tanxiaojun [Mon, 16 Dec 2013 13:32:46 +0000 (21:32 +0800)]
bridge: spelling fixes
Fix spelling errors in bridge driver.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hannes Frederic Sowa [Sun, 15 Dec 2013 02:41:14 +0000 (03:41 +0100)]
ipv6: support IPV6_PMTU_INTERFACE on sockets
IPV6_PMTU_INTERFACE is the same as IPV6_PMTU_PROBE for ipv6. Add it
nontheless for symmetry with IPv4 sockets. Also drop incoming MTU
information if this mode is enabled.
The additional bit in ipv6_pinfo just eats in the padding behind the
bitfield. There are no changes to the layout of the struct at all.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hannes Frederic Sowa [Sat, 14 Dec 2013 04:13:45 +0000 (05:13 +0100)]
ipv4: new ip_no_pmtu_disc mode to always discard incoming frag needed msgs
This new mode discards all incoming fragmentation-needed notifications
as I guess was originally intended with this knob. To not break backward
compatibility too much, I only added a special case for mode 2 in the
receiving path.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hannes Frederic Sowa [Sat, 14 Dec 2013 04:13:38 +0000 (05:13 +0100)]
inet: make no_pmtu_disc per namespace and kill ipv4_config
The other field in ipv4_config, log_martians, was converted to a
per-interface setting, so we can just remove the whole structure.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 18 Dec 2013 21:42:06 +0000 (16:42 -0500)]
Merge git://git./linux/kernel/git/davem/net
Conflicts:
drivers/net/ethernet/intel/i40e/i40e_main.c
drivers/net/macvtap.c
Both minor merge hassles, simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Wed, 18 Dec 2013 07:32:08 +0000 (23:32 -0800)]
net: vmxnet3 calls skb_set_hash
Drivers should call skb_set_hash to set the hash and its type
in an skbuff.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Wed, 18 Dec 2013 07:32:00 +0000 (23:32 -0800)]
net: sun-niu calls skb_set_hash
Drivers should call skb_set_hash to set the hash and its type
in an skbuff.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Wed, 18 Dec 2013 07:31:50 +0000 (23:31 -0800)]
net: sfc calls skb_set_hash
Drivers should call skb_set_hash to set the hash and its type
in an skbuff.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Wed, 18 Dec 2013 07:31:36 +0000 (23:31 -0800)]
net: vxge calls skb_set_hash
Drivers should call skb_set_hash to set the hash and its type
in an skbuff.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Wed, 18 Dec 2013 07:31:23 +0000 (23:31 -0800)]
net: mlx4 calls skb_set_hash
Drivers should call skb_set_hash to set the hash and its type
in an skbuff.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Wed, 18 Dec 2013 07:28:13 +0000 (23:28 -0800)]
net: sky2 calls skb_set_hash
Drivers should call skb_set_hash to set the hash and its type
in an skbuff.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Wed, 18 Dec 2013 07:23:51 +0000 (23:23 -0800)]
net: emulex-benet calls skb_set_hash
Drivers should call skb_set_hash to set the hash and its type
in an skbuff.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Wed, 18 Dec 2013 07:23:42 +0000 (23:23 -0800)]
net: cisco-enic calls skb_set_hash
Drivers should call skb_set_hash to set the hash and its type
in an skbuff.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Wed, 18 Dec 2013 07:23:29 +0000 (23:23 -0800)]
net: cxgb4 calls skb_set_hash
Drivers should call skb_set_hash to set the hash and its type
in an skbuff.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Wed, 18 Dec 2013 07:23:11 +0000 (23:23 -0800)]
net: bnx2x calls skb_set_hash
Drivers should call skb_set_hash to set the hash and its type
in an skbuff.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Wed, 18 Dec 2013 07:22:57 +0000 (23:22 -0800)]
net: bnx2 calls skb_set_hash
Drivers should call skb_set_hash to set the hash and its type
in an skbuff.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 18 Dec 2013 19:58:41 +0000 (14:58 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/jkirsher/net-next
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates
This series contains updates to i40e, ixgbevf, ixgbe and igb.
Don provides an ixgbevf patch to add DCB configuration into the queue
setup so that we won't have to allocate queues in a separate place when
enabling DCB.
Guenter Roeck provides 2 patches for ixgbe to simplify the code by
attaching hwmon sysfs attributes to hwmon device instead of PCI device.
Also fix an issues where the temperature sensor attribute index was
being started with the value 0 and not 1 as per the hwmon API.
Carolyn provides igb patches to fix queue allocation method to
accommodate changes during runtime. This includes changing how the
driver initializes MSIx and checks for MSIx configuration to make it
easier to reconfigure the device when queue changes happen at runtime.
Neerav and Shannon fixes i40e debugfs commands that dump hex information
by using print_hex_dump().
