Merge tag 'for-v5.1' of git://git./linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "Nothing too fancy in the power-supply subsystem this time. There are
  less patches than usual, since I did not have enough time to review
  them in time. The good news is, that all patches have been in
  linux-next for more than two weeks and there are no complicated
  cross-subsystem patchsets this time!

  Summary:

   - at91-reset: add sam9x60 support

   - sc27xx: improve capacity logic

   - goldfish_battery: enhance driver by adding many new properties

   - isp1704: drop platform data and migrate to gpiod

   - misc small fixes and improvements"

* tag 'for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (25 commits)
  power: reset: at91-reset: add support for sam9x60 SoC
  dt-bindings: arm: atmel: add new sam9x60 reset controller binding
  dt-bindings: arm: atmel: add missing samx7 to reset controller
  max17042_battery: fix potential use-after-free on device remove
  power: supply: core: Add a field to support battery max voltage
  dt-bindings: power: supply: Add voltage-max-design-microvolt property
  bq27x00: use cached flags
  power: supply: ds2782: fix possible use-after-free on remove
  power: supply: bq25890: show max charge current/voltage as configured
  power: supply: sc27xx: Fix capacity saving function
  power: supply: sc27xx: Fix the incorrect formula when converting capacity to coulomb counter
  power: supply: sc27xx: Add one property to read charge voltage
  dt-bindings: power: sc27xx: Add one IIO channel to read charge voltage
  drivers: power: supply: goldfish_battery: Add support for reading more properties
  power: supply: charger-manager: Fix trivial language typos
  cpcap-charger: generate events for userspace
  power: supply: remove some duplicated includes
  power: twl4030: fix a missing check of return value
  drivers: power: supply: goldfish_battery: Use tabs for alignment
  drivers: power: supply: goldfish_battery: Fix alignment
  ...

Merge tag 'hsi-for-5.1' of git://git./linux/kernel/git/sre/linux-hsi

Pull HIS update from Sebastian Reichel:
 "Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE"

* tag 'hsi-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: omap_ssi_port: fix debugfs_simple_attr.cocci warnings

Merge tag 'for-linus-5.1' of git://github.com/cminyard/linux-ipmi

Pull IPMI updates from Corey Minyard:
 "A couple of bug fixes and a bunch of code cleanup:

   - Fix a use after free error in a certain error situation.

   - Fix some flag handling issues in the SSIF (I2C) IPMI driver.

   - A bunch of cleanups, spacing issues, converting pr_xxx to dev_xxx,
     use standard UUID handling, and some other minor stuff.

   - The IPMI code was creating a platform device if none was supplied.
     Instead of doing that, have every source that creates an IPMI
     device supply a device struct. This fixes several issues,including
     a crash in one situation, and cleans things up a bit"

* tag 'for-linus-5.1' of git://github.com/cminyard/linux-ipmi:
  ipmi_si: Potential array underflow in hotmod_handler()
  ipmi_si: Remove hacks for adding a dummy platform devices
  ipmi_si: Consolidate scanning the platform bus
  ipmi_si: Remove hotmod devices on removal and exit
  ipmi_si: Remove hardcode IPMI devices by scanning the platform bus
  ipmi_si: Switch hotmod to use a platform device
  ipmi: Consolidate the adding of platform devices
  ipmi_si: Rename addr_type to addr_space to match what it does
  ipmi_si: Convert some types into unsigned
  ipmi_si: Fix crash when using hard-coded device
  ipmi: Use dedicated API for copying a UUID
  ipmi: Use defined constant for UUID representation
  ipmi:ssif: Change some pr_xxx to dev_xxx calls
  ipmi: kcs_bmc: handle devm_kasprintf() failure case
  ipmi: Fix return value when a message is truncated
  ipmi: clean an indentation issue, remove extraneous space
  ipmi: Make the smi watcher be disabled immediately when not needed
  ipmi: Fix how the lower layers are told to watch for messages
  ipmi: Fix SSIF flag requests
  ipmi_si: fix use-after-free of resource->name

Merge branch 'ras-core-for-linus' of git://git./linux/kernel/git/tip/tip

Pull RAS updates from Borislav Petkov:
 "This time around we have in store:

   - Disable MC4_MISC thresholding banks on all AMD family 0x15 models
     (Shirish S)

   - AMD MCE error descriptions update and error decode improvements
     (Yazen Ghannam)

   - The usual smaller conversions and fixes"

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Improve error message when kernel cannot recover, p2
  EDAC/mce_amd: Decode MCA_STATUS in bit definition order
  EDAC/mce_amd: Decode MCA_STATUS[Scrub] bit
  EDAC, mce_amd: Print ExtErrorCode and description on a single line
  EDAC, mce_amd: Match error descriptions to latest documentation
  x86/MCE/AMD, EDAC/mce_amd: Add new error descriptions for some SMCA bank types
  x86/MCE/AMD, EDAC/mce_amd: Add new McaTypes for CS, PSP, and SMU units
  x86/MCE/AMD, EDAC/mce_amd: Add new MP5, NBIO, and PCIE SMCA bank types
  RAS: Add a MAINTAINERS entry
  RAS: Use consistent types for UUIDs
  x86/MCE/AMD: Carve out the MC4_MISC thresholding quirk
  x86/MCE/AMD: Turn off MC4_MISC thresholding on all family 0x15 models
  x86/MCE: Switch to use the new generic UUID API

Merge tag 'edac_for_5.1' of git://git./linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:

 - A new EDAC AST 2500 SoC driver (Stefan M Schaeckeler)

 - New i10nm EDAC driver for Intel 10nm CPUs (Qiuxu Zhuo and Tony Luck)

 - Altera SDRAM functionality carveout for separate enablement of RAS
   and SDRAM capabilities on some Altera chips. (Thor Thayer)

 - The usual round of cleanups and fixes

And last but not least: recruit James Morse as a reviewer for the ARM
side.

* tag 'edac_for_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC/altera: Add separate SDRAM EDAC config
  EDAC, altera: Add missing of_node_put()
  EDAC, skx_common: Add code to recognise new compound error code
  EDAC, i10nm: Fix randconfig builds
  EDAC, i10nm: Add a driver for Intel 10nm server processors
  EDAC, skx_edac: Delete duplicated code
  EDAC, skx_common: Separate common code out from skx_edac
  EDAC: Do not check return value of debugfs_create() functions
  EDAC: Add James Morse as a reviewer
  dt-bindings, EDAC: Add Aspeed AST2500
  EDAC, aspeed: Add an Aspeed AST2500 EDAC driver

Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid

Pull HID updates from Jiri Kosina:

 - support for Pro Pen slim, from Jason Gerecke

 - power management improvements to Intel-ISH driver, from Song Hongyan

 - UCLogic driver revamp in order to be able to support wider range of
   Huion tablets, from Nikolai Kondrashov

 - Asus Transbook support, from NOGUCHI Hiroshi

 - other assorted small bugfixes / cleanups and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (46 commits)
  HID: Remove Waltop tablets from hid_have_special_driver
  HID: Remove KYE tablets from hid_have_special_driver
  HID: Remove hid-uclogic entries from hid_have_special_driver
  HID: uclogic: Do not initialize non-USB devices
  HID: uclogic: Add support for Ugee G5
  HID: uclogic: Support Gray-coded rotary encoders
  HID: uclogic: Support faking Wacom pad device ID
  HID: uclogic: Add support for XP-Pen Deco 01
  HID: uclogic: Add support for XP-Pen Star G640
  HID: uclogic: Add support for XP-Pen Star G540
  HID: uclogic: Add support for Ugee EX07S frame controls
  HID: uclogic: Add support for Ugee M540
  HID: uclogic: Add support for Ugee 2150
  HID: uclogic: Support v2 protocol
  HID: uclogic: Support fragmented high-res reports
  HID: uclogic: Support in-range reporting emulation
  HID: uclogic: Designate current protocol v1
  HID: uclogic: Re-initialize tablets on resume
  HID: uclogic: Extract tablet parameter discovery into a module
  HID: uclogic: Extract report descriptors to a module
  ...

Merge branch 'for-linus' of git://git./linux/kernel/git/livepatching/livepatching

Pull livepatching updates from Jiri Kosina:

 - support for something we call 'atomic replace', and allows for much
   better handling of cumulative patches (which is something very useful
   for distros), from Jason Baron with help of Petr Mladek and Joe
   Lawrence

 - improvement of handling of tasks blocking finalization, from Miroslav
   Benes

 - update of MAINTAINERS file to reflect move towards group
   maintainership

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: (22 commits)
  livepatch/selftests: use "$@" to preserve argument list
  livepatch: Module coming and going callbacks can proceed with all listed patches
  livepatch: Proper error handling in the shadow variables selftest
  livepatch: return -ENOMEM on ptr_id() allocation failure
  livepatch: Introduce klp_for_each_patch macro
  livepatch: core: Return EOPNOTSUPP instead of ENOSYS
  selftests/livepatch: add DYNAMIC_DEBUG config dependency
  livepatch: samples: non static warnings fix
  livepatch: update MAINTAINERS
  livepatch: Remove signal sysfs attribute
  livepatch: Send a fake signal periodically
  selftests/livepatch: introduce tests
  livepatch: Remove ordering (stacking) of the livepatches
  livepatch: Atomic replace and cumulative patches documentation
  livepatch: Remove Nop structures when unused
  livepatch: Add atomic replace
  livepatch: Use lists to manage patches, objects and functions
  livepatch: Simplify API by removing registration step
  livepatch: Don't block the removal of patches loaded after a forced transition
  livepatch: Consolidate klp_free functions
  ...

