git.openwrt.org Git - openwrt/staging/blogic.git/log

Merge tag 'devmem-v4.11-rc7' of git://git./linux/kernel/git/kees/linux

Pull CONFIG_STRICT_DEVMEM fix from Kees Cook:
"Fixes /dev/mem to read back zeros for System RAM areas in the 1MB
  exception area on x86 to avoid exposing RAM or tripping hardened
  usercopy"

* tag 'devmem-v4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  mm: Tighten x86 /dev/mem with zeroing reads

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio fixes from Michael S. Tsirkin:
"virtio oops fixes

  The virtio pci rework using shared interrupts caused a lot of issues.
  We tried to fix them but run out of time. Revert for now, and revisit
  the issue for the next kernel.

  Luckily we are able to do this without loosing automatic interrupt
  NUMA affinity which was the main motivator for the rework"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio-pci: Remove affinity hint before freeing the interrupt
  Revert "virtio_pci: remove struct virtio_pci_vq_info"
  Revert "virtio_pci: use shared interrupts for virtqueues"
  Revert "virtio_pci: don't duplicate the msix_enable flag in struct pci_dev"
  Revert "virtio_pci: simplify MSI-X setup"
  Revert "virtio_pci: fix out of bound access for msix_names"
  MAINTAINERS: fix virtio file pattern
  virtio_console: fix uninitialized variable use
  virtio_net: clear MTU when out of range
  virtio: allow drivers to validate features
  virtio_net: enable big packets for large MTU values

Merge branch 'akpm' (patches from Andrew)

Merge fixes from Andrew Morton:
"11 fixes.

  The presence of 'thp: reduce indentation level in change_huge_pmd()'
  is unfortunate. But the patchset had been decently reviewed and tested
  before we decided it was needed in -stable and I felt it best not to
  churn things at the last minute"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mailmap: add Martin Kepplinger's email
  zsmalloc: expand class bit
  zram: do not use copy_page with non-page aligned address
  zram: fix operator precedence to get offset
  hugetlbfs: fix offset overflow in hugetlbfs mmap
  thp: fix MADV_DONTNEED vs clear soft dirty race
  thp: fix MADV_DONTNEED vs. MADV_FREE race
  mm: drop unused pmdp_huge_get_and_clear_notify()
  thp: fix MADV_DONTNEED vs. numa balancing race
  thp: reduce indentation level in change_huge_pmd()
  z3fold: fix page locking in z3fold_alloc()

mailmap: add Martin Kepplinger's email

Set the partly deprecated companies' email addresses as alias for the
personal one.

Link: http://lkml.kernel.org/r/1491984622-17321-1-git-send-email-martin.kepplinger@ginzinger.com
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zsmalloc: expand class bit

Now 64K page system, zsamlloc has 257 classes so 8 class bit is not
enough.  With that, it corrupts the system when zsmalloc stores
65536byte data(ie, index number 256) so that this patch increases class
bit for simple fix for stable backport.  We should clean up this mess
soon.

  index size
  0 32
  1 288
  ..
  ..
  204 52256
  256 65536

Fixes: 3783689a1 ("zsmalloc: introduce zspage structure")
Link: http://lkml.kernel.org/r/1492042622-12074-3-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: do not use copy_page with non-page aligned address

The copy_page is optimized memcpy for page-alinged address.  If it is
used with non-page aligned address, it can corrupt memory which means
system corruption.  With zram, it can happen with

1. 64K architecture
2. partial IO
3. slub debug

Partial IO need to allocate a page and zram allocates it via kmalloc.
With slub debug, kmalloc(PAGE_SIZE) doesn't return page-size aligned
address.  And finally, copy_page(mem, cmem) corrupts memory.

So, this patch changes it to memcpy.

Actuaully, we don't need to change zram_bvec_write part because zsmalloc
returns page-aligned address in case of PAGE_SIZE class but it's not
good to rely on the internal of zsmalloc.

Note:
When this patch is merged to stable, clear_page should be fixed, too.
Unfortunately, recent zram removes it by "same page merge" feature so
it's hard to backport this patch to -stable tree.

I will handle it when I receive the mail from stable tree maintainer to
merge this patch to backport.

Fixes: 42e99bd ("zram: optimize memory operations with clear_page()/copy_page()")
Link: http://lkml.kernel.org/r/1492042622-12074-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zram: fix operator precedence to get offset

In zram_rw_page, the logic to get offset is wrong by operator precedence
(i.e., "<<" is higher than "&"). With wrong offset, zram can corrupt
the user's data. This patch fixes it.

Fixes: 8c7f01025 ("zram: implement rw_page operation of zram")
Link: http://lkml.kernel.org/r/1492042622-12074-1-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: fix offset overflow in hugetlbfs mmap

If mmap() maps a file, it can be passed an offset into the file at which
the mapping is to start.  Offset could be a negative value when
represented as a loff_t.  The offset plus length will be used to update
the file size (i_size) which is also a loff_t.

Validate the value of offset and offset + length to make sure they do
not overflow and appear as negative.

Found by syzcaller with commit ff8c0c53c475 ("mm/hugetlb.c: don't call
region_abort if region_chg fails") applied.  Prior to this commit, the
overflow would still occur but we would luckily return ENOMEM.

To reproduce:

   mmap(0, 0x2000, 0, 0x40021, 0xffffffffffffffffULL, 0x8000000000000000ULL);

Resulted in,

  kernel BUG at mm/hugetlb.c:742!
  Call Trace:
   hugetlbfs_evict_inode+0x80/0xa0
   evict+0x24a/0x620
   iput+0x48f/0x8c0
   dentry_unlink_inode+0x31f/0x4d0
   __dentry_kill+0x292/0x5e0
   dput+0x730/0x830
   __fput+0x438/0x720
   ____fput+0x1a/0x20
   task_work_run+0xfe/0x180
   exit_to_usermode_loop+0x133/0x150
   syscall_return_slowpath+0x184/0x1c0
   entry_SYSCALL_64_fastpath+0xab/0xad

Fixes: ff8c0c53c475 ("mm/hugetlb.c: don't call region_abort if region_chg fails")
Link: http://lkml.kernel.org/r/1491951118-30678-1-git-send-email-mike.kravetz@oracle.com
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: fix MADV_DONTNEED vs clear soft dirty race

Yet another instance of the same race.

Fix is identical to change_huge_pmd().

See "thp: fix MADV_DONTNEED vs. numa balancing race" for more details.

Link: http://lkml.kernel.org/r/20170302151034.27829-5-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: fix MADV_DONTNEED vs. MADV_FREE race

Both MADV_DONTNEED and MADV_FREE handled with down_read(mmap_sem).

It's critical to not clear pmd intermittently while handling MADV_FREE
to avoid race with MADV_DONTNEED:

CPU0: CPU1:
madvise_free_huge_pmd()
pmdp_huge_get_and_clear_full()
madvise_dontneed()
zap_pmd_range()
pmd_trans_huge(*pmd) == 0 (without ptl)
// skip the pmd
set_pmd_at();
// pmd is re-established

It results in MADV_DONTNEED skipping the pmd, leaving it not cleared.
It violates MADV_DONTNEED interface and can result is userspace
misbehaviour.

Basically it's the same race as with numa balancing in
change_huge_pmd(), but a bit simpler to mitigate: we don't need to
preserve dirty/young flags here due to MADV_FREE functionality.

[kirill.shutemov@linux.intel.com: Urgh... Power is special again]
Link: http://lkml.kernel.org/r/20170303102636.bhd2zhtpds4mt62a@black.fi.intel.com
Link: http://lkml.kernel.org/r/20170302151034.27829-4-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: drop unused pmdp_huge_get_and_clear_notify()

Dave noticed that after fixing MADV_DONTNEED vs numa balancing race the
last pmdp_huge_get_and_clear_notify() user is gone.

Let's drop the helper.

Link: http://lkml.kernel.org/r/20170306112047.24809-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: fix MADV_DONTNEED vs. numa balancing race

In case prot_numa, we are under down_read(mmap_sem).  It's critical to
not clear pmd intermittently to avoid race with MADV_DONTNEED which is
also under down_read(mmap_sem):

CPU0: CPU1:
change_huge_pmd(prot_numa=1)
pmdp_huge_get_and_clear_notify()
madvise_dontneed()
zap_pmd_range()
  pmd_trans_huge(*pmd) == 0 (without ptl)
  // skip the pmd
set_pmd_at();
// pmd is re-established

The race makes MADV_DONTNEED miss the huge pmd and don't clear it
which may break userspace.

Found by code analysis, never saw triggered.

Link: http://lkml.kernel.org/r/20170302151034.27829-3-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: reduce indentation level in change_huge_pmd()

Patch series "thp: fix few MADV_DONTNEED races"

For MADV_DONTNEED to work properly with huge pages, it's critical to not
clear pmd intermittently unless you hold down_write(mmap_sem).

Otherwise MADV_DONTNEED can miss the THP which can lead to userspace
breakage.

See example of such race in commit message of patch 2/4.

All these races are found by code inspection. I haven't seen them
triggered. I don't think it's worth to apply them to stable@.

