqueue = dwc_otg_urb_enqueue, ++ .urb_dequeue = dwc_otg_urb_dequeue, ++ .endpoint_disable = endpoint_disable, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) ++ .endpoint_reset = endpoint_reset, ++#endif ++ .get_frame_number = get_frame_number, ++ ++ .hub_status_data = hub_status_data, ++ .hub_control = hub_control, ++ //.bus_suspend = ++ //.bus_resume = ++}; ++ ++/** Gets the dwc_otg_hcd from a struct usb_hcd */ ++static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd) ++{ ++ struct wrapper_priv_data *p; ++ p = (struct wrapper_priv_data *)(hcd->hcd_priv); ++ return p->dwc_otg_hcd; ++} ++ ++/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */ ++static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t * dwc_otg_hcd) ++{ ++ return dwc_otg_hcd_get_priv_data(dwc_otg_hcd); ++} ++ ++/** Gets the usb_host_endpoint associated with an URB. */ ++inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb) ++{ ++ struct usb_device *dev = urb->dev; ++ int ep_num = usb_pipeendpoint(urb->pipe); ++ ++ if (usb_pipein(urb->pipe)) ++ return dev->ep_in[ep_num]; ++ else ++ return dev->ep_out[ep_num]; ++} ++ ++static int _disconnect(dwc_otg_hcd_t * hcd) ++{ ++ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); ++ ++ usb_hcd->self.is_b_host = 0; ++ return 0; ++} ++ ++static int _start(dwc_otg_hcd_t * hcd) ++{ ++ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); ++ ++ usb_hcd->self.is_b_host = dwc_otg_hcd_is_b_host(hcd); ++ hcd_start(usb_hcd); ++ ++ return 0; ++} ++ ++static int _hub_info(dwc_otg_hcd_t * hcd, void *urb_handle, uint32_t * hub_addr, ++ uint32_t * port_addr) ++{ ++ struct urb *urb = (struct urb *)urb_handle; ++ struct usb_bus *bus; ++#if 1 //GRAYG - temporary ++ if (NULL == urb_handle) ++ DWC_ERROR("**** %s - NULL URB handle\n", __func__);//GRAYG ++ if (NULL == urb->dev) ++ DWC_ERROR("**** %s - URB has no device\n", __func__);//GRAYG ++ if (NULL == port_addr) ++ DWC_ERROR("**** %s - NULL port_address\n", __func__);//GRAYG ++#endif ++ if (urb->dev->tt) { ++ if (NULL == urb->dev->tt->hub) { ++ DWC_ERROR("**** %s - (URB's transactor has no TT - giving no hub)\n", ++ __func__); //GRAYG ++ //*hub_addr = (u8)usb_pipedevice(urb->pipe); //GRAYG ++ *hub_addr = 0; //GRAYG ++ // we probably shouldn't have a transaction translator if ++ // there's no associated hub? ++ } else { ++ bus = hcd_to_bus(dwc_otg_hcd_to_hcd(hcd)); ++ if (urb->dev->tt->hub == bus->root_hub) ++ *hub_addr = 0; ++ else ++ *hub_addr = urb->dev->tt->hub->devnum; ++ } ++ *port_addr = urb->dev->tt->multi ? urb->dev->ttport : 1; ++ } else { ++ *hub_addr = 0; ++ *port_addr = urb->dev->ttport; ++ } ++ return 0; ++} ++ ++static int _speed(dwc_otg_hcd_t * hcd, void *urb_handle) ++{ ++ struct urb *urb = (struct urb *)urb_handle; ++ return urb->dev->speed; ++} ++ ++static int _get_b_hnp_enable(dwc_otg_hcd_t * hcd) ++{ ++ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); ++ return usb_hcd->self.b_hnp_enable; ++} ++ ++static void allocate_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw, ++ struct urb *urb) ++{ ++ hcd_to_bus(hcd)->bandwidth_allocated += bw / urb->interval; ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ hcd_to_bus(hcd)->bandwidth_isoc_reqs++; ++ } else { ++ hcd_to_bus(hcd)->bandwidth_int_reqs++; ++ } ++} ++ ++static void free_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw, ++ struct urb *urb) ++{ ++ hcd_to_bus(hcd)->bandwidth_allocated -= bw / urb->interval; ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ hcd_to_bus(hcd)->bandwidth_isoc_reqs--; ++ } else { ++ hcd_to_bus(hcd)->bandwidth_int_reqs--; ++ } ++} ++ ++/** ++ * Sets the final status of an URB and returns it to the device driver. Any ++ * required cleanup of the URB is performed. The HCD lock should be held on ++ * entry. ++ */ ++static int _complete(dwc_otg_hcd_t * hcd, void *urb_handle, ++ dwc_otg_hcd_urb_t * dwc_otg_urb, int32_t status) ++{ ++ struct urb *urb = (struct urb *)urb_handle; ++ urb_tq_entry_t *new_entry; ++ int rc = 0; ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ DWC_PRINTF("%s: urb %p, device %d, ep %d %s, status=%d\n", ++ __func__, urb, usb_pipedevice(urb->pipe), ++ usb_pipeendpoint(urb->pipe), ++ usb_pipein(urb->pipe) ? "IN" : "OUT", status); ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ int i; ++ for (i = 0; i < urb->number_of_packets; i++) { ++ DWC_PRINTF(" ISO Desc %d status: %d\n", ++ i, urb->iso_frame_desc[i].status); ++ } ++ } ++ } ++ new_entry = DWC_ALLOC_ATOMIC(sizeof(urb_tq_entry_t)); ++ urb->actual_length = dwc_otg_hcd_urb_get_actual_length(dwc_otg_urb); ++ /* Convert status value. */ ++ switch (status) { ++ case -DWC_E_PROTOCOL: ++ status = -EPROTO; ++ break; ++ case -DWC_E_IN_PROGRESS: ++ status = -EINPROGRESS; ++ break; ++ case -DWC_E_PIPE: ++ status = -EPIPE; ++ break; ++ case -DWC_E_IO: ++ status = -EIO; ++ break; ++ case -DWC_E_TIMEOUT: ++ status = -ETIMEDOUT; ++ break; ++ case -DWC_E_OVERFLOW: ++ status = -EOVERFLOW; ++ break; ++ case -DWC_E_SHUTDOWN: ++ status = -ESHUTDOWN; ++ break; ++ default: ++ if (status) { ++ DWC_PRINTF("Uknown urb status %d\n", status); ++ ++ } ++ } ++ ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ int i; ++ ++ urb->error_count = dwc_otg_hcd_urb_get_error_count(dwc_otg_urb); ++ for (i = 0; i < urb->number_of_packets; ++i) { ++ urb->iso_frame_desc[i].actual_length = ++ dwc_otg_hcd_urb_get_iso_desc_actual_length ++ (dwc_otg_urb, i); ++ urb->iso_frame_desc[i].status = ++ dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_urb, i); ++ } ++ } ++ ++ urb->status = status; ++ urb->hcpriv = NULL; ++ if (!status) { ++ if ((urb->transfer_flags & URB_SHORT_NOT_OK) && ++ (urb->actual_length < urb->transfer_buffer_length)) { ++ urb->status = -EREMOTEIO; ++ } ++ } ++ ++ if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) || ++ (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { ++ struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb); ++ if (ep) { ++ free_bus_bandwidth(dwc_otg_hcd_to_hcd(hcd), ++ dwc_otg_hcd_get_ep_bandwidth(hcd, ++ ep->hcpriv), ++ urb); ++ } ++ } ++ DWC_FREE(dwc_otg_urb); ++ if (!new_entry) { ++ DWC_ERROR("dwc_otg_hcd: complete: cannot allocate URB TQ entry\n"); ++ urb->status = -EPROTO; ++ /* don't schedule the tasklet - ++ * directly return the packet here with error. */ ++#if USB_URB_EP_LINKING ++ usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb); ++#endif ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb); ++#else ++ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, urb->status); ++#endif ++ } else { ++ new_entry->urb = urb; ++#if USB_URB_EP_LINKING ++ rc = usb_hcd_check_unlink_urb(dwc_otg_hcd_to_hcd(hcd), urb, urb->status); ++ if(0 == rc) { ++ usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb); ++ } ++#endif ++ if(0 == rc) { ++ DWC_TAILQ_INSERT_TAIL(&hcd->completed_urb_list, new_entry, ++ urb_tq_entries); ++ DWC_TASK_HI_SCHEDULE(hcd->completion_tasklet); ++ } ++ } ++ return 0; ++} ++ ++static struct dwc_otg_hcd_function_ops hcd_fops = { ++ .start = _start, ++ .disconnect = _disconnect, ++ .hub_info = _hub_info, ++ .speed = _speed, ++ .complete = _complete, ++ .get_b_hnp_enable = _get_b_hnp_enable, ++}; ++ ++static struct fiq_handler fh = { ++ .name = "usb_fiq", ++}; ++ ++static void hcd_init_fiq(void *cookie) ++{ ++ dwc_otg_device_t *otg_dev = cookie; ++ dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd; ++ struct pt_regs regs; ++ int irq; ++ ++ if (claim_fiq(&fh)) { ++ DWC_ERROR("Can't claim FIQ"); ++ BUG(); ++ } ++ DWC_WARN("FIQ on core %d at 0x%08x", ++ smp_processor_id(), ++ (fiq_fsm_enable ? (int)&dwc_otg_fiq_fsm : (int)&dwc_otg_fiq_nop)); ++ DWC_WARN("FIQ ASM at 0x%08x length %d", (int)&_dwc_otg_fiq_stub, (int)(&_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub)); ++ set_fiq_handler((void *) &_dwc_otg_fiq_stub, &_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub); ++ memset(®s,0,sizeof(regs)); ++ ++ regs.ARM_r8 = (long) dwc_otg_hcd->fiq_state; ++ if (fiq_fsm_enable) { ++ regs.ARM_r9 = dwc_otg_hcd->core_if->core_params->host_channels; ++ //regs.ARM_r10 = dwc_otg_hcd->dma; ++ regs.ARM_fp = (long) dwc_otg_fiq_fsm; ++ } else { ++ regs.ARM_fp = (long) dwc_otg_fiq_nop; ++ } ++ ++ regs.ARM_sp = (long) dwc_otg_hcd->fiq_stack + (sizeof(struct fiq_stack) - 4); ++ ++// __show_regs(®s); ++ set_fiq_regs(®s); ++ ++ //Set the mphi periph to the required registers ++ dwc_otg_hcd->fiq_state->mphi_regs.base = otg_dev->os_dep.mphi_base; ++ dwc_otg_hcd->fiq_state->mphi_regs.ctrl = otg_dev->os_dep.mphi_base + 0x4c; ++ dwc_otg_hcd->fiq_state->mphi_regs.outdda = otg_dev->os_dep.mphi_base + 0x28; ++ dwc_otg_hcd->fiq_state->mphi_regs.outddb = otg_dev->os_dep.mphi_base + 0x2c; ++ dwc_otg_hcd->fiq_state->mphi_regs.intstat = otg_dev->os_dep.mphi_base + 0x50; ++ dwc_otg_hcd->fiq_state->dwc_regs_base = otg_dev->os_dep.base; ++ DWC_WARN("MPHI regs_base at 0x%08x", (int)dwc_otg_hcd->fiq_state->mphi_regs.base); ++ //Enable mphi peripheral ++ writel((1<<31),dwc_otg_hcd->fiq_state->mphi_regs.ctrl); ++#ifdef DEBUG ++ if (readl(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & 0x80000000) ++ DWC_WARN("MPHI periph has been enabled"); ++ else ++ DWC_WARN("MPHI periph has NOT been enabled"); ++#endif ++ // Enable FIQ interrupt from USB peripheral ++#ifdef CONFIG_MULTI_IRQ_HANDLER ++ irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); ++#else ++ irq = INTERRUPT_VC_USB; ++#endif ++ if (irq < 0) { ++ DWC_ERROR("Can't get FIQ irq"); ++ return; ++ } ++ enable_fiq(irq); ++ local_fiq_enable(); ++} ++ ++/** ++ * Initializes the HCD. This function allocates memory for and initializes the ++ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the ++ * USB bus with the core and calls the hc_driver->start() function. It returns ++ * a negative error on failure. ++ */ ++int hcd_init(dwc_bus_dev_t *_dev) ++{ ++ struct usb_hcd *hcd = NULL; ++ dwc_otg_hcd_t *dwc_otg_hcd = NULL; ++ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); ++ int retval = 0; ++ u64 dmamask; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT otg_dev=%p\n", otg_dev); ++ ++ /* Set device flags indicating whether the HCD supports DMA. */ ++ if (dwc_otg_is_dma_enable(otg_dev->core_if)) ++ dmamask = DMA_BIT_MASK(32); ++ else ++ dmamask = 0; ++ ++#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) ++ dma_set_mask(&_dev->dev, dmamask); ++ dma_set_coherent_mask(&_dev->dev, dmamask); ++#elif defined(PCI_INTERFACE) ++ pci_set_dma_mask(_dev, dmamask); ++ pci_set_consistent_dma_mask(_dev, dmamask); ++#endif ++ ++ /* ++ * Allocate memory for the base HCD plus the DWC OTG HCD. ++ * Initialize the base HCD. ++ */ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ++ hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, _dev->dev.bus_id); ++#else ++ hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, dev_name(&_dev->dev)); ++ hcd->has_tt = 1; ++// hcd->uses_new_polling = 1; ++// hcd->poll_rh = 0; ++#endif ++ if (!hcd) { ++ retval = -ENOMEM; ++ goto error1; ++ } ++ ++ hcd->regs = otg_dev->os_dep.base; ++ ++ ++ /* Initialize the DWC OTG HCD. */ ++ dwc_otg_hcd = dwc_otg_hcd_alloc_hcd(); ++ if (!dwc_otg_hcd) { ++ goto error2; ++ } ++ ((struct wrapper_priv_data *)(hcd->hcd_priv))->dwc_otg_hcd = ++ dwc_otg_hcd; ++ otg_dev->hcd = dwc_otg_hcd; ++ otg_dev->hcd->otg_dev = otg_dev; ++ ++ if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) { ++ goto error2; ++ } ++ ++ if (fiq_enable) { ++ if (num_online_cpus() > 1) { ++ /* bcm2709: can run the FIQ on a separate core to IRQs */ ++ smp_call_function_single(1, hcd_init_fiq, otg_dev, 1); ++ } else { ++ smp_call_function_single(0, hcd_init_fiq, otg_dev, 1); ++ } ++ } ++ ++ hcd->self.otg_port = dwc_otg_hcd_otg_port(dwc_otg_hcd); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33) //don't support for LM(with 2.6.20.1 kernel) ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) //version field absent later ++ hcd->self.otg_version = dwc_otg_get_otg_version(otg_dev->core_if); ++#endif ++ /* Don't support SG list at this point */ ++ hcd->self.sg_tablesize = 0; ++#endif ++ /* ++ * Finish generic HCD initialization and start the HCD. This function ++ * allocates the DMA buffer pool, registers the USB bus, requests the ++ * IRQ line, and calls hcd_start method. ++ */ ++#ifdef PLATFORM_INTERFACE ++ retval = usb_add_hcd(hcd, platform_get_irq(_dev, fiq_enable ? 0 : 1), IRQF_SHARED); ++#else ++ retval = usb_add_hcd(hcd, _dev->irq, IRQF_SHARED); ++#endif ++ if (retval < 0) { ++ goto error2; ++ } ++ ++ dwc_otg_hcd_set_priv_data(dwc_otg_hcd, hcd); ++ return 0; ++ ++error2: ++ usb_put_hcd(hcd); ++error1: ++ return retval; ++} ++ ++/** ++ * Removes the HCD. ++ * Frees memory and resources associated with the HCD and deregisters the bus. ++ */ ++void hcd_remove(dwc_bus_dev_t *_dev) ++{ ++ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); ++ dwc_otg_hcd_t *dwc_otg_hcd; ++ struct usb_hcd *hcd; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE otg_dev=%p\n", otg_dev); ++ ++ if (!otg_dev) { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); ++ return; ++ } ++ ++ dwc_otg_hcd = otg_dev->hcd; ++ ++ if (!dwc_otg_hcd) { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); ++ return; ++ } ++ ++ hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd); ++ ++ if (!hcd) { ++ DWC_DEBUGPL(DBG_ANY, ++ "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n", ++ __func__); ++ return; ++ } ++ usb_remove_hcd(hcd); ++ dwc_otg_hcd_set_priv_data(dwc_otg_hcd, NULL); ++ dwc_otg_hcd_remove(dwc_otg_hcd); ++ usb_put_hcd(hcd); ++} ++ ++/* ========================================================================= ++ * Linux HC Driver Functions ++ * ========================================================================= */ ++ ++/** Initializes the DWC_otg controller and its root hub and prepares it for host ++ * mode operation. Activates the root port. Returns 0 on success and a negative ++ * error code on failure. */ ++int hcd_start(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ struct usb_bus *bus; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n"); ++ bus = hcd_to_bus(hcd); ++ ++ hcd->state = HC_STATE_RUNNING; ++ if (dwc_otg_hcd_start(dwc_otg_hcd, &hcd_fops)) { ++ return 0; ++ } ++ ++ /* Initialize and connect root hub if one is not already attached */ ++ if (bus->root_hub) { ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n"); ++ /* Inform the HUB driver to resume. */ ++ usb_hcd_resume_root_hub(hcd); ++ } ++ ++ return 0; ++} ++ ++/** ++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are ++ * stopped. ++ */ ++void hcd_stop(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++ dwc_otg_hcd_stop(dwc_otg_hcd); ++} ++ ++/** Returns the current frame number. */ ++static int get_frame_number(struct usb_hcd *hcd) ++{ ++ hprt0_data_t hprt0; ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); ++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) ++ return dwc_otg_hcd_get_frame_number(dwc_otg_hcd) >> 3; ++ else ++ return dwc_otg_hcd_get_frame_number(dwc_otg_hcd); ++} ++ ++#ifdef DEBUG ++static void dump_urb_info(struct urb *urb, char *fn_name) ++{ ++ DWC_PRINTF("%s, urb %p\n", fn_name, urb); ++ DWC_PRINTF(" Device address: %d\n", usb_pipedevice(urb->pipe)); ++ DWC_PRINTF(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe), ++ (usb_pipein(urb->pipe) ? "IN" : "OUT")); ++ DWC_PRINTF(" Endpoint type: %s\n", ( { ++ char *pipetype; ++ switch (usb_pipetype(urb->pipe)) { ++case PIPE_CONTROL: ++pipetype = "CONTROL"; break; case PIPE_BULK: ++pipetype = "BULK"; break; case PIPE_INTERRUPT: ++pipetype = "INTERRUPT"; break; case PIPE_ISOCHRONOUS: ++pipetype = "ISOCHRONOUS"; break; default: ++ pipetype = "UNKNOWN"; break;}; ++ pipetype;} ++ )) ; ++ DWC_PRINTF(" Speed: %s\n", ( { ++ char *speed; switch (urb->dev->speed) { ++case USB_SPEED_HIGH: ++speed = "HIGH"; break; case USB_SPEED_FULL: ++speed = "FULL"; break; case USB_SPEED_LOW: ++speed = "LOW"; break; default: ++ speed = "UNKNOWN"; break;}; ++ speed;} ++ )) ; ++ DWC_PRINTF(" Max packet size: %d\n", ++ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); ++ DWC_PRINTF(" Data buffer length: %d\n", urb->transfer_buffer_length); ++ DWC_PRINTF(" Transfer buffer: %p, Transfer DMA: %p\n", ++ urb->transfer_buffer, (void *)urb->transfer_dma); ++ DWC_PRINTF(" Setup buffer: %p, Setup DMA: %p\n", ++ urb->setup_packet, (void *)urb->setup_dma); ++ DWC_PRINTF(" Interval: %d\n", urb->interval); ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ int i; ++ for (i = 0; i < urb->number_of_packets; i++) { ++ DWC_PRINTF(" ISO Desc %d:\n", i); ++ DWC_PRINTF(" offset: %d, length %d\n", ++ urb->iso_frame_desc[i].offset, ++ urb->iso_frame_desc[i].length); ++ } ++ } ++} ++#endif ++ ++/** Starts processing a USB transfer request specified by a USB Request Block ++ * (URB). mem_flags indicates the type of memory allocation to use while ++ * processing this URB. */ ++static int dwc_otg_urb_enqueue(struct usb_hcd *hcd, ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ struct usb_host_endpoint *ep, ++#endif ++ struct urb *urb, gfp_t mem_flags) ++{ ++ int retval = 0; ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28) ++ struct usb_host_endpoint *ep = urb->ep; ++#endif ++ dwc_irqflags_t irqflags; ++ void **ref_ep_hcpriv = &ep->hcpriv; ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ dwc_otg_hcd_urb_t *dwc_otg_urb; ++ int i; ++ int alloc_bandwidth = 0; ++ uint8_t ep_type = 0; ++ uint32_t flags = 0; ++ void *buf; ++ ++#ifdef DEBUG ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ dump_urb_info(urb, "dwc_otg_urb_enqueue"); ++ } ++#endif ++ ++ if (!urb->transfer_buffer && urb->transfer_buffer_length) ++ return -EINVAL; ++ ++ if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) ++ || (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { ++ if (!dwc_otg_hcd_is_bandwidth_allocated ++ (dwc_otg_hcd, ref_ep_hcpriv)) { ++ alloc_bandwidth = 1; ++ } ++ } ++ ++ switch (usb_pipetype(urb->pipe)) { ++ case PIPE_CONTROL: ++ ep_type = USB_ENDPOINT_XFER_CONTROL; ++ break; ++ case PIPE_ISOCHRONOUS: ++ ep_type = USB_ENDPOINT_XFER_ISOC; ++ break; ++ case PIPE_BULK: ++ ep_type = USB_ENDPOINT_XFER_BULK; ++ break; ++ case PIPE_INTERRUPT: ++ ep_type = USB_ENDPOINT_XFER_INT; ++ break; ++ default: ++ DWC_WARN("Wrong EP type - %d\n", usb_pipetype(urb->pipe)); ++ } ++ ++ /* # of packets is often 0 - do we really need to call this then? */ ++ dwc_otg_urb = dwc_otg_hcd_urb_alloc(dwc_otg_hcd, ++ urb->number_of_packets, ++ mem_flags == GFP_ATOMIC ? 1 : 0); ++ ++ if(dwc_otg_urb == NULL) ++ return -ENOMEM; ++ ++ if (!dwc_otg_urb && urb->number_of_packets) ++ return -ENOMEM; ++ ++ dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_urb, usb_pipedevice(urb->pipe), ++ usb_pipeendpoint(urb->pipe), ep_type, ++ usb_pipein(urb->pipe), ++ usb_maxpacket(urb->dev, urb->pipe, ++ !(usb_pipein(urb->pipe)))); ++ ++ buf = urb->transfer_buffer; ++ if (hcd->self.uses_dma && !buf && urb->transfer_buffer_length) { ++ /* ++ * Calculate virtual address from physical address, ++ * because some class driver may not fill transfer_buffer. ++ * In Buffer DMA mode virual address is used, ++ * when handling non DWORD aligned buffers. ++ */ ++ buf = (void *)__bus_to_virt((unsigned long)urb->transfer_dma); ++ dev_warn_once(&urb->dev->dev, ++ "USB transfer_buffer was NULL, will use __bus_to_virt(%pad)=%p\n", ++ &urb->transfer_dma, buf); ++ } ++ ++ if (!(urb->transfer_flags & URB_NO_INTERRUPT)) ++ flags |= URB_GIVEBACK_ASAP; ++ if (urb->transfer_flags & URB_ZERO_PACKET) ++ flags |= URB_SEND_ZERO_PACKET; ++ ++ dwc_otg_hcd_urb_set_params(dwc_otg_urb, urb, buf, ++ urb->transfer_dma, ++ urb->transfer_buffer_length, ++ urb->setup_packet, ++ urb->setup_dma, flags, urb->interval); ++ ++ for (i = 0; i < urb->number_of_packets; ++i) { ++ dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_urb, i, ++ urb-> ++ iso_frame_desc[i].offset, ++ urb-> ++ iso_frame_desc[i].length); ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &irqflags); ++ urb->hcpriv = dwc_otg_urb; ++#if USB_URB_EP_LINKING ++ retval = usb_hcd_link_urb_to_ep(hcd, urb); ++ if (0 == retval) ++#endif ++ { ++ retval = dwc_otg_hcd_urb_enqueue(dwc_otg_hcd, dwc_otg_urb, ++ /*(dwc_otg_qh_t **)*/ ++ ref_ep_hcpriv, 1); ++ if (0 == retval) { ++ if (alloc_bandwidth) { ++ allocate_bus_bandwidth(hcd, ++ dwc_otg_hcd_get_ep_bandwidth( ++ dwc_otg_hcd, *ref_ep_hcpriv), ++ urb); ++ } ++ } else { ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG dwc_otg_hcd_urb_enqueue failed rc %d\n", retval); ++#if USB_URB_EP_LINKING ++ usb_hcd_unlink_urb_from_ep(hcd, urb); ++#endif ++ DWC_FREE(dwc_otg_urb); ++ urb->hcpriv = NULL; ++ if (retval == -DWC_E_NO_DEVICE) ++ retval = -ENODEV; ++ } ++ } ++#if USB_URB_EP_LINKING ++ else ++ { ++ DWC_FREE(dwc_otg_urb); ++ urb->hcpriv = NULL; ++ } ++#endif ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, irqflags); ++ return retval; ++} ++ ++/** Aborts/cancels a USB transfer request. Always returns 0 to indicate ++ * success. */ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) ++#else ++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) ++#endif ++{ ++ dwc_irqflags_t flags; ++ dwc_otg_hcd_t *dwc_otg_hcd; ++ int rc; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n"); ++ ++ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++#ifdef DEBUG ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ dump_urb_info(urb, "dwc_otg_urb_dequeue"); ++ } ++#endif ++ ++ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); ++ rc = usb_hcd_check_unlink_urb(hcd, urb, status); ++ if (0 == rc) { ++ if(urb->hcpriv != NULL) { ++ dwc_otg_hcd_urb_dequeue(dwc_otg_hcd, ++ (dwc_otg_hcd_urb_t *)urb->hcpriv); ++ ++ DWC_FREE(urb->hcpriv); ++ urb->hcpriv = NULL; ++ } ++ } ++ ++ if (0 == rc) { ++ /* Higher layer software sets URB status. */ ++#if USB_URB_EP_LINKING ++ usb_hcd_unlink_urb_from_ep(hcd, urb); ++#endif ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); ++ ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ usb_hcd_giveback_urb(hcd, urb); ++#else ++ usb_hcd_giveback_urb(hcd, urb, status); ++#endif ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ DWC_PRINTF("Called usb_hcd_giveback_urb() \n"); ++ DWC_PRINTF(" 1urb->status = %d\n", urb->status); ++ } ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue OK\n"); ++ } else { ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue failed - rc %d\n", ++ rc); ++ } ++ ++ return rc; ++} ++ ++/* Frees resources in the DWC_otg controller related to a given endpoint. Also ++ * clears state in the HCD related to the endpoint. Any URBs for the endpoint ++ * must already be dequeued. */ ++static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++ DWC_DEBUGPL(DBG_HCD, ++ "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, " ++ "endpoint=%d\n", ep->desc.bEndpointAddress, ++ dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress)); ++ dwc_otg_hcd_endpoint_disable(dwc_otg_hcd, ep->hcpriv, 250); ++ ep->hcpriv = NULL; ++} ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) ++/* Resets endpoint specific parameter values, in current version used to reset ++ * the data toggle(as a WA). This function can be called from usb_clear_halt routine */ ++static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) ++{ ++ dwc_irqflags_t flags; ++ struct usb_device *udev = NULL; ++ int epnum = usb_endpoint_num(&ep->desc); ++ int is_out = usb_endpoint_dir_out(&ep->desc); ++ int is_control = usb_endpoint_xfer_control(&ep->desc); ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ struct device *dev = DWC_OTG_OS_GETDEV(dwc_otg_hcd->otg_dev->os_dep); ++ ++ if (dev) ++ udev = to_usb_device(dev); ++ else ++ return; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP RESET: Endpoint Num=0x%02d\n", epnum); ++ ++ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); ++ usb_settoggle(udev, epnum, is_out, 0); ++ if (is_control) ++ usb_settoggle(udev, epnum, !is_out, 0); ++ ++ if (ep->hcpriv) { ++ dwc_otg_hcd_endpoint_reset(dwc_otg_hcd, ep->hcpriv); ++ } ++ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); ++} ++#endif ++ ++/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if ++ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid ++ * interrupt. ++ * ++ * This function is called by the USB core when an interrupt occurs */ ++static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ int32_t retval = dwc_otg_hcd_handle_intr(dwc_otg_hcd); ++ if (retval != 0) { ++ S3C2410X_CLEAR_EINTPEND(); ++ } ++ return IRQ_RETVAL(retval); ++} ++ ++/** Creates Status Change bitmap for the root hub and root port. The bitmap is ++ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 ++ * is the status change indicator for the single root port. Returns 1 if either ++ * change indicator is 1, otherwise returns 0. */ ++int hub_status_data(struct usb_hcd *hcd, char *buf) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++ buf[0] = 0; ++ buf[0] |= (dwc_otg_hcd_is_status_changed(dwc_otg_hcd, 1)) << 1; ++ ++ return (buf[0] != 0); ++} ++ ++/** Handles hub class-specific requests. */ ++int hub_control(struct usb_hcd *hcd, ++ u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) ++{ ++ int retval; ++ ++ retval = dwc_otg_hcd_hub_control(hcd_to_dwc_otg_hcd(hcd), ++ typeReq, wValue, wIndex, buf, wLength); ++ ++ switch (retval) { ++ case -DWC_E_INVALID: ++ retval = -EINVAL; ++ break; ++ } ++ ++ return retval; ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c +@@ -0,0 +1,963 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_queue.c $ ++ * $Revision: #44 $ ++ * $Date: 2011/10/26 $ ++ * $Change: 1873028 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** ++ * @file ++ * ++ * This file contains the functions to manage Queue Heads and Queue ++ * Transfer Descriptors. ++ */ ++ ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++ ++extern bool microframe_schedule; ++ ++/** ++ * Free each QTD in the QH's QTD-list then free the QH. QH should already be ++ * removed from a list. QTD list should already be empty if called from URB ++ * Dequeue. ++ * ++ * @param hcd HCD instance. ++ * @param qh The QH to free. ++ */ ++void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ dwc_otg_qtd_t *qtd, *qtd_tmp; ++ dwc_irqflags_t flags; ++ uint32_t buf_size = 0; ++ uint8_t *align_buf_virt = NULL; ++ dwc_dma_t align_buf_dma; ++ struct device *dev = dwc_otg_hcd_to_dev(hcd); ++ ++ /* Free each QTD in the QTD list */ ++ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); ++ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) { ++ DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry); ++ dwc_otg_hcd_qtd_free(qtd); ++ } ++ ++ if (hcd->core_if->dma_desc_enable) { ++ dwc_otg_hcd_qh_free_ddma(hcd, qh); ++ } else if (qh->dw_align_buf) { ++ if (qh->ep_type == UE_ISOCHRONOUS) { ++ buf_size = 4096; ++ } else { ++ buf_size = hcd->core_if->core_params->max_transfer_size; ++ } ++ align_buf_virt = qh->dw_align_buf; ++ align_buf_dma = qh->dw_align_buf_dma; ++ } ++ ++ DWC_FREE(qh); ++ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); ++ if (align_buf_virt) ++ DWC_DMA_FREE(dev, buf_size, align_buf_virt, align_buf_dma); ++ return; ++} ++ ++#define BitStuffTime(bytecount) ((8 * 7* bytecount) / 6) ++#define HS_HOST_DELAY 5 /* nanoseconds */ ++#define FS_LS_HOST_DELAY 1000 /* nanoseconds */ ++#define HUB_LS_SETUP 333 /* nanoseconds */ ++#define NS_TO_US(ns) ((ns + 500) / 1000) ++ /* convert & round nanoseconds to microseconds */ ++ ++static uint32_t calc_bus_time(int speed, int is_in, int is_isoc, int bytecount) ++{ ++ unsigned long retval; ++ ++ switch (speed) { ++ case USB_SPEED_HIGH: ++ if (is_isoc) { ++ retval = ++ ((38 * 8 * 2083) + ++ (2083 * (3 + BitStuffTime(bytecount)))) / 1000 + ++ HS_HOST_DELAY; ++ } else { ++ retval = ++ ((55 * 8 * 2083) + ++ (2083 * (3 + BitStuffTime(bytecount)))) / 1000 + ++ HS_HOST_DELAY; ++ } ++ break; ++ case USB_SPEED_FULL: ++ if (is_isoc) { ++ retval = ++ (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000; ++ if (is_in) { ++ retval = 7268 + FS_LS_HOST_DELAY + retval; ++ } else { ++ retval = 6265 + FS_LS_HOST_DELAY + retval; ++ } ++ } else { ++ retval = ++ (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000; ++ retval = 9107 + FS_LS_HOST_DELAY + retval; ++ } ++ break; ++ case USB_SPEED_LOW: ++ if (is_in) { ++ retval = ++ (67667 * (31 + 10 * BitStuffTime(bytecount))) / ++ 1000; ++ retval = ++ 64060 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY + ++ retval; ++ } else { ++ retval = ++ (66700 * (31 + 10 * BitStuffTime(bytecount))) / ++ 1000; ++ retval = ++ 64107 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY + ++ retval; ++ } ++ break; ++ default: ++ DWC_WARN("Unknown device speed\n"); ++ retval = -1; ++ } ++ ++ return NS_TO_US(retval); ++} ++ ++/** ++ * Initializes a QH structure. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh The QH to init. ++ * @param urb Holds the information about the device/endpoint that we need ++ * to initialize the QH. ++ */ ++#define SCHEDULE_SLOP 10 ++void qh_init(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, dwc_otg_hcd_urb_t * urb) ++{ ++ char *speed, *type; ++ int dev_speed; ++ uint32_t hub_addr, hub_port; ++ ++ dwc_memset(qh, 0, sizeof(dwc_otg_qh_t)); ++ ++ /* Initialize QH */ ++ qh->ep_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); ++ qh->ep_is_in = dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0; ++ ++ qh->data_toggle = DWC_OTG_HC_PID_DATA0; ++ qh->maxp = dwc_otg_hcd_get_mps(&urb->pipe_info); ++ DWC_CIRCLEQ_INIT(&qh->qtd_list); ++ DWC_LIST_INIT(&qh->qh_list_entry); ++ qh->channel = NULL; ++ ++ /* FS/LS Enpoint on HS Hub ++ * NOT virtual root hub */ ++ dev_speed = hcd->fops->speed(hcd, urb->priv); ++ ++ hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &hub_port); ++ qh->do_split = 0; ++ if (microframe_schedule) ++ qh->speed = dev_speed; ++ ++ qh->nak_frame = 0xffff; ++ ++ if (((dev_speed == USB_SPEED_LOW) || ++ (dev_speed == USB_SPEED_FULL)) && ++ (hub_addr != 0 && hub_addr != 1)) { ++ DWC_DEBUGPL(DBG_HCD, ++ "QH init: EP %d: TT found at hub addr %d, for port %d\n", ++ dwc_otg_hcd_get_ep_num(&urb->pipe_info), hub_addr, ++ hub_port); ++ qh->do_split = 1; ++ qh->skip_count = 0; ++ } ++ ++ if (qh->ep_type == UE_INTERRUPT || qh->ep_type == UE_ISOCHRONOUS) { ++ /* Compute scheduling parameters once and save them. */ ++ hprt0_data_t hprt; ++ ++ /** @todo Account for split transfers in the bus time. */ ++ int bytecount = ++ dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp); ++ ++ qh->usecs = ++ calc_bus_time((qh->do_split ? USB_SPEED_HIGH : dev_speed), ++ qh->ep_is_in, (qh->ep_type == UE_ISOCHRONOUS), ++ bytecount); ++ /* Start in a slightly future (micro)frame. */ ++ qh->sched_frame = dwc_frame_num_inc(hcd->frame_number, ++ SCHEDULE_SLOP); ++ qh->interval = urb->interval; ++ ++#if 0 ++ /* Increase interrupt polling rate for debugging. */ ++ if (qh->ep_type == UE_INTERRUPT) { ++ qh->interval = 8; ++ } ++#endif ++ hprt.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0); ++ if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) && ++ ((dev_speed == USB_SPEED_LOW) || ++ (dev_speed == USB_SPEED_FULL))) { ++ qh->interval *= 8; ++ qh->sched_frame |= 0x7; ++ qh->start_split_frame = qh->sched_frame; ++ } ++ ++ } ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n"); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", qh); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n", ++ dwc_otg_hcd_get_dev_addr(&urb->pipe_info)); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n", ++ dwc_otg_hcd_get_ep_num(&urb->pipe_info), ++ dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT"); ++ switch (dev_speed) { ++ case USB_SPEED_LOW: ++ qh->dev_speed = DWC_OTG_EP_SPEED_LOW; ++ speed = "low"; ++ break; ++ case USB_SPEED_FULL: ++ qh->dev_speed = DWC_OTG_EP_SPEED_FULL; ++ speed = "full"; ++ break; ++ case USB_SPEED_HIGH: ++ qh->dev_speed = DWC_OTG_EP_SPEED_HIGH; ++ speed = "high"; ++ break; ++ default: ++ speed = "?"; ++ break; ++ } ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n", speed); ++ ++ switch (qh->ep_type) { ++ case UE_ISOCHRONOUS: ++ type = "isochronous"; ++ break; ++ case UE_INTERRUPT: ++ type = "interrupt"; ++ break; ++ case UE_CONTROL: ++ type = "control"; ++ break; ++ case UE_BULK: ++ type = "bulk"; ++ break; ++ default: ++ type = "?"; ++ break; ++ } ++ ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n", type); ++ ++#ifdef DEBUG ++ if (qh->ep_type == UE_INTERRUPT) { ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n", ++ qh->usecs); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n", ++ qh->interval); ++ } ++#endif ++ ++} ++ ++/** ++ * This function allocates and initializes a QH. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param urb Holds the information about the device/endpoint that we need ++ * to initialize the QH. ++ * @param atomic_alloc Flag to do atomic allocation if needed ++ * ++ * @return Returns pointer to the newly allocated QH, or NULL on error. */ ++dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd, ++ dwc_otg_hcd_urb_t * urb, int atomic_alloc) ++{ ++ dwc_otg_qh_t *qh; ++ ++ /* Allocate memory */ ++ /** @todo add memflags argument */ ++ qh = dwc_otg_hcd_qh_alloc(atomic_alloc); ++ if (qh == NULL) { ++ DWC_ERROR("qh allocation failed"); ++ return NULL; ++ } ++ ++ qh_init(hcd, qh, urb); ++ ++ if (hcd->core_if->dma_desc_enable ++ && (dwc_otg_hcd_qh_init_ddma(hcd, qh) < 0)) { ++ dwc_otg_hcd_qh_free(hcd, qh); ++ return NULL; ++ } ++ ++ return qh; ++} ++ ++/* microframe_schedule=0 start */ ++ ++/** ++ * Checks that a channel is available for a periodic transfer. ++ * ++ * @return 0 if successful, negative error code otherise. ++ */ ++static int periodic_channel_available(dwc_otg_hcd_t * hcd) ++{ ++ /* ++ * Currently assuming that there is a dedicated host channnel for each ++ * periodic transaction plus at least one host channel for ++ * non-periodic transactions. ++ */ ++ int status; ++ int num_channels; ++ ++ num_channels = hcd->core_if->core_params->host_channels; ++ if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels) ++ && (hcd->periodic_channels < num_channels - 1)) { ++ status = 0; ++ } else { ++ DWC_INFO("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n", ++ __func__, num_channels, hcd->periodic_channels, hcd->non_periodic_channels); //NOTICE ++ status = -DWC_E_NO_SPACE; ++ } ++ ++ return status; ++} ++ ++/** ++ * Checks that there is sufficient bandwidth for the specified QH in the ++ * periodic schedule. For simplicity, this calculation assumes that all the ++ * transfers in the periodic schedule may occur in the same (micro)frame. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH containing periodic bandwidth required. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++static int check_periodic_bandwidth(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int status; ++ int16_t max_claimed_usecs; ++ ++ status = 0; ++ ++ if ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) || qh->do_split) { ++ /* ++ * High speed mode. ++ * Max periodic usecs is 80% x 125 usec = 100 usec. ++ */ ++ ++ max_claimed_usecs = 100 - qh->usecs; ++ } else { ++ /* ++ * Full speed mode. ++ * Max periodic usecs is 90% x 1000 usec = 900 usec. ++ */ ++ max_claimed_usecs = 900 - qh->usecs; ++ } ++ ++ if (hcd->periodic_usecs > max_claimed_usecs) { ++ DWC_INFO("%s: already claimed usecs %d, required usecs %d\n", __func__, hcd->periodic_usecs, qh->usecs); //NOTICE ++ status = -DWC_E_NO_SPACE; ++ } ++ ++ return status; ++} ++ ++/* microframe_schedule=0 end */ ++ ++/** ++ * Microframe scheduler ++ * track the total use in hcd->frame_usecs ++ * keep each qh use in qh->frame_usecs ++ * when surrendering the qh then donate the time back ++ */ ++const unsigned short max_uframe_usecs[]={ 100, 100, 100, 100, 100, 100, 30, 0 }; ++ ++/* ++ * called from dwc_otg_hcd.c:dwc_otg_hcd_init ++ */ ++int init_hcd_usecs(dwc_otg_hcd_t *_hcd) ++{ ++ int i; ++ for (i=0; i<8; i++) { ++ _hcd->frame_usecs[i] = max_uframe_usecs[i]; ++ } ++ return 0; ++} ++ ++static int find_single_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) ++{ ++ int i; ++ unsigned short utime; ++ int t_left; ++ int ret; ++ int done; ++ ++ ret = -1; ++ utime = _qh->usecs; ++ t_left = utime; ++ i = 0; ++ done = 0; ++ while (done == 0) { ++ /* At the start _hcd->frame_usecs[i] = max_uframe_usecs[i]; */ ++ if (utime <= _hcd->frame_usecs[i]) { ++ _hcd->frame_usecs[i] -= utime; ++ _qh->frame_usecs[i] += utime; ++ t_left -= utime; ++ ret = i; ++ done = 1; ++ return ret; ++ } else { ++ i++; ++ if (i == 8) { ++ done = 1; ++ ret = -1; ++ } ++ } ++ } ++ return ret; ++ } ++ ++/* ++ * use this for FS apps that can span multiple uframes ++ */ ++static int find_multi_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) ++{ ++ int i; ++ int j; ++ unsigned short utime; ++ int t_left; ++ int ret; ++ int done; ++ unsigned short xtime; ++ ++ ret = -1; ++ utime = _qh->usecs; ++ t_left = utime; ++ i = 0; ++ done = 0; ++loop: ++ while (done == 0) { ++ if(_hcd->frame_usecs[i] <= 0) { ++ i++; ++ if (i == 8) { ++ done = 1; ++ ret = -1; ++ } ++ goto loop; ++ } ++ ++ /* ++ * we need n consecutive slots ++ * so use j as a start slot j plus j+1 must be enough time (for now) ++ */ ++ xtime= _hcd->frame_usecs[i]; ++ for (j = i+1 ; j < 8 ; j++ ) { ++ /* ++ * if we add this frame remaining time to xtime we may ++ * be OK, if not we need to test j for a complete frame ++ */ ++ if ((xtime+_hcd->frame_usecs[j]) < utime) { ++ if (_hcd->frame_usecs[j] < max_uframe_usecs[j]) { ++ j = 8; ++ ret = -1; ++ continue; ++ } ++ } ++ if (xtime >= utime) { ++ ret = i; ++ j = 8; /* stop loop with a good value ret */ ++ continue; ++ } ++ /* add the frame time to x time */ ++ xtime += _hcd->frame_usecs[j]; ++ /* we must have a fully available next frame or break */ ++ if ((xtime < utime) ++ && (_hcd->frame_usecs[j] == max_uframe_usecs[j])) { ++ ret = -1; ++ j = 8; /* stop loop with a bad value ret */ ++ continue; ++ } ++ } ++ if (ret >= 0) { ++ t_left = utime; ++ for (j = i; (t_left>0) && (j < 8); j++ ) { ++ t_left -= _hcd->frame_usecs[j]; ++ if ( t_left <= 0 ) { ++ _qh->frame_usecs[j] += _hcd->frame_usecs[j] + t_left; ++ _hcd->frame_usecs[j]= -t_left; ++ ret = i; ++ done = 1; ++ } else { ++ _qh->frame_usecs[j] += _hcd->frame_usecs[j]; ++ _hcd->frame_usecs[j] = 0; ++ } ++ } ++ } else { ++ i++; ++ if (i == 8) { ++ done = 1; ++ ret = -1; ++ } ++ } ++ } ++ return ret; ++} ++ ++static int find_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) ++{ ++ int ret; ++ ret = -1; ++ ++ if (_qh->speed == USB_SPEED_HIGH) { ++ /* if this is a hs transaction we need a full frame */ ++ ret = find_single_uframe(_hcd, _qh); ++ } else { ++ /* if this is a fs transaction we may need a sequence of frames */ ++ ret = find_multi_uframe(_hcd, _qh); ++ } ++ return ret; ++} ++ ++/** ++ * Checks that the max transfer size allowed in a host channel is large enough ++ * to handle the maximum data transfer in a single (micro)frame for a periodic ++ * transfer. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH for a periodic endpoint. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++static int check_max_xfer_size(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int status; ++ uint32_t max_xfer_size; ++ uint32_t max_channel_xfer_size; ++ ++ status = 0; ++ ++ max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp); ++ max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size; ++ ++ if (max_xfer_size > max_channel_xfer_size) { ++ DWC_INFO("%s: Periodic xfer length %d > " "max xfer length for channel %d\n", ++ __func__, max_xfer_size, max_channel_xfer_size); //NOTICE ++ status = -DWC_E_NO_SPACE; ++ } ++ ++ return status; ++} ++ ++ ++ ++/** ++ * Schedules an interrupt or isochronous transfer in the periodic schedule. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH for the periodic transfer. The QH should already contain the ++ * scheduling information. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++static int schedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int status = 0; ++ ++ if (microframe_schedule) { ++ int frame; ++ status = find_uframe(hcd, qh); ++ frame = -1; ++ if (status == 0) { ++ frame = 7; ++ } else { ++ if (status > 0 ) ++ frame = status-1; ++ } ++ ++ /* Set the new frame up */ ++ if (frame > -1) { ++ qh->sched_frame &= ~0x7; ++ qh->sched_frame |= (frame & 7); ++ } ++ ++ if (status != -1) ++ status = 0; ++ } else { ++ status = periodic_channel_available(hcd); ++ if (status) { ++ DWC_INFO("%s: No host channel available for periodic " "transfer.\n", __func__); //NOTICE ++ return status; ++ } ++ ++ status = check_periodic_bandwidth(hcd, qh); ++ } ++ if (status) { ++ DWC_INFO("%s: Insufficient periodic bandwidth for " ++ "periodic transfer.\n", __func__); ++ return status; ++ } ++ status = check_max_xfer_size(hcd, qh); ++ if (status) { ++ DWC_INFO("%s: Channel max transfer size too small " ++ "for periodic transfer.\n", __func__); ++ return status; ++ } ++ ++ if (hcd->core_if->dma_desc_enable) { ++ /* Don't rely on SOF and start in ready schedule */ ++ DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_ready, &qh->qh_list_entry); ++ } ++ else { ++ if(fiq_enable && (DWC_LIST_EMPTY(&hcd->periodic_sched_inactive) || dwc_frame_num_le(qh->sched_frame, hcd->fiq_state->next_sched_frame))) ++ { ++ hcd->fiq_state->next_sched_frame = qh->sched_frame; ++ ++ } ++ /* Always start in the inactive schedule. */ ++ DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_inactive, &qh->qh_list_entry); ++ } ++ ++ if (!microframe_schedule) { ++ /* Reserve the periodic channel. */ ++ hcd->periodic_channels++; ++ } ++ ++ /* Update claimed usecs per (micro)frame. */ ++ hcd->periodic_usecs += qh->usecs; ++ ++ return status; ++} ++ ++ ++/** ++ * This function adds a QH to either the non periodic or periodic schedule if ++ * it is not already in the schedule. If the QH is already in the schedule, no ++ * action is taken. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int status = 0; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) { ++ /* QH already in a schedule. */ ++ return status; ++ } ++ ++ /* Add the new QH to the appropriate schedule */ ++ if (dwc_qh_is_non_per(qh)) { ++ /* Always start in the inactive schedule. */ ++ DWC_LIST_INSERT_TAIL(&hcd->non_periodic_sched_inactive, ++ &qh->qh_list_entry); ++ //hcd->fiq_state->kick_np_queues = 1; ++ } else { ++ status = schedule_periodic(hcd, qh); ++ if ( !hcd->periodic_qh_count ) { ++ intr_mask.b.sofintr = 1; ++ if (fiq_enable) { ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&hcd->fiq_state->lock); ++ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, intr_mask.d32); ++ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } else { ++ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, intr_mask.d32); ++ } ++ } ++ hcd->periodic_qh_count++; ++ } ++ ++ return status; ++} ++ ++/** ++ * Removes an interrupt or isochronous transfer from the periodic schedule. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH for the periodic transfer. ++ */ ++static void deschedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ int i; ++ DWC_LIST_REMOVE_INIT(&qh->qh_list_entry); ++ ++ /* Update claimed usecs per (micro)frame. */ ++ hcd->periodic_usecs -= qh->usecs; ++ ++ if (!microframe_schedule) { ++ /* Release the periodic channel reservation. */ ++ hcd->periodic_channels--; ++ } else { ++ for (i = 0; i < 8; i++) { ++ hcd->frame_usecs[i] += qh->frame_usecs[i]; ++ qh->frame_usecs[i] = 0; ++ } ++ } ++} ++ ++/** ++ * Removes a QH from either the non-periodic or periodic schedule. Memory is ++ * not freed. ++ * ++ * @param hcd The HCD state structure. ++ * @param qh QH to remove from schedule. */ ++void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ if (DWC_LIST_EMPTY(&qh->qh_list_entry)) { ++ /* QH is not in a schedule. */ ++ return; ++ } ++ ++ if (dwc_qh_is_non_per(qh)) { ++ if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) { ++ hcd->non_periodic_qh_ptr = ++ hcd->non_periodic_qh_ptr->next; ++ } ++ DWC_LIST_REMOVE_INIT(&qh->qh_list_entry); ++ //if (!DWC_LIST_EMPTY(&hcd->non_periodic_sched_inactive)) ++ // hcd->fiq_state->kick_np_queues = 1; ++ } else { ++ deschedule_periodic(hcd, qh); ++ hcd->periodic_qh_count--; ++ if( !hcd->periodic_qh_count && !fiq_fsm_enable ) { ++ intr_mask.b.sofintr = 1; ++ if (fiq_enable) { ++ local_fiq_disable(); ++ fiq_fsm_spin_lock(&hcd->fiq_state->lock); ++ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, 0); ++ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); ++ local_fiq_enable(); ++ } else { ++ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, 0); ++ } ++ } ++ } ++} ++ ++/** ++ * Deactivates a QH. For non-periodic QHs, removes the QH from the active ++ * non-periodic schedule. The QH is added to the inactive non-periodic ++ * schedule if any QTDs are still attached to the QH. ++ * ++ * For periodic QHs, the QH is removed from the periodic queued schedule. If ++ * there are any QTDs still attached to the QH, the QH is added to either the ++ * periodic inactive schedule or the periodic ready schedule and its next ++ * scheduled frame is calculated. The QH is placed in the ready schedule if ++ * the scheduled frame has been reached already. Otherwise it's placed in the ++ * inactive schedule. If there are no QTDs attached to the QH, the QH is ++ * completely removed from the periodic schedule. ++ */ ++void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, ++ int sched_next_periodic_split) ++{ ++ if (dwc_qh_is_non_per(qh)) { ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ /* Add back to inactive non-periodic schedule. */ ++ dwc_otg_hcd_qh_add(hcd, qh); ++ //hcd->fiq_state->kick_np_queues = 1; ++ } ++ } else { ++ uint16_t frame_number = dwc_otg_hcd_get_frame_number(hcd); ++ ++ if (qh->do_split) { ++ /* Schedule the next continuing periodic split transfer */ ++ if (sched_next_periodic_split) { ++ ++ qh->sched_frame = frame_number; ++ ++ if (dwc_frame_num_le(frame_number, ++ dwc_frame_num_inc ++ (qh->start_split_frame, ++ 1))) { ++ /* ++ * Allow one frame to elapse after start ++ * split microframe before scheduling ++ * complete split, but DONT if we are ++ * doing the next start split in the ++ * same frame for an ISOC out. ++ */ ++ if ((qh->ep_type != UE_ISOCHRONOUS) || ++ (qh->ep_is_in != 0)) { ++ qh->sched_frame = ++ dwc_frame_num_inc(qh->sched_frame, 1); ++ } ++ } ++ } else { ++ qh->sched_frame = ++ dwc_frame_num_inc(qh->start_split_frame, ++ qh->interval); ++ if (dwc_frame_num_le ++ (qh->sched_frame, frame_number)) { ++ qh->sched_frame = frame_number; ++ } ++ qh->sched_frame |= 0x7; ++ qh->start_split_frame = qh->sched_frame; ++ } ++ } else { ++ qh->sched_frame = ++ dwc_frame_num_inc(qh->sched_frame, qh->interval); ++ if (dwc_frame_num_le(qh->sched_frame, frame_number)) { ++ qh->sched_frame = frame_number; ++ } ++ } ++ ++ if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ } else { ++ /* ++ * Remove from periodic_sched_queued and move to ++ * appropriate queue. ++ */ ++ if ((microframe_schedule && dwc_frame_num_le(qh->sched_frame, frame_number)) || ++ (!microframe_schedule && qh->sched_frame == frame_number)) { ++ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready, ++ &qh->qh_list_entry); ++ } else { ++ if(fiq_enable && !dwc_frame_num_le(hcd->fiq_state->next_sched_frame, qh->sched_frame)) ++ { ++ hcd->fiq_state->next_sched_frame = qh->sched_frame; ++ } ++ ++ DWC_LIST_MOVE_HEAD ++ (&hcd->periodic_sched_inactive, ++ &qh->qh_list_entry); ++ } ++ } ++ } ++} ++ ++/** ++ * This function allocates and initializes a QTD. ++ * ++ * @param urb The URB to create a QTD from. Each URB-QTD pair will end up ++ * pointing to each other so each pair should have a unique correlation. ++ * @param atomic_alloc Flag to do atomic alloc if needed ++ * ++ * @return Returns pointer to the newly allocated QTD, or NULL on error. */ ++dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb, int atomic_alloc) ++{ ++ dwc_otg_qtd_t *qtd; ++ ++ qtd = dwc_otg_hcd_qtd_alloc(atomic_alloc); ++ if (qtd == NULL) { ++ return NULL; ++ } ++ ++ dwc_otg_hcd_qtd_init(qtd, urb); ++ return qtd; ++} ++ ++/** ++ * Initializes a QTD structure. ++ * ++ * @param qtd The QTD to initialize. ++ * @param urb The URB to use for initialization. */ ++void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb) ++{ ++ dwc_memset(qtd, 0, sizeof(dwc_otg_qtd_t)); ++ qtd->urb = urb; ++ if (dwc_otg_hcd_get_pipe_type(&urb->pipe_info) == UE_CONTROL) { ++ /* ++ * The only time the QTD data toggle is used is on the data ++ * phase of control transfers. This phase always starts with ++ * DATA1. ++ */ ++ qtd->data_toggle = DWC_OTG_HC_PID_DATA1; ++ qtd->control_phase = DWC_OTG_CONTROL_SETUP; ++ } ++ ++ /* start split */ ++ qtd->complete_split = 0; ++ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; ++ qtd->isoc_split_offset = 0; ++ qtd->in_process = 0; ++ ++ /* Store the qtd ptr in the urb to reference what QTD. */ ++ urb->qtd = qtd; ++ return; ++} ++ ++/** ++ * This function adds a QTD to the QTD-list of a QH. It will find the correct ++ * QH to place the QTD into. If it does not find a QH, then it will create a ++ * new QH. If the QH to which the QTD is added is not currently scheduled, it ++ * is placed into the proper schedule based on its EP type. ++ * HCD lock must be held and interrupts must be disabled on entry ++ * ++ * @param[in] qtd The QTD to add ++ * @param[in] hcd The DWC HCD structure ++ * @param[out] qh out parameter to return queue head ++ * @param atomic_alloc Flag to do atomic alloc if needed ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd, ++ dwc_otg_hcd_t * hcd, dwc_otg_qh_t ** qh, int atomic_alloc) ++{ ++ int retval = 0; ++ dwc_otg_hcd_urb_t *urb = qtd->urb; ++ ++ /* ++ * Get the QH which holds the QTD-list to insert to. Create QH if it ++ * doesn't exist. ++ */ ++ if (*qh == NULL) { ++ *qh = dwc_otg_hcd_qh_create(hcd, urb, atomic_alloc); ++ if (*qh == NULL) { ++ retval = -DWC_E_NO_MEMORY; ++ goto done; ++ } else { ++ if (fiq_enable) ++ hcd->fiq_state->kick_np_queues = 1; ++ } ++ } ++ retval = dwc_otg_hcd_qh_add(hcd, *qh); ++ if (retval == 0) { ++ DWC_CIRCLEQ_INSERT_TAIL(&((*qh)->qtd_list), qtd, ++ qtd_list_entry); ++ qtd->qh = *qh; ++ } ++done: ++ ++ return retval; ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h +@@ -0,0 +1,188 @@ ++#ifndef _DWC_OS_DEP_H_ ++#define _DWC_OS_DEP_H_ ++ ++/** ++ * @file ++ * ++ * This file contains OS dependent structures. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++# include ++#endif ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) ++# include ++#else ++# include ++#endif ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) ++# include ++#else ++# include ++#endif ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++# include ++#endif ++ ++#ifdef PCI_INTERFACE ++# include ++#endif ++ ++#ifdef LM_INTERFACE ++# include ++# include ++# include ++# include ++# if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) ++# include ++# include ++# include ++# include ++# else ++/* in 2.6.31, at least, we seem to have lost the generic LM infrastructure - ++ here we assume that the machine architecture provides definitions ++ in its own header ++*/ ++# include ++# include ++# endif ++#endif ++ ++#ifdef PLATFORM_INTERFACE ++#include ++#include ++#endif ++ ++/** The OS page size */ ++#define DWC_OS_PAGE_SIZE PAGE_SIZE ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) ++typedef int gfp_t; ++#endif ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) ++# define IRQF_SHARED SA_SHIRQ ++#endif ++ ++typedef struct os_dependent { ++ /** Base address returned from ioremap() */ ++ void *base; ++ ++ /** Register offset for Diagnostic API */ ++ uint32_t reg_offset; ++ ++ /** Base address for MPHI peripheral */ ++ void *mphi_base; ++ ++#ifdef LM_INTERFACE ++ struct lm_device *lmdev; ++#elif defined(PCI_INTERFACE) ++ struct pci_dev *pcidev; ++ ++ /** Start address of a PCI region */ ++ resource_size_t rsrc_start; ++ ++ /** Length address of a PCI region */ ++ resource_size_t rsrc_len; ++#elif defined(PLATFORM_INTERFACE) ++ struct platform_device *platformdev; ++#endif ++ ++} os_dependent_t; ++ ++#ifdef __cplusplus ++} ++#endif ++ ++ ++ ++/* Type for the our device on the chosen bus */ ++#if defined(LM_INTERFACE) ++typedef struct lm_device dwc_bus_dev_t; ++#elif defined(PCI_INTERFACE) ++typedef struct pci_dev dwc_bus_dev_t; ++#elif defined(PLATFORM_INTERFACE) ++typedef struct platform_device dwc_bus_dev_t; ++#endif ++ ++/* Helper macro to retrieve drvdata from the device on the chosen bus */ ++#if defined(LM_INTERFACE) ++#define DWC_OTG_BUSDRVDATA(_dev) lm_get_drvdata(_dev) ++#elif defined(PCI_INTERFACE) ++#define DWC_OTG_BUSDRVDATA(_dev) pci_get_drvdata(_dev) ++#elif defined(PLATFORM_INTERFACE) ++#define DWC_OTG_BUSDRVDATA(_dev) platform_get_drvdata(_dev) ++#endif ++ ++/** ++ * Helper macro returning the otg_device structure of a given struct device ++ * ++ * c.f. static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev) ++ */ ++#ifdef LM_INTERFACE ++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \ ++ struct lm_device *lm_dev = \ ++ container_of(_dev, struct lm_device, dev); \ ++ _var = lm_get_drvdata(lm_dev); \ ++ } while (0) ++ ++#elif defined(PCI_INTERFACE) ++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \ ++ _var = dev_get_drvdata(_dev); \ ++ } while (0) ++ ++#elif defined(PLATFORM_INTERFACE) ++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \ ++ struct platform_device *platform_dev = \ ++ container_of(_dev, struct platform_device, dev); \ ++ _var = platform_get_drvdata(platform_dev); \ ++ } while (0) ++#endif ++ ++ ++/** ++ * Helper macro returning the struct dev of the given struct os_dependent ++ * ++ * c.f. static struct device *dwc_otg_getdev(struct os_dependent *osdep) ++ */ ++#ifdef LM_INTERFACE ++#define DWC_OTG_OS_GETDEV(_osdep) \ ++ ((_osdep).lmdev == NULL? NULL: &(_osdep).lmdev->dev) ++#elif defined(PCI_INTERFACE) ++#define DWC_OTG_OS_GETDEV(_osdep) \ ++ ((_osdep).pci_dev == NULL? NULL: &(_osdep).pci_dev->dev) ++#elif defined(PLATFORM_INTERFACE) ++#define DWC_OTG_OS_GETDEV(_osdep) \ ++ ((_osdep).platformdev == NULL? NULL: &(_osdep).platformdev->dev) ++#endif ++ ++ ++ ++ ++#endif /* _DWC_OS_DEP_H_ */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd.c +@@ -0,0 +1,2725 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $ ++ * $Revision: #101 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++ ++/** @file ++ * This file implements PCD Core. All code in this file is portable and doesn't ++ * use any OS specific functions. ++ * PCD Core provides Interface, defined in ++ * header file, which can be used to implement OS specific PCD interface. ++ * ++ * An important function of the PCD is managing interrupts generated ++ * by the DWC_otg controller. The implementation of the DWC_otg device ++ * mode interrupt service routines is in dwc_otg_pcd_intr.c. ++ * ++ * @todo Add Device Mode test modes (Test J mode, Test K mode, etc). ++ * @todo Does it work when the request size is greater than DEPTSIZ ++ * transfer size ++ * ++ */ ++ ++#include "dwc_otg_pcd.h" ++ ++#ifdef DWC_UTE_CFI ++#include "dwc_otg_cfi.h" ++ ++extern int init_cfi(cfiobject_t * cfiobj); ++#endif ++ ++/** ++ * Choose endpoint from ep arrays using usb_ep structure. ++ */ ++static dwc_otg_pcd_ep_t *get_ep_from_handle(dwc_otg_pcd_t * pcd, void *handle) ++{ ++ int i; ++ if (pcd->ep0.priv == handle) { ++ return &pcd->ep0; ++ } ++ for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) { ++ if (pcd->in_ep[i].priv == handle) ++ return &pcd->in_ep[i]; ++ if (pcd->out_ep[i].priv == handle) ++ return &pcd->out_ep[i]; ++ } ++ ++ return NULL; ++} ++ ++/** ++ * This function completes a request. It call's the request call back. ++ */ ++void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req, ++ int32_t status) ++{ ++ unsigned stopped = ep->stopped; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(ep %p req %p)\n", __func__, ep, req); ++ DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry); ++ ++ /* don't modify queue heads during completion callback */ ++ ep->stopped = 1; ++ /* spin_unlock/spin_lock now done in fops->complete() */ ++ ep->pcd->fops->complete(ep->pcd, ep->priv, req->priv, status, ++ req->actual); ++ ++ if (ep->pcd->request_pending > 0) { ++ --ep->pcd->request_pending; ++ } ++ ++ ep->stopped = stopped; ++ DWC_FREE(req); ++} ++ ++/** ++ * This function terminates all the requsts in the EP request queue. ++ */ ++void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_pcd_request_t *req; ++ ++ ep->stopped = 1; ++ ++ /* called with irqs blocked?? */ ++ while (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ dwc_otg_request_done(ep, req, -DWC_E_SHUTDOWN); ++ } ++} ++ ++void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd, ++ const struct dwc_otg_pcd_function_ops *fops) ++{ ++ pcd->fops = fops; ++} ++ ++/** ++ * PCD Callback function for initializing the PCD when switching to ++ * device mode. ++ * ++ * @param p void pointer to the dwc_otg_pcd_t ++ */ ++static int32_t dwc_otg_pcd_start_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ /* ++ * Initialized the Core for Device mode. ++ */ ++ if (dwc_otg_is_device_mode(core_if)) { ++ dwc_otg_core_dev_init(core_if); ++ /* Set core_if's lock pointer to the pcd->lock */ ++ core_if->lock = pcd->lock; ++ } ++ return 1; ++} ++ ++/** CFI-specific buffer allocation function for EP */ ++#ifdef DWC_UTE_CFI ++uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr, ++ size_t buflen, int flags) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ ep = get_ep_from_handle(pcd, pep); ++ if (!ep) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ return pcd->cfi->ops.ep_alloc_buf(pcd->cfi, pcd, ep, addr, buflen, ++ flags); ++} ++#else ++uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr, ++ size_t buflen, int flags); ++#endif ++ ++/** ++ * PCD Callback function for notifying the PCD when resuming from ++ * suspend. ++ * ++ * @param p void pointer to the dwc_otg_pcd_t ++ */ ++static int32_t dwc_otg_pcd_resume_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; ++ ++ if (pcd->fops->resume) { ++ pcd->fops->resume(pcd); ++ } ++ ++ /* Stop the SRP timeout timer. */ ++ if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS) ++ || (!GET_CORE_IF(pcd)->core_params->i2c_enable)) { ++ if (GET_CORE_IF(pcd)->srp_timer_started) { ++ GET_CORE_IF(pcd)->srp_timer_started = 0; ++ DWC_TIMER_CANCEL(GET_CORE_IF(pcd)->srp_timer); ++ } ++ } ++ return 1; ++} ++ ++/** ++ * PCD Callback function for notifying the PCD device is suspended. ++ * ++ * @param p void pointer to the dwc_otg_pcd_t ++ */ ++static int32_t dwc_otg_pcd_suspend_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; ++ ++ if (pcd->fops->suspend) { ++ DWC_SPINUNLOCK(pcd->lock); ++ pcd->fops->suspend(pcd); ++ DWC_SPINLOCK(pcd->lock); ++ } ++ ++ return 1; ++} ++ ++/** ++ * PCD Callback function for stopping the PCD when switching to Host ++ * mode. ++ * ++ * @param p void pointer to the dwc_otg_pcd_t ++ */ ++static int32_t dwc_otg_pcd_stop_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; ++ extern void dwc_otg_pcd_stop(dwc_otg_pcd_t * _pcd); ++ ++ dwc_otg_pcd_stop(pcd); ++ return 1; ++} ++ ++/** ++ * PCD Callback structure for handling mode switching. ++ */ ++static dwc_otg_cil_callbacks_t pcd_callbacks = { ++ .start = dwc_otg_pcd_start_cb, ++ .stop = dwc_otg_pcd_stop_cb, ++ .suspend = dwc_otg_pcd_suspend_cb, ++ .resume_wakeup = dwc_otg_pcd_resume_cb, ++ .p = 0, /* Set at registration */ ++}; ++ ++/** ++ * This function allocates a DMA Descriptor chain for the Endpoint ++ * buffer to be used for a transfer to/from the specified endpoint. ++ */ ++dwc_otg_dev_dma_desc_t *dwc_otg_ep_alloc_desc_chain(struct device *dev, ++ dwc_dma_t * dma_desc_addr, ++ uint32_t count) ++{ ++ return DWC_DMA_ALLOC_ATOMIC(dev, count * sizeof(dwc_otg_dev_dma_desc_t), ++ dma_desc_addr); ++} ++ ++/** ++ * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc. ++ */ ++void dwc_otg_ep_free_desc_chain(struct device *dev, ++ dwc_otg_dev_dma_desc_t * desc_addr, ++ uint32_t dma_desc_addr, uint32_t count) ++{ ++ DWC_DMA_FREE(dev, count * sizeof(dwc_otg_dev_dma_desc_t), desc_addr, ++ dma_desc_addr); ++} ++ ++#ifdef DWC_EN_ISOC ++ ++/** ++ * This function initializes a descriptor chain for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * dwc_ep) ++{ ++ ++ dsts_data_t dsts = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ int i, j; ++ uint32_t len; ++ ++ if (dwc_ep->is_in) ++ dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval; ++ else ++ dwc_ep->desc_cnt = ++ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / ++ dwc_ep->bInterval; ++ ++ /** Allocate descriptors for double buffering */ ++ dwc_ep->iso_desc_addr = ++ dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr, ++ dwc_ep->desc_cnt * 2); ++ if (dwc_ep->desc_addr) { ++ DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__); ++ return; ++ } ++ ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ /** ISO OUT EP */ ++ if (dwc_ep->is_in == 0) { ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr; ++ dma_addr_t dma_ad; ++ uint32_t data_per_desc; ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[dwc_ep->num]; ++ int offset; ++ ++ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl; ++ dma_ad = (dma_addr_t) DWC_READ_REG32(&(out_regs->doepdma)); ++ ++ /** Buffer 0 descriptors setup */ ++ dma_ad = dwc_ep->dma_addr0; ++ ++ sts.b_iso_out.bs = BS_HOST_READY; ++ sts.b_iso_out.rxsts = 0; ++ sts.b_iso_out.l = 0; ++ sts.b_iso_out.sp = 0; ++ sts.b_iso_out.ioc = 0; ++ sts.b_iso_out.pid = 0; ++ sts.b_iso_out.framenum = 0; ++ ++ offset = 0; ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ ++ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { ++ uint32_t len = (j + 1) * dwc_ep->maxpacket; ++ if (len > dwc_ep->data_per_frame) ++ data_per_desc = ++ dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket; ++ else ++ data_per_desc = dwc_ep->maxpacket; ++ len = data_per_desc % 4; ++ if (len) ++ data_per_desc += 4 - len; ++ ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ } ++ ++ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { ++ uint32_t len = (j + 1) * dwc_ep->maxpacket; ++ if (len > dwc_ep->data_per_frame) ++ data_per_desc = ++ dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket; ++ else ++ data_per_desc = dwc_ep->maxpacket; ++ len = data_per_desc % 4; ++ if (len) ++ data_per_desc += 4 - len; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ ++ sts.b_iso_out.ioc = 1; ++ len = (j + 1) * dwc_ep->maxpacket; ++ if (len > dwc_ep->data_per_frame) ++ data_per_desc = ++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket; ++ else ++ data_per_desc = dwc_ep->maxpacket; ++ len = data_per_desc % 4; ++ if (len) ++ data_per_desc += 4 - len; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ dma_desc++; ++ ++ /** Buffer 1 descriptors setup */ ++ sts.b_iso_out.ioc = 0; ++ dma_ad = dwc_ep->dma_addr1; ++ ++ offset = 0; ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { ++ uint32_t len = (j + 1) * dwc_ep->maxpacket; ++ if (len > dwc_ep->data_per_frame) ++ data_per_desc = ++ dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket; ++ else ++ data_per_desc = dwc_ep->maxpacket; ++ len = data_per_desc % 4; ++ if (len) ++ data_per_desc += 4 - len; ++ ++ data_per_desc = ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ } ++ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ ++ sts.b_iso_out.ioc = 1; ++ sts.b_iso_out.l = 1; ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dwc_ep->next_frame = 0; ++ ++ /** Write dma_ad into DOEPDMA register */ ++ DWC_WRITE_REG32(&(out_regs->doepdma), ++ (uint32_t) dwc_ep->iso_dma_desc_addr); ++ ++ } ++ /** ISO IN EP */ ++ else { ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr; ++ dma_addr_t dma_ad; ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[dwc_ep->num]; ++ unsigned int frmnumber; ++ fifosize_data_t txfifosize, rxfifosize; ++ ++ txfifosize.d32 = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[dwc_ep->num]-> ++ dtxfsts); ++ rxfifosize.d32 = ++ DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); ++ ++ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ ++ dma_ad = dwc_ep->dma_addr0; ++ ++ dsts.d32 = ++ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ sts.b_iso_in.bs = BS_HOST_READY; ++ sts.b_iso_in.txsts = 0; ++ sts.b_iso_in.sp = ++ (dwc_ep->data_per_frame % dwc_ep->maxpacket) ? 1 : 0; ++ sts.b_iso_in.ioc = 0; ++ sts.b_iso_in.pid = dwc_ep->pkt_per_frm; ++ ++ frmnumber = dwc_ep->next_frame; ++ ++ sts.b_iso_in.framenum = frmnumber; ++ sts.b_iso_in.txbytes = dwc_ep->data_per_frame; ++ sts.b_iso_in.l = 0; ++ ++ /** Buffer 0 descriptors setup */ ++ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ dma_desc++; ++ ++ dma_ad += dwc_ep->data_per_frame; ++ sts.b_iso_in.framenum += dwc_ep->bInterval; ++ } ++ ++ sts.b_iso_in.ioc = 1; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++dma_desc; ++ ++ /** Buffer 1 descriptors setup */ ++ sts.b_iso_in.ioc = 0; ++ dma_ad = dwc_ep->dma_addr1; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ dma_desc++; ++ ++ dma_ad += dwc_ep->data_per_frame; ++ sts.b_iso_in.framenum += dwc_ep->bInterval; ++ ++ sts.b_iso_in.ioc = 0; ++ } ++ sts.b_iso_in.ioc = 1; ++ sts.b_iso_in.l = 1; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval; ++ ++ /** Write dma_ad into diepdma register */ ++ DWC_WRITE_REG32(&(in_regs->diepdma), ++ (uint32_t) dwc_ep->iso_dma_desc_addr); ++ } ++ /** Enable endpoint, clear nak */ ++ depctl.d32 = 0; ++ depctl.b.epena = 1; ++ depctl.b.usbactep = 1; ++ depctl.b.cnak = 1; ++ ++ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32); ++ depctl.d32 = DWC_READ_REG32(addr); ++} ++ ++/** ++ * This function initializes a descriptor chain for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep) ++{ ++ depctl_data_t depctl = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ ++ if (ep->is_in) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ } ++ ++ if (core_if->dma_enable == 0 || core_if->dma_desc_enable != 0) { ++ return; ++ } else { ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ ++ ep->xfer_len = ++ ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval; ++ ep->pkt_cnt = ++ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; ++ ep->xfer_count = 0; ++ ep->xfer_buff = ++ (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; ++ ep->dma_addr = ++ (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; ++ ++ if (ep->is_in) { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.mc = ep->pkt_per_frm; ++ deptsiz.b.xfersize = ep->xfer_len; ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ dieptsiz, deptsiz.d32); ++ ++ /* Write the DMA register */ ++ DWC_WRITE_REG32(& ++ (core_if->dev_if->in_ep_regs[ep->num]-> ++ diepdma), (uint32_t) ep->dma_addr); ++ ++ } else { ++ deptsiz.b.pktcnt = ++ (ep->xfer_len + (ep->maxpacket - 1)) / ++ ep->maxpacket; ++ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; ++ ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]-> ++ doeptsiz, deptsiz.d32); ++ ++ /* Write the DMA register */ ++ DWC_WRITE_REG32(& ++ (core_if->dev_if->out_ep_regs[ep->num]-> ++ doepdma), (uint32_t) ep->dma_addr); ++ ++ } ++ /** Enable endpoint, clear nak */ ++ depctl.d32 = 0; ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ ++ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32); ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for an EP and ++ * starts the transfer. For an IN transfer, the packets will be ++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, ++ * the packets are unloaded from the Rx FIFO in the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++ ++static void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * ep) ++{ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ if (ep->is_in) { ++ ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm; ++ } else { ++ ep->desc_cnt = ep->pkt_cnt; ++ } ++ dwc_otg_iso_ep_start_ddma_transfer(core_if, ep); ++ } else { ++ if (core_if->pti_enh_enable) { ++ dwc_otg_iso_ep_start_buf_transfer(core_if, ep); ++ } else { ++ ep->cur_pkt_addr = ++ (ep->proc_buf_num) ? ep->xfer_buff1 : ep-> ++ xfer_buff0; ++ ep->cur_pkt_dma_addr = ++ (ep->proc_buf_num) ? ep->dma_addr1 : ep-> ++ dma_addr0; ++ dwc_otg_iso_ep_start_frm_transfer(core_if, ep); ++ } ++ } ++ } else { ++ ep->cur_pkt_addr = ++ (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; ++ ep->cur_pkt_dma_addr = ++ (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; ++ dwc_otg_iso_ep_start_frm_transfer(core_if, ep); ++ } ++} ++ ++/** ++ * This function stops transfer for an EP and ++ * resets the ep's variables. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++ ++void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ depctl_data_t depctl = {.d32 = 0 }; ++ volatile uint32_t *addr; ++ ++ if (ep->is_in == 1) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ } ++ ++ /* disable the ep */ ++ depctl.d32 = DWC_READ_REG32(addr); ++ ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ ++ DWC_WRITE_REG32(addr, depctl.d32); ++ ++ if (core_if->dma_desc_enable && ++ ep->iso_desc_addr && ep->iso_dma_desc_addr) { ++ dwc_otg_ep_free_desc_chain(ep->iso_desc_addr, ++ ep->iso_dma_desc_addr, ++ ep->desc_cnt * 2); ++ } ++ ++ /* reset varibales */ ++ ep->dma_addr0 = 0; ++ ep->dma_addr1 = 0; ++ ep->xfer_buff0 = 0; ++ ep->xfer_buff1 = 0; ++ ep->data_per_frame = 0; ++ ep->data_pattern_frame = 0; ++ ep->sync_frame = 0; ++ ep->buf_proc_intrvl = 0; ++ ep->bInterval = 0; ++ ep->proc_buf_num = 0; ++ ep->pkt_per_frm = 0; ++ ep->pkt_per_frm = 0; ++ ep->desc_cnt = 0; ++ ep->iso_desc_addr = 0; ++ ep->iso_dma_desc_addr = 0; ++} ++ ++int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf0, uint8_t * buf1, dwc_dma_t dma0, ++ dwc_dma_t dma1, int sync_frame, int dp_frame, ++ int data_per_frame, int start_frame, ++ int buf_proc_intrvl, void *req_handle, ++ int atomic_alloc) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_irqflags_t flags = 0; ++ dwc_ep_t *dwc_ep; ++ int32_t frm_data; ++ dsts_data_t dsts; ++ dwc_otg_core_if_t *core_if; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ ++ if (!ep || !ep->desc || ep->dwc_ep.num == 0) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ core_if = GET_CORE_IF(pcd); ++ dwc_ep = &ep->dwc_ep; ++ ++ if (ep->iso_req_handle) { ++ DWC_WARN("ISO request in progress\n"); ++ } ++ ++ dwc_ep->dma_addr0 = dma0; ++ dwc_ep->dma_addr1 = dma1; ++ ++ dwc_ep->xfer_buff0 = buf0; ++ dwc_ep->xfer_buff1 = buf1; ++ ++ dwc_ep->data_per_frame = data_per_frame; ++ ++ /** @todo - pattern data support is to be implemented in the future */ ++ dwc_ep->data_pattern_frame = dp_frame; ++ dwc_ep->sync_frame = sync_frame; ++ ++ dwc_ep->buf_proc_intrvl = buf_proc_intrvl; ++ ++ dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1); ++ ++ dwc_ep->proc_buf_num = 0; ++ ++ dwc_ep->pkt_per_frm = 0; ++ frm_data = ep->dwc_ep.data_per_frame; ++ while (frm_data > 0) { ++ dwc_ep->pkt_per_frm++; ++ frm_data -= ep->dwc_ep.maxpacket; ++ } ++ ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ if (start_frame == -1) { ++ dwc_ep->next_frame = dsts.b.soffn + 1; ++ if (dwc_ep->bInterval != 1) { ++ dwc_ep->next_frame = ++ dwc_ep->next_frame + (dwc_ep->bInterval - 1 - ++ dwc_ep->next_frame % ++ dwc_ep->bInterval); ++ } ++ } else { ++ dwc_ep->next_frame = start_frame; ++ } ++ ++ if (!core_if->pti_enh_enable) { ++ dwc_ep->pkt_cnt = ++ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / ++ dwc_ep->bInterval; ++ } else { ++ dwc_ep->pkt_cnt = ++ (dwc_ep->data_per_frame * ++ (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval) ++ - 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket; ++ } ++ ++ if (core_if->dma_desc_enable) { ++ dwc_ep->desc_cnt = ++ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / ++ dwc_ep->bInterval; ++ } ++ ++ if (atomic_alloc) { ++ dwc_ep->pkt_info = ++ DWC_ALLOC_ATOMIC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); ++ } else { ++ dwc_ep->pkt_info = ++ DWC_ALLOC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); ++ } ++ if (!dwc_ep->pkt_info) { ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return -DWC_E_NO_MEMORY; ++ } ++ if (core_if->pti_enh_enable) { ++ dwc_memset(dwc_ep->pkt_info, 0, ++ sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); ++ } ++ ++ dwc_ep->cur_pkt = 0; ++ ep->iso_req_handle = req_handle; ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ dwc_otg_iso_ep_start_transfer(core_if, dwc_ep); ++ return 0; ++} ++ ++int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle) ++{ ++ dwc_irqflags_t flags = 0; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep || !ep->desc || ep->dwc_ep.num == 0) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ dwc_ep = &ep->dwc_ep; ++ ++ dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep); ++ ++ DWC_FREE(dwc_ep->pkt_info); ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ if (ep->iso_req_handle != req_handle) { ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ ep->iso_req_handle = 0; ++ return 0; ++} ++ ++/** ++ * This function is used for perodical data exchnage between PCD and gadget drivers. ++ * for Isochronous EPs ++ * ++ * - Every time a sync period completes this function is called to ++ * perform data exchange between PCD and gadget ++ */ ++void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep, ++ void *req_handle) ++{ ++ int i; ++ dwc_ep_t *dwc_ep; ++ ++ dwc_ep = &ep->dwc_ep; ++ ++ DWC_SPINUNLOCK(ep->pcd->lock); ++ pcd->fops->isoc_complete(pcd, ep->priv, ep->iso_req_handle, ++ dwc_ep->proc_buf_num ^ 0x1); ++ DWC_SPINLOCK(ep->pcd->lock); ++ ++ for (i = 0; i < dwc_ep->pkt_cnt; ++i) { ++ dwc_ep->pkt_info[i].status = 0; ++ dwc_ep->pkt_info[i].offset = 0; ++ dwc_ep->pkt_info[i].length = 0; ++ } ++} ++ ++int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *iso_req_handle) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep->desc || ep->dwc_ep.num == 0) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ dwc_ep = &ep->dwc_ep; ++ ++ return dwc_ep->pkt_cnt; ++} ++ ++void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *iso_req_handle, int packet, ++ int *status, int *actual, int *offset) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep) ++ DWC_WARN("bad ep\n"); ++ ++ dwc_ep = &ep->dwc_ep; ++ ++ *status = dwc_ep->pkt_info[packet].status; ++ *actual = dwc_ep->pkt_info[packet].length; ++ *offset = dwc_ep->pkt_info[packet].offset; ++} ++ ++#endif /* DWC_EN_ISOC */ ++ ++static void dwc_otg_pcd_init_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * pcd_ep, ++ uint32_t is_in, uint32_t ep_num) ++{ ++ /* Init EP structure */ ++ pcd_ep->desc = 0; ++ pcd_ep->pcd = pcd; ++ pcd_ep->stopped = 1; ++ pcd_ep->queue_sof = 0; ++ ++ /* Init DWC ep structure */ ++ pcd_ep->dwc_ep.is_in = is_in; ++ pcd_ep->dwc_ep.num = ep_num; ++ pcd_ep->dwc_ep.active = 0; ++ pcd_ep->dwc_ep.tx_fifo_num = 0; ++ /* Control until ep is actvated */ ++ pcd_ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; ++ pcd_ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; ++ pcd_ep->dwc_ep.dma_addr = 0; ++ pcd_ep->dwc_ep.start_xfer_buff = 0; ++ pcd_ep->dwc_ep.xfer_buff = 0; ++ pcd_ep->dwc_ep.xfer_len = 0; ++ pcd_ep->dwc_ep.xfer_count = 0; ++ pcd_ep->dwc_ep.sent_zlp = 0; ++ pcd_ep->dwc_ep.total_len = 0; ++ pcd_ep->dwc_ep.desc_addr = 0; ++ pcd_ep->dwc_ep.dma_desc_addr = 0; ++ DWC_CIRCLEQ_INIT(&pcd_ep->queue); ++} ++ ++/** ++ * Initialize ep's ++ */ ++static void dwc_otg_pcd_reinit(dwc_otg_pcd_t * pcd) ++{ ++ int i; ++ uint32_t hwcfg1; ++ dwc_otg_pcd_ep_t *ep; ++ int in_ep_cntr, out_ep_cntr; ++ uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps; ++ uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps; ++ ++ /** ++ * Initialize the EP0 structure. ++ */ ++ ep = &pcd->ep0; ++ dwc_otg_pcd_init_ep(pcd, ep, 0, 0); ++ ++ in_ep_cntr = 0; ++ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3; ++ for (i = 1; in_ep_cntr < num_in_eps; i++) { ++ if ((hwcfg1 & 0x1) == 0) { ++ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr]; ++ in_ep_cntr++; ++ /** ++ * @todo NGS: Add direction to EP, based on contents ++ * of HWCFG1. Need a copy of HWCFG1 in pcd structure? ++ * sprintf(";r ++ */ ++ dwc_otg_pcd_init_ep(pcd, ep, 1 /* IN */ , i); ++ ++ DWC_CIRCLEQ_INIT(&ep->queue); ++ } ++ hwcfg1 >>= 2; ++ } ++ ++ out_ep_cntr = 0; ++ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2; ++ for (i = 1; out_ep_cntr < num_out_eps; i++) { ++ if ((hwcfg1 & 0x1) == 0) { ++ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr]; ++ out_ep_cntr++; ++ /** ++ * @todo NGS: Add direction to EP, based on contents ++ * of HWCFG1. Need a copy of HWCFG1 in pcd structure? ++ * sprintf(";r ++ */ ++ dwc_otg_pcd_init_ep(pcd, ep, 0 /* OUT */ , i); ++ DWC_CIRCLEQ_INIT(&ep->queue); ++ } ++ hwcfg1 >>= 2; ++ } ++ ++ pcd->ep0state = EP0_DISCONNECT; ++ pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE; ++ pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; ++} ++ ++/** ++ * This function is called when the SRP timer expires. The SRP should ++ * complete within 6 seconds. ++ */ ++static void srp_timeout(void *ptr) ++{ ++ gotgctl_data_t gotgctl; ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; ++ volatile uint32_t *addr = &core_if->core_global_regs->gotgctl; ++ ++ gotgctl.d32 = DWC_READ_REG32(addr); ++ ++ core_if->srp_timer_started = 0; ++ ++ if (core_if->adp_enable) { ++ if (gotgctl.b.bsesvld == 0) { ++ gpwrdn_data_t gpwrdn = {.d32 = 0 }; ++ DWC_PRINTF("SRP Timeout BSESSVLD = 0\n"); ++ /* Power off the core */ ++ if (core_if->power_down == 2) { ++ gpwrdn.b.pwrdnswtch = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gpwrdn, ++ gpwrdn.d32, 0); ++ } ++ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuintsel = 1; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, ++ gpwrdn.d32); ++ dwc_otg_adp_probe_start(core_if); ++ } else { ++ DWC_PRINTF("SRP Timeout BSESSVLD = 1\n"); ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ } ++ } ++ ++ if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) && ++ (core_if->core_params->i2c_enable)) { ++ DWC_PRINTF("SRP Timeout\n"); ++ ++ if ((core_if->srp_success) && (gotgctl.b.bsesvld)) { ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); ++ } ++ ++ /* Clear Session Request */ ++ gotgctl.d32 = 0; ++ gotgctl.b.sesreq = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl, ++ gotgctl.d32, 0); ++ ++ core_if->srp_success = 0; ++ } else { ++ __DWC_ERROR("Device not connected/responding\n"); ++ gotgctl.b.sesreq = 0; ++ DWC_WRITE_REG32(addr, gotgctl.d32); ++ } ++ } else if (gotgctl.b.sesreq) { ++ DWC_PRINTF("SRP Timeout\n"); ++ ++ __DWC_ERROR("Device not connected/responding\n"); ++ gotgctl.b.sesreq = 0; ++ DWC_WRITE_REG32(addr, gotgctl.d32); ++ } else { ++ DWC_PRINTF(" SRP GOTGCTL=%0x\n", gotgctl.d32); ++ } ++} ++ ++/** ++ * Tasklet ++ * ++ */ ++extern void start_next_request(dwc_otg_pcd_ep_t * ep); ++ ++static void start_xfer_tasklet_func(void *data) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ int i; ++ depctl_data_t diepctl; ++ ++ DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n"); ++ ++ diepctl.d32 = DWC_READ_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl); ++ ++ if (pcd->ep0.queue_sof) { ++ pcd->ep0.queue_sof = 0; ++ start_next_request(&pcd->ep0); ++ // break; ++ } ++ ++ for (i = 0; i < core_if->dev_if->num_in_eps; i++) { ++ depctl_data_t diepctl; ++ diepctl.d32 = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl); ++ ++ if (pcd->in_ep[i].queue_sof) { ++ pcd->in_ep[i].queue_sof = 0; ++ start_next_request(&pcd->in_ep[i]); ++ // break; ++ } ++ } ++ ++ return; ++} ++ ++/** ++ * This function initialized the PCD portion of the driver. ++ * ++ */ ++dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_device_t *otg_dev) ++{ ++ struct device *dev = &otg_dev->os_dep.platformdev->dev; ++ dwc_otg_core_if_t *core_if = otg_dev->core_if; ++ dwc_otg_pcd_t *pcd = NULL; ++ dwc_otg_dev_if_t *dev_if; ++ int i; ++ ++ /* ++ * Allocate PCD structure ++ */ ++ pcd = DWC_ALLOC(sizeof(dwc_otg_pcd_t)); ++ ++ if (pcd == NULL) { ++ return NULL; ++ } ++ ++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK)) ++ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(pcd->lock); ++#else ++ pcd->lock = DWC_SPINLOCK_ALLOC(); ++#endif ++ DWC_DEBUGPL(DBG_HCDV, "Init of PCD %p given core_if %p\n", ++ pcd, core_if);//GRAYG ++ if (!pcd->lock) { ++ DWC_ERROR("Could not allocate lock for pcd"); ++ DWC_FREE(pcd); ++ return NULL; ++ } ++ /* Set core_if's lock pointer to hcd->lock */ ++ core_if->lock = pcd->lock; ++ pcd->core_if = core_if; ++ ++ dev_if = core_if->dev_if; ++ dev_if->isoc_ep = NULL; ++ ++ if (core_if->hwcfg4.b.ded_fifo_en) { ++ DWC_PRINTF("Dedicated Tx FIFOs mode\n"); ++ } else { ++ DWC_PRINTF("Shared Tx FIFO mode\n"); ++ } ++ ++ /* ++ * Initialized the Core for Device mode here if there is nod ADP support. ++ * Otherwise it will be done later in dwc_otg_adp_start routine. ++ */ ++ if (dwc_otg_is_device_mode(core_if) /*&& !core_if->adp_enable*/) { ++ dwc_otg_core_dev_init(core_if); ++ } ++ ++ /* ++ * Register the PCD Callbacks. ++ */ ++ dwc_otg_cil_register_pcd_callbacks(core_if, &pcd_callbacks, pcd); ++ ++ /* ++ * Initialize the DMA buffer for SETUP packets ++ */ ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ pcd->setup_pkt = ++ DWC_DMA_ALLOC(dev, sizeof(*pcd->setup_pkt) * 5, ++ &pcd->setup_pkt_dma_handle); ++ if (pcd->setup_pkt == NULL) { ++ DWC_FREE(pcd); ++ return NULL; ++ } ++ ++ pcd->status_buf = ++ DWC_DMA_ALLOC(dev, sizeof(uint16_t), ++ &pcd->status_buf_dma_handle); ++ if (pcd->status_buf == NULL) { ++ DWC_DMA_FREE(dev, sizeof(*pcd->setup_pkt) * 5, ++ pcd->setup_pkt, pcd->setup_pkt_dma_handle); ++ DWC_FREE(pcd); ++ return NULL; ++ } ++ ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ dev_if->setup_desc_addr[0] = ++ dwc_otg_ep_alloc_desc_chain(dev, ++ &dev_if->dma_setup_desc_addr[0], 1); ++ dev_if->setup_desc_addr[1] = ++ dwc_otg_ep_alloc_desc_chain(dev, ++ &dev_if->dma_setup_desc_addr[1], 1); ++ dev_if->in_desc_addr = ++ dwc_otg_ep_alloc_desc_chain(dev, ++ &dev_if->dma_in_desc_addr, 1); ++ dev_if->out_desc_addr = ++ dwc_otg_ep_alloc_desc_chain(dev, ++ &dev_if->dma_out_desc_addr, 1); ++ pcd->data_terminated = 0; ++ ++ if (dev_if->setup_desc_addr[0] == 0 ++ || dev_if->setup_desc_addr[1] == 0 ++ || dev_if->in_desc_addr == 0 ++ || dev_if->out_desc_addr == 0) { ++ ++ if (dev_if->out_desc_addr) ++ dwc_otg_ep_free_desc_chain(dev, ++ dev_if->out_desc_addr, ++ dev_if->dma_out_desc_addr, 1); ++ if (dev_if->in_desc_addr) ++ dwc_otg_ep_free_desc_chain(dev, ++ dev_if->in_desc_addr, ++ dev_if->dma_in_desc_addr, 1); ++ if (dev_if->setup_desc_addr[1]) ++ dwc_otg_ep_free_desc_chain(dev, ++ dev_if->setup_desc_addr[1], ++ dev_if->dma_setup_desc_addr[1], 1); ++ if (dev_if->setup_desc_addr[0]) ++ dwc_otg_ep_free_desc_chain(dev, ++ dev_if->setup_desc_addr[0], ++ dev_if->dma_setup_desc_addr[0], 1); ++ ++ DWC_DMA_FREE(dev, sizeof(*pcd->setup_pkt) * 5, ++ pcd->setup_pkt, ++ pcd->setup_pkt_dma_handle); ++ DWC_DMA_FREE(dev, sizeof(*pcd->status_buf), ++ pcd->status_buf, ++ pcd->status_buf_dma_handle); ++ ++ DWC_FREE(pcd); ++ ++ return NULL; ++ } ++ } ++ } else { ++ pcd->setup_pkt = DWC_ALLOC(sizeof(*pcd->setup_pkt) * 5); ++ if (pcd->setup_pkt == NULL) { ++ DWC_FREE(pcd); ++ return NULL; ++ } ++ ++ pcd->status_buf = DWC_ALLOC(sizeof(uint16_t)); ++ if (pcd->status_buf == NULL) { ++ DWC_FREE(pcd->setup_pkt); ++ DWC_FREE(pcd); ++ return NULL; ++ } ++ } ++ ++ dwc_otg_pcd_reinit(pcd); ++ ++ /* Allocate the cfi object for the PCD */ ++#ifdef DWC_UTE_CFI ++ pcd->cfi = DWC_ALLOC(sizeof(cfiobject_t)); ++ if (NULL == pcd->cfi) ++ goto fail; ++ if (init_cfi(pcd->cfi)) { ++ CFI_INFO("%s: Failed to init the CFI object\n", __func__); ++ goto fail; ++ } ++#endif ++ ++ /* Initialize tasklets */ ++ pcd->start_xfer_tasklet = DWC_TASK_ALLOC("xfer_tasklet", ++ start_xfer_tasklet_func, pcd); ++ pcd->test_mode_tasklet = DWC_TASK_ALLOC("test_mode_tasklet", ++ do_test_mode, pcd); ++ ++ /* Initialize SRP timer */ ++ core_if->srp_timer = DWC_TIMER_ALLOC("SRP TIMER", srp_timeout, core_if); ++ ++ if (core_if->core_params->dev_out_nak) { ++ /** ++ * Initialize xfer timeout timer. Implemented for ++ * 2.93a feature "Device DDMA OUT NAK Enhancement" ++ */ ++ for(i = 0; i < MAX_EPS_CHANNELS; i++) { ++ pcd->core_if->ep_xfer_timer[i] = ++ DWC_TIMER_ALLOC("ep timer", ep_xfer_timeout, ++ &pcd->core_if->ep_xfer_info[i]); ++ } ++ } ++ ++ return pcd; ++#ifdef DWC_UTE_CFI ++fail: ++#endif ++ if (pcd->setup_pkt) ++ DWC_FREE(pcd->setup_pkt); ++ if (pcd->status_buf) ++ DWC_FREE(pcd->status_buf); ++#ifdef DWC_UTE_CFI ++ if (pcd->cfi) ++ DWC_FREE(pcd->cfi); ++#endif ++ if (pcd) ++ DWC_FREE(pcd); ++ return NULL; ++ ++} ++ ++/** ++ * Remove PCD specific data ++ */ ++void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; ++ struct device *dev = dwc_otg_pcd_to_dev(pcd); ++ int i; ++ ++ if (pcd->core_if->core_params->dev_out_nak) { ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[i]); ++ pcd->core_if->ep_xfer_info[i].state = 0; ++ } ++ } ++ ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ DWC_DMA_FREE(dev, sizeof(*pcd->setup_pkt) * 5, pcd->setup_pkt, ++ pcd->setup_pkt_dma_handle); ++ DWC_DMA_FREE(dev, sizeof(uint16_t), pcd->status_buf, ++ pcd->status_buf_dma_handle); ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ dwc_otg_ep_free_desc_chain(dev, ++ dev_if->setup_desc_addr[0], ++ dev_if->dma_setup_desc_addr ++ [0], 1); ++ dwc_otg_ep_free_desc_chain(dev, ++ dev_if->setup_desc_addr[1], ++ dev_if->dma_setup_desc_addr ++ [1], 1); ++ dwc_otg_ep_free_desc_chain(dev, ++ dev_if->in_desc_addr, ++ dev_if->dma_in_desc_addr, 1); ++ dwc_otg_ep_free_desc_chain(dev, ++ dev_if->out_desc_addr, ++ dev_if->dma_out_desc_addr, ++ 1); ++ } ++ } else { ++ DWC_FREE(pcd->setup_pkt); ++ DWC_FREE(pcd->status_buf); ++ } ++ DWC_SPINLOCK_FREE(pcd->lock); ++ /* Set core_if's lock pointer to NULL */ ++ pcd->core_if->lock = NULL; ++ ++ DWC_TASK_FREE(pcd->start_xfer_tasklet); ++ DWC_TASK_FREE(pcd->test_mode_tasklet); ++ if (pcd->core_if->core_params->dev_out_nak) { ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ if (pcd->core_if->ep_xfer_timer[i]) { ++ DWC_TIMER_FREE(pcd->core_if->ep_xfer_timer[i]); ++ } ++ } ++ } ++ ++/* Release the CFI object's dynamic memory */ ++#ifdef DWC_UTE_CFI ++ if (pcd->cfi->ops.release) { ++ pcd->cfi->ops.release(pcd->cfi); ++ } ++#endif ++ ++ DWC_FREE(pcd); ++} ++ ++/** ++ * Returns whether registered pcd is dual speed or not ++ */ ++uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) || ++ ((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls))) { ++ return 0; ++ } ++ ++ return 1; ++} ++ ++/** ++ * Returns whether registered pcd is OTG capable or not ++ */ ++uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ gusbcfg_data_t usbcfg = {.d32 = 0 }; ++ ++ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); ++ if (!usbcfg.b.srpcap || !usbcfg.b.hnpcap) { ++ return 0; ++ } ++ ++ return 1; ++} ++ ++/** ++ * This function assigns periodic Tx FIFO to an periodic EP ++ * in shared Tx FIFO mode ++ */ ++static uint32_t assign_tx_fifo(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t TxMsk = 1; ++ int i; ++ ++ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i) { ++ if ((TxMsk & core_if->tx_msk) == 0) { ++ core_if->tx_msk |= TxMsk; ++ return i + 1; ++ } ++ TxMsk <<= 1; ++ } ++ return 0; ++} ++ ++/** ++ * This function assigns periodic Tx FIFO to an periodic EP ++ * in shared Tx FIFO mode ++ */ ++static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t * core_if) ++{ ++ uint32_t PerTxMsk = 1; ++ int i; ++ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i) { ++ if ((PerTxMsk & core_if->p_tx_msk) == 0) { ++ core_if->p_tx_msk |= PerTxMsk; ++ return i + 1; ++ } ++ PerTxMsk <<= 1; ++ } ++ return 0; ++} ++ ++/** ++ * This function releases periodic Tx FIFO ++ * in shared Tx FIFO mode ++ */ ++static void release_perio_tx_fifo(dwc_otg_core_if_t * core_if, ++ uint32_t fifo_num) ++{ ++ core_if->p_tx_msk = ++ (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk; ++} ++ ++/** ++ * This function releases periodic Tx FIFO ++ * in shared Tx FIFO mode ++ */ ++static void release_tx_fifo(dwc_otg_core_if_t * core_if, uint32_t fifo_num) ++{ ++ core_if->tx_msk = ++ (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk; ++} ++ ++/** ++ * This function is being called from gadget ++ * to enable PCD endpoint. ++ */ ++int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd, ++ const uint8_t * ep_desc, void *usb_ep) ++{ ++ int num, dir; ++ dwc_otg_pcd_ep_t *ep = NULL; ++ const usb_endpoint_descriptor_t *desc; ++ dwc_irqflags_t flags; ++ fifosize_data_t dptxfsiz = {.d32 = 0 }; ++ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; ++ gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 }; ++ int retval = 0; ++ int i, epcount; ++ struct device *dev = dwc_otg_pcd_to_dev(pcd); ++ ++ desc = (const usb_endpoint_descriptor_t *)ep_desc; ++ ++ if (!desc) { ++ pcd->ep0.priv = usb_ep; ++ ep = &pcd->ep0; ++ retval = -DWC_E_INVALID; ++ goto out; ++ } ++ ++ num = UE_GET_ADDR(desc->bEndpointAddress); ++ dir = UE_GET_DIR(desc->bEndpointAddress); ++ ++ if (!desc->wMaxPacketSize) { ++ DWC_WARN("bad maxpacketsize\n"); ++ retval = -DWC_E_INVALID; ++ goto out; ++ } ++ ++ if (dir == UE_DIR_IN) { ++ epcount = pcd->core_if->dev_if->num_in_eps; ++ for (i = 0; i < epcount; i++) { ++ if (num == pcd->in_ep[i].dwc_ep.num) { ++ ep = &pcd->in_ep[i]; ++ break; ++ } ++ } ++ } else { ++ epcount = pcd->core_if->dev_if->num_out_eps; ++ for (i = 0; i < epcount; i++) { ++ if (num == pcd->out_ep[i].dwc_ep.num) { ++ ep = &pcd->out_ep[i]; ++ break; ++ } ++ } ++ } ++ ++ if (!ep) { ++ DWC_WARN("bad address\n"); ++ retval = -DWC_E_INVALID; ++ goto out; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ ep->desc = desc; ++ ep->priv = usb_ep; ++ ++ /* ++ * Activate the EP ++ */ ++ ep->stopped = 0; ++ ++ ep->dwc_ep.is_in = (dir == UE_DIR_IN); ++ ep->dwc_ep.maxpacket = UGETW(desc->wMaxPacketSize); ++ ++ ep->dwc_ep.type = desc->bmAttributes & UE_XFERTYPE; ++ ++ if (ep->dwc_ep.is_in) { ++ if (!GET_CORE_IF(pcd)->en_multiple_tx_fifo) { ++ ep->dwc_ep.tx_fifo_num = 0; ++ ++ if (ep->dwc_ep.type == UE_ISOCHRONOUS) { ++ /* ++ * if ISOC EP then assign a Periodic Tx FIFO. ++ */ ++ ep->dwc_ep.tx_fifo_num = ++ assign_perio_tx_fifo(GET_CORE_IF(pcd)); ++ } ++ } else { ++ /* ++ * if Dedicated FIFOs mode is on then assign a Tx FIFO. ++ */ ++ ep->dwc_ep.tx_fifo_num = ++ assign_tx_fifo(GET_CORE_IF(pcd)); ++ } ++ ++ /* Calculating EP info controller base address */ ++ if (ep->dwc_ep.tx_fifo_num ++ && GET_CORE_IF(pcd)->en_multiple_tx_fifo) { ++ gdfifocfg.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)-> ++ core_global_regs->gdfifocfg); ++ gdfifocfgbase.d32 = gdfifocfg.d32 >> 16; ++ dptxfsiz.d32 = ++ (DWC_READ_REG32 ++ (&GET_CORE_IF(pcd)->core_global_regs-> ++ dtxfsiz[ep->dwc_ep.tx_fifo_num - 1]) >> 16); ++ gdfifocfg.b.epinfobase = ++ gdfifocfgbase.d32 + dptxfsiz.d32; ++ if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) { ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)-> ++ core_global_regs->gdfifocfg, ++ gdfifocfg.d32); ++ } ++ } ++ } ++ /* Set initial data PID. */ ++ if (ep->dwc_ep.type == UE_BULK) { ++ ep->dwc_ep.data_pid_start = 0; ++ } ++ ++ /* Alloc DMA Descriptors */ ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++#ifndef DWC_UTE_PER_IO ++ if (ep->dwc_ep.type != UE_ISOCHRONOUS) { ++#endif ++ ep->dwc_ep.desc_addr = ++ dwc_otg_ep_alloc_desc_chain(dev, ++ &ep->dwc_ep.dma_desc_addr, ++ MAX_DMA_DESC_CNT); ++ if (!ep->dwc_ep.desc_addr) { ++ DWC_WARN("%s, can't allocate DMA descriptor\n", ++ __func__); ++ retval = -DWC_E_SHUTDOWN; ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ goto out; ++ } ++#ifndef DWC_UTE_PER_IO ++ } ++#endif ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "Activate %s: type=%d, mps=%d desc=%p\n", ++ (ep->dwc_ep.is_in ? "IN" : "OUT"), ++ ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc); ++#ifdef DWC_UTE_PER_IO ++ ep->dwc_ep.xiso_bInterval = 1 << (ep->desc->bInterval - 1); ++#endif ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ ep->dwc_ep.bInterval = 1 << (ep->desc->bInterval - 1); ++ ep->dwc_ep.frame_num = 0xFFFFFFFF; ++ } ++ ++ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); ++ ++#ifdef DWC_UTE_CFI ++ if (pcd->cfi->ops.ep_enable) { ++ pcd->cfi->ops.ep_enable(pcd->cfi, pcd, ep); ++ } ++#endif ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++out: ++ return retval; ++} ++ ++/** ++ * This function is being called from gadget ++ * to disable PCD endpoint. ++ */ ++int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_irqflags_t flags; ++ dwc_otg_dev_dma_desc_t *desc_addr; ++ dwc_dma_t dma_desc_addr; ++ gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 }; ++ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; ++ fifosize_data_t dptxfsiz = {.d32 = 0 }; ++ struct device *dev = dwc_otg_pcd_to_dev(pcd); ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ ++ if (!ep || !ep->desc) { ++ DWC_DEBUGPL(DBG_PCD, "bad ep address\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ dwc_otg_request_nuke(ep); ++ ++ dwc_otg_ep_deactivate(GET_CORE_IF(pcd), &ep->dwc_ep); ++ if (pcd->core_if->core_params->dev_out_nak) { ++ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[ep->dwc_ep.num]); ++ pcd->core_if->ep_xfer_info[ep->dwc_ep.num].state = 0; ++ } ++ ep->desc = NULL; ++ ep->stopped = 1; ++ ++ gdfifocfg.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg); ++ gdfifocfgbase.d32 = gdfifocfg.d32 >> 16; ++ ++ if (ep->dwc_ep.is_in) { ++ if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) { ++ /* Flush the Tx FIFO */ ++ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), ++ ep->dwc_ep.tx_fifo_num); ++ } ++ release_perio_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num); ++ release_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num); ++ if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) { ++ /* Decreasing EPinfo Base Addr */ ++ dptxfsiz.d32 = ++ (DWC_READ_REG32 ++ (&GET_CORE_IF(pcd)-> ++ core_global_regs->dtxfsiz[ep->dwc_ep.tx_fifo_num-1]) >> 16); ++ gdfifocfg.b.epinfobase = gdfifocfgbase.d32 - dptxfsiz.d32; ++ if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) { ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg, ++ gdfifocfg.d32); ++ } ++ } ++ } ++ ++ /* Free DMA Descriptors */ ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ if (ep->dwc_ep.type != UE_ISOCHRONOUS) { ++ desc_addr = ep->dwc_ep.desc_addr; ++ dma_desc_addr = ep->dwc_ep.dma_desc_addr; ++ ++ /* Cannot call dma_free_coherent() with IRQs disabled */ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ dwc_otg_ep_free_desc_chain(dev, desc_addr, dma_desc_addr, ++ MAX_DMA_DESC_CNT); ++ ++ goto out_unlocked; ++ } ++ } ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++out_unlocked: ++ DWC_DEBUGPL(DBG_PCD, "%d %s disabled\n", ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT"); ++ return 0; ++ ++} ++ ++/******************************************************************************/ ++#ifdef DWC_UTE_PER_IO ++ ++/** ++ * Free the request and its extended parts ++ * ++ */ ++void dwc_pcd_xiso_ereq_free(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req) ++{ ++ DWC_FREE(req->ext_req.per_io_frame_descs); ++ DWC_FREE(req); ++} ++ ++/** ++ * Start the next request in the endpoint's queue. ++ * ++ */ ++int dwc_otg_pcd_xiso_start_next_request(dwc_otg_pcd_t * pcd, ++ dwc_otg_pcd_ep_t * ep) ++{ ++ int i; ++ dwc_otg_pcd_request_t *req = NULL; ++ dwc_ep_t *dwcep = NULL; ++ struct dwc_iso_xreq_port *ereq = NULL; ++ struct dwc_iso_pkt_desc_port *ddesc_iso; ++ uint16_t nat; ++ depctl_data_t diepctl; ++ ++ dwcep = &ep->dwc_ep; ++ ++ if (dwcep->xiso_active_xfers > 0) { ++#if 0 //Disable this to decrease s/w overhead that is crucial for Isoc transfers ++ DWC_WARN("There are currently active transfers for EP%d \ ++ (active=%d; queued=%d)", dwcep->num, dwcep->xiso_active_xfers, ++ dwcep->xiso_queued_xfers); ++#endif ++ return 0; ++ } ++ ++ nat = UGETW(ep->desc->wMaxPacketSize); ++ nat = (nat >> 11) & 0x03; ++ ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ ereq = &req->ext_req; ++ ep->stopped = 0; ++ ++ /* Get the frame number */ ++ dwcep->xiso_frame_num = ++ dwc_otg_get_frame_number(GET_CORE_IF(pcd)); ++ DWC_DEBUG("FRM_NUM=%d", dwcep->xiso_frame_num); ++ ++ ddesc_iso = ereq->per_io_frame_descs; ++ ++ if (dwcep->is_in) { ++ /* Setup DMA Descriptor chain for IN Isoc request */ ++ for (i = 0; i < ereq->pio_pkt_count; i++) { ++ //if ((i % (nat + 1)) == 0) ++ if ( i > 0 ) ++ dwcep->xiso_frame_num = ++ (dwcep->xiso_bInterval + ++ dwcep->xiso_frame_num) & 0x3FFF; ++ dwcep->desc_addr[i].buf = ++ req->dma + ddesc_iso[i].offset; ++ dwcep->desc_addr[i].status.b_iso_in.txbytes = ++ ddesc_iso[i].length; ++ dwcep->desc_addr[i].status.b_iso_in.framenum = ++ dwcep->xiso_frame_num; ++ dwcep->desc_addr[i].status.b_iso_in.bs = ++ BS_HOST_READY; ++ dwcep->desc_addr[i].status.b_iso_in.txsts = 0; ++ dwcep->desc_addr[i].status.b_iso_in.sp = ++ (ddesc_iso[i].length % ++ dwcep->maxpacket) ? 1 : 0; ++ dwcep->desc_addr[i].status.b_iso_in.ioc = 0; ++ dwcep->desc_addr[i].status.b_iso_in.pid = nat + 1; ++ dwcep->desc_addr[i].status.b_iso_in.l = 0; ++ ++ /* Process the last descriptor */ ++ if (i == ereq->pio_pkt_count - 1) { ++ dwcep->desc_addr[i].status.b_iso_in.ioc = 1; ++ dwcep->desc_addr[i].status.b_iso_in.l = 1; ++ } ++ } ++ ++ /* Setup and start the transfer for this endpoint */ ++ dwcep->xiso_active_xfers++; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->dev_if-> ++ in_ep_regs[dwcep->num]->diepdma, ++ dwcep->dma_desc_addr); ++ diepctl.d32 = 0; ++ diepctl.b.epena = 1; ++ diepctl.b.cnak = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->dev_if-> ++ in_ep_regs[dwcep->num]->diepctl, 0, ++ diepctl.d32); ++ } else { ++ /* Setup DMA Descriptor chain for OUT Isoc request */ ++ for (i = 0; i < ereq->pio_pkt_count; i++) { ++ //if ((i % (nat + 1)) == 0) ++ dwcep->xiso_frame_num = (dwcep->xiso_bInterval + ++ dwcep->xiso_frame_num) & 0x3FFF; ++ dwcep->desc_addr[i].buf = ++ req->dma + ddesc_iso[i].offset; ++ dwcep->desc_addr[i].status.b_iso_out.rxbytes = ++ ddesc_iso[i].length; ++ dwcep->desc_addr[i].status.b_iso_out.framenum = ++ dwcep->xiso_frame_num; ++ dwcep->desc_addr[i].status.b_iso_out.bs = ++ BS_HOST_READY; ++ dwcep->desc_addr[i].status.b_iso_out.rxsts = 0; ++ dwcep->desc_addr[i].status.b_iso_out.sp = ++ (ddesc_iso[i].length % ++ dwcep->maxpacket) ? 1 : 0; ++ dwcep->desc_addr[i].status.b_iso_out.ioc = 0; ++ dwcep->desc_addr[i].status.b_iso_out.pid = nat + 1; ++ dwcep->desc_addr[i].status.b_iso_out.l = 0; ++ ++ /* Process the last descriptor */ ++ if (i == ereq->pio_pkt_count - 1) { ++ dwcep->desc_addr[i].status.b_iso_out.ioc = 1; ++ dwcep->desc_addr[i].status.b_iso_out.l = 1; ++ } ++ } ++ ++ /* Setup and start the transfer for this endpoint */ ++ dwcep->xiso_active_xfers++; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)-> ++ dev_if->out_ep_regs[dwcep->num]-> ++ doepdma, dwcep->dma_desc_addr); ++ diepctl.d32 = 0; ++ diepctl.b.epena = 1; ++ diepctl.b.cnak = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)-> ++ dev_if->out_ep_regs[dwcep->num]-> ++ doepctl, 0, diepctl.d32); ++ } ++ ++ } else { ++ ep->stopped = 1; ++ } ++ ++ return 0; ++} ++ ++/** ++ * - Remove the request from the queue ++ */ ++void complete_xiso_ep(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_pcd_request_t *req = NULL; ++ struct dwc_iso_xreq_port *ereq = NULL; ++ struct dwc_iso_pkt_desc_port *ddesc_iso = NULL; ++ dwc_ep_t *dwcep = NULL; ++ int i; ++ ++ //DWC_DEBUG(); ++ dwcep = &ep->dwc_ep; ++ ++ /* Get the first pending request from the queue */ ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ if (!req) { ++ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep); ++ return; ++ } ++ dwcep->xiso_active_xfers--; ++ dwcep->xiso_queued_xfers--; ++ /* Remove this request from the queue */ ++ DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry); ++ } else { ++ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep); ++ return; ++ } ++ ++ ep->stopped = 1; ++ ereq = &req->ext_req; ++ ddesc_iso = ereq->per_io_frame_descs; ++ ++ if (dwcep->xiso_active_xfers < 0) { ++ DWC_WARN("EP#%d (xiso_active_xfers=%d)", dwcep->num, ++ dwcep->xiso_active_xfers); ++ } ++ ++ /* Fill the Isoc descs of portable extended req from dma descriptors */ ++ for (i = 0; i < ereq->pio_pkt_count; i++) { ++ if (dwcep->is_in) { /* IN endpoints */ ++ ddesc_iso[i].actual_length = ddesc_iso[i].length - ++ dwcep->desc_addr[i].status.b_iso_in.txbytes; ++ ddesc_iso[i].status = ++ dwcep->desc_addr[i].status.b_iso_in.txsts; ++ } else { /* OUT endpoints */ ++ ddesc_iso[i].actual_length = ddesc_iso[i].length - ++ dwcep->desc_addr[i].status.b_iso_out.rxbytes; ++ ddesc_iso[i].status = ++ dwcep->desc_addr[i].status.b_iso_out.rxsts; ++ } ++ } ++ ++ DWC_SPINUNLOCK(ep->pcd->lock); ++ ++ /* Call the completion function in the non-portable logic */ ++ ep->pcd->fops->xisoc_complete(ep->pcd, ep->priv, req->priv, 0, ++ &req->ext_req); ++ ++ DWC_SPINLOCK(ep->pcd->lock); ++ ++ /* Free the request - specific freeing needed for extended request object */ ++ dwc_pcd_xiso_ereq_free(ep, req); ++ ++ /* Start the next request */ ++ dwc_otg_pcd_xiso_start_next_request(ep->pcd, ep); ++ ++ return; ++} ++ ++/** ++ * Create and initialize the Isoc pkt descriptors of the extended request. ++ * ++ */ ++static int dwc_otg_pcd_xiso_create_pkt_descs(dwc_otg_pcd_request_t * req, ++ void *ereq_nonport, ++ int atomic_alloc) ++{ ++ struct dwc_iso_xreq_port *ereq = NULL; ++ struct dwc_iso_xreq_port *req_mapped = NULL; ++ struct dwc_iso_pkt_desc_port *ipds = NULL; /* To be created in this function */ ++ uint32_t pkt_count; ++ int i; ++ ++ ereq = &req->ext_req; ++ req_mapped = (struct dwc_iso_xreq_port *)ereq_nonport; ++ pkt_count = req_mapped->pio_pkt_count; ++ ++ /* Create the isoc descs */ ++ if (atomic_alloc) { ++ ipds = DWC_ALLOC_ATOMIC(sizeof(*ipds) * pkt_count); ++ } else { ++ ipds = DWC_ALLOC(sizeof(*ipds) * pkt_count); ++ } ++ ++ if (!ipds) { ++ DWC_ERROR("Failed to allocate isoc descriptors"); ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Initialize the extended request fields */ ++ ereq->per_io_frame_descs = ipds; ++ ereq->error_count = 0; ++ ereq->pio_alloc_pkt_count = pkt_count; ++ ereq->pio_pkt_count = pkt_count; ++ ereq->tr_sub_flags = req_mapped->tr_sub_flags; ++ ++ /* Init the Isoc descriptors */ ++ for (i = 0; i < pkt_count; i++) { ++ ipds[i].length = req_mapped->per_io_frame_descs[i].length; ++ ipds[i].offset = req_mapped->per_io_frame_descs[i].offset; ++ ipds[i].status = req_mapped->per_io_frame_descs[i].status; /* 0 */ ++ ipds[i].actual_length = ++ req_mapped->per_io_frame_descs[i].actual_length; ++ } ++ ++ return 0; ++} ++ ++static void prn_ext_request(struct dwc_iso_xreq_port *ereq) ++{ ++ struct dwc_iso_pkt_desc_port *xfd = NULL; ++ int i; ++ ++ DWC_DEBUG("per_io_frame_descs=%p", ereq->per_io_frame_descs); ++ DWC_DEBUG("tr_sub_flags=%d", ereq->tr_sub_flags); ++ DWC_DEBUG("error_count=%d", ereq->error_count); ++ DWC_DEBUG("pio_alloc_pkt_count=%d", ereq->pio_alloc_pkt_count); ++ DWC_DEBUG("pio_pkt_count=%d", ereq->pio_pkt_count); ++ DWC_DEBUG("res=%d", ereq->res); ++ ++ for (i = 0; i < ereq->pio_pkt_count; i++) { ++ xfd = &ereq->per_io_frame_descs[0]; ++ DWC_DEBUG("FD #%d", i); ++ ++ DWC_DEBUG("xfd->actual_length=%d", xfd->actual_length); ++ DWC_DEBUG("xfd->length=%d", xfd->length); ++ DWC_DEBUG("xfd->offset=%d", xfd->offset); ++ DWC_DEBUG("xfd->status=%d", xfd->status); ++ } ++} ++ ++/** ++ * ++ */ ++int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen, ++ int zero, void *req_handle, int atomic_alloc, ++ void *ereq_nonport) ++{ ++ dwc_otg_pcd_request_t *req = NULL; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_irqflags_t flags; ++ int res; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ /* We support this extension only for DDMA mode */ ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) ++ if (!GET_CORE_IF(pcd)->dma_desc_enable) ++ return -DWC_E_INVALID; ++ ++ /* Create a dwc_otg_pcd_request_t object */ ++ if (atomic_alloc) { ++ req = DWC_ALLOC_ATOMIC(sizeof(*req)); ++ } else { ++ req = DWC_ALLOC(sizeof(*req)); ++ } ++ ++ if (!req) { ++ return -DWC_E_NO_MEMORY; ++ } ++ ++ /* Create the Isoc descs for this request which shall be the exact match ++ * of the structure sent to us from the non-portable logic */ ++ res = ++ dwc_otg_pcd_xiso_create_pkt_descs(req, ereq_nonport, atomic_alloc); ++ if (res) { ++ DWC_WARN("Failed to init the Isoc descriptors"); ++ DWC_FREE(req); ++ return res; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry); ++ req->buf = buf; ++ req->dma = dma_buf; ++ req->length = buflen; ++ req->sent_zlp = zero; ++ req->priv = req_handle; ++ ++ //DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ep->dwc_ep.dma_addr = dma_buf; ++ ep->dwc_ep.start_xfer_buff = buf; ++ ep->dwc_ep.xfer_buff = buf; ++ ep->dwc_ep.xfer_len = 0; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = buflen; ++ ++ /* Add this request to the tail */ ++ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry); ++ ep->dwc_ep.xiso_queued_xfers++; ++ ++//DWC_DEBUG("CP_0"); ++//DWC_DEBUG("req->ext_req.tr_sub_flags=%d", req->ext_req.tr_sub_flags); ++//prn_ext_request((struct dwc_iso_xreq_port *) ereq_nonport); ++//prn_ext_request(&req->ext_req); ++ ++ //DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ /* If the req->status == ASAP then check if there is any active transfer ++ * for this endpoint. If no active transfers, then get the first entry ++ * from the queue and start that transfer ++ */ ++ if (req->ext_req.tr_sub_flags == DWC_EREQ_TF_ASAP) { ++ res = dwc_otg_pcd_xiso_start_next_request(pcd, ep); ++ if (res) { ++ DWC_WARN("Failed to start the next Isoc transfer"); ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ DWC_FREE(req); ++ return res; ++ } ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return 0; ++} ++ ++#endif ++/* END ifdef DWC_UTE_PER_IO ***************************************************/ ++int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen, ++ int zero, void *req_handle, int atomic_alloc) ++{ ++ struct device *dev = dwc_otg_pcd_to_dev(pcd); ++ dwc_irqflags_t flags; ++ dwc_otg_pcd_request_t *req; ++ dwc_otg_pcd_ep_t *ep; ++ uint32_t max_transfer; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) { ++ DWC_WARN("bad ep\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ if (atomic_alloc) { ++ req = DWC_ALLOC_ATOMIC(sizeof(*req)); ++ } else { ++ req = DWC_ALLOC(sizeof(*req)); ++ } ++ ++ if (!req) { ++ return -DWC_E_NO_MEMORY; ++ } ++ DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry); ++ if (!GET_CORE_IF(pcd)->core_params->opt) { ++ if (ep->dwc_ep.num != 0) { ++ DWC_ERROR("queue req %p, len %d buf %p\n", ++ req_handle, buflen, buf); ++ } ++ } ++ ++ req->buf = buf; ++ req->dma = dma_buf; ++ req->length = buflen; ++ req->sent_zlp = zero; ++ req->priv = req_handle; ++ req->dw_align_buf = NULL; ++ if ((dma_buf & 0x3) && GET_CORE_IF(pcd)->dma_enable ++ && !GET_CORE_IF(pcd)->dma_desc_enable) ++ req->dw_align_buf = DWC_DMA_ALLOC(dev, buflen, ++ &req->dw_align_buf_dma); ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ /* ++ * After adding request to the queue for IN ISOC wait for In Token Received ++ * when TX FIFO is empty interrupt and for OUT ISOC wait for OUT Token ++ * Received when EP is disabled interrupt to obtain starting microframe ++ * (odd/even) start transfer ++ */ ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ if (req != 0) { ++ depctl_data_t depctl = {.d32 = ++ DWC_READ_REG32(&pcd->core_if->dev_if-> ++ in_ep_regs[ep->dwc_ep.num]-> ++ diepctl) }; ++ ++pcd->request_pending; ++ ++ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry); ++ if (ep->dwc_ep.is_in) { ++ depctl.b.cnak = 1; ++ DWC_WRITE_REG32(&pcd->core_if->dev_if-> ++ in_ep_regs[ep->dwc_ep.num]-> ++ diepctl, depctl.d32); ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ } ++ return 0; ++ } ++ ++ /* ++ * For EP0 IN without premature status, zlp is required? ++ */ ++ if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) { ++ DWC_DEBUGPL(DBG_PCDV, "%d-OUT ZLP\n", ep->dwc_ep.num); ++ //_req->zero = 1; ++ } ++ ++ /* Start the transfer */ ++ if (DWC_CIRCLEQ_EMPTY(&ep->queue) && !ep->stopped) { ++ /* EP0 Transfer? */ ++ if (ep->dwc_ep.num == 0) { ++ switch (pcd->ep0state) { ++ case EP0_IN_DATA_PHASE: ++ DWC_DEBUGPL(DBG_PCD, ++ "%s ep0: EP0_IN_DATA_PHASE\n", ++ __func__); ++ break; ++ ++ case EP0_OUT_DATA_PHASE: ++ DWC_DEBUGPL(DBG_PCD, ++ "%s ep0: EP0_OUT_DATA_PHASE\n", ++ __func__); ++ if (pcd->request_config) { ++ /* Complete STATUS PHASE */ ++ ep->dwc_ep.is_in = 1; ++ pcd->ep0state = EP0_IN_STATUS_PHASE; ++ } ++ break; ++ ++ case EP0_IN_STATUS_PHASE: ++ DWC_DEBUGPL(DBG_PCD, ++ "%s ep0: EP0_IN_STATUS_PHASE\n", ++ __func__); ++ break; ++ ++ default: ++ DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n", ++ pcd->ep0state); ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return -DWC_E_SHUTDOWN; ++ } ++ ++ ep->dwc_ep.dma_addr = dma_buf; ++ ep->dwc_ep.start_xfer_buff = buf; ++ ep->dwc_ep.xfer_buff = buf; ++ ep->dwc_ep.xfer_len = buflen; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ if (zero) { ++ if ((ep->dwc_ep.xfer_len % ++ ep->dwc_ep.maxpacket == 0) ++ && (ep->dwc_ep.xfer_len != 0)) { ++ ep->dwc_ep.sent_zlp = 1; ++ } ++ ++ } ++ ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), ++ &ep->dwc_ep); ++ } // non-ep0 endpoints ++ else { ++#ifdef DWC_UTE_CFI ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ /* store the request length */ ++ ep->dwc_ep.cfi_req_len = buflen; ++ pcd->cfi->ops.build_descriptors(pcd->cfi, pcd, ++ ep, req); ++ } else { ++#endif ++ max_transfer = ++ GET_CORE_IF(ep->pcd)->core_params-> ++ max_transfer_size; ++ ++ /* Setup and start the Transfer */ ++ if (req->dw_align_buf){ ++ if (ep->dwc_ep.is_in) ++ dwc_memcpy(req->dw_align_buf, ++ buf, buflen); ++ ep->dwc_ep.dma_addr = ++ req->dw_align_buf_dma; ++ ep->dwc_ep.start_xfer_buff = ++ req->dw_align_buf; ++ ep->dwc_ep.xfer_buff = ++ req->dw_align_buf; ++ } else { ++ ep->dwc_ep.dma_addr = dma_buf; ++ ep->dwc_ep.start_xfer_buff = buf; ++ ep->dwc_ep.xfer_buff = buf; ++ } ++ ep->dwc_ep.xfer_len = 0; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = buflen; ++ ++ ep->dwc_ep.maxxfer = max_transfer; ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ uint32_t out_max_xfer = ++ DDMA_MAX_TRANSFER_SIZE - ++ (DDMA_MAX_TRANSFER_SIZE % 4); ++ if (ep->dwc_ep.is_in) { ++ if (ep->dwc_ep.maxxfer > ++ DDMA_MAX_TRANSFER_SIZE) { ++ ep->dwc_ep.maxxfer = ++ DDMA_MAX_TRANSFER_SIZE; ++ } ++ } else { ++ if (ep->dwc_ep.maxxfer > ++ out_max_xfer) { ++ ep->dwc_ep.maxxfer = ++ out_max_xfer; ++ } ++ } ++ } ++ if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) { ++ ep->dwc_ep.maxxfer -= ++ (ep->dwc_ep.maxxfer % ++ ep->dwc_ep.maxpacket); ++ } ++ ++ if (zero) { ++ if ((ep->dwc_ep.total_len % ++ ep->dwc_ep.maxpacket == 0) ++ && (ep->dwc_ep.total_len != 0)) { ++ ep->dwc_ep.sent_zlp = 1; ++ } ++ } ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), ++ &ep->dwc_ep); ++ } ++ } ++ ++ if (req != 0) { ++ ++pcd->request_pending; ++ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry); ++ if (ep->dwc_ep.is_in && ep->stopped ++ && !(GET_CORE_IF(pcd)->dma_enable)) { ++ /** @todo NGS Create a function for this. */ ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ diepmsk.b.intktxfemp = 1; ++ if (GET_CORE_IF(pcd)->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)-> ++ dev_if->dev_global_regs->diepeachintmsk ++ [ep->dwc_ep.num], 0, ++ diepmsk.d32); ++ } else { ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)-> ++ dev_if->dev_global_regs-> ++ diepmsk, 0, diepmsk.d32); ++ } ++ ++ } ++ } ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ return 0; ++} ++ ++int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle) ++{ ++ dwc_irqflags_t flags; ++ dwc_otg_pcd_request_t *req; ++ dwc_otg_pcd_ep_t *ep; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) { ++ DWC_WARN("bad argument\n"); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ ++ /* make sure it's actually queued on this endpoint */ ++ DWC_CIRCLEQ_FOREACH(req, &ep->queue, queue_entry) { ++ if (req->priv == (void *)req_handle) { ++ break; ++ } ++ } ++ ++ if (req->priv != (void *)req_handle) { ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ return -DWC_E_INVALID; ++ } ++ ++ if (!DWC_CIRCLEQ_EMPTY_ENTRY(req, queue_entry)) { ++ dwc_otg_request_done(ep, req, -DWC_E_RESTART); ++ } else { ++ req = NULL; ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ return req ? 0 : -DWC_E_SHUTDOWN; ++ ++} ++ ++/** ++ * dwc_otg_pcd_ep_wedge - sets the halt feature and ignores clear requests ++ * ++ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT) ++ * requests. If the gadget driver clears the halt status, it will ++ * automatically unwedge the endpoint. ++ * ++ * Returns zero on success, else negative DWC error code. ++ */ ++int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_irqflags_t flags; ++ int retval = 0; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ ++ if ((!ep->desc && ep != &pcd->ep0) || ++ (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) { ++ DWC_WARN("%s, bad ep\n", __func__); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT"); ++ retval = -DWC_E_AGAIN; ++ } else { ++ /* This code needs to be reviewed */ ++ if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) { ++ dtxfsts_data_t txstatus; ++ fifosize_data_t txfifosize; ++ ++ txfifosize.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)-> ++ core_global_regs->dtxfsiz[ep->dwc_ep. ++ tx_fifo_num]); ++ txstatus.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)-> ++ dev_if->in_ep_regs[ep->dwc_ep.num]-> ++ dtxfsts); ++ ++ if (txstatus.b.txfspcavail < txfifosize.b.depth) { ++ DWC_WARN("%s() Data In Tx Fifo\n", __func__); ++ retval = -DWC_E_AGAIN; ++ } else { ++ if (ep->dwc_ep.num == 0) { ++ pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), ++ &ep->dwc_ep); ++ } ++ } else { ++ if (ep->dwc_ep.num == 0) { ++ pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep); ++ } ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ return retval; ++} ++ ++int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_irqflags_t flags; ++ int retval = 0; ++ ++ ep = get_ep_from_handle(pcd, ep_handle); ++ ++ if (!ep || (!ep->desc && ep != &pcd->ep0) || ++ (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) { ++ DWC_WARN("%s, bad ep\n", __func__); ++ return -DWC_E_INVALID; ++ } ++ ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT"); ++ retval = -DWC_E_AGAIN; ++ } else if (value == 0) { ++ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep); ++ } else if (value == 1) { ++ if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) { ++ dtxfsts_data_t txstatus; ++ fifosize_data_t txfifosize; ++ ++ txfifosize.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs-> ++ dtxfsiz[ep->dwc_ep.tx_fifo_num]); ++ txstatus.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if-> ++ in_ep_regs[ep->dwc_ep.num]->dtxfsts); ++ ++ if (txstatus.b.txfspcavail < txfifosize.b.depth) { ++ DWC_WARN("%s() Data In Tx Fifo\n", __func__); ++ retval = -DWC_E_AGAIN; ++ } else { ++ if (ep->dwc_ep.num == 0) { ++ pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), ++ &ep->dwc_ep); ++ } ++ } else { ++ if (ep->dwc_ep.num == 0) { ++ pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep); ++ } ++ } else if (value == 2) { ++ ep->dwc_ep.stall_clear_flag = 0; ++ } else if (value == 3) { ++ ep->dwc_ep.stall_clear_flag = 1; ++ } ++ ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ ++ return retval; ++} ++ ++/** ++ * This function initiates remote wakeup of the host from suspend state. ++ */ ++void dwc_otg_pcd_rem_wkup_from_suspend(dwc_otg_pcd_t * pcd, int set) ++{ ++ dctl_data_t dctl = { 0 }; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dsts_data_t dsts; ++ ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ if (!dsts.b.suspsts) { ++ DWC_WARN("Remote wakeup while is not in suspend state\n"); ++ } ++ /* Check if DEVICE_REMOTE_WAKEUP feature enabled */ ++ if (pcd->remote_wakeup_enable) { ++ if (set) { ++ ++ if (core_if->adp_enable) { ++ gpwrdn_data_t gpwrdn; ++ ++ dwc_otg_adp_probe_stop(core_if); ++ ++ /* Mask SRP detected interrupt from Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.srp_det_msk = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gpwrdn, ++ gpwrdn.d32, 0); ++ ++ /* Disable Power Down Logic */ ++ gpwrdn.d32 = 0; ++ gpwrdn.b.pmuactv = 1; ++ DWC_MODIFY_REG32(&core_if-> ++ core_global_regs->gpwrdn, ++ gpwrdn.d32, 0); ++ ++ /* ++ * Initialize the Core for Device mode. ++ */ ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ cil_pcd_start(core_if); ++ ++ dwc_otg_initiate_srp(core_if); ++ } ++ ++ dctl.b.rmtwkupsig = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ dctl, 0, dctl.d32); ++ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n"); ++ ++ dwc_mdelay(2); ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ dctl, dctl.d32, 0); ++ DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n"); ++ } ++ } else { ++ DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n"); ++ } ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++/** ++ * This function initiates remote wakeup of the host from L1 sleep state. ++ */ ++void dwc_otg_pcd_rem_wkup_from_sleep(dwc_otg_pcd_t * pcd, int set) ++{ ++ glpmcfg_data_t lpmcfg; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ ++ /* Check if we are in L1 state */ ++ if (!lpmcfg.b.prt_sleep_sts) { ++ DWC_DEBUGPL(DBG_PCD, "Device is not in sleep state\n"); ++ return; ++ } ++ ++ /* Check if host allows remote wakeup */ ++ if (!lpmcfg.b.rem_wkup_en) { ++ DWC_DEBUGPL(DBG_PCD, "Host does not allow remote wakeup\n"); ++ return; ++ } ++ ++ /* Check if Resume OK */ ++ if (!lpmcfg.b.sleep_state_resumeok) { ++ DWC_DEBUGPL(DBG_PCD, "Sleep state resume is not OK\n"); ++ return; ++ } ++ ++ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); ++ lpmcfg.b.en_utmi_sleep = 0; ++ lpmcfg.b.hird_thres &= (~(1 << 4)); ++ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); ++ ++ if (set) { ++ dctl_data_t dctl = {.d32 = 0 }; ++ dctl.b.rmtwkupsig = 1; ++ /* Set RmtWkUpSig bit to start remote wakup signaling. ++ * Hardware will automatically clear this bit. ++ */ ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, ++ 0, dctl.d32); ++ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n"); ++ } ++ ++} ++#endif ++ ++/** ++ * Performs remote wakeup. ++ */ ++void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_irqflags_t flags; ++ if (dwc_otg_is_device_mode(core_if)) { ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ if (core_if->lx_state == DWC_OTG_L1) { ++ dwc_otg_pcd_rem_wkup_from_sleep(pcd, set); ++ } else { ++#endif ++ dwc_otg_pcd_rem_wkup_from_suspend(pcd, set); ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ } ++#endif ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++ } ++ return; ++} ++ ++void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dctl_data_t dctl = { 0 }; ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ dctl.b.sftdiscon = 1; ++ DWC_PRINTF("Soft disconnect for %d useconds\n",no_of_usecs); ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ dwc_udelay(no_of_usecs); ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32,0); ++ ++ } else{ ++ DWC_PRINTF("NOT SUPPORTED IN HOST MODE\n"); ++ } ++ return; ++ ++} ++ ++int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd) ++{ ++ dsts_data_t dsts; ++ gotgctl_data_t gotgctl; ++ ++ /* ++ * This function starts the Protocol if no session is in progress. If ++ * a session is already in progress, but the device is suspended, ++ * remote wakeup signaling is started. ++ */ ++ ++ /* Check if valid session */ ++ gotgctl.d32 = ++ DWC_READ_REG32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl)); ++ if (gotgctl.b.bsesvld) { ++ /* Check if suspend state */ ++ dsts.d32 = ++ DWC_READ_REG32(& ++ (GET_CORE_IF(pcd)->dev_if-> ++ dev_global_regs->dsts)); ++ if (dsts.b.suspsts) { ++ dwc_otg_pcd_remote_wakeup(pcd, 1); ++ } ++ } else { ++ dwc_otg_pcd_initiate_srp(pcd); ++ } ++ ++ return 0; ++ ++} ++ ++/** ++ * Start the SRP timer to detect when the SRP does not complete within ++ * 6 seconds. ++ * ++ * @param pcd the pcd structure. ++ */ ++void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd) ++{ ++ dwc_irqflags_t flags; ++ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); ++ dwc_otg_initiate_srp(GET_CORE_IF(pcd)); ++ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); ++} ++ ++int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd) ++{ ++ return dwc_otg_get_frame_number(GET_CORE_IF(pcd)); ++} ++ ++int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd) ++{ ++ return GET_CORE_IF(pcd)->core_params->lpm_enable; ++} ++ ++uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd) ++{ ++ return pcd->b_hnp_enable; ++} ++ ++uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd) ++{ ++ return pcd->a_hnp_support; ++} ++ ++uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd) ++{ ++ return pcd->a_alt_hnp_support; ++} ++ ++int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd) ++{ ++ return pcd->remote_wakeup_enable; ++} ++ ++#endif /* DWC_HOST_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd.h +@@ -0,0 +1,273 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $ ++ * $Revision: #48 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++#if !defined(__DWC_PCD_H__) ++#define __DWC_PCD_H__ ++ ++#include "dwc_otg_os_dep.h" ++#include "usb.h" ++#include "dwc_otg_cil.h" ++#include "dwc_otg_pcd_if.h" ++#include "dwc_otg_driver.h" ++ ++struct cfiobject; ++ ++/** ++ * @file ++ * ++ * This file contains the structures, constants, and interfaces for ++ * the Perpherial Contoller Driver (PCD). ++ * ++ * The Peripheral Controller Driver (PCD) for Linux will implement the ++ * Gadget API, so that the existing Gadget drivers can be used. For ++ * the Mass Storage Function driver the File-backed USB Storage Gadget ++ * (FBS) driver will be used. The FBS driver supports the ++ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only ++ * transports. ++ * ++ */ ++ ++/** Invalid DMA Address */ ++#define DWC_DMA_ADDR_INVALID (~(dwc_dma_t)0) ++ ++/** Max Transfer size for any EP */ ++#define DDMA_MAX_TRANSFER_SIZE 65535 ++ ++/** ++ * Get the pointer to the core_if from the pcd pointer. ++ */ ++#define GET_CORE_IF( _pcd ) (_pcd->core_if) ++ ++/** ++ * States of EP0. ++ */ ++typedef enum ep0_state { ++ EP0_DISCONNECT, /* no host */ ++ EP0_IDLE, ++ EP0_IN_DATA_PHASE, ++ EP0_OUT_DATA_PHASE, ++ EP0_IN_STATUS_PHASE, ++ EP0_OUT_STATUS_PHASE, ++ EP0_STALL, ++} ep0state_e; ++ ++/** Fordward declaration.*/ ++struct dwc_otg_pcd; ++ ++/** DWC_otg iso request structure. ++ * ++ */ ++typedef struct usb_iso_request dwc_otg_pcd_iso_request_t; ++ ++#ifdef DWC_UTE_PER_IO ++ ++/** ++ * This shall be the exact analogy of the same type structure defined in the ++ * usb_gadget.h. Each descriptor contains ++ */ ++struct dwc_iso_pkt_desc_port { ++ uint32_t offset; ++ uint32_t length; /* expected length */ ++ uint32_t actual_length; ++ uint32_t status; ++}; ++ ++struct dwc_iso_xreq_port { ++ /** transfer/submission flag */ ++ uint32_t tr_sub_flags; ++ /** Start the request ASAP */ ++#define DWC_EREQ_TF_ASAP 0x00000002 ++ /** Just enqueue the request w/o initiating a transfer */ ++#define DWC_EREQ_TF_ENQUEUE 0x00000004 ++ ++ /** ++ * count of ISO packets attached to this request - shall ++ * not exceed the pio_alloc_pkt_count ++ */ ++ uint32_t pio_pkt_count; ++ /** count of ISO packets allocated for this request */ ++ uint32_t pio_alloc_pkt_count; ++ /** number of ISO packet errors */ ++ uint32_t error_count; ++ /** reserved for future extension */ ++ uint32_t res; ++ /** Will be allocated and freed in the UTE gadget and based on the CFC value */ ++ struct dwc_iso_pkt_desc_port *per_io_frame_descs; ++}; ++#endif ++/** DWC_otg request structure. ++ * This structure is a list of requests. ++ */ ++typedef struct dwc_otg_pcd_request { ++ void *priv; ++ void *buf; ++ dwc_dma_t dma; ++ uint32_t length; ++ uint32_t actual; ++ unsigned sent_zlp:1; ++ /** ++ * Used instead of original buffer if ++ * it(physical address) is not dword-aligned. ++ **/ ++ uint8_t *dw_align_buf; ++ dwc_dma_t dw_align_buf_dma; ++ ++ DWC_CIRCLEQ_ENTRY(dwc_otg_pcd_request) queue_entry; ++#ifdef DWC_UTE_PER_IO ++ struct dwc_iso_xreq_port ext_req; ++ //void *priv_ereq_nport; /* */ ++#endif ++} dwc_otg_pcd_request_t; ++ ++DWC_CIRCLEQ_HEAD(req_list, dwc_otg_pcd_request); ++ ++/** PCD EP structure. ++ * This structure describes an EP, there is an array of EPs in the PCD ++ * structure. ++ */ ++typedef struct dwc_otg_pcd_ep { ++ /** USB EP Descriptor */ ++ const usb_endpoint_descriptor_t *desc; ++ ++ /** queue of dwc_otg_pcd_requests. */ ++ struct req_list queue; ++ unsigned stopped:1; ++ unsigned disabling:1; ++ unsigned dma:1; ++ unsigned queue_sof:1; ++ ++#ifdef DWC_EN_ISOC ++ /** ISOC req handle passed */ ++ void *iso_req_handle; ++#endif //_EN_ISOC_ ++ ++ /** DWC_otg ep data. */ ++ dwc_ep_t dwc_ep; ++ ++ /** Pointer to PCD */ ++ struct dwc_otg_pcd *pcd; ++ ++ void *priv; ++} dwc_otg_pcd_ep_t; ++ ++/** DWC_otg PCD Structure. ++ * This structure encapsulates the data for the dwc_otg PCD. ++ */ ++struct dwc_otg_pcd { ++ const struct dwc_otg_pcd_function_ops *fops; ++ /** The DWC otg device pointer */ ++ struct dwc_otg_device *otg_dev; ++ /** Core Interface */ ++ dwc_otg_core_if_t *core_if; ++ /** State of EP0 */ ++ ep0state_e ep0state; ++ /** EP0 Request is pending */ ++ unsigned ep0_pending:1; ++ /** Indicates when SET CONFIGURATION Request is in process */ ++ unsigned request_config:1; ++ /** The state of the Remote Wakeup Enable. */ ++ unsigned remote_wakeup_enable:1; ++ /** The state of the B-Device HNP Enable. */ ++ unsigned b_hnp_enable:1; ++ /** The state of A-Device HNP Support. */ ++ unsigned a_hnp_support:1; ++ /** The state of the A-Device Alt HNP support. */ ++ unsigned a_alt_hnp_support:1; ++ /** Count of pending Requests */ ++ unsigned request_pending; ++ ++ /** SETUP packet for EP0 ++ * This structure is allocated as a DMA buffer on PCD initialization ++ * with enough space for up to 3 setup packets. ++ */ ++ union { ++ usb_device_request_t req; ++ uint32_t d32[2]; ++ } *setup_pkt; ++ ++ dwc_dma_t setup_pkt_dma_handle; ++ ++ /* Additional buffer and flag for CTRL_WR premature case */ ++ uint8_t *backup_buf; ++ unsigned data_terminated; ++ ++ /** 2-byte dma buffer used to return status from GET_STATUS */ ++ uint16_t *status_buf; ++ dwc_dma_t status_buf_dma_handle; ++ ++ /** EP0 */ ++ dwc_otg_pcd_ep_t ep0; ++ ++ /** Array of IN EPs. */ ++ dwc_otg_pcd_ep_t in_ep[MAX_EPS_CHANNELS - 1]; ++ /** Array of OUT EPs. */ ++ dwc_otg_pcd_ep_t out_ep[MAX_EPS_CHANNELS - 1]; ++ /** number of valid EPs in the above array. */ ++// unsigned num_eps : 4; ++ dwc_spinlock_t *lock; ++ ++ /** Tasklet to defer starting of TEST mode transmissions until ++ * Status Phase has been completed. ++ */ ++ dwc_tasklet_t *test_mode_tasklet; ++ ++ /** Tasklet to delay starting of xfer in DMA mode */ ++ dwc_tasklet_t *start_xfer_tasklet; ++ ++ /** The test mode to enter when the tasklet is executed. */ ++ unsigned test_mode; ++ /** The cfi_api structure that implements most of the CFI API ++ * and OTG specific core configuration functionality ++ */ ++#ifdef DWC_UTE_CFI ++ struct cfiobject *cfi; ++#endif ++ ++}; ++ ++static inline struct device *dwc_otg_pcd_to_dev(struct dwc_otg_pcd *pcd) ++{ ++ return &pcd->otg_dev->os_dep.platformdev->dev; ++} ++ ++//FIXME this functions should be static, and this prototypes should be removed ++extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep); ++extern void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep, ++ dwc_otg_pcd_request_t * req, int32_t status); ++ ++void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep, ++ void *req_handle); ++ ++extern void do_test_mode(void *data); ++#endif ++#endif /* DWC_HOST_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h +@@ -0,0 +1,361 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_if.h $ ++ * $Revision: #11 $ ++ * $Date: 2011/10/26 $ ++ * $Change: 1873028 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++ ++#if !defined(__DWC_PCD_IF_H__) ++#define __DWC_PCD_IF_H__ ++ ++//#include "dwc_os.h" ++#include "dwc_otg_core_if.h" ++#include "dwc_otg_driver.h" ++ ++/** @file ++ * This file defines DWC_OTG PCD Core API. ++ */ ++ ++struct dwc_otg_pcd; ++typedef struct dwc_otg_pcd dwc_otg_pcd_t; ++ ++/** Maxpacket size for EP0 */ ++#define MAX_EP0_SIZE 64 ++/** Maxpacket size for any EP */ ++#define MAX_PACKET_SIZE 1024 ++ ++/** @name Function Driver Callbacks */ ++/** @{ */ ++ ++/** This function will be called whenever a previously queued request has ++ * completed. The status value will be set to -DWC_E_SHUTDOWN to indicated a ++ * failed or aborted transfer, or -DWC_E_RESTART to indicate the device was reset, ++ * or -DWC_E_TIMEOUT to indicate it timed out, or -DWC_E_INVALID to indicate invalid ++ * parameters. */ ++typedef int (*dwc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int32_t status, ++ uint32_t actual); ++/** ++ * This function will be called whenever a previousle queued ISOC request has ++ * completed. Count of ISOC packets could be read using dwc_otg_pcd_get_iso_packet_count ++ * function. ++ * The status of each ISOC packet could be read using dwc_otg_pcd_get_iso_packet_* ++ * functions. ++ */ ++typedef int (*dwc_isoc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int proc_buf_num); ++/** This function should handle any SETUP request that cannot be handled by the ++ * PCD Core. This includes most GET_DESCRIPTORs, SET_CONFIGS, Any ++ * class-specific requests, etc. The function must non-blocking. ++ * ++ * Returns 0 on success. ++ * Returns -DWC_E_NOT_SUPPORTED if the request is not supported. ++ * Returns -DWC_E_INVALID if the setup request had invalid parameters or bytes. ++ * Returns -DWC_E_SHUTDOWN on any other error. */ ++typedef int (*dwc_setup_cb_t) (dwc_otg_pcd_t * pcd, uint8_t * bytes); ++/** This is called whenever the device has been disconnected. The function ++ * driver should take appropriate action to clean up all pending requests in the ++ * PCD Core, remove all endpoints (except ep0), and initialize back to reset ++ * state. */ ++typedef int (*dwc_disconnect_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called when device has been connected. */ ++typedef int (*dwc_connect_cb_t) (dwc_otg_pcd_t * pcd, int speed); ++/** This function is called when device has been suspended */ ++typedef int (*dwc_suspend_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called when device has received LPM tokens, i.e. ++ * device has been sent to sleep state. */ ++typedef int (*dwc_sleep_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called when device has been resumed ++ * from suspend(L2) or L1 sleep state. */ ++typedef int (*dwc_resume_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called whenever hnp params has been changed. ++ * User can call get_b_hnp_enable, get_a_hnp_support, get_a_alt_hnp_support functions ++ * to get hnp parameters. */ ++typedef int (*dwc_hnp_params_changed_cb_t) (dwc_otg_pcd_t * pcd); ++/** This function is called whenever USB RESET is detected. */ ++typedef int (*dwc_reset_cb_t) (dwc_otg_pcd_t * pcd); ++ ++typedef int (*cfi_setup_cb_t) (dwc_otg_pcd_t * pcd, void *ctrl_req_bytes); ++ ++/** ++ * ++ * @param ep_handle Void pointer to the usb_ep structure ++ * @param ereq_port Pointer to the extended request structure created in the ++ * portable part. ++ */ ++typedef int (*xiso_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int32_t status, ++ void *ereq_port); ++/** Function Driver Ops Data Structure */ ++struct dwc_otg_pcd_function_ops { ++ dwc_connect_cb_t connect; ++ dwc_disconnect_cb_t disconnect; ++ dwc_setup_cb_t setup; ++ dwc_completion_cb_t complete; ++ dwc_isoc_completion_cb_t isoc_complete; ++ dwc_suspend_cb_t suspend; ++ dwc_sleep_cb_t sleep; ++ dwc_resume_cb_t resume; ++ dwc_reset_cb_t reset; ++ dwc_hnp_params_changed_cb_t hnp_changed; ++ cfi_setup_cb_t cfi_setup; ++#ifdef DWC_UTE_PER_IO ++ xiso_completion_cb_t xisoc_complete; ++#endif ++}; ++/** @} */ ++ ++/** @name Function Driver Functions */ ++/** @{ */ ++ ++/** Call this function to get pointer on dwc_otg_pcd_t, ++ * this pointer will be used for all PCD API functions. ++ * ++ * @param core_if The DWC_OTG Core ++ */ ++extern dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_device_t *otg_dev); ++ ++/** Frees PCD allocated by dwc_otg_pcd_init ++ * ++ * @param pcd The PCD ++ */ ++extern void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd); ++ ++/** Call this to bind the function driver to the PCD Core. ++ * ++ * @param pcd Pointer on dwc_otg_pcd_t returned by dwc_otg_pcd_init function. ++ * @param fops The Function Driver Ops data structure containing pointers to all callbacks. ++ */ ++extern void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd, ++ const struct dwc_otg_pcd_function_ops *fops); ++ ++/** Enables an endpoint for use. This function enables an endpoint in ++ * the PCD. The endpoint is described by the ep_desc which has the ++ * same format as a USB ep descriptor. The ep_handle parameter is used to refer ++ * to the endpoint from other API functions and in callbacks. Normally this ++ * should be called after a SET_CONFIGURATION/SET_INTERFACE to configure the ++ * core for that interface. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error ocurred. ++ * Returns 0 on success. ++ * ++ * @param pcd The PCD ++ * @param ep_desc Endpoint descriptor ++ * @param usb_ep Handle on endpoint, that will be used to identify endpoint. ++ */ ++extern int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd, ++ const uint8_t * ep_desc, void *usb_ep); ++ ++/** Disable the endpoint referenced by ep_handle. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error occurred. ++ * Returns 0 on success. */ ++extern int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle); ++ ++/** Queue a data transfer request on the endpoint referenced by ep_handle. ++ * After the transfer is completes, the complete callback will be called with ++ * the request status. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param buf The buffer for the data ++ * @param dma_buf The DMA buffer for the data ++ * @param buflen The length of the data transfer ++ * @param zero Specifies whether to send zero length last packet. ++ * @param req_handle Set this handle to any value to use to reference this ++ * request in the ep_dequeue function or from the complete callback ++ * @param atomic_alloc If driver need to perform atomic allocations ++ * for internal data structures. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error ocurred. ++ * Returns 0 on success. */ ++extern int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf, dwc_dma_t dma_buf, ++ uint32_t buflen, int zero, void *req_handle, ++ int atomic_alloc); ++#ifdef DWC_UTE_PER_IO ++/** ++ * ++ * @param ereq_nonport Pointer to the extended request part of the ++ * usb_request structure defined in usb_gadget.h file. ++ */ ++extern int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf, dwc_dma_t dma_buf, ++ uint32_t buflen, int zero, ++ void *req_handle, int atomic_alloc, ++ void *ereq_nonport); ++ ++#endif ++ ++/** De-queue the specified data transfer that has not yet completed. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error ocurred. ++ * Returns 0 on success. */ ++extern int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle); ++ ++/** Halt (STALL) an endpoint or clear it. ++ * ++ * Returns -DWC_E_INVALID if invalid parameters were passed. ++ * Returns -DWC_E_SHUTDOWN if any other error ocurred. ++ * Returns -DWC_E_AGAIN if the STALL cannot be sent and must be tried again later ++ * Returns 0 on success. */ ++extern int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value); ++ ++/** This function */ ++extern int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle); ++ ++/** This function should be called on every hardware interrupt */ ++extern int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd); ++ ++/** This function returns current frame number */ ++extern int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd); ++ ++/** ++ * Start isochronous transfers on the endpoint referenced by ep_handle. ++ * For isochronous transfers duble buffering is used. ++ * After processing each of buffers comlete callback will be called with ++ * status for each transaction. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param buf0 The virtual address of first data buffer ++ * @param buf1 The virtual address of second data buffer ++ * @param dma0 The DMA address of first data buffer ++ * @param dma1 The DMA address of second data buffer ++ * @param sync_frame Data pattern frame number ++ * @param dp_frame Data size for pattern frame ++ * @param data_per_frame Data size for regular frame ++ * @param start_frame Frame number to start transfers, if -1 then start transfers ASAP. ++ * @param buf_proc_intrvl Interval of ISOC Buffer processing ++ * @param req_handle Handle of ISOC request ++ * @param atomic_alloc Specefies whether to perform atomic allocation for ++ * internal data structures. ++ * ++ * Returns -DWC_E_NO_MEMORY if there is no enough memory. ++ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function. ++ * Returns -DW_E_SHUTDOWN for any other error. ++ * Returns 0 on success ++ */ ++extern int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle, ++ uint8_t * buf0, uint8_t * buf1, ++ dwc_dma_t dma0, dwc_dma_t dma1, ++ int sync_frame, int dp_frame, ++ int data_per_frame, int start_frame, ++ int buf_proc_intrvl, void *req_handle, ++ int atomic_alloc); ++ ++/** Stop ISOC transfers on endpoint referenced by ep_handle. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param req_handle Handle of ISOC request ++ * ++ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function ++ * Returns 0 on success ++ */ ++int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle); ++ ++/** Get ISOC packet status. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param iso_req_handle Isochronoush request handle ++ * @param packet Number of packet ++ * @param status Out parameter for returning status ++ * @param actual Out parameter for returning actual length ++ * @param offset Out parameter for returning offset ++ * ++ */ ++extern void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd, ++ void *ep_handle, ++ void *iso_req_handle, int packet, ++ int *status, int *actual, ++ int *offset); ++ ++/** Get ISOC packet count. ++ * ++ * @param pcd The PCD ++ * @param ep_handle The handle of the endpoint ++ * @param iso_req_handle ++ */ ++extern int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd, ++ void *ep_handle, ++ void *iso_req_handle); ++ ++/** This function starts the SRP Protocol if no session is in progress. If ++ * a session is already in progress, but the device is suspended, ++ * remote wakeup signaling is started. ++ */ ++extern int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd); ++ ++/** This function returns 1 if LPM support is enabled, and 0 otherwise. */ ++extern int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd); ++ ++/** This function returns 1 if remote wakeup is allowed and 0, otherwise. */ ++extern int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd); ++ ++/** Initiate SRP */ ++extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd); ++ ++/** Starts remote wakeup signaling. */ ++extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set); ++ ++/** Starts micorsecond soft disconnect. */ ++extern void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs); ++/** This function returns whether device is dualspeed.*/ ++extern uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd); ++ ++/** This function returns whether device is otg. */ ++extern uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd); ++ ++/** These functions allow to get hnp parameters */ ++extern uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd); ++extern uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd); ++extern uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd); ++ ++/** CFI specific Interface functions */ ++/** Allocate a cfi buffer */ ++extern uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, ++ dwc_dma_t * addr, size_t buflen, ++ int flags); ++ ++/******************************************************************************/ ++ ++/** @} */ ++ ++#endif /* __DWC_PCD_IF_H__ */ ++ ++#endif /* DWC_HOST_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c +@@ -0,0 +1,5148 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $ ++ * $Revision: #116 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++ ++#include "dwc_otg_pcd.h" ++ ++#ifdef DWC_UTE_CFI ++#include "dwc_otg_cfi.h" ++#endif ++ ++#ifdef DWC_UTE_PER_IO ++extern void complete_xiso_ep(dwc_otg_pcd_ep_t * ep); ++#endif ++//#define PRINT_CFI_DMA_DESCS ++ ++#define DEBUG_EP0 ++ ++/** ++ * This function updates OTG. ++ */ ++static void dwc_otg_pcd_update_otg(dwc_otg_pcd_t * pcd, const unsigned reset) ++{ ++ ++ if (reset) { ++ pcd->b_hnp_enable = 0; ++ pcd->a_hnp_support = 0; ++ pcd->a_alt_hnp_support = 0; ++ } ++ ++ if (pcd->fops->hnp_changed) { ++ pcd->fops->hnp_changed(pcd); ++ } ++} ++ ++/** @file ++ * This file contains the implementation of the PCD Interrupt handlers. ++ * ++ * The PCD handles the device interrupts. Many conditions can cause a ++ * device interrupt. When an interrupt occurs, the device interrupt ++ * service routine determines the cause of the interrupt and ++ * dispatches handling to the appropriate function. These interrupt ++ * handling functions are described below. ++ * All interrupt registers are processed from LSB to MSB. ++ */ ++ ++/** ++ * This function prints the ep0 state for debug purposes. ++ */ ++static inline void print_ep0_state(dwc_otg_pcd_t * pcd) ++{ ++#ifdef DEBUG ++ char str[40]; ++ ++ switch (pcd->ep0state) { ++ case EP0_DISCONNECT: ++ dwc_strcpy(str, "EP0_DISCONNECT"); ++ break; ++ case EP0_IDLE: ++ dwc_strcpy(str, "EP0_IDLE"); ++ break; ++ case EP0_IN_DATA_PHASE: ++ dwc_strcpy(str, "EP0_IN_DATA_PHASE"); ++ break; ++ case EP0_OUT_DATA_PHASE: ++ dwc_strcpy(str, "EP0_OUT_DATA_PHASE"); ++ break; ++ case EP0_IN_STATUS_PHASE: ++ dwc_strcpy(str, "EP0_IN_STATUS_PHASE"); ++ break; ++ case EP0_OUT_STATUS_PHASE: ++ dwc_strcpy(str, "EP0_OUT_STATUS_PHASE"); ++ break; ++ case EP0_STALL: ++ dwc_strcpy(str, "EP0_STALL"); ++ break; ++ default: ++ dwc_strcpy(str, "EP0_INVALID"); ++ } ++ ++ DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state); ++#endif ++} ++ ++/** ++ * This function calculate the size of the payload in the memory ++ * for out endpoints and prints size for debug purposes(used in ++ * 2.93a DevOutNak feature). ++ */ ++static inline void print_memory_payload(dwc_otg_pcd_t * pcd, dwc_ep_t * ep) ++{ ++#ifdef DEBUG ++ deptsiz_data_t deptsiz_init = {.d32 = 0 }; ++ deptsiz_data_t deptsiz_updt = {.d32 = 0 }; ++ int pack_num; ++ unsigned payload; ++ ++ deptsiz_init.d32 = pcd->core_if->start_doeptsiz_val[ep->num]; ++ deptsiz_updt.d32 = ++ DWC_READ_REG32(&pcd->core_if->dev_if-> ++ out_ep_regs[ep->num]->doeptsiz); ++ /* Payload will be */ ++ payload = deptsiz_init.b.xfersize - deptsiz_updt.b.xfersize; ++ /* Packet count is decremented every time a packet ++ * is written to the RxFIFO not in to the external memory ++ * So, if payload == 0, then it means no packet was sent to ext memory*/ ++ pack_num = (!payload) ? 0 : (deptsiz_init.b.pktcnt - deptsiz_updt.b.pktcnt); ++ DWC_DEBUGPL(DBG_PCDV, ++ "Payload for EP%d-%s\n", ++ ep->num, (ep->is_in ? "IN" : "OUT")); ++ DWC_DEBUGPL(DBG_PCDV, ++ "Number of transfered bytes = 0x%08x\n", payload); ++ DWC_DEBUGPL(DBG_PCDV, ++ "Number of transfered packets = %d\n", pack_num); ++#endif ++} ++ ++ ++#ifdef DWC_UTE_CFI ++static inline void print_desc(struct dwc_otg_dma_desc *ddesc, ++ const uint8_t * epname, int descnum) ++{ ++ CFI_INFO ++ ("%s DMA_DESC(%d) buf=0x%08x bytes=0x%04x; sp=0x%x; l=0x%x; sts=0x%02x; bs=0x%02x\n", ++ epname, descnum, ddesc->buf, ddesc->status.b.bytes, ++ ddesc->status.b.sp, ddesc->status.b.l, ddesc->status.b.sts, ++ ddesc->status.b.bs); ++} ++#endif ++ ++/** ++ * This function returns pointer to in ep struct with number ep_num ++ */ ++static inline dwc_otg_pcd_ep_t *get_in_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num) ++{ ++ int i; ++ int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps; ++ if (ep_num == 0) { ++ return &pcd->ep0; ++ } else { ++ for (i = 0; i < num_in_eps; ++i) { ++ if (pcd->in_ep[i].dwc_ep.num == ep_num) ++ return &pcd->in_ep[i]; ++ } ++ return 0; ++ } ++} ++ ++/** ++ * This function returns pointer to out ep struct with number ep_num ++ */ ++static inline dwc_otg_pcd_ep_t *get_out_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num) ++{ ++ int i; ++ int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps; ++ if (ep_num == 0) { ++ return &pcd->ep0; ++ } else { ++ for (i = 0; i < num_out_eps; ++i) { ++ if (pcd->out_ep[i].dwc_ep.num == ep_num) ++ return &pcd->out_ep[i]; ++ } ++ return 0; ++ } ++} ++ ++/** ++ * This functions gets a pointer to an EP from the wIndex address ++ * value of the control request. ++ */ ++dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ uint32_t ep_num = UE_GET_ADDR(wIndex); ++ ++ if (ep_num == 0) { ++ ep = &pcd->ep0; ++ } else if (UE_GET_DIR(wIndex) == UE_DIR_IN) { /* in ep */ ++ ep = &pcd->in_ep[ep_num - 1]; ++ } else { ++ ep = &pcd->out_ep[ep_num - 1]; ++ } ++ ++ return ep; ++} ++ ++/** ++ * This function checks the EP request queue, if the queue is not ++ * empty the next request is started. ++ */ ++void start_next_request(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_pcd_request_t *req = 0; ++ uint32_t max_transfer = ++ GET_CORE_IF(ep->pcd)->core_params->max_transfer_size; ++ ++#ifdef DWC_UTE_CFI ++ struct dwc_otg_pcd *pcd; ++ pcd = ep->pcd; ++#endif ++ ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ ++#ifdef DWC_UTE_CFI ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ ep->dwc_ep.cfi_req_len = req->length; ++ pcd->cfi->ops.build_descriptors(pcd->cfi, pcd, ep, req); ++ } else { ++#endif ++ /* Setup and start the Transfer */ ++ if (req->dw_align_buf) { ++ ep->dwc_ep.dma_addr = req->dw_align_buf_dma; ++ ep->dwc_ep.start_xfer_buff = req->dw_align_buf; ++ ep->dwc_ep.xfer_buff = req->dw_align_buf; ++ } else { ++ ep->dwc_ep.dma_addr = req->dma; ++ ep->dwc_ep.start_xfer_buff = req->buf; ++ ep->dwc_ep.xfer_buff = req->buf; ++ } ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = req->length; ++ ep->dwc_ep.xfer_len = 0; ++ ep->dwc_ep.xfer_count = 0; ++ ++ ep->dwc_ep.maxxfer = max_transfer; ++ if (GET_CORE_IF(ep->pcd)->dma_desc_enable) { ++ uint32_t out_max_xfer = DDMA_MAX_TRANSFER_SIZE ++ - (DDMA_MAX_TRANSFER_SIZE % 4); ++ if (ep->dwc_ep.is_in) { ++ if (ep->dwc_ep.maxxfer > ++ DDMA_MAX_TRANSFER_SIZE) { ++ ep->dwc_ep.maxxfer = ++ DDMA_MAX_TRANSFER_SIZE; ++ } ++ } else { ++ if (ep->dwc_ep.maxxfer > out_max_xfer) { ++ ep->dwc_ep.maxxfer = ++ out_max_xfer; ++ } ++ } ++ } ++ if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) { ++ ep->dwc_ep.maxxfer -= ++ (ep->dwc_ep.maxxfer % ep->dwc_ep.maxpacket); ++ } ++ if (req->sent_zlp) { ++ if ((ep->dwc_ep.total_len % ++ ep->dwc_ep.maxpacket == 0) ++ && (ep->dwc_ep.total_len != 0)) { ++ ep->dwc_ep.sent_zlp = 1; ++ } ++ ++ } ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep); ++ } else if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ DWC_PRINTF("There are no more ISOC requests \n"); ++ ep->dwc_ep.frame_num = 0xFFFFFFFF; ++ } ++} ++ ++/** ++ * This function handles the SOF Interrupts. At this time the SOF ++ * Interrupt is disabled. ++ */ ++int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ gintsts_data_t gintsts; ++ ++ DWC_DEBUGPL(DBG_PCD, "SOF\n"); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.sofintr = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This function handles the Rx Status Queue Level Interrupt, which ++ * indicates that there is a least one packet in the Rx FIFO. The ++ * packets are moved from the FIFO to memory, where they will be ++ * processed when the Endpoint Interrupt Register indicates Transfer ++ * Complete or SETUP Phase Done. ++ * ++ * Repeat the following until the Rx Status Queue is empty: ++ * -# Read the Receive Status Pop Register (GRXSTSP) to get Packet ++ * info ++ * -# If Receive FIFO is empty then skip to step Clear the interrupt ++ * and exit ++ * -# If SETUP Packet call dwc_otg_read_setup_packet to copy the ++ * SETUP data to the buffer ++ * -# If OUT Data Packet call dwc_otg_read_packet to copy the data ++ * to the destination buffer ++ */ ++int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t gintmask = {.d32 = 0 }; ++ device_grxsts_data_t status; ++ dwc_otg_pcd_ep_t *ep; ++ gintsts_data_t gintsts; ++#ifdef DEBUG ++ static char *dpid_str[] = { "D0", "D2", "D1", "MDATA" }; ++#endif ++ ++ //DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd); ++ /* Disable the Rx Status Queue Level interrupt */ ++ gintmask.b.rxstsqlvl = 1; ++ DWC_MODIFY_REG32(&global_regs->gintmsk, gintmask.d32, 0); ++ ++ /* Get the Status from the top of the FIFO */ ++ status.d32 = DWC_READ_REG32(&global_regs->grxstsp); ++ ++ DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s " ++ "pktsts:%x Frame:%d(0x%0x)\n", ++ status.b.epnum, status.b.bcnt, ++ dpid_str[status.b.dpid], ++ status.b.pktsts, status.b.fn, status.b.fn); ++ /* Get pointer to EP structure */ ++ ep = get_out_ep(pcd, status.b.epnum); ++ ++ switch (status.b.pktsts) { ++ case DWC_DSTS_GOUT_NAK: ++ DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n"); ++ break; ++ case DWC_STS_DATA_UPDT: ++ DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n"); ++ if (status.b.bcnt && ep->dwc_ep.xfer_buff) { ++ /** @todo NGS Check for buffer overflow? */ ++ dwc_otg_read_packet(core_if, ++ ep->dwc_ep.xfer_buff, ++ status.b.bcnt); ++ ep->dwc_ep.xfer_count += status.b.bcnt; ++ ep->dwc_ep.xfer_buff += status.b.bcnt; ++ } ++ break; ++ case DWC_STS_XFER_COMP: ++ DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n"); ++ break; ++ case DWC_DSTS_SETUP_COMP: ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n"); ++#endif ++ break; ++ case DWC_DSTS_SETUP_UPDT: ++ dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32); ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, ++ "SETUP PKT: %02x.%02x v%04x i%04x l%04x\n", ++ pcd->setup_pkt->req.bmRequestType, ++ pcd->setup_pkt->req.bRequest, ++ UGETW(pcd->setup_pkt->req.wValue), ++ UGETW(pcd->setup_pkt->req.wIndex), ++ UGETW(pcd->setup_pkt->req.wLength)); ++#endif ++ ep->dwc_ep.xfer_count += status.b.bcnt; ++ break; ++ default: ++ DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n", ++ status.b.pktsts); ++ break; ++ } ++ ++ /* Enable the Rx Status Queue Level interrupt */ ++ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmask.d32); ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.rxstsqlvl = 1; ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ //DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__); ++ return 1; ++} ++ ++/** ++ * This function examines the Device IN Token Learning Queue to ++ * determine the EP number of the last IN token received. This ++ * implementation is for the Mass Storage device where there are only ++ * 2 IN EPs (Control-IN and BULK-IN). ++ * ++ * The EP numbers for the first six IN Tokens are in DTKNQR1 and there ++ * are 8 EP Numbers in each of the other possible DTKNQ Registers. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * ++ */ ++static inline int get_ep_of_last_in_token(dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_device_global_regs_t *dev_global_regs = ++ core_if->dev_if->dev_global_regs; ++ const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth; ++ /* Number of Token Queue Registers */ ++ const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8; ++ dtknq1_data_t dtknqr1; ++ uint32_t in_tkn_epnums[4]; ++ int ndx = 0; ++ int i = 0; ++ volatile uint32_t *addr = &dev_global_regs->dtknqr1; ++ int epnum = 0; ++ ++ //DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH); ++ ++ /* Read the DTKNQ Registers */ ++ for (i = 0; i < DTKNQ_REG_CNT; i++) { ++ in_tkn_epnums[i] = DWC_READ_REG32(addr); ++ DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1, ++ in_tkn_epnums[i]); ++ if (addr == &dev_global_regs->dvbusdis) { ++ addr = &dev_global_regs->dtknqr3_dthrctl; ++ } else { ++ ++addr; ++ } ++ ++ } ++ ++ /* Copy the DTKNQR1 data to the bit field. */ ++ dtknqr1.d32 = in_tkn_epnums[0]; ++ /* Get the EP numbers */ ++ in_tkn_epnums[0] = dtknqr1.b.epnums0_5; ++ ndx = dtknqr1.b.intknwptr - 1; ++ ++ //DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx); ++ if (ndx == -1) { ++ /** @todo Find a simpler way to calculate the max ++ * queue position.*/ ++ int cnt = TOKEN_Q_DEPTH; ++ if (TOKEN_Q_DEPTH <= 6) { ++ cnt = TOKEN_Q_DEPTH - 1; ++ } else if (TOKEN_Q_DEPTH <= 14) { ++ cnt = TOKEN_Q_DEPTH - 7; ++ } else if (TOKEN_Q_DEPTH <= 22) { ++ cnt = TOKEN_Q_DEPTH - 15; ++ } else { ++ cnt = TOKEN_Q_DEPTH - 23; ++ } ++ epnum = (in_tkn_epnums[DTKNQ_REG_CNT - 1] >> (cnt * 4)) & 0xF; ++ } else { ++ if (ndx <= 5) { ++ epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF; ++ } else if (ndx <= 13) { ++ ndx -= 6; ++ epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF; ++ } else if (ndx <= 21) { ++ ndx -= 14; ++ epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF; ++ } else if (ndx <= 29) { ++ ndx -= 22; ++ epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF; ++ } ++ } ++ //DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum); ++ return epnum; ++} ++ ++/** ++ * This interrupt occurs when the non-periodic Tx FIFO is half-empty. ++ * The active request is checked for the next packet to be loaded into ++ * the non-periodic Tx FIFO. ++ */ ++int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ gnptxsts_data_t txstatus = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ ++ int epnum = 0; ++ dwc_otg_pcd_ep_t *ep = 0; ++ uint32_t len = 0; ++ int dwords; ++ ++ /* Get the epnum from the IN Token Learning Queue. */ ++ epnum = get_ep_of_last_in_token(core_if); ++ ep = get_in_ep(pcd, epnum); ++ ++ DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %d \n", epnum); ++ ++ ep_regs = core_if->dev_if->in_ep_regs[epnum]; ++ ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ dwords = (len + 3) / 4; ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n", txstatus.d32); ++ ++ while (txstatus.b.nptxqspcavail > 0 && ++ txstatus.b.nptxfspcavail > dwords && ++ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0); ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", txstatus.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", ++ DWC_READ_REG32(&global_regs->gnptxsts)); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.nptxfempty = 1; ++ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This function is called when dedicated Tx FIFO Empty interrupt occurs. ++ * The active request is checked for the next packet to be loaded into ++ * apropriate Tx FIFO. ++ */ ++static int32_t write_empty_tx_fifo(dwc_otg_pcd_t * pcd, uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ dtxfsts_data_t txstatus = {.d32 = 0 }; ++ dwc_otg_pcd_ep_t *ep = 0; ++ uint32_t len = 0; ++ int dwords; ++ ++ ep = get_in_ep(pcd, epnum); ++ ++ DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum); ++ ++ ep_regs = core_if->dev_if->in_ep_regs[epnum]; ++ ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32); ++ ++ while (txstatus.b.txfspcavail > dwords && ++ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len && ++ ep->dwc_ep.xfer_len != 0) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0); ++ ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ ++ dwords = (len + 3) / 4; ++ txstatus.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum, ++ txstatus.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts)); ++ ++ return 1; ++} ++ ++/** ++ * This function is called when the Device is disconnected. It stops ++ * any active requests and informs the Gadget driver of the ++ * disconnect. ++ */ ++void dwc_otg_pcd_stop(dwc_otg_pcd_t * pcd) ++{ ++ int i, num_in_eps, num_out_eps; ++ dwc_otg_pcd_ep_t *ep; ++ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_SPINLOCK(pcd->lock); ++ ++ num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps; ++ num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__); ++ /* don't disconnect drivers more than once */ ++ if (pcd->ep0state == EP0_DISCONNECT) { ++ DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__); ++ DWC_SPINUNLOCK(pcd->lock); ++ return; ++ } ++ pcd->ep0state = EP0_DISCONNECT; ++ ++ /* Reset the OTG state. */ ++ dwc_otg_pcd_update_otg(pcd, 1); ++ ++ /* Disable the NP Tx Fifo Empty Interrupt. */ ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Flush the FIFOs */ ++ /**@todo NGS Flush Periodic FIFOs */ ++ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10); ++ dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd)); ++ ++ /* prevent new request submissions, kill any outstanding requests */ ++ ep = &pcd->ep0; ++ dwc_otg_request_nuke(ep); ++ /* prevent new request submissions, kill any outstanding requests */ ++ for (i = 0; i < num_in_eps; i++) { ++ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i]; ++ dwc_otg_request_nuke(ep); ++ } ++ /* prevent new request submissions, kill any outstanding requests */ ++ for (i = 0; i < num_out_eps; i++) { ++ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i]; ++ dwc_otg_request_nuke(ep); ++ } ++ ++ /* report disconnect; the driver is already quiesced */ ++ if (pcd->fops->disconnect) { ++ DWC_SPINUNLOCK(pcd->lock); ++ pcd->fops->disconnect(pcd); ++ DWC_SPINLOCK(pcd->lock); ++ } ++ DWC_SPINUNLOCK(pcd->lock); ++} ++ ++/** ++ * This interrupt indicates that ... ++ */ ++int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "i2cintr"); ++ intr_mask.b.i2cintr = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.i2cintr = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that ... ++ */ ++int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintsts_data_t gintsts; ++#if defined(VERBOSE) ++ DWC_PRINTF("Early Suspend Detected\n"); ++#endif ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.erlysuspend = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This function configures EPO to receive SETUP packets. ++ * ++ * @todo NGS: Update the comments from the HW FS. ++ * ++ * -# Program the following fields in the endpoint specific registers ++ * for Control OUT EP 0, in order to receive a setup packet ++ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back ++ * setup packets) ++ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back ++ * to back setup packets) ++ * - In DMA mode, DOEPDMA0 Register with a memory address to ++ * store any setup packets received ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param pcd Programming view of the PCD. ++ */ ++static inline void ep0_out_start(dwc_otg_core_if_t * core_if, ++ dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ deptsiz0_data_t doeptsize0 = {.d32 = 0 }; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ depctl_data_t doepctl = {.d32 = 0 }; ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "%s() doepctl0=%0x\n", __func__, ++ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl)); ++#endif ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl); ++ if (doepctl.b.epena) { ++ return; ++ } ++ } ++ ++ doeptsize0.b.supcnt = 3; ++ doeptsize0.b.pktcnt = 1; ++ doeptsize0.b.xfersize = 8 * 3; ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ /** put here as for Hermes mode deptisz register should not be written */ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz, ++ doeptsize0.d32); ++ ++ /** @todo dma needs to handle multiple setup packets (up to 3) */ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma, ++ pcd->setup_pkt_dma_handle); ++ } else { ++ dev_if->setup_desc_index = ++ (dev_if->setup_desc_index + 1) & 1; ++ dma_desc = ++ dev_if->setup_desc_addr[dev_if->setup_desc_index]; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ dma_desc->status.b.sr = 0; ++ dma_desc->status.b.mtrf = 0; ++ } ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket; ++ dma_desc->buf = pcd->setup_pkt_dma_handle; ++ dma_desc->status.b.sts = 0; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DOEPDMA0 Register write */ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma, ++ dev_if->dma_setup_desc_addr ++ [dev_if->setup_desc_index]); ++ } ++ ++ } else { ++ /** put here as for Hermes mode deptisz register should not be written */ ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz, ++ doeptsize0.d32); ++ } ++ ++ /** DOEPCTL0 Register write cnak will be set after setup interrupt */ ++ doepctl.d32 = 0; ++ doepctl.b.epena = 1; ++ if (core_if->snpsid <= OTG_CORE_REV_2_94a) { ++ doepctl.b.cnak = 1; ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); ++ } else { ++ DWC_MODIFY_REG32(&dev_if->out_ep_regs[0]->doepctl, 0, doepctl.d32); ++ } ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n", ++ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl)); ++ DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n", ++ DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl)); ++#endif ++} ++ ++/** ++ * This interrupt occurs when a USB Reset is detected. When the USB ++ * Reset Interrupt occurs the device state is set to DEFAULT and the ++ * EP0 state is set to IDLE. ++ * -# Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1) ++ * -# Unmask the following interrupt bits ++ * - DAINTMSK.INEP0 = 1 (Control 0 IN endpoint) ++ * - DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint) ++ * - DOEPMSK.SETUP = 1 ++ * - DOEPMSK.XferCompl = 1 ++ * - DIEPMSK.XferCompl = 1 ++ * - DIEPMSK.TimeOut = 1 ++ * -# Program the following fields in the endpoint specific registers ++ * for Control OUT EP 0, in order to receive a setup packet ++ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back ++ * setup packets) ++ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back ++ * to back setup packets) ++ * - In DMA mode, DOEPDMA0 Register with a memory address to ++ * store any setup packets received ++ * At this point, all the required initialization, except for enabling ++ * the control 0 OUT endpoint is done, for receiving SETUP packets. ++ */ ++int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ depctl_data_t doepctl = {.d32 = 0 }; ++ depctl_data_t diepctl = {.d32 = 0 }; ++ daint_data_t daintmsk = {.d32 = 0 }; ++ doepmsk_data_t doepmsk = {.d32 = 0 }; ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ dcfg_data_t dcfg = {.d32 = 0 }; ++ grstctl_t resetctl = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ int i = 0; ++ gintsts_data_t gintsts; ++ pcgcctl_data_t power = {.d32 = 0 }; ++ ++ power.d32 = DWC_READ_REG32(core_if->pcgcctl); ++ if (power.b.stoppclk) { ++ power.d32 = 0; ++ power.b.stoppclk = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0); ++ ++ power.b.pwrclmp = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0); ++ ++ power.b.rstpdwnmodule = 1; ++ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0); ++ } ++ ++ core_if->lx_state = DWC_OTG_L0; ++ ++ DWC_PRINTF("USB RESET\n"); ++#ifdef DWC_EN_ISOC ++ for (i = 1; i < 16; ++i) { ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ep = get_in_ep(pcd, i); ++ if (ep != 0) { ++ dwc_ep = &ep->dwc_ep; ++ dwc_ep->next_frame = 0xffffffff; ++ } ++ } ++#endif /* DWC_EN_ISOC */ ++ ++ /* reset the HNP settings */ ++ dwc_otg_pcd_update_otg(pcd, 1); ++ ++ /* Clear the Remote Wakeup Signalling */ ++ dctl.b.rmtwkupsig = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0); ++ ++ /* Set NAK for all OUT EPs */ ++ doepctl.b.snak = 1; ++ for (i = 0; i <= dev_if->num_out_eps; i++) { ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32); ++ } ++ ++ /* Flush the NP Tx FIFO */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10); ++ /* Flush the Learning Queue */ ++ resetctl.b.intknqflsh = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32); ++ ++ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) { ++ core_if->start_predict = 0; ++ for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) { ++ core_if->nextep_seq[i] = 0xff; // 0xff - EP not active ++ } ++ core_if->nextep_seq[0] = 0; ++ core_if->first_in_nextep_seq = 0; ++ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl); ++ diepctl.b.nextep = 0; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); ++ ++ /* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */ ++ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.epmscnt = 2; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", ++ __func__, core_if->first_in_nextep_seq); ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]); ++ } ++ } ++ ++ if (core_if->multiproc_int_enable) { ++ daintmsk.b.inep0 = 1; ++ daintmsk.b.outep0 = 1; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk, ++ daintmsk.d32); ++ ++ doepmsk.b.setup = 1; ++ doepmsk.b.xfercompl = 1; ++ doepmsk.b.ahberr = 1; ++ doepmsk.b.epdisabled = 1; ++ ++ if ((core_if->dma_desc_enable) || ++ (core_if->dma_enable ++ && core_if->snpsid >= OTG_CORE_REV_3_00a)) { ++ doepmsk.b.stsphsercvd = 1; ++ } ++ if (core_if->dma_desc_enable) ++ doepmsk.b.bna = 1; ++/* ++ doepmsk.b.babble = 1; ++ doepmsk.b.nyet = 1; ++ ++ if (core_if->dma_enable) { ++ doepmsk.b.nak = 1; ++ } ++*/ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepeachintmsk[0], ++ doepmsk.d32); ++ ++ diepmsk.b.xfercompl = 1; ++ diepmsk.b.timeout = 1; ++ diepmsk.b.epdisabled = 1; ++ diepmsk.b.ahberr = 1; ++ diepmsk.b.intknepmis = 1; ++ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) ++ diepmsk.b.intknepmis = 0; ++ ++/* if (core_if->dma_desc_enable) { ++ diepmsk.b.bna = 1; ++ } ++*/ ++/* ++ if (core_if->dma_enable) { ++ diepmsk.b.nak = 1; ++ } ++*/ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepeachintmsk[0], ++ diepmsk.d32); ++ } else { ++ daintmsk.b.inep0 = 1; ++ daintmsk.b.outep0 = 1; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk, ++ daintmsk.d32); ++ ++ doepmsk.b.setup = 1; ++ doepmsk.b.xfercompl = 1; ++ doepmsk.b.ahberr = 1; ++ doepmsk.b.epdisabled = 1; ++ ++ if ((core_if->dma_desc_enable) || ++ (core_if->dma_enable ++ && core_if->snpsid >= OTG_CORE_REV_3_00a)) { ++ doepmsk.b.stsphsercvd = 1; ++ } ++ if (core_if->dma_desc_enable) ++ doepmsk.b.bna = 1; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32); ++ ++ diepmsk.b.xfercompl = 1; ++ diepmsk.b.timeout = 1; ++ diepmsk.b.epdisabled = 1; ++ diepmsk.b.ahberr = 1; ++ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) ++ diepmsk.b.intknepmis = 0; ++/* ++ if (core_if->dma_desc_enable) { ++ diepmsk.b.bna = 1; ++ } ++*/ ++ ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32); ++ } ++ ++ /* Reset Device Address */ ++ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.devaddr = 0; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ /* setup EP0 to receive SETUP packets */ ++ if (core_if->snpsid <= OTG_CORE_REV_2_94a) ++ ep0_out_start(core_if, pcd); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.usbreset = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * Get the device speed from the device status register and convert it ++ * to USB speed constant. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static int get_device_speed(dwc_otg_core_if_t * core_if) ++{ ++ dsts_data_t dsts; ++ int speed = 0; ++ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ switch (dsts.b.enumspd) { ++ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: ++ speed = USB_SPEED_HIGH; ++ break; ++ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: ++ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: ++ speed = USB_SPEED_FULL; ++ break; ++ ++ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: ++ speed = USB_SPEED_LOW; ++ break; ++ } ++ ++ return speed; ++} ++ ++/** ++ * Read the device status register and set the device speed in the ++ * data structure. ++ * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate. ++ */ ++int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ gintsts_data_t gintsts; ++ gusbcfg_data_t gusbcfg; ++ dwc_otg_core_global_regs_t *global_regs = ++ GET_CORE_IF(pcd)->core_global_regs; ++ uint8_t utmi16b, utmi8b; ++ int speed; ++ DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n"); ++ ++ if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_2_60a) { ++ utmi16b = 6; //vahrama old value was 6; ++ utmi8b = 9; ++ } else { ++ utmi16b = 4; ++ utmi8b = 8; ++ } ++ dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a) { ++ ep0_out_start(GET_CORE_IF(pcd), pcd); ++ } ++ ++#ifdef DEBUG_EP0 ++ print_ep0_state(pcd); ++#endif ++ ++ if (pcd->ep0state == EP0_DISCONNECT) { ++ pcd->ep0state = EP0_IDLE; ++ } else if (pcd->ep0state == EP0_STALL) { ++ pcd->ep0state = EP0_IDLE; ++ } ++ ++ pcd->ep0state = EP0_IDLE; ++ ++ ep0->stopped = 0; ++ ++ speed = get_device_speed(GET_CORE_IF(pcd)); ++ pcd->fops->connect(pcd, speed); ++ ++ /* Set USB turnaround time based on device speed and PHY interface. */ ++ gusbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); ++ if (speed == USB_SPEED_HIGH) { ++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == ++ DWC_HWCFG2_HS_PHY_TYPE_ULPI) { ++ /* ULPI interface */ ++ gusbcfg.b.usbtrdtim = 9; ++ } ++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == ++ DWC_HWCFG2_HS_PHY_TYPE_UTMI) { ++ /* UTMI+ interface */ ++ if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) { ++ gusbcfg.b.usbtrdtim = utmi8b; ++ } else if (GET_CORE_IF(pcd)->hwcfg4. ++ b.utmi_phy_data_width == 1) { ++ gusbcfg.b.usbtrdtim = utmi16b; ++ } else if (GET_CORE_IF(pcd)-> ++ core_params->phy_utmi_width == 8) { ++ gusbcfg.b.usbtrdtim = utmi8b; ++ } else { ++ gusbcfg.b.usbtrdtim = utmi16b; ++ } ++ } ++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == ++ DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) { ++ /* UTMI+ OR ULPI interface */ ++ if (gusbcfg.b.ulpi_utmi_sel == 1) { ++ /* ULPI interface */ ++ gusbcfg.b.usbtrdtim = 9; ++ } else { ++ /* UTMI+ interface */ ++ if (GET_CORE_IF(pcd)-> ++ core_params->phy_utmi_width == 16) { ++ gusbcfg.b.usbtrdtim = utmi16b; ++ } else { ++ gusbcfg.b.usbtrdtim = utmi8b; ++ } ++ } ++ } ++ } else { ++ /* Full or low speed */ ++ gusbcfg.b.usbtrdtim = 9; ++ } ++ DWC_WRITE_REG32(&global_regs->gusbcfg, gusbcfg.d32); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.enumdone = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that the ISO OUT Packet was dropped due to ++ * Rx FIFO full or Rx Status Queue Full. If this interrupt occurs ++ * read all the data from the Rx FIFO. ++ */ ++int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ ++ DWC_WARN("INTERRUPT Handler not implemented for %s\n", ++ "ISOC Out Dropped"); ++ ++ intr_mask.b.isooutdrop = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.isooutdrop = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates the end of the portion of the micro-frame ++ * for periodic transactions. If there is a periodic transaction for ++ * the next frame, load the packets into the EP periodic Tx FIFO. ++ */ ++int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "EOP"); ++ ++ intr_mask.b.eopframe = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.eopframe = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that EP of the packet on the top of the ++ * non-periodic Tx FIFO does not match EP of the IN Token received. ++ * ++ * The "Device IN Token Queue" Registers are read to determine the ++ * order the IN Tokens have been received. The non-periodic Tx FIFO ++ * is flushed, so it can be reloaded in the order seen in the IN Token ++ * Queue. ++ */ ++int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintsts_data_t gintsts; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dctl_data_t dctl; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) { ++ core_if->start_predict = 1; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if); ++ ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ if (!gintsts.b.ginnakeff) { ++ /* Disable EP Mismatch interrupt */ ++ intr_mask.d32 = 0; ++ intr_mask.b.epmismatch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0); ++ /* Enable the Global IN NAK Effective Interrupt */ ++ intr_mask.d32 = 0; ++ intr_mask.b.ginnakeff = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32); ++ /* Set the global non-periodic IN NAK handshake */ ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); ++ dctl.b.sgnpinnak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); ++ } else { ++ DWC_PRINTF("gintsts.b.ginnakeff = 1! dctl.b.sgnpinnak not set\n"); ++ } ++ /* Disabling of all EP's will be done in dwc_otg_pcd_handle_in_nak_effective() ++ * handler after Global IN NAK Effective interrupt will be asserted */ ++ } ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.epmismatch = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt is valid only in DMA mode. This interrupt indicates that the ++ * core has stopped fetching data for IN endpoints due to the unavailability of ++ * TxFIFO space or Request Queue space. This interrupt is used by the ++ * application for an endpoint mismatch algorithm. ++ * ++ * @param pcd The PCD ++ */ ++int32_t dwc_otg_pcd_handle_ep_fetsusp_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintsts_data_t gintsts; ++ gintmsk_data_t gintmsk_data; ++ dctl_data_t dctl; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if); ++ ++ /* Clear the global non-periodic IN NAK handshake */ ++ dctl.d32 = 0; ++ dctl.b.cgnpinnak = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ ++ /* Mask GINTSTS.FETSUSP interrupt */ ++ gintmsk_data.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); ++ gintmsk_data.b.fetsusp = 0; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk_data.d32); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.fetsusp = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++/** ++ * This funcion stalls EP0. ++ */ ++static inline void ep0_do_stall(dwc_otg_pcd_t * pcd, const int err_val) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ usb_device_request_t *ctrl = &pcd->setup_pkt->req; ++ DWC_WARN("req %02x.%02x protocol STALL; err %d\n", ++ ctrl->bmRequestType, ctrl->bRequest, err_val); ++ ++ ep0->dwc_ep.is_in = 1; ++ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ pcd->ep0.stopped = 1; ++ pcd->ep0state = EP0_IDLE; ++ ep0_out_start(GET_CORE_IF(pcd), pcd); ++} ++ ++/** ++ * This functions delegates the setup command to the gadget driver. ++ */ ++static inline void do_gadget_setup(dwc_otg_pcd_t * pcd, ++ usb_device_request_t * ctrl) ++{ ++ int ret = 0; ++ DWC_SPINUNLOCK(pcd->lock); ++ ret = pcd->fops->setup(pcd, (uint8_t *) ctrl); ++ DWC_SPINLOCK(pcd->lock); ++ if (ret < 0) { ++ ep0_do_stall(pcd, ret); ++ } ++ ++ /** @todo This is a g_file_storage gadget driver specific ++ * workaround: a DELAYED_STATUS result from the fsg_setup ++ * routine will result in the gadget queueing a EP0 IN status ++ * phase for a two-stage control transfer. Exactly the same as ++ * a SET_CONFIGURATION/SET_INTERFACE except that this is a class ++ * specific request. Need a generic way to know when the gadget ++ * driver will queue the status phase. Can we assume when we ++ * call the gadget driver setup() function that it will always ++ * queue and require the following flag? Need to look into ++ * this. ++ */ ++ ++ if (ret == 256 + 999) { ++ pcd->request_config = 1; ++ } ++} ++ ++#ifdef DWC_UTE_CFI ++/** ++ * This functions delegates the CFI setup commands to the gadget driver. ++ * This function will return a negative value to indicate a failure. ++ */ ++static inline int cfi_gadget_setup(dwc_otg_pcd_t * pcd, ++ struct cfi_usb_ctrlrequest *ctrl_req) ++{ ++ int ret = 0; ++ ++ if (pcd->fops && pcd->fops->cfi_setup) { ++ DWC_SPINUNLOCK(pcd->lock); ++ ret = pcd->fops->cfi_setup(pcd, ctrl_req); ++ DWC_SPINLOCK(pcd->lock); ++ if (ret < 0) { ++ ep0_do_stall(pcd, ret); ++ return ret; ++ } ++ } ++ ++ return ret; ++} ++#endif ++ ++/** ++ * This function starts the Zero-Length Packet for the IN status phase ++ * of a 2 stage control transfer. ++ */ ++static inline void do_setup_in_status_phase(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ if (pcd->ep0state == EP0_STALL) { ++ return; ++ } ++ ++ pcd->ep0state = EP0_IN_STATUS_PHASE; ++ ++ /* Prepare for more SETUP Packets */ ++ DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n"); ++ if ((GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a) ++ && (pcd->core_if->dma_desc_enable) ++ && (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len)) { ++ DWC_DEBUGPL(DBG_PCDV, ++ "Data terminated wait next packet in out_desc_addr\n"); ++ pcd->backup_buf = phys_to_virt(ep0->dwc_ep.dma_addr); ++ pcd->data_terminated = 1; ++ } ++ ep0->dwc_ep.xfer_len = 0; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.is_in = 1; ++ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ ++ /* Prepare for more SETUP Packets */ ++ //ep0_out_start(GET_CORE_IF(pcd), pcd); ++} ++ ++/** ++ * This function starts the Zero-Length Packet for the OUT status phase ++ * of a 2 stage control transfer. ++ */ ++static inline void do_setup_out_status_phase(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ if (pcd->ep0state == EP0_STALL) { ++ DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n"); ++ return; ++ } ++ pcd->ep0state = EP0_OUT_STATUS_PHASE; ++ ++ DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n"); ++ ep0->dwc_ep.xfer_len = 0; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.is_in = 0; ++ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ ++ /* Prepare for more SETUP Packets */ ++ if (GET_CORE_IF(pcd)->dma_enable == 0) { ++ ep0_out_start(GET_CORE_IF(pcd), pcd); ++ } ++} ++ ++/** ++ * Clear the EP halt (STALL) and if pending requests start the ++ * transfer. ++ */ ++static inline void pcd_clear_halt(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep) ++{ ++ if (ep->dwc_ep.stall_clear_flag == 0) ++ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep); ++ ++ /* Reactive the EP */ ++ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); ++ if (ep->stopped) { ++ ep->stopped = 0; ++ /* If there is a request in the EP queue start it */ ++ ++ /** @todo FIXME: this causes an EP mismatch in DMA mode. ++ * epmismatch not yet implemented. */ ++ ++ /* ++ * Above fixme is solved by implmenting a tasklet to call the ++ * start_next_request(), outside of interrupt context at some ++ * time after the current time, after a clear-halt setup packet. ++ * Still need to implement ep mismatch in the future if a gadget ++ * ever uses more than one endpoint at once ++ */ ++ ep->queue_sof = 1; ++ DWC_TASK_SCHEDULE(pcd->start_xfer_tasklet); ++ } ++ /* Start Control Status Phase */ ++ do_setup_in_status_phase(pcd); ++} ++ ++/** ++ * This function is called when the SET_FEATURE TEST_MODE Setup packet ++ * is sent from the host. The Device Control register is written with ++ * the Test Mode bits set to the specified Test Mode. This is done as ++ * a tasklet so that the "Status" phase of the control transfer ++ * completes before transmitting the TEST packets. ++ * ++ * @todo This has not been tested since the tasklet struct was put ++ * into the PCD struct! ++ * ++ */ ++void do_test_mode(void *data) ++{ ++ dctl_data_t dctl; ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ int test_mode = pcd->test_mode; ++ ++// DWC_WARN("%s() has not been tested since being rewritten!\n", __func__); ++ ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); ++ switch (test_mode) { ++ case 1: // TEST_J ++ dctl.b.tstctl = 1; ++ break; ++ ++ case 2: // TEST_K ++ dctl.b.tstctl = 2; ++ break; ++ ++ case 3: // TEST_SE0_NAK ++ dctl.b.tstctl = 3; ++ break; ++ ++ case 4: // TEST_PACKET ++ dctl.b.tstctl = 4; ++ break; ++ ++ case 5: // TEST_FORCE_ENABLE ++ dctl.b.tstctl = 5; ++ break; ++ } ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); ++} ++ ++/** ++ * This function process the GET_STATUS Setup Commands. ++ */ ++static inline void do_get_status(dwc_otg_pcd_t * pcd) ++{ ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ uint16_t *status = pcd->status_buf; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, ++ "GET_STATUS %02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bmRequestType, ctrl.bRequest, ++ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), ++ UGETW(ctrl.wLength)); ++#endif ++ ++ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { ++ case UT_DEVICE: ++ if(UGETW(ctrl.wIndex) == 0xF000) { /* OTG Status selector */ ++ DWC_PRINTF("wIndex - %d\n", UGETW(ctrl.wIndex)); ++ DWC_PRINTF("OTG VERSION - %d\n", core_if->otg_ver); ++ DWC_PRINTF("OTG CAP - %d, %d\n", ++ core_if->core_params->otg_cap, ++ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE); ++ if (core_if->otg_ver == 1 ++ && core_if->core_params->otg_cap == ++ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ uint8_t *otgsts = (uint8_t*)pcd->status_buf; ++ *otgsts = (core_if->otg_sts & 0x1); ++ pcd->ep0_pending = 1; ++ ep0->dwc_ep.start_xfer_buff = ++ (uint8_t *) otgsts; ++ ep0->dwc_ep.xfer_buff = (uint8_t *) otgsts; ++ ep0->dwc_ep.dma_addr = ++ pcd->status_buf_dma_handle; ++ ep0->dwc_ep.xfer_len = 1; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ return; ++ } else { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ break; ++ } else { ++ *status = 0x1; /* Self powered */ ++ *status |= pcd->remote_wakeup_enable << 1; ++ break; ++ } ++ case UT_INTERFACE: ++ *status = 0; ++ break; ++ ++ case UT_ENDPOINT: ++ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); ++ if (ep == 0 || UGETW(ctrl.wLength) > 2) { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ /** @todo check for EP stall */ ++ *status = ep->stopped; ++ break; ++ } ++ pcd->ep0_pending = 1; ++ ep0->dwc_ep.start_xfer_buff = (uint8_t *) status; ++ ep0->dwc_ep.xfer_buff = (uint8_t *) status; ++ ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle; ++ ep0->dwc_ep.xfer_len = 2; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); ++} ++ ++/** ++ * This function process the SET_FEATURE Setup Commands. ++ */ ++static inline void do_set_feature(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep = 0; ++ int32_t otg_cap_param = core_if->core_params->otg_cap; ++ gotgctl_data_t gotgctl = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bmRequestType, ctrl.bRequest, ++ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), ++ UGETW(ctrl.wLength)); ++ DWC_DEBUGPL(DBG_PCD, "otg_cap=%d\n", otg_cap_param); ++ ++ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { ++ case UT_DEVICE: ++ switch (UGETW(ctrl.wValue)) { ++ case UF_DEVICE_REMOTE_WAKEUP: ++ pcd->remote_wakeup_enable = 1; ++ break; ++ ++ case UF_TEST_MODE: ++ /* Setup the Test Mode tasklet to do the Test ++ * Packet generation after the SETUP Status ++ * phase has completed. */ ++ ++ /** @todo This has not been tested since the ++ * tasklet struct was put into the PCD ++ * struct! */ ++ pcd->test_mode = UGETW(ctrl.wIndex) >> 8; ++ DWC_TASK_SCHEDULE(pcd->test_mode_tasklet); ++ break; ++ ++ case UF_DEVICE_B_HNP_ENABLE: ++ DWC_DEBUGPL(DBG_PCDV, ++ "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n"); ++ ++ /* dev may initiate HNP */ ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ pcd->b_hnp_enable = 1; ++ dwc_otg_pcd_update_otg(pcd, 0); ++ DWC_DEBUGPL(DBG_PCD, "Request B HNP\n"); ++ /**@todo Is the gotgctl.devhnpen cleared ++ * by a USB Reset? */ ++ gotgctl.b.devhnpen = 1; ++ gotgctl.b.hnpreq = 1; ++ DWC_WRITE_REG32(&global_regs->gotgctl, ++ gotgctl.d32); ++ } else { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ break; ++ ++ case UF_DEVICE_A_HNP_SUPPORT: ++ /* RH port supports HNP */ ++ DWC_DEBUGPL(DBG_PCDV, ++ "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n"); ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ pcd->a_hnp_support = 1; ++ dwc_otg_pcd_update_otg(pcd, 0); ++ } else { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ break; ++ ++ case UF_DEVICE_A_ALT_HNP_SUPPORT: ++ /* other RH port does */ ++ DWC_DEBUGPL(DBG_PCDV, ++ "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n"); ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ pcd->a_alt_hnp_support = 1; ++ dwc_otg_pcd_update_otg(pcd, 0); ++ } else { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ break; ++ ++ default: ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ ++ } ++ do_setup_in_status_phase(pcd); ++ break; ++ ++ case UT_INTERFACE: ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ ++ case UT_ENDPOINT: ++ if (UGETW(ctrl.wValue) == UF_ENDPOINT_HALT) { ++ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); ++ if (ep == 0) { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(core_if, &ep->dwc_ep); ++ } ++ do_setup_in_status_phase(pcd); ++ break; ++ } ++} ++ ++/** ++ * This function process the CLEAR_FEATURE Setup Commands. ++ */ ++static inline void do_clear_feature(dwc_otg_pcd_t * pcd) ++{ ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep = 0; ++ ++ DWC_DEBUGPL(DBG_PCD, ++ "CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bmRequestType, ctrl.bRequest, ++ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), ++ UGETW(ctrl.wLength)); ++ ++ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { ++ case UT_DEVICE: ++ switch (UGETW(ctrl.wValue)) { ++ case UF_DEVICE_REMOTE_WAKEUP: ++ pcd->remote_wakeup_enable = 0; ++ break; ++ ++ case UF_TEST_MODE: ++ /** @todo Add CLEAR_FEATURE for TEST modes. */ ++ break; ++ ++ default: ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ do_setup_in_status_phase(pcd); ++ break; ++ ++ case UT_ENDPOINT: ++ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); ++ if (ep == 0) { ++ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); ++ return; ++ } ++ ++ pcd_clear_halt(pcd, ep); ++ ++ break; ++ } ++} ++ ++/** ++ * This function process the SET_ADDRESS Setup Commands. ++ */ ++static inline void do_set_address(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ ++ if (ctrl.bmRequestType == UT_DEVICE) { ++ dcfg_data_t dcfg = {.d32 = 0 }; ++ ++#ifdef DEBUG_EP0 ++// DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue); ++#endif ++ dcfg.b.devaddr = UGETW(ctrl.wValue); ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32); ++ do_setup_in_status_phase(pcd); ++ } ++} ++ ++/** ++ * This function processes SETUP commands. In Linux, the USB Command ++ * processing is done in two places - the first being the PCD and the ++ * second in the Gadget Driver (for example, the File-Backed Storage ++ * Gadget Driver). ++ * ++ *
Parameter NameMeaning
otg_capSpecifies the OTG capabilities. The driver will automatically detect the ++ value for this parameter if none is specified. ++ - 0: HNP and SRP capable (default, if available) ++ - 1: SRP Only capable ++ - 2: No HNP/SRP capable ++
dma_enableSpecifies whether to use slave or DMA mode for accessing the data FIFOs. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: Slave ++ - 1: DMA (default, if available) ++
dma_burst_sizeThe DMA Burst size (applicable only for External DMA Mode). ++ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32) ++
speedSpecifies the maximum speed of operation in host and device mode. The ++ actual speed depends on the speed of the attached device and the value of ++ phy_type. ++ - 0: High Speed (default) ++ - 1: Full Speed ++
host_support_fs_ls_low_powerSpecifies whether low power mode is supported when attached to a Full ++ Speed or Low Speed device in host mode. ++ - 0: Don't support low power mode (default) ++ - 1: Support low power mode ++
host_ls_low_power_phy_clkSpecifies the PHY clock rate in low power mode when connected to a Low ++ Speed device in host mode. This parameter is applicable only if ++ HOST_SUPPORT_FS_LS_LOW_POWER is enabled. ++ - 0: 48 MHz (default) ++ - 1: 6 MHz ++
enable_dynamic_fifo Specifies whether FIFOs may be resized by the driver software. ++ - 0: Use cC FIFO size parameters ++ - 1: Allow dynamic FIFO sizing (default) ++
data_fifo_sizeTotal number of 4-byte words in the data FIFO memory. This memory ++ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs. ++ - Values: 32 to 32768 (default 8192) ++ ++ Note: The total FIFO memory depth in the FPGA configuration is 8192. ++
dev_rx_fifo_sizeNumber of 4-byte words in the Rx FIFO in device mode when dynamic ++ FIFO sizing is enabled. ++ - Values: 16 to 32768 (default 1064) ++
dev_nperio_tx_fifo_sizeNumber of 4-byte words in the non-periodic Tx FIFO in device mode when ++ dynamic FIFO sizing is enabled. ++ - Values: 16 to 32768 (default 1024) ++
dev_perio_tx_fifo_size_n (n = 1 to 15)Number of 4-byte words in each of the periodic Tx FIFOs in device mode ++ when dynamic FIFO sizing is enabled. ++ - Values: 4 to 768 (default 256) ++
host_rx_fifo_sizeNumber of 4-byte words in the Rx FIFO in host mode when dynamic FIFO ++ sizing is enabled. ++ - Values: 16 to 32768 (default 1024) ++
host_nperio_tx_fifo_sizeNumber of 4-byte words in the non-periodic Tx FIFO in host mode when ++ dynamic FIFO sizing is enabled in the core. ++ - Values: 16 to 32768 (default 1024) ++
host_perio_tx_fifo_sizeNumber of 4-byte words in the host periodic Tx FIFO when dynamic FIFO ++ sizing is enabled. ++ - Values: 16 to 32768 (default 1024) ++
max_transfer_sizeThe maximum transfer size supported in bytes. ++ - Values: 2047 to 65,535 (default 65,535) ++
max_packet_countThe maximum number of packets in a transfer. ++ - Values: 15 to 511 (default 511) ++
host_channelsThe number of host channel registers to use. ++ - Values: 1 to 16 (default 12) ++ ++ Note: The FPGA configuration supports a maximum of 12 host channels. ++
dev_endpointsThe number of endpoints in addition to EP0 available for device mode ++ operations. ++ - Values: 1 to 15 (default 6 IN and OUT) ++ ++ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in ++ addition to EP0. ++
phy_typeSpecifies the type of PHY interface to use. By default, the driver will ++ automatically detect the phy_type. ++ - 0: Full Speed ++ - 1: UTMI+ (default, if available) ++ - 2: ULPI ++
phy_utmi_widthSpecifies the UTMI+ Data Width. This parameter is applicable for a ++ phy_type of UTMI+. Also, this parameter is applicable only if the ++ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the ++ core has been configured to work at either data path width. ++ - Values: 8 or 16 bits (default 16) ++
phy_ulpi_ddrSpecifies whether the ULPI operates at double or single data rate. This ++ parameter is only applicable if phy_type is ULPI. ++ - 0: single data rate ULPI interface with 8 bit wide data bus (default) ++ - 1: double data rate ULPI interface with 4 bit wide data bus ++
i2c_enableSpecifies whether to use the I2C interface for full speed PHY. This ++ parameter is only applicable if PHY_TYPE is FS. ++ - 0: Disabled (default) ++ - 1: Enabled ++
ulpi_fs_lsSpecifies whether to use ULPI FS/LS mode only. ++ - 0: Disabled (default) ++ - 1: Enabled ++
ts_dlineSpecifies whether term select D-Line pulsing for all PHYs is enabled. ++ - 0: Disabled (default) ++ - 1: Enabled ++
en_multiple_tx_fifoSpecifies whether dedicatedto tx fifos are enabled for non periodic IN EPs. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: Disabled ++ - 1: Enabled (default, if available) ++
dev_tx_fifo_size_n (n = 1 to 15)Number of 4-byte words in each of the Tx FIFOs in device mode ++ when dynamic FIFO sizing is enabled. ++ - Values: 4 to 768 (default 256) ++
tx_thr_lengthTransmit Threshold length in 32 bit double words ++ - Values: 8 to 128 (default 64) ++
rx_thr_lengthReceive Threshold length in 32 bit double words ++ - Values: 8 to 128 (default 64) ++
thr_ctlSpecifies whether to enable Thresholding for Device mode. Bits 0, 1, 2 of ++ this parmater specifies if thresholding is enabled for non-Iso Tx, Iso Tx and ++ Rx transfers accordingly. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - Values: 0 to 7 (default 0) ++ Bit values indicate: ++ - 0: Thresholding disabled ++ - 1: Thresholding enabled ++
dma_desc_enableSpecifies whether to enable Descriptor DMA mode. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: Descriptor DMA disabled ++ - 1: Descriptor DMA (default, if available) ++
mpi_enableSpecifies whether to enable MPI enhancement mode. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: MPI disabled (default) ++ - 1: MPI enable ++
pti_enableSpecifies whether to enable PTI enhancement support. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: PTI disabled (default) ++ - 1: PTI enable ++
lpm_enableSpecifies whether to enable LPM support. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: LPM disabled ++ - 1: LPM enable (default, if available) ++
ic_usb_capSpecifies whether to enable IC_USB capability. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: IC_USB disabled (default, if available) ++ - 1: IC_USB enable ++
ahb_thr_ratioSpecifies AHB Threshold ratio. ++ - Values: 0 to 3 (default 0) ++
power_downSpecifies Power Down(Hibernation) Mode. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: Power Down disabled (default) ++ - 2: Power Down enabled ++
reload_ctlSpecifies whether dynamic reloading of the HFIR register is allowed during ++ run time. The driver will automatically detect the value for this parameter if ++ none is specified. In case the HFIR value is reloaded when HFIR.RldCtrl == 1'b0 ++ the core might misbehave. ++ - 0: Reload Control disabled (default) ++ - 1: Reload Control enabled ++
dev_out_nakSpecifies whether Device OUT NAK enhancement enabled or no. ++ The driver will automatically detect the value for this parameter if ++ none is specified. This parameter is valid only when OTG_EN_DESC_DMA == 1b1. ++ - 0: The core does not set NAK after Bulk OUT transfer complete (default) ++ - 1: The core sets NAK after Bulk OUT transfer complete ++
cont_on_bnaSpecifies whether Enable Continue on BNA enabled or no. ++ After receiving BNA interrupt the core disables the endpoint,when the ++ endpoint is re-enabled by the application the ++ - 0: Core starts processing from the DOEPDMA descriptor (default) ++ - 1: Core starts processing from the descriptor which received the BNA. ++ This parameter is valid only when OTG_EN_DESC_DMA == 1b1. ++
ahb_singleThis bit when programmed supports SINGLE transfers for remainder data ++ in a transfer for DMA mode of operation. ++ - 0: The remainder data will be sent using INCR burst size (default) ++ - 1: The remainder data will be sent using SINGLE burst size. ++
adp_enableSpecifies whether ADP feature is enabled. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: ADP feature disabled (default) ++ - 1: ADP feature enabled ++
otg_verSpecifies whether OTG is performing as USB OTG Revision 2.0 or Revision 1.3 ++ USB OTG device. ++ - 0: OTG 2.0 support disabled (default) ++ - 1: OTG 2.0 support enabled ++
++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ * ++ *
Command Driver Description
GET_STATUS PCD Command is processed as ++ * defined in chapter 9 of the USB 2.0 Specification chapter 9 ++ *
CLEAR_FEATURE PCD The Device and Endpoint ++ * requests are the ENDPOINT_HALT feature is procesed, all others the ++ * interface requests are ignored.
SET_FEATURE PCD The Device and Endpoint ++ * requests are processed by the PCD. Interface requests are passed ++ * to the Gadget Driver.
SET_ADDRESS PCD Program the DCFG reg, ++ * with device address received
GET_DESCRIPTOR Gadget Driver Return the ++ * requested descriptor
SET_DESCRIPTOR Gadget Driver Optional - ++ * not implemented by any of the existing Gadget Drivers.
SET_CONFIGURATION Gadget Driver Disable ++ * all EPs and enable EPs for new configuration.
GET_CONFIGURATION Gadget Driver Return ++ * the current configuration
SET_INTERFACE Gadget Driver Disable all ++ * EPs and enable EPs for new configuration.
GET_INTERFACE Gadget Driver Return the ++ * current interface.
SYNC_FRAME PCD Display debug ++ * message.
++ * ++ * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are ++ * processed by pcd_setup. Calling the Function Driver's setup function from ++ * pcd_setup processes the gadget SETUP commands. ++ */ ++static inline void pcd_setup(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ usb_device_request_t ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ ++ deptsiz0_data_t doeptsize0 = {.d32 = 0 }; ++ ++#ifdef DWC_UTE_CFI ++ int retval = 0; ++ struct cfi_usb_ctrlrequest cfi_req; ++#endif ++ ++ doeptsize0.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doeptsiz); ++ ++ /** In BDMA more then 1 setup packet is not supported till 3.00a */ ++ if (core_if->dma_enable && core_if->dma_desc_enable == 0 ++ && (doeptsize0.b.supcnt < 2) ++ && (core_if->snpsid < OTG_CORE_REV_2_94a)) { ++ DWC_ERROR ++ ("\n\n----------- CANNOT handle > 1 setup packet in DMA mode\n\n"); ++ } ++ if ((core_if->snpsid >= OTG_CORE_REV_3_00a) ++ && (core_if->dma_enable == 1) && (core_if->dma_desc_enable == 0)) { ++ ctrl = ++ (pcd->setup_pkt + ++ (3 - doeptsize0.b.supcnt - 1 + ++ ep0->dwc_ep.stp_rollover))->req; ++ } ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bmRequestType, ctrl.bRequest, ++ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), ++ UGETW(ctrl.wLength)); ++#endif ++ ++ /* Clean up the request queue */ ++ dwc_otg_request_nuke(ep0); ++ ep0->stopped = 0; ++ ++ if (ctrl.bmRequestType & UE_DIR_IN) { ++ ep0->dwc_ep.is_in = 1; ++ pcd->ep0state = EP0_IN_DATA_PHASE; ++ } else { ++ ep0->dwc_ep.is_in = 0; ++ pcd->ep0state = EP0_OUT_DATA_PHASE; ++ } ++ ++ if (UGETW(ctrl.wLength) == 0) { ++ ep0->dwc_ep.is_in = 1; ++ pcd->ep0state = EP0_IN_STATUS_PHASE; ++ } ++ ++ if (UT_GET_TYPE(ctrl.bmRequestType) != UT_STANDARD) { ++ ++#ifdef DWC_UTE_CFI ++ DWC_MEMCPY(&cfi_req, &ctrl, sizeof(usb_device_request_t)); ++ ++ //printk(KERN_ALERT "CFI: req_type=0x%02x; req=0x%02x\n", ++ ctrl.bRequestType, ctrl.bRequest); ++ if (UT_GET_TYPE(cfi_req.bRequestType) == UT_VENDOR) { ++ if (cfi_req.bRequest > 0xB0 && cfi_req.bRequest < 0xBF) { ++ retval = cfi_setup(pcd, &cfi_req); ++ if (retval < 0) { ++ ep0_do_stall(pcd, retval); ++ pcd->ep0_pending = 0; ++ return; ++ } ++ ++ /* if need gadget setup then call it and check the retval */ ++ if (pcd->cfi->need_gadget_att) { ++ retval = ++ cfi_gadget_setup(pcd, ++ &pcd-> ++ cfi->ctrl_req); ++ if (retval < 0) { ++ pcd->ep0_pending = 0; ++ return; ++ } ++ } ++ ++ if (pcd->cfi->need_status_in_complete) { ++ do_setup_in_status_phase(pcd); ++ } ++ return; ++ } ++ } ++#endif ++ ++ /* handle non-standard (class/vendor) requests in the gadget driver */ ++ do_gadget_setup(pcd, &ctrl); ++ return; ++ } ++ ++ /** @todo NGS: Handle bad setup packet? */ ++ ++/////////////////////////////////////////// ++//// --- Standard Request handling --- //// ++ ++ switch (ctrl.bRequest) { ++ case UR_GET_STATUS: ++ do_get_status(pcd); ++ break; ++ ++ case UR_CLEAR_FEATURE: ++ do_clear_feature(pcd); ++ break; ++ ++ case UR_SET_FEATURE: ++ do_set_feature(pcd); ++ break; ++ ++ case UR_SET_ADDRESS: ++ do_set_address(pcd); ++ break; ++ ++ case UR_SET_INTERFACE: ++ case UR_SET_CONFIG: ++// _pcd->request_config = 1; /* Configuration changed */ ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ ++ case UR_SYNCH_FRAME: ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ ++ default: ++ /* Call the Gadget Driver's setup functions */ ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ } ++} ++ ++/** ++ * This function completes the ep0 control transfer. ++ */ ++static int32_t ep0_complete_request(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *in_ep_regs = ++ dev_if->in_ep_regs[ep->dwc_ep.num]; ++#ifdef DEBUG_EP0 ++ dwc_otg_dev_out_ep_regs_t *out_ep_regs = ++ dev_if->out_ep_regs[ep->dwc_ep.num]; ++#endif ++ deptsiz0_data_t deptsiz; ++ dev_dma_desc_sts_t desc_sts; ++ dwc_otg_pcd_request_t *req; ++ int is_last = 0; ++ dwc_otg_pcd_t *pcd = ep->pcd; ++ ++#ifdef DWC_UTE_CFI ++ struct cfi_usb_ctrlrequest *ctrlreq; ++ int retval = -DWC_E_NOT_SUPPORTED; ++#endif ++ ++ desc_sts.b.bytes = 0; ++ ++ if (pcd->ep0_pending && DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ if (ep->dwc_ep.is_in) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n"); ++#endif ++ do_setup_out_status_phase(pcd); ++ } else { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n"); ++#endif ++ ++#ifdef DWC_UTE_CFI ++ ctrlreq = &pcd->cfi->ctrl_req; ++ ++ if (UT_GET_TYPE(ctrlreq->bRequestType) == UT_VENDOR) { ++ if (ctrlreq->bRequest > 0xB0 ++ && ctrlreq->bRequest < 0xBF) { ++ ++ /* Return if the PCD failed to handle the request */ ++ if ((retval = ++ pcd->cfi->ops. ++ ctrl_write_complete(pcd->cfi, ++ pcd)) < 0) { ++ CFI_INFO ++ ("ERROR setting a new value in the PCD(%d)\n", ++ retval); ++ ep0_do_stall(pcd, retval); ++ pcd->ep0_pending = 0; ++ return 0; ++ } ++ ++ /* If the gadget needs to be notified on the request */ ++ if (pcd->cfi->need_gadget_att == 1) { ++ //retval = do_gadget_setup(pcd, &pcd->cfi->ctrl_req); ++ retval = ++ cfi_gadget_setup(pcd, ++ &pcd->cfi-> ++ ctrl_req); ++ ++ /* Return from the function if the gadget failed to process ++ * the request properly - this should never happen !!! ++ */ ++ if (retval < 0) { ++ CFI_INFO ++ ("ERROR setting a new value in the gadget(%d)\n", ++ retval); ++ pcd->ep0_pending = 0; ++ return 0; ++ } ++ } ++ ++ CFI_INFO("%s: RETVAL=%d\n", __func__, ++ retval); ++ /* If we hit here then the PCD and the gadget has properly ++ * handled the request - so send the ZLP IN to the host. ++ */ ++ /* @todo: MAS - decide whether we need to start the setup ++ * stage based on the need_setup value of the cfi object ++ */ ++ do_setup_in_status_phase(pcd); ++ pcd->ep0_pending = 0; ++ return 1; ++ } ++ } ++#endif ++ ++ do_setup_in_status_phase(pcd); ++ } ++ pcd->ep0_pending = 0; ++ return 1; ++ } ++ ++ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ return 0; ++ } ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ ++ if (pcd->ep0state == EP0_OUT_STATUS_PHASE ++ || pcd->ep0state == EP0_IN_STATUS_PHASE) { ++ is_last = 1; ++ } else if (ep->dwc_ep.is_in) { ++ deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz); ++ if (core_if->dma_desc_enable != 0) ++ desc_sts = dev_if->in_desc_addr->status; ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "%d len=%d xfersize=%d pktcnt=%d\n", ++ ep->dwc_ep.num, ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++#endif ++ ++ if (((core_if->dma_desc_enable == 0) ++ && (deptsiz.b.xfersize == 0)) ++ || ((core_if->dma_desc_enable != 0) ++ && (desc_sts.b.bytes == 0))) { ++ req->actual = ep->dwc_ep.xfer_count; ++ /* Is a Zero Len Packet needed? */ ++ if (req->sent_zlp) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n"); ++#endif ++ req->sent_zlp = 0; ++ } ++ do_setup_out_status_phase(pcd); ++ } ++ } else { ++ /* ep0-OUT */ ++#ifdef DEBUG_EP0 ++ deptsiz.d32 = DWC_READ_REG32(&out_ep_regs->doeptsiz); ++ DWC_DEBUGPL(DBG_PCDV, "%d len=%d xsize=%d pktcnt=%d\n", ++ ep->dwc_ep.num, ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++#endif ++ req->actual = ep->dwc_ep.xfer_count; ++ ++ /* Is a Zero Len Packet needed? */ ++ if (req->sent_zlp) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n"); ++#endif ++ req->sent_zlp = 0; ++ } ++ /* For older cores do setup in status phase in Slave/BDMA modes, ++ * starting from 3.00 do that only in slave, and for DMA modes ++ * just re-enable ep 0 OUT here*/ ++ if (core_if->dma_enable == 0 ++ || (core_if->dma_desc_enable == 0 ++ && core_if->snpsid <= OTG_CORE_REV_2_94a)) { ++ do_setup_in_status_phase(pcd); ++ } else if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ DWC_DEBUGPL(DBG_PCDV, ++ "Enable out ep before in status phase\n"); ++ ep0_out_start(core_if, pcd); ++ } ++ } ++ ++ /* Complete the request */ ++ if (is_last) { ++ dwc_otg_request_done(ep, req, 0); ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ return 1; ++ } ++ return 0; ++} ++ ++#ifdef DWC_UTE_CFI ++/** ++ * This function calculates traverses all the CFI DMA descriptors and ++ * and accumulates the bytes that are left to be transfered. ++ * ++ * @return The total bytes left to transfered, or a negative value as failure ++ */ ++static inline int cfi_calc_desc_residue(dwc_otg_pcd_ep_t * ep) ++{ ++ int32_t ret = 0; ++ int i; ++ struct dwc_otg_dma_desc *ddesc = NULL; ++ struct cfi_ep *cfiep; ++ ++ /* See if the pcd_ep has its respective cfi_ep mapped */ ++ cfiep = get_cfi_ep_by_pcd_ep(ep->pcd->cfi, ep); ++ if (!cfiep) { ++ CFI_INFO("%s: Failed to find ep\n", __func__); ++ return -1; ++ } ++ ++ ddesc = ep->dwc_ep.descs; ++ ++ for (i = 0; (i < cfiep->desc_count) && (i < MAX_DMA_DESCS_PER_EP); i++) { ++ ++#if defined(PRINT_CFI_DMA_DESCS) ++ print_desc(ddesc, ep->ep.name, i); ++#endif ++ ret += ddesc->status.b.bytes; ++ ddesc++; ++ } ++ ++ if (ret) ++ CFI_INFO("!!!!!!!!!! WARNING (%s) - residue=%d\n", __func__, ++ ret); ++ ++ return ret; ++} ++#endif ++ ++/** ++ * This function completes the request for the EP. If there are ++ * additional requests for the EP in the queue they will be started. ++ */ ++static void complete_ep(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); ++ struct device *dev = dwc_otg_pcd_to_dev(ep->pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *in_ep_regs = ++ dev_if->in_ep_regs[ep->dwc_ep.num]; ++ deptsiz_data_t deptsiz; ++ dev_dma_desc_sts_t desc_sts; ++ dwc_otg_pcd_request_t *req = 0; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ uint32_t byte_count = 0; ++ int is_last = 0; ++ int i; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s() %d-%s\n", __func__, ep->dwc_ep.num, ++ (ep->dwc_ep.is_in ? "IN" : "OUT")); ++ ++ /* Get any pending requests */ ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ if (!req) { ++ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep); ++ return; ++ } ++ } else { ++ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep); ++ return; ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending); ++ ++ if (ep->dwc_ep.is_in) { ++ deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz); ++ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ if (deptsiz.b.xfersize == 0 ++ && deptsiz.b.pktcnt == 0) { ++ byte_count = ++ ep->dwc_ep.xfer_len - ++ ep->dwc_ep.xfer_count; ++ ++ ep->dwc_ep.xfer_buff += byte_count; ++ ep->dwc_ep.dma_addr += byte_count; ++ ep->dwc_ep.xfer_count += byte_count; ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "%d-%s len=%d xfersize=%d pktcnt=%d\n", ++ ep->dwc_ep.num, ++ (ep->dwc_ep. ++ is_in ? "IN" : "OUT"), ++ ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, ++ deptsiz.b.pktcnt); ++ ++ if (ep->dwc_ep.xfer_len < ++ ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer ++ (core_if, &ep->dwc_ep); ++ } else if (ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length transfer in case if it is queued ++ * a transfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Descriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 length. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer ++ (core_if, &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } else { ++ if (ep->dwc_ep.type == ++ DWC_OTG_EP_TYPE_ISOC) { ++ req->actual = 0; ++ dwc_otg_request_done(ep, req, 0); ++ ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ ++ /* If there is a request in the queue start it. */ ++ start_next_request(ep); ++ } else ++ DWC_WARN ++ ("Incomplete transfer (%d - %s [siz=%d pkt=%d])\n", ++ ep->dwc_ep.num, ++ (ep->dwc_ep.is_in ? "IN" : "OUT"), ++ deptsiz.b.xfersize, ++ deptsiz.b.pktcnt); ++ } ++ } else { ++ dma_desc = ep->dwc_ep.desc_addr; ++ byte_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ++#ifdef DWC_UTE_CFI ++ CFI_INFO("%s: BUFFER_MODE=%d\n", __func__, ++ ep->dwc_ep.buff_mode); ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ int residue; ++ ++ residue = cfi_calc_desc_residue(ep); ++ if (residue < 0) ++ return; ++ ++ byte_count = residue; ++ } else { ++#endif ++ for (i = 0; i < ep->dwc_ep.desc_cnt; ++ ++i) { ++ desc_sts = dma_desc->status; ++ byte_count += desc_sts.b.bytes; ++ dma_desc++; ++ } ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ if (byte_count == 0) { ++ ep->dwc_ep.xfer_count = ++ ep->dwc_ep.total_len; ++ is_last = 1; ++ } else { ++ DWC_WARN("Incomplete transfer\n"); ++ } ++ } ++ } else { ++ if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) { ++ DWC_DEBUGPL(DBG_PCDV, ++ "%d-%s len=%d xfersize=%d pktcnt=%d\n", ++ ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT", ++ ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, ++ deptsiz.b.pktcnt); ++ ++ /* Check if the whole transfer was completed, ++ * if no, setup transfer for next portion of data ++ */ ++ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer(core_if, ++ &ep->dwc_ep); ++ } else if (ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length trasfer in case if it is queued ++ * a trasfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Desriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 legth. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer(core_if, ++ &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } else { ++ DWC_WARN ++ ("Incomplete transfer (%d-%s [siz=%d pkt=%d])\n", ++ ep->dwc_ep.num, ++ (ep->dwc_ep.is_in ? "IN" : "OUT"), ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ } ++ } ++ } else { ++ dwc_otg_dev_out_ep_regs_t *out_ep_regs = ++ dev_if->out_ep_regs[ep->dwc_ep.num]; ++ desc_sts.d32 = 0; ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ dma_desc = ep->dwc_ep.desc_addr; ++ byte_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ++#ifdef DWC_UTE_CFI ++ CFI_INFO("%s: BUFFER_MODE=%d\n", __func__, ++ ep->dwc_ep.buff_mode); ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ int residue; ++ residue = cfi_calc_desc_residue(ep); ++ if (residue < 0) ++ return; ++ byte_count = residue; ++ } else { ++#endif ++ ++ for (i = 0; i < ep->dwc_ep.desc_cnt; ++ ++i) { ++ desc_sts = dma_desc->status; ++ byte_count += desc_sts.b.bytes; ++ dma_desc++; ++ } ++ ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ /* Checking for interrupt Out transfers with not ++ * dword aligned mps sizes ++ */ ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_INTR && ++ (ep->dwc_ep.maxpacket%4)) { ++ ep->dwc_ep.xfer_count = ++ ep->dwc_ep.total_len - byte_count; ++ if ((ep->dwc_ep.xfer_len % ++ ep->dwc_ep.maxpacket) ++ && (ep->dwc_ep.xfer_len / ++ ep->dwc_ep.maxpacket < ++ MAX_DMA_DESC_CNT)) ++ ep->dwc_ep.xfer_len -= ++ (ep->dwc_ep.desc_cnt - ++ 1) * ep->dwc_ep.maxpacket + ++ ep->dwc_ep.xfer_len % ++ ep->dwc_ep.maxpacket; ++ else ++ ep->dwc_ep.xfer_len -= ++ ep->dwc_ep.desc_cnt * ++ ep->dwc_ep.maxpacket; ++ if (ep->dwc_ep.xfer_len > 0) { ++ dwc_otg_ep_start_transfer ++ (core_if, &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } else { ++ ep->dwc_ep.xfer_count = ++ ep->dwc_ep.total_len - byte_count + ++ ((4 - ++ (ep->dwc_ep. ++ total_len & 0x3)) & 0x3); ++ is_last = 1; ++ } ++ } else { ++ deptsiz.d32 = 0; ++ deptsiz.d32 = ++ DWC_READ_REG32(&out_ep_regs->doeptsiz); ++ ++ byte_count = (ep->dwc_ep.xfer_len - ++ ep->dwc_ep.xfer_count - ++ deptsiz.b.xfersize); ++ ep->dwc_ep.xfer_buff += byte_count; ++ ep->dwc_ep.dma_addr += byte_count; ++ ep->dwc_ep.xfer_count += byte_count; ++ ++ /* Check if the whole transfer was completed, ++ * if no, setup transfer for next portion of data ++ */ ++ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer(core_if, ++ &ep->dwc_ep); ++ } else if (ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length trasfer in case if it is queued ++ * a trasfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Desriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 legth. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer(core_if, ++ &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } ++ } else { ++ /* Check if the whole transfer was completed, ++ * if no, setup transfer for next portion of data ++ */ ++ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); ++ } else if (ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length transfer in case if it is queued ++ * a transfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Descriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 length. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer(core_if, ++ &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "addr %p, %d-%s len=%d cnt=%d xsize=%d pktcnt=%d\n", ++ &out_ep_regs->doeptsiz, ep->dwc_ep.num, ++ ep->dwc_ep.is_in ? "IN" : "OUT", ++ ep->dwc_ep.xfer_len, ep->dwc_ep.xfer_count, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ } ++ ++ /* Complete the request */ ++ if (is_last) { ++#ifdef DWC_UTE_CFI ++ if (ep->dwc_ep.buff_mode != BM_STANDARD) { ++ req->actual = ep->dwc_ep.cfi_req_len - byte_count; ++ } else { ++#endif ++ req->actual = ep->dwc_ep.xfer_count; ++#ifdef DWC_UTE_CFI ++ } ++#endif ++ if (req->dw_align_buf) { ++ if (!ep->dwc_ep.is_in) { ++ dwc_memcpy(req->buf, req->dw_align_buf, req->length); ++ } ++ DWC_DMA_FREE(dev, req->length, req->dw_align_buf, ++ req->dw_align_buf_dma); ++ } ++ ++ dwc_otg_request_done(ep, req, 0); ++ ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ ++ /* If there is a request in the queue start it. */ ++ start_next_request(ep); ++ } ++} ++ ++#ifdef DWC_EN_ISOC ++ ++/** ++ * This function BNA interrupt for Isochronous EPs ++ * ++ */ ++static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_ep_t *dwc_ep = &ep->dwc_ep; ++ volatile uint32_t *addr; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dwc_otg_pcd_t *pcd = ep->pcd; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ int i; ++ ++ dma_desc = ++ dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num); ++ ++ if (dwc_ep->is_in) { ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) { ++ sts.d32 = dma_desc->status.d32; ++ sts.b_iso_in.bs = BS_HOST_READY; ++ dma_desc->status.d32 = sts.d32; ++ } ++ } else { ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) { ++ sts.d32 = dma_desc->status.d32; ++ sts.b_iso_out.bs = BS_HOST_READY; ++ dma_desc->status.d32 = sts.d32; ++ } ++ } ++ ++ if (dwc_ep->is_in == 0) { ++ addr = ++ &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep-> ++ num]->doepctl; ++ } else { ++ addr = ++ &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ } ++ depctl.b.epena = 1; ++ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32); ++} ++ ++/** ++ * This function sets latest iso packet information(non-PTI mode) ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void set_current_pkt_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ dma_addr_t dma_addr; ++ uint32_t offset; ++ ++ if (ep->proc_buf_num) ++ dma_addr = ep->dma_addr1; ++ else ++ dma_addr = ep->dma_addr0; ++ ++ if (ep->is_in) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[ep->num]->dieptsiz); ++ offset = ep->data_per_frame; ++ } else { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->num]->doeptsiz); ++ offset = ++ ep->data_per_frame + ++ (0x4 & (0x4 - (ep->data_per_frame & 0x3))); ++ } ++ ++ if (!deptsiz.b.xfersize) { ++ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame; ++ ep->pkt_info[ep->cur_pkt].offset = ++ ep->cur_pkt_dma_addr - dma_addr; ++ ep->pkt_info[ep->cur_pkt].status = 0; ++ } else { ++ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame; ++ ep->pkt_info[ep->cur_pkt].offset = ++ ep->cur_pkt_dma_addr - dma_addr; ++ ep->pkt_info[ep->cur_pkt].status = -DWC_E_NO_DATA; ++ } ++ ep->cur_pkt_addr += offset; ++ ep->cur_pkt_dma_addr += offset; ++ ep->cur_pkt++; ++} ++ ++/** ++ * This function sets latest iso packet information(DDMA mode) ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP to start the transfer on. ++ * ++ */ ++static void set_ddma_iso_pkts_info(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * dwc_ep) ++{ ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ iso_pkt_info_t *iso_packet; ++ uint32_t data_per_desc; ++ uint32_t offset; ++ int i, j; ++ ++ iso_packet = dwc_ep->pkt_info; ++ ++ /** Reinit closed DMA Descriptors*/ ++ /** ISO OUT EP */ ++ if (dwc_ep->is_in == 0) { ++ dma_desc = ++ dwc_ep->iso_desc_addr + ++ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ offset = 0; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep-> ++ data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - ++ data_per_desc % ++ 4) : 0; ++ ++ sts.d32 = dma_desc->status.d32; ++ ++ /* Write status in iso_packet_decsriptor */ ++ iso_packet->status = ++ sts.b_iso_out.rxsts + ++ (sts.b_iso_out.bs ^ BS_DMA_DONE); ++ if (iso_packet->status) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ } ++ ++ /* Received data length */ ++ if (!sts.b_iso_out.rxbytes) { ++ iso_packet->length = ++ data_per_desc - ++ sts.b_iso_out.rxbytes; ++ } else { ++ iso_packet->length = ++ data_per_desc - ++ sts.b_iso_out.rxbytes + (4 - ++ dwc_ep->data_per_frame ++ % 4); ++ } ++ ++ iso_packet->offset = offset; ++ ++ offset += data_per_desc; ++ dma_desc++; ++ iso_packet++; ++ } ++ } ++ ++ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ ++ sts.d32 = dma_desc->status.d32; ++ ++ /* Write status in iso_packet_decsriptor */ ++ iso_packet->status = ++ sts.b_iso_out.rxsts + ++ (sts.b_iso_out.bs ^ BS_DMA_DONE); ++ if (iso_packet->status) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ } ++ ++ /* Received data length */ ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes; ++ ++ iso_packet->offset = offset; ++ ++ offset += data_per_desc; ++ iso_packet++; ++ dma_desc++; ++ } ++ ++ sts.d32 = dma_desc->status.d32; ++ ++ /* Write status in iso_packet_decsriptor */ ++ iso_packet->status = ++ sts.b_iso_out.rxsts + (sts.b_iso_out.bs ^ BS_DMA_DONE); ++ if (iso_packet->status) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ } ++ /* Received data length */ ++ if (!sts.b_iso_out.rxbytes) { ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes; ++ } else { ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes + ++ (4 - dwc_ep->data_per_frame % 4); ++ } ++ ++ iso_packet->offset = offset; ++ } else { ++/** ISO IN EP */ ++ ++ dma_desc = ++ dwc_ep->iso_desc_addr + ++ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { ++ sts.d32 = dma_desc->status.d32; ++ ++ /* Write status in iso packet descriptor */ ++ iso_packet->status = ++ sts.b_iso_in.txsts + ++ (sts.b_iso_in.bs ^ BS_DMA_DONE); ++ if (iso_packet->status != 0) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ ++ } ++ /* Bytes has been transfered */ ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_in.txbytes; ++ ++ dma_desc++; ++ iso_packet++; ++ } ++ ++ sts.d32 = dma_desc->status.d32; ++ while (sts.b_iso_in.bs == BS_DMA_BUSY) { ++ sts.d32 = dma_desc->status.d32; ++ } ++ ++ /* Write status in iso packet descriptor ??? do be done with ERROR codes */ ++ iso_packet->status = ++ sts.b_iso_in.txsts + (sts.b_iso_in.bs ^ BS_DMA_DONE); ++ if (iso_packet->status != 0) { ++ iso_packet->status = -DWC_E_NO_DATA; ++ } ++ ++ /* Bytes has been transfered */ ++ iso_packet->length = ++ dwc_ep->data_per_frame - sts.b_iso_in.txbytes; ++ } ++} ++ ++/** ++ * This function reinitialize DMA Descriptors for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP to start the transfer on. ++ * ++ */ ++static void reinit_ddma_iso_xfer(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep) ++{ ++ int i, j; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ dma_addr_t dma_ad; ++ volatile uint32_t *addr; ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ uint32_t data_per_desc; ++ ++ if (dwc_ep->is_in == 0) { ++ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl; ++ } else { ++ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ } ++ ++ if (dwc_ep->proc_buf_num == 0) { ++ /** Buffer 0 descriptors setup */ ++ dma_ad = dwc_ep->dma_addr0; ++ } else { ++ /** Buffer 1 descriptors setup */ ++ dma_ad = dwc_ep->dma_addr1; ++ } ++ ++ /** Reinit closed DMA Descriptors*/ ++ /** ISO OUT EP */ ++ if (dwc_ep->is_in == 0) { ++ dma_desc = ++ dwc_ep->iso_desc_addr + ++ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ ++ sts.b_iso_out.bs = BS_HOST_READY; ++ sts.b_iso_out.rxsts = 0; ++ sts.b_iso_out.l = 0; ++ sts.b_iso_out.sp = 0; ++ sts.b_iso_out.ioc = 0; ++ sts.b_iso_out.pid = 0; ++ sts.b_iso_out.framenum = 0; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; ++ i += dwc_ep->pkt_per_frm) { ++ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep-> ++ data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - ++ data_per_desc % ++ 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dma_ad += data_per_desc; ++ dma_desc++; ++ } ++ } ++ ++ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { ++ ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dma_desc++; ++ dma_ad += data_per_desc; ++ } ++ ++ sts.b_iso_out.ioc = 1; ++ sts.b_iso_out.l = dwc_ep->proc_buf_num; ++ ++ data_per_desc = ++ ((j + 1) * dwc_ep->maxpacket > ++ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - ++ j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += ++ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ } else { ++/** ISO IN EP */ ++ ++ dma_desc = ++ dwc_ep->iso_desc_addr + ++ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ ++ sts.b_iso_in.bs = BS_HOST_READY; ++ sts.b_iso_in.txsts = 0; ++ sts.b_iso_in.sp = 0; ++ sts.b_iso_in.ioc = 0; ++ sts.b_iso_in.pid = dwc_ep->pkt_per_frm; ++ sts.b_iso_in.framenum = dwc_ep->next_frame; ++ sts.b_iso_in.txbytes = dwc_ep->data_per_frame; ++ sts.b_iso_in.l = 0; ++ ++ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ sts.b_iso_in.framenum += dwc_ep->bInterval; ++ dma_ad += dwc_ep->data_per_frame; ++ dma_desc++; ++ } ++ ++ sts.b_iso_in.ioc = 1; ++ sts.b_iso_in.l = dwc_ep->proc_buf_num; ++ ++ dma_desc->buf = dma_ad; ++ dma_desc->status.d32 = sts.d32; ++ ++ dwc_ep->next_frame = ++ sts.b_iso_in.framenum + dwc_ep->bInterval * 1; ++ } ++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; ++} ++ ++/** ++ * This function is to handle Iso EP transfer complete interrupt ++ * in case Iso out packet was dropped ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP for wihich transfer complete was asserted ++ * ++ */ ++static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t * core_if, ++ dwc_ep_t * dwc_ep) ++{ ++ uint32_t dma_addr; ++ uint32_t drp_pkt; ++ uint32_t drp_pkt_cnt; ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ int i; ++ ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[dwc_ep->num]->doeptsiz); ++ ++ drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt; ++ drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm); ++ ++ /* Setting dropped packets status */ ++ for (i = 0; i < drp_pkt_cnt; ++i) { ++ dwc_ep->pkt_info[drp_pkt].status = -DWC_E_NO_DATA; ++ drp_pkt++; ++ deptsiz.b.pktcnt--; ++ } ++ ++ if (deptsiz.b.pktcnt > 0) { ++ deptsiz.b.xfersize = ++ dwc_ep->xfer_len - (dwc_ep->pkt_cnt - ++ deptsiz.b.pktcnt) * dwc_ep->maxpacket; ++ } else { ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 0; ++ } ++ ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz, ++ deptsiz.d32); ++ ++ if (deptsiz.b.pktcnt > 0) { ++ if (dwc_ep->proc_buf_num) { ++ dma_addr = ++ dwc_ep->dma_addr1 + dwc_ep->xfer_len - ++ deptsiz.b.xfersize; ++ } else { ++ dma_addr = ++ dwc_ep->dma_addr0 + dwc_ep->xfer_len - ++ deptsiz.b.xfersize;; ++ } ++ ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ out_ep_regs[dwc_ep->num]->doepdma, dma_addr); ++ ++ /** Re-enable endpoint, clear nak */ ++ depctl.d32 = 0; ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ ++ DWC_MODIFY_REG32(&core_if->dev_if-> ++ out_ep_regs[dwc_ep->num]->doepctl, depctl.d32, ++ depctl.d32); ++ return 0; ++ } else { ++ return 1; ++ } ++} ++ ++/** ++ * This function sets iso packets information(PTI mode) ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++static uint32_t set_iso_pkts_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) ++{ ++ int i, j; ++ dma_addr_t dma_ad; ++ iso_pkt_info_t *packet_info = ep->pkt_info; ++ uint32_t offset; ++ uint32_t frame_data; ++ deptsiz_data_t deptsiz; ++ ++ if (ep->proc_buf_num == 0) { ++ /** Buffer 0 descriptors setup */ ++ dma_ad = ep->dma_addr0; ++ } else { ++ /** Buffer 1 descriptors setup */ ++ dma_ad = ep->dma_addr1; ++ } ++ ++ if (ep->is_in) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> ++ dieptsiz); ++ } else { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[ep->num]-> ++ doeptsiz); ++ } ++ ++ if (!deptsiz.b.xfersize) { ++ offset = 0; ++ for (i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm) { ++ frame_data = ep->data_per_frame; ++ for (j = 0; j < ep->pkt_per_frm; ++j) { ++ ++ /* Packet status - is not set as initially ++ * it is set to 0 and if packet was sent ++ successfully, status field will remain 0*/ ++ ++ /* Bytes has been transfered */ ++ packet_info->length = ++ (ep->maxpacket < ++ frame_data) ? ep->maxpacket : frame_data; ++ ++ /* Received packet offset */ ++ packet_info->offset = offset; ++ offset += packet_info->length; ++ frame_data -= packet_info->length; ++ ++ packet_info++; ++ } ++ } ++ return 1; ++ } else { ++ /* This is a workaround for in case of Transfer Complete with ++ * PktDrpSts interrupts merging - in this case Transfer complete ++ * interrupt for Isoc Out Endpoint is asserted without PktDrpSts ++ * set and with DOEPTSIZ register non zero. Investigations showed, ++ * that this happens when Out packet is dropped, but because of ++ * interrupts merging during first interrupt handling PktDrpSts ++ * bit is cleared and for next merged interrupts it is not reset. ++ * In this case SW hadles the interrupt as if PktDrpSts bit is set. ++ */ ++ if (ep->is_in) { ++ return 1; ++ } else { ++ return handle_iso_out_pkt_dropped(core_if, ep); ++ } ++ } ++} ++ ++/** ++ * This function is to handle Iso EP transfer complete interrupt ++ * ++ * @param pcd The PCD ++ * @param ep The EP for which transfer complete was asserted ++ * ++ */ ++static void complete_iso_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); ++ dwc_ep_t *dwc_ep = &ep->dwc_ep; ++ uint8_t is_last = 0; ++ ++ if (ep->dwc_ep.next_frame == 0xffffffff) { ++ DWC_WARN("Next frame is not set!\n"); ++ return; ++ } ++ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable) { ++ set_ddma_iso_pkts_info(core_if, dwc_ep); ++ reinit_ddma_iso_xfer(core_if, dwc_ep); ++ is_last = 1; ++ } else { ++ if (core_if->pti_enh_enable) { ++ if (set_iso_pkts_info(core_if, dwc_ep)) { ++ dwc_ep->proc_buf_num = ++ (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ dwc_otg_iso_ep_start_buf_transfer ++ (core_if, dwc_ep); ++ is_last = 1; ++ } ++ } else { ++ set_current_pkt_info(core_if, dwc_ep); ++ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ is_last = 1; ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = ++ (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ if (dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr0; ++ } ++ ++ } ++ dwc_otg_iso_ep_start_frm_transfer(core_if, ++ dwc_ep); ++ } ++ } ++ } else { ++ set_current_pkt_info(core_if, dwc_ep); ++ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ is_last = 1; ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ if (dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0; ++ } ++ ++ } ++ dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep); ++ } ++ if (is_last) ++ dwc_otg_iso_buffer_done(pcd, ep, ep->iso_req_handle); ++} ++#endif /* DWC_EN_ISOC */ ++ ++/** ++ * This function handle BNA interrupt for Non Isochronous EPs ++ * ++ */ ++static void dwc_otg_pcd_handle_noniso_bna(dwc_otg_pcd_ep_t * ep) ++{ ++ dwc_ep_t *dwc_ep = &ep->dwc_ep; ++ volatile uint32_t *addr; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dwc_otg_pcd_t *pcd = ep->pcd; ++ dwc_otg_dev_dma_desc_t *dma_desc; ++ dev_dma_desc_sts_t sts = {.d32 = 0 }; ++ dwc_otg_core_if_t *core_if = ep->pcd->core_if; ++ int i, start; ++ ++ if (!dwc_ep->desc_cnt) ++ DWC_WARN("Ep%d %s Descriptor count = %d \n", dwc_ep->num, ++ (dwc_ep->is_in ? "IN" : "OUT"), dwc_ep->desc_cnt); ++ ++ if (core_if->core_params->cont_on_bna && !dwc_ep->is_in ++ && dwc_ep->type != DWC_OTG_EP_TYPE_CONTROL) { ++ uint32_t doepdma; ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[dwc_ep->num]; ++ doepdma = DWC_READ_REG32(&(out_regs->doepdma)); ++ start = (doepdma - dwc_ep->dma_desc_addr)/sizeof(dwc_otg_dev_dma_desc_t); ++ dma_desc = &(dwc_ep->desc_addr[start]); ++ } else { ++ start = 0; ++ dma_desc = dwc_ep->desc_addr; ++ } ++ ++ ++ for (i = start; i < dwc_ep->desc_cnt; ++i, ++dma_desc) { ++ sts.d32 = dma_desc->status.d32; ++ sts.b.bs = BS_HOST_READY; ++ dma_desc->status.d32 = sts.d32; ++ } ++ ++ if (dwc_ep->is_in == 0) { ++ addr = ++ &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]-> ++ doepctl; ++ } else { ++ addr = ++ &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ } ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ DWC_MODIFY_REG32(addr, 0, depctl.d32); ++} ++ ++/** ++ * This function handles EP0 Control transfers. ++ * ++ * The state of the control transfers are tracked in ++ * ep0state. ++ */ ++static void handle_ep0(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ dev_dma_desc_sts_t desc_sts; ++ deptsiz0_data_t deptsiz; ++ uint32_t byte_count; ++ ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__); ++ print_ep0_state(pcd); ++#endif ++ ++// DWC_PRINTF("HANDLE EP0\n"); ++ ++ switch (pcd->ep0state) { ++ case EP0_DISCONNECT: ++ break; ++ ++ case EP0_IDLE: ++ pcd->request_config = 0; ++ ++ pcd_setup(pcd); ++ break; ++ ++ case EP0_IN_DATA_PHASE: ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n", ++ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"), ++ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket); ++#endif ++ ++ if (core_if->dma_enable != 0) { ++ /* ++ * For EP0 we can only program 1 packet at a time so we ++ * need to do the make calculations after each complete. ++ * Call write_packet to make the calculations, as in ++ * slave mode, and use those values to determine if we ++ * can complete. ++ */ ++ if (core_if->dma_desc_enable == 0) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if-> ++ dev_if->in_ep_regs[0]-> ++ dieptsiz); ++ byte_count = ++ ep0->dwc_ep.xfer_len - deptsiz.b.xfersize; ++ } else { ++ desc_sts = ++ core_if->dev_if->in_desc_addr->status; ++ byte_count = ++ ep0->dwc_ep.xfer_len - desc_sts.b.bytes; ++ } ++ ep0->dwc_ep.xfer_count += byte_count; ++ ep0->dwc_ep.xfer_buff += byte_count; ++ ep0->dwc_ep.dma_addr += byte_count; ++ } ++ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) { ++ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); ++ } else if (ep0->dwc_ep.sent_zlp) { ++ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ ep0->dwc_ep.sent_zlp = 0; ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n"); ++ } else { ++ ep0_complete_request(ep0); ++ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n"); ++ } ++ break; ++ case EP0_OUT_DATA_PHASE: ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n", ++ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"), ++ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket); ++#endif ++ if (core_if->dma_enable != 0) { ++ if (core_if->dma_desc_enable == 0) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if-> ++ dev_if->out_ep_regs[0]-> ++ doeptsiz); ++ byte_count = ++ ep0->dwc_ep.maxpacket - deptsiz.b.xfersize; ++ } else { ++ desc_sts = ++ core_if->dev_if->out_desc_addr->status; ++ byte_count = ++ ep0->dwc_ep.maxpacket - desc_sts.b.bytes; ++ } ++ ep0->dwc_ep.xfer_count += byte_count; ++ ep0->dwc_ep.xfer_buff += byte_count; ++ ep0->dwc_ep.dma_addr += byte_count; ++ } ++ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) { ++ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); ++ } else if (ep0->dwc_ep.sent_zlp) { ++ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), ++ &ep0->dwc_ep); ++ ep0->dwc_ep.sent_zlp = 0; ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n"); ++ } else { ++ ep0_complete_request(ep0); ++ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n"); ++ } ++ break; ++ ++ case EP0_IN_STATUS_PHASE: ++ case EP0_OUT_STATUS_PHASE: ++ DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n"); ++ ep0_complete_request(ep0); ++ pcd->ep0state = EP0_IDLE; ++ ep0->stopped = 1; ++ ep0->dwc_ep.is_in = 0; /* OUT for next SETUP */ ++ ++ /* Prepare for more SETUP Packets */ ++ if (core_if->dma_enable) { ++ ep0_out_start(core_if, pcd); ++ } ++ break; ++ ++ case EP0_STALL: ++ DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n"); ++ break; ++ } ++#ifdef DEBUG_EP0 ++ print_ep0_state(pcd); ++#endif ++} ++ ++/** ++ * Restart transfer ++ */ ++static void restart_transfer(dwc_otg_pcd_t * pcd, const uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if; ++ dwc_otg_dev_if_t *dev_if; ++ deptsiz_data_t dieptsiz = {.d32 = 0 }; ++ dwc_otg_pcd_ep_t *ep; ++ ++ ep = get_in_ep(pcd, epnum); ++ ++#ifdef DWC_EN_ISOC ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ return; ++ } ++#endif /* DWC_EN_ISOC */ ++ ++ core_if = GET_CORE_IF(pcd); ++ dev_if = core_if->dev_if; ++ ++ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz); ++ ++ DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x xfer_len=%0x" ++ " stopped=%d\n", ep->dwc_ep.xfer_buff, ++ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len, ep->stopped); ++ /* ++ * If xfersize is 0 and pktcnt in not 0, resend the last packet. ++ */ ++ if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 && ++ ep->dwc_ep.start_xfer_buff != 0) { ++ if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) { ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff; ++ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count; ++ } else { ++ ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket; ++ /* convert packet size to dwords. */ ++ ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket; ++ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count; ++ } ++ ep->stopped = 0; ++ DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x " ++ "xfer_len=%0x stopped=%d\n", ++ ep->dwc_ep.xfer_buff, ++ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len, ++ ep->stopped); ++ if (epnum == 0) { ++ dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep); ++ } else { ++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); ++ } ++ } ++} ++ ++/* ++ * This function create new nextep sequnce based on Learn Queue. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void predict_nextep_seq( dwc_otg_core_if_t * core_if) ++{ ++ dwc_otg_device_global_regs_t *dev_global_regs = ++ core_if->dev_if->dev_global_regs; ++ const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth; ++ /* Number of Token Queue Registers */ ++ const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8; ++ dtknq1_data_t dtknqr1; ++ uint32_t in_tkn_epnums[4]; ++ uint8_t seqnum[MAX_EPS_CHANNELS]; ++ uint8_t intkn_seq[TOKEN_Q_DEPTH]; ++ grstctl_t resetctl = {.d32 = 0 }; ++ uint8_t temp; ++ int ndx = 0; ++ int start = 0; ++ int end = 0; ++ int sort_done = 0; ++ int i = 0; ++ volatile uint32_t *addr = &dev_global_regs->dtknqr1; ++ ++ ++ DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH); ++ ++ /* Read the DTKNQ Registers */ ++ for (i = 0; i < DTKNQ_REG_CNT; i++) { ++ in_tkn_epnums[i] = DWC_READ_REG32(addr); ++ DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1, ++ in_tkn_epnums[i]); ++ if (addr == &dev_global_regs->dvbusdis) { ++ addr = &dev_global_regs->dtknqr3_dthrctl; ++ } else { ++ ++addr; ++ } ++ ++ } ++ ++ /* Copy the DTKNQR1 data to the bit field. */ ++ dtknqr1.d32 = in_tkn_epnums[0]; ++ if (dtknqr1.b.wrap_bit) { ++ ndx = dtknqr1.b.intknwptr; ++ end = ndx -1; ++ if (end < 0) ++ end = TOKEN_Q_DEPTH -1; ++ } else { ++ ndx = 0; ++ end = dtknqr1.b.intknwptr -1; ++ if (end < 0) ++ end = 0; ++ } ++ start = ndx; ++ ++ /* Fill seqnum[] by initial values: EP number + 31 */ ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ seqnum[i] = i +31; ++ } ++ ++ /* Fill intkn_seq[] from in_tkn_epnums[0] */ ++ for (i=0; i < 6; i++) ++ intkn_seq[i] = (in_tkn_epnums[0] >> ((7-i) * 4)) & 0xf; ++ ++ if (TOKEN_Q_DEPTH > 6) { ++ /* Fill intkn_seq[] from in_tkn_epnums[1] */ ++ for (i=6; i < 14; i++) ++ intkn_seq[i] = ++ (in_tkn_epnums[1] >> ((7 - (i - 6)) * 4)) & 0xf; ++ } ++ ++ if (TOKEN_Q_DEPTH > 14) { ++ /* Fill intkn_seq[] from in_tkn_epnums[1] */ ++ for (i=14; i < 22; i++) ++ intkn_seq[i] = ++ (in_tkn_epnums[2] >> ((7 - (i - 14)) * 4)) & 0xf; ++ } ++ ++ if (TOKEN_Q_DEPTH > 22) { ++ /* Fill intkn_seq[] from in_tkn_epnums[1] */ ++ for (i=22; i < 30; i++) ++ intkn_seq[i] = ++ (in_tkn_epnums[3] >> ((7 - (i - 22)) * 4)) & 0xf; ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s start=%d end=%d intkn_seq[]:\n", __func__, ++ start, end); ++ for (i=0; idev_if->num_in_eps; i++) { ++ if (core_if->nextep_seq[i] == 0xff ) ++ seqnum[i] = 0xff; ++ } ++ ++ /* Sort seqnum[] */ ++ sort_done = 0; ++ while (!sort_done) { ++ sort_done = 1; ++ for (i=0; idev_if->num_in_eps; i++) { ++ if (seqnum[i] > seqnum[i+1]) { ++ temp = seqnum[i]; ++ seqnum[i] = seqnum[i+1]; ++ seqnum[i+1] = temp; ++ sort_done = 0; ++ } ++ } ++ } ++ ++ ndx = start + seqnum[0]; ++ if (ndx >= TOKEN_Q_DEPTH) ++ ndx = ndx % TOKEN_Q_DEPTH; ++ core_if->first_in_nextep_seq = intkn_seq[ndx]; ++ ++ /* Update seqnum[] by EP numbers */ ++ for (i=0; i<=core_if->dev_if->num_in_eps; i++) { ++ ndx = start + i; ++ if (seqnum[i] < 31) { ++ ndx = start + seqnum[i]; ++ if (ndx >= TOKEN_Q_DEPTH) ++ ndx = ndx % TOKEN_Q_DEPTH; ++ seqnum[i] = intkn_seq[ndx]; ++ } else { ++ if (seqnum[i] < 0xff) { ++ seqnum[i] = seqnum[i] - 31; ++ } else { ++ break; ++ } ++ } ++ } ++ ++ /* Update nextep_seq[] based on seqnum[] */ ++ for (i=0; idev_if->num_in_eps; i++) { ++ if (seqnum[i] != 0xff) { ++ if (seqnum[i+1] != 0xff) { ++ core_if->nextep_seq[seqnum[i]] = seqnum[i+1]; ++ } else { ++ core_if->nextep_seq[seqnum[i]] = core_if->first_in_nextep_seq; ++ break; ++ } ++ } else { ++ break; ++ } ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", ++ __func__, core_if->first_in_nextep_seq); ++ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { ++ DWC_DEBUGPL(DBG_PCDV,"%2d\n", core_if->nextep_seq[i]); ++ } ++ ++ /* Flush the Learning Queue */ ++ resetctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->grstctl); ++ resetctl.b.intknqflsh = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32); ++ ++ ++} ++ ++/** ++ * handle the IN EP disable interrupt. ++ */ ++static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ deptsiz_data_t dieptsiz = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ gintmsk_data_t gintmsk_data; ++ depctl_data_t depctl; ++ uint32_t diepdma; ++ uint32_t remain_to_transfer = 0; ++ uint8_t i; ++ uint32_t xfer_size; ++ ++ ep = get_in_ep(pcd, epnum); ++ dwc_ep = &ep->dwc_ep; ++ ++ if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num); ++ complete_ep(ep); ++ return; ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "diepctl%d=%0x\n", epnum, ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl)); ++ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz); ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl); ++ ++ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n", ++ dieptsiz.b.pktcnt, dieptsiz.b.xfersize); ++ ++ if ((core_if->start_predict == 0) || (depctl.b.eptype & 1)) { ++ if (ep->stopped) { ++ if (core_if->en_multiple_tx_fifo) ++ /* Flush the Tx FIFO */ ++ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num); ++ /* Clear the Global IN NP NAK */ ++ dctl.d32 = 0; ++ dctl.b.cgnpinnak = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ /* Restart the transaction */ ++ if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) { ++ restart_transfer(pcd, epnum); ++ } ++ } else { ++ /* Restart the transaction */ ++ if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) { ++ restart_transfer(pcd, epnum); ++ } ++ DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n"); ++ } ++ return; ++ } ++ ++ if (core_if->start_predict > 2) { // NP IN EP ++ core_if->start_predict--; ++ return; ++ } ++ ++ core_if->start_predict--; ++ ++ if (core_if->start_predict == 1) { // All NP IN Ep's disabled now ++ ++ predict_nextep_seq(core_if); ++ ++ /* Update all active IN EP's NextEP field based of nextep_seq[] */ ++ for ( i = 0; i <= core_if->dev_if->num_in_eps; i++) { ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (core_if->nextep_seq[i] != 0xff) { // Active NP IN EP ++ depctl.b.nextep = core_if->nextep_seq[i]; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); ++ } ++ } ++ /* Flush Shared NP TxFIFO */ ++ dwc_otg_flush_tx_fifo(core_if, 0); ++ /* Rewind buffers */ ++ if (!core_if->dma_desc_enable) { ++ i = core_if->first_in_nextep_seq; ++ do { ++ ep = get_in_ep(pcd, i); ++ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz); ++ xfer_size = ep->dwc_ep.total_len - ep->dwc_ep.xfer_count; ++ if (xfer_size > ep->dwc_ep.maxxfer) ++ xfer_size = ep->dwc_ep.maxxfer; ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (dieptsiz.b.pktcnt != 0) { ++ if (xfer_size == 0) { ++ remain_to_transfer = 0; ++ } else { ++ if ((xfer_size % ep->dwc_ep.maxpacket) == 0) { ++ remain_to_transfer = ++ dieptsiz.b.pktcnt * ep->dwc_ep.maxpacket; ++ } else { ++ remain_to_transfer = ((dieptsiz.b.pktcnt -1) * ep->dwc_ep.maxpacket) ++ + (xfer_size % ep->dwc_ep.maxpacket); ++ } ++ } ++ diepdma = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepdma); ++ dieptsiz.b.xfersize = remain_to_transfer; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, dieptsiz.d32); ++ diepdma = ep->dwc_ep.dma_addr + (xfer_size - remain_to_transfer); ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, diepdma); ++ } ++ i = core_if->nextep_seq[i]; ++ } while (i != core_if->first_in_nextep_seq); ++ } else { // dma_desc_enable ++ DWC_PRINTF("%s Learning Queue not supported in DDMA\n", __func__); ++ } ++ ++ /* Restart transfers in predicted sequences */ ++ i = core_if->first_in_nextep_seq; ++ do { ++ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz); ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (dieptsiz.b.pktcnt != 0) { ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); ++ } ++ i = core_if->nextep_seq[i]; ++ } while (i != core_if->first_in_nextep_seq); ++ ++ /* Clear the global non-periodic IN NAK handshake */ ++ dctl.d32 = 0; ++ dctl.b.cgnpinnak = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ ++ /* Unmask EP Mismatch interrupt */ ++ gintmsk_data.d32 = 0; ++ gintmsk_data.b.epmismatch = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, gintmsk_data.d32); ++ ++ core_if->start_predict = 0; ++ ++ } ++} ++ ++/** ++ * Handler for the IN EP timeout handshake interrupt. ++ */ ++static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ ++#ifdef DEBUG ++ deptsiz_data_t dieptsiz = {.d32 = 0 }; ++ uint32_t num = 0; ++#endif ++ dctl_data_t dctl = {.d32 = 0 }; ++ dwc_otg_pcd_ep_t *ep; ++ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ ep = get_in_ep(pcd, epnum); ++ ++ /* Disable the NP Tx Fifo Empty Interrrupt */ ++ if (!core_if->dma_enable) { ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ } ++ /** @todo NGS Check EP type. ++ * Implement for Periodic EPs */ ++ /* ++ * Non-periodic EP ++ */ ++ /* Enable the Global IN NAK Effective Interrupt */ ++ intr_mask.b.ginnakeff = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32); ++ ++ /* Set Global IN NAK */ ++ dctl.b.sgnpinnak = 1; ++ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ ++ ep->stopped = 1; ++ ++#ifdef DEBUG ++ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[num]->dieptsiz); ++ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n", ++ dieptsiz.b.pktcnt, dieptsiz.b.xfersize); ++#endif ++ ++#ifdef DISABLE_PERIODIC_EP ++ /* ++ * Set the NAK bit for this EP to ++ * start the disable process. ++ */ ++ diepctl.d32 = 0; ++ diepctl.b.snak = 1; ++ DWC_MODIFY_REG32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32, ++ diepctl.d32); ++ ep->disabling = 1; ++ ep->stopped = 1; ++#endif ++} ++ ++/** ++ * Handler for the IN EP NAK interrupt. ++ */ ++static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t *core_if; ++ diepmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "IN EP NAK"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.nak = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ diepeachintmsk[epnum], intr_mask.d32, 0); ++ } else { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->diepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * Handler for the OUT EP Babble interrupt. ++ */ ++static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t *core_if; ++ doepmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", ++ "OUT EP Babble"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.babble = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[epnum], intr_mask.d32, 0); ++ } else { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * Handler for the OUT EP NAK interrupt. ++ */ ++static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t *core_if; ++ doepmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_ANY, "INTERRUPT Handler not implemented for %s\n", "OUT EP NAK"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.nak = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[epnum], intr_mask.d32, 0); ++ } else { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * Handler for the OUT EP NYET interrupt. ++ */ ++static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t * pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t *core_if; ++ doepmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.nyet = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> ++ doepeachintmsk[epnum], intr_mask.d32, 0); ++ } else { ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that an IN EP has a pending Interrupt. ++ * The sequence for handling the IN EP interrupt is shown below: ++ * -# Read the Device All Endpoint Interrupt register ++ * -# Repeat the following for each IN EP interrupt bit set (from ++ * LSB to MSB). ++ * -# Read the Device Endpoint Interrupt (DIEPINTn) register ++ * -# If "Transfer Complete" call the request complete function ++ * -# If "Endpoint Disabled" complete the EP disable procedure. ++ * -# If "AHB Error Interrupt" log error ++ * -# If "Time-out Handshake" log error ++ * -# If "IN Token Received when TxFIFO Empty" write packet to Tx ++ * FIFO. ++ * -# If "IN Token EP Mismatch" (disable, this is handled by EP ++ * Mismatch Interrupt) ++ */ ++static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t * pcd) ++{ ++#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \ ++do { \ ++ diepint_data_t diepint = {.d32=0}; \ ++ diepint.b.__intr = 1; \ ++ DWC_WRITE_REG32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \ ++ diepint.d32); \ ++} while (0) ++ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ diepint_data_t diepint = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ uint32_t ep_intr; ++ uint32_t epnum = 0; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd); ++ ++ /* Read in the device interrupt bits */ ++ ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if); ++ ++ /* Service the Device IN interrupts for each endpoint */ ++ while (ep_intr) { ++ if (ep_intr & 0x1) { ++ uint32_t empty_msk; ++ /* Get EP pointer */ ++ ep = get_in_ep(pcd, epnum); ++ dwc_ep = &ep->dwc_ep; ++ ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl); ++ empty_msk = ++ DWC_READ_REG32(&dev_if-> ++ dev_global_regs->dtknqr4_fifoemptymsk); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "IN EP INTERRUPT - %d\nepmty_msk - %8x diepctl - %8x\n", ++ epnum, empty_msk, depctl.d32); ++ ++ DWC_DEBUGPL(DBG_PCD, ++ "EP%d-%s: type=%d, mps=%d\n", ++ dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"), ++ dwc_ep->type, dwc_ep->maxpacket); ++ ++ diepint.d32 = ++ dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP %d Interrupt Register - 0x%x\n", epnum, ++ diepint.d32); ++ /* Transfer complete */ ++ if (diepint.b.xfercompl) { ++ /* Disable the NP Tx FIFO Empty ++ * Interrupt */ ++ if (core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ DWC_MODIFY_REG32 ++ (&core_if->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ } else { ++ /* Disable the Tx FIFO Empty Interrupt for this EP */ ++ uint32_t fifoemptymsk = ++ 0x1 << dwc_ep->num; ++ DWC_MODIFY_REG32(&core_if-> ++ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ fifoemptymsk, 0); ++ } ++ /* Clear the bit in DIEPINTn for this interrupt */ ++ CLEAR_IN_EP_INTR(core_if, epnum, xfercompl); ++ ++ /* Complete the transfer */ ++ if (epnum == 0) { ++ handle_ep0(pcd); ++ } ++#ifdef DWC_EN_ISOC ++ else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (!ep->stopped) ++ complete_iso_ep(pcd, ep); ++ } ++#endif /* DWC_EN_ISOC */ ++#ifdef DWC_UTE_PER_IO ++ else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (!ep->stopped) ++ complete_xiso_ep(ep); ++ } ++#endif /* DWC_UTE_PER_IO */ ++ else { ++ if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC && ++ dwc_ep->bInterval > 1) { ++ dwc_ep->frame_num += dwc_ep->bInterval; ++ if (dwc_ep->frame_num > 0x3FFF) ++ { ++ dwc_ep->frm_overrun = 1; ++ dwc_ep->frame_num &= 0x3FFF; ++ } else ++ dwc_ep->frm_overrun = 0; ++ } ++ complete_ep(ep); ++ if(diepint.b.nak) ++ CLEAR_IN_EP_INTR(core_if, epnum, nak); ++ } ++ } ++ /* Endpoint disable */ ++ if (diepint.b.epdisabled) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d IN disabled\n", ++ epnum); ++ handle_in_ep_disable_intr(pcd, epnum); ++ ++ /* Clear the bit in DIEPINTn for this interrupt */ ++ CLEAR_IN_EP_INTR(core_if, epnum, epdisabled); ++ } ++ /* AHB Error */ ++ if (diepint.b.ahberr) { ++ DWC_ERROR("EP%d IN AHB Error\n", epnum); ++ /* Clear the bit in DIEPINTn for this interrupt */ ++ CLEAR_IN_EP_INTR(core_if, epnum, ahberr); ++ } ++ /* TimeOUT Handshake (non-ISOC IN EPs) */ ++ if (diepint.b.timeout) { ++ DWC_ERROR("EP%d IN Time-out\n", epnum); ++ handle_in_ep_timeout_intr(pcd, epnum); ++ ++ CLEAR_IN_EP_INTR(core_if, epnum, timeout); ++ } ++ /** IN Token received with TxF Empty */ ++ if (diepint.b.intktxfemp) { ++ DWC_DEBUGPL(DBG_ANY, ++ "EP%d IN TKN TxFifo Empty\n", ++ epnum); ++ if (!ep->stopped && epnum != 0) { ++ ++ diepmsk_data_t diepmsk = {.d32 = 0 }; ++ diepmsk.b.intktxfemp = 1; ++ ++ if (core_if->multiproc_int_enable) { ++ DWC_MODIFY_REG32 ++ (&dev_if->dev_global_regs->diepeachintmsk ++ [epnum], diepmsk.d32, 0); ++ } else { ++ DWC_MODIFY_REG32 ++ (&dev_if->dev_global_regs->diepmsk, ++ diepmsk.d32, 0); ++ } ++ } else if (core_if->dma_desc_enable ++ && epnum == 0 ++ && pcd->ep0state == ++ EP0_OUT_STATUS_PHASE) { ++ // EP0 IN set STALL ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs ++ [epnum]->diepctl); ++ ++ /* set the disable and stall bits */ ++ if (depctl.b.epena) { ++ depctl.b.epdis = 1; ++ } ++ depctl.b.stall = 1; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs ++ [epnum]->diepctl, ++ depctl.d32); ++ } ++ CLEAR_IN_EP_INTR(core_if, epnum, intktxfemp); ++ } ++ /** IN Token Received with EP mismatch */ ++ if (diepint.b.intknepmis) { ++ DWC_DEBUGPL(DBG_ANY, ++ "EP%d IN TKN EP Mismatch\n", epnum); ++ CLEAR_IN_EP_INTR(core_if, epnum, intknepmis); ++ } ++ /** IN Endpoint NAK Effective */ ++ if (diepint.b.inepnakeff) { ++ DWC_DEBUGPL(DBG_ANY, ++ "EP%d IN EP NAK Effective\n", ++ epnum); ++ /* Periodic EP */ ++ if (ep->disabling) { ++ depctl.d32 = 0; ++ depctl.b.snak = 1; ++ depctl.b.epdis = 1; ++ DWC_MODIFY_REG32(&dev_if->in_ep_regs ++ [epnum]->diepctl, ++ depctl.d32, ++ depctl.d32); ++ } ++ CLEAR_IN_EP_INTR(core_if, epnum, inepnakeff); ++ ++ } ++ ++ /** IN EP Tx FIFO Empty Intr */ ++ if (diepint.b.emptyintr) { ++ DWC_DEBUGPL(DBG_ANY, ++ "EP%d Tx FIFO Empty Intr \n", ++ epnum); ++ write_empty_tx_fifo(pcd, epnum); ++ ++ CLEAR_IN_EP_INTR(core_if, epnum, emptyintr); ++ ++ } ++ ++ /** IN EP BNA Intr */ ++ if (diepint.b.bna) { ++ CLEAR_IN_EP_INTR(core_if, epnum, bna); ++ if (core_if->dma_desc_enable) { ++#ifdef DWC_EN_ISOC ++ if (dwc_ep->type == ++ DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * This checking is performed to prevent first "false" BNA ++ * handling occuring right after reconnect ++ */ ++ if (dwc_ep->next_frame != ++ 0xffffffff) ++ dwc_otg_pcd_handle_iso_bna(ep); ++ } else ++#endif /* DWC_EN_ISOC */ ++ { ++ dwc_otg_pcd_handle_noniso_bna(ep); ++ } ++ } ++ } ++ /* NAK Interrutp */ ++ if (diepint.b.nak) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d IN NAK Interrupt\n", ++ epnum); ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ depctl_data_t depctl; ++ if (ep->dwc_ep.frame_num == 0xFFFFFFFF) { ++ ep->dwc_ep.frame_num = core_if->frame_num; ++ if (ep->dwc_ep.bInterval > 1) { ++ depctl.d32 = 0; ++ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl); ++ if (ep->dwc_ep.frame_num & 0x1) { ++ depctl.b.setd1pid = 1; ++ depctl.b.setd0pid = 0; ++ } else { ++ depctl.b.setd0pid = 1; ++ depctl.b.setd1pid = 0; ++ } ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32); ++ } ++ start_next_request(ep); ++ } ++ ep->dwc_ep.frame_num += ep->dwc_ep.bInterval; ++ if (dwc_ep->frame_num > 0x3FFF) { ++ dwc_ep->frm_overrun = 1; ++ dwc_ep->frame_num &= 0x3FFF; ++ } else ++ dwc_ep->frm_overrun = 0; ++ } ++ ++ CLEAR_IN_EP_INTR(core_if, epnum, nak); ++ } ++ } ++ epnum++; ++ ep_intr >>= 1; ++ } ++ ++ return 1; ++#undef CLEAR_IN_EP_INTR ++} ++ ++/** ++ * This interrupt indicates that an OUT EP has a pending Interrupt. ++ * The sequence for handling the OUT EP interrupt is shown below: ++ * -# Read the Device All Endpoint Interrupt register ++ * -# Repeat the following for each OUT EP interrupt bit set (from ++ * LSB to MSB). ++ * -# Read the Device Endpoint Interrupt (DOEPINTn) register ++ * -# If "Transfer Complete" call the request complete function ++ * -# If "Endpoint Disabled" complete the EP disable procedure. ++ * -# If "AHB Error Interrupt" log error ++ * -# If "Setup Phase Done" process Setup Packet (See Standard USB ++ * Command Processing) ++ */ ++static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t * pcd) ++{ ++#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \ ++do { \ ++ doepint_data_t doepint = {.d32=0}; \ ++ doepint.b.__intr = 1; \ ++ DWC_WRITE_REG32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \ ++ doepint.d32); \ ++} while (0) ++ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ uint32_t ep_intr; ++ doepint_data_t doepint = {.d32 = 0 }; ++ uint32_t epnum = 0; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ dctl_data_t dctl = {.d32 = 0 }; ++ gintmsk_data_t gintmsk = {.d32 = 0 }; ++ ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__); ++ ++ /* Read in the device interrupt bits */ ++ ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if); ++ ++ while (ep_intr) { ++ if (ep_intr & 0x1) { ++ /* Get EP pointer */ ++ ep = get_out_ep(pcd, epnum); ++ dwc_ep = &ep->dwc_ep; ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP%d-%s: type=%d, mps=%d\n", ++ dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"), ++ dwc_ep->type, dwc_ep->maxpacket); ++#endif ++ doepint.d32 = ++ dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep); ++ /* Moved this interrupt upper due to core deffect of asserting ++ * OUT EP 0 xfercompl along with stsphsrcvd in BDMA */ ++ if (doepint.b.stsphsercvd) { ++ deptsiz0_data_t deptsiz; ++ CLEAR_OUT_EP_INTR(core_if, epnum, stsphsercvd); ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[0]->doeptsiz); ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a ++ && core_if->dma_enable ++ && core_if->dma_desc_enable == 0 ++ && doepint.b.xfercompl ++ && deptsiz.b.xfersize == 24) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, ++ xfercompl); ++ doepint.b.xfercompl = 0; ++ ep0_out_start(core_if, pcd); ++ } ++ if ((core_if->dma_desc_enable) || ++ (core_if->dma_enable ++ && core_if->snpsid >= ++ OTG_CORE_REV_3_00a)) { ++ do_setup_in_status_phase(pcd); ++ } ++ } ++ /* Transfer complete */ ++ if (doepint.b.xfercompl) { ++ ++ if (epnum == 0) { ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl); ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { ++ DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n", ++ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepint), ++ doepint.d32); ++ DWC_DEBUGPL(DBG_PCDV, "DOEPCTL=%x \n", ++ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepctl)); ++ ++ if (core_if->snpsid >= OTG_CORE_REV_3_00a ++ && core_if->dma_enable == 0) { ++ doepint_data_t doepint; ++ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[0]->doepint); ++ if (pcd->ep0state == EP0_IDLE && doepint.b.sr) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, sr); ++ goto exit_xfercompl; ++ } ++ } ++ /* In case of DDMA look at SR bit to go to the Data Stage */ ++ if (core_if->dma_desc_enable) { ++ dev_dma_desc_sts_t status = {.d32 = 0}; ++ if (pcd->ep0state == EP0_IDLE) { ++ status.d32 = core_if->dev_if->setup_desc_addr[core_if-> ++ dev_if->setup_desc_index]->status.d32; ++ if(pcd->data_terminated) { ++ pcd->data_terminated = 0; ++ status.d32 = core_if->dev_if->out_desc_addr->status.d32; ++ dwc_memcpy(&pcd->setup_pkt->req, pcd->backup_buf, 8); ++ } ++ if (status.b.sr) { ++ if (doepint.b.setup) { ++ DWC_DEBUGPL(DBG_PCDV, "DMA DESC EP0_IDLE SR=1 setup=1\n"); ++ /* Already started data stage, clear setup */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, setup); ++ doepint.b.setup = 0; ++ handle_ep0(pcd); ++ /* Prepare for more setup packets */ ++ if (pcd->ep0state == EP0_IN_STATUS_PHASE || ++ pcd->ep0state == EP0_IN_DATA_PHASE) { ++ ep0_out_start(core_if, pcd); ++ } ++ ++ goto exit_xfercompl; ++ } else { ++ /* Prepare for more setup packets */ ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP0_IDLE SR=1 setup=0 new setup comes\n"); ++ ep0_out_start(core_if, pcd); ++ } ++ } ++ } else { ++ dwc_otg_pcd_request_t *req; ++ dev_dma_desc_sts_t status = {.d32 = 0}; ++ diepint_data_t diepint0; ++ diepint0.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint); ++ ++ if (pcd->ep0state == EP0_STALL || pcd->ep0state == EP0_DISCONNECT) { ++ DWC_ERROR("EP0 is stalled/disconnected\n"); ++ } ++ ++ /* Clear IN xfercompl if set */ ++ if (diepint0.b.xfercompl && (pcd->ep0state == EP0_IN_STATUS_PHASE ++ || pcd->ep0state == EP0_IN_DATA_PHASE)) { ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint, diepint0.d32); ++ } ++ ++ status.d32 = core_if->dev_if->setup_desc_addr[core_if-> ++ dev_if->setup_desc_index]->status.d32; ++ ++ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len ++ && (pcd->ep0state == EP0_OUT_DATA_PHASE)) ++ status.d32 = core_if->dev_if->out_desc_addr->status.d32; ++ if (pcd->ep0state == EP0_OUT_STATUS_PHASE) ++ status.d32 = core_if->dev_if-> ++ out_desc_addr->status.d32; ++ ++ if (status.b.sr) { ++ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n"); ++ } else { ++ DWC_DEBUGPL(DBG_PCDV, "complete req!!\n"); ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len && ++ pcd->ep0state == EP0_OUT_DATA_PHASE) { ++ /* Read arrived setup packet from req->buf */ ++ dwc_memcpy(&pcd->setup_pkt->req, ++ req->buf + ep->dwc_ep.xfer_count, 8); ++ } ++ req->actual = ep->dwc_ep.xfer_count; ++ dwc_otg_request_done(ep, req, -ECONNRESET); ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ } ++ pcd->ep0state = EP0_IDLE; ++ if (doepint.b.setup) { ++ DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n"); ++ /* Data stage started, clear setup */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, setup); ++ doepint.b.setup = 0; ++ handle_ep0(pcd); ++ /* Prepare for setup packets if ep0in was enabled*/ ++ if (pcd->ep0state == EP0_IN_STATUS_PHASE) { ++ ep0_out_start(core_if, pcd); ++ } ++ ++ goto exit_xfercompl; ++ } else { ++ /* Prepare for more setup packets */ ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP0_IDLE SR=1 setup=0 new setup comes 2\n"); ++ ep0_out_start(core_if, pcd); ++ } ++ } ++ } ++ } ++ if (core_if->snpsid >= OTG_CORE_REV_2_94a && core_if->dma_enable ++ && core_if->dma_desc_enable == 0) { ++ doepint_data_t doepint_temp = {.d32 = 0}; ++ deptsiz0_data_t doeptsize0 = {.d32 = 0 }; ++ doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->dwc_ep.num]->doepint); ++ doeptsize0.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->dwc_ep.num]->doeptsiz); ++ if (pcd->ep0state == EP0_IDLE) { ++ if (doepint_temp.b.sr) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, sr); ++ } ++ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[0]->doepint); ++ if (doeptsize0.b.supcnt == 3) { ++ DWC_DEBUGPL(DBG_ANY, "Rolling over!!!!!!!\n"); ++ ep->dwc_ep.stp_rollover = 1; ++ } ++ if (doepint.b.setup) { ++retry: ++ /* Already started data stage, clear setup */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, setup); ++ doepint.b.setup = 0; ++ handle_ep0(pcd); ++ ep->dwc_ep.stp_rollover = 0; ++ /* Prepare for more setup packets */ ++ if (pcd->ep0state == EP0_IN_STATUS_PHASE || ++ pcd->ep0state == EP0_IN_DATA_PHASE) { ++ ep0_out_start(core_if, pcd); ++ } ++ goto exit_xfercompl; ++ } else { ++ /* Prepare for more setup packets */ ++ DWC_DEBUGPL(DBG_ANY, ++ "EP0_IDLE SR=1 setup=0 new setup comes\n"); ++ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[0]->doepint); ++ if(doepint.b.setup) ++ goto retry; ++ ep0_out_start(core_if, pcd); ++ } ++ } else { ++ dwc_otg_pcd_request_t *req; ++ diepint_data_t diepint0 = {.d32 = 0}; ++ doepint_data_t doepint_temp = {.d32 = 0}; ++ depctl_data_t diepctl0; ++ diepint0.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint); ++ diepctl0.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepctl); ++ ++ if (pcd->ep0state == EP0_IN_DATA_PHASE ++ || pcd->ep0state == EP0_IN_STATUS_PHASE) { ++ if (diepint0.b.xfercompl) { ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint, diepint0.d32); ++ } ++ if (diepctl0.b.epena) { ++ diepint_data_t diepint = {.d32 = 0}; ++ diepctl0.b.snak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepctl, diepctl0.d32); ++ do { ++ dwc_udelay(10); ++ diepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint); ++ } while (!diepint.b.inepnakeff); ++ diepint.b.inepnakeff = 1; ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint, diepint.d32); ++ diepctl0.d32 = 0; ++ diepctl0.b.epdis = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl, ++ diepctl0.d32); ++ do { ++ dwc_udelay(10); ++ diepint.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ in_ep_regs[0]->diepint); ++ } while (!diepint.b.epdisabled); ++ diepint.b.epdisabled = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepint, ++ diepint.d32); ++ } ++ } ++ doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[ep->dwc_ep.num]->doepint); ++ if (doepint_temp.b.sr) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, sr); ++ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n"); ++ } else { ++ DWC_DEBUGPL(DBG_PCDV, "complete req!!\n"); ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len && ++ pcd->ep0state == EP0_OUT_DATA_PHASE) { ++ /* Read arrived setup packet from req->buf */ ++ dwc_memcpy(&pcd->setup_pkt->req, ++ req->buf + ep->dwc_ep.xfer_count, 8); ++ } ++ req->actual = ep->dwc_ep.xfer_count; ++ dwc_otg_request_done(ep, req, -ECONNRESET); ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ } ++ pcd->ep0state = EP0_IDLE; ++ if (doepint.b.setup) { ++ DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n"); ++ /* Data stage started, clear setup */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, setup); ++ doepint.b.setup = 0; ++ handle_ep0(pcd); ++ /* Prepare for setup packets if ep0in was enabled*/ ++ if (pcd->ep0state == EP0_IN_STATUS_PHASE) { ++ ep0_out_start(core_if, pcd); ++ } ++ goto exit_xfercompl; ++ } else { ++ /* Prepare for more setup packets */ ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP0_IDLE SR=1 setup=0 new setup comes 2\n"); ++ ep0_out_start(core_if, pcd); ++ } ++ } ++ } ++ } ++ if (core_if->dma_enable == 0 || pcd->ep0state != EP0_IDLE) ++ handle_ep0(pcd); ++exit_xfercompl: ++ DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n", ++ dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep), doepint.d32); ++ } else { ++ if (core_if->dma_desc_enable == 0 ++ || pcd->ep0state != EP0_IDLE) ++ handle_ep0(pcd); ++ } ++#ifdef DWC_EN_ISOC ++ } else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (doepint.b.pktdrpsts == 0) { ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if, ++ epnum, ++ xfercompl); ++ complete_iso_ep(pcd, ep); ++ } else { ++ ++ doepint_data_t doepint = {.d32 = 0 }; ++ doepint.b.xfercompl = 1; ++ doepint.b.pktdrpsts = 1; ++ DWC_WRITE_REG32 ++ (&core_if->dev_if->out_ep_regs ++ [epnum]->doepint, ++ doepint.d32); ++ if (handle_iso_out_pkt_dropped ++ (core_if, dwc_ep)) { ++ complete_iso_ep(pcd, ++ ep); ++ } ++ } ++#endif /* DWC_EN_ISOC */ ++#ifdef DWC_UTE_PER_IO ++ } else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl); ++ if (!ep->stopped) ++ complete_xiso_ep(ep); ++#endif /* DWC_UTE_PER_IO */ ++ } else { ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, ++ xfercompl); ++ ++ if (core_if->core_params->dev_out_nak) { ++ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[epnum]); ++ pcd->core_if->ep_xfer_info[epnum].state = 0; ++#ifdef DEBUG ++ print_memory_payload(pcd, dwc_ep); ++#endif ++ } ++ complete_ep(ep); ++ } ++ ++ } ++ ++ /* Endpoint disable */ ++ if (doepint.b.epdisabled) { ++ ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if, epnum, epdisabled); ++ if (core_if->core_params->dev_out_nak) { ++#ifdef DEBUG ++ print_memory_payload(pcd, dwc_ep); ++#endif ++ /* In case of timeout condition */ ++ if (core_if->ep_xfer_info[epnum].state == 2) { ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->dctl); ++ dctl.b.cgoutnak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, ++ dctl.d32); ++ /* Unmask goutnakeff interrupt which was masked ++ * during handle nak out interrupt */ ++ gintmsk.b.goutnakeff = 1; ++ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, ++ 0, gintmsk.d32); ++ ++ complete_ep(ep); ++ } ++ } ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) ++ { ++ dctl_data_t dctl; ++ gintmsk_data_t intr_mask = {.d32 = 0}; ++ dwc_otg_pcd_request_t *req = 0; ++ ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ dev_global_regs->dctl); ++ dctl.b.cgoutnak = 1; ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, ++ dctl.d32); ++ ++ intr_mask.d32 = 0; ++ intr_mask.b.incomplisoout = 1; ++ ++ /* Get any pending requests */ ++ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { ++ req = DWC_CIRCLEQ_FIRST(&ep->queue); ++ if (!req) { ++ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep); ++ } else { ++ dwc_otg_request_done(ep, req, 0); ++ start_next_request(ep); ++ } ++ } else { ++ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep); ++ } ++ } ++ } ++ /* AHB Error */ ++ if (doepint.b.ahberr) { ++ DWC_ERROR("EP%d OUT AHB Error\n", epnum); ++ DWC_ERROR("EP%d DEPDMA=0x%08x \n", ++ epnum, core_if->dev_if->out_ep_regs[epnum]->doepdma); ++ CLEAR_OUT_EP_INTR(core_if, epnum, ahberr); ++ } ++ /* Setup Phase Done (contorl EPs) */ ++ if (doepint.b.setup) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "EP%d SETUP Done\n", epnum); ++#endif ++ CLEAR_OUT_EP_INTR(core_if, epnum, setup); ++ ++ handle_ep0(pcd); ++ } ++ ++ /** OUT EP BNA Intr */ ++ if (doepint.b.bna) { ++ CLEAR_OUT_EP_INTR(core_if, epnum, bna); ++ if (core_if->dma_desc_enable) { ++#ifdef DWC_EN_ISOC ++ if (dwc_ep->type == ++ DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * This checking is performed to prevent first "false" BNA ++ * handling occuring right after reconnect ++ */ ++ if (dwc_ep->next_frame != ++ 0xffffffff) ++ dwc_otg_pcd_handle_iso_bna(ep); ++ } else ++#endif /* DWC_EN_ISOC */ ++ { ++ dwc_otg_pcd_handle_noniso_bna(ep); ++ } ++ } ++ } ++ /* Babble Interrupt */ ++ if (doepint.b.babble) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d OUT Babble\n", ++ epnum); ++ handle_out_ep_babble_intr(pcd, epnum); ++ ++ CLEAR_OUT_EP_INTR(core_if, epnum, babble); ++ } ++ if (doepint.b.outtknepdis) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d OUT Token received when EP is \ ++ disabled\n",epnum); ++ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ doepmsk_data_t doepmsk = {.d32 = 0}; ++ ep->dwc_ep.frame_num = core_if->frame_num; ++ if (ep->dwc_ep.bInterval > 1) { ++ depctl_data_t depctl; ++ depctl.d32 = DWC_READ_REG32(&core_if->dev_if-> ++ out_ep_regs[epnum]->doepctl); ++ if (ep->dwc_ep.frame_num & 0x1) { ++ depctl.b.setd1pid = 1; ++ depctl.b.setd0pid = 0; ++ } else { ++ depctl.b.setd0pid = 1; ++ depctl.b.setd1pid = 0; ++ } ++ DWC_WRITE_REG32(&core_if->dev_if-> ++ out_ep_regs[epnum]->doepctl, depctl.d32); ++ } ++ start_next_request(ep); ++ doepmsk.b.outtknepdis = 1; ++ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, ++ doepmsk.d32, 0); ++ } ++ CLEAR_OUT_EP_INTR(core_if, epnum, outtknepdis); ++ } ++ ++ /* NAK Interrutp */ ++ if (doepint.b.nak) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d OUT NAK\n", epnum); ++ handle_out_ep_nak_intr(pcd, epnum); ++ ++ CLEAR_OUT_EP_INTR(core_if, epnum, nak); ++ } ++ /* NYET Interrutp */ ++ if (doepint.b.nyet) { ++ DWC_DEBUGPL(DBG_ANY, "EP%d OUT NYET\n", epnum); ++ handle_out_ep_nyet_intr(pcd, epnum); ++ ++ CLEAR_OUT_EP_INTR(core_if, epnum, nyet); ++ } ++ } ++ ++ epnum++; ++ ep_intr >>= 1; ++ } ++ ++ return 1; ++ ++#undef CLEAR_OUT_EP_INTR ++} ++static int drop_transfer(uint32_t trgt_fr, uint32_t curr_fr, uint8_t frm_overrun) ++{ ++ int retval = 0; ++ if(!frm_overrun && curr_fr >= trgt_fr) ++ retval = 1; ++ else if (frm_overrun ++ && (curr_fr >= trgt_fr && ((curr_fr - trgt_fr) < 0x3FFF / 2))) ++ retval = 1; ++ return retval; ++} ++/** ++ * Incomplete ISO IN Transfer Interrupt. ++ * This interrupt indicates one of the following conditions occurred ++ * while transmitting an ISOC transaction. ++ * - Corrupted IN Token for ISOC EP. ++ * - Packet not complete in FIFO. ++ * The follow actions will be taken: ++ * -# Determine the EP ++ * -# Set incomplete flag in dwc_ep structure ++ * -# Disable EP; when "Endpoint Disabled" interrupt is received ++ * Flush FIFO ++ */ ++int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t * pcd) ++{ ++ gintsts_data_t gintsts; ++ ++#ifdef DWC_EN_ISOC ++ dwc_otg_dev_if_t *dev_if; ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dsts_data_t dsts = {.d32 = 0 }; ++ dwc_ep_t *dwc_ep; ++ int i; ++ ++ dev_if = GET_CORE_IF(pcd)->dev_if; ++ ++ for (i = 1; i <= dev_if->num_in_eps; ++i) { ++ dwc_ep = &pcd->in_ep[i].dwc_ep; ++ if (dwc_ep->active && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz); ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ ++ if (depctl.b.epdis && deptsiz.d32) { ++ set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep); ++ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = ++ (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ ++ if (dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr0; ++ } ++ ++ } ++ ++ dsts.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if-> ++ dev_global_regs->dsts); ++ dwc_ep->next_frame = dsts.b.soffn; ++ ++ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF ++ (pcd), ++ dwc_ep); ++ } ++ } ++ } ++ ++#else ++ depctl_data_t depctl = {.d32 = 0 }; ++ dwc_ep_t *dwc_ep; ++ dwc_otg_dev_if_t *dev_if; ++ int i; ++ dev_if = GET_CORE_IF(pcd)->dev_if; ++ ++ DWC_DEBUGPL(DBG_PCD,"Incomplete ISO IN \n"); ++ ++ for (i = 1; i <= dev_if->num_in_eps; ++i) { ++ dwc_ep = &pcd->in_ep[i-1].dwc_ep; ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (depctl.b.epena && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (drop_transfer(dwc_ep->frame_num, GET_CORE_IF(pcd)->frame_num, ++ dwc_ep->frm_overrun)) ++ { ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ depctl.b.snak = 1; ++ depctl.b.epdis = 1; ++ DWC_MODIFY_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32, depctl.d32); ++ } ++ } ++ } ++ ++ /*intr_mask.b.incomplisoin = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); */ ++#endif //DWC_EN_ISOC ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.incomplisoin = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * Incomplete ISO OUT Transfer Interrupt. ++ * ++ * This interrupt indicates that the core has dropped an ISO OUT ++ * packet. The following conditions can be the cause: ++ * - FIFO Full, the entire packet would not fit in the FIFO. ++ * - CRC Error ++ * - Corrupted Token ++ * The follow actions will be taken: ++ * -# Determine the EP ++ * -# Set incomplete flag in dwc_ep structure ++ * -# Read any data from the FIFO ++ * -# Disable EP. When "Endpoint Disabled" interrupt is received ++ * re-enable EP. ++ */ ++int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t * pcd) ++{ ++ ++ gintsts_data_t gintsts; ++ ++#ifdef DWC_EN_ISOC ++ dwc_otg_dev_if_t *dev_if; ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dsts_data_t dsts = {.d32 = 0 }; ++ dwc_ep_t *dwc_ep; ++ int i; ++ ++ dev_if = GET_CORE_IF(pcd)->dev_if; ++ ++ for (i = 1; i <= dev_if->num_out_eps; ++i) { ++ dwc_ep = &pcd->in_ep[i].dwc_ep; ++ if (pcd->out_ep[i].dwc_ep.active && ++ pcd->out_ep[i].dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ deptsiz.d32 = ++ DWC_READ_REG32(&dev_if->out_ep_regs[i]->doeptsiz); ++ depctl.d32 = ++ DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl); ++ ++ if (depctl.b.epdis && deptsiz.d32) { ++ set_current_pkt_info(GET_CORE_IF(pcd), ++ &pcd->out_ep[i].dwc_ep); ++ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = ++ (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ ++ if (dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = ++ dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = ++ dwc_ep->dma_addr0; ++ } ++ ++ } ++ ++ dsts.d32 = ++ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if-> ++ dev_global_regs->dsts); ++ dwc_ep->next_frame = dsts.b.soffn; ++ ++ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF ++ (pcd), ++ dwc_ep); ++ } ++ } ++ } ++#else ++ /** @todo implement ISR */ ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ dwc_otg_core_if_t *core_if; ++ deptsiz_data_t deptsiz = {.d32 = 0 }; ++ depctl_data_t depctl = {.d32 = 0 }; ++ dctl_data_t dctl = {.d32 = 0 }; ++ dwc_ep_t *dwc_ep = NULL; ++ int i; ++ core_if = GET_CORE_IF(pcd); ++ ++ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { ++ dwc_ep = &pcd->out_ep[i].dwc_ep; ++ depctl.d32 = ++ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl); ++ if (depctl.b.epena && depctl.b.dpid == (core_if->frame_num & 0x1)) { ++ core_if->dev_if->isoc_ep = dwc_ep; ++ deptsiz.d32 = ++ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz); ++ break; ++ } ++ } ++ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); ++ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); ++ intr_mask.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); ++ ++ if (!intr_mask.b.goutnakeff) { ++ /* Unmask it */ ++ intr_mask.b.goutnakeff = 1; ++ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32); ++ } ++ if (!gintsts.b.goutnakeff) { ++ dctl.b.sgoutnak = 1; ++ } ++ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); ++ ++ depctl.d32 = DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl); ++ if (depctl.b.epena) { ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ } ++ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl, depctl.d32); ++ ++ intr_mask.d32 = 0; ++ intr_mask.b.incomplisoout = 1; ++ ++#endif /* DWC_EN_ISOC */ ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.incomplisoout = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This function handles the Global IN NAK Effective interrupt. ++ * ++ */ ++int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; ++ depctl_data_t diepctl = {.d32 = 0 }; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ int i; ++ ++ DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n"); ++ ++ /* Disable all active IN EPs */ ++ for (i = 0; i <= dev_if->num_in_eps; i++) { ++ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); ++ if (!(diepctl.b.eptype & 1) && diepctl.b.epena) { ++ if (core_if->start_predict > 0) ++ core_if->start_predict++; ++ diepctl.b.epdis = 1; ++ diepctl.b.snak = 1; ++ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, diepctl.d32); ++ } ++ } ++ ++ ++ /* Disable the Global IN NAK Effective Interrupt */ ++ intr_mask.b.ginnakeff = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.ginnakeff = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * OUT NAK Effective. ++ * ++ */ ++int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; ++ gintmsk_data_t intr_mask = {.d32 = 0 }; ++ gintsts_data_t gintsts; ++ depctl_data_t doepctl; ++ int i; ++ ++ /* Disable the Global OUT NAK Effective Interrupt */ ++ intr_mask.b.goutnakeff = 1; ++ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* If DEV OUT NAK enabled*/ ++ if (pcd->core_if->core_params->dev_out_nak) { ++ /* Run over all out endpoints to determine the ep number on ++ * which the timeout has happened ++ */ ++ for (i = 0; i <= dev_if->num_out_eps; i++) { ++ if ( pcd->core_if->ep_xfer_info[i].state == 2 ) ++ break; ++ } ++ if (i > dev_if->num_out_eps) { ++ dctl_data_t dctl; ++ dctl.d32 = ++ DWC_READ_REG32(&dev_if->dev_global_regs->dctl); ++ dctl.b.cgoutnak = 1; ++ DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl, ++ dctl.d32); ++ goto out; ++ } ++ ++ /* Disable the endpoint */ ++ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl); ++ if (doepctl.b.epena) { ++ doepctl.b.epdis = 1; ++ doepctl.b.snak = 1; ++ } ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32); ++ return 1; ++ } ++ /* We come here from Incomplete ISO OUT handler */ ++ if (dev_if->isoc_ep) { ++ dwc_ep_t *dwc_ep = (dwc_ep_t *)dev_if->isoc_ep; ++ uint32_t epnum = dwc_ep->num; ++ doepint_data_t doepint; ++ doepint.d32 = ++ DWC_READ_REG32(&dev_if->out_ep_regs[dwc_ep->num]->doepint); ++ dev_if->isoc_ep = NULL; ++ doepctl.d32 = ++ DWC_READ_REG32(&dev_if->out_ep_regs[epnum]->doepctl); ++ DWC_PRINTF("Before disable DOEPCTL = %08x\n", doepctl.d32); ++ if (doepctl.b.epena) { ++ doepctl.b.epdis = 1; ++ doepctl.b.snak = 1; ++ } ++ DWC_WRITE_REG32(&dev_if->out_ep_regs[epnum]->doepctl, ++ doepctl.d32); ++ return 1; ++ } else ++ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", ++ "Global OUT NAK Effective\n"); ++ ++out: ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.goutnakeff = 1; ++ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * PCD interrupt handler. ++ * ++ * The PCD handles the device interrupts. Many conditions can cause a ++ * device interrupt. When an interrupt occurs, the device interrupt ++ * service routine determines the cause of the interrupt and ++ * dispatches handling to the appropriate function. These interrupt ++ * handling functions are described below. ++ * ++ * All interrupt registers are processed from LSB to MSB. ++ * ++ */ ++int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++#ifdef VERBOSE ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++#endif ++ gintsts_data_t gintr_status; ++ int32_t retval = 0; ++ ++ /* Exit from ISR if core is hibernated */ ++ if (core_if->hibernation_suspend == 1) { ++ return retval; ++ } ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x gintmsk=%08x\n", ++ __func__, ++ DWC_READ_REG32(&global_regs->gintsts), ++ DWC_READ_REG32(&global_regs->gintmsk)); ++#endif ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ DWC_SPINLOCK(pcd->lock); ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x gintmsk=%08x\n", ++ __func__, ++ DWC_READ_REG32(&global_regs->gintsts), ++ DWC_READ_REG32(&global_regs->gintmsk)); ++#endif ++ ++ gintr_status.d32 = dwc_otg_read_core_intr(core_if); ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n", ++ __func__, gintr_status.d32); ++ ++ if (gintr_status.b.sofintr) { ++ retval |= dwc_otg_pcd_handle_sof_intr(pcd); ++ } ++ if (gintr_status.b.rxstsqlvl) { ++ retval |= ++ dwc_otg_pcd_handle_rx_status_q_level_intr(pcd); ++ } ++ if (gintr_status.b.nptxfempty) { ++ retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd); ++ } ++ if (gintr_status.b.goutnakeff) { ++ retval |= dwc_otg_pcd_handle_out_nak_effective(pcd); ++ } ++ if (gintr_status.b.i2cintr) { ++ retval |= dwc_otg_pcd_handle_i2c_intr(pcd); ++ } ++ if (gintr_status.b.erlysuspend) { ++ retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd); ++ } ++ if (gintr_status.b.usbreset) { ++ retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd); ++ } ++ if (gintr_status.b.enumdone) { ++ retval |= dwc_otg_pcd_handle_enum_done_intr(pcd); ++ } ++ if (gintr_status.b.isooutdrop) { ++ retval |= ++ dwc_otg_pcd_handle_isoc_out_packet_dropped_intr ++ (pcd); ++ } ++ if (gintr_status.b.eopframe) { ++ retval |= ++ dwc_otg_pcd_handle_end_periodic_frame_intr(pcd); ++ } ++ if (gintr_status.b.inepint) { ++ if (!core_if->multiproc_int_enable) { ++ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd); ++ } ++ } ++ if (gintr_status.b.outepintr) { ++ if (!core_if->multiproc_int_enable) { ++ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd); ++ } ++ } ++ if (gintr_status.b.epmismatch) { ++ retval |= dwc_otg_pcd_handle_ep_mismatch_intr(pcd); ++ } ++ if (gintr_status.b.fetsusp) { ++ retval |= dwc_otg_pcd_handle_ep_fetsusp_intr(pcd); ++ } ++ if (gintr_status.b.ginnakeff) { ++ retval |= dwc_otg_pcd_handle_in_nak_effective(pcd); ++ } ++ if (gintr_status.b.incomplisoin) { ++ retval |= ++ dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd); ++ } ++ if (gintr_status.b.incomplisoout) { ++ retval |= ++ dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd); ++ } ++ ++ /* In MPI mode Device Endpoints interrupts are asserted ++ * without setting outepintr and inepint bits set, so these ++ * Interrupt handlers are called without checking these bit-fields ++ */ ++ if (core_if->multiproc_int_enable) { ++ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd); ++ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd); ++ } ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__, ++ DWC_READ_REG32(&global_regs->gintsts)); ++#endif ++ DWC_SPINUNLOCK(pcd->lock); ++ } ++ return retval; ++} ++ ++#endif /* DWC_HOST_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c +@@ -0,0 +1,1280 @@ ++ /* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_linux.c $ ++ * $Revision: #21 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++ ++/** @file ++ * This file implements the Peripheral Controller Driver. ++ * ++ * The Peripheral Controller Driver (PCD) is responsible for ++ * translating requests from the Function Driver into the appropriate ++ * actions on the DWC_otg controller. It isolates the Function Driver ++ * from the specifics of the controller by providing an API to the ++ * Function Driver. ++ * ++ * The Peripheral Controller Driver for Linux will implement the ++ * Gadget API, so that the existing Gadget drivers can be used. ++ * (Gadget Driver is the Linux terminology for a Function Driver.) ++ * ++ * The Linux Gadget API is defined in the header file ++ * . The USB EP operations API is ++ * defined in the structure usb_ep_ops and the USB ++ * Controller API is defined in the structure ++ * usb_gadget_ops. ++ * ++ */ ++ ++#include "dwc_otg_os_dep.h" ++#include "dwc_otg_pcd_if.h" ++#include "dwc_otg_pcd.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_dbg.h" ++ ++extern bool fiq_enable; ++ ++static struct gadget_wrapper { ++ dwc_otg_pcd_t *pcd; ++ ++ struct usb_gadget gadget; ++ struct usb_gadget_driver *driver; ++ ++ struct usb_ep ep0; ++ struct usb_ep in_ep[16]; ++ struct usb_ep out_ep[16]; ++ ++} *gadget_wrapper; ++ ++/* Display the contents of the buffer */ ++extern void dump_msg(const u8 * buf, unsigned int length); ++/** ++ * Get the dwc_otg_pcd_ep_t* from usb_ep* pointer - NULL in case ++ * if the endpoint is not found ++ */ ++static struct dwc_otg_pcd_ep *ep_from_handle(dwc_otg_pcd_t * pcd, void *handle) ++{ ++ int i; ++ if (pcd->ep0.priv == handle) { ++ return &pcd->ep0; ++ } ++ ++ for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) { ++ if (pcd->in_ep[i].priv == handle) ++ return &pcd->in_ep[i]; ++ if (pcd->out_ep[i].priv == handle) ++ return &pcd->out_ep[i]; ++ } ++ ++ return NULL; ++} ++ ++/* USB Endpoint Operations */ ++/* ++ * The following sections briefly describe the behavior of the Gadget ++ * API endpoint operations implemented in the DWC_otg driver ++ * software. Detailed descriptions of the generic behavior of each of ++ * these functions can be found in the Linux header file ++ * include/linux/usb_gadget.h. ++ * ++ * The Gadget API provides wrapper functions for each of the function ++ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper ++ * function, which then calls the underlying PCD function. The ++ * following sections are named according to the wrapper ++ * functions. Within each section, the corresponding DWC_otg PCD ++ * function name is specified. ++ * ++ */ ++ ++/** ++ * This function is called by the Gadget Driver for each EP to be ++ * configured for the current configuration (SET_CONFIGURATION). ++ * ++ * This function initializes the dwc_otg_ep_t data structure, and then ++ * calls dwc_otg_ep_activate. ++ */ ++static int ep_enable(struct usb_ep *usb_ep, ++ const struct usb_endpoint_descriptor *ep_desc) ++{ ++ int retval; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, ep_desc); ++ ++ if (!usb_ep || !ep_desc || ep_desc->bDescriptorType != USB_DT_ENDPOINT) { ++ DWC_WARN("%s, bad ep or descriptor\n", __func__); ++ return -EINVAL; ++ } ++ if (usb_ep == &gadget_wrapper->ep0) { ++ DWC_WARN("%s, bad ep(0)\n", __func__); ++ return -EINVAL; ++ } ++ ++ /* Check FIFO size? */ ++ if (!ep_desc->wMaxPacketSize) { ++ DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name); ++ return -ERANGE; ++ } ++ ++ if (!gadget_wrapper->driver || ++ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_WARN("%s, bogus device state\n", __func__); ++ return -ESHUTDOWN; ++ } ++ ++ /* Delete after check - MAS */ ++#if 0 ++ nat = (uint32_t) ep_desc->wMaxPacketSize; ++ printk(KERN_ALERT "%s: nat (before) =%d\n", __func__, nat); ++ nat = (nat >> 11) & 0x03; ++ printk(KERN_ALERT "%s: nat (after) =%d\n", __func__, nat); ++#endif ++ retval = dwc_otg_pcd_ep_enable(gadget_wrapper->pcd, ++ (const uint8_t *)ep_desc, ++ (void *)usb_ep); ++ if (retval) { ++ DWC_WARN("dwc_otg_pcd_ep_enable failed\n"); ++ return -EINVAL; ++ } ++ ++ usb_ep->maxpacket = le16_to_cpu(ep_desc->wMaxPacketSize); ++ ++ return 0; ++} ++ ++/** ++ * This function is called when an EP is disabled due to disconnect or ++ * change in configuration. Any pending requests will terminate with a ++ * status of -ESHUTDOWN. ++ * ++ * This function modifies the dwc_otg_ep_t data structure for this EP, ++ * and then calls dwc_otg_ep_deactivate. ++ */ ++static int ep_disable(struct usb_ep *usb_ep) ++{ ++ int retval; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, usb_ep); ++ if (!usb_ep) { ++ DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__, ++ usb_ep ? usb_ep->name : NULL); ++ return -EINVAL; ++ } ++ ++ retval = dwc_otg_pcd_ep_disable(gadget_wrapper->pcd, usb_ep); ++ if (retval) { ++ retval = -EINVAL; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function allocates a request object to use with the specified ++ * endpoint. ++ * ++ * @param ep The endpoint to be used with with the request ++ * @param gfp_flags the GFP_* flags to use. ++ */ ++static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep, ++ gfp_t gfp_flags) ++{ ++ struct usb_request *usb_req; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d)\n", __func__, ep, gfp_flags); ++ if (0 == ep) { ++ DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n"); ++ return 0; ++ } ++ usb_req = kzalloc(sizeof(*usb_req), gfp_flags); ++ if (0 == usb_req) { ++ DWC_WARN("%s() %s\n", __func__, "request allocation failed!\n"); ++ return 0; ++ } ++ usb_req->dma = DWC_DMA_ADDR_INVALID; ++ ++ return usb_req; ++} ++ ++/** ++ * This function frees a request object. ++ * ++ * @param ep The endpoint associated with the request ++ * @param req The request being freed ++ */ ++static void dwc_otg_pcd_free_request(struct usb_ep *ep, struct usb_request *req) ++{ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, ep, req); ++ ++ if (0 == ep || 0 == req) { ++ DWC_WARN("%s() %s\n", __func__, ++ "Invalid ep or req argument!\n"); ++ return; ++ } ++ ++ kfree(req); ++} ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++/** ++ * This function allocates an I/O buffer to be used for a transfer ++ * to/from the specified endpoint. ++ * ++ * @param usb_ep The endpoint to be used with with the request ++ * @param bytes The desired number of bytes for the buffer ++ * @param dma Pointer to the buffer's DMA address; must be valid ++ * @param gfp_flags the GFP_* flags to use. ++ * @return address of a new buffer or null is buffer could not be allocated. ++ */ ++static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes, ++ dma_addr_t * dma, gfp_t gfp_flags) ++{ ++ void *buf; ++ dwc_otg_pcd_t *pcd = 0; ++ ++ pcd = gadget_wrapper->pcd; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes, ++ dma, gfp_flags); ++ ++ /* Check dword alignment */ ++ if ((bytes & 0x3UL) != 0) { ++ DWC_WARN("%s() Buffer size is not a multiple of" ++ "DWORD size (%d)", __func__, bytes); ++ } ++ ++ buf = dma_alloc_coherent(NULL, bytes, dma, gfp_flags); ++ WARN_ON(!buf); ++ ++ /* Check dword alignment */ ++ if (((int)buf & 0x3UL) != 0) { ++ DWC_WARN("%s() Buffer is not DWORD aligned (%p)", ++ __func__, buf); ++ } ++ ++ return buf; ++} ++ ++/** ++ * This function frees an I/O buffer that was allocated by alloc_buffer. ++ * ++ * @param usb_ep the endpoint associated with the buffer ++ * @param buf address of the buffer ++ * @param dma The buffer's DMA address ++ * @param bytes The number of bytes of the buffer ++ */ ++static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf, ++ dma_addr_t dma, unsigned bytes) ++{ ++ dwc_otg_pcd_t *pcd = 0; ++ ++ pcd = gadget_wrapper->pcd; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%0x,%d)\n", __func__, buf, dma, bytes); ++ ++ dma_free_coherent(NULL, bytes, buf, dma); ++} ++#endif ++ ++/** ++ * This function is used to submit an I/O Request to an EP. ++ * ++ * - When the request completes the request's completion callback ++ * is called to return the request to the driver. ++ * - An EP, except control EPs, may have multiple requests ++ * pending. ++ * - Once submitted the request cannot be examined or modified. ++ * - Each request is turned into one or more packets. ++ * - A BULK EP can queue any amount of data; the transfer is ++ * packetized. ++ * - Zero length Packets are specified with the request 'zero' ++ * flag. ++ */ ++static int ep_queue(struct usb_ep *usb_ep, struct usb_request *usb_req, ++ gfp_t gfp_flags) ++{ ++ dwc_otg_pcd_t *pcd; ++ struct dwc_otg_pcd_ep *ep = NULL; ++ int retval = 0, is_isoc_ep = 0; ++ dma_addr_t dma_addr = DWC_DMA_ADDR_INVALID; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p,%d)\n", ++ __func__, usb_ep, usb_req, gfp_flags); ++ ++ if (!usb_req || !usb_req->complete || !usb_req->buf) { ++ DWC_WARN("bad params\n"); ++ return -EINVAL; ++ } ++ ++ if (!usb_ep) { ++ DWC_WARN("bad ep\n"); ++ return -EINVAL; ++ } ++ ++ pcd = gadget_wrapper->pcd; ++ if (!gadget_wrapper->driver || ++ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", ++ gadget_wrapper->gadget.speed); ++ DWC_WARN("bogus device state\n"); ++ return -ESHUTDOWN; ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n", ++ usb_ep->name, usb_req, usb_req->length, usb_req->buf); ++ ++ usb_req->status = -EINPROGRESS; ++ usb_req->actual = 0; ++ ++ ep = ep_from_handle(pcd, usb_ep); ++ if (ep == NULL) ++ is_isoc_ep = 0; ++ else ++ is_isoc_ep = (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) ? 1 : 0; ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ dma_addr = usb_req->dma; ++#else ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev; ++ struct device *dev = NULL; ++ ++ if (otg_dev != NULL) ++ dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep); ++ ++ if (usb_req->length != 0 && ++ usb_req->dma == DWC_DMA_ADDR_INVALID) { ++ dma_addr = dma_map_single(dev, usb_req->buf, ++ usb_req->length, ++ ep->dwc_ep.is_in ? ++ DMA_TO_DEVICE: ++ DMA_FROM_DEVICE); ++ } ++ } ++#endif ++ ++#ifdef DWC_UTE_PER_IO ++ if (is_isoc_ep == 1) { ++ retval = dwc_otg_pcd_xiso_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr, ++ usb_req->length, usb_req->zero, usb_req, ++ gfp_flags == GFP_ATOMIC ? 1 : 0, &usb_req->ext_req); ++ if (retval) ++ return -EINVAL; ++ ++ return 0; ++ } ++#endif ++ retval = dwc_otg_pcd_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr, ++ usb_req->length, usb_req->zero, usb_req, ++ gfp_flags == GFP_ATOMIC ? 1 : 0); ++ if (retval) { ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * This function cancels an I/O request from an EP. ++ */ ++static int ep_dequeue(struct usb_ep *usb_ep, struct usb_request *usb_req) ++{ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, usb_req); ++ ++ if (!usb_ep || !usb_req) { ++ DWC_WARN("bad argument\n"); ++ return -EINVAL; ++ } ++ if (!gadget_wrapper->driver || ++ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_WARN("bogus device state\n"); ++ return -ESHUTDOWN; ++ } ++ if (dwc_otg_pcd_ep_dequeue(gadget_wrapper->pcd, usb_ep, usb_req)) { ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * usb_ep_set_halt stalls an endpoint. ++ * ++ * usb_ep_clear_halt clears an endpoint halt and resets its data ++ * toggle. ++ * ++ * Both of these functions are implemented with the same underlying ++ * function. The behavior depends on the value argument. ++ * ++ * @param[in] usb_ep the Endpoint to halt or clear halt. ++ * @param[in] value ++ * - 0 means clear_halt. ++ * - 1 means set_halt, ++ * - 2 means clear stall lock flag. ++ * - 3 means set stall lock flag. ++ */ ++static int ep_halt(struct usb_ep *usb_ep, int value) ++{ ++ int retval = 0; ++ ++ DWC_DEBUGPL(DBG_PCD, "HALT %s %d\n", usb_ep->name, value); ++ ++ if (!usb_ep) { ++ DWC_WARN("bad ep\n"); ++ return -EINVAL; ++ } ++ ++ retval = dwc_otg_pcd_ep_halt(gadget_wrapper->pcd, usb_ep, value); ++ if (retval == -DWC_E_AGAIN) { ++ return -EAGAIN; ++ } else if (retval) { ++ retval = -EINVAL; ++ } ++ ++ return retval; ++} ++ ++//#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)) ++#if 0 ++/** ++ * ep_wedge: sets the halt feature and ignores clear requests ++ * ++ * @usb_ep: the endpoint being wedged ++ * ++ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT) ++ * requests. If the gadget driver clears the halt status, it will ++ * automatically unwedge the endpoint. ++ * ++ * Returns zero on success, else negative errno. * ++ * Check usb_ep_set_wedge() at "usb_gadget.h" for details ++ */ ++static int ep_wedge(struct usb_ep *usb_ep) ++{ ++ int retval = 0; ++ ++ DWC_DEBUGPL(DBG_PCD, "WEDGE %s\n", usb_ep->name); ++ ++ if (!usb_ep) { ++ DWC_WARN("bad ep\n"); ++ return -EINVAL; ++ } ++ ++ retval = dwc_otg_pcd_ep_wedge(gadget_wrapper->pcd, usb_ep); ++ if (retval == -DWC_E_AGAIN) { ++ retval = -EAGAIN; ++ } else if (retval) { ++ retval = -EINVAL; ++ } ++ ++ return retval; ++} ++#endif ++ ++#ifdef DWC_EN_ISOC ++/** ++ * This function is used to submit an ISOC Transfer Request to an EP. ++ * ++ * - Every time a sync period completes the request's completion callback ++ * is called to provide data to the gadget driver. ++ * - Once submitted the request cannot be modified. ++ * - Each request is turned into periodic data packets untill ISO ++ * Transfer is stopped.. ++ */ ++static int iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req, ++ gfp_t gfp_flags) ++{ ++ int retval = 0; ++ ++ if (!req || !req->process_buffer || !req->buf0 || !req->buf1) { ++ DWC_WARN("bad params\n"); ++ return -EINVAL; ++ } ++ ++ if (!usb_ep) { ++ DWC_PRINTF("bad params\n"); ++ return -EINVAL; ++ } ++ ++ req->status = -EINPROGRESS; ++ ++ retval = ++ dwc_otg_pcd_iso_ep_start(gadget_wrapper->pcd, usb_ep, req->buf0, ++ req->buf1, req->dma0, req->dma1, ++ req->sync_frame, req->data_pattern_frame, ++ req->data_per_frame, ++ req-> ++ flags & USB_REQ_ISO_ASAP ? -1 : ++ req->start_frame, req->buf_proc_intrvl, ++ req, gfp_flags == GFP_ATOMIC ? 1 : 0); ++ ++ if (retval) { ++ return -EINVAL; ++ } ++ ++ return retval; ++} ++ ++/** ++ * This function stops ISO EP Periodic Data Transfer. ++ */ ++static int iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req) ++{ ++ int retval = 0; ++ if (!usb_ep) { ++ DWC_WARN("bad ep\n"); ++ } ++ ++ if (!gadget_wrapper->driver || ++ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", ++ gadget_wrapper->gadget.speed); ++ DWC_WARN("bogus device state\n"); ++ } ++ ++ dwc_otg_pcd_iso_ep_stop(gadget_wrapper->pcd, usb_ep, req); ++ if (retval) { ++ retval = -EINVAL; ++ } ++ ++ return retval; ++} ++ ++static struct usb_iso_request *alloc_iso_request(struct usb_ep *ep, ++ int packets, gfp_t gfp_flags) ++{ ++ struct usb_iso_request *pReq = NULL; ++ uint32_t req_size; ++ ++ req_size = sizeof(struct usb_iso_request); ++ req_size += ++ (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor))); ++ ++ pReq = kmalloc(req_size, gfp_flags); ++ if (!pReq) { ++ DWC_WARN("Can't allocate Iso Request\n"); ++ return 0; ++ } ++ pReq->iso_packet_desc0 = (void *)(pReq + 1); ++ ++ pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets; ++ ++ return pReq; ++} ++ ++static void free_iso_request(struct usb_ep *ep, struct usb_iso_request *req) ++{ ++ kfree(req); ++} ++ ++static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops = { ++ .ep_ops = { ++ .enable = ep_enable, ++ .disable = ep_disable, ++ ++ .alloc_request = dwc_otg_pcd_alloc_request, ++ .free_request = dwc_otg_pcd_free_request, ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ .alloc_buffer = dwc_otg_pcd_alloc_buffer, ++ .free_buffer = dwc_otg_pcd_free_buffer, ++#endif ++ ++ .queue = ep_queue, ++ .dequeue = ep_dequeue, ++ ++ .set_halt = ep_halt, ++ .fifo_status = 0, ++ .fifo_flush = 0, ++ }, ++ .iso_ep_start = iso_ep_start, ++ .iso_ep_stop = iso_ep_stop, ++ .alloc_iso_request = alloc_iso_request, ++ .free_iso_request = free_iso_request, ++}; ++ ++#else ++ ++ int (*enable) (struct usb_ep *ep, ++ const struct usb_endpoint_descriptor *desc); ++ int (*disable) (struct usb_ep *ep); ++ ++ struct usb_request *(*alloc_request) (struct usb_ep *ep, ++ gfp_t gfp_flags); ++ void (*free_request) (struct usb_ep *ep, struct usb_request *req); ++ ++ int (*queue) (struct usb_ep *ep, struct usb_request *req, ++ gfp_t gfp_flags); ++ int (*dequeue) (struct usb_ep *ep, struct usb_request *req); ++ ++ int (*set_halt) (struct usb_ep *ep, int value); ++ int (*set_wedge) (struct usb_ep *ep); ++ ++ int (*fifo_status) (struct usb_ep *ep); ++ void (*fifo_flush) (struct usb_ep *ep); ++static struct usb_ep_ops dwc_otg_pcd_ep_ops = { ++ .enable = ep_enable, ++ .disable = ep_disable, ++ ++ .alloc_request = dwc_otg_pcd_alloc_request, ++ .free_request = dwc_otg_pcd_free_request, ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ++ .alloc_buffer = dwc_otg_pcd_alloc_buffer, ++ .free_buffer = dwc_otg_pcd_free_buffer, ++#else ++ /* .set_wedge = ep_wedge, */ ++ .set_wedge = NULL, /* uses set_halt instead */ ++#endif ++ ++ .queue = ep_queue, ++ .dequeue = ep_dequeue, ++ ++ .set_halt = ep_halt, ++ .fifo_status = 0, ++ .fifo_flush = 0, ++ ++}; ++ ++#endif /* _EN_ISOC_ */ ++/* Gadget Operations */ ++/** ++ * The following gadget operations will be implemented in the DWC_otg ++ * PCD. Functions in the API that are not described below are not ++ * implemented. ++ * ++ * The Gadget API provides wrapper functions for each of the function ++ * pointers defined in usb_gadget_ops. The Gadget Driver calls the ++ * wrapper function, which then calls the underlying PCD function. The ++ * following sections are named according to the wrapper functions ++ * (except for ioctl, which doesn't have a wrapper function). Within ++ * each section, the corresponding DWC_otg PCD function name is ++ * specified. ++ * ++ */ ++ ++/** ++ *Gets the USB Frame number of the last SOF. ++ */ ++static int get_frame_number(struct usb_gadget *gadget) ++{ ++ struct gadget_wrapper *d; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget); ++ ++ if (gadget == 0) { ++ return -ENODEV; ++ } ++ ++ d = container_of(gadget, struct gadget_wrapper, gadget); ++ return dwc_otg_pcd_get_frame_number(d->pcd); ++} ++ ++#ifdef CONFIG_USB_DWC_OTG_LPM ++static int test_lpm_enabled(struct usb_gadget *gadget) ++{ ++ struct gadget_wrapper *d; ++ ++ d = container_of(gadget, struct gadget_wrapper, gadget); ++ ++ return dwc_otg_pcd_is_lpm_enabled(d->pcd); ++} ++#endif ++ ++/** ++ * Initiates Session Request Protocol (SRP) to wakeup the host if no ++ * session is in progress. If a session is already in progress, but ++ * the device is suspended, remote wakeup signaling is started. ++ * ++ */ ++static int wakeup(struct usb_gadget *gadget) ++{ ++ struct gadget_wrapper *d; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget); ++ ++ if (gadget == 0) { ++ return -ENODEV; ++ } else { ++ d = container_of(gadget, struct gadget_wrapper, gadget); ++ } ++ dwc_otg_pcd_wakeup(d->pcd); ++ return 0; ++} ++ ++static const struct usb_gadget_ops dwc_otg_pcd_ops = { ++ .get_frame = get_frame_number, ++ .wakeup = wakeup, ++#ifdef CONFIG_USB_DWC_OTG_LPM ++ .lpm_support = test_lpm_enabled, ++#endif ++ // current versions must always be self-powered ++}; ++ ++static int _setup(dwc_otg_pcd_t * pcd, uint8_t * bytes) ++{ ++ int retval = -DWC_E_NOT_SUPPORTED; ++ if (gadget_wrapper->driver && gadget_wrapper->driver->setup) { ++ retval = gadget_wrapper->driver->setup(&gadget_wrapper->gadget, ++ (struct usb_ctrlrequest ++ *)bytes); ++ } ++ ++ if (retval == -ENOTSUPP) { ++ retval = -DWC_E_NOT_SUPPORTED; ++ } else if (retval < 0) { ++ retval = -DWC_E_INVALID; ++ } ++ ++ return retval; ++} ++ ++#ifdef DWC_EN_ISOC ++static int _isoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int proc_buf_num) ++{ ++ int i, packet_count; ++ struct usb_gadget_iso_packet_descriptor *iso_packet = 0; ++ struct usb_iso_request *iso_req = req_handle; ++ ++ if (proc_buf_num) { ++ iso_packet = iso_req->iso_packet_desc1; ++ } else { ++ iso_packet = iso_req->iso_packet_desc0; ++ } ++ packet_count = ++ dwc_otg_pcd_get_iso_packet_count(pcd, ep_handle, req_handle); ++ for (i = 0; i < packet_count; ++i) { ++ int status; ++ int actual; ++ int offset; ++ dwc_otg_pcd_get_iso_packet_params(pcd, ep_handle, req_handle, ++ i, &status, &actual, &offset); ++ switch (status) { ++ case -DWC_E_NO_DATA: ++ status = -ENODATA; ++ break; ++ default: ++ if (status) { ++ DWC_PRINTF("unknown status in isoc packet\n"); ++ } ++ ++ } ++ iso_packet[i].status = status; ++ iso_packet[i].offset = offset; ++ iso_packet[i].actual_length = actual; ++ } ++ ++ iso_req->status = 0; ++ iso_req->process_buffer(ep_handle, iso_req); ++ ++ return 0; ++} ++#endif /* DWC_EN_ISOC */ ++ ++#ifdef DWC_UTE_PER_IO ++/** ++ * Copy the contents of the extended request to the Linux usb_request's ++ * extended part and call the gadget's completion. ++ * ++ * @param pcd Pointer to the pcd structure ++ * @param ep_handle Void pointer to the usb_ep structure ++ * @param req_handle Void pointer to the usb_request structure ++ * @param status Request status returned from the portable logic ++ * @param ereq_port Void pointer to the extended request structure ++ * created in the the portable part that contains the ++ * results of the processed iso packets. ++ */ ++static int _xisoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int32_t status, void *ereq_port) ++{ ++ struct dwc_ute_iso_req_ext *ereqorg = NULL; ++ struct dwc_iso_xreq_port *ereqport = NULL; ++ struct dwc_ute_iso_packet_descriptor *desc_org = NULL; ++ int i; ++ struct usb_request *req; ++ //struct dwc_ute_iso_packet_descriptor * ++ //int status = 0; ++ ++ req = (struct usb_request *)req_handle; ++ ereqorg = &req->ext_req; ++ ereqport = (struct dwc_iso_xreq_port *)ereq_port; ++ desc_org = ereqorg->per_io_frame_descs; ++ ++ if (req && req->complete) { ++ /* Copy the request data from the portable logic to our request */ ++ for (i = 0; i < ereqport->pio_pkt_count; i++) { ++ desc_org[i].actual_length = ++ ereqport->per_io_frame_descs[i].actual_length; ++ desc_org[i].status = ++ ereqport->per_io_frame_descs[i].status; ++ } ++ ++ switch (status) { ++ case -DWC_E_SHUTDOWN: ++ req->status = -ESHUTDOWN; ++ break; ++ case -DWC_E_RESTART: ++ req->status = -ECONNRESET; ++ break; ++ case -DWC_E_INVALID: ++ req->status = -EINVAL; ++ break; ++ case -DWC_E_TIMEOUT: ++ req->status = -ETIMEDOUT; ++ break; ++ default: ++ req->status = status; ++ } ++ ++ /* And call the gadget's completion */ ++ req->complete(ep_handle, req); ++ } ++ ++ return 0; ++} ++#endif /* DWC_UTE_PER_IO */ ++ ++static int _complete(dwc_otg_pcd_t * pcd, void *ep_handle, ++ void *req_handle, int32_t status, uint32_t actual) ++{ ++ struct usb_request *req = (struct usb_request *)req_handle; ++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27) ++ struct dwc_otg_pcd_ep *ep = NULL; ++#endif ++ ++ if (req && req->complete) { ++ switch (status) { ++ case -DWC_E_SHUTDOWN: ++ req->status = -ESHUTDOWN; ++ break; ++ case -DWC_E_RESTART: ++ req->status = -ECONNRESET; ++ break; ++ case -DWC_E_INVALID: ++ req->status = -EINVAL; ++ break; ++ case -DWC_E_TIMEOUT: ++ req->status = -ETIMEDOUT; ++ break; ++ default: ++ req->status = status; ++ ++ } ++ ++ req->actual = actual; ++ DWC_SPINUNLOCK(pcd->lock); ++ req->complete(ep_handle, req); ++ DWC_SPINLOCK(pcd->lock); ++ } ++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27) ++ ep = ep_from_handle(pcd, ep_handle); ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ if (req->length != 0) { ++ dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev; ++ struct device *dev = NULL; ++ ++ if (otg_dev != NULL) ++ dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep); ++ ++ dma_unmap_single(dev, req->dma, req->length, ++ ep->dwc_ep.is_in ? ++ DMA_TO_DEVICE: DMA_FROM_DEVICE); ++ } ++ } ++#endif ++ ++ return 0; ++} ++ ++static int _connect(dwc_otg_pcd_t * pcd, int speed) ++{ ++ gadget_wrapper->gadget.speed = speed; ++ return 0; ++} ++ ++static int _disconnect(dwc_otg_pcd_t * pcd) ++{ ++ if (gadget_wrapper->driver && gadget_wrapper->driver->disconnect) { ++ gadget_wrapper->driver->disconnect(&gadget_wrapper->gadget); ++ } ++ return 0; ++} ++ ++static int _resume(dwc_otg_pcd_t * pcd) ++{ ++ if (gadget_wrapper->driver && gadget_wrapper->driver->resume) { ++ gadget_wrapper->driver->resume(&gadget_wrapper->gadget); ++ } ++ ++ return 0; ++} ++ ++static int _suspend(dwc_otg_pcd_t * pcd) ++{ ++ if (gadget_wrapper->driver && gadget_wrapper->driver->suspend) { ++ gadget_wrapper->driver->suspend(&gadget_wrapper->gadget); ++ } ++ return 0; ++} ++ ++/** ++ * This function updates the otg values in the gadget structure. ++ */ ++static int _hnp_changed(dwc_otg_pcd_t * pcd) ++{ ++ ++ if (!gadget_wrapper->gadget.is_otg) ++ return 0; ++ ++ gadget_wrapper->gadget.b_hnp_enable = get_b_hnp_enable(pcd); ++ gadget_wrapper->gadget.a_hnp_support = get_a_hnp_support(pcd); ++ gadget_wrapper->gadget.a_alt_hnp_support = get_a_alt_hnp_support(pcd); ++ return 0; ++} ++ ++static int _reset(dwc_otg_pcd_t * pcd) ++{ ++ return 0; ++} ++ ++#ifdef DWC_UTE_CFI ++static int _cfi_setup(dwc_otg_pcd_t * pcd, void *cfi_req) ++{ ++ int retval = -DWC_E_INVALID; ++ if (gadget_wrapper->driver->cfi_feature_setup) { ++ retval = ++ gadget_wrapper->driver-> ++ cfi_feature_setup(&gadget_wrapper->gadget, ++ (struct cfi_usb_ctrlrequest *)cfi_req); ++ } ++ ++ return retval; ++} ++#endif ++ ++static const struct dwc_otg_pcd_function_ops fops = { ++ .complete = _complete, ++#ifdef DWC_EN_ISOC ++ .isoc_complete = _isoc_complete, ++#endif ++ .setup = _setup, ++ .disconnect = _disconnect, ++ .connect = _connect, ++ .resume = _resume, ++ .suspend = _suspend, ++ .hnp_changed = _hnp_changed, ++ .reset = _reset, ++#ifdef DWC_UTE_CFI ++ .cfi_setup = _cfi_setup, ++#endif ++#ifdef DWC_UTE_PER_IO ++ .xisoc_complete = _xisoc_complete, ++#endif ++}; ++ ++/** ++ * This function is the top level PCD interrupt handler. ++ */ ++static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev) ++{ ++ dwc_otg_pcd_t *pcd = dev; ++ int32_t retval = IRQ_NONE; ++ ++ retval = dwc_otg_pcd_handle_intr(pcd); ++ if (retval != 0) { ++ S3C2410X_CLEAR_EINTPEND(); ++ } ++ return IRQ_RETVAL(retval); ++} ++ ++/** ++ * This function initialized the usb_ep structures to there default ++ * state. ++ * ++ * @param d Pointer on gadget_wrapper. ++ */ ++void gadget_add_eps(struct gadget_wrapper *d) ++{ ++ static const char *names[] = { ++ ++ "ep0", ++ "ep1in", ++ "ep2in", ++ "ep3in", ++ "ep4in", ++ "ep5in", ++ "ep6in", ++ "ep7in", ++ "ep8in", ++ "ep9in", ++ "ep10in", ++ "ep11in", ++ "ep12in", ++ "ep13in", ++ "ep14in", ++ "ep15in", ++ "ep1out", ++ "ep2out", ++ "ep3out", ++ "ep4out", ++ "ep5out", ++ "ep6out", ++ "ep7out", ++ "ep8out", ++ "ep9out", ++ "ep10out", ++ "ep11out", ++ "ep12out", ++ "ep13out", ++ "ep14out", ++ "ep15out" ++ }; ++ ++ int i; ++ struct usb_ep *ep; ++ int8_t dev_endpoints; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s\n", __func__); ++ ++ INIT_LIST_HEAD(&d->gadget.ep_list); ++ d->gadget.ep0 = &d->ep0; ++ d->gadget.speed = USB_SPEED_UNKNOWN; ++ ++ INIT_LIST_HEAD(&d->gadget.ep0->ep_list); ++ ++ /** ++ * Initialize the EP0 structure. ++ */ ++ ep = &d->ep0; ++ ++ /* Init the usb_ep structure. */ ++ ep->name = names[0]; ++ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; ++ ++ /** ++ * @todo NGS: What should the max packet size be set to ++ * here? Before EP type is set? ++ */ ++ ep->maxpacket = MAX_PACKET_SIZE; ++ dwc_otg_pcd_ep_enable(d->pcd, NULL, ep); ++ ++ list_add_tail(&ep->ep_list, &d->gadget.ep_list); ++ ++ /** ++ * Initialize the EP structures. ++ */ ++ dev_endpoints = d->pcd->core_if->dev_if->num_in_eps; ++ ++ for (i = 0; i < dev_endpoints; i++) { ++ ep = &d->in_ep[i]; ++ ++ /* Init the usb_ep structure. */ ++ ep->name = names[d->pcd->in_ep[i].dwc_ep.num]; ++ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; ++ ++ /** ++ * @todo NGS: What should the max packet size be set to ++ * here? Before EP type is set? ++ */ ++ ep->maxpacket = MAX_PACKET_SIZE; ++ list_add_tail(&ep->ep_list, &d->gadget.ep_list); ++ } ++ ++ dev_endpoints = d->pcd->core_if->dev_if->num_out_eps; ++ ++ for (i = 0; i < dev_endpoints; i++) { ++ ep = &d->out_ep[i]; ++ ++ /* Init the usb_ep structure. */ ++ ep->name = names[15 + d->pcd->out_ep[i].dwc_ep.num]; ++ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; ++ ++ /** ++ * @todo NGS: What should the max packet size be set to ++ * here? Before EP type is set? ++ */ ++ ep->maxpacket = MAX_PACKET_SIZE; ++ ++ list_add_tail(&ep->ep_list, &d->gadget.ep_list); ++ } ++ ++ /* remove ep0 from the list. There is a ep0 pointer. */ ++ list_del_init(&d->ep0.ep_list); ++ ++ d->ep0.maxpacket = MAX_EP0_SIZE; ++} ++ ++/** ++ * This function releases the Gadget device. ++ * required by device_unregister(). ++ * ++ * @todo Should this do something? Should it free the PCD? ++ */ ++static void dwc_otg_pcd_gadget_release(struct device *dev) ++{ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, dev); ++} ++ ++static struct gadget_wrapper *alloc_wrapper(dwc_bus_dev_t *_dev) ++{ ++ static char pcd_name[] = "dwc_otg_pcd"; ++ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); ++ struct gadget_wrapper *d; ++ int retval; ++ ++ d = DWC_ALLOC(sizeof(*d)); ++ if (d == NULL) { ++ return NULL; ++ } ++ ++ memset(d, 0, sizeof(*d)); ++ ++ d->gadget.name = pcd_name; ++ d->pcd = otg_dev->pcd; ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ++ strcpy(d->gadget.dev.bus_id, "gadget"); ++#else ++ dev_set_name(&d->gadget.dev, "%s", "gadget"); ++#endif ++ ++ d->gadget.dev.parent = &_dev->dev; ++ d->gadget.dev.release = dwc_otg_pcd_gadget_release; ++ d->gadget.ops = &dwc_otg_pcd_ops; ++ d->gadget.max_speed = dwc_otg_pcd_is_dualspeed(otg_dev->pcd) ? USB_SPEED_HIGH:USB_SPEED_FULL; ++ d->gadget.is_otg = dwc_otg_pcd_is_otg(otg_dev->pcd); ++ ++ d->driver = 0; ++ /* Register the gadget device */ ++ retval = device_register(&d->gadget.dev); ++ if (retval != 0) { ++ DWC_ERROR("device_register failed\n"); ++ DWC_FREE(d); ++ return NULL; ++ } ++ ++ return d; ++} ++ ++static void free_wrapper(struct gadget_wrapper *d) ++{ ++ if (d->driver) { ++ /* should have been done already by driver model core */ ++ DWC_WARN("driver '%s' is still registered\n", ++ d->driver->driver.name); ++#ifdef CONFIG_USB_GADGET ++ usb_gadget_unregister_driver(d->driver); ++#endif ++ } ++ ++ device_unregister(&d->gadget.dev); ++ DWC_FREE(d); ++} ++ ++/** ++ * This function initialized the PCD portion of the driver. ++ * ++ */ ++int pcd_init(dwc_bus_dev_t *_dev) ++{ ++ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); ++ int retval = 0; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev=%p\n", __func__, _dev, otg_dev); ++ ++ otg_dev->pcd = dwc_otg_pcd_init(otg_dev); ++ ++ if (!otg_dev->pcd) { ++ DWC_ERROR("dwc_otg_pcd_init failed\n"); ++ return -ENOMEM; ++ } ++ ++ otg_dev->pcd->otg_dev = otg_dev; ++ gadget_wrapper = alloc_wrapper(_dev); ++ ++ /* ++ * Initialize EP structures ++ */ ++ gadget_add_eps(gadget_wrapper); ++ /* ++ * Setup interupt handler ++ */ ++#ifdef PLATFORM_INTERFACE ++ DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", ++ platform_get_irq(_dev, fiq_enable ? 0 : 1)); ++ retval = request_irq(platform_get_irq(_dev, fiq_enable ? 0 : 1), dwc_otg_pcd_irq, ++ IRQF_SHARED, gadget_wrapper->gadget.name, ++ otg_dev->pcd); ++ if (retval != 0) { ++ DWC_ERROR("request of irq%d failed\n", ++ platform_get_irq(_dev, fiq_enable ? 0 : 1)); ++ free_wrapper(gadget_wrapper); ++ return -EBUSY; ++ } ++#else ++ DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", ++ _dev->irq); ++ retval = request_irq(_dev->irq, dwc_otg_pcd_irq, ++ IRQF_SHARED | IRQF_DISABLED, ++ gadget_wrapper->gadget.name, otg_dev->pcd); ++ if (retval != 0) { ++ DWC_ERROR("request of irq%d failed\n", _dev->irq); ++ free_wrapper(gadget_wrapper); ++ return -EBUSY; ++ } ++#endif ++ ++ dwc_otg_pcd_start(gadget_wrapper->pcd, &fops); ++ ++ return retval; ++} ++ ++/** ++ * Cleanup the PCD. ++ */ ++void pcd_remove(dwc_bus_dev_t *_dev) ++{ ++ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); ++ dwc_otg_pcd_t *pcd = otg_dev->pcd; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev); ++ ++ /* ++ * Free the IRQ ++ */ ++#ifdef PLATFORM_INTERFACE ++ free_irq(platform_get_irq(_dev, 0), pcd); ++#else ++ free_irq(_dev->irq, pcd); ++#endif ++ dwc_otg_pcd_remove(otg_dev->pcd); ++ free_wrapper(gadget_wrapper); ++ otg_dev->pcd = 0; ++} ++ ++#endif /* DWC_HOST_ONLY */ +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/dwc_otg_regs.h +@@ -0,0 +1,2550 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $ ++ * $Revision: #98 $ ++ * $Date: 2012/08/10 $ ++ * $Change: 2047372 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#ifndef __DWC_OTG_REGS_H__ ++#define __DWC_OTG_REGS_H__ ++ ++#include "dwc_otg_core_if.h" ++ ++/** ++ * @file ++ * ++ * This file contains the data structures for accessing the DWC_otg core registers. ++ * ++ * The application interfaces with the HS OTG core by reading from and ++ * writing to the Control and Status Register (CSR) space through the ++ * AHB Slave interface. These registers are 32 bits wide, and the ++ * addresses are 32-bit-block aligned. ++ * CSRs are classified as follows: ++ * - Core Global Registers ++ * - Device Mode Registers ++ * - Device Global Registers ++ * - Device Endpoint Specific Registers ++ * - Host Mode Registers ++ * - Host Global Registers ++ * - Host Port CSRs ++ * - Host Channel Specific Registers ++ * ++ * Only the Core Global registers can be accessed in both Device and ++ * Host modes. When the HS OTG core is operating in one mode, either ++ * Device or Host, the application must not access registers from the ++ * other mode. When the core switches from one mode to another, the ++ * registers in the new mode of operation must be reprogrammed as they ++ * would be after a power-on reset. ++ */ ++ ++/****************************************************************************/ ++/** DWC_otg Core registers . ++ * The dwc_otg_core_global_regs structure defines the size ++ * and relative field offsets for the Core Global registers. ++ */ ++typedef struct dwc_otg_core_global_regs { ++ /** OTG Control and Status Register. Offset: 000h */ ++ volatile uint32_t gotgctl; ++ /** OTG Interrupt Register. Offset: 004h */ ++ volatile uint32_t gotgint; ++ /**Core AHB Configuration Register. Offset: 008h */ ++ volatile uint32_t gahbcfg; ++ ++#define DWC_GLBINTRMASK 0x0001 ++#define DWC_DMAENABLE 0x0020 ++#define DWC_NPTXEMPTYLVL_EMPTY 0x0080 ++#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000 ++#define DWC_PTXEMPTYLVL_EMPTY 0x0100 ++#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000 ++ ++ /**Core USB Configuration Register. Offset: 00Ch */ ++ volatile uint32_t gusbcfg; ++ /**Core Reset Register. Offset: 010h */ ++ volatile uint32_t grstctl; ++ /**Core Interrupt Register. Offset: 014h */ ++ volatile uint32_t gintsts; ++ /**Core Interrupt Mask Register. Offset: 018h */ ++ volatile uint32_t gintmsk; ++ /**Receive Status Queue Read Register (Read Only). Offset: 01Ch */ ++ volatile uint32_t grxstsr; ++ /**Receive Status Queue Read & POP Register (Read Only). Offset: 020h*/ ++ volatile uint32_t grxstsp; ++ /**Receive FIFO Size Register. Offset: 024h */ ++ volatile uint32_t grxfsiz; ++ /**Non Periodic Transmit FIFO Size Register. Offset: 028h */ ++ volatile uint32_t gnptxfsiz; ++ /**Non Periodic Transmit FIFO/Queue Status Register (Read ++ * Only). Offset: 02Ch */ ++ volatile uint32_t gnptxsts; ++ /**I2C Access Register. Offset: 030h */ ++ volatile uint32_t gi2cctl; ++ /**PHY Vendor Control Register. Offset: 034h */ ++ volatile uint32_t gpvndctl; ++ /**General Purpose Input/Output Register. Offset: 038h */ ++ volatile uint32_t ggpio; ++ /**User ID Register. Offset: 03Ch */ ++ volatile uint32_t guid; ++ /**Synopsys ID Register (Read Only). Offset: 040h */ ++ volatile uint32_t gsnpsid; ++ /**User HW Config1 Register (Read Only). Offset: 044h */ ++ volatile uint32_t ghwcfg1; ++ /**User HW Config2 Register (Read Only). Offset: 048h */ ++ volatile uint32_t ghwcfg2; ++#define DWC_SLAVE_ONLY_ARCH 0 ++#define DWC_EXT_DMA_ARCH 1 ++#define DWC_INT_DMA_ARCH 2 ++ ++#define DWC_MODE_HNP_SRP_CAPABLE 0 ++#define DWC_MODE_SRP_ONLY_CAPABLE 1 ++#define DWC_MODE_NO_HNP_SRP_CAPABLE 2 ++#define DWC_MODE_SRP_CAPABLE_DEVICE 3 ++#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4 ++#define DWC_MODE_SRP_CAPABLE_HOST 5 ++#define DWC_MODE_NO_SRP_CAPABLE_HOST 6 ++ ++ /**User HW Config3 Register (Read Only). Offset: 04Ch */ ++ volatile uint32_t ghwcfg3; ++ /**User HW Config4 Register (Read Only). Offset: 050h*/ ++ volatile uint32_t ghwcfg4; ++ /** Core LPM Configuration register Offset: 054h*/ ++ volatile uint32_t glpmcfg; ++ /** Global PowerDn Register Offset: 058h */ ++ volatile uint32_t gpwrdn; ++ /** Global DFIFO SW Config Register Offset: 05Ch */ ++ volatile uint32_t gdfifocfg; ++ /** ADP Control Register Offset: 060h */ ++ volatile uint32_t adpctl; ++ /** Reserved Offset: 064h-0FFh */ ++ volatile uint32_t reserved39[39]; ++ /** Host Periodic Transmit FIFO Size Register. Offset: 100h */ ++ volatile uint32_t hptxfsiz; ++ /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled, ++ otherwise Device Transmit FIFO#n Register. ++ * Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15). */ ++ volatile uint32_t dtxfsiz[15]; ++} dwc_otg_core_global_regs_t; ++ ++/** ++ * This union represents the bit fields of the Core OTG Control ++ * and Status Register (GOTGCTL). Set the bits using the bit ++ * fields then write the d32 value to the register. ++ */ ++typedef union gotgctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned sesreqscs:1; ++ unsigned sesreq:1; ++ unsigned vbvalidoven:1; ++ unsigned vbvalidovval:1; ++ unsigned avalidoven:1; ++ unsigned avalidovval:1; ++ unsigned bvalidoven:1; ++ unsigned bvalidovval:1; ++ unsigned hstnegscs:1; ++ unsigned hnpreq:1; ++ unsigned hstsethnpen:1; ++ unsigned devhnpen:1; ++ unsigned reserved12_15:4; ++ unsigned conidsts:1; ++ unsigned dbnctime:1; ++ unsigned asesvld:1; ++ unsigned bsesvld:1; ++ unsigned otgver:1; ++ unsigned reserved1:1; ++ unsigned multvalidbc:5; ++ unsigned chirpen:1; ++ unsigned reserved28_31:4; ++ } b; ++} gotgctl_data_t; ++ ++/** ++ * This union represents the bit fields of the Core OTG Interrupt Register ++ * (GOTGINT). Set/clear the bits using the bit fields then write the d32 ++ * value to the register. ++ */ ++typedef union gotgint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Current Mode */ ++ unsigned reserved0_1:2; ++ ++ /** Session End Detected */ ++ unsigned sesenddet:1; ++ ++ unsigned reserved3_7:5; ++ ++ /** Session Request Success Status Change */ ++ unsigned sesreqsucstschng:1; ++ /** Host Negotiation Success Status Change */ ++ unsigned hstnegsucstschng:1; ++ ++ unsigned reserved10_16:7; ++ ++ /** Host Negotiation Detected */ ++ unsigned hstnegdet:1; ++ /** A-Device Timeout Change */ ++ unsigned adevtoutchng:1; ++ /** Debounce Done */ ++ unsigned debdone:1; ++ /** Multi-Valued input changed */ ++ unsigned mvic:1; ++ ++ unsigned reserved31_21:11; ++ ++ } b; ++} gotgint_data_t; ++ ++/** ++ * This union represents the bit fields of the Core AHB Configuration ++ * Register (GAHBCFG). Set/clear the bits using the bit fields then ++ * write the d32 value to the register. ++ */ ++typedef union gahbcfg_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned glblintrmsk:1; ++#define DWC_GAHBCFG_GLBINT_ENABLE 1 ++ ++ unsigned hburstlen:4; ++#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7 ++ ++ unsigned dmaenable:1; ++#define DWC_GAHBCFG_DMAENABLE 1 ++ unsigned reserved:1; ++ unsigned nptxfemplvl_txfemplvl:1; ++ unsigned ptxfemplvl:1; ++#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1 ++#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0 ++ unsigned reserved9_20:12; ++ unsigned remmemsupp:1; ++ unsigned notialldmawrit:1; ++ unsigned ahbsingle:1; ++ unsigned reserved24_31:8; ++ } b; ++} gahbcfg_data_t; ++ ++/** ++ * This union represents the bit fields of the Core USB Configuration ++ * Register (GUSBCFG). Set the bits using the bit fields then write ++ * the d32 value to the register. ++ */ ++typedef union gusbcfg_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned toutcal:3; ++ unsigned phyif:1; ++ unsigned ulpi_utmi_sel:1; ++ unsigned fsintf:1; ++ unsigned physel:1; ++ unsigned ddrsel:1; ++ unsigned srpcap:1; ++ unsigned hnpcap:1; ++ unsigned usbtrdtim:4; ++ unsigned reserved1:1; ++ unsigned phylpwrclksel:1; ++ unsigned otgutmifssel:1; ++ unsigned ulpi_fsls:1; ++ unsigned ulpi_auto_res:1; ++ unsigned ulpi_clk_sus_m:1; ++ unsigned ulpi_ext_vbus_drv:1; ++ unsigned ulpi_int_vbus_indicator:1; ++ unsigned term_sel_dl_pulse:1; ++ unsigned indicator_complement:1; ++ unsigned indicator_pass_through:1; ++ unsigned ulpi_int_prot_dis:1; ++ unsigned ic_usb_cap:1; ++ unsigned ic_traffic_pull_remove:1; ++ unsigned tx_end_delay:1; ++ unsigned force_host_mode:1; ++ unsigned force_dev_mode:1; ++ unsigned reserved31:1; ++ } b; ++} gusbcfg_data_t; ++ ++/** ++ * This union represents the bit fields of the Core Reset Register ++ * (GRSTCTL). Set/clear the bits using the bit fields then write the ++ * d32 value to the register. ++ */ ++typedef union grstctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Core Soft Reset (CSftRst) (Device and Host) ++ * ++ * The application can flush the control logic in the ++ * entire core using this bit. This bit resets the ++ * pipelines in the AHB Clock domain as well as the ++ * PHY Clock domain. ++ * ++ * The state machines are reset to an IDLE state, the ++ * control bits in the CSRs are cleared, all the ++ * transmit FIFOs and the receive FIFO are flushed. ++ * ++ * The status mask bits that control the generation of ++ * the interrupt, are cleared, to clear the ++ * interrupt. The interrupt status bits are not ++ * cleared, so the application can get the status of ++ * any events that occurred in the core after it has ++ * set this bit. ++ * ++ * Any transactions on the AHB are terminated as soon ++ * as possible following the protocol. Any ++ * transactions on the USB are terminated immediately. ++ * ++ * The configuration settings in the CSRs are ++ * unchanged, so the software doesn't have to ++ * reprogram these registers (Device ++ * Configuration/Host Configuration/Core System ++ * Configuration/Core PHY Configuration). ++ * ++ * The application can write to this bit, any time it ++ * wants to reset the core. This is a self clearing ++ * bit and the core clears this bit after all the ++ * necessary logic is reset in the core, which may ++ * take several clocks, depending on the current state ++ * of the core. ++ */ ++ unsigned csftrst:1; ++ /** Hclk Soft Reset ++ * ++ * The application uses this bit to reset the control logic in ++ * the AHB clock domain. Only AHB clock domain pipelines are ++ * reset. ++ */ ++ unsigned hsftrst:1; ++ /** Host Frame Counter Reset (Host Only)