Shannon provides several i40e fixes which include the prevention of
null pointer exception in the dump descriptor by checking that rings
were allocated before trying to reference them. Fixed up a couple of
scanfs to accept various base numbers instead of silently requiring hex.
Anjali fixes up i40e where the incorrect defines were being used for
misc interrupts.
Alan Cox provides a fix for i40e where we assume that the resulting
buffer is zero terminated when we then re-use it. The sscanf is limited
to 512 bytes but needs to be 511 to allow for a terminator.
Stephen Hemminger fixes i40e by making local functions static and removes
unused code (i40e_aq_add/remove_vlan() functions).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Mon, 16 Dec 2013 04:15:11 +0000 (20:15 -0800)]
net_sched: convert tcf_proto_ops to use struct list_head
We don't need to maintain our own singly linked list code.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Mon, 16 Dec 2013 04:15:10 +0000 (20:15 -0800)]
net_sched: convert tc_action_ops to use struct list_head
We don't need to maintain our own singly linked list code.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Mon, 16 Dec 2013 04:15:09 +0000 (20:15 -0800)]
net_sched: convert tcf_hashinfo to hlist and use spinlock
So that we don't need to play with singly linked list,
and since the code is not on hot path, we can use spinlock
instead of rwlock.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Mon, 16 Dec 2013 04:15:08 +0000 (20:15 -0800)]
net_sched: init struct tcf_hashinfo at register time
It looks weird to store the lock out of the struct but
still points to a static variable. Just move them into the struct.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Mon, 16 Dec 2013 04:15:07 +0000 (20:15 -0800)]
net_sched: cls: refactor out struct tcf_ext_map
These information can be saved in tcf_exts, and this will
simplify the code.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Mon, 16 Dec 2013 04:15:05 +0000 (20:15 -0800)]
net_sched: act: use standard struct list_head
Currently actions are chained by a singly linked list,
therefore it is a bit hard to add and remove a specific
entry. Convert it to struct list_head so that in the
latter patch we can remove an action without finding
its head.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Mon, 16 Dec 2013 04:15:04 +0000 (20:15 -0800)]
net_sched: remove get_stats from tc_action_ops
It is not used.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Carolyn Wyborny [Tue, 10 Dec 2013 07:58:34 +0000 (07:58 +0000)]
igb: Change to use statically allocated array for MSIx entries
This patch changes how the driver initializes MSIx and checks
for MSIx configuration. This change makes it easier to reconfigure the
device when queue changes happen at runtime using ethtool's set_channels
feature.
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Carolyn Wyborny [Tue, 10 Dec 2013 07:58:29 +0000 (07:58 +0000)]
igb: Fix queue allocation method to accommodate changing during runtime
When changing number of queues using ethtool's set_channels during runtime,
a queue allocation could fail, which can leave the device in a down state.
In order to preserve the usability of the device in this scenario, this patch
changes the driver to allocate the number of queues only if they have not
been allocated already. The first allocation is then done for the max number
of queues, which is the default queues for this driver. With this change,
queue quantity changes are not subject to queue allocation failures.
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Guenter Roeck [Tue, 26 Nov 2013 07:15:39 +0000 (07:15 +0000)]
ixgbe: Start temperature sensor attribute index with 1
Per hwmon ABI, temperature sensor attribute index starts with 1, not 0.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Guenter Roeck [Tue, 26 Nov 2013 07:15:28 +0000 (07:15 +0000)]
ixgbe: Convert to use devm_hwmon_device_register_with_groups
Simplify the code. Attach hwmon sysfs attributes to hwmon device
instead of pci device. Avoid race conditions caused by attributes
being created after hwmon device registration. Implicitly
(through hwmon API) add mandatory 'name' sysfs attribute.
Other cleanup:
Instead of allocating memory for hwmon attributes, move attributes
and all other hwmon related data into struct hwmon_buff and allocate
the entire structure using devm_kzalloc.
Check return value from calls to igb_add_hwmon_attr() one by one instead
of logically combining them all together.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Don Skidmore [Sat, 21 Sep 2013 01:40:49 +0000 (01:40 +0000)]
ixgbevf: add DCB configuration into queue setup
This patch takes the DCB config checks and adds them to the normal setting
up of the queues. This way we won't have to allocation queues in a separate
place for enabling DCB.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-By: Jack Morgan<jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Stephen Hemminger [Fri, 13 Dec 2013 04:37:50 +0000 (04:37 +0000)]
i40e: make functions static and remove dead code
Make local functions static in the file they are used.
Remove functions i40e_aq_add_vlan and i40e_aq_remove_vlan since
they are not used anywhere by current code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alan Cox [Thu, 12 Dec 2013 02:44:24 +0000 (02:44 +0000)]
i40e: Fix off by one in i40e_dbg_command_write
We assume that the resulting buffer is zero terminated when we then
re-use it. The sscanf is limited to 512 bytes but needs to be 511
to allow for a terminator.
