Ingo Molnar [Thu, 10 Oct 2013 06:47:01 +0000 (08:47 +0200)]
tools/perf/build: Fix DPACKAGE definitions for the libbfd et al testcases
Namhyung Kim reported these duplicate DPACKAGE definitions:
test-libbfd:
$(BUILD) -DPACKAGE='perf' -DPACKAGE=perf -lbfd -ldl
Fix all affected places and use Namhyung's suggestion that the
definition should look like a normal C string: -DPACKAGE='"perf"'.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Thu, 10 Oct 2013 06:05:25 +0000 (08:05 +0200)]
tools/perf/build: Pass through DEBUG parameter
Arnaldo reported that 'make DEBUG=1' does not work anymore.
The reason is that 'Makefile' only passes it through to
'Makefile.perf' via the environment, but 'Makefile.perf'
checks that it's a command line option:
ifeq ("$(origin DEBUG)", "command line")
PERF_DEBUG = $(DEBUG)
endif
So pass it through properly, and also clean up DEBUG parameter
handling while at it and fix a couple of annoyances:
- DEBUG=0 used to be interpreted as 'debugging on'. Turn it
into 'debugging off' instead.
- Same was the case for 'DEBUG=' - turn that into debug-off
as well.
- Pass in just a clean, sanitized 'DEBUG' value and get rid of
the intermediate, unnecessary PERF_DEBUG variable.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Wed, 9 Oct 2013 15:00:23 +0000 (17:00 +0200)]
tools/perf/build: Fix non-existent build directory handling
Arnaldo reported that non-existent build directories were not
recognized properly. The reason is readlink failure causing 'O'
to become empty.
Solve it by passing through the 'O' variable unmodified if
readlink fails.
Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131009150023.GA10167@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 14 Oct 2013 10:43:38 +0000 (13:43 +0300)]
perf symbols: Add map_groups__find_ams()
Add a function to find a symbol using an ip that might be on a different
map.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381747424-3557-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 9 Oct 2013 12:01:12 +0000 (15:01 +0300)]
perf symbols: Workaround objdump difficulties with kcore
The objdump tool fails to annotate module symbols when looking at kcore.
Workaround this by extracting object code from kcore and putting it in a
temporary file for objdump to use instead.
The temporary file is created to look like kcore but contains only the
function being disassembled.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381320078-16497-3-git-send-email-adrian.hunter@intel.com
[ Renamed 'index' to 'idx' to avoid shadowing string.h's 'index' in Fedora 12,
Replace local with variable length with malloc/free to fix build in Fedora 12 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 9 Oct 2013 12:01:11 +0000 (15:01 +0300)]
perf symbols: Validate kcore module addresses
Before using kcore we need to check that modules are in memory at the
same addresses that they were when data was recorded.
This is done because, while we could remap symbols to different
addresses, the object code linkages would still be different which would
provide an erroneous view of the object code.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381320078-16497-2-git-send-email-adrian.hunter@intel.com
[ Rename basename to base_name to avoid shadowing libgen's basename in fedora 12 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 10 Oct 2013 20:24:00 +0000 (22:24 +0200)]
perf tools: Separate lbfd check out of NO_DEMANGLE condition
We fail build with NO_DEMANGLE with missing -lbfd externals error.
The reason is that we now use bfd code in srcline object:
perf tools: Implement addr2line directly using libbfd
So we need to check/add -lbfd always now.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Felipe Pena [Thu, 10 Oct 2013 02:00:38 +0000 (23:00 -0300)]
perf tests: Fix memory leak in dso-data.c
Fix for a memory leak on test_file() function in dso-data.c.
Signed-off-by: Felipe Pena <felipensp@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381370438-4209-1-git-send-email-felipensp@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Thu, 10 Oct 2013 03:51:31 +0000 (21:51 -0600)]
perf tools: Fix old GCC build error in 'get_srcline'
trace-event-parse.c:parse_proc_kallsyms()
Old GCC (4.4.2) does not see through the code flow of get_srcline() and
gets confused about the status of 'file' and 'line':
CC /tmp/build/perf/util/srcline.o
cc1: warnings being treated as errors
util/srcline.c: In function ¿get_srcline¿:
util/srcline.c:226: error: ¿file¿ may be used uninitialized in this function
util/srcline.c:227: error: ¿line¿ may be used uninitialized in this function
make[1]: *** [/tmp/build/perf/util/srcline.o] Error 1
make: *** [install] Error 2
make: Leaving directory `/home/acme/git/linux/tools/perf'
[acme@fedora12 linux]$
Help out GCC by initializing 'file' and 'line'.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/n/tip-h8k7h49z3cndqgjdftkmm9f8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Wed, 9 Oct 2013 03:26:53 +0000 (21:26 -0600)]
perf trace: Add summary option to dump syscall statistics
When enabled dumps a summary of all syscalls by task with the usual
statistics -- min, max, average and relative stddev. For example,
make - 26341 : 3344 [ 17.4% ] 0.000 ms
read : 52 0.000 4.802 0.644 30.08
write : 20 0.004 0.036 0.010 21.72
open : 24 0.003 0.046 0.014 23.68
close : 64 0.002 0.055 0.008 22.53
stat : 2714 0.002 0.222 0.004 4.47
fstat : 18 0.001 0.041 0.006 46.26
mmap : 30 0.003 0.009 0.006 5.71
mprotect : 8 0.006 0.039 0.016 32.16
munmap : 12 0.007 0.077 0.020 38.25
brk : 48 0.002 0.014 0.004 10.18
rt_sigaction : 18 0.002 0.002 0.002 2.11
rt_sigprocmask : 60 0.002 0.128 0.010 32.88
access : 2 0.006 0.006 0.006 0.00
pipe : 12 0.004 0.048 0.013 35.98
vfork : 34 0.448 0.980 0.692 3.04
execve : 20 0.000 0.387 0.046 56.66
wait4 : 34 0.017 9923.287 593.221 68.45
fcntl : 8 0.001 0.041 0.013 48.79
getdents : 48 0.002 0.079 0.013 19.62
getcwd : 2 0.005 0.005 0.005 0.00
chdir : 2 0.070 0.070 0.070 0.00
getrlimit : 2 0.045 0.045 0.045 0.00
arch_prctl : 2 0.002 0.002 0.002 0.00
setrlimit : 2 0.002 0.002 0.002 0.00
openat : 94 0.003 0.005 0.003 2.11
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381289214-24885-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Wed, 9 Oct 2013 03:26:52 +0000 (21:26 -0600)]
perf util: Add findnew method to intlist
Similar to other findnew based methods if the requested object is not
found, add it to the list.
v2: followed format of other findnew methods per acme's request
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381289214-24885-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ramkumar Ramachandra [Fri, 4 Oct 2013 05:17:31 +0000 (10:47 +0530)]
perf trace: Improve the error messages
Currently, execution of 'perf trace' reports the following cryptic
message to the user:
$ perf trace
Couldn't read the raw_syscalls tracepoints information!
