git.openwrt.org Git - openwrt/staging/blogic.git/log

vhost-vsock: add pkt cancel capability

To allow canceling all packets of a connection.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vsock: track pkt owner vsock

So that we can cancel a queued pkt later if necessary.

Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

crypto: deadlock between crypto_alg_sem/rtnl_mutex/genl_mutex

On Tue, Mar 14, 2017 at 10:44:10AM +0100, Dmitry Vyukov wrote:
>
> Yes, please.
> Disregarding some reports is not a good way long term.

Please try this patch.

---8<---
Subject: netlink: Annotate nlk cb_mutex by protocol

Currently all occurences of nlk->cb_mutex are annotated by lockdep
as a single class. This causes a false lcokdep cycle involving
genl and crypto_user.

This patch fixes it by dividing cb_mutex into individual classes
based on the netlink protocol. As genl and crypto_user do not
use the same netlink protocol this breaks the false dependency
loop.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8152: fix the list rx_done may be used without initialization

The list rx_done would be initialized when the linking on occurs.
Therefore, if a napi is scheduled without any linking on before,
the following kernel panic would happen.

BUG: unable to handle kernel NULL pointer dereference at 000000000000008
IP: [<ffffffffc085efde>] r8152_poll+0xe1e/0x1210 [r8152]
PGD 0
Oops: 0002 [#1] SMP

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: tcp_get_info() should read tcp_time_stamp later

Commit b369e7fd41f7 ("tcp: make TCP_INFO more consistent") moved
lock_sock_fast() earlier in tcp_get_info()

This has the minor effect that jiffies value being sampled at the
beginning of tcp_get_info() is more likely to be off by one, and we
report big tcpi_last_data_sent values (like 0xFFFFFFFF).

Since we lock the socket, fetching tcp_time_stamp right before
doing the jiffies_to_msecs() calls is enough to remove these
wrong values.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netvsc: fix race during initialization

When device is being setup on boot, there is a small race where
network device callback is registered, but the netvsc_device pointer
is not set yet. This can cause a NULL ptr dereference if packet
arrives during this window.

Fixes: 46b4f7f5d1f7 ("netvsc: eliminate per-device outstanding send counter")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bridge: resolve a false alarm of lockdep

Andrei reported a false alarm of lockdep at net/bridge/br_fdb.c:109,
this is because in Andrei's case, a spin_bug() was already triggered
before this, therefore the debug_locks is turned off, lockdep_is_held()
is no longer accurate after that. We should use lockdep_assert_held_once()
instead of lockdep_is_held() to respect debug_locks.

Fixes: 410b3d48f5111 ("bridge: fdb: add proper lock checks in searching functions")
Reported-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rxrpc: Ignore BUSY packets on old calls

If we receive a BUSY packet for a call we think we've just completed, the
packet is handed off to the connection processor to deal with - but the
connection processor doesn't expect a BUSY packet and so flags a protocol
error.

Fix this by simply ignoring the BUSY packet for the moment.

The symptom of this may appear as a system call failing with EPROTO.  This
may be triggered by pressing ctrl-C under some circumstances.

This comes about we abort calls due to interruption by a signal (which we
shouldn't do, but that's going to be a large fix and mostly in fs/afs/).
What happens is that we abort the call and may also abort follow up calls
too (this needs offloading somehoe).  So we see a transmission of something
like the following sequence of packets:

DATA for call N
ABORT call N
DATA for call N+1
ABORT call N+1

in very quick succession on the same channel.  However, the peer may have
deferred the processing of the ABORT from the call N to a background thread
and thus sees the DATA message from the call N+1 coming in before it has
cleared the channel.  Thus it sends a BUSY packet[*].

[*] Note that some implementations (OpenAFS, for example) mark the BUSY
    packet with one plus the callNumber of the call prior to call N.
    Ordinarily, this would be call N, but there's no requirement for the
    calls on a channel to be numbered strictly sequentially (the number is
    required to increase).

    This is wrong and means that the callNumber in the BUSY packet should
    be ignored (it really ought to be N+1 since that's what it's in
    response to).

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: Free tx/rx scrq pointer array when releasing sub-crqs

The pointer array for the tx/rx sub crqs should be free'ed when
releasing the tx/rx sub crqs.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipv6: set route type for anycast routes

Anycast routes have the RTF_ANYCAST flag set, but when dumping routes
for userspace the route type is not set to RTN_ANYCAST. Make it so.

Fixes: 58c4fb86eabcb ("[IPV6]: Flag RTF_ANYCAST for anycast routes")
CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mpls: Fix nexthop alive tracking on down events

Alive tracking of nexthops can account for a link twice if the carrier
goes down followed by an admin down of the same link rendering multipath
routes useless. This is similar to 79099aab38c8 for UNREGISTER events and
DOWN events.

Fix by tracking number of alive nexthops in mpls_ifdown similar to the
logic in mpls_ifup. Checking the flags per nexthop once after all events
have been processed is simpler than trying to maintian a running count
through all event combinations.

Also, WRITE_ONCE is used instead of ACCESS_ONCE to set rt_nhn_alive
per a comment from checkpatch:
WARNING: Prefer WRITE_ONCE(<FOO>, <BAR>) over ACCESS_ONCE(<FOO>) = <BAR>

Fixes: c89359a42e2a4 ("mpls: support for dead routes")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: aquantia: set net_device mtu when mtu is changed

When the aquantia device mtu is changed the net_device structure is not
updated. As a result the ip command does not properly reflect the mtu change.

Commit 5513e16421cb incorrectly assumed that __dev_set_mtu() was making the
assignment ndev->mtu = new_mtu; This is not true in the case where the driver
has a ndo_change_mtu routine.

Fixes: 5513e16421cb ("net: ethernet: aquantia: Fixes for aq_ndev_change_mtu")
Cc: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: David Arcari <darcari@redhat.com>
Tested-by: Pavel Belous <pavel.belous@aquantia.com>
Reviewed-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx4_core: Avoid delays during VF driver device shutdown

Some Hypervisors detach VFs from VMs by instantly causing an FLR event
to be generated for a VF.

In the mlx4 case, this will cause that VF's comm channel to be disabled
before the VM has an opportunity to invoke the VF device's "shutdown"
method.

For such Hypervisors, there is a race condition between the VF's
shutdown method and its internal-error detection/reset thread.

The internal-error detection/reset thread (which runs every 5 seconds) also
detects a disabled comm channel. If the internal-error detection/reset
flow wins the race, we still get delays (while that flow tries repeatedly
to detect comm-channel recovery).

The cited commit fixed the command timeout problem when the
internal-error detection/reset flow loses the race.

This commit avoids the unneeded delays when the internal-error
detection/reset flow wins.

Fixes: d585df1c5ccf ("net/mlx4_core: Avoid command timeouts during VF driver device shutdown")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reported-by: Simon Xiao <sixiao@microsoft.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'batadv-net-for-davem-20170316' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
Here are two batman-adv bugfixes:

- Keep fragments equally sized, avoids some problems with too small fragments,
by Sven Eckelmann

- Initialize gateway class correctly when BATMAN V is compiled in,
by Sven Eckelmann
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

openvswitch: Add missing case OVS_TUNNEL_KEY_ATTR_PAD

Added a case for OVS_TUNNEL_KEY_ATTR_PAD to the switch statement
in ip_tun_from_nlattr in order to prevent the default case
returning an error.

Fixes: b46f6ded906e ("libnl: nla_put_be64(): align on a 64-bit area")
Signed-off-by: Kris Murphy <kriskend@linux.vnet.ibm.com>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

nl80211: fix dumpit error path RTNL deadlocks

Sowmini pointed out Dmitry's RTNL deadlock report to me, and it turns out
to be perfectly accurate - there are various error paths that miss unlock
of the RTNL.

To fix those, change the locking a bit to not be conditional in all those
nl80211_prepare_*_dump() functions, but make those require the RTNL to
start with, and fix the buggy error paths. This also let me use sparse
(by appropriately overriding the rtnl_lock/rtnl_unlock functions) to
validate the changes.

Cc: stable@vger.kernel.org
Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

net: properly release sk_frag.page

I mistakenly added the code to release sk->sk_frag in
sk_common_release() instead of sk_destruct()

TCP sockets using sk->sk_allocation == GFP_ATOMIC do no call
sk_common_release() at close time, thus leaking one (order-3) page.

iSCSI is using such sockets.

Fixes: 5640f7685831 ("net: use a per task frag allocator")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

amd-xgbe: Fix jumbo MTU processing on newer hardware

Newer hardware does not provide a cumulative payload length when multiple
descriptors are needed to handle the data. Once the MTU increases beyond
the size that can be handled by a single descriptor, the SKB does not get
built properly by the driver.