This patch (of 4):

Restructure code in preparation for a fix.

Link: http://lkml.kernel.org/r/20170302151034.27829-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

z3fold: fix page locking in z3fold_alloc()

Stress testing of the current z3fold implementation on a 8-core system
revealed it was possible that a z3fold page deleted from its unbuddied
list in z3fold_alloc() would be put on another unbuddied list by
z3fold_free() while z3fold_alloc() is still processing it. This has
been introduced with commit 5a27aa822 ("z3fold: add kref refcounting")
due to the removal of special handling of a z3fold page not on any list
in z3fold_free().

To fix this, the z3fold page lock should be taken in z3fold_alloc()
before the pool lock is released. To avoid deadlocking, we just try to
lock the page as soon as we get a hold of it, and if trylock fails, we
drop this page and take the next one.

Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: <Oleksiy.Avramchenko@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ia64: restore symbol versions for symbols defined in assembly

The ia64 build generates many warnings like this:

WARNING: EXPORT symbol "empty_zero_page" [vmlinux] version generation failed, symbol will not be versioned.

Besides adding the necessary header this also requires fiddling with
some explicit .S -> .o rules.

Cc: IA64-ML <linux-ia64@vger.kernel.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'pinctrl-v4.11-5' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
"Two pin control fixes arriving late, these are hopefully the last pin
  control fixes I send this kernel cycle. A Chromebook and an Exynos SoC
  thingie.

  The Exynos patch is pretty big, it is fixing unbroken a breakage
  caused by yours truly when trying to figure out the merge mess with
  the different Samsung platforms for this merge window. Sorry about
  that. We have countered this situation by assigning a Samsung pin
  control submaintainer to catch stuff earlier.

  Summary:

   - Make the Acer Chromebook keyboard work again with the Intel
     Cherryview driver.

   - Fix a merge error in the Exynos 5433 driver"

* tag 'pinctrl-v4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: cherryview: Add a quirk to make Acer Chromebook keyboard work again
  pinctrl: samsung: Add missing part for PINCFG_TYPE_DRV of Exynos5433

Merge tag 'drm-fixes-for-v4.11-rc7' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
"i915, gvt, nouveau, udl and etnaviv fixes.

  I was away the end of last week, so some of these would have been in
  rc6, and it's Easter from tomorrow, so I decided I better dequeue what
  I have now.

  The nouveau changes, just add a hw enable for GP107 display (like a
  pci id addition really), and fix a couple of regressions. i915 has
  some more gvt fixes, along with a few run of the mill ones, the rcu
  one seems like a few people have hit it.

  Otherwise a small udl and small etnaviv fix"

* tag 'drm-fixes-for-v4.11-rc7' of git://people.freedesktop.org/~airlied/linux: (22 commits)
  drm/etnaviv: fix missing unlock on error in etnaviv_gpu_submit()
  drm/udl: Fix unaligned memory access in udl_render_hline
  drm/i915: Don't call synchronize_rcu_expedited under struct_mutex
  drm/i915: Suspend GuC prior to GPU Reset during GEM suspend
  drm/nouveau: initial support (display-only) for GP107
  drm/nouveau/kms/nv50: fix double dma_fence_put() when destroying plane state
  drm/nouveau/kms/nv50: fix setting of HeadSetRasterVertBlankDmi method
  drm/nouveau/mmu/nv4a: use nv04 mmu rather than the nv44 one
  drm/nouveau/mpeg: mthd returns true on success now
  drm/i915/gvt: set the correct default value of CTX STATUS PTR
  drm/i915/gvt: Fix firmware loading interface for GVT-g golden HW state
  drm/i915: Use a dummy timeline name for a signaled fence
  drm/i915: Ironlake do_idle_maps w/a may be called w/o struct_mutex
  drm/i915/gvt: remove the redundant info NULL check
  drm/i915/gvt: adjust mem size for low resolution type
  drm/i915: Avoid lock dropping between rescheduling
  drm/i915/gvt: exclude cfg space from failsafe mode
  drm/i915/gvt: Activate/de-activate vGPU in mdev ops.
  drm/i915/execlists: Wrap tail pointer after reset tweaking
  drm/i915/perf: remove user triggerable warn
  ...

Merge tag 'pwm/for-4.11-rc7' of git://git./linux/kernel/git/thierry.reding/linux-pwm

Pull pwm fixes from Thierry Reding:
"This contain a fix for the atomic update support recently added to
  the Rockchip driver where the clock reference count would become
  unbalanced and result in the clock feeding the PWM to always be
  disabled.

  Another fix to the Intel LPSS driver that adds an update bit quirk
  required for a specific configuration"

* tag 'pwm/for-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: rockchip: State of PWM clock should synchronize with PWM enabled state
  pwm: lpss: Set enable-bit before waiting for update-bit to go low
  pwm: lpss: Split Tangier configuration

Merge branch 'linux-4.11' of git://github.com/skeggsb/linux into drm-fixes

GP107 modesetting support (just recognising the chipset, no other changes until 4.12)
a couple of regression fixes, one of them a rather serious double-free issue that appeared in 4.10.
* 'linux-4.11' of git://github.com/skeggsb/linux:
  drm/nouveau: initial support (display-only) for GP107
  drm/nouveau/kms/nv50: fix double dma_fence_put() when destroying plane state
  drm/nouveau/kms/nv50: fix setting of HeadSetRasterVertBlankDmi method
  drm/nouveau/mmu/nv4a: use nv04 mmu rather than the nv44 one
  drm/nouveau/mpeg: mthd returns true on success now

Merge tag 'drm-intel-fixes-2017-04-12' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes

drm/i915 fixes for v4.11-rc7

one rcu related fix, and a few GVT fixes.

* tag 'drm-intel-fixes-2017-04-12' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: Don't call synchronize_rcu_expedited under struct_mutex
  drm/i915: Suspend GuC prior to GPU Reset during GEM suspend
  drm/i915/gvt: set the correct default value of CTX STATUS PTR
  drm/i915/gvt: Fix firmware loading interface for GVT-g golden HW state
  drm/i915: Use a dummy timeline name for a signaled fence
  drm/i915: Ironlake do_idle_maps w/a may be called w/o struct_mutex
  drm/i915/gvt: remove the redundant info NULL check
  drm/i915/gvt: adjust mem size for low resolution type
  drm/i915: Avoid lock dropping between rescheduling
  drm/i915/gvt: exclude cfg space from failsafe mode
  drm/i915/gvt: Activate/de-activate vGPU in mdev ops.
  drm/i915/execlists: Wrap tail pointer after reset tweaking
  drm/i915/perf: remove user triggerable warn
  drm/i915/perf: destroy stream on sample_flags mismatch
  drm/i915: Align "unfenced" tiled access on gen2, early gen3

Merge tag 'drm-misc-fixes-2017-04-11' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes

drm-misc-fixes for 2017-04-11

Core changes:
- None

Driver changes
- udl: Fix unaligned memory access on SPARC (Jonathan)

* tag 'drm-misc-fixes-2017-04-11' of git://anongit.freedesktop.org/git/drm-misc:
drm/udl: Fix unaligned memory access in udl_render_hline

Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux into drm-fixes

Single etnaviv error path fix.

* 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux:
drm/etnaviv: fix missing unlock on error in etnaviv_gpu_submit()

mm: Tighten x86 /dev/mem with zeroing reads

Under CONFIG_STRICT_DEVMEM, reading System RAM through /dev/mem is
disallowed. However, on x86, the first 1MB was always allowed for BIOS
and similar things, regardless of it actually being System RAM. It was
possible for heap to end up getting allocated in low 1MB RAM, and then
read by things like x86info or dd, which would trip hardened usercopy:

usercopy: kernel memory exposure attempt detected from ffff880000090000 (dma-kmalloc-256) (4096 bytes)

This changes the x86 exception for the low 1MB by reading back zeros for
System RAM areas instead of blindly allowing them. More work is needed to
extend this to mmap, but currently mmap doesn't go through usercopy, so
hardened usercopy won't Oops the kernel.

Reported-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Tested-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>

drm/etnaviv: fix missing unlock on error in etnaviv_gpu_submit()

Add the missing unlock before return from function etnaviv_gpu_submit()
in the error handling case.

lst: fixed label name.

Fixes: f3cd1b064f11 ("drm/etnaviv: (re-)protect fence allocation with
GPU mutex")
CC: stable@vger.kernel.org #4.9+
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Merge branch 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit

Pull audit fix from Paul Moore:
"One more small audit fix, this should be the last for v4.11.

  Seth Forshee noticed a problem where the audit retry queue wasn't
  being flushed properly when audit was enabled and the audit daemon
  wasn't running; this patches fixes the problem (see the commit
  description for more details on the change).

