openwrt/staging/zorun.git
4 years agobase-files: use jshn lib for ubus sysupgrade argument generation
Florian Eckert [Mon, 7 Oct 2019 13:09:48 +0000 (15:09 +0200)]
base-files: use jshn lib for ubus sysupgrade argument generation

With this change the well known jshn library will be used, to build the
json arguments for the ubus sysupgrade method. This is also used in all
other shell program that uses JSON. This commit unifies that.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
4 years agorpcd: activate PIE ASLR by default
Petr Štetiar [Thu, 9 Jan 2020 13:09:44 +0000 (14:09 +0100)]
rpcd: activate PIE ASLR by default

This activates PIE ASLR support by default when the regular option is
selected.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
4 years agoodhcpd: activate PIE ASLR by default
Petr Štetiar [Thu, 9 Jan 2020 13:06:29 +0000 (14:06 +0100)]
odhcpd: activate PIE ASLR by default

This activates PIE ASLR support by default when the regular option is
selected.

Size increase on x86/64:

 odhcpd-ipv6only Installed-Size: 36821 -> 38216

Signed-off-by: Petr Štetiar <ynezz@true.cz>
4 years agoprocd: activate PIE ASLR by default
Petr Štetiar [Thu, 9 Jan 2020 13:05:39 +0000 (14:05 +0100)]
procd: activate PIE ASLR by default

This activates PIE ASLR support by default when the regular option is
selected.

Size increase on x86/64:

 procd Installed-Size: 44931 -> 47362

Signed-off-by: Petr Štetiar <ynezz@true.cz>
4 years agoubus: activate PIE ASLR by default
Petr Štetiar [Thu, 9 Jan 2020 13:04:39 +0000 (14:04 +0100)]
ubus: activate PIE ASLR by default

This activates PIE ASLR support by default when the regular option is
selected.

Size increase on x86/64:

 ubus  Installed-Size:  5602 ->  5950
 ubusd Installed-Size: 11643 -> 12119

Signed-off-by: Petr Štetiar <ynezz@true.cz>
4 years agouhttpd: Activate PIE by default
Hauke Mehrtens [Sun, 27 Oct 2019 14:13:30 +0000 (15:13 +0100)]
uhttpd: Activate PIE by default

This activates PIE ASLR support by default when the regular option is
selected.

This increases the binary size by 39% uncompressed and 21% compressed
on MIPS BE.

old:
33,189 /usr/sbin/uhttpd
23,016 uhttpd_2019-08-17-6b03f960-4_mips_24kc.ipk

new:
46,212 /usr/sbin/uhttpd
27,979 uhttpd_2019-08-17-6b03f960-4_mips_24kc.ipk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Petr Štetiar <ynezz@true.cz>
4 years agohostapd: Activate PIE by default
Hauke Mehrtens [Sun, 27 Oct 2019 14:01:42 +0000 (15:01 +0100)]
hostapd: Activate PIE by default

This activates PIE ASLR support by default when the regular option is
selected.

This increases the binary size by 26% uncompressed and 16% compressed
on MIPS BE.

old:
460,933 /usr/sbin/wpad
283,891 wpad-basic_2019-08-08-ca8c2bd2-1_mips_24kc.ipk

new:
584,508 /usr/sbin/wpad
330,281 wpad-basic_2019-08-08-ca8c2bd2-1_mips_24kc.ipk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Petr Štetiar <ynezz@true.cz>
4 years agodropbear: Activate PIE by default
Hauke Mehrtens [Sun, 27 Oct 2019 13:56:27 +0000 (14:56 +0100)]
dropbear: Activate PIE by default

This activates PIE ASLR support by default when the regular option is
selected.

This increases the binary size by 18% uncompressed and 17% compressed
on MIPS BE.

old:
164,261 /usr/sbin/dropbear
 85,648 dropbear_2019.78-2_mips_24kc.ipk

new:
194,492 /usr/sbin/dropbear
100,309 dropbear_2019.78-2_mips_24kc.ipk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Petr Štetiar <ynezz@true.cz>
4 years agodnsmasq: Activate PIE by default
Hauke Mehrtens [Sun, 27 Oct 2019 13:48:24 +0000 (14:48 +0100)]
dnsmasq: Activate PIE by default

This activates PIE ASLR support by default when the regular option is
selected.

This increases the binary size by 37% uncompressed and 18% compressed
on MIPS BE.

old:
146,933 /usr/sbin/dnsmasq
101,837 dnsmasq_2.80-14_mips_24kc.ipk

new:
202,020 /usr/sbin/dnsmasq
120,577 dnsmasq_2.80-14_mips_24kc.ipk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Petr Štetiar <ynezz@true.cz>
4 years agobuildsystem: Make PIE ASLR option tristate
Hauke Mehrtens [Sun, 27 Oct 2019 13:37:45 +0000 (14:37 +0100)]
buildsystem: Make PIE ASLR option tristate

This tristate choose allows to select to build only some applications
with PIE enabled. On MIPS binaries are getting about 30% bigger when PIE
is activated for the, which is a huge increase.

Network exposed applications like dnsmasq should then be build with PIE
enabled, but some applications which are normally not parsing data from
the network do not have it activated. The regular option should give a
good trade off between extra flash and RAM memory usage and security.

This changes the default from building no applications with PIE to build
some specifically marked applications with PIE enabled. This option is
only activated for targets with bigger flash and RAM to not consume
extra memory on the very small targets. On SDK builds the Regular option
should always be selected, because some tiny targets share the
applications with big targets and only the images for the tiny targets
should contain the none PIE applications, but the images for the normal
targets should use PIE. The shared packages should always use PIE when
it should be normally activated.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Petr Štetiar <ynezz@true.cz>
4 years agoethtool: bump to 5.4
Hans Dedecker [Sun, 12 Jan 2020 21:06:59 +0000 (22:06 +0100)]
ethtool: bump to 5.4