The driver will now calculate the size of the data buffers used by the
hardware. The first buffer of the first descriptor is for packet headers
or packet headers and data when the headers can't be split. Subsequent
descriptors in a multi-descriptor chain will not use the first buffer. The
second buffer is used by all the descriptors in the chain for payload data.
Based on whether the driver is processing the first, intermediate, or last
descriptor it can calculate the buffer usage and build the SKB properly.

Tested and verified on both old and new hardware.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bcmgenet: Do not suspend PHY if Wake-on-LAN is enabled

Suspending the PHY would be putting it in a low power state where it
may no longer allow us to do Wake-on-LAN.

Fixes: cc013fb48898 ("net: bcmgenet: correctly suspend and resume PHY device")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: remove MACVLAN and VLAN entries

macvlan.c file seems to be both in VLAN and MACVLAN DRIVER, so remove
the MACVLAN DRIVER since this is redundant.

I propose with this patch to remove the VLAN (802.1Q) entry so this just
falls into the NETWORKING [GENERAL].

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree, a
rather large batch of fixes targeted to nf_tables, conntrack and bridge
netfilter. More specifically, they are:

1) Don't track fragmented packets if the socket option IP_NODEFRAG is set.
   From Florian Westphal.

2) SCTP protocol tracker assumes that ICMP error messages contain the
   checksum field, what results in packet drops. From Ying Xue.

3) Fix inconsistent handling of AH traffic from nf_tables.

4) Fix new bitmap set representation with big endian. Fix mismatches in
   nf_tables due to incorrect big endian handling too. Both patches
   from Liping Zhang.

5) Bridge netfilter doesn't honor maximum fragment size field, cap to
   largest fragment seen. From Florian Westphal.

6) Fake conntrack entry needs to be aligned to 8 bytes since the 3 LSB
   bits are now used to store the ctinfo. From Steven Rostedt.

7) Fix element comments with the bitmap set type. Revert the flush
   field in the nft_set_iter structure, not required anymore after
   fixing up element comments.

8) Missing error on invalid conntrack direction from nft_ct, also from
   Liping Zhang.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net/openvswitch: Set the ipv6 source tunnel key address attribute correctly

When dealing with ipv6 source tunnel key address attribute
(OVS_TUNNEL_KEY_ATTR_IPV6_SRC) we are wrongly setting the tunnel
dst ip, fix that.

Fixes: 6b26ba3a7d95 ('openvswitch: netlink attributes for IPv6 tunneling')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

fjes: Fix wrong netdevice feature flags

This patch fixes netdev->features for Extended Socket network device.

Currently Extended Socket network device's netdev->feature claims
NETIF_F_HW_CSUM, however this is completely wrong. There's no feature
of checksum offloading.
That causes invalid TCP/UDP checksum and packet rejection when IP
forwarding from Extended Socket network device to other network device.

NETIF_F_HW_CSUM should be omitted.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"This is a rather large set of fixes. The bulk are for lpfc correcting
  a lot of issues in the new NVME driver code which just went in in the
  merge window.

  The others are:

   - fix a hang in the vmware paravirt driver caused by incorrect
     handling of the new MSI vector allocation

   - long standing bug in storvsc, which recent block changes turned
     from being a harmless annoyance into a hang

   - yet more fallout (in mpt3sas) from the changes to device blocking

  The remainder are small fixes and updates"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (34 commits)
  scsi: lpfc: Add shutdown method for kexec
  scsi: storvsc: Workaround for virtual DVD SCSI version
  scsi: lpfc: revise version number to 11.2.0.10
  scsi: lpfc: code cleanups in NVME initiator discovery
  scsi: lpfc: code cleanups in NVME initiator base
  scsi: lpfc: correct rdp diag portnames
  scsi: lpfc: remove dead sli3 nvme code
  scsi: lpfc: correct double print
  scsi: lpfc: Rename LPFC_MAX_EQ_DELAY to LPFC_MAX_EQ_DELAY_EQID_CNT
  scsi: lpfc: Rework lpfc Kconfig for NVME options
  scsi: lpfc: add transport eh_timed_out reference
  scsi: lpfc: Fix eh_deadline setting for sli3 adapters.
  scsi: lpfc: add NVME exchange aborts
  scsi: lpfc: Fix nvme allocation bug on failed nvme_fc_register_localport
  scsi: lpfc: Fix IO submission if WQ is full
  scsi: lpfc: Fix NVME CMD IU byte swapped word 1 problem
  scsi: lpfc: Fix RCTL value on NVME LS request and response
  scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters
  scsi: lpfc: fix missing spin_unlock on sql_list_lock
  scsi: lpfc: don't dereference dma_buf->iocbq before null check
  ...

Merge tag 'gfs2-4.11-rc3.fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 fix from Bob Peterson:
"This is an emergency patch for 4.11-rc3

  The GFS2 developers uncovered a really nasty problem that can lead to
  random corruption and kernel panic, much like the last one. Andreas
  Gruenbacher wrote a simple one-line patch to fix the problem."

* tag 'gfs2-4.11-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Avoid alignment hole in struct lm_lockname

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:

- self-test failure of crc32c on powerpc

- regressions of ecb(aes) when used with xts/lrw in s5p-sss

- a number of bugs in the omap RNG driver

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: s5p-sss - Fix spinlock recursion on LRW(AES)
  hwrng: omap - Do not access INTMASK_REG on EIP76
  hwrng: omap - use devm_clk_get() instead of of_clk_get()
  hwrng: omap - write registers after enabling the clock
  crypto: s5p-sss - Fix completing crypto request in IRQ handler
  crypto: powerpc - Fix initialisation of crc32c context

netfilter: nft_ct: do cleanup work when NFTA_CT_DIRECTION is invalid

We should jump to invoke __nft_ct_set_destroy() instead of just
return error.

Fixes: edee4f1e9245 ("netfilter: nft_ct: add zone id set support")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

gfs2: Avoid alignment hole in struct lm_lockname

Commit 88ffbf3e03 switches to using rhashtables for glocks, hashing over
the entire struct lm_lockname instead of its individual fields. On some
architectures, struct lm_lockname contains a hole of uninitialized
memory due to alignment rules, which now leads to incorrect hash values.
Get rid of that hole.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
CC: <stable@vger.kernel.org> #v4.3+

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Ensure that mtu is at least IPV6_MIN_MTU in ipv6 VTI tunnel driver,
    from Steffen Klassert.

2) Fix crashes when user tries to get_next_key on an LPM bpf map, from
    Alexei Starovoitov.

3) Fix detection of VLAN fitlering feature for bnx2x VF devices, from
    Michal Schmidt.

4) We can get a divide by zero when TCP socket are morphed into
    listening state, fix from Eric Dumazet.

5) Fix socket refcounting bugs in skb_complete_wifi_ack() and
    skb_complete_tx_timestamp(). From Eric Dumazet.

6) Use after free in dccp_feat_activate_values(), also from Eric
    Dumazet.

7) Like bonding team needs to use ETH_MAX_MTU as netdev->max_mtu, from
    Jarod Wilson.

8) Fix use after free in vrf_xmit(), from David Ahern.

9) Don't do UDP Fragmentation Offload on IPComp ipsec packets, from
    Alexey Kodanev.

10) Properly check napi_complete_done() return value in order to decide
    whether to re-enable IRQs or not in amd-xgbe driver, from Thomas
    Lendacky.

11) Fix double free of hwmon device in marvell phy driver, from Andrew
    Lunn.

12) Don't crash on malformed netlink attributes in act_connmark, from
    Etienne Noss.

13) Don't remove routes with a higher metric in ipv6 ECMP route replace,
    from Sabrina Dubroca.

14) Don't write into a cloned SKB in ipv6 fragmentation handling, from
    Florian Westphal.

15) Fix routing redirect races in dccp and tcp, basically the ICMP
    handler can't modify the socket's cached route in it's locked by the
    user at this moment. From Jon Maxwell.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (108 commits)
  qed: Enable iSCSI Out-of-Order
  qed: Correct out-of-bound access in OOO history
  qed: Fix interrupt flags on Rx LL2
  qed: Free previous connections when releasing iSCSI
  qed: Fix mapping leak on LL2 rx flow
  qed: Prevent creation of too-big u32-chains
  qed: Align CIDs according to DORQ requirement
  mlxsw: reg: Fix SPVMLR max record count
  mlxsw: reg: Fix SPVM max record count
  net: Resend IGMP memberships upon peer notification.
  dccp: fix memory leak during tear-down of unsuccessful connection request
  tun: fix premature POLLOUT notification on tun devices
  dccp/tcp: fix routing redirect race
  ucc/hdlc: fix two little issue
  vxlan: fix ovs support
  net: use net->count to check whether a netns is alive or not
  bridge: drop netfilter fake rtable unconditionally
  ipv6: avoid write to a possibly cloned skb
  net: wimax/i2400m: fix NULL-deref at probe
  isdn/gigaset: fix NULL-deref at probe
  ...

