ARM: shmobile: marzen: Use gic_iid macro for ICCIAR / interrupt ID

ARM: shmobile: add gic_iid macro for ICCIAR / interrupt ID
enabled to use gic_iid macro.
This patch exchange current GIC interrupt setting
from gic_spi() to gic_iid()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[ horms+renesas@verge.net.au: Split irq.h portion into a separate patch ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: kzm9g: Trim reference DT_MACHINE_START

Remove .init_late and .restart from DT_MACHINE_START
for kzm9g reference as these are not necessary to
bring the board up which is the main aim of kzm9g reference.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: kzm9g: Remove warning about SMP

Remove warning about SMP not working with the
clock initialisation used for kzm9g reference.

This is resolved by not selecting CONFIG_PREEMPT.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: simplify kzm9g Kconfig dependencies

Reference kernel configurations for armadillo800eva and kzm9g boards do not
have to depend on their respective "legacy" configurations, doing device
instantiation in .c, they can be configured and built independently.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
[horms+renesas@verge.net.au: created separate patch for kzm9g portion]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: SDHI and MMCIF interfaces to kzm9g-reference

Add SDHI0 and SDHI2 interfaces to kzm9g-reference. With no pinctrl DT
support we cannot use GPIO card-detection and regulator switching.
Also update the MMCIF DT node to use all 8 data lines and avoid
redundant information in DT.

Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
[ horms+renesas@verge.net.au: Updated for pinmux changes by Laurent Pinchart ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: parse DT and configure pinmux early on kzm9g-reference

GPIOs can be provided by the pinctrl subsystem, which can be initialised
by DT. Therefore DT has to be parsed before requesting GPIOs. Also non-DT
pinmux has to be configured early.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: kzm9g: Reference DT implementation

Provide alternate board code for the kzm9g to demonstrate
how DT may be used given the current state of driver
device tree support. This is intended to act as a reference
for mach-shmobile developers.

Some notes:

* Brings up the GIC interrupt handler using device tree
* Brings up the following device using device tree:
  - MMCIF (MMC)
* Does not bring up the INTC interrupt controller at all,
  thus external devices may not be used. In particular,
  the SMSC ethernet device may not be used and thus
  NFS root may not be used.
* Uses existing C code and not device tree to initialise the following,
  which are needed for a working board:
  - SCIF (Serial)
  - CMT (Clock)
  - PFC (GPIO)

To use this alternate board code instead of the normal board code,
CONFIG_MACH_KZM9G_REFERENCE should be selected in the kernel config.
And the sh73a0-kzm9g-reference.dtb flattened device tree blob should be used.

Includes fix by Thierry Reding to no longer use gic_handle_irq()

Includes fixes by Guennadi Liakhovetski for recent pinmux changes.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: marzen: Reference DT implementation

Provide alternate board code for the marzen to demonstrate
how DT may be used given the current state of driver
device tree support. This is intended to act as a reference
for mach-shmobile developers.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: mark mackerel sh_mmcif_device __maybe_unused

Patch eac036ef9e "ARM: shmobile: streamline mackerel SD and MMC devices"
made the use of the sh_mmcif_device variable for mackarel optional,
but the definition is always provided, causing a build warning.

arch/arm/mach-shmobile/board-mackerel.c:1120:31: warning: 'sh_mmcif_device'
defined but not used [-Wunused-variable]

Marking the variable as __maybe_unused will do the right thing here.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: streamline mackerel SD and MMC devices

This patch fixes the following issues with SD and MMC interfaces on mackerel:
1. replace custom card-detection functions with standard GPIO CD API
2. resources don't have to be numbered
3. add SDHI interrupt names
4. remove OCR masks, where regulators are used
5. only specify SDHI CD interrupts on interfaces where a CD pin is present -
   SDHI0
6. don't instantiate an MMCIF device and initialise MMCIF pins if SDHI1 is
   selected

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: switch SDHI0 to GPIO regulator on armadillo800eva

When regulators are used with MMC devices, explicitly provided OCR masks
are ignored, they can be removed from platform data. Also switch SDHI0
from fixed regulator with hard-wired GPIO levels to a proper GPIO regulator
instance to enable dynamic voltage switching.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: use GPIO SD-card detection on armadillo800eva

