james qian wang (Arm Technology China) [Wed, 5 Jun 2019 10:35:32 +0000 (11:35 +0100)]
drm/komeda: Unify mclk/pclk/pipeline->aclk to one MCLK
Current komeda driver uses three dedicated clks for a specific purpose:
- mclk: main engine clock
- pclk: APB clock
- pipeline->aclk: AXI clock.
But per spec the komeda HW only has three input clks:
- ACLK: used for AXI masters, APB slave and most pipeline processing
- PXCLK for pipeline 0: output pixel clock for pipeline 0
- PXCLK for pipeline 1: output pixel clock for pipeline 1
So one ACLK is enough, no need to split it to three mclk/pclk/axiclk.
drop pclk/pipeline->axiclk. but only keep one mclk in komeda driver.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Lowry Li (Arm Technology China) [Mon, 20 May 2019 03:33:19 +0000 (04:33 +0100)]
drm/komeda: Adds zorder support
- Creates the zpos property.
- Implement komeda_crtc_normalize_zpos to replace
drm_atomic_normalize_zpos, reasons as the following:
1. The drm_atomic_normalize_zpos allows to configure same zpos for
different planes, but komeda doesn't support such configuration.
2. For further slave pipline case, Komeda need to calculate the
max_slave_zorder, we will merge such calculation into
komed_crtc_normalize_zpos to save a separated plane_state loop.
3. For feature none-scaling layer_split, which a plane_state will be
assigned to two individual layers(left/right), which requires two
normalize_zpos for this plane, plane_st->normalize_zpos will be used
by left layer, normalize_zpos + 1 for right_layer.
This patch series depends on:
- https://patchwork.freedesktop.org/series/58710/
- https://patchwork.freedesktop.org/series/59000/
- https://patchwork.freedesktop.org/series/59002/
- https://patchwork.freedesktop.org/series/59747/
- https://patchwork.freedesktop.org/series/59915/
- https://patchwork.freedesktop.org/series/60083/
- https://patchwork.freedesktop.org/series/60698/
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
james qian wang (Arm Technology China) [Fri, 17 May 2019 10:05:13 +0000 (11:05 +0100)]
drm/komeda: Add format support for Y0L2, P010, YUV420_8/10BIT
- Y0L2 and P010 are block (tiled) format, Update the kemeda logic to
compatible with such block format.
- Since DRM introduced a general block information to drm_format_info,
the format_caps->tiled_size no long needed, delete it.
- Build some fb utils functions for code sharing.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
james qian wang (Arm Technology China) [Fri, 17 May 2019 10:05:06 +0000 (11:05 +0100)]
drm/komeda: Add komeda_fb_check_src_coords
Add komeda_fb_check_src_coords and check if the layer configured src
rect can meet the requirement of fb and fb format.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Lowry Li (Arm Technology China) [Thu, 6 Jun 2019 09:53:10 +0000 (10:53 +0100)]
dt/bindings: drm/komeda: Adds SMMU support for D71 devicetree
Updates the device-tree doc about how to enable SMMU by devicetree.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Lowry Li (Arm Technology China) [Thu, 6 Jun 2019 09:53:05 +0000 (10:53 +0100)]
drm/komeda: Adds SMMU support
Adds iommu_connect and disconnect for SMMU support, and configures
TBU translation once SMMU has been attached to the display device.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
[fixed checking of error code returned by dp_wait_cond() and removed
extraneous DRM_ERROR() calls]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Lowry Li (Arm Technology China) [Thu, 16 May 2019 06:13:13 +0000 (07:13 +0100)]
drm/komeda: Enable color-encoding (YUV format) support
Adds color-encoding properties if layer can support YUV format.
Updates HW YUV-RGB matrix state according to the color-encoding
properties.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Lowry Li (Arm Technology China) [Thu, 16 May 2019 06:13:09 +0000 (07:13 +0100)]
drm/komeda: Update HW up-sampling on D71
Updates HW up-sampling method according to the format type.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Lowry Li (Arm Technology China) [Mon, 22 Apr 2019 03:16:30 +0000 (04:16 +0100)]
drm/komeda: Adds limitation check for AFBC wide block not support Rot90
Komeda series hardware doesn't support Rot90 for AFBC wide block. So
add limitation check to reject it if such configuration has been posted.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Lowry Li (Arm Technology China) [Mon, 22 Apr 2019 03:16:26 +0000 (04:16 +0100)]
drm/komeda: Add rotation support on Komeda driver
- Adds rotation property to plane.
- Komeda display rotation support diverges from the specific formats,
so need to check the user required rotation type with the format caps
and reject the commit if it can not be supported.
- In the layer validate flow, sets the rotation value to the layer
state. If r90 or r270, swap the width and height of the data flow
for next stage.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Lowry Li (Arm Technology China) [Wed, 15 May 2019 03:02:05 +0000 (04:02 +0100)]
drm/komeda: Clear enable bit in CU_INPUTx_CONTROL
Besides clearing the input ID to zero, D71 compiz also has input
enable bit in CU_INPUTx_CONTROL which need to be cleared.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Liviu Dudau [Wed, 5 Jun 2019 10:48:01 +0000 (11:48 +0100)]
arm/komeda: Convert dp_wait_cond() to return an error code.
dp_wait_cond() currently returns the number of retries left over which
is hardly an useful information. Convert to returning -ETIMEDOUT when
the wait times out, or 0 (zero) when condition is met before deadline.
Also convert the users of the function to return the error value.
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Lowry Li (Arm Technology China) [Fri, 24 May 2019 09:20:24 +0000 (10:20 +0100)]
drm/komeda: Creates plane alpha and blend mode properties
Creates plane alpha and blend mode properties attached to plane.
This patch depends on:
- https://patchwork.freedesktop.org/series/59915/
- https://patchwork.freedesktop.org/series/58665/
- https://patchwork.freedesktop.org/series/59000/
- https://patchwork.freedesktop.org/series/59002/
- https://patchwork.freedesktop.org/series/59471/
Changes since v1:
- Adds patch denpendency in the comment
Changes since v2:
- Remove [RFC] from the subject
Changes since v3:
- Rebase the code
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
james qian wang (Arm Technology China) [Thu, 23 May 2019 11:10:27 +0000 (12:10 +0100)]
drm/komeda: Add image enhancement support
Besides scaling, Arm display scaler also can support image enhancement.
For support it, Add a new property "img_enhancement" to plane, then user
can turn on/off it by this property, and kernel follow user's requirement
to maitain the state and enable/disable the real HW image enhancement.
v2: Rebase and rename "needs_img_enhancement" to "en_img_enhancement"
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
james qian wang (Arm Technology China) [Thu, 23 May 2019 11:10:21 +0000 (12:10 +0100)]
drm/komeda: Add engine clock requirement check for the downscaling
For downscaling there is a restriction, the downscaling needed engine
clock can not acceed the real engine clock, and the clock requirement
mostly depend on the specific HW, to solve this problem:
1. Add a pipeline func - downscaling_clk_check for CORE to query the real
HW if downscaling can be supported.
2. Add new property clock ratio which is the ratio of:
(mclk << 32) / pxlclk
then User driver can use this ratio to do the clock check to avoid post
an invalid downscaling to kernel.
v2: Rebase and Delete debug print
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
james qian wang (Arm Technology China) [Thu, 23 May 2019 11:10:15 +0000 (12:10 +0100)]
drm/komeda: Add writeback scaling support
1. Add scaler to writeback pipeline to enable the writeback scaling support
2. Display HW can not do upscaling for writeback, check it when validate.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
james qian wang (Arm Technology China) [Thu, 23 May 2019 11:10:09 +0000 (12:10 +0100)]
drm/komeda: Implement D71 scaler support
1. Add scaler component and initialize it according to D71 HW.
2. Implement d71_scaler_update/disable/dump
v2:
- Correct a typo
- Constify component_funcs: d71_scaler_funcs
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
james qian wang (Arm Technology China) [Thu, 23 May 2019 11:10:03 +0000 (12:10 +0100)]
drm/komeda: Add the initial scaler support for CORE
This patch add the initial and necessary logic for CORE to support scaler:
- Complete the struct komeda_scaler and komeda_scaler_state for adding
the scaler specific features and capablities.
- Implement komeda_scaler_validate to check the scaler with the data flow
configurations.
- Enable scaling support for plane input path (layer input data flow).
v2: Fix a typo, and rename "needs_scaling" to "en_scaling"
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
james qian wang (Arm Technology China) [Thu, 23 May 2019 11:09:57 +0000 (12:09 +0100)]
drm/komeda: Attach scaler to drm as private object
According to the komeda pipeline configuration, attach scaler to drm as
private object.
v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
james qian wang (Arm Technology China) [Thu, 23 May 2019 09:56:54 +0000 (10:56 +0100)]
drm/komeda: Added AFBC support for komeda driver
For supporting AFBC:
1. Check if the user requested modifier can be supported by display HW.
2. Check the obj->size with AFBC's requirement.
3. Configure HW according to the modifier (afbc features)
This patch depends on:
- https://patchwork.freedesktop.org/series/59915/
- https://patchwork.freedesktop.org/series/59000/
v2: Rebase and addressed Ayan's comments
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
james qian wang (Arm Technology China) [Thu, 23 May 2019 09:36:38 +0000 (10:36 +0100)]
drm/komeda: Add writeback support
Komeda driver uses a individual component to describe the HW's writeback
caps, but drivers doesn't define a new structure and still uses the
existing "struct komeda_layer" to describe this new component.
The detailed changes as follow:
1. Initialize wb_layer according to HW and report it to CORE.
2. CORE exposes wb_layer as a resource to KMS by private_obj.
3. Report writeback supporting by add a wb_connector to KMS, and then
wb_connector will take act as a component resources user,
so the func komeda_wb_encoder_atomic_check claims komeda resources
(scaler and wb_layer) accroding to its state configuration to the
wb_connector. and the wb_state configuration will be validated on the
specific component resources to see if the caps of component can
meet the requirement of wb_connector. if not check failed.
4. Update irq_handler to notify the completion of writeback.
NOTE:
This change doesn't add scaling writeback support, that support will
be added in the future after the scaler support.
v2: Rebase
v3: Rebase and constify the d71_wb_layer_funcs
v4: Addressed Ayan's comments
Depends on:
- https://patchwork.freedesktop.org/series/59915/
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Ayan Kumar Halder <ayan.halder@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Daniel Vetter [Wed, 19 Jun 2019 10:04:55 +0000 (12:04 +0200)]
Merge v5.2-rc5 into drm-next
Maarten needs -rc4 backmerged so he can pull in the fbcon notifier
removal topic branch into drm-misc-next.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Linus Torvalds [Sun, 16 Jun 2019 18:49:45 +0000 (08:49 -1000)]
Linux 5.2-rc5
Linus Torvalds [Sun, 16 Jun 2019 17:28:14 +0000 (07:28 -1000)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"The accumulated fixes from this and last week:
- Fix vmalloc TLB flush and map range calculations which lead to
stale TLBs, spurious faults and other hard to diagnose issues.
- Use fault_in_pages_writable() for prefaulting the user stack in the
FPU code as it's less fragile than the current solution
- Use the PF_KTHREAD flag when checking for a kernel thread instead
of current->mm as the latter can give the wrong answer due to
use_mm()
- Compute the vmemmap size correctly for KASLR and 5-Level paging.
