git.openwrt.org Git - openwrt/staging/blogic.git/log

x86/kgdb: Replace bool_int_array[NR_CPUS] with bitmap

Straigntforward conversion from:

int was_in_debug_nmi[NR_CPUS]

to:

DECLARE_BITMAP(was_in_debug_nmi, NR_CPUS)

Saves about 2 kbytes in BSS for NR_CPUS=512.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1443271638-2568-1-git-send-email-dvlasenk@redhat.com
[ Tidied up the code a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus

Pull MIPS fixes from Ralf Baechle:
- Properly setup irq handling for ATH79 platforms
- Fix bootmem mapstart calculation for contiguous maps
- Handle little endian and older CPUs correct in BPF
- Fix console for Fulong 2E systems
- Handle FTLB correctly on R6 CPUs
- Fixes for CM, GIC and MAAR support code

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Initialise MAARs on secondary CPUs
  MIPS: print MAAR configuration during boot
  MIPS: mm: compile maar_init unconditionally
  irqchip: mips-gic: Fix pending & mask reads for MIPS64 with 32b GIC.
  irqchip: mips-gic: Convert CPU numbers to VP IDs.
  MIPS: CM: Provide a function to map from CPU to VP ID.
  MIPS: Fix FTLB detection for R6
  MIPS: cpu-features: Add cpu_has_ftlb
  MIPS: ATH79: Add irq chip ar7240-misc-intc
  MIPS: ATH79: Set missing irq ack handler for ar7100-misc-intc irq chip
  MIPS: BPF: Fix build on pre-R2 little endian CPUs
  MIPS: BPF: Avoid unreachable code on little endian
  MIPS: bootmem: Fix mapstart calculation for contiguous maps
  MIPS: Fix console output for Fulong2e system

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:
"Another pile of fixes for perf:

   - Plug overflows and races in the core code

   - Sanitize the flow of the perf syscall so we error out before
     handling the more complex and hard to undo setups

   - Improve and fix Broadwell and Skylake hardware support

   - Revert a fix which broke what it tried to fix in perf tools

   - A couple of smaller fixes in various places of perf tools"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Fix copying of /proc/kcore
  perf intel-pt: Remove no_force_psb from documentation
  perf probe: Use existing routine to look for a kernel module by dso->short_name
  perf/x86: Change test_aperfmperf() and test_intel() to static
  tools lib traceevent: Fix string handling in heterogeneous arch environments
  perf record: Avoid infinite loop at buildid processing with no samples
  perf: Fix races in computing the header sizes
  perf: Fix u16 overflows
  perf: Restructure perf syscall point of no return
  perf/x86/intel: Fix Skylake FRONTEND MSR extrareg mask
  perf/x86/intel/pebs: Add PEBS frontend profiling for Skylake
  perf/x86/intel: Make the CYCLE_ACTIVITY.* constraint on Broadwell more specific
  perf tools: Bool functions shouldn't return -1
  tools build: Add test for presence of __get_cpuid() gcc builtin
  tools build: Add test for presence of numa_num_possible_cpus() in libnuma
  Revert "perf symbols: Fix mismatched declarations for elf_getphdrnum"
  perf stat: Fix per-pkg event reporting bug

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fix from Thomas Gleixner:
"A single bug fix for the scheduler to prevent dequeueing of the idle
task when setting the cpus allowed mask"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix crash trying to dequeue/enqueue the idle thread

Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull locking fix from Thomas Gleixner:
"A single bugfix for lockdep to preserve the pinning counter when
rebuilding the lock stack"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Fix hlock->pin_count reset on lock stack rebuilds

MIPS: Initialise MAARs on secondary CPUs

MAARs should be initialised on each CPU (or rather, core) in the system
in order to achieve consistent behaviour & performance. Previously they
have only been initialised on the boot CPU which leads to performance
problems if tasks are later scheduled on a secondary CPU, particularly
if those tasks make use of unaligned vector accesses where some CPUs
don't handle any cases in hardware for non-speculative memory regions.
Fix this by recording the MAAR configuration from the boot CPU and
applying it to secondary CPUs as part of their bringup.

Reported-by: Doug Gilmore <doug.gilmore@imgtec.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: linux-kernel@vger.kernel.org
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Hemmo Nieminen <hemmo.nieminen@iki.fi>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Patchwork: https://patchwork.linux-mips.org/patch/11239/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: print MAAR configuration during boot

Verifying that the MAAR configuration is as expected is useful when
debugging the performance of a system. Print out the memory regions
configured via MAAR along with their attributes.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: linux-kernel@vger.kernel.org
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Patchwork: https://patchwork.linux-mips.org/patch/11238/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: mm: compile maar_init unconditionally

maar_init was previously only compiled when CONFIG_NEED_MULTIPLE_NODES
was not set, which has been fine since it is only called from the
standard implementation of mem_init which has the same condition. In
preparation for calling it from the SMP startup code on secondary CPUs,
move maar_init outside of the #ifndef such that it is always compiled.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: linux-kernel@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/11237/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

irqchip: mips-gic: Fix pending & mask reads for MIPS64 with 32b GIC.

gic_handle_shared_int reads the GIC interrupt pending & mask registers
directly into a bitmap, which is defined as an array of unsigned longs.
The GIC pending registers may be 32 bits wide if the CM is older than
CM3, regardless of the bit width of the CPU, but for MIPS64 kernels
the unsigned longs in the bitmap will be 64 bits wide. In this case we
need to perform 2 x 32 bit reads per 64 bit unsigned long in order to
avoid missing interrupts.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11213/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

irqchip: mips-gic: Convert CPU numbers to VP IDs.

Make use of the mips_cm_vp_id function to convert from Linux CPU numbers
to the VP IDs used by hardware, which are not identical in all systems.
Without doing so we map interrupts to incorrect VP(E)s.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11212/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: CM: Provide a function to map from CPU to VP ID.

The VP ID of a given CPU may not match up with the CPU number used by
Linux. For example, if the width of the VP part of the VP ID is wider
than log2(number of VPs per core) and the system has multiple cores then
this will be the case. Alternatively, if a pre-r6 system implements the
MT ASE with multiple VPEs per core and Linux is built without support
for the MT ASE then the numbers won't match up either. Provide a
function to convert from CPU number to VP ID.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11211/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Linux 4.3-rc3

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
"Two bugfixes from Andy addressing at least some of the subtle NMI
  related wreckage which has been reported by Sasha Levin"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/nmi/64: Fix a paravirt stack-clobbering bug in the NMI code
  x86/paravirt: Replace the paravirt nop with a bona fide empty function

Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fix from Thomass Gleixner:
"A bugfix for the atmel aic5 irq chip driver which caches the wrong
data and thereby breaking resume"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/atmel-aic5: Use per chip mask caches in mask/unmask()

Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
"Just two fixes: wire up the new system calls added during the last
  merge window, and fix another user access site"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: alignment: fix alignment handling for uaccess changes
  ARM: wire up new syscalls

Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
"Our first real batch of fixes this release cycle.  Nothing really
  concerning, and diffstat is a bit inflated due to some DT contents
  moving around on STi platforms.

  There's a collection of them here:

   - A fixup for a build breakage that hits on arm64 allmodconfig in
     QCOM SCM firmware drivers
   - MMC fixes for OMAP that had quite a bit of breakage this merge
     window.
   - Misc build/warning fixes on PXA and OMAP
   - A couple of minor fixes for Beagleboard X15 which is now starting
     to see a few more users in the wild"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
  ARM: sti: dt: adapt DT to fix probe/bind issues in DRM driver
  ARM: dts: fix omap2+ address translation for pbias
  firmware: qcom: scm: Add function stubs for ARM64
  ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2
  ARM: omap2plus_defconfig: enable GPIO_PCA953X
  ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets
  ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late
  ARM: dts: am57xx-beagle-x15: Update Phy supplies
  ARM: pxa: balloon3: Fix build error
  ARM: dts: Fixup model name for HP t410 dts
  ARM: dts: DRA7: fix a typo in ethernet
  ARM: omap2plus_defconfig: make PCF857x built-in
  ARM: dts: Use ti,pbias compatible string for pbias
  ARM: OMAP5: Cleanup options for SoC only build
  ARM: DRA7: Select missing options for SoC only build
  ARM: OMAP2+: board-generic: Remove stale of_irq macros
  ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well
  ARM: dts: omap3-igep: Move eth IRQ pinmux to IGEPv2 common dtsi
  ARM: dts: am57xx-beagle-x15: Add wakeup irq for mcp79410
  ARM: dts: am335x-phycore-som: Fix mpu voltage
  ...

Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6

Pull CIFS fixes from Steve French:
"Four fixes from testing at the recent SMB3 Plugfest including two
  important authentication ones (one fixes authentication problems to
  some popular servers when clock times differ more than two hours
  between systems, the other fixes Kerberos authentication for SMB3)"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  fix encryption error checks on mount
  [SMB3] Fix sec=krb5 on smb3 mounts
  cifs: use server timestamp for ntlmv2 authentication
  disabling oplocks/leases via module parm enable_oplocks broken for SMB3

Merge tag 'pxa-fixes-v4.3' of https://github.com/rjarzmik/linux into fixes

ARM: pxa: fixes for v4.3

These fixes are mainly regression fixes triggered by irq changes,
common clock framework introduction and sound side-effect of
other platforms.

* tag 'pxa-fixes-v4.3' of https://github.com/rjarzmik/linux:
  ARM: pxa: balloon3: Fix build error
  ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding
  ARM: pxa: fix DFI bus lockups on startup

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.3/fixes-rc2' of git://git./linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps for v4.3-rc cycle:

- Two more patches to fix most of the MMC regressions with the
  PBIAS regulator changes. At least two MMC driver related issues
  still seems to remain for omap3 legacy booting and omap4 duovero.
  Note that the dts changes depend on a recent regulator fix, and
  are based on the regulator commit now in mainline kernel

- Enable autoidle for am43xx clocks to prevent clocks from staying
  always on

- Fix i2c5 pinctrl offsets for omap5-uevm

- Enable PCA953X as that's needed for HDMI to work on omap5

- Update phy supplies for beagle x15 beta board

- Use palmas-usb for on beagle x15 to start using the related
  driver that recently got merged

* tag 'omap-for-v4.3/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: fix omap2+ address translation for pbias
  ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2
  ARM: omap2plus_defconfig: enable GPIO_PCA953X
  ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets
  ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late
  ARM: dts: am57xx-beagle-x15: Update Phy supplies
  regulator: pbias: program pbias register offset in pbias driver
  ARM: omap2plus_defconfig: Enable MUSB DMA support
  ARM: DRA752: Add ID detect for ES2.0
  ARM: OMAP3: vc: fix 'or' always true warning
  ARM: OMAP2+: Fix booting if no timer parent clock is available
  ARM: OMAP2+: omap-device: fix race deferred probe of omap_hsmmc vs omap_device_late_init

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
"This fixes the following issues:

   - check the return value of platform_get_irq as signed int in xgene.