Merge tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for the 5.1 merge window.

  The big changes I'd highlight are:
   - nouveau has HMM support now, there is finally an in-tree user so we
     can quieten down the rip it out people.
   - i915 now enables fastboot by default on Skylake+
   - Displayport Multistream support has been refactored and should
     hopefully be more reliable.

  Core:
   - header cleanups aiming towards removing drmP.h
   - dma-buf fence seqnos to 64-bits
   - common helper for DP mst hotplug for radeon,i915,amdgpu + new
     refcounting scheme
   - MST i2c improvements
   - drm_syncobj_cb removal
   - ARM FB compression fourcc
   - P010 + P016 fourcc
   - allwinner tiled format modifier
   - i2c over aux I2C_M_STOP support
   - DRM_AUTH handling fixes

  TTM:
   - ref/unref renaming

  New driver:
   - ARM komeda display driver

  scheduler:
   - refactor mirror list handling
   - rework hw fence processing
   - 0 run queue entity fix

  bridge:
   - TI DS90C185 LVDS bridge
   - thc631lvdm83d bridge improvements
   - cadence + allwinner DSI ported to generic phy

  panels:
   - Sitronix ST7701 panel
   - Kingdisplay KD097D04
   - LeMaker BL035-RGB-002
   - PDA 91-00156-A0
   - Innolux EE101IA-01D

  i915:
   - Enable fastboot by default on SKL+/VLV/CHV
   - Export RPCS configuration for ICL media driver
   - Coffelake PCI ID
   - CNL clocks setup fixes
   - ACPI/PMIC support for MIPI/DSI
   - Per-engine WA init for all engines
   - Shrinker locking fixes
   - Kerneldoc updates
   - Lots of ring improvements and reset fixes
   - Coffeelake GVT Support
   - VFIO GVT EDID Region support
   - runtime PM wakeref tracking
   - ILK->IVB primary plane enable delays
   - userptr mutex locking fixes
   - DSI fixes
   - LVDS/TV cleanups
   - HW readout fixes
   - LUT robustness fixes
   - ICL display and watermark fixes
   - gem mmap race fix

  amdgpu:
   - add scheduled dependencies interface
   - DCC on scanout surfaces
   - vega10/20 BACO support
   - Multiple IH rings on soc15
   - XGMI locking fixes
   - DC i2c/aux cleanups
   - runtime SMU debug interface
   - Kexec improvmeents
   - SR-IOV fixes
   - DC freesync + ABM fixes
   - GDS fixes
   - GPUVM fixes
   - vega20 PCIE DPM switching fixes
   - Context priority handling fixes

  radeon:
   - fix missing break in evergreen parser

  nouveau:
   - SVM support via HMM

  msm:
   - QCOM Compressed modifier support

  exynos:
   - s5pv210 rotator support

  imx:
   - zpos property support
   - pending update fixes

  v3d:
   - cache flush improvments

  vc4:
   - reflection support
   - HDMI overscan support

  tegra:
   - CEC refactoring
   - HDMI audio fixes
   - Tegra186 prep work
   - SOR crossbar device tree fixes

  sun4i:
   - implicit fencing support
   - YUV and scalar support improvements
   - A23 support
   - tiling fixes

  atmel-hlcdc:
   - clipping and rotation property fixes

  qxl:
   - BO and PRIME improvements
   - generic fbdev emulation

  dw-hdmi:
   - HDMI 2.0 2160p
   - YUV420 ouput

  rockchip:
   - implicit fencing support
   - reflection proerties

  virtio-gpu:
   - use generic fbdev emulation

  tilcdc:
   - cpufreq vs crtc init fix

  rcar-du:
   - R8A774C0 support
   - D3/E3 RGB output routing fixes and DPAD0 support
   - RA87744 LVDS support

  bochs:
   - atomic and generic fbdev emulation
   - ID mismatch error on bochs load

  meson:
   - remove firmware fbs"

* tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits)
  drm/amd/display: Use vrr friendly pageflip throttling in DC.
  drm/imx: only send commit done event when all state has been applied
  drm/imx: allow building under COMPILE_TEST
  drm/imx: imx-tve: depend on COMMON_CLK
  drm/imx: ipuv3-plane: add zpos property
  drm/imx: ipuv3-plane: add function to query atomic update status
  gpu: ipu-v3: prg: add function to get channel configure status
  gpu: ipu-v3: pre: add double buffer status readback
  drm/amdgpu: Bump amdgpu version for context priority override.
  drm/amdgpu/powerplay: fix typo in BACO header guards
  drm/amdgpu/powerplay: fix return codes in BACO code
  drm/amdgpu: add missing license on baco files
  drm/bochs: Fix the ID mismatch error
  drm/nouveau/dmem: use dma addresses during migration copies
  drm/nouveau/dmem: use physical vram addresses during migration copies
  drm/nouveau/dmem: extend copy function to allow direct use of physical addresses
  drm/nouveau/svm: new ioctl to migrate process memory to GPU memory
  drm/nouveau/dmem: device memory helpers for SVM
  drm/nouveau/svm: initial support for shared virtual memory
  drm/nouveau: prepare for enabling svm with existing userspace interfaces
  ...

Merge branch 'akpm' (patches from Andrew)

Merge more updates from Andrew Morton:

 - some of the rest of MM

 - various misc things

 - dynamic-debug updates

 - checkpatch

 - some epoll speedups

 - autofs

 - rapidio

 - lib/, lib/lzo/ updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (83 commits)
  samples/mic/mpssd/mpssd.h: remove duplicate header
  kernel/fork.c: remove duplicated include
  include/linux/relay.h: fix percpu annotation in struct rchan
  arch/nios2/mm/fault.c: remove duplicate include
  unicore32: stop printing the virtual memory layout
  MAINTAINERS: fix GTA02 entry and mark as orphan
  mm: create the new vm_fault_t type
  arm, s390, unicore32: remove oneliner wrappers for memblock_alloc()
  arch: simplify several early memory allocations
  openrisc: simplify pte_alloc_one_kernel()
  sh: prefer memblock APIs returning virtual address
  microblaze: prefer memblock API returning virtual address
  powerpc: prefer memblock APIs returning virtual address
  lib/lzo: separate lzo-rle from lzo
  lib/lzo: implement run-length encoding
  lib/lzo: fast 8-byte copy on arm64
  lib/lzo: 64-bit CTZ on arm64
  lib/lzo: tidy-up ifdefs
  ipc/sem.c: replace kvmalloc/memset with kvzalloc and use struct_size
  ipc: annotate implicit fall through
  ...

samples/mic/mpssd/mpssd.h: remove duplicate header

Remove duplicate headers which are included more than once

Link: http://lkml.kernel.org/r/20190114170033.GA3674@hp-pavilion-15-notebook-pc-brajeswar
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/fork.c: remove duplicated include

Remove duplicated include.

Link: http://lkml.kernel.org/r/20181209062952.17736-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/relay.h: fix percpu annotation in struct rchan

The percpu member of this structure is declared as:
struct ... ** __percpu member;
So its type is:
__percpu pointer to pointer to struct ...

But looking at how it's used, its type should be:
pointer to __percpu pointer to struct ...
and it should thus be declared as:
struct ... * __percpu *member;

So fix the placement of '__percpu' in the definition of this
structures.

This silents a few Sparse's warnings like:
warning: incorrect type in initializer (different address spaces)
  expected void const [noderef] <asn:3> *__vpp_verify
  got struct sched_domain **

Link: http://lkml.kernel.org/r/20190118144902.79065-1-luc.vanoostenryck@gmail.com
Fixes: 017c59c042d01 ("relay: Use per CPU constructs for the relay channel buffer pointers")
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Jens Axboe <axboe@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/nios2/mm/fault.c: remove duplicate include

Remove linux/ptrace.h which is included more than once

Link: http://lkml.kernel.org/r/5c45d345.1c69fb81.d90ed.8e05@mx.google.com
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

unicore32: stop printing the virtual memory layout

Since commit ad67b74d2469 ("printk: hash addresses printed with %p"),
the virtual memory layout printed during boot up contains "ptrval"
instead of actual addresses.

Instead of changing the printing to "%px", and leaking virtual memory
layout information again, just remove the printing completely, cfr.
e.g.  commits 071929dbdd86 ("arm64: Stop printing the virtual memory
layout") and 31833332f798 ("m68k/mm: Stop printing the virtual memory
layout").

All interesting information (actual section sizes) is already printed by
mem_init_print_info() just above anyway.

