From: Felix Fietkau Date: Sat, 29 Sep 2018 16:06:08 +0000 (+0200) Subject: brcm47xx: remove linux 4.9 support X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=fd686dfca3ba7ce8badb65c64933db6ef76ff0b6;p=openwrt%2Fstaging%2Fynezz.git brcm47xx: remove linux 4.9 support Signed-off-by: Felix Fietkau --- diff --git a/target/linux/brcm47xx/config-4.9 b/target/linux/brcm47xx/config-4.9 deleted file mode 100644 index aaca6bc789..0000000000 --- a/target/linux/brcm47xx/config-4.9 +++ /dev/null @@ -1,200 +0,0 @@ -CONFIG_ADM6996_PHY=y -CONFIG_ARCH_BINFMT_ELF_STATE=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_DISCARD_MEMBLOCK=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set -# CONFIG_ARCH_HAS_SG_CHAIN is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_BCM47XX=y -CONFIG_BCM47XX_BCMA=y -CONFIG_BCM47XX_NVRAM=y -CONFIG_BCM47XX_SPROM=y -CONFIG_BCM47XX_SSB=y -CONFIG_BCM47XX_WDT=y -CONFIG_BCMA=y -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_DEBUG=y -CONFIG_BCMA_DRIVER_GMAC_CMN=y -CONFIG_BCMA_DRIVER_GPIO=y -CONFIG_BCMA_DRIVER_MIPS=y -CONFIG_BCMA_DRIVER_PCI=y -CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y -CONFIG_BCMA_HOST_PCI=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -CONFIG_BCMA_HOST_SOC=y -CONFIG_BCMA_NFLASH=y -CONFIG_BCMA_PFLASH=y -CONFIG_BCMA_SFLASH=y -# CONFIG_BGMAC_BCMA is not set -CONFIG_BLK_MQ_PCI=y -CONFIG_CEVT_R4K=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="noinitrd console=ttyS0,115200" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -# CONFIG_CPU_BMIPS is not set -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -CONFIG_CPU_MIPSR1=y -CONFIG_CPU_MIPSR2_IRQ_VI=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_R4K_FPU=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_CSRC_R4K=y -CONFIG_DMA_NONCOHERENT=y -# CONFIG_EARLY_PRINTK is not set -CONFIG_FIXED_PHY=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_WDT=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -# CONFIG_HAVE_ARCH_BITREVERSE is not set -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_CBPF_JIT=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ_PERIODIC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_MIPS_CPU=y -CONFIG_IRQ_WORK=y -CONFIG_LEDS_GPIO_REGISTER=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MIPS=y -CONFIG_MIPS_ASID_BITS=8 -CONFIG_MIPS_ASID_SHIFT=0 -CONFIG_MIPS_CLOCK_VSYSCALL=y -# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set -CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y -# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_BCM47XXSFLASH=y -CONFIG_MTD_BCM47XX_PARTS=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_BCM47XXNFLASH=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_PARSER_TRX=y -CONFIG_MTD_PHYSMAP=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NO_EXCEPT_FILL=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -# CONFIG_NO_IOPORT_MAP is not set -# CONFIG_OF is not set -CONFIG_PCI=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DRIVERS_LEGACY=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -# CONFIG_RCU_STALL_COMMON is not set -# CONFIG_SCHED_INFO is not set -# CONFIG_SCSI_DMA is not set -CONFIG_SERIAL_8250_EXTENDED=y -# CONFIG_SERIAL_8250_FSL is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SRCU=y -CONFIG_SSB=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_BLOCKIO=y -CONFIG_SSB_DEBUG=y -CONFIG_SSB_DRIVER_EXTIF=y -CONFIG_SSB_DRIVER_GIGE=y -CONFIG_SSB_DRIVER_GPIO=y -CONFIG_SSB_DRIVER_MIPS=y -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_EMBEDDED=y -CONFIG_SSB_HOST_SOC=y -CONFIG_SSB_PCICORE_HOSTMODE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_SERIAL=y -CONFIG_SSB_SFLASH=y -CONFIG_SSB_SPROM=y -CONFIG_SWCONFIG=y -CONFIG_SWCONFIG_B53=y -# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set -CONFIG_SWCONFIG_B53_PHY_DRIVER=y -CONFIG_SWCONFIG_B53_PHY_FIXUP=y -# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set -CONFIG_SWPHY=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_HAS_CPU_BMIPS=y -CONFIG_SYS_HAS_CPU_BMIPS32_3300=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_HIGHMEM=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_MIPS16=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y -CONFIG_WATCHDOG_CORE=y diff --git a/target/linux/brcm47xx/patches-4.9/030-MIPS-BCM47XX-Add-Luxul-devices-to-the-database.patch b/target/linux/brcm47xx/patches-4.9/030-MIPS-BCM47XX-Add-Luxul-devices-to-the-database.patch deleted file mode 100644 index 49ba623733..0000000000 --- a/target/linux/brcm47xx/patches-4.9/030-MIPS-BCM47XX-Add-Luxul-devices-to-the-database.patch +++ /dev/null @@ -1,246 +0,0 @@ -From 36b3b702c20e67b18070159dfba80d2084836928 Mon Sep 17 00:00:00 2001 -From: Dan Haab -Date: Mon, 23 Jan 2017 12:50:38 -0700 -Subject: [PATCH] MIPS: BCM47XX: Add Luxul devices to the database -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -So far only Luxul XWR-1750 router was supported. This adds a set of -other Luxul devices based on BCM47XX. It's a standard support for LEDs -and buttons. - -Signed-off-by: Dan Haab -Cc: Hauke Mehrtens -Cc: Rafał Miłecki -Cc: linux-mips@linux-mips.org -Patchwork: https://patchwork.linux-mips.org/patch/15106/ -Signed-off-by: Ralf Baechle ---- - arch/mips/bcm47xx/board.c | 9 +++ - arch/mips/bcm47xx/buttons.c | 72 +++++++++++++++++++ - arch/mips/bcm47xx/leds.c | 81 ++++++++++++++++++++++ - arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 9 +++ - 4 files changed, 171 insertions(+) - ---- a/arch/mips/bcm47xx/board.c -+++ b/arch/mips/bcm47xx/board.c -@@ -149,6 +149,15 @@ struct bcm47xx_board_type_list2 bcm47xx_ - /* board_id */ - static const - struct bcm47xx_board_type_list1 bcm47xx_board_list_board_id[] __initconst = { -+ {{BCM47XX_BOARD_LUXUL_ABR_4400_V1, "Luxul ABR-4400 V1"}, "luxul_abr4400_v1"}, -+ {{BCM47XX_BOARD_LUXUL_XAP_310_V1, "Luxul XAP-310 V1"}, "luxul_xap310_v1"}, -+ {{BCM47XX_BOARD_LUXUL_XAP_1210_V1, "Luxul XAP-1210 V1"}, "luxul_xap1210_v1"}, -+ {{BCM47XX_BOARD_LUXUL_XAP_1230_V1, "Luxul XAP-1230 V1"}, "luxul_xap1230_v1"}, -+ {{BCM47XX_BOARD_LUXUL_XAP_1240_V1, "Luxul XAP-1240 V1"}, "luxul_xap1240_v1"}, -+ {{BCM47XX_BOARD_LUXUL_XAP_1500_V1, "Luxul XAP-1500 V1"}, "luxul_xap1500_v1"}, -+ {{BCM47XX_BOARD_LUXUL_XBR_4400_V1, "Luxul XBR-4400 V1"}, "luxul_xbr4400_v1"}, -+ {{BCM47XX_BOARD_LUXUL_XVW_P30_V1, "Luxul XVW-P30 V1"}, "luxul_xvwp30_v1"}, -+ {{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"}, - {{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"}, - {{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"}, - {{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"}, ---- a/arch/mips/bcm47xx/buttons.c -+++ b/arch/mips/bcm47xx/buttons.c -@@ -308,6 +308,51 @@ bcm47xx_buttons_linksys_wrtsl54gs[] __in - /* Luxul */ - - static const struct gpio_keys_button -+bcm47xx_buttons_luxul_abr_4400_v1[] = { -+ BCM47XX_GPIO_KEY(14, KEY_RESTART), -+}; -+ -+static const struct gpio_keys_button -+bcm47xx_buttons_luxul_xap_310_v1[] = { -+ BCM47XX_GPIO_KEY(20, KEY_RESTART), -+}; -+ -+static const struct gpio_keys_button -+bcm47xx_buttons_luxul_xap_1210_v1[] = { -+ BCM47XX_GPIO_KEY(8, KEY_RESTART), -+}; -+ -+static const struct gpio_keys_button -+bcm47xx_buttons_luxul_xap_1230_v1[] = { -+ BCM47XX_GPIO_KEY(8, KEY_RESTART), -+}; -+ -+static const struct gpio_keys_button -+bcm47xx_buttons_luxul_xap_1240_v1[] = { -+ BCM47XX_GPIO_KEY(8, KEY_RESTART), -+}; -+ -+static const struct gpio_keys_button -+bcm47xx_buttons_luxul_xap_1500_v1[] = { -+ BCM47XX_GPIO_KEY(14, KEY_RESTART), -+}; -+ -+static const struct gpio_keys_button -+bcm47xx_buttons_luxul_xbr_4400_v1[] = { -+ BCM47XX_GPIO_KEY(14, KEY_RESTART), -+}; -+ -+static const struct gpio_keys_button -+bcm47xx_buttons_luxul_xvw_p30_v1[] = { -+ BCM47XX_GPIO_KEY(20, KEY_RESTART), -+}; -+ -+static const struct gpio_keys_button -+bcm47xx_buttons_luxul_xwr_600_v1[] = { -+ BCM47XX_GPIO_KEY(8, KEY_RESTART), -+}; -+ -+static const struct gpio_keys_button - bcm47xx_buttons_luxul_xwr_1750_v1[] = { - BCM47XX_GPIO_KEY(14, BTN_TASK), - }; -@@ -567,6 +612,33 @@ int __init bcm47xx_buttons_register(void - err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrtsl54gs); - break; - -+ case BCM47XX_BOARD_LUXUL_ABR_4400_V1: -+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_abr_4400_v1); -+ break; -+ case BCM47XX_BOARD_LUXUL_XAP_310_V1: -+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xap_310_v1); -+ break; -+ case BCM47XX_BOARD_LUXUL_XAP_1210_V1: -+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xap_1210_v1); -+ break; -+ case BCM47XX_BOARD_LUXUL_XAP_1230_V1: -+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xap_1230_v1); -+ break; -+ case BCM47XX_BOARD_LUXUL_XAP_1240_V1: -+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xap_1240_v1); -+ break; -+ case BCM47XX_BOARD_LUXUL_XAP_1500_V1: -+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xap_1500_v1); -+ break; -+ case BCM47XX_BOARD_LUXUL_XBR_4400_V1: -+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xbr_4400_v1); -+ break; -+ case BCM47XX_BOARD_LUXUL_XVW_P30_V1: -+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xvw_p30_v1); -+ break; -+ case BCM47XX_BOARD_LUXUL_XWR_600_V1: -+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xwr_600_v1); -+ break; - case BCM47XX_BOARD_LUXUL_XWR_1750_V1: - err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xwr_1750_v1); - break; ---- a/arch/mips/bcm47xx/leds.c -+++ b/arch/mips/bcm47xx/leds.c -@@ -373,6 +373,60 @@ bcm47xx_leds_linksys_wrtsl54gs[] __initc - /* Luxul */ - - static const struct gpio_led -+bcm47xx_leds_luxul_abr_4400_v1[] __initconst = { -+ BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF), -+ BCM47XX_GPIO_LED_TRIGGER(15, "green", "status", 0, "timer"), -+}; -+ -+static const struct gpio_led -+bcm47xx_leds_luxul_xap_310_v1[] __initconst = { -+ BCM47XX_GPIO_LED_TRIGGER(6, "green", "status", 1, "timer"), -+}; -+ -+static const struct gpio_led -+bcm47xx_leds_luxul_xap_1210_v1[] __initconst = { -+ BCM47XX_GPIO_LED_TRIGGER(6, "green", "status", 1, "timer"), -+}; -+ -+static const struct gpio_led -+bcm47xx_leds_luxul_xap_1230_v1[] __initconst = { -+ BCM47XX_GPIO_LED(3, "blue", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF), -+ BCM47XX_GPIO_LED(4, "green", "bridge", 0, LEDS_GPIO_DEFSTATE_OFF), -+ BCM47XX_GPIO_LED_TRIGGER(6, "green", "status", 1, "timer"), -+}; -+ -+static const struct gpio_led -+bcm47xx_leds_luxul_xap_1240_v1[] __initconst = { -+ BCM47XX_GPIO_LED(3, "blue", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF), -+ BCM47XX_GPIO_LED(4, "green", "bridge", 0, LEDS_GPIO_DEFSTATE_OFF), -+ BCM47XX_GPIO_LED_TRIGGER(6, "green", "status", 1, "timer"), -+}; -+ -+static const struct gpio_led -+bcm47xx_leds_luxul_xap_1500_v1[] __initconst = { -+ BCM47XX_GPIO_LED_TRIGGER(13, "green", "status", 1, "timer"), -+}; -+ -+static const struct gpio_led -+bcm47xx_leds_luxul_xbr_4400_v1[] __initconst = { -+ BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF), -+ BCM47XX_GPIO_LED_TRIGGER(15, "green", "status", 0, "timer"), -+}; -+ -+static const struct gpio_led -+bcm47xx_leds_luxul_xvw_p30_v1[] __initconst = { -+ BCM47XX_GPIO_LED_TRIGGER(0, "blue", "status", 1, "timer"), -+ BCM47XX_GPIO_LED(1, "green", "link", 1, LEDS_GPIO_DEFSTATE_OFF), -+}; -+ -+static const struct gpio_led -+bcm47xx_leds_luxul_xwr_600_v1[] __initconst = { -+ BCM47XX_GPIO_LED(3, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF), -+ BCM47XX_GPIO_LED_TRIGGER(6, "green", "status", 1, "timer"), -+ BCM47XX_GPIO_LED(9, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF), -+}; -+ -+static const struct gpio_led - bcm47xx_leds_luxul_xwr_1750_v1[] __initconst = { - BCM47XX_GPIO_LED(5, "green", "5ghz", 0, LEDS_GPIO_DEFSTATE_OFF), - BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF), -@@ -633,6 +687,33 @@ void __init bcm47xx_leds_register(void) - bcm47xx_set_pdata(bcm47xx_leds_linksys_wrtsl54gs); - break; - -+ case BCM47XX_BOARD_LUXUL_ABR_4400_V1: -+ bcm47xx_set_pdata(bcm47xx_leds_luxul_abr_4400_v1); -+ break; -+ case BCM47XX_BOARD_LUXUL_XAP_310_V1: -+ bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_310_v1); -+ break; -+ case