From: Mieczyslaw Nalewaj Date: Fri, 23 Feb 2024 19:53:37 +0000 (+0100) Subject: ramips: add support for TP-Link Archer C5 v4 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=fdd3a05c407d2d0793ec9434cd31197b15846f8d;p=openwrt%2Fstaging%2Fneocturne.git ramips: add support for TP-Link Archer C5 v4 TP-Link Archer C5 v4 is a dual band router with 5 GbE ports Advertised as AC1200 for its 867Mbps (2x2) 5GHz band and 300 Mbps (2x2) 2.4GHz band. Specs: - SoC: MediaTek MT7620A - Ethernet: 5x GbE ports (Realtek RTL8367S) - Wireless 2.4GHz: MediaTek MT7620A - Wireless 5GHz: MediaTek MT7612E - RAM: 64MiB - ROM: 8MiB (GD25Q64CSIG) - 1 USB 2.0 port - 2 Buttons (WPS and reset) - 8 LEDs Flash instructions: Currently one has to install OpenWrt only via the serial console 1. Rename the factory.bin to to test.bin 2. start a TFTP server from IP address 192.168.0.225 and serve the image named test.bin 3. connect your device to the LAN port 4. power up the router and press 4 on the console to stop the boot process. 5. enter the following commands on the router console tftp 0x80060000 test.bin erase tplink 0x20000 0x7a0000 cp.b 0x80060000 0x20000 0x7a0000 reset Signed-off-by: DENG Qingfang [Update leds, add fast-read] Signed-off-by: Gaspare Bruno [Rebuilt version based on mt7620 tplink_archer.dtsi, support for external LNA, remove bad cell count info] Signed-off-by: Mieczyslaw Nalewaj --- diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-c5-v4.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-c5-v4.dts new file mode 100644 index 0000000000..4707bdf1e2 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_tplink_archer-c5-v4.dts @@ -0,0 +1,127 @@ +#include + +#include "mt7620a_tplink_archer.dtsi" + +/ { + compatible = "tplink,archer-c5-v4", "ralink,mt7620a-soc"; + model = "TP-Link Archer C5 v4"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + label-mac-device = ðernet; + }; + + leds { + compatible = "gpio-leds"; + + led_power: led-0 { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + }; + + led-1 { + function = LED_FUNCTION_WLAN; + color = ; + function-enumerator = <2>; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + led-2 { + function = LED_FUNCTION_WLAN; + color = ; + function-enumerator = <5>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led-3 { + function = LED_FUNCTION_WAN; + color = ; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + led-4 { + function = LED_FUNCTION_WAN; + color = ; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + led-5 { + function = LED_FUNCTION_LAN; + color = ; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + led-6 { + function = LED_FUNCTION_USB; + color = ; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + + led-7 { + function = LED_FUNCTION_WPS; + color = ; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + }; + }; + + rtl8367s { + compatible = "realtek,rtl8367b"; + cpu_port = <7>; + realtek,extif2 = <1 0 1 1 1 1 1 1 2>; + mii-bus = <&mdio0>; + phy-id = <29>; + }; +}; + +&spi0 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&state_default { + gpio { + groups = "i2c", "uartf", "ephy", "rgmii2"; + function = "gpio"; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &mdio_pins>; + + port@5 { + status = "okay"; + mediatek,fixed-link = <1000 1 1 1>; + phy-mode = "rgmii"; + }; + + mdio0: mdio-bus { + status = "okay"; + reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + reset-delay-us = <10000>; + }; +}; + +&wmac { + pinctrl-names = "default", "pa_gpio"; + pinctrl-0 = <&pa_pins>; + pinctrl-1 = <&pa_gpio_pins>; + + nvmem-cells = <&eeprom_radio_0>, <&macaddr_rom_f100 0>; + nvmem-cell-names = "eeprom", "mac-address"; +}; + +&wifi { + nvmem-cells = <&eeprom_radio_8000>, <&macaddr_rom_f100 2>; + nvmem-cell-names = "eeprom", "mac-address"; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 883aacabe0..4b35cb6f87 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -1214,6 +1214,23 @@ define Device/tplink_archer-c2-v1 endef TARGET_DEVICES += tplink_archer-c2-v1 +define Device/tplink_archer-c5-v4 + $(Device/tplink-v2) + SOC := mt7620a + IMAGE_SIZE := 7808k + TPLINK_FLASHLAYOUT := 8Mmtk + TPLINK_HWID := 0x04da857c + TPLINK_HWREV := 0x0c000600 + TPLINK_HWREVADD := 0x04000000 + IMAGES += tftp-recovery.bin + IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin) + DEVICE_MODEL := Archer C5 + DEVICE_VARIANT := v4 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \ + kmod-mt76x2 kmod-switch-rtl8367b +endef +TARGET_DEVICES += tplink_archer-c5-v4 + define Device/tplink_archer-c50-v1 $(Device/tplink-v2) SOC := mt7620a diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds index c4f7fcbb87..ffc5745e6f 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds @@ -225,6 +225,10 @@ tplink,archer-c20i) ucidef_set_led_switch "lan" "lan" "blue:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "blue:wan" "switch0" "0x01" ;; +tplink,archer-c5-v4) + ucidef_set_led_switch "lan" "lan" "green:lan" "switch1" "0x0f" + ucidef_set_led_switch "wan" "wan" "green:wan" "switch1" "0x10" + ;; tplink,archer-c50-v1) ucidef_set_led_switch "lan" "lan" "green:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x01" diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index cbfb8a1d86..167bb47b69 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -235,6 +235,12 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0" ;; + tplink,archer-c5-v4) + ucidef_add_switch "switch0" + ucidef_add_switch_attr "switch0" "enable" "0" + ucidef_add_switch "switch1" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "7@eth0" + ;; tplink,archer-mr200) ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0" @@ -407,6 +413,7 @@ ramips_setup_macs() tplink,archer-c2-v1|\ tplink,archer-c20-v1|\ tplink,archer-c20i|\ + tplink,archer-c5-v4|\ tplink,archer-c50-v1|\ tplink,archer-mr200) wan_mac=$(macaddr_add "$(mtd_get_mac_binary rom 0xf100)" 1)