++ * ++ * The application can reset the (micro)frame number ++ * counter inside the core, using this bit. When the ++ * (micro)frame counter is reset, the subsequent SOF ++ * sent out by the core, will have a (micro)frame ++ * number of 0. ++ */ ++ unsigned hstfrm:1; ++ /** In Token Sequence Learning Queue Flush ++ * (INTknQFlsh) (Device Only) ++ */ ++ unsigned intknqflsh:1; ++ /** RxFIFO Flush (RxFFlsh) (Device and Host) ++ * ++ * The application can flush the entire Receive FIFO ++ * using this bit. The application must first ++ * ensure that the core is not in the middle of a ++ * transaction. The application should write into ++ * this bit, only after making sure that neither the ++ * DMA engine is reading from the RxFIFO nor the MAC ++ * is writing the data in to the FIFO. The ++ * application should wait until the bit is cleared ++ * before performing any other operations. This bit ++ * will takes 8 clocks (slowest of PHY or AHB clock) ++ * to clear. ++ */ ++ unsigned rxfflsh:1; ++ /** TxFIFO Flush (TxFFlsh) (Device and Host). ++ * ++ * This bit is used to selectively flush a single or ++ * all transmit FIFOs. The application must first ++ * ensure that the core is not in the middle of a ++ * transaction. The application should write into ++ * this bit, only after making sure that neither the ++ * DMA engine is writing into the TxFIFO nor the MAC ++ * is reading the data out of the FIFO. The ++ * application should wait until the core clears this ++ * bit, before performing any operations. This bit ++ * will takes 8 clocks (slowest of PHY or AHB clock) ++ * to clear. ++ */ ++ unsigned txfflsh:1; ++ ++ /** TxFIFO Number (TxFNum) (Device and Host). ++ * ++ * This is the FIFO number which needs to be flushed, ++ * using the TxFIFO Flush bit. This field should not ++ * be changed until the TxFIFO Flush bit is cleared by ++ * the core. ++ * - 0x0 : Non Periodic TxFIFO Flush ++ * - 0x1 : Periodic TxFIFO #1 Flush in device mode ++ * or Periodic TxFIFO in host mode ++ * - 0x2 : Periodic TxFIFO #2 Flush in device mode. ++ * - ... ++ * - 0xF : Periodic TxFIFO #15 Flush in device mode ++ * - 0x10: Flush all the Transmit NonPeriodic and ++ * Transmit Periodic FIFOs in the core ++ */ ++ unsigned txfnum:5; ++ /** Reserved */ ++ unsigned reserved11_29:19; ++ /** DMA Request Signal. Indicated DMA request is in ++ * probress. Used for debug purpose. */ ++ unsigned dmareq:1; ++ /** AHB Master Idle. Indicates the AHB Master State ++ * Machine is in IDLE condition. */ ++ unsigned ahbidle:1; ++ } b; ++} grstctl_t; ++ ++/** ++ * This union represents the bit fields of the Core Interrupt Mask ++ * Register (GINTMSK). Set/clear the bits using the bit fields then ++ * write the d32 value to the register. ++ */ ++typedef union gintmsk_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned reserved0:1; ++ unsigned modemismatch:1; ++ unsigned otgintr:1; ++ unsigned sofintr:1; ++ unsigned rxstsqlvl:1; ++ unsigned nptxfempty:1; ++ unsigned ginnakeff:1; ++ unsigned goutnakeff:1; ++ unsigned ulpickint:1; ++ unsigned i2cintr:1; ++ unsigned erlysuspend:1; ++ unsigned usbsuspend:1; ++ unsigned usbreset:1; ++ unsigned enumdone:1; ++ unsigned isooutdrop:1; ++ unsigned eopframe:1; ++ unsigned restoredone:1; ++ unsigned epmismatch:1; ++ unsigned inepintr:1; ++ unsigned outepintr:1; ++ unsigned incomplisoin:1; ++ unsigned incomplisoout:1; ++ unsigned fetsusp:1; ++ unsigned resetdet:1; ++ unsigned portintr:1; ++ unsigned hcintr:1; ++ unsigned ptxfempty:1; ++ unsigned lpmtranrcvd:1; ++ unsigned conidstschng:1; ++ unsigned disconnect:1; ++ unsigned sessreqintr:1; ++ unsigned wkupintr:1; ++ } b; ++} gintmsk_data_t; ++/** ++ * This union represents the bit fields of the Core Interrupt Register ++ * (GINTSTS). Set/clear the bits using the bit fields then write the ++ * d32 value to the register. ++ */ ++typedef union gintsts_data { ++ /** raw register data */ ++ uint32_t d32; ++#define DWC_SOF_INTR_MASK 0x0008 ++ /** register bits */ ++ struct { ++#define DWC_HOST_MODE 1 ++ unsigned curmode:1; ++ unsigned modemismatch:1; ++ unsigned otgintr:1; ++ unsigned sofintr:1; ++ unsigned rxstsqlvl:1; ++ unsigned nptxfempty:1; ++ unsigned ginnakeff:1; ++ unsigned goutnakeff:1; ++ unsigned ulpickint:1; ++ unsigned i2cintr:1; ++ unsigned erlysuspend:1; ++ unsigned usbsuspend:1; ++ unsigned usbreset:1; ++ unsigned enumdone:1; ++ unsigned isooutdrop:1; ++ unsigned eopframe:1; ++ unsigned restoredone:1; ++ unsigned epmismatch:1; ++ unsigned inepint:1; ++ unsigned outepintr:1; ++ unsigned incomplisoin:1; ++ unsigned incomplisoout:1; ++ unsigned fetsusp:1; ++ unsigned resetdet:1; ++ unsigned portintr:1; ++ unsigned hcintr:1; ++ unsigned ptxfempty:1; ++ unsigned lpmtranrcvd:1; ++ unsigned conidstschng:1; ++ unsigned disconnect:1; ++ unsigned sessreqintr:1; ++ unsigned wkupintr:1; ++ } b; ++} gintsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Device Receive Status Read and ++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the d32 ++ * element then read out the bits using the bit elements. ++ */ ++typedef union device_grxsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned epnum:4; ++ unsigned bcnt:11; ++ unsigned dpid:2; ++ ++#define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet ++#define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete ++ ++#define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK ++#define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete ++#define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet ++ unsigned pktsts:4; ++ unsigned fn:4; ++ unsigned reserved25_31:7; ++ } b; ++} device_grxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Receive Status Read and ++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the d32 ++ * element then read out the bits using the bit elements. ++ */ ++typedef union host_grxsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned chnum:4; ++ unsigned bcnt:11; ++ unsigned dpid:2; ++ ++ unsigned pktsts:4; ++#define DWC_GRXSTS_PKTSTS_IN 0x2 ++#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3 ++#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5 ++#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7 ++ ++ unsigned reserved21_31:11; ++ } b; ++} host_grxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ, ++ * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the d32 element ++ * then read out the bits using the bit elements. ++ */ ++typedef union fifosize_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned startaddr:16; ++ unsigned depth:16; ++ } b; ++} fifosize_data_t; ++ ++/** ++ * This union represents the bit fields in the Non-Periodic Transmit ++ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the ++ * d32 element then read out the bits using the bit ++ * elements. ++ */ ++typedef union gnptxsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned nptxfspcavail:16; ++ unsigned nptxqspcavail:8; ++ /** Top of the Non-Periodic Transmit Request Queue ++ * - bit 24 - Terminate (Last entry for the selected ++ * channel/EP) ++ * - bits 26:25 - Token Type ++ * - 2'b00 - IN/OUT ++ * - 2'b01 - Zero Length OUT ++ * - 2'b10 - PING/Complete Split ++ * - 2'b11 - Channel Halt ++ * - bits 30:27 - Channel/EP Number ++ */ ++ unsigned nptxqtop_terminate:1; ++ unsigned nptxqtop_token:2; ++ unsigned nptxqtop_chnep:4; ++ unsigned reserved:1; ++ } b; ++} gnptxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Transmit ++ * FIFO Status Register (DTXFSTS). Read the register into the ++ * d32 element then read out the bits using the bit ++ * elements. ++ */ ++typedef union dtxfsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned txfspcavail:16; ++ unsigned reserved:16; ++ } b; ++} dtxfsts_data_t; ++ ++/** ++ * This union represents the bit fields in the I2C Control Register ++ * (I2CCTL). Read the register into the d32 element then read out the ++ * bits using the bit elements. ++ */ ++typedef union gi2cctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned rwdata:8; ++ unsigned regaddr:8; ++ unsigned addr:7; ++ unsigned i2cen:1; ++ unsigned ack:1; ++ unsigned i2csuspctl:1; ++ unsigned i2cdevaddr:2; ++ unsigned i2cdatse0:1; ++ unsigned reserved:1; ++ unsigned rw:1; ++ unsigned bsydne:1; ++ } b; ++} gi2cctl_data_t; ++ ++/** ++ * This union represents the bit fields in the PHY Vendor Control Register ++ * (GPVNDCTL). Read the register into the d32 element then read out the ++ * bits using the bit elements. ++ */ ++typedef union gpvndctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned regdata:8; ++ unsigned vctrl:8; ++ unsigned regaddr16_21:6; ++ unsigned regwr:1; ++ unsigned reserved23_24:2; ++ unsigned newregreq:1; ++ unsigned vstsbsy:1; ++ unsigned vstsdone:1; ++ unsigned reserved28_30:3; ++ unsigned disulpidrvr:1; ++ } b; ++} gpvndctl_data_t; ++ ++/** ++ * This union represents the bit fields in the General Purpose ++ * Input/Output Register (GGPIO). ++ * Read the register into the d32 element then read out the ++ * bits using the bit elements. ++ */ ++typedef union ggpio_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned gpi:16; ++ unsigned gpo:16; ++ } b; ++} ggpio_data_t; ++ ++/** ++ * This union represents the bit fields in the User ID Register ++ * (GUID). Read the register into the d32 element then read out the ++ * bits using the bit elements. ++ */ ++typedef union guid_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned rwdata:32; ++ } b; ++} guid_data_t; ++ ++/** ++ * This union represents the bit fields in the Synopsys ID Register ++ * (GSNPSID). Read the register into the d32 element then read out the ++ * bits using the bit elements. ++ */ ++typedef union gsnpsid_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned rwdata:32; ++ } b; ++} gsnpsid_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config1 ++ * Register. Read the register into the d32 element then read ++ * out the bits using the bit elements. ++ */ ++typedef union hwcfg1_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned ep_dir0:2; ++ unsigned ep_dir1:2; ++ unsigned ep_dir2:2; ++ unsigned ep_dir3:2; ++ unsigned ep_dir4:2; ++ unsigned ep_dir5:2; ++ unsigned ep_dir6:2; ++ unsigned ep_dir7:2; ++ unsigned ep_dir8:2; ++ unsigned ep_dir9:2; ++ unsigned ep_dir10:2; ++ unsigned ep_dir11:2; ++ unsigned ep_dir12:2; ++ unsigned ep_dir13:2; ++ unsigned ep_dir14:2; ++ unsigned ep_dir15:2; ++ } b; ++} hwcfg1_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config2 ++ * Register. Read the register into the d32 element then read ++ * out the bits using the bit elements. ++ */ ++typedef union hwcfg2_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /* GHWCFG2 */ ++ unsigned op_mode:3; ++#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0 ++#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1 ++#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2 ++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3 ++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4 ++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5 ++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6 ++ ++ unsigned architecture:2; ++ unsigned point2point:1; ++ unsigned hs_phy_type:2; ++#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0 ++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1 ++#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2 ++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3 ++ ++ unsigned fs_phy_type:2; ++ unsigned num_dev_ep:4; ++ unsigned num_host_chan:4; ++ unsigned perio_ep_supported:1; ++ unsigned dynamic_fifo:1; ++ unsigned multi_proc_int:1; ++ unsigned reserved21:1; ++ unsigned nonperio_tx_q_depth:2; ++ unsigned host_perio_tx_q_depth:2; ++ unsigned dev_token_q_depth:5; ++ unsigned otg_enable_ic_usb:1; ++ } b; ++} hwcfg2_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config3 ++ * Register. Read the register into the d32 element then read ++ * out the bits using the bit elements. ++ */ ++typedef union hwcfg3_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /* GHWCFG3 */ ++ unsigned xfer_size_cntr_width:4; ++ unsigned packet_size_cntr_width:3; ++ unsigned otg_func:1; ++ unsigned i2c:1; ++ unsigned vendor_ctrl_if:1; ++ unsigned optional_features:1; ++ unsigned synch_reset_type:1; ++ unsigned adp_supp:1; ++ unsigned otg_enable_hsic:1; ++ unsigned bc_support:1; ++ unsigned otg_lpm_en:1; ++ unsigned dfifo_depth:16; ++ } b; ++} hwcfg3_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config4 ++ * Register. Read the register into the d32 element then read ++ * out the bits using the bit elements. ++ */ ++typedef union hwcfg4_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned num_dev_perio_in_ep:4; ++ unsigned power_optimiz:1; ++ unsigned min_ahb_freq:1; ++ unsigned hiber:1; ++ unsigned xhiber:1; ++ unsigned reserved:6; ++ unsigned utmi_phy_data_width:2; ++ unsigned num_dev_mode_ctrl_ep:4; ++ unsigned iddig_filt_en:1; ++ unsigned vbus_valid_filt_en:1; ++ unsigned a_valid_filt_en:1; ++ unsigned b_valid_filt_en:1; ++ unsigned session_end_filt_en:1; ++ unsigned ded_fifo_en:1; ++ unsigned num_in_eps:4; ++ unsigned desc_dma:1; ++ unsigned desc_dma_dyn:1; ++ } b; ++} hwcfg4_data_t; ++ ++/** ++ * This union represents the bit fields of the Core LPM Configuration ++ * Register (GLPMCFG). Set the bits using bit fields then write ++ * the d32 value to the register. ++ */ ++typedef union glpmctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** LPM-Capable (LPMCap) (Device and Host) ++ * The application uses this bit to control ++ * the DWC_otg core LPM capabilities. ++ */ ++ unsigned lpm_cap_en:1; ++ /** LPM response programmed by application (AppL1Res) (Device) ++ * Handshake response to LPM token pre-programmed ++ * by device application software. ++ */ ++ unsigned appl_resp:1; ++ /** Host Initiated Resume Duration (HIRD) (Device and Host) ++ * In Host mode this field indicates the value of HIRD ++ * to be sent in an LPM transaction. ++ * In Device mode this field is updated with the ++ * Received LPM Token HIRD bmAttribute ++ * when an ACK/NYET/STALL response is sent ++ * to an LPM transaction. ++ */ ++ unsigned hird:4; ++ /** RemoteWakeEnable (bRemoteWake) (Device and Host) ++ * In Host mode this bit indicates the value of remote ++ * wake up to be sent in wIndex field of LPM transaction. ++ * In Device mode this field is updated with the ++ * Received LPM Token bRemoteWake bmAttribute ++ * when an ACK/NYET/STALL response is sent ++ * to an LPM transaction. ++ */ ++ unsigned rem_wkup_en:1; ++ /** Enable utmi_sleep_n (EnblSlpM) (Device and Host) ++ * The application uses this bit to control ++ * the utmi_sleep_n assertion to the PHY when in L1 state. ++ */ ++ unsigned en_utmi_sleep:1; ++ /** HIRD Threshold (HIRD_Thres) (Device and Host) ++ */ ++ unsigned hird_thres:5; ++ /** LPM Response (CoreL1Res) (Device and Host) ++ * In Host mode this bit contains handsake response to ++ * LPM transaction. ++ * In Device mode the response of the core to ++ * LPM transaction received is reflected in these two bits. ++ - 0x0 : ERROR (No handshake response) ++ - 0x1 : STALL ++ - 0x2 : NYET ++ - 0x3 : ACK ++ */ ++ unsigned lpm_resp:2; ++ /** Port Sleep Status (SlpSts) (Device and Host) ++ * This bit is set as long as a Sleep condition ++ * is present on the USB bus. ++ */ ++ unsigned prt_sleep_sts:1; ++ /** Sleep State Resume OK (L1ResumeOK) (Device and Host) ++ * Indicates that the application or host ++ * can start resume from Sleep state. ++ */ ++ unsigned sleep_state_resumeok:1; ++ /** LPM channel Index (LPM_Chnl_Indx) (Host) ++ * The channel number on which the LPM transaction ++ * has to be applied while sending ++ * an LPM transaction to the local device. ++ */ ++ unsigned lpm_chan_index:4; ++ /** LPM Retry Count (LPM_Retry_Cnt) (Host) ++ * Number host retries that would be performed ++ * if the device response was not valid response. ++ */ ++ unsigned retry_count:3; ++ /** Send LPM Transaction (SndLPM) (Host) ++ * When set by application software, ++ * an LPM transaction containing two tokens ++ * is sent. ++ */ ++ unsigned send_lpm:1; ++ /** LPM Retry status (LPM_RetryCnt_Sts) (Host) ++ * Number of LPM Host Retries still remaining ++ * to be transmitted for the current LPM sequence ++ */ ++ unsigned retry_count_sts:3; ++ unsigned reserved28_29:2; ++ /** In host mode once this bit is set, the host ++ * configures to drive the HSIC Idle state on the bus. ++ * It then waits for the device to initiate the Connect sequence. ++ * In device mode once this bit is set, the device waits for ++ * the HSIC Idle line state on the bus. Upon receving the Idle ++ * line state, it initiates the HSIC Connect sequence. ++ */ ++ unsigned hsic_connect:1; ++ /** This bit overrides and functionally inverts ++ * the if_select_hsic input port signal. ++ */ ++ unsigned inv_sel_hsic:1; ++ } b; ++} glpmcfg_data_t; ++ ++/** ++ * This union represents the bit fields of the Core ADP Timer, Control and ++ * Status Register (ADPTIMCTLSTS). Set the bits using bit fields then write ++ * the d32 value to the register. ++ */ ++typedef union adpctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Probe Discharge (PRB_DSCHG) ++ * These bits set the times for TADP_DSCHG. ++ * These bits are defined as follows: ++ * 2'b00 - 4 msec ++ * 2'b01 - 8 msec ++ * 2'b10 - 16 msec ++ * 2'b11 - 32 msec ++ */ ++ unsigned prb_dschg:2; ++ /** Probe Delta (PRB_DELTA) ++ * These bits set the resolution for RTIM value. ++ * The bits are defined in units of 32 kHz clock cycles as follows: ++ * 2'b00 - 1 cycles ++ * 2'b01 - 2 cycles ++ * 2'b10 - 3 cycles ++ * 2'b11 - 4 cycles ++ * For example if this value is chosen to 2'b01, it means that RTIM ++ * increments for every 3(three) 32Khz clock cycles. ++ */ ++ unsigned prb_delta:2; ++ /** Probe Period (PRB_PER) ++ * These bits sets the TADP_PRD as shown in Figure 4 as follows: ++ * 2'b00 - 0.625 to 0.925 sec (typical 0.775 sec) ++ * 2'b01 - 1.25 to 1.85 sec (typical 1.55 sec) ++ * 2'b10 - 1.9 to 2.6 sec (typical 2.275 sec) ++ * 2'b11 - Reserved ++ */ ++ unsigned prb_per:2; ++ /** These bits capture the latest time it took for VBUS to ramp from ++ * VADP_SINK to VADP_PRB. ++ * 0x000 - 1 cycles ++ * 0x001 - 2 cycles ++ * 0x002 - 3 cycles ++ * etc ++ * 0x7FF - 2048 cycles ++ * A time of 1024 cycles at 32 kHz corresponds to a time of 32 msec. ++ */ ++ unsigned rtim:11; ++ /** Enable Probe (EnaPrb) ++ * When programmed to 1'b1, the core performs a probe operation. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned enaprb:1; ++ /** Enable Sense (EnaSns) ++ * When programmed to 1'b1, the core performs a Sense operation. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned enasns:1; ++ /** ADP Reset (ADPRes) ++ * When set, ADP controller is reset. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adpres:1; ++ /** ADP Enable (ADPEn) ++ * When set, the core performs either ADP probing or sensing ++ * based on EnaPrb or EnaSns. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adpen:1; ++ /** ADP Probe Interrupt (ADP_PRB_INT) ++ * When this bit is set, it means that the VBUS ++ * voltage is greater than VADP_PRB or VADP_PRB is reached. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_prb_int:1; ++ /** ++ * ADP Sense Interrupt (ADP_SNS_INT) ++ * When this bit is set, it means that the VBUS voltage is greater than ++ * VADP_SNS value or VADP_SNS is reached. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_sns_int:1; ++ /** ADP Tomeout Interrupt (ADP_TMOUT_INT) ++ * This bit is relevant only for an ADP probe. ++ * When this bit is set, it means that the ramp time has ++ * completed ie ADPCTL.RTIM has reached its terminal value ++ * of 0x7FF. This is a debug feature that allows software ++ * to read the ramp time after each cycle. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_tmout_int:1; ++ /** ADP Probe Interrupt Mask (ADP_PRB_INT_MSK) ++ * When this bit is set, it unmasks the interrupt due to ADP_PRB_INT. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_prb_int_msk:1; ++ /** ADP Sense Interrupt Mask (ADP_SNS_INT_MSK) ++ * When this bit is set, it unmasks the interrupt due to ADP_SNS_INT. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_sns_int_msk:1; ++ /** ADP Timoeout Interrupt Mask (ADP_TMOUT_MSK) ++ * When this bit is set, it unmasks the interrupt due to ADP_TMOUT_INT. ++ * This bit is valid only if OTG_Ver = 1'b1. ++ */ ++ unsigned adp_tmout_int_msk:1; ++ /** Access Request ++ * 2'b00 - Read/Write Valid (updated by the core) ++ * 2'b01 - Read ++ * 2'b00 - Write ++ * 2'b00 - Reserved ++ */ ++ unsigned ar:2; ++ /** Reserved */ ++ unsigned reserved29_31:3; ++ } b; ++} adpctl_data_t; ++ ++//////////////////////////////////////////// ++// Device Registers ++/** ++ * Device Global Registers. Offsets 800h-BFFh ++ * ++ * The following structures define the size and relative field offsets ++ * for the Device Mode Registers. ++ * ++ * These registers are visible only in Device mode and must not be ++ * accessed in Host mode, as the results are unknown. ++ */ ++typedef struct dwc_otg_dev_global_regs { ++ /** Device Configuration Register. Offset 800h */ ++ volatile uint32_t dcfg; ++ /** Device Control Register. Offset: 804h */ ++ volatile uint32_t dctl; ++ /** Device Status Register (Read Only). Offset: 808h */ ++ volatile uint32_t dsts; ++ /** Reserved. Offset: 80Ch */ ++ uint32_t unused; ++ /** Device IN Endpoint Common Interrupt Mask ++ * Register. Offset: 810h */ ++ volatile uint32_t diepmsk; ++ /** Device OUT Endpoint Common Interrupt Mask ++ * Register. Offset: 814h */ ++ volatile uint32_t doepmsk; ++ /** Device All Endpoints Interrupt Register. Offset: 818h */ ++ volatile uint32_t daint; ++ /** Device All Endpoints Interrupt Mask Register. Offset: ++ * 81Ch */ ++ volatile uint32_t daintmsk; ++ /** Device IN Token Queue Read Register-1 (Read Only). ++ * Offset: 820h */ ++ volatile uint32_t dtknqr1; ++ /** Device IN Token Queue Read Register-2 (Read Only). ++ * Offset: 824h */ ++ volatile uint32_t dtknqr2; ++ /** Device VBUS discharge Register. Offset: 828h */ ++ volatile uint32_t dvbusdis; ++ /** Device VBUS Pulse Register. Offset: 82Ch */ ++ volatile uint32_t dvbuspulse; ++ /** Device IN Token Queue Read Register-3 (Read Only). / ++ * Device Thresholding control register (Read/Write) ++ * Offset: 830h */ ++ volatile uint32_t dtknqr3_dthrctl; ++ /** Device IN Token Queue Read Register-4 (Read Only). / ++ * Device IN EPs empty Inr. Mask Register (Read/Write) ++ * Offset: 834h */ ++ volatile uint32_t dtknqr4_fifoemptymsk; ++ /** Device Each Endpoint Interrupt Register (Read Only). / ++ * Offset: 838h */ ++ volatile uint32_t deachint; ++ /** Device Each Endpoint Interrupt mask Register (Read/Write). / ++ * Offset: 83Ch */ ++ volatile uint32_t deachintmsk; ++ /** Device Each In Endpoint Interrupt mask Register (Read/Write). / ++ * Offset: 840h */ ++ volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS]; ++ /** Device Each Out Endpoint Interrupt mask Register (Read/Write). / ++ * Offset: 880h */ ++ volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS]; ++} dwc_otg_device_global_regs_t; ++ ++/** ++ * This union represents the bit fields in the Device Configuration ++ * Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. Write the ++ * d32 member to the dcfg register. ++ */ ++typedef union dcfg_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Device Speed */ ++ unsigned devspd:2; ++ /** Non Zero Length Status OUT Handshake */ ++ unsigned nzstsouthshk:1; ++#define DWC_DCFG_SEND_STALL 1 ++ ++ unsigned ena32khzs:1; ++ /** Device Addresses */ ++ unsigned devaddr:7; ++ /** Periodic Frame Interval */ ++ unsigned perfrint:2; ++#define DWC_DCFG_FRAME_INTERVAL_80 0 ++#define DWC_DCFG_FRAME_INTERVAL_85 1 ++#define DWC_DCFG_FRAME_INTERVAL_90 2 ++#define DWC_DCFG_FRAME_INTERVAL_95 3 ++ ++ /** Enable Device OUT NAK for bulk in DDMA mode */ ++ unsigned endevoutnak:1; ++ ++ unsigned reserved14_17:4; ++ /** In Endpoint Mis-match count */ ++ unsigned epmscnt:5; ++ /** Enable Descriptor DMA in Device mode */ ++ unsigned descdma:1; ++ unsigned perschintvl:2; ++ unsigned resvalid:6; ++ } b; ++} dcfg_data_t; ++ ++/** ++ * This union represents the bit fields in the Device Control ++ * Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union dctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Remote Wakeup */ ++ unsigned rmtwkupsig:1; ++ /** Soft Disconnect */ ++ unsigned sftdiscon:1; ++ /** Global Non-Periodic IN NAK Status */ ++ unsigned gnpinnaksts:1; ++ /** Global OUT NAK Status */ ++ unsigned goutnaksts:1; ++ /** Test Control */ ++ unsigned tstctl:3; ++ /** Set Global Non-Periodic IN NAK */ ++ unsigned sgnpinnak:1; ++ /** Clear Global Non-Periodic IN NAK */ ++ unsigned cgnpinnak:1; ++ /** Set Global OUT NAK */ ++ unsigned sgoutnak:1; ++ /** Clear Global OUT NAK */ ++ unsigned cgoutnak:1; ++ /** Power-On Programming Done */ ++ unsigned pwronprgdone:1; ++ /** Reserved */ ++ unsigned reserved:1; ++ /** Global Multi Count */ ++ unsigned gmc:2; ++ /** Ignore Frame Number for ISOC EPs */ ++ unsigned ifrmnum:1; ++ /** NAK on Babble */ ++ unsigned nakonbble:1; ++ /** Enable Continue on BNA */ ++ unsigned encontonbna:1; ++ ++ unsigned reserved18_31:14; ++ } b; ++} dctl_data_t; ++ ++/** ++ * This union represents the bit fields in the Device Status ++ * Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union dsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Suspend Status */ ++ unsigned suspsts:1; ++ /** Enumerated Speed */ ++ unsigned enumspd:2; ++#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0 ++#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1 ++#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2 ++#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3 ++ /** Erratic Error */ ++ unsigned errticerr:1; ++ unsigned reserved4_7:4; ++ /** Frame or Microframe Number of the received SOF */ ++ unsigned soffn:14; ++ unsigned reserved22_31:10; ++ } b; ++} dsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Device IN EP Interrupt ++ * Register and the Device IN EP Common Mask Register. ++ * ++ * - Read the register into the d32 member then set/clear the ++ * bits using the bit elements. ++ */ ++typedef union diepint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer complete mask */ ++ unsigned xfercompl:1; ++ /** Endpoint disable mask */ ++ unsigned epdisabled:1; ++ /** AHB Error mask */ ++ unsigned ahberr:1; ++ /** TimeOUT Handshake mask (non-ISOC EPs) */ ++ unsigned timeout:1; ++ /** IN Token received with TxF Empty mask */ ++ unsigned intktxfemp:1; ++ /** IN Token Received with EP mismatch mask */ ++ unsigned intknepmis:1; ++ /** IN Endpoint NAK Effective mask */ ++ unsigned inepnakeff:1; ++ /** Reserved */ ++ unsigned emptyintr:1; ++ ++ unsigned txfifoundrn:1; ++ ++ /** BNA Interrupt mask */ ++ unsigned bna:1; ++ ++ unsigned reserved10_12:3; ++ /** BNA Interrupt mask */ ++ unsigned nak:1; ++ ++ unsigned reserved14_31:18; ++ } b; ++} diepint_data_t; ++ ++/** ++ * This union represents the bit fields in the Device IN EP ++ * Common/Dedicated Interrupt Mask Register. ++ */ ++typedef union diepint_data diepmsk_data_t; ++ ++/** ++ * This union represents the bit fields in the Device OUT EP Interrupt ++ * Registerand Device OUT EP Common Interrupt Mask Register. ++ * ++ * - Read the register into the d32 member then set/clear the ++ * bits using the bit elements. ++ */ ++typedef union doepint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer complete */ ++ unsigned xfercompl:1; ++ /** Endpoint disable */ ++ unsigned epdisabled:1; ++ /** AHB Error */ ++ unsigned ahberr:1; ++ /** Setup Phase Done (contorl EPs) */ ++ unsigned setup:1; ++ /** OUT Token Received when Endpoint Disabled */ ++ unsigned outtknepdis:1; ++ ++ unsigned stsphsercvd:1; ++ /** Back-to-Back SETUP Packets Received */ ++ unsigned back2backsetup:1; ++ ++ unsigned reserved7:1; ++ /** OUT packet Error */ ++ unsigned outpkterr:1; ++ /** BNA Interrupt */ ++ unsigned bna:1; ++ ++ unsigned reserved10:1; ++ /** Packet Drop Status */ ++ unsigned pktdrpsts:1; ++ /** Babble Interrupt */ ++ unsigned babble:1; ++ /** NAK Interrupt */ ++ unsigned nak:1; ++ /** NYET Interrupt */ ++ unsigned nyet:1; ++ /** Bit indicating setup packet received */ ++ unsigned sr:1; ++ ++ unsigned reserved16_31:16; ++ } b; ++} doepint_data_t; ++ ++/** ++ * This union represents the bit fields in the Device OUT EP ++ * Common/Dedicated Interrupt Mask Register. ++ */ ++typedef union doepint_data doepmsk_data_t; ++ ++/** ++ * This union represents the bit fields in the Device All EP Interrupt ++ * and Mask Registers. ++ * - Read the register into the d32 member then set/clear the ++ * bits using the bit elements. ++ */ ++typedef union daint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** IN Endpoint bits */ ++ unsigned in:16; ++ /** OUT Endpoint bits */ ++ unsigned out:16; ++ } ep; ++ struct { ++ /** IN Endpoint bits */ ++ unsigned inep0:1; ++ unsigned inep1:1; ++ unsigned inep2:1; ++ unsigned inep3:1; ++ unsigned inep4:1; ++ unsigned inep5:1; ++ unsigned inep6:1; ++ unsigned inep7:1; ++ unsigned inep8:1; ++ unsigned inep9:1; ++ unsigned inep10:1; ++ unsigned inep11:1; ++ unsigned inep12:1; ++ unsigned inep13:1; ++ unsigned inep14:1; ++ unsigned inep15:1; ++ /** OUT Endpoint bits */ ++ unsigned outep0:1; ++ unsigned outep1:1; ++ unsigned outep2:1; ++ unsigned outep3:1; ++ unsigned outep4:1; ++ unsigned outep5:1; ++ unsigned outep6:1; ++ unsigned outep7:1; ++ unsigned outep8:1; ++ unsigned outep9:1; ++ unsigned outep10:1; ++ unsigned outep11:1; ++ unsigned outep12:1; ++ unsigned outep13:1; ++ unsigned outep14:1; ++ unsigned outep15:1; ++ } b; ++} daint_data_t; ++ ++/** ++ * This union represents the bit fields in the Device IN Token Queue ++ * Read Registers. ++ * - Read the register into the d32 member. ++ * - READ-ONLY Register ++ */ ++typedef union dtknq1_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** In Token Queue Write Pointer */ ++ unsigned intknwptr:5; ++ /** Reserved */ ++ unsigned reserved05_06:2; ++ /** write pointer has wrapped. */ ++ unsigned wrap_bit:1; ++ /** EP Numbers of IN Tokens 0 ... 4 */ ++ unsigned epnums0_5:24; ++ } b; ++} dtknq1_data_t; ++ ++/** ++ * This union represents Threshold control Register ++ * - Read and write the register into the d32 member. ++ * - READ-WRITABLE Register ++ */ ++typedef union dthrctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** non ISO Tx Thr. Enable */ ++ unsigned non_iso_thr_en:1; ++ /** ISO Tx Thr. Enable */ ++ unsigned iso_thr_en:1; ++ /** Tx Thr. Length */ ++ unsigned tx_thr_len:9; ++ /** AHB Threshold ratio */ ++ unsigned ahb_thr_ratio:2; ++ /** Reserved */ ++ unsigned reserved13_15:3; ++ /** Rx Thr. Enable */ ++ unsigned rx_thr_en:1; ++ /** Rx Thr. Length */ ++ unsigned rx_thr_len:9; ++ unsigned reserved26:1; ++ /** Arbiter Parking Enable*/ ++ unsigned arbprken:1; ++ /** Reserved */ ++ unsigned reserved28_31:4; ++ } b; ++} dthrctl_data_t; ++ ++/** ++ * Device Logical IN Endpoint-Specific Registers. Offsets ++ * 900h-AFCh ++ * ++ * There will be one set of endpoint registers per logical endpoint ++ * implemented. ++ * ++ * These registers are visible only in Device mode and must not be ++ * accessed in Host mode, as the results are unknown. ++ */ ++typedef struct dwc_otg_dev_in_ep_regs { ++ /** Device IN Endpoint Control Register. Offset:900h + ++ * (ep_num * 20h) + 00h */ ++ volatile uint32_t diepctl; ++ /** Reserved. Offset:900h + (ep_num * 20h) + 04h */ ++ uint32_t reserved04; ++ /** Device IN Endpoint Interrupt Register. Offset:900h + ++ * (ep_num * 20h) + 08h */ ++ volatile uint32_t diepint; ++ /** Reserved. Offset:900h + (ep_num * 20h) + 0Ch */ ++ uint32_t reserved0C; ++ /** Device IN Endpoint Transfer Size ++ * Register. Offset:900h + (ep_num * 20h) + 10h */ ++ volatile uint32_t dieptsiz; ++ /** Device IN Endpoint DMA Address Register. Offset:900h + ++ * (ep_num * 20h) + 14h */ ++ volatile uint32_t diepdma; ++ /** Device IN Endpoint Transmit FIFO Status Register. Offset:900h + ++ * (ep_num * 20h) + 18h */ ++ volatile uint32_t dtxfsts; ++ /** Device IN Endpoint DMA Buffer Register. Offset:900h + ++ * (ep_num * 20h) + 1Ch */ ++ volatile uint32_t diepdmab; ++} dwc_otg_dev_in_ep_regs_t; ++ ++/** ++ * Device Logical OUT Endpoint-Specific Registers. Offsets: ++ * B00h-CFCh ++ * ++ * There will be one set of endpoint registers per logical endpoint ++ * implemented. ++ * ++ * These registers are visible only in Device mode and must not be ++ * accessed in Host mode, as the results are unknown. ++ */ ++typedef struct dwc_otg_dev_out_ep_regs { ++ /** Device OUT Endpoint Control Register. Offset:B00h + ++ * (ep_num * 20h) + 00h */ ++ volatile uint32_t doepctl; ++ /** Reserved. Offset:B00h + (ep_num * 20h) + 04h */ ++ uint32_t reserved04; ++ /** Device OUT Endpoint Interrupt Register. Offset:B00h + ++ * (ep_num * 20h) + 08h */ ++ volatile uint32_t doepint; ++ /** Reserved. Offset:B00h + (ep_num * 20h) + 0Ch */ ++ uint32_t reserved0C; ++ /** Device OUT Endpoint Transfer Size Register. Offset: ++ * B00h + (ep_num * 20h) + 10h */ ++ volatile uint32_t doeptsiz; ++ /** Device OUT Endpoint DMA Address Register. Offset:B00h ++ * + (ep_num * 20h) + 14h */ ++ volatile uint32_t doepdma; ++ /** Reserved. Offset:B00h + * (ep_num * 20h) + 18h */ ++ uint32_t unused; ++ /** Device OUT Endpoint DMA Buffer Register. Offset:B00h ++ * + (ep_num * 20h) + 1Ch */ ++ uint32_t doepdmab; ++} dwc_otg_dev_out_ep_regs_t; ++ ++/** ++ * This union represents the bit fields in the Device EP Control ++ * Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union depctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Maximum Packet Size ++ * IN/OUT EPn ++ * IN/OUT EP0 - 2 bits ++ * 2'b00: 64 Bytes ++ * 2'b01: 32 ++ * 2'b10: 16 ++ * 2'b11: 8 */ ++ unsigned mps:11; ++#define DWC_DEP0CTL_MPS_64 0 ++#define DWC_DEP0CTL_MPS_32 1 ++#define DWC_DEP0CTL_MPS_16 2 ++#define DWC_DEP0CTL_MPS_8 3 ++ ++ /** Next Endpoint ++ * IN EPn/IN EP0 ++ * OUT EPn/OUT EP0 - reserved */ ++ unsigned nextep:4; ++ ++ /** USB Active Endpoint */ ++ unsigned usbactep:1; ++ ++ /** Endpoint DPID (INTR/Bulk IN and OUT endpoints) ++ * This field contains the PID of the packet going to ++ * be received or transmitted on this endpoint. The ++ * application should program the PID of the first ++ * packet going to be received or transmitted on this ++ * endpoint , after the endpoint is ++ * activated. Application use the SetD1PID and ++ * SetD0PID fields of this register to program either ++ * D0 or D1 PID. ++ * ++ * The encoding for this field is ++ * - 0: D0 ++ * - 1: D1 ++ */ ++ unsigned dpid:1; ++ ++ /** NAK Status */ ++ unsigned naksts:1; ++ ++ /** Endpoint Type ++ * 2'b00: Control ++ * 2'b01: Isochronous ++ * 2'b10: Bulk ++ * 2'b11: Interrupt */ ++ unsigned eptype:2; ++ ++ /** Snoop Mode ++ * OUT EPn/OUT EP0 ++ * IN EPn/IN EP0 - reserved */ ++ unsigned snp:1; ++ ++ /** Stall Handshake */ ++ unsigned stall:1; ++ ++ /** Tx Fifo Number ++ * IN EPn/IN EP0 ++ * OUT EPn/OUT EP0 - reserved */ ++ unsigned txfnum:4; ++ ++ /** Clear NAK */ ++ unsigned cnak:1; ++ /** Set NAK */ ++ unsigned snak:1; ++ /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints) ++ * Writing to this field sets the Endpoint DPID (DPID) ++ * field in this register to DATA0. Set Even ++ * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints) ++ * Writing to this field sets the Even/Odd ++ * (micro)frame (EO_FrNum) field to even (micro) ++ * frame. ++ */ ++ unsigned setd0pid:1; ++ /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints) ++ * Writing to this field sets the Endpoint DPID (DPID) ++ * field in this register to DATA1 Set Odd ++ * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints) ++ * Writing to this field sets the Even/Odd ++ * (micro)frame (EO_FrNum) field to odd (micro) frame. ++ */ ++ unsigned setd1pid:1; ++ ++ /** Endpoint Disable */ ++ unsigned epdis:1; ++ /** Endpoint Enable */ ++ unsigned epena:1; ++ } b; ++} depctl_data_t; ++ ++/** ++ * This union represents the bit fields in the Device EP Transfer ++ * Size Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union deptsiz_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer size */ ++ unsigned xfersize:19; ++/** Max packet count for EP (pow(2,10)-1) */ ++#define MAX_PKT_CNT 1023 ++ /** Packet Count */ ++ unsigned pktcnt:10; ++ /** Multi Count - Periodic IN endpoints */ ++ unsigned mc:2; ++ unsigned reserved:1; ++ } b; ++} deptsiz_data_t; ++ ++/** ++ * This union represents the bit fields in the Device EP 0 Transfer ++ * Size Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union deptsiz0_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer size */ ++ unsigned xfersize:7; ++ /** Reserved */ ++ unsigned reserved7_18:12; ++ /** Packet Count */ ++ unsigned pktcnt:2; ++ /** Reserved */ ++ unsigned reserved21_28:8; ++ /**Setup Packet Count (DOEPTSIZ0 Only) */ ++ unsigned supcnt:2; ++ unsigned reserved31; ++ } b; ++} deptsiz0_data_t; ++ ++///////////////////////////////////////////////// ++// DMA Descriptor Specific Structures ++// ++ ++/** Buffer status definitions */ ++ ++#define BS_HOST_READY 0x0 ++#define BS_DMA_BUSY 0x1 ++#define BS_DMA_DONE 0x2 ++#define BS_HOST_BUSY 0x3 ++ ++/** Receive/Transmit status definitions */ ++ ++#define RTS_SUCCESS 0x0 ++#define RTS_BUFFLUSH 0x1 ++#define RTS_RESERVED 0x2 ++#define RTS_BUFERR 0x3 ++ ++/** ++ * This union represents the bit fields in the DMA Descriptor ++ * status quadlet. Read the quadlet into the d32 member then ++ * set/clear the bits using the bit, b_iso_out and ++ * b_iso_in elements. ++ */ ++typedef union dev_dma_desc_sts { ++ /** raw register data */ ++ uint32_t d32; ++ /** quadlet bits */ ++ struct { ++ /** Received number of bytes */ ++ unsigned bytes:16; ++ /** NAK bit - only for OUT EPs */ ++ unsigned nak:1; ++ unsigned reserved17_22:6; ++ /** Multiple Transfer - only for OUT EPs */ ++ unsigned mtrf:1; ++ /** Setup Packet received - only for OUT EPs */ ++ unsigned sr:1; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ /** Short Packet */ ++ unsigned sp:1; ++ /** Last */ ++ unsigned l:1; ++ /** Receive Status */ ++ unsigned sts:2; ++ /** Buffer Status */ ++ unsigned bs:2; ++ } b; ++ ++//#ifdef DWC_EN_ISOC ++ /** iso out quadlet bits */ ++ struct { ++ /** Received number of bytes */ ++ unsigned rxbytes:11; ++ ++ unsigned reserved11:1; ++ /** Frame Number */ ++ unsigned framenum:11; ++ /** Received ISO Data PID */ ++ unsigned pid:2; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ /** Short Packet */ ++ unsigned sp:1; ++ /** Last */ ++ unsigned l:1; ++ /** Receive Status */ ++ unsigned rxsts:2; ++ /** Buffer Status */ ++ unsigned bs:2; ++ } b_iso_out; ++ ++ /** iso in quadlet bits */ ++ struct { ++ /** Transmited number of bytes */ ++ unsigned txbytes:12; ++ /** Frame Number */ ++ unsigned framenum:11; ++ /** Transmited ISO Data PID */ ++ unsigned pid:2; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ /** Short Packet */ ++ unsigned sp:1; ++ /** Last */ ++ unsigned l:1; ++ /** Transmit Status */ ++ unsigned txsts:2; ++ /** Buffer Status */ ++ unsigned bs:2; ++ } b_iso_in; ++//#endif /* DWC_EN_ISOC */ ++} dev_dma_desc_sts_t; ++ ++/** ++ * DMA Descriptor structure ++ * ++ * DMA Descriptor structure contains two quadlets: ++ * Status quadlet and Data buffer pointer. ++ */ ++typedef struct dwc_otg_dev_dma_desc { ++ /** DMA Descriptor status quadlet */ ++ dev_dma_desc_sts_t status; ++ /** DMA Descriptor data buffer pointer */ ++ uint32_t buf; ++} dwc_otg_dev_dma_desc_t; ++ ++/** ++ * The dwc_otg_dev_if structure contains information needed to manage ++ * the DWC_otg controller acting in device mode. It represents the ++ * programming view of the device-specific aspects of the controller. ++ */ ++typedef struct dwc_otg_dev_if { ++ /** Pointer to device Global registers. ++ * Device Global Registers starting at offset 800h ++ */ ++ dwc_otg_device_global_regs_t *dev_global_regs; ++#define DWC_DEV_GLOBAL_REG_OFFSET 0x800 ++ ++ /** ++ * Device Logical IN Endpoint-Specific Registers 900h-AFCh ++ */ ++ dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS]; ++#define DWC_DEV_IN_EP_REG_OFFSET 0x900 ++#define DWC_EP_REG_OFFSET 0x20 ++ ++ /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */ ++ dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS]; ++#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00 ++ ++ /* Device configuration information */ ++ uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */ ++ uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */ ++ uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/ ++ ++ /** Size of periodic FIFOs (Bytes) */ ++ uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS]; ++ ++ /** Size of Tx FIFOs (Bytes) */ ++ uint16_t tx_fifo_size[MAX_TX_FIFOS]; ++ ++ /** Thresholding enable flags and length varaiables **/ ++ uint16_t rx_thr_en; ++ uint16_t iso_tx_thr_en; ++ uint16_t non_iso_tx_thr_en; ++ ++ uint16_t rx_thr_length; ++ uint16_t tx_thr_length; ++ ++ /** ++ * Pointers to the DMA Descriptors for EP0 Control ++ * transfers (virtual and physical) ++ */ ++ ++ /** 2 descriptors for SETUP packets */ ++ dwc_dma_t dma_setup_desc_addr[2]; ++ dwc_otg_dev_dma_desc_t *setup_desc_addr[2]; ++ ++ /** Pointer to Descriptor with latest SETUP packet */ ++ dwc_otg_dev_dma_desc_t *psetup; ++ ++ /** Index of current SETUP handler descriptor */ ++ uint32_t setup_desc_index; ++ ++ /** Descriptor for Data In or Status In phases */ ++ dwc_dma_t dma_in_desc_addr; ++ dwc_otg_dev_dma_desc_t *in_desc_addr; ++ ++ /** Descriptor for Data Out or Status Out phases */ ++ dwc_dma_t dma_out_desc_addr; ++ dwc_otg_dev_dma_desc_t *out_desc_addr; ++ ++ /** Setup Packet Detected - if set clear NAK when queueing */ ++ uint32_t spd; ++ /** Isoc ep pointer on which incomplete happens */ ++ void *isoc_ep; ++ ++} dwc_otg_dev_if_t; ++ ++///////////////////////////////////////////////// ++// Host Mode Register Structures ++// ++/** ++ * The Host Global Registers structure defines the size and relative ++ * field offsets for the Host Mode Global Registers. Host Global ++ * Registers offsets 400h-7FFh. ++*/ ++typedef struct dwc_otg_host_global_regs { ++ /** Host Configuration Register. Offset: 400h */ ++ volatile uint32_t hcfg; ++ /** Host Frame Interval Register. Offset: 404h */ ++ volatile uint32_t hfir; ++ /** Host Frame Number / Frame Remaining Register. Offset: 408h */ ++ volatile uint32_t hfnum; ++ /** Reserved. Offset: 40Ch */ ++ uint32_t reserved40C; ++ /** Host Periodic Transmit FIFO/ Queue Status Register. Offset: 410h */ ++ volatile uint32_t hptxsts; ++ /** Host All Channels Interrupt Register. Offset: 414h */ ++ volatile uint32_t haint; ++ /** Host All Channels Interrupt Mask Register. Offset: 418h */ ++ volatile uint32_t haintmsk; ++ /** Host Frame List Base Address Register . Offset: 41Ch */ ++ volatile uint32_t hflbaddr; ++} dwc_otg_host_global_regs_t; ++ ++/** ++ * This union represents the bit fields in the Host Configuration Register. ++ * Read the register into the d32 member then set/clear the bits using ++ * the bit elements. Write the d32 member to the hcfg register. ++ */ ++typedef union hcfg_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** FS/LS Phy Clock Select */ ++ unsigned fslspclksel:2; ++#define DWC_HCFG_30_60_MHZ 0 ++#define DWC_HCFG_48_MHZ 1 ++#define DWC_HCFG_6_MHZ 2 ++ ++ /** FS/LS Only Support */ ++ unsigned fslssupp:1; ++ unsigned reserved3_6:4; ++ /** Enable 32-KHz Suspend Mode */ ++ unsigned ena32khzs:1; ++ /** Resume Validation Periiod */ ++ unsigned resvalid:8; ++ unsigned reserved16_22:7; ++ /** Enable Scatter/gather DMA in Host mode */ ++ unsigned descdma:1; ++ /** Frame List Entries */ ++ unsigned frlisten:2; ++ /** Enable Periodic Scheduling */ ++ unsigned perschedena:1; ++ unsigned reserved27_30:4; ++ unsigned modechtimen:1; ++ } b; ++} hcfg_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Frame Remaing/Number ++ * Register. ++ */ ++typedef union hfir_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ unsigned frint:16; ++ unsigned hfirrldctrl:1; ++ unsigned reserved:15; ++ } b; ++} hfir_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Frame Remaing/Number ++ * Register. ++ */ ++typedef union hfnum_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ unsigned frnum:16; ++#define DWC_HFNUM_MAX_FRNUM 0x3FFF ++ unsigned frrem:16; ++ } b; ++} hfnum_data_t; ++ ++typedef union hptxsts_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ unsigned ptxfspcavail:16; ++ unsigned ptxqspcavail:8; ++ /** Top of the Periodic Transmit Request Queue ++ * - bit 24 - Terminate (last entry for the selected channel) ++ * - bits 26:25 - Token Type ++ * - 2'b00 - Zero length ++ * - 2'b01 - Ping ++ * - 2'b10 - Disable ++ * - bits 30:27 - Channel Number ++ * - bit 31 - Odd/even microframe ++ */ ++ unsigned ptxqtop_terminate:1; ++ unsigned ptxqtop_token:2; ++ unsigned ptxqtop_chnum:4; ++ unsigned ptxqtop_odd:1; ++ } b; ++} hptxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Port Control and Status ++ * Register. Read the register into the d32 member then set/clear the ++ * bits using the bit elements. Write the d32 member to the ++ * hprt0 register. ++ */ ++typedef union hprt0_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned prtconnsts:1; ++ unsigned prtconndet:1; ++ unsigned prtena:1; ++ unsigned prtenchng:1; ++ unsigned prtovrcurract:1; ++ unsigned prtovrcurrchng:1; ++ unsigned prtres:1; ++ unsigned prtsusp:1; ++ unsigned prtrst:1; ++ unsigned reserved9:1; ++ unsigned prtlnsts:2; ++ unsigned prtpwr:1; ++ unsigned prttstctl:4; ++ unsigned prtspd:2; ++#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0 ++#define DWC_HPRT0_PRTSPD_FULL_SPEED 1 ++#define DWC_HPRT0_PRTSPD_LOW_SPEED 2 ++ unsigned reserved19_31:13; ++ } b; ++} hprt0_data_t; ++ ++/** ++ * This union represents the bit fields in the Host All Interrupt ++ * Register. ++ */ ++typedef union haint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned ch0:1; ++ unsigned ch1:1; ++ unsigned ch2:1; ++ unsigned ch3:1; ++ unsigned ch4:1; ++ unsigned ch5:1; ++ unsigned ch6:1; ++ unsigned ch7:1; ++ unsigned ch8:1; ++ unsigned ch9:1; ++ unsigned ch10:1; ++ unsigned ch11:1; ++ unsigned ch12:1; ++ unsigned ch13:1; ++ unsigned ch14:1; ++ unsigned ch15:1; ++ unsigned reserved:16; ++ } b; ++ ++ struct { ++ unsigned chint:16; ++ unsigned reserved:16; ++ } b2; ++} haint_data_t; ++ ++/** ++ * This union represents the bit fields in the Host All Interrupt ++ * Register. ++ */ ++typedef union haintmsk_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned ch0:1; ++ unsigned ch1:1; ++ unsigned ch2:1; ++ unsigned ch3:1; ++ unsigned ch4:1; ++ unsigned ch5:1; ++ unsigned ch6:1; ++ unsigned ch7:1; ++ unsigned ch8:1; ++ unsigned ch9:1; ++ unsigned ch10:1; ++ unsigned ch11:1; ++ unsigned ch12:1; ++ unsigned ch13:1; ++ unsigned ch14:1; ++ unsigned ch15:1; ++ unsigned reserved:16; ++ } b; ++ ++ struct { ++ unsigned chint:16; ++ unsigned reserved:16; ++ } b2; ++} haintmsk_data_t; ++ ++/** ++ * Host Channel Specific Registers. 500h-5FCh ++ */ ++typedef struct dwc_otg_hc_regs { ++ /** Host Channel 0 Characteristic Register. Offset: 500h + (chan_num * 20h) + 00h */ ++ volatile uint32_t hcchar; ++ /** Host Channel 0 Split Control Register. Offset: 500h + (chan_num * 20h) + 04h */ ++ volatile uint32_t hcsplt; ++ /** Host Channel 0 Interrupt Register. Offset: 500h + (chan_num * 20h) + 08h */ ++ volatile uint32_t hcint; ++ /** Host Channel 0 Interrupt Mask Register. Offset: 500h + (chan_num * 20h) + 0Ch */ ++ volatile uint32_t hcintmsk; ++ /** Host Channel 0 Transfer Size Register. Offset: 500h + (chan_num * 20h) + 10h */ ++ volatile uint32_t hctsiz; ++ /** Host Channel 0 DMA Address Register. Offset: 500h + (chan_num * 20h) + 14h */ ++ volatile uint32_t hcdma; ++ volatile uint32_t reserved; ++ /** Host Channel 0 DMA Buffer Address Register. Offset: 500h + (chan_num * 20h) + 1Ch */ ++ volatile uint32_t hcdmab; ++} dwc_otg_hc_regs_t; ++ ++/** ++ * This union represents the bit fields in the Host Channel Characteristics ++ * Register. Read the register into the d32 member then set/clear the ++ * bits using the bit elements. Write the d32 member to the ++ * hcchar register. ++ */ ++typedef union hcchar_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** Maximum packet size in bytes */ ++ unsigned mps:11; ++ ++ /** Endpoint number */ ++ unsigned epnum:4; ++ ++ /** 0: OUT, 1: IN */ ++ unsigned epdir:1; ++ ++ unsigned reserved:1; ++ ++ /** 0: Full/high speed device, 1: Low speed device */ ++ unsigned lspddev:1; ++ ++ /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */ ++ unsigned eptype:2; ++ ++ /** Packets per frame for periodic transfers. 0 is reserved. */ ++ unsigned multicnt:2; ++ ++ /** Device address */ ++ unsigned devaddr:7; ++ ++ /** ++ * Frame to transmit periodic transaction. ++ * 0: even, 1: odd ++ */ ++ unsigned oddfrm:1; ++ ++ /** Channel disable */ ++ unsigned chdis:1; ++ ++ /** Channel enable */ ++ unsigned chen:1; ++ } b; ++} hcchar_data_t; ++ ++typedef union hcsplt_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** Port Address */ ++ unsigned prtaddr:7; ++ ++ /** Hub Address */ ++ unsigned hubaddr:7; ++ ++ /** Transaction Position */ ++ unsigned xactpos:2; ++#define DWC_HCSPLIT_XACTPOS_MID 0 ++#define DWC_HCSPLIT_XACTPOS_END 1 ++#define DWC_HCSPLIT_XACTPOS_BEGIN 2 ++#define DWC_HCSPLIT_XACTPOS_ALL 3 ++ ++ /** Do Complete Split */ ++ unsigned compsplt:1; ++ ++ /** Reserved */ ++ unsigned reserved:14; ++ ++ /** Split Enble */ ++ unsigned spltena:1; ++ } b; ++} hcsplt_data_t; ++ ++/** ++ * This union represents the bit fields in the Host All Interrupt ++ * Register. ++ */ ++typedef union hcint_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer Complete */ ++ unsigned xfercomp:1; ++ /** Channel Halted */ ++ unsigned chhltd:1; ++ /** AHB Error */ ++ unsigned ahberr:1; ++ /** STALL Response Received */ ++ unsigned stall:1; ++ /** NAK Response Received */ ++ unsigned nak:1; ++ /** ACK Response Received */ ++ unsigned ack:1; ++ /** NYET Response Received */ ++ unsigned nyet:1; ++ /** Transaction Err */ ++ unsigned xacterr:1; ++ /** Babble Error */ ++ unsigned bblerr:1; ++ /** Frame Overrun */ ++ unsigned frmovrun:1; ++ /** Data Toggle Error */ ++ unsigned datatglerr:1; ++ /** Buffer Not Available (only for DDMA mode) */ ++ unsigned bna:1; ++ /** Exessive transaction error (only for DDMA mode) */ ++ unsigned xcs_xact:1; ++ /** Frame List Rollover interrupt */ ++ unsigned frm_list_roll:1; ++ /** Reserved */ ++ unsigned reserved14_31:18; ++ } b; ++} hcint_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Channel Interrupt Mask ++ * Register. Read the register into the d32 member then set/clear the ++ * bits using the bit elements. Write the d32 member to the ++ * hcintmsk register. ++ */ ++typedef union hcintmsk_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ unsigned xfercompl:1; ++ unsigned chhltd:1; ++ unsigned ahberr:1; ++ unsigned stall:1; ++ unsigned nak:1; ++ unsigned ack:1; ++ unsigned nyet:1; ++ unsigned xacterr:1; ++ unsigned bblerr:1; ++ unsigned frmovrun:1; ++ unsigned datatglerr:1; ++ unsigned bna:1; ++ unsigned xcs_xact:1; ++ unsigned frm_list_roll:1; ++ unsigned reserved14_31:18; ++ } b; ++} hcintmsk_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Channel Transfer Size ++ * Register. Read the register into the d32 member then set/clear the ++ * bits using the bit elements. Write the d32 member to the ++ * hcchar register. ++ */ ++ ++typedef union hctsiz_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** Total transfer size in bytes */ ++ unsigned xfersize:19; ++ ++ /** Data packets to transfer */ ++ unsigned pktcnt:10; ++ ++ /** ++ * Packet ID for next data packet ++ * 0: DATA0 ++ * 1: DATA2 ++ * 2: DATA1 ++ * 3: MDATA (non-Control), SETUP (Control) ++ */ ++ unsigned pid:2; ++#define DWC_HCTSIZ_DATA0 0 ++#define DWC_HCTSIZ_DATA1 2 ++#define DWC_HCTSIZ_DATA2 1 ++#define DWC_HCTSIZ_MDATA 3 ++#define DWC_HCTSIZ_SETUP 3 ++ ++ /** Do PING protocol when 1 */ ++ unsigned dopng:1; ++ } b; ++ ++ /** register bits */ ++ struct { ++ /** Scheduling information */ ++ unsigned schinfo:8; ++ ++ /** Number of transfer descriptors. ++ * Max value: ++ * 64 in general, ++ * 256 only for HS isochronous endpoint. ++ */ ++ unsigned ntd:8; ++ ++ /** Data packets to transfer */ ++ unsigned reserved16_28:13; ++ ++ /** ++ * Packet ID for next data packet ++ * 0: DATA0 ++ * 1: DATA2 ++ * 2: DATA1 ++ * 3: MDATA (non-Control) ++ */ ++ unsigned pid:2; ++ ++ /** Do PING protocol when 1 */ ++ unsigned dopng:1; ++ } b_ddma; ++} hctsiz_data_t; ++ ++/** ++ * This union represents the bit fields in the Host DMA Address ++ * Register used in Descriptor DMA mode. ++ */ ++typedef union hcdma_data { ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ unsigned reserved0_2:3; ++ /** Current Transfer Descriptor. Not used for ISOC */ ++ unsigned ctd:8; ++ /** Start Address of Descriptor List */ ++ unsigned dma_addr:21; ++ } b; ++} hcdma_data_t; ++ ++/** ++ * This union represents the bit fields in the DMA Descriptor ++ * status quadlet for host mode. Read the quadlet into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union host_dma_desc_sts { ++ /** raw register data */ ++ uint32_t d32; ++ /** quadlet bits */ ++ ++ /* for non-isochronous */ ++ struct { ++ /** Number of bytes */ ++ unsigned n_bytes:17; ++ /** QTD offset to jump when Short Packet received - only for IN EPs */ ++ unsigned qtd_offset:6; ++ /** ++ * Set to request the core to jump to alternate QTD if ++ * Short Packet received - only for IN EPs ++ */ ++ unsigned a_qtd:1; ++ /** ++ * Setup Packet bit. When set indicates that buffer contains ++ * setup packet. ++ */ ++ unsigned sup:1; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ /** End of List */ ++ unsigned eol:1; ++ unsigned reserved27:1; ++ /** Rx/Tx Status */ ++ unsigned sts:2; ++#define DMA_DESC_STS_PKTERR 1 ++ unsigned reserved30:1; ++ /** Active Bit */ ++ unsigned a:1; ++ } b; ++ /* for isochronous */ ++ struct { ++ /** Number of bytes */ ++ unsigned n_bytes:12; ++ unsigned reserved12_24:13; ++ /** Interrupt On Complete */ ++ unsigned ioc:1; ++ unsigned reserved26_27:2; ++ /** Rx/Tx Status */ ++ unsigned sts:2; ++ unsigned reserved30:1; ++ /** Active Bit */ ++ unsigned a:1; ++ } b_isoc; ++} host_dma_desc_sts_t; ++ ++#define MAX_DMA_DESC_SIZE 131071 ++#define MAX_DMA_DESC_NUM_GENERIC 64 ++#define MAX_DMA_DESC_NUM_HS_ISOC 256 ++#define MAX_FRLIST_EN_NUM 64 ++/** ++ * Host-mode DMA Descriptor structure ++ * ++ * DMA Descriptor structure contains two quadlets: ++ * Status quadlet and Data buffer pointer. ++ */ ++typedef struct dwc_otg_host_dma_desc { ++ /** DMA Descriptor status quadlet */ ++ host_dma_desc_sts_t status; ++ /** DMA Descriptor data buffer pointer */ ++ uint32_t buf; ++} dwc_otg_host_dma_desc_t; ++ ++/** OTG Host Interface Structure. ++ * ++ * The OTG Host Interface Structure structure contains information ++ * needed to manage the DWC_otg controller acting in host mode. It ++ * represents the programming view of the host-specific aspects of the ++ * controller. ++ */ ++typedef struct dwc_otg_host_if { ++ /** Host Global Registers starting at offset 400h.*/ ++ dwc_otg_host_global_regs_t *host_global_regs; ++#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400 ++ ++ /** Host Port 0 Control and Status Register */ ++ volatile uint32_t *hprt0; ++#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440 ++ ++ /** Host Channel Specific Registers at offsets 500h-5FCh. */ ++ dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS]; ++#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500 ++#define DWC_OTG_CHAN_REGS_OFFSET 0x20 ++ ++ /* Host configuration information */ ++ /** Number of Host Channels (range: 1-16) */ ++ uint8_t num_host_channels; ++ /** Periodic EPs supported (0: no, 1: yes) */ ++ uint8_t perio_eps_supported; ++ /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */ ++ uint16_t perio_tx_fifo_size; ++ ++} dwc_otg_host_if_t; ++ ++/** ++ * This union represents the bit fields in the Power and Clock Gating Control ++ * Register. Read the register into the d32 member then set/clear the ++ * bits using the bit elements. ++ */ ++typedef union pcgcctl_data { ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** Stop Pclk */ ++ unsigned stoppclk:1; ++ /** Gate Hclk */ ++ unsigned gatehclk:1; ++ /** Power Clamp */ ++ unsigned pwrclmp:1; ++ /** Reset Power Down Modules */ ++ unsigned rstpdwnmodule:1; ++ /** Reserved */ ++ unsigned reserved:1; ++ /** Enable Sleep Clock Gating (Enbl_L1Gating) */ ++ unsigned enbl_sleep_gating:1; ++ /** PHY In Sleep (PhySleep) */ ++ unsigned phy_in_sleep:1; ++ /** Deep Sleep*/ ++ unsigned deep_sleep:1; ++ unsigned resetaftsusp:1; ++ unsigned restoremode:1; ++ unsigned enbl_extnd_hiber:1; ++ unsigned extnd_hiber_pwrclmp:1; ++ unsigned extnd_hiber_switch:1; ++ unsigned ess_reg_restored:1; ++ unsigned prt_clk_sel:2; ++ unsigned port_power:1; ++ unsigned max_xcvrselect:2; ++ unsigned max_termsel:1; ++ unsigned mac_dev_addr:7; ++ unsigned p2hd_dev_enum_spd:2; ++ unsigned p2hd_prt_spd:2; ++ unsigned if_dev_mode:1; ++ } b; ++} pcgcctl_data_t; ++ ++/** ++ * This union represents the bit fields in the Global Data FIFO Software ++ * Configuration Register. Read the register into the d32 member then ++ * set/clear the bits using the bit elements. ++ */ ++typedef union gdfifocfg_data { ++ /* raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** OTG Data FIFO depth */ ++ unsigned gdfifocfg:16; ++ /** Start address of EP info controller */ ++ unsigned epinfobase:16; ++ } b; ++} gdfifocfg_data_t; ++ ++/** ++ * This union represents the bit fields in the Global Power Down Register ++ * Register. Read the register into the d32 member then set/clear the ++ * bits using the bit elements. ++ */ ++typedef union gpwrdn_data { ++ /* raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct { ++ /** PMU Interrupt Select */ ++ unsigned pmuintsel:1; ++ /** PMU Active */ ++ unsigned pmuactv:1; ++ /** Restore */ ++ unsigned restore:1; ++ /** Power Down Clamp */ ++ unsigned pwrdnclmp:1; ++ /** Power Down Reset */ ++ unsigned pwrdnrstn:1; ++ /** Power Down Switch */ ++ unsigned pwrdnswtch:1; ++ /** Disable VBUS */ ++ unsigned dis_vbus:1; ++ /** Line State Change */ ++ unsigned lnstschng:1; ++ /** Line state change mask */ ++ unsigned lnstchng_msk:1; ++ /** Reset Detected */ ++ unsigned rst_det:1; ++ /** Reset Detect mask */ ++ unsigned rst_det_msk:1; ++ /** Disconnect Detected */ ++ unsigned disconn_det:1; ++ /** Disconnect Detect mask */ ++ unsigned disconn_det_msk:1; ++ /** Connect Detected*/ ++ unsigned connect_det:1; ++ /** Connect Detected Mask*/ ++ unsigned connect_det_msk:1; ++ /** SRP Detected */ ++ unsigned srp_det:1; ++ /** SRP Detect mask */ ++ unsigned srp_det_msk:1; ++ /** Status Change Interrupt */ ++ unsigned sts_chngint:1; ++ /** Status Change Interrupt Mask */ ++ unsigned sts_chngint_msk:1; ++ /** Line State */ ++ unsigned linestate:2; ++ /** Indicates current mode(status of IDDIG signal) */ ++ unsigned idsts:1; ++ /** B Session Valid signal status*/ ++ unsigned bsessvld:1; ++ /** ADP Event Detected */ ++ unsigned adp_int:1; ++ /** Multi Valued ID pin */ ++ unsigned mult_val_id_bc:5; ++ /** Reserved 24_31 */ ++ unsigned reserved29_31:3; ++ } b; ++} gpwrdn_data_t; ++ ++#endif +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/test/Makefile +@@ -0,0 +1,16 @@ ++ ++PERL=/usr/bin/perl ++PL_TESTS=test_sysfs.pl test_mod_param.pl ++ ++.PHONY : test ++test : perl_tests ++ ++perl_tests : ++ @echo ++ @echo Running perl tests ++ @for test in $(PL_TESTS); do \ ++ if $(PERL) ./$$test ; then \ ++ echo "=======> $$test, PASSED" ; \ ++ else echo "=======> $$test, FAILED" ; \ ++ fi \ ++ done +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm +@@ -0,0 +1,337 @@ ++package dwc_otg_test; ++ ++use strict; ++use Exporter (); ++ ++use vars qw(@ISA @EXPORT ++$sysfsdir $paramdir $errors $params ++); ++ ++@ISA = qw(Exporter); ++ ++# ++# Globals ++# ++$sysfsdir = "/sys/devices/lm0"; ++$paramdir = "/sys/module/dwc_otg"; ++$errors = 0; ++ ++$params = [ ++ { ++ NAME => "otg_cap", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 2 ++ }, ++ { ++ NAME => "dma_enable", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "dma_burst_size", ++ DEFAULT => 32, ++ ENUM => [1, 4, 8, 16, 32, 64, 128, 256], ++ LOW => 1, ++ HIGH => 256 ++ }, ++ { ++ NAME => "host_speed", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "host_support_fs_ls_low_power", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "host_ls_low_power_phy_clk", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "dev_speed", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "enable_dynamic_fifo", ++ DEFAULT => 1, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ { ++ NAME => "data_fifo_size", ++ DEFAULT => 8192, ++ ENUM => [], ++ LOW => 32, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "dev_rx_fifo_size", ++ DEFAULT => 1064, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "dev_nperio_tx_fifo_size", ++ DEFAULT => 1024, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_1", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_2", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_3", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_4", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_5", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_6", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_7", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_8", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_9", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_10", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_11", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_12", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_13", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_14", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "dev_perio_tx_fifo_size_15", ++ DEFAULT => 256, ++ ENUM => [], ++ LOW => 4, ++ HIGH => 768 ++ }, ++ { ++ NAME => "host_rx_fifo_size", ++ DEFAULT => 1024, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "host_nperio_tx_fifo_size", ++ DEFAULT => 1024, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "host_perio_tx_fifo_size", ++ DEFAULT => 1024, ++ ENUM => [], ++ LOW => 16, ++ HIGH => 32768 ++ }, ++ { ++ NAME => "max_transfer_size", ++ DEFAULT => 65535, ++ ENUM => [], ++ LOW => 2047, ++ HIGH => 65535 ++ }, ++ { ++ NAME => "max_packet_count", ++ DEFAULT => 511, ++ ENUM => [], ++ LOW => 15, ++ HIGH => 511 ++ }, ++ { ++ NAME => "host_channels", ++ DEFAULT => 12, ++ ENUM => [], ++ LOW => 1, ++ HIGH => 16 ++ }, ++ { ++ NAME => "dev_endpoints", ++ DEFAULT => 6, ++ ENUM => [], ++ LOW => 1, ++ HIGH => 15 ++ }, ++ { ++ NAME => "phy_type", ++ DEFAULT => 1, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 2 ++ }, ++ { ++ NAME => "phy_utmi_width", ++ DEFAULT => 16, ++ ENUM => [8, 16], ++ LOW => 8, ++ HIGH => 16 ++ }, ++ { ++ NAME => "phy_ulpi_ddr", ++ DEFAULT => 0, ++ ENUM => [], ++ LOW => 0, ++ HIGH => 1 ++ }, ++ ]; ++ ++ ++# ++# ++sub check_arch { ++ $_ = `uname -m`; ++ chomp; ++ unless (m/armv4tl/) { ++ warn "# \n# Can't execute on $_. Run on integrator platform.\n# \n"; ++ return 0; ++ } ++ return 1; ++} ++ ++# ++# ++sub load_module { ++ my $params = shift; ++ print "\nRemoving Module\n"; ++ system "rmmod dwc_otg"; ++ print "Loading Module\n"; ++ if ($params ne "") { ++ print "Module Parameters: $params\n"; ++ } ++ if (system("modprobe dwc_otg $params")) { ++ warn "Unable to load module\n"; ++ return 0; ++ } ++ return 1; ++} ++ ++# ++# ++sub test_status { ++ my $arg = shift; ++ ++ print "\n"; ++ ++ if (defined $arg) { ++ warn "WARNING: $arg\n"; ++ } ++ ++ if ($errors > 0) { ++ warn "TEST FAILED with $errors errors\n"; ++ return 0; ++ } else { ++ print "TEST PASSED\n"; ++ return 0 if (defined $arg); ++ } ++ return 1; ++} ++ ++# ++# ++@EXPORT = qw( ++$sysfsdir ++$paramdir ++$params ++$errors ++check_arch ++load_module ++test_status ++); ++ ++1; +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/test/test_mod_param.pl +@@ -0,0 +1,133 @@ ++#!/usr/bin/perl -w ++# ++# Run this program on the integrator. ++# ++# - Tests module parameter default values. ++# - Tests setting of valid module parameter values via modprobe. ++# - Tests invalid module parameter values. ++# ----------------------------------------------------------------------------- ++use strict; ++use dwc_otg_test; ++ ++check_arch() or die; ++ ++# ++# ++sub test { ++ my ($param,$expected) = @_; ++ my $value = get($param); ++ ++ if ($value == $expected) { ++ print "$param = $value, okay\n"; ++ } ++ ++ else { ++ warn "ERROR: value of $param != $expected, $value\n"; ++ $errors ++; ++ } ++} ++ ++# ++# ++sub get { ++ my $param = shift; ++ my $tmp = `cat $paramdir/$param`; ++ chomp $tmp; ++ return $tmp; ++} ++ ++# ++# ++sub test_main { ++ ++ print "\nTesting Module Parameters\n"; ++ ++ load_module("") or die; ++ ++ # Test initial values ++ print "\nTesting Default Values\n"; ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{DEFAULT}); ++ } ++ ++ # Test low value ++ print "\nTesting Low Value\n"; ++ my $cmd_params = ""; ++ foreach (@{$params}) { ++ $cmd_params = $cmd_params . "$_->{NAME}=$_->{LOW} "; ++ } ++ load_module($cmd_params) or die; ++ ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{LOW}); ++ } ++ ++ # Test high value ++ print "\nTesting High Value\n"; ++ $cmd_params = ""; ++ foreach (@{$params}) { ++ $cmd_params = $cmd_params . "$_->{NAME}=$_->{HIGH} "; ++ } ++ load_module($cmd_params) or die; ++ ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{HIGH}); ++ } ++ ++ # Test Enum ++ print "\nTesting Enumerated\n"; ++ foreach (@{$params}) { ++ if (defined $_->{ENUM}) { ++ my $value; ++ foreach $value (@{$_->{ENUM}}) { ++ $cmd_params = "$_->{NAME}=$value"; ++ load_module($cmd_params) or die; ++ test ($_->{NAME}, $value); ++ } ++ } ++ } ++ ++ # Test Invalid Values ++ print "\nTesting Invalid Values\n"; ++ $cmd_params = ""; ++ foreach (@{$params}) { ++ $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{LOW}-1; ++ } ++ load_module($cmd_params) or die; ++ ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{DEFAULT}); ++ } ++ ++ $cmd_params = ""; ++ foreach (@{$params}) { ++ $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{HIGH}+1; ++ } ++ load_module($cmd_params) or die; ++ ++ foreach (@{$params}) { ++ test ($_->{NAME}, $_->{DEFAULT}); ++ } ++ ++ print "\nTesting Enumerated\n"; ++ foreach (@{$params}) { ++ if (defined $_->{ENUM}) { ++ my $value; ++ foreach $value (@{$_->{ENUM}}) { ++ $value = $value + 1; ++ $cmd_params = "$_->{NAME}=$value"; ++ load_module($cmd_params) or die; ++ test ($_->{NAME}, $_->{DEFAULT}); ++ $value = $value - 2; ++ $cmd_params = "$_->{NAME}=$value"; ++ load_module($cmd_params) or die; ++ test ($_->{NAME}, $_->{DEFAULT}); ++ } ++ } ++ } ++ ++ test_status() or die; ++} ++ ++test_main(); ++0; +--- /dev/null ++++ b/drivers/usb/host/dwc_otg/test/test_sysfs.pl +@@ -0,0 +1,193 @@ ++#!/usr/bin/perl -w ++# ++# Run this program on the integrator ++# - Tests select sysfs attributes. ++# - Todo ... test more attributes, hnp/srp, buspower/bussuspend, etc. ++# ----------------------------------------------------------------------------- ++use strict; ++use dwc_otg_test; ++ ++check_arch() or die; ++ ++# ++# ++sub test { ++ my ($attr,$expected) = @_; ++ my $string = get($attr); ++ ++ if ($string eq $expected) { ++ printf("$attr = $string, okay\n"); ++ } ++ else { ++ warn "ERROR: value of $attr != $expected, $string\n"; ++ $errors ++; ++ } ++} ++ ++# ++# ++sub set { ++ my ($reg, $value) = @_; ++ system "echo $value > $sysfsdir/$reg"; ++} ++ ++# ++# ++sub get { ++ my $attr = shift; ++ my $string = `cat $sysfsdir/$attr`; ++ chomp $string; ++ if ($string =~ m/\s\=\s/) { ++ my $tmp; ++ ($tmp, $string) = split /\s=\s/, $string; ++ } ++ return $string; ++} ++ ++# ++# ++sub test_main { ++ print("\nTesting Sysfs Attributes\n"); ++ ++ load_module("") or die; ++ ++ # Test initial values of regoffset/regvalue/guid/gsnpsid ++ print("\nTesting Default Values\n"); ++ ++ test("regoffset", "0xffffffff"); ++ test("regvalue", "invalid offset"); ++ test("guid", "0x12345678"); # this will fail if it has been changed ++ test("gsnpsid", "0x4f54200a"); ++ ++ # Test operation of regoffset/regvalue ++ print("\nTesting regoffset\n"); ++ set('regoffset', '5a5a5a5a'); ++ test("regoffset", "0xffffffff"); ++ ++ set('regoffset', '0'); ++ test("regoffset", "0x00000000"); ++ ++ set('regoffset', '40000'); ++ test("regoffset", "0x00000000"); ++ ++ set('regoffset', '3ffff'); ++ test("regoffset", "0x0003ffff"); ++ ++ set('regoffset', '1'); ++ test("regoffset", "0x00000001"); ++ ++ print("\nTesting regvalue\n"); ++ set('regoffset', '3c'); ++ test("regvalue", "0x12345678"); ++ set('regvalue', '5a5a5a5a'); ++ test("regvalue", "0x5a5a5a5a"); ++ set('regvalue','a5a5a5a5'); ++ test("regvalue", "0xa5a5a5a5"); ++ set('guid','12345678'); ++ ++ # Test HNP Capable ++ print("\nTesting HNP Capable bit\n"); ++ set('hnpcapable', '1'); ++ test("hnpcapable", "0x1"); ++ set('hnpcapable','0'); ++ test("hnpcapable", "0x0"); ++ ++ set('regoffset','0c'); ++ ++ my $old = get('gusbcfg'); ++ print("setting hnpcapable\n"); ++ set('hnpcapable', '1'); ++ test("hnpcapable", "0x1"); ++ test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<9))); ++ test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<9))); ++ ++ $old = get('gusbcfg'); ++ print("clearing hnpcapable\n"); ++ set('hnpcapable', '0'); ++ test("hnpcapable", "0x0"); ++ test ('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<9))); ++ test ('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<9))); ++ ++ # Test SRP Capable ++ print("\nTesting SRP Capable bit\n"); ++ set('srpcapable', '1'); ++ test("srpcapable", "0x1"); ++ set('srpcapable','0'); ++ test("srpcapable", "0x0"); ++ ++ set('regoffset','0c'); ++ ++ $old = get('gusbcfg'); ++ print("setting srpcapable\n"); ++ set('srpcapable', '1'); ++ test("srpcapable", "0x1"); ++ test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<8))); ++ test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<8))); ++ ++ $old = get('gusbcfg'); ++ print("clearing srpcapable\n"); ++ set('srpcapable', '0'); ++ test("srpcapable", "0x0"); ++ test('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<8))); ++ test('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<8))); ++ ++ # Test GGPIO ++ print("\nTesting GGPIO\n"); ++ set('ggpio','5a5a5a5a'); ++ test('ggpio','0x5a5a0000'); ++ set('ggpio','a5a5a5a5'); ++ test('ggpio','0xa5a50000'); ++ set('ggpio','11110000'); ++ test('ggpio','0x11110000'); ++ set('ggpio','00001111'); ++ test('ggpio','0x00000000'); ++ ++ # Test DEVSPEED ++ print("\nTesting DEVSPEED\n"); ++ set('regoffset','800'); ++ $old = get('regvalue'); ++ set('devspeed','0'); ++ test('devspeed','0x0'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3))); ++ set('devspeed','1'); ++ test('devspeed','0x1'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1)); ++ set('devspeed','2'); ++ test('devspeed','0x2'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 2)); ++ set('devspeed','3'); ++ test('devspeed','0x3'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 3)); ++ set('devspeed','4'); ++ test('devspeed','0x0'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3))); ++ set('devspeed','5'); ++ test('devspeed','0x1'); ++ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1)); ++ ++ ++ # mode Returns the current mode:0 for device mode1 for host mode Read ++ # hnp Initiate the Host Negotiation Protocol. Read returns the status. Read/Write ++ # srp Initiate the Session Request Protocol. Read returns the status. Read/Write ++ # buspower Get or Set the Power State of the bus (0 - Off or 1 - On) Read/Write ++ # bussuspend Suspend the USB bus. Read/Write ++ # busconnected Get the connection status of the bus Read ++ ++ # gotgctl Get or set the Core Control Status Register. Read/Write ++ ## gusbcfg Get or set the Core USB Configuration Register Read/Write ++ # grxfsiz Get or set the Receive FIFO Size Register Read/Write ++ # gnptxfsiz Get or set the non-periodic Transmit Size Register Read/Write ++ # gpvndctl Get or set the PHY Vendor Control Register Read/Write ++ ## ggpio Get the value in the lower 16-bits of the General Purpose IO Register or Set the upper 16 bits. Read/Write ++ ## guid Get or set the value of the User ID Register Read/Write ++ ## gsnpsid Get the value of the Synopsys ID Regester Read ++ ## devspeed Get or set the device speed setting in the DCFG register Read/Write ++ # enumspeed Gets the device enumeration Speed. Read ++ # hptxfsiz Get the value of the Host Periodic Transmit FIFO Read ++ # hprt0 Get or Set the value in the Host Port Control and Status Register Read/Write ++ ++ test_status("TEST NYI") or die; ++} ++ ++test_main(); ++0; diff --git a/target/linux/brcm2708/patches-4.9/950-0032-bcm2708-framebuffer-driver.patch b/target/linux/brcm2708/patches-4.9/950-0032-bcm2708-framebuffer-driver.patch new file mode 100644 index 000000000000..b7c05c1611bd --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0032-bcm2708-framebuffer-driver.patch @@ -0,0 +1,3452 @@ +From cca69d888eb770c496cca83d37accb62a22e84c7 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Wed, 17 Jun 2015 17:06:34 +0100 +Subject: [PATCH] bcm2708 framebuffer driver +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: popcornmix + +bcm2708_fb : Implement blanking support using the mailbox property interface + +bcm2708_fb: Add pan and vsync controls + +bcm2708_fb: DMA acceleration for fb_copyarea + +Based on http://www.raspberrypi.org/phpBB3/viewtopic.php?p=62425#p62425 +Also used Simon's dmaer_master module as a reference for tweaking DMA +settings for better performance. + +For now busylooping only. IRQ support might be added later. +With non-overclocked Raspberry Pi, the performance is ~360 MB/s +for simple copy or ~260 MB/s for two-pass copy (used when dragging +windows to the right). + +In the case of using DMA channel 0, the performance improves +to ~440 MB/s. + +For comparison, VFP optimized CPU copy can only do ~114 MB/s in +the same conditions (hindered by reading uncached source buffer). + +Signed-off-by: Siarhei Siamashka + +bcm2708_fb: report number of dma copies + +Add a counter (exported via debugfs) reporting the +number of dma copies that the framebuffer driver +has done, in order to help evaluate different +optimization strategies. + +Signed-off-by: Luke Diamand + +bcm2708_fb: use IRQ for DMA copies + +The copyarea ioctl() uses DMA to speed things along. This +was busy-waiting for completion. This change supports using +an interrupt instead for larger transfers. For small +transfers, busy-waiting is still likely to be faster. + +Signed-off-by: Luke Diamand + +bcm2708: Make ioctl logging quieter + +video: fbdev: bcm2708_fb: Don't panic on error + +No need to panic the kernel if the video driver fails. +Just print a message and return an error. + +Signed-off-by: Noralf Trønnes + +fbdev: bcm2708_fb: Add ARCH_BCM2835 support + +Add Device Tree support. +Pass the device to dma_alloc_coherent() in order to get the +correct bus address on ARCH_BCM2835. +Use the new DMA legacy API header file. +Including is not necessary. + +Signed-off-by: Noralf Trønnes + +BCM270x_DT: Add bcm2708-fb device + +Add bcm2708-fb to Device Tree and don't add the +platform device when booting in DT mode. + +Signed-off-by: Noralf Trønnes +--- + drivers/video/fbdev/Kconfig | 14 + + drivers/video/fbdev/Makefile | 1 + + drivers/video/fbdev/bcm2708_fb.c | 844 ++++++++++ + drivers/video/logo/logo_linux_clut224.ppm | 2483 ++++++++++------------------- + 4 files changed, 1740 insertions(+), 1602 deletions(-) + create mode 100644 drivers/video/fbdev/bcm2708_fb.c + +--- a/drivers/video/fbdev/Kconfig ++++ b/drivers/video/fbdev/Kconfig +@@ -228,6 +228,20 @@ config FB_TILEBLITTING + comment "Frame buffer hardware drivers" + depends on FB + ++config FB_BCM2708 ++ tristate "BCM2708 framebuffer support" ++ depends on FB && RASPBERRYPI_FIRMWARE ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This framebuffer device driver is for the BCM2708 framebuffer. ++ ++ If you want to compile this as a module (=code which can be ++ inserted into and removed from the running kernel), say M ++ here and read . The module ++ will be called bcm2708_fb. ++ + config FB_GRVGA + tristate "Aeroflex Gaisler framebuffer support" + depends on FB && SPARC +--- a/drivers/video/fbdev/Makefile ++++ b/drivers/video/fbdev/Makefile +@@ -10,6 +10,7 @@ obj-$(CONFIG_FB_MACMODES) += macmod + obj-$(CONFIG_FB_WMT_GE_ROPS) += wmt_ge_rops.o + + # Hardware specific drivers go first ++obj-$(CONFIG_FB_BCM2708) += bcm2708_fb.o + obj-$(CONFIG_FB_AMIGA) += amifb.o c2p_planar.o + obj-$(CONFIG_FB_ARC) += arcfb.o + obj-$(CONFIG_FB_CLPS711X) += clps711x-fb.o +--- /dev/null ++++ b/drivers/video/fbdev/bcm2708_fb.c +@@ -0,0 +1,844 @@ ++/* ++ * linux/drivers/video/bcm2708_fb.c ++ * ++ * Copyright (C) 2010 Broadcom ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Broadcom simple framebuffer driver ++ * ++ * This file is derived from cirrusfb.c ++ * Copyright 1999-2001 Jeff Garzik ++ * ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++//#define BCM2708_FB_DEBUG ++#define MODULE_NAME "bcm2708_fb" ++ ++#ifdef BCM2708_FB_DEBUG ++#define print_debug(fmt,...) pr_debug("%s:%s:%d: "fmt, MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__) ++#else ++#define print_debug(fmt,...) ++#endif ++ ++/* This is limited to 16 characters when displayed by X startup */ ++static const char *bcm2708_name = "BCM2708 FB"; ++ ++#define DRIVER_NAME "bcm2708_fb" ++ ++static int fbwidth = 800; /* module parameter */ ++static int fbheight = 480; /* module parameter */ ++static int fbdepth = 32; /* module parameter */ ++static int fbswap = 0; /* module parameter */ ++ ++static u32 dma_busy_wait_threshold = 1<<15; ++module_param(dma_busy_wait_threshold, int, 0644); ++MODULE_PARM_DESC(dma_busy_wait_threshold, "Busy-wait for DMA completion below this area"); ++ ++struct fb_alloc_tags { ++ struct rpi_firmware_property_tag_header tag1; ++ u32 xres, yres; ++ struct rpi_firmware_property_tag_header tag2; ++ u32 xres_virtual, yres_virtual; ++ struct rpi_firmware_property_tag_header tag3; ++ u32 bpp; ++ struct rpi_firmware_property_tag_header tag4; ++ u32 xoffset, yoffset; ++ struct rpi_firmware_property_tag_header tag5; ++ u32 base, screen_size; ++ struct rpi_firmware_property_tag_header tag6; ++ u32 pitch; ++}; ++ ++struct bcm2708_fb_stats { ++ struct debugfs_regset32 regset; ++ u32 dma_copies; ++ u32 dma_irqs; ++}; ++ ++struct bcm2708_fb { ++ struct fb_info fb; ++ struct platform_device *dev; ++ struct rpi_firmware *fw; ++ u32 cmap[16]; ++ u32 gpu_cmap[256]; ++ int dma_chan; ++ int dma_irq; ++ void __iomem *dma_chan_base; ++ void *cb_base; /* DMA control blocks */ ++ dma_addr_t cb_handle; ++ struct dentry *debugfs_dir; ++ wait_queue_head_t dma_waitq; ++ struct bcm2708_fb_stats stats; ++ unsigned long fb_bus_address; ++}; ++ ++#define to_bcm2708(info) container_of(info, struct bcm2708_fb, fb) ++ ++static void bcm2708_fb_debugfs_deinit(struct bcm2708_fb *fb) ++{ ++ debugfs_remove_recursive(fb->debugfs_dir); ++ fb->debugfs_dir = NULL; ++} ++ ++static int bcm2708_fb_debugfs_init(struct bcm2708_fb *fb) ++{ ++ static struct debugfs_reg32 stats_registers[] = { ++ { ++ "dma_copies", ++ offsetof(struct bcm2708_fb_stats, dma_copies) ++ }, ++ { ++ "dma_irqs", ++ offsetof(struct bcm2708_fb_stats, dma_irqs) ++ }, ++ }; ++ ++ fb->debugfs_dir = debugfs_create_dir(DRIVER_NAME, NULL); ++ if (!fb->debugfs_dir) { ++ pr_warn("%s: could not create debugfs entry\n", ++ __func__); ++ return -EFAULT; ++ } ++ ++ fb->stats.regset.regs = stats_registers; ++ fb->stats.regset.nregs = ARRAY_SIZE(stats_registers); ++ fb->stats.regset.base = &fb->stats; ++ ++ if (!debugfs_create_regset32( ++ "stats", 0444, fb->debugfs_dir, &fb->stats.regset)) { ++ pr_warn("%s: could not create statistics registers\n", ++ __func__); ++ goto fail; ++ } ++ return 0; ++ ++fail: ++ bcm2708_fb_debugfs_deinit(fb); ++ return -EFAULT; ++} ++ ++static int bcm2708_fb_set_bitfields(struct fb_var_screeninfo *var) ++{ ++ int ret = 0; ++ ++ memset(&var->transp, 0, sizeof(var->transp)); ++ ++ var->red.msb_right = 0; ++ var->green.msb_right = 0; ++ var->blue.msb_right = 0; ++ ++ switch (var->bits_per_pixel) { ++ case 1: ++ case 2: ++ case 4: ++ case 8: ++ var->red.length = var->bits_per_pixel; ++ var->red.offset = 0; ++ var->green.length = var->bits_per_pixel; ++ var->green.offset = 0; ++ var->blue.length = var->bits_per_pixel; ++ var->blue.offset = 0; ++ break; ++ case 16: ++ var->red.length = 5; ++ var->blue.length = 5; ++ /* ++ * Green length can be 5 or 6 depending whether ++ * we're operating in RGB555 or RGB565 mode. ++ */ ++ if (var->green.length != 5 && var->green.length != 6) ++ var->green.length = 6; ++ break; ++ case 24: ++ var->red.length = 8; ++ var->blue.length = 8; ++ var->green.length = 8; ++ break; ++ case 32: ++ var->red.length = 8; ++ var->green.length = 8; ++ var->blue.length = 8; ++ var->transp.length = 8; ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ ++ /* ++ * >= 16bpp displays have separate colour component bitfields ++ * encoded in the pixel data. Calculate their position from ++ * the bitfield length defined above. ++ */ ++ if (ret == 0 && var->bits_per_pixel >= 24 && fbswap) { ++ var->blue.offset = 0; ++ var->green.offset = var->blue.offset + var->blue.length; ++ var->red.offset = var->green.offset + var->green.length; ++ var->transp.offset = var->red.offset + var->red.length; ++ } else if (ret == 0 && var->bits_per_pixel >= 24) { ++ var->red.offset = 0; ++ var->green.offset = var->red.offset + var->red.length; ++ var->blue.offset = var->green.offset + var->green.length; ++ var->transp.offset = var->blue.offset + var->blue.length; ++ } else if (ret == 0 && var->bits_per_pixel >= 16) { ++ var->blue.offset = 0; ++ var->green.offset = var->blue.offset + var->blue.length; ++ var->red.offset = var->green.offset + var->green.length; ++ var->transp.offset = var->red.offset + var->red.length; ++ } ++ ++ return ret; ++} ++ ++static int bcm2708_fb_check_var(struct fb_var_screeninfo *var, ++ struct fb_info *info) ++{ ++ /* info input, var output */ ++ print_debug("bcm2708_fb_check_var info(%p) %dx%d (%dx%d), %d, %d\n", info, ++ info->var.xres, info->var.yres, info->var.xres_virtual, ++ info->var.yres_virtual, (int)info->screen_size, ++ info->var.bits_per_pixel); ++ print_debug("bcm2708_fb_check_var var(%p) %dx%d (%dx%d), %d\n", var, ++ var->xres, var->yres, var->xres_virtual, var->yres_virtual, ++ var->bits_per_pixel); ++ ++ if (!var->bits_per_pixel) ++ var->bits_per_pixel = 16; ++ ++ if (bcm2708_fb_set_bitfields(var) != 0) { ++ pr_err("bcm2708_fb_check_var: invalid bits_per_pixel %d\n", ++ var->bits_per_pixel); ++ return -EINVAL; ++ } ++ ++ ++ if (var->xres_virtual < var->xres) ++ var->xres_virtual = var->xres; ++ /* use highest possible virtual resolution */ ++ if (var->yres_virtual == -1) { ++ var->yres_virtual = 480; ++ ++ pr_err ++ ("bcm2708_fb_check_var: virtual resolution set to maximum of %dx%d\n", ++ var->xres_virtual, var->yres_virtual); ++ } ++ if (var->yres_virtual < var->yres) ++ var->yres_virtual = var->yres; ++ ++ if (var->xoffset < 0) ++ var->xoffset = 0; ++ if (var->yoffset < 0) ++ var->yoffset = 0; ++ ++ /* truncate xoffset and yoffset to maximum if too high */ ++ if (var->xoffset > var->xres_virtual - var->xres) ++ var->xoffset = var->xres_virtual - var->xres - 1; ++ if (var->yoffset > var->yres_virtual - var->yres) ++ var->yoffset = var->yres_virtual - var->yres - 1; ++ ++ return 0; ++} ++ ++static int bcm2708_fb_set_par(struct fb_info *info) ++{ ++ struct bcm2708_fb *fb = to_bcm2708(info); ++ struct fb_alloc_tags fbinfo = { ++ .tag1 = { RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT, ++ 8, 0, }, ++ .xres = info->var.xres, ++ .yres = info->var.yres, ++ .tag2 = { RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT, ++ 8, 0, }, ++ .xres_virtual = info->var.xres_virtual, ++ .yres_virtual = info->var.yres_virtual, ++ .tag3 = { RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH, 4, 0 }, ++ .bpp = info->var.bits_per_pixel, ++ .tag4 = { RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET, 8, 0 }, ++ .xoffset = info->var.xoffset, ++ .yoffset = info->var.yoffset, ++ .tag5 = { RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE, 8, 0 }, ++ .base = 0, ++ .screen_size = 0, ++ .tag6 = { RPI_FIRMWARE_FRAMEBUFFER_GET_PITCH, 4, 0 }, ++ .pitch = 0, ++ }; ++ int ret; ++ ++ print_debug("bcm2708_fb_set_par info(%p) %dx%d (%dx%d), %d, %d\n", info, ++ info->var.xres, info->var.yres, info->var.xres_virtual, ++ info->var.yres_virtual, (int)info->screen_size, ++ info->var.bits_per_pixel); ++ ++ ret = rpi_firmware_property_list(fb->fw, &fbinfo, sizeof(fbinfo)); ++ if (ret) { ++ dev_err(info->device, ++ "Failed to allocate GPU framebuffer (%d)\n", ret); ++ return ret; ++ } ++ ++ if (info->var.bits_per_pixel <= 8) ++ fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; ++ else ++ fb->fb.fix.visual = FB_VISUAL_TRUECOLOR; ++ ++ fb->fb.fix.line_length = fbinfo.pitch; ++ fbinfo.base |= 0x40000000; ++ fb->fb_bus_address = fbinfo.base; ++ fbinfo.base &= ~0xc0000000; ++ fb->fb.fix.smem_start = fbinfo.base; ++ fb->fb.fix.smem_len = fbinfo.pitch * fbinfo.yres_virtual; ++ fb->fb.screen_size = fbinfo.screen_size; ++ if (fb->fb.screen_base) ++ iounmap(fb->fb.screen_base); ++ fb->fb.screen_base = ioremap_wc(fbinfo.base, fb->fb.screen_size); ++ if (!fb->fb.screen_base) { ++ /* the console may currently be locked */ ++ console_trylock(); ++ console_unlock(); ++ dev_err(info->device, "Failed to set screen_base\n"); ++ return -ENOMEM; ++ } ++ ++ print_debug ++ ("BCM2708FB: start = %p,%p width=%d, height=%d, bpp=%d, pitch=%d size=%d\n", ++ (void *)fb->fb.screen_base, (void *)fb->fb_bus_address, ++ fbinfo.xres, fbinfo.yres, fbinfo.bpp, ++ fbinfo.pitch, (int)fb->fb.screen_size); ++ ++ return 0; ++} ++ ++static inline u32 convert_bitfield(int val, struct fb_bitfield *bf) ++{ ++ unsigned int mask = (1 << bf->length) - 1; ++ ++ return (val >> (16 - bf->length) & mask) << bf->offset; ++} ++ ++ ++static int bcm2708_fb_setcolreg(unsigned int regno, unsigned int red, ++ unsigned int green, unsigned int blue, ++ unsigned int transp, struct fb_info *info) ++{ ++ struct bcm2708_fb *fb = to_bcm2708(info); ++ ++ /*print_debug("BCM2708FB: setcolreg %d:(%02x,%02x,%02x,%02x) %x\n", regno, red, green, blue, transp, fb->fb.fix.visual);*/ ++ if (fb->fb.var.bits_per_pixel <= 8) { ++ if (regno < 256) { ++ /* blue [23:16], green [15:8], red [7:0] */ ++ fb->gpu_cmap[regno] = ((red >> 8) & 0xff) << 0 | ++ ((green >> 8) & 0xff) << 8 | ++ ((blue >> 8) & 0xff) << 16; ++ } ++ /* Hack: we need to tell GPU the palette has changed, but currently bcm2708_fb_set_par takes noticable time when called for every (256) colour */ ++ /* So just call it for what looks like the last colour in a list for now. */ ++ if (regno == 15 || regno == 255) { ++ struct packet { ++ u32 offset; ++ u32 length; ++ u32 cmap[256]; ++ } *packet; ++ int ret; ++ ++ packet = kmalloc(sizeof(*packet), GFP_KERNEL); ++ if (!packet) ++ return -ENOMEM; ++ packet->offset = 0; ++ packet->length = regno + 1; ++ memcpy(packet->cmap, fb->gpu_cmap, sizeof(packet->cmap)); ++ ret = rpi_firmware_property(fb->fw, RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE, ++ packet, (2 + packet->length) * sizeof(u32)); ++ if (ret || packet->offset) ++ dev_err(info->device, "Failed to set palette (%d,%u)\n", ++ ret, packet->offset); ++ kfree(packet); ++ } ++ } else if (regno < 16) { ++ fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) | ++ convert_bitfield(blue, &fb->fb.var.blue) | ++ convert_bitfield(green, &fb->fb.var.green) | ++ convert_bitfield(red, &fb->fb.var.red); ++ } ++ return regno > 255; ++} ++ ++static int bcm2708_fb_blank(int blank_mode, struct fb_info *info) ++{ ++ struct bcm2708_fb *fb = to_bcm2708(info); ++ u32 value; ++ int ret; ++ ++ switch (blank_mode) { ++ case FB_BLANK_UNBLANK: ++ value = 0; ++ break; ++ case FB_BLANK_NORMAL: ++ case FB_BLANK_VSYNC_SUSPEND: ++ case FB_BLANK_HSYNC_SUSPEND: ++ case FB_BLANK_POWERDOWN: ++ value = 1; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ ret = rpi_firmware_property(fb->fw, RPI_FIRMWARE_FRAMEBUFFER_BLANK, ++ &value, sizeof(value)); ++ if (ret) ++ dev_err(info->device, "bcm2708_fb_blank(%d) failed: %d\n", ++ blank_mode, ret); ++ ++ return ret; ++} ++ ++static int bcm2708_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) ++{ ++ s32 result; ++ info->var.xoffset = var->xoffset; ++ info->var.yoffset = var->yoffset; ++ result = bcm2708_fb_set_par(info); ++ if (result != 0) ++ pr_err("bcm2708_fb_pan_display(%d,%d) returns=%d\n", var->xoffset, var->yoffset, result); ++ return result; ++} ++ ++static int bcm2708_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg) ++{ ++ struct bcm2708_fb *fb = to_bcm2708(info); ++ u32 dummy = 0; ++ int ret; ++ ++ switch (cmd) { ++ case FBIO_WAITFORVSYNC: ++ ret = rpi_firmware_property(fb->fw, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC, ++ &dummy, sizeof(dummy)); ++ break; ++ default: ++ dev_dbg(info->device, "Unknown ioctl 0x%x\n", cmd); ++ return -ENOTTY; ++ } ++ ++ if (ret) ++ dev_err(info->device, "ioctl 0x%x failed (%d)\n", cmd, ret); ++ ++ return ret; ++} ++static void bcm2708_fb_fillrect(struct fb_info *info, ++ const struct fb_fillrect *rect) ++{ ++ /* (is called) print_debug("bcm2708_fb_fillrect\n"); */ ++ cfb_fillrect(info, rect); ++} ++ ++/* A helper function for configuring dma control block */ ++static void set_dma_cb(struct bcm2708_dma_cb *cb, ++ int burst_size, ++ dma_addr_t dst, ++ int dst_stride, ++ dma_addr_t src, ++ int src_stride, ++ int w, ++ int h) ++{ ++ cb->info = BCM2708_DMA_BURST(burst_size) | BCM2708_DMA_S_WIDTH | ++ BCM2708_DMA_S_INC | BCM2708_DMA_D_WIDTH | ++ BCM2708_DMA_D_INC | BCM2708_DMA_TDMODE; ++ cb->dst = dst; ++ cb->src = src; ++ /* ++ * This is not really obvious from the DMA documentation, ++ * but the top 16 bits must be programmmed to "height -1" ++ * and not "height" in 2D mode. ++ */ ++ cb->length = ((h - 1) << 16) | w; ++ cb->stride = ((dst_stride - w) << 16) | (u16)(src_stride - w); ++ cb->pad[0] = 0; ++ cb->pad[1] = 0; ++} ++ ++static void bcm2708_fb_copyarea(struct fb_info *info, ++ const struct fb_copyarea *region) ++{ ++ struct bcm2708_fb *fb = to_bcm2708(info); ++ struct bcm2708_dma_cb *cb = fb->cb_base; ++ int bytes_per_pixel = (info->var.bits_per_pixel + 7) >> 3; ++ /* Channel 0 supports larger bursts and is a bit faster */ ++ int burst_size = (fb->dma_chan == 0) ? 8 : 2; ++ int pixels = region->width * region->height; ++ ++ /* Fallback to cfb_copyarea() if we don't like something */ ++ if (in_atomic() || ++ bytes_per_pixel > 4 || ++ info->var.xres * info->var.yres > 1920 * 1200 || ++ region->width <= 0 || region->width > info->var.xres || ++ region->height <= 0 || region->height > info->var.yres || ++ region->sx < 0 || region->sx >= info->var.xres || ++ region->sy < 0 || region->sy >= info->var.yres || ++ region->dx < 0 || region->dx >= info->var.xres || ++ region->dy < 0 || region->dy >= info->var.yres || ++ region->sx + region->width > info->var.xres || ++ region->dx + region->width > info->var.xres || ++ region->sy + region->height > info->var.yres || ++ region->dy + region->height > info->var.yres) { ++ cfb_copyarea(info, region); ++ return; ++ } ++ ++ if (region->dy == region->sy && region->dx > region->sx) { ++ /* ++ * A difficult case of overlapped copy. Because DMA can't ++ * copy individual scanlines in backwards direction, we need ++ * two-pass processing. We do it by programming a chain of dma ++ * control blocks in the first 16K part of the buffer and use ++ * the remaining 48K as the intermediate temporary scratch ++ * buffer. The buffer size is sufficient to handle up to ++ * 1920x1200 resolution at 32bpp pixel depth. ++ */ ++ int y; ++ dma_addr_t control_block_pa = fb->cb_handle; ++ dma_addr_t scratchbuf = fb->cb_handle + 16 * 1024; ++ int scanline_size = bytes_per_pixel * region->width; ++ int scanlines_per_cb = (64 * 1024 - 16 * 1024) / scanline_size; ++ ++ for (y = 0; y < region->height; y += scanlines_per_cb) { ++ dma_addr_t src = ++ fb->fb_bus_address + ++ bytes_per_pixel * region->sx + ++ (region->sy + y) * fb->fb.fix.line_length; ++ dma_addr_t dst = ++ fb->fb_bus_address + ++ bytes_per_pixel * region->dx + ++ (region->dy + y) * fb->fb.fix.line_length; ++ ++ if (region->height - y < scanlines_per_cb) ++ scanlines_per_cb = region->height - y; ++ ++ set_dma_cb(cb, burst_size, scratchbuf, scanline_size, ++ src, fb->fb.fix.line_length, ++ scanline_size, scanlines_per_cb); ++ control_block_pa += sizeof(struct bcm2708_dma_cb); ++ cb->next = control_block_pa; ++ cb++; ++ ++ set_dma_cb(cb, burst_size, dst, fb->fb.fix.line_length, ++ scratchbuf, scanline_size, ++ scanline_size, scanlines_per_cb); ++ control_block_pa += sizeof(struct bcm2708_dma_cb); ++ cb->next = control_block_pa; ++ cb++; ++ } ++ /* move the pointer back to the last dma control block */ ++ cb--; ++ } else { ++ /* A single dma control block is enough. */ ++ int sy, dy, stride; ++ if (region->dy <= region->sy) { ++ /* processing from top to bottom */ ++ dy = region->dy; ++ sy = region->sy; ++ stride = fb->fb.fix.line_length; ++ } else { ++ /* processing from bottom to top */ ++ dy = region->dy + region->height - 1; ++ sy = region->sy + region->height - 1; ++ stride = -fb->fb.fix.line_length; ++ } ++ set_dma_cb(cb, burst_size, ++ fb->fb_bus_address + dy * fb->fb.fix.line_length + ++ bytes_per_pixel * region->dx, ++ stride, ++ fb->fb_bus_address + sy * fb->fb.fix.line_length + ++ bytes_per_pixel * region->sx, ++ stride, ++ region->width * bytes_per_pixel, ++ region->height); ++ } ++ ++ /* end of dma control blocks chain */ ++ cb->next = 0; ++ ++ ++ if (pixels < dma_busy_wait_threshold) { ++ bcm_dma_start(fb->dma_chan_base, fb->cb_handle); ++ bcm_dma_wait_idle(fb->dma_chan_base); ++ } else { ++ void __iomem *dma_chan = fb->dma_chan_base; ++ cb->info |= BCM2708_DMA_INT_EN; ++ bcm_dma_start(fb->dma_chan_base, fb->cb_handle); ++ while (bcm_dma_is_busy(dma_chan)) { ++ wait_event_interruptible( ++ fb->dma_waitq, ++ !bcm_dma_is_busy(dma_chan)); ++ } ++ fb->stats.dma_irqs++; ++ } ++ fb->stats.dma_copies++; ++} ++ ++static void bcm2708_fb_imageblit(struct fb_info *info, ++ const struct fb_image *image) ++{ ++ /* (is called) print_debug("bcm2708_fb_imageblit\n"); */ ++ cfb_imageblit(info, image); ++} ++ ++static irqreturn_t bcm2708_fb_dma_irq(int irq, void *cxt) ++{ ++ struct bcm2708_fb *fb = cxt; ++ ++ /* FIXME: should read status register to check if this is ++ * actually interrupting us or not, in case this interrupt ++ * ever becomes shared amongst several DMA channels ++ * ++ * readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_IRQ; ++ */ ++ ++ /* acknowledge the interrupt */ ++ writel(BCM2708_DMA_INT, fb->dma_chan_base + BCM2708_DMA_CS); ++ ++ wake_up(&fb->dma_waitq); ++ return IRQ_HANDLED; ++} ++ ++static struct fb_ops bcm2708_fb_ops = { ++ .owner = THIS_MODULE, ++ .fb_check_var = bcm2708_fb_check_var, ++ .fb_set_par = bcm2708_fb_set_par, ++ .fb_setcolreg = bcm2708_fb_setcolreg, ++ .fb_blank = bcm2708_fb_blank, ++ .fb_fillrect = bcm2708_fb_fillrect, ++ .fb_copyarea = bcm2708_fb_copyarea, ++ .fb_imageblit = bcm2708_fb_imageblit, ++ .fb_pan_display = bcm2708_fb_pan_display, ++ .fb_ioctl = bcm2708_ioctl, ++}; ++ ++static int bcm2708_fb_register(struct bcm2708_fb *fb) ++{ ++ int ret; ++ ++ fb->fb.fbops = &bcm2708_fb_ops; ++ fb->fb.flags = FBINFO_FLAG_DEFAULT | FBINFO_HWACCEL_COPYAREA; ++ fb->fb.pseudo_palette = fb->cmap; ++ ++ strncpy(fb->fb.fix.id, bcm2708_name, sizeof(fb->fb.fix.id)); ++ fb->fb.fix.type = FB_TYPE_PACKED_PIXELS; ++ fb->fb.fix.type_aux = 0; ++ fb->fb.fix.xpanstep = 1; ++ fb->fb.fix.ypanstep = 1; ++ fb->fb.fix.ywrapstep = 0; ++ fb->fb.fix.accel = FB_ACCEL_NONE; ++ ++ fb->fb.var.xres = fbwidth; ++ fb->fb.var.yres = fbheight; ++ fb->fb.var.xres_virtual = fbwidth; ++ fb->fb.var.yres_virtual = fbheight; ++ fb->fb.var.bits_per_pixel = fbdepth; ++ fb->fb.var.vmode = FB_VMODE_NONINTERLACED; ++ fb->fb.var.activate = FB_ACTIVATE_NOW; ++ fb->fb.var.nonstd = 0; ++ fb->fb.var.height = -1; /* height of picture in mm */ ++ fb->fb.var.width = -1; /* width of picture in mm */ ++ fb->fb.var.accel_flags = 0; ++ ++ fb->fb.monspecs.hfmin = 0; ++ fb->fb.monspecs.hfmax = 100000; ++ fb->fb.monspecs.vfmin = 0; ++ fb->fb.monspecs.vfmax = 400; ++ fb->fb.monspecs.dclkmin = 1000000; ++ fb->fb.monspecs.dclkmax = 100000000; ++ ++ bcm2708_fb_set_bitfields(&fb->fb.var); ++ init_waitqueue_head(&fb->dma_waitq); ++ ++ /* ++ * Allocate colourmap. ++ */ ++ ++ fb_set_var(&fb->fb, &fb->fb.var); ++ ret = bcm2708_fb_set_par(&fb->fb); ++ if (ret) ++ return ret; ++ ++ print_debug("BCM2708FB: registering framebuffer (%dx%d@%d) (%d)\n", fbwidth, ++ fbheight, fbdepth, fbswap); ++ ++ ret = register_framebuffer(&fb->fb); ++ print_debug("BCM2708FB: register framebuffer (%d)\n", ret); ++ if (ret == 0) ++ goto out; ++ ++ print_debug("BCM2708FB: cannot register framebuffer (%d)\n", ret); ++out: ++ return ret; ++} ++ ++static int bcm2708_fb_probe(struct platform_device *dev) ++{ ++ struct device_node *fw_np; ++ struct rpi_firmware *fw; ++ struct bcm2708_fb *fb; ++ int ret; ++ ++ fw_np = of_parse_phandle(dev->dev.of_node, "firmware", 0); ++/* Remove comment when booting without Device Tree is no longer supported ++ if (!fw_np) { ++ dev_err(&dev->dev, "Missing firmware node\n"); ++ return -ENOENT; ++ } ++*/ ++ fw = rpi_firmware_get(fw_np); ++ if (!fw) ++ return -EPROBE_DEFER; ++ ++ fb = kzalloc(sizeof(struct bcm2708_fb), GFP_KERNEL); ++ if (!fb) { ++ dev_err(&dev->dev, ++ "could not allocate new bcm2708_fb struct\n"); ++ ret = -ENOMEM; ++ goto free_region; ++ } ++ ++ fb->fw = fw; ++ bcm2708_fb_debugfs_init(fb); ++ ++ fb->cb_base = dma_alloc_writecombine(&dev->dev, SZ_64K, ++ &fb->cb_handle, GFP_KERNEL); ++ if (!fb->cb_base) { ++ dev_err(&dev->dev, "cannot allocate DMA CBs\n"); ++ ret = -ENOMEM; ++ goto free_fb; ++ } ++ ++ pr_info("BCM2708FB: allocated DMA memory %08x\n", ++ fb->cb_handle); ++ ++ ret = bcm_dma_chan_alloc(BCM_DMA_FEATURE_BULK, ++ &fb->dma_chan_base, &fb->dma_irq); ++ if (ret < 0) { ++ dev_err(&dev->dev, "couldn't allocate a DMA channel\n"); ++ goto free_cb; ++ } ++ fb->dma_chan = ret; ++ ++ ret = request_irq(fb->dma_irq, bcm2708_fb_dma_irq, ++ 0, "bcm2708_fb dma", fb); ++ if (ret) { ++ pr_err("%s: failed to request DMA irq\n", __func__); ++ goto free_dma_chan; ++ } ++ ++ ++ pr_info("BCM2708FB: allocated DMA channel %d @ %p\n", ++ fb->dma_chan, fb->dma_chan_base); ++ ++ fb->dev = dev; ++ fb->fb.device = &dev->dev; ++ ++ ret = bcm2708_fb_register(fb); ++ if (ret == 0) { ++ platform_set_drvdata(dev, fb); ++ goto out; ++ } ++ ++free_dma_chan: ++ bcm_dma_chan_free(fb->dma_chan); ++free_cb: ++ dma_free_writecombine(&dev->dev, SZ_64K, fb->cb_base, fb->cb_handle); ++free_fb: ++ kfree(fb); ++free_region: ++ dev_err(&dev->dev, "probe failed, err %d\n", ret); ++out: ++ return ret; ++} ++ ++static int bcm2708_fb_remove(struct platform_device *dev) ++{ ++ struct bcm2708_fb *fb = platform_get_drvdata(dev); ++ ++ platform_set_drvdata(dev, NULL); ++ ++ if (fb->fb.screen_base) ++ iounmap(fb->fb.screen_base); ++ unregister_framebuffer(&fb->fb); ++ ++ dma_free_writecombine(&dev->dev, SZ_64K, fb->cb_base, fb->cb_handle); ++ bcm_dma_chan_free(fb->dma_chan); ++ ++ bcm2708_fb_debugfs_deinit(fb); ++ ++ free_irq(fb->dma_irq, fb); ++ ++ kfree(fb); ++ ++ return 0; ++} ++ ++static const struct of_device_id bcm2708_fb_of_match_table[] = { ++ { .compatible = "brcm,bcm2708-fb", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, bcm2708_fb_of_match_table); ++ ++static struct platform_driver bcm2708_fb_driver = { ++ .probe = bcm2708_fb_probe, ++ .remove = bcm2708_fb_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2708_fb_of_match_table, ++ }, ++}; ++ ++static int __init bcm2708_fb_init(void) ++{ ++ return platform_driver_register(&bcm2708_fb_driver); ++} ++ ++module_init(bcm2708_fb_init); ++ ++static void __exit bcm2708_fb_exit(void) ++{ ++ platform_driver_unregister(&bcm2708_fb_driver); ++} ++ ++module_exit(bcm2708_fb_exit); ++ ++module_param(fbwidth, int, 0644); ++module_param(fbheight, int, 0644); ++module_param(fbdepth, int, 0644); ++module_param(fbswap, int, 0644); ++ ++MODULE_DESCRIPTION("BCM2708 framebuffer driver"); ++MODULE_LICENSE("GPL"); ++ ++MODULE_PARM_DESC(fbwidth, "Width of ARM Framebuffer"); ++MODULE_PARM_DESC(fbheight, "Height of ARM Framebuffer"); ++MODULE_PARM_DESC(fbdepth, "Bit depth of ARM Framebuffer"); ++MODULE_PARM_DESC(fbswap, "Swap order of red and blue in 24 and 32 bit modes"); +--- a/drivers/video/logo/logo_linux_clut224.ppm ++++ b/drivers/video/logo/logo_linux_clut224.ppm +@@ -1,1604 +1,883 @@ + P3 +-# Standard 224-color Linux logo +-80 80 ++63 80 + 255 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 6 6 6 10 10 10 10 10 10 +- 10 10 10 6 6 6 6 6 6 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 10 10 10 14 14 14 +- 22 22 22 26 26 26 30 30 30 34 34 34 +- 30 30 30 30 30 30 26 26 26 18 18 18 +- 14 14 14 10 10 10 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 14 14 14 26 26 26 42 42 42 +- 54 54 54 66 66 66 78 78 78 78 78 78 +- 78 78 78 74 74 74 66 66 66 54 54 54 +- 42 42 42 26 26 26 18 18 18 10 10 10 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 22 22 22 42 42 42 66 66 66 86 86 86 +- 66 66 66 38 38 38 38 38 38 22 22 22 +- 26 26 26 34 34 34 54 54 54 66 66 66 +- 86 86 86 70 70 70 46 46 46 26 26 26 +- 14 14 14 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 10 10 10 26 26 26 +- 50 50 50 82 82 82 58 58 58 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 6 6 6 54 54 54 86 86 86 66 66 66 +- 38 38 38 18 18 18 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 22 22 22 50 50 50 +- 78 78 78 34 34 34 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 6 6 6 70 70 70 +- 78 78 78 46 46 46 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 18 18 18 42 42 42 82 82 82 +- 26 26 26 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 14 14 14 +- 46 46 46 34 34 34 6 6 6 2 2 6 +- 42 42 42 78 78 78 42 42 42 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 0 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 10 10 10 30 30 30 66 66 66 58 58 58 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 26 26 26 +- 86 86 86 101 101 101 46 46 46 10 10 10 +- 2 2 6 58 58 58 70 70 70 34 34 34 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 14 14 14 42 42 42 86 86 86 10 10 10 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 30 30 30 +- 94 94 94 94 94 94 58 58 58 26 26 26 +- 2 2 6 6 6 6 78 78 78 54 54 54 +- 22 22 22 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 22 22 22 62 62 62 62 62 62 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 26 26 26 +- 54 54 54 38 38 38 18 18 18 10 10 10 +- 2 2 6 2 2 6 34 34 34 82 82 82 +- 38 38 38 14 14 14 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 30 30 30 78 78 78 30 30 30 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 10 10 10 +- 10 10 10 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 78 78 78 +- 50 50 50 18 18 18 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 38 38 38 86 86 86 14 14 14 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 54 54 54 +- 66 66 66 26 26 26 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 42 42 42 82 82 82 2 2 6 2 2 6 +- 2 2 6 6 6 6 10 10 10 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 6 6 6 +- 14 14 14 10 10 10 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 18 18 18 +- 82 82 82 34 34 34 10 10 10 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 46 46 46 86 86 86 2 2 6 2 2 6 +- 6 6 6 6 6 6 22 22 22 34 34 34 +- 6 6 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 18 18 18 34 34 34 +- 10 10 10 50 50 50 22 22 22 2 2 6 +- 2 2 6 2 2 6 2 2 6 10 10 10 +- 86 86 86 42 42 42 14 14 14 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 46 46 46 86 86 86 2 2 6 2 2 6 +- 38 38 38 116 116 116 94 94 94 22 22 22 +- 22 22 22 2 2 6 2 2 6 2 2 6 +- 14 14 14 86 86 86 138 138 138 162 162 162 +-154 154 154 38 38 38 26 26 26 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 86 86 86 46 46 46 14 14 14 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 46 46 46 86 86 86 2 2 6 14 14 14 +-134 134 134 198 198 198 195 195 195 116 116 116 +- 10 10 10 2 2 6 2 2 6 6 6 6 +-101 98 89 187 187 187 210 210 210 218 218 218 +-214 214 214 134 134 134 14 14 14 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 86 86 86 50 50 50 18 18 18 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 1 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 46 46 46 86 86 86 2 2 6 54 54 54 +-218 218 218 195 195 195 226 226 226 246 246 246 +- 58 58 58 2 2 6 2 2 6 30 30 30 +-210 210 210 253 253 253 174 174 174 123 123 123 +-221 221 221 234 234 234 74 74 74 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 70 70 70 58 58 58 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 46 46 46 82 82 82 2 2 6 106 106 106 +-170 170 170 26 26 26 86 86 86 226 226 226 +-123 123 123 10 10 10 14 14 14 46 46 46 +-231 231 231 190 190 190 6 6 6 70 70 70 +- 90 90 90 238 238 238 158 158 158 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 70 70 70 58 58 58 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 1 0 0 0 +- 0 0 1 0 0 1 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 42 42 42 86 86 86 6 6 6 116 116 116 +-106 106 106 6 6 6 70 70 70 149 149 149 +-128 128 128 18 18 18 38 38 38 54 54 54 +-221 221 221 106 106 106 2 2 6 14 14 14 +- 46 46 46 190 190 190 198 198 198 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 74 74 74 62 62 62 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 1 0 0 0 +- 0 0 1 0 0 0 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 42 42 42 94 94 94 14 14 14 101 101 101 +-128 128 128 2 2 6 18 18 18 116 116 116 +-118 98 46 121 92 8 121 92 8 98 78 10 +-162 162 162 106 106 106 2 2 6 2 2 6 +- 2 2 6 195 195 195 195 195 195 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 74 74 74 62 62 62 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 1 0 0 1 +- 0 0 1 0 0 0 0 0 1 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 38 38 38 90 90 90 14 14 14 58 58 58 +-210 210 210 26 26 26 54 38 6 154 114 10 +-226 170 11 236 186 11 225 175 15 184 144 12 +-215 174 15 175 146 61 37 26 9 2 2 6 +- 70 70 70 246 246 246 138 138 138 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 70 70 70 66 66 66 26 26 26 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 38 38 38 86 86 86 14 14 14 10 10 10 +-195 195 195 188 164 115 192 133 9 225 175 15 +-239 182 13 234 190 10 232 195 16 232 200 30 +-245 207 45 241 208 19 232 195 16 184 144 12 +-218 194 134 211 206 186 42 42 42 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 50 50 50 74 74 74 30 30 30 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 34 34 34 86 86 86 14 14 14 2 2 6 +-121 87 25 192 133 9 219 162 10 239 182 13 +-236 186 11 232 195 16 241 208 19 244 214 54 +-246 218 60 246 218 38 246 215 20 241 208 19 +-241 208 19 226 184 13 121 87 25 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 50 50 50 82 82 82 34 34 34 10 10 10 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 34 34 34 82 82 82 30 30 30 61 42 6 +-180 123 7 206 145 10 230 174 11 239 182 13 +-234 190 10 238 202 15 241 208 19 246 218 74 +-246 218 38 246 215 20 246 215 20 246 215 20 +-226 184 13 215 174 15 184 144 12 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 26 26 26 94 94 94 42 42 42 14 14 14 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 78 78 78 50 50 50 104 69 6 +-192 133 9 216 158 10 236 178 12 236 186 11 +-232 195 16 241 208 19 244 214 54 245 215 43 +-246 215 20 246 215 20 241 208 19 198 155 10 +-200 144 11 216 158 10 156 118 10 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 6 6 6 90 90 90 54 54 54 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 78 78 78 46 46 46 22 22 22 +-137 92 6 210 162 10 239 182 13 238 190 10 +-238 202 15 241 208 19 246 215 20 246 215 20 +-241 208 19 203 166 17 185 133 11 210 150 10 +-216 158 10 210 150 10 102 78 10 2 2 6 +- 6 6 6 54 54 54 14 14 14 2 2 6 +- 2 2 6 62 62 62 74 74 74 30 30 30 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 34 34 34 78 78 78 50 50 50 6 6 6 +- 94 70 30 139 102 15 190 146 13 226 184 13 +-232 200 30 232 195 16 215 174 15 190 146 13 +-168 122 10 192 133 9 210 150 10 213 154 11 +-202 150 34 182 157 106 101 98 89 2 2 6 +- 2 2 6 78 78 78 116 116 116 58 58 58 +- 2 2 6 22 22 22 90 90 90 46 46 46 +- 18 18 18 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 38 38 38 86 86 86 50 50 50 6 6 6 +-128 128 128 174 154 114 156 107 11 168 122 10 +-198 155 10 184 144 12 197 138 11 200 144 11 +-206 145 10 206 145 10 197 138 11 188 164 115 +-195 195 195 198 198 198 174 174 174 14 14 14 +- 2 2 6 22 22 22 116 116 116 116 116 116 +- 22 22 22 2 2 6 74 74 74 70 70 70 +- 30 30 30 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 50 50 50 101 101 101 26 26 26 10 10 10 +-138 138 138 190 190 190 174 154 114 156 107 11 +-197 138 11 200 144 11 197 138 11 192 133 9 +-180 123 7 190 142 34 190 178 144 187 187 187 +-202 202 202 221 221 221 214 214 214 66 66 66 +- 2 2 6 2 2 6 50 50 50 62 62 62 +- 6 6 6 2 2 6 10 10 10 90 90 90 +- 50 50 50 18 18 18 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 10 10 10 34 34 34 +- 74 74 74 74 74 74 2 2 6 6 6 6 +-144 144 144 198 198 198 190 190 190 178 166 146 +-154 121 60 156 107 11 156 107 11 168 124 44 +-174 154 114 187 187 187 190 190 190 210 210 210 +-246 246 246 253 253 253 253 253 253 182 182 182 +- 6 6 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 62 62 62 +- 74 74 74 34 34 34 14 14 14 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 10 10 10 22 22 22 54 54 54 +- 94 94 94 18 18 18 2 2 6 46 46 46 +-234 234 234 221 221 221 190 190 190 190 190 190 +-190 190 190 187 187 187 187 187 187 190 190 190 +-190 190 190 195 195 195 214 214 214 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +- 82 82 82 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 14 14 14 +- 86 86 86 54 54 54 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 18 18 18 46 46 46 90 90 90 +- 46 46 46 18 18 18 6 6 6 182 182 182 +-253 253 253 246 246 246 206 206 206 190 190 190 +-190 190 190 190 190 190 190 190 190 190 190 190 +-206 206 206 231 231 231 250 250 250 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-202 202 202 14 14 14 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 42 42 42 86 86 86 42 42 42 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 14 14 14 38 38 38 74 74 74 66 66 66 +- 2 2 6 6 6 6 90 90 90 250 250 250 +-253 253 253 253 253 253 238 238 238 198 198 198 +-190 190 190 190 190 190 195 195 195 221 221 221 +-246 246 246 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 82 82 82 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 78 78 78 70 70 70 34 34 34 +- 14 14 14 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 34 34 34 66 66 66 78 78 78 6 6 6 +- 2 2 6 18 18 18 218 218 218 253 253 253 +-253 253 253 253 253 253 253 253 253 246 246 246 +-226 226 226 231 231 231 246 246 246 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 178 178 178 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 18 18 18 90 90 90 62 62 62 +- 30 30 30 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 10 10 10 26 26 26 +- 58 58 58 90 90 90 18 18 18 2 2 6 +- 2 2 6 110 110 110 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-250 250 250 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 231 231 231 18 18 18 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 18 18 18 94 94 94 +- 54 54 54 26 26 26 10 10 10 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 22 22 22 50 50 50 +- 90 90 90 26 26 26 2 2 6 2 2 6 +- 14 14 14 195 195 195 250 250 250 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-250 250 250 242 242 242 54 54 54 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 38 38 38 +- 86 86 86 50 50 50 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 14 14 14 38 38 38 82 82 82 +- 34 34 34 2 2 6 2 2 6 2 2 6 +- 42 42 42 195 195 195 246 246 246 253 253 253 +-253 253 253 253 253 253 253 253 253 250 250 250 +-242 242 242 242 242 242 250 250 250 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 250 250 250 246 246 246 238 238 238 +-226 226 226 231 231 231 101 101 101 6 6 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 38 38 38 82 82 82 42 42 42 14 14 14 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 10 10 10 26 26 26 62 62 62 66 66 66 +- 2 2 6 2 2 6 2 2 6 6 6 6 +- 70 70 70 170 170 170 206 206 206 234 234 234 +-246 246 246 250 250 250 250 250 250 238 238 238 +-226 226 226 231 231 231 238 238 238 250 250 250 +-250 250 250 250 250 250 246 246 246 231 231 231 +-214 214 214 206 206 206 202 202 202 202 202 202 +-198 198 198 202 202 202 182 182 182 18 18 18 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 62 62 62 66 66 66 30 30 30 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 14 14 14 42 42 42 82 82 82 18 18 18 +- 2 2 6 2 2 6 2 2 6 10 10 10 +- 94 94 94 182 182 182 218 218 218 242 242 242 +-250 250 250 253 253 253 253 253 253 250 250 250 +-234 234 234 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 246 246 246 +-238 238 238 226 226 226 210 210 210 202 202 202 +-195 195 195 195 195 195 210 210 210 158 158 158 +- 6 6 6 14 14 14 50 50 50 14 14 14 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 6 6 6 86 86 86 46 46 46 +- 18 18 18 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 22 22 22 54 54 54 70 70 70 2 2 6 +- 2 2 6 10 10 10 2 2 6 22 22 22 +-166 166 166 231 231 231 250 250 250 253 253 253 +-253 253 253 253 253 253 253 253 253 250 250 250 +-242 242 242 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 246 246 246 +-231 231 231 206 206 206 198 198 198 226 226 226 +- 94 94 94 2 2 6 6 6 6 38 38 38 +- 30 30 30 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 62 62 62 66 66 66 +- 26 26 26 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 74 74 74 50 50 50 2 2 6 +- 26 26 26 26 26 26 2 2 6 106 106 106 +-238 238 238 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 246 246 246 218 218 218 202 202 202 +-210 210 210 14 14 14 2 2 6 2 2 6 +- 30 30 30 22 22 22 2 2 6 2 2 6 +- 2 2 6 2 2 6 18 18 18 86 86 86 +- 42 42 42 14 14 14 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 42 42 42 90 90 90 22 22 22 2 2 6 +- 42 42 42 2 2 6 18 18 18 218 218 218 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 250 250 250 221 221 221 +-218 218 218 101 101 101 2 2 6 14 14 14 +- 18 18 18 38 38 38 10 10 10 2 2 6 +- 2 2 6 2 2 6 2 2 6 78 78 78 +- 58 58 58 22 22 22 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 54 54 54 82 82 82 2 2 6 26 26 26 +- 22 22 22 2 2 6 123 123 123 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 250 250 250 +-238 238 238 198 198 198 6 6 6 38 38 38 +- 58 58 58 26 26 26 38 38 38 2 2 6 +- 2 2 6 2 2 6 2 2 6 46 46 46 +- 78 78 78 30 30 30 10 10 10 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 10 10 10 30 30 30 +- 74 74 74 58 58 58 2 2 6 42 42 42 +- 2 2 6 22 22 22 231 231 231 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 250 250 250 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 246 246 246 46 46 46 38 38 38 +- 42 42 42 14 14 14 38 38 38 14 14 14 +- 2 2 6 2 2 6 2 2 6 6 6 6 +- 86 86 86 46 46 46 14 14 14 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 14 14 14 42 42 42 +- 90 90 90 18 18 18 18 18 18 26 26 26 +- 2 2 6 116 116 116 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 250 250 250 238 238 238 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 94 94 94 6 6 6 +- 2 2 6 2 2 6 10 10 10 34 34 34 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 74 74 74 58 58 58 22 22 22 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 10 10 10 26 26 26 66 66 66 +- 82 82 82 2 2 6 38 38 38 6 6 6 +- 14 14 14 210 210 210 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 246 246 246 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 144 144 144 2 2 6 +- 2 2 6 2 2 6 2 2 6 46 46 46 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 42 42 42 74 74 74 30 30 30 10 10 10 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 14 14 14 42 42 42 90 90 90 +- 26 26 26 6 6 6 42 42 42 2 2 6 +- 74 74 74 250 250 250 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 242 242 242 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 182 182 182 2 2 6 +- 2 2 6 2 2 6 2 2 6 46 46 46 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 10 10 10 86 86 86 38 38 38 10 10 10 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 10 10 10 26 26 26 66 66 66 82 82 82 +- 2 2 6 22 22 22 18 18 18 2 2 6 +-149 149 149 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 234 234 234 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 206 206 206 2 2 6 +- 2 2 6 2 2 6 2 2 6 38 38 38 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 6 6 6 86 86 86 46 46 46 14 14 14 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 18 18 18 46 46 46 86 86 86 18 18 18 +- 2 2 6 34 34 34 10 10 10 6 6 6 +-210 210 210 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 234 234 234 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 221 221 221 6 6 6 +- 2 2 6 2 2 6 6 6 6 30 30 30 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 82 82 82 54 54 54 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 26 26 26 66 66 66 62 62 62 2 2 6 +- 2 2 6 38 38 38 10 10 10 26 26 26 +-238 238 238 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 238 238 238 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 6 6 6 +- 2 2 6 2 2 6 10 10 10 30 30 30 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 66 66 66 58 58 58 22 22 22 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 38 38 38 78 78 78 6 6 6 2 2 6 +- 2 2 6 46 46 46 14 14 14 42 42 42 +-246 246 246 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 234 234 234 10 10 10 +- 2 2 6 2 2 6 22 22 22 14 14 14 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 66 66 66 62 62 62 22 22 22 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 50 50 50 74 74 74 2 2 6 2 2 6 +- 14 14 14 70 70 70 34 34 34 62 62 62 +-250 250 250 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 246 246 246 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 234 234 234 14 14 14 +- 2 2 6 2 2 6 30 30 30 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 66 66 66 62 62 62 22 22 22 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 54 54 54 62 62 62 2 2 6 2 2 6 +- 2 2 6 30 30 30 46 46 46 70 70 70 +-250 250 250 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 246 246 246 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 226 226 226 10 10 10 +- 2 2 6 6 6 6 30 30 30 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 66 66 66 58 58 58 22 22 22 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 22 22 22 +- 58 58 58 62 62 62 2 2 6 2 2 6 +- 2 2 6 2 2 6 30 30 30 78 78 78 +-250 250 250 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 246 246 246 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 206 206 206 2 2 6 +- 22 22 22 34 34 34 18 14 6 22 22 22 +- 26 26 26 18 18 18 6 6 6 2 2 6 +- 2 2 6 82 82 82 54 54 54 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 26 26 26 +- 62 62 62 106 106 106 74 54 14 185 133 11 +-210 162 10 121 92 8 6 6 6 62 62 62 +-238 238 238 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 246 246 246 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 158 158 158 18 18 18 +- 14 14 14 2 2 6 2 2 6 2 2 6 +- 6 6 6 18 18 18 66 66 66 38 38 38 +- 6 6 6 94 94 94 50 50 50 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 10 10 10 10 10 10 18 18 18 38 38 38 +- 78 78 78 142 134 106 216 158 10 242 186 14 +-246 190 14 246 190 14 156 118 10 10 10 10 +- 90 90 90 238 238 238 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 250 250 250 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 246 230 190 +-238 204 91 238 204 91 181 142 44 37 26 9 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 38 38 38 46 46 46 +- 26 26 26 106 106 106 54 54 54 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 14 14 14 22 22 22 +- 30 30 30 38 38 38 50 50 50 70 70 70 +-106 106 106 190 142 34 226 170 11 242 186 14 +-246 190 14 246 190 14 246 190 14 154 114 10 +- 6 6 6 74 74 74 226 226 226 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 231 231 231 250 250 250 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 228 184 62 +-241 196 14 241 208 19 232 195 16 38 30 10 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 6 6 6 30 30 30 26 26 26 +-203 166 17 154 142 90 66 66 66 26 26 26 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 18 18 18 38 38 38 58 58 58 +- 78 78 78 86 86 86 101 101 101 123 123 123 +-175 146 61 210 150 10 234 174 13 246 186 14 +-246 190 14 246 190 14 246 190 14 238 190 10 +-102 78 10 2 2 6 46 46 46 198 198 198 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 234 234 234 242 242 242 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 224 178 62 +-242 186 14 241 196 14 210 166 10 22 18 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 6 6 6 121 92 8 +-238 202 15 232 195 16 82 82 82 34 34 34 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 14 14 14 38 38 38 70 70 70 154 122 46 +-190 142 34 200 144 11 197 138 11 197 138 11 +-213 154 11 226 170 11 242 186 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-225 175 15 46 32 6 2 2 6 22 22 22 +-158 158 158 250 250 250 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 250 250 250 242 242 242 224 178 62 +-239 182 13 236 186 11 213 154 11 46 32 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 61 42 6 225 175 15 +-238 190 10 236 186 11 112 100 78 42 42 42 +- 14 14 14 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 22 22 22 54 54 54 154 122 46 213 154 11 +-226 170 11 230 174 11 226 170 11 226 170 11 +-236 178 12 242 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-241 196 14 184 144 12 10 10 10 2 2 6 +- 6 6 6 116 116 116 242 242 242 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 231 231 231 198 198 198 214 170 54 +-236 178 12 236 178 12 210 150 10 137 92 6 +- 18 14 6 2 2 6 2 2 6 2 2 6 +- 6 6 6 70 47 6 200 144 11 236 178 12 +-239 182 13 239 182 13 124 112 88 58 58 58 +- 22 22 22 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 70 70 70 180 133 36 226 170 11 +-239 182 13 242 186 14 242 186 14 246 186 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 232 195 16 98 70 6 2 2 6 +- 2 2 6 2 2 6 66 66 66 221 221 221 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 206 206 206 198 198 198 214 166 58 +-230 174 11 230 174 11 216 158 10 192 133 9 +-163 110 8 116 81 8 102 78 10 116 81 8 +-167 114 7 197 138 11 226 170 11 239 182 13 +-242 186 14 242 186 14 162 146 94 78 78 78 +- 34 34 34 14 14 14 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 30 30 30 78 78 78 190 142 34 226 170 11 +-239 182 13 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 241 196 14 203 166 17 22 18 6 +- 2 2 6 2 2 6 2 2 6 38 38 38 +-218 218 218 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-250 250 250 206 206 206 198 198 198 202 162 69 +-226 170 11 236 178 12 224 166 10 210 150 10 +-200 144 11 197 138 11 192 133 9 197 138 11 +-210 150 10 226 170 11 242 186 14 246 190 14 +-246 190 14 246 186 14 225 175 15 124 112 88 +- 62 62 62 30 30 30 14 14 14 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 78 78 78 174 135 50 224 166 10 +-239 182 13 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 241 196 14 139 102 15 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 78 78 78 250 250 250 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-250 250 250 214 214 214 198 198 198 190 150 46 +-219 162 10 236 178 12 234 174 13 224 166 10 +-216 158 10 213 154 11 213 154 11 216 158 10 +-226 170 11 239 182 13 246 190 14 246 190 14 +-246 190 14 246 190 14 242 186 14 206 162 42 +-101 101 101 58 58 58 30 30 30 14 14 14 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 74 74 74 174 135 50 216 158 10 +-236 178 12 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 241 196 14 226 184 13 +- 61 42 6 2 2 6 2 2 6 2 2 6 +- 22 22 22 238 238 238 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 226 226 226 187 187 187 180 133 36 +-216 158 10 236 178 12 239 182 13 236 178 12 +-230 174 11 226 170 11 226 170 11 230 174 11 +-236 178 12 242 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 186 14 239 182 13 +-206 162 42 106 106 106 66 66 66 34 34 34 +- 14 14 14 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 26 26 26 70 70 70 163 133 67 213 154 11 +-236 178 12 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 241 196 14 +-190 146 13 18 14 6 2 2 6 2 2 6 +- 46 46 46 246 246 246 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 221 221 221 86 86 86 156 107 11 +-216 158 10 236 178 12 242 186 14 246 186 14 +-242 186 14 239 182 13 239 182 13 242 186 14 +-242 186 14 246 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-242 186 14 225 175 15 142 122 72 66 66 66 +- 30 30 30 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 26 26 26 70 70 70 163 133 67 210 150 10 +-236 178 12 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-232 195 16 121 92 8 34 34 34 106 106 106 +-221 221 221 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-242 242 242 82 82 82 18 14 6 163 110 8 +-216 158 10 236 178 12 242 186 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 242 186 14 163 133 67 +- 46 46 46 18 18 18 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 10 10 10 +- 30 30 30 78 78 78 163 133 67 210 150 10 +-236 178 12 246 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-241 196 14 215 174 15 190 178 144 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 218 218 218 +- 58 58 58 2 2 6 22 18 6 167 114 7 +-216 158 10 236 178 12 246 186 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 186 14 242 186 14 190 150 46 +- 54 54 54 22 22 22 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 38 38 38 86 86 86 180 133 36 213 154 11 +-236 178 12 246 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 232 195 16 190 146 13 214 214 214 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 250 250 250 170 170 170 26 26 26 +- 2 2 6 2 2 6 37 26 9 163 110 8 +-219 162 10 239 182 13 246 186 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 186 14 236 178 12 224 166 10 142 122 72 +- 46 46 46 18 18 18 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 50 50 50 109 106 95 192 133 9 224 166 10 +-242 186 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-242 186 14 226 184 13 210 162 10 142 110 46 +-226 226 226 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-253 253 253 253 253 253 253 253 253 253 253 253 +-198 198 198 66 66 66 2 2 6 2 2 6 +- 2 2 6 2 2 6 50 34 6 156 107 11 +-219 162 10 239 182 13 246 186 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 242 186 14 +-234 174 13 213 154 11 154 122 46 66 66 66 +- 30 30 30 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 22 22 22 +- 58 58 58 154 121 60 206 145 10 234 174 13 +-242 186 14 246 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 186 14 236 178 12 210 162 10 163 110 8 +- 61 42 6 138 138 138 218 218 218 250 250 250 +-253 253 253 253 253 253 253 253 253 250 250 250 +-242 242 242 210 210 210 144 144 144 66 66 66 +- 6 6 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 61 42 6 163 110 8 +-216 158 10 236 178 12 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 239 182 13 230 174 11 216 158 10 +-190 142 34 124 112 88 70 70 70 38 38 38 +- 18 18 18 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 22 22 22 +- 62 62 62 168 124 44 206 145 10 224 166 10 +-236 178 12 239 182 13 242 186 14 242 186 14 +-246 186 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 236 178 12 216 158 10 175 118 6 +- 80 54 7 2 2 6 6 6 6 30 30 30 +- 54 54 54 62 62 62 50 50 50 38 38 38 +- 14 14 14 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 6 6 6 80 54 7 167 114 7 +-213 154 11 236 178 12 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 190 14 242 186 14 239 182 13 239 182 13 +-230 174 11 210 150 10 174 135 50 124 112 88 +- 82 82 82 54 54 54 34 34 34 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 18 18 18 +- 50 50 50 158 118 36 192 133 9 200 144 11 +-216 158 10 219 162 10 224 166 10 226 170 11 +-230 174 11 236 178 12 239 182 13 239 182 13 +-242 186 14 246 186 14 246 190 14 246 190 14 +-246 190 14 246 190 14 246 190 14 246 190 14 +-246 186 14 230 174 11 210 150 10 163 110 8 +-104 69 6 10 10 10 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 6 6 6 91 60 6 167 114 7 +-206 145 10 230 174 11 242 186 14 246 190 14 +-246 190 14 246 190 14 246 186 14 242 186 14 +-239 182 13 230 174 11 224 166 10 213 154 11 +-180 133 36 124 112 88 86 86 86 58 58 58 +- 38 38 38 22 22 22 10 10 10 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 14 14 14 +- 34 34 34 70 70 70 138 110 50 158 118 36 +-167 114 7 180 123 7 192 133 9 197 138 11 +-200 144 11 206 145 10 213 154 11 219 162 10 +-224 166 10 230 174 11 239 182 13 242 186 14 +-246 186 14 246 186 14 246 186 14 246 186 14 +-239 182 13 216 158 10 185 133 11 152 99 6 +-104 69 6 18 14 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 2 2 6 2 2 6 2 2 6 +- 2 2 6 6 6 6 80 54 7 152 99 6 +-192 133 9 219 162 10 236 178 12 239 182 13 +-246 186 14 242 186 14 239 182 13 236 178 12 +-224 166 10 206 145 10 192 133 9 154 121 60 +- 94 94 94 62 62 62 42 42 42 22 22 22 +- 14 14 14 6 6 6 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 18 18 18 34 34 34 58 58 58 78 78 78 +-101 98 89 124 112 88 142 110 46 156 107 11 +-163 110 8 167 114 7 175 118 6 180 123 7 +-185 133 11 197 138 11 210 150 10 219 162 10 +-226 170 11 236 178 12 236 178 12 234 174 13 +-219 162 10 197 138 11 163 110 8 130 83 6 +- 91 60 6 10 10 10 2 2 6 2 2 6 +- 18 18 18 38 38 38 38 38 38 38 38 38 +- 38 38 38 38 38 38 38 38 38 38 38 38 +- 38 38 38 38 38 38 26 26 26 2 2 6 +- 2 2 6 6 6 6 70 47 6 137 92 6 +-175 118 6 200 144 11 219 162 10 230 174 11 +-234 174 13 230 174 11 219 162 10 210 150 10 +-192 133 9 163 110 8 124 112 88 82 82 82 +- 50 50 50 30 30 30 14 14 14 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 14 14 14 22 22 22 34 34 34 +- 42 42 42 58 58 58 74 74 74 86 86 86 +-101 98 89 122 102 70 130 98 46 121 87 25 +-137 92 6 152 99 6 163 110 8 180 123 7 +-185 133 11 197 138 11 206 145 10 200 144 11 +-180 123 7 156 107 11 130 83 6 104 69 6 +- 50 34 6 54 54 54 110 110 110 101 98 89 +- 86 86 86 82 82 82 78 78 78 78 78 78 +- 78 78 78 78 78 78 78 78 78 78 78 78 +- 78 78 78 82 82 82 86 86 86 94 94 94 +-106 106 106 101 101 101 86 66 34 124 80 6 +-156 107 11 180 123 7 192 133 9 200 144 11 +-206 145 10 200 144 11 192 133 9 175 118 6 +-139 102 15 109 106 95 70 70 70 42 42 42 +- 22 22 22 10 10 10 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 6 6 6 10 10 10 +- 14 14 14 22 22 22 30 30 30 38 38 38 +- 50 50 50 62 62 62 74 74 74 90 90 90 +-101 98 89 112 100 78 121 87 25 124 80 6 +-137 92 6 152 99 6 152 99 6 152 99 6 +-138 86 6 124 80 6 98 70 6 86 66 30 +-101 98 89 82 82 82 58 58 58 46 46 46 +- 38 38 38 34 34 34 34 34 34 34 34 34 +- 34 34 34 34 34 34 34 34 34 34 34 34 +- 34 34 34 34 34 34 38 38 38 42 42 42 +- 54 54 54 82 82 82 94 86 76 91 60 6 +-134 86 6 156 107 11 167 114 7 175 118 6 +-175 118 6 167 114 7 152 99 6 121 87 25 +-101 98 89 62 62 62 34 34 34 18 18 18 +- 6 6 6 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 6 6 6 10 10 10 +- 18 18 18 22 22 22 30 30 30 42 42 42 +- 50 50 50 66 66 66 86 86 86 101 98 89 +-106 86 58 98 70 6 104 69 6 104 69 6 +-104 69 6 91 60 6 82 62 34 90 90 90 +- 62 62 62 38 38 38 22 22 22 14 14 14 +- 10 10 10 10 10 10 10 10 10 10 10 10 +- 10 10 10 10 10 10 6 6 6 10 10 10 +- 10 10 10 10 10 10 10 10 10 14 14 14 +- 22 22 22 42 42 42 70 70 70 89 81 66 +- 80 54 7 104 69 6 124 80 6 137 92 6 +-134 86 6 116 81 8 100 82 52 86 86 86 +- 58 58 58 30 30 30 14 14 14 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 10 10 10 14 14 14 +- 18 18 18 26 26 26 38 38 38 54 54 54 +- 70 70 70 86 86 86 94 86 76 89 81 66 +- 89 81 66 86 86 86 74 74 74 50 50 50 +- 30 30 30 14 14 14 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 18 18 18 34 34 34 58 58 58 +- 82 82 82 89 81 66 89 81 66 89 81 66 +- 94 86 66 94 86 76 74 74 74 50 50 50 +- 26 26 26 14 14 14 6 6 6 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 6 6 6 6 6 6 14 14 14 18 18 18 +- 30 30 30 38 38 38 46 46 46 54 54 54 +- 50 50 50 42 42 42 30 30 30 18 18 18 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 6 6 6 14 14 14 26 26 26 +- 38 38 38 50 50 50 58 58 58 58 58 58 +- 54 54 54 42 42 42 30 30 30 18 18 18 +- 10 10 10 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 6 6 6 10 10 10 14 14 14 18 18 18 +- 18 18 18 14 14 14 10 10 10 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 6 6 6 +- 14 14 14 18 18 18 22 22 22 22 22 22 +- 18 18 18 14 14 14 10 10 10 6 6 6 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 +- 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 1 0 ++0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 ++0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 ++10 15 3 2 3 1 12 18 4 42 61 14 19 27 6 11 16 4 ++38 55 13 10 15 3 3 4 1 10 15 3 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 3 1 ++12 18 4 1 1 0 23 34 8 31 45 11 10 15 3 32 47 11 ++34 49 12 3 4 1 3 4 1 3 4 1 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 10 15 3 29 42 10 26 37 9 12 18 4 ++55 80 19 81 118 28 55 80 19 92 132 31 106 153 36 69 100 23 ++100 144 34 80 116 27 42 61 14 81 118 28 23 34 8 27 40 9 ++15 21 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 1 1 0 29 42 10 15 21 5 50 72 17 ++74 107 25 45 64 15 102 148 35 80 116 27 84 121 28 111 160 38 ++69 100 23 65 94 22 81 118 28 29 42 10 17 25 6 29 42 10 ++23 34 8 2 3 1 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 4 1 ++15 21 5 15 21 5 34 49 12 101 146 34 111 161 38 97 141 33 ++97 141 33 119 172 41 117 170 40 116 167 40 118 170 40 118 171 40 ++117 169 40 118 170 40 111 160 38 118 170 40 96 138 32 89 128 30 ++81 118 28 11 16 4 10 15 3 1 1 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++3 4 1 3 4 1 34 49 12 101 146 34 79 115 27 111 160 38 ++114 165 39 113 163 39 118 170 40 117 169 40 118 171 40 117 169 40 ++116 167 40 119 172 41 113 163 39 92 132 31 105 151 36 113 163 39 ++75 109 26 19 27 6 16 23 5 11 16 4 0 1 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 10 15 3 ++80 116 27 106 153 36 105 151 36 114 165 39 118 170 40 118 171 40 ++118 171 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 170 40 117 169 40 118 170 40 118 170 40 ++117 170 40 75 109 26 75 109 26 34 49 12 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 4 1 ++64 92 22 65 94 22 100 144 34 118 171 40 118 170 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 118 171 41 118 170 40 117 169 40 ++109 158 37 105 151 36 104 150 35 47 69 16 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++42 61 14 115 167 39 118 170 40 117 169 40 117 169 40 117 169 40 ++117 170 40 117 170 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 118 170 40 96 138 32 17 25 6 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 47 69 16 ++114 165 39 117 168 40 117 170 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 118 170 40 117 169 40 117 169 40 117 169 40 ++117 170 40 119 172 41 96 138 32 12 18 4 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 10 15 3 ++32 47 11 105 151 36 118 170 40 117 169 40 117 169 40 116 168 40 ++109 157 37 111 160 38 117 169 40 118 171 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 118 171 40 69 100 23 2 3 1 ++0 0 0 0 0 0 0 0 0 0 0 0 19 27 6 101 146 34 ++118 171 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 170 40 ++118 171 40 115 166 39 107 154 36 111 161 38 117 169 40 117 169 40 ++117 169 40 118 171 40 75 109 26 19 27 6 2 3 1 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 16 23 5 ++89 128 30 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++111 160 38 92 132 31 79 115 27 96 138 32 115 166 39 119 171 41 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 118 170 40 109 157 37 26 37 9 ++0 0 0 0 0 0 0 0 0 0 0 0 64 92 22 118 171 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 118 170 40 118 171 40 109 157 37 ++89 128 30 81 118 28 100 144 34 115 166 39 117 169 40 117 169 40 ++117 169 40 117 170 40 113 163 39 60 86 20 1 1 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++27 40 9 96 138 32 118 170 40 117 169 40 117 169 40 117 169 40 ++117 170 40 117 169 40 101 146 34 67 96 23 55 80 19 84 121 28 ++113 163 39 119 171 41 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 119 171 41 65 94 22 ++0 0 0 0 0 0 0 0 0 15 21 5 101 146 34 118 171 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 118 170 40 118 171 40 104 150 35 69 100 23 53 76 18 ++81 118 28 111 160 38 118 170 40 117 169 40 117 169 40 117 169 40 ++117 169 40 114 165 39 69 100 23 10 15 3 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 ++31 45 11 77 111 26 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 118 170 40 116 168 40 92 132 31 47 69 16 ++38 55 13 81 118 28 113 163 39 119 171 41 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 118 171 41 92 132 31 ++10 15 3 0 0 0 0 0 0 36 52 12 115 166 39 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 118 170 40 ++118 171 40 102 148 35 64 92 22 34 49 12 65 94 22 106 153 36 ++118 171 40 117 170 40 117 169 40 117 169 40 117 169 40 117 169 40 ++118 170 40 107 154 36 55 80 19 15 21 5 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++29 42 10 101 146 34 118 171 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 118 171 40 113 163 39 ++75 109 26 27 40 9 36 52 12 89 128 30 116 167 40 118 171 40 ++117 169 40 117 169 40 117 169 40 117 169 40 118 170 40 104 150 35 ++16 23 5 0 0 0 0 0 0 53 76 18 118 171 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 119 171 41 109 157 37 ++67 96 23 23 34 8 42 61 14 96 138 32 118 170 40 118 170 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 74 107 25 10 15 3 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 31 45 11 101 146 34 118 170 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++119 171 41 102 148 35 47 69 16 14 20 5 50 72 17 102 148 35 ++118 171 40 117 169 40 117 169 40 117 169 40 118 170 40 102 148 35 ++15 21 5 0 0 0 0 0 0 50 72 17 118 170 40 117 169 40 ++117 169 40 117 169 40 118 170 40 116 167 40 84 121 28 27 40 9 ++19 27 6 74 107 25 114 165 39 118 171 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 75 109 26 10 15 4 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 38 55 13 102 148 35 118 171 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 118 170 40 115 167 39 77 111 26 17 25 6 19 27 6 ++77 111 26 115 166 39 118 170 40 117 169 40 119 172 41 81 118 28 ++3 4 1 0 0 0 0 0 0 27 40 9 111 160 38 118 170 40 ++117 169 40 118 171 40 105 151 36 50 72 17 10 15 3 38 55 13 ++100 144 34 118 171 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 79 115 27 15 21 5 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 10 15 3 64 92 22 111 160 38 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 118 171 40 96 138 32 32 47 11 ++3 4 1 50 72 17 107 154 36 120 173 41 105 151 36 31 45 11 ++0 0 0 0 0 0 0 0 0 3 4 1 65 94 22 117 169 40 ++118 170 40 89 128 30 26 37 9 3 4 1 60 86 20 111 161 38 ++118 171 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++97 141 33 36 52 12 1 1 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 14 20 5 75 109 26 117 168 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 118 171 40 107 154 36 ++45 64 15 2 3 1 31 45 11 75 109 26 32 47 11 0 1 0 ++0 0 0 0 0 0 0 0 0 0 0 0 10 15 3 55 80 19 ++65 94 22 11 16 4 11 16 4 75 109 26 116 168 40 118 170 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 118 170 40 107 154 36 ++47 69 16 3 4 1 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 12 18 4 69 100 23 111 161 38 118 171 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 118 170 40 ++111 160 38 50 72 17 2 3 1 2 3 1 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 ++1 1 0 12 18 4 81 118 28 118 170 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 170 40 118 171 40 101 146 34 ++42 61 14 2 3 1 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 3 4 1 36 52 12 89 128 30 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++118 171 41 101 146 34 14 20 5 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 47 69 16 118 170 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 170 40 111 160 38 69 100 23 19 27 6 ++0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 11 16 4 69 100 23 ++115 167 39 119 172 41 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++119 172 41 75 109 26 3 4 1 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 23 34 8 106 153 36 118 170 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++117 169 40 118 170 40 119 172 41 105 151 36 42 61 14 2 3 1 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 15 21 5 ++45 64 15 80 116 27 114 165 39 118 170 40 117 169 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 119 172 41 ++97 141 33 20 30 7 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 1 1 0 53 76 18 114 165 39 118 171 40 117 169 40 ++117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 117 169 40 ++118 171 40 104 150 35 64 92 22 31 45 11 10 15 3 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 36 52 12 97 141 33 109 158 37 113 163 39 116 168 40 ++117 169 40 117 170 40 118 170 40 119 172 41 115 167 39 84 121 28 ++23 34 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 3 4 1 50 72 17 102 148 35 118 171 40 ++119 171 41 118 170 40 117 169 40 117 169 40 115 166 39 111 161 38 ++109 157 37 79 115 27 12 18 4 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 3 4 1 15 21 5 23 34 8 45 64 15 106 153 36 ++116 167 40 111 160 38 101 146 34 79 115 27 42 61 14 10 15 3 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 1 1 0 20 30 7 60 86 20 ++89 128 30 106 153 36 113 163 39 117 169 40 84 121 28 29 42 10 ++19 27 6 10 15 3 2 3 1 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 16 23 5 38 55 13 ++36 52 12 26 37 9 12 18 4 2 3 1 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 1 0 0 19 2 7 52 5 18 ++78 7 27 88 8 31 81 7 29 56 5 19 25 2 9 3 0 1 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++3 4 1 19 27 6 31 45 11 38 55 13 32 47 11 3 4 1 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 1 ++9 0 3 12 1 4 9 0 3 4 0 1 0 0 0 0 0 0 ++0 0 0 0 0 0 28 3 10 99 9 35 156 14 55 182 16 64 ++189 17 66 190 17 67 189 17 66 184 17 65 166 15 58 118 13 41 ++45 4 16 3 0 1 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 11 1 4 52 5 18 101 9 35 134 12 47 ++151 14 53 154 14 54 151 14 53 113 10 40 11 1 4 0 0 0 ++3 0 1 67 6 24 159 14 56 190 17 67 190 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 191 17 67 ++174 16 61 101 9 35 14 1 5 0 0 0 35 3 12 108 10 38 ++122 11 43 122 11 43 112 10 39 87 8 30 50 5 17 13 1 5 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++3 0 1 56 5 19 141 13 49 182 16 64 191 17 67 191 17 67 ++190 17 67 190 17 67 191 17 67 113 10 40 3 0 1 1 0 0 ++79 7 28 180 16 63 190 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++189 17 66 188 17 66 122 11 43 11 1 4 41 4 14 176 16 62 ++191 17 67 191 17 67 191 17 67 190 17 67 181 16 63 146 13 51 ++75 7 26 10 1 4 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 1 2 ++90 8 32 178 16 62 191 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 190 17 67 141 13 49 22 2 8 0 0 0 41 4 14 ++173 16 61 190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 88 8 31 1 0 0 89 8 31 ++185 17 65 189 17 66 188 17 66 188 17 66 189 17 66 191 17 67 ++186 17 65 124 11 43 25 2 9 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 2 0 1 89 8 31 ++184 17 65 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++190 17 67 151 14 53 34 3 12 0 0 0 0 0 0 79 7 28 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 191 17 67 146 13 51 9 1 3 7 1 2 ++108 10 38 187 17 66 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 190 17 67 141 13 49 22 2 8 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 52 5 18 176 16 62 ++189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 ++151 14 53 38 3 13 0 0 0 0 0 0 0 0 0 50 5 17 ++180 16 63 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 191 17 67 141 13 49 7 1 3 0 0 0 ++11 1 4 112 10 39 187 17 66 189 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 190 17 67 113 10 40 5 0 2 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 7 1 3 132 12 46 191 17 67 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 146 13 51 ++35 3 12 0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 ++101 9 35 185 17 65 190 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 190 17 67 180 16 63 67 6 24 0 0 0 0 0 0 ++0 0 0 11 1 4 108 10 38 186 17 65 189 17 66 188 17 66 ++188 17 66 188 17 66 189 17 66 180 16 63 56 5 19 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 44 4 15 177 16 62 189 17 66 ++188 17 66 188 17 66 189 17 66 189 17 66 134 12 47 28 3 10 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++8 1 3 79 7 28 159 14 56 188 17 66 191 17 67 190 17 67 ++189 17 66 189 17 66 189 17 66 189 17 66 190 17 67 191 17 67 ++188 17 66 158 14 55 72 7 25 4 0 1 0 0 0 0 0 0 ++0 0 0 0 0 0 8 1 3 95 9 33 182 16 64 189 17 67 ++188 17 66 188 17 66 188 17 66 191 17 67 122 11 43 3 0 1 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 88 8 31 190 17 67 188 17 66 ++188 17 66 189 17 66 185 17 65 113 10 40 18 2 6 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 1 0 0 24 2 8 77 7 27 124 11 43 154 14 54 ++168 15 59 173 16 61 173 16 61 168 15 59 154 14 54 124 11 43 ++77 7 27 22 2 8 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 5 0 2 77 7 27 173 16 61 ++190 17 67 188 17 66 188 17 66 190 17 67 164 15 57 23 2 8 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 1 0 0 118 13 41 191 17 67 188 17 66 ++190 17 67 174 16 61 87 8 30 8 1 3 0 0 0 0 0 0 ++0 0 0 0 0 0 10 1 4 29 3 10 40 4 14 36 3 13 ++18 2 6 2 0 1 0 0 0 0 0 0 3 0 1 14 1 5 ++26 2 9 33 3 11 32 3 11 25 2 9 13 1 5 3 0 1 ++0 0 0 14 1 5 56 5 19 95 9 33 109 10 38 101 9 35 ++77 7 27 35 3 12 5 0 2 0 0 0 1 0 0 56 5 19 ++156 14 55 190 17 67 188 17 66 188 17 66 182 16 64 50 5 17 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 5 0 2 134 12 47 191 17 67 189 17 66 ++151 14 53 52 5 18 2 0 1 0 0 0 0 0 0 1 0 0 ++28 3 10 90 8 32 146 13 51 170 15 60 178 16 62 174 16 61 ++158 14 55 112 10 39 40 4 14 1 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 1 ++56 5 19 146 13 51 183 17 64 191 17 67 191 17 67 191 17 67 ++188 17 66 173 16 61 122 11 43 41 4 14 1 0 0 0 0 0 ++30 3 10 124 11 43 185 17 65 190 17 67 187 17 66 67 6 24 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 6 1 2 134 12 47 168 15 59 99 9 35 ++21 2 7 0 0 0 0 0 0 0 0 0 6 1 2 77 7 27 ++162 15 57 190 17 67 191 17 67 189 17 66 189 17 66 189 17 66 ++190 17 67 191 17 67 169 15 59 75 7 26 3 0 1 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 2 0 1 79 7 28 ++178 16 62 191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 191 17 67 170 15 60 79 7 28 5 0 2 ++0 0 0 10 1 3 78 7 27 159 14 56 188 17 66 75 7 26 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 1 0 0 35 3 12 29 3 10 2 0 1 ++0 0 0 0 0 0 0 0 0 9 1 3 101 9 35 183 17 64 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 190 17 67 178 16 63 67 6 23 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 52 5 18 174 16 61 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 190 17 67 182 16 64 89 8 31 ++4 0 1 0 0 0 0 0 0 25 2 9 73 7 26 31 3 11 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 4 0 1 98 9 34 187 17 66 189 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 190 17 67 158 14 55 25 2 9 ++0 0 0 0 0 0 0 0 0 8 1 3 134 12 47 191 17 67 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 180 16 63 ++68 6 24 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 6 1 2 19 2 7 3 0 1 0 0 0 0 0 0 ++0 0 0 0 0 0 65 6 23 180 16 63 189 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 83 8 29 ++0 0 0 0 0 0 0 0 0 41 4 14 177 16 62 189 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 ++159 14 56 28 3 10 0 0 0 0 0 0 0 0 0 23 2 8 ++41 4 14 5 0 2 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++23 2 8 113 10 40 159 14 56 65 6 23 0 0 0 0 0 0 ++0 0 0 16 1 6 146 13 51 191 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 191 17 67 132 12 46 ++5 0 2 0 0 0 0 0 0 77 7 27 189 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++190 17 67 98 9 34 0 0 0 0 0 0 12 1 4 134 12 47 ++178 16 63 108 10 38 16 1 6 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 30 3 10 ++141 13 49 190 17 67 191 17 67 134 12 47 6 1 2 0 0 0 ++0 0 0 68 6 24 186 17 65 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 156 14 55 ++14 1 5 0 0 0 0 0 0 98 9 34 191 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++190 17 67 156 14 55 19 2 7 0 0 0 47 4 16 181 16 63 ++190 17 67 189 17 66 126 14 44 17 2 6 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 16 1 6 134 12 47 ++191 17 67 188 17 66 190 17 67 162 15 57 19 2 7 0 0 0 ++3 0 1 123 11 43 191 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 163 15 57 ++20 2 7 0 0 0 0 0 0 101 9 35 191 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 182 16 64 52 5 18 0 0 0 73 7 26 188 17 66 ++188 17 66 188 17 66 189 17 66 109 10 38 5 0 2 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 95 9 33 189 17 66 ++188 17 66 188 17 66 189 17 66 171 15 60 29 3 10 0 0 0 ++16 1 6 156 14 55 190 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 158 14 55 ++17 2 6 0 0 0 0 0 0 85 8 30 190 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 81 7 29 0 0 0 85 8 30 190 17 67 ++188 17 66 188 17 66 189 17 66 180 16 63 56 5 19 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 25 2 9 162 15 57 190 17 67 ++188 17 66 188 17 66 189 17 66 173 16 61 31 3 11 0 0 0 ++30 3 10 171 15 60 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 191 17 67 141 13 49 ++7 1 2 0 0 0 0 0 0 56 5 19 183 17 64 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 191 17 67 98 9 34 0 0 0 88 8 31 190 17 67 ++188 17 66 188 17 66 188 17 66 191 17 67 124 11 43 5 0 2 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 68 6 24 187 17 66 188 17 66 ++188 17 66 188 17 66 189 17 66 170 15 60 28 3 10 0 0 0 ++34 3 12 174 16 61 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 191 17 67 101 9 35 ++0 0 0 0 0 0 0 0 0 21 2 7 159 14 56 190 17 67 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 191 17 67 98 9 34 0 0 0 81 7 29 189 17 66 ++188 17 66 188 17 66 188 17 66 189 17 66 168 15 59 28 3 10 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 109 10 38 191 17 67 188 17 66 ++188 17 66 188 17 66 190 17 67 163 15 57 21 2 7 0 0 0 ++26 2 9 168 15 59 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 189 17 66 180 16 63 47 4 16 ++0 0 0 0 0 0 0 0 0 0 0 0 108 10 38 190 17 67 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 78 7 27 0 0 0 68 6 24 187 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 183 17 64 56 5 19 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 3 0 1 131 12 46 191 17 67 188 17 66 ++188 17 66 188 17 66 190 17 67 151 14 53 12 1 4 0 0 0 ++11 1 4 146 13 51 190 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 191 17 67 126 14 44 7 1 2 ++0 0 0 0 0 0 0 0 0 0 0 0 32 3 11 164 15 58 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++189 17 66 178 16 62 44 4 15 0 0 0 50 5 17 182 16 64 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 72 7 25 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 5 0 2 134 12 47 191 17 67 188 17 66 ++188 17 66 188 17 66 191 17 67 131 12 46 3 0 1 0 0 0 ++0 0 0 101 9 35 190 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 190 17 67 170 15 60 44 4 15 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 77 7 27 ++183 17 64 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++191 17 67 134 12 47 9 1 3 0 0 0 31 3 11 171 15 60 ++189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 72 7 25 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 2 0 1 124 11 43 191 17 67 188 17 66 ++188 17 66 188 17 66 191 17 67 101 9 35 0 0 0 0 0 0 ++0 0 0 35 3 12 168 15 59 190 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 182 16 64 77 7 27 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6 1 2 ++99 9 35 185 17 65 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 ++177 16 62 56 5 19 0 0 0 0 0 0 13 1 5 151 14 53 ++190 17 67 188 17 66 188 17 66 188 17 66 185 17 65 56 5 19 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 99 9 35 191 17 67 188 17 66 ++188 17 66 188 17 66 186 17 65 65 6 23 0 0 0 0 0 0 ++0 0 0 0 0 0 79 7 28 182 16 64 190 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++191 17 67 177 16 62 83 8 29 4 0 1 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++8 1 3 89 8 31 175 16 62 191 17 67 189 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 181 16 63 ++85 8 30 3 0 1 0 0 0 0 0 0 1 0 0 118 13 41 ++191 17 67 188 17 66 188 17 66 189 17 66 173 16 61 34 3 12 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 56 5 19 183 17 64 188 17 66 ++188 17 66 189 17 66 169 15 59 30 3 10 0 0 0 0 0 0 ++0 0 0 0 0 0 5 0 2 83 8 29 173 16 61 191 17 67 ++190 17 67 189 17 66 189 17 66 190 17 67 191 17 67 187 17 66 ++151 14 53 56 5 19 3 0 1 0 0 0 16 1 6 50 5 17 ++79 7 28 95 9 33 95 9 33 75 7 26 41 4 14 10 1 4 ++0 0 0 2 0 1 50 5 17 132 12 46 178 16 62 190 17 67 ++191 17 67 191 17 67 191 17 67 186 17 65 154 14 54 68 6 24 ++4 0 1 0 0 0 0 0 0 0 0 0 0 0 0 72 7 25 ++187 17 66 188 17 66 188 17 66 191 17 67 141 13 49 9 1 3 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 14 1 5 151 14 53 190 17 67 ++188 17 66 191 17 67 131 12 46 5 0 2 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 2 0 1 44 4 15 113 10 40 ++156 14 55 173 16 61 174 16 61 164 15 58 134 12 47 77 7 27 ++18 2 6 0 0 0 16 1 6 85 8 30 151 14 53 182 16 64 ++189 17 66 191 17 67 190 17 67 188 17 66 177 16 62 141 13 49 ++68 6 24 8 1 3 0 0 0 8 1 3 44 4 15 88 8 31 ++113 10 40 122 11 43 108 10 38 67 6 24 20 2 7 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 28 3 10 ++166 15 58 190 17 67 188 17 66 187 17 66 79 7 28 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 73 7 26 185 17 65 ++189 17 66 184 17 65 65 6 23 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 1 ++17 2 6 32 3 11 34 3 12 22 2 8 6 1 2 0 0 0 ++0 0 0 38 3 13 141 13 49 188 17 66 190 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 191 17 67 ++184 17 65 122 11 43 21 2 7 0 0 0 0 0 0 0 0 0 ++0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 ++108 10 38 191 17 67 191 17 67 141 13 49 16 1 6 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 8 1 3 112 10 39 ++186 17 65 124 11 43 10 1 4 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++36 3 13 156 14 55 191 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++189 17 66 190 17 67 134 12 47 18 2 6 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 7 1 2 41 4 14 75 7 26 66 5 23 19 2 7 ++26 2 9 144 13 50 154 14 54 40 4 14 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 13 1 5 ++56 5 19 19 2 7 0 0 0 7 1 2 29 3 10 35 3 12 ++19 2 7 2 0 1 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 13 1 5 ++134 12 47 191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 189 17 67 108 10 38 3 0 1 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 ++40 4 14 124 11 43 177 16 62 188 17 66 187 17 66 144 13 50 ++24 2 8 17 2 6 22 2 8 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 19 2 7 122 11 43 171 15 60 175 16 62 ++159 14 56 112 10 39 40 4 14 2 0 1 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 72 7 25 ++186 17 65 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 189 17 66 174 16 61 41 4 14 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 3 0 1 72 7 25 ++168 15 59 191 17 67 189 17 66 188 17 66 188 17 66 190 17 67 ++95 9 33 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 95 9 33 191 17 67 189 17 66 189 17 66 ++190 17 67 191 17 67 171 15 60 90 8 32 12 1 4 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 132 12 46 ++191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 190 17 67 98 9 34 0 0 0 ++0 0 0 0 0 0 0 0 0 5 0 2 88 8 31 180 16 63 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 191 17 67 ++146 13 51 11 1 4 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 9 1 3 144 13 50 191 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 189 17 66 187 17 66 123 11 43 20 2 7 ++0 0 0 0 0 0 0 0 0 0 0 0 21 2 7 163 15 57 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 191 17 67 134 12 47 5 0 2 ++0 0 0 0 0 0 3 0 1 88 8 31 182 16 64 189 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 ++171 15 60 31 3 11 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 20 2 7 162 15 57 190 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 132 12 46 ++20 2 7 0 0 0 0 0 0 0 0 0 32 3 11 173 16 61 ++189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 190 17 67 151 14 53 12 1 4 ++0 0 0 0 0 0 72 7 25 180 16 63 189 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++181 16 63 47 4 16 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 21 2 7 163 15 57 190 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 ++122 11 43 9 1 3 0 0 0 0 0 0 30 3 10 171 15 60 ++189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 190 17 67 146 13 51 10 1 4 ++0 0 0 38 3 13 166 15 58 190 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++183 17 64 52 5 18 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 13 1 5 154 14 54 190 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++186 17 65 79 7 28 0 0 0 0 0 0 14 1 5 156 14 54 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 191 17 67 124 11 43 2 0 1 ++5 0 2 122 11 43 191 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++182 16 64 47 4 16 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 3 0 1 126 14 44 191 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++190 17 67 158 14 55 23 2 8 0 0 0 1 0 0 113 10 40 ++191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 78 7 27 0 0 0 ++47 4 16 177 16 62 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 189 17 66 ++173 16 61 34 3 12 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 85 8 30 189 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 79 7 28 0 0 0 0 0 0 47 4 16 ++175 16 62 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 190 17 67 156 14 55 22 2 8 0 0 0 ++109 10 38 191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 ++151 14 53 13 1 5 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 35 3 12 173 16 61 189 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 191 17 67 134 12 47 7 1 2 0 0 0 3 0 1 ++99 9 35 188 17 66 189 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 181 16 63 68 6 24 0 0 0 18 2 6 ++156 14 55 190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 ++101 9 35 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 3 0 1 118 13 41 191 17 67 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 168 15 59 28 3 10 0 0 0 0 0 0 ++12 1 4 113 10 40 187 17 66 189 17 67 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++190 17 67 180 16 63 88 8 31 4 0 1 0 0 0 47 4 16 ++180 16 63 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 190 17 67 168 15 59 ++36 3 13 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 38 3 13 164 15 58 190 17 67 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 182 16 64 50 5 17 0 0 0 0 0 0 ++0 0 0 11 1 4 90 8 32 169 15 59 190 17 67 190 17 67 ++189 17 66 189 17 66 189 17 66 189 17 66 191 17 67 189 17 66 ++158 14 55 68 6 24 4 0 1 0 0 0 0 0 0 73 7 26 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 189 17 66 185 17 65 83 8 29 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 65 6 23 174 16 61 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 185 17 65 56 5 19 0 0 0 0 0 0 ++0 0 0 0 0 0 2 0 1 35 3 12 99 9 35 146 13 51 ++170 15 60 177 16 62 177 16 62 166 15 58 141 13 49 85 8 30 ++24 2 8 0 0 0 0 0 0 0 0 0 0 0 0 85 8 30 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 189 17 66 112 10 39 8 1 3 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 68 6 24 ++170 15 60 191 17 67 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 182 16 64 50 5 17 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 11 1 4 ++28 3 10 40 4 14 38 3 13 25 2 9 8 1 3 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 78 7 27 ++189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 187 17 66 113 10 40 14 1 5 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 ++47 4 16 141 13 49 186 17 65 191 17 67 190 17 67 189 17 66 ++189 17 66 191 17 67 156 14 55 20 2 7 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 44 4 15 ++178 16 62 190 17 67 188 17 66 188 17 66 188 17 66 190 17 67 ++191 17 67 173 16 61 90 8 32 10 1 4 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 14 1 5 68 6 24 131 12 46 162 15 57 174 16 61 ++171 15 60 146 13 51 56 5 19 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 3 0 1 14 1 5 29 3 10 ++41 4 14 47 4 16 50 5 17 45 4 16 34 3 12 18 2 6 ++5 0 2 0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 ++90 8 32 169 15 59 185 17 65 187 17 66 182 16 64 163 15 57 ++113 10 40 41 4 14 2 0 1 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 5 0 2 21 2 7 34 3 12 ++29 3 10 11 1 4 0 0 0 0 0 0 0 0 0 0 0 0 ++3 0 1 32 3 11 79 7 28 124 11 43 154 14 54 171 15 60 ++180 16 63 182 16 64 182 16 64 180 16 63 174 16 61 159 14 56 ++132 12 46 88 8 31 34 3 12 3 0 1 0 0 0 0 0 0 ++3 0 1 29 3 10 56 5 19 65 6 23 50 5 17 23 2 8 ++3 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 25 2 9 ++109 10 38 169 15 59 189 17 66 191 17 67 190 17 67 189 17 66 ++189 17 66 188 17 66 188 17 66 188 17 66 189 17 66 190 17 67 ++191 17 67 190 17 67 171 15 60 98 9 34 10 1 3 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 14 1 5 141 13 49 ++191 17 67 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 189 17 67 186 17 65 65 6 23 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 23 2 8 166 15 58 ++190 17 67 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 189 17 66 176 16 62 45 4 16 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 83 8 29 ++183 17 64 189 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++188 17 66 189 17 66 185 17 65 95 9 33 3 0 1 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 ++85 8 30 176 16 62 191 17 67 188 17 66 188 17 66 188 17 66 ++188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 188 17 66 ++191 17 67 180 16 63 95 9 33 7 1 3 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++2 0 1 52 5 18 141 13 49 185 17 65 191 17 67 189 17 67 ++189 17 66 188 17 66 188 17 66 189 17 66 191 17 67 187 17 66 ++146 13 51 56 5 19 4 0 1 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 14 1 5 68 6 24 131 12 46 166 15 58 ++180 16 63 183 17 64 180 16 63 168 15 59 134 12 47 75 7 26 ++17 2 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 5 0 2 24 2 8 ++44 4 15 52 5 18 45 4 16 26 2 9 6 1 2 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ++0 0 0 0 0 0 0 0 0 diff --git a/target/linux/brcm2708/patches-4.9/950-0033-dmaengine-Add-support-for-BCM2708.patch b/target/linux/brcm2708/patches-4.9/950-0033-dmaengine-Add-support-for-BCM2708.patch new file mode 100644 index 000000000000..a2f45519b669 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0033-dmaengine-Add-support-for-BCM2708.patch @@ -0,0 +1,623 @@ +From 33444cee555204ee605e6ec9050b04e874fb0090 Mon Sep 17 00:00:00 2001 +From: Florian Meier +Date: Fri, 22 Nov 2013 14:22:53 +0100 +Subject: [PATCH] dmaengine: Add support for BCM2708 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add support for DMA controller of BCM2708 as used in the Raspberry Pi. +Currently it only supports cyclic DMA. + +Signed-off-by: Florian Meier + +dmaengine: expand functionality by supporting scatter/gather transfers sdhci-bcm2708 and dma.c: fix for LITE channels + +DMA: fix cyclic LITE length overflow bug + +dmaengine: bcm2708: Remove chancnt affectations + +Mirror bcm2835-dma.c commit 9eba5536a7434c69d8c185d4bd1c70734d92287d: +chancnt is already filled by dma_async_device_register, which uses the channel +list to know how much channels there is. + +Since it's already filled, we can safely remove it from the drivers' probe +function. + +Signed-off-by: Noralf Trønnes + +dmaengine: bcm2708: overwrite dreq only if it is not set + +dreq is set when the DMA channel is fetched from Device Tree. +slave_id is set using dmaengine_slave_config(). +Only overwrite dreq with slave_id if it is not set. + +dreq/slave_id in the cyclic DMA case is not touched, because I don't +have hardware to test with. + +Signed-off-by: Noralf Trønnes + +dmaengine: bcm2708: do device registration in the board file + +Don't register the device in the driver. Do it in the board file. + +Signed-off-by: Noralf Trønnes + +dmaengine: bcm2708: don't restrict DT support to ARCH_BCM2835 + +Both ARCH_BCM2835 and ARCH_BCM270x are built with OF now. +Add Device Tree support to the non ARCH_BCM2835 case. +Use the same driver name regardless of architecture. + +Signed-off-by: Noralf Trønnes + +BCM270x_DT: add bcm2835-dma entry + +Add Device Tree entry for bcm2835-dma. +The entry doesn't contain any resources since they are handled +by the arch/arm/mach-bcm270x/dma.c driver. +In non-DT mode, don't add the device in the board file. + +Signed-off-by: Noralf Trønnes + +bcm2708-dmaengine: Add debug options + +BCM270x: Add memory and irq resources to dmaengine device and DT + +Prepare for merging of the legacy DMA API arch driver dma.c +with bcm2708-dmaengine by adding memory and irq resources both +to platform file device and Device Tree node. +Don't use BCM_DMAMAN_DRIVER_NAME so we don't have to include mach/dma.h + +Signed-off-by: Noralf Trønnes + +dmaengine: bcm2708: Merge with arch dma.c driver and disable dma.c + +Merge the legacy DMA API driver with bcm2708-dmaengine. +This is done so we can use bcm2708_fb on ARCH_BCM2835 (mailbox +driver is also needed). + +Changes to the dma.c code: +- Use BIT() macro. +- Cutdown some comments to one line. +- Add mutex to vc_dmaman and use this, since the dev lock is locked + during probing of the engine part. +- Add global g_dmaman variable since drvdata is used by the engine part. +- Restructure for readability: + vc_dmaman_chan_alloc() + vc_dmaman_chan_free() + bcm_dma_chan_free() +- Restructure bcm_dma_chan_alloc() to simplify error handling. +- Use device irq resources instead of hardcoded bcm_dma_irqs table. +- Remove dev_dmaman_register() and code it directly. +- Remove dev_dmaman_deregister() and code it directly. +- Simplify bcm_dmaman_probe() using devm_* functions. +- Get dmachans from DT if available. +- Keep 'dma.dmachans' module argument name for backwards compatibility. + +Make it available on ARCH_BCM2835 as well. + +Signed-off-by: Noralf Trønnes + +dmaengine: bcm2708: set residue_granularity field + +bcm2708-dmaengine supports residue reporting at burst level +but didn't report this via the residue_granularity field. + +Without this field set properly we get playback issues with I2S cards. + +dmaengine: bcm2708-dmaengine: Fix memory leak when stopping a running transfer + +bcm2708-dmaengine: Use more DMA channels (but not 12) + +1) Only the bcm2708_fb drivers uses the legacy DMA API, and +it requires a BULK-capable channel, so all other types +(FAST, NORMAL and LITE) can be made available to the regular +DMA API. + +2) DMA channels 11-14 share an interrupt. The driver can't +handle this, so don't use channels 12-14 (12 was used, probably +because it appears to have an interrupt, but in reality that +interrupt is for activity on ANY channel). This may explain +a lockup encountered when running out of DMA channels. + +The combined effect of this patch is to leave 7 DMA channels +available + channel 0 for bcm2708_fb via the legacy API. + +See: https://github.com/raspberrypi/linux/issues/1110 + https://github.com/raspberrypi/linux/issues/1108 + +dmaengine: bcm2708: Make legacy API available for bcm2835-dma + +bcm2708_fb uses the legacy DMA API, so in order to start using +bcm2835-dma, bcm2835-dma has to support the legacy API. Make this +possible by exporting bcm_dmaman_probe() and bcm_dmaman_remove(). + +Signed-off-by: Noralf Trønnes + +dmaengine: bcm2708: Change DT compatible string + +Both bcm2835-dma and bcm2708-dmaengine have the same compatible string. +So change compatible to "brcm,bcm2708-dma". + +Signed-off-by: Noralf Trønnes + +dmaengine: bcm2708: Remove driver but keep legacy API + +Dropping non-DT support means we don't need this driver, +but we still need the legacy DMA API. + +Signed-off-by: Noralf Trønnes + +bcm2708-dmaengine - Fix arm64 portability/build issues +--- + drivers/dma/Kconfig | 6 +- + drivers/dma/Makefile | 1 + + drivers/dma/bcm2708-dmaengine.c | 281 ++++++++++++++++++++++++++++++ + include/linux/platform_data/dma-bcm2708.h | 143 +++++++++++++++ + 4 files changed, 430 insertions(+), 1 deletion(-) + create mode 100644 drivers/dma/bcm2708-dmaengine.c + create mode 100644 include/linux/platform_data/dma-bcm2708.h + +--- a/drivers/dma/Kconfig ++++ b/drivers/dma/Kconfig +@@ -108,7 +108,7 @@ config COH901318 + + config DMA_BCM2835 + tristate "BCM2835 DMA engine support" +- depends on ARCH_BCM2835 || ARCH_BCM2708 || ARCH_BCM2709 ++ depends on ARCH_BCM2835 + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + +@@ -499,6 +499,10 @@ config TIMB_DMA + help + Enable support for the Timberdale FPGA DMA engine. + ++config DMA_BCM2708 ++ tristate "BCM2708 DMA legacy API support" ++ depends on DMA_BCM2835 ++ + config TI_CPPI41 + tristate "AM33xx CPPI41 DMA support" + depends on ARCH_OMAP +--- a/drivers/dma/Makefile ++++ b/drivers/dma/Makefile +@@ -18,6 +18,7 @@ obj-$(CONFIG_AT_HDMAC) += at_hdmac.o + obj-$(CONFIG_AT_XDMAC) += at_xdmac.o + obj-$(CONFIG_AXI_DMAC) += dma-axi-dmac.o + obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o ++obj-$(CONFIG_DMA_BCM2708) += bcm2708-dmaengine.o + obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o + obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o + obj-$(CONFIG_DMA_JZ4780) += dma-jz4780.o +--- /dev/null ++++ b/drivers/dma/bcm2708-dmaengine.c +@@ -0,0 +1,281 @@ ++/* ++ * BCM2708 legacy DMA API ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "virt-dma.h" ++ ++#define CACHE_LINE_MASK 31 ++#define DEFAULT_DMACHAN_BITMAP 0x10 /* channel 4 only */ ++ ++/* valid only for channels 0 - 14, 15 has its own base address */ ++#define BCM2708_DMA_CHAN(n) ((n) << 8) /* base address */ ++#define BCM2708_DMA_CHANIO(dma_base, n) \ ++ ((void __iomem *)((char *)(dma_base) + BCM2708_DMA_CHAN(n))) ++ ++struct vc_dmaman { ++ void __iomem *dma_base; ++ u32 chan_available; /* bitmap of available channels */ ++ u32 has_feature[BCM_DMA_FEATURE_COUNT]; /* bitmap of feature presence */ ++ struct mutex lock; ++}; ++ ++static struct device *dmaman_dev; /* we assume there's only one! */ ++static struct vc_dmaman *g_dmaman; /* DMA manager */ ++ ++/* DMA Auxiliary Functions */ ++ ++/* A DMA buffer on an arbitrary boundary may separate a cache line into a ++ section inside the DMA buffer and another section outside it. ++ Even if we flush DMA buffers from the cache there is always the chance that ++ during a DMA someone will access the part of a cache line that is outside ++ the DMA buffer - which will then bring in unwelcome data. ++ Without being able to dictate our own buffer pools we must insist that ++ DMA buffers consist of a whole number of cache lines. ++*/ ++extern int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len) ++{ ++ int i; ++ ++ for (i = 0; i < sg_len; i++) { ++ if (sg_ptr[i].offset & CACHE_LINE_MASK || ++ sg_ptr[i].length & CACHE_LINE_MASK) ++ return 0; ++ } ++ ++ return 1; ++} ++EXPORT_SYMBOL_GPL(bcm_sg_suitable_for_dma); ++ ++extern void bcm_dma_start(void __iomem *dma_chan_base, ++ dma_addr_t control_block) ++{ ++ dsb(sy); /* ARM data synchronization (push) operation */ ++ ++ writel(control_block, dma_chan_base + BCM2708_DMA_ADDR); ++ writel(BCM2708_DMA_ACTIVE, dma_chan_base + BCM2708_DMA_CS); ++} ++EXPORT_SYMBOL_GPL(bcm_dma_start); ++ ++extern void bcm_dma_wait_idle(void __iomem *dma_chan_base) ++{ ++ dsb(sy); ++ ++ /* ugly busy wait only option for now */ ++ while (readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_ACTIVE) ++ cpu_relax(); ++} ++EXPORT_SYMBOL_GPL(bcm_dma_wait_idle); ++ ++extern bool bcm_dma_is_busy(void __iomem *dma_chan_base) ++{ ++ dsb(sy); ++ ++ return readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_ACTIVE; ++} ++EXPORT_SYMBOL_GPL(bcm_dma_is_busy); ++ ++/* Complete an ongoing DMA (assuming its results are to be ignored) ++ Does nothing if there is no DMA in progress. ++ This routine waits for the current AXI transfer to complete before ++ terminating the current DMA. If the current transfer is hung on a DREQ used ++ by an uncooperative peripheral the AXI transfer may never complete. In this ++ case the routine times out and return a non-zero error code. ++ Use of this routine doesn't guarantee that the ongoing or aborted DMA ++ does not produce an interrupt. ++*/ ++extern int bcm_dma_abort(void __iomem *dma_chan_base) ++{ ++ unsigned long int cs; ++ int rc = 0; ++ ++ cs = readl(dma_chan_base + BCM2708_DMA_CS); ++ ++ if (BCM2708_DMA_ACTIVE & cs) { ++ long int timeout = 10000; ++ ++ /* write 0 to the active bit - pause the DMA */ ++ writel(0, dma_chan_base + BCM2708_DMA_CS); ++ ++ /* wait for any current AXI transfer to complete */ ++ while (0 != (cs & BCM2708_DMA_ISPAUSED) && --timeout >= 0) ++ cs = readl(dma_chan_base + BCM2708_DMA_CS); ++ ++ if (0 != (cs & BCM2708_DMA_ISPAUSED)) { ++ /* we'll un-pause when we set of our next DMA */ ++ rc = -ETIMEDOUT; ++ ++ } else if (BCM2708_DMA_ACTIVE & cs) { ++ /* terminate the control block chain */ ++ writel(0, dma_chan_base + BCM2708_DMA_NEXTCB); ++ ++ /* abort the whole DMA */ ++ writel(BCM2708_DMA_ABORT | BCM2708_DMA_ACTIVE, ++ dma_chan_base + BCM2708_DMA_CS); ++ } ++ } ++ ++ return rc; ++} ++EXPORT_SYMBOL_GPL(bcm_dma_abort); ++ ++ /* DMA Manager Device Methods */ ++ ++static void vc_dmaman_init(struct vc_dmaman *dmaman, void __iomem *dma_base, ++ u32 chans_available) ++{ ++ dmaman->dma_base = dma_base; ++ dmaman->chan_available = chans_available; ++ dmaman->has_feature[BCM_DMA_FEATURE_FAST_ORD] = 0x0c; /* 2 & 3 */ ++ dmaman->has_feature[BCM_DMA_FEATURE_BULK_ORD] = 0x01; /* 0 */ ++ dmaman->has_feature[BCM_DMA_FEATURE_NORMAL_ORD] = 0xfe; /* 1 to 7 */ ++ dmaman->has_feature[BCM_DMA_FEATURE_LITE_ORD] = 0x7f00; /* 8 to 14 */ ++} ++ ++static int vc_dmaman_chan_alloc(struct vc_dmaman *dmaman, ++ unsigned required_feature_set) ++{ ++ u32 chans; ++ int chan = 0; ++ int feature; ++ ++ chans = dmaman->chan_available; ++ for (feature = 0; feature < BCM_DMA_FEATURE_COUNT; feature++) ++ /* select the subset of available channels with the desired ++ features */ ++ if (required_feature_set & (1 << feature)) ++ chans &= dmaman->has_feature[feature]; ++ ++ if (!chans) ++ return -ENOENT; ++ ++ /* return the ordinal of the first channel in the bitmap */ ++ while (chans != 0 && (chans & 1) == 0) { ++ chans >>= 1; ++ chan++; ++ } ++ /* claim the channel */ ++ dmaman->chan_available &= ~(1 << chan); ++ ++ return chan; ++} ++ ++static int vc_dmaman_chan_free(struct vc_dmaman *dmaman, int chan) ++{ ++ if (chan < 0) ++ return -EINVAL; ++ ++ if ((1 << chan) & dmaman->chan_available) ++ return -EIDRM; ++ ++ dmaman->chan_available |= (1 << chan); ++ ++ return 0; ++} ++ ++/* DMA Manager Monitor */ ++ ++extern int bcm_dma_chan_alloc(unsigned required_feature_set, ++ void __iomem **out_dma_base, int *out_dma_irq) ++{ ++ struct vc_dmaman *dmaman = g_dmaman; ++ struct platform_device *pdev = to_platform_device(dmaman_dev); ++ struct resource *r; ++ int chan; ++ ++ if (!dmaman_dev) ++ return -ENODEV; ++ ++ mutex_lock(&dmaman->lock); ++ chan = vc_dmaman_chan_alloc(dmaman, required_feature_set); ++ if (chan < 0) ++ goto out; ++ ++ r = platform_get_resource(pdev, IORESOURCE_IRQ, (unsigned int)chan); ++ if (!r) { ++ dev_err(dmaman_dev, "failed to get irq for DMA channel %d\n", ++ chan); ++ vc_dmaman_chan_free(dmaman, chan); ++ chan = -ENOENT; ++ goto out; ++ } ++ ++ *out_dma_base = BCM2708_DMA_CHANIO(dmaman->dma_base, chan); ++ *out_dma_irq = r->start; ++ dev_dbg(dmaman_dev, ++ "Legacy API allocated channel=%d, base=%p, irq=%i\n", ++ chan, *out_dma_base, *out_dma_irq); ++ ++out: ++ mutex_unlock(&dmaman->lock); ++ ++ return chan; ++} ++EXPORT_SYMBOL_GPL(bcm_dma_chan_alloc); ++ ++extern int bcm_dma_chan_free(int channel) ++{ ++ struct vc_dmaman *dmaman = g_dmaman; ++ int rc; ++ ++ if (!dmaman_dev) ++ return -ENODEV; ++ ++ mutex_lock(&dmaman->lock); ++ rc = vc_dmaman_chan_free(dmaman, channel); ++ mutex_unlock(&dmaman->lock); ++ ++ return rc; ++} ++EXPORT_SYMBOL_GPL(bcm_dma_chan_free); ++ ++int bcm_dmaman_probe(struct platform_device *pdev, void __iomem *base, ++ u32 chans_available) ++{ ++ struct device *dev = &pdev->dev; ++ struct vc_dmaman *dmaman; ++ ++ dmaman = devm_kzalloc(dev, sizeof(*dmaman), GFP_KERNEL); ++ if (!dmaman) ++ return -ENOMEM; ++ ++ mutex_init(&dmaman->lock); ++ vc_dmaman_init(dmaman, base, chans_available); ++ g_dmaman = dmaman; ++ dmaman_dev = dev; ++ ++ dev_info(dev, "DMA legacy API manager at %p, dmachans=0x%x\n", ++ base, chans_available); ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcm_dmaman_probe); ++ ++int bcm_dmaman_remove(struct platform_device *pdev) ++{ ++ dmaman_dev = NULL; ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcm_dmaman_remove); ++ ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/include/linux/platform_data/dma-bcm2708.h +@@ -0,0 +1,143 @@ ++/* ++ * Copyright (C) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef _PLAT_BCM2708_DMA_H ++#define _PLAT_BCM2708_DMA_H ++ ++/* DMA CS Control and Status bits */ ++#define BCM2708_DMA_ACTIVE BIT(0) ++#define BCM2708_DMA_INT BIT(2) ++#define BCM2708_DMA_ISPAUSED BIT(4) /* Pause requested or not active */ ++#define BCM2708_DMA_ISHELD BIT(5) /* Is held by DREQ flow control */ ++#define BCM2708_DMA_ERR BIT(8) ++#define BCM2708_DMA_ABORT BIT(30) /* stop current CB, go to next, WO */ ++#define BCM2708_DMA_RESET BIT(31) /* WO, self clearing */ ++ ++/* DMA control block "info" field bits */ ++#define BCM2708_DMA_INT_EN BIT(0) ++#define BCM2708_DMA_TDMODE BIT(1) ++#define BCM2708_DMA_WAIT_RESP BIT(3) ++#define BCM2708_DMA_D_INC BIT(4) ++#define BCM2708_DMA_D_WIDTH BIT(5) ++#define BCM2708_DMA_D_DREQ BIT(6) ++#define BCM2708_DMA_S_INC BIT(8) ++#define BCM2708_DMA_S_WIDTH BIT(9) ++#define BCM2708_DMA_S_DREQ BIT(10) ++ ++#define BCM2708_DMA_BURST(x) (((x) & 0xf) << 12) ++#define BCM2708_DMA_PER_MAP(x) ((x) << 16) ++#define BCM2708_DMA_WAITS(x) (((x) & 0x1f) << 21) ++ ++#define BCM2708_DMA_DREQ_EMMC 11 ++#define BCM2708_DMA_DREQ_SDHOST 13 ++ ++#define BCM2708_DMA_CS 0x00 /* Control and Status */ ++#define BCM2708_DMA_ADDR 0x04 ++/* the current control block appears in the following registers - read only */ ++#define BCM2708_DMA_INFO 0x08 ++#define BCM2708_DMA_SOURCE_AD 0x0c ++#define BCM2708_DMA_DEST_AD 0x10 ++#define BCM2708_DMA_NEXTCB 0x1C ++#define BCM2708_DMA_DEBUG 0x20 ++ ++#define BCM2708_DMA4_CS (BCM2708_DMA_CHAN(4) + BCM2708_DMA_CS) ++#define BCM2708_DMA4_ADDR (BCM2708_DMA_CHAN(4) + BCM2708_DMA_ADDR) ++ ++#define BCM2708_DMA_TDMODE_LEN(w, h) ((h) << 16 | (w)) ++ ++/* When listing features we can ask for when allocating DMA channels give ++ those with higher priority smaller ordinal numbers */ ++#define BCM_DMA_FEATURE_FAST_ORD 0 ++#define BCM_DMA_FEATURE_BULK_ORD 1 ++#define BCM_DMA_FEATURE_NORMAL_ORD 2 ++#define BCM_DMA_FEATURE_LITE_ORD 3 ++#define BCM_DMA_FEATURE_FAST BIT(BCM_DMA_FEATURE_FAST_ORD) ++#define BCM_DMA_FEATURE_BULK BIT(BCM_DMA_FEATURE_BULK_ORD) ++#define BCM_DMA_FEATURE_NORMAL BIT(BCM_DMA_FEATURE_NORMAL_ORD) ++#define BCM_DMA_FEATURE_LITE BIT(BCM_DMA_FEATURE_LITE_ORD) ++#define BCM_DMA_FEATURE_COUNT 4 ++ ++struct bcm2708_dma_cb { ++ u32 info; ++ u32 src; ++ u32 dst; ++ u32 length; ++ u32 stride; ++ u32 next; ++ u32 pad[2]; ++}; ++ ++struct scatterlist; ++struct platform_device; ++ ++#ifdef CONFIG_DMA_BCM2708 ++ ++int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len); ++void bcm_dma_start(void __iomem *dma_chan_base, dma_addr_t control_block); ++void bcm_dma_wait_idle(void __iomem *dma_chan_base); ++bool bcm_dma_is_busy(void __iomem *dma_chan_base); ++int bcm_dma_abort(void __iomem *dma_chan_base); ++ ++/* return channel no or -ve error */ ++int bcm_dma_chan_alloc(unsigned preferred_feature_set, ++ void __iomem **out_dma_base, int *out_dma_irq); ++int bcm_dma_chan_free(int channel); ++ ++int bcm_dmaman_probe(struct platform_device *pdev, void __iomem *base, ++ u32 chans_available); ++int bcm_dmaman_remove(struct platform_device *pdev); ++ ++#else /* CONFIG_DMA_BCM2708 */ ++ ++static inline int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, ++ int sg_len) ++{ ++ return 0; ++} ++ ++static inline void bcm_dma_start(void __iomem *dma_chan_base, ++ dma_addr_t control_block) { } ++ ++static inline void bcm_dma_wait_idle(void __iomem *dma_chan_base) { } ++ ++static inline bool bcm_dma_is_busy(void __iomem *dma_chan_base) ++{ ++ return false; ++} ++ ++static inline int bcm_dma_abort(void __iomem *dma_chan_base) ++{ ++ return -EINVAL; ++} ++ ++static inline int bcm_dma_chan_alloc(unsigned preferred_feature_set, ++ void __iomem **out_dma_base, ++ int *out_dma_irq) ++{ ++ return -EINVAL; ++} ++ ++static inline int bcm_dma_chan_free(int channel) ++{ ++ return -EINVAL; ++} ++ ++static inline int bcm_dmaman_probe(struct platform_device *pdev, ++ void __iomem *base, u32 chans_available) ++{ ++ return 0; ++} ++ ++static inline int bcm_dmaman_remove(struct platform_device *pdev) ++{ ++ return 0; ++} ++ ++#endif /* CONFIG_DMA_BCM2708 */ ++ ++#endif /* _PLAT_BCM2708_DMA_H */ diff --git a/target/linux/brcm2708/patches-4.9/950-0034-MMC-added-alternative-MMC-driver.patch b/target/linux/brcm2708/patches-4.9/950-0034-MMC-added-alternative-MMC-driver.patch new file mode 100644 index 000000000000..70fb8f3d8c12 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0034-MMC-added-alternative-MMC-driver.patch @@ -0,0 +1,1743 @@ +From 1620619c5fa6acae1e119d6461b5c9a2a9416e69 Mon Sep 17 00:00:00 2001 +From: gellert +Date: Fri, 15 Aug 2014 16:35:06 +0100 +Subject: [PATCH] MMC: added alternative MMC driver +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +mmc: Disable CMD23 transfers on all cards + +Pending wire-level investigation of these types of transfers +and associated errors on bcm2835-mmc, disable for now. Fallback of +CMD18/CMD25 transfers will be used automatically by the MMC layer. + +Reported/Tested-by: Gellert Weisz + +mmc: bcm2835-mmc: enable DT support for all architectures + +Both ARCH_BCM2835 and ARCH_BCM270x are built with OF now. +Enable Device Tree support for all architectures. + +Signed-off-by: Noralf Trønnes + +mmc: bcm2835-mmc: fix probe error handling + +Probe error handling is broken in several places. +Simplify error handling by using device managed functions. +Replace pr_{err,info} with dev_{err,info}. + +Signed-off-by: Noralf Trønnes + +bcm2835-mmc: Add locks when accessing sdhost registers + +bcm2835-mmc: Add range of debug options for slowing things down + +bcm2835-mmc: Add option to disable some delays + +bcm2835-mmc: Add option to disable MMC_QUIRK_BLK_NO_CMD23 + +bcm2835-mmc: Default to disabling MMC_QUIRK_BLK_NO_CMD23 + +bcm2835-mmc: Adding overclocking option + +Allow a different clock speed to be substitued for a requested 50MHz. +This option is exposed using the "overclock_50" DT parameter. +Note that the mmc interface is restricted to EVEN integer divisions of +250MHz, and the highest sensible option is 63 (250/4 = 62.5), the +next being 125 (250/2) which is much too high. + +Use at your own risk. + +bcm2835-mmc: Round up the overclock, so 62 works for 62.5Mhz + +Also only warn once for each overclock setting. + +mmc: bcm2835-mmc: Make available on ARCH_BCM2835 + +Make the bcm2835-mmc driver available for use on ARCH_BCM2835. + +Signed-off-by: Noralf Trønnes + +BCM270x_DT: add bcm2835-mmc entry + +Add Device Tree entry for bcm2835-mmc. +In non-DT mode, don't add the device in the board file. + +Signed-off-by: Noralf Trønnes + +bcm2835-mmc: Don't overwrite MMC capabilities from DT + +bcm2835-mmc: Don't override bus width capabilities from devicetree + +Take out the force setting of the MMC_CAP_4_BIT_DATA host capability +so that the result read from devicetree via mmc_of_parse() is +preserved. + +bcm2835-mmc: Only claim one DMA channel + +With both MMC controllers enabled there are few DMA channels left. The +bcm2835-mmc driver only uses DMA in one direction at a time, so it +doesn't need to claim two channels. + +See: https://github.com/raspberrypi/linux/issues/1327 + +Signed-off-by: Phil Elwell +--- + drivers/mmc/core/quirks.c | 10 + + drivers/mmc/host/Kconfig | 29 + + drivers/mmc/host/Makefile | 1 + + drivers/mmc/host/bcm2835-mmc.c | 1574 ++++++++++++++++++++++++++++++++++++++++ + 4 files changed, 1614 insertions(+) + create mode 100644 drivers/mmc/host/bcm2835-mmc.c + +--- a/drivers/mmc/core/quirks.c ++++ b/drivers/mmc/core/quirks.c +@@ -53,6 +53,9 @@ static const struct mmc_fixup mmc_fixup_ + + void mmc_fixup_device(struct mmc_card *card, const struct mmc_fixup *table) + { ++#ifdef CONFIG_MMC_BCM2835 ++ extern unsigned mmc_debug; ++#endif + const struct mmc_fixup *f; + u64 rev = cid_rev_card(card); + +@@ -79,5 +82,12 @@ void mmc_fixup_device(struct mmc_card *c + f->vendor_fixup(card, f->data); + } + } ++ /* SDHCI on BCM2708 - bug causes a certain sequence of CMD23 operations to fail. ++ * Disable this flag for all cards (fall-back to CMD25/CMD18 multi-block transfers). ++ */ ++#ifdef CONFIG_MMC_BCM2835 ++ if (mmc_debug & (1<<13)) ++ card->quirks |= MMC_QUIRK_BLK_NO_CMD23; ++#endif + } + EXPORT_SYMBOL(mmc_fixup_device); +--- a/drivers/mmc/host/Kconfig ++++ b/drivers/mmc/host/Kconfig +@@ -4,6 +4,35 @@ + + comment "MMC/SD/SDIO Host Controller Drivers" + ++config MMC_BCM2835 ++ tristate "MMC support on BCM2835" ++ depends on MACH_BCM2708 || MACH_BCM2709 || ARCH_BCM2835 ++ help ++ This selects the MMC Interface on BCM2835. ++ ++ If you have a controller with this interface, say Y or M here. ++ ++ If unsure, say N. ++ ++config MMC_BCM2835_DMA ++ bool "DMA support on BCM2835 Arasan controller" ++ depends on MMC_BCM2835 ++ help ++ Enable DMA support on the Arasan SDHCI controller in Broadcom 2708 ++ based chips. ++ ++ If unsure, say N. ++ ++config MMC_BCM2835_PIO_DMA_BARRIER ++ int "Block count limit for PIO transfers" ++ depends on MMC_BCM2835 && MMC_BCM2835_DMA ++ range 0 256 ++ default 2 ++ help ++ The inclusive limit in bytes under which PIO will be used instead of DMA ++ ++ If unsure, say 2 here. ++ + config MMC_ARMMMCI + tristate "ARM AMBA Multimedia Card Interface support" + depends on ARM_AMBA +--- a/drivers/mmc/host/Makefile ++++ b/drivers/mmc/host/Makefile +@@ -18,6 +18,7 @@ obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c + obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o + obj-$(CONFIG_MMC_SDHCI_F_SDH30) += sdhci_f_sdh30.o + obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o ++obj-$(CONFIG_MMC_BCM2835) += bcm2835-mmc.o + obj-$(CONFIG_MMC_WBSD) += wbsd.o + obj-$(CONFIG_MMC_AU1X) += au1xmmc.o + obj-$(CONFIG_MMC_MTK) += mtk-sd.o +--- /dev/null ++++ b/drivers/mmc/host/bcm2835-mmc.c +@@ -0,0 +1,1574 @@ ++/* ++ * BCM2835 MMC host driver. ++ * ++ * Author: Gellert Weisz ++ * Copyright 2014 ++ * ++ * Based on ++ * sdhci-bcm2708.c by Broadcom ++ * sdhci-bcm2835.c by Stephen Warren and Oleksandr Tymoshenko ++ * sdhci.c and sdhci-pci.c by Pierre Ossman ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms and conditions of the GNU General Public License, ++ * version 2, as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program. If not, see . ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "sdhci.h" ++ ++ ++#define DRIVER_NAME "mmc-bcm2835" ++ ++#define DBG(f, x...) \ ++pr_debug(DRIVER_NAME " [%s()]: " f, __func__, ## x) ++ ++#ifndef CONFIG_MMC_BCM2835_DMA ++ #define FORCE_PIO ++#endif ++ ++ ++/* the inclusive limit in bytes under which PIO will be used instead of DMA */ ++#ifdef CONFIG_MMC_BCM2835_PIO_DMA_BARRIER ++#define PIO_DMA_BARRIER CONFIG_MMC_BCM2835_PIO_DMA_BARRIER ++#else ++#define PIO_DMA_BARRIER 00 ++#endif ++ ++#define MIN_FREQ 400000 ++#define TIMEOUT_VAL 0xE ++#define BCM2835_SDHCI_WRITE_DELAY(f) (((2 * 1000000) / f) + 1) ++ ++ ++unsigned mmc_debug; ++unsigned mmc_debug2; ++ ++struct bcm2835_host { ++ spinlock_t lock; ++ ++ void __iomem *ioaddr; ++ u32 bus_addr; ++ ++ struct mmc_host *mmc; ++ ++ u32 timeout; ++ ++ int clock; /* Current clock speed */ ++ u8 pwr; /* Current voltage */ ++ ++ unsigned int max_clk; /* Max possible freq */ ++ unsigned int timeout_clk; /* Timeout freq (KHz) */ ++ unsigned int clk_mul; /* Clock Muliplier value */ ++ ++ struct tasklet_struct finish_tasklet; /* Tasklet structures */ ++ ++ struct timer_list timer; /* Timer for timeouts */ ++ ++ struct sg_mapping_iter sg_miter; /* SG state for PIO */ ++ unsigned int blocks; /* remaining PIO blocks */ ++ ++ int irq; /* Device IRQ */ ++ ++ ++ u32 ier; /* cached registers */ ++ ++ struct mmc_request *mrq; /* Current request */ ++ struct mmc_command *cmd; /* Current command */ ++ struct mmc_data *data; /* Current data request */ ++ unsigned int data_early:1; /* Data finished before cmd */ ++ ++ wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */ ++ ++ u32 thread_isr; ++ ++ u32 shadow; ++ ++ /*DMA part*/ ++ struct dma_chan *dma_chan_rxtx; /* DMA channel for reads and writes */ ++ struct dma_slave_config dma_cfg_rx; ++ struct dma_slave_config dma_cfg_tx; ++ struct dma_async_tx_descriptor *tx_desc; /* descriptor */ ++ ++ bool have_dma; ++ bool use_dma; ++ /*end of DMA part*/ ++ ++ int max_delay; /* maximum length of time spent waiting */ ++ ++ int flags; /* Host attributes */ ++#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ ++#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ ++#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */ ++#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ ++#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ ++ ++ u32 overclock_50; /* frequency to use when 50MHz is requested (in MHz) */ ++ u32 max_overclock; /* Highest reported */ ++}; ++ ++ ++static inline void bcm2835_mmc_writel(struct bcm2835_host *host, u32 val, int reg, int from) ++{ ++ unsigned delay; ++ lockdep_assert_held_once(&host->lock); ++ writel(val, host->ioaddr + reg); ++ udelay(BCM2835_SDHCI_WRITE_DELAY(max(host->clock, MIN_FREQ))); ++ ++ delay = ((mmc_debug >> 16) & 0xf) << ((mmc_debug >> 20) & 0xf); ++ if (delay && !((1<lock); ++ writel(val, host->ioaddr + reg); ++ ++ delay = ((mmc_debug >> 24) & 0xf) << ((mmc_debug >> 28) & 0xf); ++ if (delay) ++ udelay(delay); ++} ++ ++static inline u32 bcm2835_mmc_readl(struct bcm2835_host *host, int reg) ++{ ++ lockdep_assert_held_once(&host->lock); ++ return readl(host->ioaddr + reg); ++} ++ ++static inline void bcm2835_mmc_writew(struct bcm2835_host *host, u16 val, int reg) ++{ ++ u32 oldval = (reg == SDHCI_COMMAND) ? host->shadow : ++ bcm2835_mmc_readl(host, reg & ~3); ++ u32 word_num = (reg >> 1) & 1; ++ u32 word_shift = word_num * 16; ++ u32 mask = 0xffff << word_shift; ++ u32 newval = (oldval & ~mask) | (val << word_shift); ++ ++ if (reg == SDHCI_TRANSFER_MODE) ++ host->shadow = newval; ++ else ++ bcm2835_mmc_writel(host, newval, reg & ~3, 0); ++ ++} ++ ++static inline void bcm2835_mmc_writeb(struct bcm2835_host *host, u8 val, int reg) ++{ ++ u32 oldval = bcm2835_mmc_readl(host, reg & ~3); ++ u32 byte_num = reg & 3; ++ u32 byte_shift = byte_num * 8; ++ u32 mask = 0xff << byte_shift; ++ u32 newval = (oldval & ~mask) | (val << byte_shift); ++ ++ bcm2835_mmc_writel(host, newval, reg & ~3, 1); ++} ++ ++ ++static inline u16 bcm2835_mmc_readw(struct bcm2835_host *host, int reg) ++{ ++ u32 val = bcm2835_mmc_readl(host, (reg & ~3)); ++ u32 word_num = (reg >> 1) & 1; ++ u32 word_shift = word_num * 16; ++ u32 word = (val >> word_shift) & 0xffff; ++ ++ return word; ++} ++ ++static inline u8 bcm2835_mmc_readb(struct bcm2835_host *host, int reg) ++{ ++ u32 val = bcm2835_mmc_readl(host, (reg & ~3)); ++ u32 byte_num = reg & 3; ++ u32 byte_shift = byte_num * 8; ++ u32 byte = (val >> byte_shift) & 0xff; ++ ++ return byte; ++} ++ ++static void bcm2835_mmc_unsignal_irqs(struct bcm2835_host *host, u32 clear) ++{ ++ u32 ier; ++ ++ ier = bcm2835_mmc_readl(host, SDHCI_SIGNAL_ENABLE); ++ ier &= ~clear; ++ /* change which requests generate IRQs - makes no difference to ++ the content of SDHCI_INT_STATUS, or the need to acknowledge IRQs */ ++ bcm2835_mmc_writel(host, ier, SDHCI_SIGNAL_ENABLE, 2); ++} ++ ++ ++static void bcm2835_mmc_dumpregs(struct bcm2835_host *host) ++{ ++ pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n", ++ mmc_hostname(host->mmc)); ++ ++ pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n", ++ bcm2835_mmc_readl(host, SDHCI_DMA_ADDRESS), ++ bcm2835_mmc_readw(host, SDHCI_HOST_VERSION)); ++ pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n", ++ bcm2835_mmc_readw(host, SDHCI_BLOCK_SIZE), ++ bcm2835_mmc_readw(host, SDHCI_BLOCK_COUNT)); ++ pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n", ++ bcm2835_mmc_readl(host, SDHCI_ARGUMENT), ++ bcm2835_mmc_readw(host, SDHCI_TRANSFER_MODE)); ++ pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n", ++ bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE), ++ bcm2835_mmc_readb(host, SDHCI_HOST_CONTROL)); ++ pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n", ++ bcm2835_mmc_readb(host, SDHCI_POWER_CONTROL), ++ bcm2835_mmc_readb(host, SDHCI_BLOCK_GAP_CONTROL)); ++ pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n", ++ bcm2835_mmc_readb(host, SDHCI_WAKE_UP_CONTROL), ++ bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL)); ++ pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n", ++ bcm2835_mmc_readb(host, SDHCI_TIMEOUT_CONTROL), ++ bcm2835_mmc_readl(host, SDHCI_INT_STATUS)); ++ pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n", ++ bcm2835_mmc_readl(host, SDHCI_INT_ENABLE), ++ bcm2835_mmc_readl(host, SDHCI_SIGNAL_ENABLE)); ++ pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n", ++ bcm2835_mmc_readw(host, SDHCI_ACMD12_ERR), ++ bcm2835_mmc_readw(host, SDHCI_SLOT_INT_STATUS)); ++ pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n", ++ bcm2835_mmc_readl(host, SDHCI_CAPABILITIES), ++ bcm2835_mmc_readl(host, SDHCI_CAPABILITIES_1)); ++ pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n", ++ bcm2835_mmc_readw(host, SDHCI_COMMAND), ++ bcm2835_mmc_readl(host, SDHCI_MAX_CURRENT)); ++ pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n", ++ bcm2835_mmc_readw(host, SDHCI_HOST_CONTROL2)); ++ ++ pr_debug(DRIVER_NAME ": ===========================================\n"); ++} ++ ++ ++static void bcm2835_mmc_reset(struct bcm2835_host *host, u8 mask) ++{ ++ unsigned long timeout; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ bcm2835_mmc_writeb(host, mask, SDHCI_SOFTWARE_RESET); ++ ++ if (mask & SDHCI_RESET_ALL) ++ host->clock = 0; ++ ++ /* Wait max 100 ms */ ++ timeout = 100; ++ ++ /* hw clears the bit when it's done */ ++ while (bcm2835_mmc_readb(host, SDHCI_SOFTWARE_RESET) & mask) { ++ if (timeout == 0) { ++ pr_err("%s: Reset 0x%x never completed.\n", ++ mmc_hostname(host->mmc), (int)mask); ++ bcm2835_mmc_dumpregs(host); ++ return; ++ } ++ timeout--; ++ spin_unlock_irqrestore(&host->lock, flags); ++ mdelay(1); ++ spin_lock_irqsave(&host->lock, flags); ++ } ++ ++ if (100-timeout > 10 && 100-timeout > host->max_delay) { ++ host->max_delay = 100-timeout; ++ pr_warning("Warning: MMC controller hung for %d ms\n", host->max_delay); ++ } ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); ++ ++static void bcm2835_mmc_init(struct bcm2835_host *host, int soft) ++{ ++ unsigned long flags; ++ if (soft) ++ bcm2835_mmc_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA); ++ else ++ bcm2835_mmc_reset(host, SDHCI_RESET_ALL); ++ ++ host->ier = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | ++ SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | ++ SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC | ++ SDHCI_INT_TIMEOUT | SDHCI_INT_DATA_END | ++ SDHCI_INT_RESPONSE; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE, 3); ++ bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE, 3); ++ spin_unlock_irqrestore(&host->lock, flags); ++ ++ if (soft) { ++ /* force clock reconfiguration */ ++ host->clock = 0; ++ bcm2835_mmc_set_ios(host->mmc, &host->mmc->ios); ++ } ++} ++ ++ ++ ++static void bcm2835_mmc_finish_data(struct bcm2835_host *host); ++ ++static void bcm2835_mmc_dma_complete(void *param) ++{ ++ struct bcm2835_host *host = param; ++ struct dma_chan *dma_chan; ++ unsigned long flags; ++ u32 dir_data; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ if (host->data && !(host->data->flags & MMC_DATA_WRITE)) { ++ /* otherwise handled in SDHCI IRQ */ ++ dma_chan = host->dma_chan_rxtx; ++ dir_data = DMA_FROM_DEVICE; ++ ++ dma_unmap_sg(dma_chan->device->dev, ++ host->data->sg, host->data->sg_len, ++ dir_data); ++ ++ bcm2835_mmc_finish_data(host); ++ } ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_bcm2835_mmc_read_block_pio(struct bcm2835_host *host) ++{ ++ unsigned long flags; ++ size_t blksize, len, chunk; ++ ++ u32 uninitialized_var(scratch); ++ u8 *buf; ++ ++ blksize = host->data->blksz; ++ chunk = 0; ++ ++ local_irq_save(flags); ++ ++ while (blksize) { ++ if (!sg_miter_next(&host->sg_miter)) ++ BUG(); ++ ++ len = min(host->sg_miter.length, blksize); ++ ++ blksize -= len; ++ host->sg_miter.consumed = len; ++ ++ buf = host->sg_miter.addr; ++ ++ while (len) { ++ if (chunk == 0) { ++ scratch = bcm2835_mmc_readl(host, SDHCI_BUFFER); ++ chunk = 4; ++ } ++ ++ *buf = scratch & 0xFF; ++ ++ buf++; ++ scratch >>= 8; ++ chunk--; ++ len--; ++ } ++ } ++ ++ sg_miter_stop(&host->sg_miter); ++ ++ local_irq_restore(flags); ++} ++ ++static void bcm2835_bcm2835_mmc_write_block_pio(struct bcm2835_host *host) ++{ ++ unsigned long flags; ++ size_t blksize, len, chunk; ++ u32 scratch; ++ u8 *buf; ++ ++ blksize = host->data->blksz; ++ chunk = 0; ++ chunk = 0; ++ scratch = 0; ++ ++ local_irq_save(flags); ++ ++ while (blksize) { ++ if (!sg_miter_next(&host->sg_miter)) ++ BUG(); ++ ++ len = min(host->sg_miter.length, blksize); ++ ++ blksize -= len; ++ host->sg_miter.consumed = len; ++ ++ buf = host->sg_miter.addr; ++ ++ while (len) { ++ scratch |= (u32)*buf << (chunk * 8); ++ ++ buf++; ++ chunk++; ++ len--; ++ ++ if ((chunk == 4) || ((len == 0) && (blksize == 0))) { ++ mmc_raw_writel(host, scratch, SDHCI_BUFFER); ++ chunk = 0; ++ scratch = 0; ++ } ++ } ++ } ++ ++ sg_miter_stop(&host->sg_miter); ++ ++ local_irq_restore(flags); ++} ++ ++ ++static void bcm2835_mmc_transfer_pio(struct bcm2835_host *host) ++{ ++ u32 mask; ++ ++ BUG_ON(!host->data); ++ ++ if (host->blocks == 0) ++ return; ++ ++ if (host->data->flags & MMC_DATA_READ) ++ mask = SDHCI_DATA_AVAILABLE; ++ else ++ mask = SDHCI_SPACE_AVAILABLE; ++ ++ while (bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE) & mask) { ++ ++ if (host->data->flags & MMC_DATA_READ) ++ bcm2835_bcm2835_mmc_read_block_pio(host); ++ else ++ bcm2835_bcm2835_mmc_write_block_pio(host); ++ ++ host->blocks--; ++ ++ /* QUIRK used in sdhci.c removes the 'if' */ ++ /* but it seems this is unnecessary */ ++ if (host->blocks == 0) ++ break; ++ ++ ++ } ++} ++ ++ ++static void bcm2835_mmc_transfer_dma(struct bcm2835_host *host) ++{ ++ u32 len, dir_data, dir_slave; ++ struct dma_async_tx_descriptor *desc = NULL; ++ struct dma_chan *dma_chan; ++ ++ ++ WARN_ON(!host->data); ++ ++ if (!host->data) ++ return; ++ ++ if (host->blocks == 0) ++ return; ++ ++ dma_chan = host->dma_chan_rxtx; ++ if (host->data->flags & MMC_DATA_READ) { ++ dir_data = DMA_FROM_DEVICE; ++ dir_slave = DMA_DEV_TO_MEM; ++ } else { ++ dir_data = DMA_TO_DEVICE; ++ dir_slave = DMA_MEM_TO_DEV; ++ } ++ ++ /* The parameters have already been validated, so this will not fail */ ++ (void)dmaengine_slave_config(dma_chan, ++ (dir_data == DMA_FROM_DEVICE) ? ++ &host->dma_cfg_rx : ++ &host->dma_cfg_tx); ++ ++ BUG_ON(!dma_chan->device); ++ BUG_ON(!dma_chan->device->dev); ++ BUG_ON(!host->data->sg); ++ ++ len = dma_map_sg(dma_chan->device->dev, host->data->sg, ++ host->data->sg_len, dir_data); ++ if (len > 0) { ++ desc = dmaengine_prep_slave_sg(dma_chan, host->data->sg, ++ len, dir_slave, ++ DMA_PREP_INTERRUPT | DMA_CTRL_ACK); ++ } else { ++ dev_err(mmc_dev(host->mmc), "dma_map_sg returned zero length\n"); ++ } ++ if (desc) { ++ unsigned long flags; ++ spin_lock_irqsave(&host->lock, flags); ++ bcm2835_mmc_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL | ++ SDHCI_INT_SPACE_AVAIL); ++ host->tx_desc = desc; ++ desc->callback = bcm2835_mmc_dma_complete; ++ desc->callback_param = host; ++ spin_unlock_irqrestore(&host->lock, flags); ++ dmaengine_submit(desc); ++ dma_async_issue_pending(dma_chan); ++ } ++ ++} ++ ++ ++ ++static void bcm2835_mmc_set_transfer_irqs(struct bcm2835_host *host) ++{ ++ u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL; ++ u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR; ++ ++ if (host->use_dma) ++ host->ier = (host->ier & ~pio_irqs) | dma_irqs; ++ else ++ host->ier = (host->ier & ~dma_irqs) | pio_irqs; ++ ++ bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE, 4); ++ bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE, 4); ++} ++ ++ ++static void bcm2835_mmc_prepare_data(struct bcm2835_host *host, struct mmc_command *cmd) ++{ ++ u8 count; ++ struct mmc_data *data = cmd->data; ++ ++ WARN_ON(host->data); ++ ++ if (data || (cmd->flags & MMC_RSP_BUSY)) { ++ count = TIMEOUT_VAL; ++ bcm2835_mmc_writeb(host, count, SDHCI_TIMEOUT_CONTROL); ++ } ++ ++ if (!data) ++ return; ++ ++ /* Sanity checks */ ++ BUG_ON(data->blksz * data->blocks > 524288); ++ BUG_ON(data->blksz > host->mmc->max_blk_size); ++ BUG_ON(data->blocks > 65535); ++ ++ host->data = data; ++ host->data_early = 0; ++ host->data->bytes_xfered = 0; ++ ++ ++ if (!(host->flags & SDHCI_REQ_USE_DMA)) { ++ int flags; ++ ++ flags = SG_MITER_ATOMIC; ++ if (host->data->flags & MMC_DATA_READ) ++ flags |= SG_MITER_TO_SG; ++ else ++ flags |= SG_MITER_FROM_SG; ++ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); ++ host->blocks = data->blocks; ++ } ++ ++ host->use_dma = host->have_dma && data->blocks > PIO_DMA_BARRIER; ++ ++ bcm2835_mmc_set_transfer_irqs(host); ++ ++ /* Set the DMA boundary value and block size */ ++ bcm2835_mmc_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG, ++ data->blksz), SDHCI_BLOCK_SIZE); ++ bcm2835_mmc_writew(host, data->blocks, SDHCI_BLOCK_COUNT); ++ ++ BUG_ON(!host->data); ++} ++ ++static void bcm2835_mmc_set_transfer_mode(struct bcm2835_host *host, ++ struct mmc_command *cmd) ++{ ++ u16 mode; ++ struct mmc_data *data = cmd->data; ++ ++ if (data == NULL) { ++ /* clear Auto CMD settings for no data CMDs */ ++ mode = bcm2835_mmc_readw(host, SDHCI_TRANSFER_MODE); ++ bcm2835_mmc_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 | ++ SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE); ++ return; ++ } ++ ++ WARN_ON(!host->data); ++ ++ mode = SDHCI_TRNS_BLK_CNT_EN; ++ ++ if ((mmc_op_multi(cmd->opcode) || data->blocks > 1)) { ++ mode |= SDHCI_TRNS_MULTI; ++ ++ /* ++ * If we are sending CMD23, CMD12 never gets sent ++ * on successful completion (so no Auto-CMD12). ++ */ ++ if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) ++ mode |= SDHCI_TRNS_AUTO_CMD12; ++ else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) { ++ mode |= SDHCI_TRNS_AUTO_CMD23; ++ bcm2835_mmc_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2, 5); ++ } ++ } ++ ++ if (data->flags & MMC_DATA_READ) ++ mode |= SDHCI_TRNS_READ; ++ if (host->flags & SDHCI_REQ_USE_DMA) ++ mode |= SDHCI_TRNS_DMA; ++ ++ bcm2835_mmc_writew(host, mode, SDHCI_TRANSFER_MODE); ++} ++ ++void bcm2835_mmc_send_command(struct bcm2835_host *host, struct mmc_command *cmd) ++{ ++ int flags; ++ u32 mask; ++ unsigned long timeout; ++ ++ WARN_ON(host->cmd); ++ ++ /* Wait max 10 ms */ ++ timeout = 1000; ++ ++ mask = SDHCI_CMD_INHIBIT; ++ if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY)) ++ mask |= SDHCI_DATA_INHIBIT; ++ ++ /* We shouldn't wait for data inihibit for stop commands, even ++ though they might use busy signaling */ ++ if (host->mrq->data && (cmd == host->mrq->data->stop)) ++ mask &= ~SDHCI_DATA_INHIBIT; ++ ++ while (bcm2835_mmc_readl(host, SDHCI_PRESENT_STATE) & mask) { ++ if (timeout == 0) { ++ pr_err("%s: Controller never released inhibit bit(s).\n", ++ mmc_hostname(host->mmc)); ++ bcm2835_mmc_dumpregs(host); ++ cmd->error = -EIO; ++ tasklet_schedule(&host->finish_tasklet); ++ return; ++ } ++ timeout--; ++ udelay(10); ++ } ++ ++ if ((1000-timeout)/100 > 1 && (1000-timeout)/100 > host->max_delay) { ++ host->max_delay = (1000-timeout)/100; ++ pr_warning("Warning: MMC controller hung for %d ms\n", host->max_delay); ++ } ++ ++ timeout = jiffies; ++ if (!cmd->data && cmd->busy_timeout > 9000) ++ timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; ++ else ++ timeout += 10 * HZ; ++ mod_timer(&host->timer, timeout); ++ ++ host->cmd = cmd; ++ ++ bcm2835_mmc_prepare_data(host, cmd); ++ ++ bcm2835_mmc_writel(host, cmd->arg, SDHCI_ARGUMENT, 6); ++ ++ bcm2835_mmc_set_transfer_mode(host, cmd); ++ ++ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { ++ pr_err("%s: Unsupported response type!\n", ++ mmc_hostname(host->mmc)); ++ cmd->error = -EINVAL; ++ tasklet_schedule(&host->finish_tasklet); ++ return; ++ } ++ ++ if (!(cmd->flags & MMC_RSP_PRESENT)) ++ flags = SDHCI_CMD_RESP_NONE; ++ else if (cmd->flags & MMC_RSP_136) ++ flags = SDHCI_CMD_RESP_LONG; ++ else if (cmd->flags & MMC_RSP_BUSY) ++ flags = SDHCI_CMD_RESP_SHORT_BUSY; ++ else ++ flags = SDHCI_CMD_RESP_SHORT; ++ ++ if (cmd->flags & MMC_RSP_CRC) ++ flags |= SDHCI_CMD_CRC; ++ if (cmd->flags & MMC_RSP_OPCODE) ++ flags |= SDHCI_CMD_INDEX; ++ ++ if (cmd->data) ++ flags |= SDHCI_CMD_DATA; ++ ++ bcm2835_mmc_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND); ++} ++ ++ ++static void bcm2835_mmc_finish_data(struct bcm2835_host *host) ++{ ++ struct mmc_data *data; ++ ++ BUG_ON(!host->data); ++ ++ data = host->data; ++ host->data = NULL; ++ ++ if (data->error) ++ data->bytes_xfered = 0; ++ else ++ data->bytes_xfered = data->blksz * data->blocks; ++ ++ /* ++ * Need to send CMD12 if - ++ * a) open-ended multiblock transfer (no CMD23) ++ * b) error in multiblock transfer ++ */ ++ if (data->stop && ++ (data->error || ++ !host->mrq->sbc)) { ++ ++ /* ++ * The controller needs a reset of internal state machines ++ * upon error conditions. ++ */ ++ if (data->error) { ++ bcm2835_mmc_reset(host, SDHCI_RESET_CMD); ++ bcm2835_mmc_reset(host, SDHCI_RESET_DATA); ++ } ++ ++ bcm2835_mmc_send_command(host, data->stop); ++ } else ++ tasklet_schedule(&host->finish_tasklet); ++} ++ ++static void bcm2835_mmc_finish_command(struct bcm2835_host *host) ++{ ++ int i; ++ ++ BUG_ON(host->cmd == NULL); ++ ++ if (host->cmd->flags & MMC_RSP_PRESENT) { ++ if (host->cmd->flags & MMC_RSP_136) { ++ /* CRC is stripped so we need to do some shifting. */ ++ for (i = 0; i < 4; i++) { ++ host->cmd->resp[i] = bcm2835_mmc_readl(host, ++ SDHCI_RESPONSE + (3-i)*4) << 8; ++ if (i != 3) ++ host->cmd->resp[i] |= ++ bcm2835_mmc_readb(host, ++ SDHCI_RESPONSE + (3-i)*4-1); ++ } ++ } else { ++ host->cmd->resp[0] = bcm2835_mmc_readl(host, SDHCI_RESPONSE); ++ } ++ } ++ ++ host->cmd->error = 0; ++ ++ /* Finished CMD23, now send actual command. */ ++ if (host->cmd == host->mrq->sbc) { ++ host->cmd = NULL; ++ bcm2835_mmc_send_command(host, host->mrq->cmd); ++ ++ if (host->mrq->cmd->data && host->use_dma) { ++ /* DMA transfer starts now, PIO starts after interrupt */ ++ bcm2835_mmc_transfer_dma(host); ++ } ++ } else { ++ ++ /* Processed actual command. */ ++ if (host->data && host->data_early) ++ bcm2835_mmc_finish_data(host); ++ ++ if (!host->cmd->data) ++ tasklet_schedule(&host->finish_tasklet); ++ ++ host->cmd = NULL; ++ } ++} ++ ++ ++static void bcm2835_mmc_timeout_timer(unsigned long data) ++{ ++ struct bcm2835_host *host; ++ unsigned long flags; ++ ++ host = (struct bcm2835_host *)data; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ if (host->mrq) { ++ pr_err("%s: Timeout waiting for hardware interrupt.\n", ++ mmc_hostname(host->mmc)); ++ bcm2835_mmc_dumpregs(host); ++ ++ if (host->data) { ++ host->data->error = -ETIMEDOUT; ++ bcm2835_mmc_finish_data(host); ++ } else { ++ if (host->cmd) ++ host->cmd->error = -ETIMEDOUT; ++ else ++ host->mrq->cmd->error = -ETIMEDOUT; ++ ++ tasklet_schedule(&host->finish_tasklet); ++ } ++ } ++ ++ mmiowb(); ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++ ++static void bcm2835_mmc_enable_sdio_irq_nolock(struct bcm2835_host *host, int enable) ++{ ++ if (!(host->flags & SDHCI_DEVICE_DEAD)) { ++ if (enable) ++ host->ier |= SDHCI_INT_CARD_INT; ++ else ++ host->ier &= ~SDHCI_INT_CARD_INT; ++ ++ bcm2835_mmc_writel(host, host->ier, SDHCI_INT_ENABLE, 7); ++ bcm2835_mmc_writel(host, host->ier, SDHCI_SIGNAL_ENABLE, 7); ++ mmiowb(); ++ } ++} ++ ++static void bcm2835_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) ++{ ++ struct bcm2835_host *host = mmc_priv(mmc); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ if (enable) ++ host->flags |= SDHCI_SDIO_IRQ_ENABLED; ++ else ++ host->flags &= ~SDHCI_SDIO_IRQ_ENABLED; ++ ++ bcm2835_mmc_enable_sdio_irq_nolock(host, enable); ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_mmc_cmd_irq(struct bcm2835_host *host, u32 intmask) ++{ ++ ++ BUG_ON(intmask == 0); ++ ++ if (!host->cmd) { ++ pr_err("%s: Got command interrupt 0x%08x even " ++ "though no command operation was in progress.\n", ++ mmc_hostname(host->mmc), (unsigned)intmask); ++ bcm2835_mmc_dumpregs(host); ++ return; ++ } ++ ++ if (intmask & SDHCI_INT_TIMEOUT) ++ host->cmd->error = -ETIMEDOUT; ++ else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT | ++ SDHCI_INT_INDEX)) { ++ host->cmd->error = -EILSEQ; ++ } ++ ++ if (host->cmd->error) { ++ tasklet_schedule(&host->finish_tasklet); ++ return; ++ } ++ ++ if (intmask & SDHCI_INT_RESPONSE) ++ bcm2835_mmc_finish_command(host); ++ ++} ++ ++static void bcm2835_mmc_data_irq(struct bcm2835_host *host, u32 intmask) ++{ ++ struct dma_chan *dma_chan; ++ u32 dir_data; ++ ++ BUG_ON(intmask == 0); ++ ++ if (!host->data) { ++ /* ++ * The "data complete" interrupt is also used to ++ * indicate that a busy state has ended. See comment ++ * above in sdhci_cmd_irq(). ++ */ ++ if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) { ++ if (intmask & SDHCI_INT_DATA_END) { ++ bcm2835_mmc_finish_command(host); ++ return; ++ } ++ } ++ ++ pr_debug("%s: Got data interrupt 0x%08x even " ++ "though no data operation was in progress.\n", ++ mmc_hostname(host->mmc), (unsigned)intmask); ++ bcm2835_mmc_dumpregs(host); ++ ++ return; ++ } ++ ++ if (intmask & SDHCI_INT_DATA_TIMEOUT) ++ host->data->error = -ETIMEDOUT; ++ else if (intmask & SDHCI_INT_DATA_END_BIT) ++ host->data->error = -EILSEQ; ++ else if ((intmask & SDHCI_INT_DATA_CRC) && ++ SDHCI_GET_CMD(bcm2835_mmc_readw(host, SDHCI_COMMAND)) ++ != MMC_BUS_TEST_R) ++ host->data->error = -EILSEQ; ++ ++ if (host->use_dma) { ++ if (host->data->flags & MMC_DATA_WRITE) { ++ /* IRQ handled here */ ++ ++ dma_chan = host->dma_chan_rxtx; ++ dir_data = DMA_TO_DEVICE; ++ dma_unmap_sg(dma_chan->device->dev, ++ host->data->sg, host->data->sg_len, ++ dir_data); ++ ++ bcm2835_mmc_finish_data(host); ++ } ++ ++ } else { ++ if (host->data->error) ++ bcm2835_mmc_finish_data(host); ++ else { ++ if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL)) ++ bcm2835_mmc_transfer_pio(host); ++ ++ if (intmask & SDHCI_INT_DATA_END) { ++ if (host->cmd) { ++ /* ++ * Data managed to finish before the ++ * command completed. Make sure we do ++ * things in the proper order. ++ */ ++ host->data_early = 1; ++ } else { ++ bcm2835_mmc_finish_data(host); ++ } ++ } ++ } ++ } ++} ++ ++ ++static irqreturn_t bcm2835_mmc_irq(int irq, void *dev_id) ++{ ++ irqreturn_t result = IRQ_NONE; ++ struct bcm2835_host *host = dev_id; ++ u32 intmask, mask, unexpected = 0; ++ int max_loops = 16; ++ ++ spin_lock(&host->lock); ++ ++ intmask = bcm2835_mmc_readl(host, SDHCI_INT_STATUS); ++ ++ if (!intmask || intmask == 0xffffffff) { ++ result = IRQ_NONE; ++ goto out; ++ } ++ ++ do { ++ /* Clear selected interrupts. */ ++ mask = intmask & (SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK | ++ SDHCI_INT_BUS_POWER); ++ bcm2835_mmc_writel(host, mask, SDHCI_INT_STATUS, 8); ++ ++ ++ if (intmask & SDHCI_INT_CMD_MASK) ++ bcm2835_mmc_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK); ++ ++ if (intmask & SDHCI_INT_DATA_MASK) ++ bcm2835_mmc_data_irq(host, intmask & SDHCI_INT_DATA_MASK); ++ ++ if (intmask & SDHCI_INT_BUS_POWER) ++ pr_err("%s: Card is consuming too much power!\n", ++ mmc_hostname(host->mmc)); ++ ++ if (intmask & SDHCI_INT_CARD_INT) { ++ bcm2835_mmc_enable_sdio_irq_nolock(host, false); ++ host->thread_isr |= SDHCI_INT_CARD_INT; ++ result = IRQ_WAKE_THREAD; ++ } ++ ++ intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE | ++ SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK | ++ SDHCI_INT_ERROR | SDHCI_INT_BUS_POWER | ++ SDHCI_INT_CARD_INT); ++ ++ if (intmask) { ++ unexpected |= intmask; ++ bcm2835_mmc_writel(host, intmask, SDHCI_INT_STATUS, 9); ++ } ++ ++ if (result == IRQ_NONE) ++ result = IRQ_HANDLED; ++ ++ intmask = bcm2835_mmc_readl(host, SDHCI_INT_STATUS); ++ } while (intmask && --max_loops); ++out: ++ spin_unlock(&host->lock); ++ ++ if (unexpected) { ++ pr_err("%s: Unexpected interrupt 0x%08x.\n", ++ mmc_hostname(host->mmc), unexpected); ++ bcm2835_mmc_dumpregs(host); ++ } ++ ++ return result; ++} ++ ++static irqreturn_t bcm2835_mmc_thread_irq(int irq, void *dev_id) ++{ ++ struct bcm2835_host *host = dev_id; ++ unsigned long flags; ++ u32 isr; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ isr = host->thread_isr; ++ host->thread_isr = 0; ++ spin_unlock_irqrestore(&host->lock, flags); ++ ++ if (isr & SDHCI_INT_CARD_INT) { ++ sdio_run_irqs(host->mmc); ++ ++ spin_lock_irqsave(&host->lock, flags); ++ if (host->flags & SDHCI_SDIO_IRQ_ENABLED) ++ bcm2835_mmc_enable_sdio_irq_nolock(host, true); ++ spin_unlock_irqrestore(&host->lock, flags); ++ } ++ ++ return isr ? IRQ_HANDLED : IRQ_NONE; ++} ++ ++ ++ ++void bcm2835_mmc_set_clock(struct bcm2835_host *host, unsigned int clock) ++{ ++ int div = 0; /* Initialized for compiler warning */ ++ int real_div = div, clk_mul = 1; ++ u16 clk = 0; ++ unsigned long timeout; ++ unsigned int input_clock = clock; ++ ++ if (host->overclock_50 && (clock == 50000000)) ++ clock = host->overclock_50 * 1000000 + 999999; ++ ++ host->mmc->actual_clock = 0; ++ ++ bcm2835_mmc_writew(host, 0, SDHCI_CLOCK_CONTROL); ++ ++ if (clock == 0) ++ return; ++ ++ /* Version 3.00 divisors must be a multiple of 2. */ ++ if (host->max_clk <= clock) ++ div = 1; ++ else { ++ for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; ++ div += 2) { ++ if ((host->max_clk / div) <= clock) ++ break; ++ } ++ } ++ ++ real_div = div; ++ div >>= 1; ++ ++ if (real_div) ++ clock = (host->max_clk * clk_mul) / real_div; ++ host->mmc->actual_clock = clock; ++ ++ if ((clock > input_clock) && (clock > host->max_overclock)) { ++ pr_warn("%s: Overclocking to %dHz\n", ++ mmc_hostname(host->mmc), clock); ++ host->max_overclock = clock; ++ } ++ ++ clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT; ++ clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN) ++ << SDHCI_DIVIDER_HI_SHIFT; ++ clk |= SDHCI_CLOCK_INT_EN; ++ bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL); ++ ++ /* Wait max 20 ms */ ++ timeout = 20; ++ while (!((clk = bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL)) ++ & SDHCI_CLOCK_INT_STABLE)) { ++ if (timeout == 0) { ++ pr_err("%s: Internal clock never " ++ "stabilised.\n", mmc_hostname(host->mmc)); ++ bcm2835_mmc_dumpregs(host); ++ return; ++ } ++ timeout--; ++ mdelay(1); ++ } ++ ++ if (20-timeout > 10 && 20-timeout > host->max_delay) { ++ host->max_delay = 20-timeout; ++ pr_warning("Warning: MMC controller hung for %d ms\n", host->max_delay); ++ } ++ ++ clk |= SDHCI_CLOCK_CARD_EN; ++ bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL); ++} ++ ++static void bcm2835_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) ++{ ++ struct bcm2835_host *host; ++ unsigned long flags; ++ ++ host = mmc_priv(mmc); ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ WARN_ON(host->mrq != NULL); ++ ++ host->mrq = mrq; ++ ++ if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) ++ bcm2835_mmc_send_command(host, mrq->sbc); ++ else ++ bcm2835_mmc_send_command(host, mrq->cmd); ++ ++ mmiowb(); ++ spin_unlock_irqrestore(&host->lock, flags); ++ ++ if (!(mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) && mrq->cmd->data && host->use_dma) { ++ /* DMA transfer starts now, PIO starts after interrupt */ ++ bcm2835_mmc_transfer_dma(host); ++ } ++} ++ ++ ++static void bcm2835_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) ++{ ++ ++ struct bcm2835_host *host = mmc_priv(mmc); ++ unsigned long flags; ++ u8 ctrl; ++ u16 clk, ctrl_2; ++ ++ pr_debug("bcm2835_mmc_set_ios: clock %d, pwr %d, bus_width %d, timing %d, vdd %d, drv_type %d\n", ++ ios->clock, ios->power_mode, ios->bus_width, ++ ios->timing, ios->signal_voltage, ios->drv_type); ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ if (!ios->clock || ios->clock != host->clock) { ++ bcm2835_mmc_set_clock(host, ios->clock); ++ host->clock = ios->clock; ++ } ++ ++ if (host->pwr != SDHCI_POWER_330) { ++ host->pwr = SDHCI_POWER_330; ++ bcm2835_mmc_writeb(host, SDHCI_POWER_330 | SDHCI_POWER_ON, SDHCI_POWER_CONTROL); ++ } ++ ++ ctrl = bcm2835_mmc_readb(host, SDHCI_HOST_CONTROL); ++ ++ /* set bus width */ ++ ctrl &= ~SDHCI_CTRL_8BITBUS; ++ if (ios->bus_width == MMC_BUS_WIDTH_4) ++ ctrl |= SDHCI_CTRL_4BITBUS; ++ else ++ ctrl &= ~SDHCI_CTRL_4BITBUS; ++ ++ ctrl &= ~SDHCI_CTRL_HISPD; /* NO_HISPD_BIT */ ++ ++ ++ bcm2835_mmc_writeb(host, ctrl, SDHCI_HOST_CONTROL); ++ /* ++ * We only need to set Driver Strength if the ++ * preset value enable is not set. ++ */ ++ ctrl_2 = bcm2835_mmc_readw(host, SDHCI_HOST_CONTROL2); ++ ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK; ++ if (ios->drv_type == MMC_SET_DRIVER_TYPE_A) ++ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A; ++ else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C) ++ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C; ++ ++ bcm2835_mmc_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); ++ ++ /* Reset SD Clock Enable */ ++ clk = bcm2835_mmc_readw(host, SDHCI_CLOCK_CONTROL); ++ clk &= ~SDHCI_CLOCK_CARD_EN; ++ bcm2835_mmc_writew(host, clk, SDHCI_CLOCK_CONTROL); ++ ++ /* Re-enable SD Clock */ ++ bcm2835_mmc_set_clock(host, host->clock); ++ bcm2835_mmc_writeb(host, ctrl, SDHCI_HOST_CONTROL); ++ ++ mmiowb(); ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++ ++static struct mmc_host_ops bcm2835_ops = { ++ .request = bcm2835_mmc_request, ++ .set_ios = bcm2835_mmc_set_ios, ++ .enable_sdio_irq = bcm2835_mmc_enable_sdio_irq, ++}; ++ ++ ++static void bcm2835_mmc_tasklet_finish(unsigned long param) ++{ ++ struct bcm2835_host *host; ++ unsigned long flags; ++ struct mmc_request *mrq; ++ ++ host = (struct bcm2835_host *)param; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ /* ++ * If this tasklet gets rescheduled while running, it will ++ * be run again afterwards but without any active request. ++ */ ++ if (!host->mrq) { ++ spin_unlock_irqrestore(&host->lock, flags); ++ return; ++ } ++ ++ del_timer(&host->timer); ++ ++ mrq = host->mrq; ++ ++ /* ++ * The controller needs a reset of internal state machines ++ * upon error conditions. ++ */ ++ if (!(host->flags & SDHCI_DEVICE_DEAD) && ++ ((mrq->cmd && mrq->cmd->error) || ++ (mrq->data && (mrq->data->error || ++ (mrq->data->stop && mrq->data->stop->error))))) { ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++ bcm2835_mmc_reset(host, SDHCI_RESET_CMD); ++ bcm2835_mmc_reset(host, SDHCI_RESET_DATA); ++ spin_lock_irqsave(&host->lock, flags); ++ } ++ ++ host->mrq = NULL; ++ host->cmd = NULL; ++ host->data = NULL; ++ ++ mmiowb(); ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++ mmc_request_done(host->mmc, mrq); ++} ++ ++ ++ ++static int bcm2835_mmc_add_host(struct bcm2835_host *host) ++{ ++ struct mmc_host *mmc = host->mmc; ++ struct device *dev = mmc->parent; ++#ifndef FORCE_PIO ++ struct dma_slave_config cfg; ++#endif ++ int ret; ++ ++ bcm2835_mmc_reset(host, SDHCI_RESET_ALL); ++ ++ host->clk_mul = 0; ++ ++ mmc->f_max = host->max_clk; ++ mmc->f_max = host->max_clk; ++ mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300; ++ ++ /* SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK */ ++ host->timeout_clk = mmc->f_max / 1000; ++ mmc->max_busy_timeout = (1 << 27) / host->timeout_clk; ++ ++ /* host controller capabilities */ ++ mmc->caps |= MMC_CAP_CMD23 | MMC_CAP_ERASE | MMC_CAP_NEEDS_POLL | ++ MMC_CAP_SDIO_IRQ | MMC_CAP_SD_HIGHSPEED | ++ MMC_CAP_MMC_HIGHSPEED; ++ ++ mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD; ++ ++ host->flags = SDHCI_AUTO_CMD23; ++ ++ dev_info(dev, "mmc_debug:%x mmc_debug2:%x\n", mmc_debug, mmc_debug2); ++#ifdef FORCE_PIO ++ dev_info(dev, "Forcing PIO mode\n"); ++ host->have_dma = false; ++#else ++ if (IS_ERR_OR_NULL(host->dma_chan_rxtx)) { ++ dev_err(dev, "%s: Unable to initialise DMA channel. Falling back to PIO\n", ++ DRIVER_NAME); ++ host->have_dma = false; ++ } else { ++ dev_info(dev, "DMA channel allocated"); ++ ++ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ cfg.slave_id = 11; /* DREQ channel */ ++ ++ /* Validate the slave configurations */ ++ ++ cfg.direction = DMA_MEM_TO_DEV; ++ cfg.src_addr = 0; ++ cfg.dst_addr = host->bus_addr + SDHCI_BUFFER; ++ ++ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); ++ ++ if (ret == 0) { ++ host->dma_cfg_tx = cfg; ++ ++ cfg.direction = DMA_DEV_TO_MEM; ++ cfg.src_addr = host->bus_addr + SDHCI_BUFFER; ++ cfg.dst_addr = 0; ++ ++ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); ++ } ++ ++ if (ret == 0) { ++ host->dma_cfg_rx = cfg; ++ ++ host->use_dma = true; ++ } else { ++ pr_err("%s: unable to configure DMA channel. " ++ "Faling back to PIO\n", ++ mmc_hostname(mmc)); ++ dma_release_channel(host->dma_chan_rxtx); ++ host->dma_chan_rxtx = NULL; ++ host->use_dma = false; ++ } ++ } ++#endif ++ mmc->max_segs = 128; ++ mmc->max_req_size = 524288; ++ mmc->max_seg_size = mmc->max_req_size; ++ mmc->max_blk_size = 512; ++ mmc->max_blk_count = 65535; ++ ++ /* report supported voltage ranges */ ++ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; ++ ++ tasklet_init(&host->finish_tasklet, ++ bcm2835_mmc_tasklet_finish, (unsigned long)host); ++ ++ setup_timer(&host->timer, bcm2835_mmc_timeout_timer, (unsigned long)host); ++ init_waitqueue_head(&host->buf_ready_int); ++ ++ bcm2835_mmc_init(host, 0); ++ ret = devm_request_threaded_irq(dev, host->irq, bcm2835_mmc_irq, ++ bcm2835_mmc_thread_irq, IRQF_SHARED, ++ mmc_hostname(mmc), host); ++ if (ret) { ++ dev_err(dev, "Failed to request IRQ %d: %d\n", host->irq, ret); ++ goto untasklet; ++ } ++ ++ mmiowb(); ++ mmc_add_host(mmc); ++ ++ return 0; ++ ++untasklet: ++ tasklet_kill(&host->finish_tasklet); ++ ++ return ret; ++} ++ ++static int bcm2835_mmc_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct device_node *node = dev->of_node; ++ struct clk *clk; ++ struct resource *iomem; ++ struct bcm2835_host *host; ++ struct mmc_host *mmc; ++ const __be32 *addr; ++ int ret; ++ ++ mmc = mmc_alloc_host(sizeof(*host), dev); ++ if (!mmc) ++ return -ENOMEM; ++ ++ mmc->ops = &bcm2835_ops; ++ host = mmc_priv(mmc); ++ host->mmc = mmc; ++ host->timeout = msecs_to_jiffies(1000); ++ spin_lock_init(&host->lock); ++ ++ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ host->ioaddr = devm_ioremap_resource(dev, iomem); ++ if (IS_ERR(host->ioaddr)) { ++ ret = PTR_ERR(host->ioaddr); ++ goto err; ++ } ++ ++ addr = of_get_address(node, 0, NULL, NULL); ++ if (!addr) { ++ dev_err(dev, "could not get DMA-register address\n"); ++ return -ENODEV; ++ } ++ host->bus_addr = be32_to_cpup(addr); ++ pr_debug(" - ioaddr %lx, iomem->start %lx, bus_addr %lx\n", ++ (unsigned long)host->ioaddr, ++ (unsigned long)iomem->start, ++ (unsigned long)host->bus_addr); ++ ++#ifndef FORCE_PIO ++ if (node) { ++ host->dma_chan_rxtx = dma_request_slave_channel(dev, "rx-tx"); ++ if (!host->dma_chan_rxtx) ++ host->dma_chan_rxtx = ++ dma_request_slave_channel(dev, "tx"); ++ if (!host->dma_chan_rxtx) ++ host->dma_chan_rxtx = ++ dma_request_slave_channel(dev, "rx"); ++ } else { ++ dma_cap_mask_t mask; ++ ++ dma_cap_zero(mask); ++ /* we don't care about the channel, any would work */ ++ dma_cap_set(DMA_SLAVE, mask); ++ host->dma_chan_rxtx = dma_request_channel(mask, NULL, NULL); ++ } ++#endif ++ clk = devm_clk_get(dev, NULL); ++ if (IS_ERR(clk)) { ++ ret = PTR_ERR(clk); ++ if (ret == -EPROBE_DEFER) ++ dev_info(dev, "could not get clk, deferring probe\n"); ++ else ++ dev_err(dev, "could not get clk\n"); ++ goto err; ++ } ++ ++ host->max_clk = clk_get_rate(clk); ++ ++ host->irq = platform_get_irq(pdev, 0); ++ if (host->irq <= 0) { ++ dev_err(dev, "get IRQ failed\n"); ++ ret = -EINVAL; ++ goto err; ++ } ++ ++ if (node) { ++ mmc_of_parse(mmc); ++ ++ /* Read any custom properties */ ++ of_property_read_u32(node, ++ "brcm,overclock-50", ++ &host->overclock_50); ++ } else { ++ mmc->caps |= MMC_CAP_4_BIT_DATA; ++ } ++ ++ ret = bcm2835_mmc_add_host(host); ++ if (ret) ++ goto err; ++ ++ platform_set_drvdata(pdev, host); ++ ++ return 0; ++err: ++ mmc_free_host(mmc); ++ ++ return ret; ++} ++ ++static int bcm2835_mmc_remove(struct platform_device *pdev) ++{ ++ struct bcm2835_host *host = platform_get_drvdata(pdev); ++ unsigned long flags; ++ int dead; ++ u32 scratch; ++ ++ dead = 0; ++ scratch = bcm2835_mmc_readl(host, SDHCI_INT_STATUS); ++ if (scratch == (u32)-1) ++ dead = 1; ++ ++ ++ if (dead) { ++ spin_lock_irqsave(&host->lock, flags); ++ ++ host->flags |= SDHCI_DEVICE_DEAD; ++ ++ if (host->mrq) { ++ pr_err("%s: Controller removed during " ++ " transfer!\n", mmc_hostname(host->mmc)); ++ ++ host->mrq->cmd->error = -ENOMEDIUM; ++ tasklet_schedule(&host->finish_tasklet); ++ } ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++ } ++ ++ mmc_remove_host(host->mmc); ++ ++ if (!dead) ++ bcm2835_mmc_reset(host, SDHCI_RESET_ALL); ++ ++ free_irq(host->irq, host); ++ ++ del_timer_sync(&host->timer); ++ ++ tasklet_kill(&host->finish_tasklet); ++ ++ mmc_free_host(host->mmc); ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++ ++static const struct of_device_id bcm2835_mmc_match[] = { ++ { .compatible = "brcm,bcm2835-mmc" }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, bcm2835_mmc_match); ++ ++ ++ ++static struct platform_driver bcm2835_mmc_driver = { ++ .probe = bcm2835_mmc_probe, ++ .remove = bcm2835_mmc_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2835_mmc_match, ++ }, ++}; ++module_platform_driver(bcm2835_mmc_driver); ++ ++module_param(mmc_debug, uint, 0644); ++module_param(mmc_debug2, uint, 0644); ++MODULE_ALIAS("platform:mmc-bcm2835"); ++MODULE_DESCRIPTION("BCM2835 SDHCI driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_AUTHOR("Gellert Weisz"); diff --git a/target/linux/brcm2708/patches-4.9/950-0035-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch b/target/linux/brcm2708/patches-4.9/950-0035-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch new file mode 100644 index 000000000000..c4597ec3c1aa --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0035-Adding-bcm2835-sdhost-driver-and-an-overlay-to-enabl.patch @@ -0,0 +1,2399 @@ +From 5da331581bb2a8d90f6a7a7bdf8c1b30efe3cf64 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 25 Mar 2015 17:49:47 +0000 +Subject: [PATCH] Adding bcm2835-sdhost driver, and an overlay to enable it + +BCM2835 has two SD card interfaces. This driver uses the other one. + +bcm2835-sdhost: Error handling fix, and code clarification + +bcm2835-sdhost: Adding overclocking option + +Allow a different clock speed to be substitued for a requested 50MHz. +This option is exposed using the "overclock_50" DT parameter. +Note that the sdhost interface is restricted to integer divisions of +core_freq, and the highest sensible option for a core_freq of 250MHz +is 84 (250/3 = 83.3MHz), the next being 125 (250/2) which is much too +high. + +Use at your own risk. + +bcm2835-sdhost: Round up the overclock, so 62 works for 62.5Mhz + +Also only warn once for each overclock setting. + +bcm2835-sdhost: Improve error handling and recovery + +1) Expose the hw_reset method to the MMC framework, removing many + internal calls by the driver. + +2) Reduce overclock setting on error. + +3) Increase timeout to cope with high capacity cards. + +4) Add properties and parameters to control pio_limit and debug. + +5) Reduce messages at probe time. + +bcm2835-sdhost: Further improve overclock back-off + +bcm2835-sdhost: Clear HBLC for PIO mode + +Also update pio_limit default in overlay README. + +bcm2835-sdhost: Add the ERASE capability + +See: https://github.com/raspberrypi/linux/issues/1076 + +bcm2835-sdhost: Ignore CRC7 for MMC CMD1 + +It seems that the sdhost interface returns CRC7 errors for CMD1, +which is the MMC-specific SEND_OP_COND. Returning these errors to +the MMC layer causes a downward spiral, but ignoring them seems +to be harmless. + +bcm2835-mmc/sdhost: Remove ARCH_BCM2835 differences + +The bcm2835-mmc driver (and -sdhost driver that copied from it) +contains code to handle SDIO interrupts in a threaded interrupt +handler rather than waking the MMC framework thread. The change +follows a patch from Russell King that adds the facility as the +preferred way of working. + +However, the new code path is only present in ARCH_BCM2835 +builds, which I have taken to be a way of testing the waters +rather than making the change across the board; I can't see +any technical reason why it wouldn't be enabled for MACH_BCM270X +builds. So this patch standardises on the ARCH_BCM2835 code, +removing the old code paths. + +bcm2835-sdhost: Don't log timeout errors unless debug=1 + +The MMC card-discovery process generates timeouts. This is +expected behaviour, so reporting it to the user serves no purpose. +Suppress the reporting of timeout errors unless the debug flag +is on. + +bcm2835-sdhost: Add workaround for odd behaviour on some cards + +For reasons not understood, the sdhost driver fails when reading +sectors very near the end of some SD cards. The problem could +be related to the similar issue that reading the final sector +of any card as part of a multiple read never completes, and the +workaround is an extension of the mechanism introduced to solve +that problem which ensures those sectors are always read singly. + +bcm2835-sdhost: Major revision + +This is a significant revision of the bcm2835-sdhost driver. It +improves on the original in a number of ways: + +1) Through the use of CMD23 for reads it appears to avoid problems + reading some sectors on certain high speed cards. +2) Better atomicity to prevent crashes. +3) Higher performance. +4) Activity logging included, for easier diagnosis in the event + of a problem. + +Signed-off-by: Phil Elwell + +bcm2835-sdhost: Restore ATOMIC flag to PIO sg mapping + +Allocation problems have been seen in a wireless driver, and +this is the only change which might have been responsible. + +SQUASH: bcm2835-sdhost: Only claim one DMA channel + +With both MMC controllers enabled there are few DMA channels left. The +bcm2835-sdhost driver only uses DMA in one direction at a time, so it +doesn't need to claim two channels. + +See: https://github.com/raspberrypi/linux/issues/1327 + +Signed-off-by: Phil Elwell + +bcm2835-sdhost: Workaround for "slow" sectors + +Some cards have been seen to cause timeouts after certain sectors are +read. This workaround enforces a minimum delay between the stop after +reading one of those sectors and a subsequent data command. + +Using CMD23 (SET_BLOCK_COUNT) avoids this problem, so good cards will +not be penalised by this workaround. + +Signed-off-by: Phil Elwell + +bcm2835-sdhost: Firmware manages the clock divisor + +The bcm2835-sdhost driver hands control of the CDIV clock divisor +register to matching firmware, allowing it to adjust to a changing +core clock. This removes the need to use the performance governor or +to enable io_is_busy on the on-demand governor in order to get the +best SD performance. + +N.B. As SD clocks must be an integer divisor of the core clock, it is +possible that the SD clock for "turbo" mode can be different (even +lower) than "normal" mode. + +Signed-off-by: Phil Elwell + +bcm2835-sdhost: Reset the clock in task context + +Since reprogramming the clock can now involve a round-trip to the +firmware it must not be done at atomic context, and a tasklet +is not a task. + +Signed-off-by: Phil Elwell + +bcm2835-sdhost: Don't exit cmd wait loop on error + +The FAIL flag can be set in the CMD register before command processing +is complete, leading to spurious "failed to complete" errors. This has +the effect of promoting harmless CRC7 errors during CMD1 processing +into errors that can delay and even prevent booting. + +Also: +1) Convert the last KERN_ERROR message in the register dumping to + KERN_INFO. +2) Remove an unnecessary reset call from bcm2835_sdhost_add_host. + +See: https://github.com/raspberrypi/linux/pull/1492 + +Signed-off-by: Phil Elwell +--- + drivers/mmc/host/Kconfig | 12 +- + drivers/mmc/host/Makefile | 1 + + drivers/mmc/host/bcm2835-sdhost.c | 2189 +++++++++++++++++++++++++++++++++++++ + 3 files changed, 2201 insertions(+), 1 deletion(-) + create mode 100644 drivers/mmc/host/bcm2835-sdhost.c + +--- a/drivers/mmc/host/Kconfig ++++ b/drivers/mmc/host/Kconfig +@@ -6,7 +6,7 @@ comment "MMC/SD/SDIO Host Controller Dri + + config MMC_BCM2835 + tristate "MMC support on BCM2835" +- depends on MACH_BCM2708 || MACH_BCM2709 || ARCH_BCM2835 ++ depends on ARCH_BCM2835 + help + This selects the MMC Interface on BCM2835. + +@@ -33,6 +33,16 @@ config MMC_BCM2835_PIO_DMA_BARRIER + + If unsure, say 2 here. + ++config MMC_BCM2835_SDHOST ++ tristate "Support for the SDHost controller on BCM2708/9" ++ depends on ARCH_BCM2835 ++ help ++ This selects the SDHost controller on BCM2835/6. ++ ++ If you have a controller with this interface, say Y or M here. ++ ++ If unsure, say N. ++ + config MMC_ARMMMCI + tristate "ARM AMBA Multimedia Card Interface support" + depends on ARM_AMBA +--- a/drivers/mmc/host/Makefile ++++ b/drivers/mmc/host/Makefile +@@ -18,6 +18,7 @@ obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c + obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o + obj-$(CONFIG_MMC_SDHCI_F_SDH30) += sdhci_f_sdh30.o + obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o ++obj-$(CONFIG_MMC_BCM2835_SDHOST) += bcm2835-sdhost.o + obj-$(CONFIG_MMC_BCM2835) += bcm2835-mmc.o + obj-$(CONFIG_MMC_WBSD) += wbsd.o + obj-$(CONFIG_MMC_AU1X) += au1xmmc.o +--- /dev/null ++++ b/drivers/mmc/host/bcm2835-sdhost.c +@@ -0,0 +1,2189 @@ ++/* ++ * BCM2835 SD host driver. ++ * ++ * Author: Phil Elwell ++ * Copyright (C) 2015-2016 Raspberry Pi (Trading) Ltd. ++ * ++ * Based on ++ * mmc-bcm2835.c by Gellert Weisz ++ * which is, in turn, based on ++ * sdhci-bcm2708.c by Broadcom ++ * sdhci-bcm2835.c by Stephen Warren and Oleksandr Tymoshenko ++ * sdhci.c and sdhci-pci.c by Pierre Ossman ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms and conditions of the GNU General Public License, ++ * version 2, as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program. If not, see . ++ */ ++ ++#define FIFO_READ_THRESHOLD 4 ++#define FIFO_WRITE_THRESHOLD 4 ++#define ALLOW_CMD23_READ 1 ++#define ALLOW_CMD23_WRITE 0 ++#define ENABLE_LOG 1 ++#define SDDATA_FIFO_PIO_BURST 8 ++#define CMD_DALLY_US 1 ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define DRIVER_NAME "sdhost-bcm2835" ++ ++#define SDCMD 0x00 /* Command to SD card - 16 R/W */ ++#define SDARG 0x04 /* Argument to SD card - 32 R/W */ ++#define SDTOUT 0x08 /* Start value for timeout counter - 32 R/W */ ++#define SDCDIV 0x0c /* Start value for clock divider - 11 R/W */ ++#define SDRSP0 0x10 /* SD card response (31:0) - 32 R */ ++#define SDRSP1 0x14 /* SD card response (63:32) - 32 R */ ++#define SDRSP2 0x18 /* SD card response (95:64) - 32 R */ ++#define SDRSP3 0x1c /* SD card response (127:96) - 32 R */ ++#define SDHSTS 0x20 /* SD host status - 11 R */ ++#define SDVDD 0x30 /* SD card power control - 1 R/W */ ++#define SDEDM 0x34 /* Emergency Debug Mode - 13 R/W */ ++#define SDHCFG 0x38 /* Host configuration - 2 R/W */ ++#define SDHBCT 0x3c /* Host byte count (debug) - 32 R/W */ ++#define SDDATA 0x40 /* Data to/from SD card - 32 R/W */ ++#define SDHBLC 0x50 /* Host block count (SDIO/SDHC) - 9 R/W */ ++ ++#define SDCMD_NEW_FLAG 0x8000 ++#define SDCMD_FAIL_FLAG 0x4000 ++#define SDCMD_BUSYWAIT 0x800 ++#define SDCMD_NO_RESPONSE 0x400 ++#define SDCMD_LONG_RESPONSE 0x200 ++#define SDCMD_WRITE_CMD 0x80 ++#define SDCMD_READ_CMD 0x40 ++#define SDCMD_CMD_MASK 0x3f ++ ++#define SDCDIV_MAX_CDIV 0x7ff ++ ++#define SDHSTS_BUSY_IRPT 0x400 ++#define SDHSTS_BLOCK_IRPT 0x200 ++#define SDHSTS_SDIO_IRPT 0x100 ++#define SDHSTS_REW_TIME_OUT 0x80 ++#define SDHSTS_CMD_TIME_OUT 0x40 ++#define SDHSTS_CRC16_ERROR 0x20 ++#define SDHSTS_CRC7_ERROR 0x10 ++#define SDHSTS_FIFO_ERROR 0x08 ++/* Reserved */ ++/* Reserved */ ++#define SDHSTS_DATA_FLAG 0x01 ++ ++#define SDHSTS_TRANSFER_ERROR_MASK (SDHSTS_CRC7_ERROR|SDHSTS_CRC16_ERROR|SDHSTS_REW_TIME_OUT|SDHSTS_FIFO_ERROR) ++#define SDHSTS_ERROR_MASK (SDHSTS_CMD_TIME_OUT|SDHSTS_TRANSFER_ERROR_MASK) ++ ++#define SDHCFG_BUSY_IRPT_EN (1<<10) ++#define SDHCFG_BLOCK_IRPT_EN (1<<8) ++#define SDHCFG_SDIO_IRPT_EN (1<<5) ++#define SDHCFG_DATA_IRPT_EN (1<<4) ++#define SDHCFG_SLOW_CARD (1<<3) ++#define SDHCFG_WIDE_EXT_BUS (1<<2) ++#define SDHCFG_WIDE_INT_BUS (1<<1) ++#define SDHCFG_REL_CMD_LINE (1<<0) ++ ++#define SDEDM_FORCE_DATA_MODE (1<<19) ++#define SDEDM_CLOCK_PULSE (1<<20) ++#define SDEDM_BYPASS (1<<21) ++ ++#define SDEDM_WRITE_THRESHOLD_SHIFT 9 ++#define SDEDM_READ_THRESHOLD_SHIFT 14 ++#define SDEDM_THRESHOLD_MASK 0x1f ++ ++#define SDEDM_FSM_MASK 0xf ++#define SDEDM_FSM_IDENTMODE 0x0 ++#define SDEDM_FSM_DATAMODE 0x1 ++#define SDEDM_FSM_READDATA 0x2 ++#define SDEDM_FSM_WRITEDATA 0x3 ++#define SDEDM_FSM_READWAIT 0x4 ++#define SDEDM_FSM_READCRC 0x5 ++#define SDEDM_FSM_WRITECRC 0x6 ++#define SDEDM_FSM_WRITEWAIT1 0x7 ++#define SDEDM_FSM_POWERDOWN 0x8 ++#define SDEDM_FSM_POWERUP 0x9 ++#define SDEDM_FSM_WRITESTART1 0xa ++#define SDEDM_FSM_WRITESTART2 0xb ++#define SDEDM_FSM_GENPULSES 0xc ++#define SDEDM_FSM_WRITEWAIT2 0xd ++#define SDEDM_FSM_STARTPOWDOWN 0xf ++ ++#define SDDATA_FIFO_WORDS 16 ++ ++#define USE_CMD23_FLAGS ((ALLOW_CMD23_READ * MMC_DATA_READ) | \ ++ (ALLOW_CMD23_WRITE * MMC_DATA_WRITE)) ++ ++#define MHZ 1000000 ++ ++ ++struct bcm2835_host { ++ spinlock_t lock; ++ ++ void __iomem *ioaddr; ++ u32 bus_addr; ++ ++ struct mmc_host *mmc; ++ ++ u32 pio_timeout; /* In jiffies */ ++ ++ int clock; /* Current clock speed */ ++ ++ bool slow_card; /* Force 11-bit divisor */ ++ ++ unsigned int max_clk; /* Max possible freq */ ++ ++ struct tasklet_struct finish_tasklet; /* Tasklet structures */ ++ ++ struct work_struct cmd_wait_wq; /* Workqueue function */ ++ ++ struct timer_list timer; /* Timer for timeouts */ ++ ++ struct sg_mapping_iter sg_miter; /* SG state for PIO */ ++ unsigned int blocks; /* remaining PIO blocks */ ++ ++ int irq; /* Device IRQ */ ++ ++ u32 cmd_quick_poll_retries; ++ u32 ns_per_fifo_word; ++ ++ /* cached registers */ ++ u32 hcfg; ++ u32 cdiv; ++ ++ struct mmc_request *mrq; /* Current request */ ++ struct mmc_command *cmd; /* Current command */ ++ struct mmc_data *data; /* Current data request */ ++ unsigned int data_complete:1; /* Data finished before cmd */ ++ ++ unsigned int flush_fifo:1; /* Drain the fifo when finishing */ ++ ++ unsigned int use_busy:1; /* Wait for busy interrupt */ ++ ++ unsigned int use_sbc:1; /* Send CMD23 */ ++ ++ unsigned int debug:1; /* Enable debug output */ ++ unsigned int firmware_sets_cdiv:1; /* Let the firmware manage the clock */ ++ unsigned int reset_clock:1; /* Reset the clock fore the next request */ ++ ++ /*DMA part*/ ++ struct dma_chan *dma_chan_rxtx; /* DMA channel for reads and writes */ ++ struct dma_chan *dma_chan; /* Channel in use */ ++ struct dma_slave_config dma_cfg_rx; ++ struct dma_slave_config dma_cfg_tx; ++ struct dma_async_tx_descriptor *dma_desc; ++ u32 dma_dir; ++ u32 drain_words; ++ struct page *drain_page; ++ u32 drain_offset; ++ ++ bool allow_dma; ++ bool use_dma; ++ /*end of DMA part*/ ++ ++ int max_delay; /* maximum length of time spent waiting */ ++ struct timeval stop_time; /* when the last stop was issued */ ++ u32 delay_after_stop; /* minimum time between stop and subsequent data transfer */ ++ u32 delay_after_this_stop; /* minimum time between this stop and subsequent data transfer */ ++ u32 user_overclock_50; /* User's preferred frequency to use when 50MHz is requested (in MHz) */ ++ u32 overclock_50; /* frequency to use when 50MHz is requested (in MHz) */ ++ u32 overclock; /* Current frequency if overclocked, else zero */ ++ u32 pio_limit; /* Maximum block count for PIO (0 = always DMA) */ ++ ++ u32 sectors; /* Cached card size in sectors */ ++}; ++ ++#if ENABLE_LOG ++ ++struct log_entry_struct { ++ char event[4]; ++ u32 timestamp; ++ u32 param1; ++ u32 param2; ++}; ++ ++typedef struct log_entry_struct LOG_ENTRY_T; ++ ++LOG_ENTRY_T *sdhost_log_buf; ++dma_addr_t sdhost_log_addr; ++static u32 sdhost_log_idx; ++static spinlock_t log_lock; ++static void __iomem *timer_base; ++ ++#define LOG_ENTRIES (256*1) ++#define LOG_SIZE (sizeof(LOG_ENTRY_T)*LOG_ENTRIES) ++ ++static void log_init(struct device *dev, u32 bus_to_phys) ++{ ++ spin_lock_init(&log_lock); ++ sdhost_log_buf = dma_zalloc_coherent(dev, LOG_SIZE, &sdhost_log_addr, ++ GFP_KERNEL); ++ if (sdhost_log_buf) { ++ pr_info("sdhost: log_buf @ %p (%x)\n", ++ sdhost_log_buf, sdhost_log_addr); ++ timer_base = ioremap_nocache(bus_to_phys + 0x7e003000, SZ_4K); ++ if (!timer_base) ++ pr_err("sdhost: failed to remap timer\n"); ++ } ++ else ++ pr_err("sdhost: failed to allocate log buf\n"); ++} ++ ++static void log_event_impl(const char *event, u32 param1, u32 param2) ++{ ++ if (sdhost_log_buf) { ++ LOG_ENTRY_T *entry; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&log_lock, flags); ++ ++ entry = sdhost_log_buf + sdhost_log_idx; ++ memcpy(entry->event, event, 4); ++ entry->timestamp = (readl(timer_base + 4) & 0x3fffffff) + ++ (smp_processor_id()<<30); ++ entry->param1 = param1; ++ entry->param2 = param2; ++ sdhost_log_idx = (sdhost_log_idx + 1) % LOG_ENTRIES; ++ ++ spin_unlock_irqrestore(&log_lock, flags); ++ } ++} ++ ++static void log_dump(void) ++{ ++ if (sdhost_log_buf) { ++ LOG_ENTRY_T *entry; ++ unsigned long flags; ++ int idx; ++ ++ spin_lock_irqsave(&log_lock, flags); ++ ++ idx = sdhost_log_idx; ++ do { ++ entry = sdhost_log_buf + idx; ++ if (entry->event[0] != '\0') ++ pr_info("[%08x] %.4s %x %x\n", ++ entry->timestamp, ++ entry->event, ++ entry->param1, ++ entry->param2); ++ idx = (idx + 1) % LOG_ENTRIES; ++ } while (idx != sdhost_log_idx); ++ ++ spin_unlock_irqrestore(&log_lock, flags); ++ } ++} ++ ++#define log_event(event, param1, param2) log_event_impl(event, param1, param2) ++ ++#else ++ ++#define log_init(x) (void)0 ++#define log_event(event, param1, param2) (void)0 ++#define log_dump() (void)0 ++ ++#endif ++ ++static inline void bcm2835_sdhost_write(struct bcm2835_host *host, u32 val, int reg) ++{ ++ writel(val, host->ioaddr + reg); ++} ++ ++static inline u32 bcm2835_sdhost_read(struct bcm2835_host *host, int reg) ++{ ++ return readl(host->ioaddr + reg); ++} ++ ++static inline u32 bcm2835_sdhost_read_relaxed(struct bcm2835_host *host, int reg) ++{ ++ return readl_relaxed(host->ioaddr + reg); ++} ++ ++static void bcm2835_sdhost_dumpcmd(struct bcm2835_host *host, ++ struct mmc_command *cmd, ++ const char *label) ++{ ++ if (cmd) ++ pr_info("%s:%c%s op %d arg 0x%x flags 0x%x - resp %08x %08x %08x %08x, err %d\n", ++ mmc_hostname(host->mmc), ++ (cmd == host->cmd) ? '>' : ' ', ++ label, cmd->opcode, cmd->arg, cmd->flags, ++ cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3], ++ cmd->error); ++} ++ ++static void bcm2835_sdhost_dumpregs(struct bcm2835_host *host) ++{ ++ if (host->mrq) ++ { ++ bcm2835_sdhost_dumpcmd(host, host->mrq->sbc, "sbc"); ++ bcm2835_sdhost_dumpcmd(host, host->mrq->cmd, "cmd"); ++ if (host->mrq->data) ++ pr_info("%s: data blocks %x blksz %x - err %d\n", ++ mmc_hostname(host->mmc), ++ host->mrq->data->blocks, ++ host->mrq->data->blksz, ++ host->mrq->data->error); ++ bcm2835_sdhost_dumpcmd(host, host->mrq->stop, "stop"); ++ } ++ ++ pr_info("%s: =========== REGISTER DUMP ===========\n", ++ mmc_hostname(host->mmc)); ++ ++ pr_info("%s: SDCMD 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDCMD)); ++ pr_info("%s: SDARG 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDARG)); ++ pr_info("%s: SDTOUT 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDTOUT)); ++ pr_info("%s: SDCDIV 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDCDIV)); ++ pr_info("%s: SDRSP0 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDRSP0)); ++ pr_info("%s: SDRSP1 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDRSP1)); ++ pr_info("%s: SDRSP2 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDRSP2)); ++ pr_info("%s: SDRSP3 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDRSP3)); ++ pr_info("%s: SDHSTS 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDHSTS)); ++ pr_info("%s: SDVDD 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDVDD)); ++ pr_info("%s: SDEDM 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDEDM)); ++ pr_info("%s: SDHCFG 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDHCFG)); ++ pr_info("%s: SDHBCT 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDHBCT)); ++ pr_info("%s: SDHBLC 0x%08x\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDHBLC)); ++ ++ pr_info("%s: ===========================================\n", ++ mmc_hostname(host->mmc)); ++} ++ ++static void bcm2835_sdhost_set_power(struct bcm2835_host *host, bool on) ++{ ++ bcm2835_sdhost_write(host, on ? 1 : 0, SDVDD); ++} ++ ++static void bcm2835_sdhost_reset_internal(struct bcm2835_host *host) ++{ ++ u32 temp; ++ ++ if (host->debug) ++ pr_info("%s: reset\n", mmc_hostname(host->mmc)); ++ ++ bcm2835_sdhost_set_power(host, false); ++ ++ bcm2835_sdhost_write(host, 0, SDCMD); ++ bcm2835_sdhost_write(host, 0, SDARG); ++ bcm2835_sdhost_write(host, 0xf00000, SDTOUT); ++ bcm2835_sdhost_write(host, 0, SDCDIV); ++ bcm2835_sdhost_write(host, 0x7f8, SDHSTS); /* Write 1s to clear */ ++ bcm2835_sdhost_write(host, 0, SDHCFG); ++ bcm2835_sdhost_write(host, 0, SDHBCT); ++ bcm2835_sdhost_write(host, 0, SDHBLC); ++ ++ /* Limit fifo usage due to silicon bug */ ++ temp = bcm2835_sdhost_read(host, SDEDM); ++ temp &= ~((SDEDM_THRESHOLD_MASK<clock = 0; ++ host->sectors = 0; ++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG); ++ bcm2835_sdhost_write(host, SDCDIV_MAX_CDIV, SDCDIV); ++ mmiowb(); ++} ++ ++static void bcm2835_sdhost_reset(struct mmc_host *mmc) ++{ ++ struct bcm2835_host *host = mmc_priv(mmc); ++ unsigned long flags; ++ spin_lock_irqsave(&host->lock, flags); ++ log_event("RST<", 0, 0); ++ ++ bcm2835_sdhost_reset_internal(host); ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_sdhost_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); ++ ++static void bcm2835_sdhost_init(struct bcm2835_host *host, int soft) ++{ ++ pr_debug("bcm2835_sdhost_init(%d)\n", soft); ++ ++ /* Set interrupt enables */ ++ host->hcfg = SDHCFG_BUSY_IRPT_EN; ++ ++ bcm2835_sdhost_reset_internal(host); ++ ++ if (soft) { ++ /* force clock reconfiguration */ ++ host->clock = 0; ++ bcm2835_sdhost_set_ios(host->mmc, &host->mmc->ios); ++ } ++} ++ ++static void bcm2835_sdhost_wait_transfer_complete(struct bcm2835_host *host) ++{ ++ int timediff; ++ u32 alternate_idle; ++ u32 edm; ++ ++ alternate_idle = (host->mrq->data->flags & MMC_DATA_READ) ? ++ SDEDM_FSM_READWAIT : SDEDM_FSM_WRITESTART1; ++ ++ edm = bcm2835_sdhost_read(host, SDEDM); ++ ++ log_event("WTC<", edm, 0); ++ ++ timediff = 0; ++ ++ while (1) { ++ u32 fsm = edm & SDEDM_FSM_MASK; ++ if ((fsm == SDEDM_FSM_IDENTMODE) || ++ (fsm == SDEDM_FSM_DATAMODE)) ++ break; ++ if (fsm == alternate_idle) { ++ bcm2835_sdhost_write(host, ++ edm | SDEDM_FORCE_DATA_MODE, ++ SDEDM); ++ break; ++ } ++ ++ timediff++; ++ if (timediff == 100000) { ++ pr_err("%s: wait_transfer_complete - still waiting after %d retries\n", ++ mmc_hostname(host->mmc), ++ timediff); ++ log_dump(); ++ bcm2835_sdhost_dumpregs(host); ++ host->mrq->data->error = -ETIMEDOUT; ++ log_event("WTC!", edm, 0); ++ return; ++ } ++ cpu_relax(); ++ edm = bcm2835_sdhost_read(host, SDEDM); ++ } ++ log_event("WTC>", edm, 0); ++} ++ ++static void bcm2835_sdhost_finish_data(struct bcm2835_host *host); ++ ++static void bcm2835_sdhost_dma_complete(void *param) ++{ ++ struct bcm2835_host *host = param; ++ struct mmc_data *data = host->data; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ log_event("DMA<", (u32)host->data, bcm2835_sdhost_read(host, SDHSTS)); ++ log_event("DMA ", bcm2835_sdhost_read(host, SDCMD), ++ bcm2835_sdhost_read(host, SDEDM)); ++ ++ if (host->dma_chan) { ++ dma_unmap_sg(host->dma_chan->device->dev, ++ data->sg, data->sg_len, ++ host->dma_dir); ++ ++ host->dma_chan = NULL; ++ } ++ ++ if (host->drain_words) { ++ void *page; ++ u32 *buf; ++ ++ page = kmap_atomic(host->drain_page); ++ buf = page + host->drain_offset; ++ ++ while (host->drain_words) { ++ u32 edm = bcm2835_sdhost_read(host, SDEDM); ++ if ((edm >> 4) & 0x1f) ++ *(buf++) = bcm2835_sdhost_read(host, ++ SDDATA); ++ host->drain_words--; ++ } ++ ++ kunmap_atomic(page); ++ } ++ ++ bcm2835_sdhost_finish_data(host); ++ ++ log_event("DMA>", (u32)host->data, 0); ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_sdhost_read_block_pio(struct bcm2835_host *host) ++{ ++ unsigned long flags; ++ size_t blksize, len; ++ u32 *buf; ++ unsigned long wait_max; ++ ++ blksize = host->data->blksz; ++ ++ wait_max = jiffies + msecs_to_jiffies(host->pio_timeout); ++ ++ local_irq_save(flags); ++ ++ while (blksize) { ++ int copy_words; ++ u32 hsts = 0; ++ ++ if (!sg_miter_next(&host->sg_miter)) { ++ host->data->error = -EINVAL; ++ break; ++ } ++ ++ len = min(host->sg_miter.length, blksize); ++ if (len % 4) { ++ host->data->error = -EINVAL; ++ break; ++ } ++ ++ blksize -= len; ++ host->sg_miter.consumed = len; ++ ++ buf = (u32 *)host->sg_miter.addr; ++ ++ copy_words = len/4; ++ ++ while (copy_words) { ++ int burst_words, words; ++ u32 edm; ++ ++ burst_words = SDDATA_FIFO_PIO_BURST; ++ if (burst_words > copy_words) ++ burst_words = copy_words; ++ edm = bcm2835_sdhost_read(host, SDEDM); ++ words = ((edm >> 4) & 0x1f); ++ ++ if (words < burst_words) { ++ int fsm_state = (edm & SDEDM_FSM_MASK); ++ if ((fsm_state != SDEDM_FSM_READDATA) && ++ (fsm_state != SDEDM_FSM_READWAIT) && ++ (fsm_state != SDEDM_FSM_READCRC)) { ++ hsts = bcm2835_sdhost_read(host, ++ SDHSTS); ++ pr_info("%s: fsm %x, hsts %x\n", ++ mmc_hostname(host->mmc), ++ fsm_state, hsts); ++ if (hsts & SDHSTS_ERROR_MASK) ++ break; ++ } ++ ++ if (time_after(jiffies, wait_max)) { ++ pr_err("%s: PIO read timeout - EDM %x\n", ++ mmc_hostname(host->mmc), ++ edm); ++ hsts = SDHSTS_REW_TIME_OUT; ++ break; ++ } ++ ndelay((burst_words - words) * ++ host->ns_per_fifo_word); ++ continue; ++ } else if (words > copy_words) { ++ words = copy_words; ++ } ++ ++ copy_words -= words; ++ ++ while (words) { ++ *(buf++) = bcm2835_sdhost_read(host, SDDATA); ++ words--; ++ } ++ } ++ ++ if (hsts & SDHSTS_ERROR_MASK) ++ break; ++ } ++ ++ sg_miter_stop(&host->sg_miter); ++ ++ local_irq_restore(flags); ++} ++ ++static void bcm2835_sdhost_write_block_pio(struct bcm2835_host *host) ++{ ++ unsigned long flags; ++ size_t blksize, len; ++ u32 *buf; ++ unsigned long wait_max; ++ ++ blksize = host->data->blksz; ++ ++ wait_max = jiffies + msecs_to_jiffies(host->pio_timeout); ++ ++ local_irq_save(flags); ++ ++ while (blksize) { ++ int copy_words; ++ u32 hsts = 0; ++ ++ if (!sg_miter_next(&host->sg_miter)) { ++ host->data->error = -EINVAL; ++ break; ++ } ++ ++ len = min(host->sg_miter.length, blksize); ++ if (len % 4) { ++ host->data->error = -EINVAL; ++ break; ++ } ++ ++ blksize -= len; ++ host->sg_miter.consumed = len; ++ ++ buf = (u32 *)host->sg_miter.addr; ++ ++ copy_words = len/4; ++ ++ while (copy_words) { ++ int burst_words, words; ++ u32 edm; ++ ++ burst_words = SDDATA_FIFO_PIO_BURST; ++ if (burst_words > copy_words) ++ burst_words = copy_words; ++ edm = bcm2835_sdhost_read(host, SDEDM); ++ words = SDDATA_FIFO_WORDS - ((edm >> 4) & 0x1f); ++ ++ if (words < burst_words) { ++ int fsm_state = (edm & SDEDM_FSM_MASK); ++ if ((fsm_state != SDEDM_FSM_WRITEDATA) && ++ (fsm_state != SDEDM_FSM_WRITESTART1) && ++ (fsm_state != SDEDM_FSM_WRITESTART2)) { ++ hsts = bcm2835_sdhost_read(host, ++ SDHSTS); ++ pr_info("%s: fsm %x, hsts %x\n", ++ mmc_hostname(host->mmc), ++ fsm_state, hsts); ++ if (hsts & SDHSTS_ERROR_MASK) ++ break; ++ } ++ ++ if (time_after(jiffies, wait_max)) { ++ pr_err("%s: PIO write timeout - EDM %x\n", ++ mmc_hostname(host->mmc), ++ edm); ++ hsts = SDHSTS_REW_TIME_OUT; ++ break; ++ } ++ ndelay((burst_words - words) * ++ host->ns_per_fifo_word); ++ continue; ++ } else if (words > copy_words) { ++ words = copy_words; ++ } ++ ++ copy_words -= words; ++ ++ while (words) { ++ bcm2835_sdhost_write(host, *(buf++), SDDATA); ++ words--; ++ } ++ } ++ ++ if (hsts & SDHSTS_ERROR_MASK) ++ break; ++ } ++ ++ sg_miter_stop(&host->sg_miter); ++ ++ local_irq_restore(flags); ++} ++ ++static void bcm2835_sdhost_transfer_pio(struct bcm2835_host *host) ++{ ++ u32 sdhsts; ++ bool is_read; ++ BUG_ON(!host->data); ++ log_event("XFP<", (u32)host->data, host->blocks); ++ ++ is_read = (host->data->flags & MMC_DATA_READ) != 0; ++ if (is_read) ++ bcm2835_sdhost_read_block_pio(host); ++ else ++ bcm2835_sdhost_write_block_pio(host); ++ ++ sdhsts = bcm2835_sdhost_read(host, SDHSTS); ++ if (sdhsts & (SDHSTS_CRC16_ERROR | ++ SDHSTS_CRC7_ERROR | ++ SDHSTS_FIFO_ERROR)) { ++ pr_err("%s: %s transfer error - HSTS %x\n", ++ mmc_hostname(host->mmc), ++ is_read ? "read" : "write", ++ sdhsts); ++ host->data->error = -EILSEQ; ++ } else if ((sdhsts & (SDHSTS_CMD_TIME_OUT | ++ SDHSTS_REW_TIME_OUT))) { ++ pr_err("%s: %s timeout error - HSTS %x\n", ++ mmc_hostname(host->mmc), ++ is_read ? "read" : "write", ++ sdhsts); ++ host->data->error = -ETIMEDOUT; ++ } ++ log_event("XFP>", (u32)host->data, host->blocks); ++} ++ ++static void bcm2835_sdhost_prepare_dma(struct bcm2835_host *host, ++ struct mmc_data *data) ++{ ++ int len, dir_data, dir_slave; ++ struct dma_async_tx_descriptor *desc = NULL; ++ struct dma_chan *dma_chan; ++ ++ log_event("PRD<", (u32)data, 0); ++ pr_debug("bcm2835_sdhost_prepare_dma()\n"); ++ ++ dma_chan = host->dma_chan_rxtx; ++ if (data->flags & MMC_DATA_READ) { ++ dir_data = DMA_FROM_DEVICE; ++ dir_slave = DMA_DEV_TO_MEM; ++ } else { ++ dir_data = DMA_TO_DEVICE; ++ dir_slave = DMA_MEM_TO_DEV; ++ } ++ log_event("PRD1", (u32)dma_chan, 0); ++ ++ BUG_ON(!dma_chan->device); ++ BUG_ON(!dma_chan->device->dev); ++ BUG_ON(!data->sg); ++ ++ /* The block doesn't manage the FIFO DREQs properly for multi-block ++ transfers, so don't attempt to DMA the final few words. ++ Unfortunately this requires the final sg entry to be trimmed. ++ N.B. This code demands that the overspill is contained in ++ a single sg entry. ++ */ ++ ++ host->drain_words = 0; ++ if ((data->blocks > 1) && (dir_data == DMA_FROM_DEVICE)) { ++ struct scatterlist *sg; ++ u32 len; ++ int i; ++ ++ len = min((u32)(FIFO_READ_THRESHOLD - 1) * 4, ++ (u32)data->blocks * data->blksz); ++ ++ for_each_sg(data->sg, sg, data->sg_len, i) { ++ if (sg_is_last(sg)) { ++ BUG_ON(sg->length < len); ++ sg->length -= len; ++ host->drain_page = sg_page(sg); ++ host->drain_offset = sg->offset + sg->length; ++ } ++ } ++ host->drain_words = len/4; ++ } ++ ++ /* The parameters have already been validated, so this will not fail */ ++ (void)dmaengine_slave_config(dma_chan, ++ (dir_data == DMA_FROM_DEVICE) ? ++ &host->dma_cfg_rx : ++ &host->dma_cfg_tx); ++ ++ len = dma_map_sg(dma_chan->device->dev, data->sg, data->sg_len, ++ dir_data); ++ ++ log_event("PRD2", len, 0); ++ if (len > 0) ++ desc = dmaengine_prep_slave_sg(dma_chan, data->sg, ++ len, dir_slave, ++ DMA_PREP_INTERRUPT | DMA_CTRL_ACK); ++ log_event("PRD3", (u32)desc, 0); ++ ++ if (desc) { ++ desc->callback = bcm2835_sdhost_dma_complete; ++ desc->callback_param = host; ++ host->dma_desc = desc; ++ host->dma_chan = dma_chan; ++ host->dma_dir = dir_data; ++ } ++ log_event("PDM>", (u32)data, 0); ++} ++ ++static void bcm2835_sdhost_start_dma(struct bcm2835_host *host) ++{ ++ log_event("SDMA", (u32)host->data, (u32)host->dma_chan); ++ dmaengine_submit(host->dma_desc); ++ dma_async_issue_pending(host->dma_chan); ++} ++ ++static void bcm2835_sdhost_set_transfer_irqs(struct bcm2835_host *host) ++{ ++ u32 all_irqs = SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN | ++ SDHCFG_BUSY_IRPT_EN; ++ if (host->dma_desc) ++ host->hcfg = (host->hcfg & ~all_irqs) | ++ SDHCFG_BUSY_IRPT_EN; ++ else ++ host->hcfg = (host->hcfg & ~all_irqs) | ++ SDHCFG_DATA_IRPT_EN | ++ SDHCFG_BUSY_IRPT_EN; ++ ++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG); ++} ++ ++static void bcm2835_sdhost_prepare_data(struct bcm2835_host *host, struct mmc_command *cmd) ++{ ++ struct mmc_data *data = cmd->data; ++ ++ WARN_ON(host->data); ++ ++ host->data = data; ++ if (!data) ++ return; ++ ++ /* Sanity checks */ ++ BUG_ON(data->blksz * data->blocks > 524288); ++ BUG_ON(data->blksz > host->mmc->max_blk_size); ++ BUG_ON(data->blocks > 65535); ++ ++ host->data_complete = 0; ++ host->flush_fifo = 0; ++ host->data->bytes_xfered = 0; ++ ++ if (!host->sectors && host->mmc->card) { ++ struct mmc_card *card = host->mmc->card; ++ if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) { ++ /* ++ * The EXT_CSD sector count is in number of 512 byte ++ * sectors. ++ */ ++ host->sectors = card->ext_csd.sectors; ++ } else { ++ /* ++ * The CSD capacity field is in units of read_blkbits. ++ * set_capacity takes units of 512 bytes. ++ */ ++ host->sectors = card->csd.capacity << ++ (card->csd.read_blkbits - 9); ++ } ++ } ++ ++ if (!host->dma_desc) { ++ /* Use PIO */ ++ int flags = SG_MITER_ATOMIC; ++ ++ if (data->flags & MMC_DATA_READ) ++ flags |= SG_MITER_TO_SG; ++ else ++ flags |= SG_MITER_FROM_SG; ++ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); ++ host->blocks = data->blocks; ++ } ++ ++ bcm2835_sdhost_set_transfer_irqs(host); ++ ++ bcm2835_sdhost_write(host, data->blksz, SDHBCT); ++ bcm2835_sdhost_write(host, data->blocks, SDHBLC); ++ ++ BUG_ON(!host->data); ++} ++ ++bool bcm2835_sdhost_send_command(struct bcm2835_host *host, ++ struct mmc_command *cmd) ++{ ++ u32 sdcmd, sdhsts; ++ unsigned long timeout; ++ int delay; ++ ++ WARN_ON(host->cmd); ++ log_event("CMD<", cmd->opcode, cmd->arg); ++ ++ if (cmd->data) ++ pr_debug("%s: send_command %d 0x%x " ++ "(flags 0x%x) - %s %d*%d\n", ++ mmc_hostname(host->mmc), ++ cmd->opcode, cmd->arg, cmd->flags, ++ (cmd->data->flags & MMC_DATA_READ) ? ++ "read" : "write", cmd->data->blocks, ++ cmd->data->blksz); ++ else ++ pr_debug("%s: send_command %d 0x%x (flags 0x%x)\n", ++ mmc_hostname(host->mmc), ++ cmd->opcode, cmd->arg, cmd->flags); ++ ++ /* Wait max 100 ms */ ++ timeout = 10000; ++ ++ while (bcm2835_sdhost_read(host, SDCMD) & SDCMD_NEW_FLAG) { ++ if (timeout == 0) { ++ pr_warn("%s: previous command never completed.