  Both Seth and I have tested this and everything looks good"

* 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit:
  audit: make sure we don't let the retry queue grow without bounds

Merge git://git./linux/kernel/git/nab/target-pending

Pull SCSI target fixes from Nicholas Bellinger:

"There has been work in a number of different areas over the last
  weeks, including:

   - Fix target-core-user (TCMU) back-end bi-directional handling (Xiubo
     Li + Mike Christie + Ilias Tsitsimpis)

   - Fix iscsi-target TMR reference leak during session shutdown (Rob
     Millner + Chu Yuan Lin)

   - Fix target_core_fabric_configfs.c race between LUN shutdown +
     mapped LUN creation (James Shen)

   - Fix target-core unknown fabric callback queue-full errors (Potnuri
     Bharat Teja)

   - Fix iscsi-target + iser-target queue-full handling in order to
     support iw_cxgb4 RNICs. (Potnuri Bharat Teja + Sagi Grimberg)

   - Fix ALUA transition state race between multiple initiator (Mike
     Christie)

   - Drop work-around for legacy GlobalSAN initiator, to allow QLogic
     57840S + 579xx offload HBAs to work out-of-the-box in MSFT
     environments. (Martin Svec + Arun Easi)

  Note that a number are CC'ed for stable, and although the queue-full
  bug-fixes required for iser-target to work with iw_cxgb4 aren't CC'ed
  here, they'll be posted to Greg-KH separately"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  tcmu: Skip Data-Out blocks before gathering Data-In buffer for BIDI case
  iscsi-target: Drop work-around for legacy GlobalSAN initiator
  target: Fix ALUA transition state race between multiple initiators
  iser-target: avoid posting a recv buffer twice
  iser-target: Fix queue-full response handling
  iscsi-target: Propigate queue_data_in + queue_status errors
  target: Fix unknown fabric callback queue-full errors
  tcmu: Fix wrongly calculating of the base_command_size
  tcmu: Fix possible overwrite of t_data_sg's last iov[]
  target: Avoid mappedlun symlink creation during lun shutdown
  iscsi-target: Fix TMR reference leak during session shutdown
  usb: gadget: Correct usb EP argument for BOT status request
  tcmu: Allow cmd_time_out to be set to zero (disabled)

Merge branch 'for-4.11-fixes' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup fixes from Tejun Heo:
"This contains fixes for two long standing subtle bugs:

   - kthread_bind() on a new kthread binds it to specific CPUs and
     prevents userland from messing with the affinity or cgroup
     membership. Unfortunately, for cgroup membership, there's a window
     between kthread creation and kthread_bind*() invocation where the
     kthread can be moved into a non-root cgroup by userland.

     Depending on what controllers are in effect, this can assign the
     kthread unexpected attributes. For example, in the reported case,
     workqueue workers ended up in a non-root cpuset cgroups and had
     their CPU affinities overridden. This broke workqueue invariants
     and led to workqueue stalls.

     Fixed by closing the window between kthread creation and
     kthread_bind() as suggested by Oleg.

   - There was a bug in cgroup mount path which could allow two
     competing mount attempts to attach the same cgroup_root to two
     different superblocks.

     This was caused by mishandling return value from kernfs_pin_sb().

     Fixed"

* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: avoid attaching a cgroup root to two different superblocks
  cgroup, kthread: close race window where new kthreads can be migrated to non-root cgroups

Merge branch 'for-4.11-fixes' of git://git./linux/kernel/git/tj/libata

Pull libata fixes from Tejun Heo:
"Two libata fixes.

  One to disable hotplug on VT6420 which never worked properly. The
  other reverts an earlier patch which disabled the second port on
  SB600/700. There were some confusions due to earlier datasheets which
  incorrectly indicated that the second port is not implemented on both
  SB600 and 700"

* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  sata_via: Enable hotplug only on VT6421
  Revert "pata_atiixp: Don't use unconnected secondary port on SB600/SB700"

Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

Pull HID fixes from Jiri Kosina:

- revert of a commit that switched all Synaptics touchpads over to be
   driven by hid-rmi. It turns out that this caused several user-visible
   regressions, and therefore we revert back to the original state
   before all the reported issues have been fixed.

- a new uclogic device ID addition, from Xiaolei Yu.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  Revert "HID: rmi: Handle all Synaptics touchpads using hid-rmi"
  HID: uclogic: add support for Ugee Tablet EX07S

drm/udl: Fix unaligned memory access in udl_render_hline

On SPARC, the udl driver filled my kernel log with these messages:

[186668.910612] Kernel unaligned access at TPC[76609c] udl_render_hline+0x13c/0x3a0

Use put_unaligned_be16 to avoid them. On x86 this results in the same
code, but on SPARC the compiler emits two single-byte stores.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170407200229.20642-1-j.neuschaefer@gmx.net

drm/i915: Don't call synchronize_rcu_expedited under struct_mutex

Only call synchronize_rcu_expedited after unlocking struct_mutex to
avoid deadlock because the workqueues depend on struct_mutex.

>From original patch by Andrea:

synchronize_rcu/synchronize_sched/synchronize_rcu_expedited() will
hang until its own workqueues are run. The i915 gem workqueues will
wait on the struct_mutex to be released. So we cannot wait for a
quiescent state using those rcu primitives while holding the
struct_mutex or it creates a circular lock dependency resulting in
kernel hangs (which is reproducible but goes undetected by lockdep).

kswapd0         D    0   700      2 0x00000000
Call Trace:
? __schedule+0x1a5/0x660
? schedule+0x36/0x80
? _synchronize_rcu_expedited.constprop.65+0x2ef/0x300
? wake_up_bit+0x20/0x20
? rcu_stall_kick_kthreads.part.54+0xc0/0xc0
? rcu_exp_wait_wake+0x530/0x530
? i915_gem_shrink+0x34b/0x4b0
? i915_gem_shrinker_scan+0x7c/0x90
? i915_gem_shrinker_scan+0x7c/0x90
? shrink_slab.part.61.constprop.72+0x1c1/0x3a0
? shrink_zone+0x154/0x160
? kswapd+0x40a/0x720
? kthread+0xf4/0x130
? try_to_free_pages+0x450/0x450
? kthread_create_on_node+0x40/0x40
? ret_from_fork+0x23/0x30
plasmashell     D    0  4657   4614 0x00000000
Call Trace:
? __schedule+0x1a5/0x660
? schedule+0x36/0x80
? schedule_preempt_disabled+0xe/0x10
? __mutex_lock.isra.4+0x1c9/0x790
? i915_gem_close_object+0x26/0xc0
? i915_gem_close_object+0x26/0xc0
? drm_gem_object_release_handle+0x48/0x90
? drm_gem_handle_delete+0x50/0x80
? drm_ioctl+0x1fa/0x420
? drm_gem_handle_create+0x40/0x40
? pipe_write+0x391/0x410
? __vfs_write+0xc6/0x120
? do_vfs_ioctl+0x8b/0x5d0
? SyS_ioctl+0x3b/0x70
? entry_SYSCALL_64_fastpath+0x13/0x94
kworker/0:0     D    0 29186      2 0x00000000
Workqueue: events __i915_gem_free_work
Call Trace:
? __schedule+0x1a5/0x660
? schedule+0x36/0x80
? schedule_preempt_disabled+0xe/0x10
? __mutex_lock.isra.4+0x1c9/0x790
? del_timer_sync+0x44/0x50
? update_curr+0x57/0x110
? __i915_gem_free_objects+0x31/0x300
? __i915_gem_free_objects+0x31/0x300
? __i915_gem_free_work+0x2d/0x40
? process_one_work+0x13a/0x3b0
? worker_thread+0x4a/0x460
? kthread+0xf4/0x130
? process_one_work+0x3b0/0x3b0
? kthread_create_on_node+0x40/0x40
? ret_from_fork+0x23/0x30

Fixes: 3d3d18f086cd ("drm/i915: Avoid rcu_barrier() from reclaim paths (shrinker)")
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 8f612d055183545070ca1009ac2eb1f2e044cc20)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Suspend GuC prior to GPU Reset during GEM suspend

i915 is currently doing a full GPU reset at the end of
i915_gem_suspend() followed by GuC suspend in i915_drm_suspend(). This
GPU reset clobbers the GuC, causing the suspend request to then fail,
leaving the GuC in an undefined state. We need to tell the GuC to
suspend before we do the direct intel_gpu_reset().

v2: Commit message update. (Chris, Daniele)

Fixes: 1c777c5d1dcd ("drm/i915/hsw: Fix GPU hang during resume from S3-devices state")
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491387710-20553-1-git-send-email-sagar.a.kamble@intel.com
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit fd08923384385400101c71ac0d21d37d6b23b00d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'gvt-fixes-2017-04-07' of https://github.com/01org/gvt-linux into drm-intel-fixes

gvt-fixes-2017-04-07

- execlist csb initial read ptr fix (Min)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170407084240.4d2ig5ja2umcnsq3@zhen-hp.sh.intel.com

Revert "HID: rmi: Handle all Synaptics touchpads using hid-rmi"

This reverts commit 279967a65b320d174a507498aea7d44db3fee7f4.

Multiple regressions [1] [2] [3] have been reported. The hid-rmi
support would have to fixed and redone in 4.11+.