7dc0af7 Release version 5.4.
914912e ethtool: add 0x16 and 0x1c extended compliance codes
600b779 ethtool: mark 10G Base-ER as SFF-8472 revision 10.4 onwards
696565d ethtool: correctly interpret bitrate of 255
2941970 fix unused parameter warning in e1000_get_mac_type()
5e814f2 fix unused parameter warning in fjes_dump_regs()
b1a5279 fix unused parameter warning in ixgb_dump_regs()
6608751 fix unused parameter warning in ibm_emac_dump_regs()
1c30119 fix unused parameter warning in et131x_dump_regs()
a56aba4 fix unused parameter warning in amd8111e_dump_regs()
f40d32d fix unused parameter warning in fec_dump_regs()
8b84f1a fix unused parameter warning in at76c50x_usb_dump_regs()
f725f5a fix unused parameter warning in smsc911x_dump_regs()
a12cd66 fix unused parameter warning in e1000_dump_regs()
e058656 fix unused parameter warning in igb_dump_regs()
debac02 fix unused parameter warning in de2104[01]_dump_regs()
d434eea fix unused parameter warning in e100_dump_regs()
8df12f3 fix unused parameter warning in vioc_dump_regs()
92d716b fix unused parameter warning in tg3_dump_{eeprom, regs}()
211c99e fix unused parameter warning in fec_8xx_dump_regs()
362fb8b fix unused parameter warning in ixgbevf_dump_regs()
87903c2 fix unused parameter warning in st_{mac100, gmac}_dump_regs()
c1eaddf fix unused parameter warning in vmxnet3_dump_regs()
313c9f8 fix unused parameter warning in dsa_dump_regs()
183e8a2 fix unused parameter warning in {skge, sky2}_dump_regs()
7f84c13 fix unused parameter warning in lan78xx_dump_regs()
02d0aaa fix unused parameter warning in realtek_dump_regs()
726d607 fix unused parameter warning in ixgbe_dump_regs()
967177c fix unused parameter warning in netsemi_dump_eeprom()
710a414 fix unused parameter warning in natsemi_dump_regs()
283398a fix unused parameter warning in print_simple_table()
0404267 fix unused parameter warning in sfc_dump_regs()
57c7298 fix unused parameter warning in altera_tse_dump_regs()
302e91a fix unused parameter warning in dump_eeprom()
2054a8c fix unused parameter warning in find_option()
d5432a9 fix unused parameter warnings in do_version() and show_usage()
c430e75 fix arithmetic on pointer to void is a GNU extension warning
e568431 ethtool: implement support for Energy Detect Power Down
e391f4c ethtool: sync ethtool-copy.h: adds support for EDPD

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
4 years agonetfilter: add back nft_hash
David Bauer [Sun, 12 Jan 2020 17:05:52 +0000 (18:05 +0100)]
netfilter: add back nft_hash

nft_hash hash falsely removed in commit 97940f876616
("kernel: remove obsolete kernel version switches").

Add the module back, as otherwise the build fails.

Fixes: 97940f876616 ("kernel: remove obsolete kernel version switches")
Signed-off-by: David Bauer <mail@david-bauer.net>
4 years agokernel: remove obsolete kernel version switches
Adrian Schmutzler [Sun, 5 Jan 2020 13:35:15 +0000 (14:35 +0100)]
kernel: remove obsolete kernel version switches

After kernel 4.9 has been removed, this removes all (now obsolete)
kernel version switches that deal with versions before 4.14.

Package kmod-crypto-iv is empty now and thus removed entirely.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agogeneric: update config-4.14
David Bauer [Sun, 12 Jan 2020 14:34:57 +0000 (15:34 +0100)]
generic: update config-4.14

Builds for kenrel 4.14 targetswere failing because of
missing symbols for the B53 swconfig driver.

Fixes: 313bde53ce944 ("generic: update config-4.19")
Signed-off-by: David Bauer <mail@david-bauer.net>
4 years agoipq40xx: add support for EZVIZ CS-W3-WD1200G EUP
Tom Brouwer [Sun, 12 Jan 2020 12:13:30 +0000 (13:13 +0100)]
ipq40xx: add support for EZVIZ CS-W3-WD1200G EUP

Hardware:
SOC:    Qualcomm IPQ4018
RAM: 128 MB Nanya NT5CC64M16GP-DI
FLASH:  16 MB Macronix MX25L12805D
ETH:    Qualcomm QCA8075 (4 Gigabit ports, 3xLAN, 1xWAN)
WLAN:   Qualcomm IPQ4018 (2.4 & 5 Ghz)
BUTTON: Shared WPS/Reset button
LED:    RGB Status/Power LED
SERIAL: Header J8 (UART, Left side of board). Numbered from
        top to bottom:
        (1) GND, (2) TX, (3) RX, (4) VCC (White triangle
        next to it).
        3.3v, 115200, 8N1

Tested/Working:
* Ethernet
* WiFi (2.4 and 5GHz)
* Status LED
* Reset Button (See note below)

Implementation notes:
* The shared WPS/Reset button is implemented as a Reset button
* I could not find a original firmware image to reverse engineer, meaning
currently it's not possible to flash OpenWrt through the Web GUI.

Installation (Through Serial console & TFTP):
1. Set your PC to fixed IP 192.168.1.12, Netmask 255.255.255.0, and connect to
one of the LAN ports
2. Rename the initramfs image to 'C0A8010B.img' and enable a TFTP server on
your pc, to serve the image
2. Connect to the router through serial (See connection properties above)
3. Hit a key during startup, to pause startup
4. type `setenv serverip 192.168.1.12`, to set the tftp server address
5. type `tftpboot`, to load the image from the laptop through tftp
6. type `bootm` to run the loaded image from memory
6. (If you want to return to stock firmware later, create an full MTD backup,
e.g. using instructions here https://openwrt.org/docs/guide-user/installation/generic.backup#create_full_mtd_backup)
7. Transfer the 'sysupgrade' OpenWrt firmware image from PC to router, e.g.:
`scp xxx-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/upgrade.bin`
8. Run sysupgrade to permanently install OpenWrt to flash: `sysupgrade -n /tmp/upgrade.bin`

Revert to stock:
To revert to stock, you need the MTD backup from step 6 above:
1. Unpack the MTD backup archive
2. Transfer the 'firmware' partition image to the router (e.g. mtd8_firmware.backup)
3. On the router, do `mtd write mtd8_firmware.backup firmware`

Signed-off-by: Tom Brouwer <tombrouwer@outlook.com>
[removed BOARD_NAME, OpenWRT->OpenWrt, changed LED device name to board name]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
4 years agoipq40xx: fix usbport trigger on the RT-AC58U with USB 2.0 devices
Christian Lamparter [Fri, 10 Jan 2020 22:51:05 +0000 (23:51 +0100)]
ipq40xx: fix usbport trigger on the RT-AC58U with USB 2.0 devices

This patch partially reverts
"ipq40xx: remove unnecessary usb nodes in DTS for ASUS RT-AC58U"
as the change removed the usb2 port-trigger, so the LED would no
longer light-up when a USB 2.0 was inserted into the USB port.

Fixes: d0efb1ba95f3 ("ipq40xx: remove unnecessary usb nodes in DTS for ASUS RT-AC58U")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
4 years agoath79: add support for Ubiquiti ToughSwitch/EdgeSwitch 8XP
Tobias Schramm [Tue, 3 Dec 2019 21:48:35 +0000 (22:48 +0100)]
ath79: add support for Ubiquiti ToughSwitch/EdgeSwitch 8XP

Flash:    8 MB
RAM:      64 MB
SoC:      AR7242
Switch:   bcm53128
USB:      1x USB 2.0
Ethernet: 8x GbE, 1x FE

The Ubiquiti ToughSwitch 8XP is a 8-port PoE Gigabit switch with a single
Fast-Ethernet management port. It supports both 24V passive PoE and 48V
802.11af/at PoE out on all eight ports.

By default the single Fast-Ethernet port labeled "MGMT" is configured as the
WAN port. Thus access to the device is only possible via the eight switch
ports.

Installation of the firware is possible either via serial + tftpboot or
the factory firmware update function via webinterface.

