staging: vboxvideo: remove dead gamma lut code

The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code that was not doing anything
sensible anyway.

Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170804104506.2414-1-peda@axentia.se

drm: dw-hdmi-i2s: add missing company name on Copyright

This driver's Copyright is under Renesas Solutions Corp.
This patch updates the year, because this driver was moved
into synopsys folder in 2017.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/87tw1khvnq.wl%kuninori.morimoto.gx@renesas.com

drm/bridge: dw-hdmi: add better clock disable control

The video setup path aways sets the clock disable register to a specific
value, which has the effect of disabling the CEC engine.  When we add the
CEC driver, this becomes a problem.

Fix this by only setting/clearing the bits that the video path needs to.

Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/E1dcBha-00088l-DE@rmk-PC.armlinux.org.uk

drm/bridge: dw-hdmi: add cec notifier support

Add CEC notifier support to the HDMI bridge driver, so that the CEC
part of the IP can receive its physical address.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/E1dcBhV-00088e-8x@rmk-PC.armlinux.org.uk

drm/tinydrm: remove call to mipi_dbi_init() from mipi_dbi_spi_init()

This removes the call to mipi_dbi_init() from mipi_dbi_spi_init() so that
drivers can have a driver-specific implementation if needed.

Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1501799630-1650-2-git-send-email-david@lechnology.com

drm/fsl-dcu: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-8-git-send-email-noralf@tronnes.org

drm: stm: remove dead code and pointless local lut storage

The redundant fb helper .load_lut is no longer used, and can not
work right without also providing the fb helpers .gamma_set and
.gamma_get thus rendering the code in this driver suspect.

Just remove the dead code.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-14-peda@axentia.se

drm: radeon: remove dead code and pointless local lut storage

The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-13-peda@axentia.se

drm: nouveau: remove dead code and pointless local lut storage

The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-12-peda@axentia.se

drm: mgag200: remove dead code and pointless local lut storage

The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-11-peda@axentia.se

drm: i915: remove dead code and pointless local lut storage

The driver stores lut values from the fbdev interface, and is able
to give them back, but does not appear to do anything with these
lut values. The generic fb helpers have replaced this function,
and may even have made the driver work for the C8 mode from the
fbdev interface. But that is untested.

Since the fb helpers .gamma_set and .gamma_get are obsolete,
remove the dead code.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-10-peda@axentia.se

drm: gma500: remove dead code and pointless local lut storage

The redundant fb helpers .gamma_set and .gamma_get are no longer
used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-9-peda@axentia.se

drm: cirrus: remove dead code and pointless local lut storage

The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-8-peda@axentia.se

drm: ast: remove dead code and pointless local lut storage

The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-7-peda@axentia.se

drm: armada: remove dead empty functions

The redundant fb helpers .gamma_set and .gamma_get are no longer used.
Remove the dead code.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-6-peda@axentia.se

drm: amd: remove dead code and pointless local lut storage

The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-5-peda@axentia.se

drm/rockchip: fix race with kms hotplug and fbdev

According to the kerneldoc[0], should do fbdev setup before calling
drm_kms_helper_poll_init(), otherwise, Kms hotplug event may race
into fbdev helper initial, and fb_helper->dev may be NULL pointer,
that would cause the bug:
[    0.735411] [00000200] *pgd=00000000f6ffe003, *pud=00000000f6ffe003, *pmd=0000000000000000
[    0.736156] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[    0.736648] Modules linked in:
[    0.736930] CPU: 2 PID: 20 Comm: kworker/2:0 Not tainted 4.4.41 #20
[    0.737480] Hardware name: Rockchip RK3399 Board rev2 (BOX) (DT)
[    0.738020] Workqueue: events cdn_dp_pd_event_work
[    0.738447] task: ffffffc0f21f3100 ti: ffffffc0f2218000 task.ti: ffffffc0f2218000
[    0.739109] PC is at mutex_lock+0x14/0x44
[    0.739469] LR is at drm_fb_helper_hotplug_event+0x30/0x114
[    0.756253] [<ffffff8008a344f4>] mutex_lock+0x14/0x44
[    0.756260] [<ffffff8008445708>] drm_fb_helper_hotplug_event+0x30/0x114
[    0.756271] [<ffffff8008473c84>] rockchip_drm_output_poll_changed+0x18/0x20
[    0.756280] [<ffffff8008439fcc>] drm_kms_helper_hotplug_event+0x28/0x34
[    0.756286] [<ffffff800846c444>] cdn_dp_pd_event_work+0x394/0x3c4
[    0.756295] [<ffffff80080b2b38>] process_one_work+0x218/0x3e0
[    0.756302] [<ffffff80080b3538>] worker_thread+0x2e8/0x404
[    0.756308] [<ffffff80080b7e70>] kthread+0xe8/0xf0
[    0.756316] [<ffffff8008082690>] ret_from_fork+0x10/0x40

[0]: https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-kms-helpers.html

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501575103-20136-1-git-send-email-mark.yao@rock-chips.com

drm/rockchip: vop: report error when check resource error

The user would be confused while facing a error commit without
any error report.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494596-7090-1-git-send-email-mark.yao@rock-chips.com

drm/rockchip: vop: round_up pitches to word align

VOP pitch register is word align, need align to word.