[1] http://lkml.kernel.org/r/b79b88c8-770a-13f6-5668-c3a94254e5e0@gmail.com
[2] http://lkml.kernel.org/r/375e67b5-2cb8-3491-1d71-d8650d6e9451@gmail.com
[3] https://bugzilla.kernel.org/show_bug.cgi?id=195287

Reported-by: Cameron Gutman <aicommander@gmail.com>
Reported-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Reported-by: Lorenzo J. Lucchini <ljlbox@tiscali.it>
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

pinctrl: cherryview: Add a quirk to make Acer Chromebook keyboard work again

After commit 47c950d10202 ("pinctrl: cherryview: Do not add all
southwest and north GPIOs to IRQ domain") the driver does not add all
GPIOs to the irqdomain. The reason for that is that those GPIOs cannot
generate IRQs at all, only GPEs (General Purpose Events). This causes
Linux virtual IRQ numbering to change.

However, it seems some CYAN Chromebooks, including Acer Chromebook
hardcodes these Linux IRQ numbers in the ACPI tables of the machine.
Since the numbering is different now, the IRQ meant for keyboard does
not match the Linux virtual IRQ number anymore making the keyboard
non-functional.

Work this around by adding special quirk just for these machines where
we add back all GPIOs to the irqdomain. Rest of the Cherryview/Braswell
based machines will not be affected by the change.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=194945
Fixes: 47c950d10202 ("pinctrl: cherryview: Do not add all southwest and north GPIOs to IRQ domain")
Reported-by: Adam S Levy <theadamlevy@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

sata_via: Enable hotplug only on VT6421

Commit 57e5568fda27 ("sata_via: Implement hotplug for VT6421") adds
hotplug IRQ handler for VT6421 but enables hotplug on all chips. This
is a bug because it causes "irq xx: nobody cared" error on VT6420 when
hot-(un)plugging a drive:

[  381.839948] irq 20: nobody cared (try booting with the "irqpoll" option)
[  381.840014] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc5+ #148
[  381.840066] Hardware name:          P4VM800/P4VM800, BIOS P1.60 05/29/2006
[  381.840117] Call Trace:
[  381.840167]  <IRQ>
[  381.840225]  ? dump_stack+0x44/0x58
[  381.840278]  ? __report_bad_irq+0x14/0x97
[  381.840327]  ? handle_edge_irq+0xa5/0xa5
[  381.840376]  ? note_interrupt+0x155/0x1cf
[  381.840426]  ? handle_edge_irq+0xa5/0xa5
[  381.840474]  ? handle_irq_event_percpu+0x32/0x38
[  381.840524]  ? handle_irq_event+0x1f/0x38
[  381.840573]  ? handle_fasteoi_irq+0x69/0xb8
[  381.840625]  ? handle_irq+0x4f/0x5d
[  381.840672]  </IRQ>
[  381.840726]  ? do_IRQ+0x2e/0x8b
[  381.840782]  ? common_interrupt+0x2c/0x34
[  381.840836]  ? mwait_idle+0x60/0x82
[  381.840892]  ? arch_cpu_idle+0x6/0x7
[  381.840949]  ? do_idle+0x96/0x18e
[  381.841002]  ? cpu_startup_entry+0x16/0x1a
[  381.841057]  ? start_kernel+0x319/0x31c
[  381.841111]  ? startup_32_smp+0x166/0x168
[  381.841165] handlers:
[  381.841219] [<c12a7263>] ata_bmdma_interrupt
[  381.841274] Disabling IRQ #20

Seems that VT6420 can do hotplug too (there's no documentation) but the
comments say that SCR register access (required for detecting hotplug
events) can cause problems on these chips.

For now, just keep hotplug disabled on anything other than VT6421.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

cgroup: avoid attaching a cgroup root to two different superblocks

Run this:

    touch file0
    for ((; ;))
    {
        mount -t cpuset xxx file0
    }

And this concurrently:

    touch file1
    for ((; ;))
    {
        mount -t cpuset xxx file1
    }

We'll trigger a warning like this:

------------[ cut here ]------------
WARNING: CPU: 1 PID: 4675 at lib/percpu-refcount.c:317 percpu_ref_kill_and_confirm+0x92/0xb0
percpu_ref_kill_and_confirm called more than once on css_release!
CPU: 1 PID: 4675 Comm: mount Not tainted 4.11.0-rc5+ #5
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
Call Trace:
  dump_stack+0x63/0x84
  __warn+0xd1/0xf0
  warn_slowpath_fmt+0x5f/0x80
  percpu_ref_kill_and_confirm+0x92/0xb0
  cgroup_kill_sb+0x95/0xb0
  deactivate_locked_super+0x43/0x70
  deactivate_super+0x46/0x60
...
---[ end trace a79f61c2a2633700 ]---

Here's a race:

  Thread A Thread B

  cgroup1_mount()
    # alloc a new cgroup root
    cgroup_setup_root()
cgroup1_mount()
  # no sb yet, returns NULL
  kernfs_pin_sb()

  # but succeeds in getting the refcnt,
  # so re-use cgroup root
  percpu_ref_tryget_live()
    # alloc sb with cgroup root
    cgroup_do_mount()

  cgroup_kill_sb()
  # alloc another sb with same root
  cgroup_do_mount()

cgroup_kill_sb()

We end up using the same cgroup root for two different superblocks,
so percpu_ref_kill() will be called twice on the same root when the
two superblocks are destroyed.

We should fix to make sure the superblock pinning is really successful.

Cc: stable@vger.kernel.org # 3.16+
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

virtio-pci: Remove affinity hint before freeing the interrupt

virtio-pci registers a per-vq affinity hint when using MSIX,
but fails to remove it when freeing the interrupt, resulting
in this type of splat:

[   31.111202] WARNING: CPU: 0 PID: 2823 at kernel/irq/manage.c:1503 __free_irq+0x2c4/0x2c8
[   31.114689] Modules linked in:
[   31.116101] CPU: 0 PID: 2823 Comm: kexec Not tainted 4.10.0+ #6941
[   31.118911] Hardware name: Generic DT based system
[   31.121319] [<c022fb78>] (unwind_backtrace) from [<c0229d8c>] (show_stack+0x18/0x1c)
[   31.125017] [<c0229d8c>] (show_stack) from [<c05192f4>] (dump_stack+0x84/0x98)
[   31.128427] [<c05192f4>] (dump_stack) from [<c023d940>] (__warn+0xf4/0x10c)
[   31.131910] [<c023d940>] (__warn) from [<c023da20>] (warn_slowpath_null+0x28/0x30)
[   31.135543] [<c023da20>] (warn_slowpath_null) from [<c0290238>] (__free_irq+0x2c4/0x2c8)
[   31.139355] [<c0290238>] (__free_irq) from [<c02902d0>] (free_irq+0x44/0x78)
[   31.142909] [<c02902d0>] (free_irq) from [<c059d3a8>] (vp_del_vqs+0x68/0x1c0)
[   31.146299] [<c059d3a8>] (vp_del_vqs) from [<c056ca4c>] (pci_device_shutdown+0x3c/0x78)

The obvious fix is to drop the affinity hint before freeing the
interrupt.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Revert "virtio_pci: remove struct virtio_pci_vq_info"

This reverts commit 5c34d002dcc7a6dd665a19d098b4f4cd5501ba1a.

Conflicts:
drivers/virtio/virtio_pci_common.c

The cleanup seems to be one of the changes that broke
hybernation for some users. We are still not sure why
but revert helps.

This reverts the cleanup changes but keeps the affinity support.

Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Revert "virtio_pci: use shared interrupts for virtqueues"

This reverts commit 07ec51480b5eb1233f8c1b0f5d7a7c8d1247c507.

Conflicts:
drivers/virtio/virtio_pci_common.c

Unfortunately the idea does not work with threadirqs
as more than 32 queues can then map to a single interrupts.

Further, the cleanup seems to be one of the changes that broke
hybernation for some users. We are still not sure why
but revert helps.

This reverts the cleanup changes but keeps the affinity support.

Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Revert "virtio_pci: don't duplicate the msix_enable flag in struct pci_dev"

This reverts commit 53a020c661741f3b87ad3ac6fa545088aaebac9b.

The cleanup seems to be one of the changes that broke
hybernation for some users. We are still not sure why
but revert helps.

Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Revert "virtio_pci: simplify MSI-X setup"

This reverts commit 52a61516125fa9a21b3bdf4f90928308e2e5573f.

Conflicts:
drivers/virtio/virtio_pci_common.c

The cleanup seems to be one of the changes that broke
hybernation for some users. We are still not sure why
but revert helps.

This reverts the cleanup changes but keeps the affinity support.

Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Revert "virtio_pci: fix out of bound access for msix_names"

This reverts commit de85ec8b07f82c8c84de7687f769e74bf4c26a1e.

Follow-up patches will revert 07ec51480b5e ("virtio_pci: use shared
interrupts for virtqueues") that triggered the problem so no need for
this one anymore.

Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
"This fixes a number of bugs in the caam driver:

   - device creation fails after release

   - error-path NULL-pointer dereference

   - spurious hardware error in RNG deinstantiation"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: caam - fix RNG deinstantiation error checking
  crypto: caam - fix invalid dereference in caam_rsa_init_tfm()
  crypto: caam - fix JR platform device subsequent (re)creations

audit: make sure we don't let the retry queue grow without bounds

The retry queue is intended to provide a temporary buffer in the case
of transient errors when communicating with auditd, it is not meant
as a long life queue, that functionality is provided by the hold
queue.