Merge branch 'for-4.11-fixes' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup fixes from Tejun Heo:
"Three cgroup fixes.  Nothing critical:

   - the pids controller could trigger suspicious RCU warning
     spuriously. Fixed.

   - in the debug controller, %p -> %pK to protect kernel pointer
     from getting exposed.

   - documentation formatting fix"

* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroups: censor kernel pointer in debug files
  cgroup/pids: remove spurious suspicious RCU usage warning
  cgroup: Fix indenting in PID controller documentation

Merge branch 'for-4.11-fixes' of git://git./linux/kernel/git/tj/libata

Pull libata fixes from Tejun Heo:
"Three libata fixes:

   - fix for a circular reference bug in sysfs code which prevented
     pata_legacy devices from being released after probe failure, which
     in turn prevented devres from releasing the associated resources.

   - drop spurious WARN in the command issue path which can be triggered
     by a legitimate passthrough command.

   - an ahci_qoriq specific fix"

* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: qoriq: correct the sata ecc setting error
  libata: drop WARN from protocol error in ata_sff_qc_issue()
  libata: transport: Remove circular dependency at free time

Merge branch 'for-4.11-fixes' of git://git./linux/kernel/git/tj/wq

Pull workqueue fix from Tejun Heo:
"If a delayed work is queued with NULL @wq, workqueue code explodes
  after the timer expires at which point it's difficult to tell who the
  culprit was.

  This actually happened and the offender was net/smc this time.

  Add an explicit sanity check for it in the queueing path"

* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: trigger WARN if queue_delayed_work() is called with NULL @wq

Merge branch 'for-4.11-fixes' of git://git./linux/kernel/git/tj/percpu

Pull percpu fixes from Tejun Heo:

- the allocation path was updating pcpu_nr_empty_pop_pages without the
   required locking which can lead to incorrect handling of empty chunks
   (e.g. keeping too many around), which is buggy but shouldn't lead to
   critical failures. Fixed by adding the locking

- a trivial patch to drop an unused param from pcpu_get_pages()

* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: remove unused chunk_alloc parameter from pcpu_get_pages()
  percpu: acquire pcpu_lock when updating pcpu_nr_empty_pop_pages

Merge branch 'qed-fixes'

Yuval Mintz says:

====================
qed: Fixes series

This address several different issues in qed.
The more significant portions:

Patch #1 would cause timeout when qedr utilizes the highest
CIDs availble for it [or when future qede adapters would utilize
queues in some constellations].

Patch #4 fixes a leak of mapped addresses; When iommu is enabled,
offloaded storage protocols might eventually run out of resources
and fail to map additional buffers.

Patches #6,#7 were missing in the initial iSCSI infrastructure
submissions, and would hamper qedi's stability when it reaches
out-of-order scenarios.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Enable iSCSI Out-of-Order

Missing in the initial submission, qed fails to propagate qedi's
request to enable OOO to firmware.

Fixes: fc831825f99e ("qed: Add support for hardware offloaded iSCSI")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Correct out-of-bound access in OOO history

Need to set the number of entries in database, otherwise the logic
would quickly surpass the array.

Fixes: 1d6cff4fca43 ("qed: Add iSCSI out of order packet handling")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Fix interrupt flags on Rx LL2

Before iterating over the the LL2 Rx ring, the ring's
spinlock is taken via spin_lock_irqsave().
The actual processing of the packet [including handling
by the protocol driver] is done without said lock,
so qed releases the spinlock and re-claims it afterwards.

Problem is that the final spin_lock_irqrestore() at the end
of the iteration uses the original flags saved from the
initial irqsave() instead of the flags from the most recent
irqsave(). So it's possible that the interrupt status would
be incorrect at the end of the processing.

Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support");
CC: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Free previous connections when releasing iSCSI

Fixes: fc831825f99e ("qed: Add support for hardware offloaded iSCSI")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Fix mapping leak on LL2 rx flow

When receiving an Rx LL2 packet, qed fails to unmap the previous buffer.

Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support");
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Prevent creation of too-big u32-chains

Current Logic would allow the creation of a chain with U32_MAX + 1
elements, when the actual maximum supported by the driver infrastructure
is U32_MAX.

Fixes: a91eb52abb50 ("qed: Revisit chain implementation")
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Align CIDs according to DORQ requirement

The Doorbell HW block can be configured at a granularity
of 16 x CIDs, so we need to make sure that the actual number
of CIDs configured would be a multiplication of 16.

Today, when RoCE is enabled - given that the number is unaligned,
doorbelling the higher CIDs would fail to reach the firmware and
would eventually timeout.

Fixes: dbb799c39717 ("qed: Initialize hardware for new protocols")
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mlxsw-small-fixes'

Jiri Pirko says:

====================
mlxsw: Couple of fixes

Couple or small fixes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: reg: Fix SPVMLR max record count

The num_rec field is 8 bit, so the maximal count number is 255.
This fixes vlans learning not being enabled for wider ranges than 255.

Fixes: a4feea74cd7a ("mlxsw: reg: Add Switch Port VLAN MAC Learning register definition")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: reg: Fix SPVM max record count

The num_rec field is 8 bit, so the maximal count number is 255. This
fixes vlans not being enabled for wider ranges than 255.

Fixes: b2e345f9a454 ("mlxsw: reg: Add Switch Port VID and Switch Port VLAN Membership registers definitions")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Resend IGMP memberships upon peer notification.

When we notify peers of potential changes, it's also good to update
IGMP memberships. For example, during VM migration, updating IGMP
memberships will redirect existing multicast streams to the VM at the
new location.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dccp: fix memory leak during tear-down of unsuccessful connection request

This patch fixes a memory leak, which happens if the connection request
is not fulfilled between parsing the DCCP options and handling the SYN
(because e.g. the backlog is full), because we forgot to free the
list of ack vectors.

Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

tun: fix premature POLLOUT notification on tun devices

aszlig observed failing ssh tunnels (-w) during initialization since
commit cc9da6cc4f56e0 ("ipv6: addrconf: use stable address generator for
ARPHRD_NONE"). We already had reports that the mentioned commit breaks
Juniper VPN connections. I can't clearly say that the Juniper VPN client
has the same problem, but it is worth a try to hint to this patch.

Because of the early generation of link local addresses, the kernel now
can start asking for routers on the local subnet much earlier than usual.
Those router solicitation packets arrive inside the ssh channels and
should be transmitted to the tun fd before the configuration scripts
might have upped the interface and made it ready for transmission.

ssh polls on the interface and receives back a POLL_OUT. It tries to send
the earily router solicitation packet to the tun interface. Unfortunately
it hasn't been up'ed yet by config scripts, thus failing with -EIO. ssh
doesn't retry again and considers the tun interface broken forever.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=121131
Fixes: cc9da6cc4f56 ("ipv6: addrconf: use stable address generator for ARPHRD_NONE")
Cc: Bjørn Mork <bjorn@mork.no>
Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Reported-by: Jonas Lippuner <jonas@lippuner.ca>
Cc: Jonas Lippuner <jonas@lippuner.ca>
Reported-by: aszlig <aszlig@redmoonstudios.org>
Cc: aszlig <aszlig@redmoonstudios.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

dccp/tcp: fix routing redirect race

As Eric Dumazet pointed out this also needs to be fixed in IPv6.
v2: Contains the IPv6 tcp/Ipv6 dccp patches as well.

We have seen a few incidents lately where a dst_enty has been freed
with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that
dst_entry. If the conditions/timings are right a crash then ensues when the
freed dst_entry is referenced later on. A Common crashing back trace is:

#8 [] page_fault at ffffffff8163e648
    [exception RIP: __tcp_ack_snd_check+74]
.
.
#9 [] tcp_rcv_established at ffffffff81580b64
#10 [] tcp_v4_do_rcv at ffffffff8158b54a
#11 [] tcp_v4_rcv at ffffffff8158cd02
#12 [] ip_local_deliver_finish at ffffffff815668f4
#13 [] ip_local_deliver at ffffffff81566bd9
#14 [] ip_rcv_finish at ffffffff8156656d
#15 [] ip_rcv at ffffffff81566f06
#16 [] __netif_receive_skb_core at ffffffff8152b3a2
#17 [] __netif_receive_skb at ffffffff8152b608
#18 [] netif_receive_skb at ffffffff8152b690
#19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3]
#20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3]
#21 [] net_rx_action at ffffffff8152bac2
#22 [] __do_softirq at ffffffff81084b4f
#23 [] call_softirq at ffffffff8164845c
#24 [] do_softirq at ffffffff81016fc5
#25 [] irq_exit at ffffffff81084ee5
#26 [] do_IRQ at ffffffff81648ff8

Of course it may happen with other NIC drivers as well.