BCM47XX_BOARD_LUXUL_XAP_1210_V1: -+ bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1210_v1); -+ break; -+ case BCM47XX_BOARD_LUXUL_XAP_1230_V1: -+ bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1230_v1); -+ break; -+ case BCM47XX_BOARD_LUXUL_XAP_1240_V1: -+ bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1240_v1); -+ break; -+ case BCM47XX_BOARD_LUXUL_XAP_1500_V1: -+ bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1500_v1); -+ break; -+ case BCM47XX_BOARD_LUXUL_XBR_4400_V1: -+ bcm47xx_set_pdata(bcm47xx_leds_luxul_xbr_4400_v1); -+ break; -+ case BCM47XX_BOARD_LUXUL_XVW_P30_V1: -+ bcm47xx_set_pdata(bcm47xx_leds_luxul_xvw_p30_v1); -+ break; -+ case BCM47XX_BOARD_LUXUL_XWR_600_V1: -+ bcm47xx_set_pdata(bcm47xx_leds_luxul_xwr_600_v1); -+ break; - case BCM47XX_BOARD_LUXUL_XWR_1750_V1: - bcm47xx_set_pdata(bcm47xx_leds_luxul_xwr_1750_v1); - break; ---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h -+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h -@@ -80,6 +80,15 @@ enum bcm47xx_board { - BCM47XX_BOARD_LINKSYS_WRT610NV2, - BCM47XX_BOARD_LINKSYS_WRTSL54GS, - -+ BCM47XX_BOARD_LUXUL_ABR_4400_V1, -+ BCM47XX_BOARD_LUXUL_XAP_310_V1, -+ BCM47XX_BOARD_LUXUL_XAP_1210_V1, -+ BCM47XX_BOARD_LUXUL_XAP_1230_V1, -+ BCM47XX_BOARD_LUXUL_XAP_1240_V1, -+ BCM47XX_BOARD_LUXUL_XAP_1500_V1, -+ BCM47XX_BOARD_LUXUL_XBR_4400_V1, -+ BCM47XX_BOARD_LUXUL_XVW_P30_V1, -+ BCM47XX_BOARD_LUXUL_XWR_600_V1, - BCM47XX_BOARD_LUXUL_XWR_1750_V1, - - BCM47XX_BOARD_MICROSOFT_MN700, diff --git a/target/linux/brcm47xx/patches-4.9/032-MIPS-BCM47XX-Add-Luxul-XAP1500-XWR1750-WiFi-LEDs.patch b/target/linux/brcm47xx/patches-4.9/032-MIPS-BCM47XX-Add-Luxul-XAP1500-XWR1750-WiFi-LEDs.patch deleted file mode 100644 index d14719ba3d..0000000000 --- a/target/linux/brcm47xx/patches-4.9/032-MIPS-BCM47XX-Add-Luxul-XAP1500-XWR1750-WiFi-LEDs.patch +++ /dev/null @@ -1,86 +0,0 @@ -From 272641206100e89656038180da12eff4f03d79d1 Mon Sep 17 00:00:00 2001 -From: Dan Haab -Date: Tue, 27 Mar 2018 11:24:34 -0600 -Subject: [PATCH] MIPS: BCM47XX: Add Luxul XAP1500/XWR1750 WiFi LEDs - -Some Luxul devices use PCIe connected GPIO LEDs that are not available -until the PCI subsytem and its drivers load. Using the same array for -these LEDs would block registering any LEDs until all GPIOs become -available. This may be undesired behavior as some LEDs should be -available as early as possible (e.g. system status LED). This patch will -allow registering available LEDs while deferring these PCIe GPIO -connected 'extra' LEDs until they become available. - -Signed-off-by: Dan Haab -Cc: Ralf Baechle -Cc: Hauke Mehrtens -Cc: linux-mips@linux-mips.org -Patchwork: https://patchwork.linux-mips.org/patch/18952/ -Signed-off-by: James Hogan ---- - arch/mips/bcm47xx/leds.c | 21 +++++++++++++++++++++ - 1 file changed, 21 insertions(+) - ---- a/arch/mips/bcm47xx/leds.c -+++ b/arch/mips/bcm47xx/leds.c -@@ -408,6 +408,12 @@ bcm47xx_leds_luxul_xap_1500_v1[] __initc - }; - - static const struct gpio_led -+bcm47xx_leds_luxul_xap1500_v1_extra[] __initconst = { -+ BCM47XX_GPIO_LED(44, "green", "5ghz", 0, LEDS_GPIO_DEFSTATE_OFF), -+ BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF), -+}; -+ -+static const struct gpio_led - bcm47xx_leds_luxul_xbr_4400_v1[] __initconst = { - BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF), - BCM47XX_GPIO_LED_TRIGGER(15, "green", "status", 0, "timer"), -@@ -434,6 +440,11 @@ bcm47xx_leds_luxul_xwr_1750_v1[] __initc - BCM47XX_GPIO_LED(15, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF), - }; - -+static const struct gpio_led -+bcm47xx_leds_luxul_xwr1750_v1_extra[] __initconst = { -+ BCM47XX_GPIO_LED(76, "green", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF), -+}; -+ - /* Microsoft */ - - static const struct gpio_led -@@ -527,6 +538,12 @@ static struct gpio_led_platform_data bcm - bcm47xx_leds_pdata.num_leds = ARRAY_SIZE(dev_leds); \ - } while (0) - -+static struct gpio_led_platform_data bcm47xx_leds_pdata_extra __initdata = {}; -+#define bcm47xx_set_pdata_extra(dev_leds) do { \ -+ bcm47xx_leds_pdata_extra.leds = dev_leds; \ -+ bcm47xx_leds_pdata_extra.num_leds = ARRAY_SIZE(dev_leds); \ -+} while (0) -+ - void __init bcm47xx_leds_register(void) - { - enum bcm47xx_board board = bcm47xx_board_get(); -@@ -704,6 +721,7 @@ void __init bcm47xx_leds_register(void) - break; - case BCM47XX_BOARD_LUXUL_XAP_1500_V1: - bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1500_v1); -+ bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xap1500_v1_extra); - break; - case BCM47XX_BOARD_LUXUL_XBR_4400_V1: - bcm47xx_set_pdata(bcm47xx_leds_luxul_xbr_4400_v1); -@@ -716,6 +734,7 @@ void __init bcm47xx_leds_register(void) - break; - case BCM47XX_BOARD_LUXUL_XWR_1750_V1: - bcm47xx_set_pdata(bcm47xx_leds_luxul_xwr_1750_v1); -+ bcm47xx_set_pdata_extra(bcm47xx_leds_luxul_xwr1750_v1_extra); - break; - - case BCM47XX_BOARD_MICROSOFT_MN700: -@@ -759,4 +778,6 @@ void __init bcm47xx_leds_register(void) - } - - gpio_led_register_device(-1, &bcm47xx_leds_pdata); -+ if (bcm47xx_leds_pdata_extra.num_leds) -+ gpio_led_register_device(0, &bcm47xx_leds_pdata_extra); - } diff --git a/target/linux/brcm47xx/patches-4.9/033-MIPS-BCM47XX-Add-support-for-Netgear-WNR1000-V3.patch b/target/linux/brcm47xx/patches-4.9/033-MIPS-BCM47XX-Add-support-for-Netgear-WNR1000-V3.patch deleted file mode 100644 index e4c47605d9..0000000000 --- a/target/linux/brcm47xx/patches-4.9/033-MIPS-BCM47XX-Add-support-for-Netgear-WNR1000-V3.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 88b882ba0b0b7439d16d2c9df7f111cdf793443b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Sun, 8 Apr 2018 22:39:15 +0200 -Subject: [PATCH] MIPS: BCM47XX: Add support for Netgear WNR1000 V3 - -This adds support for detecting this model board and registers some LEDs -and buttons. - -There are two uncommon things regarding this device: -1) It can use two different "board_id" ID values. - Unit I have uses "U12H139T00_NETGEAR" value. This magic is also used - in firmware file header. There are two reports (one from an OpenWrt - user) of a different "U12H139T50_NETGEAR" magic though. -2) Power LEDs share GPIOs with buttons. - Amber one seems to share GPIO 2 with WPS button and green one seems - to share GPIO 3 with reset button. It remains unknown how to support - them and handle buttons at the same time. For that reason they aren't - added to the list of supported LEDs. ---- - arch/mips/bcm47xx/board.c | 2 ++ - arch/mips/bcm47xx/buttons.c | 9 +++++++++ - arch/mips/bcm47xx/leds.c | 9 +++++++++ - arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 1 + - 4 files changed, 21 insertions(+) - ---- a/arch/mips/bcm47xx/board.c -+++ b/arch/mips/bcm47xx/board.c -@@ -171,6 +171,8 @@ struct bcm47xx_board_type_list1 bcm47xx_ - {{BCM47XX_BOARD_NETGEAR_WNDR4000, "Netgear WNDR4000"}, "U12H181T00_NETGEAR"}, - {{BCM47XX_BOARD_NETGEAR_WNDR4500V1, "Netgear WNDR4500 V1"}, "U12H189T00_NETGEAR"}, - {{BCM47XX_BOARD_NETGEAR_WNDR4500V2, "Netgear WNDR4500 V2"}, "U12H224T00_NETGEAR"}, -+ {{BCM47XX_BOARD_NETGEAR_WNR1000_V3, "Netgear WNR1000 V3"}, "U12H139T00_NETGEAR"}, -+ {{BCM47XX_BOARD_NETGEAR_WNR1000_V3, "Netgear WNR1000 V3"}, "U12H139T50_NETGEAR"}, - {{BCM47XX_BOARD_NETGEAR_WNR2000, "Netgear WNR2000"}, "U12H114T00_NETGEAR"}, - {{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "U12H136T99_NETGEAR"}, - {{BCM47XX_BOARD_NETGEAR_WNR3500U, "Netgear WNR3500U"}, "U12H136T00_NETGEAR"}, ---- a/arch/mips/bcm47xx/buttons.c -+++ b/arch/mips/bcm47xx/buttons.c -@@ -411,6 +411,12 @@ bcm47xx_buttons_netgear_wndr4500v1[] __i - }; - - static const struct gpio_keys_button -+bcm47xx_buttons_netgear_wnr1000_v3[] __initconst = { -+ BCM47XX_GPIO_KEY(2, KEY_WPS_BUTTON), -+ BCM47XX_GPIO_KEY(3, KEY_RESTART), -+}; -+ -+static const struct gpio_keys_button - bcm47xx_buttons_netgear_wnr3500lv1[] __initconst = { - BCM47XX_GPIO_KEY(4, KEY_RESTART), - BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON), -@@ -669,6 +675,9 @@ int __init bcm47xx_buttons_register(void - case BCM47XX_BOARD_NETGEAR_WNDR4500V1: - err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500v1); - break; -+ case BCM47XX_BOARD_NETGEAR_WNR1000_V3: -+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr1000_v3); -+ break; - case BCM47XX_BOARD_NETGEAR_WNR3500L: - err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr3500lv1); - break; ---- a/arch/mips/bcm47xx/leds.c -+++ b/arch/mips/bcm47xx/leds.c -@@ -497,6 +497,12 @@ bcm47xx_leds_netgear_wndr4500v1[] __init - }; - - static const struct gpio_led -+bcm47xx_leds_netgear_wnr1000_v3[] __initconst = { -+ BCM47XX_GPIO_LED(0, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF), -+ BCM47XX_GPIO_LED(1, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF), -+}; -+ -+static const struct gpio_led - bcm47xx_leds_netgear_wnr3500lv1[] __initconst = { - BCM47XX_GPIO_LED(0, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), - BCM47XX_GPIO_LED(1, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), -@@ -757,6 +763,9 @@ void __init bcm47xx_leds_register(void) - case BCM47XX_BOARD_NETGEAR_WNDR4500V1: - bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500v1); - break; -+ case BCM47XX_BOARD_NETGEAR_WNR1000_V3: -+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr1000_v3); -+ break; - case BCM47XX_BOARD_NETGEAR_WNR3500L: - bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr3500lv1); - break; ---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h -+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h -@@ -109,6 +109,7 @@ enum bcm47xx_board { - BCM47XX_BOARD_NETGEAR_WNDR4000, - BCM47XX_BOARD_NETGEAR_WNDR4500V1, - BCM47XX_BOARD_NETGEAR_WNDR4500V2, -+ BCM47XX_BOARD_NETGEAR_WNR1000_V3, - BCM47XX_BOARD_NETGEAR_WNR2000, - BCM47XX_BOARD_NETGEAR_WNR3500L, - BCM47XX_BOARD_NETGEAR_WNR3500U, diff --git a/target/linux/brcm47xx/patches-4.9/034-firmware-bcm47xx_nvram-support-small-0x6000-B-NVRAM-.patch b/target/linux/brcm47xx/patches-4.9/034-firmware-bcm47xx_nvram-support-small-0x6000-B-NVRAM-.patch deleted file mode 100644 index 7c860bb7ed..0000000000 --- a/target/linux/brcm47xx/patches-4.9/034-firmware-bcm47xx_nvram-support-small-0x6000-B-NVRAM-.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 663beaeacf2552ed07405e69e96a18775e069eab Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Sun, 8 Apr 2018 22:51:08 +0200 -Subject: [PATCH] firmware: bcm47xx_nvram: support small (0x6000 B) NVRAM - partitions - -Some old devices with 4 MiB flashes were using 0x1000 block size and -could use smaller (0x6000 bytes) flash partition for storing NVRAM -content. This adds support for reading NVRAM on Netgear WNR1000 V3. ---- - drivers/firmware/broadcom/bcm47xx_nvram.