Gabor Juhos [Tue, 5 Nov 2013 16:31:14 +0000 (16:31 +0000)]
ar71xx: generate recovery image for WNDR4300
Extended the Makefile to generate a working factory reset image
for Netgear WNDR4300. The image uses UBI with two volumes squashfs
(rootfs) and JFFS2 (rootfs_data). In order to make stock U-Boot
happy, a fake rootfs image is placed into the last erase block
of the kernel partition.
Signed-off-by: Stefan Agner <stefan@agner.ch>
[juhosg:
- restore the NetgearNAND/initramfs macro,
- remove unused {Squash,Ubi}fsTemplate macros,
- remove board specific mtd options from CONFIG_CMDLINE, append the
board specific ubi.mtd parameter to the kernel command line instead,
- increase kernel partition size to 2MiB,
- use board specific ini file for ubinize,
- put jffs2 eof mark into the rootfs_data ubi volume,
- use KDIR_TMP for temporary images,
- use the squashfs-raw image,
- increase kernel partition size to 2MiB,
- use a local ubinize macro,
- fix macro parameter comments,
- put the fake rootfs into the last erase block of the kernel
partition,
- move Image/Build/NetgearNAND/buildkernel macro before
define Image/Build/NetgearNAND,
- don't use the wndr3700 utility, use '-M' parameter of mkimage to set
the uImage magic,
- use '-recovery' suffix for the generated image, it is only usable via
the fw_recovery function of the bootloader,
- update commit log]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38655
Gabor Juhos [Tue, 5 Nov 2013 16:31:12 +0000 (16:31 +0000)]
package/ubox: fix jffs2 handling on MTD devices emulated by gluebi
The jffs2_ready() function in mount_root.c checks
the presence of various JFFS2 markers at the start
of a given MTD device. The function works on NOR
flashes because JFFS2 puts 'cleanmarker' nodes at
the start of freshly erased blocks.
However if jffs2 is used on a MTD device emulated
by the gluebi layer, the 'cleanmarker' nodes are
not present and the jffs2_ready() function fails.
Update the code to handle jffs2 correctly even on
MTD devices emulated by the gluebi layer.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38654
Gabor Juhos [Tue, 5 Nov 2013 08:25:45 +0000 (08:25 +0000)]
kernel: update 3.10 to 3.10.18
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38652
Luka Perkov [Tue, 5 Nov 2013 08:00:34 +0000 (08:00 +0000)]
sunxi: add new target
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38651
Luka Perkov [Tue, 5 Nov 2013 08:00:30 +0000 (08:00 +0000)]
imx6: drop unused variable from Makefile
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38650
Luka Perkov [Tue, 5 Nov 2013 08:00:24 +0000 (08:00 +0000)]
include: add more CPU flags for arm
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38649
Jo-Philipp Wich [Mon, 4 Nov 2013 22:40:56 +0000 (22:40 +0000)]
dnsmasq: fix backward compatibility with existing configs
Changeset r36943 ("dnsmasq: use host-record instead of address") removed
the automatic domain expansion for config domain sections, this breaks
existing setups and alters the old behaviour in unexpected ways, therfore
restore behaviour of the current stable release.
Additionally handle fully qualified hostnames properly when setting up the
own hostrecord by stripping the local domain part form the given name
instead of unconditionally appending it, so that "example.lan" results
in "example example.lan" and not "example.lan example.lan.lan".
SVN-Revision: 38648
Gabor Juhos [Mon, 4 Nov 2013 18:37:09 +0000 (18:37 +0000)]
ar71xx: move WNDR4300 profile to the nand subtarget
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38647
Gabor Juhos [Mon, 4 Nov 2013 18:37:08 +0000 (18:37 +0000)]
ar71xx: Add new subtarget nand for WNDR4300
Add new subtarget nand with UBI/UBIFS including GLUEBI and squashfs.
This target will be used for NAND based router which make use of
UBI (and maybe UBIFS later on) in order to provide proper NAND
support.