One of a set of problems noted by Jackie Chang
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Shannon Nelson <Shannon.nelson@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Catherine Sullivan [Tue, 26 Nov 2013 10:49:33 +0000 (10:49 +0000)]
i40e: Bump version number
Version updated to 0.3.14-k
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Anjali Singhai Jain [Tue, 26 Nov 2013 10:49:32 +0000 (10:49 +0000)]
i40e: Fix wrong mask bits being used in misc interrupt
No functional change, but the wrong defines were being used.
Change-Id: Ica2afd2dfe18154ca0f1260a508f31e372319ba7
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Shannon Nelson [Tue, 26 Nov 2013 10:49:31 +0000 (10:49 +0000)]
i40e: more print_hex_dump use
Take advantage of print_hex_dump() in another couple places to
clean up the code.
Change-Id: Ib618e75f928308c0afd0d8d74105da0c6577a024
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Shannon Nelson [Tue, 26 Nov 2013 10:49:30 +0000 (10:49 +0000)]
i40e: fix up scanf decoders
Fix up a couple of scanfs to accept various base numbers instead of silently
requiring hex.
Change-Id: I1cc4dffbb1d011bf603cbf34a8db093da57fad7a
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Shannon Nelson [Tue, 26 Nov 2013 10:49:29 +0000 (10:49 +0000)]
i40e: simplify error messages for dump descriptor
debugfs fixes: We don't really need to give usage messages for data errors,
only for invalid command errors.
Change-Id: If3f74ac49e43c3ced7fd388323fa738ac145e055
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Shannon Nelson [Tue, 26 Nov 2013 10:49:26 +0000 (10:49 +0000)]
i40e: prevent null pointer exception in dump descriptor
Check that rings were allocated before trying to reference them.
Change-Id: I33151e55ab7a7a305fecdb88ccb2709ac246b7c7
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
David S. Miller [Wed, 18 Dec 2013 05:49:35 +0000 (00:49 -0500)]
Merge branch 'phy_checkpatch'
Florian Fainelli says:
====================
net: phy: fix checkpatch errors
This patchset fixes trivial checkpatch errors, no functional change
introduced.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 18 Dec 2013 05:38:13 +0000 (21:38 -0800)]
net: phy: spi_ks8995: fix checkpatch errors
checkpatch spotted two errors, fix them.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 18 Dec 2013 05:38:12 +0000 (21:38 -0800)]
net: phy: fix checkpatch errors
checkpatch spotted a few checkpatch errors such as whitespace damages
and switch/case labels not being on the same column, fix them.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 18 Dec 2013 05:38:11 +0000 (21:38 -0800)]
net: phy: micrel: fix checkpath errors
checkpatch spotted a few spaces vs tabs errors, fix them.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 18 Dec 2013 05:38:10 +0000 (21:38 -0800)]
net: phy: mdio_bus: fix checkpath error
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 18 Dec 2013 05:38:09 +0000 (21:38 -0800)]
net: phy: lxt: fix checkpath errors
checkpath spotted a few errors in this file, fix them.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 18 Dec 2013 05:38:08 +0000 (21:38 -0800)]
net: phy: icplus: fix checkpath error
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 18 Dec 2013 05:38:07 +0000 (21:38 -0800)]
net: phy: dp83640: fix checkpath error
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 18 Dec 2013 05:38:06 +0000 (21:38 -0800)]
net: phy: davicom: fix checkpath errors
checkpath spotted a few stylistic errors, fix them.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 18 Dec 2013 05:38:05 +0000 (21:38 -0800)]
net: phy: cicada: fix checkpath errors
checkpath spotted a few stylistic errors fix them.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 18 Dec 2013 05:36:51 +0000 (00:36 -0500)]
Merge branch 'vlan_tpid'
Atzm Watanabe says:
====================
packet: deliver VLAN TPID to userspace
This patchset enables userspace to get VLAN TPID as well as the VLAN TCI.
After the 802.1AD support, userspace packet receivers (packet dumper,
software switch, and the like) need how to know VLAN TPID in order to
reconstruct original tagged frame.
v4: Simply use sizeof(tp_padding) for zeroing the padding bytes,
commented by David Laight.
Use __u16 for tp_vlan_tpid in tpacket_hdr_variant1,
commented by Daniel Borkmann.
v3: Add a definition which indicates whether tp_vlan_tpid is valid.
Explicitly define pad bytes for tpacket{2,3}_hdr and pick the area
for tp_vlan_tpid from the definition. Commented by David Laight.
v2: Add BUILD_BUG_ON() to make current aligned size of
struct tpacket{2,3}_hdr clear. Commented by Ben Hutchings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Atzm Watanabe [Tue, 17 Dec 2013 13:53:40 +0000 (22:53 +0900)]
packet: deliver VLAN TPID to userspace
This enables userspace to get VLAN TPID as well as the VLAN TCI.