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/firmware/broadcom/bcm47xx_nvram.c -+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c -@@ -36,7 +36,7 @@ struct nvram_header { - - static char nvram_buf[NVRAM_SPACE]; - static size_t nvram_len; --static const u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000}; -+static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000}; - - static u32 find_nvram_size(void __iomem *end) - { diff --git a/target/linux/brcm47xx/patches-4.9/159-cpu_fixes.patch b/target/linux/brcm47xx/patches-4.9/159-cpu_fixes.patch deleted file mode 100644 index b424da8d32..0000000000 --- a/target/linux/brcm47xx/patches-4.9/159-cpu_fixes.patch +++ /dev/null @@ -1,509 +0,0 @@ ---- a/arch/mips/include/asm/r4kcache.h -+++ b/arch/mips/include/asm/r4kcache.h -@@ -25,6 +25,38 @@ - extern void (*r4k_blast_dcache)(void); - extern void (*r4k_blast_icache)(void); - -+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2) -+#include -+#include -+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg() -+ -+static inline unsigned long bcm4710_dummy_rreg(void) -+{ -+ return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE)); -+} -+ -+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr)) -+ -+static inline unsigned long bcm4710_fill_tlb(void *addr) -+{ -+ return *(unsigned long *)addr; -+} -+ -+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr)) -+ -+static inline void bcm4710_protected_fill_tlb(void *addr) -+{ -+ unsigned long x; -+ get_dbe(x, (unsigned long *)addr);; -+} -+ -+#else -+#define BCM4710_DUMMY_RREG() -+ -+#define BCM4710_FILL_TLB(addr) -+#define BCM4710_PROTECTED_FILL_TLB(addr) -+#endif -+ - /* - * This macro return a properly sign-extended address suitable as base address - * for indexed cache operations. Two issues here: -@@ -98,6 +130,7 @@ static inline void flush_icache_line_ind - static inline void flush_dcache_line_indexed(unsigned long addr) - { - __dflush_prologue -+ BCM4710_DUMMY_RREG(); - cache_op(Index_Writeback_Inv_D, addr); - __dflush_epilogue - } -@@ -125,6 +158,7 @@ static inline void flush_icache_line(uns - static inline void flush_dcache_line(unsigned long addr) - { - __dflush_prologue -+ BCM4710_DUMMY_RREG(); - cache_op(Hit_Writeback_Inv_D, addr); - __dflush_epilogue - } -@@ -132,6 +166,7 @@ static inline void flush_dcache_line(uns - static inline void invalidate_dcache_line(unsigned long addr) - { - __dflush_prologue -+ BCM4710_DUMMY_RREG(); - cache_op(Hit_Invalidate_D, addr); - __dflush_epilogue - } -@@ -187,6 +222,7 @@ static inline void protected_flush_icach - #ifdef CONFIG_EVA - protected_cachee_op(Hit_Invalidate_I, addr); - #else -+ BCM4710_DUMMY_RREG(); - protected_cache_op(Hit_Invalidate_I, addr); - #endif - break; -@@ -201,6 +237,7 @@ static inline void protected_flush_icach - */ - static inline void protected_writeback_dcache_line(unsigned long addr) - { -+ BCM4710_DUMMY_RREG(); - #ifdef CONFIG_EVA - protected_cachee_op(Hit_Writeback_Inv_D, addr); - #else -@@ -558,8 +595,51 @@ static inline void invalidate_tcache_pag - : "r" (base), \ - "i" (op)); - -+static inline void blast_dcache(void) -+{ -+ unsigned long start = KSEG0; -+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways; -+ unsigned long end = (start + dcache_size); -+ -+ do { -+ BCM4710_DUMMY_RREG(); -+ cache_op(Index_Writeback_Inv_D, start); -+ start += current_cpu_data.dcache.linesz; -+ } while(start < end); -+} -+ -+static inline void blast_dcache_page(unsigned long page) -+{ -+ unsigned long start = page; -+ unsigned long end = start + PAGE_SIZE; -+ -+ BCM4710_FILL_TLB(start); -+ do { -+ BCM4710_DUMMY_RREG(); -+ cache_op(Hit_Writeback_Inv_D, start); -+ start += current_cpu_data.dcache.linesz; -+ } while(start < end); -+} -+ -+static inline void blast_dcache_page_indexed(unsigned long page) -+{ -+ unsigned long start = page; -+ unsigned long end = start + PAGE_SIZE; -+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit; -+ unsigned long ws_end = current_cpu_data.dcache.ways << -+ current_cpu_data.dcache.waybit; -+ unsigned long ws, addr; -+ for (ws = 0; ws < ws_end; ws += ws_inc) { -+ start = page + ws; -+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) { -+ BCM4710_DUMMY_RREG(); -+ cache_op(Index_Writeback_Inv_D, addr); -+ } -+ } -+} -+ - /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */ --#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra) \ -+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra, war) \ - static inline void extra##blast_##pfx##cache##lsize(void) \ - { \ - unsigned long start = INDEX_BASE; \ -@@ -571,6 +651,7 @@ static inline void extra##blast_##pfx##c - \ - __##pfx##flush_prologue \ - \ -+ war \ - for (ws = 0; ws < ws_end; ws += ws_inc) \ - for (addr = start; addr < end; addr += lsize * 32) \ - cache##lsize##_unroll32(addr|ws, indexop); \ -@@ -585,6 +666,7 @@ static inline void extra##blast_##pfx##c - \ - __##pfx##flush_prologue \ - \ -+ war \ - do { \ - cache##lsize##_unroll32(start, hitop); \ - start += lsize * 32; \ -@@ -603,6 +685,8 @@ static inline void extra##blast_##pfx##c - current_cpu_data.desc.waybit; \ - unsigned long ws, addr; \ - \ -+ war \ -+ \ - __##pfx##flush_prologue \ - \ - for (ws = 0; ws < ws_end; ws += ws_inc) \ -@@ -612,26 +696,26 @@ static inline void extra##blast_##pfx##c - __##pfx##flush_epilogue \ - } - --__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, ) --__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, ) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, ) --__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, ) --__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, ) --__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, ) --__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, ) --__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, ) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, ) --__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, ) --__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, ) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, ) -- --__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, ) --__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, ) --__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, ) --__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, ) --__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, ) --__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, ) -+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, , ) -+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, , BCM4710_FILL_TLB(start);) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, , ) -+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, , ) -+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, , BCM4710_FILL_TLB(start);) -+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_, BCM4710_FILL_TLB(start);) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, , ) -+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, , ) -+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, , BCM4710_FILL_TLB(start);) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, , ) -+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, , ) -+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, , ) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, , ) -+ -+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, , ) -+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, , ) -+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, , ) -+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, , ) -+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, , ) -+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, , ) - - #define __BUILD_BLAST_USER_CACHE(pfx, desc, indexop, hitop, lsize) \ - static inline void blast_##pfx##cache##lsize##_user_page(unsigned long page) \ -@@ -660,53 +744,23 @@ __BUILD_BLAST_USER_CACHE(d, dcache, Inde - __BUILD_BLAST_USER_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64) - - /* build blast_xxx_range, protected_blast_xxx_range */ --#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra) \ -+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra, war, war2) \ - static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start, \ - unsigned long end) \ - { \ - unsigned long lsize = cpu_##desc##_line_size(); \ -- unsigned long lsize_2 = lsize * 2; \ -- unsigned long lsize_3 = lsize * 3; \ -- unsigned long lsize_4 = lsize * 4; \ -- unsigned long lsize_5 = lsize * 5; \ -- unsigned long lsize_6 = lsize * 6; \ -- unsigned long lsize_7 = lsize * 7; \ -- unsigned long lsize_8 = lsize * 8; \ - unsigned long addr = start & ~(lsize - 1); \ -- unsigned long aend = (end + lsize - 1) & ~(lsize - 1); \ -- int lines = (aend - addr) / lsize; \ -+ unsigned long aend = (end - 1) & ~(lsize - 1); \ -+ war \ - \ - __##pfx##flush_prologue \ - \ -- while (lines >= 8) { \ -- prot##cache_op(hitop, addr); \ -- prot##cache_op(hitop, addr + lsize); \ -- prot##cache_op(hitop, addr + lsize_2); \ -- prot##cache_op(hitop, addr + lsize_3); \ -- prot##cache_op(hitop, addr + lsize_4); \ -- prot##cache_op(hitop, addr + lsize_5); \ -- prot##cache_op(hitop, addr + lsize_6); \ -- prot##cache_op(hitop, addr + lsize_7); \ -- addr += lsize_8; \ -- lines -= 8; \ -- } \ -- \ -- if (lines & 0x4) { \ -- prot##cache_op(hitop, addr); \ -- prot##cache_op(hitop, addr + lsize); \ -- prot##cache_op(hitop, addr + lsize_2); \ -- prot##cache_op(hitop, addr + lsize_3); \ -- addr += lsize_4; \ -- } \ -- \ -- if (lines & 0x2) { \ -- prot##cache_op(hitop, addr); \ -- prot##cache_op(hitop, addr + lsize); \ -- addr += lsize_2; \ -- } \ -- \ -- if (lines & 0x1) { \ -+ while (1) { \ -+ war2 \ - prot##cache_op(hitop, addr); \ -+ if (addr == aend) \ -+ break; \ -+ addr += lsize; \ - } \ - \ - __##pfx##flush_epilogue \ -@@ -714,8 +768,8 @@ static inline void prot##extra##blast_## - - #ifndef CONFIG_EVA - --__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, ) --__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, ) -+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, , BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();) -+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, , , ) - - #else - -@@ -752,14 +806,14 @@ __BUILD_PROT_BLAST_CACHE_RANGE(d, dcache - __BUILD_PROT_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I) - - #endif --__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, ) -+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, , , ) - __BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I_Loongson2, \ -- protected_, loongson2_) --__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , ) --__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , ) --__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , ) -+ protected_, loongson2_, , ) -+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , , BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();) -+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , , , ) -+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , , , ) - /* blast_inv_dcache_range */ --__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , ) --__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , ) -+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , , , BCM4710_DUMMY_RREG();) -+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , , , ) - - #endif /* _ASM_R4KCACHE_H */ ---- a/arch/mips/include/asm/stackframe.h -+++ b/arch/mips/include/asm/stackframe.h -@@ -365,6 +365,10 @@ - .macro RESTORE_SP_AND_RET - LONG_L sp, PT_R29(sp) - .set arch=r4000 -+#ifdef CONFIG_BCM47XX -+ nop -+ nop -+#endif - eret - .set mips0 - .endm ---- a/arch/mips/kernel/genex.S -+++ b/arch/mips/kernel/genex.S -@@ -21,6 +21,19 @@ - #include - #include - -+#ifdef CONFIG_BCM47XX -+# ifdef eret -+# undef eret -+# endif -+# define eret \ -+ .set push; \ -+ .set noreorder; \ -+ nop; \ -+ nop; \ -+ eret; \ -+ .set pop; -+#endif -+ - __INIT - - /* -@@ -32,6 +45,9 @@ - NESTED(except_vec3_generic, 0, sp) - .set push - .set noat -+#ifdef CONFIG_BCM47XX -+ nop -+#endif - #if R5432_CP0_INTERRUPT_WAR - mfc0 k0, CP0_INDEX - #endif -@@ -55,6 +71,9 @@ NESTED(except_vec3_r4000, 0, sp) - .set push - .set arch=r4000 - .set noat -+#ifdef CONFIG_BCM47XX -+ nop -+#endif - mfc0 k1, CP0_CAUSE - li k0, 31<<2 - andi k1, k1, 0x7c ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -39,6 +39,9 @@ - #include - #include - -+/* For enabling BCM4710 cache workarounds */ -+static int bcm4710 = 0; -+ - /* - * Bits describing what cache ops an SMP callback function may perform. - * -@@ -190,6 +193,9 @@ static void r4k_blast_dcache_user_page_s - { - unsigned long dc_lsize = cpu_dcache_line_size(); - -+ if (bcm4710) -+ r4k_blast_dcache_page = blast_dcache_page; -+ else - if (dc_lsize == 0) - r4k_blast_dcache_user_page = (void *)cache_noop; - else if (dc_lsize == 16) -@@ -208,6 +214,9 @@ static void r4k_blast_dcache_page_indexe - { - unsigned long dc_lsize = cpu_dcache_line_size(); - -+ if (bcm4710) -+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed; -+ else - if (dc_lsize == 0) - r4k_blast_dcache_page_indexed = (void *)cache_noop; - else if (dc_lsize == 16) -@@ -227,6 +236,9 @@ static void r4k_blast_dcache_setup(void) - { - unsigned long dc_lsize = cpu_dcache_line_size(); - -+ if (bcm4710) -+ r4k_blast_dcache = blast_dcache; -+ else - if (dc_lsize == 0) - r4k_blast_dcache = (void *)cache_noop; - else if (dc_lsize == 16) -@@ -957,6 +969,8 @@ static void local_r4k_flush_cache_sigtra - } - - R4600_HIT_CACHEOP_WAR_IMPL; -+ BCM4710_PROTECTED_FILL_TLB(addr); -+ BCM4710_PROTECTED_FILL_TLB(addr + 4); - if (!cpu_has_ic_fills_f_dc) { - if (dc_lsize) - vaddr ? flush_dcache_line(addr & ~(dc_lsize - 1)) -@@ -1845,6 +1859,17 @@ static void coherency_setup(void) - * silly idea of putting something else there ... - */ - switch (current_cpu_type()) { -+ case CPU_BMIPS3300: -+ { -+ u32 cm; -+ cm = read_c0_diag(); -+ /* Enable icache */ -+ cm |= (1 << 31); -+ /* Enable dcache */ -+ cm |= (1 << 30); -+ write_c0_diag(cm); -+ } -+ break; - case CPU_R4000PC: - case CPU_R4000SC: - case CPU_R4000MC: -@@ -1891,6 +1916,15 @@ void r4k_cache_init(void) - extern void build_copy_page(void); - struct cpuinfo_mips *c = ¤t_cpu_data; - -+ /* Check if special workarounds are required */ -+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2) -+ if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) { -+ printk("Enabling BCM4710A0 cache workarounds.