Typically this happens because the user does not have permissions to
read the debugfs filesystem. Also handle the case when the kernel was
not compiled with debugfs support or when it isn't mounted.
Now, the tool prints detailed error messages:
$ perf trace
Error: Unable to find debugfs
Hint: Was your kernel was compiled with debugfs support?
Hint: Is the debugfs filesystem mounted?
Hint: Try 'sudo mount -t debugfs nodev /sys/kernel/debug'
$ perf trace
Error: No permissions to read /sys/kernel/debug//tracing/events/raw_syscalls
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/'
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1380863851-14460-1-git-send-email-artagnon@gmail.com
[ Added ready to use commands to fix the issues as extra hints, use the
current debugfs mount point when reporting permission error, use
strerror_r instead of the deprecated sys_errlist, as reported by David Ahern ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ramkumar Ramachandra [Thu, 3 Oct 2013 09:15:16 +0000 (14:45 +0530)]
perf timechart: Add example in the documentation
While at it, update the synopsis to show both forms.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/1380791716-10325-1-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Wed, 9 Oct 2013 09:49:29 +0000 (11:49 +0200)]
perf tools: Implement summary output for 'make install'
'make install' used to show all the install lines, which is way too
verbose to be really informative to the user.
Implement summary output instead:
comet:~/tip/tools/perf> make install
BUILD: Doing 'make -j12' parallel build
SUBDIR Documentation
INSTALL Documentation-man
INSTALL binaries
INSTALL libexec
INSTALL perf-archive
INSTALL perl-scripts
INSTALL python-scripts
INSTALL bash_completion-script
INSTALL tests
'make install V=1' will still show the old, detailed output.
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1381312169-17354-5-git-send-email-mingo@kernel.org
[ Fixed conflict with libperf-gtk patches in acme/perf/core, cope with 'trace' alias ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Wed, 9 Oct 2013 09:49:28 +0000 (11:49 +0200)]
perf tools: Align perf version output to other build messages
Before:
CC util/pmu.o
CC util/parse-events.o
PERF_VERSION = 3.12.rc4.g1b30c
CC util/parse-events-flex.o
GEN perf-archive
After:
CC util/pmu.o
CC util/parse-events.o
PERF_VERSION = 3.12.rc4.g1b30c
CC util/parse-events-flex.o
GEN perf-archive
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381312169-17354-4-git-send-email-mingo@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Wed, 9 Oct 2013 09:49:27 +0000 (11:49 +0200)]
tools: Harmonize the various build messages in perf, lib-traceevent, lib-lk
The various build lines from libtraceevent and perf mix up during a
parallel build and produce unaligned output like:
CC builtin-buildid-list.o
CC builtin-buildid-cache.o
CC builtin-list.o
CC FPIC trace-seq.o
CC builtin-record.o
CC FPIC parse-filter.o
CC builtin-report.o
CC builtin-stat.o
CC FPIC parse-utils.o
CC FPIC kbuffer-parse.o
CC builtin-timechart.o
CC builtin-top.o
CC builtin-script.o
BUILD STATIC LIB libtraceevent.a
CC builtin-probe.o
CC builtin-kmem.o
CC builtin-lock.o
To solve this, harmonize all the build message alignments to be similar
to the kernel's kbuild output: prefixed by two spaces and 11-char wide.
After the patch the output looks pretty tidy, even if output lines get
mixed up:
CC builtin-annotate.o
FLAGS: * new build flags or cross compiler
CC builtin-bench.o
AR liblk.a
CC bench/sched-messaging.o
CC FPIC event-parse.o
CC bench/sched-pipe.o
CC FPIC trace-seq.o
CC bench/mem-memcpy.o
CC bench/mem-memset.o
CC FPIC parse-filter.o
CC builtin-diff.o
CC builtin-evlist.o
CC builtin-help.o
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381312169-17354-3-git-send-email-mingo@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Wed, 9 Oct 2013 09:49:26 +0000 (11:49 +0200)]
perf tools: Implement summary output for 'make clean'
'make clean' used to show all the rm lines, which isn't really
informative in any way and spams the console.
Implement summary output:
comet:~/tip/tools/perf> make clean
CLEAN libtraceevent
CLEAN liblk
CLEAN config
CLEAN core-objs
CLEAN core-progs
CLEAN core-gen
CLEAN Documentation
CLEAN python
'make clean V=1' will still show the old, detailed output.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381312169-17354-2-git-send-email-mingo@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Thu, 10 Oct 2013 05:42:56 +0000 (07:42 +0200)]
perf tools: Fix redirection printouts
Fix the duplicate util/util printout Arnaldo reported:
$ make V=1 O=/tmp/build/perf -C tools/perf/ util/srcline.o
...
