Daniel Vetter [Thu, 10 Nov 2016 07:06:47 +0000 (08:06 +0100)]
Merge tag 'for-kvmgt' of git://git./virt/kvm/kvm into drm-intel-next-queued
Paulo Bonzini writes:
The three KVM patches that KVMGT needs.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Chris Wilson [Tue, 8 Nov 2016 14:37:19 +0000 (14:37 +0000)]
drm/i915: Spin until breadcrumb threads are complete
When we need to reset the global seqno on wraparound, we have to wait
until the current rbtrees are drained (or otherwise the next waiter will
be out of sequence). The current mechanism to kick and spin until
complete, may exit too early as it would break if the target thread was
currently running. Instead, we must wake up the threads, but keep
spinning until the trees have been deleted.
In order to appease Tvrtko, busy spin rather than yield().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108143719.32215-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Maarten Lankhorst [Tue, 8 Nov 2016 12:55:41 +0000 (13:55 +0100)]
drm/i915: Pass atomic state to verify_connector_state
This gets rid of a warning that the connectors are used without locking
when doing a nonblocking modeset.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-11-git-send-email-maarten.lankhorst@linux.intel.com
Maarten Lankhorst [Tue, 8 Nov 2016 12:55:40 +0000 (13:55 +0100)]
drm/i915: Update atomic modeset state synchronously, v2.
All of this state should be updated as soon as possible. It shouldn't be
done later because then future updates may not depend on it.
Changes since v1:
- Move the modeset update to before drm_atomic_state_get. (Ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-10-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Maarten Lankhorst [Tue, 8 Nov 2016 12:55:39 +0000 (13:55 +0100)]
drm/edid: Remove drm_select_eld
The only user was i915, which is now gone.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@redhat.com> #irc
Cc: dri-devel@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-9-git-send-email-maarten.lankhorst@linux.intel.com
Maarten Lankhorst [Tue, 8 Nov 2016 12:55:38 +0000 (13:55 +0100)]
drm/i915: Pass atomic state to intel_audio_codec_enable, v2.
drm_select_eld requires mode_config.mutex and connection_mutex
because it looks at the connector list and at the legacy encoders.
This is not required, because when we call audio_codec_enable we know
which connector it was called for, so pass the state.
This also removes having to look at crtc->config.
Changes since v1:
- Use intel_crtc->pipe instead of drm_crtc_index. (Ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-8-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Maarten Lankhorst [Tue, 8 Nov 2016 12:55:37 +0000 (13:55 +0100)]
drm/i915: Convert intel_hdmi to use atomic state
This is the last connector still looking at crtc->config. Fix this.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-7-git-send-email-maarten.lankhorst@linux.intel.com
Arnd Bergmann [Tue, 8 Nov 2016 13:58:17 +0000 (14:58 +0100)]
drm/i915: avoid harmless empty-body warning
The newly added assert_kernel_context_is_current introduces a warning
when built with W=1:
drivers/gpu/drm/i915/i915_gem.c: In function ‘assert_kernel_context_is_current’:
drivers/gpu/drm/i915/i915_gem.c:4417:63: error: suggest braces around empty body in an ‘else’ statement [-Werror=empty-body]
Changing the GEM_BUG_ON() macro from an empty definition to "do { } while (0)"
makes the macro more robust to use and avoids the warning.
Fixes: 3033acab07f9 ("drm/i915: Queue the idling context switch after all other timelines")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108135834.2166677-1-arnd@arndb.de
Daniel Vetter [Tue, 8 Nov 2016 16:24:05 +0000 (17:24 +0100)]
Merge tag 'gvt-next-2016-11-07' of https://github.com/01org/gvt-linux into drm-intel-next-queued
gvt-next-2016-11-07
- Fix regression from
e95433c73a11
- Some MMIO handler fixes
- Add better handling for guest reset control
- stratch page table tree for shadow ppgtt
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Ville Syrjälä [Mon, 7 Nov 2016 20:20:57 +0000 (22:20 +0200)]
drm/i915: Use intel_fb_gtt_offset() also for gen2/3 primary plane
The code to determine the primary plane offset for gen2/3 looks
different than the code for gen4+, but in fact it's doing the same
thing. Let's make it uniform. Allows us to eliminate the 'obj' from
the list of local variables as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-6-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 7 Nov 2016 20:20:56 +0000 (22:20 +0200)]
drm/i915: Fix error handling for cursor/sprite plane create failure
intel_cursor_plane_create() and intel_sprite_plane_create() return
an error pointer, so let's not mistakenly look for a NULL pointer.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
References: https://lists.freedesktop.org/archives/intel-gfx/2016-November/110690.html
Fixes: b079bd17e301 ("drm/i915: Bail if plane/crtc init fails")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 7 Nov 2016 20:20:55 +0000 (22:20 +0200)]
drm/i915: Grab the rotation from the passed plane state for VLV sprites
Use the passed in plane_state instead of plane->state in
vlv_update_plane(). Currently the two are one and the same, but if we
start queuing up multiple plane updates they might not be.
Looks like this was rebase fail on my part.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 8d0deca8c6e0 ("drm/i915: Pass 90/270 vs. 0/180 rotation info for intel_gen4_compute_page_offset()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Sun, 6 Nov 2016 12:59:59 +0000 (12:59 +0000)]
drm/i915: Remove chipset flush after cache flush
We always flush the chipset prior to executing with the GPU, so we can
skip the flush during ordinary domain management.
This should help mitigate some of the potential performance regressions,
but likely trivial, from doing the flush unconditionally before execbuf
introduced in commit
dcd79934b0dd ("drm/i915: Unconditionally flush any
chipset buffers before execbuf")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161106130001.9509-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Joonas Lahtinen [Tue, 8 Nov 2016 07:11:48 +0000 (09:11 +0200)]
drm/i915: Remove two sloppy inline functions from .h
Get rid of sloppy inline functions now that we don't have more users:
i915_gem_request_get_seqno
i915_gem_request_get_engine
v2:
- request->engine is always non-NULL (Chris)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478589108-3702-1-git-send-email-joonas.lahtinen@linux.intel.com
Daniel Vetter [Tue, 8 Nov 2016 06:51:35 +0000 (07:51 +0100)]
drm/i915: Update DRIVER_DATE to
20161108
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 7 Nov 2016 16:52:04 +0000 (16:52 +0000)]
drm/i915: Mark CPU cache as dirty when used for rendering
On LLC, or even snooped, machines rendering via the GPU ends up in the CPU
cache. This cacheline dirt also needs to be flushed to main memory when
moving to an incoherent domain, such as the display's scanout engine.
Mostly, this happens because either the object is marked as dirty from
its first use or is avoided by setting the object into the display
domain from the start.
v2: Treat WT as not requiring a clflush prior to use on the display
engine as well.
Fixes: 0f71979ab7fb ("drm/i915: Performed deferred clflush inside set-cache-level")
References: https://bugs.freedesktop.org/show_bug.cgi?id=95414
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107165204.7008-1-chris@chris-wilson.co.uk
Imre Deak [Mon, 7 Nov 2016 09:20:05 +0000 (11:20 +0200)]
drm/i915: Add assert for no pending GPU requests during suspend/resume in LR mode
During resume we will reset the SW/HW tracking for each ring head/tail
pointers and so are not prepared to replay any pending requests (as
opposed to GPU reset time). Add an assert for this both to the suspend
and the resume code.
v2:
- Check for ELSP port idle already during suspend and check !gt.awake
during resume. (Chris)
v3:
- Move the !gt.awake check to i915_gem_resume().
v4:
- s/intel_lr_engines_idle/intel_execlists_idle/ (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-4-git-send-email-imre.deak@intel.com
Imre Deak [Mon, 7 Nov 2016 09:20:04 +0000 (11:20 +0200)]
drm/i915: Make sure engines are idle during GPU idling in LR mode
We assume that the GPU is idle once receiving the seqno via the last
request's user interrupt. In execlist mode the corresponding context
completed interrupt can be delayed though and until this latter
interrupt arrives we consider the request to be pending on the ELSP
submit port. This can cause a problem during system suspend where this
last request will be seen by the resume code as still pending. Such
pending requests are normally replayed after a GPU reset, but during
resume we reset both SW and HW tracking of the ring head/tail pointers,
so replaying the pending request with its stale tail pointer will leave
the ring in an inconsistent state. A subsequent request submission can
lead then to the GPU executing from uninitialized area in the ring
behind the above stale tail pointer.
Fix this by making sure any pending request on the ELSP port is
completed before suspending. I used a polling wait since the completion
time I measured was <1ms and since normally we only need to wait during
system suspend. GPU idling during runtime suspend is scheduled with a
delay (currently 50-100ms) after the retirement of the last request at
which point the context completed interrupt must have arrived already.