VOP_WIN0_VIR:
  bit[31:16] win0_vir_stride_uv
    Number of words of Win0 uv Virtual width
  bit[15:0] win0_vir_width
    Number of words of Win0 yrgb Virtual width
    ARGB888 : win0_vir_width
    RGB888 : (win0_vir_width*3/4) + (win0_vir_width%3)
    RGB565 : ceil(win0_vir_width/2)
    YUV : ceil(win0_vir_width/4)

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494591-7034-1-git-send-email-mark.yao@rock-chips.com

drm/rockchip: vop: fix NV12 video display error

fixup the scale calculation formula on the case
src_height == (dst_height/2).

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494586-6984-1-git-send-email-mark.yao@rock-chips.com

drm/rockchip: vop: fix iommu page fault when resume

Iommu would get page fault with following path:
   vop_disable:
      1, disable all windows and set vop config done
      2, vop enter to standy, all windows not works, but their registers
         are not clean, when you read window's enable bit, may found the
         window is enable.

   vop_enable:
      1, memcpy(vop->regsbak, vop->regs, len)
         save current vop registers to vop->regsbak, then you can found
         window is enable on regsbak.
      2, VOP_WIN_SET(vop, win, gate, 1);
         force enable window gate, but gate and enable are on same
         hardware register, then window enable bit rewrite to vop hardware.
      3, vop power on, and vop might try to scan destroyed buffer,
         then iommu get page fault.

Move windows disable after vop regsbak restore, then vop regsbak mechanism
would keep tracing the modify, everything would be safe.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494582-6934-1-git-send-email-mark.yao@rock-chips.com

drm/rockchip: vop: no need wait vblank on crtc enable

Since atomic framework, crtc enable and disable are in pairs,
no need to wait vblank.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494577-6884-1-git-send-email-mark.yao@rock-chips.com

drm/fb-helper: add new drm_setup_crtcs_fb() function

This adds a new drm_setup_crtcs_fb() function to handle the parts of
drm_setup_crtcs() that touch fb_helper->fb and fb_helper->fbdev. When
drm_setup_crtcs() is called during initialization, these fields are NULL
because they have not been allocated yet.

There is currently a hack at the end of drm_fb_helper_single_fb_probe()
that sets fb_helper->fb, so it is moved to the new drm_setup_crtcs_fb()
function.

This is also done in preparation for addition setup that requires access
to fb_helper->fbdev.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1501777149-8310-2-git-send-email-david@lechnology.com

drm/atmel-hlcdc: switch to drm_*{get,put} helpers

drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to use
the new APIs.

Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501761585-11757-6-git-send-email-cakturk@gmail.com

drm/atmel-hlcdc : constify drm_plane_helper_funcs and drm_plane_funcs.

drm_plane_helper_funcs and drm_plane_funcsare not supposed to change
at runtime. All functions working with drm_plane_helper_funcs and
drm_plane_funcs work with const. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
   6072     596       0    6668    1a0c atmel_hlcdc_plane.o

File size After adding 'const':
   text    data     bss     dec     hex filename
   6218     436       0    6654    19fe atmel_hlcdc_plane.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/646415a3b2e62182f85254115e8491e5caf4b2c7.1499098826.git.arvind.yadav.cs@gmail.com

drm/fb: Fix pointer dereference before null check.

fb_crtc is used before a null check, so move the use after the null check.

This was just identified by inspection. I haven't actually observed a crash
here, so it is possible that the null check could be unnecessary.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1501696813-8807-1-git-send-email-david@lechnology.com

drm: Create a format/modifier blob

Updated blob layout (Rob, Daniel, Kristian, xerpi)

v2:
* Removed __packed, and alignment (.+)
* Fix indent in drm_format_modifier fields (Liviu)
* Remove duplicated modifier > 64 check (Liviu)
* Change comment about modifier (Liviu)
* Remove arguments to blob creation, use plane instead (Liviu)
* Fix data types (Ben)
* Make the blob part of uapi (Daniel)

v3:
Remove unused ret field.
Change i, and j to unsigned int (Emil)

v4:
Use plane->modifier_count instead of recounting (Daniel)

v5:
Rename modifiers to modifiers_property (Ville)
Use sizeof(__u32) instead to reflect UAPI nature (Ville)
Make BUILD_BUG_ON for blob header size

Cc: Rob Clark <robdclark@gmail.com>
Cc: Kristian H. Kristensen <hoegsberg@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <liviu@dudau.co.uk> (v2)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v3)
Signed-off-by: Daniel Stone <daniels@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170724034641.13369-2-ben@bwidawsk.net

drm: Plumb modifiers through plane init

This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.