It's found the freed dst_entry here:

224 static bool tcp_in_quickack_mode(struct sock *sk)↩
225 {↩
226 ▹       const struct inet_connection_sock *icsk = inet_csk(sk);↩
227 ▹       const struct dst_entry *dst = __sk_dst_get(sk);↩
228 ↩
229 ▹       return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩
230 ▹       ▹       (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩
231 }↩

But there are other backtraces attributed to the same freed dst_entry in
netfilter code as well.

All the vmcores showed 2 significant clues:

- Remote hosts behind the default gateway had always been redirected to a
different gateway. A rtable/dst_entry will be added for that host. Making
more dst_entrys with lower reference counts. Making this more probable.

- All vmcores showed a postitive LockDroppedIcmps value, e.g:

LockDroppedIcmps                  267

A closer look at the tcp_v4_err() handler revealed that do_redirect() will run
regardless of whether user space has the socket locked. This can result in a
race condition where the same dst_entry cached in sk->sk_dst_entry can be
decremented twice for the same socket via:

do_redirect()->__sk_dst_check()-> dst_release().

Which leads to the dst_entry being prematurely freed with another socket
pointing to it via sk->sk_dst_cache and a subsequent crash.

To fix this skip do_redirect() if usespace has the socket locked. Instead let
the redirect take place later when user space does not have the socket
locked.

The dccp/IPv6 code is very similar in this respect, so fixing it there too.

As Eric Garver pointed out the following commit now invalidates routes. Which
can set the dst->obsolete flag so that ipv4_dst_check() returns null and
triggers the dst_release().

Fixes: ceb3320610d6 ("ipv4: Kill routes during PMTU/redirect updates.")
Cc: Eric Garver <egarver@redhat.com>
Cc: Hannes Sowa <hsowa@redhat.com>
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ucc/hdlc: fix two little issue

1. modify bd_status from u32 to u16 in function hdlc_rx_done,
because bd_status register is 16bits
2. write bd_length register before writing bd_status register

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'powerpc-4.11-4' of git://git./linux/kernel/git/powerpc/linux

Pull some more powerpc fixes from Michael Ellerman:
"The main item is the addition of the Power9 Machine Check handler.
  This was delayed to make sure some details were correct, and is as
  minimal as possible.

  The rest is small fixes, two for the Power9 PMU, two dealing with
  obscure toolchain problems, two for the PowerNV IOMMU code (used by
  VFIO), and one to fix a crash on 32-bit machines with macio devices
  due to missing dma_ops.

  Thanks to:
    Alexey Kardashevskiy, Cyril Bur, Larry Finger, Madhavan Srinivasan,
    Nicholas Piggin"

* tag 'powerpc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: POWER9 machine check handler
  powerpc/64s: allow machine check handler to set severity and initiator
  powerpc/64s: fix handling of non-synchronous machine checks
  powerpc/pmac: Fix crash in dma-mapping.h with NULL dma_ops
  powerpc/powernv/ioda2: Update iommu table base on ownership change
  powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested
  selftests/powerpc: Replace stxvx and lxvx with stxvd2x/lxvd2x
  powerpc/perf: Handle sdar_mode for marked event in power9
  powerpc/perf: Fix perf_get_data_addr() for power9 DD1
  powerpc/boot: Fix zImage TOC alignment

vxlan: fix ovs support

The required changes in the function vxlan_dev_create() were missing
in commit 8bcdc4f3a20b.
The vxlan device is not registered anymore after this patch and the error
path causes an stack dump:
WARNING: CPU: 3 PID: 1498 at net/core/dev.c:6713 rollback_registered_many+0x9d/0x3f0

Fixes: 8bcdc4f3a20b ("vxlan: add changelink support")
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: use net->count to check whether a netns is alive or not

The previous idea was to check whether a net namespace is in
net_exit_list or not. It doesn't work, because net->exit_list is used in
__register_pernet_operations and __unregister_pernet_operations where
all namespaces are added to a temporary list to make cleanup in a error
case, so list_empty(&net->exit_list) always returns false.

Reported-by: Mantas Mikulėnas <grawity@gmail.com>
Fixes: 002d8a1a6c11 ("net: skip genenerating uevents for network namespaces that are exiting")
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'platform-drivers-x86-v4.11-2' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:
"Asus fixes for the airplane LED and a long awaited fujitsu cleanup.

  asus-wmi:
   - Remove quirk_no_rfkill
   - Detect quirk_no_rfkill from the DSDT

  fujitsu-laptop:
   - remove redundant MODULE_ALIAS entries
   - autodetect LCD interface on all models
   - simplify acpi_bus_register_driver() error handling
   - remove redundant forward declarations
   - replace numeric values with constants
   - rename FUNC_RFKILL to FUNC_FLAGS
   - make platform-related variables match naming convention
   - replace "hotkey" with "laptop" in symbol names
   - clearly denote backlight-related symbols"

* tag 'platform-drivers-x86-v4.11-2' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: asus-wmi: Remove quirk_no_rfkill
  platform/x86: asus-wmi: Detect quirk_no_rfkill from the DSDT
  platform/x86: fujitsu-laptop: remove redundant MODULE_ALIAS entries
  platform/x86: fujitsu-laptop: autodetect LCD interface on all models
  platform/x86: fujitsu-laptop: simplify acpi_bus_register_driver() error handling
  platform/x86: fujitsu-laptop: remove redundant forward declarations
  platform/x86: fujitsu-laptop: replace numeric values with constants
  platform/x86: fujitsu-laptop: rename FUNC_RFKILL to FUNC_FLAGS
  platform/x86: fujitsu-laptop: make platform-related variables match naming convention
  platform/x86: fujitsu-laptop: replace "hotkey" with "laptop" in symbol names
  platform/x86: fujitsu-laptop: clearly denote backlight-related symbols

bridge: drop netfilter fake rtable unconditionally

Andreas reports kernel oops during rmmod of the br_netfilter module.
Hannes debugged the oops down to a NULL rt6info->rt6i_indev.

Problem is that br_netfilter has the nasty concept of adding a fake
rtable to skb->dst; this happens in a br_netfilter prerouting hook.

A second hook (in bridge LOCAL_IN) is supposed to remove these again
before the skb is handed up the stack.

However, on module unload hooks get unregistered which means an
skb could traverse the prerouting hook that attaches the fake_rtable,
while the 'fake rtable remove' hook gets removed from the hooklist
immediately after.

Fixes: 34666d467cbf1e2e3c7 ("netfilter: bridge: move br_netfilter out of the core")
Reported-by: Andreas Karis <akaris@redhat.com>
Debugged-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: avoid write to a possibly cloned skb

ip6_fragment, in case skb has a fraglist, checks if the
skb is cloned.  If it is, it will move to the 'slow path' and allocates
new skbs for each fragment.

However, right before entering the slowpath loop, it updates the
nexthdr value of the last ipv6 extension header to NEXTHDR_FRAGMENT,
to account for the fragment header that will be inserted in the new
ipv6-fragment skbs.

In case original skb is cloned this munges nexthdr value of another
skb.  Avoid this by doing the nexthdr update for each of the new fragment
skbs separately.

This was observed with tcpdump on a bridge device where netfilter ipv6
reassembly is active:  tcpdump shows malformed fragment headers as
the l4 header (icmpv6, tcp, etc). is decoded as a fragment header.

Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Reported-by: Andreas Karis <akaris@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: wimax/i2400m: fix NULL-deref at probe

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

The endpoints are specifically dereferenced in the i2400m_bootrom_init
path during probe (e.g. in i2400mu_tx_bulk_out).

Fixes: f398e4240fce ("i2400m/USB: probe/disconnect, dev init/shutdown
and reset backends")
Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

isdn/gigaset: fix NULL-deref at probe

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.

Fixes: cf7776dc05b8 ("[PATCH] isdn4linux: Siemens Gigaset drivers -
direct USB connection")
Cc: stable <stable@vger.kernel.org> # 2.6.17
Cc: Hansjoerg Lipp <hjlipp@web.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: make ECMP route replacement less greedy

Commit 27596472473a ("ipv6: fix ECMP route replacement") introduced a
loop that removes all siblings of an ECMP route that is being
replaced. However, this loop doesn't stop when it has replaced
siblings, and keeps removing other routes with a higher metric.
We also end up triggering the WARN_ON after the loop, because after
this nsiblings < 0.

Instead, stop the loop when we have taken care of all routes with the
same metric as the route being replaced.