\n"); -+ bcm4710 = 1; -+ } else -+#endif -+ bcm4710 = 0; -+ - probe_pcache(); - probe_vcache(); - setup_scache(); -@@ -1968,7 +2002,15 @@ void r4k_cache_init(void) - */ - local_r4k___flush_cache_all(NULL); - -+#ifdef CONFIG_BCM47XX -+ { -+ static void (*_coherency_setup)(void); -+ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup); -+ _coherency_setup(); -+ } -+#else - coherency_setup(); -+#endif - board_cache_error_setup = r4k_cache_error_setup; - - /* ---- a/arch/mips/mm/tlbex.c -+++ b/arch/mips/mm/tlbex.c -@@ -968,6 +968,9 @@ build_get_pgde32(u32 **p, unsigned int t - uasm_i_srl(p, ptr, ptr, SMP_CPUID_PTRSHIFT); - uasm_i_addu(p, ptr, tmp, ptr); - #else -+#ifdef CONFIG_BCM47XX -+ uasm_i_nop(p); -+#endif - UASM_i_LA_mostly(p, ptr, pgdc); - #endif - uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */ -@@ -1310,6 +1313,9 @@ static void build_r4000_tlb_refill_handl - #ifdef CONFIG_64BIT - build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */ - #else -+# ifdef CONFIG_BCM47XX -+ uasm_i_nop(&p); -+# endif - build_get_pgde32(&p, K0, K1); /* get pgd in K1 */ - #endif - -@@ -1321,6 +1327,9 @@ static void build_r4000_tlb_refill_handl - build_update_entries(&p, K0, K1); - build_tlb_write_entry(&p, &l, &r, tlb_random); - uasm_l_leave(&l, p); -+#ifdef CONFIG_BCM47XX -+ uasm_i_nop(&p); -+#endif - uasm_i_eret(&p); /* return from trap */ - } - #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT -@@ -2003,6 +2012,9 @@ build_r4000_tlbchange_handler_head(u32 * - #ifdef CONFIG_64BIT - build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */ - #else -+# ifdef CONFIG_BCM47XX -+ uasm_i_nop(p); -+# endif - build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */ - #endif - -@@ -2049,6 +2061,9 @@ build_r4000_tlbchange_handler_tail(u32 * - build_tlb_write_entry(p, l, r, tlb_indexed); - uasm_l_leave(l, *p); - build_restore_work_registers(p); -+#ifdef CONFIG_BCM47XX -+ uasm_i_nop(p); -+#endif - uasm_i_eret(p); /* return from trap */ - - #ifdef CONFIG_64BIT diff --git a/target/linux/brcm47xx/patches-4.9/160-kmap_coherent.patch b/target/linux/brcm47xx/patches-4.9/160-kmap_coherent.patch deleted file mode 100644 index c66dcb8af6..0000000000 --- a/target/linux/brcm47xx/patches-4.9/160-kmap_coherent.patch +++ /dev/null @@ -1,78 +0,0 @@ -From: Jeff Hansen -Subject: [PATCH] kmap_coherent - -On ASUS WL-500gP there are some "Data bus error"s when executing simple -commands liks "ps" or "cat /proc/1/cmdline". - -This fixes OpenWrt ticket #1485: https://dev.openwrt.org/ticket/1485 ---- ---- a/arch/mips/include/asm/cpu-features.h -+++ b/arch/mips/include/asm/cpu-features.h -@@ -184,6 +184,9 @@ - #ifndef cpu_has_local_ebase - #define cpu_has_local_ebase 1 - #endif -+#ifndef cpu_use_kmap_coherent -+#define cpu_use_kmap_coherent 1 -+#endif - - /* - * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors ---- a/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h -+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h -@@ -79,4 +79,6 @@ - #define cpu_scache_line_size() 0 - #define cpu_has_vz 0 - -+#define cpu_use_kmap_coherent 0 -+ - #endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */ ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -672,7 +672,7 @@ static inline void local_r4k_flush_cache - map_coherent = (cpu_has_dc_aliases && - page_mapcount(page) && - !Page_dcache_dirty(page)); -- if (map_coherent) -+ if (map_coherent && cpu_use_kmap_coherent) - vaddr = kmap_coherent(page, addr); - else - vaddr = kmap_atomic(page); -@@ -697,7 +697,7 @@ static inline void local_r4k_flush_cache - } - - if (vaddr) { -- if (map_coherent) -+ if (map_coherent && cpu_use_kmap_coherent) - kunmap_coherent(); - else - kunmap_atomic(vaddr); ---- a/arch/mips/mm/init.c -+++ b/arch/mips/mm/init.c -@@ -168,7 +168,7 @@ void copy_user_highpage(struct page *to, - void *vfrom, *vto; - - vto = kmap_atomic(to); -- if (cpu_has_dc_aliases && -+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && - page_mapcount(from) && !Page_dcache_dirty(from)) { - vfrom = kmap_coherent(from, vaddr); - copy_page(vto, vfrom); -@@ -190,7 +190,7 @@ void copy_to_user_page(struct vm_area_st - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len) - { -- if (cpu_has_dc_aliases && -+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && - page_mapcount(page) && !Page_dcache_dirty(page)) { - void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); - memcpy(vto, src, len); -@@ -208,7 +208,7 @@ void copy_from_user_page(struct vm_area_ - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len) - { -- if (cpu_has_dc_aliases && -+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && - page_mapcount(page) && !Page_dcache_dirty(page)) { - void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); - memcpy(dst, vfrom, len); diff --git a/target/linux/brcm47xx/patches-4.9/209-b44-register-adm-switch.patch b/target/linux/brcm47xx/patches-4.9/209-b44-register-adm-switch.patch deleted file mode 100644 index 6b2b9f5ae8..0000000000 --- a/target/linux/brcm47xx/patches-4.9/209-b44-register-adm-switch.patch +++ /dev/null @@ -1,121 +0,0 @@ -From b36f694256f41bc71571f467646d015dda128d14 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 9 Nov 2013 17:03:59 +0100 -Subject: [PATCH 210/210] b44: register adm switch - ---- - drivers/net/ethernet/broadcom/b44.c | 57 +++++++++++++++++++++++++++++++++++ - drivers/net/ethernet/broadcom/b44.h | 3 ++ - 2 files changed, 60 insertions(+) - ---- a/drivers/net/ethernet/broadcom/b44.c -+++ b/drivers/net/ethernet/broadcom/b44.c -@@ -31,6 +31,8 @@ - #include - #include - #include -+#include -+#include - - #include - #include -@@ -2250,6 +2252,69 @@ static void b44_adjust_link(struct net_d - } - } - -+#ifdef CONFIG_BCM47XX -+static int b44_register_adm_switch(struct b44 *bp) -+{ -+ int gpio; -+ struct platform_device *pdev; -+ struct adm6996_gpio_platform_data adm_data = {0}; -+ struct platform_device_info info = {0}; -+ -+ adm_data.model = ADM6996L; -+ gpio = bcm47xx_nvram_gpio_pin("adm_eecs"); -+ if (gpio >= 0) -+ adm_data.eecs = gpio; -+ else -+ adm_data.eecs = 2; -+ -+ gpio = bcm47xx_nvram_gpio_pin("adm_eesk"); -+ if (gpio >= 0) -+ adm_data.eesk = gpio; -+ else -+ adm_data.eesk = 3; -+ -+ gpio = bcm47xx_nvram_gpio_pin("adm_eedi"); -+ if (gpio >= 0) -+ adm_data.eedi = gpio; -+ else -+ adm_data.eedi = 4; -+ -+ /* -+ * We ignore the "adm_rc" GPIO here. The driver does not use it, -+ * and it conflicts with the Reset button GPIO on the Linksys WRT54GSv1. -+ */ -+ -+ info.parent = bp->sdev->dev; -+ info.name = "adm6996_gpio"; -+ info.id = -1; -+ info.data = &adm_data; -+ info.size_data = sizeof(adm_data); -+ -+ if (!bp->adm_switch) { -+ pdev = platform_device_register_full(&info); -+ if (IS_ERR(pdev)) -+ return PTR_ERR(pdev); -+ -+ bp->adm_switch = pdev; -+ } -+ return 0; -+} -+static void b44_unregister_adm_switch(struct b44 *bp) -+{ -+ if (bp->adm_switch) -+ platform_device_unregister(bp->adm_switch); -+} -+#else -+static int b44_register_adm_switch(struct b44 *bp) -+{ -+ return 0; -+} -+static void b44_unregister_adm_switch(struct b44 *bp) -+{ -+ -+} -+#endif /* CONFIG_BCM47XX */ -+ - static int b44_register_phy_one(struct b44 *bp) - { - struct mii_bus *mii_bus; -@@ -2285,6 +2350,9 @@ static int b44_register_phy_one(struct b - if (!mdiobus_is_registered_device(bp->mii_bus, bp->phy_addr) && - (sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) { - -+ if (sprom->boardflags_lo & B44_BOARDFLAG_ADM) -+ b44_register_adm_switch(bp); -+ - dev_info(sdev->dev, - "could not find PHY at %i, use fixed one\n", - bp->phy_addr); -@@ -2476,6 +2544,7 @@ static void b44_remove_one(struct ssb_de - unregister_netdev(dev); - if (bp->flags & B44_FLAG_EXTERNAL_PHY) - b44_unregister_phy_one(bp); -+ b44_unregister_adm_switch(bp); - ssb_device_disable(sdev, 0); - ssb_bus_may_powerdown(sdev->bus); - netif_napi_del(&bp->napi); ---- a/drivers/net/ethernet/broadcom/b44.h -+++ b/drivers/net/ethernet/broadcom/b44.h -@@ -407,6 +407,9 @@ struct b44 { - struct mii_bus *mii_bus; - int old_link; - struct mii_if_info mii_if; -+ -+ /* platform device for associated switch */ -+ struct platform_device *adm_switch; - }; - - #endif /* _B44_H */ diff --git a/target/linux/brcm47xx/patches-4.9/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-4.9/210-b44_phy_fix.patch deleted file mode 100644 index a69e9215ad..0000000000 --- a/target/linux/brcm47xx/patches-4.9/210-b44_phy_fix.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- a/drivers/net/ethernet/broadcom/b44.c -+++ b/drivers/net/ethernet/broadcom/b44.c -@@ -431,10 +431,34 @@ static void b44_wap54g10_workaround(stru - error: - pr_warn("PHY: cannot reset MII transceiver isolate bit\n"); - } -+ -+static void b44_bcm47xx_workarounds(struct b44 *bp) -+{ -+ char buf[20]; -+ struct ssb_device *sdev = bp->sdev; -+ -+ /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */ -+ if (sdev->bus->sprom.board_num == 100) { -+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY; -+ } else { -+ /* WL-HDD */ -+ if (bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 && -+ !strncmp(buf, "WL300-", strlen("WL300-"))) { -+ if (sdev->bus->sprom.et0phyaddr == 0 && -+ sdev->bus->sprom.et1phyaddr == 1) -+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY; -+ } -+ } -+ return; -+} - #else - static inline void b44_wap54g10_workaround(struct b44 *bp) - { - } -+ -+static inline void b44_bcm47xx_workarounds(struct b44 *bp) -+{ -+} - #endif - - static int b44_setup_phy(struct b44 *bp) -@@ -443,6 +467,7 @@ static int b44_setup_phy(struct b44 *bp) - int err; - - b44_wap54g10_workaround(bp); -+ b44_bcm47xx_workarounds(bp); - - if (bp->flags & B44_FLAG_EXTERNAL_PHY) - return 0; -@@ -2180,6 +2205,8 @@ static int b44_get_invariants(struct b44 - * valid PHY address. */ - bp->phy_addr &= 0x1F; - -+ b44_bcm47xx_workarounds(bp); -+ - memcpy(bp->dev->dev_addr, addr, ETH_ALEN); - - if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){ diff --git a/target/linux/brcm47xx/patches-4.9/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-4.9/280-activate_ssb_support_in_usb.patch deleted file mode 100644 index 951496ad6b..0000000000 --- a/target/linux/brcm47xx/patches-4.9/280-activate_ssb_support_in_usb.patch +++ /dev/null @@ -1,25 +0,0 @@ -This prevents the options from being delete with make kernel_oldconfig. ---- - drivers/ssb/Kconfig | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/bcma/Kconfig -+++ b/drivers/bcma/Kconfig -@@ -33,6 +33,7 @@ config BCMA_HOST_PCI - config BCMA_HOST_SOC - bool "Support for BCMA in a SoC" - depends on BCMA -+ select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD - help - Host interface for a Broadcom AIX bus directly mapped into - the memory. This only works with the Broadcom SoCs from the ---- a/drivers/ssb/Kconfig -+++ b/drivers/ssb/Kconfig -@@ -157,6 +157,7 @@ config SSB_SFLASH - config SSB_EMBEDDED - bool - depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE -+ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD - default y - - config SSB_DRIVER_EXTIF diff --git a/target/linux/brcm47xx/patches-4.9/300-fork_cacheflush.patch b/target/linux/brcm47xx/patches-4.9/300-fork_cacheflush.patch deleted file mode 100644 index b5efaaf03c..0000000000 --- a/target/linux/brcm47xx/patches-4.9/300-fork_cacheflush.patch +++ /dev/null @@ -1,21 +0,0 @@ -From: Wolfram Joost -Subject: [PATCH] fork_cacheflush - -On