Otherwise this can end up with a way too small vmemmap area.
- Make KASAN and 5-level paging work again by making sure that all
invalid bits are masked out when computing the P4D offset. This
worked before but got broken recently when the LDT remap area was
moved.
- Prevent a NULL pointer dereference in the resource control code
which can be triggered with certain mount options when the
requested resource is not available.
- Enforce ordering of microcode loading vs. perf initialization on
secondary CPUs. Otherwise perf tries to access a non-existing MSR
as the boot CPU marked it as available.
- Don't stop the resource control group walk early otherwise the
control bitmaps are not updated correctly and become inconsistent.
- Unbreak kgdb by returning 0 on success from
kgdb_arch_set_breakpoint() instead of an error code.
- Add more Icelake CPU model defines so depending changes can be
queued in other trees"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback
x86/kasan: Fix boot with 5-level paging and KASAN
x86/fpu: Don't use current->mm to check for a kthread
x86/kgdb: Return 0 from kgdb_arch_set_breakpoint()
x86/resctrl: Prevent NULL pointer dereference when local MBM is disabled
x86/resctrl: Don't stop walking closids when a locksetup group is found
x86/fpu: Update kernel's FPU state before using for the fsave header
x86/mm/KASLR: Compute the size of the vmemmap section properly
x86/fpu: Use fault_in_pages_writeable() for pre-faulting
x86/CPU: Add more Icelake model numbers
mm/vmalloc: Avoid rare case of flushing TLB with weird arguments
mm/vmalloc: Fix calculation of direct map addr range
Linus Torvalds [Sun, 16 Jun 2019 17:22:56 +0000 (07:22 -1000)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A set of small fixes:
- Repair the ktime_get_coarse() functions so they actually deliver
what they are supposed to: tick granular time stamps. The current
code missed to add the accumulated nanoseconds part of the
timekeeper so the resulting granularity was 1 second.
- Prevent the tracer from infinitely recursing into time getter
functions in the arm architectured timer by marking these functions
notrace
- Fix a trivial compiler warning caused by wrong qualifier ordering"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Repair ktime_get_coarse*() granularity
clocksource/drivers/arm_arch_timer: Don't trace count reader functions
clocksource/drivers/timer-ti-dm: Change to new style declaration
Linus Torvalds [Sun, 16 Jun 2019 17:19:15 +0000 (07:19 -1000)]
Merge branch 'ras-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RAS fixes from Thomas Gleixner:
"Two small fixes for RAS:
- Use a proper search algorithm to find the correct element in the
CEC array. The replacement was a better choice than fixing the
crash causes by the original search function with horrible duct
tape.
- Move the timer based decay function into thread context so it can
actually acquire the mutex which protects the CEC array to prevent
corruption"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
RAS/CEC: Convert the timer callback to a workqueue
RAS/CEC: Fix binary search function
Linus Torvalds [Sat, 15 Jun 2019 17:38:54 +0000 (07:38 -1000)]
Merge tag 'platform-drivers-x86-v5.2-3' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Andy Shevchenko:
- fix a couple of Mellanox driver enumeration issues
- fix ASUS laptop regression with backlight
- fix Dell computers that got a wrong mode (tablet versus laptop) after
resume
* tag 'platform-drivers-x86-v5.2-3' of git://git.infradead.org/linux-platform-drivers-x86:
platform/mellanox: mlxreg-hotplug: Add devm_free_irq call to remove flow
platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registration
platform/x86: intel-vbtn: Report switch events when event wakes device
platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from asus_nb_wmi
Linus Torvalds [Sat, 15 Jun 2019 17:34:23 +0000 (07:34 -1000)]
Merge tag 'usb-5.2-rc5' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.2-rc5
Nothing major, just some small gadget fixes, usb-serial new device
ids, a few new quirks, and some small fixes for some regressions that
have been found after the big 5.2-rc1 merge.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: Make sure an alt mode exist before getting its partner
usb: gadget: udc: lpc32xx: fix return value check in lpc32xx_udc_probe()
usb: gadget: dwc2: fix zlp handling
usb: dwc2: Set actual frame number for completed ISOC transfer for none DDMA
usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC
usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i]
usb: phy: mxs: Disable external charger detect in mxs_phy_hw_init()
usb: dwc2: Fix DMA cache alignment issues
usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression)
USB: Fix chipmunk-like voice when using Logitech C270 for recording audio.
USB: usb-storage: Add new ID to ums-realtek
usb: typec: ucsi: ccg: fix memory leak in do_flash
USB: serial: option: add Telit 0x1260 and 0x1261 compositions
USB: serial: pl2303: add Allied Telesis VT-Kit3
USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode
Linus Torvalds [Sat, 15 Jun 2019 17:29:32 +0000 (07:29 -1000)]
Merge tag 'powerpc-5.2-4' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix for a regression introduced by our 32-bit KASAN support, which
broke booting on machines with "bootx" early debugging enabled.
A fix for a bug which broke kexec on 32-bit, introduced by changes to
the 32-bit STRICT_KERNEL_RWX support in v5.1.
Finally two fixes going to stable for our THP split/collapse handling,
discovered by Nick. The first fixes random crashes and/or corruption
in guests under sufficient load.
Thanks to: Nicholas Piggin, Christophe Leroy, Aaro Koskinen, Mathieu
Malaterre"
* tag 'powerpc-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32s: fix booting with CONFIG_PPC_EARLY_DEBUG_BOOTX
powerpc/64s: __find_linux_pte() synchronization vs pmdp_invalidate()
powerpc/64s: Fix THP PMD collapse serialisation
powerpc: Fix kexec failure on book3s/32
Linus Torvalds [Sat, 15 Jun 2019 17:24:11 +0000 (07:24 -1000)]
Merge tag 'trace-v5.2-rc4' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Out of range read of stack trace output
- Fix for NULL pointer dereference in trace_uprobe_create()
- Fix to a livepatching / ftrace permission race in the module code
- Fix for NULL pointer dereference in free_ftrace_func_mapper()
- A couple of build warning clean ups
* tag 'trace-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper()
module: Fix livepatch/ftrace module text permissions race
tracing/uprobe: Fix obsolete comment on trace_uprobe_create()
tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create()
tracing: Make two symbols static
tracing: avoid build warning with HAVE_NOP_MCOUNT
tracing: Fix out-of-range read in trace_stack_print()
Borislav Petkov [Thu, 13 Jun 2019 13:49:02 +0000 (15:49 +0200)]
x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback
Adric Blake reported the following warning during suspend-resume:
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0000000000000000) \
at rIP: 0xffffffff8d267924 (native_write_msr+0x4/0x20)
Call Trace:
intel_set_tfa
intel_pmu_cpu_starting
? x86_pmu_dead_cpu
x86_pmu_starting_cpu
cpuhp_invoke_callback
? _raw_spin_lock_irqsave
notify_cpu_starting
start_secondary
secondary_startup_64
microcode: sig=0x806ea, pf=0x80, revision=0x96
microcode: updated to revision 0xb4, date = 2019-04-01
CPU1 is up
The MSR in question is MSR_TFA_RTM_FORCE_ABORT and that MSR is emulated
by microcode. The log above shows that the microcode loader callback
happens after the PMU restoration, leading to the conjecture that
because the microcode hasn't been updated yet, that MSR is not present
yet, leading to the #GP.
Add a microcode loader-specific hotplug vector which comes before
the PERF vectors and thus executes earlier and makes sure the MSR is
present.
Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort")
Reported-by: Adric Blake <promarbler14@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: x86@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203637
Linus Torvalds [Sat, 15 Jun 2019 03:46:14 +0000 (17:46 -1000)]
Merge branch 'for-5.2-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"This has an unusually high density of tricky fixes:
- task_get_css() could deadlock when it races against a dying cgroup.
- cgroup.procs didn't list thread group leaders with live threads.
This could mislead readers to think that a cgroup is empty when
it's not. Fixed by making PROCS iterator include dead tasks. I made
a couple mistakes making this change and this pull request contains
a couple follow-up patches.
- When cpusets run out of online cpus, it updates cpusmasks of member
tasks in bizarre ways. Joel improved the behavior significantly"
* 'for-5.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: restore sanity to cpuset_cpus_allowed_fallback()
cgroup: Fix css_task_iter_advance_css_set() cset skip condition
cgroup: css_task_iter_skip()'d iterators must be advanced before accessed
cgroup: Include dying leaders with live threads in PROCS iterations
cgroup: Implement css_task_iter_skip()
cgroup: Call cgroup_release() before __exit_signal()
docs cgroups: add another example size for hugetlb
cgroup: Use css_tryget() instead of css_tryget_online() in task_get_css()
Linus Torvalds [Sat, 15 Jun 2019 03:34:45 +0000 (17:34 -1000)]
Merge tag 'drm-fixes-2019-06-14' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Nothing unsettling here, also not aware of anything serious still
pending.
The edid override regression fix took a bit longer since this seems to
be an area with an overabundance of bad options. But the fix we have
now seems like a good path forward.
Next week it should be back to Dave.
Summary:
- fix regression on amdgpu on SI
- fix edid override regression
- driver fixes: amdgpu, i915, mediatek, meson, panfrost
- fix writecombine for vmap in gem-shmem helper (used by panfrost)
- add more panel quirks"
* tag 'drm-fixes-2019-06-14' of git://anongit.freedesktop.org/drm/drm: (25 commits)
drm/amdgpu: return 0 by default in amdgpu_pm_load_smu_firmware
drm/amdgpu: Fix bounds checking in amdgpu_ras_is_supported()
drm: add fallback override/firmware EDID modes workaround
drm/edid: abstract override/firmware EDID retrieval
drm/i915/perf: fix whitelist on Gen10+
drm/i915/sdvo: Implement proper HDMI audio support for SDVO
drm/i915: Fix per-pixel alpha with CCS
drm/i915/dmc: protect against reading random memory
drm/i915/dsi: Use a fuzzy check for burst mode clock check
drm/amdgpu/{uvd,vcn}: fetch ring's read_ptr after alloc
drm/panfrost: Require the simple_ondemand governor
drm/panfrost: make devfreq optional again
drm/gem_shmem: Use a writecombine mapping for ->vaddr
drm: panel-orientation-quirks: Add quirk for GPD MicroPC
drm: panel-orientation-quirks: Add quirk for GPD pocket2
drm/meson: fix G12A primary plane disabling
drm/meson: fix primary plane disabling
drm/meson: fix G12A HDMI PLL settings for 4K60 1000/1001 variations
drm/mediatek: call mtk_dsi_stop() after mtk_drm_crtc_atomic_disable()
drm/mediatek: clear num_pipes when unbind driver
...
Linus Torvalds [Sat, 15 Jun 2019 03:27:12 +0000 (17:27 -1000)]
Merge tag 'gfs2-v5.2.fixes2' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Andreas Gruenbacher:
"Fix rounding error in gfs2_iomap_page_prepare"
* tag 'gfs2-v5.2.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix rounding error in gfs2_iomap_page_prepare
Linus Torvalds [Sat, 15 Jun 2019 01:52:51 +0000 (15:52 -1000)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"A single bug fix for hpsa.