Link: http://lkml.kernel.org/r/20190121152254.29079-1-geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: fix GTA02 entry and mark as orphan

The entry for GTA02 never had paths listed; fix that.  commit 9d76295ac608
("[ARM] GTA02/FreeRunner: Add machine definition"), which added the entry
for GTA02, created two new files named
arch/arm/mach-s3c2442/{include/mach/gta02.h,mach-gta02.c}, which were then
renamed in commit dd6f01b5ccba ("ARM: S3C2440: move mach-s3c2440/* into
mach-s3c24xx/") to
arch/arm/mach-s3c24xx/{include/mach/gta02.h,mach-gta02.c}.

Also, the GTA02 maintainer's email address is from a domain that doesn't
have an MX record anymore and appears to have expired.  Remove the
maintainer and mark the subsystem as orphan.

Link: http://lkml.kernel.org/r/20190215140444.37060-1-jannh@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Cc: Nelson Castillo <arhuaco@freaks-unidos.net>
Cc: Nelson Castillo <nelsoneci@gmail.com>
Cc: Andy Green <andy@warmcat.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: create the new vm_fault_t type

Page fault handlers are supposed to return VM_FAULT codes, but some
drivers/file systems mistakenly return error numbers.  Now that all
drivers/file systems have been converted to use the vm_fault_t return
type, change the type definition to no longer be compatible with 'int'.
By making it an unsigned int, the function prototype becomes
incompatible with a function which returns int.  Sparse will detect any
attempts to return a value which is not a VM_FAULT code.

VM_FAULT_SET_HINDEX and VM_FAULT_GET_HINDEX values are changed to avoid
conflict with other VM_FAULT codes.

[jrdr.linux@gmail.com: fix warnings]
Link: http://lkml.kernel.org/r/20190109183742.GA24326@jordon-HP-15-Notebook-PC
Link: http://lkml.kernel.org/r/20190108183041.GA12137@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm, s390, unicore32: remove oneliner wrappers for memblock_alloc()

arm, s390 and unicore32 use oneliner wrappers for memblock_alloc().
Replace their usage with direct call to memblock_alloc().

Link: http://lkml.kernel.org/r/1546248566-14910-7-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch: simplify several early memory allocations

There are several early memory allocations in arch/ code that use
memblock_phys_alloc() to allocate memory, convert the returned physical
address to the virtual address and then set the allocated memory to
zero.

Exactly the same behaviour can be achieved simply by calling
memblock_alloc(): it allocates the memory in the same way as
memblock_phys_alloc(), then it performs the phys_to_virt() conversion
and clears the allocated memory.

Replace the longer sequence with a simpler call to memblock_alloc().

Link: http://lkml.kernel.org/r/1546248566-14910-6-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

openrisc: simplify pte_alloc_one_kernel()

The pte_alloc_one_kernel() function allocates a page using
__get_free_page(GFP_KERNEL) when mm initialization is complete and
memblock_phys_alloc() on the earlier stages.  The physical address of
the page allocated with memblock_phys_alloc() is converted to the
virtual address and in the both cases the allocated page is cleared
using clear_page().

The code is simplified by replacing __get_free_page() with
get_zeroed_page() and by replacing memblock_phys_alloc() with
memblock_alloc().

Link: http://lkml.kernel.org/r/1546248566-14910-5-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Stafford Horne <shorne@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sh: prefer memblock APIs returning virtual address

Rather than use the memblock_alloc_base that returns a physical address
and then convert this address to the virtual one, use appropriate
memblock function that returns a virtual address.

There is a small functional change in the allocation of then
NODE_DATA().  Instead of panicing if the local allocation failed, the
non-local allocation attempt will be made.

Link: http://lkml.kernel.org/r/1546248566-14910-4-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

microblaze: prefer memblock API returning virtual address

Rather than use the memblock_alloc_base that returns a physical address
and then convert this address to the virtual one, use appropriate
memblock function that returns a virtual address.

Link: http://lkml.kernel.org/r/1546248566-14910-3-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc: prefer memblock APIs returning virtual address

Patch series "memblock: simplify several early memory allocation", v4.

These patches simplify some of the early memory allocations by replacing
usage of older memblock APIs with newer and shinier ones.

Quite a few places in the arch/ code allocated memory using a memblock
API that returns a physical address of the allocated area, then
converted this physical address to a virtual one and then used memset(0)
to clear the allocated range.

More recent memblock APIs do all the three steps in one call and their
usage simplifies the code.

It's important to note that regardless of API used, the core allocation
is nearly identical for any set of memblock allocators: first it tries
to find a free memory with all the constraints specified by the caller
and then falls back to the allocation with some or all constraints
disabled.

The first three patches perform the conversion of call sites that have
exact requirements for the node and the possible memory range.

The fourth patch is a bit one-off as it simplifies openrisc's
implementation of pte_alloc_one_kernel(), and not only the memblock
usage.

The fifth patch takes care of simpler cases when the allocation can be
satisfied with a simple call to memblock_alloc().

The sixth patch removes one-liner wrappers for memblock_alloc on arm and
unicore32, as suggested by Christoph.

This patch (of 6):

There are a several places that allocate memory using memblock APIs that
return a physical address, convert the returned address to the virtual
address and frequently also memset(0) the allocated range.

Update these places to use memblock allocators already returning a
virtual address.  Use memblock functions that clear the allocated memory
instead of calling memset(0) where appropriate.

The calls to memblock_alloc_base() that were not followed by memset(0)
are replaced with memblock_alloc_try_nid_raw().  Since the latter does
not panic() when the allocation fails, the appropriate panic() calls are
added to the call sites.

Link: http://lkml.kernel.org/r/1546248566-14910-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mark Salter <msalter@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/lzo: separate lzo-rle from lzo

To prevent any issues with persistent data, separate lzo-rle from lzo so
that it is treated as a separate algorithm, and lzo is still available.

Link: http://lkml.kernel.org/r/20190205155944.16007-3-dave.rodgman@arm.com
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com>
Cc: Matt Sealey <matt.sealey@arm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <nitingupta910@gmail.com>
Cc: Richard Purdie <rpurdie@openedhand.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Sonny Rao <sonnyrao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/lzo: implement run-length encoding

Patch series "lib/lzo: run-length encoding support", v5.

Following on from the previous lzo-rle patchset:

  https://lkml.org/lkml/2018/11/30/972

This patchset contains only the RLE patches, and should be applied on
top of the non-RLE patches ( https://lkml.org/lkml/2019/2/5/366 ).

Previously, some questions were raised around the RLE patches.  I've
done some additional benchmarking to answer these questions.  In short:

 - RLE offers significant additional performance (data-dependent)

 - I didn't measure any regressions that were clearly outside the noise

One concern with this patchset was around performance - specifically,
measuring RLE impact separately from Matt Sealey's patches (CTZ & fast
copy).  I have done some additional benchmarking which I hope clarifies
the benefits of each part of the patchset.

Firstly, I've captured some memory via /dev/fmem from a Chromebook with
many tabs open which is starting to swap, and then split this into 4178
4k pages.  I've excluded the all-zero pages (as zram does), and also the
no-zero pages (which won't tell us anything about RLE performance).
This should give a realistic test dataset for zram.  What I found was
that the data is VERY bimodal: 44% of pages in this dataset contain 5%
or fewer zeros, and 44% contain over 90% zeros (30% if you include the
no-zero pages).  This supports the idea of special-casing zeros in zram.

Next, I've benchmarked four variants of lzo on these pages (on 64-bit
Arm at max frequency): baseline LZO; baseline + Matt Sealey's patches
(aka MS); baseline + RLE only; baseline + MS + RLE.  Numbers are for
weighted roundtrip throughput (the weighting reflects that zram does
more compression than decompression).

  https://drive.google.com/file/d/1VLtLjRVxgUNuWFOxaGPwJYhl_hMQXpHe/view?usp=sharing

Matt's patches help in all cases for Arm (and no effect on Intel), as
expected.

RLE also behaves as expected: with few zeros present, it makes no
difference; above ~75%, it gives a good improvement (50 - 300 MB/s on
top of the benefit from Matt's patches).

Best performance is seen with both MS and RLE patches.

Finally, I have benchmarked the same dataset on an x86-64 device.  Here,
the MS patches make no difference (as expected); RLE helps, similarly as
on Arm.  There were no definite regressions; allowing for observational
error, 0.1% (3/4178) of cases had a regression > 1 standard deviation,
of which the largest was 4.6% (1.2 standard deviations).  I think this
is probably within the noise.

  https://drive.google.com/file/d/1xCUVwmiGD0heEMx5gcVEmLBI4eLaageV/view?usp=sharing

One point to note is that the graphs show RLE appears to help very
slightly with no zeros present! This is because the extra code causes
the clang optimiser to change code layout in a way that happens to have
a significant benefit.  Taking baseline LZO and adding a do-nothing line
like "__builtin_prefetch(out_len);" immediately before the "goto next"
has the same effect.  So this is a real, but basically spurious effect -
it's small enough not to upset the overall findings.

This patch (of 3):

When using zram, we frequently encounter long runs of zero bytes.  This
adds a special case which identifies runs of zeros and encodes them
using run-length encoding.