Serial: 3v3 115200 8n1

The serial header is located in the lower left corner of the switches PCB:

|
|
|
| o
| o RX
| o TX
| o GND
|
|
++  +-++-+  ++  ++  +
 +--+ ++ +--++--++--+

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
[fix whitespace issue]
Signed-off-by: David Bauer <mail@david-bauer.net>
4 years agogeneric: update config-4.19
Tobias Schramm [Tue, 3 Dec 2019 22:26:44 +0000 (23:26 +0100)]
generic: update config-4.19

config was missing some SWCONFIG_B53 options

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
4 years agokernel: add kmod packages for Broadcom bcm53xxx switch support
Tobias Schramm [Tue, 3 Dec 2019 21:46:01 +0000 (22:46 +0100)]
kernel: add kmod packages for Broadcom bcm53xxx switch support

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
4 years agoath79: add support for Ubiquiti SW devices
Tobias Schramm [Tue, 3 Dec 2019 21:39:01 +0000 (22:39 +0100)]
ath79: add support for Ubiquiti SW devices

SW devices are Ubiquit ToughSwitch and EdgeSwitch series devices.
Hardware-wise they are very similar to the XM device series.

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
4 years agofirmware-utils: mkfwimage: add support for Ubiquiti SW devices
Tobias Schramm [Tue, 3 Dec 2019 21:33:32 +0000 (22:33 +0100)]
firmware-utils: mkfwimage: add support for Ubiquiti SW devices

This commit adds support for Ubiquiti ToughSwitch XP (and probably also
EdgeSwitch XP) devices. They are mostly based on the same hardware as
MX devices.

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
4 years agoswconfig: fix Broadcom b53 support
Tobias Schramm [Tue, 3 Dec 2019 21:30:00 +0000 (22:30 +0100)]
swconfig: fix Broadcom b53 support

This commit fixes a bug in the main swconfig patch where a function
needed by the b53 driver is not exported.
Additionally it adds OF support to the b53_mdio driver for devicetree-
based probing

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
4 years agokmod-sched-cake: bump to 20200110
Kevin Darbyshire-Bryant [Sat, 11 Jan 2020 08:35:23 +0000 (08:35 +0000)]
kmod-sched-cake: bump to 20200110

Keep up with a small amount of churn in the upstream repository.
Upstream now represents the version of CAKE as found in the linux kernel
from 4.19 onwards but with some compatibility stubs to allow building on
<4.19.

After a diversion related to an experimental ECN implementation which
has now been reverted, the important and relevant changes for us are:

8a8946b sch_cake: avoid possible divide by zero in cake_enqueue()
183b320 RFC 8622 diffserv3, 4 & 8 LE PHB support
6ff4561 sch_cake: Make sure we can write the IP header before changing DSCP bits
9fba602 sch_cake: Use tc_skb_protocol for getting packet protocol

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agoath79: gl-ar750s: reduce kernel size to 2M in image Makefile
Chuanhong Guo [Wed, 8 Jan 2020 12:18:56 +0000 (20:18 +0800)]
ath79: gl-ar750s: reduce kernel size to 2M in image Makefile

u-boot splits nand factory firmware at 2M offset, flash the first
part as kernel into spi nor and the other part as ubi into nand
flash. With previous commit increasing kernel size to 4M, generated
factory firmware is broken because ubi is at 4M offset.

This commit reduces kernel size definition to 2M in image Makefile,
producing proper factory image. Partition size in dts is kept
unchanged so that sysupgrade to a firmware with 2M+ kernel still
works.

Fixes: b496a2294c ("ath79: GL-AR750S: provide NAND support; increase kernel to 4 MB")
Reported-by: Jeff Kletsky <git-commits@allycomm.com>
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
4 years agowireguard-tools: bump to 1.0.20200102
Jason A. Donenfeld [Wed, 8 Jan 2020 22:37:41 +0000 (17:37 -0500)]
wireguard-tools: bump to 1.0.20200102

* systemd: update documentation URL
* global: bump copyright

Usual house keeping.

* Makefile: DEBUG_TOOLS -> DEBUG and document
* Makefile: port static analysis check
* dns-hatchet: adjust path for new repo layout
* Makefile: rework automatic version.h mangling

These are some important-ish cleanups for downstream package maintainers that
should make packaging this a lot smoother.

* man: add documentation about removing explicit listen-port

Documentation improvement.

* wg-quick: linux: quote ifname for nft

This should fix issues with weirdly named ifnames and odd versions of nft(8).

* fuzz: find bugs in the config syntax parser
* fuzz: find bugs when parsing uapi input

These are two fuzzers that have been laying around without a repo for a while.
Perhaps somebody with enough compute power will find bugs with them.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
4 years agowireguard: bump to 0.0.20200105
Jason A. Donenfeld [Wed, 8 Jan 2020 22:37:40 +0000 (17:37 -0500)]
wireguard: bump to 0.0.20200105

* socket: mark skbs as not on list when receiving via gro

Certain drivers will pass gro skbs to udp, at which point the udp driver
simply iterates through them and passes them off to encap_rcv, which is
where we pick up. At the moment, we're not attempting to coalesce these
into bundles, but we also don't want to wind up having cascaded lists of
skbs treated separately. The right behavior here, then, is to just mark
each incoming one as not on a list. This can be seen in practice, for
example, with Qualcomm's rmnet_perf driver. This lead to crashes on
OnePlus devices and possibly other Qualcomm 4.14 devices. But I fear
that it could lead to issues on other drivers on weird OpenWRT routers.

This commit is upstream in net-next as:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=736775d06bac60d7a353e405398b48b2bd8b1e54

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
4 years agoramips: add support for TP-Link Archer C20 v5
Maxim Anisimov [Wed, 18 Dec 2019 06:52:44 +0000 (09:52 +0300)]
ramips: add support for TP-Link Archer C20 v5

TP-Link Archer C20 v5 is a router with 5-port FE switch and
non-detachable antennas. It's based on MediaTek MT7628N+MT7610EN.

Specification:
- MediaTek MT7628N/N (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 5x 10/100 Mbps Ethernet
- 3x external, non-detachable antennas
- UART (J1) header on PCB (115200 8n1)
- 7x LED (GPIO-controlled*), 2x button, power input switch

* WAN LED in this devices is a dual-color, dual-leads type which isn't
  (fully) supported by gpio-leds driver. This type of LED requires both
  GPIOs state change at the same time to select color or turn it off.
  For now, we support/use only the green part of the LED.

Create Factory image
--------------------
As all installation methods require a U-Boot to be integrated into the
Image (and we do not ship one with the image) we are not able to create
an image in the OpenWRT build-process.

Download a TP-Link image from their Website and a OpenWRT sysupgrade
image for the device and build yourself a factory image like following:

TP-Link image:             tpl.bin
OpenWRT sysupgrade image:  owrt.bin

 > dd if=tpl.bin of=boot.bin bs=131584 count=1
 > cat owrt.bin >> boot.bin

Installing via Web-UI
---------------------
Upload the boot.bin via TP-Links firmware upgrade tool in the
web-interface.

