git.openwrt.org Git - openwrt/staging/blogic.git/log

kasan, slab: fix conflicts with CONFIG_HARDENED_USERCOPY

Similarly to commit 96fedce27e13 ("kasan: make tag based mode work with
CONFIG_HARDENED_USERCOPY"), we need to reset pointer tags in
__check_heap_object() in mm/slab.c before doing any pointer math.

Link: http://lkml.kernel.org/r/9a5c0f958db10e69df5ff9f2b997866b56b7effc.1550602886.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Qian Cai <cai@lca.pw>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgeniy Stepanov <eugenis@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: prevent tracing of tags.c

Similarly to commit 0d0c8de8788b ("kasan: mark file common so ftrace
doesn't trace it") add the -pg flag to mm/kasan/tags.c to prevent
conflicts with tracing.

Link: http://lkml.kernel.org/r/9c4c3ce5ccfb894c7fe66d91de7c1da2787b4da4.1550602886.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Qian Cai <cai@lca.pw>
Tested-by: Qian Cai <cai@lca.pw>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Evgeniy Stepanov <eugenis@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: fix random seed generation for tag-based mode

There are two issues with assigning random percpu seeds right now:

1. We use for_each_possible_cpu() to iterate over cpus, but cpumask is
   not set up yet at the moment of kasan_init(), and thus we only set
   the seed for cpu #0.

2. A call to get_random_u32() always returns the same number and produces
   a message in dmesg, since the random subsystem is not yet initialized.

Fix 1 by calling kasan_init_tags() after cpumask is set up.

Fix 2 by using get_cycles() instead of get_random_u32(). This gives us
lower quality random numbers, but it's good enough, as KASAN is meant to
be used as a debugging tool and not a mitigation.

Link: http://lkml.kernel.org/r/1f815cc914b61f3516ed4cc9bfd9eeca9bd5d9de.1550677973.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tmpfs: fix link accounting when a tmpfile is linked in

tmpfs has a peculiarity of accounting hard links as if they were
separate inodes: so that when the number of inodes is limited, as it is
by default, a user cannot soak up an unlimited amount of unreclaimable
dcache memory just by repeatedly linking a file.

But when v3.11 added O_TMPFILE, and the ability to use linkat() on the
fd, we missed accommodating this new case in tmpfs: "df -i" shows that
an extra "inode" remains accounted after the file is unlinked and the fd
closed and the actual inode evicted. If a user repeatedly links
tmpfiles into a tmpfs, the limit will be hit (ENOSPC) even after they
are deleted.

Just skip the extra reservation from shmem_link() in this case: there's
a sense in which this first link of a tmpfile is then cheaper than a
hard link of another file, but the accounting works out, and there's
still good limiting, so no need to do anything more complicated.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1902182134370.7035@eggly.anvils
Fixes: f4e0c30c191 ("allow the temp files created by open() to be linked to")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Matej Kupljen <matej.kupljen@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

psi: avoid divide-by-zero crash inside virtual machines

We've been seeing hard-to-trigger psi crashes when running inside VM
instances:

    divide error: 0000 [#1] SMP PTI
    Modules linked in: [...]
    CPU: 0 PID: 212 Comm: kworker/0:2 Not tainted 4.16.18-119_fbk9_3817_gfe944c98d695 #119
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
    Workqueue: events psi_clock
    RIP: 0010:psi_update_stats+0x270/0x490
    RSP: 0018:ffffc90001117e10 EFLAGS: 00010246
    RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8800a35a13f8
    RDX: 0000000000000000 RSI: ffff8800a35a1340 RDI: 0000000000000000
    RBP: 0000000000000658 R08: ffff8800a35a1470 R09: 0000000000000000
    R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
    R13: 0000000000000000 R14: 0000000000000000 R15: 00000000000f8502
    FS:  0000000000000000(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007fbe370fa000 CR3: 00000000b1e3a000 CR4: 00000000000006f0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
     psi_clock+0x12/0x50
     process_one_work+0x1e0/0x390
     worker_thread+0x2b/0x3c0
     ? rescuer_thread+0x330/0x330
     kthread+0x113/0x130
     ? kthread_create_worker_on_cpu+0x40/0x40
     ? SyS_exit_group+0x10/0x10
     ret_from_fork+0x35/0x40
    Code: 48 0f 47 c7 48 01 c2 45 85 e4 48 89 16 0f 85 e6 00 00 00 4c 8b 49 10 4c 8b 51 08 49 69 d9 f2 07 00 00 48 6b c0 64 4c 8b 29 31 d2 <48> f7 f7 49 69 d5 8d 06 00 00 48 89 c5 4c 69 f0 00 98 0b 00 48

The Code-line points to `period` being 0 inside update_stats(), and we
divide by that when calculating that period's pressure percentage.

The elapsed period should never be 0.  The reason this can happen is due
to an off-by-one in the idle time / missing period calculation combined
with a coarse sched_clock() in the virtual machine.

The target time for aggregation is advanced into the future on a fixed
grid to prevent clock drift.  So when an aggregation runs after some idle
period, we can not just set it to "now + psi_period", but have to
calculate the downtime and advance the target time relative to itself.

However, if the aggregator was disabled exactly one psi_period (ns), we
drop one idle period in the calculation due to a > when we should do >=.
In that case, next_update will be advanced from 'now - psi_period' to
'now' when it should be moved to 'now + psi_period'.  The run finishes
with last_update == next_update == sched_clock().

With hardware clocks, this exact nanosecond match isn't likely in the
first place; but if it does happen, the clock will still have moved on and
the period non-zero by the time the worker runs.  A pointlessly short
period, but besides the extra work, no harm no foul.  However, a slow
sched_clock() like we have on VMs might not have advanced either by the
time the worker runs again.  And when we calculate the elapsed period, the
result, our pressure divisor, will be 0.  Ouch.

Fix this by correctly handling the situation when the elapsed time between
aggregation runs is precisely two periods, and advance the expiration
timestamp correctly to period into the future.

Link: http://lkml.kernel.org/r/20190214193157.15788-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Łukasz Siudut <lsiudut@fb.com
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: handle lru_add_drain_all for UP properly

Since for_each_cpu(cpu, mask) added by commit 2d3854a37e8b767a
("cpumask: introduce new API, without changing anything") did not
evaluate the mask argument if NR_CPUS == 1 due to CONFIG_SMP=n,
lru_add_drain_all() is hitting WARN_ON() at __flush_work() added by
commit 4d43d395fed12463 ("workqueue: Try to catch flush_work() without
INIT_WORK().") by unconditionally calling flush_work() [1].

Workaround this issue by using CONFIG_SMP=n specific lru_add_drain_all
implementation. There is no real need to defer the implementation to
the workqueue as the draining is going to happen on the local cpu. So
alias lru_add_drain_all to lru_add_drain which does all the necessary
work.

[akpm@linux-foundation.org: fix various build warnings]
[1] https://lkml.kernel.org/r/18a30387-6aa5-6123-e67c-57579ecc3f38@roeck-us.net
Link: http://lkml.kernel.org/r/20190213124334.GH4525@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Debugged-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, page_alloc: fix a division by zero error when boosting watermarks v2

Yury Norov reported that an arm64 KVM instance could not boot since
after v5.0-rc1 and could addressed by reverting the patches

  1c30844d2dfe272d58c ("mm: reclaim small amounts of memory when an external
  73444bc4d8f92e46a20 ("mm, page_alloc: do not wake kswapd with zone lock held")

The problem is that a division by zero error is possible if boosting
occurs very early in boot if the system has very little memory.  This
patch avoids the division by zero error.