This is faster for both compression and decompresion.  For high-entropy
data which doesn't hit this case, impact is minimal.

Compression ratio is within a few percent in all cases.

This modifies the bitstream in a way which is backwards compatible
(i.e., we can decompress old bitstreams, but old versions of lzo cannot
decompress new bitstreams).

Link: http://lkml.kernel.org/r/20190205155944.16007-2-dave.rodgman@arm.com
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com>
Cc: Matt Sealey <matt.sealey@arm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <nitingupta910@gmail.com>
Cc: Richard Purdie <rpurdie@openedhand.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Sonny Rao <sonnyrao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/lzo: fast 8-byte copy on arm64

Enable faster 8-byte copies on arm64.

Link: http://lkml.kernel.org/r/20181127161913.23863-6-dave.rodgman@arm.com
Link: http://lkml.kernel.org/r/20190205141950.9058-4-dave.rodgman@arm.com
Signed-off-by: Matt Sealey <matt.sealey@arm.com>
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <nitingupta910@gmail.com>
Cc: Richard Purdie <rpurdie@openedhand.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/lzo: 64-bit CTZ on arm64

LZO leaves some performance on the table by not realising that arm64 can
optimize count-trailing-zeros bit operations.

Add CONFIG_ARM64 to the checked definitions alongside CONFIG_X86_64 to
enable the use of rbit/clz instructions on full 64-bit quantities.

Link: http://lkml.kernel.org/r/20181127161913.23863-5-dave.rodgman@arm.com
Link: http://lkml.kernel.org/r/20190205141950.9058-3-dave.rodgman@arm.com
Signed-off-by: Matt Sealey <matt.sealey@arm.com>
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <nitingupta910@gmail.com>
Cc: Richard Purdie <rpurdie@openedhand.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/lzo: tidy-up ifdefs

Patch series "lib/lzo: performance improvements", v5.

This patch (of 3):

Modify the ifdefs in lzodefs.h to be more consistent with normal kernel
macros (e.g., change __aarch64__ to CONFIG_ARM64).

Link: http://lkml.kernel.org/r/20190205141950.9058-2-dave.rodgman@arm.com
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nitin Gupta <nitingupta910@gmail.com>
Cc: Richard Purdie <rpurdie@openedhand.com>
Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matt Sealey <matt.sealey@arm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc/sem.c: replace kvmalloc/memset with kvzalloc and use struct_size

Use kvzalloc() instead of kvmalloc() and memset().

Also, make use of the struct_size() helper instead of the open-coded
version in order to avoid any potential type mistakes.

This code was detected with the help of Coccinelle.

Link: http://lkml.kernel.org/r/20190131214221.GA28930@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc: annotate implicit fall through

There is a plan to build the kernel with -Wimplicit-fallthrough and this
place in the code produced a warning (W=1).

This commit remove the following warning:

  ipc/sem.c:1683:6: warning: this statement may fall through [-Wimplicit-fallthrough=]

Link: http://lkml.kernel.org/r/20190114203608.18218-1-malat@debian.org
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init/initramfs.c: provide more details in error messages

Use distinct error messages when archive decompression failed.

Link: http://lkml.kernel.org/r/20190212075635.7373-1-david.engraf@sysgo.com
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/ubsan: default UBSAN_ALIGNMENT to not set

When booting an allmodconfig kernel, there are a lot of false-positives.
With a message like this 'UBSAN: Undefined behaviour in...' with a call
trace that follows.

UBSAN warnings are a result of enabling noisy CONFIG_UBSAN_ALIGNMENT
which is disabled by default if HAVE_EFFICIENT_UNALIGNED_ACCESS=y.

It's noisy even if don't have efficient unaligned access, e.g.  people
often add __cacheline_aligned_in_smp in structs, but forget to align
allocations of such struct (kmalloc() give 8-byte alignment in worst
case).

Rework so that when building a allmodconfig kernel that turns everything
into '=m' or '=y' will turn off UBSAN_ALIGNMENT.

[aryabinin@virtuozzo.com: changelog addition]
Link: http://lkml.kernel.org/r/20181217150326.30933-1-anders.roxell@linaro.org
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/gdb: replace flags (MS_xyz -> SB_xyz)

Since commit 1751e8a6cb93 ("Rename superblock flags (MS_xyz ->
SB_xyz)"), scripts/gdb should be updated to replace MS_xyz with SB_xyz.

This change didn't directly affect the running operation of scripts/gdb
until commit e262e32d6bde "vfs: Suppress MS_* flag defs within the
kernel unless explicitly enabled" removed the definitions used by
constants.py.

Update constants.py.in to utilise the new internal flags, matching the
implementation at fs/proc_namespace.c::show_sb_opts.

Note to stable, e262e32d6bde landed in v5.0-rc1 (which was just
released), so we'll want this picked back to 5.0 stable once this patch
hits mainline (akpm just picked it up).  Without this, debugging a
kernel a kernel via GDB+QEMU is broken in the 5.0 release.

[kieran.bingham@ideasonboard.com: add fixes tag, reword commit message]
Link: http://lkml.kernel.org/r/20190305103014.25847-1-kieran.bingham@ideasonboard.com
Fixes: e262e32d6bde "vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled"
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Dan Robertson <danlrobertson89@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kcov: convert kcov.refcount to refcount_t

atomic_t variables are currently used to implement reference
counters with the following properties:

 - counter is initialized to 1 using atomic_set()

 - a resource is freed upon counter reaching zero

 - once counter reaches zero, its further
   increments aren't allowed

 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided refcount_t
type and API that prevents accidental counter overflows and underflows.
This is important since overflows and underflows can lead to
use-after-free situation and be exploitable.

The variable kcov.refcount is used as pure reference counter.  Convert
it to refcount_t and fix up the operations.

**Important note for maintainers:

Some functions from refcount_t API defined in lib/refcount.c have
different memory ordering guarantees than their atomic counterparts.

The full comparison can be seen in https://lkml.org/lkml/2017/11/15/57
and it is hopefully soon in state to be merged to the documentation
tree.  Normally the differences should not matter since refcount_t
provides enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.  Please double check that you don't
have some undocumented memory guarantees for this variable usage.

For the kcov.refcount it might make a difference
in following places:
 - kcov_put(): decrement in refcount_dec_and_test() only
   provides RELEASE ordering and control dependency on success
   vs. fully ordered atomic counterpart

Link: http://lkml.kernel.org/r/1547634429-772-1-git-send-email-elena.reshetova@intel.com
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kcov: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Link: http://lkml.kernel.org/r/20190122152151.16139-46-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/configs: use .incbin directive to embed config_data.gz

This slightly optimizes the kernel/configs.c build.

bin2c is not very efficient because it converts a data file into a huge
array to embed it into a *.c file.

Instead, we can use the .incbin directive.

Also, this simplifies the code; Makefile is cleaner, and the way to get
the offset/size of the config_data.gz is more straightforward.

I used the "asm" statement in *.c instead of splitting it into *.S
because MODULE_* tags are not supported in *.S files.

I also cleaned up kernel/.gitignore; "config_data.gz" is unneeded
because the top-level .gitignore takes care of the "*.gz" pattern.

[yamada.masahiro@socionext.com: v2]
Link: http://lkml.kernel.org/r/1550108893-21226-1-git-send-email-yamada.masahiro@socionext.com
Link: http://lkml.kernel.org/r/1549941160-8084-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

configs: get rid of obsolete CONFIG_ENABLE_WARN_DEPRECATED

This Kconfig option was removed during v4.19 development in commit
771c035372a0 ("deprecate the '__deprecated' attribute warnings entirely
and for good") so there's no point to keep it in defconfigs any longer.

FWIW defconfigs were patched with:
--------------------------->8----------------------
find . -name *_defconfig -exec sed -i '/CONFIG_ENABLE_WARN_DEPRECATED/d' {} \;
--------------------------->8----------------------

Link: http://lkml.kernel.org/r/20190128152434.41969-1-abrodkin@synopsys.com
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/gcov/gcc_3_4.c: use struct_size() in kzalloc()

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array.  For example:

  struct foo {
      int stuff;
      void *entry[];
  };

  instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

  instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.

Link: http://lkml.kernel.org/r/20190109172445.GA15908@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: handle overflow for file-max

Currently, when writing

  echo 18446744073709551616 > /proc/sys/fs/file-max

/proc/sys/fs/file-max will overflow and be set to 0.  That quickly
crashes the system.

This commit sets the max and min value for file-max.  The max value is
set to long int.  Any higher value cannot currently be used as the
percpu counters are long ints and not unsigned integers.

Note that the file-max value is ultimately parsed via
__do_proc_doulongvec_minmax().  This function does not report error when
min or max are exceeded.  Which means if a value largen that long int is
written userspace will not receive an error instead the old value will be
kept.  There is an argument to be made that this should be changed and
__do_proc_doulongvec_minmax() should return an error when a dedicated min
or max value are exceeded.  However this has the potential to break
userspace so let's defer this to an RFC patch.