The user visible consequences aren't clear, but the ioaccel2 raid
acceleration may misfire on the malformed request assuming the payload
is big enough to require chaining (more than 31 sg entries)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hpsa: correct ioaccel2 chaining
Linus Torvalds [Sat, 15 Jun 2019 01:41:18 +0000 (15:41 -1000)]
Merge tag 'for-linus-
20190614' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Remove references to old schedulers for the scheduler switching and
blkio controller documentation (Andreas)
- Kill duplicate check for report zone for null_blk (Chaitanya)
- Two bcache fixes (Coly)
- Ensure that mq-deadline is selected if zoned block device is enabled,
as we need that to support them (Damien)
- Fix io_uring memory leak (Eric)
- ps3vram fallout from LBDAF removal (Geert)
- Redundant blk-mq debugfs debugfs_create return check cleanup (Greg)
- Extend NOPLM quirk for ST1000LM024 drives (Hans)
- Remove error path warning that can now trigger after the queue
removal/addition fixes (Ming)
* tag 'for-linus-
20190614' of git://git.kernel.dk/linux-block:
block/ps3vram: Use %llu to format sector_t after LBDAF removal
libata: Extend quirks for the ST1000LM024 drives with NOLPM quirk
bcache: only set BCACHE_DEV_WB_RUNNING when cached device attached
bcache: fix stack corruption by PRECEDING_KEY()
blk-mq: remove WARN_ON(!q->elevator) from blk_mq_sched_free_requests
blkio-controller.txt: Remove references to CFQ
block/switching-sched.txt: Update to blk-mq schedulers
null_blk: remove duplicate check for report zone
blk-mq: no need to check return value of debugfs_create functions
io_uring: fix memory leak of UNIX domain socket inode
block: force select mq-deadline for zoned block devices
Linus Torvalds [Sat, 15 Jun 2019 01:25:27 +0000 (15:25 -1000)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C has two simple but wanted driver fixes for you"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pca-platform: Fix GPIO lookup code
i2c: acorn: fix i2c warning
Casey Schaufler [Fri, 31 May 2019 10:53:33 +0000 (11:53 +0100)]
Smack: Restore the smackfsdef mount option and add missing prefixes
The 5.1 mount system rework changed the smackfsdef mount option to
smackfsdefault. This fixes the regression by making smackfsdef treated
the same way as smackfsdefault.
Also fix the smack_param_specs[] to have "smack" prefixes on all the
names. This isn't visible to a user unless they either:
(a) Try to mount a filesystem that's converted to the internal mount API
and that implements the ->parse_monolithic() context operation - and
only then if they call security_fs_context_parse_param() rather than
security_sb_eat_lsm_opts().
There are no examples of this upstream yet, but nfs will probably want
to do this for nfs2 or nfs3.
(b) Use fsconfig() to configure the filesystem - in which case
security_fs_context_parse_param() will be called.
This issue is that smack_sb_eat_lsm_opts() checks for the "smack" prefix
on the options, but smack_fs_context_parse_param() does not.
Fixes: c3300aaf95fb ("smack: get rid of match_token()")
Fixes: 2febd254adc4 ("smack: Implement filesystem context security hooks")
Cc: stable@vger.kernel.org
Reported-by: Jose Bollo <jose.bollo@iot.bzh>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wei Li [Thu, 6 Jun 2019 03:17:54 +0000 (11:17 +0800)]
ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper()
The mapper may be NULL when called from register_ftrace_function_probe()
with probe->data == NULL.
This issue can be reproduced as follow (it may be covered by compiler
optimization sometime):
/ # cat /sys/kernel/debug/tracing/set_ftrace_filter
#### all functions enabled ####
/ # echo foo_bar:dump > /sys/kernel/debug/tracing/set_ftrace_filter
[ 206.949100] Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
[ 206.952402] Mem abort info:
[ 206.952819] ESR = 0x96000006
[ 206.955326] Exception class = DABT (current EL), IL = 32 bits
[ 206.955844] SET = 0, FnV = 0
[ 206.956272] EA = 0, S1PTW = 0
[ 206.956652] Data abort info:
[ 206.957320] ISV = 0, ISS = 0x00000006
[ 206.959271] CM = 0, WnR = 0
[ 206.959938] user pgtable: 4k pages, 48-bit VAs, pgdp=
0000000419f3a000
[ 206.960483] [
0000000000000000] pgd=
0000000411a87003, pud=
0000000411a83003, pmd=
0000000000000000
[ 206.964953] Internal error: Oops:
96000006 [#1] SMP
[ 206.971122] Dumping ftrace buffer:
[ 206.973677] (ftrace buffer empty)
[ 206.975258] Modules linked in:
[ 206.976631] Process sh (pid: 281, stack limit = 0x(____ptrval____))
[ 206.978449] CPU: 10 PID: 281 Comm: sh Not tainted 5.2.0-rc1+ #17
[ 206.978955] Hardware name: linux,dummy-virt (DT)
[ 206.979883] pstate:
60000005 (nZCv daif -PAN -UAO)
[ 206.980499] pc : free_ftrace_func_mapper+0x2c/0x118
[ 206.980874] lr : ftrace_count_free+0x68/0x80
[ 206.982539] sp :
ffff0000182f3ab0
[ 206.983102] x29:
ffff0000182f3ab0 x28:
ffff8003d0ec1700
[ 206.983632] x27:
ffff000013054b40 x26:
0000000000000001
[ 206.984000] x25:
ffff00001385f000 x24:
0000000000000000
[ 206.984394] x23:
ffff000013453000 x22:
ffff000013054000
[ 206.984775] x21:
0000000000000000 x20:
ffff00001385fe28
[ 206.986575] x19:
ffff000013872c30 x18:
0000000000000000
[ 206.987111] x17:
0000000000000000 x16:
0000000000000000
[ 206.987491] x15:
ffffffffffffffb0 x14:
0000000000000000
[ 206.987850] x13:
000000000017430e x12:
0000000000000580
[ 206.988251] x11:
0000000000000000 x10:
cccccccccccccccc
[ 206.988740] x9 :
0000000000000000 x8 :
ffff000013917550
[ 206.990198] x7 :
ffff000012fac2e8 x6 :
ffff000012fac000
[ 206.991008] x5 :
ffff0000103da588 x4 :
0000000000000001
[ 206.991395] x3 :
0000000000000001 x2 :
ffff000013872a28
[ 206.991771] x1 :
0000000000000000 x0 :
0000000000000000
[ 206.992557] Call trace:
[ 206.993101] free_ftrace_func_mapper+0x2c/0x118
[ 206.994827] ftrace_count_free+0x68/0x80
[ 206.995238] release_probe+0xfc/0x1d0
[ 206.995555] register_ftrace_function_probe+0x4a8/0x868
[ 206.995923] ftrace_trace_probe_callback.isra.4+0xb8/0x180
[ 206.996330] ftrace_dump_callback+0x50/0x70
[ 206.996663] ftrace_regex_write.isra.29+0x290/0x3a8
[ 206.997157] ftrace_filter_write+0x44/0x60
[ 206.998971] __vfs_write+0x64/0xf0
[ 206.999285] vfs_write+0x14c/0x2f0
[ 206.999591] ksys_write+0xbc/0x1b0
[ 206.999888] __arm64_sys_write+0x3c/0x58
[ 207.000246] el0_svc_common.constprop.0+0x408/0x5f0
[ 207.000607] el0_svc_handler+0x144/0x1c8
[ 207.000916] el0_svc+0x8/0xc
[ 207.003699] Code:
aa0003f8 a9025bf5 aa0103f5 f946ea80 (
f9400303)
[ 207.008388] ---[ end trace
7b6d11b5f542bdf1 ]---
[ 207.010126] Kernel panic - not syncing: Fatal exception
[ 207.011322] SMP: stopping secondary CPUs
[ 207.013956] Dumping ftrace buffer:
[ 207.014595] (ftrace buffer empty)
[ 207.015632] Kernel Offset: disabled
[ 207.017187] CPU features: 0x002,
20006008
[ 207.017985] Memory Limit: none
[ 207.019825] ---[ end Kernel panic - not syncing: Fatal exception ]---
Link: http://lkml.kernel.org/r/20190606031754.10798-1-liwei391@huawei.com
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Josh Poimboeuf [Fri, 14 Jun 2019 01:07:22 +0000 (20:07 -0500)]
module: Fix livepatch/ftrace module text permissions race
It's possible for livepatch and ftrace to be toggling a module's text
permissions at the same time, resulting in the following panic:
BUG: unable to handle page fault for address:
ffffffffc005b1d9
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
PGD
3ea0c067 P4D
3ea0c067 PUD
3ea0e067 PMD
3cc13067 PTE
3b8a1061
Oops: 0003 [#1] PREEMPT SMP PTI
CPU: 1 PID: 453 Comm: insmod Tainted: G O K 5.2.0-rc1-
a188339ca5 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014
RIP: 0010:apply_relocate_add+0xbe/0x14c
Code: fa 0b 74 21 48 83 fa 18 74 38 48 83 fa 0a 75 40 eb 08 48 83 38 00 74 33 eb 53 83 38 00 75 4e 89 08 89 c8 eb 0a 83 38 00 75 43 <89> 08 48 63 c1 48 39 c8 74 2e eb 48 83 38 00 75 32 48 29 c1 89 08
RSP: 0018:
ffffb223c00dbb10 EFLAGS:
00010246
RAX:
ffffffffc005b1d9 RBX:
0000000000000000 RCX:
ffffffff8b200060
RDX:
000000000000000b RSI:
0000004b0000000b RDI:
ffff96bdfcd33000
RBP:
ffffb223c00dbb38 R08:
ffffffffc005d040 R09:
ffffffffc005c1f0
R10:
ffff96bdfcd33c40 R11:
ffff96bdfcd33b80 R12:
0000000000000018
R13:
ffffffffc005c1f0 R14:
ffffffffc005e708 R15:
ffffffff8b2fbc74
FS:
00007f5f447beba8(0000) GS:
ffff96bdff900000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffffffc005b1d9 CR3:
000000003cedc002 CR4:
0000000000360ea0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
klp_init_object_loaded+0x10f/0x219
? preempt_latency_start+0x21/0x57
klp_enable_patch+0x662/0x809
? virt_to_head_page+0x3a/0x3c
? kfree+0x8c/0x126
patch_init+0x2ed/0x1000 [livepatch_test02]
? 0xffffffffc0060000
do_one_initcall+0x9f/0x1c5
? kmem_cache_alloc_trace+0xc4/0xd4
? do_init_module+0x27/0x210
do_init_module+0x5f/0x210
load_module+0x1c41/0x2290
? fsnotify_path+0x3b/0x42
? strstarts+0x2b/0x2b
? kernel_read+0x58/0x65
__do_sys_finit_module+0x9f/0xc3
? __do_sys_finit_module+0x9f/0xc3
__x64_sys_finit_module+0x1a/0x1c
do_syscall_64+0x52/0x61
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The above panic occurs when loading two modules at the same time with
ftrace enabled, where at least one of the modules is a livepatch module:
CPU0 CPU1
klp_enable_patch()
klp_init_object_loaded()
module_disable_ro()
ftrace_module_enable()
ftrace_arch_code_modify_post_process()
set_all_modules_text_ro()
klp_write_object_relocations()
apply_relocate_add()
*patches read-only code* - BOOM
A similar race exists when toggling ftrace while loading a livepatch
module.
Fix it by ensuring that the livepatch and ftrace code patching
operations -- and their respective permissions changes -- are protected
by the text_mutex.