This patch fixes a problem identified by Seth where the retry queue
could grow uncontrollably if an auditd instance did not connect to
the kernel to drain the queues.  This commit fixes this by doing the
following:

* Make sure we always call auditd_reset() if we decide the connection
with audit is really dead.  There were some cases in
kauditd_hold_skb() where we did not reset the connection, this patch
relocates the reset calls to kauditd_thread() so all the error
conditions are caught and the connection reset.  As a side effect,
this means we could move auditd_reset() and get rid of the forward
definition at the top of kernel/audit.c.

* We never checked the status of the auditd connection when
processing the main audit queue which meant that the retry queue
could grow unchecked.  This patch adds a call to auditd_reset()
after the main queue has been processed if auditd is not connected,
the auditd_reset() call will make sure the retry and hold queues are
correctly managed/flushed so that the retry queue remains reasonable.

Cc: <stable@vger.kernel.org> # 4.10.x-: 5b52330bbfe6
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

pinctrl: samsung: Add missing part for PINCFG_TYPE_DRV of Exynos5433

The commit 1259feddd0f8("pinctrl: samsung: Fix the width of
PINCFG_TYPE_DRV bitfields for Exynos5433") already fixed
the different width of PINCFG_TYPE_DRV from previous Exynos SoC.

However wrong merge conflict resolution was chosen in commit
7f36f5d11cda ("Merge tag 'v4.10-rc6' into devel") effectively dropping
the changes for PINCFG_TYPE_DRV. Re-do them here.

The macro EXYNOS_PIN_BANK_EINTW is no longer used so remove it.

Fixes: 7f36f5d11cda ("Merge tag 'v4.10-rc6' into devel")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Linux 4.11-rc6

Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6

Pull CIFS fixes from Steve French:
"This is a set of CIFS/SMB3 fixes for stable.

  There is another set of four SMB3 reconnect fixes for stable in
  progress but they are still being reviewed/tested, so didn't want to
  wait any longer to send these five below"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  Reset TreeId to zero on SMB2 TREE_CONNECT
  CIFS: Fix build failure with smb2
  Introduce cifs_copy_file_range()
  SMB3: Rename clone_range to copychunk_range
  Handle mismatched open calls

Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
"A number of ARM fixes:

   - prevent oopses caused by dma_get_sgtable() and declared DMA
     coherent memory

   - fix boot failure on nommu caused by ID_PFR1 access

   - a number of kprobes fixes from Jon Medhurst and Masami Hiramatsu"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8665/1: nommu: access ID_PFR1 only if CPUID scheme
  ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory
  arm: kprobes: Align stack to 8-bytes in test code
  arm: kprobes: Fix the return address of multiple kretprobes
  arm: kprobes: Skip single-stepping in recursing path if possible
  arm: kprobes: Allow to handle reentered kprobe on single-stepping

Merge tag 'driver-core-4.11-rc6' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
"Here are 3 small fixes for 4.11-rc6.

  One resolves a reported issue with sysfs files that NeilBrown found,
  one is a documenatation fix for the stable kernel rules, and the last
  is a small MAINTAINERS file update for kernfs"

* tag 'driver-core-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  MAINTAINERS: separate out kernfs maintainership
  sysfs: be careful of error returns from ops->show()
  Documentation: stable-kernel-rules: fix stable-tag format

Merge tag 'staging-4.11-rc6' of git://git./linux/kernel/git/gregkh/staging

Pull staging/IIO driver rfixes from Greg KH:
"Here are a number of small IIO and staging driver fixes for 4.11-rc6.
  Nothing big here, just iio fixes for reported issues, and an ashmem
  fix for a very old bug that has been reported by a number of Android
  vendors"

* tag 'staging-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: android: ashmem: lseek failed due to no FMODE_LSEEK.
  iio: hid-sensor-attributes: Fix sensor property setting failure.
  iio: accel: hid-sensor-accel-3d: Fix duplicate scan index error
  iio: core: Fix IIO_VAL_FRACTIONAL_LOG2 for negative values
  iio: st_pressure: initialize lps22hb bootime
  iio: bmg160: reset chip when probing
  iio: cros_ec_sensors: Fix return value to get raw and calibbias data.

Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

Pull VFS fixes from Al Viro:
"statx followup fixes and a fix for stack-smashing on alpha"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  alpha: fix stack smashing in old_adjtimex(2)
  statx: Include a mask for stx_attributes in struct statx
  statx: Reserve the top bit of the mask for future struct expansion
  xfs: report crtime and attribute flags to statx
  ext4: Add statx support
  statx: optimize copy of struct statx to userspace
  statx: remove incorrect part of vfs_statx() comment
  statx: reject unknown flags when using NULL path
  Documentation/filesystems: fix documentation for ->getattr()

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"Here's a pull request for 4.11-rc, fixing a set of issues mostly
  centered around the new scheduling framework. These have been brewing
  for a while, but split up into what we absolutely need in 4.11, and
  what we can defer until 4.12. These are well tested, on both single
  queue and multiqueue setups, and with and without shared tags. They
  fix several hangs that have happened in testing.

  This is obviously larger than I would have preferred at this point in
  time, but I don't think we can shave much off this and still get the
  desired results.

  In detail, this pull request contains:

   - a set of five fixes for NVMe, mostly from Christoph and one from
     Roland.

   - a series from Bart, fixing issues with dm-mq and SCSI shared tags
     and scheduling. Note that one of those patches commit messages may
     read like an optimization, but it is in fact an important fix for
     queue restarts in particular.

   - a series from Omar, most importantly fixing a hang with multiple
     hardware queues when we fail to get a driver tag. Another important
     fix in there is for resizing hardware queues, which nbd does when
     handling multiple sockets for one connection.

   - fixing an imbalance in putting the ctx for hctx request allocations
     from Minchan"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: Restart a single queue if tag sets are shared
  dm rq: Avoid that request processing stalls sporadically
  scsi: Avoid that SCSI queues get stuck
  blk-mq: Introduce blk_mq_delay_run_hw_queue()
  blk-mq: remap queues when adding/removing hardware queues
  blk-mq-sched: fix crash in switch error path
  blk-mq-sched: set up scheduler tags when bringing up new queues
  blk-mq-sched: refactor scheduler initialization
  blk-mq: use the right hctx when getting a driver tag fails
  nvmet: fix byte swap in nvmet_parse_io_cmd
  nvmet: fix byte swap in nvmet_execute_write_zeroes
  nvmet: add missing byte swap in nvmet_get_smart_log
  nvme: add missing byte swap in nvme_setup_discard
  nvme: Correct NVMF enum values to match NVMe-oF rev 1.0
  block: do not put mq context in blk_mq_alloc_request_hctx

Merge tag 'pinctrl-v4.11-4' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fix from Linus Walleij:
"This late fix for pin control is hopefully the last I send this cycle.

  The problem was detected early in the v4.11 release cycle and there
  has been some back and forth on how to solve it. Sadly the proper fix
  arrives late, but at least not too late.

  An issue was detected with pin control on the Freescale i.MX after the
  refactorings for more general group and function handling.

  We now have the proper fix for this"

* tag 'pinctrl-v4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()

Merge tag 'powerpc-4.11-7' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 4.11:

  Headed to stable:

   - disable HFSCR[TM] if TM is not supported, fixes a potential host
     kernel crash triggered by a hostile guest, but only in
     configurations that no one uses

   - don't try to fix up misaligned load-with-reservation instructions

   - fix flush_(d|i)cache_range() called from modules on little endian
     kernels

   - add missing global TLB invalidate if cxl is active

   - fix missing preempt_disable() in crc32c-vpmsum

  And a fix for selftests build changes that went in this release:

   - selftests/powerpc: Fix standalone powerpc build

  Thanks to: Benjamin Herrenschmidt, Frederic Barrat, Oliver O'Halloran,
  Paul Mackerras"

* tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/crypto/crc32c-vpmsum: Fix missing preempt_disable()
  powerpc/mm: Add missing global TLB invalidate if cxl is active
  powerpc/64: Fix flush_(d|i)cache_range() called from modules
  powerpc: Don't try to fix up misaligned load-with-reservation instructions
  powerpc: Disable HFSCR[TM] if TM is not supported
  selftests/powerpc: Fix standalone powerpc build

mm/mempolicy.c: fix error handling in set_mempolicy and mbind.

In the case that compat_get_bitmap fails we do not want to copy the
bitmap to the user as it will contain uninitialized stack data and leak
sensitive data.

Signed-off-by: Chris Salls <salls@cs.ucsb.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: report EINVAL if value is larger than UINT_MAX for proc_douintvec

Currently, inputting the following command will succeed but actually the
value will be truncated:

# echo 0x12ffffffff > /proc/sys/net/ipv4/tcp_notsent_lowat

This is not friendly to the user, so instead, we should report error
when the value is larger than UINT_MAX.