  Reproducer:
  ===========
    #!/bin/sh

    ip netns add ns1
    ip netns add ns2
    ip -net ns1 link set lo up

    for x in 0 1 2 ; do
        ip link add veth$x netns ns2 type veth peer name eth$x netns ns1
        ip -net ns1 link set eth$x up
        ip -net ns2 link set veth$x up
    done

    ip -net ns1 -6 r a 2000::/64 nexthop via fe80::0 dev eth0 \
            nexthop via fe80::1 dev eth1 nexthop via fe80::2 dev eth2
    ip -net ns1 -6 r a 2000::/64 via fe80::42 dev eth0 metric 256
    ip -net ns1 -6 r a 2000::/64 via fe80::43 dev eth0 metric 2048

    echo "before replace, 3 routes"
    ip -net ns1 -6 r | grep -v '^fe80\|^ff00'
    echo

    ip -net ns1 -6 r c 2000::/64 nexthop via fe80::4 dev eth0 \
            nexthop via fe80::5 dev eth1 nexthop via fe80::6 dev eth2

    echo "after replace, only 2 routes, metric 2048 is gone"
    ip -net ns1 -6 r | grep -v '^fe80\|^ff00'

Fixes: 27596472473a ("ipv6: fix ECMP route replacement")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "netfilter: nf_tables: add flush field to struct nft_set_iter"

This reverts commit 1f48ff6c5393aa7fe290faf5d633164f105b0aa7.

This patch is not required anymore now that we keep a dummy list of
set elements in the bitmap set implementation, so revert this before
we forget this code has no clients.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

mm, gup: fix typo in gup_p4d_range()

gup_p4d_range() should call gup_pud_range(), not itself.

[ This was not noticed on x86: this is the HAVE_GENERIC_RCU_GUP code
used by arm[64] and powerpc - Linus ]

Fixes: c2febafc6773 ("mm: convert generic code to 5-level paging")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reported-by: Anton Blanchard <anton@samba.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

netfilter: nft_set_bitmap: keep a list of dummy elements

Element comments may come without any prior set flag, so we have to keep
a list of dummy struct nft_set_ext to keep this information around. This
is only useful for set dumps to userspace. From the packet path, this
set type relies on the bitmap representation. This patch simplifies the
logic since we don't need to allocate the dummy nft_set_ext structure
anymore on the fly at the cost of increasing memory consumption because
of the list of dummy struct nft_set_ext.

Fixes: 665153ff5752 ("netfilter: nf_tables: add bitmap set type")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: Force fake conntrack entry to be at least 8 bytes aligned

Since the nfct and nfctinfo have been combined, the nf_conn structure
must be at least 8 bytes aligned, as the 3 LSB bits are used for the
nfctinfo. But there's a fake nf_conn structure to denote untracked
connections, which is created by a PER_CPU construct. This does not
guarantee that it will be 8 bytes aligned and can break the logic in
determining the correct nfctinfo.

I triggered this on a 32bit machine with the following error:

BUG: unable to handle kernel NULL pointer dereference at 00000af4
IP: nf_ct_deliver_cached_events+0x1b/0xfb
*pdpt = 0000000031962001 *pde = 0000000000000000

Oops: 0000 [#1] SMP
[Modules linked in: ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipv6 crc_ccitt ppdev r8169 parport_pc parport
OK ]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-test+ #75
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
task: c126ec00 task.stack: c1258000
EIP: nf_ct_deliver_cached_events+0x1b/0xfb
EFLAGS: 00010202 CPU: 0
EAX: 0021cd01 EBX: 00000000 ECX: 27b0c767 EDX: 32bcb17a
ESI: f34135c0 EDI: f34135c0 EBP: f2debd60 ESP: f2debd3c
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
CR0: 80050033 CR2: 00000af4 CR3: 309a0440 CR4: 001406f0
Call Trace:
<SOFTIRQ>
? ipv6_skip_exthdr+0xac/0xcb
ipv6_confirm+0x10c/0x119 [nf_conntrack_ipv6]
nf_hook_slow+0x22/0xc7
nf_hook+0x9a/0xad [ipv6]
? ip6t_do_table+0x356/0x379 [ip6_tables]
? ip6_fragment+0x9e9/0x9e9 [ipv6]
ip6_output+0xee/0x107 [ipv6]
? ip6_fragment+0x9e9/0x9e9 [ipv6]
dst_output+0x36/0x4d [ipv6]
NF_HOOK.constprop.37+0xb2/0xba [ipv6]
? icmp6_dst_alloc+0x2c/0xfd [ipv6]
? local_bh_enable+0x14/0x14 [ipv6]
mld_sendpack+0x1c5/0x281 [ipv6]
? mark_held_locks+0x40/0x5c
mld_ifc_timer_expire+0x1f6/0x21e [ipv6]
call_timer_fn+0x135/0x283
? detach_if_pending+0x55/0x55
? mld_dad_timer_expire+0x3e/0x3e [ipv6]
__run_timers+0x111/0x14b
? mld_dad_timer_expire+0x3e/0x3e [ipv6]
run_timer_softirq+0x1c/0x36
__do_softirq+0x185/0x37c
? test_ti_thread_flag.constprop.19+0xd/0xd
do_softirq_own_stack+0x22/0x28
</SOFTIRQ>
irq_exit+0x5a/0xa4
smp_apic_timer_interrupt+0x2a/0x34
apic_timer_interrupt+0x37/0x3c

By using DEFINE/DECLARE_PER_CPU_ALIGNED we can enforce at least 8 byte
alignment as all cache line sizes are at least 8 bytes or more.

Fixes: a9e419dc7be6 ("netfilter: merge ctinfo into nfct pointer storage area")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: bridge: honor frag_max_size when refragmenting

consider a bridge with mtu 9000, but end host sending smaller
packets to another host with mtu < 9000.

In this case, after reassembly, bridge+defrag would refragment,
and then attempt to send the reassembled packet as long as it
was below 9k.

Instead we have to cap by the largest fragment size seen.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: fix mismatch in big-endian system

Currently, there are two different methods to store an u16 integer to
the u32 data register. For example:
  u32 *dest = &regs->data[priv->dreg];
  1. *dest = 0; *(u16 *) dest = val_u16;
  2. *dest = val_u16;

For method 1, the u16 value will be stored like this, either in
big-endian or little-endian system:
  0          15           31
  +-+-+-+-+-+-+-+-+-+-+-+-+
  |   Value   |     0     |
  +-+-+-+-+-+-+-+-+-+-+-+-+

For method 2, in little-endian system, the u16 value will be the same
as listed above. But in big-endian system, the u16 value will be stored
like this:
  0          15           31
  +-+-+-+-+-+-+-+-+-+-+-+-+
  |     0     |   Value   |
  +-+-+-+-+-+-+-+-+-+-+-+-+

So later we use "memcmp(&regs->data[priv->sreg], data, 2);" to do
compare in nft_cmp, nft_lookup expr ..., method 2 will get the wrong
result in big-endian system, as 0~15 bits will always be zero.

For the similar reason, when loading an u16 value from the u32 data
register, we should use "*(u16 *) sreg;" instead of "(u16)*sreg;",
the 2nd method will get the wrong value in the big-endian system.

So introduce some wrapper functions to store/load an u8 or u16
integer to/from the u32 data register, and use them in the right
place.

Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_bitmap: fetch the element key based on the set->klen

Currently we just assume the element key as a u32 integer, regardless of
the set key length.

This is incorrect, for example, the tcp port number is only 16 bits.
So when we use the nft_payload expr to get the tcp dport and store
it to dreg, the dport will be stored at 0~15 bits, and 16~31 bits
will be padded with zero.

So the reg->data[dreg] will be looked like as below:
  0          15           31
  +-+-+-+-+-+-+-+-+-+-+-+-+
  | tcp dport |      0    |
  +-+-+-+-+-+-+-+-+-+-+-+-+
But for these big-endian systems, if we treate this register as a u32
integer, the element key will be larger than 65535, so the following
lookup in bitmap set will cause out of bound access.

Another issue is that if we add element with comments in bitmap
set(although the comments will be ignored eventually), the element will
vanish strangely. Because we treate the element key as a u32 integer, so
the comments will become the part of the element key, then the element
key will also be larger than 65535 and out of bound access will happen:
  # nft add element t s { 1 comment test }

Since set->klen is 1 or 2, it's fine to treate the element key as a u8 or
u16 integer.

Fixes: 665153ff5752 ("netfilter: nf_tables: add bitmap set type")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

bpf: improve read-only handling

Improve bpf_{prog,jit_binary}_{un,}lock_ro() by throwing a
one-time warning in case of an error when the image couldn't
be set read-only, and also mark struct bpf_prog as locked when
bpf_prog_lock_ro() was called.

Reason for the latter is that bpf_prog_unlock_ro() is called from
various places including error paths, and we shouldn't mess with
page attributes when really not needed.