Link: http://lkml.kernel.org/r/ab43d56ab909469ac5d2520c5d944ad6d4abd476.1560474114.git.jpoimboe@redhat.com
Reported-by: Johannes Erdfelt <johannes@erdfelt.com>
Fixes: 444d13ff10fb ("modules: add ro_after_init support")
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Eiichi Tsukata [Fri, 14 Jun 2019 07:40:26 +0000 (16:40 +0900)]
tracing/uprobe: Fix obsolete comment on trace_uprobe_create()
Commit
0597c49c69d5 ("tracing/uprobes: Use dyn_event framework for
uprobe events") cleaned up the usage of trace_uprobe_create(), and the
function has been no longer used for removing uprobe/uretprobe.
Link: http://lkml.kernel.org/r/20190614074026.8045-2-devel@etsukata.com
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Eiichi Tsukata [Fri, 14 Jun 2019 07:40:25 +0000 (16:40 +0900)]
tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create()
Just like the case of commit
8b05a3a7503c ("tracing/kprobes: Fix NULL
pointer dereference in trace_kprobe_create()"), writing an incorrectly
formatted string to uprobe_events can trigger NULL pointer dereference.
Reporeducer:
# echo r > /sys/kernel/debug/tracing/uprobe_events
dmesg:
BUG: kernel NULL pointer dereference, address:
0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD
8000000079d12067 P4D
8000000079d12067 PUD
7b7ab067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 1903 Comm: bash Not tainted 5.2.0-rc3+ #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
RIP: 0010:strchr+0x0/0x30
Code: c0 eb 0d 84 c9 74 18 48 83 c0 01 48 39 d0 74 0f 0f b6 0c 07 3a 0c 06 74 ea 19 c0 83 c8 01 c3 31 c0 c3 0f 1f 84 00 00 00 00 00 <0f> b6 07 89 f2 40 38 f0 75 0e eb 13 0f b6 47 01 48 83 c
RSP: 0018:
ffffb55fc0403d10 EFLAGS:
00010293
RAX:
ffff993ffb793400 RBX:
0000000000000000 RCX:
ffffffffa4852625
RDX:
0000000000000000 RSI:
000000000000002f RDI:
0000000000000000
RBP:
ffffb55fc0403dd0 R08:
ffff993ffb793400 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000000
R13:
ffff993ff9cc1668 R14:
0000000000000001 R15:
0000000000000000
FS:
00007f30c5147700(0000) GS:
ffff993ffda00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000000 CR3:
000000007b628000 CR4:
00000000000006f0
Call Trace:
trace_uprobe_create+0xe6/0xb10
? __kmalloc_track_caller+0xe6/0x1c0
? __kmalloc+0xf0/0x1d0
? trace_uprobe_create+0xb10/0xb10
create_or_delete_trace_uprobe+0x35/0x90
? trace_uprobe_create+0xb10/0xb10
trace_run_command+0x9c/0xb0
trace_parse_run_command+0xf9/0x1eb
? probes_open+0x80/0x80
__vfs_write+0x43/0x90
vfs_write+0x14a/0x2a0
ksys_write+0xa2/0x170
do_syscall_64+0x7f/0x200
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Link: http://lkml.kernel.org/r/20190614074026.8045-1-devel@etsukata.com
Cc: stable@vger.kernel.org
Fixes: 0597c49c69d5 ("tracing/uprobes: Use dyn_event framework for uprobe events")
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
YueHaibing [Fri, 14 Jun 2019 15:32:10 +0000 (23:32 +0800)]
tracing: Make two symbols static
Fix sparse warnings:
kernel/trace/trace.c:6927:24: warning:
symbol 'get_tracing_log_err' was not declared. Should it be static?
kernel/trace/trace.c:8196:15: warning:
symbol 'trace_instance_dir' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20190614153210.24424-1-yuehaibing@huawei.com
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Vasily Gorbik [Wed, 5 Jun 2019 11:11:58 +0000 (13:11 +0200)]
tracing: avoid build warning with HAVE_NOP_MCOUNT
Selecting HAVE_NOP_MCOUNT enables -mnop-mcount (if gcc supports it)
and sets CC_USING_NOP_MCOUNT. Reuse __is_defined (which is suitable for
testing CC_USING_* defines) to avoid conditional compilation and fix
the following gcc 9 warning on s390:
kernel/trace/ftrace.c:2514:1: warning: ‘ftrace_code_disable’ defined
but not used [-Wunused-function]
Link: http://lkml.kernel.org/r/patch.git-1a82d13f33ac.your-ad-here.call-01559732716-ext-6629@work.hours
Fixes: 2f4df0017baed ("tracing: Add -mcount-nop option support")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Eiichi Tsukata [Mon, 10 Jun 2019 04:00:16 +0000 (13:00 +0900)]
tracing: Fix out-of-range read in trace_stack_print()
Puts range check before dereferencing the pointer.
Reproducer:
# echo stacktrace > trace_options
# echo 1 > events/enable
# cat trace > /dev/null
KASAN report:
==================================================================
BUG: KASAN: use-after-free in trace_stack_print+0x26b/0x2c0
Read of size 8 at addr
ffff888069d20000 by task cat/1953
CPU: 0 PID: 1953 Comm: cat Not tainted 5.2.0-rc3+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
Call Trace:
dump_stack+0x8a/0xce
print_address_description+0x60/0x224
? trace_stack_print+0x26b/0x2c0
? trace_stack_print+0x26b/0x2c0
__kasan_report.cold+0x1a/0x3e
? trace_stack_print+0x26b/0x2c0
kasan_report+0xe/0x20
trace_stack_print+0x26b/0x2c0
print_trace_line+0x6ea/0x14d0
? tracing_buffers_read+0x700/0x700
? trace_find_next_entry_inc+0x158/0x1d0
s_show+0xea/0x310
seq_read+0xaa7/0x10e0
? seq_escape+0x230/0x230
__vfs_read+0x7c/0x100
vfs_read+0x16c/0x3a0
ksys_read+0x121/0x240
? kernel_write+0x110/0x110
? perf_trace_sys_enter+0x8a0/0x8a0
? syscall_slow_exit_work+0xa9/0x410
do_syscall_64+0xb7/0x390
? prepare_exit_to_usermode+0x165/0x200
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f867681f910
Code: b6 fe ff ff 48 8d 3d 0f be 08 00 48 83 ec 08 e8 06 db 01 00 66 0f 1f 44 00 00 83 3d f9 2d 2c 00 00 75 10 b8 00 00 00 00 04
RSP: 002b:
00007ffdabf23488 EFLAGS:
00000246 ORIG_RAX:
0000000000000000
RAX:
ffffffffffffffda RBX:
0000000000020000 RCX:
00007f867681f910
RDX:
0000000000020000 RSI:
00007f8676cde000 RDI:
0000000000000003
RBP:
00007f8676cde000 R08:
ffffffffffffffff R09:
0000000000000000
R10:
0000000000000871 R11:
0000000000000246 R12:
00007f8676cde000
R13:
0000000000000003 R14:
0000000000020000 R15:
0000000000000ec0
Allocated by task 1214:
save_stack+0x1b/0x80
__kasan_kmalloc.constprop.0+0xc2/0xd0
kmem_cache_alloc+0xaf/0x1a0
getname_flags+0xd2/0x5b0
do_sys_open+0x277/0x5a0
do_syscall_64+0xb7/0x390
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 1214:
save_stack+0x1b/0x80
__kasan_slab_free+0x12c/0x170
kmem_cache_free+0x8a/0x1c0
putname+0xe1/0x120
do_sys_open+0x2c5/0x5a0
do_syscall_64+0xb7/0x390
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at
ffff888069d20000
which belongs to the cache names_cache of size 4096
The buggy address is located 0 bytes inside of
4096-byte region [
ffff888069d20000,
ffff888069d21000)
The buggy address belongs to the page:
page:
ffffea0001a74800 refcount:1 mapcount:0 mapping:
ffff88806ccd1380 index:0x0 compound_mapcount: 0
flags: 0x100000000010200(slab|head)
raw:
0100000000010200 dead000000000100 dead000000000200 ffff88806ccd1380
raw:
0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888069d1ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888069d1ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
ffff888069d20000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888069d20080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888069d20100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Link: http://lkml.kernel.org/r/20190610040016.5598-1-devel@etsukata.com
Fixes: 4285f2fcef80 ("tracing: Remove the ULONG_MAX stack trace hackery")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Andreas Gruenbacher [Sat, 8 Jun 2019 12:09:02 +0000 (13:09 +0100)]
gfs2: Fix rounding error in gfs2_iomap_page_prepare
The pos and len arguments to the iomap page_prepare callback are not
block aligned, so we need to take that into account when computing the
number of blocks.
Fixes: d0a22a4b03b8 ("gfs2: Fix iomap write page reclaim deadlock")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Linus Torvalds [Fri, 14 Jun 2019 16:16:47 +0000 (06:16 -1000)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Here are some arm64 fixes for -rc5.
The only non-trivial change (in terms of the diffstat) is fixing our
SVE ptrace API for big-endian machines, but the majority of this is
actually the addition of much-needed comments and updates to the
documentation to try to avoid this mess biting us again in future.
There are still a couple of small things on the horizon, but nothing
major at this point.
Summary:
- Fix broken SVE ptrace API when running in a big-endian configuration
- Fix performance regression due to off-by-one in TLBI range checking
- Fix build regression when using Clang"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/sve: Fix missing SVE/FPSIMD endianness conversions
arm64: tlbflush: Ensure start/end of address range are aligned to stride
arm64: Don't unconditionally add -Wno-psabi to KBUILD_CFLAGS
Linus Torvalds [Fri, 14 Jun 2019 16:08:46 +0000 (06:08 -1000)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"16 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/devm_memremap_pages: fix final page put race
PCI/P2PDMA: track pgmap references per resource, not globally
lib/genalloc: introduce chunk owners
PCI/P2PDMA: fix the gen_pool_add_virt() failure path
mm/devm_memremap_pages: introduce devm_memunmap_pages
drivers/base/devres: introduce devm_release_action()
mm/vmscan.c: fix trying to reclaim unevictable LRU page
coredump: fix race condition between collapse_huge_page() and core dumping
mm/mlock.c: change count_mm_mlocked_page_nr return type
mm: mmu_gather: remove __tlb_reset_range() for force flush
fs/ocfs2: fix race in ocfs2_dentry_attach_lock()
mm/vmscan.c: fix recent_rotated history
mm/mlock.c: mlockall error for flag MCL_ONFAULT
scripts/decode_stacktrace.sh: prefix addr2line with $CROSS_COMPILE
mm/list_lru.c: fix memory leak in __memcg_init_list_lru_node
mm: memcontrol: don't batch updates of local VM stats and events
Daniel Vetter [Fri, 14 Jun 2019 15:46:54 +0000 (17:46 +0200)]
Merge branch 'drm-fixes-5.2' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Fixes for 5.2:
- Extend previous vce fix for resume to uvd and vcn
- Fix bounds checking in ras debugfs interface
- Fix a regression on SI using amdgpu
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613021856.3307-1-alexander.deucher@amd.com
Linus Torvalds [Fri, 14 Jun 2019 15:49:35 +0000 (05:49 -1000)]
Merge tag 'iommu-fixes-v5.2-rc4' of git://git./linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- three fixes for Intel VT-d to fix a potential dead-lock, a formatting
fix and a bit setting fix
- one fix for the ARM-SMMU to make it work on some platforms with
sub-optimal SMMU emulation
* tag 'iommu-fixes-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/arm-smmu: Avoid constant zero in TLBI writes
iommu/vt-d: Set the right field for Page Walk Snoop
iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock
iommu: Add missing new line for dma type
Linus Torvalds [Fri, 14 Jun 2019 15:48:29 +0000 (05:48 -1000)]
Merge tag 'gpio-v5.2-3' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"A single fix for the PCA953x driver affecting some fringe variants of
the chip"
* tag 'gpio-v5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: hack to fix 24 bit gpio expanders
Linus Torvalds [Fri, 14 Jun 2019 15:37:06 +0000 (05:37 -1000)]
Merge tag 'sound-5.2-rc5' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It might feel like deja vu to receive a bulk of changes at rc5, and it
happens again; we've got a collection of fixes for ASoC. Most of fixes
are targeted for the newly merged SOF (Sound Open Firmware) stuff and
the relevant fixes for Intel platforms.