Fixes: e7d316a02f68 ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: separate out kernfs maintainership

Separate out kernfs from driver core and add myself as a
co-maintainer.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sysfs: be careful of error returns from ops->show()

ops->show() can return a negative error code.
Commit 65da3484d9be ("sysfs: correctly handle short reads on PREALLOC attrs.")
(in v4.4) caused this to be stored in an unsigned 'size_t' variable, so errors
would look like large numbers.
As a result, if an error is returned, sysfs_kf_read() will return the
value of 'count', typically 4096.

Commit 17d0774f8068 ("sysfs: correctly handle read offset on PREALLOC attrs")
(in v4.8) extended this error to use the unsigned large 'len' as a size for
memmove().
Consequently, if ->show returns an error, then the first read() on the
sysfs file will return 4096 and could return uninitialized memory to
user-space.
If the application performs a subsequent read, this will trigger a memmove()
with extremely large count, and is likely to crash the machine is bizarre ways.

This bug can currently only be triggered by reading from an md
sysfs attribute declared with __ATTR_PREALLOC() during the
brief period between when mddev_put() deletes an mddev from
the ->all_mddevs list, and when mddev_delayed_delete() - which is
scheduled on a workqueue - completes.
Before this, an error won't be returned by the ->show()
After this, the ->show() won't be called.

I can reproduce it reliably only by putting delay like
usleep_range(500000,700000);
early in mddev_delayed_delete(). Then after creating an
md device md0 run
echo clear > /sys/block/md0/md/array_state; cat /sys/block/md0/md/array_state

The bug can be triggered without the usleep.

Fixes: 65da3484d9be ("sysfs: correctly handle short reads on PREALLOC attrs.")
Fixes: 17d0774f8068 ("sysfs: correctly handle read offset on PREALLOC attrs")
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: stable-kernel-rules: fix stable-tag format

A patch documenting how to specify which kernels a particular fix should
be backported to (seemingly) inadvertently added a minus sign after the
kernel version. This particular stable-tag format had never been used
prior to this patch, and was neither present when the patch in question
was first submitted (it was added in v2 without any comment).

Drop the minus sign to avoid any confusion.

Fixes: fdc81b7910ad ("stable_kernel_rules: Add clause about specification of kernel versions to patch.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ashmem: lseek failed due to no FMODE_LSEEK.

vfs_llseek will check whether the file mode has
FMODE_LSEEK, no return failure. But ashmem can be
lseek, so add FMODE_LSEEK to ashmem file.

Comment From Greg Hackmann:
ashmem_llseek() passes the llseek() call through to the backing
shmem file. 91360b02ab48 ("ashmem: use vfs_llseek()") changed
this from directly calling the file's llseek() op into a VFS
layer call. This also adds a check for the FMODE_LSEEK bit, so
without that bit ashmem_llseek() now always fails with -ESPIPE.

Fixes: 91360b02ab48 ("ashmem: use vfs_llseek()")
Signed-off-by: Shuxiao Zhang <zhangshuxiao@xiaomi.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Cc: stable <stable@vger.kernel.org> # 3.18+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge git://git./linux/kernel/git/davem/sparc

Pull sparc fixes from David Miller:
"Several fixes here, mostly having to due with either build errors or
  memory corruptions depending upon whether you have THP enabled or not"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: remove unused wp_works_ok macro
  sparc32: Export vac_cache_size to fix build error
  sparc64: Fix memory corruption when THP is enabled
  sparc64: Fix kernel panic due to erroneous #ifdef surrounding pmd_write()
  arch/sparc: Avoid DCTI Couples
  sparc64: kern_addr_valid regression
  sparc64: Add support for 2G hugepages
  sparc64: Fix size check in huge_pte_alloc

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Radim Krčmář:
"ARM:
   - Fix a problem with GICv3 userspace save/restore
   - Clarify GICv2 userspace save/restore ABI
   - Be more careful in clearing GIC LRs
   - Add missing synchronization primitive to our MMU handling code

  PPC:
   - Check for a NULL return from kzalloc

  s390:
   - Prevent translation exception errors on valid page tables for the
     instruction-exection-protection support

  x86:
   - Fix Page-Modification Logging when running a nested guest"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: Book3S HV: Check for kmalloc errors in ioctl
  KVM: nVMX: initialize PML fields in vmcs02
  KVM: nVMX: do not leak PML full vmexit to L1
  KVM: arm/arm64: vgic: Fix GICC_PMR uaccess on GICv3 and clarify ABI
  KVM: arm64: Ensure LRs are clear when they should be
  kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd
  KVM: s390: remove change-recording override support
  arm/arm64: KVM: Take mmap_sem in kvm_arch_prepare_memory_region
  arm/arm64: KVM: Take mmap_sem in stage2_unmap_vm

Merge branch 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit

Pull audit cleanup from Paul Moore:
"A week later than I had hoped, but as promised, here is the audit
  uninline-fix we talked about during the last audit pull request.

  The patch is slightly different than what we originally discussed as
  it made more sense to keep the audit_signal_info() function in
  auditsc.c rather than move it and bunch of other related
  variables/definitions into audit.c/audit.h.

  At some point in the future I need to look at how the audit code is
  organized across kernel/audit*, I suspect we could do things a bit
  better, but it doesn't seem like a -rc release is a good place for
  that ;)

  Regardless, this patch passes our tests without problem and looks good
  for v4.11"

* 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit:
  audit: move audit_signal_info() into kernel/auditsc.c

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"10 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: move pcp and lru-pcp draining into single wq
  mailmap: update Yakir Yang email address
  mm, swap_cgroup: reschedule when neeed in swap_cgroup_swapoff()
  dax: fix radix tree insertion race
  mm, thp: fix setting of defer+madvise thp defrag mode
  ptrace: fix PTRACE_LISTEN race corrupting task->state
  vmlinux.lds: add missing VMLINUX_SYMBOL macros
  mm/page_alloc.c: fix print order in show_free_areas()
  userfaultfd: report actual registered features in fdinfo
  mm: fix page_vma_mapped_walk() for ksm pages

mm: move pcp and lru-pcp draining into single wq

We currently have 2 specific WQ_RECLAIM workqueues in the mm code.
vmstat_wq for updating pcp stats and lru_add_drain_wq dedicated to drain
per cpu lru caches.  This seems more than necessary because both can run
on a single WQ.  Both do not block on locks requiring a memory
allocation nor perform any allocations themselves.  We will save one
rescuer thread this way.

On the other hand drain_all_pages() queues work on the system wq which
doesn't have rescuer and so this depend on memory allocation (when all
workers are stuck allocating and new ones cannot be created).

Initially we thought this would be more of a theoretical problem but
Hugh Dickins has reported:

: 4.11-rc has been giving me hangs after hours of swapping load.  At
: first they looked like memory leaks ("fork: Cannot allocate memory");
: but for no good reason I happened to do "cat /proc/sys/vm/stat_refresh"
: before looking at /proc/meminfo one time, and the stat_refresh stuck
: in D state, waiting for completion of flush_work like many kworkers.
: kthreadd waiting for completion of flush_work in drain_all_pages().

This worker should be using WQ_RECLAIM as well in order to guarantee a
forward progress.  We can reuse the same one as for lru draining and
vmstat.

Link: http://lkml.kernel.org/r/20170307131751.24936-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Yang Li <pku.leo@gmail.com>
Tested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mailmap: update Yakir Yang email address

Set current email address to replace previous employers email addresses.

Link: http://lkml.kernel.org/r/1491450722-6633-1-git-send-email-jeffy.chen@rock-chips.com
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, swap_cgroup: reschedule when neeed in swap_cgroup_swapoff()

We got need_resched() warnings in swap_cgroup_swapoff() because
swap_cgroup_ctrl[type].length is particularly large.

Reschedule when needed.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1704061315270.80559@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dax: fix radix tree insertion race

While running generic/340 in my test setup I hit the following race.  It
can happen with kernels that support FS DAX PMDs, so v4.10 thru
v4.11-rc5.

Thread 1 Thread 2
-------- --------
dax_iomap_pmd_fault()
  grab_mapping_entry()
    spin_lock_irq()
    get_unlocked_mapping_entry()
    'entry' is NULL, can't call lock_slot()
    spin_unlock_irq()
    radix_tree_preload()
dax_iomap_pmd_fault()
  grab_mapping_entry()
    spin_lock_irq()
    get_unlocked_mapping_entry()
    ...
    lock_slot()
    spin_unlock_irq()
  dax_pmd_insert_mapping()
    <inserts a PMD mapping>
    spin_lock_irq()
    __radix_tree_insert() fails with -EEXIST
    <fall back to 4k fault, and die horribly
     when inserting a 4k entry where a PMD exists>

The issue is that we have to drop mapping->tree_lock while calling
radix_tree_preload(), but since we didn't have a radix tree entry to
lock (unlike in the pmd_downgrade case) we have no protection against
Thread 2 coming along and inserting a PMD at the same index.  For 4k
entries we handled this with a special-case response to -EEXIST coming
from the __radix_tree_insert(), but this doesn't save us for PMDs
because the -EEXIST case can also mean that we collided with a 4k entry
in the radix tree at a different index, but one that is covered by our
PMD range.

So, correctly handle both the 4k and 2M collision cases by explicitly
re-checking the radix tree for an entry at our index once we reacquire
mapping->tree_lock.