Signed-off-by: Stefan Agner <stefan@agner.ch>
[juhosg:
- tweak target.mk:
change BOARDNAME variable,
improve Target/Description,
remove targz and ubifs from FEATURES and add broken flag,
- optimize kernel configuration:
disable ubifs, it is not used yet,
disable unused MTD options,
disable SPI support
disable unused network drivers,
tune kernel command line,
- remove image/ubinize.cfg, it will be in a follow-up patch
- move profile modifications into a separate patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38646
Gabor Juhos [Mon, 4 Nov 2013 18:37:07 +0000 (18:37 +0000)]
ar71xx: remove yaffs from the generic rootfstype list
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38645
Gabor Juhos [Mon, 4 Nov 2013 18:37:06 +0000 (18:37 +0000)]
ar71xx: image: dd root.* images in fs specific macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38644
Gabor Juhos [Mon, 4 Nov 2013 18:37:05 +0000 (18:37 +0000)]
kernel/3.1[02]: move MTD root device setup code to mtdcore
The current code only allows to automatically set
root device on MTD partitions. Move the code to MTD
core to allow to use it with all MTD devices.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38643
Gabor Juhos [Mon, 4 Nov 2013 18:37:03 +0000 (18:37 +0000)]
kernel: refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38642
Hauke Mehrtens [Sun, 3 Nov 2013 20:20:14 +0000 (20:20 +0000)]
kernel: add some config options
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38640
Hauke Mehrtens [Sun, 3 Nov 2013 20:18:45 +0000 (20:18 +0000)]
kernel: fix dependencies of kmod-thermal
This depends on kmod-hwmon-core
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38639
Hauke Mehrtens [Sun, 3 Nov 2013 20:17:52 +0000 (20:17 +0000)]
kernel: fix dependencies of usb-eth-gadget
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38638
Hauke Mehrtens [Sun, 3 Nov 2013 19:24:39 +0000 (19:24 +0000)]
kernel: bgmac: update backport patch
This adds some more bgmac patches from mainline kernel.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38637
Gabor Juhos [Fri, 1 Nov 2013 18:33:24 +0000 (18:33 +0000)]
ar71xx: image: only define profiles for the generic subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38636
Gabor Juhos [Fri, 1 Nov 2013 18:33:22 +0000 (18:33 +0000)]
ar71xx: image: add IMAGE_PROFILE variable
Ensures that the 'Default' images are generated
even if the subtarget has no profiles.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38635
Gabor Juhos [Fri, 1 Nov 2013 18:33:18 +0000 (18:33 +0000)]
ar71xx: always enable hw ecc support for the ar934x-nfc module
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38634
Hauke Mehrtens [Fri, 1 Nov 2013 08:49:35 +0000 (08:49 +0000)]
kernel: add missing config options
The buildbots found some new missing config options.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38633
Felix Fietkau [Thu, 31 Oct 2013 17:36:24 +0000 (17:36 +0000)]
openvpn: clean up and fix the init script
- clean up duplication of procd instance handling code
- using --cd *after* --config is rather pointless
- to be able to log errors properly, --syslog needs to be passed before --config
- tell procd about the generated or referenced config file instead of
the uci file. this avoids having to restart all instances if only one
of them changes.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38632
Luka Perkov [Thu, 31 Oct 2013 12:04:04 +0000 (12:04 +0000)]
kirkwood: add userland support for Pogoplug E02
This patch adds the userland support for the Pogoplug E02 by Cloud
Engines, Inc.
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 38631
Luka Perkov [Thu, 31 Oct 2013 12:04:02 +0000 (12:04 +0000)]
kirkwood: add Pogoplug E02 Kernel support
This patch adds a DTS file for the Pogoplug E02 by Cloud Engines, Inc.