The chance of this bug was increased by
commit
1c777c5d1dcdf8fa0223fcff35fb387b5bb9517a
Author: Imre Deak <imre.deak@intel.com>
Date: Wed Oct 12 17:46:37 2016 +0300
drm/i915/hsw: Fix GPU hang during resume from S3-devices state
but it could happen even without the explicit GPU reset, since we
disable interrupts afterwards during the suspend sequence.
v2:
- Do an unlocked poll-wait first. (Chris)
v3-4:
- s/intel_lr_engines_idle/intel_execlists_idle/ and move
i915.enable_execlists check to the new helper. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98470
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-3-git-send-email-imre.deak@intel.com
Imre Deak [Mon, 7 Nov 2016 09:20:03 +0000 (11:20 +0200)]
drm/i915: Avoid early GPU idling due to race with new request
There is a small race where a new request can be submitted and retired
after the idle worker started to run which leads to idling the GPU too
early. Fix this by deferring the idling to the pending instance of the
worker.
This scenario was pointed out by Chris.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-2-git-send-email-imre.deak@intel.com
Imre Deak [Mon, 7 Nov 2016 09:20:02 +0000 (11:20 +0200)]
drm/i915: Avoid early GPU idling due to already pending idle work
Atm, in case an idle work handler is already pending but haven't yet
started to run, retiring a new request will not extend the active period
as required, rather simply leaves the pending idle work to be scheduled
at the original expiration time. This may lead to idling the GPU too
early. Fix this by using the delayed-work scheduler alternative which
makes sure the handler's expiration time is extended in this case.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Requested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-1-git-send-email-imre.deak@intel.com
Chris Wilson [Mon, 7 Nov 2016 11:01:28 +0000 (11:01 +0000)]
drm/i915: Limit Valleyview and earlier to only using mappable scanout
Valleyview appears to be limited to only scanning out from the first 512MiB
of the Global GTT. Lets presume that this behaviour was inherited from the
display block copied from g4x (not Ironlake) and all earlier generations
are similarly affected, though testing suggests different symptoms. For
simplicity, impose that these platforms must scanout from the mappable
region. (For extra simplicity, use HAS_GMCH_DISPLAY even though this
catches Cherryview which does not appear to be limited to the low
aperture for its scanout.)
v2: Use HAS_GMCH_DISPLAY() to more clearly convey my intent about
limiting this workaround to the old style of display engine.
v3: Update changelog to reflect testing by Ville Syrjälä
v4: Include the changes to the comments as well
Reported-by: Luis Botello <luis.botello.ortega@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98036
Fixes: 2efb813d5388 ("drm/i915: Fallback to using unmappable memory for scanout")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107110128.28762-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com
Chris Wilson [Mon, 7 Nov 2016 10:54:43 +0000 (10:54 +0000)]
drm/i915: Round tile chunks up for constructing partial VMAs
When we split a large object up into chunks for GTT faulting (because we
can't fit the whole object into the aperture) we have to align our cuts
with the fence registers. Each partial VMA must cover a complete set of
tile rows or the offset into each partial VMA is not aligned with the
whole image. Currently we enforce a minimum size on each partial VMA,
but this minimum size itself was not aligned to the tile row causing
distortion.
Reported-by: Andreas Reis <andreas.reis@gmail.com>
Reported-by: Chris Clayton <chris2553@googlemail.com>
Reported-by: Norbert Preining <preining@logic.at>
Tested-by: Norbert Preining <preining@logic.at>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Fixes: 03af84fe7f48 ("drm/i915: Choose partial chunksize based on tile row size")
Fixes: a61007a83a46 ("drm/i915: Fix partial GGTT faulting") # enabling patch
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98402
Testcase: igt/gem_mmap_gtt/medium-copy-odd
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107105443.27855-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Fri, 4 Nov 2016 16:12:41 +0000 (16:12 +0000)]
drm/i915: Remove the vma from the object list upon close
Currently, the vma is being unlink from the object lookup on destroy.
However, we are meant to be decoupling it upon close so that the user
cannot access the closed vma whilst it remains active on the GPU.
[ 34.074858] kernel BUG at drivers/gpu/drm/i915/i915_gem_gtt.c:3561!
[ 34.074875] invalid opcode: 0000 [#1] PREEMPT SMP
[ 34.074888] Modules linked in: snd_hda_intel i915 x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel lpc_ich mei_me mei snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_codec snd_hwdep snd_hda_core i2c_designware_platform i2c_designware_core snd_pcm e1000e ptp pps_core sdhci_acpi sdhci mmc_core i2c_hid [last unloaded: i915]
[ 34.075010] CPU: 1 PID: 6224 Comm: gem_close_race Tainted: G U 4.9.0-rc3-CI-CI_DRM_1800+ #1
[ 34.075034] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0355.2016.0224.1501 02/24/2016
[ 34.075057] task:
ffff8802459a8040 task.stack:
ffffc90000524000
[ 34.075074] RIP: 0010:[<
ffffffffa0392cbc>] [<
ffffffffa0392cbc>] i915_gem_obj_lookup_or_create_vma+0x8c/0xc0 [i915]
[ 34.075118] RSP: 0018:
ffffc90000527b68 EFLAGS:
00010202
[ 34.075135] RAX:
ffff8802426c5e40 RBX:
0000000000000000 RCX:
ffff8802447fc2a8
[ 34.075158] RDX:
0000000000000000 RSI:
ffff8802447fc2a8 RDI:
ffff880248a4a880
[ 34.075181] RBP:
ffffc90000527b88 R08:
0000000000000008 R09:
0000000000000000
[ 34.075203] R10:
0000000000000001 R11:
0000000000000000 R12:
ffff880248a4a880
[ 34.075225] R13:
ffff8802447fc2a8 R14:
ffff880243e9afa8 R15:
ffff880248a4a9c8
[ 34.075248] FS:
00007f9b43e59740(0000) GS:
ffff880256c80000(0000) knlGS:
0000000000000000
[ 34.075273] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 34.075292] CR2:
00007f9b43419140 CR3:
000000024455d000 CR4:
00000000003406e0
[ 34.075314] Stack:
[ 34.075323]
0000000000000000 ffffc90000527bd0 ffff880243cb8008 ffff880243e9afa8
[ 34.075353]
ffffc90000527c08 ffffffffa03874c7 ffffc90000527bb8 ffff880243e9afa8
[ 34.075383]
ffff880243e9afb0 ffffc90000527e10 ffff8802447fc2a8 ffff880243cb8040
[ 34.075414] Call Trace:
[ 34.075435] [<
ffffffffa03874c7>] eb_lookup_vmas.isra.7+0x247/0x330 [i915]
[ 34.075468] [<
ffffffffa0388c34>] i915_gem_do_execbuffer.isra.15+0x604/0x1a10 [i915]
[ 34.075507] [<
ffffffffa039c957>] ? i915_gem_object_get_sg+0x347/0x380 [i915]
[ 34.075532] [<
ffffffff811a69ce>] ? __might_fault+0x3e/0x90
[ 34.075562] [<
ffffffffa038a430>] i915_gem_execbuffer2+0xc0/0x250 [i915]
[ 34.075585] [<
ffffffff81552926>] drm_ioctl+0x1f6/0x480
[ 34.075604] [<
ffffffff8100107a>] ? trace_hardirqs_on_thunk+0x1a/0x1c
[ 34.075635] [<
ffffffffa038a370>] ? i915_gem_execbuffer+0x330/0x330 [i915]
[ 34.075658] [<
ffffffff81202d2e>] do_vfs_ioctl+0x8e/0x690
[ 34.075677] [<
ffffffff8181582d>] ? _raw_spin_unlock_irqrestore+0x3d/0x60
[ 34.075700] [<
ffffffff810fcd51>] ? SyS_timer_settime+0x141/0x1e0
[ 34.075721] [<
ffffffff810d6de2>] ? trace_hardirqs_on_caller+0x122/0x1b0
[ 34.075742] [<
ffffffff8120336c>] SyS_ioctl+0x3c/0x70
[ 34.075760] [<
ffffffff8181602e>] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 34.075781] Code: 44 a0 48 c7 c2 9a 7e 43 a0 be e0 0d 00 00 48 c7 c7 a0 45 44 a0 e8 55 b8 ce e0 48 85 db 74 a3 49 83 bd f8 03 00 00 00 74 99 0f 0b <0f> 0b 48 89 da 4c 89 ee 4c 89 e7 e8 04 a9 ff ff 48 89 da 49 89
[ 34.075955] RIP [<
ffffffffa0392cbc>] i915_gem_obj_lookup_or_create_vma+0x8c/0xc0 [i915]
[ 34.075994] RSP <
ffffc90000527b68>
Testcase: igt/gem_close_race/basic-threads
Fixes: db6c2b4151f2 ("drm/i915: Store the vma in an rbtree...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161104161241.25871-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Ping Gao [Fri, 4 Nov 2016 05:47:35 +0000 (13:47 +0800)]
drm/i915/gvt: implement scratch page table tree for shadow PPGTT
All the unused entries in the page table tree(PML4E->PDPE->PDE->PTE)
should point to scratch page table/scratch page to avoid page walk error
due to the page prefetching.
When removing an entry in shadow PPGTT, it need map to scratch page
also, the older implementation use single scratch page to assign to all
level entries, it doesn't align the page walk behavior when removed
entry is in PML, PDP, PD. To avoid potential page walk error this patch
implement a scratch page tree to replace the single scratch page.
v2: more details in commit message address Kevin's comments.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Du, Changbin [Fri, 4 Nov 2016 04:21:37 +0000 (12:21 +0800)]
drm/i915/gvt: emulate vgpu engine reset control behavior
When SW wishes to reset the render engine, it will program
engine's reset control register and wait response from HW.