ASUS WL-500gP there are many unexpected "Segmentation fault"s that -seem to be caused by a kernel. They can be avoided by: -1) Disabling highpage -2) Using flush_cache_mm in flush_cache_dup_mm - -For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035 ---- ---- a/arch/mips/include/asm/cacheflush.h -+++ b/arch/mips/include/asm/cacheflush.h -@@ -47,7 +47,7 @@ - extern void (*flush_cache_all)(void); - extern void (*__flush_cache_all)(void); - extern void (*flush_cache_mm)(struct mm_struct *mm); --#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0) -+#define flush_cache_dup_mm(mm) flush_cache_mm(mm) - extern void (*flush_cache_range)(struct vm_area_struct *vma, - unsigned long start, unsigned long end); - extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); diff --git a/target/linux/brcm47xx/patches-4.9/310-no_highpage.patch b/target/linux/brcm47xx/patches-4.9/310-no_highpage.patch deleted file mode 100644 index 24b493feb4..0000000000 --- a/target/linux/brcm47xx/patches-4.9/310-no_highpage.patch +++ /dev/null @@ -1,74 +0,0 @@ -From: Jeff Hansen -Subject: [PATCH] no highpage - -On ASUS WL-500gP there are many unexpected "Segmentation fault"s that -seem to be caused by a kernel. They can be avoided by: -1) Disabling highpage -2) Using flush_cache_mm in flush_cache_dup_mm - -For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035 ---- ---- a/arch/mips/include/asm/page.h -+++ b/arch/mips/include/asm/page.h -@@ -71,6 +71,7 @@ static inline unsigned int page_size_ftl - #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */ - - #include -+#include - - extern void build_clear_page(void); - extern void build_copy_page(void); -@@ -105,11 +106,16 @@ static inline void clear_user_page(void - flush_data_cache_page((unsigned long)addr); - } - --struct vm_area_struct; --extern void copy_user_highpage(struct page *to, struct page *from, -- unsigned long vaddr, struct vm_area_struct *vma); -+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, -+ struct page *to) -+{ -+ extern void (*flush_data_cache_page)(unsigned long addr); - --#define __HAVE_ARCH_COPY_USER_HIGHPAGE -+ copy_page(vto, vfrom); -+ if (!cpu_has_ic_fills_f_dc || -+ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK)) -+ flush_data_cache_page((unsigned long)vto); -+} - - /* - * These are used to make use of C type-checking.. ---- a/arch/mips/mm/init.c -+++ b/arch/mips/mm/init.c -@@ -162,30 +162,6 @@ void kunmap_coherent(void) - preempt_enable(); - } - --void copy_user_highpage(struct page *to, struct page *from, -- unsigned long vaddr, struct vm_area_struct *vma) --{ -- void *vfrom, *vto; -- -- vto = kmap_atomic(to); -- if (cpu_has_dc_aliases && cpu_use_kmap_coherent && -- page_mapcount(from) && !Page_dcache_dirty(from)) { -- vfrom = kmap_coherent(from, vaddr); -- copy_page(vto, vfrom); -- kunmap_coherent(); -- } else { -- vfrom = kmap_atomic(from); -- copy_page(vto, vfrom); -- kunmap_atomic(vfrom); -- } -- if ((!cpu_has_ic_fills_f_dc) || -- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK)) -- flush_data_cache_page((unsigned long)vto); -- kunmap_atomic(vto); -- /* Make sure this page is cleared on other CPU's too before using it */ -- smp_wmb(); --} -- - void copy_to_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len) diff --git a/target/linux/brcm47xx/patches-4.9/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch b/target/linux/brcm47xx/patches-4.9/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch deleted file mode 100644 index d771081dd0..0000000000 --- a/target/linux/brcm47xx/patches-4.9/320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch +++ /dev/null @@ -1,185 +0,0 @@ ---- a/arch/mips/bcm47xx/board.c -+++ b/arch/mips/bcm47xx/board.c -@@ -140,6 +140,7 @@ struct bcm47xx_board_type_list2 bcm47xx_ - {{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"}, - {{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"}, - {{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"}, -+ {{BCM47XX_BOARD_LINKSYS_WRT320N_V1, "Linksys WRT320N V1"}, "WRT320N", "1.0"}, - {{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"}, - {{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"}, - {{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"}, -@@ -159,9 +160,12 @@ struct bcm47xx_board_type_list1 bcm47xx_ - {{BCM47XX_BOARD_LUXUL_XVW_P30_V1, "Luxul XVW-P30 V1"}, "luxul_xvwp30_v1"}, - {{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"}, - {{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"}, -+ {{BCM47XX_BOARD_NETGEAR_R6300_V1, "Netgear R6300 V1"}, "U12H218T00_NETGEAR"}, - {{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"}, - {{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"}, - {{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"}, -+ {{BCM47XX_BOARD_NETGEAR_WN2500RP_V1, "Netgear WN2500RP V1"}, "U12H197T00_NETGEAR"}, -+ {{BCM47XX_BOARD_NETGEAR_WN2500RP_V2, "Netgear WN2500RP V2"}, "U12H294T00_NETGEAR"}, - {{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"}, - {{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"}, - {{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"}, ---- a/arch/mips/bcm47xx/buttons.c -+++ b/arch/mips/bcm47xx/buttons.c -@@ -26,6 +26,12 @@ - /* Asus */ - - static const struct gpio_keys_button -+bcm47xx_buttons_asus_rtn10u[] __initconst = { -+ BCM47XX_GPIO_KEY(20, KEY_WPS_BUTTON), -+ BCM47XX_GPIO_KEY(21, KEY_RESTART), -+}; -+ -+static const struct gpio_keys_button - bcm47xx_buttons_asus_rtn12[] __initconst = { - BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON), - BCM47XX_GPIO_KEY(1, KEY_RESTART), -@@ -276,6 +282,18 @@ bcm47xx_buttons_linksys_wrt310nv1[] __in - }; - - static const struct gpio_keys_button -+bcm47xx_buttons_linksys_wrt310n_v2[] __initconst = { -+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON), -+ BCM47XX_GPIO_KEY(6, KEY_RESTART), -+}; -+ -+static const struct gpio_keys_button -+bcm47xx_buttons_linksys_wrt320n_v1[] __initconst = { -+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON), -+ BCM47XX_GPIO_KEY(8, KEY_RESTART), -+}; -+ -+static const struct gpio_keys_button - bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = { - BCM47XX_GPIO_KEY(5, KEY_WIMAX), - BCM47XX_GPIO_KEY(6, KEY_RESTART), -@@ -384,6 +402,17 @@ bcm47xx_buttons_motorola_wr850gv2v3[] __ - /* Netgear */ - - static const struct gpio_keys_button -+bcm47xx_buttons_netgear_r6300_v1[] __initconst = { -+ BCM47XX_GPIO_KEY(6, KEY_RESTART), -+}; -+ -+static const struct gpio_keys_button -+bcm47xx_buttons_netgear_wn2500rp_v1[] __initconst = { -+ BCM47XX_GPIO_KEY(12, KEY_RESTART), -+ BCM47XX_GPIO_KEY(31, KEY_WPS_BUTTON), -+}; -+ -+static const struct gpio_keys_button - bcm47xx_buttons_netgear_wndr3400v1[] __initconst = { - BCM47XX_GPIO_KEY(4, KEY_RESTART), - BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON), -@@ -470,6 +499,9 @@ int __init bcm47xx_buttons_register(void - int err; - - switch (board) { -+ case BCM47XX_BOARD_ASUS_RTN10U: -+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn10u); -+ break; - case BCM47XX_BOARD_ASUS_RTN12: - err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12); - break; -@@ -600,6 +632,12 @@ int __init bcm47xx_buttons_register(void - case BCM47XX_BOARD_LINKSYS_WRT310NV1: - err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1); - break; -+ case BCM47XX_BOARD_LINKSYS_WRT310NV2: -+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310n_v2); -+ break; -+ case BCM47XX_BOARD_LINKSYS_WRT320N_V1: -+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt320n_v1); -+ break; - case BCM47XX_BOARD_LINKSYS_WRT54G3GV2: - err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2); - break; -@@ -663,6 +701,12 @@ int __init bcm47xx_buttons_register(void - err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gv2v3); - break; - -+ case BCM47XX_BOARD_NETGEAR_R6300_V1: -+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6300_v1); -+ break; -+ case BCM47XX_BOARD_NETGEAR_WN2500RP_V1: -+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wn2500rp_v1); -+ break; - case BCM47XX_BOARD_NETGEAR_WNDR3400V1: - err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1); - break; ---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h -+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h -@@ -71,6 +71,7 @@ enum bcm47xx_board { - BCM47XX_BOARD_LINKSYS_WRT300NV11, - BCM47XX_BOARD_LINKSYS_WRT310NV1, - BCM47XX_BOARD_LINKSYS_WRT310NV2, -+ BCM47XX_BOARD_LINKSYS_WRT320N_V1, - BCM47XX_BOARD_LINKSYS_WRT54G3GV2, - BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101, - BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467, -@@ -97,9 +98,12 @@ enum bcm47xx_board { - BCM47XX_BOARD_MOTOROLA_WR850GP, - BCM47XX_BOARD_MOTOROLA_WR850GV2V3, - -+ BCM47XX_BOARD_NETGEAR_R6300_V1, - BCM47XX_BOARD_NETGEAR_WGR614V8, - BCM47XX_BOARD_NETGEAR_WGR614V9, - BCM47XX_BOARD_NETGEAR_WGR614_V10, -+ BCM47XX_BOARD_NETGEAR_WN2500RP_V1, -+ BCM47XX_BOARD_NETGEAR_WN2500RP_V2, - BCM47XX_BOARD_NETGEAR_WNDR3300, - BCM47XX_BOARD_NETGEAR_WNDR3400V1, - BCM47XX_BOARD_NETGEAR_WNDR3400V2, ---- a/arch/mips/bcm47xx/leds.c -+++ b/arch/mips/bcm47xx/leds.c -@@ -29,6 +29,14 @@ - /* Asus */ - - static const struct gpio_led -+bcm47xx_leds_asus_rtn10u[] __initconst = { -+ BCM47XX_GPIO_LED(5, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF), -+ BCM47XX_GPIO_LED(6, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON), -+ BCM47XX_GPIO_LED(7, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF), -+ BCM47XX_GPIO_LED(8, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF), -+}; -+ -+static const struct gpio_led - bcm47xx_leds_asus_rtn12[] __initconst = { - BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), - BCM47XX_GPIO_LED(7, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF), -@@ -313,6 +321,13 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc - }; - - static const struct gpio_led -+bcm47xx_leds_linksys_wrt320n_v1[] __initconst = { -+ BCM47XX_GPIO_LED(1, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), -+ BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON), -+ BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), -+}; -+ -+static const struct gpio_led - bcm47xx_leds_linksys_wrt54g_generic[] __initconst = { - BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF), - BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON), -@@ -555,6 +570,9 @@ void __init bcm47xx_leds_register(void) - enum bcm47xx_board board = bcm47xx_board_get(); - - switch (board) { -+ case BCM47XX_BOARD_ASUS_RTN10U: -+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn10u); -+ break; - case BCM47XX_BOARD_ASUS_RTN12: - bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12); - break; -@@ -688,6 +706,9 @@ void __init bcm47xx_leds_register(void) - case BCM47XX_BOARD_LINKSYS_WRT310NV1: - bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1); - break; -+ case BCM47XX_BOARD_LINKSYS_WRT320N_V1: -+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt320n_v1); -+ break; - case BCM47XX_BOARD_LINKSYS_WRT54G3GV2: - bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2); - break; diff --git a/target/linux/brcm47xx/patches-4.9/400-mtd-bcm47xxpart-get-nvram.patch b/target/linux/brcm47xx/patches-4.9/400-mtd-bcm47xxpart-get-nvram.patch deleted file mode 100644 index 58d8500b05..0000000000 --- a/target/linux/brcm47xx/patches-4.9/400-mtd-bcm47xxpart-get-nvram.