From: Sam Bobroff Date: Wed, 12 Sep 2018 01:23:32 +0000 (+1000) Subject: powerpc/eeh: Cleanup eeh_ops.wait_state() X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=fef7f905523fb96b431e5e73487a689c10c77875;p=openwrt%2Fstaging%2Fblogic.git powerpc/eeh: Cleanup eeh_ops.wait_state() The wait_state member of eeh_ops does not need to be platform dependent; it's just logic around eeh_ops.get_state(). Therefore, merge the two (slightly different!) platform versions into a new function, eeh_wait_state() and remove the eeh_ops member. While doing this, also correct: * The wait logic, so that it never waits longer than max_wait. * The wait logic, so that it never waits less than EEH_STATE_MIN_WAIT_TIME. * One call site where the result is treated like a bit field before it's checked for negative error values. * In pseries_eeh_get_state(), rename the "state" parameter to "delay" because that's what it is. Signed-off-by: Sam Bobroff Signed-off-by: Michael Ellerman --- diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h index 247f09ce44de..8b596d096ebe 100644 --- a/arch/powerpc/include/asm/eeh.h +++ b/arch/powerpc/include/asm/eeh.h @@ -205,9 +205,8 @@ struct eeh_ops { void* (*probe)(struct pci_dn *pdn, void *data); int (*set_option)(struct eeh_pe *pe, int option); int (*get_pe_addr)(struct eeh_pe *pe); - int (*get_state)(struct eeh_pe *pe, int *state); + int (*get_state)(struct eeh_pe *pe, int *delay); int (*reset)(struct eeh_pe *pe, int option); - int (*wait_state)(struct eeh_pe *pe, int max_wait); int (*get_log)(struct eeh_pe *pe, int severity, char *drv_log, unsigned long len); int (*configure_bridge)(struct eeh_pe *pe); int (*err_inject)(struct eeh_pe *pe, int type, int func, @@ -264,6 +263,7 @@ typedef void *(*eeh_edev_traverse_func)(struct eeh_dev *edev, void *flag); typedef void *(*eeh_pe_traverse_func)(struct eeh_pe *pe, void *flag); void eeh_set_pe_aux_size(int size); int eeh_phb_pe_create(struct pci_controller *phb); +int eeh_wait_state(struct eeh_pe *pe, int max_wait); struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb); struct eeh_pe *eeh_pe_next(struct eeh_pe *pe, struct eeh_pe *root); struct eeh_pe *eeh_pe_get(struct pci_controller *phb, diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index 12e5311d06ed..6cae6b56ffd6 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -681,7 +681,7 @@ int eeh_pci_enable(struct eeh_pe *pe, int function) /* Check if the request is finished successfully */ if (active_flag) { - rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC); + rc = eeh_wait_state(pe, PCI_BUS_RESET_WAIT_MSEC); if (rc < 0) return rc; @@ -920,16 +920,15 @@ int eeh_pe_reset_full(struct eeh_pe *pe) break; /* Wait until the PE is in a functioning state */ - state = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC); - if (eeh_state_active(state)) - break; - + state = eeh_wait_state(pe, PCI_BUS_RESET_WAIT_MSEC); if (state < 0) { pr_warn("%s: Unrecoverable slot failure on PHB#%x-PE#%x", __func__, pe->phb->global_number, pe->addr); ret = -ENOTRECOVERABLE; break; } + if (eeh_state_active(state)) + break; /* Set error in case this is our last attempt */ ret = -EIO; diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index c827617613c1..e7f757cd839b 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -836,7 +836,7 @@ void eeh_handle_normal_event(struct eeh_pe *pe) /* Get the current PCI slot state. This can take a long time, * sometimes over 300 seconds for certain systems. */ - rc = eeh_ops->wait_state(pe, MAX_WAIT_FOR_RECOVERY*1000); + rc = eeh_wait_state(pe, MAX_WAIT_FOR_RECOVERY*1000); if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) { pr_warn("EEH: Permanent failure\n"); goto hard_fail; diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c index e43dcefbe73f..6fa2032e0594 100644 --- a/arch/powerpc/kernel/eeh_pe.c +++ b/arch/powerpc/kernel/eeh_pe.c @@ -108,6 +108,57 @@ int eeh_phb_pe_create(struct pci_controller *phb) return 0; } +/** + * eeh_wait_state - Wait for PE state + * @pe: EEH PE + * @max_wait: maximal period in millisecond + * + * Wait for the state of associated PE. It might take some time + * to retrieve the PE's state. + */ +int eeh_wait_state(struct eeh_pe *pe, int max_wait) +{ + int ret; + int mwait; + + /* + * According to PAPR, the state of PE might be temporarily + * unavailable. Under the circumstance, we have to wait + * for indicated time determined by firmware. The maximal + * wait time is 5 minutes, which is acquired from the original + * EEH implementation. Also, the original implementation + * also defined the minimal wait time as 1 second. + */ +#define EEH_STATE_MIN_WAIT_TIME (1000) +#define EEH_STATE_MAX_WAIT_TIME (300 * 1000) + + while (1) { + ret = eeh_ops->get_state(pe, &mwait); + + if (ret != EEH_STATE_UNAVAILABLE) + return ret; + + if (max_wait <= 0) { + pr_warn("%s: Timeout when getting PE's state (%d)\n", + __func__, max_wait); + return EEH_STATE_NOT_SUPPORT; + } + + if (mwait < EEH_STATE_MIN_WAIT_TIME) { + pr_warn("%s: Firmware returned