Installing via Recovery
-----------------------
Activate Web-Recovery by beginning the upgrade Process with a
Firmware-Image from TP-Link. After starting the Firmware Upgrade,
wait ~3 seconds (When update status is switching to 0%), then
disconnect the power supply from the device. Upgrade flag (which
activates Web-Recovery) is written before the OS-image is touched and
removed after write is succesfull, so this procedure should be safe.

Plug the power back in. It will come up in Recovery-Mode on 192.168.0.1.
When active, all LEDs but the WPS LED are off.
Remeber to assign yourself a static IP-address as DHCP is not active in
this mode.

The boot.bin can now be uploaded and flashed using the web-recovery.

Installing via TFTP
-------------------
Prepare an image like following (Filenames from factory image steps
apply here)

 > dd if=/dev/zero of=tp_recovery.bin bs=196608 count=1
 > dd if=tpl.bin of=tmp.bin bs=131584 count=1
 > dd if=tmp.bin of=boot.bin bs=512 skip=1
 > cat boot.bin >> tp_recovery.bin
 > cat owrt.bin >> tp_recovery.bin

Place tp_recovery.bin in root directory of TFTP server and listen on
192.168.0.66/24.

Connect router LAN ports with your computer and power up the router
while pressing the reset button. The router will download the image via
tftp and after ~1 Minute reboot into OpenWRT.

U-Boot CLI
----------
U-Boot CLI can be activated by holding down '4' on bootup.

Dual U-Boot
-----------
This is TP-Link MediaTek device with a split-uboot feature design like
a TP-Link Archer C50 v4. The first (factory-uboot) provides recovery via
TFTP and HTTP, jumping straight into the second (firmware-uboot) if no
recovery needs to be performed. The firmware-uboot unpacks and executed
the kernel.

Web-Recovery
------------
TP-Link integrated a new Web-Recovery like the one on the Archer C7v4 /
TL-WR1043v5 / Archer C50v4. Stock-firmware sets a flag in the "romfile"
partition before beginning to write and removes it afterwards. If the
router boots with this flag set, bootloader will automatically start
Web-recovery and listens on 192.168.0.1. This way, the vendor-firmware
or an OpenWRT factory image can be written.

By doing the same while performing sysupgrade, we can take advantage of
the Web-recovery in OpenWRT.

It is important to note that Web-Recovery is only based on this flag. It
can't detect e.g. a crashing kernel or other means. Once activated it
won't boot the OS before a recovery action (either via TFTP or HTTP) is
performed. This recovery-mode is indicated by an illuminated WPS-LED on
boot.

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
[adjust some node names for LEDs in DTS]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoramips: fix leds for TP-Link Archer C20 v4
Maxim Anisimov [Wed, 18 Dec 2019 06:48:38 +0000 (09:48 +0300)]
ramips: fix leds for TP-Link Archer C20 v4

- add "gpio" group for wan_orange led
- use tpt triggers for wifi led indication
- add wifi 5 GHz led support

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
[slight commit message adjustment]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agodnsmasq: add uci-defaults script for config migration
Daniel Golle [Thu, 9 Jan 2020 13:32:12 +0000 (15:32 +0200)]
dnsmasq: add uci-defaults script for config migration

When running sysupgrade from an existing configuration, UCI option
dhcp.@dnsmasq[0].resolvfile needs to be modified in case it has not
been changed from it's original value.
Accomplish that using a uci-defaults script.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
4 years agoramips: disable image build for HiWiFi HC5962
David Bauer [Thu, 9 Jan 2020 11:32:16 +0000 (12:32 +0100)]
ramips: disable image build for HiWiFi HC5962

Image builds for the ramips-mt7621 target currently fail with:
> WARNING: Image file ./hiwifi_hc5962-kernel.bin is too big
Disable this board for now. It can still be built using the SDK.

Signed-off-by: David Bauer <mail@david-bauer.net>
4 years agohostapd: disable ft_psk_generate_local for non-PSK networks
David Bauer [Sun, 5 Jan 2020 23:13:58 +0000 (00:13 +0100)]
hostapd: disable ft_psk_generate_local for non-PSK networks

Without this commit, ft_psk_generate_local is enabled for non-PSK
networks by default. This breaks 802.11r for EAP networks.

Disable ft_psk_generate_local by default for non-PSK networks resolves
this misbehavior.

Reported-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Signed-off-by: David Bauer <mail@david-bauer.net>
Tested-by: Martin Weinelt <martin@darmstadt.freifunk.net>
4 years agokernel: remove support for kernel 4.9
Adrian Schmutzler [Sun, 5 Jan 2020 13:15:44 +0000 (14:15 +0100)]
kernel: remove support for kernel 4.9

No target uses kernel 4.9 anymore.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoixp4xx: remove unmaintained target
Adrian Schmutzler [Sun, 5 Jan 2020 12:57:48 +0000 (13:57 +0100)]
ixp4xx: remove unmaintained target

This target is still on kernel 4.9, and it looks like there is no
active maintainer for this target anymore.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoorion: remove unmaintained target
Adrian Schmutzler [Sun, 5 Jan 2020 13:06:30 +0000 (14:06 +0100)]
orion: remove unmaintained target

This target seems to have been unmaintained for quite a while, and not a
single tester for the (now outdated) kernel 4.14 patches has been found.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoar7: remove unmaintained target
Adrian Schmutzler [Sun, 5 Jan 2020 12:49:38 +0000 (13:49 +0100)]
ar7: remove unmaintained target

This target seems to have been unmaintained for quite a while, and not a
single tester for the (now outdated) kernel 4.14 patches has been found.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoorion: update kernel to version 4.14
Hauke Mehrtens [Sat, 11 May 2019 11:51:08 +0000 (13:51 +0200)]
orion: update kernel to version 4.14

This adds support for kernel 4.14 to the target and directly make it the
default kernel version to use.

This patch is build-tested only, but has never been device-tested. It is
only added to preserve the changes in Git history prior to removing this
target. Use it with care.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
[rebased and extended commit message, refreshed patches for 4.14.162]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoorion: refresh kernel configuration
Hauke Mehrtens [Sat, 11 May 2019 11:51:07 +0000 (13:51 +0200)]
orion: refresh kernel configuration

The configuration of the generic subtarget was used as the default
configuration and then the subtarget configurations were adapted.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agoar7: update kernel to version 4.14
Hauke Mehrtens [Sat, 11 May 2019 11:47:37 +0000 (13:47 +0200)]
ar7: update kernel to version 4.14

This adds support for kernel 4.14 to the target and directly make it the
default kernel version to use.

This patch is build-tested only, but has never been device-tested. It is
only added to preserve the changes in Git history prior to removing this
target. Use it with care.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
[rebased and extended commit message, refreshed patches for 4.14.162]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoar7: refresh kernel configuration
Hauke Mehrtens [Sat, 11 May 2019 11:47:36 +0000 (13:47 +0200)]
ar7: refresh kernel configuration

The configuration of the generic subtarget was used as the default
configuration and then the subtarget configurations were adapted.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agoramips: add label MAC address for Xiaomi MIR3G
Adrian Schmutzler [Wed, 8 Jan 2020 15:27:52 +0000 (16:27 +0100)]
ramips: add label MAC address for Xiaomi MIR3G

The device label shows the address currently assigned to the OpenWrt
LAN interface.