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 38630
Luka Perkov [Thu, 31 Oct 2013 11:44:28 +0000 (11:44 +0000)]
kirkwood: extend image/Makefile
* use lower case letters in generated images
* extend support for boot/ directory
* fix some typos
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 38629
Luka Perkov [Thu, 31 Oct 2013 11:44:27 +0000 (11:44 +0000)]
imx6: minor image cleanup
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38628
Felix Fietkau [Thu, 31 Oct 2013 11:22:01 +0000 (11:22 +0000)]
netifd: update to the latest version, fixes regression in proto-shell scripts (#14400, #14402)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38627
Imre Kaloz [Thu, 31 Oct 2013 10:57:46 +0000 (10:57 +0000)]
use a single package to build MLO/u-boot for all omap boards
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38626
Luka Perkov [Thu, 31 Oct 2013 00:00:51 +0000 (00:00 +0000)]
uboot-imx6: update to 2013.10
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38625
Luka Perkov [Wed, 30 Oct 2013 23:31:26 +0000 (23:31 +0000)]
imx6: update patches
Changes include PCI fixes and various upstream pending patches.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38624
Jo-Philipp Wich [Wed, 30 Oct 2013 15:16:59 +0000 (15:16 +0000)]
cyassl: drop obsolete patches
SVN-Revision: 38610
Jo-Philipp Wich [Wed, 30 Oct 2013 13:19:48 +0000 (13:19 +0000)]
cyassl: upgrade to v2.8.0
Un-reverts the previous update commit and forward-ports the patch
to improve legacy SSLv2 handshake handling.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 38609
Felix Fietkau [Wed, 30 Oct 2013 12:56:47 +0000 (12:56 +0000)]
ustream-ssl: update to the latest version, adds support for the current cyassl version (#14386)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38608
Felix Fietkau [Wed, 30 Oct 2013 11:25:05 +0000 (11:25 +0000)]
libubox: update to latest version, makes jshn roughly twice as fast
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38607
Felix Fietkau [Wed, 30 Oct 2013 11:25:01 +0000 (11:25 +0000)]
netifd: update to latest version, adds fixes and some preparation for supporting wifi devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38606
Hauke Mehrtens [Wed, 30 Oct 2013 09:50:13 +0000 (09:50 +0000)]
kernel: add missing dependency for kernel 3.12 in tg3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38605
Hauke Mehrtens [Wed, 30 Oct 2013 09:48:19 +0000 (09:48 +0000)]
kernel: add some missing config options
This was spotted by the buildbots.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38604
Gabor Juhos [Wed, 30 Oct 2013 07:06:24 +0000 (07:06 +0000)]
ramips: enable building of TEW-692GR images
The TEW-692GR images are missing since r36169. Uncomment
the board specific macro in image/Makefile, in order to
generate those again.
Only build tested. No idea if the the image works or not,
I have bricked my TEW-692GR a few months ago.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38603
Gabor Juhos [Wed, 30 Oct 2013 07:06:23 +0000 (07:06 +0000)]
ramips: fix number of GPIOs for RT3352
The RT3352 SoC only supports 46 GPIO lines.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38602
Gabor Juhos [Wed, 30 Oct 2013 07:06:22 +0000 (07:06 +0000)]
ramips: remove trailing whitespaces from .dts{,i} files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38601
Gabor Juhos [Wed, 30 Oct 2013 06:54:59 +0000 (06:54 +0000)]
ar71xx: move subtarget specific features to target.mk
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38600
Gabor Juhos [Wed, 30 Oct 2013 06:54:56 +0000 (06:54 +0000)]
uboot-ar71xx: make it depend on the generic ar71xx subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38599
Gabor Juhos [Wed, 30 Oct 2013 06:54:55 +0000 (06:54 +0000)]
ar71xx: don't build uImages for the mikrotik subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38598
Gabor Juhos [Wed, 30 Oct 2013 06:54:54 +0000 (06:54 +0000)]
ar71xx: disable non Mikrotik boards in the mikrotik subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38597
Gabor Juhos [Wed, 30 Oct 2013 06:54:53 +0000 (06:54 +0000)]
ar71xx: fix Kconfig symbol selection for RB95x/RB2011
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38596
Gabor Juhos [Wed, 30 Oct 2013 06:51:02 +0000 (06:51 +0000)]
ar71xx: move CONFIG_MTD_NAND_AR934X_HW_ECC option to subtarget config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38595
Gabor Juhos [Wed, 30 Oct 2013 06:51:01 +0000 (06:51 +0000)]
generic: mtdsplit_uimage: add uImage magic for the WRN2200 board
Should fix boot failure on the WNR2200 boards.
