drm: Extract drm_mode_config.[hc]

And shuffle the kernel-doc structure a bit since drm_crtc.[hc] now
only contains CRTC-related functions and structures.

v2:
- rebase onto drm-misc
- don't forget to move drm_mode_config_cleanup.
- move 2 internal decls under the right heading (Chris)

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Revert "drm: Add aspect ratio parsing in DRM layer"

This reverts commit 6dffd431e2296cda08e7e4f0242e02df1d1698cd.

Adding new mode flags willy nilly breaks existing userspace. We need to
coordinate this better, potentially with a new client cap that only
exposes the aspect ratio flags when userspace is prepared for them
(similar to what we do with stereo 3D modes).

This also broke things so that we would always send out VIC==0 in
the AVI infoframe unless the user specified an aspect ratio via
the mode flags. And the automagic RGB full vs. limited range
handling was similartly broken as the user mode would never match
any CEA mode.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Lin, Jia <lin.a.jia@intel.com>
Cc: Akashdeep Sharma <akashdeep.sharma@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478176304-6743-2-git-send-email-ville.syrjala@linux.intel.com

Revert "drm: Add and handle new aspect ratios in DRM layer"

This reverts commit a68362fe3e84fcbedd49939aa200519aa5410135.

Adding new mode flags willy nilly breaks existing userspace. We need to
coordinate this better, potentially with a new client cap that only
exposes the aspect ratio flags when userspace is prepared for them
(similar to what we do with stereo 3D modes).

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Lin, Jia <lin.a.jia@intel.com>
Cc: Akashdeep Sharma <akashdeep.sharma@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478176304-6743-1-git-send-email-ville.syrjala@linux.intel.com

drm/print: Move kerneldoc next to definition

kerneldoc expects the comment next to definitions, otherwise it can't
pick up exported vs. internal stuff.

This fixes a warning from the doc build done with:

$ make DOCBOOKS="" htmldocs

Fixes: d8187177b0b1 ("drm: add helper for printing to log or seq_file")
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-8-daniel.vetter@ffwll.ch

drm: Consolidate dumb buffer docs

Put the callback docs into struct drm_driver, and the small overview
into a DOC comment.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-7-daniel.vetter@ffwll.ch

drm: Clean up kerneldoc for struct drm_driver

Just cleans up what's there, still plenty missing.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-6-daniel.vetter@ffwll.ch

drm: Extract drm_drv.h

I want to move dumb buffer documentation into the right vfuncs, and
for that I first need to be able to pull that into kerneldoc without
having to clean up all of drmP.h. Also, header-splitting is nice.

While at it shuffle all the function declarations for drm_drv.c into
the right spots, and drop the kerneldoc for drm_minor_acquire/release
since it's only used internally.

v2: Keep all existing copyright notices (Chris).

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

doc/dma-buf: Fix up include directives

Would be great if everony could add

$ make DOCBOOKS="" htmldocs

to their build scripts to catch these. 0day should also report them,
not sure why it failed to spot this.

Fixes: f54d1867005c ("dma-buf: Rename struct fence to dma_fence")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-4-daniel.vetter@ffwll.ch

drm/i915: Fixup kerneldoc includes

Would be great if everony could add

$ make DOCBOOKS="" htmldocs

to their build scripts to catch these. 0day should also report them,
not sure why it failed to spot this.

Fixes: b42fe9ca0a1e ("drm/i915: Split out i915_vma.c")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-3-daniel.vetter@ffwll.ch

drm: Extract drm_dumb_buffers.c

Just code movement, doc cleanup will follow up later.

v2: Keep all the copyright notices.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-2-daniel.vetter@ffwll.ch

drm/fb_cma_helper: Add missing forward declaration

Add missing forward declaration for struct drm_plane and drm_plane_state,
which causes the following warning in the VC4 driver (can be replicated
by building using bcm2835_defconfig):

In file included from drivers/gpu/drm/vc4/vc4_drv.c:18:0:
include/drm/drm_fb_cma_helper.h:45:13: warning: ‘struct drm_plane_state’ declared inside parameter list will not be visible outside of this definition or declaration
      struct drm_plane_state *state);
             ^~~~~~~~~~~~~~~
include/drm/drm_fb_cma_helper.h:44:34: warning: ‘struct drm_plane’ declared inside parameter list will not be visible outside of this definition or declaration
 int drm_fb_cma_prepare_fb(struct drm_plane *plane,

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161115105529.3227-1-marex@denx.de

drm: zte: checking for NULL instead of IS_ERR()

drm_dev_alloc() never returns NULL, it only returns error pointers on
error.

Fixes: 0a886f59528a ("drm: zte: add initial vou drm driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161115095301.GC15424@mwanda

drm: don't let crtc_ww_class leak out

kbuild spotted this error, with drm/msm patches that add a new
modeset-lock in the driver and driver built as a module:

  ERROR: "crtc_ww_class" [drivers/gpu/drm/msm/msm.ko] undefined!

Really the only reason for crtc_ww_class not being internal to
drm_modeset_lock.c is that drm_modeset_lock_init() was static-inline
(for no particularly good reason).

Fix that, and move crtc_ww_class into drm_modeset_lock.c.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479163257-18703-1-git-send-email-robdclark@gmail.com

dma-buf: Use fence_get_rcu_safe() for retrieving the exclusive fence

The current code is subject to a race where we may try to acquire a
reference on a stale fence:

[13703.335118] WARNING: CPU: 1 PID: 14975 at ./include/linux/kref.h:46 i915_gem_object_wait+0x1a3/0x1c0
[13703.335184] Modules linked in:
[13703.335202] CPU: 1 PID: 14975 Comm: gem_concurrent_ Not tainted 4.9.0-rc4+ #26
[13703.335216] Hardware name:                  /        , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015
[13703.335233]  ffffc90002f5bcc8 ffffffff812807de 0000000000000000 0000000000000000
[13703.335257]  ffffc90002f5bd08 ffffffff81073811 0000002e80000000 ffff88026bf7c780
[13703.335279]  7fffffffffffffff 0000000000000001 ffff88027045a550 ffff88026bf7c780
[13703.335301] Call Trace:
[13703.335316]  [<ffffffff812807de>] dump_stack+0x4d/0x6f
[13703.335331]  [<ffffffff81073811>] __warn+0xc1/0xe0
[13703.335343]  [<ffffffff810738e8>] warn_slowpath_null+0x18/0x20
[13703.335355]  [<ffffffff813ac443>] i915_gem_object_wait+0x1a3/0x1c0
[13703.335367]  [<ffffffff813ae8ec>] i915_gem_set_domain_ioctl+0xcc/0x330
[13703.335386]  [<ffffffff813534ab>] drm_ioctl+0x1cb/0x410
[13703.335400]  [<ffffffff813ae820>] ? i915_gem_obj_prepare_shmem_write+0x1d0/0x1d0
[13703.335416]  [<ffffffff8135359b>] ? drm_ioctl+0x2bb/0x410
[13703.335429]  [<ffffffff8117d32f>] do_vfs_ioctl+0x8f/0x5c0
[13703.335442]  [<ffffffff8117d89c>] SyS_ioctl+0x3c/0x70
[13703.335456]  [<ffffffff815a07a4>] entry_SYSCALL_64_fastpath+0x17/0x98
[13703.335558] ---[ end trace fd24176416ba6981 ]---
[13703.382778] general protection fault: 0000 [#1] SMP
[13703.382802] Modules linked in:
[13703.382816] CPU: 1 PID: 14967 Comm: gem_concurrent_ Tainted: G        W       4.9.0-rc4+ #26
[13703.382828] Hardware name:                  /        , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015
[13703.382841] task: ffff880275458000 task.stack: ffffc90002f18000
[13703.382849] RIP: 0010:[<ffffffff813b3534>]  [<ffffffff813b3534>] i915_gem_request_retire+0x2b4/0x320
[13703.382870] RSP: 0018:ffffc90002f1bbc8  EFLAGS: 00010293
[13703.382878] RAX: dead000000000200 RBX: ffff88026bf7dce8 RCX: dead000000000100
[13703.382887] RDX: dead000000000100 RSI: ffff88026bf7c930 RDI: ffff88026bf7dd00
[13703.382897] RBP: ffffc90002f1bbf8 R08: 00000000ffffffff R09: ffff88026b89a000
[13703.382905] R10: 0000000000000001 R11: ffff88026bbe8fe0 R12: ffff88026bf7c000
[13703.382913] R13: ffff880275af8000 R14: ffff88026bf7c180 R15: dead000000000200
[13703.382922] FS:  00007f89e787d740(0000) GS:ffff88027fd00000(0000) knlGS:0000000000000000
[13703.382934] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[13703.382942] CR2: 00007f9053d2e000 CR3: 000000026d414000 CR4: 00000000001006e0
[13703.382951] Stack:
[13703.382958]  ffff880275413000 ffffc90002f1bde8 ffff880275af8000 ffff880274e8a600
[13703.382976]  ffff880276a06000 ffffc90002f1bde8 ffffc90002f1bc38 ffffffff813b48c5
[13703.382995]  ffffc90002f1bc00 ffffc90002f1bde8 ffff88026972a440 0000000000000000
[13703.383021] Call Trace:
[13703.383032]  [<ffffffff813b48c5>] i915_gem_request_alloc+0xa5/0x350
[13703.383043]  [<ffffffff813a17c3>] i915_gem_do_execbuffer.isra.41+0x7b3/0x18b0
[13703.383055]  [<ffffffff813b144c>] ? i915_gem_object_get_sg+0x25c/0x2b0
[13703.383065]  [<ffffffff813b1d4d>] ? i915_gem_object_get_page+0x1d/0x50
[13703.383076]  [<ffffffff813b28cc>] ? i915_gem_pwrite_ioctl+0x66c/0x6d0
[13703.383086]  [<ffffffff813a2c25>] i915_gem_execbuffer2+0x95/0x1e0
[13703.383096]  [<ffffffff813534ab>] drm_ioctl+0x1cb/0x410
[13703.383105]  [<ffffffff813a2b90>] ? i915_gem_execbuffer+0x2d0/0x2d0
[13703.383117]  [<ffffffff810c3df0>] ? hrtimer_start_range_ns+0x1a0/0x310
[13703.383128]  [<ffffffff8117d32f>] do_vfs_ioctl+0x8f/0x5c0
[13703.383140]  [<ffffffff810c60e8>] ? SyS_timer_settime+0x118/0x1a0
[13703.383150]  [<ffffffff8117d89c>] SyS_ioctl+0x3c/0x70
[13703.383162]  [<ffffffff815a07a4>] entry_SYSCALL_64_fastpath+0x17/0x98
[13703.383172] Code: 49 39 c6 48 8d 70 e8 48 8d 5f e8 75 16 eb 47 48 8d 43 18 48 8b 53 18 48 89 de 49 39 c6 48 8d 5a e8 74 33 48 8b 56 08 48 8b 46 10 <48> 89 42 08 48 89 10 f6 46 38 01 48 89 4e 08 4c 89 7e 10 74 cf
[13703.383557] RIP  [<ffffffff813b3534>] i915_gem_request_retire+0x2b4/0x320
[13703.383570]  RSP <ffffc90002f1bbc8>
[13703.383586] ---[ end trace fd24176416ba6982 ]---

This is fixed by using the kref_get_unless_zero() as a full memory
barrier to validate the fence is still the current exclusive fence before
returning it back to the caller. (Note the fix only requires using
dma_fence_get_rcu() and correct handling, but we may as well use the
helper rather than inline equivalent code.)

Note: Issue can only be hit with the i915 driver.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org
Fixes: d07f0e59b2c7 ("drm/i915: Move GEM activity tracking into a common struct reservation_object")
Reviewed-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115540.31155-1-chris@chris-wilson.co.uk

drm/imx: Switch to drm_fb_cma_prepare_fb() helper

Remove the common code from the driver and use the
drm_fb_cma_prepare_fb() helper instead.
Moveover, call the helper from prepare_fb() plane hook .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114100732.3446-2-marex@denx.de
Link: http://patchwork.freedesktop.org/patch/msgid/1476451342-146510-1-git-send-email-dvyukov@google.com

drm/fb_cma_helper: Add drm_fb_cma_prepare_fb() helper

Add new drm_fb_cma_prepare_fb() helper function extracted from the
imx-drm driver. This function checks if the plane has DMABUF attached
to it, extracts the exclusive fence from it and attaches it to the
plane state for the atomic helper to wait on it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114100732.3446-1-marex@denx.de

drm/gma500: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

This refactoring leads to real functional changes in the driver.