# Redirected target util/srcline.o => /tmp/build/perf/util/util/srcline.o
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20131010054256.GA23716@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 8 Oct 2013 20:43:20 +0000 (17:43 -0300)]
perf trace: Initial beautifier for ioctl's 'cmd' arg
[root@zoo linux]# trace -e ioctl | grep -v "cmd: 0x" | head -10
0.386 ( 0.001 ms): trace/1602 ioctl(fd: 1<pipe:[127057]>, cmd: TCGETS, arg: 0x7fff59fcb4d0 ) = -1 ENOTTY Inappropriate ioctl for device
1459.368 ( 0.002 ms): inotify_reader/10352 ioctl(fd: 18<anon_inode:inotify>, cmd: FIONREAD, arg: 0x7fb835228bcc ) = 0
1463.586 ( 0.002 ms): inotify_reader/10352 ioctl(fd: 18<anon_inode:inotify>, cmd: FIONREAD, arg: 0x7fb835228bcc ) = 0
1463.611 ( 0.002 ms): inotify_reader/10352 ioctl(fd: 18<anon_inode:inotify>, cmd: FIONREAD, arg: 0x7fb835228bcc ) = 0
3740.526 ( 0.002 ms): awk/1612 ioctl(fd: 1<pipe:[128265]>, cmd: TCGETS, arg: 0x7fff4d166b90 ) = -1 ENOTTY Inappropriate ioctl for device
3740.704 ( 0.001 ms): awk/1612 ioctl(fd: 3</proc/meminfo>, cmd: TCGETS, arg: 0x7fff4d1669a0 ) = -1 ENOTTY Inappropriate ioctl for device
3742.550 ( 0.002 ms): ps/1614 ioctl(fd: 1<pipe:[128266]>, cmd: TIOCGWINSZ, arg: 0x7fff591762b0 ) = -1 ENOTTY Inappropriate ioctl for device
3742.555 ( 0.003 ms): ps/1614 ioctl(fd: 2<socket:[19550]>, cmd: TIOCGWINSZ, arg: 0x7fff591762b0 ) = -1 ENOTTY Inappropriate ioctl for device
3742.558 ( 0.002 ms): ps/1614 ioctl(cmd: TIOCGWINSZ, arg: 0x7fff591762b0 ) = -1 ENOTTY Inappropriate ioctl for device
3742.572 ( 0.002 ms): ps/1614 ioctl(fd: 1<pipe:[128266]>, cmd: TCGETS, arg: 0x7fff59176220 ) = -1 ENOTTY Inappropriate ioctl for device
[root@zoo linux]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-afajwap3mr60dfl4qpdl1pxn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 8 Oct 2013 20:17:43 +0000 (17:17 -0300)]
perf trace: Prepare the strarray scnprintf method for reuse
Right now when an index passed to that method has no string associated
it'll print the index as a decimal number, prepare it so that we can use
it to print it in hex as well, for ioctls, for instance.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nsvy06sqj64qvnkmzvwxsx2v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 8 Oct 2013 19:00:21 +0000 (16:00 -0300)]
perf trace: Allow specifying index offset in strarrays
So that the index passed doesn't have to start at zero, being
decremented from an offset specified when declaring the strarray before
being used as the real array index.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-k1ce6uqyt4qar9edrj3mevod@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 8 Oct 2013 08:45:48 +0000 (11:45 +0300)]
perf symbols: Make a separate function to parse /proc/modules
Make a separate function to parse /proc/modules so that it can be
reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381221956-16699-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Sat, 28 Sep 2013 19:13:02 +0000 (13:13 -0600)]
perf intlist: Add priv member
Allows commands to leverage intlist infrastructure for opaque
structures.
For example an upcoming perf-trace change will use this as a means of
tracking syscalls statistics by task.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380395584-9025-6-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Sat, 28 Sep 2013 19:12:59 +0000 (13:12 -0600)]
perf trace: Use new machine method to loop over threads
Use the new machine method that loops over threads to dump summary data.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380395584-9025-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Sat, 28 Sep 2013 19:12:58 +0000 (13:12 -0600)]
perf machine: Add method to loop over threads and invoke handler
Loop over all threads within a machine - including threads moved to the
dead threads list -- and invoked a function.
This allows commands to run some specific function on each thread (eg.,
dump statistics) yet hides how the threads are maintained within the
machine.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380395584-9025-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Sat, 28 Sep 2013 19:13:01 +0000 (13:13 -0600)]
perf trace: Add record option
The record option is a convience alias to include the -e raw_syscalls:*
argument to perf-record. All other options are passed to perf-record's
handler. Resulting data file can be analyzed by perf-trace -i.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380395584-9025-5-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Sat, 28 Sep 2013 19:13:00 +0000 (13:13 -0600)]
perf trace: Fix comm resolution when reading events from file
Task comm's are getting lost when processing events from a file. The
problem is that the trace struct used by the live processing has its
host machine and the perf-session used for file based processing has its
host machine. Fix by having both references point to the same machine.
Before:
0.030 ( 0.001 ms): :27743/27743 brk( ...
0.057 ( 0.004 ms): :27743/27743 mmap(len: 4096, prot: READ|WRITE, flags: ...
0.075 ( 0.006 ms): :27743/27743 access(filename: 0x7f3809fbce00, mode: R ...
0.091 ( 0.005 ms): :27743/27743 open(filename: 0x7f3809fba14c, flags: CLOEXEC ...
...
After:
0.030 ( 0.001 ms): make/27743 brk( ...
0.057 ( 0.004 ms): make/27743 mmap(len: 4096, prot: READ|WRITE, flags: ...
0.075 ( 0.006 ms): make/27743 access(filename: 0x7f3809fbce00, mode: R ...
0.091 ( 0.005 ms): make/27743 open(filename: 0x7f3809fba14c, flags: CLOEXEC ...
...
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380395584-9025-4-git-send-email-dsahern@gmail.com
[ Moved creation of new host machine to a separate constructor: machine__new_host() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Sat, 28 Sep 2013 20:28:00 +0000 (14:28 -0600)]
perf stat: Add units to nanosec-based counters
Ingo pointed out that the task-clock counter should have the units
explicitly stated since it is not a counter.
Before:
perf stat -a -- sleep 1
Performance counter stats for 'sleep 1':
16186.874834 task-clock # 16.154 CPUs utilized
...
After:
perf stat -a -- sleep 1
Performance counter stats for 'system wide':
16146.402138 task-clock (msec) # 16.125 CPUs utilized
...
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380400080-9211-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Mon, 30 Sep 2013 13:37:37 +0000 (07:37 -0600)]
perf stat: Don't require a workload when using system wide or CPU options
The "perf stat" command can do system wide counters or one or more cpus.
For these options do not require a workload to be specified.
v2: use perf_target__none per Namhyung's comment.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/52497F3C.9070908@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Sat, 28 Sep 2013 20:27:58 +0000 (14:27 -0600)]
perf stat: Fix misleading message when specifying cpu list or system wide
The "perf stat" tool displays the command run in its summary output
which is misleading when using a cpu list or system wide collection.
Before:
perf stat -a -- sleep 1
Performance counter stats for 'sleep 1':
16152.670249 task-clock # 16.132 CPUs utilized
417 context-switches # 0.002 M/sec
7 cpu-migrations # 0.030 K/sec
...
After:
perf stat -a -- sleep 1
Performance counter stats for 'system wide':
16206.931120 task-clock # 16.144 CPUs utilized
395 context-switches # 0.002 M/sec
5 cpu-migrations # 0.030 K/sec
...
or
perf stat -C1 -- sleep 1
Performance counter stats for 'CPU(s) 1':
1001.669257 task-clock # 1.000 CPUs utilized
4,264 context-switches # 0.004 M/sec
3 cpu-migrations # 0.003 K/sec
...
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380400080-9211-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 2 Oct 2013 13:46:39 +0000 (15:46 +0200)]
perf evlist: Fix perf_evlist__mmap_read event overflow
The perf_evlist__mmap_read used 'union perf_event' as a placeholder for
event crossing the mmap boundary.