We need emulate the behavior of this register so guest i915
driver could walk through the engine reset flow. The registers
are not emulated in gvt yet, this patch add the emulation
logic.
v2: add more desc info in commit message.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Zhenyu Wang [Wed, 2 Nov 2016 07:00:15 +0000 (15:00 +0800)]
drm/i915/gvt: Fix workload status after wait
From commit
e95433c73a11759203af1cae5958f998c9673370, workload status setting
was changed to only capture on error path, but we need to set it properly in
normal path too, otherwise we'll fail to complete workload which could lead
guest VM vGPU reset.
v2: uses braces and add Fixes tag.
Fixes: e95433c73a11 ("drm/i915: Rearrange i915_wait_request() accounting with callers")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Ping Gao [Fri, 28 Oct 2016 02:21:45 +0000 (10:21 +0800)]
drm/i915/gvt: update misc ctl regs base on stepping info
Misc ctl related registers are for WA purpose, should detect the
stepping info first before updating HW value.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Ping Gao [Thu, 27 Oct 2016 06:37:41 +0000 (14:37 +0800)]
drm/i915/gvt: correct the emulation in TLB control handler
Need a explicit write_vreg in TLB MMIO write handler, beside that
TLB vreg should update correspondingly following HW status to do
correct emulation.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Ping Gao [Thu, 27 Oct 2016 06:46:40 +0000 (14:46 +0800)]
drm/i915/gvt: add write vreg in MMIO DMA_CTRL handler
Missing write_vreg in DMA_CTRL write handler would make obsolete
value return when read vreg.
v2: get data from vreg after updating it.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Ping Gao [Thu, 27 Oct 2016 01:54:22 +0000 (09:54 +0800)]
drm/i915/gvt: remove unused variable 'execlist'
Remove the variable 'execlist' as it's unused in function
vgpu_has_pending_workload.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Zhenyu Wang [Thu, 27 Oct 2016 09:30:13 +0000 (17:30 +0800)]
drm/i915/gvt: Fix shift for cmd data size
This is to fix smatch warning on
drivers/gpu/drm/i915/gvt/cmd_parser.c:1421 cmd_handler_mi_op_2f()
warn: shift has higher precedence than mask
We need bits 20-19 mask for data size.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Lyude [Wed, 2 Nov 2016 01:06:30 +0000 (21:06 -0400)]
drm/i915: Reinit polling before hpd when resuming
Now that we don't run the connector reprobing from i915_drm_resume(), we
need to make it so we don't have to wait for reprobing to finish so that
we actually speed things up. In order to do this, we need to make sure
that i915_drm_resume() doesn't get blocked by i915_hpd_poll_init_work()
while trying to acquire the mode_config lock that
drm_kms_helper_poll_enable() needs to acquire.
The easiest way to do this is to just enable polling before hpd. This
shouldn't break anything since at that point we have everything else we
need for polling enabled.
As well, this should result in a rather significant improvement in how
quickly we can resume the system.
Signed-off-by: Lyude <lyude@redhat.com>
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Testcase: analyze_suspend.py -config config/suspend-callgraph.cfg -filter i915
Lyude [Tue, 1 Nov 2016 21:31:32 +0000 (17:31 -0400)]
drm/i915: Remove redundant reprobe in i915_drm_resume
Weine's investigation on benchmarking the suspend/resume process pointed
out a lot of the time in suspend/resume is being spent reprobing. While
the reprobing process is a lengthy one for good reason, we don't need to
hold up the entire suspend/resume process while we wait for it to
finish. Luckily as it turns out, we already trigger a full connector
reprobe in i915_hpd_poll_init_work(), so we can just ditch reprobing in
i915_drm_resume() entirely.
This won't lead to less time spent resuming just yet since now the
bottleneck will be waiting for the mode_config lock in
drm_kms_helper_poll_enable(), since that will be held as long as
i915_hpd_poll_init_work() is reprobing all of the connectors. But we'll
address that in the next patch.
Signed-off-by: Lyude <lyude@redhat.com>
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Testcase: analyze_suspend.py -config config/suspend-callgraph.cfg -filter i915
Dhinakaran Pandiyan [Wed, 2 Nov 2016 20:13:21 +0000 (13:13 -0700)]
drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms
According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.
Let's apply this work around to GEN9 platforms too, as it fixes the same
issue.
v2: Move drm_device to drm_i915_private conversion
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907
Cc: stable@vger.kernel.org
Cc: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478117601-19122-1-git-send-email-dhinakaran.pandiyan@intel.com
Dhinakaran Pandiyan [Tue, 1 Nov 2016 18:47:59 +0000 (11:47 -0700)]
drm/i915/dp: BDW cdclk fix for DP audio
According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.
From BSpec:
"Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)]
Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio
enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may
be audio corruption or screen corruption."
Since, some DP configurations (e.g., MST) use port width x4 and HBR2
link rate, let's increase the cdclk to >= 432 MHz to enable audio for those
cases.
v4: Changed commit message
v3: Combine BDW pixel rate adjustments into a function (Jani)
v2: Restrict fix to BDW
Retain the set cdclk across modesets (Ville)
Cc: stable@vger.kernel.org
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478026080-2925-1-git-send-email-dhinakaran.pandiyan@intel.com
Chris Wilson [Fri, 4 Nov 2016 10:30:01 +0000 (10:30 +0000)]
drm/i915: Fix pages pin counting around swizzle quirk
commit
bc0629a76726 ("drm/i915: Track pages pinned due to swizzling
quirk") fixed one problem, but revealed a whole lot more. The root cause
of the pin count mismatch for the swizzle quirk (for L-shaped memory on
gen3/4) was that we were incrementing the pages_pin_count upon getting
the backing pages but then overwriting the pages_pin_count to set it to
1 afterwards. With a little bit of adjustment to satisfy the GEM_BUG_ON
sanitychecks, the fix is to replace the explicit atomic_set with an
atomic_inc.
v2: Consistently use atomics (not mix atomics and helpers) within the
lowlevel get_pages routines. This makes the atomic operations much
clearer.
Fixes: 1233e2db199d ("drm/i915: Move object backing storage manipulation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161104103001.27643-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Jike Song [Tue, 25 Oct 2016 07:50:43 +0000 (15:50 +0800)]
kvm/page_track: export symbols for external usage
Signed-off-by: Jike Song <jike.song@intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jike Song [Tue, 25 Oct 2016 07:50:42 +0000 (15:50 +0800)]
kvm/page_track: call notifiers with kvm_page_track_notifier_node
The user of page_track might needs extra information, so pass
the kvm_page_track_notifier_node to callbacks.
Signed-off-by: Jike Song <jike.song@intel.com>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Xiaoguang Chen [Sun, 9 Oct 2016 07:41:44 +0000 (15:41 +0800)]
KVM: x86: add track_flush_slot page track notifier
When a memory slot is being moved or removed users of page track
can be notified. So users can drop write-protection for the pages
in that memory slot.
This notifier type is needed by KVMGT to sync up its shadow page
table when memory slot is being moved or removed.
Register the notifier type track_flush_slot to receive memslot move
and remove event.
Reviewed-by: Xiao Guangrong <guangrong.xiao@intel.com>
Signed-off-by: Chen Xiaoguang <xiaoguang.chen@intel.com>
[Squashed commits to avoid bisection breakage and reworded the subject.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Chris Wilson [Thu, 3 Nov 2016 20:08:52 +0000 (20:08 +0000)]
drm/i915: Fix test on inputs for vma_compare()
When supplying a view to vma_compare() it is required that the supplied
i915_address_space is the global GTT. I tested the VMA instead (which is
the current position in the rbtree and maybe from any address space).
Reported-by: Matthew Auld <matthew.auld@intel.com>
Tested-by: Matthew Auld <matthew.auld@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98579
Fixes: db6c2b4151f2 ("drm/i915: Store the vma in an rbtree...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161103200852.23431-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Chris Wilson [Wed, 2 Nov 2016 17:50:47 +0000 (17:50 +0000)]
drm/i915/guc: Cache the client mapping
Use i915_gem_object_pin_map() for the guc client's lifetime to replace
the peristent kmap + frequent kmap_atomic with a permanent vmapping.
This avoids taking the obj->mm.lock mutex whilst inside irq context
later.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98571
Fixes: 96d776345277 ("drm/i915: Use a radixtree for random access...");
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161102175051.29163-9-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tvrtko Ursulin [Wed, 2 Nov 2016 15:14:59 +0000 (15:14 +0000)]
drm/i915: Tidy slab cache allocations
We can use the preferred KMEM_CACHE helper for brevity.