Now the struct psbfb_ops implements two additional members:

       .fb_setcmap     = drm_fb_helper_setcmap,
       .fb_pan_display = drm_fb_helper_pan_display,

and the struct psbfb_roll_ops implements one additional member:

       .fb_setcmap     = drm_fb_helper_setcmap,

and the struct psbfb_unaccel_ops implements two additional members:

       .fb_setcmap     = drm_fb_helper_setcmap,
       .fb_pan_display = drm_fb_helper_pan_display,

These changes are not tested.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-19-git-send-email-contact@stefanchrist.eu

drm/i915: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-18-git-send-email-contact@stefanchrist.eu

drm/omapdrm: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-17-git-send-email-contact@stefanchrist.eu

drm/virtio: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

This patch removes a TODO comment in the code. I do not know whether it
is still relevant.

Cc: David Airlie <airlied@linux.ie>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-16-git-send-email-contact@stefanchrist.eu

drm/msm: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-15-git-send-email-contact@stefanchrist.eu

drm/udl: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-14-git-send-email-contact@stefanchrist.eu

drm/tegra: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-13-git-send-email-contact@stefanchrist.eu

drm/radeon: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-12-git-send-email-contact@stefanchrist.eu

drm/rockchip: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

Cc: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-11-git-send-email-contact@stefanchrist.eu

drm/qxl: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

This patch removes a TODO comment in the code. I do not know whether it
is still relevant.

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-10-git-send-email-contact@stefanchrist.eu

drm/nouveau: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-9-git-send-email-contact@stefanchrist.eu

drm/exynos: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-8-git-send-email-contact@stefanchrist.eu

drm/fb_cma_helper: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-7-git-send-email-contact@stefanchrist.eu

drm/bochs: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-6-git-send-email-contact@stefanchrist.eu

drm/armada: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-5-git-send-email-contact@stefanchrist.eu

drm/amdgpu: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-4-git-send-email-contact@stefanchrist.eu

drm/fb-helper: add fb_debug_* to DRM_FB_HELPER_DEFAULT_OPS

Add additional members fb_debug_enter and fb_debug_leave to helper
define. They are shared by all fb_ops implementations.

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-3-git-send-email-contact@stefanchrist.eu

drm/fb-helper: fix segfaults in drm_fb_helper_debug_*

A drm driver that is implementing

      fb_debug_enter and fb_debug_leave

in struct fb_ops with drm fb helper functions

     drm_fb_helper_debug_enter and drm_fb_helper_debug_leave

must also implement the callback 'mode_set_base_atomic' in struct
drm_crtc_helper_funcs. See Documentation/DocBook/kgdb.tmpl.  The current
implementation will segfault when 'mode_set_base_atomic' is a NULL
pointer.

Before this patch at least the drm drivers armada, ast, qxl, udl and
virtio do not have a 'mode_set_base_atomic' implementation but using
drm_fb_helper_debug_(enter|leave). So these drivers may segfault when
callbacks fb_debug_(enter|leave) are called.

Avoid the issue by just checking for NULL pointers. So all drivers can
unconditionally implement fb_debug_(enter|leave) with the drm_fb_helper
functions. If callback 'mode_set_base_atomic' is not implemented, the
code in drm_fb_helper_debug_(enter|leave) does effectively nothing.

Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-2-git-send-email-contact@stefanchrist.eu

drm/ast: free correct pointer in astfb_create() error paths

In the err_free_vram and err_release_fbi error paths in astfb_create(), we
attempt to free afbdev->sysram. The only jumps to these error paths occur
before we assign afbdev->sysram = sysram. Free sysram instead.

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114030359.27852-1-andrew.donnellan@au1.ibm.com

drm/sun4i: constify component_ops structures

These component_ops structures are only used as the second argument to
component_add and component_del, which are declared as const, so the
structures can be declared as const as well.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@

static struct component_ops i@p = { ... };

@ok1@
identifier r.i;
expression e1;
position p;
@@

component_add(e1,&i@p)

@ok2@
identifier r.i;
expression e1;
position p;
@@

component_del(e1, &i@p)

@bad@
position p != {r.p,ok1.p,ok2.p};
identifier r.i;
struct component_ops e;
@@

e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@

static
+const
 struct component_ops i = { ... };
// </smpl>

The result of the size command before the change is (arm):

   text       data         bss     dec      hex filename
   5266        236           8    5510     1586 sun4i_backend.o
   6393        236           8    6637     19ed sun4i_tcon.o
   3700        368           8    4076      fec sun4i_tv.o
   1668        108           0    1776      6f0 sun6i_drc.o

and after the change:

   text       data         bss     dec     hex filename
   5274        228           8    5510    1586 sun4i_backend.o
   6401        228           8    6637    19ed sun4i_tcon.o
   3708        360           8    4076     fec sun4i_tv.o
   1676        100           0    1776     6f0 sun6i_drc.o

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478971198-3659-1-git-send-email-Julia.Lawall@lip6.fr

drm: move allocation out of drm_get_format_name()

The function's behaviour was changed in 90844f00049e, without changing
its signature, causing people to keep using it the old way without
realising they were now leaking memory.
Rob Clark also noticed it was also allocating GFP_KERNEL memory in
atomic contexts, breaking them.

Instead of having to allocate GFP_ATOMIC memory and fixing the callers
to make them cleanup the memory afterwards, let's change the function's
signature by having the caller take care of the memory and passing it to
the function.
The new parameter is a single-field struct in order to enforce the size
of its buffer and help callers to correctly manage their memory.

Fixes: 90844f00049e ("drm: make drm_get_format_name thread-safe")
Cc: Rob Clark <robdclark@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Sinclair Yeh <syeh@vmware.com> (vmwgfx)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161112011309.9799-1-eric@engestrom.ch

drm: Add missing mutex_destroy in drm_dev_init/release

Add 3 missing mutex_destroy to drm_dev_init teardown and
drm_dev_release.

v2:
- Also include drm_dev_release

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478785835-4142-1-git-send-email-joonas.lahtinen@linux.intel.com
Link: http://patchwork.freedesktop.org/patch/msgid/1478785835-4142-1-git-send-email-joonas.lahtinen@linux.intel.com

Merge tag 'zxdrm-4.10' of git://git./linux/kernel/git/shawnguo/linux into drm-next

ZTE zxdrm driver support for 4.10:

This is the initial ZTE VOU display controller DRM/KMS driver.  There
are still some features to be added, like overlay plane, scaling, and
more output devices support.  But it's already useful with dual CRTCs
and HDMI display working.