This is ok for sample shorter than ~PATH_MAX. However we could grow up
to the maximum sample size which is 16 bits max.
I hit this overflow issue when using 'perf top -G dwarf' which produces
sample with the size around 8192 bytes. We could configure any valid
sample size here using: '-G dwarf,size'.
Using array with sample max size instead for the event placeholder. Also
adding another safe check for the dynamic size of the user stack.
TODO: The 'struct perf_mmap' is quite big now, maybe we could use some
lazy allocation for event_copy size.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1380721599-24285-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Petr Holasek [Thu, 3 Oct 2013 17:28:45 +0000 (19:28 +0200)]
perf bench: Fix failing assertions in numa bench
Patch adds more subtle handling of -C and -N parameters in
parse_{cpu,node}_setup_list() functions when there isn't enough NUMA
nodes or CPUs present. Instead of assertion and terminating benchmark,
partial test is skipped with error message and perf will continue to the
next one.
Fixed problem can be easily reproduced on machine with only one NUMA
node:
# Running numa/mem benchmark...
# Running main, "perf bench numa mem -a"
...
# Running RAM-bw-remote, "perf bench numa mem -p 1 -t 1 -P 1024 -C 0 -M 1 -s
perf: bench/numa.c:622: parse_setup_node_list: Assertion `!(bind_node_0 < 0 ||
bind_node_0 >= g->p.nr_nodes)' failed.
Aborted
Signed-off-by: Petr Holasek <pholasek@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Petr Benas <pbenas@redhat.com>
Link: http://lkml.kernel.org/r/1380821325-4017-1-git-send-email-pholasek@redhat.com
Signed-off-by: Petr Benas <pbenas@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ramkumar Ramachandra [Thu, 3 Oct 2013 08:40:36 +0000 (14:10 +0530)]
perf tools: Ignore 'perf timechart' output file
The default output file produced by the 'perf timechart' tool is called
output.svg, add it to .gitignore.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1380789636-4512-1-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ramkumar Ramachandra [Tue, 1 Oct 2013 08:36:44 +0000 (14:06 +0530)]
perf stat: Don't print bogus data on -e instructions
When only the instructions event is requested:
$ perf stat -e instructions git s
M builtin-stat.c
Performance counter stats for 'git s':
917,453,420 instructions # 0.00 insns per cycle
0.
213002926 seconds time elapsed
The 0.00 insns per cycle comment in the output is totally bogus and
misleading. It happens because update_shadow_stats() doesn't touch
runtime_cycles_stats when only the instructions event is requested. So,
omit printing the bogus data altogether.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1380616604-4077-1-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ramkumar Ramachandra [Mon, 30 Sep 2013 11:13:05 +0000 (16:43 +0530)]
perf stat: Don't print bogus data on -e cycles
When only the cycles event is requested:
$ perf stat -e cycles dd if=/dev/zero of=/dev/null count=
1000000
1000000+0 records in
1000000+0 records out
512000000 bytes (512 MB) copied, 0.26123 s, 2.0 GB/s
Performance counter stats for 'dd if=/dev/zero of=/dev/null count=
1000000':
911,626,453 cycles # 0.000 GHz
0.
262113350 seconds time elapsed
The 0.000 GHz comment in the output is totally bogus and misleading. It
happens because update_shadow_stats() doesn't touch runtime_nsecs_stats;
it is only written when a requested counter matches a SW_TASK_CLOCK. In
our case, since we have only requested HW_CPU_CYCLES,
runtime_nsecs_stats is unavailable. So, omit printing the comment
altogether.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1380539585-23859-3-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 27 Sep 2013 16:29:58 +0000 (18:29 +0200)]
perf tools: Move start conditions to start of the flex file
Moving start conditions to start of the flex file so it's clear what the
INITIAL condition rules are.
Plus adding default rule for INITIAL condition. This prevents default
space to be printed for events like:
$ ./perf stat -e "cycles " kill 2>/dev/null
$
^^^^^^^^
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1380299398-10839-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 26 Sep 2013 18:55:54 +0000 (20:55 +0200)]
perf tools: Add missing -ldl for gtk build
If we build perf with NO_LIBPYTHON=1 NO_LIBPERL=1 the '-ldl' is not
added to libs build fails if we have gtk2 code in, because it depends on
it.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1380221754-29865-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Sun, 22 Sep 2013 10:22:09 +0000 (13:22 +0300)]
perf machine: Use snprintf instead of sprintf
To avoid buffer overruns.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1379845338-29637-2-git-send-email-adrian.hunter@intel.com
[ Split from
aa7fe3b ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Mon, 23 Sep 2013 08:17:35 +0000 (10:17 +0200)]
perf bench sched: Add --threaded option
Allow the measurement of thread versus process context switch
performance.
The default stays at 'process' based measurement, like lmbench's lat_ctx
benchmark.
Sample output:
comet:~/tip/tools/perf> taskset 1 ./perf bench sched pipe
# Running sched/pipe benchmark...
# Executed
1000000 pipe operations between two processes
Total time: 4.138 [sec]
4.138729 usecs/op
241620 ops/sec
comet:~/tip/tools/perf> taskset 1 ./perf bench sched pipe --threaded
# Running sched/pipe benchmark...
# Executed
1000000 pipe operations between two threads
Total time: 3.667 [sec]
3.667667 usecs/op
272652 ops/sec
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Link: http://lkml.kernel.org/r/20130917114256.GA31159@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 24 Sep 2013 14:56:36 +0000 (11:56 -0300)]
perf trace: Add 'trace' alias to 'perf trace'
Make 'perf trace' more accessible by aliasing it to just 'trace':
[root@zoo linux]# trace --duration 15 -a -e futex sleep 1
110.092 (16.188 ms): libvirtd/1166 futex(uaddr: 0x185b344, op: WAIT|PRIV, val: 174293 ) = 0
110.101 (15.903 ms): libvirtd/1171 futex(uaddr: 0x185b3dc, op: WAIT|PRIV, val: 139265 ) = 0
111.594 (15.776 ms): libvirtd/1165 futex(uaddr: 0x185b344, op: WAIT|PRIV, val: 174295 ) = 0
111.610 (15.969 ms): libvirtd/1169 futex(uaddr: 0x185b3dc, op: WAIT|PRIV, val: 139267 ) = 0
113.556 (16.216 ms): libvirtd/1168 futex(uaddr: 0x185b3dc, op: WAIT|PRIV, val: 139269 ) = 0
291.265 (199.508 ms): chromium-brows/15830 futex(uaddr: 0x7fff2986bcb4, op: WAIT_BITSET|PRIV|CLKRT, val: 1, utime: 0x7fff2986bab0, val3:
4294967295) = -1 ETIMEDOUT Connection timed out
360.354 (69.053 ms): chromium-brows/15830 futex(uaddr: 0x7fff2986bcb4, op: WAIT_BITSET|PRIV|CLKRT, val: 1, utime: 0x7fff2986bab0, val3:
4294967295) = -1 ETIMEDOUT Connection timed out
[root@zoo linux]#
I.e. looking for futex calls that take at least 15ms, system wide, during a one
second window. Now to get callchains into 'trace' to figure out what are those
locks :-)
Requested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ch4smqz8b5fmgrte7c5e4fuw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 24 Sep 2013 14:04:32 +0000 (11:04 -0300)]
perf trace: Show path associated with fd in live sessions
For live sessions we can just access /proc to map an fd to its path, on
a best effort way, i.e. sometimes the fd will have gone away when we try
to do the mapping, as it is done in a lazy way, only when a reference to
such fd is made then the path will be looked up in /proc.