Switch SDHI0 and SDHI1 SD-card interfaces on armadillo800eva to using GPIO
card detection, which provides maximum power saving and automatically
selects IRQ or polling mode, depending on the CD GPIO capability.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Merge branches 'soc' and 'pinmux' into boards-base

r8a7779: Add Display Unit clock support

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
[Rename device from to rcarfb to rcar-du]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[Manual conflict resolution]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

ARM: shmobile: r8a7779: Remove INTC function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: r8a7779: Remove LBSC function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: r8a7779: Remove USB function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: r8a7779: Remove HSPI function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: r8a7779: Remove SCIF function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: r8a7779: Remove SDHI and MMCIF function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: r8a7779: Remove DU function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: r8a7779: Remove DU1_DOTCLKOUT1 GPIO

The function is not documented in the r8a7779 datasheet. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: r8a7740: Remove SDHI and MMCIF function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: r8a7740: Remove LCD0 and LCD1 function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: sh73a0: Remove IrDA function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: sh73a0: Remove USB function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: sh73a0: Remove BSC function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: sh73a0: Remove KEYSC function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: sh73a0: Remove pull-up function GPIOS

Those GPIOs have been deprecated by the pinconf API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: sh73a0: Remove FSI function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: sh73a0: Remove I2C function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: sh73a0: Remove SCIFA and SCIFB function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: sh73a0: Remove LCDC and LCDC2 function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: sh7372: Remove SDHI and MMCIF function GPIOs

Those GPIOs have been deprecated by the pinctrl API. They are unused and
unneeded, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

sh-pfc: r8a7779: Remove INTC function GPIOS

All r8a7779 platforms now use the pinctrl API to control the INTC pins,
the corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: r8a7779: Remove LBSC function GPIOS

All r8a7779 platforms now use the pinctrl API to control the LBSC pins,
the corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: r8a7779: Remove USB function GPIOS

All r8a7779 platforms now use the pinctrl API to control the USB pins,
the corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: r8a7779: Remove HSPI function GPIOS

All r8a7779 platforms now use the pinctrl API to control the HSPI pins,
the corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: r8a7779: Remove SCIF function GPIOS

All r8a7779 platforms now use the pinctrl API to control the SCIF pins,
the corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: r8a7779: Remove SDHI and MMCIF function GPIOS

All r8a7779 platforms now use the pinctrl API to control the SDHI and
MMCIF pins, the corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: r8a7779: Remove DU1_DOTCLKOUT1 GPIO

The function is not documented in the r8a7779 datasheet. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: r8a7740: Remove SDHI and MMCIF function GPIOS

All r8a7740 platforms now use the pinctrl API to control the SDHI and
MMCIF pins, the corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: r8a7740: Remove LCD0 and LCD1 function GPIOS

All r8a7740 platforms now use the pinctrl API to control the LCD0 and
LCD1 pins, the corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Remove IrDA function GPIOS

All sh73a0 platforms now use the pinctrl API to control the IrDA pins,
the corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Remove USB function GPIOS

All sh73a0 platforms now use the pinctrl API to control the USB pins,
the corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Remove BSC function GPIOS

All sh73a0 platforms now use the pinctrl API to control the BSC pins,
the corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Remove KEYSC function GPIOS

All sh73a0 platforms now use the pinctrl API to control the KEYSC pins,
the corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Remove pull-up function GPIOS

All sh73a0 platforms now use the pinconf API to control pull-ups, the
corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Remove FSI function GPIOS

All sh73a0 platforms now use the pinctrl API to control the FSI pins,
the corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Remove I2C function GPIOS

All sh73a0 platforms now use the pinctrl API to control the I2C pins,
the corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Remove SCIFA and SCIFB function GPIOS

All sh73a0 platforms now use the pinctrl API to control the SCIFA and
SCIFB pins, the corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Remove LCD and LCD2 function GPIOS

All sh73a0 platforms now use the pinctrl API to control the LCD and
LCD2 pins, the corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh7372: Remove SDHI and MMCIF function GPIOS

All sh7372 platforms now use the pinctrl API to control the SDHI and
MMCIF pins, the corresponding function GPIOS are unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