This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.

v2: A minor addition from Daniel

v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)

v4: Minor comment adjustments (Liviu)

v5: Some new platforms added due to rebase

v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>

drm/msm: Convert to use new iterator macros, v2.

for_each_obj_in_state is about to be removed, so convert
to the new iterator macros.

Just like in omap, use crtc_state->active instead of
crtc_state->enable when waiting for completion.

Changes since v1:
- Fix compilation.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Rob Herring <robh@kernel.org>
Cc: Markus Elfring <elfring@users.sourceforge.net>
Cc: Sushmita Susheelendra <ssusheel@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170719143920.25685-6-maarten.lankhorst@linux.intel.com

drm/nouveau: Convert nouveau to use new iterator macros, v2.

Use the new atomic iterator macros, the old ones are about to be
removed. With the new macros, it's more easy to get old and new state so
get them from the macros instead of from obj->state.

Changes since v1:
- Don't mix up old and new state. (danvet)
- Rebase on top of interruptible swap_state changes.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20170719143920.25685-7-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/omapdrm: Fix omap_atomic_wait_for_completion

Use the new iterator macro and look for crtc_state->active instead of
enable, only crtc_state->active implies that vblanks will happen.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170719143920.25685-5-maarten.lankhorst@linux.intel.com

drm/atomic: Use new iterator macros in drm_atomic_helper_wait_for_flip_done, again.

for_each_obj_in_state is about to be removed, so use the correct new
iterator macro.

I renamed the variable to 'unused', but forgot to convert
drm_atomic_helper_wait_for_flip_done to the new iterator macro,
so make it work this time.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20170719143920.25685-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

dma-buf/sw_sync: clean up list before signaling the fence

If userspace already dropped its own reference by closing the sw_sync
fence fd we might end up in a deadlock where
dma_fence_is_signaled_locked() will trigger the release of the fence and
thus try to hold the lock to remove the fence from the list.

dma_fence_is_signaled_locked() tries to release/free the fence and hold
the lock in the process.

We fix that by changing the order operation and clean up the list and
rb-tree first.

v2: Drop fence get/put dance and manipulate the list first (Chris Wilson)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170729152217.8362-2-gustavo@padovan.org

dma-buf/sw_sync: move timeline_fence_ops around

We are going to use timeline_fence_signaled() in a internal function in
the next commit.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170729152217.8362-1-gustavo@padovan.org

drm: todo: Avoid accidental crossreferences

RST uses underscores at the end of words to create crossreferences and
it will accidentally try to link to tinydrm_ and drm_fb_ targets from
the TODO, which is clearly not the intention in this context.

Use backslashes to escape the special meaning of the underscore.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170731124259.7495-1-thierry.reding@gmail.com

drm: Add a few missing descriptions in drm_driver docs

Fixes the following warnings when building docs:
../include/drm/drm_drv.h:553: warning: No description found for parameter 'debugfs_init'
../include/drm/drm_drv.h:553: warning: No description found for parameter 'gem_open_object'
../include/drm/drm_drv.h:553: warning: No description found for parameter 'gem_close_object'
../include/drm/drm_drv.h:553: warning: No description found for parameter 'prime_handle_to_fd'
../include/drm/drm_drv.h:553: warning: No description found for parameter 'prime_fd_to_handle'
../include/drm/drm_drv.h:553: warning: No description found for parameter 'gem_prime_export'
../include/drm/drm_drv.h:553: warning: No description found for parameter 'gem_prime_import'
../include/drm/drm_drv.h:553: warning: No description found for parameter 'gem_vm_ops'
../include/drm/drm_drv.h:553: warning: No description found for parameter 'major'
../include/drm/drm_drv.h:553: warning: No description found for parameter 'minor'
../include/drm/drm_drv.h:553: warning: No description found for parameter 'patchlevel'
../include/drm/drm_drv.h:553: warning: No description found for parameter 'name'
../include/drm/drm_drv.h:553: warning: No description found for parameter 'desc'
../include/drm/drm_drv.h:553: warning: No description found for parameter 'date'
../include/drm/drm_drv.h:553: warning: No description found for parameter 'driver_features'

There are still a couple more warnings for prime helpers that are
documented elsewhere.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170720174746.29100-5-seanpaul@chromium.org

gpu/host1x: Remove excess parameter in host1x_subdev_add docs

Fixes the following warning when building docs:
../drivers/gpu/host1x/bus.c:50: warning: Excess function parameter 'driver' description in 'host1x_subdev_add'

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170720174746.29100-4-seanpaul@chromium.org

drm: Fix warning when building docs for scdc_helper

Fixes:
../drivers/gpu/drm/drm_scdc_helper.c:203: ERROR: Unexpected indentation.
../drivers/gpu/drm/drm_scdc_helper.c:204: WARNING: Block quote ends without a blank line; unexpected unindent.