Link: http://lkml.kernel.org/r/20190213143012.GT9565@techsingularity.net
Fixes: 1c30844d2dfe ("mm: reclaim small amounts of memory when an external fragmentation event occurs")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/debug.c: fix __dump_page() for poisoned pages

Evaluating page_mapping() on a poisoned page ends up dereferencing junk
and making PF_POISONED_CHECK() considerably crashier than intended:

    Unable to handle kernel NULL pointer dereference at virtual address 0000000000000006
    Mem abort info:
      ESR = 0x96000005
      Exception class = DABT (current EL), IL = 32 bits
      SET = 0, FnV = 0
      EA = 0, S1PTW = 0
    Data abort info:
      ISV = 0, ISS = 0x00000005
      CM = 0, WnR = 0
    user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c2f6ac38
    [0000000000000006] pgd=0000000000000000, pud=0000000000000000
    Internal error: Oops: 96000005 [#1] PREEMPT SMP
    Modules linked in:
    CPU: 2 PID: 491 Comm: bash Not tainted 5.0.0-rc1+ #1
    Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Dec 17 2018
    pstate: 00000005 (nzcv daif -PAN -UAO)
    pc : page_mapping+0x18/0x118
    lr : __dump_page+0x1c/0x398
    Process bash (pid: 491, stack limit = 0x000000004ebd4ecd)
    Call trace:
     page_mapping+0x18/0x118
     __dump_page+0x1c/0x398
     dump_page+0xc/0x18
     remove_store+0xbc/0x120
     dev_attr_store+0x18/0x28
     sysfs_kf_write+0x40/0x50
     kernfs_fop_write+0x130/0x1d8
     __vfs_write+0x30/0x180
     vfs_write+0xb4/0x1a0
     ksys_write+0x60/0xd0
     __arm64_sys_write+0x18/0x20
     el0_svc_common+0x94/0xf8
     el0_svc_handler+0x68/0x70
     el0_svc+0x8/0xc
    Code: f9400401 d1000422 f240003f 9a801040 (f9400402)
    ---[ end trace cdb5eb5bf435cecb ]---

Fix that by not inspecting the mapping until we've determined that it's
likely to be valid.  Now the above condition still ends up stopping the
kernel, but in the correct manner:

    page:ffffffbf20000000 is uninitialized and poisoned
    raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
    raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
    page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
    ------------[ cut here ]------------
    kernel BUG at ./include/linux/mm.h:1006!
    Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
    Modules linked in:
    CPU: 1 PID: 483 Comm: bash Not tainted 5.0.0-rc1+ #3
    Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Dec 17 2018
    pstate: 40000005 (nZcv daif -PAN -UAO)
    pc : remove_store+0xbc/0x120
    lr : remove_store+0xbc/0x120
    ...

Link: http://lkml.kernel.org/r/03b53ee9d7e76cda4b9b5e1e31eea080db033396.1550071778.git.robin.murphy@arm.com
Fixes: 1c6fb1d89e73 ("mm: print more information about mapping in __dump_page")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc, oom: do not report alien mms when setting oom_score_adj

Tetsuo has reported that creating a thousands of processes sharing MM
without SIGHAND (aka alien threads) and setting
/proc/<pid>/oom_score_adj will swamp the kernel log and takes ages [1]
to finish. This is especially worrisome that all that printing is done
under RCU lock and this can potentially trigger RCU stall or softlockup
detector.

The primary reason for the printk was to catch potential users who might
depend on the behavior prior to 44a70adec910 ("mm, oom_adj: make sure
processes sharing mm have same view of oom_score_adj") but after more
than 2 years without a single report I guess it is safe to simply remove
the printk altogether.

The next step should be moving oom_score_adj over to the mm struct and
remove all the tasks crawling as suggested by [2]

[1] http://lkml.kernel.org/r/97fce864-6f75-bca5-14bc-12c9f890e740@i-love.sakura.ne.jp
[2] http://lkml.kernel.org/r/20190117155159.GA4087@dhcp22.suse.cz

Link: http://lkml.kernel.org/r/20190212102129.26288-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Yong-Taek Lee <ytk.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: fix SLAB_CONSISTENCY_CHECKS + KASAN_SW_TAGS

Enabling SLUB_DEBUG's SLAB_CONSISTENCY_CHECKS with KASAN_SW_TAGS
triggers endless false positives during boot below due to
check_valid_pointer() checks tagged pointers which have no addresses
that is valid within slab pages:

  BUG radix_tree_node (Tainted: G    B            ): Freelist Pointer check fails
  -----------------------------------------------------------------------------

  INFO: Slab objects=69 used=69 fp=0x          (null) flags=0x7ffffffc000200
  INFO: Object @offset=15060037153926966016 fp=0x

  Redzone: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 18 6b 06 00 08 80 ff d0  .........k......
  Object : 18 6b 06 00 08 80 ff d0 00 00 00 00 00 00 00 00  .k..............
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Object : 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  Redzone: bb bb bb bb bb bb bb bb                          ........
  Padding: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
  CPU: 0 PID: 0 Comm: swapper/0 Tainted: G    B             5.0.0-rc5+ #18
  Call trace:
    dump_backtrace+0x0/0x450
    show_stack+0x20/0x2c
    __dump_stack+0x20/0x28
    dump_stack+0xa0/0xfc
    print_trailer+0x1bc/0x1d0
    object_err+0x40/0x50
    alloc_debug_processing+0xf0/0x19c
    ___slab_alloc+0x554/0x704
    kmem_cache_alloc+0x2f8/0x440
    radix_tree_node_alloc+0x90/0x2fc
    idr_get_free+0x1e8/0x6d0
    idr_alloc_u32+0x11c/0x2a4
    idr_alloc+0x74/0xe0
    worker_pool_assign_id+0x5c/0xbc
    workqueue_init_early+0x49c/0xd50
    start_kernel+0x52c/0xac4
  FIX radix_tree_node: Marking all objects used

Link: http://lkml.kernel.org/r/20190209044128.3290-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, slub: fix more conflicts with CONFIG_SLAB_FREELIST_HARDENED

When CONFIG_KASAN_SW_TAGS is enabled, ptr_addr might be tagged.  Normally,
this doesn't cause any issues, as both set_freepointer() and
get_freepointer() are called with a pointer with the same tag.  However,
there are some issues with CONFIG_SLUB_DEBUG code.  For example, when
__free_slub() iterates over objects in a cache, it passes untagged
pointers to check_object().  check_object() in turns calls
get_freepointer() with an untagged pointer, which causes the freepointer
to be restored incorrectly.

Add kasan_reset_tag to freelist_ptr(). Also add a detailed comment.

Link: http://lkml.kernel.org/r/bf858f26ef32eb7bd24c665755b3aee4bc58d0e4.1550103861.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Qian Cai <cai@lca.pw>
Tested-by: Qian Cai <cai@lca.pw>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, slub: fix conflicts with CONFIG_SLAB_FREELIST_HARDENED

CONFIG_SLAB_FREELIST_HARDENED hashes freelist pointer with the address of
the object where the pointer gets stored. With tag based KASAN we don't
account for that when building freelist, as we call set_freepointer() with
the first argument untagged. This patch changes the code to properly
propagate tags throughout the loop.

Link: http://lkml.kernel.org/r/3df171559c52201376f246bf7ce3184fe21c1dc7.1549921721.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Qian Cai <cai@lca.pw>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Evgeniy Stepanov <eugenis@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, slub: move kasan_poison_slab hook before page_address

With tag based KASAN page_address() looks at the page flags to see whether
the resulting pointer needs to have a tag set.  Since we don't want to set
a tag when page_address() is called on SLAB pages, we call
page_kasan_tag_reset() in kasan_poison_slab().  However in allocate_slab()
page_address() is called before kasan_poison_slab().  Fix it by changing
the order.

[andreyknvl@google.com: fix compilation error when CONFIG_SLUB_DEBUG=n]
Link: http://lkml.kernel.org/r/ac27cc0bbaeb414ed77bcd6671a877cf3546d56e.1550066133.git.andreyknvl@google.com
Link: http://lkml.kernel.org/r/cd895d627465a3f1c712647072d17f10883be2a1.1549921721.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgeniy Stepanov <eugenis@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmemleak: account for tagged pointers when calculating pointer range

kmemleak keeps two global variables, min_addr and max_addr, which store
the range of valid (encountered by kmemleak) pointer values, which it
later uses to speed up pointer lookup when scanning blocks.