   - skip adf_dev_restore on virtual functions in qat.

   - fix double-free with backlogged requests in marvell_cesa"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  hwrng: xgene - fix handling platform_get_irq
  crypto: qat - VF should never trigger SBR on PH
  crypto: marvell - properly handle CRYPTO_TFM_REQ_MAY_BACKLOG-flagged requests

Merge git://git./linux/kernel/git/nab/target-pending

Pull SCSI target fixes from Nicholas Bellinger:
"This includes a iser-target series from Jenny + Sagi @ Mellanox that
  addresses the few remaining active I/O shutdown bugs, along with a
  patch to support zero-copy for immediate data payloads that gives a
  nice performance improvement for small block WRITEs.

  Also included are some recent >= v4.2 regression bug-fixes.  The most
  notable is a RCU conversion regression for SPC-3 PR registrations, and
  recent removal of obsolete RFC-3720 markers that introduced a login
  regression bug with MSFT iSCSI initiators.

  Thanks to everyone who has been testing + reporting bugs for v4.x"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  iscsi-target: Avoid OFMarker + IFMarker negotiation
  target: Make TCM_WRITE_PROTECT failure honor D_SENSE bit
  target: Fix target_sense_desc_format NULL pointer dereference
  target: Propigate backend read-only to core_tpg_add_lun
  target: Fix PR registration + APTPL RCU conversion regression
  iser-target: Skip data copy if all the command data comes as immediate
  iser-target: Change the recv buffers posting logic
  iser-target: Fix pending connections handling in target stack shutdown sequnce
  iser-target: Remove np_ prefix from isert_np members
  iser-target: Remove unused variables
  iser-target: Put the reference on commands waiting for unsol data
  iser-target: remove command with state ISTATE_REMOVE

Merge tag 'usb-4.3-rc3' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are some USB driver fixes for 4.3-rc3.

  There's the usual assortment of new device ids, combined with xhci and
  gadget driver fixes.  Full details in the shortlog.  All of these have
  been in linux-next with no reported problems"

* tag 'usb-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (34 commits)
  MAINTAINERS: remove amd5536udc USB gadget driver maintainer
  USB: whiteheat: fix potential null-deref at probe
  xhci: init command timeout timer earlier to avoid deleting it uninitialized
  xhci: change xhci 1.0 only restrictions to support xhci 1.1
  usb: xhci: exit early in xhci_setup_device() if we're halted or dying
  usb: xhci: stop everything on the first call to xhci_stop
  usb: xhci: Clear XHCI_STATE_DYING on start
  usb: xhci: lock mutex on xhci_stop
  xhci: Move xhci_pme_quirk() behind #ifdef CONFIG_PM
  xhci: give command abortion one more chance before killing xhci
  usb: Use the USB_SS_MULT() macro to get the burst multiplier.
  usb: dwc3: gadget: Fix BUG in RT config
  usb: musb: fix cppi channel teardown for isoch transfer
  usb: phy: isp1301: Export I2C module alias information
  usb: gadget: drop null test before destroy functions
  usb: gadget: dummy_hcd: in transfer(), return data sent, not limit
  usb: gadget: dummy_hcd: fix rescan logic for transfer
  usb: gadget: dummy_hcd: fix unneeded else-if condition
  usb: gadget: dummy_hcd: emulate sending zlp in packet logic
  usb: musb: dsps: fix polling in device-only mode
  ...

Merge tag 'tty-4.3-rc3' of git://git./linux/kernel/git/gregkh/tty

Pull serial driver fix from Greg KH:
"Here is one serial driver fix for 4.3-rc3 that resolves a module
  loading issue due to splitting up of the 8250 driver into smaller
  pieces.  It's been in linux-next with no reported problems"

* tag 'tty-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: Add missing module license for 8250_base.ko

Merge tag 'staging-4.3-rc3' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
"Here are some tiny staging driver and documentation fixes for 4.3-rc3.

  All of these resolve reported issues that people have found and have
  been in the linux-next tree for a while with no problems"

* tag 'staging-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  MAINTAINERS: Update email address for Martyn Welch
  staging: ion: fix corruption of ion_import_dma_buf
  staging: dgap: Remove myself from the MAINTAINERS file
  staging: most: Add dependency to HAS_IOMEM
  staging: unisys: remove reference of visorutil
  staging: unisys: visornic: handle error return from device registration
  staging: unisys: stop device registration before visorbus registration
  staging: unisys: visorbus: Unregister driver on error
  staging: unisys: visornic: Fix receive bytes statistics
  staging: unisys: unregister netdev when create debugfs fails
  staging: fbtft: replace master->setup() with spi_setup()
  staging: fbtft: fix 9-bit SPI support detection
  staging/lustre: change Lustre URLs and mailing list
  staging/android: Update ION TODO per LPC discussion
  Staging: most: MOST and MOSTCORE should depend on HAS_DMA
  staging: most: fix HDM_USB dependencies and build errors

Merge tag 'driver-core-4.3-rc3' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
"Here is one driver core fix for 4.3-rc3 that resolves a reported oops"

* tag 'driver-core-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
cpu/cacheinfo: Fix teardown path

Merge tag 'char-misc-4.3-rc3' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here's some tiny char and misc driver fixes that resolve some reported
  errors for 4.3-rc3.

  All of these have been in linux-next with no problems for a while"

* tag 'char-misc-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  extcon: Fix attached value returned by is_extcon_changed
  Drivers: hv: vmbus: fix init_vp_index() for reloading hv_netvsc
  mei: fix debugfs files leak on error path
  thunderbolt: Allow loading of module on recent Apple MacBooks with thunderbolt 2 controller

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) When we run a tap on netlink sockets, we have to copy mmap'd SKBs
    instead of cloning them.  From Daniel Borkmann.

2) When converting classical BPF into eBPF, fix the setting of the
    source reg to BPF_REG_X.  From Tycho Andersen.

3) Fix igmpv3/mldv2 report parsing in the bridge multicast code, from
    Linus Lussing.

4) Fix dst refcounting for ipv6 tunnels, from Martin KaFai Lau.

5) Set NLM_F_REPLACE flag properly when replacing ipv6 routes, from
    Roopa Prabhu.

6) Add some new cxgb4 PCI device IDs, from Hariprasad Shenai.

7) Fix headroom tests and SKB leaks in ipv6 fragmentation code, from
    Florian Westphal.

8) Check DMA mapping errors in bna driver, from Ivan Vecera.

9) Several 8139cp bug fixes (dev_kfree_skb_any in interrupt context,
    misclearing of interrupt status in TX timeout handler, etc.) from
    David Woodhouse.

10) In tipc, reset SKB header pointer after skb_linearize(), from Erik
    Hugne.

11) Fix autobind races et al. in netlink code, from Herbert Xu with
    help from Tejun Heo and others.

12) Missing SET_NETDEV_DEV in sunvnet driver, from Sowmini Varadhan.

13) Fix various races in timewait timer and reqsk_queue_hadh_req, from
    Eric Dumazet.

14) Fix array overruns in mac80211, from Johannes Berg and Dan
    Carpenter.

15) Fix data race in rhashtable_rehash_one(), from Dmitriy Vyukov.

16) Fix race between poll_one_napi and napi_disable, from Neil Horman.

17) Fix byte order in geneve tunnel port config, from John W Linville.

18) Fix handling of ARP replies over lightweight tunnels, from Jiri
    Benc.

19) We can loop when fib rule dumps cross multiple SKBs, fix from Wilson
    Kok and Roopa Prabhu.

20) Several reference count handling bug fixes in the PHY/MDIO layer
    from Russel King.

21) Fix lockdep splat in ppp_dev_uninit(), from Guillaume Nault.

22) Fix crash in icmp_route_lookup(), from David Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
  net: Fix panic in icmp_route_lookup
  net: update docbook comment for __mdiobus_register()
  ppp: fix lockdep splat in ppp_dev_uninit()
  net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selected
  phy: marvell: add link partner advertised modes
  net: fix net_device refcounting
  phy: add phy_device_remove()
  phy: fixed-phy: properly validate phy in fixed_phy_update_state()
  net: fix phy refcounting in a bunch of drivers
  of_mdio: fix MDIO phy device refcounting
  phy: add proper phy struct device refcounting
  phy: fix mdiobus module safety
  net: dsa: fix of_mdio_find_bus() device refcount leak
  phy: fix of_mdio_find_bus() device refcount leak
  ip6_tunnel: Reduce log level in ip6_tnl_err() to debug
  ip6_gre: Reduce log level in ip6gre_err() to debug
  fib_rules: fix fib rule dumps across multiple skbs
  bnx2x: byte swap rss_key to comply to Toeplitz specs
  net: revert "net_sched: move tp->root allocation into fw_init()"
  lwtunnel: remove source and destination UDP port config option
  ...

Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

  - Fix copying of /proc/kcore made to the ~/.debug/ DSO cache to allow using
    objdump with kcore files. (Adrian Hunter)

  - Fix adding perf probes in kernel module functions. (Arnaldo Carvalho de Melo)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

net: Fix panic in icmp_route_lookup

Andrey reported a panic:

[ 7249.865507] BUG: unable to handle kernel pointer dereference at 000000b4
[ 7249.865559] IP: [<c16afeca>] icmp_route_lookup+0xaa/0x320
[ 7249.865598] *pdpt = 0000000030f7f001 *pde = 0000000000000000
[ 7249.865637] Oops: 0000 [#1]
...
[ 7249.866811] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
4.3.0-999-generic #201509220155
[ 7249.866876] Hardware name: MSI MS-7250/MS-7250, BIOS 080014  08/02/2006
[ 7249.866916] task: c1a5ab00 ti: c1a52000 task.ti: c1a52000
[ 7249.866949] EIP: 0060:[<c16afeca>] EFLAGS: 00210246 CPU: 0
[ 7249.866981] EIP is at icmp_route_lookup+0xaa/0x320
[ 7249.867012] EAX: 00000000 EBX: f483ba48 ECX: 00000000 EDX: f2e18a00
[ 7249.867045] ESI: 000000c0 EDI: f483ba70 EBP: f483b9ec ESP: f483b974
[ 7249.867077]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 7249.867108] CR0: 8005003b CR2: 000000b4 CR3: 36ee07c0 CR4: 000006f0
[ 7249.867141] Stack:
[ 7249.867165]  320310ee 00000000 00000042 320310ee 00000000 c1aeca00
f3920240 f0c69180
[ 7249.867268]  f483ba04 f855058b a89b66cd f483ba44 f8962f4b 00000000
e659266c f483ba54
[ 7249.867361]  8004753c f483ba5c f8962f4b f2031140 000003c1 ffbd8fa0
c16b0e00 00000064
[ 7249.867448] Call Trace:
[ 7249.867494]  [<f855058b>] ? e1000_xmit_frame+0x87b/0xdc0 [e1000e]
[ 7249.867534]  [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack]
[ 7249.867576]  [<f8962f4b>] ? tcp_in_window+0xeb/0xb10 [nf_conntrack]
[ 7249.867615]  [<c16b0e00>] ? icmp_send+0xa0/0x380
[ 7249.867648]  [<c16b102f>] icmp_send+0x2cf/0x380
[ 7249.867681]  [<f89c8126>] nf_send_unreach+0xa6/0xc0 [nf_reject_ipv4]
[ 7249.867714]  [<f89cd0da>] reject_tg+0x7a/0x9f [ipt_REJECT]
[ 7249.867746]  [<f88c29a7>] ipt_do_table+0x317/0x70c [ip_tables]
[ 7249.867780]  [<f895e0a6>] ? __nf_conntrack_find_get+0x166/0x3b0
[nf_conntrack]
[ 7249.867838]  [<f895eea8>] ? nf_conntrack_in+0x398/0x600 [nf_conntrack]
[ 7249.867889]  [<f84c0035>] iptable_filter_hook+0x35/0x80 [iptable_filter]
[ 7249.867933]  [<c16776a1>] nf_iterate+0x71/0x80
[ 7249.867970]  [<c1677715>] nf_hook_slow+0x65/0xc0
[ 7249.868002]  [<c1681811>] __ip_local_out_sk+0xc1/0xd0
[ 7249.868034]  [<c1680f30>] ? ip_forward_options+0x1a0/0x1a0
[ 7249.868066]  [<c1681836>] ip_local_out_sk+0x16/0x30
[ 7249.868097]  [<c1684054>] ip_send_skb+0x14/0x80
[ 7249.868129]  [<c16840f4>] ip_push_pending_frames+0x34/0x40
[ 7249.868163]  [<c16844a2>] ip_send_unicast_reply+0x282/0x310
[ 7249.868196]  [<c16a0863>] tcp_v4_send_reset+0x1b3/0x380
[ 7249.868227]  [<c16a1b63>] tcp_v4_rcv+0x323/0x990
[ 7249.868257]  [<c16776a1>] ? nf_iterate+0x71/0x80
[ 7249.868289]  [<c167dc2b>] ip_local_deliver_finish+0x8b/0x230
[ 7249.868322]  [<c167df4c>] ip_local_deliver+0x4c/0xa0
[ 7249.868353]  [<c167dba0>] ? ip_rcv_finish+0x390/0x390
[ 7249.868384]  [<c167d88c>] ip_rcv_finish+0x7c/0x390
[ 7249.868415]  [<c167e280>] ip_rcv+0x2e0/0x420
...

Prior to the VRF change the oif was not set in the flow struct, so the
VRF support should really have only added the vrf_master_ifindex lookup.

Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX")
Cc: Andrey Melnikov <temnota.am@gmail.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: update docbook comment for __mdiobus_register()

Update the docbook comment for __mdiobus_register() to include the new
module owner argument. This resolves a warning found by the 0-day
builder.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: remove amd5536udc USB gadget driver maintainer

Thomas can no longer work on the driver, so he asked me to mark the
MAINTAINER entry as "Orphan" with the hope that someone else would
someday pick it up.

Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge branch 'for-4.3-fixes' of git://git./linux/kernel/git/tj/cgroup

Pull another cgroup fix from Tejun Heo:
"The cgroup writeback support got inadvertently enabled for traditional
  hierarchies revealing two regressions which are currently being worked
  on.  It shouldn't have been enabled on traditional hierarchies, so
  disable it on them.  This is enough to make the regressions go away
  for people who aren't experimenting with cgroup"

* 'for-4.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup, writeback: don't enable cgroup writeback on traditional hierarchies

ppp: fix lockdep splat in ppp_dev_uninit()

ppp_dev_uninit() locks all_ppp_mutex while under rtnl mutex protection.
ppp_create_interface() must then lock these mutexes in that same order
to avoid possible deadlock.

[  120.880011] ======================================================
[  120.880011] [ INFO: possible circular locking dependency detected ]
[  120.880011] 4.2.0 #1 Not tainted
[  120.880011] -------------------------------------------------------
[  120.880011] ppp-apitest/15827 is trying to acquire lock:
[  120.880011]  (&pn->all_ppp_mutex){+.+.+.}, at: [<ffffffffa0145f56>] ppp_dev_uninit+0x64/0xb0 [ppp_generic]
[  120.880011]
[  120.880011] but task is already holding lock:
[  120.880011]  (rtnl_mutex){+.+.+.}, at: [<ffffffff812e4255>] rtnl_lock+0x12/0x14
[  120.880011]
[  120.880011] which lock already depends on the new lock.
[  120.880011]
[  120.880011]
[  120.880011] the existing dependency chain (in reverse order) is:
[  120.880011]
[  120.880011] -> #1 (rtnl_mutex){+.+.+.}:
[  120.880011]        [<ffffffff81073a6f>] lock_acquire+0xcf/0x10e
[  120.880011]        [<ffffffff813ab18a>] mutex_lock_nested+0x56/0x341
[  120.880011]        [<ffffffff812e4255>] rtnl_lock+0x12/0x14
[  120.880011]        [<ffffffff812d9d94>] register_netdev+0x11/0x27
[  120.880011]        [<ffffffffa0147b17>] ppp_ioctl+0x289/0xc98 [ppp_generic]
[  120.880011]        [<ffffffff8113b367>] do_vfs_ioctl+0x4ea/0x532
[  120.880011]        [<ffffffff8113b3fd>] SyS_ioctl+0x4e/0x7d
[  120.880011]        [<ffffffff813ad7d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
[  120.880011]
[  120.880011] -> #0 (&pn->all_ppp_mutex){+.+.+.}:
[  120.880011]        [<ffffffff8107334e>] __lock_acquire+0xb07/0xe76
[  120.880011]        [<ffffffff81073a6f>] lock_acquire+0xcf/0x10e
[  120.880011]        [<ffffffff813ab18a>] mutex_lock_nested+0x56/0x341
[  120.880011]        [<ffffffffa0145f56>] ppp_dev_uninit+0x64/0xb0 [ppp_generic]
[  120.880011]        [<ffffffff812d5263>] rollback_registered_many+0x19e/0x252
[  120.880011]        [<ffffffff812d5381>] rollback_registered+0x29/0x38
[  120.880011]        [<ffffffff812d53fa>] unregister_netdevice_queue+0x6a/0x77
[  120.880011]        [<ffffffffa0146a94>] ppp_release+0x42/0x79 [ppp_generic]
[  120.880011]        [<ffffffff8112d9f6>] __fput+0xec/0x192
[  120.880011]        [<ffffffff8112dacc>] ____fput+0x9/0xb
[  120.880011]        [<ffffffff8105447a>] task_work_run+0x66/0x80
[  120.880011]        [<ffffffff81001801>] prepare_exit_to_usermode+0x8c/0xa7
[  120.880011]        [<ffffffff81001900>] syscall_return_slowpath+0xe4/0x104
[  120.880011]        [<ffffffff813ad931>] int_ret_from_sys_call+0x25/0x9f
[  120.880011]
[  120.880011] other info that might help us debug this:
[  120.880011]
[  120.880011]  Possible unsafe locking scenario:
[  120.880011]
[  120.880011]        CPU0                    CPU1
[  120.880011]        ----                    ----
[  120.880011]   lock(rtnl_mutex);
[  120.880011]                                lock(&pn->all_ppp_mutex);
[  120.880011]                                lock(rtnl_mutex);
[  120.880011]   lock(&pn->all_ppp_mutex);
[  120.880011]
[  120.880011]  *** DEADLOCK ***

Fixes: 8cb775bc0a34 ("ppp: fix device unregistration upon netns deletion")
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selected

The builds of allmodconfig of avr32 is failing with:

drivers/net/ethernet/via/via-rhine.c:1098:2: error: implicit declaration
of function 'pci_iomap' [-Werror=implicit-function-declaration]
drivers/net/ethernet/via/via-rhine.c:1119:2: error: implicit declaration
of function 'pci_iounmap' [-Werror=implicit-function-declaration]

The generic empty pci_iomap and pci_iounmap is used only if CONFIG_PCI
is not defined and CONFIG_GENERIC_PCI_IOMAP is defined.

Add GENERIC_PCI_IOMAP in the dependency list for VIA_RHINE as we are
getting build failure when CONFIG_PCI and CONFIG_GENERIC_PCI_IOMAP both
are not defined.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

phy: marvell: add link partner advertised modes

Read the standard link partner advertisment registers and store it in
phydev->lp_advertising, so ethtool can report this information to
userspace via ethtool. Zero it as per genphy if autonegotiation is
disabled. Tested with a Marvell 88E1512 PHY.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-linus-4.3' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
"This is an assorted set I've been queuing up:

  Jeff Mahoney tracked down a tricky one where we ended up starting IO
  on the wrong mapping for special files in btrfs_evict_inode.  A few
  people reported this one on the list.

  Filipe found (and provided a test for) a difficult bug in reading
  compressed extents, and Josef fixed up some quota record keeping with
  snapshot deletion.  Chandan killed off an accounting bug during DIO
  that lead to WARN_ONs as we freed inodes"

* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: keep dropped roots in cache until transaction commit
  Btrfs: Direct I/O: Fix space accounting
  btrfs: skip waiting on ordered range for special files
  Btrfs: fix read corruption of compressed and shared extents
  Btrfs: remove unnecessary locking of cleaner_mutex to avoid deadlock
  Btrfs: don't initialize a space info as full to prevent ENOSPC

Merge tag 'nfs-for-4.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:

  Stable patches:
   - fix v4.2 SEEK on files over 2 gigs
   - Fix a layout segment reference leak when pNFS I/O falls back to inband I/O.
   - Fix recovery of recalled read delegations

  Bugfixes:
   - Fix a case where NFSv4 fails to send CLOSE after a server reboot
   - Fix sunrpc to wait for connections to complete before retrying
   - Fix sunrpc races between transport connect/disconnect and shutdown
   - Fix an infinite loop when layoutget fail with BAD_STATEID
   - nfs/filelayout: Fix NULL reference caused by double freeing of fh_array
   - Fix a bogus WARN_ON_ONCE() in O_DIRECT when layout commit_through_mds is set
   - Fix layoutreturn/close ordering issues"

* tag 'nfs-for-4.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS41: make close wait for layoutreturn
  NFS: Skip checking ds_cinfo.buckets when lseg's commit_through_mds is set
  NFSv4.x/pnfs: Don't try to recover stateids twice in layoutget
  NFSv4: Recovery of recalled read delegations is broken
  NFS: Fix an infinite loop when layoutget fail with BAD_STATEID
  NFS: Do cleanup before resetting pageio read/write to mds
  SUNRPC: xs_sock_mark_closed() does not need to trigger socket autoclose
  SUNRPC: Lock the transport layer on shutdown
  nfs/filelayout: Fix NULL reference caused by double freeing of fh_array
  SUNRPC: Ensure that we wait for connections to complete before retrying
  SUNRPC: drop null test before destroy functions
  nfs: fix v4.2 SEEK on files over 2 gigs
  SUNRPC: Fix races between socket connection and destroy code
  nfs: fix pg_test page count calculation
  Failing to send a CLOSE if file is opened WRONLY and server reboots on a 4.x mount

Merge tag 'sound-4.3-rc3' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"This ended up with a larger set of fixes than wished, unfortunately.