Changes in v2:
 - Property blockquote TMDS calculations so they look pretty (Daniel)
 - Remove duplicate documentation from the header file

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170720200921.36897-1-seanpaul@chromium.org

drm/modes: Fix drm_mode_is_420_only() comment

Fixes the following warnings when building docs:
../drivers/gpu/drm/drm_modes.c:1623: warning: No description found for parameter 'display'
../drivers/gpu/drm/drm_modes.c:1623: warning: Excess function parameter 'connector' description in 'drm_mode_is_420_only'

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170720174746.29100-2-seanpaul@chromium.org

drm: Fix kerneldoc for atomic_async_update

The enumeration of FIXMEs wasn't indented properly.

Fixes: fef9df8b5945 ("drm/atomic: initial support for asynchronous plane update")
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170731111733.10507-1-daniel.vetter@ffwll.ch

drm/atomic: Update comment to match the code

The kerneldoc for drm_atomic_crtc_needs_modeset() is outdated and no
longer reflects the actual code. Fix that up to remove confusion.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170731091343.21363-1-thierry.reding@gmail.com

drm/rockchip: vop: rk3328: fix overlay abnormal

It's a hardware bug, all window's overlay channel reset
value is same, hardware overlay would be die.

so we must initial difference id for each overlay channel.

The Channel register is supported on all vop will full design.
Following is the details for this register
VOP_WIN0_CTRL2
  bit[7:4] win_rid_win0_cbr
       axi read id of win0 cbr channel
  bit[3:0] win_rid_win0_yrgb
       axi read id of win0 yrgb channel

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049980-6239-1-git-send-email-mark.yao@rock-chips.com

dt-bindings: display: rockchip: fill Documents for vop series

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049975-6185-1-git-send-email-mark.yao@rock-chips.com

drm/rockchip: vop: add a series of vop support

Vop Full framework now has following vops:
IP version    chipname
  3.1           rk3288
  3.2           rk3368
  3.4           rk3366
  3.5           rk3399 big
  3.6           rk3399 lit
  3.7           rk3228
  3.8           rk3328

The above IP version is from H/W define, some of vop support get
the IP version from VERSION_INFO register, some are not.
hardcode the IP version for each vop to identify them.

major version: used for IP structure, Vop full framework is 3,
               vop little framework is 2.
minor version: on same structure, newer design vop will bigger
               then old one.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049971-6131-1-git-send-email-mark.yao@rock-chips.com

drm/rockchip: vop: group vop registers

Grouping the vop registers facilitates make register
definition clearer, and also is useful for different vop
reuse the same group register.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1501221986-29722-1-git-send-email-mark.yao@rock-chips.com

drm/rockchip: vop: move line_flag_num to interrupt registers

In the hardware design process, the design of line flags
register is associated with the interrupt register,
placing the line flags in the interrupt definition is
more reasonable, and it would make multi-vop define easilier.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049960-6006-1-git-send-email-mark.yao@rock-chips.com

drm/rockchip: vop: move write_relaxed flags to vop register

Since the drm atomic framework, only a small part of the vop
register needs sync write, Currently seems only following registers
need sync write:
   cfg_done, standby and interrupt related register.

All ctrl registers are using the sync write method that is
inefficient, hardcode the write_relaxed flags to vop registers,
then can only do synchronize write for those actual needed register.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049953-5946-1-git-send-email-mark.yao@rock-chips.com

drm/rockchip: vop: initialize registers directly

At present we are using init_table to initialize some
registers, but the Register init table use un-document define,
it is unreadable, and sometimes we only want to update tiny
bits, init table method is not friendly, it's diffcult to
reuse for difference chips.

To make it clean, initialize registers directly, and drops
init_table mechanism out.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049946-5877-1-git-send-email-mark.yao@rock-chips.com

dma-buf/sync_file: Allow multiple sync_files to wrap a single dma-fence

Up until recently sync_file were create to export a single dma-fence to
userspace, and so we could canabalise a bit insie dma-fence to mark
whether or not we had enable polling for the sync_file itself. However,
with the advent of syncobj, we do allow userspace to create multiple
sync_files for a single dma-fence. (Similarly, that the sw-sync
validation framework also started returning multiple sync-files wrapping
a single dma-fence for a syncpt also triggering the problem.)