bad wait value %d\n", + __func__, mwait); + mwait = EEH_STATE_MIN_WAIT_TIME; + } else if (mwait > EEH_STATE_MAX_WAIT_TIME) { + pr_warn("%s: Firmware returned too long wait value %d\n", + __func__, mwait); + mwait = EEH_STATE_MAX_WAIT_TIME; + } + + msleep(min(mwait, max_wait)); + max_wait -= mwait; + } +} + /** * eeh_phb_pe_get - Retrieve PHB PE based on the given PHB * @phb: PCI controller diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c index fd1db9f286f1..abc0be7507c8 100644 --- a/arch/powerpc/platforms/powernv/eeh-powernv.c +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c @@ -1133,43 +1133,6 @@ static int pnv_eeh_reset(struct eeh_pe *pe, int option) return pnv_eeh_bridge_reset(bus->self, option); } -/** - * pnv_eeh_wait_state - Wait for PE state - * @pe: EEH PE - * @max_wait: maximal period in millisecond - * - * Wait for the state of associated PE. It might take some time - * to retrieve the PE's state. - */ -static int pnv_eeh_wait_state(struct eeh_pe *pe, int max_wait) -{ - int ret; - int mwait; - - while (1) { - ret = pnv_eeh_get_state(pe, &mwait); - - /* - * If the PE's state is temporarily unavailable, - * we have to wait for the specified time. Otherwise, - * the PE's state will be returned immediately. - */ - if (ret != EEH_STATE_UNAVAILABLE) - return ret; - - if (max_wait <= 0) { - pr_warn("%s: Timeout getting PE#%x's state (%d)\n", - __func__, pe->addr, max_wait); - return EEH_STATE_NOT_SUPPORT; - } - - max_wait -= mwait; - msleep(mwait); - } - - return EEH_STATE_NOT_SUPPORT; -} - /** * pnv_eeh_get_log - Retrieve error log * @pe: EEH PE @@ -1688,7 +1651,6 @@ static struct eeh_ops pnv_eeh_ops = { .get_pe_addr = pnv_eeh_get_pe_addr, .get_state = pnv_eeh_get_state, .reset = pnv_eeh_reset, - .wait_state = pnv_eeh_wait_state, .get_log = pnv_eeh_get_log, .configure_bridge = pnv_eeh_configure_bridge, .err_inject = pnv_eeh_err_inject, diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index 823cb27efa8b..c9e5ca4afb26 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -438,7 +438,7 @@ static int pseries_eeh_get_pe_addr(struct eeh_pe *pe) /** * pseries_eeh_get_state - Retrieve PE state * @pe: EEH PE - * @state: return value + * @delay: suggested time to wait if state is unavailable * * Retrieve the state of the specified PE. On RTAS compliant * pseries platform, there already has one dedicated RTAS function @@ -448,7 +448,7 @@ static int pseries_eeh_get_pe_addr(struct eeh_pe *pe) * RTAS calls for the purpose, we need to try the new one and back * to the old one if the new one couldn't work properly. */ -static int pseries_eeh_get_state(struct eeh_pe *pe, int *state) +static int pseries_eeh_get_state(struct eeh_pe *pe, int *delay) { int config_addr; int ret; @@ -499,7 +499,8 @@ static int pseries_eeh_get_state(struct eeh_pe *pe, int *state) break; case 5: if (rets[2]) { - if (state) *state = rets[2]; + if (delay) + *delay = rets[2]; result = EEH_STATE_UNAVAILABLE; } else { result = EEH_STATE_NOT_SUPPORT; @@ -553,64 +554,6 @@ static int pseries_eeh_reset(struct eeh_pe *pe, int option) return ret; } -/** - * pseries_eeh_wait_state - Wait for PE state - * @pe: EEH PE - * @max_wait: maximal period in millisecond - * - * Wait for the state of associated PE. It might take some time - * to retrieve the PE's state. - */ -static int pseries_eeh_wait_state(struct eeh_pe *pe, int max_wait) -{ - int ret; - int mwait; - - /* - * According to PAPR, the state of PE might be temporarily - * unavailable. Under the circumstance, we have to wait - * for indicated time determined by firmware. The maximal - * wait time is 5 minutes, which is acquired from the original - * EEH implementation. Also, the original implementation - * also defined the minimal wait time as 1 second. - */ -#define EEH_STATE_MIN_WAIT_TIME (1000) -#define EEH_STATE_MAX_WAIT_TIME (300 * 1000) - - while (1) { - ret = pseries_eeh_get_state(pe, &mwait); - - /* - * If the PE's state is temporarily unavailable, - * we have to wait for the specified time. Otherwise, - * the PE's state will be returned immediately. - */ - if (ret != EEH_STATE_UNAVAILABLE) - return ret; - - if (max_wait <= 0) { - pr_warn("%s: Timeout when getting PE's state (%d)\n", - __func__, max_wait); - return EEH_STATE_NOT_SUPPORT; - } - - if (mwait <= 0) { - pr_warn("%s: Firmware returned bad wait value %d\n", - __func__, mwait); - mwait = EEH_STATE_MIN_WAIT_TIME; - } else if (mwait > EEH_STATE_MAX_WAIT_TIME) { - pr_warn("%s: Firmware returned too long wait value %d\n", - __func__, mwait); - mwait = EEH_STATE_MAX_WAIT_TIME; - } - - max_wait -= mwait; - msleep(mwait); - } - - return EEH_STATE_NOT_SUPPORT; -} - /** * pseries_eeh_get_log - Retrieve error log * @pe: EEH PE @@ -849,7 +792,6 @@ static struct eeh_ops pseries_eeh_ops = { .get_pe_addr = pseries_eeh_get_pe_addr, .get_state = pseries_eeh_get_state, .reset = pseries_eeh_reset, - .wait_state = pseries_eeh_wait_state, .get_log = pseries_eeh_get_log, .configure_bridge = pseries_eeh_configure_bridge, .err_inject = NULL,