Other than that, there are a few regression fixes for the recent ASoC
core changes and HD-audio quirk, as well as a couple of FireWire fixes
and for other ASoC codecs"
* tag 'sound-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (54 commits)
Revert "ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops"
ALSA: ice1712: Check correct return value to snd_i2c_sendbytes (EWS/DMX 6Fire)
ALSA: oxfw: allow PCM capture for Stanton SCS.1m
ALSA: firewire-motu: fix destruction of data for isochronous resources
ASoC: Intel: sst: fix kmalloc call with wrong flags
ASoC: core: Fix deadlock in snd_soc_instantiate_card()
SoC: rt274: Fix internal jack assignment in set_jack callback
ALSA: hdac: fix memory release for SST and SOF drivers
ASoC: SOF: Intel: hda: use the defined ppcap functions
ASoC: core: move DAI pre-links initiation to snd_soc_instantiate_card
ASoC: Intel: cht_bsw_rt5672: fix kernel oops with platform_name override
ASoC: Intel: cht_bsw_nau8824: fix kernel oops with platform_name override
ASoC: Intel: bytcht_es8316: fix kernel oops with platform_name override
ASoC: Intel: cht_bsw_max98090: fix kernel oops with platform_name override
ASoC: sun4i-i2s: Add offset to RX channel select
ASoC: sun4i-i2s: Fix sun8i tx channel offset mask
ASoC: max98090: remove 24-bit format support if RJ is 0
ASoC: da7219: Fix build error without CONFIG_I2C
ASoC: SOF: Intel: hda: Fix COMPILE_TEST build error
ASoC: SOF: fix DSP oops definitions in FW ABI
...
Andrey Ryabinin [Fri, 14 Jun 2019 14:31:49 +0000 (17:31 +0300)]
x86/kasan: Fix boot with 5-level paging and KASAN
Since commit
d52888aa2753 ("x86/mm: Move LDT remap out of KASLR region on
5-level paging") kernel doesn't boot with KASAN on 5-level paging machines.
The bug is actually in early_p4d_offset() and introduced by commit
12a8cc7fcf54 ("x86/kasan: Use the same shadow offset for 4- and 5-level paging")
early_p4d_offset() tries to convert pgd_val(*pgd) value to a physical
address. This doesn't make sense because pgd_val() already contains the
physical address.
It did work prior to commit
d52888aa2753 because the result of
"__pa_nodebug(pgd_val(*pgd)) & PTE_PFN_MASK" was the same as "pgd_val(*pgd)
& PTE_PFN_MASK". __pa_nodebug() just set some high bits which were masked
out by applying PTE_PFN_MASK.
After the change of the PAGE_OFFSET offset in commit
d52888aa2753
__pa_nodebug(pgd_val(*pgd)) started to return a value with more high bits
set and PTE_PFN_MASK wasn't enough to mask out all of them. So it returns a
wrong not even canonical address and crashes on the attempt to dereference
it.
Switch back to pgd_val() & PTE_PFN_MASK to cure the issue.
Fixes: 12a8cc7fcf54 ("x86/kasan: Use the same shadow offset for 4- and 5-level paging")
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kasan-dev@googlegroups.com
Cc: stable@vger.kernel.org
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190614143149.2227-1-aryabinin@virtuozzo.com
Thomas Gleixner [Thu, 13 Jun 2019 19:40:45 +0000 (21:40 +0200)]
timekeeping: Repair ktime_get_coarse*() granularity
Jason reported that the coarse ktime based time getters advance only once
per second and not once per tick as advertised.
The code reads only the monotonic base time, which advances once per
second. The nanoseconds are accumulated on every tick in xtime_nsec up to
a second and the regular time getters take this nanoseconds offset into
account, but the ktime_get_coarse*() implementation fails to do so.
Add the accumulated xtime_nsec value to the monotonic base time to get the
proper per tick advancing coarse tinme.
Fixes: b9ff604cff11 ("timekeeping: Add ktime_get_coarse_with_offset")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1906132136280.1791@nanos.tec.linutronix.de
Daniel Vetter [Fri, 14 Jun 2019 09:31:13 +0000 (11:31 +0200)]
Merge tag 'drm-misc-next-2019-06-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.3:
UAPI Changes:
Cross-subsystem Changes:
- Add code to signal all dma-fences when freed with pending signals.
- Annotate reservation object access in CONFIG_DEBUG_MUTEXES
Core Changes:
- Assorted documentation fixes.
- Use irqsave/restore spinlock to add crc entry.
- Move code around to drm_client, for internal modeset clients.
- Make drm_crtc.h and drm_debugfs.h self-contained.
- Remove drm_fb_helper_connector.
- Add bootsplash to todo.
- Fix lock ordering in pan_display_legacy.
- Support pinning buffers to current location in gem-vram.
- Remove the now unused locking functions from gem-vram.
- Remove the now unused kmap-object argument from vram helpers.
- Stop checking return value of debugfs_create.
- Add atomic encoder enable/disable helpers.
- pass drm_atomic_state to atomic connector check.
- Add atomic support for bridge enable/disable.
- Add self refresh helpers to core.
Driver Changes:
- Add extra delay to make MTP SDM845 work.
- Small fixes to virtio, vkms, sii902x, sii9234, ast, mcde, analogix, rockchip.
- Add zpos and ?BGR8888 support to meson.
- More removals of drm_os_linux and drmP headers for amd, radeon, sti, r128, r128, savage, sis.
- Allow synopsis to unwedge the i2c hdmi bus.
- Add orientation quirks for GPD panels.
- Edid cleanups and fixing handling for edid < 1.2.
- Add runtime pm to stm.
- Handle s/r in dw-hdmi.
- Add hooks for power on/off to dsi for stm.
- Remove virtio dirty tracking code, done in drm core.
- Rework BO handling in ast and mgag200.
Tiny conflict in drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c,
needed #include <linux/slab.h> to make it compile.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0e01de30-9797-853c-732f-4a5bd6e61445@linux.intel.com
Daniel Vetter [Thu, 13 Jun 2019 20:44:21 +0000 (22:44 +0200)]
Merge tag 'drm-misc-fixes-2019-06-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Sean writes:
meson: A few G12A fixes across the driver (Neil)
quirks: A couple quirks for GPD devices (Hans)
gem_shmem: Use writecombine when vmapping non-dmabuf BOs (Boris)
panfrost: A couple tweaks to requiring devfreq (Neil & Ezequiel)
edid: Ensure we return the override mode when ddc probe fails (Jani)
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613143946.GA24233@art_vandelay
Hui Wang [Fri, 14 Jun 2019 08:44:12 +0000 (16:44 +0800)]
Revert "ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops"
This reverts commit
9cb40eb184c4220d244a532bd940c6345ad9dbd9.
This patch introduces noise and headphone playback issue after
rebooting or suspending/resuming. Let us revert it.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203831
Fixes: 9cb40eb184c4 ("ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sean Paul [Fri, 14 Jun 2019 00:27:00 +0000 (20:27 -0400)]
drm/amdgpu: Fix connector atomic_check compilation fail
I missed amdgpu in my connnector_helper_funcs->atomic_check conversion,
which is understandably causing compilation failures.
Fixes: 6f3b62781bbd ("drm: Convert connector_helper_funcs->atomic_check to accept drm_atomic_state")
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [for rcar lvds]
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <karolherbst@gmail.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614002713.141340-1-sean@poorly.run
Dan Williams [Thu, 13 Jun 2019 22:56:33 +0000 (15:56 -0700)]
mm/devm_memremap_pages: fix final page put race
Logan noticed that devm_memremap_pages_release() kills the percpu_ref
drops all the page references that were acquired at init and then
immediately proceeds to unplug, arch_remove_memory(), the backing pages
for the pagemap. If for some reason device shutdown actually collides
with a busy / elevated-ref-count page then arch_remove_memory() should
be deferred until after that reference is dropped.
As it stands the "wait for last page ref drop" happens *after*
devm_memremap_pages_release() returns, which is obviously too late and
can lead to crashes.
Fix this situation by assigning the responsibility to wait for the
percpu_ref to go idle to devm_memremap_pages() with a new ->cleanup()
callback. Implement the new cleanup callback for all
devm_memremap_pages() users: pmem, devdax, hmm, and p2pdma.
Link: http://lkml.kernel.org/r/155727339156.292046.5432007428235387859.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: 41e94a851304 ("add devm_memremap_pages")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Williams [Thu, 13 Jun 2019 22:56:30 +0000 (15:56 -0700)]
PCI/P2PDMA: track pgmap references per resource, not globally
In preparation for fixing a race between devm_memremap_pages_release()
and the final put of a page from the device-page-map, allocate a
percpu-ref per p2pdma resource mapping.
Link: http://lkml.kernel.org/r/155727338646.292046.9922678317501435597.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Williams [Thu, 13 Jun 2019 22:56:27 +0000 (15:56 -0700)]
lib/genalloc: introduce chunk owners
The p2pdma facility enables a provider to publish a pool of dma
addresses for a consumer to allocate. A genpool is used internally by
p2pdma to collect dma resources, 'chunks', to be handed out to
consumers. Whenever a consumer allocates a resource it needs to pin the
'struct dev_pagemap' instance that backs the chunk selected by
pci_alloc_p2pmem().
Currently that reference is taken globally on the entire provider
device. That sets up a lifetime mismatch whereby the p2pdma core needs
to maintain hacks to make sure the percpu_ref is not released twice.
This lifetime mismatch also stands in the way of a fix to
devm_memremap_pages() whereby devm_memremap_pages_release() must wait for
the percpu_ref ->release() callback to complete before it can proceed to
teardown pages.
So, towards fixing this situation, introduce the ability to store a 'chunk
owner' at gen_pool_add() time, and a facility to retrieve the owner at
gen_pool_{alloc,free}() time. For p2pdma this will be used to store and
recall individual dev_pagemap reference counter instances per-chunk.
Link: http://lkml.kernel.org/r/155727338118.292046.13407378933221579644.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Williams [Thu, 13 Jun 2019 22:56:24 +0000 (15:56 -0700)]
PCI/P2PDMA: fix the gen_pool_add_virt() failure path
The pci_p2pdma_add_resource() implementation immediately frees the pgmap
if gen_pool_add_virt() fails. However, that means that when @dev
triggers a devres release devm_memremap_pages_release() will crash
trying to access the freed @pgmap.
Use the new devm_memunmap_pages() to manually free the mapping in the
error path.