With tagged pointers this range will get bigger than it needs to be. This
patch makes kmemleak untag pointers before saving them to min_addr and
max_addr and when performing a lookup.

Link: http://lkml.kernel.org/r/16e887d442986ab87fe87a755815ad92fa431a5f.1550066133.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Qian Cai <cai@lca.pw>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgeniy Stepanov <eugenis@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, kmemleak: pass tagged pointers to kmemleak

Right now we call kmemleak hooks before assigning tags to pointers in
KASAN hooks. As a result, when an objects gets allocated, kmemleak sees a
differently tagged pointer, compared to the one it sees when the object
gets freed. Fix it by calling KASAN hooks before kmemleak's ones.

Link: http://lkml.kernel.org/r/cd825aa4897b0fc37d3316838993881daccbe9f5.1549921721.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Qian Cai <cai@lca.pw>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgeniy Stepanov <eugenis@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: fix assigning tags twice

When an object is kmalloc()'ed, two hooks are called: kasan_slab_alloc()
and kasan_kmalloc(). Right now we assign a tag twice, once in each of the
hooks. Fix it by assigning a tag only in the former hook.

Link: http://lkml.kernel.org/r/ce8c6431da735aa7ec051fd6497153df690eb021.1549921721.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgeniy Stepanov <eugenis@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

numa: change get_mempolicy() to use nr_node_ids instead of MAX_NUMNODES

The system call, get_mempolicy() [1], passes an unsigned long *nodemask
pointer and an unsigned long maxnode argument which specifies the length
of the user's nodemask array in bits (which is rounded up). The manual
page says that if the maxnode value is too small, get_mempolicy will
return EINVAL but there is no system call to return this minimum value.
To determine this value, some programs search /proc/<pid>/status for a
line starting with "Mems_allowed:" and use the number of digits in the
mask to determine the minimum value. A recent change to the way this line
is formatted [2] causes these programs to compute a value less than
MAX_NUMNODES so get_mempolicy() returns EINVAL.

Change get_mempolicy(), the older compat version of get_mempolicy(), and
the copy_nodes_to_user() function to use nr_node_ids instead of
MAX_NUMNODES, thus preserving the defacto method of computing the minimum
size for the nodemask array and the maxnode argument.

[1] http://man7.org/linux/man-pages/man2/get_mempolicy.2.html
[2] https://lore.kernel.org/lkml/1545405631-6808-1-git-send-email-longman@redhat.com

Link: http://lkml.kernel.org/r/20190211180245.22295-1-rcampbell@nvidia.com
Fixes: 4fb8e5b89bcbbbb ("include/linux/nodemask.h: use nr_node_ids (not MAX_NUMNODES) in __nodemask_pr_numnodes()")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Waiman Long <longman@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

revert "initramfs: cleanup incomplete rootfs"

Revert ff1522bb7d9845 ("initramfs: cleanup incomplete rootfs").

Andy reports

: This breaks my setup where I have U-boot provided more size of initramfs
: than needed. This allows a bit of flexibility to increase or decrease
: initramfs compressed image without taking care of bootloader. The proper
: solution is to do this if we sure that we didn't get enough memory,
: otherwise I can't consider the error fatal to clean up rootfs.

Fixes: ff1522bb7d9845 ("initramfs: cleanup incomplete rootfs")
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: David Engraf <david.engraf@sysgo.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'sound-5.0' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"Here are a few last-minute fixes for 5.0.

  The most significant one is the OF-node refcount fix for ASoC
  simple-card, which could be triggered on many boards. Another fix for
  ASoC core is for the error handling in topology, while others are
  device-specific fixes for Samsung and HD-audio"

* tag 'sound-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: simple-card: fixup refcount_t underflow
  ASoC: topology: free created components in tplg load error
  ALSA: hda/realtek: Disable PC beep in passthrough on alc285
  ALSA: hda/realtek - Headset microphone and internal speaker support for System76 oryp5
  ASoC: samsung: i2s: Fix prescaler setting for the secondary DAI

Merge tag 'pinctrl-v5.0-3' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
"Some final pin control fixes (I hope) to round off the v5.0 pin
  control development cycle.

  Only driver fixes, one for stable:

   - Meson8B fixup for the sdc pins

   - Fix SDC tile position for Qualcomm QCS404"

* tag 'pinctrl-v5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: meson: meson8b: fix the sdxc_a data 1..3 pins
  pinctrl: qcom: qcs404: Correct SDC tile

Merge tag 'gpio-v5.0-4' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
"Two GPIO fixes for the v5.0 series:

   - Per-instance irqchip on the MT7621

   - Avoid direction setting using pin control on MMP2"

* tag 'gpio-v5.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: pxa: avoid attempting to set pin direction via pinctrl on MMP2
  gpio: MT7621: use a per instance irq_chip structure

Merge tag 'mtd/fixes-for-5.0-rc8' of git://git.infradead.org/linux-mtd

Pull MTD fixes from Boris Brezillon:

- Don't add a digit to MTD-backed nvmem device names

- Make sure powernv flash names are unique

* tag 'mtd/fixes-for-5.0-rc8' of git://git.infradead.org/linux-mtd:
mtd: powernv_flash: Fix device registration error
mtd: Use mtd->name when registering nvmem device

Merge branch 'fixes-v5.1-rc6' of git://git./linux/kernel/git/jmorris/linux-security

Pull keys fixes from James Morris:

- Handle quotas better, allowing full quota to be reached.

- Fix the creation of shortcuts in the assoc_array internal
   representation when the index key needs to be an exact multiple of
   the machine word size.

- Fix a dependency loop between the request_key contruction record and
   the request_key authentication key. The construction record isn't
   really necessary and can be dispensed with.

- Set the timestamp on a new key rather than leaving it as 0. This
   would ordinarily be fine - provided the system clock is never set to
   a time before 1970

* 'fixes-v5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  keys: Timestamp new keys
  keys: Fix dependency loop between construction record and auth key
  assoc_array: Fix shortcut creation
  KEYS: allow reaching the keys quotas exactly

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Fix suspend and resume in mt76x0u USB driver, from Stanislaw
    Gruszka.

2) Missing memory barriers in xsk, from Magnus Karlsson.

3) rhashtable fixes in mac80211 from Herbert Xu.

4) 32-bit MIPS eBPF JIT fixes from Paul Burton.

5) Fix for_each_netdev_feature() on big endian, from Hauke Mehrtens.

6) GSO validation fixes from Willem de Bruijn.

7) Endianness fix for dwmac4 timestamp handling, from Alexandre Torgue.

8) More strict checks in tcp_v4_err(), from Eric Dumazet.

9) af_alg_release should NULL out the sk after the sock_put(), from Mao
    Wenan.

10) Missing unlock in mac80211 mesh error path, from Wei Yongjun.

11) Missing device put in hns driver, from Salil Mehta.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
  sky2: Increase D3 delay again
  vhost: correctly check the return value of translate_desc() in log_used()
  net: netcp: Fix ethss driver probe issue
  net: hns: Fixes the missing put_device in positive leg for roce reset
  net: stmmac: Fix a race in EEE enable callback
  qed: Fix iWARP syn packet mac address validation.
  qed: Fix iWARP buffer size provided for syn packet processing.
  r8152: Add support for MAC address pass through on RTL8153-BD
  mac80211: mesh: fix missing unlock on error in table_path_del()
  net/mlx4_en: fix spelling mistake: "quiting" -> "quitting"
  net: crypto set sk to NULL when af_alg_release.
  net: Do not allocate page fragments that are not skb aligned
  mm: Use fixed constant in page_frag_alloc instead of size + 1
  tcp: tcp_v4_err() should be more careful
  tcp: clear icsk_backoff in tcp_write_queue_purge()
  net: mv643xx_eth: disable clk on error path in mv643xx_eth_shared_probe()
  qmi_wwan: apply SET_DTR quirk to Sierra WP7607
  net: stmmac: handle endianness in dwmac4_get_timestamp
  doc: Mention MSG_ZEROCOPY implementation for UDP
  mlxsw: __mlxsw_sp_port_headroom_set(): Fix a use of local variable
  ...

sky2: Increase D3 delay again

Another platform requires even longer delay to make the device work
correctly after S3.

