From: David Bauer Date: Sat, 7 Oct 2023 17:04:10 +0000 (+0200) Subject: uim: support SIM card power-up/down X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ffc5eea4c0eb3dac6fa5058e101340012fbf1fb4;p=project%2Fuqmi.git uim: support SIM card power-up/down Support the power-up and power-down commands for the modem's SIM card. This allows to reset the SIM card and recover it from an illegal card application state. Signed-off-by: David Bauer --- diff --git a/commands-uim.c b/commands-uim.c index 68803b4..ff01d7b 100644 --- a/commands-uim.c +++ b/commands-uim.c @@ -19,6 +19,8 @@ * Boston, MA 02110-1301 USA. */ +static int uim_slot = 0; + #define cmd_uim_verify_pin1_cb no_cb static enum qmi_cmd_result cmd_uim_verify_pin1_prepare(struct qmi_dev *qmi, struct qmi_request *req, struct qmi_msg *msg, char *arg) @@ -130,3 +132,53 @@ cmd_uim_get_sim_state_prepare(struct qmi_dev *qmi, struct qmi_request *req, stru qmi_set_uim_get_card_status_request(msg); return QMI_CMD_REQUEST; } + +#define cmd_uim_slot_cb no_cb +static enum qmi_cmd_result +cmd_uim_slot_prepare(struct qmi_dev *qmi, struct qmi_request *req, struct qmi_msg *msg, char *arg) +{ + char *err; + int value = strtoul(arg, &err, 10); + if ((err && *err) || value < 1 || value > 2) { + uqmi_add_error("Invalid UIM-Slot value. Allowed: [1,2]"); + return QMI_CMD_EXIT; + } + + uim_slot = value; + + return QMI_CMD_DONE; +} + +#define cmd_uim_power_off_cb no_cb +static enum qmi_cmd_result +cmd_uim_power_off_prepare(struct qmi_dev *qmi, struct qmi_request *req, struct qmi_msg *msg, char *arg) +{ + struct qmi_uim_power_off_sim_request data = { + QMI_INIT(slot, uim_slot) + }; + + if (!uim_slot) { + uqmi_add_error("UIM-Slot not set. Use --uim-slot to set it."); + return QMI_CMD_EXIT; + } + + qmi_set_uim_power_off_sim_request(msg, &data); + return QMI_CMD_REQUEST; +} + +#define cmd_uim_power_on_cb no_cb +static enum qmi_cmd_result +cmd_uim_power_on_prepare(struct qmi_dev *qmi, struct qmi_request *req, struct qmi_msg *msg, char *arg) +{ + struct qmi_uim_power_on_sim_request data = { + QMI_INIT(slot, uim_slot) + }; + + if (!uim_slot) { + uqmi_add_error("UIM-Slot not set. Use --uim-slot to set it."); + return QMI_CMD_EXIT; + } + + qmi_set_uim_power_on_sim_request(msg, &data); + return QMI_CMD_REQUEST; +} diff --git a/commands-uim.h b/commands-uim.h index 02a49b1..191f09c 100644 --- a/commands-uim.h +++ b/commands-uim.h @@ -20,13 +20,20 @@ */ #define __uqmi_uim_commands \ + __uqmi_command(uim_slot, uim-slot, required, CMD_TYPE_OPTION), \ __uqmi_command(uim_verify_pin1, uim-verify-pin1, required, QMI_SERVICE_UIM), \ __uqmi_command(uim_verify_pin2, uim-verify-pin2, required, QMI_SERVICE_UIM), \ - __uqmi_command(uim_get_sim_state, uim-get-sim-state, no, QMI_SERVICE_UIM) \ + __uqmi_command(uim_get_sim_state, uim-get-sim-state, no, QMI_SERVICE_UIM), \ + __uqmi_command(uim_power_off, uim-power-off, no, QMI_SERVICE_UIM), \ + __uqmi_command(uim_power_on, uim-power-on, no, QMI_SERVICE_UIM) \ #define uim_helptext \ " --uim-verify-pin1 : Verify PIN1 (new devices)\n" \ " --uim-verify-pin2 : Verify PIN2 (new devices)\n" \ " --uim-get-sim-state: Get current SIM state\n" \ + " --uim-power-off: Power off SIM card\n" \ + " --uim-slot: SIM slot [1-2]\n" \ + " --uim-power-on: Power on SIM card\n" \ + " --uim-slot: SIM slot [1-2]\n" \