This patch has made it through a clean xfstests run with the current
v4.11-rc5 based linux/master, and it also ran generic/340 500 times in a
loop.  It used to fail within the first 10 iterations.

Link: http://lkml.kernel.org/r/20170406212944.2866-1-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: <stable@vger.kernel.org> [4.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, thp: fix setting of defer+madvise thp defrag mode

Setting thp defrag mode of "defer+madvise" actually sets "defer" in the
kernel due to the name similarity and the out-of-order way the string is
checked in defrag_store().

Check the string in the correct order so that
TRANSPARENT_HUGEPAGE_DEFRAG_KSWAPD_OR_MADV_FLAG is set appropriately for
"defer+madvise".

Fixes: 21440d7eb904 ("mm, thp: add new defer+madvise defrag option")
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1704051814420.137626@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ptrace: fix PTRACE_LISTEN race corrupting task->state

In PT_SEIZED + LISTEN mode STOP/CONT signals cause a wakeup against
__TASK_TRACED.  If this races with the ptrace_unfreeze_traced at the end
of a PTRACE_LISTEN, this can wake the task /after/ the check against
__TASK_TRACED, but before the reset of state to TASK_TRACED.  This
causes it to instead clobber TASK_WAKING, allowing a subsequent wakeup
against TRACED while the task is still on the rq wake_list, corrupting
it.

Oleg said:
"The kernel can crash or this can lead to other hard-to-debug problems.
  In short, "task->state = TASK_TRACED" in ptrace_unfreeze_traced()
  assumes that nobody else can wake it up, but PTRACE_LISTEN breaks the
  contract. Obviusly it is very wrong to manipulate task->state if this
  task is already running, or WAKING, or it sleeps again"

[akpm@linux-foundation.org: coding-style fixes]
Fixes: 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL")
Link: http://lkml.kernel.org/r/xm26y3vfhmkp.fsf_-_@bsegall-linux.mtv.corp.google.com
Signed-off-by: Ben Segall <bsegall@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmlinux.lds: add missing VMLINUX_SYMBOL macros

When __{start,end}_ro_after_init is referenced from C code, we run into
the following build errors on blackfin:

kernel/extable.c:169: undefined reference to `__start_ro_after_init'
kernel/extable.c:169: undefined reference to `__end_ro_after_init'

The build error is due to the fact that blackfin is one of the few
arches that prepends an underscore '_' to all symbols defined in C.

Fix this by wrapping __{start,end}_ro_after_init in vmlinux.lds.h with
VMLINUX_SYMBOL(), which adds the necessary prefix for arches that have
HAVE_UNDERSCORE_SYMBOL_PREFIX.

Link: http://lkml.kernel.org/r/1491259387-15869-1-git-send-email-jeyu@redhat.com
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Eddie Kovsky <ewk@edkovsky.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: fix print order in show_free_areas()

Fixes: 11fb998986a72a ("mm: move most file-based accounting to the node")
Link: http://lkml.kernel.org/r/1490377730.30219.2.camel@beget.ru
Signed-off-by: Alexander Polyakov <apolyakov@beget.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

userfaultfd: report actual registered features in fdinfo

fdinfo for userfault file descriptor reports UFFD_API_FEATURES.  Up
until recently, the UFFD_API_FEATURES was defined as 0, therefore
corresponding field in fdinfo always contained zero.  Now, with
introduction of several additional features, UFFD_API_FEATURES is not
longer 0 and it seems better to report actual features requested for the
userfaultfd object described by the fdinfo.

First, the applications that were using userfault will still see zero at
the features field in fdinfo.  Next, reporting actual features rather
than available features, gives clear indication of what userfault
features are used by an application.

Link: http://lkml.kernel.org/r/1491140181-22121-1-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix page_vma_mapped_walk() for ksm pages

Doug Smythies reports oops with KSM in this backtrace, I've been seeing
the same:

  page_vma_mapped_walk+0xe6/0x5b0
  page_referenced_one+0x91/0x1a0
  rmap_walk_ksm+0x100/0x190
  rmap_walk+0x4f/0x60
  page_referenced+0x149/0x170
  shrink_active_list+0x1c2/0x430
  shrink_node_memcg+0x67a/0x7a0
  shrink_node+0xe1/0x320
  kswapd+0x34b/0x720

Just as observed in commit 4b0ece6fa016 ("mm: migrate: fix
remove_migration_pte() for ksm pages"), you cannot use page->index
calculations on ksm pages.

page_vma_mapped_walk() is relying on __vma_address(), where a ksm page
can lead it off the end of the page table, and into whatever nonsense is
in the next page, ending as an oops inside check_pte()'s pte_page().

KSM tells page_vma_mapped_walk() exactly where to look for the page, it
does not need any page->index calculation: and that's so also for all
the normal and file and anon pages - just not for THPs and their
subpages.  Get out early in most cases: instead of a PageKsm test, move
down the earlier not-THP-page test, as suggested by Kirill.

I'm also slightly worried that this loop can stray into other vmas, so
added a vm_end test to prevent surprises; though I have not imagined
anything worse than a very contrived case, in which a page mlocked in
the next vma might be reclaimed because it is not mlocked in this vma.

Fixes: ace71a19cec5 ("mm: introduce page_vma_mapped_walk()")
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1704031104400.1118@eggly.anvils
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

orangefs: move features validation to fix filesystem hang

Without this fix (and another to the userspace component itself
described later), the kernel will be unable to process any OrangeFS
requests after the userspace component is restarted (due to a crash or
at the administrator's behest).

The bug here is that inside orangefs_remount, the orangefs_request_mutex
is locked.  When the userspace component restarts while the filesystem
is mounted, it sends a ORANGEFS_DEV_REMOUNT_ALL ioctl to the device,
which causes the kernel to send it a few requests aimed at synchronizing
the state between the two.  While this is happening the
orangefs_request_mutex is locked to prevent any other requests going
through.

This is only half of the bugfix.  The other half is in the userspace
component which outright ignores(!) requests made before it considers
the filesystem remounted, which is after the ioctl returns.  Of course
the ioctl doesn't return until after the userspace component responds to
the request it ignores.  The userspace component has been changed to
allow ORANGEFS_VFS_OP_FEATURES regardless of the mount status.

Mike Marshall says:
"I've tested this patch against the fixed userspace part. This patch is
  real important, I hope it can make it into 4.11...

  Here's what happens when the userspace daemon is restarted, without
  the patch:

    =============================================
    [ INFO: possible recursive locking detected ]
    [   4.10.0-00007-ge98bdb3 #1 Not tainted    ]
    ---------------------------------------------
    pvfs2-client-co/29032 is trying to acquire lock:
     (orangefs_request_mutex){+.+.+.}, at: service_operation+0x3c7/0x7b0 [orangefs]
                  but task is already holding lock:
     (orangefs_request_mutex){+.+.+.}, at: dispatch_ioctl_command+0x1bf/0x330 [orangefs]

    CPU: 0 PID: 29032 Comm: pvfs2-client-co Not tainted 4.10.0-00007-ge98bdb3 #1
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.fc25 04/01/2014
    Call Trace:
     __lock_acquire+0x7eb/0x1290
     lock_acquire+0xe8/0x1d0
     mutex_lock_killable_nested+0x6f/0x6e0
     service_operation+0x3c7/0x7b0 [orangefs]
     orangefs_remount+0xea/0x150 [orangefs]
     dispatch_ioctl_command+0x227/0x330 [orangefs]
     orangefs_devreq_ioctl+0x29/0x70 [orangefs]
     do_vfs_ioctl+0xa3/0x6e0
     SyS_ioctl+0x79/0x90"

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Acked-by: Mike Marshall <hubcap@omnibond.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'pci-v4.11-fixes-4' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:

- fix ThunderX legacy firmware resources

- fix ARTPEC-6 and DesignWare platform driver NULL pointer dereferences

- fix HiSilicon link error

* tag 'pci-v4.11-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: dwc: Fix dw_pcie_ops NULL pointer dereference
  PCI: dwc: Select PCI_HOST_COMMON for hisi
  PCI: thunder-pem: Fix legacy firmware PEM-specific resources

blk-mq: Restart a single queue if tag sets are shared

To improve scalability, if hardware queues are shared, restart
a single hardware queue in round-robin fashion. Rename
blk_mq_sched_restart_queues() to reflect the new semantics.
Remove blk_mq_sched_mark_restart_queue() because this function
has no callers. Remove flag QUEUE_FLAG_RESTART because this
patch removes the code that uses this flag.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

dm rq: Avoid that request processing stalls sporadically

While running the srp-test software I noticed that request
processing stalls sporadically at the beginning of a test, namely
when mkfs is run against a dm-mpath device. Every time when that
happened the following command was sufficient to resume request
processing:

echo run >/sys/kernel/debug/block/dm-0/state

This patch avoids that such request processing stalls occur. The
test I ran is as follows:

while srp-test/run_tests -d -r 30 -t 02-mq; do :; done

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: Jens Axboe <axboe@fb.com>

scsi: Avoid that SCSI queues get stuck

If a .queue_rq() function returns BLK_MQ_RQ_QUEUE_BUSY then the block
driver that implements that function is responsible for rerunning the
hardware queue once requests can be queued again successfully.

commit 52d7f1b5c2f3 ("blk-mq: Avoid that requeueing starts stopped
queues") removed the blk_mq_stop_hw_queue() call from scsi_queue_rq()
for the BLK_MQ_RQ_QUEUE_BUSY case. Hence change all calls to functions
that are intended to rerun a busy queue such that these examine all
hardware queues instead of only stopped queues.