So increase the delay to 300ms.

BugLink: https://bugs.launchpad.net/bugs/1798921
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost: correctly check the return value of translate_desc() in log_used()

When fail, translate_desc() returns negative value, otherwise the
number of iovs. So we should fail when the return value is negative
instead of a blindly check against zero.

Detected by CoverityScan, CID# 1442593: Control flow issues (DEADCODE)

Fixes: cc5e71075947 ("vhost: log dirty page correctly")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'asoc-fix-v5.0-rc6' of git://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.0

A few small fixes, a driver fix for Samsung, a fix for refcounting of
of_nodes in the simple-card driver that triggered on a lot of systems
and a fix for topology error handling.

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes for net:

1) Follow up patch to fix a compilation warning in a recent IPVS fix:
098e13f5b21d ("ipvs: fix dependency on nf_defrag_ipv6").

2) Bogus ENOENT error on flush after rule deletion in the same batch,
reported by Phil Sutter.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: netcp: Fix ethss driver probe issue

Recent commit below has introduced a bug in netcp driver that causes
the ethss driver probe failure and thus break the networking function
on K2 SoCs such as K2HK, K2L, K2E etc. This patch fixes the issue to
restore networking on the above SoCs.

Fixes: 21c328dcecfc ("net: ethernet: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns: Fixes the missing put_device in positive leg for roce reset

This patch fixes the missing device reference release-after-use in
the positive leg of the roce reset API of the HNS DSAF.

Fixes: c969c6e7ab8c ("net: hns: Fix object reference leaks in hns_dsaf_roce_reset()")
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2019-02-18' of git://git./linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 5.0

Hopefully the last set of fixes for 5.0, only fix this time.

mt76

* fix regression with resume on mt76x0u USB devices
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Fix a race in EEE enable callback

We are saving the status of EEE even before we try to enable it. This
leads to a race with XMIT function that tries to arm EEE timer before we
set it up.

Fix this by only saving the EEE parameters after all operations are
performed with success.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Fixes: d765955d2ae0 ("stmmac: add the Energy Efficient Ethernet support")
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'qed-iWARP'

Michal Kalderon says:

====================
qed: iWARP - fix some syn related issues.

This series fixes two bugs related to iWARP syn processing flow.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Fix iWARP syn packet mac address validation.

The ll2 forwards all syn packets to the driver without validating the mac
address. Add validation check in the driver's iWARP listener flow and drop
the packet if it isn't intended for the device.

Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Fix iWARP buffer size provided for syn packet processing.

The assumption that the maximum size of a syn packet is 128 bytes
is wrong. Tunneling headers were not accounted for.
Allocate buffers large enough for mtu.

Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

exec: load_script: Do not exec truncated interpreter path

Commit 8099b047ecc4 ("exec: load_script: don't blindly truncate
shebang string") was trying to protect against a confused exec of a
truncated interpreter path. However, it was overeager and also refused
to truncate arguments as well, which broke userspace, and it was
reverted. This attempts the protection again, but allows arguments to
remain truncated. In an effort to improve readability, helper functions
and comments have been added.

Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Samuel Dionne-Riel <samuel@dionne-riel.com>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Cc: Graham Christensen <graham@grahamc.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

r8152: Add support for MAC address pass through on RTL8153-BD

RTL8153-BD is used in Dell DA300 type-C dongle.
It should be added to the whitelist of devices to activate MAC address
pass through.

Per confirming with Realtek all devices containing RTL8153-BD should
activate MAC pass through and there won't use pass through bit on efuse
like in RTL8153-AD.

Signed-off-by: David Chen <david.chen7@dell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac80211: mesh: fix missing unlock on error in table_path_del()

spin_lock_bh() is used in table_path_del() but rcu_read_unlock()
is used for unlocking. Fix it by using spin_unlock_bh() instead
of rcu_read_unlock() in the error handling case.

Fixes: b4c3fbe63601 ("mac80211: Use linked list instead of rhashtable walk for mesh tables")
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx4_en: fix spelling mistake: "quiting" -> "quitting"

There is a spelling mistake in a en_err error message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: crypto set sk to NULL when af_alg_release.

KASAN has found use-after-free in sockfs_setattr.
The existed commit 6d8c50dcb029 ("socket: close race condition between sock_close()
and sockfs_setattr()") is to fix this simillar issue, but it seems to ignore
that crypto module forgets to set the sk to NULL after af_alg_release.

KASAN report details as below:
BUG: KASAN: use-after-free in sockfs_setattr+0x120/0x150
Write of size 4 at addr ffff88837b956128 by task syz-executor0/4186

CPU: 2 PID: 4186 Comm: syz-executor0 Not tainted xxx + #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.10.2-1ubuntu1 04/01/2014
Call Trace:
dump_stack+0xca/0x13e
print_address_description+0x79/0x330
? vprintk_func+0x5e/0xf0
kasan_report+0x18a/0x2e0
? sockfs_setattr+0x120/0x150
sockfs_setattr+0x120/0x150
? sock_register+0x2d0/0x2d0
notify_change+0x90c/0xd40
? chown_common+0x2ef/0x510
chown_common+0x2ef/0x510
? chmod_common+0x3b0/0x3b0
? __lock_is_held+0xbc/0x160
? __sb_start_write+0x13d/0x2b0
? __mnt_want_write+0x19a/0x250
do_fchownat+0x15c/0x190
? __ia32_sys_chmod+0x80/0x80
? trace_hardirqs_on_thunk+0x1a/0x1c
__x64_sys_fchownat+0xbf/0x160
? lockdep_hardirqs_on+0x39a/0x5e0
do_syscall_64+0xc8/0x580
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462589
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89
f7 48 89 d6 48 89
ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3
48 c7 c1 bc ff ff
ff f7 d8 64 89 01 48
RSP: 002b:00007fb4b2c83c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000104
RAX: ffffffffffffffda RBX: 000000000072bfa0 RCX: 0000000000462589
RDX: 0000000000000000 RSI: 00000000200000c0 RDI: 0000000000000007
RBP: 0000000000000005 R08: 0000000000001000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb4b2c846bc
R13: 00000000004bc733 R14: 00000000006f5138 R15: 00000000ffffffff

Allocated by task 4185:
kasan_kmalloc+0xa0/0xd0
__kmalloc+0x14a/0x350
sk_prot_alloc+0xf6/0x290
sk_alloc+0x3d/0xc00
af_alg_accept+0x9e/0x670
hash_accept+0x4a3/0x650
__sys_accept4+0x306/0x5c0
__x64_sys_accept4+0x98/0x100
do_syscall_64+0xc8/0x580
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 4184:
__kasan_slab_free+0x12e/0x180
kfree+0xeb/0x2f0
__sk_destruct+0x4e6/0x6a0
sk_destruct+0x48/0x70
__sk_free+0xa9/0x270
sk_free+0x2a/0x30
af_alg_release+0x5c/0x70
__sock_release+0xd3/0x280
sock_close+0x1a/0x20
__fput+0x27f/0x7f0
task_work_run+0x136/0x1b0
exit_to_usermode_loop+0x1a7/0x1d0
do_syscall_64+0x461/0x580
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Syzkaller reproducer:
r0 = perf_event_open(&(0x7f0000000000)={0x0, 0x70, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, @perf_config_ext}, 0x0, 0x0,
0xffffffffffffffff, 0x0)
r1 = socket$alg(0x26, 0x5, 0x0)
getrusage(0x0, 0x0)
bind(r1, &(0x7f00000001c0)=@alg={0x26, 'hash\x00', 0x0, 0x0,
'sha256-ssse3\x00'}, 0x80)
r2 = accept(r1, 0x0, 0x0)
r3 = accept4$unix(r2, 0x0, 0x0, 0x0)
r4 = dup3(r3, r0, 0x0)
fchownat(r4, &(0x7f00000000c0)='\x00', 0x0, 0x0, 0x1000)

Fixes: 6d8c50dcb029 ("socket: close race condition between sock_close() and sockfs_setattr()")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ASoC: simple-card: fixup refcount_t underflow

commit da215354eb55c ("ASoC: simple-card: merge simple-scu-card")
merged simple-card and simple-scu-card. Then it had refcount
underflow bug. This patch fixup it.
We will get below error without this patch.