Also simplifiy error unwind by only setting the ENOMEM
error code once.
v2: Add forgotten changes. (Joonas Lahtinen)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v1)
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478099699-28652-1-git-send-email-tvrtko.ursulin@linux.intel.com
Joonas Lahtinen [Thu, 3 Nov 2016 08:39:46 +0000 (10:39 +0200)]
drm/i915: Introduce HAS_64BIT_RELOC
Move has_64bit_reloc into dev_priv->info. This will make it visible
in the feature listing debug output.
v2:
- Keep the struct member to keep GCC fragile but happy (Chris)
v3:
- More detailed commit message (Chris)
- Include forgotten CHV and BXT (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478162386-5018-1-git-send-email-joonas.lahtinen@linux.intel.com
Owen Hofmann [Thu, 27 Oct 2016 18:25:52 +0000 (11:25 -0700)]
kvm: x86: Check memopp before dereference (CVE-2016-8630)
Commit
41061cdb98 ("KVM: emulate: do not initialize memopp") removes a
check for non-NULL under incorrect assumptions. An undefined instruction
with a ModR/M byte with Mod=0 and R/M-5 (e.g. 0xc7 0x15) will attempt
to dereference a null pointer here.
Fixes: 41061cdb98a0bec464278b4db8e894a3121671f5
Message-Id: <
1477592752-126650-2-git-send-email-osh@google.com>
Signed-off-by: Owen Hofmann <osh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Fri, 28 Oct 2016 15:29:39 +0000 (08:29 -0700)]
kvm: nVMX: VMCLEAR an active shadow VMCS after last use
After a successful VM-entry with the "VMCS shadowing" VM-execution
control set, the shadow VMCS referenced by the VMCS link pointer field
in the current VMCS becomes active on the logical processor.
A VMCS that is made active on more than one logical processor may become
corrupted. Therefore, before an active VMCS can be migrated to another
logical processor, the first logical processor must execute a VMCLEAR
for the active VMCS. VMCLEAR both ensures that all VMCS data are written
to memory and makes the VMCS inactive.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-By: David Matlack <dmatlack@google.com>
Message-Id: <
1477668579-22555-1-git-send-email-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 31 Oct 2016 23:39:48 +0000 (00:39 +0100)]
KVM: x86: drop TSC offsetting kvm_x86_ops to fix KVM_GET/SET_CLOCK
Since commit
a545ab6a0085 ("kvm: x86: add tsc_offset field to struct
kvm_vcpu_arch", 2016-09-07) the offset between host and L1 TSC is
cached and need not be fished out of the VMCS or VMCB. This means
that we can implement adjust_tsc_offset_guest and read_l1_tsc
entirely in generic code. The simplification is particularly
significant for VMX code, where vmx->nested.vmcs01_tsc_offset
was duplicating what is now in vcpu->arch.tsc_offset. Therefore
the vmcs01_tsc_offset can be dropped completely.
More importantly, this fixes KVM_GET_CLOCK/KVM_SET_CLOCK
which, after commit
108b249c453d ("KVM: x86: introduce get_kvmclock_ns",
2016-09-01) called read_l1_tsc while the VMCS was not loaded.
It thus returned bogus values on Intel CPUs.
Fixes: 108b249c453dd7132599ab6dc7e435a7036c193f
Reported-by: Roman Kagan <rkagan@virtuozzo.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Chris Wilson [Thu, 27 Oct 2016 00:03:43 +0000 (01:03 +0100)]
drm/i915: Show the execlist queue in debugfs/i915_engine_info
When looking at freezes whilst working on execlists, knowing the order
of the pending requests in the driver is useful.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161027000348.4641-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Joonas Lahtinen [Wed, 2 Nov 2016 10:16:04 +0000 (12:16 +0200)]
drm/i915: Unify global_list into global_link
$ sed -i -r 's/\bglobal_list\b/global_link/g' *.c *.h
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478081764-8058-1-git-send-email-joonas.lahtinen@linux.intel.com
Mika Kuoppala [Tue, 1 Nov 2016 16:43:03 +0000 (18:43 +0200)]
drm/i915: Move hangcheck code out from i915_irq.c
Create new file for hangcheck specific code, intel_hangcheck.c,
and move all related code in it.
v2: s/intel_engine_hangcheck/intel_engine (Chris)
No functional changes.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478018583-5816-1-git-send-email-mika.kuoppala@intel.com
Mika Kuoppala [Mon, 31 Oct 2016 15:24:46 +0000 (17:24 +0200)]
drm/i915/gtt: Mark tlbs dirty on clear
Now when clearing ptes can modify upper level pdp's,
we need to mark them dirty so that they will be flushed
correctly.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478006856-8313-1-git-send-email-mika.kuoppala@intel.com
Mika Kuoppala [Tue, 1 Nov 2016 13:27:36 +0000 (15:27 +0200)]
drm/i915/gtt: Fix pte clear range
Comparing pte index to a number of entries is wrong
when clearing a range of pte entries. Use end marker
of 'one past' to correctly point adequate number of
ptes to the scratch page.
v2: assert early instead of warning late (Chris)
v3: removed consts (Joonas)
Fixes: d209b9c3cd28 ("drm/i915/gtt: Split gen8_ppgtt_clear_pte_range")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98282
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Ander Conselvan de Oliveira [Wed, 2 Nov 2016 06:44:56 +0000 (08:44 +0200)]
drm/i915/bxt: Don't set OCL2_LDOFUSE_PWR_DIS bit in phy init sequence
Hardware engineers confirmed that writing to it has no effect, as implied
by the FIXME comment.
v2: Also remove comment from bxt_ddi_phy_verify_state(). (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478069096-11209-1-git-send-email-ander.conselvan.de.oliveira@intel.com
Tvrtko Ursulin [Tue, 1 Nov 2016 14:44:10 +0000 (14:44 +0000)]
drm/i915: Allow shrinking of userptr objects once again
Commit
1bec9b0bda3d ("drm/i915/shrinker: Only shmemfs objects
are backed by swap") stopped considering the userptr objects
in shrinker callbacks.
Restore that so idle userptr objects can be discarded in order
to free up memory.
One change further to what was introduced in
1bec9b0bda3d is
to start considering userptr objects in oom but that should
also be a correct thing to do.
v2: Introduce I915_GEM_OBJECT_IS_SHRINKABLE. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 1bec9b0bda3d ("drm/i915/shrinker: Only shmemfs objects are backed by swap")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: <stable@vger.kernel.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478011450-6634-1-git-send-email-tvrtko.ursulin@linux.intel.com
Ville Syrjälä [Mon, 31 Oct 2016 20:37:25 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to intel_init_pm()
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-27-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:24 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to ilk_setup_wm_latency() & co.
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-26-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:23 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to intel_suspend_hw()
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-25-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:22 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to init_clock_gating
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-24-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:21 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to single_enabled_crtc()
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-23-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:20 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to rest of IS_FOO() macros for the old platforms
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-22-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:19 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to IS_BROADWATER/IS_CRESTLINE
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-21-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:18 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to HAS_FW_BLC
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-20-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:17 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to .get_fifo_size()
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-19-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:16 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to i915_pineview_get_mem_freq() and i915_ironlake_get_mem_freq()
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-18-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:15 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to IS_PINEVIEW()
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-17-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:14 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to IS_MOBILE()
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-16-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:13 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to .get_display_clock_speed()
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-15-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:12 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to cdclk update funcs
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-14-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:11 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to intel_crtc_init()
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-13-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:10 +0000 (22:37 +0200)]
drm/i915: Always use intel_get_crtc_for_pipe()
Replace the open coded dev_priv->pipe_to_crtc_mapping[] usage with
intel_get_crtc_for_pipe().
Mostly done with coccinelle, with a few manual tweaks
@@
expression E1, E2;
@@
(
- E1->pipe_to_crtc_mapping[E2]
+ intel_get_crtc_for_pipe(E1, E2)
|
- E1->plane_to_crtc_mapping[E2]
+ intel_get_crtc_for_plane(E1, E2)
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-12-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:09 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to intel_get_crtc_for_pipe()
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-11-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:08 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to g4x wm functions
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-10-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:07 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to vlv force pll functions
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-9-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:06 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to intel_wait_for_vblank()
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-8-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:05 +0000 (22:37 +0200)]
drm/i915: Store struct intel_crtc * in {pipe,plane}_to_crtc_mapping[]
A lot of users of the {pipe,plane}_to_crtc_mapping[] will end up
casting the result to intel_crtc, so let's just store the intel_crtc
pointer in the first place.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-7-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:04 +0000 (22:37 +0200)]
drm/i915: Use struct intel_crtc in legacy platform wm code
Unify our approach to things by using intel_crtc instead of drm_crtc.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-6-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:03 +0000 (22:37 +0200)]
drm/i915: Pass intel_crtc to update_wm functions
Unify our approach to things by passing around intel_crtc instead of
drm_crtc.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:02 +0000 (22:37 +0200)]
drm/i915: Pass intel_crtc to intel_crtc_active()
Unify our approach to things by passing around intel_crtc instead of
drm_crtc.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:01 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to skl_init_scalers()
Unify our approach to things by passing around dev_priv instead of dev.