This patch reverts my suggestion in commit e24165537312
("dma-buf/sync_file: only enable fence signalling on poll()") to use a
single bit in the shared dma-fence and restores the sync_file->flags for
tracking the bits individually.

Reported-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Fixes: f1e8c67123cf ("dma-buf/sw-sync: Use an rbtree to sort fences in the timeline")
Fixes: e9083420bbac ("drm: introduce sync objects (v4)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: dri-devel@lists.freedesktop.org
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.13-rc1+
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170728212951.7818-1-chris@chris-wilson.co.uk

tinydrm: repaper: add CONFIG_THERMAL dependency

The new RePaper driver uses the thermal subsystem, and fails to link
when it is built-in but thermal is a loadable module:

drivers/gpu/drm/tinydrm/repaper.o: In function `repaper_probe':
repaper.c:(.text+0x540): undefined reference to `thermal_zone_get_zone_by_name'
drivers/gpu/drm/tinydrm/repaper.o: In function `repaper_fb_dirty':
repaper.c:(.text+0xff4): undefined reference to `thermal_zone_get_temp'

This adds another Kconfig dependency to prevent the broken configuration,
forcing repaper to be a module too.

Fixes: 3589211e9b03 ("drm/tinydrm: Add RePaper e-ink driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170727100004.300665-1-arnd@arndb.de

drm/hisilicon: hibmc: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-37-git-send-email-noralf@tronnes.org

drm/nouveau: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-33-git-send-email-noralf@tronnes.org

drm/omapdrm: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-31-git-send-email-noralf@tronnes.org

drm/amdgpu: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-30-git-send-email-noralf@tronnes.org

drm/rockchip: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-25-git-send-email-noralf@tronnes.org

drm/mediatek: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-23-git-send-email-noralf@tronnes.org

drm/tinydrm: Use .dumb_map_offset and .dumb_destroy defaults

tinydrm can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-22-git-send-email-noralf@tronnes.org

drm/zte: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-21-git-send-email-noralf@tronnes.org

drm/vc4: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-20-git-send-email-noralf@tronnes.org

drm/tilcdc: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-19-git-send-email-noralf@tronnes.org

drm/sun4i: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-18-git-send-email-noralf@tronnes.org

drm/stm: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-17-git-send-email-noralf@tronnes.org

drm/shmobile: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-15-git-send-email-noralf@tronnes.org

drm/rcar-du: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-14-git-send-email-noralf@tronnes.org

drm/pl111: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-13-git-send-email-noralf@tronnes.org

drm/imx: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-10-git-send-email-noralf@tronnes.org

drm/atmel-hlcdc: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-7-git-send-email-noralf@tronnes.org

drm/arm: mali-dp: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Brian Starkey <brian.starkey@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-6-git-send-email-noralf@tronnes.org

drm/arm: hdlcd: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Brian Starkey <brian.starkey@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-5-git-send-email-noralf@tronnes.org

drm/arc: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-4-git-send-email-noralf@tronnes.org

drm/dumb-buffers: Add defaults for .dumb_map_offset and .dumb_destroy

Almost everyone did end up using GEM as bo, so this adds defaults
for the drm_driver.dumb_destroy and drm_driver.dumb_map_offset
callbacks.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-3-git-send-email-noralf@tronnes.org

drm/gem: Add drm_gem_dumb_map_offset()

Add a common drm_driver.dumb_map_offset function for GEM backed drivers.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-2-git-send-email-noralf@tronnes.org

drm/vc4: Convert more lock requirement comments to lockdep assertions.

Since I do my development with lockdep on, this will help make sure I
don't introduce bugs here.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725182718.31468-3-eric@anholt.net
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/vc4: Add an ioctl for labeling GEM BOs for summary stats

This has proven immensely useful for debugging memory leaks and
overallocation (which is a rather serious concern on the platform,
given that we typically run at about 256MB of CMA out of up to 1GB
total memory, with framebuffers that are about 8MB ecah).

The state of the art without this is to dump debug logs from every GL
application, guess as to kernel allocations based on bo_stats, and try
to merge that all together into a global picture of memory allocation
state.  With this, you can add a couple of calls to the debug build of
the 3D driver and get a pretty detailed view of GPU memory usage from
/debug/dri/0/bo_stats (or when we debug print to dmesg on allocation
failure).

The Mesa side currently labels at the gallium resource level (so you
see that a 1920x20 pixmap has been created, presumably for the window
system panel), but we could extend that to be even more useful with
glObjectLabel() names being sent all the way down to the kernel.

(partial) example of sorted debugfs output with Mesa labeling all
resources:

               kernel BO cache:  16392kb BOs (3)
       tiling shadow 1920x1080:   8160kb BOs (1)
       resource 1920x1080@32/0:   8160kb BOs (1)
scanout resource 1920x1080@32/0:   8100kb BOs (1)
                        kernel:   8100kb BOs (1)

v2: Use strndup_user(), use lockdep assertion instead of just a
    comment, fix an array[-1] reference, extend comment about name
    freeing.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725182718.31468-2-eric@anholt.net
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/vc4: Start using u64_to_user_ptr.

Chris Wilson pointed out this little cleanup in a review of new code,
so let's fix up the code I was copying from.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725182718.31468-1-eric@anholt.net
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Merge airlied/drm-next into drm-misc-next

Backmerge drm-next with -rc2 in it to pull in a couple stm patches that
were previously incorrectly applied to -misc-next. By picking them up in
the correct manner, git will hopefully fix any errant trees that are out
in the wild.

Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm: linux-next: build failure after merge of the drm-misc tree

Hi all,

After merging the drm-misc tree, today's linux-next build (x86_64
allmodconfig) failed like this:

drivers/staging/vboxvideo/vbox_drv.c:235:2: error: unknown field 'set_busid' specified in initializer
  .set_busid = drm_pci_set_busid,
  ^
drivers/staging/vboxvideo/vbox_drv.c:235:15: error: 'drm_pci_set_busid' undeclared here (not in a function)
  .set_busid = drm_pci_set_busid,
               ^
drivers/staging/vboxvideo/vbox_drv.c: In function 'vbox_init':
drivers/staging/vboxvideo/vbox_drv.c:273:9: error: implicit declaration of function 'drm_pci_init' [-Werror=implicit-function-declaration]
  return drm_pci_init(&driver, &vbox_pci_driver);
         ^
drivers/staging/vboxvideo/vbox_drv.c: In function 'vbox_exit':
drivers/staging/vboxvideo/vbox_drv.c:278:2: error: implicit declaration of function 'drm_pci_exit' [-Werror=implicit-function-declaration]
  drm_pci_exit(&driver, &vbox_pci_driver);
  ^

Caused by commits

  5c484cee7ef9 ("drm: Remove drm_driver->set_busid hook")
  10631d724def ("drm/pci: Deprecate drm_pci_init/exit completely")

interacting with commit

  dd55d44f4084 ("staging: vboxvideo: Add vboxvideo to drivers/staging")

from the staging.current tree.

I have applied the following merge fix patch - please check that it
is correct.

From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 19 Jul 2017 11:41:01 +1000
Subject: [PATCH] drm: fixes for staging due to API changes in the drm core

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Backmerge tag 'v4.13-rc2' into drm-next

Linux 4.13-rc2

This is required for drm-misc fixing.

Merge tag 'drm-misc-next-2017-07-26' of git://anongit.freedesktop.org/git/drm-misc into drm-next

drm-misc-next-2017-07-18:
Core Changes:
- A couple fixes to only opening crc when needed (Maarten)
- Change atomic helper swap_state to be interruptible (Maarten)
- fb_helper: Support waiting for an output before setting up (Daniel)
- Allow drivers supporting runtime_pm to use helper_commit_tail (Maxime)

Driver Changes:
- misc: Use %pOF to print device node names (Rob)
- Miscellaneous fixes

drm-misc-next-2017-07-18:
UAPI Changes:
- Fail commits which request an event without including a crtc (Andrey)

Core Changes:
- Add YCBCR 4:2:0 support (Shashank)
- s/drm_atomic_replace_property_blob/drm_property_replace_blob/ (Peter)
- Add proper base class for private objs instead of using void* (Ville)
- Remove pending_read/write_domains from drm_gem_object (Chris)
- Add async plane update support (ie: cursor) to atomic helpers (Gustavo)
- Add old state to .enable and rename to .atomic_enable (Laurent)
- Add drm_atomic_helper_wait_for_flip_done() (Boris)
- Remove drm_driver->set_busid hook (Daniel)
- Migrate vblank documentation into the source files (Daniel)
- Add fb_helper->lock instead of abusing modeset lock (Thierry/Daniel)

Driver Changes:
- stm: Add STM32 DSI controller driver (Phillipe)
- amdgpu: Numerous small/misc fixes
- bridge: Add Synopsys Designware MIPI DSI host bridge driver (Phillipe)
- tinydrm: Add support for Pervasive Displays RePaper displays (Noralf)
- misc: Replace for_each_[obj]_in_state to prep for removal (Maarten)
- misc: Use .atomic_disable for atomic drivers (Laurent)
- vgem: Pin pages when mapped/exported (Chris)
- dw_hdmi: Add support for Rockchip RK3399 (Mark)
- atmel-hlcdc: Add 8-bit color look-up table format (Peter)
- vc4: Send vblank event when disabling a crtc (Boris)
- vc4: Use atomic helpers for fence waits (Eric)
- misc: drop drm_vblank_cleanup cargo-cult (Daniel)