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38594
Gabor Juhos [Wed, 30 Oct 2013 06:50:59 +0000 (06:50 +0000)]
ar71xx: add profile and build image for the BXU2000n-2 A1 board
Patchwork: http://patchwork.openwrt.org/patch/4183/
Signed-off-by: Terry Yang <yangbo@bhunetworks.com>
[juhosg:
- remove MultiProfile, it makes no sense for a single board
- move SingleProfile call and the mtdlayout to a different
location keep things sorted (well, almost)]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38593
Gabor Juhos [Wed, 30 Oct 2013 06:50:58 +0000 (06:50 +0000)]
ar71xx: add user-space support for the BXU2000n-2 A1 board
Patchwork: http://patchwork.openwrt.org/patch/4183/
Signed-off-by: Terry Yang <yangbo@bhunetworks.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38592
Gabor Juhos [Wed, 30 Oct 2013 06:50:57 +0000 (06:50 +0000)]
ar71xx: add kernel support for BHU Networks BXU2000n-2 A1 board
BXU2000n-2 A1 is a BHU Networks WLAN board, use ar9341 chip.
Patchwork: http://patchwork.openwrt.org/patch/4183/
Signed-off-by: Terry Yang <yangbo@bhunetworks.com>
[juhosg:
- rename and refresh kernel patch,
- fix some checkpatch warnings and adjust whitespaces in
mach-bhu-bxu2000n2-a.c]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38591
Gabor Juhos [Wed, 30 Oct 2013 06:50:55 +0000 (06:50 +0000)]
ar71xx: add user space support for the Sitecom WLR-8100 wireless router
Patchwork: http://patchwork.openwrt.org/patch/4148/
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38590
Gabor Juhos [Wed, 30 Oct 2013 06:50:54 +0000 (06:50 +0000)]
ar71xx: add kernel support for the Sitecom WLR-8100 wireless router
- unsure about copyright message
- based on AP136-010
Patchwork: http://patchwork.openwrt.org/patch/4147/
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
[juhosg: rename and refresh kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38589
Gabor Juhos [Wed, 30 Oct 2013 06:50:53 +0000 (06:50 +0000)]
ar71xx: add profile and build image for the Dragino2 board
Patchwork: http://patchwork.openwrt.org/patch/4234/
Signed-off-by: Pau Escrich <p4u@dabax.net>
[juhosg: remove kernel+rootfs partition and use uimage split instead]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38588
Gabor Juhos [Wed, 30 Oct 2013 06:50:52 +0000 (06:50 +0000)]
ar71xx: add kernel support for DRAGINO2
This patch adds support for DRAGINO2 board (used by
Meshpotato v2). Most of the files included can be
found in the official svn repository provided by the
company [1]. I have just adapt it to the last OpenWrt
trunk revision (Fri Oct 4 10:49:47 2013).
1. http://svn.dragino.com/dragino2
Patchwork: http://patchwork.openwrt.org/patch/4234/
Signed-off-by: Pau Escrich <p4u@dabax.net>
[juhosg:
- rename and refresh kernel patch,
- fix checkpatch warnings in mach-dragino2.c]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38587
Luka Perkov [Wed, 30 Oct 2013 00:50:14 +0000 (00:50 +0000)]
imx6: update gateworks profile with extra packages
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38579
Felix Fietkau [Tue, 29 Oct 2013 14:12:06 +0000 (14:12 +0000)]
libubox: update to latest version, adds minor improvements to jshn, blobmsg and uloop
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38578
Steven Barth [Tue, 29 Oct 2013 13:23:28 +0000 (13:23 +0000)]
odhcp6c: Multiple improvements and fixes
* Various RFC compliance fixes (thanks to Hans Dedecker)
* Fix RA spam filter logic causing ipv6 connection issues
* Fix parameters -F and -P being order dependent
SVN-Revision: 38577
Jo-Philipp Wich [Tue, 29 Oct 2013 09:53:48 +0000 (09:53 +0000)]
Revert "[cyassl]: upgrade to 2.8.0"
Reverts the CyaSSL version bump for now since the update completely broke
trunk building due to incompatible changes in the IO callback API which in
turn breaks the core ustream-ssl package.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 38576
Luka Perkov [Tue, 29 Oct 2013 02:52:17 +0000 (02:52 +0000)]
kernel: add w1-master-mxc module
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38575