OF: ERROR: Bad of_node_put() on /sound
CPU: 3 PID: 237 Comm: kworker/3:1 Not tainted 5.0.0-rc6+ #1514
Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT)
Workqueue: events deferred_probe_work_func
Call trace:
dump_backtrace+0x0/0x150
show_stack+0x24/0x30
dump_stack+0xb0/0xec
of_node_release+0xd0/0xd8
kobject_put+0x74/0xe8
of_node_put+0x24/0x30
__of_get_next_child+0x50/0x70
of_get_next_child+0x40/0x68
asoc_simple_card_probe+0x604/0x730
platform_drv_probe+0x58/0xa8
...
Reported-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: topology: free created components in tplg load error

Topology resources are no longer needed if any element failed to load.

Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'mailbox-fixes-v5.0-rc7' of git://git.linaro.org/landing-teams/working/fujitsu/integration

Pull mailbox fixes from Jassi Brar:

- API: Fix build breakge by exporting the function mbox_flush

- BRCM: Fix FlexRM ring flush timeout issue

* tag 'mailbox-fixes-v5.0-rc7' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush timeout issue
mailbox: Export mbox_flush()

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
"A few ARM fixes:

   - Dietmar Eggemann noticed an issue with IRQ migration during CPU
     hotplug stress testing.

   - Mathieu Desnoyers noticed that a previous fix broke optimised
     kprobes.

   - Robin Murphy noticed a case where we were not clearing the dma_ops"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8835/1: dma-mapping: Clear DMA ops on teardown
  ARM: 8834/1: Fix: kprobes: optimized kprobes illegal instruction
  ARM: 8824/1: fix a migrating irq bug when hotplug cpu

Merge tag 'trace-v5.0-rc4-3' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
"Two more tracing fixes

   - Have kprobes not use copy_from_user() to access kernel addresses,
     because kprobes can legitimately poke at bad kernel memory, which
     will fault. Copy from user code should never fault in kernel space.
     Using probe_mem_read() can handle kernel address space faulting.

   - Put back the entries counter in the tracing output that was
     accidentally removed"

* tag 'trace-v5.0-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix number of entries in trace header
  kprobe: Do not use uaccess functions to access kernel memory that can fault

mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush timeout issue

RING_CONTROL reg was not written due to wrong address, hence all
the subsequent ring flush was timing out.

Fixes: a371c10ea4b3 ("mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush sequence")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

mailbox: Export mbox_flush()

The mbox_flush() function can be used by drivers that are built as
modules, so the function needs to be exported.

Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Linux 5.0-rc7

Merge branch 'netdev-page_frag_alloc-fixes'

Alexander Duyck says:

====================
Address recent issues found in netdev page_frag_alloc usage

This patch set addresses a couple of issues that I had pointed out to Jann
Horn in response to a recent patch submission.

The first issue is that I wanted to avoid the need to read/modify/write the
size value in order to generate the value for pagecnt_bias. Instead we can
just use a fixed constant which reduces the need for memory read operations
and the overall number of instructions to update the pagecnt bias values.

The other, and more important issue is, that apparently we were letting tun
access the napi_alloc_cache indirectly through netdev_alloc_frag and as a
result letting it create unaligned accesses via unaligned allocations. In
order to prevent this I have added a call to SKB_DATA_ALIGN for the fragsz
field so that we will keep the offset in the napi_alloc_cache
SMP_CACHE_BYTES aligned.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: Do not allocate page fragments that are not skb aligned

This patch addresses the fact that there are drivers, specifically tun,
that will call into the network page fragment allocators with buffer sizes
that are not cache aligned. Doing this could result in data alignment
and DMA performance issues as these fragment pools are also shared with the
skb allocator and any other devices that will use napi_alloc_frags or
netdev_alloc_frags.

Fixes: ffde7328a36d ("net: Split netdev_alloc_frag into __alloc_page_frag and add __napi_alloc_frag")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mm: Use fixed constant in page_frag_alloc instead of size + 1

This patch replaces the size + 1 value introduced with the recent fix for 1
byte allocs with a constant value.

The idea here is to reduce code overhead as the previous logic would have
to read size into a register, then increment it, and write it back to
whatever field was being used. By using a constant we can avoid those
memory reads and arithmetic operations in favor of just encoding the
maximum value into the operation itself.

Fixes: 2c2ade81741c ("mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs")
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'tcp-fix-possible-crash-in-tcp_v4_err'

Eric Dumazet says:

====================
tcp: fix possible crash in tcp_v4_err()

soukjin bae reported a crash in tcp_v4_err() that we
root caused to a missing initialization.

Second patch adds a sanity check in tcp_v4_err() to avoid
future potential problems. Ignoring an ICMP message
is probably better than crashing a machine.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: tcp_v4_err() should be more careful

ICMP handlers are not very often stressed, we should
make them more resilient to bugs that might surface in
the future.

If there is no packet in retransmit queue, we should
avoid a NULL deref.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: soukjin bae <soukjin.bae@samsung.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: clear icsk_backoff in tcp_write_queue_purge()

soukjin bae reported a crash in tcp_v4_err() handling
ICMP_DEST_UNREACH after tcp_write_queue_head(sk)
returned a NULL pointer.

Current logic should have prevented this :

  if (seq != tp->snd_una  || !icsk->icsk_retransmits ||
      !icsk->icsk_backoff || fastopen)
      break;

Problem is the write queue might have been purged
and icsk_backoff has not been cleared.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: soukjin bae <soukjin.bae@samsung.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mv643xx_eth: disable clk on error path in mv643xx_eth_shared_probe()

If mv643xx_eth_shared_of_probe() fails, mv643xx_eth_shared_probe()
leaves clk enabled.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

qmi_wwan: apply SET_DTR quirk to Sierra WP7607

The 1199:68C0 USB ID is reused by Sierra WP7607 which requires the DTR
quirk to be detected. Apply QMI_QUIRK_SET_DTR unconditionally as
already done for other IDs shared between different devices.

Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: handle endianness in dwmac4_get_timestamp

GMAC IP is little-endian and used on several kind of CPU (big or little
endian). Main callbacks functions of the stmmac drivers take care about
it. It was not the case for dwmac4_get_timestamp function.

Fixes: ba1ffd74df74 ("stmmac: fix PTP support for GMAC4")
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

doc: Mention MSG_ZEROCOPY implementation for UDP

MSG_ZEROCOPY implementation for UDP was merged in v5.0,
6e360f733113 ("Merge branch 'udp-msg_zerocopy'").

Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

pinctrl: meson: meson8b: fix the sdxc_a data 1..3 pins

Fix the mismatch between the "sdxc_d13_1_a" pin group definition from
meson8b_cbus_groups and the entry in sdxc_a_groups ("sdxc_d0_13_1_a").
This makes it possible to use "sdxc_d13_1_a" in device-tree files to
route the MMC data 1..3 pins to GPIOX_1..3.