Link: http://lkml.kernel.org/r/20190107222700.15954-3-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Waiman Long <longman@redhat.com>
[christian@brauner.io: v4]
Link: http://lkml.kernel.org/r/20190210203943.8227-3-christian@brauner.io
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: handle overflow in proc_get_long

proc_get_long() is a funny function.  It uses simple_strtoul() and for a
good reason.  proc_get_long() wants to always succeed the parse and
return the maybe incorrect value and the trailing characters to check
against a pre-defined list of acceptable trailing values.  However,
simple_strtoul() explicitly ignores overflows which can cause funny
things like the following to happen:

  echo 18446744073709551616 > /proc/sys/fs/file-max
  cat /proc/sys/fs/file-max
  0

(Which will cause your system to silently die behind your back.)

On the other hand kstrtoul() does do overflow detection but does not
return the trailing characters, and also fails the parse when anything
other than '\n' is a trailing character whereas proc_get_long() wants to
be more lenient.

Now, before adding another kstrtoul() function let's simply add a static
parse strtoul_lenient() which:
 - fails on overflow with -ERANGE
 - returns the trailing characters to the caller

The reason why we should fail on ERANGE is that we already do a partial
fail on overflow right now.  Namely, when the TMPBUFLEN is exceeded.  So
we already reject values such as 184467440737095516160 (21 chars) but
accept values such as 18446744073709551616 (20 chars) but both are
overflows.  So we should just always reject 64bit overflows and not
special-case this based on the number of chars.

Link: http://lkml.kernel.org/r/20190107222700.15954-2-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rapidio/mport_cdev: mark expected switch fall-through

In preparation for enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

This patch fixes the following warning:

  drivers/rapidio/devices/rio_mport_cdev.c: In function `mport_release_mapping':
  drivers/rapidio/devices/rio_mport_cdev.c:2151:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
     rio_unmap_inb_region(mport, map->phys_addr);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    CC      drivers/regulator/fixed-helper.o
    CC      drivers/pinctrl/stm32/pinctrl-stm32f429.o
  drivers/rapidio/devices/rio_mport_cdev.c:2152:2: note: here
    case MAP_DMA:
    ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.

Link: http://lkml.kernel.org/r/20190212175014.GA14326@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rapidio/rio_cm.c: fix potential oops in riocm_ch_listen()

If riocm_get_channel() fails, then we should just return -EINVAL.
Calling riocm_put_channel() will trigger a NULL dereference and
generally we should call put() if the get() didn't succeed.

Link: http://lkml.kernel.org/r/20190110130230.GB27017@kadam
Fixes: b6e8d4aa1110 ("rapidio: add RapidIO channelized messaging driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel: workqueue: clarify wq_worker_last_func() caller requirements

This function can only be called safely from very specific scheduler
contexts.  Document those.

Link: http://lkml.kernel.org/r/20190206150528.31198-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

exec: increase BINPRM_BUF_SIZE to 256

Large enterprise clients often run applications out of networked file
systems where the IT mandated layout of project volumes can end up
leading to paths that are longer than 128 characters.  Bumping this up
to the next order of two solves this problem in all but the most
egregious case while still fitting into a 512b slab.

[oleg@redhat.com: update comment, per Kees]
Link: http://lkml.kernel.org/r/20181112160956.GA28472@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Ben Woodard <woodard@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/exec.c: replace opencoded set_mask_bits()

Link: http://lkml.kernel.org/r/1548275584-18096-2-git-send-email-vgupta@synopsys.com
Link: http://lkml.kernel.org/g/20150807115710.GA16897@redhat.com
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fat: enable .splice_write to support splice on O_DIRECT file

Now splice() on O_DIRECT-opened fat file will return -EFAULT, that is
because the default .splice_write, namely default_file_splice_write(),
will construct an ITER_KVEC iov_iter and dio_refill_pages() in dio path
can not handle it.

Fix it by implementing .splice_write through iter_file_splice_write().

Spotted by xfs-tests generic/091.

Link: http://lkml.kernel.org/r/20190210094754.56355-1-houtao1@huawei.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: clear O_NONBLOCK on the pipe

autofs does not expect the pipe it is given to have O_NONBLOCK set -
specifically if __kernel_write() in autofs_write() returns -EAGAIN, this
is treated as a fatal error and the pipe is closed.

For safety autofs should, therefore, clear the O_NONBLOCK flag.

Releases of systemd prior to 8th February 2019 used
  pipe2(p, O_NONBLOCK|O_CLOEXEC)
and thus (inadvertently) set this flag.

Link: http://lkml.kernel.org/r/154993550902.3321.1183632970046073478.stgit@pluto-themaw-net
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/autofs/inode.c: use seq_puts() for simple strings in autofs_show_options()

Fix checkpatch.sh WARNING about the use of seq_printf() to print simple
strings in autofs_show_options(), use seq_puts() in this case.

Link: http://lkml.kernel.org/r/154889012613.4863.12231175554744203482.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: add ignore mount option

Add an autofs file system mount option that can be used to provide a
generic indicator to applications that the mount entry should be ignored
when displaying mount information.

In other OSes that provide autofs and that provide a mount list to user
space based on the kernel mount list a no-op mount option ("ignore" is
the one use on the most common OS) is allowed so that autofs file system
users can optionally use it.

The idea is that it be used by user space programs to exclude autofs
mounts from consideration when reading the mounts list.

Prior to the change to link /etc/mtab to /proc/self/mounts all I needed
to do to achieve this was to use mount(2) and not update the mtab but
now that no longer works.

I know the symlinking happened a long time ago and I considered doing
this then but, at the time I couldn't remember the commonly used option
name and thought persuading the various utility maintainers would be too
hard.

But now I have a RHEL request to do this for compatibility for a widely
used product so I want to go ahead with it and try and enlist the help
of some utility package maintainers.

Clearly, without the option nothing can be done so it's at least a
start.

Link: http://lkml.kernel.org/r/154725123970.11260.6113771566924907275.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init/calibrate.c: provide proper prototype

Sparse issues a warning:

    CHECK   init/calibrate.c
  init/calibrate.c:271:28: warning: symbol 'calibration_delay_done' was not declared. Should it be static?

The actual issue is that it's a __weak symbol that archs can override
(in fact, ARM does so), but no prototype is provided.  Let's provide one
to prevent surprises.

Link: http://lkml.kernel.org/r/18827.1548750938@turing-police.cc.vt.edu
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/binfmt_elf.c: spread const a little

Link: http://lkml.kernel.org/r/20190204202830.GC27482@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/binfmt_elf.c: use list_for_each_entry()

[adobriyan@gmail.com: fixup compilation]
Link: http://lkml.kernel.org/r/20190205064334.GA2152@avx2
Link: http://lkml.kernel.org/r/20190204202800.GB27482@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/binfmt_elf.c: don't be afraid of overflow

Number of ELF program headers is 16-bit by spec, so total size
comfortably fits into "unsigned int".

Space savings: 7 bytes!

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-7 (-7)
Function                                     old     new   delta
load_elf_phdrs                               137     130      -7

Link: http://lkml.kernel.org/r/20190204202715.GA27482@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

epoll: use rwlock in order to reduce ep_poll_callback() contention

The goal of this patch is to reduce contention of ep_poll_callback()
which can be called concurrently from different CPUs in case of high
events rates and many fds per epoll.  Problem can be very well
reproduced by generating events (write to pipe or eventfd) from many
threads, while consumer thread does polling.  In other words this patch
increases the bandwidth of events which can be delivered from sources to
the poller by adding poll items in a lockless way to the list.

The main change is in replacement of the spinlock with a rwlock, which
is taken on read in ep_poll_callback(), and then by adding poll items to
the tail of the list using xchg atomic instruction.  Write lock is taken
everywhere else in order to stop list modifications and guarantee that
list updates are fully completed (I assume that write side of a rwlock
does not starve, it seems qrwlock implementation has these guarantees).

The following are some microbenchmark results based on the test [1]
which starts threads which generate N events each.  The test ends when
all events are successfully fetched by the poller thread:

 spinlock
 ========

 threads  events/ms  run-time ms
       8       6402        12495
      16       7045        22709
      32       7395        43268

 rwlock + xchg
 =============

 threads  events/ms  run-time ms
       8      10038         7969
      16      12178        13138
      32      13223        24199

According to the results bandwidth of delivered events is significantly
increased, thus execution time is reduced.

This patch was tested with different sort of microbenchmarks and
artificial delays (e.g.  "udelay(get_random_int() & 0xff)") introduced
in kernel on paths where items are added to lists.

[1] https://github.com/rouming/test-tools/blob/master/stress-epoll.c

Link: http://lkml.kernel.org/r/20190103150104.17128-5-rpenyaev@suse.de
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

epoll: unify awaking of wakeup source on ep_poll_callback() path

Original comment "Activate ep->ws since epi->ws may get deactivated at
any time" indeed sounds loud, but it is incorrect, because the path
where we check epi->ws is a path where insert to ovflist happens, i.e.
ep_scan_ready_list() has taken ep->mtx and waits for this callback to
finish, thus ep_modify() (which unregisters wakeup source) waits for
ep_scan_ready_list().