Signed-off-by: Atzm Watanabe <atzm@stratosphere.co.jp>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Atzm Watanabe [Tue, 17 Dec 2013 13:53:36 +0000 (22:53 +0900)]
packet: fill the gap of TPACKET_ALIGNMENT with zeros
struct tpacket{2,3}_hdr is aligned to a multiple of TPACKET_ALIGNMENT.
Explicitly defining and zeroing the gap of this makes additional changes
easier.
Signed-off-by: Atzm Watanabe <atzm@stratosphere.co.jp>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Atzm Watanabe [Tue, 17 Dec 2013 13:53:32 +0000 (22:53 +0900)]
packet: make aligned size of struct tpacket{2,3}_hdr clear
struct tpacket{2,3}_hdr is aligned to a multiple of TPACKET_ALIGNMENT.
We may add members to them until current aligned size without forcing
userspace to call getsockopt(..., PACKET_HDRLEN, ...).
Signed-off-by: Atzm Watanabe <atzm@stratosphere.co.jp>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 18 Dec 2013 05:31:01 +0000 (00:31 -0500)]
Merge branch 'bna'
Rasesh Mody says:
====================
bna: Update the Driver to v3.2.23.0
This patch set consists of feature additions like s/w timestamping support,
multi-buffer RX, firmware patch simplification, enhancements for RX filters,
RX processing changes, bug fixes and updates the firmware version to v3.2.3.0.
The patch set addressed the review commnets recieved.
This patch set updates the BNA driver to v3.2.23.0 and was tested against
net-next 3.12.0-rc6 kernel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rasesh Mody [Wed, 18 Dec 2013 01:07:42 +0000 (17:07 -0800)]
bna: Update the Driver Version to 3.2.23.0
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rasesh Mody [Wed, 18 Dec 2013 01:07:41 +0000 (17:07 -0800)]
bna: Firmware Patch Simplification
This patch includes change to enable firmware patch simplication feature.
This feature is targeted to address the requirement to have independent patch
release for firmware. Prior to the 3.2.3.0 firmware, releasing a patch fix for
firmware would require changes to bna driver, to use new firmware images.
However with these changes, if the new firmware is flashed on to the Adapter,
the driver will use the new firmware after checking the patch release byte in
the firmware version.
Update the f/w version to 3.2.3.0
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rasesh Mody [Wed, 18 Dec 2013 01:07:40 +0000 (17:07 -0800)]
bna: Embed SKB Length in TX Vector
- Store the length of the skb buffer mapped along with the handle and use it
while unmapping the buffer.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rasesh Mody [Wed, 18 Dec 2013 01:07:39 +0000 (17:07 -0800)]
bna: Handle the TX Setup Failures
Change details:
- When bnad_setup_tx() returns NULL, the error is NOT returned to the caller.
The caller will incorrectly assume success. So Return ENOMEM when bna_tx_create()
fails.
- If bnad_tx_msix_register() fails, call bna_tx_destroy() to free tx & to NULL
the bnad reference to tcb.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rasesh Mody [Wed, 18 Dec 2013 01:07:38 +0000 (17:07 -0800)]
bna: Add NULL Check Before Dereferencing TCB
Currently we already check to see whether the BNAD_TXQ_TX_STARTED cleared.
But if the tcb structure which contains this flag is also already freed by that
time, we would dereference the NULL pointer. This patch is to check tcb for NULL
pointer, before dereferencing it.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rasesh Mody [Wed, 18 Dec 2013 01:07:37 +0000 (17:07 -0800)]
bna: CQ Read Fix
Valid bit check for completion needs read fence, so that it does not get
reordered with other loads.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rasesh Mody [Wed, 18 Dec 2013 01:07:36 +0000 (17:07 -0800)]
bna: RX Processing and Config Changes
Change Details:
- Prefetch header in GRO path. This reduces napi_frags_skb time from 9% to 5%.
- Changed the configurable limit of RxQ depth to 16384 (was 2048).
- bnad_rx_unmap_q elements are cachealigned.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rasesh Mody [Wed, 18 Dec 2013 01:07:35 +0000 (17:07 -0800)]
bna: Enable Multi Buffer RX
The CT2 HW supports multi-buffer Rx. This patch provides the necessary changes
for bnad to use multi-buffer Rx feature. For BNAD, multi-buffer Rx is by
default enabled when MTU is > 4096. For >4096 MTU, q0 data/large buffers are of
2048 size. As the resource requirements of multi-buffer Rx are different new Rx
needs to be created to use this feature. ASIC posts multiple completions if
frame exceeds buffer size. The last completion is marked with EOP flag.