  As diffstat shows, the majority of changes are for various ASoC
  drivers (Realtek, Wolfson codec drivers, etc), in addition to a couple
  of HD-audio regression fixes.  All these are reasonably small and
  nothing to scare much"

* tag 'sound-4.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
  ALSA: hda - Disable power_save_node for Thinkpads
  ALSA: hda/tegra - async probe for avoiding module loading deadlock
  ASoC: rt5645: Prevent the pop sound in case of playback and the jack is plugging
  ASoC: rt5645: Increase the delay time to remove the pop sound
  ASoC: rt5645: Use the type SOC_DAPM_SINGLE_AUTODISABLE to prevent the weird sound in runtime of power up
  ASoC: pxa: pxa2xx-ac97: fix dma requestor lines
  MAINTAINERS: Update website and git repo for Wolfson Microelectronics
  ASoC: fsl_ssi: Fix checking of dai format for AC97 mode
  ASoC: wm0010: fix error path
  ASoC: wm0010: fix memory leak
  ASoC: wm8960: correct the max register value of mic boost pga
  ASoC: wm8962: remove 64k sample rate support
  ASoC: davinci-mcasp: Fix devm_kasprintf format string
  ASoC: fix broken pxa SoC support
  ASoC: davinci-mcasp: Set .symmetric_rates = 1 in snd_soc_dai_driver
  ASoC: au1x: psc-i2s: Fix unused variable 'ret' warning
  ASoC: SPEAr: Make SND_SPEAR_SOC select SND_SOC_GENERIC_DMAENGINE_PCM
  ASoC: mediatek: Increase periods_min in capture
  ASoC: davinci-mcasp: Revise the FIFO threshold calculation
  ASoC: wm8960: correct gain value for input PGA and add microphone PGA
  ...

Merge tag 'pci-v4.3-fixes-1' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:
"These are fixes for things we merged for v4.3 (VPD, MSI, and bridge
  window management), and a new Renesas R8A7794 SoC device ID.

  Details:

  Resource management:
   - Revert pci_read_bridge_bases() unification (Bjorn Helgaas)
   - Clear IORESOURCE_UNSET when clipping a bridge window (Bjorn
     Helgaas)

  MSI:
   - Fix MSI IRQ domains for VFs on virtual buses (Alex Williamson)

  Renesas R-Car host bridge driver:
   - Add R8A7794 support (Sergei Shtylyov)

  Miscellaneous:
   - Fix devfn for VPD access through function 0 (Alex Williamson)
   - Use function 0 VPD only for identical functions (Alex Williamson)"

* tag 'pci-v4.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: rcar: Add R8A7794 support
  PCI: Use function 0 VPD for identical functions, regular VPD for others
  PCI: Fix devfn for VPD access through function 0
  PCI/MSI: Fix MSI IRQ domains for VFs on virtual buses
  PCI: Clear IORESOURCE_UNSET when clipping a bridge window
  PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
"AMD fixes for bugs introduced in the 4.2 merge window, and a few PPC
  bug fixes too"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: disable halt_poll_ns as default for s390x
  KVM: x86: fix off-by-one in reserved bits check
  KVM: x86: use correct page table format to check nested page table reserved bits
  KVM: svm: do not call kvm_set_cr0 from init_vmcb
  KVM: x86: trap AMD MSRs for the TSeg base and mask
  KVM: PPC: Book3S: Take the kvm->srcu lock in kvmppc_h_logical_ci_load/store()
  KVM: PPC: Book3S HV: Pass the correct trap argument to kvmhv_commence_exit
  KVM: PPC: Book3S HV: Fix handling of interrupted VCPUs
  kvm: svm: reset mmu on VCPU reset

Merge tag 'powerpc-4.3-3' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
- Wire up sys_membarrier()
- cxl: Fix lockdep warning while creating afu_err_buff from Vaibhav

* tag 'powerpc-4.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
cxl: Fix lockdep warning while creating afu_err_buff attribute
powerpc: Wire up sys_membarrier()

perf tools: Fix copying of /proc/kcore

A copy of /proc/kcore containing the kernel text can be made to the
buildid cache. e.g.

perf buildid-cache -v -k /proc/kcore

To workaround objdump limitations, a copy is also made when annotating
against /proc/kcore.

The copying process stops working from libelf about v1.62 onwards (the
problem was found with v1.63).

The cause is that a call to gelf_getphdr() in kcore__add_phdr() fails
because additional validation has been added to gelf_getphdr().

The use of gelf_getphdr() is a misguided attempt to get default
initialization of the Gelf_Phdr structure. That should not be
necessary because every member of the Gelf_Phdr structure is
subsequently assigned. So just remove the call to gelf_getphdr().

Similarly, a call to gelf_getehdr() in gelf_kcore__init() can be
removed also.

Committer notes:

Note to stable@kernel.org, from Adrian in the cover letter for this
patchkit:

The "Fix copying of /proc/kcore" problem goes back to v3.13 if you think
it is important enough for stable.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1443089122-19082-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf intel-pt: Remove no_force_psb from documentation

no_force_psb was dropped as a late change to the kernel driver.
Consequently, remove it from the documentation.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443089122-19082-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf probe: Use existing routine to look for a kernel module by dso->short_name

We have map_groups__find_by_name() to look at the list of modules that
are in place for a given machine, so use it instead of traversing the
machine dso list, which also includes DSOs for userspace.

When merging the user and kernel DSO lists a bug was introduced where
'perf probe' stopped being able to add probes to modules using its short
name:

  # perf probe -m usbnet --add usbnet_start_xmit
  usbnet_start_xmit is out of .text, skip it.
    Error: Failed to add events.
  #

With this fix it works again:

  # perf probe -m usbnet --add usbnet_start_xmit
  Added new event:
    probe:usbnet_start_xmit (on usbnet_start_xmit in usbnet)

  You can now use it in all perf tools, such as:

   perf record -e probe:usbnet_start_xmit -aR sleep 1
  #

Reported-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: 3d39ac538629 ("perf machine: No need to have two DSOs lists")
Link: http://lkml.kernel.org/r/20150924015008.GE1897@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

KVM: disable halt_poll_ns as default for s390x

We observed some performance degradation on s390x with dynamic
halt polling. Until we can provide a proper fix, let's enable
halt_poll_ns as default only for supported architectures.

Architectures are now free to set their own halt_poll_ns
default value.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: fix off-by-one in reserved bits check

29ecd6601904 ("KVM: x86: avoid uninitialized variable warning",
2015-09-06) introduced a not-so-subtle problem, which probably
escaped review because it was not part of the patch context.

Before the patch, leaf was always equal to iterator.level.  After,
it is equal to iterator.level - 1 in the call to is_shadow_zero_bits_set,
and when is_shadow_zero_bits_set does another "-1" the check on
reserved bits becomes incorrect.  Using "iterator.level" in the call
fixes this call trace:

WARNING: CPU: 2 PID: 17000 at arch/x86/kvm/mmu.c:3385 handle_mmio_page_fault.part.93+0x1a/0x20 [kvm]()
Modules linked in: tun sha256_ssse3 sha256_generic drbg binfmt_misc ipv6 vfat fat fuse dm_crypt dm_mod kvm_amd kvm crc32_pclmul aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd fam15h_power amd64_edac_mod k10temp edac_core amdkfd amd_iommu_v2 radeon acpi_cpufreq
[...]
Call Trace:
  dump_stack+0x4e/0x84
  warn_slowpath_common+0x95/0xe0
  warn_slowpath_null+0x1a/0x20
  handle_mmio_page_fault.part.93+0x1a/0x20 [kvm]
  tdp_page_fault+0x231/0x290 [kvm]
  ? emulator_pio_in_out+0x6e/0xf0 [kvm]
  kvm_mmu_page_fault+0x36/0x240 [kvm]
  ? svm_set_cr0+0x95/0xc0 [kvm_amd]
  pf_interception+0xde/0x1d0 [kvm_amd]
  handle_exit+0x181/0xa70 [kvm_amd]
  ? kvm_arch_vcpu_ioctl_run+0x68b/0x1730 [kvm]
  kvm_arch_vcpu_ioctl_run+0x6f6/0x1730 [kvm]
  ? kvm_arch_vcpu_ioctl_run+0x68b/0x1730 [kvm]
  ? preempt_count_sub+0x9b/0xf0
  ? mutex_lock_killable_nested+0x26f/0x490
  ? preempt_count_sub+0x9b/0xf0
  kvm_vcpu_ioctl+0x358/0x710 [kvm]
  ? __fget+0x5/0x210
  ? __fget+0x101/0x210
  do_vfs_ioctl+0x2f4/0x560
  ? __fget_light+0x29/0x90
  SyS_ioctl+0x4c/0x90
  entry_SYSCALL_64_fastpath+0x16/0x73
---[ end trace 37901c8686d84de6 ]---

Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: use correct page table format to check nested page table reserved bits

Intel CPUID on AMD host or vice versa is a weird case, but it can
happen. Handle it by checking the host CPU vendor instead of the
guest's in reset_tdp_shadow_zero_bits_mask. For speed, the
check uses the fact that Intel EPT has an X (executable) bit while
AMD NPT has NX.

Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: svm: do not call kvm_set_cr0 from init_vmcb

kvm_set_cr0 may want to call kvm_zap_gfn_range and thus access the
memslots array (SRCU protected). Using a mini SRCU critical section
is ugly, and adding it to kvm_arch_vcpu_create doesn't work because
the VMX vcpu_create callback calls synchronize_srcu.