While at it let's do some house cleaning: s/intel_foo/foo/ and move
things into tighter scope.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Ville Syrjälä [Mon, 31 Oct 2016 20:37:00 +0000 (22:37 +0200)]
drm/i915: Pass dev_priv to plane constructors
Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Sun, 30 Oct 2016 13:28:20 +0000 (13:28 +0000)]
drm/i915: Export a function to flush the context upon pinning
For legacy contexts we employ an optimisation to only flush the context
when binding into the global GTT. This avoids stalling on the GPU when
reloading an active context. Wrap this detail up into a helper and
export it for a potential third user. (Longer term, context pinning
needs to be reworked as the current handling of switch context pins too
late and so risks eviction and corrupting the request. Plans, plans,
plans.)
v2: Expand the comment explaining the optimisation for avoiding the
stall on active contexts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161030132820.32163-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Maarten Lankhorst [Wed, 26 Oct 2016 13:41:36 +0000 (15:41 +0200)]
drm/i915/gen9+: Use the watermarks from crtc_state for everything, v2.
There's no need to keep a duplicate skl_pipe_wm around any more,
everything can be discovered from crtc_state, which we pass around
correctly now even in case of plane disable.
The copy in intel_crtc->wm.skl.active is equal to
crtc_state->wm.skl.optimal after the atomic commit completes.
It's useful for two-step watermark programming, but not required for
gen9+ which does it in a single step. We can pull the old allocation
from old_crtc_state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-9-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Maarten Lankhorst [Wed, 26 Oct 2016 13:41:34 +0000 (15:41 +0200)]
drm/i915/skl+: Clean up minimum allocations, v2.
Move calculating minimum allocations to a helper, which cleans up the
code some more. The cursor is still allocated in advance because it
doesn't count towards data rate and should always be reserved.
changes since v1:
- Change comment to have a extra opening line. (Matt)
- Rebase to remove unused plane->pipe == pipe, handled by the iterator
now. (Paulo)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-7-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Maarten Lankhorst [Wed, 26 Oct 2016 13:41:33 +0000 (15:41 +0200)]
drm/i915/skl+: Remove minimum block allocation from crtc state.
This is not required any more now that we get fresh state from
drm_atomic_crtc_state_for_each_plane_state. Zero all state
in advance.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-6-git-send-email-maarten.lankhorst@linux.intel.com
Maarten Lankhorst [Wed, 26 Oct 2016 13:41:32 +0000 (15:41 +0200)]
drm/i915/skl+: Remove data_rate from watermark struct, v2.
It's only used in one function, and can be calculated without caching it
in the global struct by using drm_atomic_crtc_state_for_each_plane_state.
There are loops over all planes, including planes that don't exist.
This is harmless, because data_rate will always be 0 for them and we
never program them when updating watermarks.
Changes since v1:
- Rename rate back to data_rate, and change array name to
plane_data_rate. (Matt)
- Remove whitespace. (Paulo)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-5-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Maarten Lankhorst [Tue, 1 Nov 2016 11:04:10 +0000 (12:04 +0100)]
drm/i915/gen9+: Use for_each_intel_plane_on_crtc in skl_print_wm_changes, v2.
Using for_each_intel_plane_on_crtc will allow us to find all allocations
that may have changed, not just the one added by the atomic state.
This will print changes to plane allocations for crtc's when some
planes are not added to the atomic state.
Changes since v1:
- Rephrase commit message. (Ville)
- Use plane->base.id and plane->name to kill off cursor special
case. (Ville)
- Add intel_crtc to prevent a line wrap. (Paulo)
- Line wrap debug messages.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/c9f7dc1a-d23a-7c16-b2b7-1c23dd07ed35@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Maarten Lankhorst [Wed, 26 Oct 2016 13:41:30 +0000 (15:41 +0200)]
drm/i915/gen9+: Use cstate plane mask instead of crtc->state.
I'm planning on getting rid of all obj->state dereferences,
and replace thhem with accessor functions.
Remove this one early, they're equivalent because removed
planes are already part of the state, else they could not
have been removed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-3-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Maarten Lankhorst [Wed, 26 Oct 2016 13:41:29 +0000 (15:41 +0200)]
drm/i915/skl+: Prepare for removing data rate from skl watermark state, v2.
Caching is not required, drm_atomic_crtc_state_for_each_plane_state can
be used to inspect the states of all planes assigned to the CRTC even
if they are not part of _state, so we can just recalculate every time.
Changes since v1:
- Remove plane->pipe checks, they're implied by the macros.
- Split unrelated changes to a separate commit.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-2-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Chris Wilson [Tue, 1 Nov 2016 12:11:34 +0000 (12:11 +0000)]
drm/i915: Improve lockdep tracking for obj->mm.lock
The shrinker may appear to recurse into obj->mm.lock as the shrinker may
be called from a direct reclaim path whilst handling get_pages. We
filter out recursing on the same obj->mm.lock by inspecting
obj->mm.pages, but we do want to take the lock on a second object in
order to reap their pages. lockdep spots the recursion on the same
lockclass and needs annotation to avoid a false positive. To keep the
two paths distinct, create an enum to indicate which subclass of
obj->mm.lock we are using. This removes the false positive and avoids
masking real bugs.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161101121134.27504-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Tue, 1 Nov 2016 11:54:00 +0000 (11:54 +0000)]
drm/i915: Store the vma in an rbtree under the object
With full-ppgtt one of the main bottlenecks is the lookup of the VMA
underneath the object. For execbuf there is merit in having a very fast
direct lookup of ctx:handle to the vma using a hashtree, but that still
leaves a large number of other lookups. One way to speed up the lookup
would be to use a rhashtable, but that requires extra allocations and
may exhibit poor worse case behaviour. An alternative is to use an
embedded rbtree, i.e. no extra allocations and deterministic behaviour,
but at the slight cost of O(lgN) lookups (instead of O(1) for
rhashtable). The major of such tree will be very shallow and so not much
slower, and still scales much, much better than the current unsorted
list.
v2: Bump vma_compare() to return a long, as we return the result of
comparing two pointers.
References: https://bugs.freedesktop.org/show_bug.cgi?id=87726
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161101115400.15647-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 1 Nov 2016 10:03:17 +0000 (10:03 +0000)]
drm/i915: Track pages pinned due to swizzling quirk
If we have a tiled object and an unknown CPU swizzle pattern, we pin the
pages to prevent the object from being swapped out (and us corrupting
the contents as we do not know the access pattern and so cannot convert
it to linear and back to tiled on reuse). This requires us to remember
to drop the extra pinning when freeing the object, or else we trigger
warnings about the pin leak. In commit
fbbd37b36fa5 ("drm/i915: Move
object release to a freelist + worker"), the object free path was
deferred to a worker, but the unpinning of the quirk, along with marking
the object as reclaimable, was left on the immediate path (so that if
required we could reclaim the pages under memory pressure as early as
possible). However, this split introduced a bug where the pages were no
longer being unpinned if they were marked as unneeded.
[ 231.800401] WARNING: CPU: 1 PID: 90 at drivers/gpu/drm/i915/i915_gem.c:4275 __i915_gem_free_objects+0x326/0x3c0 [i915]
[ 231.800403] WARN_ON(i915_gem_object_has_pinned_pages(obj))
[ 231.800405] Modules linked in:
[ 231.800406] snd_hda_intel i915 snd_hda_codec_generic mei_me snd_hda_codec coretemp snd_hwdep mei lpc_ich snd_hda_core snd_pcm e1000e ptp pps_core [last unloaded: i915]
[ 231.800426] CPU: 1 PID: 90 Comm: kworker/1:4 Tainted: G U 4.9.0-rc2-CI-CI_DRM_1780+ #1
[ 231.800428] Hardware name: LENOVO 7465CTO/7465CTO, BIOS 6DET44WW (2.08 ) 04/22/2009
[ 231.800456] Workqueue: events __i915_gem_free_work [i915]
[ 231.800459]
ffffc9000034fc80 ffffffff8142dd65 ffffc9000034fcd0 0000000000000000
[ 231.800465]
ffffc9000034fcc0 ffffffff8107e4e6 000010b300000001 0000000000001000
[ 231.800469]
ffff88011d3db740 ffff880130ef0000 0000000000000000 ffff880130ef5ea0
[ 231.800474] Call Trace:
[ 231.800479] [<
ffffffff8142dd65>] dump_stack+0x67/0x92
[ 231.800484] [<
ffffffff8107e4e6>] __warn+0xc6/0xe0
[ 231.800487] [<
ffffffff8107e54a>] warn_slowpath_fmt+0x4a/0x50
[ 231.800491] [<
ffffffff811d12ac>] ? kmem_cache_free+0x2dc/0x340
[ 231.800520] [<
ffffffffa009ef36>] __i915_gem_free_objects+0x326/0x3c0 [i915]
[ 231.800548] [<
ffffffffa009effe>] __i915_gem_free_work+0x2e/0x50 [i915]
[ 231.800552] [<
ffffffff8109c27c>] process_one_work+0x1ec/0x6b0
[ 231.800555] [<
ffffffff8109c1f6>] ? process_one_work+0x166/0x6b0
[ 231.800558] [<
ffffffff8109c789>] worker_thread+0x49/0x490
[ 231.800561] [<
ffffffff8109c740>] ? process_one_work+0x6b0/0x6b0
[ 231.800563] [<
ffffffff8109c740>] ? process_one_work+0x6b0/0x6b0
[ 231.800566] [<
ffffffff810a2aab>] kthread+0xeb/0x110
[ 231.800569] [<
ffffffff810a29c0>] ? kthread_park+0x60/0x60
[ 231.800573] [<
ffffffff818164a7>] ret_from_fork+0x27/0x40
Moving to a separate flag for tracking the quirked pin is overkill for
the bug (since we only have to interchange the two tests in
i915_gem_free_object) but it does reduce a complicated test on all
objects and provide a sanitycheck for uncommon code paths.