This is disabled when processing perf.data files, where we will have to
have a way to get getname events, be it via an on-the-fly 'perf probe'
event or after a vfs_getname tracepoint is added to the kernel.
A first step will be to synthesize such event for the use cases where
the threads in the monitored workload exist already.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1r1ti33ye1666jezu2d8q1c3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 24 Sep 2013 03:09:38 +0000 (00:09 -0300)]
perf trace: Beautify mlock & friends 'addr' arg
Printing it as an hex number.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gd68zmnwbbofsv5m6w18intw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Mon, 23 Sep 2013 01:44:56 +0000 (19:44 -0600)]
perf trace: Handle MSG_WAITFORONE not defined
Needed for compiles on Fedora 12 for example.
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1379900700-5186-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Mon, 23 Sep 2013 01:45:00 +0000 (19:45 -0600)]
perf trace: Add beautifier for clock_gettime's clk_id argument
Before:
0.030 ( 0.002 ms): 2571 clock_gettime(which_clock: 1, tp: 0x7f3b45729cd0 ) = 0
After:
0.030 ( 0.002 ms): 2571 clock_gettime(which_clock: MONOTONIC, tp: 0x7f3b45729cd0 ) = 0
v2: Update to use the STRARRAY option
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1379900700-5186-6-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 23 Sep 2013 15:52:04 +0000 (12:52 -0300)]
perf trace: Beautify pipe2 'flags' arg
4.234 (0.005 ms): fetchmail/3224 pipe2(fildes: 0x7fffc72bcee0, flags: CLOEXEC) = 0
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9e1jz78i6q6e0xr9fsitqbpe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 20 Sep 2013 15:24:20 +0000 (12:24 -0300)]
perf trace: Use socket's beautifiers in socketpair
For the address family and socket type.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3a6cwwskobvan823pau76cm4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 20 Sep 2013 15:19:41 +0000 (12:19 -0300)]
perf trace: Don't supress zeroed args when there is an strarray entry for it
Case in hand:
9.682 ( 0.001 ms): Xorg/13079 setitimer(which: REAL, value: 0x7fffede42470) = 0
ITIMER_REAL is zero.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6hnoqsjh99t4hxi3xu2nlwep@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 20 Sep 2013 15:13:37 +0000 (12:13 -0300)]
perf trace: Add helper for syscalls with a single strarray arg
In such cases just stating the (arg, name, array) is enough, reducing
the size of the syscall formatters table.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3k53p6dv2sh4ydsc5k5otoia@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 20 Sep 2013 14:49:50 +0000 (11:49 -0300)]
perf trace: Beautify flock 'cmd' arg
4735.638 ( 0.003 ms): man/19881 flock(fd: 3, cmd: SH|NB) = 0
4735.832 ( 0.002 ms): man/19881 flock(fd: 3, cmd: UN ) = 0
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-amh3y88kh1nmclpwezqlarl8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 20 Sep 2013 14:27:32 +0000 (11:27 -0300)]
perf trace: Beautify epoll_ctl 'op' arg
[root@sandy ~]# perf trace -e epoll_ctl
2.490 (0.003 ms): systemd-logind/586 epoll_ctl(epfd: 10, op: ADD, fd: 24, event: 0x7fff22314ef0) = 0
2.621 (0.003 ms): systemd-logind/586 epoll_ctl(epfd: 10, op: DEL, fd: 24 ) = 0
2.833 (0.010 ms): systemd-logind/586 epoll_ctl(epfd: 10, op: ADD, fd: 24, event: 0x7fff22314cd0) = 0
2.953 (0.002 ms): systemd-logind/586 epoll_ctl(epfd: 10, op: DEL, fd: 24 ) = 0
3.118 (0.002 ms): systemd-logind/586 epoll_ctl(epfd: 10, op: ADD, fd: 24, event: 0x7fff22314d20) = 0
4.762 (0.002 ms): systemd-logind/586 epoll_ctl(epfd: 10, op: DEL, fd: 24 ) = 0
^C[root@sandy ~]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-88xz9phc8cbicnxonud6if8h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 11 Sep 2013 05:09:33 +0000 (14:09 +0900)]
perf tools: Fix srcline sort key behavior
Currently the srcline sort key compares ip rather than srcline info. I
guess this was due to a performance reason to run external addr2line
utility. Now we have implemented the functionality inside, use the
srcline info when comparing hist entries.
Also constantly print "??:0" string for unknown srcline rather than
printing ip.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378876173-13363-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Roberto Vitillo [Wed, 11 Sep 2013 05:09:32 +0000 (14:09 +0900)]
perf tools: Implement addr2line directly using libbfd
When the srcline sort key is used , the external addr2line utility needs
to be run for each hist entry to get the srcline info. This can consume
quite a time if one has a huge perf.data file.
So rather than executing the external utility, implement it internally
and just call it. We can do it since we've linked with libbfd already.