For bpf_jit_binary_unlock_ro() this is not needed as jited flag
implicitly indicates this, thus for archs with ARCH_HAS_SET_MEMORY
we're guaranteed to have a previously locked image. Overall, this
should also help us to identify any further potential issues with
set_memory_*() helpers.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/bpf: fix broken build

Recent merge of 'linux-kselftest-4.11-rc1' tree broke bpf test build.
None of the tests were building and test_verifier.c had tons of compiler errors.
Fix it and add #ifdef CAP_IS_SUPPORTED to support old versions of libcap.
Tested on centos 6.8 and 7

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

mpls: Do not decrement alive counter for unregister events

Multipath routes can be rendered usesless when a device in one of the
paths is deleted. For example:

$ ip -f mpls ro ls
100
nexthop as to 200 via inet 172.16.2.2  dev virt12
nexthop as to 300 via inet 172.16.3.2  dev br0
101
nexthop as to 201 via inet6 2000:2::2  dev virt12
nexthop as to 301 via inet6 2000:3::2  dev br0

$ ip li del br0

When br0 is deleted the other hop is not considered in
mpls_select_multipath because of the alive check -- rt_nhn_alive
is 0.

rt_nhn_alive is decremented once in mpls_ifdown when the device is taken
down (NETDEV_DOWN) and again when it is deleted (NETDEV_UNREGISTER). For
a 2 hop route, deleting one device drops the alive count to 0. Since
devices are taken down before unregistering, the decrement on
NETDEV_UNREGISTER is redundant.

Fixes: c89359a42e2a4 ("mpls: support for dead routes")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

xen-netback: fix race condition on XenBus disconnect

In some cases during XenBus disconnect event handling and subsequent
queue resource release there may be some TX handlers active on
other processors. Use RCU in order to synchronize with them.

Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mpls: Send route delete notifications when router module is unloaded

When the mpls_router module is unloaded, mpls routes are deleted but
notifications are not sent to userspace leaving userspace caches
out of sync. Add the call to mpls_notify_route in mpls_net_exit as
routes are freed.

Fixes: 0189197f44160 ("mpls: Basic routing support")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

act_connmark: avoid crashing on malformed nlattrs with null parms

tcf_connmark_init does not check in its configuration if TCA_CONNMARK_PARMS
is set, resulting in a null pointer dereference when trying to access it.

[501099.043007] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
[501099.043039] IP: [<ffffffffc10c60fb>] tcf_connmark_init+0x8b/0x180 [act_connmark]
...
[501099.044334] Call Trace:
[501099.044345]  [<ffffffffa47270e8>] ? tcf_action_init_1+0x198/0x1b0
[501099.044363]  [<ffffffffa47271b0>] ? tcf_action_init+0xb0/0x120
[501099.044380]  [<ffffffffa47250a4>] ? tcf_exts_validate+0xc4/0x110
[501099.044398]  [<ffffffffc0f5fa97>] ? u32_set_parms+0xa7/0x270 [cls_u32]
[501099.044417]  [<ffffffffc0f60bf0>] ? u32_change+0x680/0x87b [cls_u32]
[501099.044436]  [<ffffffffa4725d1d>] ? tc_ctl_tfilter+0x4dd/0x8a0
[501099.044454]  [<ffffffffa44a23a1>] ? security_capable+0x41/0x60
[501099.044471]  [<ffffffffa470ca01>] ? rtnetlink_rcv_msg+0xe1/0x220
[501099.044490]  [<ffffffffa470c920>] ? rtnl_newlink+0x870/0x870
[501099.044507]  [<ffffffffa472cc61>] ? netlink_rcv_skb+0xa1/0xc0
[501099.044524]  [<ffffffffa47073f4>] ? rtnetlink_rcv+0x24/0x30
[501099.044541]  [<ffffffffa472c634>] ? netlink_unicast+0x184/0x230
[501099.044558]  [<ffffffffa472c9d8>] ? netlink_sendmsg+0x2f8/0x3b0
[501099.044576]  [<ffffffffa46d8880>] ? sock_sendmsg+0x30/0x40
[501099.044592]  [<ffffffffa46d8e03>] ? SYSC_sendto+0xd3/0x150
[501099.044608]  [<ffffffffa425fda1>] ? __do_page_fault+0x2d1/0x510
[501099.044626]  [<ffffffffa47fbd7b>] ? system_call_fast_compare_end+0xc/0x9b

Fixes: 22a5dc0e5e3e ("net: sched: Introduce connmark action")
Signed-off-by: Étienne Noss <etienne.noss@wifirst.fr>
Signed-off-by: Victorien Molle <victorien.molle@wifirst.fr>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make IP 'forwarding' doc more precise

It wasn't clear if the 'forwarding' setting needs to be enabled on the
interface that packets are received from, or on the interface that
packets are forwarded to, or both.

In fact (according to my code reading) the setting is relevant on the
interface that packets are received from, so this change updates the doc
to say that.

Signed-off-by: Neil Jerram <neil@tigera.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

netvsc: handle select_queue when device is being removed

Move the send indirection table from the inner device (netvsc)
to the network device context.

It is possible that netvsc_device is not present (remove in progress).
This solves potential use after free issues when packet is being
created during MTU change, shutdown, or queue count changes.

Fixes: d8e18ee0fa96 ("netvsc: enhance transmit select_queue")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: aquantia: call set_irq_affinity_hint before free_irq

When a network interface controlled by the aquantia ethernet driver is brought
down a warning is output in dmesg (see below).

The problem is that aq_pci_func_free_irqs() is calling free_irq() before it is
calling irq_set_affinity_hint().

WARNING: CPU: 4 PID: 10068 at kernel/irq/manage.c:1503 __free_irq+0x24d/0x2b0
<snip>
Call Trace:
dump_stack+0x63/0x87
__warn+0xd1/0xf0
warn_slowpath_null+0x1d/0x20
__free_irq+0x24d/0x2b0
free_irq+0x39/0x90
aq_pci_func_free_irqs+0x52/0xa0 [atlantic]
aq_nic_stop+0xca/0xd0 [atlantic]
aq_ndev_close+0x1d/0x40 [atlantic]
__dev_close_many+0x99/0x100
__dev_close+0x67/0xb0
<snip>

Fixes: 36a4a50f4048 ("net: ethernet: aquantia: switch to pci_alloc_irq_vectors")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David Arcari <darcari@redhat.com>
Tested-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

platform/x86: asus-wmi: Remove quirk_no_rfkill

With the detection introduced in the previous patches, we don't need
these static DMI-based quirks anymore.

This reverts the following commits:
56a37a72002b "asus-wmi: Add quirk_no_rfkill_wapf4 for the Asus X456UA"
a961a285b479 "asus-wmi: Add quirk_no_rfkill_wapf4 for the Asus X456UF"
6b7ff2af5286 "asus-wmi: Add quirk_no_rfkill for the Asus Z550MA"
02db9ff7af18 "asus-wmi: Add quirk_no_rfkill for the Asus U303LB"
2d735244b798 "asus-wmi: Add quirk_no_rfkill for the Asus N552VW"
a977e59c0c67 "asus-wmi: Create quirk for airplane_mode LED"

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[dvhart: minor commit message corrections]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Linux 4.11-rc2

Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Martin Schwidefsky:

- four patches to get the new cputime code in shape for s390

- add the new statx system call

- a few bug fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: wire up statx system call
  KVM: s390: Fix guest migration for huge guests resulting in panic
  s390/ipl: always use load normal for CCW-type re-IPL
  s390/timex: micro optimization for tod_to_ns
  s390/cputime: provide archicture specific cputime_to_nsecs
  s390/cputime: reset all accounting fields on fork
  s390/cputime: remove last traces of cputime_t
  s390: fix in-kernel program checks
  s390/crypt: fix missing unlock in ctr_paes_crypt on error path

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:

- a fix for the kexec/purgatory regression which was introduced in the
   merge window via an innocent sparse fix. We could have reverted that
   commit, but on deeper inspection it turned out that the whole
   machinery is neither documented nor robust. So a proper cleanup was
   done instead

- the fix for the TLB flush issue which was discovered recently

- a simple typo fix for a reboot quirk

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tlb: Fix tlb flushing when lguest clears PGE
  kexec, x86/purgatory: Unbreak it and clean it up
  x86/reboot/quirks: Fix typo in ASUS EeeBook X205TA reboot quirk

Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:

- a workaround for a GIC erratum

- a missing stub function for CONFIG_IRQDOMAIN=n

- fixes for a couple of type inconsistencies

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/crossbar: Fix incorrect type of register size
  irqchip/gicv3-its: Add workaround for QDF2400 ITS erratum 0065
  irqdomain: Add empty irq_domain_check_msi_remap
  irqchip/crossbar: Fix incorrect type of local variables

Merge remote-tracking branch 'mkp-scsi/4.11/scsi-fixes' into fixes

x86/tlb: Fix tlb flushing when lguest clears PGE

Fengguang reported random corruptions from various locations on x86-32
after commits d2852a224050 ("arch: add ARCH_HAS_SET_MEMORY config") and
9d876e79df6a ("bpf: fix unlocking of jited image when module ronx not set")
that uses the former. While x86-32 doesn't have a JIT like x86_64, the
bpf_prog_lock_ro() and bpf_prog_unlock_ro() got enabled due to
ARCH_HAS_SET_MEMORY, whereas Fengguang's test kernel doesn't have module
support built in and therefore never had the DEBUG_SET_MODULE_RONX setting
enabled.