Fixes: fbbd37b36fa5 ("drm/i915: Move object release to a freelist + worker")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161101100317.11129-2-chris@chris-wilson.co.uk
Chris Wilson [Tue, 1 Nov 2016 10:03:16 +0000 (10:03 +0000)]
drm/i915: Avoid accessing request->timeline outside of its lifetime
Whilst waiting on a request, we may do so without holding any locks or
any guards beyond a reference to the request. In order to avoid taking
locks within request deallocation, we drop references to its timeline
(via the context and ppgtt) upon retirement. We should avoid chasing
such pointers outside of their control, in particular we inspect the
request->timeline to see if we may restore the RPS waitboost for a
client. If we instead look at the engine->timeline, we will have similar
behaviour on both full-ppgtt and !full-ppgtt systems and reduce the
amount of reward we give towards stalling clients (i.e. only if the
client stalls and the GPU is uncontended does it reclaim its boost).
This restores behaviour back to pre-timelines, whilst fixing:
[ 645.078485] BUG: KASAN: use-after-free in i915_gem_object_wait_fence+0x1ee/0x2e0 at addr
ffff8802335643a0
[ 645.078577] Read of size 4 by task gem_exec_schedu/28408
[ 645.078638] CPU: 1 PID: 28408 Comm: gem_exec_schedu Not tainted 4.9.0-rc2+ #64
[ 645.078724] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015
[ 645.078816]
ffff88022daef9a0 ffffffff8143d059 ffff880235402a80 ffff880233564200
[ 645.078998]
ffff88022daef9c8 ffffffff81229c5c ffff88022daefa48 ffff880233564200
[ 645.079172]
ffff880235402a80 ffff88022daefa38 ffffffff81229ef0 000000008110a796
[ 645.079345] Call Trace:
[ 645.079404] [<
ffffffff8143d059>] dump_stack+0x68/0x9f
[ 645.079467] [<
ffffffff81229c5c>] kasan_object_err+0x1c/0x70
[ 645.079534] [<
ffffffff81229ef0>] kasan_report_error+0x1f0/0x4b0
[ 645.079601] [<
ffffffff8122a244>] kasan_report+0x34/0x40
[ 645.079676] [<
ffffffff81634f5e>] ? i915_gem_object_wait_fence+0x1ee/0x2e0
[ 645.079741] [<
ffffffff81229951>] __asan_load4+0x61/0x80
[ 645.079807] [<
ffffffff81634f5e>] i915_gem_object_wait_fence+0x1ee/0x2e0
[ 645.079876] [<
ffffffff816364bf>] i915_gem_object_wait+0x19f/0x590
[ 645.079944] [<
ffffffff81636320>] ? i915_gem_object_wait_priority+0x500/0x500
[ 645.080016] [<
ffffffff8110fb30>] ? debug_show_all_locks+0x1e0/0x1e0
[ 645.080084] [<
ffffffff8110abdc>] ? check_chain_key+0x14c/0x210
[ 645.080157] [<
ffffffff8110a796>] ? __lock_is_held+0x46/0xc0
[ 645.080226] [<
ffffffff8163bc61>] ? i915_gem_set_domain_ioctl+0x141/0x690
[ 645.080296] [<
ffffffff8163bcc2>] i915_gem_set_domain_ioctl+0x1a2/0x690
[ 645.080366] [<
ffffffff811f8f85>] ? __might_fault+0x75/0xe0
[ 645.080433] [<
ffffffff815a55f7>] drm_ioctl+0x327/0x640
[ 645.080508] [<
ffffffff8163bb20>] ? i915_gem_obj_prepare_shmem_write+0x3a0/0x3a0
[ 645.080603] [<
ffffffff815a52d0>] ? drm_ioctl_permit+0x120/0x120
[ 645.080670] [<
ffffffff8110abdc>] ? check_chain_key+0x14c/0x210
[ 645.080738] [<
ffffffff81275717>] do_vfs_ioctl+0x127/0xa20
[ 645.080804] [<
ffffffff8120268c>] ? do_mmap+0x47c/0x580
[ 645.080871] [<
ffffffff811da567>] ? vm_mmap_pgoff+0x117/0x140
[ 645.080938] [<
ffffffff812755f0>] ? ioctl_preallocate+0x150/0x150
[ 645.081011] [<
ffffffff81108c53>] ? up_write+0x23/0x50
[ 645.081078] [<
ffffffff811da567>] ? vm_mmap_pgoff+0x117/0x140
[ 645.081145] [<
ffffffff811da450>] ? vma_is_stack_for_current+0x90/0x90
[ 645.081214] [<
ffffffff8110d853>] ? mark_held_locks+0x23/0xc0
[ 645.082030] [<
ffffffff81288408>] ? __fget+0x168/0x250
[ 645.082106] [<
ffffffff819ad517>] ? entry_SYSCALL_64_fastpath+0x5/0xb1
[ 645.082176] [<
ffffffff81288592>] ? __fget_light+0xa2/0xc0
[ 645.082242] [<
ffffffff8127604c>] SyS_ioctl+0x3c/0x70
[ 645.082309] [<
ffffffff819ad52e>] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 645.082374] Object at
ffff880233564200, in cache kmalloc-8192 size: 8192
[ 645.082431] Allocated:
[ 645.082480] PID = 28408
[ 645.082535] [ 645.082566] [<
ffffffff8103ae66>] save_stack_trace+0x16/0x20
[ 645.082623] [ 645.082656] [<
ffffffff81228b06>] save_stack+0x46/0xd0
[ 645.082716] [ 645.082756] [<
ffffffff812292fd>] kasan_kmalloc+0xad/0xe0
[ 645.082817] [ 645.082848] [<
ffffffff81631752>] i915_ppgtt_create+0x52/0x220
[ 645.082908] [ 645.082941] [<
ffffffff8161db96>] i915_gem_create_context+0x396/0x560
[ 645.083027] [ 645.083059] [<
ffffffff8161f857>] i915_gem_context_create_ioctl+0x97/0xf0
[ 645.083152] [ 645.083183] [<
ffffffff815a55f7>] drm_ioctl+0x327/0x640
[ 645.083243] [ 645.083274] [<
ffffffff81275717>] do_vfs_ioctl+0x127/0xa20
[ 645.083334] [ 645.083372] [<
ffffffff8127604c>] SyS_ioctl+0x3c/0x70
[ 645.083432] [ 645.083464] [<
ffffffff819ad52e>] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 645.083551] Freed:
[ 645.083599] PID = 27629
[ 645.083648] [ 645.083676] [<
ffffffff8103ae66>] save_stack_trace+0x16/0x20
[ 645.083738] [ 645.083770] [<
ffffffff81228b06>] save_stack+0x46/0xd0
[ 645.083830] [ 645.083862] [<
ffffffff81229203>] kasan_slab_free+0x73/0xc0
[ 645.083922] [ 645.083961] [<
ffffffff812279c9>] kfree+0xa9/0x170
[ 645.084021] [ 645.084053] [<
ffffffff81629f60>] i915_ppgtt_release+0x100/0x180
[ 645.084139] [ 645.084171] [<
ffffffff8161d414>] i915_gem_context_free+0x1b4/0x230
[ 645.084257] [ 645.084288] [<
ffffffff816537b2>] intel_lr_context_unpin+0x192/0x230
[ 645.084380] [ 645.084413] [<
ffffffff81645250>] i915_gem_request_retire+0x620/0x630
[ 645.084500] [ 645.085226] [<
ffffffff816473d1>] i915_gem_retire_requests+0x181/0x280
[ 645.085313] [ 645.085352] [<
ffffffff816352ba>] i915_gem_retire_work_handler+0xca/0xe0
[ 645.085440] [ 645.085471] [<
ffffffff810c725b>] process_one_work+0x4fb/0x920
[ 645.085532] [ 645.085562] [<
ffffffff810c770d>] worker_thread+0x8d/0x840
[ 645.085622] [ 645.085653] [<
ffffffff810d21e5>] kthread+0x185/0x1b0
[ 645.085718] [ 645.085750] [<
ffffffff819ad7a7>] ret_from_fork+0x27/0x40
[ 645.085811] Memory state around the buggy address:
[ 645.085869]
ffff880233564280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 645.085956]
ffff880233564300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 645.086053] >
ffff880233564380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 645.086138] ^
[ 645.086193]
ffff880233564400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 645.086283]
ffff880233564480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
v2: Add a comment to document the hint like nature of
intel_engine_last_submit()
Fixes: 73cb97010d4f ("drm/i915: Combine seqno + tracking into a global timeline struct")
Fixes: 80b204bce8f2 ("drm/i915: Enable multiple timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161101100317.11129-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 1 Nov 2016 08:48:43 +0000 (08:48 +0000)]
drm/i915: Move the recently scanned objects to the tail after shrinking
During shrinking, we walk over the list of objects searching for
victims. Any that are not removed are put back into the global list.