Link: http://lkml.kernel.org/r/155727337603.292046.13101332703665246702.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Fixes: 52916982af48 ("PCI/P2PDMA: Support peer-to-peer memory")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Williams [Thu, 13 Jun 2019 22:56:21 +0000 (15:56 -0700)]
mm/devm_memremap_pages: introduce devm_memunmap_pages
Use the new devm_release_action() facility to allow
devm_memremap_pages_release() to be manually triggered.
Link: http://lkml.kernel.org/r/155727337088.292046.5774214552136776763.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Williams [Thu, 13 Jun 2019 22:56:18 +0000 (15:56 -0700)]
drivers/base/devres: introduce devm_release_action()
Patch series "mm/devm_memremap_pages: Fix page release race", v2.
Logan audited the devm_memremap_pages() shutdown path and noticed that
it was possible to proceed to arch_remove_memory() before all potential
page references have been reaped.
Introduce a new ->cleanup() callback to do the work of waiting for any
straggling page references and then perform the percpu_ref_exit() in
devm_memremap_pages_release() context.
For p2pdma this involves some deeper reworks to reference count
resources on a per-instance basis rather than a per pci-device basis. A
modified genalloc api is introduced to convey a driver-private pointer
through gen_pool_{alloc,free}() interfaces. Also, a
devm_memunmap_pages() api is introduced since p2pdma does not
auto-release resources on a setup failure.
The dax and pmem changes pass the nvdimm unit tests, and the p2pdma
changes should now pass testing with the pci_p2pdma_release() fix.
Jrme, how does this look for HMM?
This patch (of 6):
The devm_add_action() facility allows a resource allocation routine to
add custom devm semantics. One such user is devm_memremap_pages().
There is now a need to manually trigger
devm_memremap_pages_release(). Introduce devm_release_action() so the
release action can be triggered via a new devm_memunmap_pages() api in a
follow-on change.
Link: http://lkml.kernel.org/r/155727336530.292046.2926860263201336366.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Thu, 13 Jun 2019 22:56:15 +0000 (15:56 -0700)]
mm/vmscan.c: fix trying to reclaim unevictable LRU page
There was the below bug report from Wu Fangsuo.
On the CMA allocation path, isolate_migratepages_range() could isolate
unevictable LRU pages and reclaim_clean_page_from_list() can try to
reclaim them if they are clean file-backed pages.
page:
ffffffbf02f33b40 count:86 mapcount:84 mapping:
ffffffc08fa7a810 index:0x24
flags: 0x19040c(referenced|uptodate|arch_1|mappedtodisk|unevictable|mlocked)
raw:
000000000019040c ffffffc08fa7a810 0000000000000024 0000005600000053
raw:
ffffffc009b05b20 ffffffc009b05b20 0000000000000000 ffffffc09bf3ee80
page dumped because: VM_BUG_ON_PAGE(PageLRU(page) || PageUnevictable(page))
page->mem_cgroup:
ffffffc09bf3ee80
------------[ cut here ]------------
kernel BUG at /home/build/farmland/adroid9.0/kernel/linux/mm/vmscan.c:1350!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 7125 Comm: syz-executor Tainted: G S 4.14.81 #3
Hardware name: ASR AQUILAC EVB (DT)
task:
ffffffc00a54cd00 task.stack:
ffffffc009b00000
PC is at shrink_page_list+0x1998/0x3240
LR is at shrink_page_list+0x1998/0x3240
pc : [<
ffffff90083a2158>] lr : [<
ffffff90083a2158>] pstate:
60400045
sp :
ffffffc009b05940
..
shrink_page_list+0x1998/0x3240
reclaim_clean_pages_from_list+0x3c0/0x4f0
alloc_contig_range+0x3bc/0x650
cma_alloc+0x214/0x668
ion_cma_allocate+0x98/0x1d8
ion_alloc+0x200/0x7e0
ion_ioctl+0x18c/0x378
do_vfs_ioctl+0x17c/0x1780
SyS_ioctl+0xac/0xc0
Wu found it's due to commit
ad6b67041a45 ("mm: remove SWAP_MLOCK in
ttu"). Before that, unevictable pages go to cull_mlocked so that we
can't reach the VM_BUG_ON_PAGE line.
To fix the issue, this patch filters out unevictable LRU pages from the
reclaim_clean_pages_from_list in CMA.
Link: http://lkml.kernel.org/r/20190524071114.74202-1-minchan@kernel.org
Fixes: ad6b67041a45 ("mm: remove SWAP_MLOCK in ttu")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: Wu Fangsuo <fangsuowu@asrmicro.com>
Debugged-by: Wu Fangsuo <fangsuowu@asrmicro.com>
Tested-by: Wu Fangsuo <fangsuowu@asrmicro.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Pankaj Suryawanshi <pankaj.suryawanshi@einfochips.com>
Cc: <stable@vger.kernel.org> [4.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrea Arcangeli [Thu, 13 Jun 2019 22:56:11 +0000 (15:56 -0700)]
coredump: fix race condition between collapse_huge_page() and core dumping
When fixing the race conditions between the coredump and the mmap_sem
holders outside the context of the process, we focused on
mmget_not_zero()/get_task_mm() callers in
04f5866e41fb70 ("coredump: fix
race condition between mmget_not_zero()/get_task_mm() and core
dumping"), but those aren't the only cases where the mmap_sem can be
taken outside of the context of the process as Michal Hocko noticed
while backporting that commit to older -stable kernels.
If mmgrab() is called in the context of the process, but then the
mm_count reference is transferred outside the context of the process,
that can also be a problem if the mmap_sem has to be taken for writing
through that mm_count reference.
khugepaged registration calls mmgrab() in the context of the process,
but the mmap_sem for writing is taken later in the context of the
khugepaged kernel thread.
collapse_huge_page() after taking the mmap_sem for writing doesn't
modify any vma, so it's not obvious that it could cause a problem to the
coredump, but it happens to modify the pmd in a way that breaks an
invariant that pmd_trans_huge_lock() relies upon. collapse_huge_page()
needs the mmap_sem for writing just to block concurrent page faults that
call pmd_trans_huge_lock().
Specifically the invariant that "!pmd_trans_huge()" cannot become a
"pmd_trans_huge()" doesn't hold while collapse_huge_page() runs.
The coredump will call __get_user_pages() without mmap_sem for reading,
which eventually can invoke a lockless page fault which will need a
functional pmd_trans_huge_lock().
So collapse_huge_page() needs to use mmget_still_valid() to check it's
not running concurrently with the coredump... as long as the coredump
can invoke page faults without holding the mmap_sem for reading.
This has "Fixes: khugepaged" to facilitate backporting, but in my view
it's more a bug in the coredump code that will eventually have to be
rewritten to stop invoking page faults without the mmap_sem for reading.
So the long term plan is still to drop all mmget_still_valid().
Link: http://lkml.kernel.org/r/20190607161558.32104-1-aarcange@redhat.com
Fixes: ba76149f47d8 ("thp: khugepaged")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
swkhack [Thu, 13 Jun 2019 22:56:08 +0000 (15:56 -0700)]
mm/mlock.c: change count_mm_mlocked_page_nr return type
On a 64-bit machine the value of "vma->vm_end - vma->vm_start" may be
negative when using 32 bit ints and the "count >> PAGE_SHIFT"'s result
will be wrong. So change the local variable and return value to
unsigned long to fix the problem.
Link: http://lkml.kernel.org/r/20190513023701.83056-1-swkhack@gmail.com
Fixes: 0cf2f6f6dc60 ("mm: mlock: check against vma for actual mlock() size")
Signed-off-by: swkhack <swkhack@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yang Shi [Thu, 13 Jun 2019 22:56:05 +0000 (15:56 -0700)]
mm: mmu_gather: remove __tlb_reset_range() for force flush
A few new fields were added to mmu_gather to make TLB flush smarter for
huge page by telling what level of page table is changed.
__tlb_reset_range() is used to reset all these page table state to
unchanged, which is called by TLB flush for parallel mapping changes for
the same range under non-exclusive lock (i.e. read mmap_sem).
Before commit
dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in
munmap"), the syscalls (e.g. MADV_DONTNEED, MADV_FREE) which may update
PTEs in parallel don't remove page tables. But, the forementioned
commit may do munmap() under read mmap_sem and free page tables. This
may result in program hang on aarch64 reported by Jan Stancek. The
problem could be reproduced by his test program with slightly modified
below.
---8<---
static int map_size = 4096;
static int num_iter = 500;
static long threads_total;
static void *distant_area;
void *map_write_unmap(void *ptr)
{
int *fd = ptr;
unsigned char *map_address;
int i, j = 0;
for (i = 0; i < num_iter; i++) {
map_address = mmap(distant_area, (size_t) map_size, PROT_WRITE | PROT_READ,
MAP_SHARED | MAP_ANONYMOUS, -1, 0);
if (map_address == MAP_FAILED) {
perror("mmap");
exit(1);
}
for (j = 0; j < map_size; j++)
map_address[j] = 'b';
if (munmap(map_address, map_size) == -1) {
perror("munmap");
exit(1);
}
}
return NULL;
}
void *dummy(void *ptr)
{
return NULL;
}
int main(void)
{
pthread_t thid[2];
/* hint for mmap in map_write_unmap() */
distant_area = mmap(0, DISTANT_MMAP_SIZE, PROT_WRITE | PROT_READ,
MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
munmap(distant_area, (size_t)DISTANT_MMAP_SIZE);
distant_area += DISTANT_MMAP_SIZE / 2;
while (1) {
pthread_create(&thid[0], NULL, map_write_unmap, NULL);
pthread_create(&thid[1], NULL, dummy, NULL);
pthread_join(thid[0], NULL);
pthread_join(thid[1], NULL);
}
}
---8<---
The program may bring in parallel execution like below:
t1 t2
munmap(map_address)
downgrade_write(&mm->mmap_sem);
unmap_region()
tlb_gather_mmu()
inc_tlb_flush_pending(tlb->mm);
free_pgtables()
tlb->freed_tables = 1
tlb->cleared_pmds = 1
pthread_exit()
madvise(thread_stack, 8M, MADV_DONTNEED)
zap_page_range()
tlb_gather_mmu()
inc_tlb_flush_pending(tlb->mm);
tlb_finish_mmu()
if (mm_tlb_flush_nested(tlb->mm))
__tlb_reset_range()
__tlb_reset_range() would reset freed_tables and cleared_* bits, but this
may cause inconsistency for munmap() which do free page tables. Then it
may result in some architectures, e.g. aarch64, may not flush TLB
completely as expected to have stale TLB entries remained.
Use fullmm flush since it yields much better performance on aarch64 and
non-fullmm doesn't yields significant difference on x86.
The original proposed fix came from Jan Stancek who mainly debugged this
issue, I just wrapped up everything together.
Jan's testing results:
v5.2-rc2-24-gbec7550cca10
--------------------------
mean stddev
real 37.382 2.780
user 1.420 0.078
sys 54.658 1.855
v5.2-rc2-24-gbec7550cca10 + "mm: mmu_gather: remove __tlb_reset_range() for force flush"
---------------------------------------------------------------------------------------_
mean stddev
real 37.119 2.105
user 1.548 0.087
sys 55.698 1.357
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/1558322252-113575-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Suggested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org> [4.20+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wengang Wang [Thu, 13 Jun 2019 22:56:01 +0000 (15:56 -0700)]
fs/ocfs2: fix race in ocfs2_dentry_attach_lock()
ocfs2_dentry_attach_lock() can be executed in parallel threads against the
same dentry. Make that race safe. The race is like this:
thread A thread B
(A1) enter ocfs2_dentry_attach_lock,
seeing dentry->d_fsdata is NULL,
and no alias found by
ocfs2_find_local_alias, so kmalloc
a new ocfs2_dentry_lock structure
to local variable "dl", dl1
.....