\n", ++ mmc_hostname(host->mmc)); ++ if (host->debug) ++ bcm2835_sdhost_dumpregs(host); ++ cmd->error = -EILSEQ; ++ tasklet_schedule(&host->finish_tasklet); ++ return false; ++ } ++ timeout--; ++ udelay(10); ++ } ++ ++ delay = (10000 - timeout)/100; ++ if (delay > host->max_delay) { ++ host->max_delay = delay; ++ pr_warning("%s: controller hung for %d ms\n", ++ mmc_hostname(host->mmc), ++ host->max_delay); ++ } ++ ++ timeout = jiffies; ++ if (!cmd->data && cmd->busy_timeout > 9000) ++ timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; ++ else ++ timeout += 10 * HZ; ++ mod_timer(&host->timer, timeout); ++ ++ host->cmd = cmd; ++ ++ /* Clear any error flags */ ++ sdhsts = bcm2835_sdhost_read(host, SDHSTS); ++ if (sdhsts & SDHSTS_ERROR_MASK) ++ bcm2835_sdhost_write(host, sdhsts, SDHSTS); ++ ++ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { ++ pr_err("%s: unsupported response type!\n", ++ mmc_hostname(host->mmc)); ++ cmd->error = -EINVAL; ++ tasklet_schedule(&host->finish_tasklet); ++ return false; ++ } ++ ++ bcm2835_sdhost_prepare_data(host, cmd); ++ ++ bcm2835_sdhost_write(host, cmd->arg, SDARG); ++ ++ sdcmd = cmd->opcode & SDCMD_CMD_MASK; ++ ++ host->use_busy = 0; ++ if (!(cmd->flags & MMC_RSP_PRESENT)) { ++ sdcmd |= SDCMD_NO_RESPONSE; ++ } else { ++ if (cmd->flags & MMC_RSP_136) ++ sdcmd |= SDCMD_LONG_RESPONSE; ++ if (cmd->flags & MMC_RSP_BUSY) { ++ sdcmd |= SDCMD_BUSYWAIT; ++ host->use_busy = 1; ++ } ++ } ++ ++ if (cmd->data) { ++ log_event("CMDD", cmd->data->blocks, cmd->data->blksz); ++ if (host->delay_after_this_stop) { ++ struct timeval now; ++ int time_since_stop; ++ do_gettimeofday(&now); ++ time_since_stop = (now.tv_sec - host->stop_time.tv_sec); ++ if (time_since_stop < 2) { ++ /* Possibly less than one second */ ++ time_since_stop = time_since_stop * 1000000 + ++ (now.tv_usec - host->stop_time.tv_usec); ++ if (time_since_stop < ++ host->delay_after_this_stop) ++ udelay(host->delay_after_this_stop - ++ time_since_stop); ++ } ++ } ++ ++ host->delay_after_this_stop = host->delay_after_stop; ++ if ((cmd->data->flags & MMC_DATA_READ) && !host->use_sbc) { ++ /* See if read crosses one of the hazardous sectors */ ++ u32 first_blk, last_blk; ++ ++ /* Intentionally include the following sector because ++ without CMD23/SBC the read may run on. */ ++ first_blk = host->mrq->cmd->arg; ++ last_blk = first_blk + cmd->data->blocks; ++ ++ if (((last_blk >= (host->sectors - 64)) && ++ (first_blk <= (host->sectors - 64))) || ++ ((last_blk >= (host->sectors - 32)) && ++ (first_blk <= (host->sectors - 32)))) { ++ host->delay_after_this_stop = ++ max(250u, host->delay_after_stop); ++ } ++ } ++ ++ if (cmd->data->flags & MMC_DATA_WRITE) ++ sdcmd |= SDCMD_WRITE_CMD; ++ if (cmd->data->flags & MMC_DATA_READ) ++ sdcmd |= SDCMD_READ_CMD; ++ } ++ ++ bcm2835_sdhost_write(host, sdcmd | SDCMD_NEW_FLAG, SDCMD); ++ ++ return true; ++} ++ ++static void bcm2835_sdhost_finish_command(struct bcm2835_host *host, ++ unsigned long *irq_flags); ++static void bcm2835_sdhost_transfer_complete(struct bcm2835_host *host); ++ ++static void bcm2835_sdhost_finish_data(struct bcm2835_host *host) ++{ ++ struct mmc_data *data; ++ ++ data = host->data; ++ BUG_ON(!data); ++ ++ log_event("FDA<", (u32)host->mrq, (u32)host->cmd); ++ pr_debug("finish_data(error %d, stop %d, sbc %d)\n", ++ data->error, data->stop ? 1 : 0, ++ host->mrq->sbc ? 1 : 0); ++ ++ host->hcfg &= ~(SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN); ++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG); ++ ++ data->bytes_xfered = data->error ? 0 : (data->blksz * data->blocks); ++ ++ host->data_complete = 1; ++ ++ if (host->cmd) { ++ /* ++ * Data managed to finish before the ++ * command completed. Make sure we do ++ * things in the proper order. ++ */ ++ pr_debug("Finished early - HSTS %x\n", ++ bcm2835_sdhost_read(host, SDHSTS)); ++ } ++ else ++ bcm2835_sdhost_transfer_complete(host); ++ log_event("FDA>", (u32)host->mrq, (u32)host->cmd); ++} ++ ++static void bcm2835_sdhost_transfer_complete(struct bcm2835_host *host) ++{ ++ struct mmc_data *data; ++ ++ BUG_ON(host->cmd); ++ BUG_ON(!host->data); ++ BUG_ON(!host->data_complete); ++ ++ data = host->data; ++ host->data = NULL; ++ ++ log_event("TCM<", (u32)data, data->error); ++ pr_debug("transfer_complete(error %d, stop %d)\n", ++ data->error, data->stop ? 1 : 0); ++ ++ /* ++ * Need to send CMD12 if - ++ * a) open-ended multiblock transfer (no CMD23) ++ * b) error in multiblock transfer ++ */ ++ if (host->mrq->stop && (data->error || !host->use_sbc)) { ++ if (bcm2835_sdhost_send_command(host, host->mrq->stop)) { ++ /* No busy, so poll for completion */ ++ if (!host->use_busy) ++ bcm2835_sdhost_finish_command(host, NULL); ++ ++ if (host->delay_after_this_stop) ++ do_gettimeofday(&host->stop_time); ++ } ++ } else { ++ bcm2835_sdhost_wait_transfer_complete(host); ++ tasklet_schedule(&host->finish_tasklet); ++ } ++ log_event("TCM>", (u32)data, 0); ++} ++ ++/* If irq_flags is valid, the caller is in a thread context and is allowed ++ to sleep */ ++static void bcm2835_sdhost_finish_command(struct bcm2835_host *host, ++ unsigned long *irq_flags) ++{ ++ u32 sdcmd; ++ u32 retries; ++#ifdef DEBUG ++ struct timeval before, after; ++ int timediff = 0; ++#endif ++ ++ log_event("FCM<", (u32)host->mrq, (u32)host->cmd); ++ pr_debug("finish_command(%x)\n", bcm2835_sdhost_read(host, SDCMD)); ++ ++ BUG_ON(!host->cmd || !host->mrq); ++ ++ /* Poll quickly at first */ ++ ++ retries = host->cmd_quick_poll_retries; ++ if (!retries) { ++ /* Work out how many polls take 1us by timing 10us */ ++ struct timeval start, now; ++ int us_diff; ++ ++ retries = 1; ++ do { ++ int i; ++ ++ retries *= 2; ++ ++ do_gettimeofday(&start); ++ ++ for (i = 0; i < retries; i++) { ++ cpu_relax(); ++ sdcmd = bcm2835_sdhost_read(host, SDCMD); ++ } ++ ++ do_gettimeofday(&now); ++ us_diff = (now.tv_sec - start.tv_sec) * 1000000 + ++ (now.tv_usec - start.tv_usec); ++ } while (us_diff < 10); ++ ++ host->cmd_quick_poll_retries = ((retries * us_diff + 9)*CMD_DALLY_US)/10 + 1; ++ retries = 1; // We've already waited long enough this time ++ } ++ ++ for (sdcmd = bcm2835_sdhost_read(host, SDCMD); ++ (sdcmd & SDCMD_NEW_FLAG) && retries; ++ retries--) { ++ cpu_relax(); ++ sdcmd = bcm2835_sdhost_read(host, SDCMD); ++ } ++ ++ if (!retries) { ++ unsigned long wait_max; ++ ++ if (!irq_flags) { ++ /* Schedule the work */ ++ log_event("CWWQ", 0, 0); ++ schedule_work(&host->cmd_wait_wq); ++ return; ++ } ++ ++ /* Wait max 100 ms */ ++ wait_max = jiffies + msecs_to_jiffies(100); ++ while (time_before(jiffies, wait_max)) { ++ spin_unlock_irqrestore(&host->lock, *irq_flags); ++ usleep_range(1, 10); ++ spin_lock_irqsave(&host->lock, *irq_flags); ++ sdcmd = bcm2835_sdhost_read(host, SDCMD); ++ if (!(sdcmd & SDCMD_NEW_FLAG)) ++ break; ++ } ++ } ++ ++ /* Check for errors */ ++ if (sdcmd & SDCMD_NEW_FLAG) { ++ if (host->debug) { ++ pr_err("%s: command %d never completed.\n", ++ mmc_hostname(host->mmc), host->cmd->opcode); ++ bcm2835_sdhost_dumpregs(host); ++ } ++ host->cmd->error = -EILSEQ; ++ tasklet_schedule(&host->finish_tasklet); ++ return; ++ } else if (sdcmd & SDCMD_FAIL_FLAG) { ++ u32 sdhsts = bcm2835_sdhost_read(host, SDHSTS); ++ ++ /* Clear the errors */ ++ bcm2835_sdhost_write(host, SDHSTS_ERROR_MASK, SDHSTS); ++ ++ if (host->debug) ++ pr_info("%s: error detected - CMD %x, HSTS %03x, EDM %x\n", ++ mmc_hostname(host->mmc), sdcmd, sdhsts, ++ bcm2835_sdhost_read(host, SDEDM)); ++ ++ if ((sdhsts & SDHSTS_CRC7_ERROR) && ++ (host->cmd->opcode == 1)) { ++ if (host->debug) ++ pr_info("%s: ignoring CRC7 error for CMD1\n", ++ mmc_hostname(host->mmc)); ++ } else { ++ if (sdhsts & SDHSTS_CMD_TIME_OUT) { ++ if (host->debug) ++ pr_warn("%s: command %d timeout\n", ++ mmc_hostname(host->mmc), ++ host->cmd->opcode); ++ host->cmd->error = -ETIMEDOUT; ++ } else { ++ pr_warn("%s: unexpected command %d error\n", ++ mmc_hostname(host->mmc), ++ host->cmd->opcode); ++ host->cmd->error = -EILSEQ; ++ } ++ tasklet_schedule(&host->finish_tasklet); ++ return; ++ } ++ } ++ ++ if (host->cmd->flags & MMC_RSP_PRESENT) { ++ if (host->cmd->flags & MMC_RSP_136) { ++ int i; ++ for (i = 0; i < 4; i++) ++ host->cmd->resp[3 - i] = bcm2835_sdhost_read(host, SDRSP0 + i*4); ++ pr_debug("%s: finish_command %08x %08x %08x %08x\n", ++ mmc_hostname(host->mmc), ++ host->cmd->resp[0], host->cmd->resp[1], host->cmd->resp[2], host->cmd->resp[3]); ++ log_event("RSP ", host->cmd->resp[0], host->cmd->resp[1]); ++ } else { ++ host->cmd->resp[0] = bcm2835_sdhost_read(host, SDRSP0); ++ pr_debug("%s: finish_command %08x\n", ++ mmc_hostname(host->mmc), ++ host->cmd->resp[0]); ++ log_event("RSP ", host->cmd->resp[0], 0); ++ } ++ } ++ ++ if (host->cmd == host->mrq->sbc) { ++ /* Finished CMD23, now send actual command. */ ++ host->cmd = NULL; ++ if (bcm2835_sdhost_send_command(host, host->mrq->cmd)) { ++ if (host->data && host->dma_desc) ++ /* DMA transfer starts now, PIO starts after irq */ ++ bcm2835_sdhost_start_dma(host); ++ ++ if (!host->use_busy) ++ bcm2835_sdhost_finish_command(host, NULL); ++ } ++ } else if (host->cmd == host->mrq->stop) { ++ /* Finished CMD12 */ ++ tasklet_schedule(&host->finish_tasklet); ++ } else { ++ /* Processed actual command. */ ++ host->cmd = NULL; ++ if (!host->data) ++ tasklet_schedule(&host->finish_tasklet); ++ else if (host->data_complete) ++ bcm2835_sdhost_transfer_complete(host); ++ } ++ log_event("FCM>", (u32)host->mrq, (u32)host->cmd); ++} ++ ++static void bcm2835_sdhost_timeout(unsigned long data) ++{ ++ struct bcm2835_host *host; ++ unsigned long flags; ++ ++ host = (struct bcm2835_host *)data; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ log_event("TIM<", 0, 0); ++ ++ if (host->mrq) { ++ pr_err("%s: timeout waiting for hardware interrupt.\n", ++ mmc_hostname(host->mmc)); ++ log_dump(); ++ bcm2835_sdhost_dumpregs(host); ++ ++ if (host->data) { ++ host->data->error = -ETIMEDOUT; ++ bcm2835_sdhost_finish_data(host); ++ } else { ++ if (host->cmd) ++ host->cmd->error = -ETIMEDOUT; ++ else ++ host->mrq->cmd->error = -ETIMEDOUT; ++ ++ pr_debug("timeout_timer tasklet_schedule\n"); ++ tasklet_schedule(&host->finish_tasklet); ++ } ++ } ++ ++ mmiowb(); ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_sdhost_busy_irq(struct bcm2835_host *host, u32 intmask) ++{ ++ log_event("IRQB", (u32)host->cmd, intmask); ++ if (!host->cmd) { ++ pr_err("%s: got command busy interrupt 0x%08x even " ++ "though no command operation was in progress.\n", ++ mmc_hostname(host->mmc), (unsigned)intmask); ++ bcm2835_sdhost_dumpregs(host); ++ return; ++ } ++ ++ if (!host->use_busy) { ++ pr_err("%s: got command busy interrupt 0x%08x even " ++ "though not expecting one.\n", ++ mmc_hostname(host->mmc), (unsigned)intmask); ++ bcm2835_sdhost_dumpregs(host); ++ return; ++ } ++ host->use_busy = 0; ++ ++ if (intmask & SDHSTS_ERROR_MASK) ++ { ++ pr_err("sdhost_busy_irq: intmask %x, data %p\n", intmask, host->mrq->data); ++ if (intmask & SDHSTS_CRC7_ERROR) ++ host->cmd->error = -EILSEQ; ++ else if (intmask & (SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR)) { ++ if (host->mrq->data) ++ host->mrq->data->error = -EILSEQ; ++ else ++ host->cmd->error = -EILSEQ; ++ } else if (intmask & SDHSTS_REW_TIME_OUT) { ++ if (host->mrq->data) ++ host->mrq->data->error = -ETIMEDOUT; ++ else ++ host->cmd->error = -ETIMEDOUT; ++ } else if (intmask & SDHSTS_CMD_TIME_OUT) ++ host->cmd->error = -ETIMEDOUT; ++ ++ if (host->debug) { ++ log_dump(); ++ bcm2835_sdhost_dumpregs(host); ++ } ++ } ++ else ++ bcm2835_sdhost_finish_command(host, NULL); ++} ++ ++static void bcm2835_sdhost_data_irq(struct bcm2835_host *host, u32 intmask) ++{ ++ /* There are no dedicated data/space available interrupt ++ status bits, so it is necessary to use the single shared ++ data/space available FIFO status bits. It is therefore not ++ an error to get here when there is no data transfer in ++ progress. */ ++ log_event("IRQD", (u32)host->data, intmask); ++ if (!host->data) ++ return; ++ ++ if (intmask & (SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR | ++ SDHSTS_REW_TIME_OUT)) { ++ if (intmask & (SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR)) ++ host->data->error = -EILSEQ; ++ else ++ host->data->error = -ETIMEDOUT; ++ ++ if (host->debug) { ++ log_dump(); ++ bcm2835_sdhost_dumpregs(host); ++ } ++ } ++ ++ if (host->data->error) { ++ bcm2835_sdhost_finish_data(host); ++ } else if (host->data->flags & MMC_DATA_WRITE) { ++ /* Use the block interrupt for writes after the first block */ ++ host->hcfg &= ~(SDHCFG_DATA_IRPT_EN); ++ host->hcfg |= SDHCFG_BLOCK_IRPT_EN; ++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG); ++ bcm2835_sdhost_transfer_pio(host); ++ } else { ++ bcm2835_sdhost_transfer_pio(host); ++ host->blocks--; ++ if ((host->blocks == 0) || host->data->error) ++ bcm2835_sdhost_finish_data(host); ++ } ++} ++ ++static void bcm2835_sdhost_block_irq(struct bcm2835_host *host, u32 intmask) ++{ ++ log_event("IRQK", (u32)host->data, intmask); ++ if (!host->data) { ++ pr_err("%s: got block interrupt 0x%08x even " ++ "though no data operation was in progress.\n", ++ mmc_hostname(host->mmc), (unsigned)intmask); ++ bcm2835_sdhost_dumpregs(host); ++ return; ++ } ++ ++ if (intmask & (SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR | ++ SDHSTS_REW_TIME_OUT)) { ++ if (intmask & (SDHSTS_CRC16_ERROR | ++ SDHSTS_FIFO_ERROR)) ++ host->data->error = -EILSEQ; ++ else ++ host->data->error = -ETIMEDOUT; ++ ++ if (host->debug) { ++ log_dump(); ++ bcm2835_sdhost_dumpregs(host); ++ } ++ } ++ ++ if (!host->dma_desc) { ++ BUG_ON(!host->blocks); ++ if (host->data->error || (--host->blocks == 0)) { ++ bcm2835_sdhost_finish_data(host); ++ } else { ++ bcm2835_sdhost_transfer_pio(host); ++ } ++ } else if (host->data->flags & MMC_DATA_WRITE) { ++ bcm2835_sdhost_finish_data(host); ++ } ++} ++ ++static irqreturn_t bcm2835_sdhost_irq(int irq, void *dev_id) ++{ ++ irqreturn_t result = IRQ_NONE; ++ struct bcm2835_host *host = dev_id; ++ u32 intmask; ++ ++ spin_lock(&host->lock); ++ ++ intmask = bcm2835_sdhost_read(host, SDHSTS); ++ log_event("IRQ<", intmask, 0); ++ ++ bcm2835_sdhost_write(host, ++ SDHSTS_BUSY_IRPT | ++ SDHSTS_BLOCK_IRPT | ++ SDHSTS_SDIO_IRPT | ++ SDHSTS_DATA_FLAG, ++ SDHSTS); ++ ++ if (intmask & SDHSTS_BLOCK_IRPT) { ++ bcm2835_sdhost_block_irq(host, intmask); ++ result = IRQ_HANDLED; ++ } ++ ++ if (intmask & SDHSTS_BUSY_IRPT) { ++ bcm2835_sdhost_busy_irq(host, intmask); ++ result = IRQ_HANDLED; ++ } ++ ++ /* There is no true data interrupt status bit, so it is ++ necessary to qualify the data flag with the interrupt ++ enable bit */ ++ if ((intmask & SDHSTS_DATA_FLAG) && ++ (host->hcfg & SDHCFG_DATA_IRPT_EN)) { ++ bcm2835_sdhost_data_irq(host, intmask); ++ result = IRQ_HANDLED; ++ } ++ ++ mmiowb(); ++ ++ log_event("IRQ>", bcm2835_sdhost_read(host, SDHSTS), 0); ++ spin_unlock(&host->lock); ++ ++ return result; ++} ++ ++void bcm2835_sdhost_set_clock(struct bcm2835_host *host, unsigned int clock) ++{ ++ int div = 0; /* Initialized for compiler warning */ ++ unsigned int input_clock = clock; ++ unsigned long flags; ++ ++ if (host->debug) ++ pr_info("%s: set_clock(%d)\n", mmc_hostname(host->mmc), clock); ++ ++ if ((host->overclock_50 > 50) && ++ (clock == 50*MHZ)) ++ clock = host->overclock_50 * MHZ + (MHZ - 1); ++ ++ /* The SDCDIV register has 11 bits, and holds (div - 2). ++ But in data mode the max is 50MHz wihout a minimum, and only the ++ bottom 3 bits are used. Since the switch over is automatic (unless ++ we have marked the card as slow...), chosen values have to make ++ sense in both modes. ++ Ident mode must be 100-400KHz, so can range check the requested ++ clock. CMD15 must be used to return to data mode, so this can be ++ monitored. ++ ++ clock 250MHz -> 0->125MHz, 1->83.3MHz, 2->62.5MHz, 3->50.0MHz ++ 4->41.7MHz, 5->35.7MHz, 6->31.3MHz, 7->27.8MHz ++ ++ 623->400KHz/27.8MHz ++ reset value (507)->491159/50MHz ++ ++ BUT, the 3-bit clock divisor in data mode is too small if the ++ core clock is higher than 250MHz, so instead use the SLOW_CARD ++ configuration bit to force the use of the ident clock divisor ++ at all times. ++ */ ++ ++ host->mmc->actual_clock = 0; ++ ++ if (host->firmware_sets_cdiv) { ++ u32 msg[3] = { clock, 0, 0 }; ++ ++ rpi_firmware_property(rpi_firmware_get(NULL), ++ RPI_FIRMWARE_SET_SDHOST_CLOCK, ++ &msg, sizeof(msg)); ++ ++ clock = max(msg[1], msg[2]); ++ spin_lock_irqsave(&host->lock, flags); ++ } else { ++ spin_lock_irqsave(&host->lock, flags); ++ if (clock < 100000) { ++ /* Can't stop the clock, but make it as slow as ++ * possible to show willing ++ */ ++ host->cdiv = SDCDIV_MAX_CDIV; ++ bcm2835_sdhost_write(host, host->cdiv, SDCDIV); ++ mmiowb(); ++ spin_unlock_irqrestore(&host->lock, flags); ++ return; ++ } ++ ++ div = host->max_clk / clock; ++ if (div < 2) ++ div = 2; ++ if ((host->max_clk / div) > clock) ++ div++; ++ div -= 2; ++ ++ if (div > SDCDIV_MAX_CDIV) ++ div = SDCDIV_MAX_CDIV; ++ ++ clock = host->max_clk / (div + 2); ++ ++ host->cdiv = div; ++ bcm2835_sdhost_write(host, host->cdiv, SDCDIV); ++ ++ if (host->debug) ++ pr_info("%s: clock=%d -> max_clk=%d, cdiv=%x " ++ "(actual clock %d)\n", ++ mmc_hostname(host->mmc), input_clock, ++ host->max_clk, host->cdiv, ++ clock); ++ } ++ ++ /* Calibrate some delays */ ++ ++ host->ns_per_fifo_word = (1000000000/clock) * ++ ((host->mmc->caps & MMC_CAP_4_BIT_DATA) ? 8 : 32); ++ ++ if (input_clock == 50 * MHZ) { ++ if (clock > input_clock) { ++ /* Save the closest value, to make it easier ++ to reduce in the event of error */ ++ host->overclock_50 = (clock/MHZ); ++ ++ if (clock != host->overclock) { ++ pr_info("%s: overclocking to %dHz\n", ++ mmc_hostname(host->mmc), clock); ++ host->overclock = clock; ++ } ++ } else if (host->overclock) { ++ host->overclock = 0; ++ if (clock == 50 * MHZ) ++ pr_warn("%s: cancelling overclock\n", ++ mmc_hostname(host->mmc)); ++ } ++ } else if (input_clock == 0) { ++ /* Reset the preferred overclock when the clock is stopped. ++ * This always happens during initialisation. */ ++ host->overclock_50 = host->user_overclock_50; ++ host->overclock = 0; ++ } ++ ++ /* Set the timeout to 500ms */ ++ bcm2835_sdhost_write(host, clock/2, SDTOUT); ++ ++ host->mmc->actual_clock = clock; ++ host->clock = input_clock; ++ host->reset_clock = 0; ++ ++ mmiowb(); ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_sdhost_request(struct mmc_host *mmc, struct mmc_request *mrq) ++{ ++ struct bcm2835_host *host; ++ unsigned long flags; ++ u32 edm, fsm; ++ ++ host = mmc_priv(mmc); ++ ++ if (host->debug) { ++ struct mmc_command *cmd = mrq->cmd; ++ BUG_ON(!cmd); ++ if (cmd->data) ++ pr_info("%s: cmd %d 0x%x (flags 0x%x) - %s %d*%d\n", ++ mmc_hostname(mmc), ++ cmd->opcode, cmd->arg, cmd->flags, ++ (cmd->data->flags & MMC_DATA_READ) ? ++ "read" : "write", cmd->data->blocks, ++ cmd->data->blksz); ++ else ++ pr_info("%s: cmd %d 0x%x (flags 0x%x)\n", ++ mmc_hostname(mmc), ++ cmd->opcode, cmd->arg, cmd->flags); ++ } ++ ++ /* Reset the error statuses in case this is a retry */ ++ if (mrq->sbc) ++ mrq->sbc->error = 0; ++ if (mrq->cmd) ++ mrq->cmd->error = 0; ++ if (mrq->data) ++ mrq->data->error = 0; ++ if (mrq->stop) ++ mrq->stop->error = 0; ++ ++ if (mrq->data && !is_power_of_2(mrq->data->blksz)) { ++ pr_err("%s: unsupported block size (%d bytes)\n", ++ mmc_hostname(mmc), mrq->data->blksz); ++ mrq->cmd->error = -EINVAL; ++ mmc_request_done(mmc, mrq); ++ return; ++ } ++ ++ if (host->use_dma && mrq->data && ++ (mrq->data->blocks > host->pio_limit)) ++ bcm2835_sdhost_prepare_dma(host, mrq->data); ++ ++ if (host->reset_clock) ++ bcm2835_sdhost_set_clock(host, host->clock); ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ WARN_ON(host->mrq != NULL); ++ host->mrq = mrq; ++ ++ edm = bcm2835_sdhost_read(host, SDEDM); ++ fsm = edm & SDEDM_FSM_MASK; ++ ++ log_event("REQ<", (u32)mrq, edm); ++ if ((fsm != SDEDM_FSM_IDENTMODE) && ++ (fsm != SDEDM_FSM_DATAMODE)) { ++ log_event("REQ!", (u32)mrq, edm); ++ if (host->debug) { ++ pr_warn("%s: previous command (%d) not complete (EDM %x)\n", ++ mmc_hostname(host->mmc), ++ bcm2835_sdhost_read(host, SDCMD) & SDCMD_CMD_MASK, ++ edm); ++ log_dump(); ++ bcm2835_sdhost_dumpregs(host); ++ } ++ mrq->cmd->error = -EILSEQ; ++ tasklet_schedule(&host->finish_tasklet); ++ mmiowb(); ++ spin_unlock_irqrestore(&host->lock, flags); ++ return; ++ } ++ ++ host->use_sbc = !!mrq->sbc && ++ (host->mrq->data->flags & USE_CMD23_FLAGS); ++ if (host->use_sbc) { ++ if (bcm2835_sdhost_send_command(host, mrq->sbc)) { ++ if (!host->use_busy) ++ bcm2835_sdhost_finish_command(host, &flags); ++ } ++ } else if (bcm2835_sdhost_send_command(host, mrq->cmd)) { ++ if (host->data && host->dma_desc) ++ /* DMA transfer starts now, PIO starts after irq */ ++ bcm2835_sdhost_start_dma(host); ++ ++ if (!host->use_busy) ++ bcm2835_sdhost_finish_command(host, &flags); ++ } ++ ++ log_event("CMD ", (u32)mrq->cmd->opcode, ++ mrq->data ? (u32)mrq->data->blksz : 0); ++ mmiowb(); ++ ++ log_event("REQ>", (u32)mrq, 0); ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_sdhost_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) ++{ ++ ++ struct bcm2835_host *host = mmc_priv(mmc); ++ unsigned long flags; ++ ++ if (host->debug) ++ pr_info("%s: ios clock %d, pwr %d, bus_width %d, " ++ "timing %d, vdd %d, drv_type %d\n", ++ mmc_hostname(mmc), ++ ios->clock, ios->power_mode, ios->bus_width, ++ ios->timing, ios->signal_voltage, ios->drv_type); ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ log_event("IOS<", ios->clock, 0); ++ ++ /* set bus width */ ++ host->hcfg &= ~SDHCFG_WIDE_EXT_BUS; ++ if (ios->bus_width == MMC_BUS_WIDTH_4) ++ host->hcfg |= SDHCFG_WIDE_EXT_BUS; ++ ++ host->hcfg |= SDHCFG_WIDE_INT_BUS; ++ ++ /* Disable clever clock switching, to cope with fast core clocks */ ++ host->hcfg |= SDHCFG_SLOW_CARD; ++ ++ bcm2835_sdhost_write(host, host->hcfg, SDHCFG); ++ ++ mmiowb(); ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++ ++ if (!ios->clock || ios->clock != host->clock) ++ bcm2835_sdhost_set_clock(host, ios->clock); ++} ++ ++static struct mmc_host_ops bcm2835_sdhost_ops = { ++ .request = bcm2835_sdhost_request, ++ .set_ios = bcm2835_sdhost_set_ios, ++ .hw_reset = bcm2835_sdhost_reset, ++}; ++ ++static void bcm2835_sdhost_cmd_wait_work(struct work_struct *work) ++{ ++ struct bcm2835_host *host; ++ unsigned long flags; ++ ++ host = container_of(work, struct bcm2835_host, cmd_wait_wq); ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ log_event("CWK<", (u32)host->cmd, (u32)host->mrq); ++ ++ /* ++ * If this tasklet gets rescheduled while running, it will ++ * be run again afterwards but without any active request. ++ */ ++ if (!host->mrq) { ++ spin_unlock_irqrestore(&host->lock, flags); ++ return; ++ } ++ ++ bcm2835_sdhost_finish_command(host, &flags); ++ ++ mmiowb(); ++ ++ log_event("CWK>", (u32)host->cmd, 0); ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static void bcm2835_sdhost_tasklet_finish(unsigned long param) ++{ ++ struct bcm2835_host *host; ++ unsigned long flags; ++ struct mmc_request *mrq; ++ struct dma_chan *terminate_chan = NULL; ++ ++ host = (struct bcm2835_host *)param; ++ ++ spin_lock_irqsave(&host->lock, flags); ++ ++ log_event("TSK<", (u32)host->mrq, 0); ++ /* ++ * If this tasklet gets rescheduled while running, it will ++ * be run again afterwards but without any active request. ++ */ ++ if (!host->mrq) { ++ spin_unlock_irqrestore(&host->lock, flags); ++ return; ++ } ++ ++ del_timer(&host->timer); ++ ++ mrq = host->mrq; ++ ++ /* Drop the overclock after any data corruption, or after any ++ * error while overclocked. Ignore errors for status commands, ++ * as they are likely when a card is ejected. */ ++ if (host->overclock) { ++ if ((mrq->cmd && mrq->cmd->error && ++ (mrq->cmd->opcode != MMC_SEND_STATUS)) || ++ (mrq->data && mrq->data->error) || ++ (mrq->stop && mrq->stop->error) || ++ (mrq->sbc && mrq->sbc->error)) { ++ host->overclock_50--; ++ pr_warn("%s: reducing overclock due to errors\n", ++ mmc_hostname(host->mmc)); ++ host->reset_clock = 1; ++ mrq->cmd->error = -ETIMEDOUT; ++ mrq->cmd->retries = 1; ++ } ++ } ++ ++ host->mrq = NULL; ++ host->cmd = NULL; ++ host->data = NULL; ++ ++ mmiowb(); ++ ++ host->dma_desc = NULL; ++ terminate_chan = host->dma_chan; ++ host->dma_chan = NULL; ++ ++ spin_unlock_irqrestore(&host->lock, flags); ++ ++ if (terminate_chan) ++ { ++ int err = dmaengine_terminate_all(terminate_chan); ++ if (err) ++ pr_err("%s: failed to terminate DMA (%d)\n", ++ mmc_hostname(host->mmc), err); ++ } ++ ++ /* The SDHOST block doesn't report any errors for a disconnected ++ interface. All cards and SDIO devices should report some supported ++ voltage range, so a zero response to SEND_OP_COND, IO_SEND_OP_COND ++ or APP_SEND_OP_COND can be treated as an error. */ ++ if (((mrq->cmd->opcode == MMC_SEND_OP_COND) || ++ (mrq->cmd->opcode == SD_IO_SEND_OP_COND) || ++ (mrq->cmd->opcode == SD_APP_OP_COND)) && ++ (mrq->cmd->error == 0) && ++ (mrq->cmd->resp[0] == 0)) { ++ mrq->cmd->error = -ETIMEDOUT; ++ if (host->debug) ++ pr_info("%s: faking timeout due to zero OCR\n", ++ mmc_hostname(host->mmc)); ++ } ++ ++ mmc_request_done(host->mmc, mrq); ++ log_event("TSK>", (u32)mrq, 0); ++} ++ ++int bcm2835_sdhost_add_host(struct bcm2835_host *host) ++{ ++ struct mmc_host *mmc; ++ struct dma_slave_config cfg; ++ char pio_limit_string[20]; ++ int ret; ++ ++ mmc = host->mmc; ++ ++ mmc->f_max = host->max_clk; ++ mmc->f_min = host->max_clk / SDCDIV_MAX_CDIV; ++ ++ mmc->max_busy_timeout = (~(unsigned int)0)/(mmc->f_max/1000); ++ ++ pr_debug("f_max %d, f_min %d, max_busy_timeout %d\n", ++ mmc->f_max, mmc->f_min, mmc->max_busy_timeout); ++ ++ /* host controller capabilities */ ++ mmc->caps |= ++ MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED | ++ MMC_CAP_NEEDS_POLL | MMC_CAP_HW_RESET | MMC_CAP_ERASE | ++ ((ALLOW_CMD23_READ|ALLOW_CMD23_WRITE) * MMC_CAP_CMD23); ++ ++ spin_lock_init(&host->lock); ++ ++ if (host->allow_dma) { ++ if (IS_ERR_OR_NULL(host->dma_chan_rxtx)) { ++ pr_err("%s: unable to initialise DMA channel. " ++ "Falling back to PIO\n", ++ mmc_hostname(mmc)); ++ host->use_dma = false; ++ } else { ++ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ cfg.slave_id = 13; /* DREQ channel */ ++ ++ /* Validate the slave configurations */ ++ ++ cfg.direction = DMA_MEM_TO_DEV; ++ cfg.src_addr = 0; ++ cfg.dst_addr = host->bus_addr + SDDATA; ++ ++ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); ++ ++ if (ret == 0) { ++ host->dma_cfg_tx = cfg; ++ ++ cfg.direction = DMA_DEV_TO_MEM; ++ cfg.src_addr = host->bus_addr + SDDATA; ++ cfg.dst_addr = 0; ++ ++ ret = dmaengine_slave_config(host->dma_chan_rxtx, &cfg); ++ } ++ ++ if (ret == 0) { ++ host->dma_cfg_rx = cfg; ++ ++ host->use_dma = true; ++ } else { ++ pr_err("%s: unable to configure DMA channel. " ++ "Falling back to PIO\n", ++ mmc_hostname(mmc)); ++ dma_release_channel(host->dma_chan_rxtx); ++ host->dma_chan_rxtx = NULL; ++ host->use_dma = false; ++ } ++ } ++ } else { ++ host->use_dma = false; ++ } ++ ++ mmc->max_segs = 128; ++ mmc->max_req_size = 524288; ++ mmc->max_seg_size = mmc->max_req_size; ++ mmc->max_blk_size = 512; ++ mmc->max_blk_count = 65535; ++ ++ /* report supported voltage ranges */ ++ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; ++ ++ tasklet_init(&host->finish_tasklet, ++ bcm2835_sdhost_tasklet_finish, (unsigned long)host); ++ ++ INIT_WORK(&host->cmd_wait_wq, bcm2835_sdhost_cmd_wait_work); ++ ++ setup_timer(&host->timer, bcm2835_sdhost_timeout, ++ (unsigned long)host); ++ ++ bcm2835_sdhost_init(host, 0); ++ ++ ret = request_irq(host->irq, bcm2835_sdhost_irq, 0 /*IRQF_SHARED*/, ++ mmc_hostname(mmc), host); ++ if (ret) { ++ pr_err("%s: failed to request IRQ %d: %d\n", ++ mmc_hostname(mmc), host->irq, ret); ++ goto untasklet; ++ } ++ ++ mmiowb(); ++ mmc_add_host(mmc); ++ ++ pio_limit_string[0] = '\0'; ++ if (host->use_dma && (host->pio_limit > 0)) ++ sprintf(pio_limit_string, " (>%d)", host->pio_limit); ++ pr_info("%s: %s loaded - DMA %s%s\n", ++ mmc_hostname(mmc), DRIVER_NAME, ++ host->use_dma ? "enabled" : "disabled", ++ pio_limit_string); ++ ++ return 0; ++ ++untasklet: ++ tasklet_kill(&host->finish_tasklet); ++ ++ return ret; ++} ++ ++static int bcm2835_sdhost_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct device_node *node = dev->of_node; ++ struct clk *clk; ++ struct resource *iomem; ++ struct bcm2835_host *host; ++ struct mmc_host *mmc; ++ const __be32 *addr; ++ u32 msg[3]; ++ int ret; ++ ++ pr_debug("bcm2835_sdhost_probe\n"); ++ mmc = mmc_alloc_host(sizeof(*host), dev); ++ if (!mmc) ++ return -ENOMEM; ++ ++ mmc->ops = &bcm2835_sdhost_ops; ++ host = mmc_priv(mmc); ++ host->mmc = mmc; ++ host->pio_timeout = msecs_to_jiffies(500); ++ host->pio_limit = 1; ++ host->max_delay = 1; /* Warn if over 1ms */ ++ host->allow_dma = 1; ++ spin_lock_init(&host->lock); ++ ++ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ host->ioaddr = devm_ioremap_resource(dev, iomem); ++ if (IS_ERR(host->ioaddr)) { ++ ret = PTR_ERR(host->ioaddr); ++ goto err; ++ } ++ ++ addr = of_get_address(node, 0, NULL, NULL); ++ if (!addr) { ++ dev_err(dev, "could not get DMA-register address\n"); ++ return -ENODEV; ++ } ++ host->bus_addr = be32_to_cpup(addr); ++ pr_debug(" - ioaddr %lx, iomem->start %lx, bus_addr %lx\n", ++ (unsigned long)host->ioaddr, ++ (unsigned long)iomem->start, ++ (unsigned long)host->bus_addr); ++ ++ if (node) { ++ /* Read any custom properties */ ++ of_property_read_u32(node, ++ "brcm,delay-after-stop", ++ &host->delay_after_stop); ++ of_property_read_u32(node, ++ "brcm,overclock-50", ++ &host->user_overclock_50); ++ of_property_read_u32(node, ++ "brcm,pio-limit", ++ &host->pio_limit); ++ host->allow_dma = ++ !of_property_read_bool(node, "brcm,force-pio"); ++ host->debug = of_property_read_bool(node, "brcm,debug"); ++ } ++ ++ host->dma_chan = NULL; ++ host->dma_desc = NULL; ++ ++ /* Formally recognise the other way of disabling DMA */ ++ if (host->pio_limit == 0x7fffffff) ++ host->allow_dma = false; ++ ++ if (host->allow_dma) { ++ if (node) { ++ host->dma_chan_rxtx = ++ dma_request_slave_channel(dev, "rx-tx"); ++ if (!host->dma_chan_rxtx) ++ host->dma_chan_rxtx = ++ dma_request_slave_channel(dev, "tx"); ++ if (!host->dma_chan_rxtx) ++ host->dma_chan_rxtx = ++ dma_request_slave_channel(dev, "rx"); ++ } else { ++ dma_cap_mask_t mask; ++ ++ dma_cap_zero(mask); ++ /* we don't care about the channel, any would work */ ++ dma_cap_set(DMA_SLAVE, mask); ++ host->dma_chan_rxtx = ++ dma_request_channel(mask, NULL, NULL); ++ } ++ } ++ ++ clk = devm_clk_get(dev, NULL); ++ if (IS_ERR(clk)) { ++ ret = PTR_ERR(clk); ++ if (ret == -EPROBE_DEFER) ++ dev_info(dev, "could not get clk, deferring probe\n"); ++ else ++ dev_err(dev, "could not get clk\n"); ++ goto err; ++ } ++ ++ host->max_clk = clk_get_rate(clk); ++ ++ host->irq = platform_get_irq(pdev, 0); ++ if (host->irq <= 0) { ++ dev_err(dev, "get IRQ failed\n"); ++ ret = -EINVAL; ++ goto err; ++ } ++ ++ pr_debug(" - max_clk %lx, irq %d\n", ++ (unsigned long)host->max_clk, ++ (int)host->irq); ++ ++ log_init(dev, iomem->start - host->bus_addr); ++ ++ if (node) ++ mmc_of_parse(mmc); ++ else ++ mmc->caps |= MMC_CAP_4_BIT_DATA; ++ ++ msg[0] = 0; ++ msg[1] = ~0; ++ msg[2] = ~0; ++ ++ rpi_firmware_property(rpi_firmware_get(NULL), ++ RPI_FIRMWARE_SET_SDHOST_CLOCK, ++ &msg, sizeof(msg)); ++ ++ host->firmware_sets_cdiv = (msg[1] != ~0); ++ ++ ret = bcm2835_sdhost_add_host(host); ++ if (ret) ++ goto err; ++ ++ platform_set_drvdata(pdev, host); ++ ++ pr_debug("bcm2835_sdhost_probe -> OK\n"); ++ ++ return 0; ++ ++err: ++ pr_debug("bcm2835_sdhost_probe -> err %d\n", ret); ++ mmc_free_host(mmc); ++ ++ return ret; ++} ++ ++static int bcm2835_sdhost_remove(struct platform_device *pdev) ++{ ++ struct bcm2835_host *host = platform_get_drvdata(pdev); ++ ++ pr_debug("bcm2835_sdhost_remove\n"); ++ ++ mmc_remove_host(host->mmc); ++ ++ bcm2835_sdhost_set_power(host, false); ++ ++ free_irq(host->irq, host); ++ ++ del_timer_sync(&host->timer); ++ ++ tasklet_kill(&host->finish_tasklet); ++ ++ mmc_free_host(host->mmc); ++ platform_set_drvdata(pdev, NULL); ++ ++ pr_debug("bcm2835_sdhost_remove - OK\n"); ++ return 0; ++} ++ ++static const struct of_device_id bcm2835_sdhost_match[] = { ++ { .compatible = "brcm,bcm2835-sdhost" }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, bcm2835_sdhost_match); ++ ++static struct platform_driver bcm2835_sdhost_driver = { ++ .probe = bcm2835_sdhost_probe, ++ .remove = bcm2835_sdhost_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2835_sdhost_match, ++ }, ++}; ++module_platform_driver(bcm2835_sdhost_driver); ++ ++MODULE_ALIAS("platform:sdhost-bcm2835"); ++MODULE_DESCRIPTION("BCM2835 SDHost driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_AUTHOR("Phil Elwell"); diff --git a/target/linux/brcm2708/patches-4.9/950-0036-mmc-Add-MMC_QUIRK_ERASE_BROKEN-for-some-cards.patch b/target/linux/brcm2708/patches-4.9/950-0036-mmc-Add-MMC_QUIRK_ERASE_BROKEN-for-some-cards.patch new file mode 100644 index 000000000000..d84a0fe892de --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0036-mmc-Add-MMC_QUIRK_ERASE_BROKEN-for-some-cards.patch @@ -0,0 +1,132 @@ +From 6d11059a087b8101cf34a09a1e3342bb4f1576de Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 11 May 2016 12:50:33 +0100 +Subject: [PATCH] mmc: Add MMC_QUIRK_ERASE_BROKEN for some cards + +Some SD cards have been found that corrupt data when small blocks +are erased. Add a quirk to indicate that ERASE should not be used, +and set it for cards of that type. + +Signed-off-by: Phil Elwell + +mmc: Apply QUIRK_BROKEN_ERASE to other capacities + +Signed-off-by: Phil Elwell + +mmc: Add card_quirks module parameter, log quirks + +Use mmc_block.card_quirks to override the quirks for all SD or MMC +cards. The value is a bitfield using the bit positions defined in +include/linux/mmc/card.h. If the module parameter is placed in the +kernel command line (or bootargs) stored on the card then, assuming the +device only has one SD card interface, the override effectively becomes +card-specific. + +Signed-off-by: Phil Elwell +--- + drivers/mmc/card/block.c | 39 ++++++++++++++++++++++++++++++++++++--- + drivers/mmc/core/core.c | 3 ++- + include/linux/mmc/card.h | 3 +++ + 3 files changed, 41 insertions(+), 4 deletions(-) + +--- a/drivers/mmc/card/block.c ++++ b/drivers/mmc/card/block.c +@@ -135,6 +135,13 @@ enum { + module_param(perdev_minors, int, 0444); + MODULE_PARM_DESC(perdev_minors, "Minors numbers to allocate per device"); + ++/* ++ * Allow quirks to be overridden for the current card ++ */ ++static char *card_quirks; ++module_param(card_quirks, charp, 0644); ++MODULE_PARM_DESC(card_quirks, "Force the use of the indicated quirks (a bitfield)"); ++ + static inline int mmc_blk_part_switch(struct mmc_card *card, + struct mmc_blk_data *md); + static int get_card_status(struct mmc_card *card, u32 *status, int retries); +@@ -2573,6 +2580,17 @@ static const struct mmc_fixup blk_fixups + MMC_FIXUP("V10016", CID_MANFID_KINGSTON, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_TRIM_BROKEN), + ++ /* ++ * On some Kingston SD cards, multiple erases of less than 64 ++ * sectors can cause corruption. ++ */ ++ MMC_FIXUP("SD16G", 0x41, 0x3432, add_quirk_mmc, ++ MMC_QUIRK_ERASE_BROKEN), ++ MMC_FIXUP("SD32G", 0x41, 0x3432, add_quirk_mmc, ++ MMC_QUIRK_ERASE_BROKEN), ++ MMC_FIXUP("SD64G", 0x41, 0x3432, add_quirk_mmc, ++ MMC_QUIRK_ERASE_BROKEN), ++ + END_FIXUP + }; + +@@ -2580,6 +2598,7 @@ static int mmc_blk_probe(struct mmc_card + { + struct mmc_blk_data *md, *part_md; + char cap_str[10]; ++ char quirk_str[24]; + + /* + * Check that the card supports the command class(es) we need. +@@ -2587,7 +2606,16 @@ static int mmc_blk_probe(struct mmc_card + if (!(card->csd.cmdclass & CCC_BLOCK_READ)) + return -ENODEV; + +- mmc_fixup_device(card, blk_fixups); ++ if (card_quirks) { ++ unsigned long quirks; ++ if (kstrtoul(card_quirks, 0, &quirks) == 0) ++ card->quirks = (unsigned int)quirks; ++ else ++ pr_err("mmc_block: Invalid card_quirks parameter '%s'\n", ++ card_quirks); ++ } ++ else ++ mmc_fixup_device(card, blk_fixups); + + md = mmc_blk_alloc(card); + if (IS_ERR(md)) +@@ -2595,9 +2623,14 @@ static int mmc_blk_probe(struct mmc_card + + string_get_size((u64)get_capacity(md->disk), 512, STRING_UNITS_2, + cap_str, sizeof(cap_str)); +- pr_info("%s: %s %s %s %s\n", ++ if (card->quirks) ++ snprintf(quirk_str, sizeof(quirk_str), ++ " (quirks 0x%08x)", card->quirks); ++ else ++ quirk_str[0] = '\0'; ++ pr_info("%s: %s %s %s%s%s\n", + md->disk->disk_name, mmc_card_id(card), mmc_card_name(card), +- cap_str, md->read_only ? "(ro)" : ""); ++ cap_str, md->read_only ? " (ro)" : "", quirk_str); + + if (mmc_blk_alloc_parts(card, md)) + goto out; +--- a/drivers/mmc/core/core.c ++++ b/drivers/mmc/core/core.c +@@ -2409,7 +2409,8 @@ EXPORT_SYMBOL(mmc_erase); + int mmc_can_erase(struct mmc_card *card) + { + if ((card->host->caps & MMC_CAP_ERASE) && +- (card->csd.cmdclass & CCC_ERASE) && card->erase_size) ++ (card->csd.cmdclass & CCC_ERASE) && card->erase_size && ++ !(card->quirks & MMC_QUIRK_ERASE_BROKEN)) + return 1; + return 0; + } +--- a/include/linux/mmc/card.h ++++ b/include/linux/mmc/card.h +@@ -283,6 +283,9 @@ struct mmc_card { + #define MMC_QUIRK_BROKEN_HPI (1<<13) /* Disable broken HPI support */ + + ++#define MMC_QUIRK_ERASE_BROKEN (1<<31) /* Skip erase */ ++ ++ + unsigned int erase_size; /* erase size in sectors */ + unsigned int erase_shift; /* if erase unit is power 2 */ + unsigned int pref_erase; /* in sectors */ diff --git a/target/linux/brcm2708/patches-4.9/950-0037-cma-Add-vc_cma-driver-to-enable-use-of-CMA.patch b/target/linux/brcm2708/patches-4.9/950-0037-cma-Add-vc_cma-driver-to-enable-use-of-CMA.patch new file mode 100644 index 000000000000..50bad76c5171 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0037-cma-Add-vc_cma-driver-to-enable-use-of-CMA.patch @@ -0,0 +1,1319 @@ +From 4d96064d4c95d73d22563cea403eccd72e7b0da0 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Wed, 3 Jul 2013 00:31:47 +0100 +Subject: [PATCH] cma: Add vc_cma driver to enable use of CMA +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: popcornmix + +vc_cma: Make the vc_cma area the default contiguous DMA area + +vc_cma: Provide empty functions when module is not built + +Providing empty functions saves the users from guarding the +function call with an #if clause. +Move __init markings from prototypes to functions. + +Signed-off-by: Noralf Trønnes +--- + drivers/char/Kconfig | 2 + + drivers/char/Makefile | 1 + + drivers/char/broadcom/Kconfig | 15 + + drivers/char/broadcom/Makefile | 1 + + drivers/char/broadcom/vc_cma/Makefile | 7 + + drivers/char/broadcom/vc_cma/vc_cma.c | 1193 +++++++++++++++++++++++++++++++++ + include/linux/broadcom/vc_cma.h | 36 + + 7 files changed, 1255 insertions(+) + create mode 100644 drivers/char/broadcom/Kconfig + create mode 100644 drivers/char/broadcom/Makefile + create mode 100644 drivers/char/broadcom/vc_cma/Makefile + create mode 100644 drivers/char/broadcom/vc_cma/vc_cma.c + create mode 100644 include/linux/broadcom/vc_cma.h + +--- a/drivers/char/Kconfig ++++ b/drivers/char/Kconfig +@@ -4,6 +4,8 @@ + + menu "Character devices" + ++source "drivers/char/broadcom/Kconfig" ++ + source "drivers/tty/Kconfig" + + config DEVMEM +--- a/drivers/char/Makefile ++++ b/drivers/char/Makefile +@@ -60,3 +60,4 @@ js-rtc-y = rtc.o + obj-$(CONFIG_TILE_SROM) += tile-srom.o + obj-$(CONFIG_XILLYBUS) += xillybus/ + obj-$(CONFIG_POWERNV_OP_PANEL) += powernv-op-panel.o ++obj-$(CONFIG_BRCM_CHAR_DRIVERS) += broadcom/ +--- /dev/null ++++ b/drivers/char/broadcom/Kconfig +@@ -0,0 +1,15 @@ ++# ++# Broadcom char driver config ++# ++ ++menuconfig BRCM_CHAR_DRIVERS ++ bool "Broadcom Char Drivers" ++ help ++ Broadcom's char drivers ++ ++config BCM_VC_CMA ++ bool "Videocore CMA" ++ depends on CMA && BRCM_CHAR_DRIVERS && BCM2708_VCHIQ ++ default n ++ help ++ Helper for videocore CMA access. +--- /dev/null ++++ b/drivers/char/broadcom/Makefile +@@ -0,0 +1 @@ ++obj-$(CONFIG_BCM_VC_CMA) += vc_cma/ +--- /dev/null ++++ b/drivers/char/broadcom/vc_cma/Makefile +@@ -0,0 +1,7 @@ ++ccflags-$(CONFIG_BCM_VC_CMA) += -Wall -Wstrict-prototypes -Wno-trigraphs -Werror ++ccflags-$(CONFIG_BCM_VC_CMA) += -Iinclude/linux/broadcom -Idrivers/staging/vc04_services -Idrivers/staging/vc04_services/interface/vchi -Idrivers/staging/vc04_services/interface/vchiq_arm ++ccflags-$(CONFIG_BCM_VC_CMA) += -D__KERNEL__ -D__linux__ ++ ++obj-$(CONFIG_BCM_VC_CMA) += vc-cma.o ++ ++vc-cma-objs := vc_cma.o +--- /dev/null ++++ b/drivers/char/broadcom/vc_cma/vc_cma.c +@@ -0,0 +1,1193 @@ ++/** ++ * Copyright (c) 2010-2012 Broadcom. All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") version 2, as published by the Free ++ * Software Foundation. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "vc_cma.h" ++ ++#include "vchiq_util.h" ++#include "vchiq_connected.h" ++//#include "debug_sym.h" ++//#include "vc_mem.h" ++ ++#define DRIVER_NAME "vc-cma" ++ ++#define LOG_DBG(fmt, ...) \ ++ if (vc_cma_debug) \ ++ printk(KERN_INFO fmt "\n", ##__VA_ARGS__) ++#define LOG_INFO(fmt, ...) \ ++ printk(KERN_INFO fmt "\n", ##__VA_ARGS__) ++#define LOG_ERR(fmt, ...) \ ++ printk(KERN_ERR fmt "\n", ##__VA_ARGS__) ++ ++#define VC_CMA_FOURCC VCHIQ_MAKE_FOURCC('C', 'M', 'A', ' ') ++#define VC_CMA_VERSION 2 ++ ++#define VC_CMA_CHUNK_ORDER 6 /* 256K */ ++#define VC_CMA_CHUNK_SIZE (4096 << VC_CMA_CHUNK_ORDER) ++#define VC_CMA_MAX_PARAMS_PER_MSG \ ++ ((VCHIQ_MAX_MSG_SIZE - sizeof(unsigned short))/sizeof(unsigned short)) ++#define VC_CMA_RESERVE_COUNT_MAX 16 ++ ++#define PAGES_PER_CHUNK (VC_CMA_CHUNK_SIZE / PAGE_SIZE) ++ ++#define VCADDR_TO_PHYSADDR(vcaddr) (mm_vc_mem_phys_addr + vcaddr) ++ ++#define loud_error(...) \ ++ LOG_ERR("===== " __VA_ARGS__) ++ ++enum { ++ VC_CMA_MSG_QUIT, ++ VC_CMA_MSG_OPEN, ++ VC_CMA_MSG_TICK, ++ VC_CMA_MSG_ALLOC, /* chunk count */ ++ VC_CMA_MSG_FREE, /* chunk, chunk, ... */ ++ VC_CMA_MSG_ALLOCATED, /* chunk, chunk, ... */ ++ VC_CMA_MSG_REQUEST_ALLOC, /* chunk count */ ++ VC_CMA_MSG_REQUEST_FREE, /* chunk count */ ++ VC_CMA_MSG_RESERVE, /* bytes lo, bytes hi */ ++ VC_CMA_MSG_UPDATE_RESERVE, ++ VC_CMA_MSG_MAX ++}; ++ ++struct cma_msg { ++ unsigned short type; ++ unsigned short params[VC_CMA_MAX_PARAMS_PER_MSG]; ++}; ++ ++struct vc_cma_reserve_user { ++ unsigned int pid; ++ unsigned int reserve; ++}; ++ ++/* Device (/dev) related variables */ ++static dev_t vc_cma_devnum; ++static struct class *vc_cma_class; ++static struct cdev vc_cma_cdev; ++static int vc_cma_inited; ++static int vc_cma_debug; ++ ++/* Proc entry */ ++static struct proc_dir_entry *vc_cma_proc_entry; ++ ++phys_addr_t vc_cma_base; ++struct page *vc_cma_base_page; ++unsigned int vc_cma_size; ++EXPORT_SYMBOL(vc_cma_size); ++unsigned int vc_cma_initial; ++unsigned int vc_cma_chunks; ++unsigned int vc_cma_chunks_used; ++unsigned int vc_cma_chunks_reserved; ++ ++ ++void *vc_cma_dma_alloc; ++unsigned int vc_cma_dma_size; ++ ++static int in_loud_error; ++ ++unsigned int vc_cma_reserve_total; ++unsigned int vc_cma_reserve_count; ++struct vc_cma_reserve_user vc_cma_reserve_users[VC_CMA_RESERVE_COUNT_MAX]; ++static DEFINE_SEMAPHORE(vc_cma_reserve_mutex); ++static DEFINE_SEMAPHORE(vc_cma_worker_queue_push_mutex); ++ ++static u64 vc_cma_dma_mask = DMA_BIT_MASK(32); ++static struct platform_device vc_cma_device = { ++ .name = "vc-cma", ++ .id = 0, ++ .dev = { ++ .dma_mask = &vc_cma_dma_mask, ++ .coherent_dma_mask = DMA_BIT_MASK(32), ++ }, ++}; ++ ++static VCHIQ_INSTANCE_T cma_instance; ++static VCHIQ_SERVICE_HANDLE_T cma_service; ++static VCHIU_QUEUE_T cma_msg_queue; ++static struct task_struct *cma_worker; ++ ++static int vc_cma_set_reserve(unsigned int reserve, unsigned int pid); ++static int vc_cma_alloc_chunks(int num_chunks, struct cma_msg *reply); ++static VCHIQ_STATUS_T cma_service_callback(VCHIQ_REASON_T reason, ++ VCHIQ_HEADER_T * header, ++ VCHIQ_SERVICE_HANDLE_T service, ++ void *bulk_userdata); ++static void send_vc_msg(unsigned short type, ++ unsigned short param1, unsigned short param2); ++static bool send_worker_msg(VCHIQ_HEADER_T * msg); ++ ++static int early_vc_cma_mem(char *p) ++{ ++ unsigned int new_size; ++ printk(KERN_NOTICE "early_vc_cma_mem(%s)", p); ++ vc_cma_size = memparse(p, &p); ++ vc_cma_initial = vc_cma_size; ++ if (*p == '/') ++ vc_cma_size = memparse(p + 1, &p); ++ if (*p == '@') ++ vc_cma_base = memparse(p + 1, &p); ++ ++ new_size = (vc_cma_size - ((-vc_cma_base) & (VC_CMA_CHUNK_SIZE - 1))) ++ & ~(VC_CMA_CHUNK_SIZE - 1); ++ if (new_size > vc_cma_size) ++ vc_cma_size = 0; ++ vc_cma_initial = (vc_cma_initial + VC_CMA_CHUNK_SIZE - 1) ++ & ~(VC_CMA_CHUNK_SIZE - 1); ++ if (vc_cma_initial > vc_cma_size) ++ vc_cma_initial = vc_cma_size; ++ vc_cma_base = (vc_cma_base + VC_CMA_CHUNK_SIZE - 1) ++ & ~(VC_CMA_CHUNK_SIZE - 1); ++ ++ printk(KERN_NOTICE " -> initial %x, size %x, base %x", vc_cma_initial, ++ vc_cma_size, (unsigned int)vc_cma_base); ++ ++ return 0; ++} ++ ++early_param("vc-cma-mem", early_vc_cma_mem); ++ ++void __init vc_cma_early_init(void) ++{ ++ LOG_DBG("vc_cma_early_init - vc_cma_chunks = %d", vc_cma_chunks); ++ if (vc_cma_size) { ++ int rc = platform_device_register(&vc_cma_device); ++ LOG_DBG("platform_device_register -> %d", rc); ++ } ++} ++ ++void __init vc_cma_reserve(void) ++{ ++ /* if vc_cma_size is set, then declare vc CMA area of the same ++ * size from the end of memory ++ */ ++ if (vc_cma_size) { ++ if (dma_declare_contiguous(&vc_cma_device.dev, vc_cma_size, ++ vc_cma_base, 0) == 0) { ++ if (!dev_get_cma_area(NULL)) { ++ /* There is no default CMA area - make this ++ the default */ ++ struct cma *vc_cma_area = dev_get_cma_area( ++ &vc_cma_device.dev); ++ dma_contiguous_set_default(vc_cma_area); ++ LOG_INFO("vc_cma_reserve - using vc_cma as " ++ "the default contiguous DMA area"); ++ } ++ } else { ++ LOG_ERR("vc_cma: dma_declare_contiguous(%x,%x) failed", ++ vc_cma_size, (unsigned int)vc_cma_base); ++ vc_cma_size = 0; ++ } ++ } ++ vc_cma_chunks = vc_cma_size / VC_CMA_CHUNK_SIZE; ++} ++ ++/**************************************************************************** ++* ++* vc_cma_open ++* ++***************************************************************************/ ++ ++static int vc_cma_open(struct inode *inode, struct file *file) ++{ ++ (void)inode; ++ (void)file; ++ ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* vc_cma_release ++* ++***************************************************************************/ ++ ++static int vc_cma_release(struct inode *inode, struct file *file) ++{ ++ (void)inode; ++ (void)file; ++ ++ vc_cma_set_reserve(0, current->tgid); ++ ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* vc_cma_ioctl ++* ++***************************************************************************/ ++ ++static long vc_cma_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ int rc = 0; ++ ++ (void)cmd; ++ (void)arg; ++ ++ switch (cmd) { ++ case VC_CMA_IOC_RESERVE: ++ rc = vc_cma_set_reserve((unsigned int)arg, current->tgid); ++ if (rc >= 0) ++ rc = 0; ++ break; ++ default: ++ LOG_ERR("vc-cma: Unknown ioctl %x", cmd); ++ return -ENOTTY; ++ } ++ ++ return rc; ++} ++ ++/**************************************************************************** ++* ++* File Operations for the driver. ++* ++***************************************************************************/ ++ ++static const struct file_operations vc_cma_fops = { ++ .owner = THIS_MODULE, ++ .open = vc_cma_open, ++ .release = vc_cma_release, ++ .unlocked_ioctl = vc_cma_ioctl, ++}; ++ ++/**************************************************************************** ++* ++* vc_cma_proc_open ++* ++***************************************************************************/ ++ ++static int vc_cma_show_info(struct seq_file *m, void *v) ++{ ++ int i; ++ ++ seq_printf(m, "Videocore CMA:\n"); ++ seq_printf(m, " Base : %08x\n", (unsigned int)vc_cma_base); ++ seq_printf(m, " Length : %08x\n", vc_cma_size); ++ seq_printf(m, " Initial : %08x\n", vc_cma_initial); ++ seq_printf(m, " Chunk size : %08x\n", VC_CMA_CHUNK_SIZE); ++ seq_printf(m, " Chunks : %4d (%d bytes)\n", ++ (int)vc_cma_chunks, ++ (int)(vc_cma_chunks * VC_CMA_CHUNK_SIZE)); ++ seq_printf(m, " Used : %4d (%d bytes)\n", ++ (int)vc_cma_chunks_used, ++ (int)(vc_cma_chunks_used * VC_CMA_CHUNK_SIZE)); ++ seq_printf(m, " Reserved : %4d (%d bytes)\n", ++ (unsigned int)vc_cma_chunks_reserved, ++ (int)(vc_cma_chunks_reserved * VC_CMA_CHUNK_SIZE)); ++ ++ for (i = 0; i < vc_cma_reserve_count; i++) { ++ struct vc_cma_reserve_user *user = &vc_cma_reserve_users[i]; ++ seq_printf(m, " PID %5d: %d bytes\n", user->pid, ++ user->reserve); ++ } ++ seq_printf(m, " dma_alloc : %p (%d pages)\n", ++ vc_cma_dma_alloc ? page_address(vc_cma_dma_alloc) : 0, ++ vc_cma_dma_size); ++ ++ seq_printf(m, "\n"); ++ ++ return 0; ++} ++ ++static int vc_cma_proc_open(struct inode *inode, struct file *file) ++{ ++ return single_open(file, vc_cma_show_info, NULL); ++} ++ ++/**************************************************************************** ++* ++* vc_cma_proc_write ++* ++***************************************************************************/ ++ ++static int vc_cma_proc_write(struct file *file, ++ const char __user *buffer, ++ size_t size, loff_t *ppos) ++{ ++ int rc = -EFAULT; ++ char input_str[20]; ++ ++ memset(input_str, 0, sizeof(input_str)); ++ ++ if (size > sizeof(input_str)) { ++ LOG_ERR("%s: input string length too long", __func__); ++ goto out; ++ } ++ ++ if (copy_from_user(input_str, buffer, size - 1)) { ++ LOG_ERR("%s: failed to get input string", __func__); ++ goto out; ++ } ++#define ALLOC_STR "alloc" ++#define FREE_STR "free" ++#define DEBUG_STR "debug" ++#define RESERVE_STR "reserve" ++#define DMA_ALLOC_STR "dma_alloc" ++#define DMA_FREE_STR "dma_free" ++ if (strncmp(input_str, ALLOC_STR, strlen(ALLOC_STR)) == 0) { ++ int alloc_size; ++ char *p = input_str + strlen(ALLOC_STR); ++ ++ while (*p == ' ') ++ p++; ++ alloc_size = memparse(p, NULL); ++ LOG_INFO("/proc/vc-cma: alloc %d", alloc_size); ++ if (alloc_size) ++ send_vc_msg(VC_CMA_MSG_REQUEST_FREE, ++ alloc_size / VC_CMA_CHUNK_SIZE, 0); ++ else ++ LOG_ERR("invalid size '%s'", p); ++ rc = size; ++ } else if (strncmp(input_str, FREE_STR, strlen(FREE_STR)) == 0) { ++ int alloc_size; ++ char *p = input_str + strlen(FREE_STR); ++ ++ while (*p == ' ') ++ p++; ++ alloc_size = memparse(p, NULL); ++ LOG_INFO("/proc/vc-cma: free %d", alloc_size); ++ if (alloc_size) ++ send_vc_msg(VC_CMA_MSG_REQUEST_ALLOC, ++ alloc_size / VC_CMA_CHUNK_SIZE, 0); ++ else ++ LOG_ERR("invalid size '%s'", p); ++ rc = size; ++ } else if (strncmp(input_str, DEBUG_STR, strlen(DEBUG_STR)) == 0) { ++ char *p = input_str + strlen(DEBUG_STR); ++ while (*p == ' ') ++ p++; ++ if ((strcmp(p, "on") == 0) || (strcmp(p, "1") == 0)) ++ vc_cma_debug = 1; ++ else if ((strcmp(p, "off") == 0) || (strcmp(p, "0") == 0)) ++ vc_cma_debug = 0; ++ LOG_INFO("/proc/vc-cma: debug %s", vc_cma_debug ? "on" : "off"); ++ rc = size; ++ } else if (strncmp(input_str, RESERVE_STR, strlen(RESERVE_STR)) == 0) { ++ int alloc_size; ++ int reserved; ++ char *p = input_str + strlen(RESERVE_STR); ++ while (*p == ' ') ++ p++; ++ alloc_size = memparse(p, NULL); ++ ++ reserved = vc_cma_set_reserve(alloc_size, current->tgid); ++ rc = (reserved >= 0) ? size : reserved; ++ } else if (strncmp(input_str, DMA_ALLOC_STR, strlen(DMA_ALLOC_STR)) == 0) { ++ int alloc_size; ++ char *p = input_str + strlen(DMA_ALLOC_STR); ++ while (*p == ' ') ++ p++; ++ alloc_size = memparse(p, NULL); ++ ++ if (vc_cma_dma_alloc) { ++ dma_release_from_contiguous(NULL, vc_cma_dma_alloc, ++ vc_cma_dma_size); ++ vc_cma_dma_alloc = NULL; ++ vc_cma_dma_size = 0; ++ } ++ vc_cma_dma_alloc = dma_alloc_from_contiguous(NULL, alloc_size, 0); ++ vc_cma_dma_size = (vc_cma_dma_alloc ? alloc_size : 0); ++ if (vc_cma_dma_alloc) ++ LOG_INFO("dma_alloc(%d pages) -> %p", alloc_size, page_address(vc_cma_dma_alloc)); ++ else ++ LOG_ERR("dma_alloc(%d pages) failed", alloc_size); ++ rc = size; ++ } else if (strncmp(input_str, DMA_FREE_STR, strlen(DMA_FREE_STR)) == 0) { ++ if (vc_cma_dma_alloc) { ++ dma_release_from_contiguous(NULL, vc_cma_dma_alloc, ++ vc_cma_dma_size); ++ vc_cma_dma_alloc = NULL; ++ vc_cma_dma_size = 0; ++ } ++ rc = size; ++ } ++ ++out: ++ return rc; ++} ++ ++/**************************************************************************** ++* ++* File Operations for /proc interface. ++* ++***************************************************************************/ ++ ++static const struct file_operations vc_cma_proc_fops = { ++ .open = vc_cma_proc_open, ++ .read = seq_read, ++ .write = vc_cma_proc_write, ++ .llseek = seq_lseek, ++ .release = single_release ++}; ++ ++static int vc_cma_set_reserve(unsigned int reserve, unsigned int pid) ++{ ++ struct vc_cma_reserve_user *user = NULL; ++ int delta = 0; ++ int i; ++ ++ if (down_interruptible(&vc_cma_reserve_mutex)) ++ return -ERESTARTSYS; ++ ++ for (i = 0; i < vc_cma_reserve_count; i++) { ++ if (pid == vc_cma_reserve_users[i].pid) { ++ user = &vc_cma_reserve_users[i]; ++ delta = reserve - user->reserve; ++ if (reserve) ++ user->reserve = reserve; ++ else { ++ /* Remove this entry by copying downwards */ ++ while ((i + 1) < vc_cma_reserve_count) { ++ user[0].pid = user[1].pid; ++ user[0].reserve = user[1].reserve; ++ user++; ++ i++; ++ } ++ vc_cma_reserve_count--; ++ user = NULL; ++ } ++ break; ++ } ++ } ++ ++ if (reserve && !user) { ++ if (vc_cma_reserve_count == VC_CMA_RESERVE_COUNT_MAX) { ++ LOG_ERR("vc-cma: Too many reservations - " ++ "increase CMA_RESERVE_COUNT_MAX"); ++ up(&vc_cma_reserve_mutex); ++ return -EBUSY; ++ } ++ user = &vc_cma_reserve_users[vc_cma_reserve_count]; ++ user->pid = pid; ++ user->reserve = reserve; ++ delta = reserve; ++ vc_cma_reserve_count++; ++ } ++ ++ vc_cma_reserve_total += delta; ++ ++ send_vc_msg(VC_CMA_MSG_RESERVE, ++ vc_cma_reserve_total & 0xffff, vc_cma_reserve_total >> 16); ++ ++ send_worker_msg((VCHIQ_HEADER_T *) VC_CMA_MSG_UPDATE_RESERVE); ++ ++ LOG_DBG("/proc/vc-cma: reserve %d (PID %d) - total %u", ++ reserve, pid, vc_cma_reserve_total); ++ ++ up(&vc_cma_reserve_mutex); ++ ++ return vc_cma_reserve_total; ++} ++ ++static VCHIQ_STATUS_T cma_service_callback(VCHIQ_REASON_T reason, ++ VCHIQ_HEADER_T * header, ++ VCHIQ_SERVICE_HANDLE_T service, ++ void *bulk_userdata) ++{ ++ switch (reason) { ++ case VCHIQ_MESSAGE_AVAILABLE: ++ if (!send_worker_msg(header)) ++ return VCHIQ_RETRY; ++ break; ++ case VCHIQ_SERVICE_CLOSED: ++ LOG_DBG("CMA service closed"); ++ break; ++ default: ++ LOG_ERR("Unexpected CMA callback reason %d", reason); ++ break; ++ } ++ return VCHIQ_SUCCESS; ++} ++ ++static void send_vc_msg(unsigned short type, ++ unsigned short param1, unsigned short param2) ++{ ++ unsigned short msg[] = { type, param1, param2 }; ++ VCHIQ_ELEMENT_T elem = { &msg, sizeof(msg) }; ++ VCHIQ_STATUS_T ret; ++ vchiq_use_service(cma_service); ++ ret = vchiq_queue_message(cma_service, &elem, 1); ++ vchiq_release_service(cma_service); ++ if (ret != VCHIQ_SUCCESS) ++ LOG_ERR("vchiq_queue_message returned %x", ret); ++} ++ ++static bool send_worker_msg(VCHIQ_HEADER_T * msg) ++{ ++ if (down_interruptible(&vc_cma_worker_queue_push_mutex)) ++ return false; ++ vchiu_queue_push(&cma_msg_queue, msg); ++ up(&vc_cma_worker_queue_push_mutex); ++ return true; ++} ++ ++static int vc_cma_alloc_chunks(int num_chunks, struct cma_msg *reply) ++{ ++ int i; ++ for (i = 0; i < num_chunks; i++) { ++ struct page *chunk; ++ unsigned int chunk_num; ++ uint8_t *chunk_addr; ++ size_t chunk_size = PAGES_PER_CHUNK << PAGE_SHIFT; ++ ++ chunk = dma_alloc_from_contiguous(&vc_cma_device.dev, ++ PAGES_PER_CHUNK, ++ VC_CMA_CHUNK_ORDER); ++ if (!chunk) ++ break; ++ ++ chunk_addr = page_address(chunk); ++ dmac_flush_range(chunk_addr, chunk_addr + chunk_size); ++ outer_inv_range(__pa(chunk_addr), __pa(chunk_addr) + ++ chunk_size); ++ ++ chunk_num = ++ (page_to_phys(chunk) - vc_cma_base) / VC_CMA_CHUNK_SIZE; ++ BUG_ON(((page_to_phys(chunk) - vc_cma_base) % ++ VC_CMA_CHUNK_SIZE) != 0); ++ if (chunk_num >= vc_cma_chunks) { ++ phys_addr_t _pa = vc_cma_base + vc_cma_size - 1; ++ LOG_ERR("%s: ===============================", ++ __func__); ++ LOG_ERR("%s: chunk phys %x, vc_cma %pa-%pa - " ++ "bad SPARSEMEM configuration?", ++ __func__, (unsigned int)page_to_phys(chunk), ++ &vc_cma_base, &_pa); ++ LOG_ERR("%s: dev->cma_area = %p", __func__, ++ (void*)0/*vc_cma_device.dev.cma_area*/); ++ LOG_ERR("%s: ===============================", ++ __func__); ++ break; ++ } ++ reply->params[i] = chunk_num; ++ vc_cma_chunks_used++; ++ } ++ ++ if (i < num_chunks) { ++ LOG_ERR("%s: dma_alloc_from_contiguous failed " ++ "for %x bytes (alloc %d of %d, %d free)", ++ __func__, VC_CMA_CHUNK_SIZE, i, ++ num_chunks, vc_cma_chunks - vc_cma_chunks_used); ++ num_chunks = i; ++ } ++ ++ LOG_DBG("CMA allocated %d chunks -> %d used", ++ num_chunks, vc_cma_chunks_used); ++ reply->type = VC_CMA_MSG_ALLOCATED; ++ ++ { ++ VCHIQ_ELEMENT_T elem = { ++ reply, ++ offsetof(struct cma_msg, params[0]) + ++ num_chunks * sizeof(reply->params[0]) ++ }; ++ VCHIQ_STATUS_T ret; ++ vchiq_use_service(cma_service); ++ ret = vchiq_queue_message(cma_service, &elem, 1); ++ vchiq_release_service(cma_service); ++ if (ret != VCHIQ_SUCCESS) ++ LOG_ERR("vchiq_queue_message return " "%x", ret); ++ } ++ ++ return num_chunks; ++} ++ ++static int cma_worker_proc(void *param) ++{ ++ static struct cma_msg reply; ++ (void)param; ++ ++ while (1) { ++ VCHIQ_HEADER_T *msg; ++ static struct cma_msg msg_copy; ++ struct cma_msg *cma_msg = &msg_copy; ++ int type, msg_size; ++ ++ msg = vchiu_queue_pop(&cma_msg_queue); ++ if ((unsigned int)msg >= VC_CMA_MSG_MAX) { ++ msg_size = msg->size; ++ memcpy(&msg_copy, msg->data, msg_size); ++ type = cma_msg->type; ++ vchiq_release_message(cma_service, msg); ++ } else { ++ msg_size = 0; ++ type = (int)msg; ++ if (type == VC_CMA_MSG_QUIT) ++ break; ++ else if (type == VC_CMA_MSG_UPDATE_RESERVE) { ++ msg = NULL; ++ cma_msg = NULL; ++ } else { ++ BUG(); ++ continue; ++ } ++ } ++ ++ switch (type) { ++ case VC_CMA_MSG_ALLOC:{ ++ int num_chunks, free_chunks; ++ num_chunks = cma_msg->params[0]; ++ free_chunks = ++ vc_cma_chunks - vc_cma_chunks_used; ++ LOG_DBG("CMA_MSG_ALLOC(%d chunks)", num_chunks); ++ if (num_chunks > VC_CMA_MAX_PARAMS_PER_MSG) { ++ LOG_ERR ++ ("CMA_MSG_ALLOC - chunk count (%d) " ++ "exceeds VC_CMA_MAX_PARAMS_PER_MSG (%d)", ++ num_chunks, ++ VC_CMA_MAX_PARAMS_PER_MSG); ++ num_chunks = VC_CMA_MAX_PARAMS_PER_MSG; ++ } ++ ++ if (num_chunks > free_chunks) { ++ LOG_ERR ++ ("CMA_MSG_ALLOC - chunk count (%d) " ++ "exceeds free chunks (%d)", ++ num_chunks, free_chunks); ++ num_chunks = free_chunks; ++ } ++ ++ vc_cma_alloc_chunks(num_chunks, &reply); ++ } ++ break; ++ ++ case VC_CMA_MSG_FREE:{ ++ int chunk_count = ++ (msg_size - ++ offsetof(struct cma_msg, ++ params)) / ++ sizeof(cma_msg->params[0]); ++ int i; ++ BUG_ON(chunk_count <= 0); ++ ++ LOG_DBG("CMA_MSG_FREE(%d chunks - %x, ...)", ++ chunk_count, cma_msg->params[0]); ++ for (i = 0; i < chunk_count; i++) { ++ int chunk_num = cma_msg->params[i]; ++ struct page *page = vc_cma_base_page + ++ chunk_num * PAGES_PER_CHUNK; ++ if (chunk_num >= vc_cma_chunks) { ++ LOG_ERR ++ ("CMA_MSG_FREE - chunk %d of %d" ++ " (value %x) exceeds maximum " ++ "(%x)", i, chunk_count, ++ chunk_num, ++ vc_cma_chunks - 1); ++ break; ++ } ++ ++ if (!dma_release_from_contiguous ++ (&vc_cma_device.dev, page, ++ PAGES_PER_CHUNK)) { ++ phys_addr_t _pa = page_to_phys(page); ++ LOG_ERR ++ ("CMA_MSG_FREE - failed to " ++ "release chunk %d (phys %pa, " ++ "page %x)", chunk_num, ++ &_pa, ++ (unsigned int)page); ++ } ++ vc_cma_chunks_used--; ++ } ++ LOG_DBG("CMA released %d chunks -> %d used", ++ i, vc_cma_chunks_used); ++ } ++ break; ++ ++ case VC_CMA_MSG_UPDATE_RESERVE:{ ++ int chunks_needed = ++ ((vc_cma_reserve_total + VC_CMA_CHUNK_SIZE - ++ 1) ++ / VC_CMA_CHUNK_SIZE) - ++ vc_cma_chunks_reserved; ++ ++ LOG_DBG ++ ("CMA_MSG_UPDATE_RESERVE(%d chunks needed)", ++ chunks_needed); ++ ++ /* Cap the reservations to what is available */ ++ if (chunks_needed > 0) { ++ if (chunks_needed > ++ (vc_cma_chunks - ++ vc_cma_chunks_used)) ++ chunks_needed = ++ (vc_cma_chunks - ++ vc_cma_chunks_used); ++ ++ chunks_needed = ++ vc_cma_alloc_chunks(chunks_needed, ++ &reply); ++ } ++ ++ LOG_DBG ++ ("CMA_MSG_UPDATE_RESERVE(%d chunks allocated)", ++ chunks_needed); ++ vc_cma_chunks_reserved += chunks_needed; ++ } ++ break; ++ ++ default: ++ LOG_ERR("unexpected msg type %d", type); ++ break; ++ } ++ } ++ ++ LOG_DBG("quitting..."); ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* vc_cma_connected_init ++* ++* This function is called once the videocore has been connected. ++* ++***************************************************************************/ ++ ++static void vc_cma_connected_init(void) ++{ ++ VCHIQ_SERVICE_PARAMS_T service_params; ++ ++ LOG_DBG("vc_cma_connected_init"); ++ ++ if (!vchiu_queue_init(&cma_msg_queue, 16)) { ++ LOG_ERR("could not create CMA msg queue"); ++ goto fail_queue; ++ } ++ ++ if (vchiq_initialise(&cma_instance) != VCHIQ_SUCCESS) ++ goto fail_vchiq_init; ++ ++ vchiq_connect(cma_instance); ++ ++ service_params.fourcc = VC_CMA_FOURCC; ++ service_params.callback = cma_service_callback; ++ service_params.userdata = NULL; ++ service_params.version = VC_CMA_VERSION; ++ service_params.version_min = VC_CMA_VERSION; ++ ++ if (vchiq_open_service(cma_instance, &service_params, ++ &cma_service) != VCHIQ_SUCCESS) { ++ LOG_ERR("failed to open service - already in use?"); ++ goto fail_vchiq_open; ++ } ++ ++ vchiq_release_service(cma_service); ++ ++ cma_worker = kthread_create(cma_worker_proc, NULL, "cma_worker"); ++ if (!cma_worker) { ++ LOG_ERR("could not create CMA worker thread"); ++ goto fail_worker; ++ } ++ set_user_nice(cma_worker, -20); ++ wake_up_process(cma_worker); ++ ++ return; ++ ++fail_worker: ++ vchiq_close_service(cma_service); ++fail_vchiq_open: ++ vchiq_shutdown(cma_instance); ++fail_vchiq_init: ++ vchiu_queue_delete(&cma_msg_queue); ++fail_queue: ++ return; ++} ++ ++void ++loud_error_header(void) ++{ ++ if (in_loud_error) ++ return; ++ ++ LOG_ERR("============================================================" ++ "================"); ++ LOG_ERR("============================================================" ++ "================"); ++ LOG_ERR("====="); ++ ++ in_loud_error = 1; ++} ++ ++void ++loud_error_footer(void) ++{ ++ if (!in_loud_error) ++ return; ++ ++ LOG_ERR("====="); ++ LOG_ERR("============================================================" ++ "================"); ++ LOG_ERR("============================================================" ++ "================"); ++ ++ in_loud_error = 0; ++} ++ ++#if 1 ++static int check_cma_config(void) { return 1; } ++#else ++static int ++read_vc_debug_var(VC_MEM_ACCESS_HANDLE_T handle, ++ const char *symbol, ++ void *buf, size_t bufsize) ++{ ++ VC_MEM_ADDR_T vcMemAddr; ++ size_t vcMemSize; ++ uint8_t *mapAddr; ++ off_t vcMapAddr; ++ ++ if (!LookupVideoCoreSymbol(handle, symbol, ++ &vcMemAddr, ++ &vcMemSize)) { ++ loud_error_header(); ++ loud_error( ++ "failed to find VC symbol \"%s\".", ++ symbol); ++ loud_error_footer(); ++ return 0; ++ } ++ ++ if (vcMemSize != bufsize) { ++ loud_error_header(); ++ loud_error( ++ "VC symbol \"%s\" is the wrong size.", ++ symbol); ++ loud_error_footer(); ++ return 0; ++ } ++ ++ vcMapAddr = (off_t)vcMemAddr & VC_MEM_TO_ARM_ADDR_MASK; ++ vcMapAddr += mm_vc_mem_phys_addr; ++ mapAddr = ioremap_nocache(vcMapAddr, vcMemSize); ++ if (mapAddr == 0) { ++ loud_error_header(); ++ loud_error( ++ "failed to ioremap \"%s\" @ 0x%x " ++ "(phys: 0x%x, size: %u).", ++ symbol, ++ (unsigned int)vcMapAddr, ++ (unsigned int)vcMemAddr, ++ (unsigned int)vcMemSize); ++ loud_error_footer(); ++ return 0; ++ } ++ ++ memcpy(buf, mapAddr, bufsize); ++ iounmap(mapAddr); ++ ++ return 1; ++} ++ ++ ++static int ++check_cma_config(void) ++{ ++ VC_MEM_ACCESS_HANDLE_T mem_hndl; ++ VC_MEM_ADDR_T mempool_start; ++ VC_MEM_ADDR_T mempool_end; ++ VC_MEM_ADDR_T mempool_offline_start; ++ VC_MEM_ADDR_T mempool_offline_end; ++ VC_MEM_ADDR_T cam_alloc_base; ++ VC_MEM_ADDR_T cam_alloc_size; ++ VC_MEM_ADDR_T cam_alloc_end; ++ int success = 0; ++ ++ if (OpenVideoCoreMemory(&mem_hndl) != 0) ++ goto out; ++ ++ /* Read the relevant VideoCore variables */ ++ if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_START", ++ &mempool_start, ++ sizeof(mempool_start))) ++ goto close; ++ ++ if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_END", ++ &mempool_end, ++ sizeof(mempool_end))) ++ goto close; ++ ++ if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_OFFLINE_START", ++ &mempool_offline_start, ++ sizeof(mempool_offline_start))) ++ goto close; ++ ++ if (!read_vc_debug_var(mem_hndl, "__MEMPOOL_OFFLINE_END", ++ &mempool_offline_end, ++ sizeof(mempool_offline_end))) ++ goto close; ++ ++ if (!read_vc_debug_var(mem_hndl, "cam_alloc_base", ++ &cam_alloc_base, ++ sizeof(cam_alloc_base))) ++ goto close; ++ ++ if (!read_vc_debug_var(mem_hndl, "cam_alloc_size", ++ &cam_alloc_size, ++ sizeof(cam_alloc_size))) ++ goto close; ++ ++ cam_alloc_end = cam_alloc_base + cam_alloc_size; ++ ++ success = 1; ++ ++ /* Now the sanity checks */ ++ if (!mempool_offline_start) ++ mempool_offline_start = mempool_start; ++ if (!mempool_offline_end) ++ mempool_offline_end = mempool_end; ++ ++ if (VCADDR_TO_PHYSADDR(mempool_offline_start) != vc_cma_base) { ++ loud_error_header(); ++ loud_error( ++ "__MEMPOOL_OFFLINE_START(%x -> %lx) doesn't match " ++ "vc_cma_base(%x)", ++ mempool_offline_start, ++ VCADDR_TO_PHYSADDR(mempool_offline_start), ++ vc_cma_base); ++ success = 0; ++ } ++ ++ if (VCADDR_TO_PHYSADDR(mempool_offline_end) != ++ (vc_cma_base + vc_cma_size)) { ++ loud_error_header(); ++ loud_error( ++ "__MEMPOOL_OFFLINE_END(%x -> %lx) doesn't match " ++ "vc_cma_base(%x) + vc_cma_size(%x) = %x", ++ mempool_offline_start, ++ VCADDR_TO_PHYSADDR(mempool_offline_end), ++ vc_cma_base, vc_cma_size, vc_cma_base + vc_cma_size); ++ success = 0; ++ } ++ ++ if (mempool_end < mempool_start) { ++ loud_error_header(); ++ loud_error( ++ "__MEMPOOL_END(%x) must not be before " ++ "__MEMPOOL_START(%x)", ++ mempool_end, ++ mempool_start); ++ success = 0; ++ } ++ ++ if (mempool_offline_end < mempool_offline_start) { ++ loud_error_header(); ++ loud_error( ++ "__MEMPOOL_OFFLINE_END(%x) must not be before " ++ "__MEMPOOL_OFFLINE_START(%x)", ++ mempool_offline_end, ++ mempool_offline_start); ++ success = 0; ++ } ++ ++ if (mempool_offline_start < mempool_start) { ++ loud_error_header(); ++ loud_error( ++ "__MEMPOOL_OFFLINE_START(%x) must not be before " ++ "__MEMPOOL_START(%x)", ++ mempool_offline_start, ++ mempool_start); ++ success = 0; ++ } ++ ++ if (mempool_offline_end > mempool_end) { ++ loud_error_header(); ++ loud_error( ++ "__MEMPOOL_OFFLINE_END(%x) must not be after " ++ "__MEMPOOL_END(%x)", ++ mempool_offline_end, ++ mempool_end); ++ success = 0; ++ } ++ ++ if ((cam_alloc_base < mempool_end) && ++ (cam_alloc_end > mempool_start)) { ++ loud_error_header(); ++ loud_error( ++ "cam_alloc pool(%x-%x) overlaps " ++ "mempool(%x-%x)", ++ cam_alloc_base, cam_alloc_end, ++ mempool_start, mempool_end); ++ success = 0; ++ } ++ ++ loud_error_footer(); ++ ++close: ++ CloseVideoCoreMemory(mem_hndl); ++ ++out: ++ return success; ++} ++#endif ++ ++static int vc_cma_init(void) ++{ ++ int rc = -EFAULT; ++ struct device *dev; ++ ++ if (!check_cma_config()) ++ goto out_release; ++ ++ LOG_INFO("vc-cma: Videocore CMA driver"); ++ LOG_INFO("vc-cma: vc_cma_base = %pa", &vc_cma_base); ++ LOG_INFO("vc-cma: vc_cma_size = 0x%08x (%u MiB)", ++ vc_cma_size, vc_cma_size / (1024 * 1024)); ++ LOG_INFO("vc-cma: vc_cma_initial = 0x%08x (%u MiB)", ++ vc_cma_initial, vc_cma_initial / (1024 * 1024)); ++ ++ vc_cma_base_page = phys_to_page(vc_cma_base); ++ ++ if (vc_cma_chunks) { ++ int chunks_needed = vc_cma_initial / VC_CMA_CHUNK_SIZE; ++ ++ for (vc_cma_chunks_used = 0; ++ vc_cma_chunks_used < chunks_needed; vc_cma_chunks_used++) { ++ struct page *chunk; ++ chunk = dma_alloc_from_contiguous(&vc_cma_device.dev, ++ PAGES_PER_CHUNK, ++ VC_CMA_CHUNK_ORDER); ++ if (!chunk) ++ break; ++ BUG_ON(((page_to_phys(chunk) - vc_cma_base) % ++ VC_CMA_CHUNK_SIZE) != 0); ++ } ++ if (vc_cma_chunks_used != chunks_needed) { ++ LOG_ERR("%s: dma_alloc_from_contiguous failed (%d " ++ "bytes, allocation %d of %d)", ++ __func__, VC_CMA_CHUNK_SIZE, ++ vc_cma_chunks_used, chunks_needed); ++ goto out_release; ++ } ++ ++ vchiq_add_connected_callback(vc_cma_connected_init); ++ } ++ ++ rc = alloc_chrdev_region(&vc_cma_devnum, 0, 1, DRIVER_NAME); ++ if (rc < 0) { ++ LOG_ERR("%s: alloc_chrdev_region failed (rc=%d)", __func__, rc); ++ goto out_release; ++ } ++ ++ cdev_init(&vc_cma_cdev, &vc_cma_fops); ++ rc = cdev_add(&vc_cma_cdev, vc_cma_devnum, 1); ++ if (rc != 0) { ++ LOG_ERR("%s: cdev_add failed (rc=%d)", __func__, rc); ++ goto out_unregister; ++ } ++ ++ vc_cma_class = class_create(THIS_MODULE, DRIVER_NAME); ++ if (IS_ERR(vc_cma_class)) { ++ rc = PTR_ERR(vc_cma_class); ++ LOG_ERR("%s: class_create failed (rc=%d)", __func__, rc); ++ goto out_cdev_del; ++ } ++ ++ dev = device_create(vc_cma_class, NULL, vc_cma_devnum, NULL, ++ DRIVER_NAME); ++ if (IS_ERR(dev)) { ++ rc = PTR_ERR(dev); ++ LOG_ERR("%s: device_create failed (rc=%d)", __func__, rc); ++ goto out_class_destroy; ++ } ++ ++ vc_cma_proc_entry = proc_create(DRIVER_NAME, 0444, NULL, &vc_cma_proc_fops); ++ if (vc_cma_proc_entry == NULL) { ++ rc = -EFAULT; ++ LOG_ERR("%s: proc_create failed", __func__); ++ goto out_device_destroy; ++ } ++ ++ vc_cma_inited = 1; ++ return 0; ++ ++out_device_destroy: ++ device_destroy(vc_cma_class, vc_cma_devnum); ++ ++out_class_destroy: ++ class_destroy(vc_cma_class); ++ vc_cma_class = NULL; ++ ++out_cdev_del: ++ cdev_del(&vc_cma_cdev); ++ ++out_unregister: ++ unregister_chrdev_region(vc_cma_devnum, 1); ++ ++out_release: ++ /* It is tempting to try to clean up by calling ++ dma_release_from_contiguous for all allocated chunks, but it isn't ++ a very safe thing to do. If vc_cma_initial is non-zero it is because ++ VideoCore is already using that memory, so giving it back to Linux ++ is likely to be fatal. ++ */ ++ return -1; ++} ++ ++/**************************************************************************** ++* ++* vc_cma_exit ++* ++***************************************************************************/ ++ ++static void __exit vc_cma_exit(void) ++{ ++ LOG_DBG("%s: called", __func__); ++ ++ if (vc_cma_inited) { ++ remove_proc_entry(DRIVER_NAME, NULL); ++ device_destroy(vc_cma_class, vc_cma_devnum); ++ class_destroy(vc_cma_class); ++ cdev_del(&vc_cma_cdev); ++ unregister_chrdev_region(vc_cma_devnum, 1); ++ } ++} ++ ++module_init(vc_cma_init); ++module_exit(vc_cma_exit); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Broadcom Corporation"); +--- /dev/null ++++ b/include/linux/broadcom/vc_cma.h +@@ -0,0 +1,36 @@ ++/***************************************************************************** ++* Copyright 2012 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#if !defined( VC_CMA_H ) ++#define VC_CMA_H ++ ++#include ++ ++#define VC_CMA_IOC_MAGIC 0xc5 ++ ++#define VC_CMA_IOC_RESERVE _IO(VC_CMA_IOC_MAGIC, 0) ++ ++#ifdef __KERNEL__ ++ ++#ifdef CONFIG_BCM_VC_CMA ++void vc_cma_early_init(void); ++void vc_cma_reserve(void); ++#else ++static inline void vc_cma_early_init(void) { } ++static inline void vc_cma_reserve(void) { } ++#endif ++ ++#endif ++ ++#endif /* VC_CMA_H */ diff --git a/target/linux/brcm2708/patches-4.9/950-0038-bcm2708-alsa-sound-driver.patch b/target/linux/brcm2708/patches-4.9/950-0038-bcm2708-alsa-sound-driver.patch new file mode 100644 index 000000000000..58b45dec6e2f --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0038-bcm2708-alsa-sound-driver.patch @@ -0,0 +1,2715 @@ +From 41a90e24c272c84fb8c6d23ac451f0c725dcded6 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Mon, 26 Mar 2012 22:15:50 +0100 +Subject: [PATCH] bcm2708: alsa sound driver +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: popcornmix + +alsa: add mmap support and some cleanups to bcm2835 ALSA driver + +snd-bcm2835: Add support for spdif/hdmi passthrough + +This adds a dedicated subdevice which can be used for passthrough of non-audio +formats (ie encoded a52) through the hdmi audio link. In addition to this +driver extension an appropriate card config is required to make alsa-lib +support the AES parameters for this device. + +snd-bcm2708: Add mutex, improve logging + +Fix for ALSA driver crash + +Avoids an issue when closing and opening vchiq where a message can arrive before service handle has been written + +alsa: reduce severity of expected warning message + +snd-bcm2708: Fix dmesg spam for non-error case + +alsa: Ensure mutexes are released through error paths + +alsa: Make interrupted close paths quieter + +BCM270x: Add onboard sound device to Device Tree + +Add Device Tree support to alsa driver. +Add device to Device Tree. +Don't add platform devices when booting in DT mode. + +Signed-off-by: Noralf Trønnes + +bcm2835: access controls under the audio mutex + +I don't think the ALSA framework provides any kind of automatic +synchronization within the control callbacks. We most likely need +to ensure this manually, so add locking around all access to shared +mutable data. In particular, bcm2835_audio_set_ctls() should +probably always be called under our own audio lock. + +snd-bcm2835: Don't allow responses from VC to be interrupted by user signals + +There should always be a response, and retry after a signal interruption is not handled, so don't report +we are interruptible. + +See: https://github.com/raspberrypi/linux/issues/1560 + +snd-bcm2835: Use bcm2835_hw params in preallocate +--- + sound/arm/Kconfig | 7 + + sound/arm/Makefile | 5 + + sound/arm/bcm2835-ctl.c | 350 +++++++++++++++ + sound/arm/bcm2835-pcm.c | 563 +++++++++++++++++++++++ + sound/arm/bcm2835-vchiq.c | 889 +++++++++++++++++++++++++++++++++++++ + sound/arm/bcm2835.c | 511 +++++++++++++++++++++ + sound/arm/bcm2835.h | 167 +++++++ + sound/arm/vc_vchi_audioserv_defs.h | 116 +++++ + 8 files changed, 2608 insertions(+) + create mode 100755 sound/arm/bcm2835-ctl.c + create mode 100755 sound/arm/bcm2835-pcm.c + create mode 100755 sound/arm/bcm2835-vchiq.c + create mode 100644 sound/arm/bcm2835.c + create mode 100755 sound/arm/bcm2835.h + create mode 100644 sound/arm/vc_vchi_audioserv_defs.h + +--- a/sound/arm/Kconfig ++++ b/sound/arm/Kconfig +@@ -32,6 +32,13 @@ config SND_PXA2XX_AC97 + Say Y or M if you want to support any AC97 codec attached to + the PXA2xx AC97 interface. + ++config SND_BCM2835 ++ tristate "BCM2835 ALSA driver" ++ depends on ARCH_BCM2835 && BCM2708_VCHIQ && SND ++ select SND_PCM ++ help ++ Say Y or M if you want to support BCM2835 Alsa pcm card driver ++ + endif # SND_ARM + + config SND_PXA2XX_LIB +--- a/sound/arm/Makefile ++++ b/sound/arm/Makefile +@@ -14,3 +14,8 @@ snd-pxa2xx-lib-$(CONFIG_SND_PXA2XX_LIB_A + + obj-$(CONFIG_SND_PXA2XX_AC97) += snd-pxa2xx-ac97.o + snd-pxa2xx-ac97-objs := pxa2xx-ac97.o ++ ++obj-$(CONFIG_SND_BCM2835) += snd-bcm2835.o ++snd-bcm2835-objs := bcm2835.o bcm2835-ctl.o bcm2835-pcm.o bcm2835-vchiq.o ++ ++ccflags-y += -Idrivers/staging/vc04_services -Idrivers/staging/vc04_services/interface/vcos/linuxkernel -D__VCCOREVER__=0x04000000 +--- /dev/null ++++ b/sound/arm/bcm2835-ctl.c +@@ -0,0 +1,350 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "bcm2835.h" ++ ++/* volume maximum and minimum in terms of 0.01dB */ ++#define CTRL_VOL_MAX 400 ++#define CTRL_VOL_MIN -10239 /* originally -10240 */ ++ ++ ++static int snd_bcm2835_ctl_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ audio_info(" ... IN\n"); ++ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) { ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 1; ++ uinfo->value.integer.min = CTRL_VOL_MIN; ++ uinfo->value.integer.max = CTRL_VOL_MAX; /* 2303 */ ++ } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) { ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = 1; ++ } else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) { ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = AUDIO_DEST_MAX-1; ++ } ++ audio_info(" ... OUT\n"); ++ return 0; ++} ++ ++/* toggles mute on or off depending on the value of nmute, and returns ++ * 1 if the mute value was changed, otherwise 0 ++ */ ++static int toggle_mute(struct bcm2835_chip *chip, int nmute) ++{ ++ /* if settings are ok, just return 0 */ ++ if(chip->mute == nmute) ++ return 0; ++ ++ /* if the sound is muted then we need to unmute */ ++ if(chip->mute == CTRL_VOL_MUTE) ++ { ++ chip->volume = chip->old_volume; /* copy the old volume back */ ++ audio_info("Unmuting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume); ++ } ++ else /* otherwise we mute */ ++ { ++ chip->old_volume = chip->volume; ++ chip->volume = 26214; /* set volume to minimum level AKA mute */ ++ audio_info("Muting, old_volume = %d, volume = %d ...\n", chip->old_volume, chip->volume); ++ } ++ ++ chip->mute = nmute; ++ return 1; ++} ++ ++static int snd_bcm2835_ctl_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); ++ ++ if (mutex_lock_interruptible(&chip->audio_mutex)) ++ return -EINTR; ++ ++ BUG_ON(!chip && !(chip->avail_substreams & AVAIL_SUBSTREAMS_MASK)); ++ ++ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) ++ ucontrol->value.integer.value[0] = chip2alsa(chip->volume); ++ else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) ++ ucontrol->value.integer.value[0] = chip->mute; ++ else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) ++ ucontrol->value.integer.value[0] = chip->dest; ++ ++ mutex_unlock(&chip->audio_mutex); ++ return 0; ++} ++ ++static int snd_bcm2835_ctl_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); ++ int changed = 0; ++ ++ if (mutex_lock_interruptible(&chip->audio_mutex)) ++ return -EINTR; ++ ++ if (kcontrol->private_value == PCM_PLAYBACK_VOLUME) { ++ audio_info("Volume change attempted.. volume = %d new_volume = %d\n", chip->volume, (int)ucontrol->value.integer.value[0]); ++ if (chip->mute == CTRL_VOL_MUTE) { ++ /* changed = toggle_mute(chip, CTRL_VOL_UNMUTE); */ ++ changed = 1; /* should return 0 to signify no change but the mixer takes this as the opposite sign (no idea why) */ ++ goto unlock; ++ } ++ if (changed ++ || (ucontrol->value.integer.value[0] != chip2alsa(chip->volume))) { ++ ++ chip->volume = alsa2chip(ucontrol->value.integer.value[0]); ++ changed = 1; ++ } ++ ++ } else if (kcontrol->private_value == PCM_PLAYBACK_MUTE) { ++ /* Now implemented */ ++ audio_info(" Mute attempted\n"); ++ changed = toggle_mute(chip, ucontrol->value.integer.value[0]); ++ ++ } else if (kcontrol->private_value == PCM_PLAYBACK_DEVICE) { ++ if (ucontrol->value.integer.value[0] != chip->dest) { ++ chip->dest = ucontrol->value.integer.value[0]; ++ changed = 1; ++ } ++ } ++ ++ if (changed) { ++ if (bcm2835_audio_set_ctls(chip)) ++ printk(KERN_ERR "Failed to set ALSA controls..\n"); ++ } ++ ++unlock: ++ mutex_unlock(&chip->audio_mutex); ++ return changed; ++} ++ ++static DECLARE_TLV_DB_SCALE(snd_bcm2835_db_scale, CTRL_VOL_MIN, 1, 1); ++ ++static struct snd_kcontrol_new snd_bcm2835_ctl[] = { ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "PCM Playback Volume", ++ .index = 0, ++ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, ++ .private_value = PCM_PLAYBACK_VOLUME, ++ .info = snd_bcm2835_ctl_info, ++ .get = snd_bcm2835_ctl_get, ++ .put = snd_bcm2835_ctl_put, ++ .count = 1, ++ .tlv = {.p = snd_bcm2835_db_scale} ++ }, ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "PCM Playback Switch", ++ .index = 0, ++ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, ++ .private_value = PCM_PLAYBACK_MUTE, ++ .info = snd_bcm2835_ctl_info, ++ .get = snd_bcm2835_ctl_get, ++ .put = snd_bcm2835_ctl_put, ++ .count = 1, ++ }, ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "PCM Playback Route", ++ .index = 0, ++ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, ++ .private_value = PCM_PLAYBACK_DEVICE, ++ .info = snd_bcm2835_ctl_info, ++ .get = snd_bcm2835_ctl_get, ++ .put = snd_bcm2835_ctl_put, ++ .count = 1, ++ }, ++}; ++ ++static int snd_bcm2835_spdif_default_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; ++ uinfo->count = 1; ++ return 0; ++} ++ ++static int snd_bcm2835_spdif_default_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); ++ int i; ++ ++ if (mutex_lock_interruptible(&chip->audio_mutex)) ++ return -EINTR; ++ ++ for (i = 0; i < 4; i++) ++ ucontrol->value.iec958.status[i] = ++ (chip->spdif_status >> (i * 8)) && 0xff; ++ ++ mutex_unlock(&chip->audio_mutex); ++ return 0; ++} ++ ++static int snd_bcm2835_spdif_default_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); ++ unsigned int val = 0; ++ int i, change; ++ ++ if (mutex_lock_interruptible(&chip->audio_mutex)) ++ return -EINTR; ++ ++ for (i = 0; i < 4; i++) ++ val |= (unsigned int)ucontrol->value.iec958.status[i] << (i * 8); ++ ++ change = val != chip->spdif_status; ++ chip->spdif_status = val; ++ ++ mutex_unlock(&chip->audio_mutex); ++ return change; ++} ++ ++static int snd_bcm2835_spdif_mask_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; ++ uinfo->count = 1; ++ return 0; ++} ++ ++static int snd_bcm2835_spdif_mask_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ /* bcm2835 supports only consumer mode and sets all other format flags ++ * automatically. So the only thing left is signalling non-audio ++ * content */ ++ ucontrol->value.iec958.status[0] = IEC958_AES0_NONAUDIO; ++ return 0; ++} ++ ++static int snd_bcm2835_spdif_stream_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; ++ uinfo->count = 1; ++ return 0; ++} ++ ++static int snd_bcm2835_spdif_stream_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); ++ int i; ++ ++ if (mutex_lock_interruptible(&chip->audio_mutex)) ++ return -EINTR; ++ ++ for (i = 0; i < 4; i++) ++ ucontrol->value.iec958.status[i] = ++ (chip->spdif_status >> (i * 8)) & 0xff; ++ ++ mutex_unlock(&chip->audio_mutex); ++ return 0; ++} ++ ++static int snd_bcm2835_spdif_stream_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct bcm2835_chip *chip = snd_kcontrol_chip(kcontrol); ++ unsigned int val = 0; ++ int i, change; ++ ++ if (mutex_lock_interruptible(&chip->audio_mutex)) ++ return -EINTR; ++ ++ for (i = 0; i < 4; i++) ++ val |= (unsigned int)ucontrol->value.iec958.status[i] << (i * 8); ++ change = val != chip->spdif_status; ++ chip->spdif_status = val; ++ ++ mutex_unlock(&chip->audio_mutex); ++ return change; ++} ++ ++static struct snd_kcontrol_new snd_bcm2835_spdif[] = { ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_PCM, ++ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), ++ .info = snd_bcm2835_spdif_default_info, ++ .get = snd_bcm2835_spdif_default_get, ++ .put = snd_bcm2835_spdif_default_put ++ }, ++ { ++ .access = SNDRV_CTL_ELEM_ACCESS_READ, ++ .iface = SNDRV_CTL_ELEM_IFACE_PCM, ++ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, CON_MASK), ++ .info = snd_bcm2835_spdif_mask_info, ++ .get = snd_bcm2835_spdif_mask_get, ++ }, ++ { ++ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | ++ SNDRV_CTL_ELEM_ACCESS_INACTIVE, ++ .iface = SNDRV_CTL_ELEM_IFACE_PCM, ++ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, PCM_STREAM), ++ .info = snd_bcm2835_spdif_stream_info, ++ .get = snd_bcm2835_spdif_stream_get, ++ .put = snd_bcm2835_spdif_stream_put, ++ }, ++}; ++ ++int snd_bcm2835_new_ctl(bcm2835_chip_t * chip) ++{ ++ int err; ++ unsigned int idx; ++ ++ strcpy(chip->card->mixername, "Broadcom Mixer"); ++ for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_ctl); idx++) { ++ err = ++ snd_ctl_add(chip->card, ++ snd_ctl_new1(&snd_bcm2835_ctl[idx], chip)); ++ if (err < 0) ++ return err; ++ } ++ for (idx = 0; idx < ARRAY_SIZE(snd_bcm2835_spdif); idx++) { ++ err = snd_ctl_add(chip->card, ++ snd_ctl_new1(&snd_bcm2835_spdif[idx], chip)); ++ if (err < 0) ++ return err; ++ } ++ return 0; ++} +--- /dev/null ++++ b/sound/arm/bcm2835-pcm.c +@@ -0,0 +1,563 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include ++#include ++ ++#include ++ ++#include "bcm2835.h" ++ ++/* hardware definition */ ++static struct snd_pcm_hardware snd_bcm2835_playback_hw = { ++ .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | ++ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID), ++ .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, ++ .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, ++ .rate_min = 8000, ++ .rate_max = 48000, ++ .channels_min = 1, ++ .channels_max = 2, ++ .buffer_bytes_max = 128 * 1024, ++ .period_bytes_min = 1 * 1024, ++ .period_bytes_max = 128 * 1024, ++ .periods_min = 1, ++ .periods_max = 128, ++}; ++ ++static struct snd_pcm_hardware snd_bcm2835_playback_spdif_hw = { ++ .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | ++ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID), ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_44100 | ++ SNDRV_PCM_RATE_48000, ++ .rate_min = 44100, ++ .rate_max = 48000, ++ .channels_min = 2, ++ .channels_max = 2, ++ .buffer_bytes_max = 128 * 1024, ++ .period_bytes_min = 1 * 1024, ++ .period_bytes_max = 128 * 1024, ++ .periods_min = 1, ++ .periods_max = 128, ++}; ++ ++static void snd_bcm2835_playback_free(struct snd_pcm_runtime *runtime) ++{ ++ audio_info("Freeing up alsa stream here ..\n"); ++ if (runtime->private_data) ++ kfree(runtime->private_data); ++ runtime->private_data = NULL; ++} ++ ++static irqreturn_t bcm2835_playback_fifo_irq(int irq, void *dev_id) ++{ ++ bcm2835_alsa_stream_t *alsa_stream = (bcm2835_alsa_stream_t *) dev_id; ++ uint32_t consumed = 0; ++ int new_period = 0; ++ ++ audio_info(" .. IN\n"); ++ ++ audio_info("alsa_stream=%p substream=%p\n", alsa_stream, ++ alsa_stream ? alsa_stream->substream : 0); ++ ++ if (alsa_stream->open) ++ consumed = bcm2835_audio_retrieve_buffers(alsa_stream); ++ ++ /* We get called only if playback was triggered, So, the number of buffers we retrieve in ++ * each iteration are the buffers that have been played out already ++ */ ++ ++ if (alsa_stream->period_size) { ++ if ((alsa_stream->pos / alsa_stream->period_size) != ++ ((alsa_stream->pos + consumed) / alsa_stream->period_size)) ++ new_period = 1; ++ } ++ audio_debug("updating pos cur: %d + %d max:%d period_bytes:%d, hw_ptr: %d new_period:%d\n", ++ alsa_stream->pos, ++ consumed, ++ alsa_stream->buffer_size, ++ (int)(alsa_stream->period_size*alsa_stream->substream->runtime->periods), ++ frames_to_bytes(alsa_stream->substream->runtime, alsa_stream->substream->runtime->status->hw_ptr), ++ new_period); ++ if (alsa_stream->buffer_size) { ++ alsa_stream->pos += consumed &~ (1<<30); ++ alsa_stream->pos %= alsa_stream->buffer_size; ++ } ++ ++ if (alsa_stream->substream) { ++ if (new_period) ++ snd_pcm_period_elapsed(alsa_stream->substream); ++ } else { ++ audio_warning(" unexpected NULL substream\n"); ++ } ++ audio_info(" .. OUT\n"); ++ ++ return IRQ_HANDLED; ++} ++ ++/* open callback */ ++static int snd_bcm2835_playback_open_generic( ++ struct snd_pcm_substream *substream, int spdif) ++{ ++ bcm2835_chip_t *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream; ++ int idx; ++ int err; ++ ++ audio_info(" .. IN (%d)\n", substream->number); ++ ++ if(mutex_lock_interruptible(&chip->audio_mutex)) ++ { ++ audio_error("Interrupted whilst waiting for lock\n"); ++ return -EINTR; ++ } ++ audio_info("Alsa open (%d)\n", substream->number); ++ idx = substream->number; ++ ++ if (spdif && chip->opened != 0) { ++ err = -EBUSY; ++ goto out; ++ } ++ else if (!spdif && (chip->opened & (1 << idx))) { ++ err = -EBUSY; ++ goto out; ++ } ++ if (idx > MAX_SUBSTREAMS) { ++ audio_error ++ ("substream(%d) device doesn't exist max(%d) substreams allowed\n", ++ idx, MAX_SUBSTREAMS); ++ err = -ENODEV; ++ goto out; ++ } ++ ++ /* Check if we are ready */ ++ if (!(chip->avail_substreams & (1 << idx))) { ++ /* We are not ready yet */ ++ audio_error("substream(%d) device is not ready yet\n", idx); ++ err = -EAGAIN; ++ goto out; ++ } ++ ++ alsa_stream = kzalloc(sizeof(bcm2835_alsa_stream_t), GFP_KERNEL); ++ if (alsa_stream == NULL) { ++ err = -ENOMEM; ++ goto out; ++ } ++ ++ /* Initialise alsa_stream */ ++ alsa_stream->chip = chip; ++ alsa_stream->substream = substream; ++ alsa_stream->idx = idx; ++ ++ sema_init(&alsa_stream->buffers_update_sem, 0); ++ sema_init(&alsa_stream->control_sem, 0); ++ spin_lock_init(&alsa_stream->lock); ++ ++ /* Enabled in start trigger, called on each "fifo irq" after that */ ++ alsa_stream->enable_fifo_irq = 0; ++ alsa_stream->fifo_irq_handler = bcm2835_playback_fifo_irq; ++ ++ err = bcm2835_audio_open(alsa_stream); ++ if (err != 0) { ++ kfree(alsa_stream); ++ goto out; ++ } ++ runtime->private_data = alsa_stream; ++ runtime->private_free = snd_bcm2835_playback_free; ++ if (spdif) { ++ runtime->hw = snd_bcm2835_playback_spdif_hw; ++ } else { ++ /* clear spdif status, as we are not in spdif mode */ ++ chip->spdif_status = 0; ++ runtime->hw = snd_bcm2835_playback_hw; ++ } ++ /* minimum 16 bytes alignment (for vchiq bulk transfers) */ ++ snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES, ++ 16); ++ ++ chip->alsa_stream[idx] = alsa_stream; ++ ++ chip->opened |= (1 << idx); ++ alsa_stream->open = 1; ++ alsa_stream->draining = 1; ++ ++out: ++ mutex_unlock(&chip->audio_mutex); ++ ++ audio_info(" .. OUT =%d\n", err); ++ ++ return err; ++} ++ ++static int snd_bcm2835_playback_open(struct snd_pcm_substream *substream) ++{ ++ return snd_bcm2835_playback_open_generic(substream, 0); ++} ++ ++static int snd_bcm2835_playback_spdif_open(struct snd_pcm_substream *substream) ++{ ++ return snd_bcm2835_playback_open_generic(substream, 1); ++} ++ ++/* close callback */ ++static int snd_bcm2835_playback_close(struct snd_pcm_substream *substream) ++{ ++ /* the hardware-specific codes will be here */ ++ ++ bcm2835_chip_t *chip; ++ struct snd_pcm_runtime *runtime; ++ bcm2835_alsa_stream_t *alsa_stream; ++ ++ audio_info(" .. IN\n"); ++ ++ chip = snd_pcm_substream_chip(substream); ++ if(mutex_lock_interruptible(&chip->audio_mutex)) ++ { ++ audio_error("Interrupted whilst waiting for lock\n"); ++ return -EINTR; ++ } ++ runtime = substream->runtime; ++ alsa_stream = runtime->private_data; ++ ++ audio_info("Alsa close\n"); ++ ++ /* ++ * Call stop if it's still running. This happens when app ++ * is force killed and we don't get a stop trigger. ++ */ ++ if (alsa_stream->running) { ++ int err; ++ err = bcm2835_audio_stop(alsa_stream); ++ alsa_stream->running = 0; ++ if (err != 0) ++ audio_error(" Failed to STOP alsa device\n"); ++ } ++ ++ alsa_stream->period_size = 0; ++ alsa_stream->buffer_size = 0; ++ ++ if (alsa_stream->open) { ++ alsa_stream->open = 0; ++ bcm2835_audio_close(alsa_stream); ++ } ++ if (alsa_stream->chip) ++ alsa_stream->chip->alsa_stream[alsa_stream->idx] = NULL; ++ /* ++ * Do not free up alsa_stream here, it will be freed up by ++ * runtime->private_free callback we registered in *_open above ++ */ ++ ++ chip->opened &= ~(1 << substream->number); ++ ++ mutex_unlock(&chip->audio_mutex); ++ audio_info(" .. OUT\n"); ++ ++ return 0; ++} ++ ++/* hw_params callback */ ++static int snd_bcm2835_pcm_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; ++ int err; ++ ++ audio_info(" .. IN\n"); ++ ++ err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); ++ if (err < 0) { ++ audio_error ++ (" pcm_lib_malloc failed to allocated pages for buffers\n"); ++ return err; ++ } ++ ++ alsa_stream->channels = params_channels(params); ++ alsa_stream->params_rate = params_rate(params); ++ alsa_stream->pcm_format_width = snd_pcm_format_width(params_format (params)); ++ audio_info(" .. OUT\n"); ++ ++ return err; ++} ++ ++/* hw_free callback */ ++static int snd_bcm2835_pcm_hw_free(struct snd_pcm_substream *substream) ++{ ++ audio_info(" .. IN\n"); ++ return snd_pcm_lib_free_pages(substream); ++} ++ ++/* prepare callback */ ++static int snd_bcm2835_pcm_prepare(struct snd_pcm_substream *substream) ++{ ++ bcm2835_chip_t *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; ++ int channels; ++ int err; ++ ++ audio_info(" .. IN\n"); ++ ++ if (mutex_lock_interruptible(&chip->audio_mutex)) ++ return -EINTR; ++ ++ /* notify the vchiq that it should enter spdif passthrough mode by ++ * setting channels=0 (see ++ * https://github.com/raspberrypi/linux/issues/528) */ ++ if (chip->spdif_status & IEC958_AES0_NONAUDIO) ++ channels = 0; ++ else ++ channels = alsa_stream->channels; ++ ++ err = bcm2835_audio_set_params(alsa_stream, channels, ++ alsa_stream->params_rate, ++ alsa_stream->pcm_format_width); ++ if (err < 0) { ++ audio_error(" error setting hw params\n"); ++ } ++ ++ bcm2835_audio_setup(alsa_stream); ++ ++ /* in preparation of the stream, set the controls (volume level) of the stream */ ++ bcm2835_audio_set_ctls(alsa_stream->chip); ++ ++ ++ memset(&alsa_stream->pcm_indirect, 0, sizeof(alsa_stream->pcm_indirect)); ++ ++ alsa_stream->pcm_indirect.hw_buffer_size = ++ alsa_stream->pcm_indirect.sw_buffer_size = ++ snd_pcm_lib_buffer_bytes(substream); ++ ++ alsa_stream->buffer_size = snd_pcm_lib_buffer_bytes(substream); ++ alsa_stream->period_size = snd_pcm_lib_period_bytes(substream); ++ alsa_stream->pos = 0; ++ ++ audio_debug("buffer_size=%d, period_size=%d pos=%d frame_bits=%d\n", ++ alsa_stream->buffer_size, alsa_stream->period_size, ++ alsa_stream->pos, runtime->frame_bits); ++ ++ mutex_unlock(&chip->audio_mutex); ++ audio_info(" .. OUT\n"); ++ return 0; ++} ++ ++static void snd_bcm2835_pcm_transfer(struct snd_pcm_substream *substream, ++ struct snd_pcm_indirect *rec, size_t bytes) ++{ ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; ++ void *src = (void *)(substream->runtime->dma_area + rec->sw_data); ++ int err; ++ ++ err = bcm2835_audio_write(alsa_stream, bytes, src); ++ if (err) ++ audio_error(" Failed to transfer to alsa device (%d)\n", err); ++ ++} ++ ++static int snd_bcm2835_pcm_ack(struct snd_pcm_substream *substream) ++{ ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; ++ struct snd_pcm_indirect *pcm_indirect = &alsa_stream->pcm_indirect; ++ ++ pcm_indirect->hw_queue_size = runtime->hw.buffer_bytes_max; ++ snd_pcm_indirect_playback_transfer(substream, pcm_indirect, ++ snd_bcm2835_pcm_transfer); ++ return 0; ++} ++ ++/* trigger callback */ ++static int snd_bcm2835_pcm_trigger(struct snd_pcm_substream *substream, int cmd) ++{ ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; ++ int err = 0; ++ ++ audio_info(" .. IN\n"); ++ ++ switch (cmd) { ++ case SNDRV_PCM_TRIGGER_START: ++ audio_debug("bcm2835_AUDIO_TRIGGER_START running=%d\n", ++ alsa_stream->running); ++ if (!alsa_stream->running) { ++ err = bcm2835_audio_start(alsa_stream); ++ if (err == 0) { ++ alsa_stream->pcm_indirect.hw_io = ++ alsa_stream->pcm_indirect.hw_data = ++ bytes_to_frames(runtime, ++ alsa_stream->pos); ++ substream->ops->ack(substream); ++ alsa_stream->running = 1; ++ alsa_stream->draining = 1; ++ } else { ++ audio_error(" Failed to START alsa device (%d)\n", err); ++ } ++ } ++ break; ++ case SNDRV_PCM_TRIGGER_STOP: ++ audio_debug ++ ("bcm2835_AUDIO_TRIGGER_STOP running=%d draining=%d\n", ++ alsa_stream->running, runtime->status->state == SNDRV_PCM_STATE_DRAINING); ++ if (runtime->status->state == SNDRV_PCM_STATE_DRAINING) { ++ audio_info("DRAINING\n"); ++ alsa_stream->draining = 1; ++ } else { ++ audio_info("DROPPING\n"); ++ alsa_stream->draining = 0; ++ } ++ if (alsa_stream->running) { ++ err = bcm2835_audio_stop(alsa_stream); ++ if (err != 0) ++ audio_error(" Failed to STOP alsa device (%d)\n", err); ++ alsa_stream->running = 0; ++ } ++ break; ++ default: ++ err = -EINVAL; ++ } ++ ++ audio_info(" .. OUT\n"); ++ return err; ++} ++ ++/* pointer callback */ ++static snd_pcm_uframes_t ++snd_bcm2835_pcm_pointer(struct snd_pcm_substream *substream) ++{ ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ bcm2835_alsa_stream_t *alsa_stream = runtime->private_data; ++ ++ audio_info(" .. IN\n"); ++ ++ audio_debug("pcm_pointer... (%d) hwptr=%d appl=%d pos=%d\n", 0, ++ frames_to_bytes(runtime, runtime->status->hw_ptr), ++ frames_to_bytes(runtime, runtime->control->appl_ptr), ++ alsa_stream->pos); ++ ++ audio_info(" .. OUT\n"); ++ return snd_pcm_indirect_playback_pointer(substream, ++ &alsa_stream->pcm_indirect, ++ alsa_stream->pos); ++} ++ ++static int snd_bcm2835_pcm_lib_ioctl(struct snd_pcm_substream *substream, ++ unsigned int cmd, void *arg) ++{ ++ int ret = snd_pcm_lib_ioctl(substream, cmd, arg); ++ audio_info(" .. substream=%p, cmd=%d, arg=%p (%x) ret=%d\n", substream, ++ cmd, arg, arg ? *(unsigned *)arg : 0, ret); ++ return ret; ++} ++ ++/* operators */ ++static struct snd_pcm_ops snd_bcm2835_playback_ops = { ++ .open = snd_bcm2835_playback_open, ++ .close = snd_bcm2835_playback_close, ++ .ioctl = snd_bcm2835_pcm_lib_ioctl, ++ .hw_params = snd_bcm2835_pcm_hw_params, ++ .hw_free = snd_bcm2835_pcm_hw_free, ++ .prepare = snd_bcm2835_pcm_prepare, ++ .trigger = snd_bcm2835_pcm_trigger, ++ .pointer = snd_bcm2835_pcm_pointer, ++ .ack = snd_bcm2835_pcm_ack, ++}; ++ ++static struct snd_pcm_ops snd_bcm2835_playback_spdif_ops = { ++ .open = snd_bcm2835_playback_spdif_open, ++ .close = snd_bcm2835_playback_close, ++ .ioctl = snd_bcm2835_pcm_lib_ioctl, ++ .hw_params = snd_bcm2835_pcm_hw_params, ++ .hw_free = snd_bcm2835_pcm_hw_free, ++ .prepare = snd_bcm2835_pcm_prepare, ++ .trigger = snd_bcm2835_pcm_trigger, ++ .pointer = snd_bcm2835_pcm_pointer, ++ .ack = snd_bcm2835_pcm_ack, ++}; ++ ++/* create a pcm device */ ++int snd_bcm2835_new_pcm(bcm2835_chip_t * chip) ++{ ++ struct snd_pcm *pcm; ++ int err; ++ ++ audio_info(" .. IN\n"); ++ mutex_init(&chip->audio_mutex); ++ if(mutex_lock_interruptible(&chip->audio_mutex)) ++ { ++ audio_error("Interrupted whilst waiting for lock\n"); ++ return -EINTR; ++ } ++ err = ++ snd_pcm_new(chip->card, "bcm2835 ALSA", 0, MAX_SUBSTREAMS, 0, &pcm); ++ if (err < 0) ++ goto out; ++ pcm->private_data = chip; ++ strcpy(pcm->name, "bcm2835 ALSA"); ++ chip->pcm = pcm; ++ chip->dest = AUDIO_DEST_AUTO; ++ chip->volume = alsa2chip(0); ++ chip->mute = CTRL_VOL_UNMUTE; /*disable mute on startup */ ++ /* set operators */ ++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, ++ &snd_bcm2835_playback_ops); ++ ++ /* pre-allocation of buffers */ ++ /* NOTE: this may fail */ ++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, ++ snd_dma_continuous_data (GFP_KERNEL), ++ snd_bcm2835_playback_hw.buffer_bytes_max, snd_bcm2835_playback_hw.buffer_bytes_max); ++ ++ ++out: ++ mutex_unlock(&chip->audio_mutex); ++ audio_info(" .. OUT\n"); ++ ++ return 0; ++} ++ ++int snd_bcm2835_new_spdif_pcm(bcm2835_chip_t * chip) ++{ ++ struct snd_pcm *pcm; ++ int err; ++ ++ audio_info(" .. IN\n"); ++ if(mutex_lock_interruptible(&chip->audio_mutex)) ++ { ++ audio_error("Interrupted whilst waiting for lock\n"); ++ return -EINTR; ++ } ++ err = snd_pcm_new(chip->card, "bcm2835 ALSA", 1, 1, 0, &pcm); ++ if (err < 0) ++ goto out; ++ ++ pcm->private_data = chip; ++ strcpy(pcm->name, "bcm2835 IEC958/HDMI"); ++ chip->pcm_spdif = pcm; ++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, ++ &snd_bcm2835_playback_spdif_ops); ++ ++ /* pre-allocation of buffers */ ++ /* NOTE: this may fail */ ++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, ++ snd_dma_continuous_data (GFP_KERNEL), ++ snd_bcm2835_playback_spdif_hw.buffer_bytes_max, snd_bcm2835_playback_spdif_hw.buffer_bytes_max); ++out: ++ mutex_unlock(&chip->audio_mutex); ++ audio_info(" .. OUT\n"); ++ ++ return 0; ++} +--- /dev/null ++++ b/sound/arm/bcm2835-vchiq.c +@@ -0,0 +1,889 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "bcm2835.h" ++ ++/* ---- Include Files -------------------------------------------------------- */ ++ ++#include "interface/vchi/vchi.h" ++#include "vc_vchi_audioserv_defs.h" ++ ++/* ---- Private Constants and Types ------------------------------------------ */ ++ ++#define BCM2835_AUDIO_STOP 0 ++#define BCM2835_AUDIO_START 1 ++#define BCM2835_AUDIO_WRITE 2 ++ ++/* Logging macros (for remapping to other logging mechanisms, i.e., printf) */ ++#ifdef AUDIO_DEBUG_ENABLE ++ #define LOG_ERR( fmt, arg... ) pr_err( "%s:%d " fmt, __func__, __LINE__, ##arg) ++ #define LOG_WARN( fmt, arg... ) pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg) ++ #define LOG_INFO( fmt, arg... ) pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg) ++ #define LOG_DBG( fmt, arg... ) pr_info( "%s:%d " fmt, __func__, __LINE__, ##arg) ++#else ++ #define LOG_ERR( fmt, arg... ) pr_err( "%s:%d " fmt, __func__, __LINE__, ##arg) ++ #define LOG_WARN( fmt, arg... ) ++ #define LOG_INFO( fmt, arg... ) ++ #define LOG_DBG( fmt, arg... ) ++#endif ++ ++typedef struct opaque_AUDIO_INSTANCE_T { ++ uint32_t num_connections; ++ VCHI_SERVICE_HANDLE_T vchi_handle[VCHI_MAX_NUM_CONNECTIONS]; ++ struct completion msg_avail_comp; ++ struct mutex vchi_mutex; ++ bcm2835_alsa_stream_t *alsa_stream; ++ int32_t result; ++ short peer_version; ++} AUDIO_INSTANCE_T; ++ ++bool force_bulk = false; ++ ++/* ---- Private Variables ---------------------------------------------------- */ ++ ++/* ---- Private Function Prototypes ------------------------------------------ */ ++ ++/* ---- Private Functions ---------------------------------------------------- */ ++ ++static int bcm2835_audio_stop_worker(bcm2835_alsa_stream_t * alsa_stream); ++static int bcm2835_audio_start_worker(bcm2835_alsa_stream_t * alsa_stream); ++static int bcm2835_audio_write_worker(bcm2835_alsa_stream_t *alsa_stream, ++ uint32_t count, void *src); ++ ++typedef struct { ++ struct work_struct my_work; ++ bcm2835_alsa_stream_t *alsa_stream; ++ int cmd; ++ void *src; ++ uint32_t count; ++} my_work_t; ++ ++static void my_wq_function(struct work_struct *work) ++{ ++ my_work_t *w = (my_work_t *) work; ++ int ret = -9; ++ LOG_DBG(" .. IN %p:%d\n", w->alsa_stream, w->cmd); ++ switch (w->cmd) { ++ case BCM2835_AUDIO_START: ++ ret = bcm2835_audio_start_worker(w->alsa_stream); ++ break; ++ case BCM2835_AUDIO_STOP: ++ ret = bcm2835_audio_stop_worker(w->alsa_stream); ++ break; ++ case BCM2835_AUDIO_WRITE: ++ ret = bcm2835_audio_write_worker(w->alsa_stream, w->count, ++ w->src); ++ break; ++ default: ++ LOG_ERR(" Unexpected work: %p:%d\n", w->alsa_stream, w->cmd); ++ break; ++ } ++ kfree((void *)work); ++ LOG_DBG(" .. OUT %d\n", ret); ++} ++ ++int bcm2835_audio_start(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ int ret = -1; ++ LOG_DBG(" .. IN\n"); ++ if (alsa_stream->my_wq) { ++ my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC); ++ /*--- Queue some work (item 1) ---*/ ++ if (work) { ++ INIT_WORK((struct work_struct *)work, my_wq_function); ++ work->alsa_stream = alsa_stream; ++ work->cmd = BCM2835_AUDIO_START; ++ if (queue_work ++ (alsa_stream->my_wq, (struct work_struct *)work)) ++ ret = 0; ++ } else ++ LOG_ERR(" .. Error: NULL work kmalloc\n"); ++ } ++ LOG_DBG(" .. OUT %d\n", ret); ++ return ret; ++} ++ ++int bcm2835_audio_stop(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ int ret = -1; ++ LOG_DBG(" .. IN\n"); ++ if (alsa_stream->my_wq) { ++ my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC); ++ /*--- Queue some work (item 1) ---*/ ++ if (work) { ++ INIT_WORK((struct work_struct *)work, my_wq_function); ++ work->alsa_stream = alsa_stream; ++ work->cmd = BCM2835_AUDIO_STOP; ++ if (queue_work ++ (alsa_stream->my_wq, (struct work_struct *)work)) ++ ret = 0; ++ } else ++ LOG_ERR(" .. Error: NULL work kmalloc\n"); ++ } ++ LOG_DBG(" .. OUT %d\n", ret); ++ return ret; ++} ++ ++int bcm2835_audio_write(bcm2835_alsa_stream_t *alsa_stream, ++ uint32_t count, void *src) ++{ ++ int ret = -1; ++ LOG_DBG(" .. IN\n"); ++ if (alsa_stream->my_wq) { ++ my_work_t *work = kmalloc(sizeof(my_work_t), GFP_ATOMIC); ++ /*--- Queue some work (item 1) ---*/ ++ if (work) { ++ INIT_WORK((struct work_struct *)work, my_wq_function); ++ work->alsa_stream = alsa_stream; ++ work->cmd = BCM2835_AUDIO_WRITE; ++ work->src = src; ++ work->count = count; ++ if (queue_work ++ (alsa_stream->my_wq, (struct work_struct *)work)) ++ ret = 0; ++ } else ++ LOG_ERR(" .. Error: NULL work kmalloc\n"); ++ } ++ LOG_DBG(" .. OUT %d\n", ret); ++ return ret; ++} ++ ++void my_workqueue_init(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ alsa_stream->my_wq = alloc_workqueue("my_queue", WQ_HIGHPRI, 1); ++ return; ++} ++ ++void my_workqueue_quit(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ if (alsa_stream->my_wq) { ++ flush_workqueue(alsa_stream->my_wq); ++ destroy_workqueue(alsa_stream->my_wq); ++ alsa_stream->my_wq = NULL; ++ } ++ return; ++} ++ ++static void audio_vchi_callback(void *param, ++ const VCHI_CALLBACK_REASON_T reason, ++ void *msg_handle) ++{ ++ AUDIO_INSTANCE_T *instance = (AUDIO_INSTANCE_T *) param; ++ int32_t status; ++ int32_t msg_len; ++ VC_AUDIO_MSG_T m; ++ LOG_DBG(" .. IN instance=%p, handle=%p, alsa=%p, reason=%d, handle=%p\n", ++ instance, instance ? instance->vchi_handle[0] : NULL, instance ? instance->alsa_stream : NULL, reason, msg_handle); ++ ++ if (reason != VCHI_CALLBACK_MSG_AVAILABLE) { ++ return; ++ } ++ if (!instance) { ++ LOG_ERR(" .. instance is null\n"); ++ BUG(); ++ return; ++ } ++ if (!instance->vchi_handle[0]) { ++ LOG_ERR(" .. instance->vchi_handle[0] is null\n"); ++ BUG(); ++ return; ++ } ++ status = vchi_msg_dequeue(instance->vchi_handle[0], ++ &m, sizeof m, &msg_len, VCHI_FLAGS_NONE); ++ if (m.type == VC_AUDIO_MSG_TYPE_RESULT) { ++ LOG_DBG ++ (" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_RESULT, success=%d\n", ++ instance, m.u.result.success); ++ instance->result = m.u.result.success; ++ complete(&instance->msg_avail_comp); ++ } else if (m.type == VC_AUDIO_MSG_TYPE_COMPLETE) { ++ bcm2835_alsa_stream_t *alsa_stream = instance->alsa_stream; ++ irq_handler_t callback = (irq_handler_t) m.u.complete.callback; ++ LOG_DBG ++ (" .. instance=%p, m.type=VC_AUDIO_MSG_TYPE_COMPLETE, complete=%d\n", ++ instance, m.u.complete.count); ++ if (alsa_stream && callback) { ++ atomic_add(m.u.complete.count, &alsa_stream->retrieved); ++ callback(0, alsa_stream); ++ } else { ++ LOG_ERR(" .. unexpected alsa_stream=%p, callback=%p\n", ++ alsa_stream, callback); ++ } ++ } else { ++ LOG_ERR(" .. unexpected m.type=%d\n", m.type); ++ } ++ LOG_DBG(" .. OUT\n"); ++} ++ ++static AUDIO_INSTANCE_T *vc_vchi_audio_init(VCHI_INSTANCE_T vchi_instance, ++ VCHI_CONNECTION_T ** ++ vchi_connections, ++ uint32_t num_connections) ++{ ++ uint32_t i; ++ AUDIO_INSTANCE_T *instance; ++ int status; ++ ++ LOG_DBG("%s: start", __func__); ++ ++ if (num_connections > VCHI_MAX_NUM_CONNECTIONS) { ++ LOG_ERR("%s: unsupported number of connections %u (max=%u)\n", ++ __func__, num_connections, VCHI_MAX_NUM_CONNECTIONS); ++ ++ return NULL; ++ } ++ /* Allocate memory for this instance */ ++ instance = kmalloc(sizeof(*instance), GFP_KERNEL); ++ if (!instance) ++ return NULL; ++ ++ memset(instance, 0, sizeof(*instance)); ++ instance->num_connections = num_connections; ++ ++ /* Create a lock for exclusive, serialized VCHI connection access */ ++ mutex_init(&instance->vchi_mutex); ++ /* Open the VCHI service connections */ ++ for (i = 0; i < num_connections; i++) { ++ SERVICE_CREATION_T params = { ++ VCHI_VERSION_EX(VC_AUDIOSERV_VER, VC_AUDIOSERV_MIN_VER), ++ VC_AUDIO_SERVER_NAME, // 4cc service code ++ vchi_connections[i], // passed in fn pointers ++ 0, // rx fifo size (unused) ++ 0, // tx fifo size (unused) ++ audio_vchi_callback, // service callback ++ instance, // service callback parameter ++ 1, //TODO: remove VCOS_FALSE, // unaligned bulk recieves ++ 1, //TODO: remove VCOS_FALSE, // unaligned bulk transmits ++ 0 // want crc check on bulk transfers ++ }; ++ ++ LOG_DBG("%s: about to open %i\n", __func__, i); ++ status = vchi_service_open(vchi_instance, ¶ms, ++ &instance->vchi_handle[i]); ++ LOG_DBG("%s: opened %i: %p=%d\n", __func__, i, instance->vchi_handle[i], status); ++ if (status) { ++ LOG_ERR ++ ("%s: failed to open VCHI service connection (status=%d)\n", ++ __func__, status); ++ ++ goto err_close_services; ++ } ++ /* Finished with the service for now */ ++ vchi_service_release(instance->vchi_handle[i]); ++ } ++ ++ LOG_DBG("%s: okay\n", __func__); ++ return instance; ++ ++err_close_services: ++ for (i = 0; i < instance->num_connections; i++) { ++ LOG_ERR("%s: closing %i: %p\n", __func__, i, instance->vchi_handle[i]); ++ if (instance->vchi_handle[i]) ++ vchi_service_close(instance->vchi_handle[i]); ++ } ++ ++ kfree(instance); ++ LOG_ERR("%s: error\n", __func__); ++ ++ return NULL; ++} ++ ++static int32_t vc_vchi_audio_deinit(AUDIO_INSTANCE_T * instance) ++{ ++ uint32_t i; ++ ++ LOG_DBG(" .. IN\n"); ++ ++ if (instance == NULL) { ++ LOG_ERR("%s: invalid handle %p\n", __func__, instance); ++ ++ return -1; ++ } ++ ++ LOG_DBG(" .. about to lock (%d)\n", instance->num_connections); ++ if(mutex_lock_interruptible(&instance->vchi_mutex)) ++ { ++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); ++ return -EINTR; ++ } ++ ++ /* Close all VCHI service connections */ ++ for (i = 0; i < instance->num_connections; i++) { ++ int32_t success; ++ LOG_DBG(" .. %i:closing %p\n", i, instance->vchi_handle[i]); ++ vchi_service_use(instance->vchi_handle[i]); ++ ++ success = vchi_service_close(instance->vchi_handle[i]); ++ if (success != 0) { ++ LOG_DBG ++ ("%s: failed to close VCHI service connection (status=%d)\n", ++ __func__, success); ++ } ++ } ++ ++ mutex_unlock(&instance->vchi_mutex); ++ ++ kfree(instance); ++ ++ LOG_DBG(" .. OUT\n"); ++ ++ return 0; ++} ++ ++static int bcm2835_audio_open_connection(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ static VCHI_INSTANCE_T vchi_instance; ++ static VCHI_CONNECTION_T *vchi_connection; ++ static int initted; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ LOG_INFO("%s: start\n", __func__); ++ BUG_ON(instance); ++ if (instance) { ++ LOG_ERR("%s: VCHI instance already open (%p)\n", ++ __func__, instance); ++ instance->alsa_stream = alsa_stream; ++ alsa_stream->instance = instance; ++ ret = 0; // xxx todo -1; ++ goto err_free_mem; ++ } ++ ++ /* Initialize and create a VCHI connection */ ++ if (!initted) { ++ ret = vchi_initialise(&vchi_instance); ++ if (ret != 0) { ++ LOG_ERR("%s: failed to initialise VCHI instance (ret=%d)\n", ++ __func__, ret); ++ ++ ret = -EIO; ++ goto err_free_mem; ++ } ++ ret = vchi_connect(NULL, 0, vchi_instance); ++ if (ret != 0) { ++ LOG_ERR("%s: failed to connect VCHI instance (ret=%d)\n", ++ __func__, ret); ++ ++ ret = -EIO; ++ goto err_free_mem; ++ } ++ initted = 1; ++ } ++ ++ /* Initialize an instance of the audio service */ ++ instance = vc_vchi_audio_init(vchi_instance, &vchi_connection, 1); ++ ++ if (instance == NULL) { ++ LOG_ERR("%s: failed to initialize audio service\n", __func__); ++ ++ ret = -EPERM; ++ goto err_free_mem; ++ } ++ ++ instance->alsa_stream = alsa_stream; ++ alsa_stream->instance = instance; ++ ++ LOG_DBG(" success !\n"); ++err_free_mem: ++ LOG_DBG(" .. OUT\n"); ++ ++ return ret; ++} ++ ++int bcm2835_audio_open(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ AUDIO_INSTANCE_T *instance; ++ VC_AUDIO_MSG_T m; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ my_workqueue_init(alsa_stream); ++ ++ ret = bcm2835_audio_open_connection(alsa_stream); ++ if (ret != 0) { ++ ret = -1; ++ goto exit; ++ } ++ instance = alsa_stream->instance; ++ LOG_DBG(" instance (%p)\n", instance); ++ ++ if(mutex_lock_interruptible(&instance->vchi_mutex)) ++ { ++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); ++ return -EINTR; ++ } ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ m.type = VC_AUDIO_MSG_TYPE_OPEN; ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ mutex_unlock(&instance->vchi_mutex); ++exit: ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++static int bcm2835_audio_set_ctls_chan(bcm2835_alsa_stream_t * alsa_stream, ++ bcm2835_chip_t * chip) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ LOG_INFO ++ (" Setting ALSA dest(%d), volume(%d)\n", chip->dest, chip->volume); ++ ++ if(mutex_lock_interruptible(&instance->vchi_mutex)) ++ { ++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); ++ return -EINTR; ++ } ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ instance->result = -1; ++ ++ m.type = VC_AUDIO_MSG_TYPE_CONTROL; ++ m.u.control.dest = chip->dest; ++ m.u.control.volume = chip->volume; ++ ++ /* Create the message available completion */ ++ init_completion(&instance->msg_avail_comp); ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ /* We are expecting a reply from the videocore */ ++ wait_for_completion(&instance->msg_avail_comp); ++ ++ if (instance->result != 0) { ++ LOG_ERR("%s: result=%d\n", __func__, instance->result); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ mutex_unlock(&instance->vchi_mutex); ++ ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++int bcm2835_audio_set_ctls(bcm2835_chip_t * chip) ++{ ++ int i; ++ int ret = 0; ++ LOG_DBG(" .. IN\n"); ++ LOG_DBG(" Setting ALSA dest(%d), volume(%d)\n", chip->dest, chip->volume); ++ ++ /* change ctls for all substreams */ ++ for (i = 0; i < MAX_SUBSTREAMS; i++) { ++ if (chip->avail_substreams & (1 << i)) { ++ if (!chip->alsa_stream[i]) ++ { ++ LOG_DBG(" No ALSA stream available?! %i:%p (%x)\n", i, chip->alsa_stream[i], chip->avail_substreams); ++ ret = 0; ++ } ++ else if (bcm2835_audio_set_ctls_chan /* returns 0 on success */ ++ (chip->alsa_stream[i], chip) != 0) ++ { ++ LOG_ERR("Couldn't set the controls for stream %d\n", i); ++ ret = -1; ++ } ++ else LOG_DBG(" Controls set for stream %d\n", i); ++ } ++ } ++ LOG_DBG(" .. OUT ret=%d\n", ret); ++ return ret; ++} ++ ++int bcm2835_audio_set_params(bcm2835_alsa_stream_t * alsa_stream, ++ uint32_t channels, uint32_t samplerate, ++ uint32_t bps) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ LOG_INFO ++ (" Setting ALSA channels(%d), samplerate(%d), bits-per-sample(%d)\n", ++ channels, samplerate, bps); ++ ++ /* resend ctls - alsa_stream may not have been open when first send */ ++ ret = bcm2835_audio_set_ctls_chan(alsa_stream, alsa_stream->chip); ++ if (ret != 0) { ++ LOG_ERR(" Alsa controls not supported\n"); ++ return -EINVAL; ++ } ++ ++ if(mutex_lock_interruptible(&instance->vchi_mutex)) ++ { ++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); ++ return -EINTR; ++ } ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ instance->result = -1; ++ ++ m.type = VC_AUDIO_MSG_TYPE_CONFIG; ++ m.u.config.channels = channels; ++ m.u.config.samplerate = samplerate; ++ m.u.config.bps = bps; ++ ++ /* Create the message available completion */ ++ init_completion(&instance->msg_avail_comp); ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ /* We are expecting a reply from the videocore */ ++ wait_for_completion(&instance->msg_avail_comp); ++ ++ if (instance->result != 0) { ++ LOG_ERR("%s: result=%d", __func__, instance->result); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ mutex_unlock(&instance->vchi_mutex); ++ ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++int bcm2835_audio_setup(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ LOG_DBG(" .. IN\n"); ++ ++ LOG_DBG(" .. OUT\n"); ++ ++ return 0; ++} ++ ++static int bcm2835_audio_start_worker(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ if(mutex_lock_interruptible(&instance->vchi_mutex)) ++ { ++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); ++ return -EINTR; ++ } ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ m.type = VC_AUDIO_MSG_TYPE_START; ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ mutex_unlock(&instance->vchi_mutex); ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++static int bcm2835_audio_stop_worker(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ if(mutex_lock_interruptible(&instance->vchi_mutex)) ++ { ++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); ++ return -EINTR; ++ } ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ m.type = VC_AUDIO_MSG_TYPE_STOP; ++ m.u.stop.draining = alsa_stream->draining; ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ mutex_unlock(&instance->vchi_mutex); ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++int bcm2835_audio_close(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ LOG_DBG(" .. IN\n"); ++ ++ my_workqueue_quit(alsa_stream); ++ ++ if(mutex_lock_interruptible(&instance->vchi_mutex)) ++ { ++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); ++ return -EINTR; ++ } ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ m.type = VC_AUDIO_MSG_TYPE_CLOSE; ++ ++ /* Create the message available completion */ ++ init_completion(&instance->msg_avail_comp); ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", ++ __func__, success); ++ ret = -1; ++ goto unlock; ++ } ++ ++ /* We are expecting a reply from the videocore */ ++ wait_for_completion(&instance->msg_avail_comp); ++ ++ if (instance->result != 0) { ++ LOG_ERR("%s: failed result (result=%d)\n", ++ __func__, instance->result); ++ ++ ret = -1; ++ goto unlock; ++ } ++ ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ mutex_unlock(&instance->vchi_mutex); ++ ++ /* Stop the audio service */ ++ if (instance) { ++ vc_vchi_audio_deinit(instance); ++ alsa_stream->instance = NULL; ++ } ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++int bcm2835_audio_write_worker(bcm2835_alsa_stream_t *alsa_stream, ++ uint32_t count, void *src) ++{ ++ VC_AUDIO_MSG_T m; ++ AUDIO_INSTANCE_T *instance = alsa_stream->instance; ++ int32_t success; ++ int ret; ++ ++ LOG_DBG(" .. IN\n"); ++ ++ LOG_INFO(" Writing %d bytes from %p\n", count, src); ++ ++ if(mutex_lock_interruptible(&instance->vchi_mutex)) ++ { ++ LOG_DBG("Interrupted whilst waiting for lock on (%d)\n",instance->num_connections); ++ return -EINTR; ++ } ++ vchi_service_use(instance->vchi_handle[0]); ++ ++ if ( instance->peer_version==0 && vchi_get_peer_version(instance->vchi_handle[0], &instance->peer_version) == 0 ) { ++ LOG_DBG("%s: client version %d connected\n", __func__, instance->peer_version); ++ } ++ m.type = VC_AUDIO_MSG_TYPE_WRITE; ++ m.u.write.count = count; ++ // old version uses bulk, new version uses control ++ m.u.write.max_packet = instance->peer_version < 2 || force_bulk ? 0:4000; ++ m.u.write.callback = alsa_stream->fifo_irq_handler; ++ m.u.write.cookie = alsa_stream; ++ m.u.write.silence = src == NULL; ++ ++ /* Send the message to the videocore */ ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ &m, sizeof m, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (success != 0) { ++ LOG_ERR("%s: failed on vchi_msg_queue (status=%d)\n", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ if (!m.u.write.silence) { ++ if (m.u.write.max_packet == 0) { ++ /* Send the message to the videocore */ ++ success = vchi_bulk_queue_transmit(instance->vchi_handle[0], ++ src, count, ++ 0 * ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED ++ + ++ 1 * ++ VCHI_FLAGS_BLOCK_UNTIL_DATA_READ, ++ NULL); ++ } else { ++ while (count > 0) { ++ int bytes = min((int)m.u.write.max_packet, (int)count); ++ success = vchi_msg_queue(instance->vchi_handle[0], ++ src, bytes, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ src = (char *)src + bytes; ++ count -= bytes; ++ } ++ } ++ if (success != 0) { ++ LOG_ERR ++ ("%s: failed on vchi_bulk_queue_transmit (status=%d)\n", ++ __func__, success); ++ ++ ret = -1; ++ goto unlock; ++ } ++ } ++ ret = 0; ++ ++unlock: ++ vchi_service_release(instance->vchi_handle[0]); ++ mutex_unlock(&instance->vchi_mutex); ++ LOG_DBG(" .. OUT\n"); ++ return ret; ++} ++ ++/** ++ * Returns all buffers from arm->vc ++ */ ++void bcm2835_audio_flush_buffers(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ LOG_DBG(" .. IN\n"); ++ LOG_DBG(" .. OUT\n"); ++ return; ++} ++ ++/** ++ * Forces VC to flush(drop) its filled playback buffers and ++ * return them the us. (VC->ARM) ++ */ ++void bcm2835_audio_flush_playback_buffers(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ LOG_DBG(" .. IN\n"); ++ LOG_DBG(" .. OUT\n"); ++} ++ ++uint32_t bcm2835_audio_retrieve_buffers(bcm2835_alsa_stream_t * alsa_stream) ++{ ++ uint32_t count = atomic_read(&alsa_stream->retrieved); ++ atomic_sub(count, &alsa_stream->retrieved); ++ return count; ++} ++ ++module_param(force_bulk, bool, 0444); ++MODULE_PARM_DESC(force_bulk, "Force use of vchiq bulk for audio"); +--- /dev/null ++++ b/sound/arm/bcm2835.c +@@ -0,0 +1,511 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "bcm2835.h" ++ ++/* module parameters (see "Module Parameters") */ ++/* SNDRV_CARDS: maximum number of cards supported by this module */ ++static int index[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = -1 }; ++static char *id[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = NULL }; ++static int enable[MAX_SUBSTREAMS] = {[0 ... (MAX_SUBSTREAMS - 1)] = 1 }; ++ ++/* HACKY global pointers needed for successive probes to work : ssp ++ * But compared against the changes we will have to do in VC audio_ipc code ++ * to export 8 audio_ipc devices as a single IPC device and then monitor all ++ * four devices in a thread, this gets things done quickly and should be easier ++ * to debug if we run into issues ++ */ ++ ++static struct snd_card *g_card = NULL; ++static bcm2835_chip_t *g_chip = NULL; ++ ++static int snd_bcm2835_free(bcm2835_chip_t * chip) ++{ ++ kfree(chip); ++ return 0; ++} ++ ++/* component-destructor ++ * (see "Management of Cards and Components") ++ */ ++static int snd_bcm2835_dev_free(struct snd_device *device) ++{ ++ return snd_bcm2835_free(device->device_data); ++} ++ ++/* chip-specific constructor ++ * (see "Management of Cards and Components") ++ */ ++static int snd_bcm2835_create(struct snd_card *card, ++ struct platform_device *pdev, ++ bcm2835_chip_t ** rchip) ++{ ++ bcm2835_chip_t *chip; ++ int err; ++ static struct snd_device_ops ops = { ++ .dev_free = snd_bcm2835_dev_free, ++ }; ++ ++ *rchip = NULL; ++ ++ chip = kzalloc(sizeof(*chip), GFP_KERNEL); ++ if (chip == NULL) ++ return -ENOMEM; ++ ++ chip->card = card; ++ ++ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); ++ if (err < 0) { ++ snd_bcm2835_free(chip); ++ return err; ++ } ++ ++ *rchip = chip; ++ return 0; ++} ++ ++static int snd_bcm2835_alsa_probe_dt(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ bcm2835_chip_t *chip; ++ struct snd_card *card; ++ u32 numchans; ++ int err, i; ++ ++ err = of_property_read_u32(dev->of_node, "brcm,pwm-channels", ++ &numchans); ++ if (err) { ++ dev_err(dev, "Failed to get DT property 'brcm,pwm-channels'"); ++ return err; ++ } ++ ++ if (numchans == 0 || numchans > MAX_SUBSTREAMS) { ++ numchans = MAX_SUBSTREAMS; ++ dev_warn(dev, "Illegal 'brcm,pwm-channels' value, will use %u\n", ++ numchans); ++ } ++ ++ err = snd_card_new(&pdev->dev, -1, NULL, THIS_MODULE, 0, &card); ++ if (err) { ++ dev_err(dev, "Failed to create soundcard structure\n"); ++ return err; ++ } ++ ++ snd_card_set_dev(card, dev); ++ strcpy(card->driver, "bcm2835"); ++ strcpy(card->shortname, "bcm2835 ALSA"); ++ sprintf(card->longname, "%s", card->shortname); ++ ++ err = snd_bcm2835_create(card, pdev, &chip); ++ if (err < 0) { ++ dev_err(dev, "Failed to create bcm2835 chip\n"); ++ goto err_free; ++ } ++ ++ err = snd_bcm2835_new_pcm(chip); ++ if (err < 0) { ++ dev_err(dev, "Failed to create new bcm2835 pcm device\n"); ++ goto err_free; ++ } ++ ++ err = snd_bcm2835_new_spdif_pcm(chip); ++ if (err < 0) { ++ dev_err(dev, "Failed to create new bcm2835 spdif pcm device\n"); ++ goto err_free; ++ } ++ ++ err = snd_bcm2835_new_ctl(chip); ++ if (err < 0) { ++ dev_err(dev, "Failed to create new bcm2835 ctl\n"); ++ goto err_free; ++ } ++ ++ for (i = 0; i < numchans; i++) { ++ chip->avail_substreams |= (1 << i); ++ chip->pdev[i] = pdev; ++ } ++ ++ err = snd_card_register(card); ++ if (err) { ++ dev_err(dev, "Failed to register bcm2835 ALSA card \n"); ++ goto err_free; ++ } ++ ++ g_card = card; ++ g_chip = chip; ++ platform_set_drvdata(pdev, card); ++ audio_info("bcm2835 ALSA card created with %u channels\n", numchans); ++ ++ return 0; ++ ++err_free: ++ snd_card_free(card); ++ ++ return err; ++} ++ ++static int snd_bcm2835_alsa_probe(struct platform_device *pdev) ++{ ++ static int dev; ++ bcm2835_chip_t *chip; ++ struct snd_card *card; ++ int err; ++ ++ if (pdev->dev.of_node) ++ return snd_bcm2835_alsa_probe_dt(pdev); ++ ++ if (dev >= MAX_SUBSTREAMS) ++ return -ENODEV; ++ ++ if (!enable[dev]) { ++ dev++; ++ return -ENOENT; ++ } ++ ++ if (dev > 0) ++ goto add_register_map; ++ ++ err = snd_card_new(&pdev->dev, index[dev], id[dev], THIS_MODULE, 0, &g_card); ++ if (err < 0) ++ goto out; ++ ++ snd_card_set_dev(g_card, &pdev->dev); ++ strcpy(g_card->driver, "bcm2835"); ++ strcpy(g_card->shortname, "bcm2835 ALSA"); ++ sprintf(g_card->longname, "%s", g_card->shortname); ++ ++ err = snd_bcm2835_create(g_card, pdev, &chip); ++ if (err < 0) { ++ dev_err(&pdev->dev, "Failed to create bcm2835 chip\n"); ++ goto out_bcm2835_create; ++ } ++ ++ g_chip = chip; ++ err = snd_bcm2835_new_pcm(chip); ++ if (err < 0) { ++ dev_err(&pdev->dev, "Failed to create new BCM2835 pcm device\n"); ++ goto out_bcm2835_new_pcm; ++ } ++ ++ err = snd_bcm2835_new_spdif_pcm(chip); ++ if (err < 0) { ++ dev_err(&pdev->dev, "Failed to create new BCM2835 spdif pcm device\n"); ++ goto out_bcm2835_new_spdif; ++ } ++ ++ err = snd_bcm2835_new_ctl(chip); ++ if (err < 0) { ++ dev_err(&pdev->dev, "Failed to create new BCM2835 ctl\n"); ++ goto out_bcm2835_new_ctl; ++ } ++ ++add_register_map: ++ card = g_card; ++ chip = g_chip; ++ ++ BUG_ON(!(card && chip)); ++ ++ chip->avail_substreams |= (1 << dev); ++ chip->pdev[dev] = pdev; ++ ++ if (dev == 0) { ++ err = snd_card_register(card); ++ if (err < 0) { ++ dev_err(&pdev->dev, ++ "Failed to register bcm2835 ALSA card \n"); ++ goto out_card_register; ++ } ++ platform_set_drvdata(pdev, card); ++ audio_info("bcm2835 ALSA card created!\n"); ++ } else { ++ audio_info("bcm2835 ALSA chip created!\n"); ++ platform_set_drvdata(pdev, (void *)dev); ++ } ++ ++ dev++; ++ ++ return 0; ++ ++out_card_register: ++out_bcm2835_new_ctl: ++out_bcm2835_new_spdif: ++out_bcm2835_new_pcm: ++out_bcm2835_create: ++ BUG_ON(!g_card); ++ if (snd_card_free(g_card)) ++ dev_err(&pdev->dev, "Failed to free Registered alsa card\n"); ++ g_card = NULL; ++out: ++ dev = SNDRV_CARDS; /* stop more avail_substreams from being probed */ ++ dev_err(&pdev->dev, "BCM2835 ALSA Probe failed !!\n"); ++ return err; ++} ++ ++static int snd_bcm2835_alsa_remove(struct platform_device *pdev) ++{ ++ uint32_t idx; ++ void *drv_data; ++ ++ drv_data = platform_get_drvdata(pdev); ++ ++ if (drv_data == (void *)g_card) { ++ /* This is the card device */ ++ snd_card_free((struct snd_card *)drv_data); ++ g_card = NULL; ++ g_chip = NULL; ++ } else { ++ idx = (uint32_t) drv_data; ++ if (g_card != NULL) { ++ BUG_ON(!g_chip); ++ /* We pass chip device numbers in audio ipc devices ++ * other than the one we registered our card with ++ */ ++ idx = (uint32_t) drv_data; ++ BUG_ON(!idx || idx > MAX_SUBSTREAMS); ++ g_chip->avail_substreams &= ~(1 << idx); ++ /* There should be atleast one substream registered ++ * after we are done here, as it wil be removed when ++ * the *remove* is called for the card device ++ */ ++ BUG_ON(!g_chip->avail_substreams); ++ } ++ } ++ ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++static int snd_bcm2835_alsa_suspend(struct platform_device *pdev, ++ pm_message_t state) ++{ ++ return 0; ++} ++ ++static int snd_bcm2835_alsa_resume(struct platform_device *pdev) ++{ ++ return 0; ++} ++ ++#endif ++ ++static const struct of_device_id snd_bcm2835_of_match_table[] = { ++ { .compatible = "brcm,bcm2835-audio", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table); ++ ++static struct platform_driver bcm2835_alsa0_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD0", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_bcm2835_of_match_table, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa1_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD1", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa2_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD2", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa3_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD3", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa4_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD4", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa5_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD5", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa6_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD6", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static struct platform_driver bcm2835_alsa7_driver = { ++ .probe = snd_bcm2835_alsa_probe, ++ .remove = snd_bcm2835_alsa_remove, ++#ifdef CONFIG_PM ++ .suspend = snd_bcm2835_alsa_suspend, ++ .resume = snd_bcm2835_alsa_resume, ++#endif ++ .driver = { ++ .name = "bcm2835_AUD7", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int bcm2835_alsa_device_init(void) ++{ ++ int err; ++ err = platform_driver_register(&bcm2835_alsa0_driver); ++ if (err) { ++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); ++ goto out; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa1_driver); ++ if (err) { ++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); ++ goto unregister_0; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa2_driver); ++ if (err) { ++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); ++ goto unregister_1; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa3_driver); ++ if (err) { ++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); ++ goto unregister_2; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa4_driver); ++ if (err) { ++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); ++ goto unregister_3; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa5_driver); ++ if (err) { ++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); ++ goto unregister_4; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa6_driver); ++ if (err) { ++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); ++ goto unregister_5; ++ } ++ ++ err = platform_driver_register(&bcm2835_alsa7_driver); ++ if (err) { ++ pr_err("Error registering bcm2835_alsa0_driver %d .\n", err); ++ goto unregister_6; ++ } ++ ++ return 0; ++ ++unregister_6: ++ platform_driver_unregister(&bcm2835_alsa6_driver); ++unregister_5: ++ platform_driver_unregister(&bcm2835_alsa5_driver); ++unregister_4: ++ platform_driver_unregister(&bcm2835_alsa4_driver); ++unregister_3: ++ platform_driver_unregister(&bcm2835_alsa3_driver); ++unregister_2: ++ platform_driver_unregister(&bcm2835_alsa2_driver); ++unregister_1: ++ platform_driver_unregister(&bcm2835_alsa1_driver); ++unregister_0: ++ platform_driver_unregister(&bcm2835_alsa0_driver); ++out: ++ return err; ++} ++ ++static void bcm2835_alsa_device_exit(void) ++{ ++ platform_driver_unregister(&bcm2835_alsa0_driver); ++ platform_driver_unregister(&bcm2835_alsa1_driver); ++ platform_driver_unregister(&bcm2835_alsa2_driver); ++ platform_driver_unregister(&bcm2835_alsa3_driver); ++ platform_driver_unregister(&bcm2835_alsa4_driver); ++ platform_driver_unregister(&bcm2835_alsa5_driver); ++ platform_driver_unregister(&bcm2835_alsa6_driver); ++ platform_driver_unregister(&bcm2835_alsa7_driver); ++} ++ ++late_initcall(bcm2835_alsa_device_init); ++module_exit(bcm2835_alsa_device_exit); ++ ++MODULE_AUTHOR("Dom Cobley"); ++MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:bcm2835_alsa"); +--- /dev/null ++++ b/sound/arm/bcm2835.h +@@ -0,0 +1,167 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#ifndef __SOUND_ARM_BCM2835_H ++#define __SOUND_ARM_BCM2835_H ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* ++#define AUDIO_DEBUG_ENABLE ++#define AUDIO_VERBOSE_DEBUG_ENABLE ++*/ ++ ++/* Debug macros */ ++ ++#ifdef AUDIO_DEBUG_ENABLE ++#ifdef AUDIO_VERBOSE_DEBUG_ENABLE ++ ++#define audio_debug(fmt, arg...) \ ++ printk(KERN_INFO"%s:%d " fmt, __func__, __LINE__, ##arg) ++ ++#define audio_info(fmt, arg...) \ ++ printk(KERN_INFO"%s:%d " fmt, __func__, __LINE__, ##arg) ++ ++#else ++ ++#define audio_debug(fmt, arg...) ++ ++#define audio_info(fmt, arg...) ++ ++#endif /* AUDIO_VERBOSE_DEBUG_ENABLE */ ++ ++#else ++ ++#define audio_debug(fmt, arg...) ++ ++#define audio_info(fmt, arg...) ++ ++#endif /* AUDIO_DEBUG_ENABLE */ ++ ++#define audio_error(fmt, arg...) \ ++ printk(KERN_ERR"%s:%d " fmt, __func__, __LINE__, ##arg) ++ ++#define audio_warning(fmt, arg...) \ ++ printk(KERN_WARNING"%s:%d " fmt, __func__, __LINE__, ##arg) ++ ++#define audio_alert(fmt, arg...) \ ++ printk(KERN_ALERT"%s:%d " fmt, __func__, __LINE__, ##arg) ++ ++#define MAX_SUBSTREAMS (8) ++#define AVAIL_SUBSTREAMS_MASK (0xff) ++enum { ++ CTRL_VOL_MUTE, ++ CTRL_VOL_UNMUTE ++}; ++ ++/* macros for alsa2chip and chip2alsa, instead of functions */ ++ ++#define alsa2chip(vol) (uint)(-((vol << 8) / 100)) /* convert alsa to chip volume (defined as macro rather than function call) */ ++#define chip2alsa(vol) -((vol * 100) >> 8) /* convert chip to alsa volume */ ++ ++/* Some constants for values .. */ ++typedef enum { ++ AUDIO_DEST_AUTO = 0, ++ AUDIO_DEST_HEADPHONES = 1, ++ AUDIO_DEST_HDMI = 2, ++ AUDIO_DEST_MAX, ++} SND_BCM2835_ROUTE_T; ++ ++typedef enum { ++ PCM_PLAYBACK_VOLUME, ++ PCM_PLAYBACK_MUTE, ++ PCM_PLAYBACK_DEVICE, ++} SND_BCM2835_CTRL_T; ++ ++/* definition of the chip-specific record */ ++typedef struct bcm2835_chip { ++ struct snd_card *card; ++ struct snd_pcm *pcm; ++ struct snd_pcm *pcm_spdif; ++ /* Bitmat for valid reg_base and irq numbers */ ++ uint32_t avail_substreams; ++ struct platform_device *pdev[MAX_SUBSTREAMS]; ++ struct bcm2835_alsa_stream *alsa_stream[MAX_SUBSTREAMS]; ++ ++ int volume; ++ int old_volume; /* stores the volume value whist muted */ ++ int dest; ++ int mute; ++ ++ unsigned int opened; ++ unsigned int spdif_status; ++ struct mutex audio_mutex; ++} bcm2835_chip_t; ++ ++typedef struct bcm2835_alsa_stream { ++ bcm2835_chip_t *chip; ++ struct snd_pcm_substream *substream; ++ struct snd_pcm_indirect pcm_indirect; ++ ++ struct semaphore buffers_update_sem; ++ struct semaphore control_sem; ++ spinlock_t lock; ++ volatile uint32_t control; ++ volatile uint32_t status; ++ ++ int open; ++ int running; ++ int draining; ++ ++ int channels; ++ int params_rate; ++ int pcm_format_width; ++ ++ unsigned int pos; ++ unsigned int buffer_size; ++ unsigned int period_size; ++ ++ uint32_t enable_fifo_irq; ++ irq_handler_t fifo_irq_handler; ++ ++ atomic_t retrieved; ++ struct opaque_AUDIO_INSTANCE_T *instance; ++ struct workqueue_struct *my_wq; ++ int idx; ++} bcm2835_alsa_stream_t; ++ ++int snd_bcm2835_new_ctl(bcm2835_chip_t * chip); ++int snd_bcm2835_new_pcm(bcm2835_chip_t * chip); ++int snd_bcm2835_new_spdif_pcm(bcm2835_chip_t * chip); ++ ++int bcm2835_audio_open(bcm2835_alsa_stream_t * alsa_stream); ++int bcm2835_audio_close(bcm2835_alsa_stream_t * alsa_stream); ++int bcm2835_audio_set_params(bcm2835_alsa_stream_t * alsa_stream, ++ uint32_t channels, uint32_t samplerate, ++ uint32_t bps); ++int bcm2835_audio_setup(bcm2835_alsa_stream_t * alsa_stream); ++int bcm2835_audio_start(bcm2835_alsa_stream_t * alsa_stream); ++int bcm2835_audio_stop(bcm2835_alsa_stream_t * alsa_stream); ++int bcm2835_audio_set_ctls(bcm2835_chip_t * chip); ++int bcm2835_audio_write(bcm2835_alsa_stream_t * alsa_stream, uint32_t count, ++ void *src); ++uint32_t bcm2835_audio_retrieve_buffers(bcm2835_alsa_stream_t * alsa_stream); ++void bcm2835_audio_flush_buffers(bcm2835_alsa_stream_t * alsa_stream); ++void bcm2835_audio_flush_playback_buffers(bcm2835_alsa_stream_t * alsa_stream); ++ ++#endif /* __SOUND_ARM_BCM2835_H */ +--- /dev/null ++++ b/sound/arm/vc_vchi_audioserv_defs.h +@@ -0,0 +1,116 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#ifndef _VC_AUDIO_DEFS_H_ ++#define _VC_AUDIO_DEFS_H_ ++ ++#define VC_AUDIOSERV_MIN_VER 1 ++#define VC_AUDIOSERV_VER 2 ++ ++// FourCC code used for VCHI connection ++#define VC_AUDIO_SERVER_NAME MAKE_FOURCC("AUDS") ++ ++// Maximum message length ++#define VC_AUDIO_MAX_MSG_LEN (sizeof( VC_AUDIO_MSG_T )) ++ ++// List of screens that are currently supported ++// All message types supported for HOST->VC direction ++typedef enum { ++ VC_AUDIO_MSG_TYPE_RESULT, // Generic result ++ VC_AUDIO_MSG_TYPE_COMPLETE, // Generic result ++ VC_AUDIO_MSG_TYPE_CONFIG, // Configure audio ++ VC_AUDIO_MSG_TYPE_CONTROL, // Configure audio ++ VC_AUDIO_MSG_TYPE_OPEN, // Configure audio ++ VC_AUDIO_MSG_TYPE_CLOSE, // Configure audio ++ VC_AUDIO_MSG_TYPE_START, // Configure audio ++ VC_AUDIO_MSG_TYPE_STOP, // Configure audio ++ VC_AUDIO_MSG_TYPE_WRITE, // Configure audio ++ VC_AUDIO_MSG_TYPE_MAX ++} VC_AUDIO_MSG_TYPE; ++ ++// configure the audio ++typedef struct { ++ uint32_t channels; ++ uint32_t samplerate; ++ uint32_t bps; ++ ++} VC_AUDIO_CONFIG_T; ++ ++typedef struct { ++ uint32_t volume; ++ uint32_t dest; ++ ++} VC_AUDIO_CONTROL_T; ++ ++// audio ++typedef struct { ++ uint32_t dummy; ++ ++} VC_AUDIO_OPEN_T; ++ ++// audio ++typedef struct { ++ uint32_t dummy; ++ ++} VC_AUDIO_CLOSE_T; ++// audio ++typedef struct { ++ uint32_t dummy; ++ ++} VC_AUDIO_START_T; ++// audio ++typedef struct { ++ uint32_t draining; ++ ++} VC_AUDIO_STOP_T; ++ ++// configure the write audio samples ++typedef struct { ++ uint32_t count; // in bytes ++ void *callback; ++ void *cookie; ++ uint16_t silence; ++ uint16_t max_packet; ++} VC_AUDIO_WRITE_T; ++ ++// Generic result for a request (VC->HOST) ++typedef struct { ++ int32_t success; // Success value ++ ++} VC_AUDIO_RESULT_T; ++ ++// Generic result for a request (VC->HOST) ++typedef struct { ++ int32_t count; // Success value ++ void *callback; ++ void *cookie; ++} VC_AUDIO_COMPLETE_T; ++ ++// Message header for all messages in HOST->VC direction ++typedef struct { ++ int32_t type; // Message type (VC_AUDIO_MSG_TYPE) ++ union { ++ VC_AUDIO_CONFIG_T config; ++ VC_AUDIO_CONTROL_T control; ++ VC_AUDIO_OPEN_T open; ++ VC_AUDIO_CLOSE_T close; ++ VC_AUDIO_START_T start; ++ VC_AUDIO_STOP_T stop; ++ VC_AUDIO_WRITE_T write; ++ VC_AUDIO_RESULT_T result; ++ VC_AUDIO_COMPLETE_T complete; ++ } u; ++} VC_AUDIO_MSG_T; ++ ++#endif // _VC_AUDIO_DEFS_H_ diff --git a/target/linux/brcm2708/patches-4.9/950-0039-vc_mem-Add-vc_mem-driver-for-querying-firmware-memor.patch b/target/linux/brcm2708/patches-4.9/950-0039-vc_mem-Add-vc_mem-driver-for-querying-firmware-memor.patch new file mode 100644 index 000000000000..6a22bdf97025 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0039-vc_mem-Add-vc_mem-driver-for-querying-firmware-memor.patch @@ -0,0 +1,516 @@ +From 94c0e75bc85ad2a034c501b6d3640b880b9c3bb7 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Fri, 28 Oct 2016 15:36:43 +0100 +Subject: [PATCH] vc_mem: Add vc_mem driver for querying firmware memory + addresses +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: popcornmix + +BCM270x: Move vc_mem + +Make the vc_mem module available for ARCH_BCM2835 by moving it. + +Signed-off-by: Noralf Trønnes +--- + drivers/char/broadcom/Kconfig | 12 +- + drivers/char/broadcom/Makefile | 1 + + drivers/char/broadcom/vc_mem.c | 422 ++++++++++++++++++++++++++++++++++++++++ + include/linux/broadcom/vc_mem.h | 35 ++++ + 4 files changed, 469 insertions(+), 1 deletion(-) + create mode 100644 drivers/char/broadcom/vc_mem.c + create mode 100644 include/linux/broadcom/vc_mem.h + +--- a/drivers/char/broadcom/Kconfig ++++ b/drivers/char/broadcom/Kconfig +@@ -7,9 +7,19 @@ menuconfig BRCM_CHAR_DRIVERS + help + Broadcom's char drivers + ++if BRCM_CHAR_DRIVERS ++ + config BCM_VC_CMA + bool "Videocore CMA" +- depends on CMA && BRCM_CHAR_DRIVERS && BCM2708_VCHIQ ++ depends on CMA && BCM2708_VCHIQ + default n + help + Helper for videocore CMA access. ++ ++config BCM2708_VCMEM ++ bool "Videocore Memory" ++ default y ++ help ++ Helper for videocore memory access and total size allocation. ++ ++endif +--- a/drivers/char/broadcom/Makefile ++++ b/drivers/char/broadcom/Makefile +@@ -1 +1,2 @@ + obj-$(CONFIG_BCM_VC_CMA) += vc_cma/ ++obj-$(CONFIG_BCM2708_VCMEM) += vc_mem.o +--- /dev/null ++++ b/drivers/char/broadcom/vc_mem.c +@@ -0,0 +1,422 @@ ++/***************************************************************************** ++* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define DRIVER_NAME "vc-mem" ++ ++// Device (/dev) related variables ++static dev_t vc_mem_devnum = 0; ++static struct class *vc_mem_class = NULL; ++static struct cdev vc_mem_cdev; ++static int vc_mem_inited = 0; ++ ++#ifdef CONFIG_DEBUG_FS ++static struct dentry *vc_mem_debugfs_entry; ++#endif ++ ++/* ++ * Videocore memory addresses and size ++ * ++ * Drivers that wish to know the videocore memory addresses and sizes should ++ * use these variables instead of the MM_IO_BASE and MM_ADDR_IO defines in ++ * headers. This allows the other drivers to not be tied down to a a certain ++ * address/size at compile time. ++ * ++ * In the future, the goal is to have the videocore memory virtual address and ++ * size be calculated at boot time rather than at compile time. The decision of ++ * where the videocore memory resides and its size would be in the hands of the ++ * bootloader (and/or kernel). When that happens, the values of these variables ++ * would be calculated and assigned in the init function. ++ */ ++// in the 2835 VC in mapped above ARM, but ARM has full access to VC space ++unsigned long mm_vc_mem_phys_addr = 0x00000000; ++unsigned int mm_vc_mem_size = 0; ++unsigned int mm_vc_mem_base = 0; ++ ++EXPORT_SYMBOL(mm_vc_mem_phys_addr); ++EXPORT_SYMBOL(mm_vc_mem_size); ++EXPORT_SYMBOL(mm_vc_mem_base); ++ ++static uint phys_addr = 0; ++static uint mem_size = 0; ++static uint mem_base = 0; ++ ++ ++/**************************************************************************** ++* ++* vc_mem_open ++* ++***************************************************************************/ ++ ++static int ++vc_mem_open(struct inode *inode, struct file *file) ++{ ++ (void) inode; ++ (void) file; ++ ++ pr_debug("%s: called file = 0x%p\n", __func__, file); ++ ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* vc_mem_release ++* ++***************************************************************************/ ++ ++static int ++vc_mem_release(struct inode *inode, struct file *file) ++{ ++ (void) inode; ++ (void) file; ++ ++ pr_debug("%s: called file = 0x%p\n", __func__, file); ++ ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* vc_mem_get_size ++* ++***************************************************************************/ ++ ++static void ++vc_mem_get_size(void) ++{ ++} ++ ++/**************************************************************************** ++* ++* vc_mem_get_base ++* ++***************************************************************************/ ++ ++static void ++vc_mem_get_base(void) ++{ ++} ++ ++/**************************************************************************** ++* ++* vc_mem_get_current_size ++* ++***************************************************************************/ ++ ++int ++vc_mem_get_current_size(void) ++{ ++ return mm_vc_mem_size; ++} ++ ++EXPORT_SYMBOL_GPL(vc_mem_get_current_size); ++ ++/**************************************************************************** ++* ++* vc_mem_ioctl ++* ++***************************************************************************/ ++ ++static long ++vc_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ int rc = 0; ++ ++ (void) cmd; ++ (void) arg; ++ ++ pr_debug("%s: called file = 0x%p\n", __func__, file); ++ ++ switch (cmd) { ++ case VC_MEM_IOC_MEM_PHYS_ADDR: ++ { ++ pr_debug("%s: VC_MEM_IOC_MEM_PHYS_ADDR=0x%p\n", ++ __func__, (void *) mm_vc_mem_phys_addr); ++ ++ if (copy_to_user((void *) arg, &mm_vc_mem_phys_addr, ++ sizeof (mm_vc_mem_phys_addr)) != 0) { ++ rc = -EFAULT; ++ } ++ break; ++ } ++ case VC_MEM_IOC_MEM_SIZE: ++ { ++ // Get the videocore memory size first ++ vc_mem_get_size(); ++ ++ pr_debug("%s: VC_MEM_IOC_MEM_SIZE=%u\n", __func__, ++ mm_vc_mem_size); ++ ++ if (copy_to_user((void *) arg, &mm_vc_mem_size, ++ sizeof (mm_vc_mem_size)) != 0) { ++ rc = -EFAULT; ++ } ++ break; ++ } ++ case VC_MEM_IOC_MEM_BASE: ++ { ++ // Get the videocore memory base ++ vc_mem_get_base(); ++ ++ pr_debug("%s: VC_MEM_IOC_MEM_BASE=%u\n", __func__, ++ mm_vc_mem_base); ++ ++ if (copy_to_user((void *) arg, &mm_vc_mem_base, ++ sizeof (mm_vc_mem_base)) != 0) { ++ rc = -EFAULT; ++ } ++ break; ++ } ++ case VC_MEM_IOC_MEM_LOAD: ++ { ++ // Get the videocore memory base ++ vc_mem_get_base(); ++ ++ pr_debug("%s: VC_MEM_IOC_MEM_LOAD=%u\n", __func__, ++ mm_vc_mem_base); ++ ++ if (copy_to_user((void *) arg, &mm_vc_mem_base, ++ sizeof (mm_vc_mem_base)) != 0) { ++ rc = -EFAULT; ++ } ++ break; ++ } ++ default: ++ { ++ return -ENOTTY; ++ } ++ } ++ pr_debug("%s: file = 0x%p returning %d\n", __func__, file, rc); ++ ++ return rc; ++} ++ ++/**************************************************************************** ++* ++* vc_mem_mmap ++* ++***************************************************************************/ ++ ++static int ++vc_mem_mmap(struct file *filp, struct vm_area_struct *vma) ++{ ++ int rc = 0; ++ unsigned long length = vma->vm_end - vma->vm_start; ++ unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; ++ ++ pr_debug("%s: vm_start = 0x%08lx vm_end = 0x%08lx vm_pgoff = 0x%08lx\n", ++ __func__, (long) vma->vm_start, (long) vma->vm_end, ++ (long) vma->vm_pgoff); ++ ++ if (offset + length > mm_vc_mem_size) { ++ pr_err("%s: length %ld is too big\n", __func__, length); ++ return -EINVAL; ++ } ++ // Do not cache the memory map ++ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); ++ ++ rc = remap_pfn_range(vma, vma->vm_start, ++ (mm_vc_mem_phys_addr >> PAGE_SHIFT) + ++ vma->vm_pgoff, length, vma->vm_page_prot); ++ if (rc != 0) { ++ pr_err("%s: remap_pfn_range failed (rc=%d)\n", __func__, rc); ++ } ++ ++ return rc; ++} ++ ++/**************************************************************************** ++* ++* File Operations for the driver. ++* ++***************************************************************************/ ++ ++static const struct file_operations vc_mem_fops = { ++ .owner = THIS_MODULE, ++ .open = vc_mem_open, ++ .release = vc_mem_release, ++ .unlocked_ioctl = vc_mem_ioctl, ++ .mmap = vc_mem_mmap, ++}; ++ ++#ifdef CONFIG_DEBUG_FS ++static void vc_mem_debugfs_deinit(void) ++{ ++ debugfs_remove_recursive(vc_mem_debugfs_entry); ++ vc_mem_debugfs_entry = NULL; ++} ++ ++ ++static int vc_mem_debugfs_init( ++ struct device *dev) ++{ ++ vc_mem_debugfs_entry = debugfs_create_dir(DRIVER_NAME, NULL); ++ if (!vc_mem_debugfs_entry) { ++ dev_warn(dev, "could not create debugfs entry\n"); ++ return -EFAULT; ++ } ++ ++ if (!debugfs_create_x32("vc_mem_phys_addr", ++ 0444, ++ vc_mem_debugfs_entry, ++ (u32 *)&mm_vc_mem_phys_addr)) { ++ dev_warn(dev, "%s:could not create vc_mem_phys entry\n", ++ __func__); ++ goto fail; ++ } ++ ++ if (!debugfs_create_x32("vc_mem_size", ++ 0444, ++ vc_mem_debugfs_entry, ++ (u32 *)&mm_vc_mem_size)) { ++ dev_warn(dev, "%s:could not create vc_mem_size entry\n", ++ __func__); ++ goto fail; ++ } ++ ++ if (!debugfs_create_x32("vc_mem_base", ++ 0444, ++ vc_mem_debugfs_entry, ++ (u32 *)&mm_vc_mem_base)) { ++ dev_warn(dev, "%s:could not create vc_mem_base entry\n", ++ __func__); ++ goto fail; ++ } ++ ++ return 0; ++ ++fail: ++ vc_mem_debugfs_deinit(); ++ return -EFAULT; ++} ++ ++#endif /* CONFIG_DEBUG_FS */ ++ ++ ++/**************************************************************************** ++* ++* vc_mem_init ++* ++***************************************************************************/ ++ ++static int __init ++vc_mem_init(void) ++{ ++ int rc = -EFAULT; ++ struct device *dev; ++ ++ pr_debug("%s: called\n", __func__); ++ ++ mm_vc_mem_phys_addr = phys_addr; ++ mm_vc_mem_size = mem_size; ++ mm_vc_mem_base = mem_base; ++ ++ vc_mem_get_size(); ++ ++ pr_info("vc-mem: phys_addr:0x%08lx mem_base=0x%08x mem_size:0x%08x(%u MiB)\n", ++ mm_vc_mem_phys_addr, mm_vc_mem_base, mm_vc_mem_size, mm_vc_mem_size / (1024 * 1024)); ++ ++ if ((rc = alloc_chrdev_region(&vc_mem_devnum, 0, 1, DRIVER_NAME)) < 0) { ++ pr_err("%s: alloc_chrdev_region failed (rc=%d)\n", ++ __func__, rc); ++ goto out_err; ++ } ++ ++ cdev_init(&vc_mem_cdev, &vc_mem_fops); ++ if ((rc = cdev_add(&vc_mem_cdev, vc_mem_devnum, 1)) != 0) { ++ pr_err("%s: cdev_add failed (rc=%d)\n", __func__, rc); ++ goto out_unregister; ++ } ++ ++ vc_mem_class = class_create(THIS_MODULE, DRIVER_NAME); ++ if (IS_ERR(vc_mem_class)) { ++ rc = PTR_ERR(vc_mem_class); ++ pr_err("%s: class_create failed (rc=%d)\n", __func__, rc); ++ goto out_cdev_del; ++ } ++ ++ dev = device_create(vc_mem_class, NULL, vc_mem_devnum, NULL, ++ DRIVER_NAME); ++ if (IS_ERR(dev)) { ++ rc = PTR_ERR(dev); ++ pr_err("%s: device_create failed (rc=%d)\n", __func__, rc); ++ goto out_class_destroy; ++ } ++ ++#ifdef CONFIG_DEBUG_FS ++ /* don't fail if the debug entries cannot be created */ ++ vc_mem_debugfs_init(dev); ++#endif ++ ++ vc_mem_inited = 1; ++ return 0; ++ ++ device_destroy(vc_mem_class, vc_mem_devnum); ++ ++ out_class_destroy: ++ class_destroy(vc_mem_class); ++ vc_mem_class = NULL; ++ ++ out_cdev_del: ++ cdev_del(&vc_mem_cdev); ++ ++ out_unregister: ++ unregister_chrdev_region(vc_mem_devnum, 1); ++ ++ out_err: ++ return -1; ++} ++ ++/**************************************************************************** ++* ++* vc_mem_exit ++* ++***************************************************************************/ ++ ++static void __exit ++vc_mem_exit(void) ++{ ++ pr_debug("%s: called\n", __func__); ++ ++ if (vc_mem_inited) { ++#if CONFIG_DEBUG_FS ++ vc_mem_debugfs_deinit(); ++#endif ++ device_destroy(vc_mem_class, vc_mem_devnum); ++ class_destroy(vc_mem_class); ++ cdev_del(&vc_mem_cdev); ++ unregister_chrdev_region(vc_mem_devnum, 1); ++ } ++} ++ ++module_init(vc_mem_init); ++module_exit(vc_mem_exit); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Broadcom Corporation"); ++ ++module_param(phys_addr, uint, 0644); ++module_param(mem_size, uint, 0644); ++module_param(mem_base, uint, 0644); +--- /dev/null ++++ b/include/linux/broadcom/vc_mem.h +@@ -0,0 +1,35 @@ ++/***************************************************************************** ++* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#ifndef _VC_MEM_H ++#define _VC_MEM_H ++ ++#include ++ ++#define VC_MEM_IOC_MAGIC 'v' ++ ++#define VC_MEM_IOC_MEM_PHYS_ADDR _IOR( VC_MEM_IOC_MAGIC, 0, unsigned long ) ++#define VC_MEM_IOC_MEM_SIZE _IOR( VC_MEM_IOC_MAGIC, 1, unsigned int ) ++#define VC_MEM_IOC_MEM_BASE _IOR( VC_MEM_IOC_MAGIC, 2, unsigned int ) ++#define VC_MEM_IOC_MEM_LOAD _IOR( VC_MEM_IOC_MAGIC, 3, unsigned int ) ++ ++#if defined( __KERNEL__ ) ++#define VC_MEM_TO_ARM_ADDR_MASK 0x3FFFFFFF ++ ++extern unsigned long mm_vc_mem_phys_addr; ++extern unsigned int mm_vc_mem_size; ++extern int vc_mem_get_current_size( void ); ++#endif ++ ++#endif /* _VC_MEM_H */ diff --git a/target/linux/brcm2708/patches-4.9/950-0040-vcsm-VideoCore-shared-memory-service-for-BCM2835.patch b/target/linux/brcm2708/patches-4.9/950-0040-vcsm-VideoCore-shared-memory-service-for-BCM2835.patch new file mode 100644 index 000000000000..ff1cfad30a45 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0040-vcsm-VideoCore-shared-memory-service-for-BCM2835.patch @@ -0,0 +1,4384 @@ +From b62c07606f1673e2e0b9e70ce89e48fc240a7ee1 Mon Sep 17 00:00:00 2001 +From: Tim Gover +Date: Tue, 22 Jul 2014 15:41:04 +0100 +Subject: [PATCH] vcsm: VideoCore shared memory service for BCM2835 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add experimental support for the VideoCore shared memory service. +This allows user processes to allocate memory from VideoCore's +GPU relocatable heap and mmap the buffers. Additionally, the memory +handles can passed to other VideoCore services such as MMAL, OpenMax +and DispmanX + +TODO +* This driver was originally released for BCM28155 which has a different + cache architecture to BCM2835. Consequently, in this release only + uncached mappings are supported. However, there's no fundamental + reason which cached mappings cannot be support or BCM2835 +* More refactoring is required to remove the typedefs. +* Re-enable the some of the commented out debug-fs statistics which were + disabled when migrating code from proc-fs. +* There's a lot of code to support sharing of VCSM in order to support + Android. This could probably done more cleanly or perhaps just + removed. + +Signed-off-by: Tim Gover + +config: Disable VC_SM for now to fix hang with cutdown kernel + +vcsm: Use boolean as it cannot be built as module + +On building the bcm_vc_sm as a module we get the following error: + +v7_dma_flush_range and do_munmap are undefined in vc-sm.ko. + +Fix by making it not an option to build as module + +vcsm: Add ioctl for custom cache flushing + +vc-sm: Move headers out of arch directory + +Signed-off-by: Noralf Trønnes +--- + drivers/char/broadcom/Kconfig | 9 + + drivers/char/broadcom/Makefile | 1 + + drivers/char/broadcom/vc_sm/Makefile | 9 + + drivers/char/broadcom/vc_sm/vc_sm_defs.h | 181 ++ + drivers/char/broadcom/vc_sm/vc_sm_knl.h | 55 + + drivers/char/broadcom/vc_sm/vc_vchi_sm.c | 492 +++++ + drivers/char/broadcom/vc_sm/vc_vchi_sm.h | 82 + + drivers/char/broadcom/vc_sm/vmcs_sm.c | 3213 ++++++++++++++++++++++++++++++ + include/linux/broadcom/vmcs_sm_ioctl.h | 248 +++ + 9 files changed, 4290 insertions(+) + create mode 100644 drivers/char/broadcom/vc_sm/Makefile + create mode 100644 drivers/char/broadcom/vc_sm/vc_sm_defs.h + create mode 100644 drivers/char/broadcom/vc_sm/vc_sm_knl.h + create mode 100644 drivers/char/broadcom/vc_sm/vc_vchi_sm.c + create mode 100644 drivers/char/broadcom/vc_sm/vc_vchi_sm.h + create mode 100644 drivers/char/broadcom/vc_sm/vmcs_sm.c + create mode 100644 include/linux/broadcom/vmcs_sm_ioctl.h + +--- a/drivers/char/broadcom/Kconfig ++++ b/drivers/char/broadcom/Kconfig +@@ -23,3 +23,12 @@ config BCM2708_VCMEM + Helper for videocore memory access and total size allocation. + + endif ++ ++config BCM_VC_SM ++ bool "VMCS Shared Memory" ++ depends on BCM2708_VCHIQ ++ select BCM2708_VCMEM ++ default n ++ help ++ Support for the VC shared memory on the Broadcom reference ++ design. Uses the VCHIQ stack. +--- a/drivers/char/broadcom/Makefile ++++ b/drivers/char/broadcom/Makefile +@@ -1,2 +1,3 @@ + obj-$(CONFIG_BCM_VC_CMA) += vc_cma/ + obj-$(CONFIG_BCM2708_VCMEM) += vc_mem.o ++obj-$(CONFIG_BCM_VC_SM) += vc_sm/ +--- /dev/null ++++ b/drivers/char/broadcom/vc_sm/Makefile +@@ -0,0 +1,9 @@ ++ccflags-$(CONFIG_BCM_VC_SM) += -Werror -Wall -Wstrict-prototypes -Wno-trigraphs -O2 ++ccflags-$(CONFIG_BCM_VC_SM) += -I"drivers/staging/vc04_services" -I"drivers/staging/vc04_services/interface/vchi" -I"drivers/staging/vc04_services/interface/vchiq_arm" -I"$(srctree)/fs/" ++ccflags-$(CONFIG_BCM_VC_SM) += -DOS_ASSERT_FAILURE -D__STDC_VERSION=199901L -D__STDC_VERSION__=199901L -D__VCCOREVER__=0 -D__KERNEL__ -D__linux__ ++ ++obj-$(CONFIG_BCM_VC_SM) := vc-sm.o ++ ++vc-sm-objs := \ ++ vmcs_sm.o \ ++ vc_vchi_sm.o +--- /dev/null ++++ b/drivers/char/broadcom/vc_sm/vc_sm_defs.h +@@ -0,0 +1,181 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#ifndef __VC_SM_DEFS_H__INCLUDED__ ++#define __VC_SM_DEFS_H__INCLUDED__ ++ ++/* FourCC code used for VCHI connection */ ++#define VC_SM_SERVER_NAME MAKE_FOURCC("SMEM") ++ ++/* Maximum message length */ ++#define VC_SM_MAX_MSG_LEN (sizeof(VC_SM_MSG_UNION_T) + \ ++ sizeof(VC_SM_MSG_HDR_T)) ++#define VC_SM_MAX_RSP_LEN (sizeof(VC_SM_MSG_UNION_T)) ++ ++/* Resource name maximum size */ ++#define VC_SM_RESOURCE_NAME 32 ++ ++/* All message types supported for HOST->VC direction */ ++typedef enum { ++ /* Allocate shared memory block */ ++ VC_SM_MSG_TYPE_ALLOC, ++ /* Lock allocated shared memory block */ ++ VC_SM_MSG_TYPE_LOCK, ++ /* Unlock allocated shared memory block */ ++ VC_SM_MSG_TYPE_UNLOCK, ++ /* Unlock allocated shared memory block, do not answer command */ ++ VC_SM_MSG_TYPE_UNLOCK_NOANS, ++ /* Free shared memory block */ ++ VC_SM_MSG_TYPE_FREE, ++ /* Resize a shared memory block */ ++ VC_SM_MSG_TYPE_RESIZE, ++ /* Walk the allocated shared memory block(s) */ ++ VC_SM_MSG_TYPE_WALK_ALLOC, ++ ++ /* A previously applied action will need to be reverted */ ++ VC_SM_MSG_TYPE_ACTION_CLEAN, ++ VC_SM_MSG_TYPE_MAX ++} VC_SM_MSG_TYPE; ++ ++/* Type of memory to be allocated */ ++typedef enum { ++ VC_SM_ALLOC_CACHED, ++ VC_SM_ALLOC_NON_CACHED, ++ ++} VC_SM_ALLOC_TYPE_T; ++ ++/* Message header for all messages in HOST->VC direction */ ++typedef struct { ++ int32_t type; ++ uint32_t trans_id; ++ uint8_t body[0]; ++ ++} VC_SM_MSG_HDR_T; ++ ++/* Request to allocate memory (HOST->VC) */ ++typedef struct { ++ /* type of memory to allocate */ ++ VC_SM_ALLOC_TYPE_T type; ++ /* byte amount of data to allocate per unit */ ++ uint32_t base_unit; ++ /* number of unit to allocate */ ++ uint32_t num_unit; ++ /* alignement to be applied on allocation */ ++ uint32_t alignement; ++ /* identity of who allocated this block */ ++ uint32_t allocator; ++ /* resource name (for easier tracking on vc side) */ ++ char name[VC_SM_RESOURCE_NAME]; ++ ++} VC_SM_ALLOC_T; ++ ++/* Result of a requested memory allocation (VC->HOST) */ ++typedef struct { ++ /* Transaction identifier */ ++ uint32_t trans_id; ++ ++ /* Resource handle */ ++ uint32_t res_handle; ++ /* Pointer to resource buffer */ ++ void *res_mem; ++ /* Resource base size (bytes) */ ++ uint32_t res_base_size; ++ /* Resource number */ ++ uint32_t res_num; ++ ++} VC_SM_ALLOC_RESULT_T; ++ ++/* Request to free a previously allocated memory (HOST->VC) */ ++typedef struct { ++ /* Resource handle (returned from alloc) */ ++ uint32_t res_handle; ++ /* Resource buffer (returned from alloc) */ ++ void *res_mem; ++ ++} VC_SM_FREE_T; ++ ++/* Request to lock a previously allocated memory (HOST->VC) */ ++typedef struct { ++ /* Resource handle (returned from alloc) */ ++ uint32_t res_handle; ++ /* Resource buffer (returned from alloc) */ ++ void *res_mem; ++ ++} VC_SM_LOCK_UNLOCK_T; ++ ++/* Request to resize a previously allocated memory (HOST->VC) */ ++typedef struct { ++ /* Resource handle (returned from alloc) */ ++ uint32_t res_handle; ++ /* Resource buffer (returned from alloc) */ ++ void *res_mem; ++ /* Resource *new* size requested (bytes) */ ++ uint32_t res_new_size; ++ ++} VC_SM_RESIZE_T; ++ ++/* Result of a requested memory lock (VC->HOST) */ ++typedef struct { ++ /* Transaction identifier */ ++ uint32_t trans_id; ++ ++ /* Resource handle */ ++ uint32_t res_handle; ++ /* Pointer to resource buffer */ ++ void *res_mem; ++ /* Pointer to former resource buffer if the memory ++ * was reallocated */ ++ void *res_old_mem; ++ ++} VC_SM_LOCK_RESULT_T; ++ ++/* Generic result for a request (VC->HOST) */ ++typedef struct { ++ /* Transaction identifier */ ++ uint32_t trans_id; ++ ++ int32_t success; ++ ++} VC_SM_RESULT_T; ++ ++/* Request to revert a previously applied action (HOST->VC) */ ++typedef struct { ++ /* Action of interest */ ++ VC_SM_MSG_TYPE res_action; ++ /* Transaction identifier for the action of interest */ ++ uint32_t action_trans_id; ++ ++} VC_SM_ACTION_CLEAN_T; ++ ++/* Request to remove all data associated with a given allocator (HOST->VC) */ ++typedef struct { ++ /* Allocator identifier */ ++ uint32_t allocator; ++ ++} VC_SM_FREE_ALL_T; ++ ++/* Union of ALL messages */ ++typedef union { ++ VC_SM_ALLOC_T alloc; ++ VC_SM_ALLOC_RESULT_T alloc_result; ++ VC_SM_FREE_T free; ++ VC_SM_ACTION_CLEAN_T action_clean; ++ VC_SM_RESIZE_T resize; ++ VC_SM_LOCK_RESULT_T lock_result; ++ VC_SM_RESULT_T result; ++ VC_SM_FREE_ALL_T free_all; ++ ++} VC_SM_MSG_UNION_T; ++ ++#endif /* __VC_SM_DEFS_H__INCLUDED__ */ +--- /dev/null ++++ b/drivers/char/broadcom/vc_sm/vc_sm_knl.h +@@ -0,0 +1,55 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#ifndef __VC_SM_KNL_H__INCLUDED__ ++#define __VC_SM_KNL_H__INCLUDED__ ++ ++#if !defined(__KERNEL__) ++#error "This interface is for kernel use only..." ++#endif ++ ++/* Type of memory to be locked (ie mapped) */ ++typedef enum { ++ VC_SM_LOCK_CACHED, ++ VC_SM_LOCK_NON_CACHED, ++ ++} VC_SM_LOCK_CACHE_MODE_T; ++ ++/* Allocate a shared memory handle and block. ++*/ ++int vc_sm_alloc(VC_SM_ALLOC_T *alloc, int *handle); ++ ++/* Free a previously allocated shared memory handle and block. ++*/ ++int vc_sm_free(int handle); ++ ++/* Lock a memory handle for use by kernel. ++*/ ++int vc_sm_lock(int handle, VC_SM_LOCK_CACHE_MODE_T mode, ++ long unsigned int *data); ++ ++/* Unlock a memory handle in use by kernel. ++*/ ++int vc_sm_unlock(int handle, int flush, int no_vc_unlock); ++ ++/* Get an internal resource handle mapped from the external one. ++*/ ++int vc_sm_int_handle(int handle); ++ ++/* Map a shared memory region for use by kernel. ++*/ ++int vc_sm_map(int handle, unsigned int sm_addr, VC_SM_LOCK_CACHE_MODE_T mode, ++ long unsigned int *data); ++ ++#endif /* __VC_SM_KNL_H__INCLUDED__ */ +--- /dev/null ++++ b/drivers/char/broadcom/vc_sm/vc_vchi_sm.c +@@ -0,0 +1,492 @@ ++/***************************************************************************** ++* Copyright 2011-2012 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++/* ---- Include Files ----------------------------------------------------- */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "vc_vchi_sm.h" ++ ++#define VC_SM_VER 1 ++#define VC_SM_MIN_VER 0 ++ ++/* ---- Private Constants and Types -------------------------------------- */ ++ ++/* Command blocks come from a pool */ ++#define SM_MAX_NUM_CMD_RSP_BLKS 32 ++ ++struct sm_cmd_rsp_blk { ++ struct list_head head; /* To create lists */ ++ struct semaphore sema; /* To be signaled when the response is there */ ++ ++ uint16_t id; ++ uint16_t length; ++ ++ uint8_t msg[VC_SM_MAX_MSG_LEN]; ++ ++ uint32_t wait:1; ++ uint32_t sent:1; ++ uint32_t alloc:1; ++ ++}; ++ ++struct sm_instance { ++ uint32_t num_connections; ++ VCHI_SERVICE_HANDLE_T vchi_handle[VCHI_MAX_NUM_CONNECTIONS]; ++ struct task_struct *io_thread; ++ struct semaphore io_sema; ++ ++ uint32_t trans_id; ++ ++ struct mutex lock; ++ struct list_head cmd_list; ++ struct list_head rsp_list; ++ struct list_head dead_list; ++ ++ struct sm_cmd_rsp_blk free_blk[SM_MAX_NUM_CMD_RSP_BLKS]; ++ struct list_head free_list; ++ struct mutex free_lock; ++ struct semaphore free_sema; ++ ++}; ++ ++/* ---- Private Variables ------------------------------------------------ */ ++ ++/* ---- Private Function Prototypes -------------------------------------- */ ++ ++/* ---- Private Functions ------------------------------------------------ */ ++static struct ++sm_cmd_rsp_blk *vc_vchi_cmd_create(struct sm_instance *instance, ++ VC_SM_MSG_TYPE id, void *msg, ++ uint32_t size, int wait) ++{ ++ struct sm_cmd_rsp_blk *blk; ++ VC_SM_MSG_HDR_T *hdr; ++ ++ if (down_interruptible(&instance->free_sema)) { ++ blk = kmalloc(sizeof(*blk), GFP_KERNEL); ++ if (!blk) ++ return NULL; ++ ++ blk->alloc = 1; ++ sema_init(&blk->sema, 0); ++ } else { ++ mutex_lock(&instance->free_lock); ++ blk = ++ list_first_entry(&instance->free_list, ++ struct sm_cmd_rsp_blk, head); ++ list_del(&blk->head); ++ mutex_unlock(&instance->free_lock); ++ } ++ ++ blk->sent = 0; ++ blk->wait = wait; ++ blk->length = sizeof(*hdr) + size; ++ ++ hdr = (VC_SM_MSG_HDR_T *) blk->msg; ++ hdr->type = id; ++ mutex_lock(&instance->lock); ++ hdr->trans_id = blk->id = ++instance->trans_id; ++ mutex_unlock(&instance->lock); ++ ++ if (size) ++ memcpy(hdr->body, msg, size); ++ ++ return blk; ++} ++ ++static void ++vc_vchi_cmd_delete(struct sm_instance *instance, struct sm_cmd_rsp_blk *blk) ++{ ++ if (blk->alloc) { ++ kfree(blk); ++ return; ++ } ++ ++ mutex_lock(&instance->free_lock); ++ list_add(&blk->head, &instance->free_list); ++ mutex_unlock(&instance->free_lock); ++ up(&instance->free_sema); ++} ++ ++static int vc_vchi_sm_videocore_io(void *arg) ++{ ++ struct sm_instance *instance = arg; ++ struct sm_cmd_rsp_blk *cmd = NULL, *cmd_tmp; ++ VC_SM_RESULT_T *reply; ++ uint32_t reply_len; ++ int32_t status; ++ int svc_use = 1; ++ ++ while (1) { ++ if (svc_use) ++ vchi_service_release(instance->vchi_handle[0]); ++ svc_use = 0; ++ if (!down_interruptible(&instance->io_sema)) { ++ vchi_service_use(instance->vchi_handle[0]); ++ svc_use = 1; ++ ++ do { ++ unsigned int flags; ++ /* ++ * Get new command and move it to response list ++ */ ++ mutex_lock(&instance->lock); ++ if (list_empty(&instance->cmd_list)) { ++ /* no more commands to process */ ++ mutex_unlock(&instance->lock); ++ break; ++ } ++ cmd = ++ list_first_entry(&instance->cmd_list, ++ struct sm_cmd_rsp_blk, ++ head); ++ list_move(&cmd->head, &instance->rsp_list); ++ cmd->sent = 1; ++ mutex_unlock(&instance->lock); ++ ++ /* Send the command */ ++ flags = VCHI_FLAGS_BLOCK_UNTIL_QUEUED; ++ status = vchi_msg_queue( ++ instance->vchi_handle[0], ++ cmd->msg, cmd->length, ++ flags, NULL); ++ if (status) { ++ pr_err("%s: failed to queue message (%d)", ++ __func__, status); ++ } ++ ++ /* If no reply is needed then we're done */ ++ if (!cmd->wait) { ++ mutex_lock(&instance->lock); ++ list_del(&cmd->head); ++ mutex_unlock(&instance->lock); ++ vc_vchi_cmd_delete(instance, cmd); ++ continue; ++ } ++ ++ if (status) { ++ up(&cmd->sema); ++ continue; ++ } ++ ++ } while (1); ++ ++ while (!vchi_msg_peek ++ (instance->vchi_handle[0], (void **)&reply, ++ &reply_len, VCHI_FLAGS_NONE)) { ++ mutex_lock(&instance->lock); ++ list_for_each_entry(cmd, &instance->rsp_list, ++ head) { ++ if (cmd->id == reply->trans_id) ++ break; ++ } ++ mutex_unlock(&instance->lock); ++ ++ if (&cmd->head == &instance->rsp_list) { ++ pr_debug("%s: received response %u, throw away...", ++ __func__, reply->trans_id); ++ } else if (reply_len > sizeof(cmd->msg)) { ++ pr_err("%s: reply too big (%u) %u, throw away...", ++ __func__, reply_len, ++ reply->trans_id); ++ } else { ++ memcpy(cmd->msg, reply, reply_len); ++ up(&cmd->sema); ++ } ++ ++ vchi_msg_remove(instance->vchi_handle[0]); ++ } ++ ++ /* Go through the dead list and free them */ ++ mutex_lock(&instance->lock); ++ list_for_each_entry_safe(cmd, cmd_tmp, ++ &instance->dead_list, head) { ++ list_del(&cmd->head); ++ vc_vchi_cmd_delete(instance, cmd); ++ } ++ mutex_unlock(&instance->lock); ++ } ++ } ++ ++ return 0; ++} ++ ++static void vc_sm_vchi_callback(void *param, ++ const VCHI_CALLBACK_REASON_T reason, ++ void *msg_handle) ++{ ++ struct sm_instance *instance = param; ++ ++ (void)msg_handle; ++ ++ switch (reason) { ++ case VCHI_CALLBACK_MSG_AVAILABLE: ++ up(&instance->io_sema); ++ break; ++ ++ case VCHI_CALLBACK_SERVICE_CLOSED: ++ pr_info("%s: service CLOSED!!", __func__); ++ default: ++ break; ++ } ++} ++ ++VC_VCHI_SM_HANDLE_T vc_vchi_sm_init(VCHI_INSTANCE_T vchi_instance, ++ VCHI_CONNECTION_T **vchi_connections, ++ uint32_t num_connections) ++{ ++ uint32_t i; ++ struct sm_instance *instance; ++ int status; ++ ++ pr_debug("%s: start", __func__); ++ ++ if (num_connections > VCHI_MAX_NUM_CONNECTIONS) { ++ pr_err("%s: unsupported number of connections %u (max=%u)", ++ __func__, num_connections, VCHI_MAX_NUM_CONNECTIONS); ++ ++ goto err_null; ++ } ++ /* Allocate memory for this instance */ ++ instance = kzalloc(sizeof(*instance), GFP_KERNEL); ++ ++ /* Misc initialisations */ ++ mutex_init(&instance->lock); ++ sema_init(&instance->io_sema, 0); ++ INIT_LIST_HEAD(&instance->cmd_list); ++ INIT_LIST_HEAD(&instance->rsp_list); ++ INIT_LIST_HEAD(&instance->dead_list); ++ INIT_LIST_HEAD(&instance->free_list); ++ sema_init(&instance->free_sema, SM_MAX_NUM_CMD_RSP_BLKS); ++ mutex_init(&instance->free_lock); ++ for (i = 0; i < SM_MAX_NUM_CMD_RSP_BLKS; i++) { ++ sema_init(&instance->free_blk[i].sema, 0); ++ list_add(&instance->free_blk[i].head, &instance->free_list); ++ } ++ ++ /* Open the VCHI service connections */ ++ instance->num_connections = num_connections; ++ for (i = 0; i < num_connections; i++) { ++ SERVICE_CREATION_T params = { ++ VCHI_VERSION_EX(VC_SM_VER, VC_SM_MIN_VER), ++ VC_SM_SERVER_NAME, ++ vchi_connections[i], ++ 0, ++ 0, ++ vc_sm_vchi_callback, ++ instance, ++ 0, ++ 0, ++ 0, ++ }; ++ ++ status = vchi_service_open(vchi_instance, ++ ¶ms, &instance->vchi_handle[i]); ++ if (status) { ++ pr_err("%s: failed to open VCHI service (%d)", ++ __func__, status); ++ ++ goto err_close_services; ++ } ++ } ++ ++ /* Create the thread which takes care of all io to/from videoocore. */ ++ instance->io_thread = kthread_create(&vc_vchi_sm_videocore_io, ++ (void *)instance, "SMIO"); ++ if (instance->io_thread == NULL) { ++ pr_err("%s: failed to create SMIO thread", __func__); ++ ++ goto err_close_services; ++ } ++ set_user_nice(instance->io_thread, -10); ++ wake_up_process(instance->io_thread); ++ ++ pr_debug("%s: success - instance 0x%x", __func__, (unsigned)instance); ++ return instance; ++ ++err_close_services: ++ for (i = 0; i < instance->num_connections; i++) { ++ if (instance->vchi_handle[i] != NULL) ++ vchi_service_close(instance->vchi_handle[i]); ++ } ++ kfree(instance); ++err_null: ++ pr_debug("%s: FAILED", __func__); ++ return NULL; ++} ++ ++int vc_vchi_sm_stop(VC_VCHI_SM_HANDLE_T *handle) ++{ ++ struct sm_instance *instance; ++ uint32_t i; ++ ++ if (handle == NULL) { ++ pr_err("%s: invalid pointer to handle %p", __func__, handle); ++ goto lock; ++ } ++ ++ if (*handle == NULL) { ++ pr_err("%s: invalid handle %p", __func__, *handle); ++ goto lock; ++ } ++ ++ instance = *handle; ++ ++ /* Close all VCHI service connections */ ++ for (i = 0; i < instance->num_connections; i++) { ++ int32_t success; ++ vchi_service_use(instance->vchi_handle[i]); ++ ++ success = vchi_service_close(instance->vchi_handle[i]); ++ } ++ ++ kfree(instance); ++ ++ *handle = NULL; ++ return 0; ++ ++lock: ++ return -EINVAL; ++} ++ ++int vc_vchi_sm_send_msg(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_MSG_TYPE msg_id, ++ void *msg, uint32_t msg_size, ++ void *result, uint32_t result_size, ++ uint32_t *cur_trans_id, uint8_t wait_reply) ++{ ++ int status = 0; ++ struct sm_instance *instance = handle; ++ struct sm_cmd_rsp_blk *cmd_blk; ++ ++ if (handle == NULL) { ++ pr_err("%s: invalid handle", __func__); ++ return -EINVAL; ++ } ++ if (msg == NULL) { ++ pr_err("%s: invalid msg pointer", __func__); ++ return -EINVAL; ++ } ++ ++ cmd_blk = ++ vc_vchi_cmd_create(instance, msg_id, msg, msg_size, wait_reply); ++ if (cmd_blk == NULL) { ++ pr_err("[%s]: failed to allocate global tracking resource", ++ __func__); ++ return -ENOMEM; ++ } ++ ++ if (cur_trans_id != NULL) ++ *cur_trans_id = cmd_blk->id; ++ ++ mutex_lock(&instance->lock); ++ list_add_tail(&cmd_blk->head, &instance->cmd_list); ++ mutex_unlock(&instance->lock); ++ up(&instance->io_sema); ++ ++ if (!wait_reply) ++ /* We're done */ ++ return 0; ++ ++ /* Wait for the response */ ++ if (down_interruptible(&cmd_blk->sema)) { ++ mutex_lock(&instance->lock); ++ if (!cmd_blk->sent) { ++ list_del(&cmd_blk->head); ++ mutex_unlock(&instance->lock); ++ vc_vchi_cmd_delete(instance, cmd_blk); ++ return -ENXIO; ++ } ++ mutex_unlock(&instance->lock); ++ ++ mutex_lock(&instance->lock); ++ list_move(&cmd_blk->head, &instance->dead_list); ++ mutex_unlock(&instance->lock); ++ up(&instance->io_sema); ++ return -EINTR; /* We're done */ ++ } ++ ++ if (result && result_size) { ++ memcpy(result, cmd_blk->msg, result_size); ++ } else { ++ VC_SM_RESULT_T *res = (VC_SM_RESULT_T *) cmd_blk->msg; ++ status = (res->success == 0) ? 0 : -ENXIO; ++ } ++ ++ mutex_lock(&instance->lock); ++ list_del(&cmd_blk->head); ++ mutex_unlock(&instance->lock); ++ vc_vchi_cmd_delete(instance, cmd_blk); ++ return status; ++} ++ ++int vc_vchi_sm_alloc(VC_VCHI_SM_HANDLE_T handle, VC_SM_ALLOC_T *msg, ++ VC_SM_ALLOC_RESULT_T *result, uint32_t *cur_trans_id) ++{ ++ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_ALLOC, ++ msg, sizeof(*msg), result, sizeof(*result), ++ cur_trans_id, 1); ++} ++ ++int vc_vchi_sm_free(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_FREE_T *msg, uint32_t *cur_trans_id) ++{ ++ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_FREE, ++ msg, sizeof(*msg), 0, 0, cur_trans_id, 0); ++} ++ ++int vc_vchi_sm_lock(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_LOCK_UNLOCK_T *msg, ++ VC_SM_LOCK_RESULT_T *result, uint32_t *cur_trans_id) ++{ ++ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_LOCK, ++ msg, sizeof(*msg), result, sizeof(*result), ++ cur_trans_id, 1); ++} ++ ++int vc_vchi_sm_unlock(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_LOCK_UNLOCK_T *msg, ++ uint32_t *cur_trans_id, uint8_t wait_reply) ++{ ++ return vc_vchi_sm_send_msg(handle, wait_reply ? ++ VC_SM_MSG_TYPE_UNLOCK : ++ VC_SM_MSG_TYPE_UNLOCK_NOANS, msg, ++ sizeof(*msg), 0, 0, cur_trans_id, ++ wait_reply); ++} ++ ++int vc_vchi_sm_resize(VC_VCHI_SM_HANDLE_T handle, VC_SM_RESIZE_T *msg, ++ uint32_t *cur_trans_id) ++{ ++ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_RESIZE, ++ msg, sizeof(*msg), 0, 0, cur_trans_id, 1); ++} ++ ++int vc_vchi_sm_walk_alloc(VC_VCHI_SM_HANDLE_T handle) ++{ ++ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_WALK_ALLOC, ++ 0, 0, 0, 0, 0, 0); ++} ++ ++int vc_vchi_sm_clean_up(VC_VCHI_SM_HANDLE_T handle, VC_SM_ACTION_CLEAN_T *msg) ++{ ++ return vc_vchi_sm_send_msg(handle, VC_SM_MSG_TYPE_ACTION_CLEAN, ++ msg, sizeof(*msg), 0, 0, 0, 0); ++} +--- /dev/null ++++ b/drivers/char/broadcom/vc_sm/vc_vchi_sm.h +@@ -0,0 +1,82 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#ifndef __VC_VCHI_SM_H__INCLUDED__ ++#define __VC_VCHI_SM_H__INCLUDED__ ++ ++#include "interface/vchi/vchi.h" ++ ++#include "vc_sm_defs.h" ++ ++/* Forward declare. ++*/ ++typedef struct sm_instance *VC_VCHI_SM_HANDLE_T; ++ ++/* Initialize the shared memory service, opens up vchi connection to talk to it. ++*/ ++VC_VCHI_SM_HANDLE_T vc_vchi_sm_init(VCHI_INSTANCE_T vchi_instance, ++ VCHI_CONNECTION_T **vchi_connections, ++ uint32_t num_connections); ++ ++/* Terminates the shared memory service. ++*/ ++int vc_vchi_sm_stop(VC_VCHI_SM_HANDLE_T *handle); ++ ++/* Ask the shared memory service to allocate some memory on videocre and ++** return the result of this allocation (which upon success will be a pointer ++** to some memory in videocore space). ++*/ ++int vc_vchi_sm_alloc(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_ALLOC_T *alloc, ++ VC_SM_ALLOC_RESULT_T *alloc_result, uint32_t *trans_id); ++ ++/* Ask the shared memory service to free up some memory that was previously ++** allocated by the vc_vchi_sm_alloc function call. ++*/ ++int vc_vchi_sm_free(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_FREE_T *free, uint32_t *trans_id); ++ ++/* Ask the shared memory service to lock up some memory that was previously ++** allocated by the vc_vchi_sm_alloc function call. ++*/ ++int vc_vchi_sm_lock(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_LOCK_UNLOCK_T *lock_unlock, ++ VC_SM_LOCK_RESULT_T *lock_result, uint32_t *trans_id); ++ ++/* Ask the shared memory service to unlock some memory that was previously ++** allocated by the vc_vchi_sm_alloc function call. ++*/ ++int vc_vchi_sm_unlock(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_LOCK_UNLOCK_T *lock_unlock, ++ uint32_t *trans_id, uint8_t wait_reply); ++ ++/* Ask the shared memory service to resize some memory that was previously ++** allocated by the vc_vchi_sm_alloc function call. ++*/ ++int vc_vchi_sm_resize(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_RESIZE_T *resize, uint32_t *trans_id); ++ ++/* Walk the allocated resources on the videocore side, the allocation will ++** show up in the log. This is purely for debug/information and takes no ++** specific actions. ++*/ ++int vc_vchi_sm_walk_alloc(VC_VCHI_SM_HANDLE_T handle); ++ ++/* Clean up following a previously interrupted action which left the system ++** in a bad state of some sort. ++*/ ++int vc_vchi_sm_clean_up(VC_VCHI_SM_HANDLE_T handle, ++ VC_SM_ACTION_CLEAN_T *action_clean); ++ ++#endif /* __VC_VCHI_SM_H__INCLUDED__ */ +--- /dev/null ++++ b/drivers/char/broadcom/vc_sm/vmcs_sm.c +@@ -0,0 +1,3213 @@ ++/***************************************************************************** ++* Copyright 2011-2012 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++/* ---- Include Files ----------------------------------------------------- */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "vchiq_connected.h" ++#include "vc_vchi_sm.h" ++ ++#include ++#include "vc_sm_knl.h" ++ ++/* ---- Private Constants and Types --------------------------------------- */ ++ ++#define DEVICE_NAME "vcsm" ++#define DEVICE_MINOR 0 ++ ++#define VC_SM_DIR_ROOT_NAME "vc-smem" ++#define VC_SM_DIR_ALLOC_NAME "alloc" ++#define VC_SM_STATE "state" ++#define VC_SM_STATS "statistics" ++#define VC_SM_RESOURCES "resources" ++#define VC_SM_DEBUG "debug" ++#define VC_SM_WRITE_BUF_SIZE 128 ++ ++/* Statistics tracked per resource and globally. ++*/ ++enum SM_STATS_T { ++ /* Attempt. */ ++ ALLOC, ++ FREE, ++ LOCK, ++ UNLOCK, ++ MAP, ++ FLUSH, ++ INVALID, ++ ++ END_ATTEMPT, ++ ++ /* Failure. */ ++ ALLOC_FAIL, ++ FREE_FAIL, ++ LOCK_FAIL, ++ UNLOCK_FAIL, ++ MAP_FAIL, ++ FLUSH_FAIL, ++ INVALID_FAIL, ++ ++ END_ALL, ++ ++}; ++ ++static const char *const sm_stats_human_read[] = { ++ "Alloc", ++ "Free", ++ "Lock", ++ "Unlock", ++ "Map", ++ "Cache Flush", ++ "Cache Invalidate", ++}; ++ ++typedef int (*VC_SM_SHOW) (struct seq_file *s, void *v); ++struct SM_PDE_T { ++ VC_SM_SHOW show; /* Debug fs function hookup. */ ++ struct dentry *dir_entry; /* Debug fs directory entry. */ ++ void *priv_data; /* Private data */ ++ ++}; ++ ++/* Single resource allocation tracked for all devices. ++*/ ++struct sm_mmap { ++ struct list_head map_list; /* Linked list of maps. */ ++ ++ struct SM_RESOURCE_T *resource; /* Pointer to the resource. */ ++ ++ pid_t res_pid; /* PID owning that resource. */ ++ unsigned int res_vc_hdl; /* Resource handle (videocore). */ ++ unsigned int res_usr_hdl; /* Resource handle (user). */ ++ ++ long unsigned int res_addr; /* Mapped virtual address. */ ++ struct vm_area_struct *vma; /* VM area for this mapping. */ ++ unsigned int ref_count; /* Reference count to this vma. */ ++ ++ /* Used to link maps associated with a resource. */ ++ struct list_head resource_map_list; ++}; ++ ++/* Single resource allocation tracked for each opened device. ++*/ ++struct SM_RESOURCE_T { ++ struct list_head resource_list; /* List of resources. */ ++ struct list_head global_resource_list; /* Global list of resources. */ ++ ++ pid_t pid; /* PID owning that resource. */ ++ uint32_t res_guid; /* Unique identifier. */ ++ uint32_t lock_count; /* Lock count for this resource. */ ++ uint32_t ref_count; /* Ref count for this resource. */ ++ ++ uint32_t res_handle; /* Resource allocation handle. */ ++ void *res_base_mem; /* Resource base memory address. */ ++ uint32_t res_size; /* Resource size allocated. */ ++ enum vmcs_sm_cache_e res_cached; /* Resource cache type. */ ++ struct SM_RESOURCE_T *res_shared; /* Shared resource */ ++ ++ enum SM_STATS_T res_stats[END_ALL]; /* Resource statistics. */ ++ ++ uint8_t map_count; /* Counter of mappings for this resource. */ ++ struct list_head map_list; /* Maps associated with a resource. */ ++ ++ struct SM_PRIV_DATA_T *private; ++}; ++ ++/* Private file data associated with each opened device. ++*/ ++struct SM_PRIV_DATA_T { ++ struct list_head resource_list; /* List of resources. */ ++ ++ pid_t pid; /* PID of creator. */ ++ ++ struct dentry *dir_pid; /* Debug fs entries root. */ ++ struct SM_PDE_T dir_stats; /* Debug fs entries statistics sub-tree. */ ++ struct SM_PDE_T dir_res; /* Debug fs resource sub-tree. */ ++ ++ int restart_sys; /* Tracks restart on interrupt. */ ++ VC_SM_MSG_TYPE int_action; /* Interrupted action. */ ++ uint32_t int_trans_id; /* Interrupted transaction. */ ++ ++}; ++ ++/* Global state information. ++*/ ++struct SM_STATE_T { ++ VC_VCHI_SM_HANDLE_T sm_handle; /* Handle for videocore service. */ ++ struct dentry *dir_root; /* Debug fs entries root. */ ++ struct dentry *dir_alloc; /* Debug fs entries allocations. */ ++ struct SM_PDE_T dir_stats; /* Debug fs entries statistics sub-tree. */ ++ struct SM_PDE_T dir_state; /* Debug fs entries state sub-tree. */ ++ struct dentry *debug; /* Debug fs entries debug. */ ++ ++ struct mutex map_lock; /* Global map lock. */ ++ struct list_head map_list; /* List of maps. */ ++ struct list_head resource_list; /* List of resources. */ ++ ++ enum SM_STATS_T deceased[END_ALL]; /* Natural termination stats. */ ++ enum SM_STATS_T terminated[END_ALL]; /* Forced termination stats. */ ++ uint32_t res_deceased_cnt; /* Natural termination counter. */ ++ uint32_t res_terminated_cnt; /* Forced termination counter. */ ++ ++ struct cdev sm_cdev; /* Device. */ ++ dev_t sm_devid; /* Device identifier. */ ++ struct class *sm_class; /* Class. */ ++ struct device *sm_dev; /* Device. */ ++ ++ struct SM_PRIV_DATA_T *data_knl; /* Kernel internal data tracking. */ ++ ++ struct mutex lock; /* Global lock. */ ++ uint32_t guid; /* GUID (next) tracker. */ ++ ++}; ++ ++/* ---- Private Variables ----------------------------------------------- */ ++ ++static struct SM_STATE_T *sm_state; ++static int sm_inited; ++ ++#if 0 ++static const char *const sm_cache_map_vector[] = { ++ "(null)", ++ "host", ++ "videocore", ++ "host+videocore", ++}; ++#endif ++ ++/* ---- Private Function Prototypes -------------------------------------- */ ++ ++/* ---- Private Functions ------------------------------------------------ */ ++ ++static inline unsigned vcaddr_to_pfn(unsigned long vc_addr) ++{ ++ unsigned long pfn = vc_addr & 0x3FFFFFFF; ++ pfn += mm_vc_mem_phys_addr; ++ pfn >>= PAGE_SHIFT; ++ return pfn; ++} ++ ++/* Carries over to the state statistics the statistics once owned by a deceased ++** resource. ++*/ ++static void vc_sm_resource_deceased(struct SM_RESOURCE_T *p_res, int terminated) ++{ ++ if (sm_state != NULL) { ++ if (p_res != NULL) { ++ int ix; ++ ++ if (terminated) ++ sm_state->res_terminated_cnt++; ++ else ++ sm_state->res_deceased_cnt++; ++ ++ for (ix = 0; ix < END_ALL; ix++) { ++ if (terminated) ++ sm_state->terminated[ix] += ++ p_res->res_stats[ix]; ++ else ++ sm_state->deceased[ix] += ++ p_res->res_stats[ix]; ++ } ++ } ++ } ++} ++ ++/* Fetch a videocore handle corresponding to a mapping of the pid+address ++** returns 0 (ie NULL) if no such handle exists in the global map. ++*/ ++static unsigned int vmcs_sm_vc_handle_from_pid_and_address(unsigned int pid, ++ unsigned int addr) ++{ ++ struct sm_mmap *map = NULL; ++ unsigned int handle = 0; ++ ++ if (!sm_state || addr == 0) ++ goto out; ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ /* Lookup the resource. ++ */ ++ if (!list_empty(&sm_state->map_list)) { ++ list_for_each_entry(map, &sm_state->map_list, map_list) { ++ if (map->res_pid != pid || map->res_addr != addr) ++ continue; ++ ++ pr_debug("[%s]: global map %p (pid %u, addr %lx) -> vc-hdl %x (usr-hdl %x)\n", ++ __func__, map, map->res_pid, map->res_addr, ++ map->res_vc_hdl, map->res_usr_hdl); ++ ++ handle = map->res_vc_hdl; ++ break; ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++out: ++ /* Use a debug log here as it may be a valid situation that we query ++ ** for something that is not mapped, we do not want a kernel log each ++ ** time around. ++ ** ++ ** There are other error log that would pop up accordingly if someone ++ ** subsequently tries to use something invalid after being told not to ++ ** use it... ++ */ ++ if (handle == 0) { ++ pr_debug("[%s]: not a valid map (pid %u, addr %x)\n", ++ __func__, pid, addr); ++ } ++ ++ return handle; ++} ++ ++/* Fetch a user handle corresponding to a mapping of the pid+address ++** returns 0 (ie NULL) if no such handle exists in the global map. ++*/ ++static unsigned int vmcs_sm_usr_handle_from_pid_and_address(unsigned int pid, ++ unsigned int addr) ++{ ++ struct sm_mmap *map = NULL; ++ unsigned int handle = 0; ++ ++ if (!sm_state || addr == 0) ++ goto out; ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ /* Lookup the resource. ++ */ ++ if (!list_empty(&sm_state->map_list)) { ++ list_for_each_entry(map, &sm_state->map_list, map_list) { ++ if (map->res_pid != pid || map->res_addr != addr) ++ continue; ++ ++ pr_debug("[%s]: global map %p (pid %u, addr %lx) -> usr-hdl %x (vc-hdl %x)\n", ++ __func__, map, map->res_pid, map->res_addr, ++ map->res_usr_hdl, map->res_vc_hdl); ++ ++ handle = map->res_usr_hdl; ++ break; ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++out: ++ /* Use a debug log here as it may be a valid situation that we query ++ * for something that is not mapped yet. ++ * ++ * There are other error log that would pop up accordingly if someone ++ * subsequently tries to use something invalid after being told not to ++ * use it... ++ */ ++ if (handle == 0) ++ pr_debug("[%s]: not a valid map (pid %u, addr %x)\n", ++ __func__, pid, addr); ++ ++ return handle; ++} ++ ++#if defined(DO_NOT_USE) ++/* Fetch an address corresponding to a mapping of the pid+handle ++** returns 0 (ie NULL) if no such address exists in the global map. ++*/ ++static unsigned int vmcs_sm_usr_address_from_pid_and_vc_handle(unsigned int pid, ++ unsigned int hdl) ++{ ++ struct sm_mmap *map = NULL; ++ unsigned int addr = 0; ++ ++ if (sm_state == NULL || hdl == 0) ++ goto out; ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ /* Lookup the resource. ++ */ ++ if (!list_empty(&sm_state->map_list)) { ++ list_for_each_entry(map, &sm_state->map_list, map_list) { ++ if (map->res_pid != pid || map->res_vc_hdl != hdl) ++ continue; ++ ++ pr_debug("[%s]: global map %p (pid %u, vc-hdl %x, usr-hdl %x) -> addr %lx\n", ++ __func__, map, map->res_pid, map->res_vc_hdl, ++ map->res_usr_hdl, map->res_addr); ++ ++ addr = map->res_addr; ++ break; ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++out: ++ /* Use a debug log here as it may be a valid situation that we query ++ ** for something that is not mapped, we do not want a kernel log each ++ ** time around. ++ ** ++ ** There are other error log that would pop up accordingly if someone ++ ** subsequently tries to use something invalid after being told not to ++ ** use it... ++ */ ++ if (addr == 0) ++ pr_debug("[%s]: not a valid map (pid %u, hdl %x)\n", ++ __func__, pid, hdl); ++ ++ return addr; ++} ++#endif ++ ++/* Fetch an address corresponding to a mapping of the pid+handle ++** returns 0 (ie NULL) if no such address exists in the global map. ++*/ ++static unsigned int vmcs_sm_usr_address_from_pid_and_usr_handle(unsigned int ++ pid, ++ unsigned int ++ hdl) ++{ ++ struct sm_mmap *map = NULL; ++ unsigned int addr = 0; ++ ++ if (sm_state == NULL || hdl == 0) ++ goto out; ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ /* Lookup the resource. ++ */ ++ if (!list_empty(&sm_state->map_list)) { ++ list_for_each_entry(map, &sm_state->map_list, map_list) { ++ if (map->res_pid != pid || map->res_usr_hdl != hdl) ++ continue; ++ ++ pr_debug("[%s]: global map %p (pid %u, vc-hdl %x, usr-hdl %x) -> addr %lx\n", ++ __func__, map, map->res_pid, map->res_vc_hdl, ++ map->res_usr_hdl, map->res_addr); ++ ++ addr = map->res_addr; ++ break; ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++out: ++ /* Use a debug log here as it may be a valid situation that we query ++ * for something that is not mapped, we do not want a kernel log each ++ * time around. ++ * ++ * There are other error log that would pop up accordingly if someone ++ * subsequently tries to use something invalid after being told not to ++ * use it... ++ */ ++ if (addr == 0) ++ pr_debug("[%s]: not a valid map (pid %u, hdl %x)\n", __func__, ++ pid, hdl); ++ ++ return addr; ++} ++ ++/* Adds a resource mapping to the global data list. ++*/ ++static void vmcs_sm_add_map(struct SM_STATE_T *state, ++ struct SM_RESOURCE_T *resource, struct sm_mmap *map) ++{ ++ mutex_lock(&(state->map_lock)); ++ ++ /* Add to the global list of mappings ++ */ ++ list_add(&map->map_list, &state->map_list); ++ ++ /* Add to the list of mappings for this resource ++ */ ++ list_add(&map->resource_map_list, &resource->map_list); ++ resource->map_count++; ++ ++ mutex_unlock(&(state->map_lock)); ++ ++ pr_debug("[%s]: added map %p (pid %u, vc-hdl %x, usr-hdl %x, addr %lx)\n", ++ __func__, map, map->res_pid, map->res_vc_hdl, ++ map->res_usr_hdl, map->res_addr); ++} ++ ++/* Removes a resource mapping from the global data list. ++*/ ++static void vmcs_sm_remove_map(struct SM_STATE_T *state, ++ struct SM_RESOURCE_T *resource, ++ struct sm_mmap *map) ++{ ++ mutex_lock(&(state->map_lock)); ++ ++ /* Remove from the global list of mappings ++ */ ++ list_del(&map->map_list); ++ ++ /* Remove from the list of mapping for this resource ++ */ ++ list_del(&map->resource_map_list); ++ if (resource->map_count > 0) ++ resource->map_count--; ++ ++ mutex_unlock(&(state->map_lock)); ++ ++ pr_debug("[%s]: removed map %p (pid %d, vc-hdl %x, usr-hdl %x, addr %lx)\n", ++ __func__, map, map->res_pid, map->res_vc_hdl, map->res_usr_hdl, ++ map->res_addr); ++ ++ kfree(map); ++} ++ ++/* Read callback for the global state proc entry. ++*/ ++static int vc_sm_global_state_show(struct seq_file *s, void *v) ++{ ++ struct sm_mmap *map = NULL; ++ int map_count = 0; ++ ++ if (sm_state == NULL) ++ return 0; ++ ++ seq_printf(s, "\nVC-ServiceHandle 0x%x\n", ++ (unsigned int)sm_state->sm_handle); ++ ++ /* Log all applicable mapping(s). ++ */ ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ if (!list_empty(&sm_state->map_list)) { ++ list_for_each_entry(map, &sm_state->map_list, map_list) { ++ map_count++; ++ ++ seq_printf(s, "\nMapping 0x%x\n", ++ (unsigned int)map); ++ seq_printf(s, " TGID %u\n", ++ map->res_pid); ++ seq_printf(s, " VC-HDL 0x%x\n", ++ map->res_vc_hdl); ++ seq_printf(s, " USR-HDL 0x%x\n", ++ map->res_usr_hdl); ++ seq_printf(s, " USR-ADDR 0x%lx\n", ++ map->res_addr); ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ seq_printf(s, "\n\nTotal map count: %d\n\n", map_count); ++ ++ return 0; ++} ++ ++static int vc_sm_global_statistics_show(struct seq_file *s, void *v) ++{ ++ int ix; ++ ++ /* Global state tracked statistics. ++ */ ++ if (sm_state != NULL) { ++ seq_puts(s, "\nDeceased Resources Statistics\n"); ++ ++ seq_printf(s, "\nNatural Cause (%u occurences)\n", ++ sm_state->res_deceased_cnt); ++ for (ix = 0; ix < END_ATTEMPT; ix++) { ++ if (sm_state->deceased[ix] > 0) { ++ seq_printf(s, " %u\t%s\n", ++ sm_state->deceased[ix], ++ sm_stats_human_read[ix]); ++ } ++ } ++ seq_puts(s, "\n"); ++ for (ix = 0; ix < END_ATTEMPT; ix++) { ++ if (sm_state->deceased[ix + END_ATTEMPT] > 0) { ++ seq_printf(s, " %u\tFAILED %s\n", ++ sm_state->deceased[ix + END_ATTEMPT], ++ sm_stats_human_read[ix]); ++ } ++ } ++ ++ seq_printf(s, "\nForcefull (%u occurences)\n", ++ sm_state->res_terminated_cnt); ++ for (ix = 0; ix < END_ATTEMPT; ix++) { ++ if (sm_state->terminated[ix] > 0) { ++ seq_printf(s, " %u\t%s\n", ++ sm_state->terminated[ix], ++ sm_stats_human_read[ix]); ++ } ++ } ++ seq_puts(s, "\n"); ++ for (ix = 0; ix < END_ATTEMPT; ix++) { ++ if (sm_state->terminated[ix + END_ATTEMPT] > 0) { ++ seq_printf(s, " %u\tFAILED %s\n", ++ sm_state->terminated[ix + ++ END_ATTEMPT], ++ sm_stats_human_read[ix]); ++ } ++ } ++ } ++ ++ return 0; ++} ++ ++#if 0 ++/* Read callback for the statistics proc entry. ++*/ ++static int vc_sm_statistics_show(struct seq_file *s, void *v) ++{ ++ int ix; ++ struct SM_PRIV_DATA_T *file_data; ++ struct SM_RESOURCE_T *resource; ++ int res_count = 0; ++ struct SM_PDE_T *p_pde; ++ ++ p_pde = (struct SM_PDE_T *)(s->private); ++ file_data = (struct SM_PRIV_DATA_T *)(p_pde->priv_data); ++ ++ if (file_data == NULL) ++ return 0; ++ ++ /* Per process statistics. ++ */ ++ ++ seq_printf(s, "\nStatistics for TGID %d\n", file_data->pid); ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ if (!list_empty(&file_data->resource_list)) { ++ list_for_each_entry(resource, &file_data->resource_list, ++ resource_list) { ++ res_count++; ++ ++ seq_printf(s, "\nGUID: 0x%x\n\n", ++ resource->res_guid); ++ for (ix = 0; ix < END_ATTEMPT; ix++) { ++ if (resource->res_stats[ix] > 0) { ++ seq_printf(s, ++ " %u\t%s\n", ++ resource->res_stats[ix], ++ sm_stats_human_read[ix]); ++ } ++ } ++ seq_puts(s, "\n"); ++ for (ix = 0; ix < END_ATTEMPT; ix++) { ++ if (resource->res_stats[ix + END_ATTEMPT] > 0) { ++ seq_printf(s, ++ " %u\tFAILED %s\n", ++ resource->res_stats[ ++ ix + END_ATTEMPT], ++ sm_stats_human_read[ix]); ++ } ++ } ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ seq_printf(s, "\nResources Count %d\n", res_count); ++ ++ return 0; ++} ++#endif ++ ++#if 0 ++/* Read callback for the allocation proc entry. */ ++static int vc_sm_alloc_show(struct seq_file *s, void *v) ++{ ++ struct SM_PRIV_DATA_T *file_data; ++ struct SM_RESOURCE_T *resource; ++ int alloc_count = 0; ++ struct SM_PDE_T *p_pde; ++ ++ p_pde = (struct SM_PDE_T *)(s->private); ++ file_data = (struct SM_PRIV_DATA_T *)(p_pde->priv_data); ++ ++ if (!file_data) ++ return 0; ++ ++ /* Per process statistics. */ ++ seq_printf(s, "\nAllocation for TGID %d\n", file_data->pid); ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ if (!list_empty(&file_data->resource_list)) { ++ list_for_each_entry(resource, &file_data->resource_list, ++ resource_list) { ++ alloc_count++; ++ ++ seq_printf(s, "\nGUID: 0x%x\n", ++ resource->res_guid); ++ seq_printf(s, "Lock Count: %u\n", ++ resource->lock_count); ++ seq_printf(s, "Mapped: %s\n", ++ (resource->map_count ? "yes" : "no")); ++ seq_printf(s, "VC-handle: 0x%x\n", ++ resource->res_handle); ++ seq_printf(s, "VC-address: 0x%p\n", ++ resource->res_base_mem); ++ seq_printf(s, "VC-size (bytes): %u\n", ++ resource->res_size); ++ seq_printf(s, "Cache: %s\n", ++ sm_cache_map_vector[resource->res_cached]); ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ seq_printf(s, "\n\nTotal allocation count: %d\n\n", alloc_count); ++ ++ return 0; ++} ++#endif ++ ++static int vc_sm_seq_file_show(struct seq_file *s, void *v) ++{ ++ struct SM_PDE_T *sm_pde; ++ ++ sm_pde = (struct SM_PDE_T *)(s->private); ++ ++ if (sm_pde && sm_pde->show) ++ sm_pde->show(s, v); ++ ++ return 0; ++} ++ ++static int vc_sm_single_open(struct inode *inode, struct file *file) ++{ ++ return single_open(file, vc_sm_seq_file_show, inode->i_private); ++} ++ ++static const struct file_operations vc_sm_debug_fs_fops = { ++ .open = vc_sm_single_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++}; ++ ++/* Adds a resource to the private data list which tracks all the allocated ++** data. ++*/ ++static void vmcs_sm_add_resource(struct SM_PRIV_DATA_T *privdata, ++ struct SM_RESOURCE_T *resource) ++{ ++ mutex_lock(&(sm_state->map_lock)); ++ list_add(&resource->resource_list, &privdata->resource_list); ++ list_add(&resource->global_resource_list, &sm_state->resource_list); ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ pr_debug("[%s]: added resource %p (base addr %p, hdl %x, size %u, cache %u)\n", ++ __func__, resource, resource->res_base_mem, ++ resource->res_handle, resource->res_size, resource->res_cached); ++} ++ ++/* Locates a resource and acquire a reference on it. ++** The resource won't be deleted while there is a reference on it. ++*/ ++static struct SM_RESOURCE_T *vmcs_sm_acquire_resource(struct SM_PRIV_DATA_T ++ *private, ++ unsigned int res_guid) ++{ ++ struct SM_RESOURCE_T *resource, *ret = NULL; ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ list_for_each_entry(resource, &private->resource_list, resource_list) { ++ if (resource->res_guid != res_guid) ++ continue; ++ ++ pr_debug("[%s]: located resource %p (guid: %x, base addr %p, hdl %x, size %u, cache %u)\n", ++ __func__, resource, resource->res_guid, ++ resource->res_base_mem, resource->res_handle, ++ resource->res_size, resource->res_cached); ++ resource->ref_count++; ++ ret = resource; ++ break; ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ return ret; ++} ++ ++/* Locates a resource and acquire a reference on it. ++** The resource won't be deleted while there is a reference on it. ++*/ ++static struct SM_RESOURCE_T *vmcs_sm_acquire_first_resource( ++ struct SM_PRIV_DATA_T *private) ++{ ++ struct SM_RESOURCE_T *resource, *ret = NULL; ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ list_for_each_entry(resource, &private->resource_list, resource_list) { ++ pr_debug("[%s]: located resource %p (guid: %x, base addr %p, hdl %x, size %u, cache %u)\n", ++ __func__, resource, resource->res_guid, ++ resource->res_base_mem, resource->res_handle, ++ resource->res_size, resource->res_cached); ++ resource->ref_count++; ++ ret = resource; ++ break; ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ return ret; ++} ++ ++/* Locates a resource and acquire a reference on it. ++** The resource won't be deleted while there is a reference on it. ++*/ ++static struct SM_RESOURCE_T *vmcs_sm_acquire_global_resource(unsigned int ++ res_guid) ++{ ++ struct SM_RESOURCE_T *resource, *ret = NULL; ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ list_for_each_entry(resource, &sm_state->resource_list, ++ global_resource_list) { ++ if (resource->res_guid != res_guid) ++ continue; ++ ++ pr_debug("[%s]: located resource %p (guid: %x, base addr %p, hdl %x, size %u, cache %u)\n", ++ __func__, resource, resource->res_guid, ++ resource->res_base_mem, resource->res_handle, ++ resource->res_size, resource->res_cached); ++ resource->ref_count++; ++ ret = resource; ++ break; ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ return ret; ++} ++ ++/* Release a previously acquired resource. ++** The resource will be deleted when its refcount reaches 0. ++*/ ++static void vmcs_sm_release_resource(struct SM_RESOURCE_T *resource, int force) ++{ ++ struct SM_PRIV_DATA_T *private = resource->private; ++ struct sm_mmap *map, *map_tmp; ++ struct SM_RESOURCE_T *res_tmp; ++ int ret; ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ if (--resource->ref_count) { ++ if (force) ++ pr_err("[%s]: resource %p in use\n", __func__, resource); ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ return; ++ } ++ ++ /* Time to free the resource. Start by removing it from the list */ ++ list_del(&resource->resource_list); ++ list_del(&resource->global_resource_list); ++ ++ /* Walk the global resource list, find out if the resource is used ++ * somewhere else. In which case we don't want to delete it. ++ */ ++ list_for_each_entry(res_tmp, &sm_state->resource_list, ++ global_resource_list) { ++ if (res_tmp->res_handle == resource->res_handle) { ++ resource->res_handle = 0; ++ break; ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ pr_debug("[%s]: freeing data - guid %x, hdl %x, base address %p\n", ++ __func__, resource->res_guid, resource->res_handle, ++ resource->res_base_mem); ++ resource->res_stats[FREE]++; ++ ++ /* Make sure the resource we're removing is unmapped first */ ++ if (resource->map_count && !list_empty(&resource->map_list)) { ++ down_write(¤t->mm->mmap_sem); ++ list_for_each_entry_safe(map, map_tmp, &resource->map_list, ++ resource_map_list) { ++ ret = ++ do_munmap(current->mm, map->res_addr, ++ resource->res_size); ++ if (ret) { ++ pr_err("[%s]: could not unmap resource %p\n", ++ __func__, resource); ++ } ++ } ++ up_write(¤t->mm->mmap_sem); ++ } ++ ++ /* Free up the videocore allocated resource. ++ */ ++ if (resource->res_handle) { ++ VC_SM_FREE_T free = { ++ resource->res_handle, resource->res_base_mem ++ }; ++ int status = vc_vchi_sm_free(sm_state->sm_handle, &free, ++ &private->int_trans_id); ++ if (status != 0 && status != -EINTR) { ++ pr_err("[%s]: failed to free memory on videocore (status: %u, trans_id: %u)\n", ++ __func__, status, private->int_trans_id); ++ resource->res_stats[FREE_FAIL]++; ++ ret = -EPERM; ++ } ++ } ++ ++ /* Free up the shared resource. ++ */ ++ if (resource->res_shared) ++ vmcs_sm_release_resource(resource->res_shared, 0); ++ ++ /* Free up the local resource tracking this allocation. ++ */ ++ vc_sm_resource_deceased(resource, force); ++ kfree(resource); ++} ++ ++/* Dump the map table for the driver. If process is -1, dumps the whole table, ++** if process is a valid pid (non -1) dump only the entries associated with the ++** pid of interest. ++*/ ++static void vmcs_sm_host_walk_map_per_pid(int pid) ++{ ++ struct sm_mmap *map = NULL; ++ ++ /* Make sure the device was started properly. ++ */ ++ if (sm_state == NULL) { ++ pr_err("[%s]: invalid device\n", __func__); ++ return; ++ } ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ /* Log all applicable mapping(s). ++ */ ++ if (!list_empty(&sm_state->map_list)) { ++ list_for_each_entry(map, &sm_state->map_list, map_list) { ++ if (pid == -1 || map->res_pid == pid) { ++ pr_info("[%s]: tgid: %u - vc-hdl: %x, usr-hdl: %x, usr-addr: %lx\n", ++ __func__, map->res_pid, map->res_vc_hdl, ++ map->res_usr_hdl, map->res_addr); ++ } ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ return; ++} ++ ++/* Dump the allocation table from host side point of view. This only dumps the ++** data allocated for this process/device referenced by the file_data. ++*/ ++static void vmcs_sm_host_walk_alloc(struct SM_PRIV_DATA_T *file_data) ++{ ++ struct SM_RESOURCE_T *resource = NULL; ++ ++ /* Make sure the device was started properly. ++ */ ++ if ((sm_state == NULL) || (file_data == NULL)) { ++ pr_err("[%s]: invalid device\n", __func__); ++ return; ++ } ++ ++ mutex_lock(&(sm_state->map_lock)); ++ ++ if (!list_empty(&file_data->resource_list)) { ++ list_for_each_entry(resource, &file_data->resource_list, ++ resource_list) { ++ pr_info("[%s]: guid: %x - hdl: %x, vc-mem: %p, size: %u, cache: %u\n", ++ __func__, resource->res_guid, resource->res_handle, ++ resource->res_base_mem, resource->res_size, ++ resource->res_cached); ++ } ++ } ++ ++ mutex_unlock(&(sm_state->map_lock)); ++ ++ return; ++} ++ ++/* Create support for private data tracking. ++*/ ++static struct SM_PRIV_DATA_T *vc_sm_create_priv_data(pid_t id) ++{ ++ char alloc_name[32]; ++ struct SM_PRIV_DATA_T *file_data = NULL; ++ ++ /* Allocate private structure. */ ++ file_data = kzalloc(sizeof(*file_data), GFP_KERNEL); ++ ++ if (!file_data) { ++ pr_err("[%s]: cannot allocate file data\n", __func__); ++ goto out; ++ } ++ ++ snprintf(alloc_name, sizeof(alloc_name), "%d", id); ++ ++ INIT_LIST_HEAD(&file_data->resource_list); ++ file_data->pid = id; ++ file_data->dir_pid = debugfs_create_dir(alloc_name, ++ sm_state->dir_alloc); ++#if 0 ++ /* TODO: fix this to support querying statistics per pid */ ++ ++ if (IS_ERR_OR_NULL(file_data->dir_pid)) { ++ file_data->dir_pid = NULL; ++ } else { ++ struct dentry *dir_entry; ++ ++ dir_entry = debugfs_create_file(VC_SM_RESOURCES, S_IRUGO, ++ file_data->dir_pid, file_data, ++ vc_sm_debug_fs_fops); ++ ++ file_data->dir_res.dir_entry = dir_entry; ++ file_data->dir_res.priv_data = file_data; ++ file_data->dir_res.show = &vc_sm_alloc_show; ++ ++ dir_entry = debugfs_create_file(VC_SM_STATS, S_IRUGO, ++ file_data->dir_pid, file_data, ++ vc_sm_debug_fs_fops); ++ ++ file_data->dir_res.dir_entry = dir_entry; ++ file_data->dir_res.priv_data = file_data; ++ file_data->dir_res.show = &vc_sm_statistics_show; ++ } ++ pr_debug("[%s]: private data allocated %p\n", __func__, file_data); ++ ++#endif ++out: ++ return file_data; ++} ++ ++/* Open the device. Creates a private state to help track all allocation ++** associated with this device. ++*/ ++static int vc_sm_open(struct inode *inode, struct file *file) ++{ ++ int ret = 0; ++ ++ /* Make sure the device was started properly. ++ */ ++ if (!sm_state) { ++ pr_err("[%s]: invalid device\n", __func__); ++ ret = -EPERM; ++ goto out; ++ } ++ ++ file->private_data = vc_sm_create_priv_data(current->tgid); ++ if (file->private_data == NULL) { ++ pr_err("[%s]: failed to create data tracker\n", __func__); ++ ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++out: ++ return ret; ++} ++ ++/* Close the device. Free up all resources still associated with this device ++** at the time. ++*/ ++static int vc_sm_release(struct inode *inode, struct file *file) ++{ ++ struct SM_PRIV_DATA_T *file_data = ++ (struct SM_PRIV_DATA_T *)file->private_data; ++ struct SM_RESOURCE_T *resource; ++ int ret = 0; ++ ++ /* Make sure the device was started properly. ++ */ ++ if (sm_state == NULL || file_data == NULL) { ++ pr_err("[%s]: invalid device\n", __func__); ++ ret = -EPERM; ++ goto out; ++ } ++ ++ pr_debug("[%s]: using private data %p\n", __func__, file_data); ++ ++ if (file_data->restart_sys == -EINTR) { ++ VC_SM_ACTION_CLEAN_T action_clean; ++ ++ pr_debug("[%s]: releasing following EINTR on %u (trans_id: %u) (likely due to signal)...\n", ++ __func__, file_data->int_action, ++ file_data->int_trans_id); ++ ++ action_clean.res_action = file_data->int_action; ++ action_clean.action_trans_id = file_data->int_trans_id; ++ ++ vc_vchi_sm_clean_up(sm_state->sm_handle, &action_clean); ++ } ++ ++ while ((resource = vmcs_sm_acquire_first_resource(file_data)) != NULL) { ++ vmcs_sm_release_resource(resource, 0); ++ vmcs_sm_release_resource(resource, 1); ++ } ++ ++ /* Remove the corresponding proc entry. */ ++ debugfs_remove_recursive(file_data->dir_pid); ++ ++ /* Terminate the private data. ++ */ ++ kfree(file_data); ++ ++out: ++ return ret; ++} ++ ++static void vcsm_vma_open(struct vm_area_struct *vma) ++{ ++ struct sm_mmap *map = (struct sm_mmap *)vma->vm_private_data; ++ ++ pr_debug("[%s]: virt %lx-%lx, pid %i, pfn %i\n", ++ __func__, vma->vm_start, vma->vm_end, (int)current->tgid, ++ (int)vma->vm_pgoff); ++ ++ map->ref_count++; ++} ++ ++static void vcsm_vma_close(struct vm_area_struct *vma) ++{ ++ struct sm_mmap *map = (struct sm_mmap *)vma->vm_private_data; ++ ++ pr_debug("[%s]: virt %lx-%lx, pid %i, pfn %i\n", ++ __func__, vma->vm_start, vma->vm_end, (int)current->tgid, ++ (int)vma->vm_pgoff); ++ ++ map->ref_count--; ++ ++ /* Remove from the map table. ++ */ ++ if (map->ref_count == 0) ++ vmcs_sm_remove_map(sm_state, map->resource, map); ++} ++ ++static int vcsm_vma_fault(struct vm_area_struct *vma, struct vm_fault *vmf) ++{ ++ struct sm_mmap *map = (struct sm_mmap *)vma->vm_private_data; ++ struct SM_RESOURCE_T *resource = map->resource; ++ pgoff_t page_offset; ++ unsigned long pfn; ++ int ret = 0; ++ ++ /* Lock the resource if necessary. ++ */ ++ if (!resource->lock_count) { ++ VC_SM_LOCK_UNLOCK_T lock_unlock; ++ VC_SM_LOCK_RESULT_T lock_result; ++ int status; ++ ++ lock_unlock.res_handle = resource->res_handle; ++ lock_unlock.res_mem = resource->res_base_mem; ++ ++ pr_debug("[%s]: attempt to lock data - hdl %x, base address %p\n", ++ __func__, lock_unlock.res_handle, lock_unlock.res_mem); ++ ++ /* Lock the videocore allocated resource. ++ */ ++ status = vc_vchi_sm_lock(sm_state->sm_handle, ++ &lock_unlock, &lock_result, 0); ++ if ((status != 0) || ++ ((status == 0) && (lock_result.res_mem == NULL))) { ++ pr_err("[%s]: failed to lock memory on videocore (status: %u)\n", ++ __func__, status); ++ resource->res_stats[LOCK_FAIL]++; ++ return VM_FAULT_SIGBUS; ++ } ++ ++ pfn = vcaddr_to_pfn((unsigned long)resource->res_base_mem); ++ outer_inv_range(__pfn_to_phys(pfn), ++ __pfn_to_phys(pfn) + resource->res_size); ++ ++ resource->res_stats[LOCK]++; ++ resource->lock_count++; ++ ++ /* Keep track of the new base memory. ++ */ ++ if ((lock_result.res_mem != NULL) && ++ (lock_result.res_old_mem != NULL) && ++ (lock_result.res_mem != lock_result.res_old_mem)) { ++ resource->res_base_mem = lock_result.res_mem; ++ } ++ } ++ ++ /* We don't use vmf->pgoff since that has the fake offset */ ++ page_offset = ((unsigned long)vmf->virtual_address - vma->vm_start); ++ pfn = (uint32_t)resource->res_base_mem & 0x3FFFFFFF; ++ pfn += mm_vc_mem_phys_addr; ++ pfn += page_offset; ++ pfn >>= PAGE_SHIFT; ++ ++ /* Finally, remap it */ ++ ret = vm_insert_pfn(vma, (unsigned long)vmf->virtual_address, pfn); ++ ++ switch (ret) { ++ case 0: ++ case -ERESTARTSYS: ++ return VM_FAULT_NOPAGE; ++ case -ENOMEM: ++ case -EAGAIN: ++ return VM_FAULT_OOM; ++ default: ++ return VM_FAULT_SIGBUS; ++ } ++} ++ ++static struct vm_operations_struct vcsm_vm_ops = { ++ .open = vcsm_vma_open, ++ .close = vcsm_vma_close, ++ .fault = vcsm_vma_fault, ++}; ++ ++/* Walks a VMA and clean each valid page from the cache */ ++static void vcsm_vma_cache_clean_page_range(unsigned long addr, ++ unsigned long end) ++{ ++ pgd_t *pgd; ++ pud_t *pud; ++ pmd_t *pmd; ++ pte_t *pte; ++ unsigned long pgd_next, pud_next, pmd_next; ++ ++ if (addr >= end) ++ return; ++ ++ /* Walk PGD */ ++ pgd = pgd_offset(current->mm, addr); ++ do { ++ pgd_next = pgd_addr_end(addr, end); ++ ++ if (pgd_none(*pgd) || pgd_bad(*pgd)) ++ continue; ++ ++ /* Walk PUD */ ++ pud = pud_offset(pgd, addr); ++ do { ++ pud_next = pud_addr_end(addr, pgd_next); ++ if (pud_none(*pud) || pud_bad(*pud)) ++ continue; ++ ++ /* Walk PMD */ ++ pmd = pmd_offset(pud, addr); ++ do { ++ pmd_next = pmd_addr_end(addr, pud_next); ++ if (pmd_none(*pmd) || pmd_bad(*pmd)) ++ continue; ++ ++ /* Walk PTE */ ++ pte = pte_offset_map(pmd, addr); ++ do { ++ if (pte_none(*pte) ++ || !pte_present(*pte)) ++ continue; ++ ++ /* Clean + invalidate */ ++ dmac_flush_range((const void *) addr, ++ (const void *) ++ (addr + PAGE_SIZE)); ++ ++ } while (pte++, addr += ++ PAGE_SIZE, addr != pmd_next); ++ pte_unmap(pte); ++ ++ } while (pmd++, addr = pmd_next, addr != pud_next); ++ ++ } while (pud++, addr = pud_next, addr != pgd_next); ++ } while (pgd++, addr = pgd_next, addr != end); ++} ++ ++/* Map an allocated data into something that the user space. ++*/ ++static int vc_sm_mmap(struct file *file, struct vm_area_struct *vma) ++{ ++ int ret = 0; ++ struct SM_PRIV_DATA_T *file_data = ++ (struct SM_PRIV_DATA_T *)file->private_data; ++ struct SM_RESOURCE_T *resource = NULL; ++ struct sm_mmap *map = NULL; ++ ++ /* Make sure the device was started properly. ++ */ ++ if ((sm_state == NULL) || (file_data == NULL)) { ++ pr_err("[%s]: invalid device\n", __func__); ++ return -EPERM; ++ } ++ ++ pr_debug("[%s]: private data %p, guid %x\n", __func__, file_data, ++ ((unsigned int)vma->vm_pgoff << PAGE_SHIFT)); ++ ++ /* We lookup to make sure that the data we are being asked to mmap is ++ ** something that we allocated. ++ ** ++ ** We use the offset information as the key to tell us which resource ++ ** we are mapping. ++ */ ++ resource = vmcs_sm_acquire_resource(file_data, ++ ((unsigned int)vma->vm_pgoff << ++ PAGE_SHIFT)); ++ if (resource == NULL) { ++ pr_err("[%s]: failed to locate resource for guid %x\n", __func__, ++ ((unsigned int)vma->vm_pgoff << PAGE_SHIFT)); ++ return -ENOMEM; ++ } ++ ++ pr_debug("[%s]: guid %x, tgid %u, %u, %u\n", ++ __func__, resource->res_guid, current->tgid, resource->pid, ++ file_data->pid); ++ ++ /* Check permissions. ++ */ ++ if (resource->pid && (resource->pid != current->tgid)) { ++ pr_err("[%s]: current tgid %u != %u owner\n", ++ __func__, current->tgid, resource->pid); ++ ret = -EPERM; ++ goto error; ++ } ++ ++ /* Verify that what we are asked to mmap is proper. ++ */ ++ if (resource->res_size != (unsigned int)(vma->vm_end - vma->vm_start)) { ++ pr_err("[%s]: size inconsistency (resource: %u - mmap: %u)\n", ++ __func__, ++ resource->res_size, ++ (unsigned int)(vma->vm_end - vma->vm_start)); ++ ++ ret = -EINVAL; ++ goto error; ++ } ++ ++ /* Keep track of the tuple in the global resource list such that one ++ * can do a mapping lookup for address/memory handle. ++ */ ++ map = kzalloc(sizeof(*map), GFP_KERNEL); ++ if (map == NULL) { ++ pr_err("[%s]: failed to allocate global tracking resource\n", ++ __func__); ++ ret = -ENOMEM; ++ goto error; ++ } ++ ++ map->res_pid = current->tgid; ++ map->res_vc_hdl = resource->res_handle; ++ map->res_usr_hdl = resource->res_guid; ++ map->res_addr = (long unsigned int)vma->vm_start; ++ map->resource = resource; ++ map->vma = vma; ++ vmcs_sm_add_map(sm_state, resource, map); ++ ++ /* We are not actually mapping the pages, we just provide a fault ++ ** handler to allow pages to be mapped when accessed ++ */ ++ vma->vm_flags |= ++ VM_IO | VM_PFNMAP | VM_DONTCOPY | VM_DONTEXPAND; ++ vma->vm_ops = &vcsm_vm_ops; ++ vma->vm_private_data = map; ++ ++ /* vm_pgoff is the first PFN of the mapped memory */ ++ vma->vm_pgoff = (unsigned long)resource->res_base_mem & 0x3FFFFFFF; ++ vma->vm_pgoff += mm_vc_mem_phys_addr; ++ vma->vm_pgoff >>= PAGE_SHIFT; ++ ++ if ((resource->res_cached == VMCS_SM_CACHE_NONE) || ++ (resource->res_cached == VMCS_SM_CACHE_VC)) { ++ /* Allocated non host cached memory, honour it. ++ */ ++ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); ++ } ++ ++ pr_debug("[%s]: resource %p (guid %x) - cnt %u, base address %p, handle %x, size %u (%u), cache %u\n", ++ __func__, ++ resource, resource->res_guid, resource->lock_count, ++ resource->res_base_mem, resource->res_handle, ++ resource->res_size, (unsigned int)(vma->vm_end - vma->vm_start), ++ resource->res_cached); ++ ++ pr_debug("[%s]: resource %p (base address %p, handle %x) - map-count %d, usr-addr %x\n", ++ __func__, resource, resource->res_base_mem, ++ resource->res_handle, resource->map_count, ++ (unsigned int)vma->vm_start); ++ ++ vcsm_vma_open(vma); ++ resource->res_stats[MAP]++; ++ vmcs_sm_release_resource(resource, 0); ++ return 0; ++ ++error: ++ resource->res_stats[MAP_FAIL]++; ++ vmcs_sm_release_resource(resource, 0); ++ return ret; ++} ++ ++/* Allocate a shared memory handle and block. ++*/ ++int vc_sm_ioctl_alloc(struct SM_PRIV_DATA_T *private, ++ struct vmcs_sm_ioctl_alloc *ioparam) ++{ ++ int ret = 0; ++ int status; ++ struct SM_RESOURCE_T *resource; ++ VC_SM_ALLOC_T alloc = { 0 }; ++ VC_SM_ALLOC_RESULT_T result = { 0 }; ++ ++ /* Setup our allocation parameters */ ++ alloc.type = ((ioparam->cached == VMCS_SM_CACHE_VC) ++ || (ioparam->cached == ++ VMCS_SM_CACHE_BOTH)) ? VC_SM_ALLOC_CACHED : ++ VC_SM_ALLOC_NON_CACHED; ++ alloc.base_unit = ioparam->size; ++ alloc.num_unit = ioparam->num; ++ alloc.allocator = current->tgid; ++ /* Align to kernel page size */ ++ alloc.alignement = 4096; ++ /* Align the size to the kernel page size */ ++ alloc.base_unit = ++ (alloc.base_unit + alloc.alignement - 1) & ~(alloc.alignement - 1); ++ if (*ioparam->name) { ++ memcpy(alloc.name, ioparam->name, sizeof(alloc.name) - 1); ++ } else { ++ memcpy(alloc.name, VMCS_SM_RESOURCE_NAME_DEFAULT, ++ sizeof(VMCS_SM_RESOURCE_NAME_DEFAULT)); ++ } ++ ++ pr_debug("[%s]: attempt to allocate \"%s\" data - type %u, base %u (%u), num %u, alignement %u\n", ++ __func__, alloc.name, alloc.type, ioparam->size, ++ alloc.base_unit, alloc.num_unit, alloc.alignement); ++ ++ /* Allocate local resource to track this allocation. ++ */ ++ resource = kzalloc(sizeof(*resource), GFP_KERNEL); ++ if (!resource) { ++ ret = -ENOMEM; ++ goto error; ++ } ++ INIT_LIST_HEAD(&resource->map_list); ++ resource->ref_count++; ++ resource->pid = current->tgid; ++ ++ /* Allocate the videocore resource. ++ */ ++ status = vc_vchi_sm_alloc(sm_state->sm_handle, &alloc, &result, ++ &private->int_trans_id); ++ if (status == -EINTR) { ++ pr_debug("[%s]: requesting allocate memory action restart (trans_id: %u)\n", ++ __func__, private->int_trans_id); ++ ret = -ERESTARTSYS; ++ private->restart_sys = -EINTR; ++ private->int_action = VC_SM_MSG_TYPE_ALLOC; ++ goto error; ++ } else if (status != 0 || (status == 0 && result.res_mem == NULL)) { ++ pr_err("[%s]: failed to allocate memory on videocore (status: %u, trans_id: %u)\n", ++ __func__, status, private->int_trans_id); ++ ret = -ENOMEM; ++ resource->res_stats[ALLOC_FAIL]++; ++ goto error; ++ } ++ ++ /* Keep track of the resource we created. ++ */ ++ resource->private = private; ++ resource->res_handle = result.res_handle; ++ resource->res_base_mem = result.res_mem; ++ resource->res_size = alloc.base_unit * alloc.num_unit; ++ resource->res_cached = ioparam->cached; ++ ++ /* Kernel/user GUID. This global identifier is used for mmap'ing the ++ * allocated region from user space, it is passed as the mmap'ing ++ * offset, we use it to 'hide' the videocore handle/address. ++ */ ++ mutex_lock(&sm_state->lock); ++ resource->res_guid = ++sm_state->guid; ++ mutex_unlock(&sm_state->lock); ++ resource->res_guid <<= PAGE_SHIFT; ++ ++ vmcs_sm_add_resource(private, resource); ++ ++ pr_debug("[%s]: allocated data - guid %x, hdl %x, base address %p, size %d, cache %d\n", ++ __func__, resource->res_guid, resource->res_handle, ++ resource->res_base_mem, resource->res_size, ++ resource->res_cached); ++ ++ /* We're done */ ++ resource->res_stats[ALLOC]++; ++ ioparam->handle = resource->res_guid; ++ return 0; ++ ++error: ++ pr_err("[%s]: failed to allocate \"%s\" data (%i) - type %u, base %u (%u), num %u, alignment %u\n", ++ __func__, alloc.name, ret, alloc.type, ioparam->size, ++ alloc.base_unit, alloc.num_unit, alloc.alignement); ++ if (resource != NULL) { ++ vc_sm_resource_deceased(resource, 1); ++ kfree(resource); ++ } ++ return ret; ++} ++ ++/* Share an allocate memory handle and block. ++*/ ++int vc_sm_ioctl_alloc_share(struct SM_PRIV_DATA_T *private, ++ struct vmcs_sm_ioctl_alloc_share *ioparam) ++{ ++ struct SM_RESOURCE_T *resource, *shared_resource; ++ int ret = 0; ++ ++ pr_debug("[%s]: attempt to share resource %u\n", __func__, ++ ioparam->handle); ++ ++ shared_resource = vmcs_sm_acquire_global_resource(ioparam->handle); ++ if (shared_resource == NULL) { ++ ret = -ENOMEM; ++ goto error; ++ } ++ ++ /* Allocate local resource to track this allocation. ++ */ ++ resource = kzalloc(sizeof(*resource), GFP_KERNEL); ++ if (resource == NULL) { ++ pr_err("[%s]: failed to allocate local tracking resource\n", ++ __func__); ++ ret = -ENOMEM; ++ goto error; ++ } ++ INIT_LIST_HEAD(&resource->map_list); ++ resource->ref_count++; ++ resource->pid = current->tgid; ++ ++ /* Keep track of the resource we created. ++ */ ++ resource->private = private; ++ resource->res_handle = shared_resource->res_handle; ++ resource->res_base_mem = shared_resource->res_base_mem; ++ resource->res_size = shared_resource->res_size; ++ resource->res_cached = shared_resource->res_cached; ++ resource->res_shared = shared_resource; ++ ++ mutex_lock(&sm_state->lock); ++ resource->res_guid = ++sm_state->guid; ++ mutex_unlock(&sm_state->lock); ++ resource->res_guid <<= PAGE_SHIFT; ++ ++ vmcs_sm_add_resource(private, resource); ++ ++ pr_debug("[%s]: allocated data - guid %x, hdl %x, base address %p, size %d, cache %d\n", ++ __func__, resource->res_guid, resource->res_handle, ++ resource->res_base_mem, resource->res_size, ++ resource->res_cached); ++ ++ /* We're done */ ++ resource->res_stats[ALLOC]++; ++ ioparam->handle = resource->res_guid; ++ ioparam->size = resource->res_size; ++ return 0; ++ ++error: ++ pr_err("[%s]: failed to share %u\n", __func__, ioparam->handle); ++ if (shared_resource != NULL) ++ vmcs_sm_release_resource(shared_resource, 0); ++ ++ return ret; ++} ++ ++/* Free a previously allocated shared memory handle and block. ++*/ ++static int vc_sm_ioctl_free(struct SM_PRIV_DATA_T *private, ++ struct vmcs_sm_ioctl_free *ioparam) ++{ ++ struct SM_RESOURCE_T *resource = ++ vmcs_sm_acquire_resource(private, ioparam->handle); ++ ++ if (resource == NULL) { ++ pr_err("[%s]: resource for guid %u does not exist\n", __func__, ++ ioparam->handle); ++ return -EINVAL; ++ } ++ ++ /* Check permissions. ++ */ ++ if (resource->pid && (resource->pid != current->tgid)) { ++ pr_err("[%s]: current tgid %u != %u owner\n", ++ __func__, current->tgid, resource->pid); ++ vmcs_sm_release_resource(resource, 0); ++ return -EPERM; ++ } ++ ++ vmcs_sm_release_resource(resource, 0); ++ vmcs_sm_release_resource(resource, 0); ++ return 0; ++} ++ ++/* Resize a previously allocated shared memory handle and block. ++*/ ++static int vc_sm_ioctl_resize(struct SM_PRIV_DATA_T *private, ++ struct vmcs_sm_ioctl_resize *ioparam) ++{ ++ int ret = 0; ++ int status; ++ VC_SM_RESIZE_T resize; ++ struct SM_RESOURCE_T *resource; ++ ++ /* Locate resource from GUID. ++ */ ++ resource = vmcs_sm_acquire_resource(private, ioparam->handle); ++ if (!resource) { ++ pr_err("[%s]: failed resource - guid %x\n", ++ __func__, ioparam->handle); ++ ret = -EFAULT; ++ goto error; ++ } ++ ++ /* If the resource is locked, its reference count will be not NULL, ++ ** in which case we will not be allowed to resize it anyways, so ++ ** reject the attempt here. ++ */ ++ if (resource->lock_count != 0) { ++ pr_err("[%s]: cannot resize - guid %x, ref-cnt %d\n", ++ __func__, ioparam->handle, resource->lock_count); ++ ret = -EFAULT; ++ goto error; ++ } ++ ++ /* Check permissions. ++ */ ++ if (resource->pid && (resource->pid != current->tgid)) { ++ pr_err("[%s]: current tgid %u != %u owner\n", __func__, ++ current->tgid, resource->pid); ++ ret = -EPERM; ++ goto error; ++ } ++ ++ if (resource->map_count != 0) { ++ pr_err("[%s]: cannot resize - guid %x, ref-cnt %d\n", ++ __func__, ioparam->handle, resource->map_count); ++ ret = -EFAULT; ++ goto error; ++ } ++ ++ resize.res_handle = resource->res_handle; ++ resize.res_mem = resource->res_base_mem; ++ resize.res_new_size = ioparam->new_size; ++ ++ pr_debug("[%s]: attempt to resize data - guid %x, hdl %x, base address %p\n", ++ __func__, ioparam->handle, resize.res_handle, resize.res_mem); ++ ++ /* Resize the videocore allocated resource. ++ */ ++ status = vc_vchi_sm_resize(sm_state->sm_handle, &resize, ++ &private->int_trans_id); ++ if (status == -EINTR) { ++ pr_debug("[%s]: requesting resize memory action restart (trans_id: %u)\n", ++ __func__, private->int_trans_id); ++ ret = -ERESTARTSYS; ++ private->restart_sys = -EINTR; ++ private->int_action = VC_SM_MSG_TYPE_RESIZE; ++ goto error; ++ } else if (status != 0) { ++ pr_err("[%s]: failed to resize memory on videocore (status: %u, trans_id: %u)\n", ++ __func__, status, private->int_trans_id); ++ ret = -EPERM; ++ goto error; ++ } ++ ++ pr_debug("[%s]: success to resize data - hdl %x, size %d -> %d\n", ++ __func__, resize.res_handle, resource->res_size, ++ resize.res_new_size); ++ ++ /* Successfully resized, save the information and inform the user. ++ */ ++ ioparam->old_size = resource->res_size; ++ resource->res_size = resize.res_new_size; ++ ++error: ++ if (resource) ++ vmcs_sm_release_resource(resource, 0); ++ ++ return ret; ++} ++ ++/* Lock a previously allocated shared memory handle and block. ++*/ ++static int vc_sm_ioctl_lock(struct SM_PRIV_DATA_T *private, ++ struct vmcs_sm_ioctl_lock_unlock *ioparam, ++ int change_cache, enum vmcs_sm_cache_e cache_type, ++ unsigned int vc_addr) ++{ ++ int status; ++ VC_SM_LOCK_UNLOCK_T lock; ++ VC_SM_LOCK_RESULT_T result; ++ struct SM_RESOURCE_T *resource; ++ int ret = 0; ++ struct sm_mmap *map, *map_tmp; ++ long unsigned int phys_addr; ++ ++ map = NULL; ++ ++ /* Locate resource from GUID. ++ */ ++ resource = vmcs_sm_acquire_resource(private, ioparam->handle); ++ if (resource == NULL) { ++ ret = -EINVAL; ++ goto error; ++ } ++ ++ /* Check permissions. ++ */ ++ if (resource->pid && (resource->pid != current->tgid)) { ++ pr_err("[%s]: current tgid %u != %u owner\n", __func__, ++ current->tgid, resource->pid); ++ ret = -EPERM; ++ goto error; ++ } ++ ++ lock.res_handle = resource->res_handle; ++ lock.res_mem = resource->res_base_mem; ++ ++ /* Take the lock and get the address to be mapped. ++ */ ++ if (vc_addr == 0) { ++ pr_debug("[%s]: attempt to lock data - guid %x, hdl %x, base address %p\n", ++ __func__, ioparam->handle, lock.res_handle, ++ lock.res_mem); ++ ++ /* Lock the videocore allocated resource. ++ */ ++ status = vc_vchi_sm_lock(sm_state->sm_handle, &lock, &result, ++ &private->int_trans_id); ++ if (status == -EINTR) { ++ pr_debug("[%s]: requesting lock memory action restart (trans_id: %u)\n", ++ __func__, private->int_trans_id); ++ ret = -ERESTARTSYS; ++ private->restart_sys = -EINTR; ++ private->int_action = VC_SM_MSG_TYPE_LOCK; ++ goto error; ++ } else if (status != 0 || ++ (status == 0 && result.res_mem == NULL)) { ++ pr_err("[%s]: failed to lock memory on videocore (status: %u, trans_id: %u)\n", ++ __func__, status, private->int_trans_id); ++ ret = -EPERM; ++ resource->res_stats[LOCK_FAIL]++; ++ goto error; ++ } ++ ++ pr_debug("[%s]: succeed to lock data - hdl %x, base address %p (%p), ref-cnt %d\n", ++ __func__, lock.res_handle, result.res_mem, ++ lock.res_mem, resource->lock_count); ++ } ++ /* Lock assumed taken already, address to be mapped is known. ++ */ ++ else ++ resource->res_base_mem = (void *)vc_addr; ++ ++ resource->res_stats[LOCK]++; ++ resource->lock_count++; ++ ++ /* Keep track of the new base memory allocation if it has changed. ++ */ ++ if ((vc_addr == 0) && ++ (result.res_mem != NULL) && ++ (result.res_old_mem != NULL) && ++ (result.res_mem != result.res_old_mem)) { ++ resource->res_base_mem = result.res_mem; ++ ++ /* Kernel allocated resources. ++ */ ++ if (resource->pid == 0) { ++ if (!list_empty(&resource->map_list)) { ++ list_for_each_entry_safe(map, map_tmp, ++ &resource->map_list, ++ resource_map_list) { ++ if (map->res_addr) { ++ iounmap((void *)map->res_addr); ++ map->res_addr = 0; ++ ++ vmcs_sm_remove_map(sm_state, ++ map->resource, ++ map); ++ break; ++ } ++ } ++ } ++ } ++ } ++ ++ if (change_cache) ++ resource->res_cached = cache_type; ++ ++ if (resource->map_count) { ++ ioparam->addr = ++ vmcs_sm_usr_address_from_pid_and_usr_handle( ++ current->tgid, ioparam->handle); ++ ++ pr_debug("[%s] map_count %d private->pid %d current->tgid %d hnd %x addr %u\n", ++ __func__, resource->map_count, private->pid, ++ current->tgid, ioparam->handle, ioparam->addr); ++ } else { ++ /* Kernel allocated resources. ++ */ ++ if (resource->pid == 0) { ++ pr_debug("[%s]: attempt mapping kernel resource - guid %x, hdl %x\n", ++ __func__, ioparam->handle, lock.res_handle); ++ ++ ioparam->addr = 0; ++ ++ map = kzalloc(sizeof(*map), GFP_KERNEL); ++ if (map == NULL) { ++ pr_err("[%s]: failed allocating tracker\n", ++ __func__); ++ ret = -ENOMEM; ++ goto error; ++ } else { ++ phys_addr = (uint32_t)resource->res_base_mem & ++ 0x3FFFFFFF; ++ phys_addr += mm_vc_mem_phys_addr; ++ if (resource->res_cached ++ == VMCS_SM_CACHE_HOST) { ++ ioparam->addr = (long unsigned int) ++ /* TODO - make cached work */ ++ ioremap_nocache(phys_addr, ++ resource->res_size); ++ ++ pr_debug("[%s]: mapping kernel - guid %x, hdl %x - cached mapping %u\n", ++ __func__, ioparam->handle, ++ lock.res_handle, ioparam->addr); ++ } else { ++ ioparam->addr = (long unsigned int) ++ ioremap_nocache(phys_addr, ++ resource->res_size); ++ ++ pr_debug("[%s]: mapping kernel- guid %x, hdl %x - non cached mapping %u\n", ++ __func__, ioparam->handle, ++ lock.res_handle, ioparam->addr); ++ } ++ ++ map->res_pid = 0; ++ map->res_vc_hdl = resource->res_handle; ++ map->res_usr_hdl = resource->res_guid; ++ map->res_addr = ioparam->addr; ++ map->resource = resource; ++ map->vma = NULL; ++ ++ vmcs_sm_add_map(sm_state, resource, map); ++ } ++ } else ++ ioparam->addr = 0; ++ } ++ ++error: ++ if (resource) ++ vmcs_sm_release_resource(resource, 0); ++ ++ return ret; ++} ++ ++/* Unlock a previously allocated shared memory handle and block. ++*/ ++static int vc_sm_ioctl_unlock(struct SM_PRIV_DATA_T *private, ++ struct vmcs_sm_ioctl_lock_unlock *ioparam, ++ int flush, int wait_reply, int no_vc_unlock) ++{ ++ int status; ++ VC_SM_LOCK_UNLOCK_T unlock; ++ struct sm_mmap *map, *map_tmp; ++ struct SM_RESOURCE_T *resource; ++ int ret = 0; ++ ++ map = NULL; ++ ++ /* Locate resource from GUID. ++ */ ++ resource = vmcs_sm_acquire_resource(private, ioparam->handle); ++ if (resource == NULL) { ++ ret = -EINVAL; ++ goto error; ++ } ++ ++ /* Check permissions. ++ */ ++ if (resource->pid && (resource->pid != current->tgid)) { ++ pr_err("[%s]: current tgid %u != %u owner\n", ++ __func__, current->tgid, resource->pid); ++ ret = -EPERM; ++ goto error; ++ } ++ ++ unlock.res_handle = resource->res_handle; ++ unlock.res_mem = resource->res_base_mem; ++ ++ pr_debug("[%s]: attempt to unlock data - guid %x, hdl %x, base address %p\n", ++ __func__, ioparam->handle, unlock.res_handle, unlock.res_mem); ++ ++ /* User space allocated resources. ++ */ ++ if (resource->pid) { ++ /* Flush if requested */ ++ if (resource->res_cached && flush) { ++ dma_addr_t phys_addr = 0; ++ resource->res_stats[FLUSH]++; ++ ++ phys_addr = ++ (dma_addr_t)((uint32_t)resource->res_base_mem & ++ 0x3FFFFFFF); ++ phys_addr += (dma_addr_t)mm_vc_mem_phys_addr; ++ ++ /* L1 cache flush */ ++ down_read(¤t->mm->mmap_sem); ++ list_for_each_entry(map, &resource->map_list, ++ resource_map_list) { ++ if (map->vma) { ++ unsigned long start; ++ unsigned long end; ++ start = map->vma->vm_start; ++ end = map->vma->vm_end; ++ ++ vcsm_vma_cache_clean_page_range( ++ start, end); ++ } ++ } ++ up_read(¤t->mm->mmap_sem); ++ ++ /* L2 cache flush */ ++ outer_clean_range(phys_addr, ++ phys_addr + ++ (size_t) resource->res_size); ++ } ++ ++ /* We need to zap all the vmas associated with this resource */ ++ if (resource->lock_count == 1) { ++ down_read(¤t->mm->mmap_sem); ++ list_for_each_entry(map, &resource->map_list, ++ resource_map_list) { ++ if (map->vma) { ++ zap_vma_ptes(map->vma, ++ map->vma->vm_start, ++ map->vma->vm_end - ++ map->vma->vm_start); ++ } ++ } ++ up_read(¤t->mm->mmap_sem); ++ } ++ } ++ /* Kernel allocated resources. */ ++ else { ++ /* Global + Taken in this context */ ++ if (resource->ref_count == 2) { ++ if (!list_empty(&resource->map_list)) { ++ list_for_each_entry_safe(map, map_tmp, ++ &resource->map_list, ++ resource_map_list) { ++ if (map->res_addr) { ++ if (flush && ++ (resource->res_cached == ++ VMCS_SM_CACHE_HOST)) { ++ long unsigned int ++ phys_addr; ++ phys_addr = (uint32_t) ++ resource->res_base_mem & 0x3FFFFFFF; ++ phys_addr += ++ mm_vc_mem_phys_addr; ++ ++ /* L1 cache flush */ ++ dmac_flush_range((const ++ void ++ *) ++ map->res_addr, (const void *) ++ (map->res_addr + resource->res_size)); ++ ++ /* L2 cache flush */ ++ outer_clean_range ++ (phys_addr, ++ phys_addr + ++ (size_t) ++ resource->res_size); ++ } ++ ++ iounmap((void *)map->res_addr); ++ map->res_addr = 0; ++ ++ vmcs_sm_remove_map(sm_state, ++ map->resource, ++ map); ++ break; ++ } ++ } ++ } ++ } ++ } ++ ++ if (resource->lock_count) { ++ /* Bypass the videocore unlock. ++ */ ++ if (no_vc_unlock) ++ status = 0; ++ /* Unlock the videocore allocated resource. ++ */ ++ else { ++ status = ++ vc_vchi_sm_unlock(sm_state->sm_handle, &unlock, ++ &private->int_trans_id, ++ wait_reply); ++ if (status == -EINTR) { ++ pr_debug("[%s]: requesting unlock memory action restart (trans_id: %u)\n", ++ __func__, private->int_trans_id); ++ ++ ret = -ERESTARTSYS; ++ resource->res_stats[UNLOCK]--; ++ private->restart_sys = -EINTR; ++ private->int_action = VC_SM_MSG_TYPE_UNLOCK; ++ goto error; ++ } else if (status != 0) { ++ pr_err("[%s]: failed to unlock vc mem (status: %u, trans_id: %u)\n", ++ __func__, status, private->int_trans_id); ++ ++ ret = -EPERM; ++ resource->res_stats[UNLOCK_FAIL]++; ++ goto error; ++ } ++ } ++ ++ resource->res_stats[UNLOCK]++; ++ resource->lock_count--; ++ } ++ ++ pr_debug("[%s]: success to unlock data - hdl %x, base address %p, ref-cnt %d\n", ++ __func__, unlock.res_handle, unlock.res_mem, ++ resource->lock_count); ++ ++error: ++ if (resource) ++ vmcs_sm_release_resource(resource, 0); ++ ++ return ret; ++} ++ ++/* Handle control from host. */ ++static long vc_sm_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ int ret = 0; ++ unsigned int cmdnr = _IOC_NR(cmd); ++ struct SM_PRIV_DATA_T *file_data = ++ (struct SM_PRIV_DATA_T *)file->private_data; ++ struct SM_RESOURCE_T *resource = NULL; ++ ++ /* Validate we can work with this device. */ ++ if ((sm_state == NULL) || (file_data == NULL)) { ++ pr_err("[%s]: invalid device\n", __func__); ++ ret = -EPERM; ++ goto out; ++ } ++ ++ pr_debug("[%s]: cmd %x tgid %u, owner %u\n", __func__, cmdnr, ++ current->tgid, file_data->pid); ++ ++ /* Action is a re-post of a previously interrupted action? */ ++ if (file_data->restart_sys == -EINTR) { ++ VC_SM_ACTION_CLEAN_T action_clean; ++ ++ pr_debug("[%s]: clean up of action %u (trans_id: %u) following EINTR\n", ++ __func__, file_data->int_action, ++ file_data->int_trans_id); ++ ++ action_clean.res_action = file_data->int_action; ++ action_clean.action_trans_id = file_data->int_trans_id; ++ ++ vc_vchi_sm_clean_up(sm_state->sm_handle, &action_clean); ++ ++ file_data->restart_sys = 0; ++ } ++ ++ /* Now process the command. ++ */ ++ switch (cmdnr) { ++ /* New memory allocation. ++ */ ++ case VMCS_SM_CMD_ALLOC: ++ { ++ struct vmcs_sm_ioctl_alloc ioparam; ++ ++ /* Get the parameter data. ++ */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ ret = vc_sm_ioctl_alloc(file_data, &ioparam); ++ if (!ret && ++ (copy_to_user((void *)arg, ++ &ioparam, sizeof(ioparam)) != 0)) { ++ struct vmcs_sm_ioctl_free freeparam = { ++ ioparam.handle ++ }; ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ vc_sm_ioctl_free(file_data, &freeparam); ++ ret = -EFAULT; ++ } ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Share existing memory allocation. ++ */ ++ case VMCS_SM_CMD_ALLOC_SHARE: ++ { ++ struct vmcs_sm_ioctl_alloc_share ioparam; ++ ++ /* Get the parameter data. ++ */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ ret = vc_sm_ioctl_alloc_share(file_data, &ioparam); ++ ++ /* Copy result back to user. ++ */ ++ if (!ret ++ && copy_to_user((void *)arg, &ioparam, ++ sizeof(ioparam)) != 0) { ++ struct vmcs_sm_ioctl_free freeparam = { ++ ioparam.handle ++ }; ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ vc_sm_ioctl_free(file_data, &freeparam); ++ ret = -EFAULT; ++ } ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Lock (attempt to) *and* register a cache behavior change. ++ */ ++ case VMCS_SM_CMD_LOCK_CACHE: ++ { ++ struct vmcs_sm_ioctl_lock_cache ioparam; ++ struct vmcs_sm_ioctl_lock_unlock lock; ++ ++ /* Get parameter data. ++ */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ lock.handle = ioparam.handle; ++ ret = ++ vc_sm_ioctl_lock(file_data, &lock, 1, ++ ioparam.cached, 0); ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Lock (attempt to) existing memory allocation. ++ */ ++ case VMCS_SM_CMD_LOCK: ++ { ++ struct vmcs_sm_ioctl_lock_unlock ioparam; ++ ++ /* Get parameter data. ++ */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ ret = vc_sm_ioctl_lock(file_data, &ioparam, 0, 0, 0); ++ ++ /* Copy result back to user. ++ */ ++ if (copy_to_user((void *)arg, &ioparam, sizeof(ioparam)) ++ != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ } ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Unlock (attempt to) existing memory allocation. ++ */ ++ case VMCS_SM_CMD_UNLOCK: ++ { ++ struct vmcs_sm_ioctl_lock_unlock ioparam; ++ ++ /* Get parameter data. ++ */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ ret = vc_sm_ioctl_unlock(file_data, &ioparam, 0, 1, 0); ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Resize (attempt to) existing memory allocation. ++ */ ++ case VMCS_SM_CMD_RESIZE: ++ { ++ struct vmcs_sm_ioctl_resize ioparam; ++ ++ /* Get parameter data. ++ */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ ret = vc_sm_ioctl_resize(file_data, &ioparam); ++ ++ /* Copy result back to user. ++ */ ++ if (copy_to_user((void *)arg, &ioparam, sizeof(ioparam)) ++ != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ } ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Terminate existing memory allocation. ++ */ ++ case VMCS_SM_CMD_FREE: ++ { ++ struct vmcs_sm_ioctl_free ioparam; ++ ++ /* Get parameter data. ++ */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ ret = vc_sm_ioctl_free(file_data, &ioparam); ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Walk allocation on videocore, information shows up in the ++ ** videocore log. ++ */ ++ case VMCS_SM_CMD_VC_WALK_ALLOC: ++ { ++ pr_debug("[%s]: invoking walk alloc\n", __func__); ++ ++ if (vc_vchi_sm_walk_alloc(sm_state->sm_handle) != 0) ++ pr_err("[%s]: failed to walk-alloc on videocore\n", ++ __func__); ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++/* Walk mapping table on host, information shows up in the ++ ** kernel log. ++ */ ++ case VMCS_SM_CMD_HOST_WALK_MAP: ++ { ++ /* Use pid of -1 to tell to walk the whole map. */ ++ vmcs_sm_host_walk_map_per_pid(-1); ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* Walk mapping table per process on host. */ ++ case VMCS_SM_CMD_HOST_WALK_PID_ALLOC: ++ { ++ struct vmcs_sm_ioctl_walk ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ vmcs_sm_host_walk_alloc(file_data); ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* Walk allocation per process on host. */ ++ case VMCS_SM_CMD_HOST_WALK_PID_MAP: ++ { ++ struct vmcs_sm_ioctl_walk ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ vmcs_sm_host_walk_map_per_pid(ioparam.pid); ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* Gets the size of the memory associated with a user handle. */ ++ case VMCS_SM_CMD_SIZE_USR_HANDLE: ++ { ++ struct vmcs_sm_ioctl_size ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ /* Locate resource from GUID. */ ++ resource = ++ vmcs_sm_acquire_resource(file_data, ioparam.handle); ++ if (resource != NULL) { ++ ioparam.size = resource->res_size; ++ vmcs_sm_release_resource(resource, 0); ++ } else { ++ ioparam.size = 0; ++ } ++ ++ if (copy_to_user((void *)arg, ++ &ioparam, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ } ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* Verify we are dealing with a valid resource. */ ++ case VMCS_SM_CMD_CHK_USR_HANDLE: ++ { ++ struct vmcs_sm_ioctl_chk ioparam; ++ ++ /* Get parameter data. ++ */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ /* Locate resource from GUID. */ ++ resource = ++ vmcs_sm_acquire_resource(file_data, ioparam.handle); ++ if (resource == NULL) ++ ret = -EINVAL; ++ /* If the resource is cacheable, return additional ++ * information that may be needed to flush the cache. ++ */ ++ else if ((resource->res_cached == VMCS_SM_CACHE_HOST) || ++ (resource->res_cached == VMCS_SM_CACHE_BOTH)) { ++ ioparam.addr = ++ vmcs_sm_usr_address_from_pid_and_usr_handle ++ (current->tgid, ioparam.handle); ++ ioparam.size = resource->res_size; ++ ioparam.cache = resource->res_cached; ++ } else { ++ ioparam.addr = 0; ++ ioparam.size = 0; ++ ioparam.cache = resource->res_cached; ++ } ++ ++ if (resource) ++ vmcs_sm_release_resource(resource, 0); ++ ++ if (copy_to_user((void *)arg, ++ &ioparam, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ } ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* ++ * Maps a user handle given the process and the virtual address. ++ */ ++ case VMCS_SM_CMD_MAPPED_USR_HANDLE: ++ { ++ struct vmcs_sm_ioctl_map ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ ioparam.handle = ++ vmcs_sm_usr_handle_from_pid_and_address( ++ ioparam.pid, ioparam.addr); ++ ++ resource = ++ vmcs_sm_acquire_resource(file_data, ioparam.handle); ++ if ((resource != NULL) ++ && ((resource->res_cached == VMCS_SM_CACHE_HOST) ++ || (resource->res_cached == ++ VMCS_SM_CACHE_BOTH))) { ++ ioparam.size = resource->res_size; ++ } else { ++ ioparam.size = 0; ++ } ++ ++ if (resource) ++ vmcs_sm_release_resource(resource, 0); ++ ++ if (copy_to_user((void *)arg, ++ &ioparam, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ } ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* ++ * Maps a videocore handle given process and virtual address. ++ */ ++ case VMCS_SM_CMD_MAPPED_VC_HDL_FROM_ADDR: ++ { ++ struct vmcs_sm_ioctl_map ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ ioparam.handle = vmcs_sm_vc_handle_from_pid_and_address( ++ ioparam.pid, ioparam.addr); ++ ++ if (copy_to_user((void *)arg, ++ &ioparam, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ++ ret = -EFAULT; ++ } ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Maps a videocore handle given process and user handle. */ ++ case VMCS_SM_CMD_MAPPED_VC_HDL_FROM_HDL: ++ { ++ struct vmcs_sm_ioctl_map ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ /* Locate resource from GUID. */ ++ resource = ++ vmcs_sm_acquire_resource(file_data, ioparam.handle); ++ if (resource != NULL) { ++ ioparam.handle = resource->res_handle; ++ vmcs_sm_release_resource(resource, 0); ++ } else { ++ ioparam.handle = 0; ++ } ++ ++ if (copy_to_user((void *)arg, ++ &ioparam, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ++ ret = -EFAULT; ++ } ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* ++ * Maps a videocore address given process and videocore handle. ++ */ ++ case VMCS_SM_CMD_MAPPED_VC_ADDR_FROM_HDL: ++ { ++ struct vmcs_sm_ioctl_map ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ /* Locate resource from GUID. */ ++ resource = ++ vmcs_sm_acquire_resource(file_data, ioparam.handle); ++ if (resource != NULL) { ++ ioparam.addr = ++ (unsigned int)resource->res_base_mem; ++ vmcs_sm_release_resource(resource, 0); ++ } else { ++ ioparam.addr = 0; ++ } ++ ++ if (copy_to_user((void *)arg, ++ &ioparam, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ } ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* Maps a user address given process and vc handle. ++ */ ++ case VMCS_SM_CMD_MAPPED_USR_ADDRESS: ++ { ++ struct vmcs_sm_ioctl_map ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ /* ++ * Return the address information from the mapping, ++ * 0 (ie NULL) if it cannot locate the actual mapping. ++ */ ++ ioparam.addr = ++ vmcs_sm_usr_address_from_pid_and_usr_handle ++ (ioparam.pid, ioparam.handle); ++ ++ if (copy_to_user((void *)arg, ++ &ioparam, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-to-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ } ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* Flush the cache for a given mapping. */ ++ case VMCS_SM_CMD_FLUSH: ++ { ++ struct vmcs_sm_ioctl_cache ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ /* Locate resource from GUID. */ ++ resource = ++ vmcs_sm_acquire_resource(file_data, ioparam.handle); ++ ++ if ((resource != NULL) && resource->res_cached) { ++ dma_addr_t phys_addr = 0; ++ ++ resource->res_stats[FLUSH]++; ++ ++ phys_addr = ++ (dma_addr_t)((uint32_t) ++ resource->res_base_mem & ++ 0x3FFFFFFF); ++ phys_addr += (dma_addr_t)mm_vc_mem_phys_addr; ++ ++ /* L1 cache flush */ ++ down_read(¤t->mm->mmap_sem); ++ vcsm_vma_cache_clean_page_range((unsigned long) ++ ioparam.addr, ++ (unsigned long) ++ ioparam.addr + ++ ioparam.size); ++ up_read(¤t->mm->mmap_sem); ++ ++ /* L2 cache flush */ ++ outer_clean_range(phys_addr, ++ phys_addr + ++ (size_t) ioparam.size); ++ } else if (resource == NULL) { ++ ret = -EINVAL; ++ goto out; ++ } ++ ++ if (resource) ++ vmcs_sm_release_resource(resource, 0); ++ ++ /* Done. */ ++ goto out; ++ } ++ break; ++ ++ /* Invalidate the cache for a given mapping. */ ++ case VMCS_SM_CMD_INVALID: ++ { ++ struct vmcs_sm_ioctl_cache ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ ++ /* Locate resource from GUID. ++ */ ++ resource = ++ vmcs_sm_acquire_resource(file_data, ioparam.handle); ++ ++ if ((resource != NULL) && resource->res_cached) { ++ dma_addr_t phys_addr = 0; ++ ++ resource->res_stats[INVALID]++; ++ ++ phys_addr = ++ (dma_addr_t)((uint32_t) ++ resource->res_base_mem & ++ 0x3FFFFFFF); ++ phys_addr += (dma_addr_t)mm_vc_mem_phys_addr; ++ ++ /* L2 cache invalidate */ ++ outer_inv_range(phys_addr, ++ phys_addr + ++ (size_t) ioparam.size); ++ ++ /* L1 cache invalidate */ ++ down_read(¤t->mm->mmap_sem); ++ vcsm_vma_cache_clean_page_range((unsigned long) ++ ioparam.addr, ++ (unsigned long) ++ ioparam.addr + ++ ioparam.size); ++ up_read(¤t->mm->mmap_sem); ++ } else if (resource == NULL) { ++ ret = -EINVAL; ++ goto out; ++ } ++ ++ if (resource) ++ vmcs_sm_release_resource(resource, 0); ++ ++ /* Done. ++ */ ++ goto out; ++ } ++ break; ++ ++ /* Flush/Invalidate the cache for a given mapping. */ ++ case VMCS_SM_CMD_CLEAN_INVALID: ++ { ++ int i; ++ struct vmcs_sm_ioctl_clean_invalid ioparam; ++ ++ /* Get parameter data. */ ++ if (copy_from_user(&ioparam, ++ (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user for cmd %x\n", ++ __func__, cmdnr); ++ ret = -EFAULT; ++ goto out; ++ } ++ for (i=0; ires_cached) { ++ unsigned long base = ioparam.s[i].addr & ~(PAGE_SIZE-1); ++ unsigned long end = (ioparam.s[i].addr + ioparam.s[i].size + PAGE_SIZE-1) & ~(PAGE_SIZE-1); ++ resource->res_stats[ioparam.s[i].cmd == 1 ? INVALID:FLUSH]++; ++ ++ /* L1/L2 cache flush */ ++ down_read(¤t->mm->mmap_sem); ++ vcsm_vma_cache_clean_page_range(base, end); ++ up_read(¤t->mm->mmap_sem); ++ } else if (resource == NULL) { ++ ret = -EINVAL; ++ goto out; ++ } ++ ++ if (resource) ++ vmcs_sm_release_resource(resource, 0); ++ } ++ break; ++ } ++ } ++ } ++ break; ++ ++ default: ++ { ++ ret = -EINVAL; ++ goto out; ++ } ++ break; ++ } ++ ++out: ++ return ret; ++} ++ ++/* Device operations that we managed in this driver. ++*/ ++static const struct file_operations vmcs_sm_ops = { ++ .owner = THIS_MODULE, ++ .unlocked_ioctl = vc_sm_ioctl, ++ .open = vc_sm_open, ++ .release = vc_sm_release, ++ .mmap = vc_sm_mmap, ++}; ++ ++/* Creation of device. ++*/ ++static int vc_sm_create_sharedmemory(void) ++{ ++ int ret; ++ ++ if (sm_state == NULL) { ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++ /* Create a device class for creating dev nodes. ++ */ ++ sm_state->sm_class = class_create(THIS_MODULE, "vc-sm"); ++ if (IS_ERR(sm_state->sm_class)) { ++ pr_err("[%s]: unable to create device class\n", __func__); ++ ret = PTR_ERR(sm_state->sm_class); ++ goto out; ++ } ++ ++ /* Create a character driver. ++ */ ++ ret = alloc_chrdev_region(&sm_state->sm_devid, ++ DEVICE_MINOR, 1, DEVICE_NAME); ++ if (ret != 0) { ++ pr_err("[%s]: unable to allocate device number\n", __func__); ++ goto out_dev_class_destroy; ++ } ++ ++ cdev_init(&sm_state->sm_cdev, &vmcs_sm_ops); ++ ret = cdev_add(&sm_state->sm_cdev, sm_state->sm_devid, 1); ++ if (ret != 0) { ++ pr_err("[%s]: unable to register device\n", __func__); ++ goto out_chrdev_unreg; ++ } ++ ++ /* Create a device node. ++ */ ++ sm_state->sm_dev = device_create(sm_state->sm_class, ++ NULL, ++ MKDEV(MAJOR(sm_state->sm_devid), ++ DEVICE_MINOR), NULL, ++ DEVICE_NAME); ++ if (IS_ERR(sm_state->sm_dev)) { ++ pr_err("[%s]: unable to create device node\n", __func__); ++ ret = PTR_ERR(sm_state->sm_dev); ++ goto out_chrdev_del; ++ } ++ ++ goto out; ++ ++out_chrdev_del: ++ cdev_del(&sm_state->sm_cdev); ++out_chrdev_unreg: ++ unregister_chrdev_region(sm_state->sm_devid, 1); ++out_dev_class_destroy: ++ class_destroy(sm_state->sm_class); ++ sm_state->sm_class = NULL; ++out: ++ return ret; ++} ++ ++/* Termination of the device. ++*/ ++static int vc_sm_remove_sharedmemory(void) ++{ ++ int ret; ++ ++ if (sm_state == NULL) { ++ /* Nothing to do. ++ */ ++ ret = 0; ++ goto out; ++ } ++ ++ /* Remove the sharedmemory character driver. ++ */ ++ cdev_del(&sm_state->sm_cdev); ++ ++ /* Unregister region. ++ */ ++ unregister_chrdev_region(sm_state->sm_devid, 1); ++ ++ ret = 0; ++ goto out; ++ ++out: ++ return ret; ++} ++ ++/* Videocore connected. */ ++static void vc_sm_connected_init(void) ++{ ++ int ret; ++ VCHI_INSTANCE_T vchi_instance; ++ VCHI_CONNECTION_T *vchi_connection = NULL; ++ ++ pr_info("[%s]: start\n", __func__); ++ ++ /* Allocate memory for the state structure. ++ */ ++ sm_state = kzalloc(sizeof(struct SM_STATE_T), GFP_KERNEL); ++ if (sm_state == NULL) { ++ pr_err("[%s]: failed to allocate memory\n", __func__); ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++ mutex_init(&sm_state->lock); ++ mutex_init(&sm_state->map_lock); ++ ++ /* Initialize and create a VCHI connection for the shared memory service ++ ** running on videocore. ++ */ ++ ret = vchi_initialise(&vchi_instance); ++ if (ret != 0) { ++ pr_err("[%s]: failed to initialise VCHI instance (ret=%d)\n", ++ __func__, ret); ++ ++ ret = -EIO; ++ goto err_free_mem; ++ } ++ ++ ret = vchi_connect(NULL, 0, vchi_instance); ++ if (ret != 0) { ++ pr_err("[%s]: failed to connect VCHI instance (ret=%d)\n", ++ __func__, ret); ++ ++ ret = -EIO; ++ goto err_free_mem; ++ } ++ ++ /* Initialize an instance of the shared memory service. */ ++ sm_state->sm_handle = ++ vc_vchi_sm_init(vchi_instance, &vchi_connection, 1); ++ if (sm_state->sm_handle == NULL) { ++ pr_err("[%s]: failed to initialize shared memory service\n", ++ __func__); ++ ++ ret = -EPERM; ++ goto err_free_mem; ++ } ++ ++ /* Create a debug fs directory entry (root). */ ++ sm_state->dir_root = debugfs_create_dir(VC_SM_DIR_ROOT_NAME, NULL); ++ if (!sm_state->dir_root) { ++ pr_err("[%s]: failed to create \'%s\' directory entry\n", ++ __func__, VC_SM_DIR_ROOT_NAME); ++ ++ ret = -EPERM; ++ goto err_stop_sm_service; ++ } ++ ++ sm_state->dir_state.show = &vc_sm_global_state_show; ++ sm_state->dir_state.dir_entry = debugfs_create_file(VC_SM_STATE, ++ S_IRUGO, sm_state->dir_root, &sm_state->dir_state, ++ &vc_sm_debug_fs_fops); ++ ++ sm_state->dir_stats.show = &vc_sm_global_statistics_show; ++ sm_state->dir_stats.dir_entry = debugfs_create_file(VC_SM_STATS, ++ S_IRUGO, sm_state->dir_root, &sm_state->dir_stats, ++ &vc_sm_debug_fs_fops); ++ ++ /* Create the proc entry children. */ ++ sm_state->dir_alloc = debugfs_create_dir(VC_SM_DIR_ALLOC_NAME, ++ sm_state->dir_root); ++ ++ /* Create a shared memory device. */ ++ ret = vc_sm_create_sharedmemory(); ++ if (ret != 0) { ++ pr_err("[%s]: failed to create shared memory device\n", ++ __func__); ++ goto err_remove_debugfs; ++ } ++ ++ INIT_LIST_HEAD(&sm_state->map_list); ++ INIT_LIST_HEAD(&sm_state->resource_list); ++ ++ sm_state->data_knl = vc_sm_create_priv_data(0); ++ if (sm_state->data_knl == NULL) { ++ pr_err("[%s]: failed to create kernel private data tracker\n", ++ __func__); ++ goto err_remove_shared_memory; ++ } ++ ++ /* Done! ++ */ ++ sm_inited = 1; ++ goto out; ++ ++err_remove_shared_memory: ++ vc_sm_remove_sharedmemory(); ++err_remove_debugfs: ++ debugfs_remove_recursive(sm_state->dir_root); ++err_stop_sm_service: ++ vc_vchi_sm_stop(&sm_state->sm_handle); ++err_free_mem: ++ kfree(sm_state); ++out: ++ pr_info("[%s]: end - returning %d\n", __func__, ret); ++} ++ ++/* Driver loading. */ ++static int __init vc_sm_init(void) ++{ ++ pr_info("vc-sm: Videocore shared memory driver\n"); ++ vchiq_add_connected_callback(vc_sm_connected_init); ++ return 0; ++} ++ ++/* Driver unloading. */ ++static void __exit vc_sm_exit(void) ++{ ++ pr_debug("[%s]: start\n", __func__); ++ if (sm_inited) { ++ /* Remove shared memory device. ++ */ ++ vc_sm_remove_sharedmemory(); ++ ++ /* Remove all proc entries. ++ */ ++ debugfs_remove_recursive(sm_state->dir_root); ++ ++ /* Stop the videocore shared memory service. ++ */ ++ vc_vchi_sm_stop(&sm_state->sm_handle); ++ ++ /* Free the memory for the state structure. ++ */ ++ mutex_destroy(&(sm_state->map_lock)); ++ kfree(sm_state); ++ } ++ ++ pr_debug("[%s]: end\n", __func__); ++} ++ ++#if defined(__KERNEL__) ++/* Allocate a shared memory handle and block. */ ++int vc_sm_alloc(VC_SM_ALLOC_T *alloc, int *handle) ++{ ++ struct vmcs_sm_ioctl_alloc ioparam = { 0 }; ++ int ret; ++ struct SM_RESOURCE_T *resource; ++ ++ /* Validate we can work with this device. ++ */ ++ if (sm_state == NULL || alloc == NULL || handle == NULL) { ++ pr_err("[%s]: invalid input\n", __func__); ++ return -EPERM; ++ } ++ ++ ioparam.size = alloc->base_unit; ++ ioparam.num = alloc->num_unit; ++ ioparam.cached = ++ alloc->type == VC_SM_ALLOC_CACHED ? VMCS_SM_CACHE_VC : 0; ++ ++ ret = vc_sm_ioctl_alloc(sm_state->data_knl, &ioparam); ++ ++ if (ret == 0) { ++ resource = ++ vmcs_sm_acquire_resource(sm_state->data_knl, ++ ioparam.handle); ++ if (resource) { ++ resource->pid = 0; ++ vmcs_sm_release_resource(resource, 0); ++ ++ /* Assign valid handle at this time. ++ */ ++ *handle = ioparam.handle; ++ } else { ++ ret = -ENOMEM; ++ } ++ } ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vc_sm_alloc); ++ ++/* Get an internal resource handle mapped from the external one. ++*/ ++int vc_sm_int_handle(int handle) ++{ ++ struct SM_RESOURCE_T *resource; ++ int ret = 0; ++ ++ /* Validate we can work with this device. ++ */ ++ if (sm_state == NULL || handle == 0) { ++ pr_err("[%s]: invalid input\n", __func__); ++ return 0; ++ } ++ ++ /* Locate resource from GUID. ++ */ ++ resource = vmcs_sm_acquire_resource(sm_state->data_knl, handle); ++ if (resource) { ++ ret = resource->res_handle; ++ vmcs_sm_release_resource(resource, 0); ++ } ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vc_sm_int_handle); ++ ++/* Free a previously allocated shared memory handle and block. ++*/ ++int vc_sm_free(int handle) ++{ ++ struct vmcs_sm_ioctl_free ioparam = { handle }; ++ ++ /* Validate we can work with this device. ++ */ ++ if (sm_state == NULL || handle == 0) { ++ pr_err("[%s]: invalid input\n", __func__); ++ return -EPERM; ++ } ++ ++ return vc_sm_ioctl_free(sm_state->data_knl, &ioparam); ++} ++EXPORT_SYMBOL_GPL(vc_sm_free); ++ ++/* Lock a memory handle for use by kernel. ++*/ ++int vc_sm_lock(int handle, VC_SM_LOCK_CACHE_MODE_T mode, ++ long unsigned int *data) ++{ ++ struct vmcs_sm_ioctl_lock_unlock ioparam; ++ int ret; ++ ++ /* Validate we can work with this device. ++ */ ++ if (sm_state == NULL || handle == 0 || data == NULL) { ++ pr_err("[%s]: invalid input\n", __func__); ++ return -EPERM; ++ } ++ ++ *data = 0; ++ ++ ioparam.handle = handle; ++ ret = vc_sm_ioctl_lock(sm_state->data_knl, ++ &ioparam, ++ 1, ++ ((mode == ++ VC_SM_LOCK_CACHED) ? VMCS_SM_CACHE_HOST : ++ VMCS_SM_CACHE_NONE), 0); ++ ++ *data = ioparam.addr; ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vc_sm_lock); ++ ++/* Unlock a memory handle in use by kernel. ++*/ ++int vc_sm_unlock(int handle, int flush, int no_vc_unlock) ++{ ++ struct vmcs_sm_ioctl_lock_unlock ioparam; ++ ++ /* Validate we can work with this device. ++ */ ++ if (sm_state == NULL || handle == 0) { ++ pr_err("[%s]: invalid input\n", __func__); ++ return -EPERM; ++ } ++ ++ ioparam.handle = handle; ++ return vc_sm_ioctl_unlock(sm_state->data_knl, ++ &ioparam, flush, 0, no_vc_unlock); ++} ++EXPORT_SYMBOL_GPL(vc_sm_unlock); ++ ++/* Map a shared memory region for use by kernel. ++*/ ++int vc_sm_map(int handle, unsigned int sm_addr, VC_SM_LOCK_CACHE_MODE_T mode, ++ long unsigned int *data) ++{ ++ struct vmcs_sm_ioctl_lock_unlock ioparam; ++ int ret; ++ ++ /* Validate we can work with this device. ++ */ ++ if (sm_state == NULL || handle == 0 || data == NULL || sm_addr == 0) { ++ pr_err("[%s]: invalid input\n", __func__); ++ return -EPERM; ++ } ++ ++ *data = 0; ++ ++ ioparam.handle = handle; ++ ret = vc_sm_ioctl_lock(sm_state->data_knl, ++ &ioparam, ++ 1, ++ ((mode == ++ VC_SM_LOCK_CACHED) ? VMCS_SM_CACHE_HOST : ++ VMCS_SM_CACHE_NONE), sm_addr); ++ ++ *data = ioparam.addr; ++ return ret; ++} ++EXPORT_SYMBOL_GPL(vc_sm_map); ++#endif ++ ++late_initcall(vc_sm_init); ++module_exit(vc_sm_exit); ++ ++MODULE_AUTHOR("Broadcom"); ++MODULE_DESCRIPTION("VideoCore SharedMemory Driver"); ++MODULE_LICENSE("GPL v2"); +--- /dev/null ++++ b/include/linux/broadcom/vmcs_sm_ioctl.h +@@ -0,0 +1,248 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++* ++*****************************************************************************/ ++ ++#if !defined(__VMCS_SM_IOCTL_H__INCLUDED__) ++#define __VMCS_SM_IOCTL_H__INCLUDED__ ++ ++/* ---- Include Files ---------------------------------------------------- */ ++ ++#if defined(__KERNEL__) ++#include /* Needed for standard types */ ++#else ++#include ++#endif ++ ++#include ++ ++/* ---- Constants and Types ---------------------------------------------- */ ++ ++#define VMCS_SM_RESOURCE_NAME 32 ++#define VMCS_SM_RESOURCE_NAME_DEFAULT "sm-host-resource" ++ ++/* Type define used to create unique IOCTL number */ ++#define VMCS_SM_MAGIC_TYPE 'I' ++ ++/* IOCTL commands */ ++enum vmcs_sm_cmd_e { ++ VMCS_SM_CMD_ALLOC = 0x5A, /* Start at 0x5A arbitrarily */ ++ VMCS_SM_CMD_ALLOC_SHARE, ++ VMCS_SM_CMD_LOCK, ++ VMCS_SM_CMD_LOCK_CACHE, ++ VMCS_SM_CMD_UNLOCK, ++ VMCS_SM_CMD_RESIZE, ++ VMCS_SM_CMD_UNMAP, ++ VMCS_SM_CMD_FREE, ++ VMCS_SM_CMD_FLUSH, ++ VMCS_SM_CMD_INVALID, ++ ++ VMCS_SM_CMD_SIZE_USR_HANDLE, ++ VMCS_SM_CMD_CHK_USR_HANDLE, ++ ++ VMCS_SM_CMD_MAPPED_USR_HANDLE, ++ VMCS_SM_CMD_MAPPED_USR_ADDRESS, ++ VMCS_SM_CMD_MAPPED_VC_HDL_FROM_ADDR, ++ VMCS_SM_CMD_MAPPED_VC_HDL_FROM_HDL, ++ VMCS_SM_CMD_MAPPED_VC_ADDR_FROM_HDL, ++ ++ VMCS_SM_CMD_VC_WALK_ALLOC, ++ VMCS_SM_CMD_HOST_WALK_MAP, ++ VMCS_SM_CMD_HOST_WALK_PID_ALLOC, ++ VMCS_SM_CMD_HOST_WALK_PID_MAP, ++ ++ VMCS_SM_CMD_CLEAN_INVALID, ++ ++ VMCS_SM_CMD_LAST /* Do no delete */ ++}; ++ ++/* Cache type supported, conveniently matches the user space definition in ++** user-vcsm.h. ++*/ ++enum vmcs_sm_cache_e { ++ VMCS_SM_CACHE_NONE, ++ VMCS_SM_CACHE_HOST, ++ VMCS_SM_CACHE_VC, ++ VMCS_SM_CACHE_BOTH, ++}; ++ ++/* IOCTL Data structures */ ++struct vmcs_sm_ioctl_alloc { ++ /* user -> kernel */ ++ unsigned int size; ++ unsigned int num; ++ enum vmcs_sm_cache_e cached; ++ char name[VMCS_SM_RESOURCE_NAME]; ++ ++ /* kernel -> user */ ++ unsigned int handle; ++ /* unsigned int base_addr; */ ++}; ++ ++struct vmcs_sm_ioctl_alloc_share { ++ /* user -> kernel */ ++ unsigned int handle; ++ unsigned int size; ++}; ++ ++struct vmcs_sm_ioctl_free { ++ /* user -> kernel */ ++ unsigned int handle; ++ /* unsigned int base_addr; */ ++}; ++ ++struct vmcs_sm_ioctl_lock_unlock { ++ /* user -> kernel */ ++ unsigned int handle; ++ ++ /* kernel -> user */ ++ unsigned int addr; ++}; ++ ++struct vmcs_sm_ioctl_lock_cache { ++ /* user -> kernel */ ++ unsigned int handle; ++ enum vmcs_sm_cache_e cached; ++}; ++ ++struct vmcs_sm_ioctl_resize { ++ /* user -> kernel */ ++ unsigned int handle; ++ unsigned int new_size; ++ ++ /* kernel -> user */ ++ unsigned int old_size; ++}; ++ ++struct vmcs_sm_ioctl_map { ++ /* user -> kernel */ ++ /* and kernel -> user */ ++ unsigned int pid; ++ unsigned int handle; ++ unsigned int addr; ++ ++ /* kernel -> user */ ++ unsigned int size; ++}; ++ ++struct vmcs_sm_ioctl_walk { ++ /* user -> kernel */ ++ unsigned int pid; ++}; ++ ++struct vmcs_sm_ioctl_chk { ++ /* user -> kernel */ ++ unsigned int handle; ++ ++ /* kernel -> user */ ++ unsigned int addr; ++ unsigned int size; ++ enum vmcs_sm_cache_e cache; ++}; ++ ++struct vmcs_sm_ioctl_size { ++ /* user -> kernel */ ++ unsigned int handle; ++ ++ /* kernel -> user */ ++ unsigned int size; ++}; ++ ++struct vmcs_sm_ioctl_cache { ++ /* user -> kernel */ ++ unsigned int handle; ++ unsigned int addr; ++ unsigned int size; ++}; ++ ++struct vmcs_sm_ioctl_clean_invalid { ++ /* user -> kernel */ ++ struct { ++ unsigned int cmd; ++ unsigned int handle; ++ unsigned int addr; ++ unsigned int size; ++ } s[8]; ++}; ++ ++/* IOCTL numbers */ ++#define VMCS_SM_IOCTL_MEM_ALLOC\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_ALLOC,\ ++ struct vmcs_sm_ioctl_alloc) ++#define VMCS_SM_IOCTL_MEM_ALLOC_SHARE\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_ALLOC_SHARE,\ ++ struct vmcs_sm_ioctl_alloc_share) ++#define VMCS_SM_IOCTL_MEM_LOCK\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_LOCK,\ ++ struct vmcs_sm_ioctl_lock_unlock) ++#define VMCS_SM_IOCTL_MEM_LOCK_CACHE\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_LOCK_CACHE,\ ++ struct vmcs_sm_ioctl_lock_cache) ++#define VMCS_SM_IOCTL_MEM_UNLOCK\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_UNLOCK,\ ++ struct vmcs_sm_ioctl_lock_unlock) ++#define VMCS_SM_IOCTL_MEM_RESIZE\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_RESIZE,\ ++ struct vmcs_sm_ioctl_resize) ++#define VMCS_SM_IOCTL_MEM_FREE\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_FREE,\ ++ struct vmcs_sm_ioctl_free) ++#define VMCS_SM_IOCTL_MEM_FLUSH\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_FLUSH,\ ++ struct vmcs_sm_ioctl_cache) ++#define VMCS_SM_IOCTL_MEM_INVALID\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_INVALID,\ ++ struct vmcs_sm_ioctl_cache) ++#define VMCS_SM_IOCTL_MEM_CLEAN_INVALID\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_CLEAN_INVALID,\ ++ struct vmcs_sm_ioctl_clean_invalid) ++ ++#define VMCS_SM_IOCTL_SIZE_USR_HDL\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_SIZE_USR_HANDLE,\ ++ struct vmcs_sm_ioctl_size) ++#define VMCS_SM_IOCTL_CHK_USR_HDL\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_CHK_USR_HANDLE,\ ++ struct vmcs_sm_ioctl_chk) ++ ++#define VMCS_SM_IOCTL_MAP_USR_HDL\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_MAPPED_USR_HANDLE,\ ++ struct vmcs_sm_ioctl_map) ++#define VMCS_SM_IOCTL_MAP_USR_ADDRESS\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_MAPPED_USR_ADDRESS,\ ++ struct vmcs_sm_ioctl_map) ++#define VMCS_SM_IOCTL_MAP_VC_HDL_FR_ADDR\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_MAPPED_VC_HDL_FROM_ADDR,\ ++ struct vmcs_sm_ioctl_map) ++#define VMCS_SM_IOCTL_MAP_VC_HDL_FR_HDL\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_MAPPED_VC_HDL_FROM_HDL,\ ++ struct vmcs_sm_ioctl_map) ++#define VMCS_SM_IOCTL_MAP_VC_ADDR_FR_HDL\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_MAPPED_VC_ADDR_FROM_HDL,\ ++ struct vmcs_sm_ioctl_map) ++ ++#define VMCS_SM_IOCTL_VC_WALK_ALLOC\ ++ _IO(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_VC_WALK_ALLOC) ++#define VMCS_SM_IOCTL_HOST_WALK_MAP\ ++ _IO(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_HOST_WALK_MAP) ++#define VMCS_SM_IOCTL_HOST_WALK_PID_ALLOC\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_HOST_WALK_PID_ALLOC,\ ++ struct vmcs_sm_ioctl_walk) ++#define VMCS_SM_IOCTL_HOST_WALK_PID_MAP\ ++ _IOR(VMCS_SM_MAGIC_TYPE, VMCS_SM_CMD_HOST_WALK_PID_MAP,\ ++ struct vmcs_sm_ioctl_walk) ++ ++/* ---- Variable Externs ------------------------------------------------- */ ++ ++/* ---- Function Prototypes ---------------------------------------------- */ ++ ++#endif /* __VMCS_SM_IOCTL_H__INCLUDED__ */ diff --git a/target/linux/brcm2708/patches-4.9/950-0041-Add-dev-gpiomem-device-for-rootless-user-GPIO-access.patch b/target/linux/brcm2708/patches-4.9/950-0041-Add-dev-gpiomem-device-for-rootless-user-GPIO-access.patch new file mode 100644 index 000000000000..618cb9f8dda8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0041-Add-dev-gpiomem-device-for-rootless-user-GPIO-access.patch @@ -0,0 +1,306 @@ +From 0f326aa0cf8a16ab7f29606b2eda7186f1fb9367 Mon Sep 17 00:00:00 2001 +From: Luke Wren +Date: Fri, 21 Aug 2015 23:14:48 +0100 +Subject: [PATCH] Add /dev/gpiomem device for rootless user GPIO access + +Signed-off-by: Luke Wren + +bcm2835-gpiomem: Fix for ARCH_BCM2835 builds + +Build on ARCH_BCM2835, and fail to probe if no IO resource. + +See: https://github.com/raspberrypi/linux/issues/1154 +--- + drivers/char/broadcom/Kconfig | 9 ++ + drivers/char/broadcom/Makefile | 3 + + drivers/char/broadcom/bcm2835-gpiomem.c | 260 ++++++++++++++++++++++++++++++++ + 3 files changed, 272 insertions(+) + create mode 100644 drivers/char/broadcom/bcm2835-gpiomem.c + +--- a/drivers/char/broadcom/Kconfig ++++ b/drivers/char/broadcom/Kconfig +@@ -32,3 +32,12 @@ config BCM_VC_SM + help + Support for the VC shared memory on the Broadcom reference + design. Uses the VCHIQ stack. ++ ++config BCM2835_DEVGPIOMEM ++ tristate "/dev/gpiomem rootless GPIO access via mmap() on the BCM2835" ++ default m ++ help ++ Provides users with root-free access to the GPIO registers ++ on the 2835. Calling mmap(/dev/gpiomem) will map the GPIO ++ register page to the user's pointer. ++ +--- a/drivers/char/broadcom/Makefile ++++ b/drivers/char/broadcom/Makefile +@@ -1,3 +1,6 @@ + obj-$(CONFIG_BCM_VC_CMA) += vc_cma/ + obj-$(CONFIG_BCM2708_VCMEM) += vc_mem.o + obj-$(CONFIG_BCM_VC_SM) += vc_sm/ ++ ++obj-$(CONFIG_BCM2835_DEVGPIOMEM)+= bcm2835-gpiomem.o ++ +--- /dev/null ++++ b/drivers/char/broadcom/bcm2835-gpiomem.c +@@ -0,0 +1,260 @@ ++/** ++ * GPIO memory device driver ++ * ++ * Creates a chardev /dev/gpiomem which will provide user access to ++ * the BCM2835's GPIO registers when it is mmap()'d. ++ * No longer need root for user GPIO access, but without relaxing permissions ++ * on /dev/mem. ++ * ++ * Written by Luke Wren ++ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") version 2, as published by the Free ++ * Software Foundation. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define DEVICE_NAME "bcm2835-gpiomem" ++#define DRIVER_NAME "gpiomem-bcm2835" ++#define DEVICE_MINOR 0 ++ ++struct bcm2835_gpiomem_instance { ++ unsigned long gpio_regs_phys; ++ struct device *dev; ++}; ++ ++static struct cdev bcm2835_gpiomem_cdev; ++static dev_t bcm2835_gpiomem_devid; ++static struct class *bcm2835_gpiomem_class; ++static struct device *bcm2835_gpiomem_dev; ++static struct bcm2835_gpiomem_instance *inst; ++ ++ ++/**************************************************************************** ++* ++* GPIO mem chardev file ops ++* ++***************************************************************************/ ++ ++static int bcm2835_gpiomem_open(struct inode *inode, struct file *file) ++{ ++ int dev = iminor(inode); ++ int ret = 0; ++ ++ dev_info(inst->dev, "gpiomem device opened."); ++ ++ if (dev != DEVICE_MINOR) { ++ dev_err(inst->dev, "Unknown minor device: %d", dev); ++ ret = -ENXIO; ++ } ++ return ret; ++} ++ ++static int bcm2835_gpiomem_release(struct inode *inode, struct file *file) ++{ ++ int dev = iminor(inode); ++ int ret = 0; ++ ++ if (dev != DEVICE_MINOR) { ++ dev_err(inst->dev, "Unknown minor device %d", dev); ++ ret = -ENXIO; ++ } ++ return ret; ++} ++ ++static const struct vm_operations_struct bcm2835_gpiomem_vm_ops = { ++#ifdef CONFIG_HAVE_IOREMAP_PROT ++ .access = generic_access_phys ++#endif ++}; ++ ++static int bcm2835_gpiomem_mmap(struct file *file, struct vm_area_struct *vma) ++{ ++ /* Ignore what the user says - they're getting the GPIO regs ++ whether they like it or not! */ ++ unsigned long gpio_page = inst->gpio_regs_phys >> PAGE_SHIFT; ++ ++ vma->vm_page_prot = phys_mem_access_prot(file, gpio_page, ++ PAGE_SIZE, ++ vma->vm_page_prot); ++ vma->vm_ops = &bcm2835_gpiomem_vm_ops; ++ if (remap_pfn_range(vma, vma->vm_start, ++ gpio_page, ++ PAGE_SIZE, ++ vma->vm_page_prot)) { ++ return -EAGAIN; ++ } ++ return 0; ++} ++ ++static const struct file_operations ++bcm2835_gpiomem_fops = { ++ .owner = THIS_MODULE, ++ .open = bcm2835_gpiomem_open, ++ .release = bcm2835_gpiomem_release, ++ .mmap = bcm2835_gpiomem_mmap, ++}; ++ ++ ++ /**************************************************************************** ++* ++* Probe and remove functions ++* ++***************************************************************************/ ++ ++ ++static int bcm2835_gpiomem_probe(struct platform_device *pdev) ++{ ++ int err; ++ void *ptr_err; ++ struct device *dev = &pdev->dev; ++ struct resource *ioresource; ++ ++ /* Allocate buffers and instance data */ ++ ++ inst = kzalloc(sizeof(struct bcm2835_gpiomem_instance), GFP_KERNEL); ++ ++ if (!inst) { ++ err = -ENOMEM; ++ goto failed_inst_alloc; ++ } ++ ++ inst->dev = dev; ++ ++ ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (ioresource) { ++ inst->gpio_regs_phys = ioresource->start; ++ } else { ++ dev_err(inst->dev, "failed to get IO resource"); ++ err = -ENOENT; ++ goto failed_get_resource; ++ } ++ ++ /* Create character device entries */ ++ ++ err = alloc_chrdev_region(&bcm2835_gpiomem_devid, ++ DEVICE_MINOR, 1, DEVICE_NAME); ++ if (err != 0) { ++ dev_err(inst->dev, "unable to allocate device number"); ++ goto failed_alloc_chrdev; ++ } ++ cdev_init(&bcm2835_gpiomem_cdev, &bcm2835_gpiomem_fops); ++ bcm2835_gpiomem_cdev.owner = THIS_MODULE; ++ err = cdev_add(&bcm2835_gpiomem_cdev, bcm2835_gpiomem_devid, 1); ++ if (err != 0) { ++ dev_err(inst->dev, "unable to register device"); ++ goto failed_cdev_add; ++ } ++ ++ /* Create sysfs entries */ ++ ++ bcm2835_gpiomem_class = class_create(THIS_MODULE, DEVICE_NAME); ++ ptr_err = bcm2835_gpiomem_class; ++ if (IS_ERR(ptr_err)) ++ goto failed_class_create; ++ ++ bcm2835_gpiomem_dev = device_create(bcm2835_gpiomem_class, NULL, ++ bcm2835_gpiomem_devid, NULL, ++ "gpiomem"); ++ ptr_err = bcm2835_gpiomem_dev; ++ if (IS_ERR(ptr_err)) ++ goto failed_device_create; ++ ++ dev_info(inst->dev, "Initialised: Registers at 0x%08lx", ++ inst->gpio_regs_phys); ++ ++ return 0; ++ ++failed_device_create: ++ class_destroy(bcm2835_gpiomem_class); ++failed_class_create: ++ cdev_del(&bcm2835_gpiomem_cdev); ++ err = PTR_ERR(ptr_err); ++failed_cdev_add: ++ unregister_chrdev_region(bcm2835_gpiomem_devid, 1); ++failed_alloc_chrdev: ++failed_get_resource: ++ kfree(inst); ++failed_inst_alloc: ++ dev_err(inst->dev, "could not load bcm2835_gpiomem"); ++ return err; ++} ++ ++static int bcm2835_gpiomem_remove(struct platform_device *pdev) ++{ ++ struct device *dev = inst->dev; ++ ++ kfree(inst); ++ device_destroy(bcm2835_gpiomem_class, bcm2835_gpiomem_devid); ++ class_destroy(bcm2835_gpiomem_class); ++ cdev_del(&bcm2835_gpiomem_cdev); ++ unregister_chrdev_region(bcm2835_gpiomem_devid, 1); ++ ++ dev_info(dev, "GPIO mem driver removed - OK"); ++ return 0; ++} ++ ++ /**************************************************************************** ++* ++* Register the driver with device tree ++* ++***************************************************************************/ ++ ++static const struct of_device_id bcm2835_gpiomem_of_match[] = { ++ {.compatible = "brcm,bcm2835-gpiomem",}, ++ { /* sentinel */ }, ++}; ++ ++MODULE_DEVICE_TABLE(of, bcm2835_gpiomem_of_match); ++ ++static struct platform_driver bcm2835_gpiomem_driver = { ++ .probe = bcm2835_gpiomem_probe, ++ .remove = bcm2835_gpiomem_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2835_gpiomem_of_match, ++ }, ++}; ++ ++module_platform_driver(bcm2835_gpiomem_driver); ++ ++MODULE_ALIAS("platform:gpiomem-bcm2835"); ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("gpiomem driver for accessing GPIO from userspace"); ++MODULE_AUTHOR("Luke Wren "); diff --git a/target/linux/brcm2708/patches-4.9/950-0042-Add-SMI-driver.patch b/target/linux/brcm2708/patches-4.9/950-0042-Add-SMI-driver.patch new file mode 100644 index 000000000000..3d75e705ba7e --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0042-Add-SMI-driver.patch @@ -0,0 +1,1930 @@ +From 8b3f935c48ff65dfb8985ce3e6c631530cd1471a Mon Sep 17 00:00:00 2001 +From: Luke Wren +Date: Sat, 5 Sep 2015 01:14:45 +0100 +Subject: [PATCH] Add SMI driver + +Signed-off-by: Luke Wren +--- + .../bindings/misc/brcm,bcm2835-smi-dev.txt | 17 + + .../devicetree/bindings/misc/brcm,bcm2835-smi.txt | 48 + + drivers/char/broadcom/Kconfig | 8 + + drivers/char/broadcom/Makefile | 2 +- + drivers/char/broadcom/bcm2835_smi_dev.c | 402 +++++++++ + drivers/misc/Kconfig | 8 + + drivers/misc/Makefile | 1 + + drivers/misc/bcm2835_smi.c | 985 +++++++++++++++++++++ + include/linux/broadcom/bcm2835_smi.h | 391 ++++++++ + 9 files changed, 1861 insertions(+), 1 deletion(-) + create mode 100644 Documentation/devicetree/bindings/misc/brcm,bcm2835-smi-dev.txt + create mode 100644 Documentation/devicetree/bindings/misc/brcm,bcm2835-smi.txt + create mode 100644 drivers/char/broadcom/bcm2835_smi_dev.c + create mode 100644 drivers/misc/bcm2835_smi.c + create mode 100644 include/linux/broadcom/bcm2835_smi.h + +--- /dev/null ++++ b/Documentation/devicetree/bindings/misc/brcm,bcm2835-smi-dev.txt +@@ -0,0 +1,17 @@ ++* Broadcom BCM2835 SMI character device driver. ++ ++SMI or secondary memory interface is a peripheral specific to certain Broadcom ++SOCs, and is helpful for talking to things like parallel-interface displays ++and NAND flashes (in fact, most things with a parallel register interface). ++ ++This driver adds a character device which provides a user-space interface to ++an instance of the SMI driver. ++ ++Required properties: ++- compatible: "brcm,bcm2835-smi-dev" ++- smi_handle: a phandle to the smi node. ++ ++Optional properties: ++- None. ++ ++ +--- /dev/null ++++ b/Documentation/devicetree/bindings/misc/brcm,bcm2835-smi.txt +@@ -0,0 +1,48 @@ ++* Broadcom BCM2835 SMI driver. ++ ++SMI or secondary memory interface is a peripheral specific to certain Broadcom ++SOCs, and is helpful for talking to things like parallel-interface displays ++and NAND flashes (in fact, most things with a parallel register interface). ++ ++Required properties: ++- compatible: "brcm,bcm2835-smi" ++- reg: Should contain location and length of SMI registers and SMI clkman regs ++- interrupts: *the* SMI interrupt. ++- pinctrl-names: should be "default". ++- pinctrl-0: the phandle of the gpio pin node. ++- brcm,smi-clock-source: the clock source for clkman ++- brcm,smi-clock-divisor: the integer clock divisor for clkman ++- dmas: the dma controller phandle and the DREQ number (4 on a 2835) ++- dma-names: the name used by the driver to request its channel. ++ Should be "rx-tx". ++ ++Optional properties: ++- None. ++ ++Examples: ++ ++8 data pin configuration: ++ ++smi: smi@7e600000 { ++ compatible = "brcm,bcm2835-smi"; ++ reg = <0x7e600000 0x44>, <0x7e1010b0 0x8>; ++ interrupts = <2 16>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&smi_pins>; ++ brcm,smi-clock-source = <6>; ++ brcm,smi-clock-divisor = <4>; ++ dmas = <&dma 4>; ++ dma-names = "rx-tx"; ++ ++ status = "okay"; ++}; ++ ++smi_pins: smi_pins { ++ brcm,pins = <2 3 4 5 6 7 8 9 10 11 12 13 14 15>; ++ /* Alt 1: SMI */ ++ brcm,function = <5 5 5 5 5 5 5 5 5 5 5 5 5 5>; ++ /* /CS, /WE and /OE are pulled high, as they are ++ generally active low signals */ ++ brcm,pull = <2 2 2 2 2 2 0 0 0 0 0 0 0 0>; ++}; ++ +--- a/drivers/char/broadcom/Kconfig ++++ b/drivers/char/broadcom/Kconfig +@@ -41,3 +41,11 @@ config BCM2835_DEVGPIOMEM + on the 2835. Calling mmap(/dev/gpiomem) will map the GPIO + register page to the user's pointer. + ++config BCM2835_SMI_DEV ++ tristate "Character device driver for BCM2835 Secondary Memory Interface" ++ depends on BCM2835_SMI ++ default m ++ help ++ This driver provides a character device interface (ioctl + read/write) to ++ Broadcom's Secondary Memory interface. The low-level functionality is provided ++ by the SMI driver itself. +--- a/drivers/char/broadcom/Makefile ++++ b/drivers/char/broadcom/Makefile +@@ -3,4 +3,4 @@ obj-$(CONFIG_BCM2708_VCMEM) += vc_mem.o + obj-$(CONFIG_BCM_VC_SM) += vc_sm/ + + obj-$(CONFIG_BCM2835_DEVGPIOMEM)+= bcm2835-gpiomem.o +- ++obj-$(CONFIG_BCM2835_SMI_DEV) += bcm2835_smi_dev.o +--- /dev/null ++++ b/drivers/char/broadcom/bcm2835_smi_dev.c +@@ -0,0 +1,402 @@ ++/** ++ * Character device driver for Broadcom Secondary Memory Interface ++ * ++ * Written by Luke Wren ++ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") version 2, as published by the Free ++ * Software Foundation. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define DEVICE_NAME "bcm2835-smi-dev" ++#define DRIVER_NAME "smi-dev-bcm2835" ++#define DEVICE_MINOR 0 ++ ++static struct cdev bcm2835_smi_cdev; ++static dev_t bcm2835_smi_devid; ++static struct class *bcm2835_smi_class; ++static struct device *bcm2835_smi_dev; ++ ++struct bcm2835_smi_dev_instance { ++ struct device *dev; ++}; ++ ++static struct bcm2835_smi_instance *smi_inst; ++static struct bcm2835_smi_dev_instance *inst; ++ ++static const char *const ioctl_names[] = { ++ "READ_SETTINGS", ++ "WRITE_SETTINGS", ++ "ADDRESS" ++}; ++ ++/**************************************************************************** ++* ++* SMI chardev file ops ++* ++***************************************************************************/ ++static long ++bcm2835_smi_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ long ret = 0; ++ ++ dev_info(inst->dev, "serving ioctl..."); ++ ++ switch (cmd) { ++ case BCM2835_SMI_IOC_GET_SETTINGS:{ ++ struct smi_settings *settings; ++ ++ dev_info(inst->dev, "Reading SMI settings to user."); ++ settings = bcm2835_smi_get_settings_from_regs(smi_inst); ++ if (copy_to_user((void *)arg, settings, ++ sizeof(struct smi_settings))) ++ dev_err(inst->dev, "settings copy failed."); ++ break; ++ } ++ case BCM2835_SMI_IOC_WRITE_SETTINGS:{ ++ struct smi_settings *settings; ++ ++ dev_info(inst->dev, "Setting user's SMI settings."); ++ settings = bcm2835_smi_get_settings_from_regs(smi_inst); ++ if (copy_from_user(settings, (void *)arg, ++ sizeof(struct smi_settings))) ++ dev_err(inst->dev, "settings copy failed."); ++ else ++ bcm2835_smi_set_regs_from_settings(smi_inst); ++ break; ++ } ++ case BCM2835_SMI_IOC_ADDRESS: ++ dev_info(inst->dev, "SMI address set: 0x%02x", (int)arg); ++ bcm2835_smi_set_address(smi_inst, arg); ++ break; ++ default: ++ dev_err(inst->dev, "invalid ioctl cmd: %d", cmd); ++ ret = -ENOTTY; ++ break; ++ } ++ ++ return ret; ++} ++ ++static int bcm2835_smi_open(struct inode *inode, struct file *file) ++{ ++ int dev = iminor(inode); ++ ++ dev_dbg(inst->dev, "SMI device opened."); ++ ++ if (dev != DEVICE_MINOR) { ++ dev_err(inst->dev, ++ "bcm2835_smi_release: Unknown minor device: %d", ++ dev); ++ return -ENXIO; ++ } ++ ++ return 0; ++} ++ ++static int bcm2835_smi_release(struct inode *inode, struct file *file) ++{ ++ int dev = iminor(inode); ++ ++ if (dev != DEVICE_MINOR) { ++ dev_err(inst->dev, ++ "bcm2835_smi_release: Unknown minor device %d", dev); ++ return -ENXIO; ++ } ++ ++ return 0; ++} ++ ++static ssize_t dma_bounce_user( ++ enum dma_transfer_direction dma_dir, ++ char __user *user_ptr, ++ size_t count, ++ struct bcm2835_smi_bounce_info *bounce) ++{ ++ int chunk_size; ++ int chunk_no = 0; ++ int count_left = count; ++ ++ while (count_left) { ++ int rv; ++ void *buf; ++ ++ /* Wait for current chunk to complete: */ ++ if (down_timeout(&bounce->callback_sem, ++ msecs_to_jiffies(1000))) { ++ dev_err(inst->dev, "DMA bounce timed out"); ++ count -= (count_left); ++ break; ++ } ++ ++ if (bounce->callback_sem.count >= DMA_BOUNCE_BUFFER_COUNT - 1) ++ dev_err(inst->dev, "WARNING: Ring buffer overflow"); ++ chunk_size = count_left > DMA_BOUNCE_BUFFER_SIZE ? ++ DMA_BOUNCE_BUFFER_SIZE : count_left; ++ buf = bounce->buffer[chunk_no % DMA_BOUNCE_BUFFER_COUNT]; ++ if (dma_dir == DMA_DEV_TO_MEM) ++ rv = copy_to_user(user_ptr, buf, chunk_size); ++ else ++ rv = copy_from_user(buf, user_ptr, chunk_size); ++ if (rv) ++ dev_err(inst->dev, "copy_*_user() failed!: %d", rv); ++ user_ptr += chunk_size; ++ count_left -= chunk_size; ++ chunk_no++; ++ } ++ return count; ++} ++ ++static ssize_t ++bcm2835_read_file(struct file *f, char __user *user_ptr, ++ size_t count, loff_t *offs) ++{ ++ int odd_bytes; ++ ++ dev_dbg(inst->dev, "User reading %d bytes from SMI.", count); ++ /* We don't want to DMA a number of bytes % 4 != 0 (32 bit FIFO) */ ++ if (count > DMA_THRESHOLD_BYTES) ++ odd_bytes = count & 0x3; ++ else ++ odd_bytes = count; ++ count -= odd_bytes; ++ if (count) { ++ struct bcm2835_smi_bounce_info *bounce; ++ ++ count = bcm2835_smi_user_dma(smi_inst, ++ DMA_DEV_TO_MEM, user_ptr, count, ++ &bounce); ++ if (count) ++ count = dma_bounce_user(DMA_DEV_TO_MEM, user_ptr, ++ count, bounce); ++ } ++ if (odd_bytes) { ++ /* Read from FIFO directly if not using DMA */ ++ uint8_t buf[DMA_THRESHOLD_BYTES]; ++ ++ bcm2835_smi_read_buf(smi_inst, buf, odd_bytes); ++ if (copy_to_user(user_ptr, buf, odd_bytes)) ++ dev_err(inst->dev, "copy_to_user() failed."); ++ count += odd_bytes; ++ ++ } ++ return count; ++} ++ ++static ssize_t ++bcm2835_write_file(struct file *f, const char __user *user_ptr, ++ size_t count, loff_t *offs) ++{ ++ int odd_bytes; ++ ++ dev_dbg(inst->dev, "User writing %d bytes to SMI.", count); ++ if (count > DMA_THRESHOLD_BYTES) ++ odd_bytes = count & 0x3; ++ else ++ odd_bytes = count; ++ count -= odd_bytes; ++ if (count) { ++ struct bcm2835_smi_bounce_info *bounce; ++ ++ count = bcm2835_smi_user_dma(smi_inst, ++ DMA_MEM_TO_DEV, (char __user *)user_ptr, count, ++ &bounce); ++ if (count) ++ count = dma_bounce_user(DMA_MEM_TO_DEV, ++ (char __user *)user_ptr, ++ count, bounce); ++ } ++ if (odd_bytes) { ++ uint8_t buf[DMA_THRESHOLD_BYTES]; ++ ++ if (copy_from_user(buf, user_ptr, odd_bytes)) ++ dev_err(inst->dev, "copy_from_user() failed."); ++ else ++ bcm2835_smi_write_buf(smi_inst, buf, odd_bytes); ++ count += odd_bytes; ++ } ++ return count; ++} ++ ++static const struct file_operations ++bcm2835_smi_fops = { ++ .owner = THIS_MODULE, ++ .unlocked_ioctl = bcm2835_smi_ioctl, ++ .open = bcm2835_smi_open, ++ .release = bcm2835_smi_release, ++ .read = bcm2835_read_file, ++ .write = bcm2835_write_file, ++}; ++ ++ ++/**************************************************************************** ++* ++* bcm2835_smi_probe - called when the driver is loaded. ++* ++***************************************************************************/ ++ ++static int bcm2835_smi_dev_probe(struct platform_device *pdev) ++{ ++ int err; ++ void *ptr_err; ++ struct device *dev = &pdev->dev; ++ struct device_node *node = dev->of_node, *smi_node; ++ ++ if (!node) { ++ dev_err(dev, "No device tree node supplied!"); ++ return -EINVAL; ++ } ++ ++ smi_node = of_parse_phandle(node, "smi_handle", 0); ++ ++ if (!smi_node) { ++ dev_err(dev, "No such property: smi_handle"); ++ return -ENXIO; ++ } ++ ++ smi_inst = bcm2835_smi_get(smi_node); ++ ++ if (!smi_inst) ++ return -EPROBE_DEFER; ++ ++ /* Allocate buffers and instance data */ ++ ++ inst = devm_kzalloc(dev, sizeof(*inst), GFP_KERNEL); ++ ++ if (!inst) ++ return -ENOMEM; ++ ++ inst->dev = dev; ++ ++ /* Create character device entries */ ++ ++ err = alloc_chrdev_region(&bcm2835_smi_devid, ++ DEVICE_MINOR, 1, DEVICE_NAME); ++ if (err != 0) { ++ dev_err(inst->dev, "unable to allocate device number"); ++ return -ENOMEM; ++ } ++ cdev_init(&bcm2835_smi_cdev, &bcm2835_smi_fops); ++ bcm2835_smi_cdev.owner = THIS_MODULE; ++ err = cdev_add(&bcm2835_smi_cdev, bcm2835_smi_devid, 1); ++ if (err != 0) { ++ dev_err(inst->dev, "unable to register device"); ++ err = -ENOMEM; ++ goto failed_cdev_add; ++ } ++ ++ /* Create sysfs entries */ ++ ++ bcm2835_smi_class = class_create(THIS_MODULE, DEVICE_NAME); ++ ptr_err = bcm2835_smi_class; ++ if (IS_ERR(ptr_err)) ++ goto failed_class_create; ++ ++ bcm2835_smi_dev = device_create(bcm2835_smi_class, NULL, ++ bcm2835_smi_devid, NULL, ++ "smi"); ++ ptr_err = bcm2835_smi_dev; ++ if (IS_ERR(ptr_err)) ++ goto failed_device_create; ++ ++ dev_info(inst->dev, "initialised"); ++ ++ return 0; ++ ++failed_device_create: ++ class_destroy(bcm2835_smi_class); ++failed_class_create: ++ cdev_del(&bcm2835_smi_cdev); ++ err = PTR_ERR(ptr_err); ++failed_cdev_add: ++ unregister_chrdev_region(bcm2835_smi_devid, 1); ++ dev_err(dev, "could not load bcm2835_smi_dev"); ++ return err; ++} ++ ++/**************************************************************************** ++* ++* bcm2835_smi_remove - called when the driver is unloaded. ++* ++***************************************************************************/ ++ ++static int bcm2835_smi_dev_remove(struct platform_device *pdev) ++{ ++ device_destroy(bcm2835_smi_class, bcm2835_smi_devid); ++ class_destroy(bcm2835_smi_class); ++ cdev_del(&bcm2835_smi_cdev); ++ unregister_chrdev_region(bcm2835_smi_devid, 1); ++ ++ dev_info(inst->dev, "SMI character dev removed - OK"); ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* Register the driver with device tree ++* ++***************************************************************************/ ++ ++static const struct of_device_id bcm2835_smi_dev_of_match[] = { ++ {.compatible = "brcm,bcm2835-smi-dev",}, ++ { /* sentinel */ }, ++}; ++ ++MODULE_DEVICE_TABLE(of, bcm2835_smi_dev_of_match); ++ ++static struct platform_driver bcm2835_smi_dev_driver = { ++ .probe = bcm2835_smi_dev_probe, ++ .remove = bcm2835_smi_dev_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2835_smi_dev_of_match, ++ }, ++}; ++ ++module_platform_driver(bcm2835_smi_dev_driver); ++ ++MODULE_ALIAS("platform:smi-dev-bcm2835"); ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION( ++ "Character device driver for BCM2835's secondary memory interface"); ++MODULE_AUTHOR("Luke Wren "); +--- a/drivers/misc/Kconfig ++++ b/drivers/misc/Kconfig +@@ -10,6 +10,14 @@ config SENSORS_LIS3LV02D + select INPUT_POLLDEV + default n + ++config BCM2835_SMI ++ tristate "Broadcom 283x Secondary Memory Interface driver" ++ depends on ARCH_BCM2835 ++ default m ++ help ++ Driver for enabling and using Broadcom's Secondary/Slow Memory Interface. ++ Appears as /dev/bcm2835_smi. For ioctl interface see drivers/misc/bcm2835_smi.h ++ + config AD525X_DPOT + tristate "Analog Devices Digital Potentiometers" + depends on (I2C || SPI) && SYSFS +--- a/drivers/misc/Makefile ++++ b/drivers/misc/Makefile +@@ -9,6 +9,7 @@ obj-$(CONFIG_AD525X_DPOT_SPI) += ad525x_ + obj-$(CONFIG_INTEL_MID_PTI) += pti.o + obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o + obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o ++obj-$(CONFIG_BCM2835_SMI) += bcm2835_smi.o + obj-$(CONFIG_DUMMY_IRQ) += dummy-irq.o + obj-$(CONFIG_ICS932S401) += ics932s401.o + obj-$(CONFIG_LKDTM) += lkdtm.o +--- /dev/null ++++ b/drivers/misc/bcm2835_smi.c +@@ -0,0 +1,985 @@ ++/** ++ * Broadcom Secondary Memory Interface driver ++ * ++ * Written by Luke Wren ++ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") version 2, as published by the Free ++ * Software Foundation. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define BCM2835_SMI_IMPLEMENTATION ++#include ++ ++#define DRIVER_NAME "smi-bcm2835" ++ ++#define N_PAGES_FROM_BYTES(n) ((n + PAGE_SIZE-1) / PAGE_SIZE) ++ ++#define DMA_WRITE_TO_MEM true ++#define DMA_READ_FROM_MEM false ++ ++struct bcm2835_smi_instance { ++ struct device *dev; ++ struct smi_settings settings; ++ __iomem void *smi_regs_ptr, *cm_smi_regs_ptr; ++ dma_addr_t smi_regs_busaddr; ++ ++ struct dma_chan *dma_chan; ++ struct dma_slave_config dma_config; ++ ++ struct bcm2835_smi_bounce_info bounce; ++ ++ struct scatterlist buffer_sgl; ++ ++ int clock_source; ++ int clock_divisor; ++ ++ /* Sometimes we are called into in an atomic context (e.g. by ++ JFFS2 + MTD) so we can't use a mutex */ ++ spinlock_t transaction_lock; ++}; ++ ++/**************************************************************************** ++* ++* SMI clock manager setup ++* ++***************************************************************************/ ++ ++static inline void write_smi_cm_reg(struct bcm2835_smi_instance *inst, ++ u32 val, unsigned reg) ++{ ++ writel(CM_PWD | val, inst->cm_smi_regs_ptr + reg); ++} ++ ++static inline u32 read_smi_cm_reg(struct bcm2835_smi_instance *inst, ++ unsigned reg) ++{ ++ return readl(inst->cm_smi_regs_ptr + reg); ++} ++ ++static void smi_setup_clock(struct bcm2835_smi_instance *inst) ++{ ++ dev_dbg(inst->dev, "Setting up clock..."); ++ /* Disable SMI clock and wait for it to stop. */ ++ write_smi_cm_reg(inst, 0, CM_SMI_CTL); ++ while (read_smi_cm_reg(inst, CM_SMI_CTL) & CM_SMI_CTL_BUSY) ++ ; ++ ++ write_smi_cm_reg(inst, (inst->clock_divisor << CM_SMI_DIV_DIVI_OFFS), ++ CM_SMI_DIV); ++ write_smi_cm_reg(inst, (inst->clock_source << CM_SMI_CTL_SRC_OFFS), ++ CM_SMI_CTL); ++ ++ /* Enable the clock */ ++ write_smi_cm_reg(inst, (inst->clock_source << CM_SMI_CTL_SRC_OFFS) | ++ CM_SMI_CTL_ENAB, CM_SMI_CTL); ++} ++ ++/**************************************************************************** ++* ++* SMI peripheral setup ++* ++***************************************************************************/ ++ ++static inline void write_smi_reg(struct bcm2835_smi_instance *inst, ++ u32 val, unsigned reg) ++{ ++ writel(val, inst->smi_regs_ptr + reg); ++} ++ ++static inline u32 read_smi_reg(struct bcm2835_smi_instance *inst, unsigned reg) ++{ ++ return readl(inst->smi_regs_ptr + reg); ++} ++ ++/* Token-paste macro for e.g SMIDSR_RSTROBE -> value of SMIDSR_RSTROBE_MASK */ ++#define _CONCAT(x, y) x##y ++#define CONCAT(x, y) _CONCAT(x, y) ++ ++#define SET_BIT_FIELD(dest, field, bits) ((dest) = \ ++ ((dest) & ~CONCAT(field, _MASK)) | (((bits) << CONCAT(field, _OFFS))& \ ++ CONCAT(field, _MASK))) ++#define GET_BIT_FIELD(src, field) (((src) & \ ++ CONCAT(field, _MASK)) >> CONCAT(field, _OFFS)) ++ ++static void smi_dump_context_labelled(struct bcm2835_smi_instance *inst, ++ const char *label) ++{ ++ dev_err(inst->dev, "SMI context dump: %s", label); ++ dev_err(inst->dev, "SMICS: 0x%08x", read_smi_reg(inst, SMICS)); ++ dev_err(inst->dev, "SMIL: 0x%08x", read_smi_reg(inst, SMIL)); ++ dev_err(inst->dev, "SMIDSR: 0x%08x", read_smi_reg(inst, SMIDSR0)); ++ dev_err(inst->dev, "SMIDSW: 0x%08x", read_smi_reg(inst, SMIDSW0)); ++ dev_err(inst->dev, "SMIDC: 0x%08x", read_smi_reg(inst, SMIDC)); ++ dev_err(inst->dev, "SMIFD: 0x%08x", read_smi_reg(inst, SMIFD)); ++ dev_err(inst->dev, " "); ++} ++ ++static inline void smi_dump_context(struct bcm2835_smi_instance *inst) ++{ ++ smi_dump_context_labelled(inst, ""); ++} ++ ++static void smi_get_default_settings(struct bcm2835_smi_instance *inst) ++{ ++ struct smi_settings *settings = &inst->settings; ++ ++ settings->data_width = SMI_WIDTH_16BIT; ++ settings->pack_data = true; ++ ++ settings->read_setup_time = 1; ++ settings->read_hold_time = 1; ++ settings->read_pace_time = 1; ++ settings->read_strobe_time = 3; ++ ++ settings->write_setup_time = settings->read_setup_time; ++ settings->write_hold_time = settings->read_hold_time; ++ settings->write_pace_time = settings->read_pace_time; ++ settings->write_strobe_time = settings->read_strobe_time; ++ ++ settings->dma_enable = true; ++ settings->dma_passthrough_enable = false; ++ settings->dma_read_thresh = 0x01; ++ settings->dma_write_thresh = 0x3f; ++ settings->dma_panic_read_thresh = 0x20; ++ settings->dma_panic_write_thresh = 0x20; ++} ++ ++void bcm2835_smi_set_regs_from_settings(struct bcm2835_smi_instance *inst) ++{ ++ struct smi_settings *settings = &inst->settings; ++ int smidsr_temp = 0, smidsw_temp = 0, smics_temp, ++ smidcs_temp, smidc_temp = 0; ++ ++ spin_lock(&inst->transaction_lock); ++ ++ /* temporarily disable the peripheral: */ ++ smics_temp = read_smi_reg(inst, SMICS); ++ write_smi_reg(inst, 0, SMICS); ++ smidcs_temp = read_smi_reg(inst, SMIDCS); ++ write_smi_reg(inst, 0, SMIDCS); ++ ++ if (settings->pack_data) ++ smics_temp |= SMICS_PXLDAT; ++ else ++ smics_temp &= ~SMICS_PXLDAT; ++ ++ SET_BIT_FIELD(smidsr_temp, SMIDSR_RWIDTH, settings->data_width); ++ SET_BIT_FIELD(smidsr_temp, SMIDSR_RSETUP, settings->read_setup_time); ++ SET_BIT_FIELD(smidsr_temp, SMIDSR_RHOLD, settings->read_hold_time); ++ SET_BIT_FIELD(smidsr_temp, SMIDSR_RPACE, settings->read_pace_time); ++ SET_BIT_FIELD(smidsr_temp, SMIDSR_RSTROBE, settings->read_strobe_time); ++ write_smi_reg(inst, smidsr_temp, SMIDSR0); ++ ++ SET_BIT_FIELD(smidsw_temp, SMIDSW_WWIDTH, settings->data_width); ++ if (settings->data_width == SMI_WIDTH_8BIT) ++ smidsw_temp |= SMIDSW_WSWAP; ++ else ++ smidsw_temp &= ~SMIDSW_WSWAP; ++ SET_BIT_FIELD(smidsw_temp, SMIDSW_WSETUP, settings->write_setup_time); ++ SET_BIT_FIELD(smidsw_temp, SMIDSW_WHOLD, settings->write_hold_time); ++ SET_BIT_FIELD(smidsw_temp, SMIDSW_WPACE, settings->write_pace_time); ++ SET_BIT_FIELD(smidsw_temp, SMIDSW_WSTROBE, ++ settings->write_strobe_time); ++ write_smi_reg(inst, smidsw_temp, SMIDSW0); ++ ++ SET_BIT_FIELD(smidc_temp, SMIDC_REQR, settings->dma_read_thresh); ++ SET_BIT_FIELD(smidc_temp, SMIDC_REQW, settings->dma_write_thresh); ++ SET_BIT_FIELD(smidc_temp, SMIDC_PANICR, ++ settings->dma_panic_read_thresh); ++ SET_BIT_FIELD(smidc_temp, SMIDC_PANICW, ++ settings->dma_panic_write_thresh); ++ if (settings->dma_passthrough_enable) { ++ smidc_temp |= SMIDC_DMAP; ++ smidsr_temp |= SMIDSR_RDREQ; ++ write_smi_reg(inst, smidsr_temp, SMIDSR0); ++ smidsw_temp |= SMIDSW_WDREQ; ++ write_smi_reg(inst, smidsw_temp, SMIDSW0); ++ } else ++ smidc_temp &= ~SMIDC_DMAP; ++ if (settings->dma_enable) ++ smidc_temp |= SMIDC_DMAEN; ++ else ++ smidc_temp &= ~SMIDC_DMAEN; ++ ++ write_smi_reg(inst, smidc_temp, SMIDC); ++ ++ /* re-enable (if was previously enabled) */ ++ write_smi_reg(inst, smics_temp, SMICS); ++ write_smi_reg(inst, smidcs_temp, SMIDCS); ++ ++ spin_unlock(&inst->transaction_lock); ++} ++EXPORT_SYMBOL(bcm2835_smi_set_regs_from_settings); ++ ++struct smi_settings *bcm2835_smi_get_settings_from_regs ++ (struct bcm2835_smi_instance *inst) ++{ ++ struct smi_settings *settings = &inst->settings; ++ int smidsr, smidsw, smidc; ++ ++ spin_lock(&inst->transaction_lock); ++ ++ smidsr = read_smi_reg(inst, SMIDSR0); ++ smidsw = read_smi_reg(inst, SMIDSW0); ++ smidc = read_smi_reg(inst, SMIDC); ++ ++ settings->pack_data = (read_smi_reg(inst, SMICS) & SMICS_PXLDAT) ? ++ true : false; ++ ++ settings->data_width = GET_BIT_FIELD(smidsr, SMIDSR_RWIDTH); ++ settings->read_setup_time = GET_BIT_FIELD(smidsr, SMIDSR_RSETUP); ++ settings->read_hold_time = GET_BIT_FIELD(smidsr, SMIDSR_RHOLD); ++ settings->read_pace_time = GET_BIT_FIELD(smidsr, SMIDSR_RPACE); ++ settings->read_strobe_time = GET_BIT_FIELD(smidsr, SMIDSR_RSTROBE); ++ ++ settings->write_setup_time = GET_BIT_FIELD(smidsw, SMIDSW_WSETUP); ++ settings->write_hold_time = GET_BIT_FIELD(smidsw, SMIDSW_WHOLD); ++ settings->write_pace_time = GET_BIT_FIELD(smidsw, SMIDSW_WPACE); ++ settings->write_strobe_time = GET_BIT_FIELD(smidsw, SMIDSW_WSTROBE); ++ ++ settings->dma_read_thresh = GET_BIT_FIELD(smidc, SMIDC_REQR); ++ settings->dma_write_thresh = GET_BIT_FIELD(smidc, SMIDC_REQW); ++ settings->dma_panic_read_thresh = GET_BIT_FIELD(smidc, SMIDC_PANICR); ++ settings->dma_panic_write_thresh = GET_BIT_FIELD(smidc, SMIDC_PANICW); ++ settings->dma_passthrough_enable = (smidc & SMIDC_DMAP) ? true : false; ++ settings->dma_enable = (smidc & SMIDC_DMAEN) ? true : false; ++ ++ spin_unlock(&inst->transaction_lock); ++ ++ return settings; ++} ++EXPORT_SYMBOL(bcm2835_smi_get_settings_from_regs); ++ ++static inline void smi_set_address(struct bcm2835_smi_instance *inst, ++ unsigned int address) ++{ ++ int smia_temp = 0, smida_temp = 0; ++ ++ SET_BIT_FIELD(smia_temp, SMIA_ADDR, address); ++ SET_BIT_FIELD(smida_temp, SMIDA_ADDR, address); ++ ++ /* Write to both address registers - user doesn't care whether we're ++ doing programmed or direct transfers. */ ++ write_smi_reg(inst, smia_temp, SMIA); ++ write_smi_reg(inst, smida_temp, SMIDA); ++} ++ ++static void smi_setup_regs(struct bcm2835_smi_instance *inst) ++{ ++ ++ dev_dbg(inst->dev, "Initialising SMI registers..."); ++ /* Disable the peripheral if already enabled */ ++ write_smi_reg(inst, 0, SMICS); ++ write_smi_reg(inst, 0, SMIDCS); ++ ++ smi_get_default_settings(inst); ++ bcm2835_smi_set_regs_from_settings(inst); ++ smi_set_address(inst, 0); ++ ++ write_smi_reg(inst, read_smi_reg(inst, SMICS) | SMICS_ENABLE, SMICS); ++ write_smi_reg(inst, read_smi_reg(inst, SMIDCS) | SMIDCS_ENABLE, ++ SMIDCS); ++} ++ ++/**************************************************************************** ++* ++* Low-level SMI access functions ++* Other modules should use the exported higher-level functions e.g. ++* bcm2835_smi_write_buf() unless they have a good reason to use these ++* ++***************************************************************************/ ++ ++static inline uint32_t smi_read_single_word(struct bcm2835_smi_instance *inst) ++{ ++ int timeout = 0; ++ ++ write_smi_reg(inst, SMIDCS_ENABLE, SMIDCS); ++ write_smi_reg(inst, SMIDCS_ENABLE | SMIDCS_START, SMIDCS); ++ /* Make sure things happen in the right order...*/ ++ mb(); ++ while (!(read_smi_reg(inst, SMIDCS) & SMIDCS_DONE) && ++ ++timeout < 10000) ++ ; ++ if (timeout < 10000) ++ return read_smi_reg(inst, SMIDD); ++ ++ dev_err(inst->dev, ++ "SMI direct read timed out (is the clock set up correctly?)"); ++ return 0; ++} ++ ++static inline void smi_write_single_word(struct bcm2835_smi_instance *inst, ++ uint32_t data) ++{ ++ int timeout = 0; ++ ++ write_smi_reg(inst, SMIDCS_ENABLE | SMIDCS_WRITE, SMIDCS); ++ write_smi_reg(inst, data, SMIDD); ++ write_smi_reg(inst, SMIDCS_ENABLE | SMIDCS_WRITE | SMIDCS_START, ++ SMIDCS); ++ ++ while (!(read_smi_reg(inst, SMIDCS) & SMIDCS_DONE) && ++ ++timeout < 10000) ++ ; ++ if (timeout >= 10000) ++ dev_err(inst->dev, ++ "SMI direct write timed out (is the clock set up correctly?)"); ++} ++ ++/* Initiates a programmed read into the read FIFO. It is up to the caller to ++ * read data from the FIFO - either via paced DMA transfer, ++ * or polling SMICS_RXD to check whether data is available. ++ * SMICS_ACTIVE will go low upon completion. */ ++static void smi_init_programmed_read(struct bcm2835_smi_instance *inst, ++ int num_transfers) ++{ ++ int smics_temp; ++ ++ /* Disable the peripheral: */ ++ smics_temp = read_smi_reg(inst, SMICS) & ~(SMICS_ENABLE | SMICS_WRITE); ++ write_smi_reg(inst, smics_temp, SMICS); ++ while (read_smi_reg(inst, SMICS) & SMICS_ENABLE) ++ ; ++ ++ /* Program the transfer count: */ ++ write_smi_reg(inst, num_transfers, SMIL); ++ ++ /* re-enable and start: */ ++ smics_temp |= SMICS_ENABLE; ++ write_smi_reg(inst, smics_temp, SMICS); ++ smics_temp |= SMICS_CLEAR; ++ /* Just to be certain: */ ++ mb(); ++ while (read_smi_reg(inst, SMICS) & SMICS_ACTIVE) ++ ; ++ write_smi_reg(inst, smics_temp, SMICS); ++ smics_temp |= SMICS_START; ++ write_smi_reg(inst, smics_temp, SMICS); ++} ++ ++/* Initiates a programmed write sequence, using data from the write FIFO. ++ * It is up to the caller to initiate a DMA transfer before calling, ++ * or use another method to keep the write FIFO topped up. ++ * SMICS_ACTIVE will go low upon completion. ++ */ ++static void smi_init_programmed_write(struct bcm2835_smi_instance *inst, ++ int num_transfers) ++{ ++ int smics_temp; ++ ++ /* Disable the peripheral: */ ++ smics_temp = read_smi_reg(inst, SMICS) & ~SMICS_ENABLE; ++ write_smi_reg(inst, smics_temp, SMICS); ++ while (read_smi_reg(inst, SMICS) & SMICS_ENABLE) ++ ; ++ ++ /* Program the transfer count: */ ++ write_smi_reg(inst, num_transfers, SMIL); ++ ++ /* setup, re-enable and start: */ ++ smics_temp |= SMICS_WRITE | SMICS_ENABLE; ++ write_smi_reg(inst, smics_temp, SMICS); ++ smics_temp |= SMICS_START; ++ write_smi_reg(inst, smics_temp, SMICS); ++} ++ ++/* Initiate a read and then poll FIFO for data, reading out as it appears. */ ++static void smi_read_fifo(struct bcm2835_smi_instance *inst, ++ uint32_t *dest, int n_bytes) ++{ ++ if (read_smi_reg(inst, SMICS) & SMICS_RXD) { ++ smi_dump_context_labelled(inst, ++ "WARNING: read FIFO not empty at start of read call."); ++ while (read_smi_reg(inst, SMICS)) ++ ; ++ } ++ ++ /* Dispatch the read: */ ++ if (inst->settings.data_width == SMI_WIDTH_8BIT) ++ smi_init_programmed_read(inst, n_bytes); ++ else if (inst->settings.data_width == SMI_WIDTH_16BIT) ++ smi_init_programmed_read(inst, n_bytes / 2); ++ else { ++ dev_err(inst->dev, "Unsupported data width for read."); ++ return; ++ } ++ ++ /* Poll FIFO to keep it empty */ ++ while (!(read_smi_reg(inst, SMICS) & SMICS_DONE)) ++ if (read_smi_reg(inst, SMICS) & SMICS_RXD) ++ *dest++ = read_smi_reg(inst, SMID); ++ ++ /* Ensure that the FIFO is emptied */ ++ if (read_smi_reg(inst, SMICS) & SMICS_RXD) { ++ int fifo_count; ++ ++ fifo_count = GET_BIT_FIELD(read_smi_reg(inst, SMIFD), ++ SMIFD_FCNT); ++ while (fifo_count--) ++ *dest++ = read_smi_reg(inst, SMID); ++ } ++ ++ if (!(read_smi_reg(inst, SMICS) & SMICS_DONE)) ++ smi_dump_context_labelled(inst, ++ "WARNING: transaction finished but done bit not set."); ++ ++ if (read_smi_reg(inst, SMICS) & SMICS_RXD) ++ smi_dump_context_labelled(inst, ++ "WARNING: read FIFO not empty at end of read call."); ++ ++} ++ ++/* Initiate a write, and then keep the FIFO topped up. */ ++static void smi_write_fifo(struct bcm2835_smi_instance *inst, ++ uint32_t *src, int n_bytes) ++{ ++ int i, timeout = 0; ++ ++ /* Empty FIFOs if not already so */ ++ if (!(read_smi_reg(inst, SMICS) & SMICS_TXE)) { ++ smi_dump_context_labelled(inst, ++ "WARNING: write fifo not empty at start of write call."); ++ write_smi_reg(inst, read_smi_reg(inst, SMICS) | SMICS_CLEAR, ++ SMICS); ++ } ++ ++ /* Initiate the transfer */ ++ if (inst->settings.data_width == SMI_WIDTH_8BIT) ++ smi_init_programmed_write(inst, n_bytes); ++ else if (inst->settings.data_width == SMI_WIDTH_16BIT) ++ smi_init_programmed_write(inst, n_bytes / 2); ++ else { ++ dev_err(inst->dev, "Unsupported data width for write."); ++ return; ++ } ++ /* Fill the FIFO: */ ++ for (i = 0; i < (n_bytes - 1) / 4 + 1; ++i) { ++ while (!(read_smi_reg(inst, SMICS) & SMICS_TXD)) ++ ; ++ write_smi_reg(inst, *src++, SMID); ++ } ++ /* Busy wait... */ ++ while (!(read_smi_reg(inst, SMICS) & SMICS_DONE) && ++timeout < ++ 1000000) ++ ; ++ if (timeout >= 1000000) ++ smi_dump_context_labelled(inst, ++ "Timed out on write operation!"); ++ if (!(read_smi_reg(inst, SMICS) & SMICS_TXE)) ++ smi_dump_context_labelled(inst, ++ "WARNING: FIFO not empty at end of write operation."); ++} ++ ++/**************************************************************************** ++* ++* SMI DMA operations ++* ++***************************************************************************/ ++ ++/* Disable SMI and put it into the correct direction before doing DMA setup. ++ Stops spurious DREQs during setup. Peripheral is re-enabled by init_*() */ ++static void smi_disable(struct bcm2835_smi_instance *inst, ++ enum dma_transfer_direction direction) ++{ ++ int smics_temp = read_smi_reg(inst, SMICS) & ~SMICS_ENABLE; ++ ++ if (direction == DMA_DEV_TO_MEM) ++ smics_temp &= ~SMICS_WRITE; ++ else ++ smics_temp |= SMICS_WRITE; ++ write_smi_reg(inst, smics_temp, SMICS); ++ while (read_smi_reg(inst, SMICS) & SMICS_ACTIVE) ++ ; ++} ++ ++static struct scatterlist *smi_scatterlist_from_buffer( ++ struct bcm2835_smi_instance *inst, ++ dma_addr_t buf, ++ size_t len, ++ struct scatterlist *sg) ++{ ++ sg_init_table(sg, 1); ++ sg_dma_address(sg) = buf; ++ sg_dma_len(sg) = len; ++ return sg; ++} ++ ++static void smi_dma_callback_user_copy(void *param) ++{ ++ /* Notify the bottom half that a chunk is ready for user copy */ ++ struct bcm2835_smi_instance *inst = ++ (struct bcm2835_smi_instance *)param; ++ ++ up(&inst->bounce.callback_sem); ++} ++ ++/* Creates a descriptor, assigns the given callback, and submits the ++ descriptor to dmaengine. Does not block - can queue up multiple ++ descriptors and then wait for them all to complete. ++ sg_len is the number of control blocks, NOT the number of bytes. ++ dir can be DMA_MEM_TO_DEV or DMA_DEV_TO_MEM. ++ callback can be NULL - in this case it is not called. */ ++static inline struct dma_async_tx_descriptor *smi_dma_submit_sgl( ++ struct bcm2835_smi_instance *inst, ++ struct scatterlist *sgl, ++ size_t sg_len, ++ enum dma_transfer_direction dir, ++ dma_async_tx_callback callback) ++{ ++ struct dma_async_tx_descriptor *desc; ++ ++ desc = dmaengine_prep_slave_sg(inst->dma_chan, ++ sgl, ++ sg_len, ++ dir, ++ DMA_PREP_INTERRUPT | DMA_CTRL_ACK | ++ DMA_PREP_FENCE); ++ if (!desc) { ++ dev_err(inst->dev, "read_sgl: dma slave preparation failed!"); ++ write_smi_reg(inst, read_smi_reg(inst, SMICS) & ~SMICS_ACTIVE, ++ SMICS); ++ while (read_smi_reg(inst, SMICS) & SMICS_ACTIVE) ++ cpu_relax(); ++ write_smi_reg(inst, read_smi_reg(inst, SMICS) | SMICS_ACTIVE, ++ SMICS); ++ return NULL; ++ } ++ desc->callback = callback; ++ desc->callback_param = inst; ++ if (dmaengine_submit(desc) < 0) ++ return NULL; ++ return desc; ++} ++ ++/* NB this function blocks until the transfer is complete */ ++static void ++smi_dma_read_sgl(struct bcm2835_smi_instance *inst, ++ struct scatterlist *sgl, size_t sg_len, size_t n_bytes) ++{ ++ struct dma_async_tx_descriptor *desc; ++ ++ /* Disable SMI and set to read before dispatching DMA - if SMI is in ++ * write mode and TX fifo is empty, it will generate a DREQ which may ++ * cause the read DMA to complete before the SMI read command is even ++ * dispatched! We want to dispatch DMA before SMI read so that reading ++ * is gapless, for logic analyser. ++ */ ++ ++ smi_disable(inst, DMA_DEV_TO_MEM); ++ ++ desc = smi_dma_submit_sgl(inst, sgl, sg_len, DMA_DEV_TO_MEM, NULL); ++ dma_async_issue_pending(inst->dma_chan); ++ ++ if (inst->settings.data_width == SMI_WIDTH_8BIT) ++ smi_init_programmed_read(inst, n_bytes); ++ else ++ smi_init_programmed_read(inst, n_bytes / 2); ++ ++ if (dma_wait_for_async_tx(desc) == DMA_ERROR) ++ smi_dump_context_labelled(inst, "DMA timeout!"); ++} ++ ++static void ++smi_dma_write_sgl(struct bcm2835_smi_instance *inst, ++ struct scatterlist *sgl, size_t sg_len, size_t n_bytes) ++{ ++ struct dma_async_tx_descriptor *desc; ++ ++ if (inst->settings.data_width == SMI_WIDTH_8BIT) ++ smi_init_programmed_write(inst, n_bytes); ++ else ++ smi_init_programmed_write(inst, n_bytes / 2); ++ ++ desc = smi_dma_submit_sgl(inst, sgl, sg_len, DMA_MEM_TO_DEV, NULL); ++ dma_async_issue_pending(inst->dma_chan); ++ ++ if (dma_wait_for_async_tx(desc) == DMA_ERROR) ++ smi_dump_context_labelled(inst, "DMA timeout!"); ++ else ++ /* Wait for SMI to finish our writes */ ++ while (!(read_smi_reg(inst, SMICS) & SMICS_DONE)) ++ cpu_relax(); ++} ++ ++ssize_t bcm2835_smi_user_dma( ++ struct bcm2835_smi_instance *inst, ++ enum dma_transfer_direction dma_dir, ++ char __user *user_ptr, size_t count, ++ struct bcm2835_smi_bounce_info **bounce) ++{ ++ int chunk_no = 0, chunk_size, count_left = count; ++ struct scatterlist *sgl; ++ void (*init_trans_func)(struct bcm2835_smi_instance *, int); ++ ++ spin_lock(&inst->transaction_lock); ++ ++ if (dma_dir == DMA_DEV_TO_MEM) ++ init_trans_func = smi_init_programmed_read; ++ else ++ init_trans_func = smi_init_programmed_write; ++ ++ smi_disable(inst, dma_dir); ++ ++ sema_init(&inst->bounce.callback_sem, 0); ++ if (bounce) ++ *bounce = &inst->bounce; ++ while (count_left) { ++ chunk_size = count_left > DMA_BOUNCE_BUFFER_SIZE ? ++ DMA_BOUNCE_BUFFER_SIZE : count_left; ++ if (chunk_size == DMA_BOUNCE_BUFFER_SIZE) { ++ sgl = ++ &inst->bounce.sgl[chunk_no % DMA_BOUNCE_BUFFER_COUNT]; ++ } else { ++ sgl = smi_scatterlist_from_buffer( ++ inst, ++ inst->bounce.phys[ ++ chunk_no % DMA_BOUNCE_BUFFER_COUNT], ++ chunk_size, ++ &inst->buffer_sgl); ++ } ++ ++ if (!smi_dma_submit_sgl(inst, sgl, 1, dma_dir, ++ smi_dma_callback_user_copy ++ )) { ++ dev_err(inst->dev, "sgl submit failed"); ++ count = 0; ++ goto out; ++ } ++ count_left -= chunk_size; ++ chunk_no++; ++ } ++ dma_async_issue_pending(inst->dma_chan); ++ ++ if (inst->settings.data_width == SMI_WIDTH_8BIT) ++ init_trans_func(inst, count); ++ else if (inst->settings.data_width == SMI_WIDTH_16BIT) ++ init_trans_func(inst, count / 2); ++out: ++ spin_unlock(&inst->transaction_lock); ++ return count; ++} ++EXPORT_SYMBOL(bcm2835_smi_user_dma); ++ ++ ++/**************************************************************************** ++* ++* High level buffer transfer functions - for use by other drivers ++* ++***************************************************************************/ ++ ++/* Buffer must be physically contiguous - i.e. kmalloc, not vmalloc! */ ++void bcm2835_smi_write_buf( ++ struct bcm2835_smi_instance *inst, ++ const void *buf, size_t n_bytes) ++{ ++ int odd_bytes = n_bytes & 0x3; ++ ++ n_bytes -= odd_bytes; ++ ++ spin_lock(&inst->transaction_lock); ++ ++ if (n_bytes > DMA_THRESHOLD_BYTES) { ++ dma_addr_t phy_addr = dma_map_single( ++ inst->dev, ++ (void *)buf, ++ n_bytes, ++ DMA_MEM_TO_DEV); ++ struct scatterlist *sgl = ++ smi_scatterlist_from_buffer(inst, phy_addr, n_bytes, ++ &inst->buffer_sgl); ++ ++ if (!sgl) { ++ smi_dump_context_labelled(inst, ++ "Error: could not create scatterlist for write!"); ++ goto out; ++ } ++ smi_dma_write_sgl(inst, sgl, 1, n_bytes); ++ ++ dma_unmap_single ++ (inst->dev, phy_addr, n_bytes, DMA_MEM_TO_DEV); ++ } else if (n_bytes) { ++ smi_write_fifo(inst, (uint32_t *) buf, n_bytes); ++ } ++ buf += n_bytes; ++ ++ if (inst->settings.data_width == SMI_WIDTH_8BIT) { ++ while (odd_bytes--) ++ smi_write_single_word(inst, *(uint8_t *) (buf++)); ++ } else { ++ while (odd_bytes >= 2) { ++ smi_write_single_word(inst, *(uint16_t *)buf); ++ buf += 2; ++ odd_bytes -= 2; ++ } ++ if (odd_bytes) { ++ /* Reading an odd number of bytes on a 16 bit bus is ++ a user bug. It's kinder to fail early and tell them ++ than to e.g. transparently give them the bottom byte ++ of a 16 bit transfer. */ ++ dev_err(inst->dev, ++ "WARNING: odd number of bytes specified for wide transfer."); ++ dev_err(inst->dev, ++ "At least one byte dropped as a result."); ++ dump_stack(); ++ } ++ } ++out: ++ spin_unlock(&inst->transaction_lock); ++} ++EXPORT_SYMBOL(bcm2835_smi_write_buf); ++ ++void bcm2835_smi_read_buf(struct bcm2835_smi_instance *inst, ++ void *buf, size_t n_bytes) ++{ ++ ++ /* SMI is inherently 32-bit, which causes surprising amounts of mess ++ for bytes % 4 != 0. Easiest to avoid this mess altogether ++ by handling remainder separately. */ ++ int odd_bytes = n_bytes & 0x3; ++ ++ spin_lock(&inst->transaction_lock); ++ n_bytes -= odd_bytes; ++ if (n_bytes > DMA_THRESHOLD_BYTES) { ++ dma_addr_t phy_addr = dma_map_single(inst->dev, ++ buf, n_bytes, ++ DMA_DEV_TO_MEM); ++ struct scatterlist *sgl = smi_scatterlist_from_buffer( ++ inst, phy_addr, n_bytes, ++ &inst->buffer_sgl); ++ if (!sgl) { ++ smi_dump_context_labelled(inst, ++ "Error: could not create scatterlist for read!"); ++ goto out; ++ } ++ smi_dma_read_sgl(inst, sgl, 1, n_bytes); ++ dma_unmap_single(inst->dev, phy_addr, n_bytes, DMA_DEV_TO_MEM); ++ } else if (n_bytes) { ++ smi_read_fifo(inst, (uint32_t *)buf, n_bytes); ++ } ++ buf += n_bytes; ++ ++ if (inst->settings.data_width == SMI_WIDTH_8BIT) { ++ while (odd_bytes--) ++ *((uint8_t *) (buf++)) = smi_read_single_word(inst); ++ } else { ++ while (odd_bytes >= 2) { ++ *(uint16_t *) buf = smi_read_single_word(inst); ++ buf += 2; ++ odd_bytes -= 2; ++ } ++ if (odd_bytes) { ++ dev_err(inst->dev, ++ "WARNING: odd number of bytes specified for wide transfer."); ++ dev_err(inst->dev, ++ "At least one byte dropped as a result."); ++ dump_stack(); ++ } ++ } ++out: ++ spin_unlock(&inst->transaction_lock); ++} ++EXPORT_SYMBOL(bcm2835_smi_read_buf); ++ ++void bcm2835_smi_set_address(struct bcm2835_smi_instance *inst, ++ unsigned int address) ++{ ++ spin_lock(&inst->transaction_lock); ++ smi_set_address(inst, address); ++ spin_unlock(&inst->transaction_lock); ++} ++EXPORT_SYMBOL(bcm2835_smi_set_address); ++ ++struct bcm2835_smi_instance *bcm2835_smi_get(struct device_node *node) ++{ ++ struct platform_device *pdev; ++ ++ if (!node) ++ return NULL; ++ ++ pdev = of_find_device_by_node(node); ++ if (!pdev) ++ return NULL; ++ ++ return platform_get_drvdata(pdev); ++} ++EXPORT_SYMBOL(bcm2835_smi_get); ++ ++/**************************************************************************** ++* ++* bcm2835_smi_probe - called when the driver is loaded. ++* ++***************************************************************************/ ++ ++static int bcm2835_smi_dma_setup(struct bcm2835_smi_instance *inst) ++{ ++ int i, rv = 0; ++ ++ inst->dma_chan = dma_request_slave_channel(inst->dev, "rx-tx"); ++ ++ inst->dma_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ inst->dma_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ inst->dma_config.src_addr = inst->smi_regs_busaddr + SMID; ++ inst->dma_config.dst_addr = inst->dma_config.src_addr; ++ /* Direction unimportant - always overridden by prep_slave_sg */ ++ inst->dma_config.direction = DMA_DEV_TO_MEM; ++ dmaengine_slave_config(inst->dma_chan, &inst->dma_config); ++ /* Alloc and map bounce buffers */ ++ for (i = 0; i < DMA_BOUNCE_BUFFER_COUNT; ++i) { ++ inst->bounce.buffer[i] = ++ dmam_alloc_coherent(inst->dev, DMA_BOUNCE_BUFFER_SIZE, ++ &inst->bounce.phys[i], ++ GFP_KERNEL); ++ if (!inst->bounce.buffer[i]) { ++ dev_err(inst->dev, "Could not allocate buffer!"); ++ rv = -ENOMEM; ++ break; ++ } ++ smi_scatterlist_from_buffer( ++ inst, ++ inst->bounce.phys[i], ++ DMA_BOUNCE_BUFFER_SIZE, ++ &inst->bounce.sgl[i] ++ ); ++ } ++ ++ return rv; ++} ++ ++static int bcm2835_smi_probe(struct platform_device *pdev) ++{ ++ int err; ++ struct device *dev = &pdev->dev; ++ struct device_node *node = dev->of_node; ++ struct resource *ioresource; ++ struct bcm2835_smi_instance *inst; ++ ++ /* Allocate buffers and instance data */ ++ ++ inst = devm_kzalloc(dev, sizeof(struct bcm2835_smi_instance), ++ GFP_KERNEL); ++ ++ if (!inst) ++ return -ENOMEM; ++ ++ inst->dev = dev; ++ spin_lock_init(&inst->transaction_lock); ++ ++ /* We require device tree support */ ++ if (!node) ++ return -EINVAL; ++ ++ ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ inst->smi_regs_ptr = devm_ioremap_resource(dev, ioresource); ++ ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 1); ++ inst->cm_smi_regs_ptr = devm_ioremap_resource(dev, ioresource); ++ inst->smi_regs_busaddr = be32_to_cpu( ++ *of_get_address(node, 0, NULL, NULL)); ++ of_property_read_u32(node, ++ "brcm,smi-clock-source", ++ &inst->clock_source); ++ of_property_read_u32(node, ++ "brcm,smi-clock-divisor", ++ &inst->clock_divisor); ++ ++ err = bcm2835_smi_dma_setup(inst); ++ if (err) ++ return err; ++ ++ /* Finally, do peripheral setup */ ++ ++ smi_setup_clock(inst); ++ smi_setup_regs(inst); ++ ++ platform_set_drvdata(pdev, inst); ++ ++ dev_info(inst->dev, "initialised"); ++ ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* bcm2835_smi_remove - called when the driver is unloaded. ++* ++***************************************************************************/ ++ ++static int bcm2835_smi_remove(struct platform_device *pdev) ++{ ++ struct bcm2835_smi_instance *inst = platform_get_drvdata(pdev); ++ struct device *dev = inst->dev; ++ ++ dev_info(dev, "SMI device removed - OK"); ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* Register the driver with device tree ++* ++***************************************************************************/ ++ ++static const struct of_device_id bcm2835_smi_of_match[] = { ++ {.compatible = "brcm,bcm2835-smi",}, ++ { /* sentinel */ }, ++}; ++ ++MODULE_DEVICE_TABLE(of, bcm2835_smi_of_match); ++ ++static struct platform_driver bcm2835_smi_driver = { ++ .probe = bcm2835_smi_probe, ++ .remove = bcm2835_smi_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2835_smi_of_match, ++ }, ++}; ++ ++module_platform_driver(bcm2835_smi_driver); ++ ++MODULE_ALIAS("platform:smi-bcm2835"); ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("Device driver for BCM2835's secondary memory interface"); ++MODULE_AUTHOR("Luke Wren "); +--- /dev/null ++++ b/include/linux/broadcom/bcm2835_smi.h +@@ -0,0 +1,391 @@ ++/** ++ * Declarations and definitions for Broadcom's Secondary Memory Interface ++ * ++ * Written by Luke Wren ++ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd. ++ * Copyright (c) 2010-2012 Broadcom. All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") version 2, as published by the Free ++ * Software Foundation. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#ifndef BCM2835_SMI_H ++#define BCM2835_SMI_H ++ ++#include ++ ++#ifndef __KERNEL__ ++#include ++#include ++#endif ++ ++#define BCM2835_SMI_IOC_MAGIC 0x1 ++#define BCM2835_SMI_INVALID_HANDLE (~0) ++ ++/* IOCTLs 0x100...0x1ff are not device-specific - we can use them */ ++#define BCM2835_SMI_IOC_GET_SETTINGS _IO(BCM2835_SMI_IOC_MAGIC, 0) ++#define BCM2835_SMI_IOC_WRITE_SETTINGS _IO(BCM2835_SMI_IOC_MAGIC, 1) ++#define BCM2835_SMI_IOC_ADDRESS _IO(BCM2835_SMI_IOC_MAGIC, 2) ++#define BCM2835_SMI_IOC_MAX 2 ++ ++#define SMI_WIDTH_8BIT 0 ++#define SMI_WIDTH_16BIT 1 ++#define SMI_WIDTH_9BIT 2 ++#define SMI_WIDTH_18BIT 3 ++ ++/* max number of bytes where DMA will not be used */ ++#define DMA_THRESHOLD_BYTES 128 ++#define DMA_BOUNCE_BUFFER_SIZE (1024 * 1024 / 2) ++#define DMA_BOUNCE_BUFFER_COUNT 3 ++ ++ ++struct smi_settings { ++ int data_width; ++ /* Whether or not to pack multiple SMI transfers into a ++ single 32 bit FIFO word */ ++ bool pack_data; ++ ++ /* Timing for reads (writes the same but for WE) ++ * ++ * OE ----------+ +-------------------- ++ * | | ++ * +----------+ ++ * SD -<==============================>----------- ++ * SA -<=========================================>- ++ * <-setup-> <-strobe -> <-hold -> <- pace -> ++ */ ++ ++ int read_setup_time; ++ int read_hold_time; ++ int read_pace_time; ++ int read_strobe_time; ++ ++ int write_setup_time; ++ int write_hold_time; ++ int write_pace_time; ++ int write_strobe_time; ++ ++ bool dma_enable; /* DREQs */ ++ bool dma_passthrough_enable; /* External DREQs */ ++ int dma_read_thresh; ++ int dma_write_thresh; ++ int dma_panic_read_thresh; ++ int dma_panic_write_thresh; ++}; ++ ++/**************************************************************************** ++* ++* Declare exported SMI functions ++* ++***************************************************************************/ ++ ++#ifdef __KERNEL__ ++ ++#include /* for enum dma_transfer_direction */ ++#include ++#include ++ ++struct bcm2835_smi_instance; ++ ++struct bcm2835_smi_bounce_info { ++ struct semaphore callback_sem; ++ void *buffer[DMA_BOUNCE_BUFFER_COUNT]; ++ dma_addr_t phys[DMA_BOUNCE_BUFFER_COUNT]; ++ struct scatterlist sgl[DMA_BOUNCE_BUFFER_COUNT]; ++}; ++ ++ ++void bcm2835_smi_set_regs_from_settings(struct bcm2835_smi_instance *); ++ ++struct smi_settings *bcm2835_smi_get_settings_from_regs( ++ struct bcm2835_smi_instance *inst); ++ ++void bcm2835_smi_write_buf( ++ struct bcm2835_smi_instance *inst, ++ const void *buf, ++ size_t n_bytes); ++ ++void bcm2835_smi_read_buf( ++ struct bcm2835_smi_instance *inst, ++ void *buf, ++ size_t n_bytes); ++ ++void bcm2835_smi_set_address(struct bcm2835_smi_instance *inst, ++ unsigned int address); ++ ++ssize_t bcm2835_smi_user_dma( ++ struct bcm2835_smi_instance *inst, ++ enum dma_transfer_direction dma_dir, ++ char __user *user_ptr, ++ size_t count, ++ struct bcm2835_smi_bounce_info **bounce); ++ ++struct bcm2835_smi_instance *bcm2835_smi_get(struct device_node *node); ++ ++#endif /* __KERNEL__ */ ++ ++/**************************************************************** ++* ++* Implementation-only declarations ++* ++****************************************************************/ ++ ++#ifdef BCM2835_SMI_IMPLEMENTATION ++ ++/* Clock manager registers for SMI clock: */ ++#define CM_SMI_BASE_ADDRESS ((BCM2708_PERI_BASE) + 0x1010b0) ++/* Clock manager "password" to protect registers from spurious writes */ ++#define CM_PWD (0x5a << 24) ++ ++#define CM_SMI_CTL 0x00 ++#define CM_SMI_DIV 0x04 ++ ++#define CM_SMI_CTL_FLIP (1 << 8) ++#define CM_SMI_CTL_BUSY (1 << 7) ++#define CM_SMI_CTL_KILL (1 << 5) ++#define CM_SMI_CTL_ENAB (1 << 4) ++#define CM_SMI_CTL_SRC_MASK (0xf) ++#define CM_SMI_CTL_SRC_OFFS (0) ++ ++#define CM_SMI_DIV_DIVI_MASK (0xf << 12) ++#define CM_SMI_DIV_DIVI_OFFS (12) ++#define CM_SMI_DIV_DIVF_MASK (0xff << 4) ++#define CM_SMI_DIV_DIVF_OFFS (4) ++ ++/* SMI register mapping:*/ ++#define SMI_BASE_ADDRESS ((BCM2708_PERI_BASE) + 0x600000) ++ ++#define SMICS 0x00 /* control + status register */ ++#define SMIL 0x04 /* length/count (n external txfers) */ ++#define SMIA 0x08 /* address register */ ++#define SMID 0x0c /* data register */ ++#define SMIDSR0 0x10 /* device 0 read settings */ ++#define SMIDSW0 0x14 /* device 0 write settings */ ++#define SMIDSR1 0x18 /* device 1 read settings */ ++#define SMIDSW1 0x1c /* device 1 write settings */ ++#define SMIDSR2 0x20 /* device 2 read settings */ ++#define SMIDSW2 0x24 /* device 2 write settings */ ++#define SMIDSR3 0x28 /* device 3 read settings */ ++#define SMIDSW3 0x2c /* device 3 write settings */ ++#define SMIDC 0x30 /* DMA control registers */ ++#define SMIDCS 0x34 /* direct control/status register */ ++#define SMIDA 0x38 /* direct address register */ ++#define SMIDD 0x3c /* direct data registers */ ++#define SMIFD 0x40 /* FIFO debug register */ ++ ++ ++ ++/* Control and Status register bits: ++ * SMICS_RXF : RX fifo full: 1 when RX fifo is full ++ * SMICS_TXE : TX fifo empty: 1 when empty. ++ * SMICS_RXD : RX fifo contains data: 1 when there is data. ++ * SMICS_TXD : TX fifo can accept data: 1 when true. ++ * SMICS_RXR : RX fifo needs reading: 1 when fifo more than 3/4 full, or ++ * when "DONE" and fifo not emptied. ++ * SMICS_TXW : TX fifo needs writing: 1 when less than 1/4 full. ++ * SMICS_AFERR : AXI FIFO error: 1 when fifo read when empty or written ++ * when full. Write 1 to clear. ++ * SMICS_EDREQ : 1 when external DREQ received. ++ * SMICS_PXLDAT : Pixel data: write 1 to enable pixel transfer modes. ++ * SMICS_SETERR : 1 if there was an error writing to setup regs (e.g. ++ * tx was in progress). Write 1 to clear. ++ * SMICS_PVMODE : Set to 1 to enable pixel valve mode. ++ * SMICS_INTR : Set to 1 to enable interrupt on RX. ++ * SMICS_INTT : Set to 1 to enable interrupt on TX. ++ * SMICS_INTD : Set to 1 to enable interrupt on DONE condition. ++ * SMICS_TEEN : Tear effect mode enabled: Programmed transfers will wait ++ * for a TE trigger before writing. ++ * SMICS_PAD1 : Padding settings for external transfers. For writes: the ++ * number of bytes initially written to the TX fifo that ++ * SMICS_PAD0 : should be ignored. For reads: the number of bytes that will ++ * be read before the data, and should be dropped. ++ * SMICS_WRITE : Transfer direction: 1 = write to external device, 0 = read ++ * SMICS_CLEAR : Write 1 to clear the FIFOs. ++ * SMICS_START : Write 1 to start the programmed transfer. ++ * SMICS_ACTIVE : Reads as 1 when a programmed transfer is underway. ++ * SMICS_DONE : Reads as 1 when transfer finished. For RX, not set until ++ * FIFO emptied. ++ * SMICS_ENABLE : Set to 1 to enable the SMI peripheral, 0 to disable. ++ */ ++ ++#define SMICS_RXF (1 << 31) ++#define SMICS_TXE (1 << 30) ++#define SMICS_RXD (1 << 29) ++#define SMICS_TXD (1 << 28) ++#define SMICS_RXR (1 << 27) ++#define SMICS_TXW (1 << 26) ++#define SMICS_AFERR (1 << 25) ++#define SMICS_EDREQ (1 << 15) ++#define SMICS_PXLDAT (1 << 14) ++#define SMICS_SETERR (1 << 13) ++#define SMICS_PVMODE (1 << 12) ++#define SMICS_INTR (1 << 11) ++#define SMICS_INTT (1 << 10) ++#define SMICS_INTD (1 << 9) ++#define SMICS_TEEN (1 << 8) ++#define SMICS_PAD1 (1 << 7) ++#define SMICS_PAD0 (1 << 6) ++#define SMICS_WRITE (1 << 5) ++#define SMICS_CLEAR (1 << 4) ++#define SMICS_START (1 << 3) ++#define SMICS_ACTIVE (1 << 2) ++#define SMICS_DONE (1 << 1) ++#define SMICS_ENABLE (1 << 0) ++ ++/* Address register bits: */ ++ ++#define SMIA_DEVICE_MASK ((1 << 9) | (1 << 8)) ++#define SMIA_DEVICE_OFFS (8) ++#define SMIA_ADDR_MASK (0x3f) /* bits 5 -> 0 */ ++#define SMIA_ADDR_OFFS (0) ++ ++/* DMA control register bits: ++ * SMIDC_DMAEN : DMA enable: set 1: DMA requests will be issued. ++ * SMIDC_DMAP : DMA passthrough: when set to 0, top two data pins are used by ++ * SMI as usual. When set to 1, the top two pins are used for ++ * external DREQs: pin 16 read request, 17 write. ++ * SMIDC_PANIC* : Threshold at which DMA will panic during read/write. ++ * SMIDC_REQ* : Threshold at which DMA will generate a DREQ. ++ */ ++ ++#define SMIDC_DMAEN (1 << 28) ++#define SMIDC_DMAP (1 << 24) ++#define SMIDC_PANICR_MASK (0x3f << 18) ++#define SMIDC_PANICR_OFFS (18) ++#define SMIDC_PANICW_MASK (0x3f << 12) ++#define SMIDC_PANICW_OFFS (12) ++#define SMIDC_REQR_MASK (0x3f << 6) ++#define SMIDC_REQR_OFFS (6) ++#define SMIDC_REQW_MASK (0x3f) ++#define SMIDC_REQW_OFFS (0) ++ ++/* Device settings register bits: same for all 4 (or 3?) device register sets. ++ * Device read settings: ++ * SMIDSR_RWIDTH : Read transfer width. 00 = 8bit, 01 = 16bit, ++ * 10 = 18bit, 11 = 9bit. ++ * SMIDSR_RSETUP : Read setup time: number of core cycles between chip ++ * select/address and read strobe. Min 1, max 64. ++ * SMIDSR_MODE68 : 1 for System 68 mode (i.e. enable + direction pins, ++ * rather than OE + WE pin) ++ * SMIDSR_FSETUP : If set to 1, setup time only applies to first ++ * transfer after address change. ++ * SMIDSR_RHOLD : Number of core cycles between read strobe going ++ * inactive and CS/address going inactive. Min 1, max 64 ++ * SMIDSR_RPACEALL : When set to 1, this device's RPACE value will always ++ * be used for the next transaction, even if it is not ++ * to this device. ++ * SMIDSR_RPACE : Number of core cycles spent waiting between CS ++ * deassert and start of next transfer. Min 1, max 128 ++ * SMIDSR_RDREQ : 1 = use external DMA request on SD16 to pace reads ++ * from device. Must also set DMAP in SMICS. ++ * SMIDSR_RSTROBE : Number of cycles to assert the read strobe. ++ * min 1, max 128. ++ */ ++#define SMIDSR_RWIDTH_MASK ((1<<31)|(1<<30)) ++#define SMIDSR_RWIDTH_OFFS (30) ++#define SMIDSR_RSETUP_MASK (0x3f << 24) ++#define SMIDSR_RSETUP_OFFS (24) ++#define SMIDSR_MODE68 (1 << 23) ++#define SMIDSR_FSETUP (1 << 22) ++#define SMIDSR_RHOLD_MASK (0x3f << 16) ++#define SMIDSR_RHOLD_OFFS (16) ++#define SMIDSR_RPACEALL (1 << 15) ++#define SMIDSR_RPACE_MASK (0x7f << 8) ++#define SMIDSR_RPACE_OFFS (8) ++#define SMIDSR_RDREQ (1 << 7) ++#define SMIDSR_RSTROBE_MASK (0x7f) ++#define SMIDSR_RSTROBE_OFFS (0) ++ ++/* Device write settings: ++ * SMIDSW_WWIDTH : Write transfer width. 00 = 8bit, 01 = 16bit, ++ * 10= 18bit, 11 = 9bit. ++ * SMIDSW_WSETUP : Number of cycles between CS assert and write strobe. ++ * Min 1, max 64. ++ * SMIDSW_WFORMAT : Pixel format of input. 0 = 16bit RGB 565, ++ * 1 = 32bit RGBA 8888 ++ * SMIDSW_WSWAP : 1 = swap pixel data bits. (Use with SMICS_PXLDAT) ++ * SMIDSW_WHOLD : Time between WE deassert and CS deassert. 1 to 64 ++ * SMIDSW_WPACEALL : 1: this device's WPACE will be used for the next ++ * transfer, regardless of that transfer's device. ++ * SMIDSW_WPACE : Cycles between CS deassert and next CS assert. ++ * Min 1, max 128 ++ * SMIDSW_WDREQ : Use external DREQ on pin 17 to pace writes. DMAP must ++ * be set in SMICS. ++ * SMIDSW_WSTROBE : Number of cycles to assert the write strobe. ++ * Min 1, max 128 ++ */ ++#define SMIDSW_WWIDTH_MASK ((1<<31)|(1<<30)) ++#define SMIDSW_WWIDTH_OFFS (30) ++#define SMIDSW_WSETUP_MASK (0x3f << 24) ++#define SMIDSW_WSETUP_OFFS (24) ++#define SMIDSW_WFORMAT (1 << 23) ++#define SMIDSW_WSWAP (1 << 22) ++#define SMIDSW_WHOLD_MASK (0x3f << 16) ++#define SMIDSW_WHOLD_OFFS (16) ++#define SMIDSW_WPACEALL (1 << 15) ++#define SMIDSW_WPACE_MASK (0x7f << 8) ++#define SMIDSW_WPACE_OFFS (8) ++#define SMIDSW_WDREQ (1 << 7) ++#define SMIDSW_WSTROBE_MASK (0x7f) ++#define SMIDSW_WSTROBE_OFFS (0) ++ ++/* Direct transfer control + status register ++ * SMIDCS_WRITE : Direction of transfer: 1 -> write, 0 -> read ++ * SMIDCS_DONE : 1 when a transfer has finished. Write 1 to clear. ++ * SMIDCS_START : Write 1 to start a transfer, if one is not already underway. ++ * SMIDCE_ENABLE: Write 1 to enable SMI in direct mode. ++ */ ++ ++#define SMIDCS_WRITE (1 << 3) ++#define SMIDCS_DONE (1 << 2) ++#define SMIDCS_START (1 << 1) ++#define SMIDCS_ENABLE (1 << 0) ++ ++/* Direct transfer address register ++ * SMIDA_DEVICE : Indicates which of the device settings banks should be used. ++ * SMIDA_ADDR : The value to be asserted on the address pins. ++ */ ++ ++#define SMIDA_DEVICE_MASK ((1<<9)|(1<<8)) ++#define SMIDA_DEVICE_OFFS (8) ++#define SMIDA_ADDR_MASK (0x3f) ++#define SMIDA_ADDR_OFFS (0) ++ ++/* FIFO debug register ++ * SMIFD_FLVL : The high-tide mark of FIFO count during the most recent txfer ++ * SMIFD_FCNT : The current FIFO count. ++ */ ++#define SMIFD_FLVL_MASK (0x3f << 8) ++#define SMIFD_FLVL_OFFS (8) ++#define SMIFD_FCNT_MASK (0x3f) ++#define SMIFD_FCNT_OFFS (0) ++ ++#endif /* BCM2835_SMI_IMPLEMENTATION */ ++ ++#endif /* BCM2835_SMI_H */ diff --git a/target/linux/brcm2708/patches-4.9/950-0043-MISC-bcm2835-smi-use-clock-manager-and-fix-reload-is.patch b/target/linux/brcm2708/patches-4.9/950-0043-MISC-bcm2835-smi-use-clock-manager-and-fix-reload-is.patch new file mode 100644 index 000000000000..69f68c79eda7 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0043-MISC-bcm2835-smi-use-clock-manager-and-fix-reload-is.patch @@ -0,0 +1,169 @@ +From 6bc6d433aaed4d4a5d5be44e70d9de865a850048 Mon Sep 17 00:00:00 2001 +From: Martin Sperl +Date: Tue, 26 Apr 2016 14:59:21 +0000 +Subject: [PATCH] MISC: bcm2835: smi: use clock manager and fix reload issues + +Use clock manager instead of self-made clockmanager. + +Also fix some error paths that showd up during development +(especially missing release of dma resources on rmmod) + +Signed-off-by: Martin Sperl +--- + drivers/misc/bcm2835_smi.c | 86 +++++++++++++++------------------------------- + 1 file changed, 28 insertions(+), 58 deletions(-) + +--- a/drivers/misc/bcm2835_smi.c ++++ b/drivers/misc/bcm2835_smi.c +@@ -34,6 +34,7 @@ + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + ++#include + #include + #include + #include +@@ -62,7 +63,7 @@ + struct bcm2835_smi_instance { + struct device *dev; + struct smi_settings settings; +- __iomem void *smi_regs_ptr, *cm_smi_regs_ptr; ++ __iomem void *smi_regs_ptr; + dma_addr_t smi_regs_busaddr; + + struct dma_chan *dma_chan; +@@ -72,8 +73,7 @@ struct bcm2835_smi_instance { + + struct scatterlist buffer_sgl; + +- int clock_source; +- int clock_divisor; ++ struct clk *clk; + + /* Sometimes we are called into in an atomic context (e.g. by + JFFS2 + MTD) so we can't use a mutex */ +@@ -82,42 +82,6 @@ struct bcm2835_smi_instance { + + /**************************************************************************** + * +-* SMI clock manager setup +-* +-***************************************************************************/ +- +-static inline void write_smi_cm_reg(struct bcm2835_smi_instance *inst, +- u32 val, unsigned reg) +-{ +- writel(CM_PWD | val, inst->cm_smi_regs_ptr + reg); +-} +- +-static inline u32 read_smi_cm_reg(struct bcm2835_smi_instance *inst, +- unsigned reg) +-{ +- return readl(inst->cm_smi_regs_ptr + reg); +-} +- +-static void smi_setup_clock(struct bcm2835_smi_instance *inst) +-{ +- dev_dbg(inst->dev, "Setting up clock..."); +- /* Disable SMI clock and wait for it to stop. */ +- write_smi_cm_reg(inst, 0, CM_SMI_CTL); +- while (read_smi_cm_reg(inst, CM_SMI_CTL) & CM_SMI_CTL_BUSY) +- ; +- +- write_smi_cm_reg(inst, (inst->clock_divisor << CM_SMI_DIV_DIVI_OFFS), +- CM_SMI_DIV); +- write_smi_cm_reg(inst, (inst->clock_source << CM_SMI_CTL_SRC_OFFS), +- CM_SMI_CTL); +- +- /* Enable the clock */ +- write_smi_cm_reg(inst, (inst->clock_source << CM_SMI_CTL_SRC_OFFS) | +- CM_SMI_CTL_ENAB, CM_SMI_CTL); +-} +- +-/**************************************************************************** +-* + * SMI peripheral setup + * + ***************************************************************************/ +@@ -894,42 +858,40 @@ static int bcm2835_smi_probe(struct plat + struct device_node *node = dev->of_node; + struct resource *ioresource; + struct bcm2835_smi_instance *inst; ++ const __be32 *addr; + ++ /* We require device tree support */ ++ if (!node) ++ return -EINVAL; + /* Allocate buffers and instance data */ +- + inst = devm_kzalloc(dev, sizeof(struct bcm2835_smi_instance), + GFP_KERNEL); +- + if (!inst) + return -ENOMEM; + + inst->dev = dev; + spin_lock_init(&inst->transaction_lock); + +- /* We require device tree support */ +- if (!node) +- return -EINVAL; +- + ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + inst->smi_regs_ptr = devm_ioremap_resource(dev, ioresource); +- ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 1); +- inst->cm_smi_regs_ptr = devm_ioremap_resource(dev, ioresource); +- inst->smi_regs_busaddr = be32_to_cpu( +- *of_get_address(node, 0, NULL, NULL)); +- of_property_read_u32(node, +- "brcm,smi-clock-source", +- &inst->clock_source); +- of_property_read_u32(node, +- "brcm,smi-clock-divisor", +- &inst->clock_divisor); ++ if (IS_ERR(inst->smi_regs_ptr)) { ++ err = PTR_ERR(inst->smi_regs_ptr); ++ goto err; ++ } ++ addr = of_get_address(node, 0, NULL, NULL); ++ inst->smi_regs_busaddr = be32_to_cpu(addr); + + err = bcm2835_smi_dma_setup(inst); + if (err) +- return err; ++ goto err; + +- /* Finally, do peripheral setup */ ++ /* request clock */ ++ inst->clk = devm_clk_get(dev, NULL); ++ if (!inst->clk) ++ goto err; ++ clk_prepare_enable(inst->clk); + +- smi_setup_clock(inst); ++ /* Finally, do peripheral setup */ + smi_setup_regs(inst); + + platform_set_drvdata(pdev, inst); +@@ -937,6 +899,9 @@ static int bcm2835_smi_probe(struct plat + dev_info(inst->dev, "initialised"); + + return 0; ++err: ++ kfree(inst); ++ return err; + } + + /**************************************************************************** +@@ -950,6 +915,11 @@ static int bcm2835_smi_remove(struct pla + struct bcm2835_smi_instance *inst = platform_get_drvdata(pdev); + struct device *dev = inst->dev; + ++ dmaengine_terminate_all(inst->dma_chan); ++ dma_release_channel(inst->dma_chan); ++ ++ clk_disable_unprepare(inst->clk); ++ + dev_info(dev, "SMI device removed - OK"); + return 0; + } diff --git a/target/linux/brcm2708/patches-4.9/950-0044-Add-SMI-NAND-driver.patch b/target/linux/brcm2708/patches-4.9/950-0044-Add-SMI-NAND-driver.patch new file mode 100644 index 000000000000..ec6010a29661 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0044-Add-SMI-NAND-driver.patch @@ -0,0 +1,357 @@ +From be64c4dbf6be17ce20ee214478509a3738256d46 Mon Sep 17 00:00:00 2001 +From: Luke Wren +Date: Sat, 5 Sep 2015 01:16:10 +0100 +Subject: [PATCH] Add SMI NAND driver + +Signed-off-by: Luke Wren +--- + .../bindings/mtd/brcm,bcm2835-smi-nand.txt | 42 ++++ + drivers/mtd/nand/Kconfig | 7 + + drivers/mtd/nand/Makefile | 1 + + drivers/mtd/nand/bcm2835_smi_nand.c | 267 +++++++++++++++++++++ + 4 files changed, 317 insertions(+) + create mode 100644 Documentation/devicetree/bindings/mtd/brcm,bcm2835-smi-nand.txt + create mode 100644 drivers/mtd/nand/bcm2835_smi_nand.c + +--- /dev/null ++++ b/Documentation/devicetree/bindings/mtd/brcm,bcm2835-smi-nand.txt +@@ -0,0 +1,42 @@ ++* BCM2835 SMI NAND flash ++ ++This driver is a shim between the BCM2835 SMI driver (SMI is a peripheral for ++talking to parallel register interfaces) and Linux's MTD layer. ++ ++Required properties: ++- compatible: "brcm,bcm2835-smi-nand" ++- status: "okay" ++ ++Optional properties: ++- partition@n, where n is an integer from a consecutive sequence starting at 0 ++ - Difficult to store partition table on NAND device - normally put it ++ in the source code, kernel bootparams, or device tree (the best way!) ++ - Sub-properties: ++ - label: the partition name, as shown by mtdinfo /dev/mtd* ++ - reg: the size and offset of this partition. ++ - (optional) read-only: an empty property flagging as read only ++ ++Example: ++ ++nand: flash@0 { ++ compatible = "brcm,bcm2835-smi-nand"; ++ status = "okay"; ++ ++ partition@0 { ++ label = "stage2"; ++ // 128k ++ reg = <0 0x20000>; ++ read-only; ++ }; ++ partition@1 { ++ label = "firmware"; ++ // 16M ++ reg = <0x20000 0x1000000>; ++ read-only; ++ }; ++ partition@2 { ++ label = "root"; ++ // 2G ++ reg = <0x1020000 0x80000000>; ++ }; ++}; +\ No newline at end of file +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -41,6 +41,13 @@ config MTD_SM_COMMON + tristate + default n + ++config MTD_NAND_BCM2835_SMI ++ tristate "Use Broadcom's Secondary Memory Interface as a NAND controller (BCM283x)" ++ depends on BCM2835_SMI ++ default m ++ help ++ Uses the BCM2835's SMI peripheral as a NAND controller. ++ + config MTD_NAND_DENALI + tristate + +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -14,6 +14,7 @@ obj-$(CONFIG_MTD_NAND_DENALI) += denali + obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o + obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o + obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o ++obj-$(CONFIG_MTD_NAND_BCM2835_SMI) += bcm2835_smi_nand.o + obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o + obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o + obj-$(CONFIG_MTD_NAND_DAVINCI) += davinci_nand.o +--- /dev/null ++++ b/drivers/mtd/nand/bcm2835_smi_nand.c +@@ -0,0 +1,267 @@ ++/** ++ * NAND flash driver for Broadcom Secondary Memory Interface ++ * ++ * Written by Luke Wren ++ * Copyright (c) 2015, Raspberry Pi (Trading) Ltd. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") version 2, as published by the Free ++ * Software Foundation. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define DEVICE_NAME "bcm2835-smi-nand" ++#define DRIVER_NAME "smi-nand-bcm2835" ++ ++struct bcm2835_smi_nand_host { ++ struct bcm2835_smi_instance *smi_inst; ++ struct nand_chip nand_chip; ++ struct mtd_info mtd; ++ struct device *dev; ++}; ++ ++/**************************************************************************** ++* ++* NAND functionality implementation ++* ++****************************************************************************/ ++ ++#define SMI_NAND_CLE_PIN 0x01 ++#define SMI_NAND_ALE_PIN 0x02 ++ ++static inline void bcm2835_smi_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, ++ unsigned int ctrl) ++{ ++ uint32_t cmd32 = cmd; ++ uint32_t addr = ~(SMI_NAND_CLE_PIN | SMI_NAND_ALE_PIN); ++ struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); ++ struct bcm2835_smi_instance *inst = host->smi_inst; ++ ++ if (ctrl & NAND_CLE) ++ addr |= SMI_NAND_CLE_PIN; ++ if (ctrl & NAND_ALE) ++ addr |= SMI_NAND_ALE_PIN; ++ /* Lower ALL the CS pins! */ ++ if (ctrl & NAND_NCE) ++ addr &= (SMI_NAND_CLE_PIN | SMI_NAND_ALE_PIN); ++ ++ bcm2835_smi_set_address(inst, addr); ++ ++ if (cmd != NAND_CMD_NONE) ++ bcm2835_smi_write_buf(inst, &cmd32, 1); ++} ++ ++static inline uint8_t bcm2835_smi_nand_read_byte(struct mtd_info *mtd) ++{ ++ uint8_t byte; ++ struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); ++ struct bcm2835_smi_instance *inst = host->smi_inst; ++ ++ bcm2835_smi_read_buf(inst, &byte, 1); ++ return byte; ++} ++ ++static inline void bcm2835_smi_nand_write_byte(struct mtd_info *mtd, ++ uint8_t byte) ++{ ++ struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); ++ struct bcm2835_smi_instance *inst = host->smi_inst; ++ ++ bcm2835_smi_write_buf(inst, &byte, 1); ++} ++ ++static inline void bcm2835_smi_nand_write_buf(struct mtd_info *mtd, ++ const uint8_t *buf, int len) ++{ ++ struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); ++ struct bcm2835_smi_instance *inst = host->smi_inst; ++ ++ bcm2835_smi_write_buf(inst, buf, len); ++} ++ ++static inline void bcm2835_smi_nand_read_buf(struct mtd_info *mtd, ++ uint8_t *buf, int len) ++{ ++ struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); ++ struct bcm2835_smi_instance *inst = host->smi_inst; ++ ++ bcm2835_smi_read_buf(inst, buf, len); ++} ++ ++/**************************************************************************** ++* ++* Probe and remove functions ++* ++***************************************************************************/ ++ ++static int bcm2835_smi_nand_probe(struct platform_device *pdev) ++{ ++ struct bcm2835_smi_nand_host *host; ++ struct nand_chip *this; ++ struct mtd_info *mtd; ++ struct device *dev = &pdev->dev; ++ struct device_node *node = dev->of_node, *smi_node; ++ struct mtd_part_parser_data ppdata; ++ struct smi_settings *smi_settings; ++ struct bcm2835_smi_instance *smi_inst; ++ int ret = -ENXIO; ++ ++ if (!node) { ++ dev_err(dev, "No device tree node supplied!"); ++ return -EINVAL; ++ } ++ ++ smi_node = of_parse_phandle(node, "smi_handle", 0); ++ ++ /* Request use of SMI peripheral: */ ++ smi_inst = bcm2835_smi_get(smi_node); ++ ++ if (!smi_inst) { ++ dev_err(dev, "Could not register with SMI."); ++ return -EPROBE_DEFER; ++ } ++ ++ /* Set SMI timing and bus width */ ++ ++ smi_settings = bcm2835_smi_get_settings_from_regs(smi_inst); ++ ++ smi_settings->data_width = SMI_WIDTH_8BIT; ++ smi_settings->read_setup_time = 2; ++ smi_settings->read_hold_time = 1; ++ smi_settings->read_pace_time = 1; ++ smi_settings->read_strobe_time = 3; ++ ++ smi_settings->write_setup_time = 2; ++ smi_settings->write_hold_time = 1; ++ smi_settings->write_pace_time = 1; ++ smi_settings->write_strobe_time = 3; ++ ++ bcm2835_smi_set_regs_from_settings(smi_inst); ++ ++ host = devm_kzalloc(dev, sizeof(struct bcm2835_smi_nand_host), ++ GFP_KERNEL); ++ if (!host) ++ return -ENOMEM; ++ ++ host->dev = dev; ++ host->smi_inst = smi_inst; ++ ++ platform_set_drvdata(pdev, host); ++ ++ /* Link the structures together */ ++ ++ this = &host->nand_chip; ++ mtd = &host->mtd; ++ mtd->priv = this; ++ mtd->owner = THIS_MODULE; ++ mtd->dev.parent = dev; ++ mtd->name = DRIVER_NAME; ++ ++ /* 20 us command delay time... */ ++ this->chip_delay = 20; ++ ++ this->priv = host; ++ this->cmd_ctrl = bcm2835_smi_nand_cmd_ctrl; ++ this->read_byte = bcm2835_smi_nand_read_byte; ++ this->write_byte = bcm2835_smi_nand_write_byte; ++ this->write_buf = bcm2835_smi_nand_write_buf; ++ this->read_buf = bcm2835_smi_nand_read_buf; ++ ++ this->ecc.mode = NAND_ECC_SOFT; ++ ++ /* Should never be accessed directly: */ ++ ++ this->IO_ADDR_R = (void *)0xdeadbeef; ++ this->IO_ADDR_W = (void *)0xdeadbeef; ++ ++ /* First scan to find the device and get the page size */ ++ ++ if (nand_scan_ident(mtd, 1, NULL)) ++ return -ENXIO; ++ ++ /* Second phase scan */ ++ ++ if (nand_scan_tail(mtd)) ++ return -ENXIO; ++ ++ ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); ++ if (!ret) ++ return 0; ++ ++ nand_release(mtd); ++ return -EINVAL; ++} ++ ++static int bcm2835_smi_nand_remove(struct platform_device *pdev) ++{ ++ struct bcm2835_smi_nand_host *host = platform_get_drvdata(pdev); ++ ++ nand_release(&host->mtd); ++ ++ return 0; ++} ++ ++/**************************************************************************** ++* ++* Register the driver with device tree ++* ++***************************************************************************/ ++ ++static const struct of_device_id bcm2835_smi_nand_of_match[] = { ++ {.compatible = "brcm,bcm2835-smi-nand",}, ++ { /* sentinel */ } ++}; ++ ++MODULE_DEVICE_TABLE(of, bcm2835_smi_nand_of_match); ++ ++static struct platform_driver bcm2835_smi_nand_driver = { ++ .probe = bcm2835_smi_nand_probe, ++ .remove = bcm2835_smi_nand_remove, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2835_smi_nand_of_match, ++ }, ++}; ++ ++module_platform_driver(bcm2835_smi_nand_driver); ++ ++MODULE_ALIAS("platform:smi-nand-bcm2835"); ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION ++ ("Driver for NAND chips using Broadcom Secondary Memory Interface"); ++MODULE_AUTHOR("Luke Wren "); diff --git a/target/linux/brcm2708/patches-4.9/950-0045-lirc-added-support-for-RaspberryPi-GPIO.patch b/target/linux/brcm2708/patches-4.9/950-0045-lirc-added-support-for-RaspberryPi-GPIO.patch new file mode 100644 index 000000000000..0cbc1c45a47f --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0045-lirc-added-support-for-RaspberryPi-GPIO.patch @@ -0,0 +1,855 @@ +From 277c109833c1d78543bec0723ab42f4c79937df9 Mon Sep 17 00:00:00 2001 +From: Aron Szabo +Date: Sat, 16 Jun 2012 12:15:55 +0200 +Subject: [PATCH] lirc: added support for RaspberryPi GPIO + +lirc_rpi: Use read_current_timer to determine transmitter delay. Thanks to jjmz and others +See: https://github.com/raspberrypi/linux/issues/525 + +lirc: Remove restriction on gpio pins that can be used with lirc + +Compute Module, for example could use different pins + +lirc_rpi: Add parameter to specify input pin pull + +Depending on the connected IR circuitry it might be desirable to change the +gpios internal pull from it pull-down default behaviour. Add a module +parameter to allow the user to set it explicitly. + +Signed-off-by: Julian Scheel + +lirc-rpi: Use the higher-level irq control functions + +This module used to access the irq_chip methods of the +gpio controller directly, rather than going through the +standard enable_irq/irq_set_irq_type functions. This +caused problems on pinctrl-bcm2835 which only implements +the irq_enable/disable methods and not irq_unmask/mask. + +lirc-rpi: Correct the interrupt usage + +1) Correct the use of enable_irq (i.e. don't call it so often) +2) Correct the shutdown sequence. +3) Avoid a bcm2708_gpio driver quirk by setting the irq flags earlier + +lirc-rpi: use getnstimeofday instead of read_current_timer + +read_current_timer isn't guaranteed to return values in +microseconds, and indeed it doesn't on a Pi2. + +Issue: linux#827 + +lirc-rpi: Add device tree support, and a suitable overlay + +The overlay supports DT parameters that match the old module +parameters, except that gpio_in_pull should be set using the +strings "up", "down" or "off". + +lirc-rpi: Also support pinctrl-bcm2835 in non-DT mode + +fix auto-sense in lirc_rpi driver + +On a Raspberry Pi 2, the lirc_rpi driver might receive spurious +interrupts and change it's low-active / high-active setting. +When this happens, the IR remote control stops working. + +This patch disables this auto-detection if the 'sense' parameter +was set in the device tree, making the driver robust to such +spurious interrupts. +--- + drivers/staging/media/lirc/Kconfig | 6 + + drivers/staging/media/lirc/Makefile | 1 + + drivers/staging/media/lirc/lirc_rpi.c | 734 ++++++++++++++++++++++++++++++++++ + include/linux/platform_data/bcm2708.h | 23 ++ + 4 files changed, 764 insertions(+) + create mode 100644 drivers/staging/media/lirc/lirc_rpi.c + create mode 100644 include/linux/platform_data/bcm2708.h + +--- a/drivers/staging/media/lirc/Kconfig ++++ b/drivers/staging/media/lirc/Kconfig +@@ -32,6 +32,12 @@ config LIRC_PARALLEL + help + Driver for Homebrew Parallel Port Receivers + ++config LIRC_RPI ++ tristate "Homebrew GPIO Port Receiver/Transmitter for the RaspberryPi" ++ depends on LIRC ++ help ++ Driver for Homebrew GPIO Port Receiver/Transmitter for the RaspberryPi ++ + config LIRC_SASEM + tristate "Sasem USB IR Remote" + depends on LIRC && USB +--- a/drivers/staging/media/lirc/Makefile ++++ b/drivers/staging/media/lirc/Makefile +@@ -6,6 +6,7 @@ + obj-$(CONFIG_LIRC_BT829) += lirc_bt829.o + obj-$(CONFIG_LIRC_IMON) += lirc_imon.o + obj-$(CONFIG_LIRC_PARALLEL) += lirc_parallel.o ++obj-$(CONFIG_LIRC_RPI) += lirc_rpi.o + obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o + obj-$(CONFIG_LIRC_SERIAL) += lirc_serial.o + obj-$(CONFIG_LIRC_SIR) += lirc_sir.o +--- /dev/null ++++ b/drivers/staging/media/lirc/lirc_rpi.c +@@ -0,0 +1,734 @@ ++/* ++ * lirc_rpi.c ++ * ++ * lirc_rpi - Device driver that records pulse- and pause-lengths ++ * (space-lengths) (just like the lirc_serial driver does) ++ * between GPIO interrupt events on the Raspberry Pi. ++ * Lots of code has been taken from the lirc_serial module, ++ * so I would like say thanks to the authors. ++ * ++ * Copyright (C) 2012 Aron Robert Szabo , ++ * Michael Bishop ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define LIRC_DRIVER_NAME "lirc_rpi" ++#define RBUF_LEN 256 ++#define LIRC_TRANSMITTER_LATENCY 50 ++ ++#ifndef MAX_UDELAY_MS ++#define MAX_UDELAY_US 5000 ++#else ++#define MAX_UDELAY_US (MAX_UDELAY_MS*1000) ++#endif ++ ++#define dprintk(fmt, args...) \ ++ do { \ ++ if (debug) \ ++ printk(KERN_DEBUG LIRC_DRIVER_NAME ": " \ ++ fmt, ## args); \ ++ } while (0) ++ ++/* module parameters */ ++ ++/* set the default GPIO input pin */ ++static int gpio_in_pin = 18; ++/* set the default pull behaviour for input pin */ ++static int gpio_in_pull = BCM2708_PULL_DOWN; ++/* set the default GPIO output pin */ ++static int gpio_out_pin = 17; ++/* enable debugging messages */ ++static bool debug; ++/* -1 = auto, 0 = active high, 1 = active low */ ++static int sense = -1; ++/* use softcarrier by default */ ++static bool softcarrier = 1; ++/* 0 = do not invert output, 1 = invert output */ ++static bool invert = 0; ++ ++struct gpio_chip *gpiochip; ++static int irq_num; ++static int auto_sense = 1; ++ ++/* forward declarations */ ++static long send_pulse(unsigned long length); ++static void send_space(long length); ++static void lirc_rpi_exit(void); ++ ++static struct platform_device *lirc_rpi_dev; ++static struct timeval lasttv = { 0, 0 }; ++static struct lirc_buffer rbuf; ++static spinlock_t lock; ++ ++/* initialized/set in init_timing_params() */ ++static unsigned int freq = 38000; ++static unsigned int duty_cycle = 50; ++static unsigned long period; ++static unsigned long pulse_width; ++static unsigned long space_width; ++ ++static void safe_udelay(unsigned long usecs) ++{ ++ while (usecs > MAX_UDELAY_US) { ++ udelay(MAX_UDELAY_US); ++ usecs -= MAX_UDELAY_US; ++ } ++ udelay(usecs); ++} ++ ++static unsigned long read_current_us(void) ++{ ++ struct timespec now; ++ getnstimeofday(&now); ++ return (now.tv_sec * 1000000) + (now.tv_nsec/1000); ++} ++ ++static int init_timing_params(unsigned int new_duty_cycle, ++ unsigned int new_freq) ++{ ++ if (1000 * 1000000L / new_freq * new_duty_cycle / 100 <= ++ LIRC_TRANSMITTER_LATENCY) ++ return -EINVAL; ++ if (1000 * 1000000L / new_freq * (100 - new_duty_cycle) / 100 <= ++ LIRC_TRANSMITTER_LATENCY) ++ return -EINVAL; ++ duty_cycle = new_duty_cycle; ++ freq = new_freq; ++ period = 1000 * 1000000L / freq; ++ pulse_width = period * duty_cycle / 100; ++ space_width = period - pulse_width; ++ dprintk("in init_timing_params, freq=%d pulse=%ld, " ++ "space=%ld\n", freq, pulse_width, space_width); ++ return 0; ++} ++ ++static long send_pulse_softcarrier(unsigned long length) ++{ ++ int flag; ++ unsigned long actual, target; ++ unsigned long actual_us, initial_us, target_us; ++ ++ length *= 1000; ++ ++ actual = 0; target = 0; flag = 0; ++ actual_us = read_current_us(); ++ ++ while (actual < length) { ++ if (flag) { ++ gpiochip->set(gpiochip, gpio_out_pin, invert); ++ target += space_width; ++ } else { ++ gpiochip->set(gpiochip, gpio_out_pin, !invert); ++ target += pulse_width; ++ } ++ initial_us = actual_us; ++ target_us = actual_us + (target - actual) / 1000; ++ /* ++ * Note - we've checked in ioctl that the pulse/space ++ * widths are big enough so that d is > 0 ++ */ ++ if ((int)(target_us - actual_us) > 0) ++ udelay(target_us - actual_us); ++ actual_us = read_current_us(); ++ actual += (actual_us - initial_us) * 1000; ++ flag = !flag; ++ } ++ return (actual-length) / 1000; ++} ++ ++static long send_pulse(unsigned long length) ++{ ++ if (length <= 0) ++ return 0; ++ ++ if (softcarrier) { ++ return send_pulse_softcarrier(length); ++ } else { ++ gpiochip->set(gpiochip, gpio_out_pin, !invert); ++ safe_udelay(length); ++ return 0; ++ } ++} ++ ++static void send_space(long length) ++{ ++ gpiochip->set(gpiochip, gpio_out_pin, invert); ++ if (length <= 0) ++ return; ++ safe_udelay(length); ++} ++ ++static void rbwrite(int l) ++{ ++ if (lirc_buffer_full(&rbuf)) { ++ /* no new signals will be accepted */ ++ dprintk("Buffer overrun\n"); ++ return; ++ } ++ lirc_buffer_write(&rbuf, (void *)&l); ++} ++ ++static void frbwrite(int l) ++{ ++ /* simple noise filter */ ++ static int pulse, space; ++ static unsigned int ptr; ++ ++ if (ptr > 0 && (l & PULSE_BIT)) { ++ pulse += l & PULSE_MASK; ++ if (pulse > 250) { ++ rbwrite(space); ++ rbwrite(pulse | PULSE_BIT); ++ ptr = 0; ++ pulse = 0; ++ } ++ return; ++ } ++ if (!(l & PULSE_BIT)) { ++ if (ptr == 0) { ++ if (l > 20000) { ++ space = l; ++ ptr++; ++ return; ++ } ++ } else { ++ if (l > 20000) { ++ space += pulse; ++ if (space > PULSE_MASK) ++ space = PULSE_MASK; ++ space += l; ++ if (space > PULSE_MASK) ++ space = PULSE_MASK; ++ pulse = 0; ++ return; ++ } ++ rbwrite(space); ++ rbwrite(pulse | PULSE_BIT); ++ ptr = 0; ++ pulse = 0; ++ } ++ } ++ rbwrite(l); ++} ++ ++static irqreturn_t irq_handler(int i, void *blah, struct pt_regs *regs) ++{ ++ struct timeval tv; ++ long deltv; ++ int data; ++ int signal; ++ ++ /* use the GPIO signal level */ ++ signal = gpiochip->get(gpiochip, gpio_in_pin); ++ ++ if (sense != -1) { ++ /* get current time */ ++ do_gettimeofday(&tv); ++ ++ /* calc time since last interrupt in microseconds */ ++ deltv = tv.tv_sec-lasttv.tv_sec; ++ if (tv.tv_sec < lasttv.tv_sec || ++ (tv.tv_sec == lasttv.tv_sec && ++ tv.tv_usec < lasttv.tv_usec)) { ++ printk(KERN_WARNING LIRC_DRIVER_NAME ++ ": AIEEEE: your clock just jumped backwards\n"); ++ printk(KERN_WARNING LIRC_DRIVER_NAME ++ ": %d %d %lx %lx %lx %lx\n", signal, sense, ++ tv.tv_sec, lasttv.tv_sec, ++ tv.tv_usec, lasttv.tv_usec); ++ data = PULSE_MASK; ++ } else if (deltv > 15) { ++ data = PULSE_MASK; /* really long time */ ++ if (!(signal^sense)) { ++ /* sanity check */ ++ printk(KERN_DEBUG LIRC_DRIVER_NAME ++ ": AIEEEE: %d %d %lx %lx %lx %lx\n", ++ signal, sense, tv.tv_sec, lasttv.tv_sec, ++ tv.tv_usec, lasttv.tv_usec); ++ /* ++ * detecting pulse while this ++ * MUST be a space! ++ */ ++ if (auto_sense) { ++ sense = sense ? 0 : 1; ++ } ++ } ++ } else { ++ data = (int) (deltv*1000000 + ++ (tv.tv_usec - lasttv.tv_usec)); ++ } ++ frbwrite(signal^sense ? data : (data|PULSE_BIT)); ++ lasttv = tv; ++ wake_up_interruptible(&rbuf.wait_poll); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++static int is_right_chip(struct gpio_chip *chip, void *data) ++{ ++ dprintk("is_right_chip %s %d\n", chip->label, strcmp(data, chip->label)); ++ ++ if (strcmp(data, chip->label) == 0) ++ return 1; ++ return 0; ++} ++ ++static inline int read_bool_property(const struct device_node *np, ++ const char *propname, ++ bool *out_value) ++{ ++ u32 value = 0; ++ int err = of_property_read_u32(np, propname, &value); ++ if (err == 0) ++ *out_value = (value != 0); ++ return err; ++} ++ ++static void read_pin_settings(struct device_node *node) ++{ ++ u32 pin; ++ int index; ++ ++ for (index = 0; ++ of_property_read_u32_index( ++ node, ++ "brcm,pins", ++ index, ++ &pin) == 0; ++ index++) { ++ u32 function; ++ int err; ++ err = of_property_read_u32_index( ++ node, ++ "brcm,function", ++ index, ++ &function); ++ if (err == 0) { ++ if (function == 1) /* Output */ ++ gpio_out_pin = pin; ++ else if (function == 0) /* Input */ ++ gpio_in_pin = pin; ++ } ++ } ++} ++ ++static int init_port(void) ++{ ++ int i, nlow, nhigh; ++ struct device_node *node; ++ ++ node = lirc_rpi_dev->dev.of_node; ++ ++ gpiochip = gpiochip_find("bcm2708_gpio", is_right_chip); ++ ++ /* ++ * Because of the lack of a setpull function, only support ++ * pinctrl-bcm2835 if using device tree. ++ */ ++ if (!gpiochip && node) ++ gpiochip = gpiochip_find("pinctrl-bcm2835", is_right_chip); ++ ++ if (!gpiochip) { ++ pr_err(LIRC_DRIVER_NAME ": gpio chip not found!\n"); ++ return -ENODEV; ++ } ++ ++ if (node) { ++ struct device_node *pins_node; ++ ++ pins_node = of_parse_phandle(node, "pinctrl-0", 0); ++ if (!pins_node) { ++ printk(KERN_ERR LIRC_DRIVER_NAME ++ ": pinctrl settings not found!\n"); ++ return -EINVAL; ++ } ++ ++ read_pin_settings(pins_node); ++ ++ of_property_read_u32(node, "rpi,sense", &sense); ++ ++ read_bool_property(node, "rpi,softcarrier", &softcarrier); ++ ++ read_bool_property(node, "rpi,invert", &invert); ++ ++ read_bool_property(node, "rpi,debug", &debug); ++ ++ } else { ++ return -EINVAL; ++ } ++ ++ gpiochip->set(gpiochip, gpio_out_pin, invert); ++ ++ irq_num = gpiochip->to_irq(gpiochip, gpio_in_pin); ++ dprintk("to_irq %d\n", irq_num); ++ ++ /* if pin is high, then this must be an active low receiver. */ ++ if (sense == -1) { ++ /* wait 1/2 sec for the power supply */ ++ msleep(500); ++ ++ /* ++ * probe 9 times every 0.04s, collect "votes" for ++ * active high/low ++ */ ++ nlow = 0; ++ nhigh = 0; ++ for (i = 0; i < 9; i++) { ++ if (gpiochip->get(gpiochip, gpio_in_pin)) ++ nlow++; ++ else ++ nhigh++; ++ msleep(40); ++ } ++ sense = (nlow >= nhigh ? 1 : 0); ++ printk(KERN_INFO LIRC_DRIVER_NAME ++ ": auto-detected active %s receiver on GPIO pin %d\n", ++ sense ? "low" : "high", gpio_in_pin); ++ } else { ++ printk(KERN_INFO LIRC_DRIVER_NAME ++ ": manually using active %s receiver on GPIO pin %d\n", ++ sense ? "low" : "high", gpio_in_pin); ++ auto_sense = 0; ++ } ++ ++ return 0; ++} ++ ++// called when the character device is opened ++static int set_use_inc(void *data) ++{ ++ int result; ++ ++ /* initialize timestamp */ ++ do_gettimeofday(&lasttv); ++ ++ result = request_irq(irq_num, ++ (irq_handler_t) irq_handler, ++ IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING, ++ LIRC_DRIVER_NAME, (void*) 0); ++ ++ switch (result) { ++ case -EBUSY: ++ printk(KERN_ERR LIRC_DRIVER_NAME ++ ": IRQ %d is busy\n", ++ irq_num); ++ return -EBUSY; ++ case -EINVAL: ++ printk(KERN_ERR LIRC_DRIVER_NAME ++ ": Bad irq number or handler\n"); ++ return -EINVAL; ++ default: ++ dprintk("Interrupt %d obtained\n", ++ irq_num); ++ break; ++ }; ++ ++ /* initialize pulse/space widths */ ++ init_timing_params(duty_cycle, freq); ++ ++ return 0; ++} ++ ++static void set_use_dec(void *data) ++{ ++ /* GPIO Pin Falling/Rising Edge Detect Disable */ ++ irq_set_irq_type(irq_num, 0); ++ disable_irq(irq_num); ++ ++ free_irq(irq_num, (void *) 0); ++ ++ dprintk(KERN_INFO LIRC_DRIVER_NAME ++ ": freed IRQ %d\n", irq_num); ++} ++ ++static ssize_t lirc_write(struct file *file, const char *buf, ++ size_t n, loff_t *ppos) ++{ ++ int i, count; ++ unsigned long flags; ++ long delta = 0; ++ int *wbuf; ++ ++ count = n / sizeof(int); ++ if (n % sizeof(int) || count % 2 == 0) ++ return -EINVAL; ++ wbuf = memdup_user(buf, n); ++ if (IS_ERR(wbuf)) ++ return PTR_ERR(wbuf); ++ spin_lock_irqsave(&lock, flags); ++ ++ for (i = 0; i < count; i++) { ++ if (i%2) ++ send_space(wbuf[i] - delta); ++ else ++ delta = send_pulse(wbuf[i]); ++ } ++ gpiochip->set(gpiochip, gpio_out_pin, invert); ++ ++ spin_unlock_irqrestore(&lock, flags); ++ kfree(wbuf); ++ return n; ++} ++ ++static long lirc_ioctl(struct file *filep, unsigned int cmd, unsigned long arg) ++{ ++ int result; ++ __u32 value; ++ ++ switch (cmd) { ++ case LIRC_GET_SEND_MODE: ++ return -ENOIOCTLCMD; ++ break; ++ ++ case LIRC_SET_SEND_MODE: ++ result = get_user(value, (__u32 *) arg); ++ if (result) ++ return result; ++ /* only LIRC_MODE_PULSE supported */ ++ if (value != LIRC_MODE_PULSE) ++ return -ENOSYS; ++ break; ++ ++ case LIRC_GET_LENGTH: ++ return -ENOSYS; ++ break; ++ ++ case LIRC_SET_SEND_DUTY_CYCLE: ++ dprintk("SET_SEND_DUTY_CYCLE\n"); ++ result = get_user(value, (__u32 *) arg); ++ if (result) ++ return result; ++ if (value <= 0 || value > 100) ++ return -EINVAL; ++ return init_timing_params(value, freq); ++ break; ++ ++ case LIRC_SET_SEND_CARRIER: ++ dprintk("SET_SEND_CARRIER\n"); ++ result = get_user(value, (__u32 *) arg); ++ if (result) ++ return result; ++ if (value > 500000 || value < 20000) ++ return -EINVAL; ++ return init_timing_params(duty_cycle, value); ++ break; ++ ++ default: ++ return lirc_dev_fop_ioctl(filep, cmd, arg); ++ } ++ return 0; ++} ++ ++static const struct file_operations lirc_fops = { ++ .owner = THIS_MODULE, ++ .write = lirc_write, ++ .unlocked_ioctl = lirc_ioctl, ++ .read = lirc_dev_fop_read, ++ .poll = lirc_dev_fop_poll, ++ .open = lirc_dev_fop_open, ++ .release = lirc_dev_fop_close, ++ .llseek = no_llseek, ++}; ++ ++static struct lirc_driver driver = { ++ .name = LIRC_DRIVER_NAME, ++ .minor = -1, ++ .code_length = 1, ++ .sample_rate = 0, ++ .data = NULL, ++ .add_to_buf = NULL, ++ .rbuf = &rbuf, ++ .set_use_inc = set_use_inc, ++ .set_use_dec = set_use_dec, ++ .fops = &lirc_fops, ++ .dev = NULL, ++ .owner = THIS_MODULE, ++}; ++ ++static const struct of_device_id lirc_rpi_of_match[] = { ++ { .compatible = "rpi,lirc-rpi", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, lirc_rpi_of_match); ++ ++static struct platform_driver lirc_rpi_driver = { ++ .driver = { ++ .name = LIRC_DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(lirc_rpi_of_match), ++ }, ++}; ++ ++static int __init lirc_rpi_init(void) ++{ ++ struct device_node *node; ++ int result; ++ ++ /* Init read buffer. */ ++ result = lirc_buffer_init(&rbuf, sizeof(int), RBUF_LEN); ++ if (result < 0) ++ return -ENOMEM; ++ ++ result = platform_driver_register(&lirc_rpi_driver); ++ if (result) { ++ printk(KERN_ERR LIRC_DRIVER_NAME ++ ": lirc register returned %d\n", result); ++ goto exit_buffer_free; ++ } ++ ++ node = of_find_compatible_node(NULL, NULL, ++ lirc_rpi_of_match[0].compatible); ++ ++ if (node) { ++ /* DT-enabled */ ++ lirc_rpi_dev = of_find_device_by_node(node); ++ WARN_ON(lirc_rpi_dev->dev.of_node != node); ++ of_node_put(node); ++ } ++ else { ++ lirc_rpi_dev = platform_device_alloc(LIRC_DRIVER_NAME, 0); ++ if (!lirc_rpi_dev) { ++ result = -ENOMEM; ++ goto exit_driver_unregister; ++ } ++ ++ result = platform_device_add(lirc_rpi_dev); ++ if (result) ++ goto exit_device_put; ++ } ++ ++ return 0; ++ ++ exit_device_put: ++ platform_device_put(lirc_rpi_dev); ++ ++ exit_driver_unregister: ++ platform_driver_unregister(&lirc_rpi_driver); ++ ++ exit_buffer_free: ++ lirc_buffer_free(&rbuf); ++ ++ return result; ++} ++ ++static void lirc_rpi_exit(void) ++{ ++ if (!lirc_rpi_dev->dev.of_node) ++ platform_device_unregister(lirc_rpi_dev); ++ platform_driver_unregister(&lirc_rpi_driver); ++ lirc_buffer_free(&rbuf); ++} ++ ++static int __init lirc_rpi_init_module(void) ++{ ++ int result; ++ ++ result = lirc_rpi_init(); ++ if (result) ++ return result; ++ ++ result = init_port(); ++ if (result < 0) ++ goto exit_rpi; ++ ++ driver.features = LIRC_CAN_SET_SEND_DUTY_CYCLE | ++ LIRC_CAN_SET_SEND_CARRIER | ++ LIRC_CAN_SEND_PULSE | ++ LIRC_CAN_REC_MODE2; ++ ++ driver.dev = &lirc_rpi_dev->dev; ++ driver.minor = lirc_register_driver(&driver); ++ ++ if (driver.minor < 0) { ++ printk(KERN_ERR LIRC_DRIVER_NAME ++ ": device registration failed with %d\n", result); ++ result = -EIO; ++ goto exit_rpi; ++ } ++ ++ printk(KERN_INFO LIRC_DRIVER_NAME ": driver registered!\n"); ++ ++ return 0; ++ ++ exit_rpi: ++ lirc_rpi_exit(); ++ ++ return result; ++} ++ ++static void __exit lirc_rpi_exit_module(void) ++{ ++ lirc_unregister_driver(driver.minor); ++ ++ gpio_free(gpio_out_pin); ++ gpio_free(gpio_in_pin); ++ ++ lirc_rpi_exit(); ++ ++ printk(KERN_INFO LIRC_DRIVER_NAME ": cleaned up module\n"); ++} ++ ++module_init(lirc_rpi_init_module); ++module_exit(lirc_rpi_exit_module); ++ ++MODULE_DESCRIPTION("Infra-red receiver and blaster driver for Raspberry Pi GPIO."); ++MODULE_AUTHOR("Aron Robert Szabo "); ++MODULE_AUTHOR("Michael Bishop "); ++MODULE_LICENSE("GPL"); ++ ++module_param(gpio_out_pin, int, S_IRUGO); ++MODULE_PARM_DESC(gpio_out_pin, "GPIO output/transmitter pin number of the BCM" ++ " processor. (default 17"); ++ ++module_param(gpio_in_pin, int, S_IRUGO); ++MODULE_PARM_DESC(gpio_in_pin, "GPIO input pin number of the BCM processor." ++ " (default 18"); ++ ++module_param(gpio_in_pull, int, S_IRUGO); ++MODULE_PARM_DESC(gpio_in_pull, "GPIO input pin pull configuration." ++ " (0 = off, 1 = up, 2 = down, default down)"); ++ ++module_param(sense, int, S_IRUGO); ++MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit" ++ " (0 = active high, 1 = active low )"); ++ ++module_param(softcarrier, bool, S_IRUGO); ++MODULE_PARM_DESC(softcarrier, "Software carrier (0 = off, 1 = on, default on)"); ++ ++module_param(invert, bool, S_IRUGO); ++MODULE_PARM_DESC(invert, "Invert output (0 = off, 1 = on, default off"); ++ ++module_param(debug, bool, S_IRUGO | S_IWUSR); ++MODULE_PARM_DESC(debug, "Enable debugging messages"); +--- /dev/null ++++ b/include/linux/platform_data/bcm2708.h +@@ -0,0 +1,23 @@ ++/* ++ * include/linux/platform_data/bcm2708.h ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * (C) 2014 Julian Scheel ++ * ++ */ ++#ifndef __BCM2708_H_ ++#define __BCM2708_H_ ++ ++typedef enum { ++ BCM2708_PULL_OFF, ++ BCM2708_PULL_UP, ++ BCM2708_PULL_DOWN ++} bcm2708_gpio_pull_t; ++ ++extern int bcm2708_gpio_setpull(struct gpio_chip *gc, unsigned offset, ++ bcm2708_gpio_pull_t value); ++ ++#endif diff --git a/target/linux/brcm2708/patches-4.9/950-0046-Add-cpufreq-driver.patch b/target/linux/brcm2708/patches-4.9/950-0046-Add-cpufreq-driver.patch new file mode 100644 index 000000000000..7c5691c120c8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0046-Add-cpufreq-driver.patch @@ -0,0 +1,262 @@ +From 7d4719c360b755637c2e68f9855be282cd0065b6 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Wed, 3 Jul 2013 00:49:20 +0100 +Subject: [PATCH] Add cpufreq driver + +Signed-off-by: popcornmix +--- + drivers/cpufreq/Kconfig.arm | 9 ++ + drivers/cpufreq/Makefile | 1 + + drivers/cpufreq/bcm2835-cpufreq.c | 218 ++++++++++++++++++++++++++++++++++++++ + 3 files changed, 228 insertions(+) + create mode 100644 drivers/cpufreq/bcm2835-cpufreq.c + +--- a/drivers/cpufreq/Kconfig.arm ++++ b/drivers/cpufreq/Kconfig.arm +@@ -220,6 +220,15 @@ config ARM_STI_CPUFREQ + this config option if you wish to add CPUFreq support for STi based + SoCs. + ++config ARM_BCM2835_CPUFREQ ++ depends on RASPBERRYPI_FIRMWARE ++ bool "BCM2835 Driver" ++ default y ++ help ++ This adds the CPUFreq driver for BCM2835 ++ ++ If in doubt, say N. ++ + config ARM_TEGRA20_CPUFREQ + bool "Tegra20 CPUFreq support" + depends on ARCH_TEGRA +--- a/drivers/cpufreq/Makefile ++++ b/drivers/cpufreq/Makefile +@@ -75,6 +75,7 @@ obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa11 + obj-$(CONFIG_ARM_SCPI_CPUFREQ) += scpi-cpufreq.o + obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o + obj-$(CONFIG_ARM_STI_CPUFREQ) += sti-cpufreq.o ++obj-$(CONFIG_ARM_BCM2835_CPUFREQ) += bcm2835-cpufreq.o + obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o + obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o + obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o +--- /dev/null ++++ b/drivers/cpufreq/bcm2835-cpufreq.c +@@ -0,0 +1,218 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++/***************************************************************************** ++* FILENAME: bcm2835-cpufreq.h ++* DESCRIPTION: This driver dynamically manages the CPU Frequency of the ARM ++* processor. Messages are sent to Videocore either setting or requesting the ++* frequency of the ARM in order to match an appropiate frequency to the current ++* usage of the processor. The policy which selects the frequency to use is ++* defined in the kernel .config file, but can be changed during runtime. ++*****************************************************************************/ ++ ++/* ---------- INCLUDES ---------- */ ++#include ++#include ++#include ++#include ++#include ++ ++/* ---------- DEFINES ---------- */ ++/*#define CPUFREQ_DEBUG_ENABLE*/ /* enable debugging */ ++#define MODULE_NAME "bcm2835-cpufreq" ++ ++#define VCMSG_ID_ARM_CLOCK 0x000000003 /* Clock/Voltage ID's */ ++ ++/* debug printk macros */ ++#ifdef CPUFREQ_DEBUG_ENABLE ++#define print_debug(fmt,...) pr_debug("%s:%s:%d: "fmt, MODULE_NAME, __func__, __LINE__, ##__VA_ARGS__) ++#else ++#define print_debug(fmt,...) ++#endif ++#define print_err(fmt,...) pr_err("%s:%s:%d: "fmt, MODULE_NAME, __func__,__LINE__, ##__VA_ARGS__) ++#define print_info(fmt,...) pr_info("%s: "fmt, MODULE_NAME, ##__VA_ARGS__) ++ ++/* ---------- GLOBALS ---------- */ ++static struct cpufreq_driver bcm2835_cpufreq_driver; /* the cpufreq driver global */ ++static unsigned int min_frequency, max_frequency; ++static struct cpufreq_frequency_table bcm2835_freq_table[3]; ++ ++/* ++ =============================================== ++ clk_rate either gets or sets the clock rates. ++ =============================================== ++*/ ++ ++static int bcm2835_cpufreq_clock_property(u32 tag, u32 id, u32 *val) ++{ ++ struct rpi_firmware *fw = rpi_firmware_get(NULL); ++ struct { ++ u32 id; ++ u32 val; ++ } packet; ++ int ret; ++ ++ packet.id = id; ++ packet.val = *val; ++ ret = rpi_firmware_property(fw, tag, &packet, sizeof(packet)); ++ if (ret) ++ return ret; ++ ++ *val = packet.val; ++ ++ return 0; ++} ++ ++static uint32_t bcm2835_cpufreq_set_clock(int cur_rate, int arm_rate) ++{ ++ u32 rate = arm_rate * 1000; ++ int ret; ++ ++ ret = bcm2835_cpufreq_clock_property(RPI_FIRMWARE_SET_CLOCK_RATE, VCMSG_ID_ARM_CLOCK, &rate); ++ if (ret) { ++ print_err("Failed to set clock: %d (%d)\n", arm_rate, ret); ++ return 0; ++ } ++ ++ rate /= 1000; ++ print_debug("Setting new frequency = %d -> %d (actual %d)\n", cur_rate, arm_rate, rate); ++ ++ return rate; ++} ++ ++static uint32_t bcm2835_cpufreq_get_clock(int tag) ++{ ++ u32 rate; ++ int ret; ++ ++ ret = bcm2835_cpufreq_clock_property(tag, VCMSG_ID_ARM_CLOCK, &rate); ++ if (ret) { ++ print_err("Failed to get clock (%d)\n", ret); ++ return 0; ++ } ++ ++ rate /= 1000; ++ print_debug("%s frequency = %u\n", ++ tag == RPI_FIRMWARE_GET_CLOCK_RATE ? "Current": ++ tag == RPI_FIRMWARE_GET_MIN_CLOCK_RATE ? "Min": ++ tag == RPI_FIRMWARE_GET_MAX_CLOCK_RATE ? "Max": ++ "Unexpected", rate); ++ ++ return rate; ++} ++ ++/* ++ ==================================================== ++ Module Initialisation registers the cpufreq driver ++ ==================================================== ++*/ ++static int __init bcm2835_cpufreq_module_init(void) ++{ ++ print_debug("IN\n"); ++ return cpufreq_register_driver(&bcm2835_cpufreq_driver); ++} ++ ++/* ++ ============= ++ Module exit ++ ============= ++*/ ++static void __exit bcm2835_cpufreq_module_exit(void) ++{ ++ print_debug("IN\n"); ++ cpufreq_unregister_driver(&bcm2835_cpufreq_driver); ++ return; ++} ++ ++/* ++ ============================================================== ++ Initialisation function sets up the CPU policy for first use ++ ============================================================== ++*/ ++static int bcm2835_cpufreq_driver_init(struct cpufreq_policy *policy) ++{ ++ /* measured value of how long it takes to change frequency */ ++ const unsigned int transition_latency = 355000; /* ns */ ++ ++ if (!rpi_firmware_get(NULL)) { ++ print_err("Firmware is not available\n"); ++ return -ENODEV; ++ } ++ ++ /* now find out what the maximum and minimum frequencies are */ ++ min_frequency = bcm2835_cpufreq_get_clock(RPI_FIRMWARE_GET_MIN_CLOCK_RATE); ++ max_frequency = bcm2835_cpufreq_get_clock(RPI_FIRMWARE_GET_MAX_CLOCK_RATE); ++ ++ if (min_frequency == max_frequency) { ++ bcm2835_freq_table[0].frequency = min_frequency; ++ bcm2835_freq_table[1].frequency = CPUFREQ_TABLE_END; ++ } else { ++ bcm2835_freq_table[0].frequency = min_frequency; ++ bcm2835_freq_table[1].frequency = max_frequency; ++ bcm2835_freq_table[2].frequency = CPUFREQ_TABLE_END; ++ } ++ ++ print_info("min=%d max=%d\n", min_frequency, max_frequency); ++ return cpufreq_generic_init(policy, bcm2835_freq_table, transition_latency); ++} ++ ++/* ++ ===================================================================== ++ Target index function chooses the requested frequency from the table ++ ===================================================================== ++*/ ++ ++static int bcm2835_cpufreq_driver_target_index(struct cpufreq_policy *policy, unsigned int state) ++{ ++ unsigned int target_freq = state == 0 ? min_frequency : max_frequency; ++ unsigned int cur = bcm2835_cpufreq_set_clock(policy->cur, target_freq); ++ ++ if (!cur) ++ { ++ print_err("Error occurred setting a new frequency (%d)\n", target_freq); ++ return -EINVAL; ++ } ++ print_debug("%s: %i: freq %d->%d\n", policy->governor->name, state, policy->cur, cur); ++ return 0; ++} ++ ++/* ++ ====================================================== ++ Get function returns the current frequency from table ++ ====================================================== ++*/ ++ ++static unsigned int bcm2835_cpufreq_driver_get(unsigned int cpu) ++{ ++ unsigned int actual_rate = bcm2835_cpufreq_get_clock(RPI_FIRMWARE_GET_CLOCK_RATE); ++ print_debug("cpu%d: freq=%d\n", cpu, actual_rate); ++ return actual_rate <= min_frequency ? min_frequency : max_frequency; ++} ++ ++/* the CPUFreq driver */ ++static struct cpufreq_driver bcm2835_cpufreq_driver = { ++ .name = "BCM2835 CPUFreq", ++ .init = bcm2835_cpufreq_driver_init, ++ .verify = cpufreq_generic_frequency_table_verify, ++ .target_index = bcm2835_cpufreq_driver_target_index, ++ .get = bcm2835_cpufreq_driver_get, ++ .attr = cpufreq_generic_attr, ++}; ++ ++MODULE_AUTHOR("Dorian Peake and Dom Cobley"); ++MODULE_DESCRIPTION("CPU frequency driver for BCM2835 chip"); ++MODULE_LICENSE("GPL"); ++ ++module_init(bcm2835_cpufreq_module_init); ++module_exit(bcm2835_cpufreq_module_exit); diff --git a/target/linux/brcm2708/patches-4.9/950-0047-Added-hwmon-thermal-driver-for-reporting-core-temper.patch b/target/linux/brcm2708/patches-4.9/950-0047-Added-hwmon-thermal-driver-for-reporting-core-temper.patch new file mode 100644 index 000000000000..ff6084fe6a8a --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0047-Added-hwmon-thermal-driver-for-reporting-core-temper.patch @@ -0,0 +1,161 @@ +From 3c847bc6c9d6f4115c82943c869c55244b39a5c4 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Tue, 26 Mar 2013 19:24:24 +0000 +Subject: [PATCH] Added hwmon/thermal driver for reporting core temperature. + Thanks Dorian +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +BCM270x: Move thermal sensor to Device Tree + +Add Device Tree support to bcm2835-thermal driver. +Add thermal sensor device to Device Tree. +Don't add platform device when booting in DT mode. + +Signed-off-by: Noralf Trønnes +--- + drivers/thermal/Kconfig | 7 +++ + drivers/thermal/Makefile | 1 + + drivers/thermal/bcm2835-thermal.c | 109 ++++++++++++++++++++++++++++++++++++++ + 3 files changed, 117 insertions(+) + create mode 100644 drivers/thermal/bcm2835-thermal.c + +--- a/drivers/thermal/Kconfig ++++ b/drivers/thermal/Kconfig +@@ -302,6 +302,13 @@ config INTEL_POWERCLAMP + enforce idle time which results in more package C-state residency. The + user interface is exposed via generic thermal framework. + ++config THERMAL_BCM2835 ++ depends on RASPBERRYPI_FIRMWARE ++ tristate "BCM2835 Thermal Driver" ++ help ++ This will enable temperature monitoring for the Broadcom BCM2835 ++ chip. If built as a module, it will be called 'bcm2835-thermal'. ++ + config X86_PKG_TEMP_THERMAL + tristate "X86 package temperature thermal driver" + depends on X86_THERMAL_VECTOR +--- a/drivers/thermal/Makefile ++++ b/drivers/thermal/Makefile +@@ -41,6 +41,7 @@ obj-$(CONFIG_MAX77620_THERMAL) += max776 + obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o + obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o + obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o ++obj-$(CONFIG_THERMAL_BCM2835) += bcm2835-thermal.o + obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o + obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o + obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o +--- /dev/null ++++ b/drivers/thermal/bcm2835-thermal.c +@@ -0,0 +1,109 @@ ++/***************************************************************************** ++* Copyright 2011 Broadcom Corporation. All rights reserved. ++* ++* Unless you and Broadcom execute a separate written software license ++* agreement governing use of this software, this software is licensed to you ++* under the terms of the GNU General Public License version 2, available at ++* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). ++* ++* Notwithstanding the above, under no circumstances may you combine this ++* software in any way with any other Broadcom software provided under a ++* license other than the GPL, without Broadcom's express prior written ++* consent. ++*****************************************************************************/ ++ ++#include ++#include ++#include ++#include ++ ++static int bcm2835_thermal_get_property(struct thermal_zone_device *tz, ++ int *temp, u32 tag) ++{ ++ struct rpi_firmware *fw = tz->devdata; ++ struct { ++ u32 id; ++ u32 val; ++ } packet; ++ int ret; ++ ++ *temp = 0; ++ packet.id = 0; ++ ret = rpi_firmware_property(fw, tag, &packet, sizeof(packet)); ++ if (ret) { ++ dev_err(&tz->device, "Failed to get temperature\n"); ++ return ret; ++ } ++ ++ *temp = packet.val; ++ dev_dbg(&tz->device, "%stemp=%d\n", ++ tag == RPI_FIRMWARE_GET_MAX_TEMPERATURE ? "max" : "", *temp); ++ ++ return 0; ++} ++ ++static int bcm2835_thermal_get_temp(struct thermal_zone_device *tz, ++ int *temp) ++{ ++ return bcm2835_thermal_get_property(tz, temp, ++ RPI_FIRMWARE_GET_TEMPERATURE); ++} ++ ++static struct thermal_zone_device_ops ops = { ++ .get_temp = bcm2835_thermal_get_temp, ++}; ++ ++static int bcm2835_thermal_probe(struct platform_device *pdev) ++{ ++ struct device_node *fw_np; ++ struct rpi_firmware *fw; ++ struct thermal_zone_device *tz; ++ ++ fw_np = of_parse_phandle(pdev->dev.of_node, "firmware", 0); ++ if (!fw_np) { ++ dev_err(&pdev->dev, "Missing firmware node\n"); ++ return -ENOENT; ++ } ++ fw = rpi_firmware_get(fw_np); ++ if (!fw) ++ return -EPROBE_DEFER; ++ ++ tz = thermal_zone_device_register("bcm2835_thermal", 0, 0, fw, &ops, ++ NULL, 0, 0); ++ if (IS_ERR(tz)) { ++ dev_err(&pdev->dev, "Failed to register the thermal device\n"); ++ return PTR_ERR(tz); ++ } ++ ++ platform_set_drvdata(pdev, tz); ++ ++ return 0; ++} ++ ++static int bcm2835_thermal_remove(struct platform_device *pdev) ++{ ++ thermal_zone_device_unregister(platform_get_drvdata(pdev)); ++ ++ return 0; ++} ++ ++static const struct of_device_id bcm2835_thermal_of_match_table[] = { ++ { .compatible = "brcm,bcm2835-thermal", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, bcm2835_thermal_of_match_table); ++ ++static struct platform_driver bcm2835_thermal_driver = { ++ .probe = bcm2835_thermal_probe, ++ .remove = bcm2835_thermal_remove, ++ .driver = { ++ .name = "bcm2835_thermal", ++ .of_match_table = bcm2835_thermal_of_match_table, ++ }, ++}; ++module_platform_driver(bcm2835_thermal_driver); ++ ++MODULE_AUTHOR("Dorian Peake"); ++MODULE_AUTHOR("Noralf Trønnes"); ++MODULE_DESCRIPTION("Thermal driver for bcm2835 chip"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/brcm2708/patches-4.9/950-0048-Add-Chris-Boot-s-i2c-driver.patch b/target/linux/brcm2708/patches-4.9/950-0048-Add-Chris-Boot-s-i2c-driver.patch new file mode 100644 index 000000000000..b86fb40b6216 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0048-Add-Chris-Boot-s-i2c-driver.patch @@ -0,0 +1,660 @@ +From af4e8a3c7b645480f57ec14ded02fba6976ff2d5 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Wed, 17 Jun 2015 15:44:08 +0100 +Subject: [PATCH] Add Chris Boot's i2c driver +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +i2c-bcm2708: fixed baudrate + +Fixed issue where the wrong CDIV value was set for baudrates below 3815 Hz (for 250MHz bus clock). +In that case the computed CDIV value was more than 0xffff. However the CDIV register width is only 16 bits. +This resulted in incorrect setting of CDIV and higher baudrate than intended. +Example: 3500Hz -> CDIV=0x11704 -> CDIV(16bit)=0x1704 -> 42430Hz +After correction: 3500Hz -> CDIV=0x11704 -> CDIV(16bit)=0xffff -> 3815Hz +The correct baudrate is shown in the log after the cdiv > 0xffff correction. + +Perform I2C combined transactions when possible + +Perform I2C combined transactions whenever possible, within the +restrictions of the Broadcomm Serial Controller. + +Disable DONE interrupt during TA poll + +Prevent interrupt from being triggered if poll is missed and transfer +starts and finishes. + +i2c: Make combined transactions optional and disabled by default + +i2c: bcm2708: add device tree support + +Add DT support to driver and add to .dtsi file. +Setup pins in .dts file. +i2c is disabled by default. + +Signed-off-by: Noralf Tronnes + +bcm2708: don't register i2c controllers when using DT + +The devices for the i2c controllers are in the Device Tree. +Only register devices when not using DT. + +Signed-off-by: Noralf Tronnes + +I2C: Only register the I2C device for the current board revision + +i2c_bcm2708: Fix clock reference counting + +Fix grabbing lock from atomic context in i2c driver + +2 main changes: +- check for timeouts in the bcm2708_bsc_setup function as indicated by this comment: + /* poll for transfer start bit (should only take 1-20 polls) */ + This implies that the setup function can now fail so account for this everywhere it's called +- Removed the clk_get_rate call from inside the setup function as it locks a mutex and that's not ok since we call it from under a spin lock. + +i2c-bcm2708: When using DT, leave the GPIO setup to pinctrl + +i2c-bcm2708: Increase timeouts to allow larger transfers + +Use the timeout value provided by the I2C_TIMEOUT ioctl when waiting +for completion. The default timeout is 1 second. + +See: https://github.com/raspberrypi/linux/issues/260 + +i2c-bcm2708/BCM270X_DT: Add support for I2C2 + +The third I2C bus (I2C2) is normally reserved for HDMI use. Careless +use of this bus can break an attached display - use with caution. + +It is recommended to disable accesses by VideoCore by setting +hdmi_ignore_edid=1 or hdmi_edid_file=1 in config.txt. + +The interface is disabled by default - enable using the +i2c2_iknowwhatimdoing DT parameter. + +bcm2708-spi: Don't use static pin configuration with DT + +Also remove superfluous error checking - the SPI framework ensures the +validity of the chip_select value. + +i2c-bcm2708: Remove non-DT support + +Signed-off-by: Noralf Trønnes + +Set the BSC_CLKT clock streching timeout to 35ms as per SMBus specs. + +Fixes i2c_bcm2708: Write to FIFO correctly - v2 (#1574) + +* i2c: fix i2c_bcm2708: Clear FIFO before sending data + +Make sure FIFO gets cleared before trying to send +data in case of a repeated start (COMBINED=Y). + +* i2c: fix i2c_bcm2708: Only write to FIFO when not full + +Check if FIFO can accept data before writing. +To avoid a peripheral read on the last iteration of a loop, +both bcm2708_bsc_fifo_fill and ~drain are changed as well. +--- + drivers/i2c/busses/Kconfig | 19 ++ + drivers/i2c/busses/Makefile | 2 + + drivers/i2c/busses/i2c-bcm2708.c | 512 +++++++++++++++++++++++++++++++++++++++ + 3 files changed, 533 insertions(+) + create mode 100644 drivers/i2c/busses/i2c-bcm2708.c + +--- a/drivers/i2c/busses/Kconfig ++++ b/drivers/i2c/busses/Kconfig +@@ -8,6 +8,25 @@ menu "I2C Hardware Bus support" + comment "PC SMBus host controller drivers" + depends on PCI + ++config I2C_BCM2708 ++ tristate "BCM2708 BSC" ++ depends on ARCH_BCM2835 ++ help ++ Enabling this option will add BSC (Broadcom Serial Controller) ++ support for the BCM2708. BSC is a Broadcom proprietary bus compatible ++ with I2C/TWI/SMBus. ++ ++config I2C_BCM2708_BAUDRATE ++ prompt "BCM2708 I2C baudrate" ++ depends on I2C_BCM2708 ++ int ++ default 100000 ++ help ++ Set the I2C baudrate. This will alter the default value. A ++ different baudrate can be set by using a module parameter as well. If ++ no parameter is provided when loading, this is the value that will be ++ used. ++ + config I2C_ALI1535 + tristate "ALI 1535" + depends on PCI +--- a/drivers/i2c/busses/Makefile ++++ b/drivers/i2c/busses/Makefile +@@ -2,6 +2,8 @@ + # Makefile for the i2c bus drivers. + # + ++obj-$(CONFIG_I2C_BCM2708) += i2c-bcm2708.o ++ + # ACPI drivers + obj-$(CONFIG_I2C_SCMI) += i2c-scmi.o + +--- /dev/null ++++ b/drivers/i2c/busses/i2c-bcm2708.c +@@ -0,0 +1,512 @@ ++/* ++ * Driver for Broadcom BCM2708 BSC Controllers ++ * ++ * Copyright (C) 2012 Chris Boot & Frank Buss ++ * ++ * This driver is inspired by: ++ * i2c-ocores.c, by Peter Korsgaard ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* BSC register offsets */ ++#define BSC_C 0x00 ++#define BSC_S 0x04 ++#define BSC_DLEN 0x08 ++#define BSC_A 0x0c ++#define BSC_FIFO 0x10 ++#define BSC_DIV 0x14 ++#define BSC_DEL 0x18 ++#define BSC_CLKT 0x1c ++ ++/* Bitfields in BSC_C */ ++#define BSC_C_I2CEN 0x00008000 ++#define BSC_C_INTR 0x00000400 ++#define BSC_C_INTT 0x00000200 ++#define BSC_C_INTD 0x00000100 ++#define BSC_C_ST 0x00000080 ++#define BSC_C_CLEAR_1 0x00000020 ++#define BSC_C_CLEAR_2 0x00000010 ++#define BSC_C_READ 0x00000001 ++ ++/* Bitfields in BSC_S */ ++#define BSC_S_CLKT 0x00000200 ++#define BSC_S_ERR 0x00000100 ++#define BSC_S_RXF 0x00000080 ++#define BSC_S_TXE 0x00000040 ++#define BSC_S_RXD 0x00000020 ++#define BSC_S_TXD 0x00000010 ++#define BSC_S_RXR 0x00000008 ++#define BSC_S_TXW 0x00000004 ++#define BSC_S_DONE 0x00000002 ++#define BSC_S_TA 0x00000001 ++ ++#define I2C_WAIT_LOOP_COUNT 200 ++ ++#define DRV_NAME "bcm2708_i2c" ++ ++static unsigned int baudrate; ++module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP); ++MODULE_PARM_DESC(baudrate, "The I2C baudrate"); ++ ++static bool combined = false; ++module_param(combined, bool, 0644); ++MODULE_PARM_DESC(combined, "Use combined transactions"); ++ ++struct bcm2708_i2c { ++ struct i2c_adapter adapter; ++ ++ spinlock_t lock; ++ void __iomem *base; ++ int irq; ++ struct clk *clk; ++ u32 cdiv; ++ u32 clk_tout; ++ ++ struct completion done; ++ ++ struct i2c_msg *msg; ++ int pos; ++ int nmsgs; ++ bool error; ++}; ++ ++static inline u32 bcm2708_rd(struct bcm2708_i2c *bi, unsigned reg) ++{ ++ return readl(bi->base + reg); ++} ++ ++static inline void bcm2708_wr(struct bcm2708_i2c *bi, unsigned reg, u32 val) ++{ ++ writel(val, bi->base + reg); ++} ++ ++static inline void bcm2708_bsc_reset(struct bcm2708_i2c *bi) ++{ ++ bcm2708_wr(bi, BSC_C, 0); ++ bcm2708_wr(bi, BSC_S, BSC_S_CLKT | BSC_S_ERR | BSC_S_DONE); ++} ++ ++static inline void bcm2708_bsc_fifo_drain(struct bcm2708_i2c *bi) ++{ ++ while ((bi->pos < bi->msg->len) && (bcm2708_rd(bi, BSC_S) & BSC_S_RXD)) ++ bi->msg->buf[bi->pos++] = bcm2708_rd(bi, BSC_FIFO); ++} ++ ++static inline void bcm2708_bsc_fifo_fill(struct bcm2708_i2c *bi) ++{ ++ while ((bi->pos < bi->msg->len) && (bcm2708_rd(bi, BSC_S) & BSC_S_TXD)) ++ bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]); ++} ++ ++static inline int bcm2708_bsc_setup(struct bcm2708_i2c *bi) ++{ ++ u32 cdiv, s, clk_tout; ++ u32 c = BSC_C_I2CEN | BSC_C_INTD | BSC_C_ST | BSC_C_CLEAR_1; ++ int wait_loops = I2C_WAIT_LOOP_COUNT; ++ ++ /* Can't call clk_get_rate as it locks a mutex and here we are spinlocked. ++ * Use the value that we cached in the probe. ++ */ ++ cdiv = bi->cdiv; ++ clk_tout = bi->clk_tout; ++ ++ if (bi->msg->flags & I2C_M_RD) ++ c |= BSC_C_INTR | BSC_C_READ; ++ else ++ c |= BSC_C_INTT; ++ ++ bcm2708_wr(bi, BSC_CLKT, clk_tout); ++ bcm2708_wr(bi, BSC_DIV, cdiv); ++ bcm2708_wr(bi, BSC_A, bi->msg->addr); ++ bcm2708_wr(bi, BSC_DLEN, bi->msg->len); ++ if (combined) ++ { ++ /* Do the next two messages meet combined transaction criteria? ++ - Current message is a write, next message is a read ++ - Both messages to same slave address ++ - Write message can fit inside FIFO (16 bytes or less) */ ++ if ( (bi->nmsgs > 1) && ++ !(bi->msg[0].flags & I2C_M_RD) && (bi->msg[1].flags & I2C_M_RD) && ++ (bi->msg[0].addr == bi->msg[1].addr) && (bi->msg[0].len <= 16)) { ++ ++ /* Clear FIFO */ ++ bcm2708_wr(bi, BSC_C, BSC_C_CLEAR_1); ++ ++ /* Fill FIFO with entire write message (16 byte FIFO) */ ++ while (bi->pos < bi->msg->len) { ++ bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]); ++ } ++ /* Start write transfer (no interrupts, don't clear FIFO) */ ++ bcm2708_wr(bi, BSC_C, BSC_C_I2CEN | BSC_C_ST); ++ ++ /* poll for transfer start bit (should only take 1-20 polls) */ ++ do { ++ s = bcm2708_rd(bi, BSC_S); ++ } while (!(s & (BSC_S_TA | BSC_S_ERR | BSC_S_CLKT | BSC_S_DONE)) && --wait_loops >= 0); ++ ++ /* did we time out or some error occured? */ ++ if (wait_loops < 0 || (s & (BSC_S_ERR | BSC_S_CLKT))) { ++ return -1; ++ } ++ ++ /* Send next read message before the write transfer finishes. */ ++ bi->nmsgs--; ++ bi->msg++; ++ bi->pos = 0; ++ bcm2708_wr(bi, BSC_DLEN, bi->msg->len); ++ c = BSC_C_I2CEN | BSC_C_INTD | BSC_C_INTR | BSC_C_ST | BSC_C_READ; ++ } ++ } ++ bcm2708_wr(bi, BSC_C, c); ++ ++ return 0; ++} ++ ++static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id) ++{ ++ struct bcm2708_i2c *bi = dev_id; ++ bool handled = true; ++ u32 s; ++ int ret; ++ ++ spin_lock(&bi->lock); ++ ++ /* we may see camera interrupts on the "other" I2C channel ++ Just return if we've not sent anything */ ++ if (!bi->nmsgs || !bi->msg) { ++ goto early_exit; ++ } ++ ++ s = bcm2708_rd(bi, BSC_S); ++ ++ if (s & (BSC_S_CLKT | BSC_S_ERR)) { ++ bcm2708_bsc_reset(bi); ++ bi->error = true; ++ ++ bi->msg = 0; /* to inform the that all work is done */ ++ bi->nmsgs = 0; ++ /* wake up our bh */ ++ complete(&bi->done); ++ } else if (s & BSC_S_DONE) { ++ bi->nmsgs--; ++ ++ if (bi->msg->flags & I2C_M_RD) { ++ bcm2708_bsc_fifo_drain(bi); ++ } ++ ++ bcm2708_bsc_reset(bi); ++ ++ if (bi->nmsgs) { ++ /* advance to next message */ ++ bi->msg++; ++ bi->pos = 0; ++ ret = bcm2708_bsc_setup(bi); ++ if (ret < 0) { ++ bcm2708_bsc_reset(bi); ++ bi->error = true; ++ bi->msg = 0; /* to inform the that all work is done */ ++ bi->nmsgs = 0; ++ /* wake up our bh */ ++ complete(&bi->done); ++ goto early_exit; ++ } ++ } else { ++ bi->msg = 0; /* to inform the that all work is done */ ++ bi->nmsgs = 0; ++ /* wake up our bh */ ++ complete(&bi->done); ++ } ++ } else if (s & BSC_S_TXW) { ++ bcm2708_bsc_fifo_fill(bi); ++ } else if (s & BSC_S_RXR) { ++ bcm2708_bsc_fifo_drain(bi); ++ } else { ++ handled = false; ++ } ++ ++early_exit: ++ spin_unlock(&bi->lock); ++ ++ return handled ? IRQ_HANDLED : IRQ_NONE; ++} ++ ++static int bcm2708_i2c_master_xfer(struct i2c_adapter *adap, ++ struct i2c_msg *msgs, int num) ++{ ++ struct bcm2708_i2c *bi = adap->algo_data; ++ unsigned long flags; ++ int ret; ++ ++ spin_lock_irqsave(&bi->lock, flags); ++ ++ reinit_completion(&bi->done); ++ bi->msg = msgs; ++ bi->pos = 0; ++ bi->nmsgs = num; ++ bi->error = false; ++ ++ ret = bcm2708_bsc_setup(bi); ++ ++ spin_unlock_irqrestore(&bi->lock, flags); ++ ++ /* check the result of the setup */ ++ if (ret < 0) ++ { ++ dev_err(&adap->dev, "transfer setup timed out\n"); ++ goto error_timeout; ++ } ++ ++ ret = wait_for_completion_timeout(&bi->done, adap->timeout); ++ if (ret == 0) { ++ dev_err(&adap->dev, "transfer timed out\n"); ++ goto error_timeout; ++ } ++ ++ ret = bi->error ? -EIO : num; ++ return ret; ++ ++error_timeout: ++ spin_lock_irqsave(&bi->lock, flags); ++ bcm2708_bsc_reset(bi); ++ bi->msg = 0; /* to inform the interrupt handler that there's nothing else to be done */ ++ bi->nmsgs = 0; ++ spin_unlock_irqrestore(&bi->lock, flags); ++ return -ETIMEDOUT; ++} ++ ++static u32 bcm2708_i2c_functionality(struct i2c_adapter *adap) ++{ ++ return I2C_FUNC_I2C | /*I2C_FUNC_10BIT_ADDR |*/ I2C_FUNC_SMBUS_EMUL; ++} ++ ++static struct i2c_algorithm bcm2708_i2c_algorithm = { ++ .master_xfer = bcm2708_i2c_master_xfer, ++ .functionality = bcm2708_i2c_functionality, ++}; ++ ++static int bcm2708_i2c_probe(struct platform_device *pdev) ++{ ++ struct resource *regs; ++ int irq, err = -ENOMEM; ++ struct clk *clk; ++ struct bcm2708_i2c *bi; ++ struct i2c_adapter *adap; ++ unsigned long bus_hz; ++ u32 cdiv, clk_tout; ++ u32 baud; ++ ++ baud = CONFIG_I2C_BCM2708_BAUDRATE; ++ ++ if (pdev->dev.of_node) { ++ u32 bus_clk_rate; ++ pdev->id = of_alias_get_id(pdev->dev.of_node, "i2c"); ++ if (pdev->id < 0) { ++ dev_err(&pdev->dev, "alias is missing\n"); ++ return -EINVAL; ++ } ++ if (!of_property_read_u32(pdev->dev.of_node, ++ "clock-frequency", &bus_clk_rate)) ++ baud = bus_clk_rate; ++ else ++ dev_warn(&pdev->dev, ++ "Could not read clock-frequency property\n"); ++ } ++ ++ if (baudrate) ++ baud = baudrate; ++ ++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!regs) { ++ dev_err(&pdev->dev, "could not get IO memory\n"); ++ return -ENXIO; ++ } ++ ++ irq = platform_get_irq(pdev, 0); ++ if (irq < 0) { ++ dev_err(&pdev->dev, "could not get IRQ\n"); ++ return irq; ++ } ++ ++ clk = clk_get(&pdev->dev, NULL); ++ if (IS_ERR(clk)) { ++ dev_err(&pdev->dev, "could not find clk: %ld\n", PTR_ERR(clk)); ++ return PTR_ERR(clk); ++ } ++ ++ err = clk_prepare_enable(clk); ++ if (err) { ++ dev_err(&pdev->dev, "could not enable clk: %d\n", err); ++ goto out_clk_put; ++ } ++ ++ bi = kzalloc(sizeof(*bi), GFP_KERNEL); ++ if (!bi) ++ goto out_clk_disable; ++ ++ platform_set_drvdata(pdev, bi); ++ ++ adap = &bi->adapter; ++ adap->class = I2C_CLASS_HWMON | I2C_CLASS_DDC; ++ adap->algo = &bcm2708_i2c_algorithm; ++ adap->algo_data = bi; ++ adap->dev.parent = &pdev->dev; ++ adap->nr = pdev->id; ++ strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name)); ++ adap->dev.of_node = pdev->dev.of_node; ++ ++ switch (pdev->id) { ++ case 0: ++ adap->class = I2C_CLASS_HWMON; ++ break; ++ case 1: ++ adap->class = I2C_CLASS_DDC; ++ break; ++ case 2: ++ adap->class = I2C_CLASS_DDC; ++ break; ++ default: ++ dev_err(&pdev->dev, "can only bind to BSC 0, 1 or 2\n"); ++ err = -ENXIO; ++ goto out_free_bi; ++ } ++ ++ spin_lock_init(&bi->lock); ++ init_completion(&bi->done); ++ ++ bi->base = ioremap(regs->start, resource_size(regs)); ++ if (!bi->base) { ++ dev_err(&pdev->dev, "could not remap memory\n"); ++ goto out_free_bi; ++ } ++ ++ bi->irq = irq; ++ bi->clk = clk; ++ ++ err = request_irq(irq, bcm2708_i2c_interrupt, IRQF_SHARED, ++ dev_name(&pdev->dev), bi); ++ if (err) { ++ dev_err(&pdev->dev, "could not request IRQ: %d\n", err); ++ goto out_iounmap; ++ } ++ ++ bcm2708_bsc_reset(bi); ++ ++ err = i2c_add_numbered_adapter(adap); ++ if (err < 0) { ++ dev_err(&pdev->dev, "could not add I2C adapter: %d\n", err); ++ goto out_free_irq; ++ } ++ ++ bus_hz = clk_get_rate(bi->clk); ++ cdiv = bus_hz / baud; ++ if (cdiv > 0xffff) { ++ cdiv = 0xffff; ++ baud = bus_hz / cdiv; ++ } ++ ++ clk_tout = 35/1000*baud; //35ms timeout as per SMBus specs. ++ if (clk_tout > 0xffff) ++ clk_tout = 0xffff; ++ ++ bi->cdiv = cdiv; ++ bi->clk_tout = clk_tout; ++ ++ dev_info(&pdev->dev, "BSC%d Controller at 0x%08lx (irq %d) (baudrate %d)\n", ++ pdev->id, (unsigned long)regs->start, irq, baud); ++ ++ return 0; ++ ++out_free_irq: ++ free_irq(bi->irq, bi); ++out_iounmap: ++ iounmap(bi->base); ++out_free_bi: ++ kfree(bi); ++out_clk_disable: ++ clk_disable_unprepare(clk); ++out_clk_put: ++ clk_put(clk); ++ return err; ++} ++ ++static int bcm2708_i2c_remove(struct platform_device *pdev) ++{ ++ struct bcm2708_i2c *bi = platform_get_drvdata(pdev); ++ ++ platform_set_drvdata(pdev, NULL); ++ ++ i2c_del_adapter(&bi->adapter); ++ free_irq(bi->irq, bi); ++ iounmap(bi->base); ++ clk_disable_unprepare(bi->clk); ++ clk_put(bi->clk); ++ kfree(bi); ++ ++ return 0; ++} ++ ++static const struct of_device_id bcm2708_i2c_of_match[] = { ++ { .compatible = "brcm,bcm2708-i2c" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, bcm2708_i2c_of_match); ++ ++static struct platform_driver bcm2708_i2c_driver = { ++ .driver = { ++ .name = DRV_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = bcm2708_i2c_of_match, ++ }, ++ .probe = bcm2708_i2c_probe, ++ .remove = bcm2708_i2c_remove, ++}; ++ ++// module_platform_driver(bcm2708_i2c_driver); ++ ++ ++static int __init bcm2708_i2c_init(void) ++{ ++ return platform_driver_register(&bcm2708_i2c_driver); ++} ++ ++static void __exit bcm2708_i2c_exit(void) ++{ ++ platform_driver_unregister(&bcm2708_i2c_driver); ++} ++ ++module_init(bcm2708_i2c_init); ++module_exit(bcm2708_i2c_exit); ++ ++ ++ ++MODULE_DESCRIPTION("BSC controller driver for Broadcom BCM2708"); ++MODULE_AUTHOR("Chris Boot "); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:" DRV_NAME); diff --git a/target/linux/brcm2708/patches-4.9/950-0049-char-broadcom-Add-vcio-module.patch b/target/linux/brcm2708/patches-4.9/950-0049-char-broadcom-Add-vcio-module.patch new file mode 100644 index 000000000000..c37c0f613372 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0049-char-broadcom-Add-vcio-module.patch @@ -0,0 +1,221 @@ +From 2e8101a5e6228109d2cd5b965b6077e63e643d6b Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= +Date: Fri, 26 Jun 2015 14:27:06 +0200 +Subject: [PATCH] char: broadcom: Add vcio module +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add module for accessing the mailbox property channel through +/dev/vcio. Was previously in bcm2708-vcio. + +Signed-off-by: Noralf Trønnes +--- + drivers/char/broadcom/Kconfig | 6 ++ + drivers/char/broadcom/Makefile | 1 + + drivers/char/broadcom/vcio.c | 175 +++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 182 insertions(+) + create mode 100644 drivers/char/broadcom/vcio.c + +--- a/drivers/char/broadcom/Kconfig ++++ b/drivers/char/broadcom/Kconfig +@@ -22,6 +22,12 @@ config BCM2708_VCMEM + help + Helper for videocore memory access and total size allocation. + ++config BCM_VCIO ++ tristate "Mailbox userspace access" ++ depends on BCM2835_MBOX ++ help ++ Gives access to the mailbox property channel from userspace. ++ + endif + + config BCM_VC_SM +--- a/drivers/char/broadcom/Makefile ++++ b/drivers/char/broadcom/Makefile +@@ -1,5 +1,6 @@ + obj-$(CONFIG_BCM_VC_CMA) += vc_cma/ + obj-$(CONFIG_BCM2708_VCMEM) += vc_mem.o ++obj-$(CONFIG_BCM_VCIO) += vcio.o + obj-$(CONFIG_BCM_VC_SM) += vc_sm/ + + obj-$(CONFIG_BCM2835_DEVGPIOMEM)+= bcm2835-gpiomem.o +--- /dev/null ++++ b/drivers/char/broadcom/vcio.c +@@ -0,0 +1,175 @@ ++/* ++ * Copyright (C) 2010 Broadcom ++ * Copyright (C) 2015 Noralf Trønnes ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define MBOX_CHAN_PROPERTY 8 ++ ++#define VCIO_IOC_MAGIC 100 ++#define IOCTL_MBOX_PROPERTY _IOWR(VCIO_IOC_MAGIC, 0, char *) ++ ++static struct { ++ dev_t devt; ++ struct cdev cdev; ++ struct class *class; ++ struct rpi_firmware *fw; ++} vcio; ++ ++static int vcio_user_property_list(void *user) ++{ ++ u32 *buf, size; ++ int ret; ++ ++ /* The first 32-bit is the size of the buffer */ ++ if (copy_from_user(&size, user, sizeof(size))) ++ return -EFAULT; ++ ++ buf = kmalloc(size, GFP_KERNEL); ++ if (!buf) ++ return -ENOMEM; ++ ++ if (copy_from_user(buf, user, size)) { ++ kfree(buf); ++ return -EFAULT; ++ } ++ ++ /* Strip off protocol encapsulation */ ++ ret = rpi_firmware_property_list(vcio.fw, &buf[2], size - 12); ++ if (ret) { ++ kfree(buf); ++ return ret; ++ } ++ ++ buf[1] = RPI_FIRMWARE_STATUS_SUCCESS; ++ if (copy_to_user(user, buf, size)) ++ ret = -EFAULT; ++ ++ kfree(buf); ++ ++ return ret; ++} ++ ++static int vcio_device_open(struct inode *inode, struct file *file) ++{ ++ try_module_get(THIS_MODULE); ++ ++ return 0; ++} ++ ++static int vcio_device_release(struct inode *inode, struct file *file) ++{ ++ module_put(THIS_MODULE); ++ ++ return 0; ++} ++ ++static long vcio_device_ioctl(struct file *file, unsigned int ioctl_num, ++ unsigned long ioctl_param) ++{ ++ switch (ioctl_num) { ++ case IOCTL_MBOX_PROPERTY: ++ return vcio_user_property_list((void *)ioctl_param); ++ default: ++ pr_err("unknown ioctl: %d\n", ioctl_num); ++ return -EINVAL; ++ } ++} ++ ++const struct file_operations vcio_fops = { ++ .unlocked_ioctl = vcio_device_ioctl, ++ .open = vcio_device_open, ++ .release = vcio_device_release, ++}; ++ ++static int __init vcio_init(void) ++{ ++ struct device_node *np; ++ static struct device *dev; ++ int ret; ++ ++ np = of_find_compatible_node(NULL, NULL, ++ "raspberrypi,bcm2835-firmware"); ++/* Uncomment this when we only boot with Device Tree ++ if (!of_device_is_available(np)) ++ return -ENODEV; ++*/ ++ vcio.fw = rpi_firmware_get(np); ++ if (!vcio.fw) ++ return -ENODEV; ++ ++ ret = alloc_chrdev_region(&vcio.devt, 0, 1, "vcio"); ++ if (ret) { ++ pr_err("failed to allocate device number\n"); ++ return ret; ++ } ++ ++ cdev_init(&vcio.cdev, &vcio_fops); ++ vcio.cdev.owner = THIS_MODULE; ++ ret = cdev_add(&vcio.cdev, vcio.devt, 1); ++ if (ret) { ++ pr_err("failed to register device\n"); ++ goto err_unregister_chardev; ++ } ++ ++ /* ++ * Create sysfs entries ++ * 'bcm2708_vcio' is used for backwards compatibility so we don't break ++ * userspace. Raspian has a udev rule that changes the permissions. ++ */ ++ vcio.class = class_create(THIS_MODULE, "bcm2708_vcio"); ++ if (IS_ERR(vcio.class)) { ++ ret = PTR_ERR(vcio.class); ++ pr_err("failed to create class\n"); ++ goto err_cdev_del; ++ } ++ ++ dev = device_create(vcio.class, NULL, vcio.devt, NULL, "vcio"); ++ if (IS_ERR(dev)) { ++ ret = PTR_ERR(dev); ++ pr_err("failed to create device\n"); ++ goto err_class_destroy; ++ } ++ ++ return 0; ++ ++err_class_destroy: ++ class_destroy(vcio.class); ++err_cdev_del: ++ cdev_del(&vcio.cdev); ++err_unregister_chardev: ++ unregister_chrdev_region(vcio.devt, 1); ++ ++ return ret; ++} ++module_init(vcio_init); ++ ++static void __exit vcio_exit(void) ++{ ++ device_destroy(vcio.class, vcio.devt); ++ class_destroy(vcio.class); ++ cdev_del(&vcio.cdev); ++ unregister_chrdev_region(vcio.devt, 1); ++} ++module_exit(vcio_exit); ++ ++MODULE_AUTHOR("Gray Girling"); ++MODULE_AUTHOR("Noralf Trønnes"); ++MODULE_DESCRIPTION("Mailbox userspace access"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/brcm2708/patches-4.9/950-0050-firmware-bcm2835-Support-ARCH_BCM270x.patch b/target/linux/brcm2708/patches-4.9/950-0050-firmware-bcm2835-Support-ARCH_BCM270x.patch new file mode 100644 index 000000000000..ecaf614c16bd --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0050-firmware-bcm2835-Support-ARCH_BCM270x.patch @@ -0,0 +1,83 @@ +From f281fd683848cd432f7b73c869676be6362ce1b8 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= +Date: Fri, 26 Jun 2015 14:25:01 +0200 +Subject: [PATCH] firmware: bcm2835: Support ARCH_BCM270x +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Support booting without Device Tree. +Turn on USB power. +Load driver early because of lacking support for deferred probing +in many drivers. + +Signed-off-by: Noralf Trønnes + +firmware: bcm2835: Don't turn on USB power + +The raspberrypi-power driver is now used to turn on USB power. + +This partly reverts commit: +firmware: bcm2835: Support ARCH_BCM270x + +Signed-off-by: Noralf Trønnes +--- + drivers/firmware/raspberrypi.c | 19 +++++++++++++++++-- + 1 file changed, 17 insertions(+), 2 deletions(-) + +--- a/drivers/firmware/raspberrypi.c ++++ b/drivers/firmware/raspberrypi.c +@@ -28,6 +28,8 @@ struct rpi_firmware { + u32 enabled; + }; + ++static struct platform_device *g_pdev; ++ + static DEFINE_MUTEX(transaction_lock); + + static void response_callback(struct mbox_client *cl, void *msg) +@@ -207,6 +209,7 @@ static int rpi_firmware_probe(struct pla + init_completion(&fw->c); + + platform_set_drvdata(pdev, fw); ++ g_pdev = pdev; + + rpi_firmware_print_firmware_revision(fw); + +@@ -218,6 +221,7 @@ static int rpi_firmware_remove(struct pl + struct rpi_firmware *fw = platform_get_drvdata(pdev); + + mbox_free_channel(fw->chan); ++ g_pdev = NULL; + + return 0; + } +@@ -230,7 +234,7 @@ static int rpi_firmware_remove(struct pl + */ + struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node) + { +- struct platform_device *pdev = of_find_device_by_node(firmware_node); ++ struct platform_device *pdev = g_pdev; + + if (!pdev) + return NULL; +@@ -253,7 +257,18 @@ static struct platform_driver rpi_firmwa + .probe = rpi_firmware_probe, + .remove = rpi_firmware_remove, + }; +-module_platform_driver(rpi_firmware_driver); ++ ++static int __init rpi_firmware_init(void) ++{ ++ return platform_driver_register(&rpi_firmware_driver); ++} ++subsys_initcall(rpi_firmware_init); ++ ++static void __init rpi_firmware_exit(void) ++{ ++ platform_driver_unregister(&rpi_firmware_driver); ++} ++module_exit(rpi_firmware_exit); + + MODULE_AUTHOR("Eric Anholt "); + MODULE_DESCRIPTION("Raspberry Pi firmware driver"); diff --git a/target/linux/brcm2708/patches-4.9/950-0051-bcm2835-add-v4l2-camera-device.patch b/target/linux/brcm2708/patches-4.9/950-0051-bcm2835-add-v4l2-camera-device.patch new file mode 100644 index 000000000000..e6baeabfd307 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0051-bcm2835-add-v4l2-camera-device.patch @@ -0,0 +1,7695 @@ +From 88f7fe5348a24191969b07537b38449a83369d32 Mon Sep 17 00:00:00 2001 +From: Vincent Sanders +Date: Wed, 30 Jan 2013 12:45:18 +0000 +Subject: [PATCH] bcm2835: add v4l2 camera device + +- Supports raw YUV capture, preview, JPEG and H264. +- Uses videobuf2 for data transfer, using dma_buf. +- Uses 3.6.10 timestamping +- Camera power based on use +- Uses immutable input mode on video encoder + +Signed-off-by: Daniel Stone +Signed-off-by: Luke Diamand + +V4L2: Fixes from 6by9 + +V4L2: Fix EV values. Add manual shutter speed control + +V4L2 EV values should be in units of 1/1000. Corrected. +Add support for V4L2_CID_EXPOSURE_ABSOLUTE which should +give manual shutter control. Requires manual exposure mode +to be selected first. + +Signed-off-by: Dave Stevenson + +V4L2: Correct JPEG Q-factor range + +Should be 1-100, not 0-100 + +Signed-off-by: Dave Stevenson + +V4L2: Fix issue of driver jamming if STREAMON failed. + +Fix issue where the driver was left in a partially enabled +state if STREAMON failed, and would then reject many IOCTLs +as it thought it was streaming. + +Signed-off-by: Dave Stevenson + +V4L2: Fix ISO controls. + +Driver was passing the index to the GPU, and not the desired +ISO value. + +Signed-off-by: Dave Stevenson + +V4L2: Add flicker avoidance controls + +Add support for V4L2_CID_POWER_LINE_FREQUENCY to set flicker +avoidance frequencies. + +Signed-off-by: Dave Stevenson + +V4L2: Add support for frame rate control. + +Add support for frame rate (or time per frame as V4L2 +inverts it) control via s_parm. + +Signed-off-by: Dave Stevenson + +V4L2: Improve G_FBUF handling so we pass conformance + +Return some sane numbers for get framebuffer so that +we pass conformance. + +Signed-off-by: Dave Stevenson + +V4L2: Fix information advertised through g_vidfmt + +Width and height were being stored based on incorrect +values. + +Signed-off-by: Dave Stevenson + +V4L2: Add support for inline H264 headers + +Add support for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER +to control H264 inline headers. +Requires firmware fix to work correctly, otherwise format +has to be set to H264 before this parameter is set. + +Signed-off-by: Dave Stevenson + +V4L2: Fix JPEG timestamp issue + +JPEG images were coming through from the GPU with timestamp +of 0. Detect this and give current system time instead +of some invalid value. + +Signed-off-by: Dave Stevenson + +V4L2: Fix issue when switching down JPEG resolution. + +JPEG buffer size calculation is based on input resolution. +Input resolution was being configured after output port +format. Caused failures if switching from one JPEG resolution +to a smaller one. + +Signed-off-by: Dave Stevenson + +V4L2: Enable MJPEG encoding + +Requires GPU firmware update to support MJPEG encoder. + +Signed-off-by: Dave Stevenson + +V4L2: Correct flag settings for compressed formats + +Set flags field correctly on enum_fmt_vid_cap for compressed +image formats. + +Signed-off-by: Dave Stevenson + +V4L2: H264 profile & level ctrls, FPS control and auto exp pri + +Several control handling updates. +H264 profile and level controls. +Timeperframe/FPS reworked to add V4L2_CID_EXPOSURE_AUTO_PRIORITY to +select whether AE is allowed to override the framerate specified. + +Signed-off-by: Dave Stevenson + +V4L2: Correct BGR24 to RGB24 in format table + +Signed-off-by: Dave Stevenson + +V4L2: Add additional pixel formats. Correct colourspace + +Adds the other flavours of YUYV, and NV12. +Corrects the overlay advertised colourspace. + +Signed-off-by: Dave Stevenson + +V4L2: Drop logging msg from info to debug + +Signed-off-by: Dave Stevenson + +V4L2: Initial pass at scene modes. + +Only supports exposure mode and metering modes. + +Signed-off-by: Dave Stevenson + +V4L2: Add manual white balance control. + +Adds support for V4L2_CID_RED_BALANCE and +V4L2_CID_BLUE_BALANCE. Only has an effect if +V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE has +V4L2_WHITE_BALANCE_MANUAL selected. + +Signed-off-by: Dave Stevenson + +config: Enable V4L / MMAL driver + +V4L2: Increase the MMAL timeout to 3sec + +MJPEG codec flush is now taking longer and results +in a kernel panic if the driver has stopped waiting for +the result when it finally completes. +Increase the timeout value from 1 to 3secs. + +Signed-off-by: Dave Stevenson + +V4L2: Add support for setting H264_I_PERIOD + +Adds support for the parameter V4L2_CID_MPEG_VIDEO_H264_I_PERIOD +to set the frequency with which I frames are produced. + +Signed-off-by: Dave Stevenson + +V4L2: Enable GPU function for removing padding from images. + +GPU can now support arbitrary strides, although may require +additional processing to achieve it. Enable this feature +so that the images delivered are the size requested. + +Signed-off-by: Dave Stevenson + +V4L2: Add support for V4L2_PIX_FMT_BGR32 + +Signed-off-by: Dave Stevenson + +V4L2: Set the colourspace to avoid odd YUV-RGB conversions + +Removes the amiguity from the conversion routines and stops +them dropping back to the SD vs HD choice of coeffs. + +Signed-off-by: Dave Stevenson + +V4L2: Make video/still threshold a run-time param + +Move the define for at what resolution the driver +switches from a video mode capture to a stills mode +capture to module parameters. + +Signed-off-by: Dave Stevenson + +V4L2: Fix incorrect pool sizing + +Signed-off-by: Dave Stevenson + +V4L2: Add option to disable enum_framesizes. + +Gstreamer's handling of a driver that advertises +V4L2_FRMSIZE_TYPE_STEPWISE to define the supported +resolutions is broken. See bug +https://bugzilla.gnome.org/show_bug.cgi?id=726521 + +Optional parameter of gst_v4l2src_is_broken added. +If non-zero, the driver claims not to support that +ioctl, and gstreamer should be happy again (it +guesses a set of defaults for itself). + +Signed-off-by: Dave Stevenson + +V4L2: Add support for more image formats + +Adds YVU420 (YV12), YVU420SP (NV21), and BGR888. + +Signed-off-by: Dave Stevenson + +V4L2: Extend range for V4L2_CID_MPEG_VIDEO_H264_I_PERIOD + +Request to extend the range from the fairly arbitrary +1000 frames (33 seconds at 30fps). Extend out to the +max range supported (int32 value). +Also allow 0, which is handled by the codec as only +send an I-frame on the first frame and never again. +There may be an exception if it detects a significant +scene change, but there's no easy way around that. + +Signed-off-by: Dave Stevenson + +bcm2835-camera: stop_streaming now has a void return + +BCM2835-V4L2: Fix compliance test failures + +VIDIOC_TRY_FMT and VIDIOC_S_FMT tests were faling due +to reporting V4L2_COLORSPACE_JPEG when the colour +format wasn't V4L2_PIX_FMT_JPEG. +Now reports V4L2_COLORSPACE_SMPTE170M for YUV formats. + +bcm2835 camera planar/packed stride length + +Added a field to the mmal_fmt struct used to compute the bytes per line +when using a particular format. This results in the correct stride being +calculated even when the format is planar. + +Signed-off-by: Garrett Wilson + +bcm2835: camera: check for scene not being found + +static analysis by cppcheck detected some potential NULL pointer +dereference issues: + +[drivers/media/platform/bcm2835/controls.c:854]: (error) Possible null + pointer dereference: scene + (and lines 858, 859 too) + +it is possible that scene is not found because of an invalue ctrl->val +and is therefore NULL and hence causing a null pointer dereference. + +Signed-off-by: Colin Ian King + +bcm2835: memcpy port data to m rather than rmsg + +static analysis by cppcheck detected a memcpy to rmsg which is +not actually initialized at that point. The memcpy should be copying +to variable m instead. + +Signed-off-by: Colin Ian King + +BCM2835-V4L2: Return buffers to videobuf2 on shutdown + +https://github.com/raspberrypi/linux/issues/817 +Fixes the kernel warning from videobuf2 as buffers +are now returned as they are being flushed on +stop_streaming. + +squash: Fixup bcm2835-camera for changes in kernel 4.4 api + +v4l2: Fix up driver to upstream timestamp changes + +bcm2835-camera: fix a bug in computation of frame timestamp + +Fixes #1318 + +V4L2 driver updates (#1393) + +* BCM2835-V4L2: Correct ISO control and add V4L2_CID_ISO_SENSITIVITY_AUTO + +https://github.com/raspberrypi/linux/issues/1251 + +V4L2_CID_ISO_SENSITIVITY was not advertising ISO*1000 as it should. +V4L2_CID_ISO_SENSITIVITY_AUTO was not implemented, so was taking +V4L2_CID_ISO_SENSITIVITY as 0 for auto mode. +Still accepts 0 for auto, but also abides by the new parameter. + +Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + +* BCM2835-V4L2: Add a video_nr parameter. + +Adds a kernel parameter "video_nr" to specify the preferred +/dev/videoX device node. +https://www.raspberrypi.org/forums/viewtopic.php?f=38&t=136120&p=905545 + +Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + +* BCM2835-V4L2: Add support for multiple cameras + +Ask GPU on load how many cameras have been detected, and +enumerate that number of devices. +Only applicable on the Compute Module as no other device +exposes multiple CSI2 interfaces. + +Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + +* BCM2835-V4L2: Add control of the overlay location and alpha. + +Actually do something useful in vidioc_s_fmt_vid_overlay and +vidioc_try_fmt_vid_overlay, rather than effectively having +read-only fields. + +Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + +* BCM2835-V4L2: V4L2-Compliance failure fix + +VIDIOC_TRY_FMT was failing due to bytesperline not +being set correctly by default. + +Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + +* BCM2835-V4L2: Make all module parameters static + +Clean up to correct variable scope + +Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + +V4L2: Request maximum resolution from GPU + +Get resolution information about the sensors from the GPU +and advertise it correctly. + +Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + +BCM2835-V4L2: Increase minimum resolution to 32x32 + +https://github.com/raspberrypi/linux/issues/1498 showed +up that 16x16 is failing to work on the GPU for some reason. + +GPU bug being tracked on +https://github.com/raspberrypi/firmware/issues/607 +Workaround here by increasing minimum resolution via V4L2 +to 32x32. + +Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + +[media]: bcm2835-camera: fix compilation error + +There is an error when compiling rpi-4.6.y branch: + CC [M] drivers/media/platform/bcm2835/bcm2835-camera.o +drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] + .queue_setup = queue_setup, + ^ +drivers/media/platform/bcm2835/bcm2835-camera.c:639:17: note: (near initialization for 'bm2835_mmal_video_qops.queue_setup') + +The const void *parg in setup_queue callback is not needed since commit: +df9ecb0cad14b952a2865f8b3af86b2bbadfab45. +This commit removes it. + +Signed-off-by: Slawomir Stepien + +bcm2835-camera: Fix max/min error when looping over cameras/resolutions + +See: https://github.com/raspberrypi/linux/issues/1447#issuecomment-221303506 + +BCM2835-V4L2: Correct handling for BGR24 vs RGB24. + +There was a bug in the GPU firmware that had reversed these +two formats. +Detect the old firmware, and reverse the formats if necessary. + +Signed-off-by: Dave Stevenson <6by9@users.noreply.github.com> + +BCM2835-v4l2: Fix a conformance test failure + +Format ioctls: + test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK + warn: v4l2-test-formats.cpp(1195): S_PARM is supported but + doesn't report V4L2_CAP_TIMEPERFRAME. + fail: v4l2-test-formats.cpp(1118): node->has_frmintervals + && !cap->capability +--- + Documentation/video4linux/bcm2835-v4l2.txt | 60 + + drivers/media/platform/Kconfig | 2 + + drivers/media/platform/Makefile | 2 + + drivers/media/platform/bcm2835/Kconfig | 25 + + drivers/media/platform/bcm2835/Makefile | 5 + + drivers/media/platform/bcm2835/bcm2835-camera.c | 2016 ++++++++++++++++++++++ + drivers/media/platform/bcm2835/bcm2835-camera.h | 145 ++ + drivers/media/platform/bcm2835/controls.c | 1345 +++++++++++++++ + drivers/media/platform/bcm2835/mmal-common.h | 53 + + drivers/media/platform/bcm2835/mmal-encodings.h | 127 ++ + drivers/media/platform/bcm2835/mmal-msg-common.h | 50 + + drivers/media/platform/bcm2835/mmal-msg-format.h | 81 + + drivers/media/platform/bcm2835/mmal-msg-port.h | 107 ++ + drivers/media/platform/bcm2835/mmal-msg.h | 404 +++++ + drivers/media/platform/bcm2835/mmal-parameters.h | 689 ++++++++ + drivers/media/platform/bcm2835/mmal-vchiq.c | 1916 ++++++++++++++++++++ + drivers/media/platform/bcm2835/mmal-vchiq.h | 178 ++ + 17 files changed, 7205 insertions(+) + create mode 100644 Documentation/video4linux/bcm2835-v4l2.txt + create mode 100644 drivers/media/platform/bcm2835/Kconfig + create mode 100644 drivers/media/platform/bcm2835/Makefile + create mode 100644 drivers/media/platform/bcm2835/bcm2835-camera.c + create mode 100644 drivers/media/platform/bcm2835/bcm2835-camera.h + create mode 100644 drivers/media/platform/bcm2835/controls.c + create mode 100644 drivers/media/platform/bcm2835/mmal-common.h + create mode 100644 drivers/media/platform/bcm2835/mmal-encodings.h + create mode 100644 drivers/media/platform/bcm2835/mmal-msg-common.h + create mode 100644 drivers/media/platform/bcm2835/mmal-msg-format.h + create mode 100644 drivers/media/platform/bcm2835/mmal-msg-port.h + create mode 100644 drivers/media/platform/bcm2835/mmal-msg.h + create mode 100644 drivers/media/platform/bcm2835/mmal-parameters.h + create mode 100644 drivers/media/platform/bcm2835/mmal-vchiq.c + create mode 100644 drivers/media/platform/bcm2835/mmal-vchiq.h + +--- /dev/null ++++ b/Documentation/video4linux/bcm2835-v4l2.txt +@@ -0,0 +1,60 @@ ++ ++BCM2835 (aka Raspberry Pi) V4L2 driver ++====================================== ++ ++1. Copyright ++============ ++ ++Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ ++2. License ++========== ++ ++This program is free software; you can redistribute it and/or modify ++it under the terms of the GNU General Public License as published by ++the Free Software Foundation; either version 2 of the License, or ++(at your option) any later version. ++ ++This program is distributed in the hope that it will be useful, ++but WITHOUT ANY WARRANTY; without even the implied warranty of ++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++GNU General Public License for more details. ++ ++You should have received a copy of the GNU General Public License ++along with this program; if not, write to the Free Software ++Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ ++3. Quick Start ++============== ++ ++You need a version 1.0 or later of v4l2-ctl, available from: ++ git://git.linuxtv.org/v4l-utils.git ++ ++$ sudo modprobe bcm2835-v4l2 ++ ++Turn on the overlay: ++ ++$ v4l2-ctl --overlay=1 ++ ++Turn off the overlay: ++ ++$ v4l2-ctl --overlay=0 ++ ++Set the capture format for video: ++ ++$ v4l2-ctl --set-fmt-video=width=1920,height=1088,pixelformat=4 ++ ++(Note: 1088 not 1080). ++ ++Capture: ++ ++$ v4l2-ctl --stream-mmap=3 --stream-count=100 --stream-to=somefile.h264 ++ ++Stills capture: ++ ++$ v4l2-ctl --set-fmt-video=width=2592,height=1944,pixelformat=3 ++$ v4l2-ctl --stream-mmap=3 --stream-count=1 --stream-to=somefile.jpg ++ ++List of available formats: ++ ++$ v4l2-ctl --list-formats +--- a/drivers/media/platform/Kconfig ++++ b/drivers/media/platform/Kconfig +@@ -11,6 +11,8 @@ menuconfig V4L_PLATFORM_DRIVERS + + if V4L_PLATFORM_DRIVERS + ++source "drivers/media/platform/bcm2835/Kconfig" ++ + source "drivers/media/platform/marvell-ccic/Kconfig" + + config VIDEO_VIA_CAMERA +--- a/drivers/media/platform/Makefile ++++ b/drivers/media/platform/Makefile +@@ -2,6 +2,8 @@ + # Makefile for the video capture/playback device drivers. + # + ++obj-$(CONFIG_VIDEO_BCM2835) += bcm2835/ ++ + obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o + + obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o +--- /dev/null ++++ b/drivers/media/platform/bcm2835/Kconfig +@@ -0,0 +1,25 @@ ++# Broadcom VideoCore IV v4l2 camera support ++ ++config VIDEO_BCM2835 ++ bool "Broadcom BCM2835 camera interface driver" ++ depends on VIDEO_V4L2 && ARCH_BCM2835 ++ ---help--- ++ Say Y here to enable camera host interface devices for ++ Broadcom BCM2835 SoC. This operates over the VCHIQ interface ++ to a service running on VideoCore. ++ ++ ++if VIDEO_BCM2835 ++ ++config VIDEO_BCM2835_MMAL ++ tristate "Broadcom BM2835 MMAL camera interface driver" ++ depends on BCM2708_VCHIQ ++ select VIDEOBUF2_VMALLOC ++ ---help--- ++ This is a V4L2 driver for the Broadcom BCM2835 MMAL camera host interface ++ ++ To compile this driver as a module, choose M here: the ++ module will be called bcm2835-v4l2.o ++ ++ ++endif # VIDEO_BM2835 +--- /dev/null ++++ b/drivers/media/platform/bcm2835/Makefile +@@ -0,0 +1,5 @@ ++bcm2835-v4l2-objs := bcm2835-camera.o controls.o mmal-vchiq.o ++ ++obj-$(CONFIG_VIDEO_BCM2835_MMAL) += bcm2835-v4l2.o ++ ++ccflags-$(CONFIG_VIDEO_BCM2835) += -Idrivers/staging/vc04_services -Idrivers/staging/vc04_services/interface/vcos/linuxkernel -D__VCCOREVER__=0x04000000 +--- /dev/null ++++ b/drivers/media/platform/bcm2835/bcm2835-camera.c +@@ -0,0 +1,2016 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "mmal-common.h" ++#include "mmal-encodings.h" ++#include "mmal-vchiq.h" ++#include "mmal-msg.h" ++#include "mmal-parameters.h" ++#include "bcm2835-camera.h" ++ ++#define BM2835_MMAL_VERSION "0.0.2" ++#define BM2835_MMAL_MODULE_NAME "bcm2835-v4l2" ++#define MIN_WIDTH 32 ++#define MIN_HEIGHT 32 ++#define MIN_BUFFER_SIZE (80*1024) ++ ++#define MAX_VIDEO_MODE_WIDTH 1280 ++#define MAX_VIDEO_MODE_HEIGHT 720 ++ ++#define MAX_BCM2835_CAMERAS 2 ++ ++MODULE_DESCRIPTION("Broadcom 2835 MMAL video capture"); ++MODULE_AUTHOR("Vincent Sanders"); ++MODULE_LICENSE("GPL"); ++MODULE_VERSION(BM2835_MMAL_VERSION); ++ ++int bcm2835_v4l2_debug; ++module_param_named(debug, bcm2835_v4l2_debug, int, 0644); ++MODULE_PARM_DESC(bcm2835_v4l2_debug, "Debug level 0-2"); ++ ++#define UNSET (-1) ++static int video_nr[] = {[0 ... (MAX_BCM2835_CAMERAS - 1)] = UNSET }; ++module_param_array(video_nr, int, NULL, 0644); ++MODULE_PARM_DESC(video_nr, "videoX start numbers, -1 is autodetect"); ++ ++static int max_video_width = MAX_VIDEO_MODE_WIDTH; ++static int max_video_height = MAX_VIDEO_MODE_HEIGHT; ++module_param(max_video_width, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH); ++MODULE_PARM_DESC(max_video_width, "Threshold for video mode"); ++module_param(max_video_height, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH); ++MODULE_PARM_DESC(max_video_height, "Threshold for video mode"); ++ ++/* Gstreamer bug https://bugzilla.gnome.org/show_bug.cgi?id=726521 ++ * v4l2src does bad (and actually wrong) things when the vidioc_enum_framesizes ++ * function says type V4L2_FRMSIZE_TYPE_STEPWISE, which we do by default. ++ * It's happier if we just don't say anything at all, when it then ++ * sets up a load of defaults that it thinks might work. ++ * If gst_v4l2src_is_broken is non-zero, then we remove the function from ++ * our function table list (actually switch to an alternate set, but same ++ * result). ++ */ ++static int gst_v4l2src_is_broken; ++module_param(gst_v4l2src_is_broken, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH); ++MODULE_PARM_DESC(gst_v4l2src_is_broken, "If non-zero, enable workaround for Gstreamer"); ++ ++/* global device data array */ ++static struct bm2835_mmal_dev *gdev[MAX_BCM2835_CAMERAS]; ++ ++#define FPS_MIN 1 ++#define FPS_MAX 90 ++ ++/* timeperframe: min/max and default */ ++static const struct v4l2_fract ++ tpf_min = {.numerator = 1, .denominator = FPS_MAX}, ++ tpf_max = {.numerator = 1, .denominator = FPS_MIN}, ++ tpf_default = {.numerator = 1000, .denominator = 30000}; ++ ++/* video formats */ ++static struct mmal_fmt formats[] = { ++ { ++ .name = "4:2:0, planar, YUV", ++ .fourcc = V4L2_PIX_FMT_YUV420, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_I420, ++ .depth = 12, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 1, ++ }, ++ { ++ .name = "4:2:2, packed, YUYV", ++ .fourcc = V4L2_PIX_FMT_YUYV, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_YUYV, ++ .depth = 16, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 2, ++ }, ++ { ++ .name = "RGB24 (LE)", ++ .fourcc = V4L2_PIX_FMT_RGB24, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_RGB24, ++ .depth = 24, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 3, ++ }, ++ { ++ .name = "JPEG", ++ .fourcc = V4L2_PIX_FMT_JPEG, ++ .flags = V4L2_FMT_FLAG_COMPRESSED, ++ .mmal = MMAL_ENCODING_JPEG, ++ .depth = 8, ++ .mmal_component = MMAL_COMPONENT_IMAGE_ENCODE, ++ .ybbp = 0, ++ }, ++ { ++ .name = "H264", ++ .fourcc = V4L2_PIX_FMT_H264, ++ .flags = V4L2_FMT_FLAG_COMPRESSED, ++ .mmal = MMAL_ENCODING_H264, ++ .depth = 8, ++ .mmal_component = MMAL_COMPONENT_VIDEO_ENCODE, ++ .ybbp = 0, ++ }, ++ { ++ .name = "MJPEG", ++ .fourcc = V4L2_PIX_FMT_MJPEG, ++ .flags = V4L2_FMT_FLAG_COMPRESSED, ++ .mmal = MMAL_ENCODING_MJPEG, ++ .depth = 8, ++ .mmal_component = MMAL_COMPONENT_VIDEO_ENCODE, ++ .ybbp = 0, ++ }, ++ { ++ .name = "4:2:2, packed, YVYU", ++ .fourcc = V4L2_PIX_FMT_YVYU, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_YVYU, ++ .depth = 16, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 2, ++ }, ++ { ++ .name = "4:2:2, packed, VYUY", ++ .fourcc = V4L2_PIX_FMT_VYUY, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_VYUY, ++ .depth = 16, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 2, ++ }, ++ { ++ .name = "4:2:2, packed, UYVY", ++ .fourcc = V4L2_PIX_FMT_UYVY, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_UYVY, ++ .depth = 16, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 2, ++ }, ++ { ++ .name = "4:2:0, planar, NV12", ++ .fourcc = V4L2_PIX_FMT_NV12, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_NV12, ++ .depth = 12, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 1, ++ }, ++ { ++ .name = "RGB24 (BE)", ++ .fourcc = V4L2_PIX_FMT_BGR24, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_BGR24, ++ .depth = 24, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 3, ++ }, ++ { ++ .name = "4:2:0, planar, YVU", ++ .fourcc = V4L2_PIX_FMT_YVU420, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_YV12, ++ .depth = 12, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 1, ++ }, ++ { ++ .name = "4:2:0, planar, NV21", ++ .fourcc = V4L2_PIX_FMT_NV21, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_NV21, ++ .depth = 12, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 1, ++ }, ++ { ++ .name = "RGB32 (BE)", ++ .fourcc = V4L2_PIX_FMT_BGR32, ++ .flags = 0, ++ .mmal = MMAL_ENCODING_BGRA, ++ .depth = 32, ++ .mmal_component = MMAL_COMPONENT_CAMERA, ++ .ybbp = 4, ++ }, ++}; ++ ++static struct mmal_fmt *get_format(struct v4l2_format *f) ++{ ++ struct mmal_fmt *fmt; ++ unsigned int k; ++ ++ for (k = 0; k < ARRAY_SIZE(formats); k++) { ++ fmt = &formats[k]; ++ if (fmt->fourcc == f->fmt.pix.pixelformat) ++ break; ++ } ++ ++ if (k == ARRAY_SIZE(formats)) ++ return NULL; ++ ++ return &formats[k]; ++} ++ ++/* ------------------------------------------------------------------ ++ Videobuf queue operations ++ ------------------------------------------------------------------*/ ++ ++static int queue_setup(struct vb2_queue *vq, ++ unsigned int *nbuffers, unsigned int *nplanes, ++ unsigned int sizes[], struct device *alloc_ctxs[]) ++{ ++ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq); ++ unsigned long size; ++ ++ /* refuse queue setup if port is not configured */ ++ if (dev->capture.port == NULL) { ++ v4l2_err(&dev->v4l2_dev, ++ "%s: capture port not configured\n", __func__); ++ return -EINVAL; ++ } ++ ++ size = dev->capture.port->current_buffer.size; ++ if (size == 0) { ++ v4l2_err(&dev->v4l2_dev, ++ "%s: capture port buffer size is zero\n", __func__); ++ return -EINVAL; ++ } ++ ++ if (*nbuffers < (dev->capture.port->current_buffer.num + 2)) ++ *nbuffers = (dev->capture.port->current_buffer.num + 2); ++ ++ *nplanes = 1; ++ ++ sizes[0] = size; ++ ++ /* ++ * videobuf2-vmalloc allocator is context-less so no need to set ++ * alloc_ctxs array. ++ */ ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p\n", ++ __func__, dev); ++ ++ return 0; ++} ++ ++static int buffer_prepare(struct vb2_buffer *vb) ++{ ++ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vb->vb2_queue); ++ unsigned long size; ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p\n", ++ __func__, dev); ++ ++ BUG_ON(dev->capture.port == NULL); ++ BUG_ON(dev->capture.fmt == NULL); ++ ++ size = dev->capture.stride * dev->capture.height; ++ if (vb2_plane_size(vb, 0) < size) { ++ v4l2_err(&dev->v4l2_dev, ++ "%s data will not fit into plane (%lu < %lu)\n", ++ __func__, vb2_plane_size(vb, 0), size); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static inline bool is_capturing(struct bm2835_mmal_dev *dev) ++{ ++ return dev->capture.camera_port == ++ &dev-> ++ component[MMAL_COMPONENT_CAMERA]->output[MMAL_CAMERA_PORT_CAPTURE]; ++} ++ ++static void buffer_cb(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ int status, ++ struct mmal_buffer *buf, ++ unsigned long length, u32 mmal_flags, s64 dts, s64 pts) ++{ ++ struct bm2835_mmal_dev *dev = port->cb_ctx; ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "%s: status:%d, buf:%p, length:%lu, flags %u, pts %lld\n", ++ __func__, status, buf, length, mmal_flags, pts); ++ ++ if (status != 0) { ++ /* error in transfer */ ++ if (buf != NULL) { ++ /* there was a buffer with the error so return it */ ++ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); ++ } ++ return; ++ } else if (length == 0) { ++ /* stream ended */ ++ if (buf != NULL) { ++ /* this should only ever happen if the port is ++ * disabled and there are buffers still queued ++ */ ++ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); ++ pr_debug("Empty buffer"); ++ } else if (dev->capture.frame_count) { ++ /* grab another frame */ ++ if (is_capturing(dev)) { ++ pr_debug("Grab another frame"); ++ vchiq_mmal_port_parameter_set( ++ instance, ++ dev->capture. ++ camera_port, ++ MMAL_PARAMETER_CAPTURE, ++ &dev->capture. ++ frame_count, ++ sizeof(dev->capture.frame_count)); ++ } ++ } else { ++ /* signal frame completion */ ++ complete(&dev->capture.frame_cmplt); ++ } ++ } else { ++ if (dev->capture.frame_count) { ++ if (dev->capture.vc_start_timestamp != -1 && ++ pts != 0) { ++ struct timeval timestamp; ++ s64 runtime_us = pts - ++ dev->capture.vc_start_timestamp; ++ u32 div = 0; ++ u32 rem = 0; ++ ++ div = ++ div_u64_rem(runtime_us, USEC_PER_SEC, &rem); ++ timestamp.tv_sec = ++ dev->capture.kernel_start_ts.tv_sec + div; ++ timestamp.tv_usec = ++ dev->capture.kernel_start_ts.tv_usec + rem; ++ ++ if (timestamp.tv_usec >= ++ USEC_PER_SEC) { ++ timestamp.tv_sec++; ++ timestamp.tv_usec -= ++ USEC_PER_SEC; ++ } ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Convert start time %d.%06d and %llu " ++ "with offset %llu to %d.%06d\n", ++ (int)dev->capture.kernel_start_ts. ++ tv_sec, ++ (int)dev->capture.kernel_start_ts. ++ tv_usec, ++ dev->capture.vc_start_timestamp, pts, ++ (int)timestamp.tv_sec, ++ (int)timestamp.tv_usec); ++ buf->vb.vb2_buf.timestamp = timestamp.tv_sec * 1000000000ULL + ++ timestamp.tv_usec * 1000ULL; ++ } else { ++ buf->vb.vb2_buf.timestamp = ktime_get_ns(); ++ } ++ ++ vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); ++ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); ++ ++ if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && ++ is_capturing(dev)) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Grab another frame as buffer has EOS"); ++ vchiq_mmal_port_parameter_set( ++ instance, ++ dev->capture. ++ camera_port, ++ MMAL_PARAMETER_CAPTURE, ++ &dev->capture. ++ frame_count, ++ sizeof(dev->capture.frame_count)); ++ } ++ } else { ++ /* signal frame completion */ ++ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); ++ complete(&dev->capture.frame_cmplt); ++ } ++ } ++} ++ ++static int enable_camera(struct bm2835_mmal_dev *dev) ++{ ++ int ret; ++ if (!dev->camera_use_count) { ++ ret = vchiq_mmal_port_parameter_set( ++ dev->instance, ++ &dev->component[MMAL_COMPONENT_CAMERA]->control, ++ MMAL_PARAMETER_CAMERA_NUM, &dev->camera_num, ++ sizeof(dev->camera_num)); ++ if (ret < 0) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed setting camera num, ret %d\n", ret); ++ return -EINVAL; ++ } ++ ++ ret = vchiq_mmal_component_enable( ++ dev->instance, ++ dev->component[MMAL_COMPONENT_CAMERA]); ++ if (ret < 0) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed enabling camera, ret %d\n", ret); ++ return -EINVAL; ++ } ++ } ++ dev->camera_use_count++; ++ v4l2_dbg(1, bcm2835_v4l2_debug, ++ &dev->v4l2_dev, "enabled camera (refcount %d)\n", ++ dev->camera_use_count); ++ return 0; ++} ++ ++static int disable_camera(struct bm2835_mmal_dev *dev) ++{ ++ int ret; ++ if (!dev->camera_use_count) { ++ v4l2_err(&dev->v4l2_dev, ++ "Disabled the camera when already disabled\n"); ++ return -EINVAL; ++ } ++ dev->camera_use_count--; ++ if (!dev->camera_use_count) { ++ unsigned int i = 0xFFFFFFFF; ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Disabling camera\n"); ++ ret = ++ vchiq_mmal_component_disable( ++ dev->instance, ++ dev->component[MMAL_COMPONENT_CAMERA]); ++ if (ret < 0) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed disabling camera, ret %d\n", ret); ++ return -EINVAL; ++ } ++ vchiq_mmal_port_parameter_set( ++ dev->instance, ++ &dev->component[MMAL_COMPONENT_CAMERA]->control, ++ MMAL_PARAMETER_CAMERA_NUM, &i, ++ sizeof(i)); ++ } ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Camera refcount now %d\n", dev->camera_use_count); ++ return 0; ++} ++ ++static void buffer_queue(struct vb2_buffer *vb) ++{ ++ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vb->vb2_queue); ++ struct vb2_v4l2_buffer *vb2 = to_vb2_v4l2_buffer(vb); ++ struct mmal_buffer *buf = container_of(vb2, struct mmal_buffer, vb); ++ int ret; ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "%s: dev:%p buf:%p\n", __func__, dev, buf); ++ ++ buf->buffer = vb2_plane_vaddr(&buf->vb.vb2_buf, 0); ++ buf->buffer_size = vb2_plane_size(&buf->vb.vb2_buf, 0); ++ ++ ret = vchiq_mmal_submit_buffer(dev->instance, dev->capture.port, buf); ++ if (ret < 0) ++ v4l2_err(&dev->v4l2_dev, "%s: error submitting buffer\n", ++ __func__); ++} ++ ++static int start_streaming(struct vb2_queue *vq, unsigned int count) ++{ ++ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq); ++ int ret; ++ int parameter_size; ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p\n", ++ __func__, dev); ++ ++ /* ensure a format has actually been set */ ++ if (dev->capture.port == NULL) ++ return -EINVAL; ++ ++ if (enable_camera(dev) < 0) { ++ v4l2_err(&dev->v4l2_dev, "Failed to enable camera\n"); ++ return -EINVAL; ++ } ++ ++ /*init_completion(&dev->capture.frame_cmplt); */ ++ ++ /* enable frame capture */ ++ dev->capture.frame_count = 1; ++ ++ /* if the preview is not already running, wait for a few frames for AGC ++ * to settle down. ++ */ ++ if (!dev->component[MMAL_COMPONENT_PREVIEW]->enabled) ++ msleep(300); ++ ++ /* enable the connection from camera to encoder (if applicable) */ ++ if (dev->capture.camera_port != dev->capture.port ++ && dev->capture.camera_port) { ++ ret = vchiq_mmal_port_enable(dev->instance, ++ dev->capture.camera_port, NULL); ++ if (ret) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed to enable encode tunnel - error %d\n", ++ ret); ++ return -1; ++ } ++ } ++ ++ /* Get VC timestamp at this point in time */ ++ parameter_size = sizeof(dev->capture.vc_start_timestamp); ++ if (vchiq_mmal_port_parameter_get(dev->instance, ++ dev->capture.camera_port, ++ MMAL_PARAMETER_SYSTEM_TIME, ++ &dev->capture.vc_start_timestamp, ++ ¶meter_size)) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed to get VC start time - update your VC f/w\n"); ++ ++ /* Flag to indicate just to rely on kernel timestamps */ ++ dev->capture.vc_start_timestamp = -1; ++ } else ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Start time %lld size %d\n", ++ dev->capture.vc_start_timestamp, parameter_size); ++ ++ v4l2_get_timestamp(&dev->capture.kernel_start_ts); ++ ++ /* enable the camera port */ ++ dev->capture.port->cb_ctx = dev; ++ ret = ++ vchiq_mmal_port_enable(dev->instance, dev->capture.port, buffer_cb); ++ if (ret) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed to enable capture port - error %d. " ++ "Disabling camera port again\n", ret); ++ ++ vchiq_mmal_port_disable(dev->instance, ++ dev->capture.camera_port); ++ if (disable_camera(dev) < 0) { ++ v4l2_err(&dev->v4l2_dev, "Failed to disable camera\n"); ++ return -EINVAL; ++ } ++ return -1; ++ } ++ ++ /* capture the first frame */ ++ vchiq_mmal_port_parameter_set(dev->instance, ++ dev->capture.camera_port, ++ MMAL_PARAMETER_CAPTURE, ++ &dev->capture.frame_count, ++ sizeof(dev->capture.frame_count)); ++ return 0; ++} ++ ++/* abort streaming and wait for last buffer */ ++static void stop_streaming(struct vb2_queue *vq) ++{ ++ int ret; ++ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq); ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p\n", ++ __func__, dev); ++ ++ init_completion(&dev->capture.frame_cmplt); ++ dev->capture.frame_count = 0; ++ ++ /* ensure a format has actually been set */ ++ if (dev->capture.port == NULL) { ++ v4l2_err(&dev->v4l2_dev, ++ "no capture port - stream not started?\n"); ++ return; ++ } ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "stopping capturing\n"); ++ ++ /* stop capturing frames */ ++ vchiq_mmal_port_parameter_set(dev->instance, ++ dev->capture.camera_port, ++ MMAL_PARAMETER_CAPTURE, ++ &dev->capture.frame_count, ++ sizeof(dev->capture.frame_count)); ++ ++ /* wait for last frame to complete */ ++ ret = wait_for_completion_timeout(&dev->capture.frame_cmplt, HZ); ++ if (ret <= 0) ++ v4l2_err(&dev->v4l2_dev, ++ "error %d waiting for frame completion\n", ret); ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "disabling connection\n"); ++ ++ /* disable the connection from camera to encoder */ ++ ret = vchiq_mmal_port_disable(dev->instance, dev->capture.camera_port); ++ if (!ret && dev->capture.camera_port != dev->capture.port) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "disabling port\n"); ++ ret = vchiq_mmal_port_disable(dev->instance, dev->capture.port); ++ } else if (dev->capture.camera_port != dev->capture.port) { ++ v4l2_err(&dev->v4l2_dev, "port_disable failed, error %d\n", ++ ret); ++ } ++ ++ if (disable_camera(dev) < 0) ++ v4l2_err(&dev->v4l2_dev, "Failed to disable camera\n"); ++} ++ ++static void bm2835_mmal_lock(struct vb2_queue *vq) ++{ ++ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq); ++ mutex_lock(&dev->mutex); ++} ++ ++static void bm2835_mmal_unlock(struct vb2_queue *vq) ++{ ++ struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq); ++ mutex_unlock(&dev->mutex); ++} ++ ++static struct vb2_ops bm2835_mmal_video_qops = { ++ .queue_setup = queue_setup, ++ .buf_prepare = buffer_prepare, ++ .buf_queue = buffer_queue, ++ .start_streaming = start_streaming, ++ .stop_streaming = stop_streaming, ++ .wait_prepare = bm2835_mmal_unlock, ++ .wait_finish = bm2835_mmal_lock, ++}; ++ ++/* ------------------------------------------------------------------ ++ IOCTL operations ++ ------------------------------------------------------------------*/ ++ ++static int set_overlay_params(struct bm2835_mmal_dev *dev, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ struct mmal_parameter_displayregion prev_config = { ++ .set = MMAL_DISPLAY_SET_LAYER | MMAL_DISPLAY_SET_ALPHA | ++ MMAL_DISPLAY_SET_DEST_RECT | MMAL_DISPLAY_SET_FULLSCREEN, ++ .layer = PREVIEW_LAYER, ++ .alpha = dev->overlay.global_alpha, ++ .fullscreen = 0, ++ .dest_rect = { ++ .x = dev->overlay.w.left, ++ .y = dev->overlay.w.top, ++ .width = dev->overlay.w.width, ++ .height = dev->overlay.w.height, ++ }, ++ }; ++ ret = vchiq_mmal_port_parameter_set(dev->instance, port, ++ MMAL_PARAMETER_DISPLAYREGION, ++ &prev_config, sizeof(prev_config)); ++ ++ return ret; ++} ++ ++/* overlay ioctl */ ++static int vidioc_enum_fmt_vid_overlay(struct file *file, void *priv, ++ struct v4l2_fmtdesc *f) ++{ ++ struct mmal_fmt *fmt; ++ ++ if (f->index >= ARRAY_SIZE(formats)) ++ return -EINVAL; ++ ++ fmt = &formats[f->index]; ++ ++ strlcpy(f->description, fmt->name, sizeof(f->description)); ++ f->pixelformat = fmt->fourcc; ++ f->flags = fmt->flags; ++ ++ return 0; ++} ++ ++static int vidioc_g_fmt_vid_overlay(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ ++ f->fmt.win = dev->overlay; ++ ++ return 0; ++} ++ ++static int vidioc_try_fmt_vid_overlay(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ ++ f->fmt.win.field = V4L2_FIELD_NONE; ++ f->fmt.win.chromakey = 0; ++ f->fmt.win.clips = NULL; ++ f->fmt.win.clipcount = 0; ++ f->fmt.win.bitmap = NULL; ++ ++ v4l_bound_align_image(&f->fmt.win.w.width, MIN_WIDTH, dev->max_width, 1, ++ &f->fmt.win.w.height, MIN_HEIGHT, dev->max_height, ++ 1, 0); ++ v4l_bound_align_image(&f->fmt.win.w.left, MIN_WIDTH, dev->max_width, 1, ++ &f->fmt.win.w.top, MIN_HEIGHT, dev->max_height, ++ 1, 0); ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Overlay: Now w/h %dx%d l/t %dx%d\n", ++ f->fmt.win.w.width, f->fmt.win.w.height, ++ f->fmt.win.w.left, f->fmt.win.w.top); ++ ++ v4l2_dump_win_format(1, ++ bcm2835_v4l2_debug, ++ &dev->v4l2_dev, ++ &f->fmt.win, ++ __func__); ++ return 0; ++} ++ ++static int vidioc_s_fmt_vid_overlay(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ ++ vidioc_try_fmt_vid_overlay(file, priv, f); ++ ++ dev->overlay = f->fmt.win; ++ if (dev->component[MMAL_COMPONENT_PREVIEW]->enabled) { ++ set_overlay_params(dev, ++ &dev->component[MMAL_COMPONENT_PREVIEW]->input[0]); ++ } ++ ++ return 0; ++} ++ ++static int vidioc_overlay(struct file *file, void *f, unsigned int on) ++{ ++ int ret; ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ struct vchiq_mmal_port *src; ++ struct vchiq_mmal_port *dst; ++ if ((on && dev->component[MMAL_COMPONENT_PREVIEW]->enabled) || ++ (!on && !dev->component[MMAL_COMPONENT_PREVIEW]->enabled)) ++ return 0; /* already in requested state */ ++ ++ src = ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_PREVIEW]; ++ ++ if (!on) { ++ /* disconnect preview ports and disable component */ ++ ret = vchiq_mmal_port_disable(dev->instance, src); ++ if (!ret) ++ ret = ++ vchiq_mmal_port_connect_tunnel(dev->instance, src, ++ NULL); ++ if (ret >= 0) ++ ret = vchiq_mmal_component_disable( ++ dev->instance, ++ dev->component[MMAL_COMPONENT_PREVIEW]); ++ ++ disable_camera(dev); ++ return ret; ++ } ++ ++ /* set preview port format and connect it to output */ ++ dst = &dev->component[MMAL_COMPONENT_PREVIEW]->input[0]; ++ ++ ret = vchiq_mmal_port_set_format(dev->instance, src); ++ if (ret < 0) ++ goto error; ++ ++ ret = set_overlay_params(dev, dst); ++ if (ret < 0) ++ goto error; ++ ++ if (enable_camera(dev) < 0) ++ goto error; ++ ++ ret = vchiq_mmal_component_enable( ++ dev->instance, ++ dev->component[MMAL_COMPONENT_PREVIEW]); ++ if (ret < 0) ++ goto error; ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "connecting %p to %p\n", ++ src, dst); ++ ret = vchiq_mmal_port_connect_tunnel(dev->instance, src, dst); ++ if (!ret) ++ ret = vchiq_mmal_port_enable(dev->instance, src, NULL); ++error: ++ return ret; ++} ++ ++static int vidioc_g_fbuf(struct file *file, void *fh, ++ struct v4l2_framebuffer *a) ++{ ++ /* The video overlay must stay within the framebuffer and can't be ++ positioned independently. */ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ struct vchiq_mmal_port *preview_port = ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_PREVIEW]; ++ ++ a->capability = V4L2_FBUF_CAP_EXTERNOVERLAY | ++ V4L2_FBUF_CAP_GLOBAL_ALPHA; ++ a->flags = V4L2_FBUF_FLAG_OVERLAY; ++ a->fmt.width = preview_port->es.video.width; ++ a->fmt.height = preview_port->es.video.height; ++ a->fmt.pixelformat = V4L2_PIX_FMT_YUV420; ++ a->fmt.bytesperline = preview_port->es.video.width; ++ a->fmt.sizeimage = (preview_port->es.video.width * ++ preview_port->es.video.height * 3)>>1; ++ a->fmt.colorspace = V4L2_COLORSPACE_SMPTE170M; ++ ++ return 0; ++} ++ ++/* input ioctls */ ++static int vidioc_enum_input(struct file *file, void *priv, ++ struct v4l2_input *inp) ++{ ++ /* only a single camera input */ ++ if (inp->index != 0) ++ return -EINVAL; ++ ++ inp->type = V4L2_INPUT_TYPE_CAMERA; ++ sprintf(inp->name, "Camera %u", inp->index); ++ return 0; ++} ++ ++static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) ++{ ++ *i = 0; ++ return 0; ++} ++ ++static int vidioc_s_input(struct file *file, void *priv, unsigned int i) ++{ ++ if (i != 0) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++/* capture ioctls */ ++static int vidioc_querycap(struct file *file, void *priv, ++ struct v4l2_capability *cap) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ u32 major; ++ u32 minor; ++ ++ vchiq_mmal_version(dev->instance, &major, &minor); ++ ++ strcpy(cap->driver, "bm2835 mmal"); ++ snprintf(cap->card, sizeof(cap->card), "mmal service %d.%d", ++ major, minor); ++ ++ snprintf(cap->bus_info, sizeof(cap->bus_info), ++ "platform:%s", dev->v4l2_dev.name); ++ cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY | ++ V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; ++ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; ++ ++ return 0; ++} ++ ++static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_fmtdesc *f) ++{ ++ struct mmal_fmt *fmt; ++ ++ if (f->index >= ARRAY_SIZE(formats)) ++ return -EINVAL; ++ ++ fmt = &formats[f->index]; ++ ++ strlcpy(f->description, fmt->name, sizeof(f->description)); ++ f->pixelformat = fmt->fourcc; ++ f->flags = fmt->flags; ++ ++ return 0; ++} ++ ++static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ ++ f->fmt.pix.width = dev->capture.width; ++ f->fmt.pix.height = dev->capture.height; ++ f->fmt.pix.field = V4L2_FIELD_NONE; ++ f->fmt.pix.pixelformat = dev->capture.fmt->fourcc; ++ f->fmt.pix.bytesperline = dev->capture.stride; ++ f->fmt.pix.sizeimage = dev->capture.buffersize; ++ ++ if (dev->capture.fmt->fourcc == V4L2_PIX_FMT_RGB24) ++ f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB; ++ else if (dev->capture.fmt->fourcc == V4L2_PIX_FMT_JPEG) ++ f->fmt.pix.colorspace = V4L2_COLORSPACE_JPEG; ++ else ++ f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; ++ f->fmt.pix.priv = 0; ++ ++ v4l2_dump_pix_format(1, bcm2835_v4l2_debug, &dev->v4l2_dev, &f->fmt.pix, ++ __func__); ++ return 0; ++} ++ ++static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ struct mmal_fmt *mfmt; ++ ++ mfmt = get_format(f); ++ if (!mfmt) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Fourcc format (0x%08x) unknown.\n", ++ f->fmt.pix.pixelformat); ++ f->fmt.pix.pixelformat = formats[0].fourcc; ++ mfmt = get_format(f); ++ } ++ ++ f->fmt.pix.field = V4L2_FIELD_NONE; ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Clipping/aligning %dx%d format %08X\n", ++ f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.pixelformat); ++ ++ v4l_bound_align_image(&f->fmt.pix.width, MIN_WIDTH, dev->max_width, 1, ++ &f->fmt.pix.height, MIN_HEIGHT, dev->max_height, ++ 1, 0); ++ f->fmt.pix.bytesperline = f->fmt.pix.width * mfmt->ybbp; ++ ++ /* Image buffer has to be padded to allow for alignment, even though ++ * we then remove that padding before delivering the buffer. ++ */ ++ f->fmt.pix.sizeimage = ((f->fmt.pix.height+15)&~15) * ++ (((f->fmt.pix.width+31)&~31) * mfmt->depth) >> 3; ++ ++ if ((mfmt->flags & V4L2_FMT_FLAG_COMPRESSED) && ++ f->fmt.pix.sizeimage < MIN_BUFFER_SIZE) ++ f->fmt.pix.sizeimage = MIN_BUFFER_SIZE; ++ ++ if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB24) ++ f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB; ++ else if (f->fmt.pix.pixelformat == V4L2_PIX_FMT_JPEG) ++ f->fmt.pix.colorspace = V4L2_COLORSPACE_JPEG; ++ else ++ f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; ++ f->fmt.pix.priv = 0; ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Now %dx%d format %08X\n", ++ f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.pixelformat); ++ ++ v4l2_dump_pix_format(1, bcm2835_v4l2_debug, &dev->v4l2_dev, &f->fmt.pix, ++ __func__); ++ return 0; ++} ++ ++static int mmal_setup_components(struct bm2835_mmal_dev *dev, ++ struct v4l2_format *f) ++{ ++ int ret; ++ struct vchiq_mmal_port *port = NULL, *camera_port = NULL; ++ struct vchiq_mmal_component *encode_component = NULL; ++ struct mmal_fmt *mfmt = get_format(f); ++ ++ BUG_ON(!mfmt); ++ ++ if (dev->capture.encode_component) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "vid_cap - disconnect previous tunnel\n"); ++ ++ /* Disconnect any previous connection */ ++ vchiq_mmal_port_connect_tunnel(dev->instance, ++ dev->capture.camera_port, NULL); ++ dev->capture.camera_port = NULL; ++ ret = vchiq_mmal_component_disable(dev->instance, ++ dev->capture. ++ encode_component); ++ if (ret) ++ v4l2_err(&dev->v4l2_dev, ++ "Failed to disable encode component %d\n", ++ ret); ++ ++ dev->capture.encode_component = NULL; ++ } ++ /* format dependant port setup */ ++ switch (mfmt->mmal_component) { ++ case MMAL_COMPONENT_CAMERA: ++ /* Make a further decision on port based on resolution */ ++ if (f->fmt.pix.width <= max_video_width ++ && f->fmt.pix.height <= max_video_height) ++ camera_port = port = ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_VIDEO]; ++ else ++ camera_port = port = ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_CAPTURE]; ++ break; ++ case MMAL_COMPONENT_IMAGE_ENCODE: ++ encode_component = dev->component[MMAL_COMPONENT_IMAGE_ENCODE]; ++ port = &dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->output[0]; ++ camera_port = ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_CAPTURE]; ++ break; ++ case MMAL_COMPONENT_VIDEO_ENCODE: ++ encode_component = dev->component[MMAL_COMPONENT_VIDEO_ENCODE]; ++ port = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; ++ camera_port = ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_VIDEO]; ++ break; ++ default: ++ break; ++ } ++ ++ if (!port) ++ return -EINVAL; ++ ++ if (encode_component) ++ camera_port->format.encoding = MMAL_ENCODING_OPAQUE; ++ else ++ camera_port->format.encoding = mfmt->mmal; ++ ++ if (dev->rgb_bgr_swapped) { ++ if (camera_port->format.encoding == MMAL_ENCODING_RGB24) ++ camera_port->format.encoding = MMAL_ENCODING_BGR24; ++ else if (camera_port->format.encoding == MMAL_ENCODING_BGR24) ++ camera_port->format.encoding = MMAL_ENCODING_RGB24; ++ } ++ ++ camera_port->format.encoding_variant = 0; ++ camera_port->es.video.width = f->fmt.pix.width; ++ camera_port->es.video.height = f->fmt.pix.height; ++ camera_port->es.video.crop.x = 0; ++ camera_port->es.video.crop.y = 0; ++ camera_port->es.video.crop.width = f->fmt.pix.width; ++ camera_port->es.video.crop.height = f->fmt.pix.height; ++ camera_port->es.video.frame_rate.num = 0; ++ camera_port->es.video.frame_rate.den = 1; ++ camera_port->es.video.color_space = MMAL_COLOR_SPACE_JPEG_JFIF; ++ ++ ret = vchiq_mmal_port_set_format(dev->instance, camera_port); ++ ++ if (!ret ++ && camera_port == ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_VIDEO]) { ++ bool overlay_enabled = ++ !!dev->component[MMAL_COMPONENT_PREVIEW]->enabled; ++ struct vchiq_mmal_port *preview_port = ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_PREVIEW]; ++ /* Preview and encode ports need to match on resolution */ ++ if (overlay_enabled) { ++ /* Need to disable the overlay before we can update ++ * the resolution ++ */ ++ ret = ++ vchiq_mmal_port_disable(dev->instance, ++ preview_port); ++ if (!ret) ++ ret = ++ vchiq_mmal_port_connect_tunnel( ++ dev->instance, ++ preview_port, ++ NULL); ++ } ++ preview_port->es.video.width = f->fmt.pix.width; ++ preview_port->es.video.height = f->fmt.pix.height; ++ preview_port->es.video.crop.x = 0; ++ preview_port->es.video.crop.y = 0; ++ preview_port->es.video.crop.width = f->fmt.pix.width; ++ preview_port->es.video.crop.height = f->fmt.pix.height; ++ preview_port->es.video.frame_rate.num = ++ dev->capture.timeperframe.denominator; ++ preview_port->es.video.frame_rate.den = ++ dev->capture.timeperframe.numerator; ++ ret = vchiq_mmal_port_set_format(dev->instance, preview_port); ++ if (overlay_enabled) { ++ ret = vchiq_mmal_port_connect_tunnel( ++ dev->instance, ++ preview_port, ++ &dev->component[MMAL_COMPONENT_PREVIEW]->input[0]); ++ if (!ret) ++ ret = vchiq_mmal_port_enable(dev->instance, ++ preview_port, ++ NULL); ++ } ++ } ++ ++ if (ret) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "%s failed to set format %dx%d %08X\n", __func__, ++ f->fmt.pix.width, f->fmt.pix.height, ++ f->fmt.pix.pixelformat); ++ /* ensure capture is not going to be tried */ ++ dev->capture.port = NULL; ++ } else { ++ if (encode_component) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "vid_cap - set up encode comp\n"); ++ ++ /* configure buffering */ ++ camera_port->current_buffer.size = ++ camera_port->recommended_buffer.size; ++ camera_port->current_buffer.num = ++ camera_port->recommended_buffer.num; ++ ++ ret = ++ vchiq_mmal_port_connect_tunnel( ++ dev->instance, ++ camera_port, ++ &encode_component->input[0]); ++ if (ret) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, ++ &dev->v4l2_dev, ++ "%s failed to create connection\n", ++ __func__); ++ /* ensure capture is not going to be tried */ ++ dev->capture.port = NULL; ++ } else { ++ port->es.video.width = f->fmt.pix.width; ++ port->es.video.height = f->fmt.pix.height; ++ port->es.video.crop.x = 0; ++ port->es.video.crop.y = 0; ++ port->es.video.crop.width = f->fmt.pix.width; ++ port->es.video.crop.height = f->fmt.pix.height; ++ port->es.video.frame_rate.num = ++ dev->capture.timeperframe.denominator; ++ port->es.video.frame_rate.den = ++ dev->capture.timeperframe.numerator; ++ ++ port->format.encoding = mfmt->mmal; ++ port->format.encoding_variant = 0; ++ /* Set any encoding specific parameters */ ++ switch (mfmt->mmal_component) { ++ case MMAL_COMPONENT_VIDEO_ENCODE: ++ port->format.bitrate = ++ dev->capture.encode_bitrate; ++ break; ++ case MMAL_COMPONENT_IMAGE_ENCODE: ++ /* Could set EXIF parameters here */ ++ break; ++ default: ++ break; ++ } ++ ret = vchiq_mmal_port_set_format(dev->instance, ++ port); ++ if (ret) ++ v4l2_dbg(1, bcm2835_v4l2_debug, ++ &dev->v4l2_dev, ++ "%s failed to set format %dx%d fmt %08X\n", ++ __func__, ++ f->fmt.pix.width, ++ f->fmt.pix.height, ++ f->fmt.pix.pixelformat ++ ); ++ } ++ ++ if (!ret) { ++ ret = vchiq_mmal_component_enable( ++ dev->instance, ++ encode_component); ++ if (ret) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, ++ &dev->v4l2_dev, ++ "%s Failed to enable encode components\n", ++ __func__); ++ } ++ } ++ if (!ret) { ++ /* configure buffering */ ++ port->current_buffer.num = 1; ++ port->current_buffer.size = ++ f->fmt.pix.sizeimage; ++ if (port->format.encoding == ++ MMAL_ENCODING_JPEG) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, ++ &dev->v4l2_dev, ++ "JPG - buf size now %d was %d\n", ++ f->fmt.pix.sizeimage, ++ port->current_buffer.size); ++ port->current_buffer.size = ++ (f->fmt.pix.sizeimage < ++ (100 << 10)) ++ ? (100 << 10) : f->fmt.pix. ++ sizeimage; ++ } ++ v4l2_dbg(1, bcm2835_v4l2_debug, ++ &dev->v4l2_dev, ++ "vid_cap - cur_buf.size set to %d\n", ++ f->fmt.pix.sizeimage); ++ port->current_buffer.alignment = 0; ++ } ++ } else { ++ /* configure buffering */ ++ camera_port->current_buffer.num = 1; ++ camera_port->current_buffer.size = f->fmt.pix.sizeimage; ++ camera_port->current_buffer.alignment = 0; ++ } ++ ++ if (!ret) { ++ dev->capture.fmt = mfmt; ++ dev->capture.stride = f->fmt.pix.bytesperline; ++ dev->capture.width = camera_port->es.video.crop.width; ++ dev->capture.height = camera_port->es.video.crop.height; ++ dev->capture.buffersize = port->current_buffer.size; ++ ++ /* select port for capture */ ++ dev->capture.port = port; ++ dev->capture.camera_port = camera_port; ++ dev->capture.encode_component = encode_component; ++ v4l2_dbg(1, bcm2835_v4l2_debug, ++ &dev->v4l2_dev, ++ "Set dev->capture.fmt %08X, %dx%d, stride %d, size %d", ++ port->format.encoding, ++ dev->capture.width, dev->capture.height, ++ dev->capture.stride, dev->capture.buffersize); ++ } ++ } ++ ++ /* todo: Need to convert the vchiq/mmal error into a v4l2 error. */ ++ return ret; ++} ++ ++static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ int ret; ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ struct mmal_fmt *mfmt; ++ ++ /* try the format to set valid parameters */ ++ ret = vidioc_try_fmt_vid_cap(file, priv, f); ++ if (ret) { ++ v4l2_err(&dev->v4l2_dev, ++ "vid_cap - vidioc_try_fmt_vid_cap failed\n"); ++ return ret; ++ } ++ ++ /* if a capture is running refuse to set format */ ++ if (vb2_is_busy(&dev->capture.vb_vidq)) { ++ v4l2_info(&dev->v4l2_dev, "%s device busy\n", __func__); ++ return -EBUSY; ++ } ++ ++ /* If the format is unsupported v4l2 says we should switch to ++ * a supported one and not return an error. */ ++ mfmt = get_format(f); ++ if (!mfmt) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Fourcc format (0x%08x) unknown.\n", ++ f->fmt.pix.pixelformat); ++ f->fmt.pix.pixelformat = formats[0].fourcc; ++ mfmt = get_format(f); ++ } ++ ++ ret = mmal_setup_components(dev, f); ++ if (ret != 0) { ++ v4l2_err(&dev->v4l2_dev, ++ "%s: failed to setup mmal components: %d\n", ++ __func__, ret); ++ ret = -EINVAL; ++ } ++ ++ return ret; ++} ++ ++int vidioc_enum_framesizes(struct file *file, void *fh, ++ struct v4l2_frmsizeenum *fsize) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ static const struct v4l2_frmsize_stepwise sizes = { ++ MIN_WIDTH, 0, 2, ++ MIN_HEIGHT, 0, 2 ++ }; ++ int i; ++ ++ if (fsize->index) ++ return -EINVAL; ++ for (i = 0; i < ARRAY_SIZE(formats); i++) ++ if (formats[i].fourcc == fsize->pixel_format) ++ break; ++ if (i == ARRAY_SIZE(formats)) ++ return -EINVAL; ++ fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE; ++ fsize->stepwise = sizes; ++ fsize->stepwise.max_width = dev->max_width; ++ fsize->stepwise.max_height = dev->max_height; ++ return 0; ++} ++ ++/* timeperframe is arbitrary and continous */ ++static int vidioc_enum_frameintervals(struct file *file, void *priv, ++ struct v4l2_frmivalenum *fival) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ int i; ++ ++ if (fival->index) ++ return -EINVAL; ++ ++ for (i = 0; i < ARRAY_SIZE(formats); i++) ++ if (formats[i].fourcc == fival->pixel_format) ++ break; ++ if (i == ARRAY_SIZE(formats)) ++ return -EINVAL; ++ ++ /* regarding width & height - we support any within range */ ++ if (fival->width < MIN_WIDTH || fival->width > dev->max_width || ++ fival->height < MIN_HEIGHT || fival->height > dev->max_height) ++ return -EINVAL; ++ ++ fival->type = V4L2_FRMIVAL_TYPE_CONTINUOUS; ++ ++ /* fill in stepwise (step=1.0 is requred by V4L2 spec) */ ++ fival->stepwise.min = tpf_min; ++ fival->stepwise.max = tpf_max; ++ fival->stepwise.step = (struct v4l2_fract) {1, 1}; ++ ++ return 0; ++} ++ ++static int vidioc_g_parm(struct file *file, void *priv, ++ struct v4l2_streamparm *parm) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ ++ if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) ++ return -EINVAL; ++ ++ parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME; ++ parm->parm.capture.timeperframe = dev->capture.timeperframe; ++ parm->parm.capture.readbuffers = 1; ++ return 0; ++} ++ ++#define FRACT_CMP(a, OP, b) \ ++ ((u64)(a).numerator * (b).denominator OP \ ++ (u64)(b).numerator * (a).denominator) ++ ++static int vidioc_s_parm(struct file *file, void *priv, ++ struct v4l2_streamparm *parm) ++{ ++ struct bm2835_mmal_dev *dev = video_drvdata(file); ++ struct v4l2_fract tpf; ++ struct mmal_parameter_rational fps_param; ++ ++ if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) ++ return -EINVAL; ++ ++ tpf = parm->parm.capture.timeperframe; ++ ++ /* tpf: {*, 0} resets timing; clip to [min, max]*/ ++ tpf = tpf.denominator ? tpf : tpf_default; ++ tpf = FRACT_CMP(tpf, <, tpf_min) ? tpf_min : tpf; ++ tpf = FRACT_CMP(tpf, >, tpf_max) ? tpf_max : tpf; ++ ++ dev->capture.timeperframe = tpf; ++ parm->parm.capture.timeperframe = tpf; ++ parm->parm.capture.readbuffers = 1; ++ parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME; ++ ++ fps_param.num = 0; /* Select variable fps, and then use ++ * FPS_RANGE to select the actual limits. ++ */ ++ fps_param.den = 1; ++ set_framerate_params(dev); ++ ++ return 0; ++} ++ ++static const struct v4l2_ioctl_ops camera0_ioctl_ops = { ++ /* overlay */ ++ .vidioc_enum_fmt_vid_overlay = vidioc_enum_fmt_vid_overlay, ++ .vidioc_g_fmt_vid_overlay = vidioc_g_fmt_vid_overlay, ++ .vidioc_try_fmt_vid_overlay = vidioc_try_fmt_vid_overlay, ++ .vidioc_s_fmt_vid_overlay = vidioc_s_fmt_vid_overlay, ++ .vidioc_overlay = vidioc_overlay, ++ .vidioc_g_fbuf = vidioc_g_fbuf, ++ ++ /* inputs */ ++ .vidioc_enum_input = vidioc_enum_input, ++ .vidioc_g_input = vidioc_g_input, ++ .vidioc_s_input = vidioc_s_input, ++ ++ /* capture */ ++ .vidioc_querycap = vidioc_querycap, ++ .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, ++ .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, ++ .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, ++ .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, ++ ++ /* buffer management */ ++ .vidioc_reqbufs = vb2_ioctl_reqbufs, ++ .vidioc_create_bufs = vb2_ioctl_create_bufs, ++ .vidioc_prepare_buf = vb2_ioctl_prepare_buf, ++ .vidioc_querybuf = vb2_ioctl_querybuf, ++ .vidioc_qbuf = vb2_ioctl_qbuf, ++ .vidioc_dqbuf = vb2_ioctl_dqbuf, ++ .vidioc_enum_framesizes = vidioc_enum_framesizes, ++ .vidioc_enum_frameintervals = vidioc_enum_frameintervals, ++ .vidioc_g_parm = vidioc_g_parm, ++ .vidioc_s_parm = vidioc_s_parm, ++ .vidioc_streamon = vb2_ioctl_streamon, ++ .vidioc_streamoff = vb2_ioctl_streamoff, ++ ++ .vidioc_log_status = v4l2_ctrl_log_status, ++ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, ++ .vidioc_unsubscribe_event = v4l2_event_unsubscribe, ++}; ++ ++static const struct v4l2_ioctl_ops camera0_ioctl_ops_gstreamer = { ++ /* overlay */ ++ .vidioc_enum_fmt_vid_overlay = vidioc_enum_fmt_vid_overlay, ++ .vidioc_g_fmt_vid_overlay = vidioc_g_fmt_vid_overlay, ++ .vidioc_try_fmt_vid_overlay = vidioc_try_fmt_vid_overlay, ++ .vidioc_s_fmt_vid_overlay = vidioc_s_fmt_vid_overlay, ++ .vidioc_overlay = vidioc_overlay, ++ .vidioc_g_fbuf = vidioc_g_fbuf, ++ ++ /* inputs */ ++ .vidioc_enum_input = vidioc_enum_input, ++ .vidioc_g_input = vidioc_g_input, ++ .vidioc_s_input = vidioc_s_input, ++ ++ /* capture */ ++ .vidioc_querycap = vidioc_querycap, ++ .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, ++ .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, ++ .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, ++ .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, ++ ++ /* buffer management */ ++ .vidioc_reqbufs = vb2_ioctl_reqbufs, ++ .vidioc_create_bufs = vb2_ioctl_create_bufs, ++ .vidioc_prepare_buf = vb2_ioctl_prepare_buf, ++ .vidioc_querybuf = vb2_ioctl_querybuf, ++ .vidioc_qbuf = vb2_ioctl_qbuf, ++ .vidioc_dqbuf = vb2_ioctl_dqbuf, ++ /* Remove this function ptr to fix gstreamer bug ++ .vidioc_enum_framesizes = vidioc_enum_framesizes, */ ++ .vidioc_enum_frameintervals = vidioc_enum_frameintervals, ++ .vidioc_g_parm = vidioc_g_parm, ++ .vidioc_s_parm = vidioc_s_parm, ++ .vidioc_streamon = vb2_ioctl_streamon, ++ .vidioc_streamoff = vb2_ioctl_streamoff, ++ ++ .vidioc_log_status = v4l2_ctrl_log_status, ++ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, ++ .vidioc_unsubscribe_event = v4l2_event_unsubscribe, ++}; ++ ++/* ------------------------------------------------------------------ ++ Driver init/finalise ++ ------------------------------------------------------------------*/ ++ ++static const struct v4l2_file_operations camera0_fops = { ++ .owner = THIS_MODULE, ++ .open = v4l2_fh_open, ++ .release = vb2_fop_release, ++ .read = vb2_fop_read, ++ .poll = vb2_fop_poll, ++ .unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */ ++ .mmap = vb2_fop_mmap, ++}; ++ ++static struct video_device vdev_template = { ++ .name = "camera0", ++ .fops = &camera0_fops, ++ .ioctl_ops = &camera0_ioctl_ops, ++ .release = video_device_release_empty, ++}; ++ ++/* Returns the number of cameras, and also the max resolution supported ++ * by those cameras. ++ */ ++static int get_num_cameras(struct vchiq_mmal_instance *instance, ++ unsigned int resolutions[][2], int num_resolutions) ++{ ++ int ret; ++ struct vchiq_mmal_component *cam_info_component; ++ struct mmal_parameter_camera_info_t cam_info = {0}; ++ int param_size = sizeof(cam_info); ++ int i; ++ ++ /* create a camera_info component */ ++ ret = vchiq_mmal_component_init(instance, "camera_info", ++ &cam_info_component); ++ if (ret < 0) ++ /* Unusual failure - let's guess one camera. */ ++ return 1; ++ ++ if (vchiq_mmal_port_parameter_get(instance, ++ &cam_info_component->control, ++ MMAL_PARAMETER_CAMERA_INFO, ++ &cam_info, ++ ¶m_size)) { ++ pr_info("Failed to get camera info\n"); ++ } ++ for (i = 0; ++ i < (cam_info.num_cameras > num_resolutions ? ++ num_resolutions : ++ cam_info.num_cameras); ++ i++) { ++ resolutions[i][0] = cam_info.cameras[i].max_width; ++ resolutions[i][1] = cam_info.cameras[i].max_height; ++ } ++ ++ vchiq_mmal_component_finalise(instance, ++ cam_info_component); ++ ++ return cam_info.num_cameras; ++} ++ ++static int set_camera_parameters(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *camera, ++ struct bm2835_mmal_dev *dev) ++{ ++ int ret; ++ struct mmal_parameter_camera_config cam_config = { ++ .max_stills_w = dev->max_width, ++ .max_stills_h = dev->max_height, ++ .stills_yuv422 = 1, ++ .one_shot_stills = 1, ++ .max_preview_video_w = (max_video_width > 1920) ? ++ max_video_width : 1920, ++ .max_preview_video_h = (max_video_height > 1088) ? ++ max_video_height : 1088, ++ .num_preview_video_frames = 3, ++ .stills_capture_circular_buffer_height = 0, ++ .fast_preview_resume = 0, ++ .use_stc_timestamp = MMAL_PARAM_TIMESTAMP_MODE_RAW_STC ++ }; ++ ++ ret = vchiq_mmal_port_parameter_set(instance, &camera->control, ++ MMAL_PARAMETER_CAMERA_CONFIG, ++ &cam_config, sizeof(cam_config)); ++ return ret; ++} ++ ++#define MAX_SUPPORTED_ENCODINGS 20 ++ ++/* MMAL instance and component init */ ++static int __init mmal_init(struct bm2835_mmal_dev *dev) ++{ ++ int ret; ++ struct mmal_es_format *format; ++ u32 bool_true = 1; ++ u32 supported_encodings[MAX_SUPPORTED_ENCODINGS]; ++ int param_size; ++ struct vchiq_mmal_component *camera; ++ ++ ret = vchiq_mmal_init(&dev->instance); ++ if (ret < 0) ++ return ret; ++ ++ /* get the camera component ready */ ++ ret = vchiq_mmal_component_init(dev->instance, "ril.camera", ++ &dev->component[MMAL_COMPONENT_CAMERA]); ++ if (ret < 0) ++ goto unreg_mmal; ++ ++ camera = dev->component[MMAL_COMPONENT_CAMERA]; ++ if (camera->outputs < MMAL_CAMERA_PORT_COUNT) { ++ ret = -EINVAL; ++ goto unreg_camera; ++ } ++ ++ ret = set_camera_parameters(dev->instance, ++ camera, ++ dev); ++ if (ret < 0) ++ goto unreg_camera; ++ ++ /* There was an error in the firmware that meant the camera component ++ * produced BGR instead of RGB. ++ * This is now fixed, but in order to support the old firmwares, we ++ * have to check. ++ */ ++ dev->rgb_bgr_swapped = true; ++ param_size = sizeof(supported_encodings); ++ ret = vchiq_mmal_port_parameter_get(dev->instance, ++ &camera->output[MMAL_CAMERA_PORT_CAPTURE], ++ MMAL_PARAMETER_SUPPORTED_ENCODINGS, ++ &supported_encodings, ++ ¶m_size); ++ if (ret == 0) { ++ int i; ++ ++ for (i = 0; i < param_size/sizeof(u32); i++) { ++ if (supported_encodings[i] == MMAL_ENCODING_BGR24) { ++ /* Found BGR24 first - old firmware. */ ++ break; ++ } ++ if (supported_encodings[i] == MMAL_ENCODING_RGB24) { ++ /* Found RGB24 first ++ * new firmware, so use RGB24. ++ */ ++ dev->rgb_bgr_swapped = false; ++ break; ++ } ++ } ++ } ++ format = &camera->output[MMAL_CAMERA_PORT_PREVIEW].format; ++ ++ format->encoding = MMAL_ENCODING_OPAQUE; ++ format->encoding_variant = MMAL_ENCODING_I420; ++ ++ format->es->video.width = 1024; ++ format->es->video.height = 768; ++ format->es->video.crop.x = 0; ++ format->es->video.crop.y = 0; ++ format->es->video.crop.width = 1024; ++ format->es->video.crop.height = 768; ++ format->es->video.frame_rate.num = 0; /* Rely on fps_range */ ++ format->es->video.frame_rate.den = 1; ++ ++ format = &camera->output[MMAL_CAMERA_PORT_VIDEO].format; ++ ++ format->encoding = MMAL_ENCODING_OPAQUE; ++ format->encoding_variant = MMAL_ENCODING_I420; ++ ++ format->es->video.width = 1024; ++ format->es->video.height = 768; ++ format->es->video.crop.x = 0; ++ format->es->video.crop.y = 0; ++ format->es->video.crop.width = 1024; ++ format->es->video.crop.height = 768; ++ format->es->video.frame_rate.num = 0; /* Rely on fps_range */ ++ format->es->video.frame_rate.den = 1; ++ ++ vchiq_mmal_port_parameter_set(dev->instance, ++ &camera->output[MMAL_CAMERA_PORT_VIDEO], ++ MMAL_PARAMETER_NO_IMAGE_PADDING, ++ &bool_true, sizeof(bool_true)); ++ ++ format = &camera->output[MMAL_CAMERA_PORT_CAPTURE].format; ++ ++ format->encoding = MMAL_ENCODING_OPAQUE; ++ ++ format->es->video.width = 2592; ++ format->es->video.height = 1944; ++ format->es->video.crop.x = 0; ++ format->es->video.crop.y = 0; ++ format->es->video.crop.width = 2592; ++ format->es->video.crop.height = 1944; ++ format->es->video.frame_rate.num = 0; /* Rely on fps_range */ ++ format->es->video.frame_rate.den = 1; ++ ++ dev->capture.width = format->es->video.width; ++ dev->capture.height = format->es->video.height; ++ dev->capture.fmt = &formats[0]; ++ dev->capture.encode_component = NULL; ++ dev->capture.timeperframe = tpf_default; ++ dev->capture.enc_profile = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH; ++ dev->capture.enc_level = V4L2_MPEG_VIDEO_H264_LEVEL_4_0; ++ ++ vchiq_mmal_port_parameter_set(dev->instance, ++ &camera->output[MMAL_CAMERA_PORT_CAPTURE], ++ MMAL_PARAMETER_NO_IMAGE_PADDING, ++ &bool_true, sizeof(bool_true)); ++ ++ /* get the preview component ready */ ++ ret = vchiq_mmal_component_init( ++ dev->instance, "ril.video_render", ++ &dev->component[MMAL_COMPONENT_PREVIEW]); ++ if (ret < 0) ++ goto unreg_camera; ++ ++ if (dev->component[MMAL_COMPONENT_PREVIEW]->inputs < 1) { ++ ret = -EINVAL; ++ pr_debug("too few input ports %d needed %d\n", ++ dev->component[MMAL_COMPONENT_PREVIEW]->inputs, 1); ++ goto unreg_preview; ++ } ++ ++ /* get the image encoder component ready */ ++ ret = vchiq_mmal_component_init( ++ dev->instance, "ril.image_encode", ++ &dev->component[MMAL_COMPONENT_IMAGE_ENCODE]); ++ if (ret < 0) ++ goto unreg_preview; ++ ++ if (dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs < 1) { ++ ret = -EINVAL; ++ v4l2_err(&dev->v4l2_dev, "too few input ports %d needed %d\n", ++ dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->inputs, ++ 1); ++ goto unreg_image_encoder; ++ } ++ ++ /* get the video encoder component ready */ ++ ret = vchiq_mmal_component_init(dev->instance, "ril.video_encode", ++ &dev-> ++ component[MMAL_COMPONENT_VIDEO_ENCODE]); ++ if (ret < 0) ++ goto unreg_image_encoder; ++ ++ if (dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs < 1) { ++ ret = -EINVAL; ++ v4l2_err(&dev->v4l2_dev, "too few input ports %d needed %d\n", ++ dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->inputs, ++ 1); ++ goto unreg_vid_encoder; ++ } ++ ++ { ++ struct vchiq_mmal_port *encoder_port = ++ &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; ++ encoder_port->format.encoding = MMAL_ENCODING_H264; ++ ret = vchiq_mmal_port_set_format(dev->instance, ++ encoder_port); ++ } ++ ++ { ++ unsigned int enable = 1; ++ vchiq_mmal_port_parameter_set( ++ dev->instance, ++ &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->control, ++ MMAL_PARAMETER_VIDEO_IMMUTABLE_INPUT, ++ &enable, sizeof(enable)); ++ ++ vchiq_mmal_port_parameter_set(dev->instance, ++ &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->control, ++ MMAL_PARAMETER_MINIMISE_FRAGMENTATION, ++ &enable, ++ sizeof(enable)); ++ } ++ ret = bm2835_mmal_set_all_camera_controls(dev); ++ if (ret < 0) ++ goto unreg_vid_encoder; ++ ++ return 0; ++ ++unreg_vid_encoder: ++ pr_err("Cleanup: Destroy video encoder\n"); ++ vchiq_mmal_component_finalise( ++ dev->instance, ++ dev->component[MMAL_COMPONENT_VIDEO_ENCODE]); ++ ++unreg_image_encoder: ++ pr_err("Cleanup: Destroy image encoder\n"); ++ vchiq_mmal_component_finalise( ++ dev->instance, ++ dev->component[MMAL_COMPONENT_IMAGE_ENCODE]); ++ ++unreg_preview: ++ pr_err("Cleanup: Destroy video render\n"); ++ vchiq_mmal_component_finalise(dev->instance, ++ dev->component[MMAL_COMPONENT_PREVIEW]); ++ ++unreg_camera: ++ pr_err("Cleanup: Destroy camera\n"); ++ vchiq_mmal_component_finalise(dev->instance, ++ dev->component[MMAL_COMPONENT_CAMERA]); ++ ++unreg_mmal: ++ vchiq_mmal_finalise(dev->instance); ++ return ret; ++} ++ ++static int __init bm2835_mmal_init_device(struct bm2835_mmal_dev *dev, ++ struct video_device *vfd) ++{ ++ int ret; ++ ++ *vfd = vdev_template; ++ if (gst_v4l2src_is_broken) { ++ v4l2_info(&dev->v4l2_dev, ++ "Work-around for gstreamer issue is active.\n"); ++ vfd->ioctl_ops = &camera0_ioctl_ops_gstreamer; ++ } ++ ++ vfd->v4l2_dev = &dev->v4l2_dev; ++ ++ vfd->lock = &dev->mutex; ++ ++ vfd->queue = &dev->capture.vb_vidq; ++ ++ /* video device needs to be able to access instance data */ ++ video_set_drvdata(vfd, dev); ++ ++ ret = video_register_device(vfd, ++ VFL_TYPE_GRABBER, ++ video_nr[dev->camera_num]); ++ if (ret < 0) ++ return ret; ++ ++ v4l2_info(vfd->v4l2_dev, ++ "V4L2 device registered as %s - stills mode > %dx%d\n", ++ video_device_node_name(vfd), max_video_width, max_video_height); ++ ++ return 0; ++} ++ ++void bcm2835_cleanup_instance(struct bm2835_mmal_dev *dev) ++{ ++ if (!dev) ++ return; ++ ++ v4l2_info(&dev->v4l2_dev, "unregistering %s\n", ++ video_device_node_name(&dev->vdev)); ++ ++ video_unregister_device(&dev->vdev); ++ ++ if (dev->capture.encode_component) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "mmal_exit - disconnect tunnel\n"); ++ vchiq_mmal_port_connect_tunnel(dev->instance, ++ dev->capture.camera_port, NULL); ++ vchiq_mmal_component_disable(dev->instance, ++ dev->capture.encode_component); ++ } ++ vchiq_mmal_component_disable(dev->instance, ++ dev->component[MMAL_COMPONENT_CAMERA]); ++ ++ vchiq_mmal_component_finalise(dev->instance, ++ dev-> ++ component[MMAL_COMPONENT_VIDEO_ENCODE]); ++ ++ vchiq_mmal_component_finalise(dev->instance, ++ dev-> ++ component[MMAL_COMPONENT_IMAGE_ENCODE]); ++ ++ vchiq_mmal_component_finalise(dev->instance, ++ dev->component[MMAL_COMPONENT_PREVIEW]); ++ ++ vchiq_mmal_component_finalise(dev->instance, ++ dev->component[MMAL_COMPONENT_CAMERA]); ++ ++ v4l2_ctrl_handler_free(&dev->ctrl_handler); ++ ++ v4l2_device_unregister(&dev->v4l2_dev); ++ ++ kfree(dev); ++} ++ ++static struct v4l2_format default_v4l2_format = { ++ .fmt.pix.pixelformat = V4L2_PIX_FMT_JPEG, ++ .fmt.pix.width = 1024, ++ .fmt.pix.bytesperline = 0, ++ .fmt.pix.height = 768, ++ .fmt.pix.sizeimage = 1024*768, ++}; ++ ++static int __init bm2835_mmal_init(void) ++{ ++ int ret; ++ struct bm2835_mmal_dev *dev; ++ struct vb2_queue *q; ++ int camera; ++ unsigned int num_cameras; ++ struct vchiq_mmal_instance *instance; ++ unsigned int resolutions[MAX_BCM2835_CAMERAS][2]; ++ ++ ret = vchiq_mmal_init(&instance); ++ if (ret < 0) ++ return ret; ++ ++ num_cameras = get_num_cameras(instance, ++ resolutions, ++ MAX_BCM2835_CAMERAS); ++ if (num_cameras > MAX_BCM2835_CAMERAS) ++ num_cameras = MAX_BCM2835_CAMERAS; ++ ++ for (camera = 0; camera < num_cameras; camera++) { ++ dev = kzalloc(sizeof(struct bm2835_mmal_dev), GFP_KERNEL); ++ if (!dev) ++ return -ENOMEM; ++ ++ dev->camera_num = camera; ++ dev->max_width = resolutions[camera][0]; ++ dev->max_height = resolutions[camera][1]; ++ ++ /* setup device defaults */ ++ dev->overlay.w.left = 150; ++ dev->overlay.w.top = 50; ++ dev->overlay.w.width = 1024; ++ dev->overlay.w.height = 768; ++ dev->overlay.clipcount = 0; ++ dev->overlay.field = V4L2_FIELD_NONE; ++ dev->overlay.global_alpha = 255; ++ ++ dev->capture.fmt = &formats[3]; /* JPEG */ ++ ++ /* v4l device registration */ ++ snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name), ++ "%s", BM2835_MMAL_MODULE_NAME); ++ ret = v4l2_device_register(NULL, &dev->v4l2_dev); ++ if (ret) ++ goto free_dev; ++ ++ /* setup v4l controls */ ++ ret = bm2835_mmal_init_controls(dev, &dev->ctrl_handler); ++ if (ret < 0) ++ goto unreg_dev; ++ dev->v4l2_dev.ctrl_handler = &dev->ctrl_handler; ++ ++ /* mmal init */ ++ dev->instance = instance; ++ ret = mmal_init(dev); ++ if (ret < 0) ++ goto unreg_dev; ++ ++ /* initialize queue */ ++ q = &dev->capture.vb_vidq; ++ memset(q, 0, sizeof(*q)); ++ q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; ++ q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ; ++ q->drv_priv = dev; ++ q->buf_struct_size = sizeof(struct mmal_buffer); ++ q->ops = &bm2835_mmal_video_qops; ++ q->mem_ops = &vb2_vmalloc_memops; ++ q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; ++ ret = vb2_queue_init(q); ++ if (ret < 0) ++ goto unreg_dev; ++ ++ /* v4l2 core mutex used to protect all fops and v4l2 ioctls. */ ++ mutex_init(&dev->mutex); ++ ++ /* initialise video devices */ ++ ret = bm2835_mmal_init_device(dev, &dev->vdev); ++ if (ret < 0) ++ goto unreg_dev; ++ ++ /* Really want to call vidioc_s_fmt_vid_cap with the default ++ * format, but currently the APIs don't join up. ++ */ ++ ret = mmal_setup_components(dev, &default_v4l2_format); ++ if (ret < 0) { ++ v4l2_err(&dev->v4l2_dev, ++ "%s: could not setup components\n", __func__); ++ goto unreg_dev; ++ } ++ ++ v4l2_info(&dev->v4l2_dev, ++ "Broadcom 2835 MMAL video capture ver %s loaded.\n", ++ BM2835_MMAL_VERSION); ++ ++ gdev[camera] = dev; ++ } ++ return 0; ++ ++unreg_dev: ++ v4l2_ctrl_handler_free(&dev->ctrl_handler); ++ v4l2_device_unregister(&dev->v4l2_dev); ++ ++free_dev: ++ kfree(dev); ++ ++ for ( ; camera > 0; camera--) { ++ bcm2835_cleanup_instance(gdev[camera]); ++ gdev[camera] = NULL; ++ } ++ pr_info("%s: error %d while loading driver\n", ++ BM2835_MMAL_MODULE_NAME, ret); ++ ++ return ret; ++} ++ ++static void __exit bm2835_mmal_exit(void) ++{ ++ int camera; ++ struct vchiq_mmal_instance *instance = gdev[0]->instance; ++ ++ for (camera = 0; camera < MAX_BCM2835_CAMERAS; camera++) { ++ bcm2835_cleanup_instance(gdev[camera]); ++ gdev[camera] = NULL; ++ } ++ vchiq_mmal_finalise(instance); ++} ++ ++module_init(bm2835_mmal_init); ++module_exit(bm2835_mmal_exit); +--- /dev/null ++++ b/drivers/media/platform/bcm2835/bcm2835-camera.h +@@ -0,0 +1,145 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ * ++ * core driver device ++ */ ++ ++#define V4L2_CTRL_COUNT 29 /* number of v4l controls */ ++ ++enum { ++ MMAL_COMPONENT_CAMERA = 0, ++ MMAL_COMPONENT_PREVIEW, ++ MMAL_COMPONENT_IMAGE_ENCODE, ++ MMAL_COMPONENT_VIDEO_ENCODE, ++ MMAL_COMPONENT_COUNT ++}; ++ ++enum { ++ MMAL_CAMERA_PORT_PREVIEW = 0, ++ MMAL_CAMERA_PORT_VIDEO, ++ MMAL_CAMERA_PORT_CAPTURE, ++ MMAL_CAMERA_PORT_COUNT ++}; ++ ++#define PREVIEW_LAYER 2 ++ ++extern int bcm2835_v4l2_debug; ++ ++struct bm2835_mmal_dev { ++ /* v4l2 devices */ ++ struct v4l2_device v4l2_dev; ++ struct video_device vdev; ++ struct mutex mutex; ++ ++ /* controls */ ++ struct v4l2_ctrl_handler ctrl_handler; ++ struct v4l2_ctrl *ctrls[V4L2_CTRL_COUNT]; ++ enum v4l2_scene_mode scene_mode; ++ struct mmal_colourfx colourfx; ++ int hflip; ++ int vflip; ++ int red_gain; ++ int blue_gain; ++ enum mmal_parameter_exposuremode exposure_mode_user; ++ enum v4l2_exposure_auto_type exposure_mode_v4l2_user; ++ /* active exposure mode may differ if selected via a scene mode */ ++ enum mmal_parameter_exposuremode exposure_mode_active; ++ enum mmal_parameter_exposuremeteringmode metering_mode; ++ unsigned int manual_shutter_speed; ++ bool exp_auto_priority; ++ bool manual_iso_enabled; ++ uint32_t iso; ++ ++ /* allocated mmal instance and components */ ++ struct vchiq_mmal_instance *instance; ++ struct vchiq_mmal_component *component[MMAL_COMPONENT_COUNT]; ++ int camera_use_count; ++ ++ struct v4l2_window overlay; ++ ++ struct { ++ unsigned int width; /* width */ ++ unsigned int height; /* height */ ++ unsigned int stride; /* stride */ ++ unsigned int buffersize; /* buffer size with padding */ ++ struct mmal_fmt *fmt; ++ struct v4l2_fract timeperframe; ++ ++ /* H264 encode bitrate */ ++ int encode_bitrate; ++ /* H264 bitrate mode. CBR/VBR */ ++ int encode_bitrate_mode; ++ /* H264 profile */ ++ enum v4l2_mpeg_video_h264_profile enc_profile; ++ /* H264 level */ ++ enum v4l2_mpeg_video_h264_level enc_level; ++ /* JPEG Q-factor */ ++ int q_factor; ++ ++ struct vb2_queue vb_vidq; ++ ++ /* VC start timestamp for streaming */ ++ s64 vc_start_timestamp; ++ /* Kernel start timestamp for streaming */ ++ struct timeval kernel_start_ts; ++ ++ struct vchiq_mmal_port *port; /* port being used for capture */ ++ /* camera port being used for capture */ ++ struct vchiq_mmal_port *camera_port; ++ /* component being used for encode */ ++ struct vchiq_mmal_component *encode_component; ++ /* number of frames remaining which driver should capture */ ++ unsigned int frame_count; ++ /* last frame completion */ ++ struct completion frame_cmplt; ++ ++ } capture; ++ ++ unsigned int camera_num; ++ unsigned int max_width; ++ unsigned int max_height; ++ unsigned int rgb_bgr_swapped; ++}; ++ ++int bm2835_mmal_init_controls( ++ struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl_handler *hdl); ++ ++int bm2835_mmal_set_all_camera_controls(struct bm2835_mmal_dev *dev); ++int set_framerate_params(struct bm2835_mmal_dev *dev); ++ ++/* Debug helpers */ ++ ++#define v4l2_dump_pix_format(level, debug, dev, pix_fmt, desc) \ ++{ \ ++ v4l2_dbg(level, debug, dev, \ ++"%s: w %u h %u field %u pfmt 0x%x bpl %u sz_img %u colorspace 0x%x priv %u\n", \ ++ desc == NULL ? "" : desc, \ ++ (pix_fmt)->width, (pix_fmt)->height, (pix_fmt)->field, \ ++ (pix_fmt)->pixelformat, (pix_fmt)->bytesperline, \ ++ (pix_fmt)->sizeimage, (pix_fmt)->colorspace, (pix_fmt)->priv); \ ++} ++#define v4l2_dump_win_format(level, debug, dev, win_fmt, desc) \ ++{ \ ++ v4l2_dbg(level, debug, dev, \ ++"%s: w %u h %u l %u t %u field %u chromakey %06X clip %p " \ ++"clipcount %u bitmap %p\n", \ ++ desc == NULL ? "" : desc, \ ++ (win_fmt)->w.width, (win_fmt)->w.height, \ ++ (win_fmt)->w.left, (win_fmt)->w.top, \ ++ (win_fmt)->field, \ ++ (win_fmt)->chromakey, \ ++ (win_fmt)->clips, (win_fmt)->clipcount, \ ++ (win_fmt)->bitmap); \ ++} +--- /dev/null ++++ b/drivers/media/platform/bcm2835/controls.c +@@ -0,0 +1,1345 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "mmal-common.h" ++#include "mmal-vchiq.h" ++#include "mmal-parameters.h" ++#include "bcm2835-camera.h" ++ ++/* The supported V4L2_CID_AUTO_EXPOSURE_BIAS values are from -4.0 to +4.0. ++ * MMAL values are in 1/6th increments so the MMAL range is -24 to +24. ++ * V4L2 docs say value "is expressed in terms of EV, drivers should interpret ++ * the values as 0.001 EV units, where the value 1000 stands for +1 EV." ++ * V4L2 is limited to a max of 32 values in a menu, so count in 1/3rds from ++ * -4 to +4 ++ */ ++static const s64 ev_bias_qmenu[] = { ++ -4000, -3667, -3333, ++ -3000, -2667, -2333, ++ -2000, -1667, -1333, ++ -1000, -667, -333, ++ 0, 333, 667, ++ 1000, 1333, 1667, ++ 2000, 2333, 2667, ++ 3000, 3333, 3667, ++ 4000 ++}; ++ ++/* Supported ISO values (*1000) ++ * ISOO = auto ISO ++ */ ++static const s64 iso_qmenu[] = { ++ 0, 100000, 200000, 400000, 800000, ++}; ++static const uint32_t iso_values[] = { ++ 0, 100, 200, 400, 800, ++}; ++ ++static const s64 mains_freq_qmenu[] = { ++ V4L2_CID_POWER_LINE_FREQUENCY_DISABLED, ++ V4L2_CID_POWER_LINE_FREQUENCY_50HZ, ++ V4L2_CID_POWER_LINE_FREQUENCY_60HZ, ++ V4L2_CID_POWER_LINE_FREQUENCY_AUTO ++}; ++ ++/* Supported video encode modes */ ++static const s64 bitrate_mode_qmenu[] = { ++ (s64)V4L2_MPEG_VIDEO_BITRATE_MODE_VBR, ++ (s64)V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, ++}; ++ ++enum bm2835_mmal_ctrl_type { ++ MMAL_CONTROL_TYPE_STD, ++ MMAL_CONTROL_TYPE_STD_MENU, ++ MMAL_CONTROL_TYPE_INT_MENU, ++ MMAL_CONTROL_TYPE_CLUSTER, /* special cluster entry */ ++}; ++ ++struct bm2835_mmal_v4l2_ctrl; ++ ++typedef int(bm2835_mmal_v4l2_ctrl_cb)( ++ struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl); ++ ++struct bm2835_mmal_v4l2_ctrl { ++ u32 id; /* v4l2 control identifier */ ++ enum bm2835_mmal_ctrl_type type; ++ /* control minimum value or ++ * mask for MMAL_CONTROL_TYPE_STD_MENU */ ++ s32 min; ++ s32 max; /* maximum value of control */ ++ s32 def; /* default value of control */ ++ s32 step; /* step size of the control */ ++ const s64 *imenu; /* integer menu array */ ++ u32 mmal_id; /* mmal parameter id */ ++ bm2835_mmal_v4l2_ctrl_cb *setter; ++ bool ignore_errors; ++}; ++ ++struct v4l2_to_mmal_effects_setting { ++ u32 v4l2_effect; ++ u32 mmal_effect; ++ s32 col_fx_enable; ++ s32 col_fx_fixed_cbcr; ++ u32 u; ++ u32 v; ++ u32 num_effect_params; ++ u32 effect_params[MMAL_MAX_IMAGEFX_PARAMETERS]; ++}; ++ ++static const struct v4l2_to_mmal_effects_setting ++ v4l2_to_mmal_effects_values[] = { ++ { V4L2_COLORFX_NONE, MMAL_PARAM_IMAGEFX_NONE, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_BW, MMAL_PARAM_IMAGEFX_NONE, ++ 1, 0, 128, 128, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_SEPIA, MMAL_PARAM_IMAGEFX_NONE, ++ 1, 0, 87, 151, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_NEGATIVE, MMAL_PARAM_IMAGEFX_NEGATIVE, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_EMBOSS, MMAL_PARAM_IMAGEFX_EMBOSS, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_SKETCH, MMAL_PARAM_IMAGEFX_SKETCH, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_SKY_BLUE, MMAL_PARAM_IMAGEFX_PASTEL, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_GRASS_GREEN, MMAL_PARAM_IMAGEFX_WATERCOLOUR, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_SKIN_WHITEN, MMAL_PARAM_IMAGEFX_WASHEDOUT, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_VIVID, MMAL_PARAM_IMAGEFX_SATURATION, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_AQUA, MMAL_PARAM_IMAGEFX_NONE, ++ 1, 0, 171, 121, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_ART_FREEZE, MMAL_PARAM_IMAGEFX_HATCH, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_SILHOUETTE, MMAL_PARAM_IMAGEFX_FILM, ++ 0, 0, 0, 0, 0, {0, 0, 0, 0, 0} }, ++ { V4L2_COLORFX_SOLARIZATION, MMAL_PARAM_IMAGEFX_SOLARIZE, ++ 0, 0, 0, 0, 5, {1, 128, 160, 160, 48} }, ++ { V4L2_COLORFX_ANTIQUE, MMAL_PARAM_IMAGEFX_COLOURBALANCE, ++ 0, 0, 0, 0, 3, {108, 274, 238, 0, 0} }, ++ { V4L2_COLORFX_SET_CBCR, MMAL_PARAM_IMAGEFX_NONE, ++ 1, 1, 0, 0, 0, {0, 0, 0, 0, 0} } ++}; ++ ++struct v4l2_mmal_scene_config { ++ enum v4l2_scene_mode v4l2_scene; ++ enum mmal_parameter_exposuremode exposure_mode; ++ enum mmal_parameter_exposuremeteringmode metering_mode; ++}; ++ ++static const struct v4l2_mmal_scene_config scene_configs[] = { ++ /* V4L2_SCENE_MODE_NONE automatically added */ ++ { ++ V4L2_SCENE_MODE_NIGHT, ++ MMAL_PARAM_EXPOSUREMODE_NIGHT, ++ MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE ++ }, ++ { ++ V4L2_SCENE_MODE_SPORTS, ++ MMAL_PARAM_EXPOSUREMODE_SPORTS, ++ MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE ++ }, ++}; ++ ++/* control handlers*/ ++ ++static int ctrl_set_rational(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ struct mmal_parameter_rational rational_value; ++ struct vchiq_mmal_port *control; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ rational_value.num = ctrl->val; ++ rational_value.den = 100; ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, control, ++ mmal_ctrl->mmal_id, ++ &rational_value, ++ sizeof(rational_value)); ++} ++ ++static int ctrl_set_value(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ u32 u32_value; ++ struct vchiq_mmal_port *control; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ u32_value = ctrl->val; ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, control, ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++} ++ ++static int ctrl_set_iso(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ u32 u32_value; ++ struct vchiq_mmal_port *control; ++ ++ if (ctrl->val > mmal_ctrl->max || ctrl->val < mmal_ctrl->min) ++ return 1; ++ ++ if (ctrl->id == V4L2_CID_ISO_SENSITIVITY) ++ dev->iso = iso_values[ctrl->val]; ++ else if (ctrl->id == V4L2_CID_ISO_SENSITIVITY_AUTO) ++ dev->manual_iso_enabled = ++ (ctrl->val == V4L2_ISO_SENSITIVITY_MANUAL ? ++ true : ++ false); ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ if (dev->manual_iso_enabled) ++ u32_value = dev->iso; ++ else ++ u32_value = 0; ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, control, ++ MMAL_PARAMETER_ISO, ++ &u32_value, sizeof(u32_value)); ++} ++ ++static int ctrl_set_value_ev(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ s32 s32_value; ++ struct vchiq_mmal_port *control; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ s32_value = (ctrl->val-12)*2; /* Convert from index to 1/6ths */ ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, control, ++ mmal_ctrl->mmal_id, ++ &s32_value, sizeof(s32_value)); ++} ++ ++static int ctrl_set_rotate(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ int ret; ++ u32 u32_value; ++ struct vchiq_mmal_component *camera; ++ ++ camera = dev->component[MMAL_COMPONENT_CAMERA]; ++ ++ u32_value = ((ctrl->val % 360) / 90) * 90; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[0], ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++ if (ret < 0) ++ return ret; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[1], ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++ if (ret < 0) ++ return ret; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[2], ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++ ++ return ret; ++} ++ ++static int ctrl_set_flip(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ int ret; ++ u32 u32_value; ++ struct vchiq_mmal_component *camera; ++ ++ if (ctrl->id == V4L2_CID_HFLIP) ++ dev->hflip = ctrl->val; ++ else ++ dev->vflip = ctrl->val; ++ ++ camera = dev->component[MMAL_COMPONENT_CAMERA]; ++ ++ if (dev->hflip && dev->vflip) ++ u32_value = MMAL_PARAM_MIRROR_BOTH; ++ else if (dev->hflip) ++ u32_value = MMAL_PARAM_MIRROR_HORIZONTAL; ++ else if (dev->vflip) ++ u32_value = MMAL_PARAM_MIRROR_VERTICAL; ++ else ++ u32_value = MMAL_PARAM_MIRROR_NONE; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[0], ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++ if (ret < 0) ++ return ret; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[1], ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++ if (ret < 0) ++ return ret; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, &camera->output[2], ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++ ++ return ret; ++ ++} ++ ++static int ctrl_set_exposure(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ enum mmal_parameter_exposuremode exp_mode = dev->exposure_mode_user; ++ u32 shutter_speed = 0; ++ struct vchiq_mmal_port *control; ++ int ret = 0; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ if (mmal_ctrl->mmal_id == MMAL_PARAMETER_SHUTTER_SPEED) { ++ /* V4L2 is in 100usec increments. ++ * MMAL is 1usec. ++ */ ++ dev->manual_shutter_speed = ctrl->val * 100; ++ } else if (mmal_ctrl->mmal_id == MMAL_PARAMETER_EXPOSURE_MODE) { ++ switch (ctrl->val) { ++ case V4L2_EXPOSURE_AUTO: ++ exp_mode = MMAL_PARAM_EXPOSUREMODE_AUTO; ++ break; ++ ++ case V4L2_EXPOSURE_MANUAL: ++ exp_mode = MMAL_PARAM_EXPOSUREMODE_OFF; ++ break; ++ } ++ dev->exposure_mode_user = exp_mode; ++ dev->exposure_mode_v4l2_user = ctrl->val; ++ } else if (mmal_ctrl->id == V4L2_CID_EXPOSURE_AUTO_PRIORITY) { ++ dev->exp_auto_priority = ctrl->val; ++ } ++ ++ if (dev->scene_mode == V4L2_SCENE_MODE_NONE) { ++ if (exp_mode == MMAL_PARAM_EXPOSUREMODE_OFF) ++ shutter_speed = dev->manual_shutter_speed; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, ++ control, ++ MMAL_PARAMETER_SHUTTER_SPEED, ++ &shutter_speed, ++ sizeof(shutter_speed)); ++ ret += vchiq_mmal_port_parameter_set(dev->instance, ++ control, ++ MMAL_PARAMETER_EXPOSURE_MODE, ++ &exp_mode, ++ sizeof(u32)); ++ dev->exposure_mode_active = exp_mode; ++ } ++ /* exposure_dynamic_framerate (V4L2_CID_EXPOSURE_AUTO_PRIORITY) should ++ * always apply irrespective of scene mode. ++ */ ++ ret += set_framerate_params(dev); ++ ++ return ret; ++} ++ ++static int ctrl_set_metering_mode(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ switch (ctrl->val) { ++ case V4L2_EXPOSURE_METERING_AVERAGE: ++ dev->metering_mode = MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE; ++ break; ++ ++ case V4L2_EXPOSURE_METERING_CENTER_WEIGHTED: ++ dev->metering_mode = MMAL_PARAM_EXPOSUREMETERINGMODE_BACKLIT; ++ break; ++ ++ case V4L2_EXPOSURE_METERING_SPOT: ++ dev->metering_mode = MMAL_PARAM_EXPOSUREMETERINGMODE_SPOT; ++ break; ++ ++ /* todo matrix weighting not added to Linux API till 3.9 ++ case V4L2_EXPOSURE_METERING_MATRIX: ++ dev->metering_mode = MMAL_PARAM_EXPOSUREMETERINGMODE_MATRIX; ++ break; ++ */ ++ ++ } ++ ++ if (dev->scene_mode == V4L2_SCENE_MODE_NONE) { ++ struct vchiq_mmal_port *control; ++ u32 u32_value = dev->metering_mode; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, control, ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++ } else ++ return 0; ++} ++ ++static int ctrl_set_flicker_avoidance(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ u32 u32_value; ++ struct vchiq_mmal_port *control; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ switch (ctrl->val) { ++ case V4L2_CID_POWER_LINE_FREQUENCY_DISABLED: ++ u32_value = MMAL_PARAM_FLICKERAVOID_OFF; ++ break; ++ case V4L2_CID_POWER_LINE_FREQUENCY_50HZ: ++ u32_value = MMAL_PARAM_FLICKERAVOID_50HZ; ++ break; ++ case V4L2_CID_POWER_LINE_FREQUENCY_60HZ: ++ u32_value = MMAL_PARAM_FLICKERAVOID_60HZ; ++ break; ++ case V4L2_CID_POWER_LINE_FREQUENCY_AUTO: ++ u32_value = MMAL_PARAM_FLICKERAVOID_AUTO; ++ break; ++ } ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, control, ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++} ++ ++static int ctrl_set_awb_mode(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ u32 u32_value; ++ struct vchiq_mmal_port *control; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ switch (ctrl->val) { ++ case V4L2_WHITE_BALANCE_MANUAL: ++ u32_value = MMAL_PARAM_AWBMODE_OFF; ++ break; ++ ++ case V4L2_WHITE_BALANCE_AUTO: ++ u32_value = MMAL_PARAM_AWBMODE_AUTO; ++ break; ++ ++ case V4L2_WHITE_BALANCE_INCANDESCENT: ++ u32_value = MMAL_PARAM_AWBMODE_INCANDESCENT; ++ break; ++ ++ case V4L2_WHITE_BALANCE_FLUORESCENT: ++ u32_value = MMAL_PARAM_AWBMODE_FLUORESCENT; ++ break; ++ ++ case V4L2_WHITE_BALANCE_FLUORESCENT_H: ++ u32_value = MMAL_PARAM_AWBMODE_TUNGSTEN; ++ break; ++ ++ case V4L2_WHITE_BALANCE_HORIZON: ++ u32_value = MMAL_PARAM_AWBMODE_HORIZON; ++ break; ++ ++ case V4L2_WHITE_BALANCE_DAYLIGHT: ++ u32_value = MMAL_PARAM_AWBMODE_SUNLIGHT; ++ break; ++ ++ case V4L2_WHITE_BALANCE_FLASH: ++ u32_value = MMAL_PARAM_AWBMODE_FLASH; ++ break; ++ ++ case V4L2_WHITE_BALANCE_CLOUDY: ++ u32_value = MMAL_PARAM_AWBMODE_CLOUDY; ++ break; ++ ++ case V4L2_WHITE_BALANCE_SHADE: ++ u32_value = MMAL_PARAM_AWBMODE_SHADE; ++ break; ++ ++ } ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, control, ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++} ++ ++static int ctrl_set_awb_gains(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ struct vchiq_mmal_port *control; ++ struct mmal_parameter_awbgains gains; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ if (ctrl->id == V4L2_CID_RED_BALANCE) ++ dev->red_gain = ctrl->val; ++ else if (ctrl->id == V4L2_CID_BLUE_BALANCE) ++ dev->blue_gain = ctrl->val; ++ ++ gains.r_gain.num = dev->red_gain; ++ gains.b_gain.num = dev->blue_gain; ++ gains.r_gain.den = gains.b_gain.den = 1000; ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, control, ++ mmal_ctrl->mmal_id, ++ &gains, sizeof(gains)); ++} ++ ++static int ctrl_set_image_effect(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ int ret = -EINVAL; ++ int i, j; ++ struct vchiq_mmal_port *control; ++ struct mmal_parameter_imagefx_parameters imagefx; ++ ++ for (i = 0; i < ARRAY_SIZE(v4l2_to_mmal_effects_values); i++) { ++ if (ctrl->val == v4l2_to_mmal_effects_values[i].v4l2_effect) { ++ ++ imagefx.effect = ++ v4l2_to_mmal_effects_values[i].mmal_effect; ++ imagefx.num_effect_params = ++ v4l2_to_mmal_effects_values[i].num_effect_params; ++ ++ if (imagefx.num_effect_params > MMAL_MAX_IMAGEFX_PARAMETERS) ++ imagefx.num_effect_params = MMAL_MAX_IMAGEFX_PARAMETERS; ++ ++ for (j = 0; j < imagefx.num_effect_params; j++) ++ imagefx.effect_parameter[j] = ++ v4l2_to_mmal_effects_values[i].effect_params[j]; ++ ++ dev->colourfx.enable = ++ v4l2_to_mmal_effects_values[i].col_fx_enable; ++ if (!v4l2_to_mmal_effects_values[i].col_fx_fixed_cbcr) { ++ dev->colourfx.u = ++ v4l2_to_mmal_effects_values[i].u; ++ dev->colourfx.v = ++ v4l2_to_mmal_effects_values[i].v; ++ } ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ ret = vchiq_mmal_port_parameter_set( ++ dev->instance, control, ++ MMAL_PARAMETER_IMAGE_EFFECT_PARAMETERS, ++ &imagefx, sizeof(imagefx)); ++ if (ret) ++ goto exit; ++ ++ ret = vchiq_mmal_port_parameter_set( ++ dev->instance, control, ++ MMAL_PARAMETER_COLOUR_EFFECT, ++ &dev->colourfx, sizeof(dev->colourfx)); ++ } ++ } ++ ++exit: ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "mmal_ctrl:%p ctrl id:0x%x ctrl val:%d imagefx:0x%x color_effect:%s u:%d v:%d ret %d(%d)\n", ++ mmal_ctrl, ctrl->id, ctrl->val, imagefx.effect, ++ dev->colourfx.enable ? "true" : "false", ++ dev->colourfx.u, dev->colourfx.v, ++ ret, (ret == 0 ? 0 : -EINVAL)); ++ return (ret == 0 ? 0 : EINVAL); ++} ++ ++static int ctrl_set_colfx(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ int ret = -EINVAL; ++ struct vchiq_mmal_port *control; ++ ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ dev->colourfx.enable = (ctrl->val & 0xff00) >> 8; ++ dev->colourfx.enable = ctrl->val & 0xff; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, control, ++ MMAL_PARAMETER_COLOUR_EFFECT, ++ &dev->colourfx, sizeof(dev->colourfx)); ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "%s: After: mmal_ctrl:%p ctrl id:0x%x ctrl val:%d ret %d(%d)\n", ++ __func__, mmal_ctrl, ctrl->id, ctrl->val, ret, ++ (ret == 0 ? 0 : -EINVAL)); ++ return (ret == 0 ? 0 : EINVAL); ++} ++ ++static int ctrl_set_bitrate(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ int ret; ++ struct vchiq_mmal_port *encoder_out; ++ ++ dev->capture.encode_bitrate = ctrl->val; ++ ++ encoder_out = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, encoder_out, ++ mmal_ctrl->mmal_id, ++ &ctrl->val, sizeof(ctrl->val)); ++ ret = 0; ++ return ret; ++} ++ ++static int ctrl_set_bitrate_mode(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ u32 bitrate_mode; ++ struct vchiq_mmal_port *encoder_out; ++ ++ encoder_out = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; ++ ++ dev->capture.encode_bitrate_mode = ctrl->val; ++ switch (ctrl->val) { ++ default: ++ case V4L2_MPEG_VIDEO_BITRATE_MODE_VBR: ++ bitrate_mode = MMAL_VIDEO_RATECONTROL_VARIABLE; ++ break; ++ case V4L2_MPEG_VIDEO_BITRATE_MODE_CBR: ++ bitrate_mode = MMAL_VIDEO_RATECONTROL_CONSTANT; ++ break; ++ } ++ ++ vchiq_mmal_port_parameter_set(dev->instance, encoder_out, ++ mmal_ctrl->mmal_id, ++ &bitrate_mode, ++ sizeof(bitrate_mode)); ++ return 0; ++} ++ ++static int ctrl_set_image_encode_output(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ u32 u32_value; ++ struct vchiq_mmal_port *jpeg_out; ++ ++ jpeg_out = &dev->component[MMAL_COMPONENT_IMAGE_ENCODE]->output[0]; ++ ++ u32_value = ctrl->val; ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, jpeg_out, ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++} ++ ++static int ctrl_set_video_encode_param_output(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ u32 u32_value; ++ struct vchiq_mmal_port *vid_enc_ctl; ++ ++ vid_enc_ctl = &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0]; ++ ++ u32_value = ctrl->val; ++ ++ return vchiq_mmal_port_parameter_set(dev->instance, vid_enc_ctl, ++ mmal_ctrl->mmal_id, ++ &u32_value, sizeof(u32_value)); ++} ++ ++static int ctrl_set_video_encode_profile_level(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ struct mmal_parameter_video_profile param; ++ int ret = 0; ++ ++ if (ctrl->id == V4L2_CID_MPEG_VIDEO_H264_PROFILE) { ++ switch (ctrl->val) { ++ case V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE: ++ case V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE: ++ case V4L2_MPEG_VIDEO_H264_PROFILE_MAIN: ++ case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH: ++ dev->capture.enc_profile = ctrl->val; ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ } else if (ctrl->id == V4L2_CID_MPEG_VIDEO_H264_LEVEL) { ++ switch (ctrl->val) { ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_0: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1B: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_1: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_2: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_3: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_2_0: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_2_1: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_2_2: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_3_0: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_3_1: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_3_2: ++ case V4L2_MPEG_VIDEO_H264_LEVEL_4_0: ++ dev->capture.enc_level = ctrl->val; ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ } ++ ++ if (!ret) { ++ switch (dev->capture.enc_profile) { ++ case V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE: ++ param.profile = MMAL_VIDEO_PROFILE_H264_BASELINE; ++ break; ++ case V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE: ++ param.profile = ++ MMAL_VIDEO_PROFILE_H264_CONSTRAINED_BASELINE; ++ break; ++ case V4L2_MPEG_VIDEO_H264_PROFILE_MAIN: ++ param.profile = MMAL_VIDEO_PROFILE_H264_MAIN; ++ break; ++ case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH: ++ param.profile = MMAL_VIDEO_PROFILE_H264_HIGH; ++ break; ++ default: ++ /* Should never get here */ ++ break; ++ } ++ ++ switch (dev->capture.enc_level) { ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_0: ++ param.level = MMAL_VIDEO_LEVEL_H264_1; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1B: ++ param.level = MMAL_VIDEO_LEVEL_H264_1b; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_1: ++ param.level = MMAL_VIDEO_LEVEL_H264_11; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_2: ++ param.level = MMAL_VIDEO_LEVEL_H264_12; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_1_3: ++ param.level = MMAL_VIDEO_LEVEL_H264_13; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_2_0: ++ param.level = MMAL_VIDEO_LEVEL_H264_2; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_2_1: ++ param.level = MMAL_VIDEO_LEVEL_H264_21; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_2_2: ++ param.level = MMAL_VIDEO_LEVEL_H264_22; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_3_0: ++ param.level = MMAL_VIDEO_LEVEL_H264_3; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_3_1: ++ param.level = MMAL_VIDEO_LEVEL_H264_31; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_3_2: ++ param.level = MMAL_VIDEO_LEVEL_H264_32; ++ break; ++ case V4L2_MPEG_VIDEO_H264_LEVEL_4_0: ++ param.level = MMAL_VIDEO_LEVEL_H264_4; ++ break; ++ default: ++ /* Should never get here */ ++ break; ++ } ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, ++ &dev->component[MMAL_COMPONENT_VIDEO_ENCODE]->output[0], ++ mmal_ctrl->mmal_id, ++ ¶m, sizeof(param)); ++ } ++ return ret; ++} ++ ++static int ctrl_set_scene_mode(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl *ctrl, ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl) ++{ ++ int ret = 0; ++ int shutter_speed; ++ struct vchiq_mmal_port *control; ++ ++ v4l2_dbg(0, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "scene mode selected %d, was %d\n", ctrl->val, ++ dev->scene_mode); ++ control = &dev->component[MMAL_COMPONENT_CAMERA]->control; ++ ++ if (ctrl->val == dev->scene_mode) ++ return 0; ++ ++ if (ctrl->val == V4L2_SCENE_MODE_NONE) { ++ /* Restore all user selections */ ++ dev->scene_mode = V4L2_SCENE_MODE_NONE; ++ ++ if (dev->exposure_mode_user == MMAL_PARAM_EXPOSUREMODE_OFF) ++ shutter_speed = dev->manual_shutter_speed; ++ else ++ shutter_speed = 0; ++ ++ v4l2_dbg(0, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "%s: scene mode none: shut_speed %d, exp_mode %d, metering %d\n", ++ __func__, shutter_speed, dev->exposure_mode_user, ++ dev->metering_mode); ++ ret = vchiq_mmal_port_parameter_set(dev->instance, ++ control, ++ MMAL_PARAMETER_SHUTTER_SPEED, ++ &shutter_speed, ++ sizeof(shutter_speed)); ++ ret += vchiq_mmal_port_parameter_set(dev->instance, ++ control, ++ MMAL_PARAMETER_EXPOSURE_MODE, ++ &dev->exposure_mode_user, ++ sizeof(u32)); ++ dev->exposure_mode_active = dev->exposure_mode_user; ++ ret += vchiq_mmal_port_parameter_set(dev->instance, ++ control, ++ MMAL_PARAMETER_EXP_METERING_MODE, ++ &dev->metering_mode, ++ sizeof(u32)); ++ ret += set_framerate_params(dev); ++ } else { ++ /* Set up scene mode */ ++ int i; ++ const struct v4l2_mmal_scene_config *scene = NULL; ++ int shutter_speed; ++ enum mmal_parameter_exposuremode exposure_mode; ++ enum mmal_parameter_exposuremeteringmode metering_mode; ++ ++ for (i = 0; i < ARRAY_SIZE(scene_configs); i++) { ++ if (scene_configs[i].v4l2_scene == ++ ctrl->val) { ++ scene = &scene_configs[i]; ++ break; ++ } ++ } ++ if (!scene) ++ return -EINVAL; ++ if (i >= ARRAY_SIZE(scene_configs)) ++ return -EINVAL; ++ ++ /* Set all the values */ ++ dev->scene_mode = ctrl->val; ++ ++ if (scene->exposure_mode == MMAL_PARAM_EXPOSUREMODE_OFF) ++ shutter_speed = dev->manual_shutter_speed; ++ else ++ shutter_speed = 0; ++ exposure_mode = scene->exposure_mode; ++ metering_mode = scene->metering_mode; ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "%s: scene mode none: shut_speed %d, exp_mode %d, metering %d\n", ++ __func__, shutter_speed, exposure_mode, metering_mode); ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, control, ++ MMAL_PARAMETER_SHUTTER_SPEED, ++ &shutter_speed, ++ sizeof(shutter_speed)); ++ ret += vchiq_mmal_port_parameter_set(dev->instance, ++ control, ++ MMAL_PARAMETER_EXPOSURE_MODE, ++ &exposure_mode, ++ sizeof(u32)); ++ dev->exposure_mode_active = exposure_mode; ++ ret += vchiq_mmal_port_parameter_set(dev->instance, control, ++ MMAL_PARAMETER_EXPOSURE_MODE, ++ &exposure_mode, ++ sizeof(u32)); ++ ret += vchiq_mmal_port_parameter_set(dev->instance, control, ++ MMAL_PARAMETER_EXP_METERING_MODE, ++ &metering_mode, ++ sizeof(u32)); ++ ret += set_framerate_params(dev); ++ } ++ if (ret) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "%s: Setting scene to %d, ret=%d\n", ++ __func__, ctrl->val, ret); ++ ret = -EINVAL; ++ } ++ return 0; ++} ++ ++static int bm2835_mmal_s_ctrl(struct v4l2_ctrl *ctrl) ++{ ++ struct bm2835_mmal_dev *dev = ++ container_of(ctrl->handler, struct bm2835_mmal_dev, ++ ctrl_handler); ++ const struct bm2835_mmal_v4l2_ctrl *mmal_ctrl = ctrl->priv; ++ int ret; ++ ++ if ((mmal_ctrl == NULL) || ++ (mmal_ctrl->id != ctrl->id) || ++ (mmal_ctrl->setter == NULL)) { ++ pr_warn("mmal_ctrl:%p ctrl id:%d\n", mmal_ctrl, ctrl->id); ++ return -EINVAL; ++ } ++ ++ ret = mmal_ctrl->setter(dev, ctrl, mmal_ctrl); ++ if (ret) ++ pr_warn("ctrl id:%d/MMAL param %08X- returned ret %d\n", ++ ctrl->id, mmal_ctrl->mmal_id, ret); ++ if (mmal_ctrl->ignore_errors) ++ ret = 0; ++ return ret; ++} ++ ++static const struct v4l2_ctrl_ops bm2835_mmal_ctrl_ops = { ++ .s_ctrl = bm2835_mmal_s_ctrl, ++}; ++ ++ ++ ++static const struct bm2835_mmal_v4l2_ctrl v4l2_ctrls[V4L2_CTRL_COUNT] = { ++ { ++ V4L2_CID_SATURATION, MMAL_CONTROL_TYPE_STD, ++ -100, 100, 0, 1, NULL, ++ MMAL_PARAMETER_SATURATION, ++ &ctrl_set_rational, ++ false ++ }, ++ { ++ V4L2_CID_SHARPNESS, MMAL_CONTROL_TYPE_STD, ++ -100, 100, 0, 1, NULL, ++ MMAL_PARAMETER_SHARPNESS, ++ &ctrl_set_rational, ++ false ++ }, ++ { ++ V4L2_CID_CONTRAST, MMAL_CONTROL_TYPE_STD, ++ -100, 100, 0, 1, NULL, ++ MMAL_PARAMETER_CONTRAST, ++ &ctrl_set_rational, ++ false ++ }, ++ { ++ V4L2_CID_BRIGHTNESS, MMAL_CONTROL_TYPE_STD, ++ 0, 100, 50, 1, NULL, ++ MMAL_PARAMETER_BRIGHTNESS, ++ &ctrl_set_rational, ++ false ++ }, ++ { ++ V4L2_CID_ISO_SENSITIVITY, MMAL_CONTROL_TYPE_INT_MENU, ++ 0, ARRAY_SIZE(iso_qmenu) - 1, 0, 1, iso_qmenu, ++ MMAL_PARAMETER_ISO, ++ &ctrl_set_iso, ++ false ++ }, ++ { ++ V4L2_CID_ISO_SENSITIVITY_AUTO, MMAL_CONTROL_TYPE_STD_MENU, ++ 0, 1, V4L2_ISO_SENSITIVITY_AUTO, 1, NULL, ++ MMAL_PARAMETER_ISO, ++ &ctrl_set_iso, ++ false ++ }, ++ { ++ V4L2_CID_IMAGE_STABILIZATION, MMAL_CONTROL_TYPE_STD, ++ 0, 1, 0, 1, NULL, ++ MMAL_PARAMETER_VIDEO_STABILISATION, ++ &ctrl_set_value, ++ false ++ }, ++/* { ++ 0, MMAL_CONTROL_TYPE_CLUSTER, 3, 1, 0, NULL, 0, NULL ++ }, */ ++ { ++ V4L2_CID_EXPOSURE_AUTO, MMAL_CONTROL_TYPE_STD_MENU, ++ ~0x03, 3, V4L2_EXPOSURE_AUTO, 0, NULL, ++ MMAL_PARAMETER_EXPOSURE_MODE, ++ &ctrl_set_exposure, ++ false ++ }, ++/* todo this needs mixing in with set exposure ++ { ++ V4L2_CID_SCENE_MODE, MMAL_CONTROL_TYPE_STD_MENU, ++ }, ++ */ ++ { ++ V4L2_CID_EXPOSURE_ABSOLUTE, MMAL_CONTROL_TYPE_STD, ++ /* Units of 100usecs */ ++ 1, 1*1000*10, 100*10, 1, NULL, ++ MMAL_PARAMETER_SHUTTER_SPEED, ++ &ctrl_set_exposure, ++ false ++ }, ++ { ++ V4L2_CID_AUTO_EXPOSURE_BIAS, MMAL_CONTROL_TYPE_INT_MENU, ++ 0, ARRAY_SIZE(ev_bias_qmenu) - 1, ++ (ARRAY_SIZE(ev_bias_qmenu)+1)/2 - 1, 0, ev_bias_qmenu, ++ MMAL_PARAMETER_EXPOSURE_COMP, ++ &ctrl_set_value_ev, ++ false ++ }, ++ { ++ V4L2_CID_EXPOSURE_AUTO_PRIORITY, MMAL_CONTROL_TYPE_STD, ++ 0, 1, ++ 0, 1, NULL, ++ 0, /* Dummy MMAL ID as it gets mapped into FPS range*/ ++ &ctrl_set_exposure, ++ false ++ }, ++ { ++ V4L2_CID_EXPOSURE_METERING, ++ MMAL_CONTROL_TYPE_STD_MENU, ++ ~0x7, 2, V4L2_EXPOSURE_METERING_AVERAGE, 0, NULL, ++ MMAL_PARAMETER_EXP_METERING_MODE, ++ &ctrl_set_metering_mode, ++ false ++ }, ++ { ++ V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE, ++ MMAL_CONTROL_TYPE_STD_MENU, ++ ~0x3ff, 9, V4L2_WHITE_BALANCE_AUTO, 0, NULL, ++ MMAL_PARAMETER_AWB_MODE, ++ &ctrl_set_awb_mode, ++ false ++ }, ++ { ++ V4L2_CID_RED_BALANCE, MMAL_CONTROL_TYPE_STD, ++ 1, 7999, 1000, 1, NULL, ++ MMAL_PARAMETER_CUSTOM_AWB_GAINS, ++ &ctrl_set_awb_gains, ++ false ++ }, ++ { ++ V4L2_CID_BLUE_BALANCE, MMAL_CONTROL_TYPE_STD, ++ 1, 7999, 1000, 1, NULL, ++ MMAL_PARAMETER_CUSTOM_AWB_GAINS, ++ &ctrl_set_awb_gains, ++ false ++ }, ++ { ++ V4L2_CID_COLORFX, MMAL_CONTROL_TYPE_STD_MENU, ++ 0, 15, V4L2_COLORFX_NONE, 0, NULL, ++ MMAL_PARAMETER_IMAGE_EFFECT, ++ &ctrl_set_image_effect, ++ false ++ }, ++ { ++ V4L2_CID_COLORFX_CBCR, MMAL_CONTROL_TYPE_STD, ++ 0, 0xffff, 0x8080, 1, NULL, ++ MMAL_PARAMETER_COLOUR_EFFECT, ++ &ctrl_set_colfx, ++ false ++ }, ++ { ++ V4L2_CID_ROTATE, MMAL_CONTROL_TYPE_STD, ++ 0, 360, 0, 90, NULL, ++ MMAL_PARAMETER_ROTATION, ++ &ctrl_set_rotate, ++ false ++ }, ++ { ++ V4L2_CID_HFLIP, MMAL_CONTROL_TYPE_STD, ++ 0, 1, 0, 1, NULL, ++ MMAL_PARAMETER_MIRROR, ++ &ctrl_set_flip, ++ false ++ }, ++ { ++ V4L2_CID_VFLIP, MMAL_CONTROL_TYPE_STD, ++ 0, 1, 0, 1, NULL, ++ MMAL_PARAMETER_MIRROR, ++ &ctrl_set_flip, ++ false ++ }, ++ { ++ V4L2_CID_MPEG_VIDEO_BITRATE_MODE, MMAL_CONTROL_TYPE_STD_MENU, ++ 0, ARRAY_SIZE(bitrate_mode_qmenu) - 1, ++ 0, 0, bitrate_mode_qmenu, ++ MMAL_PARAMETER_RATECONTROL, ++ &ctrl_set_bitrate_mode, ++ false ++ }, ++ { ++ V4L2_CID_MPEG_VIDEO_BITRATE, MMAL_CONTROL_TYPE_STD, ++ 25*1000, 25*1000*1000, 10*1000*1000, 25*1000, NULL, ++ MMAL_PARAMETER_VIDEO_BIT_RATE, ++ &ctrl_set_bitrate, ++ false ++ }, ++ { ++ V4L2_CID_JPEG_COMPRESSION_QUALITY, MMAL_CONTROL_TYPE_STD, ++ 1, 100, ++ 30, 1, NULL, ++ MMAL_PARAMETER_JPEG_Q_FACTOR, ++ &ctrl_set_image_encode_output, ++ false ++ }, ++ { ++ V4L2_CID_POWER_LINE_FREQUENCY, MMAL_CONTROL_TYPE_STD_MENU, ++ 0, ARRAY_SIZE(mains_freq_qmenu) - 1, ++ 1, 1, NULL, ++ MMAL_PARAMETER_FLICKER_AVOID, ++ &ctrl_set_flicker_avoidance, ++ false ++ }, ++ { ++ V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER, MMAL_CONTROL_TYPE_STD, ++ 0, 1, ++ 0, 1, NULL, ++ MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER, ++ &ctrl_set_video_encode_param_output, ++ true /* Errors ignored as requires latest firmware to work */ ++ }, ++ { ++ V4L2_CID_MPEG_VIDEO_H264_PROFILE, ++ MMAL_CONTROL_TYPE_STD_MENU, ++ ~((1<ctrls[c]) && (v4l2_ctrls[c].setter)) { ++ ret = v4l2_ctrls[c].setter(dev, dev->ctrls[c], ++ &v4l2_ctrls[c]); ++ if (!v4l2_ctrls[c].ignore_errors && ret) { ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Failed when setting default values for ctrl %d\n", ++ c); ++ break; ++ } ++ } ++ } ++ return ret; ++} ++ ++int set_framerate_params(struct bm2835_mmal_dev *dev) ++{ ++ struct mmal_parameter_fps_range fps_range; ++ int ret; ++ ++ if ((dev->exposure_mode_active != MMAL_PARAM_EXPOSUREMODE_OFF) && ++ (dev->exp_auto_priority)) { ++ /* Variable FPS. Define min FPS as 1fps. ++ * Max as max defined FPS. ++ */ ++ fps_range.fps_low.num = 1; ++ fps_range.fps_low.den = 1; ++ fps_range.fps_high.num = dev->capture.timeperframe.denominator; ++ fps_range.fps_high.den = dev->capture.timeperframe.numerator; ++ } else { ++ /* Fixed FPS - set min and max to be the same */ ++ fps_range.fps_low.num = fps_range.fps_high.num = ++ dev->capture.timeperframe.denominator; ++ fps_range.fps_low.den = fps_range.fps_high.den = ++ dev->capture.timeperframe.numerator; ++ } ++ ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Set fps range to %d/%d to %d/%d\n", ++ fps_range.fps_low.num, ++ fps_range.fps_low.den, ++ fps_range.fps_high.num, ++ fps_range.fps_high.den ++ ); ++ ++ ret = vchiq_mmal_port_parameter_set(dev->instance, ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_PREVIEW], ++ MMAL_PARAMETER_FPS_RANGE, ++ &fps_range, sizeof(fps_range)); ++ ret += vchiq_mmal_port_parameter_set(dev->instance, ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_VIDEO], ++ MMAL_PARAMETER_FPS_RANGE, ++ &fps_range, sizeof(fps_range)); ++ ret += vchiq_mmal_port_parameter_set(dev->instance, ++ &dev->component[MMAL_COMPONENT_CAMERA]-> ++ output[MMAL_CAMERA_PORT_CAPTURE], ++ MMAL_PARAMETER_FPS_RANGE, ++ &fps_range, sizeof(fps_range)); ++ if (ret) ++ v4l2_dbg(0, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Failed to set fps ret %d\n", ++ ret); ++ ++ return ret; ++ ++} ++ ++int bm2835_mmal_init_controls(struct bm2835_mmal_dev *dev, ++ struct v4l2_ctrl_handler *hdl) ++{ ++ int c; ++ const struct bm2835_mmal_v4l2_ctrl *ctrl; ++ ++ v4l2_ctrl_handler_init(hdl, V4L2_CTRL_COUNT); ++ ++ for (c = 0; c < V4L2_CTRL_COUNT; c++) { ++ ctrl = &v4l2_ctrls[c]; ++ ++ switch (ctrl->type) { ++ case MMAL_CONTROL_TYPE_STD: ++ dev->ctrls[c] = v4l2_ctrl_new_std(hdl, ++ &bm2835_mmal_ctrl_ops, ctrl->id, ++ ctrl->min, ctrl->max, ctrl->step, ctrl->def); ++ break; ++ ++ case MMAL_CONTROL_TYPE_STD_MENU: ++ { ++ int mask = ctrl->min; ++ ++ if (ctrl->id == V4L2_CID_SCENE_MODE) { ++ /* Special handling to work out the mask ++ * value based on the scene_configs array ++ * at runtime. Reduces the chance of ++ * mismatches. ++ */ ++ int i; ++ mask = 1<ctrls[c] = v4l2_ctrl_new_std_menu(hdl, ++ &bm2835_mmal_ctrl_ops, ctrl->id, ++ ctrl->max, mask, ctrl->def); ++ break; ++ } ++ ++ case MMAL_CONTROL_TYPE_INT_MENU: ++ dev->ctrls[c] = v4l2_ctrl_new_int_menu(hdl, ++ &bm2835_mmal_ctrl_ops, ctrl->id, ++ ctrl->max, ctrl->def, ctrl->imenu); ++ break; ++ ++ case MMAL_CONTROL_TYPE_CLUSTER: ++ /* skip this entry when constructing controls */ ++ continue; ++ } ++ ++ if (hdl->error) ++ break; ++ ++ dev->ctrls[c]->priv = (void *)ctrl; ++ } ++ ++ if (hdl->error) { ++ pr_err("error adding control %d/%d id 0x%x\n", c, ++ V4L2_CTRL_COUNT, ctrl->id); ++ return hdl->error; ++ } ++ ++ for (c = 0; c < V4L2_CTRL_COUNT; c++) { ++ ctrl = &v4l2_ctrls[c]; ++ ++ switch (ctrl->type) { ++ case MMAL_CONTROL_TYPE_CLUSTER: ++ v4l2_ctrl_auto_cluster(ctrl->min, ++ &dev->ctrls[c+1], ++ ctrl->max, ++ ctrl->def); ++ break; ++ ++ case MMAL_CONTROL_TYPE_STD: ++ case MMAL_CONTROL_TYPE_STD_MENU: ++ case MMAL_CONTROL_TYPE_INT_MENU: ++ break; ++ } ++ ++ } ++ ++ return 0; ++} +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-common.h +@@ -0,0 +1,53 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ * ++ * MMAL structures ++ * ++ */ ++ ++#define MMAL_FOURCC(a, b, c, d) ((a) | (b << 8) | (c << 16) | (d << 24)) ++#define MMAL_MAGIC MMAL_FOURCC('m', 'm', 'a', 'l') ++ ++/** Special value signalling that time is not known */ ++#define MMAL_TIME_UNKNOWN (1LL<<63) ++ ++/* mapping between v4l and mmal video modes */ ++struct mmal_fmt { ++ char *name; ++ u32 fourcc; /* v4l2 format id */ ++ int flags; /* v4l2 flags field */ ++ u32 mmal; ++ int depth; ++ u32 mmal_component; /* MMAL component index to be used to encode */ ++ u32 ybbp; /* depth of first Y plane for planar formats */ ++}; ++ ++/* buffer for one video frame */ ++struct mmal_buffer { ++ /* v4l buffer data -- must be first */ ++ struct vb2_v4l2_buffer vb; ++ ++ /* list of buffers available */ ++ struct list_head list; ++ ++ void *buffer; /* buffer pointer */ ++ unsigned long buffer_size; /* size of allocated buffer */ ++}; ++ ++/* */ ++struct mmal_colourfx { ++ s32 enable; ++ u32 u; ++ u32 v; ++}; +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-encodings.h +@@ -0,0 +1,127 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ */ ++#ifndef MMAL_ENCODINGS_H ++#define MMAL_ENCODINGS_H ++ ++#define MMAL_ENCODING_H264 MMAL_FOURCC('H', '2', '6', '4') ++#define MMAL_ENCODING_H263 MMAL_FOURCC('H', '2', '6', '3') ++#define MMAL_ENCODING_MP4V MMAL_FOURCC('M', 'P', '4', 'V') ++#define MMAL_ENCODING_MP2V MMAL_FOURCC('M', 'P', '2', 'V') ++#define MMAL_ENCODING_MP1V MMAL_FOURCC('M', 'P', '1', 'V') ++#define MMAL_ENCODING_WMV3 MMAL_FOURCC('W', 'M', 'V', '3') ++#define MMAL_ENCODING_WMV2 MMAL_FOURCC('W', 'M', 'V', '2') ++#define MMAL_ENCODING_WMV1 MMAL_FOURCC('W', 'M', 'V', '1') ++#define MMAL_ENCODING_WVC1 MMAL_FOURCC('W', 'V', 'C', '1') ++#define MMAL_ENCODING_VP8 MMAL_FOURCC('V', 'P', '8', ' ') ++#define MMAL_ENCODING_VP7 MMAL_FOURCC('V', 'P', '7', ' ') ++#define MMAL_ENCODING_VP6 MMAL_FOURCC('V', 'P', '6', ' ') ++#define MMAL_ENCODING_THEORA MMAL_FOURCC('T', 'H', 'E', 'O') ++#define MMAL_ENCODING_SPARK MMAL_FOURCC('S', 'P', 'R', 'K') ++#define MMAL_ENCODING_MJPEG MMAL_FOURCC('M', 'J', 'P', 'G') ++ ++#define MMAL_ENCODING_JPEG MMAL_FOURCC('J', 'P', 'E', 'G') ++#define MMAL_ENCODING_GIF MMAL_FOURCC('G', 'I', 'F', ' ') ++#define MMAL_ENCODING_PNG MMAL_FOURCC('P', 'N', 'G', ' ') ++#define MMAL_ENCODING_PPM MMAL_FOURCC('P', 'P', 'M', ' ') ++#define MMAL_ENCODING_TGA MMAL_FOURCC('T', 'G', 'A', ' ') ++#define MMAL_ENCODING_BMP MMAL_FOURCC('B', 'M', 'P', ' ') ++ ++#define MMAL_ENCODING_I420 MMAL_FOURCC('I', '4', '2', '0') ++#define MMAL_ENCODING_I420_SLICE MMAL_FOURCC('S', '4', '2', '0') ++#define MMAL_ENCODING_YV12 MMAL_FOURCC('Y', 'V', '1', '2') ++#define MMAL_ENCODING_I422 MMAL_FOURCC('I', '4', '2', '2') ++#define MMAL_ENCODING_I422_SLICE MMAL_FOURCC('S', '4', '2', '2') ++#define MMAL_ENCODING_YUYV MMAL_FOURCC('Y', 'U', 'Y', 'V') ++#define MMAL_ENCODING_YVYU MMAL_FOURCC('Y', 'V', 'Y', 'U') ++#define MMAL_ENCODING_UYVY MMAL_FOURCC('U', 'Y', 'V', 'Y') ++#define MMAL_ENCODING_VYUY MMAL_FOURCC('V', 'Y', 'U', 'Y') ++#define MMAL_ENCODING_NV12 MMAL_FOURCC('N', 'V', '1', '2') ++#define MMAL_ENCODING_NV21 MMAL_FOURCC('N', 'V', '2', '1') ++#define MMAL_ENCODING_ARGB MMAL_FOURCC('A', 'R', 'G', 'B') ++#define MMAL_ENCODING_RGBA MMAL_FOURCC('R', 'G', 'B', 'A') ++#define MMAL_ENCODING_ABGR MMAL_FOURCC('A', 'B', 'G', 'R') ++#define MMAL_ENCODING_BGRA MMAL_FOURCC('B', 'G', 'R', 'A') ++#define MMAL_ENCODING_RGB16 MMAL_FOURCC('R', 'G', 'B', '2') ++#define MMAL_ENCODING_RGB24 MMAL_FOURCC('R', 'G', 'B', '3') ++#define MMAL_ENCODING_RGB32 MMAL_FOURCC('R', 'G', 'B', '4') ++#define MMAL_ENCODING_BGR16 MMAL_FOURCC('B', 'G', 'R', '2') ++#define MMAL_ENCODING_BGR24 MMAL_FOURCC('B', 'G', 'R', '3') ++#define MMAL_ENCODING_BGR32 MMAL_FOURCC('B', 'G', 'R', '4') ++ ++/** SAND Video (YUVUV128) format, native format understood by VideoCore. ++ * This format is *not* opaque - if requested you will receive full frames ++ * of YUV_UV video. ++ */ ++#define MMAL_ENCODING_YUVUV128 MMAL_FOURCC('S', 'A', 'N', 'D') ++ ++/** VideoCore opaque image format, image handles are returned to ++ * the host but not the actual image data. ++ */ ++#define MMAL_ENCODING_OPAQUE MMAL_FOURCC('O', 'P', 'Q', 'V') ++ ++/** An EGL image handle ++ */ ++#define MMAL_ENCODING_EGL_IMAGE MMAL_FOURCC('E', 'G', 'L', 'I') ++ ++/* }@ */ ++ ++/** \name Pre-defined audio encodings */ ++/* @{ */ ++#define MMAL_ENCODING_PCM_UNSIGNED_BE MMAL_FOURCC('P', 'C', 'M', 'U') ++#define MMAL_ENCODING_PCM_UNSIGNED_LE MMAL_FOURCC('p', 'c', 'm', 'u') ++#define MMAL_ENCODING_PCM_SIGNED_BE MMAL_FOURCC('P', 'C', 'M', 'S') ++#define MMAL_ENCODING_PCM_SIGNED_LE MMAL_FOURCC('p', 'c', 'm', 's') ++#define MMAL_ENCODING_PCM_FLOAT_BE MMAL_FOURCC('P', 'C', 'M', 'F') ++#define MMAL_ENCODING_PCM_FLOAT_LE MMAL_FOURCC('p', 'c', 'm', 'f') ++ ++/* Pre-defined H264 encoding variants */ ++ ++/** ISO 14496-10 Annex B byte stream format */ ++#define MMAL_ENCODING_VARIANT_H264_DEFAULT 0 ++/** ISO 14496-15 AVC stream format */ ++#define MMAL_ENCODING_VARIANT_H264_AVC1 MMAL_FOURCC('A', 'V', 'C', '1') ++/** Implicitly delineated NAL units without emulation prevention */ ++#define MMAL_ENCODING_VARIANT_H264_RAW MMAL_FOURCC('R', 'A', 'W', ' ') ++ ++ ++/** \defgroup MmalColorSpace List of pre-defined video color spaces ++ * This defines a list of common color spaces. This list isn't exhaustive and ++ * is only provided as a convenience to avoid clients having to use FourCC ++ * codes directly. However components are allowed to define and use their own ++ * FourCC codes. ++ */ ++/* @{ */ ++ ++/** Unknown color space */ ++#define MMAL_COLOR_SPACE_UNKNOWN 0 ++/** ITU-R BT.601-5 [SDTV] */ ++#define MMAL_COLOR_SPACE_ITUR_BT601 MMAL_FOURCC('Y', '6', '0', '1') ++/** ITU-R BT.709-3 [HDTV] */ ++#define MMAL_COLOR_SPACE_ITUR_BT709 MMAL_FOURCC('Y', '7', '0', '9') ++/** JPEG JFIF */ ++#define MMAL_COLOR_SPACE_JPEG_JFIF MMAL_FOURCC('Y', 'J', 'F', 'I') ++/** Title 47 Code of Federal Regulations (2003) 73.682 (a) (20) */ ++#define MMAL_COLOR_SPACE_FCC MMAL_FOURCC('Y', 'F', 'C', 'C') ++/** Society of Motion Picture and Television Engineers 240M (1999) */ ++#define MMAL_COLOR_SPACE_SMPTE240M MMAL_FOURCC('Y', '2', '4', '0') ++/** ITU-R BT.470-2 System M */ ++#define MMAL_COLOR_SPACE_BT470_2_M MMAL_FOURCC('Y', '_', '_', 'M') ++/** ITU-R BT.470-2 System BG */ ++#define MMAL_COLOR_SPACE_BT470_2_BG MMAL_FOURCC('Y', '_', 'B', 'G') ++/** JPEG JFIF, but with 16..255 luma */ ++#define MMAL_COLOR_SPACE_JFIF_Y16_255 MMAL_FOURCC('Y', 'Y', '1', '6') ++/* @} MmalColorSpace List */ ++ ++#endif /* MMAL_ENCODINGS_H */ +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-msg-common.h +@@ -0,0 +1,50 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ */ ++ ++#ifndef MMAL_MSG_COMMON_H ++#define MMAL_MSG_COMMON_H ++ ++enum mmal_msg_status { ++ MMAL_MSG_STATUS_SUCCESS = 0, /**< Success */ ++ MMAL_MSG_STATUS_ENOMEM, /**< Out of memory */ ++ MMAL_MSG_STATUS_ENOSPC, /**< Out of resources other than memory */ ++ MMAL_MSG_STATUS_EINVAL, /**< Argument is invalid */ ++ MMAL_MSG_STATUS_ENOSYS, /**< Function not implemented */ ++ MMAL_MSG_STATUS_ENOENT, /**< No such file or directory */ ++ MMAL_MSG_STATUS_ENXIO, /**< No such device or address */ ++ MMAL_MSG_STATUS_EIO, /**< I/O error */ ++ MMAL_MSG_STATUS_ESPIPE, /**< Illegal seek */ ++ MMAL_MSG_STATUS_ECORRUPT, /**< Data is corrupt \attention */ ++ MMAL_MSG_STATUS_ENOTREADY, /**< Component is not ready */ ++ MMAL_MSG_STATUS_ECONFIG, /**< Component is not configured */ ++ MMAL_MSG_STATUS_EISCONN, /**< Port is already connected */ ++ MMAL_MSG_STATUS_ENOTCONN, /**< Port is disconnected */ ++ MMAL_MSG_STATUS_EAGAIN, /**< Resource temporarily unavailable. */ ++ MMAL_MSG_STATUS_EFAULT, /**< Bad address */ ++}; ++ ++struct mmal_rect { ++ s32 x; /**< x coordinate (from left) */ ++ s32 y; /**< y coordinate (from top) */ ++ s32 width; /**< width */ ++ s32 height; /**< height */ ++}; ++ ++struct mmal_rational { ++ s32 num; /**< Numerator */ ++ s32 den; /**< Denominator */ ++}; ++ ++#endif /* MMAL_MSG_COMMON_H */ +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-msg-format.h +@@ -0,0 +1,81 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ */ ++ ++#ifndef MMAL_MSG_FORMAT_H ++#define MMAL_MSG_FORMAT_H ++ ++#include "mmal-msg-common.h" ++ ++/* MMAL_ES_FORMAT_T */ ++ ++ ++struct mmal_audio_format { ++ u32 channels; /**< Number of audio channels */ ++ u32 sample_rate; /**< Sample rate */ ++ ++ u32 bits_per_sample; /**< Bits per sample */ ++ u32 block_align; /**< Size of a block of data */ ++}; ++ ++struct mmal_video_format { ++ u32 width; /**< Width of frame in pixels */ ++ u32 height; /**< Height of frame in rows of pixels */ ++ struct mmal_rect crop; /**< Visible region of the frame */ ++ struct mmal_rational frame_rate; /**< Frame rate */ ++ struct mmal_rational par; /**< Pixel aspect ratio */ ++ ++ /* FourCC specifying the color space of the video stream. See the ++ * \ref MmalColorSpace "pre-defined color spaces" for some examples. ++ */ ++ u32 color_space; ++}; ++ ++struct mmal_subpicture_format { ++ u32 x_offset; ++ u32 y_offset; ++}; ++ ++union mmal_es_specific_format { ++ struct mmal_audio_format audio; ++ struct mmal_video_format video; ++ struct mmal_subpicture_format subpicture; ++}; ++ ++/** Definition of an elementary stream format (MMAL_ES_FORMAT_T) */ ++struct mmal_es_format { ++ u32 type; /* enum mmal_es_type */ ++ ++ u32 encoding; /* FourCC specifying encoding of the elementary stream.*/ ++ u32 encoding_variant; /* FourCC specifying the specific ++ * encoding variant of the elementary ++ * stream. ++ */ ++ ++ union mmal_es_specific_format *es; /* TODO: pointers in ++ * message serialisation?!? ++ */ ++ /* Type specific ++ * information for the ++ * elementary stream ++ */ ++ ++ u32 bitrate; /**< Bitrate in bits per second */ ++ u32 flags; /**< Flags describing properties of the elementary stream. */ ++ ++ u32 extradata_size; /**< Size of the codec specific data */ ++ u8 *extradata; /**< Codec specific data */ ++}; ++ ++#endif /* MMAL_MSG_FORMAT_H */ +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-msg-port.h +@@ -0,0 +1,107 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ */ ++ ++/* MMAL_PORT_TYPE_T */ ++enum mmal_port_type { ++ MMAL_PORT_TYPE_UNKNOWN = 0, /**< Unknown port type */ ++ MMAL_PORT_TYPE_CONTROL, /**< Control port */ ++ MMAL_PORT_TYPE_INPUT, /**< Input port */ ++ MMAL_PORT_TYPE_OUTPUT, /**< Output port */ ++ MMAL_PORT_TYPE_CLOCK, /**< Clock port */ ++}; ++ ++/** The port is pass-through and doesn't need buffer headers allocated */ ++#define MMAL_PORT_CAPABILITY_PASSTHROUGH 0x01 ++/** The port wants to allocate the buffer payloads. ++ * This signals a preference that payload allocation should be done ++ * on this port for efficiency reasons. */ ++#define MMAL_PORT_CAPABILITY_ALLOCATION 0x02 ++/** The port supports format change events. ++ * This applies to input ports and is used to let the client know ++ * whether the port supports being reconfigured via a format ++ * change event (i.e. without having to disable the port). */ ++#define MMAL_PORT_CAPABILITY_SUPPORTS_EVENT_FORMAT_CHANGE 0x04 ++ ++/* mmal port structure (MMAL_PORT_T) ++ * ++ * most elements are informational only, the pointer values for ++ * interogation messages are generally provided as additional ++ * strucures within the message. When used to set values only teh ++ * buffer_num, buffer_size and userdata parameters are writable. ++ */ ++struct mmal_port { ++ void *priv; /* Private member used by the framework */ ++ const char *name; /* Port name. Used for debugging purposes (RO) */ ++ ++ u32 type; /* Type of the port (RO) enum mmal_port_type */ ++ u16 index; /* Index of the port in its type list (RO) */ ++ u16 index_all; /* Index of the port in the list of all ports (RO) */ ++ ++ u32 is_enabled; /* Indicates whether the port is enabled or not (RO) */ ++ struct mmal_es_format *format; /* Format of the elementary stream */ ++ ++ u32 buffer_num_min; /* Minimum number of buffers the port ++ * requires (RO). This is set by the ++ * component. ++ */ ++ ++ u32 buffer_size_min; /* Minimum size of buffers the port ++ * requires (RO). This is set by the ++ * component. ++ */ ++ ++ u32 buffer_alignment_min; /* Minimum alignment requirement for ++ * the buffers (RO). A value of ++ * zero means no special alignment ++ * requirements. This is set by the ++ * component. ++ */ ++ ++ u32 buffer_num_recommended; /* Number of buffers the port ++ * recommends for optimal ++ * performance (RO). A value of ++ * zero means no special ++ * recommendation. This is set ++ * by the component. ++ */ ++ ++ u32 buffer_size_recommended; /* Size of buffers the port ++ * recommends for optimal ++ * performance (RO). A value of ++ * zero means no special ++ * recommendation. This is set ++ * by the component. ++ */ ++ ++ u32 buffer_num; /* Actual number of buffers the port will use. ++ * This is set by the client. ++ */ ++ ++ u32 buffer_size; /* Actual maximum size of the buffers that ++ * will be sent to the port. This is set by ++ * the client. ++ */ ++ ++ void *component; /* Component this port belongs to (Read Only) */ ++ ++ void *userdata; /* Field reserved for use by the client */ ++ ++ u32 capabilities; /* Flags describing the capabilities of a ++ * port (RO). Bitwise combination of \ref ++ * portcapabilities "Port capabilities" ++ * values. ++ */ ++ ++}; +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-msg.h +@@ -0,0 +1,404 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ */ ++ ++/* all the data structures which serialise the MMAL protocol. note ++ * these are directly mapped onto the recived message data. ++ * ++ * BEWARE: They seem to *assume* pointers are u32 and that there is no ++ * structure padding! ++ * ++ * NOTE: this implementation uses kernel types to ensure sizes. Rather ++ * than assigning values to enums to force their size the ++ * implementation uses fixed size types and not the enums (though the ++ * comments have the actual enum type ++ */ ++ ++#define VC_MMAL_VER 15 ++#define VC_MMAL_MIN_VER 10 ++#define VC_MMAL_SERVER_NAME MAKE_FOURCC("mmal") ++ ++/* max total message size is 512 bytes */ ++#define MMAL_MSG_MAX_SIZE 512 ++/* with six 32bit header elements max payload is therefore 488 bytes */ ++#define MMAL_MSG_MAX_PAYLOAD 488 ++ ++#include "mmal-msg-common.h" ++#include "mmal-msg-format.h" ++#include "mmal-msg-port.h" ++ ++enum mmal_msg_type { ++ MMAL_MSG_TYPE_QUIT = 1, ++ MMAL_MSG_TYPE_SERVICE_CLOSED, ++ MMAL_MSG_TYPE_GET_VERSION, ++ MMAL_MSG_TYPE_COMPONENT_CREATE, ++ MMAL_MSG_TYPE_COMPONENT_DESTROY, /* 5 */ ++ MMAL_MSG_TYPE_COMPONENT_ENABLE, ++ MMAL_MSG_TYPE_COMPONENT_DISABLE, ++ MMAL_MSG_TYPE_PORT_INFO_GET, ++ MMAL_MSG_TYPE_PORT_INFO_SET, ++ MMAL_MSG_TYPE_PORT_ACTION, /* 10 */ ++ MMAL_MSG_TYPE_BUFFER_FROM_HOST, ++ MMAL_MSG_TYPE_BUFFER_TO_HOST, ++ MMAL_MSG_TYPE_GET_STATS, ++ MMAL_MSG_TYPE_PORT_PARAMETER_SET, ++ MMAL_MSG_TYPE_PORT_PARAMETER_GET, /* 15 */ ++ MMAL_MSG_TYPE_EVENT_TO_HOST, ++ MMAL_MSG_TYPE_GET_CORE_STATS_FOR_PORT, ++ MMAL_MSG_TYPE_OPAQUE_ALLOCATOR, ++ MMAL_MSG_TYPE_CONSUME_MEM, ++ MMAL_MSG_TYPE_LMK, /* 20 */ ++ MMAL_MSG_TYPE_OPAQUE_ALLOCATOR_DESC, ++ MMAL_MSG_TYPE_DRM_GET_LHS32, ++ MMAL_MSG_TYPE_DRM_GET_TIME, ++ MMAL_MSG_TYPE_BUFFER_FROM_HOST_ZEROLEN, ++ MMAL_MSG_TYPE_PORT_FLUSH, /* 25 */ ++ MMAL_MSG_TYPE_HOST_LOG, ++ MMAL_MSG_TYPE_MSG_LAST ++}; ++ ++/* port action request messages differ depending on the action type */ ++enum mmal_msg_port_action_type { ++ MMAL_MSG_PORT_ACTION_TYPE_UNKNOWN = 0, /* Unkown action */ ++ MMAL_MSG_PORT_ACTION_TYPE_ENABLE, /* Enable a port */ ++ MMAL_MSG_PORT_ACTION_TYPE_DISABLE, /* Disable a port */ ++ MMAL_MSG_PORT_ACTION_TYPE_FLUSH, /* Flush a port */ ++ MMAL_MSG_PORT_ACTION_TYPE_CONNECT, /* Connect ports */ ++ MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, /* Disconnect ports */ ++ MMAL_MSG_PORT_ACTION_TYPE_SET_REQUIREMENTS, /* Set buffer requirements*/ ++}; ++ ++struct mmal_msg_header { ++ u32 magic; ++ u32 type; /** enum mmal_msg_type */ ++ ++ /* Opaque handle to the control service */ ++ struct mmal_control_service *control_service; ++ ++ struct mmal_msg_context *context; /** a u32 per message context */ ++ u32 status; /** The status of the vchiq operation */ ++ u32 padding; ++}; ++ ++/* Send from VC to host to report version */ ++struct mmal_msg_version { ++ u32 flags; ++ u32 major; ++ u32 minor; ++ u32 minimum; ++}; ++ ++/* request to VC to create component */ ++struct mmal_msg_component_create { ++ void *client_component; /* component context */ ++ char name[128]; ++ u32 pid; /* For debug */ ++}; ++ ++/* reply from VC to component creation request */ ++struct mmal_msg_component_create_reply { ++ u32 status; /** enum mmal_msg_status - how does this differ to ++ * the one in the header? ++ */ ++ u32 component_handle; /* VideoCore handle for component */ ++ u32 input_num; /* Number of input ports */ ++ u32 output_num; /* Number of output ports */ ++ u32 clock_num; /* Number of clock ports */ ++}; ++ ++/* request to VC to destroy a component */ ++struct mmal_msg_component_destroy { ++ u32 component_handle; ++}; ++ ++struct mmal_msg_component_destroy_reply { ++ u32 status; /** The component destruction status */ ++}; ++ ++ ++/* request and reply to VC to enable a component */ ++struct mmal_msg_component_enable { ++ u32 component_handle; ++}; ++ ++struct mmal_msg_component_enable_reply { ++ u32 status; /** The component enable status */ ++}; ++ ++ ++/* request and reply to VC to disable a component */ ++struct mmal_msg_component_disable { ++ u32 component_handle; ++}; ++ ++struct mmal_msg_component_disable_reply { ++ u32 status; /** The component disable status */ ++}; ++ ++/* request to VC to get port information */ ++struct mmal_msg_port_info_get { ++ u32 component_handle; /* component handle port is associated with */ ++ u32 port_type; /* enum mmal_msg_port_type */ ++ u32 index; /* port index to query */ ++}; ++ ++/* reply from VC to get port info request */ ++struct mmal_msg_port_info_get_reply { ++ u32 status; /** enum mmal_msg_status */ ++ u32 component_handle; /* component handle port is associated with */ ++ u32 port_type; /* enum mmal_msg_port_type */ ++ u32 port_index; /* port indexed in query */ ++ s32 found; /* unused */ ++ u32 port_handle; /**< Handle to use for this port */ ++ struct mmal_port port; ++ struct mmal_es_format format; /* elementry stream format */ ++ union mmal_es_specific_format es; /* es type specific data */ ++ u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; /* es extra data */ ++}; ++ ++/* request to VC to set port information */ ++struct mmal_msg_port_info_set { ++ u32 component_handle; ++ u32 port_type; /* enum mmal_msg_port_type */ ++ u32 port_index; /* port indexed in query */ ++ struct mmal_port port; ++ struct mmal_es_format format; ++ union mmal_es_specific_format es; ++ u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; ++}; ++ ++/* reply from VC to port info set request */ ++struct mmal_msg_port_info_set_reply { ++ u32 status; ++ u32 component_handle; /* component handle port is associated with */ ++ u32 port_type; /* enum mmal_msg_port_type */ ++ u32 index; /* port indexed in query */ ++ s32 found; /* unused */ ++ u32 port_handle; /**< Handle to use for this port */ ++ struct mmal_port port; ++ struct mmal_es_format format; ++ union mmal_es_specific_format es; ++ u8 extradata[MMAL_FORMAT_EXTRADATA_MAX_SIZE]; ++}; ++ ++ ++/* port action requests that take a mmal_port as a parameter */ ++struct mmal_msg_port_action_port { ++ u32 component_handle; ++ u32 port_handle; ++ u32 action; /* enum mmal_msg_port_action_type */ ++ struct mmal_port port; ++}; ++ ++/* port action requests that take handles as a parameter */ ++struct mmal_msg_port_action_handle { ++ u32 component_handle; ++ u32 port_handle; ++ u32 action; /* enum mmal_msg_port_action_type */ ++ u32 connect_component_handle; ++ u32 connect_port_handle; ++}; ++ ++struct mmal_msg_port_action_reply { ++ u32 status; /** The port action operation status */ ++}; ++ ++ ++ ++ ++/* MMAL buffer transfer */ ++ ++/** Size of space reserved in a buffer message for short messages. */ ++#define MMAL_VC_SHORT_DATA 128 ++ ++/** Signals that the current payload is the end of the stream of data */ ++#define MMAL_BUFFER_HEADER_FLAG_EOS (1<<0) ++/** Signals that the start of the current payload starts a frame */ ++#define MMAL_BUFFER_HEADER_FLAG_FRAME_START (1<<1) ++/** Signals that the end of the current payload ends a frame */ ++#define MMAL_BUFFER_HEADER_FLAG_FRAME_END (1<<2) ++/** Signals that the current payload contains only complete frames (>1) */ ++#define MMAL_BUFFER_HEADER_FLAG_FRAME \ ++ (MMAL_BUFFER_HEADER_FLAG_FRAME_START|MMAL_BUFFER_HEADER_FLAG_FRAME_END) ++/** Signals that the current payload is a keyframe (i.e. self decodable) */ ++#define MMAL_BUFFER_HEADER_FLAG_KEYFRAME (1<<3) ++/** Signals a discontinuity in the stream of data (e.g. after a seek). ++ * Can be used for instance by a decoder to reset its state */ ++#define MMAL_BUFFER_HEADER_FLAG_DISCONTINUITY (1<<4) ++/** Signals a buffer containing some kind of config data for the component ++ * (e.g. codec config data) */ ++#define MMAL_BUFFER_HEADER_FLAG_CONFIG (1<<5) ++/** Signals an encrypted payload */ ++#define MMAL_BUFFER_HEADER_FLAG_ENCRYPTED (1<<6) ++/** Signals a buffer containing side information */ ++#define MMAL_BUFFER_HEADER_FLAG_CODECSIDEINFO (1<<7) ++/** Signals a buffer which is the snapshot/postview image from a stills ++ * capture ++ */ ++#define MMAL_BUFFER_HEADER_FLAGS_SNAPSHOT (1<<8) ++/** Signals a buffer which contains data known to be corrupted */ ++#define MMAL_BUFFER_HEADER_FLAG_CORRUPTED (1<<9) ++/** Signals that a buffer failed to be transmitted */ ++#define MMAL_BUFFER_HEADER_FLAG_TRANSMISSION_FAILED (1<<10) ++ ++struct mmal_driver_buffer { ++ u32 magic; ++ u32 component_handle; ++ u32 port_handle; ++ void *client_context; ++}; ++ ++/* buffer header */ ++struct mmal_buffer_header { ++ struct mmal_buffer_header *next; /* next header */ ++ void *priv; /* framework private data */ ++ u32 cmd; ++ void *data; ++ u32 alloc_size; ++ u32 length; ++ u32 offset; ++ u32 flags; ++ s64 pts; ++ s64 dts; ++ void *type; ++ void *user_data; ++}; ++ ++struct mmal_buffer_header_type_specific { ++ union { ++ struct { ++ u32 planes; ++ u32 offset[4]; ++ u32 pitch[4]; ++ u32 flags; ++ } video; ++ } u; ++}; ++ ++struct mmal_msg_buffer_from_host { ++ /* The front 32 bytes of the buffer header are copied ++ * back to us in the reply to allow for context. This ++ * area is used to store two mmal_driver_buffer structures to ++ * allow for multiple concurrent service users. ++ */ ++ /* control data */ ++ struct mmal_driver_buffer drvbuf; ++ ++ /* referenced control data for passthrough buffer management */ ++ struct mmal_driver_buffer drvbuf_ref; ++ struct mmal_buffer_header buffer_header; /* buffer header itself */ ++ struct mmal_buffer_header_type_specific buffer_header_type_specific; ++ s32 is_zero_copy; ++ s32 has_reference; ++ ++ /** allows short data to be xfered in control message */ ++ u32 payload_in_message; ++ u8 short_data[MMAL_VC_SHORT_DATA]; ++}; ++ ++ ++/* port parameter setting */ ++ ++#define MMAL_WORKER_PORT_PARAMETER_SPACE 96 ++ ++struct mmal_msg_port_parameter_set { ++ u32 component_handle; /* component */ ++ u32 port_handle; /* port */ ++ u32 id; /* Parameter ID */ ++ u32 size; /* Parameter size */ ++ uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; ++}; ++ ++struct mmal_msg_port_parameter_set_reply { ++ u32 status; /** enum mmal_msg_status todo: how does this ++ * differ to the one in the header? ++ */ ++}; ++ ++/* port parameter getting */ ++ ++struct mmal_msg_port_parameter_get { ++ u32 component_handle; /* component */ ++ u32 port_handle; /* port */ ++ u32 id; /* Parameter ID */ ++ u32 size; /* Parameter size */ ++}; ++ ++struct mmal_msg_port_parameter_get_reply { ++ u32 status; /* Status of mmal_port_parameter_get call */ ++ u32 id; /* Parameter ID */ ++ u32 size; /* Parameter size */ ++ uint32_t value[MMAL_WORKER_PORT_PARAMETER_SPACE]; ++}; ++ ++/* event messages */ ++#define MMAL_WORKER_EVENT_SPACE 256 ++ ++struct mmal_msg_event_to_host { ++ void *client_component; /* component context */ ++ ++ u32 port_type; ++ u32 port_num; ++ ++ u32 cmd; ++ u32 length; ++ u8 data[MMAL_WORKER_EVENT_SPACE]; ++ struct mmal_buffer_header *delayed_buffer; ++}; ++ ++/* all mmal messages are serialised through this structure */ ++struct mmal_msg { ++ /* header */ ++ struct mmal_msg_header h; ++ /* payload */ ++ union { ++ struct mmal_msg_version version; ++ ++ struct mmal_msg_component_create component_create; ++ struct mmal_msg_component_create_reply component_create_reply; ++ ++ struct mmal_msg_component_destroy component_destroy; ++ struct mmal_msg_component_destroy_reply component_destroy_reply; ++ ++ struct mmal_msg_component_enable component_enable; ++ struct mmal_msg_component_enable_reply component_enable_reply; ++ ++ struct mmal_msg_component_disable component_disable; ++ struct mmal_msg_component_disable_reply component_disable_reply; ++ ++ struct mmal_msg_port_info_get port_info_get; ++ struct mmal_msg_port_info_get_reply port_info_get_reply; ++ ++ struct mmal_msg_port_info_set port_info_set; ++ struct mmal_msg_port_info_set_reply port_info_set_reply; ++ ++ struct mmal_msg_port_action_port port_action_port; ++ struct mmal_msg_port_action_handle port_action_handle; ++ struct mmal_msg_port_action_reply port_action_reply; ++ ++ struct mmal_msg_buffer_from_host buffer_from_host; ++ ++ struct mmal_msg_port_parameter_set port_parameter_set; ++ struct mmal_msg_port_parameter_set_reply ++ port_parameter_set_reply; ++ struct mmal_msg_port_parameter_get ++ port_parameter_get; ++ struct mmal_msg_port_parameter_get_reply ++ port_parameter_get_reply; ++ ++ struct mmal_msg_event_to_host event_to_host; ++ ++ u8 payload[MMAL_MSG_MAX_PAYLOAD]; ++ } u; ++}; +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-parameters.h +@@ -0,0 +1,689 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ */ ++ ++/* common parameters */ ++ ++/** @name Parameter groups ++ * Parameters are divided into groups, and then allocated sequentially within ++ * a group using an enum. ++ * @{ ++ */ ++ ++/** Common parameter ID group, used with many types of component. */ ++#define MMAL_PARAMETER_GROUP_COMMON (0<<16) ++/** Camera-specific parameter ID group. */ ++#define MMAL_PARAMETER_GROUP_CAMERA (1<<16) ++/** Video-specific parameter ID group. */ ++#define MMAL_PARAMETER_GROUP_VIDEO (2<<16) ++/** Audio-specific parameter ID group. */ ++#define MMAL_PARAMETER_GROUP_AUDIO (3<<16) ++/** Clock-specific parameter ID group. */ ++#define MMAL_PARAMETER_GROUP_CLOCK (4<<16) ++/** Miracast-specific parameter ID group. */ ++#define MMAL_PARAMETER_GROUP_MIRACAST (5<<16) ++ ++/* Common parameters */ ++enum mmal_parameter_common_type { ++ MMAL_PARAMETER_UNUSED /**< Never a valid parameter ID */ ++ = MMAL_PARAMETER_GROUP_COMMON, ++ MMAL_PARAMETER_SUPPORTED_ENCODINGS, /**< MMAL_PARAMETER_ENCODING_T */ ++ MMAL_PARAMETER_URI, /**< MMAL_PARAMETER_URI_T */ ++ ++ /** MMAL_PARAMETER_CHANGE_EVENT_REQUEST_T */ ++ MMAL_PARAMETER_CHANGE_EVENT_REQUEST, ++ ++ /** MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_ZERO_COPY, ++ ++ /**< MMAL_PARAMETER_BUFFER_REQUIREMENTS_T */ ++ MMAL_PARAMETER_BUFFER_REQUIREMENTS, ++ ++ MMAL_PARAMETER_STATISTICS, /**< MMAL_PARAMETER_STATISTICS_T */ ++ MMAL_PARAMETER_CORE_STATISTICS, /**< MMAL_PARAMETER_CORE_STATISTICS_T */ ++ MMAL_PARAMETER_MEM_USAGE, /**< MMAL_PARAMETER_MEM_USAGE_T */ ++ MMAL_PARAMETER_BUFFER_FLAG_FILTER, /**< MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_SEEK, /**< MMAL_PARAMETER_SEEK_T */ ++ MMAL_PARAMETER_POWERMON_ENABLE, /**< MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_LOGGING, /**< MMAL_PARAMETER_LOGGING_T */ ++ MMAL_PARAMETER_SYSTEM_TIME, /**< MMAL_PARAMETER_UINT64_T */ ++ MMAL_PARAMETER_NO_IMAGE_PADDING /**< MMAL_PARAMETER_BOOLEAN_T */ ++}; ++ ++/* camera parameters */ ++ ++enum mmal_parameter_camera_type { ++ /* 0 */ ++ /** @ref MMAL_PARAMETER_THUMBNAIL_CONFIG_T */ ++ MMAL_PARAMETER_THUMBNAIL_CONFIGURATION ++ = MMAL_PARAMETER_GROUP_CAMERA, ++ MMAL_PARAMETER_CAPTURE_QUALITY, /**< Unused? */ ++ MMAL_PARAMETER_ROTATION, /**< @ref MMAL_PARAMETER_INT32_T */ ++ MMAL_PARAMETER_EXIF_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_EXIF, /**< @ref MMAL_PARAMETER_EXIF_T */ ++ MMAL_PARAMETER_AWB_MODE, /**< @ref MMAL_PARAM_AWBMODE_T */ ++ MMAL_PARAMETER_IMAGE_EFFECT, /**< @ref MMAL_PARAMETER_IMAGEFX_T */ ++ MMAL_PARAMETER_COLOUR_EFFECT, /**< @ref MMAL_PARAMETER_COLOURFX_T */ ++ MMAL_PARAMETER_FLICKER_AVOID, /**< @ref MMAL_PARAMETER_FLICKERAVOID_T */ ++ MMAL_PARAMETER_FLASH, /**< @ref MMAL_PARAMETER_FLASH_T */ ++ MMAL_PARAMETER_REDEYE, /**< @ref MMAL_PARAMETER_REDEYE_T */ ++ MMAL_PARAMETER_FOCUS, /**< @ref MMAL_PARAMETER_FOCUS_T */ ++ MMAL_PARAMETER_FOCAL_LENGTHS, /**< Unused? */ ++ MMAL_PARAMETER_EXPOSURE_COMP, /**< @ref MMAL_PARAMETER_INT32_T */ ++ MMAL_PARAMETER_ZOOM, /**< @ref MMAL_PARAMETER_SCALEFACTOR_T */ ++ MMAL_PARAMETER_MIRROR, /**< @ref MMAL_PARAMETER_MIRROR_T */ ++ ++ /* 0x10 */ ++ MMAL_PARAMETER_CAMERA_NUM, /**< @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_CAPTURE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_EXPOSURE_MODE, /**< @ref MMAL_PARAMETER_EXPOSUREMODE_T */ ++ MMAL_PARAMETER_EXP_METERING_MODE, /**< @ref MMAL_PARAMETER_EXPOSUREMETERINGMODE_T */ ++ MMAL_PARAMETER_FOCUS_STATUS, /**< @ref MMAL_PARAMETER_FOCUS_STATUS_T */ ++ MMAL_PARAMETER_CAMERA_CONFIG, /**< @ref MMAL_PARAMETER_CAMERA_CONFIG_T */ ++ MMAL_PARAMETER_CAPTURE_STATUS, /**< @ref MMAL_PARAMETER_CAPTURE_STATUS_T */ ++ MMAL_PARAMETER_FACE_TRACK, /**< @ref MMAL_PARAMETER_FACE_TRACK_T */ ++ MMAL_PARAMETER_DRAW_BOX_FACES_AND_FOCUS, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_JPEG_Q_FACTOR, /**< @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_FRAME_RATE, /**< @ref MMAL_PARAMETER_FRAME_RATE_T */ ++ MMAL_PARAMETER_USE_STC, /**< @ref MMAL_PARAMETER_CAMERA_STC_MODE_T */ ++ MMAL_PARAMETER_CAMERA_INFO, /**< @ref MMAL_PARAMETER_CAMERA_INFO_T */ ++ MMAL_PARAMETER_VIDEO_STABILISATION, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_FACE_TRACK_RESULTS, /**< @ref MMAL_PARAMETER_FACE_TRACK_RESULTS_T */ ++ MMAL_PARAMETER_ENABLE_RAW_CAPTURE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ ++ /* 0x20 */ ++ MMAL_PARAMETER_DPF_FILE, /**< @ref MMAL_PARAMETER_URI_T */ ++ MMAL_PARAMETER_ENABLE_DPF_FILE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_DPF_FAIL_IS_FATAL, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_CAPTURE_MODE, /**< @ref MMAL_PARAMETER_CAPTUREMODE_T */ ++ MMAL_PARAMETER_FOCUS_REGIONS, /**< @ref MMAL_PARAMETER_FOCUS_REGIONS_T */ ++ MMAL_PARAMETER_INPUT_CROP, /**< @ref MMAL_PARAMETER_INPUT_CROP_T */ ++ MMAL_PARAMETER_SENSOR_INFORMATION, /**< @ref MMAL_PARAMETER_SENSOR_INFORMATION_T */ ++ MMAL_PARAMETER_FLASH_SELECT, /**< @ref MMAL_PARAMETER_FLASH_SELECT_T */ ++ MMAL_PARAMETER_FIELD_OF_VIEW, /**< @ref MMAL_PARAMETER_FIELD_OF_VIEW_T */ ++ MMAL_PARAMETER_HIGH_DYNAMIC_RANGE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_DYNAMIC_RANGE_COMPRESSION, /**< @ref MMAL_PARAMETER_DRC_T */ ++ MMAL_PARAMETER_ALGORITHM_CONTROL, /**< @ref MMAL_PARAMETER_ALGORITHM_CONTROL_T */ ++ MMAL_PARAMETER_SHARPNESS, /**< @ref MMAL_PARAMETER_RATIONAL_T */ ++ MMAL_PARAMETER_CONTRAST, /**< @ref MMAL_PARAMETER_RATIONAL_T */ ++ MMAL_PARAMETER_BRIGHTNESS, /**< @ref MMAL_PARAMETER_RATIONAL_T */ ++ MMAL_PARAMETER_SATURATION, /**< @ref MMAL_PARAMETER_RATIONAL_T */ ++ ++ /* 0x30 */ ++ MMAL_PARAMETER_ISO, /**< @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_ANTISHAKE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ ++ /** @ref MMAL_PARAMETER_IMAGEFX_PARAMETERS_T */ ++ MMAL_PARAMETER_IMAGE_EFFECT_PARAMETERS, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_CAMERA_BURST_CAPTURE, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_CAMERA_MIN_ISO, ++ ++ /** @ref MMAL_PARAMETER_CAMERA_USE_CASE_T */ ++ MMAL_PARAMETER_CAMERA_USE_CASE, ++ ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_CAPTURE_STATS_PASS, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_CAMERA_CUSTOM_SENSOR_CONFIG, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_ENABLE_REGISTER_FILE, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_REGISTER_FAIL_IS_FATAL, ++ ++ /** @ref MMAL_PARAMETER_CONFIGFILE_T */ ++ MMAL_PARAMETER_CONFIGFILE_REGISTERS, ++ ++ /** @ref MMAL_PARAMETER_CONFIGFILE_CHUNK_T */ ++ MMAL_PARAMETER_CONFIGFILE_CHUNK_REGISTERS, ++ MMAL_PARAMETER_JPEG_ATTACH_LOG, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_ZERO_SHUTTER_LAG, /**< @ref MMAL_PARAMETER_ZEROSHUTTERLAG_T */ ++ MMAL_PARAMETER_FPS_RANGE, /**< @ref MMAL_PARAMETER_FPS_RANGE_T */ ++ MMAL_PARAMETER_CAPTURE_EXPOSURE_COMP, /**< @ref MMAL_PARAMETER_INT32_T */ ++ ++ /* 0x40 */ ++ MMAL_PARAMETER_SW_SHARPEN_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_FLASH_REQUIRED, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_SW_SATURATION_DISABLE, /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_SHUTTER_SPEED, /**< Takes a @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_CUSTOM_AWB_GAINS, /**< Takes a @ref MMAL_PARAMETER_AWB_GAINS_T */ ++}; ++ ++struct mmal_parameter_rational { ++ s32 num; /**< Numerator */ ++ s32 den; /**< Denominator */ ++}; ++ ++enum mmal_parameter_camera_config_timestamp_mode { ++ MMAL_PARAM_TIMESTAMP_MODE_ZERO = 0, /* Always timestamp frames as 0 */ ++ MMAL_PARAM_TIMESTAMP_MODE_RAW_STC, /* Use the raw STC value ++ * for the frame timestamp ++ */ ++ MMAL_PARAM_TIMESTAMP_MODE_RESET_STC, /* Use the STC timestamp ++ * but subtract the ++ * timestamp of the first ++ * frame sent to give a ++ * zero based timestamp. ++ */ ++}; ++ ++struct mmal_parameter_fps_range { ++ /**< Low end of the permitted framerate range */ ++ struct mmal_parameter_rational fps_low; ++ /**< High end of the permitted framerate range */ ++ struct mmal_parameter_rational fps_high; ++}; ++ ++ ++/* camera configuration parameter */ ++struct mmal_parameter_camera_config { ++ /* Parameters for setting up the image pools */ ++ u32 max_stills_w; /* Max size of stills capture */ ++ u32 max_stills_h; ++ u32 stills_yuv422; /* Allow YUV422 stills capture */ ++ u32 one_shot_stills; /* Continuous or one shot stills captures. */ ++ ++ u32 max_preview_video_w; /* Max size of the preview or video ++ * capture frames ++ */ ++ u32 max_preview_video_h; ++ u32 num_preview_video_frames; ++ ++ /** Sets the height of the circular buffer for stills capture. */ ++ u32 stills_capture_circular_buffer_height; ++ ++ /** Allows preview/encode to resume as fast as possible after the stills ++ * input frame has been received, and then processes the still frame in ++ * the background whilst preview/encode has resumed. ++ * Actual mode is controlled by MMAL_PARAMETER_CAPTURE_MODE. ++ */ ++ u32 fast_preview_resume; ++ ++ /** Selects algorithm for timestamping frames if ++ * there is no clock component connected. ++ * enum mmal_parameter_camera_config_timestamp_mode ++ */ ++ s32 use_stc_timestamp; ++}; ++ ++ ++enum mmal_parameter_exposuremode { ++ MMAL_PARAM_EXPOSUREMODE_OFF, ++ MMAL_PARAM_EXPOSUREMODE_AUTO, ++ MMAL_PARAM_EXPOSUREMODE_NIGHT, ++ MMAL_PARAM_EXPOSUREMODE_NIGHTPREVIEW, ++ MMAL_PARAM_EXPOSUREMODE_BACKLIGHT, ++ MMAL_PARAM_EXPOSUREMODE_SPOTLIGHT, ++ MMAL_PARAM_EXPOSUREMODE_SPORTS, ++ MMAL_PARAM_EXPOSUREMODE_SNOW, ++ MMAL_PARAM_EXPOSUREMODE_BEACH, ++ MMAL_PARAM_EXPOSUREMODE_VERYLONG, ++ MMAL_PARAM_EXPOSUREMODE_FIXEDFPS, ++ MMAL_PARAM_EXPOSUREMODE_ANTISHAKE, ++ MMAL_PARAM_EXPOSUREMODE_FIREWORKS, ++}; ++ ++enum mmal_parameter_exposuremeteringmode { ++ MMAL_PARAM_EXPOSUREMETERINGMODE_AVERAGE, ++ MMAL_PARAM_EXPOSUREMETERINGMODE_SPOT, ++ MMAL_PARAM_EXPOSUREMETERINGMODE_BACKLIT, ++ MMAL_PARAM_EXPOSUREMETERINGMODE_MATRIX, ++}; ++ ++enum mmal_parameter_awbmode { ++ MMAL_PARAM_AWBMODE_OFF, ++ MMAL_PARAM_AWBMODE_AUTO, ++ MMAL_PARAM_AWBMODE_SUNLIGHT, ++ MMAL_PARAM_AWBMODE_CLOUDY, ++ MMAL_PARAM_AWBMODE_SHADE, ++ MMAL_PARAM_AWBMODE_TUNGSTEN, ++ MMAL_PARAM_AWBMODE_FLUORESCENT, ++ MMAL_PARAM_AWBMODE_INCANDESCENT, ++ MMAL_PARAM_AWBMODE_FLASH, ++ MMAL_PARAM_AWBMODE_HORIZON, ++}; ++ ++enum mmal_parameter_imagefx { ++ MMAL_PARAM_IMAGEFX_NONE, ++ MMAL_PARAM_IMAGEFX_NEGATIVE, ++ MMAL_PARAM_IMAGEFX_SOLARIZE, ++ MMAL_PARAM_IMAGEFX_POSTERIZE, ++ MMAL_PARAM_IMAGEFX_WHITEBOARD, ++ MMAL_PARAM_IMAGEFX_BLACKBOARD, ++ MMAL_PARAM_IMAGEFX_SKETCH, ++ MMAL_PARAM_IMAGEFX_DENOISE, ++ MMAL_PARAM_IMAGEFX_EMBOSS, ++ MMAL_PARAM_IMAGEFX_OILPAINT, ++ MMAL_PARAM_IMAGEFX_HATCH, ++ MMAL_PARAM_IMAGEFX_GPEN, ++ MMAL_PARAM_IMAGEFX_PASTEL, ++ MMAL_PARAM_IMAGEFX_WATERCOLOUR, ++ MMAL_PARAM_IMAGEFX_FILM, ++ MMAL_PARAM_IMAGEFX_BLUR, ++ MMAL_PARAM_IMAGEFX_SATURATION, ++ MMAL_PARAM_IMAGEFX_COLOURSWAP, ++ MMAL_PARAM_IMAGEFX_WASHEDOUT, ++ MMAL_PARAM_IMAGEFX_POSTERISE, ++ MMAL_PARAM_IMAGEFX_COLOURPOINT, ++ MMAL_PARAM_IMAGEFX_COLOURBALANCE, ++ MMAL_PARAM_IMAGEFX_CARTOON, ++}; ++ ++enum MMAL_PARAM_FLICKERAVOID_T { ++ MMAL_PARAM_FLICKERAVOID_OFF, ++ MMAL_PARAM_FLICKERAVOID_AUTO, ++ MMAL_PARAM_FLICKERAVOID_50HZ, ++ MMAL_PARAM_FLICKERAVOID_60HZ, ++ MMAL_PARAM_FLICKERAVOID_MAX = 0x7FFFFFFF ++}; ++ ++struct mmal_parameter_awbgains { ++ struct mmal_parameter_rational r_gain; /**< Red gain */ ++ struct mmal_parameter_rational b_gain; /**< Blue gain */ ++}; ++ ++/** Manner of video rate control */ ++enum mmal_parameter_rate_control_mode { ++ MMAL_VIDEO_RATECONTROL_DEFAULT, ++ MMAL_VIDEO_RATECONTROL_VARIABLE, ++ MMAL_VIDEO_RATECONTROL_CONSTANT, ++ MMAL_VIDEO_RATECONTROL_VARIABLE_SKIP_FRAMES, ++ MMAL_VIDEO_RATECONTROL_CONSTANT_SKIP_FRAMES ++}; ++ ++enum mmal_video_profile { ++ MMAL_VIDEO_PROFILE_H263_BASELINE, ++ MMAL_VIDEO_PROFILE_H263_H320CODING, ++ MMAL_VIDEO_PROFILE_H263_BACKWARDCOMPATIBLE, ++ MMAL_VIDEO_PROFILE_H263_ISWV2, ++ MMAL_VIDEO_PROFILE_H263_ISWV3, ++ MMAL_VIDEO_PROFILE_H263_HIGHCOMPRESSION, ++ MMAL_VIDEO_PROFILE_H263_INTERNET, ++ MMAL_VIDEO_PROFILE_H263_INTERLACE, ++ MMAL_VIDEO_PROFILE_H263_HIGHLATENCY, ++ MMAL_VIDEO_PROFILE_MP4V_SIMPLE, ++ MMAL_VIDEO_PROFILE_MP4V_SIMPLESCALABLE, ++ MMAL_VIDEO_PROFILE_MP4V_CORE, ++ MMAL_VIDEO_PROFILE_MP4V_MAIN, ++ MMAL_VIDEO_PROFILE_MP4V_NBIT, ++ MMAL_VIDEO_PROFILE_MP4V_SCALABLETEXTURE, ++ MMAL_VIDEO_PROFILE_MP4V_SIMPLEFACE, ++ MMAL_VIDEO_PROFILE_MP4V_SIMPLEFBA, ++ MMAL_VIDEO_PROFILE_MP4V_BASICANIMATED, ++ MMAL_VIDEO_PROFILE_MP4V_HYBRID, ++ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDREALTIME, ++ MMAL_VIDEO_PROFILE_MP4V_CORESCALABLE, ++ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDCODING, ++ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDCORE, ++ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDSCALABLE, ++ MMAL_VIDEO_PROFILE_MP4V_ADVANCEDSIMPLE, ++ MMAL_VIDEO_PROFILE_H264_BASELINE, ++ MMAL_VIDEO_PROFILE_H264_MAIN, ++ MMAL_VIDEO_PROFILE_H264_EXTENDED, ++ MMAL_VIDEO_PROFILE_H264_HIGH, ++ MMAL_VIDEO_PROFILE_H264_HIGH10, ++ MMAL_VIDEO_PROFILE_H264_HIGH422, ++ MMAL_VIDEO_PROFILE_H264_HIGH444, ++ MMAL_VIDEO_PROFILE_H264_CONSTRAINED_BASELINE, ++ MMAL_VIDEO_PROFILE_DUMMY = 0x7FFFFFFF ++}; ++ ++enum mmal_video_level { ++ MMAL_VIDEO_LEVEL_H263_10, ++ MMAL_VIDEO_LEVEL_H263_20, ++ MMAL_VIDEO_LEVEL_H263_30, ++ MMAL_VIDEO_LEVEL_H263_40, ++ MMAL_VIDEO_LEVEL_H263_45, ++ MMAL_VIDEO_LEVEL_H263_50, ++ MMAL_VIDEO_LEVEL_H263_60, ++ MMAL_VIDEO_LEVEL_H263_70, ++ MMAL_VIDEO_LEVEL_MP4V_0, ++ MMAL_VIDEO_LEVEL_MP4V_0b, ++ MMAL_VIDEO_LEVEL_MP4V_1, ++ MMAL_VIDEO_LEVEL_MP4V_2, ++ MMAL_VIDEO_LEVEL_MP4V_3, ++ MMAL_VIDEO_LEVEL_MP4V_4, ++ MMAL_VIDEO_LEVEL_MP4V_4a, ++ MMAL_VIDEO_LEVEL_MP4V_5, ++ MMAL_VIDEO_LEVEL_MP4V_6, ++ MMAL_VIDEO_LEVEL_H264_1, ++ MMAL_VIDEO_LEVEL_H264_1b, ++ MMAL_VIDEO_LEVEL_H264_11, ++ MMAL_VIDEO_LEVEL_H264_12, ++ MMAL_VIDEO_LEVEL_H264_13, ++ MMAL_VIDEO_LEVEL_H264_2, ++ MMAL_VIDEO_LEVEL_H264_21, ++ MMAL_VIDEO_LEVEL_H264_22, ++ MMAL_VIDEO_LEVEL_H264_3, ++ MMAL_VIDEO_LEVEL_H264_31, ++ MMAL_VIDEO_LEVEL_H264_32, ++ MMAL_VIDEO_LEVEL_H264_4, ++ MMAL_VIDEO_LEVEL_H264_41, ++ MMAL_VIDEO_LEVEL_H264_42, ++ MMAL_VIDEO_LEVEL_H264_5, ++ MMAL_VIDEO_LEVEL_H264_51, ++ MMAL_VIDEO_LEVEL_DUMMY = 0x7FFFFFFF ++}; ++ ++struct mmal_parameter_video_profile { ++ enum mmal_video_profile profile; ++ enum mmal_video_level level; ++}; ++ ++/* video parameters */ ++ ++enum mmal_parameter_video_type { ++ /** @ref MMAL_DISPLAYREGION_T */ ++ MMAL_PARAMETER_DISPLAYREGION = MMAL_PARAMETER_GROUP_VIDEO, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_PROFILE_T */ ++ MMAL_PARAMETER_SUPPORTED_PROFILES, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_PROFILE_T */ ++ MMAL_PARAMETER_PROFILE, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_INTRAPERIOD, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_RATECONTROL_T */ ++ MMAL_PARAMETER_RATECONTROL, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_NALUNITFORMAT_T */ ++ MMAL_PARAMETER_NALUNITFORMAT, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_MINIMISE_FRAGMENTATION, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. ++ * Setting the value to zero resets to the default (one slice per frame). ++ */ ++ MMAL_PARAMETER_MB_ROWS_PER_SLICE, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_LEVEL_EXTENSION_T */ ++ MMAL_PARAMETER_VIDEO_LEVEL_EXTENSION, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_EEDE_ENABLE_T */ ++ MMAL_PARAMETER_VIDEO_EEDE_ENABLE, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_EEDE_LOSSRATE_T */ ++ MMAL_PARAMETER_VIDEO_EEDE_LOSSRATE, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. Request an I-frame. */ ++ MMAL_PARAMETER_VIDEO_REQUEST_I_FRAME, ++ /** @ref MMAL_PARAMETER_VIDEO_INTRA_REFRESH_T */ ++ MMAL_PARAMETER_VIDEO_INTRA_REFRESH, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ ++ MMAL_PARAMETER_VIDEO_IMMUTABLE_INPUT, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. Run-time bit rate control */ ++ MMAL_PARAMETER_VIDEO_BIT_RATE, ++ ++ /** @ref MMAL_PARAMETER_FRAME_RATE_T */ ++ MMAL_PARAMETER_VIDEO_FRAME_RATE, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_MIN_QUANT, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_MAX_QUANT, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_ENCODE_RC_MODEL_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_RC_MODEL, ++ ++ MMAL_PARAMETER_EXTRA_BUFFERS, /**< @ref MMAL_PARAMETER_UINT32_T. */ ++ /** @ref MMAL_PARAMETER_UINT32_T. ++ * Changing this parameter from the default can reduce frame rate ++ * because image buffers need to be re-pitched. ++ */ ++ MMAL_PARAMETER_VIDEO_ALIGN_HORIZ, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. ++ * Changing this parameter from the default can reduce frame rate ++ * because image buffers need to be re-pitched. ++ */ ++ MMAL_PARAMETER_VIDEO_ALIGN_VERT, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ ++ MMAL_PARAMETER_VIDEO_DROPPABLE_PFRAMES, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_INITIAL_QUANT, ++ ++ /**< @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_QP_P, ++ ++ /**< @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_RC_SLICE_DQUANT, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_FRAME_LIMIT_BITS, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_PEAK_RATE, ++ ++ /* H264 specific parameters */ ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_DISABLE_CABAC, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_LATENCY, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_AU_DELIMITERS, ++ ++ /** @ref MMAL_PARAMETER_UINT32_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_DEBLOCK_IDC, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_ENCODER_H264_MB_INTRA_MODES_T. */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_MB_INTRA_MODE, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_HEADER_ON_OPEN, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_PRECODE_FOR_QP, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_DRM_INIT_INFO_T. */ ++ MMAL_PARAMETER_VIDEO_DRM_INIT_INFO, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_TIMESTAMP_FIFO, ++ ++ /** @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_DECODE_ERROR_CONCEALMENT, ++ ++ /** @ref MMAL_PARAMETER_VIDEO_DRM_PROTECT_BUFFER_T. */ ++ MMAL_PARAMETER_VIDEO_DRM_PROTECT_BUFFER, ++ ++ /** @ref MMAL_PARAMETER_BYTES_T */ ++ MMAL_PARAMETER_VIDEO_DECODE_CONFIG_VD3, ++ ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_VCL_HRD_PARAMETERS, ++ ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_H264_LOW_DELAY_HRD_FLAG, ++ ++ /**< @ref MMAL_PARAMETER_BOOLEAN_T */ ++ MMAL_PARAMETER_VIDEO_ENCODE_INLINE_HEADER ++}; ++ ++/** Valid mirror modes */ ++enum mmal_parameter_mirror { ++ MMAL_PARAM_MIRROR_NONE, ++ MMAL_PARAM_MIRROR_VERTICAL, ++ MMAL_PARAM_MIRROR_HORIZONTAL, ++ MMAL_PARAM_MIRROR_BOTH, ++}; ++ ++enum mmal_parameter_displaytransform { ++ MMAL_DISPLAY_ROT0 = 0, ++ MMAL_DISPLAY_MIRROR_ROT0 = 1, ++ MMAL_DISPLAY_MIRROR_ROT180 = 2, ++ MMAL_DISPLAY_ROT180 = 3, ++ MMAL_DISPLAY_MIRROR_ROT90 = 4, ++ MMAL_DISPLAY_ROT270 = 5, ++ MMAL_DISPLAY_ROT90 = 6, ++ MMAL_DISPLAY_MIRROR_ROT270 = 7, ++}; ++ ++enum mmal_parameter_displaymode { ++ MMAL_DISPLAY_MODE_FILL = 0, ++ MMAL_DISPLAY_MODE_LETTERBOX = 1, ++}; ++ ++enum mmal_parameter_displayset { ++ MMAL_DISPLAY_SET_NONE = 0, ++ MMAL_DISPLAY_SET_NUM = 1, ++ MMAL_DISPLAY_SET_FULLSCREEN = 2, ++ MMAL_DISPLAY_SET_TRANSFORM = 4, ++ MMAL_DISPLAY_SET_DEST_RECT = 8, ++ MMAL_DISPLAY_SET_SRC_RECT = 0x10, ++ MMAL_DISPLAY_SET_MODE = 0x20, ++ MMAL_DISPLAY_SET_PIXEL = 0x40, ++ MMAL_DISPLAY_SET_NOASPECT = 0x80, ++ MMAL_DISPLAY_SET_LAYER = 0x100, ++ MMAL_DISPLAY_SET_COPYPROTECT = 0x200, ++ MMAL_DISPLAY_SET_ALPHA = 0x400, ++}; ++ ++struct mmal_parameter_displayregion { ++ /** Bitfield that indicates which fields are set and should be ++ * used. All other fields will maintain their current value. ++ * \ref MMAL_DISPLAYSET_T defines the bits that can be ++ * combined. ++ */ ++ u32 set; ++ ++ /** Describes the display output device, with 0 typically ++ * being a directly connected LCD display. The actual values ++ * will depend on the hardware. Code using hard-wired numbers ++ * (e.g. 2) is certain to fail. ++ */ ++ ++ u32 display_num; ++ /** Indicates that we are using the full device screen area, ++ * rather than a window of the display. If zero, then ++ * dest_rect is used to specify a region of the display to ++ * use. ++ */ ++ ++ s32 fullscreen; ++ /** Indicates any rotation or flipping used to map frames onto ++ * the natural display orientation. ++ */ ++ u32 transform; /* enum mmal_parameter_displaytransform */ ++ ++ /** Where to display the frame within the screen, if ++ * fullscreen is zero. ++ */ ++ struct vchiq_mmal_rect dest_rect; ++ ++ /** Indicates which area of the frame to display. If all ++ * values are zero, the whole frame will be used. ++ */ ++ struct vchiq_mmal_rect src_rect; ++ ++ /** If set to non-zero, indicates that any display scaling ++ * should disregard the aspect ratio of the frame region being ++ * displayed. ++ */ ++ s32 noaspect; ++ ++ /** Indicates how the image should be scaled to fit the ++ * display. \code MMAL_DISPLAY_MODE_FILL \endcode indicates ++ * that the image should fill the screen by potentially ++ * cropping the frames. Setting \code mode \endcode to \code ++ * MMAL_DISPLAY_MODE_LETTERBOX \endcode indicates that all the ++ * source region should be displayed and black bars added if ++ * necessary. ++ */ ++ u32 mode; /* enum mmal_parameter_displaymode */ ++ ++ /** If non-zero, defines the width of a source pixel relative ++ * to \code pixel_y \endcode. If zero, then pixels default to ++ * being square. ++ */ ++ u32 pixel_x; ++ ++ /** If non-zero, defines the height of a source pixel relative ++ * to \code pixel_x \endcode. If zero, then pixels default to ++ * being square. ++ */ ++ u32 pixel_y; ++ ++ /** Sets the relative depth of the images, with greater values ++ * being in front of smaller values. ++ */ ++ u32 layer; ++ ++ /** Set to non-zero to ensure copy protection is used on ++ * output. ++ */ ++ s32 copyprotect_required; ++ ++ /** Level of opacity of the layer, where zero is fully ++ * transparent and 255 is fully opaque. ++ */ ++ u32 alpha; ++}; ++ ++#define MMAL_MAX_IMAGEFX_PARAMETERS 5 ++ ++struct mmal_parameter_imagefx_parameters { ++ enum mmal_parameter_imagefx effect; ++ u32 num_effect_params; ++ u32 effect_parameter[MMAL_MAX_IMAGEFX_PARAMETERS]; ++}; ++ ++#define MMAL_PARAMETER_CAMERA_INFO_MAX_CAMERAS 4 ++#define MMAL_PARAMETER_CAMERA_INFO_MAX_FLASHES 2 ++#define MMAL_PARAMETER_CAMERA_INFO_MAX_STR_LEN 16 ++ ++struct mmal_parameter_camera_info_camera_t { ++ u32 port_id; ++ u32 max_width; ++ u32 max_height; ++ u32 lens_present; ++ u8 camera_name[MMAL_PARAMETER_CAMERA_INFO_MAX_STR_LEN]; ++}; ++ ++enum mmal_parameter_camera_info_flash_type_t { ++ /* Make values explicit to ensure they match values in config ini */ ++ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_XENON = 0, ++ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_LED = 1, ++ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_OTHER = 2, ++ MMAL_PARAMETER_CAMERA_INFO_FLASH_TYPE_MAX = 0x7FFFFFFF ++}; ++ ++struct mmal_parameter_camera_info_flash_t { ++ enum mmal_parameter_camera_info_flash_type_t flash_type; ++}; ++ ++struct mmal_parameter_camera_info_t { ++ u32 num_cameras; ++ u32 num_flashes; ++ struct mmal_parameter_camera_info_camera_t ++ cameras[MMAL_PARAMETER_CAMERA_INFO_MAX_CAMERAS]; ++ struct mmal_parameter_camera_info_flash_t ++ flashes[MMAL_PARAMETER_CAMERA_INFO_MAX_FLASHES]; ++}; +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-vchiq.c +@@ -0,0 +1,1916 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ * ++ * V4L2 driver MMAL vchiq interface code ++ */ ++ ++#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "mmal-common.h" ++#include "mmal-vchiq.h" ++#include "mmal-msg.h" ++ ++#define USE_VCHIQ_ARM ++#include "interface/vchi/vchi.h" ++ ++/* maximum number of components supported */ ++#define VCHIQ_MMAL_MAX_COMPONENTS 4 ++ ++/*#define FULL_MSG_DUMP 1*/ ++ ++#ifdef DEBUG ++static const char *const msg_type_names[] = { ++ "UNKNOWN", ++ "QUIT", ++ "SERVICE_CLOSED", ++ "GET_VERSION", ++ "COMPONENT_CREATE", ++ "COMPONENT_DESTROY", ++ "COMPONENT_ENABLE", ++ "COMPONENT_DISABLE", ++ "PORT_INFO_GET", ++ "PORT_INFO_SET", ++ "PORT_ACTION", ++ "BUFFER_FROM_HOST", ++ "BUFFER_TO_HOST", ++ "GET_STATS", ++ "PORT_PARAMETER_SET", ++ "PORT_PARAMETER_GET", ++ "EVENT_TO_HOST", ++ "GET_CORE_STATS_FOR_PORT", ++ "OPAQUE_ALLOCATOR", ++ "CONSUME_MEM", ++ "LMK", ++ "OPAQUE_ALLOCATOR_DESC", ++ "DRM_GET_LHS32", ++ "DRM_GET_TIME", ++ "BUFFER_FROM_HOST_ZEROLEN", ++ "PORT_FLUSH", ++ "HOST_LOG", ++}; ++#endif ++ ++static const char *const port_action_type_names[] = { ++ "UNKNOWN", ++ "ENABLE", ++ "DISABLE", ++ "FLUSH", ++ "CONNECT", ++ "DISCONNECT", ++ "SET_REQUIREMENTS", ++}; ++ ++#if defined(DEBUG) ++#if defined(FULL_MSG_DUMP) ++#define DBG_DUMP_MSG(MSG, MSG_LEN, TITLE) \ ++ do { \ ++ pr_debug(TITLE" type:%s(%d) length:%d\n", \ ++ msg_type_names[(MSG)->h.type], \ ++ (MSG)->h.type, (MSG_LEN)); \ ++ print_hex_dump(KERN_DEBUG, "<h.type], \ ++ (MSG)->h.type, (MSG_LEN)); \ ++ } ++#endif ++#else ++#define DBG_DUMP_MSG(MSG, MSG_LEN, TITLE) ++#endif ++ ++/* normal message context */ ++struct mmal_msg_context { ++ union { ++ struct { ++ /* work struct for defered callback - must come first */ ++ struct work_struct work; ++ /* mmal instance */ ++ struct vchiq_mmal_instance *instance; ++ /* mmal port */ ++ struct vchiq_mmal_port *port; ++ /* actual buffer used to store bulk reply */ ++ struct mmal_buffer *buffer; ++ /* amount of buffer used */ ++ unsigned long buffer_used; ++ /* MMAL buffer flags */ ++ u32 mmal_flags; ++ /* Presentation and Decode timestamps */ ++ s64 pts; ++ s64 dts; ++ ++ int status; /* context status */ ++ ++ } bulk; /* bulk data */ ++ ++ struct { ++ /* message handle to release */ ++ VCHI_HELD_MSG_T msg_handle; ++ /* pointer to received message */ ++ struct mmal_msg *msg; ++ /* received message length */ ++ u32 msg_len; ++ /* completion upon reply */ ++ struct completion cmplt; ++ } sync; /* synchronous response */ ++ } u; ++ ++}; ++ ++struct vchiq_mmal_instance { ++ VCHI_SERVICE_HANDLE_T handle; ++ ++ /* ensure serialised access to service */ ++ struct mutex vchiq_mutex; ++ ++ /* ensure serialised access to bulk operations */ ++ struct mutex bulk_mutex; ++ ++ /* vmalloc page to receive scratch bulk xfers into */ ++ void *bulk_scratch; ++ ++ /* component to use next */ ++ int component_idx; ++ struct vchiq_mmal_component component[VCHIQ_MMAL_MAX_COMPONENTS]; ++}; ++ ++static struct mmal_msg_context *get_msg_context(struct vchiq_mmal_instance ++ *instance) ++{ ++ struct mmal_msg_context *msg_context; ++ ++ /* todo: should this be allocated from a pool to avoid kmalloc */ ++ msg_context = kmalloc(sizeof(*msg_context), GFP_KERNEL); ++ memset(msg_context, 0, sizeof(*msg_context)); ++ ++ return msg_context; ++} ++ ++static void release_msg_context(struct mmal_msg_context *msg_context) ++{ ++ kfree(msg_context); ++} ++ ++/* deals with receipt of event to host message */ ++static void event_to_host_cb(struct vchiq_mmal_instance *instance, ++ struct mmal_msg *msg, u32 msg_len) ++{ ++ pr_debug("unhandled event\n"); ++ pr_debug("component:%p port type:%d num:%d cmd:0x%x length:%d\n", ++ msg->u.event_to_host.client_component, ++ msg->u.event_to_host.port_type, ++ msg->u.event_to_host.port_num, ++ msg->u.event_to_host.cmd, msg->u.event_to_host.length); ++} ++ ++/* workqueue scheduled callback ++ * ++ * we do this because it is important we do not call any other vchiq ++ * sync calls from witin the message delivery thread ++ */ ++static void buffer_work_cb(struct work_struct *work) ++{ ++ struct mmal_msg_context *msg_context = (struct mmal_msg_context *)work; ++ ++ msg_context->u.bulk.port->buffer_cb(msg_context->u.bulk.instance, ++ msg_context->u.bulk.port, ++ msg_context->u.bulk.status, ++ msg_context->u.bulk.buffer, ++ msg_context->u.bulk.buffer_used, ++ msg_context->u.bulk.mmal_flags, ++ msg_context->u.bulk.dts, ++ msg_context->u.bulk.pts); ++ ++ /* release message context */ ++ release_msg_context(msg_context); ++} ++ ++/* enqueue a bulk receive for a given message context */ ++static int bulk_receive(struct vchiq_mmal_instance *instance, ++ struct mmal_msg *msg, ++ struct mmal_msg_context *msg_context) ++{ ++ unsigned long rd_len; ++ unsigned long flags = 0; ++ int ret; ++ ++ /* bulk mutex stops other bulk operations while we have a ++ * receive in progress - released in callback ++ */ ++ ret = mutex_lock_interruptible(&instance->bulk_mutex); ++ if (ret != 0) ++ return ret; ++ ++ rd_len = msg->u.buffer_from_host.buffer_header.length; ++ ++ /* take buffer from queue */ ++ spin_lock_irqsave(&msg_context->u.bulk.port->slock, flags); ++ if (list_empty(&msg_context->u.bulk.port->buffers)) { ++ spin_unlock_irqrestore(&msg_context->u.bulk.port->slock, flags); ++ pr_err("buffer list empty trying to submit bulk receive\n"); ++ ++ /* todo: this is a serious error, we should never have ++ * commited a buffer_to_host operation to the mmal ++ * port without the buffer to back it up (underflow ++ * handling) and there is no obvious way to deal with ++ * this - how is the mmal servie going to react when ++ * we fail to do the xfer and reschedule a buffer when ++ * it arrives? perhaps a starved flag to indicate a ++ * waiting bulk receive? ++ */ ++ ++ mutex_unlock(&instance->bulk_mutex); ++ ++ return -EINVAL; ++ } ++ ++ msg_context->u.bulk.buffer = ++ list_entry(msg_context->u.bulk.port->buffers.next, ++ struct mmal_buffer, list); ++ list_del(&msg_context->u.bulk.buffer->list); ++ ++ spin_unlock_irqrestore(&msg_context->u.bulk.port->slock, flags); ++ ++ /* ensure we do not overrun the available buffer */ ++ if (rd_len > msg_context->u.bulk.buffer->buffer_size) { ++ rd_len = msg_context->u.bulk.buffer->buffer_size; ++ pr_warn("short read as not enough receive buffer space\n"); ++ /* todo: is this the correct response, what happens to ++ * the rest of the message data? ++ */ ++ } ++ ++ /* store length */ ++ msg_context->u.bulk.buffer_used = rd_len; ++ msg_context->u.bulk.mmal_flags = ++ msg->u.buffer_from_host.buffer_header.flags; ++ msg_context->u.bulk.dts = msg->u.buffer_from_host.buffer_header.dts; ++ msg_context->u.bulk.pts = msg->u.buffer_from_host.buffer_header.pts; ++ ++ // only need to flush L1 cache here, as VCHIQ takes care of the L2 ++ // cache. ++ __cpuc_flush_dcache_area(msg_context->u.bulk.buffer->buffer, rd_len); ++ ++ /* queue the bulk submission */ ++ vchi_service_use(instance->handle); ++ ret = vchi_bulk_queue_receive(instance->handle, ++ msg_context->u.bulk.buffer->buffer, ++ /* Actual receive needs to be a multiple ++ * of 4 bytes ++ */ ++ (rd_len + 3) & ~3, ++ VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, ++ msg_context); ++ ++ vchi_service_release(instance->handle); ++ ++ if (ret != 0) { ++ /* callback will not be clearing the mutex */ ++ mutex_unlock(&instance->bulk_mutex); ++ } ++ ++ return ret; ++} ++ ++/* enque a dummy bulk receive for a given message context */ ++static int dummy_bulk_receive(struct vchiq_mmal_instance *instance, ++ struct mmal_msg_context *msg_context) ++{ ++ int ret; ++ ++ /* bulk mutex stops other bulk operations while we have a ++ * receive in progress - released in callback ++ */ ++ ret = mutex_lock_interruptible(&instance->bulk_mutex); ++ if (ret != 0) ++ return ret; ++ ++ /* zero length indicates this was a dummy transfer */ ++ msg_context->u.bulk.buffer_used = 0; ++ ++ /* queue the bulk submission */ ++ vchi_service_use(instance->handle); ++ ++ ret = vchi_bulk_queue_receive(instance->handle, ++ instance->bulk_scratch, ++ 8, ++ VCHI_FLAGS_CALLBACK_WHEN_OP_COMPLETE | ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, ++ msg_context); ++ ++ vchi_service_release(instance->handle); ++ ++ if (ret != 0) { ++ /* callback will not be clearing the mutex */ ++ mutex_unlock(&instance->bulk_mutex); ++ } ++ ++ return ret; ++} ++ ++/* data in message, memcpy from packet into output buffer */ ++static int inline_receive(struct vchiq_mmal_instance *instance, ++ struct mmal_msg *msg, ++ struct mmal_msg_context *msg_context) ++{ ++ unsigned long flags = 0; ++ ++ /* take buffer from queue */ ++ spin_lock_irqsave(&msg_context->u.bulk.port->slock, flags); ++ if (list_empty(&msg_context->u.bulk.port->buffers)) { ++ spin_unlock_irqrestore(&msg_context->u.bulk.port->slock, flags); ++ pr_err("buffer list empty trying to receive inline\n"); ++ ++ /* todo: this is a serious error, we should never have ++ * commited a buffer_to_host operation to the mmal ++ * port without the buffer to back it up (with ++ * underflow handling) and there is no obvious way to ++ * deal with this. Less bad than the bulk case as we ++ * can just drop this on the floor but...unhelpful ++ */ ++ return -EINVAL; ++ } ++ ++ msg_context->u.bulk.buffer = ++ list_entry(msg_context->u.bulk.port->buffers.next, ++ struct mmal_buffer, list); ++ list_del(&msg_context->u.bulk.buffer->list); ++ ++ spin_unlock_irqrestore(&msg_context->u.bulk.port->slock, flags); ++ ++ memcpy(msg_context->u.bulk.buffer->buffer, ++ msg->u.buffer_from_host.short_data, ++ msg->u.buffer_from_host.payload_in_message); ++ ++ msg_context->u.bulk.buffer_used = ++ msg->u.buffer_from_host.payload_in_message; ++ ++ return 0; ++} ++ ++/* queue the buffer availability with MMAL_MSG_TYPE_BUFFER_FROM_HOST */ ++static int ++buffer_from_host(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, struct mmal_buffer *buf) ++{ ++ struct mmal_msg_context *msg_context; ++ struct mmal_msg m; ++ int ret; ++ ++ pr_debug("instance:%p buffer:%p\n", instance->handle, buf); ++ ++ /* bulk mutex stops other bulk operations while we ++ * have a receive in progress ++ */ ++ if (mutex_lock_interruptible(&instance->bulk_mutex)) ++ return -EINTR; ++ ++ /* get context */ ++ msg_context = get_msg_context(instance); ++ if (msg_context == NULL) ++ return -ENOMEM; ++ ++ /* store bulk message context for when data arrives */ ++ msg_context->u.bulk.instance = instance; ++ msg_context->u.bulk.port = port; ++ msg_context->u.bulk.buffer = NULL; /* not valid until bulk xfer */ ++ msg_context->u.bulk.buffer_used = 0; ++ ++ /* initialise work structure ready to schedule callback */ ++ INIT_WORK(&msg_context->u.bulk.work, buffer_work_cb); ++ ++ /* prep the buffer from host message */ ++ memset(&m, 0xbc, sizeof(m)); /* just to make debug clearer */ ++ ++ m.h.type = MMAL_MSG_TYPE_BUFFER_FROM_HOST; ++ m.h.magic = MMAL_MAGIC; ++ m.h.context = msg_context; ++ m.h.status = 0; ++ ++ /* drvbuf is our private data passed back */ ++ m.u.buffer_from_host.drvbuf.magic = MMAL_MAGIC; ++ m.u.buffer_from_host.drvbuf.component_handle = port->component->handle; ++ m.u.buffer_from_host.drvbuf.port_handle = port->handle; ++ m.u.buffer_from_host.drvbuf.client_context = msg_context; ++ ++ /* buffer header */ ++ m.u.buffer_from_host.buffer_header.cmd = 0; ++ m.u.buffer_from_host.buffer_header.data = buf->buffer; ++ m.u.buffer_from_host.buffer_header.alloc_size = buf->buffer_size; ++ m.u.buffer_from_host.buffer_header.length = 0; /* nothing used yet */ ++ m.u.buffer_from_host.buffer_header.offset = 0; /* no offset */ ++ m.u.buffer_from_host.buffer_header.flags = 0; /* no flags */ ++ m.u.buffer_from_host.buffer_header.pts = MMAL_TIME_UNKNOWN; ++ m.u.buffer_from_host.buffer_header.dts = MMAL_TIME_UNKNOWN; ++ ++ /* clear buffer type sepecific data */ ++ memset(&m.u.buffer_from_host.buffer_header_type_specific, 0, ++ sizeof(m.u.buffer_from_host.buffer_header_type_specific)); ++ ++ /* no payload in message */ ++ m.u.buffer_from_host.payload_in_message = 0; ++ ++ vchi_service_use(instance->handle); ++ ++ ret = vchi_msg_queue(instance->handle, &m, ++ sizeof(struct mmal_msg_header) + ++ sizeof(m.u.buffer_from_host), ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ if (ret != 0) { ++ release_msg_context(msg_context); ++ /* todo: is this correct error value? */ ++ } ++ ++ vchi_service_release(instance->handle); ++ ++ mutex_unlock(&instance->bulk_mutex); ++ ++ return ret; ++} ++ ++/* submit a buffer to the mmal sevice ++ * ++ * the buffer_from_host uses size data from the ports next available ++ * mmal_buffer and deals with there being no buffer available by ++ * incrementing the underflow for later ++ */ ++static int port_buffer_from_host(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ struct mmal_buffer *buf; ++ unsigned long flags = 0; ++ ++ if (!port->enabled) ++ return -EINVAL; ++ ++ /* peek buffer from queue */ ++ spin_lock_irqsave(&port->slock, flags); ++ if (list_empty(&port->buffers)) { ++ port->buffer_underflow++; ++ spin_unlock_irqrestore(&port->slock, flags); ++ return -ENOSPC; ++ } ++ ++ buf = list_entry(port->buffers.next, struct mmal_buffer, list); ++ ++ spin_unlock_irqrestore(&port->slock, flags); ++ ++ /* issue buffer to mmal service */ ++ ret = buffer_from_host(instance, port, buf); ++ if (ret) { ++ pr_err("adding buffer header failed\n"); ++ /* todo: how should this be dealt with */ ++ } ++ ++ return ret; ++} ++ ++/* deals with receipt of buffer to host message */ ++static void buffer_to_host_cb(struct vchiq_mmal_instance *instance, ++ struct mmal_msg *msg, u32 msg_len) ++{ ++ struct mmal_msg_context *msg_context; ++ ++ pr_debug("buffer_to_host_cb: instance:%p msg:%p msg_len:%d\n", ++ instance, msg, msg_len); ++ ++ if (msg->u.buffer_from_host.drvbuf.magic == MMAL_MAGIC) { ++ msg_context = msg->u.buffer_from_host.drvbuf.client_context; ++ } else { ++ pr_err("MMAL_MSG_TYPE_BUFFER_TO_HOST with bad magic\n"); ++ return; ++ } ++ ++ if (msg->h.status != MMAL_MSG_STATUS_SUCCESS) { ++ /* message reception had an error */ ++ pr_warn("error %d in reply\n", msg->h.status); ++ ++ msg_context->u.bulk.status = msg->h.status; ++ ++ } else if (msg->u.buffer_from_host.buffer_header.length == 0) { ++ /* empty buffer */ ++ if (msg->u.buffer_from_host.buffer_header.flags & ++ MMAL_BUFFER_HEADER_FLAG_EOS) { ++ msg_context->u.bulk.status = ++ dummy_bulk_receive(instance, msg_context); ++ if (msg_context->u.bulk.status == 0) ++ return; /* successful bulk submission, bulk ++ * completion will trigger callback ++ */ ++ } else { ++ /* do callback with empty buffer - not EOS though */ ++ msg_context->u.bulk.status = 0; ++ msg_context->u.bulk.buffer_used = 0; ++ } ++ } else if (msg->u.buffer_from_host.payload_in_message == 0) { ++ /* data is not in message, queue a bulk receive */ ++ msg_context->u.bulk.status = ++ bulk_receive(instance, msg, msg_context); ++ if (msg_context->u.bulk.status == 0) ++ return; /* successful bulk submission, bulk ++ * completion will trigger callback ++ */ ++ ++ /* failed to submit buffer, this will end badly */ ++ pr_err("error %d on bulk submission\n", ++ msg_context->u.bulk.status); ++ ++ } else if (msg->u.buffer_from_host.payload_in_message <= ++ MMAL_VC_SHORT_DATA) { ++ /* data payload within message */ ++ msg_context->u.bulk.status = inline_receive(instance, msg, ++ msg_context); ++ } else { ++ pr_err("message with invalid short payload\n"); ++ ++ /* signal error */ ++ msg_context->u.bulk.status = -EINVAL; ++ msg_context->u.bulk.buffer_used = ++ msg->u.buffer_from_host.payload_in_message; ++ } ++ ++ /* replace the buffer header */ ++ port_buffer_from_host(instance, msg_context->u.bulk.port); ++ ++ /* schedule the port callback */ ++ schedule_work(&msg_context->u.bulk.work); ++} ++ ++static void bulk_receive_cb(struct vchiq_mmal_instance *instance, ++ struct mmal_msg_context *msg_context) ++{ ++ /* bulk receive operation complete */ ++ mutex_unlock(&msg_context->u.bulk.instance->bulk_mutex); ++ ++ /* replace the buffer header */ ++ port_buffer_from_host(msg_context->u.bulk.instance, ++ msg_context->u.bulk.port); ++ ++ msg_context->u.bulk.status = 0; ++ ++ /* schedule the port callback */ ++ schedule_work(&msg_context->u.bulk.work); ++} ++ ++static void bulk_abort_cb(struct vchiq_mmal_instance *instance, ++ struct mmal_msg_context *msg_context) ++{ ++ pr_err("%s: bulk ABORTED msg_context:%p\n", __func__, msg_context); ++ ++ /* bulk receive operation complete */ ++ mutex_unlock(&msg_context->u.bulk.instance->bulk_mutex); ++ ++ /* replace the buffer header */ ++ port_buffer_from_host(msg_context->u.bulk.instance, ++ msg_context->u.bulk.port); ++ ++ msg_context->u.bulk.status = -EINTR; ++ ++ schedule_work(&msg_context->u.bulk.work); ++} ++ ++/* incoming event service callback */ ++static void service_callback(void *param, ++ const VCHI_CALLBACK_REASON_T reason, ++ void *bulk_ctx) ++{ ++ struct vchiq_mmal_instance *instance = param; ++ int status; ++ u32 msg_len; ++ struct mmal_msg *msg; ++ VCHI_HELD_MSG_T msg_handle; ++ ++ if (!instance) { ++ pr_err("Message callback passed NULL instance\n"); ++ return; ++ } ++ ++ switch (reason) { ++ case VCHI_CALLBACK_MSG_AVAILABLE: ++ status = vchi_msg_hold(instance->handle, (void **)&msg, ++ &msg_len, VCHI_FLAGS_NONE, &msg_handle); ++ if (status) { ++ pr_err("Unable to dequeue a message (%d)\n", status); ++ break; ++ } ++ ++ DBG_DUMP_MSG(msg, msg_len, "<<< reply message"); ++ ++ /* handling is different for buffer messages */ ++ switch (msg->h.type) { ++ ++ case MMAL_MSG_TYPE_BUFFER_FROM_HOST: ++ vchi_held_msg_release(&msg_handle); ++ break; ++ ++ case MMAL_MSG_TYPE_EVENT_TO_HOST: ++ event_to_host_cb(instance, msg, msg_len); ++ vchi_held_msg_release(&msg_handle); ++ ++ break; ++ ++ case MMAL_MSG_TYPE_BUFFER_TO_HOST: ++ buffer_to_host_cb(instance, msg, msg_len); ++ vchi_held_msg_release(&msg_handle); ++ break; ++ ++ default: ++ /* messages dependant on header context to complete */ ++ ++ /* todo: the msg.context really ought to be sanity ++ * checked before we just use it, afaict it comes back ++ * and is used raw from the videocore. Perhaps it ++ * should be verified the address lies in the kernel ++ * address space. ++ */ ++ if (msg->h.context == NULL) { ++ pr_err("received message context was null!