Fixes: 0fefcb6876d0d6 ("pinctrl: Add support for Meson8b")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

mlxsw: __mlxsw_sp_port_headroom_set(): Fix a use of local variable

The function-local variable "delay" enters the loop interpreted as delay
in bits. However, inside the loop it gets overwritten by the result of
mlxsw_sp_pg_buf_delay_get(), and thus leaves the loop as quantity in
cells. Thus on second and further loop iterations, the headroom for a
given priority is configured with a wrong size.

Fix by introducing a loop-local variable, delay_cells. Rename thres to
thres_cells for consistency.

Fixes: f417f04da589 ("mlxsw: spectrum: Refactor port buffer configuration")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull EFI fixes from Ingo Molnar:
"This tree reverts a GICv3 commit (which was broken) and fixes it in
  another way, by adding a memblock build-time entries quirk for ARM64"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/arm: Revert "Defer persistent reservations until after paging_init()"
  arm64, mm, efi: Account for GICv3 LPI tables in static memblock reserve table

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"Three changes:

   - An UV fix/quirk to pull UV BIOS calls into the efi_runtime_lock
     locking regime. (This done by aliasing __efi_uv_runtime_lock to
     efi_runtime_lock, which should make the quirk nature obvious and
     maintain the general policy that the EFI lock (name...) isn't
     exposed to drivers.)

   - Our version of MAGA: Make a.out Great Again.

   - Add a new Intel model name enumerator to an upstream header to help
     reduce dependencies going forward"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls
  x86/CPU: Add Icelake model number
  x86/a.out: Clear the dump structure initially

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
"Two fixes on the kernel side: fix an over-eager condition that failed
  larger perf ring-buffer sizes, plus fix crashes in the Intel BTS code
  for a corner case, found by fuzzing"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix impossible ring-buffer sizes warning
  perf/x86: Add check_period PMU callback

Merge tag 'powerpc-5.0-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fix from Michael Ellerman:
"Just one fix, for pgd/pud_present() which were broken on big endian
  since v4.20, leading to possible data corruption.

  Thanks to: Aneesh Kumar K.V., Erhard F., Jan Kara"

* tag 'powerpc-5.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Fix possible corruption on big endian due to pgd/pud_present()

Merge tag 'csky-for-linus-5.0-rc6' of git://github.com/c-sky/csky-linux

Pull arch/csky fixes from Guo Ren:
"Here are some fixup patches for 5.0-rc6"

* tag 'csky-for-linus-5.0-rc6' of git://github.com/c-sky/csky-linux:
  csky: Fixup dead loop in show_stack
  csky: Fixup io-range page attribute for mmap("/dev/mem")
  csky: coding convention: Use task_stack_page
  csky: Fixup wrong pt_regs size
  csky: Fixup _PAGE_GLOBAL bit for 610 tlb entry

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"Two more driver bugfixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: bcm2835: Clear current buffer pointers and counts after a transfer
i2c: cadence: Fix the hold bit setting

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

- tweaks to Elan drivers (both PS/2 and I2C) to support new devices.
   Also revert of one of IDs as that device should really be driven by
   i2c-hid + hid-multitouch

- a few drivers have been switched to set_brightness_blocking() call
   because they either were sleeping the their set_brightness()
   implementation or used workqueue but were not canceling it on unbind.

- ps2-gpio and matrix_keypad needed to [properly] flush their works to
   avoid potential use-after-free on unbind.

- other miscellaneous fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISK
  Input: st-keyscan - fix potential zalloc NULL dereference
  Input: apanel - switch to using brightness_set_blocking()
  Revert "Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G"
  Input: qt2160 - switch to using brightness_set_blocking()
  Input: matrix_keypad - use flush_delayed_work()
  Input: ps2-gpio - flush TX work when closing port
  Input: cap11xx - switch to using set_brightness_blocking()
  Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780
  Input: bma150 - register input device after setting private data
  Input: pwm-vibra - stop regulator after disabling pwm, not before
  Input: pwm-vibra - prevent unbalanced regulator
  Input: snvs_pwrkey - allow selecting driver for i.MX 7D

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
"A somewhat bigger ARM update, and the usual smattering of x86 bug
  fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: vmx: Fix entry number check for add_atomic_switch_msr()
  KVM: x86: Recompute PID.ON when clearing PID.SN
  KVM: nVMX: Restore a preemption timer consistency check
  x86/kvm/nVMX: read from MSR_IA32_VMX_PROCBASED_CTLS2 only when it is available
  KVM: arm64: Forbid kprobing of the VHE world-switch code
  KVM: arm64: Relax the restriction on using stage2 PUD huge mapping
  arm: KVM: Add missing kvm_stage2_has_pmd() helper
  KVM: arm/arm64: vgic: Always initialize the group of private IRQs
  arm/arm64: KVM: Don't panic on failure to properly reset system registers
  arm/arm64: KVM: Allow a VCPU to fully reset itself
  KVM: arm/arm64: Reset the VCPU without preemption and vcpu state loaded
  arm64: KVM: Don't generate UNDEF when LORegion feature is present
  KVM: arm/arm64: vgic: Make vgic_cpu->ap_list_lock a raw_spinlock
  KVM: arm/arm64: vgic: Make vgic_dist->lpi_list_lock a raw_spinlock
  KVM: arm/arm64: vgic: Make vgic_irq->irq_lock a raw_spinlock

Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISK

This adds ELAN0617 to the ACPI table to support Elan touchpad found in
Lenovo V330-15ISK.

Signed-off-by: Mauro Ciancio <mauro@acadeu.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Alexei Starovoitov says:

====================
pull-request: bpf 2019-02-16

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) fix lockdep false positive in bpf_get_stackid(), from Alexei.

2) several AF_XDP fixes, from Bjorn, Magnus, Davidlohr.

3) fix narrow load from struct bpf_sock, from Martin.

4) mips JIT fixes, from Paul.

5) gso handling fix in bpf helpers, from Willem.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Input: st-keyscan - fix potential zalloc NULL dereference

This patch fixes the following static checker warning:

drivers/input/keyboard/st-keyscan.c:156 keyscan_probe()
error: potential zalloc NULL dereference: 'keypad_data->input_dev'

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: apanel - switch to using brightness_set_blocking()

Now that LEDs core allows "blocking" flavor of "set brightness" method we
can use it and get rid of private work item. As a bonus, we are no longer
forgetting to cancel it when we unbind the driver.

Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

powerpc/64s: Fix possible corruption on big endian due to pgd/pud_present()

In v4.20 we changed our pgd/pud_present() to check for _PAGE_PRESENT
rather than just checking that the value is non-zero, e.g.:

  static inline int pgd_present(pgd_t pgd)
  {
-       return !pgd_none(pgd);
+       return (pgd_raw(pgd) & cpu_to_be64(_PAGE_PRESENT));
  }

Unfortunately this is broken on big endian, as the result of the
bitwise & is truncated to int, which is always zero because
_PAGE_PRESENT is 0x8000000000000000ul. This means pgd_present() and
pud_present() are always false at compile time, and the compiler
elides the subsequent code.

Remarkably with that bug present we are still able to boot and run
with few noticeable effects. However under some work loads we are able
to trigger a warning in the ext4 code:

  WARNING: CPU: 11 PID: 29593 at fs/ext4/inode.c:3927 .ext4_set_page_dirty+0x70/0xb0
  CPU: 11 PID: 29593 Comm: debugedit Not tainted 4.20.0-rc1 #1
  ...
  NIP .ext4_set_page_dirty+0x70/0xb0
  LR  .set_page_dirty+0xa0/0x150
  Call Trace:
   .set_page_dirty+0xa0/0x150
   .unmap_page_range+0xbf0/0xe10
   .unmap_vmas+0x84/0x130
   .unmap_region+0xe8/0x190
   .__do_munmap+0x2f0/0x510
   .__vm_munmap+0x80/0x110
   .__se_sys_munmap+0x14/0x30
   system_call+0x5c/0x70

The fix is simple, we need to convert the result of the bitwise & to
an int before returning it.