Current setup is:
LAN  *:b8  factory 0xe006  label
WAN  *:b7  factory 0xe000

For vendor FW bootlog we get (manually removed parts of the address):
[    7.520000] set LAN/WAN LWLLL
[    7.530000] GMAC1_MAC_ADRH -- : 0x00004031
[    7.530000] GMAC1_MAC_ADRL -- : 0x3c****b7
[    7.530000] GDMA2_MAC_ADRH -- : 0x00004031
[    7.540000] GDMA2_MAC_ADRL -- : 0x3c****b8
[    7.540000] eth1: ===> VirtualIF_open

Without further information, this does not allow verification of
the currently unexpected LAN/WAN assignment (we would expect 0xe000
to be LAN).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoath79: remove unused Build/mktplinkfw-combined
Adrian Schmutzler [Tue, 31 Dec 2019 13:03:57 +0000 (14:03 +0100)]
ath79: remove unused Build/mktplinkfw-combined

Build/mktplinkfw-combined is not used anywhere, so remove it.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agotreewide: move mktplinkfw to tplink-v1-image in image-commands.mk
Adrian Schmutzler [Tue, 31 Dec 2019 12:57:50 +0000 (13:57 +0100)]
treewide: move mktplinkfw to tplink-v1-image in image-commands.mk

This move the slightly different target-specific implementations of
mktplinkfw from the targets to include/image-commands.mk and renames
it to tplink-v1-image. Having a common version will increase
consistency between implementation and will complete the
tplink build command already present in the new location.

Due to the slight differences of the original implementations, this
also does some adjustments to the device build commands/variables.

This also moves rootfs_align as this is required as dependency.

Tested on:
- TL-WDR4300 v1 (ath79, factory)
- TL-WDR4900 v1 (mpc85xx, sysupgrade)
- RE210 v1 (ramips, see Tested-by)

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Christoph Krapp <achterin@googlemail.com>
4 years agoipq806x: refresh kernel patches
Álvaro Fernández Rojas [Wed, 8 Jan 2020 13:33:03 +0000 (14:33 +0100)]
ipq806x: refresh kernel patches

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
4 years agoipq806x: add fab scaling support
Ansuel Smith [Sat, 28 Dec 2019 16:34:36 +0000 (17:34 +0100)]
ipq806x: add fab scaling support

Add fab scaling support and dtsi definition

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
4 years agoipq806x: refactor l2 freq scaling patch
Ansuel Smith [Sun, 5 Jan 2020 17:15:22 +0000 (18:15 +0100)]
ipq806x: refactor l2 freq scaling patch

Refactor l2 freq scaling patch to support voltage
scaling and add support to base cache scaling on
cpu freq scaling. Update the dtsi files with the new
definition used in the new code.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
4 years agoipq806x: reorganize nand_pins mux definition
Ansuel Smith [Wed, 25 Dec 2019 19:44:06 +0000 (20:44 +0100)]
ipq806x: reorganize nand_pins mux definition

It's wrong set the mux to bias-disable. The best way to
do this is by creating a separate group and disable the
specific pins.

By documentation, any subgroup with no bias definition
is ignored so the mux definition is useless.
Rework the definition by sremoving the mux subgroup and
set the remaining subgroup with the mux function and
drive-strength

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
4 years agoipq806x: opp/core: fix broken patch Handle opp voltage adjust
Ansuel Smith [Wed, 25 Dec 2019 18:42:08 +0000 (19:42 +0100)]
ipq806x: opp/core: fix broken patch Handle opp voltage adjust

The opp_notifier introduced with patch 0054-Handle-OPP-voltage adjust
for some reason missed the actual registration in the opp struct,
resulting in never being registred.
This was present in kernel 4.9 patchset but dropped in the transition
 to 4.14. Reintroduce this and fix patch 0055 about L2 cache scaling.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
4 years agoethtool: fix PKG_CONFIG_DEPENDS
Matthias Schiffer [Tue, 7 Jan 2020 19:53:31 +0000 (20:53 +0100)]
ethtool: fix PKG_CONFIG_DEPENDS

Add missing CONFIG_ prefix.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
4 years agoiperf: fix PKG_CONFIG_DEPENDS
Matthias Schiffer [Tue, 7 Jan 2020 19:52:23 +0000 (20:52 +0100)]
iperf: fix PKG_CONFIG_DEPENDS

Fix typo in PKG_CONFIG_DEPENDS and missing CONFIG_ prefix.

Fixes: e98e046f06f3 ("iperf: Allow enabling multicast support")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
4 years agodnsmasq: bump PKG_RELEASE
Daniel Golle [Tue, 7 Jan 2020 13:42:42 +0000 (15:42 +0200)]
dnsmasq: bump PKG_RELEASE

Previous commit should have bumped PKG_RELEASE, but git add was
forgotten... Add it now.

Fixes: cd48d8d342 ("dnsmasq: switch to /tmp/resolv.conf.d/resolv.conf.auto")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
4 years agodnsmasq: switch to /tmp/resolv.conf.d/resolv.conf.auto
Daniel Golle [Fri, 3 Jan 2020 11:39:06 +0000 (13:39 +0200)]
dnsmasq: switch to /tmp/resolv.conf.d/resolv.conf.auto

Mount-bind directory instead of resolv.conf.auto file in jail to
avoid problems when the file is deleted/replaced.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
4 years agonetifd: move /tmp/resolv.conf.auto to /tmp/resolv.conf.d/
Daniel Golle [Tue, 7 Jan 2020 13:33:47 +0000 (15:33 +0200)]
netifd: move /tmp/resolv.conf.auto to /tmp/resolv.conf.d/

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
4 years agobase-files: move /tmp/resolv.conf.auto to /tmp/resolv.conf.d/
Daniel Golle [Wed, 1 Jan 2020 02:11:54 +0000 (04:11 +0200)]
base-files: move /tmp/resolv.conf.auto to /tmp/resolv.conf.d/

Having it in a directory it more friendly for mount-bind.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
4 years agodnsmasq: Fix potential dnsmasq crash with TCP
Hauke Mehrtens [Mon, 6 Jan 2020 15:21:25 +0000 (16:21 +0100)]
dnsmasq: Fix potential dnsmasq crash with TCP

This is a backport from the dnsmasq master which should fix a bug which
could cause a crash in dnsmasq.

I saw the following crashes in my log:
[522413.117215] do_page_fault(): sending SIGSEGV to dnsmasq for invalid read access from 2a001450
[522413.124464] epc = 004197f1 in dnsmasq[400000+23000]
[522413.129459] ra  = 004197ef in dnsmasq[400000+23000]
This is happening in blockdata_write() when block->next is
dereferenced, but I am not sure if this is related to this problem or if
this is a different problem. I am unable to reproduce this problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agoramips: add support for ipTIME A8004T
Yong-hyu Ban [Sun, 6 Oct 2019 20:06:31 +0000 (05:06 +0900)]
ramips: add support for ipTIME A8004T

ipTIME A8004T is a 2.4/5GHz band AC2600 router, based on Mediatek
MT7621A.