[airlied: use drm_format_plane_cpp instead of legacy api]
* tag 'zxdrm-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  MAINTAINERS: add an entry for ZTE ZX DRM driver
  drm: zte: add initial vou drm driver
  dt-bindings: add bindings doc for ZTE VOU display controller

Merge branch 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next

Here is the list of fixes that I have for drm/mali-dp. They've been on the mailing
lists for a while and merged into linux-next for a few weeks, but due to holiday and
travel to Linux Plumbers I did not send the pull request earlier. I don't know if
these patches can be pulled into v4.9 still (they will conflict with Ville Syrjälä's
cleanup of DRM_ROTATE series that is already in drm-next), but if you do that would
be great.

* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
  drm: mali-dp: Clear CVAL when leaving config mode
  drm/arm: mark symbols static where possible
  drm: mali-dp: Add support for setting plane's rotation property from userspace.
  drm: mali-dp: Don't set DRM_PLANE_COMMIT_ACTIVE_ONLY
  drm: mali-dp: Store internal format and n_planes in plane state
  drm: mali-dp: Enable alpha blending
  drm: mali-dp: Refactor plane initialisation
  arm: mali-dp: Extract mode_config cleanup into malidp_fini
  drm: mali-dp: Add pitch alignment check for planes
  drm: mali-dp: Add pitch alignment check function
  drm: mali-dp: Set the drm->irq_enabled flag to match driver's state.
  drm: mali-dp: Clear the config_valid flag before using it in wait_event.

Merge tag 'dw-hdmi-next-2016-09-19' of git://git.pengutronix.de/git/pza/linux into drm-next

dw-hdmi i2c master controller

- add support for the HDMI I2C master controller, for boards that
  can have their DDC pins connected only to the HDMI TX directly.

* tag 'dw-hdmi-next-2016-09-19' of git://git.pengutronix.de/git/pza/linux:
  drm: bridge/dw_hdmi: add dw hdmi i2c bus adapter support
  drm: dw_hdmi: use of_get_i2c_adapter_by_node interface

Merge tag 'imx-drm-next-2016-11-10' of git://git.pengutronix.de/git/pza/linux into drm-next

imx-drm plane update cleanup, YUV formats

- request modeset if plane offsets changed, only the plane base
  address can be changed without disabling the plane IDMAC channel.
- cleanup of plane atomic_update
- remove unused ipu_cpmem_set_yuv_planar function
- support YUV 4:4:4, 4:2:2, NV12 and NV16 plane formats
- not only mask interrupts during irq init, also clear them
- remove a legacy check from imx-ldb
- add support to set the CSI downsizing bits
- silence an obnoxious warning during modeset

* tag 'imx-drm-next-2016-11-10' of git://git.pengutronix.de/git/pza/linux:
  gpu: ipu-di: silence videomode logspam
  gpu: ipu-v3: add ipu_csi_set_downsize
  drm/imx: imx-ldb: remove unnecessary double disable check
  gpu: ipu-v3: initially clear all interrupts
  drm/imx: ipuv3-plane: add support for YUV 4:2:2 and 4:4:4, NV12, and NV16 formats
  gpu: ipu-v3: add YUV 4:4:4 support
  gpu: ipu-cpmem: remove unused ipu_cpmem_set_yuv_planar function
  drm/imx: ipuv3-plane: let drm_plane_state_to_ubo/vbo handle chroma subsampling other than 4:2:0
  drm/imx: ipuv3-plane: merge ipu_plane_atomic_set_base into atomic_update
  drm/imx: ipuv3-plane: request modeset if plane offsets changed

Merge tag 'topic/drm-misc-2016-11-10' of git://anongit.freedesktop.org/drm-intel into drm-next

- better atomic state debugging from Rob
- fence prep from gustavo
- sumits flushed out his backlog of pending dma-buf/fence patches from
  various people
- drm_mm leak debugging plus trying to appease Kconfig (Chris)
- a few misc things all over

* tag 'topic/drm-misc-2016-11-10' of git://anongit.freedesktop.org/drm-intel: (35 commits)
  drm: Make DRM_DEBUG_MM depend on STACKTRACE_SUPPORT
  drm/i915: Restrict DRM_DEBUG_MM automatic selection
  drm: Restrict stackdepot usage to builtin drm.ko
  drm/msm: module param to dump state on error irq
  drm/msm/mdp5: add atomic_print_state support
  drm/atomic: add debugfs file to dump out atomic state
  drm/atomic: add new drm_debug bit to dump atomic state
  drm: add helpers to go from plane state to drm_rect
  drm: add helper for printing to log or seq_file
  drm: helper macros to print composite types
  reservation: revert "wait only with non-zero timeout specified (v3)" v2
  drm/ttm: fix ttm_bo_wait
  dma-buf/fence: revert "don't wait when specified timeout is zero" (v2)
  dma-buf/fence: make timeout handling in fence_default_wait consistent (v2)
  drm/amdgpu: add the interface of waiting multiple fences (v4)
  dma-buf: return index of the first signaled fence (v2)
  MAINTAINERS: update Sync File Framework files
  dma-buf/sw_sync: put fence reference from the fence creation
  dma-buf/sw_sync: mark sync_timeline_create() static
  drm: Add stackdepot include for DRM_DEBUG_MM
  ...

Merge tag 'drm-intel-next-2016-11-08' of git://anongit.freedesktop.org/git/drm-intel into drm-next

- gpu idling rework for s/r (Imre)
- vlv mappable scanout fix
- speed up probing in resume (Lyude)
- dp audio workarounds for gen9 (Dhinakaran)
- more conversion to using dev_priv internally (Ville)
- more gen9+ wm fixes and cleanups (Maarten)
- shrinker cleanup&fixes (Chris)
- reorg plane init code (Ville)
- implement support for multiple timelines (prep work for scheduler)
  from Chris and all
- untangle dev->struct_mutex locking as prep for multiple timelines
  (Chris)
- refactor bxt phy code and collect it all in intel_dpio_phy.c (Ander)
- another gvt with bugfixes all over from Zhenyu
- piles of lspcon fixes from Imre
- 90/270 rotation fixes (Ville)
- guc log buffer support (Akash+Sagar)
- fbc fixes from Paulo
- untangle rpm vs. tiling-fences/mmaps (Chris)
- fix atomic commit to wait on the right fences (Daniel Stone)