- Separate HQ and DQ enums for resource allocations and configurations.
- rx_config and rxq structure changes to pass the correct info from bnad.
- DQ depth need not be same as HQ depth. So CQ depth is adjusted accordingly.
- Rx CFG frame size is taken from configured MTU.
- Rx q0 buffer size is configured from bnad s rx_config when multi-buffer is
enabled.
- Poll for entire frame completion.
- Once EOP completion is received gather the number of vectors used by the
frame to submit it to the stack.
- Changed MTU to frame size wherever necessary.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rasesh Mody [Wed, 18 Dec 2013 01:07:34 +0000 (17:07 -0800)]
bna: RX Filter Enhancements
Change Details:
- Added bna_rx_ucast_listset() for synchronous ucast listadd operation.
- Clear mac->handle before adding it to free_q.
- bnad_set_rx_mode() rewritten. bnad_set_rx_mode() adds the MACs in uc_list
to UCAM. If it exceeds the max supported, DEFAULT mode is turned on. If
MCAM limit is exceeded, ALLMULTI mode is turned on.
- Clear CF flags, check for the new mode and reprogram the Rx approach.
- Added bnad_set_rx_ucast_fltr() and bnad_set_rx_mcast_fltr().
- Check for IFF_PROMISC to set the correct mode.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rasesh Mody [Wed, 18 Dec 2013 01:07:33 +0000 (17:07 -0800)]
bna: Fix Filter Add Del
Change Details:
- bna_rx_mcast_listset() API first looks at free_q only and not at other
pending Qs rendering it non-deterministic of giving an upper limit.
Modify bna_rx_mcast_listset() implementation to not use only half of the
limit.
- Allocate and initialize queue for deleting
- Segregate the adding and deleting process by using separate queues.
- The filter framework in bna does not let adding addresses to its max capacity
due to asynchronous operations involved.
Provide a synchronous option to set a given list.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rasesh Mody [Wed, 18 Dec 2013 01:07:32 +0000 (17:07 -0800)]
bna: Set Get IOC fw State
Add APIs to set and get IOC currnet fw state and alt IOC fw state
- bfa_ioc_ct_set_cur_ioc_fwstate()
- bfa_ioc_ct_get_cur_ioc_fwstate()
- bfa_ioc_ct_set_alt_ioc_fwstate()
- bfa_ioc_ct_get_alt_ioc_fwstate()
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rasesh Mody [Wed, 18 Dec 2013 01:07:31 +0000 (17:07 -0800)]
bna: Add software timestamping support
- Invoke skb_tx_timestamp() API just before invoking txq_doorbell()
- Add ethtool (-T) support
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 18 Dec 2013 02:26:19 +0000 (21:26 -0500)]
lib: Add missing arch generic-y entries for asm-generic/hash.h
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neerav Parikh [Tue, 26 Nov 2013 10:49:25 +0000 (10:49 +0000)]
i40e: Fix dump output from debugfs calls
The debugfs commands that dump hex information are not doing these as
expected viz. "lldp get local", "nvm read", "dump debug fwdata", etc.
Use print_hex_dump() instead to hex dump and remove the print buffer
stuff from the code.
Change-Id: I507bd8b2187aae8bad5055b7872978c309cf143e
Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Wed, 18 Dec 2013 00:59:59 +0000 (16:59 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Definitely seems quieter this week,
Radeon, intel, intel broadwell, vmwgfx, ttm, armada, and a couple of
core fixes, one revert in radeon
Most of these are either going to stable or fixes for things
introduced in the merge window"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (30 commits)
drm/edid: add quirk for BPC in Samsung NP700G7A-S01PL notebook
drm/ttm: Fix accesses through vmas with only partial coverage
drm/nouveau: only runtime suspend by default in optimus configuration
drm: don't double-free on driver load error
Revert "drm/radeon: Implement radeon_pci_shutdown"
drm/radeon: add missing display tiling setup for oland
drm/radeon: fix typo in cik_copy_dma
drm/radeon/cik: plug in missing blit callback
drm/radeon/dpm: Fix hwmon crash
drm/radeon: Fix sideport problems on certain RS690 boards
drm/i915: don't update the dri1 breadcrumb with modesetting
DRM: Armada: prime refcounting bug fix
DRM: Armada: fix printing of phys_addr_t/dma_addr_t
DRM: Armada: destroy framebuffer after helper
DRM: Armada: implement lastclose() for fbhelper
drm/i915: Repeat eviction search after idling the GPU
drm/vmwgfx: Add max surface memory param
drm/i915: Fix use-after-free in do_switch
drm/i915: fix pm init ordering
drm/i915: Hold mutex across i915_gem_release
...