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/drivers/mtd/bcm47xxpart.c -+++ b/drivers/mtd/bcm47xxpart.c -@@ -103,6 +103,7 @@ static int bcm47xxpart_parse(struct mtd_ - int trx_num = 0; /* Number of found TRX partitions */ - int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, }; - int err; -+ bool found_nvram = false; - - /* - * Some really old flashes (like AT45DB*) had smaller erasesize-s, but -@@ -284,12 +285,23 @@ static int bcm47xxpart_parse(struct mtd_ - if (buf[0] == NVRAM_HEADER) { - bcm47xxpart_add_part(&parts[curr_part++], "nvram", - master->size - blocksize, 0); -+ found_nvram = true; - break; - } - } - - kfree(buf); - -+ if (!found_nvram) { -+ pr_err("can not find a nvram partition reserve last block\n"); -+ bcm47xxpart_add_part(&parts[curr_part++], "nvram_guess", -+ master->size - blocksize * 2, MTD_WRITEABLE); -+ for (i = 0; i < curr_part; i++) { -+ if (parts[i].size + parts[i].offset == master->size) -+ parts[i].offset -= blocksize * 2; -+ } -+ } -+ - /* - * Assume that partitions end at the beginning of the one they are - * followed by. diff --git a/target/linux/brcm47xx/patches-4.9/610-pci_ide_fix.patch b/target/linux/brcm47xx/patches-4.9/610-pci_ide_fix.patch deleted file mode 100644 index c5a51add95..0000000000 --- a/target/linux/brcm47xx/patches-4.9/610-pci_ide_fix.patch +++ /dev/null @@ -1,41 +0,0 @@ -From: b.sander -Subject: [PATCH] pci: IDE fix - -These are standard probing messages when using pdc202xx_old: -pdc202xx_old 0000:00:01.0: IDE controller (0x105a:0x0d30 rev 0x02) -PCI: Enabling device 0000:00:01.0 (0004 -> 0007) -PCI: Fixing up device 0000:00:01.0 -0000:00:01.0: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode. -0000:00:01.0: FORCING BURST BIT 0x00->0x01 ACTIVE -pdc202xx_old 0000:00:01.0: 100% native mode on irq 6 - -With the default MAX_HWIFS value after above we get: - ide2: BM-DMA at 0x0400-0x0407 - ide3: BM-DMA at 0x0408-0x040f -Probing IDE interface ide2... -hde: CF500, CFA DISK drive - -As you can see it's ide2 + ide3 and hde. - -With this patch applied we get: - ide0: BM-DMA at 0x0400-0x0407 - ide1: BM-DMA at 0x0408-0x040f -Probing IDE interface ide0... -hda: CF500, CFA DISK drive - -This fixes OpenWrt ticket #7061: https://dev.openwrt.org/ticket/7061 ---- ---- a/include/linux/ide.h -+++ b/include/linux/ide.h -@@ -204,7 +204,11 @@ static inline void ide_std_init_ports(st - hw->io_ports.ctl_addr = ctl_addr; - } - -+#if defined CONFIG_BCM47XX -+# define MAX_HWIFS 2 -+#else - #define MAX_HWIFS 10 -+#endif - - /* - * Now for the data we need to maintain per-drive: ide_drive_t diff --git a/target/linux/brcm47xx/patches-4.9/791-tg3-no-pci-sleep.patch b/target/linux/brcm47xx/patches-4.9/791-tg3-no-pci-sleep.patch deleted file mode 100644 index 584cb40702..0000000000 --- a/target/linux/brcm47xx/patches-4.9/791-tg3-no-pci-sleep.patch +++ /dev/null @@ -1,17 +0,0 @@ -When the Ethernet controller is powered down and someone wants to -access the mdio bus like the witch driver (b53) the system crashed if -PCI_D3hot was set before. This patch deactivates this power sawing mode -when a switch driver is in use. - ---- a/drivers/net/ethernet/broadcom/tg3.c -+++ b/drivers/net/ethernet/broadcom/tg3.c -@@ -4261,7 +4261,8 @@ static int tg3_power_down_prepare(struct - static void tg3_power_down(struct tg3 *tp) - { - pci_wake_from_d3(tp->pdev, tg3_flag(tp, WOL_ENABLE)); -- pci_set_power_state(tp->pdev, PCI_D3hot); -+ if (!tg3_flag(tp, ROBOSWITCH)) -+ pci_set_power_state(tp->pdev, PCI_D3hot); - } - - static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8 *duplex) diff --git a/target/linux/brcm47xx/patches-4.9/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch b/target/linux/brcm47xx/patches-4.9/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch deleted file mode 100644 index 318dc55810..0000000000 --- a/target/linux/brcm47xx/patches-4.9/800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch +++ /dev/null @@ -1,73 +0,0 @@ -From 597715c61ae75a05ab3310a34ff3857a006f0f63 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Thu, 20 Nov 2014 21:32:42 +0100 -Subject: [PATCH] bcma: add table of serial flashes with smaller blocks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki ---- - drivers/bcma/driver_chipcommon_sflash.c | 29 +++++++++++++++++++++++++++++ - 1 file changed, 29 insertions(+) - ---- a/drivers/bcma/driver_chipcommon_sflash.c -+++ b/drivers/bcma/driver_chipcommon_sflash.c -@@ -9,6 +9,7 @@ - - #include - #include -+#include - - static struct resource bcma_sflash_resource = { - .name = "bcma_sflash", -@@ -42,6 +43,13 @@ static const struct bcma_sflash_tbl_e bc - { NULL }, - }; - -+/* Some devices use smaller blocks (and have more of them) */ -+static const struct bcma_sflash_tbl_e bcma_sflash_st_shrink_tbl[] = { -+ { "M25P16", 0x14, 0x1000, 512, }, -+ { "M25P32", 0x15, 0x1000, 1024, }, -+ { NULL }, -+}; -+ - static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = { - { "SST25WF512", 1, 0x1000, 16, }, - { "SST25VF512", 0x48, 0x1000, 16, }, -@@ -85,6 +93,24 @@ static void bcma_sflash_cmd(struct bcma_ - bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n"); - } - -+const struct bcma_sflash_tbl_e *bcma_sflash_shrink_flash(u32 id) -+{ -+ enum bcm47xx_board board = bcm47xx_board_get(); -+ const struct bcma_sflash_tbl_e *e; -+ -+ switch (board) { -+ case BCM47XX_BOARD_NETGEAR_WGR614_V10: -+ case BCM47XX_BOARD_NETGEAR_WNR1000_V3: -+ for (e = bcma_sflash_st_shrink_tbl; e->name; e++) { -+ if (e->id == id) -+ return e; -+ } -+ return NULL; -+ default: -+ return NULL; -+ } -+} -+ - /* Initialize serial flash access */ - int bcma_sflash_init(struct bcma_drv_cc *cc) - { -@@ -115,6 +141,10 @@ int bcma_sflash_init(struct bcma_drv_cc - case 0x13: - return -ENOTSUPP; - default: -+ e = bcma_sflash_shrink_flash(id); -+ if (e) -+ break; -+ - for (e = bcma_sflash_st_tbl; e->name; e++) { - if (e->id == id) - break; diff --git a/target/linux/brcm47xx/patches-4.9/820-wgt634u-nvram-fix.patch b/target/linux/brcm47xx/patches-4.9/820-wgt634u-nvram-fix.patch deleted file mode 100644 index 5c32211571..0000000000 --- a/target/linux/brcm47xx/patches-4.9/820-wgt634u-nvram-fix.patch +++ /dev/null @@ -1,304 +0,0 @@ -The Netgear wgt634u uses a different format for storing the -configuration. This patch is needed to read out the correct -configuration. The cfe_env.c file uses a different method way to read -out the configuration than the in kernel cfe config reader. - ---- a/drivers/firmware/broadcom/Makefile -+++ b/drivers/firmware/broadcom/Makefile -@@ -1,2 +1,2 @@ --obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o -+obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o cfe_env.o - obj-$(CONFIG_BCM47XX_SPROM) += bcm47xx_sprom.o ---- /dev/null -+++ b/drivers/firmware/broadcom/cfe_env.c -@@ -0,0 +1,228 @@ -+/* -+ * CFE environment variable access -+ * -+ * Copyright 2001-2003, Broadcom Corporation -+ * Copyright 2006, Felix Fietkau -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define NVRAM_SIZE (0x1ff0) -+static char _nvdata[NVRAM_SIZE]; -+static char _valuestr[256]; -+ -+/* -+ * TLV types. These codes are used in the "type-length-value" -+ * encoding of the items stored in the NVRAM device (flash or EEPROM) -+ * -+ * The layout of the flash/nvram is as follows: -+ * -+ * -+ * -+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list. -+ * The "length" field marks the length of the data section, not -+ * including the type and length fields. -+ * -+ * Environment variables are stored as follows: -+ * -+ * = -+ * -+ * If bit 0 (low bit) is set, the length is an 8-bit value. -+ * If bit 0 (low bit) is clear, the length is a 16-bit value -+ * -+ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still -+ * indicates the size of the length field. -+ * -+ * Flags are from the constants below: -+ * -+ */ -+#define ENV_LENGTH_16BITS 0x00 /* for low bit */ -+#define ENV_LENGTH_8BITS 0x01 -+ -+#define ENV_TYPE_USER 0x80 -+ -+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l)) -+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER) -+ -+/* -+ * The actual TLV types we support -+ */ -+ -+#define ENV_TLV_TYPE_END 0x00 -+#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS) -+ -+/* -+ * Environment variable flags -+ */ -+ -+#define ENV_FLG_NORMAL 0x00 /* normal read/write */ -+#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */ -+#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */ -+ -+#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */ -+#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */ -+ -+ -+/* ********************************************************************* -+ * _nvram_read(buffer,offset,length) -+ * -+ * Read data from the NVRAM device -+ * -+ * Input parameters: -+ * buffer - destination buffer -+ * offset - offset of data to read -+ * length - number of bytes to read -+ * -+ * Return value: -+ * number of bytes read, or <0 if error occured -+ ********************************************************************* */ -+static int -+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length) -+{ -+ int i; -+ if (offset > NVRAM_SIZE) -+ return -1; -+ -+ for ( i = 0; i < length; i++) { -+ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i]; -+ } -+ return length; -+} -+ -+ -+static char* -+_strnchr(const char *dest,int c,size_t cnt) -+{ -+ while (*dest && (cnt > 0)) { -+ if (*dest == c) return (char *) dest; -+ dest++; -+ cnt--; -+ } -+ return NULL; -+} -+ -+ -+ -+/* -+ * Core support API: Externally visible. -+ */ -+ -+/* -+ * Get the value of an NVRAM variable -+ * @param name name of variable to get -+ * @return value of variable or NULL if undefined -+ */ -+ -+char *cfe_env_get(unsigned char *nv_buf, const char *name) -+{ -+ int size; -+ unsigned char *buffer; -+ unsigned char *ptr; -+ unsigned char *envval; -+ unsigned int reclen; -+ unsigned int rectype; -+ int offset; -+ int flg; -+ -+ if (!strcmp(name, "nvram_type")) -+ return "cfe"; -+ -+ size = NVRAM_SIZE; -+ buffer = &_nvdata[0]; -+ -+ ptr = buffer; -+ offset = 0; -+ -+ /* Read the record type and length */ -+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { -+ goto error; -+ } -+ -+ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) { -+ -+ /* Adjust pointer for TLV type */ -+ rectype = *(ptr); -+ offset++; -+ size--; -+ -+ /* -+ * Read the length. It can be either 1 or 2 bytes -+ * depending on the code -+ */ -+ if (rectype & ENV_LENGTH_8BITS) { -+ /* Read the record type and length - 8 bits */ -+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { -+ goto error; -+ } -+ reclen = *(ptr); -+ size--; -+ offset++; -+ } -+ else { -+ /* Read the record type and length - 16 bits, MSB first */ -+ if (_nvram_read(nv_buf, ptr,offset,2) != 2) { -+ goto error; -+ } -+ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1); -+ size -= 2; -+ offset += 2; -+ } -+ -+ if (reclen > size) -+ break; /* should not happen, bad NVRAM */ -+ -+ switch (rectype) { -+ case ENV_TLV_TYPE_ENV: -+ /* Read the TLV data */ -+ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen) -+ goto error; -+ flg = *ptr++; -+ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1)); -+ if (envval) { -+ *envval++ = '\0'; -+ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr)); -+ _valuestr[(reclen-1)-(envval-ptr)] = '\0'; -+#if 0 -+ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr); -+#endif -+ if(!strcmp(ptr, name)){ -+ return _valuestr; -+ } -+ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name)) -+ return _valuestr; -+ } -+ break; -+ -+ default: -+ /* Unknown TLV type, skip it. */ -+ break; -+ } -+ -+ /* -+ * Advance to next TLV -+ */ -+ -+ size -= (int)reclen; -+ offset += reclen; -+ -+ /* Read the next record type */ -+ ptr = buffer; -+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) -+ goto error; -+ } -+ -+error: -+ return NULL; -+ -+} -+ ---- a/drivers/firmware/broadcom/bcm47xx_nvram.c -+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c -@@ -37,6 +37,8 @@ struct nvram_header { - static char nvram_buf[NVRAM_SPACE]; - static size_t nvram_len; - static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000}; -+static int cfe_env; -+extern char *cfe_env_get(char *nv_buf, const char *name); - - static u32 find_nvram_size(void __iomem *end) - { -@@ -56,7 +58,9 @@ static u32 find_nvram_size(void __iomem - static int nvram_find_and_copy(void __iomem *iobase, u32 lim) - { - struct nvram_header __iomem *header; -+ int i; - u32 off; -+ u32 *src, *dst; - u32 size; - - if (nvram_len) { -@@ -64,6 +68,26 @@ static int nvram_find_and_copy(void __io - return -EEXIST; - } - -+ cfe_env = 0; -+ -+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */ -+ if (lim >= 8 * 1024 * 1024) { -+ src = (u32 *)(iobase + 8 * 1024 * 1024 - 0x2000); -+ dst = (u32 *)nvram_buf; -+ -+ if ((*src & 0xff00ff) == 0x000001) { -+ printk("early_nvram_init: WGT634U NVRAM found.