* tag 'drm-intel-next-2016-11-08' of git://anongit.freedesktop.org/git/drm-intel: (181 commits)
  drm/i915: Update DRIVER_DATE to 20161108
  drm/i915: Mark CPU cache as dirty when used for rendering
  drm/i915: Add assert for no pending GPU requests during suspend/resume in LR mode
  drm/i915: Make sure engines are idle during GPU idling in LR mode
  drm/i915: Avoid early GPU idling due to race with new request
  drm/i915: Avoid early GPU idling due to already pending idle work
  drm/i915: Limit Valleyview and earlier to only using mappable scanout
  drm/i915: Round tile chunks up for constructing partial VMAs
  drm/i915: Remove the vma from the object list upon close
  drm/i915: Reinit polling before hpd when resuming
  drm/i915: Remove redundant reprobe in i915_drm_resume
  drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms
  drm/i915/dp: BDW cdclk fix for DP audio
  drm/i915: Fix pages pin counting around swizzle quirk
  drm/i915: Fix test on inputs for vma_compare()
  drm/i915/guc: Cache the client mapping
  drm/i915: Tidy slab cache allocations
  drm/i915: Introduce HAS_64BIT_RELOC
  drm/i915: Show the execlist queue in debugfs/i915_engine_info
  drm/i915: Unify global_list into global_link
  ...

drm: Make DRM_DEBUG_MM depend on STACKTRACE_SUPPORT

0day continues to complain about trying to save a stacktrace for the
users of the drm_mm range allocator. This time, it is that m68k has no
save_stack_trace(), which is apparently guarded by STACKTRACE_SUPPORT.
Make it depend so!

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161109143906.11057-1-chris@chris-wilson.co.uk

gpu: ipu-di: silence videomode logspam

Adapting the videomode to the hardware constraints is something that
can and must happen during normal operation and isn't something that
the user can avoid. So printing a warning each time it happens isn't
helpful.

Demote this message to the debug level.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

drm/i915: Restrict DRM_DEBUG_MM automatic selection

DRM_DEBUG_MM is only valid if the DRM.ko is builtin as currently
depot_save_stack is not exported.

Fixes: 5c7fcf2db027 ("drm/i915: Enable drm_mm debug when enabling DRM_I915_DEBUG")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108131917.6253-1-chris@chris-wilson.co.uk

drm: Restrict stackdepot usage to builtin drm.ko

I misread the kbuild result thinking that we had missed the include
(which we had for completeness anyway), what kbuild was actually warning
me about was that depot_save_stack was not exported.

Temporarily fix this by only selecting STACKDEPOT iff drm.ko is builtin

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 5705670d0463 ("drm: Track drm_mm allocators and show leaks on shutdown")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108131917.6253-2-chris@chris-wilson.co.uk

drm/msm: module param to dump state on error irq

Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-8-git-send-email-robdclark@gmail.com

drm/msm/mdp5: add atomic_print_state support

We subclass drm_plane_state, so add mdp5_plane_atomic_print_state() to
dump out our own driver specific plane state.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-7-git-send-email-robdclark@gmail.com

drm/atomic: add debugfs file to dump out atomic state

Useful to dump current state from debugfs, if turning on the drm.debug
bit is too much overhead.

The drm_state_dump() can also be used by drivers, for example to
implement a module param that dumps state on error irqs.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-6-git-send-email-robdclark@gmail.com

drm/atomic: add new drm_debug bit to dump atomic state

The contents of drm_{plane,crtc,connector}_state is dumped before
commit.  If a driver extends any of the state structs, it can implement
the corresponding funcs->atomic_print_state() to add it's own driver
specific state.

Signed-off-by: Rob Clark <robdclark@gmail.com>
[seanpaul resolved conflict in drm_plane.h]
Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm: add helpers to go from plane state to drm_rect

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
[seanpaul resolved conflict in drm_plane.h]
Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm: add helper for printing to log or seq_file

Sometimes it is nice not to duplicate equivalent printk() and
seq_printf() code.

v2: simplify things w/ va_format, and use dev_printk, docs

Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-3-git-send-email-robdclark@gmail.com

drm: helper macros to print composite types

I'll want to print things in a similar way in a later patch.  This will
make it easier.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-2-git-send-email-robdclark@gmail.com

reservation: revert "wait only with non-zero timeout specified (v3)" v2

Reverts commit fb8b7d2b9d80
("reservation: wait only with non-zero timeout specified (v3)")

Otherwise signaling might never be activated on the fences. This can
result in infinite waiting with hardware which has unreliable interrupts.

v2: still return one when the timeout is zero and we don't have any fences.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
  [sumits: fix checkpatch warnings]
Link: http://patchwork.freedesktop.org/patch/msgid/1478553376-18575-4-git-send-email-alexander.deucher@amd.com

drm/ttm: fix ttm_bo_wait

reservation_object_wait_timeout_rcu() should enable signaling even with a
zero timeout, but ttm_bo_wait() can also be called from atomic context and
then it is not a good idea to do this.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
  [sumits: fix checkpatch warnings]
Link: http://patchwork.freedesktop.org/patch/msgid/1478553376-18575-3-git-send-email-alexander.deucher@amd.com

dma-buf/fence: revert "don't wait when specified timeout is zero" (v2)

Reverts commit 847b19a39e4c
("dma-buf/fence: don't wait when specified timeout is zero")

When we don't call the wait function software signaling might never be
activated. This can cause infinite polling loops with unreliable interrupt
driven hardware.

v2: rebase on drm-next

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
  [sumits: reword commit msg for checkpatch warnings]
Link: http://patchwork.freedesktop.org/patch/msgid/1478553376-18575-2-git-send-email-alexander.deucher@amd.com

dma-buf/fence: make timeout handling in fence_default_wait consistent (v2)

Kernel functions taking a timeout usually return 1 on success even
when they get a zero timeout.

v2: agd: rebase on drm-next

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478553376-18575-1-git-send-email-alexander.deucher@amd.com

drm/amdgpu: add the interface of waiting multiple fences (v4)

v2: agd: rebase and squash in all the previous optimizations and
changes so everything compiles.
v3: squash in Slava's 32bit build fix
v4: rebase on drm-next (fence -> dma_fence),
    squash in Monk's ioctl update patch

Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
 [sumits: fix checkpatch warnings]
Link: http://patchwork.freedesktop.org/patch/msgid/1478290570-30982-2-git-send-email-alexander.deucher@amd.com

dma-buf: return index of the first signaled fence (v2)

Return the index of the first signaled fence.  This information
is useful in some APIs like Vulkan.

v2: rebase on drm-next (fence -> dma_fence)

Signed-off-by: monk.liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
 [sumits: fix warnings]
Link: http://patchwork.freedesktop.org/patch/msgid/1478290570-30982-1-git-send-email-alexander.deucher@amd.com