After investigating the crashes further, it turned out that using
set_memory_ro() and set_memory_rw() didn't have the desired effect, for
example, setting the pages as read-only on x86-32 would still let
probe_kernel_write() succeed without error. This behavior would manifest
itself in situations where the vmalloc'ed buffer was accessed prior to
set_memory_*() such as in case of bpf_prog_alloc(). In cases where it
wasn't, the page attribute changes seemed to have taken effect, leading to
the conclusion that a TLB invalidate didn't happen. Moreover, it turned out
that this issue reproduced with qemu in "-cpu kvm64" mode, but not for
"-cpu host". When the issue occurs, change_page_attr_set_clr() did trigger
a TLB flush as expected via __flush_tlb_all() through cpa_flush_range(),
though.

There are 3 variants for issuing a TLB flush: invpcid_flush_all() (depends
on CPU feature bits X86_FEATURE_INVPCID, X86_FEATURE_PGE), cr4 based flush
(depends on X86_FEATURE_PGE), and cr3 based flush. For "-cpu host" case in
my setup, the flush used invpcid_flush_all() variant, whereas for "-cpu
kvm64", the flush was cr4 based. Switching the kvm64 case to cr3 manually
worked fine, and further investigating the cr4 one turned out that
X86_CR4_PGE bit was not set in cr4 register, meaning the
__native_flush_tlb_global_irq_disabled() wrote cr4 twice with the same
value instead of clearing X86_CR4_PGE in the first write to trigger the
flush.

It turned out that X86_CR4_PGE was cleared from cr4 during init from
lguest_arch_host_init() via adjust_pge(). The X86_FEATURE_PGE bit is also
cleared from there due to concerns of using PGE in guest kernel that can
lead to hard to trace bugs (see bff672e630a0 ("lguest: documentation V:
Host") in init()). The CPU feature bits are cleared in dynamic
boot_cpu_data, but they never propagated to __flush_tlb_all() as it uses
static_cpu_has() instead of boot_cpu_has() for testing which variant of TLB
flushing to use, meaning they still used the old setting of the host
kernel.

Clearing via setup_clear_cpu_cap(X86_FEATURE_PGE) so this would propagate
to static_cpu_has() checks is too late at this point as sections have been
patched already, so for now, it seems reasonable to switch back to
boot_cpu_has(X86_FEATURE_PGE) as it was prior to commit c109bf95992b
("x86/cpufeature: Remove cpu_has_pge"). This lets the TLB flush trigger via
cr3 as originally intended, properly makes the new page attributes visible
and thus fixes the crashes seen by Fengguang.

Fixes: c109bf95992b ("x86/cpufeature: Remove cpu_has_pge")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: bp@suse.de
Cc: Kees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: lkp@01.org
Cc: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernrl.org/r/20170301125426.l4nf65rx4wahohyl@wfg-t540p.sh.intel.com
Link: http://lkml.kernel.org/r/25c41ad9eca164be4db9ad84f768965b7eb19d9e.1489191673.git.daniel@iogearbox.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Radim Krčmář:
"ARM updates from Marc Zyngier:
   - vgic updates:
     - Honour disabling the ITS
     - Don't deadlock when deactivating own interrupts via MMIO
     - Correctly expose the lact of IRQ/FIQ bypass on GICv3

   - I/O virtualization:
     - Make KVM_CAP_NR_MEMSLOTS big enough for large guests with many
       PCIe devices

   - General bug fixes:
     - Gracefully handle exception generated with syndroms that the host
       doesn't understand
     - Properly invalidate TLBs on VHE systems

  x86:
   - improvements in emulation of VMCLEAR, VMX MSR bitmaps, and VCPU
     reset

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: nVMX: do not warn when MSR bitmap address is not backed
  KVM: arm64: Increase number of user memslots to 512
  KVM: arm/arm64: Remove KVM_PRIVATE_MEM_SLOTS definition that are unused
  KVM: arm/arm64: Enable KVM_CAP_NR_MEMSLOTS on arm/arm64
  KVM: Add documentation for KVM_CAP_NR_MEMSLOTS
  KVM: arm/arm64: VGIC: Fix command handling while ITS being disabled
  arm64: KVM: Survive unknown traps from guests
  arm: KVM: Survive unknown traps from guests
  KVM: arm/arm64: Let vcpu thread modify its own active state
  KVM: nVMX: reset nested_run_pending if the vCPU is going to be reset
  kvm: nVMX: VMCLEAR should not cause the vCPU to shut down
  KVM: arm/arm64: vgic-v3: Don't pretend to support IRQ/FIQ bypass
  arm64: KVM: VHE: Clear HCR_TGE when invalidating guest TLBs

Merge tag 'extable-fix' of git://git./linux/kernel/git/paulg/linux

Pull extable.h fix from Paul Gortmaker:
"Fixup for arch/score after extable.h introduction.

  It seems that Guenter is the only one on the planet doing builds for
  arch/score -- we don't have compile coverage for it in linux-next or
  in the kbuild-bot either. Guenter couldn't even recall where he got
  his toolchain, but was kind enough to share it with me so I could
  validate this change and also add arch/score to my build coverage.

  I sat on this a bit in case there was any other fallout in other arch
  dirs, but since this still seems to be the only one, I might as well
  send it on its way"

* tag 'extable-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  score: Fix implicit includes now failing build after extable change

Merge tag 'random_for_linus' of git://git./linux/kernel/git/tytso/random

Pull random updates from Ted Ts'o:
"Change get_random_{int,log} to use the CRNG used by /dev/urandom and
  getrandom(2). It's faster and arguably more secure than cut-down MD5
  that we had been using.

  Also do some code cleanup"

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: move random_min_urandom_seed into CONFIG_SYSCTL ifdef block
  random: convert get_random_int/long into get_random_u32/u64
  random: use chacha20 for get_random_int/long
  random: fix comment for unused random_min_urandom_seed
  random: remove variable limit
  random: remove stale urandom_init_wait
  random: remove stale maybe_reseed_primary_crng

score: Fix implicit includes now failing build after extable change

After changing from module.h to extable.h, score builds fail with:

  arch/score/kernel/traps.c: In function 'do_ri':
  arch/score/kernel/traps.c:248:4: error: implicit declaration of function 'user_disable_single_step'
  arch/score/mm/extable.c: In function 'fixup_exception':
  arch/score/mm/extable.c:32:38: error: dereferencing pointer to incomplete type
  arch/score/mm/extable.c:34:24: error: dereferencing pointer to incomplete type

because extable.h doesn't drag in the same amount of headers as the
module.h did.  Add in the headers which were implicitly expected.

Fixes: 90858794c960 ("module.h: remove extable.h include now users have migrated")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[PG: tweak commit log; refresh for sched header refactoring.]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Merge tag 'tty-4.11-rc2' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial fixes frpm Greg KH:
"Here are two bugfixes for tty stuff for 4.11-rc2.

  One of them resolves the pretty bad bug in the n_hdlc code that
  Alexander Popov found and fixed and has been reported everywhere. The
  other just fixes a samsung serial driver issue when DMA fails on some
  systems.

  Both have been in linux-next with no reported issues"

* tag 'tty-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: samsung: Continue to work if DMA request fails
  tty: n_hdlc: get rid of racy n_hdlc.tbuf

Merge tag 'staging-4.11-rc2' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
"Here are two small build warning fixes for some staging drivers that
  Arnd has found on his valiant quest to get the kernel to build
  properly with no warnings.

  Both of these have been in linux-next this week and resolve the
  reported issues"

* tag 'staging-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: octeon: remove unused variable
  staging/vc04_services: add CONFIG_OF dependency

Merge tag 'usb-4.11-rc2' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here is a number of different USB fixes for 4.11-rc2.

  Seems like there were a lot of unresolved issues that people have been
  finding for this subsystem, and a bunch of good security auditing
  happening as well from Johan Hovold. There's the usual batch of gadget
  driver fixes and xhci issues resolved as well.

All of these have been in linux-next with no reported issues"

* tag 'usb-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
  usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers
  usb: host: xhci-dbg: HCIVERSION should be a binary number
  usb: xhci: remove dummy extra_priv_size for size of xhci_hcd struct
  usb: xhci-mtk: check hcc_params after adding primary hcd
  USB: serial: digi_acceleport: fix OOB-event processing
  MAINTAINERS: usb251xb: remove reference inexistent file
  doc: dt-bindings: usb251xb: mark reg as required
  usb: usb251xb: dt: add unit suffix to oc-delay and power-on-time
  usb: usb251xb: remove max_{power,current}_{sp,bp} properties
  usb-storage: Add ignore-residue quirk for Initio INIC-3619
  USB: iowarrior: fix NULL-deref in write
  USB: iowarrior: fix NULL-deref at probe
  usb: phy: isp1301: Add OF device ID table
  usb: ohci-at91: Do not drop unhandled USB suspend control requests
  USB: serial: safe_serial: fix information leak in completion handler
  USB: serial: io_ti: fix information leak in completion handler
  USB: serial: omninet: drop open callback
  USB: serial: omninet: fix reference leaks at open
  USB: serial: io_ti: fix NULL-deref in interrupt callback
  usb: dwc3: gadget: make to increment req->remaining in all cases
  ...