Linus Torvalds [Tue, 17 Dec 2013 23:53:24 +0000 (15:53 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"A quick batch of fixes, including the annoying bad lock stack problem
introduced by udp_sk_rx_dst_set() locking change:
1) Use xchg() instead of sk_dst_lock() in udp_sk_rx_dst_set(), from
Eric Dumazet.
2) qlcnic bug fixes from Himanshu Madhani and Manish Chopra.
3) Update IPSEC MAINTAINERS entry, from Steffen Klassert.
4) Administrative neigh entry changes should generate netlink
notifications the same as event generated ones. From Bob
Gilligan.
5) Netfilter SYNPROXY fixes from Patrick McHardy.
6) Netfilter nft_reject endianness fixes from Eric Leblond"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
qlcnic: Dump mailbox registers when mailbox command times out.
qlcnic: Fix mailbox processing during diagnostic test
qlcnic: Allow firmware dump collection when auto firmware recovery is disabled
qlcnic: Fix memory allocation
qlcnic: Fix TSS/RSS validation for 83xx/84xx series adapter.
qlcnic: Fix TSS/RSS ring validation logic.
qlcnic: Fix diagnostic test for all adapters.
qlcnic: Fix usage of netif_tx_{wake, stop} api during link change.
xen-netback: fix fragments error handling in checksum_setup_ip()
neigh: Netlink notification for administrative NUD state change
ipv4: improve documentation of ip_no_pmtu_disc
net: unix: allow bind to fail on mutex lock
MAINTAINERS: Update the IPsec maintainer entry
udp: ipv4: do not use sk_dst_lock from softirq context
netvsc: don't flush peers notifying work during setting mtu
can: peak_usb: fix mem leak in pcan_usb_pro_init()
can: ems_usb: fix urb leaks on failure paths
sctp: loading sctp when load sctp_probe
netfilter: nft_reject: fix endianness in dump function
netfilter: SYNPROXY target: restrict to INPUT/FORWARD
David S. Miller [Tue, 17 Dec 2013 22:21:30 +0000 (17:21 -0500)]
Merge branch 'fixes-for-3.13' of git://gitorious.org/linux-can/linux-can
Marc Kleine-Budde says:
====================
this is a pull request with two fixes for net/master, the current release
cycle.
It consists of a patch by Alexey Khoroshilov from the Linux Driver Verification
project, which fixes a memory leak in ems_usb's failure patch. And a patch by
me which fixes a memory leak in the peak usb driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eugene Crosser [Mon, 16 Dec 2013 08:44:52 +0000 (09:44 +0100)]
qeth: Accurate ethtool output
For OSA devices that support the QUERY_CARD_INFO command, supply
accurate data based on the card type, port mode and link speed
via the 'ethtool' interface.
Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Mon, 16 Dec 2013 08:44:51 +0000 (09:44 +0100)]
netiucv: improve state checking in conn_action_txdone
state checking in conn_action_txdone() is inconsistent.
This patch makes it consistent and issues a trace message
if an unexpected state is detected for the netiucv device.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Mon, 16 Dec 2013 10:45:01 +0000 (11:45 +0100)]
bpf_exp: free duplicated labels at exit time
Valgrind found that extracted labels that are passed from the lexer
weren't freed upon exit. Therefore, add a small helper function that
walks label tables and frees them. Since also NULL can be passed to
free(3), we do not need to take care of that here. While at it, fix
up a spacing error in bpf_set_curr_label().
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Mon, 16 Dec 2013 10:45:00 +0000 (11:45 +0100)]
bpf_dbg: always close socket in bpf_runnable
We must not leave the socket intact in bpf_runnable(). The socket
is used to test if the filter code is being accepted by the kernel
or not. So right after we do the setsockopt(2), we need to close
it again.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 17 Dec 2013 22:09:49 +0000 (17:09 -0500)]
Merge branch 'qlcnic'
Manish Chopra says:
====================
qlcnic: Refactoring and enhancements
This patch series includes follwing changes
* Refactor DCBX code. Do not allow DCBX operations for VFs
* Issue INIT_NIC mailbox command only once
* Refactor initialize nic code path
* Allow configuration for single TX/RX queue
* VLAN enhancement for 84xx adapters
* Support for 16 virtual NIC functions for 84XX series adapters
Please apply to net-next
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Tue, 17 Dec 2013 14:01:55 +0000 (09:01 -0500)]
qlcnic: update version to 5.3.53
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jitendra Kalsaria [Tue, 17 Dec 2013 14:01:54 +0000 (09:01 -0500)]
qlcnic: Support for 16 virtual NIC functions.
Extend virtual NIC functions from 8 to 16 for 84xx adapter.
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Tue, 17 Dec 2013 14:01:53 +0000 (09:01 -0500)]
qlcnic: VLAN enhancement for 84XX adapters
o Support multiple VLANs on 84xx VF devices
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Himanshu Madhani [Tue, 17 Dec 2013 14:01:52 +0000 (09:01 -0500)]
qlcnic: Allow single Tx/Rx queue for all adapters.
o Allow user to set sigle Tx/Rx queue in MSI-x mode,
for ALL supported adapters.
