Leon M. George [Thu, 5 May 2022 21:19:53 +0000 (23:19 +0200)]
base-files: ipcalc.sh: check for params before calculating start/end
With this patch, ipcalc only calculates range boundaries if the
corresponding parameters are supplied.
Signed-off-by: Leon M. George <leon@georgemail.eu>
Rafał Miłecki [Tue, 7 Feb 2023 17:09:40 +0000 (18:09 +0100)]
bcm47xx: revert bgmac back to the old limited max frame size
Bumping max frame size has significantly affected network performance
and memory usage. It was done by upstream commit that first appeared in
the 5.7 release.
Allocating 512 (BGMAC_RX_RING_SLOTS) buffers, 10 k each, is clearly a
bad idea on 32 MiB devices. This commit fixes support for Linksys E1000
V2.1 which gives up after allocating ~346 such buffers running 5.15
kernel.
Ref:
230c9da963aa ("bcm53xx: revert bgmac back to the old limited max frame size")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Filip Matijević [Sun, 5 Feb 2023 08:34:41 +0000 (09:34 +0100)]
ipq806x: add missing enclosing reserved-memory block on C2600/AD7200
Most of the time when booting kernel prints a warning from
mm/page_alloc.c when pstore/ramoops is being initialized and ramoops is
not functional.
Fix this by moving ramopps node into reserved-memory block as described
in kernel documentation.
Fixes: 2964e5024c ("ipq806x: kernel ramoops storage for C2600/AD7200")
Signed-off-by: Filip Matijević <filip.matijevic.pz@gmail.com>
Robert Marko [Thu, 2 Feb 2023 09:34:52 +0000 (10:34 +0100)]
ipq807x: refresh kernel config
Refresh the ipq807x kernel config to keep it up to date and in sync with
the generic one.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Christian Marangi [Mon, 6 Feb 2023 20:33:26 +0000 (21:33 +0100)]
iwinfo: bump to latest git HEAD
c7eb8eb nl80211: restore iterating over all devices in nl80211_phy2ifname()
Fixes: #11902
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cezary Jackiewicz [Sun, 5 Feb 2023 06:24:05 +0000 (07:24 +0100)]
ipq40xx: fix assignment of lan port numbers for Cell C RTL30VW
After switching to DSA, the LAN ports in Cell C RTL30VW have swapped numbers. Assigning the right numbers.
Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
Nick Hainke [Sun, 5 Feb 2023 13:59:03 +0000 (14:59 +0100)]
tools/pkgconf: add PKG_CPE_ID
Add PKG_CPE_ID to track vulnerabilities.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sun, 5 Feb 2023 13:06:35 +0000 (14:06 +0100)]
tools/pkgconf: update to 1.9.4
Release information:
https://github.com/pkgconf/pkgconf/blob/master/NEWS
Fixes CVE-2023-24056.
Further, this commit corrects the "-Dtests" flag and changes it from
"false" to "disabled".
Signed-off-by: Nick Hainke <vincent@systemli.org>
John Audia [Sat, 26 Feb 2022 13:29:02 +0000 (08:29 -0500)]
tools/coreutils: update to 9.1
In addition to version update, this commit applies a fixup to allow building
on MacOS involving renaming: [gt_TYPE_WINT_T] --> [gt_TYPE_WINT_T_GNUTLS]
suggested by zhanhb.
Build system: x86_64
Build-tested: bcm2711/RPi4B
Signed-off-by: John Audia <graysky@archlinux.us>
Brian Norris [Wed, 25 Jan 2023 06:42:07 +0000 (22:42 -0800)]
ipq806x: onhub: Enable fstools_partname_fallback_scan
When fstools is unable to parse our root=<...> arg correctly, it can
fall back to scanning all block devices for a 'rootfs_data' partition.
This fallback was deemed wrong (or at least, a breaking/incompatible
change) for some targets, so we're forced to opt back into it with
fstools_partname_fallback_scan=1.
Without this, OnHub devices will use a rootfs-appended loop device for
rootfs_data instead of the intended 3rd partition.
While I'm at it, just move all the boot args into the 'cros-vboot'
build rule, instead of using the custom bootargs-append. All cros-vboot
subtargets here are using the same rootwait (to support both eMMC and
USB boot) and root/partition args.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
[ drop unrelated comments in commit description ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Sat, 4 Feb 2023 19:04:58 +0000 (20:04 +0100)]
fstools: bump to latest Git HEAD
14d535e partname: Correct fstools_partname_fallback_scan comparison
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Rosen Penev [Fri, 3 Feb 2023 23:51:50 +0000 (15:51 -0800)]
ipq807x: remove libwolfsslcpu-crypto dependency
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Wed, 25 Jan 2023 21:02:12 +0000 (13:02 -0800)]
treewide: replace libustream-wolfssl with -mbedtls
Previous commit does the same for wpad-basic. Also matches
DEFAULT_VARIANT in ustream-ssl Makefile.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Wed, 28 Dec 2022 04:44:11 +0000 (20:44 -0800)]
treewide: replace wpad-basic-wolfssl default
The newly merged mbedtls backend is smaller and has fewer ABI related
issues than the wolfSSL one.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Andre Heider [Tue, 31 Jan 2023 14:58:08 +0000 (15:58 +0100)]
scripts: size_compare: print a grand total
Usefull to check the impact of treewide changes:
Change Local Remote Package
+281 6191 5910 ubus
-547 56166 56713 procd
-13294 91544 104838 ubi-utils
~~~~~~~ total change -13560
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Mon, 30 Jan 2023 17:37:39 +0000 (18:37 +0100)]
scripts: size_compare: fix support for CONFIG_BINARY_FOLDER
There is no CONFIG_BINARY_DIR, it's CONFIG_BINARY_FOLDER.
While at it, don't parse the shell compatible .config, eval it.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Sun, 13 Nov 2022 06:06:27 +0000 (07:06 +0100)]
scripts: qemustart: support CONFIG_BINARY_FOLDER
If CONFIG_BINARY_FOLDER is set in .config, use that instead of "bin" as
the bindir.
That allows to set that config and easily run e.g.
`./scripts/qemustart armvirt 32`.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Arınç ÜNAL [Mon, 28 Nov 2022 21:33:37 +0000 (00:33 +0300)]
ramips: mt7621-dts: fix phy-mode of external phy on GB-PC2
The phy-mode property must be defined on the MAC instead of the PHY. Define
phy-mode under gmac1 which the external phy is connected to.
Tested-by: Petr Louda <petr.louda@outlook.cz>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Brian Norris [Wed, 21 Dec 2022 06:21:46 +0000 (22:21 -0800)]
base-files: upgrade: Fix export_partdevice() quoting
$BOOTDEV_MAJOR may be empty for many of the uevents parsed in this
function. This condition thus tends to fail benignly (we just skip to
the next device), but it can really clutter the stage2 sysupgrade
stderr, since it looks like the "=" operand doesn't have an appropriate
left-hand argument.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Tomasz Maciej Nowak [Mon, 23 Jan 2023 13:44:15 +0000 (14:44 +0100)]
x86: add Barracuda Networks F12 interfaces
Match interface numbers with printed numbers on device enclosure and
assign first port as WAN interface.
Notes
Serial console is available through RJ-45 port with Cisco pinout
baud: 19200, parity: none, flow control: none
The device is setup with UEFI. To enter setup hold DEL or ESC key on
boot. Default UEFI Administrator password is: bcndk1
For users using graphics IC it's advisable to disable display with:
i915.disable_display=1
appending to kernel command line inside bootloader, to save about
0.5-0.6W energy on idle.
For users not using graphics IC, disable it in UEFI, this will save about
1.5W energy on idle.
Pins marked CN19 are ATX power On/Off button.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Arınç ÜNAL [Thu, 26 Jan 2023 19:17:40 +0000 (22:17 +0300)]
ramips: mt7621-dts: fix compatible string for mt7530 on TP-Link EAP615-Wall
The correct compatible string for the multi-chip module MT7530 switch in
MT7621AT, MT7621DAT and MT7621ST SoCs is mediatek,mt7621. Remove the
property on TP-Link EAP615-Wall which will default to the said string.
Fixes: a1b8a4d7b3ff ("ramips: support TP-Link EAP615-Wall")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Brian Norris [Fri, 27 Jan 2023 20:53:32 +0000 (12:53 -0800)]
kernel: modules: add lkdtm module
Useful for debugging panic/error handling, crash logging, and more.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Jan Hoffmann [Fri, 27 Jan 2023 23:01:18 +0000 (00:01 +0100)]
ramips: use on-flash partition table for Sercomm BZV/CHJ
These devices have a partition table stored in flash, which compensates
for any pre-existing bad blocks by enlarging the respective partition.
This means that the current static partition table is only correct for
devices without any bad blocks.
Typical results of this mismatch are degraded wireless performance and
wrong MAC addresses, when the factory partition is shifted due to a bad
block somewhere before it. If there is a bad block already before the
ubi partition, then OpenWrt may not run at all because the kernel can't
find the rootfs.
Use the on-flash partition table to fix these issues. Replace the two
reserved partitions by the full partition list, as the driver does not
allow merging them.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Jan Hoffmann [Sat, 28 Jan 2023 19:45:24 +0000 (20:45 +0100)]
ltq-*-app: extend ubus metrics/statistics
Expose a few additional useful values via ubus:
- Channel error counters (CRC, FEC)
- Retransmission counters (MINEFTR, LEFTRS)
- Impulse noise protection level
- Rate adaptation mode
- OLR statistics (Bitswap, SRA, SOS)
- Pilot tones
- Upstream/downstream band information
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Jan Hoffmann [Sat, 28 Jan 2023 19:29:22 +0000 (20:29 +0100)]
ltq-vdsl-vr9: fix upstream MINEFTR
The upstream value read from the device seems to already be in bits per
second, so there is no need to multiply by 1000 again (which for typical
values causes an overflow of the 32-bit unsigned integer).
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Tony Butler [Sun, 25 Dec 2022 23:11:48 +0000 (15:11 -0800)]
treewide: strip useless `default n` Kconfig lines
Kconfig docs say:
> The default value deliberately defaults to 'n' in order to avoid
> bloating the build.
Apply this rule everywhere, to avoid more cloning of bad examples
Signed-off-by: Tony Butler <spudz76@gmail.com>
Chen Minqiang [Tue, 24 Jan 2023 23:55:12 +0000 (07:55 +0800)]
wolfssl: fix build with make < 4.2
Inline the preinst.arm-ce script. Support for including was added in
make 4.2 and is not working with older make versions.
Fixes: https://github.com/openwrt/openwrt/issues/11866
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
Mark Ceeha [Sun, 29 Jan 2023 15:01:40 +0000 (16:01 +0100)]
ramips: add support for TP-Link Deco M4R v4
This commit adds support for the V4 hardware revision of the Deco M4R.
V4 is a complete overhaul of the hardware compared to V1 and V2,
and is much more similar to the Archer C6 V3 and C6U V1.
Specifications:
SoC: MediaTek MT7621AT (2 cores at 880 MHz, 4 threads)
RAM: Kingston D1216ECMDXGJD (256 MB)
Wireless 2.4 GHz: MediaTek MT7603EN
Wireless 5 GHz: MediaTek MT7613BEN
Flash: 16 MB SPI NOR
Installation:
Flash the *-factory.bin image in the U-Boot recovery webserver.
You can trigger this webserver by holding the reset button until the LED
flashes yellow, or by hooking up to serial pads on the board (clearly
labeled GND, RX and TX) and pressing `x` early in boot.
Once the factory image has been flashed, you can use the regular upgrade
procedure with sysupgrade images for subsequent flashes.
Signed-off-by: Mark Ceeha <hi@shiz.me>
Tested-by: Mark Ceeha <hi@shiz.me>
Mark Ceeha [Sun, 8 Jan 2023 02:29:07 +0000 (03:29 +0100)]
firmware-utils: bump to git HEAD
Adds support for building TP-Link Deco M4R v4 factory images
e7233d229c2c tplink-safeloader: Add support for Deco M4R V4
Signed-off-by: Mark Ceeha <hi@shiz.me>
Hauke Mehrtens [Sun, 22 Jan 2023 19:04:35 +0000 (20:04 +0100)]
bcm47xx: Refresh kernel 5.15
This makes the patches and the kernel configuration apply on top of
kernel 5.15.
The following patch was removed because the old IDE subsystem was
removed from upstream kernel:
target/linux/bcm47xx/patches-5.15/610-pci_ide_fix.patch
This was tested successfully on a ASUS WL-500g Premium V1.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 22 Jan 2023 18:08:04 +0000 (19:08 +0100)]
bcm47xx: Copy kernel from 5.10 to 5.15
Copy patches and configuration from kernel 5.10 to kernel 5.15 files. No
changes were done.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Rosen Penev [Sat, 20 Aug 2022 21:10:21 +0000 (14:10 -0700)]
mvebu/uDPU: add quotes to unmount file
This is the last relevant shellcheck warning thrown.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 20 Aug 2022 21:02:58 +0000 (14:02 -0700)]
mvebu/uDPU: remove $? usage
shellcheck warns against it with SC2086. It also hides a bug that
shellcheck marks with SC2015. Fixed those with explicit if/else.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 20 Aug 2022 20:56:51 +0000 (13:56 -0700)]
mvebu/uDPU: remove echo y
It's a bit of a hack. mkfs.ext4 has an -F parameter that does the same
thing.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 20 Aug 2022 20:50:40 +0000 (13:50 -0700)]
mvebu/uDPU: simplify grep usage
Instead of using the shell's evaluation, use grep's -q parameter.
Found with shellcheck's SC2143.
Also replaced a head call with grep's -m.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Glenn Strauss [Fri, 28 Oct 2022 02:26:48 +0000 (22:26 -0400)]
mbedtls: x509 crt verify SAN iPAddress
backport from
X509 crt verify SAN iPAddress
https://github.com/Mbed-TLS/mbedtls/pull/6475
addresses
curl built with mbedtls fails on https://1.1.1.1/ (IP address in SubjectAltName)
https://github.com/Mbed-TLS/mbedtls/issues/6473
filed for
mbedTLS: BADCERT_CN_MISMATCH on https://1.1.1.1 with curl+mbedtls
https://github.com/openwrt/packages/issues/19677
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
John Audia [Wed, 1 Feb 2023 20:44:56 +0000 (15:44 -0500)]
kernel: bump 5.10 to 5.10.166
All patches automatically rebased.
Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Wed, 1 Feb 2023 20:37:19 +0000 (15:37 -0500)]
kernel: bump 5.15 to 5.15.91
Manually rebased:
pending-5.15/103-kbuild-export-SUBARCH.patch
All other patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
Felix Fietkau [Thu, 2 Feb 2023 10:37:36 +0000 (11:37 +0100)]
mt76: update PKG_SOURCE_HASH
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 2 Feb 2023 10:36:46 +0000 (11:36 +0100)]
mt76: fix typo in PKG_SOURCE_DATE
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 2 Feb 2023 10:08:09 +0000 (11:08 +0100)]
mt76: update to the latest version, import WED related mtk_eth_soc patches
6c256218e59e wifi: mt76: dma: use napi_build_skb
679254c50f27 mt7915: add CONFIG_MT76_LEDS to cflags
15b9dd6b1b6a wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after init_work
8e5c21fe7c5c wifi: mt76: mt7915: rework mt7915_mcu_set_thermal_throttling
87cb74fe42d9 wifi: mt76: mt7915: rework mt7915_thermal_temp_store()
c6f24b83eba5 wifi: mt76: mt7915: add error message in mt7915_thermal_set_cur_throttle_state()
99e96b89ee4d wifi: mt76: mt7915: add chip id condition in mt7915_check_eeprom()
833cd420480f wifi: mt76: mt7921: fix channel switch fail in monitor mode
f1f8bae6092d wifi: mt76: mt7921: add ack signal support
f47087a6dd62 wifi: mt76: mt7996: fix chainmask calculation in mt7996_set_antenna()
2f3b0acc1588 wifi: mt76: mt7996: update register for CFEND_RATE
7e9540dcbd70 wifi: mt76: mt7996: do not hardcode vht beamform cap
a37e427d0959 wifi: mt76: connac: fix POWER_CTRL command name typo
98aa346042bd wifi: mt76: mt7915: remove BW160 and BW80+80 support
94fed6a43541 wifi: mt76: mt7921: fix invalid remain_on_channel duration
3c162384d80a wifi: mt76: introduce mt76_queue_is_wed_rx utility routine
a409a9454587 wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exit
8b27ecd3a684 wifi: mt76: mt7996: fix memory leak in mt7996_mcu_exit
683760461dd0 wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanup
0c750cf08f85 wifi: mt76: dma: fix memory leak running mt76_dma_tx_cleanup
5de9ae29bea2 wifi: mt76: mt7915: avoid mcu_restart function pointer
dad96dd3e62d wifi: mt76: mt7603: avoid mcu_restart function pointer
19d36dd9c8ea wifi: mt76: mt7615: avoid mcu_restart function pointer
6fe2c2383d3d wifi: mt76: mt7921: avoid mcu_restart function pointer
9df89143bf71 wifi: mt76: mt7915: get rid of wed rx_buf_ring page_frag_cache
8d51d11760cb wifi: mt76: fix switch default case in mt7996_reverse_frag0_hdr_trans
0d8057dbd51c wifi: mt76: mt7921u: add support for Comfast CF-952AX
ddbf4e933d54 wifi: mt76: mt7915: set sku initial value to zero
06a8904e954e wifi: mt76: mt7915: wed: enable red per-band token drop
724a337caef9 wifi: mt76: mt7915: fix WED TxS reporting
747ca943a5bb wifi: mt76: add flexible polling wait-interval support
133d7859977a wifi: mt76: mt7921: reduce polling time in pmctrl
5fe319a0550e wifi: mt76: add memory barrier to SDIO queue kick
822f060b9d19 wifi: mt76: mt7921: fix rx filter incorrect by drv/fw inconsistent
c6794954a723 wifi: mt76: mt7915: fix memory leak in mt7915_mmio_wed_init_rx_buf
9686cd7cc65c wifi: mt76: switch to page_pool allocator
04da4eaa8235 wifi: mt76: enable page_pool stats
1af4a911ebcb wifi: mt76: mt7915: release rxwi in mt7915_wed_release_rx_buf
e8c10835cf06 wifi: mt76: fix compile error without CONFIG_PAGE_POOL_STATS
0cf0ede7cc42 net: ethernet: mtk_wed: add reset to rx_ring_setup callback
715b3ed9708a net: ethernet: mtk_wed: add reset to tx_ring_setup callback
9107381d0ff3 wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read
36d2a5bf7802 wifi: mt76: mt7996: rely on mt76_connac2_mac_tx_rate_val
c67f57d2cda2 wifi: mt76: dma: add reset to mt76_dma_wed_setup signature
3dace36e2941 wifi: mt76: dma: reset wed queues in mt76_dma_rx_reset
4b229d2da562 wifi: mt76: mt7915: add mt7915 wed reset callbacks
f83958376085 wifi: mt76: mt7915: complete wed reset support
321edbb414dc wifi: mt76: mt7996: rely on mt76_connac_txp_common structure
bdb7dc38a6d1 wifi: mt76: mt7996: rely on mt76_connac_txp_skb_unmap
8688756305c6 wifi: mt76: mt7996: rely on mt76_connac_tx_complete_skb
fbf986dbd4c0 wifi: mt76: mt7996: rely on mt76_connac2_mac_decode_he_radiotap
adc556cbce37 wifi: mt76: mt7996: avoid mcu_restart function pointer
5eb4e2303be4 wifi: mt76: remove __mt76_mcu_restart macro
e7a61c5f70f5 wifi: mt76: add EHT phy type
b375845abc10 wifi: mt76: connac: add CMD_CBW_320MHZ
68b17a243332 wifi: mt76: connac: add helpers for EHT capability
02ec1f61b3a2 wifi: mt76: connac: add cmd id related to EHT support
9209294cd81b wifi: mt76: increase wcid size to 1088
5e85136c9b2f wifi: mt76: add EHT rate stats for ethtool
a171f672fdeb wifi: mt76: mt7996: add variants support
eda8fd62c105 wifi: mt76: mt7996: add helpers for wtbl and interface limit
4a5a9f4cdc3b wifi: mt76: mt7996: rework capability init
06b73c155680 wifi: mt76: mt7996: add EHT capability init
ae71a1b8294f wifi: mt76: mt7996: add support for EHT rate report
65bdfae2991d wifi: mt76: mt7996: enable EHT support in firmware
b2360d59747c wifi: mt76: mt7996: add EHT beamforming support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Christian Marangi [Mon, 23 Jan 2023 18:47:41 +0000 (19:47 +0100)]
CI: use openwrt official tools container by default
Use openwrt official tools container by default.
Fork will use openwrt tools container by default.
This can be disabled by setting the option use_openwrt_container to
false for the build.yml and check-kernel-patches.yml.
The push-containers workflow is disabled on forks. The workflow can be
reenabled by commenting the condition in push-containers.yml.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Hannu Nyman [Mon, 30 Jan 2023 16:20:38 +0000 (18:20 +0200)]
ipq807x: Enable CPU frequency scaling stats
Enable the CPU frequency scaling statistics in kernel config.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Reviewed-by: Robert Marko <robimarko@gmail.com>
INAGAKI Hiroshi [Thu, 29 Sep 2022 04:13:22 +0000 (13:13 +0900)]
realtek: use generic earlycon setup on 5.15
Use generic earlycon on Linux Kernel instead of initialization in platform
setup.
And also, drop bootargs with console= parameter from I-O DATA BSH-G24MB. It
uses 115200bps as baud-rate, the same as default in rtl838x.dtsi.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Zoltan HERPAI [Tue, 24 Jan 2023 18:42:08 +0000 (19:42 +0100)]
mxs: switch default kernel to 5.15
The testing kernel has been available since Mar/2022, let's switch
to it by default.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Robert Marko [Mon, 16 Jan 2023 12:18:56 +0000 (13:18 +0100)]
ath25: mark as source-only
ath25 seems to be a target with low number of users according to download
statistics, most of which are for older releases anyway.
Users that we managed to find are currently building images downstream as
due to low amount of RAM (32MB) default config will not work.
Target also suffers from inability for the 5.15 kernel bump to be tested
which is a requirment for the next release.
So, for those reasons, lets mark it as source-only so that Buildbots dont
use the resources for building the images for this target anymore.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Chuanhong Guo [Mon, 30 Jan 2023 09:55:55 +0000 (17:55 +0800)]
zynq: remove kconfig for 5.10
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Nick Hainke [Tue, 24 Jan 2023 12:01:07 +0000 (13:01 +0100)]
zynq: switch default kernel to 5.15
The default kernel should be switched to 5.15 in order to enable testing
by a broader audience.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Petr Štetiar [Mon, 30 Jan 2023 09:54:45 +0000 (10:54 +0100)]
ubus: fix wrong package mirror hash
I've somehow managed to commit wrong package mirror hash in commit
36076b5a4092
("ubus: update to version 2022-06-15"), so lets fix it by using a proper
one.
Fixes: 36076b5a4092 ("ubus: update to version 2022-06-15")
Reported-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Sander Vanheule [Sun, 29 Jan 2023 09:57:48 +0000 (10:57 +0100)]
realtek: remove KERNEL_PATCHVER overrides
On the realtek target, the subtarget makefiles include a KERNEL_PATCHVER
setting, shadowing KERNEL_PATCHVER from target/linux/realtek/Makefile.
This makes the realtek target an exception in this regard, and makes
switching kernel version a bit bothersome. Remove the overrides so all
subtargets use the same kernel version.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Felix Fietkau [Fri, 27 Jan 2023 18:07:32 +0000 (19:07 +0100)]
kernel: make it possible for packages to select page pool support
Will be used by the next mt76 update
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 27 Jan 2023 18:07:00 +0000 (19:07 +0100)]
bridger: update to the latest version
8be8bb9df789 nl: fix accessing hairpin mode and isolated from the right attribute set
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 26 Jan 2023 19:44:21 +0000 (20:44 +0100)]
kernel: add fix for a page pool related crash on GRO
Needed for upcoming mt76 page pool support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 27 Jan 2023 10:40:46 +0000 (11:40 +0100)]
kernel: backport page pool fragment support from v5.15
Required for an upcoming mt76 update
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 27 Jan 2023 10:35:41 +0000 (11:35 +0100)]
mac80211: backport napi_build_skb for 5.10
It is needed for an upcoming mt76 update
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 27 Jan 2023 09:35:51 +0000 (10:35 +0100)]
ucode: update to the latest version
1c8df08824ef style: add .editorconfig file
ec167d39b803 nl80211: refactor command bitmask handling
6704ec0d5b29 nl80211: add support for registering an uloop based listener
48a6eac1da15 fs: implement `fs.pipe()`
f1be0d725735 types: fix array unshift operations and add test coverage
941d14837faf Merge pull request #138 from nbd168/nl80211
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Golle [Sun, 29 Jan 2023 03:42:15 +0000 (03:42 +0000)]
uboot-envtools: filogic: bpi-r3: fix env selection
Selecting the environment when booting from SD card has been broken by
a previous commit. Fix it.
Fixes: f46355b4d7 ("uboot-envtools: mediatek_filogic: fix BPi-R3 when no OS is installed")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 29 Jan 2023 03:40:15 +0000 (03:40 +0000)]
uboot-envtools: mt7622: bpi-r64: fix env selection
Selecting the environment when booting from SD card has been broken by
a previous commit. Fix it.
Fixes: 84b5b0f88c ("uboot-envtools: mediatek/mt7622: don't rely on mapped rootfs")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Chen Minqiang [Sun, 18 Dec 2022 00:59:44 +0000 (08:59 +0800)]
mediatek: fix wrong return code in platform_check_image()
Ensure that the platform_check_image() function returns an error code.
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
Chen Minqiang [Sun, 18 Dec 2022 00:57:20 +0000 (08:57 +0800)]
base-files: fix nand_do_platform_check fail
This change ensures compatibility with both types of sysupgrade-tar files.
1. For some boards like xiaomi,redmi-router-ax6s, sysupgrade-tar
is pack in directory `vendor,name/`
2. For some boards like xiaomi,mi-router-3g, sysupgrade-tar is pack
in directory `vendor_name/`
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
Andre Heider [Mon, 28 Nov 2022 10:17:43 +0000 (11:17 +0100)]
ucode: move to the lang submenu
Just as lua or the various languages from the package feed.
libucode is the exception, so move it to the libs menu instead.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Mon, 28 Nov 2022 09:06:07 +0000 (10:06 +0100)]
uhttpd: clean up Makefile
uhttpd's cmake options all default to ON. Either we set all of them or
none if the defaults need to be changed. Let's go with the latter.