\n"); ++ vchi_held_msg_release(&msg_handle); ++ break; ++ } ++ ++ /* fill in context values */ ++ msg->h.context->u.sync.msg_handle = msg_handle; ++ msg->h.context->u.sync.msg = msg; ++ msg->h.context->u.sync.msg_len = msg_len; ++ ++ /* todo: should this check (completion_done() ++ * == 1) for no one waiting? or do we need a ++ * flag to tell us the completion has been ++ * interrupted so we can free the message and ++ * its context. This probably also solves the ++ * message arriving after interruption todo ++ * below ++ */ ++ ++ /* complete message so caller knows it happened */ ++ complete(&msg->h.context->u.sync.cmplt); ++ break; ++ } ++ ++ break; ++ ++ case VCHI_CALLBACK_BULK_RECEIVED: ++ bulk_receive_cb(instance, bulk_ctx); ++ break; ++ ++ case VCHI_CALLBACK_BULK_RECEIVE_ABORTED: ++ bulk_abort_cb(instance, bulk_ctx); ++ break; ++ ++ case VCHI_CALLBACK_SERVICE_CLOSED: ++ /* TODO: consider if this requires action if received when ++ * driver is not explicitly closing the service ++ */ ++ break; ++ ++ default: ++ pr_err("Received unhandled message reason %d\n", reason); ++ break; ++ } ++} ++ ++static int send_synchronous_mmal_msg(struct vchiq_mmal_instance *instance, ++ struct mmal_msg *msg, ++ unsigned int payload_len, ++ struct mmal_msg **msg_out, ++ VCHI_HELD_MSG_T *msg_handle_out) ++{ ++ struct mmal_msg_context msg_context; ++ int ret; ++ ++ /* payload size must not cause message to exceed max size */ ++ if (payload_len > ++ (MMAL_MSG_MAX_SIZE - sizeof(struct mmal_msg_header))) { ++ pr_err("payload length %d exceeds max:%d\n", payload_len, ++ (MMAL_MSG_MAX_SIZE - sizeof(struct mmal_msg_header))); ++ return -EINVAL; ++ } ++ ++ init_completion(&msg_context.u.sync.cmplt); ++ ++ msg->h.magic = MMAL_MAGIC; ++ msg->h.context = &msg_context; ++ msg->h.status = 0; ++ ++ DBG_DUMP_MSG(msg, (sizeof(struct mmal_msg_header) + payload_len), ++ ">>> sync message"); ++ ++ vchi_service_use(instance->handle); ++ ++ ret = vchi_msg_queue(instance->handle, ++ msg, ++ sizeof(struct mmal_msg_header) + payload_len, ++ VCHI_FLAGS_BLOCK_UNTIL_QUEUED, NULL); ++ ++ vchi_service_release(instance->handle); ++ ++ if (ret) { ++ pr_err("error %d queuing message\n", ret); ++ return ret; ++ } ++ ++ ret = wait_for_completion_timeout(&msg_context.u.sync.cmplt, 3*HZ); ++ if (ret <= 0) { ++ pr_err("error %d waiting for sync completion\n", ret); ++ if (ret == 0) ++ ret = -ETIME; ++ /* todo: what happens if the message arrives after aborting */ ++ return ret; ++ } ++ ++ *msg_out = msg_context.u.sync.msg; ++ *msg_handle_out = msg_context.u.sync.msg_handle; ++ ++ return 0; ++} ++ ++static void dump_port_info(struct vchiq_mmal_port *port) ++{ ++ pr_debug("port handle:0x%x enabled:%d\n", port->handle, port->enabled); ++ ++ pr_debug("buffer minimum num:%d size:%d align:%d\n", ++ port->minimum_buffer.num, ++ port->minimum_buffer.size, port->minimum_buffer.alignment); ++ ++ pr_debug("buffer recommended num:%d size:%d align:%d\n", ++ port->recommended_buffer.num, ++ port->recommended_buffer.size, ++ port->recommended_buffer.alignment); ++ ++ pr_debug("buffer current values num:%d size:%d align:%d\n", ++ port->current_buffer.num, ++ port->current_buffer.size, port->current_buffer.alignment); ++ ++ pr_debug("elementry stream: type:%d encoding:0x%x varient:0x%x\n", ++ port->format.type, ++ port->format.encoding, port->format.encoding_variant); ++ ++ pr_debug(" bitrate:%d flags:0x%x\n", ++ port->format.bitrate, port->format.flags); ++ ++ if (port->format.type == MMAL_ES_TYPE_VIDEO) { ++ pr_debug ++ ("es video format: width:%d height:%d colourspace:0x%x\n", ++ port->es.video.width, port->es.video.height, ++ port->es.video.color_space); ++ ++ pr_debug(" : crop xywh %d,%d,%d,%d\n", ++ port->es.video.crop.x, ++ port->es.video.crop.y, ++ port->es.video.crop.width, port->es.video.crop.height); ++ pr_debug(" : framerate %d/%d aspect %d/%d\n", ++ port->es.video.frame_rate.num, ++ port->es.video.frame_rate.den, ++ port->es.video.par.num, port->es.video.par.den); ++ } ++} ++ ++static void port_to_mmal_msg(struct vchiq_mmal_port *port, struct mmal_port *p) ++{ ++ ++ /* todo do readonly fields need setting at all? */ ++ p->type = port->type; ++ p->index = port->index; ++ p->index_all = 0; ++ p->is_enabled = port->enabled; ++ p->buffer_num_min = port->minimum_buffer.num; ++ p->buffer_size_min = port->minimum_buffer.size; ++ p->buffer_alignment_min = port->minimum_buffer.alignment; ++ p->buffer_num_recommended = port->recommended_buffer.num; ++ p->buffer_size_recommended = port->recommended_buffer.size; ++ ++ /* only three writable fields in a port */ ++ p->buffer_num = port->current_buffer.num; ++ p->buffer_size = port->current_buffer.size; ++ p->userdata = port; ++} ++ ++static int port_info_set(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ pr_debug("setting port info port %p\n", port); ++ if (!port) ++ return -1; ++ dump_port_info(port); ++ ++ m.h.type = MMAL_MSG_TYPE_PORT_INFO_SET; ++ ++ m.u.port_info_set.component_handle = port->component->handle; ++ m.u.port_info_set.port_type = port->type; ++ m.u.port_info_set.port_index = port->index; ++ ++ port_to_mmal_msg(port, &m.u.port_info_set.port); ++ ++ /* elementry stream format setup */ ++ m.u.port_info_set.format.type = port->format.type; ++ m.u.port_info_set.format.encoding = port->format.encoding; ++ m.u.port_info_set.format.encoding_variant = ++ port->format.encoding_variant; ++ m.u.port_info_set.format.bitrate = port->format.bitrate; ++ m.u.port_info_set.format.flags = port->format.flags; ++ ++ memcpy(&m.u.port_info_set.es, &port->es, ++ sizeof(union mmal_es_specific_format)); ++ ++ m.u.port_info_set.format.extradata_size = port->format.extradata_size; ++ memcpy(&m.u.port_info_set.extradata, port->format.extradata, ++ port->format.extradata_size); ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.port_info_set), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_INFO_SET) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ /* return operation status */ ++ ret = -rmsg->u.port_info_get_reply.status; ++ ++ pr_debug("%s:result:%d component:0x%x port:%d\n", __func__, ret, ++ port->component->handle, port->handle); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++ ++} ++ ++/* use port info get message to retrive port information */ ++static int port_info_get(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ /* port info time */ ++ m.h.type = MMAL_MSG_TYPE_PORT_INFO_GET; ++ m.u.port_info_get.component_handle = port->component->handle; ++ m.u.port_info_get.port_type = port->type; ++ m.u.port_info_get.index = port->index; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.port_info_get), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_INFO_GET) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ /* return operation status */ ++ ret = -rmsg->u.port_info_get_reply.status; ++ if (ret != MMAL_MSG_STATUS_SUCCESS) ++ goto release_msg; ++ ++ if (rmsg->u.port_info_get_reply.port.is_enabled == 0) ++ port->enabled = false; ++ else ++ port->enabled = true; ++ ++ /* copy the values out of the message */ ++ port->handle = rmsg->u.port_info_get_reply.port_handle; ++ ++ /* port type and index cached to use on port info set becuase ++ * it does not use a port handle ++ */ ++ port->type = rmsg->u.port_info_get_reply.port_type; ++ port->index = rmsg->u.port_info_get_reply.port_index; ++ ++ port->minimum_buffer.num = ++ rmsg->u.port_info_get_reply.port.buffer_num_min; ++ port->minimum_buffer.size = ++ rmsg->u.port_info_get_reply.port.buffer_size_min; ++ port->minimum_buffer.alignment = ++ rmsg->u.port_info_get_reply.port.buffer_alignment_min; ++ ++ port->recommended_buffer.alignment = ++ rmsg->u.port_info_get_reply.port.buffer_alignment_min; ++ port->recommended_buffer.num = ++ rmsg->u.port_info_get_reply.port.buffer_num_recommended; ++ ++ port->current_buffer.num = rmsg->u.port_info_get_reply.port.buffer_num; ++ port->current_buffer.size = ++ rmsg->u.port_info_get_reply.port.buffer_size; ++ ++ /* stream format */ ++ port->format.type = rmsg->u.port_info_get_reply.format.type; ++ port->format.encoding = rmsg->u.port_info_get_reply.format.encoding; ++ port->format.encoding_variant = ++ rmsg->u.port_info_get_reply.format.encoding_variant; ++ port->format.bitrate = rmsg->u.port_info_get_reply.format.bitrate; ++ port->format.flags = rmsg->u.port_info_get_reply.format.flags; ++ ++ /* elementry stream format */ ++ memcpy(&port->es, ++ &rmsg->u.port_info_get_reply.es, ++ sizeof(union mmal_es_specific_format)); ++ port->format.es = &port->es; ++ ++ port->format.extradata_size = ++ rmsg->u.port_info_get_reply.format.extradata_size; ++ memcpy(port->format.extradata, ++ rmsg->u.port_info_get_reply.extradata, ++ port->format.extradata_size); ++ ++ pr_debug("received port info\n"); ++ dump_port_info(port); ++ ++release_msg: ++ ++ pr_debug("%s:result:%d component:0x%x port:%d\n", ++ __func__, ret, port->component->handle, port->handle); ++ ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* create comonent on vc */ ++static int create_component(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component, ++ const char *name) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ /* build component create message */ ++ m.h.type = MMAL_MSG_TYPE_COMPONENT_CREATE; ++ m.u.component_create.client_component = component; ++ strncpy(m.u.component_create.name, name, ++ sizeof(m.u.component_create.name)); ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.component_create), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != m.h.type) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.component_create_reply.status; ++ if (ret != MMAL_MSG_STATUS_SUCCESS) ++ goto release_msg; ++ ++ /* a valid component response received */ ++ component->handle = rmsg->u.component_create_reply.component_handle; ++ component->inputs = rmsg->u.component_create_reply.input_num; ++ component->outputs = rmsg->u.component_create_reply.output_num; ++ component->clocks = rmsg->u.component_create_reply.clock_num; ++ ++ pr_debug("Component handle:0x%x in:%d out:%d clock:%d\n", ++ component->handle, ++ component->inputs, component->outputs, component->clocks); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* destroys a component on vc */ ++static int destroy_component(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_COMPONENT_DESTROY; ++ m.u.component_destroy.component_handle = component->handle; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.component_destroy), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != m.h.type) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.component_destroy_reply.status; ++ ++release_msg: ++ ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* enable a component on vc */ ++static int enable_component(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_COMPONENT_ENABLE; ++ m.u.component_enable.component_handle = component->handle; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.component_enable), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != m.h.type) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.component_enable_reply.status; ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* disable a component on vc */ ++static int disable_component(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_COMPONENT_DISABLE; ++ m.u.component_disable.component_handle = component->handle; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.component_disable), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != m.h.type) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.component_disable_reply.status; ++ ++release_msg: ++ ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* get version of mmal implementation */ ++static int get_version(struct vchiq_mmal_instance *instance, ++ u32 *major_out, u32 *minor_out) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_GET_VERSION; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.version), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != m.h.type) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ *major_out = rmsg->u.version.major; ++ *minor_out = rmsg->u.version.minor; ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* do a port action with a port as a parameter */ ++static int port_action_port(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ enum mmal_msg_port_action_type action_type) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_PORT_ACTION; ++ m.u.port_action_port.component_handle = port->component->handle; ++ m.u.port_action_port.port_handle = port->handle; ++ m.u.port_action_port.action = action_type; ++ ++ port_to_mmal_msg(port, &m.u.port_action_port.port); ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.port_action_port), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_ACTION) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.port_action_reply.status; ++ ++ pr_debug("%s:result:%d component:0x%x port:%d action:%s(%d)\n", ++ __func__, ++ ret, port->component->handle, port->handle, ++ port_action_type_names[action_type], action_type); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* do a port action with handles as parameters */ ++static int port_action_handle(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ enum mmal_msg_port_action_type action_type, ++ u32 connect_component_handle, ++ u32 connect_port_handle) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_PORT_ACTION; ++ ++ m.u.port_action_handle.component_handle = port->component->handle; ++ m.u.port_action_handle.port_handle = port->handle; ++ m.u.port_action_handle.action = action_type; ++ ++ m.u.port_action_handle.connect_component_handle = ++ connect_component_handle; ++ m.u.port_action_handle.connect_port_handle = connect_port_handle; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(m.u.port_action_handle), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_ACTION) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.port_action_reply.status; ++ ++ pr_debug("%s:result:%d component:0x%x port:%d action:%s(%d)" \ ++ " connect component:0x%x connect port:%d\n", ++ __func__, ++ ret, port->component->handle, port->handle, ++ port_action_type_names[action_type], ++ action_type, connect_component_handle, connect_port_handle); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++static int port_parameter_set(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter_id, void *value, u32 value_size) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_PORT_PARAMETER_SET; ++ ++ m.u.port_parameter_set.component_handle = port->component->handle; ++ m.u.port_parameter_set.port_handle = port->handle; ++ m.u.port_parameter_set.id = parameter_id; ++ m.u.port_parameter_set.size = (2 * sizeof(u32)) + value_size; ++ memcpy(&m.u.port_parameter_set.value, value, value_size); ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ (4 * sizeof(u32)) + value_size, ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_PARAMETER_SET) { ++ /* got an unexpected message type in reply */ ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.port_parameter_set_reply.status; ++ ++ pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", ++ __func__, ++ ret, port->component->handle, port->handle, parameter_id); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++static int port_parameter_get(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter_id, void *value, u32 *value_size) ++{ ++ int ret; ++ struct mmal_msg m; ++ struct mmal_msg *rmsg; ++ VCHI_HELD_MSG_T rmsg_handle; ++ ++ m.h.type = MMAL_MSG_TYPE_PORT_PARAMETER_GET; ++ ++ m.u.port_parameter_get.component_handle = port->component->handle; ++ m.u.port_parameter_get.port_handle = port->handle; ++ m.u.port_parameter_get.id = parameter_id; ++ m.u.port_parameter_get.size = (2 * sizeof(u32)) + *value_size; ++ ++ ret = send_synchronous_mmal_msg(instance, &m, ++ sizeof(struct ++ mmal_msg_port_parameter_get), ++ &rmsg, &rmsg_handle); ++ if (ret) ++ return ret; ++ ++ if (rmsg->h.type != MMAL_MSG_TYPE_PORT_PARAMETER_GET) { ++ /* got an unexpected message type in reply */ ++ pr_err("Incorrect reply type %d\n", rmsg->h.type); ++ ret = -EINVAL; ++ goto release_msg; ++ } ++ ++ ret = -rmsg->u.port_parameter_get_reply.status; ++ if (ret) { ++ /* Copy only as much as we have space for ++ * but report true size of parameter ++ */ ++ memcpy(value, &rmsg->u.port_parameter_get_reply.value, ++ *value_size); ++ *value_size = rmsg->u.port_parameter_get_reply.size; ++ } else ++ memcpy(value, &rmsg->u.port_parameter_get_reply.value, ++ rmsg->u.port_parameter_get_reply.size); ++ ++ pr_debug("%s:result:%d component:0x%x port:%d parameter:%d\n", __func__, ++ ret, port->component->handle, port->handle, parameter_id); ++ ++release_msg: ++ vchi_held_msg_release(&rmsg_handle); ++ ++ return ret; ++} ++ ++/* disables a port and drains buffers from it */ ++static int port_disable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ struct list_head *q, *buf_head; ++ unsigned long flags = 0; ++ ++ if (!port->enabled) ++ return 0; ++ ++ port->enabled = false; ++ ++ ret = port_action_port(instance, port, ++ MMAL_MSG_PORT_ACTION_TYPE_DISABLE); ++ if (ret == 0) { ++ ++ /* drain all queued buffers on port */ ++ spin_lock_irqsave(&port->slock, flags); ++ ++ list_for_each_safe(buf_head, q, &port->buffers) { ++ struct mmal_buffer *mmalbuf; ++ mmalbuf = list_entry(buf_head, struct mmal_buffer, ++ list); ++ list_del(buf_head); ++ if (port->buffer_cb) ++ port->buffer_cb(instance, ++ port, 0, mmalbuf, 0, 0, ++ MMAL_TIME_UNKNOWN, ++ MMAL_TIME_UNKNOWN); ++ } ++ ++ spin_unlock_irqrestore(&port->slock, flags); ++ ++ ret = port_info_get(instance, port); ++ } ++ ++ return ret; ++} ++ ++/* enable a port */ ++static int port_enable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ unsigned int hdr_count; ++ struct list_head *buf_head; ++ int ret; ++ ++ if (port->enabled) ++ return 0; ++ ++ /* ensure there are enough buffers queued to cover the buffer headers */ ++ if (port->buffer_cb != NULL) { ++ hdr_count = 0; ++ list_for_each(buf_head, &port->buffers) { ++ hdr_count++; ++ } ++ if (hdr_count < port->current_buffer.num) ++ return -ENOSPC; ++ } ++ ++ ret = port_action_port(instance, port, ++ MMAL_MSG_PORT_ACTION_TYPE_ENABLE); ++ if (ret) ++ goto done; ++ ++ port->enabled = true; ++ ++ if (port->buffer_cb) { ++ /* send buffer headers to videocore */ ++ hdr_count = 1; ++ list_for_each(buf_head, &port->buffers) { ++ struct mmal_buffer *mmalbuf; ++ mmalbuf = list_entry(buf_head, struct mmal_buffer, ++ list); ++ ret = buffer_from_host(instance, port, mmalbuf); ++ if (ret) ++ goto done; ++ ++ hdr_count++; ++ if (hdr_count > port->current_buffer.num) ++ break; ++ } ++ } ++ ++ ret = port_info_get(instance, port); ++ ++done: ++ return ret; ++} ++ ++/* ------------------------------------------------------------------ ++ * Exported API ++ *------------------------------------------------------------------*/ ++ ++int vchiq_mmal_port_set_format(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ ret = port_info_set(instance, port); ++ if (ret) ++ goto release_unlock; ++ ++ /* read what has actually been set */ ++ ret = port_info_get(instance, port); ++ ++release_unlock: ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++ ++} ++ ++int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter, void *value, u32 value_size) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ ret = port_parameter_set(instance, port, parameter, value, value_size); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++int vchiq_mmal_port_parameter_get(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter, void *value, u32 *value_size) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ ret = port_parameter_get(instance, port, parameter, value, value_size); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++/* enable a port ++ * ++ * enables a port and queues buffers for satisfying callbacks if we ++ * provide a callback handler ++ */ ++int vchiq_mmal_port_enable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ vchiq_mmal_buffer_cb buffer_cb) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ /* already enabled - noop */ ++ if (port->enabled) { ++ ret = 0; ++ goto unlock; ++ } ++ ++ port->buffer_cb = buffer_cb; ++ ++ ret = port_enable(instance, port); ++ ++unlock: ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ if (!port->enabled) { ++ mutex_unlock(&instance->vchiq_mutex); ++ return 0; ++ } ++ ++ ret = port_disable(instance, port); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++/* ports will be connected in a tunneled manner so data buffers ++ * are not handled by client. ++ */ ++int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *src, ++ struct vchiq_mmal_port *dst) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ /* disconnect ports if connected */ ++ if (src->connected != NULL) { ++ ret = port_disable(instance, src); ++ if (ret) { ++ pr_err("failed disabling src port(%d)\n", ret); ++ goto release_unlock; ++ } ++ ++ /* do not need to disable the destination port as they ++ * are connected and it is done automatically ++ */ ++ ++ ret = port_action_handle(instance, src, ++ MMAL_MSG_PORT_ACTION_TYPE_DISCONNECT, ++ src->connected->component->handle, ++ src->connected->handle); ++ if (ret < 0) { ++ pr_err("failed disconnecting src port\n"); ++ goto release_unlock; ++ } ++ src->connected->enabled = false; ++ src->connected = NULL; ++ } ++ ++ if (dst == NULL) { ++ /* do not make new connection */ ++ ret = 0; ++ pr_debug("not making new connection\n"); ++ goto release_unlock; ++ } ++ ++ /* copy src port format to dst */ ++ dst->format.encoding = src->format.encoding; ++ dst->es.video.width = src->es.video.width; ++ dst->es.video.height = src->es.video.height; ++ dst->es.video.crop.x = src->es.video.crop.x; ++ dst->es.video.crop.y = src->es.video.crop.y; ++ dst->es.video.crop.width = src->es.video.crop.width; ++ dst->es.video.crop.height = src->es.video.crop.height; ++ dst->es.video.frame_rate.num = src->es.video.frame_rate.num; ++ dst->es.video.frame_rate.den = src->es.video.frame_rate.den; ++ ++ /* set new format */ ++ ret = port_info_set(instance, dst); ++ if (ret) { ++ pr_debug("setting port info failed\n"); ++ goto release_unlock; ++ } ++ ++ /* read what has actually been set */ ++ ret = port_info_get(instance, dst); ++ if (ret) { ++ pr_debug("read back port info failed\n"); ++ goto release_unlock; ++ } ++ ++ /* connect two ports together */ ++ ret = port_action_handle(instance, src, ++ MMAL_MSG_PORT_ACTION_TYPE_CONNECT, ++ dst->component->handle, dst->handle); ++ if (ret < 0) { ++ pr_debug("connecting port %d:%d to %d:%d failed\n", ++ src->component->handle, src->handle, ++ dst->component->handle, dst->handle); ++ goto release_unlock; ++ } ++ src->connected = dst; ++ ++release_unlock: ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++int vchiq_mmal_submit_buffer(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ struct mmal_buffer *buffer) ++{ ++ unsigned long flags = 0; ++ ++ spin_lock_irqsave(&port->slock, flags); ++ list_add_tail(&buffer->list, &port->buffers); ++ spin_unlock_irqrestore(&port->slock, flags); ++ ++ /* the port previously underflowed because it was missing a ++ * mmal_buffer which has just been added, submit that buffer ++ * to the mmal service. ++ */ ++ if (port->buffer_underflow) { ++ port_buffer_from_host(instance, port); ++ port->buffer_underflow--; ++ } ++ ++ return 0; ++} ++ ++/* Initialise a mmal component and its ports ++ * ++ */ ++int vchiq_mmal_component_init(struct vchiq_mmal_instance *instance, ++ const char *name, ++ struct vchiq_mmal_component **component_out) ++{ ++ int ret; ++ int idx; /* port index */ ++ struct vchiq_mmal_component *component; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ if (instance->component_idx == VCHIQ_MMAL_MAX_COMPONENTS) { ++ ret = -EINVAL; /* todo is this correct error? */ ++ goto unlock; ++ } ++ ++ component = &instance->component[instance->component_idx]; ++ ++ ret = create_component(instance, component, name); ++ if (ret < 0) ++ goto unlock; ++ ++ /* ports info needs gathering */ ++ component->control.type = MMAL_PORT_TYPE_CONTROL; ++ component->control.index = 0; ++ component->control.component = component; ++ spin_lock_init(&component->control.slock); ++ INIT_LIST_HEAD(&component->control.buffers); ++ ret = port_info_get(instance, &component->control); ++ if (ret < 0) ++ goto release_component; ++ ++ for (idx = 0; idx < component->inputs; idx++) { ++ component->input[idx].type = MMAL_PORT_TYPE_INPUT; ++ component->input[idx].index = idx; ++ component->input[idx].component = component; ++ spin_lock_init(&component->input[idx].slock); ++ INIT_LIST_HEAD(&component->input[idx].buffers); ++ ret = port_info_get(instance, &component->input[idx]); ++ if (ret < 0) ++ goto release_component; ++ } ++ ++ for (idx = 0; idx < component->outputs; idx++) { ++ component->output[idx].type = MMAL_PORT_TYPE_OUTPUT; ++ component->output[idx].index = idx; ++ component->output[idx].component = component; ++ spin_lock_init(&component->output[idx].slock); ++ INIT_LIST_HEAD(&component->output[idx].buffers); ++ ret = port_info_get(instance, &component->output[idx]); ++ if (ret < 0) ++ goto release_component; ++ } ++ ++ for (idx = 0; idx < component->clocks; idx++) { ++ component->clock[idx].type = MMAL_PORT_TYPE_CLOCK; ++ component->clock[idx].index = idx; ++ component->clock[idx].component = component; ++ spin_lock_init(&component->clock[idx].slock); ++ INIT_LIST_HEAD(&component->clock[idx].buffers); ++ ret = port_info_get(instance, &component->clock[idx]); ++ if (ret < 0) ++ goto release_component; ++ } ++ ++ instance->component_idx++; ++ ++ *component_out = component; ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return 0; ++ ++release_component: ++ destroy_component(instance, component); ++unlock: ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++/* ++ * cause a mmal component to be destroyed ++ */ ++int vchiq_mmal_component_finalise(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ if (component->enabled) ++ ret = disable_component(instance, component); ++ ++ ret = destroy_component(instance, component); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++/* ++ * cause a mmal component to be enabled ++ */ ++int vchiq_mmal_component_enable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ if (component->enabled) { ++ mutex_unlock(&instance->vchiq_mutex); ++ return 0; ++ } ++ ++ ret = enable_component(instance, component); ++ if (ret == 0) ++ component->enabled = true; ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++/* ++ * cause a mmal component to be enabled ++ */ ++int vchiq_mmal_component_disable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ if (!component->enabled) { ++ mutex_unlock(&instance->vchiq_mutex); ++ return 0; ++ } ++ ++ ret = disable_component(instance, component); ++ if (ret == 0) ++ component->enabled = false; ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++int vchiq_mmal_version(struct vchiq_mmal_instance *instance, ++ u32 *major_out, u32 *minor_out) ++{ ++ int ret; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ ret = get_version(instance, major_out, minor_out); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ return ret; ++} ++ ++int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance) ++{ ++ int status = 0; ++ ++ if (instance == NULL) ++ return -EINVAL; ++ ++ if (mutex_lock_interruptible(&instance->vchiq_mutex)) ++ return -EINTR; ++ ++ vchi_service_use(instance->handle); ++ ++ status = vchi_service_close(instance->handle); ++ if (status != 0) ++ pr_err("mmal-vchiq: VCHIQ close failed"); ++ ++ mutex_unlock(&instance->vchiq_mutex); ++ ++ vfree(instance->bulk_scratch); ++ ++ kfree(instance); ++ ++ return status; ++} ++ ++int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance) ++{ ++ int status; ++ struct vchiq_mmal_instance *instance; ++ static VCHI_CONNECTION_T *vchi_connection; ++ static VCHI_INSTANCE_T vchi_instance; ++ SERVICE_CREATION_T params = { ++ VCHI_VERSION_EX(VC_MMAL_VER, VC_MMAL_MIN_VER), ++ VC_MMAL_SERVER_NAME, ++ vchi_connection, ++ 0, /* rx fifo size (unused) */ ++ 0, /* tx fifo size (unused) */ ++ service_callback, ++ NULL, /* service callback parameter */ ++ 1, /* unaligned bulk receives */ ++ 1, /* unaligned bulk transmits */ ++ 0 /* want crc check on bulk transfers */ ++ }; ++ ++ /* compile time checks to ensure structure size as they are ++ * directly (de)serialised from memory. ++ */ ++ ++ /* ensure the header structure has packed to the correct size */ ++ BUILD_BUG_ON(sizeof(struct mmal_msg_header) != 24); ++ ++ /* ensure message structure does not exceed maximum length */ ++ BUILD_BUG_ON(sizeof(struct mmal_msg) > MMAL_MSG_MAX_SIZE); ++ ++ /* mmal port struct is correct size */ ++ BUILD_BUG_ON(sizeof(struct mmal_port) != 64); ++ ++ /* create a vchi instance */ ++ status = vchi_initialise(&vchi_instance); ++ if (status) { ++ pr_err("Failed to initialise VCHI instance (status=%d)\n", ++ status); ++ return -EIO; ++ } ++ ++ status = vchi_connect(NULL, 0, vchi_instance); ++ if (status) { ++ pr_err("Failed to connect VCHI instance (status=%d)\n", status); ++ return -EIO; ++ } ++ ++ instance = kmalloc(sizeof(*instance), GFP_KERNEL); ++ memset(instance, 0, sizeof(*instance)); ++ ++ mutex_init(&instance->vchiq_mutex); ++ mutex_init(&instance->bulk_mutex); ++ ++ instance->bulk_scratch = vmalloc(PAGE_SIZE); ++ ++ params.callback_param = instance; ++ ++ status = vchi_service_open(vchi_instance, ¶ms, &instance->handle); ++ if (status) { ++ pr_err("Failed to open VCHI service connection (status=%d)\n", ++ status); ++ goto err_close_services; ++ } ++ ++ vchi_service_release(instance->handle); ++ ++ *out_instance = instance; ++ ++ return 0; ++ ++err_close_services: ++ ++ vchi_service_close(instance->handle); ++ vfree(instance->bulk_scratch); ++ kfree(instance); ++ return -ENODEV; ++} +--- /dev/null ++++ b/drivers/media/platform/bcm2835/mmal-vchiq.h +@@ -0,0 +1,178 @@ ++/* ++ * Broadcom BM2835 V4L2 driver ++ * ++ * Copyright © 2013 Raspberry Pi (Trading) Ltd. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive ++ * for more details. ++ * ++ * Authors: Vincent Sanders ++ * Dave Stevenson ++ * Simon Mellor ++ * Luke Diamand ++ * ++ * MMAL interface to VCHIQ message passing ++ */ ++ ++#ifndef MMAL_VCHIQ_H ++#define MMAL_VCHIQ_H ++ ++#include "mmal-msg-format.h" ++ ++#define MAX_PORT_COUNT 4 ++ ++/* Maximum size of the format extradata. */ ++#define MMAL_FORMAT_EXTRADATA_MAX_SIZE 128 ++ ++struct vchiq_mmal_instance; ++ ++enum vchiq_mmal_es_type { ++ MMAL_ES_TYPE_UNKNOWN, /**< Unknown elementary stream type */ ++ MMAL_ES_TYPE_CONTROL, /**< Elementary stream of control commands */ ++ MMAL_ES_TYPE_AUDIO, /**< Audio elementary stream */ ++ MMAL_ES_TYPE_VIDEO, /**< Video elementary stream */ ++ MMAL_ES_TYPE_SUBPICTURE /**< Sub-picture elementary stream */ ++}; ++ ++/* rectangle, used lots so it gets its own struct */ ++struct vchiq_mmal_rect { ++ s32 x; ++ s32 y; ++ s32 width; ++ s32 height; ++}; ++ ++struct vchiq_mmal_port_buffer { ++ unsigned int num; /* number of buffers */ ++ u32 size; /* size of buffers */ ++ u32 alignment; /* alignment of buffers */ ++}; ++ ++struct vchiq_mmal_port; ++ ++typedef void (*vchiq_mmal_buffer_cb)( ++ struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ int status, struct mmal_buffer *buffer, ++ unsigned long length, u32 mmal_flags, s64 dts, s64 pts); ++ ++struct vchiq_mmal_port { ++ bool enabled; ++ u32 handle; ++ u32 type; /* port type, cached to use on port info set */ ++ u32 index; /* port index, cached to use on port info set */ ++ ++ /* component port belongs to, allows simple deref */ ++ struct vchiq_mmal_component *component; ++ ++ struct vchiq_mmal_port *connected; /* port conencted to */ ++ ++ /* buffer info */ ++ struct vchiq_mmal_port_buffer minimum_buffer; ++ struct vchiq_mmal_port_buffer recommended_buffer; ++ struct vchiq_mmal_port_buffer current_buffer; ++ ++ /* stream format */ ++ struct mmal_es_format format; ++ /* elementry stream format */ ++ union mmal_es_specific_format es; ++ ++ /* data buffers to fill */ ++ struct list_head buffers; ++ /* lock to serialise adding and removing buffers from list */ ++ spinlock_t slock; ++ /* count of how many buffer header refils have failed because ++ * there was no buffer to satisfy them ++ */ ++ int buffer_underflow; ++ /* callback on buffer completion */ ++ vchiq_mmal_buffer_cb buffer_cb; ++ /* callback context */ ++ void *cb_ctx; ++}; ++ ++struct vchiq_mmal_component { ++ bool enabled; ++ u32 handle; /* VideoCore handle for component */ ++ u32 inputs; /* Number of input ports */ ++ u32 outputs; /* Number of output ports */ ++ u32 clocks; /* Number of clock ports */ ++ struct vchiq_mmal_port control; /* control port */ ++ struct vchiq_mmal_port input[MAX_PORT_COUNT]; /* input ports */ ++ struct vchiq_mmal_port output[MAX_PORT_COUNT]; /* output ports */ ++ struct vchiq_mmal_port clock[MAX_PORT_COUNT]; /* clock ports */ ++}; ++ ++ ++int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance); ++int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance); ++ ++/* Initialise a mmal component and its ports ++* ++*/ ++int vchiq_mmal_component_init( ++ struct vchiq_mmal_instance *instance, ++ const char *name, ++ struct vchiq_mmal_component **component_out); ++ ++int vchiq_mmal_component_finalise( ++ struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component); ++ ++int vchiq_mmal_component_enable( ++ struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component); ++ ++int vchiq_mmal_component_disable( ++ struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_component *component); ++ ++ ++ ++/* enable a mmal port ++ * ++ * enables a port and if a buffer callback provided enque buffer ++ * headers as apropriate for the port. ++ */ ++int vchiq_mmal_port_enable( ++ struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ vchiq_mmal_buffer_cb buffer_cb); ++ ++/* disable a port ++ * ++ * disable a port will dequeue any pending buffers ++ */ ++int vchiq_mmal_port_disable(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port); ++ ++ ++int vchiq_mmal_port_parameter_set(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter, ++ void *value, ++ u32 value_size); ++ ++int vchiq_mmal_port_parameter_get(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ u32 parameter, ++ void *value, ++ u32 *value_size); ++ ++int vchiq_mmal_port_set_format(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port); ++ ++int vchiq_mmal_port_connect_tunnel(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *src, ++ struct vchiq_mmal_port *dst); ++ ++int vchiq_mmal_version(struct vchiq_mmal_instance *instance, ++ u32 *major_out, ++ u32 *minor_out); ++ ++int vchiq_mmal_submit_buffer(struct vchiq_mmal_instance *instance, ++ struct vchiq_mmal_port *port, ++ struct mmal_buffer *buf); ++ ++#endif /* MMAL_VCHIQ_H */ diff --git a/target/linux/brcm2708/patches-4.9/950-0052-scripts-Add-mkknlimg-and-knlinfo-scripts-from-tools-.patch b/target/linux/brcm2708/patches-4.9/950-0052-scripts-Add-mkknlimg-and-knlinfo-scripts-from-tools-.patch new file mode 100644 index 000000000000..7ae4edd5c29d --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0052-scripts-Add-mkknlimg-and-knlinfo-scripts-from-tools-.patch @@ -0,0 +1,515 @@ +From c1275c733d61290f7477eb7bbaea96d04206eff3 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 11 May 2015 09:00:42 +0100 +Subject: [PATCH] scripts: Add mkknlimg and knlinfo scripts from tools repo + +The Raspberry Pi firmware looks for a trailer on the kernel image to +determine whether it was compiled with Device Tree support enabled. +If the firmware finds a kernel without this trailer, or which has a +trailer indicating that it isn't DT-capable, it disables DT support +and reverts to using ATAGs. + +The mkknlimg utility adds that trailer, having first analysed the +image to look for signs of DT support and the kernel version string. + +knlinfo displays the contents of the trailer in the given kernel image. + +scripts/mkknlimg: Add support for ARCH_BCM2835 + +Add a new trailer field indicating whether this is an ARCH_BCM2835 +build, as opposed to MACH_BCM2708/9. If the loader finds this flag +is set it changes the default base dtb file name from bcm270x... +to bcm283y... + +Also update knlinfo to show the status of the field. + +scripts/mkknlimg: Improve ARCH_BCM2835 detection + +The board support code contains sufficient strings to be able to +distinguish 2708 vs. 2835 builds, so remove the check for +bcm2835-pm-wdt which could exist in either. + +Also, since the canned configuration is no longer built in (it's +a module), remove the config string checking. + +See: https://github.com/raspberrypi/linux/issues/1157 + +scripts: Multi-platform support for mkknlimg and knlinfo + +The firmware uses tags in the kernel trailer to choose which dtb file +to load. Current firmware loads bcm2835-*.dtb if the '283x' tag is true, +otherwise it loads bcm270*.dtb. This scheme breaks if an image supports +multiple platforms. + +This patch adds '270X' and '283X' tags to indicate support for RPi and +upstream platforms, respectively. '283x' (note lower case 'x') is left +for old firmware, and is only set if the image only supports upstream +builds. + +scripts/mkknlimg: Append a trailer for all input + +Now that the firmware assumes an unsigned kernel is DT-capable, it is +helpful to be able to mark a kernel as being non-DT-capable. + +Signed-off-by: Phil Elwell + +scripts/knlinfo: Decode DDTK atom + +Show the DDTK atom as being a boolean. + +Signed-off-by: Phil Elwell + +mkknlimg: Retain downstream-kernel detection + +With the death of ARCH_BCM2708 and ARCH_BCM2709, a new way is needed to +determine if this is a "downstream" build that wants the firmware to +load a bcm27xx .dtb. The vc_cma driver is used downstream but not +upstream, making vc_cma_init a suitable predicate symbol. +--- + scripts/knlinfo | 171 +++++++++++++++++++++++++++++++++++ + scripts/mkknlimg | 264 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 435 insertions(+) + create mode 100755 scripts/knlinfo + create mode 100755 scripts/mkknlimg + +--- /dev/null ++++ b/scripts/knlinfo +@@ -0,0 +1,171 @@ ++#!/usr/bin/env perl ++# ---------------------------------------------------------------------- ++# knlinfo by Phil Elwell for Raspberry Pi ++# ++# (c) 2014,2015 Raspberry Pi (Trading) Limited ++# ++# Licensed under the terms of the GNU General Public License. ++# ---------------------------------------------------------------------- ++ ++use strict; ++use integer; ++ ++use Fcntl ":seek"; ++ ++my $trailer_magic = 'RPTL'; ++ ++my %atom_formats = ++( ++ 'DDTK' => \&format_bool, ++ 'DTOK' => \&format_bool, ++ 'KVer' => \&format_string, ++ '270X' => \&format_bool, ++ '283X' => \&format_bool, ++ '283x' => \&format_bool, ++); ++ ++if (@ARGV != 1) ++{ ++ print ("Usage: knlinfo \n"); ++ exit(1); ++} ++ ++my $kernel_file = $ARGV[0]; ++ ++ ++my ($atoms, $pos) = read_trailer($kernel_file); ++ ++exit(1) if (!$atoms); ++ ++printf("Kernel trailer found at %d/0x%x:\n", $pos, $pos); ++ ++foreach my $atom (@$atoms) ++{ ++ printf(" %s: %s\n", $atom->[0], format_atom($atom)); ++} ++ ++exit(0); ++ ++sub read_trailer ++{ ++ my ($kernel_file) = @_; ++ my $fh; ++ ++ if (!open($fh, '<', $kernel_file)) ++ { ++ print ("* Failed to open '$kernel_file'\n"); ++ return undef; ++ } ++ ++ if (!seek($fh, -12, SEEK_END)) ++ { ++ print ("* seek error in '$kernel_file'\n"); ++ return undef; ++ } ++ ++ my $last_bytes; ++ sysread($fh, $last_bytes, 12); ++ ++ my ($trailer_len, $data_len, $magic) = unpack('VVa4', $last_bytes); ++ ++ if (($magic ne $trailer_magic) || ($data_len != 4)) ++ { ++ print ("* no trailer\n"); ++ return undef; ++ } ++ if (!seek($fh, -12, SEEK_END)) ++ { ++ print ("* seek error in '$kernel_file'\n"); ++ return undef; ++ } ++ ++ $trailer_len -= 12; ++ ++ while ($trailer_len > 0) ++ { ++ if ($trailer_len < 8) ++ { ++ print ("* truncated atom header in trailer\n"); ++ return undef; ++ } ++ if (!seek($fh, -8, SEEK_CUR)) ++ { ++ print ("* seek error in '$kernel_file'\n"); ++ return undef; ++ } ++ $trailer_len -= 8; ++ ++ my $atom_hdr; ++ sysread($fh, $atom_hdr, 8); ++ my ($atom_len, $atom_type) = unpack('Va4', $atom_hdr); ++ ++ if ($trailer_len < $atom_len) ++ { ++ print ("* truncated atom data in trailer\n"); ++ return undef; ++ } ++ ++ my $rounded_len = (($atom_len + 3) & ~3); ++ if (!seek($fh, -(8 + $rounded_len), SEEK_CUR)) ++ { ++ print ("* seek error in '$kernel_file'\n"); ++ return undef; ++ } ++ $trailer_len -= $rounded_len; ++ ++ my $atom_data; ++ sysread($fh, $atom_data, $atom_len); ++ ++ if (!seek($fh, -$atom_len, SEEK_CUR)) ++ { ++ print ("* seek error in '$kernel_file'\n"); ++ return undef; ++ } ++ ++ push @$atoms, [ $atom_type, $atom_data ]; ++ } ++ ++ if (($$atoms[-1][0] eq "\x00\x00\x00\x00") && ++ ($$atoms[-1][1] eq "")) ++ { ++ pop @$atoms; ++ } ++ else ++ { ++ print ("* end marker missing from trailer\n"); ++ } ++ ++ return ($atoms, tell($fh)); ++} ++ ++sub format_atom ++{ ++ my ($atom) = @_; ++ ++ my $format_func = $atom_formats{$atom->[0]} || \&format_hex; ++ return $format_func->($atom->[1]); ++} ++ ++sub format_bool ++{ ++ my ($data) = @_; ++ return unpack('V', $data) ? 'y' : 'n'; ++} ++ ++sub format_int ++{ ++ my ($data) = @_; ++ return unpack('V', $data); ++} ++ ++sub format_string ++{ ++ my ($data) = @_; ++ return '"'.$data.'"'; ++} ++ ++sub format_hex ++{ ++ my ($data) = @_; ++ return unpack('H*', $data); ++} +--- /dev/null ++++ b/scripts/mkknlimg +@@ -0,0 +1,264 @@ ++#!/usr/bin/env perl ++# ---------------------------------------------------------------------- ++# mkknlimg by Phil Elwell for Raspberry Pi ++# based on extract-ikconfig by Dick Streefland ++# ++# (c) 2009,2010 Dick Streefland ++# (c) 2014,2015 Raspberry Pi (Trading) Limited ++# ++# Licensed under the terms of the GNU General Public License. ++# ---------------------------------------------------------------------- ++ ++use strict; ++use warnings; ++use integer; ++ ++use constant FLAG_PI => 0x01; ++use constant FLAG_DTOK => 0x02; ++use constant FLAG_DDTK => 0x04; ++use constant FLAG_270X => 0x08; ++use constant FLAG_283X => 0x10; ++ ++my $trailer_magic = 'RPTL'; ++ ++my $tmpfile1 = "/tmp/mkknlimg_$$.1"; ++my $tmpfile2 = "/tmp/mkknlimg_$$.2"; ++ ++my $dtok = 0; ++my $ddtk = 0; ++my $is_270x = 0; ++my $is_283x = 0; ++ ++while (@ARGV && ($ARGV[0] =~ /^-/)) ++{ ++ my $arg = shift(@ARGV); ++ if ($arg eq '--dtok') ++ { ++ $dtok = 1; ++ } ++ elsif ($arg eq '--ddtk') ++ { ++ $ddtk = 1; ++ } ++ elsif ($arg eq '--270x') ++ { ++ $is_270x = 1; ++ } ++ elsif ($arg eq '--283x') ++ { ++ $is_283x = 1; ++ } ++ else ++ { ++ print ("* Unknown option '$arg'\n"); ++ usage(); ++ } ++} ++ ++usage() if (@ARGV != 2); ++ ++my $kernel_file = $ARGV[0]; ++my $out_file = $ARGV[1]; ++ ++if (! -r $kernel_file) ++{ ++ print ("* File '$kernel_file' not found\n"); ++ usage(); ++} ++ ++my $wanted_strings = ++{ ++ 'bcm2708_fb' => FLAG_PI, ++ 'brcm,bcm2835-mmc' => FLAG_PI, ++ 'brcm,bcm2835-sdhost' => FLAG_PI, ++ 'brcm,bcm2708-pinctrl' => FLAG_PI | FLAG_DTOK, ++ 'brcm,bcm2835-gpio' => FLAG_PI | FLAG_DTOK, ++ 'brcm,bcm2708' => FLAG_PI | FLAG_DTOK | FLAG_270X, ++ 'brcm,bcm2709' => FLAG_PI | FLAG_DTOK | FLAG_270X, ++ 'brcm,bcm2835' => FLAG_PI | FLAG_DTOK | FLAG_283X, ++ 'brcm,bcm2836' => FLAG_PI | FLAG_DTOK | FLAG_283X, ++ 'of_cfs_init' => FLAG_DTOK | FLAG_DDTK, ++ 'vc_cma_init' => FLAG_PI | FLAG_270X, ++}; ++ ++my $res = try_extract($kernel_file, $tmpfile1); ++$res ||= try_decompress('\037\213\010', 'xy', 'gunzip', 0, ++ $kernel_file, $tmpfile1, $tmpfile2); ++$res ||= try_decompress('\3757zXZ\000', 'abcde', 'unxz --single-stream', -1, ++ $kernel_file, $tmpfile1, $tmpfile2); ++$res ||= try_decompress('BZh', 'xy', 'bunzip2', 0, ++ $kernel_file, $tmpfile1, $tmpfile2); ++$res ||= try_decompress('\135\0\0\0', 'xxx', 'unlzma', 0, ++ $kernel_file, $tmpfile1, $tmpfile2); ++$res ||= try_decompress('\211\114\132', 'xy', 'lzop -d', 0, ++ $kernel_file, $tmpfile1, $tmpfile2); ++$res ||= try_decompress('\002\041\114\030', 'xy', 'lz4 -d', 1, ++ $kernel_file, $tmpfile1, $tmpfile2); ++ ++my $append_trailer; ++my $trailer; ++my $kver = '?'; ++ ++$append_trailer = 1; ++ ++if ($res) ++{ ++ $kver = $res->{'kver'} || '?'; ++ my $flags = $res->{'flags'}; ++ print("Version: $kver\n"); ++ ++ if ($flags & FLAG_PI) ++ { ++ $dtok ||= ($flags & FLAG_DTOK) != 0; ++ $is_270x ||= ($flags & FLAG_270X) != 0; ++ $is_283x ||= ($flags & FLAG_283X) != 0; ++ $ddtk ||= ($flags & FLAG_DDTK) != 0; ++ } ++ else ++ { ++ print ("* This doesn't look like a Raspberry Pi kernel.\n"); ++ } ++} ++elsif (!$dtok) ++{ ++ print ("* Is this a valid kernel?\n"); ++} ++ ++if ($append_trailer) ++{ ++ printf("DT: %s\n", $dtok ? "y" : "n"); ++ printf("DDT: %s\n", $ddtk ? "y" : "n"); ++ printf("270x: %s\n", $is_270x ? "y" : "n"); ++ printf("283x: %s\n", $is_283x ? "y" : "n"); ++ ++ my @atoms; ++ ++ push @atoms, [ $trailer_magic, pack('V', 0) ]; ++ push @atoms, [ 'KVer', $kver ]; ++ push @atoms, [ 'DTOK', pack('V', $dtok) ]; ++ push @atoms, [ 'DDTK', pack('V', $ddtk) ]; ++ push @atoms, [ '270X', pack('V', $is_270x) ]; ++ push @atoms, [ '283X', pack('V', $is_283x) ]; ++ push @atoms, [ '283x', pack('V', $is_283x && !$is_270x) ]; ++ ++ $trailer = pack_trailer(\@atoms); ++ $atoms[0]->[1] = pack('V', length($trailer)); ++ ++ $trailer = pack_trailer(\@atoms); ++} ++ ++my $ofh; ++my $total_len = 0; ++ ++if ($out_file eq $kernel_file) ++{ ++ die "* Failed to open '$out_file' for append\n" ++ if (!open($ofh, '>>', $out_file)); ++ $total_len = tell($ofh); ++} ++else ++{ ++ die "* Failed to open '$kernel_file'\n" ++ if (!open(my $ifh, '<', $kernel_file)); ++ die "* Failed to create '$out_file'\n" ++ if (!open($ofh, '>', $out_file)); ++ ++ my $copybuf; ++ while (1) ++ { ++ my $bytes = sysread($ifh, $copybuf, 64*1024); ++ last if (!$bytes); ++ syswrite($ofh, $copybuf, $bytes); ++ $total_len += $bytes; ++ } ++ close($ifh); ++} ++ ++if ($trailer) ++{ ++ # Pad to word-alignment ++ syswrite($ofh, "\x000\x000\x000", (-$total_len & 0x3)); ++ syswrite($ofh, $trailer); ++} ++ ++close($ofh); ++ ++exit($trailer ? 0 : 1); ++ ++END { ++ unlink($tmpfile1) if ($tmpfile1); ++ unlink($tmpfile2) if ($tmpfile2); ++} ++ ++ ++sub usage ++{ ++ print ("Usage: mkknlimg [--dtok] [--270x] [--283x] \n"); ++ exit(1); ++} ++ ++sub try_extract ++{ ++ my ($knl, $tmp) = @_; ++ ++ my $ver = `strings "$knl" | grep -a -E "^Linux version [1-9]"`; ++ ++ return undef if (!$ver); ++ ++ chomp($ver); ++ ++ my $res = { 'kver'=>$ver }; ++ $res->{'flags'} = strings_to_flags($knl, $wanted_strings); ++ ++ return $res; ++} ++ ++ ++sub try_decompress ++{ ++ my ($magic, $subst, $zcat, $idx, $knl, $tmp1, $tmp2) = @_; ++ ++ my $pos = `tr "$magic\n$subst" "\n$subst=" < "$knl" | grep -abo "^$subst"`; ++ if ($pos) ++ { ++ chomp($pos); ++ $pos = (split(/[\r\n]+/, $pos))[$idx]; ++ return undef if (!defined($pos)); ++ $pos =~ s/:.*[\r\n]*$//s; ++ my $cmd = "tail -c+$pos \"$knl\" | $zcat > $tmp2 2> /dev/null"; ++ my $err = (system($cmd) >> 8); ++ return undef if (($err != 0) && ($err != 2)); ++ ++ return try_extract($tmp2, $tmp1); ++ } ++ ++ return undef; ++} ++ ++sub strings_to_flags ++{ ++ my ($knl, $strings) = @_; ++ my $string_pattern = '^('.join('|', keys(%$strings)).')$'; ++ my $flags = 0; ++ ++ my @matches = `strings \"$knl\" | grep -E \"$string_pattern\"`; ++ foreach my $match (@matches) ++ { ++ chomp($match); ++ $flags |= $strings->{$match}; ++ } ++ ++ return $flags; ++} ++ ++sub pack_trailer ++{ ++ my ($atoms) = @_; ++ my $trailer = pack('VV', 0, 0); ++ for (my $i = $#$atoms; $i>=0; $i--) ++ { ++ my $atom = $atoms->[$i]; ++ $trailer .= pack('a*x!4Va4', $atom->[1], length($atom->[1]), $atom->[0]); ++ } ++ return $trailer; ++} diff --git a/target/linux/brcm2708/patches-4.9/950-0053-scripts-dtc-Update-to-upstream-version-1.4.1.patch b/target/linux/brcm2708/patches-4.9/950-0053-scripts-dtc-Update-to-upstream-version-1.4.1.patch new file mode 100644 index 000000000000..ed4b27092b4d --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0053-scripts-dtc-Update-to-upstream-version-1.4.1.patch @@ -0,0 +1,2833 @@ +From 61ad4b70c72fd7d1d3930b50e180d9727eeae150 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 10 Aug 2015 09:49:15 +0100 +Subject: [PATCH] scripts/dtc: Update to upstream version 1.4.1 + +Includes the new localfixups format. + +Signed-off-by: Phil Elwell + +scripts/dtc: Fix UMR causing corrupt dtbo overlay files + +struct fixup_entry is allocated from the heap but it's member +local_fixup_generated was never initialized. This lead to +corrupted dtbo files. + +Fix this by initializing local_fixup_generated to false. + +Signed-off-by: Matthias Reichl + +scripts/dtc: Only emit local fixups for overlays + +Signed-off-by: Phil Elwell +--- + scripts/dtc/checks.c | 106 +++++- + scripts/dtc/dtc-lexer.l | 5 + + scripts/dtc/dtc-lexer.lex.c_shipped | 537 +++++++++++++------------- + scripts/dtc/dtc-parser.tab.c_shipped | 714 ++++++++++++++++++----------------- + scripts/dtc/dtc-parser.tab.h_shipped | 46 +-- + scripts/dtc/dtc-parser.y | 22 +- + scripts/dtc/dtc.c | 9 +- + scripts/dtc/dtc.h | 40 ++ + scripts/dtc/flattree.c | 202 ++++++++++ + scripts/dtc/version_gen.h | 2 +- + 10 files changed, 1029 insertions(+), 654 deletions(-) + +--- a/scripts/dtc/checks.c ++++ b/scripts/dtc/checks.c +@@ -482,6 +482,8 @@ static void fixup_phandle_references(str + struct node *node, struct property *prop) + { + struct marker *m = prop->val.markers; ++ struct fixup *f, **fp; ++ struct fixup_entry *fe, **fep; + struct node *refnode; + cell_t phandle; + +@@ -490,11 +492,70 @@ static void fixup_phandle_references(str + + refnode = get_node_by_ref(dt, m->ref); + if (! refnode) { +- FAIL(c, "Reference to non-existent node or label \"%s\"\n", +- m->ref); ++ if (!dt->is_plugin) { ++ FAIL(c, "Reference to non-existent node or label \"%s\"\n", ++ m->ref); ++ continue; ++ } ++ ++ /* allocate fixup entry */ ++ fe = xmalloc(sizeof(*fe)); ++ ++ fe->node = node; ++ fe->prop = prop; ++ fe->offset = m->offset; ++ fe->next = NULL; ++ ++ /* search for an already existing fixup */ ++ for_each_fixup(dt, f) ++ if (strcmp(f->ref, m->ref) == 0) ++ break; ++ ++ /* no fixup found, add new */ ++ if (f == NULL) { ++ f = xmalloc(sizeof(*f)); ++ f->ref = m->ref; ++ f->entries = NULL; ++ f->next = NULL; ++ ++ /* add it to the tree */ ++ fp = &dt->fixups; ++ while (*fp) ++ fp = &(*fp)->next; ++ *fp = f; ++ } ++ ++ /* and now append fixup entry */ ++ fep = &f->entries; ++ while (*fep) ++ fep = &(*fep)->next; ++ *fep = fe; ++ ++ /* mark the entry as unresolved */ ++ *((cell_t *)(prop->val.val + m->offset)) = ++ cpu_to_fdt32(0xdeadbeef); + continue; + } + ++ /* if it's a local reference, we need to record it */ ++ if (symbol_fixup_support && dt->is_plugin) { ++ ++ /* allocate a new local fixup entry */ ++ fe = xmalloc(sizeof(*fe)); ++ ++ fe->node = node; ++ fe->prop = prop; ++ fe->offset = m->offset; ++ fe->next = NULL; ++ fe->local_fixup_generated = false; ++ ++ /* append it to the local fixups */ ++ fep = &dt->local_fixups; ++ while (*fep) ++ fep = &(*fep)->next; ++ *fep = fe; ++ } ++ + phandle = get_node_phandle(dt, refnode); + *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle); + } +@@ -676,6 +737,45 @@ static void check_obsolete_chosen_interr + } + TREE_WARNING(obsolete_chosen_interrupt_controller, NULL); + ++static void check_auto_label_phandles(struct check *c, struct node *dt, ++ struct node *node) ++{ ++ struct label *l; ++ struct symbol *s, **sp; ++ int has_label; ++ ++ if (!symbol_fixup_support) ++ return; ++ ++ has_label = 0; ++ for_each_label(node->labels, l) { ++ has_label = 1; ++ break; ++ } ++ ++ if (!has_label) ++ return; ++ ++ /* force allocation of a phandle for this node */ ++ (void)get_node_phandle(dt, node); ++ ++ /* add the symbol */ ++ for_each_label(node->labels, l) { ++ ++ s = xmalloc(sizeof(*s)); ++ s->label = l; ++ s->node = node; ++ s->next = NULL; ++ ++ /* add it to the symbols list */ ++ sp = &dt->symbols; ++ while (*sp) ++ sp = &((*sp)->next); ++ *sp = s; ++ } ++} ++NODE_WARNING(auto_label_phandles, NULL); ++ + static struct check *check_table[] = { + &duplicate_node_names, &duplicate_property_names, + &node_name_chars, &node_name_format, &property_name_chars, +@@ -696,6 +796,8 @@ static struct check *check_table[] = { + &avoid_default_addr_size, + &obsolete_chosen_interrupt_controller, + ++ &auto_label_phandles, ++ + &always_fail, + }; + +--- a/scripts/dtc/dtc-lexer.l ++++ b/scripts/dtc/dtc-lexer.l +@@ -121,6 +121,11 @@ static void lexical_error(const char *fm + return DT_V1; + } + ++<*>"/plugin/" { ++ DPRINT("Keyword: /plugin/\n"); ++ return DT_PLUGIN; ++ } ++ + <*>"/memreserve/" { + DPRINT("Keyword: /memreserve/\n"); + BEGIN_DEFAULT(); +--- a/scripts/dtc/dtc-lexer.lex.c_shipped ++++ b/scripts/dtc/dtc-lexer.lex.c_shipped +@@ -9,7 +9,7 @@ + #define FLEX_SCANNER + #define YY_FLEX_MAJOR_VERSION 2 + #define YY_FLEX_MINOR_VERSION 5 +-#define YY_FLEX_SUBMINOR_VERSION 39 ++#define YY_FLEX_SUBMINOR_VERSION 35 + #if YY_FLEX_SUBMINOR_VERSION > 0 + #define FLEX_BETA + #endif +@@ -162,12 +162,7 @@ typedef unsigned int flex_uint32_t; + typedef struct yy_buffer_state *YY_BUFFER_STATE; + #endif + +-#ifndef YY_TYPEDEF_YY_SIZE_T +-#define YY_TYPEDEF_YY_SIZE_T +-typedef size_t yy_size_t; +-#endif +- +-extern yy_size_t yyleng; ++extern int yyleng; + + extern FILE *yyin, *yyout; + +@@ -176,7 +171,6 @@ extern FILE *yyin, *yyout; + #define EOB_ACT_LAST_MATCH 2 + + #define YY_LESS_LINENO(n) +- #define YY_LINENO_REWIND_TO(ptr) + + /* Return all but the first "n" matched characters back to the input stream. */ + #define yyless(n) \ +@@ -194,6 +188,11 @@ extern FILE *yyin, *yyout; + + #define unput(c) yyunput( c, (yytext_ptr) ) + ++#ifndef YY_TYPEDEF_YY_SIZE_T ++#define YY_TYPEDEF_YY_SIZE_T ++typedef size_t yy_size_t; ++#endif ++ + #ifndef YY_STRUCT_YY_BUFFER_STATE + #define YY_STRUCT_YY_BUFFER_STATE + struct yy_buffer_state +@@ -211,7 +210,7 @@ struct yy_buffer_state + /* Number of characters read into yy_ch_buf, not including EOB + * characters. + */ +- yy_size_t yy_n_chars; ++ int yy_n_chars; + + /* Whether we "own" the buffer - i.e., we know we created it, + * and can realloc() it to grow it, and should free() it to +@@ -281,8 +280,8 @@ static YY_BUFFER_STATE * yy_buffer_stack + + /* yy_hold_char holds the character lost when yytext is formed. */ + static char yy_hold_char; +-static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ +-yy_size_t yyleng; ++static int yy_n_chars; /* number of characters read into yy_ch_buf */ ++int yyleng; + + /* Points to current character in buffer. */ + static char *yy_c_buf_p = (char *) 0; +@@ -310,7 +309,7 @@ static void yy_init_buffer (YY_BUFFER_ST + + YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); + YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); +-YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len ); ++YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len ); + + void *yyalloc (yy_size_t ); + void *yyrealloc (void *,yy_size_t ); +@@ -342,7 +341,7 @@ void yyfree (void * ); + + /* Begin user sect3 */ + +-#define yywrap() 1 ++#define yywrap(n) 1 + #define YY_SKIP_YYWRAP + + typedef unsigned char YY_CHAR; +@@ -373,8 +372,8 @@ static void yy_fatal_error (yyconst char + *yy_cp = '\0'; \ + (yy_c_buf_p) = yy_cp; + +-#define YY_NUM_RULES 30 +-#define YY_END_OF_BUFFER 31 ++#define YY_NUM_RULES 31 ++#define YY_END_OF_BUFFER 32 + /* This struct is not used in this scanner, + but its presence is necessary. */ + struct yy_trans_info +@@ -382,25 +381,26 @@ struct yy_trans_info + flex_int32_t yy_verify; + flex_int32_t yy_nxt; + }; +-static yyconst flex_int16_t yy_accept[159] = ++static yyconst flex_int16_t yy_accept[166] = + { 0, +- 0, 0, 0, 0, 0, 0, 0, 0, 31, 29, +- 18, 18, 29, 29, 29, 29, 29, 29, 29, 29, +- 29, 29, 29, 29, 29, 29, 15, 16, 16, 29, +- 16, 10, 10, 18, 26, 0, 3, 0, 27, 12, +- 0, 0, 11, 0, 0, 0, 0, 0, 0, 0, +- 21, 23, 25, 24, 22, 0, 9, 28, 0, 0, +- 0, 14, 14, 16, 16, 16, 10, 10, 10, 0, +- 12, 0, 11, 0, 0, 0, 20, 0, 0, 0, +- 0, 0, 0, 0, 0, 16, 10, 10, 10, 0, +- 13, 19, 0, 0, 0, 0, 0, 0, 0, 0, +- +- 0, 16, 0, 0, 0, 0, 0, 0, 0, 0, +- 0, 16, 6, 0, 0, 0, 0, 0, 0, 2, +- 0, 0, 0, 0, 0, 0, 0, 0, 4, 17, +- 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, +- 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, +- 5, 8, 0, 0, 0, 0, 7, 0 ++ 0, 0, 0, 0, 0, 0, 0, 0, 32, 30, ++ 19, 19, 30, 30, 30, 30, 30, 30, 30, 30, ++ 30, 30, 30, 30, 30, 30, 16, 17, 17, 30, ++ 17, 11, 11, 19, 27, 0, 3, 0, 28, 13, ++ 0, 0, 12, 0, 0, 0, 0, 0, 0, 0, ++ 0, 22, 24, 26, 25, 23, 0, 10, 29, 0, ++ 0, 0, 15, 15, 17, 17, 17, 11, 11, 11, ++ 0, 13, 0, 12, 0, 0, 0, 21, 0, 0, ++ 0, 0, 0, 0, 0, 0, 0, 17, 11, 11, ++ 11, 0, 14, 20, 0, 0, 0, 0, 0, 0, ++ ++ 0, 0, 0, 0, 17, 0, 0, 0, 0, 0, ++ 0, 0, 0, 0, 0, 17, 7, 0, 0, 0, ++ 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, ++ 0, 0, 0, 0, 4, 18, 0, 0, 5, 2, ++ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, ++ 0, 0, 1, 0, 0, 0, 0, 6, 9, 0, ++ 0, 0, 0, 8, 0 + } ; + + static yyconst flex_int32_t yy_ec[256] = +@@ -416,9 +416,9 @@ static yyconst flex_int32_t yy_ec[256] = + 22, 22, 22, 22, 24, 22, 22, 25, 22, 22, + 1, 26, 27, 1, 22, 1, 21, 28, 29, 30, + +- 31, 21, 22, 22, 32, 22, 22, 33, 34, 35, +- 36, 37, 22, 38, 39, 40, 41, 42, 22, 25, +- 43, 22, 44, 45, 46, 1, 1, 1, 1, 1, ++ 31, 21, 32, 22, 33, 22, 22, 34, 35, 36, ++ 37, 38, 22, 39, 40, 41, 42, 43, 22, 25, ++ 44, 22, 45, 46, 47, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, +@@ -435,163 +435,165 @@ static yyconst flex_int32_t yy_ec[256] = + 1, 1, 1, 1, 1 + } ; + +-static yyconst flex_int32_t yy_meta[47] = ++static yyconst flex_int32_t yy_meta[48] = + { 0, + 1, 1, 1, 1, 1, 1, 2, 3, 1, 2, + 2, 2, 4, 5, 5, 5, 6, 1, 1, 1, + 7, 8, 8, 8, 8, 1, 1, 7, 7, 7, + 7, 8, 8, 8, 8, 8, 8, 8, 8, 8, +- 8, 8, 8, 3, 1, 4 ++ 8, 8, 8, 8, 3, 1, 4 + } ; + +-static yyconst flex_int16_t yy_base[173] = ++static yyconst flex_int16_t yy_base[180] = + { 0, +- 0, 383, 34, 382, 65, 381, 37, 105, 387, 391, +- 54, 111, 367, 110, 109, 109, 112, 41, 366, 104, +- 367, 338, 124, 117, 0, 144, 391, 0, 121, 0, +- 135, 155, 140, 179, 391, 160, 391, 379, 391, 0, +- 368, 141, 391, 167, 370, 376, 346, 103, 342, 345, +- 391, 391, 391, 391, 391, 358, 391, 391, 175, 342, +- 338, 391, 355, 0, 185, 339, 184, 347, 346, 0, +- 0, 322, 175, 357, 175, 363, 352, 324, 330, 323, +- 332, 326, 201, 324, 329, 322, 391, 333, 181, 309, +- 391, 341, 340, 313, 320, 338, 178, 311, 146, 317, +- +- 314, 315, 335, 331, 303, 300, 309, 299, 308, 188, +- 336, 335, 391, 305, 320, 281, 283, 271, 203, 288, +- 281, 271, 266, 264, 245, 242, 208, 104, 391, 391, +- 244, 218, 204, 219, 206, 224, 201, 212, 204, 229, +- 215, 208, 207, 200, 219, 391, 233, 221, 200, 181, +- 391, 391, 149, 122, 86, 41, 391, 391, 245, 251, +- 259, 263, 267, 273, 280, 284, 292, 300, 304, 310, +- 318, 326 ++ 0, 393, 35, 392, 66, 391, 38, 107, 397, 401, ++ 55, 113, 377, 112, 111, 111, 114, 42, 376, 106, ++ 377, 347, 126, 120, 0, 147, 401, 0, 124, 0, ++ 137, 158, 170, 163, 401, 153, 401, 389, 401, 0, ++ 378, 120, 401, 131, 380, 386, 355, 139, 351, 355, ++ 351, 401, 401, 401, 401, 401, 367, 401, 401, 185, ++ 350, 346, 401, 364, 0, 185, 347, 189, 356, 355, ++ 0, 0, 330, 180, 366, 141, 372, 361, 332, 338, ++ 331, 341, 334, 326, 205, 331, 337, 329, 401, 341, ++ 167, 316, 401, 349, 348, 320, 328, 346, 180, 318, ++ ++ 324, 209, 324, 320, 322, 342, 338, 309, 306, 315, ++ 305, 315, 312, 192, 342, 341, 401, 293, 306, 282, ++ 268, 252, 255, 203, 285, 282, 272, 268, 252, 233, ++ 232, 239, 208, 107, 401, 401, 238, 211, 401, 211, ++ 212, 208, 228, 203, 215, 207, 233, 222, 212, 211, ++ 203, 227, 401, 237, 225, 204, 185, 401, 401, 149, ++ 128, 88, 42, 401, 401, 253, 259, 267, 271, 275, ++ 281, 288, 292, 300, 308, 312, 318, 326, 334 + } ; + +-static yyconst flex_int16_t yy_def[173] = ++static yyconst flex_int16_t yy_def[180] = + { 0, +- 158, 1, 1, 3, 158, 5, 1, 1, 158, 158, +- 158, 158, 158, 159, 160, 161, 158, 158, 158, 158, +- 162, 158, 158, 158, 163, 162, 158, 164, 165, 164, +- 164, 158, 158, 158, 158, 159, 158, 159, 158, 166, +- 158, 161, 158, 161, 167, 168, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 162, 158, 158, 158, 158, +- 158, 158, 162, 164, 165, 164, 158, 158, 158, 169, +- 166, 170, 161, 167, 167, 168, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 164, 158, 158, 169, 170, +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- +- 158, 164, 158, 158, 158, 158, 158, 158, 158, 171, +- 158, 164, 158, 158, 158, 158, 158, 158, 171, 158, +- 171, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 172, 158, 158, 158, 172, 158, 172, 158, 158, 158, +- 158, 158, 158, 158, 158, 158, 158, 0, 158, 158, +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 158, 158 ++ 165, 1, 1, 3, 165, 5, 1, 1, 165, 165, ++ 165, 165, 165, 166, 167, 168, 165, 165, 165, 165, ++ 169, 165, 165, 165, 170, 169, 165, 171, 172, 171, ++ 171, 165, 165, 165, 165, 166, 165, 166, 165, 173, ++ 165, 168, 165, 168, 174, 175, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 169, 165, 165, 165, ++ 165, 165, 165, 169, 171, 172, 171, 165, 165, 165, ++ 176, 173, 177, 168, 174, 174, 175, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 171, 165, 165, ++ 176, 177, 165, 165, 165, 165, 165, 165, 165, 165, ++ ++ 165, 165, 165, 165, 171, 165, 165, 165, 165, 165, ++ 165, 165, 165, 178, 165, 171, 165, 165, 165, 165, ++ 165, 165, 165, 178, 165, 178, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 179, 165, 165, ++ 165, 179, 165, 179, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 0, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165, 165 + } ; + +-static yyconst flex_int16_t yy_nxt[438] = ++static yyconst flex_int16_t yy_nxt[449] = + { 0, + 10, 11, 12, 11, 13, 14, 10, 15, 16, 10, + 10, 10, 17, 10, 10, 10, 10, 18, 19, 20, + 21, 21, 21, 21, 21, 10, 10, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, +- 21, 21, 21, 10, 22, 10, 24, 25, 25, 25, +- 32, 33, 33, 157, 26, 34, 34, 34, 51, 52, +- 27, 26, 26, 26, 26, 10, 11, 12, 11, 13, +- 14, 28, 15, 16, 28, 28, 28, 24, 28, 28, +- 28, 10, 18, 19, 20, 29, 29, 29, 29, 29, +- 30, 10, 29, 29, 29, 29, 29, 29, 29, 29, +- +- 29, 29, 29, 29, 29, 29, 29, 29, 10, 22, +- 10, 23, 34, 34, 34, 37, 39, 43, 32, 33, +- 33, 45, 54, 55, 46, 59, 45, 64, 156, 46, +- 64, 64, 64, 79, 44, 38, 59, 57, 134, 47, +- 135, 48, 80, 49, 47, 50, 48, 99, 61, 43, +- 50, 110, 41, 67, 67, 67, 60, 63, 63, 63, +- 57, 155, 68, 69, 63, 37, 44, 66, 67, 67, +- 67, 63, 63, 63, 63, 73, 59, 68, 69, 70, +- 34, 34, 34, 43, 75, 38, 154, 92, 83, 83, +- 83, 64, 44, 120, 64, 64, 64, 67, 67, 67, +- +- 44, 57, 99, 68, 69, 107, 68, 69, 120, 127, +- 108, 153, 152, 121, 83, 83, 83, 133, 133, 133, +- 146, 133, 133, 133, 146, 140, 140, 140, 121, 141, +- 140, 140, 140, 151, 141, 158, 150, 149, 148, 144, +- 147, 143, 142, 139, 147, 36, 36, 36, 36, 36, +- 36, 36, 36, 40, 138, 137, 136, 40, 40, 42, +- 42, 42, 42, 42, 42, 42, 42, 56, 56, 56, +- 56, 62, 132, 62, 64, 131, 130, 64, 129, 64, +- 64, 65, 128, 158, 65, 65, 65, 65, 71, 127, +- 71, 71, 74, 74, 74, 74, 74, 74, 74, 74, +- +- 76, 76, 76, 76, 76, 76, 76, 76, 89, 126, +- 89, 90, 125, 90, 90, 124, 90, 90, 119, 119, +- 119, 119, 119, 119, 119, 119, 145, 145, 145, 145, +- 145, 145, 145, 145, 123, 122, 59, 59, 118, 117, +- 116, 115, 114, 113, 45, 112, 108, 111, 109, 106, +- 105, 104, 46, 103, 91, 87, 102, 101, 100, 98, +- 97, 96, 95, 94, 93, 77, 75, 91, 88, 87, +- 86, 57, 85, 84, 57, 82, 81, 78, 77, 75, +- 72, 158, 58, 57, 53, 35, 158, 31, 23, 23, +- 9, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 158, 158 ++ 21, 21, 21, 21, 10, 22, 10, 24, 25, 25, ++ 25, 32, 33, 33, 164, 26, 34, 34, 34, 52, ++ 53, 27, 26, 26, 26, 26, 10, 11, 12, 11, ++ 13, 14, 28, 15, 16, 28, 28, 28, 24, 28, ++ 28, 28, 10, 18, 19, 20, 29, 29, 29, 29, ++ 29, 30, 10, 29, 29, 29, 29, 29, 29, 29, ++ ++ 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, ++ 10, 22, 10, 23, 34, 34, 34, 37, 39, 43, ++ 32, 33, 33, 45, 55, 56, 46, 60, 43, 45, ++ 65, 163, 46, 65, 65, 65, 44, 38, 60, 74, ++ 58, 47, 141, 48, 142, 44, 49, 47, 50, 48, ++ 76, 51, 62, 94, 50, 41, 44, 51, 37, 61, ++ 64, 64, 64, 58, 34, 34, 34, 64, 162, 80, ++ 67, 68, 68, 68, 64, 64, 64, 64, 38, 81, ++ 69, 70, 71, 68, 68, 68, 60, 161, 43, 69, ++ 70, 65, 69, 70, 65, 65, 65, 125, 85, 85, ++ ++ 85, 58, 68, 68, 68, 44, 102, 110, 125, 133, ++ 102, 69, 70, 111, 114, 160, 159, 126, 85, 85, ++ 85, 140, 140, 140, 140, 140, 140, 153, 126, 147, ++ 147, 147, 153, 148, 147, 147, 147, 158, 148, 165, ++ 157, 156, 155, 151, 150, 149, 146, 154, 145, 144, ++ 143, 139, 154, 36, 36, 36, 36, 36, 36, 36, ++ 36, 40, 138, 137, 136, 40, 40, 42, 42, 42, ++ 42, 42, 42, 42, 42, 57, 57, 57, 57, 63, ++ 135, 63, 65, 134, 165, 65, 133, 65, 65, 66, ++ 132, 131, 66, 66, 66, 66, 72, 130, 72, 72, ++ ++ 75, 75, 75, 75, 75, 75, 75, 75, 77, 77, ++ 77, 77, 77, 77, 77, 77, 91, 129, 91, 92, ++ 128, 92, 92, 127, 92, 92, 124, 124, 124, 124, ++ 124, 124, 124, 124, 152, 152, 152, 152, 152, 152, ++ 152, 152, 60, 60, 123, 122, 121, 120, 119, 118, ++ 117, 45, 116, 111, 115, 113, 112, 109, 108, 107, ++ 46, 106, 93, 89, 105, 104, 103, 101, 100, 99, ++ 98, 97, 96, 95, 78, 76, 93, 90, 89, 88, ++ 58, 87, 86, 58, 84, 83, 82, 79, 78, 76, ++ 73, 165, 59, 58, 54, 35, 165, 31, 23, 23, ++ ++ 9, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165 + } ; + +-static yyconst flex_int16_t yy_chk[438] = ++static yyconst flex_int16_t yy_chk[449] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, +- 1, 1, 1, 1, 1, 1, 3, 3, 3, 3, +- 7, 7, 7, 156, 3, 11, 11, 11, 18, 18, +- 3, 3, 3, 3, 3, 5, 5, 5, 5, 5, ++ 1, 1, 1, 1, 1, 1, 1, 3, 3, 3, ++ 3, 7, 7, 7, 163, 3, 11, 11, 11, 18, ++ 18, 3, 3, 3, 3, 3, 5, 5, 5, 5, + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, +- 5, 8, 12, 12, 12, 14, 15, 16, 8, 8, +- 8, 17, 20, 20, 17, 23, 24, 29, 155, 24, +- 29, 29, 29, 48, 16, 14, 31, 29, 128, 17, +- 128, 17, 48, 17, 24, 17, 24, 99, 24, 42, +- 24, 99, 15, 33, 33, 33, 23, 26, 26, 26, +- 26, 154, 33, 33, 26, 36, 42, 31, 32, 32, +- 32, 26, 26, 26, 26, 44, 59, 32, 32, 32, +- 34, 34, 34, 73, 75, 36, 153, 75, 59, 59, +- 59, 65, 44, 110, 65, 65, 65, 67, 67, 67, +- +- 73, 65, 83, 89, 89, 97, 67, 67, 119, 127, +- 97, 150, 149, 110, 83, 83, 83, 133, 133, 133, +- 141, 127, 127, 127, 145, 136, 136, 136, 119, 136, +- 140, 140, 140, 148, 140, 147, 144, 143, 142, 139, +- 141, 138, 137, 135, 145, 159, 159, 159, 159, 159, +- 159, 159, 159, 160, 134, 132, 131, 160, 160, 161, +- 161, 161, 161, 161, 161, 161, 161, 162, 162, 162, +- 162, 163, 126, 163, 164, 125, 124, 164, 123, 164, +- 164, 165, 122, 121, 165, 165, 165, 165, 166, 120, +- 166, 166, 167, 167, 167, 167, 167, 167, 167, 167, +- +- 168, 168, 168, 168, 168, 168, 168, 168, 169, 118, +- 169, 170, 117, 170, 170, 116, 170, 170, 171, 171, +- 171, 171, 171, 171, 171, 171, 172, 172, 172, 172, +- 172, 172, 172, 172, 115, 114, 112, 111, 109, 108, +- 107, 106, 105, 104, 103, 102, 101, 100, 98, 96, +- 95, 94, 93, 92, 90, 88, 86, 85, 84, 82, +- 81, 80, 79, 78, 77, 76, 74, 72, 69, 68, +- 66, 63, 61, 60, 56, 50, 49, 47, 46, 45, ++ 5, 5, 5, 8, 12, 12, 12, 14, 15, 16, ++ 8, 8, 8, 17, 20, 20, 17, 23, 42, 24, ++ 29, 162, 24, 29, 29, 29, 16, 14, 31, 44, ++ 29, 17, 134, 17, 134, 42, 17, 24, 17, 24, ++ 76, 17, 24, 76, 24, 15, 44, 24, 36, 23, ++ 26, 26, 26, 26, 34, 34, 34, 26, 161, 48, ++ 31, 32, 32, 32, 26, 26, 26, 26, 36, 48, ++ 32, 32, 32, 33, 33, 33, 60, 160, 74, 91, ++ 91, 66, 33, 33, 66, 66, 66, 114, 60, 60, ++ ++ 60, 66, 68, 68, 68, 74, 85, 99, 124, 133, ++ 102, 68, 68, 99, 102, 157, 156, 114, 85, 85, ++ 85, 133, 133, 133, 140, 140, 140, 148, 124, 143, ++ 143, 143, 152, 143, 147, 147, 147, 155, 147, 154, ++ 151, 150, 149, 146, 145, 144, 142, 148, 141, 138, ++ 137, 132, 152, 166, 166, 166, 166, 166, 166, 166, ++ 166, 167, 131, 130, 129, 167, 167, 168, 168, 168, ++ 168, 168, 168, 168, 168, 169, 169, 169, 169, 170, ++ 128, 170, 171, 127, 126, 171, 125, 171, 171, 172, ++ 123, 122, 172, 172, 172, 172, 173, 121, 173, 173, ++ ++ 174, 174, 174, 174, 174, 174, 174, 174, 175, 175, ++ 175, 175, 175, 175, 175, 175, 176, 120, 176, 177, ++ 119, 177, 177, 118, 177, 177, 178, 178, 178, 178, ++ 178, 178, 178, 178, 179, 179, 179, 179, 179, 179, ++ 179, 179, 116, 115, 113, 112, 111, 110, 109, 108, ++ 107, 106, 105, 104, 103, 101, 100, 98, 97, 96, ++ 95, 94, 92, 90, 88, 87, 86, 84, 83, 82, ++ 81, 80, 79, 78, 77, 75, 73, 70, 69, 67, ++ 64, 62, 61, 57, 51, 50, 49, 47, 46, 45, + 41, 38, 22, 21, 19, 13, 9, 6, 4, 2, +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, + +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 158, 158, 158, 158, 158, +- 158, 158, 158, 158, 158, 158, 158 ++ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, ++ 165, 165, 165, 165, 165, 165, 165, 165 + } ; + + static yy_state_type yy_last_accepting_state; +@@ -662,7 +664,7 @@ static int dts_version = 1; + static void push_input_file(const char *filename); + static bool pop_input_file(void); + static void lexical_error(const char *fmt, ...); +-#line 666 "dtc-lexer.lex.c" ++#line 668 "dtc-lexer.lex.c" + + #define INITIAL 0 + #define BYTESTRING 1 +@@ -704,7 +706,7 @@ FILE *yyget_out (void ); + + void yyset_out (FILE * out_str ); + +-yy_size_t yyget_leng (void ); ++int yyget_leng (void ); + + char *yyget_text (void ); + +@@ -853,6 +855,10 @@ YY_DECL + register char *yy_cp, *yy_bp; + register int yy_act; + ++#line 68 "dtc-lexer.l" ++ ++#line 861 "dtc-lexer.lex.c" ++ + if ( !(yy_init) ) + { + (yy_init) = 1; +@@ -879,11 +885,6 @@ YY_DECL + yy_load_buffer_state( ); + } + +- { +-#line 68 "dtc-lexer.l" +- +-#line 886 "dtc-lexer.lex.c" +- + while ( 1 ) /* loops until end-of-file is reached */ + { + yy_cp = (yy_c_buf_p); +@@ -901,7 +902,7 @@ YY_DECL + yy_match: + do + { +- register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; ++ register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; +@@ -910,13 +911,13 @@ yy_match: + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; +- if ( yy_current_state >= 159 ) ++ if ( yy_current_state >= 166 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + ++yy_cp; + } +- while ( yy_current_state != 158 ); ++ while ( yy_current_state != 165 ); + yy_cp = (yy_last_accepting_cpos); + yy_current_state = (yy_last_accepting_state); + +@@ -951,39 +952,31 @@ case 2: + YY_RULE_SETUP + #line 75 "dtc-lexer.l" + { +- char *line, *fnstart, *fnend; +- struct data fn; ++ char *line, *tmp, *fn; + /* skip text before line # */ + line = yytext; + while (!isdigit((unsigned char)*line)) + line++; +- +- /* regexp ensures that first and list " +- * in the whole yytext are those at +- * beginning and end of the filename string */ +- fnstart = memchr(yytext, '"', yyleng); +- for (fnend = yytext + yyleng - 1; +- *fnend != '"'; fnend--) +- ; +- assert(fnstart && fnend && (fnend > fnstart)); +- +- fn = data_copy_escape_string(fnstart + 1, +- fnend - fnstart - 1); +- +- /* Don't allow nuls in filenames */ +- if (memchr(fn.val, '\0', fn.len - 1)) +- lexical_error("nul in line number directive"); +- ++ /* skip digits in line # */ ++ tmp = line; ++ while (!isspace((unsigned char)*tmp)) ++ tmp++; ++ /* "NULL"-terminate line # */ ++ *tmp = '\0'; ++ /* start of filename */ ++ fn = strchr(tmp + 1, '"') + 1; ++ /* strip trailing " from filename */ ++ tmp = strchr(fn, '"'); ++ *tmp = 0; + /* -1 since #line is the number of the next line */ +- srcpos_set_line(xstrdup(fn.val), atoi(line) - 1); +- data_free(fn); ++ srcpos_set_line(xstrdup(fn), atoi(line) - 1); + } + YY_BREAK + case YY_STATE_EOF(INITIAL): + case YY_STATE_EOF(BYTESTRING): + case YY_STATE_EOF(PROPNODENAME): + case YY_STATE_EOF(V1): +-#line 104 "dtc-lexer.l" ++#line 96 "dtc-lexer.l" + { + if (!pop_input_file()) { + yyterminate(); +@@ -993,7 +986,7 @@ case YY_STATE_EOF(V1): + case 3: + /* rule 3 can match eol */ + YY_RULE_SETUP +-#line 110 "dtc-lexer.l" ++#line 102 "dtc-lexer.l" + { + DPRINT("String: %s\n", yytext); + yylval.data = data_copy_escape_string(yytext+1, +@@ -1003,7 +996,7 @@ YY_RULE_SETUP + YY_BREAK + case 4: + YY_RULE_SETUP +-#line 117 "dtc-lexer.l" ++#line 109 "dtc-lexer.l" + { + DPRINT("Keyword: /dts-v1/\n"); + dts_version = 1; +@@ -1013,25 +1006,33 @@ YY_RULE_SETUP + YY_BREAK + case 5: + YY_RULE_SETUP +-#line 124 "dtc-lexer.l" ++#line 116 "dtc-lexer.l" ++{ ++ DPRINT("Keyword: /plugin/\n"); ++ return DT_PLUGIN; ++ } ++ YY_BREAK ++case 6: ++YY_RULE_SETUP ++#line 121 "dtc-lexer.l" + { + DPRINT("Keyword: /memreserve/\n"); + BEGIN_DEFAULT(); + return DT_MEMRESERVE; + } + YY_BREAK +-case 6: ++case 7: + YY_RULE_SETUP +-#line 130 "dtc-lexer.l" ++#line 127 "dtc-lexer.l" + { + DPRINT("Keyword: /bits/\n"); + BEGIN_DEFAULT(); + return DT_BITS; + } + YY_BREAK +-case 7: ++case 8: + YY_RULE_SETUP +-#line 136 "dtc-lexer.l" ++#line 133 "dtc-lexer.l" + { + DPRINT("Keyword: /delete-property/\n"); + DPRINT("\n"); +@@ -1039,9 +1040,9 @@ YY_RULE_SETUP + return DT_DEL_PROP; + } + YY_BREAK +-case 8: ++case 9: + YY_RULE_SETUP +-#line 143 "dtc-lexer.l" ++#line 140 "dtc-lexer.l" + { + DPRINT("Keyword: /delete-node/\n"); + DPRINT("\n"); +@@ -1049,9 +1050,9 @@ YY_RULE_SETUP + return DT_DEL_NODE; + } + YY_BREAK +-case 9: ++case 10: + YY_RULE_SETUP +-#line 150 "dtc-lexer.l" ++#line 147 "dtc-lexer.l" + { + DPRINT("Label: %s\n", yytext); + yylval.labelref = xstrdup(yytext); +@@ -1059,9 +1060,9 @@ YY_RULE_SETUP + return DT_LABEL; + } + YY_BREAK +-case 10: ++case 11: + YY_RULE_SETUP +-#line 157 "dtc-lexer.l" ++#line 154 "dtc-lexer.l" + { + char *e; + DPRINT("Integer Literal: '%s'\n", yytext); +@@ -1069,10 +1070,7 @@ YY_RULE_SETUP + errno = 0; + yylval.integer = strtoull(yytext, &e, 0); + +- if (*e && e[strspn(e, "UL")]) { +- lexical_error("Bad integer literal '%s'", +- yytext); +- } ++ assert(!(*e) || !e[strspn(e, "UL")]); + + if (errno == ERANGE) + lexical_error("Integer literal '%s' out of range", +@@ -1084,10 +1082,10 @@ YY_RULE_SETUP + return DT_LITERAL; + } + YY_BREAK +-case 11: +-/* rule 11 can match eol */ ++case 12: ++/* rule 12 can match eol */ + YY_RULE_SETUP +-#line 179 "dtc-lexer.l" ++#line 173 "dtc-lexer.l" + { + struct data d; + DPRINT("Character literal: %s\n", yytext); +@@ -1109,18 +1107,18 @@ YY_RULE_SETUP + return DT_CHAR_LITERAL; + } + YY_BREAK +-case 12: ++case 13: + YY_RULE_SETUP +-#line 200 "dtc-lexer.l" ++#line 194 "dtc-lexer.l" + { /* label reference */ + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = xstrdup(yytext+1); + return DT_REF; + } + YY_BREAK +-case 13: ++case 14: + YY_RULE_SETUP +-#line 206 "dtc-lexer.l" ++#line 200 "dtc-lexer.l" + { /* new-style path reference */ + yytext[yyleng-1] = '\0'; + DPRINT("Ref: %s\n", yytext+2); +@@ -1128,27 +1126,27 @@ YY_RULE_SETUP + return DT_REF; + } + YY_BREAK +-case 14: ++case 15: + YY_RULE_SETUP +-#line 213 "dtc-lexer.l" ++#line 207 "dtc-lexer.l" + { + yylval.byte = strtol(yytext, NULL, 16); + DPRINT("Byte: %02x\n", (int)yylval.byte); + return DT_BYTE; + } + YY_BREAK +-case 15: ++case 16: + YY_RULE_SETUP +-#line 219 "dtc-lexer.l" ++#line 213 "dtc-lexer.l" + { + DPRINT("/BYTESTRING\n"); + BEGIN_DEFAULT(); + return ']'; + } + YY_BREAK +-case 16: ++case 17: + YY_RULE_SETUP +-#line 225 "dtc-lexer.l" ++#line 219 "dtc-lexer.l" + { + DPRINT("PropNodeName: %s\n", yytext); + yylval.propnodename = xstrdup((yytext[0] == '\\') ? +@@ -1157,75 +1155,75 @@ YY_RULE_SETUP + return DT_PROPNODENAME; + } + YY_BREAK +-case 17: ++case 18: + YY_RULE_SETUP +-#line 233 "dtc-lexer.l" ++#line 227 "dtc-lexer.l" + { + DPRINT("Binary Include\n"); + return DT_INCBIN; + } + YY_BREAK +-case 18: +-/* rule 18 can match eol */ +-YY_RULE_SETUP +-#line 238 "dtc-lexer.l" +-/* eat whitespace */ +- YY_BREAK + case 19: + /* rule 19 can match eol */ + YY_RULE_SETUP +-#line 239 "dtc-lexer.l" +-/* eat C-style comments */ ++#line 232 "dtc-lexer.l" ++/* eat whitespace */ + YY_BREAK + case 20: + /* rule 20 can match eol */ + YY_RULE_SETUP +-#line 240 "dtc-lexer.l" +-/* eat C++-style comments */ ++#line 233 "dtc-lexer.l" ++/* eat C-style comments */ + YY_BREAK + case 21: ++/* rule 21 can match eol */ + YY_RULE_SETUP +-#line 242 "dtc-lexer.l" +-{ return DT_LSHIFT; }; ++#line 234 "dtc-lexer.l" ++/* eat C++-style comments */ + YY_BREAK + case 22: + YY_RULE_SETUP +-#line 243 "dtc-lexer.l" +-{ return DT_RSHIFT; }; ++#line 236 "dtc-lexer.l" ++{ return DT_LSHIFT; }; + YY_BREAK + case 23: + YY_RULE_SETUP +-#line 244 "dtc-lexer.l" +-{ return DT_LE; }; ++#line 237 "dtc-lexer.l" ++{ return DT_RSHIFT; }; + YY_BREAK + case 24: + YY_RULE_SETUP +-#line 245 "dtc-lexer.l" +-{ return DT_GE; }; ++#line 238 "dtc-lexer.l" ++{ return DT_LE; }; + YY_BREAK + case 25: + YY_RULE_SETUP +-#line 246 "dtc-lexer.l" +-{ return DT_EQ; }; ++#line 239 "dtc-lexer.l" ++{ return DT_GE; }; + YY_BREAK + case 26: + YY_RULE_SETUP +-#line 247 "dtc-lexer.l" +-{ return DT_NE; }; ++#line 240 "dtc-lexer.l" ++{ return DT_EQ; }; + YY_BREAK + case 27: + YY_RULE_SETUP +-#line 248 "dtc-lexer.l" +-{ return DT_AND; }; ++#line 241 "dtc-lexer.l" ++{ return DT_NE; }; + YY_BREAK + case 28: + YY_RULE_SETUP +-#line 249 "dtc-lexer.l" +-{ return DT_OR; }; ++#line 242 "dtc-lexer.l" ++{ return DT_AND; }; + YY_BREAK + case 29: + YY_RULE_SETUP +-#line 251 "dtc-lexer.l" ++#line 243 "dtc-lexer.l" ++{ return DT_OR; }; ++ YY_BREAK ++case 30: ++YY_RULE_SETUP ++#line 245 "dtc-lexer.l" + { + DPRINT("Char: %c (\\x%02x)\n", yytext[0], + (unsigned)yytext[0]); +@@ -1241,12 +1239,12 @@ YY_RULE_SETUP + return yytext[0]; + } + YY_BREAK +-case 30: ++case 31: + YY_RULE_SETUP +-#line 266 "dtc-lexer.l" ++#line 260 "dtc-lexer.l" + ECHO; + YY_BREAK +-#line 1250 "dtc-lexer.lex.c" ++#line 1248 "dtc-lexer.lex.c" + + case YY_END_OF_BUFFER: + { +@@ -1376,7 +1374,6 @@ ECHO; + "fatal flex scanner internal error--no action found" ); + } /* end of action switch */ + } /* end of scanning one token */ +- } /* end of user's declarations */ + } /* end of yylex */ + + /* yy_get_next_buffer - try to read in a new buffer +@@ -1432,21 +1429,21 @@ static int yy_get_next_buffer (void) + + else + { +- yy_size_t num_to_read = ++ int num_to_read = + YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; + + while ( num_to_read <= 0 ) + { /* Not enough room in the buffer - grow it. */ + + /* just a shorter name for the current buffer */ +- YY_BUFFER_STATE b = YY_CURRENT_BUFFER_LVALUE; ++ YY_BUFFER_STATE b = YY_CURRENT_BUFFER; + + int yy_c_buf_p_offset = + (int) ((yy_c_buf_p) - b->yy_ch_buf); + + if ( b->yy_is_our_buffer ) + { +- yy_size_t new_size = b->yy_buf_size * 2; ++ int new_size = b->yy_buf_size * 2; + + if ( new_size <= 0 ) + b->yy_buf_size += b->yy_buf_size / 8; +@@ -1477,7 +1474,7 @@ static int yy_get_next_buffer (void) + + /* Read in more data. */ + YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), +- (yy_n_chars), num_to_read ); ++ (yy_n_chars), (size_t) num_to_read ); + + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } +@@ -1539,7 +1536,7 @@ static int yy_get_next_buffer (void) + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; +- if ( yy_current_state >= 159 ) ++ if ( yy_current_state >= 166 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; +@@ -1567,13 +1564,13 @@ static int yy_get_next_buffer (void) + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; +- if ( yy_current_state >= 159 ) ++ if ( yy_current_state >= 166 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; +- yy_is_jam = (yy_current_state == 158); ++ yy_is_jam = (yy_current_state == 165); + +- return yy_is_jam ? 0 : yy_current_state; ++ return yy_is_jam ? 0 : yy_current_state; + } + + #ifndef YY_NO_INPUT +@@ -1600,7 +1597,7 @@ static int yy_get_next_buffer (void) + + else + { /* need more input */ +- yy_size_t offset = (yy_c_buf_p) - (yytext_ptr); ++ int offset = (yy_c_buf_p) - (yytext_ptr); + ++(yy_c_buf_p); + + switch ( yy_get_next_buffer( ) ) +@@ -1874,7 +1871,7 @@ void yypop_buffer_state (void) + */ + static void yyensure_buffer_stack (void) + { +- yy_size_t num_to_alloc; ++ int num_to_alloc; + + if (!(yy_buffer_stack)) { + +@@ -1971,12 +1968,12 @@ YY_BUFFER_STATE yy_scan_string (yyconst + * + * @return the newly allocated buffer state object. + */ +-YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len ) ++YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len ) + { + YY_BUFFER_STATE b; + char *buf; + yy_size_t n; +- yy_size_t i; ++ int i; + + /* Get memory for full buffer, including space for trailing EOB's. */ + n = _yybytes_len + 2; +@@ -2058,7 +2055,7 @@ FILE *yyget_out (void) + /** Get the length of the current token. + * + */ +-yy_size_t yyget_leng (void) ++int yyget_leng (void) + { + return yyleng; + } +@@ -2206,7 +2203,7 @@ void yyfree (void * ptr ) + + #define YYTABLES_NAME "yytables" + +-#line 265 "dtc-lexer.l" ++#line 260 "dtc-lexer.l" + + + +--- a/scripts/dtc/dtc-parser.tab.c_shipped ++++ b/scripts/dtc/dtc-parser.tab.c_shipped +@@ -65,6 +65,7 @@ + #line 20 "dtc-parser.y" /* yacc.c:339 */ + + #include ++#include + + #include "dtc.h" + #include "srcpos.h" +@@ -80,7 +81,7 @@ extern void yyerror(char const *s); + extern struct boot_info *the_boot_info; + extern bool treesource_error; + +-#line 84 "dtc-parser.tab.c" /* yacc.c:339 */ ++#line 85 "dtc-parser.tab.c" /* yacc.c:339 */ + + # ifndef YY_NULLPTR + # if defined __cplusplus && 201103L <= __cplusplus +@@ -116,26 +117,27 @@ extern int yydebug; + enum yytokentype + { + DT_V1 = 258, +- DT_MEMRESERVE = 259, +- DT_LSHIFT = 260, +- DT_RSHIFT = 261, +- DT_LE = 262, +- DT_GE = 263, +- DT_EQ = 264, +- DT_NE = 265, +- DT_AND = 266, +- DT_OR = 267, +- DT_BITS = 268, +- DT_DEL_PROP = 269, +- DT_DEL_NODE = 270, +- DT_PROPNODENAME = 271, +- DT_LITERAL = 272, +- DT_CHAR_LITERAL = 273, +- DT_BYTE = 274, +- DT_STRING = 275, +- DT_LABEL = 276, +- DT_REF = 277, +- DT_INCBIN = 278 ++ DT_PLUGIN = 259, ++ DT_MEMRESERVE = 260, ++ DT_LSHIFT = 261, ++ DT_RSHIFT = 262, ++ DT_LE = 263, ++ DT_GE = 264, ++ DT_EQ = 265, ++ DT_NE = 266, ++ DT_AND = 267, ++ DT_OR = 268, ++ DT_BITS = 269, ++ DT_DEL_PROP = 270, ++ DT_DEL_NODE = 271, ++ DT_PROPNODENAME = 272, ++ DT_LITERAL = 273, ++ DT_CHAR_LITERAL = 274, ++ DT_BYTE = 275, ++ DT_STRING = 276, ++ DT_LABEL = 277, ++ DT_REF = 278, ++ DT_INCBIN = 279 + }; + #endif + +@@ -144,7 +146,7 @@ extern int yydebug; + typedef union YYSTYPE YYSTYPE; + union YYSTYPE + { +-#line 38 "dtc-parser.y" /* yacc.c:355 */ ++#line 39 "dtc-parser.y" /* yacc.c:355 */ + + char *propnodename; + char *labelref; +@@ -162,8 +164,9 @@ union YYSTYPE + struct node *nodelist; + struct reserve_info *re; + uint64_t integer; ++ bool is_plugin; + +-#line 167 "dtc-parser.tab.c" /* yacc.c:355 */ ++#line 170 "dtc-parser.tab.c" /* yacc.c:355 */ + }; + # define YYSTYPE_IS_TRIVIAL 1 + # define YYSTYPE_IS_DECLARED 1 +@@ -192,7 +195,7 @@ int yyparse (void); + + /* Copy the second part of user declarations. */ + +-#line 196 "dtc-parser.tab.c" /* yacc.c:358 */ ++#line 199 "dtc-parser.tab.c" /* yacc.c:358 */ + + #ifdef short + # undef short +@@ -439,18 +442,18 @@ union yyalloc + #define YYLAST 136 + + /* YYNTOKENS -- Number of terminals. */ +-#define YYNTOKENS 47 ++#define YYNTOKENS 48 + /* YYNNTS -- Number of nonterminals. */ +-#define YYNNTS 28 ++#define YYNNTS 29 + /* YYNRULES -- Number of rules. */ +-#define YYNRULES 80 ++#define YYNRULES 82 + /* YYNSTATES -- Number of states. */ +-#define YYNSTATES 144 ++#define YYNSTATES 147 + + /* YYTRANSLATE[YYX] -- Symbol number corresponding to YYX as returned + by yylex, with out-of-bounds checking. */ + #define YYUNDEFTOK 2 +-#define YYMAXUTOK 278 ++#define YYMAXUTOK 279 + + #define YYTRANSLATE(YYX) \ + ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) +@@ -462,16 +465,16 @@ static const yytype_uint8 yytranslate[] + 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, +- 2, 2, 2, 46, 2, 2, 2, 44, 40, 2, +- 32, 34, 43, 41, 33, 42, 2, 25, 2, 2, +- 2, 2, 2, 2, 2, 2, 2, 2, 37, 24, +- 35, 28, 29, 36, 2, 2, 2, 2, 2, 2, ++ 2, 2, 2, 47, 2, 2, 2, 45, 41, 2, ++ 33, 35, 44, 42, 34, 43, 2, 26, 2, 2, ++ 2, 2, 2, 2, 2, 2, 2, 2, 38, 25, ++ 36, 29, 30, 37, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, +- 2, 30, 2, 31, 39, 2, 2, 2, 2, 2, ++ 2, 31, 2, 32, 40, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, +- 2, 2, 2, 26, 38, 27, 45, 2, 2, 2, ++ 2, 2, 2, 27, 39, 28, 46, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, +@@ -486,22 +489,22 @@ static const yytype_uint8 yytranslate[] + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, + 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, +- 15, 16, 17, 18, 19, 20, 21, 22, 23 ++ 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 + }; + + #if YYDEBUG + /* YYRLINE[YYN] -- Source line where rule number YYN was defined. */ + static const yytype_uint16 yyrline[] = + { +- 0, 104, 104, 113, 116, 123, 127, 135, 139, 144, +- 155, 165, 180, 188, 191, 198, 202, 206, 210, 218, +- 222, 226, 230, 234, 250, 260, 268, 271, 275, 282, +- 298, 303, 322, 336, 343, 344, 345, 352, 356, 357, +- 361, 362, 366, 367, 371, 372, 376, 377, 381, 382, +- 386, 387, 388, 392, 393, 394, 395, 396, 400, 401, +- 402, 406, 407, 408, 412, 413, 422, 431, 435, 436, +- 437, 438, 443, 446, 450, 458, 461, 465, 473, 477, +- 481 ++ 0, 108, 108, 118, 121, 129, 132, 139, 143, 151, ++ 155, 160, 171, 181, 196, 204, 207, 214, 218, 222, ++ 226, 234, 238, 242, 246, 250, 266, 276, 284, 287, ++ 291, 298, 314, 319, 338, 352, 359, 360, 361, 368, ++ 372, 373, 377, 378, 382, 383, 387, 388, 392, 393, ++ 397, 398, 402, 403, 404, 408, 409, 410, 411, 412, ++ 416, 417, 418, 422, 423, 424, 428, 429, 430, 431, ++ 435, 436, 437, 438, 443, 446, 450, 458, 461, 465, ++ 473, 477, 481 + }; + #endif + +@@ -510,19 +513,19 @@ static const yytype_uint16 yyrline[] = + First, the terminals, then, starting at YYNTOKENS, nonterminals. */ + static const char *const yytname[] = + { +- "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE", "DT_LSHIFT", +- "DT_RSHIFT", "DT_LE", "DT_GE", "DT_EQ", "DT_NE", "DT_AND", "DT_OR", +- "DT_BITS", "DT_DEL_PROP", "DT_DEL_NODE", "DT_PROPNODENAME", "DT_LITERAL", +- "DT_CHAR_LITERAL", "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", +- "DT_INCBIN", "';'", "'/'", "'{'", "'}'", "'='", "'>'", "'['", "']'", +- "'('", "','", "')'", "'<'", "'?'", "':'", "'|'", "'^'", "'&'", "'+'", +- "'-'", "'*'", "'%'", "'~'", "'!'", "$accept", "sourcefile", +- "memreserves", "memreserve", "devicetree", "nodedef", "proplist", +- "propdef", "propdata", "propdataprefix", "arrayprefix", "integer_prim", +- "integer_expr", "integer_trinary", "integer_or", "integer_and", +- "integer_bitor", "integer_bitxor", "integer_bitand", "integer_eq", +- "integer_rela", "integer_shift", "integer_add", "integer_mul", +- "integer_unary", "bytestring", "subnodes", "subnode", YY_NULLPTR ++ "$end", "error", "$undefined", "DT_V1", "DT_PLUGIN", "DT_MEMRESERVE", ++ "DT_LSHIFT", "DT_RSHIFT", "DT_LE", "DT_GE", "DT_EQ", "DT_NE", "DT_AND", ++ "DT_OR", "DT_BITS", "DT_DEL_PROP", "DT_DEL_NODE", "DT_PROPNODENAME", ++ "DT_LITERAL", "DT_CHAR_LITERAL", "DT_BYTE", "DT_STRING", "DT_LABEL", ++ "DT_REF", "DT_INCBIN", "';'", "'/'", "'{'", "'}'", "'='", "'>'", "'['", ++ "']'", "'('", "','", "')'", "'<'", "'?'", "':'", "'|'", "'^'", "'&'", ++ "'+'", "'-'", "'*'", "'%'", "'~'", "'!'", "$accept", "sourcefile", ++ "plugindecl", "memreserves", "memreserve", "devicetree", "nodedef", ++ "proplist", "propdef", "propdata", "propdataprefix", "arrayprefix", ++ "integer_prim", "integer_expr", "integer_trinary", "integer_or", ++ "integer_and", "integer_bitor", "integer_bitxor", "integer_bitand", ++ "integer_eq", "integer_rela", "integer_shift", "integer_add", ++ "integer_mul", "integer_unary", "bytestring", "subnodes", "subnode", YY_NULLPTR + }; + #endif + +@@ -533,16 +536,16 @@ static const yytype_uint16 yytoknum[] = + { + 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, + 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, +- 275, 276, 277, 278, 59, 47, 123, 125, 61, 62, +- 91, 93, 40, 44, 41, 60, 63, 58, 124, 94, +- 38, 43, 45, 42, 37, 126, 33 ++ 275, 276, 277, 278, 279, 59, 47, 123, 125, 61, ++ 62, 91, 93, 40, 44, 41, 60, 63, 58, 124, ++ 94, 38, 43, 45, 42, 37, 126, 33 + }; + # endif + +-#define YYPACT_NINF -81 ++#define YYPACT_NINF -84 + + #define yypact_value_is_default(Yystate) \ +- (!!((Yystate) == (-81))) ++ (!!((Yystate) == (-84))) + + #define YYTABLE_NINF -1 + +@@ -553,21 +556,21 @@ static const yytype_uint16 yytoknum[] = + STATE-NUM. */ + static const yytype_int8 yypact[] = + { +- 16, -11, 21, 10, -81, 25, 10, 19, 10, -81, +- -81, -9, 25, -81, 2, 51, -81, -9, -9, -9, +- -81, 1, -81, -6, 50, 14, 28, 29, 36, 3, +- 58, 44, -3, -81, 47, -81, -81, 65, 68, 2, +- 2, -81, -81, -81, -81, -9, -9, -9, -9, -9, +- -9, -9, -9, -9, -9, -9, -9, -9, -9, -9, +- -9, -9, -9, -9, -81, 63, 69, 2, -81, -81, +- 50, 57, 14, 28, 29, 36, 3, 3, 58, 58, +- 58, 58, 44, 44, -3, -3, -81, -81, -81, 79, +- 80, -8, 63, -81, 72, 63, -81, -81, -9, 76, +- 77, -81, -81, -81, -81, -81, 78, -81, -81, -81, +- -81, -81, 35, 4, -81, -81, -81, -81, 86, -81, +- -81, -81, 73, -81, -81, 33, 71, 84, 39, -81, +- -81, -81, -81, -81, 41, -81, -81, -81, 25, -81, +- 74, 25, 75, -81 ++ 15, -12, 35, 42, -84, 27, 9, -84, 24, 9, ++ 43, 9, -84, -84, -10, 24, -84, 60, 44, -84, ++ -10, -10, -10, -84, 55, -84, -7, 52, 53, 51, ++ 54, 10, 2, 38, 37, -4, -84, 68, -84, -84, ++ 71, 73, 60, 60, -84, -84, -84, -84, -10, -10, ++ -10, -10, -10, -10, -10, -10, -10, -10, -10, -10, ++ -10, -10, -10, -10, -10, -10, -10, -84, 56, 72, ++ 60, -84, -84, 52, 61, 53, 51, 54, 10, 2, ++ 2, 38, 38, 38, 38, 37, 37, -4, -4, -84, ++ -84, -84, 81, 83, 34, 56, -84, 74, 56, -84, ++ -84, -10, 76, 78, -84, -84, -84, -84, -84, 79, ++ -84, -84, -84, -84, -84, -6, 3, -84, -84, -84, ++ -84, 87, -84, -84, -84, 75, -84, -84, 32, 70, ++ 86, 36, -84, -84, -84, -84, -84, 47, -84, -84, ++ -84, 24, -84, 77, 24, 80, -84 + }; + + /* YYDEFACT[STATE-NUM] -- Default reduction number in state STATE-NUM. +@@ -575,37 +578,37 @@ static const yytype_int8 yypact[] = + means the default is an error. */ + static const yytype_uint8 yydefact[] = + { +- 0, 0, 0, 3, 1, 0, 0, 0, 3, 34, +- 35, 0, 0, 6, 0, 2, 4, 0, 0, 0, +- 68, 0, 37, 38, 40, 42, 44, 46, 48, 50, +- 53, 60, 63, 67, 0, 13, 7, 0, 0, 0, +- 0, 69, 70, 71, 36, 0, 0, 0, 0, 0, ++ 0, 0, 0, 3, 1, 0, 5, 4, 0, 0, ++ 0, 5, 36, 37, 0, 0, 8, 0, 2, 6, ++ 0, 0, 0, 70, 0, 39, 40, 42, 44, 46, ++ 48, 50, 52, 55, 62, 65, 69, 0, 15, 9, ++ 0, 0, 0, 0, 71, 72, 73, 38, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, +- 0, 0, 0, 0, 5, 75, 0, 0, 10, 8, +- 41, 0, 43, 45, 47, 49, 51, 52, 56, 57, +- 55, 54, 58, 59, 61, 62, 65, 64, 66, 0, +- 0, 0, 0, 14, 0, 75, 11, 9, 0, 0, +- 0, 16, 26, 78, 18, 80, 0, 77, 76, 39, +- 17, 79, 0, 0, 12, 25, 15, 27, 0, 19, +- 28, 22, 0, 72, 30, 0, 0, 0, 0, 33, +- 32, 20, 31, 29, 0, 73, 74, 21, 0, 24, +- 0, 0, 0, 23 ++ 0, 0, 0, 0, 0, 0, 0, 7, 77, 0, ++ 0, 12, 10, 43, 0, 45, 47, 49, 51, 53, ++ 54, 58, 59, 57, 56, 60, 61, 63, 64, 67, ++ 66, 68, 0, 0, 0, 0, 16, 0, 77, 13, ++ 11, 0, 0, 0, 18, 28, 80, 20, 82, 0, ++ 79, 78, 41, 19, 81, 0, 0, 14, 27, 17, ++ 29, 0, 21, 30, 24, 0, 74, 32, 0, 0, ++ 0, 0, 35, 34, 22, 33, 31, 0, 75, 76, ++ 23, 0, 26, 0, 0, 0, 25 + }; + + /* YYPGOTO[NTERM-NUM]. */ + static const yytype_int8 yypgoto[] = + { +- -81, -81, 100, 104, -81, -38, -81, -80, -81, -81, +- -81, -5, 66, 13, -81, 70, 67, 81, 64, 82, +- 37, 27, 34, 38, -14, -81, 22, 24 ++ -84, -84, -84, 98, 101, -84, -41, -84, -83, -84, ++ -84, -84, -8, 63, 12, -84, 66, 67, 65, 69, ++ 82, 29, 18, 25, 26, -17, -84, 20, 28 + }; + + /* YYDEFGOTO[NTERM-NUM]. */ + static const yytype_int16 yydefgoto[] = + { +- -1, 2, 7, 8, 15, 36, 65, 93, 112, 113, +- 125, 20, 21, 22, 23, 24, 25, 26, 27, 28, +- 29, 30, 31, 32, 33, 128, 94, 95 ++ -1, 2, 6, 10, 11, 18, 39, 68, 96, 115, ++ 116, 128, 23, 24, 25, 26, 27, 28, 29, 30, ++ 31, 32, 33, 34, 35, 36, 131, 97, 98 + }; + + /* YYTABLE[YYPACT[STATE-NUM]] -- What to do in state STATE-NUM. If +@@ -613,87 +616,87 @@ static const yytype_int16 yydefgoto[] = + number is the opposite. If YYTABLE_NINF, syntax error. */ + static const yytype_uint8 yytable[] = + { +- 12, 68, 69, 41, 42, 43, 45, 34, 9, 10, +- 53, 54, 104, 3, 5, 107, 101, 118, 35, 1, +- 102, 4, 61, 11, 119, 120, 121, 122, 35, 97, +- 46, 6, 55, 17, 123, 44, 18, 19, 56, 124, +- 62, 63, 9, 10, 14, 51, 52, 86, 87, 88, +- 9, 10, 48, 103, 129, 130, 115, 11, 135, 116, +- 136, 47, 131, 57, 58, 11, 37, 49, 117, 50, +- 137, 64, 38, 39, 138, 139, 40, 89, 90, 91, +- 78, 79, 80, 81, 92, 59, 60, 66, 76, 77, +- 67, 82, 83, 96, 98, 99, 100, 84, 85, 106, +- 110, 111, 114, 126, 134, 127, 133, 141, 16, 143, +- 13, 109, 71, 74, 72, 70, 105, 108, 0, 0, +- 132, 0, 0, 0, 0, 0, 0, 0, 0, 73, +- 0, 0, 75, 140, 0, 0, 142 ++ 15, 71, 72, 44, 45, 46, 48, 37, 12, 13, ++ 56, 57, 107, 3, 8, 110, 118, 121, 1, 119, ++ 54, 55, 64, 14, 122, 123, 124, 125, 120, 100, ++ 49, 9, 58, 20, 126, 4, 21, 22, 59, 127, ++ 65, 66, 12, 13, 60, 61, 5, 89, 90, 91, ++ 12, 13, 7, 106, 132, 133, 138, 14, 139, 104, ++ 40, 38, 134, 105, 50, 14, 41, 42, 140, 17, ++ 43, 92, 93, 94, 81, 82, 83, 84, 95, 62, ++ 63, 141, 142, 79, 80, 85, 86, 38, 87, 88, ++ 47, 52, 51, 67, 69, 53, 70, 99, 102, 101, ++ 103, 113, 109, 114, 117, 129, 136, 137, 130, 19, ++ 16, 144, 74, 112, 73, 146, 76, 75, 111, 0, ++ 135, 77, 0, 108, 0, 0, 0, 0, 0, 0, ++ 0, 0, 0, 143, 0, 78, 145 + }; + + static const yytype_int16 yycheck[] = + { +- 5, 39, 40, 17, 18, 19, 12, 12, 17, 18, +- 7, 8, 92, 24, 4, 95, 24, 13, 26, 3, +- 28, 0, 25, 32, 20, 21, 22, 23, 26, 67, +- 36, 21, 29, 42, 30, 34, 45, 46, 35, 35, +- 43, 44, 17, 18, 25, 9, 10, 61, 62, 63, +- 17, 18, 38, 91, 21, 22, 21, 32, 19, 24, +- 21, 11, 29, 5, 6, 32, 15, 39, 33, 40, +- 31, 24, 21, 22, 33, 34, 25, 14, 15, 16, +- 53, 54, 55, 56, 21, 41, 42, 22, 51, 52, +- 22, 57, 58, 24, 37, 16, 16, 59, 60, 27, +- 24, 24, 24, 17, 20, 32, 35, 33, 8, 34, +- 6, 98, 46, 49, 47, 45, 92, 95, -1, -1, +- 125, -1, -1, -1, -1, -1, -1, -1, -1, 48, +- -1, -1, 50, 138, -1, -1, 141 ++ 8, 42, 43, 20, 21, 22, 13, 15, 18, 19, ++ 8, 9, 95, 25, 5, 98, 22, 14, 3, 25, ++ 10, 11, 26, 33, 21, 22, 23, 24, 34, 70, ++ 37, 22, 30, 43, 31, 0, 46, 47, 36, 36, ++ 44, 45, 18, 19, 6, 7, 4, 64, 65, 66, ++ 18, 19, 25, 94, 22, 23, 20, 33, 22, 25, ++ 16, 27, 30, 29, 12, 33, 22, 23, 32, 26, ++ 26, 15, 16, 17, 56, 57, 58, 59, 22, 42, ++ 43, 34, 35, 54, 55, 60, 61, 27, 62, 63, ++ 35, 40, 39, 25, 23, 41, 23, 25, 17, 38, ++ 17, 25, 28, 25, 25, 18, 36, 21, 33, 11, ++ 9, 34, 49, 101, 48, 35, 51, 50, 98, -1, ++ 128, 52, -1, 95, -1, -1, -1, -1, -1, -1, ++ -1, -1, -1, 141, -1, 53, 144 + }; + + /* YYSTOS[STATE-NUM] -- The (internal number of the) accessing + symbol of state STATE-NUM. */ + static const yytype_uint8 yystos[] = + { +- 0, 3, 48, 24, 0, 4, 21, 49, 50, 17, +- 18, 32, 58, 50, 25, 51, 49, 42, 45, 46, +- 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, +- 68, 69, 70, 71, 58, 26, 52, 15, 21, 22, +- 25, 71, 71, 71, 34, 12, 36, 11, 38, 39, +- 40, 9, 10, 7, 8, 29, 35, 5, 6, 41, +- 42, 25, 43, 44, 24, 53, 22, 22, 52, 52, +- 62, 59, 63, 64, 65, 66, 67, 67, 68, 68, +- 68, 68, 69, 69, 70, 70, 71, 71, 71, 14, +- 15, 16, 21, 54, 73, 74, 24, 52, 37, 16, +- 16, 24, 28, 52, 54, 74, 27, 54, 73, 60, +- 24, 24, 55, 56, 24, 21, 24, 33, 13, 20, +- 21, 22, 23, 30, 35, 57, 17, 32, 72, 21, +- 22, 29, 58, 35, 20, 19, 21, 31, 33, 34, +- 58, 33, 58, 34 ++ 0, 3, 49, 25, 0, 4, 50, 25, 5, 22, ++ 51, 52, 18, 19, 33, 60, 52, 26, 53, 51, ++ 43, 46, 47, 60, 61, 62, 63, 64, 65, 66, ++ 67, 68, 69, 70, 71, 72, 73, 60, 27, 54, ++ 16, 22, 23, 26, 73, 73, 73, 35, 13, 37, ++ 12, 39, 40, 41, 10, 11, 8, 9, 30, 36, ++ 6, 7, 42, 43, 26, 44, 45, 25, 55, 23, ++ 23, 54, 54, 64, 61, 65, 66, 67, 68, 69, ++ 69, 70, 70, 70, 70, 71, 71, 72, 72, 73, ++ 73, 73, 15, 16, 17, 22, 56, 75, 76, 25, ++ 54, 38, 17, 17, 25, 29, 54, 56, 76, 28, ++ 56, 75, 62, 25, 25, 57, 58, 25, 22, 25, ++ 34, 14, 21, 22, 23, 24, 31, 36, 59, 18, ++ 33, 74, 22, 23, 30, 60, 36, 21, 20, 22, ++ 32, 34, 35, 60, 34, 60, 35 + }; + + /* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ + static const yytype_uint8 yyr1[] = + { +- 0, 47, 48, 49, 49, 50, 50, 51, 51, 51, +- 51, 51, 52, 53, 53, 54, 54, 54, 54, 55, +- 55, 55, 55, 55, 55, 55, 56, 56, 56, 57, +- 57, 57, 57, 57, 58, 58, 58, 59, 60, 60, +- 61, 61, 62, 62, 63, 63, 64, 64, 65, 65, +- 66, 66, 66, 67, 67, 67, 67, 67, 68, 68, +- 68, 69, 69, 69, 70, 70, 70, 70, 71, 71, +- 71, 71, 72, 72, 72, 73, 73, 73, 74, 74, +- 74 ++ 0, 48, 49, 50, 50, 51, 51, 52, 52, 53, ++ 53, 53, 53, 53, 54, 55, 55, 56, 56, 56, ++ 56, 57, 57, 57, 57, 57, 57, 57, 58, 58, ++ 58, 59, 59, 59, 59, 59, 60, 60, 60, 61, ++ 62, 62, 63, 63, 64, 64, 65, 65, 66, 66, ++ 67, 67, 68, 68, 68, 69, 69, 69, 69, 69, ++ 70, 70, 70, 71, 71, 71, 72, 72, 72, 72, ++ 73, 73, 73, 73, 74, 74, 74, 75, 75, 75, ++ 76, 76, 76 + }; + + /* YYR2[YYN] -- Number of symbols on the right hand side of rule YYN. */ + static const yytype_uint8 yyr2[] = + { +- 0, 2, 4, 0, 2, 4, 2, 2, 3, 4, +- 3, 4, 5, 0, 2, 4, 2, 3, 2, 2, +- 3, 4, 2, 9, 5, 2, 0, 2, 2, 3, +- 1, 2, 2, 2, 1, 1, 3, 1, 1, 5, +- 1, 3, 1, 3, 1, 3, 1, 3, 1, 3, +- 1, 3, 3, 1, 3, 3, 3, 3, 3, 3, +- 1, 3, 3, 1, 3, 3, 3, 1, 1, 2, +- 2, 2, 0, 2, 2, 0, 2, 2, 2, 3, +- 2 ++ 0, 2, 5, 0, 2, 0, 2, 4, 2, 2, ++ 3, 4, 3, 4, 5, 0, 2, 4, 2, 3, ++ 2, 2, 3, 4, 2, 9, 5, 2, 0, 2, ++ 2, 3, 1, 2, 2, 2, 1, 1, 3, 1, ++ 1, 5, 1, 3, 1, 3, 1, 3, 1, 3, ++ 1, 3, 1, 3, 3, 1, 3, 3, 3, 3, ++ 3, 3, 1, 3, 3, 1, 3, 3, 3, 1, ++ 1, 2, 2, 2, 0, 2, 2, 0, 2, 2, ++ 2, 3, 2 + }; + + +@@ -1463,65 +1466,82 @@ yyreduce: + switch (yyn) + { + case 2: +-#line 105 "dtc-parser.y" /* yacc.c:1646 */ ++#line 109 "dtc-parser.y" /* yacc.c:1646 */ + { ++ (yyvsp[0].node)->is_plugin = (yyvsp[-2].is_plugin); + the_boot_info = build_boot_info((yyvsp[-1].re), (yyvsp[0].node), + guess_boot_cpuid((yyvsp[0].node))); + } +-#line 1472 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1476 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + + case 3: +-#line 113 "dtc-parser.y" /* yacc.c:1646 */ ++#line 118 "dtc-parser.y" /* yacc.c:1646 */ + { +- (yyval.re) = NULL; ++ (yyval.is_plugin) = false; + } +-#line 1480 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1484 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + + case 4: +-#line 117 "dtc-parser.y" /* yacc.c:1646 */ ++#line 122 "dtc-parser.y" /* yacc.c:1646 */ + { +- (yyval.re) = chain_reserve_entry((yyvsp[-1].re), (yyvsp[0].re)); ++ (yyval.is_plugin) = true; + } +-#line 1488 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1492 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + + case 5: +-#line 124 "dtc-parser.y" /* yacc.c:1646 */ ++#line 129 "dtc-parser.y" /* yacc.c:1646 */ + { +- (yyval.re) = build_reserve_entry((yyvsp[-2].integer), (yyvsp[-1].integer)); ++ (yyval.re) = NULL; + } +-#line 1496 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1500 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + + case 6: +-#line 128 "dtc-parser.y" /* yacc.c:1646 */ ++#line 133 "dtc-parser.y" /* yacc.c:1646 */ ++ { ++ (yyval.re) = chain_reserve_entry((yyvsp[-1].re), (yyvsp[0].re)); ++ } ++#line 1508 "dtc-parser.tab.c" /* yacc.c:1646 */ ++ break; ++ ++ case 7: ++#line 140 "dtc-parser.y" /* yacc.c:1646 */ ++ { ++ (yyval.re) = build_reserve_entry((yyvsp[-2].integer), (yyvsp[-1].integer)); ++ } ++#line 1516 "dtc-parser.tab.c" /* yacc.c:1646 */ ++ break; ++ ++ case 8: ++#line 144 "dtc-parser.y" /* yacc.c:1646 */ + { + add_label(&(yyvsp[0].re)->labels, (yyvsp[-1].labelref)); + (yyval.re) = (yyvsp[0].re); + } +-#line 1505 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1525 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 7: +-#line 136 "dtc-parser.y" /* yacc.c:1646 */ ++ case 9: ++#line 152 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.node) = name_node((yyvsp[0].node), ""); + } +-#line 1513 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1533 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 8: +-#line 140 "dtc-parser.y" /* yacc.c:1646 */ ++ case 10: ++#line 156 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.node) = merge_nodes((yyvsp[-2].node), (yyvsp[0].node)); + } +-#line 1521 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1541 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 9: +-#line 145 "dtc-parser.y" /* yacc.c:1646 */ ++ case 11: ++#line 161 "dtc-parser.y" /* yacc.c:1646 */ + { + struct node *target = get_node_by_ref((yyvsp[-3].node), (yyvsp[-1].labelref)); + +@@ -1532,11 +1552,11 @@ yyreduce: + ERROR(&(yylsp[-1]), "Label or path %s not found", (yyvsp[-1].labelref)); + (yyval.node) = (yyvsp[-3].node); + } +-#line 1536 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1556 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 10: +-#line 156 "dtc-parser.y" /* yacc.c:1646 */ ++ case 12: ++#line 172 "dtc-parser.y" /* yacc.c:1646 */ + { + struct node *target = get_node_by_ref((yyvsp[-2].node), (yyvsp[-1].labelref)); + +@@ -1546,11 +1566,11 @@ yyreduce: + ERROR(&(yylsp[-1]), "Label or path %s not found", (yyvsp[-1].labelref)); + (yyval.node) = (yyvsp[-2].node); + } +-#line 1550 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1570 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 11: +-#line 166 "dtc-parser.y" /* yacc.c:1646 */ ++ case 13: ++#line 182 "dtc-parser.y" /* yacc.c:1646 */ + { + struct node *target = get_node_by_ref((yyvsp[-3].node), (yyvsp[-1].labelref)); + +@@ -1562,100 +1582,100 @@ yyreduce: + + (yyval.node) = (yyvsp[-3].node); + } +-#line 1566 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1586 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 12: +-#line 181 "dtc-parser.y" /* yacc.c:1646 */ ++ case 14: ++#line 197 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.node) = build_node((yyvsp[-3].proplist), (yyvsp[-2].nodelist)); + } +-#line 1574 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1594 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 13: +-#line 188 "dtc-parser.y" /* yacc.c:1646 */ ++ case 15: ++#line 204 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.proplist) = NULL; + } +-#line 1582 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1602 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 14: +-#line 192 "dtc-parser.y" /* yacc.c:1646 */ ++ case 16: ++#line 208 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.proplist) = chain_property((yyvsp[0].prop), (yyvsp[-1].proplist)); + } +-#line 1590 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1610 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 15: +-#line 199 "dtc-parser.y" /* yacc.c:1646 */ ++ case 17: ++#line 215 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.prop) = build_property((yyvsp[-3].propnodename), (yyvsp[-1].data)); + } +-#line 1598 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1618 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 16: +-#line 203 "dtc-parser.y" /* yacc.c:1646 */ ++ case 18: ++#line 219 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.prop) = build_property((yyvsp[-1].propnodename), empty_data); + } +-#line 1606 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1626 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 17: +-#line 207 "dtc-parser.y" /* yacc.c:1646 */ ++ case 19: ++#line 223 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.prop) = build_property_delete((yyvsp[-1].propnodename)); + } +-#line 1614 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1634 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 18: +-#line 211 "dtc-parser.y" /* yacc.c:1646 */ ++ case 20: ++#line 227 "dtc-parser.y" /* yacc.c:1646 */ + { + add_label(&(yyvsp[0].prop)->labels, (yyvsp[-1].labelref)); + (yyval.prop) = (yyvsp[0].prop); + } +-#line 1623 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1643 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 19: +-#line 219 "dtc-parser.y" /* yacc.c:1646 */ ++ case 21: ++#line 235 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_merge((yyvsp[-1].data), (yyvsp[0].data)); + } +-#line 1631 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1651 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 20: +-#line 223 "dtc-parser.y" /* yacc.c:1646 */ ++ case 22: ++#line 239 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_merge((yyvsp[-2].data), (yyvsp[-1].array).data); + } +-#line 1639 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1659 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 21: +-#line 227 "dtc-parser.y" /* yacc.c:1646 */ ++ case 23: ++#line 243 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_merge((yyvsp[-3].data), (yyvsp[-1].data)); + } +-#line 1647 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1667 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 22: +-#line 231 "dtc-parser.y" /* yacc.c:1646 */ ++ case 24: ++#line 247 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_add_marker((yyvsp[-1].data), REF_PATH, (yyvsp[0].labelref)); + } +-#line 1655 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1675 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 23: +-#line 235 "dtc-parser.y" /* yacc.c:1646 */ ++ case 25: ++#line 251 "dtc-parser.y" /* yacc.c:1646 */ + { + FILE *f = srcfile_relative_open((yyvsp[-5].data).val, NULL); + struct data d; +@@ -1671,11 +1691,11 @@ yyreduce: + (yyval.data) = data_merge((yyvsp[-8].data), d); + fclose(f); + } +-#line 1675 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1695 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 24: +-#line 251 "dtc-parser.y" /* yacc.c:1646 */ ++ case 26: ++#line 267 "dtc-parser.y" /* yacc.c:1646 */ + { + FILE *f = srcfile_relative_open((yyvsp[-1].data).val, NULL); + struct data d = empty_data; +@@ -1685,43 +1705,43 @@ yyreduce: + (yyval.data) = data_merge((yyvsp[-4].data), d); + fclose(f); + } +-#line 1689 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1709 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 25: +-#line 261 "dtc-parser.y" /* yacc.c:1646 */ ++ case 27: ++#line 277 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref)); + } +-#line 1697 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1717 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 26: +-#line 268 "dtc-parser.y" /* yacc.c:1646 */ ++ case 28: ++#line 284 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = empty_data; + } +-#line 1705 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1725 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 27: +-#line 272 "dtc-parser.y" /* yacc.c:1646 */ ++ case 29: ++#line 288 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = (yyvsp[-1].data); + } +-#line 1713 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1733 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 28: +-#line 276 "dtc-parser.y" /* yacc.c:1646 */ ++ case 30: ++#line 292 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref)); + } +-#line 1721 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1741 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 29: +-#line 283 "dtc-parser.y" /* yacc.c:1646 */ ++ case 31: ++#line 299 "dtc-parser.y" /* yacc.c:1646 */ + { + unsigned long long bits; + +@@ -1737,20 +1757,20 @@ yyreduce: + (yyval.array).data = empty_data; + (yyval.array).bits = bits; + } +-#line 1741 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1761 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 30: +-#line 299 "dtc-parser.y" /* yacc.c:1646 */ ++ case 32: ++#line 315 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.array).data = empty_data; + (yyval.array).bits = 32; + } +-#line 1750 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1770 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 31: +-#line 304 "dtc-parser.y" /* yacc.c:1646 */ ++ case 33: ++#line 320 "dtc-parser.y" /* yacc.c:1646 */ + { + if ((yyvsp[-1].array).bits < 64) { + uint64_t mask = (1ULL << (yyvsp[-1].array).bits) - 1; +@@ -1769,11 +1789,11 @@ yyreduce: + + (yyval.array).data = data_append_integer((yyvsp[-1].array).data, (yyvsp[0].integer), (yyvsp[-1].array).bits); + } +-#line 1773 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1793 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 32: +-#line 323 "dtc-parser.y" /* yacc.c:1646 */ ++ case 34: ++#line 339 "dtc-parser.y" /* yacc.c:1646 */ + { + uint64_t val = ~0ULL >> (64 - (yyvsp[-1].array).bits); + +@@ -1787,247 +1807,233 @@ yyreduce: + + (yyval.array).data = data_append_integer((yyvsp[-1].array).data, val, (yyvsp[-1].array).bits); + } +-#line 1791 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1811 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 33: +-#line 337 "dtc-parser.y" /* yacc.c:1646 */ ++ case 35: ++#line 353 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.array).data = data_add_marker((yyvsp[-1].array).data, LABEL, (yyvsp[0].labelref)); + } +-#line 1799 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1819 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 36: +-#line 346 "dtc-parser.y" /* yacc.c:1646 */ ++ case 38: ++#line 362 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.integer) = (yyvsp[-1].integer); + } +-#line 1807 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1827 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 39: +-#line 357 "dtc-parser.y" /* yacc.c:1646 */ ++ case 41: ++#line 373 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-4].integer) ? (yyvsp[-2].integer) : (yyvsp[0].integer); } +-#line 1813 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1833 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 41: +-#line 362 "dtc-parser.y" /* yacc.c:1646 */ ++ case 43: ++#line 378 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) || (yyvsp[0].integer); } +-#line 1819 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1839 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 43: +-#line 367 "dtc-parser.y" /* yacc.c:1646 */ ++ case 45: ++#line 383 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) && (yyvsp[0].integer); } +-#line 1825 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1845 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 45: +-#line 372 "dtc-parser.y" /* yacc.c:1646 */ ++ case 47: ++#line 388 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) | (yyvsp[0].integer); } +-#line 1831 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1851 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 47: +-#line 377 "dtc-parser.y" /* yacc.c:1646 */ ++ case 49: ++#line 393 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) ^ (yyvsp[0].integer); } +-#line 1837 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1857 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 49: +-#line 382 "dtc-parser.y" /* yacc.c:1646 */ ++ case 51: ++#line 398 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) & (yyvsp[0].integer); } +-#line 1843 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1863 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 51: +-#line 387 "dtc-parser.y" /* yacc.c:1646 */ ++ case 53: ++#line 403 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) == (yyvsp[0].integer); } +-#line 1849 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1869 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 52: +-#line 388 "dtc-parser.y" /* yacc.c:1646 */ ++ case 54: ++#line 404 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) != (yyvsp[0].integer); } +-#line 1855 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1875 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 54: +-#line 393 "dtc-parser.y" /* yacc.c:1646 */ ++ case 56: ++#line 409 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) < (yyvsp[0].integer); } +-#line 1861 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1881 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 55: +-#line 394 "dtc-parser.y" /* yacc.c:1646 */ ++ case 57: ++#line 410 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) > (yyvsp[0].integer); } +-#line 1867 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1887 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 56: +-#line 395 "dtc-parser.y" /* yacc.c:1646 */ ++ case 58: ++#line 411 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) <= (yyvsp[0].integer); } +-#line 1873 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1893 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 57: +-#line 396 "dtc-parser.y" /* yacc.c:1646 */ ++ case 59: ++#line 412 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) >= (yyvsp[0].integer); } +-#line 1879 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1899 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 58: +-#line 400 "dtc-parser.y" /* yacc.c:1646 */ ++ case 60: ++#line 416 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) << (yyvsp[0].integer); } +-#line 1885 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1905 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 59: +-#line 401 "dtc-parser.y" /* yacc.c:1646 */ ++ case 61: ++#line 417 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) >> (yyvsp[0].integer); } +-#line 1891 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1911 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 61: +-#line 406 "dtc-parser.y" /* yacc.c:1646 */ ++ case 63: ++#line 422 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) + (yyvsp[0].integer); } +-#line 1897 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1917 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 62: +-#line 407 "dtc-parser.y" /* yacc.c:1646 */ ++ case 64: ++#line 423 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) - (yyvsp[0].integer); } +-#line 1903 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1923 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 64: +-#line 412 "dtc-parser.y" /* yacc.c:1646 */ ++ case 66: ++#line 428 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) * (yyvsp[0].integer); } +-#line 1909 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1929 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 65: +-#line 414 "dtc-parser.y" /* yacc.c:1646 */ +- { +- if ((yyvsp[0].integer) != 0) { +- (yyval.integer) = (yyvsp[-2].integer) / (yyvsp[0].integer); +- } else { +- ERROR(&(yyloc), "Division by zero"); +- (yyval.integer) = 0; +- } +- } +-#line 1922 "dtc-parser.tab.c" /* yacc.c:1646 */ ++ case 67: ++#line 429 "dtc-parser.y" /* yacc.c:1646 */ ++ { (yyval.integer) = (yyvsp[-2].integer) / (yyvsp[0].integer); } ++#line 1935 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 66: +-#line 423 "dtc-parser.y" /* yacc.c:1646 */ +- { +- if ((yyvsp[0].integer) != 0) { +- (yyval.integer) = (yyvsp[-2].integer) % (yyvsp[0].integer); +- } else { +- ERROR(&(yyloc), "Division by zero"); +- (yyval.integer) = 0; +- } +- } +-#line 1935 "dtc-parser.tab.c" /* yacc.c:1646 */ ++ case 68: ++#line 430 "dtc-parser.y" /* yacc.c:1646 */ ++ { (yyval.integer) = (yyvsp[-2].integer) % (yyvsp[0].integer); } ++#line 1941 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 69: ++ case 71: + #line 436 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = -(yyvsp[0].integer); } +-#line 1941 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1947 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 70: ++ case 72: + #line 437 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = ~(yyvsp[0].integer); } +-#line 1947 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1953 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 71: ++ case 73: + #line 438 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = !(yyvsp[0].integer); } +-#line 1953 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1959 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 72: ++ case 74: + #line 443 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = empty_data; + } +-#line 1961 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1967 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 73: ++ case 75: + #line 447 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_append_byte((yyvsp[-1].data), (yyvsp[0].byte)); + } +-#line 1969 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1975 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 74: ++ case 76: + #line 451 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref)); + } +-#line 1977 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1983 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 75: ++ case 77: + #line 458 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.nodelist) = NULL; + } +-#line 1985 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1991 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 76: ++ case 78: + #line 462 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.nodelist) = chain_node((yyvsp[-1].node), (yyvsp[0].nodelist)); + } +-#line 1993 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 1999 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 77: ++ case 79: + #line 466 "dtc-parser.y" /* yacc.c:1646 */ + { + ERROR(&(yylsp[0]), "Properties must precede subnodes"); + YYERROR; + } +-#line 2002 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 2008 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 78: ++ case 80: + #line 474 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.node) = name_node((yyvsp[0].node), (yyvsp[-1].propnodename)); + } +-#line 2010 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 2016 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 79: ++ case 81: + #line 478 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.node) = name_node(build_node_delete(), (yyvsp[-1].propnodename)); + } +-#line 2018 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 2024 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + +- case 80: ++ case 82: + #line 482 "dtc-parser.y" /* yacc.c:1646 */ + { + add_label(&(yyvsp[0].node)->labels, (yyvsp[-1].labelref)); + (yyval.node) = (yyvsp[0].node); + } +-#line 2027 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 2033 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + + +-#line 2031 "dtc-parser.tab.c" /* yacc.c:1646 */ ++#line 2037 "dtc-parser.tab.c" /* yacc.c:1646 */ + default: break; + } + /* User semantic actions sometimes alter yychar, and that requires +--- a/scripts/dtc/dtc-parser.tab.h_shipped ++++ b/scripts/dtc/dtc-parser.tab.h_shipped +@@ -46,26 +46,27 @@ extern int yydebug; + enum yytokentype + { + DT_V1 = 258, +- DT_MEMRESERVE = 259, +- DT_LSHIFT = 260, +- DT_RSHIFT = 261, +- DT_LE = 262, +- DT_GE = 263, +- DT_EQ = 264, +- DT_NE = 265, +- DT_AND = 266, +- DT_OR = 267, +- DT_BITS = 268, +- DT_DEL_PROP = 269, +- DT_DEL_NODE = 270, +- DT_PROPNODENAME = 271, +- DT_LITERAL = 272, +- DT_CHAR_LITERAL = 273, +- DT_BYTE = 274, +- DT_STRING = 275, +- DT_LABEL = 276, +- DT_REF = 277, +- DT_INCBIN = 278 ++ DT_PLUGIN = 259, ++ DT_MEMRESERVE = 260, ++ DT_LSHIFT = 261, ++ DT_RSHIFT = 262, ++ DT_LE = 263, ++ DT_GE = 264, ++ DT_EQ = 265, ++ DT_NE = 266, ++ DT_AND = 267, ++ DT_OR = 268, ++ DT_BITS = 269, ++ DT_DEL_PROP = 270, ++ DT_DEL_NODE = 271, ++ DT_PROPNODENAME = 272, ++ DT_LITERAL = 273, ++ DT_CHAR_LITERAL = 274, ++ DT_BYTE = 275, ++ DT_STRING = 276, ++ DT_LABEL = 277, ++ DT_REF = 278, ++ DT_INCBIN = 279 + }; + #endif + +@@ -74,7 +75,7 @@ extern int yydebug; + typedef union YYSTYPE YYSTYPE; + union YYSTYPE + { +-#line 38 "dtc-parser.y" /* yacc.c:1909 */ ++#line 39 "dtc-parser.y" /* yacc.c:1909 */ + + char *propnodename; + char *labelref; +@@ -92,8 +93,9 @@ union YYSTYPE + struct node *nodelist; + struct reserve_info *re; + uint64_t integer; ++ bool is_plugin; + +-#line 97 "dtc-parser.tab.h" /* yacc.c:1909 */ ++#line 99 "dtc-parser.tab.h" /* yacc.c:1909 */ + }; + # define YYSTYPE_IS_TRIVIAL 1 + # define YYSTYPE_IS_DECLARED 1 +--- a/scripts/dtc/dtc-parser.y ++++ b/scripts/dtc/dtc-parser.y +@@ -19,6 +19,7 @@ + */ + %{ + #include ++#include + + #include "dtc.h" + #include "srcpos.h" +@@ -52,9 +53,11 @@ extern bool treesource_error; + struct node *nodelist; + struct reserve_info *re; + uint64_t integer; ++ bool is_plugin; + } + + %token DT_V1 ++%token DT_PLUGIN + %token DT_MEMRESERVE + %token DT_LSHIFT DT_RSHIFT DT_LE DT_GE DT_EQ DT_NE DT_AND DT_OR + %token DT_BITS +@@ -71,6 +74,7 @@ extern bool treesource_error; + + %type propdata + %type propdataprefix ++%type plugindecl + %type memreserve + %type memreserves + %type arrayprefix +@@ -101,10 +105,22 @@ extern bool treesource_error; + %% + + sourcefile: +- DT_V1 ';' memreserves devicetree ++ DT_V1 ';' plugindecl memreserves devicetree + { +- the_boot_info = build_boot_info($3, $4, +- guess_boot_cpuid($4)); ++ $5->is_plugin = $3; ++ the_boot_info = build_boot_info($4, $5, ++ guess_boot_cpuid($5)); ++ } ++ ; ++ ++plugindecl: ++ /* empty */ ++ { ++ $$ = false; ++ } ++ | DT_PLUGIN ';' ++ { ++ $$ = true; + } + ; + +--- a/scripts/dtc/dtc.c ++++ b/scripts/dtc/dtc.c +@@ -31,6 +31,7 @@ int reservenum; /* Number of memory res + int minsize; /* Minimum blob size */ + int padsize; /* Additional padding to blob */ + int phandle_format = PHANDLE_BOTH; /* Use linux,phandle or phandle properties */ ++int symbol_fixup_support = 0; + + static void fill_fullpaths(struct node *tree, const char *prefix) + { +@@ -53,7 +54,7 @@ static void fill_fullpaths(struct node * + #define FDT_VERSION(version) _FDT_VERSION(version) + #define _FDT_VERSION(version) #version + static const char usage_synopsis[] = "dtc [options] "; +-static const char usage_short_opts[] = "qI:O:o:V:d:R:S:p:fb:i:H:sW:E:hv"; ++static const char usage_short_opts[] = "qI:O:o:V:d:R:S:p:fb:i:H:sW:E:@hv"; + static struct option const usage_long_opts[] = { + {"quiet", no_argument, NULL, 'q'}, + {"in-format", a_argument, NULL, 'I'}, +@@ -71,6 +72,7 @@ static struct option const usage_long_op + {"phandle", a_argument, NULL, 'H'}, + {"warning", a_argument, NULL, 'W'}, + {"error", a_argument, NULL, 'E'}, ++ {"symbols", no_argument, NULL, '@'}, + {"help", no_argument, NULL, 'h'}, + {"version", no_argument, NULL, 'v'}, + {NULL, no_argument, NULL, 0x0}, +@@ -101,6 +103,7 @@ static const char * const usage_opts_hel + "\t\tboth - Both \"linux,phandle\" and \"phandle\" properties", + "\n\tEnable/disable warnings (prefix with \"no-\")", + "\n\tEnable/disable errors (prefix with \"no-\")", ++ "\n\tEnable symbols/fixup support", + "\n\tPrint this help and exit", + "\n\tPrint version and exit", + NULL, +@@ -233,7 +236,9 @@ int main(int argc, char *argv[]) + case 'E': + parse_checks_option(false, true, optarg); + break; +- ++ case '@': ++ symbol_fixup_support = 1; ++ break; + case 'h': + usage(NULL); + default: +--- a/scripts/dtc/dtc.h ++++ b/scripts/dtc/dtc.h +@@ -54,6 +54,7 @@ extern int reservenum; /* Number of mem + extern int minsize; /* Minimum blob size */ + extern int padsize; /* Additional padding to blob */ + extern int phandle_format; /* Use linux,phandle or phandle properties */ ++extern int symbol_fixup_support;/* enable symbols & fixup support */ + + #define PHANDLE_LEGACY 0x1 + #define PHANDLE_EPAPR 0x2 +@@ -132,6 +133,26 @@ struct label { + struct label *next; + }; + ++struct fixup_entry { ++ int offset; ++ struct node *node; ++ struct property *prop; ++ struct fixup_entry *next; ++ bool local_fixup_generated; ++}; ++ ++struct fixup { ++ char *ref; ++ struct fixup_entry *entries; ++ struct fixup *next; ++}; ++ ++struct symbol { ++ struct label *label; ++ struct node *node; ++ struct symbol *next; ++}; ++ + struct property { + bool deleted; + char *name; +@@ -158,6 +179,13 @@ struct node { + int addr_cells, size_cells; + + struct label *labels; ++ ++ struct symbol *symbols; ++ struct fixup_entry *local_fixups; ++ bool emit_local_fixup_node; ++ ++ bool is_plugin; ++ struct fixup *fixups; + }; + + #define for_each_label_withdel(l0, l) \ +@@ -181,6 +209,18 @@ struct node { + for_each_child_withdel(n, c) \ + if (!(c)->deleted) + ++#define for_each_fixup(n, f) \ ++ for ((f) = (n)->fixups; (f); (f) = (f)->next) ++ ++#define for_each_fixup_entry(f, fe) \ ++ for ((fe) = (f)->entries; (fe); (fe) = (fe)->next) ++ ++#define for_each_symbol(n, s) \ ++ for ((s) = (n)->symbols; (s); (s) = (s)->next) ++ ++#define for_each_local_fixup_entry(n, fe) \ ++ for ((fe) = (n)->local_fixups; (fe); (fe) = (fe)->next) ++ + void add_label(struct label **labels, char *label); + void delete_labels(struct label **labels); + +--- a/scripts/dtc/flattree.c ++++ b/scripts/dtc/flattree.c +@@ -255,6 +255,204 @@ static int stringtable_insert(struct dat + return i; + } + ++static void emit_local_fixups(struct node *tree, struct emitter *emit, ++ void *etarget, struct data *strbuf, struct version_info *vi, ++ struct node *node) ++{ ++ struct fixup_entry *fe, *fen; ++ struct node *child; ++ int nameoff, count; ++ cell_t *buf; ++ struct data d; ++ ++ if (node->emit_local_fixup_node) { ++ ++ /* emit the external fixups (do not emit /) */ ++ if (node != tree) { ++ emit->beginnode(etarget, NULL); ++ emit->string(etarget, node->name, 0); ++ emit->align(etarget, sizeof(cell_t)); ++ } ++ ++ for_each_local_fixup_entry(tree, fe) { ++ if (fe->node != node || fe->local_fixup_generated) ++ continue; ++ ++ /* count the number of fixup entries */ ++ count = 0; ++ for_each_local_fixup_entry(tree, fen) { ++ if (fen->prop != fe->prop) ++ continue; ++ fen->local_fixup_generated = true; ++ count++; ++ } ++ ++ /* allocate buffer */ ++ buf = xmalloc(count * sizeof(cell_t)); ++ ++ /* collect all the offsets in buffer */ ++ count = 0; ++ for_each_local_fixup_entry(tree, fen) { ++ if (fen->prop != fe->prop) ++ continue; ++ fen->local_fixup_generated = true; ++ buf[count++] = cpu_to_fdt32(fen->offset); ++ } ++ d = empty_data; ++ d.len = count * sizeof(cell_t); ++ d.val = (char *)buf; ++ ++ nameoff = stringtable_insert(strbuf, fe->prop->name); ++ emit->property(etarget, fe->prop->labels); ++ emit->cell(etarget, count * sizeof(cell_t)); ++ emit->cell(etarget, nameoff); ++ ++ if ((vi->flags & FTF_VARALIGN) && ++ (count * sizeof(cell_t)) >= 8) ++ emit->align(etarget, 8); ++ ++ emit->data(etarget, d); ++ emit->align(etarget, sizeof(cell_t)); ++ ++ free(buf); ++ } ++ } ++ ++ for_each_child(node, child) ++ emit_local_fixups(tree, emit, etarget, strbuf, vi, child); ++ ++ if (node->emit_local_fixup_node && node != tree) ++ emit->endnode(etarget, tree->labels); ++} ++ ++static void emit_symbols_node(struct node *tree, struct emitter *emit, ++ void *etarget, struct data *strbuf, ++ struct version_info *vi) ++{ ++ struct symbol *sym; ++ int nameoff, vallen; ++ ++ /* do nothing if no symbols */ ++ if (!tree->symbols) ++ return; ++ ++ emit->beginnode(etarget, NULL); ++ emit->string(etarget, "__symbols__", 0); ++ emit->align(etarget, sizeof(cell_t)); ++ ++ for_each_symbol(tree, sym) { ++ ++ vallen = strlen(sym->node->fullpath); ++ ++ nameoff = stringtable_insert(strbuf, sym->label->label); ++ ++ emit->property(etarget, NULL); ++ emit->cell(etarget, vallen + 1); ++ emit->cell(etarget, nameoff); ++ ++ if ((vi->flags & FTF_VARALIGN) && vallen >= 8) ++ emit->align(etarget, 8); ++ ++ emit->string(etarget, sym->node->fullpath, ++ strlen(sym->node->fullpath)); ++ emit->align(etarget, sizeof(cell_t)); ++ } ++ ++ emit->endnode(etarget, NULL); ++} ++ ++static void emit_local_fixups_node(struct node *tree, struct emitter *emit, ++ void *etarget, struct data *strbuf, ++ struct version_info *vi) ++{ ++ struct fixup_entry *fe; ++ struct node *node; ++ ++ /* do nothing if no local fixups */ ++ if (!tree->local_fixups) ++ return; ++ ++ /* mark all nodes that need a local fixup generated (and parents) */ ++ for_each_local_fixup_entry(tree, fe) { ++ node = fe->node; ++ while (node != NULL && !node->emit_local_fixup_node) { ++ node->emit_local_fixup_node = true; ++ node = node->parent; ++ } ++ } ++ ++ /* emit the local fixups node now */ ++ emit->beginnode(etarget, NULL); ++ emit->string(etarget, "__local_fixups__", 0); ++ emit->align(etarget, sizeof(cell_t)); ++ ++ emit_local_fixups(tree, emit, etarget, strbuf, vi, tree); ++ ++ emit->endnode(etarget, tree->labels); ++} ++ ++static void emit_fixups_node(struct node *tree, struct emitter *emit, ++ void *etarget, struct data *strbuf, ++ struct version_info *vi) ++{ ++ struct fixup *f; ++ struct fixup_entry *fe; ++ char *name, *s; ++ const char *fullpath; ++ int namesz, nameoff, vallen; ++ ++ /* do nothing if no fixups */ ++ if (!tree->fixups) ++ return; ++ ++ /* emit the external fixups */ ++ emit->beginnode(etarget, NULL); ++ emit->string(etarget, "__fixups__", 0); ++ emit->align(etarget, sizeof(cell_t)); ++ ++ for_each_fixup(tree, f) { ++ ++ namesz = 0; ++ for_each_fixup_entry(f, fe) { ++ fullpath = fe->node->fullpath; ++ if (fullpath[0] == '\0') ++ fullpath = "/"; ++ namesz += strlen(fullpath) + 1; ++ namesz += strlen(fe->prop->name) + 1; ++ namesz += 32; /* space for : + '\0' */ ++ } ++ ++ name = xmalloc(namesz); ++ ++ s = name; ++ for_each_fixup_entry(f, fe) { ++ fullpath = fe->node->fullpath; ++ if (fullpath[0] == '\0') ++ fullpath = "/"; ++ snprintf(s, name + namesz - s, "%s:%s:%d", fullpath, ++ fe->prop->name, fe->offset); ++ s += strlen(s) + 1; ++ } ++ ++ nameoff = stringtable_insert(strbuf, f->ref); ++ vallen = s - name - 1; ++ ++ emit->property(etarget, NULL); ++ emit->cell(etarget, vallen + 1); ++ emit->cell(etarget, nameoff); ++ ++ if ((vi->flags & FTF_VARALIGN) && vallen >= 8) ++ emit->align(etarget, 8); ++ ++ emit->string(etarget, name, vallen); ++ emit->align(etarget, sizeof(cell_t)); ++ ++ free(name); ++ } ++ ++ emit->endnode(etarget, tree->labels); ++} ++ + static void flatten_tree(struct node *tree, struct emitter *emit, + void *etarget, struct data *strbuf, + struct version_info *vi) +@@ -310,6 +508,10 @@ static void flatten_tree(struct node *tr + flatten_tree(child, emit, etarget, strbuf, vi); + } + ++ emit_symbols_node(tree, emit, etarget, strbuf, vi); ++ emit_local_fixups_node(tree, emit, etarget, strbuf, vi); ++ emit_fixups_node(tree, emit, etarget, strbuf, vi); ++ + emit->endnode(etarget, tree->labels); + } + +--- a/scripts/dtc/version_gen.h ++++ b/scripts/dtc/version_gen.h +@@ -1 +1 @@ +-#define DTC_VERSION "DTC 1.4.1-g53bf130b" ++#define DTC_VERSION "DTC 1.4.1-g25efc119" diff --git a/target/linux/brcm2708/patches-4.9/950-0054-BCM2708-Add-core-Device-Tree-support.patch b/target/linux/brcm2708/patches-4.9/950-0054-BCM2708-Add-core-Device-Tree-support.patch new file mode 100644 index 000000000000..d9d1fa9a5856 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0054-BCM2708-Add-core-Device-Tree-support.patch @@ -0,0 +1,9790 @@ +From 589cd87acedc0e24214934816b6c16b4e76a894d Mon Sep 17 00:00:00 2001 +From: notro +Date: Wed, 9 Jul 2014 14:46:08 +0200 +Subject: [PATCH] BCM2708: Add core Device Tree support +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add the bare minimum needed to boot BCM2708 from a Device Tree. + +Signed-off-by: Noralf Tronnes + +BCM2708: DT: change 'axi' nodename to 'soc' + +Change DT node named 'axi' to 'soc' so it matches ARCH_BCM2835. +The VC4 bootloader fills in certain properties in the 'axi' subtree, +but since this is part of an upstreaming effort, the name is changed. + +Signed-off-by: Noralf Tronnes notro@tronnes.org + +BCM2708_DT: Correct length of the peripheral space + +Use dts-dirs feature for overlays. + +The kernel makefiles have a dts-dirs target that is for vendor subdirectories. + +Using this fixes the install_dtbs target, which previously did not install the overlays. + +BCM270X_DT: configure I2S DMA channels + +Signed-off-by: Matthias Reichl + +BCM270X_DT: switch to bcm2835-i2s + +I2S soundcard drivers with proper devicetree support (i.e. not linking +to the cpu_dai/platform via name but to cpu/platform via of_node) +will work out of the box without any modifications. + +When the kernel is compiled without devicetree support the platform +code will instantiate the bcm2708-i2s driver and I2S soundcard drivers +will link to it via name, as before. + +Signed-off-by: Matthias Reichl + +SDIO-overlay: add poll_once-boolean parameter + +Add paramter to toggle sdio-device-polling +done every second or once at boot-time. + +Signed-off-by: Patrick Boettcher + +BCM270X_DT: Make mmc overlay compatible with current firmware + +The original DT overlay logic followed a merge-then-patch procedure, +i.e. parameters are applied to the loaded overlay before the overlay +is merged into the base DTB. This sequence has been changed to +patch-then-merge, in order to support parameterised node names, and +to protect against bad overlays. As a result, overrides (parameters) +must only target labels in the overlay, but the overlay can obviously target nodes in the base DTB. + +mmc-overlay.dts (that switches back to the original mmc sdcard +driver) is the only overlay violating that rule, and this patch +fixes it. + +bcm270x_dt: Use the sdhost MMC controller by default + +The "mmc" overlay reverts to using the other controller. + +squash: Add cprman to dt + +BCM270X_DT: Use clk_core for I2C interfaces + +BCM270X_DT: Use bcm283x.dtsi, bcm2835.dtsi and bcm2836.dtsi + +The mainline Device Tree files are quite close to downstream now. +Let's use bcm283x.dtsi, bcm2835.dtsi and bcm2836.dtsi as base files +for our dts files. + +Mainline dts files are based on these files: + + bcm2835-rpi.dtsi + bcm2835.dtsi bcm2836.dtsi + bcm283x.dtsi + +Current downstream are based on these: + + bcm2708.dtsi bcm2709.dtsi bcm2710.dtsi + bcm2708_common.dtsi + +This patch introduces this dependency: + + bcm2708.dtsi bcm2709.dtsi + bcm2708-rpi.dtsi + bcm270x.dtsi + bcm2835.dtsi bcm2836.dtsi + bcm283x.dtsi + +And: + bcm2710.dtsi + bcm2708-rpi.dtsi + bcm270x.dtsi + bcm283x.dtsi + +bcm270x.dtsi contains the downstream bcm283x.dtsi diff. +bcm2708-rpi.dtsi is the downstream version of bcm2835-rpi.dtsi. + +Other changes: +- The led node has moved from /soc/leds to /leds. This is not a problem + since the label is used to reference it. +- The clk_osc reg property changes from 6 to 3. +- The gpu nodes has their interrupt property set in the base file. +- the clocks label does not point to the /clocks node anymore, but + points to the cprman node. This is not a problem since the overlays + that use the clock node refer to it directly: target-path = "/clocks"; +- some nodes now have 2 labels since mainline and downstream differs in + this respect: cprman/clocks, spi0/spi, gpu/vc4. +- some nodes doesn't have an explicit status = "okay" since they're not + disabled in the base file: watchdog and random. +- gpiomem doesn't need an explicit status = "okay". +- bcm2708-rpi-cm.dts got the hpd-gpios property from bcm2708_common.dtsi, + it's now set directly in that file. +- bcm2709-rpi-2-b.dts has the timer node moved from /soc/timer to /timer. +- Removed clock-frequency property on the bcm{2709,2710}.dtsi timer nodes. + +Signed-off-by: Noralf Trønnes + +BCM270X_DT: Use raspberrypi-power to turn on USB power + +Use the raspberrypi-power driver to turn on USB power. + +Signed-off-by: Noralf Trønnes + +BCM270X_DT: Add a .dtbo target, use for overlays + +Change the filenames and extensions to keep the pre-DDT style of +overlay (-overlay.dtb) distinct from new ones that use a +different style of local fixups (.dtbo), and to match other +platforms. + +The RPi firmware uses the DDTK trailer atom to choose which type of +overlay to use for each kernel. + +Signed-off-by: Phil Elwell + +BCM270X_DT: Don't generate "linux,phandle" props + +The EPAPR standard says to use "phandle" properties to store phandles, +rather than the deprecated "linux,phandle" version. By default, dtc +generates both, but adding "-H epapr" causes it to only generate +"phandle"s, saving some space and clutter. + +Signed-off-by: Phil Elwell + +BCM270X_DT: Add overlay for enc28j60 on SPI2 + +Works on SPI2 for compute module + +BCM270X_DT: Add midi-uart0 overlay + +MIDI requires 31.25kbaud, a baudrate unsupported by Linux. The +midi-uart0 overlay configures uart0 (ttyAMA0) to use a fake clock +so that requesting 38.4kbaud actually gets 31.25kbaud. + +Signed-off-by: Phil Elwell + +BCM270X_DT: Add i2c-sensor overlay + +The i2c-sensor overlay is a container for various pressure and +temperature sensors, currently bmp085 and bmp280. The standalone +bmp085_i2c-sensor overlay is now deprecated. + +Signed-off-by: Phil Elwell + +BCM270X_DT: overlays/*-overlay.dtb -> overlays/*.dtbo (#1752) + +We now create overlays as .dtbo files. + +build: support for .dtbo files for dtb overlays + +Kernel 4.4.6+ on RaspberryPi support .dtbo files for overlays, instead of .dtb. +Patch the kernel, which has faulty rules to generate .dtbo the way yocto does + +Signed-off-by: Herve Jourdain +Signed-off-by: Khem Raj +--- + arch/arm/Makefile | 2 + + arch/arm/boot/.gitignore | 2 +- + arch/arm/boot/dts/Makefile | 19 + + arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 156 +++ + arch/arm/boot/dts/bcm2708-rpi-b.dts | 146 +++ + arch/arm/boot/dts/bcm2708-rpi-cm.dts | 105 ++ + arch/arm/boot/dts/bcm2708-rpi-cm.dtsi | 50 + + arch/arm/boot/dts/bcm2708-rpi.dtsi | 109 ++ + arch/arm/boot/dts/bcm2708.dtsi | 16 + + arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 156 +++ + arch/arm/boot/dts/bcm2709.dtsi | 22 + + arch/arm/boot/dts/bcm270x.dtsi | 141 ++ + arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 203 +++ + arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 155 +++ + arch/arm/boot/dts/bcm2710.dtsi | 155 +++ + arch/arm/boot/dts/overlays/Makefile | 105 ++ + arch/arm/boot/dts/overlays/README | 1368 ++++++++++++++++++++ + .../arm/boot/dts/overlays/adau1977-adc-overlay.dts | 53 + + arch/arm/boot/dts/overlays/ads1015-overlay.dts | 98 ++ + arch/arm/boot/dts/overlays/ads7846-overlay.dts | 89 ++ + .../dts/overlays/akkordion-iqdacplus-overlay.dts | 46 + + .../allo-piano-dac-pcm512x-audio-overlay.dts | 54 + + arch/arm/boot/dts/overlays/at86rf233-overlay.dts | 57 + + .../audioinjector-wm8731-audio-overlay.dts | 39 + + arch/arm/boot/dts/overlays/audremap-overlay.dts | 19 + + .../dts/overlays/bmp085_i2c-sensor-overlay.dts | 23 + + arch/arm/boot/dts/overlays/dht11-overlay.dts | 39 + + .../boot/dts/overlays/dionaudio-loco-overlay.dts | 39 + + arch/arm/boot/dts/overlays/dpi18-overlay.dts | 31 + + arch/arm/boot/dts/overlays/dpi24-overlay.dts | 31 + + arch/arm/boot/dts/overlays/dwc-otg-overlay.dts | 20 + + arch/arm/boot/dts/overlays/dwc2-overlay.dts | 29 + + arch/arm/boot/dts/overlays/enc28j60-overlay.dts | 53 + + .../boot/dts/overlays/enc28j60-spi2-overlay.dts | 47 + + arch/arm/boot/dts/overlays/gpio-ir-overlay.dts | 44 + + .../boot/dts/overlays/gpio-poweroff-overlay.dts | 34 + + .../boot/dts/overlays/hifiberry-amp-overlay.dts | 39 + + .../boot/dts/overlays/hifiberry-dac-overlay.dts | 34 + + .../dts/overlays/hifiberry-dacplus-overlay.dts | 56 + + .../boot/dts/overlays/hifiberry-digi-overlay.dts | 39 + + .../dts/overlays/hifiberry-digi-pro-overlay.dts | 41 + + arch/arm/boot/dts/overlays/hy28a-overlay.dts | 93 ++ + arch/arm/boot/dts/overlays/hy28b-overlay.dts | 148 +++ + arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts | 13 + + arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts | 43 + + arch/arm/boot/dts/overlays/i2c-mux-overlay.dts | 139 ++ + .../boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts | 26 + + arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts | 83 ++ + arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts | 34 + + .../arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts | 61 + + .../arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts | 37 + + .../boot/dts/overlays/i2s-gpio28-31-overlay.dts | 18 + + arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts | 43 + + .../boot/dts/overlays/iqaudio-dacplus-overlay.dts | 46 + + .../overlays/iqaudio-digi-wm8804-audio-overlay.dts | 47 + + .../arm/boot/dts/overlays/justboom-dac-overlay.dts | 43 + + .../boot/dts/overlays/justboom-digi-overlay.dts | 39 + + arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts | 57 + + arch/arm/boot/dts/overlays/mcp23017-overlay.dts | 54 + + arch/arm/boot/dts/overlays/mcp23s17-overlay.dts | 732 +++++++++++ + .../arm/boot/dts/overlays/mcp2515-can0-overlay.dts | 73 ++ + .../arm/boot/dts/overlays/mcp2515-can1-overlay.dts | 73 ++ + arch/arm/boot/dts/overlays/midi-uart0-overlay.dts | 36 + + arch/arm/boot/dts/overlays/mmc-overlay.dts | 38 + + arch/arm/boot/dts/overlays/mz61581-overlay.dts | 117 ++ + arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts | 27 + + .../boot/dts/overlays/pi3-disable-bt-overlay.dts | 46 + + .../boot/dts/overlays/pi3-miniuart-bt-overlay.dts | 64 + + arch/arm/boot/dts/overlays/piscreen-overlay.dts | 102 ++ + arch/arm/boot/dts/overlays/piscreen2r-overlay.dts | 106 ++ + arch/arm/boot/dts/overlays/pisound-overlay.dts | 114 ++ + arch/arm/boot/dts/overlays/pitft22-overlay.dts | 69 + + .../dts/overlays/pitft28-capacitive-overlay.dts | 91 ++ + .../dts/overlays/pitft28-resistive-overlay.dts | 121 ++ + .../dts/overlays/pitft35-resistive-overlay.dts | 121 ++ + arch/arm/boot/dts/overlays/pps-gpio-overlay.dts | 35 + + arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts | 47 + + arch/arm/boot/dts/overlays/pwm-overlay.dts | 43 + + arch/arm/boot/dts/overlays/qca7000-overlay.dts | 52 + + arch/arm/boot/dts/overlays/raspidac3-overlay.dts | 45 + + .../boot/dts/overlays/rpi-backlight-overlay.dts | 21 + + arch/arm/boot/dts/overlays/rpi-dac-overlay.dts | 34 + + arch/arm/boot/dts/overlays/rpi-display-overlay.dts | 89 ++ + arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts | 17 + + arch/arm/boot/dts/overlays/rpi-proto-overlay.dts | 39 + + arch/arm/boot/dts/overlays/rpi-sense-overlay.dts | 47 + + .../overlays/rra-digidac1-wm8741-audio-overlay.dts | 81 ++ + .../boot/dts/overlays/sc16is750-i2c-overlay.dts | 37 + + .../boot/dts/overlays/sc16is752-spi1-overlay.dts | 61 + + arch/arm/boot/dts/overlays/sdhost-overlay.dts | 32 + + arch/arm/boot/dts/overlays/sdio-1bit-overlay.dts | 36 + + arch/arm/boot/dts/overlays/sdio-overlay.dts | 36 + + arch/arm/boot/dts/overlays/sdtweak-overlay.dts | 23 + + arch/arm/boot/dts/overlays/smi-dev-overlay.dts | 18 + + arch/arm/boot/dts/overlays/smi-nand-overlay.dts | 69 + + arch/arm/boot/dts/overlays/smi-overlay.dts | 37 + + .../boot/dts/overlays/spi-gpio35-39-overlay.dts | 31 + + arch/arm/boot/dts/overlays/spi-rtc-overlay.dts | 33 + + arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts | 26 + + arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts | 57 + + arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts | 69 + + arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts | 81 ++ + arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts | 57 + + arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts | 69 + + arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts | 81 ++ + arch/arm/boot/dts/overlays/tinylcd35-overlay.dts | 224 ++++ + arch/arm/boot/dts/overlays/uart1-overlay.dts | 38 + + .../arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts | 89 ++ + arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 136 ++ + arch/arm/boot/dts/overlays/vga666-overlay.dts | 30 + + arch/arm/boot/dts/overlays/w1-gpio-overlay.dts | 39 + + .../boot/dts/overlays/w1-gpio-pullup-overlay.dts | 41 + + arch/arm/boot/dts/overlays/wittypi-overlay.dts | 44 + + scripts/Makefile.dtbinst | 10 +- + scripts/Makefile.lib | 11 + + 115 files changed, 8979 insertions(+), 4 deletions(-) + create mode 100644 arch/arm/boot/dts/bcm2708-rpi-b-plus.dts + create mode 100644 arch/arm/boot/dts/bcm2708-rpi-b.dts + create mode 100644 arch/arm/boot/dts/bcm2708-rpi-cm.dts + create mode 100644 arch/arm/boot/dts/bcm2708-rpi-cm.dtsi + create mode 100644 arch/arm/boot/dts/bcm2708-rpi.dtsi + create mode 100644 arch/arm/boot/dts/bcm2708.dtsi + create mode 100644 arch/arm/boot/dts/bcm2709-rpi-2-b.dts + create mode 100644 arch/arm/boot/dts/bcm2709.dtsi + create mode 100644 arch/arm/boot/dts/bcm270x.dtsi + create mode 100644 arch/arm/boot/dts/bcm2710-rpi-3-b.dts + create mode 100644 arch/arm/boot/dts/bcm2710-rpi-cm3.dts + create mode 100644 arch/arm/boot/dts/bcm2710.dtsi + create mode 100644 arch/arm/boot/dts/overlays/Makefile + create mode 100644 arch/arm/boot/dts/overlays/README + create mode 100644 arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ads1015-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ads7846-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/at86rf233-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/audremap-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dht11-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dpi18-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dpi24-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dwc-otg-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dwc2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/enc28j60-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-ir-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hy28a-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hy28b-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-mux-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/justboom-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/justboom-digi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mcp23017-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mcp23s17-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/midi-uart0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mmc-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mz61581-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/piscreen-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/piscreen2r-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pisound-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pitft22-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pps-gpio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pwm-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/qca7000-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/raspidac3-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-display-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-proto-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-sense-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sdhost-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sdio-1bit-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sdio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sdtweak-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/smi-dev-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/smi-nand-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/smi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi-rtc-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/tinylcd35-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/uart1-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vga666-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/w1-gpio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/wittypi-overlay.dts + +--- a/arch/arm/Makefile ++++ b/arch/arm/Makefile +@@ -334,6 +334,8 @@ $(INSTALL_TARGETS): + + %.dtb: | scripts + $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@ ++%.dtbo: | scripts ++ $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@ + + PHONY += dtbs dtbs_install + +--- a/arch/arm/boot/.gitignore ++++ b/arch/arm/boot/.gitignore +@@ -3,4 +3,4 @@ zImage + xipImage + bootpImage + uImage +-*.dtb ++*.dtb* +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -1,5 +1,13 @@ + ifeq ($(CONFIG_OF),y) + ++dtb-$(CONFIG_ARCH_BCM2835) += \ ++ bcm2708-rpi-b.dtb \ ++ bcm2708-rpi-b-plus.dtb \ ++ bcm2708-rpi-cm.dtb \ ++ bcm2709-rpi-2-b.dtb \ ++ bcm2710-rpi-3-b.dtb \ ++ bcm2710-rpi-cm3.dtb ++ + dtb-$(CONFIG_ARCH_ALPINE) += \ + alpine-db.dtb + dtb-$(CONFIG_MACH_ARTPEC6) += \ +@@ -955,10 +963,21 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ + dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb + dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \ + aspeed-ast2500-evb.dtb ++ ++targets += dtbs dtbs_install ++targets += $(dtb-y) ++ + endif + + dtstree := $(srctree)/$(src) + dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) + + always := $(dtb-y) ++subdir-y := overlays + clean-files := *.dtb ++ ++# Enable fixups to support overlays on BCM2835 platforms ++ifeq ($(CONFIG_ARCH_BCM2835),y) ++ DTC_FLAGS ?= -@ -H epapr ++ dts-dirs += overlays ++endif +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts +@@ -0,0 +1,156 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++ ++/ { ++ model = "Raspberry Pi Model B+"; ++}; ++ ++&gpio { ++ sdhost_pins: sdhost_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 45>; ++ brcm,function = <4>; ++ }; ++}; ++ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&fb { ++ status = "okay"; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 47 0>; ++ }; ++ ++ pwr_led: pwr { ++ label = "led1"; ++ linux,default-trigger = "input"; ++ gpios = <&gpio 35 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ __overrides__ { ++ uart0 = <&uart0>,"status"; ++ uart1 = <&uart1>,"status"; ++ i2s = <&i2s>,"status"; ++ spi = <&spi0>,"status"; ++ i2c0 = <&i2c0>,"status"; ++ i2c1 = <&i2c1>,"status"; ++ i2c2_iknowwhatimdoing = <&i2c2>,"status"; ++ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; ++ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&pwr_led>,"gpios:4"; ++ pwr_led_activelow = <&pwr_led>,"gpios:8"; ++ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; ++ ++ audio = <&audio>,"status"; ++ watchdog = <&watchdog>,"status"; ++ random = <&random>,"status"; ++ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; ++ sd_force_pio = <&sdhost>,"brcm,force-pio?"; ++ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; ++ sd_debug = <&sdhost>,"brcm,debug"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts +@@ -0,0 +1,146 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++ ++/ { ++ model = "Raspberry Pi Model B"; ++}; ++ ++&gpio { ++ sdhost_pins: sdhost_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <28 29 30 31>; ++ brcm,function = <6>; /* alt2 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 45>; ++ brcm,function = <4>; ++ }; ++}; ++ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&fb { ++ status = "okay"; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 16 1>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ __overrides__ { ++ uart0 = <&uart0>,"status"; ++ uart1 = <&uart1>,"status"; ++ i2s = <&i2s>,"status"; ++ spi = <&spi0>,"status"; ++ i2c0 = <&i2c0>,"status"; ++ i2c1 = <&i2c1>,"status"; ++ i2c2_iknowwhatimdoing = <&i2c2>,"status"; ++ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; ++ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ audio = <&audio>,"status"; ++ watchdog = <&watchdog>,"status"; ++ random = <&random>,"status"; ++ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; ++ sd_force_pio = <&sdhost>,"brcm,force-pio?"; ++ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; ++ sd_debug = <&sdhost>,"brcm,debug"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts +@@ -0,0 +1,105 @@ ++/dts-v1/; ++ ++#include "bcm2708-rpi-cm.dtsi" ++ ++/ { ++ model = "Raspberry Pi Compute Module"; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&gpio { ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins; ++ brcm,function; ++ }; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; ++}; ++ ++/ { ++ __overrides__ { ++ uart0 = <&uart0>,"status"; ++ uart1 = <&uart1>,"status"; ++ i2s = <&i2s>,"status"; ++ spi = <&spi0>,"status"; ++ i2c0 = <&i2c0>,"status"; ++ i2c1 = <&i2c1>,"status"; ++ i2c2_iknowwhatimdoing = <&i2c2>,"status"; ++ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; ++ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi +@@ -0,0 +1,50 @@ ++#include "bcm2708.dtsi" ++ ++&gpio { ++ sdhost_pins: sdhost_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++}; ++ ++&gpio { ++ mmc_pins: mmc_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <7>; /* alt3 */ ++ }; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 47 0>; ++ }; ++}; ++ ++ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_pins>; ++ non-removable; ++ bus-width = <4>; ++ status = "okay"; ++ brcm,overclock-50 = <0>; ++}; ++ ++&fb { ++ status = "okay"; ++}; ++ ++/ { ++ __overrides__ { ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ audio = <&audio>,"status"; ++ watchdog = <&watchdog>,"status"; ++ random = <&random>,"status"; ++ sd_overclock = <&mmc>,"brcm,overclock-50:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi +@@ -0,0 +1,109 @@ ++/* Downstream version of bcm2835-rpi.dtsi */ ++ ++#include ++ ++/ { ++ memory { ++ device_type = "memory"; ++ reg = <0x0 0x0>; ++ }; ++ ++ aliases { ++ audio = &audio; ++ aux = &aux; ++ sound = &sound; ++ soc = &soc; ++ dma = &dma; ++ intc = &intc; ++ watchdog = &watchdog; ++ random = &random; ++ mailbox = &mailbox; ++ gpio = &gpio; ++ uart0 = &uart0; ++ sdhost = &sdhost; ++ i2s = &i2s; ++ spi0 = &spi0; ++ i2c0 = &i2c0; ++ uart1 = &uart1; ++ spi1 = &spi1; ++ spi2 = &spi2; ++ mmc = &mmc; ++ i2c1 = &i2c1; ++ i2c2 = &i2c2; ++ usb = &usb; ++ leds = &leds; ++ fb = &fb; ++ vchiq = &vchiq; ++ thermal = &thermal; ++ }; ++ ++ leds: leds { ++ compatible = "gpio-leds"; ++ }; ++ ++ soc { ++ gpiomem { ++ compatible = "brcm,bcm2835-gpiomem"; ++ reg = <0x7e200000 0x1000>; ++ }; ++ ++ firmware: firmware { ++ compatible = "raspberrypi,bcm2835-firmware"; ++ mboxes = <&mailbox>; ++ }; ++ ++ power: power { ++ compatible = "raspberrypi,bcm2835-power"; ++ firmware = <&firmware>; ++ #power-domain-cells = <1>; ++ }; ++ ++ fb: fb { ++ compatible = "brcm,bcm2708-fb"; ++ firmware = <&firmware>; ++ status = "disabled"; ++ }; ++ ++ vchiq: vchiq { ++ compatible = "brcm,bcm2835-vchiq"; ++ reg = <0x7e00b840 0xf>; ++ interrupts = <0 2>; ++ cache-line-size = <32>; ++ firmware = <&firmware>; ++ }; ++ ++ thermal: thermal { ++ compatible = "brcm,bcm2835-thermal"; ++ firmware = <&firmware>; ++ }; ++ ++ /* Onboard audio */ ++ audio: audio { ++ compatible = "brcm,bcm2835-audio"; ++ brcm,pwm-channels = <8>; ++ status = "disabled"; ++ }; ++ ++ /* External sound card */ ++ sound: sound { ++ status = "disabled"; ++ }; ++ ++ }; ++ ++ __overrides__ { ++ cache_line_size = <&vchiq>, "cache-line-size:0"; ++ }; ++}; ++ ++&dma { ++ brcm,dma-channel-mask = <0x7f34>; ++}; ++ ++&hdmi { ++ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; ++}; ++ ++&usb { ++ power-domains = <&power RPI_POWER_DOMAIN_USB>; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708.dtsi +@@ -0,0 +1,16 @@ ++#include "bcm2835.dtsi" ++#include "bcm270x.dtsi" ++#include "bcm2708-rpi.dtsi" ++ ++/ { ++ soc { ++ timer@7e003000 { ++ compatible = "brcm,bcm2835-system-timer"; ++ reg = <0x7e003000 0x1000>; ++ interrupts = <1 0>, <1 1>, <1 2>, <1 3>; ++ clock-frequency = <1000000>; ++ }; ++ }; ++ ++ /delete-node/ cpus; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts +@@ -0,0 +1,156 @@ ++/dts-v1/; ++ ++#include "bcm2709.dtsi" ++ ++/ { ++ model = "Raspberry Pi 2 Model B"; ++}; ++ ++&gpio { ++ sdhost_pins: sdhost_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 45>; ++ brcm,function = <4>; ++ }; ++}; ++ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&fb { ++ status = "okay"; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 47 0>; ++ }; ++ ++ pwr_led: pwr { ++ label = "led1"; ++ linux,default-trigger = "input"; ++ gpios = <&gpio 35 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ __overrides__ { ++ uart0 = <&uart0>,"status"; ++ uart1 = <&uart1>,"status"; ++ i2s = <&i2s>,"status"; ++ spi = <&spi0>,"status"; ++ i2c0 = <&i2c0>,"status"; ++ i2c1 = <&i2c1>,"status"; ++ i2c2_iknowwhatimdoing = <&i2c2>,"status"; ++ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; ++ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&pwr_led>,"gpios:4"; ++ pwr_led_activelow = <&pwr_led>,"gpios:8"; ++ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; ++ ++ audio = <&audio>,"status"; ++ watchdog = <&watchdog>,"status"; ++ random = <&random>,"status"; ++ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; ++ sd_force_pio = <&sdhost>,"brcm,force-pio?"; ++ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; ++ sd_debug = <&sdhost>,"brcm,debug"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2709.dtsi +@@ -0,0 +1,22 @@ ++#include "bcm2836.dtsi" ++#include "bcm270x.dtsi" ++#include "bcm2708-rpi.dtsi" ++ ++/ { ++ soc { ++ ranges = <0x7e000000 0x3f000000 0x01000000>, ++ <0x40000000 0x40000000 0x00040000>; ++ ++ syscon@40000000 { ++ compatible = "brcm,bcm2836-arm-local", "syscon"; ++ reg = <0x40000000 0x100>; ++ }; ++ }; ++ ++ __overrides__ { ++ arm_freq = <&v7_cpu0>, "clock-frequency:0", ++ <&v7_cpu1>, "clock-frequency:0", ++ <&v7_cpu2>, "clock-frequency:0", ++ <&v7_cpu3>, "clock-frequency:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm270x.dtsi +@@ -0,0 +1,141 @@ ++/* Downstream bcm283x.dtsi diff */ ++#include "dt-bindings/power/raspberrypi-power.h" ++ ++/ { ++ chosen { ++ bootargs = ""; ++ }; ++ ++ soc: soc { ++ ++ /delete-node/ timer@7e003000; ++ ++ watchdog: watchdog@7e100000 { ++ /* Add alias */ ++ }; ++ ++ cprman: cprman@7e101000 { ++ /* Add alias */ ++ }; ++ ++ random: rng@7e104000 { ++ /* Add alias */ ++ }; ++ ++ gpio@7e200000 { /* gpio */ ++ interrupts = <2 17>, <2 18>; ++ }; ++ ++ sdhost: sdhost@7e202000 { ++ compatible = "brcm,bcm2835-sdhost"; ++ reg = <0x7e202000 0x100>; ++ interrupts = <2 24>; ++ clocks = <&clocks BCM2835_CLOCK_VPU>; ++ dmas = <&dma 13>; ++ dma-names = "rx-tx"; ++ brcm,overclock-50 = <0>; ++ brcm,pio-limit = <1>; ++ status = "disabled"; ++ }; ++ ++ i2s@7e203000 { /* i2s */ ++ #sound-dai-cells = <0>; ++ reg = <0x7e203000 0x24>; ++ clocks = <&clocks BCM2835_CLOCK_PCM>; ++ }; ++ ++ spi0: spi@7e204000 { ++ /* Add alias */ ++ dmas = <&dma 6>, <&dma 7>; ++ dma-names = "tx", "rx"; ++ }; ++ ++ pixelvalve0: pixelvalve@7e206000 { ++ /* Add alias */ ++ status = "disabled"; ++ }; ++ ++ pixelvalve1: pixelvalve@7e207000 { ++ /* Add alias */ ++ status = "disabled"; ++ }; ++ ++ dpi: dpi@7e208000 { ++ compatible = "brcm,bcm2835-dpi"; ++ reg = <0x7e208000 0x8c>; ++ clocks = <&clocks BCM2835_CLOCK_VPU>, ++ <&clocks BCM2835_CLOCK_DPI>; ++ clock-names = "core", "pixel"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ /delete-node/ sdhci@7e300000; ++ ++ mmc: mmc@7e300000 { ++ compatible = "brcm,bcm2835-mmc"; ++ reg = <0x7e300000 0x100>; ++ interrupts = <2 30>; ++ clocks = <&clocks BCM2835_CLOCK_EMMC>; ++ dmas = <&dma 11>; ++ dma-names = "rx-tx"; ++ brcm,overclock-50 = <0>; ++ status = "disabled"; ++ }; ++ ++ hvs: hvs@7e400000 { ++ /* Add alias */ ++ status = "disabled"; ++ }; ++ ++ firmwarekms: firmwarekms@7e600000 { ++ compatible = "raspberrypi,rpi-firmware-kms"; ++ /* SMI interrupt reg */ ++ reg = <0x7e600000 0x100>; ++ interrupts = <2 16>; ++ brcm,firmware = <&firmware>; ++ status = "disabled"; ++ }; ++ ++ smi: smi@7e600000 { ++ compatible = "brcm,bcm2835-smi"; ++ reg = <0x7e600000 0x100>; ++ interrupts = <2 16>; ++ clocks = <&clocks BCM2835_CLOCK_SMI>; ++ assigned-clocks = <&cprman BCM2835_CLOCK_SMI>; ++ assigned-clock-rates = <125000000>; ++ dmas = <&dma 4>; ++ dma-names = "rx-tx"; ++ status = "disabled"; ++ }; ++ ++ pixelvalve2: pixelvalve@7e807000 { ++ /* Add alias */ ++ status = "disabled"; ++ }; ++ ++ hdmi@7e902000 { /* hdmi */ ++ status = "disabled"; ++ }; ++ ++ usb@7e980000 { /* usb */ ++ compatible = "brcm,bcm2708-usb"; ++ reg = <0x7e980000 0x10000>, ++ <0x7e006000 0x1000>; ++ interrupts = <2 0>, ++ <1 9>; ++ }; ++ ++ v3d@7ec00000 { /* vd3 */ ++ compatible = "brcm,vc4-v3d"; ++ power-domains = <&power RPI_POWER_DOMAIN_V3D>; ++ status = "disabled"; ++ }; ++ ++ gpu: gpu { ++ /* Add alias */ ++ status = "disabled"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -0,0 +1,203 @@ ++/dts-v1/; ++ ++#ifdef RPI364 ++/memreserve/ 0x00000000 0x00001000; ++#endif ++ ++#include "bcm2710.dtsi" ++ ++/ { ++ model = "Raspberry Pi 3 Model B"; ++}; ++ ++&gpio { ++ sdhost_pins: sdhost_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = <7>; // alt3 = SD1 ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = <43>; ++ brcm,function = <4>; /* alt0:GPCLK2 */ ++ brcm,pull = <0>; ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <32 33>; ++ brcm,function = <7>; /* alt3=UART0 */ ++ brcm,pull = <0 2>; ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 41>; ++ brcm,function = <4>; ++ }; ++}; ++ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&mmc { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ non-removable; ++ bus-width = <4>; ++ status = "okay"; ++ brcm,overclock-50 = <0>; ++}; ++ ++&soc { ++ virtgpio: virtgpio { ++ compatible = "brcm,bcm2835-virtgpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++}; ++ ++&fb { ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&virtgpio 0 0>; ++ }; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ chosen { ++ bootargs = "8250.nr_uarts=1"; ++ }; ++}; ++ ++/ { ++ __overrides__ { ++ uart0 = <&uart0>,"status"; ++ uart1 = <&uart1>,"status"; ++ i2s = <&i2s>,"status"; ++ spi = <&spi0>,"status"; ++ i2c0 = <&i2c0>,"status"; ++ i2c1 = <&i2c1>,"status"; ++ i2c2_iknowwhatimdoing = <&i2c2>,"status"; ++ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; ++ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ audio = <&audio>,"status"; ++ watchdog = <&watchdog>,"status"; ++ random = <&random>,"status"; ++ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; ++ sd_force_pio = <&sdhost>,"brcm,force-pio?"; ++ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; ++ sd_debug = <&sdhost>,"brcm,debug"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +@@ -0,0 +1,155 @@ ++/dts-v1/; ++ ++#include "bcm2710.dtsi" ++ ++/ { ++ model = "Raspberry Pi Compute Module 3"; ++}; ++ ++&gpio { ++ sdhost_pins: sdhost_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <4>; /* alt0 */ ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins; ++ brcm,function; ++ }; ++}; ++ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_pins>; ++ non-removable; ++ bus-width = <4>; ++ status = "okay"; ++ brcm,overclock-50 = <0>; ++}; ++ ++&soc { ++ virtgpio: virtgpio { ++ compatible = "brcm,bcm2835-virtgpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++}; ++ ++&fb { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&virtgpio 0 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ __overrides__ { ++ uart0 = <&uart0>,"status"; ++ uart1 = <&uart1>,"status"; ++ i2s = <&i2s>,"status"; ++ spi = <&spi0>,"status"; ++ i2c0 = <&i2c0>,"status"; ++ i2c1 = <&i2c1>,"status"; ++ i2c2_iknowwhatimdoing = <&i2c2>,"status"; ++ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; ++ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ audio = <&audio>,"status"; ++ watchdog = <&watchdog>,"status"; ++ random = <&random>,"status"; ++ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; ++ sd_force_pio = <&sdhost>,"brcm,force-pio?"; ++ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; ++ sd_debug = <&sdhost>,"brcm,debug"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2710.dtsi +@@ -0,0 +1,155 @@ ++#include "bcm283x.dtsi" ++#include "bcm270x.dtsi" ++#include "bcm2708-rpi.dtsi" ++ ++/ { ++ compatible = "brcm,bcm2837", "brcm,bcm2836"; ++ model = "BCM2837"; ++ ++ soc { ++ ranges = <0x7e000000 0x3f000000 0x01000000>, ++ <0x40000000 0x40000000 0x00040000>; ++ dma-ranges = <0xc0000000 0x00000000 0x3f000000>; ++ ++ local_intc: local_intc { ++ compatible = "brcm,bcm2836-l1-intc"; ++ reg = <0x40000000 0x100>; ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ interrupt-parent = <&local_intc>; ++ }; ++ ++ arm-pmu { ++#ifdef RPI364 ++ compatible = "arm,armv8-pmuv3", "arm,cortex-a7-pmu"; ++#else ++ compatible = "arm,cortex-a7-pmu"; ++#endif ++ interrupt-parent = <&local_intc>; ++ interrupts = <9>; ++ }; ++ ++ timer { ++#ifdef RPI364 ++ compatible = "arm,armv8-timer", "arm,armv7-timer"; ++#else ++ compatible = "arm,armv7-timer"; ++#endif ++ interrupt-parent = <&local_intc>; ++ interrupts = <0>, // PHYS_SECURE_PPI ++ <1>, // PHYS_NONSECURE_PPI ++ <3>, // VIRT_PPI ++ <2>; // HYP_PPI ++ always-on; ++ }; ++ ++ syscon@40000000 { ++ compatible = "brcm,bcm2836-arm-local", "syscon"; ++ reg = <0x40000000 0x100>; ++ }; ++ }; ++ ++#ifdef RPI364 ++ cpus: cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ v8_cpu0: cpu@0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53", "arm,armv8"; ++ reg = <0x0>; ++ clock-frequency = <1200000000>; ++ }; ++ ++ v8_cpu1: cpu@1 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53", "arm,armv8"; ++ reg = <0x1>; ++ clock-frequency = <1200000000>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0x000000e0>; ++ }; ++ ++ v8_cpu2: cpu@2 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53", "arm,armv8"; ++ reg = <0x2>; ++ clock-frequency = <1200000000>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0x000000e8>; ++ }; ++ ++ v8_cpu3: cpu@3 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53", "arm,armv8"; ++ reg = <0x3>; ++ clock-frequency = <1200000000>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0x000000f0>; ++ }; ++ }; ++ ++ __overrides__ { ++ arm_freq = <&v8_cpu0>, "clock-frequency:0", ++ <&v8_cpu1>, "clock-frequency:0", ++ <&v8_cpu2>, "clock-frequency:0", ++ <&v8_cpu3>, "clock-frequency:0"; ++ }; ++ ++#else ++ cpus: cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ v7_cpu0: cpu@0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a7"; ++ reg = <0x000>; ++ clock-frequency = <800000000>; ++ }; ++ ++ v7_cpu1: cpu@1 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a7"; ++ reg = <0x001>; ++ clock-frequency = <800000000>; ++ }; ++ ++ v7_cpu2: cpu@2 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a7"; ++ reg = <0x002>; ++ clock-frequency = <800000000>; ++ }; ++ ++ v7_cpu3: cpu@3 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a7"; ++ reg = <0x003>; ++ clock-frequency = <800000000>; ++ }; ++ }; ++ ++ __overrides__ { ++ arm_freq = <&v7_cpu0>, "clock-frequency:0", ++ <&v7_cpu1>, "clock-frequency:0", ++ <&v7_cpu2>, "clock-frequency:0", ++ <&v7_cpu3>, "clock-frequency:0"; ++ }; ++#endif ++}; ++ ++&intc { ++ compatible = "brcm,bcm2836-armctrl-ic"; ++ reg = <0x7e00b200 0x200>; ++ interrupt-parent = <&local_intc>; ++ interrupts = <8>; ++}; ++ ++#ifdef RPI364 ++&usb { ++ compatible = "brcm,bcm2835-usb"; ++ reg = <0x7e980000 0x10000>; ++ interrupts = <1 9>; ++}; ++#endif +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -0,0 +1,105 @@ ++# Overlays for the Raspberry Pi platform ++ ++dtbo-$(CONFIG_ARCH_BCM2835) += \ ++ adau1977-adc.dtbo \ ++ ads1015.dtbo \ ++ ads7846.dtbo \ ++ akkordion-iqdacplus.dtbo \ ++ allo-piano-dac-pcm512x-audio.dtbo \ ++ at86rf233.dtbo \ ++ audioinjector-wm8731-audio.dtbo \ ++ audremap.dtbo \ ++ bmp085_i2c-sensor.dtbo \ ++ dht11.dtbo \ ++ dionaudio-loco.dtbo \ ++ dpi18.dtbo \ ++ dpi24.dtbo \ ++ dwc-otg.dtbo \ ++ dwc2.dtbo \ ++ enc28j60.dtbo \ ++ enc28j60-spi2.dtbo \ ++ gpio-ir.dtbo \ ++ gpio-poweroff.dtbo \ ++ hifiberry-amp.dtbo \ ++ hifiberry-dac.dtbo \ ++ hifiberry-dacplus.dtbo \ ++ hifiberry-digi.dtbo \ ++ hifiberry-digi-pro.dtbo \ ++ hy28a.dtbo \ ++ hy28b.dtbo \ ++ i2c-bcm2708.dtbo \ ++ i2c-gpio.dtbo \ ++ i2c-mux.dtbo \ ++ i2c-pwm-pca9685a.dtbo \ ++ i2c-rtc.dtbo \ ++ i2c-sensor.dtbo \ ++ i2c0-bcm2708.dtbo \ ++ i2c1-bcm2708.dtbo \ ++ i2s-gpio28-31.dtbo \ ++ iqaudio-dac.dtbo \ ++ iqaudio-dacplus.dtbo \ ++ iqaudio-digi-wm8804-audio.dtbo \ ++ justboom-dac.dtbo \ ++ justboom-digi.dtbo \ ++ lirc-rpi.dtbo \ ++ mcp23017.dtbo \ ++ mcp23s17.dtbo \ ++ mcp2515-can0.dtbo \ ++ mcp2515-can1.dtbo \ ++ midi-uart0.dtbo \ ++ mmc.dtbo \ ++ mz61581.dtbo \ ++ pi3-act-led.dtbo \ ++ pi3-disable-bt.dtbo \ ++ pi3-miniuart-bt.dtbo \ ++ piscreen.dtbo \ ++ piscreen2r.dtbo \ ++ pisound.dtbo \ ++ pitft22.dtbo \ ++ pitft28-capacitive.dtbo \ ++ pitft28-resistive.dtbo \ ++ pitft35-resistive.dtbo \ ++ pps-gpio.dtbo \ ++ pwm.dtbo \ ++ pwm-2chan.dtbo \ ++ qca7000.dtbo \ ++ raspidac3.dtbo \ ++ rpi-backlight.dtbo \ ++ rpi-dac.dtbo \ ++ rpi-display.dtbo \ ++ rpi-ft5406.dtbo \ ++ rpi-proto.dtbo \ ++ rpi-sense.dtbo \ ++ rra-digidac1-wm8741-audio.dtbo \ ++ sc16is750-i2c.dtbo \ ++ sc16is752-spi1.dtbo \ ++ sdhost.dtbo \ ++ sdio.dtbo \ ++ sdio-1bit.dtbo \ ++ sdtweak.dtbo \ ++ smi.dtbo \ ++ smi-dev.dtbo \ ++ smi-nand.dtbo \ ++ spi-gpio35-39.dtbo \ ++ spi-rtc.dtbo \ ++ spi0-hw-cs.dtbo \ ++ spi1-1cs.dtbo \ ++ spi1-2cs.dtbo \ ++ spi1-3cs.dtbo \ ++ spi2-1cs.dtbo \ ++ spi2-2cs.dtbo \ ++ spi2-3cs.dtbo \ ++ tinylcd35.dtbo \ ++ uart1.dtbo \ ++ vc4-fkms-v3d.dtbo \ ++ vc4-kms-v3d.dtbo \ ++ vga666.dtbo \ ++ w1-gpio.dtbo \ ++ w1-gpio-pullup.dtbo \ ++ wittypi.dtbo ++ ++targets += dtbs dtbs_install ++targets += $(dtbo-y) ++ ++always := $(dtbo-y) ++clean-files := *.dtbo +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/README +@@ -0,0 +1,1368 @@ ++Introduction ++============ ++ ++This directory contains Device Tree overlays. Device Tree makes it possible ++to support many hardware configurations with a single kernel and without the ++need to explicitly load or blacklist kernel modules. Note that this isn't a ++"pure" Device Tree configuration (c.f. MACH_BCM2835) - some on-board devices ++are still configured by the board support code, but the intention is to ++eventually reach that goal. ++ ++On Raspberry Pi, Device Tree usage is controlled from /boot/config.txt. By ++default, the Raspberry Pi kernel boots with device tree enabled. You can ++completely disable DT usage (for now) by adding: ++ ++ device_tree= ++ ++to your config.txt, which should cause your Pi to revert to the old way of ++doing things after a reboot. ++ ++In /boot you will find a .dtb for each base platform. This describes the ++hardware that is part of the Raspberry Pi board. The loader (start.elf and its ++siblings) selects the .dtb file appropriate for the platform by name, and reads ++it into memory. At this point, all of the optional interfaces (i2c, i2s, spi) ++are disabled, but they can be enabled using Device Tree parameters: ++ ++ dtparam=i2c=on,i2s=on,spi=on ++ ++However, this shouldn't be necessary in many use cases because loading an ++overlay that requires one of those interfaces will cause it to be enabled ++automatically, and it is advisable to only enable interfaces if they are ++needed. ++ ++Configuring additional, optional hardware is done using Device Tree overlays ++(see below). ++ ++raspi-config ++============ ++ ++The Advanced Options section of the raspi-config utility can enable and disable ++Device Tree use, as well as toggling the I2C and SPI interfaces. Note that it ++is possible to both enable an interface and blacklist the driver, if for some ++reason you should want to defer the loading. ++ ++Modules ++======= ++ ++As well as describing the hardware, Device Tree also gives enough information ++to allow suitable driver modules to be located and loaded, with the corollary ++that unneeded modules are not loaded. As a result it should be possible to ++remove lines from /etc/modules, and /etc/modprobe.d/raspi-blacklist.conf can ++have its contents deleted (or commented out). ++ ++Using Overlays ++============== ++ ++Overlays are loaded using the "dtoverlay" directive. As an example, consider ++the popular lirc-rpi module, the Linux Infrared Remote Control driver. In the ++pre-DT world this would be loaded from /etc/modules, with an explicit ++"modprobe lirc-rpi" command, or programmatically by lircd. With DT enabled, ++this becomes a line in config.txt: ++ ++ dtoverlay=lirc-rpi ++ ++This causes the file /boot/overlays/lirc-rpi.dtbo to be loaded. By ++default it will use GPIOs 17 (out) and 18 (in), but this can be modified using ++DT parameters: ++ ++ dtoverlay=lirc-rpi,gpio_out_pin=17,gpio_in_pin=13 ++ ++Parameters always have default values, although in some cases (e.g. "w1-gpio") ++it is necessary to provided multiple overlays in order to get the desired ++behaviour. See the list of overlays below for a description of the parameters ++and their defaults. ++ ++The Overlay and Parameter Reference ++=================================== ++ ++N.B. When editing this file, please preserve the indentation levels to make it ++simple to parse programmatically. NO HARD TABS. ++ ++ ++Name: ++Info: Configures the base Raspberry Pi hardware ++Load: ++Params: ++ audio Set to "on" to enable the onboard ALSA audio ++ interface (default "off") ++ ++ i2c_arm Set to "on" to enable the ARM's i2c interface ++ (default "off") ++ ++ i2c_vc Set to "on" to enable the i2c interface ++ usually reserved for the VideoCore processor ++ (default "off") ++ ++ i2c An alias for i2c_arm ++ ++ i2c_arm_baudrate Set the baudrate of the ARM's i2c interface ++ (default "100000") ++ ++ i2c_vc_baudrate Set the baudrate of the VideoCore i2c interface ++ (default "100000") ++ ++ i2c_baudrate An alias for i2c_arm_baudrate ++ ++ i2s Set to "on" to enable the i2s interface ++ (default "off") ++ ++ spi Set to "on" to enable the spi interfaces ++ (default "off") ++ ++ random Set to "on" to enable the hardware random ++ number generator (default "on") ++ ++ sd_overclock Clock (in MHz) to use when the MMC framework ++ requests 50MHz ++ ++ sd_force_pio Disable DMA support for SD driver (default off) ++ ++ sd_pio_limit Number of blocks above which to use DMA for ++ SD card (default 1) ++ ++ sd_debug Enable debug output from SD driver (default off) ++ ++ uart0 Set to "off" to disable uart0 (default "on") ++ ++ uart1 Set to "on" or "off" to enable or disable uart1 ++ (default varies) ++ ++ watchdog Set to "on" to enable the hardware watchdog ++ (default "off") ++ ++ act_led_trigger Choose which activity the LED tracks. ++ Use "heartbeat" for a nice load indicator. ++ (default "mmc") ++ ++ act_led_activelow Set to "on" to invert the sense of the LED ++ (default "off") ++ N.B. For Pi3 see pi3-act-led overlay. ++ ++ act_led_gpio Set which GPIO to use for the activity LED ++ (in case you want to connect it to an external ++ device) ++ (default "16" on a non-Plus board, "47" on a ++ Plus or Pi 2) ++ N.B. For Pi3 see pi3-act-led overlay. ++ ++ pwr_led_trigger ++ pwr_led_activelow ++ pwr_led_gpio ++ As for act_led_*, but using the PWR LED. ++ Not available on Model A/B boards. ++ ++ N.B. It is recommended to only enable those interfaces that are needed. ++ Leaving all interfaces enabled can lead to unwanted behaviour (i2c_vc ++ interfering with Pi Camera, I2S and SPI hogging GPIO pins, etc.) ++ Note also that i2c, i2c_arm and i2c_vc are aliases for the physical ++ interfaces i2c0 and i2c1. Use of the numeric variants is still possible ++ but deprecated because the ARM/VC assignments differ between board ++ revisions. The same board-specific mapping applies to i2c_baudrate, ++ and the other i2c baudrate parameters. ++ ++ ++Name: adau1977-adc ++Info: Overlay for activation of ADAU1977 ADC codec over I2C for control ++ and I2S for data. ++Load: dtoverlay=adau1977-adc ++Params: ++ ++ ++Name: ads1015 ++Info: Overlay for activation of Texas Instruments ADS1015 ADC over I2C ++Load: dtoverlay=ads1015,= ++Params: addr I2C bus address of device. Set based on how the ++ addr pin is wired. (default=0x48 assumes addr ++ is pulled to GND) ++ cha_enable Enable virtual channel a. (default=true) ++ cha_cfg Set the configuration for virtual channel a. ++ (default=4 configures this channel for the ++ voltage at A0 with respect to GND) ++ cha_datarate Set the datarate (samples/sec) for this channel. ++ (default=4 sets 1600 sps) ++ cha_gain Set the gain of the Programmable Gain ++ Amplifier for this channel. (default=2 sets the ++ full scale of the channel to 2.048 Volts) ++ ++ Channel (ch) parameters can be set for each enabled channel. ++ A maximum of 4 channels can be enabled (letters a thru d). ++ For more information refer to the device datasheet at: ++ http://www.ti.com/lit/ds/symlink/ads1015.pdf ++ ++ ++Name: ads7846 ++Info: ADS7846 Touch controller ++Load: dtoverlay=ads7846,= ++Params: cs SPI bus Chip Select (default 1) ++ speed SPI bus speed (default 2MHz, max 3.25MHz) ++ penirq GPIO used for PENIRQ. REQUIRED ++ penirq_pull Set GPIO pull (default 0=none, 2=pullup) ++ swapxy Swap x and y axis ++ xmin Minimum value on the X axis (default 0) ++ ymin Minimum value on the Y axis (default 0) ++ xmax Maximum value on the X axis (default 4095) ++ ymax Maximum value on the Y axis (default 4095) ++ pmin Minimum reported pressure value (default 0) ++ pmax Maximum reported pressure value (default 65535) ++ xohms Touchpanel sensitivity (X-plate resistance) ++ (default 400) ++ ++ penirq is required and usually xohms (60-100) has to be set as well. ++ Apart from that, pmax (255) and swapxy are also common. ++ The rest of the calibration can be done with xinput-calibrator. ++ See: github.com/notro/fbtft/wiki/FBTFT-on-Raspian ++ Device Tree binding document: ++ www.kernel.org/doc/Documentation/devicetree/bindings/input/ads7846.txt ++ ++ ++Name: akkordion-iqdacplus ++Info: Configures the Digital Dreamtime Akkordion Music Player (based on the ++ OEM IQAudIO DAC+ or DAC Zero module). ++Load: dtoverlay=akkordion-iqdacplus,= ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ dtoverlay=akkordion-iqdacplus,24db_digital_gain ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24db_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ ++ ++Name: allo-piano-dac-pcm512x-audio ++Info: Configures the Allo Piano DAC (2.0/2.1) audio cards. ++ (NB. This initial support is for 2.0 channel audio ONLY! ie. stereo. ++ The subwoofer outputs on the Piano 2.1 are not currently supported!) ++Load: dtoverlay=allo-piano-dac-pcm512x-audio, ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24db_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ ++ ++Name: at86rf233 ++Info: Configures the Atmel AT86RF233 802.15.4 low-power WPAN transceiver, ++ connected to spi0.0 ++Load: dtoverlay=at86rf233,= ++Params: interrupt GPIO used for INT (default 23) ++ reset GPIO used for Reset (default 24) ++ sleep GPIO used for Sleep (default 25) ++ speed SPI bus speed in Hz (default 3000000) ++ trim Fine tuning of the internal capacitance ++ arrays (0=+0pF, 15=+4.5pF, default 15) ++ ++ ++Name: audioinjector-wm8731-audio ++Info: Configures the audioinjector.net audio add on soundcard ++Load: dtoverlay=audioinjector-wm8731-audio ++Params: ++ ++ ++Name: audremap ++Info: Switches PWM sound output to pins 12 (Right) & 13 (Left) ++Load: dtoverlay=audremap,= ++Params: swap_lr Reverse the channel allocation, which will also ++ swap the audio jack outputs (default off) ++ enable_jack Don't switch off the audio jack output ++ (default off) ++ ++ ++Name: bmp085_i2c-sensor ++Info: This overlay is now deprecated - see i2c-sensor ++Load: dtoverlay=bmp085_i2c-sensor ++Params: ++ ++ ++Name: dht11 ++Info: Overlay for the DHT11/DHT21/DHT22 humidity/temperature sensors ++ Also sometimes found with the part number(s) AM230x. ++Load: dtoverlay=dht11,= ++Params: gpiopin GPIO connected to the sensor's DATA output. ++ (default 4) ++ ++ ++Name: dionaudio-loco ++Info: Configures the Dion Audio LOCO DAC-AMP ++Load: dtoverlay=dionaudio-loco ++Params: ++ ++ ++Name: dpi18 ++Info: Overlay for a generic 18-bit DPI display ++ This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output ++ 2-3 seconds after the kernel has started. ++Load: dtoverlay=dpi18 ++Params: ++ ++ ++Name: dpi24 ++Info: Overlay for a generic 24-bit DPI display ++ This uses GPIOs 0-27 (so no I2C, uart etc.), and activates the output ++ 2-3 seconds after the kernel has started. ++Load: dtoverlay=dpi24 ++Params: ++ ++ ++Name: dwc-otg ++Info: Selects the dwc_otg USB controller driver which has fiq support. This ++ is the default on all except the Pi Zero which defaults to dwc2. ++Load: dtoverlay=dwc-otg ++Params: ++ ++ ++Name: dwc2 ++Info: Selects the dwc2 USB controller driver ++Load: dtoverlay=dwc2,= ++Params: dr_mode Dual role mode: "host", "peripheral" or "otg" ++ ++ g-rx-fifo-size Size of rx fifo size in gadget mode ++ ++ g-np-tx-fifo-size Size of non-periodic tx fifo size in gadget ++ mode ++ ++ g-tx-fifo-size Size of periodic tx fifo per endpoint ++ (except ep0) in gadget mode ++ ++ ++[ The ds1307-rtc overlay has been deleted. See i2c-rtc. ] ++ ++ ++Name: enc28j60 ++Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI0 ++Load: dtoverlay=enc28j60,= ++Params: int_pin GPIO used for INT (default 25) ++ ++ speed SPI bus speed (default 12000000) ++ ++ ++Name: enc28j60-spi2 ++Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI2 ++Load: dtoverlay=enc28j60-spi2,= ++Params: int_pin GPIO used for INT (default 39) ++ ++ speed SPI bus speed (default 12000000) ++ ++ ++Name: gpio-ir ++Info: Use GPIO pin as rc-core style infrared receiver input. The rc-core- ++ based gpio_ir_recv driver maps received keys directly to a ++ /dev/input/event* device, all decoding is done by the kernel - LIRC is ++ not required! The key mapping and other decoding parameters can be ++ configured by "ir-keytable" tool. ++Load: dtoverlay=gpio-ir,= ++Params: gpio_pin Input pin number. Default is 18. ++ ++ gpio_pull Desired pull-up/down state (off, down, up) ++ Default is "down". ++ ++ rc-map-name Default rc keymap (can also be changed by ++ ir-keytable), defaults to "rc-rc6-mce" ++ ++ ++Name: gpio-poweroff ++Info: Drives a GPIO high or low on poweroff (including halt) ++Load: dtoverlay=gpio-poweroff,= ++Params: gpiopin GPIO for signalling (default 26) ++ ++ active_low Set if the power control device requires a ++ high->low transition to trigger a power-down. ++ Note that this will require the support of a ++ custom dt-blob.bin to prevent a power-down ++ during the boot process, and that a reboot ++ will also cause the pin to go low. ++ ++ ++Name: hifiberry-amp ++Info: Configures the HifiBerry Amp and Amp+ audio cards ++Load: dtoverlay=hifiberry-amp ++Params: ++ ++ ++Name: hifiberry-dac ++Info: Configures the HifiBerry DAC audio card ++Load: dtoverlay=hifiberry-dac ++Params: ++ ++ ++Name: hifiberry-dacplus ++Info: Configures the HifiBerry DAC+ audio card ++Load: dtoverlay=hifiberry-dacplus,= ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ "dtoverlay=hifiberry-dacplus,24db_digital_gain" ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24dB_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ slave Force DAC+ Pro into slave mode, using Pi as ++ master for bit clock and frame clock. ++ ++ ++Name: hifiberry-digi ++Info: Configures the HifiBerry Digi and Digi+ audio card ++Load: dtoverlay=hifiberry-digi ++Params: ++ ++ ++Name: hifiberry-digi-pro ++Info: Configures the HifiBerry Digi+ Pro audio card ++Load: dtoverlay=hifiberry-digi-pro ++Params: ++ ++ ++Name: hy28a ++Info: HY28A - 2.8" TFT LCD Display Module by HAOYU Electronics ++ Default values match Texy's display shield ++Load: dtoverlay=hy28a,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ xohms Touchpanel sensitivity (X-plate resistance) ++ ++ resetgpio GPIO used to reset controller ++ ++ ledgpio GPIO used to control backlight ++ ++ ++Name: hy28b ++Info: HY28B - 2.8" TFT LCD Display Module by HAOYU Electronics ++ Default values match Texy's display shield ++Load: dtoverlay=hy28b,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ xohms Touchpanel sensitivity (X-plate resistance) ++ ++ resetgpio GPIO used to reset controller ++ ++ ledgpio GPIO used to control backlight ++ ++ ++Name: i2c-bcm2708 ++Info: Fall back to the i2c_bcm2708 driver for the i2c_arm bus. ++Load: dtoverlay=i2c-bcm2708 ++Params: ++ ++ ++Name: i2c-gpio ++Info: Adds support for software i2c controller on gpio pins ++Load: dtoverlay=i2c-gpio,= ++Params: i2c_gpio_sda GPIO used for I2C data (default "23") ++ ++ i2c_gpio_scl GPIO used for I2C clock (default "24") ++ ++ i2c_gpio_delay_us Clock delay in microseconds ++ (default "2" = ~100kHz) ++ ++ ++Name: i2c-mux ++Info: Adds support for a number of I2C bus multiplexers on i2c_arm ++Load: dtoverlay=i2c-mux,= ++Params: pca9542 Select the NXP PCA9542 device ++ ++ pca9545 Select the NXP PCA9545 device ++ ++ pca9548 Select the NXP PCA9548 device ++ ++ addr Change I2C address of the device (default 0x70) ++ ++ ++[ The i2c-mux-pca9548a overlay has been deleted. See i2c-mux. ] ++ ++ ++Name: i2c-pwm-pca9685a ++Info: Adds support for an NXP PCA9685A I2C PWM controller on i2c_arm ++Load: dtoverlay=i2c-pwm-pca9685a,= ++Params: addr I2C address of PCA9685A (default 0x40) ++ ++ ++Name: i2c-rtc ++Info: Adds support for a number of I2C Real Time Clock devices ++Load: dtoverlay=i2c-rtc,= ++Params: abx80x Select one of the ABx80x family: ++ AB0801, AB0803, AB0804, AB0805, ++ AB1801, AB1803, AB1804, AB1805 ++ ++ ds1307 Select the DS1307 device ++ ++ ds1339 Select the DS1339 device ++ ++ ds3231 Select the DS3231 device ++ ++ mcp7940x Select the MCP7940x device ++ ++ mcp7941x Select the MCP7941x device ++ ++ pcf2127 Select the PCF2127 device ++ ++ pcf8523 Select the PCF8523 device ++ ++ pcf8563 Select the PCF8563 device ++ ++ trickle-diode-type Diode type for trickle charge - "standard" or ++ "schottky" (ABx80x only) ++ ++ trickle-resistor-ohms Resistor value for trickle charge (DS1339, ++ ABx80x) ++ ++ wakeup-source Specify that the RTC can be used as a wakeup ++ source ++ ++ ++Name: i2c-sensor ++Info: Adds support for a number of I2C barometric pressure and temperature ++ sensors on i2c_arm ++Load: dtoverlay=i2c-sensor,= ++Params: bmp085 Select the Bosch sensortronic BMP085 ++ ++ bmp280 Select the Bosch sensortronic BMP280 ++ ++ ++Name: i2c0-bcm2708 ++Info: Enable the i2c_bcm2708 driver for the i2c0 bus. Not all pin combinations ++ are usable on all platforms. ++Load: dtoverlay=i2c0-bcm2708,= ++Params: sda0_pin GPIO pin for SDA0 (deprecated - use pins_*) ++ scl0_pin GPIO pin for SCL0 (deprecated - use pins_*) ++ pins_0_1 Use pins 0 and 1 (default) ++ pins_28_29 Use pins 28 and 29 ++ pins_44_45 Use pins 44 and 45 ++ pins_46_47 Use pins 46 and 47 ++ ++ ++Name: i2c1-bcm2708 ++Info: Enable the i2c_bcm2708 driver for the i2c1 bus ++Load: dtoverlay=i2c1-bcm2708,= ++Params: sda1_pin GPIO pin for SDA1 (2 or 44 - default 2) ++ scl1_pin GPIO pin for SCL1 (3 or 45 - default 3) ++ pin_func Alternative pin function (4 (alt0), 6 (alt2) - ++ default 4) ++ ++ ++Name: i2s-gpio28-31 ++Info: move I2S function block to GPIO 28 to 31 ++Load: dtoverlay=i2s-gpio28-31 ++Params: ++ ++ ++Name: iqaudio-dac ++Info: Configures the IQaudio DAC audio card ++Load: dtoverlay=iqaudio-dac, ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ "dtoverlay=iqaudio-dac,24db_digital_gain" ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24db_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ ++ ++Name: iqaudio-dacplus ++Info: Configures the IQaudio DAC+ audio card ++Load: dtoverlay=iqaudio-dacplus,= ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ "dtoverlay=iqaudio-dacplus,24db_digital_gain" ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24db_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ auto_mute_amp If specified, unmute/mute the IQaudIO amp when ++ starting/stopping audio playback. ++ unmute_amp If specified, unmute the IQaudIO amp once when ++ the DAC driver module loads. ++ ++ ++Name: iqaudio-digi-wm8804-audio ++Info: Configures the IQAudIO Digi WM8804 audio card ++Load: dtoverlay=iqaudio-digi-wm8804-audio,= ++Params: card_name Override the default, "IQAudIODigi", card name. ++ dai_name Override the default, "IQAudIO Digi", dai name. ++ dai_stream_name Override the default, "IQAudIO Digi HiFi", ++ dai stream name. ++ ++ ++Name: justboom-dac ++Info: Configures the JustBoom DAC HAT, Amp HAT, DAC Zero and Amp Zero audio ++ cards ++Load: dtoverlay=justboom-dac,= ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ "dtoverlay=justboom-dac,24db_digital_gain" ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24dB_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ ++ ++Name: justboom-digi ++Info: Configures the JustBoom Digi HAT and Digi Zero audio cards ++Load: dtoverlay=justboom-digi ++Params: ++ ++ ++Name: lirc-rpi ++Info: Configures lirc-rpi (Linux Infrared Remote Control for Raspberry Pi) ++ Consult the module documentation for more details. ++Load: dtoverlay=lirc-rpi,= ++Params: gpio_out_pin GPIO for output (default "17") ++ ++ gpio_in_pin GPIO for input (default "18") ++ ++ gpio_in_pull Pull up/down/off on the input pin ++ (default "down") ++ ++ sense Override the IR receive auto-detection logic: ++ "0" = force active-high ++ "1" = force active-low ++ "-1" = use auto-detection ++ (default "-1") ++ ++ softcarrier Turn the software carrier "on" or "off" ++ (default "on") ++ ++ invert "on" = invert the output pin (default "off") ++ ++ debug "on" = enable additional debug messages ++ (default "off") ++ ++ ++Name: mcp23017 ++Info: Configures the MCP23017 I2C GPIO expander ++Load: dtoverlay=mcp23017,= ++Params: gpiopin Gpio pin connected to the INTA output of the ++ MCP23017 (default: 4) ++ ++ addr I2C address of the MCP23017 (default: 0x20) ++ ++ ++Name: mcp23s17 ++Info: Configures the MCP23S08/17 SPI GPIO expanders. ++ If devices are present on SPI1 or SPI2, those interfaces must be enabled ++ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. ++ If interrupts are enabled for a device on a given CS# on a SPI bus, that ++ device must be the only one present on that SPI bus/CS#. ++Load: dtoverlay=mcp23s17,= ++Params: s08-spi--present 4-bit integer, bitmap indicating MCP23S08 ++ devices present on SPI, CS# ++ ++ s17-spi--present 8-bit integer, bitmap indicating MCP23S17 ++ devices present on SPI, CS# ++ ++ s08-spi--int-gpio integer, enables interrupts on a single ++ MCP23S08 device on SPI, CS#, specifies ++ the GPIO pin to which INT output of MCP23S08 ++ is connected. ++ ++ s17-spi--int-gpio integer, enables mirrored interrupts on a ++ single MCP23S17 device on SPI, CS#, ++ specifies the GPIO pin to which either INTA ++ or INTB output of MCP23S17 is connected. ++ ++ ++Name: mcp2515-can0 ++Info: Configures the MCP2515 CAN controller on spi0.0 ++Load: dtoverlay=mcp2515-can0,= ++Params: oscillator Clock frequency for the CAN controller (Hz) ++ ++ spimaxfrequency Maximum SPI frequence (Hz) ++ ++ interrupt GPIO for interrupt signal ++ ++ ++Name: mcp2515-can1 ++Info: Configures the MCP2515 CAN controller on spi0.1 ++Load: dtoverlay=mcp2515-can1,= ++Params: oscillator Clock frequency for the CAN controller (Hz) ++ ++ spimaxfrequency Maximum SPI frequence (Hz) ++ ++ interrupt GPIO for interrupt signal ++ ++ ++Name: midi-uart0 ++Info: Configures UART0 (ttyAMA0) so that a requested 38.4kbaud actually gets ++ 31.25kbaud, the frequency required for MIDI ++Load: dtoverlay=midi-uart0 ++Params: ++ ++ ++Name: mmc ++Info: Selects the bcm2835-mmc SD/MMC driver, optionally with overclock ++Load: dtoverlay=mmc,= ++Params: overclock_50 Clock (in MHz) to use when the MMC framework ++ requests 50MHz ++ ++ ++Name: mz61581 ++Info: MZ61581 display by Tontec ++Load: dtoverlay=mz61581,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ txbuflen Transmit buffer length (default 32768) ++ ++ debug Debug output level {0-7} ++ ++ xohms Touchpanel sensitivity (X-plate resistance) ++ ++ ++[ The pcf2127-rtc overlay has been deleted. See i2c-rtc. ] ++ ++ ++[ The pcf8523-rtc overlay has been deleted. See i2c-rtc. ] ++ ++ ++[ The pcf8563-rtc overlay has been deleted. See i2c-rtc. ] ++ ++ ++Name: pi3-act-led ++Info: Pi3 uses a GPIO expander to drive the LEDs which can only be accessed ++ from the VPU. There is a special driver for this with a separate DT ++ node, which has the unfortunate consequence of breaking the ++ act_led_gpio and act_led_activelow dtparams. ++ This overlay changes the GPIO controller back to the standard one and ++ restores the dtparams. ++Load: dtoverlay=pi3-act-led,= ++Params: activelow Set to "on" to invert the sense of the LED ++ (default "off") ++ ++ gpio Set which GPIO to use for the activity LED ++ (in case you want to connect it to an external ++ device) ++ REQUIRED ++ ++ ++Name: pi3-disable-bt ++Info: Disable Pi3 Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15 ++ N.B. To disable the systemd service that initialises the modem so it ++ doesn't use the UART, use 'sudo systemctl disable hciuart'. ++Load: dtoverlay=pi3-disable-bt ++Params: ++ ++ ++Name: pi3-miniuart-bt ++Info: Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore ++ UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum ++ usable baudrate. ++ N.B. It is also necessary to edit /lib/systemd/system/hciuart.service ++ and replace ttyAMA0 with ttyS0, unless you have a system with udev rules ++ that create /dev/serial0 and /dev/serial1, in which case use ++ /dev/serial1 instead because it will always be correct. Furthermore, ++ you must also set core_freq=250 in config.txt or the miniuart will not ++ work. ++Load: dtoverlay=pi3-miniuart-bt ++Params: ++ ++ ++Name: piscreen ++Info: PiScreen display by OzzMaker.com ++Load: dtoverlay=piscreen,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ xohms Touchpanel sensitivity (X-plate resistance) ++ ++ ++Name: piscreen2r ++Info: PiScreen 2 with resistive TP display by OzzMaker.com ++Load: dtoverlay=piscreen2r,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ xohms Touchpanel sensitivity (X-plate resistance) ++ ++ ++Name: pisound ++Info: Configures the Blokas Labs pisound card ++Load: dtoverlay=pisound ++Params: ++ ++ ++Name: pitft22 ++Info: Adafruit PiTFT 2.2" screen ++Load: dtoverlay=pitft22,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ ++Name: pitft28-capacitive ++Info: Adafruit PiTFT 2.8" capacitive touch screen ++Load: dtoverlay=pitft28-capacitive,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ touch-sizex Touchscreen size x (default 240) ++ ++ touch-sizey Touchscreen size y (default 320) ++ ++ touch-invx Touchscreen inverted x axis ++ ++ touch-invy Touchscreen inverted y axis ++ ++ touch-swapxy Touchscreen swapped x y axis ++ ++ ++Name: pitft28-resistive ++Info: Adafruit PiTFT 2.8" resistive touch screen ++Load: dtoverlay=pitft28-resistive,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ ++Name: pitft35-resistive ++Info: Adafruit PiTFT 3.5" resistive touch screen ++Load: dtoverlay=pitft35-resistive,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ ++Name: pps-gpio ++Info: Configures the pps-gpio (pulse-per-second time signal via GPIO). ++Load: dtoverlay=pps-gpio,= ++Params: gpiopin Input GPIO (default "18") ++ assert_falling_edge When present, assert is indicated by a falling ++ edge, rather than by a rising edge ++ ++ ++Name: pwm ++Info: Configures a single PWM channel ++ Legal pin,function combinations for each channel: ++ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) ++ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) ++ N.B.: ++ 1) Pin 18 is the only one available on all platforms, and ++ it is the one used by the I2S audio interface. ++ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. ++ 2) The onboard analogue audio output uses both PWM channels. ++ 3) So be careful mixing audio and PWM. ++ 4) Currently the clock must have been enabled and configured ++ by other means. ++Load: dtoverlay=pwm,= ++Params: pin Output pin (default 18) - see table ++ func Pin function (default 2 = Alt5) - see above ++ clock PWM clock frequency (informational) ++ ++ ++Name: pwm-2chan ++Info: Configures both PWM channels ++ Legal pin,function combinations for each channel: ++ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) ++ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) ++ N.B.: ++ 1) Pin 18 is the only one available on all platforms, and ++ it is the one used by the I2S audio interface. ++ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. ++ 2) The onboard analogue audio output uses both PWM channels. ++ 3) So be careful mixing audio and PWM. ++ 4) Currently the clock must have been enabled and configured ++ by other means. ++Load: dtoverlay=pwm-2chan,= ++Params: pin Output pin (default 18) - see table ++ pin2 Output pin for other channel (default 19) ++ func Pin function (default 2 = Alt5) - see above ++ func2 Function for pin2 (default 2 = Alt5) ++ clock PWM clock frequency (informational) ++ ++ ++Name: qca7000 ++Info: I2SE's Evaluation Board for PLC Stamp micro ++Load: dtoverlay=qca7000,= ++Params: int_pin GPIO pin for interrupt signal (default 23) ++ ++ speed SPI bus speed (default 12 MHz) ++ ++ ++Name: raspidac3 ++Info: Configures the RaspiDAV Rev.3x audio card ++Load: dtoverlay=raspidac3 ++Params: ++ ++ ++Name: rpi-backlight ++Info: Raspberry Pi official display backlight driver ++Load: dtoverlay=rpi-backlight ++Params: ++ ++ ++Name: rpi-dac ++Info: Configures the RPi DAC audio card ++Load: dtoverlay=rpi-dac ++Params: ++ ++ ++Name: rpi-display ++Info: RPi-Display - 2.8" Touch Display by Watterott ++Load: dtoverlay=rpi-display,= ++Params: speed Display SPI bus speed ++ rotate Display rotation {0,90,180,270} ++ fps Delay between frame updates ++ debug Debug output level {0-7} ++ xohms Touchpanel sensitivity (X-plate resistance) ++ swapxy Swap x and y axis ++ ++ ++Name: rpi-ft5406 ++Info: Official Raspberry Pi display touchscreen ++Load: dtoverlay=rpi-ft5406 ++Params: ++ ++ ++Name: rpi-proto ++Info: Configures the RPi Proto audio card ++Load: dtoverlay=rpi-proto ++Params: ++ ++ ++Name: rpi-sense ++Info: Raspberry Pi Sense HAT ++Load: dtoverlay=rpi-sense ++Params: ++ ++ ++Name: rra-digidac1-wm8741-audio ++Info: Configures the Red Rocks Audio DigiDAC1 soundcard ++Load: dtoverlay=rra-digidac1-wm8741-audio ++Params: ++ ++ ++Name: sc16is750-i2c ++Info: Overlay for the NXP SC16IS750 UART with I2C Interface ++ Enables the chip on I2C1 at 0x48. To select another address, ++ please refer to table 10 in reference manual. ++ ++Load: dtoverlay=sc16is750-i2c,= ++Params: int_pin GPIO used for IRQ (default 24) ++ addr Address (default 0x48) ++ ++ ++Name: sc16is752-spi1 ++Info: Overlay for the NXP SC16IS752 Dual UART with SPI Interface ++ Enables the chip on SPI1. ++ N.B.: spi1 is only accessible on devices with a 40pin header, eg: ++ A+, B+, Zero and PI2 B; as well as the Compute Module. ++ ++Load: dtoverlay=sc16is752-spi1,= ++Params: int_pin GPIO used for IRQ (default 24) ++ ++ ++Name: sdhost ++Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock. ++ N.B. This overlay is designed for situations where the mmc driver is ++ the default, so it disables the other (mmc) interface - this will kill ++ WiFi on a Pi3. If this isn't what you want, either use the sdtweak ++ overlay or the new sd_* dtparams of the base DTBs. ++Load: dtoverlay=sdhost,= ++Params: overclock_50 Clock (in MHz) to use when the MMC framework ++ requests 50MHz ++ ++ force_pio Disable DMA support (default off) ++ ++ pio_limit Number of blocks above which to use DMA ++ (default 1) ++ ++ debug Enable debug output (default off) ++ ++ ++Name: sdio ++Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock, ++ and enables SDIO via GPIOs 22-27. ++Load: dtoverlay=sdio,= ++Params: overclock_50 SD Clock (in MHz) to use when the MMC framework ++ requests 50MHz ++ ++ sdio_overclock SDIO Clock (in MHz) to use when the MMC ++ framework requests 50MHz ++ ++ force_pio Disable DMA support (default off) ++ ++ pio_limit Number of blocks above which to use DMA ++ (default 1) ++ ++ debug Enable debug output (default off) ++ ++ poll_once Disable SDIO-device polling every second ++ (default on: polling once at boot-time) ++ ++ bus_width Set the SDIO host bus width (default 4 bits) ++ ++ ++Name: sdio-1bit ++Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock, ++ and enables 1-bit SDIO via GPIOs 22-25. ++Load: dtoverlay=sdio-1bit,= ++Params: overclock_50 SD Clock (in MHz) to use when the MMC framework ++ requests 50MHz ++ ++ sdio_overclock SDIO Clock (in MHz) to use when the MMC ++ framework requests 50MHz ++ ++ force_pio Disable DMA support (default off) ++ ++ pio_limit Number of blocks above which to use DMA ++ (default 1) ++ ++ debug Enable debug output (default off) ++ ++ poll_once Disable SDIO-device polling every second ++ (default on: polling once at boot-time) ++ ++ ++Name: sdtweak ++Info: Tunes the bcm2835-sdhost SD/MMC driver ++ N.B. This functionality is now available via the sd_* dtparams in the ++ base DTB. ++Load: dtoverlay=sdtweak,= ++Params: overclock_50 Clock (in MHz) to use when the MMC framework ++ requests 50MHz ++ ++ force_pio Disable DMA support (default off) ++ ++ pio_limit Number of blocks above which to use DMA ++ (default 1) ++ ++ debug Enable debug output (default off) ++ ++ ++Name: smi ++Info: Enables the Secondary Memory Interface peripheral. Uses GPIOs 2-25! ++Load: dtoverlay=smi ++Params: ++ ++ ++Name: smi-dev ++Info: Enables the userspace interface for the SMI driver ++Load: dtoverlay=smi-dev ++Params: ++ ++ ++Name: smi-nand ++Info: Enables access to NAND flash via the SMI interface ++Load: dtoverlay=smi-nand ++Params: ++ ++ ++Name: spi-gpio35-39 ++Info: move SPI function block to GPIO 35 to 39 ++Load: dtoverlay=spi-gpio35-39 ++Params: ++ ++ ++Name: spi-rtc ++Info: Adds support for a number of SPI Real Time Clock devices ++Load: dtoverlay=spi-rtc,= ++Params: pcf2123 Select the PCF2123 device ++ ++ ++Name: spi0-hw-cs ++Info: Re-enables hardware CS/CE (chip selects) for SPI0 ++Load: dtoverlay=spi0-hw-cs ++Params: ++ ++ ++Name: spi1-1cs ++Info: Enables spi1 with a single chip select (CS) line and associated spidev ++ dev node. The gpio pin number for the CS line and spidev device node ++ creation are configurable. ++ N.B.: spi1 is only accessible on devices with a 40pin header, eg: ++ A+, B+, Zero and PI2 B; as well as the Compute Module. ++Load: dtoverlay=spi1-1cs,= ++Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). ++ cs0_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev1.0 (default ++ is 'okay' or enabled). ++ ++ ++Name: spi1-2cs ++Info: Enables spi1 with two chip select (CS) lines and associated spidev ++ dev nodes. The gpio pin numbers for the CS lines and spidev device node ++ creation are configurable. ++ N.B.: spi1 is only accessible on devices with a 40pin header, eg: ++ A+, B+, Zero and PI2 B; as well as the Compute Module. ++Load: dtoverlay=spi1-2cs,= ++Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). ++ cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1). ++ cs0_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev1.0 (default ++ is 'okay' or enabled). ++ cs1_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev1.1 (default ++ is 'okay' or enabled). ++ ++ ++Name: spi1-3cs ++Info: Enables spi1 with three chip select (CS) lines and associated spidev ++ dev nodes. The gpio pin numbers for the CS lines and spidev device node ++ creation are configurable. ++ N.B.: spi1 is only accessible on devices with a 40pin header, eg: ++ A+, B+, Zero and PI2 B; as well as the Compute Module. ++Load: dtoverlay=spi1-3cs,= ++Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). ++ cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1). ++ cs2_pin GPIO pin for CS2 (default 16 - BCM SPI1_CE2). ++ cs0_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev1.0 (default ++ is 'okay' or enabled). ++ cs1_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev1.1 (default ++ is 'okay' or enabled). ++ cs2_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev1.2 (default ++ is 'okay' or enabled). ++ ++ ++Name: spi2-1cs ++Info: Enables spi2 with a single chip select (CS) line and associated spidev ++ dev node. The gpio pin number for the CS line and spidev device node ++ creation are configurable. ++ N.B.: spi2 is only accessible with the Compute Module. ++Load: dtoverlay=spi2-1cs,= ++Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). ++ cs0_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev2.0 (default ++ is 'okay' or enabled). ++ ++ ++Name: spi2-2cs ++Info: Enables spi2 with two chip select (CS) lines and associated spidev ++ dev nodes. The gpio pin numbers for the CS lines and spidev device node ++ creation are configurable. ++ N.B.: spi2 is only accessible with the Compute Module. ++Load: dtoverlay=spi2-2cs,= ++Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). ++ cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1). ++ cs0_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev2.0 (default ++ is 'okay' or enabled). ++ cs1_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev2.1 (default ++ is 'okay' or enabled). ++ ++ ++Name: spi2-3cs ++Info: Enables spi2 with three chip select (CS) lines and associated spidev ++ dev nodes. The gpio pin numbers for the CS lines and spidev device node ++ creation are configurable. ++ N.B.: spi2 is only accessible with the Compute Module. ++Load: dtoverlay=spi2-3cs,= ++Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). ++ cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1). ++ cs2_pin GPIO pin for CS2 (default 45 - BCM SPI2_CE2). ++ cs0_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev2.0 (default ++ is 'okay' or enabled). ++ cs1_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev2.1 (default ++ is 'okay' or enabled). ++ cs2_spidev Set to 'disabled' to stop the creation of a ++ userspace device node /dev/spidev2.2 (default ++ is 'okay' or enabled). ++ ++ ++Name: tinylcd35 ++Info: 3.5" Color TFT Display by www.tinylcd.com ++ Options: Touch, RTC, keypad ++Load: dtoverlay=tinylcd35,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ touch Enable touch panel ++ ++ touchgpio Touch controller IRQ GPIO ++ ++ xohms Touchpanel: Resistance of X-plate in ohms ++ ++ rtc-pcf PCF8563 Real Time Clock ++ ++ rtc-ds DS1307 Real Time Clock ++ ++ keypad Enable keypad ++ ++ Examples: ++ Display with touchpanel, PCF8563 RTC and keypad: ++ dtoverlay=tinylcd35,touch,rtc-pcf,keypad ++ Old touch display: ++ dtoverlay=tinylcd35,touch,touchgpio=3 ++ ++ ++Name: uart1 ++Info: Enable uart1 in place of uart0 ++Load: dtoverlay=uart1,= ++Params: txd1_pin GPIO pin for TXD1 (14, 32 or 40 - default 14) ++ ++ rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15) ++ ++ ++Name: vc4-fkms-v3d ++Info: Enable Eric Anholt's DRM VC4 V3D driver on top of the dispmanx ++ display stack. ++Load: dtoverlay=vc4-fkms-v3d, ++Params: cma-256 CMA is 256MB, 256MB-aligned (needs 1GB) ++ cma-192 CMA is 192MB, 256MB-aligned (needs 1GB) ++ cma-128 CMA is 128MB, 128MB-aligned ++ cma-96 CMA is 96MB, 128MB-aligned ++ cma-64 CMA is 64MB, 64MB-aligned ++ ++ ++Name: vc4-kms-v3d ++Info: Enable Eric Anholt's DRM VC4 HDMI/HVS/V3D driver. Running startx or ++ booting to GUI while this overlay is in use will cause interesting ++ lockups. ++Load: dtoverlay=vc4-kms-v3d, ++Params: cma-256 CMA is 256MB, 256MB-aligned (needs 1GB) ++ cma-192 CMA is 192MB, 256MB-aligned (needs 1GB) ++ cma-128 CMA is 128MB, 128MB-aligned ++ cma-96 CMA is 96MB, 128MB-aligned ++ cma-64 CMA is 64MB, 64MB-aligned ++ ++ ++Name: vga666 ++Info: Overlay for the Fen Logic VGA666 board ++ This uses GPIOs 2-21 (so no I2C), and activates the output 2-3 seconds ++ after the kernel has started. ++Load: dtoverlay=vga666 ++Params: ++ ++ ++Name: w1-gpio ++Info: Configures the w1-gpio Onewire interface module. ++ Use this overlay if you *don't* need a GPIO to drive an external pullup. ++Load: dtoverlay=w1-gpio,= ++Params: gpiopin GPIO for I/O (default "4") ++ ++ pullup Non-zero, "on", or "y" to enable the parasitic ++ power (2-wire, power-on-data) feature ++ ++ ++Name: w1-gpio-pullup ++Info: Configures the w1-gpio Onewire interface module. ++ Use this overlay if you *do* need a GPIO to drive an external pullup. ++Load: dtoverlay=w1-gpio-pullup,= ++Params: gpiopin GPIO for I/O (default "4") ++ ++ pullup Non-zero, "on", or "y" to enable the parasitic ++ power (2-wire, power-on-data) feature ++ ++ extpullup GPIO for external pullup (default "5") ++ ++ ++Name: wittypi ++Info: Configures the wittypi RTC module. ++Load: dtoverlay=wittypi,= ++Params: led_gpio GPIO for LED (default "17") ++ led_trigger Choose which activity the LED tracks (default ++ "default-on") ++ ++ ++Troubleshooting ++=============== ++ ++If you are experiencing problems that you think are DT-related, enable DT ++diagnostic output by adding this to /boot/config.txt: ++ ++ dtdebug=on ++ ++and rebooting. Then run: ++ ++ sudo vcdbg log msg ++ ++and look for relevant messages. ++ ++Further reading ++=============== ++ ++This is only meant to be a quick introduction to the subject of Device Tree on ++Raspberry Pi. There is a more complete explanation here: ++ ++http://www.raspberrypi.org/documentation/configuration/device-tree.md +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts +@@ -0,0 +1,53 @@ ++// Definitions for ADAU1977 ADC ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&soc>; ++ ++ __overlay__ { ++ codec_supply: fixedregulator@0 { ++ compatible = "regulator-fixed"; ++ regulator-name = "AVDD"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c>; ++ ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ adau1977: codec@11 { ++ compatible = "adi,adau1977"; ++ reg = <0x11>; ++ reset-gpios = <&gpio 5 0>; ++ AVDD-supply = <&codec_supply>; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "adi,adau1977-adc"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/ads1015-overlay.dts +@@ -0,0 +1,98 @@ ++/* ++ * 2016 - Erik Sejr ++ */ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ /* ----------- ADS1015 ------------ */ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ads1015: ads1015 { ++ compatible = "ti,ads1015"; ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x48>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "i2c_arm/ads1015"; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ channel_a: channel_a { ++ reg = <4>; ++ ti,gain = <2>; ++ ti,datarate = <4>; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "i2c_arm/ads1015"; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ channel_b: channel_b { ++ reg = <5>; ++ ti,gain = <2>; ++ ti,datarate = <4>; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "i2c_arm/ads1015"; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ channel_c: channel_c { ++ reg = <6>; ++ ti,gain = <2>; ++ ti,datarate = <4>; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "i2c_arm/ads1015"; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ channel_d: channel_d { ++ reg = <7>; ++ ti,gain = <2>; ++ ti,datarate = <4>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ addr = <&ads1015>,"reg:0"; ++ cha_enable = <0>,"=1"; ++ cha_cfg = <&channel_a>,"reg:0"; ++ cha_gain = <&channel_a>,"ti,gain:0"; ++ cha_datarate = <&channel_a>,"ti,datarate:0"; ++ chb_enable = <0>,"=2"; ++ chb_cfg = <&channel_b>,"reg:0"; ++ chb_gain = <&channel_b>,"ti,gain:0"; ++ chb_datarate = <&channel_b>,"ti,datarate:0"; ++ chc_enable = <0>,"=3"; ++ chc_cfg = <&channel_c>,"reg:0"; ++ chc_gain = <&channel_c>,"ti,gain:0"; ++ chc_datarate = <&channel_c>,"ti,datarate:0"; ++ chd_enable = <0>,"=4"; ++ chd_cfg = <&channel_d>,"reg:0"; ++ chd_gain = <&channel_d>,"ti,gain:0"; ++ chd_datarate = <&channel_d>,"ti,datarate:0"; ++ }; ++ ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/ads7846-overlay.dts +@@ -0,0 +1,89 @@ ++/* ++ * Generic Device Tree overlay for the ADS7846 touch controller ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ ads7846_pins: ads7846_pins { ++ brcm,pins = <255>; /* illegal default value */ ++ brcm,function = <0>; /* in */ ++ brcm,pull = <0>; /* none */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ads7846: ads7846@1 { ++ compatible = "ti,ads7846"; ++ reg = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ads7846_pins>; ++ ++ spi-max-frequency = <2000000>; ++ interrupts = <255 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ pendown-gpio = <&gpio 255 0>; ++ ++ /* driver defaults */ ++ ti,x-min = /bits/ 16 <0>; ++ ti,y-min = /bits/ 16 <0>; ++ ti,x-max = /bits/ 16 <0x0FFF>; ++ ti,y-max = /bits/ 16 <0x0FFF>; ++ ti,pressure-min = /bits/ 16 <0>; ++ ti,pressure-max = /bits/ 16 <0xFFFF>; ++ ti,x-plate-ohms = /bits/ 16 <400>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ cs = <&ads7846>,"reg:0"; ++ speed = <&ads7846>,"spi-max-frequency:0"; ++ penirq = <&ads7846_pins>,"brcm,pins:0", /* REQUIRED */ ++ <&ads7846>,"interrupts:0", ++ <&ads7846>,"pendown-gpio:4"; ++ penirq_pull = <&ads7846_pins>,"brcm,pull:0"; ++ swapxy = <&ads7846>,"ti,swap-xy?"; ++ xmin = <&ads7846>,"ti,x-min;0"; ++ ymin = <&ads7846>,"ti,y-min;0"; ++ xmax = <&ads7846>,"ti,x-max;0"; ++ ymax = <&ads7846>,"ti,y-max;0"; ++ pmin = <&ads7846>,"ti,pressure-min;0"; ++ pmax = <&ads7846>,"ti,pressure-max;0"; ++ xohms = <&ads7846>,"ti,x-plate-ohms;0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts +@@ -0,0 +1,46 @@ ++// Definitions for Digital Dreamtime Akkordion using IQaudIO DAC+ or DACZero ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm5122@4c { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5122"; ++ reg = <0x4c>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ frag2: __overlay__ { ++ compatible = "iqaudio,iqaudio-dac"; ++ card_name = "Akkordion"; ++ dai_name = "IQaudIO DAC"; ++ dai_stream_name = "IQaudIO DAC HiFi"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ 24db_digital_gain = <&frag2>,"iqaudio,24db_digital_gain?"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts +@@ -0,0 +1,54 @@ ++/* ++ * Definitions for Allo Piano DAC (2.0/2.1) boards ++ * ++ * NB. The Piano DAC 2.1 board contains 2x TI PCM5142 DAC's. One DAC is stereo ++ * (left/right) and the other provides a subwoofer output, using DSP on the ++ * chip for digital high/low pass crossover. ++ * The initial support for this hardware, that doesn't require any codec driver ++ * modifications, uses only one DAC chip for stereo (left/right) output, the ++ * chip with 0x4c slave address. The other chip at 0x4d is currently ignored! ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm5142@4c { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5142"; ++ reg = <0x4c>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ piano_dac: __overlay__ { ++ compatible = "allo,piano-dac"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ 24db_digital_gain = ++ <&piano_dac>,"allo,24db_digital_gain?"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/at86rf233-overlay.dts +@@ -0,0 +1,57 @@ ++/dts-v1/; ++/plugin/; ++ ++/* Overlay for Atmel AT86RF233 IEEE 802.15.4 WPAN transceiver on spi0.0 */ ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ status = "okay"; ++ ++ lowpan0: at86rf233@0 { ++ compatible = "atmel,at86rf233"; ++ reg = <0>; ++ interrupt-parent = <&gpio>; ++ interrupts = <23 4>; /* active high */ ++ reset-gpio = <&gpio 24 1>; ++ sleep-gpio = <&gpio 25 1>; ++ spi-max-frequency = <3000000>; ++ xtal-trim = /bits/ 8 <0xf>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&gpio>; ++ __overlay__ { ++ lowpan0_pins: lowpan0_pins { ++ brcm,pins = <23 24 25>; ++ brcm,function = <0 1 1>; /* in out out */ ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ interrupt = <&lowpan0>, "interrupts:0", ++ <&lowpan0_pins>, "brcm,pins:0"; ++ reset = <&lowpan0>, "reset-gpio:4", ++ <&lowpan0_pins>, "brcm,pins:4"; ++ sleep = <&lowpan0>, "sleep-gpio:4", ++ <&lowpan0_pins>, "brcm,pins:8"; ++ speed = <&lowpan0>, "spi-max-frequency:0"; ++ trim = <&lowpan0>, "xtal-trim.0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts +@@ -0,0 +1,39 @@ ++// Definitions for audioinjector.net audio add on soundcard ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ wm8731@1a { ++ #sound-dai-cells = <0>; ++ compatible = "wlf,wm8731"; ++ reg = <0x1a>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "ai,audioinjector-pi-soundcard"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/audremap-overlay.dts +@@ -0,0 +1,19 @@ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&audio_pins>; ++ frag0: __overlay__ { ++ brcm,pins = < 12 13 >; ++ brcm,function = < 4 >; /* alt0 alt0 */ ++ }; ++ }; ++ ++ __overrides__ { ++ swap_lr = <&frag0>, "swap_lr?"; ++ enable_jack = <&frag0>, "enable_jack?"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts +@@ -0,0 +1,23 @@ ++// Definitions for BMP085/BMP180 digital barometric pressure and temperature sensors from Bosch Sensortec ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ bmp085@77 { ++ compatible = "bosch,bmp085"; ++ reg = <0x77>; ++ default-oversampling = <3>; ++ status = "okay"; ++ }; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/dht11-overlay.dts +@@ -0,0 +1,39 @@ ++/* ++ * Overlay for the DHT11/21/22 humidity/temperature sensor modules. ++ */ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ ++ dht11: dht11@0 { ++ compatible = "dht11"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&dht11_pins>; ++ gpios = <&gpio 4 0>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ dht11_pins: dht11_pins { ++ brcm,pins = <4>; ++ brcm,function = <0>; // in ++ brcm,pull = <0>; // off ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ gpiopin = <&dht11_pins>,"brcm,pins:0", ++ <&dht11>,"gpios:4"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts +@@ -0,0 +1,39 @@ ++// Definitions for Dion Audio LOCO DAC-AMP ++ ++/* ++ * PCM5242 DAC (in hardware mode) and TPA3118 AMP. ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/"; ++ __overlay__ { ++ pcm5102a-codec { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5102a"; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "dionaudio,loco-pcm5242-tpa3118"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/dpi18-overlay.dts +@@ -0,0 +1,31 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ // There is no DPI driver module, but we need a platform device ++ // node (that doesn't already use pinctrl) to hang the pinctrl ++ // reference on - leds will do ++ ++ fragment@0 { ++ target = <&leds>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&dpi18_pins>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ dpi18_pins: dpi18_pins { ++ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 ++ 12 13 14 15 16 17 18 19 20 ++ 21>; ++ brcm,function = <6>; /* alt2 */ ++ brcm,pull = <0>; /* no pull */ ++ }; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/dpi24-overlay.dts +@@ -0,0 +1,31 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ // There is no DPI driver module, but we need a platform device ++ // node (that doesn't already use pinctrl) to hang the pinctrl ++ // reference on - leds will do ++ ++ fragment@0 { ++ target = <&leds>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&dpi24_pins>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ dpi24_pins: dpi24_pins { ++ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 ++ 12 13 14 15 16 17 18 19 20 ++ 21 22 23 24 25 26 27>; ++ brcm,function = <6>; /* alt2 */ ++ brcm,pull = <0>; /* no pull */ ++ }; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/dwc-otg-overlay.dts +@@ -0,0 +1,20 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&usb>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ __overlay__ { ++ compatible = "brcm,bcm2708-usb"; ++ reg = <0x7e980000 0x10000>, ++ <0x7e006000 0x1000>; ++ interrupts = <2 0>, ++ <1 9>; ++ status = "okay"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/dwc2-overlay.dts +@@ -0,0 +1,29 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&usb>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ dwc2_usb: __overlay__ { ++ compatible = "brcm,bcm2835-usb"; ++ reg = <0x7e980000 0x10000>; ++ interrupts = <1 9>; ++ dr_mode = "otg"; ++ g-np-tx-fifo-size = <32>; ++ g-rx-fifo-size = <256>; ++ g-tx-fifo-size = <256 128 128 64 64 64 32>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ dr_mode = <&dwc2_usb>, "dr_mode"; ++ g-np-tx-fifo-size = <&dwc2_usb>,"g-np-tx-fifo-size:0"; ++ g-rx-fifo-size = <&dwc2_usb>,"g-rx-fifo-size:0"; ++ g-tx-fifo-size = <&dwc2_usb>,"g-tx-fifo-size:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/enc28j60-overlay.dts +@@ -0,0 +1,53 @@ ++// Overlay for the Microchip ENC28J60 Ethernet Controller ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ status = "okay"; ++ ++ eth1: enc28j60@0{ ++ compatible = "microchip,enc28j60"; ++ reg = <0>; /* CE0 */ ++ pinctrl-names = "default"; ++ pinctrl-0 = <ð1_pins>; ++ interrupt-parent = <&gpio>; ++ interrupts = <25 0x2>; /* falling edge */ ++ spi-max-frequency = <12000000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&gpio>; ++ __overlay__ { ++ eth1_pins: eth1_pins { ++ brcm,pins = <25>; ++ brcm,function = <0>; /* in */ ++ brcm,pull = <0>; /* none */ ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ int_pin = <ð1>, "interrupts:0", ++ <ð1_pins>, "brcm,pins:0"; ++ speed = <ð1>, "spi-max-frequency:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts +@@ -0,0 +1,47 @@ ++// Overlay for the Microchip ENC28J60 Ethernet Controller - SPI2 Compute Module ++// Interrupt pin: 39 ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&spi2>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ status = "okay"; ++ ++ eth1: enc28j60@0{ ++ compatible = "microchip,enc28j60"; ++ reg = <0>; /* CE0 */ ++ pinctrl-names = "default"; ++ pinctrl-0 = <ð1_pins>; ++ interrupt-parent = <&gpio>; ++ interrupts = <39 0x2>; /* falling edge */ ++ spi-max-frequency = <12000000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ eth1_pins: eth1_pins { ++ brcm,pins = <39>; ++ brcm,function = <0>; /* in */ ++ brcm,pull = <0>; /* none */ ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ int_pin = <ð1>, "interrupts:0", ++ <ð1_pins>, "brcm,pins:0"; ++ speed = <ð1>, "spi-max-frequency:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts +@@ -0,0 +1,44 @@ ++// Definitions for ir-gpio module ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ gpio_ir: ir-receiver { ++ compatible = "gpio-ir-receiver"; ++ ++ // pin number, high or low ++ gpios = <&gpio 18 1>; ++ ++ // parameter for keymap name ++ linux,rc-map-name = "rc-rc6-mce"; ++ ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ gpio_ir_pins: gpio_ir_pins { ++ brcm,pins = <18>; // pin 18 ++ brcm,function = <0>; // in ++ brcm,pull = <1>; // down ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ // parameters ++ gpio_pin = <&gpio_ir>,"gpios:4", ++ <&gpio_ir_pins>,"brcm,pins:0"; // pin number ++ gpio_pull = <&gpio_ir_pins>,"brcm,pull:0"; // pull-up/down state ++ ++ rc-map-name = <&gpio_ir>,"linux,rc-map-name"; // default rc map ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts +@@ -0,0 +1,34 @@ ++// Definitions for gpio-poweroff module ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ power_ctrl: power_ctrl { ++ compatible = "gpio-poweroff"; ++ gpios = <&gpio 26 0>; ++ force; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ power_ctrl_pins: power_ctrl_pins { ++ brcm,pins = <26>; ++ brcm,function = <1>; // out ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ gpiopin = <&power_ctrl>,"gpios:4", ++ <&power_ctrl_pins>,"brcm,pins:0"; ++ active_low = <&power_ctrl>,"gpios:8"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts +@@ -0,0 +1,39 @@ ++// Definitions for HiFiBerry Amp/Amp+ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ tas5713@1b { ++ #sound-dai-cells = <0>; ++ compatible = "ti,tas5713"; ++ reg = <0x1b>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "hifiberry,hifiberry-amp"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts +@@ -0,0 +1,34 @@ ++// Definitions for HiFiBerry DAC ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/"; ++ __overlay__ { ++ pcm5102a-codec { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5102a"; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "hifiberry,hifiberry-dac"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts +@@ -0,0 +1,56 @@ ++// Definitions for HiFiBerry DAC+ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/clocks"; ++ __overlay__ { ++ dacpro_osc: dacpro_osc { ++ compatible = "hifiberry,dacpro-clk"; ++ #clock-cells = <0>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm5122@4d { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5122"; ++ reg = <0x4d>; ++ clocks = <&dacpro_osc>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&sound>; ++ hifiberry_dacplus: __overlay__ { ++ compatible = "hifiberry,hifiberry-dacplus"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ 24db_digital_gain = ++ <&hifiberry_dacplus>,"hifiberry,24db_digital_gain?"; ++ slave = <&hifiberry_dacplus>,"hifiberry-dacplus,slave?"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts +@@ -0,0 +1,39 @@ ++// Definitions for HiFiBerry Digi ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ wm8804@3b { ++ #sound-dai-cells = <0>; ++ compatible = "wlf,wm8804"; ++ reg = <0x3b>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "hifiberry,hifiberry-digi"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts +@@ -0,0 +1,41 @@ ++// Definitions for HiFiBerry Digi Pro ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ wm8804@3b { ++ #sound-dai-cells = <0>; ++ compatible = "wlf,wm8804"; ++ reg = <0x3b>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "hifiberry,hifiberry-digi"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ clock44-gpio = <&gpio 5 0>; ++ clock48-gpio = <&gpio 6 0>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hy28a-overlay.dts +@@ -0,0 +1,93 @@ ++/* ++ * Device Tree overlay for HY28A display ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ hy28a_pins: hy28a_pins { ++ brcm,pins = <17 25 18>; ++ brcm,function = <0 1 1>; /* in out out */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ hy28a: hy28a@0{ ++ compatible = "ilitek,ili9320"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&hy28a_pins>; ++ ++ spi-max-frequency = <32000000>; ++ spi-cpol; ++ spi-cpha; ++ rotate = <270>; ++ bgr; ++ fps = <50>; ++ buswidth = <8>; ++ startbyte = <0x70>; ++ reset-gpios = <&gpio 25 0>; ++ led-gpios = <&gpio 18 1>; ++ debug = <0>; ++ }; ++ ++ hy28a_ts: hy28a-ts@1 { ++ compatible = "ti,ads7846"; ++ reg = <1>; ++ ++ spi-max-frequency = <2000000>; ++ interrupts = <17 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ pendown-gpio = <&gpio 17 0>; ++ ti,x-plate-ohms = /bits/ 16 <100>; ++ ti,pressure-max = /bits/ 16 <255>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ speed = <&hy28a>,"spi-max-frequency:0"; ++ rotate = <&hy28a>,"rotate:0"; ++ fps = <&hy28a>,"fps:0"; ++ debug = <&hy28a>,"debug:0"; ++ xohms = <&hy28a_ts>,"ti,x-plate-ohms;0"; ++ resetgpio = <&hy28a>,"reset-gpios:4", ++ <&hy28a_pins>, "brcm,pins:1"; ++ ledgpio = <&hy28a>,"led-gpios:4", ++ <&hy28a_pins>, "brcm,pins:2"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hy28b-overlay.dts +@@ -0,0 +1,148 @@ ++/* ++ * Device Tree overlay for HY28b display shield by Texy ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ hy28b_pins: hy28b_pins { ++ brcm,pins = <17 25 18>; ++ brcm,function = <0 1 1>; /* in out out */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ hy28b: hy28b@0{ ++ compatible = "ilitek,ili9325"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&hy28b_pins>; ++ ++ spi-max-frequency = <48000000>; ++ spi-cpol; ++ spi-cpha; ++ rotate = <270>; ++ bgr; ++ fps = <50>; ++ buswidth = <8>; ++ startbyte = <0x70>; ++ reset-gpios = <&gpio 25 0>; ++ led-gpios = <&gpio 18 1>; ++ ++ gamma = "04 1F 4 7 7 0 7 7 6 0\n0F 00 1 7 4 0 0 0 6 7"; ++ ++ init = <0x10000e7 0x0010 ++ 0x1000000 0x0001 ++ 0x1000001 0x0100 ++ 0x1000002 0x0700 ++ 0x1000003 0x1030 ++ 0x1000004 0x0000 ++ 0x1000008 0x0207 ++ 0x1000009 0x0000 ++ 0x100000a 0x0000 ++ 0x100000c 0x0001 ++ 0x100000d 0x0000 ++ 0x100000f 0x0000 ++ 0x1000010 0x0000 ++ 0x1000011 0x0007 ++ 0x1000012 0x0000 ++ 0x1000013 0x0000 ++ 0x2000032 ++ 0x1000010 0x1590 ++ 0x1000011 0x0227 ++ 0x2000032 ++ 0x1000012 0x009c ++ 0x2000032 ++ 0x1000013 0x1900 ++ 0x1000029 0x0023 ++ 0x100002b 0x000e ++ 0x2000032 ++ 0x1000020 0x0000 ++ 0x1000021 0x0000 ++ 0x2000032 ++ 0x1000050 0x0000 ++ 0x1000051 0x00ef ++ 0x1000052 0x0000 ++ 0x1000053 0x013f ++ 0x1000060 0xa700 ++ 0x1000061 0x0001 ++ 0x100006a 0x0000 ++ 0x1000080 0x0000 ++ 0x1000081 0x0000 ++ 0x1000082 0x0000 ++ 0x1000083 0x0000 ++ 0x1000084 0x0000 ++ 0x1000085 0x0000 ++ 0x1000090 0x0010 ++ 0x1000092 0x0000 ++ 0x1000093 0x0003 ++ 0x1000095 0x0110 ++ 0x1000097 0x0000 ++ 0x1000098 0x0000 ++ 0x1000007 0x0133 ++ 0x1000020 0x0000 ++ 0x1000021 0x0000 ++ 0x2000064>; ++ debug = <0>; ++ }; ++ ++ hy28b_ts: hy28b-ts@1 { ++ compatible = "ti,ads7846"; ++ reg = <1>; ++ ++ spi-max-frequency = <2000000>; ++ interrupts = <17 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ pendown-gpio = <&gpio 17 0>; ++ ti,x-plate-ohms = /bits/ 16 <100>; ++ ti,pressure-max = /bits/ 16 <255>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ speed = <&hy28b>,"spi-max-frequency:0"; ++ rotate = <&hy28b>,"rotate:0"; ++ fps = <&hy28b>,"fps:0"; ++ debug = <&hy28b>,"debug:0"; ++ xohms = <&hy28b_ts>,"ti,x-plate-ohms;0"; ++ resetgpio = <&hy28b>,"reset-gpios:4", ++ <&hy28b_pins>, "brcm,pins:1"; ++ ledgpio = <&hy28b>,"led-gpios:4", ++ <&hy28b_pins>, "brcm,pins:2"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts +@@ -0,0 +1,13 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ compatible = "brcm,bcm2708-i2c"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts +@@ -0,0 +1,43 @@ ++// Overlay for i2c_gpio bitbanging host bus. ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ i2c_gpio: i2c@0 { ++ compatible = "i2c-gpio"; ++ gpios = <&gpio 23 0 /* sda */ ++ &gpio 24 0 /* scl */ ++ >; ++ i2c-gpio,delay-us = <2>; /* ~100 kHz */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/aliases"; ++ __overlay__ { ++ i2c_gpio = "/i2c@0"; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "/__symbols__"; ++ __overlay__ { ++ i2c_gpio = "/i2c@0"; ++ }; ++ }; ++ ++ __overrides__ { ++ i2c_gpio_sda = <&i2c_gpio>,"gpios:4"; ++ i2c_gpio_scl = <&i2c_gpio>,"gpios:16"; ++ i2c_gpio_delay_us = <&i2c_gpio>,"i2c-gpio,delay-us:0"; ++ }; ++}; ++ +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c-mux-overlay.dts +@@ -0,0 +1,139 @@ ++// Umbrella I2C Mux overlay ++ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pca9542: mux@70 { ++ compatible = "nxp,pca9542"; ++ reg = <0x70>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ }; ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c_arm>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pca9545: mux@70 { ++ compatible = "nxp,pca9545"; ++ reg = <0x70>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ }; ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ }; ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ }; ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c_arm>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pca9548: mux@70 { ++ compatible = "nxp,pca9548"; ++ reg = <0x70>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ }; ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ }; ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ }; ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ }; ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ }; ++ i2c@5 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <5>; ++ }; ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ }; ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ }; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ pca9542 = <0>, "+0"; ++ pca9545 = <0>, "+1"; ++ pca9548 = <0>, "+2"; ++ ++ addr = <&pca9542>,"reg:0", ++ <&pca9545>,"reg:0", ++ <&pca9548>,"reg:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts +@@ -0,0 +1,26 @@ ++// Definitions for NXP PCA9685A I2C PWM controller on ARM I2C bus. ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pca: pca@40 { ++ compatible = "nxp,pca9685"; ++ #pwm-cells = <2>; ++ reg = <0x40>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ __overrides__ { ++ addr = <&pca>,"reg:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts +@@ -0,0 +1,83 @@ ++// Definitions for several I2C based Real Time Clocks ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ abx80x: abx80x@69 { ++ compatible = "abracon,abx80x"; ++ reg = <0x69>; ++ abracon,tc-diode = "standard"; ++ abracon,tc-resistor = <0>; ++ status = "disable"; ++ }; ++ ds1307: ds1307@68 { ++ compatible = "maxim,ds1307"; ++ reg = <0x68>; ++ status = "disable"; ++ }; ++ ds1339: ds1339@68 { ++ compatible = "dallas,ds1339"; ++ trickle-resistor-ohms = <0>; ++ reg = <0x68>; ++ status = "disable"; ++ }; ++ mcp7940x: mcp7940x@6f { ++ compatible = "microchip,mcp7940x"; ++ reg = <0x6f>; ++ status = "disable"; ++ }; ++ mcp7941x: mcp7941x@6f { ++ compatible = "microchip,mcp7941x"; ++ reg = <0x6f>; ++ status = "disable"; ++ }; ++ ds3231: ds3231@68 { ++ compatible = "maxim,ds3231"; ++ reg = <0x68>; ++ status = "disable"; ++ }; ++ pcf2127: pcf2127@51 { ++ compatible = "nxp,pcf2127"; ++ reg = <0x51>; ++ status = "disable"; ++ }; ++ pcf8523: pcf8523@68 { ++ compatible = "nxp,pcf8523"; ++ reg = <0x68>; ++ status = "disable"; ++ }; ++ pcf8563: pcf8563@51 { ++ compatible = "nxp,pcf8563"; ++ reg = <0x51>; ++ status = "disable"; ++ }; ++ }; ++ }; ++ __overrides__ { ++ abx80x = <&abx80x>,"status"; ++ ds1307 = <&ds1307>,"status"; ++ ds1339 = <&ds1339>,"status"; ++ ds3231 = <&ds3231>,"status"; ++ mcp7940x = <&mcp7940x>,"status"; ++ mcp7941x = <&mcp7941x>,"status"; ++ pcf2127 = <&pcf2127>,"status"; ++ pcf8523 = <&pcf8523>,"status"; ++ pcf8563 = <&pcf8563>,"status"; ++ trickle-diode-type = <&abx80x>,"abracon,tc-diode"; ++ trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", ++ <&abx80x>,"abracon,tc-resistor"; ++ wakeup-source = <&ds1339>,"wakeup-source?", ++ <&ds3231>,"wakeup-source?", ++ <&mcp7940x>,"wakeup-source?", ++ <&mcp7941x>,"wakeup-source?"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts +@@ -0,0 +1,34 @@ ++// Definitions for a few digital barometric pressure and temperature sensors ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ bmp085: bmp085@77 { ++ compatible = "bosch,bmp085"; ++ reg = <0x77>; ++ default-oversampling = <3>; ++ status = "disable"; ++ }; ++ ++ bmp280: bmp280@76 { ++ compatible = "bosch,bmp280"; ++ reg = <0x76>; ++ status = "disable"; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ bmp085 = <&bmp085>,"status"; ++ bmp280 = <&bmp280>,"status"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts +@@ -0,0 +1,61 @@ ++/* ++ * Device tree overlay for i2c_bcm2708, i2c0 bus ++ * ++ * Compile: ++ * dtc -@ -I dts -O dtb -o i2c0-bcm2708-overlay.dtb i2c0-bcm2708-overlay.dts ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c0_pins>; ++ frag1: __overlay__ { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c0_pins>; ++ __dormant__ { ++ brcm,pins = <28 29>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&i2c0_pins>; ++ __dormant__ { ++ brcm,pins = <44 45>; ++ brcm,function = <5>; /* alt1 */ ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&i2c0_pins>; ++ __dormant__ { ++ brcm,pins = <46 47>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ ++ __overrides__ { ++ sda0_pin = <&frag1>,"brcm,pins:0"; ++ scl0_pin = <&frag1>,"brcm,pins:4"; ++ pins_0_1 = <0>,"+1-2-3-4"; ++ pins_28_29 = <0>,"-1+2-3-4"; ++ pins_44_45 = <0>,"-1-2+3-4"; ++ pins_46_47 = <0>,"-1-2-3+4"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts +@@ -0,0 +1,37 @@ ++/* ++ * Device tree overlay for i2c_bcm2708, i2c1 bus ++ * ++ * Compile: ++ * dtc -@ -I dts -O dtb -o i2c1-bcm2708-overlay.dtb i2c1-bcm2708-overlay.dts ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c1>; ++ __overlay__ { ++ pinctrl-0 = <&i2c1_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ sda1_pin = <&i2c1_pins>,"brcm,pins:0"; ++ scl1_pin = <&i2c1_pins>,"brcm,pins:4"; ++ pin_func = <&i2c1_pins>,"brcm,function:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts +@@ -0,0 +1,18 @@ ++/* ++ * Device tree overlay to move i2s to gpio 28 to 31 on CM ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&i2s_pins>; ++ __overlay__ { ++ brcm,pins = <28 29 30 31>; ++ brcm,function = <6>; /* alt2 */ ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts +@@ -0,0 +1,43 @@ ++// Definitions for IQaudIO DAC ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm5122@4c { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5122"; ++ reg = <0x4c>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ frag2: __overlay__ { ++ compatible = "iqaudio,iqaudio-dac"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ 24db_digital_gain = <&frag2>,"iqaudio,24db_digital_gain?"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts +@@ -0,0 +1,46 @@ ++// Definitions for IQaudIO DAC+ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm5122@4c { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5122"; ++ reg = <0x4c>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ iqaudio_dac: __overlay__ { ++ compatible = "iqaudio,iqaudio-dac"; ++ i2s-controller = <&i2s>; ++ mute-gpios = <&gpio 22 0>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ 24db_digital_gain = <&iqaudio_dac>,"iqaudio,24db_digital_gain?"; ++ auto_mute_amp = <&iqaudio_dac>,"iqaudio-dac,auto-mute-amp?"; ++ unmute_amp = <&iqaudio_dac>,"iqaudio-dac,unmute-amp?"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts +@@ -0,0 +1,47 @@ ++// Definitions for IQAudIO Digi WM8804 audio board ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ wm8804@3b { ++ #sound-dai-cells = <0>; ++ compatible = "wlf,wm8804"; ++ reg = <0x3b>; ++ status = "okay"; ++ // DVDD-supply = <®_3v3>; ++ // PVDD-supply = <®_3v3>; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ wm8804_digi: __overlay__ { ++ compatible = "iqaudio,wm8804-digi"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ card_name = <&wm8804_digi>,"wm8804-digi,card-name"; ++ dai_name = <&wm8804_digi>,"wm8804-digi,dai-name"; ++ dai_stream_name = <&wm8804_digi>,"wm8804-digi,dai-stream-name"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts +@@ -0,0 +1,43 @@ ++// Definitions for JustBoom DAC ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm5122@4d { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5122"; ++ reg = <0x4d>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ frag2: __overlay__ { ++ compatible = "justboom,justboom-dac"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ 24db_digital_gain = <&frag2>,"justboom,24db_digital_gain?"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts +@@ -0,0 +1,39 @@ ++// Definitions for JustBoom Digi ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ wm8804@3b { ++ #sound-dai-cells = <0>; ++ compatible = "wlf,wm8804"; ++ reg = <0x3b>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "justboom,justboom-digi"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/lirc-rpi-overlay.dts +@@ -0,0 +1,57 @@ ++// Definitions for lirc-rpi module ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ lirc_rpi: lirc_rpi { ++ compatible = "rpi,lirc-rpi"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&lirc_pins>; ++ status = "okay"; ++ ++ // Override autodetection of IR receiver circuit ++ // (0 = active high, 1 = active low, -1 = no override ) ++ rpi,sense = <0xffffffff>; ++ ++ // Software carrier ++ // (0 = off, 1 = on) ++ rpi,softcarrier = <1>; ++ ++ // Invert output ++ // (0 = off, 1 = on) ++ rpi,invert = <0>; ++ ++ // Enable debugging messages ++ // (0 = off, 1 = on) ++ rpi,debug = <0>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ lirc_pins: lirc_pins { ++ brcm,pins = <17 18>; ++ brcm,function = <1 0>; // out in ++ brcm,pull = <0 1>; // off down ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ gpio_out_pin = <&lirc_pins>,"brcm,pins:0"; ++ gpio_in_pin = <&lirc_pins>,"brcm,pins:4"; ++ gpio_in_pull = <&lirc_pins>,"brcm,pull:4"; ++ ++ sense = <&lirc_rpi>,"rpi,sense:0"; ++ softcarrier = <&lirc_rpi>,"rpi,softcarrier:0"; ++ invert = <&lirc_rpi>,"rpi,invert:0"; ++ debug = <&lirc_rpi>,"rpi,debug:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/mcp23017-overlay.dts +@@ -0,0 +1,54 @@ ++// Definitions for MCP23017 Gpio Extender from Microchip Semiconductor ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&i2c1>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ mcp23017_pins: mcp23017_pins { ++ brcm,pins = <4>; ++ brcm,function = <0>; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp23017: mcp@20 { ++ compatible = "microchip,mcp23017"; ++ reg = <0x20>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ #interrupt-cells=<2>; ++ interrupt-parent = <&gpio>; ++ interrupts = <4 2>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ gpiopin = <&mcp23017_pins>,"brcm,pins:0", ++ <&mcp23017>,"interrupts:0"; ++ addr = <&mcp23017>,"reg:0"; ++ }; ++}; ++ +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/mcp23s17-overlay.dts +@@ -0,0 +1,732 @@ ++// Overlay for MCP23S08/17 GPIO Extenders from Microchip Semiconductor ++ ++// dtparams: ++// s08-spi--present - 4-bit integer, bitmap indicating MCP23S08 devices present on SPI, CS#. ++// s17-spi--present - 8-bit integer, bitmap indicating MCP23S17 devices present on SPI, CS#. ++// s08-spi--int-gpio - integer, enables interrupts on a single MCP23S08 device on SPI, CS#, specifies the GPIO pin to which INT output is connected. ++// s17-spi--int-gpio - integer, enables mirrored interrupts on a single MCP23S17 device on SPI, CS#, specifies the GPIO pin to which either INTA or INTB output is connected. ++// ++// If devices are present on SPI1 or SPI2, those interfaces must be enabled with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. ++// If interrupts are enabled for a device on a given CS# on a SPI bus, that device must be the only one present on that SPI bus/CS#. ++// ++// Example 1: A single MCP23S17 device on SPI0, CS#0 with its SPI addr set to 0 and INTA output connected to GPIO25: ++// dtoverlay=mcp23s17:s17-spi0-0-present=1,s17-spi0-0-int-gpio=25 ++// ++// Example 2: Two MCP23S08 devices on SPI1, CS#0 with their addrs set to 2 and 3. Three MCP23S17 devices on SPI1, CS#1 with their addrs set to 0, 1 and 7: ++// dtoverlay=spi1-2cs ++// dtoverlay=mcp23s17:s08-spi1-0-present=12,s17-spi1-1-present=131 ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ // disable spi-dev on spi0.0 ++ fragment@0 { ++ target = <&spidev0>; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ // disable spi-dev on spi0.1 ++ fragment@1 { ++ target = <&spidev1>; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ // disable spi-dev on spi1.0 ++ fragment@2 { ++ target-path = "spi1/spidev@0"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ // disable spi-dev on spi1.1 ++ fragment@3 { ++ target-path = "spi1/spidev@1"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ // disable spi-dev on spi1.2 ++ fragment@4 { ++ target-path = "spi1/spidev@2"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ // disable spi-dev on spi2.0 ++ fragment@5 { ++ target-path = "spi2/spidev@0"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ // disable spi-dev on spi2.1 ++ fragment@6 { ++ target-path = "spi2/spidev@1"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ // disable spi-dev on spi2.2 ++ fragment@7 { ++ target-path = "spi2/spidev@2"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ // enable one or more mcp23s08s on spi0.0 ++ fragment@8 { ++ target = <&spi0>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s08_00: mcp23s08@0 { ++ compatible = "microchip,mcp23s08"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi0-0-present parameter */ ++ reg = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi0-0-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s08s on spi0.1 ++ fragment@9 { ++ target = <&spi0>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s08_01: mcp23s08@1 { ++ compatible = "microchip,mcp23s08"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi0-1-present parameter */ ++ reg = <1>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi0-1-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s08s on spi1.0 ++ fragment@10 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s08_10: mcp23s08@0 { ++ compatible = "microchip,mcp23s08"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-0-present parameter */ ++ reg = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-0-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s08s on spi1.1 ++ fragment@11 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s08_11: mcp23s08@1 { ++ compatible = "microchip,mcp23s08"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-1-present parameter */ ++ reg = <1>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-1-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s08s on spi1.2 ++ fragment@12 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s08_12: mcp23s08@2 { ++ compatible = "microchip,mcp23s08"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-2-present parameter */ ++ reg = <2>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-2-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s08s on spi2.0 ++ fragment@13 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s08_20: mcp23s08@0 { ++ compatible = "microchip,mcp23s08"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-0-present parameter */ ++ reg = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-0-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s08s on spi2.1 ++ fragment@14 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s08_21: mcp23s08@1 { ++ compatible = "microchip,mcp23s08"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-1-present parameter */ ++ reg = <1>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-1-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s08s on spi2.2 ++ fragment@15 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s08_22: mcp23s08@2 { ++ compatible = "microchip,mcp23s08"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-2-present parameter */ ++ reg = <2>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-2-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s17s on spi0.0 ++ fragment@16 { ++ target = <&spi0>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s17_00: mcp23s17@0 { ++ compatible = "microchip,mcp23s17"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi0-0-present parameter */ ++ reg = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi0-0-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s17s on spi0.1 ++ fragment@17 { ++ target = <&spi0>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s17_01: mcp23s17@1 { ++ compatible = "microchip,mcp23s17"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi0-1-present parameter */ ++ reg = <1>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi0-1-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s17s on spi1.0 ++ fragment@18 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s17_10: mcp23s17@0 { ++ compatible = "microchip,mcp23s17"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-0-present parameter */ ++ reg = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-0-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s17s on spi1.1 ++ fragment@19 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s17_11: mcp23s17@1 { ++ compatible = "microchip,mcp23s17"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-1-present parameter */ ++ reg = <1>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-1-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s17s on spi1.2 ++ fragment@20 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s17_12: mcp23s17@2 { ++ compatible = "microchip,mcp23s17"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-2-present parameter */ ++ reg = <2>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-2-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s17s on spi2.0 ++ fragment@21 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s17_20: mcp23s17@0 { ++ compatible = "microchip,mcp23s17"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-0-present parameter */ ++ reg = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-0-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s17s on spi2.1 ++ fragment@22 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s17_21: mcp23s17@1 { ++ compatible = "microchip,mcp23s17"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-1-present parameter */ ++ reg = <1>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-1-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // enable one or more mcp23s17s on spi2.2 ++ fragment@23 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mcp23s17_22: mcp23s17@2 { ++ compatible = "microchip,mcp23s17"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-2-present parameter */ ++ reg = <2>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ #interrupt-cells=<2>; ++ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-2-int-gpio parameter */ ++ }; ++ }; ++ }; ++ ++ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi0.0 as a input with no pull-up/down ++ fragment@24 { ++ target = <&gpio>; ++ __dormant__ { ++ spi0_0_int_pins: spi0_0_int_pins { ++ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi0-0-int-gpio parameter */ ++ brcm,function = <0>; ++ brcm,pull = <0>; ++ }; ++ }; ++ }; ++ ++ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi0.1 as a input with no pull-up/down ++ fragment@25 { ++ target = <&gpio>; ++ __dormant__ { ++ spi0_1_int_pins: spi0_1_int_pins { ++ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi0-1-int-gpio parameter */ ++ brcm,function = <0>; ++ brcm,pull = <0>; ++ }; ++ }; ++ }; ++ ++ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.0 as a input with no pull-up/down ++ fragment@26 { ++ target = <&gpio>; ++ __dormant__ { ++ spi1_0_int_pins: spi1_0_int_pins { ++ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-0-int-gpio parameter */ ++ brcm,function = <0>; ++ brcm,pull = <0>; ++ }; ++ }; ++ }; ++ ++ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.1 as a input with no pull-up/down ++ fragment@27 { ++ target = <&gpio>; ++ __dormant__ { ++ spi1_1_int_pins: spi1_1_int_pins { ++ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-1-int-gpio parameter */ ++ brcm,function = <0>; ++ brcm,pull = <0>; ++ }; ++ }; ++ }; ++ ++ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.2 as a input with no pull-up/down ++ fragment@28 { ++ target = <&gpio>; ++ __dormant__ { ++ spi1_2_int_pins: spi1_2_int_pins { ++ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-2-int-gpio parameter */ ++ brcm,function = <0>; ++ brcm,pull = <0>; ++ }; ++ }; ++ }; ++ ++ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.0 as a input with no pull-up/down ++ fragment@29 { ++ target = <&gpio>; ++ __dormant__ { ++ spi2_0_int_pins: spi2_0_int_pins { ++ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-0-int-gpio parameter */ ++ brcm,function = <0>; ++ brcm,pull = <0>; ++ }; ++ }; ++ }; ++ ++ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.1 as a input with no pull-up/down ++ fragment@30 { ++ target = <&gpio>; ++ __dormant__ { ++ spi2_1_int_pins: spi2_1_int_pins { ++ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-1-int-gpio parameter */ ++ brcm,function = <0>; ++ brcm,pull = <0>; ++ }; ++ }; ++ }; ++ ++ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.2 as a input with no pull-up/down ++ fragment@31 { ++ target = <&gpio>; ++ __dormant__ { ++ spi2_2_int_pins: spi2_2_int_pins { ++ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-2-int-gpio parameter */ ++ brcm,function = <0>; ++ brcm,pull = <0>; ++ }; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s08 on spi0.0. ++ // Use default active low interrupt signalling. ++ fragment@32 { ++ target = <&mcp23s08_00>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s08 on spi0.1. ++ // Use default active low interrupt signalling. ++ fragment@33 { ++ target = <&mcp23s08_01>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s08 on spi1.0. ++ // Use default active low interrupt signalling. ++ fragment@34 { ++ target = <&mcp23s08_10>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s08 on spi1.1. ++ // Use default active low interrupt signalling. ++ fragment@35 { ++ target = <&mcp23s08_11>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s08 on spi1.2. ++ // Use default active low interrupt signalling. ++ fragment@36 { ++ target = <&mcp23s08_12>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s08 on spi2.0. ++ // Use default active low interrupt signalling. ++ fragment@37 { ++ target = <&mcp23s08_20>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s08 on spi2.1. ++ // Use default active low interrupt signalling. ++ fragment@38 { ++ target = <&mcp23s08_21>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s08 on spi2.2. ++ // Use default active low interrupt signalling. ++ fragment@39 { ++ target = <&mcp23s08_22>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s17 on spi0.0. ++ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. ++ // Use default active low interrupt signalling. ++ fragment@40 { ++ target = <&mcp23s17_00>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s17 on spi0.1. ++ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. ++ // Configure INTA/B outputs of mcp23s08/17 as active low. ++ fragment@41 { ++ target = <&mcp23s17_01>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s17 on spi1.0. ++ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. ++ // Configure INTA/B outputs of mcp23s08/17 as active low. ++ fragment@42 { ++ target = <&mcp23s17_10>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s17 on spi1.1. ++ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. ++ // Configure INTA/B outputs of mcp23s08/17 as active low. ++ fragment@43 { ++ target = <&mcp23s17_11>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s17 on spi1.2. ++ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. ++ // Configure INTA/B outputs of mcp23s08/17 as active low. ++ fragment@44 { ++ target = <&mcp23s17_12>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s17 on spi2.0. ++ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. ++ // Configure INTA/B outputs of mcp23s08/17 as active low. ++ fragment@45 { ++ target = <&mcp23s17_20>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s17 on spi2.1. ++ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. ++ // Configure INTA/B outputs of mcp23s08/17 as active low. ++ fragment@46 { ++ target = <&mcp23s17_21>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ }; ++ }; ++ ++ // Enable interrupts for a mcp23s17 on spi2.2. ++ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. ++ // Configure INTA/B outputs of mcp23s08/17 as active low. ++ fragment@47 { ++ target = <&mcp23s17_22>; ++ __dormant__ { ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ microchip,irq-mirror; ++ }; ++ }; ++ ++ __overrides__ { ++ s08-spi0-0-present = <0>,"+0+8", <&mcp23s08_00>,"microchip,spi-present-mask:0"; ++ s08-spi0-1-present = <0>,"+1+9", <&mcp23s08_01>,"microchip,spi-present-mask:0"; ++ s08-spi1-0-present = <0>,"+2+10", <&mcp23s08_10>,"microchip,spi-present-mask:0"; ++ s08-spi1-1-present = <0>,"+3+11", <&mcp23s08_11>,"microchip,spi-present-mask:0"; ++ s08-spi1-2-present = <0>,"+4+12", <&mcp23s08_12>,"microchip,spi-present-mask:0"; ++ s08-spi2-0-present = <0>,"+5+13", <&mcp23s08_20>,"microchip,spi-present-mask:0"; ++ s08-spi2-1-present = <0>,"+6+14", <&mcp23s08_21>,"microchip,spi-present-mask:0"; ++ s08-spi2-2-present = <0>,"+7+15", <&mcp23s08_22>,"microchip,spi-present-mask:0"; ++ s17-spi0-0-present = <0>,"+0+16", <&mcp23s17_00>,"microchip,spi-present-mask:0"; ++ s17-spi0-1-present = <0>,"+1+17", <&mcp23s17_01>,"microchip,spi-present-mask:0"; ++ s17-spi1-0-present = <0>,"+2+18", <&mcp23s17_10>,"microchip,spi-present-mask:0"; ++ s17-spi1-1-present = <0>,"+3+19", <&mcp23s17_11>,"microchip,spi-present-mask:0"; ++ s17-spi1-2-present = <0>,"+4+20", <&mcp23s17_12>,"microchip,spi-present-mask:0"; ++ s17-spi2-0-present = <0>,"+5+21", <&mcp23s17_20>,"microchip,spi-present-mask:0"; ++ s17-spi2-1-present = <0>,"+6+22", <&mcp23s17_21>,"microchip,spi-present-mask:0"; ++ s17-spi2-2-present = <0>,"+7+23", <&mcp23s17_22>,"microchip,spi-present-mask:0"; ++ s08-spi0-0-int-gpio = <0>,"+24+32", <&spi0_0_int_pins>,"brcm,pins:0", <&mcp23s08_00>,"interrupts:0"; ++ s08-spi0-1-int-gpio = <0>,"+25+33", <&spi0_1_int_pins>,"brcm,pins:0", <&mcp23s08_01>,"interrupts:0"; ++ s08-spi1-0-int-gpio = <0>,"+26+34", <&spi1_0_int_pins>,"brcm,pins:0", <&mcp23s08_10>,"interrupts:0"; ++ s08-spi1-1-int-gpio = <0>,"+27+35", <&spi1_1_int_pins>,"brcm,pins:0", <&mcp23s08_11>,"interrupts:0"; ++ s08-spi1-2-int-gpio = <0>,"+28+36", <&spi1_2_int_pins>,"brcm,pins:0", <&mcp23s08_12>,"interrupts:0"; ++ s08-spi2-0-int-gpio = <0>,"+29+37", <&spi2_0_int_pins>,"brcm,pins:0", <&mcp23s08_20>,"interrupts:0"; ++ s08-spi2-1-int-gpio = <0>,"+30+38", <&spi2_1_int_pins>,"brcm,pins:0", <&mcp23s08_21>,"interrupts:0"; ++ s08-spi2-2-int-gpio = <0>,"+31+39", <&spi2_2_int_pins>,"brcm,pins:0", <&mcp23s08_22>,"interrupts:0"; ++ s17-spi0-0-int-gpio = <0>,"+24+40", <&spi0_0_int_pins>,"brcm,pins:0", <&mcp23s17_00>,"interrupts:0"; ++ s17-spi0-1-int-gpio = <0>,"+25+41", <&spi0_1_int_pins>,"brcm,pins:0", <&mcp23s17_01>,"interrupts:0"; ++ s17-spi1-0-int-gpio = <0>,"+26+42", <&spi1_0_int_pins>,"brcm,pins:0", <&mcp23s17_10>,"interrupts:0"; ++ s17-spi1-1-int-gpio = <0>,"+27+43", <&spi1_1_int_pins>,"brcm,pins:0", <&mcp23s17_11>,"interrupts:0"; ++ s17-spi1-2-int-gpio = <0>,"+28+44", <&spi1_2_int_pins>,"brcm,pins:0", <&mcp23s17_12>,"interrupts:0"; ++ s17-spi2-0-int-gpio = <0>,"+29+45", <&spi2_0_int_pins>,"brcm,pins:0", <&mcp23s17_20>,"interrupts:0"; ++ s17-spi2-1-int-gpio = <0>,"+30+46", <&spi2_1_int_pins>,"brcm,pins:0", <&mcp23s17_21>,"interrupts:0"; ++ s17-spi2-2-int-gpio = <0>,"+31+47", <&spi2_2_int_pins>,"brcm,pins:0", <&mcp23s17_22>,"interrupts:0"; ++ }; ++}; ++ +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts +@@ -0,0 +1,73 @@ ++/* ++ * Device tree overlay for mcp251x/can0 on spi0.0 ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ /* disable spi-dev for spi0.0 */ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ /* the interrupt pin of the can-controller */ ++ fragment@2 { ++ target = <&gpio>; ++ __overlay__ { ++ can0_pins: can0_pins { ++ brcm,pins = <25>; ++ brcm,function = <0>; /* input */ ++ }; ++ }; ++ }; ++ ++ /* the clock/oscillator of the can-controller */ ++ fragment@3 { ++ target-path = "/clocks"; ++ __overlay__ { ++ /* external oscillator of mcp2515 on SPI0.0 */ ++ can0_osc: can0_osc { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <16000000>; ++ }; ++ }; ++ }; ++ ++ /* the spi config of the can-controller itself binding everything together */ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ can0: mcp2515@0 { ++ reg = <0>; ++ compatible = "microchip,mcp2515"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&can0_pins>; ++ spi-max-frequency = <10000000>; ++ interrupt-parent = <&gpio>; ++ interrupts = <25 0x2>; ++ clocks = <&can0_osc>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ oscillator = <&can0_osc>,"clock-frequency:0"; ++ spimaxfrequency = <&can0>,"spi-max-frequency:0"; ++ interrupt = <&can0_pins>,"brcm,pins:0",<&can0>,"interrupts:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts +@@ -0,0 +1,73 @@ ++/* ++ * Device tree overlay for mcp251x/can1 on spi0.1 edited by petit_miner ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ /* disable spi-dev for spi0.1 */ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ /* the interrupt pin of the can-controller */ ++ fragment@2 { ++ target = <&gpio>; ++ __overlay__ { ++ can1_pins: can1_pins { ++ brcm,pins = <25>; ++ brcm,function = <0>; /* input */ ++ }; ++ }; ++ }; ++ ++ /* the clock/oscillator of the can-controller */ ++ fragment@3 { ++ target-path = "/clocks"; ++ __overlay__ { ++ /* external oscillator of mcp2515 on spi0.1 */ ++ can1_osc: can1_osc { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <16000000>; ++ }; ++ }; ++ }; ++ ++ /* the spi config of the can-controller itself binding everything together */ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ can1: mcp2515@1 { ++ reg = <1>; ++ compatible = "microchip,mcp2515"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&can1_pins>; ++ spi-max-frequency = <10000000>; ++ interrupt-parent = <&gpio>; ++ interrupts = <25 0x2>; ++ clocks = <&can1_osc>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ oscillator = <&can1_osc>,"clock-frequency:0"; ++ spimaxfrequency = <&can1>,"spi-max-frequency:0"; ++ interrupt = <&can1_pins>,"brcm,pins:0",<&can1>,"interrupts:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/midi-uart0-overlay.dts +@@ -0,0 +1,36 @@ ++/dts-v1/; ++/plugin/; ++ ++#include ++ ++/* ++ * Fake a higher clock rate to get a larger divisor, and thereby a lower ++ * baudrate. The real clock is 48MHz, which we scale so that requesting ++ * 38.4kHz results in an actual 31.25kHz. ++ * ++ * 48000000*38400/31250 = 58982400 ++ */ ++ ++/{ ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target-path = "/clocks"; ++ __overlay__ { ++ midi_clk: midi_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-output-names = "uart0_pclk"; ++ clock-frequency = <58982400>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&uart0>; ++ __overlay__ { ++ clocks = <&midi_clk>, ++ <&clocks BCM2835_CLOCK_VPU>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/mmc-overlay.dts +@@ -0,0 +1,38 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&mmc>; ++ frag0: __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc_pins>; ++ bus-width = <4>; ++ brcm,overclock-50 = <0>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ mmc_pins: mmc_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <7>; /* alt3 */ ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sdhost>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ __overrides__ { ++ overclock_50 = <&frag0>,"brcm,overclock-50:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/mz61581-overlay.dts +@@ -0,0 +1,117 @@ ++/* ++ * Device Tree overlay for MZ61581-PI-EXT 2014.12.28 by Tontec ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ mz61581_pins: mz61581_pins { ++ brcm,pins = <4 15 18 25>; ++ brcm,function = <0 1 1 1>; /* in out out out */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mz61581: mz61581@0{ ++ compatible = "samsung,s6d02a1"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mz61581_pins>; ++ ++ spi-max-frequency = <128000000>; ++ spi-cpol; ++ spi-cpha; ++ ++ width = <320>; ++ height = <480>; ++ rotate = <270>; ++ bgr; ++ fps = <30>; ++ buswidth = <8>; ++ txbuflen = <32768>; ++ ++ reset-gpios = <&gpio 15 0>; ++ dc-gpios = <&gpio 25 0>; ++ led-gpios = <&gpio 18 0>; ++ ++ init = <0x10000b0 00 ++ 0x1000011 ++ 0x20000ff ++ 0x10000b3 0x02 0x00 0x00 0x00 ++ 0x10000c0 0x13 0x3b 0x00 0x02 0x00 0x01 0x00 0x43 ++ 0x10000c1 0x08 0x16 0x08 0x08 ++ 0x10000c4 0x11 0x07 0x03 0x03 ++ 0x10000c6 0x00 ++ 0x10000c8 0x03 0x03 0x13 0x5c 0x03 0x07 0x14 0x08 0x00 0x21 0x08 0x14 0x07 0x53 0x0c 0x13 0x03 0x03 0x21 0x00 ++ 0x1000035 0x00 ++ 0x1000036 0xa0 ++ 0x100003a 0x55 ++ 0x1000044 0x00 0x01 ++ 0x10000d0 0x07 0x07 0x1d 0x03 ++ 0x10000d1 0x03 0x30 0x10 ++ 0x10000d2 0x03 0x14 0x04 ++ 0x1000029 ++ 0x100002c>; ++ ++ /* This is a workaround to make sure the init sequence slows down and doesn't fail */ ++ debug = <3>; ++ }; ++ ++ mz61581_ts: mz61581_ts@1 { ++ compatible = "ti,ads7846"; ++ reg = <1>; ++ ++ spi-max-frequency = <2000000>; ++ interrupts = <4 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ pendown-gpio = <&gpio 4 0>; ++ ++ ti,x-plate-ohms = /bits/ 16 <60>; ++ ti,pressure-max = /bits/ 16 <255>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ speed = <&mz61581>, "spi-max-frequency:0"; ++ rotate = <&mz61581>, "rotate:0"; ++ fps = <&mz61581>, "fps:0"; ++ txbuflen = <&mz61581>, "txbuflen:0"; ++ debug = <&mz61581>, "debug:0"; ++ xohms = <&mz61581_ts>,"ti,x-plate-ohms;0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts +@@ -0,0 +1,27 @@ ++/dts-v1/; ++/plugin/; ++ ++/* Pi3 uses a GPIO expander to drive the LEDs which can only be accessed ++ from the VPU. There is a special driver for this with a separate DT node, ++ which has the unfortunate consequence of breaking the act_led_gpio and ++ act_led_activelow dtparams. ++ ++ This overlay changes the GPIO controller back to the standard one and ++ restores the dtparams. ++*/ ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&act_led>; ++ frag0: __overlay__ { ++ gpios = <&gpio 0 0>; ++ }; ++ }; ++ ++ __overrides__ { ++ gpio = <&frag0>,"gpios:4"; ++ activelow = <&frag0>,"gpios:8"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts +@@ -0,0 +1,46 @@ ++/dts-v1/; ++/plugin/; ++ ++/* Disable Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15. ++ To disable the systemd service that initialises the modem so it doesn't use ++ the UART: ++ ++ sudo systemctl disable hciuart ++*/ ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&uart1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&uart0>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&uart0_pins>; ++ __overlay__ { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "/aliases"; ++ __overlay__ { ++ serial0 = "/soc/serial@7e201000"; ++ serial1 = "/soc/serial@7e215040"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts +@@ -0,0 +1,64 @@ ++/dts-v1/; ++/plugin/; ++ ++/* Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore ++ UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum ++ usable baudrate. ++ ++ It is also necessary to edit /lib/systemd/system/hciuart.service and ++ replace ttyAMA0 with ttyS0, unless you have a system with udev rules ++ that create /dev/serial0 and /dev/serial1, in which case use /dev/serial1 ++ instead because it will always be correct. ++ ++ If cmdline.txt uses the alias serial0 to refer to the user-accessable port ++ then the firmware will replace with the appropriate port whether or not ++ this overlay is used. ++*/ ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&uart0>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&uart1>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins &bt_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&uart0_pins>; ++ __overlay__ { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&uart1_pins>; ++ __overlay__ { ++ brcm,pins = <32 33>; ++ brcm,function = <2>; /* alt5=UART1 */ ++ brcm,pull = <0 2>; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "/aliases"; ++ __overlay__ { ++ serial0 = "/soc/serial@7e201000"; ++ serial1 = "/soc/serial@7e215040"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/piscreen-overlay.dts +@@ -0,0 +1,102 @@ ++/* ++ * Device Tree overlay for PiScreen 3.5" display shield by Ozzmaker ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ piscreen_pins: piscreen_pins { ++ brcm,pins = <17 25 24 22>; ++ brcm,function = <0 1 1 1>; /* in out out out */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ piscreen: piscreen@0{ ++ compatible = "ilitek,ili9486"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&piscreen_pins>; ++ ++ spi-max-frequency = <24000000>; ++ rotate = <270>; ++ bgr; ++ fps = <30>; ++ buswidth = <8>; ++ regwidth = <16>; ++ reset-gpios = <&gpio 25 0>; ++ dc-gpios = <&gpio 24 0>; ++ led-gpios = <&gpio 22 1>; ++ debug = <0>; ++ ++ init = <0x10000b0 0x00 ++ 0x1000011 ++ 0x20000ff ++ 0x100003a 0x55 ++ 0x1000036 0x28 ++ 0x10000c2 0x44 ++ 0x10000c5 0x00 0x00 0x00 0x00 ++ 0x10000e0 0x0f 0x1f 0x1c 0x0c 0x0f 0x08 0x48 0x98 0x37 0x0a 0x13 0x04 0x11 0x0d 0x00 ++ 0x10000e1 0x0f 0x32 0x2e 0x0b 0x0d 0x05 0x47 0x75 0x37 0x06 0x10 0x03 0x24 0x20 0x00 ++ 0x10000e2 0x0f 0x32 0x2e 0x0b 0x0d 0x05 0x47 0x75 0x37 0x06 0x10 0x03 0x24 0x20 0x00 ++ 0x1000011 ++ 0x1000029>; ++ }; ++ ++ piscreen_ts: piscreen-ts@1 { ++ compatible = "ti,ads7846"; ++ reg = <1>; ++ ++ spi-max-frequency = <2000000>; ++ interrupts = <17 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ pendown-gpio = <&gpio 17 0>; ++ ti,swap-xy; ++ ti,x-plate-ohms = /bits/ 16 <100>; ++ ti,pressure-max = /bits/ 16 <255>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ speed = <&piscreen>,"spi-max-frequency:0"; ++ rotate = <&piscreen>,"rotate:0"; ++ fps = <&piscreen>,"fps:0"; ++ debug = <&piscreen>,"debug:0"; ++ xohms = <&piscreen_ts>,"ti,x-plate-ohms;0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/piscreen2r-overlay.dts +@@ -0,0 +1,106 @@ ++ /* ++ * Device Tree overlay for PiScreen2 3.5" TFT with resistive touch by Ozzmaker.com ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ piscreen2_pins: piscreen2_pins { ++ brcm,pins = <17 25 24 22>; ++ brcm,function = <0 1 1 1>; /* in out out out */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ piscreen2: piscreen2@0{ ++ compatible = "ilitek,ili9486"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&piscreen2_pins>; ++ bgr; ++ spi-max-frequency = <64000000>; ++ rotate = <90>; ++ fps = <30>; ++ buswidth = <8>; ++ regwidth = <16>; ++ txbuflen = <32768>; ++ reset-gpios = <&gpio 25 0>; ++ dc-gpios = <&gpio 24 0>; ++ led-gpios = <&gpio 22 1>; ++ debug = <0>; ++ ++ init = <0x10000b0 0x00 ++ 0x1000011 ++ 0x20000ff ++ 0x100003a 0x55 ++ 0x1000036 0x28 ++ 0x10000c0 0x11 0x09 ++ 0x10000c1 0x41 ++ 0x10000c5 0x00 0x00 0x00 0x00 ++ 0x10000b6 0x00 0x02 ++ 0x10000f7 0xa9 0x51 0x2c 0x2 ++ 0x10000be 0x00 0x04 ++ 0x10000e9 0x00 ++ 0x1000011 ++ 0x1000029>; ++ ++ }; ++ ++ piscreen2_ts: piscreen2-ts@1 { ++ compatible = "ti,ads7846"; ++ reg = <1>; ++ ++ spi-max-frequency = <2000000>; ++ interrupts = <17 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ pendown-gpio = <&gpio 17 0>; ++ ti,swap-xy; ++ ti,x-plate-ohms = /bits/ 16 <100>; ++ ti,pressure-max = /bits/ 16 <255>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ speed = <&piscreen2>,"spi-max-frequency:0"; ++ rotate = <&piscreen2>,"rotate:0"; ++ fps = <&piscreen2>,"fps:0"; ++ debug = <&piscreen2>,"debug:0"; ++ xohms = <&piscreen2_ts>,"ti,x-plate-ohms;0"; ++ }; ++}; ++ +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pisound-overlay.dts +@@ -0,0 +1,114 @@ ++/* ++ * pisound Linux kernel module. ++ * Copyright (C) 2016 Vilniaus Blokas UAB, http://blokas.io/pisound ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; version 2 of the ++ * License. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++#include ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "blokaslabs,pisound"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ ++ pinctrl-0 = <&pisound_button_pins>; ++ ++ osr-gpios = ++ <&gpio 13 GPIO_ACTIVE_HIGH>, ++ <&gpio 26 GPIO_ACTIVE_HIGH>, ++ <&gpio 16 GPIO_ACTIVE_HIGH>; ++ ++ reset-gpios = ++ <&gpio 12 GPIO_ACTIVE_HIGH>, ++ <&gpio 24 GPIO_ACTIVE_HIGH>; ++ ++ data_available-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; ++ ++ button-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pisound_button_pins>; ++ ++ pisound_button_pins: pisound_button_pins { ++ brcm,pins = <17>; ++ brcm,function = <0>; // Input ++ brcm,pull = <2>; // Pull-Up ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "/"; ++ __overlay__ { ++ pcm5102a-codec { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5102a"; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ ++ spidev@0{ ++ status = "disabled"; ++ }; ++ ++ spidev@1{ ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@5 { ++ target = <&spi0>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pisound_spi: pisound_spi@0{ ++ compatible = "blokaslabs,pisound-spi"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins>; ++ spi-max-frequency = <1000000>; ++ }; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pitft22-overlay.dts +@@ -0,0 +1,69 @@ ++/* ++ * Device Tree overlay for pitft by Adafruit ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ ++ spidev@0{ ++ status = "disabled"; ++ }; ++ ++ spidev@1{ ++ status = "disabled"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ pitft_pins: pitft_pins { ++ brcm,pins = <25>; ++ brcm,function = <1>; /* out */ ++ brcm,pull = <0>; /* none */ ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pitft: pitft@0{ ++ compatible = "ilitek,ili9340"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pitft_pins>; ++ ++ spi-max-frequency = <32000000>; ++ rotate = <90>; ++ fps = <25>; ++ bgr; ++ buswidth = <8>; ++ dc-gpios = <&gpio 25 0>; ++ debug = <0>; ++ }; ++ ++ }; ++ }; ++ ++ __overrides__ { ++ speed = <&pitft>,"spi-max-frequency:0"; ++ rotate = <&pitft>,"rotate:0"; ++ fps = <&pitft>,"fps:0"; ++ debug = <&pitft>,"debug:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts +@@ -0,0 +1,91 @@ ++/* ++ * Device Tree overlay for Adafruit PiTFT 2.8" capacitive touch screen ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&gpio>; ++ __overlay__ { ++ pitft_pins: pitft_pins { ++ brcm,pins = <24 25>; ++ brcm,function = <0 1>; /* in out */ ++ brcm,pull = <2 0>; /* pullup none */ ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pitft: pitft@0{ ++ compatible = "ilitek,ili9340"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pitft_pins>; ++ ++ spi-max-frequency = <32000000>; ++ rotate = <90>; ++ fps = <25>; ++ bgr; ++ buswidth = <8>; ++ dc-gpios = <&gpio 25 0>; ++ debug = <0>; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&i2c1>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ft6236: ft6236@38 { ++ compatible = "focaltech,ft6236"; ++ reg = <0x38>; ++ ++ interrupt-parent = <&gpio>; ++ interrupts = <24 2>; ++ touchscreen-size-x = <240>; ++ touchscreen-size-y = <320>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ speed = <&pitft>,"spi-max-frequency:0"; ++ rotate = <&pitft>,"rotate:0"; ++ fps = <&pitft>,"fps:0"; ++ debug = <&pitft>,"debug:0"; ++ touch-sizex = <&ft6236>,"touchscreen-size-x?"; ++ touch-sizey = <&ft6236>,"touchscreen-size-y?"; ++ touch-invx = <&ft6236>,"touchscreen-inverted-x?"; ++ touch-invy = <&ft6236>,"touchscreen-inverted-y?"; ++ touch-swapxy = <&ft6236>,"touchscreen-swapped-x-y?"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts +@@ -0,0 +1,121 @@ ++/* ++ * Device Tree overlay for Adafruit PiTFT 2.8" resistive touch screen ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ pitft_pins: pitft_pins { ++ brcm,pins = <24 25>; ++ brcm,function = <0 1>; /* in out */ ++ brcm,pull = <2 0>; /* pullup none */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pitft: pitft@0{ ++ compatible = "ilitek,ili9340"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pitft_pins>; ++ ++ spi-max-frequency = <32000000>; ++ rotate = <90>; ++ fps = <25>; ++ bgr; ++ buswidth = <8>; ++ dc-gpios = <&gpio 25 0>; ++ debug = <0>; ++ }; ++ ++ pitft_ts@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "st,stmpe610"; ++ reg = <1>; ++ ++ spi-max-frequency = <500000>; ++ irq-gpio = <&gpio 24 0x2>; /* IRQF_TRIGGER_FALLING */ ++ interrupts = <24 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ ++ stmpe_touchscreen { ++ compatible = "st,stmpe-ts"; ++ st,sample-time = <4>; ++ st,mod-12b = <1>; ++ st,ref-sel = <0>; ++ st,adc-freq = <2>; ++ st,ave-ctrl = <3>; ++ st,touch-det-delay = <4>; ++ st,settling = <2>; ++ st,fraction-z = <7>; ++ st,i-drive = <0>; ++ }; ++ ++ stmpe_gpio: stmpe_gpio { ++ #gpio-cells = <2>; ++ compatible = "st,stmpe-gpio"; ++ /* ++ * only GPIO2 is wired/available ++ * and it is wired to the backlight ++ */ ++ st,norequest-mask = <0x7b>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@5 { ++ target-path = "/soc"; ++ __overlay__ { ++ backlight { ++ compatible = "gpio-backlight"; ++ gpios = <&stmpe_gpio 2 0>; ++ default-on; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ speed = <&pitft>,"spi-max-frequency:0"; ++ rotate = <&pitft>,"rotate:0"; ++ fps = <&pitft>,"fps:0"; ++ debug = <&pitft>,"debug:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts +@@ -0,0 +1,121 @@ ++/* ++ * Device Tree overlay for Adafruit PiTFT 3.5" resistive touch screen ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ pitft_pins: pitft_pins { ++ brcm,pins = <24 25>; ++ brcm,function = <0 1>; /* in out */ ++ brcm,pull = <2 0>; /* pullup none */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pitft: pitft@0{ ++ compatible = "himax,hx8357d"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pitft_pins>; ++ ++ spi-max-frequency = <32000000>; ++ rotate = <90>; ++ fps = <25>; ++ bgr; ++ buswidth = <8>; ++ dc-gpios = <&gpio 25 0>; ++ debug = <0>; ++ }; ++ ++ pitft_ts@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "st,stmpe610"; ++ reg = <1>; ++ ++ spi-max-frequency = <500000>; ++ irq-gpio = <&gpio 24 0x2>; /* IRQF_TRIGGER_FALLING */ ++ interrupts = <24 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ interrupt-controller; ++ ++ stmpe_touchscreen { ++ compatible = "st,stmpe-ts"; ++ st,sample-time = <4>; ++ st,mod-12b = <1>; ++ st,ref-sel = <0>; ++ st,adc-freq = <2>; ++ st,ave-ctrl = <3>; ++ st,touch-det-delay = <4>; ++ st,settling = <2>; ++ st,fraction-z = <7>; ++ st,i-drive = <0>; ++ }; ++ ++ stmpe_gpio: stmpe_gpio { ++ #gpio-cells = <2>; ++ compatible = "st,stmpe-gpio"; ++ /* ++ * only GPIO2 is wired/available ++ * and it is wired to the backlight ++ */ ++ st,norequest-mask = <0x7b>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@5 { ++ target-path = "/soc"; ++ __overlay__ { ++ backlight { ++ compatible = "gpio-backlight"; ++ gpios = <&stmpe_gpio 2 0>; ++ default-on; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ speed = <&pitft>,"spi-max-frequency:0"; ++ rotate = <&pitft>,"rotate:0"; ++ fps = <&pitft>,"fps:0"; ++ debug = <&pitft>,"debug:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pps-gpio-overlay.dts +@@ -0,0 +1,35 @@ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ pps: pps { ++ compatible = "pps-gpio"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pps_pins>; ++ gpios = <&gpio 18 0>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ pps_pins: pps_pins { ++ brcm,pins = <18>; ++ brcm,function = <0>; // in ++ brcm,pull = <0>; // off ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ gpiopin = <&pps>,"gpios:4", ++ <&pps_pins>,"brcm,pins:0"; ++ assert_falling_edge = <&pps>,"assert-falling-edge?"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts +@@ -0,0 +1,47 @@ ++/dts-v1/; ++/plugin/; ++ ++/* ++This is the 2-channel overlay - only use it if you need both channels. ++ ++Legal pin,function combinations for each channel: ++ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) ++ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) ++ ++N.B.: ++ 1) Pin 18 is the only one available on all platforms, and ++ it is the one used by the I2S audio interface. ++ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. ++ 2) The onboard analogue audio output uses both PWM channels. ++ 3) So be careful mixing audio and PWM. ++*/ ++ ++/ { ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ pwm_pins: pwm_pins { ++ brcm,pins = <18 19>; ++ brcm,function = <2 2>; /* Alt5 */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&pwm>; ++ frag1: __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm_pins>; ++ assigned-clock-rates = <100000000>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ pin = <&pwm_pins>,"brcm,pins:0"; ++ pin2 = <&pwm_pins>,"brcm,pins:4"; ++ func = <&pwm_pins>,"brcm,function:0"; ++ func2 = <&pwm_pins>,"brcm,function:4"; ++ clock = <&frag1>,"assigned-clock-rates:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pwm-overlay.dts +@@ -0,0 +1,43 @@ ++/dts-v1/; ++/plugin/; ++ ++/* ++Legal pin,function combinations for each channel: ++ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) ++ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) ++ ++N.B.: ++ 1) Pin 18 is the only one available on all platforms, and ++ it is the one used by the I2S audio interface. ++ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. ++ 2) The onboard analogue audio output uses both PWM channels. ++ 3) So be careful mixing audio and PWM. ++*/ ++ ++/ { ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ pwm_pins: pwm_pins { ++ brcm,pins = <18>; ++ brcm,function = <2>; /* Alt5 */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&pwm>; ++ frag1: __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm_pins>; ++ assigned-clock-rates = <100000000>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ pin = <&pwm_pins>,"brcm,pins:0"; ++ func = <&pwm_pins>,"brcm,function:0"; ++ clock = <&frag1>,"assigned-clock-rates:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/qca7000-overlay.dts +@@ -0,0 +1,52 @@ ++// Overlay for the Qualcomm Atheros QCA7000 on I2SE's PLC Stamp micro EVK ++// Visit: https://www.i2se.com/product/plc-stamp-micro-evk for details ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ status = "okay"; ++ ++ spidev@0 { ++ status = "disabled"; ++ }; ++ ++ eth1: qca7000@0 { ++ compatible = "qca,qca7000"; ++ reg = <0>; /* CE0 */ ++ pinctrl-names = "default"; ++ pinctrl-0 = <ð1_pins>; ++ interrupt-parent = <&gpio>; ++ interrupts = <23 0x1>; /* rising edge */ ++ spi-max-frequency = <12000000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ eth1_pins: eth1_pins { ++ brcm,pins = <23>; ++ brcm,function = <0>; /* in */ ++ brcm,pull = <0>; /* none */ ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ int_pin = <ð1>, "interrupts:0", ++ <ð1_pins>, "brcm,pins:0"; ++ speed = <ð1>, "spi-max-frequency:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/raspidac3-overlay.dts +@@ -0,0 +1,45 @@ ++// Definitions for RaspiDACv3 ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm5122@4c { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5122"; ++ reg = <0x4c>; ++ status = "okay"; ++ }; ++ ++ tpa6130a2: tpa6130a2@60 { ++ compatible = "ti,tpa6130a2"; ++ reg = <0x60>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "jg,raspidacv3"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts +@@ -0,0 +1,21 @@ ++/* ++ * Devicetree overlay for mailbox-driven Raspberry Pi DSI Display ++ * backlight controller ++ */ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ rpi_backlight: rpi_backlight { ++ compatible = "raspberrypi,rpi-backlight"; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rpi-dac-overlay.dts +@@ -0,0 +1,34 @@ ++// Definitions for RPi DAC ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/"; ++ __overlay__ { ++ pcm1794a-codec { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm1794a"; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "rpi,rpi-dac"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rpi-display-overlay.dts +@@ -0,0 +1,89 @@ ++/* ++ * Device Tree overlay for rpi-display by Watterott ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ rpi_display_pins: rpi_display_pins { ++ brcm,pins = <18 23 24 25>; ++ brcm,function = <1 1 1 0>; /* out out out in */ ++ brcm,pull = <0 0 0 2>; /* - - - up */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ rpidisplay: rpi-display@0{ ++ compatible = "ilitek,ili9341"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&rpi_display_pins>; ++ ++ spi-max-frequency = <32000000>; ++ rotate = <270>; ++ bgr; ++ fps = <30>; ++ buswidth = <8>; ++ reset-gpios = <&gpio 23 0>; ++ dc-gpios = <&gpio 24 0>; ++ led-gpios = <&gpio 18 1>; ++ debug = <0>; ++ }; ++ ++ rpidisplay_ts: rpi-display-ts@1 { ++ compatible = "ti,ads7846"; ++ reg = <1>; ++ ++ spi-max-frequency = <2000000>; ++ interrupts = <25 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ pendown-gpio = <&gpio 25 0>; ++ ti,x-plate-ohms = /bits/ 16 <60>; ++ ti,pressure-max = /bits/ 16 <255>; ++ }; ++ }; ++ }; ++ __overrides__ { ++ speed = <&rpidisplay>,"spi-max-frequency:0"; ++ rotate = <&rpidisplay>,"rotate:0"; ++ fps = <&rpidisplay>,"fps:0"; ++ debug = <&rpidisplay>,"debug:0"; ++ xohms = <&rpidisplay_ts>,"ti,x-plate-ohms;0"; ++ swapxy = <&rpidisplay_ts>,"ti,swap-xy?"