Here in this patch I simply call ep_pm_stay_awake_rcu(), which is a bit
extra for this path (indirectly protected by main ep->mtx, so even rcu
is not needed), but I do not want to create another naked
__ep_pm_stay_awake() variant only for this particular case, so rcu variant
is just better for all the cases.

Link: http://lkml.kernel.org/r/20190103150104.17128-4-rpenyaev@suse.de
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

epoll: make sure all elements in ready list are in FIFO order

Patch series "use rwlock in order to reduce ep_poll_callback()
contention", v3.

The last patch targets the contention problem in ep_poll_callback(),
which can be very well reproduced by generating events (write to pipe or
eventfd) from many threads, while consumer thread does polling.

The following are some microbenchmark results based on the test [1]
which starts threads which generate N events each.  The test ends when
all events are successfully fetched by the poller thread:

 spinlock
 ========

 threads  events/ms  run-time ms
       8       6402        12495
      16       7045        22709
      32       7395        43268

 rwlock + xchg
 =============

 threads  events/ms  run-time ms
       8      10038         7969
      16      12178        13138
      32      13223        24199

According to the results bandwidth of delivered events is significantly
increased, thus execution time is reduced.

This patch (of 4):

All coming events are stored in FIFO order and this is also should be
applicable to ->ovflist, which originally is stack, i.e.  LIFO.

Thus to keep correct FIFO order ->ovflist should reversed by adding
elements to the head of the read list but not to the tail.

Link: http://lkml.kernel.org/r/20190103150104.17128-2-rpenyaev@suse.de
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add test for SPDX-License-Identifier on wrong line #

Warn when any SPDX-License-Identifier: tag is not created on the proper
line number.

Link: http://lkml.kernel.org/r/9b74ee87f8c1b8fd310e213fcb4994d58610fcb6.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "Enrico Weigelt, metux IT consult" <lkml@metux.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: allow reporting C99 style comments

Presently C99 style comments are removed unconditionally before actual
patch validity check happens.  This is a problem for some third party
projects which use checkpatch.pl but do not allow C99 style comments.

This patch adds yet another variable, named C99_COMMENT_TOLERANCE.  If
it is included in the --ignore command line or config file options list,
C99 comments in the patch are reported as errors.

Tested by processing a patch with a C99 style comment, it passes the
check just fine unless '--ignore C99_COMMENT_TOLERANCE' is present in
.checkpatch.conf.

Link: http://lkml.kernel.org/r/20190110224957.25008-1-vbendeb@chromium.org
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add some new alloc functions to various tests

Many new generic allocation functions like the kvmalloc family have been
added recently to the kernel.

The allocation functions test now includes:

o kvmalloc and variants
o kstrdup_const
o kmemdup_nul
o dma_alloc_coherent
o alloc_skb and variants

Add a separate $allocFunctions variable to help make the allocation
functions test a bit more readable.

Miscellanea:

o Use $allocFunctions in the unnecessary OOM message test and
  add exclude uses with __GFP_NOWARN
o Use $allocFunctions in the unnecessary cast test
o Add the kvmalloc family to the preferred sizeof alloc style
  foo = kvmalloc(sizeof(*foo), ...)

Link: http://lkml.kernel.org/r/a5e60a2b93e10baf84af063f6c8e56402273105d.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: verify SPDX comment style

Using SPDX commenting style // or /* is specified for various file types
in Documentation/process/license-rules.rst so add an appropriate test for
.[chsS] files because many proposed file additions and patches do not use
the correct style.

Link: http://lkml.kernel.org/r/8b02899853247a2c67669561761f354dd3bd110e.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test_firmware.c: remove some dead code

The test_fw_config->reqs allocation succeeded so these addresses can't
be NULL.

Also on the second error path, we forgot to set "rc = -ENOMEM;".

Link: http://lkml.kernel.org/r/20190221183700.GA1737@kadam
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/assoc_array.c: mark expected switch fall-through

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

This patch fixes the following warning:

  lib/assoc_array.c: In function `assoc_array_delete':
  lib/assoc_array.c:1110:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
     for (slot = 0; slot < ASSOC_ARRAY_FAN_OUT; slot++) {
     ^~~
  lib/assoc_array.c:1118:2: note: here
    case assoc_array_walk_tree_empty:
    ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.

Link: http://lkml.kernel.org/r/20190212212206.GA16378@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test_ubsan.c: VLA no longer used in kernel

Since we now build with -Wvla, any use of VLA throws a warning.
Including this test, so...  maybe we should just remove the test?

  lib/test_ubsan.c: In function 'test_ubsan_vla_bound_not_positive':
  lib/test_ubsan.c:48:2: warning: ISO C90 forbids variable length array 'buf' [-Wvla]

For the out-of-bounds test, switch to non-VLA setup.

  lib/test_ubsan.c: In function 'test_ubsan_out_of_bounds':
  lib/test_ubsan.c:64:2: warning: ISO C90 forbids variable length array 'arr' [-Wvla]

Link: http://lkml.kernel.org/r/20190113183210.56154-1-olof@lixom.net
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Jinbum Park <jinb.park7@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/div64.c: off by one in shift

fls counts bits starting from 1 to 32 (returns 0 for zero argument).  If
we add 1 we shift right one bit more and loose precision from divisor,
what cause function incorect results with some numbers.

Corrected code was tested in user-space, see bugzilla:
   https://bugzilla.kernel.org/show_bug.cgi?id=202391

Link: http://lkml.kernel.org/r/1548686944-11891-1-git-send-email-sgruszka@redhat.com
Fixes: 658716d19f8f ("div64_u64(): improve precision on 32bit platforms")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Reported-by: Siarhei Volkau <lis8215@gmail.com>
Tested-by: Siarhei Volkau <lis8215@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/bitops.h: set_mask_bits() to return old value

| > Also, set_mask_bits is used in fs quite a bit and we can possibly come up
| > with a generic llsc based implementation (w/o the cmpxchg loop)
|
| May I also suggest changing the return value of set_mask_bits() to old.
|
| You can compute the new value given old, but you cannot compute the old
| value given new, therefore old is the better return value. Also, no
| current user seems to use the return value, so changing it is without
| risk.

Link: http://lkml.kernel.org/g/20150807110955.GH16853@twins.programming.kicks-ass.net
Link: http://lkml.kernel.org/r/1548275584-18096-4-git-send-email-vgupta@synopsys.com
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ACPI: implement acpi_handle_debug in terms of _dynamic_func_call

With coming changes on x86-64, all dynamic debug descriptors in a
translation unit must have distinct names.  The macro _dynamic_func_call
takes care of that.  No functional change.

Link: http://lkml.kernel.org/r/20190212214150.4807-15-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ACPI: remove unused __acpi_handle_debug macro

If CONFIG_DYNAMIC_DEBUG is not set, acpi_handle_debug directly invokes
acpi_handle_printk (if DEBUG) or does a no-printk (if !DEBUG).  So this
macro is never used.

Link: http://lkml.kernel.org/r/20190212214150.4807-14-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ACPI: use proper DYNAMIC_DEBUG_BRANCH macro

dynamic debug may be implemented via static keys, but ACPI is missing
out on that runtime benefit since it open-codes one possible definition
of DYNAMIC_DEBUG_BRANCH.

Link: http://lkml.kernel.org/r/20190212214150.4807-13-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

btrfs: implement btrfs_debug* in terms of helper macro

First, the btrfs_debug macros open-code (one possible definition of)
DYNAMIC_DEBUG_BRANCH, so they don't benefit from the CONFIG_JUMP_LABEL
optimization.

Second, a planned change of struct _ddebug (to reduce its size on 64 bit
machines) requires that all descriptors in a translation unit use
distinct identifiers.

Using the new _dynamic_func_call_no_desc helper macro from
dynamic_debug.h takes care of both of these.  No functional change.

Link: http://lkml.kernel.org/r/20190212214150.4807-12-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dynamic_debug: refactor dynamic_pr_debug and friends

For the upcoming 'define the _ddebug descriptor in assembly', we need
all the descriptors in a translation unit to have distinct names
(because asm does not understand C scope).  The easiest way to achieve
that is as usual with an extra level of macros, passing the identifier
to use to the innermost macro, generating it via __UNIQUE_ID or
something.

However, instead of repeating that exercise for dynamic_pr_debug,
dynamic_dev_dbg, dynamic_netdev_dbg and dynamic_hex_dump separately, we
can use the similarity between their bodies to implement them via a
common macro, _dynamic_func_call - though the hex_dump case requires a
slight variant, since print_hex_dump does not take the _ddebug
descriptor.  We'll also get to use that variant elsewhere (btrfs).

Link: http://lkml.kernel.org/r/20190212214150.4807-11-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dynamic_debug: add static inline stub for ddebug_add_module

For symmetry with ddebug_remove_module, and to avoid a bit of ifdeffery
in module.c, move the declaration of ddebug_add_module inside #if
defined(CONFIG_DYNAMIC_DEBUG) and add a corresponding no-op stub in the
#else branch.