Thanks to Erhard, Jan Kara and Aneesh for help with debugging.

Fixes: da7ad366b497 ("powerpc/mm/book3s: Update pmd_present to look at _PAGE_PRESENT bit")
Cc: stable@vger.kernel.org # v4.20+
Reported-by: Erhard F. <erhard_f@mailbox.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"This week is a much smaller update, containing fixes only for TI OMAP,
  NXP i.MX and Rockchips platforms:

  omap:
   - omap4 had problems with lost timer interrupts
   - another IRQ handling issue with OMAP5
   - A workaround for a regression in the pwm-omap-dmtimer driver

  NXP i.MX:
   - eMMC was broken on the new imx8mq-evk board

  Rockchip:
   - a fix for new dtc graph warnings and a regulator fix for rock64
   - USB support broke on rk3328-rock64"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: OMAP2+: fix lack of timer interrupts on CPU1 after hotplug
  arm64: dts: imx8mq: Fix boot from eMMC
  ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized
  ARM: dts: Configure clock parent for pwm vibra
  bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()
  arm64: dts: rockchip: enable usb-host regulators at boot on rk3328-rock64
  arm64: dts: rockchip: fix graph_port warning on rk3399 bob kevin and excavator
  ARM: OMAP5+: Fix inverted nirq pin interrupts with irq_set_type
  clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting
  ARM: dts: rockchip: remove qos_cif1 from rk3188 power-domain

Merge tag 'nfsd-5.0-2' of git://linux-nfs.org/~bfields/linux

Pull more nfsd fixes from Bruce Fields:
"Two small fixes, one for crashes using nfs/krb5 with older enctypes,
  one that could prevent clients from reclaiming state after a kernel
  upgrade"

* tag 'nfsd-5.0-2' of git://linux-nfs.org/~bfields/linux:
  sunrpc: fix 4 more call sites that were using stack memory with a scatterlist
  Revert "nfsd4: return default lease period"

Merge tag 'nfs-for-5.0-4' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull more NFS client fixes from Anna Schumaker:
"Three fixes this time.

  Nicolas's is for xprtrdma completion vector allocation on single-core
  systems. Greg's adds an error check when allocating a debugfs dentry.
  And Ben's is an additional fix for nfs_page_async_flush() to prevent
  pages from accidentally getting truncated.

  Summary:

   - Make sure Send CQ is allocated on an existing compvec

   - Properly check debugfs dentry before using it

   - Don't use page_file_mapping() after removing a page"

* tag 'nfs-for-5.0-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFS: Don't use page_file_mapping after removing the page
  rpc: properly check debugfs dentry before using it
  xprtrdma: Make sure Send CQ is allocated on an existing compvec

Merge tag 'auxdisplay-for-linus-v5.0-rc7' of git://github.com/ojeda/linux

Pull auxdisplay fix from Miguel Ojeda:
"Fix potential user-after-free on ht16k33 module unload. Reported by
Sven Van Asbroeck"

* tag 'auxdisplay-for-linus-v5.0-rc7' of git://github.com/ojeda/linux:
auxdisplay: ht16k33: fix potential user-after-free on module unload

net: Add header for usage of fls64()

Fixes: 3b89ea9c5902 ("net: Fix for_each_netdev_feature on Big endian")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'compiler-attributes-for-linus-v5.0-rc7' of git://github.com/ojeda/linux

Pull compiler attributes fixes from Miguel Ojeda:
"Clean the new GCC 9 -Wmissing-attributes warnings

  The upcoming GCC 9 release extends the -Wmissing-attributes warnings
  (enabled by -Wall) to C and aliases: it warns when particular function
  attributes are missing in the aliases but not in their target, e.g.:

    void __cold f(void) {}
    void __alias("f") g(void);

  diagnoses:

    warning: 'g' specifies less restrictive attribute than
    its target 'f': 'cold' [-Wmissing-attributes]

  These patch series clean these new warnings. Most of them are caused
  by the module_init/exit macros"

Link: https://lore.kernel.org/lkml/20190125104353.2791-1-labbott@redhat.com/
* tag 'compiler-attributes-for-linus-v5.0-rc7' of git://github.com/ojeda/linux:
  include/linux/module.h: copy __init/__exit attrs to init/cleanup_module
  Compiler Attributes: add support for __copy (gcc >= 9)
  lib/crc32.c: mark crc32_le_base/__crc32c_le_base aliases as __pure

efi/arm: Revert "Defer persistent reservations until after paging_init()"

This reverts commit eff896288872d687d9662000ec9ae11b6d61766f, which
deferred the processing of persistent memory reservations to a point
where the memory may have already been allocated and overwritten,
defeating the purpose.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190215123333.21209-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

arm64, mm, efi: Account for GICv3 LPI tables in static memblock reserve table

In the irqchip and EFI code, we have what basically amounts to a quirk
to work around a peculiarity in the GICv3 architecture, which permits
the system memory address of LPI tables to be programmable only once
after a CPU reset. This means kexec kernels must use the same memory
as the first kernel, and thus ensure that this memory has not been
given out for other purposes by the time the ITS init code runs, which
is not very early for secondary CPUs.

On systems with many CPUs, these reservations could overflow the
memblock reservation table, and this was addressed in commit:

eff896288872 ("efi/arm: Defer persistent reservations until after paging_init()")

However, this turns out to have made things worse, since the allocation
of page tables and heap space for the resized memblock reservation table
itself may overwrite the regions we are attempting to reserve, which may
cause all kinds of corruption, also considering that the ITS will still
be poking bits into that memory in response to incoming MSIs.

So instead, let's grow the static memblock reservation table on such
systems so it can accommodate these reservations at an earlier time.
This will permit us to revert the above commit in a subsequent patch.

[ mingo: Minor cleanups. ]

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190215123333.21209-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

ipvs: fix warning on unused variable

When CONFIG_IP_VS_IPV6 is not defined, build produced this warning:

net/netfilter/ipvs/ip_vs_ctl.c:899:6: warning: unused variable ‘ret’ [-Wunused-variable]
int ret = 0;
^~~

Fix this by moving the declaration of 'ret' in the CONFIG_IP_VS_IPV6
section in the same function.

While at it, drop its unneeded initialisation.

Fixes: 098e13f5b21d ("ipvs: fix dependency on nf_defrag_ipv6")
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge branch 'net-dsa-b53-VLAN-and-L2-fixes'

Florian Fainelli says:

====================
net: dsa: b53: VLAN and L2 fixes

This patch series contains a collection of fixes to the b53 driver in
order to:

- consistently program the same default VLAN ID when a port is bridged
  or not
- properly account for VLAN filtering being turned on/off and turning
  on ingress VID checking accordingly
- have SYSTEMPORT properly forward BPDU frames to the network stack
  (which it did not)
- do not assume that WoL is supported by the DSA master network device
  we are connected to
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: b53: Do not program CPU port's PVID

The CPU port is special and does not need to obey VLAN restrictions as
far as untagged traffic goes, also, having the CPU port be part of a
particular PVID is against the idea of keeping it tagged in all VLANs.

Fixes: ca8931948344 ("net: dsa: b53: Keep CPU port as tagged in all VLANs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: bcm_sf2: Do not assume DSA master supports WoL

We assume in the bcm_sf2 driver that the DSA master network device
supports ethtool_ops::{get,set}_wol operations, which is not a given.
Avoid de-referencing potentially non-existent function pointers and
check them as we should.

Fixes: 96e65d7f3f88 ("net: dsa: bcm_sf2: add support for Wake-on-LAN")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: systemport: Fix reception of BPDUs

SYSTEMPORT has its RXCHK parser block that attempts to validate the
packet structures, unfortunately setting the L2 header check bit will
cause Bridge PDUs (BPDUs) to be incorrectly rejected because they look
like LLC/SNAP packets with a non-IPv4 or non-IPv6 Ethernet Type.