MAINTAINERS: update Sync File Framework files

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1477515862-7980-1-git-send-email-gustavo@padovan.org

dma-buf/sw_sync: put fence reference from the fence creation

Once sw_sync_ioctl_create_fence() returns we no longer have the
*pt pointer to the fence base object thus we need to put the reference
we have from the fence creation to keep a correct reference accounting.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1477515599-7685-1-git-send-email-gustavo@padovan.org

dma-buf/sw_sync: mark sync_timeline_create() static

We get 1 warning when building kernel with W=1:
drivers/dma-buf/sw_sync.c:87:23: warning: no previous prototype for 'sync_timeline_create' [-Wmissing-prototypes]

In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
So this patch marks it 'static'.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1474202961-10099-1-git-send-email-baoyou.xie@linaro.org

drm: Add stackdepot include for DRM_DEBUG_MM

0day found that stackdepot.h doesn't get automatically included on all
architectures, so remember to add our #include.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 5705670d0463 ("drm: Track drm_mm allocators and show leaks on shutdown")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108115601.22873-1-chris@chris-wilson.co.uk

drm: mali-dp: Clear CVAL when leaving config mode

It's possible for CVAL to get set whilst we are in config mode. If this
happens, afer we leave config mode the HW will latch whatever
configuration is in the registers at the next vsync. Most likely this
will be a partial configuration, as we'll be racing against the ongoing
atomic_commit.

To avoid this, clear CVAL before leaving config mode.

Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

drm/plane: add inline doc for struct drm_plane

Some of the members of struct drm_plane had extra comments so for these
add inline kernel comment to consolidate all documentation in one place.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
[danvet: Bikeshed a bit more to have real paragraphs with real
sentences.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478513013-3221-4-git-send-email-gustavo@padovan.org

drm/msm: use drm_atomic_set_fence_for_plane() to set the fence

drm_atomic_set_fence_for_plane() is smart and won't overwrite
plane_state->fence if the user already set an explicit fence there.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478513013-3221-3-git-send-email-gustavo@padovan.org

drm/imx: use drm_atomic_set_fence_for_plane() to set the fence

drm_atomic_set_fence_for_plane() is smart and won't overwrite
plane_state->fence if the user already set an explicit fence there.

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478513013-3221-2-git-send-email-gustavo@padovan.org

drm/atomic: add drm_atomic_set_fence_for_plane()

This new function should be used by drivers when setting a implicit
fence for the plane. It abstracts the fact that the user might have
chosen explicit fencing instead.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478513013-3221-1-git-send-email-gustavo@padovan.org

drm: don't override possible_crtcs for primary/cursor planes

It is kind of a pointless restriction.  If userspace does silly things
like using crtcA's cursor plane on crtcB, and then setcursor on crtcA,
it will end up with the overlay disabled on crtcB.  But userspace is
allowed to shoot itself like this.

v2: don't WARN_ON() if caller did not set ->possible_crtcs.  This keeps
    the existing behavior by default, if caller does not set the
    ->possible_crtcs.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478357521-26542-1-git-send-email-robdclark@gmail.com

drm/uapi: Add a warning that mode flags must match the xrandr definitions

Existing userspace expected the mode flags to match the xrandr
definitions 1:1, and even adding new flags in he previously unused
bits is likely to break existing userspace. Add a comment warning
people about this potential trap.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: "Lin, Jia" <lin.a.jia@intel.com>
Cc: Akashdeep Sharma <akashdeep.sharma@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478182201-26086-1-git-send-email-ville.syrjala@linux.intel.com

drm/edid: Add the missing "Hz" to VIC 58,59 comment

All the VICs apart from 58 and 59 have the word "Hz" included in the
comment. Include it for 59 and 59 as well.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478177609-16762-1-git-send-email-ville.syrjala@linux.intel.com

drm/gma500: remove unused ioctl declarations

psb_gem_create_ioctl and psb_gem_mmap_ioctl are not used currently,
their declarations are useless.

Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477990879-13139-1-git-send-email-jiang.biao2@zte.com.cn

drm/gma500: make function static to eliminate compiling warning

psb_gtt_remove is only used in this file, and make it static to
eliminate missing-prototypes compiling warning.

Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477972185-24826-1-git-send-email-jiang.biao2@zte.com.cn

drm/atomic-helper: fix reference to drm_atomic_helper_commit_planes

The kernel-doc references drm_atomic_commit_planes() which does not
exist. The functions name is drm_atomic_helper_commit_planes().

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161031173646.19453-1-stefan@agner.ch

drm: update the documentation of drm_framebuffer_unregister_private

Add obvious description to drm_framebuffer_unregister_private()
to explain it is deprecated.

Signed-off-by: Rongrong Zou <zourongrong@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477915196-100299-1-git-send-email-zourongrong@gmail.com

drm/i915: Enable drm_mm debug when enabling DRM_I915_DEBUG

A frequent issue that arises on shutdown is the drm_mm range manager
complaining of a leak. To aide debugging those, drm can now track the
allocation callsite and print those for the leaks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161029184214.17329-2-chris@chris-wilson.co.uk

drm: Track drm_mm allocators and show leaks on shutdown

We can use the kernel's stack tracer and depot to record the allocation
site of every drm_mm user. Then on shutdown, as well as warning that
allocated nodes still reside with the drm_mm range manager, we can
display who allocated them to aide tracking down the leak.

v2: Move Kconfig around so it lies underneath the DRM options submenu.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161031090806.20073-1-chris@chris-wilson.co.uk

drm/i915: Update DRIVER_DATE to 20161108

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Mark CPU cache as dirty when used for rendering

On LLC, or even snooped, machines rendering via the GPU ends up in the CPU
cache. This cacheline dirt also needs to be flushed to main memory when
moving to an incoherent domain, such as the display's scanout engine.
Mostly, this happens because either the object is marked as dirty from
its first use or is avoided by setting the object into the display
domain from the start.

v2: Treat WT as not requiring a clflush prior to use on the display
engine as well.