Link: http://lkml.kernel.org/r/20190212214150.4807-10-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dynamic_debug: move pr_err from module.c to ddebug_add_module

This serves two purposes: First, we get a diagnostic if (though
extremely unlikely), any of the calls of ddebug_add_module for built-in
code fails, effectively disabling dynamic_debug.  Second, I want to make
struct _ddebug opaque, and avoid accessing any of its members outside
dynamic_debug.[ch].

Link: http://lkml.kernel.org/r/20190212214150.4807-9-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dynamic_debug: remove unused EXPORT_SYMBOLs

The only caller of ddebug_{add,remove}_module outside dynamic_debug.c is
kernel/module.c, which is obviously not itself modular (though it would
be an interesting exercise to make that happen...).  I also fail to see
how these interfaces can be used by modules, in-tree or not.

Link: http://lkml.kernel.org/r/20190212214150.4807-8-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dynamic_debug: use pointer comparison in ddebug_remove_module

Now that we store the passed-in string directly in ddebug_add_module, we
can use pointer equality instead of strcmp.  This is a little more
efficient, but more importantly, this also makes the code somewhat more
correct:

Currently, if one loads and then unloads a module whose name happens to
match the KBUILD_MODNAME of some built-in functionality (which need not
even be modular at all), all of their dynamic debug entries vanish along
with those of the actual module.  For example, loading and unloading a
core.ko hides all pr_debugs from drivers/base/core.c and other built-in
files called core.c (incidentally, there is an in-tree module whose name
is core, but I just tested this with an out-of-tree trivial one).

Link: http://lkml.kernel.org/r/20190212214150.4807-7-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dynamic_debug: don't duplicate modname in ddebug_add_module

For built-in modules, we're already reusing the passed-in string via
kstrdup_const().  But for actual modules (i.e.  when we're called from
dynamic_debug_setup in module.c), the passed-in string (which points at
the name[] array inside struct module) is also guaranteed to live at
least as long as the struct ddebug_table, since free_module() calls
ddebug_remove_module().

Link: http://lkml.kernel.org/r/20190212214150.4807-6-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dynamic_debug: consolidate DEFINE_DYNAMIC_DEBUG_METADATA definitions

Instead of defining DEFINE_DYNAMIC_DEBUG_METADATA in terms of a helper
DEFINE_DYNAMIC_DEBUG_METADATA_KEY, that needs another helper dd_key_init
to be properly defined, just make the various #ifdef branches define a
_DPRINTK_KEY_INIT that can be used directly, similar to
_DPRINTK_FLAGS_DEFAULT.

Link: http://lkml.kernel.org/r/20190212214150.4807-5-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/printk.h: use DYNAMIC_DEBUG_BRANCH in pr_debug_ratelimited

pr_debug_ratelimited tests the dynamic debug descriptor the
old-fashioned way, and doesn't utilize the static key/jump label
implementation when CONFIG_JUMP_LABEL is set.  Use the
DYNAMIC_DEBUG_BRANCH which is defined appropriately.

Link: http://lkml.kernel.org/r/20190212214150.4807-4-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/net.h: use DYNAMIC_DEBUG_BRANCH in net_dbg_ratelimited

net_dbg_ratelimited tests the dynamic debug descriptor the old-fashioned
way, and doesn't utilize the static key/jump label implementation when
CONFIG_JUMP_LABEL is set.  Use the DYNAMIC_DEBUG_BRANCH which is defined
appropriately.

Link: http://lkml.kernel.org/r/20190212214150.4807-3-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/device.h: use DYNAMIC_DEBUG_BRANCH in dev_dbg_ratelimited

Patch series "various dynamic_debug patches", v4.

This started as an experiment to see how hard it would be to change the
four pointers in struct _ddebug into relative offsets, a la
CONFIG_GENERIC_BUG_RELATIVE_POINTERS, thus saving 16 bytes per pr_debug
site (and thus exactly making up for the extra space used by the
introduction of jump labels in 9049fc74).  I stumbled on a few things
that are probably worth fixing regardless of whether that goal is deemed
worthwhile.

Back at v3 (in November), I redid the implementation on top of the fancy
new asm-macros stuff.  Luckily enough, v3 didn't get picked up, since
the asm-macros were backed out again.  I still want to do the
relative-pointers thing eventually, but we're close to the merge window
opening, so here's just most of the "incidental" patches, some of which
also serve as preparation for the relative pointers.

This patch (of 4):

dev_dbg_ratelimited tests the dynamic debug descriptor the old-fashioned
way, and doesn't utilize the static key/jump label implementation when
CONFIG_JUMP_LABEL is set.  Use the DYNAMIC_DEBUG_BRANCH which is defined
appropriately.

Link: http://lkml.kernel.org/r/20190212214150.4807-2-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/pid.h: remove next_pidmap() declaration

Commit 95846ecf9dac ("pid: replace pid bitmap implementation with IDR
API") removed next_pidmap() but left its declaration.

Remove it.  No functional change.

Link: http://lkml.kernel.org/r/20190213113736.21922-1-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/kernel.h: split *_MAX and *_MIN macros into <linux/limits.h>

<linux/kernel.h> tends to be cluttered because we often put various sort
of unrelated stuff in it.  So, we have split out a sensible chunk of
code into a separate header from time to time.

This commit splits out the *_MAX and *_MIN defines.

The standard header <limits.h> contains various MAX, MIN constants
including numerial limits.  [1]

I think it makes sense to move in-kernel MAX, MIN constants into
include/linux/limits.h.

We already have include/uapi/linux/limits.h to contain some user-space
constants.  I changed its include guard to _UAPI_LINUX_LIMITS_H.  This
change has no impact to the user-space because
scripts/headers_install.sh rips off the '_UAPI' prefix from the include
guards of exported headers.

[1] http://pubs.opengroup.org/onlinepubs/009604499/basedefs/limits.h.html

Link: http://lkml.kernel.org/r/1549156242-20806-2-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Alex Elder <elder@linaro.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/kernel.h: use 'short' to define USHRT_MAX, SHRT_MAX, SHRT_MIN

The commit log of 44f564a4bf6a ("ipc: add definitions of USHORT_MAX and
others") did not explain why it used (s16) and (u16) instead of (short)
and (unsigned short).

Let's use (short) and (unsigned short), which is more sensible, and more
consistent with the other MAX/MIN defines.

As you see in include/uapi/asm-generic/int-ll64.h, s16/u16 are
typedef'ed as signed/unsigned short.  So, this commit does not have a
functional change.

Remove the unneeded parentheses around ~0U while we are here.

Link: http://lkml.kernel.org/r/1549156242-20806-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Zhang Yanmin <yanmin.zhang@intel.com>
Cc: Alex Elder <elder@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/fs.h: move member alignment check next to definition of struct filename

Instead of doing this compile-time check in some slightly arbitrary user
of struct filename, put it next to the definition.

Link: http://lkml.kernel.org/r/20190208203015.29702-3-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/vsprintf.c: move sizeof(struct printf_spec) next to its definition

At the time of commit d048419311ff ("lib/vsprintf.c: expand field_width
to 24 bits"), there was no compiletime_assert/BUILD_BUG/....  variant
that could be used outside function scope.  Now we have static_assert(),
so move the assertion next to the definition instead of hiding it in
some arbitrary function.

Also add the appropriate #include to avoid relying on build_bug.h being
pulled in via some arbitrary chain of includes.

Link: http://lkml.kernel.org/r/20190208203015.29702-2-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

build_bug.h: add wrapper for _Static_assert

BUILD_BUG_ON() is a little annoying, since it cannot be used outside
function scope.  So one cannot put assertions about the sizeof() a
struct next to the struct definition, but has to hide that in some more
or less arbitrary function.

Since gcc 4.6 (which is now also the required minimum), there is support
for the C11 _Static_assert in all C modes, including gnu89.  So add a
simple wrapper for that.

_Static_assert() requires a message argument, which is usually quite
redundant (and I believe that bug got fixed at least in newer C++
standards), but we can easily work around that with a little macro
magic, making it optional.

For example, adding

  static_assert(sizeof(struct printf_spec) == 8);

in vsprintf.c and modifying that struct to violate it, one gets

./include/linux/build_bug.h:78:41: error: static assertion failed: "sizeof(struct printf_spec) == 8"
 #define __static_assert(expr, msg, ...) _Static_assert(expr, "" msg "")

godbolt.org suggests that _Static_assert() has been support by clang
since at least 3.0.0.

Link: http://lkml.kernel.org/r/20190208203015.29702-1-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/spelling.txt: add more spellings to spelling.txt

Here are some of the more common spelling mistakes and typos that I've
found while fixing up spelling mistakes in the kernel over the past 4
months.

Link: http://lkml.kernel.org/r/20190114110215.1986-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/sys: annotate implicit fall through

There is a plan to build the kernel with -Wimplicit-fallthrough and this
place in the code produced a warning (W=1).

This commit remove the following warning:

  kernel/sys.c:1748:6: warning: this statement may fall through [-Wimplicit-fallthrough=]

Link: http://lkml.kernel.org/r/20190114203347.17530-1-malat@debian.org
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/hung_task.c: Use continuously blocked time when reporting.