\n"); -+ -+ for (i = 0; i < 0x1ff0; i++) { -+ if (*src == 0xFFFFFFFF) -+ break; -+ *dst++ = *src++; -+ } -+ cfe_env = 1; -+ return 0; -+ } -+ } -+ - /* TODO: when nvram is on nand flash check for bad blocks first. */ - off = FLASH_MIN; - while (off <= lim) { -@@ -174,6 +198,13 @@ int bcm47xx_nvram_getenv(const char *nam - if (!name) - return -EINVAL; - -+ if (cfe_env) { -+ value = cfe_env_get(nvram_buf, name); -+ if (!value) -+ return -ENOENT; -+ return snprintf(val, val_len, "%s", value); -+ } -+ - if (!nvram_len) { - err = nvram_init(); - if (err) diff --git a/target/linux/brcm47xx/patches-4.9/830-huawei_e970_support.patch b/target/linux/brcm47xx/patches-4.9/830-huawei_e970_support.patch deleted file mode 100644 index b6150ed8fd..0000000000 --- a/target/linux/brcm47xx/patches-4.9/830-huawei_e970_support.patch +++ /dev/null @@ -1,101 +0,0 @@ ---- a/arch/mips/bcm47xx/setup.c -+++ b/arch/mips/bcm47xx/setup.c -@@ -37,6 +37,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -225,6 +226,33 @@ static struct fixed_phy_status bcm47xx_f - .duplex = DUPLEX_FULL, - }; - -+static struct gpio_wdt_platform_data gpio_wdt_data; -+ -+static struct platform_device gpio_wdt_device = { -+ .name = "gpio-wdt", -+ .id = 0, -+ .dev = { -+ .platform_data = &gpio_wdt_data, -+ }, -+}; -+ -+static int __init bcm47xx_register_gpio_watchdog(void) -+{ -+ enum bcm47xx_board board = bcm47xx_board_get(); -+ -+ switch (board) { -+ case BCM47XX_BOARD_HUAWEI_E970: -+ pr_info("bcm47xx: detected Huawei E970 or similar, starting early gpio_wdt timer\n"); -+ gpio_wdt_data.gpio = 7; -+ gpio_wdt_data.interval = HZ; -+ gpio_wdt_data.first_interval = HZ / 5; -+ return platform_device_register(&gpio_wdt_device); -+ default: -+ /* Nothing to do */ -+ return 0; -+ } -+} -+ - static int __init bcm47xx_register_bus_complete(void) - { - switch (bcm47xx_bus_type) { -@@ -244,6 +272,7 @@ static int __init bcm47xx_register_bus_c - bcm47xx_workarounds(); - - fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status, -1); -+ bcm47xx_register_gpio_watchdog(); - return 0; - } - device_initcall(bcm47xx_register_bus_complete); ---- a/arch/mips/configs/bcm47xx_defconfig -+++ b/arch/mips/configs/bcm47xx_defconfig -@@ -66,6 +66,7 @@ CONFIG_HW_RANDOM=y - CONFIG_GPIO_SYSFS=y - CONFIG_WATCHDOG=y - CONFIG_BCM47XX_WDT=y -+CONFIG_GPIO_WDT=y - CONFIG_SSB_DEBUG=y - CONFIG_SSB_DRIVER_GIGE=y - CONFIG_BCMA_DRIVER_GMAC_CMN=y ---- a/drivers/ssb/embedded.c -+++ b/drivers/ssb/embedded.c -@@ -34,11 +34,36 @@ int ssb_watchdog_timer_set(struct ssb_bu - } - EXPORT_SYMBOL(ssb_watchdog_timer_set); - -+#ifdef CONFIG_BCM47XX -+#include -+ -+static bool ssb_watchdog_supported(void) -+{ -+ enum bcm47xx_board board = bcm47xx_board_get(); -+ -+ /* The Huawei E970 has a hardware watchdog using a GPIO */ -+ switch (board) { -+ case BCM47XX_BOARD_HUAWEI_E970: -+ return false; -+ default: -+ return true; -+ } -+} -+#else -+static bool ssb_watchdog_supported(void) -+{ -+ return true; -+} -+#endif -+ - int ssb_watchdog_register(struct ssb_bus *bus) - { - struct bcm47xx_wdt wdt = {}; - struct platform_device *pdev; - -+ if (!ssb_watchdog_supported()) -+ return 0; -+ - if (ssb_chipco_available(&bus->chipco)) { - wdt.driver_data = &bus->chipco; - wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt; diff --git a/target/linux/brcm47xx/patches-4.9/831-old_gpio_wdt.patch b/target/linux/brcm47xx/patches-4.9/831-old_gpio_wdt.patch deleted file mode 100644 index 3eb67dfd64..0000000000 --- a/target/linux/brcm47xx/patches-4.9/831-old_gpio_wdt.patch +++ /dev/null @@ -1,360 +0,0 @@ -This generic GPIO watchdog is used on Huawei E970 (brcm47xx) - -Signed-off-by: Mathias Adam - ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -1389,6 +1389,15 @@ config WDT_MTX1 - Hardware driver for the MTX-1 boards. This is a watchdog timer that - will reboot the machine after a 100 seconds timer expired. - -+config GPIO_WDT -+ tristate "GPIO Hardware Watchdog" -+ help -+ Hardware driver for GPIO-controlled watchdogs. GPIO pin and -+ toggle interval settings are platform-specific. The driver -+ will stop toggling the GPIO (i.e. machine reboots) after a -+ 100 second timer expired and no process has written to -+ /dev/watchdog during that time. -+ - config PNX833X_WDT - tristate "PNX833x Hardware Watchdog" - depends on SOC_PNX8335 ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -156,6 +156,7 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt - obj-$(CONFIG_INDYDOG) += indydog.o - obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o - obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o -+obj-$(CONFIG_GPIO_WDT) += old_gpio_wdt.o - obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o ---- /dev/null -+++ b/drivers/watchdog/old_gpio_wdt.c -@@ -0,0 +1,301 @@ -+/* -+ * Driver for GPIO-controlled Hardware Watchdogs. -+ * -+ * Copyright (C) 2013 Mathias Adam -+ * -+ * Replaces mtx1_wdt (driver for the MTX-1 Watchdog): -+ * -+ * (C) Copyright 2005 4G Systems , -+ * All Rights Reserved. -+ * http://www.4g-systems.biz -+ * -+ * (C) Copyright 2007 OpenWrt.org, Florian Fainelli -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ * -+ * Neither Michael Stickel nor 4G Systems admit liability nor provide -+ * warranty for any of this software. This material is provided -+ * "AS-IS" and at no charge. -+ * -+ * (c) Copyright 2005 4G Systems -+ * -+ * Release 0.01. -+ * Author: Michael Stickel michael.stickel@4g-systems.biz -+ * -+ * Release 0.02. -+ * Author: Florian Fainelli florian@openwrt.org -+ * use the Linux watchdog/timer APIs -+ * -+ * Release 0.03. -+ * Author: Mathias Adam -+ * make it a generic gpio watchdog driver -+ * -+ * The Watchdog is configured to reset the MTX-1 -+ * if it is not triggered for 100 seconds. -+ * It should not be triggered more often than 1.6 seconds. -+ * -+ * A timer triggers the watchdog every 5 seconds, until -+ * it is opened for the first time. After the first open -+ * it MUST be triggered every 2..95 seconds. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static int ticks = 100 * HZ; -+ -+static struct { -+ struct completion stop; -+ spinlock_t lock; -+ int running; -+ struct timer_list timer; -+ int queue; -+ int default_ticks; -+ unsigned long inuse; -+ unsigned gpio; -+ unsigned int gstate; -+ int interval; -+ int first_interval; -+} gpio_wdt_device; -+ -+static void gpio_wdt_trigger(unsigned long unused) -+{ -+ spin_lock(&gpio_wdt_device.lock); -+ if (gpio_wdt_device.running && ticks > 0) -+ ticks -= gpio_wdt_device.interval; -+ -+ /* toggle wdt gpio */ -+ gpio_wdt_device.gstate = !gpio_wdt_device.gstate; -+ gpio_set_value(gpio_wdt_device.gpio, gpio_wdt_device.gstate); -+ -+ if (gpio_wdt_device.queue && ticks > 0) -+ mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.interval); -+ else -+ complete(&gpio_wdt_device.stop); -+ spin_unlock(&gpio_wdt_device.lock); -+} -+ -+static void gpio_wdt_reset(void) -+{ -+ ticks = gpio_wdt_device.default_ticks; -+} -+ -+ -+static void gpio_wdt_start(void) -+{ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&gpio_wdt_device.lock, flags); -+ if (!gpio_wdt_device.queue) { -+ gpio_wdt_device.queue = 1; -+ gpio_wdt_device.gstate = 1; -+ gpio_set_value(gpio_wdt_device.gpio, 1); -+ mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.first_interval); -+ } -+ gpio_wdt_device.running++; -+ spin_unlock_irqrestore(&gpio_wdt_device.lock, flags); -+} -+ -+static int gpio_wdt_stop(void) -+{ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&gpio_wdt_device.lock, flags); -+ if (gpio_wdt_device.queue) { -+ gpio_wdt_device.queue = 0; -+ gpio_wdt_device.gstate = 0; -+ gpio_set_value(gpio_wdt_device.gpio, 0); -+ } -+ ticks = gpio_wdt_device.default_ticks; -+ spin_unlock_irqrestore(&gpio_wdt_device.lock, flags); -+ return 0; -+} -+ -+/* Filesystem functions */ -+ -+static int gpio_wdt_open(struct inode *inode, struct file *file) -+{ -+ if (test_and_set_bit(0, &gpio_wdt_device.inuse)) -+ return -EBUSY; -+ return nonseekable_open(inode, file); -+} -+ -+ -+static int gpio_wdt_release(struct inode *inode, struct file *file) -+{ -+ clear_bit(0, &gpio_wdt_device.inuse); -+ return 0; -+} -+ -+static long gpio_wdt_ioctl(struct file *file, unsigned int cmd, -+ unsigned long arg) -+{ -+ void __user *argp = (void __user *)arg; -+ int __user *p = (int __user *)argp; -+ unsigned int value; -+ static const struct watchdog_info ident = { -+ .options = WDIOF_CARDRESET, -+ .identity = "GPIO WDT", -+ }; -+ -+ switch (cmd) { -+ case WDIOC_GETSUPPORT: -+ if (copy_to_user(argp, &ident, sizeof(ident))) -+ return -EFAULT; -+ break; -+ case WDIOC_GETSTATUS: -+ case WDIOC_GETBOOTSTATUS: -+ put_user(0, p); -+ break; -+ case WDIOC_SETOPTIONS: -+ if (get_user(value, p)) -+ return -EFAULT; -+ if (value & WDIOS_ENABLECARD) -+ gpio_wdt_start(); -+ else if (value & WDIOS_DISABLECARD) -+ gpio_wdt_stop(); -+ else -+ return -EINVAL; -+ return 0; -+ case WDIOC_KEEPALIVE: -+ gpio_wdt_reset(); -+ break; -+ default: -+ return -ENOTTY; -+ } -+ return 0; -+} -+ -+ -+static ssize_t gpio_wdt_write(struct file *file, const char *buf, -+ size_t count, loff_t *ppos) -+{ -+ if (!count) -+ return -EIO; -+ gpio_wdt_reset(); -+ return count; -+} -+ -+static const struct file_operations gpio_wdt_fops = { -+ .owner = THIS_MODULE, -+ .llseek = no_llseek, -+ .unlocked_ioctl = gpio_wdt_ioctl, -+ .open = gpio_wdt_open, -+ .write = gpio_wdt_write, -+ .release = gpio_wdt_release, -+}; -+ -+ -+static struct miscdevice gpio_wdt_misc = { -+ .minor = WATCHDOG_MINOR, -+ .name = "watchdog", -+ .fops = &gpio_wdt_fops, -+}; -+ -+ -+static int gpio_wdt_probe(struct platform_device *pdev) -+{ -+ int ret; -+ struct gpio_wdt_platform_data *gpio_wdt_data = pdev->dev.platform_data; -+ -+ gpio_wdt_device.gpio = gpio_wdt_data->gpio; -+ gpio_wdt_device.interval = gpio_wdt_data->interval; -+ gpio_wdt_device.first_interval = gpio_wdt_data->first_interval; -+ if (gpio_wdt_device.first_interval <= 0) { -+ gpio_wdt_device.first_interval = gpio_wdt_device.interval; -+ } -+ -+ ret = gpio_request(gpio_wdt_device.gpio, "gpio-wdt"); -+ if (ret < 0) { -+ dev_err(&pdev->dev, "failed to request gpio"); -+ return ret; -+ } -+ -+ spin_lock_init(&gpio_wdt_device.lock); -+ init_completion(&gpio_wdt_device.stop); -+ gpio_wdt_device.queue = 0; -+ clear_bit(0, &gpio_wdt_device.inuse); -+ setup_timer(&gpio_wdt_device.timer, gpio_wdt_trigger, 0L); -+ gpio_wdt_device.default_ticks = ticks; -+ -+ gpio_wdt_start(); -+ dev_info(&pdev->dev, "GPIO Hardware Watchdog driver (gpio=%i interval=%i/%i)\n", -+ gpio_wdt_data->gpio, gpio_wdt_data->first_interval, gpio_wdt_data->interval); -+ return 0; -+} -+ -+static int gpio_wdt_remove(struct platform_device *pdev) -+{ -+ /* FIXME: do we need to lock this test ? */ -+ if (gpio_wdt_device.queue) { -+ gpio_wdt_device.queue = 0; -+ wait_for_completion(&gpio_wdt_device.stop); -+ } -+ -+ gpio_free(gpio_wdt_device.gpio); -+ misc_deregister(&gpio_wdt_misc); -+ return 0; -+} -+ -+static struct platform_driver gpio_wdt_driver = { -+ .probe = gpio_wdt_probe, -+ .remove = gpio_wdt_remove, -+ .driver.name = "gpio-wdt", -+ .driver.owner = THIS_MODULE, -+}; -+ -+static int __init gpio_wdt_init(void) -+{ -+ return platform_driver_register(&gpio_wdt_driver); -+} -+arch_initcall(gpio_wdt_init); -+ -+/* -+ * We do wdt initialization in two steps: arch_initcall probes the wdt -+ * very early to start pinging the watchdog (misc devices are not yet -+ * available), and later module_init() just registers the misc device. -+ */ -+static int gpio_wdt_init_late(void) -+{ -+ int ret; -+ -+ ret = misc_register(&gpio_wdt_misc); -+ if (ret < 0) { -+ pr_err("GPIO_WDT: failed to register misc device\n"); -+ return ret; -+ } -+ return 0; -+} -+#ifndef MODULE -+module_init(gpio_wdt_init_late); -+#endif -+ -+static void __exit gpio_wdt_exit(void) -+{ -+ platform_driver_unregister(&gpio_wdt_driver); -+} -+module_exit(gpio_wdt_exit); -+ -+MODULE_AUTHOR("Michael Stickel, Florian Fainelli, Mathias Adam"); -+MODULE_DESCRIPTION("Driver for GPIO hardware watchdogs"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -+MODULE_ALIAS("platform:gpio-wdt"); ---- /dev/null -+++ b/include/linux/old_gpio_wdt.h -@@ -0,0 +1,21 @@ -+/* -+ * Definitions for the GPIO watchdog driver -+ * -+ * Copyright (C) 2013 Mathias Adam -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#ifndef _GPIO_WDT_H_ -+#define _GPIO_WDT_H_ -+ -+struct gpio_wdt_platform_data { -+ int gpio; /* GPIO line number */ -+ int interval; /* watchdog reset interval in system ticks */ -+ int first_interval; /* first wd reset interval in system ticks */ -+}; -+ -+#endif /* _GPIO_WDT_H_ */ diff --git a/target/linux/brcm47xx/patches-4.9/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch b/target/linux/brcm47xx/patches-4.9/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch deleted file mode 100644 index d7d2d7e59a..0000000000 --- a/target/linux/brcm47xx/patches-4.9/900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 5c81397a0147ea59c778d1de14ef54e2268221f6 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Wed, 8 Apr 2015 06:58:11 +0200 -Subject: [PATCH] ssb: reject PCI writes setting CardBus bridge resources -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -If SoC has a CardBus we can set resources of device at slot 1 only. It's -impossigle to set bridge resources as it simply overwrites device 1 -configuration and usually results in Data bus error-s. - -Signed-off-by: Rafał Miłecki ---- - drivers/ssb/driver_pcicore.