Fixes: 0f71979ab7fb ("drm/i915: Performed deferred clflush inside set-cache-level")
References: https://bugs.freedesktop.org/show_bug.cgi?id=95414
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107165204.7008-1-chris@chris-wilson.co.uk

gpu: ipu-v3: add ipu_csi_set_downsize

Support downsizing to 1/2 width and/or height in the CSI.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

drm/imx: imx-ldb: remove unnecessary double disable check

Since the atomic modeset conversion, this should not be an issue
anymore.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

drm/i915: Add assert for no pending GPU requests during suspend/resume in LR mode

During resume we will reset the SW/HW tracking for each ring head/tail
pointers and so are not prepared to replay any pending requests (as
opposed to GPU reset time). Add an assert for this both to the suspend
and the resume code.

v2:
- Check for ELSP port idle already during suspend and check !gt.awake
  during resume. (Chris)
v3:
- Move the !gt.awake check to i915_gem_resume().
v4:
- s/intel_lr_engines_idle/intel_execlists_idle/ (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-4-git-send-email-imre.deak@intel.com

drm/i915: Make sure engines are idle during GPU idling in LR mode

We assume that the GPU is idle once receiving the seqno via the last
request's user interrupt. In execlist mode the corresponding context
completed interrupt can be delayed though and until this latter
interrupt arrives we consider the request to be pending on the ELSP
submit port. This can cause a problem during system suspend where this
last request will be seen by the resume code as still pending. Such
pending requests are normally replayed after a GPU reset, but during
resume we reset both SW and HW tracking of the ring head/tail pointers,
so replaying the pending request with its stale tail pointer will leave
the ring in an inconsistent state. A subsequent request submission can
lead then to the GPU executing from uninitialized area in the ring
behind the above stale tail pointer.

Fix this by making sure any pending request on the ELSP port is
completed before suspending. I used a polling wait since the completion
time I measured was <1ms and since normally we only need to wait during
system suspend. GPU idling during runtime suspend is scheduled with a
delay (currently 50-100ms) after the retirement of the last request at
which point the context completed interrupt must have arrived already.

The chance of this bug was increased by

commit 1c777c5d1dcdf8fa0223fcff35fb387b5bb9517a
Author: Imre Deak <imre.deak@intel.com>
Date:   Wed Oct 12 17:46:37 2016 +0300

    drm/i915/hsw: Fix GPU hang during resume from S3-devices state

but it could happen even without the explicit GPU reset, since we
disable interrupts afterwards during the suspend sequence.

v2:
- Do an unlocked poll-wait first. (Chris)
v3-4:
- s/intel_lr_engines_idle/intel_execlists_idle/ and move
  i915.enable_execlists check to the new helper. (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98470
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-3-git-send-email-imre.deak@intel.com

drm/i915: Avoid early GPU idling due to race with new request

There is a small race where a new request can be submitted and retired
after the idle worker started to run which leads to idling the GPU too
early. Fix this by deferring the idling to the pending instance of the
worker.

This scenario was pointed out by Chris.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-2-git-send-email-imre.deak@intel.com

drm/i915: Avoid early GPU idling due to already pending idle work

Atm, in case an idle work handler is already pending but haven't yet
started to run, retiring a new request will not extend the active period
as required, rather simply leaves the pending idle work to be scheduled
at the original expiration time. This may lead to idling the GPU too
early. Fix this by using the delayed-work scheduler alternative which
makes sure the handler's expiration time is extended in this case.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Requested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-1-git-send-email-imre.deak@intel.com

drm/i915: Limit Valleyview and earlier to only using mappable scanout

Valleyview appears to be limited to only scanning out from the first 512MiB
of the Global GTT. Lets presume that this behaviour was inherited from the
display block copied from g4x (not Ironlake) and all earlier generations
are similarly affected, though testing suggests different symptoms. For
simplicity, impose that these platforms must scanout from the mappable
region. (For extra simplicity, use HAS_GMCH_DISPLAY even though this
catches Cherryview which does not appear to be limited to the low
aperture for its scanout.)

v2: Use HAS_GMCH_DISPLAY() to more clearly convey my intent about
limiting this workaround to the old style of display engine.

v3: Update changelog to reflect testing by Ville Syrjälä
v4: Include the changes to the comments as well

Reported-by: Luis Botello <luis.botello.ortega@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98036
Fixes: 2efb813d5388 ("drm/i915: Fallback to using unmappable memory for scanout")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107110128.28762-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com

drm/i915: Round tile chunks up for constructing partial VMAs

When we split a large object up into chunks for GTT faulting (because we
can't fit the whole object into the aperture) we have to align our cuts
with the fence registers. Each partial VMA must cover a complete set of
tile rows or the offset into each partial VMA is not aligned with the
whole image. Currently we enforce a minimum size on each partial VMA,
but this minimum size itself was not aligned to the tile row causing
distortion.

Reported-by: Andreas Reis <andreas.reis@gmail.com>
Reported-by: Chris Clayton <chris2553@googlemail.com>
Reported-by: Norbert Preining <preining@logic.at>
Tested-by: Norbert Preining <preining@logic.at>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Fixes: 03af84fe7f48 ("drm/i915: Choose partial chunksize based on tile row size")
Fixes: a61007a83a46 ("drm/i915: Fix partial GGTT faulting") # enabling patch
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98402
Testcase: igt/gem_mmap_gtt/medium-copy-odd
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107105443.27855-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Remove the vma from the object list upon close

Currently, the vma is being unlink from the object lookup on destroy.
However, we are meant to be decoupling it upon close so that the user
cannot access the closed vma whilst it remains active on the GPU.