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts +@@ -0,0 +1,17 @@ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ rpi_ft5406: rpi_ft5406 { ++ compatible = "rpi,rpi-ft5406"; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rpi-proto-overlay.dts +@@ -0,0 +1,39 @@ ++// Definitions for Rpi-Proto ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ wm8731@1a { ++ #sound-dai-cells = <0>; ++ compatible = "wlf,wm8731"; ++ reg = <0x1a>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "rpi,rpi-proto"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rpi-sense-overlay.dts +@@ -0,0 +1,47 @@ ++// rpi-sense HAT ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ rpi-sense@46 { ++ compatible = "rpi,rpi-sense"; ++ reg = <0x46>; ++ keys-int-gpios = <&gpio 23 1>; ++ status = "okay"; ++ }; ++ ++ lsm9ds1-magn@1c { ++ compatible = "st,lsm9ds1-magn"; ++ reg = <0x1c>; ++ status = "okay"; ++ }; ++ ++ lsm9ds1-accel6a { ++ compatible = "st,lsm9ds1-accel"; ++ reg = <0x6a>; ++ status = "okay"; ++ }; ++ ++ lps25h-press@5c { ++ compatible = "st,lps25h-press"; ++ reg = <0x5c>; ++ status = "okay"; ++ }; ++ ++ hts221-humid@5f { ++ compatible = "st,hts221-humid"; ++ reg = <0x5f>; ++ status = "okay"; ++ }; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts +@@ -0,0 +1,81 @@ ++// Definitions for RRA DigiDAC1 Audio card ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ aliases { ++ ldo0 = &ldo0; ++ ldo1 = &ldo1; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/soc"; ++ __overlay__ { ++ ++ ldo1: ldo1 { ++ compatible = "regulator-fixed"; ++ regulator-name = "DC_5V"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-always-on; ++ }; ++ ++ ldo0: ldo0 { ++ compatible = "regulator-fixed"; ++ regulator-name = "DC_3V3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ wm8804@3b { ++ #sound-dai-cells = <0>; ++ compatible = "wlf,wm8804"; ++ reg = <0x3b>; ++ status = "okay"; ++ PVDD-supply = <&ldo0>; ++ DVDD-supply = <&ldo0>; ++ }; ++ ++ wm8742: wm8741@1a { ++ compatible = "wlf,wm8741"; ++ reg = <0x1a>; ++ status = "okay"; ++ AVDD-supply = <&ldo1>; ++ DVDD-supply = <&ldo0>; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "rra,digidac1-soundcard"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts +@@ -0,0 +1,37 @@ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ sc16is750: sc16is750@48 { ++ compatible = "nxp,sc16is750"; ++ reg = <0x48>; /* address */ ++ clocks = <&sc16is750_clk>; ++ interrupt-parent = <&gpio>; ++ interrupts = <24 2>; /* IRQ_TYPE_EDGE_FALLING */ ++ #gpio-cells = <2>; ++ ++ sc16is750_clk: sc16is750_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <14745600>; ++ }; ++ }; ++ }; ++ }; ++ ++ ++ __overrides__ { ++ int_pin = <&sc16is750>,"interrupts:0"; ++ addr = <&sc16is750>,"reg:0"; ++ }; ++ ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts +@@ -0,0 +1,61 @@ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ spi1_pins: spi1_pins { ++ brcm,pins = <19 20 21>; ++ brcm,function = <3>; /* alt4 */ ++ }; ++ ++ spi1_cs_pins: spi1_cs_pins { ++ brcm,pins = <18>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi1>; ++ frag1: __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi1_pins &spi1_cs_pins>; ++ cs-gpios = <&gpio 18 1>; ++ status = "okay"; ++ ++ sc16is752: sc16is752@0 { ++ compatible = "nxp,sc16is752"; ++ reg = <0>; /* CE0 */ ++ clocks = <&sc16is752_clk>; ++ interrupt-parent = <&gpio>; ++ interrupts = <24 2>; /* IRQ_TYPE_EDGE_FALLING */ ++ #gpio-controller; ++ #gpio-cells = <2>; ++ spi-max-frequency = <4000000>; ++ ++ sc16is752_clk: sc16is752_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <14745600>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&aux>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ int_pin = <&sc16is752>,"interrupts:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/sdhost-overlay.dts +@@ -0,0 +1,32 @@ ++/dts-v1/; ++/plugin/; ++ ++/* Provide backwards compatible aliases for the old sdhost dtparams. */ ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&sdhost>; ++ frag0: __overlay__ { ++ brcm,overclock-50 = <0>; ++ brcm,pio-limit = <1>; ++ brcm,debug-flags = <0>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&mmc>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ __overrides__ { ++ overclock_50 = <&frag0>,"brcm,overclock-50:0"; ++ force_pio = <&frag0>,"brcm,force-pio?"; ++ pio_limit = <&frag0>,"brcm,pio-limit:0"; ++ debug = <&frag0>,"brcm,debug?"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/sdio-1bit-overlay.dts +@@ -0,0 +1,36 @@ ++/* Enable 1-bit SDIO from MMC interface via GPIOs 22-25. Includes sdhost overlay. */ ++ ++/include/ "sdhost-overlay.dts" ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@3 { ++ target = <&mmc>; ++ sdio_mmc: __overlay__ { ++ compatible = "brcm,bcm2835-mmc"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ non-removable; ++ bus-width = <1>; ++ brcm,overclock-50 = <0>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&gpio>; ++ __overlay__ { ++ sdio_pins: sdio_pins { ++ brcm,pins = <22 23 24 25>; ++ brcm,function = <7 7 7 7>; /* ALT3 = SD1 */ ++ brcm,pull = <0 2 2 2>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ poll_once = <&sdio_mmc>,"non-removable?"; ++ sdio_overclock = <&sdio_mmc>,"brcm,overclock-50:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/sdio-overlay.dts +@@ -0,0 +1,36 @@ ++/* Enable SDIO from MMC interface via GPIOs 22-27. Includes sdhost overlay. */ ++ ++/include/ "sdhost-overlay.dts" ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@3 { ++ target = <&mmc>; ++ sdio_mmc: __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ non-removable; ++ bus-width = <4>; ++ brcm,overclock-50 = <0>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&gpio>; ++ __overlay__ { ++ sdio_pins: sdio_pins { ++ brcm,pins = <22 23 24 25 26 27>; ++ brcm,function = <7 7 7 7 7 7>; /* ALT3 = SD1 */ ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ poll_once = <&sdio_mmc>,"non-removable?"; ++ bus_width = <&sdio_mmc>,"bus-width:0"; ++ sdio_overclock = <&sdio_mmc>,"brcm,overclock-50:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/sdtweak-overlay.dts +@@ -0,0 +1,23 @@ ++/dts-v1/; ++/plugin/; ++ ++/* Provide backwards compatible aliases for the old sdhost dtparams. */ ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&sdhost>; ++ frag0: __overlay__ { ++ brcm,overclock-50 = <0>; ++ brcm,pio-limit = <1>; ++ }; ++ }; ++ ++ __overrides__ { ++ overclock_50 = <&frag0>,"brcm,overclock-50:0"; ++ force_pio = <&frag0>,"brcm,force-pio?"; ++ pio_limit = <&frag0>,"brcm,pio-limit:0"; ++ debug = <&frag0>,"brcm,debug?"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/smi-dev-overlay.dts +@@ -0,0 +1,18 @@ ++// Description: Overlay to enable character device interface for SMI. ++// Author: Luke Wren ++ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ fragment@0 { ++ target = <&soc>; ++ __overlay__ { ++ smi_dev { ++ compatible = "brcm,bcm2835-smi-dev"; ++ smi_handle = <&smi>; ++ status = "okay"; ++ }; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/smi-nand-overlay.dts +@@ -0,0 +1,69 @@ ++// Description: Overlay to enable NAND flash through ++// the secondary memory interface ++// Author: Luke Wren ++ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&smi>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&smi_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&soc>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ nand: flash@0 { ++ compatible = "brcm,bcm2835-smi-nand"; ++ smi_handle = <&smi>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ status = "okay"; ++ ++ partition@0 { ++ label = "stage2"; ++ // 128k ++ reg = <0 0x20000>; ++ read-only; ++ }; ++ partition@1 { ++ label = "firmware"; ++ // 16M ++ reg = <0x20000 0x1000000>; ++ read-only; ++ }; ++ partition@2 { ++ label = "root"; ++ // 2G (will need to use 64 bit for >=4G) ++ reg = <0x1020000 0x80000000>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&gpio>; ++ __overlay__ { ++ smi_pins: smi_pins { ++ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 ++ 12 13 14 15>; ++ /* Alt 1: SMI */ ++ brcm,function = <5 5 5 5 5 5 5 5 5 5 5 ++ 5 5 5 5 5>; ++ /* /CS, /WE and /OE are pulled high, as they are ++ generally active low signals */ ++ brcm,pull = <2 2 2 2 2 2 2 2 0 0 0 0 0 0 0 0>; ++ }; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/smi-overlay.dts +@@ -0,0 +1,37 @@ ++// Description: Overlay to enable the secondary memory interface peripheral ++// Author: Luke Wren ++ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&smi>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&smi_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ smi_pins: smi_pins { ++ /* Don't configure the top two address bits, as ++ these are already used as ID_SD and ID_SC */ ++ brcm,pins = <2 3 4 5 6 7 8 9 10 11 12 13 14 15 ++ 16 17 18 19 20 21 22 23 24 25>; ++ /* Alt 0: SMI */ ++ brcm,function = <5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 ++ 5 5 5 5 5 5 5 5 5>; ++ /* /CS, /WE and /OE are pulled high, as they are ++ generally active low signals */ ++ brcm,pull = <2 2 2 2 2 2 0 0 0 0 0 0 0 0 0 0 0 ++ 0 0 0 0 0 0 0>; ++ }; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts +@@ -0,0 +1,31 @@ ++/* ++ * Device tree overlay to move spi0 to gpio 35 to 39 on CM ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ cs-gpios = <&gpio 36 1>, <&gpio 35 1>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi0_cs_pins>; ++ __overlay__ { ++ brcm,pins = <36 35>; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spi0_pins>; ++ __overlay__ { ++ brcm,pins = <37 38 39>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi-rtc-overlay.dts +@@ -0,0 +1,33 @@ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&spidev0>; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi0>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ rtc-pcf2123@0 { ++ compatible = "nxp,rtc-pcf2123"; ++ spi-max-frequency = <5000000>; ++ spi-cs-high = <1>; ++ reg = <0>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ pcf2123 = <0>, "=0=1"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts +@@ -0,0 +1,26 @@ ++/* ++ * Device tree overlay to re-enable hardware CS for SPI0 ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ cs-gpios = <0>, <0>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi0_cs_pins>; ++ __overlay__ { ++ brcm,pins = <8 7>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts +@@ -0,0 +1,57 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ spi1_pins: spi1_pins { ++ brcm,pins = <19 20 21>; ++ brcm,function = <3>; /* alt4 */ ++ }; ++ ++ spi1_cs_pins: spi1_cs_pins { ++ brcm,pins = <18>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi1>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi1_pins &spi1_cs_pins>; ++ cs-gpios = <&gpio 18 1>; ++ status = "okay"; ++ ++ spidev1_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&aux>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs0_spidev = <&spidev1_0>,"status"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts +@@ -0,0 +1,69 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ spi1_pins: spi1_pins { ++ brcm,pins = <19 20 21>; ++ brcm,function = <3>; /* alt4 */ ++ }; ++ ++ spi1_cs_pins: spi1_cs_pins { ++ brcm,pins = <18 17>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi1>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi1_pins &spi1_cs_pins>; ++ cs-gpios = <&gpio 18 1>, <&gpio 17 1>; ++ status = "okay"; ++ ++ spidev1_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ ++ spidev1_1: spidev@1 { ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&aux>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs1_pin = <&spi1_cs_pins>,"brcm,pins:4", ++ <&frag1>,"cs-gpios:16"; ++ cs0_spidev = <&spidev1_0>,"status"; ++ cs1_spidev = <&spidev1_1>,"status"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts +@@ -0,0 +1,81 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ spi1_pins: spi1_pins { ++ brcm,pins = <19 20 21>; ++ brcm,function = <3>; /* alt4 */ ++ }; ++ ++ spi1_cs_pins: spi1_cs_pins { ++ brcm,pins = <18 17 16>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi1>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi1_pins &spi1_cs_pins>; ++ cs-gpios = <&gpio 18 1>, <&gpio 17 1>, <&gpio 16 1>; ++ status = "okay"; ++ ++ spidev1_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ ++ spidev1_1: spidev@1 { ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ ++ spidev1_2: spidev@2 { ++ compatible = "spidev"; ++ reg = <2>; /* CE2 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&aux>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs1_pin = <&spi1_cs_pins>,"brcm,pins:4", ++ <&frag1>,"cs-gpios:16"; ++ cs2_pin = <&spi1_cs_pins>,"brcm,pins:8", ++ <&frag1>,"cs-gpios:28"; ++ cs0_spidev = <&spidev1_0>,"status"; ++ cs1_spidev = <&spidev1_1>,"status"; ++ cs2_spidev = <&spidev1_2>,"status"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts +@@ -0,0 +1,57 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ spi2_pins: spi2_pins { ++ brcm,pins = <40 41 42>; ++ brcm,function = <3>; /* alt4 */ ++ }; ++ ++ spi2_cs_pins: spi2_cs_pins { ++ brcm,pins = <43>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi2>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi2_pins &spi2_cs_pins>; ++ cs-gpios = <&gpio 43 1>; ++ status = "okay"; ++ ++ spidev2_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&aux>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs0_spidev = <&spidev2_0>,"status"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts +@@ -0,0 +1,69 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ spi2_pins: spi2_pins { ++ brcm,pins = <40 41 42>; ++ brcm,function = <3>; /* alt4 */ ++ }; ++ ++ spi2_cs_pins: spi2_cs_pins { ++ brcm,pins = <43 44>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi2>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi2_pins &spi2_cs_pins>; ++ cs-gpios = <&gpio 43 1>, <&gpio 44 1>; ++ status = "okay"; ++ ++ spidev2_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ ++ spidev2_1: spidev@1 { ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&aux>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs1_pin = <&spi2_cs_pins>,"brcm,pins:4", ++ <&frag1>,"cs-gpios:16"; ++ cs0_spidev = <&spidev2_0>,"status"; ++ cs1_spidev = <&spidev2_1>,"status"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts +@@ -0,0 +1,81 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&gpio>; ++ __overlay__ { ++ spi2_pins: spi2_pins { ++ brcm,pins = <40 41 42>; ++ brcm,function = <3>; /* alt4 */ ++ }; ++ ++ spi2_cs_pins: spi2_cs_pins { ++ brcm,pins = <43 44 45>; ++ brcm,function = <1>; /* output */ ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi2>; ++ frag1: __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi2_pins &spi2_cs_pins>; ++ cs-gpios = <&gpio 43 1>, <&gpio 44 1>, <&gpio 45 1>; ++ status = "okay"; ++ ++ spidev2_0: spidev@0 { ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ ++ spidev2_1: spidev@1 { ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ ++ spidev2_2: spidev@2 { ++ compatible = "spidev"; ++ reg = <2>; /* CE2 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&aux>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs1_pin = <&spi2_cs_pins>,"brcm,pins:4", ++ <&frag1>,"cs-gpios:16"; ++ cs2_pin = <&spi2_cs_pins>,"brcm,pins:8", ++ <&frag1>,"cs-gpios:28"; ++ cs0_spidev = <&spidev2_0>,"status"; ++ cs1_spidev = <&spidev2_1>,"status"; ++ cs2_spidev = <&spidev2_2>,"status"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts +@@ -0,0 +1,224 @@ ++/* ++ * tinylcd35-overlay.dts ++ * ++ * ------------------------------------------------- ++ * www.tinlylcd.com ++ * ------------------------------------------------- ++ * Device---Driver-----BUS GPIO's ++ * display tinylcd35 spi0.0 25 24 18 ++ * touch ads7846 spi0.1 5 ++ * rtc ds1307 i2c1-0068 ++ * rtc pcf8563 i2c1-0051 ++ * keypad gpio-keys --------- 17 22 27 23 28 ++ * ++ * ++ * TinyLCD.com 3.5 inch TFT ++ * ++ * Version 001 ++ * 5/3/2015 -- Noralf Trønnes Initial Device tree framework ++ * 10/3/2015 -- tinylcd@gmail.com added ds1307 support. ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ tinylcd35_pins: tinylcd35_pins { ++ brcm,pins = <25 24 18>; ++ brcm,function = <1>; /* out */ ++ }; ++ tinylcd35_ts_pins: tinylcd35_ts_pins { ++ brcm,pins = <5>; ++ brcm,function = <0>; /* in */ ++ }; ++ keypad_pins: keypad_pins { ++ brcm,pins = <4 17 22 23 27>; ++ brcm,function = <0>; /* in */ ++ brcm,pull = <1>; /* down */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ tinylcd35: tinylcd35@0{ ++ compatible = "neosec,tinylcd"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&tinylcd35_pins>, ++ <&tinylcd35_ts_pins>; ++ ++ spi-max-frequency = <48000000>; ++ rotate = <270>; ++ fps = <20>; ++ bgr; ++ buswidth = <8>; ++ reset-gpios = <&gpio 25 0>; ++ dc-gpios = <&gpio 24 0>; ++ led-gpios = <&gpio 18 1>; ++ debug = <0>; ++ ++ init = <0x10000B0 0x80 ++ 0x10000C0 0x0A 0x0A ++ 0x10000C1 0x01 0x01 ++ 0x10000C2 0x33 ++ 0x10000C5 0x00 0x42 0x80 ++ 0x10000B1 0xD0 0x11 ++ 0x10000B4 0x02 ++ 0x10000B6 0x00 0x22 0x3B ++ 0x10000B7 0x07 ++ 0x1000036 0x58 ++ 0x10000F0 0x36 0xA5 0xD3 ++ 0x10000E5 0x80 ++ 0x10000E5 0x01 ++ 0x10000B3 0x00 ++ 0x10000E5 0x00 ++ 0x10000F0 0x36 0xA5 0x53 ++ 0x10000E0 0x00 0x35 0x33 0x00 0x00 0x00 0x00 0x35 0x33 0x00 0x00 0x00 ++ 0x100003A 0x55 ++ 0x1000011 ++ 0x2000001 ++ 0x1000029>; ++ }; ++ ++ tinylcd35_ts: tinylcd35_ts@1 { ++ compatible = "ti,ads7846"; ++ reg = <1>; ++ status = "disabled"; ++ ++ spi-max-frequency = <2000000>; ++ interrupts = <5 2>; /* high-to-low edge triggered */ ++ interrupt-parent = <&gpio>; ++ pendown-gpio = <&gpio 5 0>; ++ ti,x-plate-ohms = /bits/ 16 <100>; ++ ti,pressure-max = /bits/ 16 <255>; ++ }; ++ }; ++ }; ++ ++ /* RTC */ ++ ++ fragment@5 { ++ target = <&i2c1>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ status = "okay"; ++ ++ pcf8563: pcf8563@51 { ++ compatible = "nxp,pcf8563"; ++ reg = <0x51>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@6 { ++ target = <&i2c1>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ status = "okay"; ++ ++ ds1307: ds1307@68 { ++ compatible = "maxim,ds1307"; ++ reg = <0x68>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ /* ++ * Values for input event code is found under the ++ * 'Keys and buttons' heading in include/uapi/linux/input.h ++ */ ++ fragment@7 { ++ target-path = "/soc"; ++ __overlay__ { ++ keypad: keypad { ++ compatible = "gpio-keys"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&keypad_pins>; ++ status = "disabled"; ++ autorepeat; ++ ++ button@17 { ++ label = "GPIO KEY_UP"; ++ linux,code = <103>; ++ gpios = <&gpio 17 0>; ++ }; ++ button@22 { ++ label = "GPIO KEY_DOWN"; ++ linux,code = <108>; ++ gpios = <&gpio 22 0>; ++ }; ++ button@27 { ++ label = "GPIO KEY_LEFT"; ++ linux,code = <105>; ++ gpios = <&gpio 27 0>; ++ }; ++ button@23 { ++ label = "GPIO KEY_RIGHT"; ++ linux,code = <106>; ++ gpios = <&gpio 23 0>; ++ }; ++ button@4 { ++ label = "GPIO KEY_ENTER"; ++ linux,code = <28>; ++ gpios = <&gpio 4 0>; ++ }; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ speed = <&tinylcd35>,"spi-max-frequency:0"; ++ rotate = <&tinylcd35>,"rotate:0"; ++ fps = <&tinylcd35>,"fps:0"; ++ debug = <&tinylcd35>,"debug:0"; ++ touch = <&tinylcd35_ts>,"status"; ++ touchgpio = <&tinylcd35_ts_pins>,"brcm,pins:0", ++ <&tinylcd35_ts>,"interrupts:0", ++ <&tinylcd35_ts>,"pendown-gpio:4"; ++ xohms = <&tinylcd35_ts>,"ti,x-plate-ohms;0"; ++ rtc-pcf = <0>,"=5"; ++ rtc-ds = <0>,"=6"; ++ keypad = <&keypad>,"status"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/uart1-overlay.dts +@@ -0,0 +1,38 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&uart1>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ uart1_pins: uart1_pins { ++ brcm,pins = <14 15>; ++ brcm,function = <2>; /* alt5 */ ++ brcm,pull = <0 2>; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "/chosen"; ++ __overlay__ { ++ bootargs = "8250.nr_uarts=1"; ++ }; ++ }; ++ ++ __overrides__ { ++ txd1_pin = <&uart1_pins>,"brcm,pins:0"; ++ rxd1_pin = <&uart1_pins>,"brcm,pins:4"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts +@@ -0,0 +1,89 @@ ++/* ++ * vc4-fkms-v3d-overlay.dts ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target-path = "/chosen"; ++ __overlay__ { ++ bootargs = "cma=256M@256M"; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/chosen"; ++ __dormant__ { ++ bootargs = "cma=192M@256M"; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "/chosen"; ++ __dormant__ { ++ bootargs = "cma=128M@128M"; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "/chosen"; ++ __dormant__ { ++ bootargs = "cma=96M@128M"; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "/chosen"; ++ __dormant__ { ++ bootargs = "cma=64M@64M"; ++ }; ++ }; ++ ++ fragment@5 { ++ target = <&fb>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@6 { ++ target = <&firmwarekms>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@7 { ++ target = <&v3d>; ++ __overlay__ { ++ interrupts = <1 10>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@8 { ++ target = <&gpu>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@9 { ++ target-path = "/soc/dma"; ++ __overlay__ { ++ brcm,dma-channel-mask = <0x7f35>; ++ }; ++ }; ++ ++ __overrides__ { ++ cma-256 = <0>,"+0-1-2-3-4"; ++ cma-192 = <0>,"-0+1-2-3-4"; ++ cma-128 = <0>,"-0-1+2-3-4"; ++ cma-96 = <0>,"-0-1-2+3-4"; ++ cma-64 = <0>,"-0-1-2-3+4"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts +@@ -0,0 +1,136 @@ ++/* ++ * vc4-kms-v3d-overlay.dts ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target-path = "/chosen"; ++ __overlay__ { ++ bootargs = "cma=256M@256M"; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/chosen"; ++ __dormant__ { ++ bootargs = "cma=192M@256M"; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "/chosen"; ++ __dormant__ { ++ bootargs = "cma=128M@128M"; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "/chosen"; ++ __dormant__ { ++ bootargs = "cma=96M@128M"; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "/chosen"; ++ __dormant__ { ++ bootargs = "cma=64M@64M"; ++ }; ++ }; ++ ++ fragment@5 { ++ target = <&i2c2>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@6 { ++ target = <&cprman>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@7 { ++ target = <&fb>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@8 { ++ target = <&pixelvalve0>; ++ __overlay__ { ++ interrupts = <2 13>; /* pwa0 */ ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@9 { ++ target = <&pixelvalve1>; ++ __overlay__ { ++ interrupts = <2 14>; /* pwa1 */ ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@10 { ++ target = <&pixelvalve2>; ++ __overlay__ { ++ interrupts = <2 10>; /* pixelvalve */ ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@11 { ++ target = <&hvs>; ++ __overlay__ { ++ interrupts = <2 1>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@12 { ++ target = <&hdmi>; ++ __overlay__ { ++ interrupts = <2 8>, <2 9>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@13 { ++ target = <&v3d>; ++ __overlay__ { ++ interrupts = <1 10>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@14 { ++ target = <&gpu>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@15 { ++ target-path = "/soc/dma"; ++ __overlay__ { ++ brcm,dma-channel-mask = <0x7f35>; ++ }; ++ }; ++ ++ __overrides__ { ++ cma-256 = <0>,"+0-1-2-3-4"; ++ cma-192 = <0>,"-0+1-2-3-4"; ++ cma-128 = <0>,"-0-1+2-3-4"; ++ cma-96 = <0>,"-0-1-2+3-4"; ++ cma-64 = <0>,"-0-1-2-3+4"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/vga666-overlay.dts +@@ -0,0 +1,30 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ // There is no VGA driver module, but we need a platform device ++ // node (that doesn't already use pinctrl) to hang the pinctrl ++ // reference on - leds will do ++ ++ fragment@0 { ++ target = <&leds>; ++ __overlay__ { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vga666_pins>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ vga666_pins: vga666_pins { ++ brcm,pins = <2 3 4 5 6 7 8 9 10 11 12 ++ 13 14 15 16 17 18 19 20 21>; ++ brcm,function = <6>; /* alt2 */ ++ brcm,pull = <0>; /* no pull */ ++ }; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts +@@ -0,0 +1,39 @@ ++// Definitions for w1-gpio module (without external pullup) ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ ++ w1: onewire@0 { ++ compatible = "w1-gpio"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&w1_pins>; ++ gpios = <&gpio 4 0>; ++ rpi,parasitic-power = <0>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ w1_pins: w1_pins { ++ brcm,pins = <4>; ++ brcm,function = <0>; // in (initially) ++ brcm,pull = <0>; // off ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ gpiopin = <&w1>,"gpios:4", ++ <&w1_pins>,"brcm,pins:0"; ++ pullup = <&w1>,"rpi,parasitic-power:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts +@@ -0,0 +1,41 @@ ++// Definitions for w1-gpio module (with external pullup) ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target-path = "/"; ++ __overlay__ { ++ ++ w1: onewire@0 { ++ compatible = "w1-gpio"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&w1_pins>; ++ gpios = <&gpio 4 0>, <&gpio 5 1>; ++ rpi,parasitic-power = <0>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ w1_pins: w1_pins { ++ brcm,pins = <4 5>; ++ brcm,function = <0 1>; // in out ++ brcm,pull = <0 0>; // off off ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ gpiopin = <&w1>,"gpios:4", ++ <&w1_pins>,"brcm,pins:0"; ++ extpullup = <&w1>,"gpios:16", ++ <&w1_pins>,"brcm,pins:4"; ++ pullup = <&w1>,"rpi,parasitic-power:0"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/wittypi-overlay.dts +@@ -0,0 +1,44 @@ ++/* ++ * Device Tree overlay for Witty Pi extension board by UUGear ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&leds>; ++ __overlay__ { ++ compatible = "gpio-leds"; ++ wittypi_led: wittypi_led { ++ label = "wittypi_led"; ++ linux,default-trigger = "default-on"; ++ gpios = <&gpio 17 0>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ rtc: ds1337@68 { ++ compatible = "dallas,ds1337"; ++ reg = <0x68>; ++ wakeup-source; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ led_gpio = <&wittypi_led>,"gpios:4"; ++ led_trigger = <&wittypi_led>,"linux,default-trigger"; ++ }; ++ ++}; +--- a/scripts/Makefile.dtbinst ++++ b/scripts/Makefile.dtbinst +@@ -27,6 +27,7 @@ ifeq ("$(dtbinst-root)", "$(obj)") + endif + + dtbinst-files := $(dtb-y) ++dtboinst-files := $(dtbo-y) + dtbinst-dirs := $(dts-dirs) + + # Helper targets for Installing DTBs into the boot directory +@@ -35,15 +36,18 @@ quiet_cmd_dtb_install = INSTALL $< + + install-dir = $(patsubst $(dtbinst-root)%,$(INSTALL_DTBS_PATH)%,$(obj)) + +-$(dtbinst-files) $(dtbinst-dirs): | __dtbs_install_prep ++$(dtbinst-files) $(dtboinst-files) $(dtbinst-dirs): | __dtbs_install_prep + + $(dtbinst-files): %.dtb: $(obj)/%.dtb + $(call cmd,dtb_install,$(install-dir)) + ++$(dtboinst-files): %.dtbo: $(obj)/%.dtbo ++ $(call cmd,dtb_install,$(install-dir)) ++ + $(dtbinst-dirs): + $(Q)$(MAKE) $(dtbinst)=$(obj)/$@ + +-PHONY += $(dtbinst-files) $(dtbinst-dirs) +-__dtbs_install: $(dtbinst-files) $(dtbinst-dirs) ++PHONY += $(dtbinst-files) $(dtboinst-files) $(dtbinst-dirs) ++__dtbs_install: $(dtbinst-files) $(dtboinst-files) $(dtbinst-dirs) + + .PHONY: $(PHONY) +--- a/scripts/Makefile.lib ++++ b/scripts/Makefile.lib +@@ -312,6 +312,17 @@ cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \ + $(obj)/%.dtb: $(src)/%.dts FORCE + $(call if_changed_dep,dtc) + ++quiet_cmd_dtco = DTCO $@ ++cmd_dtco = mkdir -p $(dir ${dtc-tmp}) ; \ ++ $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ ++ $(DTC) -@ -H epapr -O dtb -o $@ -b 0 \ ++ -i $(dir $<) $(DTC_FLAGS) \ ++ -d $(depfile).dtc.tmp $(dtc-tmp) ; \ ++ cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) ++ ++$(obj)/%.dtbo: $(src)/%-overlay.dts FORCE ++ $(call if_changed_dep,dtco) ++ + dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) + + # Bzip2 diff --git a/target/linux/brcm2708/patches-4.9/950-0055-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch b/target/linux/brcm2708/patches-4.9/950-0055-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch new file mode 100644 index 000000000000..725ac70e4418 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0055-BCM270x_DT-Add-pwr_led-and-the-required-input-trigge.patch @@ -0,0 +1,166 @@ +From 766357a4f8476461035dcfe2c6b43f532366f533 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 6 Feb 2015 13:50:57 +0000 +Subject: [PATCH] BCM270x_DT: Add pwr_led, and the required "input" trigger + +The "input" trigger makes the associated GPIO an input. This is to support +the Raspberry Pi PWR LED, which is driven by external hardware in normal use. + +N.B. pwr_led is not available on Model A or B boards. + +leds-gpio: Implement the brightness_get method + +The power LED uses some clever logic that means it is driven +by a voltage measuring circuit when configured as input, otherwise +it is driven by the GPIO output value. This patch wires up the +brightness_get method for leds-gpio so that user-space can monitor +the LED value via /sys/class/gpio/led1/brightness. Using the input +trigger this returns an indication of the system power health, +otherwise it is just whatever value the trigger has written most +recently. + +See: https://github.com/raspberrypi/linux/issues/1064 +--- + drivers/leds/leds-gpio.c | 18 +++++++++++- + drivers/leds/trigger/Kconfig | 7 +++++ + drivers/leds/trigger/Makefile | 1 + + drivers/leds/trigger/ledtrig-input.c | 54 ++++++++++++++++++++++++++++++++++++ + include/linux/leds.h | 3 ++ + 5 files changed, 82 insertions(+), 1 deletion(-) + create mode 100644 drivers/leds/trigger/ledtrig-input.c + +--- a/drivers/leds/leds-gpio.c ++++ b/drivers/leds/leds-gpio.c +@@ -50,8 +50,15 @@ static void gpio_led_set(struct led_clas + led_dat->platform_gpio_blink_set(led_dat->gpiod, level, + NULL, NULL); + led_dat->blinking = 0; ++ } else if (led_dat->cdev.flags & SET_GPIO_INPUT) { ++ gpiod_direction_input(led_dat->gpiod); ++ led_dat->cdev.flags &= ~SET_GPIO_INPUT; ++ } else if (led_dat->cdev.flags & SET_GPIO_OUTPUT) { ++ gpiod_direction_output(led_dat->gpiod, level); ++ led_dat->cdev.flags &= ~SET_GPIO_OUTPUT; + } else { +- if (led_dat->can_sleep) ++ if (led_dat->can_sleep || ++ (led_dat->cdev.flags & (SET_GPIO_INPUT | SET_GPIO_OUTPUT) )) + gpiod_set_value_cansleep(led_dat->gpiod, level); + else + gpiod_set_value(led_dat->gpiod, level); +@@ -65,6 +72,13 @@ static int gpio_led_set_blocking(struct + return 0; + } + ++static enum led_brightness gpio_led_get(struct led_classdev *led_cdev) ++{ ++ struct gpio_led_data *led_dat = ++ container_of(led_cdev, struct gpio_led_data, cdev); ++ return gpiod_get_value_cansleep(led_dat->gpiod) ? LED_FULL : LED_OFF; ++} ++ + static int gpio_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, unsigned long *delay_off) + { +@@ -122,6 +136,8 @@ static int create_gpio_led(const struct + led_dat->platform_gpio_blink_set = blink_set; + led_dat->cdev.blink_set = gpio_blink_set; + } ++ led_dat->cdev.brightness_set = gpio_led_set; ++ led_dat->cdev.brightness_get = gpio_led_get; + if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP) { + state = gpiod_get_value_cansleep(led_dat->gpiod); + if (state < 0) +--- a/drivers/leds/trigger/Kconfig ++++ b/drivers/leds/trigger/Kconfig +@@ -116,6 +116,13 @@ config LEDS_TRIGGER_CAMERA + This enables direct flash/torch on/off by the driver, kernel space. + If unsure, say Y. + ++config LEDS_TRIGGER_INPUT ++ tristate "LED Input Trigger" ++ depends on LEDS_TRIGGERS ++ help ++ This allows the GPIOs assigned to be LEDs to be initialised to inputs. ++ If unsure, say Y. ++ + config LEDS_TRIGGER_PANIC + bool "LED Panic Trigger" + depends on LEDS_TRIGGERS +--- a/drivers/leds/trigger/Makefile ++++ b/drivers/leds/trigger/Makefile +@@ -9,4 +9,5 @@ obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtr + obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o + obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) += ledtrig-transient.o + obj-$(CONFIG_LEDS_TRIGGER_CAMERA) += ledtrig-camera.o ++obj-$(CONFIG_LEDS_TRIGGER_INPUT) += ledtrig-input.o + obj-$(CONFIG_LEDS_TRIGGER_PANIC) += ledtrig-panic.o +--- /dev/null ++++ b/drivers/leds/trigger/ledtrig-input.c +@@ -0,0 +1,54 @@ ++/* ++ * Set LED GPIO to Input "Trigger" ++ * ++ * Copyright 2015 Phil Elwell ++ * ++ * Based on Nick Forbes's ledtrig-default-on.c. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include "../leds.h" ++ ++static void input_trig_activate(struct led_classdev *led_cdev) ++{ ++ led_cdev->flags |= SET_GPIO_INPUT; ++ led_set_brightness(led_cdev, 0); ++} ++ ++static void input_trig_deactivate(struct led_classdev *led_cdev) ++{ ++ led_cdev->flags |= SET_GPIO_OUTPUT; ++ led_set_brightness(led_cdev, 0); ++} ++ ++static struct led_trigger input_led_trigger = { ++ .name = "input", ++ .activate = input_trig_activate, ++ .deactivate = input_trig_deactivate, ++}; ++ ++static int __init input_trig_init(void) ++{ ++ return led_trigger_register(&input_led_trigger); ++} ++ ++static void __exit input_trig_exit(void) ++{ ++ led_trigger_unregister(&input_led_trigger); ++} ++ ++module_init(input_trig_init); ++module_exit(input_trig_exit); ++ ++MODULE_AUTHOR("Phil Elwell "); ++MODULE_DESCRIPTION("Set LED GPIO to Input \"trigger\""); ++MODULE_LICENSE("GPL"); +--- a/include/linux/leds.h ++++ b/include/linux/leds.h +@@ -52,6 +52,9 @@ struct led_classdev { + #define LED_DEV_CAP_FLASH (1 << 24) + #define LED_HW_PLUGGABLE (1 << 25) + #define LED_PANIC_INDICATOR (1 << 26) ++ /* Additions for Raspberry Pi PWR LED */ ++#define SET_GPIO_INPUT (1 << 30) ++#define SET_GPIO_OUTPUT (1 << 31) + + /* Set LED brightness level + * Must not sleep. Use brightness_set_blocking for drivers diff --git a/target/linux/brcm2708/patches-4.9/950-0056-fbdev-add-FBIOCOPYAREA-ioctl.patch b/target/linux/brcm2708/patches-4.9/950-0056-fbdev-add-FBIOCOPYAREA-ioctl.patch new file mode 100644 index 000000000000..34346903da6f --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0056-fbdev-add-FBIOCOPYAREA-ioctl.patch @@ -0,0 +1,248 @@ +From 65422160b21224e6d26641a4c1fa3082c0281488 Mon Sep 17 00:00:00 2001 +From: Siarhei Siamashka +Date: Mon, 17 Jun 2013 13:32:11 +0300 +Subject: [PATCH] fbdev: add FBIOCOPYAREA ioctl + +Based on the patch authored by Ali Gholami Rudi at + https://lkml.org/lkml/2009/7/13/153 + +Provide an ioctl for userspace applications, but only if this operation +is hardware accelerated (otherwide it does not make any sense). + +Signed-off-by: Siarhei Siamashka + +bcm2708_fb: Add ioctl for reading gpu memory through dma +--- + drivers/video/fbdev/bcm2708_fb.c | 109 +++++++++++++++++++++++++++++++++++++++ + drivers/video/fbdev/core/fbmem.c | 36 +++++++++++++ + include/uapi/linux/fb.h | 12 +++++ + 3 files changed, 157 insertions(+) + +--- a/drivers/video/fbdev/bcm2708_fb.c ++++ b/drivers/video/fbdev/bcm2708_fb.c +@@ -31,8 +31,10 @@ + #include + #include + #include ++#include + #include + #include ++#include + #include + + //#define BCM2708_FB_DEBUG +@@ -426,6 +428,110 @@ static int bcm2708_fb_pan_display(struct + return result; + } + ++static void dma_memcpy(struct bcm2708_fb *fb, dma_addr_t dst, dma_addr_t src, int size) ++{ ++ int burst_size = (fb->dma_chan == 0) ? 8 : 2; ++ struct bcm2708_dma_cb *cb = fb->cb_base; ++ ++ cb->info = BCM2708_DMA_BURST(burst_size) | BCM2708_DMA_S_WIDTH | ++ BCM2708_DMA_S_INC | BCM2708_DMA_D_WIDTH | ++ BCM2708_DMA_D_INC; ++ cb->dst = dst; ++ cb->src = src; ++ cb->length = size; ++ cb->stride = 0; ++ cb->pad[0] = 0; ++ cb->pad[1] = 0; ++ cb->next = 0; ++ ++ if (size < dma_busy_wait_threshold) { ++ bcm_dma_start(fb->dma_chan_base, fb->cb_handle); ++ bcm_dma_wait_idle(fb->dma_chan_base); ++ } else { ++ void __iomem *dma_chan = fb->dma_chan_base; ++ cb->info |= BCM2708_DMA_INT_EN; ++ bcm_dma_start(fb->dma_chan_base, fb->cb_handle); ++ while (bcm_dma_is_busy(dma_chan)) { ++ wait_event_interruptible( ++ fb->dma_waitq, ++ !bcm_dma_is_busy(dma_chan)); ++ } ++ fb->stats.dma_irqs++; ++ } ++ fb->stats.dma_copies++; ++} ++ ++#define INTALIAS_NORMAL(x) ((x)&~0xc0000000) // address with no aliases ++#define INTALIAS_L1L2_NONALLOCATING(x) (((x)&~0xc0000000)|0x80000000) // cache coherent but non-allocating in L1 and L2 ++ ++static long vc_mem_copy(struct bcm2708_fb *fb, unsigned long arg) ++{ ++ struct fb_dmacopy ioparam; ++ size_t size = PAGE_SIZE; ++ u32 *buf = NULL; ++ dma_addr_t bus_addr; ++ long rc = 0; ++ size_t offset; ++ struct { u32 base, length; } gpu = {}; ++ ++ /* restrict this to root user */ ++ if (!uid_eq(current_euid(), GLOBAL_ROOT_UID)) ++ { ++ rc = -EFAULT; ++ goto out; ++ } ++ ++ /* Get the parameter data. ++ */ ++ if (copy_from_user ++ (&ioparam, (void *)arg, sizeof(ioparam)) != 0) { ++ pr_err("[%s]: failed to copy-from-user\n", ++ __func__); ++ rc = -EFAULT; ++ goto out; ++ } ++ ++ rc = rpi_firmware_property(fb->fw, ++ RPI_FIRMWARE_GET_VC_MEMORY, ++ &gpu, sizeof(gpu)); ++ if (rc != 0 || gpu.base == 0 || gpu.length == 0) { ++ pr_err("[%s]: Unable to determine gpu memory %ld,%x,%x)\n", __func__, rc, gpu.base, gpu.length); ++ return -EFAULT; ++ } ++ ++ if (INTALIAS_NORMAL(ioparam.src) < gpu.base || INTALIAS_NORMAL(ioparam.src) >= gpu.base + gpu.length) { ++ pr_err("[%s]: Invalid memory access %x (%x-%x)", __func__, INTALIAS_NORMAL(ioparam.src), gpu.base, gpu.base + gpu.length); ++ return -EFAULT; ++ } ++ ++ buf = dma_alloc_coherent(fb->fb.device, PAGE_ALIGN(size), &bus_addr, ++ GFP_ATOMIC); ++ if (!buf) { ++ pr_err("[%s]: failed to dma_alloc_coherent(%d)\n", ++ __func__, size); ++ rc = -ENOMEM; ++ goto out; ++ } ++ ++ for (offset = 0; offset < ioparam.length; offset += size) { ++ size_t remaining = ioparam.length - offset; ++ size_t s = min(size, remaining); ++ unsigned char *p = (unsigned char *)ioparam.src + offset; ++ unsigned char *q = (unsigned char *)ioparam.dst + offset; ++ dma_memcpy(fb, bus_addr, INTALIAS_L1L2_NONALLOCATING((dma_addr_t)p), size); ++ if (copy_to_user(q, buf, s) != 0) { ++ pr_err("[%s]: failed to copy-to-user\n", ++ __func__); ++ rc = -EFAULT; ++ goto out; ++ } ++ } ++out: ++ if (buf) ++ dma_free_coherent(fb->fb.device, PAGE_ALIGN(size), buf, bus_addr); ++ return rc; ++} ++ + static int bcm2708_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg) + { + struct bcm2708_fb *fb = to_bcm2708(info); +@@ -438,6 +544,9 @@ static int bcm2708_ioctl(struct fb_info + RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC, + &dummy, sizeof(dummy)); + break; ++ case FBIODMACOPY: ++ ret = vc_mem_copy(fb, arg); ++ break; + default: + dev_dbg(info->device, "Unknown ioctl 0x%x\n", cmd); + return -ENOTTY; +--- a/drivers/video/fbdev/core/fbmem.c ++++ b/drivers/video/fbdev/core/fbmem.c +@@ -1084,6 +1084,31 @@ fb_blank(struct fb_info *info, int blank + } + EXPORT_SYMBOL(fb_blank); + ++static int fb_copyarea_user(struct fb_info *info, ++ struct fb_copyarea *copy) ++{ ++ int ret = 0; ++ if (!lock_fb_info(info)) ++ return -ENODEV; ++ if (copy->dx >= info->var.xres || ++ copy->sx >= info->var.xres || ++ copy->width > info->var.xres || ++ copy->dy >= info->var.yres || ++ copy->sy >= info->var.yres || ++ copy->height > info->var.yres || ++ copy->dx + copy->width > info->var.xres || ++ copy->sx + copy->width > info->var.xres || ++ copy->dy + copy->height > info->var.yres || ++ copy->sy + copy->height > info->var.yres) { ++ ret = -EINVAL; ++ goto out; ++ } ++ info->fbops->fb_copyarea(info, copy); ++out: ++ unlock_fb_info(info); ++ return ret; ++} ++ + static long do_fb_ioctl(struct fb_info *info, unsigned int cmd, + unsigned long arg) + { +@@ -1094,6 +1119,7 @@ static long do_fb_ioctl(struct fb_info * + struct fb_cmap cmap_from; + struct fb_cmap_user cmap; + struct fb_event event; ++ struct fb_copyarea copy; + void __user *argp = (void __user *)arg; + long ret = 0; + +@@ -1211,6 +1237,15 @@ static long do_fb_ioctl(struct fb_info * + unlock_fb_info(info); + console_unlock(); + break; ++ case FBIOCOPYAREA: ++ if (info->flags & FBINFO_HWACCEL_COPYAREA) { ++ /* only provide this ioctl if it is accelerated */ ++ if (copy_from_user(©, argp, sizeof(copy))) ++ return -EFAULT; ++ ret = fb_copyarea_user(info, ©); ++ break; ++ } ++ /* fall through */ + default: + if (!lock_fb_info(info)) + return -ENODEV; +@@ -1365,6 +1400,7 @@ static long fb_compat_ioctl(struct file + case FBIOPAN_DISPLAY: + case FBIOGET_CON2FBMAP: + case FBIOPUT_CON2FBMAP: ++ case FBIOCOPYAREA: + arg = (unsigned long) compat_ptr(arg); + case FBIOBLANK: + ret = do_fb_ioctl(info, cmd, arg); +--- a/include/uapi/linux/fb.h ++++ b/include/uapi/linux/fb.h +@@ -34,6 +34,12 @@ + #define FBIOPUT_MODEINFO 0x4617 + #define FBIOGET_DISPINFO 0x4618 + #define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32) ++/* ++ * HACK: use 'z' in order not to clash with any other ioctl numbers which might ++ * be concurrently added to the mainline kernel ++ */ ++#define FBIOCOPYAREA _IOW('z', 0x21, struct fb_copyarea) ++#define FBIODMACOPY _IOW('z', 0x22, struct fb_dmacopy) + + #define FB_TYPE_PACKED_PIXELS 0 /* Packed Pixels */ + #define FB_TYPE_PLANES 1 /* Non interleaved planes */ +@@ -346,6 +352,12 @@ struct fb_copyarea { + __u32 sy; + }; + ++struct fb_dmacopy { ++ void *dst; ++ __u32 src; ++ __u32 length; ++}; ++ + struct fb_fillrect { + __u32 dx; /* screen-relative */ + __u32 dy; diff --git a/target/linux/brcm2708/patches-4.9/950-0057-Speed-up-console-framebuffer-imageblit-function.patch b/target/linux/brcm2708/patches-4.9/950-0057-Speed-up-console-framebuffer-imageblit-function.patch new file mode 100644 index 000000000000..8d6337a94dfd --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0057-Speed-up-console-framebuffer-imageblit-function.patch @@ -0,0 +1,209 @@ +From fead9bc9e55df547b54a9cd55d932b209090cfeb Mon Sep 17 00:00:00 2001 +From: Harm Hanemaaijer +Date: Thu, 20 Jun 2013 20:21:39 +0200 +Subject: [PATCH] Speed up console framebuffer imageblit function + +Especially on platforms with a slower CPU but a relatively high +framebuffer fill bandwidth, like current ARM devices, the existing +console monochrome imageblit function used to draw console text is +suboptimal for common pixel depths such as 16bpp and 32bpp. The existing +code is quite general and can deal with several pixel depths. By creating +special case functions for 16bpp and 32bpp, by far the most common pixel +formats used on modern systems, a significant speed-up is attained +which can be readily felt on ARM-based devices like the Raspberry Pi +and the Allwinner platform, but should help any platform using the +fb layer. + +The special case functions allow constant folding, eliminating a number +of instructions including divide operations, and allow the use of an +unrolled loop, eliminating instructions with a variable shift size, +reducing source memory access instructions, and eliminating excessive +branching. These unrolled loops also allow much better code optimization +by the C compiler. The code that selects which optimized variant is used +is also simplified, eliminating integer divide instructions. + +The speed-up, measured by timing 'cat file.txt' in the console, varies +between 40% and 70%, when testing on the Raspberry Pi and Allwinner +ARM-based platforms, depending on font size and the pixel depth, with +the greater benefit for 32bpp. + +Signed-off-by: Harm Hanemaaijer +--- + drivers/video/fbdev/core/cfbimgblt.c | 152 +++++++++++++++++++++++++++++++++-- + 1 file changed, 147 insertions(+), 5 deletions(-) + +--- a/drivers/video/fbdev/core/cfbimgblt.c ++++ b/drivers/video/fbdev/core/cfbimgblt.c +@@ -28,6 +28,11 @@ + * + * Also need to add code to deal with cards endians that are different than + * the native cpu endians. I also need to deal with MSB position in the word. ++ * Modified by Harm Hanemaaijer (fgenfb@yahoo.com) 2013: ++ * - Provide optimized versions of fast_imageblit for 16 and 32bpp that are ++ * significantly faster than the previous implementation. ++ * - Simplify the fast/slow_imageblit selection code, avoiding integer ++ * divides. + */ + #include + #include +@@ -262,6 +267,133 @@ static inline void fast_imageblit(const + } + } + ++/* ++ * Optimized fast_imageblit for bpp == 16. ppw = 2, bit_mask = 3 folded ++ * into the code, main loop unrolled. ++ */ ++ ++static inline void fast_imageblit16(const struct fb_image *image, ++ struct fb_info *p, u8 __iomem * dst1, ++ u32 fgcolor, u32 bgcolor) ++{ ++ u32 fgx = fgcolor, bgx = bgcolor; ++ u32 spitch = (image->width + 7) / 8; ++ u32 end_mask, eorx; ++ const char *s = image->data, *src; ++ u32 __iomem *dst; ++ const u32 *tab = NULL; ++ int i, j, k; ++ ++ tab = fb_be_math(p) ? cfb_tab16_be : cfb_tab16_le; ++ ++ fgx <<= 16; ++ bgx <<= 16; ++ fgx |= fgcolor; ++ bgx |= bgcolor; ++ ++ eorx = fgx ^ bgx; ++ k = image->width / 2; ++ ++ for (i = image->height; i--;) { ++ dst = (u32 __iomem *) dst1; ++ src = s; ++ ++ j = k; ++ while (j >= 4) { ++ u8 bits = *src; ++ end_mask = tab[(bits >> 6) & 3]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[(bits >> 4) & 3]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[(bits >> 2) & 3]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[bits & 3]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ src++; ++ j -= 4; ++ } ++ if (j != 0) { ++ u8 bits = *src; ++ end_mask = tab[(bits >> 6) & 3]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ if (j >= 2) { ++ end_mask = tab[(bits >> 4) & 3]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ if (j == 3) { ++ end_mask = tab[(bits >> 2) & 3]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst); ++ } ++ } ++ } ++ dst1 += p->fix.line_length; ++ s += spitch; ++ } ++} ++ ++/* ++ * Optimized fast_imageblit for bpp == 32. ppw = 1, bit_mask = 1 folded ++ * into the code, main loop unrolled. ++ */ ++ ++static inline void fast_imageblit32(const struct fb_image *image, ++ struct fb_info *p, u8 __iomem * dst1, ++ u32 fgcolor, u32 bgcolor) ++{ ++ u32 fgx = fgcolor, bgx = bgcolor; ++ u32 spitch = (image->width + 7) / 8; ++ u32 end_mask, eorx; ++ const char *s = image->data, *src; ++ u32 __iomem *dst; ++ const u32 *tab = NULL; ++ int i, j, k; ++ ++ tab = cfb_tab32; ++ ++ eorx = fgx ^ bgx; ++ k = image->width; ++ ++ for (i = image->height; i--;) { ++ dst = (u32 __iomem *) dst1; ++ src = s; ++ ++ j = k; ++ while (j >= 8) { ++ u8 bits = *src; ++ end_mask = tab[(bits >> 7) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[(bits >> 6) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[(bits >> 5) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[(bits >> 4) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[(bits >> 3) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[(bits >> 2) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[(bits >> 1) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ end_mask = tab[bits & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ src++; ++ j -= 8; ++ } ++ if (j != 0) { ++ u32 bits = (u32) * src; ++ while (j > 1) { ++ end_mask = tab[(bits >> 7) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst++); ++ bits <<= 1; ++ j--; ++ } ++ end_mask = tab[(bits >> 7) & 1]; ++ FB_WRITEL((end_mask & eorx) ^ bgx, dst); ++ } ++ dst1 += p->fix.line_length; ++ s += spitch; ++ } ++} ++ + void cfb_imageblit(struct fb_info *p, const struct fb_image *image) + { + u32 fgcolor, bgcolor, start_index, bitstart, pitch_index = 0; +@@ -294,11 +426,21 @@ void cfb_imageblit(struct fb_info *p, co + bgcolor = image->bg_color; + } + +- if (32 % bpp == 0 && !start_index && !pitch_index && +- ((width & (32/bpp-1)) == 0) && +- bpp >= 8 && bpp <= 32) +- fast_imageblit(image, p, dst1, fgcolor, bgcolor); +- else ++ if (!start_index && !pitch_index) { ++ if (bpp == 32) ++ fast_imageblit32(image, p, dst1, fgcolor, ++ bgcolor); ++ else if (bpp == 16 && (width & 1) == 0) ++ fast_imageblit16(image, p, dst1, fgcolor, ++ bgcolor); ++ else if (bpp == 8 && (width & 3) == 0) ++ fast_imageblit(image, p, dst1, fgcolor, ++ bgcolor); ++ else ++ slow_imageblit(image, p, dst1, fgcolor, ++ bgcolor, ++ start_index, pitch_index); ++ } else + slow_imageblit(image, p, dst1, fgcolor, bgcolor, + start_index, pitch_index); + } else diff --git a/target/linux/brcm2708/patches-4.9/950-0058-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch b/target/linux/brcm2708/patches-4.9/950-0058-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch new file mode 100644 index 000000000000..408ac045f7d9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0058-enabling-the-realtime-clock-1-wire-chip-DS1307-and-1.patch @@ -0,0 +1,242 @@ +From 5edc95eee5ef69d7bfe03eede0e711e8f196dedc Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Wed, 8 May 2013 11:46:50 +0100 +Subject: [PATCH] enabling the realtime clock 1-wire chip DS1307 and 1-wire on + GPIO4 (as a module) + +1-wire: Add support for configuring pin for w1-gpio kernel module +See: https://github.com/raspberrypi/linux/pull/457 + +Add bitbanging pullups, use them for w1-gpio + +Allows parasite power to work, uses module option pullup=1 + +bcm2708: Ensure 1-wire pullup is disabled by default, and expose as module parameter + +Signed-off-by: Alex J Lennon + +w1-gpio: Add gpiopin module parameter and correctly free up gpio pull-up pin, if set + +Signed-off-by: Alex J Lennon + +w1-gpio: Sort out the pullup/parasitic power tangle +--- + drivers/w1/masters/w1-gpio.c | 69 ++++++++++++++++++++++++++++++++++++++++---- + drivers/w1/w1.h | 6 ++++ + drivers/w1/w1_int.c | 14 +++++++++ + drivers/w1/w1_io.c | 18 ++++++++++-- + include/linux/w1-gpio.h | 1 + + 5 files changed, 99 insertions(+), 9 deletions(-) + +--- a/drivers/w1/masters/w1-gpio.c ++++ b/drivers/w1/masters/w1-gpio.c +@@ -23,6 +23,19 @@ + #include "../w1.h" + #include "../w1_int.h" + ++static int w1_gpio_pullup = 0; ++static int w1_gpio_pullup_orig = 0; ++module_param_named(pullup, w1_gpio_pullup, int, 0); ++MODULE_PARM_DESC(pullup, "Enable parasitic power (power on data) mode"); ++static int w1_gpio_pullup_pin = -1; ++static int w1_gpio_pullup_pin_orig = -1; ++module_param_named(extpullup, w1_gpio_pullup_pin, int, 0); ++MODULE_PARM_DESC(extpullup, "GPIO external pullup pin number"); ++static int w1_gpio_pin = -1; ++static int w1_gpio_pin_orig = -1; ++module_param_named(gpiopin, w1_gpio_pin, int, 0); ++MODULE_PARM_DESC(gpiopin, "GPIO pin number"); ++ + static u8 w1_gpio_set_pullup(void *data, int delay) + { + struct w1_gpio_platform_data *pdata = data; +@@ -67,6 +80,16 @@ static u8 w1_gpio_read_bit(void *data) + return gpio_get_value(pdata->pin) ? 1 : 0; + } + ++static void w1_gpio_bitbang_pullup(void *data, u8 on) ++{ ++ struct w1_gpio_platform_data *pdata = data; ++ ++ if (on) ++ gpio_direction_output(pdata->pin, 1); ++ else ++ gpio_direction_input(pdata->pin); ++} ++ + #if defined(CONFIG_OF) + static const struct of_device_id w1_gpio_dt_ids[] = { + { .compatible = "w1-gpio" }, +@@ -80,6 +103,7 @@ static int w1_gpio_probe_dt(struct platf + struct w1_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct device_node *np = pdev->dev.of_node; + int gpio; ++ u32 value; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) +@@ -88,6 +112,9 @@ static int w1_gpio_probe_dt(struct platf + if (of_get_property(np, "linux,open-drain", NULL)) + pdata->is_open_drain = 1; + ++ if (of_property_read_u32(np, "rpi,parasitic-power", &value) == 0) ++ pdata->parasitic_power = (value != 0); ++ + gpio = of_get_gpio(np, 0); + if (gpio < 0) { + if (gpio != -EPROBE_DEFER) +@@ -103,7 +130,7 @@ static int w1_gpio_probe_dt(struct platf + if (gpio == -EPROBE_DEFER) + return gpio; + /* ignore other errors as the pullup gpio is optional */ +- pdata->ext_pullup_enable_pin = gpio; ++ pdata->ext_pullup_enable_pin = (gpio >= 0) ? gpio : -1; + + pdev->dev.platform_data = pdata; + +@@ -113,13 +140,15 @@ static int w1_gpio_probe_dt(struct platf + static int w1_gpio_probe(struct platform_device *pdev) + { + struct w1_bus_master *master; +- struct w1_gpio_platform_data *pdata; ++ struct w1_gpio_platform_data *pdata = pdev->dev.platform_data; + int err; + +- if (of_have_populated_dt()) { +- err = w1_gpio_probe_dt(pdev); +- if (err < 0) +- return err; ++ if(pdata == NULL) { ++ if (of_have_populated_dt()) { ++ err = w1_gpio_probe_dt(pdev); ++ if (err < 0) ++ return err; ++ } + } + + pdata = dev_get_platdata(&pdev->dev); +@@ -136,6 +165,22 @@ static int w1_gpio_probe(struct platform + return -ENOMEM; + } + ++ w1_gpio_pin_orig = pdata->pin; ++ w1_gpio_pullup_pin_orig = pdata->ext_pullup_enable_pin; ++ w1_gpio_pullup_orig = pdata->parasitic_power; ++ ++ if(gpio_is_valid(w1_gpio_pin)) { ++ pdata->pin = w1_gpio_pin; ++ pdata->ext_pullup_enable_pin = -1; ++ pdata->parasitic_power = -1; ++ } ++ pdata->parasitic_power |= w1_gpio_pullup; ++ if(gpio_is_valid(w1_gpio_pullup_pin)) { ++ pdata->ext_pullup_enable_pin = w1_gpio_pullup_pin; ++ } ++ ++ dev_info(&pdev->dev, "gpio pin %d, external pullup pin %d, parasitic power %d\n", pdata->pin, pdata->ext_pullup_enable_pin, pdata->parasitic_power); ++ + err = devm_gpio_request(&pdev->dev, pdata->pin, "w1"); + if (err) { + dev_err(&pdev->dev, "gpio_request (pin) failed\n"); +@@ -165,6 +210,14 @@ static int w1_gpio_probe(struct platform + master->set_pullup = w1_gpio_set_pullup; + } + ++ if (pdata->parasitic_power) { ++ if (pdata->is_open_drain) ++ printk(KERN_ERR "w1-gpio 'pullup'(parasitic power) " ++ "option doesn't work with open drain GPIO\n"); ++ else ++ master->bitbang_pullup = w1_gpio_bitbang_pullup; ++ } ++ + err = w1_add_master_device(master); + if (err) { + dev_err(&pdev->dev, "w1_add_master device failed\n"); +@@ -195,6 +248,10 @@ static int w1_gpio_remove(struct platfor + + w1_remove_master_device(master); + ++ pdata->pin = w1_gpio_pin_orig; ++ pdata->ext_pullup_enable_pin = w1_gpio_pullup_pin_orig; ++ pdata->parasitic_power = w1_gpio_pullup_orig; ++ + return 0; + } + +--- a/drivers/w1/w1.h ++++ b/drivers/w1/w1.h +@@ -173,6 +173,12 @@ struct w1_bus_master + + u8 (*set_pullup)(void *, int); + ++ /** ++ * Turns the pullup on/off in bitbanging mode, takes an on/off argument. ++ * @return -1=Error, 0=completed ++ */ ++ void (*bitbang_pullup) (void *, u8); ++ + void (*search)(void *, struct w1_master *, + u8, w1_slave_found_callback); + }; +--- a/drivers/w1/w1_int.c ++++ b/drivers/w1/w1_int.c +@@ -122,6 +122,20 @@ int w1_add_master_device(struct w1_bus_m + return(-EINVAL); + } + ++ /* bitbanging hardware uses bitbang_pullup, other hardware uses set_pullup ++ * and takes care of timing itself */ ++ if (!master->write_byte && !master->touch_bit && master->set_pullup) { ++ printk(KERN_ERR "w1_add_master_device: set_pullup requires " ++ "write_byte or touch_bit, disabling\n"); ++ master->set_pullup = NULL; ++ } ++ ++ if (master->set_pullup && master->bitbang_pullup) { ++ printk(KERN_ERR "w1_add_master_device: set_pullup should not " ++ "be set when bitbang_pullup is used, disabling\n"); ++ master->set_pullup = NULL; ++ } ++ + /* Lock until the device is added (or not) to w1_masters. */ + mutex_lock(&w1_mlock); + /* Search for the first available id (starting at 1). */ +--- a/drivers/w1/w1_io.c ++++ b/drivers/w1/w1_io.c +@@ -134,10 +134,22 @@ static void w1_pre_write(struct w1_maste + static void w1_post_write(struct w1_master *dev) + { + if (dev->pullup_duration) { +- if (dev->enable_pullup && dev->bus_master->set_pullup) +- dev->bus_master->set_pullup(dev->bus_master->data, 0); +- else ++ if (dev->enable_pullup) { ++ if (dev->bus_master->set_pullup) { ++ dev->bus_master->set_pullup(dev-> ++ bus_master->data, ++ 0); ++ } else if (dev->bus_master->bitbang_pullup) { ++ dev->bus_master-> ++ bitbang_pullup(dev->bus_master->data, 1); + msleep(dev->pullup_duration); ++ dev->bus_master-> ++ bitbang_pullup(dev->bus_master->data, 0); ++ } ++ } else { ++ msleep(dev->pullup_duration); ++ } ++ + dev->pullup_duration = 0; + } + } +--- a/include/linux/w1-gpio.h ++++ b/include/linux/w1-gpio.h +@@ -18,6 +18,7 @@ + struct w1_gpio_platform_data { + unsigned int pin; + unsigned int is_open_drain:1; ++ unsigned int parasitic_power:1; + void (*enable_external_pullup)(int enable); + unsigned int ext_pullup_enable_pin; + unsigned int pullup_duration; diff --git a/target/linux/brcm2708/patches-4.9/950-0059-Added-Device-IDs-for-August-DVB-T-205.patch b/target/linux/brcm2708/patches-4.9/950-0059-Added-Device-IDs-for-August-DVB-T-205.patch new file mode 100644 index 000000000000..a9906f3e3cea --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0059-Added-Device-IDs-for-August-DVB-T-205.patch @@ -0,0 +1,22 @@ +From 0d3a6a7484390def36773cb4fee0e16d6b8c45d1 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Wed, 3 Jul 2013 00:54:08 +0100 +Subject: [PATCH] Added Device IDs for August DVB-T 205 + +--- + drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c ++++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +@@ -1916,6 +1916,10 @@ static const struct usb_device_id rtl28x + &rtl28xxu_props, "Compro VideoMate U650F", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd394, + &rtl28xxu_props, "MaxMedia HU394-T", NULL) }, ++ { DVB_USB_DEVICE(USB_VID_GTEK, 0xb803 /*USB_PID_AUGUST_DVBT205*/, ++ &rtl28xxu_props, "August DVB-T 205", NULL) }, ++ { DVB_USB_DEVICE(USB_VID_GTEK, 0xa803 /*USB_PID_AUGUST_DVBT205*/, ++ &rtl28xxu_props, "August DVB-T 205", NULL) }, + { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a03, + &rtl28xxu_props, "Leadtek WinFast DTV Dongle mini", NULL) }, + { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_CPYTO_REDI_PC50A, diff --git a/target/linux/brcm2708/patches-4.9/950-0060-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch b/target/linux/brcm2708/patches-4.9/950-0060-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch new file mode 100644 index 000000000000..73c9edeea4e6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0060-config-Enable-CONFIG_MEMCG-but-leave-it-disabled-due.patch @@ -0,0 +1,50 @@ +From c50fe09c78e9b87137e0188139c774bd4f12dcb2 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Wed, 18 Dec 2013 22:16:19 +0000 +Subject: [PATCH] config: Enable CONFIG_MEMCG, but leave it disabled (due to + memory cost). Enable with cgroup_enable=memory. + +--- + kernel/cgroup.c | 24 +++++++++++++++++++++++- + 1 file changed, 23 insertions(+), 1 deletion(-) + +--- a/kernel/cgroup.c ++++ b/kernel/cgroup.c +@@ -5626,7 +5626,7 @@ int __init cgroup_init_early(void) + return 0; + } + +-static u16 cgroup_disable_mask __initdata; ++static u16 cgroup_disable_mask __initdata = 1<<0; + + /** + * cgroup_init - cgroup initialization +@@ -6163,6 +6163,28 @@ static int __init cgroup_no_v1(char *str + } + __setup("cgroup_no_v1=", cgroup_no_v1); + ++static int __init cgroup_enable(char *str) ++{ ++ struct cgroup_subsys *ss; ++ char *token; ++ int i; ++ ++ while ((token = strsep(&str, ",")) != NULL) { ++ if (!*token) ++ continue; ++ ++ for_each_subsys(ss, i) { ++ if (strcmp(token, ss->name) && ++ strcmp(token, ss->legacy_name)) ++ continue; ++ ++ cgroup_disable_mask &= ~(1 << i); ++ } ++ } ++ return 1; ++} ++__setup("cgroup_enable=", cgroup_enable); ++ + /** + * css_tryget_online_from_dir - get corresponding css from a cgroup dentry + * @dentry: directory dentry of interest diff --git a/target/linux/brcm2708/patches-4.9/950-0061-hid-Reduce-default-mouse-polling-interval-to-60Hz.patch b/target/linux/brcm2708/patches-4.9/950-0061-hid-Reduce-default-mouse-polling-interval-to-60Hz.patch new file mode 100644 index 000000000000..444c64e471e9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0061-hid-Reduce-default-mouse-polling-interval-to-60Hz.patch @@ -0,0 +1,36 @@ +From 56f13ae9d518c5aec8736ccc639f2f5e2c3784ad Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Mon, 14 Jul 2014 22:02:09 +0100 +Subject: [PATCH] hid: Reduce default mouse polling interval to 60Hz + +Reduces overhead when using X +--- + drivers/hid/usbhid/hid-core.c | 10 +++++++--- + 1 file changed, 7 insertions(+), 3 deletions(-) + +--- a/drivers/hid/usbhid/hid-core.c ++++ b/drivers/hid/usbhid/hid-core.c +@@ -49,7 +49,7 @@ + * Module parameters. + */ + +-static unsigned int hid_mousepoll_interval; ++static unsigned int hid_mousepoll_interval = ~0; + module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644); + MODULE_PARM_DESC(mousepoll, "Polling interval of mice"); + +@@ -1083,8 +1083,12 @@ static int usbhid_start(struct hid_devic + } + + /* Change the polling interval of mice. */ +- if (hid->collection->usage == HID_GD_MOUSE && hid_mousepoll_interval > 0) +- interval = hid_mousepoll_interval; ++ if (hid->collection->usage == HID_GD_MOUSE) { ++ if (hid_mousepoll_interval == ~0 && interval < 16) ++ interval = 16; ++ else if (hid_mousepoll_interval != ~0 && hid_mousepoll_interval != 0) ++ interval = hid_mousepoll_interval; ++ } + + ret = -ENOMEM; + if (usb_endpoint_dir_in(endpoint)) { diff --git a/target/linux/brcm2708/patches-4.9/950-0062-rpi-ft5406-Add-touchscreen-driver-for-pi-LCD-display.patch b/target/linux/brcm2708/patches-4.9/950-0062-rpi-ft5406-Add-touchscreen-driver-for-pi-LCD-display.patch new file mode 100644 index 000000000000..43ed3faa9c3a --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0062-rpi-ft5406-Add-touchscreen-driver-for-pi-LCD-display.patch @@ -0,0 +1,351 @@ +From 18c740925ca44b8a2f55ac201acf935f9fa97515 Mon Sep 17 00:00:00 2001 +From: Gordon Hollingworth +Date: Tue, 12 May 2015 14:47:56 +0100 +Subject: [PATCH] rpi-ft5406: Add touchscreen driver for pi LCD display + +Fix driver detection failure Check that the buffer response is non-zero meaning the touchscreen was detected + +rpi-ft5406: Use firmware API + +RPI-FT5406: Enable aarch64 support through explicit iomem interface + +Signed-off-by: Gerhard de Clercq +--- + drivers/input/touchscreen/Kconfig | 7 + + drivers/input/touchscreen/Makefile | 1 + + drivers/input/touchscreen/rpi-ft5406.c | 292 +++++++++++++++++++++++++++++ + include/soc/bcm2835/raspberrypi-firmware.h | 1 + + 4 files changed, 301 insertions(+) + create mode 100644 drivers/input/touchscreen/rpi-ft5406.c + +--- a/drivers/input/touchscreen/Kconfig ++++ b/drivers/input/touchscreen/Kconfig +@@ -638,6 +638,13 @@ config TOUCHSCREEN_EDT_FT5X06 + To compile this driver as a module, choose M here: the + module will be called edt-ft5x06. + ++config TOUCHSCREEN_RPI_FT5406 ++ tristate "Raspberry Pi FT5406 driver" ++ depends on RASPBERRYPI_FIRMWARE ++ help ++ Say Y here to enable the Raspberry Pi memory based FT5406 device ++ ++ + config TOUCHSCREEN_MIGOR + tristate "Renesas MIGO-R touchscreen" + depends on (SH_MIGOR || COMPILE_TEST) && I2C +--- a/drivers/input/touchscreen/Makefile ++++ b/drivers/input/touchscreen/Makefile +@@ -29,6 +29,7 @@ obj-$(CONFIG_TOUCHSCREEN_DA9034) += da90 + obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o + obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o + obj-$(CONFIG_TOUCHSCREEN_EDT_FT5X06) += edt-ft5x06.o ++obj-$(CONFIG_TOUCHSCREEN_RPI_FT5406) += rpi-ft5406.o + obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o + obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o + obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o +--- /dev/null ++++ b/drivers/input/touchscreen/rpi-ft5406.c +@@ -0,0 +1,292 @@ ++/* ++ * Driver for memory based ft5406 touchscreen ++ * ++ * Copyright (C) 2015 Raspberry Pi ++ * ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define MAXIMUM_SUPPORTED_POINTS 10 ++struct ft5406_regs { ++ uint8_t device_mode; ++ uint8_t gesture_id; ++ uint8_t num_points; ++ struct ft5406_touch { ++ uint8_t xh; ++ uint8_t xl; ++ uint8_t yh; ++ uint8_t yl; ++ uint8_t res1; ++ uint8_t res2; ++ } point[MAXIMUM_SUPPORTED_POINTS]; ++}; ++ ++#define SCREEN_WIDTH 800 ++#define SCREEN_HEIGHT 480 ++ ++struct ft5406 { ++ struct platform_device * pdev; ++ struct input_dev * input_dev; ++ void __iomem * ts_base; ++ dma_addr_t bus_addr; ++ struct task_struct * thread; ++}; ++ ++/* Thread to poll for touchscreen events ++ * ++ * This thread polls the memory based register copy of the ft5406 registers ++ * using the number of points register to know whether the copy has been ++ * updated (we write 99 to the memory copy, the GPU will write between ++ * 0 - 10 points) ++ */ ++static int ft5406_thread(void *arg) ++{ ++ struct ft5406 *ts = (struct ft5406 *) arg; ++ struct ft5406_regs regs; ++ int known_ids = 0; ++ ++ while(!kthread_should_stop()) ++ { ++ // 60fps polling ++ msleep_interruptible(17); ++ memcpy_fromio(®s, ts->ts_base, sizeof(struct ft5406_regs)); ++ iowrite8(99, ts->ts_base + offsetof(struct ft5406_regs, num_points)); ++ // Do not output if theres no new information (num_points is 99) ++ // or we have no touch points and don't need to release any ++ if(!(regs.num_points == 99 || (regs.num_points == 0 && known_ids == 0))) ++ { ++ int i; ++ int modified_ids = 0, released_ids; ++ for(i = 0; i < regs.num_points; i++) ++ { ++ int x = (((int) regs.point[i].xh & 0xf) << 8) + regs.point[i].xl; ++ int y = (((int) regs.point[i].yh & 0xf) << 8) + regs.point[i].yl; ++ int touchid = (regs.point[i].yh >> 4) & 0xf; ++ ++ modified_ids |= 1 << touchid; ++ ++ if(!((1 << touchid) & known_ids)) ++ dev_dbg(&ts->pdev->dev, "x = %d, y = %d, touchid = %d\n", x, y, touchid); ++ ++ input_mt_slot(ts->input_dev, touchid); ++ input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, 1); ++ ++ input_report_abs(ts->input_dev, ABS_MT_POSITION_X, x); ++ input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, y); ++ ++ } ++ ++ released_ids = known_ids & ~modified_ids; ++ for(i = 0; released_ids && i < MAXIMUM_SUPPORTED_POINTS; i++) ++ { ++ if(released_ids & (1<pdev->dev, "Released %d, known = %x modified = %x\n", i, known_ids, modified_ids); ++ input_mt_slot(ts->input_dev, i); ++ input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, 0); ++ modified_ids &= ~(1 << i); ++ } ++ } ++ known_ids = modified_ids; ++ ++ input_mt_report_pointer_emulation(ts->input_dev, true); ++ input_sync(ts->input_dev); ++ } ++ ++ } ++ ++ return 0; ++} ++ ++static int ft5406_probe(struct platform_device *pdev) ++{ ++ int err = 0; ++ struct device *dev = &pdev->dev; ++ struct device_node *np = dev->of_node; ++ struct ft5406 * ts; ++ struct device_node *fw_node; ++ struct rpi_firmware *fw; ++ u32 touchbuf; ++ ++ dev_info(dev, "Probing device\n"); ++ ++ fw_node = of_parse_phandle(np, "firmware", 0); ++ if (!fw_node) { ++ dev_err(dev, "Missing firmware node\n"); ++ return -ENOENT; ++ } ++ ++ fw = rpi_firmware_get(fw_node); ++ if (!fw) ++ return -EPROBE_DEFER; ++ ++ ts = devm_kzalloc(dev, sizeof(struct ft5406), GFP_KERNEL); ++ if (!ts) { ++ dev_err(dev, "Failed to allocate memory\n"); ++ return -ENOMEM; ++ } ++ ++ ts->input_dev = input_allocate_device(); ++ if (!ts->input_dev) { ++ dev_err(dev, "Failed to allocate input device\n"); ++ return -ENOMEM; ++ } ++ ++ ts->ts_base = dma_zalloc_coherent(dev, PAGE_SIZE, &ts->bus_addr, GFP_KERNEL); ++ if (!ts->ts_base) { ++ pr_err("[%s]: failed to dma_alloc_coherent(%ld)\n", ++ __func__, PAGE_SIZE); ++ err = -ENOMEM; ++ goto out; ++ } ++ ++ touchbuf = (u32)ts->bus_addr; ++ err = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF, ++ &touchbuf, sizeof(touchbuf)); ++ ++ if (err || touchbuf != 0) { ++ dev_warn(dev, "Failed to set touchbuf, trying to get err:%x\n", err); ++ dma_free_coherent(dev, PAGE_SIZE, ts->ts_base, ts->bus_addr); ++ ts->ts_base = 0; ++ ts->bus_addr = 0; ++ } ++ ++ if (!ts->ts_base) { ++ dev_warn(dev, "set failed, trying get (err:%d touchbuf:%x virt:%p bus:%x)\n", err, touchbuf, ts->ts_base, ts->bus_addr); ++ ++ err = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF, ++ &touchbuf, sizeof(touchbuf)); ++ if (err) { ++ dev_err(dev, "Failed to get touch buffer\n"); ++ goto out; ++ } ++ ++ if (!touchbuf) { ++ dev_err(dev, "Touchscreen not detected\n"); ++ err = -ENODEV; ++ goto out; ++ } ++ ++ dev_dbg(dev, "Got TS buffer 0x%x\n", touchbuf); ++ ++ // mmap the physical memory ++ touchbuf &= ~0xc0000000; ++ ts->ts_base = ioremap(touchbuf, sizeof(struct ft5406_regs)); ++ if (ts->ts_base == NULL) ++ { ++ dev_err(dev, "Failed to map physical address\n"); ++ err = -ENOMEM; ++ goto out; ++ } ++ } ++ platform_set_drvdata(pdev, ts); ++ ts->pdev = pdev; ++ ++ ts->input_dev->name = "FT5406 memory based driver"; ++ ++ __set_bit(EV_KEY, ts->input_dev->evbit); ++ __set_bit(EV_SYN, ts->input_dev->evbit); ++ __set_bit(EV_ABS, ts->input_dev->evbit); ++ ++ input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, 0, ++ SCREEN_WIDTH, 0, 0); ++ input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, 0, ++ SCREEN_HEIGHT, 0, 0); ++ ++ input_mt_init_slots(ts->input_dev, MAXIMUM_SUPPORTED_POINTS, INPUT_MT_DIRECT); ++ ++ input_set_drvdata(ts->input_dev, ts); ++ ++ err = input_register_device(ts->input_dev); ++ if (err) { ++ dev_err(dev, "could not register input device, %d\n", ++ err); ++ goto out; ++ } ++ ++ // create thread to poll the touch events ++ ts->thread = kthread_run(ft5406_thread, ts, "ft5406"); ++ if(ts->thread == NULL) ++ { ++ dev_err(dev, "Failed to create kernel thread"); ++ err = -ENOMEM; ++ goto out; ++ } ++ ++ return 0; ++ ++out: ++ if (ts->bus_addr) { ++ dma_free_coherent(dev, PAGE_SIZE, ts->ts_base, ts->bus_addr); ++ ts->bus_addr = 0; ++ ts->ts_base = NULL; ++ } else if (ts->ts_base) { ++ iounmap(ts->ts_base); ++ ts->ts_base = NULL; ++ } ++ if (ts->input_dev) { ++ input_unregister_device(ts->input_dev); ++ ts->input_dev = NULL; ++ } ++ return err; ++} ++ ++static int ft5406_remove(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct ft5406 *ts = (struct ft5406 *) platform_get_drvdata(pdev); ++ ++ dev_info(dev, "Removing rpi-ft5406\n"); ++ ++ kthread_stop(ts->thread); ++ ++ if (ts->bus_addr) ++ dma_free_coherent(dev, PAGE_SIZE, ts->ts_base, ts->bus_addr); ++ else if (ts->ts_base) ++ iounmap(ts->ts_base); ++ if (ts->input_dev) ++ input_unregister_device(ts->input_dev); ++ ++ return 0; ++} ++ ++static const struct of_device_id ft5406_match[] = { ++ { .compatible = "rpi,rpi-ft5406", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, ft5406_match); ++ ++static struct platform_driver ft5406_driver = { ++ .driver = { ++ .name = "rpi-ft5406", ++ .owner = THIS_MODULE, ++ .of_match_table = ft5406_match, ++ }, ++ .probe = ft5406_probe, ++ .remove = ft5406_remove, ++}; ++ ++module_platform_driver(ft5406_driver); ++ ++MODULE_AUTHOR("Gordon Hollingworth"); ++MODULE_DESCRIPTION("Touchscreen driver for memory based FT5406"); ++MODULE_LICENSE("GPL"); +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -115,6 +115,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, + RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, + RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f, + RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e, + RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f, + diff --git a/target/linux/brcm2708/patches-4.9/950-0063-Improve-__copy_to_user-and-__copy_from_user-performa.patch b/target/linux/brcm2708/patches-4.9/950-0063-Improve-__copy_to_user-and-__copy_from_user-performa.patch new file mode 100644 index 000000000000..a7ce64ba3811 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0063-Improve-__copy_to_user-and-__copy_from_user-performa.patch @@ -0,0 +1,1543 @@ +From ebd731dd71ec9728a5a87ec1cd695be15828c32c Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Mon, 28 Nov 2016 16:50:04 +0000 +Subject: [PATCH] Improve __copy_to_user and __copy_from_user performance + +Provide a __copy_from_user that uses memcpy. On BCM2708, use +optimised memcpy/memmove/memcmp/memset implementations. + +arch/arm: Add mmiocpy/set aliases for memcpy/set + +See: https://github.com/raspberrypi/linux/issues/1082 + +copy_from_user: CPU_SW_DOMAIN_PAN compatibility + +The downstream copy_from_user acceleration must also play nice with +CONFIG_CPU_SW_DOMAIN_PAN. + +See: https://github.com/raspberrypi/linux/issues/1381 + +Signed-off-by: Phil Elwell +--- + arch/arm/include/asm/string.h | 5 + + arch/arm/include/asm/uaccess.h | 3 + + arch/arm/lib/Makefile | 15 +- + arch/arm/lib/arm-mem.h | 159 ++++++++++++ + arch/arm/lib/copy_from_user.S | 4 +- + arch/arm/lib/exports_rpi.c | 37 +++ + arch/arm/lib/memcmp_rpi.S | 285 +++++++++++++++++++++ + arch/arm/lib/memcpy_rpi.S | 61 +++++ + arch/arm/lib/memcpymove.h | 506 +++++++++++++++++++++++++++++++++++++ + arch/arm/lib/memmove_rpi.S | 61 +++++ + arch/arm/lib/memset_rpi.S | 123 +++++++++ + arch/arm/lib/uaccess_with_memcpy.c | 120 ++++++++- + arch/arm/mach-bcm/Kconfig | 7 + + 13 files changed, 1380 insertions(+), 6 deletions(-) + create mode 100644 arch/arm/lib/arm-mem.h + create mode 100644 arch/arm/lib/exports_rpi.c + create mode 100644 arch/arm/lib/memcmp_rpi.S + create mode 100644 arch/arm/lib/memcpy_rpi.S + create mode 100644 arch/arm/lib/memcpymove.h + create mode 100644 arch/arm/lib/memmove_rpi.S + create mode 100644 arch/arm/lib/memset_rpi.S + +--- a/arch/arm/include/asm/string.h ++++ b/arch/arm/include/asm/string.h +@@ -24,6 +24,11 @@ extern void * memchr(const void *, int, + #define __HAVE_ARCH_MEMSET + extern void * memset(void *, int, __kernel_size_t); + ++#ifdef CONFIG_BCM2835_FAST_MEMCPY ++#define __HAVE_ARCH_MEMCMP ++extern int memcmp(const void *, const void *, size_t); ++#endif ++ + extern void __memzero(void *ptr, __kernel_size_t n); + + #define memset(p,v,n) \ +--- a/arch/arm/include/asm/uaccess.h ++++ b/arch/arm/include/asm/uaccess.h +@@ -477,6 +477,9 @@ do { \ + extern unsigned long __must_check + arm_copy_from_user(void *to, const void __user *from, unsigned long n); + ++extern unsigned long __must_check ++__copy_from_user_std(void *to, const void __user *from, unsigned long n); ++ + static inline unsigned long __must_check + __copy_from_user(void *to, const void __user *from, unsigned long n) + { +--- a/arch/arm/lib/Makefile ++++ b/arch/arm/lib/Makefile +@@ -6,9 +6,8 @@ + + lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ + csumpartialcopy.o csumpartialcopyuser.o clearbit.o \ +- delay.o delay-loop.o findbit.o memchr.o memcpy.o \ +- memmove.o memset.o memzero.o setbit.o \ +- strchr.o strrchr.o \ ++ delay.o delay-loop.o findbit.o memchr.o memzero.o \ ++ setbit.o strchr.o strrchr.o \ + testchangebit.o testclearbit.o testsetbit.o \ + ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ + ucmpdi2.o lib1funcs.o div64.o \ +@@ -18,6 +17,16 @@ lib-y := backtrace.o changebit.o csumip + mmu-y := clear_user.o copy_page.o getuser.o putuser.o \ + copy_from_user.o copy_to_user.o + ++# Choose optimised implementations for Raspberry Pi ++ifeq ($(CONFIG_BCM2835_FAST_MEMCPY),y) ++ CFLAGS_uaccess_with_memcpy.o += -DCOPY_FROM_USER_THRESHOLD=1600 ++ CFLAGS_uaccess_with_memcpy.o += -DCOPY_TO_USER_THRESHOLD=672 ++ obj-$(CONFIG_MODULES) += exports_rpi.o ++ lib-y += memcpy_rpi.o memmove_rpi.o memset_rpi.o memcmp_rpi.o ++else ++ lib-y += memcpy.o memmove.o memset.o ++endif ++ + # using lib_ here won't override already available weak symbols + obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o + +--- /dev/null ++++ b/arch/arm/lib/arm-mem.h +@@ -0,0 +1,159 @@ ++/* ++Copyright (c) 2013, Raspberry Pi Foundation ++Copyright (c) 2013, RISC OS Open Ltd ++All rights reserved. ++ ++Redistribution and use in source and binary forms, with or without ++modification, are permitted provided that the following conditions are met: ++ * Redistributions of source code must retain the above copyright ++ notice, this list of conditions and the following disclaimer. ++ * Redistributions in binary form must reproduce the above copyright ++ notice, this list of conditions and the following disclaimer in the ++ documentation and/or other materials provided with the distribution. ++ * Neither the name of the copyright holder nor the ++ names of its contributors may be used to endorse or promote products ++ derived from this software without specific prior written permission. ++ ++THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY ++DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++*/ ++ ++.macro myfunc fname ++ .func fname ++ .global fname ++fname: ++.endm ++ ++.macro preload_leading_step1 backwards, ptr, base ++/* If the destination is already 16-byte aligned, then we need to preload ++ * between 0 and prefetch_distance (inclusive) cache lines ahead so there ++ * are no gaps when the inner loop starts. ++ */ ++ .if backwards ++ sub ptr, base, #1 ++ bic ptr, ptr, #31 ++ .else ++ bic ptr, base, #31 ++ .endif ++ .set OFFSET, 0 ++ .rept prefetch_distance+1 ++ pld [ptr, #OFFSET] ++ .if backwards ++ .set OFFSET, OFFSET-32 ++ .else ++ .set OFFSET, OFFSET+32 ++ .endif ++ .endr ++.endm ++ ++.macro preload_leading_step2 backwards, ptr, base, leading_bytes, tmp ++/* However, if the destination is not 16-byte aligned, we may need to ++ * preload one more cache line than that. The question we need to ask is: ++ * are the leading bytes more than the amount by which the source ++ * pointer will be rounded down for preloading, and if so, by how many ++ * cache lines? ++ */ ++ .if backwards ++/* Here we compare against how many bytes we are into the ++ * cache line, counting down from the highest such address. ++ * Effectively, we want to calculate ++ * leading_bytes = dst&15 ++ * cacheline_offset = 31-((src-leading_bytes-1)&31) ++ * extra_needed = leading_bytes - cacheline_offset ++ * and test if extra_needed is <= 0, or rearranging: ++ * leading_bytes + (src-leading_bytes-1)&31 <= 31 ++ */ ++ mov tmp, base, lsl #32-5 ++ sbc tmp, tmp, leading_bytes, lsl #32-5 ++ adds tmp, tmp, leading_bytes, lsl #32-5 ++ bcc 61f ++ pld [ptr, #-32*(prefetch_distance+1)] ++ .else ++/* Effectively, we want to calculate ++ * leading_bytes = (-dst)&15 ++ * cacheline_offset = (src+leading_bytes)&31 ++ * extra_needed = leading_bytes - cacheline_offset ++ * and test if extra_needed is <= 0. ++ */ ++ mov tmp, base, lsl #32-5 ++ add tmp, tmp, leading_bytes, lsl #32-5 ++ rsbs tmp, tmp, leading_bytes, lsl #32-5 ++ bls 61f ++ pld [ptr, #32*(prefetch_distance+1)] ++ .endif ++61: ++.endm ++ ++.macro preload_trailing backwards, base, remain, tmp ++ /* We need either 0, 1 or 2 extra preloads */ ++ .if backwards ++ rsb tmp, base, #0 ++ mov tmp, tmp, lsl #32-5 ++ .else ++ mov tmp, base, lsl #32-5 ++ .endif ++ adds tmp, tmp, remain, lsl #32-5 ++ adceqs tmp, tmp, #0 ++ /* The instruction above has two effects: ensures Z is only ++ * set if C was clear (so Z indicates that both shifted quantities ++ * were 0), and clears C if Z was set (so C indicates that the sum ++ * of the shifted quantities was greater and not equal to 32) */ ++ beq 82f ++ .if backwards ++ sub tmp, base, #1 ++ bic tmp, tmp, #31 ++ .else ++ bic tmp, base, #31 ++ .endif ++ bcc 81f ++ .if backwards ++ pld [tmp, #-32*(prefetch_distance+1)] ++81: ++ pld [tmp, #-32*prefetch_distance] ++ .else ++ pld [tmp, #32*(prefetch_distance+2)] ++81: ++ pld [tmp, #32*(prefetch_distance+1)] ++ .endif ++82: ++.endm ++ ++.macro preload_all backwards, narrow_case, shift, base, remain, tmp0, tmp1 ++ .if backwards ++ sub tmp0, base, #1 ++ bic tmp0, tmp0, #31 ++ pld [tmp0] ++ sub tmp1, base, remain, lsl #shift ++ .else ++ bic tmp0, base, #31 ++ pld [tmp0] ++ add tmp1, base, remain, lsl #shift ++ sub tmp1, tmp1, #1 ++ .endif ++ bic tmp1, tmp1, #31 ++ cmp tmp1, tmp0 ++ beq 92f ++ .if narrow_case ++ /* In this case, all the data fits in either 1 or 2 cache lines */ ++ pld [tmp1] ++ .else ++91: ++ .if backwards ++ sub tmp0, tmp0, #32 ++ .else ++ add tmp0, tmp0, #32 ++ .endif ++ cmp tmp0, tmp1 ++ pld [tmp0] ++ bne 91b ++ .endif ++92: ++.endm +--- a/arch/arm/lib/copy_from_user.S ++++ b/arch/arm/lib/copy_from_user.S +@@ -89,11 +89,13 @@ + + .text + +-ENTRY(arm_copy_from_user) ++ENTRY(__copy_from_user_std) ++WEAK(arm_copy_from_user) + + #include "copy_template.S" + + ENDPROC(arm_copy_from_user) ++ENDPROC(__copy_from_user_std) + + .pushsection .fixup,"ax" + .align 0 +--- /dev/null ++++ b/arch/arm/lib/exports_rpi.c +@@ -0,0 +1,37 @@ ++/** ++ * Copyright (c) 2014, Raspberry Pi (Trading) Ltd. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") version 2, as published by the Free ++ * Software Foundation. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++ ++EXPORT_SYMBOL(memcmp); +--- /dev/null ++++ b/arch/arm/lib/memcmp_rpi.S +@@ -0,0 +1,285 @@ ++/* ++Copyright (c) 2013, Raspberry Pi Foundation ++Copyright (c) 2013, RISC OS Open Ltd ++All rights reserved. ++ ++Redistribution and use in source and binary forms, with or without ++modification, are permitted provided that the following conditions are met: ++ * Redistributions of source code must retain the above copyright ++ notice, this list of conditions and the following disclaimer. ++ * Redistributions in binary form must reproduce the above copyright ++ notice, this list of conditions and the following disclaimer in the ++ documentation and/or other materials provided with the distribution. ++ * Neither the name of the copyright holder nor the ++ names of its contributors may be used to endorse or promote products ++ derived from this software without specific prior written permission. ++ ++THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY ++DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++*/ ++ ++#include ++#include "arm-mem.h" ++ ++/* Prevent the stack from becoming executable */ ++#if defined(__linux__) && defined(__ELF__) ++.section .note.GNU-stack,"",%progbits ++#endif ++ ++ .text ++ .arch armv6 ++ .object_arch armv4 ++ .arm ++ .altmacro ++ .p2align 2 ++ ++.macro memcmp_process_head unaligned ++ .if unaligned ++ ldr DAT0, [S_1], #4 ++ ldr DAT1, [S_1], #4 ++ ldr DAT2, [S_1], #4 ++ ldr DAT3, [S_1], #4 ++ .else ++ ldmia S_1!, {DAT0, DAT1, DAT2, DAT3} ++ .endif ++ ldmia S_2!, {DAT4, DAT5, DAT6, DAT7} ++.endm ++ ++.macro memcmp_process_tail ++ cmp DAT0, DAT4 ++ cmpeq DAT1, DAT5 ++ cmpeq DAT2, DAT6 ++ cmpeq DAT3, DAT7 ++ bne 200f ++.endm ++ ++.macro memcmp_leading_31bytes ++ movs DAT0, OFF, lsl #31 ++ ldrmib DAT0, [S_1], #1 ++ ldrcsh DAT1, [S_1], #2 ++ ldrmib DAT4, [S_2], #1 ++ ldrcsh DAT5, [S_2], #2 ++ movpl DAT0, #0 ++ movcc DAT1, #0 ++ movpl DAT4, #0 ++ movcc DAT5, #0 ++ submi N, N, #1 ++ subcs N, N, #2 ++ cmp DAT0, DAT4 ++ cmpeq DAT1, DAT5 ++ bne 200f ++ movs DAT0, OFF, lsl #29 ++ ldrmi DAT0, [S_1], #4 ++ ldrcs DAT1, [S_1], #4 ++ ldrcs DAT2, [S_1], #4 ++ ldrmi DAT4, [S_2], #4 ++ ldmcsia S_2!, {DAT5, DAT6} ++ movpl DAT0, #0 ++ movcc DAT1, #0 ++ movcc DAT2, #0 ++ movpl DAT4, #0 ++ movcc DAT5, #0 ++ movcc DAT6, #0 ++ submi N, N, #4 ++ subcs N, N, #8 ++ cmp DAT0, DAT4 ++ cmpeq DAT1, DAT5 ++ cmpeq DAT2, DAT6 ++ bne 200f ++ tst OFF, #16 ++ beq 105f ++ memcmp_process_head 1 ++ sub N, N, #16 ++ memcmp_process_tail ++105: ++.endm ++ ++.macro memcmp_trailing_15bytes unaligned ++ movs N, N, lsl #29 ++ .if unaligned ++ ldrcs DAT0, [S_1], #4 ++ ldrcs DAT1, [S_1], #4 ++ .else ++ ldmcsia S_1!, {DAT0, DAT1} ++ .endif ++ ldrmi DAT2, [S_1], #4 ++ ldmcsia S_2!, {DAT4, DAT5} ++ ldrmi DAT6, [S_2], #4 ++ movcc DAT0, #0 ++ movcc DAT1, #0 ++ movpl DAT2, #0 ++ movcc DAT4, #0 ++ movcc DAT5, #0 ++ movpl DAT6, #0 ++ cmp DAT0, DAT4 ++ cmpeq DAT1, DAT5 ++ cmpeq DAT2, DAT6 ++ bne 200f ++ movs N, N, lsl #2 ++ ldrcsh DAT0, [S_1], #2 ++ ldrmib DAT1, [S_1] ++ ldrcsh DAT4, [S_2], #2 ++ ldrmib DAT5, [S_2] ++ movcc DAT0, #0 ++ movpl DAT1, #0 ++ movcc DAT4, #0 ++ movpl DAT5, #0 ++ cmp DAT0, DAT4 ++ cmpeq DAT1, DAT5 ++ bne 200f ++.endm ++ ++.macro memcmp_long_inner_loop unaligned ++110: ++ memcmp_process_head unaligned ++ pld [S_2, #prefetch_distance*32 + 16] ++ memcmp_process_tail ++ memcmp_process_head unaligned ++ pld [S_1, OFF] ++ memcmp_process_tail ++ subs N, N, #32 ++ bhs 110b ++ /* Just before the final (prefetch_distance+1) 32-byte blocks, ++ * deal with final preloads */ ++ preload_trailing 0, S_1, N, DAT0 ++ preload_trailing 0, S_2, N, DAT0 ++ add N, N, #(prefetch_distance+2)*32 - 16 ++120: ++ memcmp_process_head unaligned ++ memcmp_process_tail ++ subs N, N, #16 ++ bhs 120b ++ /* Trailing words and bytes */ ++ tst N, #15 ++ beq 199f ++ memcmp_trailing_15bytes unaligned ++199: /* Reached end without detecting a difference */ ++ mov a1, #0 ++ setend le ++ pop {DAT1-DAT6, pc} ++.endm ++ ++.macro memcmp_short_inner_loop unaligned ++ subs N, N, #16 /* simplifies inner loop termination */ ++ blo 122f ++120: ++ memcmp_process_head unaligned ++ memcmp_process_tail ++ subs N, N, #16 ++ bhs 120b ++122: /* Trailing words and bytes */ ++ tst N, #15 ++ beq 199f ++ memcmp_trailing_15bytes unaligned ++199: /* Reached end without detecting a difference */ ++ mov a1, #0 ++ setend le ++ pop {DAT1-DAT6, pc} ++.endm ++ ++/* ++ * int memcmp(const void *s1, const void *s2, size_t n); ++ * On entry: ++ * a1 = pointer to buffer 1 ++ * a2 = pointer to buffer 2 ++ * a3 = number of bytes to compare (as unsigned chars) ++ * On exit: ++ * a1 = >0/=0/<0 if s1 >/=/< s2 ++ */ ++ ++.set prefetch_distance, 2 ++ ++ENTRY(memcmp) ++ S_1 .req a1 ++ S_2 .req a2 ++ N .req a3 ++ DAT0 .req a4 ++ DAT1 .req v1 ++ DAT2 .req v2 ++ DAT3 .req v3 ++ DAT4 .req v4 ++ DAT5 .req v5 ++ DAT6 .req v6 ++ DAT7 .req ip ++ OFF .req lr ++ ++ push {DAT1-DAT6, lr} ++ setend be /* lowest-addressed bytes are most significant */ ++ ++ /* To preload ahead as we go, we need at least (prefetch_distance+2) 32-byte blocks */ ++ cmp N, #(prefetch_distance+3)*32 - 1 ++ blo 170f ++ ++ /* Long case */ ++ /* Adjust N so that the decrement instruction can also test for ++ * inner loop termination. We want it to stop when there are ++ * (prefetch_distance+1) complete blocks to go. */ ++ sub N, N, #(prefetch_distance+2)*32 ++ preload_leading_step1 0, DAT0, S_1 ++ preload_leading_step1 0, DAT1, S_2 ++ tst S_2, #31 ++ beq 154f ++ rsb OFF, S_2, #0 /* no need to AND with 15 here */ ++ preload_leading_step2 0, DAT0, S_1, OFF, DAT2 ++ preload_leading_step2 0, DAT1, S_2, OFF, DAT2 ++ memcmp_leading_31bytes ++154: /* Second source now cacheline (32-byte) aligned; we have at ++ * least one prefetch to go. */ ++ /* Prefetch offset is best selected such that it lies in the ++ * first 8 of each 32 bytes - but it's just as easy to aim for ++ * the first one */ ++ and OFF, S_1, #31 ++ rsb OFF, OFF, #32*prefetch_distance ++ tst S_1, #3 ++ bne 140f ++ memcmp_long_inner_loop 0 ++140: memcmp_long_inner_loop 1 ++ ++170: /* Short case */ ++ teq N, #0 ++ beq 199f ++ preload_all 0, 0, 0, S_1, N, DAT0, DAT1 ++ preload_all 0, 0, 0, S_2, N, DAT0, DAT1 ++ tst S_2, #3 ++ beq 174f ++172: subs N, N, #1 ++ blo 199f ++ ldrb DAT0, [S_1], #1 ++ ldrb DAT4, [S_2], #1 ++ cmp DAT0, DAT4 ++ bne 200f ++ tst S_2, #3 ++ bne 172b ++174: /* Second source now 4-byte aligned; we have 0 or more bytes to go */ ++ tst S_1, #3 ++ bne 140f ++ memcmp_short_inner_loop 0 ++140: memcmp_short_inner_loop 1 ++ ++200: /* Difference found: determine sign. */ ++ movhi a1, #1 ++ movlo a1, #-1 ++ setend le ++ pop {DAT1-DAT6, pc} ++ ++ .unreq S_1 ++ .unreq S_2 ++ .unreq N ++ .unreq DAT0 ++ .unreq DAT1 ++ .unreq DAT2 ++ .unreq DAT3 ++ .unreq DAT4 ++ .unreq DAT5 ++ .unreq DAT6 ++ .unreq DAT7 ++ .unreq OFF ++ENDPROC(memcmp) +--- /dev/null ++++ b/arch/arm/lib/memcpy_rpi.S +@@ -0,0 +1,61 @@ ++/* ++Copyright (c) 2013, Raspberry Pi Foundation ++Copyright (c) 2013, RISC OS Open Ltd ++All rights reserved. ++ ++Redistribution and use in source and binary forms, with or without ++modification, are permitted provided that the following conditions are met: ++ * Redistributions of source code must retain the above copyright ++ notice, this list of conditions and the following disclaimer. ++ * Redistributions in binary form must reproduce the above copyright ++ notice, this list of conditions and the following disclaimer in the ++ documentation and/or other materials provided with the distribution. ++ * Neither the name of the copyright holder nor the ++ names of its contributors may be used to endorse or promote products ++ derived from this software without specific prior written permission. ++ ++THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY ++DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++*/ ++ ++#include ++#include "arm-mem.h" ++#include "memcpymove.h" ++ ++/* Prevent the stack from becoming executable */ ++#if defined(__linux__) && defined(__ELF__) ++.section .note.GNU-stack,"",%progbits ++#endif ++ ++ .text ++ .arch armv6 ++ .object_arch armv4 ++ .arm ++ .altmacro ++ .p2align 2 ++ ++/* ++ * void *memcpy(void * restrict s1, const void * restrict s2, size_t n); ++ * On entry: ++ * a1 = pointer to destination ++ * a2 = pointer to source ++ * a3 = number of bytes to copy ++ * On exit: ++ * a1 preserved ++ */ ++ ++.set prefetch_distance, 3 ++ ++ENTRY(mmiocpy) ++ENTRY(memcpy) ++ memcpy 0 ++ENDPROC(memcpy) ++ENDPROC(mmiocpy) +--- /dev/null ++++ b/arch/arm/lib/memcpymove.h +@@ -0,0 +1,506 @@ ++/* ++Copyright (c) 2013, Raspberry Pi Foundation ++Copyright (c) 2013, RISC OS Open Ltd ++All rights reserved. ++ ++Redistribution and use in source and binary forms, with or without ++modification, are permitted provided that the following conditions are met: ++ * Redistributions of source code must retain the above copyright ++ notice, this list of conditions and the following disclaimer. ++ * Redistributions in binary form must reproduce the above copyright ++ notice, this list of conditions and the following disclaimer in the ++ documentation and/or other materials provided with the distribution. ++ * Neither the name of the copyright holder nor the ++ names of its contributors may be used to endorse or promote products ++ derived from this software without specific prior written permission. ++ ++THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY ++DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++*/ ++ ++.macro unaligned_words backwards, align, use_pld, words, r0, r1, r2, r3, r4, r5, r6, r7, r8 ++ .if words == 1 ++ .if backwards ++ mov r1, r0, lsl #32-align*8 ++ ldr r0, [S, #-4]! ++ orr r1, r1, r0, lsr #align*8 ++ str r1, [D, #-4]! ++ .else ++ mov r0, r1, lsr #align*8 ++ ldr r1, [S, #4]! ++ orr r0, r0, r1, lsl #32-align*8 ++ str r0, [D], #4 ++ .endif ++ .elseif words == 2 ++ .if backwards ++ ldr r1, [S, #-4]! ++ mov r2, r0, lsl #32-align*8 ++ ldr r0, [S, #-4]! ++ orr r2, r2, r1, lsr #align*8 ++ mov r1, r1, lsl #32-align*8 ++ orr r1, r1, r0, lsr #align*8 ++ stmdb D!, {r1, r2} ++ .else ++ ldr r1, [S, #4]! ++ mov r0, r2, lsr #align*8 ++ ldr r2, [S, #4]! ++ orr r0, r0, r1, lsl #32-align*8 ++ mov r1, r1, lsr #align*8 ++ orr r1, r1, r2, lsl #32-align*8 ++ stmia D!, {r0, r1} ++ .endif ++ .elseif words == 4 ++ .if backwards ++ ldmdb S!, {r2, r3} ++ mov r4, r0, lsl #32-align*8 ++ ldmdb S!, {r0, r1} ++ orr r4, r4, r3, lsr #align*8 ++ mov r3, r3, lsl #32-align*8 ++ orr r3, r3, r2, lsr #align*8 ++ mov r2, r2, lsl #32-align*8 ++ orr r2, r2, r1, lsr #align*8 ++ mov r1, r1, lsl #32-align*8 ++ orr r1, r1, r0, lsr #align*8 ++ stmdb D!, {r1, r2, r3, r4} ++ .else ++ ldmib S!, {r1, r2} ++ mov r0, r4, lsr #align*8 ++ ldmib S!, {r3, r4} ++ orr r0, r0, r1, lsl #32-align*8 ++ mov r1, r1, lsr #align*8 ++ orr r1, r1, r2, lsl #32-align*8 ++ mov r2, r2, lsr #align*8 ++ orr r2, r2, r3, lsl #32-align*8 ++ mov r3, r3, lsr #align*8 ++ orr r3, r3, r4, lsl #32-align*8 ++ stmia D!, {r0, r1, r2, r3} ++ .endif ++ .elseif words == 8 ++ .if backwards ++ ldmdb S!, {r4, r5, r6, r7} ++ mov r8, r0, lsl #32-align*8 ++ ldmdb S!, {r0, r1, r2, r3} ++ .if use_pld ++ pld [S, OFF] ++ .endif ++ orr r8, r8, r7, lsr #align*8 ++ mov r7, r7, lsl #32-align*8 ++ orr r7, r7, r6, lsr #align*8 ++ mov r6, r6, lsl #32-align*8 ++ orr r6, r6, r5, lsr #align*8 ++ mov r5, r5, lsl #32-align*8 ++ orr r5, r5, r4, lsr #align*8 ++ mov r4, r4, lsl #32-align*8 ++ orr r4, r4, r3, lsr #align*8 ++ mov r3, r3, lsl #32-align*8 ++ orr r3, r3, r2, lsr #align*8 ++ mov r2, r2, lsl #32-align*8 ++ orr r2, r2, r1, lsr #align*8 ++ mov r1, r1, lsl #32-align*8 ++ orr r1, r1, r0, lsr #align*8 ++ stmdb D!, {r5, r6, r7, r8} ++ stmdb D!, {r1, r2, r3, r4} ++ .else ++ ldmib S!, {r1, r2, r3, r4} ++ mov r0, r8, lsr #align*8 ++ ldmib S!, {r5, r6, r7, r8} ++ .if use_pld ++ pld [S, OFF] ++ .endif ++ orr r0, r0, r1, lsl #32-align*8 ++ mov r1, r1, lsr #align*8 ++ orr r1, r1, r2, lsl #32-align*8 ++ mov r2, r2, lsr #align*8 ++ orr r2, r2, r3, lsl #32-align*8 ++ mov r3, r3, lsr #align*8 ++ orr r3, r3, r4, lsl #32-align*8 ++ mov r4, r4, lsr #align*8 ++ orr r4, r4, r5, lsl #32-align*8 ++ mov r5, r5, lsr #align*8 ++ orr r5, r5, r6, lsl #32-align*8 ++ mov r6, r6, lsr #align*8 ++ orr r6, r6, r7, lsl #32-align*8 ++ mov r7, r7, lsr #align*8 ++ orr r7, r7, r8, lsl #32-align*8 ++ stmia D!, {r0, r1, r2, r3} ++ stmia D!, {r4, r5, r6, r7} ++ .endif ++ .endif ++.endm ++ ++.macro memcpy_leading_15bytes backwards, align ++ movs DAT1, DAT2, lsl #31 ++ sub N, N, DAT2 ++ .if backwards ++ ldrmib DAT0, [S, #-1]! ++ ldrcsh DAT1, [S, #-2]! ++ strmib DAT0, [D, #-1]! ++ strcsh DAT1, [D, #-2]! ++ .else ++ ldrmib DAT0, [S], #1 ++ ldrcsh DAT1, [S], #2 ++ strmib DAT0, [D], #1 ++ strcsh DAT1, [D], #2 ++ .endif ++ movs DAT1, DAT2, lsl #29 ++ .if backwards ++ ldrmi DAT0, [S, #-4]! ++ .if align == 0 ++ ldmcsdb S!, {DAT1, DAT2} ++ .else ++ ldrcs DAT2, [S, #-4]! ++ ldrcs DAT1, [S, #-4]! ++ .endif ++ strmi DAT0, [D, #-4]! ++ stmcsdb D!, {DAT1, DAT2} ++ .else ++ ldrmi DAT0, [S], #4 ++ .if align == 0 ++ ldmcsia S!, {DAT1, DAT2} ++ .else ++ ldrcs DAT1, [S], #4 ++ ldrcs DAT2, [S], #4 ++ .endif ++ strmi DAT0, [D], #4 ++ stmcsia D!, {DAT1, DAT2} ++ .endif ++.endm ++ ++.macro memcpy_trailing_15bytes backwards, align ++ movs N, N, lsl #29 ++ .if backwards ++ .if align == 0 ++ ldmcsdb S!, {DAT0, DAT1} ++ .else ++ ldrcs DAT1, [S, #-4]! ++ ldrcs DAT0, [S, #-4]! ++ .endif ++ ldrmi DAT2, [S, #-4]! ++ stmcsdb D!, {DAT0, DAT1} ++ strmi DAT2, [D, #-4]! ++ .else ++ .if align == 0 ++ ldmcsia S!, {DAT0, DAT1} ++ .else ++ ldrcs DAT0, [S], #4 ++ ldrcs DAT1, [S], #4 ++ .endif ++ ldrmi DAT2, [S], #4 ++ stmcsia D!, {DAT0, DAT1} ++ strmi DAT2, [D], #4 ++ .endif ++ movs N, N, lsl #2 ++ .if backwards ++ ldrcsh DAT0, [S, #-2]! ++ ldrmib DAT1, [S, #-1] ++ strcsh DAT0, [D, #-2]! ++ strmib DAT1, [D, #-1] ++ .else ++ ldrcsh DAT0, [S], #2 ++ ldrmib DAT1, [S] ++ strcsh DAT0, [D], #2 ++ strmib DAT1, [D] ++ .endif ++.endm ++ ++.macro memcpy_long_inner_loop backwards, align ++ .if align != 0 ++ .if backwards ++ ldr DAT0, [S, #-align]! ++ .else ++ ldr LAST, [S, #-align]! ++ .endif ++ .endif ++110: ++ .if align == 0 ++ .if backwards ++ ldmdb S!, {DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, LAST} ++ pld [S, OFF] ++ stmdb D!, {DAT4, DAT5, DAT6, LAST} ++ stmdb D!, {DAT0, DAT1, DAT2, DAT3} ++ .else ++ ldmia S!, {DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, LAST} ++ pld [S, OFF] ++ stmia D!, {DAT0, DAT1, DAT2, DAT3} ++ stmia D!, {DAT4, DAT5, DAT6, LAST} ++ .endif ++ .else ++ unaligned_words backwards, align, 1, 8, DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, DAT7, LAST ++ .endif ++ subs N, N, #32 ++ bhs 110b ++ /* Just before the final (prefetch_distance+1) 32-byte blocks, deal with final preloads */ ++ preload_trailing backwards, S, N, OFF ++ add N, N, #(prefetch_distance+2)*32 - 32 ++120: ++ .if align == 0 ++ .if backwards ++ ldmdb S!, {DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, LAST} ++ stmdb D!, {DAT4, DAT5, DAT6, LAST} ++ stmdb D!, {DAT0, DAT1, DAT2, DAT3} ++ .else ++ ldmia S!, {DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, LAST} ++ stmia D!, {DAT0, DAT1, DAT2, DAT3} ++ stmia D!, {DAT4, DAT5, DAT6, LAST} ++ .endif ++ .else ++ unaligned_words backwards, align, 0, 8, DAT0, DAT1, DAT2, DAT3, DAT4, DAT5, DAT6, DAT7, LAST ++ .endif ++ subs N, N, #32 ++ bhs 120b ++ tst N, #16 ++ .if align == 0 ++ .if backwards ++ ldmnedb S!, {DAT0, DAT1, DAT2, LAST} ++ stmnedb D!, {DAT0, DAT1, DAT2, LAST} ++ .else ++ ldmneia S!, {DAT0, DAT1, DAT2, LAST} ++ stmneia D!, {DAT0, DAT1, DAT2, LAST} ++ .endif ++ .else ++ beq 130f ++ unaligned_words backwards, align, 0, 4, DAT0, DAT1, DAT2, DAT3, LAST ++130: ++ .endif ++ /* Trailing words and bytes */ ++ tst N, #15 ++ beq 199f ++ .if align != 0 ++ add S, S, #align ++ .endif ++ memcpy_trailing_15bytes backwards, align ++199: ++ pop {DAT3, DAT4, DAT5, DAT6, DAT7} ++ pop {D, DAT1, DAT2, pc} ++.endm ++ ++.macro memcpy_medium_inner_loop backwards, align ++120: ++ .if backwards ++ .if align == 0 ++ ldmdb S!, {DAT0, DAT1, DAT2, LAST} ++ .else ++ ldr LAST, [S, #-4]! ++ ldr DAT2, [S, #-4]! ++ ldr DAT1, [S, #-4]! ++ ldr DAT0, [S, #-4]! ++ .endif ++ stmdb D!, {DAT0, DAT1, DAT2, LAST} ++ .else ++ .if align == 0 ++ ldmia S!, {DAT0, DAT1, DAT2, LAST} ++ .else ++ ldr DAT0, [S], #4 ++ ldr DAT1, [S], #4 ++ ldr DAT2, [S], #4 ++ ldr LAST, [S], #4 ++ .endif ++ stmia D!, {DAT0, DAT1, DAT2, LAST} ++ .endif ++ subs N, N, #16 ++ bhs 120b ++ /* Trailing words and bytes */ ++ tst N, #15 ++ beq 199f ++ memcpy_trailing_15bytes backwards, align ++199: ++ pop {D, DAT1, DAT2, pc} ++.endm ++ ++.macro memcpy_short_inner_loop backwards, align ++ tst N, #16 ++ .if backwards ++ .if align == 0 ++ ldmnedb S!, {DAT0, DAT1, DAT2, LAST} ++ .else ++ ldrne LAST, [S, #-4]! ++ ldrne DAT2, [S, #-4]! ++ ldrne DAT1, [S, #-4]! ++ ldrne DAT0, [S, #-4]! ++ .endif ++ stmnedb D!, {DAT0, DAT1, DAT2, LAST} ++ .else ++ .if align == 0 ++ ldmneia S!, {DAT0, DAT1, DAT2, LAST} ++ .else ++ ldrne DAT0, [S], #4 ++ ldrne DAT1, [S], #4 ++ ldrne DAT2, [S], #4 ++ ldrne LAST, [S], #4 ++ .endif ++ stmneia D!, {DAT0, DAT1, DAT2, LAST} ++ .endif ++ memcpy_trailing_15bytes backwards, align ++199: ++ pop {D, DAT1, DAT2, pc} ++.endm ++ ++.macro memcpy backwards ++ D .req a1 ++ S .req a2 ++ N .req a3 ++ DAT0 .req a4 ++ DAT1 .req v1 ++ DAT2 .req v2 ++ DAT3 .req v3 ++ DAT4 .req v4 ++ DAT5 .req v5 ++ DAT6 .req v6 ++ DAT7 .req sl ++ LAST .req ip ++ OFF .req lr ++ ++ .cfi_startproc ++ ++ push {D, DAT1, DAT2, lr} ++ ++ .cfi_def_cfa_offset 16 ++ .cfi_rel_offset D, 0 ++ .cfi_undefined S ++ .cfi_undefined N ++ .cfi_undefined DAT0 ++ .cfi_rel_offset DAT1, 4 ++ .cfi_rel_offset DAT2, 8 ++ .cfi_undefined LAST ++ .cfi_rel_offset lr, 12 ++ ++ .if backwards ++ add D, D, N ++ add S, S, N ++ .endif ++ ++ /* See if we're guaranteed to have at least one 16-byte aligned 16-byte write */ ++ cmp N, #31 ++ blo 170f ++ /* To preload ahead as we go, we need at least (prefetch_distance+2) 32-byte blocks */ ++ cmp N, #(prefetch_distance+3)*32 - 1 ++ blo 160f ++ ++ /* Long case */ ++ push {DAT3, DAT4, DAT5, DAT6, DAT7} ++ ++ .cfi_def_cfa_offset 36 ++ .cfi_rel_offset D, 20 ++ .cfi_rel_offset DAT1, 24 ++ .cfi_rel_offset DAT2, 28 ++ .cfi_rel_offset DAT3, 0 ++ .cfi_rel_offset DAT4, 4 ++ .cfi_rel_offset DAT5, 8 ++ .cfi_rel_offset DAT6, 12 ++ .cfi_rel_offset DAT7, 16 ++ .cfi_rel_offset lr, 32 ++ ++ /* Adjust N so that the decrement instruction can also test for ++ * inner loop termination. We want it to stop when there are ++ * (prefetch_distance+1) complete blocks to go. */ ++ sub N, N, #(prefetch_distance+2)*32 ++ preload_leading_step1 backwards, DAT0, S ++ .if backwards ++ /* Bug in GAS: it accepts, but mis-assembles the instruction ++ * ands DAT2, D, #60, 2 ++ * which sets DAT2 to the number of leading bytes until destination is aligned and also clears C (sets borrow) ++ */ ++ .word 0xE210513C ++ beq 154f ++ .else ++ ands DAT2, D, #15 ++ beq 154f ++ rsb DAT2, DAT2, #16 /* number of leading bytes until destination aligned */ ++ .endif ++ preload_leading_step2 backwards, DAT0, S, DAT2, OFF ++ memcpy_leading_15bytes backwards, 1 ++154: /* Destination now 16-byte aligned; we have at least one prefetch as well as at least one 16-byte output block */ ++ /* Prefetch offset is best selected such that it lies in the first 8 of each 32 bytes - but it's just as easy to aim for the first one */ ++ .if backwards ++ rsb OFF, S, #3 ++ and OFF, OFF, #28 ++ sub OFF, OFF, #32*(prefetch_distance+1) ++ .else ++ and OFF, S, #28 ++ rsb OFF, OFF, #32*prefetch_distance ++ .endif ++ movs DAT0, S, lsl #31 ++ bhi 157f ++ bcs 156f ++ bmi 155f ++ memcpy_long_inner_loop backwards, 0 ++155: memcpy_long_inner_loop backwards, 1 ++156: memcpy_long_inner_loop backwards, 2 ++157: memcpy_long_inner_loop backwards, 3 ++ ++ .cfi_def_cfa_offset 16 ++ .cfi_rel_offset D, 0 ++ .cfi_rel_offset DAT1, 4 ++ .cfi_rel_offset DAT2, 8 ++ .cfi_same_value DAT3 ++ .cfi_same_value DAT4 ++ .cfi_same_value DAT5 ++ .cfi_same_value DAT6 ++ .cfi_same_value DAT7 ++ .cfi_rel_offset lr, 12 ++ ++160: /* Medium case */ ++ preload_all backwards, 0, 0, S, N, DAT2, OFF ++ sub N, N, #16 /* simplifies inner loop termination */ ++ .if backwards ++ ands DAT2, D, #15 ++ beq 164f ++ .else ++ ands DAT2, D, #15 ++ beq 164f ++ rsb DAT2, DAT2, #16 ++ .endif ++ memcpy_leading_15bytes backwards, align ++164: /* Destination now 16-byte aligned; we have at least one 16-byte output block */ ++ tst S, #3 ++ bne 140f ++ memcpy_medium_inner_loop backwards, 0 ++140: memcpy_medium_inner_loop backwards, 1 ++ ++170: /* Short case, less than 31 bytes, so no guarantee of at least one 16-byte block */ ++ teq N, #0 ++ beq 199f ++ preload_all backwards, 1, 0, S, N, DAT2, LAST ++ tst D, #3 ++ beq 174f ++172: subs N, N, #1 ++ blo 199f ++ .if backwards ++ ldrb DAT0, [S, #-1]! ++ strb DAT0, [D, #-1]! ++ .else ++ ldrb DAT0, [S], #1 ++ strb DAT0, [D], #1 ++ .endif ++ tst D, #3 ++ bne 172b ++174: /* Destination now 4-byte aligned; we have 0 or more output bytes to go */ ++ tst S, #3 ++ bne 140f ++ memcpy_short_inner_loop backwards, 0 ++140: memcpy_short_inner_loop backwards, 1 ++ ++ .cfi_endproc ++ ++ .unreq D ++ .unreq S ++ .unreq N ++ .unreq DAT0 ++ .unreq DAT1 ++ .unreq DAT2 ++ .unreq DAT3 ++ .unreq DAT4 ++ .unreq DAT5 ++ .unreq DAT6 ++ .unreq DAT7 ++ .unreq LAST ++ .unreq OFF ++.endm +--- /dev/null ++++ b/arch/arm/lib/memmove_rpi.S +@@ -0,0 +1,61 @@ ++/* ++Copyright (c) 2013, Raspberry Pi Foundation ++Copyright (c) 2013, RISC OS Open Ltd ++All rights reserved. ++ ++Redistribution and use in source and binary forms, with or without ++modification, are permitted provided that the following conditions are met: ++ * Redistributions of source code must retain the above copyright ++ notice, this list of conditions and the following disclaimer. ++ * Redistributions in binary form must reproduce the above copyright ++ notice, this list of conditions and the following disclaimer in the ++ documentation and/or other materials provided with the distribution. ++ * Neither the name of the copyright holder nor the ++ names of its contributors may be used to endorse or promote products ++ derived from this software without specific prior written permission. ++ ++THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY ++DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++*/ ++ ++#include ++#include "arm-mem.h" ++#include "memcpymove.h" ++ ++/* Prevent the stack from becoming executable */ ++#if defined(__linux__) && defined(__ELF__) ++.section .note.GNU-stack,"",%progbits ++#endif ++ ++ .text ++ .arch armv6 ++ .object_arch armv4 ++ .arm ++ .altmacro ++ .p2align 2 ++ ++/* ++ * void *memmove(void *s1, const void *s2, size_t n); ++ * On entry: ++ * a1 = pointer to destination ++ * a2 = pointer to source ++ * a3 = number of bytes to copy ++ * On exit: ++ * a1 preserved ++ */ ++ ++.set prefetch_distance, 3 ++ ++ENTRY(memmove) ++ cmp a2, a1 ++ bpl memcpy /* pl works even over -1 - 0 and 0x7fffffff - 0x80000000 boundaries */ ++ memcpy 1 ++ENDPROC(memmove) +--- /dev/null ++++ b/arch/arm/lib/memset_rpi.S +@@ -0,0 +1,123 @@ ++/* ++Copyright (c) 2013, Raspberry Pi Foundation ++Copyright (c) 2013, RISC OS Open Ltd ++All rights reserved. ++ ++Redistribution and use in source and binary forms, with or without ++modification, are permitted provided that the following conditions are met: ++ * Redistributions of source code must retain the above copyright ++ notice, this list of conditions and the following disclaimer. ++ * Redistributions in binary form must reproduce the above copyright ++ notice, this list of conditions and the following disclaimer in the ++ documentation and/or other materials provided with the distribution. ++ * Neither the name of the copyright holder nor the ++ names of its contributors may be used to endorse or promote products ++ derived from this software without specific prior written permission. ++ ++THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ++ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY ++DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++*/ ++ ++#include ++#include "arm-mem.h" ++ ++/* Prevent the stack from becoming executable */ ++#if defined(__linux__) && defined(__ELF__) ++.section .note.GNU-stack,"",%progbits ++#endif ++ ++ .text ++ .arch armv6 ++ .object_arch armv4 ++ .arm ++ .altmacro ++ .p2align 2 ++ ++/* ++ * void *memset(void *s, int c, size_t n); ++ * On entry: ++ * a1 = pointer to buffer to fill ++ * a2 = byte pattern to fill with (caller-narrowed) ++ * a3 = number of bytes to fill ++ * On exit: ++ * a1 preserved ++ */ ++ENTRY(mmioset) ++ENTRY(memset) ++ S .req a1 ++ DAT0 .req a2 ++ N .req a3 ++ DAT1 .req a4 ++ DAT2 .req ip ++ DAT3 .req lr ++ ++ orr DAT0, DAT0, lsl #8 ++ push {S, lr} ++ orr DAT0, DAT0, lsl #16 ++ mov DAT1, DAT0 ++ ++ /* See if we're guaranteed to have at least one 16-byte aligned 16-byte write */ ++ cmp N, #31 ++ blo 170f ++ ++161: sub N, N, #16 /* simplifies inner loop termination */ ++ /* Leading words and bytes */ ++ tst S, #15 ++ beq 164f ++ rsb DAT3, S, #0 /* bits 0-3 = number of leading bytes until aligned */ ++ movs DAT2, DAT3, lsl #31 ++ submi N, N, #1 ++ strmib DAT0, [S], #1 ++ subcs N, N, #2 ++ strcsh DAT0, [S], #2 ++ movs DAT2, DAT3, lsl #29 ++ submi N, N, #4 ++ strmi DAT0, [S], #4 ++ subcs N, N, #8 ++ stmcsia S!, {DAT0, DAT1} ++164: /* Delayed set up of DAT2 and DAT3 so we could use them as scratch registers above */ ++ mov DAT2, DAT0 ++ mov DAT3, DAT0 ++ /* Now the inner loop of 16-byte stores */ ++165: stmia S!, {DAT0, DAT1, DAT2, DAT3} ++ subs N, N, #16 ++ bhs 165b ++166: /* Trailing words and bytes */ ++ movs N, N, lsl #29 ++ stmcsia S!, {DAT0, DAT1} ++ strmi DAT0, [S], #4 ++ movs N, N, lsl #2 ++ strcsh DAT0, [S], #2 ++ strmib DAT0, [S] ++199: pop {S, pc} ++ ++170: /* Short case */ ++ mov DAT2, DAT0 ++ mov DAT3, DAT0 ++ tst S, #3 ++ beq 174f ++172: subs N, N, #1 ++ blo 199b ++ strb DAT0, [S], #1 ++ tst S, #3 ++ bne 172b ++174: tst N, #16 ++ stmneia S!, {DAT0, DAT1, DAT2, DAT3} ++ b 166b ++ ++ .unreq S ++ .unreq DAT0 ++ .unreq N ++ .unreq DAT1 ++ .unreq DAT2 ++ .unreq DAT3 ++ENDPROC(memset) ++ENDPROC(mmioset) +--- a/arch/arm/lib/uaccess_with_memcpy.c ++++ b/arch/arm/lib/uaccess_with_memcpy.c +@@ -22,6 +22,14 @@ + #include + #include + ++#ifndef COPY_FROM_USER_THRESHOLD ++#define COPY_FROM_USER_THRESHOLD 64 ++#endif ++ ++#ifndef COPY_TO_USER_THRESHOLD ++#define COPY_TO_USER_THRESHOLD 64 ++#endif ++ + static int + pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) + { +@@ -84,7 +92,44 @@ pin_page_for_write(const void __user *_a + return 1; + } + +-static unsigned long noinline ++static int ++pin_page_for_read(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) ++{ ++ unsigned long addr = (unsigned long)_addr; ++ pgd_t *pgd; ++ pmd_t *pmd; ++ pte_t *pte; ++ pud_t *pud; ++ spinlock_t *ptl; ++ ++ pgd = pgd_offset(current->mm, addr); ++ if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd))) ++ { ++ return 0; ++ } ++ pud = pud_offset(pgd, addr); ++ if (unlikely(pud_none(*pud) || pud_bad(*pud))) ++ { ++ return 0; ++ } ++ ++ pmd = pmd_offset(pud, addr); ++ if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd))) ++ return 0; ++ ++ pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl); ++ if (unlikely(!pte_present(*pte) || !pte_young(*pte))) { ++ pte_unmap_unlock(pte, ptl); ++ return 0; ++ } ++ ++ *ptep = pte; ++ *ptlp = ptl; ++ ++ return 1; ++} ++ ++unsigned long noinline + __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n) + { + unsigned long ua_flags; +@@ -137,6 +182,57 @@ out: + return n; + } + ++unsigned long noinline ++__copy_from_user_memcpy(void *to, const void __user *from, unsigned long n) ++{ ++ unsigned long ua_flags; ++ int atomic; ++ ++ if (unlikely(segment_eq(get_fs(), KERNEL_DS))) { ++ memcpy(to, (const void *)from, n); ++ return 0; ++ } ++ ++ /* the mmap semaphore is taken only if not in an atomic context */ ++ atomic = in_atomic(); ++ ++ if (!atomic) ++ down_read(¤t->mm->mmap_sem); ++ while (n) { ++ pte_t *pte; ++ spinlock_t *ptl; ++ int tocopy; ++ ++ while (!pin_page_for_read(from, &pte, &ptl)) { ++ char temp; ++ if (!atomic) ++ up_read(¤t->mm->mmap_sem); ++ if (__get_user(temp, (char __user *)from)) ++ goto out; ++ if (!atomic) ++ down_read(¤t->mm->mmap_sem); ++ } ++ ++ tocopy = (~(unsigned long)from & ~PAGE_MASK) + 1; ++ if (tocopy > n) ++ tocopy = n; ++ ++ ua_flags = uaccess_save_and_enable(); ++ memcpy(to, (const void *)from, tocopy); ++ uaccess_restore(ua_flags); ++ to += tocopy; ++ from += tocopy; ++ n -= tocopy; ++ ++ pte_unmap_unlock(pte, ptl); ++ } ++ if (!atomic) ++ up_read(¤t->mm->mmap_sem); ++ ++out: ++ return n; ++} ++ + unsigned long + arm_copy_to_user(void __user *to, const void *from, unsigned long n) + { +@@ -147,7 +243,7 @@ arm_copy_to_user(void __user *to, const + * With frame pointer disabled, tail call optimization kicks in + * as well making this test almost invisible. + */ +- if (n < 64) { ++ if (n < COPY_TO_USER_THRESHOLD) { + unsigned long ua_flags = uaccess_save_and_enable(); + n = __copy_to_user_std(to, from, n); + uaccess_restore(ua_flags); +@@ -156,6 +252,26 @@ arm_copy_to_user(void __user *to, const + } + return n; + } ++ ++unsigned long __must_check ++arm_copy_from_user(void *to, const void __user *from, unsigned long n) ++{ ++ /* ++ * This test is stubbed out of the main function above to keep ++ * the overhead for small copies low by avoiding a large ++ * register dump on the stack just to reload them right away. ++ * With frame pointer disabled, tail call optimization kicks in ++ * as well making this test almost invisible. ++ */ ++ if (n < COPY_TO_USER_THRESHOLD) { ++ unsigned long ua_flags = uaccess_save_and_enable(); ++ n = __copy_from_user_std(to, from, n); ++ uaccess_restore(ua_flags); ++ } else { ++ n = __copy_from_user_memcpy(to, from, n); ++ } ++ return n; ++} + + static unsigned long noinline + __clear_user_memset(void __user *addr, unsigned long n) +--- a/arch/arm/mach-bcm/Kconfig ++++ b/arch/arm/mach-bcm/Kconfig +@@ -174,6 +174,13 @@ config ARCH_BCM_53573 + The base chip is BCM53573 and there are some packaging modifications + like BCM47189 and BCM47452. + ++config BCM2835_FAST_MEMCPY ++ bool "Enable optimized __copy_to_user and __copy_from_user" ++ depends on ARCH_BCM2835 && ARCH_MULTI_V6 ++ default y ++ help ++ Optimized versions of __copy_to_user and __copy_from_user for Pi1. ++ + config ARCH_BCM_63XX + bool "Broadcom BCM63xx DSL SoC" + depends on ARCH_MULTI_V7 diff --git a/target/linux/brcm2708/patches-4.9/950-0064-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch b/target/linux/brcm2708/patches-4.9/950-0064-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch new file mode 100644 index 000000000000..5d73a2824662 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0064-gpio-poweroff-Allow-it-to-work-on-Raspberry-Pi.patch @@ -0,0 +1,35 @@ +From 7e8bb86739df17e38a0ebe6e17b7a9056ab421e9 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 25 Jun 2015 12:16:11 +0100 +Subject: [PATCH] gpio-poweroff: Allow it to work on Raspberry Pi + +The Raspberry Pi firmware manages the power-down and reboot +process. To do this it installs a pm_power_off handler, causing +the gpio-poweroff module to abort the probe function. + +This patch introduces a "force" DT property that overrides that +behaviour, and also adds a DT overlay to enable and control it. + +Note that running in an active-low configuration (DT parameter +"active_low") requires a custom dt-blob.bin and probably won't +allow a reboot without switching off, so an external inversion +of the trigger signal may be preferable. +--- + drivers/power/reset/gpio-poweroff.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +--- a/drivers/power/reset/gpio-poweroff.c ++++ b/drivers/power/reset/gpio-poweroff.c +@@ -49,9 +49,11 @@ static int gpio_poweroff_probe(struct pl + { + bool input = false; + enum gpiod_flags flags; ++ bool force = false; + + /* If a pm_power_off function has already been added, leave it alone */ +- if (pm_power_off != NULL) { ++ force = of_property_read_bool(pdev->dev.of_node, "force"); ++ if (!force && (pm_power_off != NULL)) { + dev_err(&pdev->dev, + "%s: pm_power_off function already registered", + __func__); diff --git a/target/linux/brcm2708/patches-4.9/950-0065-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch b/target/linux/brcm2708/patches-4.9/950-0065-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch new file mode 100644 index 000000000000..b5ae3f954cf2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0065-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch @@ -0,0 +1,837 @@ +From 157f59328885549a0f2c1fe35e9ec3aff0f0b52e Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 14 Jul 2015 14:32:47 +0100 +Subject: [PATCH] mfd: Add Raspberry Pi Sense HAT core driver + +--- + drivers/input/joystick/Kconfig | 8 + + drivers/input/joystick/Makefile | 1 + + drivers/input/joystick/rpisense-js.c | 153 ++++++++++++++++ + drivers/mfd/Kconfig | 8 + + drivers/mfd/Makefile | 1 + + drivers/mfd/rpisense-core.c | 157 +++++++++++++++++ + drivers/video/fbdev/Kconfig | 13 ++ + drivers/video/fbdev/Makefile | 1 + + drivers/video/fbdev/rpisense-fb.c | 293 +++++++++++++++++++++++++++++++ + include/linux/mfd/rpisense/core.h | 47 +++++ + include/linux/mfd/rpisense/framebuffer.h | 32 ++++ + include/linux/mfd/rpisense/joystick.h | 35 ++++ + 12 files changed, 749 insertions(+) + create mode 100644 drivers/input/joystick/rpisense-js.c + create mode 100644 drivers/mfd/rpisense-core.c + create mode 100644 drivers/video/fbdev/rpisense-fb.c + create mode 100644 include/linux/mfd/rpisense/core.h + create mode 100644 include/linux/mfd/rpisense/framebuffer.h + create mode 100644 include/linux/mfd/rpisense/joystick.h + +--- a/drivers/input/joystick/Kconfig ++++ b/drivers/input/joystick/Kconfig +@@ -330,4 +330,12 @@ config JOYSTICK_MAPLE + To compile this as a module choose M here: the module will be called + maplecontrol. + ++config JOYSTICK_RPISENSE ++ tristate "Raspberry Pi Sense HAT joystick" ++ depends on GPIOLIB && INPUT ++ select MFD_RPISENSE_CORE ++ ++ help ++ This is the joystick driver for the Raspberry Pi Sense HAT ++ + endif +--- a/drivers/input/joystick/Makefile ++++ b/drivers/input/joystick/Makefile +@@ -32,4 +32,5 @@ obj-$(CONFIG_JOYSTICK_WARRIOR) += warri + obj-$(CONFIG_JOYSTICK_XPAD) += xpad.o + obj-$(CONFIG_JOYSTICK_ZHENHUA) += zhenhua.o + obj-$(CONFIG_JOYSTICK_WALKERA0701) += walkera0701.o ++obj-$(CONFIG_JOYSTICK_RPISENSE) += rpisense-js.o + +--- /dev/null ++++ b/drivers/input/joystick/rpisense-js.c +@@ -0,0 +1,153 @@ ++/* ++ * Raspberry Pi Sense HAT joystick driver ++ * http://raspberrypi.org ++ * ++ * Copyright (C) 2015 Raspberry Pi ++ * ++ * Author: Serge Schneider ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++ ++#include ++ ++#include ++#include ++ ++static struct rpisense *rpisense; ++static unsigned char keymap[5] = {KEY_DOWN, KEY_RIGHT, KEY_UP, KEY_ENTER, KEY_LEFT,}; ++ ++static void keys_work_fn(struct work_struct *work) ++{ ++ int i; ++ static s32 prev_keys; ++ struct rpisense_js *rpisense_js = &rpisense->joystick; ++ s32 keys = rpisense_reg_read(rpisense, RPISENSE_KEYS); ++ s32 changes = keys ^ prev_keys; ++ ++ prev_keys = keys; ++ for (i = 0; i < 5; i++) { ++ if (changes & 1) { ++ input_report_key(rpisense_js->keys_dev, ++ keymap[i], keys & 1); ++ } ++ changes >>= 1; ++ keys >>= 1; ++ } ++ input_sync(rpisense_js->keys_dev); ++} ++ ++static irqreturn_t keys_irq_handler(int irq, void *pdev) ++{ ++ struct rpisense_js *rpisense_js = &rpisense->joystick; ++ ++ schedule_work(&rpisense_js->keys_work_s); ++ return IRQ_HANDLED; ++} ++ ++static int rpisense_js_probe(struct platform_device *pdev) ++{ ++ int ret; ++ int i; ++ struct rpisense_js *rpisense_js; ++ ++ rpisense = rpisense_get_dev(); ++ rpisense_js = &rpisense->joystick; ++ ++ INIT_WORK(&rpisense_js->keys_work_s, keys_work_fn); ++ ++ rpisense_js->keys_dev = input_allocate_device(); ++ if (!rpisense_js->keys_dev) { ++ dev_err(&pdev->dev, "Could not allocate input device.\n"); ++ return -ENOMEM; ++ } ++ ++ rpisense_js->keys_dev->evbit[0] = BIT_MASK(EV_KEY); ++ for (i = 0; i < ARRAY_SIZE(keymap); i++) { ++ set_bit(keymap[i], ++ rpisense_js->keys_dev->keybit); ++ } ++ ++ rpisense_js->keys_dev->name = "Raspberry Pi Sense HAT Joystick"; ++ rpisense_js->keys_dev->phys = "rpi-sense-joy/input0"; ++ rpisense_js->keys_dev->id.bustype = BUS_I2C; ++ rpisense_js->keys_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); ++ rpisense_js->keys_dev->keycode = keymap; ++ rpisense_js->keys_dev->keycodesize = sizeof(unsigned char); ++ rpisense_js->keys_dev->keycodemax = ARRAY_SIZE(keymap); ++ ++ ret = input_register_device(rpisense_js->keys_dev); ++ if (ret) { ++ dev_err(&pdev->dev, "Could not register input device.\n"); ++ goto err_keys_alloc; ++ } ++ ++ ret = gpiod_direction_input(rpisense_js->keys_desc); ++ if (ret) { ++ dev_err(&pdev->dev, "Could not set keys-int direction.\n"); ++ goto err_keys_reg; ++ } ++ ++ rpisense_js->keys_irq = gpiod_to_irq(rpisense_js->keys_desc); ++ if (rpisense_js->keys_irq < 0) { ++ dev_err(&pdev->dev, "Could not determine keys-int IRQ.\n"); ++ ret = rpisense_js->keys_irq; ++ goto err_keys_reg; ++ } ++ ++ ret = devm_request_irq(&pdev->dev, rpisense_js->keys_irq, ++ keys_irq_handler, IRQF_TRIGGER_RISING, ++ "keys", &pdev->dev); ++ if (ret) { ++ dev_err(&pdev->dev, "IRQ request failed.\n"); ++ goto err_keys_reg; ++ } ++ return 0; ++err_keys_reg: ++ input_unregister_device(rpisense_js->keys_dev); ++err_keys_alloc: ++ input_free_device(rpisense_js->keys_dev); ++ return ret; ++} ++ ++static int rpisense_js_remove(struct platform_device *pdev) ++{ ++ struct rpisense_js *rpisense_js = &rpisense->joystick; ++ ++ input_unregister_device(rpisense_js->keys_dev); ++ input_free_device(rpisense_js->keys_dev); ++ return 0; ++} ++ ++#ifdef CONFIG_OF ++static const struct of_device_id rpisense_js_id[] = { ++ { .compatible = "rpi,rpi-sense-js" }, ++ { }, ++}; ++MODULE_DEVICE_TABLE(of, rpisense_js_id); ++#endif ++ ++static struct platform_device_id rpisense_js_device_id[] = { ++ { .name = "rpi-sense-js" }, ++ { }, ++}; ++MODULE_DEVICE_TABLE(platform, rpisense_js_device_id); ++ ++static struct platform_driver rpisense_js_driver = { ++ .probe = rpisense_js_probe, ++ .remove = rpisense_js_remove, ++ .driver = { ++ .name = "rpi-sense-js", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++module_platform_driver(rpisense_js_driver); ++ ++MODULE_DESCRIPTION("Raspberry Pi Sense HAT joystick driver"); ++MODULE_AUTHOR("Serge Schneider "); ++MODULE_LICENSE("GPL"); +--- a/drivers/mfd/Kconfig ++++ b/drivers/mfd/Kconfig +@@ -10,6 +10,14 @@ config MFD_CORE + select IRQ_DOMAIN + default n + ++config MFD_RPISENSE_CORE ++ tristate "Raspberry Pi Sense HAT core functions" ++ depends on I2C ++ select MFD_CORE ++ help ++ This is the core driver for the Raspberry Pi Sense HAT. This provides ++ the necessary functions to communicate with the hardware. ++ + config MFD_CS5535 + tristate "AMD CS5535 and CS5536 southbridge core functions" + select MFD_CORE +--- a/drivers/mfd/Makefile ++++ b/drivers/mfd/Makefile +@@ -211,3 +211,4 @@ obj-$(CONFIG_INTEL_SOC_PMIC) += intel-so + obj-$(CONFIG_MFD_MT6397) += mt6397-core.o + + obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o ++obj-$(CONFIG_MFD_RPISENSE_CORE) += rpisense-core.o +--- /dev/null ++++ b/drivers/mfd/rpisense-core.c +@@ -0,0 +1,157 @@ ++/* ++ * Raspberry Pi Sense HAT core driver ++ * http://raspberrypi.org ++ * ++ * Copyright (C) 2015 Raspberry Pi ++ * ++ * Author: Serge Schneider ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This driver is based on wm8350 implementation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static struct rpisense *rpisense; ++ ++static void rpisense_client_dev_register(struct rpisense *rpisense, ++ const char *name, ++ struct platform_device **pdev) ++{ ++ int ret; ++ ++ *pdev = platform_device_alloc(name, -1); ++ if (*pdev == NULL) { ++ dev_err(rpisense->dev, "Failed to allocate %s\n", name); ++ return; ++ } ++ ++ (*pdev)->dev.parent = rpisense->dev; ++ platform_set_drvdata(*pdev, rpisense); ++ ret = platform_device_add(*pdev); ++ if (ret != 0) { ++ dev_err(rpisense->dev, "Failed to register %s: %d\n", ++ name, ret); ++ platform_device_put(*pdev); ++ *pdev = NULL; ++ } ++} ++ ++static int rpisense_probe(struct i2c_client *i2c, ++ const struct i2c_device_id *id) ++{ ++ int ret; ++ struct rpisense_js *rpisense_js; ++ ++ rpisense = devm_kzalloc(&i2c->dev, sizeof(struct rpisense), GFP_KERNEL); ++ if (rpisense == NULL) ++ return -ENOMEM; ++ ++ i2c_set_clientdata(i2c, rpisense); ++ rpisense->dev = &i2c->dev; ++ rpisense->i2c_client = i2c; ++ ++ ret = rpisense_reg_read(rpisense, RPISENSE_WAI); ++ if (ret > 0) { ++ if (ret != 's') ++ return -EINVAL; ++ } else { ++ return ret; ++ } ++ ret = rpisense_reg_read(rpisense, RPISENSE_VER); ++ if (ret < 0) ++ return ret; ++ ++ dev_info(rpisense->dev, ++ "Raspberry Pi Sense HAT firmware version %i\n", ret); ++ ++ rpisense_js = &rpisense->joystick; ++ rpisense_js->keys_desc = devm_gpiod_get(&i2c->dev, ++ "keys-int", GPIOD_IN); ++ if (IS_ERR(rpisense_js->keys_desc)) { ++ dev_warn(&i2c->dev, "Failed to get keys-int descriptor.\n"); ++ rpisense_js->keys_desc = gpio_to_desc(23); ++ if (rpisense_js->keys_desc == NULL) { ++ dev_err(&i2c->dev, "GPIO23 fallback failed.\n"); ++ return PTR_ERR(rpisense_js->keys_desc); ++ } ++ } ++ rpisense_client_dev_register(rpisense, "rpi-sense-js", ++ &(rpisense->joystick.pdev)); ++ rpisense_client_dev_register(rpisense, "rpi-sense-fb", ++ &(rpisense->framebuffer.pdev)); ++ ++ return 0; ++} ++ ++static int rpisense_remove(struct i2c_client *i2c) ++{ ++ struct rpisense *rpisense = i2c_get_clientdata(i2c); ++ ++ platform_device_unregister(rpisense->joystick.pdev); ++ return 0; ++} ++ ++struct rpisense *rpisense_get_dev(void) ++{ ++ return rpisense; ++} ++EXPORT_SYMBOL_GPL(rpisense_get_dev); ++ ++s32 rpisense_reg_read(struct rpisense *rpisense, int reg) ++{ ++ int ret = i2c_smbus_read_byte_data(rpisense->i2c_client, reg); ++ ++ if (ret < 0) ++ dev_err(rpisense->dev, "Read from reg %d failed\n", reg); ++ /* Due to the BCM270x I2C clock stretching bug, some values ++ * may have MSB set. Clear it to avoid incorrect values. ++ * */ ++ return ret & 0x7F; ++} ++EXPORT_SYMBOL_GPL(rpisense_reg_read); ++ ++int rpisense_block_write(struct rpisense *rpisense, const char *buf, int count) ++{ ++ int ret = i2c_master_send(rpisense->i2c_client, buf, count); ++ ++ if (ret < 0) ++ dev_err(rpisense->dev, "Block write failed\n"); ++ return ret; ++} ++EXPORT_SYMBOL_GPL(rpisense_block_write); ++ ++static const struct i2c_device_id rpisense_i2c_id[] = { ++ { "rpi-sense", 0 }, ++ { } ++}; ++MODULE_DEVICE_TABLE(i2c, rpisense_i2c_id); ++ ++ ++static struct i2c_driver rpisense_driver = { ++ .driver = { ++ .name = "rpi-sense", ++ .owner = THIS_MODULE, ++ }, ++ .probe = rpisense_probe, ++ .remove = rpisense_remove, ++ .id_table = rpisense_i2c_id, ++}; ++ ++module_i2c_driver(rpisense_driver); ++ ++MODULE_DESCRIPTION("Raspberry Pi Sense HAT core driver"); ++MODULE_AUTHOR("Serge Schneider "); ++MODULE_LICENSE("GPL"); ++ +--- a/drivers/video/fbdev/Kconfig ++++ b/drivers/video/fbdev/Kconfig +@@ -2504,3 +2504,16 @@ config FB_SM712 + This driver is also available as a module. The module will be + called sm712fb. If you want to compile it as a module, say M + here and read . ++ ++config FB_RPISENSE ++ tristate "Raspberry Pi Sense HAT framebuffer" ++ depends on FB ++ select MFD_RPISENSE_CORE ++ select FB_SYS_FOPS ++ select FB_SYS_FILLRECT ++ select FB_SYS_COPYAREA ++ select FB_SYS_IMAGEBLIT ++ select FB_DEFERRED_IO ++ ++ help ++ This is the framebuffer driver for the Raspberry Pi Sense HAT +--- a/drivers/video/fbdev/Makefile ++++ b/drivers/video/fbdev/Makefile +@@ -147,6 +147,7 @@ obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o + obj-$(CONFIG_FB_MXS) += mxsfb.o + obj-$(CONFIG_FB_SSD1307) += ssd1307fb.o + obj-$(CONFIG_FB_SIMPLE) += simplefb.o ++obj-$(CONFIG_FB_RPISENSE) += rpisense-fb.o + + # the test framebuffer is last + obj-$(CONFIG_FB_VIRTUAL) += vfb.o +--- /dev/null ++++ b/drivers/video/fbdev/rpisense-fb.c +@@ -0,0 +1,293 @@ ++/* ++ * Raspberry Pi Sense HAT framebuffer driver ++ * http://raspberrypi.org ++ * ++ * Copyright (C) 2015 Raspberry Pi ++ * ++ * Author: Serge Schneider ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++static bool lowlight; ++module_param(lowlight, bool, 0); ++MODULE_PARM_DESC(lowlight, "Reduce LED matrix brightness to one third"); ++ ++static struct rpisense *rpisense; ++ ++struct rpisense_fb_param { ++ char __iomem *vmem; ++ u8 *vmem_work; ++ u32 vmemsize; ++ u8 *gamma; ++}; ++ ++static u8 gamma_default[32] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, ++ 0x02, 0x02, 0x03, 0x03, 0x04, 0x05, 0x06, 0x07, ++ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0E, 0x0F, 0x11, ++ 0x12, 0x14, 0x15, 0x17, 0x19, 0x1B, 0x1D, 0x1F,}; ++ ++static u8 gamma_low[32] = {0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, ++ 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x02, 0x02, ++ 0x03, 0x03, 0x03, 0x04, 0x04, 0x05, 0x05, 0x06, ++ 0x06, 0x07, 0x07, 0x08, 0x08, 0x09, 0x0A, 0x0A,}; ++ ++static u8 gamma_user[32]; ++ ++static struct rpisense_fb_param rpisense_fb_param = { ++ .vmem = NULL, ++ .vmemsize = 128, ++ .gamma = gamma_default, ++}; ++ ++static struct fb_deferred_io rpisense_fb_defio; ++ ++static struct fb_fix_screeninfo rpisense_fb_fix = { ++ .id = "RPi-Sense FB", ++ .type = FB_TYPE_PACKED_PIXELS, ++ .visual = FB_VISUAL_TRUECOLOR, ++ .xpanstep = 0, ++ .ypanstep = 0, ++ .ywrapstep = 0, ++ .accel = FB_ACCEL_NONE, ++ .line_length = 16, ++}; ++ ++static struct fb_var_screeninfo rpisense_fb_var = { ++ .xres = 8, ++ .yres = 8, ++ .xres_virtual = 8, ++ .yres_virtual = 8, ++ .bits_per_pixel = 16, ++ .red = {11, 5, 0}, ++ .green = {5, 6, 0}, ++ .blue = {0, 5, 0}, ++}; ++ ++static ssize_t rpisense_fb_write(struct fb_info *info, ++ const char __user *buf, size_t count, ++ loff_t *ppos) ++{ ++ ssize_t res = fb_sys_write(info, buf, count, ppos); ++ ++ schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay); ++ return res; ++} ++ ++static void rpisense_fb_fillrect(struct fb_info *info, ++ const struct fb_fillrect *rect) ++{ ++ sys_fillrect(info, rect); ++ schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay); ++} ++ ++static void rpisense_fb_copyarea(struct fb_info *info, ++ const struct fb_copyarea *area) ++{ ++ sys_copyarea(info, area); ++ schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay); ++} ++ ++static void rpisense_fb_imageblit(struct fb_info *info, ++ const struct fb_image *image) ++{ ++ sys_imageblit(info, image); ++ schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay); ++} ++ ++static void rpisense_fb_deferred_io(struct fb_info *info, ++ struct list_head *pagelist) ++{ ++ int i; ++ int j; ++ u8 *vmem_work = rpisense_fb_param.vmem_work; ++ u16 *mem = (u16 *)rpisense_fb_param.vmem; ++ u8 *gamma = rpisense_fb_param.gamma; ++ ++ vmem_work[0] = 0; ++ for (j = 0; j < 8; j++) { ++ for (i = 0; i < 8; i++) { ++ vmem_work[(j * 24) + i + 1] = ++ gamma[(mem[(j * 8) + i] >> 11) & 0x1F]; ++ vmem_work[(j * 24) + (i + 8) + 1] = ++ gamma[(mem[(j * 8) + i] >> 6) & 0x1F]; ++ vmem_work[(j * 24) + (i + 16) + 1] = ++ gamma[(mem[(j * 8) + i]) & 0x1F]; ++ } ++ } ++ rpisense_block_write(rpisense, vmem_work, 193); ++} ++ ++static struct fb_deferred_io rpisense_fb_defio = { ++ .delay = HZ/100, ++ .deferred_io = rpisense_fb_deferred_io, ++}; ++ ++static int rpisense_fb_ioctl(struct fb_info *info, unsigned int cmd, ++ unsigned long arg) ++{ ++ switch (cmd) { ++ case SENSEFB_FBIOGET_GAMMA: ++ if (copy_to_user((void __user *) arg, rpisense_fb_param.gamma, ++ sizeof(u8[32]))) ++ return -EFAULT; ++ return 0; ++ case SENSEFB_FBIOSET_GAMMA: ++ if (copy_from_user(gamma_user, (void __user *)arg, ++ sizeof(u8[32]))) ++ return -EFAULT; ++ rpisense_fb_param.gamma = gamma_user; ++ schedule_delayed_work(&info->deferred_work, ++ rpisense_fb_defio.delay); ++ return 0; ++ case SENSEFB_FBIORESET_GAMMA: ++ switch (arg) { ++ case 0: ++ rpisense_fb_param.gamma = gamma_default; ++ break; ++ case 1: ++ rpisense_fb_param.gamma = gamma_low; ++ break; ++ case 2: ++ rpisense_fb_param.gamma = gamma_user; ++ break; ++ default: ++ return -EINVAL; ++ } ++ schedule_delayed_work(&info->deferred_work, ++ rpisense_fb_defio.delay); ++ break; ++ default: ++ return -EINVAL; ++ } ++ return 0; ++} ++ ++static struct fb_ops rpisense_fb_ops = { ++ .owner = THIS_MODULE, ++ .fb_read = fb_sys_read, ++ .fb_write = rpisense_fb_write, ++ .fb_fillrect = rpisense_fb_fillrect, ++ .fb_copyarea = rpisense_fb_copyarea, ++ .fb_imageblit = rpisense_fb_imageblit, ++ .fb_ioctl = rpisense_fb_ioctl, ++}; ++ ++static int rpisense_fb_probe(struct platform_device *pdev) ++{ ++ struct fb_info *info; ++ int ret = -ENOMEM; ++ struct rpisense_fb *rpisense_fb; ++ ++ rpisense = rpisense_get_dev(); ++ rpisense_fb = &rpisense->framebuffer; ++ ++ rpisense_fb_param.vmem = vzalloc(rpisense_fb_param.vmemsize); ++ if (!rpisense_fb_param.vmem) ++ return ret; ++ ++ rpisense_fb_param.vmem_work = devm_kmalloc(&pdev->dev, 193, GFP_KERNEL); ++ if (!rpisense_fb_param.vmem_work) ++ goto err_malloc; ++ ++ info = framebuffer_alloc(0, &pdev->dev); ++ if (!info) { ++ dev_err(&pdev->dev, "Could not allocate framebuffer.\n"); ++ goto err_malloc; ++ } ++ rpisense_fb->info = info; ++ ++ rpisense_fb_fix.smem_start = (unsigned long)rpisense_fb_param.vmem; ++ rpisense_fb_fix.smem_len = rpisense_fb_param.vmemsize; ++ ++ info->fbops = &rpisense_fb_ops; ++ info->fix = rpisense_fb_fix; ++ info->var = rpisense_fb_var; ++ info->fbdefio = &rpisense_fb_defio; ++ info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB; ++ info->screen_base = rpisense_fb_param.vmem; ++ info->screen_size = rpisense_fb_param.vmemsize; ++ ++ if (lowlight) ++ rpisense_fb_param.gamma = gamma_low; ++ ++ fb_deferred_io_init(info); ++ ++ ret = register_framebuffer(info); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "Could not register framebuffer.\n"); ++ goto err_fballoc; ++ } ++ ++ fb_info(info, "%s frame buffer device\n", info->fix.id); ++ schedule_delayed_work(&info->deferred_work, rpisense_fb_defio.delay); ++ return 0; ++err_fballoc: ++ framebuffer_release(info); ++err_malloc: ++ vfree(rpisense_fb_param.vmem); ++ return ret; ++} ++ ++static int rpisense_fb_remove(struct platform_device *pdev) ++{ ++ struct rpisense_fb *rpisense_fb = &rpisense->framebuffer; ++ struct fb_info *info = rpisense_fb->info; ++ ++ if (info) { ++ unregister_framebuffer(info); ++ fb_deferred_io_cleanup(info); ++ framebuffer_release(info); ++ vfree(rpisense_fb_param.vmem); ++ } ++ ++ return 0; ++} ++ ++#ifdef CONFIG_OF ++static const struct of_device_id rpisense_fb_id[] = { ++ { .compatible = "rpi,rpi-sense-fb" }, ++ { }, ++}; ++MODULE_DEVICE_TABLE(of, rpisense_fb_id); ++#endif ++ ++static struct platform_device_id rpisense_fb_device_id[] = { ++ { .name = "rpi-sense-fb" }, ++ { }, ++}; ++MODULE_DEVICE_TABLE(platform, rpisense_fb_device_id); ++ ++static struct platform_driver rpisense_fb_driver = { ++ .probe = rpisense_fb_probe, ++ .remove = rpisense_fb_remove, ++ .driver = { ++ .name = "rpi-sense-fb", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++module_platform_driver(rpisense_fb_driver); ++ ++MODULE_DESCRIPTION("Raspberry Pi Sense HAT framebuffer driver"); ++MODULE_AUTHOR("Serge Schneider "); ++MODULE_LICENSE("GPL"); ++ +--- /dev/null ++++ b/include/linux/mfd/rpisense/core.h +@@ -0,0 +1,47 @@ ++/* ++ * Raspberry Pi Sense HAT core driver ++ * http://raspberrypi.org ++ * ++ * Copyright (C) 2015 Raspberry Pi ++ * ++ * Author: Serge Schneider ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++ ++#ifndef __LINUX_MFD_RPISENSE_CORE_H_ ++#define __LINUX_MFD_RPISENSE_CORE_H_ ++ ++#include ++#include ++ ++/* ++ * Register values. ++ */ ++#define RPISENSE_FB 0x00 ++#define RPISENSE_WAI 0xF0 ++#define RPISENSE_VER 0xF1 ++#define RPISENSE_KEYS 0xF2 ++#define RPISENSE_EE_WP 0xF3 ++ ++#define RPISENSE_ID 's' ++ ++struct rpisense { ++ struct device *dev; ++ struct i2c_client *i2c_client; ++ ++ /* Client devices */ ++ struct rpisense_js joystick; ++ struct rpisense_fb framebuffer; ++}; ++ ++struct rpisense *rpisense_get_dev(void); ++s32 rpisense_reg_read(struct rpisense *rpisense, int reg); ++int rpisense_reg_write(struct rpisense *rpisense, int reg, u16 val); ++int rpisense_block_write(struct rpisense *rpisense, const char *buf, int count); ++ ++#endif +--- /dev/null ++++ b/include/linux/mfd/rpisense/framebuffer.h +@@ -0,0 +1,32 @@ ++/* ++ * Raspberry Pi Sense HAT framebuffer driver ++ * http://raspberrypi.org ++ * ++ * Copyright (C) 2015 Raspberry Pi ++ * ++ * Author: Serge Schneider ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++ ++#ifndef __LINUX_RPISENSE_FB_H_ ++#define __LINUX_RPISENSE_FB_H_ ++ ++#define SENSEFB_FBIO_IOC_MAGIC 0xF1 ++ ++#define SENSEFB_FBIOGET_GAMMA _IO(SENSEFB_FBIO_IOC_MAGIC, 0) ++#define SENSEFB_FBIOSET_GAMMA _IO(SENSEFB_FBIO_IOC_MAGIC, 1) ++#define SENSEFB_FBIORESET_GAMMA _IO(SENSEFB_FBIO_IOC_MAGIC, 2) ++ ++struct rpisense; ++ ++struct rpisense_fb { ++ struct platform_device *pdev; ++ struct fb_info *info; ++}; ++ ++#endif +--- /dev/null ++++ b/include/linux/mfd/rpisense/joystick.h +@@ -0,0 +1,35 @@ ++/* ++ * Raspberry Pi Sense HAT joystick driver ++ * http://raspberrypi.org ++ * ++ * Copyright (C) 2015 Raspberry Pi ++ * ++ * Author: Serge Schneider ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++ ++#ifndef __LINUX_RPISENSE_JOYSTICK_H_ ++#define __LINUX_RPISENSE_JOYSTICK_H_ ++ ++#include ++#include ++#include ++#include ++ ++struct rpisense; ++ ++struct rpisense_js { ++ struct platform_device *pdev; ++ struct input_dev *keys_dev; ++ struct gpio_desc *keys_desc; ++ struct work_struct keys_work_s; ++ int keys_irq; ++}; ++ ++ ++#endif diff --git a/target/linux/brcm2708/patches-4.9/950-0066-ASoC-Add-support-for-HifiBerry-DAC.patch b/target/linux/brcm2708/patches-4.9/950-0066-ASoC-Add-support-for-HifiBerry-DAC.patch new file mode 100644 index 000000000000..107ed28c1b06 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0066-ASoC-Add-support-for-HifiBerry-DAC.patch @@ -0,0 +1,170 @@ +From fe9fdf49ba81e28860e5367ea8bb9c6b1c6a0460 Mon Sep 17 00:00:00 2001 +From: Florian Meier +Date: Fri, 22 Nov 2013 19:19:08 +0100 +Subject: [PATCH] ASoC: Add support for HifiBerry DAC + +This adds a machine driver for the HifiBerry DAC. +It is a sound card that can +be stacked onto the Raspberry Pi. + +Signed-off-by: Florian Meier +--- + sound/soc/bcm/Kconfig | 9 ++- + sound/soc/bcm/Makefile | 4 ++ + sound/soc/bcm/hifiberry_dac.c | 124 ++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 136 insertions(+), 1 deletion(-) + create mode 100644 sound/soc/bcm/hifiberry_dac.c + +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -15,4 +15,11 @@ config SND_SOC_CYGNUS + Say Y if you want to add support for ASoC audio on Broadcom + Cygnus chips (bcm958300, bcm958305, bcm911360) + +- If you don't know what to do here, say N. +\ No newline at end of file ++ If you don't know what to do here, say N. ++ ++config SND_BCM2708_SOC_HIFIBERRY_DAC ++ tristate "Support for HifiBerry DAC" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM5102A ++ help ++ Say Y or M if you want to add support for HifiBerry DAC. +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -8,3 +8,7 @@ snd-soc-cygnus-objs := cygnus-pcm.o cygn + + obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o + ++# BCM2708 Machine Support ++snd-soc-hifiberry-dac-objs := hifiberry_dac.o ++ ++obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o +--- /dev/null ++++ b/sound/soc/bcm/hifiberry_dac.c +@@ -0,0 +1,124 @@ ++/* ++ * ASoC Driver for HifiBerry DAC ++ * ++ * Author: Florian Meier ++ * Copyright 2013 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++static int snd_rpi_hifiberry_dac_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ return 0; ++} ++ ++static int snd_rpi_hifiberry_dac_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ unsigned int sample_bits = ++ snd_pcm_format_physical_width(params_format(params)); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_hifiberry_dac_ops = { ++ .hw_params = snd_rpi_hifiberry_dac_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_hifiberry_dac_dai[] = { ++{ ++ .name = "HifiBerry DAC", ++ .stream_name = "HifiBerry DAC HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm5102a-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm5102a-codec", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_hifiberry_dac_ops, ++ .init = snd_rpi_hifiberry_dac_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_hifiberry_dac = { ++ .name = "snd_rpi_hifiberry_dac", ++ .driver_name = "HifiberryDac", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_hifiberry_dac_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_dac_dai), ++}; ++ ++static int snd_rpi_hifiberry_dac_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_hifiberry_dac.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_hifiberry_dac_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_hifiberry_dac); ++ if (ret) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_hifiberry_dac_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_hifiberry_dac); ++} ++ ++static const struct of_device_id snd_rpi_hifiberry_dac_of_match[] = { ++ { .compatible = "hifiberry,hifiberry-dac", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_dac_of_match); ++ ++static struct platform_driver snd_rpi_hifiberry_dac_driver = { ++ .driver = { ++ .name = "snd-hifiberry-dac", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_hifiberry_dac_of_match, ++ }, ++ .probe = snd_rpi_hifiberry_dac_probe, ++ .remove = snd_rpi_hifiberry_dac_remove, ++}; ++ ++module_platform_driver(snd_rpi_hifiberry_dac_driver); ++ ++MODULE_AUTHOR("Florian Meier "); ++MODULE_DESCRIPTION("ASoC Driver for HifiBerry DAC"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/950-0067-ASoC-Add-support-for-Rpi-DAC.patch b/target/linux/brcm2708/patches-4.9/950-0067-ASoC-Add-support-for-Rpi-DAC.patch new file mode 100644 index 000000000000..26ae5b3d769d --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0067-ASoC-Add-support-for-Rpi-DAC.patch @@ -0,0 +1,272 @@ +From 3a890b43d08fbfe10895f733578f095a6449ba0b Mon Sep 17 00:00:00 2001 +From: Florian Meier +Date: Mon, 25 Jan 2016 15:48:59 +0000 +Subject: [PATCH] ASoC: Add support for Rpi-DAC + +--- + sound/soc/bcm/Kconfig | 7 +++ + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/rpi-dac.c | 119 ++++++++++++++++++++++++++++++++++++++++++++ + sound/soc/codecs/Kconfig | 5 ++ + sound/soc/codecs/Makefile | 2 + + sound/soc/codecs/pcm1794a.c | 69 +++++++++++++++++++++++++ + 6 files changed, 204 insertions(+) + create mode 100644 sound/soc/bcm/rpi-dac.c + create mode 100644 sound/soc/codecs/pcm1794a.c + +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -23,3 +23,10 @@ config SND_BCM2708_SOC_HIFIBERRY_DAC + select SND_SOC_PCM5102A + help + Say Y or M if you want to add support for HifiBerry DAC. ++ ++config SND_BCM2708_SOC_RPI_DAC ++ tristate "Support for RPi-DAC" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM1794A ++ help ++ Say Y or M if you want to add support for RPi-DAC. +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -10,5 +10,7 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc- + + # BCM2708 Machine Support + snd-soc-hifiberry-dac-objs := hifiberry_dac.o ++snd-soc-rpi-dac-objs := rpi-dac.o + + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o ++obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o +--- /dev/null ++++ b/sound/soc/bcm/rpi-dac.c +@@ -0,0 +1,119 @@ ++/* ++ * ASoC Driver for RPi-DAC. ++ * ++ * Author: Florian Meier ++ * Copyright 2013 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++static int snd_rpi_rpi_dac_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ return 0; ++} ++ ++static int snd_rpi_rpi_dac_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 32*2); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_rpi_dac_ops = { ++ .hw_params = snd_rpi_rpi_dac_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_rpi_dac_dai[] = { ++{ ++ .name = "RPi-DAC", ++ .stream_name = "RPi-DAC HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm1794a-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm1794a-codec", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_rpi_dac_ops, ++ .init = snd_rpi_rpi_dac_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_rpi_dac = { ++ .name = "snd_rpi_rpi_dac", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_rpi_dac_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_rpi_dac_dai), ++}; ++ ++static int snd_rpi_rpi_dac_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_rpi_dac.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_rpi_dac_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_rpi_dac); ++ if (ret) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_rpi_dac_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_rpi_dac); ++} ++ ++static const struct of_device_id snd_rpi_rpi_dac_of_match[] = { ++ { .compatible = "rpi,rpi-dac", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_rpi_dac_of_match); ++ ++static struct platform_driver snd_rpi_rpi_dac_driver = { ++ .driver = { ++ .name = "snd-rpi-dac", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_rpi_dac_of_match, ++ }, ++ .probe = snd_rpi_rpi_dac_probe, ++ .remove = snd_rpi_rpi_dac_remove, ++}; ++ ++module_platform_driver(snd_rpi_rpi_dac_driver); ++ ++MODULE_AUTHOR("Florian Meier "); ++MODULE_DESCRIPTION("ASoC Driver for RPi-DAC"); ++MODULE_LICENSE("GPL v2"); +--- a/sound/soc/codecs/Kconfig ++++ b/sound/soc/codecs/Kconfig +@@ -98,6 +98,7 @@ config SND_SOC_ALL_CODECS + select SND_SOC_PCM1681 if I2C + select SND_SOC_PCM179X_I2C if I2C + select SND_SOC_PCM179X_SPI if SPI_MASTER ++ select SND_SOC_PCM1794A if I2C + select SND_SOC_PCM3008 + select SND_SOC_PCM3168A_I2C if I2C + select SND_SOC_PCM3168A_SPI if SPI_MASTER +@@ -689,6 +690,10 @@ config SND_SOC_RT5616 + tristate "Realtek RT5616 CODEC" + depends on I2C + ++config SND_SOC_PCM1794A ++ tristate ++ depends on I2C ++ + config SND_SOC_RT5631 + tristate "Realtek ALC5631/RT5631 CODEC" + depends on I2C +--- a/sound/soc/codecs/Makefile ++++ b/sound/soc/codecs/Makefile +@@ -93,6 +93,7 @@ snd-soc-pcm1681-objs := pcm1681.o + snd-soc-pcm179x-codec-objs := pcm179x.o + snd-soc-pcm179x-i2c-objs := pcm179x-i2c.o + snd-soc-pcm179x-spi-objs := pcm179x-spi.o ++snd-soc-pcm1794a-objs := pcm1794a.o + snd-soc-pcm3008-objs := pcm3008.o + snd-soc-pcm3168a-objs := pcm3168a.o + snd-soc-pcm3168a-i2c-objs := pcm3168a-i2c.o +@@ -325,6 +326,7 @@ obj-$(CONFIG_SND_SOC_PCM5102A) += snd-so + obj-$(CONFIG_SND_SOC_PCM512x) += snd-soc-pcm512x.o + obj-$(CONFIG_SND_SOC_PCM512x_I2C) += snd-soc-pcm512x-i2c.o + obj-$(CONFIG_SND_SOC_PCM512x_SPI) += snd-soc-pcm512x-spi.o ++obj-$(CONFIG_SND_SOC_PCM1794A) += snd-soc-pcm1794a.o + obj-$(CONFIG_SND_SOC_RL6231) += snd-soc-rl6231.o + obj-$(CONFIG_SND_SOC_RL6347A) += snd-soc-rl6347a.o + obj-$(CONFIG_SND_SOC_RT286) += snd-soc-rt286.o +--- /dev/null ++++ b/sound/soc/codecs/pcm1794a.c +@@ -0,0 +1,69 @@ ++/* ++ * Driver for the PCM1794A codec ++ * ++ * Author: Florian Meier ++ * Copyright 2013 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++ ++#include ++#include ++#include ++ ++#include ++ ++static struct snd_soc_dai_driver pcm1794a_dai = { ++ .name = "pcm1794a-hifi", ++ .playback = { ++ .channels_min = 2, ++ .channels_max = 2, ++ .rates = SNDRV_PCM_RATE_8000_192000, ++ .formats = SNDRV_PCM_FMTBIT_S16_LE | ++ SNDRV_PCM_FMTBIT_S24_LE ++ }, ++}; ++ ++static struct snd_soc_codec_driver soc_codec_dev_pcm1794a; ++ ++static int pcm1794a_probe(struct platform_device *pdev) ++{ ++ return snd_soc_register_codec(&pdev->dev, &soc_codec_dev_pcm1794a, ++ &pcm1794a_dai, 1); ++} ++ ++static int pcm1794a_remove(struct platform_device *pdev) ++{ ++ snd_soc_unregister_codec(&pdev->dev); ++ return 0; ++} ++ ++static const struct of_device_id pcm1794a_of_match[] = { ++ { .compatible = "ti,pcm1794a", }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, pcm1794a_of_match); ++ ++static struct platform_driver pcm1794a_codec_driver = { ++ .probe = pcm1794a_probe, ++ .remove = pcm1794a_remove, ++ .driver = { ++ .name = "pcm1794a-codec", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(pcm1794a_of_match), ++ }, ++}; ++ ++module_platform_driver(pcm1794a_codec_driver); ++ ++MODULE_DESCRIPTION("ASoC PCM1794A codec driver"); ++MODULE_AUTHOR("Florian Meier "); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/950-0068-ASoC-wm8804-Implement-MCLK-configuration-options-add.patch b/target/linux/brcm2708/patches-4.9/950-0068-ASoC-wm8804-Implement-MCLK-configuration-options-add.patch new file mode 100644 index 000000000000..1be734befa1e --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0068-ASoC-wm8804-Implement-MCLK-configuration-options-add.patch @@ -0,0 +1,49 @@ +From 8432dc7c8a843e7c35d7624adc6653e13dd488a7 Mon Sep 17 00:00:00 2001 +From: Daniel Matuschek +Date: Wed, 15 Jan 2014 21:41:23 +0100 +Subject: [PATCH] ASoC: wm8804: Implement MCLK configuration options, add 32bit + support WM8804 can run with PLL frequencies of 256xfs and 128xfs for most + sample rates. At 192kHz only 128xfs is supported. The existing driver selects + 128xfs automatically for some lower samples rates. By using an additional + mclk_div divider, it is now possible to control the behaviour. This allows + using 256xfs PLL frequency on all sample rates up to 96kHz. It should allow + lower jitter and better signal quality. The behavior has to be controlled by + the sound card driver, because some sample frequency share the same setting. + e.g. 192kHz and 96kHz use 24.576MHz master clock. The only difference is the + MCLK divider. + +This also added support for 32bit data. + +Signed-off-by: Daniel Matuschek +--- + sound/soc/codecs/wm8804.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/sound/soc/codecs/wm8804.c ++++ b/sound/soc/codecs/wm8804.c +@@ -304,6 +304,7 @@ static int wm8804_hw_params(struct snd_p + blen = 0x1; + break; + case 24: ++ case 32: + blen = 0x2; + break; + default: +@@ -515,7 +516,7 @@ static const struct snd_soc_dai_ops wm88 + }; + + #define WM8804_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ +- SNDRV_PCM_FMTBIT_S24_LE) ++ SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) + + #define WM8804_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \ +@@ -543,7 +544,7 @@ static struct snd_soc_dai_driver wm8804_ + }; + + static const struct snd_soc_codec_driver soc_codec_dev_wm8804 = { +- .idle_bias_off = true, ++ .idle_bias_off = false, + + .component_driver = { + .dapm_widgets = wm8804_dapm_widgets, diff --git a/target/linux/brcm2708/patches-4.9/950-0069-ASoC-BCM-Add-support-for-HiFiBerry-Digi.-Driver-is-b.patch b/target/linux/brcm2708/patches-4.9/950-0069-ASoC-BCM-Add-support-for-HiFiBerry-Digi.-Driver-is-b.patch new file mode 100644 index 000000000000..5f8477cd7bc9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0069-ASoC-BCM-Add-support-for-HiFiBerry-Digi.-Driver-is-b.patch @@ -0,0 +1,339 @@ +From ded3c4c0c46af840159e4fc79a065d69cbb7b534 Mon Sep 17 00:00:00 2001 +From: Daniel Matuschek +Date: Wed, 15 Jan 2014 21:42:08 +0100 +Subject: [PATCH] ASoC: BCM:Add support for HiFiBerry Digi. Driver is based on + the patched WM8804 driver. + +Signed-off-by: Daniel Matuschek + +Add a parameter to turn off SPDIF output if no audio is playing + +This patch adds the paramater auto_shutdown_output to the kernel module. +Default behaviour of the module is the same, but when auto_shutdown_output +is set to 1, the SPDIF oputput will shutdown if no stream is playing. + +bugfix for 32kHz sample rate, was missing + +HiFiBerry Digi: set SPDIF status bits for sample rate + +The HiFiBerry Digi driver did not signal the sample rate in the SPDIF status bits. +While this is optional, some DACs and receivers do not accept this signal. This patch +adds the sample rate bits in the SPDIF status block. + +Added HiFiBerry Digi+ Pro driver + +Signed-off-by: Daniel Matuschek +--- + sound/soc/bcm/Kconfig | 7 ++ + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/hifiberry_digi.c | 276 +++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 285 insertions(+) + create mode 100644 sound/soc/bcm/hifiberry_digi.c + +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -24,6 +24,13 @@ config SND_BCM2708_SOC_HIFIBERRY_DAC + help + Say Y or M if you want to add support for HifiBerry DAC. + ++config SND_BCM2708_SOC_HIFIBERRY_DIGI ++ tristate "Support for HifiBerry Digi" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_WM8804 ++ help ++ Say Y or M if you want to add support for HifiBerry Digi S/PDIF output board. ++ + config SND_BCM2708_SOC_RPI_DAC + tristate "Support for RPi-DAC" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -10,7 +10,9 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc- + + # BCM2708 Machine Support + snd-soc-hifiberry-dac-objs := hifiberry_dac.o ++snd-soc-hifiberry-digi-objs := hifiberry_digi.o + snd-soc-rpi-dac-objs := rpi-dac.o + + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o ++obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o +--- /dev/null ++++ b/sound/soc/bcm/hifiberry_digi.c +@@ -0,0 +1,276 @@ ++/* ++ * ASoC Driver for HifiBerry Digi ++ * ++ * Author: Daniel Matuschek ++ * based on the HifiBerry DAC driver by Florian Meier ++ * Copyright 2013 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/wm8804.h" ++ ++static short int auto_shutdown_output = 0; ++module_param(auto_shutdown_output, short, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP); ++MODULE_PARM_DESC(auto_shutdown_output, "Shutdown SP/DIF output if playback is stopped"); ++ ++#define CLK_44EN_RATE 22579200UL ++#define CLK_48EN_RATE 24576000UL ++ ++static bool snd_rpi_hifiberry_is_digipro; ++static struct gpio_desc *snd_rpi_hifiberry_clk44gpio; ++static struct gpio_desc *snd_rpi_hifiberry_clk48gpio; ++ ++static int samplerate=44100; ++ ++static uint32_t snd_rpi_hifiberry_digi_enable_clock(int sample_rate) ++{ ++ switch (sample_rate) { ++ case 11025: ++ case 22050: ++ case 44100: ++ case 88200: ++ case 176400: ++ gpiod_set_value_cansleep(snd_rpi_hifiberry_clk44gpio, 1); ++ gpiod_set_value_cansleep(snd_rpi_hifiberry_clk48gpio, 0); ++ return CLK_44EN_RATE; ++ default: ++ gpiod_set_value_cansleep(snd_rpi_hifiberry_clk48gpio, 1); ++ gpiod_set_value_cansleep(snd_rpi_hifiberry_clk44gpio, 0); ++ return CLK_48EN_RATE; ++ } ++} ++ ++ ++static int snd_rpi_hifiberry_digi_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ /* enable TX output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); ++ ++ /* Initialize Digi+ Pro hardware */ ++ if (snd_rpi_hifiberry_is_digipro) { ++ struct snd_soc_dai_link *dai = rtd->dai_link; ++ ++ dai->name = "HiFiBerry Digi+ Pro"; ++ dai->stream_name = "HiFiBerry Digi+ Pro HiFi"; ++ } ++ ++ return 0; ++} ++ ++static int snd_rpi_hifiberry_digi_startup(struct snd_pcm_substream *substream) { ++ /* turn on digital output */ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x00); ++ return 0; ++} ++ ++static void snd_rpi_hifiberry_digi_shutdown(struct snd_pcm_substream *substream) { ++ /* turn off output */ ++ if (auto_shutdown_output) { ++ /* turn off output */ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x3c); ++ } ++} ++ ++ ++static int snd_rpi_hifiberry_digi_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ struct snd_soc_codec *codec = rtd->codec; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ int sysclk = 27000000; /* This is fixed on this board */ ++ ++ long mclk_freq=0; ++ int mclk_div=1; ++ int sampling_freq=1; ++ ++ int ret; ++ ++ samplerate = params_rate(params); ++ ++ if (samplerate<=96000) { ++ mclk_freq=samplerate*256; ++ mclk_div=WM8804_MCLKDIV_256FS; ++ } else { ++ mclk_freq=samplerate*128; ++ mclk_div=WM8804_MCLKDIV_128FS; ++ } ++ ++ if (snd_rpi_hifiberry_is_digipro) ++ sysclk = snd_rpi_hifiberry_digi_enable_clock(samplerate); ++ ++ switch (samplerate) { ++ case 32000: ++ sampling_freq=0x03; ++ break; ++ case 44100: ++ sampling_freq=0x00; ++ break; ++ case 48000: ++ sampling_freq=0x02; ++ break; ++ case 88200: ++ sampling_freq=0x08; ++ break; ++ case 96000: ++ sampling_freq=0x0a; ++ break; ++ case 176400: ++ sampling_freq=0x0c; ++ break; ++ case 192000: ++ sampling_freq=0x0e; ++ break; ++ default: ++ dev_err(codec->dev, ++ "Failed to set WM8804 SYSCLK, unsupported samplerate %d\n", ++ samplerate); ++ } ++ ++ snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div); ++ snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq); ++ ++ ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL, ++ sysclk, SND_SOC_CLOCK_OUT); ++ ++ if (ret < 0) { ++ dev_err(codec->dev, ++ "Failed to set WM8804 SYSCLK: %d\n", ret); ++ return ret; ++ } ++ ++ /* Enable TX output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); ++ ++ /* Power on */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x9, 0); ++ ++ /* set sampling frequency status bits */ ++ snd_soc_update_bits(codec, WM8804_SPDTX4, 0x0f, sampling_freq); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai,64); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_hifiberry_digi_ops = { ++ .hw_params = snd_rpi_hifiberry_digi_hw_params, ++ .startup = snd_rpi_hifiberry_digi_startup, ++ .shutdown = snd_rpi_hifiberry_digi_shutdown, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_hifiberry_digi_dai[] = { ++{ ++ .name = "HifiBerry Digi", ++ .stream_name = "HifiBerry Digi HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "wm8804-spdif", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "wm8804.1-003b", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM, ++ .ops = &snd_rpi_hifiberry_digi_ops, ++ .init = snd_rpi_hifiberry_digi_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_hifiberry_digi = { ++ .name = "snd_rpi_hifiberry_digi", ++ .driver_name = "HifiberryDigi", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_hifiberry_digi_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_digi_dai), ++}; ++ ++static int snd_rpi_hifiberry_digi_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_hifiberry_digi.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_hifiberry_digi_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ ++ snd_rpi_hifiberry_is_digipro = 1; ++ ++ snd_rpi_hifiberry_clk44gpio = ++ devm_gpiod_get(&pdev->dev, "clock44", GPIOD_OUT_LOW); ++ if (IS_ERR(snd_rpi_hifiberry_clk44gpio)) ++ snd_rpi_hifiberry_is_digipro = 0; ++ ++ snd_rpi_hifiberry_clk48gpio = ++ devm_gpiod_get(&pdev->dev, "clock48", GPIOD_OUT_LOW); ++ if (IS_ERR(snd_rpi_hifiberry_clk48gpio)) ++ snd_rpi_hifiberry_is_digipro = 0; ++ ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_hifiberry_digi); ++ if (ret) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_hifiberry_digi_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_hifiberry_digi); ++} ++ ++static const struct of_device_id snd_rpi_hifiberry_digi_of_match[] = { ++ { .compatible = "hifiberry,hifiberry-digi", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_digi_of_match); ++ ++static struct platform_driver snd_rpi_hifiberry_digi_driver = { ++ .driver = { ++ .name = "snd-hifiberry-digi", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_hifiberry_digi_of_match, ++ }, ++ .probe = snd_rpi_hifiberry_digi_probe, ++ .remove = snd_rpi_hifiberry_digi_remove, ++}; ++ ++module_platform_driver(snd_rpi_hifiberry_digi_driver); ++ ++MODULE_AUTHOR("Daniel Matuschek "); ++MODULE_DESCRIPTION("ASoC Driver for HifiBerry Digi"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/950-0070-Add-IQaudIO-Sound-Card-support-for-Raspberry-Pi.patch b/target/linux/brcm2708/patches-4.9/950-0070-Add-IQaudIO-Sound-Card-support-for-Raspberry-Pi.patch new file mode 100644 index 000000000000..08bf856c9f42 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0070-Add-IQaudIO-Sound-Card-support-for-Raspberry-Pi.patch @@ -0,0 +1,325 @@ +From fcfe9087b79176b5d8afd0ecc4c66013866ef239 Mon Sep 17 00:00:00 2001 +From: Gordon Garrity +Date: Sat, 8 Mar 2014 16:56:57 +0000 +Subject: [PATCH] Add IQaudIO Sound Card support for Raspberry Pi + +Set a limit of 0dB on Digital Volume Control + +The main volume control in the PCM512x DAC has a range up to ++24dB. This is dangerously loud and can potentially cause massive +clipping in the output stages. Therefore this sets a sensible +limit of 0dB for this control. + +Allow up to 24dB digital gain to be applied when using IQAudIO DAC+ + +24db_digital_gain DT param can be used to specify that PCM512x +codec "Digital" volume control should not be limited to 0dB gain, +and if specified will allow the full 24dB gain. + +Modify IQAudIO DAC+ ASoC driver to set card/dai config from dt + +Add the ability to set the card name, dai name and dai stream name, from +dt config. + +Signed-off-by: DigitalDreamtime + +IQaudIO: auto-mute for AMP+ and DigiAMP+ + +IQAudIO amplifier mute via GPIO22. Add dt params for "one-shot" unmute +and auto mute. + +Revision 2, auto mute implementing HiassofT suggestion to mute/unmute +using set_bias_level, rather than startup/shutdown.... +"By default DAPM waits 5 seconds (pmdown_time) before shutting down +playback streams so a close/stop immediately followed by open/start +doesn't trigger an amp mute+unmute." + +Tested on both AMP+ (via DAC+) and DigiAMP+, with both options... + +dtoverlay=iqaudio-dacplus,unmute_amp + "one-shot" unmute when kernel module loads. + +dtoverlay=iqaudio-dacplus,auto_mute_amp + Unmute amp when ALSA device opened by a client. Mute, with 5 second delay + when ALSA device closed. (Re-opening the device within the 5 second close + window, will cancel mute.) + +Revision 4, using gpiod. + +Revision 5, clean-up formatting before adding mute code. + - Convert tab plus 4 space formatting to 2x tab + - Remove '// NOT USED' commented code + +Revision 6, don't attempt to "one-shot" unmute amp, unless card is +successfully registered. + +Signed-off-by: DigitalDreamtime +--- + sound/soc/bcm/Kconfig | 7 ++ + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/iqaudio-dac.c | 234 ++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 243 insertions(+) + create mode 100644 sound/soc/bcm/iqaudio-dac.c + +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -37,3 +37,10 @@ config SND_BCM2708_SOC_RPI_DAC + select SND_SOC_PCM1794A + help + Say Y or M if you want to add support for RPi-DAC. ++ ++config SND_BCM2708_SOC_IQAUDIO_DAC ++ tristate "Support for IQaudIO-DAC" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM512x_I2C ++ help ++ Say Y or M if you want to add support for IQaudIO-DAC. +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -12,7 +12,9 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc- + snd-soc-hifiberry-dac-objs := hifiberry_dac.o + snd-soc-hifiberry-digi-objs := hifiberry_digi.o + snd-soc-rpi-dac-objs := rpi-dac.o ++snd-soc-iqaudio-dac-objs := iqaudio-dac.o + + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o ++obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o +--- /dev/null ++++ b/sound/soc/bcm/iqaudio-dac.c +@@ -0,0 +1,234 @@ ++/* ++ * ASoC Driver for IQaudIO DAC ++ * ++ * Author: Florian Meier ++ * Copyright 2013 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++static bool digital_gain_0db_limit = true; ++ ++static struct gpio_desc *mute_gpio; ++ ++static int snd_rpi_iqaudio_dac_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ if (digital_gain_0db_limit) ++ { ++ int ret; ++ struct snd_soc_card *card = rtd->card; ++ ++ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); ++ } ++ ++ return 0; ++} ++ ++static int snd_rpi_iqaudio_dac_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ unsigned int sample_bits = ++ snd_pcm_format_physical_width(params_format(params)); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); ++} ++ ++static void snd_rpi_iqaudio_gpio_mute(struct snd_soc_card *card) ++{ ++ if (mute_gpio) { ++ dev_info(card->dev, "%s: muting amp using GPIO22\n", ++ __func__); ++ gpiod_set_value_cansleep(mute_gpio, 0); ++ } ++} ++ ++static void snd_rpi_iqaudio_gpio_unmute(struct snd_soc_card *card) ++{ ++ if (mute_gpio) { ++ dev_info(card->dev, "%s: un-muting amp using GPIO22\n", ++ __func__); ++ gpiod_set_value_cansleep(mute_gpio, 1); ++ } ++} ++ ++static int snd_rpi_iqaudio_set_bias_level(struct snd_soc_card *card, ++ struct snd_soc_dapm_context *dapm, enum snd_soc_bias_level level) ++{ ++ struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai; ++ ++ if (dapm->dev != codec_dai->dev) ++ return 0; ++ ++ switch (level) { ++ case SND_SOC_BIAS_PREPARE: ++ if (dapm->bias_level != SND_SOC_BIAS_STANDBY) ++ break; ++ ++ /* UNMUTE AMP */ ++ snd_rpi_iqaudio_gpio_unmute(card); ++ ++ break; ++ case SND_SOC_BIAS_STANDBY: ++ if (dapm->bias_level != SND_SOC_BIAS_PREPARE) ++ break; ++ ++ /* MUTE AMP */ ++ snd_rpi_iqaudio_gpio_mute(card); ++ ++ break; ++ default: ++ break; ++ } ++ ++ return 0; ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_iqaudio_dac_ops = { ++ .hw_params = snd_rpi_iqaudio_dac_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_iqaudio_dac_dai[] = { ++{ ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm512x-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm512x.1-004c", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_iqaudio_dac_ops, ++ .init = snd_rpi_iqaudio_dac_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_iqaudio_dac = { ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_iqaudio_dac_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_iqaudio_dac_dai), ++}; ++ ++static int snd_rpi_iqaudio_dac_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ bool gpio_unmute = false; ++ ++ snd_rpi_iqaudio_dac.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_card *card = &snd_rpi_iqaudio_dac; ++ struct snd_soc_dai_link *dai = &snd_rpi_iqaudio_dac_dai[0]; ++ bool auto_gpio_mute = false; ++ ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ ++ digital_gain_0db_limit = !of_property_read_bool( ++ pdev->dev.of_node, "iqaudio,24db_digital_gain"); ++ ++ if (of_property_read_string(pdev->dev.of_node, "card_name", ++ &card->name)) ++ card->name = "IQaudIODAC"; ++ ++ if (of_property_read_string(pdev->dev.of_node, "dai_name", ++ &dai->name)) ++ dai->name = "IQaudIO DAC"; ++ ++ if (of_property_read_string(pdev->dev.of_node, ++ "dai_stream_name", &dai->stream_name)) ++ dai->stream_name = "IQaudIO DAC HiFi"; ++ ++ /* gpio_unmute - one time unmute amp using GPIO */ ++ gpio_unmute = of_property_read_bool(pdev->dev.of_node, ++ "iqaudio-dac,unmute-amp"); ++ ++ /* auto_gpio_mute - mute/unmute amp using GPIO */ ++ auto_gpio_mute = of_property_read_bool(pdev->dev.of_node, ++ "iqaudio-dac,auto-mute-amp"); ++ ++ if (auto_gpio_mute || gpio_unmute) { ++ mute_gpio = devm_gpiod_get_optional(&pdev->dev, "mute", ++ GPIOD_OUT_LOW); ++ if (IS_ERR(mute_gpio)) { ++ ret = PTR_ERR(mute_gpio); ++ dev_err(&pdev->dev, ++ "Failed to get mute gpio: %d\n", ret); ++ return ret; ++ } ++ ++ if (auto_gpio_mute && mute_gpio) ++ snd_rpi_iqaudio_dac.set_bias_level = ++ snd_rpi_iqaudio_set_bias_level; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_iqaudio_dac); ++ if (ret) { ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ return ret; ++ } ++ ++ if (gpio_unmute && mute_gpio) ++ snd_rpi_iqaudio_gpio_unmute(&snd_rpi_iqaudio_dac); ++ ++ return 0; ++} ++ ++static int snd_rpi_iqaudio_dac_remove(struct platform_device *pdev) ++{ ++ snd_rpi_iqaudio_gpio_mute(&snd_rpi_iqaudio_dac); ++ ++ return snd_soc_unregister_card(&snd_rpi_iqaudio_dac); ++} ++ ++static const struct of_device_id iqaudio_of_match[] = { ++ { .compatible = "iqaudio,iqaudio-dac", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, iqaudio_of_match); ++ ++static struct platform_driver snd_rpi_iqaudio_dac_driver = { ++ .driver = { ++ .name = "snd-rpi-iqaudio-dac", ++ .owner = THIS_MODULE, ++ .of_match_table = iqaudio_of_match, ++ }, ++ .probe = snd_rpi_iqaudio_dac_probe, ++ .remove = snd_rpi_iqaudio_dac_remove, ++}; ++ ++module_platform_driver(snd_rpi_iqaudio_dac_driver); ++ ++MODULE_AUTHOR("Florian Meier "); ++MODULE_DESCRIPTION("ASoC Driver for IQAudio DAC"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/950-0071-iqaudio-dac-Compile-fix-untested.patch b/target/linux/brcm2708/patches-4.9/950-0071-iqaudio-dac-Compile-fix-untested.patch new file mode 100644 index 000000000000..edfb9f5e1fd5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0071-iqaudio-dac-Compile-fix-untested.patch @@ -0,0 +1,24 @@ +From 711f7413d72af6328a3958eecd400bd8911af211 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Mon, 25 Jul 2016 17:06:50 +0100 +Subject: [PATCH] iqaudio-dac: Compile fix - untested + +--- + sound/soc/bcm/iqaudio-dac.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +--- a/sound/soc/bcm/iqaudio-dac.c ++++ b/sound/soc/bcm/iqaudio-dac.c +@@ -76,7 +76,11 @@ static void snd_rpi_iqaudio_gpio_unmute( + static int snd_rpi_iqaudio_set_bias_level(struct snd_soc_card *card, + struct snd_soc_dapm_context *dapm, enum snd_soc_bias_level level) + { +- struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai; ++ struct snd_soc_pcm_runtime *rtd; ++ struct snd_soc_dai *codec_dai; ++ ++ rtd = snd_soc_get_pcm_runtime(card, card->dai_link[0].name); ++ codec_dai = rtd->codec_dai; + + if (dapm->dev != codec_dai->dev) + return 0; diff --git a/target/linux/brcm2708/patches-4.9/950-0072-Added-support-for-HiFiBerry-DAC.patch b/target/linux/brcm2708/patches-4.9/950-0072-Added-support-for-HiFiBerry-DAC.patch new file mode 100644 index 000000000000..21d30af475a8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0072-Added-support-for-HiFiBerry-DAC.patch @@ -0,0 +1,618 @@ +From 9c6b8bd0db7564a2124290e3bc30215906371fa9 Mon Sep 17 00:00:00 2001 +From: Daniel Matuschek +Date: Mon, 4 Aug 2014 10:06:56 +0200 +Subject: [PATCH] Added support for HiFiBerry DAC+ + +The driver is based on the HiFiBerry DAC driver. However HiFiBerry DAC+ uses +a different codec chip (PCM5122), therefore a new driver is necessary. + +Add support for the HiFiBerry DAC+ Pro. + +The HiFiBerry DAC+ and DAC+ Pro products both use the existing bcm sound driver with the DAC+ Pro having a special clock device driver representing the two high precision oscillators. + +An addition bug fix is included for the PCM512x codec where by the physical size of the sample frame is used in the calculation of the LRCK divisor as it was found to be wrong when using 24-bit depth sample contained in a little endian 4-byte sample frame. + +Limit PCM512x "Digital" gain to 0dB by default with HiFiBerry DAC+ + +24db_digital_gain DT param can be used to specify that PCM512x +codec "Digital" volume control should not be limited to 0dB gain, +and if specified will allow the full 24dB gain. + +Add dt param to force HiFiBerry DAC+ Pro into slave mode + +"dtoverlay=hifiberry-dacplus,slave" + +Add 'slave' param to use HiFiBerry DAC+ Pro in slave mode, +with Pi as master for bit and frame clock. + +Signed-off-by: DigitalDreamtime +--- + drivers/clk/Makefile | 1 + + drivers/clk/clk-hifiberry-dacpro.c | 160 +++++++++++++++++ + sound/soc/bcm/Kconfig | 7 + + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/hifiberry_dacplus.c | 359 +++++++++++++++++++++++++++++++++++++ + sound/soc/codecs/pcm512x.c | 3 +- + 6 files changed, 531 insertions(+), 1 deletion(-) + create mode 100644 drivers/clk/clk-hifiberry-dacpro.c + create mode 100644 sound/soc/bcm/hifiberry_dacplus.c + +--- a/drivers/clk/Makefile ++++ b/drivers/clk/Makefile +@@ -26,6 +26,7 @@ obj-$(CONFIG_ARCH_CLPS711X) += clk-clps + obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o + obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o + obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o ++obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += clk-hifiberry-dacpro.o + obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o + obj-$(CONFIG_ARCH_MB86S7X) += clk-mb86s7x.o + obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o +--- /dev/null ++++ b/drivers/clk/clk-hifiberry-dacpro.c +@@ -0,0 +1,160 @@ ++/* ++ * Clock Driver for HiFiBerry DAC Pro ++ * ++ * Author: Stuart MacLean ++ * Copyright 2015 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* Clock rate of CLK44EN attached to GPIO6 pin */ ++#define CLK_44EN_RATE 22579200UL ++/* Clock rate of CLK48EN attached to GPIO3 pin */ ++#define CLK_48EN_RATE 24576000UL ++ ++/** ++ * struct hifiberry_dacpro_clk - Common struct to the HiFiBerry DAC Pro ++ * @hw: clk_hw for the common clk framework ++ * @mode: 0 => CLK44EN, 1 => CLK48EN ++ */ ++struct clk_hifiberry_hw { ++ struct clk_hw hw; ++ uint8_t mode; ++}; ++ ++#define to_hifiberry_clk(_hw) container_of(_hw, struct clk_hifiberry_hw, hw) ++ ++static const struct of_device_id clk_hifiberry_dacpro_dt_ids[] = { ++ { .compatible = "hifiberry,dacpro-clk",}, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, clk_hifiberry_dacpro_dt_ids); ++ ++static unsigned long clk_hifiberry_dacpro_recalc_rate(struct clk_hw *hw, ++ unsigned long parent_rate) ++{ ++ return (to_hifiberry_clk(hw)->mode == 0) ? CLK_44EN_RATE : ++ CLK_48EN_RATE; ++} ++ ++static long clk_hifiberry_dacpro_round_rate(struct clk_hw *hw, ++ unsigned long rate, unsigned long *parent_rate) ++{ ++ long actual_rate; ++ ++ if (rate <= CLK_44EN_RATE) { ++ actual_rate = (long)CLK_44EN_RATE; ++ } else if (rate >= CLK_48EN_RATE) { ++ actual_rate = (long)CLK_48EN_RATE; ++ } else { ++ long diff44Rate = (long)(rate - CLK_44EN_RATE); ++ long diff48Rate = (long)(CLK_48EN_RATE - rate); ++ ++ if (diff44Rate < diff48Rate) ++ actual_rate = (long)CLK_44EN_RATE; ++ else ++ actual_rate = (long)CLK_48EN_RATE; ++ } ++ return actual_rate; ++} ++ ++ ++static int clk_hifiberry_dacpro_set_rate(struct clk_hw *hw, ++ unsigned long rate, unsigned long parent_rate) ++{ ++ unsigned long actual_rate; ++ struct clk_hifiberry_hw *clk = to_hifiberry_clk(hw); ++ ++ actual_rate = (unsigned long)clk_hifiberry_dacpro_round_rate(hw, rate, ++ &parent_rate); ++ clk->mode = (actual_rate == CLK_44EN_RATE) ? 0 : 1; ++ return 0; ++} ++ ++ ++const struct clk_ops clk_hifiberry_dacpro_rate_ops = { ++ .recalc_rate = clk_hifiberry_dacpro_recalc_rate, ++ .round_rate = clk_hifiberry_dacpro_round_rate, ++ .set_rate = clk_hifiberry_dacpro_set_rate, ++}; ++ ++static int clk_hifiberry_dacpro_probe(struct platform_device *pdev) ++{ ++ int ret; ++ struct clk_hifiberry_hw *proclk; ++ struct clk *clk; ++ struct device *dev; ++ struct clk_init_data init; ++ ++ dev = &pdev->dev; ++ ++ proclk = kzalloc(sizeof(struct clk_hifiberry_hw), GFP_KERNEL); ++ if (!proclk) ++ return -ENOMEM; ++ ++ init.name = "clk-hifiberry-dacpro"; ++ init.ops = &clk_hifiberry_dacpro_rate_ops; ++ init.flags = CLK_IS_BASIC; ++ init.parent_names = NULL; ++ init.num_parents = 0; ++ ++ proclk->mode = 0; ++ proclk->hw.init = &init; ++ ++ clk = devm_clk_register(dev, &proclk->hw); ++ if (!IS_ERR(clk)) { ++ ret = of_clk_add_provider(dev->of_node, of_clk_src_simple_get, ++ clk); ++ } else { ++ dev_err(dev, "Fail to register clock driver\n"); ++ kfree(proclk); ++ ret = PTR_ERR(clk); ++ } ++ return ret; ++} ++ ++static int clk_hifiberry_dacpro_remove(struct platform_device *pdev) ++{ ++ of_clk_del_provider(pdev->dev.of_node); ++ return 0; ++} ++ ++static struct platform_driver clk_hifiberry_dacpro_driver = { ++ .probe = clk_hifiberry_dacpro_probe, ++ .remove = clk_hifiberry_dacpro_remove, ++ .driver = { ++ .name = "clk-hifiberry-dacpro", ++ .of_match_table = clk_hifiberry_dacpro_dt_ids, ++ }, ++}; ++ ++static int __init clk_hifiberry_dacpro_init(void) ++{ ++ return platform_driver_register(&clk_hifiberry_dacpro_driver); ++} ++core_initcall(clk_hifiberry_dacpro_init); ++ ++static void __exit clk_hifiberry_dacpro_exit(void) ++{ ++ platform_driver_unregister(&clk_hifiberry_dacpro_driver); ++} ++module_exit(clk_hifiberry_dacpro_exit); ++ ++MODULE_DESCRIPTION("HiFiBerry DAC Pro clock driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:clk-hifiberry-dacpro"); +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -24,6 +24,13 @@ config SND_BCM2708_SOC_HIFIBERRY_DAC + help + Say Y or M if you want to add support for HifiBerry DAC. + ++config SND_BCM2708_SOC_HIFIBERRY_DACPLUS ++ tristate "Support for HifiBerry DAC+" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM512x ++ help ++ Say Y or M if you want to add support for HifiBerry DAC+. ++ + config SND_BCM2708_SOC_HIFIBERRY_DIGI + tristate "Support for HifiBerry Digi" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -10,11 +10,13 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc- + + # BCM2708 Machine Support + snd-soc-hifiberry-dac-objs := hifiberry_dac.o ++snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o + snd-soc-hifiberry-digi-objs := hifiberry_digi.o + snd-soc-rpi-dac-objs := rpi-dac.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o + + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o ++obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o +--- /dev/null ++++ b/sound/soc/bcm/hifiberry_dacplus.c +@@ -0,0 +1,359 @@ ++/* ++ * ASoC Driver for HiFiBerry DAC+ / DAC Pro ++ * ++ * Author: Daniel Matuschek, Stuart MacLean ++ * Copyright 2014-2015 ++ * based on code by Florian Meier ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/pcm512x.h" ++ ++#define HIFIBERRY_DACPRO_NOCLOCK 0 ++#define HIFIBERRY_DACPRO_CLK44EN 1 ++#define HIFIBERRY_DACPRO_CLK48EN 2 ++ ++struct pcm512x_priv { ++ struct regmap *regmap; ++ struct clk *sclk; ++}; ++ ++/* Clock rate of CLK44EN attached to GPIO6 pin */ ++#define CLK_44EN_RATE 22579200UL ++/* Clock rate of CLK48EN attached to GPIO3 pin */ ++#define CLK_48EN_RATE 24576000UL ++ ++static bool slave; ++static bool snd_rpi_hifiberry_is_dacpro; ++static bool digital_gain_0db_limit = true; ++ ++static void snd_rpi_hifiberry_dacplus_select_clk(struct snd_soc_codec *codec, ++ int clk_id) ++{ ++ switch (clk_id) { ++ case HIFIBERRY_DACPRO_NOCLOCK: ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x24, 0x00); ++ break; ++ case HIFIBERRY_DACPRO_CLK44EN: ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x24, 0x20); ++ break; ++ case HIFIBERRY_DACPRO_CLK48EN: ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x24, 0x04); ++ break; ++ } ++} ++ ++static void snd_rpi_hifiberry_dacplus_clk_gpio(struct snd_soc_codec *codec) ++{ ++ snd_soc_update_bits(codec, PCM512x_GPIO_EN, 0x24, 0x24); ++ snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_3, 0x0f, 0x02); ++ snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_6, 0x0f, 0x02); ++} ++ ++static bool snd_rpi_hifiberry_dacplus_is_sclk(struct snd_soc_codec *codec) ++{ ++ int sck; ++ ++ sck = snd_soc_read(codec, PCM512x_RATE_DET_4); ++ return (!(sck & 0x40)); ++} ++ ++static bool snd_rpi_hifiberry_dacplus_is_sclk_sleep( ++ struct snd_soc_codec *codec) ++{ ++ msleep(2); ++ return snd_rpi_hifiberry_dacplus_is_sclk(codec); ++} ++ ++static bool snd_rpi_hifiberry_dacplus_is_pro_card(struct snd_soc_codec *codec) ++{ ++ bool isClk44EN, isClk48En, isNoClk; ++ ++ snd_rpi_hifiberry_dacplus_clk_gpio(codec); ++ ++ snd_rpi_hifiberry_dacplus_select_clk(codec, HIFIBERRY_DACPRO_CLK44EN); ++ isClk44EN = snd_rpi_hifiberry_dacplus_is_sclk_sleep(codec); ++ ++ snd_rpi_hifiberry_dacplus_select_clk(codec, HIFIBERRY_DACPRO_NOCLOCK); ++ isNoClk = snd_rpi_hifiberry_dacplus_is_sclk_sleep(codec); ++ ++ snd_rpi_hifiberry_dacplus_select_clk(codec, HIFIBERRY_DACPRO_CLK48EN); ++ isClk48En = snd_rpi_hifiberry_dacplus_is_sclk_sleep(codec); ++ ++ return (isClk44EN && isClk48En && !isNoClk); ++} ++ ++static int snd_rpi_hifiberry_dacplus_clk_for_rate(int sample_rate) ++{ ++ int type; ++ ++ switch (sample_rate) { ++ case 11025: ++ case 22050: ++ case 44100: ++ case 88200: ++ case 176400: ++ type = HIFIBERRY_DACPRO_CLK44EN; ++ break; ++ default: ++ type = HIFIBERRY_DACPRO_CLK48EN; ++ break; ++ } ++ return type; ++} ++ ++static void snd_rpi_hifiberry_dacplus_set_sclk(struct snd_soc_codec *codec, ++ int sample_rate) ++{ ++ struct pcm512x_priv *pcm512x = snd_soc_codec_get_drvdata(codec); ++ ++ if (!IS_ERR(pcm512x->sclk)) { ++ int ctype; ++ ++ ctype = snd_rpi_hifiberry_dacplus_clk_for_rate(sample_rate); ++ clk_set_rate(pcm512x->sclk, (ctype == HIFIBERRY_DACPRO_CLK44EN) ++ ? CLK_44EN_RATE : CLK_48EN_RATE); ++ snd_rpi_hifiberry_dacplus_select_clk(codec, ctype); ++ } ++} ++ ++static int snd_rpi_hifiberry_dacplus_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_codec *codec = rtd->codec; ++ struct pcm512x_priv *priv; ++ ++ if (slave) ++ snd_rpi_hifiberry_is_dacpro = false; ++ else ++ snd_rpi_hifiberry_is_dacpro = ++ snd_rpi_hifiberry_dacplus_is_pro_card(codec); ++ ++ if (snd_rpi_hifiberry_is_dacpro) { ++ struct snd_soc_dai_link *dai = rtd->dai_link; ++ ++ dai->name = "HiFiBerry DAC+ Pro"; ++ dai->stream_name = "HiFiBerry DAC+ Pro HiFi"; ++ dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF ++ | SND_SOC_DAIFMT_CBM_CFM; ++ ++ snd_soc_update_bits(codec, PCM512x_BCLK_LRCLK_CFG, 0x31, 0x11); ++ snd_soc_update_bits(codec, PCM512x_MASTER_MODE, 0x03, 0x03); ++ snd_soc_update_bits(codec, PCM512x_MASTER_CLKDIV_2, 0x7f, 63); ++ } else { ++ priv = snd_soc_codec_get_drvdata(codec); ++ priv->sclk = ERR_PTR(-ENOENT); ++ } ++ ++ snd_soc_update_bits(codec, PCM512x_GPIO_EN, 0x08, 0x08); ++ snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_4, 0x0f, 0x02); ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); ++ ++ if (digital_gain_0db_limit) ++ { ++ int ret; ++ struct snd_soc_card *card = rtd->card; ++ ++ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); ++ } ++ ++ return 0; ++} ++ ++static int snd_rpi_hifiberry_dacplus_update_rate_den( ++ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ struct pcm512x_priv *pcm512x = snd_soc_codec_get_drvdata(codec); ++ struct snd_ratnum *rats_no_pll; ++ unsigned int num = 0, den = 0; ++ int err; ++ ++ rats_no_pll = devm_kzalloc(rtd->dev, sizeof(*rats_no_pll), GFP_KERNEL); ++ if (!rats_no_pll) ++ return -ENOMEM; ++ ++ rats_no_pll->num = clk_get_rate(pcm512x->sclk) / 64; ++ rats_no_pll->den_min = 1; ++ rats_no_pll->den_max = 128; ++ rats_no_pll->den_step = 1; ++ ++ err = snd_interval_ratnum(hw_param_interval(params, ++ SNDRV_PCM_HW_PARAM_RATE), 1, rats_no_pll, &num, &den); ++ if (err >= 0 && den) { ++ params->rate_num = num; ++ params->rate_den = den; ++ } ++ ++ devm_kfree(rtd->dev, rats_no_pll); ++ return 0; ++} ++ ++static int snd_rpi_hifiberry_dacplus_set_bclk_ratio_pro( ++ struct snd_soc_dai *cpu_dai, struct snd_pcm_hw_params *params) ++{ ++ int bratio = snd_pcm_format_physical_width(params_format(params)) ++ * params_channels(params); ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, bratio); ++} ++ ++static int snd_rpi_hifiberry_dacplus_hw_params( ++ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) ++{ ++ int ret; ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ if (snd_rpi_hifiberry_is_dacpro) { ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ snd_rpi_hifiberry_dacplus_set_sclk(codec, ++ params_rate(params)); ++ ++ ret = snd_rpi_hifiberry_dacplus_set_bclk_ratio_pro(cpu_dai, ++ params); ++ if (!ret) ++ ret = snd_rpi_hifiberry_dacplus_update_rate_den( ++ substream, params); ++ } else { ++ ret = snd_soc_dai_set_bclk_ratio(cpu_dai, 64); ++ } ++ return ret; ++} ++ ++static int snd_rpi_hifiberry_dacplus_startup( ++ struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); ++ return 0; ++} ++ ++static void snd_rpi_hifiberry_dacplus_shutdown( ++ struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08, 0x00); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_hifiberry_dacplus_ops = { ++ .hw_params = snd_rpi_hifiberry_dacplus_hw_params, ++ .startup = snd_rpi_hifiberry_dacplus_startup, ++ .shutdown = snd_rpi_hifiberry_dacplus_shutdown, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_hifiberry_dacplus_dai[] = { ++{ ++ .name = "HiFiBerry DAC+", ++ .stream_name = "HiFiBerry DAC+ HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm512x-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm512x.1-004d", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_hifiberry_dacplus_ops, ++ .init = snd_rpi_hifiberry_dacplus_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_hifiberry_dacplus = { ++ .name = "snd_rpi_hifiberry_dacplus", ++ .driver_name = "HifiberryDacp", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_hifiberry_dacplus_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_dacplus_dai), ++}; ++ ++static int snd_rpi_hifiberry_dacplus_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_hifiberry_dacplus.dev = &pdev->dev; ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai; ++ ++ dai = &snd_rpi_hifiberry_dacplus_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ ++ digital_gain_0db_limit = !of_property_read_bool( ++ pdev->dev.of_node, "hifiberry,24db_digital_gain"); ++ slave = of_property_read_bool(pdev->dev.of_node, ++ "hifiberry-dacplus,slave"); ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_hifiberry_dacplus); ++ if (ret) ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_hifiberry_dacplus_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_hifiberry_dacplus); ++} ++ ++static const struct of_device_id snd_rpi_hifiberry_dacplus_of_match[] = { ++ { .compatible = "hifiberry,hifiberry-dacplus", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_dacplus_of_match); ++ ++static struct platform_driver snd_rpi_hifiberry_dacplus_driver = { ++ .driver = { ++ .name = "snd-rpi-hifiberry-dacplus", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_hifiberry_dacplus_of_match, ++ }, ++ .probe = snd_rpi_hifiberry_dacplus_probe, ++ .remove = snd_rpi_hifiberry_dacplus_remove, ++}; ++ ++module_platform_driver(snd_rpi_hifiberry_dacplus_driver); ++ ++MODULE_AUTHOR("Daniel Matuschek "); ++MODULE_DESCRIPTION("ASoC Driver for HiFiBerry DAC+"); ++MODULE_LICENSE("GPL v2"); +--- a/sound/soc/codecs/pcm512x.c ++++ b/sound/soc/codecs/pcm512x.c +@@ -854,7 +854,8 @@ static int pcm512x_set_dividers(struct s + int fssp; + int gpio; + +- lrclk_div = snd_soc_params_to_frame_size(params); ++ lrclk_div = snd_pcm_format_physical_width(params_format(params)) ++ * params_channels(params); + if (lrclk_div == 0) { + dev_err(dev, "No LRCLK?\n"); + return -EINVAL; diff --git a/target/linux/brcm2708/patches-4.9/950-0073-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch b/target/linux/brcm2708/patches-4.9/950-0073-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch new file mode 100644 index 000000000000..9826be5725cf --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0073-Added-driver-for-HiFiBerry-Amp-amplifier-add-on-boar.patch @@ -0,0 +1,825 @@ +From 0f11b0757d5950ee7a8ba00e49ebefd2c649a6ba Mon Sep 17 00:00:00 2001 +From: Daniel Matuschek +Date: Mon, 4 Aug 2014 11:09:58 +0200 +Subject: [PATCH] Added driver for HiFiBerry Amp amplifier add-on board + +The driver contains a low-level hardware driver for the TAS5713 and the +drivers for the Raspberry Pi I2S subsystem. + +TAS5713: return error if initialisation fails + +Existing TAS5713 driver logs errors during initialisation, but does not return +an error code. Therefore even if initialisation fails, the driver will still be +loaded, but won't work. This patch fixes this. I2C communication error will now +reported correctly by a non-zero return code. + +HiFiBerry Amp: fix device-tree problems + +Some code to load the driver based on device-tree-overlays was missing. This is added by this patch. + +hifiberry-amp: Adjust for ALSA object refactoring + +See: https://github.com/raspberrypi/linux/issues/1775 +--- + sound/soc/bcm/Kconfig | 7 + + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/hifiberry_amp.c | 129 +++++++++++++++ + sound/soc/codecs/Kconfig | 4 + + sound/soc/codecs/Makefile | 2 + + sound/soc/codecs/tas5713.c | 371 ++++++++++++++++++++++++++++++++++++++++++ + sound/soc/codecs/tas5713.h | 210 ++++++++++++++++++++++++ + 7 files changed, 725 insertions(+) + create mode 100644 sound/soc/bcm/hifiberry_amp.c + create mode 100644 sound/soc/codecs/tas5713.c + create mode 100644 sound/soc/codecs/tas5713.h + +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -38,6 +38,13 @@ config SND_BCM2708_SOC_HIFIBERRY_DIGI + help + Say Y or M if you want to add support for HifiBerry Digi S/PDIF output board. + ++config SND_BCM2708_SOC_HIFIBERRY_AMP ++ tristate "Support for the HifiBerry Amp" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_TAS5713 ++ help ++ Say Y or M if you want to add support for the HifiBerry Amp amplifier board. ++ + config SND_BCM2708_SOC_RPI_DAC + tristate "Support for RPi-DAC" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -9,12 +9,14 @@ snd-soc-cygnus-objs := cygnus-pcm.o cygn + obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o + + # BCM2708 Machine Support ++snd-soc-hifiberry-amp-objs := hifiberry_amp.o + snd-soc-hifiberry-dac-objs := hifiberry_dac.o + snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o + snd-soc-hifiberry-digi-objs := hifiberry_digi.o + snd-soc-rpi-dac-objs := rpi-dac.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o + ++obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o +--- /dev/null ++++ b/sound/soc/bcm/hifiberry_amp.c +@@ -0,0 +1,129 @@ ++/* ++ * ASoC Driver for HifiBerry AMP ++ * ++ * Author: Sebastian Eickhoff ++ * Copyright 2014 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++static int snd_rpi_hifiberry_amp_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ // ToDo: init of the dsp-registers. ++ return 0; ++} ++ ++static int snd_rpi_hifiberry_amp_hw_params( struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params ) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 64); ++} ++ ++static struct snd_soc_ops snd_rpi_hifiberry_amp_ops = { ++ .hw_params = snd_rpi_hifiberry_amp_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_hifiberry_amp_dai[] = { ++ { ++ .name = "HifiBerry AMP", ++ .stream_name = "HifiBerry AMP HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "tas5713-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "tas5713.1-001b", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | ++ SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_hifiberry_amp_ops, ++ .init = snd_rpi_hifiberry_amp_init, ++ }, ++}; ++ ++ ++static struct snd_soc_card snd_rpi_hifiberry_amp = { ++ .name = "snd_rpi_hifiberry_amp", ++ .driver_name = "HifiberryAmp", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_hifiberry_amp_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_amp_dai), ++}; ++ ++static const struct of_device_id snd_rpi_hifiberry_amp_of_match[] = { ++ { .compatible = "hifiberry,hifiberry-amp", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_amp_of_match); ++ ++ ++static int snd_rpi_hifiberry_amp_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_hifiberry_amp.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_hifiberry_amp_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_hifiberry_amp); ++ ++ if (ret != 0) { ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); ++ } ++ ++ return ret; ++} ++ ++ ++static int snd_rpi_hifiberry_amp_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_hifiberry_amp); ++} ++ ++ ++static struct platform_driver snd_rpi_hifiberry_amp_driver = { ++ .driver = { ++ .name = "snd-hifiberry-amp", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_hifiberry_amp_of_match, ++ }, ++ .probe = snd_rpi_hifiberry_amp_probe, ++ .remove = snd_rpi_hifiberry_amp_remove, ++}; ++ ++ ++module_platform_driver(snd_rpi_hifiberry_amp_driver); ++ ++ ++MODULE_AUTHOR("Sebastian Eickhoff "); ++MODULE_DESCRIPTION("ASoC driver for HiFiBerry-AMP"); ++MODULE_LICENSE("GPL v2"); +--- a/sound/soc/codecs/Kconfig ++++ b/sound/soc/codecs/Kconfig +@@ -139,6 +139,7 @@ config SND_SOC_ALL_CODECS + select SND_SOC_TFA9879 if I2C + select SND_SOC_TLV320AIC23_I2C if I2C + select SND_SOC_TLV320AIC23_SPI if SPI_MASTER ++ select SND_SOC_TAS5713 if I2C + select SND_SOC_TLV320AIC26 if SPI_MASTER + select SND_SOC_TLV320AIC31XX if I2C + select SND_SOC_TLV320AIC32X4_I2C if I2C +@@ -821,6 +822,9 @@ config SND_SOC_TFA9879 + tristate "NXP Semiconductors TFA9879 amplifier" + depends on I2C + ++config SND_SOC_TAS5713 ++ tristate ++ + config SND_SOC_TLV320AIC23 + tristate + +--- a/sound/soc/codecs/Makefile ++++ b/sound/soc/codecs/Makefile +@@ -144,6 +144,7 @@ snd-soc-tas5086-objs := tas5086.o + snd-soc-tas571x-objs := tas571x.o + snd-soc-tas5720-objs := tas5720.o + snd-soc-tfa9879-objs := tfa9879.o ++snd-soc-tas5713-objs := tas5713.o + snd-soc-tlv320aic23-objs := tlv320aic23.o + snd-soc-tlv320aic23-i2c-objs := tlv320aic23-i2c.o + snd-soc-tlv320aic23-spi-objs := tlv320aic23-spi.o +@@ -366,6 +367,7 @@ obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc + obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o + obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o + obj-$(CONFIG_SND_SOC_TFA9879) += snd-soc-tfa9879.o ++obj-$(CONFIG_SND_SOC_TAS5713) += snd-soc-tas5713.o + obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o + obj-$(CONFIG_SND_SOC_TLV320AIC23_I2C) += snd-soc-tlv320aic23-i2c.o + obj-$(CONFIG_SND_SOC_TLV320AIC23_SPI) += snd-soc-tlv320aic23-spi.o +--- /dev/null ++++ b/sound/soc/codecs/tas5713.c +@@ -0,0 +1,371 @@ ++/* ++ * ASoC Driver for TAS5713 ++ * ++ * Author: Sebastian Eickhoff ++ * Copyright 2014 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "tas5713.h" ++ ++ ++static struct i2c_client *i2c; ++ ++struct tas5713_priv { ++ struct regmap *regmap; ++ int mclk_div; ++ struct snd_soc_codec *codec; ++}; ++ ++static struct tas5713_priv *priv_data; ++ ++ ++ ++ ++/* ++ * _ _ ___ _ ___ _ _ ++ * /_\ | | / __| /_\ / __|___ _ _| |_ _ _ ___| |___ ++ * / _ \| |__\__ \/ _ \ | (__/ _ \ ' \ _| '_/ _ \ (_-< ++ * /_/ \_\____|___/_/ \_\ \___\___/_||_\__|_| \___/_/__/ ++ * ++ */ ++ ++static const DECLARE_TLV_DB_SCALE(tas5713_vol_tlv, -10000, 50, 1); ++ ++ ++static const struct snd_kcontrol_new tas5713_snd_controls[] = { ++ SOC_SINGLE_TLV ("Master" , TAS5713_VOL_MASTER, 0, 248, 1, tas5713_vol_tlv), ++ SOC_DOUBLE_R_TLV("Channels" , TAS5713_VOL_CH1, TAS5713_VOL_CH2, 0, 248, 1, tas5713_vol_tlv) ++}; ++ ++ ++ ++ ++/* ++ * __ __ _ _ ___ _ ++ * | \/ |__ _ __| |_ (_)_ _ ___ | \ _ _(_)_ _____ _ _ ++ * | |\/| / _` / _| ' \| | ' \/ -_) | |) | '_| \ V / -_) '_| ++ * |_| |_\__,_\__|_||_|_|_||_\___| |___/|_| |_|\_/\___|_| ++ * ++ */ ++ ++static int tas5713_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params, ++ struct snd_soc_dai *dai) ++{ ++ u16 blen = 0x00; ++ ++ struct snd_soc_codec *codec; ++ codec = dai->codec; ++ priv_data->codec = dai->codec; ++ ++ switch (params_format(params)) { ++ case SNDRV_PCM_FORMAT_S16_LE: ++ blen = 0x03; ++ break; ++ case SNDRV_PCM_FORMAT_S20_3LE: ++ blen = 0x1; ++ break; ++ case SNDRV_PCM_FORMAT_S24_LE: ++ blen = 0x04; ++ break; ++ case SNDRV_PCM_FORMAT_S32_LE: ++ blen = 0x05; ++ break; ++ default: ++ dev_err(dai->dev, "Unsupported word length: %u\n", ++ params_format(params)); ++ return -EINVAL; ++ } ++ ++ // set word length ++ snd_soc_update_bits(codec, TAS5713_SERIAL_DATA_INTERFACE, 0x7, blen); ++ ++ return 0; ++} ++ ++ ++static int tas5713_mute_stream(struct snd_soc_dai *dai, int mute, int stream) ++{ ++ unsigned int val = 0; ++ ++ struct tas5713_priv *tas5713; ++ struct snd_soc_codec *codec = dai->codec; ++ tas5713 = snd_soc_codec_get_drvdata(codec); ++ ++ if (mute) { ++ val = TAS5713_SOFT_MUTE_ALL; ++ } ++ ++ return regmap_write(tas5713->regmap, TAS5713_SOFT_MUTE, val); ++} ++ ++ ++static const struct snd_soc_dai_ops tas5713_dai_ops = { ++ .hw_params = tas5713_hw_params, ++ .mute_stream = tas5713_mute_stream, ++}; ++ ++ ++static struct snd_soc_dai_driver tas5713_dai = { ++ .name = "tas5713-hifi", ++ .playback = { ++ .stream_name = "Playback", ++ .channels_min = 2, ++ .channels_max = 2, ++ .rates = SNDRV_PCM_RATE_8000_48000, ++ .formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE ), ++ }, ++ .ops = &tas5713_dai_ops, ++}; ++ ++ ++ ++ ++/* ++ * ___ _ ___ _ ++ * / __|___ __| |___ __ | \ _ _(_)_ _____ _ _ ++ * | (__/ _ \/ _` / -_) _| | |) | '_| \ V / -_) '_| ++ * \___\___/\__,_\___\__| |___/|_| |_|\_/\___|_| ++ * ++ */ ++ ++static int tas5713_remove(struct snd_soc_codec *codec) ++{ ++ struct tas5713_priv *tas5713; ++ ++ tas5713 = snd_soc_codec_get_drvdata(codec); ++ ++ return 0; ++} ++ ++ ++static int tas5713_probe(struct snd_soc_codec *codec) ++{ ++ struct tas5713_priv *tas5713; ++ int i, ret; ++ ++ i2c = container_of(codec->dev, struct i2c_client, dev); ++ ++ tas5713 = snd_soc_codec_get_drvdata(codec); ++ ++ // Reset error ++ ret = snd_soc_write(codec, TAS5713_ERROR_STATUS, 0x00); ++ if (ret < 0) return ret; ++ ++ // Trim oscillator ++ ret = snd_soc_write(codec, TAS5713_OSC_TRIM, 0x00); ++ if (ret < 0) return ret; ++ msleep(1000); ++ ++ // Reset error ++ ret = snd_soc_write(codec, TAS5713_ERROR_STATUS, 0x00); ++ if (ret < 0) return ret; ++ ++ // Clock mode: 44/48kHz, MCLK=64xfs ++ ret = snd_soc_write(codec, TAS5713_CLOCK_CTRL, 0x60); ++ if (ret < 0) return ret; ++ ++ // I2S 24bit ++ ret = snd_soc_write(codec, TAS5713_SERIAL_DATA_INTERFACE, 0x05); ++ if (ret < 0) return ret; ++ ++ // Unmute ++ ret = snd_soc_write(codec, TAS5713_SYSTEM_CTRL2, 0x00); ++ if (ret < 0) return ret; ++ ret = snd_soc_write(codec, TAS5713_SOFT_MUTE, 0x00); ++ if (ret < 0) return ret; ++ ++ // Set volume to 0db ++ ret = snd_soc_write(codec, TAS5713_VOL_MASTER, 0x00); ++ if (ret < 0) return ret; ++ ++ // Now start programming the default initialization sequence ++ for (i = 0; i < ARRAY_SIZE(tas5713_init_sequence); ++i) { ++ ret = i2c_master_send(i2c, ++ tas5713_init_sequence[i].data, ++ tas5713_init_sequence[i].size); ++ if (ret < 0) { ++ printk(KERN_INFO "TAS5713 CODEC PROBE: InitSeq returns: %d\n", ret); ++ } ++ } ++ ++ // Unmute ++ ret = snd_soc_write(codec, TAS5713_SYSTEM_CTRL2, 0x00); ++ if (ret < 0) return ret; ++ ++ return 0; ++} ++ ++ ++static struct snd_soc_codec_driver soc_codec_dev_tas5713 = { ++ .probe = tas5713_probe, ++ .remove = tas5713_remove, ++ .component_driver = { ++ .controls = tas5713_snd_controls, ++ .num_controls = ARRAY_SIZE(tas5713_snd_controls), ++ }, ++}; ++ ++ ++ ++ ++/* ++ * ___ ___ ___ ___ _ ++ * |_ _|_ ) __| | \ _ _(_)_ _____ _ _ ++ * | | / / (__ | |) | '_| \ V / -_) '_| ++ * |___/___\___| |___/|_| |_|\_/\___|_| ++ * ++ */ ++ ++static const struct reg_default tas5713_reg_defaults[] = { ++ { 0x07 ,0x80 }, // R7 - VOL_MASTER - -40dB ++ { 0x08 , 30 }, // R8 - VOL_CH1 - 0dB ++ { 0x09 , 30 }, // R9 - VOL_CH2 - 0dB ++ { 0x0A ,0x80 }, // R10 - VOL_HEADPHONE - -40dB ++}; ++ ++ ++static bool tas5713_reg_volatile(struct device *dev, unsigned int reg) ++{ ++ switch (reg) { ++ case TAS5713_DEVICE_ID: ++ case TAS5713_ERROR_STATUS: ++ return true; ++ default: ++ return false; ++ } ++} ++ ++ ++static const struct of_device_id tas5713_of_match[] = { ++ { .compatible = "ti,tas5713", }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, tas5713_of_match); ++ ++ ++static struct regmap_config tas5713_regmap_config = { ++ .reg_bits = 8, ++ .val_bits = 8, ++ ++ .max_register = TAS5713_MAX_REGISTER, ++ .volatile_reg = tas5713_reg_volatile, ++ ++ .cache_type = REGCACHE_RBTREE, ++ .reg_defaults = tas5713_reg_defaults, ++ .num_reg_defaults = ARRAY_SIZE(tas5713_reg_defaults), ++}; ++ ++ ++static int tas5713_i2c_probe(struct i2c_client *i2c, ++ const struct i2c_device_id *id) ++{ ++ int ret; ++ ++ priv_data = devm_kzalloc(&i2c->dev, sizeof *priv_data, GFP_KERNEL); ++ if (!priv_data) ++ return -ENOMEM; ++ ++ priv_data->regmap = devm_regmap_init_i2c(i2c, &tas5713_regmap_config); ++ if (IS_ERR(priv_data->regmap)) { ++ ret = PTR_ERR(priv_data->regmap); ++ return ret; ++ } ++ ++ i2c_set_clientdata(i2c, priv_data); ++ ++ ret = snd_soc_register_codec(&i2c->dev, ++ &soc_codec_dev_tas5713, &tas5713_dai, 1); ++ ++ return ret; ++} ++ ++ ++static int tas5713_i2c_remove(struct i2c_client *i2c) ++{ ++ snd_soc_unregister_codec(&i2c->dev); ++ i2c_set_clientdata(i2c, NULL); ++ ++ kfree(priv_data); ++ ++ return 0; ++} ++ ++ ++static const struct i2c_device_id tas5713_i2c_id[] = { ++ { "tas5713", 0 }, ++ { } ++}; ++ ++MODULE_DEVICE_TABLE(i2c, tas5713_i2c_id); ++ ++ ++static struct i2c_driver tas5713_i2c_driver = { ++ .driver = { ++ .name = "tas5713", ++ .owner = THIS_MODULE, ++ .of_match_table = tas5713_of_match, ++ }, ++ .probe = tas5713_i2c_probe, ++ .remove = tas5713_i2c_remove, ++ .id_table = tas5713_i2c_id ++}; ++ ++ ++static int __init tas5713_modinit(void) ++{ ++ int ret = 0; ++ ++ ret = i2c_add_driver(&tas5713_i2c_driver); ++ if (ret) { ++ printk(KERN_ERR "Failed to register tas5713 I2C driver: %d\n", ++ ret); ++ } ++ ++ return ret; ++} ++module_init(tas5713_modinit); ++ ++ ++static void __exit tas5713_exit(void) ++{ ++ i2c_del_driver(&tas5713_i2c_driver); ++} ++module_exit(tas5713_exit); ++ ++ ++MODULE_AUTHOR("Sebastian Eickhoff "); ++MODULE_DESCRIPTION("ASoC driver for TAS5713"); ++MODULE_LICENSE("GPL v2"); +--- /dev/null ++++ b/sound/soc/codecs/tas5713.h +@@ -0,0 +1,210 @@ ++/* ++ * ASoC Driver for TAS5713 ++ * ++ * Author: Sebastian Eickhoff ++ * Copyright 2014 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#ifndef _TAS5713_H ++#define _TAS5713_H ++ ++ ++// TAS5713 I2C-bus register addresses ++ ++#define TAS5713_CLOCK_CTRL 0x00 ++#define TAS5713_DEVICE_ID 0x01 ++#define TAS5713_ERROR_STATUS 0x02 ++#define TAS5713_SYSTEM_CTRL1 0x03 ++#define TAS5713_SERIAL_DATA_INTERFACE 0x04 ++#define TAS5713_SYSTEM_CTRL2 0x05 ++#define TAS5713_SOFT_MUTE 0x06 ++#define TAS5713_VOL_MASTER 0x07 ++#define TAS5713_VOL_CH1 0x08 ++#define TAS5713_VOL_CH2 0x09 ++#define TAS5713_VOL_HEADPHONE 0x0A ++#define TAS5713_VOL_CONFIG 0x0E ++#define TAS5713_MODULATION_LIMIT 0x10 ++#define TAS5713_IC_DLY_CH1 0x11 ++#define TAS5713_IC_DLY_CH2 0x12 ++#define TAS5713_IC_DLY_CH3 0x13 ++#define TAS5713_IC_DLY_CH4 0x14 ++ ++#define TAS5713_START_STOP_PERIOD 0x1A ++#define TAS5713_OSC_TRIM 0x1B ++#define TAS5713_BKND_ERR 0x1C ++ ++#define TAS5713_INPUT_MUX 0x20 ++#define TAS5713_SRC_SELECT_CH4 0x21 ++#define TAS5713_PWM_MUX 0x25 ++ ++#define TAS5713_CH1_BQ0 0x29 ++#define TAS5713_CH1_BQ1 0x2A ++#define TAS5713_CH1_BQ2 0x2B ++#define TAS5713_CH1_BQ3 0x2C ++#define TAS5713_CH1_BQ4 0x2D ++#define TAS5713_CH1_BQ5 0x2E ++#define TAS5713_CH1_BQ6 0x2F ++#define TAS5713_CH1_BQ7 0x58 ++#define TAS5713_CH1_BQ8 0x59 ++ ++#define TAS5713_CH2_BQ0 0x30 ++#define TAS5713_CH2_BQ1 0x31 ++#define TAS5713_CH2_BQ2 0x32 ++#define TAS5713_CH2_BQ3 0x33 ++#define TAS5713_CH2_BQ4 0x34 ++#define TAS5713_CH2_BQ5 0x35 ++#define TAS5713_CH2_BQ6 0x36 ++#define TAS5713_CH2_BQ7 0x5C ++#define TAS5713_CH2_BQ8 0x5D ++ ++#define TAS5713_CH4_BQ0 0x5A ++#define TAS5713_CH4_BQ1 0x5B ++#define TAS5713_CH3_BQ0 0x5E ++#define TAS5713_CH3_BQ1 0x5F ++ ++#define TAS5713_DRC1_SOFTENING_FILTER_ALPHA_OMEGA 0x3B ++#define TAS5713_DRC1_ATTACK_RELEASE_RATE 0x3C ++#define TAS5713_DRC2_SOFTENING_FILTER_ALPHA_OMEGA 0x3E ++#define TAS5713_DRC2_ATTACK_RELEASE_RATE 0x3F ++#define TAS5713_DRC1_ATTACK_RELEASE_THRES 0x40 ++#define TAS5713_DRC2_ATTACK_RELEASE_THRES 0x43 ++#define TAS5713_DRC_CTRL 0x46 ++ ++#define TAS5713_BANK_SW_CTRL 0x50 ++#define TAS5713_CH1_OUTPUT_MIXER 0x51 ++#define TAS5713_CH2_OUTPUT_MIXER 0x52 ++#define TAS5713_CH1_INPUT_MIXER 0x53 ++#define TAS5713_CH2_INPUT_MIXER 0x54 ++#define TAS5713_OUTPUT_POST_SCALE 0x56 ++#define TAS5713_OUTPUT_PRESCALE 0x57 ++ ++#define TAS5713_IDF_POST_SCALE 0x62 ++ ++#define TAS5713_CH1_INLINE_MIXER 0x70 ++#define TAS5713_CH1_INLINE_DRC_EN_MIXER 0x71 ++#define TAS5713_CH1_R_CHANNEL_MIXER 0x72 ++#define TAS5713_CH1_L_CHANNEL_MIXER 0x73 ++#define TAS5713_CH2_INLINE_MIXER 0x74 ++#define TAS5713_CH2_INLINE_DRC_EN_MIXER 0x75 ++#define TAS5713_CH2_L_CHANNEL_MIXER 0x76 ++#define TAS5713_CH2_R_CHANNEL_MIXER 0x77 ++ ++#define TAS5713_UPDATE_DEV_ADDR_KEY 0xF8 ++#define TAS5713_UPDATE_DEV_ADDR_REG 0xF9 ++ ++#define TAS5713_REGISTER_COUNT 0x46 ++#define TAS5713_MAX_REGISTER 0xF9 ++ ++ ++// Bitmasks for registers ++#define TAS5713_SOFT_MUTE_ALL 0x07 ++ ++ ++ ++struct tas5713_init_command { ++ const int size; ++ const char *const data; ++}; ++ ++static const struct tas5713_init_command tas5713_init_sequence[] = { ++ ++ // Trim oscillator ++ { .size = 2, .data = "\x1B\x00" }, ++ // System control register 1 (0x03): block DC ++ { .size = 2, .data = "\x03\x80" }, ++ // Mute everything ++ { .size = 2, .data = "\x05\x40" }, ++ // Modulation limit register (0x10): 97.7% ++ { .size = 2, .data = "\x10\x02" }, ++ // Interchannel delay registers ++ // (0x11, 0x12, 0x13, and 0x14): BD mode ++ { .size = 2, .data = "\x11\xB8" }, ++ { .size = 2, .data = "\x12\x60" }, ++ { .size = 2, .data = "\x13\xA0" }, ++ { .size = 2, .data = "\x14\x48" }, ++ // PWM shutdown group register (0x19): no shutdown ++ { .size = 2, .data = "\x19\x00" }, ++ // Input multiplexer register (0x20): BD mode ++ { .size = 2, .data = "\x20\x00\x89\x77\x72" }, ++ // PWM output mux register (0x25) ++ // Channel 1 --> OUTA, channel 1 neg --> OUTB ++ // Channel 2 --> OUTC, channel 2 neg --> OUTD ++ { .size = 5, .data = "\x25\x01\x02\x13\x45" }, ++ // DRC control (0x46): DRC off ++ { .size = 5, .data = "\x46\x00\x00\x00\x00" }, ++ // BKND_ERR register (0x1C): 299ms reset period ++ { .size = 2, .data = "\x1C\x07" }, ++ // Mute channel 3 ++ { .size = 2, .data = "\x0A\xFF" }, ++ // Volume configuration register (0x0E): volume slew 512 steps ++ { .size = 2, .data = "\x0E\x90" }, ++ // Clock control register (0x00): 44/48kHz, MCLK=64xfs ++ { .size = 2, .data = "\x00\x60" }, ++ // Bank switch and eq control (0x50): no bank switching ++ { .size = 5, .data = "\x50\x00\x00\x00\x00" }, ++ // Volume registers (0x07, 0x08, 0x09, 0x0A) ++ { .size = 2, .data = "\x07\x20" }, ++ { .size = 2, .data = "\x08\x30" }, ++ { .size = 2, .data = "\x09\x30" }, ++ { .size = 2, .data = "\x0A\xFF" }, ++ // 0x72, 0x73, 0x76, 0x77 input mixer: ++ // no intermix between channels ++ { .size = 5, .data = "\x72\x00\x00\x00\x00" }, ++ { .size = 5, .data = "\x73\x00\x80\x00\x00" }, ++ { .size = 5, .data = "\x76\x00\x00\x00\x00" }, ++ { .size = 5, .data = "\x77\x00\x80\x00\x00" }, ++ // 0x70, 0x71, 0x74, 0x75 inline DRC mixer: ++ // no inline DRC inmix ++ { .size = 5, .data = "\x70\x00\x80\x00\x00" }, ++ { .size = 5, .data = "\x71\x00\x00\x00\x00" }, ++ { .size = 5, .data = "\x74\x00\x80\x00\x00" }, ++ { .size = 5, .data = "\x75\x00\x00\x00\x00" }, ++ // 0x56, 0x57 Output scale ++ { .size = 5, .data = "\x56\x00\x80\x00\x00" }, ++ { .size = 5, .data = "\x57\x00\x02\x00\x00" }, ++ // 0x3B, 0x3c ++ { .size = 9, .data = "\x3B\x00\x08\x00\x00\x00\x78\x00\x00" }, ++ { .size = 9, .data = "\x3C\x00\x00\x01\x00\xFF\xFF\xFF\x00" }, ++ { .size = 9, .data = "\x3E\x00\x08\x00\x00\x00\x78\x00\x00" }, ++ { .size = 9, .data = "\x3F\x00\x00\x01\x00\xFF\xFF\xFF\x00" }, ++ { .size = 9, .data = "\x40\x00\x00\x01\x00\xFF\xFF\xFF\x00" }, ++ { .size = 9, .data = "\x43\x00\x00\x01\x00\xFF\xFF\xFF\x00" }, ++ // 0x51, 0x52: output mixer ++ { .size = 9, .data = "\x51\x00\x80\x00\x00\x00\x00\x00\x00" }, ++ { .size = 9, .data = "\x52\x00\x80\x00\x00\x00\x00\x00\x00" }, ++ // PEQ defaults ++ { .size = 21, .data = "\x29\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x2A\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x2B\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x2C\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x2D\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x2E\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x2F\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x30\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x31\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x32\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x33\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x34\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x35\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x36\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x58\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x59\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x5C\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x5D\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x5E\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x5F\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x5A\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++ { .size = 21, .data = "\x5B\x00\x80\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" }, ++}; ++ ++ ++#endif /* _TAS5713_H */ diff --git a/target/linux/brcm2708/patches-4.9/950-0074-Update-ds1307-driver-for-device-tree-support.patch b/target/linux/brcm2708/patches-4.9/950-0074-Update-ds1307-driver-for-device-tree-support.patch new file mode 100644 index 000000000000..d4f7e762c2b5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0074-Update-ds1307-driver-for-device-tree-support.patch @@ -0,0 +1,27 @@ +From b3ff56f28a9531048812a51ded7c16a952d1ead4 Mon Sep 17 00:00:00 2001 +From: Ryan Coe +Date: Sat, 31 Jan 2015 18:25:49 -0700 +Subject: [PATCH] Update ds1307 driver for device-tree support + +Signed-off-by: Ryan Coe +--- + drivers/rtc/rtc-ds1307.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/drivers/rtc/rtc-ds1307.c ++++ b/drivers/rtc/rtc-ds1307.c +@@ -1675,6 +1675,14 @@ static int ds1307_remove(struct i2c_clie + return 0; + } + ++#ifdef CONFIG_OF ++static const struct of_device_id ds1307_of_match[] = { ++ { .compatible = "maxim,ds1307" }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, ds1307_of_match); ++#endif ++ + static struct i2c_driver ds1307_driver = { + .driver = { + .name = "rtc-ds1307", diff --git a/target/linux/brcm2708/patches-4.9/950-0075-Add-driver-for-rpi-proto.patch b/target/linux/brcm2708/patches-4.9/950-0075-Add-driver-for-rpi-proto.patch new file mode 100644 index 000000000000..b8db1d560866 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0075-Add-driver-for-rpi-proto.patch @@ -0,0 +1,211 @@ +From b351d2ffe294c9d5e8cde9caa3a94017ecec81d9 Mon Sep 17 00:00:00 2001 +From: Waldemar Brodkorb +Date: Wed, 25 Mar 2015 09:26:17 +0100 +Subject: [PATCH] Add driver for rpi-proto + +Forward port of 3.10.x driver from https://github.com/koalo +We are using a custom board and would like to use rpi 3.18.x +kernel. Patch works fine for our embedded system. + +URL to the audio chip: +http://www.mikroe.com/add-on-boards/audio-voice/audio-codec-proto/ + +Playback tested with devicetree enabled. + +Signed-off-by: Waldemar Brodkorb +--- + sound/soc/bcm/Kconfig | 7 +++ + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/rpi-proto.c | 154 ++++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 163 insertions(+) + create mode 100644 sound/soc/bcm/rpi-proto.c + +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -52,6 +52,13 @@ config SND_BCM2708_SOC_RPI_DAC + help + Say Y or M if you want to add support for RPi-DAC. + ++config SND_BCM2708_SOC_RPI_PROTO ++ tristate "Support for Rpi-PROTO" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_WM8731 ++ help ++ Say Y or M if you want to add support for Audio Codec Board PROTO (WM8731). ++ + config SND_BCM2708_SOC_IQAUDIO_DAC + tristate "Support for IQaudIO-DAC" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -14,6 +14,7 @@ snd-soc-hifiberry-dac-objs := hifiberry_ + snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o + snd-soc-hifiberry-digi-objs := hifiberry_digi.o + snd-soc-rpi-dac-objs := rpi-dac.o ++snd-soc-rpi-proto-objs := rpi-proto.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o + + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o +@@ -21,4 +22,5 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_D + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o ++obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o +--- /dev/null ++++ b/sound/soc/bcm/rpi-proto.c +@@ -0,0 +1,154 @@ ++/* ++ * ASoC driver for PROTO AudioCODEC (with a WM8731) ++ * connected to a Raspberry Pi ++ * ++ * Author: Florian Meier, ++ * Copyright 2013 ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "../codecs/wm8731.h" ++ ++static const unsigned int wm8731_rates_12288000[] = { ++ 8000, 32000, 48000, 96000, ++}; ++ ++static struct snd_pcm_hw_constraint_list wm8731_constraints_12288000 = { ++ .list = wm8731_rates_12288000, ++ .count = ARRAY_SIZE(wm8731_rates_12288000), ++}; ++ ++static int snd_rpi_proto_startup(struct snd_pcm_substream *substream) ++{ ++ /* Setup constraints, because there is a 12.288 MHz XTAL on the board */ ++ snd_pcm_hw_constraint_list(substream->runtime, 0, ++ SNDRV_PCM_HW_PARAM_RATE, ++ &wm8731_constraints_12288000); ++ return 0; ++} ++ ++static int snd_rpi_proto_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ int sysclk = 12288000; /* This is fixed on this board */ ++ ++ /* Set proto bclk */ ++ int ret = snd_soc_dai_set_bclk_ratio(cpu_dai,32*2); ++ if (ret < 0){ ++ dev_err(codec->dev, ++ "Failed to set BCLK ratio %d\n", ret); ++ return ret; ++ } ++ ++ /* Set proto sysclk */ ++ ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL, ++ sysclk, SND_SOC_CLOCK_IN); ++ if (ret < 0) { ++ dev_err(codec->dev, ++ "Failed to set WM8731 SYSCLK: %d\n", ret); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_proto_ops = { ++ .startup = snd_rpi_proto_startup, ++ .hw_params = snd_rpi_proto_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_proto_dai[] = { ++{ ++ .name = "WM8731", ++ .stream_name = "WM8731 HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "wm8731-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "wm8731.1-001a", ++ .dai_fmt = SND_SOC_DAIFMT_I2S ++ | SND_SOC_DAIFMT_NB_NF ++ | SND_SOC_DAIFMT_CBM_CFM, ++ .ops = &snd_rpi_proto_ops, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_proto = { ++ .name = "snd_rpi_proto", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_proto_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_proto_dai), ++}; ++ ++static int snd_rpi_proto_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_proto.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_proto_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_proto); ++ if (ret) { ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ } ++ ++ return ret; ++} ++ ++ ++static int snd_rpi_proto_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_proto); ++} ++ ++static const struct of_device_id snd_rpi_proto_of_match[] = { ++ { .compatible = "rpi,rpi-proto", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_proto_of_match); ++ ++static struct platform_driver snd_rpi_proto_driver = { ++ .driver = { ++ .name = "snd-rpi-proto", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_proto_of_match, ++ }, ++ .probe = snd_rpi_proto_probe, ++ .remove = snd_rpi_proto_remove, ++}; ++ ++module_platform_driver(snd_rpi_proto_driver); ++ ++MODULE_AUTHOR("Florian Meier"); ++MODULE_DESCRIPTION("ASoC Driver for Raspberry Pi connected to PROTO board (WM8731)"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/brcm2708/patches-4.9/950-0076-RaspiDAC3-support.patch b/target/linux/brcm2708/patches-4.9/950-0076-RaspiDAC3-support.patch new file mode 100644 index 000000000000..de68bbf6b684 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0076-RaspiDAC3-support.patch @@ -0,0 +1,238 @@ +From b545537294ffc7e21fcc5e0c78ea8ac20c9ecd3f Mon Sep 17 00:00:00 2001 +From: Jan Grulich +Date: Mon, 24 Aug 2015 16:03:47 +0100 +Subject: [PATCH] RaspiDAC3 support + +Signed-off-by: Jan Grulich + +config: fix RaspiDAC Rev.3x dependencies + +Change depends to SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +like the other I2S soundcard drivers. + +Signed-off-by: Matthias Reichl +--- + sound/soc/bcm/Kconfig | 8 ++ + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/raspidac3.c | 186 ++++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 196 insertions(+) + create mode 100644 sound/soc/bcm/raspidac3.c + +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -65,3 +65,11 @@ config SND_BCM2708_SOC_IQAUDIO_DAC + select SND_SOC_PCM512x_I2C + help + Say Y or M if you want to add support for IQaudIO-DAC. ++ ++config SND_BCM2708_SOC_RASPIDAC3 ++ tristate "Support for RaspiDAC Rev.3x" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM512x_I2C ++ select SND_SOC_TPA6130A2 ++ help ++ Say Y or M if you want to add support for RaspiDAC Rev.3x. +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -16,6 +16,7 @@ snd-soc-hifiberry-digi-objs := hifiberry + snd-soc-rpi-dac-objs := rpi-dac.o + snd-soc-rpi-proto-objs := rpi-proto.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o ++snd-soc-raspidac3-objs := raspidac3.o + + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o +@@ -24,3 +25,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_D + obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o ++obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o +--- /dev/null ++++ b/sound/soc/bcm/raspidac3.c +@@ -0,0 +1,186 @@ ++/* ++ * ASoC Driver for RaspiDAC v3 ++ * ++ * Author: Jan Grulich ++ * Copyright 2015 ++ * based on code by Daniel Matuschek ++ * based on code by Florian Meier ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/pcm512x.h" ++#include "../codecs/tpa6130a2.h" ++ ++/* sound card init */ ++static int snd_rpi_raspidac3_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ int ret; ++ struct snd_soc_card *card = rtd->card; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, PCM512x_GPIO_EN, 0x08, 0x08); ++ snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_4, 0xf, 0x02); ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00); ++ ++ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); ++ else { ++ struct snd_kcontrol *kctl; ++ ++ ret = snd_soc_limit_volume(card, ++ "TPA6130A2 Headphone Playback Volume", ++ 54); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to set TPA6130A2 volume limit: %d\n", ++ ret); ++ kctl = snd_soc_card_get_kcontrol(card, ++ "TPA6130A2 Headphone Playback Volume"); ++ if (kctl) { ++ strcpy(kctl->id.name, "Headphones Playback Volume"); ++ /* disable the volume dB scale so alsamixer works */ ++ kctl->vd[0].access = SNDRV_CTL_ELEM_ACCESS_READWRITE; ++ } ++ ++ kctl = snd_soc_card_get_kcontrol(card, ++ "TPA6130A2 Headphone Playback Switch"); ++ if (kctl) ++ strcpy(kctl->id.name, "Headphones Playback Switch"); ++ } ++ ++ return 0; ++} ++ ++/* set hw parameters */ ++static int snd_rpi_raspidac3_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ unsigned int sample_bits = ++ snd_pcm_format_physical_width(params_format(params)); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); ++} ++ ++/* startup */ ++static int snd_rpi_raspidac3_startup(struct snd_pcm_substream *substream) { ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x08); ++ return 0; ++} ++ ++/* shutdown */ ++static void snd_rpi_raspidac3_shutdown(struct snd_pcm_substream *substream) { ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_raspidac3_ops = { ++ .hw_params = snd_rpi_raspidac3_hw_params, ++ .startup = snd_rpi_raspidac3_startup, ++ .shutdown = snd_rpi_raspidac3_shutdown, ++}; ++ ++/* interface setup */ ++static struct snd_soc_dai_link snd_rpi_raspidac3_dai[] = { ++{ ++ .name = "RaspiDAC Rev.3x", ++ .stream_name = "RaspiDAC HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm512x-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm512x.1-004c", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_raspidac3_ops, ++ .init = snd_rpi_raspidac3_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_raspidac3 = { ++ .name = "RaspiDAC Rev.3x HiFi Audio Card", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_raspidac3_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_raspidac3_dai), ++}; ++ ++/* sound card test */ ++static int snd_rpi_raspidac3_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_raspidac3.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_raspidac3_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_raspidac3); ++ if (ret) ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++/* sound card disconnect */ ++static int snd_rpi_raspidac3_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_raspidac3); ++} ++ ++static const struct of_device_id raspidac3_of_match[] = { ++ { .compatible = "jg,raspidacv3", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, raspidac3_of_match); ++ ++/* sound card platform driver */ ++static struct platform_driver snd_rpi_raspidac3_driver = { ++ .driver = { ++ .name = "snd-rpi-raspidac3", ++ .owner = THIS_MODULE, ++ .of_match_table = raspidac3_of_match, ++ }, ++ .probe = snd_rpi_raspidac3_probe, ++ .remove = snd_rpi_raspidac3_remove, ++}; ++ ++module_platform_driver(snd_rpi_raspidac3_driver); ++ ++MODULE_AUTHOR("Jan Grulich "); ++MODULE_DESCRIPTION("ASoC Driver for RaspiDAC Rev.3x"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/950-0077-Add-Support-for-JustBoom-Audio-boards.patch b/target/linux/brcm2708/patches-4.9/950-0077-Add-Support-for-JustBoom-Audio-boards.patch new file mode 100644 index 000000000000..96545872f1eb --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0077-Add-Support-for-JustBoom-Audio-boards.patch @@ -0,0 +1,446 @@ +From 4a8ebf575ea143c14fd815ecd1f5398b6a6aee67 Mon Sep 17 00:00:00 2001 +From: Aaron Shaw +Date: Thu, 7 Apr 2016 21:26:21 +0100 +Subject: [PATCH] Add Support for JustBoom Audio boards + +justboom-dac: Adjust for ALSA API change + +As of 4.4, snd_soc_limit_volume now takes a struct snd_soc_card * +rather than a struct snd_soc_codec *. + +Signed-off-by: Phil Elwell +--- + sound/soc/bcm/Kconfig | 14 +++ + sound/soc/bcm/Makefile | 4 + + sound/soc/bcm/justboom-dac.c | 162 +++++++++++++++++++++++++++++++ + sound/soc/bcm/justboom-digi.c | 215 ++++++++++++++++++++++++++++++++++++++++++ + 4 files changed, 395 insertions(+) + create mode 100644 sound/soc/bcm/justboom-dac.c + create mode 100644 sound/soc/bcm/justboom-digi.c + +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -59,6 +59,20 @@ config SND_BCM2708_SOC_RPI_PROTO + help + Say Y or M if you want to add support for Audio Codec Board PROTO (WM8731). + ++config SND_BCM2708_SOC_JUSTBOOM_DAC ++ tristate "Support for JustBoom DAC" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM512x ++ help ++ Say Y or M if you want to add support for JustBoom DAC. ++ ++config SND_BCM2708_SOC_JUSTBOOM_DIGI ++ tristate "Support for JustBoom Digi" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_WM8804 ++ help ++ Say Y or M if you want to add support for JustBoom Digi. ++ + config SND_BCM2708_SOC_IQAUDIO_DAC + tristate "Support for IQaudIO-DAC" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -13,6 +13,8 @@ snd-soc-hifiberry-amp-objs := hifiberry_ + snd-soc-hifiberry-dac-objs := hifiberry_dac.o + snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o + snd-soc-hifiberry-digi-objs := hifiberry_digi.o ++snd-soc-justboom-dac-objs := justboom-dac.o ++snd-soc-justboom-digi-objs := justboom-digi.o + snd-soc-rpi-dac-objs := rpi-dac.o + snd-soc-rpi-proto-objs := rpi-proto.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o +@@ -22,6 +24,8 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_A + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o ++obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o ++obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI) += snd-soc-justboom-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o +--- /dev/null ++++ b/sound/soc/bcm/justboom-dac.c +@@ -0,0 +1,162 @@ ++/* ++ * ASoC Driver for JustBoom DAC Raspberry Pi HAT Sound Card ++ * ++ * Author: Milan Neskovic ++ * Copyright 2016 ++ * based on code by Daniel Matuschek ++ * based on code by Florian Meier ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/pcm512x.h" ++ ++static bool digital_gain_0db_limit = true; ++ ++static int snd_rpi_justboom_dac_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, PCM512x_GPIO_EN, 0x08, 0x08); ++ snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_4, 0xf, 0x02); ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x08); ++ ++ if (digital_gain_0db_limit) ++ { ++ int ret; ++ struct snd_soc_card *card = rtd->card; ++ ++ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); ++ } ++ ++ return 0; ++} ++ ++static int snd_rpi_justboom_dac_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ /*return snd_soc_dai_set_bclk_ratio(cpu_dai, 64);*/ ++ unsigned int sample_bits = ++ snd_pcm_format_physical_width(params_format(params)); ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); ++} ++ ++static int snd_rpi_justboom_dac_startup(struct snd_pcm_substream *substream) { ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x08); ++ return 0; ++} ++ ++static void snd_rpi_justboom_dac_shutdown(struct snd_pcm_substream *substream) { ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_justboom_dac_ops = { ++ .hw_params = snd_rpi_justboom_dac_hw_params, ++ .startup = snd_rpi_justboom_dac_startup, ++ .shutdown = snd_rpi_justboom_dac_shutdown, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_justboom_dac_dai[] = { ++{ ++ .name = "JustBoom DAC", ++ .stream_name = "JustBoom DAC HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm512x-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm512x.1-004d", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_justboom_dac_ops, ++ .init = snd_rpi_justboom_dac_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_justboom_dac = { ++ .name = "snd_rpi_justboom_dac", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_justboom_dac_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_justboom_dac_dai), ++}; ++ ++static int snd_rpi_justboom_dac_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_justboom_dac.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_justboom_dac_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ ++ digital_gain_0db_limit = !of_property_read_bool( ++ pdev->dev.of_node, "justboom,24db_digital_gain"); ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_justboom_dac); ++ if (ret) ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_justboom_dac_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_justboom_dac); ++} ++ ++static const struct of_device_id snd_rpi_justboom_dac_of_match[] = { ++ { .compatible = "justboom,justboom-dac", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_justboom_dac_of_match); ++ ++static struct platform_driver snd_rpi_justboom_dac_driver = { ++ .driver = { ++ .name = "snd-rpi-justboom-dac", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_justboom_dac_of_match, ++ }, ++ .probe = snd_rpi_justboom_dac_probe, ++ .remove = snd_rpi_justboom_dac_remove, ++}; ++ ++module_platform_driver(snd_rpi_justboom_dac_driver); ++ ++MODULE_AUTHOR("Milan Neskovic "); ++MODULE_DESCRIPTION("ASoC Driver for JustBoom PI DAC HAT Sound Card"); ++MODULE_LICENSE("GPL v2"); +--- /dev/null ++++ b/sound/soc/bcm/justboom-digi.c +@@ -0,0 +1,215 @@ ++/* ++ * ASoC Driver for JustBoom Raspberry Pi Digi HAT Sound Card ++ * ++ * Author: Milan Neskovic ++ * Copyright 2016 ++ * based on code by Daniel Matuschek ++ * based on code by Florian Meier ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/wm8804.h" ++ ++static int snd_rpi_justboom_digi_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ /* enable TX output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); ++ ++ return 0; ++} ++ ++static int snd_rpi_justboom_digi_startup(struct snd_pcm_substream *substream) { ++ /* turn on digital output */ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x00); ++ return 0; ++} ++ ++static void snd_rpi_justboom_digi_shutdown(struct snd_pcm_substream *substream) { ++ /* turn off output */ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x3c); ++} ++ ++static int snd_rpi_justboom_digi_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ struct snd_soc_codec *codec = rtd->codec; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ int sysclk = 27000000; /* This is fixed on this board */ ++ ++ long mclk_freq=0; ++ int mclk_div=1; ++ int sampling_freq=1; ++ ++ int ret; ++ ++ int samplerate = params_rate(params); ++ ++ if (samplerate<=96000) { ++ mclk_freq=samplerate*256; ++ mclk_div=WM8804_MCLKDIV_256FS; ++ } else { ++ mclk_freq=samplerate*128; ++ mclk_div=WM8804_MCLKDIV_128FS; ++ } ++ ++ switch (samplerate) { ++ case 32000: ++ sampling_freq=0x03; ++ break; ++ case 44100: ++ sampling_freq=0x00; ++ break; ++ case 48000: ++ sampling_freq=0x02; ++ break; ++ case 88200: ++ sampling_freq=0x08; ++ break; ++ case 96000: ++ sampling_freq=0x0a; ++ break; ++ case 176400: ++ sampling_freq=0x0c; ++ break; ++ case 192000: ++ sampling_freq=0x0e; ++ break; ++ default: ++ dev_err(codec->dev, ++ "Failed to set WM8804 SYSCLK, unsupported samplerate %d\n", ++ samplerate); ++ } ++ ++ snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div); ++ snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq); ++ ++ ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL, ++ sysclk, SND_SOC_CLOCK_OUT); ++ if (ret < 0) { ++ dev_err(codec->dev, ++ "Failed to set WM8804 SYSCLK: %d\n", ret); ++ return ret; ++ } ++ ++ /* Enable TX output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); ++ ++ /* Power on */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x9, 0); ++ ++ /* set sampling frequency status bits */ ++ snd_soc_update_bits(codec, WM8804_SPDTX4, 0x0f, sampling_freq); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai,64); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_justboom_digi_ops = { ++ .hw_params = snd_rpi_justboom_digi_hw_params, ++ .startup = snd_rpi_justboom_digi_startup, ++ .shutdown = snd_rpi_justboom_digi_shutdown, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_justboom_digi_dai[] = { ++{ ++ .name = "JustBoom Digi", ++ .stream_name = "JustBoom Digi HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "wm8804-spdif", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "wm8804.1-003b", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM, ++ .ops = &snd_rpi_justboom_digi_ops, ++ .init = snd_rpi_justboom_digi_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_justboom_digi = { ++ .name = "snd_rpi_justboom_digi", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_justboom_digi_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_justboom_digi_dai), ++}; ++ ++static int snd_rpi_justboom_digi_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_justboom_digi.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_justboom_digi_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_justboom_digi); ++ if (ret) ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_justboom_digi_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_justboom_digi); ++} ++ ++static const struct of_device_id snd_rpi_justboom_digi_of_match[] = { ++ { .compatible = "justboom,justboom-digi", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_justboom_digi_of_match); ++ ++static struct platform_driver snd_rpi_justboom_digi_driver = { ++ .driver = { ++ .name = "snd-rpi-justboom-digi", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_justboom_digi_of_match, ++ }, ++ .probe = snd_rpi_justboom_digi_probe, ++ .remove = snd_rpi_justboom_digi_remove, ++}; ++ ++module_platform_driver(snd_rpi_justboom_digi_driver); ++ ++MODULE_AUTHOR("Milan Neskovic "); ++MODULE_DESCRIPTION("ASoC Driver for JustBoom PI Digi HAT Sound Card"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/950-0078-ARM-adau1977-adc-Add-basic-machine-driver-for-adau19.patch b/target/linux/brcm2708/patches-4.9/950-0078-ARM-adau1977-adc-Add-basic-machine-driver-for-adau19.patch new file mode 100644 index 000000000000..1b87b13efd96 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0078-ARM-adau1977-adc-Add-basic-machine-driver-for-adau19.patch @@ -0,0 +1,177 @@ +From 9bbd8a3c8378eac9e605e0f37f4005583e122527 Mon Sep 17 00:00:00 2001 +From: Andrey Grodzovsky +Date: Tue, 3 May 2016 22:10:59 -0400 +Subject: [PATCH] ARM: adau1977-adc: Add basic machine driver for adau1977 + codec driver. + +This commit adds basic support for the codec usage including: Device tree overlay, +binding I2S bus and setting I2S mode, clock source and frequency setting according +to spec. + +Signed-off-by: Andrey Grodzovsky +--- + sound/soc/bcm/Kconfig | 7 +++ + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/adau1977-adc.c | 125 +++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 134 insertions(+) + create mode 100644 sound/soc/bcm/adau1977-adc.c + +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -87,3 +87,10 @@ config SND_BCM2708_SOC_RASPIDAC3 + select SND_SOC_TPA6130A2 + help + Say Y or M if you want to add support for RaspiDAC Rev.3x. ++ ++config SND_BCM2708_SOC_ADAU1977_ADC ++ tristate "Support for ADAU1977 ADC" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_ADAU1977_I2C ++ help ++ Say Y or M if you want to add support for ADAU1977 ADC. +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -9,6 +9,7 @@ snd-soc-cygnus-objs := cygnus-pcm.o cygn + obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-cygnus.o + + # BCM2708 Machine Support ++snd-soc-adau1977-adc-objs := adau1977-adc.o + snd-soc-hifiberry-amp-objs := hifiberry_amp.o + snd-soc-hifiberry-dac-objs := hifiberry_dac.o + snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o +@@ -20,6 +21,7 @@ snd-soc-rpi-proto-objs := rpi-proto.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o + snd-soc-raspidac3-objs := raspidac3.o + ++obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o +--- /dev/null ++++ b/sound/soc/bcm/adau1977-adc.c +@@ -0,0 +1,125 @@ ++/* ++ * ASoC Driver for ADAU1977 ADC ++ * ++ * Author: Andrey Grodzovsky ++ * Copyright 2016 ++ * ++ * This file is based on hifibery_dac driver by Florian Meier. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++enum adau1977_clk_id { ++ ADAU1977_SYSCLK, ++}; ++ ++enum adau1977_sysclk_src { ++ ADAU1977_SYSCLK_SRC_MCLK, ++ ADAU1977_SYSCLK_SRC_LRCLK, ++}; ++ ++static int eval_adau1977_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ int ret; ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ ++ ret = snd_soc_dai_set_tdm_slot(codec_dai, 0, 0, 0, 0); ++ if (ret < 0) ++ return ret; ++ ++ return snd_soc_codec_set_sysclk(rtd->codec, ADAU1977_SYSCLK, ++ ADAU1977_SYSCLK_SRC_MCLK, 11289600, SND_SOC_CLOCK_IN); ++} ++ ++static struct snd_soc_dai_link snd_rpi_adau1977_dai[] = { ++ { ++ .name = "adau1977", ++ .stream_name = "ADAU1977", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "adau1977-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "adau1977.1-0011", ++ .init = eval_adau1977_init, ++ .dai_fmt = SND_SOC_DAIFMT_I2S | ++ SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM, ++ }, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_adau1977_adc = { ++ .name = "snd_rpi_adau1977_adc", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_adau1977_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_adau1977_dai), ++}; ++ ++static int snd_adau1977_adc_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_adau1977_adc.dev = &pdev->dev; ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_rpi_adau1977_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_adau1977_adc); ++ if (ret) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_adau1977_adc_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_adau1977_adc); ++} ++ ++static const struct of_device_id snd_adau1977_adc_of_match[] = { ++ { .compatible = "adi,adau1977-adc", }, ++ {}, ++}; ++ ++MODULE_DEVICE_TABLE(of, snd_adau1977_adc_of_match); ++ ++static struct platform_driver snd_adau1977_adc_driver = { ++ .driver = { ++ .name = "snd-adau1977-adc", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_adau1977_adc_of_match, ++ }, ++ .probe = snd_adau1977_adc_probe, ++ .remove = snd_adau1977_adc_remove, ++}; ++ ++module_platform_driver(snd_adau1977_adc_driver); ++ ++MODULE_AUTHOR("Andrey Grodzovsky "); ++MODULE_DESCRIPTION("ASoC Driver for ADAU1977 ADC"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/950-0079-New-AudioInjector.net-Pi-soundcard-with-low-jitter-a.patch b/target/linux/brcm2708/patches-4.9/950-0079-New-AudioInjector.net-Pi-soundcard-with-low-jitter-a.patch new file mode 100644 index 000000000000..71d4fef697f3 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0079-New-AudioInjector.net-Pi-soundcard-with-low-jitter-a.patch @@ -0,0 +1,246 @@ +From 235989cb582a29be0bea6a7e306f7b839789053c Mon Sep 17 00:00:00 2001 +From: Matt Flax +Date: Mon, 16 May 2016 21:36:31 +1000 +Subject: [PATCH] New AudioInjector.net Pi soundcard with low jitter audio in + and out. + +Contains the sound/soc/bcm ALSA machine driver and necessary alterations to the Kconfig and Makefile. +Adds the dts overlay and updates the Makefile and README. +Updates the relevant defconfig files to enable building for the Raspberry Pi. +Thanks to Phil Elwell (pelwell) for the review, simple-card concepts and discussion. Thanks to Clive Messer for overlay naming suggestions. + +Added support for headphones, microphone and bclk_ratio settings. + +This patch adds headphone and microphone capability to the Audio Injector sound card. The patch also sets the bit clock ratio for use in the bcm2835-i2s driver. The bcm2835-i2s can't handle an 8 kHz sample rate when the bit clock is at 12 MHz because its register is only 10 bits wide which can't represent the ch2 offset of 1508. For that reason, the rate constraint is added. +--- + sound/soc/bcm/Kconfig | 7 ++ + sound/soc/bcm/Makefile | 3 + + sound/soc/bcm/audioinjector-pi-soundcard.c | 193 +++++++++++++++++++++++++++++ + 3 files changed, 203 insertions(+) + create mode 100644 sound/soc/bcm/audioinjector-pi-soundcard.c + +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -94,3 +94,10 @@ config SND_BCM2708_SOC_ADAU1977_ADC + select SND_SOC_ADAU1977_I2C + help + Say Y or M if you want to add support for ADAU1977 ADC. ++ ++config SND_AUDIOINJECTOR_PI_SOUNDCARD ++ tristate "Support for audioinjector.net Pi add on soundcard" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_WM8731 ++ help ++ Say Y or M if you want to add support for audioinjector.net Pi Hat +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -20,6 +20,7 @@ snd-soc-rpi-dac-objs := rpi-dac.o + snd-soc-rpi-proto-objs := rpi-proto.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o + snd-soc-raspidac3-objs := raspidac3.o ++snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o + + obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o +@@ -32,3 +33,5 @@ obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += + obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o ++obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o ++ +--- /dev/null ++++ b/sound/soc/bcm/audioinjector-pi-soundcard.c +@@ -0,0 +1,193 @@ ++/* ++ * ASoC Driver for AudioInjector Pi add on soundcard ++ * ++ * Created on: 13-May-2016 ++ * Author: flatmax@flatmax.org ++ * based on code by Cliff Cai for the ssm2602 machine blackfin. ++ * with help from Lars-Peter Clausen for simplifying the original code to use the dai_fmt field. ++ * i2s_node code taken from the other sound/soc/bcm machine drivers. ++ * ++ * Copyright (C) 2016 Flatmax Pty. Ltd. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "../codecs/wm8731.h" ++ ++static const unsigned int bcm2835_rates_12000000[] = { ++ 8000, 16000, 32000, 44100, 48000, 96000, 88200, ++}; ++ ++static struct snd_pcm_hw_constraint_list bcm2835_constraints_12000000 = { ++ .list = bcm2835_rates_12000000, ++ .count = ARRAY_SIZE(bcm2835_rates_12000000), ++}; ++ ++static int snd_audioinjector_pi_soundcard_startup(struct snd_pcm_substream *substream) ++{ ++ /* Setup constraints, because there is a 12 MHz XTAL on the board */ ++ snd_pcm_hw_constraint_list(substream->runtime, 0, ++ SNDRV_PCM_HW_PARAM_RATE, ++ &bcm2835_constraints_12000000); ++ return 0; ++} ++ ++static int snd_audioinjector_pi_soundcard_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ switch (params_rate(params)){ ++ case 8000: ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 1); ++ case 16000: ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 750); ++ case 32000: ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 375); ++ case 44100: ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 272); ++ case 48000: ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 250); ++ case 88200: ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 136); ++ case 96000: ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 125); ++ default: ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 125); ++ } ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_audioinjector_pi_soundcard_ops = { ++ .startup = snd_audioinjector_pi_soundcard_startup, ++ .hw_params = snd_audioinjector_pi_soundcard_hw_params, ++}; ++ ++static int audioinjector_pi_soundcard_dai_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ return snd_soc_dai_set_sysclk(rtd->codec_dai, WM8731_SYSCLK_XTAL, 12000000, SND_SOC_CLOCK_IN); ++} ++ ++static struct snd_soc_dai_link audioinjector_pi_soundcard_dai[] = { ++ { ++ .name = "AudioInjector audio", ++ .stream_name = "AudioInjector audio", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "wm8731-hifi", ++ .platform_name = "bcm2835-i2s.0", ++ .codec_name = "wm8731.1-001a", ++ .ops = &snd_audioinjector_pi_soundcard_ops, ++ .init = audioinjector_pi_soundcard_dai_init, ++ .dai_fmt = SND_SOC_DAIFMT_CBM_CFM|SND_SOC_DAIFMT_I2S|SND_SOC_DAIFMT_NB_NF, ++ }, ++}; ++ ++static const struct snd_soc_dapm_widget wm8731_dapm_widgets[] = { ++ SND_SOC_DAPM_HP("Headphone Jack", NULL), ++ SND_SOC_DAPM_SPK("Ext Spk", NULL), ++ SND_SOC_DAPM_LINE("Line In Jacks", NULL), ++ SND_SOC_DAPM_MIC("Microphone", NULL), ++}; ++ ++static const struct snd_soc_dapm_route audioinjector_audio_map[] = { ++ /* headphone connected to LHPOUT, RHPOUT */ ++ {"Headphone Jack", NULL, "LHPOUT"}, ++ {"Headphone Jack", NULL, "RHPOUT"}, ++ ++ /* speaker connected to LOUT, ROUT */ ++ {"Ext Spk", NULL, "ROUT"}, ++ {"Ext Spk", NULL, "LOUT"}, ++ ++ /* line inputs */ ++ {"Line In Jacks", NULL, "Line Input"}, ++ ++ /* mic is connected to Mic Jack, with WM8731 Mic Bias */ ++ {"Microphone", NULL, "Mic Bias"}, ++}; ++ ++static struct snd_soc_card snd_soc_audioinjector = { ++ .name = "audioinjector-pi-soundcard", ++ .dai_link = audioinjector_pi_soundcard_dai, ++ .num_links = ARRAY_SIZE(audioinjector_pi_soundcard_dai), ++ ++ .dapm_widgets = wm8731_dapm_widgets, ++ .num_dapm_widgets = ARRAY_SIZE(wm8731_dapm_widgets), ++ .dapm_routes = audioinjector_audio_map, ++ .num_dapm_routes = ARRAY_SIZE(audioinjector_audio_map), ++}; ++ ++static int audioinjector_pi_soundcard_probe(struct platform_device *pdev) ++{ ++ struct snd_soc_card *card = &snd_soc_audioinjector; ++ int ret; ++ ++ card->dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct snd_soc_dai_link *dai = &audioinjector_pi_soundcard_dai[0]; ++ struct device_node *i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } else ++ if (!dai->cpu_of_node) { ++ dev_err(&pdev->dev, "Property 'i2s-controller' missing or invalid\n"); ++ return -EINVAL; ++ } ++ } ++ ++ if ((ret = snd_soc_register_card(card))) { ++ dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret); ++ } ++ return ret; ++} ++ ++static int audioinjector_pi_soundcard_remove(struct platform_device *pdev) ++{ ++ struct snd_soc_card *card = platform_get_drvdata(pdev); ++ return snd_soc_unregister_card(card); ++ ++} ++ ++static const struct of_device_id audioinjector_pi_soundcard_of_match[] = { ++ { .compatible = "ai,audioinjector-pi-soundcard", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, audioinjector_pi_soundcard_of_match); ++ ++static struct platform_driver audioinjector_pi_soundcard_driver = { ++ .driver = { ++ .name = "audioinjector-audio", ++ .owner = THIS_MODULE, ++ .of_match_table = audioinjector_pi_soundcard_of_match, ++ }, ++ .probe = audioinjector_pi_soundcard_probe, ++ .remove = audioinjector_pi_soundcard_remove, ++}; ++ ++module_platform_driver(audioinjector_pi_soundcard_driver); ++MODULE_AUTHOR("Matt Flax "); ++MODULE_DESCRIPTION("AudioInjector.net Pi Soundcard"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:audioinjector-pi-soundcard"); ++ diff --git a/target/linux/brcm2708/patches-4.9/950-0080-Add-IQAudIO-Digi-WM8804-board-support.patch b/target/linux/brcm2708/patches-4.9/950-0080-Add-IQAudIO-Digi-WM8804-board-support.patch new file mode 100644 index 000000000000..f6a23f91f4bf --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0080-Add-IQAudIO-Digi-WM8804-board-support.patch @@ -0,0 +1,295 @@ +From 5d70e6012f390d6292ea8017cebb947a003fce00 Mon Sep 17 00:00:00 2001 +From: DigitalDreamtime +Date: Thu, 30 Jun 2016 18:38:42 +0100 +Subject: [PATCH] Add IQAudIO Digi WM8804 board support + +Support IQAudIO Digi board with iqaudio_digi machine driver and + iqaudio-digi-wm8804-audio overlay. + +NB. Machine driver is a cut and paste of hifiberry_digi code, with format + and general cleanup to comply with kernel coding standards. + +Signed-off-by: DigitalDreamtime +--- + sound/soc/bcm/Kconfig | 7 ++ + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/iqaudio_digi.c | 239 +++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 248 insertions(+) + create mode 100644 sound/soc/bcm/iqaudio_digi.c + +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -80,6 +80,13 @@ config SND_BCM2708_SOC_IQAUDIO_DAC + help + Say Y or M if you want to add support for IQaudIO-DAC. + ++config SND_BCM2708_SOC_IQAUDIO_DIGI ++ tristate "Support for IQAudIO Digi" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_WM8804 ++ help ++ Say Y or M if you want to add support for IQAudIO Digital IO board. ++ + config SND_BCM2708_SOC_RASPIDAC3 + tristate "Support for RaspiDAC Rev.3x" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -19,6 +19,7 @@ snd-soc-justboom-digi-objs := justboom-d + snd-soc-rpi-dac-objs := rpi-dac.o + snd-soc-rpi-proto-objs := rpi-proto.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o ++snd-soc-iqaudio-digi-objs := iqaudio_digi.o + snd-soc-raspidac3-objs := raspidac3.o + snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o + +@@ -32,6 +33,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DI + obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o ++obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI) += snd-soc-iqaudio-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o + obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o + +--- /dev/null ++++ b/sound/soc/bcm/iqaudio_digi.c +@@ -0,0 +1,239 @@ ++/* ++ * ASoC Driver for IQAudIO WM8804 Digi ++ * ++ * Author: Daniel Matuschek ++ * based on the HifiBerry DAC driver by Florian Meier ++ * Copyright 2013 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/wm8804.h" ++ ++static short int auto_shutdown_output; ++module_param(auto_shutdown_output, short, ++ S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP); ++MODULE_PARM_DESC(auto_shutdown_output, "Shutdown SP/DIF output if playback is stopped"); ++ ++static int snd_rpi_iqaudio_digi_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ /* enable TX output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); ++ ++ return 0; ++} ++ ++static int snd_rpi_iqaudio_digi_startup(struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ /* turn on digital output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x00); ++ ++ return 0; ++} ++ ++static void snd_rpi_iqaudio_digi_shutdown(struct snd_pcm_substream *substream) ++{ ++ if (auto_shutdown_output) { ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ /* turn off digital output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x3c); ++ } ++} ++ ++ ++static int snd_rpi_iqaudio_digi_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ struct snd_soc_codec *codec = rtd->codec; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ int sysclk = 27000000; /* This is fixed on this board */ ++ ++ long mclk_freq = 0; ++ int mclk_div = 1; ++ int sampling_freq = 1; ++ ++ int ret; ++ ++ int samplerate = params_rate(params); ++ ++ if (samplerate <= 96000) { ++ mclk_freq = samplerate * 256; ++ mclk_div = WM8804_MCLKDIV_256FS; ++ } else { ++ mclk_freq = samplerate * 128; ++ mclk_div = WM8804_MCLKDIV_128FS; ++ } ++ ++ switch (samplerate) { ++ case 32000: ++ sampling_freq = 0x03; ++ break; ++ case 44100: ++ sampling_freq = 0x00; ++ break; ++ case 48000: ++ sampling_freq = 0x02; ++ break; ++ case 88200: ++ sampling_freq = 0x08; ++ break; ++ case 96000: ++ sampling_freq = 0x0a; ++ break; ++ case 176400: ++ sampling_freq = 0x0c; ++ break; ++ case 192000: ++ sampling_freq = 0x0e; ++ break; ++ default: ++ dev_err(codec->dev, "Failed to set WM8804 SYSCLK, unsupported samplerate %d\n", ++ samplerate); ++ } ++ ++ snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div); ++ snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq); ++ ++ ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL, ++ sysclk, SND_SOC_CLOCK_OUT); ++ if (ret < 0) { ++ dev_err(codec->dev, "Failed to set WM8804 SYSCLK: %d\n", ret); ++ return ret; ++ } ++ ++ /* Enable TX output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); ++ ++ /* Power on */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x9, 0); ++ ++ /* set sampling frequency status bits */ ++ snd_soc_update_bits(codec, WM8804_SPDTX4, 0x0f, sampling_freq); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 64); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_iqaudio_digi_ops = { ++ .hw_params = snd_rpi_iqaudio_digi_hw_params, ++ .startup = snd_rpi_iqaudio_digi_startup, ++ .shutdown = snd_rpi_iqaudio_digi_shutdown, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_iqaudio_digi_dai[] = { ++{ ++ .name = "IQAudIO Digi", ++ .stream_name = "IQAudIO Digi HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "wm8804-spdif", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "wm8804.1-003b", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | ++ SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM, ++ .ops = &snd_rpi_iqaudio_digi_ops, ++ .init = snd_rpi_iqaudio_digi_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_iqaudio_digi = { ++ .name = "IQAudIODigi", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_iqaudio_digi_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_iqaudio_digi_dai), ++}; ++ ++static int snd_rpi_iqaudio_digi_probe(struct platform_device *pdev) ++{ ++ struct snd_soc_card *card = &snd_rpi_iqaudio_digi; ++ char *prefix = "wm8804-digi,"; ++ char prop[128]; ++ struct device_node *np; ++ int ret = 0; ++ ++ snd_rpi_iqaudio_digi.dev = &pdev->dev; ++ ++ np = pdev->dev.of_node; ++ if (np) { ++ struct snd_soc_dai_link *dai = &snd_rpi_iqaudio_digi_dai[0]; ++ struct device_node *i2s_node; ++ ++ i2s_node = of_parse_phandle(np, "i2s-controller", 0); ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ ++ snprintf(prop, sizeof(prop), "%scard-name", prefix); ++ of_property_read_string(np, prop, &card->name); ++ ++ snprintf(prop, sizeof(prop), "%sdai-name", prefix); ++ of_property_read_string(np, prop, &dai->name); ++ ++ snprintf(prop, sizeof(prop), "%sdai-stream-name", prefix); ++ of_property_read_string(np, prop, &dai->stream_name); ++ } ++ ++ ret = snd_soc_register_card(card); ++ if (ret) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ++ ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_iqaudio_digi_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_iqaudio_digi); ++} ++ ++static const struct of_device_id snd_rpi_iqaudio_digi_of_match[] = { ++ { .compatible = "iqaudio,wm8804-digi", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_iqaudio_digi_of_match); ++ ++static struct platform_driver snd_rpi_iqaudio_digi_driver = { ++ .driver = { ++ .name = "IQAudIODigi", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_iqaudio_digi_of_match, ++ }, ++ .probe = snd_rpi_iqaudio_digi_probe, ++ .remove = snd_rpi_iqaudio_digi_remove, ++}; ++ ++module_platform_driver(snd_rpi_iqaudio_digi_driver); ++ ++MODULE_AUTHOR("Daniel Matuschek "); ++MODULE_DESCRIPTION("ASoC Driver for IQAudIO WM8804 Digi"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/950-0081-New-driver-for-RRA-DigiDAC1-soundcard-using-WM8741-W.patch b/target/linux/brcm2708/patches-4.9/950-0081-New-driver-for-RRA-DigiDAC1-soundcard-using-WM8741-W.patch new file mode 100644 index 000000000000..45a5a379be2b --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0081-New-driver-for-RRA-DigiDAC1-soundcard-using-WM8741-W.patch @@ -0,0 +1,467 @@ +From e5d85d533e7ea8fd5c68d4601ff2b8034bc4aaa9 Mon Sep 17 00:00:00 2001 +From: escalator2015 +Date: Tue, 24 May 2016 16:20:09 +0100 +Subject: [PATCH] New driver for RRA DigiDAC1 soundcard using WM8741 + WM8804 + +--- + sound/soc/bcm/Kconfig | 8 + + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/digidac1-soundcard.c | 422 +++++++++++++++++++++++++++++++++++++ + 3 files changed, 432 insertions(+) + create mode 100644 sound/soc/bcm/digidac1-soundcard.c + +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -108,3 +108,11 @@ config SND_AUDIOINJECTOR_PI_SOUNDCARD + select SND_SOC_WM8731 + help + Say Y or M if you want to add support for audioinjector.net Pi Hat ++ ++config SND_DIGIDAC1_SOUNDCARD ++ tristate "Support for Red Rocks Audio DigiDAC1" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_WM8804 ++ select SND_SOC_WM8741 ++ help ++ Say Y or M if you want to add support for Red Rocks Audio DigiDAC1 board. +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -22,6 +22,7 @@ snd-soc-iqaudio-dac-objs := iqaudio-dac. + snd-soc-iqaudio-digi-objs := iqaudio_digi.o + snd-soc-raspidac3-objs := raspidac3.o + snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o ++snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o + + obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o +@@ -36,4 +37,5 @@ obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI) += snd-soc-iqaudio-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o + obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o ++obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o + +--- /dev/null ++++ b/sound/soc/bcm/digidac1-soundcard.c +@@ -0,0 +1,422 @@ ++/* ++ * ASoC Driver for RRA DigiDAC1 ++ * Copyright 2016 ++ * Author: José M. Tasende ++ * based on the HifiBerry DAC driver by Florian Meier ++ * and the Wolfson card driver by Nikesh Oswal, ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/wm8804.h" ++#include "../codecs/wm8741.h" ++ ++#define WM8741_NUM_SUPPLIES 2 ++ ++/* codec private data */ ++struct wm8741_priv { ++ struct wm8741_platform_data pdata; ++ struct regmap *regmap; ++ struct regulator_bulk_data supplies[WM8741_NUM_SUPPLIES]; ++ unsigned int sysclk; ++ const struct snd_pcm_hw_constraint_list *sysclk_constraints; ++}; ++ ++static int samplerate = 44100; ++ ++/* New Alsa Controls not exposed by original wm8741 codec driver */ ++/* in actual driver the att. adjustment is wrong because */ ++/* this DAC has a coarse attenuation register with 4dB steps */ ++/* and a fine level register with 0.125dB steps */ ++/* each register has 32 steps so combining both we have 1024 steps */ ++/* of 0.125 dB. */ ++/* The original level controls from driver are removed at startup */ ++/* and replaced by the corrected ones. */ ++/* The same wm8741 driver can be used for wm8741 and wm8742 devices */ ++ ++static const DECLARE_TLV_DB_SCALE(dac_tlv_fine, 0, 13, 0); ++static const DECLARE_TLV_DB_SCALE(dac_tlv_coarse, -12700, 400, 1); ++static const char *w8741_dither[4] = {"Off", "RPDF", "TPDF", "HPDF"}; ++static const char *w8741_filter[5] = { ++ "Type 1", "Type 2", "Type 3", "Type 4", "Type 5"}; ++static const char *w8741_switch[2] = {"Off", "On"}; ++static const struct soc_enum w8741_enum[] = { ++SOC_ENUM_SINGLE(WM8741_MODE_CONTROL_2, 0, 4, w8741_dither),/* dithering type */ ++SOC_ENUM_SINGLE(WM8741_FILTER_CONTROL, 0, 5, w8741_filter),/* filter type */ ++SOC_ENUM_SINGLE(WM8741_FORMAT_CONTROL, 6, 2, w8741_switch),/* phase invert */ ++SOC_ENUM_SINGLE(WM8741_VOLUME_CONTROL, 0, 2, w8741_switch),/* volume ramp */ ++SOC_ENUM_SINGLE(WM8741_VOLUME_CONTROL, 3, 2, w8741_switch),/* soft mute */ ++}; ++ ++static const struct snd_kcontrol_new w8741_snd_controls_stereo[] = { ++SOC_DOUBLE_R_TLV("DAC Fine Playback Volume", WM8741_DACLLSB_ATTENUATION, ++ WM8741_DACRLSB_ATTENUATION, 0, 31, 1, dac_tlv_fine), ++SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8741_DACLMSB_ATTENUATION, ++ WM8741_DACRMSB_ATTENUATION, 0, 31, 1, dac_tlv_coarse), ++SOC_ENUM("DAC Dither", w8741_enum[0]), ++SOC_ENUM("DAC Digital Filter", w8741_enum[1]), ++SOC_ENUM("DAC Phase Invert", w8741_enum[2]), ++SOC_ENUM("DAC Volume Ramp", w8741_enum[3]), ++SOC_ENUM("DAC Soft Mute", w8741_enum[4]), ++}; ++ ++static const struct snd_kcontrol_new w8741_snd_controls_mono_left[] = { ++SOC_SINGLE_TLV("DAC Fine Playback Volume", WM8741_DACLLSB_ATTENUATION, ++ 0, 31, 0, dac_tlv_fine), ++SOC_SINGLE_TLV("Digital Playback Volume", WM8741_DACLMSB_ATTENUATION, ++ 0, 31, 1, dac_tlv_coarse), ++SOC_ENUM("DAC Dither", w8741_enum[0]), ++SOC_ENUM("DAC Digital Filter", w8741_enum[1]), ++SOC_ENUM("DAC Phase Invert", w8741_enum[2]), ++SOC_ENUM("DAC Volume Ramp", w8741_enum[3]), ++SOC_ENUM("DAC Soft Mute", w8741_enum[4]), ++}; ++ ++static const struct snd_kcontrol_new w8741_snd_controls_mono_right[] = { ++SOC_SINGLE_TLV("DAC Fine Playback Volume", WM8741_DACRLSB_ATTENUATION, ++ 0, 31, 0, dac_tlv_fine), ++SOC_SINGLE_TLV("Digital Playback Volume", WM8741_DACRMSB_ATTENUATION, ++ 0, 31, 1, dac_tlv_coarse), ++SOC_ENUM("DAC Dither", w8741_enum[0]), ++SOC_ENUM("DAC Digital Filter", w8741_enum[1]), ++SOC_ENUM("DAC Phase Invert", w8741_enum[2]), ++SOC_ENUM("DAC Volume Ramp", w8741_enum[3]), ++SOC_ENUM("DAC Soft Mute", w8741_enum[4]), ++}; ++ ++static int w8741_add_controls(struct snd_soc_codec *codec) ++{ ++ struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec); ++ ++ switch (wm8741->pdata.diff_mode) { ++ case WM8741_DIFF_MODE_STEREO: ++ case WM8741_DIFF_MODE_STEREO_REVERSED: ++ snd_soc_add_codec_controls(codec, ++ w8741_snd_controls_stereo, ++ ARRAY_SIZE(w8741_snd_controls_stereo)); ++ break; ++ case WM8741_DIFF_MODE_MONO_LEFT: ++ snd_soc_add_codec_controls(codec, ++ w8741_snd_controls_mono_left, ++ ARRAY_SIZE(w8741_snd_controls_mono_left)); ++ break; ++ case WM8741_DIFF_MODE_MONO_RIGHT: ++ snd_soc_add_codec_controls(codec, ++ w8741_snd_controls_mono_right, ++ ARRAY_SIZE(w8741_snd_controls_mono_right)); ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int digidac1_soundcard_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_codec *codec = rtd->codec; ++ struct snd_soc_card *card = rtd->card; ++ struct snd_soc_pcm_runtime *wm8741_rtd; ++ struct snd_soc_codec *wm8741_codec; ++ struct snd_card *sound_card = card->snd_card; ++ struct snd_kcontrol *kctl; ++ int ret; ++ ++ wm8741_rtd = snd_soc_get_pcm_runtime(card, card->dai_link[1].name); ++ if (!wm8741_rtd) { ++ dev_warn(card->dev, "digidac1_soundcard_init: couldn't get wm8741 rtd\n"); ++ return -EFAULT; ++ } ++ wm8741_codec = wm8741_rtd->codec; ++ ret = w8741_add_controls(wm8741_codec); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to add new wm8741 controls: %d\n", ++ ret); ++ ++ /* enable TX output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); ++ ++ kctl = snd_soc_card_get_kcontrol(card, ++ "Playback Volume"); ++ if (kctl) { ++ kctl->vd[0].access = SNDRV_CTL_ELEM_ACCESS_READWRITE; ++ snd_ctl_remove(sound_card, kctl); ++ } ++ kctl = snd_soc_card_get_kcontrol(card, ++ "Fine Playback Volume"); ++ if (kctl) { ++ kctl->vd[0].access = SNDRV_CTL_ELEM_ACCESS_READWRITE; ++ snd_ctl_remove(sound_card, kctl); ++ } ++ return 0; ++} ++ ++static int digidac1_soundcard_startup(struct snd_pcm_substream *substream) ++{ ++ /* turn on wm8804 digital output */ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ struct snd_soc_card *card = rtd->card; ++ struct snd_soc_pcm_runtime *wm8741_rtd; ++ struct snd_soc_codec *wm8741_codec; ++ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x00); ++ wm8741_rtd = snd_soc_get_pcm_runtime(card, card->dai_link[1].name); ++ if (!wm8741_rtd) { ++ dev_warn(card->dev, "digidac1_soundcard_startup: couldn't get WM8741 rtd\n"); ++ return -EFAULT; ++ } ++ wm8741_codec = wm8741_rtd->codec; ++ ++ /* latch wm8741 level */ ++ snd_soc_update_bits(wm8741_codec, WM8741_DACLLSB_ATTENUATION, ++ WM8741_UPDATELL, WM8741_UPDATELL); ++ snd_soc_update_bits(wm8741_codec, WM8741_DACLMSB_ATTENUATION, ++ WM8741_UPDATELM, WM8741_UPDATELM); ++ snd_soc_update_bits(wm8741_codec, WM8741_DACRLSB_ATTENUATION, ++ WM8741_UPDATERL, WM8741_UPDATERL); ++ snd_soc_update_bits(wm8741_codec, WM8741_DACRMSB_ATTENUATION, ++ WM8741_UPDATERM, WM8741_UPDATERM); ++ ++ return 0; ++} ++ ++static void digidac1_soundcard_shutdown(struct snd_pcm_substream *substream) ++{ ++ /* turn off wm8804 digital output */ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x3c, 0x3c); ++} ++ ++static int digidac1_soundcard_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ struct snd_soc_codec *codec = rtd->codec; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ struct snd_soc_card *card = rtd->card; ++ struct snd_soc_pcm_runtime *wm8741_rtd; ++ struct snd_soc_codec *wm8741_codec; ++ ++ int sysclk = 27000000; ++ long mclk_freq = 0; ++ int mclk_div = 1; ++ int sampling_freq = 1; ++ int ret; ++ ++ wm8741_rtd = snd_soc_get_pcm_runtime(card, card->dai_link[1].name); ++ if (!wm8741_rtd) { ++ dev_warn(card->dev, "digidac1_soundcard_hw_params: couldn't get WM8741 rtd\n"); ++ return -EFAULT; ++ } ++ wm8741_codec = wm8741_rtd->codec; ++ samplerate = params_rate(params); ++ ++ if (samplerate <= 96000) { ++ mclk_freq = samplerate*256; ++ mclk_div = WM8804_MCLKDIV_256FS; ++ } else { ++ mclk_freq = samplerate*128; ++ mclk_div = WM8804_MCLKDIV_128FS; ++ } ++ ++ switch (samplerate) { ++ case 32000: ++ sampling_freq = 0x03; ++ break; ++ case 44100: ++ sampling_freq = 0x00; ++ break; ++ case 48000: ++ sampling_freq = 0x02; ++ break; ++ case 88200: ++ sampling_freq = 0x08; ++ break; ++ case 96000: ++ sampling_freq = 0x0a; ++ break; ++ case 176400: ++ sampling_freq = 0x0c; ++ break; ++ case 192000: ++ sampling_freq = 0x0e; ++ break; ++ default: ++ dev_err(codec->dev, ++ "Failed to set WM8804 SYSCLK, unsupported samplerate %d\n", ++ samplerate); ++ } ++ ++ snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div); ++ snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq); ++ ++ ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL, ++ sysclk, SND_SOC_CLOCK_OUT); ++ if (ret < 0) { ++ dev_err(codec->dev, ++ "Failed to set WM8804 SYSCLK: %d\n", ret); ++ return ret; ++ } ++ /* Enable wm8804 TX output */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x4, 0x0); ++ ++ /* wm8804 Power on */ ++ snd_soc_update_bits(codec, WM8804_PWRDN, 0x9, 0); ++ ++ /* wm8804 set sampling frequency status bits */ ++ snd_soc_update_bits(codec, WM8804_SPDTX4, 0x0f, sampling_freq); ++ ++ /* Now update wm8741 registers for the correct oversampling */ ++ if (samplerate <= 48000) ++ snd_soc_update_bits(wm8741_codec, WM8741_MODE_CONTROL_1, ++ WM8741_OSR_MASK, 0x00); ++ else if (samplerate <= 96000) ++ snd_soc_update_bits(wm8741_codec, WM8741_MODE_CONTROL_1, ++ WM8741_OSR_MASK, 0x20); ++ else ++ snd_soc_update_bits(wm8741_codec, WM8741_MODE_CONTROL_1, ++ WM8741_OSR_MASK, 0x40); ++ ++ /* wm8741 bit size */ ++ switch (params_width(params)) { ++ case 16: ++ snd_soc_update_bits(wm8741_codec, WM8741_FORMAT_CONTROL, ++ WM8741_IWL_MASK, 0x00); ++ break; ++ case 20: ++ snd_soc_update_bits(wm8741_codec, WM8741_FORMAT_CONTROL, ++ WM8741_IWL_MASK, 0x01); ++ break; ++ case 24: ++ snd_soc_update_bits(wm8741_codec, WM8741_FORMAT_CONTROL, ++ WM8741_IWL_MASK, 0x02); ++ break; ++ case 32: ++ snd_soc_update_bits(wm8741_codec, WM8741_FORMAT_CONTROL, ++ WM8741_IWL_MASK, 0x03); ++ break; ++ default: ++ dev_dbg(codec->dev, "wm8741_hw_params: Unsupported bit size param = %d", ++ params_width(params)); ++ return -EINVAL; ++ } ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, 64); ++} ++/* machine stream operations */ ++static struct snd_soc_ops digidac1_soundcard_ops = { ++ .hw_params = digidac1_soundcard_hw_params, ++ .startup = digidac1_soundcard_startup, ++ .shutdown = digidac1_soundcard_shutdown, ++}; ++ ++static struct snd_soc_dai_link digidac1_soundcard_dai[] = { ++ { ++ .name = "RRA DigiDAC1", ++ .stream_name = "RRA DigiDAC1 HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "wm8804-spdif", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "wm8804.1-003b", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM, ++ .ops = &digidac1_soundcard_ops, ++ .init = digidac1_soundcard_init, ++ }, ++ { ++ .name = "RRA DigiDAC11", ++ .stream_name = "RRA DigiDAC11 HiFi", ++ .cpu_dai_name = "wm8804-spdif", ++ .codec_dai_name = "wm8741", ++ .codec_name = "wm8741.1-001a", ++ .dai_fmt = SND_SOC_DAIFMT_I2S ++ | SND_SOC_DAIFMT_NB_NF ++ | SND_SOC_DAIFMT_CBS_CFS, ++ }, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card digidac1_soundcard = { ++ .name = "digidac1-soundcard", ++ .owner = THIS_MODULE, ++ .dai_link = digidac1_soundcard_dai, ++ .num_links = ARRAY_SIZE(digidac1_soundcard_dai), ++}; ++ ++static int digidac1_soundcard_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ digidac1_soundcard.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &digidac1_soundcard_dai[0]; ++ ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ } ++ ++ ret = snd_soc_register_card(&digidac1_soundcard); ++ if (ret) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ++ ret); ++ ++ return ret; ++} ++ ++static int digidac1_soundcard_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&digidac1_soundcard); ++} ++ ++static const struct of_device_id digidac1_soundcard_of_match[] = { ++ { .compatible = "rra,digidac1-soundcard", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, digidac1_soundcard_of_match); ++ ++static struct platform_driver digidac1_soundcard_driver = { ++ .driver = { ++ .name = "digidac1-audio", ++ .owner = THIS_MODULE, ++ .of_match_table = digidac1_soundcard_of_match, ++ }, ++ .probe = digidac1_soundcard_probe, ++ .remove = digidac1_soundcard_remove, ++}; ++ ++module_platform_driver(digidac1_soundcard_driver); ++ ++MODULE_AUTHOR("José M. Tasende "); ++MODULE_DESCRIPTION("ASoC Driver for RRA DigiDAC1"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/950-0082-Add-support-for-Dion-Audio-LOCO-DAC-AMP-HAT.patch b/target/linux/brcm2708/patches-4.9/950-0082-Add-support-for-Dion-Audio-LOCO-DAC-AMP-HAT.patch new file mode 100644 index 000000000000..b06cd35b7247 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0082-Add-support-for-Dion-Audio-LOCO-DAC-AMP-HAT.patch @@ -0,0 +1,168 @@ +From 999d3e615247d1921d245f7084194efbc697bb66 Mon Sep 17 00:00:00 2001 +From: DigitalDreamtime +Date: Sat, 2 Jul 2016 16:26:19 +0100 +Subject: [PATCH] Add support for Dion Audio LOCO DAC-AMP HAT + +Using dedicated machine driver and pcm5102a codec driver. + +Signed-off-by: DigitalDreamtime +--- + sound/soc/bcm/Kconfig | 7 +++ + sound/soc/bcm/Makefile | 3 +- + sound/soc/bcm/dionaudio_loco.c | 121 +++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 130 insertions(+), 1 deletion(-) + create mode 100644 sound/soc/bcm/dionaudio_loco.c + +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -116,3 +116,10 @@ config SND_DIGIDAC1_SOUNDCARD + select SND_SOC_WM8741 + help + Say Y or M if you want to add support for Red Rocks Audio DigiDAC1 board. ++ ++config SND_BCM2708_SOC_DIONAUDIO_LOCO ++ tristate "Support for Dion Audio LOCO DAC-AMP" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM5102a ++ help ++ Say Y or M if you want to add support for Dion Audio LOCO. +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -23,6 +23,7 @@ snd-soc-iqaudio-digi-objs := iqaudio_dig + snd-soc-raspidac3-objs := raspidac3.o + snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o + snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o ++snd-soc-dionaudio-loco-objs := dionaudio_loco.o + + obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o +@@ -38,4 +39,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DIG + obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o + obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o + obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o +- ++obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o +--- /dev/null ++++ b/sound/soc/bcm/dionaudio_loco.c +@@ -0,0 +1,121 @@ ++/* ++ * ASoC Driver for Dion Audio LOCO DAC-AMP ++ * ++ * Author: Miquel Blauw ++ * Copyright 2016 ++ * ++ * Based on the software of the RPi-DAC writen by Florian Meier ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++static int snd_rpi_dionaudio_loco_hw_params( ++ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ unsigned int sample_bits = ++ snd_pcm_format_physical_width(params_format(params)); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_dionaudio_loco_ops = { ++ .hw_params = snd_rpi_dionaudio_loco_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_dionaudio_loco_dai[] = { ++{ ++ .name = "DionAudio LOCO", ++ .stream_name = "DionAudio LOCO DAC-AMP", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm5102a-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm5102a-codec", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | ++ SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_dionaudio_loco_ops, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_dionaudio_loco = { ++ .name = "snd_rpi_dionaudio_loco", ++ .dai_link = snd_rpi_dionaudio_loco_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_dionaudio_loco_dai), ++}; ++ ++static int snd_rpi_dionaudio_loco_probe(struct platform_device *pdev) ++{ ++ struct device_node *np; ++ int ret = 0; ++ ++ snd_rpi_dionaudio_loco.dev = &pdev->dev; ++ ++ np = pdev->dev.of_node; ++ if (np) { ++ struct snd_soc_dai_link *dai = &snd_rpi_dionaudio_loco_dai[0]; ++ struct device_node *i2s_np; ++ ++ i2s_np = of_parse_phandle(np, "i2s-controller", 0); ++ if (i2s_np) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_np; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_np; ++ } ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_dionaudio_loco); ++ if (ret) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ++ ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_dionaudio_loco_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_dionaudio_loco); ++} ++ ++static const struct of_device_id snd_rpi_dionaudio_loco_of_match[] = { ++ { .compatible = "dionaudio,loco-pcm5242-tpa3118", }, ++ { /* sentinel */ }, ++}; ++MODULE_DEVICE_TABLE(of, snd_rpi_dionaudio_loco_of_match); ++ ++static struct platform_driver snd_rpi_dionaudio_loco_driver = { ++ .driver = { ++ .name = "snd-dionaudio-loco", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_dionaudio_loco_of_match, ++ }, ++ .probe = snd_rpi_dionaudio_loco_probe, ++ .remove = snd_rpi_dionaudio_loco_remove, ++}; ++ ++module_platform_driver(snd_rpi_dionaudio_loco_driver); ++ ++MODULE_AUTHOR("Miquel Blauw "); ++MODULE_DESCRIPTION("ASoC Driver for DionAudio LOCO"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/950-0083-Allo-Piano-DAC-boards-Initial-2-channel-stereo-suppo.patch b/target/linux/brcm2708/patches-4.9/950-0083-Allo-Piano-DAC-boards-Initial-2-channel-stereo-suppo.patch new file mode 100644 index 000000000000..64e785d2a6a3 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0083-Allo-Piano-DAC-boards-Initial-2-channel-stereo-suppo.patch @@ -0,0 +1,202 @@ +From 779409817cf1af2c38055af64c11e026cb0bb4e9 Mon Sep 17 00:00:00 2001 +From: Clive Messer +Date: Mon, 19 Sep 2016 14:01:04 +0100 +Subject: [PATCH] Allo Piano DAC boards: Initial 2 channel (stereo) support + (#1645) + +Add initial 2 channel (stereo) support for Allo Piano DAC (2.0/2.1) boards, +using allo-piano-dac-pcm512x-audio overlay and allo-piano-dac ALSA ASoC +machine driver. + +NB. The initial support is 2 channel (stereo) ONLY! +(The Piano DAC 2.1 will only support 2 channel (stereo) left/right output, + pending an update to the upstream pcm512x codec driver, which will have + to be submitted via upstream. With the initial downstream support, + provided by this patch, the Piano DAC 2.1 subwoofer outputs will + not function.) + +Signed-off-by: Baswaraj K +Signed-off-by: Clive Messer +Tested-by: Clive Messer +--- + sound/soc/bcm/Kconfig | 7 ++ + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/allo-piano-dac.c | 144 +++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 153 insertions(+) + create mode 100644 sound/soc/bcm/allo-piano-dac.c + +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -123,3 +123,10 @@ config SND_BCM2708_SOC_DIONAUDIO_LOCO + select SND_SOC_PCM5102a + help + Say Y or M if you want to add support for Dion Audio LOCO. ++ ++config SND_BCM2708_SOC_ALLO_PIANO_DAC ++ tristate "Support for Allo Piano DAC" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM512x_I2C ++ help ++ Say Y or M if you want to add support for Allo Piano DAC. +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -24,6 +24,7 @@ snd-soc-raspidac3-objs := raspidac3.o + snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o + snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o + snd-soc-dionaudio-loco-objs := dionaudio_loco.o ++snd-soc-allo-piano-dac-objs := allo-piano-dac.o + + obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o +@@ -40,3 +41,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) + obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o + obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o + obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o ++obj-$(CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC) += snd-soc-allo-piano-dac.o +--- /dev/null ++++ b/sound/soc/bcm/allo-piano-dac.c +@@ -0,0 +1,144 @@ ++/* ++ * ALSA ASoC Machine Driver for Allo Piano DAC ++ * ++ * Author: Baswaraj K ++ * Copyright 2016 ++ * based on code by Daniel Matuschek ++ * based on code by Florian Meier ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++static bool digital_gain_0db_limit = true; ++ ++static int snd_allo_piano_dac_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ if (digital_gain_0db_limit) { ++ int ret; ++ struct snd_soc_card *card = rtd->card; ++ ++ ret = snd_soc_limit_volume(card, "Digital Playback Volume", ++ 207); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to set volume limit: %d\n", ++ ret); ++ } ++ ++ return 0; ++} ++ ++static int snd_allo_piano_dac_hw_params( ++ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ unsigned int sample_bits = ++ snd_pcm_format_physical_width(params_format(params)); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_allo_piano_dac_ops = { ++ .hw_params = snd_allo_piano_dac_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_allo_piano_dac_dai[] = { ++{ ++ .name = "Piano DAC", ++ .stream_name = "Piano DAC HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm512x-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm512x.1-004c", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | ++ SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_allo_piano_dac_ops, ++ .init = snd_allo_piano_dac_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_allo_piano_dac = { ++ .name = "PianoDAC", ++ .owner = THIS_MODULE, ++ .dai_link = snd_allo_piano_dac_dai, ++ .num_links = ARRAY_SIZE(snd_allo_piano_dac_dai), ++}; ++ ++static int snd_allo_piano_dac_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_allo_piano_dac.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai; ++ ++ dai = &snd_allo_piano_dac_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ ++ digital_gain_0db_limit = !of_property_read_bool( ++ pdev->dev.of_node, "allo,24db_digital_gain"); ++ } ++ ++ ret = snd_soc_register_card(&snd_allo_piano_dac); ++ if (ret) ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_allo_piano_dac_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_allo_piano_dac); ++} ++ ++static const struct of_device_id snd_allo_piano_dac_of_match[] = { ++ { .compatible = "allo,piano-dac", }, ++ { /* sentinel */ }, ++}; ++MODULE_DEVICE_TABLE(of, snd_allo_piano_dac_of_match); ++ ++static struct platform_driver snd_allo_piano_dac_driver = { ++ .driver = { ++ .name = "snd-allo-piano-dac", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_allo_piano_dac_of_match, ++ }, ++ .probe = snd_allo_piano_dac_probe, ++ .remove = snd_allo_piano_dac_remove, ++}; ++ ++module_platform_driver(snd_allo_piano_dac_driver); ++ ++MODULE_AUTHOR("Baswaraj K "); ++MODULE_DESCRIPTION("ALSA ASoC Machine Driver for Allo Piano DAC"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/950-0084-Support-for-Blokas-Labs-pisound-board.patch b/target/linux/brcm2708/patches-4.9/950-0084-Support-for-Blokas-Labs-pisound-board.patch new file mode 100644 index 000000000000..21f43347b3f2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0084-Support-for-Blokas-Labs-pisound-board.patch @@ -0,0 +1,1168 @@ +From 7d8efd6f3198fd3dafe5a74003616a2aea5dc6c5 Mon Sep 17 00:00:00 2001 +From: gtrainavicius +Date: Sun, 23 Oct 2016 12:06:53 +0300 +Subject: [PATCH] Support for Blokas Labs pisound board + +Pisound dynamic overlay (#1760) + +Restructuring pisound-overlay.dts, so it can be loaded and unloaded dynamically using dtoverlay. + +Print a logline when the kernel module is removed. +--- + .../devicetree/bindings/vendor-prefixes.txt | 1 + + arch/arm/boot/dts/overlays/pisound-overlay.dts | 94 +- + sound/soc/bcm/Kconfig | 6 + + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/pisound.c | 989 +++++++++++++++++++++ + 5 files changed, 1048 insertions(+), 44 deletions(-) + create mode 100644 sound/soc/bcm/pisound.c + +--- a/Documentation/devicetree/bindings/vendor-prefixes.txt ++++ b/Documentation/devicetree/bindings/vendor-prefixes.txt +@@ -40,6 +40,7 @@ auvidea Auvidea GmbH + avago Avago Technologies + avic Shanghai AVIC Optoelectronics Co., Ltd. + axis Axis Communications AB ++blokaslabs Vilniaus Blokas UAB + boe BOE Technology Group Co., Ltd. + bosch Bosch Sensortec GmbH + boundary Boundary Devices Inc. +--- a/arch/arm/boot/dts/overlays/pisound-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pisound-overlay.dts +@@ -26,6 +26,54 @@ + compatible = "brcm,bcm2708"; + + fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&spi0>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pisound_spi: pisound_spi@0{ ++ compatible = "blokaslabs,pisound-spi"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins>; ++ spi-max-frequency = <1000000>; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "/"; ++ __overlay__ { ++ pcm5102a-codec { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5102a"; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@5 { + target = <&sound>; + __overlay__ { + compatible = "blokaslabs,pisound"; +@@ -49,7 +97,7 @@ + }; + }; + +- fragment@1 { ++ fragment@6 { + target = <&gpio>; + __overlay__ { + pinctrl-names = "default"; +@@ -63,52 +111,10 @@ + }; + }; + +- fragment@2 { ++ fragment@7 { + target = <&i2s>; + __overlay__ { + status = "okay"; + }; + }; +- +- fragment@3 { +- target-path = "/"; +- __overlay__ { +- pcm5102a-codec { +- #sound-dai-cells = <0>; +- compatible = "ti,pcm5102a"; +- status = "okay"; +- }; +- }; +- }; +- +- fragment@4 { +- target = <&spi0>; +- __overlay__ { +- status = "okay"; +- +- spidev@0{ +- status = "disabled"; +- }; +- +- spidev@1{ +- status = "okay"; +- }; +- }; +- }; +- +- fragment@5 { +- target = <&spi0>; +- __overlay__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- pisound_spi: pisound_spi@0{ +- compatible = "blokaslabs,pisound-spi"; +- reg = <0>; +- pinctrl-names = "default"; +- pinctrl-0 = <&spi0_pins>; +- spi-max-frequency = <1000000>; +- }; +- }; +- }; + }; +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -130,3 +130,9 @@ config SND_BCM2708_SOC_ALLO_PIANO_DAC + select SND_SOC_PCM512x_I2C + help + Say Y or M if you want to add support for Allo Piano DAC. ++ ++config SND_PISOUND ++ tristate "Support for Blokas Labs pisound" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ help ++ Say Y or M if you want to add support for Blokas Labs pisound. +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -25,6 +25,7 @@ snd-soc-audioinjector-pi-soundcard-objs + snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o + snd-soc-dionaudio-loco-objs := dionaudio_loco.o + snd-soc-allo-piano-dac-objs := allo-piano-dac.o ++snd-soc-pisound-objs := pisound.o + + obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o +@@ -42,3 +43,4 @@ obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDC + obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o + obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o + obj-$(CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC) += snd-soc-allo-piano-dac.o ++obj-$(CONFIG_SND_PISOUND) += snd-soc-pisound.o +--- /dev/null ++++ b/sound/soc/bcm/pisound.c +@@ -0,0 +1,989 @@ ++/* ++ * pisound Linux kernel module. ++ * Copyright (C) 2016 Vilniaus Blokas UAB, http://blokas.io/pisound ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; version 2 of the ++ * License. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, ++ * MA 02110-1301, USA. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static int pisnd_spi_init(struct device *dev); ++static void pisnd_spi_uninit(void); ++ ++static void pisnd_spi_send(uint8_t val); ++static uint8_t pisnd_spi_recv(uint8_t *buffer, uint8_t length); ++ ++typedef void (*pisnd_spi_recv_cb)(void *data); ++static void pisnd_spi_set_callback(pisnd_spi_recv_cb cb, void *data); ++ ++static const char *pisnd_spi_get_serial(void); ++static const char *pisnd_spi_get_id(void); ++static const char *pisnd_spi_get_version(void); ++ ++static int pisnd_midi_init(struct snd_card *card); ++static void pisnd_midi_uninit(void); ++ ++#define PISOUND_LOG_PREFIX "pisound: " ++ ++#ifdef DEBUG ++# define printd(...) pr_alert(PISOUND_LOG_PREFIX __VA_ARGS__) ++#else ++# define printd(...) do {} while (0) ++#endif ++ ++#define printe(...) pr_err(PISOUND_LOG_PREFIX __VA_ARGS__) ++#define printi(...) pr_info(PISOUND_LOG_PREFIX __VA_ARGS__) ++ ++static int pisnd_output_open(struct snd_rawmidi_substream *substream) ++{ ++ return 0; ++} ++ ++static int pisnd_output_close(struct snd_rawmidi_substream *substream) ++{ ++ return 0; ++} ++ ++static void pisnd_output_trigger( ++ struct snd_rawmidi_substream *substream, ++ int up ++ ) ++{ ++ uint8_t data; ++ ++ if (!up) ++ return; ++ ++ while (snd_rawmidi_transmit_peek(substream, &data, 1)) { ++ pisnd_spi_send(data); ++ snd_rawmidi_transmit_ack(substream, 1); ++ } ++} ++ ++static void pisnd_output_drain(struct snd_rawmidi_substream *substream) ++{ ++ uint8_t data; ++ ++ while (snd_rawmidi_transmit_peek(substream, &data, 1)) { ++ pisnd_spi_send(data); ++ ++ snd_rawmidi_transmit_ack(substream, 1); ++ } ++} ++ ++static int pisnd_input_open(struct snd_rawmidi_substream *substream) ++{ ++ return 0; ++} ++ ++static int pisnd_input_close(struct snd_rawmidi_substream *substream) ++{ ++ return 0; ++} ++ ++static void pisnd_midi_recv_callback(void *substream) ++{ ++ uint8_t data[128]; ++ uint8_t n = 0; ++ ++ while ((n = pisnd_spi_recv(data, sizeof(data)))) { ++ int res = snd_rawmidi_receive(substream, data, n); ++ (void)res; ++ printd("midi recv 0x%02x, res = %d\n", data, res); ++ } ++} ++ ++static void pisnd_input_trigger(struct snd_rawmidi_substream *substream, int up) ++{ ++ if (up) { ++ pisnd_spi_set_callback(pisnd_midi_recv_callback, substream); ++ pisnd_midi_recv_callback(substream); ++ } else { ++ pisnd_spi_set_callback(NULL, NULL); ++ } ++} ++ ++static struct snd_rawmidi *g_rmidi; ++ ++static struct snd_rawmidi_ops pisnd_output_ops = { ++ .open = pisnd_output_open, ++ .close = pisnd_output_close, ++ .trigger = pisnd_output_trigger, ++ .drain = pisnd_output_drain, ++}; ++ ++static struct snd_rawmidi_ops pisnd_input_ops = { ++ .open = pisnd_input_open, ++ .close = pisnd_input_close, ++ .trigger = pisnd_input_trigger, ++}; ++ ++static void pisnd_get_port_info( ++ struct snd_rawmidi *rmidi, ++ int number, ++ struct snd_seq_port_info *seq_port_info ++ ) ++{ ++ seq_port_info->type = ++ SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC | ++ SNDRV_SEQ_PORT_TYPE_HARDWARE | ++ SNDRV_SEQ_PORT_TYPE_PORT; ++ seq_port_info->midi_voices = 0; ++} ++ ++static struct snd_rawmidi_global_ops pisnd_global_ops = { ++ .get_port_info = pisnd_get_port_info, ++}; ++ ++static int pisnd_midi_init(struct snd_card *card) ++{ ++ int err = snd_rawmidi_new(card, "pisound MIDI", 0, 1, 1, &g_rmidi); ++ ++ if (err < 0) { ++ printe("snd_rawmidi_new failed: %d\n", err); ++ return err; ++ } ++ ++ strcpy(g_rmidi->name, "pisound MIDI "); ++ strcat(g_rmidi->name, pisnd_spi_get_serial()); ++ ++ g_rmidi->info_flags = ++ SNDRV_RAWMIDI_INFO_OUTPUT | ++ SNDRV_RAWMIDI_INFO_INPUT | ++ SNDRV_RAWMIDI_INFO_DUPLEX; ++ ++ g_rmidi->ops = &pisnd_global_ops; ++ ++ g_rmidi->private_data = (void *)0; ++ ++ snd_rawmidi_set_ops( ++ g_rmidi, ++ SNDRV_RAWMIDI_STREAM_OUTPUT, ++ &pisnd_output_ops ++ ); ++ ++ snd_rawmidi_set_ops( ++ g_rmidi, ++ SNDRV_RAWMIDI_STREAM_INPUT, ++ &pisnd_input_ops ++ ); ++ ++ return 0; ++} ++ ++static void pisnd_midi_uninit(void) ++{ ++} ++ ++static void *g_recvData; ++static pisnd_spi_recv_cb g_recvCallback; ++ ++#define FIFO_SIZE 512 ++ ++static char g_serial_num[11]; ++static char g_id[25]; ++static char g_version[5]; ++ ++DEFINE_KFIFO(spi_fifo_in, uint8_t, FIFO_SIZE); ++DEFINE_KFIFO(spi_fifo_out, uint8_t, FIFO_SIZE); ++ ++static struct gpio_desc *data_available; ++static struct gpio_desc *spi_reset; ++ ++static struct spi_device *pisnd_spi_device; ++ ++static struct workqueue_struct *pisnd_workqueue; ++static struct work_struct pisnd_work_process; ++ ++static void pisnd_work_handler(struct work_struct *work); ++ ++static uint16_t spi_transfer16(uint16_t val); ++ ++static int pisnd_init_workqueues(void) ++{ ++ pisnd_workqueue = create_singlethread_workqueue("pisnd_workqueue"); ++ INIT_WORK(&pisnd_work_process, pisnd_work_handler); ++ ++ return 0; ++} ++ ++static void pisnd_uninit_workqueues(void) ++{ ++ flush_workqueue(pisnd_workqueue); ++ destroy_workqueue(pisnd_workqueue); ++ ++ pisnd_workqueue = NULL; ++} ++ ++static bool pisnd_spi_has_more(void) ++{ ++ return gpiod_get_value(data_available); ++} ++ ++enum task_e { ++ TASK_PROCESS = 0, ++}; ++ ++static void pisnd_schedule_process(enum task_e task) ++{ ++ if (pisnd_spi_device != NULL && ++ pisnd_workqueue != NULL && ++ !work_pending(&pisnd_work_process) ++ ) { ++ printd("schedule: has more = %d\n", pisnd_spi_has_more()); ++ if (task == TASK_PROCESS) ++ queue_work(pisnd_workqueue, &pisnd_work_process); ++ } ++} ++ ++static irqreturn_t data_available_interrupt_handler(int irq, void *dev_id) ++{ ++ if (irq == gpiod_to_irq(data_available) && pisnd_spi_has_more()) { ++ printd("schedule from irq\n"); ++ pisnd_schedule_process(TASK_PROCESS); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++static DEFINE_SPINLOCK(spilock); ++static unsigned long spilockflags; ++ ++static uint16_t spi_transfer16(uint16_t val) ++{ ++ int err; ++ struct spi_transfer transfer; ++ struct spi_message msg; ++ uint8_t txbuf[2]; ++ uint8_t rxbuf[2]; ++ ++ if (!pisnd_spi_device) { ++ printe("pisnd_spi_device null, returning\n"); ++ return 0; ++ } ++ ++ spi_message_init(&msg); ++ ++ memset(&transfer, 0, sizeof(transfer)); ++ memset(&rxbuf, 0, sizeof(rxbuf)); ++ ++ txbuf[0] = val >> 8; ++ txbuf[1] = val & 0xff; ++ ++ transfer.tx_buf = &txbuf; ++ transfer.rx_buf = &rxbuf; ++ transfer.len = sizeof(txbuf); ++ transfer.speed_hz = 125000; ++ transfer.delay_usecs = 100; ++ spi_message_add_tail(&transfer, &msg); ++ ++ spin_lock_irqsave(&spilock, spilockflags); ++ err = spi_sync(pisnd_spi_device, &msg); ++ spin_unlock_irqrestore(&spilock, spilockflags); ++ ++ if (err < 0) { ++ printe("spi_sync error %d\n", err); ++ return 0; ++ } ++ ++ printd("received: %02x%02x\n", rxbuf[0], rxbuf[1]); ++ printd("hasMore %d\n", pisnd_spi_has_more()); ++ ++ return (rxbuf[0] << 8) | rxbuf[1]; ++} ++ ++static int spi_read_bytes(char *dst, size_t length, uint8_t *bytesRead) ++{ ++ uint16_t rx; ++ uint8_t size; ++ uint8_t i; ++ ++ memset(dst, 0, length); ++ *bytesRead = 0; ++ ++ rx = spi_transfer16(0); ++ if (!(rx >> 8)) ++ return -EINVAL; ++ ++ size = rx & 0xff; ++ ++ if (size > length) ++ return -EINVAL; ++ ++ for (i = 0; i < size; ++i) { ++ rx = spi_transfer16(0); ++ if (!(rx >> 8)) ++ return -EINVAL; ++ ++ dst[i] = rx & 0xff; ++ } ++ ++ *bytesRead = i; ++ ++ return 0; ++} ++ ++static int spi_device_match(struct device *dev, void *data) ++{ ++ struct spi_device *spi = container_of(dev, struct spi_device, dev); ++ ++ printd(" %s %s %dkHz %d bits mode=0x%02X\n", ++ spi->modalias, dev_name(dev), spi->max_speed_hz/1000, ++ spi->bits_per_word, spi->mode); ++ ++ if (strcmp("pisound-spi", spi->modalias) == 0) { ++ printi("\tFound!\n"); ++ return 1; ++ } ++ ++ printe("\tNot found!\n"); ++ return 0; ++} ++ ++static struct spi_device *pisnd_spi_find_device(void) ++{ ++ struct device *dev; ++ ++ printi("Searching for spi device...\n"); ++ dev = bus_find_device(&spi_bus_type, NULL, NULL, spi_device_match); ++ if (dev != NULL) ++ return container_of(dev, struct spi_device, dev); ++ else ++ return NULL; ++} ++ ++static void pisnd_work_handler(struct work_struct *work) ++{ ++ uint16_t rx; ++ uint16_t tx; ++ uint8_t val; ++ ++ if (work == &pisnd_work_process) { ++ if (pisnd_spi_device == NULL) ++ return; ++ ++ do { ++ val = 0; ++ tx = 0; ++ ++ if (kfifo_get(&spi_fifo_out, &val)) ++ tx = 0x0f00 | val; ++ ++ rx = spi_transfer16(tx); ++ ++ if (rx & 0xff00) { ++ kfifo_put(&spi_fifo_in, rx & 0xff); ++ if (kfifo_len(&spi_fifo_in) > 16 ++ && g_recvCallback) ++ g_recvCallback(g_recvData); ++ } ++ } while (rx != 0 ++ || !kfifo_is_empty(&spi_fifo_out) ++ || pisnd_spi_has_more() ++ ); ++ ++ if (!kfifo_is_empty(&spi_fifo_in) && g_recvCallback) ++ g_recvCallback(g_recvData); ++ } ++} ++ ++static int pisnd_spi_gpio_init(struct device *dev) ++{ ++ spi_reset = gpiod_get_index(dev, "reset", 1, GPIOD_ASIS); ++ data_available = gpiod_get_index(dev, "data_available", 0, GPIOD_ASIS); ++ ++ gpiod_direction_output(spi_reset, 1); ++ gpiod_direction_input(data_available); ++ ++ /* Reset the slave. */ ++ gpiod_set_value(spi_reset, false); ++ mdelay(1); ++ gpiod_set_value(spi_reset, true); ++ ++ /* Give time for spi slave to start. */ ++ mdelay(64); ++ ++ return 0; ++} ++ ++static void pisnd_spi_gpio_uninit(void) ++{ ++ gpiod_set_value(spi_reset, false); ++ gpiod_put(spi_reset); ++ spi_reset = NULL; ++ ++ gpiod_put(data_available); ++ data_available = NULL; ++} ++ ++static int pisnd_spi_gpio_irq_init(struct device *dev) ++{ ++ return request_irq( ++ gpiod_to_irq(data_available), ++ data_available_interrupt_handler, ++ IRQF_TIMER | IRQF_TRIGGER_RISING, ++ "data_available_int", ++ NULL ++ ); ++} ++ ++static void pisnd_spi_gpio_irq_uninit(void) ++{ ++ free_irq(gpiod_to_irq(data_available), NULL); ++} ++ ++static int spi_read_info(void) ++{ ++ uint16_t tmp; ++ uint8_t count; ++ uint8_t n; ++ uint8_t i; ++ uint8_t j; ++ char buffer[257]; ++ int ret; ++ char *p; ++ ++ memset(g_serial_num, 0, sizeof(g_serial_num)); ++ memset(g_version, 0, sizeof(g_version)); ++ memset(g_id, 0, sizeof(g_id)); ++ ++ tmp = spi_transfer16(0); ++ ++ if (!(tmp >> 8)) ++ return -EINVAL; ++ ++ count = tmp & 0xff; ++ ++ for (i = 0; i < count; ++i) { ++ memset(buffer, 0, sizeof(buffer)); ++ ret = spi_read_bytes(buffer, sizeof(buffer)-1, &n); ++ ++ if (ret < 0) ++ return ret; ++ ++ switch (i) { ++ case 0: ++ if (n != 2) ++ return -EINVAL; ++ ++ snprintf( ++ g_version, ++ sizeof(g_version), ++ "%x.%02x", ++ buffer[0], ++ buffer[1] ++ ); ++ break; ++ case 1: ++ if (n >= sizeof(g_serial_num)) ++ return -EINVAL; ++ ++ memcpy(g_serial_num, buffer, sizeof(g_serial_num)); ++ break; ++ case 2: ++ { ++ if (n >= sizeof(g_id)) ++ return -EINVAL; ++ ++ p = g_id; ++ for (j = 0; j < n; ++j) ++ p += sprintf(p, "%02x", buffer[j]); ++ } ++ break; ++ default: ++ break; ++ } ++ } ++ ++ return 0; ++} ++ ++static int pisnd_spi_init(struct device *dev) ++{ ++ int ret; ++ struct spi_device *spi; ++ ++ memset(g_serial_num, 0, sizeof(g_serial_num)); ++ memset(g_id, 0, sizeof(g_id)); ++ memset(g_version, 0, sizeof(g_version)); ++ ++ spi = pisnd_spi_find_device(); ++ ++ if (spi != NULL) { ++ printd("initializing spi!\n"); ++ pisnd_spi_device = spi; ++ ret = spi_setup(pisnd_spi_device); ++ } else { ++ printe("SPI device not found, deferring!\n"); ++ return -EPROBE_DEFER; ++ } ++ ++ ret = pisnd_spi_gpio_init(dev); ++ ++ if (ret < 0) { ++ printe("SPI GPIO init failed: %d\n", ret); ++ spi_dev_put(pisnd_spi_device); ++ pisnd_spi_device = NULL; ++ pisnd_spi_gpio_uninit(); ++ return ret; ++ } ++ ++ ret = spi_read_info(); ++ ++ if (ret < 0) { ++ printe("Reading card info failed: %d\n", ret); ++ spi_dev_put(pisnd_spi_device); ++ pisnd_spi_device = NULL; ++ pisnd_spi_gpio_uninit(); ++ return ret; ++ } ++ ++ /* Flash the LEDs. */ ++ spi_transfer16(0xf000); ++ ++ ret = pisnd_spi_gpio_irq_init(dev); ++ if (ret < 0) { ++ printe("SPI irq request failed: %d\n", ret); ++ spi_dev_put(pisnd_spi_device); ++ pisnd_spi_device = NULL; ++ pisnd_spi_gpio_irq_uninit(); ++ pisnd_spi_gpio_uninit(); ++ } ++ ++ ret = pisnd_init_workqueues(); ++ if (ret != 0) { ++ printe("Workqueue initialization failed: %d\n", ret); ++ spi_dev_put(pisnd_spi_device); ++ pisnd_spi_device = NULL; ++ pisnd_spi_gpio_irq_uninit(); ++ pisnd_spi_gpio_uninit(); ++ pisnd_uninit_workqueues(); ++ return ret; ++ } ++ ++ if (pisnd_spi_has_more()) { ++ printd("data is available, scheduling from init\n"); ++ pisnd_schedule_process(TASK_PROCESS); ++ } ++ ++ return 0; ++} ++ ++static void pisnd_spi_uninit(void) ++{ ++ pisnd_uninit_workqueues(); ++ ++ spi_dev_put(pisnd_spi_device); ++ pisnd_spi_device = NULL; ++ ++ pisnd_spi_gpio_irq_uninit(); ++ pisnd_spi_gpio_uninit(); ++} ++ ++static void pisnd_spi_send(uint8_t val) ++{ ++ kfifo_put(&spi_fifo_out, val); ++ printd("schedule from spi_send\n"); ++ pisnd_schedule_process(TASK_PROCESS); ++} ++ ++static uint8_t pisnd_spi_recv(uint8_t *buffer, uint8_t length) ++{ ++ return kfifo_out(&spi_fifo_in, buffer, length); ++} ++ ++static void pisnd_spi_set_callback(pisnd_spi_recv_cb cb, void *data) ++{ ++ g_recvData = data; ++ g_recvCallback = cb; ++} ++ ++static const char *pisnd_spi_get_serial(void) ++{ ++ if (strlen(g_serial_num)) ++ return g_serial_num; ++ ++ return ""; ++} ++ ++static const char *pisnd_spi_get_id(void) ++{ ++ if (strlen(g_id)) ++ return g_id; ++ ++ return ""; ++} ++ ++static const char *pisnd_spi_get_version(void) ++{ ++ if (strlen(g_version)) ++ return g_version; ++ ++ return ""; ++} ++ ++static const struct of_device_id pisound_of_match[] = { ++ { .compatible = "blokaslabs,pisound", }, ++ { .compatible = "blokaslabs,pisound-spi", }, ++ {}, ++}; ++ ++static struct gpio_desc *osr0, *osr1, *osr2; ++static struct gpio_desc *reset; ++static struct gpio_desc *button; ++ ++static int pisnd_hw_params( ++ struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params ++ ) ++{ ++ printd("rate = %d\n", params_rate(params)); ++ printd("ch = %d\n", params_channels(params)); ++ printd("bits = %u\n", ++ snd_pcm_format_physical_width(params_format(params))); ++ printd("format = %d\n", params_format(params)); ++ ++ gpiod_set_value(reset, false); ++ ++ switch (params_rate(params)) { ++ case 48000: ++ gpiod_set_value(osr0, true); ++ gpiod_set_value(osr1, false); ++ gpiod_set_value(osr2, false); ++ break; ++ case 96000: ++ gpiod_set_value(osr0, true); ++ gpiod_set_value(osr1, true); ++ gpiod_set_value(osr2, false); ++ break; ++ case 192000: ++ gpiod_set_value(osr0, true); ++ gpiod_set_value(osr1, true); ++ gpiod_set_value(osr2, true); ++ break; ++ default: ++ printe("Unsupported rate %u!