Fixes this lockdep splat:

===============================
[ INFO: suspicious RCU usage. ]
4.3.0-rc1+ #1 Not tainted
-------------------------------
include/linux/kvm_host.h:488 suspicious rcu_dereference_check() usage!

other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
1 lock held by qemu-system-i38/17000:
#0: (&(&kvm->mmu_lock)->rlock){+.+...}, at: kvm_zap_gfn_range+0x24/0x1a0 [kvm]

[...]
Call Trace:
dump_stack+0x4e/0x84
lockdep_rcu_suspicious+0xfd/0x130
kvm_zap_gfn_range+0x188/0x1a0 [kvm]
kvm_set_cr0+0xde/0x1e0 [kvm]
init_vmcb+0x760/0xad0 [kvm_amd]
svm_create_vcpu+0x197/0x250 [kvm_amd]
kvm_arch_vcpu_create+0x47/0x70 [kvm]
kvm_vm_ioctl+0x302/0x7e0 [kvm]
? __lock_is_held+0x51/0x70
? __fget+0x101/0x210
do_vfs_ioctl+0x2f4/0x560
? __fget_light+0x29/0x90
SyS_ioctl+0x4c/0x90
entry_SYSCALL_64_fastpath+0x16/0x73

Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

perf/x86: Change test_aperfmperf() and test_intel() to static

Fixes the following sparse warnings:

arch/x86/kernel/cpu/perf_event_msr.c:13:6: warning: symbol
'test_aperfmperf' was not declared. Should it be static?

arch/x86/kernel/cpu/perf_event_msr.c:18:6: warning: symbol
'test_intel' was not declared. Should it be static?

Signed-off-by: Geliang Tang <geliangtang@163.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/4588e8ab09638458f2451af572827108be3b4a36.1443123796.git.geliangtang@163.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

iscsi-target: Avoid OFMarker + IFMarker negotiation

This patch fixes a v4.2+ regression introduced by commit c04a6091
that removed support for obsolete sync-and-steering markers usage
as originally defined in RFC-3720.

The regression would involve attempting to send OFMarker=No +
IFMarker=No keys during opertional negotiation login phase,
including when initiators did not actually propose these keys.

The result for MSFT iSCSI initiators would be random junk in
TCP stream after the last successful login request was been sent
signaling the move to full feature phase (FFP) operation.

To address this bug, go ahead and avoid negotiating these keys
by default unless the initiator explicitly proposes them, but
still respond to them with 'No' if they are proposed.

Reported-by: Dragan Milivojević <galileo@pkm-inc.com>
Bisected-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Tested-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

target: Make TCM_WRITE_PROTECT failure honor D_SENSE bit

This patch changes transport_lookup_cmd_lun() to obtain
se_lun->lun_ref + se_cmd->se_device rcu_dereference during
TCM_WRITE_PROTECT -> CHECK_CONDITION failure status.

Do this to ensure the active control D_SENSE mode page bit
is being honored.

Reported-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

target: Fix target_sense_desc_format NULL pointer dereference

This patch allows target_sense_desc_format() to be called without a
valid se_device pointer, which can occur during an early exception
ahead of transport_lookup_cmd_lun() setting up se_cmd->se_device.

This addresses a v4.3-rc1 specific NULL pointer dereference
regression introduced by commit 4e4937e8.

Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

target: Propigate backend read-only to core_tpg_add_lun

This patch adds a DF_READ_ONLY flag that is used by IBLOCK to
signal when a backend has been set to read-only mode, in order
to propigate read-only status up to core_tpg_add_lun() for all
future LUN fabric exports.

With this is place, existing emulation for reporting read-only
in spc_emulate_modesense() and normal transport_lookup_cmd_lun()
TCM_WRITE_PROTECTED status checking just works as expected.

Reported-by: Joeue Deng <joeue404@gmail.com>
Reported-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

target: Fix PR registration + APTPL RCU conversion regression

This patch fixes a v4.2+ regression introduced by commit 79dc9c9e86
where lookup of t10_pr_registration->pr_reg_deve and associated
->pr_kref get was missing from __core_scsi3_do_alloc_registration(),
which is responsible for setting DEF_PR_REG_ACTIVE.

This would result in REGISTER operations completing successfully,
but subsequent core_scsi3_pr_seq_non_holder() checking would fail
with !DEF_PR_REG_ACTIVE -> RESERVATION CONFLICT status.

Update __core_scsi3_add_registration() to drop ->pr_kref reference
after registration and any optional ALL_TG_PT=1 processing has
completed. Update core_scsi3_decode_spec_i_port() to release
the new parent local_pr_reg->pr_kref as well.

Also, update __core_scsi3_check_aptpl_registration() to perform
the same target_nacl_find_deve() lookup + ->pr_kref get, now that
__core_scsi3_add_registration() expects to drop the reference.

Finally, since there are cases when se_dev_entry->se_lun_acl can
still be dereferenced in core_scsi3_lunacl_undepend_item() while
holding ->pr_kref, go ahead and move explicit rcu_assign_pointer()
NULL assignments within core_disable_device_list_for_node() until
after orig->pr_comp finishes.

Reported-by: Scott L. Lykens <scott@lykens.org>
Tested-by: Scott L. Lykens <scott@lykens.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Lee Duncan <lduncan@suse.com>
Cc: <stable@vger.kernel.org> # v4.2+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Merge branch 'phy-mdio-refcnt'

Russell King says:

====================
Phy, mdiobus, and netdev struct device fixes

The third version of this series fixes the build error which David
identified, and drops the broken changes for the Cavium Thunger BGX
ethernet driver as this driver requires some complex changes to
resolve the leakage - and this is best done by people who can test
the driver.

Compared to v2, the only patch which has changed is patch 6
  "net: fix phy refcounting in a bunch of drivers"

I _think_ I've been able to build-test all the drivers touched by
that patch to some degree now, though several of them needed the
Kconfig hacked to allow it (not all had || COMPILE_TEST clause on
their dependencies.)

Previous cover letters below:

This is the second version of the series, with the comments David had
on the first patch fixed up.  Original series description with updated
diffstat below.

While looking at the DSA code, I noticed we have a
of_find_net_device_by_node(), and it looks like users of that are
similarly buggy - it looks like net/dsa/dsa.c is the only user.  Fix
that too.

Hi,

While looking at the phy code, I identified a number of weaknesses
where refcounting on device structures was being leaked, where
modules could be removed while in-use, and where the fixed-phy could
end up having unintended consequences caused by incorrect calls to
fixed_phy_update_state().

This patch series resolves those issues, some of which were discovered
with testing on an Armada 388 board.  Not all patches are fully tested,
particularly the one which touches several network drivers.

When resolving the struct device refcounting problems, several different
solutions were considered before settling on the implementation here -
one of the considerations was to avoid touching many network drivers.
The solution here is:

phy_attach*() - takes a refcount
phy_detach*() - drops the phy_attach refcount

Provided drivers always attach and detach their phys, which they should
already be doing, this should change nothing, even if they leak a refcount.

of_phy_find_device() and of_* functions which use that take
a refcount.  Arrange for this refcount to be dropped once
the phy is attached.

This is the reason why the previous change is important - we can't drop
this refcount taken by of_phy_find_device() until something else holds
a reference on the device.  This resolves the leaked refcount caused by
using of_phy_connect() or of_phy_attach().

Even without the above changes, these drivers are leaking by calling
of_phy_find_device().  These drivers are addressed by adding the
appropriate release of that refcount.

The mdiobus code also suffered from the same kind of leak, but thankfully
this only happened in one place - the mdio-mux code.

I also found that the try_module_get() in the phy layer code was utterly
useless: phydev->dev.driver was guaranteed to always be NULL, so
try_module_get() was always being called with a NULL argument.  I proved
this with my SFP code, which declares its own MDIO bus - the module use
count was never incremented irrespective of how I set the MDIO bus up.
This allowed the MDIO bus code to be removed from the kernel while there
were still PHYs attached to it.

One other bug was discovered: while using in-band-status with mvneta, it
was found that if a real phy is attached with in-band-status enabled,
and another ethernet interface is using the fixed-phy infrastructure, the
interface using the fixed-phy infrastructure is configured according to
the other interface using the in-band-status - which is caused by the
fixed-phy code not verifying that the phy_device passed in is actually
a fixed-phy device, rather than a real MDIO phy.

Lastly, having mdio_bus reversing phy_device_register() internals seems
like a layering violation - it's trivial to move that code to the phy
device layer.
====================

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fix net_device refcounting

of_find_net_device_by_node() uses class_find_device() internally to
lookup the corresponding network device. class_find_device() returns
a reference to the embedded struct device, with its refcount
incremented.

Add a comment to the definition in net/core/net-sysfs.c indicating the
need to drop this refcount, and fix the DSA code to drop this refcount
when the OF-generated platform data is cleaned up and freed. Also
arrange for the ref to be dropped when handling errors.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

phy: add phy_device_remove()

Add a phy_device_remove() function to complement phy_device_register(),
which undoes the effects of phy_device_register() by removing the phy
device from visibility, but not freeing it.

This allows these details to be moved out of the mdio bus code into
the phy code where this action belongs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

phy: fixed-phy: properly validate phy in fixed_phy_update_state()

Validate that the phy_device passed into fixed_phy_update_state() is a
fixed-phy device before walking the list of phys for a fixed phy at the
same address.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fix phy refcounting in a bunch of drivers

of_phy_find_device() increments the phy struct device refcount, which
we need to properly balance. Add code to network drivers using this
function to ensure that the struct device refcount is correctly
balanced.

For xgene, looking back in the history, we should be able to use
of_phy_connect() with a zero flags argument for the DT case as this is
how the driver used to operate prior to de7b5b3d790a ("net: eth: xgene:
change APM X-Gene SoC platform ethernet to support ACPI").

This leaves the Cavium Thunder BGX unfixed; fixing this driver is a
complicated task, one which the maintainers need to be involved with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_mdio: fix MDIO phy device refcounting

bus_find_device() is defined as:

* This is similar to the bus_for_each_dev() function above, but it
* returns a reference to a device that is 'found' for later use, as
* determined by the @match callback.

and it does indeed return a reference-counted pointer to the device:

        while ((dev = next_device(&i)))
                if (match(dev, data) && get_device(dev))
                                        ^^^^^^^^^^^^^^^
                        break;
        klist_iter_exit(&i);
        return dev;

What that means is that when we're done with the struct device, we must
drop that reference.  Neither of_phy_connect() nor of_phy_attach() did
this when phy_connect_direct() or phy_attach_direct() failed.