Signed-off-by: Roberto Agostino Vitillo <ravitillo@lbl.gov>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378876173-13363-9-git-send-email-namhyung@kernel.org
[ Use a2l_data struct instead of static globals ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 11 Sep 2013 05:09:31 +0000 (14:09 +0900)]
perf tools: Save failed result of get_srcline()
Some dso's lack srcline info, so there's no point to keep trying on
them. Just save failture status and skip them.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378876173-13363-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 11 Sep 2013 05:09:30 +0000 (14:09 +0900)]
perf annotate: Pass dso instead of dso_name to get_srcline()
This is a preparation of next change. No functional changes are
intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378876173-13363-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 11 Sep 2013 05:09:29 +0000 (14:09 +0900)]
perf tools: Do not try to call addr2line on non-binary files
No need to call addr2line since they don't have such information.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378876173-13363-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 11 Sep 2013 05:09:28 +0000 (14:09 +0900)]
perf annotate: Factor out get/free_srcline()
Currently external addr2line tool is used for srcline sort key and
annotate with srcline info. Separate the common code to prepare
upcoming enhancements.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378876173-13363-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 11 Sep 2013 05:09:27 +0000 (14:09 +0900)]
perf hists: Free srcline when freeing hist_entry
We've been leaked srcline of hist_entry, it should be freed also.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378876173-13363-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 11 Sep 2013 05:09:26 +0000 (14:09 +0900)]
perf annotate: Reuse path from the result of addr2line
In the symbol__get_source_line(), path and src_line->path will have same
value, but they were allocated separately, and leaks one. Just share
path to src_line->path.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378876173-13363-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 11 Sep 2013 05:09:25 +0000 (14:09 +0900)]
perf sort: Fix a memory leak on srcline
In the hist_entry__srcline_snprintf(), path and self->srcline are
pointing the same memory region, but they are doubly allocated.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378876173-13363-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 13 Sep 2013 06:27:43 +0000 (15:27 +0900)]
perf tools: Separate out GTK codes to libperf-gtk.so
Separate out GTK codes to a shared object called libperf-gtk.so. This
time only GTK codes are built with -fPIC and libperf remains as is. Now
run GTK hist and annotation browser using libdl.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1379053663-13706-1-git-send-email-namhyung@kernel.org
[ Fix it up wrt Ingo's tools/perf build speedups ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Willy Tarreau [Sat, 14 Sep 2013 08:32:59 +0000 (10:32 +0200)]
perf symbols: Add new option --ignore-vmlinux for perf top
Running "perf top" on a machine with possibly invalid or non-matching
vmlinux at the various places results in no symbol resolving despite
/proc/kallsyms being present and valid.
Add a new option --ignore-vmlinux to explicitly indicate that we do not
want to use these kernels and just use what we have (kallsyms).
Signed-off-by: Willy Tarreau <w@1wt.eu>
Cc: Ingo Molnar <mingo@redhat.com>
Link: http://lkml.kernel.org/r/20130914083259.GA3418@1wt.eu
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 1 Sep 2013 10:36:15 +0000 (12:36 +0200)]
perf tools: Adding throttle event data struct support
Moving 'struct throttle_event' out of python code and making it global
as any other event.
There's no usage of throttling events in any perf commands so far
(besides python support), but we'll need this event data backup for
upcoming test.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378031796-17892-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 1 Sep 2013 10:36:14 +0000 (12:36 +0200)]
perf evlist: Introduce perf_evlist__new_default function
Adding new common function to create evlist with default event. It
spares some code lines in automated tests.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378031796-17892-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 1 Sep 2013 10:36:13 +0000 (12:36 +0200)]
perf tools: Add possibility to specify mmap size
Adding possibility to specify mmap size via -m/--mmap-pages
by appending unit size character (B/K/M/G) to the
number, like:
$ perf record -m 8K ls
$ perf record -m 2M ls
The size is rounded up appropriately to follow perf
mmap restrictions.
If no unit is specified the number provides pages as
of now, like:
$ perf record -m 8 ls
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378031796-17892-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 1 Sep 2013 10:36:12 +0000 (12:36 +0200)]
perf tools: Check mmap pages value early
Move the check of the mmap_pages value to the options parsing time, so
we could rely on this value on other parts of code.
Related changes come in the next patches.
Also changes perf_evlist::mmap_len to proper size_t type.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378031796-17892-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Davidlohr Bueso [Mon, 9 Sep 2013 02:19:19 +0000 (19:19 -0700)]
perf lock: Account for lock average wait time
While perf-lock currently reports both the total wait time and the
number of contentions, it doesn't explicitly show the average wait time.
Having this value immediately in the report can be quite useful when
looking into performance issues.
Furthermore, allowing report to sort by averages is another handy
feature to have - and thus do not only print the value, but add it to
the lock_stat structure.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1378693159-8747-8-git-send-email-davidlohr@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Davidlohr Bueso [Mon, 9 Sep 2013 02:19:18 +0000 (19:19 -0700)]
perf lock: Limit bad rate precision
Two decimal precision should be enough for this.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1378693159-8747-7-git-send-email-davidlohr@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Davidlohr Bueso [Mon, 9 Sep 2013 02:19:16 +0000 (19:19 -0700)]
perf lock: Redo __cmd_report
This function should be straightforward, and we can remove some trivial
logic by moving the functionality of read_events() into __cmd_report() -
thus allowing a new session to be properly deleted.
Since the 'info' subcommand also needs to process the recorded events,
add a 'display_info' flag to differentiate between report and info
commands.
Furthermore, this patch also calls perf_session__has_traces(), making
sure that we don't compare apples and oranges, fixing a segfault when
using an perf.data file generated by a different subcommand. ie:
./perf mem record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (~724 samples) ]
./perf lock report
Segmentation fault (core dumped)
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1378693159-8747-5-git-send-email-davidlohr@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Davidlohr Bueso [Mon, 9 Sep 2013 02:19:15 +0000 (19:19 -0700)]
perf lock: Plug some memleaks
Address some trivial leaks.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1378693159-8747-4-git-send-email-davidlohr@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Davidlohr Bueso [Mon, 9 Sep 2013 02:19:14 +0000 (19:19 -0700)]
perf lock: Return proper code in report_lock_*_event
The report_lock_*_event() functions return -1 when lock_stat_findnew(),
thread_stat_findnew() or get_seq() return NULL. These functions only
return this value when failing to allocate memory, this return -ENOMEM
instead.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1378693159-8747-3-git-send-email-davidlohr@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Davidlohr Bueso [Mon, 9 Sep 2013 02:19:13 +0000 (19:19 -0700)]
perf lock: Remove dead code
No need for break statements after goto jumps.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1378693159-8747-2-git-send-email-davidlohr@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 12 Sep 2013 16:39:35 +0000 (18:39 +0200)]
perf tools: Unify page_size usage
Making page_size global from the util object.
Removing the not needed one.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1379003976-5839-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 12 Sep 2013 16:39:34 +0000 (18:39 +0200)]
perf tools: Remove unused trace-event-* code
Removing unused trace-event-* code.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1379003976-5839-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ricardo Ribalda Delgado [Wed, 18 Sep 2013 13:56:14 +0000 (15:56 +0200)]
perf symbols: Support for Openembedded/Yocto -dbg packages
On OpenEmbedded the symbol files are located under a .debug folder on
the same folder as the binary file.