\n", params_rate(params)); ++ return -EINVAL; ++ } ++ ++ gpiod_set_value(reset, true); ++ ++ return 0; ++} ++ ++static unsigned int rates[3] = { ++ 48000, 96000, 192000 ++}; ++ ++static struct snd_pcm_hw_constraint_list constraints_rates = { ++ .count = ARRAY_SIZE(rates), ++ .list = rates, ++ .mask = 0, ++}; ++ ++static unsigned int sample_bits[] = { ++ 24, 32 ++}; ++ ++static struct snd_pcm_hw_constraint_list constraints_sample_bits = { ++ .count = ARRAY_SIZE(sample_bits), ++ .list = sample_bits, ++ .mask = 0, ++}; ++ ++static int pisnd_startup(struct snd_pcm_substream *substream) ++{ ++ int err = snd_pcm_hw_constraint_list( ++ substream->runtime, ++ 0, ++ SNDRV_PCM_HW_PARAM_RATE, ++ &constraints_rates ++ ); ++ ++ if (err < 0) ++ return err; ++ ++ err = snd_pcm_hw_constraint_list( ++ substream->runtime, ++ 0, ++ SNDRV_PCM_HW_PARAM_SAMPLE_BITS, ++ &constraints_sample_bits ++ ); ++ ++ if (err < 0) ++ return err; ++ ++ return 0; ++} ++ ++static struct snd_soc_ops pisnd_ops = { ++ .startup = pisnd_startup, ++ .hw_params = pisnd_hw_params, ++}; ++ ++static struct snd_soc_dai_link pisnd_dai[] = { ++ { ++ .name = "pisound", ++ .stream_name = "pisound", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "snd-soc-dummy-dai", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "snd-soc-dummy", ++ .dai_fmt = ++ SND_SOC_DAIFMT_I2S | ++ SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM, ++ .ops = &pisnd_ops, ++ }, ++}; ++ ++static int pisnd_card_probe(struct snd_soc_card *card) ++{ ++ int err = pisnd_midi_init(card->snd_card); ++ ++ if (err < 0) ++ printe("pisnd_midi_init failed: %d\n", err); ++ ++ return err; ++} ++ ++static int pisnd_card_remove(struct snd_soc_card *card) ++{ ++ pisnd_midi_uninit(); ++ return 0; ++} ++ ++static struct snd_soc_card pisnd_card = { ++ .name = "pisound", ++ .owner = THIS_MODULE, ++ .dai_link = pisnd_dai, ++ .num_links = ARRAY_SIZE(pisnd_dai), ++ .probe = pisnd_card_probe, ++ .remove = pisnd_card_remove, ++}; ++ ++static int pisnd_init_gpio(struct device *dev) ++{ ++ osr0 = gpiod_get_index(dev, "osr", 0, GPIOD_ASIS); ++ osr1 = gpiod_get_index(dev, "osr", 1, GPIOD_ASIS); ++ osr2 = gpiod_get_index(dev, "osr", 2, GPIOD_ASIS); ++ ++ reset = gpiod_get_index(dev, "reset", 0, GPIOD_ASIS); ++ ++ button = gpiod_get_index(dev, "button", 0, GPIOD_ASIS); ++ ++ gpiod_direction_output(osr0, 1); ++ gpiod_direction_output(osr1, 1); ++ gpiod_direction_output(osr2, 1); ++ gpiod_direction_output(reset, 1); ++ ++ gpiod_set_value(reset, false); ++ gpiod_set_value(osr0, true); ++ gpiod_set_value(osr1, false); ++ gpiod_set_value(osr2, false); ++ gpiod_set_value(reset, true); ++ ++ gpiod_export(button, false); ++ ++ return 0; ++} ++ ++static int pisnd_uninit_gpio(void) ++{ ++ int i; ++ ++ struct gpio_desc **gpios[] = { ++ &osr0, &osr1, &osr2, &reset, &button, ++ }; ++ ++ gpiod_unexport(button); ++ ++ for (i = 0; i < ARRAY_SIZE(gpios); ++i) { ++ if (*gpios[i] == NULL) { ++ printd("weird, GPIO[%d] is NULL already\n", i); ++ continue; ++ } ++ ++ gpiod_put(*gpios[i]); ++ *gpios[i] = NULL; ++ } ++ ++ return 0; ++} ++ ++static struct kobject *pisnd_kobj; ++ ++static ssize_t pisnd_serial_show( ++ struct kobject *kobj, ++ struct kobj_attribute *attr, ++ char *buf ++ ) ++{ ++ return sprintf(buf, "%s\n", pisnd_spi_get_serial()); ++} ++ ++static ssize_t pisnd_id_show( ++ struct kobject *kobj, ++ struct kobj_attribute *attr, ++ char *buf ++ ) ++{ ++ return sprintf(buf, "%s\n", pisnd_spi_get_id()); ++} ++ ++static ssize_t pisnd_version_show( ++ struct kobject *kobj, ++ struct kobj_attribute *attr, ++ char *buf ++ ) ++{ ++ return sprintf(buf, "%s\n", pisnd_spi_get_version()); ++} ++ ++static struct kobj_attribute pisnd_serial_attribute = ++ __ATTR(serial, 0644, pisnd_serial_show, NULL); ++static struct kobj_attribute pisnd_id_attribute = ++ __ATTR(id, 0644, pisnd_id_show, NULL); ++static struct kobj_attribute pisnd_version_attribute = ++ __ATTR(version, 0644, pisnd_version_show, NULL); ++ ++static struct attribute *attrs[] = { ++ &pisnd_serial_attribute.attr, ++ &pisnd_id_attribute.attr, ++ &pisnd_version_attribute.attr, ++ NULL ++}; ++ ++static struct attribute_group attr_group = { .attrs = attrs }; ++ ++static int pisnd_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ int i; ++ ++ ret = pisnd_spi_init(&pdev->dev); ++ if (ret < 0) { ++ printe("pisnd_spi_init failed: %d\n", ret); ++ return ret; ++ } ++ ++ printi("Detected pisound card:\n"); ++ printi("\tSerial: %s\n", pisnd_spi_get_serial()); ++ printi("\tVersion: %s\n", pisnd_spi_get_version()); ++ printi("\tId: %s\n", pisnd_spi_get_id()); ++ ++ pisnd_kobj = kobject_create_and_add("pisound", kernel_kobj); ++ if (!pisnd_kobj) { ++ pisnd_spi_uninit(); ++ return -ENOMEM; ++ } ++ ++ ret = sysfs_create_group(pisnd_kobj, &attr_group); ++ if (ret < 0) { ++ pisnd_spi_uninit(); ++ kobject_put(pisnd_kobj); ++ return -ENOMEM; ++ } ++ ++ pisnd_init_gpio(&pdev->dev); ++ pisnd_card.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ ++ i2s_node = of_parse_phandle( ++ pdev->dev.of_node, ++ "i2s-controller", ++ 0 ++ ); ++ ++ for (i = 0; i < pisnd_card.num_links; ++i) { ++ struct snd_soc_dai_link *dai = &pisnd_dai[i]; ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ dai->stream_name = pisnd_spi_get_serial(); ++ } ++ } ++ } ++ ++ ret = snd_soc_register_card(&pisnd_card); ++ ++ if (ret < 0) { ++ printe("snd_soc_register_card() failed: %d\n", ret); ++ pisnd_uninit_gpio(); ++ kobject_put(pisnd_kobj); ++ pisnd_spi_uninit(); ++ } ++ ++ return ret; ++} ++ ++static int pisnd_remove(struct platform_device *pdev) ++{ ++ printi("Unloading.\n"); ++ ++ if (pisnd_kobj) { ++ kobject_put(pisnd_kobj); ++ pisnd_kobj = NULL; ++ } ++ ++ pisnd_spi_uninit(); ++ ++ /* Turn off */ ++ gpiod_set_value(reset, false); ++ pisnd_uninit_gpio(); ++ ++ return snd_soc_unregister_card(&pisnd_card); ++} ++ ++MODULE_DEVICE_TABLE(of, pisound_of_match); ++ ++static struct platform_driver pisnd_driver = { ++ .driver = { ++ .name = "snd-rpi-pisound", ++ .owner = THIS_MODULE, ++ .of_match_table = pisound_of_match, ++ }, ++ .probe = pisnd_probe, ++ .remove = pisnd_remove, ++}; ++ ++module_platform_driver(pisnd_driver); ++ ++MODULE_AUTHOR("Giedrius Trainavicius "); ++MODULE_DESCRIPTION("ASoC Driver for pisound, http://blokas.io/pisound"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/950-0085-rpi_display-add-backlight-driver-and-overlay.patch b/target/linux/brcm2708/patches-4.9/950-0085-rpi_display-add-backlight-driver-and-overlay.patch new file mode 100644 index 000000000000..67c0e3f5cd8f --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0085-rpi_display-add-backlight-driver-and-overlay.patch @@ -0,0 +1,164 @@ +From ae5ae9278768c3d096910705bfa9af85da20a8cf Mon Sep 17 00:00:00 2001 +From: P33M +Date: Wed, 21 Oct 2015 14:55:21 +0100 +Subject: [PATCH] rpi_display: add backlight driver and overlay + +Add a mailbox-driven backlight controller for the Raspberry Pi DSI +touchscreen display. Requires updated GPU firmware to recognise the +mailbox request. + +Signed-off-by: Gordon Hollingworth +--- + drivers/video/backlight/Kconfig | 6 ++ + drivers/video/backlight/Makefile | 1 + + drivers/video/backlight/rpi_backlight.c | 119 ++++++++++++++++++++++++++++++++ + 3 files changed, 126 insertions(+) + create mode 100644 drivers/video/backlight/rpi_backlight.c + +--- a/drivers/video/backlight/Kconfig ++++ b/drivers/video/backlight/Kconfig +@@ -265,6 +265,12 @@ config BACKLIGHT_PWM + If you have a LCD backlight adjustable by PWM, say Y to enable + this driver. + ++config BACKLIGHT_RPI ++ tristate "Raspberry Pi display firmware driven backlight" ++ help ++ If you have the Raspberry Pi DSI touchscreen display, say Y to ++ enable the mailbox-controlled backlight driver. ++ + config BACKLIGHT_DA903X + tristate "Backlight Driver for DA9030/DA9034 using WLED" + depends on PMIC_DA903X +--- a/drivers/video/backlight/Makefile ++++ b/drivers/video/backlight/Makefile +@@ -50,6 +50,7 @@ obj-$(CONFIG_BACKLIGHT_PANDORA) += pand + obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o + obj-$(CONFIG_BACKLIGHT_PM8941_WLED) += pm8941-wled.o + obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o ++obj-$(CONFIG_BACKLIGHT_RPI) += rpi_backlight.o + obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o + obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o + obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o +--- /dev/null ++++ b/drivers/video/backlight/rpi_backlight.c +@@ -0,0 +1,119 @@ ++/* ++ * rpi_bl.c - Backlight controller through VPU ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++struct rpi_backlight { ++ struct device *dev; ++ struct device *fbdev; ++ struct rpi_firmware *fw; ++}; ++ ++static int rpi_backlight_update_status(struct backlight_device *bl) ++{ ++ struct rpi_backlight *gbl = bl_get_data(bl); ++ int brightness = bl->props.brightness; ++ int ret; ++ ++ if (bl->props.power != FB_BLANK_UNBLANK || ++ bl->props.fb_blank != FB_BLANK_UNBLANK || ++ bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK)) ++ brightness = 0; ++ ++ ret = rpi_firmware_property(gbl->fw, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT, ++ &brightness, sizeof(brightness)); ++ if (ret) { ++ dev_err(gbl->dev, "Failed to set brightness\n"); ++ return ret; ++ } ++ ++ if (brightness < 0) { ++ dev_err(gbl->dev, "Backlight change failed\n"); ++ return -EAGAIN; ++ } ++ ++ return 0; ++} ++ ++static const struct backlight_ops rpi_backlight_ops = { ++ .options = BL_CORE_SUSPENDRESUME, ++ .update_status = rpi_backlight_update_status, ++}; ++ ++static int rpi_backlight_probe(struct platform_device *pdev) ++{ ++ struct backlight_properties props; ++ struct backlight_device *bl; ++ struct rpi_backlight *gbl; ++ struct device_node *fw_node; ++ ++ gbl = devm_kzalloc(&pdev->dev, sizeof(*gbl), GFP_KERNEL); ++ if (gbl == NULL) ++ return -ENOMEM; ++ ++ gbl->dev = &pdev->dev; ++ ++ fw_node = of_parse_phandle(pdev->dev.of_node, "firmware", 0); ++ if (!fw_node) { ++ dev_err(&pdev->dev, "Missing firmware node\n"); ++ return -ENOENT; ++ } ++ ++ gbl->fw = rpi_firmware_get(fw_node); ++ if (!gbl->fw) ++ return -EPROBE_DEFER; ++ ++ memset(&props, 0, sizeof(props)); ++ props.type = BACKLIGHT_RAW; ++ props.max_brightness = 255; ++ bl = devm_backlight_device_register(&pdev->dev, dev_name(&pdev->dev), ++ &pdev->dev, gbl, &rpi_backlight_ops, ++ &props); ++ if (IS_ERR(bl)) { ++ dev_err(&pdev->dev, "failed to register backlight\n"); ++ return PTR_ERR(bl); ++ } ++ ++ bl->props.brightness = 255; ++ backlight_update_status(bl); ++ ++ platform_set_drvdata(pdev, bl); ++ return 0; ++} ++ ++static const struct of_device_id rpi_backlight_of_match[] = { ++ { .compatible = "raspberrypi,rpi-backlight" }, ++ { /* sentinel */ } ++}; ++MODULE_DEVICE_TABLE(of, rpi_backlight_of_match); ++ ++static struct platform_driver rpi_backlight_driver = { ++ .driver = { ++ .name = "rpi-backlight", ++ .of_match_table = of_match_ptr(rpi_backlight_of_match), ++ }, ++ .probe = rpi_backlight_probe, ++}; ++ ++module_platform_driver(rpi_backlight_driver); ++ ++MODULE_AUTHOR("Gordon Hollingworth "); ++MODULE_DESCRIPTION("Raspberry Pi mailbox based Backlight Driver"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/brcm2708/patches-4.9/950-0086-bcm2835-virtgpio-Virtual-GPIO-driver.patch b/target/linux/brcm2708/patches-4.9/950-0086-bcm2835-virtgpio-Virtual-GPIO-driver.patch new file mode 100644 index 000000000000..425224e5a591 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0086-bcm2835-virtgpio-Virtual-GPIO-driver.patch @@ -0,0 +1,267 @@ +From 1b6bee75a64ca43404e6bc8ff2fdbe8b1d0a0423 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Tue, 23 Feb 2016 19:56:04 +0000 +Subject: [PATCH] bcm2835-virtgpio: Virtual GPIO driver + +Add a virtual GPIO driver that uses the firmware mailbox interface to +request that the VPU toggles LEDs. +--- + drivers/gpio/Kconfig | 6 + + drivers/gpio/Makefile | 1 + + drivers/gpio/gpio-bcm-virt.c | 214 +++++++++++++++++++++++++++++ + include/soc/bcm2835/raspberrypi-firmware.h | 1 + + 4 files changed, 222 insertions(+) + create mode 100644 drivers/gpio/gpio-bcm-virt.c + +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -134,6 +134,12 @@ config GPIO_BCM_KONA + help + Turn on GPIO support for Broadcom "Kona" chips. + ++config GPIO_BCM_VIRT ++ bool "Broadcom Virt GPIO" ++ depends on OF_GPIO && RASPBERRYPI_FIRMWARE && (ARCH_BCM2835 || COMPILE_TEST) ++ help ++ Turn on virtual GPIO support for Broadcom BCM283X chips. ++ + config GPIO_BRCMSTB + tristate "BRCMSTB GPIO support" + default y if (ARCH_BRCMSTB || BMIPS_GENERIC) +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -31,6 +31,7 @@ obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o + obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o + obj-$(CONFIG_GPIO_AXP209) += gpio-axp209.o + obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o ++obj-$(CONFIG_GPIO_BCM_VIRT) += gpio-bcm-virt.o + obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o + obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o + obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o +--- /dev/null ++++ b/drivers/gpio/gpio-bcm-virt.c +@@ -0,0 +1,214 @@ ++/* ++ * brcmvirt GPIO driver ++ * ++ * Copyright (C) 2012,2013 Dom Cobley ++ * Based on gpio-clps711x.c by Alexander Shiyan ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define MODULE_NAME "brcmvirt-gpio" ++#define NUM_GPIO 2 ++ ++struct brcmvirt_gpio { ++ struct gpio_chip gc; ++ u32 __iomem *ts_base; ++ /* two packed 16-bit counts of enabled and disables ++ Allows host to detect a brief enable that was missed */ ++ u32 enables_disables[NUM_GPIO]; ++ dma_addr_t bus_addr; ++}; ++ ++static int brcmvirt_gpio_dir_in(struct gpio_chip *gc, unsigned off) ++{ ++ struct brcmvirt_gpio *gpio; ++ gpio = container_of(gc, struct brcmvirt_gpio, gc); ++ return -EINVAL; ++} ++ ++static int brcmvirt_gpio_dir_out(struct gpio_chip *gc, unsigned off, int val) ++{ ++ struct brcmvirt_gpio *gpio; ++ gpio = container_of(gc, struct brcmvirt_gpio, gc); ++ return 0; ++} ++ ++static int brcmvirt_gpio_get(struct gpio_chip *gc, unsigned off) ++{ ++ struct brcmvirt_gpio *gpio; ++ unsigned v; ++ gpio = container_of(gc, struct brcmvirt_gpio, gc); ++ v = readl(gpio->ts_base + off); ++ return (v >> off) & 1; ++} ++ ++static void brcmvirt_gpio_set(struct gpio_chip *gc, unsigned off, int val) ++{ ++ struct brcmvirt_gpio *gpio; ++ u16 enables, disables; ++ s16 diff; ++ bool lit; ++ gpio = container_of(gc, struct brcmvirt_gpio, gc); ++ enables = gpio->enables_disables[off] >> 16; ++ disables = gpio->enables_disables[off] >> 0; ++ diff = (s16)(enables - disables); ++ lit = diff > 0; ++ if ((val && lit) || (!val && !lit)) ++ return; ++ if (val) ++ enables++; ++ else ++ disables++; ++ diff = (s16)(enables - disables); ++ BUG_ON(diff != 0 && diff != 1); ++ gpio->enables_disables[off] = (enables << 16) | (disables << 0); ++ writel(gpio->enables_disables[off], gpio->ts_base + off); ++} ++ ++static int brcmvirt_gpio_probe(struct platform_device *pdev) ++{ ++ int err = 0; ++ struct device *dev = &pdev->dev; ++ struct device_node *np = dev->of_node; ++ struct device_node *fw_node; ++ struct rpi_firmware *fw; ++ struct brcmvirt_gpio *ucb; ++ u32 gpiovirtbuf; ++ ++ fw_node = of_parse_phandle(np, "firmware", 0); ++ if (!fw_node) { ++ dev_err(dev, "Missing firmware node\n"); ++ return -ENOENT; ++ } ++ ++ fw = rpi_firmware_get(fw_node); ++ if (!fw) ++ return -EPROBE_DEFER; ++ ++ ucb = devm_kzalloc(dev, sizeof *ucb, GFP_KERNEL); ++ if (!ucb) { ++ err = -EINVAL; ++ goto out; ++ } ++ ++ ucb->ts_base = dma_zalloc_coherent(dev, PAGE_SIZE, &ucb->bus_addr, GFP_KERNEL); ++ if (!ucb->ts_base) { ++ pr_err("[%s]: failed to dma_alloc_coherent(%ld)\n", ++ __func__, PAGE_SIZE); ++ err = -ENOMEM; ++ goto out; ++ } ++ ++ gpiovirtbuf = (u32)ucb->bus_addr; ++ err = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_GPIOVIRTBUF, ++ &gpiovirtbuf, sizeof(gpiovirtbuf)); ++ ++ if (err || gpiovirtbuf != 0) { ++ dev_warn(dev, "Failed to set gpiovirtbuf, trying to get err:%x\n", err); ++ dma_free_coherent(dev, PAGE_SIZE, ucb->ts_base, ucb->bus_addr); ++ ucb->ts_base = 0; ++ ucb->bus_addr = 0; ++ } ++ ++ if (!ucb->ts_base) { ++ err = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_GET_GPIOVIRTBUF, ++ &gpiovirtbuf, sizeof(gpiovirtbuf)); ++ ++ if (err) { ++ dev_err(dev, "Failed to get gpiovirtbuf\n"); ++ goto out; ++ } ++ ++ if (!gpiovirtbuf) { ++ dev_err(dev, "No virtgpio buffer\n"); ++ err = -ENOENT; ++ goto out; ++ } ++ ++ // mmap the physical memory ++ gpiovirtbuf &= ~0xc0000000; ++ ucb->ts_base = ioremap(gpiovirtbuf, 4096); ++ if (ucb->ts_base == NULL) { ++ dev_err(dev, "Failed to map physical address\n"); ++ err = -ENOENT; ++ goto out; ++ } ++ ucb->bus_addr = 0; ++ } ++ ucb->gc.label = MODULE_NAME; ++ ucb->gc.owner = THIS_MODULE; ++ //ucb->gc.dev = dev; ++ ucb->gc.of_node = np; ++ ucb->gc.base = 100; ++ ucb->gc.ngpio = NUM_GPIO; ++ ++ ucb->gc.direction_input = brcmvirt_gpio_dir_in; ++ ucb->gc.direction_output = brcmvirt_gpio_dir_out; ++ ucb->gc.get = brcmvirt_gpio_get; ++ ucb->gc.set = brcmvirt_gpio_set; ++ ucb->gc.can_sleep = true; ++ ++ err = gpiochip_add(&ucb->gc); ++ if (err) ++ goto out; ++ ++ platform_set_drvdata(pdev, ucb); ++ ++ return 0; ++out: ++ if (ucb->bus_addr) { ++ dma_free_coherent(dev, PAGE_SIZE, ucb->ts_base, ucb->bus_addr); ++ ucb->bus_addr = 0; ++ ucb->ts_base = NULL; ++ } else if (ucb->ts_base) { ++ iounmap(ucb->ts_base); ++ ucb->ts_base = NULL; ++ } ++ return err; ++} ++ ++static int brcmvirt_gpio_remove(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ int err = 0; ++ struct brcmvirt_gpio *ucb = platform_get_drvdata(pdev); ++ ++ gpiochip_remove(&ucb->gc); ++ if (ucb->bus_addr) ++ dma_free_coherent(dev, PAGE_SIZE, ucb->ts_base, ucb->bus_addr); ++ else if (ucb->ts_base) ++ iounmap(ucb->ts_base); ++ return err; ++} ++ ++static const struct of_device_id __maybe_unused brcmvirt_gpio_ids[] = { ++ { .compatible = "brcm,bcm2835-virtgpio" }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, brcmvirt_gpio_ids); ++ ++static struct platform_driver brcmvirt_gpio_driver = { ++ .driver = { ++ .name = MODULE_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(brcmvirt_gpio_ids), ++ }, ++ .probe = brcmvirt_gpio_probe, ++ .remove = brcmvirt_gpio_remove, ++}; ++module_platform_driver(brcmvirt_gpio_driver); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Dom Cobley "); ++MODULE_DESCRIPTION("brcmvirt GPIO driver"); ++MODULE_ALIAS("platform:brcmvirt-gpio"); +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -116,6 +116,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, + RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, + RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_GPIOVIRTBUF = 0x00048020, + RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e, + RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f, + diff --git a/target/linux/brcm2708/patches-4.9/950-0087-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch b/target/linux/brcm2708/patches-4.9/950-0087-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch new file mode 100644 index 000000000000..40963de8762b --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0087-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch @@ -0,0 +1,29 @@ +From b34475b447c7e97fa9c4a854849f6e856fe59931 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 23 Feb 2016 17:26:48 +0000 +Subject: [PATCH] amba_pl011: Don't use DT aliases for numbering + +The pl011 driver looks for DT aliases of the form "serial", +and if found uses as the device ID. This can cause +/dev/ttyAMA0 to become /dev/ttyAMA1, which is confusing if the +other serial port is provided by the 8250 driver which doesn't +use the same logic. +--- + drivers/tty/serial/amba-pl011.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/tty/serial/amba-pl011.c ++++ b/drivers/tty/serial/amba-pl011.c +@@ -2441,7 +2441,12 @@ static int pl011_setup_port(struct devic + if (IS_ERR(base)) + return PTR_ERR(base); + ++ /* Don't use DT serial aliases - it causes the device to ++ be renumbered to ttyAMA1 if it is the second serial port in the ++ system, even though the other one is ttyS0. The 8250 driver ++ doesn't use this logic, so always remains ttyS0. + index = pl011_probe_dt_alias(index, dev); ++ */ + + uap->old_cr = 0; + uap->port.dev = dev; diff --git a/target/linux/brcm2708/patches-4.9/950-0090-OF-DT-Overlay-configfs-interface.patch b/target/linux/brcm2708/patches-4.9/950-0090-OF-DT-Overlay-configfs-interface.patch new file mode 100644 index 000000000000..941047adc5e2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0090-OF-DT-Overlay-configfs-interface.patch @@ -0,0 +1,424 @@ +From ef4a8376af32bb6722e1ea933a9e1a83ebc8f175 Mon Sep 17 00:00:00 2001 +From: Pantelis Antoniou +Date: Wed, 3 Dec 2014 13:23:28 +0200 +Subject: [PATCH] OF: DT-Overlay configfs interface + +This is a port of Pantelis Antoniou's v3 port that makes use of the +new upstreamed configfs support for binary attributes. + +Original commit message: + +Add a runtime interface to using configfs for generic device tree overlay +usage. With it its possible to use device tree overlays without having +to use a per-platform overlay manager. + +Please see Documentation/devicetree/configfs-overlays.txt for more info. + +Changes since v2: +- Removed ifdef CONFIG_OF_OVERLAY (since for now it's required) +- Created a documentation entry +- Slight rewording in Kconfig + +Changes since v1: +- of_resolve() -> of_resolve_phandles(). + +Originally-signed-off-by: Pantelis Antoniou +Signed-off-by: Phil Elwell + +DT configfs: Fix build errors on other platforms + +Signed-off-by: Phil Elwell + +DT configfs: fix build error + +There is an error when compiling rpi-4.6.y branch: + CC drivers/of/configfs.o +drivers/of/configfs.c:291:21: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] + .default_groups = of_cfs_def_groups, + ^ +drivers/of/configfs.c:291:21: note: (near initialization for 'of_cfs_subsys.su_group.default_groups.next') + +The .default_groups is linked list since commit +1ae1602de028acaa42a0f6ff18d19756f8e825c6. +This commit uses configfs_add_default_group to fix this problem. + +Signed-off-by: Slawomir Stepien +--- + Documentation/devicetree/configfs-overlays.txt | 31 +++ + drivers/of/Kconfig | 7 + + drivers/of/Makefile | 1 + + drivers/of/configfs.c | 311 +++++++++++++++++++++++++ + 4 files changed, 350 insertions(+) + create mode 100644 Documentation/devicetree/configfs-overlays.txt + create mode 100644 drivers/of/configfs.c + +--- /dev/null ++++ b/Documentation/devicetree/configfs-overlays.txt +@@ -0,0 +1,31 @@ ++Howto use the configfs overlay interface. ++ ++A device-tree configfs entry is created in /config/device-tree/overlays ++and and it is manipulated using standard file system I/O. ++Note that this is a debug level interface, for use by developers and ++not necessarily something accessed by normal users due to the ++security implications of having direct access to the kernel's device tree. ++ ++* To create an overlay you mkdir the directory: ++ ++ # mkdir /config/device-tree/overlays/foo ++ ++* Either you echo the overlay firmware file to the path property file. ++ ++ # echo foo.dtbo >/config/device-tree/overlays/foo/path ++ ++* Or you cat the contents of the overlay to the dtbo file ++ ++ # cat foo.dtbo >/config/device-tree/overlays/foo/dtbo ++ ++The overlay file will be applied, and devices will be created/destroyed ++as required. ++ ++To remove it simply rmdir the directory. ++ ++ # rmdir /config/device-tree/overlays/foo ++ ++The rationalle of the dual interface (firmware & direct copy) is that each is ++better suited to different use patterns. The firmware interface is what's ++intended to be used by hardware managers in the kernel, while the copy interface ++make sense for developers (since it avoids problems with namespaces). +--- a/drivers/of/Kconfig ++++ b/drivers/of/Kconfig +@@ -112,4 +112,11 @@ config OF_OVERLAY + config OF_NUMA + bool + ++config OF_CONFIGFS ++ bool "Device Tree Overlay ConfigFS interface" ++ select CONFIGFS_FS ++ select OF_OVERLAY ++ help ++ Enable a simple user-space driven DT overlay interface. ++ + endif # OF +--- a/drivers/of/Makefile ++++ b/drivers/of/Makefile +@@ -1,4 +1,5 @@ + obj-y = base.o device.o platform.o ++obj-$(CONFIG_OF_CONFIGFS) += configfs.o + obj-$(CONFIG_OF_DYNAMIC) += dynamic.o + obj-$(CONFIG_OF_FLATTREE) += fdt.o + obj-$(CONFIG_OF_EARLY_FLATTREE) += fdt_address.o +--- /dev/null ++++ b/drivers/of/configfs.c +@@ -0,0 +1,311 @@ ++/* ++ * Configfs entries for device-tree ++ * ++ * Copyright (C) 2013 - Pantelis Antoniou ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "of_private.h" ++ ++struct cfs_overlay_item { ++ struct config_item item; ++ ++ char path[PATH_MAX]; ++ ++ const struct firmware *fw; ++ struct device_node *overlay; ++ int ov_id; ++ ++ void *dtbo; ++ int dtbo_size; ++}; ++ ++static int create_overlay(struct cfs_overlay_item *overlay, void *blob) ++{ ++ int err; ++ ++ /* unflatten the tree */ ++ of_fdt_unflatten_tree(blob, NULL, &overlay->overlay); ++ if (overlay->overlay == NULL) { ++ pr_err("%s: failed to unflatten tree\n", __func__); ++ err = -EINVAL; ++ goto out_err; ++ } ++ pr_debug("%s: unflattened OK\n", __func__); ++ ++ /* mark it as detached */ ++ of_node_set_flag(overlay->overlay, OF_DETACHED); ++ ++ /* perform resolution */ ++ err = of_resolve_phandles(overlay->overlay); ++ if (err != 0) { ++ pr_err("%s: Failed to resolve tree\n", __func__); ++ goto out_err; ++ } ++ pr_debug("%s: resolved OK\n", __func__); ++ ++ err = of_overlay_create(overlay->overlay); ++ if (err < 0) { ++ pr_err("%s: Failed to create overlay (err=%d)\n", ++ __func__, err); ++ goto out_err; ++ } ++ overlay->ov_id = err; ++ ++out_err: ++ return err; ++} ++ ++static inline struct cfs_overlay_item *to_cfs_overlay_item( ++ struct config_item *item) ++{ ++ return item ? container_of(item, struct cfs_overlay_item, item) : NULL; ++} ++ ++static ssize_t cfs_overlay_item_path_show(struct config_item *item, ++ char *page) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ return sprintf(page, "%s\n", overlay->path); ++} ++ ++static ssize_t cfs_overlay_item_path_store(struct config_item *item, ++ const char *page, size_t count) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ const char *p = page; ++ char *s; ++ int err; ++ ++ /* if it's set do not allow changes */ ++ if (overlay->path[0] != '\0' || overlay->dtbo_size > 0) ++ return -EPERM; ++ ++ /* copy to path buffer (and make sure it's always zero terminated */ ++ count = snprintf(overlay->path, sizeof(overlay->path) - 1, "%s", p); ++ overlay->path[sizeof(overlay->path) - 1] = '\0'; ++ ++ /* strip trailing newlines */ ++ s = overlay->path + strlen(overlay->path); ++ while (s > overlay->path && *--s == '\n') ++ *s = '\0'; ++ ++ pr_debug("%s: path is '%s'\n", __func__, overlay->path); ++ ++ err = request_firmware(&overlay->fw, overlay->path, NULL); ++ if (err != 0) ++ goto out_err; ++ ++ err = create_overlay(overlay, (void *)overlay->fw->data); ++ if (err != 0) ++ goto out_err; ++ ++ return count; ++ ++out_err: ++ ++ release_firmware(overlay->fw); ++ overlay->fw = NULL; ++ ++ overlay->path[0] = '\0'; ++ return err; ++} ++ ++static ssize_t cfs_overlay_item_status_show(struct config_item *item, ++ char *page) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ ++ return sprintf(page, "%s\n", ++ overlay->ov_id >= 0 ? "applied" : "unapplied"); ++} ++ ++CONFIGFS_ATTR(cfs_overlay_item_, path); ++CONFIGFS_ATTR_RO(cfs_overlay_item_, status); ++ ++static struct configfs_attribute *cfs_overlay_attrs[] = { ++ &cfs_overlay_item_attr_path, ++ &cfs_overlay_item_attr_status, ++ NULL, ++}; ++ ++ssize_t cfs_overlay_item_dtbo_read(struct config_item *item, ++ void *buf, size_t max_count) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ ++ pr_debug("%s: buf=%p max_count=%zu\n", __func__, ++ buf, max_count); ++ ++ if (overlay->dtbo == NULL) ++ return 0; ++ ++ /* copy if buffer provided */ ++ if (buf != NULL) { ++ /* the buffer must be large enough */ ++ if (overlay->dtbo_size > max_count) ++ return -ENOSPC; ++ ++ memcpy(buf, overlay->dtbo, overlay->dtbo_size); ++ } ++ ++ return overlay->dtbo_size; ++} ++ ++ssize_t cfs_overlay_item_dtbo_write(struct config_item *item, ++ const void *buf, size_t count) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ int err; ++ ++ /* if it's set do not allow changes */ ++ if (overlay->path[0] != '\0' || overlay->dtbo_size > 0) ++ return -EPERM; ++ ++ /* copy the contents */ ++ overlay->dtbo = kmemdup(buf, count, GFP_KERNEL); ++ if (overlay->dtbo == NULL) ++ return -ENOMEM; ++ ++ overlay->dtbo_size = count; ++ ++ err = create_overlay(overlay, overlay->dtbo); ++ if (err != 0) ++ goto out_err; ++ ++ return count; ++ ++out_err: ++ kfree(overlay->dtbo); ++ overlay->dtbo = NULL; ++ overlay->dtbo_size = 0; ++ ++ return err; ++} ++ ++CONFIGFS_BIN_ATTR(cfs_overlay_item_, dtbo, NULL, SZ_1M); ++ ++static struct configfs_bin_attribute *cfs_overlay_bin_attrs[] = { ++ &cfs_overlay_item_attr_dtbo, ++ NULL, ++}; ++ ++static void cfs_overlay_release(struct config_item *item) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ ++ if (overlay->ov_id >= 0) ++ of_overlay_destroy(overlay->ov_id); ++ if (overlay->fw) ++ release_firmware(overlay->fw); ++ /* kfree with NULL is safe */ ++ kfree(overlay->dtbo); ++ kfree(overlay); ++} ++ ++static struct configfs_item_operations cfs_overlay_item_ops = { ++ .release = cfs_overlay_release, ++}; ++ ++static struct config_item_type cfs_overlay_type = { ++ .ct_item_ops = &cfs_overlay_item_ops, ++ .ct_attrs = cfs_overlay_attrs, ++ .ct_bin_attrs = cfs_overlay_bin_attrs, ++ .ct_owner = THIS_MODULE, ++}; ++ ++static struct config_item *cfs_overlay_group_make_item( ++ struct config_group *group, const char *name) ++{ ++ struct cfs_overlay_item *overlay; ++ ++ overlay = kzalloc(sizeof(*overlay), GFP_KERNEL); ++ if (!overlay) ++ return ERR_PTR(-ENOMEM); ++ overlay->ov_id = -1; ++ ++ config_item_init_type_name(&overlay->item, name, &cfs_overlay_type); ++ return &overlay->item; ++} ++ ++static void cfs_overlay_group_drop_item(struct config_group *group, ++ struct config_item *item) ++{ ++ struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); ++ ++ config_item_put(&overlay->item); ++} ++ ++static struct configfs_group_operations overlays_ops = { ++ .make_item = cfs_overlay_group_make_item, ++ .drop_item = cfs_overlay_group_drop_item, ++}; ++ ++static struct config_item_type overlays_type = { ++ .ct_group_ops = &overlays_ops, ++ .ct_owner = THIS_MODULE, ++}; ++ ++static struct configfs_group_operations of_cfs_ops = { ++ /* empty - we don't allow anything to be created */ ++}; ++ ++static struct config_item_type of_cfs_type = { ++ .ct_group_ops = &of_cfs_ops, ++ .ct_owner = THIS_MODULE, ++}; ++ ++struct config_group of_cfs_overlay_group; ++ ++static struct configfs_subsystem of_cfs_subsys = { ++ .su_group = { ++ .cg_item = { ++ .ci_namebuf = "device-tree", ++ .ci_type = &of_cfs_type, ++ }, ++ }, ++ .su_mutex = __MUTEX_INITIALIZER(of_cfs_subsys.su_mutex), ++}; ++ ++static int __init of_cfs_init(void) ++{ ++ int ret; ++ ++ pr_info("%s\n", __func__); ++ ++ config_group_init(&of_cfs_subsys.su_group); ++ config_group_init_type_name(&of_cfs_overlay_group, "overlays", ++ &overlays_type); ++ configfs_add_default_group(&of_cfs_overlay_group, ++ &of_cfs_subsys.su_group); ++ ++ ret = configfs_register_subsystem(&of_cfs_subsys); ++ if (ret != 0) { ++ pr_err("%s: failed to register subsys\n", __func__); ++ goto out; ++ } ++ pr_info("%s: OK\n", __func__); ++out: ++ return ret; ++} ++late_initcall(of_cfs_init); diff --git a/target/linux/brcm2708/patches-4.9/950-0092-hci_h5-Don-t-send-conf_req-when-ACTIVE.patch b/target/linux/brcm2708/patches-4.9/950-0092-hci_h5-Don-t-send-conf_req-when-ACTIVE.patch new file mode 100644 index 000000000000..780a211c8c74 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0092-hci_h5-Don-t-send-conf_req-when-ACTIVE.patch @@ -0,0 +1,23 @@ +From 0224b0469a7f5c2ee6420aac66e89e3206029633 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 17 Dec 2015 13:37:07 +0000 +Subject: [PATCH] hci_h5: Don't send conf_req when ACTIVE + +Without this patch, a modem and kernel can continuously bombard each +other with conf_req and conf_rsp messages, in a demented game of tag. +--- + drivers/bluetooth/hci_h5.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/bluetooth/hci_h5.c ++++ b/drivers/bluetooth/hci_h5.c +@@ -310,7 +310,8 @@ static void h5_handle_internal_rx(struct + h5_link_control(hu, conf_req, 3); + } else if (memcmp(data, conf_req, 2) == 0) { + h5_link_control(hu, conf_rsp, 2); +- h5_link_control(hu, conf_req, 3); ++ if (h5->state != H5_ACTIVE) ++ h5_link_control(hu, conf_req, 3); + } else if (memcmp(data, conf_rsp, 2) == 0) { + if (H5_HDR_LEN(hdr) > 2) + h5->tx_win = (data[2] & 0x07); diff --git a/target/linux/brcm2708/patches-4.9/950-0093-config-Add-default-configs.patch b/target/linux/brcm2708/patches-4.9/950-0093-config-Add-default-configs.patch new file mode 100644 index 000000000000..da92f04b4c92 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0093-config-Add-default-configs.patch @@ -0,0 +1,2623 @@ +From 9455097dbb0c961edb6a47b451e18a985f5d9a3f Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Mon, 13 Apr 2015 17:16:29 +0100 +Subject: [PATCH] config: Add default configs + +--- + arch/arm/configs/bcm2709_defconfig | 1297 +++++++++++++++++++++++++++++++++++ + arch/arm/configs/bcmrpi_defconfig | 1308 ++++++++++++++++++++++++++++++++++++ + 2 files changed, 2605 insertions(+) + create mode 100644 arch/arm/configs/bcm2709_defconfig + create mode 100644 arch/arm/configs/bcmrpi_defconfig + +--- /dev/null ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -0,0 +1,1297 @@ ++CONFIG_LOCALVERSION="-v7" ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_SYSVIPC=y ++CONFIG_POSIX_MQUEUE=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_BSD_PROCESS_ACCT=y ++CONFIG_BSD_PROCESS_ACCT_V3=y ++CONFIG_TASKSTATS=y ++CONFIG_TASK_DELAY_ACCT=y ++CONFIG_TASK_XACCT=y ++CONFIG_TASK_IO_ACCOUNTING=y ++CONFIG_IKCONFIG=m ++CONFIG_IKCONFIG_PROC=y ++CONFIG_NMI_LOG_BUF_SHIFT=12 ++CONFIG_MEMCG=y ++CONFIG_BLK_CGROUP=y ++CONFIG_CGROUP_FREEZER=y ++CONFIG_CPUSETS=y ++CONFIG_CGROUP_DEVICE=y ++CONFIG_CGROUP_CPUACCT=y ++CONFIG_NAMESPACES=y ++CONFIG_USER_NS=y ++CONFIG_SCHED_AUTOGROUP=y ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_EMBEDDED=y ++# CONFIG_COMPAT_BRK is not set ++CONFIG_PROFILING=y ++CONFIG_OPROFILE=m ++CONFIG_KPROBES=y ++CONFIG_JUMP_LABEL=y ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODVERSIONS=y ++CONFIG_MODULE_SRCVERSION_ALL=y ++CONFIG_BLK_DEV_THROTTLING=y ++CONFIG_PARTITION_ADVANCED=y ++CONFIG_MAC_PARTITION=y ++CONFIG_CFQ_GROUP_IOSCHED=y ++CONFIG_ARCH_BCM=y ++CONFIG_ARCH_BCM2835=y ++# CONFIG_CACHE_L2X0 is not set ++CONFIG_SMP=y ++CONFIG_VMSPLIT_2G=y ++CONFIG_PREEMPT_VOLUNTARY=y ++CONFIG_AEABI=y ++# CONFIG_CPU_SW_DOMAIN_PAN is not set ++CONFIG_CLEANCACHE=y ++CONFIG_FRONTSWAP=y ++CONFIG_CMA=y ++CONFIG_ZSMALLOC=m ++CONFIG_PGTABLE_MAPPING=y ++CONFIG_UACCESS_WITH_MEMCPY=y ++CONFIG_SECCOMP=y ++# CONFIG_ATAGS is not set ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" ++CONFIG_CPU_FREQ=y ++CONFIG_CPU_FREQ_STAT=y ++CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y ++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y ++CONFIG_CPU_FREQ_GOV_USERSPACE=y ++CONFIG_CPU_FREQ_GOV_ONDEMAND=y ++CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y ++CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y ++CONFIG_VFP=y ++CONFIG_NEON=y ++CONFIG_KERNEL_MODE_NEON=y ++CONFIG_BINFMT_MISC=m ++# CONFIG_SUSPEND is not set ++CONFIG_PM=y ++CONFIG_NET=y ++CONFIG_PACKET=y ++CONFIG_UNIX=y ++CONFIG_XFRM_USER=y ++CONFIG_NET_KEY=m ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++CONFIG_IP_ADVANCED_ROUTER=y ++CONFIG_IP_MULTIPLE_TABLES=y ++CONFIG_IP_ROUTE_MULTIPATH=y ++CONFIG_IP_ROUTE_VERBOSE=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_RARP=y ++CONFIG_NET_IPIP=m ++CONFIG_NET_IPGRE_DEMUX=m ++CONFIG_NET_IPGRE=m ++CONFIG_IP_MROUTE=y ++CONFIG_IP_MROUTE_MULTIPLE_TABLES=y ++CONFIG_IP_PIMSM_V1=y ++CONFIG_IP_PIMSM_V2=y ++CONFIG_SYN_COOKIES=y ++CONFIG_INET_AH=m ++CONFIG_INET_ESP=m ++CONFIG_INET_IPCOMP=m ++CONFIG_INET_XFRM_MODE_TRANSPORT=m ++CONFIG_INET_XFRM_MODE_TUNNEL=m ++CONFIG_INET_XFRM_MODE_BEET=m ++CONFIG_INET_DIAG=m ++CONFIG_IPV6=m ++CONFIG_IPV6_ROUTER_PREF=y ++CONFIG_INET6_AH=m ++CONFIG_INET6_ESP=m ++CONFIG_INET6_IPCOMP=m ++CONFIG_IPV6_TUNNEL=m ++CONFIG_IPV6_MULTIPLE_TABLES=y ++CONFIG_IPV6_SUBTREES=y ++CONFIG_IPV6_MROUTE=y ++CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y ++CONFIG_IPV6_PIMSM_V2=y ++CONFIG_NETFILTER=y ++CONFIG_NF_CONNTRACK=m ++CONFIG_NF_CONNTRACK_ZONES=y ++CONFIG_NF_CONNTRACK_EVENTS=y ++CONFIG_NF_CONNTRACK_TIMESTAMP=y ++CONFIG_NF_CT_PROTO_DCCP=m ++CONFIG_NF_CT_PROTO_UDPLITE=m ++CONFIG_NF_CONNTRACK_AMANDA=m ++CONFIG_NF_CONNTRACK_FTP=m ++CONFIG_NF_CONNTRACK_H323=m ++CONFIG_NF_CONNTRACK_IRC=m ++CONFIG_NF_CONNTRACK_NETBIOS_NS=m ++CONFIG_NF_CONNTRACK_SNMP=m ++CONFIG_NF_CONNTRACK_PPTP=m ++CONFIG_NF_CONNTRACK_SANE=m ++CONFIG_NF_CONNTRACK_SIP=m ++CONFIG_NF_CONNTRACK_TFTP=m ++CONFIG_NF_CT_NETLINK=m ++CONFIG_NETFILTER_XT_SET=m ++CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m ++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m ++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m ++CONFIG_NETFILTER_XT_TARGET_DSCP=m ++CONFIG_NETFILTER_XT_TARGET_HMARK=m ++CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m ++CONFIG_NETFILTER_XT_TARGET_LED=m ++CONFIG_NETFILTER_XT_TARGET_LOG=m ++CONFIG_NETFILTER_XT_TARGET_MARK=m ++CONFIG_NETFILTER_XT_TARGET_NFLOG=m ++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m ++CONFIG_NETFILTER_XT_TARGET_NOTRACK=m ++CONFIG_NETFILTER_XT_TARGET_TEE=m ++CONFIG_NETFILTER_XT_TARGET_TPROXY=m ++CONFIG_NETFILTER_XT_TARGET_TRACE=m ++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m ++CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m ++CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m ++CONFIG_NETFILTER_XT_MATCH_BPF=m ++CONFIG_NETFILTER_XT_MATCH_CLUSTER=m ++CONFIG_NETFILTER_XT_MATCH_COMMENT=m ++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m ++CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m ++CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m ++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m ++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m ++CONFIG_NETFILTER_XT_MATCH_CPU=m ++CONFIG_NETFILTER_XT_MATCH_DCCP=m ++CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m ++CONFIG_NETFILTER_XT_MATCH_DSCP=m ++CONFIG_NETFILTER_XT_MATCH_ESP=m ++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m ++CONFIG_NETFILTER_XT_MATCH_HELPER=m ++CONFIG_NETFILTER_XT_MATCH_IPRANGE=m ++CONFIG_NETFILTER_XT_MATCH_IPVS=m ++CONFIG_NETFILTER_XT_MATCH_LENGTH=m ++CONFIG_NETFILTER_XT_MATCH_LIMIT=m ++CONFIG_NETFILTER_XT_MATCH_MAC=m ++CONFIG_NETFILTER_XT_MATCH_MARK=m ++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m ++CONFIG_NETFILTER_XT_MATCH_NFACCT=m ++CONFIG_NETFILTER_XT_MATCH_OSF=m ++CONFIG_NETFILTER_XT_MATCH_OWNER=m ++CONFIG_NETFILTER_XT_MATCH_POLICY=m ++CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m ++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m ++CONFIG_NETFILTER_XT_MATCH_QUOTA=m ++CONFIG_NETFILTER_XT_MATCH_RATEEST=m ++CONFIG_NETFILTER_XT_MATCH_REALM=m ++CONFIG_NETFILTER_XT_MATCH_RECENT=m ++CONFIG_NETFILTER_XT_MATCH_SOCKET=m ++CONFIG_NETFILTER_XT_MATCH_STATE=m ++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m ++CONFIG_NETFILTER_XT_MATCH_STRING=m ++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m ++CONFIG_NETFILTER_XT_MATCH_TIME=m ++CONFIG_NETFILTER_XT_MATCH_U32=m ++CONFIG_IP_SET=m ++CONFIG_IP_SET_BITMAP_IP=m ++CONFIG_IP_SET_BITMAP_IPMAC=m ++CONFIG_IP_SET_BITMAP_PORT=m ++CONFIG_IP_SET_HASH_IP=m ++CONFIG_IP_SET_HASH_IPPORT=m ++CONFIG_IP_SET_HASH_IPPORTIP=m ++CONFIG_IP_SET_HASH_IPPORTNET=m ++CONFIG_IP_SET_HASH_NET=m ++CONFIG_IP_SET_HASH_NETPORT=m ++CONFIG_IP_SET_HASH_NETIFACE=m ++CONFIG_IP_SET_LIST_SET=m ++CONFIG_IP_VS=m ++CONFIG_IP_VS_PROTO_TCP=y ++CONFIG_IP_VS_PROTO_UDP=y ++CONFIG_IP_VS_PROTO_ESP=y ++CONFIG_IP_VS_PROTO_AH=y ++CONFIG_IP_VS_PROTO_SCTP=y ++CONFIG_IP_VS_RR=m ++CONFIG_IP_VS_WRR=m ++CONFIG_IP_VS_LC=m ++CONFIG_IP_VS_WLC=m ++CONFIG_IP_VS_LBLC=m ++CONFIG_IP_VS_LBLCR=m ++CONFIG_IP_VS_DH=m ++CONFIG_IP_VS_SH=m ++CONFIG_IP_VS_SED=m ++CONFIG_IP_VS_NQ=m ++CONFIG_IP_VS_FTP=m ++CONFIG_IP_VS_PE_SIP=m ++CONFIG_NF_CONNTRACK_IPV4=m ++CONFIG_IP_NF_IPTABLES=m ++CONFIG_IP_NF_MATCH_AH=m ++CONFIG_IP_NF_MATCH_ECN=m ++CONFIG_IP_NF_MATCH_RPFILTER=m ++CONFIG_IP_NF_MATCH_TTL=m ++CONFIG_IP_NF_FILTER=m ++CONFIG_IP_NF_TARGET_REJECT=m ++CONFIG_IP_NF_NAT=m ++CONFIG_IP_NF_TARGET_MASQUERADE=m ++CONFIG_IP_NF_TARGET_NETMAP=m ++CONFIG_IP_NF_TARGET_REDIRECT=m ++CONFIG_IP_NF_MANGLE=m ++CONFIG_IP_NF_TARGET_CLUSTERIP=m ++CONFIG_IP_NF_TARGET_ECN=m ++CONFIG_IP_NF_TARGET_TTL=m ++CONFIG_IP_NF_RAW=m ++CONFIG_IP_NF_ARPTABLES=m ++CONFIG_IP_NF_ARPFILTER=m ++CONFIG_IP_NF_ARP_MANGLE=m ++CONFIG_NF_CONNTRACK_IPV6=m ++CONFIG_IP6_NF_IPTABLES=m ++CONFIG_IP6_NF_MATCH_AH=m ++CONFIG_IP6_NF_MATCH_EUI64=m ++CONFIG_IP6_NF_MATCH_FRAG=m ++CONFIG_IP6_NF_MATCH_OPTS=m ++CONFIG_IP6_NF_MATCH_HL=m ++CONFIG_IP6_NF_MATCH_IPV6HEADER=m ++CONFIG_IP6_NF_MATCH_MH=m ++CONFIG_IP6_NF_MATCH_RPFILTER=m ++CONFIG_IP6_NF_MATCH_RT=m ++CONFIG_IP6_NF_TARGET_HL=m ++CONFIG_IP6_NF_FILTER=m ++CONFIG_IP6_NF_TARGET_REJECT=m ++CONFIG_IP6_NF_MANGLE=m ++CONFIG_IP6_NF_RAW=m ++CONFIG_IP6_NF_NAT=m ++CONFIG_IP6_NF_TARGET_MASQUERADE=m ++CONFIG_IP6_NF_TARGET_NPT=m ++CONFIG_BRIDGE_NF_EBTABLES=m ++CONFIG_BRIDGE_EBT_BROUTE=m ++CONFIG_BRIDGE_EBT_T_FILTER=m ++CONFIG_BRIDGE_EBT_T_NAT=m ++CONFIG_BRIDGE_EBT_802_3=m ++CONFIG_BRIDGE_EBT_AMONG=m ++CONFIG_BRIDGE_EBT_ARP=m ++CONFIG_BRIDGE_EBT_IP=m ++CONFIG_BRIDGE_EBT_IP6=m ++CONFIG_BRIDGE_EBT_LIMIT=m ++CONFIG_BRIDGE_EBT_MARK=m ++CONFIG_BRIDGE_EBT_PKTTYPE=m ++CONFIG_BRIDGE_EBT_STP=m ++CONFIG_BRIDGE_EBT_VLAN=m ++CONFIG_BRIDGE_EBT_ARPREPLY=m ++CONFIG_BRIDGE_EBT_DNAT=m ++CONFIG_BRIDGE_EBT_MARK_T=m ++CONFIG_BRIDGE_EBT_REDIRECT=m ++CONFIG_BRIDGE_EBT_SNAT=m ++CONFIG_BRIDGE_EBT_LOG=m ++CONFIG_BRIDGE_EBT_NFLOG=m ++CONFIG_SCTP_COOKIE_HMAC_SHA1=y ++CONFIG_ATM=m ++CONFIG_L2TP=m ++CONFIG_L2TP_V3=y ++CONFIG_L2TP_IP=m ++CONFIG_L2TP_ETH=m ++CONFIG_BRIDGE=m ++CONFIG_VLAN_8021Q=m ++CONFIG_VLAN_8021Q_GVRP=y ++CONFIG_ATALK=m ++CONFIG_6LOWPAN=m ++CONFIG_IEEE802154=m ++CONFIG_IEEE802154_6LOWPAN=m ++CONFIG_MAC802154=m ++CONFIG_NET_SCHED=y ++CONFIG_NET_SCH_CBQ=m ++CONFIG_NET_SCH_HTB=m ++CONFIG_NET_SCH_HFSC=m ++CONFIG_NET_SCH_PRIO=m ++CONFIG_NET_SCH_MULTIQ=m ++CONFIG_NET_SCH_RED=m ++CONFIG_NET_SCH_SFB=m ++CONFIG_NET_SCH_SFQ=m ++CONFIG_NET_SCH_TEQL=m ++CONFIG_NET_SCH_TBF=m ++CONFIG_NET_SCH_GRED=m ++CONFIG_NET_SCH_DSMARK=m ++CONFIG_NET_SCH_NETEM=m ++CONFIG_NET_SCH_DRR=m ++CONFIG_NET_SCH_MQPRIO=m ++CONFIG_NET_SCH_CHOKE=m ++CONFIG_NET_SCH_QFQ=m ++CONFIG_NET_SCH_CODEL=m ++CONFIG_NET_SCH_FQ_CODEL=m ++CONFIG_NET_SCH_INGRESS=m ++CONFIG_NET_SCH_PLUG=m ++CONFIG_NET_CLS_BASIC=m ++CONFIG_NET_CLS_TCINDEX=m ++CONFIG_NET_CLS_ROUTE4=m ++CONFIG_NET_CLS_FW=m ++CONFIG_NET_CLS_U32=m ++CONFIG_CLS_U32_MARK=y ++CONFIG_NET_CLS_RSVP=m ++CONFIG_NET_CLS_RSVP6=m ++CONFIG_NET_CLS_FLOW=m ++CONFIG_NET_CLS_CGROUP=m ++CONFIG_NET_EMATCH=y ++CONFIG_NET_EMATCH_CMP=m ++CONFIG_NET_EMATCH_NBYTE=m ++CONFIG_NET_EMATCH_U32=m ++CONFIG_NET_EMATCH_META=m ++CONFIG_NET_EMATCH_TEXT=m ++CONFIG_NET_EMATCH_IPSET=m ++CONFIG_NET_CLS_ACT=y ++CONFIG_NET_ACT_POLICE=m ++CONFIG_NET_ACT_GACT=m ++CONFIG_GACT_PROB=y ++CONFIG_NET_ACT_MIRRED=m ++CONFIG_NET_ACT_IPT=m ++CONFIG_NET_ACT_NAT=m ++CONFIG_NET_ACT_PEDIT=m ++CONFIG_NET_ACT_SIMP=m ++CONFIG_NET_ACT_SKBEDIT=m ++CONFIG_NET_ACT_CSUM=m ++CONFIG_BATMAN_ADV=m ++CONFIG_OPENVSWITCH=m ++CONFIG_NET_PKTGEN=m ++CONFIG_HAMRADIO=y ++CONFIG_AX25=m ++CONFIG_NETROM=m ++CONFIG_ROSE=m ++CONFIG_MKISS=m ++CONFIG_6PACK=m ++CONFIG_BPQETHER=m ++CONFIG_BAYCOM_SER_FDX=m ++CONFIG_BAYCOM_SER_HDX=m ++CONFIG_YAM=m ++CONFIG_CAN=m ++CONFIG_CAN_VCAN=m ++CONFIG_CAN_MCP251X=m ++CONFIG_IRDA=m ++CONFIG_IRLAN=m ++CONFIG_IRNET=m ++CONFIG_IRCOMM=m ++CONFIG_IRDA_ULTRA=y ++CONFIG_IRDA_CACHE_LAST_LSAP=y ++CONFIG_IRDA_FAST_RR=y ++CONFIG_IRTTY_SIR=m ++CONFIG_KINGSUN_DONGLE=m ++CONFIG_KSDAZZLE_DONGLE=m ++CONFIG_KS959_DONGLE=m ++CONFIG_USB_IRDA=m ++CONFIG_SIGMATEL_FIR=m ++CONFIG_MCS_FIR=m ++CONFIG_BT=m ++CONFIG_BT_RFCOMM=m ++CONFIG_BT_RFCOMM_TTY=y ++CONFIG_BT_BNEP=m ++CONFIG_BT_BNEP_MC_FILTER=y ++CONFIG_BT_BNEP_PROTO_FILTER=y ++CONFIG_BT_HIDP=m ++CONFIG_BT_6LOWPAN=m ++CONFIG_BT_HCIBTUSB=m ++CONFIG_BT_HCIUART=m ++CONFIG_BT_HCIUART_3WIRE=y ++CONFIG_BT_HCIUART_BCM=y ++CONFIG_BT_HCIBCM203X=m ++CONFIG_BT_HCIBPA10X=m ++CONFIG_BT_HCIBFUSB=m ++CONFIG_BT_HCIVHCI=m ++CONFIG_BT_MRVL=m ++CONFIG_BT_MRVL_SDIO=m ++CONFIG_BT_ATH3K=m ++CONFIG_BT_WILINK=m ++CONFIG_CFG80211=m ++CONFIG_MAC80211=m ++CONFIG_MAC80211_MESH=y ++CONFIG_WIMAX=m ++CONFIG_RFKILL=m ++CONFIG_RFKILL_INPUT=y ++CONFIG_NET_9P=m ++CONFIG_NFC=m ++CONFIG_DEVTMPFS=y ++CONFIG_DEVTMPFS_MOUNT=y ++CONFIG_DMA_CMA=y ++CONFIG_CMA_SIZE_MBYTES=5 ++CONFIG_MTD=m ++CONFIG_MTD_BLOCK=m ++CONFIG_MTD_NAND=m ++CONFIG_MTD_UBI=m ++CONFIG_OF_CONFIGFS=y ++CONFIG_ZRAM=m ++CONFIG_BLK_DEV_LOOP=y ++CONFIG_BLK_DEV_CRYPTOLOOP=m ++CONFIG_BLK_DEV_DRBD=m ++CONFIG_BLK_DEV_NBD=m ++CONFIG_BLK_DEV_RAM=y ++CONFIG_CDROM_PKTCDVD=m ++CONFIG_ATA_OVER_ETH=m ++CONFIG_EEPROM_AT24=m ++CONFIG_TI_ST=m ++CONFIG_SCSI=y ++# CONFIG_SCSI_PROC_FS is not set ++CONFIG_BLK_DEV_SD=y ++CONFIG_CHR_DEV_ST=m ++CONFIG_CHR_DEV_OSST=m ++CONFIG_BLK_DEV_SR=m ++CONFIG_CHR_DEV_SG=m ++CONFIG_SCSI_ISCSI_ATTRS=y ++CONFIG_ISCSI_TCP=m ++CONFIG_ISCSI_BOOT_SYSFS=m ++CONFIG_MD=y ++CONFIG_MD_LINEAR=m ++CONFIG_MD_RAID0=m ++CONFIG_BLK_DEV_DM=m ++CONFIG_DM_CRYPT=m ++CONFIG_DM_SNAPSHOT=m ++CONFIG_DM_THIN_PROVISIONING=m ++CONFIG_DM_MIRROR=m ++CONFIG_DM_LOG_USERSPACE=m ++CONFIG_DM_RAID=m ++CONFIG_DM_ZERO=m ++CONFIG_DM_DELAY=m ++CONFIG_NETDEVICES=y ++CONFIG_BONDING=m ++CONFIG_DUMMY=m ++CONFIG_IFB=m ++CONFIG_MACVLAN=m ++CONFIG_VXLAN=m ++CONFIG_NETCONSOLE=m ++CONFIG_TUN=m ++CONFIG_VETH=m ++CONFIG_ENC28J60=m ++CONFIG_QCA7000=m ++CONFIG_MDIO_BITBANG=m ++CONFIG_PPP=m ++CONFIG_PPP_BSDCOMP=m ++CONFIG_PPP_DEFLATE=m ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_MPPE=m ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPPOATM=m ++CONFIG_PPPOE=m ++CONFIG_PPPOL2TP=m ++CONFIG_PPP_ASYNC=m ++CONFIG_PPP_SYNC_TTY=m ++CONFIG_SLIP=m ++CONFIG_SLIP_COMPRESSED=y ++CONFIG_SLIP_SMART=y ++CONFIG_USB_CATC=m ++CONFIG_USB_KAWETH=m ++CONFIG_USB_PEGASUS=m ++CONFIG_USB_RTL8150=m ++CONFIG_USB_RTL8152=m ++CONFIG_USB_USBNET=y ++CONFIG_USB_NET_AX8817X=m ++CONFIG_USB_NET_AX88179_178A=m ++CONFIG_USB_NET_CDCETHER=m ++CONFIG_USB_NET_CDC_EEM=m ++CONFIG_USB_NET_CDC_NCM=m ++CONFIG_USB_NET_HUAWEI_CDC_NCM=m ++CONFIG_USB_NET_CDC_MBIM=m ++CONFIG_USB_NET_DM9601=m ++CONFIG_USB_NET_SR9700=m ++CONFIG_USB_NET_SR9800=m ++CONFIG_USB_NET_SMSC75XX=m ++CONFIG_USB_NET_SMSC95XX=y ++CONFIG_USB_NET_GL620A=m ++CONFIG_USB_NET_NET1080=m ++CONFIG_USB_NET_PLUSB=m ++CONFIG_USB_NET_MCS7830=m ++CONFIG_USB_NET_CDC_SUBSET=m ++CONFIG_USB_ALI_M5632=y ++CONFIG_USB_AN2720=y ++CONFIG_USB_EPSON2888=y ++CONFIG_USB_KC2190=y ++CONFIG_USB_NET_ZAURUS=m ++CONFIG_USB_NET_CX82310_ETH=m ++CONFIG_USB_NET_KALMIA=m ++CONFIG_USB_NET_QMI_WWAN=m ++CONFIG_USB_HSO=m ++CONFIG_USB_NET_INT51X1=m ++CONFIG_USB_IPHETH=m ++CONFIG_USB_SIERRA_NET=m ++CONFIG_USB_VL600=m ++CONFIG_ATH9K=m ++CONFIG_ATH9K_HTC=m ++CONFIG_CARL9170=m ++CONFIG_ATH6KL=m ++CONFIG_ATH6KL_USB=m ++CONFIG_AR5523=m ++CONFIG_AT76C50X_USB=m ++CONFIG_B43=m ++# CONFIG_B43_PHY_N is not set ++CONFIG_B43LEGACY=m ++CONFIG_BRCMFMAC=m ++CONFIG_BRCMFMAC_USB=y ++CONFIG_HOSTAP=m ++CONFIG_P54_COMMON=m ++CONFIG_P54_USB=m ++CONFIG_LIBERTAS=m ++CONFIG_LIBERTAS_USB=m ++CONFIG_LIBERTAS_SDIO=m ++CONFIG_LIBERTAS_THINFIRM=m ++CONFIG_LIBERTAS_THINFIRM_USB=m ++CONFIG_MWIFIEX=m ++CONFIG_MWIFIEX_SDIO=m ++CONFIG_MT7601U=m ++CONFIG_RT2X00=m ++CONFIG_RT2500USB=m ++CONFIG_RT73USB=m ++CONFIG_RT2800USB=m ++CONFIG_RT2800USB_RT3573=y ++CONFIG_RT2800USB_RT53XX=y ++CONFIG_RT2800USB_RT55XX=y ++CONFIG_RT2800USB_UNKNOWN=y ++CONFIG_RTL8187=m ++CONFIG_RTL8192CU=m ++CONFIG_USB_ZD1201=m ++CONFIG_ZD1211RW=m ++CONFIG_MAC80211_HWSIM=m ++CONFIG_USB_NET_RNDIS_WLAN=m ++CONFIG_WIMAX_I2400M_USB=m ++CONFIG_IEEE802154_AT86RF230=m ++CONFIG_IEEE802154_MRF24J40=m ++CONFIG_IEEE802154_CC2520=m ++CONFIG_INPUT_POLLDEV=m ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_JOYDEV=m ++CONFIG_INPUT_EVDEV=m ++# CONFIG_KEYBOARD_ATKBD is not set ++CONFIG_KEYBOARD_GPIO=m ++# CONFIG_INPUT_MOUSE is not set ++CONFIG_INPUT_JOYSTICK=y ++CONFIG_JOYSTICK_IFORCE=m ++CONFIG_JOYSTICK_IFORCE_USB=y ++CONFIG_JOYSTICK_XPAD=m ++CONFIG_JOYSTICK_XPAD_FF=y ++CONFIG_JOYSTICK_XPAD_LEDS=y ++CONFIG_JOYSTICK_RPISENSE=m ++CONFIG_INPUT_TOUCHSCREEN=y ++CONFIG_TOUCHSCREEN_ADS7846=m ++CONFIG_TOUCHSCREEN_EGALAX=m ++CONFIG_TOUCHSCREEN_EKTF2127=m ++CONFIG_TOUCHSCREEN_RPI_FT5406=m ++CONFIG_TOUCHSCREEN_USB_COMPOSITE=m ++CONFIG_TOUCHSCREEN_STMPE=m ++CONFIG_INPUT_MISC=y ++CONFIG_INPUT_AD714X=m ++CONFIG_INPUT_ATI_REMOTE2=m ++CONFIG_INPUT_KEYSPAN_REMOTE=m ++CONFIG_INPUT_POWERMATE=m ++CONFIG_INPUT_YEALINK=m ++CONFIG_INPUT_CM109=m ++CONFIG_INPUT_UINPUT=m ++CONFIG_INPUT_GPIO_ROTARY_ENCODER=m ++CONFIG_INPUT_ADXL34X=m ++CONFIG_INPUT_CMA3000=m ++CONFIG_SERIO=m ++CONFIG_SERIO_RAW=m ++CONFIG_GAMEPORT=m ++CONFIG_GAMEPORT_NS558=m ++CONFIG_GAMEPORT_L4=m ++CONFIG_BRCM_CHAR_DRIVERS=y ++CONFIG_BCM_VC_CMA=y ++CONFIG_BCM_VCIO=y ++CONFIG_BCM_VC_SM=y ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_DEVKMEM is not set ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set ++CONFIG_SERIAL_8250_CONSOLE=y ++# CONFIG_SERIAL_8250_DMA is not set ++CONFIG_SERIAL_8250_NR_UARTS=1 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=0 ++CONFIG_SERIAL_8250_EXTENDED=y ++CONFIG_SERIAL_8250_SHARE_IRQ=y ++CONFIG_SERIAL_8250_BCM2835AUX=y ++CONFIG_SERIAL_OF_PLATFORM=y ++CONFIG_SERIAL_AMBA_PL011=y ++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y ++CONFIG_SERIAL_SC16IS7XX=m ++CONFIG_SERIAL_SC16IS7XX_SPI=y ++CONFIG_TTY_PRINTK=y ++CONFIG_HW_RANDOM=y ++CONFIG_RAW_DRIVER=y ++CONFIG_I2C=y ++CONFIG_I2C_CHARDEV=m ++CONFIG_I2C_MUX_PCA954x=m ++CONFIG_I2C_BCM2708=m ++CONFIG_I2C_BCM2835=m ++CONFIG_I2C_GPIO=m ++CONFIG_SPI=y ++CONFIG_SPI_BCM2835=m ++CONFIG_SPI_BCM2835AUX=m ++CONFIG_SPI_SPIDEV=y ++CONFIG_PPS=m ++CONFIG_PPS_CLIENT_LDISC=m ++CONFIG_PPS_CLIENT_GPIO=m ++CONFIG_GPIO_SYSFS=y ++CONFIG_GPIO_BCM_VIRT=y ++CONFIG_GPIO_ARIZONA=m ++CONFIG_GPIO_STMPE=y ++CONFIG_GPIO_MCP23S08=m ++CONFIG_W1=m ++CONFIG_W1_MASTER_DS2490=m ++CONFIG_W1_MASTER_DS2482=m ++CONFIG_W1_MASTER_DS1WM=m ++CONFIG_W1_MASTER_GPIO=m ++CONFIG_W1_SLAVE_THERM=m ++CONFIG_W1_SLAVE_SMEM=m ++CONFIG_W1_SLAVE_DS2408=m ++CONFIG_W1_SLAVE_DS2413=m ++CONFIG_W1_SLAVE_DS2406=m ++CONFIG_W1_SLAVE_DS2423=m ++CONFIG_W1_SLAVE_DS2431=m ++CONFIG_W1_SLAVE_DS2433=m ++CONFIG_W1_SLAVE_DS2760=m ++CONFIG_W1_SLAVE_DS2780=m ++CONFIG_W1_SLAVE_DS2781=m ++CONFIG_W1_SLAVE_DS28E04=m ++CONFIG_W1_SLAVE_BQ27000=m ++CONFIG_POWER_RESET=y ++CONFIG_POWER_RESET_GPIO=y ++CONFIG_BATTERY_DS2760=m ++CONFIG_HWMON=m ++CONFIG_SENSORS_LM75=m ++CONFIG_SENSORS_SHT21=m ++CONFIG_SENSORS_SHTC1=m ++CONFIG_SENSORS_INA2XX=m ++CONFIG_THERMAL=y ++CONFIG_THERMAL_BCM2835=y ++CONFIG_WATCHDOG=y ++CONFIG_BCM2835_WDT=y ++CONFIG_UCB1400_CORE=m ++CONFIG_MFD_STMPE=y ++CONFIG_STMPE_SPI=y ++CONFIG_MFD_ARIZONA_I2C=m ++CONFIG_MFD_ARIZONA_SPI=m ++CONFIG_MFD_WM5102=y ++CONFIG_MEDIA_SUPPORT=m ++CONFIG_MEDIA_CAMERA_SUPPORT=y ++CONFIG_MEDIA_ANALOG_TV_SUPPORT=y ++CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y ++CONFIG_MEDIA_RADIO_SUPPORT=y ++CONFIG_MEDIA_RC_SUPPORT=y ++CONFIG_MEDIA_CONTROLLER=y ++CONFIG_LIRC=m ++CONFIG_RC_DEVICES=y ++CONFIG_RC_ATI_REMOTE=m ++CONFIG_IR_IMON=m ++CONFIG_IR_MCEUSB=m ++CONFIG_IR_REDRAT3=m ++CONFIG_IR_STREAMZAP=m ++CONFIG_IR_IGUANA=m ++CONFIG_IR_TTUSBIR=m ++CONFIG_RC_LOOPBACK=m ++CONFIG_IR_GPIO_CIR=m ++CONFIG_MEDIA_USB_SUPPORT=y ++CONFIG_USB_VIDEO_CLASS=m ++CONFIG_USB_M5602=m ++CONFIG_USB_STV06XX=m ++CONFIG_USB_GL860=m ++CONFIG_USB_GSPCA_BENQ=m ++CONFIG_USB_GSPCA_CONEX=m ++CONFIG_USB_GSPCA_CPIA1=m ++CONFIG_USB_GSPCA_DTCS033=m ++CONFIG_USB_GSPCA_ETOMS=m ++CONFIG_USB_GSPCA_FINEPIX=m ++CONFIG_USB_GSPCA_JEILINJ=m ++CONFIG_USB_GSPCA_JL2005BCD=m ++CONFIG_USB_GSPCA_KINECT=m ++CONFIG_USB_GSPCA_KONICA=m ++CONFIG_USB_GSPCA_MARS=m ++CONFIG_USB_GSPCA_MR97310A=m ++CONFIG_USB_GSPCA_NW80X=m ++CONFIG_USB_GSPCA_OV519=m ++CONFIG_USB_GSPCA_OV534=m ++CONFIG_USB_GSPCA_OV534_9=m ++CONFIG_USB_GSPCA_PAC207=m ++CONFIG_USB_GSPCA_PAC7302=m ++CONFIG_USB_GSPCA_PAC7311=m ++CONFIG_USB_GSPCA_SE401=m ++CONFIG_USB_GSPCA_SN9C2028=m ++CONFIG_USB_GSPCA_SN9C20X=m ++CONFIG_USB_GSPCA_SONIXB=m ++CONFIG_USB_GSPCA_SONIXJ=m ++CONFIG_USB_GSPCA_SPCA500=m ++CONFIG_USB_GSPCA_SPCA501=m ++CONFIG_USB_GSPCA_SPCA505=m ++CONFIG_USB_GSPCA_SPCA506=m ++CONFIG_USB_GSPCA_SPCA508=m ++CONFIG_USB_GSPCA_SPCA561=m ++CONFIG_USB_GSPCA_SPCA1528=m ++CONFIG_USB_GSPCA_SQ905=m ++CONFIG_USB_GSPCA_SQ905C=m ++CONFIG_USB_GSPCA_SQ930X=m ++CONFIG_USB_GSPCA_STK014=m ++CONFIG_USB_GSPCA_STK1135=m ++CONFIG_USB_GSPCA_STV0680=m ++CONFIG_USB_GSPCA_SUNPLUS=m ++CONFIG_USB_GSPCA_T613=m ++CONFIG_USB_GSPCA_TOPRO=m ++CONFIG_USB_GSPCA_TV8532=m ++CONFIG_USB_GSPCA_VC032X=m ++CONFIG_USB_GSPCA_VICAM=m ++CONFIG_USB_GSPCA_XIRLINK_CIT=m ++CONFIG_USB_GSPCA_ZC3XX=m ++CONFIG_USB_PWC=m ++CONFIG_VIDEO_CPIA2=m ++CONFIG_USB_ZR364XX=m ++CONFIG_USB_STKWEBCAM=m ++CONFIG_USB_S2255=m ++CONFIG_VIDEO_USBTV=m ++CONFIG_VIDEO_PVRUSB2=m ++CONFIG_VIDEO_HDPVR=m ++CONFIG_VIDEO_USBVISION=m ++CONFIG_VIDEO_STK1160_COMMON=m ++CONFIG_VIDEO_STK1160_AC97=y ++CONFIG_VIDEO_GO7007=m ++CONFIG_VIDEO_GO7007_USB=m ++CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m ++CONFIG_VIDEO_AU0828=m ++CONFIG_VIDEO_AU0828_RC=y ++CONFIG_VIDEO_CX231XX=m ++CONFIG_VIDEO_CX231XX_ALSA=m ++CONFIG_VIDEO_CX231XX_DVB=m ++CONFIG_VIDEO_TM6000=m ++CONFIG_VIDEO_TM6000_ALSA=m ++CONFIG_VIDEO_TM6000_DVB=m ++CONFIG_DVB_USB=m ++CONFIG_DVB_USB_A800=m ++CONFIG_DVB_USB_DIBUSB_MB=m ++CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y ++CONFIG_DVB_USB_DIBUSB_MC=m ++CONFIG_DVB_USB_DIB0700=m ++CONFIG_DVB_USB_UMT_010=m ++CONFIG_DVB_USB_CXUSB=m ++CONFIG_DVB_USB_M920X=m ++CONFIG_DVB_USB_DIGITV=m ++CONFIG_DVB_USB_VP7045=m ++CONFIG_DVB_USB_VP702X=m ++CONFIG_DVB_USB_GP8PSK=m ++CONFIG_DVB_USB_NOVA_T_USB2=m ++CONFIG_DVB_USB_TTUSB2=m ++CONFIG_DVB_USB_DTT200U=m ++CONFIG_DVB_USB_OPERA1=m ++CONFIG_DVB_USB_AF9005=m ++CONFIG_DVB_USB_AF9005_REMOTE=m ++CONFIG_DVB_USB_PCTV452E=m ++CONFIG_DVB_USB_DW2102=m ++CONFIG_DVB_USB_CINERGY_T2=m ++CONFIG_DVB_USB_DTV5100=m ++CONFIG_DVB_USB_FRIIO=m ++CONFIG_DVB_USB_AZ6027=m ++CONFIG_DVB_USB_TECHNISAT_USB2=m ++CONFIG_DVB_USB_V2=m ++CONFIG_DVB_USB_AF9015=m ++CONFIG_DVB_USB_AF9035=m ++CONFIG_DVB_USB_ANYSEE=m ++CONFIG_DVB_USB_AU6610=m ++CONFIG_DVB_USB_AZ6007=m ++CONFIG_DVB_USB_CE6230=m ++CONFIG_DVB_USB_EC168=m ++CONFIG_DVB_USB_GL861=m ++CONFIG_DVB_USB_LME2510=m ++CONFIG_DVB_USB_MXL111SF=m ++CONFIG_DVB_USB_RTL28XXU=m ++CONFIG_DVB_USB_DVBSKY=m ++CONFIG_SMS_USB_DRV=m ++CONFIG_DVB_B2C2_FLEXCOP_USB=m ++CONFIG_DVB_AS102=m ++CONFIG_VIDEO_EM28XX=m ++CONFIG_VIDEO_EM28XX_V4L2=m ++CONFIG_VIDEO_EM28XX_ALSA=m ++CONFIG_VIDEO_EM28XX_DVB=m ++CONFIG_V4L_PLATFORM_DRIVERS=y ++CONFIG_VIDEO_BCM2835=y ++CONFIG_VIDEO_BCM2835_MMAL=m ++CONFIG_RADIO_SI470X=y ++CONFIG_USB_SI470X=m ++CONFIG_I2C_SI470X=m ++CONFIG_RADIO_SI4713=m ++CONFIG_I2C_SI4713=m ++CONFIG_USB_MR800=m ++CONFIG_USB_DSBR=m ++CONFIG_RADIO_SHARK=m ++CONFIG_RADIO_SHARK2=m ++CONFIG_USB_KEENE=m ++CONFIG_USB_MA901=m ++CONFIG_RADIO_TEA5764=m ++CONFIG_RADIO_SAA7706H=m ++CONFIG_RADIO_TEF6862=m ++CONFIG_RADIO_WL1273=m ++CONFIG_RADIO_WL128X=m ++# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set ++CONFIG_VIDEO_UDA1342=m ++CONFIG_VIDEO_SONY_BTF_MPX=m ++CONFIG_VIDEO_TVP5150=m ++CONFIG_VIDEO_TW2804=m ++CONFIG_VIDEO_TW9903=m ++CONFIG_VIDEO_TW9906=m ++CONFIG_VIDEO_OV7640=m ++CONFIG_VIDEO_MT9V011=m ++CONFIG_DRM=m ++CONFIG_DRM_LOAD_EDID_FIRMWARE=y ++CONFIG_DRM_UDL=m ++CONFIG_DRM_VC4=m ++CONFIG_FB=y ++CONFIG_FB_BCM2708=y ++CONFIG_FB_UDL=m ++CONFIG_FB_SSD1307=m ++CONFIG_FB_RPISENSE=m ++# CONFIG_BACKLIGHT_GENERIC is not set ++CONFIG_BACKLIGHT_RPI=m ++CONFIG_BACKLIGHT_GPIO=m ++CONFIG_FRAMEBUFFER_CONSOLE=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++CONFIG_SOUND=y ++CONFIG_SND=m ++CONFIG_SND_SEQUENCER=m ++CONFIG_SND_SEQ_DUMMY=m ++CONFIG_SND_MIXER_OSS=m ++CONFIG_SND_PCM_OSS=m ++CONFIG_SND_SEQUENCER_OSS=y ++CONFIG_SND_HRTIMER=m ++CONFIG_SND_DUMMY=m ++CONFIG_SND_ALOOP=m ++CONFIG_SND_VIRMIDI=m ++CONFIG_SND_MTPAV=m ++CONFIG_SND_SERIAL_U16550=m ++CONFIG_SND_MPU401=m ++CONFIG_SND_BCM2835=m ++CONFIG_SND_USB_AUDIO=m ++CONFIG_SND_USB_UA101=m ++CONFIG_SND_USB_CAIAQ=m ++CONFIG_SND_USB_CAIAQ_INPUT=y ++CONFIG_SND_USB_6FIRE=m ++CONFIG_SND_SOC=m ++CONFIG_SND_BCM2835_SOC_I2S=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m ++CONFIG_SND_BCM2708_SOC_RPI_DAC=m ++CONFIG_SND_BCM2708_SOC_RPI_PROTO=m ++CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m ++CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI=m ++CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m ++CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI=m ++CONFIG_SND_BCM2708_SOC_RASPIDAC3=m ++CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m ++CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m ++CONFIG_SND_DIGIDAC1_SOUNDCARD=m ++CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m ++CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m ++CONFIG_SND_PISOUND=m ++CONFIG_SND_SOC_ADAU1701=m ++CONFIG_SND_SOC_AK4554=m ++CONFIG_SND_SOC_WM8804_I2C=m ++CONFIG_SND_SIMPLE_CARD=m ++CONFIG_SOUND_PRIME=m ++CONFIG_HIDRAW=y ++CONFIG_UHID=m ++CONFIG_HID_A4TECH=m ++CONFIG_HID_ACRUX=m ++CONFIG_HID_APPLE=m ++CONFIG_HID_BELKIN=m ++CONFIG_HID_BETOP_FF=m ++CONFIG_HID_CHERRY=m ++CONFIG_HID_CHICONY=m ++CONFIG_HID_CYPRESS=m ++CONFIG_HID_DRAGONRISE=m ++CONFIG_HID_EMS_FF=m ++CONFIG_HID_ELECOM=m ++CONFIG_HID_ELO=m ++CONFIG_HID_EZKEY=m ++CONFIG_HID_GEMBIRD=m ++CONFIG_HID_HOLTEK=m ++CONFIG_HID_KEYTOUCH=m ++CONFIG_HID_KYE=m ++CONFIG_HID_UCLOGIC=m ++CONFIG_HID_WALTOP=m ++CONFIG_HID_GYRATION=m ++CONFIG_HID_TWINHAN=m ++CONFIG_HID_KENSINGTON=m ++CONFIG_HID_LCPOWER=m ++CONFIG_HID_LOGITECH=m ++CONFIG_HID_LOGITECH_DJ=m ++CONFIG_LOGITECH_FF=y ++CONFIG_LOGIRUMBLEPAD2_FF=y ++CONFIG_LOGIG940_FF=y ++CONFIG_HID_MAGICMOUSE=m ++CONFIG_HID_MICROSOFT=m ++CONFIG_HID_MONTEREY=m ++CONFIG_HID_MULTITOUCH=m ++CONFIG_HID_NTRIG=m ++CONFIG_HID_ORTEK=m ++CONFIG_HID_PANTHERLORD=m ++CONFIG_HID_PETALYNX=m ++CONFIG_HID_PICOLCD=m ++CONFIG_HID_ROCCAT=m ++CONFIG_HID_SAMSUNG=m ++CONFIG_HID_SONY=m ++CONFIG_HID_SPEEDLINK=m ++CONFIG_HID_SUNPLUS=m ++CONFIG_HID_GREENASIA=m ++CONFIG_HID_SMARTJOYPLUS=m ++CONFIG_HID_TOPSEED=m ++CONFIG_HID_THINGM=m ++CONFIG_HID_THRUSTMASTER=m ++CONFIG_HID_WACOM=m ++CONFIG_HID_WIIMOTE=m ++CONFIG_HID_XINMO=m ++CONFIG_HID_ZEROPLUS=m ++CONFIG_HID_ZYDACRON=m ++CONFIG_HID_PID=y ++CONFIG_USB_HIDDEV=y ++CONFIG_USB=y ++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y ++CONFIG_USB_MON=m ++CONFIG_USB_DWCOTG=y ++CONFIG_USB_PRINTER=m ++CONFIG_USB_STORAGE=y ++CONFIG_USB_STORAGE_REALTEK=m ++CONFIG_USB_STORAGE_DATAFAB=m ++CONFIG_USB_STORAGE_FREECOM=m ++CONFIG_USB_STORAGE_ISD200=m ++CONFIG_USB_STORAGE_USBAT=m ++CONFIG_USB_STORAGE_SDDR09=m ++CONFIG_USB_STORAGE_SDDR55=m ++CONFIG_USB_STORAGE_JUMPSHOT=m ++CONFIG_USB_STORAGE_ALAUDA=m ++CONFIG_USB_STORAGE_ONETOUCH=m ++CONFIG_USB_STORAGE_KARMA=m ++CONFIG_USB_STORAGE_CYPRESS_ATACB=m ++CONFIG_USB_STORAGE_ENE_UB6250=m ++CONFIG_USB_MDC800=m ++CONFIG_USB_MICROTEK=m ++CONFIG_USBIP_CORE=m ++CONFIG_USBIP_VHCI_HCD=m ++CONFIG_USBIP_HOST=m ++CONFIG_USB_SERIAL=m ++CONFIG_USB_SERIAL_GENERIC=y ++CONFIG_USB_SERIAL_AIRCABLE=m ++CONFIG_USB_SERIAL_ARK3116=m ++CONFIG_USB_SERIAL_BELKIN=m ++CONFIG_USB_SERIAL_CH341=m ++CONFIG_USB_SERIAL_WHITEHEAT=m ++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m ++CONFIG_USB_SERIAL_CP210X=m ++CONFIG_USB_SERIAL_CYPRESS_M8=m ++CONFIG_USB_SERIAL_EMPEG=m ++CONFIG_USB_SERIAL_FTDI_SIO=m ++CONFIG_USB_SERIAL_VISOR=m ++CONFIG_USB_SERIAL_IPAQ=m ++CONFIG_USB_SERIAL_IR=m ++CONFIG_USB_SERIAL_EDGEPORT=m ++CONFIG_USB_SERIAL_EDGEPORT_TI=m ++CONFIG_USB_SERIAL_F81232=m ++CONFIG_USB_SERIAL_GARMIN=m ++CONFIG_USB_SERIAL_IPW=m ++CONFIG_USB_SERIAL_IUU=m ++CONFIG_USB_SERIAL_KEYSPAN_PDA=m ++CONFIG_USB_SERIAL_KEYSPAN=m ++CONFIG_USB_SERIAL_KLSI=m ++CONFIG_USB_SERIAL_KOBIL_SCT=m ++CONFIG_USB_SERIAL_MCT_U232=m ++CONFIG_USB_SERIAL_METRO=m ++CONFIG_USB_SERIAL_MOS7720=m ++CONFIG_USB_SERIAL_MOS7840=m ++CONFIG_USB_SERIAL_NAVMAN=m ++CONFIG_USB_SERIAL_PL2303=m ++CONFIG_USB_SERIAL_OTI6858=m ++CONFIG_USB_SERIAL_QCAUX=m ++CONFIG_USB_SERIAL_QUALCOMM=m ++CONFIG_USB_SERIAL_SPCP8X5=m ++CONFIG_USB_SERIAL_SAFE=m ++CONFIG_USB_SERIAL_SIERRAWIRELESS=m ++CONFIG_USB_SERIAL_SYMBOL=m ++CONFIG_USB_SERIAL_TI=m ++CONFIG_USB_SERIAL_CYBERJACK=m ++CONFIG_USB_SERIAL_XIRCOM=m ++CONFIG_USB_SERIAL_OPTION=m ++CONFIG_USB_SERIAL_OMNINET=m ++CONFIG_USB_SERIAL_OPTICON=m ++CONFIG_USB_SERIAL_XSENS_MT=m ++CONFIG_USB_SERIAL_WISHBONE=m ++CONFIG_USB_SERIAL_SSU100=m ++CONFIG_USB_SERIAL_QT2=m ++CONFIG_USB_SERIAL_DEBUG=m ++CONFIG_USB_EMI62=m ++CONFIG_USB_EMI26=m ++CONFIG_USB_ADUTUX=m ++CONFIG_USB_SEVSEG=m ++CONFIG_USB_RIO500=m ++CONFIG_USB_LEGOTOWER=m ++CONFIG_USB_LCD=m ++CONFIG_USB_CYPRESS_CY7C63=m ++CONFIG_USB_CYTHERM=m ++CONFIG_USB_IDMOUSE=m ++CONFIG_USB_FTDI_ELAN=m ++CONFIG_USB_APPLEDISPLAY=m ++CONFIG_USB_LD=m ++CONFIG_USB_TRANCEVIBRATOR=m ++CONFIG_USB_IOWARRIOR=m ++CONFIG_USB_TEST=m ++CONFIG_USB_ISIGHTFW=m ++CONFIG_USB_YUREX=m ++CONFIG_USB_ATM=m ++CONFIG_USB_SPEEDTOUCH=m ++CONFIG_USB_CXACRU=m ++CONFIG_USB_UEAGLEATM=m ++CONFIG_USB_XUSBATM=m ++CONFIG_MMC=y ++CONFIG_MMC_BLOCK_MINORS=32 ++CONFIG_MMC_BCM2835=y ++CONFIG_MMC_BCM2835_DMA=y ++CONFIG_MMC_BCM2835_SDHOST=y ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_PLTFM=y ++CONFIG_MMC_SPI=m ++CONFIG_LEDS_CLASS=y ++CONFIG_LEDS_GPIO=y ++CONFIG_LEDS_TRIGGER_TIMER=y ++CONFIG_LEDS_TRIGGER_ONESHOT=y ++CONFIG_LEDS_TRIGGER_HEARTBEAT=y ++CONFIG_LEDS_TRIGGER_BACKLIGHT=y ++CONFIG_LEDS_TRIGGER_CPU=y ++CONFIG_LEDS_TRIGGER_GPIO=y ++CONFIG_LEDS_TRIGGER_DEFAULT_ON=y ++CONFIG_LEDS_TRIGGER_TRANSIENT=m ++CONFIG_LEDS_TRIGGER_CAMERA=m ++CONFIG_LEDS_TRIGGER_INPUT=y ++CONFIG_LEDS_TRIGGER_PANIC=y ++CONFIG_RTC_CLASS=y ++# CONFIG_RTC_HCTOSYS is not set ++CONFIG_RTC_DRV_ABX80X=m ++CONFIG_RTC_DRV_DS1307=m ++CONFIG_RTC_DRV_DS1374=m ++CONFIG_RTC_DRV_DS1672=m ++CONFIG_RTC_DRV_MAX6900=m ++CONFIG_RTC_DRV_RS5C372=m ++CONFIG_RTC_DRV_ISL1208=m ++CONFIG_RTC_DRV_ISL12022=m ++CONFIG_RTC_DRV_X1205=m ++CONFIG_RTC_DRV_PCF8523=m ++CONFIG_RTC_DRV_PCF8563=m ++CONFIG_RTC_DRV_PCF8583=m ++CONFIG_RTC_DRV_M41T80=m ++CONFIG_RTC_DRV_BQ32K=m ++CONFIG_RTC_DRV_S35390A=m ++CONFIG_RTC_DRV_FM3130=m ++CONFIG_RTC_DRV_RX8581=m ++CONFIG_RTC_DRV_RX8025=m ++CONFIG_RTC_DRV_EM3027=m ++CONFIG_RTC_DRV_M41T93=m ++CONFIG_RTC_DRV_M41T94=m ++CONFIG_RTC_DRV_DS1302=m ++CONFIG_RTC_DRV_DS1305=m ++CONFIG_RTC_DRV_DS1390=m ++CONFIG_RTC_DRV_R9701=m ++CONFIG_RTC_DRV_RX4581=m ++CONFIG_RTC_DRV_RS5C348=m ++CONFIG_RTC_DRV_MAX6902=m ++CONFIG_RTC_DRV_PCF2123=m ++CONFIG_RTC_DRV_DS3232=m ++CONFIG_RTC_DRV_PCF2127=m ++CONFIG_RTC_DRV_RV3029C2=m ++CONFIG_DMADEVICES=y ++CONFIG_DMA_BCM2835=y ++CONFIG_DMA_BCM2708=y ++CONFIG_UIO=m ++CONFIG_UIO_PDRV_GENIRQ=m ++CONFIG_STAGING=y ++CONFIG_PRISM2_USB=m ++CONFIG_R8712U=m ++CONFIG_R8188EU=m ++CONFIG_VT6656=m ++CONFIG_SPEAKUP=m ++CONFIG_SPEAKUP_SYNTH_SOFT=m ++CONFIG_STAGING_MEDIA=y ++CONFIG_LIRC_STAGING=y ++CONFIG_LIRC_IMON=m ++CONFIG_LIRC_RPI=m ++CONFIG_LIRC_SASEM=m ++CONFIG_LIRC_SERIAL=m ++CONFIG_FB_TFT=m ++CONFIG_FB_TFT_AGM1264K_FL=m ++CONFIG_FB_TFT_BD663474=m ++CONFIG_FB_TFT_HX8340BN=m ++CONFIG_FB_TFT_HX8347D=m ++CONFIG_FB_TFT_HX8353D=m ++CONFIG_FB_TFT_HX8357D=m ++CONFIG_FB_TFT_ILI9163=m ++CONFIG_FB_TFT_ILI9320=m ++CONFIG_FB_TFT_ILI9325=m ++CONFIG_FB_TFT_ILI9340=m ++CONFIG_FB_TFT_ILI9341=m ++CONFIG_FB_TFT_ILI9481=m ++CONFIG_FB_TFT_ILI9486=m ++CONFIG_FB_TFT_PCD8544=m ++CONFIG_FB_TFT_RA8875=m ++CONFIG_FB_TFT_S6D02A1=m ++CONFIG_FB_TFT_S6D1121=m ++CONFIG_FB_TFT_SSD1289=m ++CONFIG_FB_TFT_SSD1306=m ++CONFIG_FB_TFT_SSD1331=m ++CONFIG_FB_TFT_SSD1351=m ++CONFIG_FB_TFT_ST7735R=m ++CONFIG_FB_TFT_TINYLCD=m ++CONFIG_FB_TFT_TLS8204=m ++CONFIG_FB_TFT_UC1701=m ++CONFIG_FB_TFT_UPD161704=m ++CONFIG_FB_TFT_WATTEROTT=m ++CONFIG_FB_FLEX=m ++CONFIG_FB_TFT_FBTFT_DEVICE=m ++CONFIG_MAILBOX=y ++CONFIG_BCM2835_MBOX=y ++# CONFIG_IOMMU_SUPPORT is not set ++CONFIG_RASPBERRYPI_POWER=y ++CONFIG_EXTCON=m ++CONFIG_EXTCON_ARIZONA=m ++CONFIG_IIO=m ++CONFIG_IIO_BUFFER=y ++CONFIG_IIO_BUFFER_CB=m ++CONFIG_IIO_KFIFO_BUF=m ++CONFIG_MCP320X=m ++CONFIG_MCP3422=m ++CONFIG_DHT11=m ++CONFIG_HTU21=m ++CONFIG_PWM_BCM2835=m ++CONFIG_PWM_PCA9685=m ++CONFIG_RASPBERRYPI_FIRMWARE=y ++CONFIG_EXT4_FS=y ++CONFIG_EXT4_FS_POSIX_ACL=y ++CONFIG_EXT4_FS_SECURITY=y ++CONFIG_REISERFS_FS=m ++CONFIG_REISERFS_FS_XATTR=y ++CONFIG_REISERFS_FS_POSIX_ACL=y ++CONFIG_REISERFS_FS_SECURITY=y ++CONFIG_JFS_FS=m ++CONFIG_JFS_POSIX_ACL=y ++CONFIG_JFS_SECURITY=y ++CONFIG_JFS_STATISTICS=y ++CONFIG_XFS_FS=m ++CONFIG_XFS_QUOTA=y ++CONFIG_XFS_POSIX_ACL=y ++CONFIG_XFS_RT=y ++CONFIG_GFS2_FS=m ++CONFIG_OCFS2_FS=m ++CONFIG_BTRFS_FS=m ++CONFIG_BTRFS_FS_POSIX_ACL=y ++CONFIG_NILFS2_FS=m ++CONFIG_F2FS_FS=y ++CONFIG_FANOTIFY=y ++CONFIG_QFMT_V1=m ++CONFIG_QFMT_V2=m ++CONFIG_AUTOFS4_FS=y ++CONFIG_FUSE_FS=m ++CONFIG_CUSE=m ++CONFIG_OVERLAY_FS=m ++CONFIG_FSCACHE=y ++CONFIG_FSCACHE_STATS=y ++CONFIG_FSCACHE_HISTOGRAM=y ++CONFIG_CACHEFILES=y ++CONFIG_ISO9660_FS=m ++CONFIG_JOLIET=y ++CONFIG_ZISOFS=y ++CONFIG_UDF_FS=m ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_IOCHARSET="ascii" ++CONFIG_NTFS_FS=m ++CONFIG_NTFS_RW=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++CONFIG_ECRYPT_FS=m ++CONFIG_HFS_FS=m ++CONFIG_HFSPLUS_FS=m ++CONFIG_JFFS2_FS=m ++CONFIG_JFFS2_SUMMARY=y ++CONFIG_UBIFS_FS=m ++CONFIG_SQUASHFS=m ++CONFIG_SQUASHFS_XATTR=y ++CONFIG_SQUASHFS_LZO=y ++CONFIG_SQUASHFS_XZ=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3_ACL=y ++CONFIG_NFS_V4=y ++CONFIG_NFS_SWAP=y ++CONFIG_ROOT_NFS=y ++CONFIG_NFS_FSCACHE=y ++CONFIG_NFSD=m ++CONFIG_NFSD_V3_ACL=y ++CONFIG_NFSD_V4=y ++CONFIG_CIFS=m ++CONFIG_CIFS_WEAK_PW_HASH=y ++CONFIG_CIFS_UPCALL=y ++CONFIG_CIFS_XATTR=y ++CONFIG_CIFS_POSIX=y ++CONFIG_CIFS_ACL=y ++CONFIG_CIFS_DFS_UPCALL=y ++CONFIG_CIFS_SMB2=y ++CONFIG_CIFS_FSCACHE=y ++CONFIG_9P_FS=m ++CONFIG_9P_FS_POSIX_ACL=y ++CONFIG_NLS_DEFAULT="utf8" ++CONFIG_NLS_CODEPAGE_437=y ++CONFIG_NLS_CODEPAGE_737=m ++CONFIG_NLS_CODEPAGE_775=m ++CONFIG_NLS_CODEPAGE_850=m ++CONFIG_NLS_CODEPAGE_852=m ++CONFIG_NLS_CODEPAGE_855=m ++CONFIG_NLS_CODEPAGE_857=m ++CONFIG_NLS_CODEPAGE_860=m ++CONFIG_NLS_CODEPAGE_861=m ++CONFIG_NLS_CODEPAGE_862=m ++CONFIG_NLS_CODEPAGE_863=m ++CONFIG_NLS_CODEPAGE_864=m ++CONFIG_NLS_CODEPAGE_865=m ++CONFIG_NLS_CODEPAGE_866=m ++CONFIG_NLS_CODEPAGE_869=m ++CONFIG_NLS_CODEPAGE_936=m ++CONFIG_NLS_CODEPAGE_950=m ++CONFIG_NLS_CODEPAGE_932=m ++CONFIG_NLS_CODEPAGE_949=m ++CONFIG_NLS_CODEPAGE_874=m ++CONFIG_NLS_ISO8859_8=m ++CONFIG_NLS_CODEPAGE_1250=m ++CONFIG_NLS_CODEPAGE_1251=m ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=m ++CONFIG_NLS_ISO8859_2=m ++CONFIG_NLS_ISO8859_3=m ++CONFIG_NLS_ISO8859_4=m ++CONFIG_NLS_ISO8859_5=m ++CONFIG_NLS_ISO8859_6=m ++CONFIG_NLS_ISO8859_7=m ++CONFIG_NLS_ISO8859_9=m ++CONFIG_NLS_ISO8859_13=m ++CONFIG_NLS_ISO8859_14=m ++CONFIG_NLS_ISO8859_15=m ++CONFIG_NLS_KOI8_R=m ++CONFIG_NLS_KOI8_U=m ++CONFIG_DLM=m ++CONFIG_PRINTK_TIME=y ++CONFIG_BOOT_PRINTK_DELAY=y ++CONFIG_DEBUG_MEMORY_INIT=y ++CONFIG_DETECT_HUNG_TASK=y ++CONFIG_TIMER_STATS=y ++CONFIG_LATENCYTOP=y ++CONFIG_IRQSOFF_TRACER=y ++CONFIG_SCHED_TRACER=y ++CONFIG_STACK_TRACER=y ++CONFIG_BLK_DEV_IO_TRACE=y ++# CONFIG_KPROBE_EVENT is not set ++CONFIG_FUNCTION_PROFILER=y ++CONFIG_KGDB=y ++CONFIG_KGDB_KDB=y ++CONFIG_KDB_KEYBOARD=y ++CONFIG_CRYPTO_USER=m ++CONFIG_CRYPTO_CBC=y ++CONFIG_CRYPTO_CTS=m ++CONFIG_CRYPTO_XTS=m ++CONFIG_CRYPTO_XCBC=m ++CONFIG_CRYPTO_TGR192=m ++CONFIG_CRYPTO_WP512=m ++CONFIG_CRYPTO_CAST5=m ++CONFIG_CRYPTO_DES=y ++CONFIG_CRYPTO_USER_API_SKCIPHER=m ++# CONFIG_CRYPTO_HW is not set ++CONFIG_ARM_CRYPTO=y ++CONFIG_CRYPTO_SHA1_ARM_NEON=m ++CONFIG_CRYPTO_AES_ARM_BS=m ++CONFIG_CRC_ITU_T=y ++CONFIG_LIBCRC32C=y +--- /dev/null ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -0,0 +1,1308 @@ ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_SYSVIPC=y ++CONFIG_POSIX_MQUEUE=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_BSD_PROCESS_ACCT=y ++CONFIG_BSD_PROCESS_ACCT_V3=y ++CONFIG_TASKSTATS=y ++CONFIG_TASK_DELAY_ACCT=y ++CONFIG_TASK_XACCT=y ++CONFIG_TASK_IO_ACCOUNTING=y ++CONFIG_IKCONFIG=m ++CONFIG_IKCONFIG_PROC=y ++CONFIG_NMI_LOG_BUF_SHIFT=12 ++CONFIG_MEMCG=y ++CONFIG_BLK_CGROUP=y ++CONFIG_CGROUP_FREEZER=y ++CONFIG_CPUSETS=y ++CONFIG_CGROUP_DEVICE=y ++CONFIG_CGROUP_CPUACCT=y ++CONFIG_NAMESPACES=y ++CONFIG_USER_NS=y ++CONFIG_SCHED_AUTOGROUP=y ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_EMBEDDED=y ++# CONFIG_COMPAT_BRK is not set ++CONFIG_PROFILING=y ++CONFIG_OPROFILE=m ++CONFIG_KPROBES=y ++CONFIG_JUMP_LABEL=y ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODVERSIONS=y ++CONFIG_MODULE_SRCVERSION_ALL=y ++CONFIG_BLK_DEV_THROTTLING=y ++CONFIG_PARTITION_ADVANCED=y ++CONFIG_MAC_PARTITION=y ++CONFIG_CFQ_GROUP_IOSCHED=y ++CONFIG_ARCH_MULTI_V6=y ++# CONFIG_ARCH_MULTI_V7 is not set ++CONFIG_ARCH_BCM=y ++CONFIG_ARCH_BCM2835=y ++# CONFIG_CACHE_L2X0 is not set ++CONFIG_PREEMPT_VOLUNTARY=y ++CONFIG_AEABI=y ++# CONFIG_CPU_SW_DOMAIN_PAN is not set ++CONFIG_CLEANCACHE=y ++CONFIG_FRONTSWAP=y ++CONFIG_CMA=y ++CONFIG_ZSMALLOC=m ++CONFIG_PGTABLE_MAPPING=y ++CONFIG_UACCESS_WITH_MEMCPY=y ++CONFIG_SECCOMP=y ++# CONFIG_ATAGS is not set ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" ++CONFIG_CPU_FREQ=y ++CONFIG_CPU_FREQ_STAT=y ++CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y ++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y ++CONFIG_CPU_FREQ_GOV_USERSPACE=y ++CONFIG_CPU_FREQ_GOV_ONDEMAND=y ++CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y ++CONFIG_VFP=y ++CONFIG_BINFMT_MISC=m ++# CONFIG_SUSPEND is not set ++CONFIG_PM=y ++CONFIG_NET=y ++CONFIG_PACKET=y ++CONFIG_UNIX=y ++CONFIG_XFRM_USER=y ++CONFIG_NET_KEY=m ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++CONFIG_IP_ADVANCED_ROUTER=y ++CONFIG_IP_MULTIPLE_TABLES=y ++CONFIG_IP_ROUTE_MULTIPATH=y ++CONFIG_IP_ROUTE_VERBOSE=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_RARP=y ++CONFIG_NET_IPIP=m ++CONFIG_NET_IPGRE_DEMUX=m ++CONFIG_NET_IPGRE=m ++CONFIG_IP_MROUTE=y ++CONFIG_IP_MROUTE_MULTIPLE_TABLES=y ++CONFIG_IP_PIMSM_V1=y ++CONFIG_IP_PIMSM_V2=y ++CONFIG_SYN_COOKIES=y ++CONFIG_INET_AH=m ++CONFIG_INET_ESP=m ++CONFIG_INET_IPCOMP=m ++CONFIG_INET_XFRM_MODE_TRANSPORT=m ++CONFIG_INET_XFRM_MODE_TUNNEL=m ++CONFIG_INET_XFRM_MODE_BEET=m ++CONFIG_INET_DIAG=m ++CONFIG_IPV6=m ++CONFIG_IPV6_ROUTER_PREF=y ++CONFIG_INET6_AH=m ++CONFIG_INET6_ESP=m ++CONFIG_INET6_IPCOMP=m ++CONFIG_IPV6_TUNNEL=m ++CONFIG_IPV6_MULTIPLE_TABLES=y ++CONFIG_IPV6_SUBTREES=y ++CONFIG_IPV6_MROUTE=y ++CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y ++CONFIG_IPV6_PIMSM_V2=y ++CONFIG_NETFILTER=y ++CONFIG_NF_CONNTRACK=m ++CONFIG_NF_CONNTRACK_ZONES=y ++CONFIG_NF_CONNTRACK_EVENTS=y ++CONFIG_NF_CONNTRACK_TIMESTAMP=y ++CONFIG_NF_CT_PROTO_DCCP=m ++CONFIG_NF_CT_PROTO_UDPLITE=m ++CONFIG_NF_CONNTRACK_AMANDA=m ++CONFIG_NF_CONNTRACK_FTP=m ++CONFIG_NF_CONNTRACK_H323=m ++CONFIG_NF_CONNTRACK_IRC=m ++CONFIG_NF_CONNTRACK_NETBIOS_NS=m ++CONFIG_NF_CONNTRACK_SNMP=m ++CONFIG_NF_CONNTRACK_PPTP=m ++CONFIG_NF_CONNTRACK_SANE=m ++CONFIG_NF_CONNTRACK_SIP=m ++CONFIG_NF_CONNTRACK_TFTP=m ++CONFIG_NF_CT_NETLINK=m ++CONFIG_NETFILTER_XT_SET=m ++CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m ++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m ++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m ++CONFIG_NETFILTER_XT_TARGET_DSCP=m ++CONFIG_NETFILTER_XT_TARGET_HMARK=m ++CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m ++CONFIG_NETFILTER_XT_TARGET_LED=m ++CONFIG_NETFILTER_XT_TARGET_LOG=m ++CONFIG_NETFILTER_XT_TARGET_MARK=m ++CONFIG_NETFILTER_XT_TARGET_NFLOG=m ++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m ++CONFIG_NETFILTER_XT_TARGET_NOTRACK=m ++CONFIG_NETFILTER_XT_TARGET_TEE=m ++CONFIG_NETFILTER_XT_TARGET_TPROXY=m ++CONFIG_NETFILTER_XT_TARGET_TRACE=m ++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m ++CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m ++CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m ++CONFIG_NETFILTER_XT_MATCH_BPF=m ++CONFIG_NETFILTER_XT_MATCH_CLUSTER=m ++CONFIG_NETFILTER_XT_MATCH_COMMENT=m ++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m ++CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m ++CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m ++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m ++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m ++CONFIG_NETFILTER_XT_MATCH_CPU=m ++CONFIG_NETFILTER_XT_MATCH_DCCP=m ++CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m ++CONFIG_NETFILTER_XT_MATCH_DSCP=m ++CONFIG_NETFILTER_XT_MATCH_ESP=m ++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m ++CONFIG_NETFILTER_XT_MATCH_HELPER=m ++CONFIG_NETFILTER_XT_MATCH_IPRANGE=m ++CONFIG_NETFILTER_XT_MATCH_IPVS=m ++CONFIG_NETFILTER_XT_MATCH_LENGTH=m ++CONFIG_NETFILTER_XT_MATCH_LIMIT=m ++CONFIG_NETFILTER_XT_MATCH_MAC=m ++CONFIG_NETFILTER_XT_MATCH_MARK=m ++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m ++CONFIG_NETFILTER_XT_MATCH_NFACCT=m ++CONFIG_NETFILTER_XT_MATCH_OSF=m ++CONFIG_NETFILTER_XT_MATCH_OWNER=m ++CONFIG_NETFILTER_XT_MATCH_POLICY=m ++CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m ++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m ++CONFIG_NETFILTER_XT_MATCH_QUOTA=m ++CONFIG_NETFILTER_XT_MATCH_RATEEST=m ++CONFIG_NETFILTER_XT_MATCH_REALM=m ++CONFIG_NETFILTER_XT_MATCH_RECENT=m ++CONFIG_NETFILTER_XT_MATCH_SOCKET=m ++CONFIG_NETFILTER_XT_MATCH_STATE=m ++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m ++CONFIG_NETFILTER_XT_MATCH_STRING=m ++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m ++CONFIG_NETFILTER_XT_MATCH_TIME=m ++CONFIG_NETFILTER_XT_MATCH_U32=m ++CONFIG_IP_SET=m ++CONFIG_IP_SET_BITMAP_IP=m ++CONFIG_IP_SET_BITMAP_IPMAC=m ++CONFIG_IP_SET_BITMAP_PORT=m ++CONFIG_IP_SET_HASH_IP=m ++CONFIG_IP_SET_HASH_IPPORT=m ++CONFIG_IP_SET_HASH_IPPORTIP=m ++CONFIG_IP_SET_HASH_IPPORTNET=m ++CONFIG_IP_SET_HASH_NET=m ++CONFIG_IP_SET_HASH_NETPORT=m ++CONFIG_IP_SET_HASH_NETIFACE=m ++CONFIG_IP_SET_LIST_SET=m ++CONFIG_IP_VS=m ++CONFIG_IP_VS_PROTO_TCP=y ++CONFIG_IP_VS_PROTO_UDP=y ++CONFIG_IP_VS_PROTO_ESP=y ++CONFIG_IP_VS_PROTO_AH=y ++CONFIG_IP_VS_PROTO_SCTP=y ++CONFIG_IP_VS_RR=m ++CONFIG_IP_VS_WRR=m ++CONFIG_IP_VS_LC=m ++CONFIG_IP_VS_WLC=m ++CONFIG_IP_VS_LBLC=m ++CONFIG_IP_VS_LBLCR=m ++CONFIG_IP_VS_DH=m ++CONFIG_IP_VS_SH=m ++CONFIG_IP_VS_SED=m ++CONFIG_IP_VS_NQ=m ++CONFIG_IP_VS_FTP=m ++CONFIG_IP_VS_PE_SIP=m ++CONFIG_NF_CONNTRACK_IPV4=m ++CONFIG_IP_NF_IPTABLES=m ++CONFIG_IP_NF_MATCH_AH=m ++CONFIG_IP_NF_MATCH_ECN=m ++CONFIG_IP_NF_MATCH_RPFILTER=m ++CONFIG_IP_NF_MATCH_TTL=m ++CONFIG_IP_NF_FILTER=m ++CONFIG_IP_NF_TARGET_REJECT=m ++CONFIG_IP_NF_NAT=m ++CONFIG_IP_NF_TARGET_MASQUERADE=m ++CONFIG_IP_NF_TARGET_NETMAP=m ++CONFIG_IP_NF_TARGET_REDIRECT=m ++CONFIG_IP_NF_MANGLE=m ++CONFIG_IP_NF_TARGET_CLUSTERIP=m ++CONFIG_IP_NF_TARGET_ECN=m ++CONFIG_IP_NF_TARGET_TTL=m ++CONFIG_IP_NF_RAW=m ++CONFIG_IP_NF_ARPTABLES=m ++CONFIG_IP_NF_ARPFILTER=m ++CONFIG_IP_NF_ARP_MANGLE=m ++CONFIG_NF_CONNTRACK_IPV6=m ++CONFIG_IP6_NF_IPTABLES=m ++CONFIG_IP6_NF_MATCH_AH=m ++CONFIG_IP6_NF_MATCH_EUI64=m ++CONFIG_IP6_NF_MATCH_FRAG=m ++CONFIG_IP6_NF_MATCH_OPTS=m ++CONFIG_IP6_NF_MATCH_HL=m ++CONFIG_IP6_NF_MATCH_IPV6HEADER=m ++CONFIG_IP6_NF_MATCH_MH=m ++CONFIG_IP6_NF_MATCH_RPFILTER=m ++CONFIG_IP6_NF_MATCH_RT=m ++CONFIG_IP6_NF_TARGET_HL=m ++CONFIG_IP6_NF_FILTER=m ++CONFIG_IP6_NF_TARGET_REJECT=m ++CONFIG_IP6_NF_MANGLE=m ++CONFIG_IP6_NF_RAW=m ++CONFIG_IP6_NF_NAT=m ++CONFIG_IP6_NF_TARGET_MASQUERADE=m ++CONFIG_IP6_NF_TARGET_NPT=m ++CONFIG_BRIDGE_NF_EBTABLES=m ++CONFIG_BRIDGE_EBT_BROUTE=m ++CONFIG_BRIDGE_EBT_T_FILTER=m ++CONFIG_BRIDGE_EBT_T_NAT=m ++CONFIG_BRIDGE_EBT_802_3=m ++CONFIG_BRIDGE_EBT_AMONG=m ++CONFIG_BRIDGE_EBT_ARP=m ++CONFIG_BRIDGE_EBT_IP=m ++CONFIG_BRIDGE_EBT_IP6=m ++CONFIG_BRIDGE_EBT_LIMIT=m ++CONFIG_BRIDGE_EBT_MARK=m ++CONFIG_BRIDGE_EBT_PKTTYPE=m ++CONFIG_BRIDGE_EBT_STP=m ++CONFIG_BRIDGE_EBT_VLAN=m ++CONFIG_BRIDGE_EBT_ARPREPLY=m ++CONFIG_BRIDGE_EBT_DNAT=m ++CONFIG_BRIDGE_EBT_MARK_T=m ++CONFIG_BRIDGE_EBT_REDIRECT=m ++CONFIG_BRIDGE_EBT_SNAT=m ++CONFIG_BRIDGE_EBT_LOG=m ++CONFIG_BRIDGE_EBT_NFLOG=m ++CONFIG_SCTP_COOKIE_HMAC_SHA1=y ++CONFIG_ATM=m ++CONFIG_L2TP=m ++CONFIG_L2TP_V3=y ++CONFIG_L2TP_IP=m ++CONFIG_L2TP_ETH=m ++CONFIG_BRIDGE=m ++CONFIG_VLAN_8021Q=m ++CONFIG_VLAN_8021Q_GVRP=y ++CONFIG_ATALK=m ++CONFIG_6LOWPAN=m ++CONFIG_IEEE802154=m ++CONFIG_IEEE802154_6LOWPAN=m ++CONFIG_MAC802154=m ++CONFIG_NET_SCHED=y ++CONFIG_NET_SCH_CBQ=m ++CONFIG_NET_SCH_HTB=m ++CONFIG_NET_SCH_HFSC=m ++CONFIG_NET_SCH_PRIO=m ++CONFIG_NET_SCH_MULTIQ=m ++CONFIG_NET_SCH_RED=m ++CONFIG_NET_SCH_SFB=m ++CONFIG_NET_SCH_SFQ=m ++CONFIG_NET_SCH_TEQL=m ++CONFIG_NET_SCH_TBF=m ++CONFIG_NET_SCH_GRED=m ++CONFIG_NET_SCH_DSMARK=m ++CONFIG_NET_SCH_NETEM=m ++CONFIG_NET_SCH_DRR=m ++CONFIG_NET_SCH_MQPRIO=m ++CONFIG_NET_SCH_CHOKE=m ++CONFIG_NET_SCH_QFQ=m ++CONFIG_NET_SCH_CODEL=m ++CONFIG_NET_SCH_FQ_CODEL=m ++CONFIG_NET_SCH_INGRESS=m ++CONFIG_NET_SCH_PLUG=m ++CONFIG_NET_CLS_BASIC=m ++CONFIG_NET_CLS_TCINDEX=m ++CONFIG_NET_CLS_ROUTE4=m ++CONFIG_NET_CLS_FW=m ++CONFIG_NET_CLS_U32=m ++CONFIG_CLS_U32_MARK=y ++CONFIG_NET_CLS_RSVP=m ++CONFIG_NET_CLS_RSVP6=m ++CONFIG_NET_CLS_FLOW=m ++CONFIG_NET_CLS_CGROUP=m ++CONFIG_NET_EMATCH=y ++CONFIG_NET_EMATCH_CMP=m ++CONFIG_NET_EMATCH_NBYTE=m ++CONFIG_NET_EMATCH_U32=m ++CONFIG_NET_EMATCH_META=m ++CONFIG_NET_EMATCH_TEXT=m ++CONFIG_NET_EMATCH_IPSET=m ++CONFIG_NET_CLS_ACT=y ++CONFIG_NET_ACT_POLICE=m ++CONFIG_NET_ACT_GACT=m ++CONFIG_GACT_PROB=y ++CONFIG_NET_ACT_MIRRED=m ++CONFIG_NET_ACT_IPT=m ++CONFIG_NET_ACT_NAT=m ++CONFIG_NET_ACT_PEDIT=m ++CONFIG_NET_ACT_SIMP=m ++CONFIG_NET_ACT_SKBEDIT=m ++CONFIG_NET_ACT_CSUM=m ++CONFIG_BATMAN_ADV=m ++CONFIG_OPENVSWITCH=m ++CONFIG_NET_PKTGEN=m ++CONFIG_HAMRADIO=y ++CONFIG_AX25=m ++CONFIG_NETROM=m ++CONFIG_ROSE=m ++CONFIG_MKISS=m ++CONFIG_6PACK=m ++CONFIG_BPQETHER=m ++CONFIG_BAYCOM_SER_FDX=m ++CONFIG_BAYCOM_SER_HDX=m ++CONFIG_YAM=m ++CONFIG_CAN=m ++CONFIG_CAN_VCAN=m ++CONFIG_CAN_MCP251X=m ++CONFIG_IRDA=m ++CONFIG_IRLAN=m ++CONFIG_IRNET=m ++CONFIG_IRCOMM=m ++CONFIG_IRDA_ULTRA=y ++CONFIG_IRDA_CACHE_LAST_LSAP=y ++CONFIG_IRDA_FAST_RR=y ++CONFIG_IRTTY_SIR=m ++CONFIG_KINGSUN_DONGLE=m ++CONFIG_KSDAZZLE_DONGLE=m ++CONFIG_KS959_DONGLE=m ++CONFIG_USB_IRDA=m ++CONFIG_SIGMATEL_FIR=m ++CONFIG_MCS_FIR=m ++CONFIG_BT=m ++CONFIG_BT_RFCOMM=m ++CONFIG_BT_RFCOMM_TTY=y ++CONFIG_BT_BNEP=m ++CONFIG_BT_BNEP_MC_FILTER=y ++CONFIG_BT_BNEP_PROTO_FILTER=y ++CONFIG_BT_HIDP=m ++CONFIG_BT_6LOWPAN=m ++CONFIG_BT_HCIBTUSB=m ++CONFIG_BT_HCIUART=m ++CONFIG_BT_HCIUART_3WIRE=y ++CONFIG_BT_HCIUART_BCM=y ++CONFIG_BT_HCIBCM203X=m ++CONFIG_BT_HCIBPA10X=m ++CONFIG_BT_HCIBFUSB=m ++CONFIG_BT_HCIVHCI=m ++CONFIG_BT_MRVL=m ++CONFIG_BT_MRVL_SDIO=m ++CONFIG_BT_ATH3K=m ++CONFIG_BT_WILINK=m ++CONFIG_CFG80211=m ++CONFIG_MAC80211=m ++CONFIG_MAC80211_MESH=y ++CONFIG_WIMAX=m ++CONFIG_RFKILL=m ++CONFIG_RFKILL_INPUT=y ++CONFIG_NET_9P=m ++CONFIG_NFC=m ++CONFIG_DEVTMPFS=y ++CONFIG_DEVTMPFS_MOUNT=y ++CONFIG_DMA_CMA=y ++CONFIG_CMA_SIZE_MBYTES=5 ++CONFIG_MTD=m ++CONFIG_MTD_BLOCK=m ++CONFIG_MTD_NAND=m ++CONFIG_MTD_UBI=m ++CONFIG_OF_CONFIGFS=y ++CONFIG_ZRAM=m ++CONFIG_BLK_DEV_LOOP=y ++CONFIG_BLK_DEV_CRYPTOLOOP=m ++CONFIG_BLK_DEV_DRBD=m ++CONFIG_BLK_DEV_NBD=m ++CONFIG_BLK_DEV_RAM=y ++CONFIG_CDROM_PKTCDVD=m ++CONFIG_ATA_OVER_ETH=m ++CONFIG_EEPROM_AT24=m ++CONFIG_TI_ST=m ++CONFIG_SCSI=y ++# CONFIG_SCSI_PROC_FS is not set ++CONFIG_BLK_DEV_SD=y ++CONFIG_CHR_DEV_ST=m ++CONFIG_CHR_DEV_OSST=m ++CONFIG_BLK_DEV_SR=m ++CONFIG_CHR_DEV_SG=m ++CONFIG_SCSI_ISCSI_ATTRS=y ++CONFIG_ISCSI_TCP=m ++CONFIG_ISCSI_BOOT_SYSFS=m ++CONFIG_MD=y ++CONFIG_MD_LINEAR=m ++CONFIG_MD_RAID0=m ++CONFIG_BLK_DEV_DM=m ++CONFIG_DM_CRYPT=m ++CONFIG_DM_SNAPSHOT=m ++CONFIG_DM_THIN_PROVISIONING=m ++CONFIG_DM_MIRROR=m ++CONFIG_DM_LOG_USERSPACE=m ++CONFIG_DM_RAID=m ++CONFIG_DM_ZERO=m ++CONFIG_DM_DELAY=m ++CONFIG_NETDEVICES=y ++CONFIG_BONDING=m ++CONFIG_DUMMY=m ++CONFIG_IFB=m ++CONFIG_MACVLAN=m ++CONFIG_VXLAN=m ++CONFIG_NETCONSOLE=m ++CONFIG_TUN=m ++CONFIG_VETH=m ++CONFIG_ENC28J60=m ++CONFIG_QCA7000=m ++CONFIG_MDIO_BITBANG=m ++CONFIG_PPP=m ++CONFIG_PPP_BSDCOMP=m ++CONFIG_PPP_DEFLATE=m ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_MPPE=m ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPPOATM=m ++CONFIG_PPPOE=m ++CONFIG_PPPOL2TP=m ++CONFIG_PPP_ASYNC=m ++CONFIG_PPP_SYNC_TTY=m ++CONFIG_SLIP=m ++CONFIG_SLIP_COMPRESSED=y ++CONFIG_SLIP_SMART=y ++CONFIG_USB_CATC=m ++CONFIG_USB_KAWETH=m ++CONFIG_USB_PEGASUS=m ++CONFIG_USB_RTL8150=m ++CONFIG_USB_RTL8152=m ++CONFIG_USB_USBNET=y ++CONFIG_USB_NET_AX8817X=m ++CONFIG_USB_NET_AX88179_178A=m ++CONFIG_USB_NET_CDCETHER=m ++CONFIG_USB_NET_CDC_EEM=m ++CONFIG_USB_NET_CDC_NCM=m ++CONFIG_USB_NET_HUAWEI_CDC_NCM=m ++CONFIG_USB_NET_CDC_MBIM=m ++CONFIG_USB_NET_DM9601=m ++CONFIG_USB_NET_SR9700=m ++CONFIG_USB_NET_SR9800=m ++CONFIG_USB_NET_SMSC75XX=m ++CONFIG_USB_NET_SMSC95XX=y ++CONFIG_USB_NET_GL620A=m ++CONFIG_USB_NET_NET1080=m ++CONFIG_USB_NET_PLUSB=m ++CONFIG_USB_NET_MCS7830=m ++CONFIG_USB_NET_CDC_SUBSET=m ++CONFIG_USB_ALI_M5632=y ++CONFIG_USB_AN2720=y ++CONFIG_USB_EPSON2888=y ++CONFIG_USB_KC2190=y ++CONFIG_USB_NET_ZAURUS=m ++CONFIG_USB_NET_CX82310_ETH=m ++CONFIG_USB_NET_KALMIA=m ++CONFIG_USB_NET_QMI_WWAN=m ++CONFIG_USB_HSO=m ++CONFIG_USB_NET_INT51X1=m ++CONFIG_USB_IPHETH=m ++CONFIG_USB_SIERRA_NET=m ++CONFIG_USB_VL600=m ++CONFIG_ATH9K=m ++CONFIG_ATH9K_HTC=m ++CONFIG_CARL9170=m ++CONFIG_ATH6KL=m ++CONFIG_ATH6KL_USB=m ++CONFIG_AR5523=m ++CONFIG_AT76C50X_USB=m ++CONFIG_B43=m ++# CONFIG_B43_PHY_N is not set ++CONFIG_B43LEGACY=m ++CONFIG_BRCMFMAC=m ++CONFIG_BRCMFMAC_USB=y ++CONFIG_HOSTAP=m ++CONFIG_P54_COMMON=m ++CONFIG_P54_USB=m ++CONFIG_LIBERTAS=m ++CONFIG_LIBERTAS_USB=m ++CONFIG_LIBERTAS_SDIO=m ++CONFIG_LIBERTAS_THINFIRM=m ++CONFIG_LIBERTAS_THINFIRM_USB=m ++CONFIG_MWIFIEX=m ++CONFIG_MWIFIEX_SDIO=m ++CONFIG_MT7601U=m ++CONFIG_RT2X00=m ++CONFIG_RT2500USB=m ++CONFIG_RT73USB=m ++CONFIG_RT2800USB=m ++CONFIG_RT2800USB_RT3573=y ++CONFIG_RT2800USB_RT53XX=y ++CONFIG_RT2800USB_RT55XX=y ++CONFIG_RT2800USB_UNKNOWN=y ++CONFIG_RTL8187=m ++CONFIG_RTL8192CU=m ++CONFIG_USB_ZD1201=m ++CONFIG_ZD1211RW=m ++CONFIG_MAC80211_HWSIM=m ++CONFIG_USB_NET_RNDIS_WLAN=m ++CONFIG_WIMAX_I2400M_USB=m ++CONFIG_IEEE802154_AT86RF230=m ++CONFIG_IEEE802154_MRF24J40=m ++CONFIG_IEEE802154_CC2520=m ++CONFIG_INPUT_POLLDEV=m ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_JOYDEV=m ++CONFIG_INPUT_EVDEV=m ++# CONFIG_KEYBOARD_ATKBD is not set ++CONFIG_KEYBOARD_GPIO=m ++# CONFIG_INPUT_MOUSE is not set ++CONFIG_INPUT_JOYSTICK=y ++CONFIG_JOYSTICK_IFORCE=m ++CONFIG_JOYSTICK_IFORCE_USB=y ++CONFIG_JOYSTICK_XPAD=m ++CONFIG_JOYSTICK_XPAD_FF=y ++CONFIG_JOYSTICK_XPAD_LEDS=y ++CONFIG_JOYSTICK_RPISENSE=m ++CONFIG_INPUT_TOUCHSCREEN=y ++CONFIG_TOUCHSCREEN_ADS7846=m ++CONFIG_TOUCHSCREEN_EGALAX=m ++CONFIG_TOUCHSCREEN_RPI_FT5406=m ++CONFIG_TOUCHSCREEN_USB_COMPOSITE=m ++CONFIG_TOUCHSCREEN_STMPE=m ++CONFIG_INPUT_MISC=y ++CONFIG_INPUT_AD714X=m ++CONFIG_INPUT_ATI_REMOTE2=m ++CONFIG_INPUT_KEYSPAN_REMOTE=m ++CONFIG_INPUT_POWERMATE=m ++CONFIG_INPUT_YEALINK=m ++CONFIG_INPUT_CM109=m ++CONFIG_INPUT_UINPUT=m ++CONFIG_INPUT_GPIO_ROTARY_ENCODER=m ++CONFIG_INPUT_ADXL34X=m ++CONFIG_INPUT_CMA3000=m ++CONFIG_SERIO=m ++CONFIG_SERIO_RAW=m ++CONFIG_GAMEPORT=m ++CONFIG_GAMEPORT_NS558=m ++CONFIG_GAMEPORT_L4=m ++CONFIG_BRCM_CHAR_DRIVERS=y ++CONFIG_BCM_VC_CMA=y ++CONFIG_BCM_VCIO=y ++CONFIG_BCM_VC_SM=y ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_DEVKMEM is not set ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set ++CONFIG_SERIAL_8250_CONSOLE=y ++# CONFIG_SERIAL_8250_DMA is not set ++CONFIG_SERIAL_8250_NR_UARTS=1 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=0 ++CONFIG_SERIAL_8250_EXTENDED=y ++CONFIG_SERIAL_8250_SHARE_IRQ=y ++CONFIG_SERIAL_8250_BCM2835AUX=y ++CONFIG_SERIAL_OF_PLATFORM=y ++CONFIG_SERIAL_AMBA_PL011=y ++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y ++CONFIG_SERIAL_SC16IS7XX=m ++CONFIG_SERIAL_SC16IS7XX_SPI=y ++CONFIG_TTY_PRINTK=y ++CONFIG_HW_RANDOM=y ++CONFIG_RAW_DRIVER=y ++CONFIG_I2C=y ++CONFIG_I2C_CHARDEV=m ++CONFIG_I2C_MUX_PCA954x=m ++CONFIG_I2C_BCM2708=m ++CONFIG_I2C_BCM2835=m ++CONFIG_I2C_GPIO=m ++CONFIG_SPI=y ++CONFIG_SPI_BCM2835=m ++CONFIG_SPI_BCM2835AUX=m ++CONFIG_SPI_SPIDEV=y ++CONFIG_PPS=m ++CONFIG_PPS_CLIENT_LDISC=m ++CONFIG_PPS_CLIENT_GPIO=m ++CONFIG_GPIO_SYSFS=y ++CONFIG_GPIO_ARIZONA=m ++CONFIG_GPIO_STMPE=y ++CONFIG_GPIO_MCP23S08=m ++CONFIG_W1=m ++CONFIG_W1_MASTER_DS2490=m ++CONFIG_W1_MASTER_DS2482=m ++CONFIG_W1_MASTER_DS1WM=m ++CONFIG_W1_MASTER_GPIO=m ++CONFIG_W1_SLAVE_THERM=m ++CONFIG_W1_SLAVE_SMEM=m ++CONFIG_W1_SLAVE_DS2408=m ++CONFIG_W1_SLAVE_DS2413=m ++CONFIG_W1_SLAVE_DS2406=m ++CONFIG_W1_SLAVE_DS2423=m ++CONFIG_W1_SLAVE_DS2431=m ++CONFIG_W1_SLAVE_DS2433=m ++CONFIG_W1_SLAVE_DS2760=m ++CONFIG_W1_SLAVE_DS2780=m ++CONFIG_W1_SLAVE_DS2781=m ++CONFIG_W1_SLAVE_DS28E04=m ++CONFIG_W1_SLAVE_BQ27000=m ++CONFIG_POWER_RESET=y ++CONFIG_POWER_RESET_GPIO=y ++CONFIG_BATTERY_DS2760=m ++CONFIG_HWMON=m ++CONFIG_SENSORS_LM75=m ++CONFIG_SENSORS_SHT21=m ++CONFIG_SENSORS_SHTC1=m ++CONFIG_SENSORS_INA2XX=m ++CONFIG_THERMAL=y ++CONFIG_THERMAL_BCM2835=y ++CONFIG_WATCHDOG=y ++CONFIG_BCM2835_WDT=y ++CONFIG_UCB1400_CORE=m ++CONFIG_MFD_STMPE=y ++CONFIG_STMPE_SPI=y ++CONFIG_MFD_ARIZONA_I2C=m ++CONFIG_MFD_ARIZONA_SPI=m ++CONFIG_MFD_WM5102=y ++CONFIG_MEDIA_SUPPORT=m ++CONFIG_MEDIA_CAMERA_SUPPORT=y ++CONFIG_MEDIA_ANALOG_TV_SUPPORT=y ++CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y ++CONFIG_MEDIA_RADIO_SUPPORT=y ++CONFIG_MEDIA_RC_SUPPORT=y ++CONFIG_MEDIA_CONTROLLER=y ++CONFIG_LIRC=m ++CONFIG_RC_DEVICES=y ++CONFIG_RC_ATI_REMOTE=m ++CONFIG_IR_IMON=m ++CONFIG_IR_MCEUSB=m ++CONFIG_IR_REDRAT3=m ++CONFIG_IR_STREAMZAP=m ++CONFIG_IR_IGUANA=m ++CONFIG_IR_TTUSBIR=m ++CONFIG_RC_LOOPBACK=m ++CONFIG_IR_GPIO_CIR=m ++CONFIG_MEDIA_USB_SUPPORT=y ++CONFIG_USB_VIDEO_CLASS=m ++CONFIG_USB_M5602=m ++CONFIG_USB_STV06XX=m ++CONFIG_USB_GL860=m ++CONFIG_USB_GSPCA_BENQ=m ++CONFIG_USB_GSPCA_CONEX=m ++CONFIG_USB_GSPCA_CPIA1=m ++CONFIG_USB_GSPCA_DTCS033=m ++CONFIG_USB_GSPCA_ETOMS=m ++CONFIG_USB_GSPCA_FINEPIX=m ++CONFIG_USB_GSPCA_JEILINJ=m ++CONFIG_USB_GSPCA_JL2005BCD=m ++CONFIG_USB_GSPCA_KINECT=m ++CONFIG_USB_GSPCA_KONICA=m ++CONFIG_USB_GSPCA_MARS=m ++CONFIG_USB_GSPCA_MR97310A=m ++CONFIG_USB_GSPCA_NW80X=m ++CONFIG_USB_GSPCA_OV519=m ++CONFIG_USB_GSPCA_OV534=m ++CONFIG_USB_GSPCA_OV534_9=m ++CONFIG_USB_GSPCA_PAC207=m ++CONFIG_USB_GSPCA_PAC7302=m ++CONFIG_USB_GSPCA_PAC7311=m ++CONFIG_USB_GSPCA_SE401=m ++CONFIG_USB_GSPCA_SN9C2028=m ++CONFIG_USB_GSPCA_SN9C20X=m ++CONFIG_USB_GSPCA_SONIXB=m ++CONFIG_USB_GSPCA_SONIXJ=m ++CONFIG_USB_GSPCA_SPCA500=m ++CONFIG_USB_GSPCA_SPCA501=m ++CONFIG_USB_GSPCA_SPCA505=m ++CONFIG_USB_GSPCA_SPCA506=m ++CONFIG_USB_GSPCA_SPCA508=m ++CONFIG_USB_GSPCA_SPCA561=m ++CONFIG_USB_GSPCA_SPCA1528=m ++CONFIG_USB_GSPCA_SQ905=m ++CONFIG_USB_GSPCA_SQ905C=m ++CONFIG_USB_GSPCA_SQ930X=m ++CONFIG_USB_GSPCA_STK014=m ++CONFIG_USB_GSPCA_STK1135=m ++CONFIG_USB_GSPCA_STV0680=m ++CONFIG_USB_GSPCA_SUNPLUS=m ++CONFIG_USB_GSPCA_T613=m ++CONFIG_USB_GSPCA_TOPRO=m ++CONFIG_USB_GSPCA_TV8532=m ++CONFIG_USB_GSPCA_VC032X=m ++CONFIG_USB_GSPCA_VICAM=m ++CONFIG_USB_GSPCA_XIRLINK_CIT=m ++CONFIG_USB_GSPCA_ZC3XX=m ++CONFIG_USB_PWC=m ++CONFIG_VIDEO_CPIA2=m ++CONFIG_USB_ZR364XX=m ++CONFIG_USB_STKWEBCAM=m ++CONFIG_USB_S2255=m ++CONFIG_VIDEO_USBTV=m ++CONFIG_VIDEO_PVRUSB2=m ++CONFIG_VIDEO_HDPVR=m ++CONFIG_VIDEO_USBVISION=m ++CONFIG_VIDEO_STK1160_COMMON=m ++CONFIG_VIDEO_STK1160_AC97=y ++CONFIG_VIDEO_GO7007=m ++CONFIG_VIDEO_GO7007_USB=m ++CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m ++CONFIG_VIDEO_AU0828=m ++CONFIG_VIDEO_AU0828_RC=y ++CONFIG_VIDEO_CX231XX=m ++CONFIG_VIDEO_CX231XX_ALSA=m ++CONFIG_VIDEO_CX231XX_DVB=m ++CONFIG_VIDEO_TM6000=m ++CONFIG_VIDEO_TM6000_ALSA=m ++CONFIG_VIDEO_TM6000_DVB=m ++CONFIG_DVB_USB=m ++CONFIG_DVB_USB_A800=m ++CONFIG_DVB_USB_DIBUSB_MB=m ++CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y ++CONFIG_DVB_USB_DIBUSB_MC=m ++CONFIG_DVB_USB_DIB0700=m ++CONFIG_DVB_USB_UMT_010=m ++CONFIG_DVB_USB_CXUSB=m ++CONFIG_DVB_USB_M920X=m ++CONFIG_DVB_USB_DIGITV=m ++CONFIG_DVB_USB_VP7045=m ++CONFIG_DVB_USB_VP702X=m ++CONFIG_DVB_USB_GP8PSK=m ++CONFIG_DVB_USB_NOVA_T_USB2=m ++CONFIG_DVB_USB_TTUSB2=m ++CONFIG_DVB_USB_DTT200U=m ++CONFIG_DVB_USB_OPERA1=m ++CONFIG_DVB_USB_AF9005=m ++CONFIG_DVB_USB_AF9005_REMOTE=m ++CONFIG_DVB_USB_PCTV452E=m ++CONFIG_DVB_USB_DW2102=m ++CONFIG_DVB_USB_CINERGY_T2=m ++CONFIG_DVB_USB_DTV5100=m ++CONFIG_DVB_USB_FRIIO=m ++CONFIG_DVB_USB_AZ6027=m ++CONFIG_DVB_USB_TECHNISAT_USB2=m ++CONFIG_DVB_USB_V2=m ++CONFIG_DVB_USB_AF9015=m ++CONFIG_DVB_USB_AF9035=m ++CONFIG_DVB_USB_ANYSEE=m ++CONFIG_DVB_USB_AU6610=m ++CONFIG_DVB_USB_AZ6007=m ++CONFIG_DVB_USB_CE6230=m ++CONFIG_DVB_USB_EC168=m ++CONFIG_DVB_USB_GL861=m ++CONFIG_DVB_USB_LME2510=m ++CONFIG_DVB_USB_MXL111SF=m ++CONFIG_DVB_USB_RTL28XXU=m ++CONFIG_DVB_USB_DVBSKY=m ++CONFIG_SMS_USB_DRV=m ++CONFIG_DVB_B2C2_FLEXCOP_USB=m ++CONFIG_DVB_AS102=m ++CONFIG_VIDEO_EM28XX=m ++CONFIG_VIDEO_EM28XX_V4L2=m ++CONFIG_VIDEO_EM28XX_ALSA=m ++CONFIG_VIDEO_EM28XX_DVB=m ++CONFIG_V4L_PLATFORM_DRIVERS=y ++CONFIG_VIDEO_BCM2835=y ++CONFIG_VIDEO_BCM2835_MMAL=m ++CONFIG_RADIO_SI470X=y ++CONFIG_USB_SI470X=m ++CONFIG_I2C_SI470X=m ++CONFIG_RADIO_SI4713=m ++CONFIG_I2C_SI4713=m ++CONFIG_USB_MR800=m ++CONFIG_USB_DSBR=m ++CONFIG_RADIO_SHARK=m ++CONFIG_RADIO_SHARK2=m ++CONFIG_USB_KEENE=m ++CONFIG_USB_MA901=m ++CONFIG_RADIO_TEA5764=m ++CONFIG_RADIO_SAA7706H=m ++CONFIG_RADIO_TEF6862=m ++CONFIG_RADIO_WL1273=m ++CONFIG_RADIO_WL128X=m ++# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set ++CONFIG_VIDEO_UDA1342=m ++CONFIG_VIDEO_SONY_BTF_MPX=m ++CONFIG_VIDEO_TVP5150=m ++CONFIG_VIDEO_TW2804=m ++CONFIG_VIDEO_TW9903=m ++CONFIG_VIDEO_TW9906=m ++CONFIG_VIDEO_OV7640=m ++CONFIG_VIDEO_MT9V011=m ++CONFIG_DRM=m ++CONFIG_DRM_LOAD_EDID_FIRMWARE=y ++CONFIG_DRM_UDL=m ++CONFIG_DRM_VC4=m ++CONFIG_FB=y ++CONFIG_FB_BCM2708=y ++CONFIG_FB_UDL=m ++CONFIG_FB_SSD1307=m ++CONFIG_FB_RPISENSE=m ++# CONFIG_BACKLIGHT_GENERIC is not set ++CONFIG_BACKLIGHT_RPI=m ++CONFIG_BACKLIGHT_GPIO=m ++CONFIG_FRAMEBUFFER_CONSOLE=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++CONFIG_SOUND=y ++CONFIG_SND=m ++CONFIG_SND_SEQUENCER=m ++CONFIG_SND_SEQ_DUMMY=m ++CONFIG_SND_MIXER_OSS=m ++CONFIG_SND_PCM_OSS=m ++CONFIG_SND_SEQUENCER_OSS=y ++CONFIG_SND_HRTIMER=m ++CONFIG_SND_DUMMY=m ++CONFIG_SND_ALOOP=m ++CONFIG_SND_VIRMIDI=m ++CONFIG_SND_MTPAV=m ++CONFIG_SND_SERIAL_U16550=m ++CONFIG_SND_MPU401=m ++CONFIG_SND_BCM2835=m ++CONFIG_SND_USB_AUDIO=m ++CONFIG_SND_USB_UA101=m ++CONFIG_SND_USB_CAIAQ=m ++CONFIG_SND_USB_CAIAQ_INPUT=y ++CONFIG_SND_USB_6FIRE=m ++CONFIG_SND_SOC=m ++CONFIG_SND_BCM2835_SOC_I2S=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m ++CONFIG_SND_BCM2708_SOC_RPI_DAC=m ++CONFIG_SND_BCM2708_SOC_RPI_PROTO=m ++CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m ++CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI=m ++CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m ++CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI=m ++CONFIG_SND_BCM2708_SOC_RASPIDAC3=m ++CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m ++CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m ++CONFIG_SND_DIGIDAC1_SOUNDCARD=m ++CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m ++CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m ++CONFIG_SND_PISOUND=m ++CONFIG_SND_SOC_ADAU1701=m ++CONFIG_SND_SOC_AK4554=m ++CONFIG_SND_SOC_WM8804_I2C=m ++CONFIG_SND_SIMPLE_CARD=m ++CONFIG_SOUND_PRIME=m ++CONFIG_HIDRAW=y ++CONFIG_UHID=m ++CONFIG_HID_A4TECH=m ++CONFIG_HID_ACRUX=m ++CONFIG_HID_APPLE=m ++CONFIG_HID_BELKIN=m ++CONFIG_HID_BETOP_FF=m ++CONFIG_HID_CHERRY=m ++CONFIG_HID_CHICONY=m ++CONFIG_HID_CYPRESS=m ++CONFIG_HID_DRAGONRISE=m ++CONFIG_HID_EMS_FF=m ++CONFIG_HID_ELECOM=m ++CONFIG_HID_ELO=m ++CONFIG_HID_EZKEY=m ++CONFIG_HID_GEMBIRD=m ++CONFIG_HID_HOLTEK=m ++CONFIG_HID_KEYTOUCH=m ++CONFIG_HID_KYE=m ++CONFIG_HID_UCLOGIC=m ++CONFIG_HID_WALTOP=m ++CONFIG_HID_GYRATION=m ++CONFIG_HID_TWINHAN=m ++CONFIG_HID_KENSINGTON=m ++CONFIG_HID_LCPOWER=m ++CONFIG_HID_LOGITECH=m ++CONFIG_HID_LOGITECH_DJ=m ++CONFIG_LOGITECH_FF=y ++CONFIG_LOGIRUMBLEPAD2_FF=y ++CONFIG_LOGIG940_FF=y ++CONFIG_HID_MAGICMOUSE=m ++CONFIG_HID_MICROSOFT=m ++CONFIG_HID_MONTEREY=m ++CONFIG_HID_MULTITOUCH=m ++CONFIG_HID_NTRIG=m ++CONFIG_HID_ORTEK=m ++CONFIG_HID_PANTHERLORD=m ++CONFIG_HID_PETALYNX=m ++CONFIG_HID_PICOLCD=m ++CONFIG_HID_ROCCAT=m ++CONFIG_HID_SAMSUNG=m ++CONFIG_HID_SONY=m ++CONFIG_HID_SPEEDLINK=m ++CONFIG_HID_SUNPLUS=m ++CONFIG_HID_GREENASIA=m ++CONFIG_HID_SMARTJOYPLUS=m ++CONFIG_HID_TOPSEED=m ++CONFIG_HID_THINGM=m ++CONFIG_HID_THRUSTMASTER=m ++CONFIG_HID_WACOM=m ++CONFIG_HID_WIIMOTE=m ++CONFIG_HID_XINMO=m ++CONFIG_HID_ZEROPLUS=m ++CONFIG_HID_ZYDACRON=m ++CONFIG_HID_PID=y ++CONFIG_USB_HIDDEV=y ++CONFIG_USB=y ++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y ++CONFIG_USB_MON=m ++CONFIG_USB_DWCOTG=y ++CONFIG_USB_PRINTER=m ++CONFIG_USB_STORAGE=y ++CONFIG_USB_STORAGE_REALTEK=m ++CONFIG_USB_STORAGE_DATAFAB=m ++CONFIG_USB_STORAGE_FREECOM=m ++CONFIG_USB_STORAGE_ISD200=m ++CONFIG_USB_STORAGE_USBAT=m ++CONFIG_USB_STORAGE_SDDR09=m ++CONFIG_USB_STORAGE_SDDR55=m ++CONFIG_USB_STORAGE_JUMPSHOT=m ++CONFIG_USB_STORAGE_ALAUDA=m ++CONFIG_USB_STORAGE_ONETOUCH=m ++CONFIG_USB_STORAGE_KARMA=m ++CONFIG_USB_STORAGE_CYPRESS_ATACB=m ++CONFIG_USB_STORAGE_ENE_UB6250=m ++CONFIG_USB_MDC800=m ++CONFIG_USB_MICROTEK=m ++CONFIG_USBIP_CORE=m ++CONFIG_USBIP_VHCI_HCD=m ++CONFIG_USBIP_HOST=m ++CONFIG_USB_DWC2=m ++CONFIG_USB_SERIAL=m ++CONFIG_USB_SERIAL_GENERIC=y ++CONFIG_USB_SERIAL_AIRCABLE=m ++CONFIG_USB_SERIAL_ARK3116=m ++CONFIG_USB_SERIAL_BELKIN=m ++CONFIG_USB_SERIAL_CH341=m ++CONFIG_USB_SERIAL_WHITEHEAT=m ++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m ++CONFIG_USB_SERIAL_CP210X=m ++CONFIG_USB_SERIAL_CYPRESS_M8=m ++CONFIG_USB_SERIAL_EMPEG=m ++CONFIG_USB_SERIAL_FTDI_SIO=m ++CONFIG_USB_SERIAL_VISOR=m ++CONFIG_USB_SERIAL_IPAQ=m ++CONFIG_USB_SERIAL_IR=m ++CONFIG_USB_SERIAL_EDGEPORT=m ++CONFIG_USB_SERIAL_EDGEPORT_TI=m ++CONFIG_USB_SERIAL_F81232=m ++CONFIG_USB_SERIAL_GARMIN=m ++CONFIG_USB_SERIAL_IPW=m ++CONFIG_USB_SERIAL_IUU=m ++CONFIG_USB_SERIAL_KEYSPAN_PDA=m ++CONFIG_USB_SERIAL_KEYSPAN=m ++CONFIG_USB_SERIAL_KLSI=m ++CONFIG_USB_SERIAL_KOBIL_SCT=m ++CONFIG_USB_SERIAL_MCT_U232=m ++CONFIG_USB_SERIAL_METRO=m ++CONFIG_USB_SERIAL_MOS7720=m ++CONFIG_USB_SERIAL_MOS7840=m ++CONFIG_USB_SERIAL_NAVMAN=m ++CONFIG_USB_SERIAL_PL2303=m ++CONFIG_USB_SERIAL_OTI6858=m ++CONFIG_USB_SERIAL_QCAUX=m ++CONFIG_USB_SERIAL_QUALCOMM=m ++CONFIG_USB_SERIAL_SPCP8X5=m ++CONFIG_USB_SERIAL_SAFE=m ++CONFIG_USB_SERIAL_SIERRAWIRELESS=m ++CONFIG_USB_SERIAL_SYMBOL=m ++CONFIG_USB_SERIAL_TI=m ++CONFIG_USB_SERIAL_CYBERJACK=m ++CONFIG_USB_SERIAL_XIRCOM=m ++CONFIG_USB_SERIAL_OPTION=m ++CONFIG_USB_SERIAL_OMNINET=m ++CONFIG_USB_SERIAL_OPTICON=m ++CONFIG_USB_SERIAL_XSENS_MT=m ++CONFIG_USB_SERIAL_WISHBONE=m ++CONFIG_USB_SERIAL_SSU100=m ++CONFIG_USB_SERIAL_QT2=m ++CONFIG_USB_SERIAL_DEBUG=m ++CONFIG_USB_EMI62=m ++CONFIG_USB_EMI26=m ++CONFIG_USB_ADUTUX=m ++CONFIG_USB_SEVSEG=m ++CONFIG_USB_RIO500=m ++CONFIG_USB_LEGOTOWER=m ++CONFIG_USB_LCD=m ++CONFIG_USB_CYPRESS_CY7C63=m ++CONFIG_USB_CYTHERM=m ++CONFIG_USB_IDMOUSE=m ++CONFIG_USB_FTDI_ELAN=m ++CONFIG_USB_APPLEDISPLAY=m ++CONFIG_USB_LD=m ++CONFIG_USB_TRANCEVIBRATOR=m ++CONFIG_USB_IOWARRIOR=m ++CONFIG_USB_TEST=m ++CONFIG_USB_ISIGHTFW=m ++CONFIG_USB_YUREX=m ++CONFIG_USB_ATM=m ++CONFIG_USB_SPEEDTOUCH=m ++CONFIG_USB_CXACRU=m ++CONFIG_USB_UEAGLEATM=m ++CONFIG_USB_XUSBATM=m ++CONFIG_USB_GADGET=m ++CONFIG_USB_ZERO=m ++CONFIG_USB_AUDIO=m ++CONFIG_USB_ETH=m ++CONFIG_USB_GADGETFS=m ++CONFIG_USB_MASS_STORAGE=m ++CONFIG_USB_G_SERIAL=m ++CONFIG_USB_MIDI_GADGET=m ++CONFIG_USB_G_PRINTER=m ++CONFIG_USB_CDC_COMPOSITE=m ++CONFIG_USB_G_ACM_MS=m ++CONFIG_USB_G_MULTI=m ++CONFIG_USB_G_HID=m ++CONFIG_USB_G_WEBCAM=m ++CONFIG_MMC=y ++CONFIG_MMC_BLOCK_MINORS=32 ++CONFIG_MMC_BCM2835=y ++CONFIG_MMC_BCM2835_DMA=y ++CONFIG_MMC_BCM2835_SDHOST=y ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_PLTFM=y ++CONFIG_MMC_SPI=m ++CONFIG_LEDS_CLASS=y ++CONFIG_LEDS_GPIO=y ++CONFIG_LEDS_TRIGGER_TIMER=y ++CONFIG_LEDS_TRIGGER_ONESHOT=y ++CONFIG_LEDS_TRIGGER_HEARTBEAT=y ++CONFIG_LEDS_TRIGGER_BACKLIGHT=y ++CONFIG_LEDS_TRIGGER_CPU=y ++CONFIG_LEDS_TRIGGER_GPIO=y ++CONFIG_LEDS_TRIGGER_DEFAULT_ON=y ++CONFIG_LEDS_TRIGGER_TRANSIENT=m ++CONFIG_LEDS_TRIGGER_CAMERA=m ++CONFIG_LEDS_TRIGGER_INPUT=y ++CONFIG_LEDS_TRIGGER_PANIC=y ++CONFIG_RTC_CLASS=y ++# CONFIG_RTC_HCTOSYS is not set ++CONFIG_RTC_DRV_ABX80X=m ++CONFIG_RTC_DRV_DS1307=m ++CONFIG_RTC_DRV_DS1374=m ++CONFIG_RTC_DRV_DS1672=m ++CONFIG_RTC_DRV_MAX6900=m ++CONFIG_RTC_DRV_RS5C372=m ++CONFIG_RTC_DRV_ISL1208=m ++CONFIG_RTC_DRV_ISL12022=m ++CONFIG_RTC_DRV_X1205=m ++CONFIG_RTC_DRV_PCF8523=m ++CONFIG_RTC_DRV_PCF8563=m ++CONFIG_RTC_DRV_PCF8583=m ++CONFIG_RTC_DRV_M41T80=m ++CONFIG_RTC_DRV_BQ32K=m ++CONFIG_RTC_DRV_S35390A=m ++CONFIG_RTC_DRV_FM3130=m ++CONFIG_RTC_DRV_RX8581=m ++CONFIG_RTC_DRV_RX8025=m ++CONFIG_RTC_DRV_EM3027=m ++CONFIG_RTC_DRV_M41T93=m ++CONFIG_RTC_DRV_M41T94=m ++CONFIG_RTC_DRV_DS1302=m ++CONFIG_RTC_DRV_DS1305=m ++CONFIG_RTC_DRV_DS1390=m ++CONFIG_RTC_DRV_R9701=m ++CONFIG_RTC_DRV_RX4581=m ++CONFIG_RTC_DRV_RS5C348=m ++CONFIG_RTC_DRV_MAX6902=m ++CONFIG_RTC_DRV_PCF2123=m ++CONFIG_RTC_DRV_DS3232=m ++CONFIG_RTC_DRV_PCF2127=m ++CONFIG_RTC_DRV_RV3029C2=m ++CONFIG_DMADEVICES=y ++CONFIG_DMA_BCM2835=y ++CONFIG_DMA_BCM2708=y ++CONFIG_UIO=m ++CONFIG_UIO_PDRV_GENIRQ=m ++CONFIG_STAGING=y ++CONFIG_PRISM2_USB=m ++CONFIG_R8712U=m ++CONFIG_R8188EU=m ++CONFIG_VT6656=m ++CONFIG_SPEAKUP=m ++CONFIG_SPEAKUP_SYNTH_SOFT=m ++CONFIG_STAGING_MEDIA=y ++CONFIG_LIRC_STAGING=y ++CONFIG_LIRC_IMON=m ++CONFIG_LIRC_RPI=m ++CONFIG_LIRC_SASEM=m ++CONFIG_LIRC_SERIAL=m ++CONFIG_FB_TFT=m ++CONFIG_FB_TFT_AGM1264K_FL=m ++CONFIG_FB_TFT_BD663474=m ++CONFIG_FB_TFT_HX8340BN=m ++CONFIG_FB_TFT_HX8347D=m ++CONFIG_FB_TFT_HX8353D=m ++CONFIG_FB_TFT_HX8357D=m ++CONFIG_FB_TFT_ILI9163=m ++CONFIG_FB_TFT_ILI9320=m ++CONFIG_FB_TFT_ILI9325=m ++CONFIG_FB_TFT_ILI9340=m ++CONFIG_FB_TFT_ILI9341=m ++CONFIG_FB_TFT_ILI9481=m ++CONFIG_FB_TFT_ILI9486=m ++CONFIG_FB_TFT_PCD8544=m ++CONFIG_FB_TFT_RA8875=m ++CONFIG_FB_TFT_S6D02A1=m ++CONFIG_FB_TFT_S6D1121=m ++CONFIG_FB_TFT_SSD1289=m ++CONFIG_FB_TFT_SSD1306=m ++CONFIG_FB_TFT_SSD1331=m ++CONFIG_FB_TFT_SSD1351=m ++CONFIG_FB_TFT_ST7735R=m ++CONFIG_FB_TFT_TINYLCD=m ++CONFIG_FB_TFT_TLS8204=m ++CONFIG_FB_TFT_UC1701=m ++CONFIG_FB_TFT_UPD161704=m ++CONFIG_FB_TFT_WATTEROTT=m ++CONFIG_FB_FLEX=m ++CONFIG_FB_TFT_FBTFT_DEVICE=m ++CONFIG_MAILBOX=y ++CONFIG_BCM2835_MBOX=y ++# CONFIG_IOMMU_SUPPORT is not set ++CONFIG_RASPBERRYPI_POWER=y ++CONFIG_EXTCON=m ++CONFIG_EXTCON_ARIZONA=m ++CONFIG_IIO=m ++CONFIG_IIO_BUFFER=y ++CONFIG_IIO_BUFFER_CB=m ++CONFIG_IIO_KFIFO_BUF=m ++CONFIG_MCP320X=m ++CONFIG_MCP3422=m ++CONFIG_DHT11=m ++CONFIG_HTU21=m ++CONFIG_PWM_BCM2835=m ++CONFIG_PWM_PCA9685=m ++CONFIG_RASPBERRYPI_FIRMWARE=y ++CONFIG_EXT4_FS=y ++CONFIG_EXT4_FS_POSIX_ACL=y ++CONFIG_EXT4_FS_SECURITY=y ++CONFIG_REISERFS_FS=m ++CONFIG_REISERFS_FS_XATTR=y ++CONFIG_REISERFS_FS_POSIX_ACL=y ++CONFIG_REISERFS_FS_SECURITY=y ++CONFIG_JFS_FS=m ++CONFIG_JFS_POSIX_ACL=y ++CONFIG_JFS_SECURITY=y ++CONFIG_JFS_STATISTICS=y ++CONFIG_XFS_FS=m ++CONFIG_XFS_QUOTA=y ++CONFIG_XFS_POSIX_ACL=y ++CONFIG_XFS_RT=y ++CONFIG_GFS2_FS=m ++CONFIG_OCFS2_FS=m ++CONFIG_BTRFS_FS=m ++CONFIG_BTRFS_FS_POSIX_ACL=y ++CONFIG_NILFS2_FS=m ++CONFIG_F2FS_FS=y ++CONFIG_FANOTIFY=y ++CONFIG_QFMT_V1=m ++CONFIG_QFMT_V2=m ++CONFIG_AUTOFS4_FS=y ++CONFIG_FUSE_FS=m ++CONFIG_CUSE=m ++CONFIG_OVERLAY_FS=m ++CONFIG_FSCACHE=y ++CONFIG_FSCACHE_STATS=y ++CONFIG_FSCACHE_HISTOGRAM=y ++CONFIG_CACHEFILES=y ++CONFIG_ISO9660_FS=m ++CONFIG_JOLIET=y ++CONFIG_ZISOFS=y ++CONFIG_UDF_FS=m ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_IOCHARSET="ascii" ++CONFIG_NTFS_FS=m ++CONFIG_NTFS_RW=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++CONFIG_ECRYPT_FS=m ++CONFIG_HFS_FS=m ++CONFIG_HFSPLUS_FS=m ++CONFIG_JFFS2_FS=m ++CONFIG_JFFS2_SUMMARY=y ++CONFIG_UBIFS_FS=m ++CONFIG_SQUASHFS=m ++CONFIG_SQUASHFS_XATTR=y ++CONFIG_SQUASHFS_LZO=y ++CONFIG_SQUASHFS_XZ=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3_ACL=y ++CONFIG_NFS_V4=y ++CONFIG_NFS_SWAP=y ++CONFIG_ROOT_NFS=y ++CONFIG_NFS_FSCACHE=y ++CONFIG_NFSD=m ++CONFIG_NFSD_V3_ACL=y ++CONFIG_NFSD_V4=y ++CONFIG_CIFS=m ++CONFIG_CIFS_WEAK_PW_HASH=y ++CONFIG_CIFS_UPCALL=y ++CONFIG_CIFS_XATTR=y ++CONFIG_CIFS_POSIX=y ++CONFIG_CIFS_ACL=y ++CONFIG_CIFS_DFS_UPCALL=y ++CONFIG_CIFS_SMB2=y ++CONFIG_CIFS_FSCACHE=y ++CONFIG_9P_FS=m ++CONFIG_9P_FS_POSIX_ACL=y ++CONFIG_NLS_DEFAULT="utf8" ++CONFIG_NLS_CODEPAGE_437=y ++CONFIG_NLS_CODEPAGE_737=m ++CONFIG_NLS_CODEPAGE_775=m ++CONFIG_NLS_CODEPAGE_850=m ++CONFIG_NLS_CODEPAGE_852=m ++CONFIG_NLS_CODEPAGE_855=m ++CONFIG_NLS_CODEPAGE_857=m ++CONFIG_NLS_CODEPAGE_860=m ++CONFIG_NLS_CODEPAGE_861=m ++CONFIG_NLS_CODEPAGE_862=m ++CONFIG_NLS_CODEPAGE_863=m ++CONFIG_NLS_CODEPAGE_864=m ++CONFIG_NLS_CODEPAGE_865=m ++CONFIG_NLS_CODEPAGE_866=m ++CONFIG_NLS_CODEPAGE_869=m ++CONFIG_NLS_CODEPAGE_936=m ++CONFIG_NLS_CODEPAGE_950=m ++CONFIG_NLS_CODEPAGE_932=m ++CONFIG_NLS_CODEPAGE_949=m ++CONFIG_NLS_CODEPAGE_874=m ++CONFIG_NLS_ISO8859_8=m ++CONFIG_NLS_CODEPAGE_1250=m ++CONFIG_NLS_CODEPAGE_1251=m ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=m ++CONFIG_NLS_ISO8859_2=m ++CONFIG_NLS_ISO8859_3=m ++CONFIG_NLS_ISO8859_4=m ++CONFIG_NLS_ISO8859_5=m ++CONFIG_NLS_ISO8859_6=m ++CONFIG_NLS_ISO8859_7=m ++CONFIG_NLS_ISO8859_9=m ++CONFIG_NLS_ISO8859_13=m ++CONFIG_NLS_ISO8859_14=m ++CONFIG_NLS_ISO8859_15=m ++CONFIG_NLS_KOI8_R=m ++CONFIG_NLS_KOI8_U=m ++CONFIG_DLM=m ++CONFIG_PRINTK_TIME=y ++CONFIG_BOOT_PRINTK_DELAY=y ++CONFIG_DEBUG_MEMORY_INIT=y ++CONFIG_DETECT_HUNG_TASK=y ++CONFIG_TIMER_STATS=y ++CONFIG_LATENCYTOP=y ++CONFIG_IRQSOFF_TRACER=y ++CONFIG_SCHED_TRACER=y ++CONFIG_STACK_TRACER=y ++CONFIG_BLK_DEV_IO_TRACE=y ++# CONFIG_KPROBE_EVENT is not set ++CONFIG_FUNCTION_PROFILER=y ++CONFIG_KGDB=y ++CONFIG_KGDB_KDB=y ++CONFIG_KDB_KEYBOARD=y ++CONFIG_CRYPTO_USER=m ++CONFIG_CRYPTO_CRYPTD=m ++CONFIG_CRYPTO_CBC=y ++CONFIG_CRYPTO_CTS=m ++CONFIG_CRYPTO_XTS=m ++CONFIG_CRYPTO_XCBC=m ++CONFIG_CRYPTO_SHA512=m ++CONFIG_CRYPTO_TGR192=m ++CONFIG_CRYPTO_WP512=m ++CONFIG_CRYPTO_CAST5=m ++CONFIG_CRYPTO_DES=y ++CONFIG_CRYPTO_USER_API_SKCIPHER=m ++# CONFIG_CRYPTO_HW is not set ++CONFIG_ARM_CRYPTO=y ++CONFIG_CRYPTO_SHA1_ARM=m ++CONFIG_CRYPTO_AES_ARM=m ++CONFIG_CRC_ITU_T=y ++CONFIG_LIBCRC32C=y diff --git a/target/linux/brcm2708/patches-4.9/950-0094-Add-arm64-configuration-and-device-tree-differences.patch b/target/linux/brcm2708/patches-4.9/950-0094-Add-arm64-configuration-and-device-tree-differences.patch new file mode 100644 index 000000000000..0cbb4d77f362 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0094-Add-arm64-configuration-and-device-tree-differences.patch @@ -0,0 +1,1407 @@ +From 64d1c392baa391243d0a7963379ab957d5d9b8b1 Mon Sep 17 00:00:00 2001 +From: Michael Zoran +Date: Wed, 24 Aug 2016 03:35:56 -0700 +Subject: [PATCH] Add arm64 configuration and device tree differences. Disable + MMC_BCM2835_SDHOST and MMC_BCM2835 since these drivers are crashing at the + moment. + +ARM64: Modify default config to get raspbian to boot (#1686) + +1. Enable emulation of deprecated instructions. +2. Enable ARM 8.1 and 8.2 features which are not detected at runtime. +3. Switch the default governer to powersave. +4. Include the watchdog timer driver in the kernel image rather then a module. + +Tested with raspbian-jessie 2016-09-23. +--- + arch/arm64/Kconfig.platforms | 22 + + arch/arm64/boot/dts/broadcom/Makefile | 1 + + arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts | 3 + + arch/arm64/configs/bcmrpi3_defconfig | 1334 ++++++++++++++++++++++ + 4 files changed, 1360 insertions(+) + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts + create mode 100644 arch/arm64/configs/bcmrpi3_defconfig + +--- a/arch/arm64/Kconfig.platforms ++++ b/arch/arm64/Kconfig.platforms +@@ -1,5 +1,27 @@ + menu "Platform selection" + ++config MACH_BCM2709 ++ bool ++ ++config ARCH_BCM2709 ++ bool "Broadcom BCM2709 family" ++ select MACH_BCM2709 ++ select HAVE_SMP ++ select ARM_AMBA ++ select COMMON_CLK ++ select ARCH_HAS_CPUFREQ ++ select GENERIC_CLOCKEVENTS ++ select MULTI_IRQ_HANDLER ++ select SPARSE_IRQ ++ select MFD_SYSCON ++ select VC4 ++ select USE_OF ++ select ARCH_REQUIRE_GPIOLIB ++ select PINCTRL ++ select PINCTRL_BCM2835 ++ help ++ This enables support for Broadcom BCM2709 boards. ++ + config ARCH_SUNXI + bool "Allwinner sunxi 64-bit SoC Family" + select GENERIC_IRQ_CHIP +--- a/arch/arm64/boot/dts/broadcom/Makefile ++++ b/arch/arm64/boot/dts/broadcom/Makefile +@@ -1,6 +1,7 @@ + dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb + dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb + dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb ++dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb + + always := $(dtb-y) + subdir-y := $(dts-dirs) +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts +@@ -0,0 +1,3 @@ ++#define RPI364 ++ ++#include "../../../../arm/boot/dts/bcm2710-rpi-3-b.dts" +--- /dev/null ++++ b/arch/arm64/configs/bcmrpi3_defconfig +@@ -0,0 +1,1334 @@ ++# CONFIG_ARM_PATCH_PHYS_VIRT is not set ++CONFIG_PHYS_OFFSET=0 ++CONFIG_LOCALVERSION="-v8" ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_64BIT=y ++CONFIG_SYSVIPC=y ++CONFIG_POSIX_MQUEUE=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++ ++# ++# ARM errata workarounds via the alternatives framework ++# ++CONFIG_ARM64_ERRATUM_826319=n ++CONFIG_ARM64_ERRATUM_827319=n ++CONFIG_ARM64_ERRATUM_824069=n ++CONFIG_ARM64_ERRATUM_819472=n ++CONFIG_ARM64_ERRATUM_832075=n ++CONFIG_ARM64_ERRATUM_845719=n ++CONFIG_ARM64_ERRATUM_843419=n ++CONFIG_CAVIUM_ERRATUM_22375=n ++CONFIG_CAVIUM_ERRATUM_23154=n ++CONFIG_CAVIUM_ERRATUM_27456=n ++CONFIG_ARM64_4K_PAGES=y ++CONFIG_ARM64_VA_BITS_39=y ++CONFIG_ARM64_VA_BITS=39 ++CONFIG_SCHED_MC=y ++CONFIG_NR_CPUS=4 ++CONFIG_HOTPLUG_CPU=y ++CONFIG_ARMV8_DEPRECATED=y ++CONFIG_SWP_EMULATION=y ++CONFIG_CP15_BARRIER_EMULATION=y ++CONFIG_SETEND_EMULATION=y ++ ++# ++# ARMv8.1 architectural features ++# ++CONFIG_ARM64_HW_AFDBM=y ++CONFIG_ARM64_PAN=y ++CONFIG_ARM64_LSE_ATOMICS=y ++CONFIG_ARM64_VHE=y ++ ++# ++# ARMv8.2 architectural features ++# ++CONFIG_ARM64_UAO=y ++CONFIG_ARM64_MODULE_CMODEL_LARGE=n ++CONFIG_RANDOMIZE_BASE=n ++ ++CONFIG_BSD_PROCESS_ACCT=y ++CONFIG_BSD_PROCESS_ACCT_V3=y ++CONFIG_TASKSTATS=y ++CONFIG_TASK_DELAY_ACCT=y ++CONFIG_TASK_XACCT=y ++CONFIG_TASK_IO_ACCOUNTING=y ++CONFIG_IKCONFIG=m ++CONFIG_IKCONFIG_PROC=y ++CONFIG_NMI_LOG_BUF_SHIFT=12 ++CONFIG_MEMCG=y ++CONFIG_BLK_CGROUP=y ++CONFIG_CGROUP_FREEZER=y ++CONFIG_CPUSETS=y ++CONFIG_CGROUP_DEVICE=y ++CONFIG_CGROUP_CPUACCT=y ++CONFIG_NAMESPACES=y ++CONFIG_USER_NS=y ++CONFIG_SCHED_AUTOGROUP=y ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_EMBEDDED=y ++# CONFIG_COMPAT_BRK is not set ++CONFIG_PROFILING=y ++CONFIG_OPROFILE=m ++CONFIG_KPROBES=y ++CONFIG_JUMP_LABEL=y ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODVERSIONS=y ++CONFIG_MODULE_SRCVERSION_ALL=y ++CONFIG_TRIM_UNUSED_KSYMS=y ++CONFIG_BLK_DEV_THROTTLING=y ++CONFIG_PARTITION_ADVANCED=y ++CONFIG_MAC_PARTITION=y ++CONFIG_CFQ_GROUP_IOSCHED=y ++CONFIG_ARCH_BCM2709=y ++# CONFIG_CACHE_L2X0 is not set ++CONFIG_SMP=y ++CONFIG_HAVE_ARM_ARCH_TIMER=y ++CONFIG_VMSPLIT_2G=y ++CONFIG_PREEMPT_VOLUNTARY=y ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++# CONFIG_CPU_SW_DOMAIN_PAN is not set ++CONFIG_CLEANCACHE=y ++CONFIG_FRONTSWAP=y ++CONFIG_CMA=y ++CONFIG_ZSMALLOC=m ++CONFIG_PGTABLE_MAPPING=y ++CONFIG_UACCESS_WITH_MEMCPY=y ++CONFIG_SECCOMP=y ++# CONFIG_ATAGS is not set ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" ++CONFIG_CPU_FREQ=y ++CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y ++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y ++CONFIG_CPU_FREQ_GOV_USERSPACE=y ++CONFIG_CPU_FREQ_GOV_ONDEMAND=y ++CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y ++CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y ++CONFIG_VFP=y ++CONFIG_NEON=y ++CONFIG_KERNEL_MODE_NEON=y ++CONFIG_BINFMT_MISC=m ++CONFIG_COMPAT=y ++CONFIG_SYSVIPC_COMPAT=y ++ ++# CONFIG_SUSPEND is not set ++CONFIG_PM=y ++CONFIG_NET=y ++CONFIG_PACKET=y ++CONFIG_UNIX=y ++CONFIG_XFRM_USER=y ++CONFIG_NET_KEY=m ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++CONFIG_IP_ADVANCED_ROUTER=y ++CONFIG_IP_MULTIPLE_TABLES=y ++CONFIG_IP_ROUTE_MULTIPATH=y ++CONFIG_IP_ROUTE_VERBOSE=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_RARP=y ++CONFIG_NET_IPIP=m ++CONFIG_NET_IPGRE_DEMUX=m ++CONFIG_NET_IPGRE=m ++CONFIG_IP_MROUTE=y ++CONFIG_IP_MROUTE_MULTIPLE_TABLES=y ++CONFIG_IP_PIMSM_V1=y ++CONFIG_IP_PIMSM_V2=y ++CONFIG_SYN_COOKIES=y ++CONFIG_INET_AH=m ++CONFIG_INET_ESP=m ++CONFIG_INET_IPCOMP=m ++CONFIG_INET_XFRM_MODE_TRANSPORT=m ++CONFIG_INET_XFRM_MODE_TUNNEL=m ++CONFIG_INET_XFRM_MODE_BEET=m ++CONFIG_INET_DIAG=m ++CONFIG_IPV6=m ++CONFIG_IPV6_ROUTER_PREF=y ++CONFIG_INET6_AH=m ++CONFIG_INET6_ESP=m ++CONFIG_INET6_IPCOMP=m ++CONFIG_IPV6_TUNNEL=m ++CONFIG_IPV6_MULTIPLE_TABLES=y ++CONFIG_IPV6_SUBTREES=y ++CONFIG_IPV6_MROUTE=y ++CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y ++CONFIG_IPV6_PIMSM_V2=y ++CONFIG_NETFILTER=y ++CONFIG_NF_CONNTRACK=m ++CONFIG_NF_CONNTRACK_ZONES=y ++CONFIG_NF_CONNTRACK_EVENTS=y ++CONFIG_NF_CONNTRACK_TIMESTAMP=y ++CONFIG_NF_CT_PROTO_DCCP=m ++CONFIG_NF_CT_PROTO_UDPLITE=m ++CONFIG_NF_CONNTRACK_AMANDA=m ++CONFIG_NF_CONNTRACK_FTP=m ++CONFIG_NF_CONNTRACK_H323=m ++CONFIG_NF_CONNTRACK_IRC=m ++CONFIG_NF_CONNTRACK_NETBIOS_NS=m ++CONFIG_NF_CONNTRACK_SNMP=m ++CONFIG_NF_CONNTRACK_PPTP=m ++CONFIG_NF_CONNTRACK_SANE=m ++CONFIG_NF_CONNTRACK_SIP=m ++CONFIG_NF_CONNTRACK_TFTP=m ++CONFIG_NF_CT_NETLINK=m ++CONFIG_NETFILTER_XT_SET=m ++CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m ++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m ++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m ++CONFIG_NETFILTER_XT_TARGET_DSCP=m ++CONFIG_NETFILTER_XT_TARGET_HMARK=m ++CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m ++CONFIG_NETFILTER_XT_TARGET_LED=m ++CONFIG_NETFILTER_XT_TARGET_LOG=m ++CONFIG_NETFILTER_XT_TARGET_MARK=m ++CONFIG_NETFILTER_XT_TARGET_NFLOG=m ++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m ++CONFIG_NETFILTER_XT_TARGET_NOTRACK=m ++CONFIG_NETFILTER_XT_TARGET_TEE=m ++CONFIG_NETFILTER_XT_TARGET_TPROXY=m ++CONFIG_NETFILTER_XT_TARGET_TRACE=m ++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m ++CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m ++CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m ++CONFIG_NETFILTER_XT_MATCH_BPF=m ++CONFIG_NETFILTER_XT_MATCH_CLUSTER=m ++CONFIG_NETFILTER_XT_MATCH_COMMENT=m ++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m ++CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m ++CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m ++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m ++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m ++CONFIG_NETFILTER_XT_MATCH_CPU=m ++CONFIG_NETFILTER_XT_MATCH_DCCP=m ++CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m ++CONFIG_NETFILTER_XT_MATCH_DSCP=m ++CONFIG_NETFILTER_XT_MATCH_ESP=m ++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m ++CONFIG_NETFILTER_XT_MATCH_HELPER=m ++CONFIG_NETFILTER_XT_MATCH_IPRANGE=m ++CONFIG_NETFILTER_XT_MATCH_IPVS=m ++CONFIG_NETFILTER_XT_MATCH_LENGTH=m ++CONFIG_NETFILTER_XT_MATCH_LIMIT=m ++CONFIG_NETFILTER_XT_MATCH_MAC=m ++CONFIG_NETFILTER_XT_MATCH_MARK=m ++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m ++CONFIG_NETFILTER_XT_MATCH_NFACCT=m ++CONFIG_NETFILTER_XT_MATCH_OSF=m ++CONFIG_NETFILTER_XT_MATCH_OWNER=m ++CONFIG_NETFILTER_XT_MATCH_POLICY=m ++CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m ++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m ++CONFIG_NETFILTER_XT_MATCH_QUOTA=m ++CONFIG_NETFILTER_XT_MATCH_RATEEST=m ++CONFIG_NETFILTER_XT_MATCH_REALM=m ++CONFIG_NETFILTER_XT_MATCH_RECENT=m ++CONFIG_NETFILTER_XT_MATCH_SOCKET=m ++CONFIG_NETFILTER_XT_MATCH_STATE=m ++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m ++CONFIG_NETFILTER_XT_MATCH_STRING=m ++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m ++CONFIG_NETFILTER_XT_MATCH_TIME=m ++CONFIG_NETFILTER_XT_MATCH_U32=m ++CONFIG_IP_SET=m ++CONFIG_IP_SET_BITMAP_IP=m ++CONFIG_IP_SET_BITMAP_IPMAC=m ++CONFIG_IP_SET_BITMAP_PORT=m ++CONFIG_IP_SET_HASH_IP=m ++CONFIG_IP_SET_HASH_IPPORT=m ++CONFIG_IP_SET_HASH_IPPORTIP=m ++CONFIG_IP_SET_HASH_IPPORTNET=m ++CONFIG_IP_SET_HASH_NET=m ++CONFIG_IP_SET_HASH_NETPORT=m ++CONFIG_IP_SET_HASH_NETIFACE=m ++CONFIG_IP_SET_LIST_SET=m ++CONFIG_IP_VS=m ++CONFIG_IP_VS_PROTO_TCP=y ++CONFIG_IP_VS_PROTO_UDP=y ++CONFIG_IP_VS_PROTO_ESP=y ++CONFIG_IP_VS_PROTO_AH=y ++CONFIG_IP_VS_PROTO_SCTP=y ++CONFIG_IP_VS_RR=m ++CONFIG_IP_VS_WRR=m ++CONFIG_IP_VS_LC=m ++CONFIG_IP_VS_WLC=m ++CONFIG_IP_VS_LBLC=m ++CONFIG_IP_VS_LBLCR=m ++CONFIG_IP_VS_DH=m ++CONFIG_IP_VS_SH=m ++CONFIG_IP_VS_SED=m ++CONFIG_IP_VS_NQ=m ++CONFIG_IP_VS_FTP=m ++CONFIG_IP_VS_PE_SIP=m ++CONFIG_NF_CONNTRACK_IPV4=m ++CONFIG_IP_NF_IPTABLES=m ++CONFIG_IP_NF_MATCH_AH=m ++CONFIG_IP_NF_MATCH_ECN=m ++CONFIG_IP_NF_MATCH_RPFILTER=m ++CONFIG_IP_NF_MATCH_TTL=m ++CONFIG_IP_NF_FILTER=m ++CONFIG_IP_NF_TARGET_REJECT=m ++CONFIG_IP_NF_NAT=m ++CONFIG_IP_NF_TARGET_MASQUERADE=m ++CONFIG_IP_NF_TARGET_NETMAP=m ++CONFIG_IP_NF_TARGET_REDIRECT=m ++CONFIG_IP_NF_MANGLE=m ++CONFIG_IP_NF_TARGET_CLUSTERIP=m ++CONFIG_IP_NF_TARGET_ECN=m ++CONFIG_IP_NF_TARGET_TTL=m ++CONFIG_IP_NF_RAW=m ++CONFIG_IP_NF_ARPTABLES=m ++CONFIG_IP_NF_ARPFILTER=m ++CONFIG_IP_NF_ARP_MANGLE=m ++CONFIG_NF_CONNTRACK_IPV6=m ++CONFIG_IP6_NF_IPTABLES=m ++CONFIG_IP6_NF_MATCH_AH=m ++CONFIG_IP6_NF_MATCH_EUI64=m ++CONFIG_IP6_NF_MATCH_FRAG=m ++CONFIG_IP6_NF_MATCH_OPTS=m ++CONFIG_IP6_NF_MATCH_HL=m ++CONFIG_IP6_NF_MATCH_IPV6HEADER=m ++CONFIG_IP6_NF_MATCH_MH=m ++CONFIG_IP6_NF_MATCH_RPFILTER=m ++CONFIG_IP6_NF_MATCH_RT=m ++CONFIG_IP6_NF_TARGET_HL=m ++CONFIG_IP6_NF_FILTER=m ++CONFIG_IP6_NF_TARGET_REJECT=m ++CONFIG_IP6_NF_MANGLE=m ++CONFIG_IP6_NF_RAW=m ++CONFIG_IP6_NF_NAT=m ++CONFIG_IP6_NF_TARGET_MASQUERADE=m ++CONFIG_IP6_NF_TARGET_NPT=m ++CONFIG_BRIDGE_NF_EBTABLES=m ++CONFIG_BRIDGE_EBT_BROUTE=m ++CONFIG_BRIDGE_EBT_T_FILTER=m ++CONFIG_BRIDGE_EBT_T_NAT=m ++CONFIG_BRIDGE_EBT_802_3=m ++CONFIG_BRIDGE_EBT_AMONG=m ++CONFIG_BRIDGE_EBT_ARP=m ++CONFIG_BRIDGE_EBT_IP=m ++CONFIG_BRIDGE_EBT_IP6=m ++CONFIG_BRIDGE_EBT_LIMIT=m ++CONFIG_BRIDGE_EBT_MARK=m ++CONFIG_BRIDGE_EBT_PKTTYPE=m ++CONFIG_BRIDGE_EBT_STP=m ++CONFIG_BRIDGE_EBT_VLAN=m ++CONFIG_BRIDGE_EBT_ARPREPLY=m ++CONFIG_BRIDGE_EBT_DNAT=m ++CONFIG_BRIDGE_EBT_MARK_T=m ++CONFIG_BRIDGE_EBT_REDIRECT=m ++CONFIG_BRIDGE_EBT_SNAT=m ++CONFIG_BRIDGE_EBT_LOG=m ++CONFIG_BRIDGE_EBT_NFLOG=m ++CONFIG_SCTP_COOKIE_HMAC_SHA1=y ++CONFIG_ATM=m ++CONFIG_L2TP=m ++CONFIG_L2TP_V3=y ++CONFIG_L2TP_IP=m ++CONFIG_L2TP_ETH=m ++CONFIG_BRIDGE=m ++CONFIG_VLAN_8021Q=m ++CONFIG_VLAN_8021Q_GVRP=y ++CONFIG_ATALK=m ++CONFIG_6LOWPAN=m ++CONFIG_IEEE802154=m ++CONFIG_IEEE802154_6LOWPAN=m ++CONFIG_MAC802154=m ++CONFIG_NET_SCHED=y ++CONFIG_NET_SCH_CBQ=m ++CONFIG_NET_SCH_HTB=m ++CONFIG_NET_SCH_HFSC=m ++CONFIG_NET_SCH_PRIO=m ++CONFIG_NET_SCH_MULTIQ=m ++CONFIG_NET_SCH_RED=m ++CONFIG_NET_SCH_SFB=m ++CONFIG_NET_SCH_SFQ=m ++CONFIG_NET_SCH_TEQL=m ++CONFIG_NET_SCH_TBF=m ++CONFIG_NET_SCH_GRED=m ++CONFIG_NET_SCH_DSMARK=m ++CONFIG_NET_SCH_NETEM=m ++CONFIG_NET_SCH_DRR=m ++CONFIG_NET_SCH_MQPRIO=m ++CONFIG_NET_SCH_CHOKE=m ++CONFIG_NET_SCH_QFQ=m ++CONFIG_NET_SCH_CODEL=m ++CONFIG_NET_SCH_FQ_CODEL=m ++CONFIG_NET_SCH_INGRESS=m ++CONFIG_NET_SCH_PLUG=m ++CONFIG_NET_CLS_BASIC=m ++CONFIG_NET_CLS_TCINDEX=m ++CONFIG_NET_CLS_ROUTE4=m ++CONFIG_NET_CLS_FW=m ++CONFIG_NET_CLS_U32=m ++CONFIG_CLS_U32_MARK=y ++CONFIG_NET_CLS_RSVP=m ++CONFIG_NET_CLS_RSVP6=m ++CONFIG_NET_CLS_FLOW=m ++CONFIG_NET_CLS_CGROUP=m ++CONFIG_NET_EMATCH=y ++CONFIG_NET_EMATCH_CMP=m ++CONFIG_NET_EMATCH_NBYTE=m ++CONFIG_NET_EMATCH_U32=m ++CONFIG_NET_EMATCH_META=m ++CONFIG_NET_EMATCH_TEXT=m ++CONFIG_NET_EMATCH_IPSET=m ++CONFIG_NET_CLS_ACT=y ++CONFIG_NET_ACT_POLICE=m ++CONFIG_NET_ACT_GACT=m ++CONFIG_GACT_PROB=y ++CONFIG_NET_ACT_MIRRED=m ++CONFIG_NET_ACT_IPT=m ++CONFIG_NET_ACT_NAT=m ++CONFIG_NET_ACT_PEDIT=m ++CONFIG_NET_ACT_SIMP=m ++CONFIG_NET_ACT_SKBEDIT=m ++CONFIG_NET_ACT_CSUM=m ++CONFIG_BATMAN_ADV=m ++CONFIG_OPENVSWITCH=m ++CONFIG_NET_PKTGEN=m ++CONFIG_HAMRADIO=y ++CONFIG_AX25=m ++CONFIG_NETROM=m ++CONFIG_ROSE=m ++CONFIG_MKISS=m ++CONFIG_6PACK=m ++CONFIG_BPQETHER=m ++CONFIG_BAYCOM_SER_FDX=m ++CONFIG_BAYCOM_SER_HDX=m ++CONFIG_YAM=m ++CONFIG_CAN=m ++CONFIG_CAN_VCAN=m ++CONFIG_CAN_MCP251X=m ++CONFIG_IRDA=m ++CONFIG_IRLAN=m ++CONFIG_IRNET=m ++CONFIG_IRCOMM=m ++CONFIG_IRDA_ULTRA=y ++CONFIG_IRDA_CACHE_LAST_LSAP=y ++CONFIG_IRDA_FAST_RR=y ++CONFIG_IRTTY_SIR=m ++CONFIG_KINGSUN_DONGLE=m ++CONFIG_KSDAZZLE_DONGLE=m ++CONFIG_KS959_DONGLE=m ++CONFIG_USB_IRDA=m ++CONFIG_SIGMATEL_FIR=m ++CONFIG_MCS_FIR=m ++CONFIG_BT=m ++CONFIG_BT_RFCOMM=m ++CONFIG_BT_RFCOMM_TTY=y ++CONFIG_BT_BNEP=m ++CONFIG_BT_BNEP_MC_FILTER=y ++CONFIG_BT_BNEP_PROTO_FILTER=y ++CONFIG_BT_HIDP=m ++CONFIG_BT_6LOWPAN=m ++CONFIG_BT_HCIBTUSB=m ++CONFIG_BT_HCIUART=m ++CONFIG_BT_HCIUART_3WIRE=y ++CONFIG_BT_HCIUART_BCM=y ++CONFIG_BT_HCIBCM203X=m ++CONFIG_BT_HCIBPA10X=m ++CONFIG_BT_HCIBFUSB=m ++CONFIG_BT_HCIVHCI=m ++CONFIG_BT_MRVL=m ++CONFIG_BT_MRVL_SDIO=m ++CONFIG_BT_ATH3K=m ++CONFIG_BT_WILINK=m ++CONFIG_MAC80211=m ++CONFIG_MAC80211_MESH=y ++CONFIG_WIMAX=m ++CONFIG_RFKILL=m ++CONFIG_RFKILL_INPUT=y ++CONFIG_NET_9P=m ++CONFIG_NFC=m ++CONFIG_DEVTMPFS=y ++CONFIG_DEVTMPFS_MOUNT=y ++CONFIG_DMA_CMA=y ++CONFIG_CMA_SIZE_MBYTES=5 ++CONFIG_MTD=m ++CONFIG_MTD_BLOCK=m ++CONFIG_MTD_NAND=m ++CONFIG_MTD_UBI=m ++CONFIG_OF_CONFIGFS=y ++CONFIG_ZRAM=m ++CONFIG_BLK_DEV_LOOP=y ++CONFIG_BLK_DEV_CRYPTOLOOP=m ++CONFIG_BLK_DEV_DRBD=m ++CONFIG_BLK_DEV_NBD=m ++CONFIG_BLK_DEV_RAM=y ++CONFIG_CDROM_PKTCDVD=m ++CONFIG_ATA_OVER_ETH=m ++CONFIG_EEPROM_AT24=m ++CONFIG_TI_ST=m ++CONFIG_SCSI=y ++# CONFIG_SCSI_PROC_FS is not set ++CONFIG_BLK_DEV_SD=y ++CONFIG_CHR_DEV_ST=m ++CONFIG_CHR_DEV_OSST=m ++CONFIG_BLK_DEV_SR=m ++CONFIG_CHR_DEV_SG=m ++CONFIG_SCSI_ISCSI_ATTRS=y ++CONFIG_ISCSI_TCP=m ++CONFIG_ISCSI_BOOT_SYSFS=m ++CONFIG_MD=y ++CONFIG_MD_LINEAR=m ++CONFIG_MD_RAID0=m ++CONFIG_BLK_DEV_DM=m ++CONFIG_DM_CRYPT=m ++CONFIG_DM_SNAPSHOT=m ++CONFIG_DM_THIN_PROVISIONING=m ++CONFIG_DM_MIRROR=m ++CONFIG_DM_LOG_USERSPACE=m ++CONFIG_DM_RAID=m ++CONFIG_DM_ZERO=m ++CONFIG_DM_DELAY=m ++CONFIG_NETDEVICES=y ++CONFIG_BONDING=m ++CONFIG_DUMMY=m ++CONFIG_IFB=m ++CONFIG_MACVLAN=m ++CONFIG_IPVLAN=m ++CONFIG_VXLAN=m ++CONFIG_NETCONSOLE=m ++CONFIG_TUN=m ++CONFIG_VETH=m ++CONFIG_ENC28J60=m ++CONFIG_QCA7000=m ++CONFIG_MDIO_BITBANG=m ++CONFIG_PPP=m ++CONFIG_PPP_BSDCOMP=m ++CONFIG_PPP_DEFLATE=m ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_MPPE=m ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPPOATM=m ++CONFIG_PPPOE=m ++CONFIG_PPPOL2TP=m ++CONFIG_PPP_ASYNC=m ++CONFIG_PPP_SYNC_TTY=m ++CONFIG_SLIP=m ++CONFIG_SLIP_COMPRESSED=y ++CONFIG_SLIP_SMART=y ++CONFIG_USB_CATC=m ++CONFIG_USB_KAWETH=m ++CONFIG_USB_PEGASUS=m ++CONFIG_USB_RTL8150=m ++CONFIG_USB_RTL8152=m ++CONFIG_USB_USBNET=y ++CONFIG_USB_NET_AX8817X=m ++CONFIG_USB_NET_AX88179_178A=m ++CONFIG_USB_NET_CDCETHER=m ++CONFIG_USB_NET_CDC_EEM=m ++CONFIG_USB_NET_CDC_NCM=m ++CONFIG_USB_NET_HUAWEI_CDC_NCM=m ++CONFIG_USB_NET_CDC_MBIM=m ++CONFIG_USB_NET_DM9601=m ++CONFIG_USB_NET_SR9700=m ++CONFIG_USB_NET_SR9800=m ++CONFIG_USB_NET_SMSC75XX=m ++CONFIG_USB_NET_SMSC95XX=y ++CONFIG_USB_NET_GL620A=m ++CONFIG_USB_NET_NET1080=m ++CONFIG_USB_NET_PLUSB=m ++CONFIG_USB_NET_MCS7830=m ++CONFIG_USB_NET_CDC_SUBSET=m ++CONFIG_USB_ALI_M5632=y ++CONFIG_USB_AN2720=y ++CONFIG_USB_EPSON2888=y ++CONFIG_USB_KC2190=y ++CONFIG_USB_NET_ZAURUS=m ++CONFIG_USB_NET_CX82310_ETH=m ++CONFIG_USB_NET_KALMIA=m ++CONFIG_USB_NET_QMI_WWAN=m ++CONFIG_USB_HSO=m ++CONFIG_USB_NET_INT51X1=m ++CONFIG_USB_IPHETH=m ++CONFIG_USB_SIERRA_NET=m ++CONFIG_USB_VL600=m ++CONFIG_ATH9K=m ++CONFIG_ATH9K_HTC=m ++CONFIG_CARL9170=m ++CONFIG_ATH6KL=m ++CONFIG_ATH6KL_USB=m ++CONFIG_AR5523=m ++CONFIG_AT76C50X_USB=m ++CONFIG_B43=m ++# CONFIG_B43_PHY_N is not set ++CONFIG_B43LEGACY=m ++CONFIG_BRCMFMAC=m ++CONFIG_BRCMFMAC_USB=y ++CONFIG_HOSTAP=m ++CONFIG_P54_COMMON=m ++CONFIG_P54_USB=m ++CONFIG_LIBERTAS=m ++CONFIG_LIBERTAS_USB=m ++CONFIG_LIBERTAS_SDIO=m ++CONFIG_LIBERTAS_THINFIRM=m ++CONFIG_LIBERTAS_THINFIRM_USB=m ++CONFIG_MWIFIEX=m ++CONFIG_MWIFIEX_SDIO=m ++CONFIG_MT7601U=m ++CONFIG_RT2X00=m ++CONFIG_RT2500USB=m ++CONFIG_RT73USB=m ++CONFIG_RT2800USB=m ++CONFIG_RT2800USB_RT3573=y ++CONFIG_RT2800USB_RT53XX=y ++CONFIG_RT2800USB_RT55XX=y ++CONFIG_RT2800USB_UNKNOWN=y ++CONFIG_RTL8187=m ++CONFIG_RTL8192CU=n ++CONFIG_USB_ZD1201=m ++CONFIG_ZD1211RW=m ++CONFIG_MAC80211_HWSIM=m ++CONFIG_USB_NET_RNDIS_WLAN=m ++CONFIG_WIMAX_I2400M_USB=m ++CONFIG_IEEE802154_AT86RF230=m ++CONFIG_IEEE802154_MRF24J40=m ++CONFIG_IEEE802154_CC2520=m ++CONFIG_INPUT_POLLDEV=m ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_JOYDEV=m ++CONFIG_INPUT_EVDEV=m ++# CONFIG_KEYBOARD_ATKBD is not set ++CONFIG_KEYBOARD_GPIO=m ++# CONFIG_INPUT_MOUSE is not set ++CONFIG_INPUT_JOYSTICK=y ++CONFIG_JOYSTICK_IFORCE=m ++CONFIG_JOYSTICK_IFORCE_USB=y ++CONFIG_JOYSTICK_XPAD=m ++CONFIG_JOYSTICK_XPAD_FF=y ++CONFIG_JOYSTICK_XPAD_LEDS=y ++CONFIG_JOYSTICK_RPISENSE=m ++CONFIG_INPUT_TOUCHSCREEN=y ++CONFIG_TOUCHSCREEN_ADS7846=m ++CONFIG_TOUCHSCREEN_EGALAX=m ++CONFIG_TOUCHSCREEN_FT6236=m ++CONFIG_TOUCHSCREEN_RPI_FT5406=m ++CONFIG_TOUCHSCREEN_USB_COMPOSITE=m ++CONFIG_TOUCHSCREEN_STMPE=m ++CONFIG_INPUT_MISC=y ++CONFIG_INPUT_AD714X=m ++CONFIG_INPUT_ATI_REMOTE2=m ++CONFIG_INPUT_KEYSPAN_REMOTE=m ++CONFIG_INPUT_POWERMATE=m ++CONFIG_INPUT_YEALINK=m ++CONFIG_INPUT_CM109=m ++CONFIG_INPUT_UINPUT=m ++CONFIG_INPUT_GPIO_ROTARY_ENCODER=m ++CONFIG_INPUT_ADXL34X=m ++CONFIG_INPUT_CMA3000=m ++CONFIG_SERIO=m ++CONFIG_SERIO_RAW=m ++CONFIG_GAMEPORT=m ++CONFIG_GAMEPORT_NS558=m ++CONFIG_GAMEPORT_L4=m ++CONFIG_BRCM_CHAR_DRIVERS=n ++CONFIG_BCM_VC_CMA=n ++CONFIG_BCM_VCIO=n ++CONFIG_BCM_VC_SM=n ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_DEVKMEM is not set ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set ++CONFIG_SERIAL_8250_CONSOLE=y ++# CONFIG_SERIAL_8250_DMA is not set ++CONFIG_SERIAL_8250_NR_UARTS=1 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=0 ++CONFIG_SERIAL_OF_PLATFORM=y ++CONFIG_SERIAL_AMBA_PL011=y ++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y ++CONFIG_SERIAL_SC16IS7XX=m ++CONFIG_SERIAL_SC16IS7XX_SPI=y ++CONFIG_TTY_PRINTK=y ++CONFIG_HW_RANDOM=y ++CONFIG_RAW_DRIVER=y ++CONFIG_I2C=y ++CONFIG_I2C_CHARDEV=m ++CONFIG_I2C_MUX_PCA954x=m ++CONFIG_I2C_BCM2708=m ++CONFIG_I2C_GPIO=m ++CONFIG_SPI=y ++CONFIG_SPI_BCM2835=m ++CONFIG_SPI_BCM2835AUX=m ++CONFIG_SPI_SPIDEV=y ++CONFIG_PPS=m ++CONFIG_PPS_CLIENT_LDISC=m ++CONFIG_PPS_CLIENT_GPIO=m ++CONFIG_GPIO_SYSFS=y ++CONFIG_GPIO_BCM_VIRT=y ++CONFIG_GPIO_ARIZONA=m ++CONFIG_GPIO_STMPE=y ++CONFIG_GPIO_MCP23S08=m ++CONFIG_W1=m ++CONFIG_W1_MASTER_DS2490=m ++CONFIG_W1_MASTER_DS2482=m ++CONFIG_W1_MASTER_DS1WM=m ++CONFIG_W1_MASTER_GPIO=m ++CONFIG_W1_SLAVE_THERM=m ++CONFIG_W1_SLAVE_SMEM=m ++CONFIG_W1_SLAVE_DS2408=m ++CONFIG_W1_SLAVE_DS2413=m ++CONFIG_W1_SLAVE_DS2406=m ++CONFIG_W1_SLAVE_DS2423=m ++CONFIG_W1_SLAVE_DS2431=m ++CONFIG_W1_SLAVE_DS2433=m ++CONFIG_W1_SLAVE_DS2760=m ++CONFIG_W1_SLAVE_DS2780=m ++CONFIG_W1_SLAVE_DS2781=m ++CONFIG_W1_SLAVE_DS28E04=m ++CONFIG_W1_SLAVE_BQ27000=m ++CONFIG_BATTERY_DS2760=m ++CONFIG_POWER_RESET=y ++CONFIG_POWER_RESET_GPIO=y ++CONFIG_HWMON=m ++CONFIG_SENSORS_LM75=m ++CONFIG_SENSORS_SHT21=m ++CONFIG_SENSORS_SHTC1=m ++CONFIG_THERMAL=y ++CONFIG_THERMAL_BCM2835=y ++CONFIG_WATCHDOG=y ++CONFIG_BCM2835_WDT=y ++CONFIG_UCB1400_CORE=m ++CONFIG_MFD_STMPE=y ++CONFIG_STMPE_SPI=y ++CONFIG_MFD_ARIZONA_I2C=m ++CONFIG_MFD_ARIZONA_SPI=m ++CONFIG_MFD_WM5102=y ++CONFIG_MEDIA_SUPPORT=m ++CONFIG_MEDIA_CAMERA_SUPPORT=y ++CONFIG_MEDIA_ANALOG_TV_SUPPORT=y ++CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y ++CONFIG_MEDIA_RADIO_SUPPORT=y ++CONFIG_MEDIA_RC_SUPPORT=y ++CONFIG_MEDIA_CONTROLLER=y ++CONFIG_LIRC=m ++CONFIG_RC_DEVICES=y ++CONFIG_RC_ATI_REMOTE=m ++CONFIG_IR_IMON=m ++CONFIG_IR_MCEUSB=m ++CONFIG_IR_REDRAT3=m ++CONFIG_IR_STREAMZAP=m ++CONFIG_IR_IGUANA=m ++CONFIG_IR_TTUSBIR=m ++CONFIG_RC_LOOPBACK=m ++CONFIG_IR_GPIO_CIR=m ++CONFIG_MEDIA_USB_SUPPORT=y ++CONFIG_USB_VIDEO_CLASS=m ++CONFIG_USB_M5602=m ++CONFIG_USB_STV06XX=m ++CONFIG_USB_GL860=m ++CONFIG_USB_GSPCA_BENQ=m ++CONFIG_USB_GSPCA_CONEX=m ++CONFIG_USB_GSPCA_CPIA1=m ++CONFIG_USB_GSPCA_DTCS033=m ++CONFIG_USB_GSPCA_ETOMS=m ++CONFIG_USB_GSPCA_FINEPIX=m ++CONFIG_USB_GSPCA_JEILINJ=m ++CONFIG_USB_GSPCA_JL2005BCD=m ++CONFIG_USB_GSPCA_KINECT=m ++CONFIG_USB_GSPCA_KONICA=m ++CONFIG_USB_GSPCA_MARS=m ++CONFIG_USB_GSPCA_MR97310A=m ++CONFIG_USB_GSPCA_NW80X=m ++CONFIG_USB_GSPCA_OV519=m ++CONFIG_USB_GSPCA_OV534=m ++CONFIG_USB_GSPCA_OV534_9=m ++CONFIG_USB_GSPCA_PAC207=m ++CONFIG_USB_GSPCA_PAC7302=m ++CONFIG_USB_GSPCA_PAC7311=m ++CONFIG_USB_GSPCA_SE401=m ++CONFIG_USB_GSPCA_SN9C2028=m ++CONFIG_USB_GSPCA_SN9C20X=m ++CONFIG_USB_GSPCA_SONIXB=m ++CONFIG_USB_GSPCA_SONIXJ=m ++CONFIG_USB_GSPCA_SPCA500=m ++CONFIG_USB_GSPCA_SPCA501=m ++CONFIG_USB_GSPCA_SPCA505=m ++CONFIG_USB_GSPCA_SPCA506=m ++CONFIG_USB_GSPCA_SPCA508=m ++CONFIG_USB_GSPCA_SPCA561=m ++CONFIG_USB_GSPCA_SPCA1528=m ++CONFIG_USB_GSPCA_SQ905=m ++CONFIG_USB_GSPCA_SQ905C=m ++CONFIG_USB_GSPCA_SQ930X=m ++CONFIG_USB_GSPCA_STK014=m ++CONFIG_USB_GSPCA_STK1135=m ++CONFIG_USB_GSPCA_STV0680=m ++CONFIG_USB_GSPCA_SUNPLUS=m ++CONFIG_USB_GSPCA_T613=m ++CONFIG_USB_GSPCA_TOPRO=m ++CONFIG_USB_GSPCA_TV8532=m ++CONFIG_USB_GSPCA_VC032X=m ++CONFIG_USB_GSPCA_VICAM=m ++CONFIG_USB_GSPCA_XIRLINK_CIT=m ++CONFIG_USB_GSPCA_ZC3XX=m ++CONFIG_USB_PWC=m ++CONFIG_VIDEO_CPIA2=m ++CONFIG_USB_ZR364XX=m ++CONFIG_USB_STKWEBCAM=m ++CONFIG_USB_S2255=m ++CONFIG_VIDEO_USBTV=m ++CONFIG_VIDEO_PVRUSB2=m ++CONFIG_VIDEO_HDPVR=m ++CONFIG_VIDEO_USBVISION=m ++CONFIG_VIDEO_STK1160_COMMON=m ++CONFIG_VIDEO_STK1160_AC97=y ++CONFIG_VIDEO_GO7007=m ++CONFIG_VIDEO_GO7007_USB=m ++CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m ++CONFIG_VIDEO_AU0828=m ++CONFIG_VIDEO_AU0828_RC=y ++CONFIG_VIDEO_CX231XX=m ++CONFIG_VIDEO_CX231XX_ALSA=m ++CONFIG_VIDEO_CX231XX_DVB=m ++CONFIG_VIDEO_TM6000=m ++CONFIG_VIDEO_TM6000_ALSA=m ++CONFIG_VIDEO_TM6000_DVB=m ++CONFIG_DVB_USB=m ++CONFIG_DVB_USB_A800=m ++CONFIG_DVB_USB_DIBUSB_MB=m ++CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y ++CONFIG_DVB_USB_DIBUSB_MC=m ++CONFIG_DVB_USB_DIB0700=m ++CONFIG_DVB_USB_UMT_010=m ++CONFIG_DVB_USB_CXUSB=m ++CONFIG_DVB_USB_M920X=m ++CONFIG_DVB_USB_DIGITV=m ++CONFIG_DVB_USB_VP7045=m ++CONFIG_DVB_USB_VP702X=m ++CONFIG_DVB_USB_GP8PSK=m ++CONFIG_DVB_USB_NOVA_T_USB2=m ++CONFIG_DVB_USB_TTUSB2=m ++CONFIG_DVB_USB_DTT200U=m ++CONFIG_DVB_USB_OPERA1=m ++CONFIG_DVB_USB_AF9005=m ++CONFIG_DVB_USB_AF9005_REMOTE=m ++CONFIG_DVB_USB_PCTV452E=m ++CONFIG_DVB_USB_DW2102=m ++CONFIG_DVB_USB_CINERGY_T2=m ++CONFIG_DVB_USB_DTV5100=m ++CONFIG_DVB_USB_FRIIO=m ++CONFIG_DVB_USB_AZ6027=m ++CONFIG_DVB_USB_TECHNISAT_USB2=m ++CONFIG_DVB_USB_V2=m ++CONFIG_DVB_USB_AF9015=m ++CONFIG_DVB_USB_AF9035=m ++CONFIG_DVB_USB_ANYSEE=m ++CONFIG_DVB_USB_AU6610=m ++CONFIG_DVB_USB_AZ6007=m ++CONFIG_DVB_USB_CE6230=m ++CONFIG_DVB_USB_EC168=m ++CONFIG_DVB_USB_GL861=m ++CONFIG_DVB_USB_LME2510=m ++CONFIG_DVB_USB_MXL111SF=m ++CONFIG_DVB_USB_RTL28XXU=m ++CONFIG_DVB_USB_DVBSKY=m ++CONFIG_SMS_USB_DRV=m ++CONFIG_DVB_B2C2_FLEXCOP_USB=m ++CONFIG_DVB_AS102=m ++CONFIG_VIDEO_EM28XX=m ++CONFIG_VIDEO_EM28XX_V4L2=m ++CONFIG_VIDEO_EM28XX_ALSA=m ++CONFIG_VIDEO_EM28XX_DVB=m ++CONFIG_V4L_PLATFORM_DRIVERS=y ++CONFIG_VIDEO_BCM2835=n ++CONFIG_VIDEO_BCM2835_MMAL=n ++CONFIG_RADIO_SI470X=y ++CONFIG_USB_SI470X=m ++CONFIG_I2C_SI470X=m ++CONFIG_RADIO_SI4713=m ++CONFIG_I2C_SI4713=m ++CONFIG_USB_MR800=m ++CONFIG_USB_DSBR=m ++CONFIG_RADIO_SHARK=m ++CONFIG_RADIO_SHARK2=m ++CONFIG_USB_KEENE=m ++CONFIG_USB_MA901=m ++CONFIG_RADIO_TEA5764=m ++CONFIG_RADIO_SAA7706H=m ++CONFIG_RADIO_TEF6862=m ++CONFIG_RADIO_WL1273=m ++CONFIG_RADIO_WL128X=m ++# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set ++CONFIG_VIDEO_UDA1342=m ++CONFIG_VIDEO_SONY_BTF_MPX=m ++CONFIG_VIDEO_TVP5150=m ++CONFIG_VIDEO_TW2804=m ++CONFIG_VIDEO_TW9903=m ++CONFIG_VIDEO_TW9906=m ++CONFIG_VIDEO_OV7640=m ++CONFIG_VIDEO_MT9V011=m ++CONFIG_DRM=m ++CONFIG_DRM_LOAD_EDID_FIRMWARE=y ++CONFIG_DRM_UDL=m ++CONFIG_DRM_VC4=m ++CONFIG_FB=y ++CONFIG_FB_BCM2708=y ++CONFIG_FB_UDL=m ++CONFIG_FB_SSD1307=m ++CONFIG_FB_RPISENSE=m ++# CONFIG_BACKLIGHT_GENERIC is not set ++CONFIG_BACKLIGHT_RPI=m ++CONFIG_BACKLIGHT_GPIO=m ++CONFIG_FRAMEBUFFER_CONSOLE=y ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++CONFIG_SOUND=y ++CONFIG_SND=m ++CONFIG_SND_SEQUENCER=m ++CONFIG_SND_SEQ_DUMMY=m ++CONFIG_SND_MIXER_OSS=m ++CONFIG_SND_PCM_OSS=m ++CONFIG_SND_SEQUENCER_OSS=y ++CONFIG_SND_HRTIMER=m ++CONFIG_SND_DUMMY=m ++CONFIG_SND_ALOOP=m ++CONFIG_SND_VIRMIDI=m ++CONFIG_SND_MTPAV=m ++CONFIG_SND_SERIAL_U16550=m ++CONFIG_SND_MPU401=m ++CONFIG_SND_ARM=n ++CONFIG_SND_BCM2835=n ++CONFIG_SND_USB_AUDIO=m ++CONFIG_SND_USB_UA101=m ++CONFIG_SND_USB_CAIAQ=m ++CONFIG_SND_USB_CAIAQ_INPUT=y ++CONFIG_SND_USB_6FIRE=m ++CONFIG_SND_SOC=m ++CONFIG_SND_BCM2835_SOC_I2S=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m ++CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m ++CONFIG_SND_BCM2708_SOC_RPI_DAC=m ++CONFIG_SND_BCM2708_SOC_RPI_PROTO=m ++CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m ++CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI=m ++CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m ++CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI=m ++CONFIG_SND_BCM2708_SOC_RASPIDAC3=m ++CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m ++CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m ++CONFIG_SND_DIGIDAC1_SOUNDCARD=m ++CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m ++CONFIG_SND_SOC_ADAU1701=m ++CONFIG_SND_SOC_WM8804_I2C=m ++CONFIG_SND_SIMPLE_CARD=m ++CONFIG_SOUND_PRIME=m ++CONFIG_HIDRAW=y ++CONFIG_UHID=m ++CONFIG_HID_A4TECH=m ++CONFIG_HID_ACRUX=m ++CONFIG_HID_APPLE=m ++CONFIG_HID_BELKIN=m ++CONFIG_HID_BETOP_FF=m ++CONFIG_HID_CHERRY=m ++CONFIG_HID_CHICONY=m ++CONFIG_HID_CYPRESS=m ++CONFIG_HID_DRAGONRISE=m ++CONFIG_HID_EMS_FF=m ++CONFIG_HID_ELECOM=m ++CONFIG_HID_ELO=m ++CONFIG_HID_EZKEY=m ++CONFIG_HID_GEMBIRD=m ++CONFIG_HID_HOLTEK=m ++CONFIG_HID_KEYTOUCH=m ++CONFIG_HID_KYE=m ++CONFIG_HID_UCLOGIC=m ++CONFIG_HID_WALTOP=m ++CONFIG_HID_GYRATION=m ++CONFIG_HID_TWINHAN=m ++CONFIG_HID_KENSINGTON=m ++CONFIG_HID_LCPOWER=m ++CONFIG_HID_LOGITECH=m ++CONFIG_HID_LOGITECH_DJ=m ++CONFIG_LOGITECH_FF=y ++CONFIG_LOGIRUMBLEPAD2_FF=y ++CONFIG_LOGIG940_FF=y ++CONFIG_HID_MAGICMOUSE=m ++CONFIG_HID_MICROSOFT=m ++CONFIG_HID_MONTEREY=m ++CONFIG_HID_MULTITOUCH=m ++CONFIG_HID_NTRIG=m ++CONFIG_HID_ORTEK=m ++CONFIG_HID_PANTHERLORD=m ++CONFIG_HID_PETALYNX=m ++CONFIG_HID_PICOLCD=m ++CONFIG_HID_ROCCAT=m ++CONFIG_HID_SAMSUNG=m ++CONFIG_HID_SONY=m ++CONFIG_HID_SPEEDLINK=m ++CONFIG_HID_SUNPLUS=m ++CONFIG_HID_GREENASIA=m ++CONFIG_HID_SMARTJOYPLUS=m ++CONFIG_HID_TOPSEED=m ++CONFIG_HID_THINGM=m ++CONFIG_HID_THRUSTMASTER=m ++CONFIG_HID_WACOM=m ++CONFIG_HID_WIIMOTE=m ++CONFIG_HID_XINMO=m ++CONFIG_HID_ZEROPLUS=m ++CONFIG_HID_ZYDACRON=m ++CONFIG_HID_PID=y ++CONFIG_USB_HIDDEV=y ++CONFIG_USB=y ++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y ++CONFIG_USB_MON=m ++CONFIG_USB_DWCOTG=n ++CONFIG_USB_DWC2=y ++CONFIG_USB_PRINTER=m ++CONFIG_USB_STORAGE=y ++CONFIG_USB_STORAGE_REALTEK=m ++CONFIG_USB_STORAGE_DATAFAB=m ++CONFIG_USB_STORAGE_FREECOM=m ++CONFIG_USB_STORAGE_ISD200=m ++CONFIG_USB_STORAGE_USBAT=m ++CONFIG_USB_STORAGE_SDDR09=m ++CONFIG_USB_STORAGE_SDDR55=m ++CONFIG_USB_STORAGE_JUMPSHOT=m ++CONFIG_USB_STORAGE_ALAUDA=m ++CONFIG_USB_STORAGE_ONETOUCH=m ++CONFIG_USB_STORAGE_KARMA=m ++CONFIG_USB_STORAGE_CYPRESS_ATACB=m ++CONFIG_USB_STORAGE_ENE_UB6250=m ++CONFIG_USB_MDC800=m ++CONFIG_USB_MICROTEK=m ++CONFIG_USBIP_CORE=m ++CONFIG_USBIP_VHCI_HCD=m ++CONFIG_USBIP_HOST=m ++CONFIG_USB_SERIAL=m ++CONFIG_USB_SERIAL_GENERIC=y ++CONFIG_USB_SERIAL_AIRCABLE=m ++CONFIG_USB_SERIAL_ARK3116=m ++CONFIG_USB_SERIAL_BELKIN=m ++CONFIG_USB_SERIAL_CH341=m ++CONFIG_USB_SERIAL_WHITEHEAT=m ++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m ++CONFIG_USB_SERIAL_CP210X=m ++CONFIG_USB_SERIAL_CYPRESS_M8=m ++CONFIG_USB_SERIAL_EMPEG=m ++CONFIG_USB_SERIAL_FTDI_SIO=m ++CONFIG_USB_SERIAL_VISOR=m ++CONFIG_USB_SERIAL_IPAQ=m ++CONFIG_USB_SERIAL_IR=m ++CONFIG_USB_SERIAL_EDGEPORT=m ++CONFIG_USB_SERIAL_EDGEPORT_TI=m ++CONFIG_USB_SERIAL_F81232=m ++CONFIG_USB_SERIAL_GARMIN=m ++CONFIG_USB_SERIAL_IPW=m ++CONFIG_USB_SERIAL_IUU=m ++CONFIG_USB_SERIAL_KEYSPAN_PDA=m ++CONFIG_USB_SERIAL_KEYSPAN=m ++CONFIG_USB_SERIAL_KLSI=m ++CONFIG_USB_SERIAL_KOBIL_SCT=m ++CONFIG_USB_SERIAL_MCT_U232=m ++CONFIG_USB_SERIAL_METRO=m ++CONFIG_USB_SERIAL_MOS7720=m ++CONFIG_USB_SERIAL_MOS7840=m ++CONFIG_USB_SERIAL_NAVMAN=m ++CONFIG_USB_SERIAL_PL2303=m ++CONFIG_USB_SERIAL_OTI6858=m ++CONFIG_USB_SERIAL_QCAUX=m ++CONFIG_USB_SERIAL_QUALCOMM=m ++CONFIG_USB_SERIAL_SPCP8X5=m ++CONFIG_USB_SERIAL_SAFE=m ++CONFIG_USB_SERIAL_SIERRAWIRELESS=m ++CONFIG_USB_SERIAL_SYMBOL=m ++CONFIG_USB_SERIAL_TI=m ++CONFIG_USB_SERIAL_CYBERJACK=m ++CONFIG_USB_SERIAL_XIRCOM=m ++CONFIG_USB_SERIAL_OPTION=m ++CONFIG_USB_SERIAL_OMNINET=m ++CONFIG_USB_SERIAL_OPTICON=m ++CONFIG_USB_SERIAL_XSENS_MT=m ++CONFIG_USB_SERIAL_WISHBONE=m ++CONFIG_USB_SERIAL_SSU100=m ++CONFIG_USB_SERIAL_QT2=m ++CONFIG_USB_SERIAL_DEBUG=m ++CONFIG_USB_EMI62=m ++CONFIG_USB_EMI26=m ++CONFIG_USB_ADUTUX=m ++CONFIG_USB_SEVSEG=m ++CONFIG_USB_RIO500=m ++CONFIG_USB_LEGOTOWER=m ++CONFIG_USB_LCD=m ++CONFIG_USB_CYPRESS_CY7C63=m ++CONFIG_USB_CYTHERM=m ++CONFIG_USB_IDMOUSE=m ++CONFIG_USB_FTDI_ELAN=m ++CONFIG_USB_APPLEDISPLAY=m ++CONFIG_USB_LD=m ++CONFIG_USB_TRANCEVIBRATOR=m ++CONFIG_USB_IOWARRIOR=m ++CONFIG_USB_TEST=m ++CONFIG_USB_ISIGHTFW=m ++CONFIG_USB_YUREX=m ++CONFIG_USB_ATM=m ++CONFIG_USB_SPEEDTOUCH=m ++CONFIG_USB_CXACRU=m ++CONFIG_USB_UEAGLEATM=m ++CONFIG_USB_XUSBATM=m ++CONFIG_MMC=y ++CONFIG_MMC_BLOCK_MINORS=32 ++CONFIG_MMC_BCM2835=y ++CONFIG_MMC_BCM2835_DMA=y ++CONFIG_MMC_BCM2835_SDHOST=y ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_PLTFM=y ++CONFIG_MMC_SPI=m ++CONFIG_LEDS_CLASS=y ++CONFIG_LEDS_GPIO=y ++CONFIG_LEDS_TRIGGER_TIMER=y ++CONFIG_LEDS_TRIGGER_ONESHOT=y ++CONFIG_LEDS_TRIGGER_HEARTBEAT=y ++CONFIG_LEDS_TRIGGER_BACKLIGHT=y ++CONFIG_LEDS_TRIGGER_CPU=y ++CONFIG_LEDS_TRIGGER_GPIO=y ++CONFIG_LEDS_TRIGGER_DEFAULT_ON=y ++CONFIG_LEDS_TRIGGER_TRANSIENT=m ++CONFIG_LEDS_TRIGGER_CAMERA=m ++CONFIG_LEDS_TRIGGER_INPUT=y ++CONFIG_LEDS_TRIGGER_PANIC=y ++CONFIG_RTC_CLASS=y ++# CONFIG_RTC_HCTOSYS is not set ++CONFIG_RTC_DRV_DS1307=m ++CONFIG_RTC_DRV_DS1374=m ++CONFIG_RTC_DRV_DS1672=m ++CONFIG_RTC_DRV_MAX6900=m ++CONFIG_RTC_DRV_RS5C372=m ++CONFIG_RTC_DRV_ISL1208=m ++CONFIG_RTC_DRV_ISL12022=m ++CONFIG_RTC_DRV_ISL12057=m ++CONFIG_RTC_DRV_X1205=m ++CONFIG_RTC_DRV_PCF8523=m ++CONFIG_RTC_DRV_PCF8563=m ++CONFIG_RTC_DRV_PCF8583=m ++CONFIG_RTC_DRV_M41T80=m ++CONFIG_RTC_DRV_BQ32K=m ++CONFIG_RTC_DRV_S35390A=m ++CONFIG_RTC_DRV_FM3130=m ++CONFIG_RTC_DRV_RX8581=m ++CONFIG_RTC_DRV_RX8025=m ++CONFIG_RTC_DRV_EM3027=m ++CONFIG_RTC_DRV_M41T93=m ++CONFIG_RTC_DRV_M41T94=m ++CONFIG_RTC_DRV_DS1302=m ++CONFIG_RTC_DRV_DS1305=m ++CONFIG_RTC_DRV_DS1390=m ++CONFIG_RTC_DRV_R9701=m ++CONFIG_RTC_DRV_RX4581=m ++CONFIG_RTC_DRV_RS5C348=m ++CONFIG_RTC_DRV_MAX6902=m ++CONFIG_RTC_DRV_PCF2123=m ++CONFIG_RTC_DRV_DS3232=m ++CONFIG_RTC_DRV_PCF2127=m ++CONFIG_RTC_DRV_RV3029C2=m ++CONFIG_DMADEVICES=y ++CONFIG_DMA_BCM2835=y ++CONFIG_DMA_BCM2708=y ++CONFIG_UIO=m ++CONFIG_UIO_PDRV_GENIRQ=m ++CONFIG_STAGING=y ++CONFIG_PRISM2_USB=m ++CONFIG_R8712U=m ++CONFIG_R8188EU=m ++CONFIG_R8723AU=m ++CONFIG_VT6656=m ++CONFIG_SPEAKUP=m ++CONFIG_SPEAKUP_SYNTH_SOFT=m ++CONFIG_STAGING_MEDIA=y ++CONFIG_LIRC_STAGING=y ++CONFIG_LIRC_IMON=m ++CONFIG_LIRC_RPI=m ++CONFIG_LIRC_SASEM=m ++CONFIG_LIRC_SERIAL=m ++CONFIG_FB_TFT=m ++CONFIG_FB_TFT_AGM1264K_FL=m ++CONFIG_FB_TFT_BD663474=m ++CONFIG_FB_TFT_HX8340BN=m ++CONFIG_FB_TFT_HX8347D=m ++CONFIG_FB_TFT_HX8353D=m ++CONFIG_FB_TFT_ILI9163=m ++CONFIG_FB_TFT_ILI9320=m ++CONFIG_FB_TFT_ILI9325=m ++CONFIG_FB_TFT_ILI9340=m ++CONFIG_FB_TFT_ILI9341=m ++CONFIG_FB_TFT_ILI9481=m ++CONFIG_FB_TFT_ILI9486=m ++CONFIG_FB_TFT_PCD8544=m ++CONFIG_FB_TFT_RA8875=m ++CONFIG_FB_TFT_S6D02A1=m ++CONFIG_FB_TFT_S6D1121=m ++CONFIG_FB_TFT_SSD1289=m ++CONFIG_FB_TFT_SSD1306=m ++CONFIG_FB_TFT_SSD1331=m ++CONFIG_FB_TFT_SSD1351=m ++CONFIG_FB_TFT_ST7735R=m ++CONFIG_FB_TFT_TINYLCD=m ++CONFIG_FB_TFT_TLS8204=m ++CONFIG_FB_TFT_UC1701=m ++CONFIG_FB_TFT_UPD161704=m ++CONFIG_FB_TFT_WATTEROTT=m ++CONFIG_FB_FLEX=m ++CONFIG_FB_TFT_FBTFT_DEVICE=m ++CONFIG_MAILBOX=y ++CONFIG_BCM2835_MBOX=y ++# CONFIG_IOMMU_SUPPORT is not set ++CONFIG_RASPBERRYPI_POWER=y ++CONFIG_EXTCON=m ++CONFIG_EXTCON_ARIZONA=m ++CONFIG_IIO=m ++CONFIG_IIO_BUFFER=y ++CONFIG_IIO_BUFFER_CB=m ++CONFIG_IIO_KFIFO_BUF=m ++CONFIG_MCP320X=m ++CONFIG_MCP3422=m ++CONFIG_DHT11=m ++CONFIG_PWM_BCM2835=m ++CONFIG_PWM_PCA9685=m ++CONFIG_RASPBERRYPI_FIRMWARE=y ++CONFIG_EXT4_FS=y ++CONFIG_EXT4_FS_POSIX_ACL=y ++CONFIG_EXT4_FS_SECURITY=y ++CONFIG_REISERFS_FS=m ++CONFIG_REISERFS_FS_XATTR=y ++CONFIG_REISERFS_FS_POSIX_ACL=y ++CONFIG_REISERFS_FS_SECURITY=y ++CONFIG_JFS_FS=m ++CONFIG_JFS_POSIX_ACL=y ++CONFIG_JFS_SECURITY=y ++CONFIG_JFS_STATISTICS=y ++CONFIG_XFS_FS=m ++CONFIG_XFS_QUOTA=y ++CONFIG_XFS_POSIX_ACL=y ++CONFIG_XFS_RT=y ++CONFIG_GFS2_FS=m ++CONFIG_OCFS2_FS=m ++CONFIG_BTRFS_FS=m ++CONFIG_BTRFS_FS_POSIX_ACL=y ++CONFIG_NILFS2_FS=m ++CONFIG_F2FS_FS=y ++CONFIG_FANOTIFY=y ++CONFIG_QFMT_V1=m ++CONFIG_QFMT_V2=m ++CONFIG_AUTOFS4_FS=y ++CONFIG_FUSE_FS=m ++CONFIG_CUSE=m ++CONFIG_OVERLAY_FS=m ++CONFIG_FSCACHE=y ++CONFIG_FSCACHE_STATS=y ++CONFIG_FSCACHE_HISTOGRAM=y ++CONFIG_CACHEFILES=y ++CONFIG_ISO9660_FS=m ++CONFIG_JOLIET=y ++CONFIG_ZISOFS=y ++CONFIG_UDF_FS=m ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_IOCHARSET="ascii" ++CONFIG_NTFS_FS=m ++CONFIG_NTFS_RW=y ++CONFIG_TMPFS=y ++CONFIG_TMPFS_POSIX_ACL=y ++CONFIG_ECRYPT_FS=m ++CONFIG_HFS_FS=m ++CONFIG_HFSPLUS_FS=m ++CONFIG_JFFS2_FS=m ++CONFIG_JFFS2_SUMMARY=y ++CONFIG_UBIFS_FS=m ++CONFIG_SQUASHFS=m ++CONFIG_SQUASHFS_XATTR=y ++CONFIG_SQUASHFS_LZO=y ++CONFIG_SQUASHFS_XZ=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3_ACL=y ++CONFIG_NFS_V4=y ++CONFIG_NFS_SWAP=y ++CONFIG_ROOT_NFS=y ++CONFIG_NFS_FSCACHE=y ++CONFIG_NFSD=m ++CONFIG_NFSD_V3_ACL=y ++CONFIG_NFSD_V4=y ++CONFIG_CIFS=m ++CONFIG_CIFS_WEAK_PW_HASH=y ++CONFIG_CIFS_UPCALL=y ++CONFIG_CIFS_XATTR=y ++CONFIG_CIFS_POSIX=y ++CONFIG_CIFS_ACL=y ++CONFIG_CIFS_DFS_UPCALL=y ++CONFIG_CIFS_SMB2=y ++CONFIG_CIFS_FSCACHE=y ++CONFIG_9P_FS=m ++CONFIG_9P_FS_POSIX_ACL=y ++CONFIG_NLS_DEFAULT="utf8" ++CONFIG_NLS_CODEPAGE_437=y ++CONFIG_NLS_CODEPAGE_737=m ++CONFIG_NLS_CODEPAGE_775=m ++CONFIG_NLS_CODEPAGE_850=m ++CONFIG_NLS_CODEPAGE_852=m ++CONFIG_NLS_CODEPAGE_855=m ++CONFIG_NLS_CODEPAGE_857=m ++CONFIG_NLS_CODEPAGE_860=m ++CONFIG_NLS_CODEPAGE_861=m ++CONFIG_NLS_CODEPAGE_862=m ++CONFIG_NLS_CODEPAGE_863=m ++CONFIG_NLS_CODEPAGE_864=m ++CONFIG_NLS_CODEPAGE_865=m ++CONFIG_NLS_CODEPAGE_866=m ++CONFIG_NLS_CODEPAGE_869=m ++CONFIG_NLS_CODEPAGE_936=m ++CONFIG_NLS_CODEPAGE_950=m ++CONFIG_NLS_CODEPAGE_932=m ++CONFIG_NLS_CODEPAGE_949=m ++CONFIG_NLS_CODEPAGE_874=m ++CONFIG_NLS_ISO8859_8=m ++CONFIG_NLS_CODEPAGE_1250=m ++CONFIG_NLS_CODEPAGE_1251=m ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=m ++CONFIG_NLS_ISO8859_2=m ++CONFIG_NLS_ISO8859_3=m ++CONFIG_NLS_ISO8859_4=m ++CONFIG_NLS_ISO8859_5=m ++CONFIG_NLS_ISO8859_6=m ++CONFIG_NLS_ISO8859_7=m ++CONFIG_NLS_ISO8859_9=m ++CONFIG_NLS_ISO8859_13=m ++CONFIG_NLS_ISO8859_14=m ++CONFIG_NLS_ISO8859_15=m ++CONFIG_NLS_KOI8_R=m ++CONFIG_NLS_KOI8_U=m ++CONFIG_DLM=m ++CONFIG_PRINTK_TIME=y ++CONFIG_BOOT_PRINTK_DELAY=y ++CONFIG_DEBUG_MEMORY_INIT=y ++CONFIG_DETECT_HUNG_TASK=y ++CONFIG_TIMER_STATS=y ++CONFIG_IRQSOFF_TRACER=y ++CONFIG_SCHED_TRACER=y ++CONFIG_STACK_TRACER=y ++CONFIG_BLK_DEV_IO_TRACE=y ++# CONFIG_KPROBE_EVENT is not set ++CONFIG_FUNCTION_PROFILER=y ++CONFIG_KGDB=y ++CONFIG_KGDB_KDB=y ++CONFIG_KDB_KEYBOARD=y ++CONFIG_CRYPTO_USER=m ++CONFIG_CRYPTO_CBC=y ++CONFIG_CRYPTO_CTS=m ++CONFIG_CRYPTO_XTS=m ++CONFIG_CRYPTO_XCBC=m ++CONFIG_CRYPTO_TGR192=m ++CONFIG_CRYPTO_WP512=m ++CONFIG_CRYPTO_CAST5=m ++CONFIG_CRYPTO_DES=y ++CONFIG_CRYPTO_USER_API_SKCIPHER=m ++CONFIG_ARM64_CRYPTO=y ++CONFIG_CRC_ITU_T=y ++CONFIG_LIBCRC32C=y ++CONFIG_BCM2708_VCHIQ=n diff --git a/target/linux/brcm2708/patches-4.9/950-0095-vchiq_arm-Tweak-the-logging-output.patch b/target/linux/brcm2708/patches-4.9/950-0095-vchiq_arm-Tweak-the-logging-output.patch new file mode 100644 index 000000000000..ef3c97ddc39b --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0095-vchiq_arm-Tweak-the-logging-output.patch @@ -0,0 +1,75 @@ +From 60486e8778192830c0e5369d4f05954c1f7cc12c Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 7 Mar 2016 15:05:11 +0000 +Subject: [PATCH] vchiq_arm: Tweak the logging output + +Signed-off-by: Phil Elwell +--- + .../vc04_services/interface/vchiq_arm/vchiq_core.c | 31 +++++++++------------- + 1 file changed, 13 insertions(+), 18 deletions(-) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c +@@ -891,16 +891,14 @@ queue_message(VCHIQ_STATE_T *state, VCHI + error_count); + return VCHIQ_ERROR; + } +- if (i == 0) { +- if (SRVTRACE_ENABLED(service, +- VCHIQ_LOG_INFO)) +- vchiq_log_dump_mem("Sent", 0, +- header->data + pos, +- min(64u, +- elements[0].size)); +- } + } + ++ if (SRVTRACE_ENABLED(service, ++ VCHIQ_LOG_INFO)) ++ vchiq_log_dump_mem("Sent", 0, ++ header->data, ++ min(16, pos)); ++ + spin_lock("a_spinlock); + service_quota->message_use_count++; + +@@ -1039,16 +1037,13 @@ queue_message_sync(VCHIQ_STATE_T *state, + error_count); + return VCHIQ_ERROR; + } +- if (i == 0) { +- if (vchiq_sync_log_level >= +- VCHIQ_LOG_TRACE) +- vchiq_log_dump_mem("Sent Sync", +- 0, header->data + pos, +- min(64u, +- elements[0].size)); +- } + } + ++ if (vchiq_sync_log_level >= VCHIQ_LOG_TRACE) ++ vchiq_log_dump_mem("Sent Sync", ++ 0, header->data, ++ min(16, pos)); ++ + VCHIQ_SERVICE_STATS_INC(service, ctrl_tx_count); + VCHIQ_SERVICE_STATS_ADD(service, ctrl_tx_bytes, size); + } else { +@@ -1720,7 +1715,7 @@ parse_rx_slots(VCHIQ_STATE_T *state) + remoteport, localport, size); + if (size > 0) + vchiq_log_dump_mem("Rcvd", 0, header->data, +- min(64, size)); ++ min(16, size)); + } + + if (((unsigned int)header & VCHIQ_SLOT_MASK) + calc_stride(size) +@@ -2187,7 +2182,7 @@ sync_func(void *v) + remoteport, localport, size); + if (size > 0) + vchiq_log_dump_mem("Rcvd", 0, header->data, +- min(64, size)); ++ min(16, size)); + } + + switch (type) { diff --git a/target/linux/brcm2708/patches-4.9/950-0096-vchiq_arm-Access-the-dequeue_pending-flag-locked.patch b/target/linux/brcm2708/patches-4.9/950-0096-vchiq_arm-Access-the-dequeue_pending-flag-locked.patch new file mode 100644 index 000000000000..71c0e304dd4e --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0096-vchiq_arm-Access-the-dequeue_pending-flag-locked.patch @@ -0,0 +1,58 @@ +From 64e39b18b8d51eb332a84ef79ed3ce0dd2a76808 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 23 Mar 2016 14:16:25 +0000 +Subject: [PATCH] vchiq_arm: Access the dequeue_pending flag locked + +Reading through this code looking for another problem (now found in userland) +the use of dequeue_pending outside a lock didn't seem safe. + +Signed-off-by: Phil Elwell +--- + .../vc04_services/interface/vchiq_arm/vchiq_arm.c | 17 ++++++++++++----- + 1 file changed, 12 insertions(+), 5 deletions(-) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -279,6 +279,7 @@ service_callback(VCHIQ_REASON_T reason, + USER_SERVICE_T *user_service; + VCHIQ_SERVICE_T *service; + VCHIQ_INSTANCE_T instance; ++ int skip_completion = 0; + DEBUG_INITIALISE(g_state.local) + + DEBUG_TRACE(SERVICE_CALLBACK_LINE); +@@ -345,9 +346,6 @@ service_callback(VCHIQ_REASON_T reason, + user_service->msg_queue[user_service->msg_insert & + (MSG_QUEUE_SIZE - 1)] = header; + user_service->msg_insert++; +- spin_unlock(&msg_queue_spinlock); +- +- up(&user_service->insert_event); + + /* If there is a thread waiting in DEQUEUE_MESSAGE, or if + ** there is a MESSAGE_AVAILABLE in the completion queue then +@@ -356,13 +354,22 @@ service_callback(VCHIQ_REASON_T reason, + if (((user_service->message_available_pos - + instance->completion_remove) >= 0) || + user_service->dequeue_pending) { +- DEBUG_TRACE(SERVICE_CALLBACK_LINE); + user_service->dequeue_pending = 0; +- return VCHIQ_SUCCESS; ++ skip_completion = 1; + } + ++ spin_unlock(&msg_queue_spinlock); ++ ++ up(&user_service->insert_event); ++ + header = NULL; + } ++ ++ if (skip_completion) { ++ DEBUG_TRACE(SERVICE_CALLBACK_LINE); ++ return VCHIQ_SUCCESS; ++ } ++ + DEBUG_TRACE(SERVICE_CALLBACK_LINE); + + return add_completion(instance, reason, header, user_service, diff --git a/target/linux/brcm2708/patches-4.9/950-0097-vchiq_arm-Service-callbacks-must-not-fail.patch b/target/linux/brcm2708/patches-4.9/950-0097-vchiq_arm-Service-callbacks-must-not-fail.patch new file mode 100644 index 000000000000..f60af85307f3 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0097-vchiq_arm-Service-callbacks-must-not-fail.patch @@ -0,0 +1,26 @@ +From e518e4dcd42f5a9e3b32a3a54c258320c4752d7e Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 23 Mar 2016 20:53:47 +0000 +Subject: [PATCH] vchiq_arm: Service callbacks must not fail + +Service callbacks are not allowed to return an error. The internal callback +that delivers events and messages to user tasks does not enqueue them if +the service is closing, but this is not an error and should not be +reported as such. + +Signed-off-by: Phil Elwell +--- + drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -224,7 +224,7 @@ add_completion(VCHIQ_INSTANCE_T instance + } else if (instance->closing) { + vchiq_log_info(vchiq_arm_log_level, + "service_callback closing"); +- return VCHIQ_ERROR; ++ return VCHIQ_SUCCESS; + } + DEBUG_TRACE(SERVICE_CALLBACK_LINE); + } diff --git a/target/linux/brcm2708/patches-4.9/950-0098-vchiq_arm-Add-completion-records-under-the-mutex.patch b/target/linux/brcm2708/patches-4.9/950-0098-vchiq_arm-Add-completion-records-under-the-mutex.patch new file mode 100644 index 000000000000..1b8647e86a82 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0098-vchiq_arm-Add-completion-records-under-the-mutex.patch @@ -0,0 +1,63 @@ +From 152fc9447942bad4e2c6c1e6b86fd252689cc596 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 21 Apr 2016 13:49:32 +0100 +Subject: [PATCH] vchiq_arm: Add completion records under the mutex + +An issue was observed when flushing openmax components +which generate a large number of messages returning +buffers to host. + +We occasionally found a duplicate message from 16 +messages prior, resulting in a buffer returned twice. + +While only one thread adds completions, without the +mutex you don't get the protection of the automatic +memory barrier you get with synchronisation objects. + +Signed-off-by: Phil Elwell +--- + .../staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 13 ++++++++++++- + 1 file changed, 12 insertions(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -210,6 +210,8 @@ add_completion(VCHIQ_INSTANCE_T instance + VCHIQ_COMPLETION_DATA_T *completion; + DEBUG_INITIALISE(g_state.local) + ++ mutex_lock(&instance->completion_mutex); ++ + while (instance->completion_insert == + (instance->completion_remove + MAX_COMPLETIONS)) { + /* Out of space - wait for the client */ +@@ -217,11 +219,17 @@ add_completion(VCHIQ_INSTANCE_T instance + vchiq_log_trace(vchiq_arm_log_level, + "add_completion - completion queue full"); + DEBUG_COUNT(COMPLETION_QUEUE_FULL_COUNT); ++ ++ mutex_unlock(&instance->completion_mutex); + if (down_interruptible(&instance->remove_event) != 0) { + vchiq_log_info(vchiq_arm_log_level, + "service_callback interrupted"); + return VCHIQ_RETRY; +- } else if (instance->closing) { ++ } ++ ++ mutex_lock(&instance->completion_mutex); ++ if (instance->closing) { ++ mutex_unlock(&instance->completion_mutex); + vchiq_log_info(vchiq_arm_log_level, + "service_callback closing"); + return VCHIQ_SUCCESS; +@@ -254,8 +262,11 @@ add_completion(VCHIQ_INSTANCE_T instance + if (reason == VCHIQ_MESSAGE_AVAILABLE) + user_service->message_available_pos = + instance->completion_insert; ++ + instance->completion_insert++; + ++ mutex_unlock(&instance->completion_mutex); ++ + up(&instance->insert_event); + + return VCHIQ_SUCCESS; diff --git a/target/linux/brcm2708/patches-4.9/950-0099-vchiq_arm-Avoid-use-of-mutex-in-add_completion.patch b/target/linux/brcm2708/patches-4.9/950-0099-vchiq_arm-Avoid-use-of-mutex-in-add_completion.patch new file mode 100644 index 000000000000..c8cc5b78378b --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0099-vchiq_arm-Avoid-use-of-mutex-in-add_completion.patch @@ -0,0 +1,192 @@ +From 965475a1620ba1c4f19d6585925a40e3c749d7d1 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 20 Jun 2016 13:51:44 +0100 +Subject: [PATCH] vchiq_arm: Avoid use of mutex in add_completion + +Claiming the completion_mutex within add_completion did prevent some +messages appearing twice, but provokes a deadlock caused by vcsm using +vchiq within a page fault handler. + +Revert the use of completion_mutex, and instead fix the original +problem using more memory barriers. + +Signed-off-by: Phil Elwell +--- + .../vc04_services/interface/vchiq_arm/vchiq_arm.c | 55 +++++++++++----------- + .../vc04_services/interface/vchiq_arm/vchiq_core.c | 14 ++++-- + 2 files changed, 37 insertions(+), 32 deletions(-) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -64,10 +64,10 @@ + #define VCHIQ_MINOR 0 + + /* Some per-instance constants */ +-#define MAX_COMPLETIONS 16 ++#define MAX_COMPLETIONS 128 + #define MAX_SERVICES 64 + #define MAX_ELEMENTS 8 +-#define MSG_QUEUE_SIZE 64 ++#define MSG_QUEUE_SIZE 128 + + #define KEEPALIVE_VER 1 + #define KEEPALIVE_VER_MIN KEEPALIVE_VER +@@ -208,28 +208,24 @@ add_completion(VCHIQ_INSTANCE_T instance + void *bulk_userdata) + { + VCHIQ_COMPLETION_DATA_T *completion; ++ int insert; + DEBUG_INITIALISE(g_state.local) + +- mutex_lock(&instance->completion_mutex); +- +- while (instance->completion_insert == +- (instance->completion_remove + MAX_COMPLETIONS)) { ++ insert = instance->completion_insert; ++ while ((insert - instance->completion_remove) >= MAX_COMPLETIONS) { + /* Out of space - wait for the client */ + DEBUG_TRACE(SERVICE_CALLBACK_LINE); + vchiq_log_trace(vchiq_arm_log_level, + "add_completion - completion queue full"); + DEBUG_COUNT(COMPLETION_QUEUE_FULL_COUNT); + +- mutex_unlock(&instance->completion_mutex); + if (down_interruptible(&instance->remove_event) != 0) { + vchiq_log_info(vchiq_arm_log_level, + "service_callback interrupted"); + return VCHIQ_RETRY; + } + +- mutex_lock(&instance->completion_mutex); + if (instance->closing) { +- mutex_unlock(&instance->completion_mutex); + vchiq_log_info(vchiq_arm_log_level, + "service_callback closing"); + return VCHIQ_SUCCESS; +@@ -237,9 +233,7 @@ add_completion(VCHIQ_INSTANCE_T instance + DEBUG_TRACE(SERVICE_CALLBACK_LINE); + } + +- completion = +- &instance->completions[instance->completion_insert & +- (MAX_COMPLETIONS - 1)]; ++ completion = &instance->completions[insert & (MAX_COMPLETIONS - 1)]; + + completion->header = header; + completion->reason = reason; +@@ -260,12 +254,9 @@ add_completion(VCHIQ_INSTANCE_T instance + wmb(); + + if (reason == VCHIQ_MESSAGE_AVAILABLE) +- user_service->message_available_pos = +- instance->completion_insert; +- +- instance->completion_insert++; ++ user_service->message_available_pos = insert; + +- mutex_unlock(&instance->completion_mutex); ++ instance->completion_insert = ++insert; + + up(&instance->insert_event); + +@@ -795,6 +786,7 @@ vchiq_ioctl(struct file *file, unsigned + instance->completion_insert) + && !instance->closing) { + int rc; ++ + DEBUG_TRACE(AWAIT_COMPLETION_LINE); + mutex_unlock(&instance->completion_mutex); + rc = down_interruptible(&instance->insert_event); +@@ -809,24 +801,29 @@ vchiq_ioctl(struct file *file, unsigned + } + DEBUG_TRACE(AWAIT_COMPLETION_LINE); + +- /* A read memory barrier is needed to stop prefetch of a stale +- ** completion record +- */ +- rmb(); +- + if (ret == 0) { + int msgbufcount = args.msgbufcount; ++ int remove; ++ ++ remove = instance->completion_remove; ++ + for (ret = 0; ret < args.count; ret++) { + VCHIQ_COMPLETION_DATA_T *completion; + VCHIQ_SERVICE_T *service; + USER_SERVICE_T *user_service; + VCHIQ_HEADER_T *header; +- if (instance->completion_remove == +- instance->completion_insert) ++ ++ if (remove == instance->completion_insert) + break; ++ + completion = &instance->completions[ +- instance->completion_remove & +- (MAX_COMPLETIONS - 1)]; ++ remove & (MAX_COMPLETIONS - 1)]; ++ ++ ++ /* A read memory barrier is needed to prevent ++ ** the prefetch of a stale completion record ++ */ ++ rmb(); + + service = completion->service_userdata; + user_service = service->base.userdata; +@@ -903,7 +900,11 @@ vchiq_ioctl(struct file *file, unsigned + break; + } + +- instance->completion_remove++; ++ /* Ensure that the above copy has completed ++ ** before advancing the remove pointer. */ ++ mb(); ++ ++ instance->completion_remove = ++remove; + } + + if (msgbufcount != args.msgbufcount) { +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c +@@ -610,15 +610,15 @@ process_free_queue(VCHIQ_STATE_T *state) + BITSET_T service_found[BITSET_SIZE(VCHIQ_MAX_SERVICES)]; + int slot_queue_available; + +- /* Use a read memory barrier to ensure that any state that may have +- ** been modified by another thread is not masked by stale prefetched +- ** values. */ +- rmb(); +- + /* Find slots which have been freed by the other side, and return them + ** to the available queue. */ + slot_queue_available = state->slot_queue_available; + ++ /* Use a memory barrier to ensure that any state that may have been ++ ** modified by another thread is not masked by stale prefetched ++ ** values. */ ++ mb(); ++ + while (slot_queue_available != local->slot_queue_recycle) { + unsigned int pos; + int slot_index = local->slot_queue[slot_queue_available++ & +@@ -626,6 +626,8 @@ process_free_queue(VCHIQ_STATE_T *state) + char *data = (char *)SLOT_DATA_FROM_INDEX(state, slot_index); + int data_found = 0; + ++ rmb(); ++ + vchiq_log_trace(vchiq_core_log_level, "%d: pfq %d=%x %x %x", + state->id, slot_index, (unsigned int)data, + local->slot_queue_recycle, slot_queue_available); +@@ -741,6 +743,8 @@ process_free_queue(VCHIQ_STATE_T *state) + up(&state->data_quota_event); + } + ++ mb(); ++ + state->slot_queue_available = slot_queue_available; + up(&state->slot_available_event); + } diff --git a/target/linux/brcm2708/patches-4.9/950-0100-staging-vchi-Convert-to-current-get_user_pages-argum.patch b/target/linux/brcm2708/patches-4.9/950-0100-staging-vchi-Convert-to-current-get_user_pages-argum.patch new file mode 100644 index 000000000000..e80c414633a8 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0100-staging-vchi-Convert-to-current-get_user_pages-argum.patch @@ -0,0 +1,34 @@ +From ec643be82b145a65d9c78d24eea7470b9bb6e0c4 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 3 Oct 2016 10:14:10 -0700 +Subject: [PATCH] staging/vchi: Convert to current get_user_pages() arguments. + +Signed-off-by: Eric Anholt +--- + drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c | 2 +- + drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 3 +-- + 2 files changed, 2 insertions(+), 3 deletions(-) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c +@@ -420,7 +420,7 @@ create_pagelist(char __user *buf, size_t + *need_release = 0; /* do not try and release vmalloc pages */ + } else { + down_read(&task->mm->mmap_sem); +- actual_pages = get_user_pages(task, task->mm, ++ actual_pages = get_user_pages( + (unsigned long)buf & ~(PAGE_SIZE - 1), + num_pages, + (type == PAGELIST_READ) ? FOLL_WRITE : 0, +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -1492,8 +1492,7 @@ dump_phys_mem(void *virt_addr, uint32_t + } + + down_read(¤t->mm->mmap_sem); +- rc = get_user_pages(current, /* task */ +- current->mm, /* mm */ ++ rc = get_user_pages( + (unsigned long)virt_addr, /* start */ + num_pages, /* len */ + 0, /* gup_flags */ diff --git a/target/linux/brcm2708/patches-4.9/950-0101-staging-vchi-Update-for-rename-of-page_cache_release.patch b/target/linux/brcm2708/patches-4.9/950-0101-staging-vchi-Update-for-rename-of-page_cache_release.patch new file mode 100644 index 000000000000..eccb792ee9cd --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0101-staging-vchi-Update-for-rename-of-page_cache_release.patch @@ -0,0 +1,43 @@ +From 5e8386a65d2b7fd157d2a6e2f9b8ca79011976b7 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 3 Oct 2016 10:16:03 -0700 +Subject: [PATCH] staging/vchi: Update for rename of page_cache_release() to + put_page(). + +Signed-off-by: Eric Anholt +--- + drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c | 4 ++-- + drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 2 +- + 2 files changed, 3 insertions(+), 3 deletions(-) + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c +@@ -438,7 +438,7 @@ create_pagelist(char __user *buf, size_t + while (actual_pages > 0) + { + actual_pages--; +- page_cache_release(pages[actual_pages]); ++ put_page(pages[actual_pages]); + } + kfree(pagelist); + if (actual_pages == 0) +@@ -577,7 +577,7 @@ free_pagelist(PAGELIST_T *pagelist, int + offset = 0; + set_page_dirty(pg); + } +- page_cache_release(pg); ++ put_page(pg); + } + } + +--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c ++++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +@@ -1530,7 +1530,7 @@ dump_phys_mem(void *virt_addr, uint32_t + kunmap(page); + + for (page_idx = 0; page_idx < num_pages; page_idx++) +- page_cache_release(pages[page_idx]); ++ put_page(pages[page_idx]); + + kfree(pages); + } diff --git a/target/linux/brcm2708/patches-4.9/950-0102-drivers-vchi-Remove-dependency-on-CONFIG_BROKEN.patch b/target/linux/brcm2708/patches-4.9/950-0102-drivers-vchi-Remove-dependency-on-CONFIG_BROKEN.patch new file mode 100644 index 000000000000..8ec807e0654b --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0102-drivers-vchi-Remove-dependency-on-CONFIG_BROKEN.patch @@ -0,0 +1,22 @@ +From b909c0f36c535e3f3042517d1b59b9c0538cc1d0 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 3 Oct 2016 10:21:17 -0700 +Subject: [PATCH] drivers/vchi: Remove dependency on CONFIG_BROKEN. + +The driver builds now. + +Signed-off-by: Eric Anholt +--- + drivers/staging/vc04_services/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/vc04_services/Kconfig ++++ b/drivers/staging/vc04_services/Kconfig +@@ -1,6 +1,6 @@ + config BCM2708_VCHIQ + tristate "Videocore VCHIQ" +- depends on RASPBERRYPI_FIRMWARE && BROKEN ++ depends on RASPBERRYPI_FIRMWARE + default y + help + Kernel to VideoCore communication interface for the diff --git a/target/linux/brcm2708/patches-4.9/950-0103-raspberrypi-firmware-Export-the-general-transaction-.patch b/target/linux/brcm2708/patches-4.9/950-0103-raspberrypi-firmware-Export-the-general-transaction-.patch new file mode 100644 index 000000000000..a316b409c4eb --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0103-raspberrypi-firmware-Export-the-general-transaction-.patch @@ -0,0 +1,42 @@ +From 34454ca8cf9b63b0973fb23271810461a45a9884 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 14 Sep 2016 09:16:19 +0100 +Subject: [PATCH] raspberrypi-firmware: Export the general transaction + function. + +The vc4-firmware-kms module is going to be doing the MBOX FB call. + +Signed-off-by: Eric Anholt +--- + drivers/firmware/raspberrypi.c | 3 ++- + include/soc/bcm2835/raspberrypi-firmware.h | 1 + + 2 files changed, 3 insertions(+), 1 deletion(-) + +--- a/drivers/firmware/raspberrypi.c ++++ b/drivers/firmware/raspberrypi.c +@@ -42,7 +42,7 @@ static void response_callback(struct mbo + * Sends a request to the firmware through the BCM2835 mailbox driver, + * and synchronously waits for the reply. + */ +-static int ++int + rpi_firmware_transaction(struct rpi_firmware *fw, u32 chan, u32 data) + { + u32 message = MBOX_MSG(chan, data); +@@ -63,6 +63,7 @@ rpi_firmware_transaction(struct rpi_firm + + return ret; + } ++EXPORT_SYMBOL_GPL(rpi_firmware_transaction); + + /** + * rpi_firmware_property_list - Submit firmware property list +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -131,5 +131,6 @@ int rpi_firmware_property(struct rpi_fir + int rpi_firmware_property_list(struct rpi_firmware *fw, + void *data, size_t tag_size); + struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node); ++int rpi_firmware_transaction(struct rpi_firmware *fw, u32 chan, u32 data); + + #endif /* __SOC_RASPBERRY_FIRMWARE_H__ */ diff --git a/target/linux/brcm2708/patches-4.9/950-0104-raspberrypi-firmware-Define-the-MBOX-channel-in-the-.patch b/target/linux/brcm2708/patches-4.9/950-0104-raspberrypi-firmware-Define-the-MBOX-channel-in-the-.patch new file mode 100644 index 000000000000..0b9ef718230f --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0104-raspberrypi-firmware-Define-the-MBOX-channel-in-the-.patch @@ -0,0 +1,21 @@ +From bf20c77c459b00873d5862cfe7ba745a543d53de Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 14 Sep 2016 09:18:09 +0100 +Subject: [PATCH] raspberrypi-firmware: Define the MBOX channel in the header. + +Signed-off-by: Eric Anholt +--- + include/soc/bcm2835/raspberrypi-firmware.h | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -12,6 +12,8 @@ + #include + #include + ++#define RPI_FIRMWARE_CHAN_FB 1 ++ + struct rpi_firmware; + + enum rpi_firmware_property_status { diff --git a/target/linux/brcm2708/patches-4.9/950-0105-drm-vc4-Add-a-mode-for-using-the-closed-firmware-for.patch b/target/linux/brcm2708/patches-4.9/950-0105-drm-vc4-Add-a-mode-for-using-the-closed-firmware-for.patch new file mode 100644 index 000000000000..88952dc0c0da --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0105-drm-vc4-Add-a-mode-for-using-the-closed-firmware-for.patch @@ -0,0 +1,758 @@ +From ffd9952ec22321af8e891aa4cf9d79d90c4b23b6 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 14 Sep 2016 08:39:33 +0100 +Subject: [PATCH] drm/vc4: Add a mode for using the closed firmware for + display. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/Makefile | 1 + + drivers/gpu/drm/vc4/vc4_crtc.c | 13 + + drivers/gpu/drm/vc4/vc4_drv.c | 1 + + drivers/gpu/drm/vc4/vc4_drv.h | 7 + + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 660 +++++++++++++++++++++++++++++++++ + 5 files changed, 682 insertions(+) + create mode 100644 drivers/gpu/drm/vc4/vc4_firmware_kms.c + +--- a/drivers/gpu/drm/vc4/Makefile ++++ b/drivers/gpu/drm/vc4/Makefile +@@ -8,6 +8,7 @@ vc4-y := \ + vc4_crtc.o \ + vc4_drv.o \ + vc4_dpi.o \ ++ vc4_firmware_kms.o \ + vc4_kms.o \ + vc4_gem.o \ + vc4_hdmi.o \ +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -163,6 +163,9 @@ int vc4_crtc_get_scanoutpos(struct drm_d + int vblank_lines; + int ret = 0; + ++ if (vc4->firmware_kms) ++ return 0; ++ + /* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */ + + /* Get optional system timestamp before query. */ +@@ -656,6 +659,11 @@ int vc4_enable_vblank(struct drm_device + struct vc4_dev *vc4 = to_vc4_dev(dev); + struct vc4_crtc *vc4_crtc = vc4->crtc[crtc_id]; + ++ if (vc4->firmware_kms) { ++ /* XXX: Can we mask the SMI interrupt? */ ++ return 0; ++ } ++ + CRTC_WRITE(PV_INTEN, PV_INT_VFP_START); + + return 0; +@@ -666,6 +674,11 @@ void vc4_disable_vblank(struct drm_devic + struct vc4_dev *vc4 = to_vc4_dev(dev); + struct vc4_crtc *vc4_crtc = vc4->crtc[crtc_id]; + ++ if (vc4->firmware_kms) { ++ /* XXX: Can we mask the SMI interrupt? */ ++ return; ++ } ++ + CRTC_WRITE(PV_INTEN, 0); + } + +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -292,6 +292,7 @@ static struct platform_driver *const com + &vc4_dpi_driver, + &vc4_hvs_driver, + &vc4_crtc_driver, ++ &vc4_firmware_kms_driver, + &vc4_v3d_driver, + }; + +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -12,6 +12,9 @@ + struct vc4_dev { + struct drm_device *dev; + ++ bool firmware_kms; ++ struct rpi_firmware *firmware; ++ + struct vc4_hdmi *hdmi; + struct vc4_hvs *hvs; + struct vc4_crtc *crtc[3]; +@@ -460,6 +463,10 @@ void __iomem *vc4_ioremap_regs(struct pl + extern struct platform_driver vc4_dpi_driver; + int vc4_dpi_debugfs_regs(struct seq_file *m, void *unused); + ++/* vc4_firmware_kms.c */ ++extern struct platform_driver vc4_firmware_kms_driver; ++void vc4_fkms_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file); ++ + /* vc4_gem.c */ + void vc4_gem_init(struct drm_device *dev); + void vc4_gem_destroy(struct drm_device *dev); +--- /dev/null ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -0,0 +1,660 @@ ++/* ++ * Copyright (C) 2016 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++/** ++ * DOC: VC4 firmware KMS module. ++ * ++ * As a hack to get us from the current closed source driver world ++ * toward a totally open stack, implement KMS on top of the Raspberry ++ * Pi's firmware display stack. ++ */ ++ ++#include "drm_atomic.h" ++#include "drm_atomic_helper.h" ++#include "drm_plane_helper.h" ++#include "drm_crtc_helper.h" ++#include "linux/clk.h" ++#include "linux/debugfs.h" ++#include "drm_fb_cma_helper.h" ++#include "linux/component.h" ++#include "linux/of_device.h" ++#include "vc4_drv.h" ++#include "vc4_regs.h" ++#include ++ ++/* The firmware delivers a vblank interrupt to us through the SMI ++ * hardware, which has only this one register. ++ */ ++#define SMICS 0x0 ++#define SMICS_INTERRUPTS (BIT(9) | BIT(10) | BIT(11)) ++ ++struct vc4_crtc { ++ struct drm_crtc base; ++ struct drm_encoder *encoder; ++ struct drm_connector *connector; ++ void __iomem *regs; ++ ++ struct drm_pending_vblank_event *event; ++}; ++ ++static inline struct vc4_crtc *to_vc4_crtc(struct drm_crtc *crtc) ++{ ++ return container_of(crtc, struct vc4_crtc, base); ++} ++ ++struct vc4_fkms_encoder { ++ struct drm_encoder base; ++}; ++ ++static inline struct vc4_fkms_encoder * ++to_vc4_fkms_encoder(struct drm_encoder *encoder) ++{ ++ return container_of(encoder, struct vc4_fkms_encoder, base); ++} ++ ++/* VC4 FKMS connector KMS struct */ ++struct vc4_fkms_connector { ++ struct drm_connector base; ++ ++ /* Since the connector is attached to just the one encoder, ++ * this is the reference to it so we can do the best_encoder() ++ * hook. ++ */ ++ struct drm_encoder *encoder; ++}; ++ ++static inline struct vc4_fkms_connector * ++to_vc4_fkms_connector(struct drm_connector *connector) ++{ ++ return container_of(connector, struct vc4_fkms_connector, base); ++} ++ ++/* Firmware's structure for making an FB mbox call. */ ++struct fbinfo_s { ++ u32 xres, yres, xres_virtual, yres_virtual; ++ u32 pitch, bpp; ++ u32 xoffset, yoffset; ++ u32 base; ++ u32 screen_size; ++ u16 cmap[256]; ++}; ++ ++struct vc4_fkms_plane { ++ struct drm_plane base; ++ struct fbinfo_s *fbinfo; ++ dma_addr_t fbinfo_bus_addr; ++ u32 pitch; ++}; ++ ++static inline struct vc4_fkms_plane *to_vc4_fkms_plane(struct drm_plane *plane) ++{ ++ return (struct vc4_fkms_plane *)plane; ++} ++ ++/* Turns the display on/off. */ ++static int vc4_plane_set_primary_blank(struct drm_plane *plane, bool blank) ++{ ++ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); ++ ++ u32 packet = blank; ++ return rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_FRAMEBUFFER_BLANK, ++ &packet, sizeof(packet)); ++} ++ ++static void vc4_primary_plane_atomic_update(struct drm_plane *plane, ++ struct drm_plane_state *old_state) ++{ ++ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); ++ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); ++ struct drm_plane_state *state = plane->state; ++ struct drm_framebuffer *fb = state->fb; ++ struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); ++ volatile struct fbinfo_s *fbinfo = vc4_plane->fbinfo; ++ u32 bpp = 32; ++ int ret; ++ ++ vc4_plane_set_primary_blank(plane, false); ++ ++ fbinfo->xres = state->crtc_w; ++ fbinfo->yres = state->crtc_h; ++ fbinfo->xres_virtual = state->crtc_w; ++ fbinfo->yres_virtual = state->crtc_h; ++ fbinfo->bpp = bpp; ++ fbinfo->xoffset = state->crtc_x; ++ fbinfo->yoffset = state->crtc_y; ++ fbinfo->base = bo->paddr + fb->offsets[0]; ++ fbinfo->pitch = fb->pitches[0]; ++ /* A bug in the firmware makes it so that if the fb->base is ++ * set to nonzero, the configured pitch gets overwritten with ++ * the previous pitch. So, to get the configured pitch ++ * recomputed, we have to make it allocate itself a new buffer ++ * in VC memory, first. ++ */ ++ if (vc4_plane->pitch != fb->pitches[0]) { ++ u32 saved_base = fbinfo->base; ++ fbinfo->base = 0; ++ ++ ret = rpi_firmware_transaction(vc4->firmware, ++ RPI_FIRMWARE_CHAN_FB, ++ vc4_plane->fbinfo_bus_addr); ++ fbinfo->base = saved_base; ++ ++ vc4_plane->pitch = fbinfo->pitch; ++ WARN_ON_ONCE(vc4_plane->pitch != fb->pitches[0]); ++ } ++ ++ ret = rpi_firmware_transaction(vc4->firmware, ++ RPI_FIRMWARE_CHAN_FB, ++ vc4_plane->fbinfo_bus_addr); ++ WARN_ON_ONCE(fbinfo->pitch != fb->pitches[0]); ++ WARN_ON_ONCE(fbinfo->base != bo->paddr + fb->offsets[0]); ++} ++ ++static void vc4_primary_plane_atomic_disable(struct drm_plane *plane, ++ struct drm_plane_state *old_state) ++{ ++ vc4_plane_set_primary_blank(plane, true); ++} ++ ++static void vc4_cursor_plane_atomic_update(struct drm_plane *plane, ++ struct drm_plane_state *old_state) ++{ ++ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); ++ struct drm_plane_state *state = plane->state; ++ struct drm_framebuffer *fb = state->fb; ++ struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0); ++ int ret; ++ u32 packet_state[] = { true, state->crtc_x, state->crtc_y, 0 }; ++ u32 packet_info[] = { state->crtc_w, state->crtc_h, ++ 0, /* unused */ ++ bo->paddr + fb->offsets[0], ++ 0, 0, /* hotx, hoty */}; ++ WARN_ON_ONCE(fb->pitches[0] != state->crtc_w * 4); ++ WARN_ON_ONCE(fb->bits_per_pixel != 32); ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_SET_CURSOR_STATE, ++ &packet_state, ++ sizeof(packet_state)); ++ if (ret || packet_state[0] != 0) ++ DRM_ERROR("Failed to set cursor state: 0x%08x\n", packet_state[0]); ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_SET_CURSOR_INFO, ++ &packet_info, ++ sizeof(packet_info)); ++ if (ret || packet_info[0] != 0) ++ DRM_ERROR("Failed to set cursor info: 0x%08x\n", packet_info[0]); ++} ++ ++static void vc4_cursor_plane_atomic_disable(struct drm_plane *plane, ++ struct drm_plane_state *old_state) ++{ ++ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); ++ u32 packet_state[] = { false, 0, 0, 0 }; ++ int ret; ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_SET_CURSOR_STATE, ++ &packet_state, ++ sizeof(packet_state)); ++ if (ret || packet_state[0] != 0) ++ DRM_ERROR("Failed to set cursor state: 0x%08x\n", packet_state[0]); ++} ++ ++static int vc4_plane_atomic_check(struct drm_plane *plane, ++ struct drm_plane_state *state) ++{ ++ return 0; ++} ++ ++static void vc4_plane_destroy(struct drm_plane *plane) ++{ ++ drm_plane_helper_disable(plane); ++ drm_plane_cleanup(plane); ++} ++ ++static const struct drm_plane_funcs vc4_plane_funcs = { ++ .update_plane = drm_atomic_helper_update_plane, ++ .disable_plane = drm_atomic_helper_disable_plane, ++ .destroy = vc4_plane_destroy, ++ .set_property = NULL, ++ .reset = drm_atomic_helper_plane_reset, ++ .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, ++}; ++ ++static const struct drm_plane_helper_funcs vc4_primary_plane_helper_funcs = { ++ .prepare_fb = NULL, ++ .cleanup_fb = NULL, ++ .atomic_check = vc4_plane_atomic_check, ++ .atomic_update = vc4_primary_plane_atomic_update, ++ .atomic_disable = vc4_primary_plane_atomic_disable, ++}; ++ ++static const struct drm_plane_helper_funcs vc4_cursor_plane_helper_funcs = { ++ .prepare_fb = NULL, ++ .cleanup_fb = NULL, ++ .atomic_check = vc4_plane_atomic_check, ++ .atomic_update = vc4_cursor_plane_atomic_update, ++ .atomic_disable = vc4_cursor_plane_atomic_disable, ++}; ++ ++static struct drm_plane *vc4_fkms_plane_init(struct drm_device *dev, ++ enum drm_plane_type type) ++{ ++ struct drm_plane *plane = NULL; ++ struct vc4_fkms_plane *vc4_plane; ++ u32 xrgb8888 = DRM_FORMAT_XRGB8888; ++ u32 argb8888 = DRM_FORMAT_ARGB8888; ++ int ret = 0; ++ bool primary = (type == DRM_PLANE_TYPE_PRIMARY); ++ ++ vc4_plane = devm_kzalloc(dev->dev, sizeof(*vc4_plane), ++ GFP_KERNEL); ++ if (!vc4_plane) { ++ ret = -ENOMEM; ++ goto fail; ++ } ++ ++ plane = &vc4_plane->base; ++ ret = drm_universal_plane_init(dev, plane, 0xff, ++ &vc4_plane_funcs, ++ primary ? &xrgb8888 : &argb8888, 1, ++ type, NULL); ++ ++ if (type == DRM_PLANE_TYPE_PRIMARY) { ++ vc4_plane->fbinfo = ++ dma_alloc_coherent(dev->dev, ++ sizeof(*vc4_plane->fbinfo), ++ &vc4_plane->fbinfo_bus_addr, ++ GFP_KERNEL); ++ memset(vc4_plane->fbinfo, 0, sizeof(*vc4_plane->fbinfo)); ++ ++ drm_plane_helper_add(plane, &vc4_primary_plane_helper_funcs); ++ } else { ++ drm_plane_helper_add(plane, &vc4_cursor_plane_helper_funcs); ++ } ++ ++ return plane; ++fail: ++ if (plane) ++ vc4_plane_destroy(plane); ++ ++ return ERR_PTR(ret); ++} ++ ++static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc) ++{ ++ /* Everyting is handled in the planes. */ ++} ++ ++static void vc4_crtc_disable(struct drm_crtc *crtc) ++{ ++} ++ ++static void vc4_crtc_enable(struct drm_crtc *crtc) ++{ ++} ++ ++static int vc4_crtc_atomic_check(struct drm_crtc *crtc, ++ struct drm_crtc_state *state) ++{ ++ return 0; ++} ++ ++static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, ++ struct drm_crtc_state *old_state) ++{ ++} ++ ++static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) ++{ ++ struct drm_crtc *crtc = &vc4_crtc->base; ++ struct drm_device *dev = crtc->dev; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ if (vc4_crtc->event) { ++ drm_crtc_send_vblank_event(crtc, vc4_crtc->event); ++ vc4_crtc->event = NULL; ++ drm_crtc_vblank_put(crtc); ++ } ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++} ++ ++static irqreturn_t vc4_crtc_irq_handler(int irq, void *data) ++{ ++ struct vc4_crtc *vc4_crtc = data; ++ u32 stat = readl(vc4_crtc->regs + SMICS); ++ irqreturn_t ret = IRQ_NONE; ++ ++ if (stat & SMICS_INTERRUPTS) { ++ writel(0, vc4_crtc->regs + SMICS); ++ drm_crtc_handle_vblank(&vc4_crtc->base); ++ vc4_crtc_handle_page_flip(vc4_crtc); ++ ret = IRQ_HANDLED; ++ } ++ ++ return ret; ++} ++ ++static int vc4_page_flip(struct drm_crtc *crtc, ++ struct drm_framebuffer *fb, ++ struct drm_pending_vblank_event *event, ++ uint32_t flags) ++{ ++ if (flags & DRM_MODE_PAGE_FLIP_ASYNC) { ++ DRM_ERROR("Async flips aren't allowed\n"); ++ return -EINVAL; ++ } ++ ++ return drm_atomic_helper_page_flip(crtc, fb, event, flags); ++} ++ ++static const struct drm_crtc_funcs vc4_crtc_funcs = { ++ .set_config = drm_atomic_helper_set_config, ++ .destroy = drm_crtc_cleanup, ++ .page_flip = vc4_page_flip, ++ .set_property = NULL, ++ .cursor_set = NULL, /* handled by drm_mode_cursor_universal */ ++ .cursor_move = NULL, /* handled by drm_mode_cursor_universal */ ++ .reset = drm_atomic_helper_crtc_reset, ++ .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, ++}; ++ ++static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = { ++ .mode_set_nofb = vc4_crtc_mode_set_nofb, ++ .disable = vc4_crtc_disable, ++ .enable = vc4_crtc_enable, ++ .atomic_check = vc4_crtc_atomic_check, ++ .atomic_flush = vc4_crtc_atomic_flush, ++}; ++ ++/* Frees the page flip event when the DRM device is closed with the ++ * event still outstanding. ++ */ ++void vc4_fkms_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file) ++{ ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ struct drm_device *dev = crtc->dev; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ ++ if (vc4_crtc->event && vc4_crtc->event->base.file_priv == file) { ++ kfree(&vc4_crtc->event->base); ++ drm_crtc_vblank_put(crtc); ++ vc4_crtc->event = NULL; ++ } ++ ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++} ++ ++static const struct of_device_id vc4_firmware_kms_dt_match[] = { ++ { .compatible = "raspberrypi,rpi-firmware-kms" }, ++ {} ++}; ++ ++static enum drm_connector_status ++vc4_fkms_connector_detect(struct drm_connector *connector, bool force) ++{ ++ return connector_status_connected; ++} ++ ++static int vc4_fkms_connector_get_modes(struct drm_connector *connector) ++{ ++ struct drm_device *dev = connector->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); ++ u32 wh[2] = {0, 0}; ++ int ret; ++ struct drm_display_mode *mode; ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT, ++ &wh, sizeof(wh)); ++ if (ret) { ++ DRM_ERROR("Failed to get screen size: %d (0x%08x 0x%08x)\n", ++ ret, wh[0], wh[1]); ++ return 0; ++ } ++ ++ mode = drm_cvt_mode(dev, wh[0], wh[1], 60 /* vrefresh */, ++ 0, 0, false); ++ drm_mode_probed_add(connector, mode); ++ ++ return 1; ++} ++ ++static struct drm_encoder * ++vc4_fkms_connector_best_encoder(struct drm_connector *connector) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); ++ return fkms_connector->encoder; ++} ++ ++static void vc4_fkms_connector_destroy(struct drm_connector *connector) ++{ ++ drm_connector_unregister(connector); ++ drm_connector_cleanup(connector); ++} ++ ++static const struct drm_connector_funcs vc4_fkms_connector_funcs = { ++ .dpms = drm_atomic_helper_connector_dpms, ++ .detect = vc4_fkms_connector_detect, ++ .fill_modes = drm_helper_probe_single_connector_modes, ++ .destroy = vc4_fkms_connector_destroy, ++ .reset = drm_atomic_helper_connector_reset, ++ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, ++}; ++ ++static const struct drm_connector_helper_funcs vc4_fkms_connector_helper_funcs = { ++ .get_modes = vc4_fkms_connector_get_modes, ++ .best_encoder = vc4_fkms_connector_best_encoder, ++}; ++ ++static struct drm_connector *vc4_fkms_connector_init(struct drm_device *dev, ++ struct drm_encoder *encoder) ++{ ++ struct drm_connector *connector = NULL; ++ struct vc4_fkms_connector *fkms_connector; ++ int ret = 0; ++ ++ fkms_connector = devm_kzalloc(dev->dev, sizeof(*fkms_connector), ++ GFP_KERNEL); ++ if (!fkms_connector) { ++ ret = -ENOMEM; ++ goto fail; ++ } ++ connector = &fkms_connector->base; ++ ++ fkms_connector->encoder = encoder; ++ ++ drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, ++ DRM_MODE_CONNECTOR_HDMIA); ++ drm_connector_helper_add(connector, &vc4_fkms_connector_helper_funcs); ++ ++ connector->polled = (DRM_CONNECTOR_POLL_CONNECT | ++ DRM_CONNECTOR_POLL_DISCONNECT); ++ ++ connector->interlace_allowed = 0; ++ connector->doublescan_allowed = 0; ++ ++ drm_mode_connector_attach_encoder(connector, encoder); ++ ++ return connector; ++ ++ fail: ++ if (connector) ++ vc4_fkms_connector_destroy(connector); ++ ++ return ERR_PTR(ret); ++} ++ ++static void vc4_fkms_encoder_destroy(struct drm_encoder *encoder) ++{ ++ drm_encoder_cleanup(encoder); ++} ++ ++static const struct drm_encoder_funcs vc4_fkms_encoder_funcs = { ++ .destroy = vc4_fkms_encoder_destroy, ++}; ++ ++static void vc4_fkms_encoder_enable(struct drm_encoder *encoder) ++{ ++} ++ ++static void vc4_fkms_encoder_disable(struct drm_encoder *encoder) ++{ ++} ++ ++static const struct drm_encoder_helper_funcs vc4_fkms_encoder_helper_funcs = { ++ .enable = vc4_fkms_encoder_enable, ++ .disable = vc4_fkms_encoder_disable, ++}; ++ ++static int vc4_fkms_bind(struct device *dev, struct device *master, void *data) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct drm_device *drm = dev_get_drvdata(master); ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ struct vc4_crtc *vc4_crtc; ++ struct vc4_fkms_encoder *vc4_encoder; ++ struct drm_crtc *crtc; ++ struct drm_plane *primary_plane, *cursor_plane, *destroy_plane, *temp; ++ struct device_node *firmware_node; ++ int ret; ++ ++ vc4->firmware_kms = true; ++ ++ vc4_crtc = devm_kzalloc(dev, sizeof(*vc4_crtc), GFP_KERNEL); ++ if (!vc4_crtc) ++ return -ENOMEM; ++ crtc = &vc4_crtc->base; ++ ++ firmware_node = of_parse_phandle(dev->of_node, "brcm,firmware", 0); ++ vc4->firmware = rpi_firmware_get(firmware_node); ++ if (!vc4->firmware) { ++ DRM_DEBUG("Failed to get Raspberry Pi firmware reference.\n"); ++ return -EPROBE_DEFER; ++ } ++ of_node_put(firmware_node); ++ ++ /* Map the SMI interrupt reg */ ++ vc4_crtc->regs = vc4_ioremap_regs(pdev, 0); ++ if (IS_ERR(vc4_crtc->regs)) ++ return PTR_ERR(vc4_crtc->regs); ++ ++ /* For now, we create just the primary and the legacy cursor ++ * planes. We should be able to stack more planes on easily, ++ * but to do that we would need to compute the bandwidth ++ * requirement of the plane configuration, and reject ones ++ * that will take too much. ++ */ ++ primary_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_PRIMARY); ++ if (IS_ERR(primary_plane)) { ++ dev_err(dev, "failed to construct primary plane\n"); ++ ret = PTR_ERR(primary_plane); ++ goto err; ++ } ++ ++ cursor_plane = vc4_fkms_plane_init(drm, DRM_PLANE_TYPE_CURSOR); ++ if (IS_ERR(cursor_plane)) { ++ dev_err(dev, "failed to construct cursor plane\n"); ++ ret = PTR_ERR(cursor_plane); ++ goto err; ++ } ++ ++ drm_crtc_init_with_planes(drm, crtc, primary_plane, cursor_plane, ++ &vc4_crtc_funcs, NULL); ++ drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs); ++ primary_plane->crtc = crtc; ++ cursor_plane->crtc = crtc; ++ vc4->crtc[drm_crtc_index(crtc)] = vc4_crtc; ++ ++ vc4_encoder = devm_kzalloc(dev, sizeof(*vc4_encoder), GFP_KERNEL); ++ if (!vc4_encoder) ++ return -ENOMEM; ++ vc4_crtc->encoder = &vc4_encoder->base; ++ vc4_encoder->base.possible_crtcs |= drm_crtc_mask(crtc) ; ++ drm_encoder_init(drm, &vc4_encoder->base, &vc4_fkms_encoder_funcs, ++ DRM_MODE_ENCODER_TMDS, NULL); ++ drm_encoder_helper_add(&vc4_encoder->base, ++ &vc4_fkms_encoder_helper_funcs); ++ ++ vc4_crtc->connector = vc4_fkms_connector_init(drm, &vc4_encoder->base); ++ if (IS_ERR(vc4_crtc->connector)) { ++ ret = PTR_ERR(vc4_crtc->connector); ++ goto err_destroy_encoder; ++ } ++ ++ writel(0, vc4_crtc->regs + SMICS); ++ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), ++ vc4_crtc_irq_handler, 0, "vc4 firmware kms", ++ vc4_crtc); ++ if (ret) ++ goto err_destroy_connector; ++ ++ platform_set_drvdata(pdev, vc4_crtc); ++ ++ return 0; ++ ++err_destroy_connector: ++ vc4_fkms_connector_destroy(vc4_crtc->connector); ++err_destroy_encoder: ++ vc4_fkms_encoder_destroy(vc4_crtc->encoder); ++ list_for_each_entry_safe(destroy_plane, temp, ++ &drm->mode_config.plane_list, head) { ++ if (destroy_plane->possible_crtcs == 1 << drm_crtc_index(crtc)) ++ destroy_plane->funcs->destroy(destroy_plane); ++ } ++err: ++ return ret; ++} ++ ++static void vc4_fkms_unbind(struct device *dev, struct device *master, ++ void *data) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct vc4_crtc *vc4_crtc = dev_get_drvdata(dev); ++ ++ vc4_fkms_connector_destroy(vc4_crtc->connector); ++ vc4_fkms_encoder_destroy(vc4_crtc->encoder); ++ drm_crtc_cleanup(&vc4_crtc->base); ++ ++ platform_set_drvdata(pdev, NULL); ++} ++ ++static const struct component_ops vc4_fkms_ops = { ++ .bind = vc4_fkms_bind, ++ .unbind = vc4_fkms_unbind, ++}; ++ ++static int vc4_fkms_probe(struct platform_device *pdev) ++{ ++ return component_add(&pdev->dev, &vc4_fkms_ops); ++} ++ ++static int vc4_fkms_remove(struct platform_device *pdev) ++{ ++ component_del(&pdev->dev, &vc4_fkms_ops); ++ return 0; ++} ++ ++struct platform_driver vc4_firmware_kms_driver = { ++ .probe = vc4_fkms_probe, ++ .remove = vc4_fkms_remove, ++ .driver = { ++ .name = "vc4_firmware_kms", ++ .of_match_table = vc4_firmware_kms_dt_match, ++ }, ++}; diff --git a/target/linux/brcm2708/patches-4.9/950-0106-i2c-bcm2835-Fix-hang-for-writing-messages-larger-tha.patch b/target/linux/brcm2708/patches-4.9/950-0106-i2c-bcm2835-Fix-hang-for-writing-messages-larger-tha.patch new file mode 100644 index 000000000000..899c75e0dbe2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0106-i2c-bcm2835-Fix-hang-for-writing-messages-larger-tha.patch @@ -0,0 +1,90 @@ +From 89b466914a0d49f08d00be25556ba22497b9a284 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= +Date: Sat, 17 Sep 2016 15:07:10 +0200 +Subject: [PATCH] i2c: bcm2835: Fix hang for writing messages larger than 16 + bytes +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Writing messages larger than the FIFO size results in a hang, rendering +the machine unusable. This is because the RXD status flag is set on the +first interrupt which results in bcm2835_drain_rxfifo() stealing bytes +from the buffer. The controller continues to trigger interrupts waiting +for the missing bytes, but bcm2835_fill_txfifo() has none to give. +In this situation wait_for_completion_timeout() apparently is unable to +stop the madness. + +The BCM2835 ARM Peripherals datasheet has this to say about the flags: + TXD: is set when the FIFO has space for at least one byte of data. + RXD: is set when the FIFO contains at least one byte of data. + TXW: is set during a write transfer and the FIFO is less than full. + RXR: is set during a read transfer and the FIFO is or more full. + +Implementing the logic from the downstream i2c-bcm2708 driver solved +the hang problem. + +Signed-off-by: Noralf Trønnes +Reviewed-by: Eric Anholt +Reviewed-by: Martin Sperl +--- + drivers/i2c/busses/i2c-bcm2835.c | 22 ++++++++++++++-------- + 1 file changed, 14 insertions(+), 8 deletions(-) + +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -64,6 +64,7 @@ struct bcm2835_i2c_dev { + int irq; + struct i2c_adapter adapter; + struct completion completion; ++ struct i2c_msg *curr_msg; + u32 msg_err; + u8 *msg_buf; + size_t msg_buf_remaining; +@@ -126,14 +127,13 @@ static irqreturn_t bcm2835_i2c_isr(int t + return IRQ_HANDLED; + } + +- if (val & BCM2835_I2C_S_RXD) { +- bcm2835_drain_rxfifo(i2c_dev); +- if (!(val & BCM2835_I2C_S_DONE)) +- return IRQ_HANDLED; +- } +- + if (val & BCM2835_I2C_S_DONE) { +- if (i2c_dev->msg_buf_remaining) ++ if (i2c_dev->curr_msg->flags & I2C_M_RD) { ++ bcm2835_drain_rxfifo(i2c_dev); ++ val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S); ++ } ++ ++ if ((val & BCM2835_I2C_S_RXD) || i2c_dev->msg_buf_remaining) + i2c_dev->msg_err = BCM2835_I2C_S_LEN; + else + i2c_dev->msg_err = 0; +@@ -141,11 +141,16 @@ static irqreturn_t bcm2835_i2c_isr(int t + return IRQ_HANDLED; + } + +- if (val & BCM2835_I2C_S_TXD) { ++ if (val & BCM2835_I2C_S_TXW) { + bcm2835_fill_txfifo(i2c_dev); + return IRQ_HANDLED; + } + ++ if (val & BCM2835_I2C_S_RXR) { ++ bcm2835_drain_rxfifo(i2c_dev); ++ return IRQ_HANDLED; ++ } ++ + return IRQ_NONE; + } + +@@ -155,6 +160,7 @@ static int bcm2835_i2c_xfer_msg(struct b + u32 c; + unsigned long time_left; + ++ i2c_dev->curr_msg = msg; + i2c_dev->msg_buf = msg->buf; + i2c_dev->msg_buf_remaining = msg->len; + reinit_completion(&i2c_dev->completion); diff --git a/target/linux/brcm2708/patches-4.9/950-0107-i2c-bcm2835-Protect-against-unexpected-TXW-RXR-inter.patch b/target/linux/brcm2708/patches-4.9/950-0107-i2c-bcm2835-Protect-against-unexpected-TXW-RXR-inter.patch new file mode 100644 index 000000000000..6646d77944e2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0107-i2c-bcm2835-Protect-against-unexpected-TXW-RXR-inter.patch @@ -0,0 +1,124 @@ +From 8feb8081c74d15ce368baa42981ca98e77800c03 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= +Date: Fri, 23 Sep 2016 18:24:38 +0200 +Subject: [PATCH] i2c: bcm2835: Protect against unexpected TXW/RXR interrupts +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +If an unexpected TXW or RXR interrupt occurs (msg_buf_remaining == 0), +the driver has no way to fill/drain the FIFO to stop the interrupts. +In this case the controller has to be disabled and the transfer +completed to avoid hang. + +(CLKT | ERR) and DONE interrupts are completed in their own paths, and +the controller is disabled in the transfer function after completion. +Unite the code paths and do disabling inside the interrupt routine. + +Clear interrupt status bits in the united completion path instead of +trying to do it on every interrupt which isn't necessary. +Only CLKT, ERR and DONE can be cleared that way. + +Add the status value to the error value in case of TXW/RXR errors to +distinguish them from the other S_LEN error. + +Signed-off-by: Noralf Trønnes +Reviewed-by: Eric Anholt +--- + drivers/i2c/busses/i2c-bcm2835.c | 40 +++++++++++++++++++++++++++++++--------- + 1 file changed, 31 insertions(+), 9 deletions(-) + +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -50,8 +50,6 @@ + #define BCM2835_I2C_S_CLKT BIT(9) + #define BCM2835_I2C_S_LEN BIT(10) /* Fake bit for SW error reporting */ + +-#define BCM2835_I2C_BITMSK_S 0x03FF +- + #define BCM2835_I2C_CDIV_MIN 0x0002 + #define BCM2835_I2C_CDIV_MAX 0xFFFE + +@@ -111,20 +109,26 @@ static void bcm2835_drain_rxfifo(struct + } + } + ++/* ++ * Note about I2C_C_CLEAR on error: ++ * The I2C_C_CLEAR on errors will take some time to resolve -- if you were in ++ * non-idle state and I2C_C_READ, it sets an abort_rx flag and runs through ++ * the state machine to send a NACK and a STOP. Since we're setting CLEAR ++ * without I2CEN, that NACK will be hanging around queued up for next time ++ * we start the engine. ++ */ ++ + static irqreturn_t bcm2835_i2c_isr(int this_irq, void *data) + { + struct bcm2835_i2c_dev *i2c_dev = data; + u32 val, err; + + val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S); +- val &= BCM2835_I2C_BITMSK_S; +- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_S, val); + + err = val & (BCM2835_I2C_S_CLKT | BCM2835_I2C_S_ERR); + if (err) { + i2c_dev->msg_err = err; +- complete(&i2c_dev->completion); +- return IRQ_HANDLED; ++ goto complete; + } + + if (val & BCM2835_I2C_S_DONE) { +@@ -137,21 +141,38 @@ static irqreturn_t bcm2835_i2c_isr(int t + i2c_dev->msg_err = BCM2835_I2C_S_LEN; + else + i2c_dev->msg_err = 0; +- complete(&i2c_dev->completion); +- return IRQ_HANDLED; ++ goto complete; + } + + if (val & BCM2835_I2C_S_TXW) { ++ if (!i2c_dev->msg_buf_remaining) { ++ i2c_dev->msg_err = val | BCM2835_I2C_S_LEN; ++ goto complete; ++ } ++ + bcm2835_fill_txfifo(i2c_dev); + return IRQ_HANDLED; + } + + if (val & BCM2835_I2C_S_RXR) { ++ if (!i2c_dev->msg_buf_remaining) { ++ i2c_dev->msg_err = val | BCM2835_I2C_S_LEN; ++ goto complete; ++ } ++ + bcm2835_drain_rxfifo(i2c_dev); + return IRQ_HANDLED; + } + + return IRQ_NONE; ++ ++complete: ++ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR); ++ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_S, BCM2835_I2C_S_CLKT | ++ BCM2835_I2C_S_ERR | BCM2835_I2C_S_DONE); ++ complete(&i2c_dev->completion); ++ ++ return IRQ_HANDLED; + } + + static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev, +@@ -181,8 +202,9 @@ static int bcm2835_i2c_xfer_msg(struct b + + time_left = wait_for_completion_timeout(&i2c_dev->completion, + BCM2835_I2C_TIMEOUT); +- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR); + if (!time_left) { ++ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, ++ BCM2835_I2C_C_CLEAR); + dev_err(i2c_dev->dev, "i2c transfer timed out\n"); + return -ETIMEDOUT; + } diff --git a/target/linux/brcm2708/patches-4.9/950-0108-i2c-bcm2835-Use-dev_dbg-logging-on-transfer-errors.patch b/target/linux/brcm2708/patches-4.9/950-0108-i2c-bcm2835-Use-dev_dbg-logging-on-transfer-errors.patch new file mode 100644 index 000000000000..acc2ade0a354 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0108-i2c-bcm2835-Use-dev_dbg-logging-on-transfer-errors.patch @@ -0,0 +1,32 @@ +From bff25210b88dc7b71ee9c2626e42a939072dec64 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= +Date: Mon, 19 Sep 2016 17:19:41 +0200 +Subject: [PATCH] i2c: bcm2835: Use dev_dbg logging on transfer errors +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Writing to an AT24C32 generates on average 2x i2c transfer errors per +32-byte page write. Which amounts to a lot for a 4k write. This is due +to the fact that the chip doesn't respond during it's internal write +cycle when the at24 driver tries and retries the next write. +Only a handful drivers use dev_err() on transfer error, so switch to +dev_dbg() instead. + +Signed-off-by: Noralf Trønnes +Reviewed-by: Eric Anholt +--- + drivers/i2c/busses/i2c-bcm2835.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -216,7 +216,7 @@ static int bcm2835_i2c_xfer_msg(struct b + (msg->flags & I2C_M_IGNORE_NAK)) + return 0; + +- dev_err(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err); ++ dev_dbg(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err); + + if (i2c_dev->msg_err & BCM2835_I2C_S_ERR) + return -EREMOTEIO; diff --git a/target/linux/brcm2708/patches-4.9/950-0109-i2c-bcm2835-Can-t-support-I2C_M_IGNORE_NAK.patch b/target/linux/brcm2708/patches-4.9/950-0109-i2c-bcm2835-Can-t-support-I2C_M_IGNORE_NAK.patch new file mode 100644 index 000000000000..a913c50082b2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0109-i2c-bcm2835-Can-t-support-I2C_M_IGNORE_NAK.patch @@ -0,0 +1,44 @@ +From 40c63177d4c0f4755a148503c3b8bb2192ce8c0e Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= +Date: Thu, 22 Sep 2016 22:05:50 +0200 +Subject: [PATCH] i2c: bcm2835: Can't support I2C_M_IGNORE_NAK +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The controller can't support this flag, so remove it. + +Documentation/i2c/i2c-protocol states that all of the message is sent: + +I2C_M_IGNORE_NAK: + Normally message is interrupted immediately if there is [NA] from the + client. Setting this flag treats any [NA] as [A], and all of + message is sent. + +From the BCM2835 ARM Peripherals datasheet: + + The ERR field is set when the slave fails to acknowledge either + its address or a data byte written to it. + +So when the controller doesn't receive an ack, it sets ERR and raises +an interrupt. In other words, the whole message is not sent. + +Signed-off-by: Noralf Trønnes +Reviewed-by: Eric Anholt +--- + drivers/i2c/busses/i2c-bcm2835.c | 4 ---- + 1 file changed, 4 deletions(-) + +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -212,10 +212,6 @@ static int bcm2835_i2c_xfer_msg(struct b + if (likely(!i2c_dev->msg_err)) + return 0; + +- if ((i2c_dev->msg_err & BCM2835_I2C_S_ERR) && +- (msg->flags & I2C_M_IGNORE_NAK)) +- return 0; +- + dev_dbg(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err); + + if (i2c_dev->msg_err & BCM2835_I2C_S_ERR) diff --git a/target/linux/brcm2708/patches-4.9/950-0110-i2c-bcm2835-Add-support-for-Repeated-Start-Condition.patch b/target/linux/brcm2708/patches-4.9/950-0110-i2c-bcm2835-Add-support-for-Repeated-Start-Condition.patch new file mode 100644 index 000000000000..0cd5aa469341 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0110-i2c-bcm2835-Add-support-for-Repeated-Start-Condition.patch @@ -0,0 +1,181 @@ +From db656eb11aebb0d7e4b833f9b452503ddb1351f1 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= +Date: Fri, 23 Sep 2016 04:54:27 +0200 +Subject: [PATCH] i2c: bcm2835: Add support for Repeated Start Condition +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Documentation/i2c/i2c-protocol states that Combined transactions should +separate messages with a Start bit and end the whole transaction with a +Stop bit. This patch adds support for issuing only a Start between +messages instead of a Stop followed by a Start. + +This implementation differs from downstream i2c-bcm2708 in 2 respects: +- it uses an interrupt to detect that the transfer is active instead + of using polling. There is no interrupt for Transfer Active, but by + not prefilling the FIFO it's possible to use the TXW interrupt. +- when resetting/disabling the controller between transfers it writes + CLEAR to the control register instead of just zero. + Using just zero gave many errors. This might be the reason why + downstream had to disable this feature and make it available with a + module parameter. + +I have run thousands of transfers to a DS1307 (rtc), MMA8451 (accel) +and AT24C32 (eeprom) in parallel without problems. + +Signed-off-by: Noralf Trønnes +Acked-by: Eric Anholt +--- + drivers/i2c/busses/i2c-bcm2835.c | 101 ++++++++++++++++++++++++--------------- + 1 file changed, 63 insertions(+), 38 deletions(-) + +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -63,6 +63,7 @@ struct bcm2835_i2c_dev { + struct i2c_adapter adapter; + struct completion completion; + struct i2c_msg *curr_msg; ++ int num_msgs; + u32 msg_err; + u8 *msg_buf; + size_t msg_buf_remaining; +@@ -110,6 +111,45 @@ static void bcm2835_drain_rxfifo(struct + } + + /* ++ * Repeated Start Condition (Sr) ++ * The BCM2835 ARM Peripherals datasheet mentions a way to trigger a Sr when it ++ * talks about reading from a slave with 10 bit address. This is achieved by ++ * issuing a write, poll the I2CS.TA flag and wait for it to be set, and then ++ * issue a read. ++ * A comment in https://github.com/raspberrypi/linux/issues/254 shows how the ++ * firmware actually does it using polling and says that it's a workaround for ++ * a problem in the state machine. ++ * It turns out that it is possible to use the TXW interrupt to know when the ++ * transfer is active, provided the FIFO has not been prefilled. ++ */ ++ ++static void bcm2835_i2c_start_transfer(struct bcm2835_i2c_dev *i2c_dev) ++{ ++ u32 c = BCM2835_I2C_C_ST | BCM2835_I2C_C_I2CEN; ++ struct i2c_msg *msg = i2c_dev->curr_msg; ++ bool last_msg = (i2c_dev->num_msgs == 1); ++ ++ if (!i2c_dev->num_msgs) ++ return; ++ ++ i2c_dev->num_msgs--; ++ i2c_dev->msg_buf = msg->buf; ++ i2c_dev->msg_buf_remaining = msg->len; ++ ++ if (msg->flags & I2C_M_RD) ++ c |= BCM2835_I2C_C_READ | BCM2835_I2C_C_INTR; ++ else ++ c |= BCM2835_I2C_C_INTT; ++ ++ if (last_msg) ++ c |= BCM2835_I2C_C_INTD; ++ ++ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_A, msg->addr); ++ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DLEN, msg->len); ++ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c); ++} ++ ++/* + * Note about I2C_C_CLEAR on error: + * The I2C_C_CLEAR on errors will take some time to resolve -- if you were in + * non-idle state and I2C_C_READ, it sets an abort_rx flag and runs through +@@ -151,6 +191,12 @@ static irqreturn_t bcm2835_i2c_isr(int t + } + + bcm2835_fill_txfifo(i2c_dev); ++ ++ if (i2c_dev->num_msgs && !i2c_dev->msg_buf_remaining) { ++ i2c_dev->curr_msg++; ++ bcm2835_i2c_start_transfer(i2c_dev); ++ } ++ + return IRQ_HANDLED; + } + +@@ -175,30 +221,25 @@ complete: + return IRQ_HANDLED; + } + +-static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev, +- struct i2c_msg *msg) ++static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], ++ int num) + { +- u32 c; ++ struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap); + unsigned long time_left; ++ int i; + +- i2c_dev->curr_msg = msg; +- i2c_dev->msg_buf = msg->buf; +- i2c_dev->msg_buf_remaining = msg->len; +- reinit_completion(&i2c_dev->completion); +- +- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR); ++ for (i = 0; i < (num - 1); i++) ++ if (msgs[i].flags & I2C_M_RD) { ++ dev_warn_once(i2c_dev->dev, ++ "only one read message supported, has to be last\n"); ++ return -EOPNOTSUPP; ++ } + +- if (msg->flags & I2C_M_RD) { +- c = BCM2835_I2C_C_READ | BCM2835_I2C_C_INTR; +- } else { +- c = BCM2835_I2C_C_INTT; +- bcm2835_fill_txfifo(i2c_dev); +- } +- c |= BCM2835_I2C_C_ST | BCM2835_I2C_C_INTD | BCM2835_I2C_C_I2CEN; ++ i2c_dev->curr_msg = msgs; ++ i2c_dev->num_msgs = num; ++ reinit_completion(&i2c_dev->completion); + +- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_A, msg->addr); +- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DLEN, msg->len); +- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c); ++ bcm2835_i2c_start_transfer(i2c_dev); + + time_left = wait_for_completion_timeout(&i2c_dev->completion, + BCM2835_I2C_TIMEOUT); +@@ -209,31 +250,15 @@ static int bcm2835_i2c_xfer_msg(struct b + return -ETIMEDOUT; + } + +- if (likely(!i2c_dev->msg_err)) +- return 0; ++ if (!i2c_dev->msg_err) ++ return num; + + dev_dbg(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err); + + if (i2c_dev->msg_err & BCM2835_I2C_S_ERR) + return -EREMOTEIO; +- else +- return -EIO; +-} +- +-static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], +- int num) +-{ +- struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap); +- int i; +- int ret = 0; +- +- for (i = 0; i < num; i++) { +- ret = bcm2835_i2c_xfer_msg(i2c_dev, &msgs[i]); +- if (ret) +- break; +- } + +- return ret ?: i; ++ return -EIO; + } + + static u32 bcm2835_i2c_func(struct i2c_adapter *adap) diff --git a/target/linux/brcm2708/patches-4.9/950-0111-i2c-bcm2835-Support-i2c-dev-ioctl-I2C_TIMEOUT.patch b/target/linux/brcm2708/patches-4.9/950-0111-i2c-bcm2835-Support-i2c-dev-ioctl-I2C_TIMEOUT.patch new file mode 100644 index 000000000000..07016d978220 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0111-i2c-bcm2835-Support-i2c-dev-ioctl-I2C_TIMEOUT.patch @@ -0,0 +1,37 @@ +From 0c2744e901150b27a60bded1acb058ce26709d5a Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= +Date: Fri, 23 Sep 2016 04:57:17 +0200 +Subject: [PATCH] i2c: bcm2835: Support i2c-dev ioctl I2C_TIMEOUT +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Use i2c_adapter->timeout for the completion timeout value. The core +default is 1 second. + +Signed-off-by: Noralf Trønnes +Reviewed-by: Eric Anholt +--- + drivers/i2c/busses/i2c-bcm2835.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -53,8 +53,6 @@ + #define BCM2835_I2C_CDIV_MIN 0x0002 + #define BCM2835_I2C_CDIV_MAX 0xFFFE + +-#define BCM2835_I2C_TIMEOUT (msecs_to_jiffies(1000)) +- + struct bcm2835_i2c_dev { + struct device *dev; + void __iomem *regs; +@@ -242,7 +240,7 @@ static int bcm2835_i2c_xfer(struct i2c_a + bcm2835_i2c_start_transfer(i2c_dev); + + time_left = wait_for_completion_timeout(&i2c_dev->completion, +- BCM2835_I2C_TIMEOUT); ++ adap->timeout); + if (!time_left) { + bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, + BCM2835_I2C_C_CLEAR); diff --git a/target/linux/brcm2708/patches-4.9/950-0112-i2c-bcm2835-Add-support-for-dynamic-clock.patch b/target/linux/brcm2708/patches-4.9/950-0112-i2c-bcm2835-Add-support-for-dynamic-clock.patch new file mode 100644 index 000000000000..afe2b2297c64 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0112-i2c-bcm2835-Add-support-for-dynamic-clock.patch @@ -0,0 +1,117 @@ +From ce8663f1f101f8c7b9037c31269b0b31373737ad Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= +Date: Tue, 27 Sep 2016 01:00:08 +0200 +Subject: [PATCH] i2c: bcm2835: Add support for dynamic clock +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Support a dynamic clock by reading the frequency and setting the +divisor in the transfer function instead of during probe. + +Signed-off-by: Noralf Trønnes +Reviewed-by: Martin Sperl +--- + drivers/i2c/busses/i2c-bcm2835.c | 51 +++++++++++++++++++++++++--------------- + 1 file changed, 32 insertions(+), 19 deletions(-) + +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -58,6 +58,7 @@ struct bcm2835_i2c_dev { + void __iomem *regs; + struct clk *clk; + int irq; ++ u32 bus_clk_rate; + struct i2c_adapter adapter; + struct completion completion; + struct i2c_msg *curr_msg; +@@ -78,6 +79,30 @@ static inline u32 bcm2835_i2c_readl(stru + return readl(i2c_dev->regs + reg); + } + ++static int bcm2835_i2c_set_divider(struct bcm2835_i2c_dev *i2c_dev) ++{ ++ u32 divider; ++ ++ divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk), ++ i2c_dev->bus_clk_rate); ++ /* ++ * Per the datasheet, the register is always interpreted as an even ++ * number, by rounding down. In other words, the LSB is ignored. So, ++ * if the LSB is set, increment the divider to avoid any issue. ++ */ ++ if (divider & 1) ++ divider++; ++ if ((divider < BCM2835_I2C_CDIV_MIN) || ++ (divider > BCM2835_I2C_CDIV_MAX)) { ++ dev_err_ratelimited(i2c_dev->dev, "Invalid clock-frequency\n"); ++ return -EINVAL; ++ } ++ ++ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider); ++ ++ return 0; ++} ++ + static void bcm2835_fill_txfifo(struct bcm2835_i2c_dev *i2c_dev) + { + u32 val; +@@ -224,7 +249,7 @@ static int bcm2835_i2c_xfer(struct i2c_a + { + struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap); + unsigned long time_left; +- int i; ++ int i, ret; + + for (i = 0; i < (num - 1); i++) + if (msgs[i].flags & I2C_M_RD) { +@@ -233,6 +258,10 @@ static int bcm2835_i2c_xfer(struct i2c_a + return -EOPNOTSUPP; + } + ++ ret = bcm2835_i2c_set_divider(i2c_dev); ++ if (ret) ++ return ret; ++ + i2c_dev->curr_msg = msgs; + i2c_dev->num_msgs = num; + reinit_completion(&i2c_dev->completion); +@@ -282,7 +311,6 @@ static int bcm2835_i2c_probe(struct plat + { + struct bcm2835_i2c_dev *i2c_dev; + struct resource *mem, *irq; +- u32 bus_clk_rate, divider; + int ret; + struct i2c_adapter *adap; + +@@ -306,28 +334,13 @@ static int bcm2835_i2c_probe(struct plat + } + + ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", +- &bus_clk_rate); ++ &i2c_dev->bus_clk_rate); + if (ret < 0) { + dev_warn(&pdev->dev, + "Could not read clock-frequency property\n"); +- bus_clk_rate = 100000; ++ i2c_dev->bus_clk_rate = 100000; + } + +- divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk), bus_clk_rate); +- /* +- * Per the datasheet, the register is always interpreted as an even +- * number, by rounding down. In other words, the LSB is ignored. So, +- * if the LSB is set, increment the divider to avoid any issue. +- */ +- if (divider & 1) +- divider++; +- if ((divider < BCM2835_I2C_CDIV_MIN) || +- (divider > BCM2835_I2C_CDIV_MAX)) { +- dev_err(&pdev->dev, "Invalid clock-frequency\n"); +- return -ENODEV; +- } +- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider); +- + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!irq) { + dev_err(&pdev->dev, "No IRQ resource\n"); diff --git a/target/linux/brcm2708/patches-4.9/950-0113-i2c-bcm2835-Add-debug-support.patch b/target/linux/brcm2708/patches-4.9/950-0113-i2c-bcm2835-Add-debug-support.patch new file mode 100644 index 000000000000..f69a48f623c9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0113-i2c-bcm2835-Add-debug-support.patch @@ -0,0 +1,189 @@ +From 98629f09f3ceb7f2a559b48b4a70028485583f5e Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= +Date: Tue, 1 Nov 2016 15:15:41 +0100 +Subject: [PATCH] i2c: bcm2835: Add debug support +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This adds a debug module parameter to aid in debugging transfer issues +by printing info to the kernel log. When enabled, status values are +collected in the interrupt routine and msg info in +bcm2835_i2c_start_transfer(). This is done in a way that tries to avoid +affecting timing. Having printk in the isr can mask issues. + +debug values (additive): +1: Print info on error +2: Print info on all transfers +3: Print messages before transfer is started + +The value can be changed at runtime: +/sys/module/i2c_bcm2835/parameters/debug + +Example output, debug=3: +[ 747.114448] bcm2835_i2c_xfer: msg(1/2) write addr=0x54, len=2 flags= [i2c1] +[ 747.114463] bcm2835_i2c_xfer: msg(2/2) read addr=0x54, len=32 flags= [i2c1] +[ 747.117809] start_transfer: msg(1/2) write addr=0x54, len=2 flags= [i2c1] +[ 747.117825] isr: remain=2, status=0x30000055 : TA TXW TXD TXE [i2c1] +[ 747.117839] start_transfer: msg(2/2) read addr=0x54, len=32 flags= [i2c1] +[ 747.117849] isr: remain=32, status=0xd0000039 : TA RXR TXD RXD [i2c1] +[ 747.117861] isr: remain=20, status=0xd0000039 : TA RXR TXD RXD [i2c1] +[ 747.117870] isr: remain=8, status=0x32 : DONE TXD RXD [i2c1] + +Signed-off-by: Noralf Trønnes +--- + drivers/i2c/busses/i2c-bcm2835.c | 99 +++++++++++++++++++++++++++++++++++++++- + 1 file changed, 98 insertions(+), 1 deletion(-) + +--- a/drivers/i2c/busses/i2c-bcm2835.c ++++ b/drivers/i2c/busses/i2c-bcm2835.c +@@ -53,6 +53,18 @@ + #define BCM2835_I2C_CDIV_MIN 0x0002 + #define BCM2835_I2C_CDIV_MAX 0xFFFE + ++static unsigned int debug; ++module_param(debug, uint, 0644); ++MODULE_PARM_DESC(debug, "1=err, 2=isr, 3=xfer"); ++ ++#define BCM2835_DEBUG_MAX 512 ++struct bcm2835_debug { ++ struct i2c_msg *msg; ++ int msg_idx; ++ size_t remain; ++ u32 status; ++}; ++ + struct bcm2835_i2c_dev { + struct device *dev; + void __iomem *regs; +@@ -66,8 +78,78 @@ struct bcm2835_i2c_dev { + u32 msg_err; + u8 *msg_buf; + size_t msg_buf_remaining; ++ struct bcm2835_debug debug[BCM2835_DEBUG_MAX]; ++ unsigned int debug_num; ++ unsigned int debug_num_msgs; + }; + ++static inline void bcm2835_debug_add(struct bcm2835_i2c_dev *i2c_dev, u32 s) ++{ ++ if (!i2c_dev->debug_num_msgs || i2c_dev->debug_num >= BCM2835_DEBUG_MAX) ++ return; ++ ++ i2c_dev->debug[i2c_dev->debug_num].msg = i2c_dev->curr_msg; ++ i2c_dev->debug[i2c_dev->debug_num].msg_idx = ++ i2c_dev->debug_num_msgs - i2c_dev->num_msgs; ++ i2c_dev->debug[i2c_dev->debug_num].remain = i2c_dev->msg_buf_remaining; ++ i2c_dev->debug[i2c_dev->debug_num].status = s; ++ i2c_dev->debug_num++; ++} ++ ++static void bcm2835_debug_print_status(struct bcm2835_i2c_dev *i2c_dev, ++ struct bcm2835_debug *d) ++{ ++ u32 s = d->status; ++ ++ pr_info("isr: remain=%zu, status=0x%x : %s%s%s%s%s%s%s%s%s%s [i2c%d]\n", ++ d->remain, s, ++ s & BCM2835_I2C_S_TA ? "TA " : "", ++ s & BCM2835_I2C_S_DONE ? "DONE " : "", ++ s & BCM2835_I2C_S_TXW ? "TXW " : "", ++ s & BCM2835_I2C_S_RXR ? "RXR " : "", ++ s & BCM2835_I2C_S_TXD ? "TXD " : "", ++ s & BCM2835_I2C_S_RXD ? "RXD " : "", ++ s & BCM2835_I2C_S_TXE ? "TXE " : "", ++ s & BCM2835_I2C_S_RXF ? "RXF " : "", ++ s & BCM2835_I2C_S_ERR ? "ERR " : "", ++ s & BCM2835_I2C_S_CLKT ? "CLKT " : "", ++ i2c_dev->adapter.nr); ++} ++ ++static void bcm2835_debug_print_msg(struct bcm2835_i2c_dev *i2c_dev, ++ struct i2c_msg *msg, int i, int total, ++ const char *fname) ++{ ++ pr_info("%s: msg(%d/%d) %s addr=0x%02x, len=%u flags=%s%s%s%s%s%s%s [i2c%d]\n", ++ fname, i, total, ++ msg->flags & I2C_M_RD ? "read" : "write", msg->addr, msg->len, ++ msg->flags & I2C_M_TEN ? "TEN" : "", ++ msg->flags & I2C_M_RECV_LEN ? "RECV_LEN" : "", ++ msg->flags & I2C_M_NO_RD_ACK ? "NO_RD_ACK" : "", ++ msg->flags & I2C_M_IGNORE_NAK ? "IGNORE_NAK" : "", ++ msg->flags & I2C_M_REV_DIR_ADDR ? "REV_DIR_ADDR" : "", ++ msg->flags & I2C_M_NOSTART ? "NOSTART" : "", ++ msg->flags & I2C_M_STOP ? "STOP" : "", ++ i2c_dev->adapter.nr); ++} ++ ++static void bcm2835_debug_print(struct bcm2835_i2c_dev *i2c_dev) ++{ ++ struct bcm2835_debug *d; ++ unsigned int i; ++ ++ for (i = 0; i < i2c_dev->debug_num; i++) { ++ d = &i2c_dev->debug[i]; ++ if (d->status == ~0) ++ bcm2835_debug_print_msg(i2c_dev, d->msg, d->msg_idx, ++ i2c_dev->debug_num_msgs, "start_transfer"); ++ else ++ bcm2835_debug_print_status(i2c_dev, d); ++ } ++ if (i2c_dev->debug_num >= BCM2835_DEBUG_MAX) ++ pr_info("BCM2835_DEBUG_MAX reached\n"); ++} ++ + static inline void bcm2835_i2c_writel(struct bcm2835_i2c_dev *i2c_dev, + u32 reg, u32 val) + { +@@ -170,6 +252,7 @@ static void bcm2835_i2c_start_transfer(s + bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_A, msg->addr); + bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DLEN, msg->len); + bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c); ++ bcm2835_debug_add(i2c_dev, ~0); + } + + /* +@@ -187,6 +270,7 @@ static irqreturn_t bcm2835_i2c_isr(int t + u32 val, err; + + val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S); ++ bcm2835_debug_add(i2c_dev, val); + + err = val & (BCM2835_I2C_S_CLKT | BCM2835_I2C_S_ERR); + if (err) { +@@ -251,6 +335,13 @@ static int bcm2835_i2c_xfer(struct i2c_a + unsigned long time_left; + int i, ret; + ++ if (debug) ++ i2c_dev->debug_num_msgs = num; ++ ++ if (debug > 2) ++ for (i = 0; i < num; i++) ++ bcm2835_debug_print_msg(i2c_dev, &msgs[i], i + 1, num, __func__); ++ + for (i = 0; i < (num - 1); i++) + if (msgs[i].flags & I2C_M_RD) { + dev_warn_once(i2c_dev->dev, +@@ -270,6 +361,10 @@ static int bcm2835_i2c_xfer(struct i2c_a + + time_left = wait_for_completion_timeout(&i2c_dev->completion, + adap->timeout); ++ if (debug > 1 || (debug && (!time_left || i2c_dev->msg_err))) ++ bcm2835_debug_print(i2c_dev); ++ i2c_dev->debug_num_msgs = 0; ++ i2c_dev->debug_num = 0; + if (!time_left) { + bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, + BCM2835_I2C_C_CLEAR); +@@ -280,7 +375,9 @@ static int bcm2835_i2c_xfer(struct i2c_a + if (!i2c_dev->msg_err) + return num; + +- dev_dbg(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err); ++ if (debug) ++ dev_err(i2c_dev->dev, "i2c transfer failed: %x\n", ++ i2c_dev->msg_err); + + if (i2c_dev->msg_err & BCM2835_I2C_S_ERR) + return -EREMOTEIO; diff --git a/target/linux/brcm2708/patches-4.9/950-0114-arm64-Add-CONFIG_ARCH_BCM2835.patch b/target/linux/brcm2708/patches-4.9/950-0114-arm64-Add-CONFIG_ARCH_BCM2835.patch new file mode 100644 index 000000000000..34ab47e7b47f --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0114-arm64-Add-CONFIG_ARCH_BCM2835.patch @@ -0,0 +1,16 @@ +From c3dc479ae9620756f981ad2c5afeee92295f8ea3 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Sat, 31 Dec 2016 14:15:50 +0000 +Subject: [PATCH] arm64: Add CONFIG_ARCH_BCM2835 + +--- + arch/arm64/configs/bcmrpi3_defconfig | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm64/configs/bcmrpi3_defconfig ++++ b/arch/arm64/configs/bcmrpi3_defconfig +@@ -1332,3 +1332,4 @@ CONFIG_ARM64_CRYPTO=y + CONFIG_CRC_ITU_T=y + CONFIG_LIBCRC32C=y + CONFIG_BCM2708_VCHIQ=n ++CONFIG_ARCH_BCM2835=y diff --git a/target/linux/brcm2708/patches-4.9/950-0115-Add-support-for-Silicon-Labs-Si7013-20-21-humidity-t.patch b/target/linux/brcm2708/patches-4.9/950-0115-Add-support-for-Silicon-Labs-Si7013-20-21-humidity-t.patch new file mode 100644 index 000000000000..119b05426098 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0115-Add-support-for-Silicon-Labs-Si7013-20-21-humidity-t.patch @@ -0,0 +1,77 @@ +From 69d0de7d07ec016f2956237ec141bb62ff7ae36c Mon Sep 17 00:00:00 2001 +From: Alex Tucker +Date: Tue, 13 Dec 2016 19:50:18 +0000 +Subject: [PATCH] Add support for Silicon Labs Si7013/20/21 + humidity/temperature sensor. + +--- + arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts | 49 +++++++++++++---------- + 1 file changed, 28 insertions(+), 21 deletions(-) + +--- a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts +@@ -1,34 +1,41 @@ +-// Definitions for a few digital barometric pressure and temperature sensors ++// Definitions for I2C based sensors using the Industrial IO interface. + /dts-v1/; + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2708"; + +- fragment@0 { +- target = <&i2c_arm>; +- __overlay__ { +- #address-cells = <1>; +- #size-cells = <0>; +- status = "okay"; +- +- bmp085: bmp085@77 { +- compatible = "bosch,bmp085"; +- reg = <0x77>; +- default-oversampling = <3>; +- status = "disable"; +- }; +- +- bmp280: bmp280@76 { +- compatible = "bosch,bmp280"; +- reg = <0x76>; +- status = "disable"; +- }; +- }; +- }; ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ bmp085: bmp085@77 { ++ compatible = "bosch,bmp085"; ++ reg = <0x77>; ++ default-oversampling = <3>; ++ status = "disable"; ++ }; ++ ++ bmp280: bmp280@76 { ++ compatible = "bosch,bmp280"; ++ reg = <0x76>; ++ status = "disable"; ++ }; ++ ++ si7020: si7020@40 { ++ compatible = "si7020"; ++ reg = <0x40>; ++ status = "disable"; ++ }; ++ }; ++ }; + + __overrides__ { + bmp085 = <&bmp085>,"status"; + bmp280 = <&bmp280>,"status"; ++ si7020 = <&si7020>,"status"; + }; + }; diff --git a/target/linux/brcm2708/patches-4.9/950-0116-Document-the-si7020-option.patch b/target/linux/brcm2708/patches-4.9/950-0116-Document-the-si7020-option.patch new file mode 100644 index 000000000000..0319ca43a272 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0116-Document-the-si7020-option.patch @@ -0,0 +1,21 @@ +From ed753b7389b8c65af0b4266c001ef0343fb1c30e Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 3 Jan 2017 21:27:46 +0000 +Subject: [PATCH] Document the si7020 option + +--- + arch/arm/boot/dts/overlays/README | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -549,6 +549,9 @@ Params: bmp085 Select t + + bmp280 Select the Bosch sensortronic BMP280 + ++ si7020 Select the Silicon Labs Si7013/20/21 humidity/ ++ temperature sensor ++ + + Name: i2c0-bcm2708 + Info: Enable the i2c_bcm2708 driver for the i2c0 bus. Not all pin combinations diff --git a/target/linux/brcm2708/patches-4.9/950-0117-pisound-improvements.patch b/target/linux/brcm2708/patches-4.9/950-0117-pisound-improvements.patch new file mode 100644 index 000000000000..f914bfc3ade9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0117-pisound-improvements.patch @@ -0,0 +1,294 @@ +From 8ed8e29b19dba95a7a6c2364c2bb32d926601713 Mon Sep 17 00:00:00 2001 +From: Giedrius Trainavicius +Date: Thu, 5 Jan 2017 02:38:16 +0200 +Subject: [PATCH] pisound improvements: + +* Added a writable sysfs object to enable scripts / user space software +to blink MIDI activity LEDs for variable duration. +* Improved hw_param constraints setting. +* Added compatibility with S16_LE sample format. +* Exposed some simple placeholder volume controls, so the card appears +in volumealsa widget. + +Signed-off-by: Giedrius Trainavicius +--- + sound/soc/bcm/pisound.c | 175 ++++++++++++++++++++++++++++++++++++++++++------ + 1 file changed, 154 insertions(+), 21 deletions(-) + +--- a/sound/soc/bcm/pisound.c ++++ b/sound/soc/bcm/pisound.c +@@ -36,6 +36,7 @@ + #include + #include + #include ++#include + + static int pisnd_spi_init(struct device *dev); + static void pisnd_spi_uninit(void); +@@ -214,6 +215,9 @@ static char g_serial_num[11]; + static char g_id[25]; + static char g_version[5]; + ++static uint8_t g_ledFlashDuration; ++static bool g_ledFlashDurationChanged; ++ + DEFINE_KFIFO(spi_fifo_in, uint8_t, FIFO_SIZE); + DEFINE_KFIFO(spi_fifo_out, uint8_t, FIFO_SIZE); + +@@ -396,8 +400,13 @@ static void pisnd_work_handler(struct wo + val = 0; + tx = 0; + +- if (kfifo_get(&spi_fifo_out, &val)) ++ if (g_ledFlashDurationChanged) { ++ tx = 0xf000 | g_ledFlashDuration; ++ g_ledFlashDuration = 0; ++ g_ledFlashDurationChanged = false; ++ } else if (kfifo_get(&spi_fifo_out, &val)) { + tx = 0x0f00 | val; ++ } + + rx = spi_transfer16(tx); + +@@ -410,6 +419,7 @@ static void pisnd_work_handler(struct wo + } while (rx != 0 + || !kfifo_is_empty(&spi_fifo_out) + || pisnd_spi_has_more() ++ || g_ledFlashDurationChanged + ); + + if (!kfifo_is_empty(&spi_fifo_in) && g_recvCallback) +@@ -569,7 +579,7 @@ static int pisnd_spi_init(struct device + } + + /* Flash the LEDs. */ +- spi_transfer16(0xf000); ++ spi_transfer16(0xf008); + + ret = pisnd_spi_gpio_irq_init(dev); + if (ret < 0) { +@@ -610,6 +620,14 @@ static void pisnd_spi_uninit(void) + pisnd_spi_gpio_uninit(); + } + ++static void pisnd_spi_flash_leds(uint8_t duration) ++{ ++ g_ledFlashDuration = duration; ++ g_ledFlashDurationChanged = true; ++ printd("schedule from spi_flash_leds\n"); ++ pisnd_schedule_process(TASK_PROCESS); ++} ++ + static void pisnd_spi_send(uint8_t val) + { + kfifo_put(&spi_fifo_out, val); +@@ -658,6 +676,83 @@ static const struct of_device_id pisound + {}, + }; + ++enum { ++ SWITCH = 0, ++ VOLUME = 1, ++}; ++ ++static int pisnd_ctl_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ if (kcontrol->private_value == SWITCH) { ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = 1; ++ return 0; ++ } else if (kcontrol->private_value == VOLUME) { ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = 100; ++ return 0; ++ } ++ return -EINVAL; ++} ++ ++static int pisnd_ctl_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ if (kcontrol->private_value == SWITCH) { ++ ucontrol->value.integer.value[0] = 1; ++ return 0; ++ } else if (kcontrol->private_value == VOLUME) { ++ ucontrol->value.integer.value[0] = 100; ++ return 0; ++ } ++ ++ return -EINVAL; ++} ++ ++static struct snd_kcontrol_new pisnd_ctl[] = { ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "PCM Playback Switch", ++ .index = 0, ++ .private_value = SWITCH, ++ .access = SNDRV_CTL_ELEM_ACCESS_READ, ++ .info = pisnd_ctl_info, ++ .get = pisnd_ctl_get, ++ }, ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "PCM Playback Volume", ++ .index = 0, ++ .private_value = VOLUME, ++ .access = SNDRV_CTL_ELEM_ACCESS_READ, ++ .info = pisnd_ctl_info, ++ .get = pisnd_ctl_get, ++ }, ++}; ++ ++static int pisnd_ctl_init(struct snd_card *card) ++{ ++ int err, i; ++ ++ for (i = 0; i < ARRAY_SIZE(pisnd_ctl); ++i) { ++ err = snd_ctl_add(card, snd_ctl_new1(&pisnd_ctl[i], NULL)); ++ if (err < 0) ++ return err; ++ } ++ ++ return 0; ++} ++ ++static int pisnd_ctl_uninit(void) ++{ ++ return 0; ++} ++ + static struct gpio_desc *osr0, *osr1, *osr2; + static struct gpio_desc *reset; + static struct gpio_desc *button; +@@ -667,6 +762,14 @@ static int pisnd_hw_params( + struct snd_pcm_hw_params *params + ) + { ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ /* pisound runs on fixed 32 clock counts per channel, ++ * as generated by the master ADC. ++ */ ++ snd_soc_dai_set_bclk_ratio(cpu_dai, 32*2); ++ + printd("rate = %d\n", params_rate(params)); + printd("ch = %d\n", params_channels(params)); + printd("bits = %u\n", +@@ -711,16 +814,6 @@ static struct snd_pcm_hw_constraint_list + .mask = 0, + }; + +-static unsigned int sample_bits[] = { +- 24, 32 +-}; +- +-static struct snd_pcm_hw_constraint_list constraints_sample_bits = { +- .count = ARRAY_SIZE(sample_bits), +- .list = sample_bits, +- .mask = 0, +-}; +- + static int pisnd_startup(struct snd_pcm_substream *substream) + { + int err = snd_pcm_hw_constraint_list( +@@ -733,11 +826,21 @@ static int pisnd_startup(struct snd_pcm_ + if (err < 0) + return err; + +- err = snd_pcm_hw_constraint_list( ++ err = snd_pcm_hw_constraint_single( + substream->runtime, +- 0, +- SNDRV_PCM_HW_PARAM_SAMPLE_BITS, +- &constraints_sample_bits ++ SNDRV_PCM_HW_PARAM_CHANNELS, ++ 2 ++ ); ++ ++ if (err < 0) ++ return err; ++ ++ err = snd_pcm_hw_constraint_mask64( ++ substream->runtime, ++ SNDRV_PCM_HW_PARAM_FORMAT, ++ SNDRV_PCM_FMTBIT_S16_LE | ++ SNDRV_PCM_FMTBIT_S24_LE | ++ SNDRV_PCM_FMTBIT_S32_LE + ); + + if (err < 0) +@@ -771,14 +874,23 @@ static int pisnd_card_probe(struct snd_s + { + int err = pisnd_midi_init(card->snd_card); + +- if (err < 0) ++ if (err < 0) { + printe("pisnd_midi_init failed: %d\n", err); ++ return err; ++ } + +- return err; ++ err = pisnd_ctl_init(card->snd_card); ++ if (err < 0) { ++ printe("pisnd_ctl_init failed: %d\n", err); ++ return err; ++ } ++ ++ return 0; + } + + static int pisnd_card_remove(struct snd_soc_card *card) + { ++ pisnd_ctl_uninit(); + pisnd_midi_uninit(); + return 0; + } +@@ -870,17 +982,38 @@ static ssize_t pisnd_version_show( + return sprintf(buf, "%s\n", pisnd_spi_get_version()); + } + ++static ssize_t pisnd_led_store( ++ struct kobject *kobj, ++ struct kobj_attribute *attr, ++ const char *buf, ++ size_t length ++ ) ++{ ++ uint32_t timeout; ++ int err; ++ ++ err = kstrtou32(buf, 10, &timeout); ++ ++ if (err == 0 && timeout <= 255) ++ pisnd_spi_flash_leds(timeout); ++ ++ return length; ++} ++ + static struct kobj_attribute pisnd_serial_attribute = +- __ATTR(serial, 0644, pisnd_serial_show, NULL); ++ __ATTR(serial, 0444, pisnd_serial_show, NULL); + static struct kobj_attribute pisnd_id_attribute = +- __ATTR(id, 0644, pisnd_id_show, NULL); ++ __ATTR(id, 0444, pisnd_id_show, NULL); + static struct kobj_attribute pisnd_version_attribute = +- __ATTR(version, 0644, pisnd_version_show, NULL); ++ __ATTR(version, 0444, pisnd_version_show, NULL); ++static struct kobj_attribute pisnd_led_attribute = ++ __ATTR(led, 0644, NULL, pisnd_led_store); + + static struct attribute *attrs[] = { + &pisnd_serial_attribute.attr, + &pisnd_id_attribute.attr, + &pisnd_version_attribute.attr, ++ &pisnd_led_attribute.attr, + NULL + }; + diff --git a/target/linux/brcm2708/patches-4.9/950-0118-Add-driver_name-property.patch b/target/linux/brcm2708/patches-4.9/950-0118-Add-driver_name-property.patch new file mode 100644 index 000000000000..bfda58aa5a9e --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0118-Add-driver_name-property.patch @@ -0,0 +1,20 @@ +From 341bc67d361def1f23a96c512ab6bc39f32b3601 Mon Sep 17 00:00:00 2001 +From: Aaron Shaw +Date: Tue, 10 Jan 2017 16:05:41 +0000 +Subject: [PATCH] Add driver_name property + +Add driver name property for use with 5.1 passthrough audio in LibreElec and other Kodi based OSs +--- + sound/soc/bcm/justboom-dac.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/sound/soc/bcm/justboom-dac.c ++++ b/sound/soc/bcm/justboom-dac.c +@@ -98,6 +98,7 @@ static struct snd_soc_dai_link snd_rpi_j + /* audio machine driver */ + static struct snd_soc_card snd_rpi_justboom_dac = { + .name = "snd_rpi_justboom_dac", ++ .driver_name = "JustBoomDac", + .owner = THIS_MODULE, + .dai_link = snd_rpi_justboom_dac_dai, + .num_links = ARRAY_SIZE(snd_rpi_justboom_dac_dai), diff --git a/target/linux/brcm2708/patches-4.9/950-0119-Add-driver_name-paramater.patch b/target/linux/brcm2708/patches-4.9/950-0119-Add-driver_name-paramater.patch new file mode 100644 index 000000000000..2a3a6d80612b --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0119-Add-driver_name-paramater.patch @@ -0,0 +1,20 @@ +From d87b665c7e4c09bf713ef6f45ceb11a8aacbcf5e Mon Sep 17 00:00:00 2001 +From: Aaron Shaw +Date: Tue, 10 Jan 2017 16:11:04 +0000 +Subject: [PATCH] Add driver_name paramater + +Add driver_name parameter for use with 5.1 passthrough audio in LibreElec and other Kodi OSs +--- + sound/soc/bcm/justboom-digi.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/sound/soc/bcm/justboom-digi.c ++++ b/sound/soc/bcm/justboom-digi.c +@@ -154,6 +154,7 @@ static struct snd_soc_dai_link snd_rpi_j + /* audio machine driver */ + static struct snd_soc_card snd_rpi_justboom_digi = { + .name = "snd_rpi_justboom_digi", ++ .driver_name = "JustBoomDigi", + .owner = THIS_MODULE, + .dai_link = snd_rpi_justboom_digi_dai, + .num_links = ARRAY_SIZE(snd_rpi_justboom_digi_dai), diff --git a/target/linux/brcm2708/patches-4.9/950-0120-BCM270X_DT-Add-pi3-disable-wifi-overlay.patch b/target/linux/brcm2708/patches-4.9/950-0120-BCM270X_DT-Add-pi3-disable-wifi-overlay.patch new file mode 100644 index 000000000000..4bc80bef0475 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0120-BCM270X_DT-Add-pi3-disable-wifi-overlay.patch @@ -0,0 +1,56 @@ +From b76839857c9b553f52f8d14cf54a22579b362db9 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 11 Jan 2017 13:01:21 +0000 +Subject: [PATCH] BCM270X_DT: Add pi3-disable-wifi overlay + +pi3-disable-wifi is a minimal overlay to disable the onboard WiFi. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 6 ++++++ + arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts | 13 +++++++++++++ + 3 files changed, 20 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -51,6 +51,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + mz61581.dtbo \ + pi3-act-led.dtbo \ + pi3-disable-bt.dtbo \ ++ pi3-disable-wifi.dtbo \ + pi3-miniuart-bt.dtbo \ + piscreen.dtbo \ + piscreen2r.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -800,6 +800,12 @@ Load: dtoverlay=pi3-disable-bt + Params: + + ++Name: pi3-disable-wifi ++Info: Disable Pi3 onboard WiFi ++Load: dtoverlay=pi3-disable-wifi ++Params: ++ ++ + Name: pi3-miniuart-bt + Info: Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore + UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts +@@ -0,0 +1,13 @@ ++/dts-v1/; ++/plugin/; ++ ++/{ ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&mmc>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.9/950-0121-ARM64-Make-it-work-again-on-4.9-1790.patch b/target/linux/brcm2708/patches-4.9/950-0121-ARM64-Make-it-work-again-on-4.9-1790.patch new file mode 100644 index 000000000000..96b298dd1be0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0121-ARM64-Make-it-work-again-on-4.9-1790.patch @@ -0,0 +1,410 @@ +From fe3c34c6196cfc708a515e44dd432da0e6cc0aba Mon Sep 17 00:00:00 2001 +From: Electron752 +Date: Thu, 12 Jan 2017 07:07:08 -0800 +Subject: [PATCH] ARM64: Make it work again on 4.9 (#1790) + +* Invoke the dtc compiler with the same options used in arm mode. +* ARM64 now uses the bcm2835 platform just like ARM32. +* ARM64: Update bcmrpi3_defconfig + +Signed-off-by: Michael Zoran +--- + arch/arm64/Kconfig.platforms | 22 ------ + arch/arm64/boot/dts/broadcom/Makefile | 10 ++- + arch/arm64/boot/dts/overlays | 1 + + arch/arm64/configs/bcmrpi3_defconfig | 126 ++++++++++------------------------ + 4 files changed, 48 insertions(+), 111 deletions(-) + create mode 120000 arch/arm64/boot/dts/overlays + +diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms +index 7d213c2c..101794f 100644 +--- a/arch/arm64/Kconfig.platforms ++++ b/arch/arm64/Kconfig.platforms +@@ -1,27 +1,5 @@ + menu "Platform selection" + +-config MACH_BCM2709 +- bool +- +-config ARCH_BCM2709 +- bool "Broadcom BCM2709 family" +- select MACH_BCM2709 +- select HAVE_SMP +- select ARM_AMBA +- select COMMON_CLK +- select ARCH_HAS_CPUFREQ +- select GENERIC_CLOCKEVENTS +- select MULTI_IRQ_HANDLER +- select SPARSE_IRQ +- select MFD_SYSCON +- select VC4 +- select USE_OF +- select ARCH_REQUIRE_GPIOLIB +- select PINCTRL +- select PINCTRL_BCM2835 +- help +- This enables support for Broadcom BCM2709 boards. +- + config ARCH_SUNXI + bool "Allwinner sunxi 64-bit SoC Family" + select GENERIC_IRQ_CHIP +diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile +index 2152448..7aa03be 100644 +--- a/arch/arm64/boot/dts/broadcom/Makefile ++++ b/arch/arm64/boot/dts/broadcom/Makefile +@@ -1,7 +1,15 @@ ++# Enable fixups to support overlays on BCM2835 platforms ++ ++ifeq ($(CONFIG_ARCH_BCM2835),y) ++DTC_FLAGS ?= -@ -H epapr ++endif ++ + dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb + dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb + dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb +-dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb ++dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb ++ ++dts-dirs += ../overlays + + always := $(dtb-y) + subdir-y := $(dts-dirs) +diff --git a/arch/arm64/boot/dts/overlays b/arch/arm64/boot/dts/overlays +new file mode 120000 +index 0000000..ded0864 +--- /dev/null ++++ b/arch/arm64/boot/dts/overlays +@@ -0,0 +1 @@ ++../../../arm/boot/dts/overlays +\ No newline at end of file +diff --git a/arch/arm64/configs/bcmrpi3_defconfig b/arch/arm64/configs/bcmrpi3_defconfig +index 53da5c7..c7e891d 100644 +--- a/arch/arm64/configs/bcmrpi3_defconfig ++++ b/arch/arm64/configs/bcmrpi3_defconfig +@@ -1,52 +1,9 @@ +-# CONFIG_ARM_PATCH_PHYS_VIRT is not set +-CONFIG_PHYS_OFFSET=0 + CONFIG_LOCALVERSION="-v8" + # CONFIG_LOCALVERSION_AUTO is not set +-CONFIG_64BIT=y + CONFIG_SYSVIPC=y + CONFIG_POSIX_MQUEUE=y + CONFIG_NO_HZ=y + CONFIG_HIGH_RES_TIMERS=y +- +-# +-# ARM errata workarounds via the alternatives framework +-# +-CONFIG_ARM64_ERRATUM_826319=n +-CONFIG_ARM64_ERRATUM_827319=n +-CONFIG_ARM64_ERRATUM_824069=n +-CONFIG_ARM64_ERRATUM_819472=n +-CONFIG_ARM64_ERRATUM_832075=n +-CONFIG_ARM64_ERRATUM_845719=n +-CONFIG_ARM64_ERRATUM_843419=n +-CONFIG_CAVIUM_ERRATUM_22375=n +-CONFIG_CAVIUM_ERRATUM_23154=n +-CONFIG_CAVIUM_ERRATUM_27456=n +-CONFIG_ARM64_4K_PAGES=y +-CONFIG_ARM64_VA_BITS_39=y +-CONFIG_ARM64_VA_BITS=39 +-CONFIG_SCHED_MC=y +-CONFIG_NR_CPUS=4 +-CONFIG_HOTPLUG_CPU=y +-CONFIG_ARMV8_DEPRECATED=y +-CONFIG_SWP_EMULATION=y +-CONFIG_CP15_BARRIER_EMULATION=y +-CONFIG_SETEND_EMULATION=y +- +-# +-# ARMv8.1 architectural features +-# +-CONFIG_ARM64_HW_AFDBM=y +-CONFIG_ARM64_PAN=y +-CONFIG_ARM64_LSE_ATOMICS=y +-CONFIG_ARM64_VHE=y +- +-# +-# ARMv8.2 architectural features +-# +-CONFIG_ARM64_UAO=y +-CONFIG_ARM64_MODULE_CMODEL_LARGE=n +-CONFIG_RANDOMIZE_BASE=n +- + CONFIG_BSD_PROCESS_ACCT=y + CONFIG_BSD_PROCESS_ACCT_V3=y + CONFIG_TASKSTATS=y +@@ -55,7 +12,6 @@ CONFIG_TASK_XACCT=y + CONFIG_TASK_IO_ACCOUNTING=y + CONFIG_IKCONFIG=m + CONFIG_IKCONFIG_PROC=y +-CONFIG_NMI_LOG_BUF_SHIFT=12 + CONFIG_MEMCG=y + CONFIG_BLK_CGROUP=y + CONFIG_CGROUP_FREEZER=y +@@ -69,54 +25,49 @@ CONFIG_BLK_DEV_INITRD=y + CONFIG_EMBEDDED=y + # CONFIG_COMPAT_BRK is not set + CONFIG_PROFILING=y +-CONFIG_OPROFILE=m + CONFIG_KPROBES=y + CONFIG_JUMP_LABEL=y + CONFIG_MODULES=y + CONFIG_MODULE_UNLOAD=y + CONFIG_MODVERSIONS=y + CONFIG_MODULE_SRCVERSION_ALL=y +-CONFIG_TRIM_UNUSED_KSYMS=y + CONFIG_BLK_DEV_THROTTLING=y + CONFIG_PARTITION_ADVANCED=y + CONFIG_MAC_PARTITION=y + CONFIG_CFQ_GROUP_IOSCHED=y +-CONFIG_ARCH_BCM2709=y +-# CONFIG_CACHE_L2X0 is not set +-CONFIG_SMP=y +-CONFIG_HAVE_ARM_ARCH_TIMER=y +-CONFIG_VMSPLIT_2G=y +-CONFIG_PREEMPT_VOLUNTARY=y +-CONFIG_AEABI=y +-CONFIG_OABI_COMPAT=y +-# CONFIG_CPU_SW_DOMAIN_PAN is not set ++CONFIG_ARCH_BCM2835=y ++# CONFIG_CAVIUM_ERRATUM_22375 is not set ++# CONFIG_CAVIUM_ERRATUM_23154 is not set ++# CONFIG_CAVIUM_ERRATUM_27456 is not set ++CONFIG_SCHED_MC=y ++CONFIG_NR_CPUS=4 ++CONFIG_PREEMPT=y ++CONFIG_HZ_1000=y + CONFIG_CLEANCACHE=y + CONFIG_FRONTSWAP=y + CONFIG_CMA=y + CONFIG_ZSMALLOC=m + CONFIG_PGTABLE_MAPPING=y +-CONFIG_UACCESS_WITH_MEMCPY=y + CONFIG_SECCOMP=y +-# CONFIG_ATAGS is not set +-CONFIG_ZBOOT_ROM_TEXT=0x0 +-CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_ARMV8_DEPRECATED=y ++CONFIG_SWP_EMULATION=y ++CONFIG_CP15_BARRIER_EMULATION=y ++CONFIG_SETEND_EMULATION=y + CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" ++CONFIG_BINFMT_MISC=y ++CONFIG_COMPAT=y ++# CONFIG_SUSPEND is not set ++CONFIG_PM=y ++CONFIG_CPU_IDLE=y ++CONFIG_ARM_CPUIDLE=y + CONFIG_CPU_FREQ=y ++CONFIG_CPU_FREQ_STAT=y + CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y + CONFIG_CPU_FREQ_GOV_PERFORMANCE=y + CONFIG_CPU_FREQ_GOV_USERSPACE=y + CONFIG_CPU_FREQ_GOV_ONDEMAND=y + CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y + CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y +-CONFIG_VFP=y +-CONFIG_NEON=y +-CONFIG_KERNEL_MODE_NEON=y +-CONFIG_BINFMT_MISC=m +-CONFIG_COMPAT=y +-CONFIG_SYSVIPC_COMPAT=y +- +-# CONFIG_SUSPEND is not set +-CONFIG_PM=y + CONFIG_NET=y + CONFIG_PACKET=y + CONFIG_UNIX=y +@@ -437,6 +388,7 @@ CONFIG_BT_MRVL=m + CONFIG_BT_MRVL_SDIO=m + CONFIG_BT_ATH3K=m + CONFIG_BT_WILINK=m ++CONFIG_CFG80211=m + CONFIG_MAC80211=m + CONFIG_MAC80211_MESH=y + CONFIG_WIMAX=m +@@ -490,7 +442,6 @@ CONFIG_BONDING=m + CONFIG_DUMMY=m + CONFIG_IFB=m + CONFIG_MACVLAN=m +-CONFIG_IPVLAN=m + CONFIG_VXLAN=m + CONFIG_NETCONSOLE=m + CONFIG_TUN=m +@@ -579,8 +530,6 @@ CONFIG_RT2800USB_RT3573=y + CONFIG_RT2800USB_RT53XX=y + CONFIG_RT2800USB_RT55XX=y + CONFIG_RT2800USB_UNKNOWN=y +-CONFIG_RTL8187=m +-CONFIG_RTL8192CU=n + CONFIG_USB_ZD1201=m + CONFIG_ZD1211RW=m + CONFIG_MAC80211_HWSIM=m +@@ -606,7 +555,7 @@ CONFIG_JOYSTICK_RPISENSE=m + CONFIG_INPUT_TOUCHSCREEN=y + CONFIG_TOUCHSCREEN_ADS7846=m + CONFIG_TOUCHSCREEN_EGALAX=m +-CONFIG_TOUCHSCREEN_FT6236=m ++CONFIG_TOUCHSCREEN_EKTF2127=m + CONFIG_TOUCHSCREEN_RPI_FT5406=m + CONFIG_TOUCHSCREEN_USB_COMPOSITE=m + CONFIG_TOUCHSCREEN_STMPE=m +@@ -626,10 +575,8 @@ CONFIG_SERIO_RAW=m + CONFIG_GAMEPORT=m + CONFIG_GAMEPORT_NS558=m + CONFIG_GAMEPORT_L4=m +-CONFIG_BRCM_CHAR_DRIVERS=n +-CONFIG_BCM_VC_CMA=n +-CONFIG_BCM_VCIO=n +-CONFIG_BCM_VC_SM=n ++# CONFIG_BCM2835_DEVGPIOMEM is not set ++# CONFIG_BCM2835_SMI_DEV is not set + # CONFIG_LEGACY_PTYS is not set + # CONFIG_DEVKMEM is not set + CONFIG_SERIAL_8250=y +@@ -638,6 +585,9 @@ CONFIG_SERIAL_8250_CONSOLE=y + # CONFIG_SERIAL_8250_DMA is not set + CONFIG_SERIAL_8250_NR_UARTS=1 + CONFIG_SERIAL_8250_RUNTIME_UARTS=0 ++CONFIG_SERIAL_8250_EXTENDED=y ++CONFIG_SERIAL_8250_SHARE_IRQ=y ++CONFIG_SERIAL_8250_BCM2835AUX=y + CONFIG_SERIAL_OF_PLATFORM=y + CONFIG_SERIAL_AMBA_PL011=y + CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +@@ -650,6 +600,7 @@ CONFIG_I2C=y + CONFIG_I2C_CHARDEV=m + CONFIG_I2C_MUX_PCA954x=m + CONFIG_I2C_BCM2708=m ++CONFIG_I2C_BCM2835=m + CONFIG_I2C_GPIO=m + CONFIG_SPI=y + CONFIG_SPI_BCM2835=m +@@ -681,13 +632,13 @@ CONFIG_W1_SLAVE_DS2780=m + CONFIG_W1_SLAVE_DS2781=m + CONFIG_W1_SLAVE_DS28E04=m + CONFIG_W1_SLAVE_BQ27000=m +-CONFIG_BATTERY_DS2760=m +-CONFIG_POWER_RESET=y + CONFIG_POWER_RESET_GPIO=y ++CONFIG_BATTERY_DS2760=m + CONFIG_HWMON=m + CONFIG_SENSORS_LM75=m + CONFIG_SENSORS_SHT21=m + CONFIG_SENSORS_SHTC1=m ++CONFIG_SENSORS_INA2XX=m + CONFIG_THERMAL=y + CONFIG_THERMAL_BCM2835=y + CONFIG_WATCHDOG=y +@@ -835,8 +786,6 @@ CONFIG_VIDEO_EM28XX_V4L2=m + CONFIG_VIDEO_EM28XX_ALSA=m + CONFIG_VIDEO_EM28XX_DVB=m + CONFIG_V4L_PLATFORM_DRIVERS=y +-CONFIG_VIDEO_BCM2835=n +-CONFIG_VIDEO_BCM2835_MMAL=n + CONFIG_RADIO_SI470X=y + CONFIG_USB_SI470X=m + CONFIG_I2C_SI470X=m +@@ -892,8 +841,6 @@ CONFIG_SND_VIRMIDI=m + CONFIG_SND_MTPAV=m + CONFIG_SND_SERIAL_U16550=m + CONFIG_SND_MPU401=m +-CONFIG_SND_ARM=n +-CONFIG_SND_BCM2835=n + CONFIG_SND_USB_AUDIO=m + CONFIG_SND_USB_UA101=m + CONFIG_SND_USB_CAIAQ=m +@@ -916,7 +863,10 @@ CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m + CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m + CONFIG_SND_DIGIDAC1_SOUNDCARD=m + CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m ++CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m ++CONFIG_SND_PISOUND=m + CONFIG_SND_SOC_ADAU1701=m ++CONFIG_SND_SOC_AK4554=m + CONFIG_SND_SOC_WM8804_I2C=m + CONFIG_SND_SIMPLE_CARD=m + CONFIG_SOUND_PRIME=m +@@ -979,8 +929,6 @@ CONFIG_USB_HIDDEV=y + CONFIG_USB=y + CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + CONFIG_USB_MON=m +-CONFIG_USB_DWCOTG=n +-CONFIG_USB_DWC2=y + CONFIG_USB_PRINTER=m + CONFIG_USB_STORAGE=y + CONFIG_USB_STORAGE_REALTEK=m +@@ -1001,6 +949,7 @@ CONFIG_USB_MICROTEK=m + CONFIG_USBIP_CORE=m + CONFIG_USBIP_VHCI_HCD=m + CONFIG_USBIP_HOST=m ++CONFIG_USB_DWC2=y + CONFIG_USB_SERIAL=m + CONFIG_USB_SERIAL_GENERIC=y + CONFIG_USB_SERIAL_AIRCABLE=m +@@ -1096,6 +1045,7 @@ CONFIG_LEDS_TRIGGER_INPUT=y + CONFIG_LEDS_TRIGGER_PANIC=y + CONFIG_RTC_CLASS=y + # CONFIG_RTC_HCTOSYS is not set ++CONFIG_RTC_DRV_ABX80X=m + CONFIG_RTC_DRV_DS1307=m + CONFIG_RTC_DRV_DS1374=m + CONFIG_RTC_DRV_DS1672=m +@@ -1103,7 +1053,6 @@ CONFIG_RTC_DRV_MAX6900=m + CONFIG_RTC_DRV_RS5C372=m + CONFIG_RTC_DRV_ISL1208=m + CONFIG_RTC_DRV_ISL12022=m +-CONFIG_RTC_DRV_ISL12057=m + CONFIG_RTC_DRV_X1205=m + CONFIG_RTC_DRV_PCF8523=m + CONFIG_RTC_DRV_PCF8563=m +@@ -1137,7 +1086,6 @@ CONFIG_STAGING=y + CONFIG_PRISM2_USB=m + CONFIG_R8712U=m + CONFIG_R8188EU=m +-CONFIG_R8723AU=m + CONFIG_VT6656=m + CONFIG_SPEAKUP=m + CONFIG_SPEAKUP_SYNTH_SOFT=m +@@ -1153,6 +1101,7 @@ CONFIG_FB_TFT_BD663474=m + CONFIG_FB_TFT_HX8340BN=m + CONFIG_FB_TFT_HX8347D=m + CONFIG_FB_TFT_HX8353D=m ++CONFIG_FB_TFT_HX8357D=m + CONFIG_FB_TFT_ILI9163=m + CONFIG_FB_TFT_ILI9320=m + CONFIG_FB_TFT_ILI9325=m +@@ -1176,6 +1125,7 @@ CONFIG_FB_TFT_UPD161704=m + CONFIG_FB_TFT_WATTEROTT=m + CONFIG_FB_FLEX=m + CONFIG_FB_TFT_FBTFT_DEVICE=m ++# CONFIG_BCM2708_VCHIQ is not set + CONFIG_MAILBOX=y + CONFIG_BCM2835_MBOX=y + # CONFIG_IOMMU_SUPPORT is not set +@@ -1189,6 +1139,7 @@ CONFIG_IIO_KFIFO_BUF=m + CONFIG_MCP320X=m + CONFIG_MCP3422=m + CONFIG_DHT11=m ++CONFIG_HTU21=m + CONFIG_PWM_BCM2835=m + CONFIG_PWM_PCA9685=m + CONFIG_RASPBERRYPI_FIRMWARE=y +@@ -1309,6 +1260,7 @@ CONFIG_BOOT_PRINTK_DELAY=y + CONFIG_DEBUG_MEMORY_INIT=y + CONFIG_DETECT_HUNG_TASK=y + CONFIG_TIMER_STATS=y ++CONFIG_LATENCYTOP=y + CONFIG_IRQSOFF_TRACER=y + CONFIG_SCHED_TRACER=y + CONFIG_STACK_TRACER=y +@@ -1331,5 +1283,3 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m + CONFIG_ARM64_CRYPTO=y + CONFIG_CRC_ITU_T=y + CONFIG_LIBCRC32C=y +-CONFIG_BCM2708_VCHIQ=n +-CONFIG_ARCH_BCM2835=y +-- +2.1.4 + diff --git a/target/linux/brcm2708/patches-4.9/950-0122-ARM64-Enable-Kernel-Address-Space-Randomization-1792.patch b/target/linux/brcm2708/patches-4.9/950-0122-ARM64-Enable-Kernel-Address-Space-Randomization-1792.patch new file mode 100644 index 000000000000..423db95e9e23 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0122-ARM64-Enable-Kernel-Address-Space-Randomization-1792.patch @@ -0,0 +1,31 @@ +From 6dfa60daaa0966a8e414ab0a7fd002a99001920a Mon Sep 17 00:00:00 2001 +From: Electron752 +Date: Sat, 14 Jan 2017 02:54:26 -0800 +Subject: [PATCH] ARM64: Enable Kernel Address Space Randomization (#1792) + +Randomization allows the mapping between virtual addresses and physical +address to be different on each boot. This makes it more difficult +to exploit security vulnerabilities that require knowledge of fixed +hardware addresses. + +The firmware generates a 8 byte random number during bootup and stores +it in the device tree under chosen/kaslr-seed. This number is used +to randomize the address mapping. + +This change enables this feature in the build configuration for ARM64. + +Signed-off-by: Michael Zoran +--- + arch/arm64/configs/bcmrpi3_defconfig | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm64/configs/bcmrpi3_defconfig ++++ b/arch/arm64/configs/bcmrpi3_defconfig +@@ -53,6 +53,7 @@ CONFIG_ARMV8_DEPRECATED=y + CONFIG_SWP_EMULATION=y + CONFIG_CP15_BARRIER_EMULATION=y + CONFIG_SETEND_EMULATION=y ++CONFIG_RANDOMIZE_BASE=y + CONFIG_CMDLINE="console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" + CONFIG_BINFMT_MISC=y + CONFIG_COMPAT=y diff --git a/target/linux/brcm2708/patches-4.9/950-0124-ARM64-Enable-RTL8187-RTL8192CU-wifi-in-build-config.patch b/target/linux/brcm2708/patches-4.9/950-0124-ARM64-Enable-RTL8187-RTL8192CU-wifi-in-build-config.patch new file mode 100644 index 000000000000..c947a74c5de5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0124-ARM64-Enable-RTL8187-RTL8192CU-wifi-in-build-config.patch @@ -0,0 +1,25 @@ +From 564df2de35a212639eb7e357442f35fa89bcbde4 Mon Sep 17 00:00:00 2001 +From: Michael Zoran +Date: Sun, 15 Jan 2017 07:31:59 -0800 +Subject: [PATCH] ARM64: Enable RTL8187/RTL8192CU wifi in build config + +These drivers build now, so they can be enabled back +in the build configuration just like they are for +32 bit. + +Signed-off-by: Michael Zoran +--- + arch/arm64/configs/bcmrpi3_defconfig | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm64/configs/bcmrpi3_defconfig ++++ b/arch/arm64/configs/bcmrpi3_defconfig +@@ -531,6 +531,8 @@ CONFIG_RT2800USB_RT3573=y + CONFIG_RT2800USB_RT53XX=y + CONFIG_RT2800USB_RT55XX=y + CONFIG_RT2800USB_UNKNOWN=y ++CONFIG_RTL8187=m ++CONFIG_RTL8192CU=m + CONFIG_USB_ZD1201=m + CONFIG_ZD1211RW=m + CONFIG_MAC80211_HWSIM=m diff --git a/target/linux/brcm2708/patches-4.9/950-0125-BCM270X_DT-Add-spi0-cs-overlay.patch b/target/linux/brcm2708/patches-4.9/950-0125-BCM270X_DT-Add-spi0-cs-overlay.patch new file mode 100644 index 000000000000..2fd8366f4ee2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0125-BCM270X_DT-Add-spi0-cs-overlay.patch @@ -0,0 +1,83 @@ +From 48eea36959fb8d854b4cf1ee4284646be5a279e0 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 16 Jan 2017 14:53:12 +0000 +Subject: [PATCH] BCM270X_DT: Add spi0-cs overlay + +The spi0-cs overlay allows the software chip selectts to be modified +using the cs0_pin and cs1_pin parameters. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 9 +++++++- + arch/arm/boot/dts/overlays/spi0-cs-overlay.dts | 29 ++++++++++++++++++++++++++ + 3 files changed, 38 insertions(+), 1 deletion(-) + create mode 100644 arch/arm/boot/dts/overlays/spi0-cs-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -83,6 +83,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + smi-nand.dtbo \ + spi-gpio35-39.dtbo \ + spi-rtc.dtbo \ ++ spi0-cs.dtbo \ + spi0-hw-cs.dtbo \ + spi1-1cs.dtbo \ + spi1-2cs.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1138,7 +1138,7 @@ Params: + + + Name: spi-gpio35-39 +-Info: move SPI function block to GPIO 35 to 39 ++Info: Move SPI function block to GPIO 35 to 39 + Load: dtoverlay=spi-gpio35-39 + Params: + +@@ -1149,6 +1149,13 @@ Load: dtoverlay=spi-rtc,= + Params: pcf2123 Select the PCF2123 device + + ++Name: spi0-cs ++Info: Allows the (software) CS pins for SPI0 to be changed ++Load: dtoverlay=spi0-cs,= ++Params: cs0_pin GPIO pin for CS0 (default 8) ++ cs1_pin GPIO pin for CS1 (default 7) ++ ++ + Name: spi0-hw-cs + Info: Re-enables hardware CS/CE (chip selects) for SPI0 + Load: dtoverlay=spi0-hw-cs +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/spi0-cs-overlay.dts +@@ -0,0 +1,29 @@ ++/dts-v1/; ++/plugin/; ++ ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spi0_cs_pins>; ++ frag0: __overlay__ { ++ brcm,pins = <8 7>; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spi0>; ++ frag1: __overlay__ { ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ status = "okay"; ++ }; ++ }; ++ ++ __overrides__ { ++ cs0_pin = <&frag0>,"brcm,pins:0", ++ <&frag1>,"cs-gpios:4"; ++ cs1_pin = <&frag0>,"brcm,pins:4", ++ <&frag1>,"cs-gpios:16"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.9/950-0126-spi-bcm2835-Disable-forced-software-CS.patch b/target/linux/brcm2708/patches-4.9/950-0126-spi-bcm2835-Disable-forced-software-CS.patch new file mode 100644 index 000000000000..544ccf6f0b0f --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0126-spi-bcm2835-Disable-forced-software-CS.patch @@ -0,0 +1,26 @@ +From a6ef8db0e46713da43c81bc15fed01a4da0bd5a4 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 1 Jul 2016 22:09:24 +0100 +Subject: [PATCH] spi-bcm2835: Disable forced software CS + +Select software CS in bcm2708_common.dtsi, and disable the automatic +conversion in the driver to allow hardware CS to be re-enabled with an +overlay. + +See: https://github.com/raspberrypi/linux/issues/1547 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm283x.dtsi | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -163,6 +163,7 @@ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; + }; + + i2c0: i2c@7e205000 { diff --git a/target/linux/brcm2708/patches-4.9/950-0127-config-Add-CONFIG_TCP_CONG_BBR.patch b/target/linux/brcm2708/patches-4.9/950-0127-config-Add-CONFIG_TCP_CONG_BBR.patch new file mode 100644 index 000000000000..cec560e06e1e --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0127-config-Add-CONFIG_TCP_CONG_BBR.patch @@ -0,0 +1,33 @@ +From 6f95da255ded5f1da673f826de07963e6a619e3d Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Mon, 16 Jan 2017 16:33:54 +0000 +Subject: [PATCH] config: Add CONFIG_TCP_CONG_BBR See: + https://github.com/raspberrypi/linux/issues/1784 + +--- + arch/arm/configs/bcm2709_defconfig | 2 ++ + arch/arm/configs/bcmrpi_defconfig | 2 ++ + 2 files changed, 4 insertions(+) + +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -99,6 +99,8 @@ CONFIG_INET_XFRM_MODE_TRANSPORT=m + CONFIG_INET_XFRM_MODE_TUNNEL=m + CONFIG_INET_XFRM_MODE_BEET=m + CONFIG_INET_DIAG=m ++CONFIG_TCP_CONG_ADVANCED=y ++CONFIG_TCP_CONG_BBR=m + CONFIG_IPV6=m + CONFIG_IPV6_ROUTER_PREF=y + CONFIG_INET6_AH=m +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -95,6 +95,8 @@ CONFIG_INET_XFRM_MODE_TRANSPORT=m + CONFIG_INET_XFRM_MODE_TUNNEL=m + CONFIG_INET_XFRM_MODE_BEET=m + CONFIG_INET_DIAG=m ++CONFIG_TCP_CONG_ADVANCED=y ++CONFIG_TCP_CONG_BBR=m + CONFIG_IPV6=m + CONFIG_IPV6_ROUTER_PREF=y + CONFIG_INET6_AH=m diff --git a/target/linux/brcm2708/patches-4.9/950-0128-BCM270X_DT-Enable-UART0-on-CM3.patch b/target/linux/brcm2708/patches-4.9/950-0128-BCM270X_DT-Enable-UART0-on-CM3.patch new file mode 100644 index 000000000000..4fbc443dcd28 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0128-BCM270X_DT-Enable-UART0-on-CM3.patch @@ -0,0 +1,23 @@ +From 44586947e86f67ad71fdd3afca51f04fc27f3872 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 17 Jan 2017 11:34:58 +0000 +Subject: [PATCH] BCM270X_DT: Enable UART0 on CM3 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +@@ -6,6 +6,10 @@ + model = "Raspberry Pi Compute Module 3"; + }; + ++&uart0 { ++ status = "okay"; ++}; ++ + &gpio { + sdhost_pins: sdhost_pins { + brcm,pins = <48 49 50 51 52 53>; diff --git a/target/linux/brcm2708/patches-4.9/950-0129-config-Add-CONFIG_MD_M25P80-and-CONFIG_MD_SPI_NOR.patch b/target/linux/brcm2708/patches-4.9/950-0129-config-Add-CONFIG_MD_M25P80-and-CONFIG_MD_SPI_NOR.patch new file mode 100644 index 000000000000..ab5e409006b1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0129-config-Add-CONFIG_MD_M25P80-and-CONFIG_MD_SPI_NOR.patch @@ -0,0 +1,37 @@ +From 3f6ad80c79570b157d651720bf161843a360e922 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 17 Jan 2017 14:39:39 +0000 +Subject: [PATCH] config: Add CONFIG_MD_M25P80 and CONFIG_MD_SPI_NOR + +See: https://github.com/raspberrypi/linux/issues/1781 + +Signed-off-by: Phil Elwell +--- + arch/arm/configs/bcm2709_defconfig | 2 ++ + arch/arm/configs/bcmrpi_defconfig | 2 ++ + 2 files changed, 4 insertions(+) + +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -406,7 +406,9 @@ CONFIG_DMA_CMA=y + CONFIG_CMA_SIZE_MBYTES=5 + CONFIG_MTD=m + CONFIG_MTD_BLOCK=m ++CONFIG_MTD_M25P80=m + CONFIG_MTD_NAND=m ++CONFIG_MTD_SPI_NOR=m + CONFIG_MTD_UBI=m + CONFIG_OF_CONFIGFS=y + CONFIG_ZRAM=m +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -402,7 +402,9 @@ CONFIG_DMA_CMA=y + CONFIG_CMA_SIZE_MBYTES=5 + CONFIG_MTD=m + CONFIG_MTD_BLOCK=m ++CONFIG_MTD_M25P80=m + CONFIG_MTD_NAND=m ++CONFIG_MTD_SPI_NOR=m + CONFIG_MTD_UBI=m + CONFIG_OF_CONFIGFS=y + CONFIG_ZRAM=m diff --git a/target/linux/brcm2708/patches-4.9/950-0130-ARM64-DWC_OTG-Port-dwc_otg-driver-to-ARM64.patch b/target/linux/brcm2708/patches-4.9/950-0130-ARM64-DWC_OTG-Port-dwc_otg-driver-to-ARM64.patch new file mode 100644 index 000000000000..a94fee4690c6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0130-ARM64-DWC_OTG-Port-dwc_otg-driver-to-ARM64.patch @@ -0,0 +1,329 @@ +From 99c33b6e418cefebb461fee0ad3a927a0c4127f1 Mon Sep 17 00:00:00 2001 +From: Michael Zoran +Date: Sat, 14 Jan 2017 21:33:51 -0800 +Subject: [PATCH] ARM64/DWC_OTG: Port dwc_otg driver to ARM64 + +In ARM64, the FIQ mechanism used by this driver is not current +implemented. As a workaround, reqular IRQ is used instead +of FIQ. + +In a separate change, the IRQ-CPU mapping is round robined +on ARM64 to increase concurrency and allow multiple interrupts +to be serviced at a time. This reduces the need for FIQ. + +Tests Run: + +This mechanism is most likely to break when multiple USB devices +are attached at the same time. So the system was tested under +stress. + +Devices: + +1. USB Speakers playing back a FLAC audio through VLC + at 96KHz.(Higher then typically, but supported on my speakers). + +2. sftp transferring large files through the buildin ethernet + connection which is connected through USB. + +3. Keyboard and mouse attached and being used. + +Although I do occasionally hear some glitches, the music seems to +play quite well. + +Signed-off-by: Michael Zoran +--- + drivers/usb/host/dwc_otg/Makefile | 3 ++ + drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 17 +++++++ + drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h | 24 ++++++++++ + drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 4 ++ + drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h | 4 ++ + drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c | 3 +- + drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 72 ++++++++++++++++++++++++++++ + drivers/usb/host/dwc_otg/dwc_otg_os_dep.h | 2 + + 8 files changed, 128 insertions(+), 1 deletion(-) + +--- a/drivers/usb/host/dwc_otg/Makefile ++++ b/drivers/usb/host/dwc_otg/Makefile +@@ -37,7 +37,10 @@ dwc_otg-objs += dwc_otg_pcd_linux.o dwc_ + dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_linux.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o dwc_otg_hcd_ddma.o + dwc_otg-objs += dwc_otg_adp.o + dwc_otg-objs += dwc_otg_fiq_fsm.o ++ifneq ($(CONFIG_ARM64),y) + dwc_otg-objs += dwc_otg_fiq_stub.o ++endif ++ + ifneq ($(CFI),) + dwc_otg-objs += dwc_otg_cfi.o + endif +--- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c +@@ -74,6 +74,21 @@ void notrace _fiq_print(enum fiq_debug_l + } + } + ++ ++#ifdef CONFIG_ARM64 ++ ++inline void fiq_fsm_spin_lock(fiq_lock_t *lock) ++{ ++ spin_lock((spinlock_t *)lock); ++} ++ ++inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) ++{ ++ spin_unlock((spinlock_t *)lock); ++} ++ ++#else ++ + /** + * fiq_fsm_spin_lock() - ARMv6+ bare bones spinlock + * Must be called with local interrupts and FIQ disabled. +@@ -122,6 +137,8 @@ inline void fiq_fsm_spin_unlock(fiq_lock + inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) { } + #endif + ++#endif ++ + /** + * fiq_fsm_restart_channel() - Poke channel enable bit for a split transaction + * @channel: channel to re-enable +--- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h +@@ -127,6 +127,12 @@ enum fiq_debug_level { + FIQDBG_PORTHUB = (1 << 3), + }; + ++#ifdef CONFIG_ARM64 ++ ++typedef spinlock_t fiq_lock_t; ++ ++#else ++ + typedef struct { + union { + uint32_t slock; +@@ -137,6 +143,8 @@ typedef struct { + }; + } fiq_lock_t; + ++#endif ++ + struct fiq_state; + + extern void _fiq_print (enum fiq_debug_level dbg_lvl, volatile struct fiq_state *state, char *fmt, ...); +@@ -355,6 +363,22 @@ struct fiq_state { + struct fiq_channel_state channel[0]; + }; + ++#ifdef CONFIG_ARM64 ++ ++#ifdef local_fiq_enable ++#undef local_fiq_enable ++#endif ++ ++#ifdef local_fiq_disable ++#undef local_fiq_disable ++#endif ++ ++extern void local_fiq_enable(void); ++ ++extern void local_fiq_disable(void); ++ ++#endif ++ + extern void fiq_fsm_spin_lock(fiq_lock_t *lock); + + extern void fiq_fsm_spin_unlock(fiq_lock_t *lock); +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c +@@ -1021,6 +1021,10 @@ int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd + } + DWC_MEMSET(hcd->fiq_state, 0, (sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels))); + ++#ifdef CONFIG_ARM64 ++ spin_lock_init(&hcd->fiq_state->lock); ++#endif ++ + for (i = 0; i < num_channels; i++) { + hcd->fiq_state->channel[i].fsm = FIQ_PASSTHROUGH; + } +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h +@@ -116,7 +116,11 @@ extern int32_t dwc_otg_hcd_handle_intr(d + /** This function is used to handle the fast interrupt + * + */ ++#ifdef CONFIG_ARM64 ++extern void dwc_otg_hcd_handle_fiq(void); ++#else + extern void __attribute__ ((naked)) dwc_otg_hcd_handle_fiq(void); ++#endif + + /** + * Returns private data set by +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c +@@ -36,8 +36,9 @@ + #include "dwc_otg_regs.h" + + #include ++#ifdef CONFIG_ARM + #include +- ++#endif + + extern bool microframe_schedule; + +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +@@ -51,7 +51,9 @@ + #include + #include + #include ++#ifdef CONFIG_ARM + #include ++#endif + #include + #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) + #include <../drivers/usb/core/hcd.h> +@@ -71,6 +73,13 @@ + #include "dwc_otg_driver.h" + #include "dwc_otg_hcd.h" + ++#ifndef __virt_to_bus ++#define __virt_to_bus __virt_to_phys ++#define __bus_to_virt __phys_to_virt ++#define __pfn_to_bus(x) __pfn_to_phys(x) ++#define __bus_to_pfn(x) __phys_to_pfn(x) ++#endif ++ + extern unsigned char _dwc_otg_fiq_stub, _dwc_otg_fiq_stub_end; + + /** +@@ -393,14 +402,49 @@ static struct dwc_otg_hcd_function_ops h + .get_b_hnp_enable = _get_b_hnp_enable, + }; + ++#ifdef CONFIG_ARM64 ++ ++static int simfiq_irq = -1; ++ ++void local_fiq_enable(void) ++{ ++ if (simfiq_irq >= 0) ++ enable_irq(simfiq_irq); ++} ++ ++void local_fiq_disable(void) ++{ ++ if (simfiq_irq >= 0) ++ disable_irq(simfiq_irq); ++} ++ ++irqreturn_t fiq_irq_handler(int irq, void *dev_id) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *)dev_id; ++ ++ if (fiq_fsm_enable) ++ dwc_otg_fiq_fsm(dwc_otg_hcd->fiq_state, dwc_otg_hcd->core_if->core_params->host_channels); ++ else ++ dwc_otg_fiq_nop(dwc_otg_hcd->fiq_state); ++ ++ return IRQ_HANDLED; ++} ++ ++#else + static struct fiq_handler fh = { + .name = "usb_fiq", + }; + ++#endif ++ + static void hcd_init_fiq(void *cookie) + { + dwc_otg_device_t *otg_dev = cookie; + dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd; ++#ifdef CONFIG_ARM64 ++ int retval = 0; ++ int irq; ++#else + struct pt_regs regs; + int irq; + +@@ -428,6 +472,7 @@ static void hcd_init_fiq(void *cookie) + + // __show_regs(®s); + set_fiq_regs(®s); ++#endif + + //Set the mphi periph to the required registers + dwc_otg_hcd->fiq_state->mphi_regs.base = otg_dev->os_dep.mphi_base; +@@ -446,6 +491,23 @@ static void hcd_init_fiq(void *cookie) + DWC_WARN("MPHI periph has NOT been enabled"); + #endif + // Enable FIQ interrupt from USB peripheral ++#ifdef CONFIG_ARM64 ++ irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); ++ ++ if (irq < 0) { ++ DWC_ERROR("Can't get SIM-FIQ irq"); ++ return; ++ } ++ ++ retval = request_irq(irq, fiq_irq_handler, 0, "dwc_otg_sim-fiq", dwc_otg_hcd); ++ ++ if (retval < 0) { ++ DWC_ERROR("Unable to request SIM-FIQ irq\n"); ++ return; ++ } ++ ++ simfiq_irq = irq; ++#else + #ifdef CONFIG_MULTI_IRQ_HANDLER + irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); + #else +@@ -457,6 +519,8 @@ static void hcd_init_fiq(void *cookie) + } + enable_fiq(irq); + local_fiq_enable(); ++#endif ++ + } + + /** +@@ -519,6 +583,13 @@ int hcd_init(dwc_bus_dev_t *_dev) + otg_dev->hcd = dwc_otg_hcd; + otg_dev->hcd->otg_dev = otg_dev; + ++#ifdef CONFIG_ARM64 ++ if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) ++ goto error2; ++ ++ if (fiq_enable) ++ hcd_init_fiq(otg_dev); ++#else + if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) { + goto error2; + } +@@ -531,6 +602,7 @@ int hcd_init(dwc_bus_dev_t *_dev) + smp_call_function_single(0, hcd_init_fiq, otg_dev, 1); + } + } ++#endif + + hcd->self.otg_port = dwc_otg_hcd_otg_port(dwc_otg_hcd); + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33) //don't support for LM(with 2.6.20.1 kernel) +--- a/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h ++++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h +@@ -76,8 +76,10 @@ + + #ifdef PLATFORM_INTERFACE + #include ++#ifdef CONFIG_ARM + #include + #endif ++#endif + + /** The OS page size */ + #define DWC_OS_PAGE_SIZE PAGE_SIZE diff --git a/target/linux/brcm2708/patches-4.9/950-0131-ARM64-Round-Robin-dispatch-IRQs-between-CPUs.patch b/target/linux/brcm2708/patches-4.9/950-0131-ARM64-Round-Robin-dispatch-IRQs-between-CPUs.patch new file mode 100644 index 000000000000..d11ca6bffdc1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0131-ARM64-Round-Robin-dispatch-IRQs-between-CPUs.patch @@ -0,0 +1,72 @@ +From 3a9b48156c6681e846d1a7dbe4ecbb3ae14c2f3c Mon Sep 17 00:00:00 2001 +From: Michael Zoran +Date: Sat, 14 Jan 2017 21:43:57 -0800 +Subject: [PATCH] ARM64: Round-Robin dispatch IRQs between CPUs. + +IRQ-CPU mapping is round robined on ARM64 to increase +concurrency and allow multiple interrupts to be serviced +at a time. This reduces the need for FIQ. + +Signed-off-by: Michael Zoran +--- + drivers/irqchip/irq-bcm2835.c | 15 ++++++++++++++- + drivers/irqchip/irq-bcm2836.c | 21 +++++++++++++++++++++ + 2 files changed, 35 insertions(+), 1 deletion(-) + +--- a/drivers/irqchip/irq-bcm2835.c ++++ b/drivers/irqchip/irq-bcm2835.c +@@ -168,10 +168,23 @@ static void armctrl_unmask_irq(struct ir + } + } + ++#ifdef CONFIG_ARM64 ++void bcm2836_arm_irqchip_spin_gpu_irq(void); ++ ++static void armctrl_ack_irq(struct irq_data *d) ++{ ++ bcm2836_arm_irqchip_spin_gpu_irq(); ++} ++ ++#endif ++ + static struct irq_chip armctrl_chip = { + .name = "ARMCTRL-level", + .irq_mask = armctrl_mask_irq, +- .irq_unmask = armctrl_unmask_irq ++ .irq_unmask = armctrl_unmask_irq, ++#ifdef CONFIG_ARM64 ++ .irq_ack = armctrl_ack_irq ++#endif + }; + + static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr, +--- a/drivers/irqchip/irq-bcm2836.c ++++ b/drivers/irqchip/irq-bcm2836.c +@@ -145,6 +145,27 @@ static void bcm2836_arm_irqchip_unmask_g + { + } + ++#ifdef CONFIG_ARM64 ++ ++void bcm2836_arm_irqchip_spin_gpu_irq(void) ++{ ++ u32 i; ++ void __iomem *gpurouting = (intc.base + LOCAL_GPU_ROUTING); ++ u32 routing_val = readl(gpurouting); ++ ++ for (i = 1; i <= 3; i++) { ++ u32 new_routing_val = (routing_val + i) & 3; ++ ++ if (cpu_active(new_routing_val)) { ++ writel(new_routing_val, gpurouting); ++ return; ++ } ++ } ++} ++EXPORT_SYMBOL(bcm2836_arm_irqchip_spin_gpu_irq); ++ ++#endif ++ + static struct irq_chip bcm2836_arm_irqchip_gpu = { + .name = "bcm2836-gpu", + .irq_mask = bcm2836_arm_irqchip_mask_gpu_irq, diff --git a/target/linux/brcm2708/patches-4.9/950-0132-ARM64-Enable-DWC_OTG-Driver-In-ARM64-Build-Config-bc.patch b/target/linux/brcm2708/patches-4.9/950-0132-ARM64-Enable-DWC_OTG-Driver-In-ARM64-Build-Config-bc.patch new file mode 100644 index 000000000000..deae274af339 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0132-ARM64-Enable-DWC_OTG-Driver-In-ARM64-Build-Config-bc.patch @@ -0,0 +1,21 @@ +From ad17c9e5a03f835605560e7163e5e685a67abd1f Mon Sep 17 00:00:00 2001 +From: Michael Zoran +Date: Sat, 14 Jan 2017 21:45:03 -0800 +Subject: [PATCH] ARM64: Enable DWC_OTG Driver In ARM64 Build + Config(bcmrpi3_defconfig) + +Signed-off-by: Michael Zoran +--- + arch/arm64/configs/bcmrpi3_defconfig | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm64/configs/bcmrpi3_defconfig ++++ b/arch/arm64/configs/bcmrpi3_defconfig +@@ -932,6 +932,7 @@ CONFIG_USB_HIDDEV=y + CONFIG_USB=y + CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + CONFIG_USB_MON=m ++CONFIG_USB_DWCOTG=y + CONFIG_USB_PRINTER=m + CONFIG_USB_STORAGE=y + CONFIG_USB_STORAGE_REALTEK=m diff --git a/target/linux/brcm2708/patches-4.9/950-0133-ARM64-Use-dwc_otg-driver-by-default-for-USB.patch b/target/linux/brcm2708/patches-4.9/950-0133-ARM64-Use-dwc_otg-driver-by-default-for-USB.patch new file mode 100644 index 000000000000..53335b95fb71 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0133-ARM64-Use-dwc_otg-driver-by-default-for-USB.patch @@ -0,0 +1,26 @@ +From 4eec6ce872ac46987efeb9b9cdab0ad78a563bdb Mon Sep 17 00:00:00 2001 +From: Michael Zoran +Date: Sat, 14 Jan 2017 21:46:04 -0800 +Subject: [PATCH] ARM64: Use dwc_otg driver by default for USB. + +If it breaks on anybody, they can use the standard device tree +overlays to switch back to the dwc2 driver. + +Signed-off-by: Michael Zoran +--- + arch/arm/boot/dts/bcm2710.dtsi | 7 ------- + 1 file changed, 7 deletions(-) + +--- a/arch/arm/boot/dts/bcm2710.dtsi ++++ b/arch/arm/boot/dts/bcm2710.dtsi +@@ -146,10 +146,3 @@ + interrupts = <8>; + }; + +-#ifdef RPI364 +-&usb { +- compatible = "brcm,bcm2835-usb"; +- reg = <0x7e980000 0x10000>; +- interrupts = <1 9>; +-}; +-#endif diff --git a/target/linux/brcm2708/patches-4.9/950-0134-BCM270X_DT-Add-reference-to-audio_pins-to-CM-dtb.patch b/target/linux/brcm2708/patches-4.9/950-0134-BCM270X_DT-Add-reference-to-audio_pins-to-CM-dtb.patch new file mode 100644 index 000000000000..63df4a03787c --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0134-BCM270X_DT-Add-reference-to-audio_pins-to-CM-dtb.patch @@ -0,0 +1,28 @@ +From 8630b0b3fea31138c52ef83848ae1a047baa3855 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 23 Jan 2017 17:36:50 +0000 +Subject: [PATCH] BCM270X_DT: Add reference to audio_pins to CM dtb + +The CM1 dtb contains an empty audio_pins node, but no reference to it. +Adding the usual pinctrl reference from the audio node enables the +audremap overlay (and others) to easily turn on audio. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2708-rpi-cm.dts | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts +@@ -85,6 +85,11 @@ + pinctrl-0 = <&i2s_pins>; + }; + ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ + &hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + }; diff --git a/target/linux/brcm2708/patches-4.9/950-0135-config-Add-additional-network-scheduling-modules.patch b/target/linux/brcm2708/patches-4.9/950-0135-config-Add-additional-network-scheduling-modules.patch new file mode 100644 index 000000000000..6c50870c7eb2 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0135-config-Add-additional-network-scheduling-modules.patch @@ -0,0 +1,50 @@ +From 56aef4ffcf12fdede0dad012de939c5a7c9cc55b Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Wed, 25 Jan 2017 11:30:38 +0000 +Subject: [PATCH] config: Add additional network scheduling modules + +--- + arch/arm/configs/bcm2709_defconfig | 4 ++++ + arch/arm/configs/bcmrpi_defconfig | 4 ++++ + 2 files changed, 8 insertions(+) + +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -296,6 +296,7 @@ CONFIG_NET_SCHED=y + CONFIG_NET_SCH_CBQ=m + CONFIG_NET_SCH_HTB=m + CONFIG_NET_SCH_HFSC=m ++CONFIG_NET_SCH_ATM=m + CONFIG_NET_SCH_PRIO=m + CONFIG_NET_SCH_MULTIQ=m + CONFIG_NET_SCH_RED=m +@@ -312,6 +313,9 @@ CONFIG_NET_SCH_CHOKE=m + CONFIG_NET_SCH_QFQ=m + CONFIG_NET_SCH_CODEL=m + CONFIG_NET_SCH_FQ_CODEL=m ++CONFIG_NET_SCH_FQ=m ++CONFIG_NET_SCH_HHF=m ++CONFIG_NET_SCH_PIE=m + CONFIG_NET_SCH_INGRESS=m + CONFIG_NET_SCH_PLUG=m + CONFIG_NET_CLS_BASIC=m +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -292,6 +292,7 @@ CONFIG_NET_SCHED=y + CONFIG_NET_SCH_CBQ=m + CONFIG_NET_SCH_HTB=m + CONFIG_NET_SCH_HFSC=m ++CONFIG_NET_SCH_ATM=m + CONFIG_NET_SCH_PRIO=m + CONFIG_NET_SCH_MULTIQ=m + CONFIG_NET_SCH_RED=m +@@ -308,6 +309,9 @@ CONFIG_NET_SCH_CHOKE=m + CONFIG_NET_SCH_QFQ=m + CONFIG_NET_SCH_CODEL=m + CONFIG_NET_SCH_FQ_CODEL=m ++CONFIG_NET_SCH_FQ=m ++CONFIG_NET_SCH_HHF=m ++CONFIG_NET_SCH_PIE=m + CONFIG_NET_SCH_INGRESS=m + CONFIG_NET_SCH_PLUG=m + CONFIG_NET_CLS_BASIC=m diff --git a/target/linux/brcm2708/patches-4.9/950-0136-ASoC-A-simple-card-overlay-for-ADAU7002.patch b/target/linux/brcm2708/patches-4.9/950-0136-ASoC-A-simple-card-overlay-for-ADAU7002.patch new file mode 100644 index 000000000000..4f122fcdb020 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0136-ASoC-A-simple-card-overlay-for-ADAU7002.patch @@ -0,0 +1,93 @@ +From 1cd1f19adbe020544e18193a006af9c71c8c82ca Mon Sep 17 00:00:00 2001 +From: chris johnson +Date: Sun, 22 Jan 2017 03:27:31 +0000 +Subject: [PATCH] ASoC: A simple-card overlay for ADAU7002 + +Usage: `dtoverlay=adau7002-simple` +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 6 +++ + .../boot/dts/overlays/adau7002-simple-overlay.dts | 52 ++++++++++++++++++++++ + 3 files changed, 59 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -2,6 +2,7 @@ + + dtbo-$(CONFIG_ARCH_BCM2835) += \ + adau1977-adc.dtbo \ ++ adau7002-simple.dtbo \ + ads1015.dtbo \ + ads7846.dtbo \ + akkordion-iqdacplus.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -168,6 +168,12 @@ Load: dtoverlay=adau1977-adc + Params: + + ++Name: adau7002-simple ++Info: Overlay for the activation of ADAU7002 stereo PDM to I2S converter. ++Load: dtoverlay=adau7002-simple,= ++Params: card-name Override the default, "adau7002", card name. ++ ++ + Name: ads1015 + Info: Overlay for activation of Texas Instruments ADS1015 ADC over I2C + Load: dtoverlay=ads1015,= +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts +@@ -0,0 +1,52 @@ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "/"; ++ __overlay__ { ++ adau7002_codec: adau7002-codec { ++ #sound-dai-cells = <0>; ++ compatible = "adi,adau7002"; ++/* IOVDD-supply = <&supply>;*/ ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&sound>; ++ sound_overlay: __overlay__ { ++ compatible = "simple-audio-card"; ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,name = "adau7002"; ++ simple-audio-card,bitclock-slave = <&dailink0_slave>; ++ simple-audio-card,frame-slave = <&dailink0_slave>; ++ simple-audio-card,widgets = ++ "Microphone", "Microphone Jack"; ++ simple-audio-card,routing = ++ "PDM_DAT", "Microphone Jack"; ++ status = "okay"; ++ simple-audio-card,cpu { ++ sound-dai = <&i2s>; ++ }; ++ dailink0_slave: simple-audio-card,codec { ++ sound-dai = <&adau7002_codec>; ++ }; ++ }; ++ }; ++ ++ ++ __overrides__ { ++ card-name = <&sound_overlay>,"simple-audio-card,name"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.9/950-0137-config-Add-SND_SOC_ADAU7002-codec-module.patch b/target/linux/brcm2708/patches-4.9/950-0137-config-Add-SND_SOC_ADAU7002-codec-module.patch new file mode 100644 index 000000000000..e4ef715fb35f --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0137-config-Add-SND_SOC_ADAU7002-codec-module.patch @@ -0,0 +1,33 @@ +From 30db626576fa53cb6a0a27311baed4dd5c296c38 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 25 Jan 2017 21:17:23 +0000 +Subject: [PATCH] config: Add SND_SOC_ADAU7002 codec module + +As there is now an overlay requiring it, build the codec module. + +Signed-off-by: Phil Elwell +--- + arch/arm/configs/bcm2709_defconfig | 1 + + arch/arm/configs/bcmrpi_defconfig | 1 + + 2 files changed, 2 insertions(+) + +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -884,6 +884,7 @@ CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m + CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m + CONFIG_SND_PISOUND=m + CONFIG_SND_SOC_ADAU1701=m ++CONFIG_SND_SOC_ADAU7002=m + CONFIG_SND_SOC_AK4554=m + CONFIG_SND_SOC_WM8804_I2C=m + CONFIG_SND_SIMPLE_CARD=m +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -878,6 +878,7 @@ CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m + CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m + CONFIG_SND_PISOUND=m + CONFIG_SND_SOC_ADAU1701=m ++CONFIG_SND_SOC_ADAU7002=m + CONFIG_SND_SOC_AK4554=m + CONFIG_SND_SOC_WM8804_I2C=m + CONFIG_SND_SIMPLE_CARD=m diff --git a/target/linux/brcm2708/patches-4.9/950-0138-Add-overlay-for-mcp3008-adc-1818.patch b/target/linux/brcm2708/patches-4.9/950-0138-Add-overlay-for-mcp3008-adc-1818.patch new file mode 100644 index 000000000000..560dc6c85475 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0138-Add-overlay-for-mcp3008-adc-1818.patch @@ -0,0 +1,281 @@ +From 33800ba2a14ff23db96fe5ea6e421a731f60c52b Mon Sep 17 00:00:00 2001 +From: Scott Ellis +Date: Fri, 27 Jan 2017 06:42:42 -0500 +Subject: [PATCH] Add overlay for mcp3008 adc (#1818) + +Some example usage: + +SPI0.0 +dtparam=spi=on +dtoverlay=mcp3008:spi0-0-present + +SPI0.1 +dtparam=spi=on +dtoverlay=mcp3008:spi0-1-present + +SPI0.0 and SPI0.1 +dtparam=spi=on +dtoverlay=mcp3008:spi0-0-present,spi0-1-present + +SPI1.0 +dtparam=spi=on +dtoverlay=spi1-1cs +dtoverlay=mcp3008:spi1-0-present + +SPI1.2 +dtparam=spi=on +dtoverlay=spi1-1cs:cs0_pin=16 +dtoverlay=mcp3008:spi1-0-present + +SPI1.0 and SPI1.1 +dtoverlay=spi1-2cs +dtoverlay=mcp3008:spi1-0-present,spi1-1-present + +Changing the speed + +SPI0.0 +dtparam=spi=on +dtoverlay=mcp3008:spi0-0-present,spi0-0-speed=2000000 +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 9 ++ + arch/arm/boot/dts/overlays/mcp3008-overlay.dts | 205 +++++++++++++++++++++++++ + 3 files changed, 215 insertions(+) + create mode 100755 arch/arm/boot/dts/overlays/mcp3008-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -47,6 +47,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + mcp23s17.dtbo \ + mcp2515-can0.dtbo \ + mcp2515-can1.dtbo \ ++ mcp3008.dtbo \ + midi-uart0.dtbo \ + mmc.dtbo \ + mz61581.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -742,6 +742,15 @@ Params: oscillator Clock fr + interrupt GPIO for interrupt signal + + ++Name: mcp3008 ++Info: Configures MCP3008 A/D converters ++ For devices on spi1 or spi2, the interfaces should be enabled ++ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. ++Load: dtoverlay=mcp3008,[=] ++Params: spi--present boolean, configure device at spi, cs ++ spi--speed integer, set the spi bus speed for this device ++ ++ + Name: midi-uart0 + Info: Configures UART0 (ttyAMA0) so that a requested 38.4kbaud actually gets + 31.25kbaud, the frequency required for MIDI +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/mcp3008-overlay.dts +@@ -0,0 +1,205 @@ ++/* ++ * Device tree overlay for Microchip mcp3008 10-Bit A/D Converters ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&spidev0>; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev1>; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "spi1/spidev@0"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "spi1/spidev@1"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "spi1/spidev@2"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@5 { ++ target-path = "spi2/spidev@0"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@6 { ++ target-path = "spi2/spidev@1"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@7 { ++ target-path = "spi2/spidev@2"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@8 { ++ target = <&spi0>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_00: mcp3008@0 { ++ compatible = "mcp3008"; ++ reg = <0>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@9 { ++ target = <&spi0>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_01: mcp3008@1 { ++ compatible = "mcp3008"; ++ reg = <1>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@10 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_10: mcp3008@0 { ++ compatible = "mcp3008"; ++ reg = <0>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@11 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_11: mcp3008@1 { ++ compatible = "mcp3008"; ++ reg = <1>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@12 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_12: mcp3008@2 { ++ compatible = "mcp3008"; ++ reg = <2>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@13 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_20: mcp3008@0 { ++ compatible = "mcp3008"; ++ reg = <0>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@14 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_21: mcp3008@1 { ++ compatible = "mcp3008"; ++ reg = <1>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ fragment@15 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp3008_22: mcp3008@2 { ++ compatible = "mcp3008"; ++ reg = <2>; ++ spi-max-frequency = <1600000>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ spi0-0-present = <0>, "+0+8"; ++ spi0-1-present = <0>, "+1+9"; ++ spi1-0-present = <0>, "+2+10"; ++ spi1-1-present = <0>, "+3+11"; ++ spi1-2-present = <0>, "+4+12"; ++ spi2-0-present = <0>, "+5+13"; ++ spi2-1-present = <0>, "+6+14"; ++ spi2-2-present = <0>, "+7+15"; ++ spi0-0-speed = <&mcp3008_00>, "spi-max-frequency:0"; ++ spi0-1-speed = <&mcp3008_01>, "spi-max-frequency:0"; ++ spi1-0-speed = <&mcp3008_10>, "spi-max-frequency:0"; ++ spi1-1-speed = <&mcp3008_11>, "spi-max-frequency:0"; ++ spi1-2-speed = <&mcp3008_12>, "spi-max-frequency:0"; ++ spi2-0-speed = <&mcp3008_20>, "spi-max-frequency:0"; ++ spi2-1-speed = <&mcp3008_21>, "spi-max-frequency:0"; ++ spi2-2-speed = <&mcp3008_22>, "spi-max-frequency:0"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.9/950-0139-usb-dwc2-Avoid-suspending-if-we-re-in-gadget-mode-18.patch b/target/linux/brcm2708/patches-4.9/950-0139-usb-dwc2-Avoid-suspending-if-we-re-in-gadget-mode-18.patch new file mode 100644 index 000000000000..1ed31c2d2eb1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0139-usb-dwc2-Avoid-suspending-if-we-re-in-gadget-mode-18.patch @@ -0,0 +1,51 @@ +From 2ca9749f5b4326dad52756eaf5e7865504b4d374 Mon Sep 17 00:00:00 2001 +From: ED6E0F17 +Date: Fri, 3 Feb 2017 14:52:42 +0000 +Subject: [PATCH] usb: dwc2: Avoid suspending if we're in gadget mode (#1825) + +I've found when booting HiKey with the usb gadget cable attached +if I then try to connect via adb, I get an infinite spew of: + +dwc2 f72c0000.usb: dwc2_hsotg_ep_sethalt(ep ffffffc0790ecb18 ep1out, 0) +dwc2 f72c0000.usb: dwc2_hsotg_ep_sethalt(ep ffffffc0790eca18 ep1in, 0) + +It seems that the usb autosuspend is suspending the bus shortly +after bootup when the gadget cable is attached. So when adbd +then tries to use the device, it doesn't work and it then tries +to restart it over and over via the ep_sethalt calls (via +FUNCTIONFS_CLEAR_HALT ioctl). + +Chen Yu suggested this patch to avoid suspending if we're +in device mode, and it avoids the problem. + +Cc: Wei Xu +Cc: Guodong Xu +Cc: Amit Pundir +Cc: Rob Herring +Cc: John Youn +Cc: Douglas Anderson +Cc: Chen Yu +Cc: Kishon Vijay Abraham I +Cc: Felipe Balbi +Cc: Greg Kroah-Hartman +Cc: linux-usb@vger.kernel.org +Suggested-by: Chen Yu +Signed-off-by: John Stultz +Signed-off-by: John Youn +Signed-off-by: Felipe Balbi +--- + drivers/usb/dwc2/hcd.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/usb/dwc2/hcd.c ++++ b/drivers/usb/dwc2/hcd.c +@@ -4365,6 +4365,9 @@ static int _dwc2_hcd_suspend(struct usb_ + if (!HCD_HW_ACCESSIBLE(hcd)) + goto unlock; + ++ if (hsotg->op_state == OTG_STATE_B_PERIPHERAL) ++ goto unlock; ++ + if (!hsotg->core_params->hibernation) + goto skip_power_saving; + diff --git a/target/linux/brcm2708/patches-4.9/950-0140-gpio_mem-Remove-unnecessary-dev_info-output-1830.patch b/target/linux/brcm2708/patches-4.9/950-0140-gpio_mem-Remove-unnecessary-dev_info-output-1830.patch new file mode 100644 index 000000000000..8c2d162ccd51 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0140-gpio_mem-Remove-unnecessary-dev_info-output-1830.patch @@ -0,0 +1,22 @@ +From 5ff260778264ec512ea879cea455c86d515cc6ba Mon Sep 17 00:00:00 2001 +From: JamesH65 +Date: Mon, 6 Feb 2017 15:24:47 +0000 +Subject: [PATCH] gpio_mem: Remove unnecessary dev_info output (#1830) + +The open function was spamming syslog every time +called, so have removed call completely. +--- + drivers/char/broadcom/bcm2835-gpiomem.c | 2 -- + 1 file changed, 2 deletions(-) + +--- a/drivers/char/broadcom/bcm2835-gpiomem.c ++++ b/drivers/char/broadcom/bcm2835-gpiomem.c +@@ -76,8 +76,6 @@ static int bcm2835_gpiomem_open(struct i + int dev = iminor(inode); + int ret = 0; + +- dev_info(inst->dev, "gpiomem device opened."); +- + if (dev != DEVICE_MINOR) { + dev_err(inst->dev, "Unknown minor device: %d", dev); + ret = -ENXIO; diff --git a/target/linux/brcm2708/patches-4.9/950-0141-config-Enable-regulator-support.patch b/target/linux/brcm2708/patches-4.9/950-0141-config-Enable-regulator-support.patch new file mode 100644 index 000000000000..bcd766f4d3d4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0141-config-Enable-regulator-support.patch @@ -0,0 +1,33 @@ +From e36583656552b7827a1b9d513ec39e95efa7ce8d Mon Sep 17 00:00:00 2001 +From: Matthias Reichl +Date: Sun, 22 Jan 2017 12:49:36 +0100 +Subject: [PATCH] config: Enable regulator support + +Signed-off-by: Matthias Reichl +--- + arch/arm/configs/bcm2709_defconfig | 2 ++ + arch/arm/configs/bcmrpi_defconfig | 2 ++ + 2 files changed, 4 insertions(+) + +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -664,6 +664,8 @@ CONFIG_STMPE_SPI=y + CONFIG_MFD_ARIZONA_I2C=m + CONFIG_MFD_ARIZONA_SPI=m + CONFIG_MFD_WM5102=y ++CONFIG_REGULATOR=y ++CONFIG_REGULATOR_FIXED_VOLTAGE=m + CONFIG_MEDIA_SUPPORT=m + CONFIG_MEDIA_CAMERA_SUPPORT=y + CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -658,6 +658,8 @@ CONFIG_STMPE_SPI=y + CONFIG_MFD_ARIZONA_I2C=m + CONFIG_MFD_ARIZONA_SPI=m + CONFIG_MFD_WM5102=y ++CONFIG_REGULATOR=y ++CONFIG_REGULATOR_FIXED_VOLTAGE=m + CONFIG_MEDIA_SUPPORT=m + CONFIG_MEDIA_CAMERA_SUPPORT=y + CONFIG_MEDIA_ANALOG_TV_SUPPORT=y diff --git a/target/linux/brcm2708/patches-4.9/950-0142-BCM270x-DT-expose-3.3V-and-5V-system-rails.patch b/target/linux/brcm2708/patches-4.9/950-0142-BCM270x-DT-expose-3.3V-and-5V-system-rails.patch new file mode 100644 index 000000000000..062e6e025616 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0142-BCM270x-DT-expose-3.3V-and-5V-system-rails.patch @@ -0,0 +1,33 @@ +From 3e2cb84235e904f0c127d34705852ba7893ec9ae Mon Sep 17 00:00:00 2001 +From: Matthias Reichl +Date: Sun, 22 Jan 2017 12:49:36 +0100 +Subject: [PATCH] BCM270x DT: expose 3.3V and 5V system rails + +Signed-off-by: Matthias Reichl +--- + arch/arm/boot/dts/bcm270x.dtsi | 16 ++++++++++++++++ + 1 file changed, 16 insertions(+) + +--- a/arch/arm/boot/dts/bcm270x.dtsi ++++ b/arch/arm/boot/dts/bcm270x.dtsi +@@ -138,4 +138,20 @@ + status = "disabled"; + }; + }; ++ ++ vdd_5v0_reg: fixedregulator_5v0 { ++ compatible = "regulator-fixed"; ++ regulator-name = "5v0"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-always-on; ++ }; ++ ++ vdd_3v3_reg: fixedregulator_3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; + }; diff --git a/target/linux/brcm2708/patches-4.9/950-0143-BCM270x-DT-Consolidate-audio-card-overlays.patch b/target/linux/brcm2708/patches-4.9/950-0143-BCM270x-DT-Consolidate-audio-card-overlays.patch new file mode 100644 index 000000000000..4c123b414c15 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0143-BCM270x-DT-Consolidate-audio-card-overlays.patch @@ -0,0 +1,273 @@ +From f134380c19eb38bc276d6d86fa575821c3493c60 Mon Sep 17 00:00:00 2001 +From: Matthias Reichl +Date: Sun, 22 Jan 2017 12:49:36 +0100 +Subject: [PATCH] BCM270x DT: Consolidate audio card overlays + +Reference 3.3V / 5V system rails instead of instantiating local +regulators. + +Add missing power supply properties for codecs where these are +required according to the DT bindings docs. + +Signed-off-by: Matthias Reichl +--- + .../arm/boot/dts/overlays/adau1977-adc-overlay.dts | 19 ++-------- + .../dts/overlays/akkordion-iqdacplus-overlay.dts | 3 ++ + .../dts/overlays/hifiberry-dacplus-overlay.dts | 3 ++ + .../boot/dts/overlays/hifiberry-digi-overlay.dts | 2 + + .../dts/overlays/hifiberry-digi-pro-overlay.dts | 2 + + arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts | 3 ++ + .../boot/dts/overlays/iqaudio-dacplus-overlay.dts | 3 ++ + .../overlays/iqaudio-digi-wm8804-audio-overlay.dts | 4 +- + .../arm/boot/dts/overlays/justboom-dac-overlay.dts | 3 ++ + .../boot/dts/overlays/justboom-digi-overlay.dts | 2 + + arch/arm/boot/dts/overlays/raspidac3-overlay.dts | 4 ++ + .../overlays/rra-digidac1-wm8741-audio-overlay.dts | 44 +++------------------- + 12 files changed, 36 insertions(+), 56 deletions(-) + +--- a/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts ++++ b/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts +@@ -6,19 +6,6 @@ + compatible = "brcm,bcm2708"; + + fragment@0 { +- target = <&soc>; +- +- __overlay__ { +- codec_supply: fixedregulator@0 { +- compatible = "regulator-fixed"; +- regulator-name = "AVDD"; +- regulator-min-microvolt = <3300000>; +- regulator-max-microvolt = <3300000>; +- }; +- }; +- }; +- +- fragment@1 { + target = <&i2c>; + + __overlay__ { +@@ -30,19 +17,19 @@ + compatible = "adi,adau1977"; + reg = <0x11>; + reset-gpios = <&gpio 5 0>; +- AVDD-supply = <&codec_supply>; ++ AVDD-supply = <&vdd_3v3_reg>; + }; + }; + }; + +- fragment@2 { ++ fragment@1 { + target = <&i2s>; + __overlay__ { + status = "okay"; + }; + }; + +- fragment@3 { ++ fragment@2 { + target = <&sound>; + __overlay__ { + compatible = "adi,adau1977-adc"; +--- a/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts ++++ b/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts +@@ -23,6 +23,9 @@ + #sound-dai-cells = <0>; + compatible = "ti,pcm5122"; + reg = <0x4c>; ++ AVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; ++ CPVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +--- a/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts +@@ -34,6 +34,9 @@ + compatible = "ti,pcm5122"; + reg = <0x4d>; + clocks = <&dacpro_osc>; ++ AVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; ++ CPVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +--- a/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts +@@ -23,6 +23,8 @@ + #sound-dai-cells = <0>; + compatible = "wlf,wm8804"; + reg = <0x3b>; ++ PVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +--- a/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts +@@ -23,6 +23,8 @@ + #sound-dai-cells = <0>; + compatible = "wlf,wm8804"; + reg = <0x3b>; ++ PVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +--- a/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts ++++ b/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts +@@ -23,6 +23,9 @@ + #sound-dai-cells = <0>; + compatible = "ti,pcm5122"; + reg = <0x4c>; ++ AVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; ++ CPVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +--- a/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts ++++ b/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts +@@ -23,6 +23,9 @@ + #sound-dai-cells = <0>; + compatible = "ti,pcm5122"; + reg = <0x4c>; ++ AVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; ++ CPVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +--- a/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts +@@ -24,8 +24,8 @@ + compatible = "wlf,wm8804"; + reg = <0x3b>; + status = "okay"; +- // DVDD-supply = <®_3v3>; +- // PVDD-supply = <®_3v3>; ++ DVDD-supply = <&vdd_3v3_reg>; ++ PVDD-supply = <&vdd_3v3_reg>; + }; + }; + }; +--- a/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts ++++ b/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts +@@ -23,6 +23,9 @@ + #sound-dai-cells = <0>; + compatible = "ti,pcm5122"; + reg = <0x4d>; ++ AVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; ++ CPVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +--- a/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts +@@ -23,6 +23,8 @@ + #sound-dai-cells = <0>; + compatible = "wlf,wm8804"; + reg = <0x3b>; ++ PVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +--- a/arch/arm/boot/dts/overlays/raspidac3-overlay.dts ++++ b/arch/arm/boot/dts/overlays/raspidac3-overlay.dts +@@ -23,12 +23,16 @@ + #sound-dai-cells = <0>; + compatible = "ti,pcm5122"; + reg = <0x4c>; ++ AVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; ++ CPVDD-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + + tpa6130a2: tpa6130a2@60 { + compatible = "ti,tpa6130a2"; + reg = <0x60>; ++ Vdd-supply = <&vdd_3v3_reg>; + status = "okay"; + }; + }; +--- a/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts +@@ -6,45 +6,13 @@ + compatible = "brcm,bcm2708"; + + fragment@0 { +- target-path = "/"; +- __overlay__ { +- aliases { +- ldo0 = &ldo0; +- ldo1 = &ldo1; +- }; +- }; +- }; +- +- fragment@1 { +- target-path = "/soc"; +- __overlay__ { +- +- ldo1: ldo1 { +- compatible = "regulator-fixed"; +- regulator-name = "DC_5V"; +- regulator-min-microvolt = <5000000>; +- regulator-max-microvolt = <5000000>; +- regulator-always-on; +- }; +- +- ldo0: ldo0 { +- compatible = "regulator-fixed"; +- regulator-name = "DC_3V3"; +- regulator-min-microvolt = <3300000>; +- regulator-max-microvolt = <3300000>; +- regulator-always-on; +- }; +- }; +- }; +- +- fragment@2 { + target = <&i2s>; + __overlay__ { + status = "okay"; + }; + }; + +- fragment@3 { ++ fragment@1 { + target = <&i2c1>; + __overlay__ { + #address-cells = <1>; +@@ -56,21 +24,21 @@ + compatible = "wlf,wm8804"; + reg = <0x3b>; + status = "okay"; +- PVDD-supply = <&ldo0>; +- DVDD-supply = <&ldo0>; ++ PVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; + }; + + wm8742: wm8741@1a { + compatible = "wlf,wm8741"; + reg = <0x1a>; + status = "okay"; +- AVDD-supply = <&ldo1>; +- DVDD-supply = <&ldo0>; ++ AVDD-supply = <&vdd_5v0_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; + }; + }; + }; + +- fragment@4 { ++ fragment@2 { + target = <&sound>; + __overlay__ { + compatible = "rra,digidac1-soundcard"; diff --git a/target/linux/brcm2708/patches-4.9/950-0144-ASoC-Add-driver-for-Cirrus-Logic-Audio-Card.patch b/target/linux/brcm2708/patches-4.9/950-0144-ASoC-Add-driver-for-Cirrus-Logic-Audio-Card.patch new file mode 100644 index 000000000000..863d107541d5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0144-ASoC-Add-driver-for-Cirrus-Logic-Audio-Card.patch @@ -0,0 +1,1238 @@ +From 01c84e09a331a3b4c29c1cd5ce364c91577c7cea Mon Sep 17 00:00:00 2001 +From: Matthias Reichl +Date: Sun, 22 Jan 2017 12:49:37 +0100 +Subject: [PATCH] ASoC: Add driver for Cirrus Logic Audio Card + +Note: due to problems with deferred probing of regulators +the following softdep should be added to a modprobe.d file + +softdep arizona-spi pre: arizona-ldo1 + +Signed-off-by: Matthias Reichl +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 6 + + .../dts/overlays/rpi-cirrus-wm5102-overlay.dts | 146 +++ + sound/soc/bcm/Kconfig | 9 + + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/rpi-cirrus.c | 1003 ++++++++++++++++++++ + 6 files changed, 1167 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts + create mode 100644 sound/soc/bcm/rpi-cirrus.c + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -68,6 +68,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + qca7000.dtbo \ + raspidac3.dtbo \ + rpi-backlight.dtbo \ ++ rpi-cirrus-wm5102.dtbo \ + rpi-dac.dtbo \ + rpi-display.dtbo \ + rpi-ft5406.