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sucheta Chakraborty [Tue, 17 Dec 2013 14:01:51 +0000 (09:01 -0500)]
qlcnic: Refactor initialize nic code path.
o Change function name from qlcnic_83xx_register_nic_idc_func to
qlcnic_83xx_initialize_nic
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sucheta Chakraborty [Tue, 17 Dec 2013 14:01:50 +0000 (09:01 -0500)]
qlcnic: Issue INIT_NIC command only once.
o DCB AEN registration was reissuing INIT_NIC command. Instead, club
all options of INIT NIC command and issue this command only once.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sucheta Chakraborty [Tue, 17 Dec 2013 14:01:49 +0000 (09:01 -0500)]
qlcnic: Disable DCB operations from SR-IOV VFs.
o These operations will be supported only through PFs (SR-IOV and non-SR-IOV).
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 17 Dec 2013 22:08:21 +0000 (17:08 -0500)]
Merge branch 'for-davem' of git://git./linux/kernel/git/bwh/sfc-next
Ben Hutchings says:
====================
Miscellaneous changes for 3.14:
1. Add more information to some WARN messages.
2. Refactor pushing of RSS configuration, from Andrew Rybchenko.
3. Refactor handling of automatic (device address list) vs manual (RX
NFC) MAC filters.
4. Implement clearing of manual RX filters on EF10 when ntuple offload
is disabled.
5. Remove definitions that are unused since the RX buffer allocation
changes, from Andrew Rybchenko.
6. Improve naming of some statistics, from Shradha Shah.
7. Add statistics for PTP support code.
8. Fix insertion of RX drop filters on EF10.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 17 Dec 2013 21:36:33 +0000 (16:36 -0500)]
Merge branch 'skb_hash'
Tom Herbert says:
====================
net: Add rxhash utility hash functions
v3:
There's really nothing specific about rxhash that constrains
it to be a value just for these receive path. Drop the 'rx'
part in utility functions, including skb_get_rxhash. In subsequent
patches, we can change the rxhash and l4_rxhash names also, as
well as abstracting out the interface to the hash.
Added comments about hash types per feedback.
In this version I'm omitting the changes to drivers to make the
patch set manageable. Will add those changes in followup pathes.
-----
This patch series introduce skb_set_rxhash and skb_clear_rxhash
which are called to set the rxhash (from network drivers) and
to clear the rxhash. This API should be used instead of updating
fields in the skbuff directly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Mon, 16 Dec 2013 06:16:29 +0000 (22:16 -0800)]
net: Add utility function to copy skb hash
Adds skb_copy_hash to copy rxhash and l4_rxhash from one skb to another.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Mon, 16 Dec 2013 06:16:19 +0000 (22:16 -0800)]
net: Add function to set the rxhash
The function skb_set_rxash was added for drivers to call to set
the rxhash in an skb. The type of hash is also specified as
a parameter (L2, L3, L4, or unknown type).
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Mon, 16 Dec 2013 06:12:18 +0000 (22:12 -0800)]
net: Add utility functions to clear rxhash
In several places 'skb->rxhash = 0' is being done to clear the
rxhash value in an skb. This does not clear l4_rxhash which could
still be set so that the rxhash wouldn't be recalculated on subsequent
call to skb_get_rxhash. This patch adds an explict function to clear
all the rxhash related information in the skb properly.
skb_clear_hash_if_not_l4 clears the rxhash only if it is not marked as
l4_rxhash.
Fixed up places where 'skb->rxhash = 0' was being called.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Mon, 16 Dec 2013 06:12:06 +0000 (22:12 -0800)]
net: Change skb_get_rxhash to skb_get_hash
Changing name of function as part of making the hash in skbuff to be
generic property, not just for receive path.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Mon, 16 Dec 2013 06:05:50 +0000 (14:05 +0800)]
net/hsr: using kfree_rcu() to simplify the code
The callback function of call_rcu() just calls a kfree(), so we
can use kfree_rcu() instead of call_rcu() + callback function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Arvid Brodin <arvid.brodin@alten.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 17 Dec 2013 21:25:24 +0000 (16:25 -0500)]
Merge branch 'qlcnic'
Himanshu Madhani says:
====================
qlcnic: Bug fixes.
This series contains bug fixes for mailbox handling and multi Tx queue support
for all supported adapters.
changes from v1 -> v2
o updated patch to fix usage of netif_tx_{wake,stop} api during link change
as per David Miller's suggestion.
o Dropped patch to use spinklock per tx queue for more work.
o Added reworked patch for memory allocation failures.
o Added patch to allow capturing of dump, when auto recovery is disabled in firmware.
o Added patches for mailbox interrupt handling and debugging data for mailbox failure.