(B1) enter ocfs2_dentry_attach_lock,
seeing dentry->d_fsdata is NULL,
and no alias found by
ocfs2_find_local_alias so kmalloc
a new ocfs2_dentry_lock structure
to local variable "dl", dl2.
......
(A2) set dentry->d_fsdata with dl1,
call ocfs2_dentry_lock() and increase
dl1->dl_lockres.l_ro_holders to 1 on
success.
......
(B2) set dentry->d_fsdata with dl2
call ocfs2_dentry_lock() and increase
dl2->dl_lockres.l_ro_holders to 1 on
success.
......
(A3) call ocfs2_dentry_unlock()
and decrease
dl2->dl_lockres.l_ro_holders to 0
on success.
....
(B3) call ocfs2_dentry_unlock(),
decreasing
dl2->dl_lockres.l_ro_holders, but
see it's zero now, panic
Link: http://lkml.kernel.org/r/20190529174636.22364-1-wen.gang.wang@oracle.com
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reported-by: Daniel Sobe <daniel.sobe@nxp.com>
Tested-by: Daniel Sobe <daniel.sobe@nxp.com>
Reviewed-by: Changwei Ge <gechangwei@live.cn>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill Tkhai [Thu, 13 Jun 2019 22:55:58 +0000 (15:55 -0700)]
mm/vmscan.c: fix recent_rotated history
Johannes pointed out that after commit
886cf1901db9 ("mm: move
recent_rotated pages calculation to shrink_inactive_list()") we lost all
zone_reclaim_stat::recent_rotated history.
This fixes it.
Link: http://lkml.kernel.org/r/155905972210.26456.11178359431724024112.stgit@localhost.localdomain
Fixes: 886cf1901db9 ("mm: move recent_rotated pages calculation to shrink_inactive_list()")
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Potyra, Stefan [Thu, 13 Jun 2019 22:55:55 +0000 (15:55 -0700)]
mm/mlock.c: mlockall error for flag MCL_ONFAULT
If mlockall() is called with only MCL_ONFAULT as flag, it removes any
previously applied lockings and does nothing else.
This behavior is counter-intuitive and doesn't match the Linux man page.
For mlockall():
EINVAL Unknown flags were specified or MCL_ONFAULT was specified
without either MCL_FUTURE or MCL_CURRENT.
Consequently, return the error EINVAL, if only MCL_ONFAULT is passed.
That way, applications will at least detect that they are calling
mlockall() incorrectly.
Link: http://lkml.kernel.org/r/20190527075333.GA6339@er01809n.ebgroup.elektrobit.com
Fixes: b0f205c2a308 ("mm: mlock: add mlock flags to enable VM_LOCKONFAULT usage")
Signed-off-by: Stefan Potyra <Stefan.Potyra@elektrobit.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Manuel Traut [Thu, 13 Jun 2019 22:55:52 +0000 (15:55 -0700)]
scripts/decode_stacktrace.sh: prefix addr2line with $CROSS_COMPILE
At least for ARM64 kernels compiled with the crosstoolchain from
Debian/stretch or with the toolchain from kernel.org the line number is
not decoded correctly by 'decode_stacktrace.sh':
$ echo "[ 136.513051] f1+0x0/0xc [kcrash]" | \
CROSS_COMPILE=/opt/gcc-8.1.0-nolibc/aarch64-linux/bin/aarch64-linux- \
./scripts/decode_stacktrace.sh /scratch/linux-arm64/vmlinux \
/scratch/linux-arm64 \
/nfs/debian/lib/modules/4.20.0-devel
[ 136.513051] f1 (/linux/drivers/staging/kcrash/kcrash.c:68) kcrash
If addr2line from the toolchain is used the decoded line number is correct:
[ 136.513051] f1 (/linux/drivers/staging/kcrash/kcrash.c:57) kcrash
Link: http://lkml.kernel.org/r/20190527083425.3763-1-manut@linutronix.de
Signed-off-by: Manuel Traut <manut@linutronix.de>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shakeel Butt [Thu, 13 Jun 2019 22:55:49 +0000 (15:55 -0700)]
mm/list_lru.c: fix memory leak in __memcg_init_list_lru_node
Syzbot reported following memory leak:
ffffffffda RBX:
0000000000000003 RCX:
0000000000441f79
BUG: memory leak
unreferenced object 0xffff888114f26040 (size 32):
comm "syz-executor626", pid 7056, jiffies
4294948701 (age 39.410s)
hex dump (first 32 bytes):
40 60 f2 14 81 88 ff ff 40 60 f2 14 81 88 ff ff @`......@`......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
slab_post_alloc_hook mm/slab.h:439 [inline]
slab_alloc mm/slab.c:3326 [inline]
kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
kmalloc include/linux/slab.h:547 [inline]
__memcg_init_list_lru_node+0x58/0xf0 mm/list_lru.c:352
memcg_init_list_lru_node mm/list_lru.c:375 [inline]
memcg_init_list_lru mm/list_lru.c:459 [inline]
__list_lru_init+0x193/0x2a0 mm/list_lru.c:626
alloc_super+0x2e0/0x310 fs/super.c:269
sget_userns+0x94/0x2a0 fs/super.c:609
sget+0x8d/0xb0 fs/super.c:660
mount_nodev+0x31/0xb0 fs/super.c:1387
fuse_mount+0x2d/0x40 fs/fuse/inode.c:1236
legacy_get_tree+0x27/0x80 fs/fs_context.c:661
vfs_get_tree+0x2e/0x120 fs/super.c:1476
do_new_mount fs/namespace.c:2790 [inline]
do_mount+0x932/0xc50 fs/namespace.c:3110
ksys_mount+0xab/0x120 fs/namespace.c:3319
__do_sys_mount fs/namespace.c:3333 [inline]
__se_sys_mount fs/namespace.c:3330 [inline]
__x64_sys_mount+0x26/0x30 fs/namespace.c:3330
do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This is a simple off by one bug on the error path.
Link: http://lkml.kernel.org/r/20190528043202.99980-1-shakeelb@google.com
Fixes: 60d3fd32a7a9 ("list_lru: introduce per-memcg lists")
Reported-by: syzbot+f90a420dfe2b1b03cb2c@syzkaller.appspotmail.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: <stable@vger.kernel.org> [4.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Thu, 13 Jun 2019 22:55:46 +0000 (15:55 -0700)]
mm: memcontrol: don't batch updates of local VM stats and events
The kernel test robot noticed a 26% will-it-scale pagefault regression
from commit
42a300353577 ("mm: memcontrol: fix recursive statistics
correctness & scalabilty"). This appears to be caused by bouncing the
additional cachelines from the new hierarchical statistics counters.
We can fix this by getting rid of the batched local counters instead.
Originally, there were *only* group-local counters, and they were fully
maintained per cpu. A reader of a stats file high up in the cgroup tree
would have to walk the entire subtree and collect each level's per-cpu
counters to get the recursive view. This was prohibitively expensive,
and so we switched to per-cpu batched updates of the local counters
during
a983b5ebee57 ("mm: memcontrol: fix excessive complexity in
memory.stat reporting"), reducing the complexity from nr_subgroups *
nr_cpus to nr_subgroups.
With growing machines and cgroup trees, the tree walk itself became too
expensive for monitoring top-level groups, and this is when the culprit
patch added hierarchy counters on each cgroup level. When the per-cpu
batch size would be reached, both the local and the hierarchy counters
would get batch-updated from the per-cpu delta simultaneously.
This makes local and hierarchical counter reads blazingly fast, but it
unfortunately makes the write-side too cache line intense.
Since local counter reads were never a problem - we only centralized
them to accelerate the hierarchy walk - and use of the local counters
are becoming rarer due to replacement with hierarchical views (ongoing
rework in the page reclaim and workingset code), we can make those local
counters unbatched per-cpu counters again.
The scheme will then be as such:
when a memcg statistic changes, the writer will:
- update the local counter (per-cpu)
- update the batch counter (per-cpu). If the batch is full:
- spill the batch into the group's atomic_t
- spill the batch into all ancestors' atomic_ts
- empty out the batch counter (per-cpu)
when a local memcg counter is read, the reader will:
- collect the local counter from all cpus
when a hiearchy memcg counter is read, the reader will:
- read the atomic_t
We might be able to simplify this further and make the recursive
counters unbatched per-cpu counters as well (batch upward propagation,
but leave per-cpu collection to the readers), but that will require a
more in-depth analysis and testing of all the callsites. Deal with the
immediate regression for now.
Link: http://lkml.kernel.org/r/20190521151647.GB2870@cmpxchg.org
Fixes: 42a300353577 ("mm: memcontrol: fix recursive statistics correctness & scalabilty")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Tested-by: kernel test robot <rong.a.chen@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Tue, 4 Jun 2019 17:54:12 +0000 (19:54 +0200)]
x86/fpu: Don't use current->mm to check for a kthread
current->mm can be non-NULL if a kthread calls use_mm(). Check for
PF_KTHREAD instead to decide when to store user mode FP state.
Fixes: 2722146eb784 ("x86/fpu: Remove fpu->initialized")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Aubrey Li <aubrey.li@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190604175411.GA27477@lst.de
Sean Paul [Thu, 13 Jun 2019 15:17:23 +0000 (11:17 -0400)]
drm/connector: Fix kerneldoc warning in HDR_OUTPUT_METADATA description
Fixes the following warning:
../drivers/gpu/drm/drm_connector.c:981: WARNING: Definition list ends without a blank line; unexpected unindent.
Fixes: a09db883e5d9 ("drm: Fix docbook warnings in hdr metadata helper structures")
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: "Ville Syrjä" <ville.syrjala@linux.intel.com>
Cc: Hans Verkuil <hansverk@cisco.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: Sean Paul <sean@poorly.run> (v1)
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613151727.133696-1-sean@poorly.run
Sean Paul [Tue, 11 Jun 2019 16:08:20 +0000 (12:08 -0400)]
drm/rockchip: Use dirtyfb helper
Instead of flushing all vops every time we get a dirtyfb call, use the
damage helper to kick off an atomic commit. Even though we don't use
damage clips, the helper commit will force us through the normal
psr_inhibit_get/put sequence.
Changes in v3:
- Added to the set
Changes in v4:
- None
Changes in v5:
- None
Link to v3: https://patchwork.freedesktop.org/patch/msgid/
20190502194956.218441-7-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/
20190508160920.144739-7-sean@poorly.run
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-7-sean@poorly.run
Sean Paul [Wed, 12 Jun 2019 14:50:19 +0000 (10:50 -0400)]
drm: Add helpers to kick off self refresh mode in drivers
This patch adds a new drm helper library to help drivers implement
self refresh. Drivers choosing to use it will register crtcs and
will receive callbacks when it's time to enter or exit self refresh
mode.
In its current form, it has a timer which will trigger after a
driver-specified amount of inactivity. When the timer triggers, the
helpers will submit a new atomic commit to shut the refreshing pipe
off. On the next atomic commit, the drm core will revert the self
refresh state and bring everything back up to be actively driven.