Specifications:
- SoC: MT7621A
- RAM: DDR3 256M
- Flash: SPI NOR 16MB
- WiFi:
  - 2.4GHz: MT7615E
  - 5GHz: MT7615E
- Ethernet: 5x 10/100/1000Mbps
  - Switch: SoC internal
- USB: 1 * USB3.0 port
- UART:
  - J4: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1
- Other info:
  - J9: Unknown unpopulated header.

Installation via web interface:
1.  Flash **initramfs** image through the stock web interface.
2.  Boot into OpenWrt and perform sysupgrade with sysupgrade image.

Revert to stock firmware:
1.  Perform sysupgrade with stock image.

Signed-off-by: Yong-hyu Ban <perillamint@quendi.moe>
[do not enable xhci node in DTS which is already enabled in DTSI]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoramips: add label MAC address for Netgear EX6130
Adrian Schmutzler [Sun, 5 Jan 2020 22:19:45 +0000 (23:19 +0100)]
ramips: add label MAC address for Netgear EX6130

The MAC address on the label of this device corresponds to the
2.4 GHz and ethernet MAC address.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agorpcd: Update to version 2020-01-05
Hauke Mehrtens [Sun, 5 Jan 2020 19:21:48 +0000 (20:21 +0100)]
rpcd: Update to version 2020-01-05

efe51f4 iwinfo: add current hw and ht mode to info call

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agoiwinfo: Update to version 2020-01-05
Hauke Mehrtens [Sun, 5 Jan 2020 19:19:37 +0000 (20:19 +0100)]
iwinfo: Update to version 2020-01-05

bf2c106 nl80211: add htmode to iwinfo_ops

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agouclient: Update to version 2020-01-05
Hauke Mehrtens [Sun, 5 Jan 2020 18:54:27 +0000 (19:54 +0100)]
uclient: Update to version 2020-01-05

fef6d3d uclient: Add string error function

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agoustream-ssl: Update to version 2020-01-05
Hauke Mehrtens [Sun, 5 Jan 2020 18:51:19 +0000 (19:51 +0100)]
ustream-ssl: Update to version 2020-01-05

30cebb4 ustream-ssl: mbedtls: fix ssl client verification
77de09f ustream-ssl: mbedtls: fix net_sockets.h include warning

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agoubus: Update to version 2020-01-05
Hauke Mehrtens [Sun, 5 Jan 2020 18:48:28 +0000 (19:48 +0100)]
ubus: Update to version 2020-01-05

d35df8a ubus: make libubus ready for linking into C++

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agomake_ext4fs: Update to version 2020-01-05
Hauke Mehrtens [Sun, 5 Jan 2020 18:40:37 +0000 (19:40 +0100)]
make_ext4fs: Update to version 2020-01-05

5c201be Add LDFLAGS when building libsparse.a
ec17045 make_ext4fs: fix build on musl systems

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agoramips: remove duplicate dts nodes of MediaTek LinkIt Smart 7688
Jack Chen [Sun, 5 Jan 2020 16:43:57 +0000 (00:43 +0800)]
ramips: remove duplicate dts nodes of MediaTek LinkIt Smart 7688

There are two identical wmac nodes in the dts file of MediaTek
LinkIt Smart 7688, so delete one of them.

Signed-off-by: Jack Chen <redchenjs@live.com>
4 years agoead: fix resource leak in tinysrp
Andrea Dalla Costa [Sat, 28 Dec 2019 20:05:16 +0000 (21:05 +0100)]
ead: fix resource leak in tinysrp

Add call to fclose for file pointer fp in function t_openpw.
The resource leak could happen during an error handling.

Signed-off-by: Andrea Dalla Costa <andrea@dallacosta.me>
4 years agoramips: reduce lzma dictionary size for D-Link DIR-645
Mason Clarke [Sun, 29 Dec 2019 18:03:00 +0000 (19:03 +0100)]
ramips: reduce lzma dictionary size for D-Link DIR-645

Currently this device fails to boot with the OpenWrt snapshot images
(release images are unaffected). The error message is:
"LZMA ERROR 1 - must RESET board to recover".

This happens because the kernel image is too big for the bootloader
to boot. This commit works around this by decreasing the lzma dictionary
size option from the default 23 to 10.

Before this change the current OpenWrt snapshot image (uncompressed
kernel size 4875139 bytes) failed to boot, while now an even bigger
image (kernel 4.19 with snapshot default config; uncompressed kernel
size 5162833 bytes) boots just fine.

The highest lzma dictionary size option this image booted with was 11.
10 was chosen to have a bit more room for growth.

An unavoidable side-effect of this change is that the compressed kernel
image will take up more space.

Total image size with different dictionary size options:
D23 - 3973903 bytes (base)
D16 - 4113167 bytes (+3.5%  - +139264 bytes)
D12 - 4317967 bytes (+8.7%  - +344064‬ bytes)
D11 - 4383503 bytes (+10.3% - +409600 bytes)
D10 - 4461327 bytes (+12.3% - +487424 bytes)

Fixes: FS#1484
Signed-off-by: Mason Clarke <mclarke2355@gmail.com>
4 years agopppd: update to 2.4.8
DENG Qingfang [Wed, 1 Jan 2020 07:23:32 +0000 (15:23 +0800)]
pppd: update to 2.4.8

78cd384 Update README and patchlevel.h for 2.4.8 release
5d03403 pppd: Avoid use of strnlen (and strlen) in vslprintf
a1e950a pppd: Fix IPv6 default route code for Solaris
ca5e61b plugins/rp-pppoe: Make tag parsing loop condition more accurate
c10c3c7 pppd: Make sure word read from options file is null-terminated
b311e98 pppd: Limit memory accessed by string formats with max length specified
3ea9de9 pppd: Eliminate some more compiler warnings
57edb1a pppd: Include time.h header before using time_t
09f695f pppd: Don't free static string
03104ba pppd.h: Add missing headers
388597e pppd: Add defaultroute6 and related options
66ce4ba pppd: Avoid declarations within statements in main.c
5637180 pppd: Fix `ifname` option in case of multilink (#105)
d00f8a0 pppd: Fix variable reference syntax in Makefile.linux
b6b4d28 pppd: Check tdb pointer before closing

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agodropbear: add missing zlib dependency for dropbearconvert
Matt Merhar [Wed, 1 Jan 2020 07:58:34 +0000 (02:58 -0500)]
dropbear: add missing zlib dependency for dropbearconvert

If CONFIG_DROPBEAR_ZLIB is set, building fails at the packaging stage
due to an undeclared dependency on libz.so.1.

As is already done for the main dropbear package, conditionally add a
dependency on zlib.

Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
4 years agoath79: use ath10k-ct-smallbuffers for TP-Link RE355/RE450 v1
Christoph Krapp [Thu, 2 Jan 2020 09:30:37 +0000 (10:30 +0100)]
ath79: use ath10k-ct-smallbuffers for TP-Link RE355/RE450 v1

Both devices are available in 64M and 128M RAM configurations but there
is no visial indication which configuration one might get.
So just to be sure we properly support both configurations switch to
kmod-atk10k-ct-smallbuffers.

Signed-off-by: Christoph Krapp <achterin@googlemail.com>
4 years agonettle: Disable ARMEB assembly
Rosen Penev [Sat, 28 Dec 2019 06:51:42 +0000 (22:51 -0800)]
nettle: Disable ARMEB assembly

It's broken for ARMv5, which is the only armeb target in OpenWrt.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
4 years agoath79: drop obsolete ehci hacks
Bjørn Mork [Mon, 30 Dec 2019 21:10:27 +0000 (22:10 +0100)]
ath79: drop obsolete ehci hacks

There's nothing enabling these hacks in ath79, so drop the redundant
patches.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
4 years agotrace-cmd: Fix compilation without fortify-headers
Rosen Penev [Tue, 31 Dec 2019 03:24:01 +0000 (19:24 -0800)]
trace-cmd: Fix compilation without fortify-headers

Upstream backport.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
4 years agolldpd: Fix compilation without fortify-headers
Rosen Penev [Tue, 31 Dec 2019 03:26:55 +0000 (19:26 -0800)]
lldpd: Fix compilation without fortify-headers

Upstream backport.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
4 years agoe2fsprogs: update to version 1.45.4
Josef Schlehofer [Wed, 1 Jan 2020 16:22:01 +0000 (17:22 +0100)]
e2fsprogs: update to version 1.45.4

Removed backported patch

Release notes: http://e2fsprogs.sourceforge.net/e2fsprogs-release.html#1.45.4

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
4 years agolibcxx: Remove -flto from LDFLAGS
Rosen Penev [Sat, 4 Jan 2020 02:31:01 +0000 (18:31 -0800)]
libcxx: Remove -flto from LDFLAGS

It seems the buildbots can't handle it.

Added a cmake option to find the cxxabi files as they are part of the
toolchain and not in the normal path. It doesn't seem to make a
difference, just gets rid of cmake warnings.

Added another small GCC warning fix. It's fairly minor.

This has no change in compiled size, and most likely no change in
behavior. Bumped the PKG_RELEASE anyway.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
4 years agostrace: update to version 5.4
Josef Schlehofer [Sat, 4 Jan 2020 09:18:50 +0000 (10:18 +0100)]
strace: update to version 5.4

Changelog: https://strace.io/files/5.4/

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
4 years agoath79: Remove mtd cfi_cmdset_0002 status check patches
Tokunori Ikegami [Sun, 5 Jan 2020 08:13:03 +0000 (17:13 +0900)]
ath79: Remove mtd cfi_cmdset_0002 status check patches

Currently the patch only changes break to use goto statement instead.
But not necessary acutually since the ret value checked after the for loop.
So it is okay for the break case before changed by the patch also.

This patch only reverts the following commit partially.
  https://github.com/openwrt/openwrt/commit/ddc11c3932c7b7b7df7d5fbd48f207e7
    Note: The changes are mainly applied into the linux kernel upstream.

Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Cc: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years agoar71xx: Remove mtd cfi_cmdset_0002 status check patch
Tokunori Ikegami [Sun, 5 Jan 2020 08:13:02 +0000 (17:13 +0900)]
ar71xx: Remove mtd cfi_cmdset_0002 status check patch

Currently the patch only changes break to use goto statement instead.
But not necessary acutually since the ret value checked after the for loop.
So it is okay for the break case before changed by the patch also.

This patch only reverts the following commit partially.
  https://github.com/openwrt/openwrt/commit/ddc11c3932c7b7b7df7d5fbd48f207e77619eaa7
    Note: The changes are mainly applied into the linux kernel upstream.

Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Cc: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years agomac80211: remove ath10k_pci memory hacks
Christian Lamparter [Tue, 24 Dec 2019 11:11:59 +0000 (12:11 +0100)]
mac80211: remove ath10k_pci memory hacks

These two hacks are no longer necessary as they've
been moved to a special variant of kmod-ath10k-ct.

So, if you have a device suffering from low-memory
situation and getting applications crashes due to
the OOM reaper or kernel panics with ath10k, please
use the "kmod-ath10k-ct-smallbuffers" package from
now on.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
4 years agoipq806x: remove CONFIG_MDIO_IPQ8064 symbol
Christian Lamparter [Sat, 21 Dec 2019 16:39:19 +0000 (17:39 +0100)]
ipq806x: remove CONFIG_MDIO_IPQ8064 symbol

This driver is not available on upstream.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
4 years agofstools: update to latest Git HEAD
Jo-Philipp Wich [Sun, 5 Jan 2020 17:40:22 +0000 (18:40 +0100)]
fstools: update to latest Git HEAD

823faa0 block: re-discover mtd devices on extroot mount retry

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
4 years agoprocd: update to version 2020-01-04
Petr Štetiar [Wed, 1 Jan 2020 11:43:45 +0000 (12:43 +0100)]
procd: update to version 2020-01-04

a5af33ce9a16 instance: strdup string attributes
d2e8bf6ef7cf system: watchdog_set: fix misleading indentation
9814807bd71c system: sysupgrade: fix possibly misleading error
c7a2db3c1eb6 system: sysupgrade: rework firmware validation
ea45c4a0f07c system: fix failing image validation due to EINTR
4fde95506243 cmake: fix lookup of external libraries

Signed-off-by: Petr Štetiar <ynezz@true.cz>
4 years agobase-files: sysupgrade: exit if the firmware download failed
Petr Štetiar [Tue, 31 Dec 2019 09:34:29 +0000 (10:34 +0100)]
base-files: sysupgrade: exit if the firmware download failed

Sysupgrade process shouldn't continue if the firmware image couldn't be
downloaded.

Ref: http://lists.infradead.org/pipermail/openwrt-devel/2019-December/020940.html
Reported-by: Petr Novák <petrn@me.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
4 years agoramips: fix sysupgrade image for TP-Link RE200v1
Andreas Böhler [Sun, 5 Jan 2020 10:13:55 +0000 (11:13 +0100)]
ramips: fix sysupgrade image for TP-Link RE200v1

Images generated for the TP-Link RE200v1 cannot be updated using
sysupgrade, because a necessary call to append-metadata was missing.

Signed-off-by: Andreas Böhler <dev@aboehler.at>
4 years agokernel: bump 4.9 to 4.9.208
Hauke Mehrtens [Sat, 4 Jan 2020 23:47:25 +0000 (00:47 +0100)]
kernel: bump 4.9 to 4.9.208

Refreshed all patches.

Compile-tested on: none
Runtime-tested on: none

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: bump 4.19 to 4.19.93
Hauke Mehrtens [Sat, 4 Jan 2020 22:45:20 +0000 (23:45 +0100)]
kernel: bump 4.19 to 4.19.93

Refreshed all patches.