Fixes: 4e8aedfe78c7 ("net: systemport: Turn on offloads by default")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: b53: Properly account for VLAN filtering

VLAN filtering can be built into the kernel, and also dynamically turned
on/off through the bridge master device. Allow re-configuring the switch
appropriately to account for that by deciding whether VLAN table
(v_table) misses should lead to a drop or forward.

Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: b53: Fix default VLAN ID

We were not consistent in how the default VID of a given port was
defined, b53_br_leave() would make sure the VLAN ID would be either 0/1
depending on the switch generation, but b53_configure_vlan(), which is
the default configuration would unconditionally set it to 1. The correct
value is 1 for 5325/5365 series and 0 otherwise. To avoid repeating that
mistake ever again, introduce a helper function: b53_default_pvid() to
factor that out.

Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: validate untrusted gso packets without csum offload

Syzkaller again found a path to a kernel crash through bad gso input.
By building an excessively large packet to cause an skb field to wrap.

If VIRTIO_NET_HDR_F_NEEDS_CSUM was set this would have been dropped in
skb_partial_csum_set.

GSO packets that do not set checksum offload are suspicious and rare.
Most callers of virtio_net_hdr_to_skb already pass them to
skb_probe_transport_header.

Move that test forward, change it to detect parse failure and drop
packets on failure as those cleary are not one of the legitimate
VIRTIO_NET_HDR_GSO types.

Fixes: bfd5f4a3d605 ("packet: Add GSO/csum offload support.")
Fixes: f43798c27684 ("tun: Allow GSO using virtio_net_hdr")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Fix for_each_netdev_feature on Big endian

The features attribute is of type u64 and stored in the native endianes on
the system. The for_each_set_bit() macro takes a pointer to a 32 bit array
and goes over the bits in this area. On little Endian systems this also
works with an u64 as the most significant bit is on the highest address,
but on big endian the words are swapped. When we expect bit 15 here we get
bit 47 (15 + 32).

This patch converts it more or less to its own for_each_set_bit()
implementation which works on 64 bit integers directly. This is then
completely in host endianness and should work like expected.

Fixes: fd867d51f ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: xgmiitorgmii: Support generic PHY status read

Some PHY drivers like the generic one do not provide a read_status
callback on their own but rely on genphy_read_status being called
directly.

With the current code, this results in a NULL function pointer call.
Call genphy_read_status instead when there is no specific callback.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ip6_gre: initialize erspan_ver just for erspan tunnels

After commit c706863bc890 ("net: ip6_gre: always reports o_key to
userspace"), ip6gre and ip6gretap tunnels started reporting TUNNEL_KEY
output flag even if it is not configured.
ip6gre_fill_info checks erspan_ver value to add TUNNEL_KEY for
erspan tunnels, however in commit 84581bdae9587 ("erspan: set
erspan_ver to 1 by default when adding an erspan dev")
erspan_ver is initialized to 1 even for ip6gre or ip6gretap
Fix the issue moving erspan_ver initialization in a dedicated routine

Fixes: c706863bc890 ("net: ip6_gre: always reports o_key to userspace")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2019-02-15' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Just a few fixes this time:
* mesh rhashtable fixes from Herbert
* a small error path fix when starting AP interfaces
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

MIPS: eBPF: Remove REG_32BIT_ZERO_EX

REG_32BIT_ZERO_EX and REG_64BIT are always handled in exactly the same
way, and reg_val_propagate_range() never actually sets any register to
type REG_32BIT_ZERO_EX.

Remove the redundant & unused REG_32BIT_ZERO_EX.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

MIPS: eBPF: Always return sign extended 32b values

The function prototype used to call JITed eBPF code (ie. the type of the
struct bpf_prog bpf_func field) returns an unsigned int. The MIPS n64
ABI that MIPS64 kernels target defines that 32 bit integers should
always be sign extended when passed in registers as either arguments or
return values.

This means that when returning any value which may not already be sign
extended (ie. of type REG_64BIT or REG_32BIT_ZERO_EX) we need to perform
that sign extension in order to comply with the n64 ABI. Without this we
see strange looking test failures from test_bpf.ko, such as:

test_bpf: #65 ALU64_MOV_X:
dst = 4294967295 jited:1 ret -1 != -1 FAIL (1 times)

Although the return value printed matches the expected value, this is
only because printf is only examining the least significant 32 bits of
the 64 bit register value we returned. The register holding the expected
value is sign extended whilst the v0 register was set to a zero extended
value by our JITed code, so when compared by a conditional branch
instruction the values are not equal.

We already handle this when the return value register is of type
REG_32BIT_ZERO_EX, so simply extend this to also cover REG_64BIT.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

keys: Timestamp new keys

Set the timestamp on new keys rather than leaving it unset.

Fixes: 31d5a79d7f3d ("KEYS: Do LRU discard in full keyrings")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.morris@microsoft.com>

keys: Fix dependency loop between construction record and auth key

In the request_key() upcall mechanism there's a dependency loop by which if
a key type driver overrides the ->request_key hook and the userspace side
manages to lose the authorisation key, the auth key and the internal
construction record (struct key_construction) can keep each other pinned.

Fix this by the following changes:

(1) Killing off the construction record and using the auth key instead.

(2) Including the operation name in the auth key payload and making the
payload available outside of security/keys/.

(3) The ->request_key hook is given the authkey instead of the cons
record and operation name.

Changes (2) and (3) allow the auth key to naturally be cleaned up if the
keyring it is in is destroyed or cleared or the auth key is unlinked.

Fixes: 7ee02a316600 ("keys: Fix dependency loop between construction record and auth key")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.morris@microsoft.com>

assoc_array: Fix shortcut creation

Fix the creation of shortcuts for which the length of the index key value
is an exact multiple of the machine word size.  The problem is that the
code that blanks off the unused bits of the shortcut value malfunctions if
the number of bits in the last word equals machine word size.  This is due
to the "<<" operator being given a shift of zero in this case, and so the
mask that should be all zeros is all ones instead.  This causes the
subsequent masking operation to clear everything rather than clearing
nothing.

Ordinarily, the presence of the hash at the beginning of the tree index key
makes the issue very hard to test for, but in this case, it was encountered
due to a development mistake that caused the hash output to be either 0
(keyring) or 1 (non-keyring) only.  This made it susceptible to the
keyctl/unlink/valid test in the keyutils package.

The fix is simply to skip the blanking if the shift would be 0.  For
example, an index key that is 64 bits long would produce a 0 shift and thus
a 'blank' of all 1s.  This would then be inverted and AND'd onto the
index_key, incorrectly clearing the entire last word.

Fixes: 3cb989501c26 ("Add a generic associative array implementation.")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.morris@microsoft.com>

KEYS: allow reaching the keys quotas exactly

If the sysctl 'kernel.keys.maxkeys' is set to some number n, then
actually users can only add up to 'n - 1' keys. Likewise for
'kernel.keys.maxbytes' and the root_* versions of these sysctls. But
these sysctls are apparently supposed to be *maximums*, as per their
names and all documentation I could find -- the keyrings(7) man page,
Documentation/security/keys/core.rst, and all the mentions of EDQUOT
meaning that the key quota was *exceeded* (as opposed to reached).

Thus, fix the code to allow reaching the quotas exactly.

Fixes: 0b77f5bfb45c ("keys: make the keyring quotas controllable through /proc/sys")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.morris@microsoft.com>

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Two fairly small fixes: the qla one is a panic inducing use after free
  and the entropy fix may seem minor but it has had huge userspace
  impact thanks to an unrelated change in openssl that causes sshd to
  refuse logins until it has enough entropy for the session keys, which
  causes tens of minutes delay before the affected systems allow logins
  after reboot"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix panic from use after free in qla2x00_async_tm_cmd
  scsi: sd: fix entropy gathering for most rotational disks