With our previous patch, phy_connect_direct() and phy_attach_direct()
take a new refcount on the phy device when successful, so we can drop
our local reference immediatley after these functions, whether or not
they succeeded.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

phy: add proper phy struct device refcounting

Take a refcount on the phy struct device when the phy device is attached
to a network device, and drop it after it's detached. This ensures that
a refcount is held on the phy device while the device is being used by
a network device, thereby preventing the phy_device from being
unexpectedly kfree()'d by phy_device_release().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

phy: fix mdiobus module safety

Re-implement the mdiobus module refcounting to ensure that we actually
ensure that the mdiobus module code does not go away while we might call
into it.

The old scheme using bus->dev.driver was buggy, because bus->dev is a
class device which never has a struct device_driver associated with it,
and hence the associated code trying to obtain a refcount did nothing
useful.

Instead, take the approach that other subsystems do: pass the module
when calling mdiobus_register(), and record that in the mii_bus struct.
When we need to increment the module use count in the phy code, use
this stored pointer. When the phy is deteched, drop the module
refcount, remembering that the phy device might go away at that point.

This doesn't stop the mii_bus going away while there are in-use phys -
it merely stops the underlying code vanishing.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: fix of_mdio_find_bus() device refcount leak

Current users of of_mdio_find_bus() leak a struct device refcount, as
they fail to clean up the reference obtained inside class_find_device().

Fix the DSA code to properly refcount the returned MDIO bus by:
1. taking a reference on the struct device whenever we assign it to
pd->chip[x].host_dev.
2. dropping the reference when we overwrite the existing reference.
3. dropping the reference when we free the data structure.
4. dropping the initial reference we obtained after setting up the
platform data structure, or on failure.

In step 2 above, where we obtain a new MDIO bus, there is no need to
take a reference on it as we would only have to drop it immediately
after assignment again, iow:

put_device(cd->host_dev); /* drop original assignment ref */
cd->host_dev = get_device(&mdio_bus_switch->dev); /* get our ref */
put_device(&mdio_bus_switch->dev); /* drop of_mdio_find_bus ref */

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

phy: fix of_mdio_find_bus() device refcount leak

of_mdio_find_bus() leaks a struct device refcount, caused by using
class_find_device() and not realising that the device reference has
its refcount incremented:

* Note, you will need to drop the reference with put_device() after use.
...
        while ((dev = class_dev_iter_next(&iter))) {
                if (match(dev, data)) {
                        get_device(dev);
                        break;
                }

Update the comment, and arrange for the phy code to drop this refcount
when disposing of a reference to it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'next' of git://git./linux/kernel/git/rzhang/linux

Pull thermal management fixes from Zhang Rui:

- Power allocator governor changes to allow binding on thermal zones
   with missing power estimates information.  From Javi Merino.

- Add compile test flags on thermal drivers that allow it without
   producing compilation errors.  From Eduardo Valentin.

- Fixes around memory allocation on cpu_cooling.  From Javi Merino.

- Fix on db8500 cpufreq code to allow autoload.  From Luis de
   Bethencourt.

- Maintainer entries for cpu cooling device

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: power_allocator: exit early if there are no cooling devices
  thermal: power_allocator: don't require tzp to be present for the thermal zone
  thermal: power_allocator: relax the requirement of two passive trip points
  thermal: power_allocator: relax the requirement of a sustainable_power in tzp
  thermal: Add a function to get the minimum power
  thermal: cpu_cooling: free power table on error or when unregistering
  thermal: cpu_cooling: don't call kcalloc() under rcu_read_lock
  thermal: db8500_cpufreq_cooling: Fix module autoload for OF platform driver
  thermal: cpu_cooling: Add MAINTAINERS entry
  thermal: ti-soc: Kconfig fix to avoid menu showing wrongly
  thermal: ti-soc: allow compile test
  thermal: qcom_spmi: allow compile test
  thermal: exynos: allow compile test
  thermal: armada: allow compile test
  thermal: dove: allow compile test
  thermal: kirkwood: allow compile test
  thermal: rockchip: allow compile test
  thermal: spear: allow compile test
  thermal: hisi: allow compile test
  thermal: Fix thermal_zone_of_sensor_register to match documentation

Merge tag 'devicetree-fixes-for-4.3' of git://git./linux/kernel/git/robh/linux

Pull DeviceTree fixes from Rob Herring:
- Silence bogus warning for of_irq_parse_pci
- Fix typo in ARM idle-states binding doc and dts files
- Various minor binding documentation updates

* tag 'devicetree-fixes-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  Documentation: arm: Fix typo in the idle-states bindings examples
  gpio: mention in DT binding doc that <name>-gpio is deprecated
  of_pci_irq: Silence bogus "of_irq_parse_pci() failed ..." messages.
  devicetree: bindings: Extend the bma180 bindings with bma250 info
  of: thermal: Mark cooling-*-level properties optional
  of: thermal: Fix inconsitency between cooling-*-state and cooling-*-level
  Docs: dt: add #msi-cells to GICv3 ITS binding
  of: add vendor prefix for Socionext Inc.

Merge tag 'v4.3-rockchip32-dtsfixes1' of git://git./linux/kernel/git/mmind/linux-rockchip into fixes

Add the ddc-i2c-bus reference to the veyron hdmi nodes,
so that they can read the edid of connected displays.

* tag 'v4.3-rockchip32-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: Add ddc i2c reference to veyron

Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: sti: dt: adapt DT to fix probe/bind issues in DRM driver

STI drm drivers probe and bind using component framework was incorrect.
In addition to drivers fix DT update is needed to make all sub-components
become childs of sti-display-subsystem.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-fixes-for-4.3-rc1' of git://codeaurora.org/quic/kernel/agross-msm into fixes

Qualcomm fixes for v4.3-rc1

* Add SCM function call stubs on ARM64

* tag 'qcom-fixes-for-4.3-rc1' of git://codeaurora.org/quic/kernel/agross-msm:
firmware: qcom: scm: Add function stubs for ARM64

Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: dts: fix omap2+ address translation for pbias

"ARM: dts: <omap2/omap4/omap5/dra7>: add minimal l4 bus
layout with control module support" moved pbias_regulator dt node
from being a child node of ocp to be the child node of
'syscon'. Since 'syscon' doesn't have the 'ranges' property,
address translation fails while trying to convert the address
to resource. Fix it here by populating 'ranges' property in
syscon dt node.

Fixes: 72b10ac00eb1 ("ARM: dts: omap24xx: add minimal l4 bus
layout with control module support")

Fixes: 7415b0b4c645 ("ARM: dts: omap4: add minimal l4 bus layout
with control module support")

Fixes: ed8509edddeb ("ARM: dts: omap5: add minimal l4 bus
layout with control module support")

Fixes: d919501feffa ("ARM: dts: dra7: add minimal l4 bus
layout with control module support")

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[tony@atomide.com: fixed omap3 pbias to work]
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge commit 'b8c93646fd5c' into omap-for-v4.3/fixes

ip6_tunnel: Reduce log level in ip6_tnl_err() to debug

Currently error log messages in ip6_tnl_err are printed at 'warn'
level. This is different to other tunnel types which don't print
any messages. These log messages don't provide any information that
couldn't be deduced with networking tools. Also it can be annoying
to have one end of the tunnel go down and have the logs fill with
pointless messages such as "Path to destination invalid or inactive!".

This patch reduces the log level of these messages to 'dbg' level to
bring the visible behaviour into line with other tunnel types.

Signed-off-by: Matt Bennett <matt.bennett@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation: arm: Fix typo in the idle-states bindings examples

The idle-states bindings mandate that the entry-method string
in the idle-states node must be "psci" for ARM v8 64-bit systems,
but the examples in the bindings report a wrong entry-method string.
Owing to this typo, some dts in the kernel wrongly defined the
entry-method property, since they likely cut and pasted the example
definition without paying attention to the bindings definitions.

This patch fixes the typo in the DT idle states bindings examples and
respective dts in the kernel so that the bindings and related dts
files are made compliant.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Howard Chen <howard.chen@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rob Herring <robh@kernel.org>

gpio: mention in DT binding doc that <name>-gpio is deprecated

The gpiolib supports parsing DT properties of the form <name>-gpio but it
was only added for compatibility with older DT bindings that got it wrong
and should not be used in newer bindings.

The commit that added support for this was:

dd34c37aa3e8 ("gpio: of: Allow -gpio suffix for property names")

but didn't update the documentation to explain this so it's been a source
of confusion. So let's make this clear in the GPIO DT binding doc.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
"Most of the GPU drivers people were at XDC last week, so I didn't get
  much to send, so I let it rollover until this week.

  Also Alex was away for 3 weeks so amdgpu/radeon got a bit more stuff
  than usual in one go.

  I've been trying to figure out some 4.2 issues with i915 still (that
  are fixed in 4.3, but bisecting ends up in a merge commit).  Hopefully
  next week I or i915 people can work that out"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (46 commits)
  drm: Allow also control clients to check the drm version
  drm/vmwgfx: Fix uninitialized return in vmw_kms_helper_dirty()
  drm/vmwgfx: Fix uninitialized return in vmw_cotable_unbind()
  drm/layerscape: fix handling fsl_dcu_drm_plane_index result
  drm/mgag200: Fix driver_load error handling
  drm/mgag200: Fix error handling paths in fbdev driver
  drm/qxl: only report first monitor as connected if we have no state
  drm/radeon: add quirk for MSI R7 370
  drm/amdgpu: Sprinkle drm_modeset_lock_all to appease locking checks
  drm/radeon: Sprinkle drm_modeset_lock_all to appease locking checks
  drm/amdgpu: sync ce and me with SWITCH_BUFFER(2)
  drm/amdgpu: integer overflow in amdgpu_mode_dumb_create()
  drm/amdgpu: info leak in amdgpu_gem_metadata_ioctl()
  drm/amdgpu: integer overflow in amdgpu_info_ioctl()
  drm/amdgpu: unwind properly in amdgpu_cs_parser_init()
  drm/amdgpu: Fix max_vblank_count value for current display engines
  drm/amdgpu: use kmemdup rather than duplicating its implementation
  drm/amdgpu: fix UVD suspend and resume for VI APU
  drm/amdgpu: fix the UVD suspend sequence order
  drm/amdgpu: make UVD handle checking more strict
  ...

Merge tag 'mac80211-for-davem-2015-09-22' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Just two small fixes:
* VHT MCS mask array overrun, reported by Dan Carpenter
* reset CQM history to always get a notification, from Sara Sharon
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_gre: Reduce log level in ip6gre_err() to debug

Currently error log messages in ip6gre_err are printed at 'warn'
level. This is different to most other tunnel types which don't
print any messages. These log messages don't provide any information
that couldn't be deduced with networking tools. Also it can be annoying
to have one end of the tunnel go down and have the logs fill with
pointless messages such as "Path to destination invalid or inactive!".

This patch reduces the log level of these messages to 'dbg' level to
bring the visible behaviour into line with other tunnel types.

Signed-off-by: Matt Bennett <matt.bennett@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>

fib_rules: fix fib rule dumps across multiple skbs

dump_rules returns skb length and not error.
But when family == AF_UNSPEC, the caller of dump_rules
assumes that it returns an error. Hence, when family == AF_UNSPEC,
we continue trying to dump on -EMSGSIZE errors resulting in
incorrect dump idx carried between skbs belonging to the same dump.
This results in fib rule dump always only dumping rules that fit
into the first skb.

This patch fixes dump_rules to return error so that we exit correctly
and idx is correctly maintained between skbs that are part of the
same dump.

Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PCI: rcar: Add R8A7794 support

Add Renesas R8A7794 SoC support to the Renesas R-Car gen2 PCI driver.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>

PCI: Use function 0 VPD for identical functions, regular VPD for others

932c435caba8 ("PCI: Add dev_flags bit to access VPD through function 0")
added PCI_DEV_FLAGS_VPD_REF_F0. Previously, we set the flag on every
non-zero function of quirked devices. If a function turned out to be
different from function 0, i.e., it had a different class, vendor ID, or
device ID, the flag remained set but we didn't make VPD accessible at all.

Flip this around so we only set PCI_DEV_FLAGS_VPD_REF_F0 for functions that
are identical to function 0, and allow regular VPD access for any other
functions.

[bhelgaas: changelog, stable tag]
Fixes: 932c435caba8 ("PCI: Add dev_flags bit to access VPD through function 0")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Acked-by: Myron Stowe <myron.stowe@redhat.com>
Acked-by: Mark Rustad <mark.d.rustad@intel.com>
CC: stable@vger.kernel.org

PCI: Fix devfn for VPD access through function 0

Commit 932c435caba8 ("PCI: Add dev_flags bit to access VPD through function
0") passes PCI_SLOT(devfn) for the devfn parameter of pci_get_slot().
Generally this works because we're fairly well guaranteed that a PCIe
device is at slot address 0, but for the general case, including
conventional PCI, it's incorrect. We need to get the slot and then convert
it back into a devfn.

Fixes: 932c435caba8 ("PCI: Add dev_flags bit to access VPD through function 0")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Acked-by: Myron Stowe <myron.stowe@redhat.com>
Acked-by: Mark Rustad <mark.d.rustad@intel.com>
CC: stable@vger.kernel.org

PCI/MSI: Fix MSI IRQ domains for VFs on virtual buses

SR-IOV creates a virtual bus where bus->self is NULL. When we add VFs and
scan for an MSI domain, pci_set_bus_msi_domain() dereferences bus->self,
which causes a kernel NULL pointer dereference oops.

Scan up to the parent bus until we find a real bridge where we can get the
MSI domain.

[bhelgaas: changelog]
Fixes: 44aa0c657e3e ("PCI/MSI: Add hooks to populate the msi_domain field")
Tested-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>

bnx2x: byte swap rss_key to comply to Toeplitz specs

After a good amount of debugging, I found bnx2x was byte swaping
the 40 bytes of rss_key.

If we byte swap the key, then bnx2x generates hashes matching
MSDN specs as documented in (Verifying the RSS Hash Calculation)

https://msdn.microsoft.com/en-us/library/windows/hardware/ff571021%
28v=vs.85%29.aspx

It is mostly a non issue, unless we want to mix different NIC
in a host, and want consistent hashing among all of them, ie
if they all use the boot time generated rss key, or if some application
is choosing specific tuple(s) so that incoming traffic lands into known
rx queue(s).

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: revert "net_sched: move tp->root allocation into fw_init()"

fw filter uses tp->root==NULL to check if it is the old method,
so it doesn't need allocation at all in this case. This patch
reverts the offending commit and adds some comments for old
method to make it obvious.

Fixes: 33f8b9ecdb15 ("net_sched: move tp->root allocation into fw_init()")
Reported-by: Akshat Kakkar <akshat.1984@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"15 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  ocfs2/dlm: fix deadlock when dispatch assert master
  membarrier: clean up selftest
  vmscan: fix sane_reclaim helper for legacy memcg
  lib/iommu-common.c: do not try to deref a null iommu->lazy_flush() pointer when n < pool->hint
  x86, efi, kasan: #undef memset/memcpy/memmove per arch
  mm: migrate: hugetlb: putback destination hugepage to active list
  mm, dax: VMA with vm_ops->pfn_mkwrite wants to be write-notified
  userfaultfd: register uapi generic syscall (aarch64)
  userfaultfd: selftest: don't error out if pthread_mutex_t isn't identical
  userfaultfd: selftest: return an error if BOUNCE_VERIFY fails
  userfaultfd: selftest: avoid my_bcmp false positives with powerpc
  userfaultfd: selftest: only warn if __NR_userfaultfd is undefined
  userfaultfd: selftest: headers fixup
  userfaultfd: selftests: vm: pick up sanitized kernel headers
  userfaultfd: revert "userfaultfd: waitqueue: add nr wake parameter to __wake_up_locked_key"

Merge branch 'lwt_arp'

Jiri Benc says:

====================
lwtunnel: make it really work, for IPv4

One of the selling points of lwtunnel was the ability to specify the tunnel
destination using routes. However, this doesn't really work currently, as
ARP and ndisc replies are not handled correctly. ARP and ndisc replies won't
have tunnel metadata attached, thus they will be sent out with the default
parameters or not sent at all, either way never reaching the requester.

Most of the egress tunnel parameters can be inferred from the ingress
metada. The only and important exception is UDP ports. This patchset infers
the egress data from the ingress data and disallow settings of UDP ports in
tunnel routes. If there's a need for different UDP ports, a new interface
needs to be created for each port combination. Note that it's still possible
to specify the UDP ports to use, it just needs to be done while creating the
vxlan/geneve interface.

This covers only ARPs. IPv6 ndisc has the same problem but is harder to
solve, as there's already dst attached to outgoing skbs. Ideas to solve this
are welcome.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

lwtunnel: remove source and destination UDP port config option

The UDP tunnel config is asymmetric wrt. to the ports used. The source and
destination ports from one direction of the tunnel are not related to the
ports of the other direction. We need to be able to respond to ARP requests
using the correct ports without involving routing.

As the consequence, UDP ports need to be fixed property of the tunnel
interface and cannot be set per route. Remove the ability to set ports per
route. This is still okay to do, as no kernel has been released with these
attributes yet.

Note that the ability to specify source and destination ports is preserved
for other users of the lwtunnel API which don't use routes for tunnel key
specification (like openvswitch).

If in the future we rework ARP handling to allow port specification, the
attributes can be added back.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: send arp replies to the correct tunnel

When using ip lwtunnels, the additional data for xmit (basically, the actual
tunnel to use) are carried in ip_tunnel_info either in dst->lwtstate or in
metadata dst. When replying to ARP requests, we need to send the reply to
the same tunnel the request came from. This means we need to construct
proper metadata dst for ARP replies.

We could perform another route lookup to get a dst entry with the correct
lwtstate. However, this won't always ensure that the outgoing tunnel is the
same as the incoming one, and it won't work anyway for IPv4 duplicate
address detection.

The only thing to do is to "reverse" the ip_tunnel_info.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: gianfar: remove misuse of IRQF_NO_SUSPEND flag

The device is set as wakeup capable using proper wakeup API but the
driver misuses IRQF_NO_SUSPEND to set the interrupt as wakeup source
which is incorrect.

This patch removes the use of IRQF_NO_SUSPEND flags replacing it with
enable_irq_wake instead.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Claudiu Manoil <claudiu.manoil@freescale.com>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skbuff: Fix skb checksum flag on skb pull

VXLAN device can receive skb with checksum partial. But the checksum
offset could be in outer header which is pulled on receive. This results
in negative checksum offset for the skb. Such skb can cause the assert
failure in skb_checksum_help(). Following patch fixes the bug by setting
checksum-none while pulling outer header.

Following is the kernel panic msg from old kernel hitting the bug.

------------[ cut here ]------------
kernel BUG at net/core/dev.c:1906!
RIP: 0010:[<ffffffff81518034>] skb_checksum_help+0x144/0x150
Call Trace:
<IRQ>
[<ffffffffa0164c28>] queue_userspace_packet+0x408/0x470 [openvswitch]
[<ffffffffa016614d>] ovs_dp_upcall+0x5d/0x60 [openvswitch]
[<ffffffffa0166236>] ovs_dp_process_packet_with_key+0xe6/0x100 [openvswitch]
[<ffffffffa016629b>] ovs_dp_process_received_packet+0x4b/0x80 [openvswitch]
[<ffffffffa016c51a>] ovs_vport_receive+0x2a/0x30 [openvswitch]
[<ffffffffa0171383>] vxlan_rcv+0x53/0x60 [openvswitch]
[<ffffffffa01734cb>] vxlan_udp_encap_recv+0x8b/0xf0 [openvswitch]
[<ffffffff8157addc>] udp_queue_rcv_skb+0x2dc/0x3b0
[<ffffffff8157b56f>] __udp4_lib_rcv+0x1cf/0x6c0
[<ffffffff8157ba7a>] udp_rcv+0x1a/0x20
[<ffffffff8154fdbd>] ip_local_deliver_finish+0xdd/0x280
[<ffffffff81550128>] ip_local_deliver+0x88/0x90
[<ffffffff8154fa7d>] ip_rcv_finish+0x10d/0x370
[<ffffffff81550365>] ip_rcv+0x235/0x300
[<ffffffff8151ba1d>] __netif_receive_skb+0x55d/0x620
[<ffffffff8151c360>] netif_receive_skb+0x80/0x90
[<ffffffff81459935>] virtnet_poll+0x555/0x6f0
[<ffffffff8151cd04>] net_rx_action+0x134/0x290
[<ffffffff810683d8>] __do_softirq+0xa8/0x210
[<ffffffff8162fe6c>] call_softirq+0x1c/0x30
[<ffffffff810161a5>] do_softirq+0x65/0xa0
[<ffffffff810687be>] irq_exit+0x8e/0xb0
[<ffffffff81630733>] do_IRQ+0x63/0xe0
[<ffffffff81625f2e>] common_interrupt+0x6e/0x6e

Reported-by: Anupam Chanda <achanda@vmware.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'drm-intel-fixes-2015-09-24' of git://anongit.freedesktop.org/drm-intel into drm-fixes

a few drm/i915 fixes, including a fix to the recent regression
reported by Sedat Dilek

* tag 'drm-intel-fixes-2015-09-24' of git://anongit.freedesktop.org/drm-intel:
  drm/i915/bios: handle MIPI Sequence Block v3+ gracefully
  drm/i915: Add primary plane to mask if it's visible
  drm/i915: workaround bad DSL readout v3
  drm/i915: fix kernel-doc warnings in intel_audio.c

cgroup, writeback: don't enable cgroup writeback on traditional hierarchies

inode_cgwb_enabled() gates cgroup writeback support.  If it returns
true, each inode is attached to the corresponding memory domain which
gets mapped to io domain.  It currently only tests whether the
filesystem and bdi support cgroup writeback; however, cgroup writeback
support doesn't work on traditional hierarchies and thus it should
also test whether memcg and iocg are on the default hierarchy.