The patch hack-4.19/550-loop-better-discard-for-block-devices.patch was
replaced with an new version of the patch from:
https://lore.kernel.org/patchwork/patch/1153625/
https://lore.kernel.org/patchwork/patch/1153626/

Compile-tested on: ipq40xx, lantiq
Runtime-tested on: ipq40xx, lantiq

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: bump 4.14 to 4.14.162
Hauke Mehrtens [Sat, 4 Jan 2020 22:52:01 +0000 (23:52 +0100)]
kernel: bump 4.14 to 4.14.162

Refreshed all patches.

Compile-tested on: ramips
Runtime-tested on: ramips

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agoramips: add support for Edimax RA21S
Maksym Medvedev [Fri, 15 Nov 2019 22:21:22 +0000 (23:21 +0100)]
ramips: add support for Edimax RA21S

Edimax RA21S is a dual band 11ac router,
based on MediaTek MT7621A and MT7615N chips.

Specification:
- SoC: MediaTek MT7621A dual-core @ 880MHz
- RAM: 256M (Nanya NT5CC128M16IP)
- FLASH: 16MB (Macronix MX25L12835F)
- WiFi: 2.4/5 GHz 4T4R
  - 2.4GHz MediaTek MT7615N bgn
  - 5GHz MediaTek MT7615N nac
- Switch: SoC integrated Gigabit Switch (4 x LAN, 1 x WAN)
- USB: No
- BTN: Reset, WPS
- LED: 4 red LEDs, indistinguishable when case closed
- UART:  through-hole on PCB.
   J1: 3.3V - RX - GND - TX / 57600-8N1.  3.3V is the square pad

Installation:
Update the factory image via the OEM web-interface
(by default: http://192.168.2.1/)
User: admin
Password: 1234

The sysupgrade image can be installed via TFTP
from the U-Boot bootloader. Connect via ethernet port 2.

Tested on device by @UAb5eSMn

Signed-off-by: Maksym Medvedev <redrathnure@gmail.com>
[split DTS and take over improvements from RG21S, extend commit
message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agogeneric: fix compiler error in OpenWrt's kexec patch
Daniel Golle [Sat, 4 Jan 2020 09:47:50 +0000 (11:47 +0200)]
generic: fix compiler error in OpenWrt's kexec patch

330-MIPS-kexec-Accept-command-line-parameters-from-users.patch causes
problems when building with -Werror=unused-result.

arch/mips/kernel/machine_kexec.c: In function 'machine_kexec_init_argv':
arch/mips/kernel/machine_kexec.c:76:2: error: ignoring return value of 'copy_from_user', declared with attribute warn_unused_result [-Werror=unused-result]
  copy_from_user(kexec_argv_buf, buf, size);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

Fix this by handling the return value in an appropriate way.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
4 years agoiperf: Allow enabling multicast support
Florian Fainelli [Sat, 4 Jan 2020 04:29:05 +0000 (20:29 -0800)]
iperf: Allow enabling multicast support

iperf2 is useful for testing UDP over multicast, add an option to permit
the enabling/disabling of multicast support.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
4 years agokernel: bump 4.14 to 4.14.161
Hauke Mehrtens [Thu, 2 Jan 2020 19:27:55 +0000 (20:27 +0100)]
kernel: bump 4.14 to 4.14.161

Refreshed all patches.

Compile-tested on: ipq40xx, ramips
Runtime-tested on: ipq40xx

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agosunxi: Turn on CONFIG_PINCTRL_SUN4I_A10 for A20
Florian Fainelli [Fri, 3 Jan 2020 22:58:58 +0000 (14:58 -0800)]
sunxi: Turn on CONFIG_PINCTRL_SUN4I_A10 for A20

CONFIG_PINCTRL_SUN4I_A10 controls both the A10 and the A20 enablong of
the pinctrl driver, this is necessary since upstream commit
5d8d349618a9464714c07414c5888bfd9416638f ("pinctrl: sunxi: add A20
support to A10 driver") which has been included in v4.13 and onwards.

Fixes: ad2b3bf310f7 ("sunxi: Add support for kernel 4.14")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
4 years agomt76: update to the latest version
David Bauer [Fri, 3 Jan 2020 16:22:40 +0000 (17:22 +0100)]
mt76: update to the latest version

38f4c57 mt76: mt76x0: fix default mac address overwrite

Signed-off-by: David Bauer <mail@david-bauer.net>
4 years agoramips: fix inverted reset button for Ravpower WD03
Moritz Warning [Tue, 3 Dec 2019 22:36:13 +0000 (23:36 +0100)]
ramips: fix inverted reset button for Ravpower WD03

The button events "pressed" and "released" were switched. Tested with v18.06.4.

Signed-off-by: Moritz Warning <moritzwarning@web.de>
4 years agoramips: move set-irq-affinity script to mt7621 subtarget
DENG Qingfang [Fri, 13 Dec 2019 16:24:39 +0000 (00:24 +0800)]
ramips: move set-irq-affinity script to mt7621 subtarget

Move the set-irq-affinity script to mt7621 because it is the only
SMP subtarget.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agolantiq: use shared code for LED migration
Adrian Schmutzler [Tue, 17 Dec 2019 00:30:22 +0000 (01:30 +0100)]
lantiq: use shared code for LED migration

Shared base-files package contains functions for LED migration that
are already used by several targets. Apply those also to lantiq and
drop the (redundant) local code.

While at it, reorder board names in file.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agolantiq: remove includes of non-existent /lib/functions/lantiq.sh
Adrian Schmutzler [Tue, 17 Dec 2019 16:50:58 +0000 (17:50 +0100)]
lantiq: remove includes of non-existent /lib/functions/lantiq.sh

lantiq.sh is still included in files which do not use it anymore.
Remove the includes.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agosamsung: add subtarget condition for device
Adrian Schmutzler [Sat, 28 Dec 2019 15:08:38 +0000 (16:08 +0100)]
samsung: add subtarget condition for device

The only device in samsung target is meant to be built with s5pv210
subtarget. Thus, though this won't make a difference for a
one-subtarget target, already add the condition to the Makefile to
make the assignment obvious.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agosamsung: use soc_vendor_model scheme for DTS file name
Adrian Schmutzler [Sat, 28 Dec 2019 15:04:48 +0000 (16:04 +0100)]
samsung: use soc_vendor_model scheme for DTS file name

This patch changes the samsung target to calculate the DTS file name
from vendor and device name and the SOC (i.e. subtarget) following
the common scheme:

soc_vendor_model.dts

This also updates the device definition name to make compatible,
image name, menuconfig name and DTS name consistent.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoscripts/arm-magic.sh: switch to /bin/sh
Rosen Penev [Wed, 1 Jan 2020 02:07:05 +0000 (18:07 -0800)]
scripts/arm-magic.sh: switch to /bin/sh

This does not use any special bash stuff.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
4 years agoscripts/env: replace -a and -o with &&/||
Rosen Penev [Wed, 1 Jan 2020 02:01:43 +0000 (18:01 -0800)]
scripts/env: replace -a and -o with &&/||

The former are not well defined.

Found with shellcheck.

Signed-off-by: Rosen Penev <rosenp@gmail.com>