Merge tag 'pinctrl-v4.11-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl fixes from Linus Walleij:
"Two smaller pin control fixes for the v4.11 series:

   - Add a get_direction() function to the qcom driver

   - Fix two pin names in the uniphier driver"

* tag 'pinctrl-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: uniphier: change pin names of aio/xirq for LD11
  pinctrl: qcom: add get_direction function

kexec, x86/purgatory: Unbreak it and clean it up

The purgatory code defines global variables which are referenced via a
symbol lookup in the kexec code (core and arch).

A recent commit addressing sparse warnings made these static and thereby
broke kexec_file.

Why did this happen? Simply because the whole machinery is undocumented and
lacks any form of forward declarations. The variable names are unspecific
and lack a prefix, so adding forward declarations creates shadow variables
in the core code. Aside of that the code relies on magic constants and
duplicate struct definitions with no way to ensure that these things stay
in sync. The section placement of the purgatory variables happened by
chance and not by design.

Unbreak kexec and cleanup the mess:

- Add proper forward declarations and document the usage
- Use common struct definition
- Use the proper common defines instead of magic constants
- Add a purgatory_ prefix to have a proper name space
- Use ARRAY_SIZE() instead of a homebrewn reimplementation
- Add proper sections to the purgatory variables [ From Mike ]

Fixes: 72042a8c7b01 ("x86/purgatory: Make functions and variables static")
Reported-by: Mike Galbraith <<efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Nicholas Mc Guire <der.herr@hofr.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: "Tobin C. Harding" <me@tobin.cc>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1703101315140.3681@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Merge tag 'ceph-for-4.11-rc2' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:

- a fix for the recently discovered misdirected requests bug present in
   jewel and later on the server side and all stable kernels

- a fixup for -rc1 CRUSH changes

- two usability enhancements: osd_request_timeout option and
   supported_features bus attribute.

* tag 'ceph-for-4.11-rc2' of git://github.com/ceph/ceph-client:
  libceph: osd_request_timeout option
  rbd: supported_features bus attribute
  libceph: don't set weight to IN when OSD is destroyed
  libceph: fix crush_decode() for older maps

Merge branch 'mlx5-fixes'

Saeed Mahameed says:

====================
Mellanox mlx5 fixes 2017-03-09

This series contains some mlx5 core and ethernet driver fixes.

For -stable:
net/mlx5e: remove IEEE/CEE mode check when setting DCBX mode (for kernel >= 4.10)
net/mlx5e: Avoid wrong identification of rules on deletion (for kernel >= 4.9)
net/mlx5: Don't save PCI state when PCI error is detected (for kernel >= 4.9)
net/mlx5: Fix create autogroup prev initializer (for kernel >=4.9)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5e: Fix loopback selftest

Change packet type handler to ETH_P_IP instead of ETH_P_ALL
since we are already expecting an IP packet.

Also, using ETH_P_ALL will cause the loopback test packet type handler
to be called on all outgoing packets, especially our own self loopback
test SKB, which will be validated on xmit as well, and we don't want that.

Tested with:
ethtool -t ethX
validated that the loopback test passes.

Fixes: 0952da791c97 ('net/mlx5e: Add support for loopback selftest')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5e: Avoid wrong identification of rules on deletion

When deleting offloaded TC flows, we must correctly identify E-switch
rules. The current check could get us wrong w.r.t to rules set on the
PF. Since it's possible to set NIC rules on the PF, switch to SRIOV
offloads mode and then attempt to delete a NIC rule.

To solve that, we add a flags field to offloaded rules, set it on
creation time and use that over the code where currently needed.

Fixes: 8b32580df1cb ('net/mlx5e: Add TC vlan action for SRIOV offloads')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5e: remove IEEE/CEE mode check when setting DCBX mode

Currently, the function setdcbx fails if the request dcbx mode
is either IEEE or CEE. We remove the IEEE/CEE mode check because
we support both IEEE and CEE interfaces.

Fixes: 3a6a931dfb8e ("net/mlx5e: Support DCBX CEE API")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5: Don't save PCI state when PCI error is detected

When a PCI error is detected the PCI state could be corrupt, don't save
it in that flow. Save the state after initialization. After restoring the
PCI state during slot reset save it again, restoring the state destroys
the previously saved state info.

Fixes: 05ac2c0b7438 ('net/mlx5: Fix race between PCI error handlers and
health work')
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5: Fix create autogroup prev initializer

The autogroups list is a list of non overlapping group boundaries
sorted by their start index. If the autogroups list wasn't empty
and an empty group slot was found at the start of the list,
the new group was added to the end of the list instead of the
beginning, as the prev initializer was incorrect.
When this was repeated, it caused multiple groups to have
overlapping boundaries.

Fixed that by correctly initializing the prev pointer to the
start of the list.

Fixes: eccec8da3b4e ('net/mlx5: Keep autogroups list ordered')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"Here are some driver bugfixes from I2C.

  Unusual this time are the two reverts. One because I accidently picked
  a patch from the list which I should have pulled from my co-maintainer
  instead ("missing of_node_put"). And one which I wrongly assumed to be
  an easy fix but it turned out already that it needs more iterations
  ("copy device properties")"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Revert "i2c: copy device properties when using i2c_register_board_info()"
  Revert "i2c: add missing of_node_put in i2c_mux_del_adapters"
  i2c: exynos5: Avoid transaction timeouts due TRANSFER_DONE_AUTO not set
  i2c: designware: add reset interface
  i2c: meson: fix wrong variable usage in meson_i2c_put_data
  i2c: copy device properties when using i2c_register_board_info()
  i2c: m65xx: drop superfluous quirk structure
  i2c: brcmstb: Fix START and STOP conditions
  i2c: add missing of_node_put in i2c_mux_del_adapters
  i2c: riic: fix restart condition
  i2c: add missing of_node_put in i2c_mux_del_adapters

Merge tag 'drm-fixes-for-4.11-rc2' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
"Intel, amd and mxsfb fixes.

  These are the drm fixes I've collected for rc2. Mostly i915 GVT only
  fixes, along with a single EDID fix, some mxsfb fixes and a few minor
  amd fixes"

* tag 'drm-fixes-for-4.11-rc2' of git://people.freedesktop.org/~airlied/linux: (38 commits)
  drm: mxsfb: Implement drm_panel handling
  drm: mxsfb_crtc: Fix the framebuffer misplacement
  drm: mxsfb: Fix crash when provided invalid DT bindings
  drm: mxsfb: fix pixel clock polarity
  drm: mxsfb: use bus_format to determine LCD bus width
  drm/amdgpu: bump driver version for some new features
  drm/amdgpu: validate paramaters in the gem ioctl
  drm/amd/amdgpu: fix console deadlock if late init failed
  drm/i915/gvt: change some gvt_err to gvt_dbg_cmd
  drm/i915/gvt: protect RO and Rsvd bits of virtual vgpu configuration space
  drm/i915/gvt: handle workload lifecycle properly
  drm/edid: Add EDID_QUIRK_FORCE_8BPC quirk for Rotel RSX-1058
  drm/i915/gvt: fix an error for F_RO flag
  drm/i915/gvt: use pfn_valid for better checking
  drm/i915/gvt: set SFUSE_STRAP properly for vitual monitor detection
  drm/i915/gvt: fix an error for one register
  drm/i915/gvt: add more registers into handlers list
  drm/i915/gvt: have more registers with F_CMD_ACCESS flags set
  drm/i915/gvt: add some new MMIOs to cmd_access white list
  drm/i915/gvt: fix pcode mailbox write emulation of BDW
  ...

rxrpc: Wake up the transmitter if Rx window size increases on the peer

The RxRPC ACK packet may contain an extension that includes the peer's
current Rx window size for this call.  We adjust the local Tx window size
to match.  However, the transmitter can stall if the receive window is
reduced to 0 by the peer and then reopened.

This is because the normal way that the transmitter is re-energised is by
dropping something out of our Tx queue and thus making space.  When a
single gap is made, the transmitter is woken up.  However, because there's
nothing in the Tx queue at this point, this doesn't happen.

To fix this, perform a wake_up() any time we see the peer's Rx window size
increasing.

The observable symptom is that calls start failing on ETIMEDOUT and the
following:

kAFS: SERVER DEAD state=-62

appears in dmesg.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>