Since commit a2e514453861 ("kernel/hung_task.c: allow to set checking
interval separately from timeout") added hung_task_check_interval_secs,
setting a value different from hung_task_timeout_secs

  echo 0 > /proc/sys/kernel/hung_task_panic
  echo 120 > /proc/sys/kernel/hung_task_timeout_secs
  echo 5 > /proc/sys/kernel/hung_task_check_interval_secs

causes confusing output as if the task was blocked for
hung_task_timeout_secs seconds from the previous report.

  [  399.395930] INFO: task kswapd0:75 blocked for more than 120 seconds.
  [  405.027637] INFO: task kswapd0:75 blocked for more than 120 seconds.
  [  410.659725] INFO: task kswapd0:75 blocked for more than 120 seconds.
  [  416.292860] INFO: task kswapd0:75 blocked for more than 120 seconds.
  [  421.932305] INFO: task kswapd0:75 blocked for more than 120 seconds.

Although we could update t->last_switch_time after sched_show_task(t) if
we want to report only every 120 seconds, reporting every 5 seconds
might not be very bad for monitoring after a problematic situation has
started.  Thus, let's use continuously blocked time instead of updating
previously reported time.

  [  677.985011] INFO: task kswapd0:80 blocked for more than 122 seconds.
  [  693.856126] INFO: task kswapd0:80 blocked for more than 138 seconds.
  [  709.728075] INFO: task kswapd0:80 blocked for more than 154 seconds.
  [  725.600018] INFO: task kswapd0:80 blocked for more than 170 seconds.
  [  741.473133] INFO: task kswapd0:80 blocked for more than 186 seconds.

Link: http://lkml.kernel.org/r/1551175083-10669-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/hung_task.c - fix sparse warnings

sparse complains:

    CHECK   kernel/hung_task.c
  kernel/hung_task.c:28:19: warning: symbol 'sysctl_hung_task_check_count' was not declared. Should it be static?
  kernel/hung_task.c:42:29: warning: symbol 'sysctl_hung_task_timeout_secs' was not declared. Should it be static?
  kernel/hung_task.c:47:29: warning: symbol 'sysctl_hung_task_check_interval_secs' was not declared. Should it be static?
  kernel/hung_task.c:49:19: warning: symbol 'sysctl_hung_task_warnings' was not declared. Should it be static?
  kernel/hung_task.c:61:28: warning: symbol 'sysctl_hung_task_panic' was not declared. Should it be static?
  kernel/hung_task.c:219:5: warning: symbol 'proc_dohung_task_timeout_secs' was not declared. Should it be static?

Add the appropriate header file to provide declarations.

Link: http://lkml.kernel.org/r/467.1548649525@turing-police.cc.vt.edu
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/types.h: use "unsigned int" instead of "unsigned"

Use "unsigned int" instead of "unsigned", to make code more clear.

Link: http://lkml.kernel.org/r/1551354739-6648-1-git-send-email-wdjjwb@163.com
Signed-off-by: WangBo <wang.bo116@zte.com.cn>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

<linux/kernel.h>: drop the gcc-3.3 'const' hack in roundup()

The single quotation marks around "const" were causing a documentation
markup warning with reST.  Instead of fixing that warning, just delete
that comment line and the gcc-3.3 hack of using "const" in the roundup()
macro since gcc-3.3 is no longer supported for kernel builds.

I did around 20 different $arch builds with no problems, but we'll just
have to see if this causes problems for anyone else out there.

Link: http://lkml.kernel.org/r/ec5dcf72-7c3e-3513-af0c-4003ed598854@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/panic.c: taint: fix debugfs_simple_attr.cocci warnings

Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for
debugfs files.

Semantic patch information:
Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file()
imposes some significant overhead as compared to
DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe().

Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci

The _unsafe() part suggests that some of them "safeness
responsibilities" are now panic.c responsibilities.  The patch is OK
since panic's clear_warn_once_fops struct file_operations is safe
against removal, so we don't have to use otherwise necessary
debugfs_file_get()/debugfs_file_put().

[sergey.senozhatsky.work@gmail.com: changelog addition]
Link: http://lkml.kernel.org/r/1545990861-158097-1-git-send-email-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel.h: unconditionally include asm/div64.h for do_div()

Include asm/div64.h for do_div() usage in DIV_ROUND_DOWN_ULL() and
DIV_ROUND_CLOSEST_ULL().  Remove the old CONFIG_LBDAF=y conditional
include.

Link: http://lkml.kernel.org/r/20181228153430.23763-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'x86-uv-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 UV updates from Ingo Molnar:
 "Three UV related cleanups"

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/UV: Use efi_enabled() instead of test_bit()
  x86/platform/UV: Remove uv_bios_call_reentrant()
  x86/platform/UV: Remove unnecessary #ifdef CONFIG_EFI

Merge branch 'x86-platform-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 platform update from Ingo Molnar:
 "A defconfig update"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/defconfig: Enable EFI stub, mixed mode and BGRT

Merge branch 'x86-mm-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 mm cleanup from Ingo Molnar:
 "A single GUP cleanup"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mm/gup: Remove the 'write' parameter from gup_fast_permitted()

Merge branch 'x86-kdump-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 kdump update from Ingo Molnar:
 "Add the AMD SME mask to the vmcoreinfo, and also document our
  vmcoreinfo fields"

* 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kdump: Document kernel data exported in the vmcoreinfo note
  x86/kdump: Export the SME mask to vmcoreinfo

Merge branch 'x86-fpu-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fpu updates from Ingo Molnar:
 "Three changes:

   - preparatory patch for AVX state tracking that computing-cluster
     folks would like to use for user-space batching - but we are not
     happy about the related ABI yet so this is only the kernel tracking
     side

   - a cleanup for CR0 handling in do_device_not_available()

   - plus we removed a workaround for an ancient binutils version"

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Track AVX-512 usage of tasks
  x86/fpu: Get rid of CONFIG_AS_FXSAVEQ
  x86/traps: Have read_cr0() only once in the #NM handler

Merge branch 'x86-cleanups-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 cleanups from Ingo Molnar:
 "Various cleanups and simplifications, none of them really stands out,
  they are all over the place"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/uaccess: Remove unused __addr_ok() macro
  x86/smpboot: Remove unused phys_id variable
  x86/mm/dump_pagetables: Remove the unused prev_pud variable
  x86/fpu: Move init_xstate_size() to __init section
  x86/cpu_entry_area: Move percpu_setup_debug_store() to __init section
  x86/mtrr: Remove unused variable
  x86/boot/compressed/64: Explain paging_prepare()'s return value
  x86/resctrl: Remove duplicate MSR_MISC_FEATURE_CONTROL definition
  x86/asm/suspend: Drop ENTRY from local data
  x86/hw_breakpoints, kprobes: Remove kprobes ifdeffery
  x86/boot: Save several bytes in decompressor
  x86/trap: Remove useless declaration
  x86/mm/tlb: Remove unused cpu variable
  x86/events: Mark expected switch-case fall-throughs
  x86/asm-prototypes: Remove duplicate include <asm/page.h>
  x86/kernel: Mark expected switch-case fall-throughs
  x86/insn-eval: Mark expected switch-case fall-through
  x86/platform/UV: Replace kmalloc() and memset() with k[cz]alloc() calls
  x86/e820: Replace kmalloc() + memcpy() with kmemdup()

Merge branch 'x86-build-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 build updates from Ingo Molnar:
 "Misc cleanups and a retpoline code generation optimization"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, retpolines: Raise limit for generating indirect calls from switch-case
  x86/build: Use the single-argument OUTPUT_FORMAT() linker script command
  x86/build: Specify elf_i386 linker emulation explicitly for i386 objects
  x86/build: Mark per-CPU symbols as absolute explicitly for LLD

Merge branch 'x86-boot-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 boot updates from Ingo Molnar:
 "Most of the changes center around the difficult problem of KASLR
  pinning down hot-removable memory regions. At the very early stage
  KASRL is making irreversible kernel address layout decisions we don't
  have full knowledge about the memory maps yet.

  So the changes from Chao Fan add this (parsing the RSDP table early),
  together with fixes from Borislav Petkov"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot/compressed/64: Do not read legacy ROM on EFI system
  x86/boot: Correct RSDP parsing with 32-bit EFI
  x86/kexec: Fill in acpi_rsdp_addr from the first kernel
  x86/boot: Fix randconfig build error due to MEMORY_HOTREMOVE
  x86/boot: Fix cmdline_find_option() prototype visibility
  x86/boot/KASLR: Limit KASLR to extract the kernel in immovable memory only
  x86/boot: Parse SRAT table and count immovable memory regions
  x86/boot: Early parse RSDP and save it in boot_params
  x86/boot: Search for RSDP in memory
  x86/boot: Search for RSDP in the EFI tables
  x86/boot: Add "acpi_rsdp=" early parsing
  x86/boot: Copy kstrtoull() to boot/string.c
  x86/boot: Build the command line parsing code unconditionally