This patch adds support for such files.
Without this patch on perf top you can see:
no symbols found in /usr/lib/gstreamer-1.0/libtheoraenc.so.1.1.2, maybe
install a debug package?
84.56% libtheoraenc.so.1.1.2 [.] 0x000000000000b346
With this patch symbols are shown:
19.06% libtheoraenc.so.1.1.2 [.] oc_int_frag_satd_thresh_mmxext
9.76% libtheoraenc.so.1.1.2 [.] oc_analyze_mb_mode_luma
5.58% libtheoraenc.so.1.1.2 [.] oc_qii_state_advance
4.84% libtheoraenc.so.1.1.2 [.] oc_enc_tokenize_ac
...
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/r/1379512574-25912-1-git-send-email-ricardo.ribalda@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ramkumar Ramachandra [Thu, 4 Jul 2013 12:41:31 +0000 (18:11 +0530)]
perf completion: Use more comp words
The completion words $words and $cword are available, so we might as
well use them instead of directly accessing COMP_WORDS.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1372941691-14684-8-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ramkumar Ramachandra [Thu, 4 Jul 2013 12:41:30 +0000 (18:11 +0530)]
perf completion: Strip dependency on bash-completion
The bash-completion package defines the _get_comp_words_by_ref function.
There is no need to depend on it, as we can reimplement it like git.git
has.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Link: http://lkml.kernel.org/r/1372941691-14684-7-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ramkumar Ramachandra [Thu, 4 Jul 2013 12:41:29 +0000 (18:11 +0530)]
perf completion: Strip function_exists ()
Use "type" to check existence consistently.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1372941691-14684-6-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ramkumar Ramachandra [Thu, 4 Jul 2013 12:41:27 +0000 (18:11 +0530)]
perf completion: Strip dependency on _filedir
_filedir is defined in the bash-completion package, but there is no need
to depend on it. Instead, call complete with multiple -o arguments
before the -F argument like in git.git's completion script.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1372941691-14684-4-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ramkumar Ramachandra [Thu, 4 Jul 2013 12:41:26 +0000 (18:11 +0530)]
perf completion: Update __ltrim_colon_completions
The function is taken from the bash-completion package; update it to use
the latest version where colon_word doesn't miss quoting.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1372941691-14684-3-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ramkumar Ramachandra [Thu, 4 Jul 2013 12:41:25 +0000 (18:11 +0530)]
perf completion: Don't dictate perf install location
The statement
have perf
limits the locations in which to look for the perf program. Moreover,
it depends on the bash-completion package to be installed. Replace it
with a call to `type perf`.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1372941691-14684-2-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 12 Sep 2013 15:35:21 +0000 (12:35 -0300)]
perf trace: Add option to show process COMM
Enabled by default, disable with --no-comm, e.g.:
181.821 (0.001 ms): deja-dup-monit/10784 recvmsg(fd: 8, msg: 0x7fff4342baf0, flags: PEEK|TRUNC|CMSG_CLOEXEC ) = 20
181.824 (0.001 ms): deja-dup-monit/10784 geteuid( ) = 1000
181.825 (0.001 ms): deja-dup-monit/10784 getegid( ) = 1000
181.834 (0.002 ms): deja-dup-monit/10784 recvmsg(fd: 8, msg: 0x7fff4342baf0, flags: CMSG_CLOEXEC ) = 20
181.836 (0.001 ms): deja-dup-monit/10784 geteuid( ) = 1000
181.838 (0.001 ms): deja-dup-monit/10784 getegid( ) = 1000
181.705 (0.003 ms): evolution-addr/10924 recvmsg(fd: 10, msg: 0x7fff17dc6990, flags: PEEK|TRUNC|CMSG_CLOEXEC) = 1256
181.710 (0.002 ms): evolution-addr/10924 geteuid( ) = 1000
181.712 (0.001 ms): evolution-addr/10924 getegid( ) = 1000
181.727 (0.003 ms): evolution-addr/10924 recvmsg(fd: 10, msg: 0x7fff17dc6990, flags: CMSG_CLOEXEC ) = 1256
181.731 (0.001 ms): evolution-addr/10924 geteuid( ) = 1000
181.734 (0.001 ms): evolution-addr/10924 getegid( ) = 1000
181.908 (0.002 ms): evolution-addr/10924 recvmsg(fd: 10, msg: 0x7fff17dc6990, flags: PEEK|TRUNC|CMSG_CLOEXEC) = 20
181.913 (0.001 ms): evolution-addr/10924 geteuid( ) = 1000
181.915 (0.001 ms): evolution-addr/10924 getegid( ) = 1000
181.930 (0.003 ms): evolution-addr/10924 recvmsg(fd: 10, msg: 0x7fff17dc6990, flags: CMSG_CLOEXEC ) = 20
181.934 (0.001 ms): evolution-addr/10924 geteuid( ) = 1000
181.937 (0.001 ms): evolution-addr/10924 getegid( ) = 1000
220.718 (0.010 ms): at-spi2-regist/10715 sendmsg(fd: 3, msg: 0x7fffdb8756c0, flags: NOSIGNAL ) = 200
220.741 (0.000 ms): dbus-daemon/10711 ... [continued]: epoll_wait()) = 1
220.759 (0.004 ms): dbus-daemon/10711 recvmsg(fd: 11, msg: 0x7ffff94594d0, flags: CMSG_CLOEXEC ) = 200
220.780 (0.002 ms): dbus-daemon/10711 recvmsg(fd: 11, msg: 0x7ffff94594d0, flags: CMSG_CLOEXEC ) = 200
220.788 (0.001 ms): dbus-daemon/10711 recvmsg(fd: 11, msg: 0x7ffff94594d0, flags: CMSG_CLOEXEC ) = -1 EAGAIN Resource temporarily unavailable
220.760 (0.004 ms): at-spi2-regist/10715 sendmsg(fd: 3, msg: 0x7fffdb8756c0, flags: NOSIGNAL ) = 200
220.771 (0.023 ms): perf/26347 open(filename: 0xf2e780, mode:
15918976 ) = 19
220.850 (0.002 ms): perf/26347 close(fd: 19 ) = 0
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6be5jvnkdzjptdrebfn5263n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 12 Sep 2013 15:18:56 +0000 (12:18 -0300)]
perf trace: Beautify eventfd2 'flags' arg
61.168 ( 0.004 ms): 24267 eventfd2(flags: CLOEXEC|NONBLOCK) = 9
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3hg8eajdzil077501c8f5jkw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 12 Sep 2013 14:54:48 +0000 (11:54 -0300)]
perf trace: Beautify send/recv syscall 'flags' arg
[root@sandy ~]# perf trace -a -e recvmmsg,recvmsg,recvfrom,sendto,sendmsg,sendmmsg
6.901 (0.002 ms): 589 recvmsg(fd: 51, msg: 0x7fff35673420, flags: CMSG_CLOEXEC) = -1 EAGAIN Resource temporarily unavailable
6.966 (0.008 ms): 589 sendmsg(fd: 50, msg: 0x7fff35673230, flags: NOSIGNAL ) = 961
6.984 (0.004 ms): 979 sendmsg(fd: 3, msg: 0x7fff5b484940, flags: NOSIGNAL ) = 945
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-h25k5k50nac0ej5cl5iwgvae@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 12 Sep 2013 14:27:34 +0000 (11:27 -0300)]
perf trace: Don't print zeroed args
This way we make the output more compact.