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -164,6 +164,10 @@ static int ssb_extpci_write_config(struc - SSB_WARN_ON(!pc->hostmode); - if (unlikely(len != 1 && len != 2 && len != 4)) - goto out; -+ /* CardBus SoCs allow configuring dev 1 resources only */ -+ if (extpci_core->cardbusmode && dev != 1 && -+ off >= PCI_BASE_ADDRESS_0 && off <= PCI_BASE_ADDRESS_5) -+ goto out; - addr = get_cfgspace_addr(pc, bus, dev, func, off); - if (unlikely(!addr)) - goto out; diff --git a/target/linux/brcm47xx/patches-4.9/901-Revert-bcma-switch-GPIO-portions-to-use-GPIOLIB_IRQC.patch b/target/linux/brcm47xx/patches-4.9/901-Revert-bcma-switch-GPIO-portions-to-use-GPIOLIB_IRQC.patch deleted file mode 100644 index cbc7086468..0000000000 --- a/target/linux/brcm47xx/patches-4.9/901-Revert-bcma-switch-GPIO-portions-to-use-GPIOLIB_IRQC.patch +++ /dev/null @@ -1,233 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 18 Dec 2015 07:51:08 +0100 -Subject: [PATCH] Revert "bcma: switch GPIO portions to use GPIOLIB_IRQCHIP" -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This reverts commit 74f4e0cc61080f63f28e8d519bdf437957e64217. - -On BCM47XX (MIPS) bcma_bus_get_host_dev returns NULL which results in: -[ 0.157054] missing gpiochip .dev parent pointer -[ 0.157287] bcma: bus0: Error registering GPIO driver: -22 - -Signed-off-by: Rafał Miłecki ---- - drivers/bcma/Kconfig | 2 +- - drivers/bcma/driver_gpio.c | 92 +++++++++++++++++++---------- - include/linux/bcma/bcma_driver_chipcommon.h | 1 + - 3 files changed, 64 insertions(+), 31 deletions(-) - ---- a/drivers/bcma/Kconfig -+++ b/drivers/bcma/Kconfig -@@ -106,7 +106,7 @@ config BCMA_DRIVER_GMAC_CMN - config BCMA_DRIVER_GPIO - bool "BCMA GPIO driver" - depends on BCMA && GPIOLIB -- select GPIOLIB_IRQCHIP if BCMA_HOST_SOC -+ select IRQ_DOMAIN if BCMA_HOST_SOC - help - Driver to provide access to the GPIO pins of the bcma bus. - ---- a/drivers/bcma/driver_gpio.c -+++ b/drivers/bcma/driver_gpio.c -@@ -8,8 +8,10 @@ - * Licensed under the GNU/GPL. See COPYING for details. - */ - --#include -+#include -+#include - #include -+#include - #include - #include - -@@ -72,11 +74,19 @@ static void bcma_gpio_free(struct gpio_c - } - - #if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X) -+static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct bcma_drv_cc *cc = gpiochip_get_data(chip); -+ -+ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC) -+ return irq_find_mapping(cc->irq_domain, gpio); -+ else -+ return -EINVAL; -+} - - static void bcma_gpio_irq_unmask(struct irq_data *d) - { -- struct gpio_chip *gc = irq_data_get_irq_chip_data(d); -- struct bcma_drv_cc *cc = gpiochip_get_data(gc); -+ struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d); - int gpio = irqd_to_hwirq(d); - u32 val = bcma_chipco_gpio_in(cc, BIT(gpio)); - -@@ -86,8 +96,7 @@ static void bcma_gpio_irq_unmask(struct - - static void bcma_gpio_irq_mask(struct irq_data *d) - { -- struct gpio_chip *gc = irq_data_get_irq_chip_data(d); -- struct bcma_drv_cc *cc = gpiochip_get_data(gc); -+ struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d); - int gpio = irqd_to_hwirq(d); - - bcma_chipco_gpio_intmask(cc, BIT(gpio), 0); -@@ -102,7 +111,6 @@ static struct irq_chip bcma_gpio_irq_chi - static irqreturn_t bcma_gpio_irq_handler(int irq, void *dev_id) - { - struct bcma_drv_cc *cc = dev_id; -- struct gpio_chip *gc = &cc->gpio; - u32 val = bcma_cc_read32(cc, BCMA_CC_GPIOIN); - u32 mask = bcma_cc_read32(cc, BCMA_CC_GPIOIRQ); - u32 pol = bcma_cc_read32(cc, BCMA_CC_GPIOPOL); -@@ -112,58 +120,81 @@ static irqreturn_t bcma_gpio_irq_handler - if (!irqs) - return IRQ_NONE; - -- for_each_set_bit(gpio, &irqs, gc->ngpio) -- generic_handle_irq(irq_find_mapping(gc->irqdomain, gpio)); -+ for_each_set_bit(gpio, &irqs, cc->gpio.ngpio) -+ generic_handle_irq(bcma_gpio_to_irq(&cc->gpio, gpio)); - bcma_chipco_gpio_polarity(cc, irqs, val & irqs); - - return IRQ_HANDLED; - } - --static int bcma_gpio_irq_init(struct bcma_drv_cc *cc) -+static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc) - { - struct gpio_chip *chip = &cc->gpio; -- int hwirq, err; -+ int gpio, hwirq, err; - - if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC) - return 0; - -+ cc->irq_domain = irq_domain_add_linear(NULL, chip->ngpio, -+ &irq_domain_simple_ops, cc); -+ if (!cc->irq_domain) { -+ err = -ENODEV; -+ goto err_irq_domain; -+ } -+ for (gpio = 0; gpio < chip->ngpio; gpio++) { -+ int irq = irq_create_mapping(cc->irq_domain, gpio); -+ -+ irq_set_chip_data(irq, cc); -+ irq_set_chip_and_handler(irq, &bcma_gpio_irq_chip, -+ handle_simple_irq); -+ } -+ - hwirq = bcma_core_irq(cc->core, 0); - err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio", - cc); - if (err) -- return err; -+ goto err_req_irq; - - bcma_chipco_gpio_intmask(cc, ~0, 0); - bcma_cc_set32(cc, BCMA_CC_IRQMASK, BCMA_CC_IRQ_GPIO); - -- err = gpiochip_irqchip_add(chip, -- &bcma_gpio_irq_chip, -- 0, -- handle_simple_irq, -- IRQ_TYPE_NONE); -- if (err) { -- free_irq(hwirq, cc); -- return err; -- } -- - return 0; -+ -+err_req_irq: -+ for (gpio = 0; gpio < chip->ngpio; gpio++) { -+ int irq = irq_find_mapping(cc->irq_domain, gpio); -+ -+ irq_dispose_mapping(irq); -+ } -+ irq_domain_remove(cc->irq_domain); -+err_irq_domain: -+ return err; - } - --static void bcma_gpio_irq_exit(struct bcma_drv_cc *cc) -+static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc) - { -+ struct gpio_chip *chip = &cc->gpio; -+ int gpio; -+ - if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC) - return; - - bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO); - free_irq(bcma_core_irq(cc->core, 0), cc); -+ for (gpio = 0; gpio < chip->ngpio; gpio++) { -+ int irq = irq_find_mapping(cc->irq_domain, gpio); -+ -+ irq_dispose_mapping(irq); -+ } -+ irq_domain_remove(cc->irq_domain); - } - #else --static int bcma_gpio_irq_init(struct bcma_drv_cc *cc) -+static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc) - { - return 0; - } - --static void bcma_gpio_irq_exit(struct bcma_drv_cc *cc) -+static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc) - { - } - #endif -@@ -182,8 +213,9 @@ int bcma_gpio_init(struct bcma_drv_cc *c - chip->set = bcma_gpio_set_value; - chip->direction_input = bcma_gpio_direction_input; - chip->direction_output = bcma_gpio_direction_output; -- chip->owner = THIS_MODULE; -- chip->parent = bcma_bus_get_host_dev(bus); -+#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X) -+ chip->to_irq = bcma_gpio_to_irq; -+#endif - #if IS_BUILTIN(CONFIG_OF) - chip->of_node = cc->core->dev.of_node; - #endif -@@ -211,13 +243,13 @@ int bcma_gpio_init(struct bcma_drv_cc *c - else - chip->base = -1; - -- err = gpiochip_add_data(chip, cc); -+ err = bcma_gpio_irq_domain_init(cc); - if (err) - return err; - -- err = bcma_gpio_irq_init(cc); -+ err = gpiochip_add_data(chip, cc); - if (err) { -- gpiochip_remove(chip); -+ bcma_gpio_irq_domain_exit(cc); - return err; - } - -@@ -226,7 +258,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c - - int bcma_gpio_unregister(struct bcma_drv_cc *cc) - { -- bcma_gpio_irq_exit(cc); -+ bcma_gpio_irq_domain_exit(cc); - gpiochip_remove(&cc->gpio); - return 0; - } ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -644,6 +644,7 @@ struct bcma_drv_cc { - spinlock_t gpio_lock; - #ifdef CONFIG_BCMA_DRIVER_GPIO - struct gpio_chip gpio; -+ struct irq_domain *irq_domain; - #endif - }; - diff --git a/target/linux/brcm47xx/patches-4.9/940-bcm47xx-yenta.patch b/target/linux/brcm47xx/patches-4.9/940-bcm47xx-yenta.patch deleted file mode 100644 index 00a44d6317..0000000000 --- a/target/linux/brcm47xx/patches-4.9/940-bcm47xx-yenta.patch +++ /dev/null @@ -1,46 +0,0 @@ ---- a/drivers/pcmcia/yenta_socket.c -+++ b/drivers/pcmcia/yenta_socket.c -@@ -919,6 +919,8 @@ static unsigned int yenta_probe_irq(stru - * Probe for usable interrupts using the force - * register to generate bogus card status events. - */ -+#ifndef CONFIG_BCM47XX -+ /* WRT54G3G does not like this */ - cb_writel(socket, CB_SOCKET_EVENT, -1); - cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK); - reg = exca_readb(socket, I365_CSCINT); -@@ -934,6 +936,7 @@ static unsigned int yenta_probe_irq(stru - } - cb_writel(socket, CB_SOCKET_MASK, 0); - exca_writeb(socket, I365_CSCINT, reg); -+#endif - - mask = probe_irq_mask(val) & 0xffff; - -@@ -1018,6 +1021,10 @@ static void yenta_get_socket_capabilitie - else - socket->socket.irq_mask = 0; - -+ /* irq mask probing is broken for the WRT54G3G */ -+ if (socket->socket.irq_mask == 0) -+ socket->socket.irq_mask = 0x6f8; -+ - dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n", - socket->socket.irq_mask, socket->cb_irq); - } -@@ -1250,6 +1257,15 @@ static int yenta_probe(struct pci_dev *d - dev_info(&dev->dev, "Socket status: %08x\n", - cb_readl(socket, CB_SOCKET_STATE)); - -+ /* Generate an interrupt on card insert/remove */ -+ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK); -+ -+ /* Set up Multifunction Routing Status Register */ -+ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */); -+ -+ /* Switch interrupts to parallelized */ -+ config_writeb(socket, 0x92, 0x64); -+ - yenta_fixup_parent_bridge(dev->subordinate); - - /* Register it with the pcmcia layer.. */ diff --git a/target/linux/brcm47xx/patches-4.9/976-ssb_increase_pci_delay.patch b/target/linux/brcm47xx/patches-4.9/976-ssb_increase_pci_delay.patch deleted file mode 100644 index 90bda515eb..0000000000 --- a/target/linux/brcm47xx/patches-4.9/976-ssb_increase_pci_delay.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -389,7 +389,7 @@ static void ssb_pcicore_init_hostmode(st - set_io_port_base(ssb_pcicore_controller.io_map_base); - /* Give some time to the PCI controller to configure itself with the new - * values. Not waiting at this point causes crashes of the machine. */ -- mdelay(10); -+ mdelay(300); - register_pci_controller(&ssb_pcicore_controller); - } - diff --git a/target/linux/brcm47xx/patches-4.9/999-wl_exports.patch b/target/linux/brcm47xx/patches-4.9/999-wl_exports.patch deleted file mode 100644 index 957e5885a9..0000000000 --- a/target/linux/brcm47xx/patches-4.9/999-wl_exports.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/drivers/firmware/broadcom/bcm47xx_nvram.c -+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c -@@ -34,7 +34,8 @@ struct nvram_header { - u32 config_ncdl; /* ncdl values for memc */ - }; - --static char nvram_buf[NVRAM_SPACE]; -+char nvram_buf[NVRAM_SPACE]; -+EXPORT_SYMBOL(nvram_buf); - static size_t nvram_len; - static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000}; - static int cfe_env; ---- a/arch/mips/mm/cache.c -+++ b/arch/mips/mm/cache.c -@@ -63,6 +63,7 @@ void (*_dma_cache_wback)(unsigned long s - void (*_dma_cache_inv)(unsigned long start, unsigned long size); - - EXPORT_SYMBOL(_dma_cache_wback_inv); -+EXPORT_SYMBOL(_dma_cache_inv); - - #endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */ -