openwrt/staging/blogic.git
7 years agonet: ena: increase ena driver version to 1.3.0
Netanel Belgazal [Tue, 17 Oct 2017 07:34:01 +0000 (07:34 +0000)]
net: ena: increase ena driver version to 1.3.0

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ena: add new admin define for future support of IPv6 RSS
Netanel Belgazal [Tue, 17 Oct 2017 07:34:00 +0000 (07:34 +0000)]
net: ena: add new admin define for future support of IPv6 RSS

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ena: add statistics for missed tx packets
Netanel Belgazal [Tue, 17 Oct 2017 07:33:59 +0000 (07:33 +0000)]
net: ena: add statistics for missed tx packets

Add a new statistic to ethtool stats that show the number of packets
without transmit acknowledgement from ENA device.

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ena: add power management ops to the ENA driver
Netanel Belgazal [Tue, 17 Oct 2017 07:33:58 +0000 (07:33 +0000)]
net: ena: add power management ops to the ENA driver

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ena: remove legacy suspend suspend/resume support
Netanel Belgazal [Tue, 17 Oct 2017 07:33:57 +0000 (07:33 +0000)]
net: ena: remove legacy suspend suspend/resume support

Remove ena_device_io_suspend/resume() methods
Those methods were intend to be used by the device to trigger
suspend/resume but eventually it was dropped.

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ena: improve ENA driver boot time.
Netanel Belgazal [Tue, 17 Oct 2017 07:33:56 +0000 (07:33 +0000)]
net: ena: improve ENA driver boot time.

The ena admin commands timeout is in resolutions of 100ms.
Therefore, When the driver works in polling mode, it sleeps for 100ms
each time. The overall boot time of the ENA driver is ~1.5 sec.
To reduce the boot time, This change modifies the granularity of
the sleeps to 5ms.
This change improves the boot time to 220ms.

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMAINTAINERS: change ENA driver maintainers email domain
Netanel Belgazal [Tue, 17 Oct 2017 07:30:34 +0000 (07:30 +0000)]
MAINTAINERS: change ENA driver maintainers email domain

ENA driver was developed by developers from Annapurna Labs.
Annapurna Labs was acquired by Amazon and the company's domain
(@annapurnalabs.com) will become deprecated soon.

Update the email addresses of the maintainers to the alternative amazon
emails (@amazon.com)

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoqed: Fix iWARP out of order flow
Michal Kalderon [Tue, 17 Oct 2017 07:23:25 +0000 (10:23 +0300)]
qed: Fix iWARP out of order flow

Out of order flow is not working for iWARP.
This patch got cut out from initial series that added out
of order support for iWARP.

Make out of order code common for iWARP and iSCSI.
Add new configuration option CONFIG_QED_OOO. Set by
qedr and qedi Kconfigs.

Fixes: d1abfd0b4ee2 ("qed: Add iWARP out of order support")
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: hns3: Add mqprio hardware offload support in hns3 driver
Yunsheng Lin [Tue, 17 Oct 2017 06:51:30 +0000 (14:51 +0800)]
net: hns3: Add mqprio hardware offload support in hns3 driver

When using tc qdisc, dcb_ops->setup_tc is used to tell hclge_dcb
module to do the tm related setup. Only TC_MQPRIO_MODE_CHANNEL
offload mode is supported.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agomacvlan/macvtap: Add support for L2 forwarding offloads with macvtap
Alexander Duyck [Tue, 17 Oct 2017 02:44:44 +0000 (22:44 -0400)]
macvlan/macvtap: Add support for L2 forwarding offloads with macvtap

This patch reverts earlier commit b13ba1b83f52 ("macvlan: forbid L2
fowarding offload for macvtap"). The reason for reverting this is because
the original patch no longer fixes what it previously did as the
underlying structure has changed for macvtap. Specifically macvtap
originally pulled packets directly off of the lowerdev. However in commit
6acf54f1cf0a ("macvtap: Add support of packet capture on macvtap device.")
that code was changed and instead macvtap would listen directly on the
macvtap device itself instead of the lower device. As such, the L2
forwarding offload should now be able to provide a performance advantage of
skipping the checks on the lower dev while not introducing any sort of
regression.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next...
David S. Miller [Thu, 19 Oct 2017 10:44:36 +0000 (11:44 +0100)]
Merge branch '40GbE' of git://git./linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2017-10-17

This series contains updates to i40e and ethtool.

Alan provides most of the changes in this series which are mainly fixes
and cleanups.  Renamed the ethtool "cmd" variable to "ks", since the new
ethtool API passes us ksettings structs instead of command structs.
Cleaned up an ifdef that was not accomplishing anything.  Added function
header comments to provide better documentation.  Fixed two issues in
i40e_get_link_ksettings(), by calling
ethtool_link_ksettings_zero_link_mode() to ensure the advertising and
link masks are cleared before we start setting bits.  Cleaned up and fixed
code comments which were incorrect.  Separated the setting of autoneg in
i40e_phy_types_to_ethtool() into its own conditional to clarify what PHYs
support and advertise autoneg, and makes it easier to add new PHY types in
the future.  Added ethtool functionality to intersect two link masks
together to find the common ground between them.  Overhauled i40e to
ensure that the new ethtool API macros are being used, instead of the
old ones.  Fixed the usage of unsigned 64-bit division which is not
supported on all architectures.

Sudheer adds support for 25G Active Optical Cables (AOC) and Active Copper
Cables (ACC) PHY types.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agotcp: fix tcp_xmit_retransmit_queue() after rbtree introduction
Eric Dumazet [Tue, 17 Oct 2017 02:38:35 +0000 (19:38 -0700)]
tcp: fix tcp_xmit_retransmit_queue() after rbtree introduction

I tried to hard avoiding a call to rb_first() (via tcp_rtx_queue_head)
in tcp_xmit_retransmit_queue(). But this was probably too bold.

Quoting Yuchung :

We might miss re-arming the RTO if tp->retransmit_skb_hint is not NULL.
This can happen when RACK marks the first packet lost again and resets
tp->retransmit_skb_hint for example (tcp_rack_mark_skb_lost())

Fixes: 75c119afe14f ("tcp: implement rb-tree based retransmit queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'bpf-ctx-info-out-of-verifier'
David S. Miller [Wed, 18 Oct 2017 13:17:11 +0000 (14:17 +0100)]
Merge branch 'bpf-ctx-info-out-of-verifier'

Jakub Kicinski says:

====================
bpf: move context info out of the verifier

Daniel pointed out during the review of my previous patchset that
the knowledge about context doesn't really belong directly in the
verifier.  This patch set takes a bit of a drastic approach to
move the info out of there.  I want to be able to use different
set of verifier_ops for program analysis.  To do that, I have
to first move the test_run callback to a separate structure.  Then
verifier ops can be declared in the verifier directly and
different sets can be picked for verification vs analysis.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agobpf: allow access to skb->len from offloads
Jakub Kicinski [Mon, 16 Oct 2017 23:40:56 +0000 (16:40 -0700)]
bpf: allow access to skb->len from offloads

Since we are now doing strict checking of what offloads
may access, make sure skb->len is on that list.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agobpf: move knowledge about post-translation offsets out of verifier
Jakub Kicinski [Mon, 16 Oct 2017 23:40:55 +0000 (16:40 -0700)]
bpf: move knowledge about post-translation offsets out of verifier

Use the fact that verifier ops are now separate from program
ops to define a separate set of callbacks for verification of
already translated programs.

Since we expect the analyzer ops to be defined only for
a small subset of all program types initialize their array
by hand (don't use linux/bpf_types.h).

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agobpf: remove the verifier ops from program structure
Jakub Kicinski [Mon, 16 Oct 2017 23:40:54 +0000 (16:40 -0700)]
bpf: remove the verifier ops from program structure

Since the verifier ops don't have to be associated with
the program for its entire lifetime we can move it to
verifier's struct bpf_verifier_env.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agobpf: split verifier and program ops
Jakub Kicinski [Mon, 16 Oct 2017 23:40:53 +0000 (16:40 -0700)]
bpf: split verifier and program ops

struct bpf_verifier_ops contains both verifier ops and operations
used later during program's lifetime (test_run).  Split the runtime
ops into a different structure.

BPF_PROG_TYPE() will now append ## _prog_ops or ## _verifier_ops
to the names.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agotcp: Check daddr_cache before use in tracepoint
David Ahern [Mon, 16 Oct 2017 22:32:07 +0000 (15:32 -0700)]
tcp: Check daddr_cache before use in tracepoint

Running perf in one window to capture tcp_retransmit_skb tracepoint:
    $ perf record -e tcp:tcp_retransmit_skb -a

And causing a retransmission on an active TCP session (e.g., dropping
packets in the receiver, changing MTU on the interface to 500 and back
to 1500) triggers a panic:

[   58.543144] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[   58.545300] IP: perf_trace_tcp_retransmit_skb+0xd0/0x145
[   58.546770] PGD 0 P4D 0
[   58.547472] Oops: 0000 [#1] SMP
[   58.548328] Modules linked in: vrf
[   58.549262] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.0-rc4+ #26
[   58.551004] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[   58.554560] task: ffffffff81a0e540 task.stack: ffffffff81a00000
[   58.555817] RIP: 0010:perf_trace_tcp_retransmit_skb+0xd0/0x145
[   58.557137] RSP: 0018:ffff88003fc03d68 EFLAGS: 00010282
[   58.558292] RAX: 0000000000000000 RBX: ffffe8ffffc0ec80 RCX: ffff880038543098
[   58.559850] RDX: 0400000000000000 RSI: ffff88003fc03d70 RDI: ffff88003fc14b68
[   58.561099] RBP: ffff88003fc03da8 R08: 0000000000000000 R09: ffffea0000d3224a
[   58.562005] R10: ffff88003fc03db8 R11: 0000000000000010 R12: ffff8800385428c0
[   58.562930] R13: ffffe8ffffc0e478 R14: ffffffff81a93a40 R15: ffff88003d4f0c00
[   58.563845] FS:  0000000000000000(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
[   58.564873] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   58.565613] CR2: 0000000000000008 CR3: 000000003d68f004 CR4: 00000000000606f0
[   58.566538] Call Trace:
[   58.566865]  <IRQ>
[   58.567140]  __tcp_retransmit_skb+0x4ab/0x4c6
[   58.567704]  ? tcp_set_ca_state+0x22/0x3f
[   58.568231]  tcp_retransmit_skb+0x14/0xa3
[   58.568754]  tcp_retransmit_timer+0x472/0x5e3
[   58.569324]  ? tcp_write_timer_handler+0x1e9/0x1e9
[   58.569946]  tcp_write_timer_handler+0x95/0x1e9
[   58.570548]  tcp_write_timer+0x2a/0x58

Check that daddr_cache is non-NULL before de-referencing.

Fixes: e086101b150a ("tcp: add a tracepoint for tcp retransmission")
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ipx: mark expected switch fall-through
Gustavo A. R. Silva [Mon, 16 Oct 2017 21:53:16 +0000 (16:53 -0500)]
net: ipx: mark expected switch fall-through

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoipv6: mark expected switch fall-throughs
Gustavo A. R. Silva [Mon, 16 Oct 2017 21:36:52 +0000 (16:36 -0500)]
ipv6: mark expected switch fall-throughs

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Notice that in some cases I placed the "fall through" comment
on its own line, which is what GCC is expecting to find.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agotcp: Use pI6c in tcp tracepoint
David Ahern [Mon, 16 Oct 2017 21:24:02 +0000 (14:24 -0700)]
tcp: Use pI6c in tcp tracepoint

The compact form for IPv6 addresses is more user friendly than the full
version. For example:
   compact: 2001:db8:1::1
      full: 2001:0db8:0001:0000:0000:0000:0000:0004i

Update the tcp tracepoint to show the compact form.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoipv4: mark expected switch fall-throughs
Gustavo A. R. Silva [Mon, 16 Oct 2017 20:48:55 +0000 (15:48 -0500)]
ipv4: mark expected switch fall-throughs

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Notice that in some cases I placed the "fall through" comment
on its own line, which is what GCC is expecting to find.

Addresses-Coverity-ID: 115108
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agodecnet: af_decnet: mark expected switch fall-throughs
Gustavo A. R. Silva [Mon, 16 Oct 2017 20:11:22 +0000 (15:11 -0500)]
decnet: af_decnet: mark expected switch fall-throughs

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'DSA-DPAA'
David S. Miller [Wed, 18 Oct 2017 12:44:47 +0000 (13:44 +0100)]
Merge branch 'DSA-DPAA'

Madalin Bucur says:

====================
adapt DPAA drivers for DSA

Junote Cai reported that he was not able to get a DSA setup involving the
DPAA/FMAN driver to work and narrowed it down to of_find_net_device_by_node()
call in DSA setup. The initial attempt to fix this by adding of_node to the
platform device results in a second, failed, probing of the FMan MAC driver
against the new platform device created for the DPAA Ethernet driver.
Solve these issues by removing the of_node pointer from the platform device
and changing the net_dev dev to the of_device dev to ensure the DSA init
will be able to find the DPAA net_dev using of_find_net_device_by_node().
Several changes were required to enable this solution: refactoring the
adjust_link (also resulted in lesser, cleaner code) and renaming the fman
kernel modules to keep the legacy udev rules happy.

Changes in v2:

 - fix issue on error path in "dpaa_eth: change device used" patch
 - cleanup the dpaa_eth_probe() error paths

Changes in v3:

 - remove obsolete comment in moved code
 - add explanation for module rename
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agodpaa_eth: remove obsolete comment
Madalin Bucur [Mon, 16 Oct 2017 18:36:10 +0000 (21:36 +0300)]
dpaa_eth: remove obsolete comment

Comment is no longer valid for a long time now.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agofsl/fman: add dpaa in module names
Madalin Bucur [Mon, 16 Oct 2017 18:36:09 +0000 (21:36 +0300)]
fsl/fman: add dpaa in module names

This change just renames the FMan driver modules, using a common prefix
for the DPAA FMan and DPAA Ethernet drivers. Besides making the names more
aligned, this allows writing udev rules that match on either driver name,
if needed, using the fsl_dpaa_* prefix. The change of netdev dev required
for the DSA probing makes the previous rules written using this prefix
fail, this change makes them work again, ensuring backwards compatibility
for their users.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agodpaa_eth: cleanup dpaa_eth_probe() error paths
Madalin Bucur [Mon, 16 Oct 2017 18:36:08 +0000 (21:36 +0300)]
dpaa_eth: cleanup dpaa_eth_probe() error paths

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agodpaa_eth: change device used
Madalin Bucur [Mon, 16 Oct 2017 18:36:07 +0000 (21:36 +0300)]
dpaa_eth: change device used

Change device used for DMA mapping to the MAC device that is an
of_device, with proper DMA ops. Using this device for the netdevice
should also address the issue with DSA scenarios that need the
netdevice to be backed by an of_device.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agodpaa_eth: move of_phy_connect() to the eth driver
Madalin Bucur [Mon, 16 Oct 2017 18:36:06 +0000 (21:36 +0300)]
dpaa_eth: move of_phy_connect() to the eth driver

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agofsl/fman: remove of_node
Madalin Bucur [Mon, 16 Oct 2017 18:36:05 +0000 (21:36 +0300)]
fsl/fman: remove of_node

The FMan MAC driver allocates a platform device for the Ethernet
driver to probe on. Setting pdev->dev.of_node with the MAC node
triggers the MAC driver probing of the new platform device. While
this fails quickly and does not affect the functionality of the
drivers, it is incorrect and must be removed. This was added to
address a report that DSA code using of_find_net_device_by_node()
is unable to use the DPAA interfaces. Error message seen before
this fix:

fsl_mac dpaa-ethernet.0: __devm_request_mem_region(mac) failed
fsl_mac: probe of dpaa-ethernet.0 failed with error -16

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agotools: bpftool: use more common tag format
Jakub Kicinski [Mon, 16 Oct 2017 17:12:54 +0000 (10:12 -0700)]
tools: bpftool: use more common tag format

Program tag is usually displayed as string of bytes without
any separators (e.g. as "aa5520b1090cfeb6" vs MAC addr-like
format bpftool uses currently: "aa:55:20:b1:09:0c:fe:b6").
Make bptfool use the more common format both for displaying
the tag and selecting the program by tag.

This was pointed out in review but I misunderstood the comment.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'networking-Convert-timers-to-use-timer_setup'
David S. Miller [Wed, 18 Oct 2017 11:40:40 +0000 (12:40 +0100)]
Merge branch 'networking-Convert-timers-to-use-timer_setup'

Kees Cook says:

====================
networking: Convert timers to use timer_setup()

This is the current set of outstanding networking patches to perform
conversions to the new timer interface (rebased to -next). This is not
all expected conversions, but it contains everything needed in networking
to eliminate init_timer(), and all the non-standard setup_*_timer() uses.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agosunrpc: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:42 +0000 (17:29 -0700)]
sunrpc: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-nfs@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoipv4: timewait: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:41 +0000 (17:29 -0700)]
ipv4: timewait: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoum: net: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:40 +0000 (17:29 -0700)]
um: net: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. (Note that this timer is actually
disabled.)

Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: user-mode-linux-user@lists.sourceforge.net
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: fs_enet: Remove unused timer
Kees Cook [Tue, 17 Oct 2017 00:29:39 +0000 (17:29 -0700)]
net: fs_enet: Remove unused timer

Removes unused timer and its old initialization call.

Cc: Pantelis Antoniou <pantelis.antoniou@gmail.com>
Cc: Vitaly Bordug <vbordug@ru.mvista.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/xen-netback: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:38 +0000 (17:29 -0700)]
net/xen-netback: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Paul Durrant <paul.durrant@citrix.com>
Cc: xen-devel@lists.xenproject.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: atm: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:37 +0000 (17:29 -0700)]
net: atm: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Also drops a redundant initialization
that is already set up by DEFINE_TIMER.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: "Reshetova, Elena" <elena.reshetova@intel.com>
Cc: Bhumika Goyal <bhumirks@gmail.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Augusto Mecking Caringi <augustocaringi@gmail.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/core: Convert sk_timer users to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:36 +0000 (17:29 -0700)]
net/core: Convert sk_timer users to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly for all users of sk_timer.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: linzhang <xiaolou4617@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-hams@vger.kernel.org
Cc: linux-x25@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoethernet/intel: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:35 +0000 (17:29 -0700)]
ethernet/intel: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Switches test of .data field to
.function, since .data will be going away.

Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: hns: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:34 +0000 (17:29 -0700)]
net: hns: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Switches test of .data field to
.function, since .data will be going away.

Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: lipeng <lipeng321@huawei.com>
Cc: Lin Yun Sheng <linyunsheng@huawei.com>
Cc: Kejian Yan <yankejian@huawei.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: neterion: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:33 +0000 (17:29 -0700)]
net: neterion: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Jon Mason <jdmason@kudzu.us>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: usb: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:32 +0000 (17:29 -0700)]
net: usb: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Philippe Reynes <tremyfr@gmail.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: "Bjørn Mork" <bjorn@mork.no>
Cc: "Stefan Brüns" <stefan.bruens@rwth-aachen.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: linux-usb@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/ethernet/sgi: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:31 +0000 (17:29 -0700)]
net/ethernet/sgi: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agohamradio/scc: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:30 +0000 (17:29 -0700)]
hamradio/scc: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Joerg Reuter <jreuter@yaina.de>
Cc: linux-hams@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: seeq: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:29 +0000 (17:29 -0700)]
net: seeq: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ethernet: sun: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:28 +0000 (17:29 -0700)]
net: ethernet: sun: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Philippe Reynes <tremyfr@gmail.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Shannon Nelson <shannon.nelson@oracle.com>
Cc: Rob Herring <robh@kernel.org>
Cc: chris hyser <chris.hyser@oracle.com>
Cc: Tushar Dave <tushar.n.dave@oracle.com>
Cc: Tobias Klauser <tklauser@distanz.ch>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ethernet: apple: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:27 +0000 (17:29 -0700)]
net: ethernet: apple: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoisdnloop: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:26 +0000 (17:29 -0700)]
isdnloop: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Added missing initialization for
rb_timer.

Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agodrivers/net/appletalk: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:24 +0000 (17:29 -0700)]
drivers/net/appletalk: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Adds a static variable to hold the
polled net_device.

Cc: David Howells <dhowells@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoappletalk: Remove unneeded synchronization
Kees Cook [Tue, 17 Oct 2017 00:29:23 +0000 (17:29 -0700)]
appletalk: Remove unneeded synchronization

The use of del_timer_sync() will make sure a timer is not rescheduled.
As such, there is no need to add external signals to kill timers. In
preparation for switching the timer callback argument to the timer
pointer, this drops the .data argument since it doesn't serve a meaningful
purpose here.

Cc: David Howells <dhowells@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agohdlc: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:22 +0000 (17:29 -0700)]
hdlc: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. This adds a pointer back to the
net_device, and drops needless open-coded resetting of the .function and
.data fields.

Cc: David S. Miller <davem@davemloft.net>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/core: Collapse redundant sk_timer callback data assignments
Kees Cook [Tue, 17 Oct 2017 00:29:21 +0000 (17:29 -0700)]
net/core: Collapse redundant sk_timer callback data assignments

The core sk_timer initializer can provide the common .data assignment
instead of it being set separately in users.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: linzhang <xiaolou4617@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-hams@vger.kernel.org
Cc: linux-x25@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoinet: frags: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:20 +0000 (17:29 -0700)]
inet: frags: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Stefan Schmidt <stefan@osg.samsung.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: Florian Westphal <fw@strlen.de>
Cc: linux-wpan@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: netfilter-devel@vger.kernel.org
Cc: coreteam@netfilter.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Stefan Schmidt <stefan@osg.samsung.com> # for ieee802154
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoinet/connection_sock: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:19 +0000 (17:29 -0700)]
inet/connection_sock: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: netdev@vger.kernel.org
Cc: dccp@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonetfilter: ipset: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:18 +0000 (17:29 -0700)]
netfilter: ipset: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. This introduces a pointer back to the
struct ip_set, which is used instead of the struct timer_list .data field.

Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: Florian Westphal <fw@strlen.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: simran singhal <singhalsimran0@gmail.com>
Cc: Muhammad Falak R Wani <falakreyaz@gmail.com>
Cc: netfilter-devel@vger.kernel.org
Cc: coreteam@netfilter.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: sched: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:17 +0000 (17:29 -0700)]
net: sched: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Add pointer back to Qdisc.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoisdn/gigaset: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:16 +0000 (17:29 -0700)]
isdn/gigaset: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johan Hovold <johan@kernel.org>
Cc: gigaset307x-common@lists.sourceforge.net
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoisdn/gigaset: Use kzalloc instead of open-coded field zeroing
Kees Cook [Tue, 17 Oct 2017 00:29:15 +0000 (17:29 -0700)]
isdn/gigaset: Use kzalloc instead of open-coded field zeroing

This replaces a kmalloc followed by a bunch of per-field zeroing with a
single kzalloc call, reducing the lines of code.

Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johan Hovold <johan@kernel.org>
Cc: gigaset307x-common@lists.sourceforge.net
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agomISDN: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:14 +0000 (17:29 -0700)]
mISDN: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Geliang Tang <geliangtang@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Vasilyev <vasilyev@ispras.ru>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoforcedeth: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:13 +0000 (17:29 -0700)]
forcedeth: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Zhu Yanjun <yanjun.zhu@oracle.com>
Cc: Philippe Reynes <tremyfr@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ksz884x: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:12 +0000 (17:29 -0700)]
net: ksz884x: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Philippe Reynes <tremyfr@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: dl2k: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:11 +0000 (17:29 -0700)]
net: dl2k: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Tobias Klauser <tklauser@distanz.ch>
Cc: Philippe Reynes <tremyfr@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agobna: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:10 +0000 (17:29 -0700)]
bna: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Rasesh Mody <rasesh.mody@cavium.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@cavium.com>
Cc: Dept-GELinuxNICDev@cavium.com
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: amd8111e: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:09 +0000 (17:29 -0700)]
net: amd8111e: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Philippe Reynes <tremyfr@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agochelsio: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:08 +0000 (17:29 -0700)]
chelsio: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agodrivers/net/3com: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:07 +0000 (17:29 -0700)]
drivers/net/3com: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: can: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:06 +0000 (17:29 -0700)]
net: can: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: tulip: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:05 +0000 (17:29 -0700)]
net: tulip: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Philippe Reynes <tremyfr@gmail.com>
Cc: "yuval.shaia@oracle.com" <yuval.shaia@oracle.com>
Cc: netdev@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoatm: idt77252: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:04 +0000 (17:29 -0700)]
atm: idt77252: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. This required adding a pointer back
to vc_map, and adjusting the locking around removal a bit.

Cc: Chas Williams <3chas3@gmail.com>
Cc: linux-atm-general@lists.sourceforge.net
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agodrivers/atm/suni: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:03 +0000 (17:29 -0700)]
drivers/atm/suni: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Passes NULL timer when doing non-
timer call.

Cc: Chas Williams <3chas3@gmail.com>
Cc: linux-atm-general@lists.sourceforge.net
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: vxge: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:02 +0000 (17:29 -0700)]
net: vxge: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Jon Mason <jdmason@kudzu.us>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: stephen hemminger <stephen@networkplumber.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/cw1200: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:01 +0000 (17:29 -0700)]
net/cw1200: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Solomon Peachy <pizza@shaftnet.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ethernet: stmmac: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:29:00 +0000 (17:29 -0700)]
net: ethernet: stmmac: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agopcmcia/electra_cf: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:28:59 +0000 (17:28 -0700)]
pcmcia/electra_cf: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linux-pcmcia@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: tulip: de2104x: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:28:58 +0000 (17:28 -0700)]
net: tulip: de2104x: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: "yuval.shaia@oracle.com" <yuval.shaia@oracle.com>
Cc: Tobias Klauser <tklauser@distanz.ch>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Philippe Reynes <tremyfr@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoethernet/broadcom: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:28:57 +0000 (17:28 -0700)]
ethernet/broadcom: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
helper to pass the timer pointer explicitly.

Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoxfrm: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:28:56 +0000 (17:28 -0700)]
xfrm: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
helper to pass the timer pointer explicitly.

Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/hamradio/6pack: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:28:55 +0000 (17:28 -0700)]
net/hamradio/6pack: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: linux-hams@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoisdn/hisax: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:28:54 +0000 (17:28 -0700)]
isdn/hisax: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Geliang Tang <geliangtang@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/wireless/ray_cs: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:28:52 +0000 (17:28 -0700)]
net/wireless/ray_cs: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/usb/usbnet: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:28:51 +0000 (17:28 -0700)]
net/usb/usbnet: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Since the callback is called from
both a timer and a tasklet, adjust the tasklet to pass the timer address
too. When tasklets have their .data field removed, this can be refactored
to call a central function after resolving the correct container_of() for a
separate callback function for timer and tasklet.

Cc: Oliver Neukum <oneukum@suse.com>
Cc: netdev@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/ti/tlan: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:28:50 +0000 (17:28 -0700)]
net/ti/tlan: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Samuel Chessman <chessman@tux.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/rose: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:28:47 +0000 (17:28 -0700)]
net/rose: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-hams@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/lapb: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:28:46 +0000 (17:28 -0700)]
net/lapb: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: "Reshetova, Elena" <elena.reshetova@intel.com>
Cc: linux-x25@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/decnet: Convert timers to use timer_setup()
Kees Cook [Tue, 17 Oct 2017 00:28:45 +0000 (17:28 -0700)]
net/decnet: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: linux-decnet-user@lists.sourceforge.net
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'dsa-master-and-slave-helpers'
David S. Miller [Wed, 18 Oct 2017 11:24:34 +0000 (12:24 +0100)]
Merge branch 'dsa-master-and-slave-helpers'

Vivien Didelot says:

====================
net: dsa: master and slave helpers

This patch series adds a few helpers to DSA core for clarity and
readability but brings no functional changes.

A dsa_slave_notify helper calls the DSA notifiers when (un)registering a
slave device.

Most of the DSA slave code only needs to access the dsa_port structure,
not the dsa_slave_priv (which only contains a few PHY-specific members).
Thus a dsa_slave_to_port helper returns a dsa_port structure of a slave
device.

A dsa_slave_to_master returns the master device of a slave device.

After that the netdev member of the dsa_port structure is split into two
explicit master and slave members to avoid confusion, and a dsa_to_port
helper is added for switch drivers to get a const reference to a port.

Changes in v2:
  - prefer dsa_slave_to_master instead of dsa_slave_get_master
  - rename dsa_master_get_slave to dsa_master_find_slave
  - pack master and slave net devices into an anonymous union
  - add dsa_to_port public helper for switch drivers
  - add Reviewed-by tags from Florian
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: dsa: add dsa_to_port helper
Vivien Didelot [Mon, 16 Oct 2017 15:12:19 +0000 (11:12 -0400)]
net: dsa: add dsa_to_port helper

The dsa_port structure is part of DSA core data and must only be updated
by the later. It is OK and sometimes necessary for the DSA drivers to
access this data, but this has to be read only.

For that purpose, add a dsa_to_port() helper which returns a const
pointer to a dsa_port structure which must be used by DSA drivers from
now on instead of digging into ds->ports[] themselves.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: dsa: split dsa_port's netdev member
Vivien Didelot [Mon, 16 Oct 2017 15:12:18 +0000 (11:12 -0400)]
net: dsa: split dsa_port's netdev member

The dsa_port structure has a "netdev" member, which can be used for
either the master device, or the slave device, depending on its type.

It is true that today, CPU port are not exposed to userspace, thus the
port's netdev member can be used to point to its master interface.

But it is still slightly confusing, so split it into more explicit
"master" and "slave" members inside an anonymous union.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: dsa: rename dsa_master_get_slave
Vivien Didelot [Mon, 16 Oct 2017 15:12:17 +0000 (11:12 -0400)]
net: dsa: rename dsa_master_get_slave

The dsa_master_get_slave is slightly confusing since the idiomatic "get"
term often suggests reference counting, in symmetry to "put".

Rename it to dsa_master_find_slave to make the look up operation clear.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: dsa: add slave to master helper
Vivien Didelot [Mon, 16 Oct 2017 15:12:16 +0000 (11:12 -0400)]
net: dsa: add slave to master helper

Many part of the DSA slave code require to get the master device
assigned to a slave device. Remove dsa_master_netdev() in favor of a
dsa_slave_to_master() helper which does that.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: dsa: add slave to port helper
Vivien Didelot [Mon, 16 Oct 2017 15:12:15 +0000 (11:12 -0400)]
net: dsa: add slave to port helper

Many portions of DSA core code require to get the dsa_port structure
corresponding to a slave net_device. For this purpose, introduce a
dsa_slave_to_port() helper.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: dsa: add slave notify helper
Vivien Didelot [Mon, 16 Oct 2017 15:12:14 +0000 (11:12 -0400)]
net: dsa: add slave notify helper

Both DSA slave create and destroy functions call call_dsa_notifiers with
respectively DSA_PORT_REGISTER and DSA_PORT_UNREGISTER and the same
dsa_notifier_register_info structure.

Wrap this in a dsa_slave_notify helper so prevent cluttering these
functions.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: dsa: use port's cpu_dp when creating a slave
Vivien Didelot [Mon, 16 Oct 2017 15:12:13 +0000 (11:12 -0400)]
net: dsa: use port's cpu_dp when creating a slave

When dsa_slave_create is called, the related port already has a CPU port
assigned to it, available in its cpu_dp member. Use it instead of the
unique tree cpu_dp.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonetlink: use NETLINK_CB(in_skb).sk instead of looking it up
Johannes Berg [Mon, 16 Oct 2017 14:57:49 +0000 (16:57 +0200)]
netlink: use NETLINK_CB(in_skb).sk instead of looking it up

When netlink_ack() reports an allocation error to the sending
socket, there's no need to look up the sending socket since
it's available in the SKB's CB. Use that instead of going to
the trouble of looking it up.

Note that the pointer is only available since Eric Biederman's
commit 3fbc290540a1 ("netlink: Make the sending netlink socket availabe in NETLINK_CB")
which is far newer than the original lookup code (Oct 2003)
(though the field was called 'ssk' in that commit and only got
renamed to 'sk' later, I'd actually argue 'ssk' was better - or
perhaps it should've been 'source_sk' - since there are so many
different 'sk's involved.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'bpf-cpumap-type-for-XDP_REDIRECT'
David S. Miller [Wed, 18 Oct 2017 11:12:19 +0000 (12:12 +0100)]
Merge branch 'bpf-cpumap-type-for-XDP_REDIRECT'

Jesper Dangaard Brouer says:

====================
net: New bpf cpumap type for XDP_REDIRECT

Introducing a new way to redirect XDP frames.  Notice how no driver
changes are necessary given the design of XDP_REDIRECT.

This redirect map type is called 'cpumap', as it allows redirection
XDP frames to remote CPUs.  The remote CPU will do the SKB allocation
and start the network stack invocation on that CPU.

This is a scalability and isolation mechanism, that allow separating
the early driver network XDP layer, from the rest of the netstack, and
assigning dedicated CPUs for this stage.  The sysadm control/configure
the RX-CPU to NIC-RX queue (as usual) via procfs smp_affinity and how
many queues are configured via ethtool --set-channels.  Benchmarks
show that a single CPU can handle approx 11Mpps.  Thus, only assigning
two NIC RX-queues (and two CPUs) is sufficient for handling 10Gbit/s
wirespeed smallest packet 14.88Mpps.  Reducing the number of queues
have the advantage that more packets being "bulk" available per hard
interrupt[1].

[1] https://www.netdevconf.org/2.1/papers/BusyPollingNextGen.pdf

Use-cases:

1. End-host based pre-filtering for DDoS mitigation.  This is fast
   enough to allow software to see and filter all packets wirespeed.
   Thus, no packets getting silently dropped by hardware.

2. Given NIC HW unevenly distributes packets across RX queue, this
   mechanism can be used for redistribution load across CPUs.  This
   usually happens when HW is unaware of a new protocol.  This
   resembles RPS (Receive Packet Steering), just faster, but with more
   responsibility placed on the BPF program for correct steering.

3. Auto-scaling or power saving via only activating the appropriate
   number of remote CPUs for handling the current load.  The cpumap
   tracepoints can function as a feedback loop for this purpose.

In V7, a --stress-mode was implemented for the samples program, which
between each stats update, adds + removes CPUs from the map
concurrently with traffic.  I did find and fix some concurrency issues
in the tear-down path, details in patch desc.  The stress test have
now been running for 15 hours without any issues, while being
bombarded with 11.6 Mpps via pktgen_sample04_many_flows.sh.

See individual patches for patchset-version changes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agosamples/bpf: add cpumap sample program xdp_redirect_cpu
Jesper Dangaard Brouer [Mon, 16 Oct 2017 10:19:49 +0000 (12:19 +0200)]
samples/bpf: add cpumap sample program xdp_redirect_cpu

This sample program show how to use cpumap and the associated
tracepoints.

It provides command line stats, which shows how the XDP-RX process,
cpumap-enqueue and cpumap kthread dequeue is cooperating on a per CPU
basis.  It also utilize the xdp_exception and xdp_redirect_err
transpoints to allow users quickly to identify setup issues.

One issue with ixgbe driver is that the driver reset the link when
loading XDP.  This reset the procfs smp_affinity settings.  Thus,
after loading the program, these must be reconfigured.  The easiest
workaround it to reduce the RX-queue to e.g. two via:

 # ethtool --set-channels ixgbe1 combined 2

And then add CPUs above 0 and 1, like:

 # xdp_redirect_cpu --dev ixgbe1 --prog 2 --cpu 2 --cpu 3 --cpu 4

Another issue with ixgbe is that the page recycle mechanism is tied to
the RX-ring size.  And the default setting of 512 elements is too
small.  This is the same issue with regular devmap XDP_REDIRECT.
To overcome this I've been using 1024 rx-ring size:

 # ethtool -G ixgbe1 rx 1024 tx 1024

V3:
 - whitespace cleanups
 - bpf tracepoint cannot access top part of struct

V4:
 - report on kthread sched events, according to tracepoint change
 - report average bulk enqueue size

V5:
 - bpf_map_lookup_elem on cpumap not allowed from bpf_prog
   use separate map to mark CPUs not available

V6:
 - correct kthread sched summary output

V7:
 - Added a --stress-mode for concurrently changing underlying cpumap

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agobpf: cpumap add tracepoints
Jesper Dangaard Brouer [Mon, 16 Oct 2017 10:19:44 +0000 (12:19 +0200)]
bpf: cpumap add tracepoints

This adds two tracepoint to the cpumap.  One for the enqueue side
trace_xdp_cpumap_enqueue() and one for the kthread dequeue side
trace_xdp_cpumap_kthread().

To mitigate the tracepoint overhead, these are invoked during the
enqueue/dequeue bulking phases, thus amortizing the cost.

The obvious use-cases are for debugging and monitoring.  The
non-intuitive use-case is using these as a feedback loop to know the
system load.  One can imagine auto-scaling by reducing, adding or
activating more worker CPUs on demand.

V4: tracepoint remove time_limit info, instead add sched info

V8: intro struct bpf_cpu_map_entry members cpu+map_id in this patch

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agobpf: cpumap xdp_buff to skb conversion and allocation
Jesper Dangaard Brouer [Mon, 16 Oct 2017 10:19:39 +0000 (12:19 +0200)]
bpf: cpumap xdp_buff to skb conversion and allocation

This patch makes cpumap functional, by adding SKB allocation and
invoking the network stack on the dequeuing CPU.

For constructing the SKB on the remote CPU, the xdp_buff in converted
into a struct xdp_pkt, and it mapped into the top headroom of the
packet, to avoid allocating separate mem.  For now, struct xdp_pkt is
just a cpumap internal data structure, with info carried between
enqueue to dequeue.

If a driver doesn't have enough headroom it is simply dropped, with
return code -EOVERFLOW.  This will be picked up the xdp tracepoint
infrastructure, to allow users to catch this.

V2: take into account xdp->data_meta

V4:
 - Drop busypoll tricks, keeping it more simple.
 - Skip RPS and Generic-XDP-recursive-reinjection, suggested by Alexei

V5: correct RCU read protection around __netif_receive_skb_core.

V6: Setting TASK_RUNNING vs TASK_INTERRUPTIBLE based on talk with Rik van Riel

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agobpf: XDP_REDIRECT enable use of cpumap
Jesper Dangaard Brouer [Mon, 16 Oct 2017 10:19:34 +0000 (12:19 +0200)]
bpf: XDP_REDIRECT enable use of cpumap

This patch connects cpumap to the xdp_do_redirect_map infrastructure.

Still no SKB allocation are done yet.  The XDP frames are transferred
to the other CPU, but they are simply refcnt decremented on the remote
CPU.  This served as a good benchmark for measuring the overhead of
remote refcnt decrement.  If driver page recycle cache is not
efficient then this, exposes a bottleneck in the page allocator.

A shout-out to MST's ptr_ring, which is the secret behind is being so
efficient to transfer memory pointers between CPUs, without constantly
bouncing cache-lines between CPUs.

V3: Handle !CONFIG_BPF_SYSCALL pointed out by kbuild test robot.

V4: Make Generic-XDP aware of cpumap type, but don't allow redirect yet,
 as implementation require a separate upstream discussion.

V5:
 - Fix a maybe-uninitialized pointed out by kbuild test robot.
 - Restrict bpf-prog side access to cpumap, open when use-cases appear
 - Implement cpu_map_enqueue() as a more simple void pointer enqueue

V6:
 - Allow cpumap type for usage in helper bpf_redirect_map,
   general bpf-prog side restriction moved to earlier patch.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>