If somebody complain (and provide a sane reason why we would like to see
zeroes) we can make it an optional, ~/.perfconfig configurable knob.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-myqozw43hk8z2r5hsupzdk82@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Wed, 4 Sep 2013 18:37:44 +0000 (12:37 -0600)]
perf trace: Remove duplicate mmap entry in syscall_fmts array
Entries in syscall_fmts need to be in alphabetical order, and the
duplicate entry breaks bsearch on new entries around this duplicate
entry.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1378319865-55695-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Wed, 4 Sep 2013 18:37:43 +0000 (12:37 -0600)]
perf trace: Add option to show full timestamp
Current timestamp shown for output is time relative to firt sample. This
patch adds an option to show the absolute perf_clock timestamp which is
useful when comparing output across commands (e.g., perf-trace to
perf-script).
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1378319865-55695-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 4 Sep 2013 14:52:33 +0000 (11:52 -0300)]
perf trace: Beautify rlmimit resources
On the getrlimit, setrlimit and prlimit64 syscalls.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pups75313afhn7p96qwhzs9v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 4 Sep 2013 14:42:27 +0000 (11:42 -0300)]
perf trace: Beautify access 'mode' arg
Removing the _OK suffix and using RWX when all three bits are set, for
instance.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ypaz9k43lyqy94679feqnv8x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 4 Sep 2013 14:00:44 +0000 (11:00 -0300)]
perf trace: Beautify socket 'type' arg
Taking into account the fact that the SOCK_ types can be overriden for
ABI reasons on MIPS and also masking and interpreting the socket flags
(NONBLOCK and CLOEXEC), printing whatever is left in the flags bits
as an hex number, or'ed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cbn57082gq9v0sbsd67edwjq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 4 Sep 2013 13:27:41 +0000 (10:27 -0300)]
perf trace: Beautify socket 'family' arg
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8xuaupgmy82v7sha3l09oaux@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Sep 2013 20:17:15 +0000 (17:17 -0300)]
perf trace: Beautify signal number arg in several syscalls
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ek8w714ramabyl5jqqvjlbyb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Sep 2013 19:37:46 +0000 (16:37 -0300)]
perf trace: Beautify rt_sigprocmask 'how' arg
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-e2epkc38e3x0uqmi1xie4tgc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Sep 2013 19:28:58 +0000 (16:28 -0300)]
perf trace: Beautify fcntl 'cmd' arg
This is just for the low hanging fruit 'cmd' arg, a proper beautifier
will as well use arg->mask to ignore the third arg for some of the
cmds.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-phhvcyi9vdnxw9l11tbquvru@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Sep 2013 19:15:12 +0000 (16:15 -0300)]
perf trace: Use strarray for ltrace's whence arg
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5f9jhbq8my4ojarhtlygveox@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Sep 2013 18:50:28 +0000 (15:50 -0300)]
perf trace: Allow passing parms to arg formatters
So that we can have generic formatters that act upon specific
parameters.
Start using them with a simple string table that assumes entries
will be indexes to a string table, like with the 'which' parm
for the set and getitimer syscalls
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r0dqhapr8j6150v1wctgg340@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Sep 2013 15:20:12 +0000 (12:20 -0300)]
perf trace: Put syscall formatter parms into struct
So that we can add more state to formatters without having to modify
all of them.
Example is to pass a table to a generic string formatter, like for
setitimer 'which' arg.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zyi2esmas5wfrxznh0x0fkiz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 8 Oct 2013 15:51:10 +0000 (17:51 +0200)]
tools/perf/build: Clean up feature_print_code()
Remove DUMMY by making sure 'feature_print' is evaluated and thus
all messages are printed.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/20131008155110.GA15558@krava.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Mon, 7 Oct 2013 15:51:29 +0000 (17:51 +0200)]
tools/perf/build: Pass through LDFLAGS to feature tests
David Ahern reported that when passing in LDFLAGS=-static then
the feature checks still succeed - causing build failures down
the line because the static libraries are missing.
Solve this by passing through LDFLAGS to the feature-check
Makefile.
Reported-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20131007155129.GA1066@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Mon, 7 Oct 2013 11:27:23 +0000 (13:27 +0200)]
tools/perf/build: Harmonize the style of the feature testcases
The various testcases used different styles, which was not really
visible as long as they hid in feature-tests.mak. Now that they
are out in the open make them prettier.
( Also delete the leftover, empty feature-tests.mak file. )
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-drDWk8xltndjdsespzjbhu6w@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 4 Oct 2013 10:14:59 +0000 (12:14 +0200)]
tools/perf/build: Fix O=/some/dir perf.o type of targets
If someone specifies a single target, mixed with O=, the following way:
hubble:~/tip/tools/perf> make O=/tmp/perf util/stat.o
BUILD: Doing 'make -j8' parallel build
gcc -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k [...]
The build might even fail, if a target depends on other targets:
hubble:~/tip/tools/perf> make O=/tmp/perf perf.o
...
perf.c: In function ‘handle_options’:
perf.c:155:21: error: ‘PERF_HTML_PATH’ undeclared (first use in this function)
The correct way to invoke such targets is:
hubble:~/tip/tools/perf> make O=/tmp/perf /tmp/perf/perf.o
BUILD: Doing 'make -j8' parallel build
GEN /tmp/perf/common-cmds.h
CC /tmp/perf/perf.o
But that's unnecessary typing and it's also easy to mistakenly build into the
source directory.
To fix this remove the generic suffix rules and add redirection to $(OUTPUT)
for the most popular .o targets.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-mk0oiukmhgSbrll6chrPkkqr@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
projects / openwrt / staging / blogic.git / log