Currently, they are put back in order (at the front) which means they
will be first to be scanned again. If we instead move them to the rear
of the list, we will scan new potential victims on the next pass and
waste less time rescanning unshrinkable objects. Normally the lists are
kept in rough order to shrinking (with object least frequently used at
the start), by moving just scanned objects to the rear we are
acknowledging that they are still in use.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161101084843.3961-3-chris@chris-wilson.co.uk
Chris Wilson [Tue, 1 Nov 2016 08:48:42 +0000 (08:48 +0000)]
drm/i915: Discard objects from mm global_list after being shrunk
In the shrinker, we can safely remove an empty object (obj->mm.pages ==
NULL) after having discarded the pages because we are holding the
struct_mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161101084843.3961-2-chris@chris-wilson.co.uk
Chris Wilson [Tue, 1 Nov 2016 08:48:41 +0000 (08:48 +0000)]
drm/i915: Use the full hammer when shutting down the rcu tasks
To flush all call_rcu() tasks (here from i915_gem_free_object()) we need
to call rcu_barrier() (not synchronize_rcu()). If we don't then we may
still have objects being freed as we continue to teardown the driver -
in particular, the recently released rings may race with the memory
manager shutdown resulting in sporadic:
[ 142.217186] WARNING: CPU: 7 PID: 6185 at drivers/gpu/drm/drm_mm.c:932 drm_mm_takedown+0x2e/0x40
[ 142.217187] Memory manager not clean during takedown.
[ 142.217187] Modules linked in: i915(-) x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel lpc_ich snd_hda_codec_realtek snd_hda_codec_generic mei_me mei snd_hda_codec_hdmi snd_hda_codec snd_hwdep snd_hda_core snd_pcm e1000e ptp pps_core [last unloaded: snd_hda_intel]
[ 142.217199] CPU: 7 PID: 6185 Comm: rmmod Not tainted 4.9.0-rc2-CI-Trybot_242+ #1
[ 142.217199] Hardware name: LENOVO 10AGS00601/SHARKBAY, BIOS FBKT34AUS 04/24/2013
[ 142.217200]
ffffc90002ecfce0 ffffffff8142dd65 ffffc90002ecfd30 0000000000000000
[ 142.217202]
ffffc90002ecfd20 ffffffff8107e4e6 000003a40778c2a8 ffff880401355c48
[ 142.217204]
ffff88040778c2a8 ffffffffa040f3c0 ffffffffa040f4a0 00005621fbf8b1f0
[ 142.217206] Call Trace:
[ 142.217209] [<
ffffffff8142dd65>] dump_stack+0x67/0x92
[ 142.217211] [<
ffffffff8107e4e6>] __warn+0xc6/0xe0
[ 142.217213] [<
ffffffff8107e54a>] warn_slowpath_fmt+0x4a/0x50
[ 142.217214] [<
ffffffff81559e3e>] drm_mm_takedown+0x2e/0x40
[ 142.217236] [<
ffffffffa035c02a>] i915_gem_cleanup_stolen+0x1a/0x20 [i915]
[ 142.217246] [<
ffffffffa034c581>] i915_ggtt_cleanup_hw+0x31/0xb0 [i915]
[ 142.217253] [<
ffffffffa0310311>] i915_driver_cleanup_hw+0x31/0x40 [i915]
[ 142.217260] [<
ffffffffa0312001>] i915_driver_unload+0x141/0x1a0 [i915]
[ 142.217268] [<
ffffffffa031c2c4>] i915_pci_remove+0x14/0x20 [i915]
[ 142.217269] [<
ffffffff8147d214>] pci_device_remove+0x34/0xb0
[ 142.217271] [<
ffffffff8157b14c>] __device_release_driver+0x9c/0x150
[ 142.217272] [<
ffffffff8157bcc6>] driver_detach+0xb6/0xc0
[ 142.217273] [<
ffffffff8157abe3>] bus_remove_driver+0x53/0xd0
[ 142.217274] [<
ffffffff8157c787>] driver_unregister+0x27/0x50
[ 142.217276] [<
ffffffff8147c265>] pci_unregister_driver+0x25/0x70
[ 142.217287] [<
ffffffffa03d764c>] i915_exit+0x1a/0x71 [i915]
[ 142.217289] [<
ffffffff811136b3>] SyS_delete_module+0x193/0x1e0
[ 142.217291] [<
ffffffff818174ae>] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 142.217292] ---[ end trace
6fd164859c154772 ]---
[ 142.217505] [drm:show_leaks] *ERROR* node [
6b6b6b6b6b6b6b6b +
6b6b6b6b6b6b6b6b]: inserted at
[<
ffffffff81559ff3>] save_stack.isra.1+0x53/0xa0
[<
ffffffff8155a98d>] drm_mm_insert_node_in_range_generic+0x2ad/0x360
[<
ffffffffa035bf23>] i915_gem_stolen_insert_node_in_range+0x93/0xe0 [i915]
[<
ffffffffa035c855>] i915_gem_object_create_stolen+0x75/0xb0 [i915]
[<
ffffffffa036a51a>] intel_engine_create_ring+0x9a/0x140 [i915]
[<
ffffffffa036a921>] intel_init_ring_buffer+0xf1/0x440 [i915]
[<
ffffffffa036be1b>] intel_init_render_ring_buffer+0xab/0x1b0 [i915]
[<
ffffffffa0363d08>] intel_engines_init+0xc8/0x210 [i915]
[<
ffffffffa0355d7c>] i915_gem_init+0xac/0xf0 [i915]
[<
ffffffffa0311454>] i915_driver_load+0x9c4/0x1430 [i915]
[<
ffffffffa031c2f8>] i915_pci_probe+0x28/0x40 [i915]
[<
ffffffff8147d315>] pci_device_probe+0x85/0xf0
[<
ffffffff8157b7ff>] driver_probe_device+0x21f/0x430
[<
ffffffff8157baee>] __driver_attach+0xde/0xe0
In particular note that the node was being poisoned as we inspected the
list, a clear indication that the object is being freed as we make the
assertion.
v2: Don't loop, just assert that we do all the work required as that
will be better at detecting further errors.
Fixes: fbbd37b36fa5 ("drm/i915: Move object release to a freelist + worker")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161101084843.3961-1-chris@chris-wilson.co.uk
Ville Syrjälä [Tue, 25 Oct 2016 15:58:03 +0000 (18:58 +0300)]
drm/i915: Reorganize sprite init
Kill the switch statement from the sprite init code and replace with a
more straightforward if ladder. Now each significant evolution of the
sprite hardware is in its own neat box.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477411083-19255-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 25 Oct 2016 15:58:02 +0000 (18:58 +0300)]
drm/i915: Bail if plane/crtc init fails
Due to the plane->index not getting readjusted in drm_plane_cleanup(),
we can't continue initialization of some plane/crtc init fails.
Well, we sort of could I suppose if we left all initialized planes on
the list, but that would expose those planes to userspace as well.
But for crtcs the situation is even worse since we assume that
pipe==crtc index occasionally, so we can't really deal with a partially
initialize set of crtcs.
So seems safest to just abort the entire thing if anything goes wrong.
All the failure paths here are kmalloc()s anyway, so it seems unlikely
we'd get very far if these start failing.
v2: Add (enum plane) case to silence gcc
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477411083-19255-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 25 Oct 2016 15:58:01 +0000 (18:58 +0300)]
drm/i915: Initialize planes in a reasonable order
The zpos magic sorting uses the object ID to solve conflicting zpos
values. Let's initialize our planes in an order that makes the object
IDs agree with the normal primary->sprites->cursor z order.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477411083-19255-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 25 Oct 2016 15:58:00 +0000 (18:58 +0300)]
drm/i915: Don't try to initialize sprite planes on pre-ilk
We don't currently implement support for sprite planes on pre-ilk
platforms, so let's leave num_sprites at 0 so that we don't get
spurious errors during driver init.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477411083-19255-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Mon, 31 Oct 2016 12:40:48 +0000 (12:40 +0000)]
drm/i915: Mark up obj->mm.lock for shrinker
As we may allocate from within the obj->mm.lock we may enter the
shrinker for direct reclaim. Operating on the current object is
prevented by checking for obj->mm.pages (which is only set as the last
operation in the allocation path). However, we need to identify the
single recursion of accessing another object's obj->mm.lock as the two
locks have identical class and so appear to be the same to lockdep,
convincing it that a deadlock is possible. Use mutex_lock_nested() to
remove the false positive.