Because support for all modules is always compiled in, remove two unused
and useless config toggles.
uhttpd detects and uses libcrypt itself, no need to add it here again.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Hauke Mehrtens [Tue, 27 Dec 2022 23:11:00 +0000 (00:11 +0100)]
px5g-mbedtls: Use getrandom()
Instead of accessing /dev/urandom use the getrandom syscall. This way we
do not have to keep the file open all the time.
This also fixes a compile error with glibc:
--------
px5g-mbedtls.c: In function '_urandom':
px5g-mbedtls.c:48:9: error: ignoring return value of 'read' declared with attribute 'warn_unused_result' [-Werror=unused-result]
48 | read(urandom_fd, out, len);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
--------
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Dmitry Sokolov [Sun, 15 Jan 2023 21:52:27 +0000 (02:52 +0500)]
ramips: mt7621: add support for Xiaomi Mi Router 4A Gigabit v2
Device is the same as Xiaomi Mi Router 4A Gigabit, except of:
- 5G WiFi is MT7663
- addresses of leds, wifi and eth ports are slightly changed
Specs:
SoC: MT7621
CPU: 2 x 880 MHz
ROM: 16 MB
RAM: 128 MB
WLAN: MT7603, MT7663
MAC addresses:
WAN **** factory 0xe006 (label)
LAN *:f7 factory 0xe000
2.4 GHz *:f8 factory 0x0000+0x4 (mtd-eeprom+0x4)
5 GHz *:f9 factory 0x8000+0x4 (mtd-eeprom+0x4)
Installation:
Factory firmware is based on a custom OpenWrt 17.x.
Installation is the same as for Xiaomi Mi Router 4A Gigabit.
Probably the easiest way to install is to use the script from
this repository: https://github.com/acecilia/OpenWRTInvasion/pull/155
In a more advanced case, you can do everything yourself:
- gain access to the device through one of the exploits described
in the link above
- upload sysupgrade image to /tmp
- overwrite stock firmware:
# mtd -e OS1 -r write /tmp/sysupgrade.bin OS1
Recovery:
Recovery procedure is the same as for Xiaomi Mi Router 4A Gigabit.
Possible options can be found here:
https://openwrt.org/inbox/toh/xiaomi/xiaomi_mi_router_4a_gigabit_edition
One of the ways is to use another router with OpenWrt:
- connect both routers by their LAN ports
- download stock firmware from [1]
- place it inside /tmp/test.bin on the main router
- configure PXE/TFTP on the main router
- power off 4Av2, hold Reset button, power on
- as soon as image download via TFTP starts, Reset can be released
- blinking blue wan LED will indicate the end of the flashing process,
now router can be rebooted
[1] http://cdn.cnbj1.fds.api.mi-img.com/xiaoqiang/rom/r4av2/miwifi_r4av2_firmware_release_2.30.28.bin
Signed-off-by: Dmitry Sokolov <e323w@proton.me>
Maxim Anisimov [Fri, 20 Jan 2023 11:23:40 +0000 (14:23 +0300)]
ramips: improve support for Zyxel Keenetic Extra II
- drop unneeded default-state for led_power
- concat firmware partitions to extend available free space
- increase spi flash frequency to 32 Mhz (value from stock firmware bootlog)
- drop broken-flash-reset because of onboard flash chip W25Q256FV has reset support
- add compatible for pcie wifi according to kernel documetation
- switch to wan mac address with offset 0x28 in rf-eeprom
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Maxim Anisimov [Fri, 20 Jan 2023 13:09:09 +0000 (16:09 +0300)]
ramips: use hex value in zyimage command for Keenetic KN-3010
This is cosmetic change. The hex value is related to the device
model and more human friendly.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Tom Herbers [Sat, 10 Sep 2022 14:45:42 +0000 (16:45 +0200)]
ath79: add LTE packages for GL-XE300
Add LTE packages required for operating the LTE modems shipped with
the GL-XE300.
Example configuration for an unauthenticated dual-stack APN:
network.wwan0=interface
network.wwan0.proto='qmi'
network.wwan0.device='/dev/cdc-wdm0'
network.wwan0.apn='internet'
network.wwan0.auth='none'
network.wwan0.delay='10'
network.wwan0.pdptype='IPV4V6'
Signed-off-by: Tom Herbers <mail@tomherbers.de>
Shiji Yang [Fri, 20 Jan 2023 03:16:33 +0000 (03:16 +0000)]
ath79: improve support for Letv LBA-047-CH
1. Convert wireless calibration data to NVMEM.
2. Enable control green status LED and change default LED behaviors.
The three LEDs of LBA-047-CH are in the same position, and the green
LED will be completely covered by the other two LEDs. So don's use
green LED as WAN indicator to ensure that only one LED is on at a time.
LED Factory OpenWrt
blue internet fail failsafe && upgrade
green internet okay run
red boot boot
3. Reduce the SPI clock to 30 MHz because the ath79 target does not
support 50 MHz SPI operation well. Keep the fast-read support to
ensure the spi-mem feature (
b3f9842330) is enabled.
4. Remove unused package "uboot-envtools".
5. Split the factory image into two parts: rootfs and kernel.
This change can reduce the factory image size and allow users to
upgrade the OpenWrt kernel loader uImage (OKLI) independently.
The new installation method: First, rename "squashfs-kernel.bin" to
"openwrt-ar71xx-generic-ap147-16M-kernel.bin" and rename "rootfs.bin"
to "openwrt-ar71xx-generic-ap147-16M-rootfs-squashfs.bin". Then we
can press reset button for about 5 seconds to enter tftp download mode.
Finally, set IP address to 192.168.67.100 and upload the above two
parts via tftp server.
Tested on Letv LBA-047-CH
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Edward Chow [Mon, 2 Jan 2023 11:24:20 +0000 (19:24 +0800)]
ath79: calibrate dlink dir-825 c1 and dir-835 a1 with nvmem
Driver for both soc (2.4GHz Wifi) and pci (5 GHz) now pull the calibration
data from the nvmem subsystem.
This allows us to move the userspace caldata extraction for the pci-e ath9k
supported wifi into the device-tree definition of the device.
Currently, "mac-address-ascii" cells only works for ethernet and wmac devices,
so PCI ath9k device uses the old method to calibrate.
Signed-off-by: Edward Chow <equu@openmail.cc>
Tony Butler [Wed, 7 Dec 2022 00:39:27 +0000 (16:39 -0800)]
kernel: add kmod-lib-842
"842" is a compression scheme and this is the software implementation
which is too slow to really use beyond a proof of concept. It can be
selected in ZRAM, ZSWAP, or `fs/pstore`, and is here for completeness.
In general you need a Power8 or better with 842-in-hardware for it to
be fast, but other 842-accelerators are emerging.
Signed-off-by: Tony Butler <spudz76@gmail.com>
Tom Herbers [Tue, 24 Jan 2023 13:14:58 +0000 (14:14 +0100)]
ath79: add label-mac-device for GL-XE300
This adds an label-mac-device alias which refrences the mac which is
printed on the Label of the device.
Signed-off-by: Tom Herbers <mail@tomherbers.de>
Daniel Groth [Sat, 14 Jan 2023 14:32:00 +0000 (15:32 +0100)]
realtek: dgs-1210-10mp: update sfp phy-handle
Adjust the wrong phy-handle definitions for the sfp ports so that they
match the correct switch ports.
Fixes: 89eb8b50d18d ("realtek: dgs-1210-10mp: add full sfp description")
Signed-off-by: Daniel Groth <flygarn12@gmail.com>
Michael Pratt [Fri, 13 Jan 2023 05:37:10 +0000 (00:37 -0500)]
ath79: add support for Senao Engenius EWS660AP
FCC ID: A8J-EWS660AP
Engenius EWS660AP is an outdoor wireless access point with
2 gigabit ethernet ports, dual-band wireless,
internal antenna plates, and 802.3at PoE+
**Specification:**
- QCA9558 SOC 2.4 GHz, 3x3
- QCA9880 WLAN mini PCIe card, 5 GHz, 3x3, 26dBm
- AR8035-A PHY RGMII GbE with PoE+ IN
- AR8033 PHY SGMII GbE with PoE+ OUT
- 40 MHz clock
- 16 MB FLASH MX25L12845EMI-10G
- 2x 64 MB RAM
- UART at J1 populated, RX grounded
- 6 internal antenna plates (5 dbi, omni-directional)
- 5 LEDs, 1 button (power, eth0, eth1, 2G, 5G) (reset)
**MAC addresses:**
Base MAC addressed labeled as "MAC"
Only one Vendor MAC address in flash
eth0 *:d4 MAC art 0x0
eth1 *:d5 --- art 0x0 +1
phy1 *:d6 --- art 0x0 +2
phy0 *:d7 --- art 0x0 +3
**Serial Access:**
the RX line on the board for UART is shorted to ground by resistor R176
therefore it must be removed to use the console
but it is not necessary to remove to view boot log
optionally, R175 can be replaced with a solder bridge short
the resistors R175 and R176 are next to the UART RX pin
**Installation:**
2 ways to flash factory.bin from OEM:
Method 1: Firmware upgrade page:
OEM webpage at 192.168.1.1
username and password "admin"
Navigate to "Firmware Upgrade" page from left pane
Click Browse and select the factory.bin image
Upload and verify checksum
Click Continue to confirm and wait 3 minutes
Method 2: Serial to load Failsafe webpage:
After connecting to serial console and rebooting...
Interrupt uboot with any key pressed rapidly
execute `run failsafe_boot` OR `bootm 0x9fd70000`
wait a minute
connect to ethernet and navigate to
"192.168.1.1/index.htm"
Select the factory.bin image and upload
wait about 3 minutes
**Return to OEM:**
If you have a serial cable, see Serial Failsafe instructions
otherwise, uboot-env can be used to make uboot load the failsafe image
ssh into openwrt and run
`fw_setenv rootfs_checksum 0`
reboot, wait 3 minutes
connect to ethernet and navigate to 192.168.1.1/index.htm
select OEM firmware image from Engenius and click upgrade
**TFTP recovery:**
Requires serial console, reset button does nothing
rename initramfs.bin to '
0101A8C0.img'
make available on TFTP server at 192.168.1.101
power board, interrupt boot
execute tftpboot and bootm 0x81000000
**Format of OEM firmware image:**
The OEM software of EWS660AP is a heavily modified version
of Openwrt Kamikaze. One of the many modifications
is to the sysupgrade program. Image verification is performed
simply by the successful ungzip and untar of the supplied file
and name check and header verification of the resulting contents.
To form a factory.bin that is accepted by OEM Openwrt build,
the kernel and rootfs must have specific names...
openwrt-ar71xx-generic-ews660ap-uImage-lzma.bin
openwrt-ar71xx-generic-ews660ap-root.squashfs
and begin with the respective headers (uImage, squashfs).
Then the files must be tarballed and gzipped.
The resulting binary is actually a tar.gz file in disguise.
This can be verified by using binwalk on the OEM firmware images,
ungzipping then untaring.
Newer EnGenius software requires more checks but their script
includes a way to skip them, otherwise the tar must include
a text file with the version and md5sums in a deprecated format.
The OEM upgrade script is at /etc/fwupgrade.sh.
OKLI kernel loader is required because the OEM software
expects the kernel to be no greater than 1536k
and the factory.bin upgrade procedure would otherwise
overwrite part of the kernel when writing rootfs.
Note on PLL-data cells:
The default PLL register values will not work
because of the external AR8035 switch between
the SOC and the ethernet port.
For QCA955x series, the PLL registers for eth0 and eth1
can be see in the DTSI as 0x28 and 0x48 respectively.
Therefore the PLL registers can be read from uboot
for each link speed after attempting tftpboot
or another network action using that link speed
with `md 0x18050028 1` and `md 0x18050048 1`.
The clock delay required for RGMII can be applied
at the PHY side, using the at803x driver `phy-mode`.
Therefore the PLL registers for GMAC0
do not need the bits for delay on the MAC side.
This is possible due to fixes in at803x driver
since Linux 5.1 and 5.3
Tested-by: Niklas Arnitz <openwrt@arnitz.email>
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Michael Pratt [Wed, 25 Jan 2023 18:02:56 +0000 (13:02 -0500)]
ath79: add pcie1 wifi device to Senao qca955x AP DTSI
Each individual device DTS now enables either pcie0 or pcie1.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Nick Hainke [Wed, 25 Jan 2023 08:07:51 +0000 (09:07 +0100)]
ethtool: update to 6.1
Release notes:
https://lore.kernel.org/netdev/
20221219225600.r54vejiqapn266cm@lion.mk-sys.cz/T/
Add patches fixing compilation:
- 100-uapi-Bring-in-if-h.patch
- 101-netlink-Fix-maybe-uninitialized-meters-variable.patch
- 102-raw-marvell-c-Fix-build-with-musl-libc.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Hauke Mehrtens [Sat, 28 Jan 2023 19:23:20 +0000 (20:23 +0100)]
relayd: bump to version 2023-01-28
f646ba4 route: Fix compile warning with glibc
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 22 Jan 2023 16:17:14 +0000 (17:17 +0100)]
pistachio: Cleanup kernel configuration
This removes some kernel configuration options which are not needed.
This brings the target closer to the OpenWrt standard configuration.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 28 Jan 2023 18:49:51 +0000 (19:49 +0100)]
realtek: Refresh kernel patches
Make the patches apply cleanly again.
Fixes: 4db8598e4296 ("realtek: Do not set KERNEL_ENTRY just to avoid NO_EXCEPT_FILL")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 28 Jan 2023 18:27:51 +0000 (19:27 +0100)]
uhttpd: update to latest Git HEAD
47561aa mimetypes: add audio/video support for apple airplay
6341357 ucode: respect all arguments passed to send()
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Olliver Schinagl [Sat, 28 Jan 2023 14:26:35 +0000 (15:26 +0100)]
realtek: timer: Fix cosmetic whitespace in comments
Comments are a bit weird in the timer driver, lets fix those.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Olliver Schinagl [Thu, 29 Dec 2022 10:27:54 +0000 (11:27 +0100)]
realtek: timer: Remove CEVT_RTL9300 completely
As the timer has been fixed now, we can drop the CEVT_RTL9300 timer all
together.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Olliver Schinagl [Wed, 14 Sep 2022 12:50:38 +0000 (14:50 +0200)]
realtek: timer: Activate for RTL930x devices
Use the new timer driver for the RTL930x devices.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
[remove old clock provider, select MIPS_EXTERNAL_TIMER and refresh
kernel config]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Sander Vanheule [Fri, 27 Jan 2023 22:35:47 +0000 (23:35 +0100)]
realtek: timer: Register enabled scheduler clock
Before calling sched_clock_register(), the timer used to drive the
scheduling clock should already be enabled. Otherwise the kernel log
will show strange time jumps during, and the watchdog might not be
pinged in a timely fashion, resulting in reboots.
[ 0.160281] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 78.104319] clocksource: Switched to clocksource realtek_otto_timer
Fixes: 3cc801117118 ("realtek: resurrect timer driver")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
David Bauer [Sat, 28 Jan 2023 12:50:17 +0000 (13:50 +0100)]
mac80211: use 802.11ax iw modes
This adds missing HE modes to mac80211_prepare_ht_modes.
Previously mesh without wpa_supplicant would be initialized with 802.11g
/NO-HT only, as this method did not parse channel bandwidth for HE
operation.
Signed-off-by: David Bauer <mail@david-bauer.net>
Zoltan HERPAI [Tue, 24 Jan 2023 18:34:22 +0000 (19:34 +0100)]
mxs: fix SD-card image generation for OLinuXino boards
Fixes: mxs: add generic subtarget (64ef920)
Adding the generic target caused the TARGET_BOOTFS_PARTSIZE to stay
hidden for these boards, crashing the FAT filesystem creation.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Olliver Schinagl [Tue, 24 Jan 2023 12:48:53 +0000 (13:48 +0100)]
realtek: eth: Fix missing end of comment marker
Because this comment is followed by another comment, nothing luckily
breaks, so only a cosmetic change.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Petr Štetiar [Thu, 26 Jan 2023 09:34:31 +0000 (10:34 +0100)]
ubus: update to version 2022-06-15
Update which contains just a following fix:
* ubusd: add lookup command queuing support
Defers and continues a client's lookup command to avoid unnecessary
buffering under load.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Wed, 11 Jan 2023 09:26:16 +0000 (10:26 +0100)]
ci: allow custom kernel and target jobs based on labels
Current job triggers based on matching of changed paths is quite
limited, so lets make it possible to additionally trigger manual CI jobs
by adding CI specific pull request build labels:
* `ci:target:x86:64` label is going to trigger CI target check jobs for
x86/64 (sub)target.
* `ci:kernel:x86:64` label is going to trigger CI kernel check jobs for
x86/64 (sub)target.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Nick Hainke [Wed, 25 Jan 2023 20:29:13 +0000 (21:29 +0100)]
linux-firmware: update to
20230117
Changes:
32d3199 linux-firmware: Update firmware file for Intel Bluetooth AX201
2da8a7a linux-firmware: Update firmware file for Intel Bluetooth AX201
8b5ddf4 linux-firmware: Update firmware file for Intel Bluetooth AX211
4219dac linux-firmware: Update firmware file for Intel Bluetooth AX211
fb34135 linux-firmware: Update firmware file for Intel Bluetooth AX210
becd3fc linux-firmware: Update firmware file for Intel Bluetooth AX200
7101c57 linux-firmware: Update firmware file for Intel Bluetooth AX201
49e87fa linux-firmware: Update firmware file for Intel Bluetooth 9560
86b73ce linux-firmware: Update firmware file for Intel Bluetooth 9260
3723b48 brcm: add configuration files for CyberTan WC121
7f626ef qcom: add firmware files for Adreno A200
fc5a25f rtw89: 8852c: update fw to v0.27.56.10
2ba1bea QCA: Add Bluetooth firmware for QCA2066
a1ad1d5 amdgpu: add VCN4.0.4 firmware from amd-5.4
9e01e17 amdgpu: add SMU13.0.7 firmware from amd-5.4
3a50eb8 amdgpu: add SDMA6.0.2 firmware from amd-5.4
19995fb amdgpu: add PSP13.0.7 firmware from amd-5.4
32e7c93 amdgpu: add GC11.0.2 firmware from amd-5.4
20c8060 amdgpu: add DCN3.2.1 firmware from amd-5.4
5c8e895 amdgpu: update VCN4.0.0 firmware from amd-5.4
66b3435 amdgpu: update SMU13.0.0 firmware from amd-5.4
604df78 amdgpu: update SDMA6.0.0 firmware from amd-5.4
3e9169a amdgpu: update PSP13.0.0 firmware from amd-5.4
bd1b7f7 amdgpu: update GC11.0.0 firmware from amd-5.4
c8ff1f4 iwlwifi: add new FWs from core76-35 release
5630963 iwlwifi: update cc/Qu/QuZ firmwares for core76-35 release
8bbec22 iwlwifi: add new FWs from core75-47 release
e20a687 iwlwifi: update 9000-family firmwares to core75-47
504b691 amdgpu: update renoir DMCUB firmware
1ed02d5 amdgpu: Update renoir PSP firmware
d0598c3 amdgpu: update copyright date for LICENSE.amdgpu
cee86df linux-firmware: update firmware for MT7921 WiFi device
e2d1174 linux-firmware: update firmware for MT7922 WiFi device
ce7cc73 linux-firmware: update firmware for mediatek bluetooth chip (MT7921)
91f4c6b linux-firmware: update firmware for mediatek bluetooth chip (MT7922)
52e62d6 cxgb4: Update firmware to revision 1.27.1.0
4704e25 qca: Update firmware files for BT chip WCN6750
c9c1958 rtw89: 8852c: update fw to v0.27.56.9
9e91f0c rtw89: 8852c: update fw to v0.27.56.8
Signed-off-by: Nick Hainke <vincent@systemli.org>
Shiji Yang [Thu, 19 Jan 2023 14:20:59 +0000 (14:20 +0000)]
ath79: add support for D-Link DIR-629 A1
Specifications:
SOC: QCA9588 CPU 720 MHz AHB 200 MHz
Switch: AR8236
RAM: 64 MiB DDR2-600
Flash: 8 MiB
WLAN: Wi-Fi4 2.4 GHz 3*3
LAN: LAN ports *4
WAN: WAN port *1
Buttons: reset *1 + wps *1
LEDs: ethernet *5, power, wlan, wps
MAC Address:
use address source
label 70:62:b8:xx:xx:96 lan && wlan
lan 70:62:b8:xx:xx:96 mfcdata@0x35
wan 70:62:b8:xx:xx:97 mfcdata@0x6a
wlan 70:62:b8:xx:xx:96 mfcdata@0x51
Install via Web UI:
Apply factory image in the stock firmware's Web UI.
Install via Emergency Room Mode:
DIR-629 A1 will enter recovery mode when the system fails to boot or
press reset button for about 10 seconds.
First, set IP address to 192.168.0.1 and server IP to 192.168.0.10.
Then we can open http://192.168.0.1 in the web browser to upload
OpenWrt factory image or stock firmware. Some modern browsers may
need to turn on compatibility mode.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Linhui Liu [Mon, 23 Jan 2023 12:15:36 +0000 (20:15 +0800)]
firmware: intel-microcode: update to
20221108
Changelog:
* New Microcodes:
sig 0x000606c1, pf_mask 0x10, 2022-08-07, rev 0x1000201, size 286720
sig 0x000b0671, pf_mask 0x32, 2022-09-07, rev 0x010e, size 204800
* Updated Microcodes:
sig 0x000706e5, pf_mask 0x80, 2022-08-02, rev 0x00b6, size 113664
sig 0x000806c1, pf_mask 0x80, 2022-06-28, rev 0x00a6, size 110592
sig 0x000806d1, pf_mask 0xc2, 2022-06-28, rev 0x0042, size 102400
sig 0x000806ec, pf_mask 0x94, 2022-07-31, rev 0x00f4, size 105472
sig 0x00090661, pf_mask 0x01, 2022-07-15, rev 0x0017, size 20480
sig 0x00090672, pf_mask 0x07, 2022-09-19, rev 0x0026, size 218112
sig 0x00090675, pf_mask 0x07, 2022-09-19, rev 0x0026
sig 0x000b06f2, pf_mask 0x07, 2022-09-19, rev 0x0026
sig 0x000b06f5, pf_mask 0x07, 2022-09-19, rev 0x0026
sig 0x000906a3, pf_mask 0x80, 2022-09-19, rev 0x0424, size 217088
sig 0x000906a4, pf_mask 0x80, 2022-09-19, rev 0x0424
sig 0x000906ed, pf_mask 0x22, 2022-07-31, rev 0x00f4, size 104448
sig 0x000a0652, pf_mask 0x20, 2022-07-31, rev 0x00f4, size 96256
sig 0x000a0653, pf_mask 0x22, 2022-07-31, rev 0x00f4, size 97280
sig 0x000a0655, pf_mask 0x22, 2022-07-31, rev 0x00f4, size 96256
sig 0x000a0660, pf_mask 0x80, 2022-07-31, rev 0x00f4, size 97280
sig 0x000a0661, pf_mask 0x80, 2022-07-31, rev 0x00f4, size 96256
sig 0x000a0671, pf_mask 0x02, 2022-08-02, rev 0x0056, size 103424
We need to update to this version because
https://ftp.debian.org/debian/pool/non-free/i/intel-microcode/intel-microcode_3.
20220809.1.tar.xz
has been removed.
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Nick Hainke [Tue, 24 Jan 2023 23:22:01 +0000 (00:22 +0100)]
tcpdump: update to 4.99.3
Changes:
https://git.tcpdump.org/tcpdump/blob/
032e4923e5202ea4d5a6d1cead83ed1927135874:/CHANGES
Signed-off-by: Nick Hainke <vincent@systemli.org>
John Audia [Tue, 24 Jan 2023 12:43:03 +0000 (07:43 -0500)]
kernel: bump 5.15 to 5.15.90
All patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
Sander Vanheule [Wed, 25 Jan 2023 21:18:42 +0000 (22:18 +0100)]
realtek: rtl931x: drop LINKER_LOAD_ADDRESS bypass
RTL931x kernel builds were patched to bypass the LINKER_LOAD_ADDRESS
parameter, and hardcode it to 0x80220000. This doesn't make much sense,
since value of LINKER_LOAD_ADDRESS, load-ld, only appears to be a copy
of load-y, adjusted to the linker's taste.
Dropping the hacks for bypassing LINKER_LOAD_ADDRESS results in a kernel
that actually starts booting on an RTL9313 (Netgear MS510TXM), but
currently still hangs when the kernel switches timers.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Wenli Looi [Mon, 23 Jan 2023 18:37:07 +0000 (18:37 +0000)]
ath79: convert Netgear EX7300 caldata to nvmem
Transition to specify caldata in the DTS.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Wenli Looi [Tue, 22 Nov 2022 18:34:37 +0000 (18:34 +0000)]
ath79: consolidate Netgear EX7300 series images
This change consolidates Netgear EX7300 series devices into two images
corresponding to devices that share the same manufacturer firmware
image. Similar to the manufacturer firmware, the actual device model is
detected at runtime. The logic is taken from the netgear GPL dumps in a
file called generate_board_conf.sh.
Hardware details for EX7300 v2 variants
---------------------------------------
SoC: QCN5502
Flash: 16 MiB
RAM: 128 MiB
Ethernet: 1 gigabit port
Wireless 2.4GHz (currently unsupported due to lack of ath9k support):
- EX6250 / EX6400 v2 / EX6410 / EX6420: QCN5502 3x3
- EX7300 v2 / EX7320: QCN5502 4x4
Wireless 5GHz:
- EX6250: QCA9986 3x3 (detected by ath10k as QCA9984 3x3)
- EX6400 v2 / EX6410 / EX6420 / EX7300 v2 / EX7320: QCA9984 4x4
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Wenli Looi [Tue, 22 Nov 2022 18:26:34 +0000 (18:26 +0000)]
build: add ALT3 and ALT4 vendor/model/variant
This is needed for the Netgear EX7300 series v2.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Christian Marangi [Tue, 24 Jan 2023 22:23:56 +0000 (23:23 +0100)]
CI: push-containers: limit to one concurrent run
We may find in a situation where due the queue an old run finish after
the last run, resulting in the containers getting overwritten with an
old version.
Limit the push-containers workflow to one concurrent run and cancel any
run in progress.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Linhui Liu [Sun, 22 Jan 2023 07:23:00 +0000 (15:23 +0800)]
tools/cmake: update to 3.25.2
Release Notes:
https://cmake.org/cmake/help/latest/release/3.25.html#id2
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Nick Hainke [Sat, 29 Oct 2022 08:22:36 +0000 (10:22 +0200)]
tools/ninja: update to 1.11.1
Release Notes:
https://github.com/ninja-build/ninja/releases/tag/v1.11.1
Sync the "100-make_jobserver_support.patch" with the PR:
https://github.com/ninja-build/ninja/pull/1140
Signed-off-by: Nick Hainke <vincent@systemli.org>
projects / openwrt / staging / wigyori.git / log