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Peter Rosin <peda@axentia.se>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Philippe CORNU <philippe.cornu@st.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
* tag 'drm-misc-next-2017-07-26' of git://anongit.freedesktop.org/git/drm-misc: (171 commits)
  drm/hisilicon: fix build error without fbdev emulation
  drm/atomic: implement drm_atomic_helper_commit_tail for runtime_pm users
  drm: Improve kerneldoc for drm_modeset_lock
  drm/hisilicon: Remove custom FB helper deferred setup
  drm/exynos: Remove custom FB helper deferred setup
  drm/fb-helper: Support deferred setup
  dma-fence: Don't BUG_ON when not absolutely needed
  drm: Convert to using %pOF instead of full_name
  drm/syncobj: Fix kerneldoc
  drm/atomic: Allow drm_atomic_helper_swap_state to fail
  drm/atomic: Add __must_check to drm_atomic_helper_swap_state.
  drm/vc4: Handle drm_atomic_helper_swap_state failure
  drm/tilcdc: Handle drm_atomic_helper_swap_state failure
  drm/tegra: Handle drm_atomic_helper_swap_state failure
  drm/msm: Handle drm_atomic_helper_swap_state failure
  drm/mediatek: Handle drm_atomic_helper_swap_state failure
  drm/i915: Handle drm_atomic_helper_swap_state failure
  drm/atmel-hlcdc: Handle drm_atomic_helper_swap_state failure
  drm/nouveau: Handle drm_atomic_helper_swap_state failure
  drm/atomic: Change drm_atomic_helper_swap_state to return an error.
  ...

drm/bridge: Add a devm_ allocator for panel bridge.

This will let drivers reduce the error cleanup they need, in
particular the "is_panel_bridge" flag.

v2: Slight cleanup of remove function by Andrzej

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170718210510.12229-2-eric@anholt.net

drm/vc4: add HDMI CEC support

This patch adds support to VC4 for CEC.  It is under a separate
Kconfig option to keep everyone using VC4 from needing to pull in the
CEC core.

Thanks to Eric Anholt for providing me with the CEC register information.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170716104804.48308-4-hverkuil@xs4all.nl

drm/vc4: prepare for CEC support

In order to support CEC the hsm clock needs to be enabled in
vc4_hdmi_bind(), not in vc4_hdmi_encoder_enable(). Otherwise you wouldn't
be able to support CEC when there is no hotplug detect signal, which is
required by some monitors that turn off the HPD when in standby, but keep
the CEC bus alive so they can be woken up.

The HDMI core also has to be enabled in vc4_hdmi_bind() for the same
reason.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170716104804.48308-3-hverkuil@xs4all.nl

drm/stm: dsi: Constify phy ops structure

Constify dw_mipi_dsi_stm_phy_ops as these ops are not supposed
to change at runtime.

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500552357-29487-8-git-send-email-philippe.cornu@st.com

drm/stm: ltdc: Cleanup rename returned value

Rename the returned value from "res" to "ret" as it is more "readable".

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500552357-29487-7-git-send-email-philippe.cornu@st.com

drm/stm: ltdc: add devm_reset_control & platform_get_ressource

Use devm_reset_control_get_exclusive to avoid resource leakage (based
on patch "Convert drivers to explicit reset API" from Philipp Zabel).

Also use platform_get_resource, which is more usual and
consistent with platform_get_irq called later.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500552357-29487-6-git-send-email-philippe.cornu@st.com

drm/stm: ltdc: Constify funcs structures

Constify drm funcs structures.

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500552357-29487-5-git-send-email-philippe.cornu@st.com

drm/stm: ltdc: Lindent and minor cleanups

Lindent then checkpatch --strict cleanups

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500552357-29487-4-git-send-email-philippe.cornu@st.com

drm/stm: ltdc: Cleanup signal polarity defines

The GCR_PCPOL/DEPOL/VSPOL/HSPOL defines are sufficient to
describe the HS, VS, DE & PC signal polarities.

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500552357-29487-3-git-send-email-philippe.cornu@st.com

drm/stm: drv: Rename platform driver name

Rename the platform driver name from "stm" to "stm32-display"
for a better readability in /sys/bus/platform/drivers entries.

Note: We keep "stm" as drm_driver.name because it is better
when using "modetest -M stm ..." (even if recent modetest patch
avoids using -M).

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500552357-29487-2-git-send-email-philippe.cornu@st.com

drm: stm: remove "default y" in Kconfig

To do not force stm driver to be build by default

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1499699248-25776-1-git-send-email-benjamin.gaignard@linaro.org

drm/stm: Add STM32 DSI controller driver

Add the STM32 DSI controller driver that uses the Synopsys DesignWare
MIPI DSI host controller bridge.