[   34.074858] kernel BUG at drivers/gpu/drm/i915/i915_gem_gtt.c:3561!
[   34.074875] invalid opcode: 0000 [#1] PREEMPT SMP
[   34.074888] Modules linked in: snd_hda_intel i915 x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel lpc_ich mei_me mei snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_codec snd_hwdep snd_hda_core i2c_designware_platform i2c_designware_core snd_pcm e1000e ptp pps_core sdhci_acpi sdhci mmc_core i2c_hid [last unloaded: i915]
[   34.075010] CPU: 1 PID: 6224 Comm: gem_close_race Tainted: G     U          4.9.0-rc3-CI-CI_DRM_1800+ #1
[   34.075034] Hardware name:                  /NUC5i7RYB, BIOS RYBDWi35.86A.0355.2016.0224.1501 02/24/2016
[   34.075057] task: ffff8802459a8040 task.stack: ffffc90000524000
[   34.075074] RIP: 0010:[<ffffffffa0392cbc>]  [<ffffffffa0392cbc>] i915_gem_obj_lookup_or_create_vma+0x8c/0xc0 [i915]
[   34.075118] RSP: 0018:ffffc90000527b68  EFLAGS: 00010202
[   34.075135] RAX: ffff8802426c5e40 RBX: 0000000000000000 RCX: ffff8802447fc2a8
[   34.075158] RDX: 0000000000000000 RSI: ffff8802447fc2a8 RDI: ffff880248a4a880
[   34.075181] RBP: ffffc90000527b88 R08: 0000000000000008 R09: 0000000000000000
[   34.075203] R10: 0000000000000001 R11: 0000000000000000 R12: ffff880248a4a880
[   34.075225] R13: ffff8802447fc2a8 R14: ffff880243e9afa8 R15: ffff880248a4a9c8
[   34.075248] FS:  00007f9b43e59740(0000) GS:ffff880256c80000(0000) knlGS:0000000000000000
[   34.075273] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   34.075292] CR2: 00007f9b43419140 CR3: 000000024455d000 CR4: 00000000003406e0
[   34.075314] Stack:
[   34.075323]  0000000000000000 ffffc90000527bd0 ffff880243cb8008 ffff880243e9afa8
[   34.075353]  ffffc90000527c08 ffffffffa03874c7 ffffc90000527bb8 ffff880243e9afa8
[   34.075383]  ffff880243e9afb0 ffffc90000527e10 ffff8802447fc2a8 ffff880243cb8040
[   34.075414] Call Trace:
[   34.075435]  [<ffffffffa03874c7>] eb_lookup_vmas.isra.7+0x247/0x330 [i915]
[   34.075468]  [<ffffffffa0388c34>] i915_gem_do_execbuffer.isra.15+0x604/0x1a10 [i915]
[   34.075507]  [<ffffffffa039c957>] ? i915_gem_object_get_sg+0x347/0x380 [i915]
[   34.075532]  [<ffffffff811a69ce>] ? __might_fault+0x3e/0x90
[   34.075562]  [<ffffffffa038a430>] i915_gem_execbuffer2+0xc0/0x250 [i915]
[   34.075585]  [<ffffffff81552926>] drm_ioctl+0x1f6/0x480
[   34.075604]  [<ffffffff8100107a>] ? trace_hardirqs_on_thunk+0x1a/0x1c
[   34.075635]  [<ffffffffa038a370>] ? i915_gem_execbuffer+0x330/0x330 [i915]
[   34.075658]  [<ffffffff81202d2e>] do_vfs_ioctl+0x8e/0x690
[   34.075677]  [<ffffffff8181582d>] ? _raw_spin_unlock_irqrestore+0x3d/0x60
[   34.075700]  [<ffffffff810fcd51>] ? SyS_timer_settime+0x141/0x1e0
[   34.075721]  [<ffffffff810d6de2>] ? trace_hardirqs_on_caller+0x122/0x1b0
[   34.075742]  [<ffffffff8120336c>] SyS_ioctl+0x3c/0x70
[   34.075760]  [<ffffffff8181602e>] entry_SYSCALL_64_fastpath+0x1c/0xb1
[   34.075781] Code: 44 a0 48 c7 c2 9a 7e 43 a0 be e0 0d 00 00 48 c7 c7 a0 45 44 a0 e8 55 b8 ce e0 48 85 db 74 a3 49 83 bd f8 03 00 00 00 74 99 0f 0b <0f> 0b 48 89 da 4c 89 ee 4c 89 e7 e8 04 a9 ff ff 48 89 da 49 89
[   34.075955] RIP  [<ffffffffa0392cbc>] i915_gem_obj_lookup_or_create_vma+0x8c/0xc0 [i915]
[   34.075994]  RSP <ffffc90000527b68>

Testcase: igt/gem_close_race/basic-threads
Fixes: db6c2b4151f2 ("drm/i915: Store the vma in an rbtree...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161104161241.25871-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Merge branch 'linux-4.10' of git://github.com/skeggsb/linux into drm-next

- Initial atomic modesetting support.  Used for "legacy" KMS interfaces,
ioctl not exposed by default, but there is a commandline option to
enable it.
- Initial DP 1.2 MST support
- Misc other code cleanups + fixes

* 'linux-4.10' of git://github.com/skeggsb/linux: (64 commits)
  drm/nouveau/fifo/gf100-: protect channel preempt with subdev mutex
  drm/nouveau/gr: fallback to legacy paths during firmware lookup
  drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream
  drm/nouveau/kms/nv50: allow encoder update to be called from other modules
  drm/nouveau/kms/nv50: rename remaining nv50_crtc to nv50_head
  drm/nouveau/kms/nv50: remove code to create ctxdma for every framebuffer
  drm/nouveau/kms/nv50: remove code to support non-atomic page flips
  drm/nouveau/kms/nv50: remove code to support non-atomic connector properties
  drm/nouveau/kms/nv50: remove code to support non-atomic dpms
  drm/nouveau/kms/nv50: remove code to support non-atomic modesets
  drm/nouveau/kms/nv50: transition to atomic interfaces internally
  drm/nouveau/kms/nv50: turn mode_set_base_atomic() into a stub
  drm/nouveau/kms/nv50: convert encoder mode_fixup into an atomic_check()
  drm/nouveau/kms/nv50: clean-up encoder functions
  drm/nouveau/kms/nv50: ensure encoder normal power state is enabled at startup
  drm/nouveau/kms/nv50: prepare ctxdma interface to be usable with atomic
  drm/nouveau/kms/nv50: separate out cursor channel commit
  drm/nouveau/kms/nv50: separate out base channel commit
  drm/nouveau/kms/nv50: separate out vblank dmi commit
  drm/nouveau/kms/nv50: separate out procamp commit
  ...

drm/nouveau/fifo/gf100-: protect channel preempt with subdev mutex

This avoids an issue that occurs when we're attempting to preempt multiple
channels simultaneously.  HW seems to ignore preempt requests while it's
still processing a previous one, which, well, makes sense.

Fixes random "fifo: SCHED_ERROR 0d []" + GPCCS page faults during parallel
piglit runs on (at least) GM107.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

drm/nouveau/gr: fallback to legacy paths during firmware lookup

Look for firmware files using the legacy ("nouveau/nvxx_fucxxxx") path
if they cannot be found in the new, "official" path. User setups were
broken by the switch, which is bad.

There are only 4 firmware files we may want to look up that way, so
hardcode them into the lookup function. All new firmware files should
use the standard "nvidia/<chip>/gr/" path.

Fixes: 8539b37acef7 ("drm/nouveau/gr: use NVIDIA-provided external firmwares")
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50: allow encoder update to be called from other modules

MST encoders will make use of this to share code with SOR>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50: rename remaining nv50_crtc to nv50_head

No code changes, just renames + shuffles.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50: remove code to create ctxdma for every framebuffer

This is now handled by prepare_fb().  Legacy flips were the last user.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50: remove code to support non-atomic page flips

Made completely unreachable (and broken) by atomic commits.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50: remove code to support non-atomic connector properties

Made completely unreachable by atomic commits.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/kms/nv50: remove code to support non-atomic dpms

Made completely unreachable (and broken) by atomic commits.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>