Since no other functions than scsi_internal_device_block() and
scsi_internal_device_unblock() should ever stop or restart a SCSI
queue, change the blk_mq_delay_queue() call into a
blk_mq_delay_run_hw_queue() call.

Fixes: commit 52d7f1b5c2f3 ("blk-mq: Avoid that requeueing starts stopped queues")
Fixes: commit 7e79dadce222 ("blk-mq: stop hardware queue in blk_mq_delay_queue()")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Long Li <longli@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

blk-mq: Introduce blk_mq_delay_run_hw_queue()

Introduce a function that runs a hardware queue unconditionally
after a delay. Note: there is already a function that stops and
restarts a hardware queue after a delay, namely blk_mq_delay_queue().

This function will be used in the next patch in this series.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Long Li <longli@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Merge tag 'dm-4.11-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

- two stable fixes for the verity target's FEC support

- a stable fix for raid target's raid1 support (when no bitmap is used)

- a 4.11 cache metadata v2 format fix to properly test blocks are clean

* tag 'dm-4.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm verity fec: fix bufio leaks
  dm raid: fix NULL pointer dereference for raid1 without bitmap
  dm cache metadata: fix metadata2 format's blocks_are_clean_separate_dirty
  dm verity fec: limit error correction recursion

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
"We've got a regression fix for the signal raised when userspace makes
  an unsupported unaligned access and a revert of the contiguous
  (hugepte) support for hugetlb, which has once again been found to be
  broken. One day, maybe, we'll get it right.

  Summary:

   - restore previous SIGBUS behaviour for unhandled unaligned user
     accesses

   - revert broken support for the contiguous bit in hugetlb (again...)"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  Revert "Revert "arm64: hugetlb: partial revert of 66b3923a1a0f""
  arm64: mm: unaligned access by user-land should be received as SIGBUS

Merge tag 'metag-for-v4.11-rc6' of git://git./linux/kernel/git/jhogan/metag

Pull metag usercopy fixes from James Hogan:
"Metag usercopy fault handling fixes

  These patches fix a bunch of longstanding (some over a decade old)
  metag user copy fault handling bugs. Thanks go to Al Viro for spotting
  some of the questionable code in the first place"

* tag 'metag-for-v4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag/usercopy: Add missing fixups
  metag/usercopy: Fix src fixup in from user rapf loops
  metag/usercopy: Set flags before ADDZ
  metag/usercopy: Zero rest of buffer from copy_from_user
  metag/usercopy: Add early abort to copy_to_user
  metag/usercopy: Fix alignment error checking
  metag/usercopy: Drop unused macros

Merge tag 'acpi-4.11-rc6' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
"This fixes a core device enumeration code change made in 4.10, in
  order to address a reported issue, that went too far.

  Specifics:

   - Refine the check for the existence of _HID in find_child_checks()
     so that it doesn't trigger for device objects with device IDs made
     up by the kernel (Rafael Wysocki)"

* tag 'acpi-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / scan: Prefer devices without _HID for _ADR matching

Merge tag 'for-linus-4.11b-rc6-tag' of git://git./linux/kernel/git/xen/tip

Pull Xen fix from Juergen Gross:
"A fix for error path cleanup in the xenbus handler"

* tag 'for-linus-4.11b-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xenbus: remove transaction holder from list before freeing

sysctl: don't print negative flag for proc_douintvec

I saw some very confusing sysctl output on my system:
  # cat /proc/sys/net/core/xfrm_aevent_rseqth
  -2
  # cat /proc/sys/net/core/xfrm_aevent_etime
  -10
  # cat /proc/sys/net/ipv4/tcp_notsent_lowat
  -4294967295

Because we forget to set the *negp flag in proc_douintvec, so it will
become a garbage value.

Since the value related to proc_douintvec is always an unsigned integer,
so we can set *negp to false explictily to fix this issue.

Fixes: e7d316a02f68 ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: add sanity check for proc_douintvec

Commit e7d316a02f68 ("sysctl: handle error writing UINT_MAX to u32
fields") introduced the proc_douintvec helper function, but it forgot to
add the related sanity check when doing register_sysctl_table. So add
it now.

Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

blk-mq: remap queues when adding/removing hardware queues

blk_mq_update_nr_hw_queues() used to remap hardware queues, which is the
behavior that drivers expect. However, commit 4e68a011428a changed
blk_mq_queue_reinit() to not remap queues for the case of CPU
hotplugging, inadvertently making blk_mq_update_nr_hw_queues() not remap
queues as well. This breaks, for example, NBD's multi-connection mode,
leaving the added hardware queues unused. Fix it by making
blk_mq_update_nr_hw_queues() explicitly remap the queues.

Fixes: 4e68a011428a ("blk-mq: don't redistribute hardware queues on a CPU hotplug event")
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

blk-mq-sched: fix crash in switch error path

In elevator_switch(), if blk_mq_init_sched() fails, we attempt to fall
back to the original scheduler. However, at this point, we've already
torn down the original scheduler's tags, so this causes a crash. Doing
the fallback like the legacy elevator path is much harder for mq, so fix
it by just falling back to none, instead.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

blk-mq-sched: set up scheduler tags when bringing up new queues

If a new hardware queue is added at runtime, we don't allocate scheduler
tags for it, leading to a crash. This hooks up the scheduler framework
to blk_mq_{init,exit}_hctx() to make sure everything gets properly
initialized/freed.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

blk-mq-sched: refactor scheduler initialization

Preparation cleanup for the next couple of fixes, push
blk_mq_sched_setup() and e->ops.mq.init_sched() into a helper.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

blk-mq: use the right hctx when getting a driver tag fails

While dispatching requests, if we fail to get a driver tag, we mark the
hardware queue as waiting for a tag and put the requests on a
hctx->dispatch list to be run later when a driver tag is freed. However,
blk_mq_dispatch_rq_list() may dispatch requests from multiple hardware
queues if using a single-queue scheduler with a multiqueue device. If
blk_mq_get_driver_tag() fails, it doesn't update the hardware queue we
are processing. This means we end up using the hardware queue of the
previous request, which may or may not be the same as that of the
current request. If it isn't, the wrong hardware queue will end up
waiting for a tag, and the requests will be on the wrong dispatch list,
leading to a hang.

The fix is twofold:

1. Make sure we save which hardware queue we were trying to get a
   request for in blk_mq_get_driver_tag() regardless of whether it
   succeeds or not.
2. Make blk_mq_dispatch_rq_list() take a request_queue instead of a
   blk_mq_hw_queue to make it clear that it must handle multiple
   hardware queues, since I've already messed this up on a couple of
   occasions.

This didn't appear in testing with nvme and mq-deadline because nvme has
more driver tags than the default number of scheduler tags. However,
with the blk_mq_update_nr_hw_queues() fix, it showed up with nbd.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

MAINTAINERS: fix virtio file pattern

The pattern did not catch include/linux/virtio.h.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio_console: fix uninitialized variable use

We try to disable callbacks on c_ivq even without multiport
even though that vq is not initialized in this configuration.

Fixes: c743d09dbd01 ("virtio: console: Disable callbacks for virtqueues at start of S4 freeze")
Suggested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio_net: clear MTU when out of range

virtio attempts to clear the MTU feature bit if the value is out of the
supported range, but this has no real effect since FEATURES_OK has
already been set.

Fix this up by checking the MTU in the new validate callback.

Fixes: 14de9d114a82 ("virtio-net: Add initial MTU advice feature")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio: allow drivers to validate features

Some drivers can't support all features in all configurations. At the
moment we blindly set FEATURES_OK and later FAILED. Support this better
by adding a callback drivers can use to do some early checks.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio_net: enable big packets for large MTU values

If one enables e.g. jumbo frames without mergeable
buffers, packets won't fit in 1500 byte buffers
we use. Switch to big packet mode instead.
TODO: make sizing more exact, possibly extend small
packet mode to use larger pages.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Reset TreeId to zero on SMB2 TREE_CONNECT

Currently the cifs module breaks the CIFS specs on reconnect as
described in http://msdn.microsoft.com/en-us/library/cc246529.aspx:

"TreeId (4 bytes): Uniquely identifies the tree connect for the
command. This MUST be 0 for the SMB2 TREE_CONNECT Request."

Signed-off-by: Jan-Marek Glogowski <glogow@fbihome.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Tested-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>

CIFS: Fix build failure with smb2

I saw the following build error during a randconfig build:

fs/cifs/smb2ops.c: In function 'smb2_new_lease_key':
fs/cifs/smb2ops.c:1104:2: error: implicit declaration of function 'generate_random_uuid' [-Werror=implicit-function-declaration]

Explicit include the right header to fix this issue.

Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>