Please apply to net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Manish chopra [Mon, 16 Dec 2013 20:37:03 +0000 (15:37 -0500)]
qlcnic: Dump mailbox registers when mailbox command times out.
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Manish chopra [Mon, 16 Dec 2013 20:37:02 +0000 (15:37 -0500)]
qlcnic: Fix mailbox processing during diagnostic test
o Do not enable mailbox polling in case of legacy interrupt.
Process mailbox AEN/response from the interrupt.
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Mon, 16 Dec 2013 20:37:01 +0000 (15:37 -0500)]
qlcnic: Allow firmware dump collection when auto firmware recovery is disabled
o Allow driver to collect firmware dump, during a forced firmware dump
operation, when auto firmware recovery is disabled. Also, during this
operation, driver should not allow reset recovery to be performed.
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Mon, 16 Dec 2013 20:37:00 +0000 (15:37 -0500)]
qlcnic: Fix memory allocation
o Use vzalloc() instead of kzalloc() for allocation of
bootloader size memory. kzalloc() may fail to allocate
the size of bootloader
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Himanshu Madhani [Mon, 16 Dec 2013 20:36:59 +0000 (15:36 -0500)]
qlcnic: Fix TSS/RSS validation for 83xx/84xx series adapter.
o Current code was not allowing the user to configure more
than one Tx ring using ethtool for 83xx/84xx adapter.
This regression was introduced by commit id
18afc102fdcb95d6c7d57f2967a06f2f8fe3ba4c ("qlcnic: Enable
multiple Tx queue support for 83xx/84xx Series adapter.")
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Himanshu Madhani [Mon, 16 Dec 2013 20:36:58 +0000 (15:36 -0500)]
qlcnic: Fix TSS/RSS ring validation logic.
o TSS/RSS ring validation does not take into account that either
of these ring values can be 0. This patch fixes this validation
and would fail set_channel operation if any of these ring value
is 0. This regression was added as part of commit id
34e8c406fda5b5a9d2e126a92bab84cd28e3b5fa ("qlcnic: refactor Tx/SDS
ring calculation and validation in driver.")
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Himanshu Madhani [Mon, 16 Dec 2013 20:36:57 +0000 (15:36 -0500)]
qlcnic: Fix diagnostic test for all adapters.
o Driver should re-allocate all Tx queues after completing
diagnostic tests. This regression was added by commit id
c2c5e3a0681bb1945c0cb211a5f4baa22cb2cbb3 ("qlcnic: Enable
diagnostic test for multiple Tx queues.")
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Himanshu Madhani [Mon, 16 Dec 2013 20:36:56 +0000 (15:36 -0500)]
qlcnic: Fix usage of netif_tx_{wake, stop} api during link change.
o Driver was using netif_tx_{stop,wake}_all_queues() api
during link change event. Remove these api calls to
manage queue start/stop event, as core networking stack
will manage this based on netif_carrier_{on,off} call.
These API's were modified as part of commit id
012ec81223aa45d2b80aeafb77392fd1a19c7b10 ("qlcnic: Multi Tx
queue support for 82xx Series adapter.")
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Mon, 16 Dec 2013 02:45:05 +0000 (10:45 +0800)]
xen-netback: fix fragments error handling in checksum_setup_ip()
Fix to return -EPROTO error if fragments detected in checksum_setup_ip().
Fixes: 1431fb31ecba ('xen-netback: fix fragment detection in checksum setup')
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bob Gilligan [Sun, 15 Dec 2013 21:39:56 +0000 (13:39 -0800)]
neigh: Netlink notification for administrative NUD state change
The neighbour code sends up an RTM_NEWNEIGH netlink notification if
the NUD state of a neighbour cache entry is changed by a timer (e.g.
from REACHABLE to STALE), even if the lladdr of the entry has not
changed.
But an administrative change to the the NUD state of a neighbour cache
entry that does not change the lladdr (e.g. via "ip -4 neigh change
... nud ...") does not trigger a netlink notification. This means
that netlink listeners will not hear about administrative NUD state
changes such as from a resolved state to PERMANENT.
This patch changes the neighbor code to generate an RTM_NEWNEIGH
message when the NUD state of an entry is changed administratively.
Signed-off-by: Bob Gilligan <gilligan@aristanetworks.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 17 Dec 2013 21:09:15 +0000 (16:09 -0500)]
Merge branch 'bonding_netlink'
Scott Feldman says:
====================
bonding: add some more netlink attributes
The following series implements five more bonding netlink attributes:
primary
primary_reselect
fail_over_mac
xmit_hash_policy
resend_igmp
Tested with modified iproute2 to verify attributes can be set at bond creation
time or set later. Verified sysfs interface to attributes continues to work.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / openwrt / staging / blogic.git / log