Luka Perkov [Tue, 29 Oct 2013 02:19:09 +0000 (02:19 +0000)]
imx6: add initial 3.12 support
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38574
Luka Perkov [Tue, 29 Oct 2013 02:19:07 +0000 (02:19 +0000)]
imx6: use upstream gateworks board names
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38573
Luka Perkov [Tue, 29 Oct 2013 02:19:05 +0000 (02:19 +0000)]
kernel: refresh 3.12 patches on -rc7 release
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38572
Luka Perkov [Tue, 29 Oct 2013 02:19:03 +0000 (02:19 +0000)]
imx6: update 3.10 patches
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38571
Hauke Mehrtens [Mon, 28 Oct 2013 19:19:28 +0000 (19:19 +0000)]
kernel: add missing config optinons
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38570
Felix Fietkau [Mon, 28 Oct 2013 16:06:47 +0000 (16:06 +0000)]
kernel: jffs2: ignore bad blocks after the end-of-filesystem marker
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38568
Felix Fietkau [Mon, 28 Oct 2013 15:15:35 +0000 (15:15 +0000)]
uClibc: get rid of bogus unused strlcpy definition to fix build errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38567
Felix Fietkau [Mon, 28 Oct 2013 15:15:31 +0000 (15:15 +0000)]
toolchain/gdb: remove use of extern inline to fix build errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38566
Felix Fietkau [Mon, 28 Oct 2013 15:15:28 +0000 (15:15 +0000)]
mtd-utils: get rid of extern inline to fix build errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38565
Felix Fietkau [Mon, 28 Oct 2013 15:15:24 +0000 (15:15 +0000)]
e2fsprogs: update to 1.42.8, fixes a build error
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38564
Felix Fietkau [Mon, 28 Oct 2013 15:15:20 +0000 (15:15 +0000)]
squashfs: make inline functions static to fix build errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38563
Felix Fietkau [Mon, 28 Oct 2013 15:15:16 +0000 (15:15 +0000)]
squashfs4: make inline functions static to fix build errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38562
Felix Fietkau [Mon, 28 Oct 2013 15:15:12 +0000 (15:15 +0000)]
pkg-config: update to latest version, fix build on Mac OS X 10.9
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38561
Felix Fietkau [Mon, 28 Oct 2013 15:15:09 +0000 (15:15 +0000)]
build: fix build on Mac OS X 10.9
Add a wrapper around the clang gcc emulation to fix -print-file-name=<lib>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38560
Felix Fietkau [Mon, 28 Oct 2013 15:15:05 +0000 (15:15 +0000)]
u-boot: prefer mirror2.openwrt.org over ftp.denx.de - the denx ftp is slow and unreliable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38559
Imre Kaloz [Mon, 28 Oct 2013 14:34:59 +0000 (14:34 +0000)]
upgrade to 2.8.0
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38558
John Crispin [Mon, 28 Oct 2013 13:45:57 +0000 (13:45 +0000)]
gpio-button-hotplug: add support for power buttons
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38557
John Crispin [Mon, 28 Oct 2013 06:48:04 +0000 (06:48 +0000)]
ubox: update to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38554
John Crispin [Mon, 28 Oct 2013 06:47:56 +0000 (06:47 +0000)]
ralink: add package for mt7620 sdhci
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38553
John Crispin [Mon, 28 Oct 2013 06:47:48 +0000 (06:47 +0000)]
ralink: dont include mt7620 sdhci support inside the kernel
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38552
John Crispin [Mon, 28 Oct 2013 06:47:39 +0000 (06:47 +0000)]
ralink: add support for missing mt7620 mux values
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38551
John Crispin [Mon, 28 Oct 2013 06:47:31 +0000 (06:47 +0000)]
ralink: add support for 2 new mt7620 boards made by buffalo
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38550
John Crispin [Mon, 28 Oct 2013 06:47:20 +0000 (06:47 +0000)]
kernel: add packages for sdhci support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38549
Luka Perkov [Sun, 27 Oct 2013 20:47:04 +0000 (20:47 +0000)]
kernel: fix compile error in 3.12
Upstream commit