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -995,6 +995,12 @@ Load: dtoverlay=rpi-backlight + Params: + + ++Name: rpi-cirrus-wm5102 ++Info: Configures the Cirrus Logic Audio Card ++Load: dtoverlay=rpi-cirrus-wm5102 ++Params: ++ ++ + Name: rpi-dac + Info: Configures the RPi DAC audio card + Load: dtoverlay=rpi-dac +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts +@@ -0,0 +1,146 @@ ++// Definitions for the Cirrus Logic Audio Card ++/dts-v1/; ++/plugin/; ++#include ++#include ++#include ++ ++/ { ++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; ++ ++ fragment@0 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ wlf_pins: wlf_pins { ++ brcm,pins = <17 22 27 8>; ++ brcm,function = < ++ BCM2835_FSEL_GPIO_OUT ++ BCM2835_FSEL_GPIO_OUT ++ BCM2835_FSEL_GPIO_IN ++ BCM2835_FSEL_GPIO_OUT ++ >; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "/"; ++ __overlay__ { ++ rpi_cirrus_reg_1v8: rpi_cirrus_reg_1v8 { ++ compatible = "regulator-fixed"; ++ regulator-name = "RPi-Cirrus 1v8"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-always-on; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&spi0>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ spidev@0{ ++ status = "disabled"; ++ }; ++ ++ spidev@1{ ++ status = "disabled"; ++ }; ++ ++ wm5102@1{ ++ compatible = "wlf,wm5102"; ++ reg = <1>; ++ ++ spi-max-frequency = <500000>; ++ ++ interrupt-parent = <&gpio>; ++ interrupts = <27 8>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ LDOVDD-supply = <&rpi_cirrus_reg_1v8>; ++ AVDD-supply = <&rpi_cirrus_reg_1v8>; ++ DBVDD1-supply = <&rpi_cirrus_reg_1v8>; ++ DBVDD2-supply = <&vdd_3v3_reg>; ++ DBVDD3-supply = <&vdd_3v3_reg>; ++ CPVDD-supply = <&rpi_cirrus_reg_1v8>; ++ SPKVDDL-supply = <&vdd_5v0_reg>; ++ SPKVDDR-supply = <&vdd_5v0_reg>; ++ DCVDD-supply = <&arizona_ldo1>; ++ ++ wlf,reset = <&gpio 17 GPIO_ACTIVE_HIGH>; ++ wlf,ldoena = <&gpio 22 GPIO_ACTIVE_HIGH>; ++ wlf,gpio-defaults = < ++ ARIZONA_GP_DEFAULT ++ ARIZONA_GP_DEFAULT ++ ARIZONA_GP_DEFAULT ++ ARIZONA_GP_DEFAULT ++ ARIZONA_GP_DEFAULT ++ >; ++ wlf,micd-configs = <0 1 0>; ++ wlf,dmic-ref = < ++ ARIZONA_DMIC_MICVDD ++ ARIZONA_DMIC_MICBIAS2 ++ ARIZONA_DMIC_MICVDD ++ ARIZONA_DMIC_MICVDD ++ >; ++ wlf,inmode = < ++ ARIZONA_INMODE_DIFF ++ ARIZONA_INMODE_DMIC ++ ARIZONA_INMODE_SE ++ ARIZONA_INMODE_DIFF ++ >; ++ status = "okay"; ++ ++ arizona_ldo1: ldo1 { ++ regulator-name = "LDO1"; ++ // default constraints as in ++ // arizona-ldo1.c ++ regulator-min-microvolt = <1200000>; ++ regulator-max-microvolt = <1800000>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&i2c1>; ++ __overlay__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ wm8804@3b { ++ compatible = "wlf,wm8804"; ++ reg = <0x3b>; ++ status = "okay"; ++ PVDD-supply = <&vdd_3v3_reg>; ++ DVDD-supply = <&vdd_3v3_reg>; ++ wlf,reset-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ }; ++ ++ fragment@5 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "wlf,rpi-cirrus"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -45,6 +45,15 @@ config SND_BCM2708_SOC_HIFIBERRY_AMP + help + Say Y or M if you want to add support for the HifiBerry Amp amplifier board. + ++config SND_BCM2708_SOC_RPI_CIRRUS ++ tristate "Support for Cirrus Logic Audio Card" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_WM5102 ++ select SND_SOC_WM8804 ++ help ++ Say Y or M if you want to add support for the Wolfson and ++ Cirrus Logic audio cards. ++ + config SND_BCM2708_SOC_RPI_DAC + tristate "Support for RPi-DAC" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -16,6 +16,7 @@ snd-soc-hifiberry-dacplus-objs := hifibe + snd-soc-hifiberry-digi-objs := hifiberry_digi.o + snd-soc-justboom-dac-objs := justboom-dac.o + snd-soc-justboom-digi-objs := justboom-digi.o ++snd-soc-rpi-cirrus-objs := rpi-cirrus.o + snd-soc-rpi-dac-objs := rpi-dac.o + snd-soc-rpi-proto-objs := rpi-proto.o + snd-soc-iqaudio-dac-objs := iqaudio-dac.o +@@ -34,6 +35,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_D + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o + obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC) += snd-soc-justboom-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI) += snd-soc-justboom-digi.o ++obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS) += snd-soc-rpi-cirrus.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o + obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o + obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o +--- /dev/null ++++ b/sound/soc/bcm/rpi-cirrus.c +@@ -0,0 +1,1003 @@ ++/* ++ * ASoC machine driver for Cirrus Logic Audio Card ++ * (with WM5102 and WM8804 codecs) ++ * ++ * Copyright 2015-2017 Matthias Reichl ++ * ++ * Based on rpi-cirrus-sound-pi driver (c) Wolfson / Cirrus Logic Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include "../codecs/wm5102.h" ++#include "../codecs/wm8804.h" ++ ++#define WM8804_CLKOUT_HZ 12000000 ++ ++#define RPI_CIRRUS_DEFAULT_RATE 44100 ++#define WM5102_MAX_SYSCLK_1 49152000 /* max sysclk for 4K family */ ++#define WM5102_MAX_SYSCLK_2 45158400 /* max sysclk for 11.025K family */ ++ ++static inline unsigned int calc_sysclk(unsigned int rate) ++{ ++ return (rate % 4000) ? WM5102_MAX_SYSCLK_2 : WM5102_MAX_SYSCLK_1; ++} ++ ++enum { ++ DAI_WM5102 = 0, ++ DAI_WM8804, ++}; ++ ++struct rpi_cirrus_priv { ++ /* mutex for synchronzing FLL1 access with DAPM */ ++ struct mutex lock; ++ unsigned int card_rate; ++ int sync_path_enable; ++ int fll1_freq; /* negative means RefClock in spdif rx case */ ++ ++ /* track hw params/free for substreams */ ++ unsigned int params_set; ++ unsigned int min_rate_idx, max_rate_idx; ++ unsigned char iec958_status[4]; ++}; ++ ++/* helper functions */ ++static inline struct snd_soc_pcm_runtime *get_wm5102_runtime( ++ struct snd_soc_card *card) { ++ return snd_soc_get_pcm_runtime(card, card->dai_link[DAI_WM5102].name); ++} ++ ++static inline struct snd_soc_pcm_runtime *get_wm8804_runtime( ++ struct snd_soc_card *card) { ++ return snd_soc_get_pcm_runtime(card, card->dai_link[DAI_WM8804].name); ++} ++ ++ ++struct rate_info { ++ unsigned int value; ++ char *text; ++}; ++ ++static struct rate_info min_rates[] = { ++ { 0, "off"}, ++ { 32000, "32kHz"}, ++ { 44100, "44.1kHz"} ++}; ++ ++#define NUM_MIN_RATES ARRAY_SIZE(min_rates) ++ ++static int rpi_cirrus_min_rate_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; ++ uinfo->count = 1; ++ uinfo->value.enumerated.items = NUM_MIN_RATES; ++ ++ if (uinfo->value.enumerated.item >= NUM_MIN_RATES) ++ uinfo->value.enumerated.item = NUM_MIN_RATES - 1; ++ strcpy(uinfo->value.enumerated.name, ++ min_rates[uinfo->value.enumerated.item].text); ++ return 0; ++} ++ ++static int rpi_cirrus_min_rate_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ ++ ucontrol->value.enumerated.item[0] = priv->min_rate_idx; ++ return 0; ++} ++ ++static int rpi_cirrus_min_rate_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ int changed = 0; ++ ++ if (priv->min_rate_idx != ucontrol->value.enumerated.item[0]) { ++ changed = 1; ++ priv->min_rate_idx = ucontrol->value.enumerated.item[0]; ++ } ++ ++ return changed; ++} ++ ++static struct rate_info max_rates[] = { ++ { 0, "off"}, ++ { 48000, "48kHz"}, ++ { 96000, "96kHz"} ++}; ++ ++#define NUM_MAX_RATES ARRAY_SIZE(max_rates) ++ ++static int rpi_cirrus_max_rate_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; ++ uinfo->count = 1; ++ uinfo->value.enumerated.items = NUM_MAX_RATES; ++ if (uinfo->value.enumerated.item >= NUM_MAX_RATES) ++ uinfo->value.enumerated.item = NUM_MAX_RATES - 1; ++ strcpy(uinfo->value.enumerated.name, ++ max_rates[uinfo->value.enumerated.item].text); ++ return 0; ++} ++ ++static int rpi_cirrus_max_rate_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ ++ ucontrol->value.enumerated.item[0] = priv->max_rate_idx; ++ return 0; ++} ++ ++static int rpi_cirrus_max_rate_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ int changed = 0; ++ ++ if (priv->max_rate_idx != ucontrol->value.enumerated.item[0]) { ++ changed = 1; ++ priv->max_rate_idx = ucontrol->value.enumerated.item[0]; ++ } ++ ++ return changed; ++} ++ ++static int rpi_cirrus_spdif_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; ++ uinfo->count = 1; ++ return 0; ++} ++ ++static int rpi_cirrus_spdif_playback_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ int i; ++ ++ for (i = 0; i < 4; i++) ++ ucontrol->value.iec958.status[i] = priv->iec958_status[i]; ++ ++ return 0; ++} ++ ++static int rpi_cirrus_spdif_playback_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct snd_soc_codec *wm8804_codec = get_wm8804_runtime(card)->codec; ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ unsigned char *stat = priv->iec958_status; ++ unsigned char *ctrl_stat = ucontrol->value.iec958.status; ++ unsigned int mask; ++ int i, changed = 0; ++ ++ for (i = 0; i < 4; i++) { ++ mask = (i == 3) ? 0x3f : 0xff; ++ if ((ctrl_stat[i] & mask) != (stat[i] & mask)) { ++ changed = 1; ++ stat[i] = ctrl_stat[i] & mask; ++ snd_soc_update_bits(wm8804_codec, ++ WM8804_SPDTX1 + i, mask, stat[i]); ++ } ++ } ++ ++ return changed; ++} ++ ++static int rpi_cirrus_spdif_mask_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ ucontrol->value.iec958.status[0] = 0xff; ++ ucontrol->value.iec958.status[1] = 0xff; ++ ucontrol->value.iec958.status[2] = 0xff; ++ ucontrol->value.iec958.status[3] = 0x3f; ++ ++ return 0; ++} ++ ++static int rpi_cirrus_spdif_capture_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct snd_soc_codec *wm8804_codec = get_wm8804_runtime(card)->codec; ++ unsigned int mask; ++ int i; ++ ++ for (i = 0; i < 4; i++) { ++ mask = (i == 3) ? 0x3f : 0xff; ++ ucontrol->value.iec958.status[i] = ++ snd_soc_read(wm8804_codec, WM8804_RXCHAN1 + i) & mask; ++ } ++ ++ return 0; ++} ++ ++#define SPDIF_FLAG_CTRL(desc, reg, bit, invert) \ ++{ \ ++ .access = SNDRV_CTL_ELEM_ACCESS_READ \ ++ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \ ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ ++ .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE) \ ++ desc " Flag", \ ++ .info = snd_ctl_boolean_mono_info, \ ++ .get = rpi_cirrus_spdif_status_flag_get, \ ++ .private_value = \ ++ (bit) | ((reg) << 8) | ((invert) << 16) \ ++} ++ ++static int rpi_cirrus_spdif_status_flag_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct snd_soc_codec *wm8804_codec = get_wm8804_runtime(card)->codec; ++ ++ unsigned int bit = kcontrol->private_value & 0xff; ++ unsigned int reg = (kcontrol->private_value >> 8) & 0xff; ++ unsigned int invert = (kcontrol->private_value >> 16) & 0xff; ++ ++ bool flag = snd_soc_read(wm8804_codec, reg) & (1 << bit); ++ ++ ucontrol->value.integer.value[0] = invert ? !flag : flag; ++ ++ return 0; ++} ++ ++static const char * const recovered_frequency_texts[] = { ++ "176.4/192 kHz", ++ "88.2/96 kHz", ++ "44.1/48 kHz", ++ "32 kHz" ++}; ++ ++#define NUM_RECOVERED_FREQUENCIES \ ++ ARRAY_SIZE(recovered_frequency_texts) ++ ++static int rpi_cirrus_recovered_frequency_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; ++ uinfo->count = 1; ++ uinfo->value.enumerated.items = NUM_RECOVERED_FREQUENCIES; ++ if (uinfo->value.enumerated.item >= NUM_RECOVERED_FREQUENCIES) ++ uinfo->value.enumerated.item = NUM_RECOVERED_FREQUENCIES - 1; ++ strcpy(uinfo->value.enumerated.name, ++ recovered_frequency_texts[uinfo->value.enumerated.item]); ++ return 0; ++} ++ ++static int rpi_cirrus_recovered_frequency_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); ++ struct snd_soc_codec *wm8804_codec = get_wm8804_runtime(card)->codec; ++ ++ ucontrol->value.enumerated.item[0] = ++ (snd_soc_read(wm8804_codec, WM8804_SPDSTAT) >> 4) & 0x03; ++ return 0; ++} ++ ++static const struct snd_kcontrol_new rpi_cirrus_controls[] = { ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "Min Sample Rate", ++ .info = rpi_cirrus_min_rate_info, ++ .get = rpi_cirrus_min_rate_get, ++ .put = rpi_cirrus_min_rate_put, ++ }, ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "Max Sample Rate", ++ .info = rpi_cirrus_max_rate_info, ++ .get = rpi_cirrus_max_rate_get, ++ .put = rpi_cirrus_max_rate_put, ++ }, ++ { ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), ++ .info = rpi_cirrus_spdif_info, ++ .get = rpi_cirrus_spdif_playback_get, ++ .put = rpi_cirrus_spdif_playback_put, ++ }, ++ { ++ .access = SNDRV_CTL_ELEM_ACCESS_READ ++ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, DEFAULT), ++ .info = rpi_cirrus_spdif_info, ++ .get = rpi_cirrus_spdif_capture_get, ++ }, ++ { ++ .access = SNDRV_CTL_ELEM_ACCESS_READ, ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK), ++ .info = rpi_cirrus_spdif_info, ++ .get = rpi_cirrus_spdif_mask_get, ++ }, ++ { ++ .access = SNDRV_CTL_ELEM_ACCESS_READ ++ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE) ++ "Recovered Frequency", ++ .info = rpi_cirrus_recovered_frequency_info, ++ .get = rpi_cirrus_recovered_frequency_get, ++ }, ++ SPDIF_FLAG_CTRL("Audio", WM8804_SPDSTAT, 0, 1), ++ SPDIF_FLAG_CTRL("Non-PCM", WM8804_SPDSTAT, 1, 0), ++ SPDIF_FLAG_CTRL("Copyright", WM8804_SPDSTAT, 2, 1), ++ SPDIF_FLAG_CTRL("De-Emphasis", WM8804_SPDSTAT, 3, 0), ++ SPDIF_FLAG_CTRL("Lock", WM8804_SPDSTAT, 6, 1), ++ SPDIF_FLAG_CTRL("Invalid", WM8804_INTSTAT, 1, 0), ++ SPDIF_FLAG_CTRL("TransErr", WM8804_INTSTAT, 3, 0), ++}; ++ ++static const char * const linein_micbias_texts[] = { ++ "off", "on", ++}; ++ ++static SOC_ENUM_SINGLE_VIRT_DECL(linein_micbias_enum, ++ linein_micbias_texts); ++ ++static const struct snd_kcontrol_new linein_micbias_mux = ++ SOC_DAPM_ENUM("Route", linein_micbias_enum); ++ ++static int rpi_cirrus_spdif_rx_enable_event(struct snd_soc_dapm_widget *w, ++ struct snd_kcontrol *kcontrol, int event); ++ ++const struct snd_soc_dapm_widget rpi_cirrus_dapm_widgets[] = { ++ SND_SOC_DAPM_MIC("DMIC", NULL), ++ SND_SOC_DAPM_MIC("Headset Mic", NULL), ++ SND_SOC_DAPM_INPUT("Line Input"), ++ SND_SOC_DAPM_MIC("Line Input with Micbias", NULL), ++ SND_SOC_DAPM_MUX("Line Input Micbias", SND_SOC_NOPM, 0, 0, ++ &linein_micbias_mux), ++ SND_SOC_DAPM_INPUT("dummy SPDIF in"), ++ SND_SOC_DAPM_PGA_E("dummy SPDIFRX", SND_SOC_NOPM, 0, 0, NULL, 0, ++ rpi_cirrus_spdif_rx_enable_event, ++ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), ++ SND_SOC_DAPM_INPUT("Dummy Input"), ++ SND_SOC_DAPM_OUTPUT("Dummy Output"), ++}; ++ ++const struct snd_soc_dapm_route rpi_cirrus_dapm_routes[] = { ++ { "IN1L", NULL, "Headset Mic" }, ++ { "IN1R", NULL, "Headset Mic" }, ++ { "Headset Mic", NULL, "MICBIAS1" }, ++ ++ { "IN2L", NULL, "DMIC" }, ++ { "IN2R", NULL, "DMIC" }, ++ { "DMIC", NULL, "MICBIAS2" }, ++ ++ { "IN3L", NULL, "Line Input Micbias" }, ++ { "IN3R", NULL, "Line Input Micbias" }, ++ ++ { "Line Input Micbias", "off", "Line Input" }, ++ { "Line Input Micbias", "on", "Line Input with Micbias" }, ++ ++ /* Make sure MICVDD is enabled, otherwise we get noise */ ++ { "Line Input", NULL, "MICVDD" }, ++ { "Line Input with Micbias", NULL, "MICBIAS3" }, ++ ++ /* Dummy routes to check whether SPDIF RX is enabled or not */ ++ {"dummy SPDIFRX", NULL, "dummy SPDIF in"}, ++ {"AIFTX", NULL, "dummy SPDIFRX"}, ++ ++ /* ++ * Dummy routes to keep wm5102 from staying off on ++ * playback/capture if all mixers are off. ++ */ ++ { "Dummy Output", NULL, "AIF1RX1" }, ++ { "Dummy Output", NULL, "AIF1RX2" }, ++ { "AIF1TX1", NULL, "Dummy Input" }, ++ { "AIF1TX2", NULL, "Dummy Input" }, ++}; ++ ++static int rpi_cirrus_clear_flls(struct snd_soc_card *card, ++ struct snd_soc_codec *wm5102_codec) { ++ ++ int ret1, ret2; ++ ++ ret1 = snd_soc_codec_set_pll(wm5102_codec, ++ WM5102_FLL1, ARIZONA_FLL_SRC_NONE, 0, 0); ++ ret2 = snd_soc_codec_set_pll(wm5102_codec, ++ WM5102_FLL1_REFCLK, ARIZONA_FLL_SRC_NONE, 0, 0); ++ ++ if (ret1) { ++ dev_warn(card->dev, ++ "setting FLL1 to zero failed: %d\n", ret1); ++ return ret1; ++ } ++ if (ret2) { ++ dev_warn(card->dev, ++ "setting FLL1_REFCLK to zero failed: %d\n", ret2); ++ return ret2; ++ } ++ return 0; ++} ++ ++static int rpi_cirrus_set_fll(struct snd_soc_card *card, ++ struct snd_soc_codec *wm5102_codec, unsigned int clk_freq) ++{ ++ int ret = snd_soc_codec_set_pll(wm5102_codec, ++ WM5102_FLL1, ++ ARIZONA_CLK_SRC_MCLK1, ++ WM8804_CLKOUT_HZ, ++ clk_freq); ++ if (ret) ++ dev_err(card->dev, "Failed to set FLL1 to %d: %d\n", ++ clk_freq, ret); ++ ++ usleep_range(1000, 2000); ++ return ret; ++} ++ ++static int rpi_cirrus_set_fll_refclk(struct snd_soc_card *card, ++ struct snd_soc_codec *wm5102_codec, ++ unsigned int clk_freq, unsigned int aif2_freq) ++{ ++ int ret = snd_soc_codec_set_pll(wm5102_codec, ++ WM5102_FLL1_REFCLK, ++ ARIZONA_CLK_SRC_MCLK1, ++ WM8804_CLKOUT_HZ, ++ clk_freq); ++ if (ret) { ++ dev_err(card->dev, ++ "Failed to set FLL1_REFCLK to %d: %d\n", ++ clk_freq, ret); ++ return ret; ++ } ++ ++ ret = snd_soc_codec_set_pll(wm5102_codec, ++ WM5102_FLL1, ++ ARIZONA_CLK_SRC_AIF2BCLK, ++ aif2_freq, clk_freq); ++ if (ret) ++ dev_err(card->dev, ++ "Failed to set FLL1 with Sync Clock %d to %d: %d\n", ++ aif2_freq, clk_freq, ret); ++ ++ usleep_range(1000, 2000); ++ return ret; ++} ++ ++static int rpi_cirrus_spdif_rx_enable_event(struct snd_soc_dapm_widget *w, ++ struct snd_kcontrol *kcontrol, int event) ++{ ++ struct snd_soc_card *card = w->dapm->card; ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ struct snd_soc_codec *wm5102_codec = get_wm5102_runtime(card)->codec; ++ ++ unsigned int clk_freq, aif2_freq; ++ int ret = 0; ++ ++ switch (event) { ++ case SND_SOC_DAPM_POST_PMU: ++ mutex_lock(&priv->lock); ++ ++ /* Enable sync path in case of SPDIF capture use case */ ++ ++ clk_freq = calc_sysclk(priv->card_rate); ++ aif2_freq = 64 * priv->card_rate; ++ ++ dev_dbg(card->dev, ++ "spdif_rx: changing FLL1 to use Ref Clock clk: %d spdif: %d\n", ++ clk_freq, aif2_freq); ++ ++ ret = rpi_cirrus_clear_flls(card, wm5102_codec); ++ if (ret) { ++ dev_err(card->dev, "spdif_rx: failed to clear FLLs\n"); ++ goto out; ++ } ++ ++ ret = rpi_cirrus_set_fll_refclk(card, wm5102_codec, ++ clk_freq, aif2_freq); ++ ++ if (ret) { ++ dev_err(card->dev, "spdif_rx: failed to set FLLs\n"); ++ goto out; ++ } ++ ++ /* set to negative to indicate we're doing spdif rx */ ++ priv->fll1_freq = -clk_freq; ++ priv->sync_path_enable = 1; ++ break; ++ ++ case SND_SOC_DAPM_POST_PMD: ++ mutex_lock(&priv->lock); ++ priv->sync_path_enable = 0; ++ break; ++ ++ default: ++ return 0; ++ } ++ ++out: ++ mutex_unlock(&priv->lock); ++ return ret; ++} ++ ++static int rpi_cirrus_set_bias_level(struct snd_soc_card *card, ++ struct snd_soc_dapm_context *dapm, ++ enum snd_soc_bias_level level) ++{ ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ struct snd_soc_pcm_runtime *wm5102_runtime = get_wm5102_runtime(card); ++ struct snd_soc_codec *wm5102_codec = wm5102_runtime->codec; ++ ++ int ret = 0; ++ unsigned int clk_freq; ++ ++ if (dapm->dev != wm5102_runtime->codec_dai->dev) ++ return 0; ++ ++ switch (level) { ++ case SND_SOC_BIAS_PREPARE: ++ if (dapm->bias_level == SND_SOC_BIAS_ON) ++ break; ++ ++ mutex_lock(&priv->lock); ++ ++ if (!priv->sync_path_enable) { ++ clk_freq = calc_sysclk(priv->card_rate); ++ ++ dev_dbg(card->dev, ++ "set_bias: changing FLL1 from %d to %d\n", ++ priv->fll1_freq, clk_freq); ++ ++ ret = rpi_cirrus_set_fll(card, wm5102_codec, clk_freq); ++ if (ret) ++ dev_err(card->dev, ++ "set_bias: Failed to set FLL1\n"); ++ else ++ priv->fll1_freq = clk_freq; ++ } ++ mutex_unlock(&priv->lock); ++ break; ++ default: ++ break; ++ } ++ ++ return ret; ++} ++ ++static int rpi_cirrus_set_bias_level_post(struct snd_soc_card *card, ++ struct snd_soc_dapm_context *dapm, ++ enum snd_soc_bias_level level) ++{ ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ struct snd_soc_pcm_runtime *wm5102_runtime = get_wm5102_runtime(card); ++ struct snd_soc_codec *wm5102_codec = wm5102_runtime->codec; ++ ++ if (dapm->dev != wm5102_runtime->codec_dai->dev) ++ return 0; ++ ++ switch (level) { ++ case SND_SOC_BIAS_STANDBY: ++ mutex_lock(&priv->lock); ++ ++ dev_dbg(card->dev, ++ "set_bias_post: changing FLL1 from %d to off\n", ++ priv->fll1_freq); ++ ++ if (rpi_cirrus_clear_flls(card, wm5102_codec)) ++ dev_err(card->dev, ++ "set_bias_post: failed to clear FLLs\n"); ++ else ++ priv->fll1_freq = 0; ++ ++ mutex_unlock(&priv->lock); ++ ++ break; ++ default: ++ break; ++ } ++ ++ return 0; ++} ++ ++static int rpi_cirrus_set_wm8804_pll(struct snd_soc_card *card, ++ struct snd_soc_dai *wm8804_dai, unsigned int rate) ++{ ++ int ret; ++ ++ /* use 256fs */ ++ unsigned int clk_freq = rate * 256; ++ ++ ret = snd_soc_dai_set_pll(wm8804_dai, 0, 0, ++ WM8804_CLKOUT_HZ, clk_freq); ++ if (ret) { ++ dev_err(card->dev, ++ "Failed to set WM8804 PLL to %d: %d\n", clk_freq, ret); ++ return ret; ++ } ++ ++ /* Set MCLK as PLL Output */ ++ ret = snd_soc_dai_set_sysclk(wm8804_dai, ++ WM8804_TX_CLKSRC_PLL, clk_freq, 0); ++ if (ret) { ++ dev_err(card->dev, ++ "Failed to set MCLK as PLL Output: %d\n", ret); ++ return ret; ++ } ++ ++ return ret; ++} ++ ++static int rpi_cirrus_startup(struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_card *card = rtd->card; ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ unsigned int min_rate = min_rates[priv->min_rate_idx].value; ++ unsigned int max_rate = max_rates[priv->max_rate_idx].value; ++ ++ if (min_rate || max_rate) { ++ if (max_rate == 0) ++ max_rate = UINT_MAX; ++ ++ dev_dbg(card->dev, ++ "startup: limiting rate to %u-%u\n", ++ min_rate, max_rate); ++ ++ snd_pcm_hw_constraint_minmax(substream->runtime, ++ SNDRV_PCM_HW_PARAM_RATE, min_rate, max_rate); ++ } ++ ++ return 0; ++} ++ ++static struct snd_soc_pcm_stream rpi_cirrus_dai_link2_params = { ++ .formats = SNDRV_PCM_FMTBIT_S24_LE, ++ .channels_min = 2, ++ .channels_max = 2, ++ .rate_min = RPI_CIRRUS_DEFAULT_RATE, ++ .rate_max = RPI_CIRRUS_DEFAULT_RATE, ++}; ++ ++static int rpi_cirrus_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_card *card = rtd->card; ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ struct snd_soc_dai *bcm_i2s_dai = rtd->cpu_dai; ++ struct snd_soc_codec *wm5102_codec = rtd->codec; ++ struct snd_soc_dai *wm8804_dai = get_wm8804_runtime(card)->codec_dai; ++ ++ int ret; ++ ++ unsigned int width = snd_pcm_format_physical_width( ++ params_format(params)); ++ unsigned int rate = params_rate(params); ++ unsigned int clk_freq = calc_sysclk(rate); ++ ++ mutex_lock(&priv->lock); ++ ++ dev_dbg(card->dev, "hw_params: setting rate to %d\n", rate); ++ ++ ret = snd_soc_dai_set_bclk_ratio(bcm_i2s_dai, 2 * width); ++ if (ret) { ++ dev_err(card->dev, "set_bclk_ratio failed: %d\n", ret); ++ goto out; ++ } ++ ++ ret = snd_soc_dai_set_tdm_slot(rtd->codec_dai, 0x03, 0x03, 2, width); ++ if (ret) { ++ dev_err(card->dev, "set_tdm_slot failed: %d\n", ret); ++ goto out; ++ } ++ ++ /* WM8804 supports sample rates from 32k only */ ++ if (rate >= 32000) { ++ ret = rpi_cirrus_set_wm8804_pll(card, wm8804_dai, rate); ++ if (ret) ++ goto out; ++ } ++ ++ ret = snd_soc_codec_set_sysclk(wm5102_codec, ++ ARIZONA_CLK_SYSCLK, ++ ARIZONA_CLK_SRC_FLL1, ++ clk_freq, ++ SND_SOC_CLOCK_IN); ++ if (ret) { ++ dev_err(card->dev, "Failed to set SYSCLK: %d\n", ret); ++ goto out; ++ } ++ ++ if ((priv->fll1_freq > 0) && (priv->fll1_freq != clk_freq)) { ++ dev_dbg(card->dev, ++ "hw_params: changing FLL1 from %d to %d\n", ++ priv->fll1_freq, clk_freq); ++ ++ if (rpi_cirrus_clear_flls(card, wm5102_codec)) { ++ dev_err(card->dev, "hw_params: failed to clear FLLs\n"); ++ goto out; ++ } ++ ++ if (rpi_cirrus_set_fll(card, wm5102_codec, clk_freq)) { ++ dev_err(card->dev, "hw_params: failed to set FLL\n"); ++ goto out; ++ } ++ ++ priv->fll1_freq = clk_freq; ++ } ++ ++ priv->card_rate = rate; ++ rpi_cirrus_dai_link2_params.rate_min = rate; ++ rpi_cirrus_dai_link2_params.rate_max = rate; ++ ++ priv->params_set |= 1 << substream->stream; ++ ++out: ++ mutex_unlock(&priv->lock); ++ ++ return ret; ++} ++ ++static int rpi_cirrus_hw_free(struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_card *card = rtd->card; ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ struct snd_soc_codec *wm5102_codec = rtd->codec; ++ int ret; ++ unsigned int old_params_set = priv->params_set; ++ ++ priv->params_set &= ~(1 << substream->stream); ++ ++ /* disable sysclk if this was the last open stream */ ++ if (priv->params_set == 0 && old_params_set) { ++ dev_dbg(card->dev, ++ "hw_free: Setting SYSCLK to Zero\n"); ++ ++ ret = snd_soc_codec_set_sysclk(wm5102_codec, ++ ARIZONA_CLK_SYSCLK, ++ ARIZONA_CLK_SRC_FLL1, ++ 0, ++ SND_SOC_CLOCK_IN); ++ if (ret) ++ dev_err(card->dev, ++ "hw_free: Failed to set SYSCLK to Zero: %d\n", ++ ret); ++ } ++ return 0; ++} ++ ++static int rpi_cirrus_init_wm5102(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_codec *codec = rtd->codec; ++ int ret; ++ ++ /* no 32kHz input, derive it from sysclk if needed */ ++ snd_soc_update_bits(codec, ++ ARIZONA_CLOCK_32K_1, ARIZONA_CLK_32K_SRC_MASK, 2); ++ ++ if (rpi_cirrus_clear_flls(rtd->card, codec)) ++ dev_warn(rtd->card->dev, ++ "init_wm5102: failed to clear FLLs\n"); ++ ++ ret = snd_soc_codec_set_sysclk(codec, ++ ARIZONA_CLK_SYSCLK, ARIZONA_CLK_SRC_FLL1, ++ 0, SND_SOC_CLOCK_IN); ++ if (ret) { ++ dev_err(rtd->card->dev, ++ "Failed to set SYSCLK to Zero: %d\n", ret); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int rpi_cirrus_init_wm8804(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_codec *codec = rtd->codec; ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ struct snd_soc_card *card = rtd->card; ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ unsigned int mask; ++ int i, ret; ++ ++ for (i = 0; i < 4; i++) { ++ mask = (i == 3) ? 0x3f : 0xff; ++ priv->iec958_status[i] = ++ snd_soc_read(codec, WM8804_SPDTX1 + i) & mask; ++ } ++ ++ /* Setup for 256fs */ ++ ret = snd_soc_dai_set_clkdiv(codec_dai, ++ WM8804_MCLK_DIV, WM8804_MCLKDIV_256FS); ++ if (ret) { ++ dev_err(card->dev, ++ "init_wm8804: Failed to set MCLK_DIV to 256fs: %d\n", ++ ret); ++ return ret; ++ } ++ ++ /* Output OSC on CLKOUT */ ++ ret = snd_soc_dai_set_sysclk(codec_dai, ++ WM8804_CLKOUT_SRC_OSCCLK, WM8804_CLKOUT_HZ, 0); ++ if (ret) ++ dev_err(card->dev, ++ "init_wm8804: Failed to set CLKOUT as OSC Frequency: %d\n", ++ ret); ++ ++ /* Init PLL with default samplerate */ ++ ret = rpi_cirrus_set_wm8804_pll(card, codec_dai, ++ RPI_CIRRUS_DEFAULT_RATE); ++ if (ret) ++ dev_err(card->dev, ++ "init_wm8804: Failed to setup PLL for %dHz: %d\n", ++ RPI_CIRRUS_DEFAULT_RATE, ret); ++ ++ return ret; ++} ++ ++static struct snd_soc_ops rpi_cirrus_ops = { ++ .startup = rpi_cirrus_startup, ++ .hw_params = rpi_cirrus_hw_params, ++ .hw_free = rpi_cirrus_hw_free, ++}; ++ ++static struct snd_soc_dai_link rpi_cirrus_dai[] = { ++ [DAI_WM5102] = { ++ .name = "WM5102", ++ .stream_name = "WM5102 AiFi", ++ .codec_dai_name = "wm5102-aif1", ++ .codec_name = "wm5102-codec", ++ .dai_fmt = SND_SOC_DAIFMT_I2S ++ | SND_SOC_DAIFMT_NB_NF ++ | SND_SOC_DAIFMT_CBM_CFM, ++ .ops = &rpi_cirrus_ops, ++ .init = rpi_cirrus_init_wm5102, ++ }, ++ [DAI_WM8804] = { ++ .name = "WM5102 SPDIF", ++ .stream_name = "SPDIF Tx/Rx", ++ .cpu_dai_name = "wm5102-aif2", ++ .codec_dai_name = "wm8804-spdif", ++ .codec_name = "wm8804.1-003b", ++ .dai_fmt = SND_SOC_DAIFMT_I2S ++ | SND_SOC_DAIFMT_NB_NF ++ | SND_SOC_DAIFMT_CBM_CFM, ++ .ignore_suspend = 1, ++ .params = &rpi_cirrus_dai_link2_params, ++ .init = rpi_cirrus_init_wm8804, ++ }, ++}; ++ ++ ++static int rpi_cirrus_late_probe(struct snd_soc_card *card) ++{ ++ struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card); ++ struct snd_soc_pcm_runtime *wm5102_runtime = get_wm5102_runtime(card); ++ struct snd_soc_pcm_runtime *wm8804_runtime = get_wm8804_runtime(card); ++ int ret; ++ ++ dev_dbg(card->dev, "iec958_bits: %02x %02x %02x %02x\n", ++ priv->iec958_status[0], ++ priv->iec958_status[1], ++ priv->iec958_status[2], ++ priv->iec958_status[3]); ++ ++ ret = snd_soc_dai_set_sysclk( ++ wm5102_runtime->codec_dai, ARIZONA_CLK_SYSCLK, 0, 0); ++ if (ret) { ++ dev_err(card->dev, ++ "Failed to set WM5102 codec dai clk domain: %d\n", ret); ++ return ret; ++ } ++ ++ ret = snd_soc_dai_set_sysclk( ++ wm8804_runtime->cpu_dai, ARIZONA_CLK_SYSCLK, 0, 0); ++ if (ret) ++ dev_err(card->dev, ++ "Failed to set WM8804 codec dai clk domain: %d\n", ret); ++ ++ return ret; ++} ++ ++/* audio machine driver */ ++static struct snd_soc_card rpi_cirrus_card = { ++ .name = "RPi-Cirrus", ++ .driver_name = "RPiCirrus", ++ .owner = THIS_MODULE, ++ .dai_link = rpi_cirrus_dai, ++ .num_links = ARRAY_SIZE(rpi_cirrus_dai), ++ .late_probe = rpi_cirrus_late_probe, ++ .controls = rpi_cirrus_controls, ++ .num_controls = ARRAY_SIZE(rpi_cirrus_controls), ++ .dapm_widgets = rpi_cirrus_dapm_widgets, ++ .num_dapm_widgets = ARRAY_SIZE(rpi_cirrus_dapm_widgets), ++ .dapm_routes = rpi_cirrus_dapm_routes, ++ .num_dapm_routes = ARRAY_SIZE(rpi_cirrus_dapm_routes), ++ .set_bias_level = rpi_cirrus_set_bias_level, ++ .set_bias_level_post = rpi_cirrus_set_bias_level_post, ++}; ++ ++static int rpi_cirrus_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ struct rpi_cirrus_priv *priv; ++ struct device_node *i2s_node; ++ ++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ priv->min_rate_idx = 1; /* min samplerate 32kHz */ ++ priv->card_rate = RPI_CIRRUS_DEFAULT_RATE; ++ ++ mutex_init(&priv->lock); ++ ++ snd_soc_card_set_drvdata(&rpi_cirrus_card, priv); ++ ++ if (!pdev->dev.of_node) ++ return -ENODEV; ++ ++ i2s_node = of_parse_phandle( ++ pdev->dev.of_node, "i2s-controller", 0); ++ if (!i2s_node) { ++ dev_err(&pdev->dev, "i2s-controller missing in DT\n"); ++ return -ENODEV; ++ } ++ ++ rpi_cirrus_dai[DAI_WM5102].cpu_of_node = i2s_node; ++ rpi_cirrus_dai[DAI_WM5102].platform_of_node = i2s_node; ++ ++ rpi_cirrus_card.dev = &pdev->dev; ++ ++ ret = devm_snd_soc_register_card(&pdev->dev, &rpi_cirrus_card); ++ if (ret) { ++ if (ret == -EPROBE_DEFER) ++ dev_dbg(&pdev->dev, ++ "register card requested probe deferral\n"); ++ else ++ dev_err(&pdev->dev, ++ "Failed to register card: %d\n", ret); ++ } ++ ++ return ret; ++} ++ ++static const struct of_device_id rpi_cirrus_of_match[] = { ++ { .compatible = "wlf,rpi-cirrus", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, rpi_cirrus_of_match); ++ ++static struct platform_driver rpi_cirrus_driver = { ++ .driver = { ++ .name = "snd-rpi-cirrus", ++ .of_match_table = of_match_ptr(rpi_cirrus_of_match), ++ }, ++ .probe = rpi_cirrus_probe, ++}; ++ ++module_platform_driver(rpi_cirrus_driver); ++ ++MODULE_AUTHOR("Matthias Reichl "); ++MODULE_DESCRIPTION("ASoC driver for Cirrus Logic Audio Card"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/brcm2708/patches-4.9/950-0145-config-enable-Cirrus-Logic-Audio-Card.patch b/target/linux/brcm2708/patches-4.9/950-0145-config-enable-Cirrus-Logic-Audio-Card.patch new file mode 100644 index 000000000000..be16a47d2bb0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0145-config-enable-Cirrus-Logic-Audio-Card.patch @@ -0,0 +1,47 @@ +From e34099818448051c8fa84634534dff081540c7b7 Mon Sep 17 00:00:00 2001 +From: Matthias Reichl +Date: Sun, 22 Jan 2017 12:49:37 +0100 +Subject: [PATCH] config: enable Cirrus Logic Audio Card + +Signed-off-by: Matthias Reichl +--- + arch/arm/configs/bcm2709_defconfig | 2 ++ + arch/arm/configs/bcmrpi_defconfig | 2 ++ + 2 files changed, 4 insertions(+) + +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -666,6 +666,7 @@ CONFIG_MFD_ARIZONA_SPI=m + CONFIG_MFD_WM5102=y + CONFIG_REGULATOR=y + CONFIG_REGULATOR_FIXED_VOLTAGE=m ++CONFIG_REGULATOR_ARIZONA=m + CONFIG_MEDIA_SUPPORT=m + CONFIG_MEDIA_CAMERA_SUPPORT=y + CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +@@ -872,6 +873,7 @@ CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m + CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m + CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m + CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m ++CONFIG_SND_BCM2708_SOC_RPI_CIRRUS=m + CONFIG_SND_BCM2708_SOC_RPI_DAC=m + CONFIG_SND_BCM2708_SOC_RPI_PROTO=m + CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -660,6 +660,7 @@ CONFIG_MFD_ARIZONA_SPI=m + CONFIG_MFD_WM5102=y + CONFIG_REGULATOR=y + CONFIG_REGULATOR_FIXED_VOLTAGE=m ++CONFIG_REGULATOR_ARIZONA=m + CONFIG_MEDIA_SUPPORT=m + CONFIG_MEDIA_CAMERA_SUPPORT=y + CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +@@ -866,6 +867,7 @@ CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m + CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m + CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m + CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m ++CONFIG_SND_BCM2708_SOC_RPI_CIRRUS=m + CONFIG_SND_BCM2708_SOC_RPI_DAC=m + CONFIG_SND_BCM2708_SOC_RPI_PROTO=m + CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m diff --git a/target/linux/brcm2708/patches-4.9/950-0146-irq-bcm2836-Avoid-Invalid-trigger-warning.patch b/target/linux/brcm2708/patches-4.9/950-0146-irq-bcm2836-Avoid-Invalid-trigger-warning.patch new file mode 100644 index 000000000000..db9fd39d4877 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0146-irq-bcm2836-Avoid-Invalid-trigger-warning.patch @@ -0,0 +1,24 @@ +From 4a849cef15885cf5dd901fafe45d3fa51b2b2a09 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 9 Feb 2017 14:33:30 +0000 +Subject: [PATCH] irq-bcm2836: Avoid "Invalid trigger warning" + +Initialise the level for each IRQ to avoid a warning from the +arm arch timer code. + +Signed-off-by: Phil Elwell +--- + drivers/irqchip/irq-bcm2836.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/irqchip/irq-bcm2836.c ++++ b/drivers/irqchip/irq-bcm2836.c +@@ -178,7 +178,7 @@ static void bcm2836_arm_irqchip_register + + irq_set_percpu_devid(irq); + irq_set_chip_and_handler(irq, chip, handle_percpu_devid_irq); +- irq_set_status_flags(irq, IRQ_NOAUTOEN); ++ irq_set_status_flags(irq, IRQ_NOAUTOEN | IRQ_TYPE_LEVEL_LOW); + } + + static void diff --git a/target/linux/brcm2708/patches-4.9/950-0147-sound-Demote-deferral-errors-to-INFO-level.patch b/target/linux/brcm2708/patches-4.9/950-0147-sound-Demote-deferral-errors-to-INFO-level.patch new file mode 100644 index 000000000000..0a08eb9a1d7c --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0147-sound-Demote-deferral-errors-to-INFO-level.patch @@ -0,0 +1,35 @@ +From b78e78fa375e3aa1e91b35030e8dfc930ba425f2 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 9 Feb 2017 14:36:44 +0000 +Subject: [PATCH] sound: Demote deferral errors to INFO level + +At present there is no mechanism to specify driver load order, +which can lead to deferrals and repeated retries until successful. +Since this situation is expected, reduce the dmesg level to +INFO and mention that the operation will be retried. + +Signed-off-by: Phil Elwell +--- + sound/soc/soc-core.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/sound/soc/soc-core.c ++++ b/sound/soc/soc-core.c +@@ -1013,7 +1013,7 @@ static int soc_bind_dai_link(struct snd_ + cpu_dai_component.dai_name = dai_link->cpu_dai_name; + rtd->cpu_dai = snd_soc_find_dai(&cpu_dai_component); + if (!rtd->cpu_dai) { +- dev_err(card->dev, "ASoC: CPU DAI %s not registered\n", ++ dev_info(card->dev, "ASoC: CPU DAI %s not registered - will retry\n", + dai_link->cpu_dai_name); + goto _err_defer; + } +@@ -1025,7 +1025,7 @@ static int soc_bind_dai_link(struct snd_ + for (i = 0; i < rtd->num_codecs; i++) { + codec_dais[i] = snd_soc_find_dai(&codecs[i]); + if (!codec_dais[i]) { +- dev_err(card->dev, "ASoC: CODEC DAI %s not registered\n", ++ dev_info(card->dev, "ASoC: CODEC DAI %s not registered - will retry\n", + codecs[i].dai_name); + goto _err_defer; + } diff --git a/target/linux/brcm2708/patches-4.9/950-0148-sound-Suppress-error-message-about-deferrals.patch b/target/linux/brcm2708/patches-4.9/950-0148-sound-Suppress-error-message-about-deferrals.patch new file mode 100644 index 000000000000..52e36b533254 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0148-sound-Suppress-error-message-about-deferrals.patch @@ -0,0 +1,217 @@ +From 6ebd83ad7b2bff00ad3e25811c38e73bb4201b07 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 9 Feb 2017 14:40:33 +0000 +Subject: [PATCH] sound: Suppress error message about deferrals + +Since driver load deferrals are expected and will already +have resulted in a kernel message, suppress an essentially +duplicate error message from the RPi audio board drivers. + +Signed-off-by: Phil Elwell +--- + sound/soc/bcm/adau1977-adc.c | 2 +- + sound/soc/bcm/allo-piano-dac.c | 2 +- + sound/soc/bcm/digidac1-soundcard.c | 4 ++-- + sound/soc/bcm/dionaudio_loco.c | 2 +- + sound/soc/bcm/hifiberry_amp.c | 3 +-- + sound/soc/bcm/hifiberry_dac.c | 2 +- + sound/soc/bcm/hifiberry_dacplus.c | 2 +- + sound/soc/bcm/hifiberry_digi.c | 2 +- + sound/soc/bcm/iqaudio-dac.c | 5 +++-- + sound/soc/bcm/iqaudio_digi.c | 2 +- + sound/soc/bcm/justboom-dac.c | 2 +- + sound/soc/bcm/justboom-digi.c | 2 +- + sound/soc/bcm/pisound.c | 3 ++- + sound/soc/bcm/raspidac3.c | 2 +- + sound/soc/bcm/rpi-dac.c | 2 +- + sound/soc/bcm/rpi-proto.c | 3 +-- + 16 files changed, 20 insertions(+), 20 deletions(-) + +--- a/sound/soc/bcm/adau1977-adc.c ++++ b/sound/soc/bcm/adau1977-adc.c +@@ -90,7 +90,7 @@ static int snd_adau1977_adc_probe(struct + } + + ret = snd_soc_register_card(&snd_adau1977_adc); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); + + return ret; +--- a/sound/soc/bcm/allo-piano-dac.c ++++ b/sound/soc/bcm/allo-piano-dac.c +@@ -109,7 +109,7 @@ static int snd_allo_piano_dac_probe(stru + } + + ret = snd_soc_register_card(&snd_allo_piano_dac); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "snd_soc_register_card() failed: %d\n", ret); + +--- a/sound/soc/bcm/digidac1-soundcard.c ++++ b/sound/soc/bcm/digidac1-soundcard.c +@@ -387,9 +387,9 @@ static int digidac1_soundcard_probe(stru + } + + ret = snd_soc_register_card(&digidac1_soundcard); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", +- ret); ++ ret); + + return ret; + } +--- a/sound/soc/bcm/dionaudio_loco.c ++++ b/sound/soc/bcm/dionaudio_loco.c +@@ -86,7 +86,7 @@ static int snd_rpi_dionaudio_loco_probe( + } + + ret = snd_soc_register_card(&snd_rpi_dionaudio_loco); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", + ret); + +--- a/sound/soc/bcm/hifiberry_amp.c ++++ b/sound/soc/bcm/hifiberry_amp.c +@@ -96,9 +96,8 @@ static int snd_rpi_hifiberry_amp_probe(s + + ret = snd_soc_register_card(&snd_rpi_hifiberry_amp); + +- if (ret != 0) { ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); +- } + + return ret; + } +--- a/sound/soc/bcm/hifiberry_dac.c ++++ b/sound/soc/bcm/hifiberry_dac.c +@@ -90,7 +90,7 @@ static int snd_rpi_hifiberry_dac_probe(s + } + + ret = snd_soc_register_card(&snd_rpi_hifiberry_dac); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); + + return ret; +--- a/sound/soc/bcm/hifiberry_dacplus.c ++++ b/sound/soc/bcm/hifiberry_dacplus.c +@@ -324,7 +324,7 @@ static int snd_rpi_hifiberry_dacplus_pro + } + + ret = snd_soc_register_card(&snd_rpi_hifiberry_dacplus); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "snd_soc_register_card() failed: %d\n", ret); + +--- a/sound/soc/bcm/hifiberry_digi.c ++++ b/sound/soc/bcm/hifiberry_digi.c +@@ -242,7 +242,7 @@ static int snd_rpi_hifiberry_digi_probe( + } + + ret = snd_soc_register_card(&snd_rpi_hifiberry_digi); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); + + return ret; +--- a/sound/soc/bcm/iqaudio-dac.c ++++ b/sound/soc/bcm/iqaudio-dac.c +@@ -197,8 +197,9 @@ static int snd_rpi_iqaudio_dac_probe(str + + ret = snd_soc_register_card(&snd_rpi_iqaudio_dac); + if (ret) { +- dev_err(&pdev->dev, +- "snd_soc_register_card() failed: %d\n", ret); ++ if (ret != -EPROBE_DEFER) ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); + return ret; + } + +--- a/sound/soc/bcm/iqaudio_digi.c ++++ b/sound/soc/bcm/iqaudio_digi.c +@@ -204,7 +204,7 @@ static int snd_rpi_iqaudio_digi_probe(st + } + + ret = snd_soc_register_card(card); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", + ret); + +--- a/sound/soc/bcm/justboom-dac.c ++++ b/sound/soc/bcm/justboom-dac.c +@@ -128,7 +128,7 @@ static int snd_rpi_justboom_dac_probe(st + } + + ret = snd_soc_register_card(&snd_rpi_justboom_dac); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "snd_soc_register_card() failed: %d\n", ret); + +--- a/sound/soc/bcm/justboom-digi.c ++++ b/sound/soc/bcm/justboom-digi.c +@@ -181,7 +181,7 @@ static int snd_rpi_justboom_digi_probe(s + } + + ret = snd_soc_register_card(&snd_rpi_justboom_digi); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "snd_soc_register_card() failed: %d\n", ret); + +--- a/sound/soc/bcm/pisound.c ++++ b/sound/soc/bcm/pisound.c +@@ -1076,7 +1076,8 @@ static int pisnd_probe(struct platform_d + ret = snd_soc_register_card(&pisnd_card); + + if (ret < 0) { +- printe("snd_soc_register_card() failed: %d\n", ret); ++ if (ret != -EPROBE_DEFER) ++ printe("snd_soc_register_card() failed: %d\n", ret); + pisnd_uninit_gpio(); + kobject_put(pisnd_kobj); + pisnd_spi_uninit(); +--- a/sound/soc/bcm/raspidac3.c ++++ b/sound/soc/bcm/raspidac3.c +@@ -149,7 +149,7 @@ static int snd_rpi_raspidac3_probe(struc + } + + ret = snd_soc_register_card(&snd_rpi_raspidac3); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "snd_soc_register_card() failed: %d\n", ret); + +--- a/sound/soc/bcm/rpi-dac.c ++++ b/sound/soc/bcm/rpi-dac.c +@@ -85,7 +85,7 @@ static int snd_rpi_rpi_dac_probe(struct + } + + ret = snd_soc_register_card(&snd_rpi_rpi_dac); +- if (ret) ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); + + return ret; +--- a/sound/soc/bcm/rpi-proto.c ++++ b/sound/soc/bcm/rpi-proto.c +@@ -117,10 +117,9 @@ static int snd_rpi_proto_probe(struct pl + } + + ret = snd_soc_register_card(&snd_rpi_proto); +- if (ret) { ++ if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "snd_soc_register_card() failed: %d\n", ret); +- } + + return ret; + } diff --git a/target/linux/brcm2708/patches-4.9/950-0149-Update-vfpmodule.c.patch b/target/linux/brcm2708/patches-4.9/950-0149-Update-vfpmodule.c.patch new file mode 100644 index 000000000000..16d740aafb20 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0149-Update-vfpmodule.c.patch @@ -0,0 +1,137 @@ +From aa00ca3b0296c40a6b5a1ad32258d5b655a28c70 Mon Sep 17 00:00:00 2001 +From: Claggy3 +Date: Sat, 11 Feb 2017 14:00:30 +0000 +Subject: [PATCH] Update vfpmodule.c + +Christopher Alexander Tobias Schulze - May 2, 2015, 11:57 a.m. +This patch fixes a problem with VFP state save and restore related +to exception handling (panic with message "BUG: unsupported FP +instruction in kernel mode") present on VFP11 floating point units +(as used with ARM1176JZF-S CPUs, e.g. on first generation Raspberry +Pi boards). This patch was developed and discussed on + + https://github.com/raspberrypi/linux/issues/859 + +A precondition to see the crashes is that floating point exception +traps are enabled. In this case, the VFP11 might determine that a FPU +operation needs to trap at a point in time when it is not possible to +signal this to the ARM11 core any more. The VFP11 will then set the +FPEXC.EX bit and store the trapped opcode in FPINST. (In some cases, +a second opcode might have been accepted by the VFP11 before the +exception was detected and could be reported to the ARM11 - in this +case, the VFP11 also sets FPEXC.FP2V and stores the second opcode in +FPINST2.) + +If FPEXC.EX is set, the VFP11 will "bounce" the next FPU opcode issued +by the ARM11 CPU, which will be seen by the ARM11 as an undefined opcode +trap. The VFP support code examines the FPEXC.EX and FPEXC.FP2V bits +to decide what actions to take, i.e., whether to emulate the opcodes +found in FPINST and FPINST2, and whether to retry the bounced instruction. + +If a user space application has left the VFP11 in this "pending trap" +state, the next FPU opcode issued to the VFP11 might actually be the +VSTMIA operation vfp_save_state() uses to store the FPU registers +to memory (in our test cases, when building the signal stack frame). +In this case, the kernel crashes as described above. + +This patch fixes the problem by making sure that vfp_save_state() is +always entered with FPEXC.EX cleared. (The current value of FPEXC has +already been saved, so this does not corrupt the context. Clearing +FPEXC.EX has no effects on FPINST or FPINST2. Also note that many +callers already modify FPEXC by setting FPEXC.EN before invoking +vfp_save_state().) + +This patch also addresses a second problem related to FPEXC.EX: After +returning from signal handling, the kernel reloads the VFP context +from the user mode stack. However, the current code explicitly clears +both FPEXC.EX and FPEXC.FP2V during reload. As VFP11 requires these +bits to be preserved, this patch disables clearing them for VFP +implementations belonging to architecture 1. There should be no +negative side effects: the user can set both bits by executing FPU +opcodes anyway, and while user code may now place arbitrary values +into FPINST and FPINST2 (e.g., non-VFP ARM opcodes) the VFP support +code knows which instructions can be emulated, and rejects other +opcodes with "unhandled bounce" messages, so there should be no +security impact from allowing reloading FPEXC.EX and FPEXC.FP2V. + +Signed-off-by: Christopher Alexander Tobias Schulze +--- + arch/arm/vfp/vfpmodule.c | 25 +++++++++++++++++++------ + 1 file changed, 19 insertions(+), 6 deletions(-) + +--- a/arch/arm/vfp/vfpmodule.c ++++ b/arch/arm/vfp/vfpmodule.c +@@ -179,8 +179,11 @@ static int vfp_notifier(struct notifier_ + * case the thread migrates to a different CPU. The + * restoring is done lazily. + */ +- if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) ++ if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) { ++ /* vfp_save_state oopses on VFP11 if EX bit set */ ++ fmxr(FPEXC, fpexc & ~FPEXC_EX); + vfp_save_state(vfp_current_hw_state[cpu], fpexc); ++ } + #endif + + /* +@@ -463,13 +466,16 @@ static int vfp_pm_suspend(void) + /* if vfp is on, then save state for resumption */ + if (fpexc & FPEXC_EN) { + pr_debug("%s: saving vfp state\n", __func__); ++ /* vfp_save_state oopses on VFP11 if EX bit set */ ++ fmxr(FPEXC, fpexc & ~FPEXC_EX); + vfp_save_state(&ti->vfpstate, fpexc); + + /* disable, just in case */ + fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); + } else if (vfp_current_hw_state[ti->cpu]) { + #ifndef CONFIG_SMP +- fmxr(FPEXC, fpexc | FPEXC_EN); ++ /* vfp_save_state oopses on VFP11 if EX bit set */ ++ fmxr(FPEXC, (fpexc & ~FPEXC_EX) | FPEXC_EN); + vfp_save_state(vfp_current_hw_state[ti->cpu], fpexc); + fmxr(FPEXC, fpexc); + #endif +@@ -532,7 +538,8 @@ void vfp_sync_hwstate(struct thread_info + /* + * Save the last VFP state on this CPU. + */ +- fmxr(FPEXC, fpexc | FPEXC_EN); ++ /* vfp_save_state oopses on VFP11 if EX bit set */ ++ fmxr(FPEXC, (fpexc & ~FPEXC_EX) | FPEXC_EN); + vfp_save_state(&thread->vfpstate, fpexc | FPEXC_EN); + fmxr(FPEXC, fpexc); + } +@@ -604,6 +611,7 @@ int vfp_restore_user_hwstate(struct user + struct vfp_hard_struct *hwstate = &thread->vfpstate.hard; + unsigned long fpexc; + int err = 0; ++ u32 fpsid = fmrx(FPSID); + + /* Disable VFP to avoid corrupting the new thread state. */ + vfp_flush_hwstate(thread); +@@ -627,8 +635,12 @@ int vfp_restore_user_hwstate(struct user + /* Ensure the VFP is enabled. */ + fpexc |= FPEXC_EN; + +- /* Ensure FPINST2 is invalid and the exception flag is cleared. */ +- fpexc &= ~(FPEXC_EX | FPEXC_FP2V); ++ /* Mask FPXEC_EX and FPEXC_FP2V if not required by VFP arch */ ++ if ((fpsid & FPSID_ARCH_MASK) != (1 << FPSID_ARCH_BIT)) { ++ /* Ensure FPINST2 is invalid and the exception flag is cleared. */ ++ fpexc &= ~(FPEXC_EX | FPEXC_FP2V); ++ } ++ + hwstate->fpexc = fpexc; + + __get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err); +@@ -698,7 +710,8 @@ void kernel_neon_begin(void) + cpu = get_cpu(); + + fpexc = fmrx(FPEXC) | FPEXC_EN; +- fmxr(FPEXC, fpexc); ++ /* vfp_save_state oopses on VFP11 if EX bit set */ ++ fmxr(FPEXC, fpexc & ~FPEXC_EX); + + /* + * Save the userland NEON/VFP state. Under UP, diff --git a/target/linux/brcm2708/patches-4.9/950-0150-dwc_otg-fix-summarize-urb-actual_length-for-isochron.patch b/target/linux/brcm2708/patches-4.9/950-0150-dwc_otg-fix-summarize-urb-actual_length-for-isochron.patch new file mode 100644 index 000000000000..295db595ca27 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0150-dwc_otg-fix-summarize-urb-actual_length-for-isochron.patch @@ -0,0 +1,28 @@ +From f9efb72c44da2cce9cceca01c8f6118ec1605c69 Mon Sep 17 00:00:00 2001 +From: Martin Cerveny +Date: Mon, 13 Feb 2017 17:23:47 +0100 +Subject: [PATCH] dwc_otg: fix summarize urb->actual_length for isochronous + transfers + +Kernel does not copy input data of ISO transfers to userspace +if actual_length is set only in ISO transfers and not summarized +in urb->actual_length. Fixes raspberrypi/linux#903 +--- + drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c +@@ -334,10 +334,12 @@ static int _complete(dwc_otg_hcd_t * hcd + int i; + + urb->error_count = dwc_otg_hcd_urb_get_error_count(dwc_otg_urb); ++ urb->actual_length = 0; + for (i = 0; i < urb->number_of_packets; ++i) { + urb->iso_frame_desc[i].actual_length = + dwc_otg_hcd_urb_get_iso_desc_actual_length + (dwc_otg_urb, i); ++ urb->actual_length += urb->iso_frame_desc[i].actual_length; + urb->iso_frame_desc[i].status = + dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_urb, i); + } diff --git a/target/linux/brcm2708/patches-4.9/950-0151-clk-bcm2835-Fix-fixed_divider-of-pllh_aux.patch b/target/linux/brcm2708/patches-4.9/950-0151-clk-bcm2835-Fix-fixed_divider-of-pllh_aux.patch new file mode 100644 index 000000000000..82f462847b87 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0151-clk-bcm2835-Fix-fixed_divider-of-pllh_aux.patch @@ -0,0 +1,27 @@ +From b8ded4dca34feafd33f22eff47d19b17b7dd83f4 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Tue, 22 Nov 2016 12:45:28 -0800 +Subject: [PATCH] clk: bcm2835: Fix ->fixed_divider of pllh_aux + +There is no fixed divider on pllh_aux. + +Signed-off-by: Boris Brezillon +Signed-off-by: Eric Anholt +Reviewed-by: Eric Anholt +Signed-off-by: Stephen Boyd +(cherry picked from commit f2a46926aba1f0c33944901d2420a6a887455ddc) +--- + drivers/clk/bcm/clk-bcm2835.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1607,7 +1607,7 @@ static const struct bcm2835_clk_desc clk + .a2w_reg = A2W_PLLH_AUX, + .load_mask = CM_PLLH_LOADAUX, + .hold_mask = 0, +- .fixed_divider = 10), ++ .fixed_divider = 1), + [BCM2835_PLLH_PIX] = REGISTER_PLL_DIV( + .name = "pllh_pix", + .source_pll = "pllh", diff --git a/target/linux/brcm2708/patches-4.9/950-0152-clk-bcm-Support-rate-change-propagation-on-bcm2835-c.patch b/target/linux/brcm2708/patches-4.9/950-0152-clk-bcm-Support-rate-change-propagation-on-bcm2835-c.patch new file mode 100644 index 000000000000..448b0375b3e3 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0152-clk-bcm-Support-rate-change-propagation-on-bcm2835-c.patch @@ -0,0 +1,124 @@ +From 2988239956fddb3fb808cfb50fa8d4e68b893f3d Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Thu, 1 Dec 2016 22:00:19 +0100 +Subject: [PATCH] clk: bcm: Support rate change propagation on bcm2835 clocks + +Some peripheral clocks, like the VEC (Video EnCoder) clock need to be set +to a precise rate (in our case 108MHz). With the current implementation, +where peripheral clocks are not allowed to forward rate change requests +to their parents, it is impossible to match this requirement unless the +bootloader has configured things correctly, or a specific rate has been +assigned through the DT (with the assigned-clk-rates property). + +Add a new field to struct bcm2835_clock_data to specify which parent +clocks accept rate change propagation, and support set rate propagation +in bcm2835_clock_determine_rate(). + +Signed-off-by: Boris Brezillon +Reviewed-by: Eric Anholt +Signed-off-by: Stephen Boyd +(cherry picked from commit 155e8b3b0ee320ae866b97dd31eba8a1f080a772) +--- + drivers/clk/bcm/clk-bcm2835.c | 67 ++++++++++++++++++++++++++++++++++++++++--- + 1 file changed, 63 insertions(+), 4 deletions(-) + +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -436,6 +436,9 @@ struct bcm2835_clock_data { + const char *const *parents; + int num_mux_parents; + ++ /* Bitmap encoding which parents accept rate change propagation. */ ++ unsigned int set_rate_parent; ++ + u32 ctl_reg; + u32 div_reg; + +@@ -1017,10 +1020,60 @@ bcm2835_clk_is_pllc(struct clk_hw *hw) + return strncmp(clk_hw_get_name(hw), "pllc", 4) == 0; + } + ++static unsigned long bcm2835_clock_choose_div_and_prate(struct clk_hw *hw, ++ int parent_idx, ++ unsigned long rate, ++ u32 *div, ++ unsigned long *prate) ++{ ++ struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); ++ struct bcm2835_cprman *cprman = clock->cprman; ++ const struct bcm2835_clock_data *data = clock->data; ++ unsigned long best_rate; ++ u32 curdiv, mindiv, maxdiv; ++ struct clk_hw *parent; ++ ++ parent = clk_hw_get_parent_by_index(hw, parent_idx); ++ ++ if (!(BIT(parent_idx) & data->set_rate_parent)) { ++ *prate = clk_hw_get_rate(parent); ++ *div = bcm2835_clock_choose_div(hw, rate, *prate, true); ++ ++ return bcm2835_clock_rate_from_divisor(clock, *prate, ++ *div); ++ } ++ ++ if (data->frac_bits) ++ dev_warn(cprman->dev, ++ "frac bits are not used when propagating rate change"); ++ ++ /* clamp to min divider of 2 if we're dealing with a mash clock */ ++ mindiv = data->is_mash_clock ? 2 : 1; ++ maxdiv = BIT(data->int_bits) - 1; ++ ++ /* TODO: Be smart, and only test a subset of the available divisors. */ ++ for (curdiv = mindiv; curdiv <= maxdiv; curdiv++) { ++ unsigned long tmp_rate; ++ ++ tmp_rate = clk_hw_round_rate(parent, rate * curdiv); ++ tmp_rate /= curdiv; ++ if (curdiv == mindiv || ++ (tmp_rate > best_rate && tmp_rate <= rate)) ++ best_rate = tmp_rate; ++ ++ if (best_rate == rate) ++ break; ++ } ++ ++ *div = curdiv << CM_DIV_FRAC_BITS; ++ *prate = curdiv * best_rate; ++ ++ return best_rate; ++} ++ + static int bcm2835_clock_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) + { +- struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct clk_hw *parent, *best_parent = NULL; + bool current_parent_is_pllc; + unsigned long rate, best_rate = 0; +@@ -1048,9 +1101,8 @@ static int bcm2835_clock_determine_rate( + if (bcm2835_clk_is_pllc(parent) && !current_parent_is_pllc) + continue; + +- prate = clk_hw_get_rate(parent); +- div = bcm2835_clock_choose_div(hw, req->rate, prate, true); +- rate = bcm2835_clock_rate_from_divisor(clock, prate, div); ++ rate = bcm2835_clock_choose_div_and_prate(hw, i, req->rate, ++ &div, &prate); + if (rate > best_rate && rate <= req->rate) { + best_parent = parent; + best_prate = prate; +@@ -1271,6 +1323,13 @@ static struct clk_hw *bcm2835_register_c + if ((cprman_read(cprman, data->ctl_reg) & CM_ENABLE) == 0) + init.flags &= ~CLK_IS_CRITICAL; + ++ /* ++ * Pass the CLK_SET_RATE_PARENT flag if we are allowed to propagate ++ * rate changes on at least of the parents. ++ */ ++ if (data->set_rate_parent) ++ init.flags |= CLK_SET_RATE_PARENT; ++ + if (data->is_vpu_clock) { + init.ops = &bcm2835_vpu_clock_clk_ops; + } else { diff --git a/target/linux/brcm2708/patches-4.9/950-0153-clk-bcm-Allow-rate-change-propagation-to-PLLH_AUX-on.patch b/target/linux/brcm2708/patches-4.9/950-0153-clk-bcm-Allow-rate-change-propagation-to-PLLH_AUX-on.patch new file mode 100644 index 000000000000..ed082abaa505 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0153-clk-bcm-Allow-rate-change-propagation-to-PLLH_AUX-on.patch @@ -0,0 +1,35 @@ +From 5209e1b8f78fd1184f25cf19cf0daa58f4ad6599 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Thu, 1 Dec 2016 22:00:20 +0100 +Subject: [PATCH] clk: bcm: Allow rate change propagation to PLLH_AUX on VEC + clock + +The VEC clock requires needs to be set at exactly 108MHz. Allow rate +change propagation on PLLH_AUX to match this requirement wihtout +impacting other IPs (PLLH is currently only used by the HDMI encoder, +which cannot be enabled when the VEC encoder is enabled). + +Signed-off-by: Boris Brezillon +Reviewed-by: Eric Anholt +Signed-off-by: Stephen Boyd +(cherry picked from commit d86d46af84855403c00018be1c3e7bc190f2a6cd) +--- + drivers/clk/bcm/clk-bcm2835.c | 7 ++++++- + 1 file changed, 6 insertions(+), 1 deletion(-) + +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1870,7 +1870,12 @@ static const struct bcm2835_clk_desc clk + .ctl_reg = CM_VECCTL, + .div_reg = CM_VECDIV, + .int_bits = 4, +- .frac_bits = 0), ++ .frac_bits = 0, ++ /* ++ * Allow rate change propagation only on PLLH_AUX which is ++ * assigned index 7 in the parent array. ++ */ ++ .set_rate_parent = BIT(7)), + + /* dsi clocks */ + [BCM2835_CLOCK_DSI0E] = REGISTER_PER_CLK( diff --git a/target/linux/brcm2708/patches-4.9/950-0154-clk-bcm-Fix-maybe-uninitialized-warning-in-bcm2835_c.patch b/target/linux/brcm2708/patches-4.9/950-0154-clk-bcm-Fix-maybe-uninitialized-warning-in-bcm2835_c.patch new file mode 100644 index 000000000000..01e29775b97a --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0154-clk-bcm-Fix-maybe-uninitialized-warning-in-bcm2835_c.patch @@ -0,0 +1,29 @@ +From 9db88c2a81a12eb2b2953ee1f9090624fcc47dab Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Mon, 12 Dec 2016 09:00:53 +0100 +Subject: [PATCH] clk: bcm: Fix 'maybe-uninitialized' warning in + bcm2835_clock_choose_div_and_prate() + +best_rate is reported as potentially uninitialized by gcc. + +Signed-off-by: Boris Brezillon +Fixes: 155e8b3b0ee3 ("clk: bcm: Support rate change propagation on bcm2835 clocks") +Reported-by: Stephen Rothwell +Reviewed-by: Eric Anholt +Signed-off-by: Stephen Boyd +(cherry picked from commit 2aab7a2055a1705c9e30920d95a596226999eb21) +--- + drivers/clk/bcm/clk-bcm2835.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1029,7 +1029,7 @@ static unsigned long bcm2835_clock_choos + struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct bcm2835_cprman *cprman = clock->cprman; + const struct bcm2835_clock_data *data = clock->data; +- unsigned long best_rate; ++ unsigned long best_rate = 0; + u32 curdiv, mindiv, maxdiv; + struct clk_hw *parent; + diff --git a/target/linux/brcm2708/patches-4.9/950-0155-clk-bcm2835-Don-t-rate-change-PLLs-on-behalf-of-DSI-.patch b/target/linux/brcm2708/patches-4.9/950-0155-clk-bcm2835-Don-t-rate-change-PLLs-on-behalf-of-DSI-.patch new file mode 100644 index 000000000000..154e06115579 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0155-clk-bcm2835-Don-t-rate-change-PLLs-on-behalf-of-DSI-.patch @@ -0,0 +1,172 @@ +From 999db52750c062708532e1357ea3942cc619794f Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 18 Jan 2017 07:31:55 +1100 +Subject: [PATCH] clk: bcm2835: Don't rate change PLLs on behalf of DSI PLL + dividers. + +Our core PLLs are intended to be configured once and left alone. With +the SET_RATE_PARENT, asking to set the PLLD_DSI1 clock rate would +change PLLD just to get closer to the requested DSI clock, thus +changing PLLD_PER, the UART and ethernet PHY clock rates downstream of +it, and breaking ethernet. + +We *do* want PLLH to change so that PLLH_AUX can be exactly the value +we want, though. Thus, we need to have a per-divider policy of +whether to pass rate changes up. + +Signed-off-by: Eric Anholt +Signed-off-by: Stephen Boyd +(cherry picked from commit 55486091bd1e1c5ed28c43c0d6b3392468a9adb5) +--- + drivers/clk/bcm/clk-bcm2835.c | 42 ++++++++++++++++++++++++++++-------------- + 1 file changed, 28 insertions(+), 14 deletions(-) + +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -428,6 +428,7 @@ struct bcm2835_pll_divider_data { + u32 load_mask; + u32 hold_mask; + u32 fixed_divider; ++ u32 flags; + }; + + struct bcm2835_clock_data { +@@ -1252,7 +1253,7 @@ bcm2835_register_pll_divider(struct bcm2 + init.num_parents = 1; + init.name = divider_name; + init.ops = &bcm2835_pll_divider_clk_ops; +- init.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED; ++ init.flags = data->flags | CLK_IGNORE_UNUSED; + + divider = devm_kzalloc(cprman->dev, sizeof(*divider), GFP_KERNEL); + if (!divider) +@@ -1475,7 +1476,8 @@ static const struct bcm2835_clk_desc clk + .a2w_reg = A2W_PLLA_CORE, + .load_mask = CM_PLLA_LOADCORE, + .hold_mask = CM_PLLA_HOLDCORE, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLA_PER] = REGISTER_PLL_DIV( + .name = "plla_per", + .source_pll = "plla", +@@ -1483,7 +1485,8 @@ static const struct bcm2835_clk_desc clk + .a2w_reg = A2W_PLLA_PER, + .load_mask = CM_PLLA_LOADPER, + .hold_mask = CM_PLLA_HOLDPER, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLA_DSI0] = REGISTER_PLL_DIV( + .name = "plla_dsi0", + .source_pll = "plla", +@@ -1499,7 +1502,8 @@ static const struct bcm2835_clk_desc clk + .a2w_reg = A2W_PLLA_CCP2, + .load_mask = CM_PLLA_LOADCCP2, + .hold_mask = CM_PLLA_HOLDCCP2, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + + /* PLLB is used for the ARM's clock. */ + [BCM2835_PLLB] = REGISTER_PLL( +@@ -1523,7 +1527,8 @@ static const struct bcm2835_clk_desc clk + .a2w_reg = A2W_PLLB_ARM, + .load_mask = CM_PLLB_LOADARM, + .hold_mask = CM_PLLB_HOLDARM, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + + /* + * PLLC is the core PLL, used to drive the core VPU clock. +@@ -1552,7 +1557,8 @@ static const struct bcm2835_clk_desc clk + .a2w_reg = A2W_PLLC_CORE0, + .load_mask = CM_PLLC_LOADCORE0, + .hold_mask = CM_PLLC_HOLDCORE0, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLC_CORE1] = REGISTER_PLL_DIV( + .name = "pllc_core1", + .source_pll = "pllc", +@@ -1560,7 +1566,8 @@ static const struct bcm2835_clk_desc clk + .a2w_reg = A2W_PLLC_CORE1, + .load_mask = CM_PLLC_LOADCORE1, + .hold_mask = CM_PLLC_HOLDCORE1, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLC_CORE2] = REGISTER_PLL_DIV( + .name = "pllc_core2", + .source_pll = "pllc", +@@ -1568,7 +1575,8 @@ static const struct bcm2835_clk_desc clk + .a2w_reg = A2W_PLLC_CORE2, + .load_mask = CM_PLLC_LOADCORE2, + .hold_mask = CM_PLLC_HOLDCORE2, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLC_PER] = REGISTER_PLL_DIV( + .name = "pllc_per", + .source_pll = "pllc", +@@ -1576,7 +1584,8 @@ static const struct bcm2835_clk_desc clk + .a2w_reg = A2W_PLLC_PER, + .load_mask = CM_PLLC_LOADPER, + .hold_mask = CM_PLLC_HOLDPER, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + + /* + * PLLD is the display PLL, used to drive DSI display panels. +@@ -1605,7 +1614,8 @@ static const struct bcm2835_clk_desc clk + .a2w_reg = A2W_PLLD_CORE, + .load_mask = CM_PLLD_LOADCORE, + .hold_mask = CM_PLLD_HOLDCORE, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLD_PER] = REGISTER_PLL_DIV( + .name = "plld_per", + .source_pll = "plld", +@@ -1613,7 +1623,8 @@ static const struct bcm2835_clk_desc clk + .a2w_reg = A2W_PLLD_PER, + .load_mask = CM_PLLD_LOADPER, + .hold_mask = CM_PLLD_HOLDPER, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLD_DSI0] = REGISTER_PLL_DIV( + .name = "plld_dsi0", + .source_pll = "plld", +@@ -1658,7 +1669,8 @@ static const struct bcm2835_clk_desc clk + .a2w_reg = A2W_PLLH_RCAL, + .load_mask = CM_PLLH_LOADRCAL, + .hold_mask = 0, +- .fixed_divider = 10), ++ .fixed_divider = 10, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLH_AUX] = REGISTER_PLL_DIV( + .name = "pllh_aux", + .source_pll = "pllh", +@@ -1666,7 +1678,8 @@ static const struct bcm2835_clk_desc clk + .a2w_reg = A2W_PLLH_AUX, + .load_mask = CM_PLLH_LOADAUX, + .hold_mask = 0, +- .fixed_divider = 1), ++ .fixed_divider = 1, ++ .flags = CLK_SET_RATE_PARENT), + [BCM2835_PLLH_PIX] = REGISTER_PLL_DIV( + .name = "pllh_pix", + .source_pll = "pllh", +@@ -1674,7 +1687,8 @@ static const struct bcm2835_clk_desc clk + .a2w_reg = A2W_PLLH_PIX, + .load_mask = CM_PLLH_LOADPIX, + .hold_mask = 0, +- .fixed_divider = 10), ++ .fixed_divider = 10, ++ .flags = CLK_SET_RATE_PARENT), + + /* the clocks */ + diff --git a/target/linux/brcm2708/patches-4.9/950-0156-clk-bcm2835-Register-the-DSI0-DSI1-pixel-clocks.patch b/target/linux/brcm2708/patches-4.9/950-0156-clk-bcm2835-Register-the-DSI0-DSI1-pixel-clocks.patch new file mode 100644 index 000000000000..24e8aedbdc9c --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0156-clk-bcm2835-Register-the-DSI0-DSI1-pixel-clocks.patch @@ -0,0 +1,238 @@ +From 876f8ef32ec09fb566cc6ecdf4c96a8348f135b6 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 18 Jan 2017 07:31:56 +1100 +Subject: [PATCH] clk: bcm2835: Register the DSI0/DSI1 pixel clocks. + +The DSI pixel clocks are muxed from clocks generated in the analog phy +by the DSI driver. In order to set them as parents, we need to do the +same name lookup dance on them as we do for our root oscillator. + +Signed-off-by: Eric Anholt +Signed-off-by: Stephen Boyd +(cherry picked from commit 8a39e9fa578229fd4604266c6ebb1a3a77d7994c) +--- + .../bindings/clock/brcm,bcm2835-cprman.txt | 15 ++- + drivers/clk/bcm/clk-bcm2835.c | 121 +++++++++++++++++++-- + include/dt-bindings/clock/bcm2835.h | 2 + + 3 files changed, 125 insertions(+), 13 deletions(-) + +--- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt ++++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt +@@ -16,7 +16,20 @@ Required properties: + - #clock-cells: Should be <1>. The permitted clock-specifier values can be + found in include/dt-bindings/clock/bcm2835.h + - reg: Specifies base physical address and size of the registers +-- clocks: The external oscillator clock phandle ++- clocks: phandles to the parent clocks used as input to the module, in ++ the following order: ++ ++ - External oscillator ++ - DSI0 byte clock ++ - DSI0 DDR2 clock ++ - DSI0 DDR clock ++ - DSI1 byte clock ++ - DSI1 DDR2 clock ++ - DSI1 DDR clock ++ ++ Only external oscillator is required. The DSI clocks may ++ not be present, in which case their children will be ++ unusable. + + Example: + +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -297,11 +297,32 @@ + #define LOCK_TIMEOUT_NS 100000000 + #define BCM2835_MAX_FB_RATE 1750000000u + ++/* ++ * Names of clocks used within the driver that need to be replaced ++ * with an external parent's name. This array is in the order that ++ * the clocks node in the DT references external clocks. ++ */ ++static const char *const cprman_parent_names[] = { ++ "xosc", ++ "dsi0_byte", ++ "dsi0_ddr2", ++ "dsi0_ddr", ++ "dsi1_byte", ++ "dsi1_ddr2", ++ "dsi1_ddr", ++}; ++ + struct bcm2835_cprman { + struct device *dev; + void __iomem *regs; + spinlock_t regs_lock; /* spinlock for all clocks */ +- const char *osc_name; ++ ++ /* ++ * Real names of cprman clock parents looked up through ++ * of_clk_get_parent_name(), which will be used in the ++ * parent_names[] arrays for clock registration. ++ */ ++ const char *real_parent_names[ARRAY_SIZE(cprman_parent_names)]; + + /* Must be last */ + struct clk_hw_onecell_data onecell; +@@ -907,6 +928,9 @@ static long bcm2835_clock_rate_from_divi + const struct bcm2835_clock_data *data = clock->data; + u64 temp; + ++ if (data->int_bits == 0 && data->frac_bits == 0) ++ return parent_rate; ++ + /* + * The divisor is a 12.12 fixed point field, but only some of + * the bits are populated in any given clock. +@@ -930,7 +954,12 @@ static unsigned long bcm2835_clock_get_r + struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); + struct bcm2835_cprman *cprman = clock->cprman; + const struct bcm2835_clock_data *data = clock->data; +- u32 div = cprman_read(cprman, data->div_reg); ++ u32 div; ++ ++ if (data->int_bits == 0 && data->frac_bits == 0) ++ return parent_rate; ++ ++ div = cprman_read(cprman, data->div_reg); + + return bcm2835_clock_rate_from_divisor(clock, parent_rate, div); + } +@@ -1209,7 +1238,7 @@ static struct clk_hw *bcm2835_register_p + memset(&init, 0, sizeof(init)); + + /* All of the PLLs derive from the external oscillator. */ +- init.parent_names = &cprman->osc_name; ++ init.parent_names = &cprman->real_parent_names[0]; + init.num_parents = 1; + init.name = data->name; + init.ops = &bcm2835_pll_clk_ops; +@@ -1295,18 +1324,22 @@ static struct clk_hw *bcm2835_register_c + struct bcm2835_clock *clock; + struct clk_init_data init; + const char *parents[1 << CM_SRC_BITS]; +- size_t i; ++ size_t i, j; + int ret; + + /* +- * Replace our "xosc" references with the oscillator's +- * actual name. ++ * Replace our strings referencing parent clocks with the ++ * actual clock-output-name of the parent. + */ + for (i = 0; i < data->num_mux_parents; i++) { +- if (strcmp(data->parents[i], "xosc") == 0) +- parents[i] = cprman->osc_name; +- else +- parents[i] = data->parents[i]; ++ parents[i] = data->parents[i]; ++ ++ for (j = 0; j < ARRAY_SIZE(cprman_parent_names); j++) { ++ if (strcmp(parents[i], cprman_parent_names[j]) == 0) { ++ parents[i] = cprman->real_parent_names[j]; ++ break; ++ } ++ } + } + + memset(&init, 0, sizeof(init)); +@@ -1442,6 +1475,47 @@ static const char *const bcm2835_clock_v + __VA_ARGS__) + + /* ++ * DSI parent clocks. The DSI byte/DDR/DDR2 clocks come from the DSI ++ * analog PHY. The _inv variants are generated internally to cprman, ++ * but we don't use them so they aren't hooked up. ++ */ ++static const char *const bcm2835_clock_dsi0_parents[] = { ++ "gnd", ++ "xosc", ++ "testdebug0", ++ "testdebug1", ++ "dsi0_ddr", ++ "dsi0_ddr_inv", ++ "dsi0_ddr2", ++ "dsi0_ddr2_inv", ++ "dsi0_byte", ++ "dsi0_byte_inv", ++}; ++ ++static const char *const bcm2835_clock_dsi1_parents[] = { ++ "gnd", ++ "xosc", ++ "testdebug0", ++ "testdebug1", ++ "dsi1_ddr", ++ "dsi1_ddr_inv", ++ "dsi1_ddr2", ++ "dsi1_ddr2_inv", ++ "dsi1_byte", ++ "dsi1_byte_inv", ++}; ++ ++#define REGISTER_DSI0_CLK(...) REGISTER_CLK( \ ++ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_dsi0_parents), \ ++ .parents = bcm2835_clock_dsi0_parents, \ ++ __VA_ARGS__) ++ ++#define REGISTER_DSI1_CLK(...) REGISTER_CLK( \ ++ .num_mux_parents = ARRAY_SIZE(bcm2835_clock_dsi1_parents), \ ++ .parents = bcm2835_clock_dsi1_parents, \ ++ __VA_ARGS__) ++ ++/* + * the real definition of all the pll, pll_dividers and clocks + * these make use of the above REGISTER_* macros + */ +@@ -1904,6 +1978,18 @@ static const struct bcm2835_clk_desc clk + .div_reg = CM_DSI1EDIV, + .int_bits = 4, + .frac_bits = 8), ++ [BCM2835_CLOCK_DSI0P] = REGISTER_DSI0_CLK( ++ .name = "dsi0p", ++ .ctl_reg = CM_DSI0PCTL, ++ .div_reg = CM_DSI0PDIV, ++ .int_bits = 0, ++ .frac_bits = 0), ++ [BCM2835_CLOCK_DSI1P] = REGISTER_DSI1_CLK( ++ .name = "dsi1p", ++ .ctl_reg = CM_DSI1PCTL, ++ .div_reg = CM_DSI1PDIV, ++ .int_bits = 0, ++ .frac_bits = 0), + + /* the gates */ + +@@ -1962,8 +2048,19 @@ static int bcm2835_clk_probe(struct plat + if (IS_ERR(cprman->regs)) + return PTR_ERR(cprman->regs); + +- cprman->osc_name = of_clk_get_parent_name(dev->of_node, 0); +- if (!cprman->osc_name) ++ memcpy(cprman->real_parent_names, cprman_parent_names, ++ sizeof(cprman_parent_names)); ++ of_clk_parent_fill(dev->of_node, cprman->real_parent_names, ++ ARRAY_SIZE(cprman_parent_names)); ++ ++ /* ++ * Make sure the external oscillator has been registered. ++ * ++ * The other (DSI) clocks are not present on older device ++ * trees, which we still need to support for backwards ++ * compatibility. ++ */ ++ if (!cprman->real_parent_names[0]) + return -ENODEV; + + platform_set_drvdata(pdev, cprman); +--- a/include/dt-bindings/clock/bcm2835.h ++++ b/include/dt-bindings/clock/bcm2835.h +@@ -64,3 +64,5 @@ + #define BCM2835_CLOCK_CAM1 46 + #define BCM2835_CLOCK_DSI0E 47 + #define BCM2835_CLOCK_DSI1E 48 ++#define BCM2835_CLOCK_DSI0P 49 ++#define BCM2835_CLOCK_DSI1P 50 diff --git a/target/linux/brcm2708/patches-4.9/950-0157-clk-bcm2835-Add-leaf-clock-measurement-support-disab.patch b/target/linux/brcm2708/patches-4.9/950-0157-clk-bcm2835-Add-leaf-clock-measurement-support-disab.patch new file mode 100644 index 000000000000..16c5ec5cbf54 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0157-clk-bcm2835-Add-leaf-clock-measurement-support-disab.patch @@ -0,0 +1,346 @@ +From 546bac0479e51024027f8c8820f912573643b101 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 18 Jan 2017 07:31:57 +1100 +Subject: [PATCH] clk: bcm2835: Add leaf clock measurement support, disabled by + default + +This proved incredibly useful during debugging of the DSI driver, to +see if our clocks were running at rate we requested. Let's leave it +here for the next person interacting with clocks on the platform (and +so that hopefully we can just hook it up to debugfs some day). + +Signed-off-by: Eric Anholt +Signed-off-by: Stephen Boyd +(cherry picked from commit 3f9195811d8d829556c4cd88d3f9e56a80d5ba60) +--- + drivers/clk/bcm/clk-bcm2835.c | 144 ++++++++++++++++++++++++++++++++++-------- + 1 file changed, 119 insertions(+), 25 deletions(-) + +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -39,6 +39,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -98,7 +99,8 @@ + #define CM_SMIDIV 0x0b4 + /* no definition for 0x0b8 and 0x0bc */ + #define CM_TCNTCTL 0x0c0 +-#define CM_TCNTDIV 0x0c4 ++# define CM_TCNT_SRC1_SHIFT 12 ++#define CM_TCNTCNT 0x0c4 + #define CM_TECCTL 0x0c8 + #define CM_TECDIV 0x0cc + #define CM_TD0CTL 0x0d0 +@@ -338,6 +340,61 @@ static inline u32 cprman_read(struct bcm + return readl(cprman->regs + reg); + } + ++/* Does a cycle of measuring a clock through the TCNT clock, which may ++ * source from many other clocks in the system. ++ */ ++static unsigned long bcm2835_measure_tcnt_mux(struct bcm2835_cprman *cprman, ++ u32 tcnt_mux) ++{ ++ u32 osccount = 19200; /* 1ms */ ++ u32 count; ++ ktime_t timeout; ++ ++ spin_lock(&cprman->regs_lock); ++ ++ cprman_write(cprman, CM_TCNTCTL, CM_KILL); ++ ++ cprman_write(cprman, CM_TCNTCTL, ++ (tcnt_mux & CM_SRC_MASK) | ++ (tcnt_mux >> CM_SRC_BITS) << CM_TCNT_SRC1_SHIFT); ++ ++ cprman_write(cprman, CM_OSCCOUNT, osccount); ++ ++ /* do a kind delay at the start */ ++ mdelay(1); ++ ++ /* Finish off whatever is left of OSCCOUNT */ ++ timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS); ++ while (cprman_read(cprman, CM_OSCCOUNT)) { ++ if (ktime_after(ktime_get(), timeout)) { ++ dev_err(cprman->dev, "timeout waiting for OSCCOUNT\n"); ++ count = 0; ++ goto out; ++ } ++ cpu_relax(); ++ } ++ ++ /* Wait for BUSY to clear. */ ++ timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS); ++ while (cprman_read(cprman, CM_TCNTCTL) & CM_BUSY) { ++ if (ktime_after(ktime_get(), timeout)) { ++ dev_err(cprman->dev, "timeout waiting for !BUSY\n"); ++ count = 0; ++ goto out; ++ } ++ cpu_relax(); ++ } ++ ++ count = cprman_read(cprman, CM_TCNTCNT); ++ ++ cprman_write(cprman, CM_TCNTCTL, 0); ++ ++out: ++ spin_unlock(&cprman->regs_lock); ++ ++ return count * 1000; ++} ++ + static int bcm2835_debugfs_regset(struct bcm2835_cprman *cprman, u32 base, + struct debugfs_reg32 *regs, size_t nregs, + struct dentry *dentry) +@@ -473,6 +530,8 @@ struct bcm2835_clock_data { + + bool is_vpu_clock; + bool is_mash_clock; ++ ++ u32 tcnt_mux; + }; + + struct bcm2835_gate_data { +@@ -1008,6 +1067,17 @@ static int bcm2835_clock_on(struct clk_h + CM_GATE); + spin_unlock(&cprman->regs_lock); + ++ /* Debug code to measure the clock once it's turned on to see ++ * if it's ticking at the rate we expect. ++ */ ++ if (data->tcnt_mux && false) { ++ dev_info(cprman->dev, ++ "clk %s: rate %ld, measure %ld\n", ++ data->name, ++ clk_hw_get_rate(hw), ++ bcm2835_measure_tcnt_mux(cprman, data->tcnt_mux)); ++ } ++ + return 0; + } + +@@ -1774,7 +1844,8 @@ static const struct bcm2835_clk_desc clk + .ctl_reg = CM_OTPCTL, + .div_reg = CM_OTPDIV, + .int_bits = 4, +- .frac_bits = 0), ++ .frac_bits = 0, ++ .tcnt_mux = 6), + /* + * Used for a 1Mhz clock for the system clocksource, and also used + * bythe watchdog timer and the camera pulse generator. +@@ -1808,13 +1879,15 @@ static const struct bcm2835_clk_desc clk + .ctl_reg = CM_H264CTL, + .div_reg = CM_H264DIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 1), + [BCM2835_CLOCK_ISP] = REGISTER_VPU_CLK( + .name = "isp", + .ctl_reg = CM_ISPCTL, + .div_reg = CM_ISPDIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 2), + + /* + * Secondary SDRAM clock. Used for low-voltage modes when the PLL +@@ -1825,13 +1898,15 @@ static const struct bcm2835_clk_desc clk + .ctl_reg = CM_SDCCTL, + .div_reg = CM_SDCDIV, + .int_bits = 6, +- .frac_bits = 0), ++ .frac_bits = 0, ++ .tcnt_mux = 3), + [BCM2835_CLOCK_V3D] = REGISTER_VPU_CLK( + .name = "v3d", + .ctl_reg = CM_V3DCTL, + .div_reg = CM_V3DDIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 4), + /* + * VPU clock. This doesn't have an enable bit, since it drives + * the bus for everything else, and is special so it doesn't need +@@ -1845,7 +1920,8 @@ static const struct bcm2835_clk_desc clk + .int_bits = 12, + .frac_bits = 8, + .flags = CLK_IS_CRITICAL, +- .is_vpu_clock = true), ++ .is_vpu_clock = true, ++ .tcnt_mux = 5), + + /* clocks with per parent mux */ + [BCM2835_CLOCK_AVEO] = REGISTER_PER_CLK( +@@ -1853,19 +1929,22 @@ static const struct bcm2835_clk_desc clk + .ctl_reg = CM_AVEOCTL, + .div_reg = CM_AVEODIV, + .int_bits = 4, +- .frac_bits = 0), ++ .frac_bits = 0, ++ .tcnt_mux = 38), + [BCM2835_CLOCK_CAM0] = REGISTER_PER_CLK( + .name = "cam0", + .ctl_reg = CM_CAM0CTL, + .div_reg = CM_CAM0DIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 14), + [BCM2835_CLOCK_CAM1] = REGISTER_PER_CLK( + .name = "cam1", + .ctl_reg = CM_CAM1CTL, + .div_reg = CM_CAM1DIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 15), + [BCM2835_CLOCK_DFT] = REGISTER_PER_CLK( + .name = "dft", + .ctl_reg = CM_DFTCTL, +@@ -1877,7 +1956,8 @@ static const struct bcm2835_clk_desc clk + .ctl_reg = CM_DPICTL, + .div_reg = CM_DPIDIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 17), + + /* Arasan EMMC clock */ + [BCM2835_CLOCK_EMMC] = REGISTER_PER_CLK( +@@ -1885,7 +1965,8 @@ static const struct bcm2835_clk_desc clk + .ctl_reg = CM_EMMCCTL, + .div_reg = CM_EMMCDIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 39), + + /* General purpose (GPIO) clocks */ + [BCM2835_CLOCK_GP0] = REGISTER_PER_CLK( +@@ -1894,7 +1975,8 @@ static const struct bcm2835_clk_desc clk + .div_reg = CM_GP0DIV, + .int_bits = 12, + .frac_bits = 12, +- .is_mash_clock = true), ++ .is_mash_clock = true, ++ .tcnt_mux = 20), + [BCM2835_CLOCK_GP1] = REGISTER_PER_CLK( + .name = "gp1", + .ctl_reg = CM_GP1CTL, +@@ -1902,7 +1984,8 @@ static const struct bcm2835_clk_desc clk + .int_bits = 12, + .frac_bits = 12, + .flags = CLK_IS_CRITICAL, +- .is_mash_clock = true), ++ .is_mash_clock = true, ++ .tcnt_mux = 21), + [BCM2835_CLOCK_GP2] = REGISTER_PER_CLK( + .name = "gp2", + .ctl_reg = CM_GP2CTL, +@@ -1917,40 +2000,46 @@ static const struct bcm2835_clk_desc clk + .ctl_reg = CM_HSMCTL, + .div_reg = CM_HSMDIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 22), + [BCM2835_CLOCK_PCM] = REGISTER_PER_CLK( + .name = "pcm", + .ctl_reg = CM_PCMCTL, + .div_reg = CM_PCMDIV, + .int_bits = 12, + .frac_bits = 12, +- .is_mash_clock = true), ++ .is_mash_clock = true, ++ .tcnt_mux = 23), + [BCM2835_CLOCK_PWM] = REGISTER_PER_CLK( + .name = "pwm", + .ctl_reg = CM_PWMCTL, + .div_reg = CM_PWMDIV, + .int_bits = 12, + .frac_bits = 12, +- .is_mash_clock = true), ++ .is_mash_clock = true, ++ .tcnt_mux = 24), + [BCM2835_CLOCK_SLIM] = REGISTER_PER_CLK( + .name = "slim", + .ctl_reg = CM_SLIMCTL, + .div_reg = CM_SLIMDIV, + .int_bits = 12, + .frac_bits = 12, +- .is_mash_clock = true), ++ .is_mash_clock = true, ++ .tcnt_mux = 25), + [BCM2835_CLOCK_SMI] = REGISTER_PER_CLK( + .name = "smi", + .ctl_reg = CM_SMICTL, + .div_reg = CM_SMIDIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 27), + [BCM2835_CLOCK_UART] = REGISTER_PER_CLK( + .name = "uart", + .ctl_reg = CM_UARTCTL, + .div_reg = CM_UARTDIV, + .int_bits = 10, +- .frac_bits = 12), ++ .frac_bits = 12, ++ .tcnt_mux = 28), + + /* TV encoder clock. Only operating frequency is 108Mhz. */ + [BCM2835_CLOCK_VEC] = REGISTER_PER_CLK( +@@ -1963,7 +2052,8 @@ static const struct bcm2835_clk_desc clk + * Allow rate change propagation only on PLLH_AUX which is + * assigned index 7 in the parent array. + */ +- .set_rate_parent = BIT(7)), ++ .set_rate_parent = BIT(7), ++ .tcnt_mux = 29), + + /* dsi clocks */ + [BCM2835_CLOCK_DSI0E] = REGISTER_PER_CLK( +@@ -1971,25 +2061,29 @@ static const struct bcm2835_clk_desc clk + .ctl_reg = CM_DSI0ECTL, + .div_reg = CM_DSI0EDIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 18), + [BCM2835_CLOCK_DSI1E] = REGISTER_PER_CLK( + .name = "dsi1e", + .ctl_reg = CM_DSI1ECTL, + .div_reg = CM_DSI1EDIV, + .int_bits = 4, +- .frac_bits = 8), ++ .frac_bits = 8, ++ .tcnt_mux = 19), + [BCM2835_CLOCK_DSI0P] = REGISTER_DSI0_CLK( + .name = "dsi0p", + .ctl_reg = CM_DSI0PCTL, + .div_reg = CM_DSI0PDIV, + .int_bits = 0, +- .frac_bits = 0), ++ .frac_bits = 0, ++ .tcnt_mux = 12), + [BCM2835_CLOCK_DSI1P] = REGISTER_DSI1_CLK( + .name = "dsi1p", + .ctl_reg = CM_DSI1PCTL, + .div_reg = CM_DSI1PDIV, + .int_bits = 0, +- .frac_bits = 0), ++ .frac_bits = 0, ++ .tcnt_mux = 13), + + /* the gates */ + diff --git a/target/linux/brcm2708/patches-4.9/950-0158-drm-panel-Add-support-for-the-Raspberry-Pi-7-Touchsc.patch b/target/linux/brcm2708/patches-4.9/950-0158-drm-panel-Add-support-for-the-Raspberry-Pi-7-Touchsc.patch new file mode 100644 index 000000000000..027e5c07e5c0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0158-drm-panel-Add-support-for-the-Raspberry-Pi-7-Touchsc.patch @@ -0,0 +1,575 @@ +From e2d195723ec030733cdaf623c9419af5f308b230 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Tue, 26 Apr 2016 13:46:13 -0700 +Subject: [PATCH] drm/panel: Add support for the Raspberry Pi 7" Touchscreen. + +This driver communicates with the Atmel microcontroller for sequencing +the poweron of the TC358762 DSI-DPI bridge and controlling the +backlight PWM. + +The following lines are required in config.txt, to keep the firmware +from trying to bash our I2C lines and steal the DSI interrupts: + + disable_touchscreen=1 + ignore_lcd=2 + mask_gpu_interrupt1=0x1000 + +This means that the firmware won't power on the panel at boot time (no +rainbow) and the touchscreen input won't work. The native input +driver for the touchscreen still needs to be written. + +v2: Set the same default orientation as the closed source firmware + used, which is the best for viewing angle. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/panel/Kconfig | 8 + + drivers/gpu/drm/panel/Makefile | 1 + + .../gpu/drm/panel/panel-raspberrypi-touchscreen.c | 514 +++++++++++++++++++++ + 3 files changed, 523 insertions(+) + create mode 100644 drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c + +--- a/drivers/gpu/drm/panel/Kconfig ++++ b/drivers/gpu/drm/panel/Kconfig +@@ -52,6 +52,14 @@ config DRM_PANEL_PANASONIC_VVX10F034N00 + WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some + Xperia Z2 tablets + ++config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN ++ tristate "Raspberry Pi 7-inch touchscreen panel" ++ depends on DRM_MIPI_DSI ++ help ++ Say Y here if you want to enable support for the Raspberry ++ Pi 7" Touchscreen. To compile this driver as a module, ++ choose M here. ++ + config DRM_PANEL_SAMSUNG_S6E8AA0 + tristate "Samsung S6E8AA0 DSI video mode panel" + depends on OF +--- a/drivers/gpu/drm/panel/Makefile ++++ b/drivers/gpu/drm/panel/Makefile +@@ -2,6 +2,7 @@ obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel- + obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o + obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o + obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o ++obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o + obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o + obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o + obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o +--- /dev/null ++++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c +@@ -0,0 +1,514 @@ ++/* ++ * Copyright © 2016 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * Portions of this file (derived from panel-simple.c) are: ++ * ++ * Copyright (C) 2013, NVIDIA Corporation. All rights reserved. ++ * ++ * Permission is hereby granted, free of charge, to any person obtaining a ++ * copy of this software and associated documentation files (the "Software"), ++ * to deal in the Software without restriction, including without limitation ++ * the rights to use, copy, modify, merge, publish, distribute, sub license, ++ * and/or sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following conditions: ++ * ++ * The above copyright notice and this permission notice (including the ++ * next paragraph) shall be included in all copies or substantial portions ++ * of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR ++ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, ++ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL ++ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER ++ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER ++ * DEALINGS IN THE SOFTWARE. ++ */ ++ ++/** ++ * DOC: Raspberry Pi 7" touchscreen panel driver. ++ * ++ * The 7" touchscreen consists of a DPI LCD panel, a Toshiba ++ * TC358762XBG DSI-DPI bridge, and an I2C-connected Atmel ATTINY88-MUR ++ * controlling power management, the LCD PWM, and the touchscreen. ++ * ++ * This driver presents this device as a MIPI DSI panel to the DRM ++ * driver, and should expose the touchscreen as a HID device. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++/* I2C registers of the Atmel microcontroller. */ ++enum REG_ADDR { ++ REG_ID = 0x80, ++ REG_PORTA, // BIT(2) for horizontal flip, BIT(3) for vertical flip ++ REG_PORTB, ++ REG_PORTC, ++ REG_PORTD, ++ REG_POWERON, ++ REG_PWM, ++ REG_DDRA, ++ REG_DDRB, ++ REG_DDRC, ++ REG_DDRD, ++ REG_TEST, ++ REG_WR_ADDRL, ++ REG_WR_ADDRH, ++ REG_READH, ++ REG_READL, ++ REG_WRITEH, ++ REG_WRITEL, ++ REG_ID2, ++}; ++ ++/* We only turn the PWM on or off, without varying values. */ ++#define RPI_TOUCHSCREEN_MAX_BRIGHTNESS 1 ++ ++/* DSI D-PHY Layer Registers */ ++#define D0W_DPHYCONTTX 0x0004 ++#define CLW_DPHYCONTRX 0x0020 ++#define D0W_DPHYCONTRX 0x0024 ++#define D1W_DPHYCONTRX 0x0028 ++#define COM_DPHYCONTRX 0x0038 ++#define CLW_CNTRL 0x0040 ++#define D0W_CNTRL 0x0044 ++#define D1W_CNTRL 0x0048 ++#define DFTMODE_CNTRL 0x0054 ++ ++/* DSI PPI Layer Registers */ ++#define PPI_STARTPPI 0x0104 ++#define PPI_BUSYPPI 0x0108 ++#define PPI_LINEINITCNT 0x0110 ++#define PPI_LPTXTIMECNT 0x0114 ++//#define PPI_LANEENABLE 0x0134 ++//#define PPI_TX_RX_TA 0x013C ++#define PPI_CLS_ATMR 0x0140 ++#define PPI_D0S_ATMR 0x0144 ++#define PPI_D1S_ATMR 0x0148 ++#define PPI_D0S_CLRSIPOCOUNT 0x0164 ++#define PPI_D1S_CLRSIPOCOUNT 0x0168 ++#define CLS_PRE 0x0180 ++#define D0S_PRE 0x0184 ++#define D1S_PRE 0x0188 ++#define CLS_PREP 0x01A0 ++#define D0S_PREP 0x01A4 ++#define D1S_PREP 0x01A8 ++#define CLS_ZERO 0x01C0 ++#define D0S_ZERO 0x01C4 ++#define D1S_ZERO 0x01C8 ++#define PPI_CLRFLG 0x01E0 ++#define PPI_CLRSIPO 0x01E4 ++#define HSTIMEOUT 0x01F0 ++#define HSTIMEOUTENABLE 0x01F4 ++ ++/* DSI Protocol Layer Registers */ ++#define DSI_STARTDSI 0x0204 ++#define DSI_BUSYDSI 0x0208 ++#define DSI_LANEENABLE 0x0210 ++# define DSI_LANEENABLE_CLOCK BIT(0) ++# define DSI_LANEENABLE_D0 BIT(1) ++# define DSI_LANEENABLE_D1 BIT(2) ++ ++#define DSI_LANESTATUS0 0x0214 ++#define DSI_LANESTATUS1 0x0218 ++#define DSI_INTSTATUS 0x0220 ++#define DSI_INTMASK 0x0224 ++#define DSI_INTCLR 0x0228 ++#define DSI_LPTXTO 0x0230 ++#define DSI_MODE 0x0260 ++#define DSI_PAYLOAD0 0x0268 ++#define DSI_PAYLOAD1 0x026C ++#define DSI_SHORTPKTDAT 0x0270 ++#define DSI_SHORTPKTREQ 0x0274 ++#define DSI_BTASTA 0x0278 ++#define DSI_BTACLR 0x027C ++ ++/* DSI General Registers */ ++#define DSIERRCNT 0x0300 ++#define DSISIGMOD 0x0304 ++ ++/* DSI Application Layer Registers */ ++#define APLCTRL 0x0400 ++#define APLSTAT 0x0404 ++#define APLERR 0x0408 ++#define PWRMOD 0x040C ++#define RDPKTLN 0x0410 ++#define PXLFMT 0x0414 ++#define MEMWRCMD 0x0418 ++ ++/* LCDC/DPI Host Registers */ ++#define LCDCTRL 0x0420 ++#define HSR 0x0424 ++#define HDISPR 0x0428 ++#define VSR 0x042C ++#define VDISPR 0x0430 ++#define VFUEN 0x0434 ++ ++/* DBI-B Host Registers */ ++#define DBIBCTRL 0x0440 ++ ++/* SPI Master Registers */ ++#define SPICMR 0x0450 ++#define SPITCR 0x0454 ++ ++/* System Controller Registers */ ++#define SYSSTAT 0x0460 ++#define SYSCTRL 0x0464 ++#define SYSPLL1 0x0468 ++#define SYSPLL2 0x046C ++#define SYSPLL3 0x0470 ++#define SYSPMCTRL 0x047C ++ ++/* GPIO Registers */ ++#define GPIOC 0x0480 ++#define GPIOO 0x0484 ++#define GPIOI 0x0488 ++ ++/* I2C Registers */ ++#define I2CCLKCTRL 0x0490 ++ ++/* Chip/Rev Registers */ ++#define IDREG 0x04A0 ++ ++/* Debug Registers */ ++#define WCMDQUEUE 0x0500 ++#define RCMDQUEUE 0x0504 ++ ++struct rpi_touchscreen { ++ struct drm_panel base; ++ struct mipi_dsi_device *dsi; ++ struct i2c_client *bridge_i2c; ++ ++ /* Version of the firmware on the bridge chip */ ++ int atmel_ver; ++}; ++ ++static const struct drm_display_mode rpi_touchscreen_modes[] = { ++ { ++ /* The DSI PLL can only integer divide from the 2Ghz ++ * PLLD, giving us few choices. We pick a divide by 3 ++ * as our DSI HS clock, giving us a pixel clock of ++ * that divided by 24 bits. Pad out HFP to get our ++ * panel to refresh at 60Hz, even if that doesn't ++ * match the datasheet. ++ */ ++#define PIXEL_CLOCK ((2000000000 / 3) / 24) ++#define VREFRESH 60 ++#define VTOTAL (480 + 7 + 2 + 21) ++#define HACT 800 ++#define HSW 2 ++#define HBP 46 ++#define HFP ((PIXEL_CLOCK / (VTOTAL * VREFRESH)) - (HACT + HSW + HBP)) ++ ++ .clock = PIXEL_CLOCK / 1000, ++ .hdisplay = HACT, ++ .hsync_start = HACT + HFP, ++ .hsync_end = HACT + HFP + HSW, ++ .htotal = HACT + HFP + HSW + HBP, ++ .vdisplay = 480, ++ .vsync_start = 480 + 7, ++ .vsync_end = 480 + 7 + 2, ++ .vtotal = VTOTAL, ++ .vrefresh = 60, ++ }, ++}; ++ ++static struct rpi_touchscreen *panel_to_ts(struct drm_panel *panel) ++{ ++ return container_of(panel, struct rpi_touchscreen, base); ++} ++ ++static u8 rpi_touchscreen_i2c_read(struct rpi_touchscreen *ts, u8 reg) ++{ ++ return i2c_smbus_read_byte_data(ts->bridge_i2c, reg); ++} ++ ++static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts, ++ u8 reg, u8 val) ++{ ++ int ret; ++ ++ ret = i2c_smbus_write_byte_data(ts->bridge_i2c, reg, val); ++ if (ret) ++ dev_err(&ts->dsi->dev, "I2C write failed: %d\n", ret); ++} ++ ++static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val) ++{ ++#if 0 ++ /* The firmware uses LP DSI transactions like this to bring up ++ * the hardware, which should be faster than using I2C to then ++ * pass to the Toshiba. However, I was unable to get it to ++ * work. ++ */ ++ u8 msg[] = { ++ reg, ++ reg >> 8, ++ val, ++ val >> 8, ++ val >> 16, ++ val >> 24, ++ }; ++ ++ mipi_dsi_dcs_write_buffer(ts->dsi, msg, sizeof(msg)); ++#else ++ rpi_touchscreen_i2c_write(ts, REG_WR_ADDRH, reg >> 8); ++ rpi_touchscreen_i2c_write(ts, REG_WR_ADDRL, reg); ++ rpi_touchscreen_i2c_write(ts, REG_WRITEH, val >> 8); ++ rpi_touchscreen_i2c_write(ts, REG_WRITEL, val); ++#endif ++ ++ return 0; ++} ++ ++static int rpi_touchscreen_disable(struct drm_panel *panel) ++{ ++ struct rpi_touchscreen *ts = panel_to_ts(panel); ++ ++ rpi_touchscreen_i2c_write(ts, REG_PWM, 0); ++ ++ rpi_touchscreen_i2c_write(ts, REG_POWERON, 0); ++ udelay(1); ++ ++ return 0; ++} ++ ++static int rpi_touchscreen_noop(struct drm_panel *panel) ++{ ++ return 0; ++} ++ ++static int rpi_touchscreen_enable(struct drm_panel *panel) ++{ ++ struct rpi_touchscreen *ts = panel_to_ts(panel); ++ int i; ++ ++ rpi_touchscreen_i2c_write(ts, REG_POWERON, 1); ++ /* Wait for nPWRDWN to go low to indicate poweron is done. */ ++ for (i = 0; i < 100; i++) { ++ if (rpi_touchscreen_i2c_read(ts, REG_PORTB) & 1) ++ break; ++ } ++ ++ rpi_touchscreen_write(ts, DSI_LANEENABLE, ++ DSI_LANEENABLE_CLOCK | ++ DSI_LANEENABLE_D0 | ++ (ts->dsi->lanes > 1 ? DSI_LANEENABLE_D1 : 0)); ++ rpi_touchscreen_write(ts, PPI_D0S_CLRSIPOCOUNT, 0x05); ++ rpi_touchscreen_write(ts, PPI_D1S_CLRSIPOCOUNT, 0x05); ++ rpi_touchscreen_write(ts, PPI_D0S_ATMR, 0x00); ++ rpi_touchscreen_write(ts, PPI_D1S_ATMR, 0x00); ++ rpi_touchscreen_write(ts, PPI_LPTXTIMECNT, 0x03); ++ ++ rpi_touchscreen_write(ts, SPICMR, 0x00); ++ rpi_touchscreen_write(ts, LCDCTRL, 0x00100150); ++ rpi_touchscreen_write(ts, SYSCTRL, 0x040f); ++ msleep(100); ++ ++ rpi_touchscreen_write(ts, PPI_STARTPPI, 0x01); ++ rpi_touchscreen_write(ts, DSI_STARTDSI, 0x01); ++ msleep(100); ++ ++ /* Turn on the backlight. */ ++ rpi_touchscreen_i2c_write(ts, REG_PWM, 255); ++ ++ /* Default to the same orientation as the closed source ++ * firmware used for the panel. Runtime rotation ++ * configuration will be supported using VC4's plane ++ * orientation bits. ++ */ ++ rpi_touchscreen_i2c_write(ts, REG_PORTA, BIT(2)); ++ ++ return 0; ++} ++ ++static int rpi_touchscreen_get_modes(struct drm_panel *panel) ++{ ++ struct drm_connector *connector = panel->connector; ++ struct drm_device *drm = panel->drm; ++ unsigned int i, num = 0; ++ ++ for (i = 0; i < ARRAY_SIZE(rpi_touchscreen_modes); i++) { ++ const struct drm_display_mode *m = &rpi_touchscreen_modes[i]; ++ struct drm_display_mode *mode; ++ ++ mode = drm_mode_duplicate(drm, m); ++ if (!mode) { ++ dev_err(drm->dev, "failed to add mode %ux%u@%u\n", ++ m->hdisplay, m->vdisplay, m->vrefresh); ++ continue; ++ } ++ ++ mode->type |= DRM_MODE_TYPE_DRIVER; ++ ++ if (i == 0) ++ mode->type |= DRM_MODE_TYPE_PREFERRED; ++ ++ drm_mode_set_name(mode); ++ ++ drm_mode_probed_add(connector, mode); ++ num++; ++ } ++ ++ connector->display_info.bpc = 8; ++ connector->display_info.width_mm = 154; ++ connector->display_info.height_mm = 86; ++ ++ return num; ++} ++ ++static const struct drm_panel_funcs rpi_touchscreen_funcs = { ++ .disable = rpi_touchscreen_disable, ++ .unprepare = rpi_touchscreen_noop, ++ .prepare = rpi_touchscreen_noop, ++ .enable = rpi_touchscreen_enable, ++ .get_modes = rpi_touchscreen_get_modes, ++}; ++ ++static struct i2c_client *rpi_touchscreen_get_i2c(struct device *dev, ++ const char *name) ++{ ++ struct device_node *node; ++ struct i2c_client *client; ++ ++ node = of_parse_phandle(dev->of_node, name, 0); ++ if (!node) ++ return ERR_PTR(-ENODEV); ++ ++ client = of_find_i2c_device_by_node(node); ++ ++ of_node_put(node); ++ ++ return client; ++} ++ ++static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi) ++{ ++ struct device *dev = &dsi->dev; ++ struct rpi_touchscreen *ts; ++ int ret, ver; ++ ++ ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); ++ if (!ts) ++ return -ENOMEM; ++ ++ dev_set_drvdata(dev, ts); ++ ++ ts->dsi = dsi; ++ dsi->mode_flags = (MIPI_DSI_MODE_VIDEO | ++ MIPI_DSI_MODE_VIDEO_SYNC_PULSE | ++ MIPI_DSI_MODE_LPM); ++ dsi->format = MIPI_DSI_FMT_RGB888; ++ dsi->lanes = 1; ++ ++ ts->bridge_i2c = ++ rpi_touchscreen_get_i2c(dev, "raspberrypi,touchscreen-bridge"); ++ if (IS_ERR(ts->bridge_i2c)) { ++ ret = -EPROBE_DEFER; ++ return ret; ++ } ++ ++ ver = rpi_touchscreen_i2c_read(ts, REG_ID); ++ if (ver < 0) { ++ dev_err(dev, "Atmel I2C read failed: %d\n", ver); ++ return -ENODEV; ++ } ++ ++ switch (ver) { ++ case 0xde: ++ ts->atmel_ver = 1; ++ break; ++ case 0xc3: ++ ts->atmel_ver = 2; ++ break; ++ default: ++ dev_err(dev, "Unknown Atmel firmware revision: 0x%02x\n", ver); ++ return -ENODEV; ++ } ++ ++ /* Turn off at boot, so we can cleanly sequence powering on. */ ++ rpi_touchscreen_i2c_write(ts, REG_POWERON, 0); ++ ++ drm_panel_init(&ts->base); ++ ts->base.dev = dev; ++ ts->base.funcs = &rpi_touchscreen_funcs; ++ ++ ret = drm_panel_add(&ts->base); ++ if (ret < 0) ++ goto err_release_bridge; ++ ++ return mipi_dsi_attach(dsi); ++ ++err_release_bridge: ++ put_device(&ts->bridge_i2c->dev); ++ return ret; ++} ++ ++static int rpi_touchscreen_dsi_remove(struct mipi_dsi_device *dsi) ++{ ++ struct device *dev = &dsi->dev; ++ struct rpi_touchscreen *ts = dev_get_drvdata(dev); ++ int ret; ++ ++ ret = mipi_dsi_detach(dsi); ++ if (ret < 0) { ++ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret); ++ return ret; ++ } ++ ++ drm_panel_detach(&ts->base); ++ drm_panel_remove(&ts->base); ++ ++ put_device(&ts->bridge_i2c->dev); ++ ++ return 0; ++} ++ ++static void rpi_touchscreen_dsi_shutdown(struct mipi_dsi_device *dsi) ++{ ++ struct device *dev = &dsi->dev; ++ struct rpi_touchscreen *ts = dev_get_drvdata(dev); ++ ++ rpi_touchscreen_i2c_write(ts, REG_POWERON, 0); ++} ++ ++static const struct of_device_id rpi_touchscreen_of_match[] = { ++ { .compatible = "raspberrypi,touchscreen" }, ++ { } /* sentinel */ ++}; ++MODULE_DEVICE_TABLE(of, rpi_touchscreen_of_match); ++ ++static struct mipi_dsi_driver rpi_touchscreen_driver = { ++ .driver = { ++ .name = "raspberrypi-touchscreen", ++ .of_match_table = rpi_touchscreen_of_match, ++ }, ++ .probe = rpi_touchscreen_dsi_probe, ++ .remove = rpi_touchscreen_dsi_remove, ++ .shutdown = rpi_touchscreen_dsi_shutdown, ++}; ++module_mipi_dsi_driver(rpi_touchscreen_driver); ++ ++MODULE_AUTHOR("Eric Anholt "); ++MODULE_DESCRIPTION("Raspberry Pi 7-inch touchscreen driver"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/950-0159-BCM270X-Add-the-DSI-panel-to-the-defconfig.patch b/target/linux/brcm2708/patches-4.9/950-0159-BCM270X-Add-the-DSI-panel-to-the-defconfig.patch new file mode 100644 index 000000000000..1ba605bc39c9 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0159-BCM270X-Add-the-DSI-panel-to-the-defconfig.patch @@ -0,0 +1,45 @@ +From 22f86bb2d3cb5275877fc4784d2f6c4f5cc660e9 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 2 Jun 2016 12:29:45 -0700 +Subject: [PATCH] BCM270X: Add the DSI panel to the defconfig. + +Signed-off-by: Eric Anholt +--- + arch/arm/configs/bcm2709_defconfig | 2 ++ + arch/arm/configs/bcmrpi_defconfig | 2 ++ + arch/arm64/configs/bcmrpi3_defconfig | 2 ++ + 3 files changed, 6 insertions(+) + +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -833,6 +833,8 @@ CONFIG_VIDEO_OV7640=m + CONFIG_VIDEO_MT9V011=m + CONFIG_DRM=m + CONFIG_DRM_LOAD_EDID_FIRMWARE=y ++CONFIG_DRM_PANEL_SIMPLE=m ++CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m + CONFIG_DRM_UDL=m + CONFIG_DRM_VC4=m + CONFIG_FB=y +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -827,6 +827,8 @@ CONFIG_VIDEO_OV7640=m + CONFIG_VIDEO_MT9V011=m + CONFIG_DRM=m + CONFIG_DRM_LOAD_EDID_FIRMWARE=y ++CONFIG_DRM_PANEL_SIMPLE=m ++CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m + CONFIG_DRM_UDL=m + CONFIG_DRM_VC4=m + CONFIG_FB=y +--- a/arch/arm64/configs/bcmrpi3_defconfig ++++ b/arch/arm64/configs/bcmrpi3_defconfig +@@ -816,6 +816,8 @@ CONFIG_VIDEO_OV7640=m + CONFIG_VIDEO_MT9V011=m + CONFIG_DRM=m + CONFIG_DRM_LOAD_EDID_FIRMWARE=y ++CONFIG_DRM_PANEL_SIMPLE=m ++CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m + CONFIG_DRM_UDL=m + CONFIG_DRM_VC4=m + CONFIG_FB=y diff --git a/target/linux/brcm2708/patches-4.9/950-0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch b/target/linux/brcm2708/patches-4.9/950-0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch new file mode 100644 index 000000000000..444c287eedf1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch @@ -0,0 +1,101 @@ +From fc25cd03ca1c696dacb74d2006c0f176ce800566 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Tue, 13 Dec 2016 15:15:10 -0800 +Subject: [PATCH] ARM: bcm2835: dt: Add the DSI module nodes and clocks. + +The modules stay disabled by default, and if you want to enable DSI +you'll need an overlay that connects a panel to it. + +Signed-off-by: Eric Anholt +--- + arch/arm/boot/dts/bcm2835-rpi.dtsi | 8 +++++++ + arch/arm/boot/dts/bcm283x.dtsi | 49 +++++++++++++++++++++++++++++++++++--- + 2 files changed, 54 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi +@@ -84,3 +84,11 @@ + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; + }; ++ ++&dsi0 { ++ power-domains = <&power RPI_POWER_DOMAIN_DSI0>; ++}; ++ ++&dsi1 { ++ power-domains = <&power RPI_POWER_DOMAIN_DSI1>; ++}; +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -93,10 +93,13 @@ + #clock-cells = <1>; + reg = <0x7e101000 0x2000>; + +- /* CPRMAN derives everything from the platform's +- * oscillator. ++ /* CPRMAN derives almost everything from the ++ * platform's oscillator. However, the DSI ++ * pixel clocks come from the DSI analog PHY. + */ +- clocks = <&clk_osc>; ++ clocks = <&clk_osc>, ++ <&dsi0 0>, <&dsi0 1>, <&dsi0 2>, ++ <&dsi1 0>, <&dsi1 1>, <&dsi1 2>; + }; + + rng@7e104000 { +@@ -188,6 +191,26 @@ + interrupts = <2 14>; /* pwa1 */ + }; + ++ dsi0: dsi@7e209000 { ++ compatible = "brcm,bcm2835-dsi0"; ++ reg = <0x7e209000 0x78>; ++ interrupts = <2 4>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ #clock-cells = <1>; ++ ++ clocks = <&clocks BCM2835_PLLA_DSI0>, ++ <&clocks BCM2835_CLOCK_DSI0E>, ++ <&clocks BCM2835_CLOCK_DSI0P>; ++ clock-names = "phy", "escape", "pixel"; ++ ++ clock-output-names = "dsi0_byte", ++ "dsi0_ddr2", ++ "dsi0_ddr"; ++ ++ status = "disabled"; ++ }; ++ + aux: aux@0x7e215000 { + compatible = "brcm,bcm2835-aux"; + #clock-cells = <1>; +@@ -247,6 +270,26 @@ + interrupts = <2 1>; + }; + ++ dsi1: dsi@7e700000 { ++ compatible = "brcm,bcm2835-dsi1"; ++ reg = <0x7e700000 0x8c>; ++ interrupts = <2 12>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ #clock-cells = <1>; ++ ++ clocks = <&clocks BCM2835_PLLD_DSI1>, ++ <&clocks BCM2835_CLOCK_DSI1E>, ++ <&clocks BCM2835_CLOCK_DSI1P>; ++ clock-names = "phy", "escape", "pixel"; ++ ++ clock-output-names = "dsi1_byte", ++ "dsi1_ddr2", ++ "dsi1_ddr"; ++ ++ status = "disabled"; ++ }; ++ + i2c1: i2c@7e804000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e804000 0x1000>; diff --git a/target/linux/brcm2708/patches-4.9/950-0161-BCM270X-Enable-the-DSI-panel-node-in-the-VC4-overlay.patch b/target/linux/brcm2708/patches-4.9/950-0161-BCM270X-Enable-the-DSI-panel-node-in-the-VC4-overlay.patch new file mode 100644 index 000000000000..3d65f5e2690e --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0161-BCM270X-Enable-the-DSI-panel-node-in-the-VC4-overlay.patch @@ -0,0 +1,138 @@ +From 2c62d430b6b3c20867e55465e0557a1543088f09 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 2 Jun 2016 15:09:35 -0700 +Subject: [PATCH] BCM270X: Enable the DSI panel node in the VC4 overlay. + +Signed-off-by: Eric Anholt +--- + arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 5 ++++ + arch/arm/boot/dts/bcm2708-rpi-b.dts | 5 ++++ + arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 5 ++++ + arch/arm/boot/dts/bcm270x.dtsi | 27 ++++++++++++++++++++++ + arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 5 ++++ + arch/arm/boot/dts/bcm2710.dtsi | 1 - + arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 22 ++++++++++++++++++ + 7 files changed, 69 insertions(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts +@@ -154,3 +154,8 @@ + sd_debug = <&sdhost>,"brcm,debug"; + }; + }; ++ ++&i2c_dsi { ++ gpios = <&gpio 28 0 ++ &gpio 29 0>; ++}; +--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts +@@ -144,3 +144,8 @@ + sd_debug = <&sdhost>,"brcm,debug"; + }; + }; ++ ++&i2c_dsi { ++ gpios = <&gpio 2 0 ++ &gpio 3 0>; ++}; +--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts ++++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts +@@ -154,3 +154,8 @@ + sd_debug = <&sdhost>,"brcm,debug"; + }; + }; ++ ++&i2c_dsi { ++ gpios = <&gpio 28 0 ++ &gpio 29 0>; ++}; +--- a/arch/arm/boot/dts/bcm270x.dtsi ++++ b/arch/arm/boot/dts/bcm270x.dtsi +@@ -137,6 +137,29 @@ + /* Add alias */ + status = "disabled"; + }; ++ ++ i2c_dsi: i2cdsi { ++ /* We have to use i2c-gpio because the ++ * firmware is also polling another device ++ * using the only hardware I2C bus that could ++ * connect to these pins. ++ */ ++ compatible = "i2c-gpio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ ++ pitouchscreen_bridge: bridge@45 { ++ compatible = "raspberrypi,touchscreen-bridge-i2c"; ++ reg = <0x45>; ++ }; ++ ++ pitouchscreen_touch: bridge@38 { ++ compatible = "raspberrypi,touchscreen-ts-i2c"; ++ reg = <0x38>; ++ }; ++ }; ++ + }; + + vdd_5v0_reg: fixedregulator_5v0 { +@@ -155,3 +178,7 @@ + regulator-always-on; + }; + }; ++ ++&dsi1 { ++ power-domains = <&power RPI_POWER_DOMAIN_DSI1>; ++}; +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -201,3 +201,8 @@ + sd_debug = <&sdhost>,"brcm,debug"; + }; + }; ++ ++&i2c_dsi { ++ gpios = <&gpio 44 0 ++ &gpio 45 0>; ++}; +--- a/arch/arm/boot/dts/bcm2710.dtsi ++++ b/arch/arm/boot/dts/bcm2710.dtsi +@@ -145,4 +145,3 @@ + interrupt-parent = <&local_intc>; + interrupts = <8>; + }; +- +--- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts ++++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts +@@ -126,6 +126,28 @@ + }; + }; + ++ fragment@16 { ++ target = <&dsi1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pitouchscreen: panel@0 { ++ compatible = "raspberrypi,touchscreen"; ++ reg = <0>; ++ raspberrypi,touchscreen-bridge = <&pitouchscreen_bridge>; ++ }; ++ }; ++ }; ++ ++ fragment@17 { ++ target = <&i2c_dsi>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ + __overrides__ { + cma-256 = <0>,"+0-1-2-3-4"; + cma-192 = <0>,"-0+1-2-3-4"; diff --git a/target/linux/brcm2708/patches-4.9/950-0162-drm-vc4-Fix-termination-of-the-initial-scan-for-bran.patch b/target/linux/brcm2708/patches-4.9/950-0162-drm-vc4-Fix-termination-of-the-initial-scan-for-bran.patch new file mode 100644 index 000000000000..3326dca659c0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0162-drm-vc4-Fix-termination-of-the-initial-scan-for-bran.patch @@ -0,0 +1,68 @@ +From 57b0774967d7ea8d4173f82387100a84e4ba05d8 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 20 Oct 2016 16:48:12 -0700 +Subject: [PATCH] drm/vc4: Fix termination of the initial scan for branch + targets. + +The loop is scanning until the original max_ip (size of the BO), but +we want to not examine any code after the PROG_END's delay slots. +There was a block trying to do that, except that we had some early +continue statements if the signal wasn't a PROG_END or a BRANCH. + +The failure mode would be that a valid shader is rejected because some +undefined memory after the PROG_END slots is parsed as a branch and +the rest of its setup is illegal. I haven't seen this in the wild, +but valgrind was complaining when about this up in the userland +simulator mode. + +Signed-off-by: Eric Anholt +(cherry picked from commit 457e67a728696c4f8e6423c64e93def50530db9a) +--- + drivers/gpu/drm/vc4/vc4_validate_shaders.c | 19 ++++++++----------- + 1 file changed, 8 insertions(+), 11 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_validate_shaders.c ++++ b/drivers/gpu/drm/vc4/vc4_validate_shaders.c +@@ -608,9 +608,7 @@ static bool + vc4_validate_branches(struct vc4_shader_validation_state *validation_state) + { + uint32_t max_branch_target = 0; +- bool found_shader_end = false; + int ip; +- int shader_end_ip = 0; + int last_branch = -2; + + for (ip = 0; ip < validation_state->max_ip; ip++) { +@@ -621,8 +619,13 @@ vc4_validate_branches(struct vc4_shader_ + uint32_t branch_target_ip; + + if (sig == QPU_SIG_PROG_END) { +- shader_end_ip = ip; +- found_shader_end = true; ++ /* There are two delay slots after program end is ++ * signaled that are still executed, then we're ++ * finished. validation_state->max_ip is the ++ * instruction after the last valid instruction in the ++ * program. ++ */ ++ validation_state->max_ip = ip + 3; + continue; + } + +@@ -676,15 +679,9 @@ vc4_validate_branches(struct vc4_shader_ + } + set_bit(after_delay_ip, validation_state->branch_targets); + max_branch_target = max(max_branch_target, after_delay_ip); +- +- /* There are two delay slots after program end is signaled +- * that are still executed, then we're finished. +- */ +- if (found_shader_end && ip == shader_end_ip + 2) +- break; + } + +- if (max_branch_target > shader_end_ip) { ++ if (max_branch_target > validation_state->max_ip - 3) { + DRM_ERROR("Branch landed after QPU_SIG_PROG_END"); + return false; + } diff --git a/target/linux/brcm2708/patches-4.9/950-0163-drm-vc4-Add-support-for-rendering-with-ETC1-textures.patch b/target/linux/brcm2708/patches-4.9/950-0163-drm-vc4-Add-support-for-rendering-with-ETC1-textures.patch new file mode 100644 index 000000000000..2b815787689f --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0163-drm-vc4-Add-support-for-rendering-with-ETC1-textures.patch @@ -0,0 +1,55 @@ +From 4b1b99ebbada744ef72af56b022492609feb9bba Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 3 Nov 2016 18:53:10 -0700 +Subject: [PATCH] drm/vc4: Add support for rendering with ETC1 textures. + +The validation for it ends up being quite simple, but I hadn't got +around to it before merging the driver. For backwards compatibility, +we also need to add a flag so that the userspace GL driver can easily +tell if the kernel will allow ETC1 textures (on an old kernel, it will +continue to convert to RGBA8) + +Signed-off-by: Eric Anholt +(cherry picked from commit 7154d76fedf549607afbc0d13db9aaf02da5cebf) +--- + drivers/gpu/drm/vc4/vc4_drv.c | 1 + + drivers/gpu/drm/vc4/vc4_validate.c | 7 +++++++ + include/uapi/drm/vc4_drm.h | 1 + + 3 files changed, 9 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -78,6 +78,7 @@ static int vc4_get_param_ioctl(struct dr + pm_runtime_put(&vc4->v3d->pdev->dev); + break; + case DRM_VC4_PARAM_SUPPORTS_BRANCHES: ++ case DRM_VC4_PARAM_SUPPORTS_ETC1: + args->value = true; + break; + default: +--- a/drivers/gpu/drm/vc4/vc4_validate.c ++++ b/drivers/gpu/drm/vc4/vc4_validate.c +@@ -644,6 +644,13 @@ reloc_tex(struct vc4_exec_info *exec, + cpp = 1; + break; + case VC4_TEXTURE_TYPE_ETC1: ++ /* ETC1 is arranged as 64-bit blocks, where each block is 4x4 ++ * pixels. ++ */ ++ cpp = 8; ++ width = (width + 3) >> 2; ++ height = (height + 3) >> 2; ++ break; + case VC4_TEXTURE_TYPE_BW1: + case VC4_TEXTURE_TYPE_A4: + case VC4_TEXTURE_TYPE_A1: +--- a/include/uapi/drm/vc4_drm.h ++++ b/include/uapi/drm/vc4_drm.h +@@ -286,6 +286,7 @@ struct drm_vc4_get_hang_state { + #define DRM_VC4_PARAM_V3D_IDENT1 1 + #define DRM_VC4_PARAM_V3D_IDENT2 2 + #define DRM_VC4_PARAM_SUPPORTS_BRANCHES 3 ++#define DRM_VC4_PARAM_SUPPORTS_ETC1 4 + + struct drm_vc4_get_param { + __u32 param; diff --git a/target/linux/brcm2708/patches-4.9/950-0164-drm-vc4-Use-runtime-autosuspend-to-avoid-thrashing-V.patch b/target/linux/brcm2708/patches-4.9/950-0164-drm-vc4-Use-runtime-autosuspend-to-avoid-thrashing-V.patch new file mode 100644 index 000000000000..f6d738d94112 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0164-drm-vc4-Use-runtime-autosuspend-to-avoid-thrashing-V.patch @@ -0,0 +1,78 @@ +From 936dc8b00ccd5072c5d610b97199402275bfdf26 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Fri, 4 Nov 2016 15:58:38 -0700 +Subject: [PATCH] drm/vc4: Use runtime autosuspend to avoid thrashing V3D power + state. + +The pm_runtime_put() we were using immediately released power on the +device, which meant that we were generally turning the device off and +on once per frame. In many profiles I've looked at, that added up to +about 1% of CPU time, but this could get worse in the case of frequent +rendering and readback (as may happen in X rendering). By keeping the +device on until we've been idle for a couple of frames, we drop the +overhead of runtime PM down to sub-.1%. + +Signed-off-by: Eric Anholt +(cherry picked from commit 3a62234680d86efa0239665ed8a0e908f1aef147) +--- + drivers/gpu/drm/vc4/vc4_drv.c | 9 ++++++--- + drivers/gpu/drm/vc4/vc4_gem.c | 6 ++++-- + drivers/gpu/drm/vc4/vc4_v3d.c | 2 ++ + 3 files changed, 12 insertions(+), 5 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -61,21 +61,24 @@ static int vc4_get_param_ioctl(struct dr + if (ret < 0) + return ret; + args->value = V3D_READ(V3D_IDENT0); +- pm_runtime_put(&vc4->v3d->pdev->dev); ++ pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev); ++ pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev); + break; + case DRM_VC4_PARAM_V3D_IDENT1: + ret = pm_runtime_get_sync(&vc4->v3d->pdev->dev); + if (ret < 0) + return ret; + args->value = V3D_READ(V3D_IDENT1); +- pm_runtime_put(&vc4->v3d->pdev->dev); ++ pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev); ++ pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev); + break; + case DRM_VC4_PARAM_V3D_IDENT2: + ret = pm_runtime_get_sync(&vc4->v3d->pdev->dev); + if (ret < 0) + return ret; + args->value = V3D_READ(V3D_IDENT2); +- pm_runtime_put(&vc4->v3d->pdev->dev); ++ pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev); ++ pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev); + break; + case DRM_VC4_PARAM_SUPPORTS_BRANCHES: + case DRM_VC4_PARAM_SUPPORTS_ETC1: +--- a/drivers/gpu/drm/vc4/vc4_gem.c ++++ b/drivers/gpu/drm/vc4/vc4_gem.c +@@ -711,8 +711,10 @@ vc4_complete_exec(struct drm_device *dev + } + + mutex_lock(&vc4->power_lock); +- if (--vc4->power_refcount == 0) +- pm_runtime_put(&vc4->v3d->pdev->dev); ++ if (--vc4->power_refcount == 0) { ++ pm_runtime_mark_last_busy(&vc4->v3d->pdev->dev); ++ pm_runtime_put_autosuspend(&vc4->v3d->pdev->dev); ++ } + mutex_unlock(&vc4->power_lock); + + kfree(exec); +--- a/drivers/gpu/drm/vc4/vc4_v3d.c ++++ b/drivers/gpu/drm/vc4/vc4_v3d.c +@@ -222,6 +222,8 @@ static int vc4_v3d_bind(struct device *d + return ret; + } + ++ pm_runtime_use_autosuspend(dev); ++ pm_runtime_set_autosuspend_delay(dev, 40); /* a little over 2 frames. */ + pm_runtime_enable(dev); + + return 0; diff --git a/target/linux/brcm2708/patches-4.9/950-0165-drm-vc4-Add-fragment-shader-threading-support.patch b/target/linux/brcm2708/patches-4.9/950-0165-drm-vc4-Add-fragment-shader-threading-support.patch new file mode 100644 index 000000000000..ea0f4f117745 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0165-drm-vc4-Add-fragment-shader-threading-support.patch @@ -0,0 +1,228 @@ +From 8f5722ac3e42a33345bfd82b7ad6a153134a4239 Mon Sep 17 00:00:00 2001 +From: Jonas Pfeil +Date: Tue, 8 Nov 2016 00:18:39 +0100 +Subject: [PATCH] drm/vc4: Add fragment shader threading support + +FS threading brings performance improvements of 0-20% in glmark2. + +The validation code checks for thread switch signals and ensures that +the registers of the other thread are not touched, and that our clamps +are not live across thread switches. It also checks that the +threading and branching instructions do not interfere. + +(Original patch by Jonas, changes by anholt for style cleanup, +removing validation the kernel doesn't need to do, and adding the flag +for userspace). + +v2: Minor style fixes from checkpatch. + +Signed-off-by: Jonas Pfeil +Signed-off-by: Eric Anholt +(cherry picked from commit c778cc5df944291dcdb1ca7a6bb781fbc22550c5) +--- + drivers/gpu/drm/vc4/vc4_drv.c | 1 + + drivers/gpu/drm/vc4/vc4_drv.h | 2 + + drivers/gpu/drm/vc4/vc4_validate.c | 17 +++++--- + drivers/gpu/drm/vc4/vc4_validate_shaders.c | 63 ++++++++++++++++++++++++++++++ + include/uapi/drm/vc4_drm.h | 1 + + 5 files changed, 79 insertions(+), 5 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -82,6 +82,7 @@ static int vc4_get_param_ioctl(struct dr + break; + case DRM_VC4_PARAM_SUPPORTS_BRANCHES: + case DRM_VC4_PARAM_SUPPORTS_ETC1: ++ case DRM_VC4_PARAM_SUPPORTS_THREADED_FS: + args->value = true; + break; + default: +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -384,6 +384,8 @@ struct vc4_validated_shader_info { + + uint32_t num_uniform_addr_offsets; + uint32_t *uniform_addr_offsets; ++ ++ bool is_threaded; + }; + + /** +--- a/drivers/gpu/drm/vc4/vc4_validate.c ++++ b/drivers/gpu/drm/vc4/vc4_validate.c +@@ -789,11 +789,6 @@ validate_gl_shader_rec(struct drm_device + exec->shader_rec_v += roundup(packet_size, 16); + exec->shader_rec_size -= packet_size; + +- if (!(*(uint16_t *)pkt_u & VC4_SHADER_FLAG_FS_SINGLE_THREAD)) { +- DRM_ERROR("Multi-threaded fragment shaders not supported.\n"); +- return -EINVAL; +- } +- + for (i = 0; i < shader_reloc_count; i++) { + if (src_handles[i] > exec->bo_count) { + DRM_ERROR("Shader handle %d too big\n", src_handles[i]); +@@ -810,6 +805,18 @@ validate_gl_shader_rec(struct drm_device + return -EINVAL; + } + ++ if (((*(uint16_t *)pkt_u & VC4_SHADER_FLAG_FS_SINGLE_THREAD) == 0) != ++ to_vc4_bo(&bo[0]->base)->validated_shader->is_threaded) { ++ DRM_ERROR("Thread mode of CL and FS do not match\n"); ++ return -EINVAL; ++ } ++ ++ if (to_vc4_bo(&bo[1]->base)->validated_shader->is_threaded || ++ to_vc4_bo(&bo[2]->base)->validated_shader->is_threaded) { ++ DRM_ERROR("cs and vs cannot be threaded\n"); ++ return -EINVAL; ++ } ++ + for (i = 0; i < shader_reloc_count; i++) { + struct vc4_validated_shader_info *validated_shader; + uint32_t o = shader_reloc_offsets[i]; +--- a/drivers/gpu/drm/vc4/vc4_validate_shaders.c ++++ b/drivers/gpu/drm/vc4/vc4_validate_shaders.c +@@ -83,6 +83,13 @@ struct vc4_shader_validation_state { + * basic blocks. + */ + bool needs_uniform_address_for_loop; ++ ++ /* Set when we find an instruction writing the top half of the ++ * register files. If we allowed writing the unusable regs in ++ * a threaded shader, then the other shader running on our ++ * QPU's clamp validation would be invalid. ++ */ ++ bool all_registers_used; + }; + + static uint32_t +@@ -119,6 +126,13 @@ raddr_add_a_to_live_reg_index(uint64_t i + } + + static bool ++live_reg_is_upper_half(uint32_t lri) ++{ ++ return (lri >= 16 && lri < 32) || ++ (lri >= 32 + 16 && lri < 32 + 32); ++} ++ ++static bool + is_tmu_submit(uint32_t waddr) + { + return (waddr == QPU_W_TMU0_S || +@@ -390,6 +404,9 @@ check_reg_write(struct vc4_validated_sha + } else { + validation_state->live_immediates[lri] = ~0; + } ++ ++ if (live_reg_is_upper_half(lri)) ++ validation_state->all_registers_used = true; + } + + switch (waddr) { +@@ -598,6 +615,11 @@ check_instruction_reads(struct vc4_valid + } + } + ++ if ((raddr_a >= 16 && raddr_a < 32) || ++ (raddr_b >= 16 && raddr_b < 32 && sig != QPU_SIG_SMALL_IMM)) { ++ validation_state->all_registers_used = true; ++ } ++ + return true; + } + +@@ -753,6 +775,7 @@ vc4_validate_shader(struct drm_gem_cma_o + { + bool found_shader_end = false; + int shader_end_ip = 0; ++ uint32_t last_thread_switch_ip = -3; + uint32_t ip; + struct vc4_validated_shader_info *validated_shader = NULL; + struct vc4_shader_validation_state validation_state; +@@ -785,6 +808,17 @@ vc4_validate_shader(struct drm_gem_cma_o + if (!vc4_handle_branch_target(&validation_state)) + goto fail; + ++ if (ip == last_thread_switch_ip + 3) { ++ /* Reset r0-r3 live clamp data */ ++ int i; ++ ++ for (i = 64; i < LIVE_REG_COUNT; i++) { ++ validation_state.live_min_clamp_offsets[i] = ~0; ++ validation_state.live_max_clamp_regs[i] = false; ++ validation_state.live_immediates[i] = ~0; ++ } ++ } ++ + switch (sig) { + case QPU_SIG_NONE: + case QPU_SIG_WAIT_FOR_SCOREBOARD: +@@ -794,6 +828,8 @@ vc4_validate_shader(struct drm_gem_cma_o + case QPU_SIG_LOAD_TMU1: + case QPU_SIG_PROG_END: + case QPU_SIG_SMALL_IMM: ++ case QPU_SIG_THREAD_SWITCH: ++ case QPU_SIG_LAST_THREAD_SWITCH: + if (!check_instruction_writes(validated_shader, + &validation_state)) { + DRM_ERROR("Bad write at ip %d\n", ip); +@@ -809,6 +845,18 @@ vc4_validate_shader(struct drm_gem_cma_o + shader_end_ip = ip; + } + ++ if (sig == QPU_SIG_THREAD_SWITCH || ++ sig == QPU_SIG_LAST_THREAD_SWITCH) { ++ validated_shader->is_threaded = true; ++ ++ if (ip < last_thread_switch_ip + 3) { ++ DRM_ERROR("Thread switch too soon after " ++ "last switch at ip %d\n", ip); ++ goto fail; ++ } ++ last_thread_switch_ip = ip; ++ } ++ + break; + + case QPU_SIG_LOAD_IMM: +@@ -823,6 +871,13 @@ vc4_validate_shader(struct drm_gem_cma_o + if (!check_branch(inst, validated_shader, + &validation_state, ip)) + goto fail; ++ ++ if (ip < last_thread_switch_ip + 3) { ++ DRM_ERROR("Branch in thread switch at ip %d", ++ ip); ++ goto fail; ++ } ++ + break; + default: + DRM_ERROR("Unsupported QPU signal %d at " +@@ -844,6 +899,14 @@ vc4_validate_shader(struct drm_gem_cma_o + goto fail; + } + ++ /* Might corrupt other thread */ ++ if (validated_shader->is_threaded && ++ validation_state.all_registers_used) { ++ DRM_ERROR("Shader uses threading, but uses the upper " ++ "half of the registers, too\n"); ++ goto fail; ++ } ++ + /* If we did a backwards branch and we haven't emitted a uniforms + * reset since then, we still need the uniforms stream to have the + * uniforms address available so that the backwards branch can do its +--- a/include/uapi/drm/vc4_drm.h ++++ b/include/uapi/drm/vc4_drm.h +@@ -287,6 +287,7 @@ struct drm_vc4_get_hang_state { + #define DRM_VC4_PARAM_V3D_IDENT2 2 + #define DRM_VC4_PARAM_SUPPORTS_BRANCHES 3 + #define DRM_VC4_PARAM_SUPPORTS_ETC1 4 ++#define DRM_VC4_PARAM_SUPPORTS_THREADED_FS 5 + + struct drm_vc4_get_param { + __u32 param; diff --git a/target/linux/brcm2708/patches-4.9/950-0166-drm-vc4-Fix-race-between-page-flip-completion-event-.patch b/target/linux/brcm2708/patches-4.9/950-0166-drm-vc4-Fix-race-between-page-flip-completion-event-.patch new file mode 100644 index 000000000000..3c66fefafda1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0166-drm-vc4-Fix-race-between-page-flip-completion-event-.patch @@ -0,0 +1,93 @@ +From d7f32f81cf7579ac7d13127db88e789ea864824c Mon Sep 17 00:00:00 2001 +From: Derek Foreman +Date: Thu, 24 Nov 2016 12:11:55 -0600 +Subject: [PATCH] drm/vc4: Fix race between page flip completion event and + clean-up + +There was a small window where a userspace program could submit +a pageflip after receiving a pageflip completion event yet still +receive EBUSY. + +Signed-off-by: Derek Foreman +Signed-off-by: Eric Anholt +Reviewed-by: Eric Anholt +Reviewed-by: Daniel Stone +(cherry picked from commit 26fc78f6fef39b9d7a15def5e7e9826ff68303f4) +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 8 ++++++++ + drivers/gpu/drm/vc4/vc4_drv.h | 1 + + drivers/gpu/drm/vc4/vc4_kms.c | 33 +++++++++++++++++++++++++-------- + 3 files changed, 34 insertions(+), 8 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -682,6 +682,14 @@ void vc4_disable_vblank(struct drm_devic + CRTC_WRITE(PV_INTEN, 0); + } + ++/* Must be called with the event lock held */ ++bool vc4_event_pending(struct drm_crtc *crtc) ++{ ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ ++ return !!vc4_crtc->event; ++} ++ + static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) + { + struct drm_crtc *crtc = &vc4_crtc->base; +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -445,6 +445,7 @@ int vc4_bo_stats_debugfs(struct seq_file + extern struct platform_driver vc4_crtc_driver; + int vc4_enable_vblank(struct drm_device *dev, unsigned int crtc_id); + void vc4_disable_vblank(struct drm_device *dev, unsigned int crtc_id); ++bool vc4_event_pending(struct drm_crtc *crtc); + int vc4_crtc_debugfs_regs(struct seq_file *m, void *arg); + int vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id, + unsigned int flags, int *vpos, int *hpos, +--- a/drivers/gpu/drm/vc4/vc4_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_kms.c +@@ -119,17 +119,34 @@ static int vc4_atomic_commit(struct drm_ + + /* Make sure that any outstanding modesets have finished. */ + if (nonblock) { +- ret = down_trylock(&vc4->async_modeset); +- if (ret) { ++ struct drm_crtc *crtc; ++ struct drm_crtc_state *crtc_state; ++ unsigned long flags; ++ bool busy = false; ++ ++ /* ++ * If there's an undispatched event to send then we're ++ * obviously still busy. If there isn't, then we can ++ * unconditionally wait for the semaphore because it ++ * shouldn't be contended (for long). ++ * ++ * This is to prevent a race where queuing a new flip ++ * from userspace immediately on receipt of an event ++ * beats our clean-up and returns EBUSY. ++ */ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ for_each_crtc_in_state(state, crtc, crtc_state, i) ++ busy |= vc4_event_pending(crtc); ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++ if (busy) { + kfree(c); + return -EBUSY; + } +- } else { +- ret = down_interruptible(&vc4->async_modeset); +- if (ret) { +- kfree(c); +- return ret; +- } ++ } ++ ret = down_interruptible(&vc4->async_modeset); ++ if (ret) { ++ kfree(c); ++ return ret; + } + + ret = drm_atomic_helper_prepare_planes(dev, state); diff --git a/target/linux/brcm2708/patches-4.9/950-0167-drm-vc4-Fix-clock_select-setting-for-the-VEC-encoder.patch b/target/linux/brcm2708/patches-4.9/950-0167-drm-vc4-Fix-clock_select-setting-for-the-VEC-encoder.patch new file mode 100644 index 000000000000..c2499c130ad5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0167-drm-vc4-Fix-clock_select-setting-for-the-VEC-encoder.patch @@ -0,0 +1,113 @@ +From 3b162fdf85d89829d58bbee2d7d79987aceaa595 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Fri, 2 Dec 2016 14:48:07 +0100 +Subject: [PATCH] drm/vc4: Fix ->clock_select setting for the VEC encoder + +PV_CONTROL_CLK_SELECT_VEC is actually 2 and not 0. Fix the definition and +rework the vc4_set_crtc_possible_masks() to cover the full range of the +PV_CONTROL_CLK_SELECT field. + +Signed-off-by: Boris Brezillon +Signed-off-by: Eric Anholt +(cherry picked from commit ab8df60e3a3b68420d0d4477c5f07c00fbfb078b) +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 38 +++++++++++++++++++++++--------------- + drivers/gpu/drm/vc4/vc4_drv.h | 1 + + drivers/gpu/drm/vc4/vc4_regs.h | 3 ++- + 3 files changed, 26 insertions(+), 16 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -83,8 +83,7 @@ struct vc4_crtc_data { + /* Which channel of the HVS this pixelvalve sources from. */ + int hvs_channel; + +- enum vc4_encoder_type encoder0_type; +- enum vc4_encoder_type encoder1_type; ++ enum vc4_encoder_type encoder_types[4]; + }; + + #define CRTC_WRITE(offset, val) writel(val, vc4_crtc->regs + (offset)) +@@ -880,20 +879,26 @@ static const struct drm_crtc_helper_func + + static const struct vc4_crtc_data pv0_data = { + .hvs_channel = 0, +- .encoder0_type = VC4_ENCODER_TYPE_DSI0, +- .encoder1_type = VC4_ENCODER_TYPE_DPI, ++ .encoder_types = { ++ [PV_CONTROL_CLK_SELECT_DSI] = VC4_ENCODER_TYPE_DSI0, ++ [PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI] = VC4_ENCODER_TYPE_DPI, ++ }, + }; + + static const struct vc4_crtc_data pv1_data = { + .hvs_channel = 2, +- .encoder0_type = VC4_ENCODER_TYPE_DSI1, +- .encoder1_type = VC4_ENCODER_TYPE_SMI, ++ .encoder_types = { ++ [PV_CONTROL_CLK_SELECT_DSI] = VC4_ENCODER_TYPE_DSI1, ++ [PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI] = VC4_ENCODER_TYPE_SMI, ++ }, + }; + + static const struct vc4_crtc_data pv2_data = { + .hvs_channel = 1, +- .encoder0_type = VC4_ENCODER_TYPE_VEC, +- .encoder1_type = VC4_ENCODER_TYPE_HDMI, ++ .encoder_types = { ++ [PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI] = VC4_ENCODER_TYPE_HDMI, ++ [PV_CONTROL_CLK_SELECT_VEC] = VC4_ENCODER_TYPE_VEC, ++ }, + }; + + static const struct of_device_id vc4_crtc_dt_match[] = { +@@ -907,17 +912,20 @@ static void vc4_set_crtc_possible_masks( + struct drm_crtc *crtc) + { + struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ const struct vc4_crtc_data *crtc_data = vc4_crtc->data; ++ const enum vc4_encoder_type *encoder_types = crtc_data->encoder_types; + struct drm_encoder *encoder; + + drm_for_each_encoder(encoder, drm) { + struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder); ++ int i; + +- if (vc4_encoder->type == vc4_crtc->data->encoder0_type) { +- vc4_encoder->clock_select = 0; +- encoder->possible_crtcs |= drm_crtc_mask(crtc); +- } else if (vc4_encoder->type == vc4_crtc->data->encoder1_type) { +- vc4_encoder->clock_select = 1; +- encoder->possible_crtcs |= drm_crtc_mask(crtc); ++ for (i = 0; i < ARRAY_SIZE(crtc_data->encoder_types); i++) { ++ if (vc4_encoder->type == encoder_types[i]) { ++ vc4_encoder->clock_select = i; ++ encoder->possible_crtcs |= drm_crtc_mask(crtc); ++ break; ++ } + } + } + } +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -197,6 +197,7 @@ to_vc4_plane(struct drm_plane *plane) + } + + enum vc4_encoder_type { ++ VC4_ENCODER_TYPE_NONE, + VC4_ENCODER_TYPE_HDMI, + VC4_ENCODER_TYPE_VEC, + VC4_ENCODER_TYPE_DSI0, +--- a/drivers/gpu/drm/vc4/vc4_regs.h ++++ b/drivers/gpu/drm/vc4/vc4_regs.h +@@ -177,8 +177,9 @@ + # define PV_CONTROL_WAIT_HSTART BIT(12) + # define PV_CONTROL_PIXEL_REP_MASK VC4_MASK(5, 4) + # define PV_CONTROL_PIXEL_REP_SHIFT 4 +-# define PV_CONTROL_CLK_SELECT_DSI_VEC 0 ++# define PV_CONTROL_CLK_SELECT_DSI 0 + # define PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI 1 ++# define PV_CONTROL_CLK_SELECT_VEC 2 + # define PV_CONTROL_CLK_SELECT_MASK VC4_MASK(3, 2) + # define PV_CONTROL_CLK_SELECT_SHIFT 2 + # define PV_CONTROL_FIFO_CLR BIT(1) diff --git a/target/linux/brcm2708/patches-4.9/950-0168-drm-Add-TV-connector-states-to-drm_connector_state.patch b/target/linux/brcm2708/patches-4.9/950-0168-drm-Add-TV-connector-states-to-drm_connector_state.patch new file mode 100644 index 000000000000..39e6f1166564 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0168-drm-Add-TV-connector-states-to-drm_connector_state.patch @@ -0,0 +1,148 @@ +From 01ff94b770786a793c08fc7fcbecdd5f859a8958 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Fri, 2 Dec 2016 14:48:09 +0100 +Subject: [PATCH] drm: Add TV connector states to drm_connector_state + +Some generic TV connector properties are exposed in drm_mode_config, but +they are currently handled independently in each DRM encoder driver. + +Extend the drm_connector_state to store TV related states, and modify the +drm_atomic_connector_{set,get}_property() helpers to fill the connector +state accordingly. + +Each driver is then responsible for checking and applying the new config +in its ->atomic_mode_{check,set}() operations. + +Signed-off-by: Boris Brezillon +Reviewed-by: Daniel Vetter +Signed-off-by: Eric Anholt +(cherry picked from commit 299a16b163c95fbe1e3b1e142ba9c6ce9dab2c23) +--- + drivers/gpu/drm/drm_atomic.c | 50 ++++++++++++++++++++++++++++++++++++++++++++ + include/drm/drm_connector.h | 32 ++++++++++++++++++++++++++++ + 2 files changed, 82 insertions(+) + +--- a/drivers/gpu/drm/drm_atomic.c ++++ b/drivers/gpu/drm/drm_atomic.c +@@ -989,12 +989,38 @@ int drm_atomic_connector_set_property(st + * now?) atomic writes to DPMS property: + */ + return -EINVAL; ++ } else if (property == config->tv_select_subconnector_property) { ++ state->tv.subconnector = val; ++ } else if (property == config->tv_left_margin_property) { ++ state->tv.margins.left = val; ++ } else if (property == config->tv_right_margin_property) { ++ state->tv.margins.right = val; ++ } else if (property == config->tv_top_margin_property) { ++ state->tv.margins.top = val; ++ } else if (property == config->tv_bottom_margin_property) { ++ state->tv.margins.bottom = val; ++ } else if (property == config->tv_mode_property) { ++ state->tv.mode = val; ++ } else if (property == config->tv_brightness_property) { ++ state->tv.brightness = val; ++ } else if (property == config->tv_contrast_property) { ++ state->tv.contrast = val; ++ } else if (property == config->tv_flicker_reduction_property) { ++ state->tv.flicker_reduction = val; ++ } else if (property == config->tv_overscan_property) { ++ state->tv.overscan = val; ++ } else if (property == config->tv_saturation_property) { ++ state->tv.saturation = val; ++ } else if (property == config->tv_hue_property) { ++ state->tv.hue = val; + } else if (connector->funcs->atomic_set_property) { + return connector->funcs->atomic_set_property(connector, + state, property, val); + } else { + return -EINVAL; + } ++ ++ return 0; + } + EXPORT_SYMBOL(drm_atomic_connector_set_property); + +@@ -1025,6 +1051,30 @@ drm_atomic_connector_get_property(struct + *val = (state->crtc) ? state->crtc->base.id : 0; + } else if (property == config->dpms_property) { + *val = connector->dpms; ++ } else if (property == config->tv_select_subconnector_property) { ++ *val = state->tv.subconnector; ++ } else if (property == config->tv_left_margin_property) { ++ *val = state->tv.margins.left; ++ } else if (property == config->tv_right_margin_property) { ++ *val = state->tv.margins.right; ++ } else if (property == config->tv_top_margin_property) { ++ *val = state->tv.margins.top; ++ } else if (property == config->tv_bottom_margin_property) { ++ *val = state->tv.margins.bottom; ++ } else if (property == config->tv_mode_property) { ++ *val = state->tv.mode; ++ } else if (property == config->tv_brightness_property) { ++ *val = state->tv.brightness; ++ } else if (property == config->tv_contrast_property) { ++ *val = state->tv.contrast; ++ } else if (property == config->tv_flicker_reduction_property) { ++ *val = state->tv.flicker_reduction; ++ } else if (property == config->tv_overscan_property) { ++ *val = state->tv.overscan; ++ } else if (property == config->tv_saturation_property) { ++ *val = state->tv.saturation; ++ } else if (property == config->tv_hue_property) { ++ *val = state->tv.hue; + } else if (connector->funcs->atomic_get_property) { + return connector->funcs->atomic_get_property(connector, + state, property, val); +--- a/include/drm/drm_connector.h ++++ b/include/drm/drm_connector.h +@@ -194,10 +194,40 @@ int drm_display_info_set_bus_formats(str + unsigned int num_formats); + + /** ++ * struct drm_tv_connector_state - TV connector related states ++ * @subconnector: selected subconnector ++ * @margins: left/right/top/bottom margins ++ * @mode: TV mode ++ * @brightness: brightness in percent ++ * @contrast: contrast in percent ++ * @flicker_reduction: flicker reduction in percent ++ * @overscan: overscan in percent ++ * @saturation: saturation in percent ++ * @hue: hue in percent ++ */ ++struct drm_tv_connector_state { ++ enum drm_mode_subconnector subconnector; ++ struct { ++ unsigned int left; ++ unsigned int right; ++ unsigned int top; ++ unsigned int bottom; ++ } margins; ++ unsigned int mode; ++ unsigned int brightness; ++ unsigned int contrast; ++ unsigned int flicker_reduction; ++ unsigned int overscan; ++ unsigned int saturation; ++ unsigned int hue; ++}; ++ ++/** + * struct drm_connector_state - mutable connector state + * @connector: backpointer to the connector + * @best_encoder: can be used by helpers and drivers to select the encoder + * @state: backpointer to global drm_atomic_state ++ * @tv: TV connector state + */ + struct drm_connector_state { + struct drm_connector *connector; +@@ -213,6 +243,8 @@ struct drm_connector_state { + struct drm_encoder *best_encoder; + + struct drm_atomic_state *state; ++ ++ struct drm_tv_connector_state tv; + }; + + /** diff --git a/target/linux/brcm2708/patches-4.9/950-0169-drm-Turn-DRM_MODE_SUBCONNECTOR_xx-definitions-into-a.patch b/target/linux/brcm2708/patches-4.9/950-0169-drm-Turn-DRM_MODE_SUBCONNECTOR_xx-definitions-into-a.patch new file mode 100644 index 000000000000..db82c0c5ac6b --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0169-drm-Turn-DRM_MODE_SUBCONNECTOR_xx-definitions-into-a.patch @@ -0,0 +1,46 @@ +From 1c18e33ab3ff21703925a427e5f55075427a598c Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Fri, 2 Dec 2016 14:48:08 +0100 +Subject: [PATCH] drm: Turn DRM_MODE_SUBCONNECTOR_xx definitions into an enum + +List of values like the DRM_MODE_SUBCONNECTOR_xx ones are better +represented with enums. + +Turn the DRM_MODE_SUBCONNECTOR_xx macros into an enum. + +Signed-off-by: Boris Brezillon +Suggested-by: Daniel Vetter +Reviewed-by: Daniel Vetter +Signed-off-by: Eric Anholt +(cherry picked from commit dee7a4fee730ca8908f335b6b66174cba4598ecd) +--- + include/uapi/drm/drm_mode.h | 18 ++++++++++-------- + 1 file changed, 10 insertions(+), 8 deletions(-) + +--- a/include/uapi/drm/drm_mode.h ++++ b/include/uapi/drm/drm_mode.h +@@ -220,14 +220,16 @@ struct drm_mode_get_encoder { + + /* This is for connectors with multiple signal types. */ + /* Try to match DRM_MODE_CONNECTOR_X as closely as possible. */ +-#define DRM_MODE_SUBCONNECTOR_Automatic 0 +-#define DRM_MODE_SUBCONNECTOR_Unknown 0 +-#define DRM_MODE_SUBCONNECTOR_DVID 3 +-#define DRM_MODE_SUBCONNECTOR_DVIA 4 +-#define DRM_MODE_SUBCONNECTOR_Composite 5 +-#define DRM_MODE_SUBCONNECTOR_SVIDEO 6 +-#define DRM_MODE_SUBCONNECTOR_Component 8 +-#define DRM_MODE_SUBCONNECTOR_SCART 9 ++enum drm_mode_subconnector { ++ DRM_MODE_SUBCONNECTOR_Automatic = 0, ++ DRM_MODE_SUBCONNECTOR_Unknown = 0, ++ DRM_MODE_SUBCONNECTOR_DVID = 3, ++ DRM_MODE_SUBCONNECTOR_DVIA = 4, ++ DRM_MODE_SUBCONNECTOR_Composite = 5, ++ DRM_MODE_SUBCONNECTOR_SVIDEO = 6, ++ DRM_MODE_SUBCONNECTOR_Component = 8, ++ DRM_MODE_SUBCONNECTOR_SCART = 9, ++}; + + #define DRM_MODE_CONNECTOR_Unknown 0 + #define DRM_MODE_CONNECTOR_VGA 1 diff --git a/target/linux/brcm2708/patches-4.9/950-0170-drm-vc4-Add-support-for-the-VEC-Video-Encoder-IP.patch b/target/linux/brcm2708/patches-4.9/950-0170-drm-vc4-Add-support-for-the-VEC-Video-Encoder-IP.patch new file mode 100644 index 000000000000..0b5a85385629 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0170-drm-vc4-Add-support-for-the-VEC-Video-Encoder-IP.patch @@ -0,0 +1,730 @@ +From d79cd118969fb3ad714feb834eefdddcc4348673 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Fri, 2 Dec 2016 14:48:10 +0100 +Subject: [PATCH] drm/vc4: Add support for the VEC (Video Encoder) IP + +The VEC IP is a TV DAC, providing support for PAL and NTSC standards. + +Signed-off-by: Boris Brezillon +Signed-off-by: Eric Anholt +(cherry picked from commit e4b81f8c74c82dbc0cb0e5ceb5ef9b713b325fc9) +--- + drivers/gpu/drm/vc4/Makefile | 1 + + drivers/gpu/drm/vc4/vc4_debugfs.c | 1 + + drivers/gpu/drm/vc4/vc4_drv.c | 1 + + drivers/gpu/drm/vc4/vc4_drv.h | 5 + + drivers/gpu/drm/vc4/vc4_vec.c | 657 ++++++++++++++++++++++++++++++++++++++ + 5 files changed, 665 insertions(+) + create mode 100644 drivers/gpu/drm/vc4/vc4_vec.c + +--- a/drivers/gpu/drm/vc4/Makefile ++++ b/drivers/gpu/drm/vc4/Makefile +@@ -12,6 +12,7 @@ vc4-y := \ + vc4_kms.o \ + vc4_gem.o \ + vc4_hdmi.o \ ++ vc4_vec.o \ + vc4_hvs.o \ + vc4_irq.o \ + vc4_plane.o \ +--- a/drivers/gpu/drm/vc4/vc4_debugfs.c ++++ b/drivers/gpu/drm/vc4/vc4_debugfs.c +@@ -19,6 +19,7 @@ static const struct drm_info_list vc4_de + {"bo_stats", vc4_bo_stats_debugfs, 0}, + {"dpi_regs", vc4_dpi_debugfs_regs, 0}, + {"hdmi_regs", vc4_hdmi_debugfs_regs, 0}, ++ {"vec_regs", vc4_vec_debugfs_regs, 0}, + {"hvs_regs", vc4_hvs_debugfs_regs, 0}, + {"crtc0_regs", vc4_crtc_debugfs_regs, 0, (void *)(uintptr_t)0}, + {"crtc1_regs", vc4_crtc_debugfs_regs, 0, (void *)(uintptr_t)1}, +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -294,6 +294,7 @@ static const struct component_master_ops + + static struct platform_driver *const component_drivers[] = { + &vc4_hdmi_driver, ++ &vc4_vec_driver, + &vc4_dpi_driver, + &vc4_hvs_driver, + &vc4_crtc_driver, +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -20,6 +20,7 @@ struct vc4_dev { + struct vc4_crtc *crtc[3]; + struct vc4_v3d *v3d; + struct vc4_dpi *dpi; ++ struct vc4_vec *vec; + + struct drm_fbdev_cma *fbdev; + +@@ -494,6 +495,10 @@ int vc4_queue_seqno_cb(struct drm_device + extern struct platform_driver vc4_hdmi_driver; + int vc4_hdmi_debugfs_regs(struct seq_file *m, void *unused); + ++/* vc4_hdmi.c */ ++extern struct platform_driver vc4_vec_driver; ++int vc4_vec_debugfs_regs(struct seq_file *m, void *unused); ++ + /* vc4_irq.c */ + irqreturn_t vc4_irq(int irq, void *arg); + void vc4_irq_preinstall(struct drm_device *dev); +--- /dev/null ++++ b/drivers/gpu/drm/vc4/vc4_vec.c +@@ -0,0 +1,657 @@ ++/* ++ * Copyright (C) 2016 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++/** ++ * DOC: VC4 SDTV module ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "vc4_drv.h" ++#include "vc4_regs.h" ++ ++/* WSE Registers */ ++#define VEC_WSE_RESET 0xc0 ++ ++#define VEC_WSE_CONTROL 0xc4 ++#define VEC_WSE_WSS_ENABLE BIT(7) ++ ++#define VEC_WSE_WSS_DATA 0xc8 ++#define VEC_WSE_VPS_DATA1 0xcc ++#define VEC_WSE_VPS_CONTROL 0xd0 ++ ++/* VEC Registers */ ++#define VEC_REVID 0x100 ++ ++#define VEC_CONFIG0 0x104 ++#define VEC_CONFIG0_YDEL_MASK GENMASK(28, 26) ++#define VEC_CONFIG0_YDEL(x) ((x) << 26) ++#define VEC_CONFIG0_CDEL_MASK GENMASK(25, 24) ++#define VEC_CONFIG0_CDEL(x) ((x) << 24) ++#define VEC_CONFIG0_PBPR_FIL BIT(18) ++#define VEC_CONFIG0_CHROMA_GAIN_MASK GENMASK(17, 16) ++#define VEC_CONFIG0_CHROMA_GAIN_UNITY (0 << 16) ++#define VEC_CONFIG0_CHROMA_GAIN_1_32 (1 << 16) ++#define VEC_CONFIG0_CHROMA_GAIN_1_16 (2 << 16) ++#define VEC_CONFIG0_CHROMA_GAIN_1_8 (3 << 16) ++#define VEC_CONFIG0_CBURST_GAIN_MASK GENMASK(14, 13) ++#define VEC_CONFIG0_CBURST_GAIN_UNITY (0 << 13) ++#define VEC_CONFIG0_CBURST_GAIN_1_128 (1 << 13) ++#define VEC_CONFIG0_CBURST_GAIN_1_64 (2 << 13) ++#define VEC_CONFIG0_CBURST_GAIN_1_32 (3 << 13) ++#define VEC_CONFIG0_CHRBW1 BIT(11) ++#define VEC_CONFIG0_CHRBW0 BIT(10) ++#define VEC_CONFIG0_SYNCDIS BIT(9) ++#define VEC_CONFIG0_BURDIS BIT(8) ++#define VEC_CONFIG0_CHRDIS BIT(7) ++#define VEC_CONFIG0_PDEN BIT(6) ++#define VEC_CONFIG0_YCDELAY BIT(4) ++#define VEC_CONFIG0_RAMPEN BIT(2) ++#define VEC_CONFIG0_YCDIS BIT(2) ++#define VEC_CONFIG0_STD_MASK GENMASK(1, 0) ++#define VEC_CONFIG0_NTSC_STD 0 ++#define VEC_CONFIG0_PAL_BDGHI_STD 1 ++#define VEC_CONFIG0_PAL_N_STD 3 ++ ++#define VEC_SCHPH 0x108 ++#define VEC_SOFT_RESET 0x10c ++#define VEC_CLMP0_START 0x144 ++#define VEC_CLMP0_END 0x148 ++#define VEC_FREQ3_2 0x180 ++#define VEC_FREQ1_0 0x184 ++ ++#define VEC_CONFIG1 0x188 ++#define VEC_CONFIG_VEC_RESYNC_OFF BIT(18) ++#define VEC_CONFIG_RGB219 BIT(17) ++#define VEC_CONFIG_CBAR_EN BIT(16) ++#define VEC_CONFIG_TC_OBB BIT(15) ++#define VEC_CONFIG1_OUTPUT_MODE_MASK GENMASK(12, 10) ++#define VEC_CONFIG1_C_Y_CVBS (0 << 10) ++#define VEC_CONFIG1_CVBS_Y_C (1 << 10) ++#define VEC_CONFIG1_PR_Y_PB (2 << 10) ++#define VEC_CONFIG1_RGB (4 << 10) ++#define VEC_CONFIG1_Y_C_CVBS (5 << 10) ++#define VEC_CONFIG1_C_CVBS_Y (6 << 10) ++#define VEC_CONFIG1_C_CVBS_CVBS (7 << 10) ++#define VEC_CONFIG1_DIS_CHR BIT(9) ++#define VEC_CONFIG1_DIS_LUMA BIT(8) ++#define VEC_CONFIG1_YCBCR_IN BIT(6) ++#define VEC_CONFIG1_DITHER_TYPE_LFSR 0 ++#define VEC_CONFIG1_DITHER_TYPE_COUNTER BIT(5) ++#define VEC_CONFIG1_DITHER_EN BIT(4) ++#define VEC_CONFIG1_CYDELAY BIT(3) ++#define VEC_CONFIG1_LUMADIS BIT(2) ++#define VEC_CONFIG1_COMPDIS BIT(1) ++#define VEC_CONFIG1_CUSTOM_FREQ BIT(0) ++ ++#define VEC_CONFIG2 0x18c ++#define VEC_CONFIG2_PROG_SCAN BIT(15) ++#define VEC_CONFIG2_SYNC_ADJ_MASK GENMASK(14, 12) ++#define VEC_CONFIG2_SYNC_ADJ(x) (((x) / 2) << 12) ++#define VEC_CONFIG2_PBPR_EN BIT(10) ++#define VEC_CONFIG2_UV_DIG_DIS BIT(6) ++#define VEC_CONFIG2_RGB_DIG_DIS BIT(5) ++#define VEC_CONFIG2_TMUX_MASK GENMASK(3, 2) ++#define VEC_CONFIG2_TMUX_DRIVE0 (0 << 2) ++#define VEC_CONFIG2_TMUX_RG_COMP (1 << 2) ++#define VEC_CONFIG2_TMUX_UV_YC (2 << 2) ++#define VEC_CONFIG2_TMUX_SYNC_YC (3 << 2) ++ ++#define VEC_INTERRUPT_CONTROL 0x190 ++#define VEC_INTERRUPT_STATUS 0x194 ++#define VEC_FCW_SECAM_B 0x198 ++#define VEC_SECAM_GAIN_VAL 0x19c ++ ++#define VEC_CONFIG3 0x1a0 ++#define VEC_CONFIG3_HORIZ_LEN_STD (0 << 0) ++#define VEC_CONFIG3_HORIZ_LEN_MPEG1_SIF (1 << 0) ++#define VEC_CONFIG3_SHAPE_NON_LINEAR BIT(1) ++ ++#define VEC_STATUS0 0x200 ++#define VEC_MASK0 0x204 ++ ++#define VEC_CFG 0x208 ++#define VEC_CFG_SG_MODE_MASK GENMASK(6, 5) ++#define VEC_CFG_SG_MODE(x) ((x) << 5) ++#define VEC_CFG_SG_EN BIT(4) ++#define VEC_CFG_VEC_EN BIT(3) ++#define VEC_CFG_MB_EN BIT(2) ++#define VEC_CFG_ENABLE BIT(1) ++#define VEC_CFG_TB_EN BIT(0) ++ ++#define VEC_DAC_TEST 0x20c ++ ++#define VEC_DAC_CONFIG 0x210 ++#define VEC_DAC_CONFIG_LDO_BIAS_CTRL(x) ((x) << 24) ++#define VEC_DAC_CONFIG_DRIVER_CTRL(x) ((x) << 16) ++#define VEC_DAC_CONFIG_DAC_CTRL(x) (x) ++ ++#define VEC_DAC_MISC 0x214 ++#define VEC_DAC_MISC_VCD_CTRL_MASK GENMASK(31, 16) ++#define VEC_DAC_MISC_VCD_CTRL(x) ((x) << 16) ++#define VEC_DAC_MISC_VID_ACT BIT(8) ++#define VEC_DAC_MISC_VCD_PWRDN BIT(6) ++#define VEC_DAC_MISC_BIAS_PWRDN BIT(5) ++#define VEC_DAC_MISC_DAC_PWRDN BIT(2) ++#define VEC_DAC_MISC_LDO_PWRDN BIT(1) ++#define VEC_DAC_MISC_DAC_RST_N BIT(0) ++ ++ ++/* General VEC hardware state. */ ++struct vc4_vec { ++ struct platform_device *pdev; ++ ++ struct drm_encoder *encoder; ++ struct drm_connector *connector; ++ ++ void __iomem *regs; ++ ++ struct clk *clock; ++ ++ const struct vc4_vec_tv_mode *tv_mode; ++}; ++ ++#define VEC_READ(offset) readl(vec->regs + (offset)) ++#define VEC_WRITE(offset, val) writel(val, vec->regs + (offset)) ++ ++/* VC4 VEC encoder KMS struct */ ++struct vc4_vec_encoder { ++ struct vc4_encoder base; ++ struct vc4_vec *vec; ++}; ++ ++static inline struct vc4_vec_encoder * ++to_vc4_vec_encoder(struct drm_encoder *encoder) ++{ ++ return container_of(encoder, struct vc4_vec_encoder, base.base); ++} ++ ++/* VC4 VEC connector KMS struct */ ++struct vc4_vec_connector { ++ struct drm_connector base; ++ struct vc4_vec *vec; ++ ++ /* Since the connector is attached to just the one encoder, ++ * this is the reference to it so we can do the best_encoder() ++ * hook. ++ */ ++ struct drm_encoder *encoder; ++}; ++ ++static inline struct vc4_vec_connector * ++to_vc4_vec_connector(struct drm_connector *connector) ++{ ++ return container_of(connector, struct vc4_vec_connector, base); ++} ++ ++enum vc4_vec_tv_mode_id { ++ VC4_VEC_TV_MODE_NTSC, ++ VC4_VEC_TV_MODE_NTSC_J, ++ VC4_VEC_TV_MODE_PAL, ++ VC4_VEC_TV_MODE_PAL_M, ++}; ++ ++struct vc4_vec_tv_mode { ++ const struct drm_display_mode *mode; ++ void (*mode_set)(struct vc4_vec *vec); ++}; ++ ++#define VEC_REG(reg) { reg, #reg } ++static const struct { ++ u32 reg; ++ const char *name; ++} vec_regs[] = { ++ VEC_REG(VEC_WSE_CONTROL), ++ VEC_REG(VEC_WSE_WSS_DATA), ++ VEC_REG(VEC_WSE_VPS_DATA1), ++ VEC_REG(VEC_WSE_VPS_CONTROL), ++ VEC_REG(VEC_REVID), ++ VEC_REG(VEC_CONFIG0), ++ VEC_REG(VEC_SCHPH), ++ VEC_REG(VEC_CLMP0_START), ++ VEC_REG(VEC_CLMP0_END), ++ VEC_REG(VEC_FREQ3_2), ++ VEC_REG(VEC_FREQ1_0), ++ VEC_REG(VEC_CONFIG1), ++ VEC_REG(VEC_CONFIG2), ++ VEC_REG(VEC_INTERRUPT_CONTROL), ++ VEC_REG(VEC_INTERRUPT_STATUS), ++ VEC_REG(VEC_FCW_SECAM_B), ++ VEC_REG(VEC_SECAM_GAIN_VAL), ++ VEC_REG(VEC_CONFIG3), ++ VEC_REG(VEC_STATUS0), ++ VEC_REG(VEC_MASK0), ++ VEC_REG(VEC_CFG), ++ VEC_REG(VEC_DAC_TEST), ++ VEC_REG(VEC_DAC_CONFIG), ++ VEC_REG(VEC_DAC_MISC), ++}; ++ ++#ifdef CONFIG_DEBUG_FS ++int vc4_vec_debugfs_regs(struct seq_file *m, void *unused) ++{ ++ struct drm_info_node *node = (struct drm_info_node *)m->private; ++ struct drm_device *dev = node->minor->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); ++ struct vc4_vec *vec = vc4->vec; ++ int i; ++ ++ if (!vec) ++ return 0; ++ ++ for (i = 0; i < ARRAY_SIZE(vec_regs); i++) { ++ seq_printf(m, "%s (0x%04x): 0x%08x\n", ++ vec_regs[i].name, vec_regs[i].reg, ++ VEC_READ(vec_regs[i].reg)); ++ } ++ ++ return 0; ++} ++#endif ++ ++static void vc4_vec_ntsc_mode_set(struct vc4_vec *vec) ++{ ++ VEC_WRITE(VEC_CONFIG0, VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN); ++ VEC_WRITE(VEC_CONFIG1, VEC_CONFIG1_C_CVBS_CVBS); ++} ++ ++static void vc4_vec_ntsc_j_mode_set(struct vc4_vec *vec) ++{ ++ VEC_WRITE(VEC_CONFIG0, VEC_CONFIG0_NTSC_STD); ++ VEC_WRITE(VEC_CONFIG1, VEC_CONFIG1_C_CVBS_CVBS); ++} ++ ++static const struct drm_display_mode ntsc_mode = { ++ DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 13500, ++ 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0, ++ 480, 480 + 3, 480 + 3 + 3, 480 + 3 + 3 + 16, 0, ++ DRM_MODE_FLAG_INTERLACE) ++}; ++ ++static void vc4_vec_pal_mode_set(struct vc4_vec *vec) ++{ ++ VEC_WRITE(VEC_CONFIG0, VEC_CONFIG0_PAL_BDGHI_STD); ++ VEC_WRITE(VEC_CONFIG1, VEC_CONFIG1_C_CVBS_CVBS); ++} ++ ++static void vc4_vec_pal_m_mode_set(struct vc4_vec *vec) ++{ ++ VEC_WRITE(VEC_CONFIG0, VEC_CONFIG0_PAL_BDGHI_STD); ++ VEC_WRITE(VEC_CONFIG1, ++ VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ); ++ VEC_WRITE(VEC_FREQ3_2, 0x223b); ++ VEC_WRITE(VEC_FREQ1_0, 0x61d1); ++} ++ ++static const struct drm_display_mode pal_mode = { ++ DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 13500, ++ 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0, ++ 576, 576 + 2, 576 + 2 + 3, 576 + 2 + 3 + 20, 0, ++ DRM_MODE_FLAG_INTERLACE) ++}; ++ ++static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = { ++ [VC4_VEC_TV_MODE_NTSC] = { ++ .mode = &ntsc_mode, ++ .mode_set = vc4_vec_ntsc_mode_set, ++ }, ++ [VC4_VEC_TV_MODE_NTSC_J] = { ++ .mode = &ntsc_mode, ++ .mode_set = vc4_vec_ntsc_j_mode_set, ++ }, ++ [VC4_VEC_TV_MODE_PAL] = { ++ .mode = &pal_mode, ++ .mode_set = vc4_vec_pal_mode_set, ++ }, ++ [VC4_VEC_TV_MODE_PAL_M] = { ++ .mode = &pal_mode, ++ .mode_set = vc4_vec_pal_m_mode_set, ++ }, ++}; ++ ++static enum drm_connector_status ++vc4_vec_connector_detect(struct drm_connector *connector, bool force) ++{ ++ return connector_status_unknown; ++} ++ ++static void vc4_vec_connector_destroy(struct drm_connector *connector) ++{ ++ drm_connector_unregister(connector); ++ drm_connector_cleanup(connector); ++} ++ ++static int vc4_vec_connector_get_modes(struct drm_connector *connector) ++{ ++ struct drm_connector_state *state = connector->state; ++ struct drm_display_mode *mode; ++ ++ mode = drm_mode_duplicate(connector->dev, ++ vc4_vec_tv_modes[state->tv.mode].mode); ++ if (!mode) { ++ DRM_ERROR("Failed to create a new display mode\n"); ++ return -ENOMEM; ++ } ++ ++ drm_mode_probed_add(connector, mode); ++ ++ return 1; ++} ++ ++static const struct drm_connector_funcs vc4_vec_connector_funcs = { ++ .dpms = drm_atomic_helper_connector_dpms, ++ .detect = vc4_vec_connector_detect, ++ .fill_modes = drm_helper_probe_single_connector_modes, ++ .set_property = drm_atomic_helper_connector_set_property, ++ .destroy = vc4_vec_connector_destroy, ++ .reset = drm_atomic_helper_connector_reset, ++ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, ++}; ++ ++static const struct drm_connector_helper_funcs vc4_vec_connector_helper_funcs = { ++ .get_modes = vc4_vec_connector_get_modes, ++}; ++ ++static struct drm_connector *vc4_vec_connector_init(struct drm_device *dev, ++ struct vc4_vec *vec) ++{ ++ struct drm_connector *connector = NULL; ++ struct vc4_vec_connector *vec_connector; ++ ++ vec_connector = devm_kzalloc(dev->dev, sizeof(*vec_connector), ++ GFP_KERNEL); ++ if (!vec_connector) ++ return ERR_PTR(-ENOMEM); ++ ++ connector = &vec_connector->base; ++ connector->interlace_allowed = true; ++ ++ vec_connector->encoder = vec->encoder; ++ vec_connector->vec = vec; ++ ++ drm_connector_init(dev, connector, &vc4_vec_connector_funcs, ++ DRM_MODE_CONNECTOR_Composite); ++ drm_connector_helper_add(connector, &vc4_vec_connector_helper_funcs); ++ ++ drm_object_attach_property(&connector->base, ++ dev->mode_config.tv_mode_property, ++ VC4_VEC_TV_MODE_NTSC); ++ vec->tv_mode = &vc4_vec_tv_modes[VC4_VEC_TV_MODE_NTSC]; ++ ++ drm_mode_connector_attach_encoder(connector, vec->encoder); ++ ++ return connector; ++} ++ ++static const struct drm_encoder_funcs vc4_vec_encoder_funcs = { ++ .destroy = drm_encoder_cleanup, ++}; ++ ++static void vc4_vec_encoder_disable(struct drm_encoder *encoder) ++{ ++ struct vc4_vec_encoder *vc4_vec_encoder = to_vc4_vec_encoder(encoder); ++ struct vc4_vec *vec = vc4_vec_encoder->vec; ++ int ret; ++ ++ VEC_WRITE(VEC_CFG, 0); ++ VEC_WRITE(VEC_DAC_MISC, ++ VEC_DAC_MISC_VCD_PWRDN | ++ VEC_DAC_MISC_BIAS_PWRDN | ++ VEC_DAC_MISC_DAC_PWRDN | ++ VEC_DAC_MISC_LDO_PWRDN); ++ ++ clk_disable_unprepare(vec->clock); ++ ++ ret = pm_runtime_put(&vec->pdev->dev); ++ if (ret < 0) { ++ DRM_ERROR("Failed to release power domain: %d\n", ret); ++ return; ++ } ++} ++ ++static void vc4_vec_encoder_enable(struct drm_encoder *encoder) ++{ ++ struct vc4_vec_encoder *vc4_vec_encoder = to_vc4_vec_encoder(encoder); ++ struct vc4_vec *vec = vc4_vec_encoder->vec; ++ int ret; ++ ++ ret = pm_runtime_get_sync(&vec->pdev->dev); ++ if (ret < 0) { ++ DRM_ERROR("Failed to retain power domain: %d\n", ret); ++ return; ++ } ++ ++ /* ++ * We need to set the clock rate each time we enable the encoder ++ * because there's a chance we share the same parent with the HDMI ++ * clock, and both drivers are requesting different rates. ++ * The good news is, these 2 encoders cannot be enabled at the same ++ * time, thus preventing incompatible rate requests. ++ */ ++ ret = clk_set_rate(vec->clock, 108000000); ++ if (ret) { ++ DRM_ERROR("Failed to set clock rate: %d\n", ret); ++ return; ++ } ++ ++ ret = clk_prepare_enable(vec->clock); ++ if (ret) { ++ DRM_ERROR("Failed to turn on core clock: %d\n", ret); ++ return; ++ } ++ ++ /* Reset the different blocks */ ++ VEC_WRITE(VEC_WSE_RESET, 1); ++ VEC_WRITE(VEC_SOFT_RESET, 1); ++ ++ /* Disable the CGSM-A and WSE blocks */ ++ VEC_WRITE(VEC_WSE_CONTROL, 0); ++ ++ /* Write config common to all modes. */ ++ ++ /* ++ * Color subcarrier phase: phase = 360 * SCHPH / 256. ++ * 0x28 <=> 39.375 deg. ++ */ ++ VEC_WRITE(VEC_SCHPH, 0x28); ++ ++ /* ++ * Reset to default values. ++ */ ++ VEC_WRITE(VEC_CLMP0_START, 0xac); ++ VEC_WRITE(VEC_CLMP0_END, 0xec); ++ VEC_WRITE(VEC_CONFIG2, ++ VEC_CONFIG2_UV_DIG_DIS | VEC_CONFIG2_RGB_DIG_DIS); ++ VEC_WRITE(VEC_CONFIG3, VEC_CONFIG3_HORIZ_LEN_STD); ++ VEC_WRITE(VEC_DAC_CONFIG, ++ VEC_DAC_CONFIG_DAC_CTRL(0xc) | ++ VEC_DAC_CONFIG_DRIVER_CTRL(0xc) | ++ VEC_DAC_CONFIG_LDO_BIAS_CTRL(0x46)); ++ ++ /* Mask all interrupts. */ ++ VEC_WRITE(VEC_MASK0, 0); ++ ++ vec->tv_mode->mode_set(vec); ++ ++ VEC_WRITE(VEC_DAC_MISC, ++ VEC_DAC_MISC_VID_ACT | VEC_DAC_MISC_DAC_RST_N); ++ VEC_WRITE(VEC_CFG, VEC_CFG_VEC_EN); ++} ++ ++ ++static bool vc4_vec_encoder_mode_fixup(struct drm_encoder *encoder, ++ const struct drm_display_mode *mode, ++ struct drm_display_mode *adjusted_mode) ++{ ++ return true; ++} ++ ++static void vc4_vec_encoder_atomic_mode_set(struct drm_encoder *encoder, ++ struct drm_crtc_state *crtc_state, ++ struct drm_connector_state *conn_state) ++{ ++ struct vc4_vec_encoder *vc4_vec_encoder = to_vc4_vec_encoder(encoder); ++ struct vc4_vec *vec = vc4_vec_encoder->vec; ++ ++ vec->tv_mode = &vc4_vec_tv_modes[conn_state->tv.mode]; ++} ++ ++static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder, ++ struct drm_crtc_state *crtc_state, ++ struct drm_connector_state *conn_state) ++{ ++ const struct vc4_vec_tv_mode *vec_mode; ++ ++ vec_mode = &vc4_vec_tv_modes[conn_state->tv.mode]; ++ ++ if (conn_state->crtc && ++ !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode)) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static const struct drm_encoder_helper_funcs vc4_vec_encoder_helper_funcs = { ++ .disable = vc4_vec_encoder_disable, ++ .enable = vc4_vec_encoder_enable, ++ .mode_fixup = vc4_vec_encoder_mode_fixup, ++ .atomic_check = vc4_vec_encoder_atomic_check, ++ .atomic_mode_set = vc4_vec_encoder_atomic_mode_set, ++}; ++ ++static const struct of_device_id vc4_vec_dt_match[] = { ++ { .compatible = "brcm,bcm2835-vec", .data = NULL }, ++ { /* sentinel */ }, ++}; ++ ++static const char * const tv_mode_names[] = { ++ [VC4_VEC_TV_MODE_NTSC] = "NTSC", ++ [VC4_VEC_TV_MODE_NTSC_J] = "NTSC-J", ++ [VC4_VEC_TV_MODE_PAL] = "PAL", ++ [VC4_VEC_TV_MODE_PAL_M] = "PAL-M", ++}; ++ ++static int vc4_vec_bind(struct device *dev, struct device *master, void *data) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct drm_device *drm = dev_get_drvdata(master); ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ struct vc4_vec *vec; ++ struct vc4_vec_encoder *vc4_vec_encoder; ++ int ret; ++ ++ ret = drm_mode_create_tv_properties(drm, ARRAY_SIZE(tv_mode_names), ++ tv_mode_names); ++ if (ret) ++ return ret; ++ ++ vec = devm_kzalloc(dev, sizeof(*vec), GFP_KERNEL); ++ if (!vec) ++ return -ENOMEM; ++ ++ vc4_vec_encoder = devm_kzalloc(dev, sizeof(*vc4_vec_encoder), ++ GFP_KERNEL); ++ if (!vc4_vec_encoder) ++ return -ENOMEM; ++ vc4_vec_encoder->base.type = VC4_ENCODER_TYPE_VEC; ++ vc4_vec_encoder->vec = vec; ++ vec->encoder = &vc4_vec_encoder->base.base; ++ ++ vec->pdev = pdev; ++ vec->regs = vc4_ioremap_regs(pdev, 0); ++ if (IS_ERR(vec->regs)) ++ return PTR_ERR(vec->regs); ++ ++ vec->clock = devm_clk_get(dev, NULL); ++ if (IS_ERR(vec->clock)) { ++ ret = PTR_ERR(vec->clock); ++ if (ret != -EPROBE_DEFER) ++ DRM_ERROR("Failed to get clock: %d\n", ret); ++ return ret; ++ } ++ ++ pm_runtime_enable(dev); ++ ++ drm_encoder_init(drm, vec->encoder, &vc4_vec_encoder_funcs, ++ DRM_MODE_ENCODER_TVDAC, NULL); ++ drm_encoder_helper_add(vec->encoder, &vc4_vec_encoder_helper_funcs); ++ ++ vec->connector = vc4_vec_connector_init(drm, vec); ++ if (IS_ERR(vec->connector)) { ++ ret = PTR_ERR(vec->connector); ++ goto err_destroy_encoder; ++ } ++ ++ dev_set_drvdata(dev, vec); ++ ++ vc4->vec = vec; ++ ++ return 0; ++ ++err_destroy_encoder: ++ drm_encoder_cleanup(vec->encoder); ++ pm_runtime_disable(dev); ++ ++ return ret; ++} ++ ++static void vc4_vec_unbind(struct device *dev, struct device *master, ++ void *data) ++{ ++ struct drm_device *drm = dev_get_drvdata(master); ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ struct vc4_vec *vec = dev_get_drvdata(dev); ++ ++ vc4_vec_connector_destroy(vec->connector); ++ drm_encoder_cleanup(vec->encoder); ++ pm_runtime_disable(dev); ++ ++ vc4->vec = NULL; ++} ++ ++static const struct component_ops vc4_vec_ops = { ++ .bind = vc4_vec_bind, ++ .unbind = vc4_vec_unbind, ++}; ++ ++static int vc4_vec_dev_probe(struct platform_device *pdev) ++{ ++ return component_add(&pdev->dev, &vc4_vec_ops); ++} ++ ++static int vc4_vec_dev_remove(struct platform_device *pdev) ++{ ++ component_del(&pdev->dev, &vc4_vec_ops); ++ return 0; ++} ++ ++struct platform_driver vc4_vec_driver = { ++ .probe = vc4_vec_dev_probe, ++ .remove = vc4_vec_dev_remove, ++ .driver = { ++ .name = "vc4_vec", ++ .of_match_table = vc4_vec_dt_match, ++ }, ++}; diff --git a/target/linux/brcm2708/patches-4.9/950-0171-drm-vc4-Set-up-SCALER_DISPCTRL-at-boot.patch b/target/linux/brcm2708/patches-4.9/950-0171-drm-vc4-Set-up-SCALER_DISPCTRL-at-boot.patch new file mode 100644 index 000000000000..1a425cac008e --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0171-drm-vc4-Set-up-SCALER_DISPCTRL-at-boot.patch @@ -0,0 +1,58 @@ +From e79b86a0c5ccd0e8c16e31b2d494d43e997253d1 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 15 Sep 2016 15:25:23 +0100 +Subject: [PATCH] drm/vc4: Set up SCALER_DISPCTRL at boot. + +We want the HVS on, obviously, and we also want DSP3 (PV1's source) to +be muxed from HVS channel 2 like we expect in vc4_crtc.c. The +firmware wasn't setting the DSP3 mux up when both the LCD and HDMI +were disabled. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_hvs.c | 14 ++++++++++++++ + drivers/gpu/drm/vc4/vc4_regs.h | 3 +++ + 2 files changed, 17 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -170,6 +170,7 @@ static int vc4_hvs_bind(struct device *d + struct vc4_dev *vc4 = drm->dev_private; + struct vc4_hvs *hvs = NULL; + int ret; ++ u32 dispctrl; + + hvs = devm_kzalloc(&pdev->dev, sizeof(*hvs), GFP_KERNEL); + if (!hvs) +@@ -211,6 +212,19 @@ static int vc4_hvs_bind(struct device *d + return ret; + + vc4->hvs = hvs; ++ ++ dispctrl = HVS_READ(SCALER_DISPCTRL); ++ ++ dispctrl |= SCALER_DISPCTRL_ENABLE; ++ ++ /* Set DSP3 (PV1) to use HVS channel 2, which would otherwise ++ * be unused. ++ */ ++ dispctrl &= ~SCALER_DISPCTRL_DSP3_MUX_MASK; ++ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_DSP3_MUX); ++ ++ HVS_WRITE(SCALER_DISPCTRL, dispctrl); ++ + return 0; + } + +--- a/drivers/gpu/drm/vc4/vc4_regs.h ++++ b/drivers/gpu/drm/vc4/vc4_regs.h +@@ -244,6 +244,9 @@ + # define SCALER_DISPCTRL_ENABLE BIT(31) + # define SCALER_DISPCTRL_DSP2EISLUR BIT(15) + # define SCALER_DISPCTRL_DSP1EISLUR BIT(14) ++# define SCALER_DISPCTRL_DSP3_MUX_MASK VC4_MASK(19, 18) ++# define SCALER_DISPCTRL_DSP3_MUX_SHIFT 18 ++ + /* Enables Display 0 short line and underrun contribution to + * SCALER_DISPSTAT_IRQDISP0. Note that short frame contributions are + * always enabled. diff --git a/target/linux/brcm2708/patches-4.9/950-0172-drm-vc4-Add-support-for-feeding-DSI-encoders-from-th.patch b/target/linux/brcm2708/patches-4.9/950-0172-drm-vc4-Add-support-for-feeding-DSI-encoders-from-th.patch new file mode 100644 index 000000000000..15243a32b7f1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0172-drm-vc4-Add-support-for-feeding-DSI-encoders-from-th.patch @@ -0,0 +1,113 @@ +From 01ffdd37dcd3c9e526ac9135bfd289beb45f84a0 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 10 Feb 2016 16:17:29 -0800 +Subject: [PATCH] drm/vc4: Add support for feeding DSI encoders from the pixel + valve. + +We have to set a different pixel format, which tells the hardware to +use the pix_width field that's fed in sideband from the DSI encoder to +divide the "pixel" clock. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 33 +++++++++++++++++++-------------- + drivers/gpu/drm/vc4/vc4_regs.h | 2 ++ + 2 files changed, 21 insertions(+), 14 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -352,38 +352,40 @@ static u32 vc4_get_fifo_full_level(u32 f + } + + /* +- * Returns the clock select bit for the connector attached to the +- * CRTC. ++ * Returns the encoder attached to the CRTC. ++ * ++ * VC4 can only scan out to one encoder at a time, while the DRM core ++ * allows drivers to push pixels to more than one encoder from the ++ * same CRTC. + */ +-static int vc4_get_clock_select(struct drm_crtc *crtc) ++static struct drm_encoder *vc4_get_crtc_encoder(struct drm_crtc *crtc) + { + struct drm_connector *connector; + + drm_for_each_connector(connector, crtc->dev) { + if (connector->state->crtc == crtc) { +- struct drm_encoder *encoder = connector->encoder; +- struct vc4_encoder *vc4_encoder = +- to_vc4_encoder(encoder); +- +- return vc4_encoder->clock_select; ++ return connector->encoder; + } + } + +- return -1; ++ return NULL; + } + + static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc) + { + struct drm_device *dev = crtc->dev; + struct vc4_dev *vc4 = to_vc4_dev(dev); ++ struct drm_encoder *encoder = vc4_get_crtc_encoder(crtc); ++ struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder); + struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); + struct drm_crtc_state *state = crtc->state; + struct drm_display_mode *mode = &state->adjusted_mode; + bool interlace = mode->flags & DRM_MODE_FLAG_INTERLACE; + u32 pixel_rep = (mode->flags & DRM_MODE_FLAG_DBLCLK) ? 2 : 1; +- u32 format = PV_CONTROL_FORMAT_24; ++ bool is_dsi = (vc4_encoder->type == VC4_ENCODER_TYPE_DSI0 || ++ vc4_encoder->type == VC4_ENCODER_TYPE_DSI1); ++ u32 format = is_dsi ? PV_CONTROL_FORMAT_DSIV_24 : PV_CONTROL_FORMAT_24; + bool debug_dump_regs = false; +- int clock_select = vc4_get_clock_select(crtc); + + if (debug_dump_regs) { + DRM_INFO("CRTC %d regs before:\n", drm_crtc_index(crtc)); +@@ -439,17 +441,19 @@ static void vc4_crtc_mode_set_nofb(struc + */ + CRTC_WRITE(PV_V_CONTROL, + PV_VCONTROL_CONTINUOUS | ++ (is_dsi ? PV_VCONTROL_DSI : 0) | + PV_VCONTROL_INTERLACE | + VC4_SET_FIELD(mode->htotal * pixel_rep / 2, + PV_VCONTROL_ODD_DELAY)); + CRTC_WRITE(PV_VSYNCD_EVEN, 0); + } else { +- CRTC_WRITE(PV_V_CONTROL, PV_VCONTROL_CONTINUOUS); ++ CRTC_WRITE(PV_V_CONTROL, ++ PV_VCONTROL_CONTINUOUS | ++ (is_dsi ? PV_VCONTROL_DSI : 0)); + } + + CRTC_WRITE(PV_HACT_ACT, mode->hdisplay * pixel_rep); + +- + CRTC_WRITE(PV_CONTROL, + VC4_SET_FIELD(format, PV_CONTROL_FORMAT) | + VC4_SET_FIELD(vc4_get_fifo_full_level(format), +@@ -458,7 +462,8 @@ static void vc4_crtc_mode_set_nofb(struc + PV_CONTROL_CLR_AT_START | + PV_CONTROL_TRIGGER_UNDERFLOW | + PV_CONTROL_WAIT_HSTART | +- VC4_SET_FIELD(clock_select, PV_CONTROL_CLK_SELECT) | ++ VC4_SET_FIELD(vc4_encoder->clock_select, ++ PV_CONTROL_CLK_SELECT) | + PV_CONTROL_FIFO_CLR | + PV_CONTROL_EN); + +--- a/drivers/gpu/drm/vc4/vc4_regs.h ++++ b/drivers/gpu/drm/vc4/vc4_regs.h +@@ -190,6 +190,8 @@ + # define PV_VCONTROL_ODD_DELAY_SHIFT 6 + # define PV_VCONTROL_ODD_FIRST BIT(5) + # define PV_VCONTROL_INTERLACE BIT(4) ++# define PV_VCONTROL_DSI BIT(3) ++# define PV_VCONTROL_COMMAND BIT(2) + # define PV_VCONTROL_CONTINUOUS BIT(1) + # define PV_VCONTROL_VIDEN BIT(0) + diff --git a/target/linux/brcm2708/patches-4.9/950-0173-drm-vc4-Add-DSI-driver.patch b/target/linux/brcm2708/patches-4.9/950-0173-drm-vc4-Add-DSI-driver.patch new file mode 100644 index 000000000000..97ae4a470a48 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0173-drm-vc4-Add-DSI-driver.patch @@ -0,0 +1,1817 @@ +From 38ea3f3665eaa9deedc3588196fe9ba9bb4032ec Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 10 Feb 2016 11:42:32 -0800 +Subject: [PATCH] drm/vc4: Add DSI driver + +The DSI0 and DSI1 blocks on the 2835 are related hardware blocks. +Some registers move around, and the featureset is slightly different, +as DSI1 (the 4-lane DSI) is a later version of the hardware block. +This driver doesn't yet enable DSI0, since we don't have any hardware +to test against, but it does put a lot of the register definitions and +code in place. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/Kconfig | 2 + + drivers/gpu/drm/vc4/Makefile | 1 + + drivers/gpu/drm/vc4/vc4_debugfs.c | 1 + + drivers/gpu/drm/vc4/vc4_drv.c | 1 + + drivers/gpu/drm/vc4/vc4_drv.h | 5 + + drivers/gpu/drm/vc4/vc4_dsi.c | 1725 +++++++++++++++++++++++++++++++++++++ + 6 files changed, 1735 insertions(+) + create mode 100644 drivers/gpu/drm/vc4/vc4_dsi.c + +--- a/drivers/gpu/drm/vc4/Kconfig ++++ b/drivers/gpu/drm/vc4/Kconfig +@@ -2,10 +2,12 @@ config DRM_VC4 + tristate "Broadcom VC4 Graphics" + depends on ARCH_BCM2835 || COMPILE_TEST + depends on DRM ++ depends on COMMON_CLK + select DRM_KMS_HELPER + select DRM_KMS_CMA_HELPER + select DRM_GEM_CMA_HELPER + select DRM_PANEL ++ select DRM_MIPI_DSI + help + Choose this option if you have a system that has a Broadcom + VC4 GPU, such as the Raspberry Pi or other BCM2708/BCM2835. +--- a/drivers/gpu/drm/vc4/Makefile ++++ b/drivers/gpu/drm/vc4/Makefile +@@ -8,6 +8,7 @@ vc4-y := \ + vc4_crtc.o \ + vc4_drv.o \ + vc4_dpi.o \ ++ vc4_dsi.o \ + vc4_firmware_kms.o \ + vc4_kms.o \ + vc4_gem.o \ +--- a/drivers/gpu/drm/vc4/vc4_debugfs.c ++++ b/drivers/gpu/drm/vc4/vc4_debugfs.c +@@ -18,6 +18,7 @@ + static const struct drm_info_list vc4_debugfs_list[] = { + {"bo_stats", vc4_bo_stats_debugfs, 0}, + {"dpi_regs", vc4_dpi_debugfs_regs, 0}, ++ {"dsi1_regs", vc4_dsi_debugfs_regs, 0, (void *)(uintptr_t)1}, + {"hdmi_regs", vc4_hdmi_debugfs_regs, 0}, + {"vec_regs", vc4_vec_debugfs_regs, 0}, + {"hvs_regs", vc4_hvs_debugfs_regs, 0}, +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -296,6 +296,7 @@ static struct platform_driver *const com + &vc4_hdmi_driver, + &vc4_vec_driver, + &vc4_dpi_driver, ++ &vc4_dsi_driver, + &vc4_hvs_driver, + &vc4_crtc_driver, + &vc4_firmware_kms_driver, +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -20,6 +20,7 @@ struct vc4_dev { + struct vc4_crtc *crtc[3]; + struct vc4_v3d *v3d; + struct vc4_dpi *dpi; ++ struct vc4_dsi *dsi1; + struct vc4_vec *vec; + + struct drm_fbdev_cma *fbdev; +@@ -468,6 +469,10 @@ void __iomem *vc4_ioremap_regs(struct pl + extern struct platform_driver vc4_dpi_driver; + int vc4_dpi_debugfs_regs(struct seq_file *m, void *unused); + ++/* vc4_dsi.c */ ++extern struct platform_driver vc4_dsi_driver; ++int vc4_dsi_debugfs_regs(struct seq_file *m, void *unused); ++ + /* vc4_firmware_kms.c */ + extern struct platform_driver vc4_firmware_kms_driver; + void vc4_fkms_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file); +--- /dev/null ++++ b/drivers/gpu/drm/vc4/vc4_dsi.c +@@ -0,0 +1,1725 @@ ++/* ++ * Copyright (C) 2016 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++/** ++ * DOC: VC4 DSI0/DSI1 module ++ * ++ * BCM2835 contains two DSI modules, DSI0 and DSI1. DSI0 is a ++ * single-lane DSI controller, while DSI1 is a more modern 4-lane DSI ++ * controller. ++ * ++ * Most Raspberry Pi boards expose DSI1 as their "DISPLAY" connector, ++ * while the compute module brings both DSI0 and DSI1 out. ++ * ++ * This driver has been tested for DSI1 video-mode display only ++ * currently, with most of the information necessary for DSI0 ++ * hopefully present. ++ */ ++ ++#include "drm_atomic_helper.h" ++#include "drm_crtc_helper.h" ++#include "drm_edid.h" ++#include "drm_mipi_dsi.h" ++#include "drm_panel.h" ++#include "linux/clk.h" ++#include "linux/clk-provider.h" ++#include "linux/completion.h" ++#include "linux/component.h" ++#include "linux/dmaengine.h" ++#include "linux/i2c.h" ++#include "linux/of_address.h" ++#include "linux/of_platform.h" ++#include "linux/pm_runtime.h" ++#include "vc4_drv.h" ++#include "vc4_regs.h" ++ ++#define DSI_CMD_FIFO_DEPTH 16 ++#define DSI_PIX_FIFO_DEPTH 256 ++#define DSI_PIX_FIFO_WIDTH 4 ++ ++#define DSI0_CTRL 0x00 ++ ++/* Command packet control. */ ++#define DSI0_TXPKT1C 0x04 /* AKA PKTC */ ++#define DSI1_TXPKT1C 0x04 ++# define DSI_TXPKT1C_TRIG_CMD_MASK VC4_MASK(31, 24) ++# define DSI_TXPKT1C_TRIG_CMD_SHIFT 24 ++# define DSI_TXPKT1C_CMD_REPEAT_MASK VC4_MASK(23, 10) ++# define DSI_TXPKT1C_CMD_REPEAT_SHIFT 10 ++ ++# define DSI_TXPKT1C_DISPLAY_NO_MASK VC4_MASK(9, 8) ++# define DSI_TXPKT1C_DISPLAY_NO_SHIFT 8 ++/* Short, trigger, BTA, or a long packet that fits all in CMDFIFO. */ ++# define DSI_TXPKT1C_DISPLAY_NO_SHORT 0 ++/* Primary display where cmdfifo provides part of the payload and ++ * pixelvalve the rest. ++ */ ++# define DSI_TXPKT1C_DISPLAY_NO_PRIMARY 1 ++/* Secondary display where cmdfifo provides part of the payload and ++ * pixfifo the rest. ++ */ ++# define DSI_TXPKT1C_DISPLAY_NO_SECONDARY 2 ++ ++# define DSI_TXPKT1C_CMD_TX_TIME_MASK VC4_MASK(7, 6) ++# define DSI_TXPKT1C_CMD_TX_TIME_SHIFT 6 ++ ++# define DSI_TXPKT1C_CMD_CTRL_MASK VC4_MASK(5, 4) ++# define DSI_TXPKT1C_CMD_CTRL_SHIFT 4 ++/* Command only. Uses TXPKT1H and DISPLAY_NO */ ++# define DSI_TXPKT1C_CMD_CTRL_TX 0 ++/* Command with BTA for either ack or read data. */ ++# define DSI_TXPKT1C_CMD_CTRL_RX 1 ++/* Trigger according to TRIG_CMD */ ++# define DSI_TXPKT1C_CMD_CTRL_TRIG 2 ++/* BTA alone for getting error status after a command, or a TE trigger ++ * without a previous command. ++ */ ++# define DSI_TXPKT1C_CMD_CTRL_BTA 3 ++ ++# define DSI_TXPKT1C_CMD_MODE_LP BIT(3) ++# define DSI_TXPKT1C_CMD_TYPE_LONG BIT(2) ++# define DSI_TXPKT1C_CMD_TE_EN BIT(1) ++# define DSI_TXPKT1C_CMD_EN BIT(0) ++ ++/* Command packet header. */ ++#define DSI0_TXPKT1H 0x08 /* AKA PKTH */ ++#define DSI1_TXPKT1H 0x08 ++# define DSI_TXPKT1H_BC_CMDFIFO_MASK VC4_MASK(31, 24) ++# define DSI_TXPKT1H_BC_CMDFIFO_SHIFT 24 ++# define DSI_TXPKT1H_BC_PARAM_MASK VC4_MASK(23, 8) ++# define DSI_TXPKT1H_BC_PARAM_SHIFT 8 ++# define DSI_TXPKT1H_BC_DT_MASK VC4_MASK(7, 0) ++# define DSI_TXPKT1H_BC_DT_SHIFT 0 ++ ++#define DSI0_RXPKT1H 0x0c /* AKA RX1_PKTH */ ++#define DSI1_RXPKT1H 0x14 ++# define DSI_RXPKT1H_CRC_ERR BIT(31) ++# define DSI_RXPKT1H_DET_ERR BIT(30) ++# define DSI_RXPKT1H_ECC_ERR BIT(29) ++# define DSI_RXPKT1H_COR_ERR BIT(28) ++# define DSI_RXPKT1H_INCOMP_PKT BIT(25) ++# define DSI_RXPKT1H_PKT_TYPE_LONG BIT(24) ++/* Byte count if DSI_RXPKT1H_PKT_TYPE_LONG */ ++# define DSI_RXPKT1H_BC_PARAM_MASK VC4_MASK(23, 8) ++# define DSI_RXPKT1H_BC_PARAM_SHIFT 8 ++/* Short return bytes if !DSI_RXPKT1H_PKT_TYPE_LONG */ ++# define DSI_RXPKT1H_SHORT_1_MASK VC4_MASK(23, 16) ++# define DSI_RXPKT1H_SHORT_1_SHIFT 16 ++# define DSI_RXPKT1H_SHORT_0_MASK VC4_MASK(15, 8) ++# define DSI_RXPKT1H_SHORT_0_SHIFT 8 ++# define DSI_RXPKT1H_DT_LP_CMD_MASK VC4_MASK(7, 0) ++# define DSI_RXPKT1H_DT_LP_CMD_SHIFT 0 ++ ++#define DSI0_RXPKT2H 0x10 /* AKA RX2_PKTH */ ++#define DSI1_RXPKT2H 0x18 ++# define DSI_RXPKT1H_DET_ERR BIT(30) ++# define DSI_RXPKT1H_ECC_ERR BIT(29) ++# define DSI_RXPKT1H_COR_ERR BIT(28) ++# define DSI_RXPKT1H_INCOMP_PKT BIT(25) ++# define DSI_RXPKT1H_BC_PARAM_MASK VC4_MASK(23, 8) ++# define DSI_RXPKT1H_BC_PARAM_SHIFT 8 ++# define DSI_RXPKT1H_DT_MASK VC4_MASK(7, 0) ++# define DSI_RXPKT1H_DT_SHIFT 0 ++ ++#define DSI0_TXPKT_CMD_FIFO 0x14 /* AKA CMD_DATAF */ ++#define DSI1_TXPKT_CMD_FIFO 0x1c ++ ++#define DSI0_DISP0_CTRL 0x18 ++# define DSI_DISP0_PIX_CLK_DIV_MASK VC4_MASK(21, 13) ++# define DSI_DISP0_PIX_CLK_DIV_SHIFT 13 ++# define DSI_DISP0_LP_STOP_CTRL_MASK VC4_MASK(12, 11) ++# define DSI_DISP0_LP_STOP_CTRL_SHIFT 11 ++# define DSI_DISP0_LP_STOP_DISABLE 0 ++# define DSI_DISP0_LP_STOP_PERLINE 1 ++# define DSI_DISP0_LP_STOP_PERFRAME 2 ++ ++/* Transmit RGB pixels and null packets only during HACTIVE, instead ++ * of going to LP-STOP. ++ */ ++# define DSI_DISP_HACTIVE_NULL BIT(10) ++/* Transmit blanking packet only during vblank, instead of allowing LP-STOP. */ ++# define DSI_DISP_VBLP_CTRL BIT(9) ++/* Transmit blanking packet only during HFP, instead of allowing LP-STOP. */ ++# define DSI_DISP_HFP_CTRL BIT(8) ++/* Transmit blanking packet only during HBP, instead of allowing LP-STOP. */ ++# define DSI_DISP_HBP_CTRL BIT(7) ++# define DSI_DISP0_CHANNEL_MASK VC4_MASK(6, 5) ++# define DSI_DISP0_CHANNEL_SHIFT 5 ++/* Enables end events for HSYNC/VSYNC, not just start events. */ ++# define DSI_DISP0_ST_END BIT(4) ++# define DSI_DISP0_PFORMAT_MASK VC4_MASK(3, 2) ++# define DSI_DISP0_PFORMAT_SHIFT 2 ++# define DSI_PFORMAT_RGB565 0 ++# define DSI_PFORMAT_RGB666_PACKED 1 ++# define DSI_PFORMAT_RGB666 2 ++# define DSI_PFORMAT_RGB888 3 ++/* Default is VIDEO mode. */ ++# define DSI_DISP0_COMMAND_MODE BIT(1) ++# define DSI_DISP0_ENABLE BIT(0) ++ ++#define DSI0_DISP1_CTRL 0x1c ++#define DSI1_DISP1_CTRL 0x2c ++/* Format of the data written to TXPKT_PIX_FIFO. */ ++# define DSI_DISP1_PFORMAT_MASK VC4_MASK(2, 1) ++# define DSI_DISP1_PFORMAT_SHIFT 1 ++# define DSI_DISP1_PFORMAT_16BIT 0 ++# define DSI_DISP1_PFORMAT_24BIT 1 ++# define DSI_DISP1_PFORMAT_32BIT_LE 2 ++# define DSI_DISP1_PFORMAT_32BIT_BE 3 ++ ++/* DISP1 is always command mode. */ ++# define DSI_DISP1_ENABLE BIT(0) ++ ++#define DSI0_TXPKT_PIX_FIFO 0x20 /* AKA PIX_FIFO */ ++ ++#define DSI0_INT_STAT 0x24 ++#define DSI0_INT_EN 0x28 ++# define DSI1_INT_PHY_D3_ULPS BIT(30) ++# define DSI1_INT_PHY_D3_STOP BIT(29) ++# define DSI1_INT_PHY_D2_ULPS BIT(28) ++# define DSI1_INT_PHY_D2_STOP BIT(27) ++# define DSI1_INT_PHY_D1_ULPS BIT(26) ++# define DSI1_INT_PHY_D1_STOP BIT(25) ++# define DSI1_INT_PHY_D0_ULPS BIT(24) ++# define DSI1_INT_PHY_D0_STOP BIT(23) ++# define DSI1_INT_FIFO_ERR BIT(22) ++# define DSI1_INT_PHY_DIR_RTF BIT(21) ++# define DSI1_INT_PHY_RXLPDT BIT(20) ++# define DSI1_INT_PHY_RXTRIG BIT(19) ++# define DSI1_INT_PHY_D0_LPDT BIT(18) ++# define DSI1_INT_PHY_DIR_FTR BIT(17) ++ ++/* Signaled when the clock lane enters the given state. */ ++# define DSI1_INT_PHY_CLOCK_ULPS BIT(16) ++# define DSI1_INT_PHY_CLOCK_HS BIT(15) ++# define DSI1_INT_PHY_CLOCK_STOP BIT(14) ++ ++/* Signaled on timeouts */ ++# define DSI1_INT_PR_TO BIT(13) ++# define DSI1_INT_TA_TO BIT(12) ++# define DSI1_INT_LPRX_TO BIT(11) ++# define DSI1_INT_HSTX_TO BIT(10) ++ ++/* Contention on a line when trying to drive the line low */ ++# define DSI1_INT_ERR_CONT_LP1 BIT(9) ++# define DSI1_INT_ERR_CONT_LP0 BIT(8) ++ ++/* Control error: incorrect line state sequence on data lane 0. */ ++# define DSI1_INT_ERR_CONTROL BIT(7) ++/* LPDT synchronization error (bits received not a multiple of 8. */ ++ ++# define DSI1_INT_ERR_SYNC_ESC BIT(6) ++/* Signaled after receiving an error packet from the display in ++ * response to a read. ++ */ ++# define DSI1_INT_RXPKT2 BIT(5) ++/* Signaled after receiving a packet. The header and optional short ++ * response will be in RXPKT1H, and a long response will be in the ++ * RXPKT_FIFO. ++ */ ++# define DSI1_INT_RXPKT1 BIT(4) ++# define DSI1_INT_TXPKT2_DONE BIT(3) ++# define DSI1_INT_TXPKT2_END BIT(2) ++/* Signaled after all repeats of TXPKT1 are transferred. */ ++# define DSI1_INT_TXPKT1_DONE BIT(1) ++/* Signaled after each TXPKT1 repeat is scheduled. */ ++# define DSI1_INT_TXPKT1_END BIT(0) ++ ++#define DSI1_INTERRUPTS_ALWAYS_ENABLED (DSI1_INT_ERR_SYNC_ESC | \ ++ DSI1_INT_ERR_CONTROL | \ ++ DSI1_INT_ERR_CONT_LP0 | \ ++ DSI1_INT_ERR_CONT_LP1 | \ ++ DSI1_INT_HSTX_TO | \ ++ DSI1_INT_LPRX_TO | \ ++ DSI1_INT_TA_TO | \ ++ DSI1_INT_PR_TO) ++ ++#define DSI0_STAT 0x2c ++#define DSI0_HSTX_TO_CNT 0x30 ++#define DSI0_LPRX_TO_CNT 0x34 ++#define DSI0_TA_TO_CNT 0x38 ++#define DSI0_PR_TO_CNT 0x3c ++#define DSI0_PHYC 0x40 ++# define DSI1_PHYC_ESC_CLK_LPDT_MASK VC4_MASK(25, 20) ++# define DSI1_PHYC_ESC_CLK_LPDT_SHIFT 20 ++# define DSI1_PHYC_HS_CLK_CONTINUOUS BIT(18) ++# define DSI0_PHYC_ESC_CLK_LPDT_MASK VC4_MASK(17, 12) ++# define DSI0_PHYC_ESC_CLK_LPDT_SHIFT 12 ++# define DSI1_PHYC_CLANE_ULPS BIT(17) ++# define DSI1_PHYC_CLANE_ENABLE BIT(16) ++# define DSI_PHYC_DLANE3_ULPS BIT(13) ++# define DSI_PHYC_DLANE3_ENABLE BIT(12) ++# define DSI0_PHYC_HS_CLK_CONTINUOUS BIT(10) ++# define DSI0_PHYC_CLANE_ULPS BIT(9) ++# define DSI_PHYC_DLANE2_ULPS BIT(9) ++# define DSI0_PHYC_CLANE_ENABLE BIT(8) ++# define DSI_PHYC_DLANE2_ENABLE BIT(8) ++# define DSI_PHYC_DLANE1_ULPS BIT(5) ++# define DSI_PHYC_DLANE1_ENABLE BIT(4) ++# define DSI_PHYC_DLANE0_FORCE_STOP BIT(2) ++# define DSI_PHYC_DLANE0_ULPS BIT(1) ++# define DSI_PHYC_DLANE0_ENABLE BIT(0) ++ ++#define DSI0_HS_CLT0 0x44 ++#define DSI0_HS_CLT1 0x48 ++#define DSI0_HS_CLT2 0x4c ++#define DSI0_HS_DLT3 0x50 ++#define DSI0_HS_DLT4 0x54 ++#define DSI0_HS_DLT5 0x58 ++#define DSI0_HS_DLT6 0x5c ++#define DSI0_HS_DLT7 0x60 ++ ++#define DSI0_PHY_AFEC0 0x64 ++# define DSI0_PHY_AFEC0_DDR2CLK_EN BIT(26) ++# define DSI0_PHY_AFEC0_DDRCLK_EN BIT(25) ++# define DSI0_PHY_AFEC0_LATCH_ULPS BIT(24) ++# define DSI1_PHY_AFEC0_IDR_DLANE3_MASK VC4_MASK(31, 29) ++# define DSI1_PHY_AFEC0_IDR_DLANE3_SHIFT 29 ++# define DSI1_PHY_AFEC0_IDR_DLANE2_MASK VC4_MASK(28, 26) ++# define DSI1_PHY_AFEC0_IDR_DLANE2_SHIFT 26 ++# define DSI1_PHY_AFEC0_IDR_DLANE1_MASK VC4_MASK(27, 23) ++# define DSI1_PHY_AFEC0_IDR_DLANE1_SHIFT 23 ++# define DSI1_PHY_AFEC0_IDR_DLANE0_MASK VC4_MASK(22, 20) ++# define DSI1_PHY_AFEC0_IDR_DLANE0_SHIFT 20 ++# define DSI1_PHY_AFEC0_IDR_CLANE_MASK VC4_MASK(19, 17) ++# define DSI1_PHY_AFEC0_IDR_CLANE_SHIFT 17 ++# define DSI0_PHY_AFEC0_ACTRL_DLANE1_MASK VC4_MASK(23, 20) ++# define DSI0_PHY_AFEC0_ACTRL_DLANE1_SHIFT 20 ++# define DSI0_PHY_AFEC0_ACTRL_DLANE0_MASK VC4_MASK(19, 16) ++# define DSI0_PHY_AFEC0_ACTRL_DLANE0_SHIFT 16 ++# define DSI0_PHY_AFEC0_ACTRL_CLANE_MASK VC4_MASK(15, 12) ++# define DSI0_PHY_AFEC0_ACTRL_CLANE_SHIFT 12 ++# define DSI1_PHY_AFEC0_DDR2CLK_EN BIT(16) ++# define DSI1_PHY_AFEC0_DDRCLK_EN BIT(15) ++# define DSI1_PHY_AFEC0_LATCH_ULPS BIT(14) ++# define DSI1_PHY_AFEC0_RESET BIT(13) ++# define DSI1_PHY_AFEC0_PD BIT(12) ++# define DSI0_PHY_AFEC0_RESET BIT(11) ++# define DSI1_PHY_AFEC0_PD_BG BIT(11) ++# define DSI0_PHY_AFEC0_PD BIT(10) ++# define DSI1_PHY_AFEC0_PD_DLANE3 BIT(10) ++# define DSI0_PHY_AFEC0_PD_BG BIT(9) ++# define DSI1_PHY_AFEC0_PD_DLANE2 BIT(9) ++# define DSI0_PHY_AFEC0_PD_DLANE1 BIT(8) ++# define DSI1_PHY_AFEC0_PD_DLANE1 BIT(8) ++# define DSI_PHY_AFEC0_PTATADJ_MASK VC4_MASK(7, 4) ++# define DSI_PHY_AFEC0_PTATADJ_SHIFT 4 ++# define DSI_PHY_AFEC0_CTATADJ_MASK VC4_MASK(3, 0) ++# define DSI_PHY_AFEC0_CTATADJ_SHIFT 0 ++ ++#define DSI0_PHY_AFEC1 0x68 ++# define DSI0_PHY_AFEC1_IDR_DLANE1_MASK VC4_MASK(10, 8) ++# define DSI0_PHY_AFEC1_IDR_DLANE1_SHIFT 8 ++# define DSI0_PHY_AFEC1_IDR_DLANE0_MASK VC4_MASK(6, 4) ++# define DSI0_PHY_AFEC1_IDR_DLANE0_SHIFT 4 ++# define DSI0_PHY_AFEC1_IDR_CLANE_MASK VC4_MASK(2, 0) ++# define DSI0_PHY_AFEC1_IDR_CLANE_SHIFT 0 ++ ++#define DSI0_TST_SEL 0x6c ++#define DSI0_TST_MON 0x70 ++#define DSI0_ID 0x74 ++# define DSI_ID_VALUE 0x00647369 ++ ++#define DSI1_CTRL 0x00 ++# define DSI_CTRL_HS_CLKC_MASK VC4_MASK(15, 14) ++# define DSI_CTRL_HS_CLKC_SHIFT 14 ++# define DSI_CTRL_HS_CLKC_BYTE 0 ++# define DSI_CTRL_HS_CLKC_DDR2 1 ++# define DSI_CTRL_HS_CLKC_DDR 2 ++ ++# define DSI_CTRL_RX_LPDT_EOT_DISABLE BIT(13) ++# define DSI_CTRL_LPDT_EOT_DISABLE BIT(12) ++# define DSI_CTRL_HSDT_EOT_DISABLE BIT(11) ++# define DSI_CTRL_SOFT_RESET_CFG BIT(10) ++# define DSI_CTRL_CAL_BYTE BIT(9) ++# define DSI_CTRL_INV_BYTE BIT(8) ++# define DSI_CTRL_CLR_LDF BIT(7) ++# define DSI0_CTRL_CLR_PBCF BIT(6) ++# define DSI1_CTRL_CLR_RXF BIT(6) ++# define DSI0_CTRL_CLR_CPBCF BIT(5) ++# define DSI1_CTRL_CLR_PDF BIT(5) ++# define DSI0_CTRL_CLR_PDF BIT(4) ++# define DSI1_CTRL_CLR_CDF BIT(4) ++# define DSI0_CTRL_CLR_CDF BIT(3) ++# define DSI0_CTRL_CTRL2 BIT(2) ++# define DSI1_CTRL_DISABLE_DISP_CRCC BIT(2) ++# define DSI0_CTRL_CTRL1 BIT(1) ++# define DSI1_CTRL_DISABLE_DISP_ECCC BIT(1) ++# define DSI0_CTRL_CTRL0 BIT(0) ++# define DSI1_CTRL_EN BIT(0) ++# define DSI0_CTRL_RESET_FIFOS (DSI_CTRL_CLR_LDF | \ ++ DSI0_CTRL_CLR_PBCF | \ ++ DSI0_CTRL_CLR_CPBCF | \ ++ DSI0_CTRL_CLR_PDF | \ ++ DSI0_CTRL_CLR_CDF) ++# define DSI1_CTRL_RESET_FIFOS (DSI_CTRL_CLR_LDF | \ ++ DSI1_CTRL_CLR_RXF | \ ++ DSI1_CTRL_CLR_PDF | \ ++ DSI1_CTRL_CLR_CDF) ++ ++#define DSI1_TXPKT2C 0x0c ++#define DSI1_TXPKT2H 0x10 ++#define DSI1_TXPKT_PIX_FIFO 0x20 ++#define DSI1_RXPKT_FIFO 0x24 ++#define DSI1_DISP0_CTRL 0x28 ++#define DSI1_INT_STAT 0x30 ++#define DSI1_INT_EN 0x34 ++/* State reporting bits. These mostly behave like INT_STAT, where ++ * writing a 1 clears the bit. ++ */ ++#define DSI1_STAT 0x38 ++# define DSI1_STAT_PHY_D3_ULPS BIT(31) ++# define DSI1_STAT_PHY_D3_STOP BIT(30) ++# define DSI1_STAT_PHY_D2_ULPS BIT(29) ++# define DSI1_STAT_PHY_D2_STOP BIT(28) ++# define DSI1_STAT_PHY_D1_ULPS BIT(27) ++# define DSI1_STAT_PHY_D1_STOP BIT(26) ++# define DSI1_STAT_PHY_D0_ULPS BIT(25) ++# define DSI1_STAT_PHY_D0_STOP BIT(24) ++# define DSI1_STAT_FIFO_ERR BIT(23) ++# define DSI1_STAT_PHY_RXLPDT BIT(22) ++# define DSI1_STAT_PHY_RXTRIG BIT(21) ++# define DSI1_STAT_PHY_D0_LPDT BIT(20) ++/* Set when in forward direction */ ++# define DSI1_STAT_PHY_DIR BIT(19) ++# define DSI1_STAT_PHY_CLOCK_ULPS BIT(18) ++# define DSI1_STAT_PHY_CLOCK_HS BIT(17) ++# define DSI1_STAT_PHY_CLOCK_STOP BIT(16) ++# define DSI1_STAT_PR_TO BIT(15) ++# define DSI1_STAT_TA_TO BIT(14) ++# define DSI1_STAT_LPRX_TO BIT(13) ++# define DSI1_STAT_HSTX_TO BIT(12) ++# define DSI1_STAT_ERR_CONT_LP1 BIT(11) ++# define DSI1_STAT_ERR_CONT_LP0 BIT(10) ++# define DSI1_STAT_ERR_CONTROL BIT(9) ++# define DSI1_STAT_ERR_SYNC_ESC BIT(8) ++# define DSI1_STAT_RXPKT2 BIT(7) ++# define DSI1_STAT_RXPKT1 BIT(6) ++# define DSI1_STAT_TXPKT2_BUSY BIT(5) ++# define DSI1_STAT_TXPKT2_DONE BIT(4) ++# define DSI1_STAT_TXPKT2_END BIT(3) ++# define DSI1_STAT_TXPKT1_BUSY BIT(2) ++# define DSI1_STAT_TXPKT1_DONE BIT(1) ++# define DSI1_STAT_TXPKT1_END BIT(0) ++ ++#define DSI1_HSTX_TO_CNT 0x3c ++#define DSI1_LPRX_TO_CNT 0x40 ++#define DSI1_TA_TO_CNT 0x44 ++#define DSI1_PR_TO_CNT 0x48 ++#define DSI1_PHYC 0x4c ++ ++#define DSI1_HS_CLT0 0x50 ++# define DSI_HS_CLT0_CZERO_MASK VC4_MASK(26, 18) ++# define DSI_HS_CLT0_CZERO_SHIFT 18 ++# define DSI_HS_CLT0_CPRE_MASK VC4_MASK(17, 9) ++# define DSI_HS_CLT0_CPRE_SHIFT 9 ++# define DSI_HS_CLT0_CPREP_MASK VC4_MASK(8, 0) ++# define DSI_HS_CLT0_CPREP_SHIFT 0 ++ ++#define DSI1_HS_CLT1 0x54 ++# define DSI_HS_CLT1_CTRAIL_MASK VC4_MASK(17, 9) ++# define DSI_HS_CLT1_CTRAIL_SHIFT 9 ++# define DSI_HS_CLT1_CPOST_MASK VC4_MASK(8, 0) ++# define DSI_HS_CLT1_CPOST_SHIFT 0 ++ ++#define DSI1_HS_CLT2 0x58 ++# define DSI_HS_CLT2_WUP_MASK VC4_MASK(23, 0) ++# define DSI_HS_CLT2_WUP_SHIFT 0 ++ ++#define DSI1_HS_DLT3 0x5c ++# define DSI_HS_DLT3_EXIT_MASK VC4_MASK(26, 18) ++# define DSI_HS_DLT3_EXIT_SHIFT 18 ++# define DSI_HS_DLT3_ZERO_MASK VC4_MASK(17, 9) ++# define DSI_HS_DLT3_ZERO_SHIFT 9 ++# define DSI_HS_DLT3_PRE_MASK VC4_MASK(8, 0) ++# define DSI_HS_DLT3_PRE_SHIFT 0 ++ ++#define DSI1_HS_DLT4 0x60 ++# define DSI_HS_DLT4_ANLAT_MASK VC4_MASK(22, 18) ++# define DSI_HS_DLT4_ANLAT_SHIFT 18 ++# define DSI_HS_DLT4_TRAIL_MASK VC4_MASK(17, 9) ++# define DSI_HS_DLT4_TRAIL_SHIFT 9 ++# define DSI_HS_DLT4_LPX_MASK VC4_MASK(8, 0) ++# define DSI_HS_DLT4_LPX_SHIFT 0 ++ ++#define DSI1_HS_DLT5 0x64 ++# define DSI_HS_DLT5_INIT_MASK VC4_MASK(23, 0) ++# define DSI_HS_DLT5_INIT_SHIFT 0 ++ ++#define DSI1_HS_DLT6 0x68 ++# define DSI_HS_DLT6_TA_GET_MASK VC4_MASK(31, 24) ++# define DSI_HS_DLT6_TA_GET_SHIFT 24 ++# define DSI_HS_DLT6_TA_SURE_MASK VC4_MASK(23, 16) ++# define DSI_HS_DLT6_TA_SURE_SHIFT 16 ++# define DSI_HS_DLT6_TA_GO_MASK VC4_MASK(15, 8) ++# define DSI_HS_DLT6_TA_GO_SHIFT 8 ++# define DSI_HS_DLT6_LP_LPX_MASK VC4_MASK(7, 0) ++# define DSI_HS_DLT6_LP_LPX_SHIFT 0 ++ ++#define DSI1_HS_DLT7 0x6c ++# define DSI_HS_DLT7_LP_WUP_MASK VC4_MASK(23, 0) ++# define DSI_HS_DLT7_LP_WUP_SHIFT 0 ++ ++#define DSI1_PHY_AFEC0 0x70 ++ ++#define DSI1_PHY_AFEC1 0x74 ++# define DSI1_PHY_AFEC1_ACTRL_DLANE3_MASK VC4_MASK(19, 16) ++# define DSI1_PHY_AFEC1_ACTRL_DLANE3_SHIFT 16 ++# define DSI1_PHY_AFEC1_ACTRL_DLANE2_MASK VC4_MASK(15, 12) ++# define DSI1_PHY_AFEC1_ACTRL_DLANE2_SHIFT 12 ++# define DSI1_PHY_AFEC1_ACTRL_DLANE1_MASK VC4_MASK(11, 8) ++# define DSI1_PHY_AFEC1_ACTRL_DLANE1_SHIFT 8 ++# define DSI1_PHY_AFEC1_ACTRL_DLANE0_MASK VC4_MASK(7, 4) ++# define DSI1_PHY_AFEC1_ACTRL_DLANE0_SHIFT 4 ++# define DSI1_PHY_AFEC1_ACTRL_CLANE_MASK VC4_MASK(3, 0) ++# define DSI1_PHY_AFEC1_ACTRL_CLANE_SHIFT 0 ++ ++#define DSI1_TST_SEL 0x78 ++#define DSI1_TST_MON 0x7c ++#define DSI1_PHY_TST1 0x80 ++#define DSI1_PHY_TST2 0x84 ++#define DSI1_PHY_FIFO_STAT 0x88 ++/* Actually, all registers in the range that aren't otherwise claimed ++ * will return the ID. ++ */ ++#define DSI1_ID 0x8c ++ ++/* General DSI hardware state. */ ++struct vc4_dsi { ++ struct platform_device *pdev; ++ ++ struct mipi_dsi_host dsi_host; ++ struct drm_encoder *encoder; ++ struct drm_connector *connector; ++ struct drm_panel *panel; ++ ++ void __iomem *regs; ++ ++ struct dma_chan *reg_dma_chan; ++ dma_addr_t reg_dma_paddr; ++ u32 *reg_dma_mem; ++ dma_addr_t reg_paddr; ++ ++ /* Whether we're on bcm2835's DSI0 or DSI1. */ ++ int port; ++ ++ /* DSI channel for the panel we're connected to. */ ++ u32 channel; ++ u32 lanes; ++ enum mipi_dsi_pixel_format format; ++ u32 mode_flags; ++ ++ /* Input clock from CPRMAN to the digital PHY, for the DSI ++ * escape clock. ++ */ ++ struct clk *escape_clock; ++ ++ /* Input clock to the analog PHY, used to generate the DSI bit ++ * clock. ++ */ ++ struct clk *pll_phy_clock; ++ ++ /* HS Clocks generated within the DSI analog PHY. */ ++ struct clk_fixed_factor phy_clocks[3]; ++ ++ struct clk_onecell_data clk_onecell; ++ ++ /* Pixel clock output to the pixelvalve, generated from the HS ++ * clock. ++ */ ++ struct clk *pixel_clock; ++ ++ struct completion xfer_completion; ++ int xfer_result; ++}; ++ ++#define host_to_dsi(host) container_of(host, struct vc4_dsi, dsi_host) ++ ++static inline void ++dsi_dma_workaround_write(struct vc4_dsi *dsi, u32 offset, u32 val) ++{ ++ struct dma_chan *chan = dsi->reg_dma_chan; ++ struct dma_async_tx_descriptor *tx; ++ dma_cookie_t cookie; ++ int ret; ++ ++ /* DSI0 should be able to write normally. */ ++ if (!chan) { ++ writel(val, dsi->regs + offset); ++ return; ++ } ++ ++ *dsi->reg_dma_mem = val; ++ ++ tx = chan->device->device_prep_dma_memcpy(chan, ++ dsi->reg_paddr + offset, ++ dsi->reg_dma_paddr, ++ 4, 0); ++ if (!tx) { ++ DRM_ERROR("Failed to set up DMA register write\n"); ++ return; ++ } ++ ++ cookie = tx->tx_submit(tx); ++ ret = dma_submit_error(cookie); ++ if (ret) { ++ DRM_ERROR("Failed to submit DMA: %d\n", ret); ++ return; ++ } ++ ret = dma_sync_wait(chan, cookie); ++ if (ret) ++ DRM_ERROR("Failed to wait for DMA: %d\n", ret); ++} ++ ++#define DSI_READ(offset) readl(dsi->regs + (offset)) ++#define DSI_WRITE(offset, val) dsi_dma_workaround_write(dsi, offset, val) ++#define DSI_PORT_READ(offset) \ ++ DSI_READ(dsi->port ? DSI1_##offset : DSI0_##offset) ++#define DSI_PORT_WRITE(offset, val) \ ++ DSI_WRITE(dsi->port ? DSI1_##offset : DSI0_##offset, val) ++#define DSI_PORT_BIT(bit) (dsi->port ? DSI1_##bit : DSI0_##bit) ++ ++/* VC4 DSI encoder KMS struct */ ++struct vc4_dsi_encoder { ++ struct vc4_encoder base; ++ struct vc4_dsi *dsi; ++}; ++ ++static inline struct vc4_dsi_encoder * ++to_vc4_dsi_encoder(struct drm_encoder *encoder) ++{ ++ return container_of(encoder, struct vc4_dsi_encoder, base.base); ++} ++ ++/* VC4 DSI connector KMS struct */ ++struct vc4_dsi_connector { ++ struct drm_connector base; ++ struct vc4_dsi *dsi; ++}; ++ ++static inline struct vc4_dsi_connector * ++to_vc4_dsi_connector(struct drm_connector *connector) ++{ ++ return container_of(connector, struct vc4_dsi_connector, base); ++} ++ ++#define DSI_REG(reg) { reg, #reg } ++static const struct { ++ u32 reg; ++ const char *name; ++} dsi0_regs[] = { ++ DSI_REG(DSI0_CTRL), ++ DSI_REG(DSI0_STAT), ++ DSI_REG(DSI0_HSTX_TO_CNT), ++ DSI_REG(DSI0_LPRX_TO_CNT), ++ DSI_REG(DSI0_TA_TO_CNT), ++ DSI_REG(DSI0_PR_TO_CNT), ++ DSI_REG(DSI0_DISP0_CTRL), ++ DSI_REG(DSI0_DISP1_CTRL), ++ DSI_REG(DSI0_INT_STAT), ++ DSI_REG(DSI0_INT_EN), ++ DSI_REG(DSI0_PHYC), ++ DSI_REG(DSI0_HS_CLT0), ++ DSI_REG(DSI0_HS_CLT1), ++ DSI_REG(DSI0_HS_CLT2), ++ DSI_REG(DSI0_HS_DLT3), ++ DSI_REG(DSI0_HS_DLT4), ++ DSI_REG(DSI0_HS_DLT5), ++ DSI_REG(DSI0_HS_DLT6), ++ DSI_REG(DSI0_HS_DLT7), ++ DSI_REG(DSI0_PHY_AFEC0), ++ DSI_REG(DSI0_PHY_AFEC1), ++ DSI_REG(DSI0_ID), ++}; ++ ++static const struct { ++ u32 reg; ++ const char *name; ++} dsi1_regs[] = { ++ DSI_REG(DSI1_CTRL), ++ DSI_REG(DSI1_STAT), ++ DSI_REG(DSI1_HSTX_TO_CNT), ++ DSI_REG(DSI1_LPRX_TO_CNT), ++ DSI_REG(DSI1_TA_TO_CNT), ++ DSI_REG(DSI1_PR_TO_CNT), ++ DSI_REG(DSI1_DISP0_CTRL), ++ DSI_REG(DSI1_DISP1_CTRL), ++ DSI_REG(DSI1_INT_STAT), ++ DSI_REG(DSI1_INT_EN), ++ DSI_REG(DSI1_PHYC), ++ DSI_REG(DSI1_HS_CLT0), ++ DSI_REG(DSI1_HS_CLT1), ++ DSI_REG(DSI1_HS_CLT2), ++ DSI_REG(DSI1_HS_DLT3), ++ DSI_REG(DSI1_HS_DLT4), ++ DSI_REG(DSI1_HS_DLT5), ++ DSI_REG(DSI1_HS_DLT6), ++ DSI_REG(DSI1_HS_DLT7), ++ DSI_REG(DSI1_PHY_AFEC0), ++ DSI_REG(DSI1_PHY_AFEC1), ++ DSI_REG(DSI1_ID), ++}; ++ ++static void vc4_dsi_dump_regs(struct vc4_dsi *dsi) ++{ ++ int i; ++ ++ if (dsi->port == 0) { ++ for (i = 0; i < ARRAY_SIZE(dsi0_regs); i++) { ++ DRM_INFO("0x%04x (%s): 0x%08x\n", ++ dsi0_regs[i].reg, dsi0_regs[i].name, ++ DSI_READ(dsi0_regs[i].reg)); ++ } ++ } else { ++ for (i = 0; i < ARRAY_SIZE(dsi1_regs); i++) { ++ DRM_INFO("0x%04x (%s): 0x%08x\n", ++ dsi1_regs[i].reg, dsi1_regs[i].name, ++ DSI_READ(dsi1_regs[i].reg)); ++ } ++ } ++} ++ ++#ifdef CONFIG_DEBUG_FS ++int vc4_dsi_debugfs_regs(struct seq_file *m, void *unused) ++{ ++ struct drm_info_node *node = (struct drm_info_node *)m->private; ++ struct drm_device *drm = node->minor->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ int dsi_index = (uintptr_t)node->info_ent->data; ++ struct vc4_dsi *dsi = (dsi_index == 1 ? vc4->dsi1 : NULL); ++ int i; ++ ++ if (!dsi) ++ return 0; ++ ++ if (dsi->port == 0) { ++ for (i = 0; i < ARRAY_SIZE(dsi0_regs); i++) { ++ seq_printf(m, "0x%04x (%s): 0x%08x\n", ++ dsi0_regs[i].reg, dsi0_regs[i].name, ++ DSI_READ(dsi0_regs[i].reg)); ++ } ++ } else { ++ for (i = 0; i < ARRAY_SIZE(dsi1_regs); i++) { ++ seq_printf(m, "0x%04x (%s): 0x%08x\n", ++ dsi1_regs[i].reg, dsi1_regs[i].name, ++ DSI_READ(dsi1_regs[i].reg)); ++ } ++ } ++ ++ return 0; ++} ++#endif ++ ++static enum drm_connector_status ++vc4_dsi_connector_detect(struct drm_connector *connector, bool force) ++{ ++ struct vc4_dsi_connector *vc4_connector = ++ to_vc4_dsi_connector(connector); ++ struct vc4_dsi *dsi = vc4_connector->dsi; ++ ++ if (dsi->panel) ++ return connector_status_connected; ++ else ++ return connector_status_disconnected; ++} ++ ++static void vc4_dsi_connector_destroy(struct drm_connector *connector) ++{ ++ drm_connector_unregister(connector); ++ drm_connector_cleanup(connector); ++} ++ ++static int vc4_dsi_connector_get_modes(struct drm_connector *connector) ++{ ++ struct vc4_dsi_connector *vc4_connector = ++ to_vc4_dsi_connector(connector); ++ struct vc4_dsi *dsi = vc4_connector->dsi; ++ ++ if (dsi->panel) ++ return drm_panel_get_modes(dsi->panel); ++ ++ return 0; ++} ++ ++static const struct drm_connector_funcs vc4_dsi_connector_funcs = { ++ .dpms = drm_atomic_helper_connector_dpms, ++ .detect = vc4_dsi_connector_detect, ++ .fill_modes = drm_helper_probe_single_connector_modes, ++ .destroy = vc4_dsi_connector_destroy, ++ .reset = drm_atomic_helper_connector_reset, ++ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, ++}; ++ ++static const struct drm_connector_helper_funcs vc4_dsi_connector_helper_funcs = { ++ .get_modes = vc4_dsi_connector_get_modes, ++}; ++ ++static struct drm_connector *vc4_dsi_connector_init(struct drm_device *dev, ++ struct vc4_dsi *dsi) ++{ ++ struct drm_connector *connector = NULL; ++ struct vc4_dsi_connector *dsi_connector; ++ int ret = 0; ++ ++ dsi_connector = devm_kzalloc(dev->dev, sizeof(*dsi_connector), ++ GFP_KERNEL); ++ if (!dsi_connector) { ++ ret = -ENOMEM; ++ goto fail; ++ } ++ connector = &dsi_connector->base; ++ ++ dsi_connector->dsi = dsi; ++ ++ drm_connector_init(dev, connector, &vc4_dsi_connector_funcs, ++ DRM_MODE_CONNECTOR_DSI); ++ drm_connector_helper_add(connector, &vc4_dsi_connector_helper_funcs); ++ ++ connector->polled = 0; ++ connector->interlace_allowed = 0; ++ connector->doublescan_allowed = 0; ++ ++ drm_mode_connector_attach_encoder(connector, dsi->encoder); ++ ++ return connector; ++ ++fail: ++ if (connector) ++ vc4_dsi_connector_destroy(connector); ++ ++ return ERR_PTR(ret); ++} ++ ++static void vc4_dsi_encoder_destroy(struct drm_encoder *encoder) ++{ ++ drm_encoder_cleanup(encoder); ++} ++ ++static const struct drm_encoder_funcs vc4_dsi_encoder_funcs = { ++ .destroy = vc4_dsi_encoder_destroy, ++}; ++ ++static void vc4_dsi_latch_ulps(struct vc4_dsi *dsi, bool latch) ++{ ++ u32 afec0 = DSI_PORT_READ(PHY_AFEC0); ++ ++ if (latch) ++ afec0 |= DSI_PORT_BIT(PHY_AFEC0_LATCH_ULPS); ++ else ++ afec0 &= ~DSI_PORT_BIT(PHY_AFEC0_LATCH_ULPS); ++ ++ DSI_PORT_WRITE(PHY_AFEC0, afec0); ++} ++ ++/* Enters or exits Ultra Low Power State. */ ++static void vc4_dsi_ulps(struct vc4_dsi *dsi, bool ulps) ++{ ++ bool continuous = dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS; ++ u32 phyc_ulps = ((continuous ? DSI_PORT_BIT(PHYC_CLANE_ULPS) : 0) | ++ DSI_PHYC_DLANE0_ULPS | ++ (dsi->lanes > 1 ? DSI_PHYC_DLANE1_ULPS : 0) | ++ (dsi->lanes > 2 ? DSI_PHYC_DLANE2_ULPS : 0) | ++ (dsi->lanes > 3 ? DSI_PHYC_DLANE3_ULPS : 0)); ++ u32 stat_ulps = ((continuous ? DSI1_STAT_PHY_CLOCK_ULPS : 0) | ++ DSI1_STAT_PHY_D0_ULPS | ++ (dsi->lanes > 1 ? DSI1_STAT_PHY_D1_ULPS : 0) | ++ (dsi->lanes > 2 ? DSI1_STAT_PHY_D2_ULPS : 0) | ++ (dsi->lanes > 3 ? DSI1_STAT_PHY_D3_ULPS : 0)); ++ u32 stat_stop = ((continuous ? DSI1_STAT_PHY_CLOCK_STOP : 0) | ++ DSI1_STAT_PHY_D0_STOP | ++ (dsi->lanes > 1 ? DSI1_STAT_PHY_D1_STOP : 0) | ++ (dsi->lanes > 2 ? DSI1_STAT_PHY_D2_STOP : 0) | ++ (dsi->lanes > 3 ? DSI1_STAT_PHY_D3_STOP : 0)); ++ int ret; ++ ++ DSI_PORT_WRITE(STAT, stat_ulps); ++ DSI_PORT_WRITE(PHYC, DSI_PORT_READ(PHYC) | phyc_ulps); ++ ret = wait_for((DSI_PORT_READ(STAT) & stat_ulps) == stat_ulps, 200); ++ if (ret) { ++ dev_warn(&dsi->pdev->dev, ++ "Timeout waiting for DSI ULPS entry: STAT 0x%08x", ++ DSI_PORT_READ(STAT)); ++ DSI_PORT_WRITE(PHYC, DSI_PORT_READ(PHYC) & ~phyc_ulps); ++ vc4_dsi_latch_ulps(dsi, false); ++ return; ++ } ++ ++ /* The DSI module can't be disabled while the module is ++ * generating ULPS state. So, to be able to disable the ++ * module, we have the AFE latch the ULPS state and continue ++ * on to having the module enter STOP. ++ */ ++ vc4_dsi_latch_ulps(dsi, ulps); ++ ++ DSI_PORT_WRITE(STAT, stat_stop); ++ DSI_PORT_WRITE(PHYC, DSI_PORT_READ(PHYC) & ~phyc_ulps); ++ ret = wait_for((DSI_PORT_READ(STAT) & stat_stop) == stat_stop, 200); ++ if (ret) { ++ dev_warn(&dsi->pdev->dev, ++ "Timeout waiting for DSI STOP entry: STAT 0x%08x", ++ DSI_PORT_READ(STAT)); ++ DSI_PORT_WRITE(PHYC, DSI_PORT_READ(PHYC) & ~phyc_ulps); ++ return; ++ } ++} ++ ++static u32 ++dsi_hs_timing(u32 ui_ns, u32 ns, u32 ui) ++{ ++ /* The HS timings have to be rounded up to a multiple of 8 ++ * because we're using the byte clock. ++ */ ++ return roundup(ui + DIV_ROUND_UP(ns, ui_ns), 8); ++} ++ ++/* ESC always runs at 100Mhz. */ ++#define ESC_TIME_NS 10 ++ ++static u32 ++dsi_esc_timing(u32 ns) ++{ ++ return DIV_ROUND_UP(ns, ESC_TIME_NS); ++} ++ ++static void vc4_dsi_encoder_disable(struct drm_encoder *encoder) ++{ ++ struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder); ++ struct vc4_dsi *dsi = vc4_encoder->dsi; ++ struct device *dev = &dsi->pdev->dev; ++ ++ drm_panel_disable(dsi->panel); ++ ++ vc4_dsi_ulps(dsi, true); ++ ++ drm_panel_unprepare(dsi->panel); ++ ++ clk_disable_unprepare(dsi->pll_phy_clock); ++ clk_disable_unprepare(dsi->escape_clock); ++ clk_disable_unprepare(dsi->pixel_clock); ++ ++ pm_runtime_put(dev); ++} ++ ++static void vc4_dsi_encoder_enable(struct drm_encoder *encoder) ++{ ++ struct drm_display_mode *mode = &encoder->crtc->mode; ++ struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder); ++ struct vc4_dsi *dsi = vc4_encoder->dsi; ++ struct device *dev = &dsi->pdev->dev; ++ u32 format = 0, divider = 0; ++ bool debug_dump_regs = false; ++ unsigned long hs_clock; ++ u32 ui_ns; ++ /* Minimum LP state duration in escape clock cycles. */ ++ u32 lpx = dsi_esc_timing(60); ++ unsigned long pixel_clock_hz = mode->clock * 1000; ++ unsigned long dsip_clock; ++ unsigned long phy_clock; ++ int ret; ++ ++ ret = pm_runtime_get_sync(dev); ++ if (ret) { ++ DRM_ERROR("Failed to runtime PM enable on DSI%d\n", dsi->port); ++ return; ++ } ++ ++ ret = drm_panel_prepare(dsi->panel); ++ if (ret) { ++ DRM_ERROR("Panel failed to prepare\n"); ++ return; ++ } ++ ++ if (debug_dump_regs) { ++ DRM_INFO("DSI regs before:\n"); ++ vc4_dsi_dump_regs(dsi); ++ } ++ ++ switch (dsi->format) { ++ case MIPI_DSI_FMT_RGB888: ++ format = DSI_PFORMAT_RGB888; ++ divider = 24 / dsi->lanes; ++ break; ++ case MIPI_DSI_FMT_RGB666: ++ format = DSI_PFORMAT_RGB666; ++ divider = 24 / dsi->lanes; ++ break; ++ case MIPI_DSI_FMT_RGB666_PACKED: ++ format = DSI_PFORMAT_RGB666_PACKED; ++ divider = 18 / dsi->lanes; ++ break; ++ case MIPI_DSI_FMT_RGB565: ++ format = DSI_PFORMAT_RGB565; ++ divider = 16 / dsi->lanes; ++ break; ++ } ++ ++ phy_clock = pixel_clock_hz * divider; ++ ret = clk_set_rate(dsi->pll_phy_clock, phy_clock); ++ if (ret) { ++ dev_err(&dsi->pdev->dev, ++ "Failed to set phy clock to %ld: %d\n", phy_clock, ret); ++ } ++ ++ /* Reset the DSI and all its fifos. */ ++ DSI_PORT_WRITE(CTRL, ++ DSI_CTRL_SOFT_RESET_CFG | ++ DSI_PORT_BIT(CTRL_RESET_FIFOS)); ++ ++ DSI_PORT_WRITE(CTRL, ++ DSI_CTRL_HSDT_EOT_DISABLE | ++ DSI_CTRL_RX_LPDT_EOT_DISABLE); ++ ++ /* Clear all stat bits so we see what has happened during enable. */ ++ DSI_PORT_WRITE(STAT, DSI_PORT_READ(STAT)); ++ ++ /* Set AFE CTR00/CTR1 to release powerdown of analog. */ ++ if (dsi->port == 0) { ++ u32 afec0 = (VC4_SET_FIELD(7, DSI_PHY_AFEC0_PTATADJ) | ++ VC4_SET_FIELD(7, DSI_PHY_AFEC0_CTATADJ)); ++ ++ if (dsi->lanes < 2) ++ afec0 |= DSI0_PHY_AFEC0_PD_DLANE1; ++ ++ if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO)) ++ afec0 |= DSI0_PHY_AFEC0_RESET; ++ ++ DSI_PORT_WRITE(PHY_AFEC0, afec0); ++ ++ DSI_PORT_WRITE(PHY_AFEC1, ++ VC4_SET_FIELD(6, DSI0_PHY_AFEC1_IDR_DLANE1) | ++ VC4_SET_FIELD(6, DSI0_PHY_AFEC1_IDR_DLANE0) | ++ VC4_SET_FIELD(6, DSI0_PHY_AFEC1_IDR_CLANE)); ++ } else { ++ u32 afec0 = (VC4_SET_FIELD(7, DSI_PHY_AFEC0_PTATADJ) | ++ VC4_SET_FIELD(7, DSI_PHY_AFEC0_CTATADJ) | ++ VC4_SET_FIELD(6, DSI1_PHY_AFEC0_IDR_CLANE) | ++ VC4_SET_FIELD(6, DSI1_PHY_AFEC0_IDR_DLANE0) | ++ VC4_SET_FIELD(6, DSI1_PHY_AFEC0_IDR_DLANE1) | ++ VC4_SET_FIELD(6, DSI1_PHY_AFEC0_IDR_DLANE2) | ++ VC4_SET_FIELD(6, DSI1_PHY_AFEC0_IDR_DLANE3)); ++ ++ if (dsi->lanes < 4) ++ afec0 |= DSI1_PHY_AFEC0_PD_DLANE3; ++ if (dsi->lanes < 3) ++ afec0 |= DSI1_PHY_AFEC0_PD_DLANE2; ++ if (dsi->lanes < 2) ++ afec0 |= DSI1_PHY_AFEC0_PD_DLANE1; ++ ++ afec0 |= DSI1_PHY_AFEC0_RESET; ++ ++ DSI_PORT_WRITE(PHY_AFEC0, afec0); ++ ++ DSI_PORT_WRITE(PHY_AFEC1, 0); ++ ++ /* AFEC reset hold time */ ++ mdelay(1); ++ } ++ ++ ret = clk_prepare_enable(dsi->escape_clock); ++ if (ret) { ++ DRM_ERROR("Failed to turn on DSI escape clock: %d\n", ret); ++ return; ++ } ++ ++ ret = clk_prepare_enable(dsi->pll_phy_clock); ++ if (ret) { ++ DRM_ERROR("Failed to turn on DSI PLL: %d\n", ret); ++ return; ++ } ++ ++ hs_clock = clk_get_rate(dsi->pll_phy_clock); ++ ++ /* Yes, we set the DSI0P/DSI1P pixel clock to the byte rate, ++ * not the pixel clock rate. DSIxP take from the APHY's byte, ++ * DDR2, or DDR4 clock (we use byte) and feed into the PV at ++ * that rate. Separately, a value derived from PIX_CLK_DIV ++ * and HS_CLKC is fed into the PV to divide down to the actual ++ * pixel clock for pushing pixels into DSI. ++ */ ++ dsip_clock = phy_clock / 8; ++ ret = clk_set_rate(dsi->pixel_clock, dsip_clock); ++ if (ret) { ++ dev_err(dev, "Failed to set pixel clock to %ldHz: %d\n", ++ dsip_clock, ret); ++ } ++ ++ ret = clk_prepare_enable(dsi->pixel_clock); ++ if (ret) { ++ DRM_ERROR("Failed to turn on DSI pixel clock: %d\n", ret); ++ return; ++ } ++ ++ /* How many ns one DSI unit interval is. Note that the clock ++ * is DDR, so there's an extra divide by 2. ++ */ ++ ui_ns = DIV_ROUND_UP(500000000, hs_clock); ++ ++ DSI_PORT_WRITE(HS_CLT0, ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 262, 0), ++ DSI_HS_CLT0_CZERO) | ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 0, 8), ++ DSI_HS_CLT0_CPRE) | ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 38, 0), ++ DSI_HS_CLT0_CPREP)); ++ ++ DSI_PORT_WRITE(HS_CLT1, ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 60, 0), ++ DSI_HS_CLT1_CTRAIL) | ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 60, 52), ++ DSI_HS_CLT1_CPOST)); ++ ++ DSI_PORT_WRITE(HS_CLT2, ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 1000000, 0), ++ DSI_HS_CLT2_WUP)); ++ ++ DSI_PORT_WRITE(HS_DLT3, ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 100, 0), ++ DSI_HS_DLT3_EXIT) | ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 105, 6), ++ DSI_HS_DLT3_ZERO) | ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, 40, 4), ++ DSI_HS_DLT3_PRE)); ++ ++ DSI_PORT_WRITE(HS_DLT4, ++ VC4_SET_FIELD(dsi_hs_timing(ui_ns, lpx * ESC_TIME_NS, 0), ++ DSI_HS_DLT4_LPX) | ++ VC4_SET_FIELD(max(dsi_hs_timing(ui_ns, 0, 8), ++ dsi_hs_timing(ui_ns, 60, 4)), ++ DSI_HS_DLT4_TRAIL) | ++ VC4_SET_FIELD(0, DSI_HS_DLT4_ANLAT)); ++ ++ DSI_PORT_WRITE(HS_DLT5, VC4_SET_FIELD(dsi_hs_timing(ui_ns, 1000, 5000), ++ DSI_HS_DLT5_INIT)); ++ ++ DSI_PORT_WRITE(HS_DLT6, ++ VC4_SET_FIELD(lpx * 5, DSI_HS_DLT6_TA_GET) | ++ VC4_SET_FIELD(lpx, DSI_HS_DLT6_TA_SURE) | ++ VC4_SET_FIELD(lpx * 4, DSI_HS_DLT6_TA_GO) | ++ VC4_SET_FIELD(lpx, DSI_HS_DLT6_LP_LPX)); ++ ++ DSI_PORT_WRITE(HS_DLT7, ++ VC4_SET_FIELD(dsi_esc_timing(1000000), ++ DSI_HS_DLT7_LP_WUP)); ++ ++ DSI_PORT_WRITE(PHYC, ++ DSI_PHYC_DLANE0_ENABLE | ++ (dsi->lanes >= 2 ? DSI_PHYC_DLANE1_ENABLE : 0) | ++ (dsi->lanes >= 3 ? DSI_PHYC_DLANE2_ENABLE : 0) | ++ (dsi->lanes >= 4 ? DSI_PHYC_DLANE3_ENABLE : 0) | ++ DSI_PORT_BIT(PHYC_CLANE_ENABLE) | ++ ((dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) ? ++ 0 : DSI_PORT_BIT(PHYC_HS_CLK_CONTINUOUS)) | ++ (dsi->port == 0 ? ++ VC4_SET_FIELD(lpx - 1, DSI0_PHYC_ESC_CLK_LPDT) : ++ VC4_SET_FIELD(lpx - 1, DSI1_PHYC_ESC_CLK_LPDT))); ++ ++ DSI_PORT_WRITE(CTRL, ++ DSI_PORT_READ(CTRL) | ++ DSI_CTRL_CAL_BYTE); ++ ++ /* HS timeout in HS clock cycles: disabled. */ ++ DSI_PORT_WRITE(HSTX_TO_CNT, 0); ++ /* LP receive timeout in HS clocks. */ ++ DSI_PORT_WRITE(LPRX_TO_CNT, 0xffffff); ++ /* Bus turnaround timeout */ ++ DSI_PORT_WRITE(TA_TO_CNT, 100000); ++ /* Display reset sequence timeout */ ++ DSI_PORT_WRITE(PR_TO_CNT, 100000); ++ ++ if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { ++ DSI_PORT_WRITE(DISP0_CTRL, ++ VC4_SET_FIELD(divider, DSI_DISP0_PIX_CLK_DIV) | ++ VC4_SET_FIELD(format, DSI_DISP0_PFORMAT) | ++ VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME, ++ DSI_DISP0_LP_STOP_CTRL) | ++ DSI_DISP0_ST_END | ++ DSI_DISP0_ENABLE); ++ } else { ++ DSI_PORT_WRITE(DISP0_CTRL, ++ DSI_DISP0_COMMAND_MODE | ++ DSI_DISP0_ENABLE); ++ } ++ ++ /* Set up DISP1 for transferring long command payloads through ++ * the pixfifo. ++ */ ++ DSI_PORT_WRITE(DISP1_CTRL, ++ VC4_SET_FIELD(DSI_DISP1_PFORMAT_32BIT_LE, ++ DSI_DISP1_PFORMAT) | ++ DSI_DISP1_ENABLE); ++ ++ /* Ungate the block. */ ++ if (dsi->port == 0) ++ DSI_PORT_WRITE(CTRL, DSI_PORT_READ(CTRL) | DSI0_CTRL_CTRL0); ++ else ++ DSI_PORT_WRITE(CTRL, DSI_PORT_READ(CTRL) | DSI1_CTRL_EN); ++ ++ /* Bring AFE out of reset. */ ++ if (dsi->port == 0) { ++ } else { ++ DSI_PORT_WRITE(PHY_AFEC0, ++ DSI_PORT_READ(PHY_AFEC0) & ++ ~DSI1_PHY_AFEC0_RESET); ++ } ++ ++ vc4_dsi_ulps(dsi, false); ++ ++ if (debug_dump_regs) { ++ DRM_INFO("DSI regs after:\n"); ++ vc4_dsi_dump_regs(dsi); ++ } ++ ++ ret = drm_panel_enable(dsi->panel); ++ if (ret) { ++ DRM_ERROR("Panel failed to enable\n"); ++ drm_panel_unprepare(dsi->panel); ++ return; ++ } ++} ++ ++static ssize_t vc4_dsi_host_transfer(struct mipi_dsi_host *host, ++ const struct mipi_dsi_msg *msg) ++{ ++ struct vc4_dsi *dsi = host_to_dsi(host); ++ struct mipi_dsi_packet packet; ++ u32 pkth = 0, pktc = 0; ++ int i, ret; ++ bool is_long = mipi_dsi_packet_format_is_long(msg->type); ++ u32 cmd_fifo_len = 0, pix_fifo_len = 0; ++ ++ mipi_dsi_create_packet(&packet, msg); ++ ++ pkth |= VC4_SET_FIELD(packet.header[0], DSI_TXPKT1H_BC_DT); ++ pkth |= VC4_SET_FIELD(packet.header[1] | ++ (packet.header[2] << 8), ++ DSI_TXPKT1H_BC_PARAM); ++ if (is_long) { ++ /* Divide data across the various FIFOs we have available. ++ * The command FIFO takes byte-oriented data, but is of ++ * limited size. The pixel FIFO (never actually used for ++ * pixel data in reality) is word oriented, and substantially ++ * larger. So, we use the pixel FIFO for most of the data, ++ * sending the residual bytes in the command FIFO at the start. ++ * ++ * With this arrangement, the command FIFO will never get full. ++ */ ++ if (packet.payload_length <= 16) { ++ cmd_fifo_len = packet.payload_length; ++ pix_fifo_len = 0; ++ } else { ++ cmd_fifo_len = (packet.payload_length % ++ DSI_PIX_FIFO_WIDTH); ++ pix_fifo_len = ((packet.payload_length - cmd_fifo_len) / ++ DSI_PIX_FIFO_WIDTH); ++ } ++ ++ WARN_ON_ONCE(pix_fifo_len >= DSI_PIX_FIFO_DEPTH); ++ ++ pkth |= VC4_SET_FIELD(cmd_fifo_len, DSI_TXPKT1H_BC_CMDFIFO); ++ } ++ ++ if (msg->rx_len) { ++ pktc |= VC4_SET_FIELD(DSI_TXPKT1C_CMD_CTRL_RX, ++ DSI_TXPKT1C_CMD_CTRL); ++ } else { ++ pktc |= VC4_SET_FIELD(DSI_TXPKT1C_CMD_CTRL_TX, ++ DSI_TXPKT1C_CMD_CTRL); ++ } ++ ++ for (i = 0; i < cmd_fifo_len; i++) ++ DSI_PORT_WRITE(TXPKT_CMD_FIFO, packet.payload[i]); ++ for (i = 0; i < pix_fifo_len; i++) { ++ const u8 *pix = packet.payload + cmd_fifo_len + i * 4; ++ ++ DSI_PORT_WRITE(TXPKT_PIX_FIFO, ++ pix[0] | ++ pix[1] << 8 | ++ pix[2] << 16 | ++ pix[3] << 24); ++ } ++ ++ if (msg->flags & MIPI_DSI_MSG_USE_LPM) ++ pktc |= DSI_TXPKT1C_CMD_MODE_LP; ++ if (is_long) ++ pktc |= DSI_TXPKT1C_CMD_TYPE_LONG; ++ ++ /* Send one copy of the packet. Larger repeats are used for pixel ++ * data in command mode. ++ */ ++ pktc |= VC4_SET_FIELD(1, DSI_TXPKT1C_CMD_REPEAT); ++ ++ pktc |= DSI_TXPKT1C_CMD_EN; ++ if (pix_fifo_len) { ++ pktc |= VC4_SET_FIELD(DSI_TXPKT1C_DISPLAY_NO_SECONDARY, ++ DSI_TXPKT1C_DISPLAY_NO); ++ } else { ++ pktc |= VC4_SET_FIELD(DSI_TXPKT1C_DISPLAY_NO_SHORT, ++ DSI_TXPKT1C_DISPLAY_NO); ++ } ++ ++ /* Enable the appropriate interrupt for the transfer completion. */ ++ dsi->xfer_result = 0; ++ reinit_completion(&dsi->xfer_completion); ++ DSI_PORT_WRITE(INT_STAT, DSI1_INT_TXPKT1_DONE | DSI1_INT_PHY_DIR_RTF); ++ if (msg->rx_len) { ++ DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED | ++ DSI1_INT_PHY_DIR_RTF)); ++ } else { ++ DSI_PORT_WRITE(INT_EN, (DSI1_INTERRUPTS_ALWAYS_ENABLED | ++ DSI1_INT_TXPKT1_DONE)); ++ } ++ ++ /* Send the packet. */ ++ DSI_PORT_WRITE(TXPKT1H, pkth); ++ DSI_PORT_WRITE(TXPKT1C, pktc); ++ ++ if (!wait_for_completion_timeout(&dsi->xfer_completion, ++ msecs_to_jiffies(1000))) { ++ dev_err(&dsi->pdev->dev, "transfer interrupt wait timeout"); ++ dev_err(&dsi->pdev->dev, "instat: 0x%08x\n", ++ DSI_PORT_READ(INT_STAT)); ++ ret = -ETIMEDOUT; ++ } else { ++ ret = dsi->xfer_result; ++ } ++ ++ DSI_PORT_WRITE(INT_EN, DSI1_INTERRUPTS_ALWAYS_ENABLED); ++ ++ if (ret) ++ goto reset_fifo_and_return; ++ ++ if (ret == 0 && msg->rx_len) { ++ u32 rxpkt1h = DSI_PORT_READ(RXPKT1H); ++ u8 *msg_rx = msg->rx_buf; ++ ++ if (rxpkt1h & DSI_RXPKT1H_PKT_TYPE_LONG) { ++ u32 rxlen = VC4_GET_FIELD(rxpkt1h, ++ DSI_RXPKT1H_BC_PARAM); ++ ++ if (rxlen != msg->rx_len) { ++ DRM_ERROR("DSI returned %db, expecting %db\n", ++ rxlen, (int)msg->rx_len); ++ ret = -ENXIO; ++ goto reset_fifo_and_return; ++ } ++ ++ for (i = 0; i < msg->rx_len; i++) ++ msg_rx[i] = DSI_READ(DSI1_RXPKT_FIFO); ++ } else { ++ /* FINISHME: Handle AWER */ ++ ++ msg_rx[0] = VC4_GET_FIELD(rxpkt1h, ++ DSI_RXPKT1H_SHORT_0); ++ if (msg->rx_len > 1) { ++ msg_rx[1] = VC4_GET_FIELD(rxpkt1h, ++ DSI_RXPKT1H_SHORT_1); ++ } ++ } ++ } ++ ++ return ret; ++ ++reset_fifo_and_return: ++ DRM_ERROR("DSI transfer failed, resetting: %d\n", ret); ++ ++ DSI_PORT_WRITE(TXPKT1C, DSI_PORT_READ(TXPKT1C) & ~DSI_TXPKT1C_CMD_EN); ++ udelay(1); ++ DSI_PORT_WRITE(CTRL, ++ DSI_PORT_READ(CTRL) | ++ DSI_PORT_BIT(CTRL_RESET_FIFOS)); ++ ++ DSI_PORT_WRITE(TXPKT1C, 0); ++ DSI_PORT_WRITE(INT_EN, DSI1_INTERRUPTS_ALWAYS_ENABLED); ++ return ret; ++} ++ ++static int vc4_dsi_host_attach(struct mipi_dsi_host *host, ++ struct mipi_dsi_device *device) ++{ ++ struct vc4_dsi *dsi = host_to_dsi(host); ++ int ret = 0; ++ ++ dsi->lanes = device->lanes; ++ dsi->channel = device->channel; ++ dsi->format = device->format; ++ dsi->mode_flags = device->mode_flags; ++ ++ if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO)) { ++ dev_err(&dsi->pdev->dev, ++ "Only VIDEO mode panels supported currently.\n"); ++ return 0; ++ } ++ ++ dsi->panel = of_drm_find_panel(device->dev.of_node); ++ if (!dsi->panel) ++ return 0; ++ ++ ret = drm_panel_attach(dsi->panel, dsi->connector); ++ if (ret != 0) ++ return ret; ++ ++ drm_helper_hpd_irq_event(dsi->connector->dev); ++ ++ return 0; ++} ++ ++static int vc4_dsi_host_detach(struct mipi_dsi_host *host, ++ struct mipi_dsi_device *device) ++{ ++ struct vc4_dsi *dsi = host_to_dsi(host); ++ ++ if (dsi->panel) { ++ int ret = drm_panel_detach(dsi->panel); ++ ++ if (ret) ++ return ret; ++ ++ dsi->panel = NULL; ++ ++ drm_helper_hpd_irq_event(dsi->connector->dev); ++ } ++ ++ return 0; ++} ++ ++static const struct mipi_dsi_host_ops vc4_dsi_host_ops = { ++ .attach = vc4_dsi_host_attach, ++ .detach = vc4_dsi_host_detach, ++ .transfer = vc4_dsi_host_transfer, ++}; ++ ++static const struct drm_encoder_helper_funcs vc4_dsi_encoder_helper_funcs = { ++ .disable = vc4_dsi_encoder_disable, ++ .enable = vc4_dsi_encoder_enable, ++}; ++ ++static const struct of_device_id vc4_dsi_dt_match[] = { ++ { .compatible = "brcm,bcm2835-dsi1", (void *)(uintptr_t)1 }, ++ {} ++}; ++ ++static void dsi_handle_error(struct vc4_dsi *dsi, ++ irqreturn_t *ret, u32 stat, u32 bit, ++ const char *type) ++{ ++ if (!(stat & bit)) ++ return; ++ ++ DRM_ERROR("DSI%d: %s error\n", dsi->port, type); ++ *ret = IRQ_HANDLED; ++} ++ ++static irqreturn_t vc4_dsi_irq_handler(int irq, void *data) ++{ ++ struct vc4_dsi *dsi = data; ++ u32 stat = DSI_PORT_READ(INT_STAT); ++ irqreturn_t ret = IRQ_NONE; ++ ++ DSI_PORT_WRITE(INT_STAT, stat); ++ ++ dsi_handle_error(dsi, &ret, stat, ++ DSI1_INT_ERR_SYNC_ESC, "LPDT sync"); ++ dsi_handle_error(dsi, &ret, stat, ++ DSI1_INT_ERR_CONTROL, "data lane 0 sequence"); ++ dsi_handle_error(dsi, &ret, stat, ++ DSI1_INT_ERR_CONT_LP0, "LP0 contention"); ++ dsi_handle_error(dsi, &ret, stat, ++ DSI1_INT_ERR_CONT_LP1, "LP1 contention"); ++ dsi_handle_error(dsi, &ret, stat, ++ DSI1_INT_HSTX_TO, "HSTX timeout"); ++ dsi_handle_error(dsi, &ret, stat, ++ DSI1_INT_LPRX_TO, "LPRX timeout"); ++ dsi_handle_error(dsi, &ret, stat, ++ DSI1_INT_TA_TO, "turnaround timeout"); ++ dsi_handle_error(dsi, &ret, stat, ++ DSI1_INT_PR_TO, "peripheral reset timeout"); ++ ++ if (stat & (DSI1_INT_TXPKT1_DONE | DSI1_INT_PHY_DIR_RTF)) { ++ complete(&dsi->xfer_completion); ++ ret = IRQ_HANDLED; ++ } else if (stat & DSI1_INT_HSTX_TO) { ++ complete(&dsi->xfer_completion); ++ dsi->xfer_result = -ETIMEDOUT; ++ ret = IRQ_HANDLED; ++ } ++ ++ return ret; ++} ++ ++/** ++ * Exposes clocks generated by the analog PHY that are consumed by ++ * CPRMAN (clk-bcm2835.c). ++ */ ++static int ++vc4_dsi_init_phy_clocks(struct vc4_dsi *dsi) ++{ ++ struct device *dev = &dsi->pdev->dev; ++ const char *parent_name = __clk_get_name(dsi->pll_phy_clock); ++ static const struct { ++ const char *dsi0_name, *dsi1_name; ++ int div; ++ } phy_clocks[] = { ++ { "dsi0_byte", "dsi1_byte", 8 }, ++ { "dsi0_ddr2", "dsi1_ddr2", 4 }, ++ { "dsi0_ddr", "dsi1_ddr", 2 }, ++ }; ++ int i; ++ ++ dsi->clk_onecell.clk_num = ARRAY_SIZE(phy_clocks); ++ dsi->clk_onecell.clks = devm_kcalloc(dev, ++ dsi->clk_onecell.clk_num, ++ sizeof(*dsi->clk_onecell.clks), ++ GFP_KERNEL); ++ if (!dsi->clk_onecell.clks) ++ return -ENOMEM; ++ ++ for (i = 0; i < ARRAY_SIZE(phy_clocks); i++) { ++ struct clk_fixed_factor *fix = &dsi->phy_clocks[i]; ++ struct clk_init_data init; ++ struct clk *clk; ++ ++ /* We just use core fixed factor clock ops for the PHY ++ * clocks. The clocks are actually gated by the ++ * PHY_AFEC0_DDRCLK_EN bits, which we should be ++ * setting if we use the DDR/DDR2 clocks. However, ++ * vc4_dsi_encoder_enable() is setting up both AFEC0, ++ * setting both our parent DSI PLL's rate and this ++ * clock's rate, so it knows if DDR/DDR2 are going to ++ * be used and could enable the gates itself. ++ */ ++ fix->mult = 1; ++ fix->div = phy_clocks[i].div; ++ fix->hw.init = &init; ++ ++ memset(&init, 0, sizeof(init)); ++ init.parent_names = &parent_name; ++ init.num_parents = 1; ++ if (dsi->port == 1) ++ init.name = phy_clocks[i].dsi1_name; ++ else ++ init.name = phy_clocks[i].dsi0_name; ++ init.ops = &clk_fixed_factor_ops; ++ init.flags = CLK_IS_BASIC; ++ ++ clk = devm_clk_register(dev, &fix->hw); ++ if (IS_ERR(clk)) ++ return PTR_ERR(clk); ++ ++ dsi->clk_onecell.clks[i] = clk; ++ } ++ ++ return of_clk_add_provider(dev->of_node, ++ of_clk_src_onecell_get, ++ &dsi->clk_onecell); ++} ++ ++static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct drm_device *drm = dev_get_drvdata(master); ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ struct vc4_dsi *dsi; ++ struct vc4_dsi_encoder *vc4_dsi_encoder; ++ const struct of_device_id *match; ++ dma_cap_mask_t dma_mask; ++ int ret; ++ ++ dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL); ++ if (!dsi) ++ return -ENOMEM; ++ ++ match = of_match_device(vc4_dsi_dt_match, dev); ++ if (!match) ++ return -ENODEV; ++ ++ dsi->port = (uintptr_t)match->data; ++ ++ vc4_dsi_encoder = devm_kzalloc(dev, sizeof(*vc4_dsi_encoder), ++ GFP_KERNEL); ++ if (!vc4_dsi_encoder) ++ return -ENOMEM; ++ vc4_dsi_encoder->base.type = VC4_ENCODER_TYPE_DSI1; ++ vc4_dsi_encoder->dsi = dsi; ++ dsi->encoder = &vc4_dsi_encoder->base.base; ++ ++ dsi->pdev = pdev; ++ dsi->regs = vc4_ioremap_regs(pdev, 0); ++ if (IS_ERR(dsi->regs)) ++ return PTR_ERR(dsi->regs); ++ ++ if (DSI_PORT_READ(ID) != DSI_ID_VALUE) { ++ dev_err(dev, "Port returned 0x%08x for ID instead of 0x%08x\n", ++ DSI_PORT_READ(ID), DSI_ID_VALUE); ++ return -ENODEV; ++ } ++ ++ /* DSI1 has a broken AXI slave that doesn't respond to writes ++ * from the ARM. It does handle writes from the DMA engine, ++ * so set up a channel for talking to it. ++ */ ++ if (dsi->port == 1) { ++ dsi->reg_dma_mem = dma_alloc_coherent(dev, 4, ++ &dsi->reg_dma_paddr, ++ GFP_KERNEL); ++ if (!dsi->reg_dma_mem) { ++ DRM_ERROR("Failed to get DMA memory\n"); ++ return -ENOMEM; ++ } ++ ++ dma_cap_zero(dma_mask); ++ dma_cap_set(DMA_MEMCPY, dma_mask); ++ dsi->reg_dma_chan = dma_request_chan_by_mask(&dma_mask); ++ if (IS_ERR(dsi->reg_dma_chan)) { ++ ret = PTR_ERR(dsi->reg_dma_chan); ++ if (ret != -EPROBE_DEFER) ++ DRM_ERROR("Failed to get DMA channel: %d\n", ++ ret); ++ return ret; ++ } ++ ++ /* Get the physical address of the device's registers. The ++ * struct resource for the regs gives us the bus address ++ * instead. ++ */ ++ dsi->reg_paddr = be32_to_cpup(of_get_address(dev->of_node, ++ 0, NULL, NULL)); ++ } ++ ++ init_completion(&dsi->xfer_completion); ++ /* At startup enable error-reporting interrupts and nothing else. */ ++ DSI_PORT_WRITE(INT_EN, DSI1_INTERRUPTS_ALWAYS_ENABLED); ++ /* Clear any existing interrupt state. */ ++ DSI_PORT_WRITE(INT_STAT, DSI_PORT_READ(INT_STAT)); ++ ++ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), ++ vc4_dsi_irq_handler, 0, "vc4 dsi", dsi); ++ if (ret) { ++ if (ret != -EPROBE_DEFER) ++ dev_err(dev, "Failed to get interrupt: %d\n", ret); ++ return ret; ++ } ++ ++ dsi->escape_clock = devm_clk_get(dev, "escape"); ++ if (IS_ERR(dsi->escape_clock)) { ++ ret = PTR_ERR(dsi->escape_clock); ++ if (ret != -EPROBE_DEFER) ++ dev_err(dev, "Failed to get escape clock: %d\n", ret); ++ return ret; ++ } ++ ++ dsi->pll_phy_clock = devm_clk_get(dev, "phy"); ++ if (IS_ERR(dsi->pll_phy_clock)) { ++ ret = PTR_ERR(dsi->pll_phy_clock); ++ if (ret != -EPROBE_DEFER) ++ dev_err(dev, "Failed to get phy clock: %d\n", ret); ++ return ret; ++ } ++ ++ dsi->pixel_clock = devm_clk_get(dev, "pixel"); ++ if (IS_ERR(dsi->pixel_clock)) { ++ ret = PTR_ERR(dsi->pixel_clock); ++ if (ret != -EPROBE_DEFER) ++ dev_err(dev, "Failed to get pixel clock: %d\n", ret); ++ return ret; ++ } ++ ++ /* The esc clock rate is supposed to always be 100Mhz. */ ++ ret = clk_set_rate(dsi->escape_clock, 100 * 1000000); ++ if (ret) { ++ dev_err(dev, "Failed to set esc clock: %d\n", ret); ++ return ret; ++ } ++ ++ ret = vc4_dsi_init_phy_clocks(dsi); ++ if (ret) ++ return ret; ++ ++ if (dsi->port == 1) ++ vc4->dsi1 = dsi; ++ ++ drm_encoder_init(drm, dsi->encoder, &vc4_dsi_encoder_funcs, ++ DRM_MODE_ENCODER_DSI, NULL); ++ drm_encoder_helper_add(dsi->encoder, &vc4_dsi_encoder_helper_funcs); ++ ++ dsi->connector = vc4_dsi_connector_init(drm, dsi); ++ if (IS_ERR(dsi->connector)) { ++ ret = PTR_ERR(dsi->connector); ++ goto err_destroy_encoder; ++ } ++ ++ dsi->dsi_host.ops = &vc4_dsi_host_ops; ++ dsi->dsi_host.dev = dev; ++ ++ mipi_dsi_host_register(&dsi->dsi_host); ++ ++ dev_set_drvdata(dev, dsi); ++ ++ pm_runtime_enable(dev); ++ ++ return 0; ++ ++err_destroy_encoder: ++ vc4_dsi_encoder_destroy(dsi->encoder); ++ ++ return ret; ++} ++ ++static void vc4_dsi_unbind(struct device *dev, struct device *master, ++ void *data) ++{ ++ struct drm_device *drm = dev_get_drvdata(master); ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ struct vc4_dsi *dsi = dev_get_drvdata(dev); ++ ++ pm_runtime_disable(dev); ++ ++ vc4_dsi_connector_destroy(dsi->connector); ++ vc4_dsi_encoder_destroy(dsi->encoder); ++ ++ mipi_dsi_host_unregister(&dsi->dsi_host); ++ ++ clk_disable_unprepare(dsi->pll_phy_clock); ++ clk_disable_unprepare(dsi->escape_clock); ++ ++ if (dsi->port == 1) ++ vc4->dsi1 = NULL; ++} ++ ++static const struct component_ops vc4_dsi_ops = { ++ .bind = vc4_dsi_bind, ++ .unbind = vc4_dsi_unbind, ++}; ++ ++static int vc4_dsi_dev_probe(struct platform_device *pdev) ++{ ++ return component_add(&pdev->dev, &vc4_dsi_ops); ++} ++ ++static int vc4_dsi_dev_remove(struct platform_device *pdev) ++{ ++ component_del(&pdev->dev, &vc4_dsi_ops); ++ return 0; ++} ++ ++struct platform_driver vc4_dsi_driver = { ++ .probe = vc4_dsi_dev_probe, ++ .remove = vc4_dsi_dev_remove, ++ .driver = { ++ .name = "vc4_dsi", ++ .of_match_table = vc4_dsi_dt_match, ++ }, ++}; diff --git a/target/linux/brcm2708/patches-4.9/950-0176-BCM270X-Disable-VEC-unless-vc4-kms-v3d-is-present.patch b/target/linux/brcm2708/patches-4.9/950-0176-BCM270X-Disable-VEC-unless-vc4-kms-v3d-is-present.patch new file mode 100644 index 000000000000..42c39650e7af --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0176-BCM270X-Disable-VEC-unless-vc4-kms-v3d-is-present.patch @@ -0,0 +1,37 @@ +From 323d84f926d907f424c3e55bec55ec84a9d04657 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 23 Jan 2017 11:41:54 -0800 +Subject: [PATCH] BCM270X: Disable VEC unless vc4-kms-v3d is present. + +Signed-off-by: Eric Anholt +--- + arch/arm/boot/dts/bcm2708-rpi.dtsi | 4 ++++ + arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 7 +++++++ + 2 files changed, 11 insertions(+) + +--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi +@@ -107,3 +107,7 @@ + &usb { + power-domains = <&power RPI_POWER_DOMAIN_USB>; + }; ++ ++&vec { ++ status = "disabled"; ++}; +--- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts ++++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts +@@ -148,6 +148,13 @@ + }; + }; + ++ fragment@18 { ++ target = <&vec>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ + __overrides__ { + cma-256 = <0>,"+0-1-2-3-4"; + cma-192 = <0>,"-0+1-2-3-4"; diff --git a/target/linux/brcm2708/patches-4.9/950-0177-drm-vc4-Name-the-primary-and-cursor-planes-in-fkms.patch b/target/linux/brcm2708/patches-4.9/950-0177-drm-vc4-Name-the-primary-and-cursor-planes-in-fkms.patch new file mode 100644 index 000000000000..208ff58efb0c --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0177-drm-vc4-Name-the-primary-and-cursor-planes-in-fkms.patch @@ -0,0 +1,24 @@ +From 789e1599cc6589b2a5c05c0f0bcd57fdaeb1b474 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 1 Feb 2017 17:09:18 -0800 +Subject: [PATCH] drm/vc4: Name the primary and cursor planes in fkms. + +This makes debugging nicer, compared to trying to remember what the +IDs are. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -267,7 +267,7 @@ static struct drm_plane *vc4_fkms_plane_ + ret = drm_universal_plane_init(dev, plane, 0xff, + &vc4_plane_funcs, + primary ? &xrgb8888 : &argb8888, 1, +- type, NULL); ++ type, primary ? "primary" : "cursor"); + + if (type == DRM_PLANE_TYPE_PRIMARY) { + vc4_plane->fbinfo = diff --git a/target/linux/brcm2708/patches-4.9/950-0178-drm-vc4-Add-DRM_DEBUG_ATOMIC-for-the-insides-of-fkms.patch b/target/linux/brcm2708/patches-4.9/950-0178-drm-vc4-Add-DRM_DEBUG_ATOMIC-for-the-insides-of-fkms.patch new file mode 100644 index 000000000000..f3f141097bd1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0178-drm-vc4-Add-DRM_DEBUG_ATOMIC-for-the-insides-of-fkms.patch @@ -0,0 +1,69 @@ +From ac45ecdcbc38c6ec6b477980d0cd0760267f6057 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 1 Feb 2017 17:10:09 -0800 +Subject: [PATCH] drm/vc4: Add DRM_DEBUG_ATOMIC for the insides of fkms. + +Trying to debug weston on fkms involved figuring out what calls I was +making to the firmware. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 26 ++++++++++++++++++++++++++ + 1 file changed, 26 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -102,6 +102,11 @@ static int vc4_plane_set_primary_blank(s + struct vc4_dev *vc4 = to_vc4_dev(plane->dev); + + u32 packet = blank; ++ ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary plane %s", ++ plane->base.id, plane->name, ++ blank ? "blank" : "unblank"); ++ + return rpi_firmware_property(vc4->firmware, + RPI_FIRMWARE_FRAMEBUFFER_BLANK, + &packet, sizeof(packet)); +@@ -149,6 +154,16 @@ static void vc4_primary_plane_atomic_upd + WARN_ON_ONCE(vc4_plane->pitch != fb->pitches[0]); + } + ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] primary update %dx%d@%d +%d,%d 0x%08x/%d\n", ++ plane->base.id, plane->name, ++ state->crtc_w, ++ state->crtc_h, ++ bpp, ++ state->crtc_x, ++ state->crtc_y, ++ bo->paddr + fb->offsets[0], ++ fb->pitches[0]); ++ + ret = rpi_firmware_transaction(vc4->firmware, + RPI_FIRMWARE_CHAN_FB, + vc4_plane->fbinfo_bus_addr); +@@ -178,6 +193,15 @@ static void vc4_cursor_plane_atomic_upda + WARN_ON_ONCE(fb->pitches[0] != state->crtc_w * 4); + WARN_ON_ONCE(fb->bits_per_pixel != 32); + ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] update %dx%d cursor at %d,%d (0x%08x/%d)", ++ plane->base.id, plane->name, ++ state->crtc_w, ++ state->crtc_h, ++ state->crtc_x, ++ state->crtc_y, ++ bo->paddr + fb->offsets[0], ++ fb->pitches[0]); ++ + ret = rpi_firmware_property(vc4->firmware, + RPI_FIRMWARE_SET_CURSOR_STATE, + &packet_state, +@@ -200,6 +224,8 @@ static void vc4_cursor_plane_atomic_disa + u32 packet_state[] = { false, 0, 0, 0 }; + int ret; + ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] disabling cursor", plane->base.id, plane->name); ++ + ret = rpi_firmware_property(vc4->firmware, + RPI_FIRMWARE_SET_CURSOR_STATE, + &packet_state, diff --git a/target/linux/brcm2708/patches-4.9/950-0179-drm-vc4-Fix-sending-of-page-flip-completion-events-i.patch b/target/linux/brcm2708/patches-4.9/950-0179-drm-vc4-Fix-sending-of-page-flip-completion-events-i.patch new file mode 100644 index 000000000000..73fbf2bc9940 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0179-drm-vc4-Fix-sending-of-page-flip-completion-events-i.patch @@ -0,0 +1,42 @@ +From bc93583742c7ba9c84462664d4c798ba43bef26f Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 2 Feb 2017 09:42:18 -0800 +Subject: [PATCH] drm/vc4: Fix sending of page flip completion events in FKMS + mode. + +In the rewrite of vc4_crtc.c for fkms, I dropped the part of the +CRTC's atomic flush handler that moved the completion event from the +proposed atomic state change to the CRTC's current state. That meant +that when full screen pageflipping happened (glxgears -fullscreen in +X, compton, por weston), the app would end up blocked firever waiting +to draw its next frame. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -338,6 +338,21 @@ static int vc4_crtc_atomic_check(struct + static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, + struct drm_crtc_state *old_state) + { ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ struct drm_device *dev = crtc->dev; ++ ++ if (crtc->state->event) { ++ unsigned long flags; ++ ++ crtc->state->event->pipe = drm_crtc_index(crtc); ++ ++ WARN_ON(drm_crtc_vblank_get(crtc) != 0); ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ vc4_crtc->event = crtc->state->event; ++ crtc->state->event = NULL; ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++ } + } + + static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) diff --git a/target/linux/brcm2708/patches-4.9/950-0180-drm-vc4-Fulfill-user-BO-creation-requests-from-the-k.patch b/target/linux/brcm2708/patches-4.9/950-0180-drm-vc4-Fulfill-user-BO-creation-requests-from-the-k.patch new file mode 100644 index 000000000000..c0967b463932 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0180-drm-vc4-Fulfill-user-BO-creation-requests-from-the-k.patch @@ -0,0 +1,53 @@ +From cb8a5a1cf8cfd5b88fe641ada9a2dfb318d43c3f Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Wed, 8 Feb 2017 15:00:54 -0800 +Subject: [PATCH] drm/vc4: Fulfill user BO creation requests from the kernel BO + cache. + +The from_cache flag was actually "the BO is invisible to userspace", +so we can repurpose to just zero out a cached BO and return it to +userspace. + +Improves wall time for a loop of 5 glsl-algebraic-add-add-1 by +-1.44989% +/- 0.862891% (n=28, 1 outlier removed from each that +appeared to be other system noise) + +Note that there's an intel-gpu-tools test to check for the proper +zeroing behavior here, which we continue to pass. + +Signed-off-by: Eric Anholt +--- + drivers/gpu/drm/vc4/vc4_bo.c | 13 +++++++------ + 1 file changed, 7 insertions(+), 6 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_bo.c ++++ b/drivers/gpu/drm/vc4/vc4_bo.c +@@ -208,21 +208,22 @@ struct drm_gem_object *vc4_create_object + } + + struct vc4_bo *vc4_bo_create(struct drm_device *dev, size_t unaligned_size, +- bool from_cache) ++ bool allow_unzeroed) + { + size_t size = roundup(unaligned_size, PAGE_SIZE); + struct vc4_dev *vc4 = to_vc4_dev(dev); + struct drm_gem_cma_object *cma_obj; ++ struct vc4_bo *bo; + + if (size == 0) + return ERR_PTR(-EINVAL); + + /* First, try to get a vc4_bo from the kernel BO cache. */ +- if (from_cache) { +- struct vc4_bo *bo = vc4_bo_get_from_cache(dev, size); +- +- if (bo) +- return bo; ++ bo = vc4_bo_get_from_cache(dev, size); ++ if (bo) { ++ if (!allow_unzeroed) ++ memset(bo->base.vaddr, 0, bo->base.base.size); ++ return bo; + } + + cma_obj = drm_gem_cma_create(dev, size); diff --git a/target/linux/brcm2708/patches-4.9/950-0181-drm-vc4-Fix-OOPSes-from-trying-to-cache-a-partially-.patch b/target/linux/brcm2708/patches-4.9/950-0181-drm-vc4-Fix-OOPSes-from-trying-to-cache-a-partially-.patch new file mode 100644 index 000000000000..000f3a8df374 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0181-drm-vc4-Fix-OOPSes-from-trying-to-cache-a-partially-.patch @@ -0,0 +1,34 @@ +From 3f131f18e76bb3fa56158adea3abddeaac68e860 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Thu, 9 Feb 2017 09:23:34 -0800 +Subject: [PATCH] drm/vc4: Fix OOPSes from trying to cache a partially + constructed BO. + +If a CMA allocation failed, the partially constructed BO would be +unreferenced through the normal path, and we might choose to put it in +the BO cache. If we then reused it before it expired from the cache, +the kernel would OOPS. + +Signed-off-by: Eric Anholt +Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.") +--- + drivers/gpu/drm/vc4/vc4_bo.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_bo.c ++++ b/drivers/gpu/drm/vc4/vc4_bo.c +@@ -314,6 +314,14 @@ void vc4_free_object(struct drm_gem_obje + goto out; + } + ++ /* If this object was partially constructed but CMA allocation ++ * had failed, just free it. ++ */ ++ if (!bo->base.vaddr) { ++ vc4_bo_destroy(bo); ++ goto out; ++ } ++ + cache_list = vc4_get_cache_list_for_size(dev, gem_bo->size); + if (!cache_list) { + vc4_bo_destroy(bo); diff --git a/target/linux/brcm2708/patches-4.9/950-0182-drm-vc4-Verify-at-boot-that-CMA-doesn-t-cross-a-256M.patch b/target/linux/brcm2708/patches-4.9/950-0182-drm-vc4-Verify-at-boot-that-CMA-doesn-t-cross-a-256M.patch new file mode 100644 index 000000000000..453d027ae96a --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0182-drm-vc4-Verify-at-boot-that-CMA-doesn-t-cross-a-256M.patch @@ -0,0 +1,79 @@ +From b280acf3c32746106c81419390f5b1869d644f66 Mon Sep 17 00:00:00 2001 +From: Eric Anholt +Date: Mon, 12 Oct 2015 08:58:08 -0700 +Subject: [PATCH] drm/vc4: Verify at boot that CMA doesn't cross a 256MB + boundary. + +I've seen lots of users cranking CMA up higher, so throw an error if +they do. + +Signed-off-by: Eric Anholt +--- + drivers/base/dma-contiguous.c | 1 + + drivers/gpu/drm/vc4/vc4_v3d.c | 18 ++++++++++++++++++ + mm/cma.c | 2 ++ + 3 files changed, 21 insertions(+) + +--- a/drivers/base/dma-contiguous.c ++++ b/drivers/base/dma-contiguous.c +@@ -35,6 +35,7 @@ + #endif + + struct cma *dma_contiguous_default_area; ++EXPORT_SYMBOL(dma_contiguous_default_area); + + /* + * Default global CMA area size can be defined in kernel's .config. +--- a/drivers/gpu/drm/vc4/vc4_v3d.c ++++ b/drivers/gpu/drm/vc4/vc4_v3d.c +@@ -16,7 +16,10 @@ + * this program. If not, see . + */ + ++#include "linux/init.h" ++#include "linux/cma.h" + #include "linux/component.h" ++#include "linux/dma-contiguous.h" + #include "linux/pm_runtime.h" + #include "vc4_drv.h" + #include "vc4_regs.h" +@@ -185,8 +188,23 @@ static int vc4_v3d_bind(struct device *d + struct drm_device *drm = dev_get_drvdata(master); + struct vc4_dev *vc4 = to_vc4_dev(drm); + struct vc4_v3d *v3d = NULL; ++ struct cma *cma; + int ret; + ++ cma = dev_get_cma_area(dev); ++ if (!cma) ++ return -EINVAL; ++ ++ if ((cma_get_base(cma) & 0xf0000000) != ++ ((cma_get_base(cma) + cma_get_size(cma) - 1) & 0xf0000000)) { ++ DRM_ERROR("V3D requires that the CMA area (0x%08lx - 0x%08lx) " ++ "not span a 256MB boundary, or memory corruption " ++ "would happen.\n", ++ (long)cma_get_base(cma), ++ cma_get_base(cma) + cma_get_size(cma)); ++ return -EINVAL; ++ } ++ + v3d = devm_kzalloc(&pdev->dev, sizeof(*v3d), GFP_KERNEL); + if (!v3d) + return -ENOMEM; +--- a/mm/cma.c ++++ b/mm/cma.c +@@ -47,11 +47,13 @@ phys_addr_t cma_get_base(const struct cm + { + return PFN_PHYS(cma->base_pfn); + } ++EXPORT_SYMBOL(cma_get_base); + + unsigned long cma_get_size(const struct cma *cma) + { + return cma->count << PAGE_SHIFT; + } ++EXPORT_SYMBOL(cma_get_size); + + static unsigned long cma_bitmap_aligned_mask(const struct cma *cma, + int align_order) diff --git a/target/linux/brcm2708/patches-4.9/950-0183-BCM270X_DT-Add-SMSC-ethernet-controller-to-DT.patch b/target/linux/brcm2708/patches-4.9/950-0183-BCM270X_DT-Add-SMSC-ethernet-controller-to-DT.patch new file mode 100644 index 000000000000..76b1bf3bbfb6 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0183-BCM270X_DT-Add-SMSC-ethernet-controller-to-DT.patch @@ -0,0 +1,57 @@ +From 35a2c1524b21318228f0566d9a4ac53bf3138bdc Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 17 Feb 2017 09:47:11 +0000 +Subject: [PATCH] BCM270X_DT: Add SMSC ethernet controller to DT + +With an ethernet node in the DT, a suitable firmware can populate the +local-mac-address property, removing the need for a downstream patch +to the driver to read its MAC address from a module parameter. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 1 + + arch/arm/boot/dts/bcm2708-rpi-b.dts | 1 + + arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 1 + + arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 1 + + 4 files changed, 4 insertions(+) + +--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts +@@ -1,6 +1,7 @@ + /dts-v1/; + + #include "bcm2708.dtsi" ++#include "bcm283x-rpi-smsc9514.dtsi" + + / { + model = "Raspberry Pi Model B+"; +--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts ++++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts +@@ -1,6 +1,7 @@ + /dts-v1/; + + #include "bcm2708.dtsi" ++#include "bcm283x-rpi-smsc9512.dtsi" + + / { + model = "Raspberry Pi Model B"; +--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts ++++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts +@@ -1,6 +1,7 @@ + /dts-v1/; + + #include "bcm2709.dtsi" ++#include "bcm283x-rpi-smsc9514.dtsi" + + / { + model = "Raspberry Pi 2 Model B"; +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -5,6 +5,7 @@ + #endif + + #include "bcm2710.dtsi" ++#include "bcm283x-rpi-smsc9514.dtsi" + + / { + model = "Raspberry Pi 3 Model B"; diff --git a/target/linux/brcm2708/patches-4.9/950-0185-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch b/target/linux/brcm2708/patches-4.9/950-0185-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch new file mode 100644 index 000000000000..13f6c11f592c --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0185-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch @@ -0,0 +1,28 @@ +From a2ca8b47db0d08735e1c0ebeaf34e88522091662 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 13 Feb 2017 17:20:08 +0000 +Subject: [PATCH] clk-bcm2835: Mark used PLLs and dividers CRITICAL + +The VPU configures and relies on several PLLs and dividers. Mark all +enabled dividers and their PLLs as CRITICAL to prevent the kernel from +switching them off. + +Signed-off-by: Phil Elwell +--- + drivers/clk/bcm/clk-bcm2835.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1366,6 +1366,11 @@ bcm2835_register_pll_divider(struct bcm2 + divider->div.hw.init = &init; + divider->div.table = NULL; + ++ if (!(cprman_read(cprman, data->cm_reg) & data->hold_mask)) { ++ init.flags |= CLK_IS_CRITICAL; ++ divider->div.flags |= CLK_IS_CRITICAL; ++ } ++ + divider->cprman = cprman; + divider->data = data; + diff --git a/target/linux/brcm2708/patches-4.9/950-0186-clk-bcm2835-Add-claim-clocks-property.patch b/target/linux/brcm2708/patches-4.9/950-0186-clk-bcm2835-Add-claim-clocks-property.patch new file mode 100644 index 000000000000..09dcfa7a6824 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0186-clk-bcm2835-Add-claim-clocks-property.patch @@ -0,0 +1,133 @@ +From 5c1128ebe6c7a4af3f1784a640df7f3698233e9d Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Mon, 13 Feb 2017 17:20:08 +0000 +Subject: [PATCH] clk-bcm2835: Add claim-clocks property + +The claim-clocks property can be used to prevent PLLs and dividers +from being marked as critical. It contains a vector of clock IDs, +as defined by dt-bindings/clock/bcm2835.h. + +Use this mechanism to claim PLLD_DSI0, PLLD_DSI1, PLLH_AUX and +PLLH_PIX for the vc4_kms_v3d driver. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 14 +++++++++ + drivers/clk/bcm/clk-bcm2835.c | 34 ++++++++++++++++++++-- + 2 files changed, 46 insertions(+), 2 deletions(-) + +--- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts ++++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts +@@ -5,6 +5,8 @@ + /dts-v1/; + /plugin/; + ++#include ++ + / { + compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; + +@@ -155,6 +157,18 @@ + }; + }; + ++ fragment@19 { ++ target = <&clocks>; ++ __overlay__ { ++ claim-clocks = < ++ BCM2835_PLLD_DSI0 ++ BCM2835_PLLD_DSI1 ++ BCM2835_PLLH_AUX ++ BCM2835_PLLH_PIX ++ >; ++ }; ++ }; ++ + __overrides__ { + cma-256 = <0>,"+0-1-2-3-4"; + cma-192 = <0>,"-0+1-2-3-4"; +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -1298,6 +1298,8 @@ static const struct clk_ops bcm2835_vpu_ + .debug_init = bcm2835_clock_debug_init, + }; + ++static bool bcm2835_clk_is_claimed(const char *name); ++ + static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman, + const struct bcm2835_pll_data *data) + { +@@ -1314,6 +1316,9 @@ static struct clk_hw *bcm2835_register_p + init.ops = &bcm2835_pll_clk_ops; + init.flags = CLK_IGNORE_UNUSED; + ++ if (!bcm2835_clk_is_claimed(data->name)) ++ init.flags |= CLK_IS_CRITICAL; ++ + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) + return NULL; +@@ -1367,8 +1372,10 @@ bcm2835_register_pll_divider(struct bcm2 + divider->div.table = NULL; + + if (!(cprman_read(cprman, data->cm_reg) & data->hold_mask)) { +- init.flags |= CLK_IS_CRITICAL; +- divider->div.flags |= CLK_IS_CRITICAL; ++ if (!bcm2835_clk_is_claimed(data->source_pll)) ++ init.flags |= CLK_IS_CRITICAL; ++ if (!bcm2835_clk_is_claimed(data->name)) ++ divider->div.flags |= CLK_IS_CRITICAL; + } + + divider->cprman = cprman; +@@ -2104,6 +2111,8 @@ static const struct bcm2835_clk_desc clk + .ctl_reg = CM_PERIICTL), + }; + ++static bool bcm2835_clk_claimed[ARRAY_SIZE(clk_desc_array)]; ++ + /* + * Permanently take a reference on the parent of the SDRAM clock. + * +@@ -2123,6 +2132,19 @@ static int bcm2835_mark_sdc_parent_criti + return clk_prepare_enable(parent); + } + ++static bool bcm2835_clk_is_claimed(const char *name) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(clk_desc_array); i++) { ++ const char *clk_name = *(const char **)(clk_desc_array[i].data); ++ if (!strcmp(name, clk_name)) ++ return bcm2835_clk_claimed[i]; ++ } ++ ++ return false; ++} ++ + static int bcm2835_clk_probe(struct platform_device *pdev) + { + struct device *dev = &pdev->dev; +@@ -2132,6 +2154,7 @@ static int bcm2835_clk_probe(struct plat + const struct bcm2835_clk_desc *desc; + const size_t asize = ARRAY_SIZE(clk_desc_array); + size_t i; ++ u32 clk_id; + int ret; + + cprman = devm_kzalloc(dev, sizeof(*cprman) + +@@ -2147,6 +2170,13 @@ static int bcm2835_clk_probe(struct plat + if (IS_ERR(cprman->regs)) + return PTR_ERR(cprman->regs); + ++ memset(bcm2835_clk_claimed, 0, sizeof(bcm2835_clk_claimed)); ++ for (i = 0; ++ !of_property_read_u32_index(pdev->dev.of_node, "claim-clocks", ++ i, &clk_id); ++ i++) ++ bcm2835_clk_claimed[clk_id]= true; ++ + memcpy(cprman->real_parent_names, cprman_parent_names, + sizeof(cprman_parent_names)); + of_clk_parent_fill(dev->of_node, cprman->real_parent_names, diff --git a/target/linux/brcm2708/patches-4.9/950-0187-dmaengine-bcm2835-Fix-cyclic-DMA-period-splitting.patch b/target/linux/brcm2708/patches-4.9/950-0187-dmaengine-bcm2835-Fix-cyclic-DMA-period-splitting.patch new file mode 100644 index 000000000000..fa0d998a2d93 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0187-dmaengine-bcm2835-Fix-cyclic-DMA-period-splitting.patch @@ -0,0 +1,39 @@ +From 9fd7a158ec098ab05b8d3ec2c2973b3dc7e498f3 Mon Sep 17 00:00:00 2001 +From: Matthias Reichl +Date: Mon, 20 Feb 2017 20:01:16 +0100 +Subject: [PATCH] dmaengine: bcm2835: Fix cyclic DMA period splitting + +The code responsible for splitting periods into chunks that +can be handled by the DMA controller missed to update total_len, +the number of bytes processed in the current period, when there +are more chunks to follow. + +Therefore total_len was stuck at 0 and the code didn't work at all. +This resulted in a wrong control block layout and audio issues because +the cyclic DMA callback wasn't executing on period boundaries. + +Fix this by adding the missing total_len update. + +Signed-off-by: Matthias Reichl +Signed-off-by: Martin Sperl +Tested-by: Clive Messer +Reviewed-by: Eric Anholt +--- + drivers/dma/bcm2835-dma.c | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +--- a/drivers/dma/bcm2835-dma.c ++++ b/drivers/dma/bcm2835-dma.c +@@ -253,8 +253,11 @@ static void bcm2835_dma_create_cb_set_le + */ + + /* have we filled in period_length yet? */ +- if (*total_len + control_block->length < period_len) ++ if (*total_len + control_block->length < period_len) { ++ /* update number of bytes in this period so far */ ++ *total_len += control_block->length; + return; ++ } + + /* calculate the length that remains to reach period_length */ + control_block->length = period_len - *total_len; diff --git a/target/linux/brcm2708/patches-4.9/950-0188-Add-ads1015-driver-to-config.patch b/target/linux/brcm2708/patches-4.9/950-0188-Add-ads1015-driver-to-config.patch new file mode 100644 index 000000000000..1303bdc101d7 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0188-Add-ads1015-driver-to-config.patch @@ -0,0 +1,52 @@ +From 9e638878dd33652b34e51746d369afba6103d77e Mon Sep 17 00:00:00 2001 +From: Scott Ellis +Date: Thu, 23 Feb 2017 11:56:20 -0500 +Subject: [PATCH] Add ads1015 driver to config + +--- + arch/arm/configs/bcm2709_defconfig | 3 ++- + arch/arm/configs/bcmrpi_defconfig | 3 ++- + 2 files changed, 4 insertions(+), 2 deletions(-) + +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -653,6 +653,7 @@ CONFIG_HWMON=m + CONFIG_SENSORS_LM75=m + CONFIG_SENSORS_SHT21=m + CONFIG_SENSORS_SHTC1=m ++CONFIG_SENSORS_ADS1015=m + CONFIG_SENSORS_INA2XX=m + CONFIG_THERMAL=y + CONFIG_THERMAL_BCM2835=y +@@ -833,9 +834,9 @@ CONFIG_VIDEO_OV7640=m + CONFIG_VIDEO_MT9V011=m + CONFIG_DRM=m + CONFIG_DRM_LOAD_EDID_FIRMWARE=y ++CONFIG_DRM_UDL=m + CONFIG_DRM_PANEL_SIMPLE=m + CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m +-CONFIG_DRM_UDL=m + CONFIG_DRM_VC4=m + CONFIG_FB=y + CONFIG_FB_BCM2708=y +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -647,6 +647,7 @@ CONFIG_HWMON=m + CONFIG_SENSORS_LM75=m + CONFIG_SENSORS_SHT21=m + CONFIG_SENSORS_SHTC1=m ++CONFIG_SENSORS_ADS1015=m + CONFIG_SENSORS_INA2XX=m + CONFIG_THERMAL=y + CONFIG_THERMAL_BCM2835=y +@@ -827,9 +828,9 @@ CONFIG_VIDEO_OV7640=m + CONFIG_VIDEO_MT9V011=m + CONFIG_DRM=m + CONFIG_DRM_LOAD_EDID_FIRMWARE=y ++CONFIG_DRM_UDL=m + CONFIG_DRM_PANEL_SIMPLE=m + CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m +-CONFIG_DRM_UDL=m + CONFIG_DRM_VC4=m + CONFIG_FB=y + CONFIG_FB_BCM2708=y diff --git a/target/linux/brcm2708/patches-4.9/950-0189-config-add-slcan-kernel-module.patch b/target/linux/brcm2708/patches-4.9/950-0189-config-add-slcan-kernel-module.patch new file mode 100644 index 000000000000..021eb014c8b4 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0189-config-add-slcan-kernel-module.patch @@ -0,0 +1,31 @@ +From 2fd423706eb3afde2a36845488e18d194b18b0c6 Mon Sep 17 00:00:00 2001 +From: popcornmix +Date: Fri, 27 Jan 2017 18:49:30 +0000 +Subject: [PATCH] config: add slcan kernel module + +See: https://github.com/raspberrypi/linux/issues/1819 +--- + arch/arm/configs/bcm2709_defconfig | 1 + + arch/arm/configs/bcmrpi_defconfig | 1 + + 2 files changed, 2 insertions(+) + +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -361,6 +361,7 @@ CONFIG_BAYCOM_SER_HDX=m + CONFIG_YAM=m + CONFIG_CAN=m + CONFIG_CAN_VCAN=m ++CONFIG_CAN_SLCAN=m + CONFIG_CAN_MCP251X=m + CONFIG_IRDA=m + CONFIG_IRLAN=m +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -357,6 +357,7 @@ CONFIG_BAYCOM_SER_HDX=m + CONFIG_YAM=m + CONFIG_CAN=m + CONFIG_CAN_VCAN=m ++CONFIG_CAN_SLCAN=m + CONFIG_CAN_MCP251X=m + CONFIG_IRDA=m + CONFIG_IRLAN=m diff --git a/target/linux/brcm2708/patches-4.9/950-0190-sound-Support-for-Dion-Audio-LOCO-V2-DAC-AMP-HAT.patch b/target/linux/brcm2708/patches-4.9/950-0190-sound-Support-for-Dion-Audio-LOCO-V2-DAC-AMP-HAT.patch new file mode 100644 index 000000000000..eb6422a469c1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0190-sound-Support-for-Dion-Audio-LOCO-V2-DAC-AMP-HAT.patch @@ -0,0 +1,251 @@ +From a20dbe4972ea3df27f24c5397102e1346462a4f4 Mon Sep 17 00:00:00 2001 +From: Miquel +Date: Fri, 24 Feb 2017 20:51:06 +0100 +Subject: [PATCH] sound: Support for Dion Audio LOCO-V2 DAC-AMP HAT + +Signed-off-by: Miquel Blauw +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 19 +++++ + arch/arm/configs/bcm2709_defconfig | 1 + + arch/arm/configs/bcmrpi_defconfig | 1 + + sound/soc/bcm/Kconfig | 7 ++ + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/dionaudio_loco-v2.c | 140 ++++++++++++++++++++++++++++++++++++ + 7 files changed, 171 insertions(+) + create mode 100644 sound/soc/bcm/dionaudio_loco-v2.c + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -13,6 +13,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + bmp085_i2c-sensor.dtbo \ + dht11.dtbo \ + dionaudio-loco.dtbo \ ++ dionaudio-loco-v2.dtbo \ + dpi18.dtbo \ + dpi24.dtbo \ + dwc-otg.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -308,6 +308,25 @@ Load: dtoverlay=dionaudio-loco + Params: + + ++Name: dionaudio-loco-v2 ++Info: Configures the Dion Audio LOCO-V2 DAC-AMP ++Load: dtoverlay=dionaudio-loco-v2,= ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ "dtoverlay=hifiberry-dacplus,24db_digital_gain" ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24dB_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ ++ + Name: dpi18 + Info: Overlay for a generic 18-bit DPI display + This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -889,6 +889,7 @@ CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m + CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m + CONFIG_SND_DIGIDAC1_SOUNDCARD=m + CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m ++CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m + CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m + CONFIG_SND_PISOUND=m + CONFIG_SND_SOC_ADAU1701=m +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -883,6 +883,7 @@ CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m + CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m + CONFIG_SND_DIGIDAC1_SOUNDCARD=m + CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m ++CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m + CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m + CONFIG_SND_PISOUND=m + CONFIG_SND_SOC_ADAU1701=m +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -133,6 +133,13 @@ config SND_BCM2708_SOC_DIONAUDIO_LOCO + help + Say Y or M if you want to add support for Dion Audio LOCO. + ++config SND_BCM2708_SOC_DIONAUDIO_LOCO_V2 ++ tristate "Support for Dion Audio LOCO-V2 DAC-AMP" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM5122 ++ help ++ Say Y or M if you want to add support for Dion Audio LOCO-V2. ++ + config SND_BCM2708_SOC_ALLO_PIANO_DAC + tristate "Support for Allo Piano DAC" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -25,6 +25,7 @@ snd-soc-raspidac3-objs := raspidac3.o + snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o + snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o + snd-soc-dionaudio-loco-objs := dionaudio_loco.o ++snd-soc-dionaudio-loco-v2-objs := dionaudio_loco-v2.o + snd-soc-allo-piano-dac-objs := allo-piano-dac.o + snd-soc-pisound-objs := pisound.o + +@@ -44,5 +45,6 @@ obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) + obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o + obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o + obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o ++obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2) += snd-soc-dionaudio-loco-v2.o + obj-$(CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC) += snd-soc-allo-piano-dac.o + obj-$(CONFIG_SND_PISOUND) += snd-soc-pisound.o +--- /dev/null ++++ b/sound/soc/bcm/dionaudio_loco-v2.c +@@ -0,0 +1,140 @@ ++/* ++ * ASoC Driver for Dion Audio LOCO-V2 DAC-AMP ++ * ++ * Author: Miquel Blauw ++ * Copyright 2017 ++ * ++ * Based on the software of the RPi-DAC writen by Florian Meier ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++static bool digital_gain_0db_limit = true; ++ ++static int snd_rpi_dionaudio_loco_v2_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ if (digital_gain_0db_limit) { ++ int ret; ++ struct snd_soc_card *card = rtd->card; ++ ++ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207); ++ if (ret < 0) ++ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); ++ } ++ ++ return 0; ++} ++ ++static int snd_rpi_dionaudio_loco_v2_hw_params( ++ struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ unsigned int sample_bits = ++ snd_pcm_format_physical_width(params_format(params)); ++ ++ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_dionaudio_loco_v2_ops = { ++ .hw_params = snd_rpi_dionaudio_loco_v2_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_dionaudio_loco_v2_dai[] = { ++{ ++ .name = "DionAudio LOCO-V2", ++ .stream_name = "DionAudio LOCO-V2 DAC-AMP", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm512x-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm512x.1-004d", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_dionaudio_loco_v2_ops, ++ .init = snd_rpi_dionaudio_loco_v2_init, ++},}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_dionaudio_loco_v2 = { ++ .name = "Dion Audio LOCO-V2", ++ .dai_link = snd_rpi_dionaudio_loco_v2_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_dionaudio_loco_v2_dai), ++}; ++ ++static int snd_rpi_dionaudio_loco_v2_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ ++ snd_rpi_dionaudio_loco_v2.dev = &pdev->dev; ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = ++ &snd_rpi_dionaudio_loco_v2_dai[0]; ++ ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } ++ ++ digital_gain_0db_limit = !of_property_read_bool( ++ pdev->dev.of_node, "dionaudio,24db_digital_gain"); ++ } ++ ++ ret = snd_soc_register_card(&snd_rpi_dionaudio_loco_v2); ++ if (ret) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ++ ret); ++ ++ return ret; ++} ++ ++static int snd_rpi_dionaudio_loco_v2_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&snd_rpi_dionaudio_loco_v2); ++} ++ ++static const struct of_device_id dionaudio_of_match[] = { ++ { .compatible = "dionaudio,dionaudio-loco-v2", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, dionaudio_of_match); ++ ++static struct platform_driver snd_rpi_dionaudio_loco_v2_driver = { ++ .driver = { ++ .name = "snd-rpi-dionaudio-loco-v2", ++ .owner = THIS_MODULE, ++ .of_match_table = dionaudio_of_match, ++ }, ++ .probe = snd_rpi_dionaudio_loco_v2_probe, ++ .remove = snd_rpi_dionaudio_loco_v2_remove, ++}; ++ ++module_platform_driver(snd_rpi_dionaudio_loco_v2_driver); ++ ++MODULE_AUTHOR("Miquel Blauw "); ++MODULE_DESCRIPTION("ASoC Driver for DionAudio LOCO-V2"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/950-0191-SQUASH-Add-LOCO-V2-overlay-from-last-commit.patch b/target/linux/brcm2708/patches-4.9/950-0191-SQUASH-Add-LOCO-V2-overlay-from-last-commit.patch new file mode 100644 index 000000000000..be3618a0bf2f --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0191-SQUASH-Add-LOCO-V2-overlay-from-last-commit.patch @@ -0,0 +1,62 @@ +From e3b5ca5cb69c36f41436ab8be96710e39442ce28 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Sun, 26 Feb 2017 01:13:02 +0000 +Subject: [PATCH] SQUASH: Add LOCO-V2 overlay from last commit + +--- + .../dts/overlays/dionaudio-loco-v2-overlay.dts | 49 ++++++++++++++++++++++ + 1 file changed, 49 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts + +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts +@@ -0,0 +1,49 @@ ++/* ++ * Definitions for Dion Audio LOCO-V2 DAC-AMP ++ * eg. dtoverlay=dionaudio-loco-v2 ++ * ++ * PCM5242 DAC (in software mode) and TPA3255 AMP. ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&sound>; ++ frag0: __overlay__ { ++ compatible = "dionaudio,dionaudio-loco-v2"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm5122@4c { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm5122"; ++ reg = <0x4d>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ 24db_digital_gain = <&frag0>,"dionaudio,24db_digital_gain?"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.9/950-0192-Add-support-for-Fe-Pi-audio-sound-card.-1867.patch b/target/linux/brcm2708/patches-4.9/950-0192-Add-support-for-Fe-Pi-audio-sound-card.-1867.patch new file mode 100644 index 000000000000..262dc14bce3e --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0192-Add-support-for-Fe-Pi-audio-sound-card.-1867.patch @@ -0,0 +1,333 @@ +From c646d023c75607a9ebc7296fe424d6eb4e804164 Mon Sep 17 00:00:00 2001 +From: Fe-Pi +Date: Wed, 1 Mar 2017 04:42:43 -0700 +Subject: [PATCH] Add support for Fe-Pi audio sound card. (#1867) + +Fe-Pi Audio Sound Card is based on NXP SGTL5000 codec. +Mechanical specification of the board is the same the Raspberry Pi Zero. +3.5mm jacks for Headphone/Mic, Line In, and Line Out. + +Signed-off-by: Henry Kupis +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 6 + + arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts | 70 +++++++++ + arch/arm/configs/bcm2709_defconfig | 1 + + arch/arm/configs/bcmrpi_defconfig | 1 + + sound/soc/bcm/Kconfig | 7 + + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/fe-pi-audio.c | 158 +++++++++++++++++++++ + 8 files changed, 246 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts + create mode 100644 sound/soc/bcm/fe-pi-audio.c + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -20,6 +20,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + dwc2.dtbo \ + enc28j60.dtbo \ + enc28j60-spi2.dtbo \ ++ fe-pi-audio.dtbo \ + gpio-ir.dtbo \ + gpio-poweroff.dtbo \ + hifiberry-amp.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -383,6 +383,12 @@ Params: int_pin GPIO use + speed SPI bus speed (default 12000000) + + ++Name: fe-pi-audio ++Info: Configures the Fe-Pi Audio Sound Card ++Load: dtoverlay=fe-pi-audio ++Params: ++ ++ + Name: gpio-ir + Info: Use GPIO pin as rc-core style infrared receiver input. The rc-core- + based gpio_ir_recv driver maps received keys directly to a +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts +@@ -0,0 +1,70 @@ ++// Definitions for Fe-Pi Audio ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&clocks>; ++ __overlay__ { ++ sgtl5000_mclk: sgtl5000_mclk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <12288000>; ++ clock-output-names = "sgtl5000-mclk"; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&soc>; ++ __overlay__ { ++ reg_1v8: reg_1v8@0 { ++ compatible = "regulator-fixed"; ++ regulator-name = "1V8"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-always-on; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ sgtl5000@0a { ++ #sound-dai-cells = <0>; ++ compatible = "fepi,sgtl5000"; ++ reg = <0x0a>; ++ clocks = <&sgtl5000_mclk>; ++ micbias-resistor-k-ohms = <2>; ++ micbias-voltage-m-volts = <3000>; ++ VDDA-supply = <&vdd_3v3_reg>; ++ VDDIO-supply = <&vdd_3v3_reg>; ++ VDDD-supply = <®_1v8>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "fe-pi,fe-pi-audio"; ++ i2s-controller = <&i2s>; ++ status = "okay"; ++ }; ++ }; ++}; +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -891,6 +891,7 @@ CONFIG_SND_DIGIDAC1_SOUNDCARD=m + CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m + CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m + CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m ++CONFIG_SND_BCM2708_SOC_FE_PI_AUDIO=m + CONFIG_SND_PISOUND=m + CONFIG_SND_SOC_ADAU1701=m + CONFIG_SND_SOC_ADAU7002=m +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -885,6 +885,7 @@ CONFIG_SND_DIGIDAC1_SOUNDCARD=m + CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m + CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m + CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m ++CONFIG_SND_BCM2708_SOC_FE_PI_AUDIO=m + CONFIG_SND_PISOUND=m + CONFIG_SND_SOC_ADAU1701=m + CONFIG_SND_SOC_ADAU7002=m +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -147,6 +147,13 @@ config SND_BCM2708_SOC_ALLO_PIANO_DAC + help + Say Y or M if you want to add support for Allo Piano DAC. + ++config SND_BCM2708_SOC_FE_PI_AUDIO ++ tristate "Support for Fe-Pi-Audio" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_SGTL5000 ++ help ++ Say Y or M if you want to add support for Fe-Pi-Audio. ++ + config SND_PISOUND + tristate "Support for Blokas Labs pisound" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -28,6 +28,7 @@ snd-soc-dionaudio-loco-objs := dionaudio + snd-soc-dionaudio-loco-v2-objs := dionaudio_loco-v2.o + snd-soc-allo-piano-dac-objs := allo-piano-dac.o + snd-soc-pisound-objs := pisound.o ++snd-soc-fe-pi-audio-objs := fe-pi-audio.o + + obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o +@@ -48,3 +49,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_L + obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2) += snd-soc-dionaudio-loco-v2.o + obj-$(CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC) += snd-soc-allo-piano-dac.o + obj-$(CONFIG_SND_PISOUND) += snd-soc-pisound.o ++obj-$(CONFIG_SND_BCM2708_SOC_FE_PI_AUDIO) += snd-soc-fe-pi-audio.o +--- /dev/null ++++ b/sound/soc/bcm/fe-pi-audio.c +@@ -0,0 +1,158 @@ ++/* ++ * ASoC Driver for Fe-Pi Audio Sound Card ++ * ++ * Author: Henry Kupis ++ * Copyright 2016 ++ * based on code by Florian Meier ++ * based on code by Shawn Guo ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/sgtl5000.h" ++ ++static int snd_fe_pi_audio_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_card *card = rtd->card; ++ struct snd_soc_codec *codec = rtd->codec; ++ ++ snd_soc_dapm_force_enable_pin(&card->dapm, "LO"); ++ snd_soc_dapm_force_enable_pin(&card->dapm, "ADC"); ++ snd_soc_dapm_force_enable_pin(&card->dapm, "DAC"); ++ snd_soc_dapm_force_enable_pin(&card->dapm, "HP"); ++ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, ++ SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP); ++ ++ return 0; ++} ++ ++static int snd_fe_pi_audio_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct device *dev = rtd->card->dev; ++ struct snd_soc_dai *codec_dai = rtd->codec_dai; ++ ++ int ret; ++ ++ /* Set SGTL5000's SYSCLK */ ++ ret = snd_soc_dai_set_sysclk(codec_dai, SGTL5000_SYSCLK, 12288000, SND_SOC_CLOCK_IN); ++ if (ret) { ++ dev_err(dev, "could not set codec driver clock params\n"); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++ ++static struct snd_soc_ops snd_fe_pi_audio_ops = { ++ .hw_params = snd_fe_pi_audio_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_fe_pi_audio_dai[] = { ++ { ++ .name = "FE-PI", ++ .stream_name = "Fe-Pi HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "sgtl5000", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "sgtl5000.1-000a", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM, ++ .ops = &snd_fe_pi_audio_ops, ++ .init = snd_fe_pi_audio_init, ++ }, ++}; ++ ++static const struct snd_soc_dapm_route fe_pi_audio_dapm_routes[] = { ++ {"ADC", NULL, "Mic Bias"}, ++}; ++ ++ ++static struct snd_soc_card fe_pi_audio = { ++ .name = "Fe-Pi Audio", ++ .owner = THIS_MODULE, ++ .dai_link = snd_fe_pi_audio_dai, ++ .num_links = ARRAY_SIZE(snd_fe_pi_audio_dai), ++ ++ .dapm_routes = fe_pi_audio_dapm_routes, ++ .num_dapm_routes = ARRAY_SIZE(fe_pi_audio_dapm_routes), ++}; ++ ++static int snd_fe_pi_audio_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ struct snd_soc_card *card = &fe_pi_audio; ++ struct device_node *np = pdev->dev.of_node; ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai = &snd_fe_pi_audio_dai[0]; ++ ++ fe_pi_audio.dev = &pdev->dev; ++ ++ i2s_node = of_parse_phandle(np, "i2s-controller", 0); ++ if (!i2s_node) { ++ dev_err(&pdev->dev, "i2s_node phandle missing or invalid\n"); ++ return -EINVAL; ++ } ++ ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ ++ of_node_put(i2s_node); ++ ++ card->dev = &pdev->dev; ++ platform_set_drvdata(pdev, card); ++ ++ ret = snd_soc_register_card(card); ++ if (ret && ret != -EPROBE_DEFER) ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int snd_fe_pi_audio_remove(struct platform_device *pdev) ++{ ++ return snd_soc_unregister_card(&fe_pi_audio); ++} ++ ++static const struct of_device_id snd_fe_pi_audio_of_match[] = { ++ { .compatible = "fe-pi,fe-pi-audio", }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, snd_fe_pi_audio_of_match); ++ ++static struct platform_driver snd_fe_pi_audio_driver = { ++ .driver = { ++ .name = "snd-fe-pi-audio", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_fe_pi_audio_of_match, ++ }, ++ .probe = snd_fe_pi_audio_probe, ++ .remove = snd_fe_pi_audio_remove, ++}; ++ ++module_platform_driver(snd_fe_pi_audio_driver); ++ ++MODULE_AUTHOR("Henry Kupis "); ++MODULE_DESCRIPTION("ASoC Driver for Fe-Pi Audio"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/brcm2708/patches-4.9/950-0193-Add-overlay-for-ads1115-ADCs-1864.patch b/target/linux/brcm2708/patches-4.9/950-0193-Add-overlay-for-ads1115-ADCs-1864.patch new file mode 100644 index 000000000000..39d48e60b3aa --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0193-Add-overlay-for-ads1115-ADCs-1864.patch @@ -0,0 +1,159 @@ +From 6d5e32067cf3f3169ec15097c175878de365d247 Mon Sep 17 00:00:00 2001 +From: Scott Ellis +Date: Wed, 1 Mar 2017 07:22:24 -0500 +Subject: [PATCH] Add overlay for ads1115 ADCs (#1864) + +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 22 ++++++ + arch/arm/boot/dts/overlays/ads1115-overlay.dts | 103 +++++++++++++++++++++++++ + 3 files changed, 126 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/ads1115-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -4,6 +4,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + adau1977-adc.dtbo \ + adau7002-simple.dtbo \ + ads1015.dtbo \ ++ ads1115.dtbo \ + ads7846.dtbo \ + akkordion-iqdacplus.dtbo \ + allo-piano-dac-pcm512x-audio.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -196,6 +196,28 @@ Params: addr I2C bus + http://www.ti.com/lit/ds/symlink/ads1015.pdf + + ++Name: ads1115 ++Info: Texas Instruments ADS1115 ADC ++Load: dtoverlay=ads1115,[=] ++Params: addr I2C bus address of device. Set based on how the ++ addr pin is wired. (default=0x48 assumes addr ++ is pulled to GND) ++ cha_enable Enable virtual channel a. ++ cha_cfg Set the configuration for virtual channel a. ++ (default=4 configures this channel for the ++ voltage at A0 with respect to GND) ++ cha_datarate Set the datarate (samples/sec) for this channel. ++ (default=7 sets 860 sps) ++ cha_gain Set the gain of the Programmable Gain ++ Amplifier for this channel. (Default 1 sets the ++ full scale of the channel to 4.096 Volts) ++ ++ Channel parameters can be set for each enabled channel. ++ A maximum of 4 channels can be enabled (letters a thru d). ++ For more information refer to the device datasheet at: ++ http://www.ti.com/lit/ds/symlink/ads1115.pdf ++ ++ + Name: ads7846 + Info: ADS7846 Touch controller + Load: dtoverlay=ads7846,= +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/ads1115-overlay.dts +@@ -0,0 +1,103 @@ ++/* ++ * TI ADS1115 multi-channel ADC overlay ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2708"; ++ ++ fragment@0 { ++ target = <&i2c_arm>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ ads1115: ads1115 { ++ compatible = "ti,ads1115"; ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x48>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target-path = "i2c_arm/ads1115"; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ channel_a: channel_a { ++ reg = <4>; ++ ti,gain = <1>; ++ ti,datarate = <7>; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "i2c_arm/ads1115"; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ channel_b: channel_b { ++ reg = <5>; ++ ti,gain = <1>; ++ ti,datarate = <7>; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "i2c_arm/ads1115"; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ channel_c: channel_c { ++ reg = <6>; ++ ti,gain = <1>; ++ ti,datarate = <7>; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "i2c_arm/ads1115"; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ channel_d: channel_d { ++ reg = <7>; ++ ti,gain = <1>; ++ ti,datarate = <7>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ addr = <&ads1115>,"reg:0"; ++ cha_enable = <0>,"=1"; ++ cha_cfg = <&channel_a>,"reg:0"; ++ cha_gain = <&channel_a>,"ti,gain:0"; ++ cha_datarate = <&channel_a>,"ti,datarate:0"; ++ chb_enable = <0>,"=2"; ++ chb_cfg = <&channel_b>,"reg:0"; ++ chb_gain = <&channel_b>,"ti,gain:0"; ++ chb_datarate = <&channel_b>,"ti,datarate:0"; ++ chc_enable = <0>,"=3"; ++ chc_cfg = <&channel_c>,"reg:0"; ++ chc_gain = <&channel_c>,"ti,gain:0"; ++ chc_datarate = <&channel_c>,"ti,datarate:0"; ++ chd_enable = <0>,"=4"; ++ chd_cfg = <&channel_d>,"reg:0"; ++ chd_gain = <&channel_d>,"ti,gain:0"; ++ chd_datarate = <&channel_d>,"ti,datarate:0"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.9/950-0194-clk-bcm2835-Correct-the-prediv-logic.patch b/target/linux/brcm2708/patches-4.9/950-0194-clk-bcm2835-Correct-the-prediv-logic.patch new file mode 100644 index 000000000000..c81194fe69e1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0194-clk-bcm2835-Correct-the-prediv-logic.patch @@ -0,0 +1,27 @@ +From a9913dccdeaabca37343d0d8b0a48cda1e434e02 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 1 Mar 2017 16:06:53 +0000 +Subject: [PATCH] clk-bcm2835: Correct the prediv logic + +If a clock has the prediv flag set, both the integer and fractional +parts must be scaled when calculating the resulting frequency. + +Signed-off-by: Phil Elwell +--- + drivers/clk/bcm/clk-bcm2835.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -616,8 +616,10 @@ static unsigned long bcm2835_pll_get_rat + using_prediv = cprman_read(cprman, data->ana_reg_base + 4) & + data->ana->fb_prediv_mask; + +- if (using_prediv) ++ if (using_prediv) { + ndiv *= 2; ++ fdiv *= 2; ++ } + + return bcm2835_pll_rate_from_divisors(parent_rate, ndiv, fdiv, pdiv); + } diff --git a/target/linux/brcm2708/patches-4.9/950-0195-amba_pl011-Round-input-clock-up.patch b/target/linux/brcm2708/patches-4.9/950-0195-amba_pl011-Round-input-clock-up.patch new file mode 100644 index 000000000000..2bd501d8db58 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0195-amba_pl011-Round-input-clock-up.patch @@ -0,0 +1,86 @@ +From 0360d687752df3c5546dd1534904a6e0168b6360 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 1 Mar 2017 16:07:39 +0000 +Subject: [PATCH] amba_pl011: Round input clock up + +The UART clock is initialised to be as close to the requested +frequency as possible without exceeding it. Now that there is a +clock manager that returns the actual frequencies, an expected +48MHz clock is reported as 47999625. If the requested baudrate +== requested clock/16, there is no headroom and the slight +reduction in actual clock rate results in failure. + +Detect cases where it looks like a "round" clock was chosen and +adjust the reported clock to match that "round" value. As the +code comment says: + +/* + * If increasing a clock by less than 0.1% changes it + * from ..999.. to ..000.., round up. + */ + +Signed-off-by: Phil Elwell +--- + drivers/tty/serial/amba-pl011.c | 23 +++++++++++++++++++++-- + 1 file changed, 21 insertions(+), 2 deletions(-) + +--- a/drivers/tty/serial/amba-pl011.c ++++ b/drivers/tty/serial/amba-pl011.c +@@ -1646,6 +1646,23 @@ static void pl011_put_poll_char(struct u + + #endif /* CONFIG_CONSOLE_POLL */ + ++unsigned long pl011_clk_round(unsigned long clk) ++{ ++ unsigned long scaler; ++ ++ /* ++ * If increasing a clock by less than 0.1% changes it ++ * from ..999.. to ..000.., round up. ++ */ ++ scaler = 1; ++ while (scaler * 100000 < clk) ++ scaler *= 10; ++ if ((clk + scaler - 1)/scaler % 1000 == 0) ++ clk = (clk/scaler + 1) * scaler; ++ ++ return clk; ++} ++ + static int pl011_hwinit(struct uart_port *port) + { + struct uart_amba_port *uap = +@@ -1662,7 +1679,7 @@ static int pl011_hwinit(struct uart_port + if (retval) + return retval; + +- uap->port.uartclk = clk_get_rate(uap->clk); ++ uap->port.uartclk = pl011_clk_round(clk_get_rate(uap->clk)); + + /* Clear pending error and receive interrupts */ + pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS | +@@ -2300,7 +2317,7 @@ static int __init pl011_console_setup(st + plat->init(); + } + +- uap->port.uartclk = clk_get_rate(uap->clk); ++ uap->port.uartclk = pl011_clk_round(clk_get_rate(uap->clk)); + + if (uap->vendor->fixed_options) { + baud = uap->fixed_baud; +@@ -2372,6 +2389,7 @@ static struct uart_driver amba_reg = { + .cons = AMBA_CONSOLE, + }; + ++#if 0 + static int pl011_probe_dt_alias(int index, struct device *dev) + { + struct device_node *np; +@@ -2403,6 +2421,7 @@ static int pl011_probe_dt_alias(int inde + + return ret; + } ++#endif + + /* unregisters the driver also if no more ports are left */ + static void pl011_unregister_port(struct uart_amba_port *uap) diff --git a/target/linux/brcm2708/patches-4.9/950-0196-BCM2835-V4L2-Ensure-H264-header-bytes-get-a-sensible.patch b/target/linux/brcm2708/patches-4.9/950-0196-BCM2835-V4L2-Ensure-H264-header-bytes-get-a-sensible.patch new file mode 100644 index 000000000000..df8d4b4a4fe0 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0196-BCM2835-V4L2-Ensure-H264-header-bytes-get-a-sensible.patch @@ -0,0 +1,87 @@ +From 02ceda02182f6cb538be397b8d8f34b64a254559 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 13 Feb 2017 11:10:50 +0000 +Subject: [PATCH] BCM2835-V4L2: Ensure H264 header bytes get a sensible + timestamp + +H264 header come off VC with 0 timestamps, which means they get a +strange timestamp when processed with VC/kernel start times, +particularly if used with the inline header option. +Remember the last frame timestamp and use that if set, or otherwise +use the kernel start time. + +https://github.com/raspberrypi/linux/issues/1836 + +Signed-off-by: Dave Stevenson +--- + drivers/media/platform/bcm2835/bcm2835-camera.c | 30 ++++++++++++++++++++++--- + drivers/media/platform/bcm2835/bcm2835-camera.h | 2 ++ + 2 files changed, 29 insertions(+), 3 deletions(-) + +--- a/drivers/media/platform/bcm2835/bcm2835-camera.c ++++ b/drivers/media/platform/bcm2835/bcm2835-camera.c +@@ -356,8 +356,13 @@ static void buffer_cb(struct vchiq_mmal_ + } + } else { + if (dev->capture.frame_count) { +- if (dev->capture.vc_start_timestamp != -1 && +- pts != 0) { ++ if (dev->capture.vc_start_timestamp == -1) { ++ buf->vb.vb2_buf.timestamp = ktime_get_ns(); ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Buffer time set as current time - %lld", ++ buf->vb.vb2_buf.timestamp); ++ ++ } else if(pts != 0) { + struct timeval timestamp; + s64 runtime_us = pts - + dev->capture.vc_start_timestamp; +@@ -390,10 +395,27 @@ static void buffer_cb(struct vchiq_mmal_ + buf->vb.vb2_buf.timestamp = timestamp.tv_sec * 1000000000ULL + + timestamp.tv_usec * 1000ULL; + } else { +- buf->vb.vb2_buf.timestamp = ktime_get_ns(); ++ if (dev->capture.last_timestamp) { ++ buf->vb.vb2_buf.timestamp = dev->capture.last_timestamp; ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Buffer time set as last timestamp - %lld", ++ buf->vb.vb2_buf.timestamp); ++ } ++ else { ++ buf->vb.vb2_buf.timestamp = ++ dev->capture.kernel_start_ts.tv_sec * 1000000000ULL + ++ dev->capture.kernel_start_ts.tv_usec * 1000ULL; ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Buffer time set as start timestamp - %lld", ++ buf->vb.vb2_buf.timestamp); ++ } + } ++ dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; + + vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); ++ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, ++ "Buffer has ts %llu", ++ dev->capture.last_timestamp); + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); + + if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_EOS && +@@ -559,6 +581,8 @@ static int start_streaming(struct vb2_qu + "Start time %lld size %d\n", + dev->capture.vc_start_timestamp, parameter_size); + ++ dev->capture.last_timestamp = 0; ++ + v4l2_get_timestamp(&dev->capture.kernel_start_ts); + + /* enable the camera port */ +--- a/drivers/media/platform/bcm2835/bcm2835-camera.h ++++ b/drivers/media/platform/bcm2835/bcm2835-camera.h +@@ -93,6 +93,8 @@ struct bm2835_mmal_dev { + s64 vc_start_timestamp; + /* Kernel start timestamp for streaming */ + struct timeval kernel_start_ts; ++ /* Timestamp of last frame */ ++ u64 last_timestamp; + + struct vchiq_mmal_port *port; /* port being used for capture */ + /* camera port being used for capture */ diff --git a/target/linux/brcm2708/patches-4.9/950-0197-BCM2835-V4L2-Correctly-denote-key-frames-in-encoded-.patch b/target/linux/brcm2708/patches-4.9/950-0197-BCM2835-V4L2-Correctly-denote-key-frames-in-encoded-.patch new file mode 100644 index 000000000000..4b375abad9a1 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0197-BCM2835-V4L2-Correctly-denote-key-frames-in-encoded-.patch @@ -0,0 +1,24 @@ +From 9136b739f4ecc714db0431a3e0f4f4d9b12ab670 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 13 Feb 2017 13:11:41 +0000 +Subject: [PATCH] BCM2835-V4L2: Correctly denote key frames in encoded data + +Forward MMAL key frame flags to the V4L2 buffers. + +Signed-off-by: Dave Stevenson +--- + drivers/media/platform/bcm2835/bcm2835-camera.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/media/platform/bcm2835/bcm2835-camera.c ++++ b/drivers/media/platform/bcm2835/bcm2835-camera.c +@@ -413,6 +413,9 @@ static void buffer_cb(struct vchiq_mmal_ + dev->capture.last_timestamp = buf->vb.vb2_buf.timestamp; + + vb2_set_plane_payload(&buf->vb.vb2_buf, 0, length); ++ if (mmal_flags & MMAL_BUFFER_HEADER_FLAG_KEYFRAME) ++ buf->vb.flags |= V4L2_BUF_FLAG_KEYFRAME; ++ + v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, + "Buffer has ts %llu", + dev->capture.last_timestamp); diff --git a/target/linux/brcm2708/patches-4.9/950-0198-bcm2835-gpio-exp-Driver-for-GPIO-expander-via-mailbo.patch b/target/linux/brcm2708/patches-4.9/950-0198-bcm2835-gpio-exp-Driver-for-GPIO-expander-via-mailbo.patch new file mode 100644 index 000000000000..3d09d1dc3f56 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0198-bcm2835-gpio-exp-Driver-for-GPIO-expander-via-mailbo.patch @@ -0,0 +1,405 @@ +From 2f8f62fbd42a55825da437faba4b6164f2e0bee9 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 20 Feb 2017 17:01:21 +0000 +Subject: [PATCH] bcm2835-gpio-exp: Driver for GPIO expander via mailbox + service + +Pi3 and Compute Module 3 have a GPIO expander that the +VPU communicates with. +There is a mailbox service that now allows control of this +expander, so add a kernel driver that can make use of it. + +Pwr_led node added to device-tree for Pi3. + +Signed-off-by: Dave Stevenson +--- + arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 22 +++ + arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 10 +- + arch/arm/configs/bcm2709_defconfig | 1 + + drivers/gpio/Kconfig | 7 + + drivers/gpio/Makefile | 1 + + drivers/gpio/gpio-bcm-exp.c | 256 +++++++++++++++++++++++++++++ + include/soc/bcm2835/raspberrypi-firmware.h | 4 + + 7 files changed, 300 insertions(+), 1 deletion(-) + create mode 100644 drivers/gpio/gpio-bcm-exp.c + +--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -96,6 +96,14 @@ + firmware = <&firmware>; + status = "okay"; + }; ++ ++ expgpio: expgpio { ++ compatible = "brcm,bcm2835-expgpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; + }; + + &fb { +@@ -163,6 +171,16 @@ + linux,default-trigger = "mmc0"; + gpios = <&virtgpio 0 0>; + }; ++ ++ pwr_led: pwr { ++ label = "led1"; ++ linux,default-trigger = "input"; ++ gpios = <&expgpio 7 GPIO_ACTIVE_LOW>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>; + }; + + &audio { +@@ -193,6 +211,10 @@ + act_led_activelow = <&act_led>,"gpios:8"; + act_led_trigger = <&act_led>,"linux,default-trigger"; + ++ pwr_led_gpio = <&pwr_led>,"gpios:4"; ++ pwr_led_activelow = <&pwr_led>,"gpios:8"; ++ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; ++ + audio = <&audio>,"status"; + watchdog = <&watchdog>,"status"; + random = <&random>,"status"; +--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts ++++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +@@ -65,6 +65,14 @@ + firmware = <&firmware>; + status = "okay"; + }; ++ ++ expgpio: expgpio { ++ compatible = "brcm,bcm2835-expgpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; + }; + + &fb { +@@ -123,7 +131,7 @@ + }; + + &hdmi { +- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++ hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>; + }; + + &audio { +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -625,6 +625,7 @@ CONFIG_PPS=m + CONFIG_PPS_CLIENT_LDISC=m + CONFIG_PPS_CLIENT_GPIO=m + CONFIG_GPIO_SYSFS=y ++CONFIG_GPIO_BCM_EXP=y + CONFIG_GPIO_BCM_VIRT=y + CONFIG_GPIO_ARIZONA=m + CONFIG_GPIO_STMPE=y +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -128,6 +128,13 @@ config GPIO_AXP209 + help + Say yes to enable GPIO support for the AXP209 PMIC + ++config GPIO_BCM_EXP ++ bool "Broadcom Exp GPIO" ++ depends on OF_GPIO && RASPBERRYPI_FIRMWARE && (ARCH_BCM2835 || COMPILE_TEST) ++ help ++ Turn on GPIO support for Broadcom chips using the firmware mailbox ++ to communicate with VideoCore on BCM283x chips. ++ + config GPIO_BCM_KONA + bool "Broadcom Kona GPIO" + depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST) +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -30,6 +30,7 @@ obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizo + obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o + obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o + obj-$(CONFIG_GPIO_AXP209) += gpio-axp209.o ++obj-$(CONFIG_GPIO_BCM_EXP) += gpio-bcm-exp.o + obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o + obj-$(CONFIG_GPIO_BCM_VIRT) += gpio-bcm-virt.o + obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o +--- /dev/null ++++ b/drivers/gpio/gpio-bcm-exp.c +@@ -0,0 +1,256 @@ ++/* ++ * Broadcom expander GPIO driver ++ * ++ * Uses the firmware mailbox service to communicate with the ++ * GPIO expander on the VPU. ++ * ++ * Copyright (C) 2017 Raspberry Pi Trading Ltd. ++ * ++ * Author: Dave Stevenson ++ * Based on gpio-bcm-virt.c by Dom Cobley ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define MODULE_NAME "brcmexp-gpio" ++#define NUM_GPIO 8 ++ ++struct brcmexp_gpio { ++ struct gpio_chip gc; ++ struct device *dev; ++ struct rpi_firmware *fw; ++}; ++ ++struct gpio_set_config { ++ u32 gpio, direction, polarity, term_en, term_pull_up, state; ++}; ++ ++struct gpio_get_config { ++ u32 gpio, direction, polarity, term_en, term_pull_up; ++}; ++ ++struct gpio_get_set_state { ++ u32 gpio, state; ++}; ++ ++static int brcmexp_gpio_get_polarity(struct gpio_chip *gc, unsigned int off) ++{ ++ struct brcmexp_gpio *gpio; ++ struct gpio_get_config get; ++ int ret; ++ ++ gpio = container_of(gc, struct brcmexp_gpio, gc); ++ ++ get.gpio = off + gpio->gc.base; /* GPIO to update */ ++ ++ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_CONFIG, ++ &get, sizeof(get)); ++ if (ret) { ++ dev_err(gpio->dev, ++ "Failed to get GPIO %u config (%d)\n", off, ret); ++ return ret; ++ } ++ return get.polarity; ++} ++ ++static int brcmexp_gpio_dir_in(struct gpio_chip *gc, unsigned int off) ++{ ++ struct brcmexp_gpio *gpio; ++ struct gpio_set_config set_in; ++ int ret; ++ ++ gpio = container_of(gc, struct brcmexp_gpio, gc); ++ ++ set_in.gpio = off + gpio->gc.base; /* GPIO to update */ ++ set_in.direction = 0; /* Input */ ++ set_in.polarity = brcmexp_gpio_get_polarity(gc, off); ++ /* Retain existing setting */ ++ set_in.term_en = 0; /* termination disabled */ ++ set_in.term_pull_up = 0; /* n/a as termination disabled */ ++ set_in.state = 0; /* n/a as configured as an input */ ++ ++ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_CONFIG, ++ &set_in, sizeof(set_in)); ++ if (ret) { ++ dev_err(gpio->dev, ++ "Failed to set GPIO %u to input (%d)\n", ++ off, ret); ++ return ret; ++ } ++ return 0; ++} ++ ++static int brcmexp_gpio_dir_out(struct gpio_chip *gc, unsigned int off, int val) ++{ ++ struct brcmexp_gpio *gpio; ++ struct gpio_set_config set_out; ++ int ret; ++ ++ gpio = container_of(gc, struct brcmexp_gpio, gc); ++ ++ set_out.gpio = off + gpio->gc.base; /* GPIO to update */ ++ set_out.direction = 1; /* Output */ ++ set_out.polarity = brcmexp_gpio_get_polarity(gc, off); ++ /* Retain existing setting */ ++ set_out.term_en = 0; /* n/a as an output */ ++ set_out.term_pull_up = 0; /* n/a as termination disabled */ ++ set_out.state = val; /* Output state */ ++ ++ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_CONFIG, ++ &set_out, sizeof(set_out)); ++ if (ret) { ++ dev_err(gpio->dev, ++ "Failed to set GPIO %u to output (%d)\n", off, ret); ++ return ret; ++ } ++ return 0; ++} ++ ++static int brcmexp_gpio_get_direction(struct gpio_chip *gc, unsigned int off) ++{ ++ struct brcmexp_gpio *gpio; ++ struct gpio_get_config get; ++ int ret; ++ ++ gpio = container_of(gc, struct brcmexp_gpio, gc); ++ ++ get.gpio = off + gpio->gc.base; /* GPIO to update */ ++ ++ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_CONFIG, ++ &get, sizeof(get)); ++ if (ret) { ++ dev_err(gpio->dev, ++ "Failed to get GPIO %u config (%d)\n", off, ret); ++ return ret; ++ } ++ return get.direction ? GPIOF_DIR_OUT : GPIOF_DIR_IN; ++} ++ ++static int brcmexp_gpio_get(struct gpio_chip *gc, unsigned int off) ++{ ++ struct brcmexp_gpio *gpio; ++ struct gpio_get_set_state get; ++ int ret; ++ ++ gpio = container_of(gc, struct brcmexp_gpio, gc); ++ ++ get.gpio = off + gpio->gc.base; /* GPIO to update */ ++ get.state = 0; /* storage for returned value */ ++ ++ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_STATE, ++ &get, sizeof(get)); ++ if (ret) { ++ dev_err(gpio->dev, ++ "Failed to get GPIO %u state (%d)\n", off, ret); ++ return ret; ++ } ++ return !!get.state; ++} ++ ++static void brcmexp_gpio_set(struct gpio_chip *gc, unsigned int off, int val) ++{ ++ struct brcmexp_gpio *gpio; ++ struct gpio_get_set_state set; ++ int ret; ++ ++ gpio = container_of(gc, struct brcmexp_gpio, gc); ++ ++ off += gpio->gc.base; ++ ++ set.gpio = off + gpio->gc.base; /* GPIO to update */ ++ set.state = val; /* Output state */ ++ ++ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_STATE, ++ &set, sizeof(set)); ++ if (ret) ++ dev_err(gpio->dev, ++ "Failed to set GPIO %u state (%d)\n", off, ret); ++} ++ ++static int brcmexp_gpio_probe(struct platform_device *pdev) ++{ ++ int err = 0; ++ struct device *dev = &pdev->dev; ++ struct device_node *np = dev->of_node; ++ struct device_node *fw_node; ++ struct rpi_firmware *fw; ++ struct brcmexp_gpio *ucb; ++ ++ fw_node = of_parse_phandle(np, "firmware", 0); ++ if (!fw_node) { ++ dev_err(dev, "Missing firmware node\n"); ++ return -ENOENT; ++ } ++ ++ fw = rpi_firmware_get(fw_node); ++ if (!fw) ++ return -EPROBE_DEFER; ++ ++ ucb = devm_kzalloc(dev, sizeof(*ucb), GFP_KERNEL); ++ if (!ucb) ++ return -EINVAL; ++ ++ ucb->fw = fw; ++ ucb->dev = dev; ++ ucb->gc.label = MODULE_NAME; ++ ucb->gc.owner = THIS_MODULE; ++ ucb->gc.of_node = np; ++ ucb->gc.base = 128; ++ ucb->gc.ngpio = NUM_GPIO; ++ ++ ucb->gc.direction_input = brcmexp_gpio_dir_in; ++ ucb->gc.direction_output = brcmexp_gpio_dir_out; ++ ucb->gc.get_direction = brcmexp_gpio_get_direction; ++ ucb->gc.get = brcmexp_gpio_get; ++ ucb->gc.set = brcmexp_gpio_set; ++ ucb->gc.can_sleep = true; ++ ++ err = gpiochip_add(&ucb->gc); ++ if (err) ++ return err; ++ ++ platform_set_drvdata(pdev, ucb); ++ ++ return 0; ++} ++ ++static int brcmexp_gpio_remove(struct platform_device *pdev) ++{ ++ struct brcmexp_gpio *ucb = platform_get_drvdata(pdev); ++ ++ gpiochip_remove(&ucb->gc); ++ ++ return 0; ++} ++ ++static const struct of_device_id __maybe_unused brcmexp_gpio_ids[] = { ++ { .compatible = "brcm,bcm2835-expgpio" }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, brcmexp_gpio_ids); ++ ++static struct platform_driver brcmexp_gpio_driver = { ++ .driver = { ++ .name = MODULE_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(brcmexp_gpio_ids), ++ }, ++ .probe = brcmexp_gpio_probe, ++ .remove = brcmexp_gpio_remove, ++}; ++module_platform_driver(brcmexp_gpio_driver); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Dave Stevenson "); ++MODULE_DESCRIPTION("brcm-exp GPIO driver"); ++MODULE_ALIAS("platform:brcmexp-gpio"); +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -83,7 +83,11 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_SET_TURBO = 0x00038009, + RPI_FIRMWARE_SET_CUSTOMER_OTP = 0x00038021, + RPI_FIRMWARE_SET_DOMAIN_STATE = 0x00038030, ++ RPI_FIRMWARE_GET_GPIO_STATE = 0x00030041, ++ RPI_FIRMWARE_SET_GPIO_STATE = 0x00038041, + RPI_FIRMWARE_SET_SDHOST_CLOCK = 0x00038042, ++ RPI_FIRMWARE_GET_GPIO_CONFIG = 0x00030043, ++ RPI_FIRMWARE_SET_GPIO_CONFIG = 0x00038043, + + /* Dispmanx TAGS */ + RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001, diff --git a/target/linux/brcm2708/patches-4.9/950-0199-BCM270X_DT-Add-bcm2708-rpi-0-w.dts.patch b/target/linux/brcm2708/patches-4.9/950-0199-BCM270X_DT-Add-bcm2708-rpi-0-w.dts.patch new file mode 100644 index 000000000000..c3a87517e2bb --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-0199-BCM270X_DT-Add-bcm2708-rpi-0-w.dts.patch @@ -0,0 +1,225 @@ +From 41620ad7f4b059be162f615a7be423df78406d29 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 24 May 2016 16:30:05 +0100 +Subject: [PATCH] BCM270X_DT: Add bcm2708-rpi-0-w.dts + +Add DT support for the Pi Zero W. N.B. It will not be loaded +automatically without a corresponding change to the firmware. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/bcm2708-rpi-0-w.dts | 197 ++++++++++++++++++++++++++++++++++ + 2 files changed, 198 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm2708-rpi-0-w.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ + bcm2708-rpi-b.dtb \ + bcm2708-rpi-b-plus.dtb \ + bcm2708-rpi-cm.dtb \ ++ bcm2708-rpi-0-w.dtb \ + bcm2709-rpi-2-b.dtb \ + bcm2710-rpi-3-b.dtb \ + bcm2710-rpi-cm3.dtb +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-0-w.dts +@@ -0,0 +1,197 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++ ++/ { ++ model = "Raspberry Pi Zero W"; ++}; ++ ++&gpio { ++ sdhost_pins: sdhost_pins { ++ brcm,pins = <48 49 50 51 52 53>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = <7>; /* ALT3 = SD1 */ ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = <43>; ++ brcm,function = <4>; /* alt0:GPCLK2 */ ++ brcm,pull = <0>; /* none */ ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <30 31 32 33>; ++ brcm,function = <7>; /* alt3=UART0 */ ++ brcm,pull = <2 0 0 2>; /* up none none up */ ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++ }; ++}; ++ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&mmc { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ non-removable; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&fb { ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <500000>; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ #sound-dai-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&random { ++ status = "okay"; ++}; ++ ++&leds { ++ act_led: act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 47 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&audio { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ chosen { ++ bootargs = "8250.nr_uarts=1"; ++ }; ++}; ++ ++/ { ++ __overrides__ { ++ uart0 = <&uart0>,"status"; ++ uart1 = <&uart1>,"status"; ++ i2s = <&i2s>,"status"; ++ spi = <&spi0>,"status"; ++ i2c0 = <&i2c0>,"status"; ++ i2c1 = <&i2c1>,"status"; ++ i2c2_iknowwhatimdoing = <&i2c2>,"status"; ++ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; ++ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; ++ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ audio = <&audio>,"status"; ++ watchdog = <&watchdog>,"status"; ++ random = <&random>,"status"; ++ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; ++ sd_force_pio = <&sdhost>,"brcm,force-pio?"; ++ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; ++ sd_debug = <&sdhost>,"brcm,debug"; ++ }; ++}; diff --git a/target/linux/brcm2708/patches-4.9/950-1000-mfd-rpisense-disable.patch b/target/linux/brcm2708/patches-4.9/950-1000-mfd-rpisense-disable.patch new file mode 100644 index 000000000000..164e8447f6c5 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-1000-mfd-rpisense-disable.patch @@ -0,0 +1,10 @@ +--- a/drivers/mfd/Kconfig ++++ b/drivers/mfd/Kconfig +@@ -13,6 +13,7 @@ config MFD_CORE + config MFD_RPISENSE_CORE + tristate "Raspberry Pi Sense HAT core functions" + depends on I2C ++ depends on BROKEN + select MFD_CORE + help + This is the core driver for the Raspberry Pi Sense HAT. This provides diff --git a/target/linux/brcm2708/patches-4.9/950-1001-sound-soc-rpi-cirrus-disable.patch b/target/linux/brcm2708/patches-4.9/950-1001-sound-soc-rpi-cirrus-disable.patch new file mode 100644 index 000000000000..87a57a831d7d --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/950-1001-sound-soc-rpi-cirrus-disable.patch @@ -0,0 +1,10 @@ +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -48,6 +48,7 @@ config SND_BCM2708_SOC_HIFIBERRY_AMP + config SND_BCM2708_SOC_RPI_CIRRUS + tristate "Support for Cirrus Logic Audio Card" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ depends on BROKEN + select SND_SOC_WM5102 + select SND_SOC_WM8804 + help diff --git a/target/linux/brcm2708/patches-4.9/999-0174-ARM-dts-bcm283x-Add-VEC-node-in-bcm283x.dtsi.patch b/target/linux/brcm2708/patches-4.9/999-0174-ARM-dts-bcm283x-Add-VEC-node-in-bcm283x.dtsi.patch new file mode 100644 index 000000000000..a2671f243972 --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/999-0174-ARM-dts-bcm283x-Add-VEC-node-in-bcm283x.dtsi.patch @@ -0,0 +1,31 @@ +From 9389f17c3c92c3ec54e0d689ad46b95b90a8039a Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Fri, 2 Dec 2016 14:48:12 +0100 +Subject: [PATCH] ARM: dts: bcm283x: Add VEC node in bcm283x.dtsi + +Add the VEC (Video EnCoder) node definition in bcm283x.dtsi. + +Signed-off-by: Boris Brezillon +Signed-off-by: Eric Anholt +(cherry picked from commit b899c45208d6f204a6da9a1132577993eeecf0fb) +--- + arch/arm/boot/dts/bcm283x.dtsi | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm/boot/dts/bcm283x.dtsi ++++ b/arch/arm/boot/dts/bcm283x.dtsi +@@ -310,6 +310,14 @@ + status = "disabled"; + }; + ++ vec: vec@7e806000 { ++ compatible = "brcm,bcm2835-vec"; ++ reg = <0x7e806000 0x1000>; ++ clocks = <&clocks BCM2835_CLOCK_VEC>; ++ interrupts = <2 27>; ++ status = "disabled"; ++ }; ++ + pixelvalve@7e807000 { + compatible = "brcm,bcm2835-pixelvalve2"; + reg = <0x7e807000 0x100>; diff --git a/target/linux/brcm2708/patches-4.9/999-0175-ARM-dts-bcm283x-Enable-the-VEC-IP-on-all-RaspberryPi.patch b/target/linux/brcm2708/patches-4.9/999-0175-ARM-dts-bcm283x-Enable-the-VEC-IP-on-all-RaspberryPi.patch new file mode 100644 index 000000000000..8689450266bd --- /dev/null +++ b/target/linux/brcm2708/patches-4.9/999-0175-ARM-dts-bcm283x-Enable-the-VEC-IP-on-all-RaspberryPi.patch @@ -0,0 +1,26 @@ +From 686aed7763ddc3bd31b45454cbe73fb217a3d1c1 Mon Sep 17 00:00:00 2001 +From: Boris Brezillon +Date: Fri, 2 Dec 2016 14:48:13 +0100 +Subject: [PATCH] ARM: dts: bcm283x: Enable the VEC IP on all RaspberryPi + boards + +Enable the VEC IP on all RaspberryPi boards. + +Signed-off-by: Boris Brezillon +Signed-off-by: Eric Anholt +(cherry picked from commit 5ab1a37c6027c114a87a1ae32cfc5ef303d643c5) +--- + arch/arm/boot/dts/bcm2835-rpi.dtsi | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi +@@ -92,3 +92,8 @@ + &dsi1 { + power-domains = <&power RPI_POWER_DOMAIN_DSI1>; + }; ++ ++&vec { ++ power-domains = <&power RPI_POWER_DOMAIN_VEC>; ++ status = "okay"; ++};