This caused traditional hierarchy setups to hit the cgroup writeback
path inadvertently and ended up creating separate writeback domains
for each memcg and mapping them all to the root iocg uncovering a
couple issues in the cgroup writeback path.

cgroup writeback was never meant to be enabled on traditional
hierarchies.  Make inode_cgwb_enabled() test whether both memcg and
iocg are on the default hierarchy.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Artem Bityutskiy <dedekind1@gmail.com>
Reported-by: Dexuan Cui <decui@microsoft.com>
Link: http://lkml.kernel.org/g/1443012552.19983.209.camel@gmail.com
Link: http://lkml.kernel.org/g/f30d4a6aa8a546ff88f73021d026a453@SIXPR30MB031.064d.mgd.msft.net

netlink: Replace rhash_portid with bound

On Mon, Sep 21, 2015 at 02:20:22PM -0400, Tejun Heo wrote:
>
> store_release and load_acquire are different from the usual memory
> barriers and can't be paired this way.  You have to pair store_release
> and load_acquire.  Besides, it isn't a particularly good idea to

OK I've decided to drop the acquire/release helpers as they don't
help us at all and simply pessimises the code by using full memory
barriers (on some architectures) where only a write or read barrier
is needed.

> depend on memory barriers embedded in other data structures like the
> above.  Here, especially, rhashtable_insert() would have write barrier
> *before* the entry is hashed not necessarily *after*, which means that
> in the above case, a socket which appears to have set bound to a
> reader might not visible when the reader tries to look up the socket
> on the hashtable.

But you are right we do need an explicit write barrier here to
ensure that the hashing is visible.

> There's no reason to be overly smart here.  This isn't a crazy hot
> path, write barriers tend to be very cheap, store_release more so.
> Please just do smp_store_release() and note what it's paired with.

It's not about being overly smart.  It's about actually understanding
what's going on with the code.  I've seen too many instances of
people simply sprinkling synchronisation primitives around without
any knowledge of what is happening underneath, which is just a recipe
for creating hard-to-debug races.

> > @@ -1539,7 +1546,7 @@ static int netlink_bind(struct socket *sock, struct sockaddr *addr,
> >   }
> >   }
> >
> > - if (!nlk->portid) {
> > + if (!nlk->bound) {
>
> I don't think you can skip load_acquire here just because this is the
> second deref of the variable.  That doesn't change anything.  Race
> condition could still happen between the first and second tests and
> skipping the second would lead to the same kind of bug.

The reason this one is OK is because we do not use nlk->portid or
try to get nlk from the hash table before we return to user-space.

However, there is a real bug here that none of these acquire/release
helpers discovered.  The two bound tests here used to be a single
one.  Now that they are separate it is entirely possible for another
thread to come in the middle and bind the socket.  So we need to
repeat the portid check in order to maintain consistency.

> > @@ -1587,7 +1594,7 @@ static int netlink_connect(struct socket *sock, struct sockaddr *addr,
> >       !netlink_allowed(sock, NL_CFG_F_NONROOT_SEND))
> >   return -EPERM;
> >
> > - if (!nlk->portid)
> > + if (!nlk->bound)
>
> Don't we need load_acquire here too?  Is this path holding a lock
> which makes that unnecessary?

Ditto.

---8<---
The commit 1f770c0a09da855a2b51af6d19de97fb955eca85 ("netlink:
Fix autobind race condition that leads to zero port ID") created
some new races that can occur due to inconcsistencies between the
two port IDs.

Tejun is right that a barrier is unavoidable.  Therefore I am
reverting to the original patch that used a boolean to indicate
that a user netlink socket has been bound.

Barriers have been added where necessary to ensure that a valid
portid and the hashed socket is visible.

I have also changed netlink_insert to only return EBUSY if the
socket is bound to a portid different to the requested one.  This
combined with only reading nlk->bound once in netlink_bind fixes
a race where two threads that bind the socket at the same time
with different port IDs may both succeed.

Fixes: 1f770c0a09da ("netlink: Fix autobind race condition that leads to zero port ID")
Reported-by: Tejun Heo <tj@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Nacked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ALSA: hda - Disable power_save_node for Thinkpads

Lenovo Thinkpads with recent Realtek codecs seem suffering from click
noises at power transition since the introduction of widget power
saving in 4.1 kernel.  Although this might be solved by some delays in
appropriate points, as a quick workaround, just disable the
power_save_node feature for now.  The gain it gives is relatively
small, and this makes the situation back to pre 4.1 time.

This patch ended up with a bit more code changes than usual because
the existing fixup for Thinkpads is highly chained.  Instead of adding
yet another chain, combine a few of them into a single fixup entry, as
a gratis cleanup.

Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=943982
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v4.3-rc2' of git://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.3

A disappointingly large set of fixes, though none of them very big and
very widely spread over many different drivers. Nothing especially
stands out, it's mostly all device specific and relatively minor.

Merge tag 'spi-fix-v4.3-rc2' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
"A disappointingly large collection of fixes for SPI issues, though
  almost all in drivers (and there mainly the newly added Mediatek
  driver) and the core fixes are documentation and error handling.

  The driver fixes are all of the usual 'important if you see them'
  variety"

* tag 'spi-fix-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: xtensa-xtfpga: fix register endianness
  spi: meson: Fix module autoload for OF platform driver
  spi: mediatek: fix wrong error return value on probe
  spi: fix kernel-doc warnings in spi.h
  spi: spidev: fix possible NULL dereference
  spi: atmel: remove warning when !CONFIG_PM_SLEEP
  spi: bcm2835: BUG: fix wrong use of PAGE_MASK
  spi: mediatek: fix spi cs polarity error
  spi: Fix documentation of spi_alloc_master()
  spi: spi-pxa2xx: Check status register to determine if SSSR_TINT is disabled
  spi: Mediatek: Document devicetree bindings update for spi bus
  spi: mediatek: fix spi clock usage error
  spi: mediatek: remove clk_disable_unprepare()

Merge tag 'regulator-fix-v4.3-rc2' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
"A collection of fixes that came in since I tagged the merge window
  pull request for v4.3:

   - Error handling fixes in the core

   - Fixes to a couple of TI drivers for device specific issues

   - Several fixes for module autoloading"

* tag 'regulator-fix-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: vexpress: Fix module autoload for OF platform driver
  regulator: gpio: Fix module autoload for OF platform driver
  regulator: anatop: Fix module autoload for OF platform driver
  regulator: core: Correct return value check in regulator_resolve_supply
  regulator: tps65218: Fix missing zero typo
  regulator: pbias: program pbias register offset in pbias driver
  regulator: core: fix possible NULL dereference

Merge tag 'dm-4.3-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:
"Two stable@ fixes:

   - DM thinp fix to properly advertise discard support as disabled for
     thin devices backed by a thin-pool with discard support disabled.

   - DM crypt fix to prevent the creation of bios that violate the
     underlying block device's max_segments limits.  This fixes a
     relatively long-standing NCQ SSD corruption issue reported against
     dm-crypt ever since the dm-crypt cpu parallelization patches were
     merged back in 4.0"

* tag 'dm-4.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm crypt: constrain crypt device's max_segment_size to PAGE_SIZE
  dm thin: disable discard support for thin devices if pool's is disabled

ALSA: hda/tegra - async probe for avoiding module loading deadlock

The Tegra HD-audio controller driver causes deadlocks when loaded as a
module since the driver invokes request_module() at binding with the
codec driver. This patch works around it by deferring the probe in a
work like Intel HD-audio controller driver does. Although hovering
the codec probe stuff into udev would be a better solution, it may
cause other regressions, so let's try this band-aid fix until the more
proper solution gets landed.

Reported-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ARM: alignment: fix alignment handling for uaccess changes

Jonathan Liu reports that the recent addition of CPU_SW_DOMAIN_PAN
causes wpa_supplicant to die due to the following kernel oops:

Unhandled fault: page domain fault (0x81b) at 0x001017a2
pgd = ee1b8000
[001017a2] *pgd=6ebee831, *pte=6c35475f, *ppte=6c354c7f
Internal error: : 81b [#1] SMP ARM
Modules linked in: rt2800usb rt2x00usb rt2800librt2x00lib crc_ccitt mac80211
CPU: 1 PID: 202 Comm: wpa_supplicant Not tainted 4.3.0-rc2 #1
Hardware name: Allwinner sun7i (A20) Family
task: ec872f80 ti: ee364000 task.ti: ee364000
PC is at do_alignment_ldmstm+0x1d4/0x238
LR is at 0x0
pc : [<c001d1d8>]    lr : [<00000000>]    psr: 600c0113
sp : ee365e18  ip : 00000000  fp : 00000002
r10: 001017a2  r9 : 00000002  r8 : 001017aa
r7 : ee365fb0  r6 : e8820018  r5 : 001017a2  r4 : 00000003
r3 : d49e30e0  r2 : 00000000  r1 : ee365fbc  r0 : 00000000
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none[   34.393106] Control: 10c5387d  Table: 6e1b806a  DAC: 00000051
Process wpa_supplicant (pid: 202, stack limit = 0xee364210)
Stack: (0xee365e18 to 0xee366000)
...
[<c001d1d8>] (do_alignment_ldmstm) from [<c001d510>] (do_alignment+0x1f0/0x904)
[<c001d510>] (do_alignment) from [<c00092a0>] (do_DataAbort+0x38/0xb4)
[<c00092a0>] (do_DataAbort) from [<c0013d7c>] (__dabt_usr+0x3c/0x40)
Exception stack(0xee365fb0 to 0xee365ff8)
5fa0:                                     00000000 56c728c0 001017a2 d49e30e0
5fc0: 775448d2 597d4e74 00200800 7a9e1625 00802001 00000021 b6deec84 00000100
5fe0: 08020200 be9f4f20 0c0b0d0a b6d9b3e0 600c0010 ffffffff
Code: e1a0a005 e1a0000c 1affffe8 e5913000 (e4ea3001)
---[ end trace 0acd3882fcfdf9dd ]---

This is caused by the alignment handler not being fixed up for the
uaccess changes, and userspace issuing an unaligned LDM instruction.
So, fix the problem by adding the necessary fixups.

Reported-by: Jonathan Liu <net147@gmail.com>
Tested-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>