c655bc6896b94ee0223393f26155c6daf1e2d148 changed number of
arguments in nf_ct_iterate_cleanup() function.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38547
Luka Perkov [Sun, 27 Oct 2013 20:46:55 +0000 (20:46 +0000)]
kernel: add missing 3.12 config symbols
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38546
Luka Perkov [Sun, 27 Oct 2013 16:08:23 +0000 (16:08 +0000)]
mvebu: drop patch that has been upstreamed
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38545
John Crispin [Sat, 26 Oct 2013 12:25:11 +0000 (12:25 +0000)]
ubox: update to latest git head
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38541
John Crispin [Sat, 26 Oct 2013 12:24:55 +0000 (12:24 +0000)]
ralink: pinctrl fix for non muxed pins
Pins with no mux option failed to be recognized as gpios.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38540
Hauke Mehrtens [Fri, 25 Oct 2013 21:12:48 +0000 (21:12 +0000)]
brcm47xx: b44: fix error handling for dummy phy creation
When the mdio bus is unregistered the newly created phy will also be
unregistered and freed.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38539
Hauke Mehrtens [Fri, 25 Oct 2013 21:02:13 +0000 (21:02 +0000)]
brcm47xx: b44: add dummy phy device if we do not find any
On some devices with e.g. a BCM2535F switch the second MAC is used, but
we can not find a phy under all addresses between 0 and 31, 0xffffffff
is returned as phy id. If we can not find a phy at the expected address
create a dummy one.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38538
Luka Perkov [Fri, 25 Oct 2013 10:29:49 +0000 (10:29 +0000)]
kernel: add keyboard-imx module
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38537
Florian Fainelli [Fri, 25 Oct 2013 01:48:29 +0000 (01:48 +0000)]
malta: add kernel configuration for 3.12
Boot tested using QEMU
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38536
Florian Fainelli [Fri, 25 Oct 2013 01:48:20 +0000 (01:48 +0000)]
kernel: handle Cavium Octeon Kconfig rename
Upstream commit
9ddebc46 ("MIPS: OCTEON: Rename Kconfig
CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC") renamed a Kconfig
symbol, thus making all MIPS builds ask for this specific Kconfig
symbol, add it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38535
Florian Fainelli [Fri, 25 Oct 2013 01:48:10 +0000 (01:48 +0000)]
buildroot: add lz4 initramfs compression option
LZ4 compression is now available with 3.12 kernels offer it as an
option.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38534
Florian Fainelli [Fri, 25 Oct 2013 01:48:02 +0000 (01:48 +0000)]
include: handle LZ4 compression scheme
Kernel 3.12 now offers LZ4 compression which will make initramfs builds
fail because we do not know how to substitute the relevant config
symbols, fix that.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38533
Florian Fainelli [Fri, 25 Oct 2013 01:47:54 +0000 (01:47 +0000)]
kernel: add some missing 3.12 config symbols
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38532
Florian Fainelli [Fri, 25 Oct 2013 01:47:45 +0000 (01:47 +0000)]
kernel: make kmod-pcnet32 depend on kmod-mii
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38531
Florian Fainelli [Fri, 25 Oct 2013 01:47:32 +0000 (01:47 +0000)]
kernel: add mii library kernel module package
This package is required for network drivers such as pcnet32
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38530
John Crispin [Thu, 24 Oct 2013 14:27:03 +0000 (14:27 +0000)]
procd: update to latest git head
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38529
Imre Kaloz [Thu, 24 Oct 2013 13:50:11 +0000 (13:50 +0000)]
preliminary 3.12 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38528
Florian Fainelli [Thu, 24 Oct 2013 00:28:33 +0000 (00:28 +0000)]
buildroot: split Kernel config options to Config-kernel.in
The number of Linux kernel related config options has become quite big
over the past few months, they deserve their own Config-kernel.in file.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38524
projects / openwrt / staging / blocktrron.git / log