[ 2165.945734] =================================
[ 2165.945749] [ INFO: inconsistent lock state ]
[ 2165.945765] 4.9.0-rc2+ #2 Tainted: G W
[ 2165.945781] ---------------------------------
[ 2165.945796] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
[ 2165.945816] kswapd0/62 [HC0[0]:SC0[0]:HE1:SE1] takes: (&obj->mm.lock){+.+.?.}, at: [<
ffffffffc0289a1f>] i915_gem_shrink+0x29f/0x500 [i915]
[ 2165.945904] {RECLAIM_FS-ON-W} state was registered at:
[ 2165.945931] [<
ffffffffb10bd50f>] mark_held_locks+0x6f/0xa0
[ 2165.945956] [<
ffffffffb10bf889>] lockdep_trace_alloc+0x69/0xc0
[ 2165.945982] [<
ffffffffb11eea53>] kmem_cache_alloc_trace+0x33/0x2a0
[ 2165.946019] [<
ffffffffc028a28a>] i915_gem_object_get_pages_stolen+0x6a/0xd0 [i915]
[ 2165.946060] [<
ffffffffc027e1d0>] ____i915_gem_object_get_pages+0x20/0x60 [i915]
[ 2165.946098] [<
ffffffffc027e268>] __i915_gem_object_get_pages+0x58/0x70 [i915]
[ 2165.946138] [<
ffffffffc028a3dc>] _i915_gem_object_create_stolen+0xec/0x120 [i915]
[ 2165.946177] [<
ffffffffc028af73>] i915_gem_object_create_stolen_for_preallocated+0xf3/0x3f0 [i915]
[ 2165.946222] [<
ffffffffc02bae43>] intel_alloc_initial_plane_obj.isra.125+0xd3/0x200 [i915]
[ 2165.946266] [<
ffffffffc02cb1c1>] intel_modeset_init+0x931/0x1530 [i915]
[ 2165.946301] [<
ffffffffc023d584>] i915_driver_load+0xa14/0x14a0 [i915]
[ 2165.946335] [<
ffffffffc0248aff>] i915_pci_probe+0x4f/0x70 [i915]
[ 2165.946362] [<
ffffffffb13cc452>] local_pci_probe+0x42/0xa0
[ 2165.946386] [<
ffffffffb13cd903>] pci_device_probe+0x103/0x150
[ 2165.946411] [<
ffffffffb14adeb3>] driver_probe_device+0x223/0x430
[ 2165.946436] [<
ffffffffb14ae1a3>] __driver_attach+0xe3/0xf0
[ 2165.946461] [<
ffffffffb14ab943>] bus_for_each_dev+0x73/0xc0
[ 2165.946485] [<
ffffffffb14ad5ee>] driver_attach+0x1e/0x20
[ 2165.946508] [<
ffffffffb14ad003>] bus_add_driver+0x173/0x270
[ 2165.946533] [<
ffffffffb14aee70>] driver_register+0x60/0xe0
[ 2165.946557] [<
ffffffffb13cbd6d>] __pci_register_driver+0x5d/0x60
[ 2165.946606] [<
ffffffffc0378057>] soundcore_open+0x17/0x230 [soundcore]
[ 2165.946636] [<
ffffffffb1000450>] do_one_initcall+0x50/0x180
[ 2165.946661] [<
ffffffffb117fd2d>] do_init_module+0x5f/0x1f1
[ 2165.946685] [<
ffffffffb1108964>] load_module+0x2174/0x2a80
[ 2165.946709] [<
ffffffffb11094df>] SYSC_finit_module+0xdf/0x110
[ 2165.946734] [<
ffffffffb110952e>] SyS_finit_module+0xe/0x10
[ 2165.946758] [<
ffffffffb1742aea>] entry_SYSCALL_64_fastpath+0x18/0xad
[ 2165.946776] irq event stamp: 90871
[ 2165.946788] hardirqs last enabled at (90871):
[ 2165.946805] [<
ffffffffb173e9da>] __mutex_unlock_slowpath+0x11a/0x1c0
[ 2165.946823] hardirqs last disabled at (90870):
[ 2165.946839] [<
ffffffffb173e91b>] __mutex_unlock_slowpath+0x5b/0x1c0
[ 2165.946856] softirqs last enabled at (90858):
[ 2165.946872] [<
ffffffffb174581a>] __do_softirq+0x39a/0x4c6
[ 2165.946887] softirqs last disabled at (90671):
[ 2165.946902] [<
ffffffffb1066cea>] irq_exit+0xea/0xf0
[ 2165.946916] other info that might help us debug this:
[ 2165.946936] Possible unsafe locking scenario:
[ 2165.946955] CPU0
[ 2165.946965] ----
[ 2165.946975] lock(&obj->mm.lock);
[ 2165.947000] <Interrupt>
[ 2165.947010] lock(&obj->mm.lock);
[ 2165.947035] *** DEADLOCK ***
[ 2165.947054] 2 locks held by kswapd0/62:
[ 2165.947067] #0: (shrinker_rwsem){++++..}, at: [<
ffffffffb119a20e>] shrink_slab.part.40+0x5e/0x5d0
[ 2165.947120] #1: (&dev->struct_mutex){+.+.+.}, at: [<
ffffffffc028954b>] i915_gem_shrinker_lock+0x1b/0x60 [i915]
[ 2165.948909] stack backtrace:
[ 2165.950650] CPU: 2 PID: 62 Comm: kswapd0 Tainted: G W 4.9.0-rc2+ #2
[ 2165.951587] Hardware name: LENOVO 80MX/Lenovo E31-80, BIOS DCCN34WW(V2.03) 12/01/2015
[ 2165.952484]
ffffc90000b5f8c8 ffffffffb137f645 ffff88016c5a2700 ffffffffb25f20a0
[ 2165.953395]
ffffc90000b5f918 ffffffffb10bcecd 0000000000000000 ffff880100000001
[ 2165.954305]
0000000000000001 000000000000000a ffff88016c5a2fd0 ffff88016c5a2700
[ 2165.955240] Call Trace:
[ 2165.956170] [<
ffffffffb137f645>] dump_stack+0x68/0x93
[ 2165.957071] [<
ffffffffb10bcecd>] print_usage_bug+0x1dd/0x1f0
[ 2165.957979] [<
ffffffffb10bd439>] mark_lock+0x559/0x5c0
[ 2165.958875] [<
ffffffffb10bc3f0>] ? print_shortest_lock_dependencies+0x1b0/0x1b0
[ 2165.959829] [<
ffffffffb10be04d>] __lock_acquire+0x66d/0x12a0
[ 2165.960729] [<
ffffffffb11ef541>] ? __slab_free+0xa1/0x340
[ 2165.961625] [<
ffffffffb10dba5d>] ? debug_lockdep_rcu_enabled+0x1d/0x20
[ 2165.962530] [<
ffffffffb10bd50f>] ? mark_held_locks+0x6f/0xa0
[ 2165.963457] [<
ffffffffb10bf0b0>] lock_acquire+0xf0/0x1f0
[ 2165.964368] [<
ffffffffc0289a1f>] ? i915_gem_shrink+0x29f/0x500 [i915]
[ 2165.965269] [<
ffffffffc0289a1f>] ? i915_gem_shrink+0x29f/0x500 [i915]
[ 2165.966150] [<
ffffffffb173d837>] mutex_lock_nested+0x77/0x420
[ 2165.967030] [<
ffffffffc0289a1f>] ? i915_gem_shrink+0x29f/0x500 [i915]
[ 2165.967952] [<
ffffffffc027c7a1>] ? __i915_gem_object_put_pages.part.58+0x161/0x1b0 [i915]
[ 2165.968835] [<
ffffffffc0289a1f>] i915_gem_shrink+0x29f/0x500 [i915]
[ 2165.969712] [<
ffffffffc0289e40>] i915_gem_shrinker_scan+0x70/0xb0 [i915]
[ 2165.970591] [<
ffffffffb119a3ae>] shrink_slab.part.40+0x1fe/0x5d0
[ 2165.971504] [<
ffffffffb119f19c>] shrink_node+0x22c/0x320
[ 2165.972371] [<
ffffffffb11a05fb>] kswapd+0x38b/0x9b0
[ 2165.973238] [<
ffffffffb11a0270>] ? mem_cgroup_shrink_node+0x330/0x330
[ 2165.974068] [<
ffffffffb108630f>] kthread+0xff/0x120
[ 2165.974929] [<
ffffffffb1086210>] ? kthread_park+0x60/0x60
[ 2165.975847] [<
ffffffffb1742d57>] ret_from_fork+0x27/0x40
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 1233e2db199d ("drm/i915: Move object backing storage manipulation...")
Testcase: igt/gem_ctx_create/maximum-swap
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161031124048.30355-1-chris@chris-wilson.co.uk
Jani Nikula [Wed, 26 Oct 2016 16:11:32 +0000 (19:11 +0300)]
MAINTAINERS: drop dri-devel list for i915
In practice, none of the i915 developers Cc dri-devel for strictly i915
specific patches. Make MAINTAINERS reflect reality, and reduce random
i915 specific noise on dri-devel.
Also, we have a fairly large crowd reading and responding on intel-gfx,
and we're pretty good at involving dri-devel when that is appropriate.
Cc: dri-devel@lists.freedesktop.org
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477498292-9808-1-git-send-email-jani.nikula@intel.com