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500277223-29553-8-git-send-email-philippe.cornu@st.com

dt-bindings: display: stm32: Add DSI controller

This patch adds documentation of device tree bindings for the STM32 DSI
controller based on the Synopsys DesignWare MIPI DSI host controller.

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500277223-29553-7-git-send-email-philippe.cornu@st.com

dt-bindings: display: stm32: remove st-display-subsystem parent node requirement

There is no need anymore to have a "st-display-subsystem" parent node
in the device tree for the ltdc.

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1500277223-29553-6-git-send-email-philippe.cornu@st.com

drm/hisilicon: fix build error without fbdev emulation

We cannot reference priv->fbdev outside of the #ifdef:

drivers/net/virtio_net.c:1881:12: error: 'virtnet_restore_up' defined but not used [-Werror=unused-function]
 static int virtnet_restore_up(struct virtio_device *vdev)
drivers/net/virtio_net.c:1859:13: error: 'virtnet_freeze_down' defined but not used [-Werror=unused-function]
 static void virtnet_freeze_down(struct virtio_device *vdev)

As the #ifdef is a bit annoying here, this removes it entirely
and uses an IS_ENABLED() check in it place where needed.

Fixes: b4dd9f1ffaba ("drm/hisilicon: Remove custom FB helper deferred setup")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[danvet: One step further, also remove the IS_ENABLED checks, core
no-ops out the fb helper functions that the cma helpers use. Discussed
with Arnd on dri-devel.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725180555.3699056-1-arnd@arndb.de
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/atomic: implement drm_atomic_helper_commit_tail for runtime_pm users

The current drm_atomic_helper_commit_tail helper works only if the CRTC is
accessible, and documents an alternative implementation that is supposed to
be used if that happens.

That implementation is then duplicated by some drivers. Instead of
documenting it, let's implement an helper that all the relevant users can
use directly.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/a8f92dc70048bab746e94dadd1c23200626aff60.1500555652.git-series.maxime.ripard@free-electrons.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Improve kerneldoc for drm_modeset_lock

Explain better when the drm_modeset_acquire_ctx parameter can
be skipped for drm_modeset_lock() call.

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170720160748.12856-1-Liviu.Dudau@arm.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/hisilicon: Remove custom FB helper deferred setup

The FB helper core now supports deferred setup, so the driver's custom
implementation can be removed.

v2: Dont' resurrect drm_vblank_cleanup.

Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Thierry Reding <treding@nvidia.com> (v1)
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170706130023.28417-5-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/exynos: Remove custom FB helper deferred setup

The FB helper core now supports deferred setup, so the driver's custom
implementation can be removed.

v2: Drop NULL check, drm_fb_helper_hotplug_event handles that already.

Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com> (v1)
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170706130023.28417-4-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/fb-helper: Support deferred setup

FB helper code falls back to a 1024x768 mode if no outputs are connected
or don't report back any modes upon initialization. This can be annoying
because outputs that are added to FB helper later on can't be used with
FB helper if they don't support a matching mode.

The fallback is in place because VGA connectors can happen to report an
unknown connection status even when they are in fact connected.

Some drivers have custom solutions in place to defer FB helper setup
until at least one output is connected. But the logic behind these
solutions is always the same and there is nothing driver-specific about
it, so a better alterative is to fix the FB helper core and add support
for all drivers automatically.

This patch adds support for deferred FB helper setup. It checks all the
connectors for their connection status, and if all of them report to be
disconnected marks the FB helper as needing deferred setup. Whet setup
is deferred, the FB helper core will automatically retry setup after a
hotplug event, and it will keep trying until it succeeds.

v2: Rebase onto my entirely reworked fbdev helper locking. One big
difference is that this version again drops&reacquires the fbdev lock
(which is now fb_helper->lock, but before this patch series it was
mode_config->mutex), because register_framebuffer must be able to
recurse back into fbdev helper code for the initial screen setup.

v3: __drm_fb_helper_initial_config must hold fb_helper->lock upon
return, I've fumbled that in the deferred setup case (Liviu).

v4: I was blind, redo this all. __drm_fb_helper_initial_config
shouldn't need to reacquire fb_helper->lock, that just confuses
callers. I myself got confused by kernel_fb_helper_lock and somehow
thought it's the same as fb_helper->lock. Tsk.

Also simplify the logic a bit (we don't need two functions to probe
connectors), we can stick much closer to the existing code. And update
some comments I've spotted that are outdated.

v5: Don't pass -EAGAIN to drivers, it's just an internal error code
(Liviu).

v6: Add _and_unlock suffix to clarify locking (Maarten)

Cc: Liviu Dudau <liviu@dudau.co.uk>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com> (v1)
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Reviewed-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170706130023.28417-3-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

dma-fence: Don't BUG_ON when not absolutely needed

It makes debugging a massive pain.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170720125107.26693-1-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>