ARM: shmobile: marzen: Register pinctrl mappings for INTC

Replace the GPIO-based INTC pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: marzen: Register pinctrl mappings for LBSC

Replace the GPIO-based LBSC pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: marzen: Register pinctrl mappings for USB

Replace the GPIO-based USB pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: marzen: Register pinctrl mappings for HSPI

Replace the GPIO-based HSPI pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: marzen: Register pinctrl mappings for SCIF

Replace the GPIO-based SCIF pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: marzen: Register pinctrl mappings for SDHI and MMCIF

Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: mackerel: Register pinctrl mappings for SDHI and MMCIF

Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: kzm9g: Register pinctrl mappings for USB

Replace the GPIO-based USB pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: kzm9g: Register pinctrl mappings for BSC

Replace the GPIO-based BSC pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: kzm9g: Register pinctrl mappings for SDHI and MMCIF

Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: kzm9g: Register pinctrl mappings for FSI

Replace the GPIO-based FSI pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: kzm9g: Register pinctrl mappings for I2C

Replace the GPIO-based I2C pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: kzm9g: Register pinctrl mappings for SCIF

Replace the GPIO-based SCIF pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: kzm9g: Register pinctrl mappings for LCD

Replace the GPIO-based LCD pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

ARM: shmobile: kota2: Register pinctrl mappings for BSC

Replace the GPIO-based BSC pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: kota2: Register pinctrl mappings for KEYSC

Replace the GPIO-based KEYSC pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: kota2: Register pinctrl mappings for SDHI and MMCIF

Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.

Board code used the non-pulled-up version of the function GPIOs, but
those are defined in the PFC driver as enabling the pull-ups anyway.
Enable pull-ups on the MMCIF data and command pins through the pinconf
API.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: kota2: Register pinctrl mappings for SCIF

Replace the GPIO-based SCIF pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: bonito: Register pinctrl mappings for LCDC0

Replace the GPIO-based LCDC0 pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: armadillo800eva: Register pinctrl mappings for SDHI and MMCIF

Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: armadillo800eva: Register pinctrl mappings for LCDC0

Replace the GPIO-based LCDC0 pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

ARM: shmobile: ap4evb: Register pinctrl mappings for SDHI and MMCIF

Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: ag5evm: Register pinctrl mappings for IrDA

Replace the GPIO-based IrDA pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: ag5evm: Register pinctrl mappings for KEYSC

Replace the GPIO-based KEYSC pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: ag5evm: Register pinctrl mappings for SDHI and MMCIF

Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl
mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: ag5evm: Register pinctrl mappings for FSI

Replace the GPIO-based FSI pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: ag5evm: Register pinctrl mappings for I2C

Replace the GPIO-based I2C pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

ARM: shmobile: ag5evm: Register pinctrl mappings for SCIF

Replace the GPIO-based SCIF pinmux configuration by pinctrl mappings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

sh-pfc: r8a7779: Add INTC pin groups and functions

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: r8a7779: Add LBSC pin groups and functions

Only the CS pins and functions are currently handled.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: r8a7779: Add USB pin groups and functions

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: r8a7779: Add USB0 and USB1 PENC pinmux support

The USB0 and USB1 PENC functions were missing. Add them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: r8a7779: Add HSPI pin groups and functions

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: r8a7779: Add SCIF pin groups and functions

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: r8a7779: Add SDHI and MMCIF pin groups and functions

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: r8a7779: Add DU pin groups and functions

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: r8a7740: Add SDHI and MMCIF pin groups and functions

Add pin groups for the first two SDHI interfaces and two alternative pin
groups for the MMCIF interface on the r8a7740 SoC.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: r8a7740: Add LCDC0 and LCDC1 pin groups and functions

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Add IrDA pin groups and functions

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Add USB pin groups and functions

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Add BSC pin groups and functions

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Add KEYSC pin groups and functions

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Add SDHI and MMCIF pin groups and functions

Add pin group definitions for SDHI0, SDHI1, SDHI2 and MMCIF interfaces on
sh73a0.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Add FSI pin groups and functions

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Add I2C2 and I2C3 pin groups and functions

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Add SCIFA and SCIFB pin groups and functions

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

sh-pfc: sh73a0: Add LCD and LCD2 pin groups and functions

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>