From the driver's perspective, this works like a regular disable/enable
cycle. The driver need only check the 'self_refresh_active' state in
crtc_state. It should initiate self refresh mode on the panel and enter
an off or low-power state.
Changes in v2:
- s/psr/self_refresh/ (Daniel)
- integrated the psr exit into the commit that wakes it up (Jose/Daniel)
- made the psr state per-crtc (Jose/Daniel)
Changes in v3:
- Remove the self_refresh_(active|changed) from connector state (Daniel)
- Simplify loop in drm_self_refresh_helper_alter_state (Daniel)
- Improve self_refresh_aware comment (Daniel)
- s/self_refresh_state/self_refresh_data/ (Daniel)
Changes in v4:
- Move docbook location below panel (Daniel)
- Improve docbook with references and more detailed explanation (Daniel)
- Instead of register/unregister, use init/cleanup (Daniel)
Changes in v5:
- Resolved conflict in drm_atomic_helper.c #include block
- Resolved conflict in rst with HDCP helper docs
Changes in v6:
- Fix include ordering, clean up forward declarations (Sam)
Link to v1: https://patchwork.freedesktop.org/patch/msgid/
20190228210939.83386-2-sean@poorly.run
Link to v2: https://patchwork.freedesktop.org/patch/msgid/
20190326204509.96515-1-sean@poorly.run
Link to v3: https://patchwork.freedesktop.org/patch/msgid/
20190502194956.218441-6-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/
20190508160920.144739-6-sean@poorly.run
Link to v5: https://patchwork.freedesktop.org/patch/msgid/
20190611160844.257498-6-sean@poorly.run
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
Sean Paul [Tue, 11 Jun 2019 16:08:18 +0000 (12:08 -0400)]
drm: Convert connector_helper_funcs->atomic_check to accept drm_atomic_state
Everyone who implements connector_helper_funcs->atomic_check reaches
into the connector state to get the atomic state. Instead of continuing
this pattern, change the callback signature to just give atomic state
and let the driver determine what it does and does not need from it.
Eventually all atomic functions should do this, but that's just too much
busy work for me.
Changes in v3:
- Added to the set
Changes in v4:
- None
Changes in v5:
- intel_digital_connector_atomic_check declaration moved to i915_atomic.h
Link to v3: https://patchwork.freedesktop.org/patch/msgid/
20190502194956.218441-5-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/
20190508160920.144739-5-sean@poorly.run
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [for rcar lvds]
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-5-sean@poorly.run
Sean Paul [Tue, 11 Jun 2019 16:08:17 +0000 (12:08 -0400)]
drm: Add atomic variants for bridge enable/disable
This patch adds atomic variants for all of
pre_enable/enable/disable/post_disable bridge functions. These will be
called from the appropriate atomic helper functions. If the bridge
driver doesn't implement the atomic version of the function, we will
fall back to the vanilla implementation.
Note that some drivers call drm_bridge_disable directly, and these cases
are not covered. It's up to the driver to decide whether to implement
both atomic_disable and disable, or if it's not necessary.
Changes in v3:
- Added to the patchset
Changes in v4:
- Fix up docbook references (Daniel)
Changes in v5:
- None
Link to v3: https://patchwork.freedesktop.org/patch/msgid/
20190502194956.218441-4-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/
20190508160920.144739-4-sean@poorly.run
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-4-sean@poorly.run
Laurent Pinchart [Tue, 11 Jun 2019 20:51:43 +0000 (16:51 -0400)]
drm: Add drm_atomic_get_(old|new)_connector_for_encoder() helpers
Add functions to the atomic core to retrieve the old and new connectors
associated with an encoder in a drm_atomic_state. This is useful for
encoders and bridges that need to access the connector, for instance for
the drm_display_info.
The CRTC associated with the encoder can also be retrieved through the
connector state, and from it, the old and new CRTC states.
Changed in v4:
- Added to the set
Changed in v5:
- Fix up docbook (Daniel & Laurent)
Changed in v6:
- Updated commit subject (Sam)
Link to v4: https://patchwork.freedesktop.org/patch/msgid/
20190508160920.144739-3-sean@poorly.run
Link to v5: https://patchwork.freedesktop.org/patch/msgid/
20190611160844.257498-3-sean@poorly.run
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[seanpaul removed WARNs from helpers and added docs to explain why
returning NULL might be valid]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611205147.181298-1-sean@poorly.run
Sean Paul [Tue, 11 Jun 2019 20:49:53 +0000 (16:49 -0400)]
drm: Add atomic variants of enable/disable to encoder helper funcs
This patch adds atomic_enable and atomic_disable callbacks to the
encoder helpers. This will allow encoders to make informed decisions in
their start-up/shutdown based on the committed state.
Aside from the new hooks, this patch also introduces the new signature
for .atomic_* functions going forward. Instead of passing object state
(well, encoders don't have atomic state, but let's ignore that), we pass
the entire atomic state so the driver can inspect more than what's
happening locally.
This is particularly important for the upcoming self refresh helpers.
Changes in v3:
- Added patch to the set
Changes in v4:
- Move atomic_disable above prepare (Daniel)
- Add breadcrumb to .enable() docbook (Daniel)
Changes in v5:
- None
Changes in v6:
- Tweak kerneldoc some more (Sam)
Link to v3: https://patchwork.freedesktop.org/patch/msgid/
20190502194956.218441-2-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/
20190508160920.144739-2-sean@poorly.run
Link to v5: https://patchwork.freedesktop.org/patch/msgid/
20190611160844.257498-2-sean@poorly.run
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611204959.180855-1-sean@poorly.run
Thomas Gleixner [Thu, 13 Jun 2019 16:34:54 +0000 (18:34 +0200)]
Merge tag 'timers-v5.2-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent
Pull timer fixes from Daniel Lezcano:
- Fix missing notrace leading to deadlock on arch_arm_timer (Julien Thierry)
- Fix compilation warning on timer-ti-dm (Philippe Mazenauer)
Linus Torvalds [Thu, 13 Jun 2019 15:59:05 +0000 (05:59 -1000)]
Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- regression fixes (reverts) for module loading changes that turned out
to be incompatible with some userspace, from Benjamin Tissoires
- regression fix for special Logitech unifiying receiver 0xc52f, from
Hans de Goede
- a few device ID additions to logitech driver, from Hans de Goede
- fix for Bluetooth support on 2nd-gen Wacom Intuos Pro, from Jason
Gerecke
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-dj: Fix 064d:c52f receiver support
Revert "HID: core: Call request_module before doing device_add"
Revert "HID: core: Do not call request_module() in async context"
Revert "HID: Increase maximum report size allowed by hid_field_extract()"
HID: a4tech: fix horizontal scrolling
HID: hyperv: Add a module description line
HID: logitech-hidpp: Add support for the S510 remote control
HID: multitouch: handle faulty Elo touch device
HID: wacom: Sync INTUOSP2_BT touch state after each frame if necessary
HID: wacom: Correct button numbering 2nd-gen Intuos Pro over Bluetooth
HID: wacom: Send BTN_TOUCH in response to INTUOSP2_BT eraser contact
HID: wacom: Don't report anything prior to the tool entering range
HID: wacom: Don't set tool type until we're in range
HID: rmi: Use SET_REPORT request on control endpoint for Acer Switch 3 and 5
HID: logitech-hidpp: add support for the MX5500 keyboard
HID: logitech-dj: add support for the Logitech MX5500's Bluetooth Mini-Receiver
HID: i2c-hid: add iBall Aer3 to descriptor override
Greg Kroah-Hartman [Thu, 13 Jun 2019 11:46:18 +0000 (13:46 +0200)]
sti: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613114618.GD13119@kroah.com
Takashi Iwai [Thu, 13 Jun 2019 15:33:34 +0000 (17:33 +0200)]
Merge tag 'asoc-fix-v5.2-rc4' of https://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.2
There's an awful lot of fixes here, almost all for the newly introduced
SoF DSP drivers (including a few things it turned up in shared code).
This is a large and complex piece of code so it's not surprising that
there have been quite a few issues here, fortunately things seem to have
mostly calmed down now. Otherwise there's just a smattering of small fixes.
Greg Kroah-Hartman [Thu, 13 Jun 2019 13:34:39 +0000 (15:34 +0200)]
drm: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Because there is no need to check these functions, a number of local
functions can be made to return void to simplify things as nothing can
fail.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613133439.GA6715@kroah.com
Linus Walleij [Sun, 9 Jun 2019 23:13:39 +0000 (01:13 +0200)]
drm/bridge: analogix_dp: Convert to GPIO descriptors
This converts the Analogix display port to use GPIO descriptors
instead of DT-extracted numbers.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609231339.22136-1-linus.walleij@linaro.org
Linus Walleij [Sun, 9 Jun 2019 22:32:54 +0000 (00:32 +0200)]
drm/bridge: analogix-anx78xx: Drop of_gpio.h include
This include is only used for some gpio drivers and consumers
that look up GPIO numbers directly from the device tree.
This driver does not use it and only needs <linux/gpio/consumer.h>.
Delete the unused include.
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609223254.8523-1-linus.walleij@linaro.org
Hariprasad Kelam [Sat, 25 May 2019 17:59:37 +0000 (23:29 +0530)]
drm/bridge: analogix_dp: possible condition with no effect (if == else)
fix below warning reported by coccicheck
./drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:1414:6-8: WARNING:
possible condition with no effect (if == else)
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190525175937.GA29368@hari-Inspiron-1545
Greg Kroah-Hartman [Thu, 13 Jun 2019 11:57:17 +0000 (13:57 +0200)]
panel: rocktech: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613115717.GB26335@kroah.com
Greg Kroah-Hartman [Thu, 13 Jun 2019 11:44:55 +0000 (13:44 +0200)]
vga_switcheroo: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Also, because there is no need to save the file dentry, remove the local
variable and just recursively delete the whole directory when shutting
down.
Cc: Lukas Wunner <lukas@wunner.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613114455.GA13119@kroah.com
Thomas Zimmermann [Thu, 13 Jun 2019 07:30:41 +0000 (09:30 +0200)]
drm: Remove functions with kmap-object argument from GEM VRAM helpers
The GEM VRAM functions with kmap-object argument are not required any
longer. Remove them.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-10-tzimmermann@suse.de
Thomas Zimmermann [Thu, 13 Jun 2019 07:30:40 +0000 (09:30 +0200)]
drm: Remove lock interfaces from GEM VRAM helpers
The lock functions and the locked-pin/unpin functions of GEM VRAM are not
required any longer. Remove them.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-9-tzimmermann@suse.de
Thomas Zimmermann [Thu, 13 Jun 2019 07:30:39 +0000 (09:30 +0200)]
drm/mgag200: Rewrite cursor handling
The cursor handling in mgag200 is complicated to understand. It touches a
number of different BOs, but doesn't really use all of them.
Rewriting the cursor update reduces the amount of cursor state. There are
two BOs for double-buffered HW updates. The source BO updates the one that
is currently not displayed and then switches buffers. Explicit BO locking
has been removed from the code. BOs are simply pinned and unpinned in video
RAM.
v2:
* pin cursor BOs to current location
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-8-tzimmermann@suse.de
Thomas Zimmermann [Thu, 13 Jun 2019 07:30:38 +0000 (09:30 +0200)]
drm/mgag200: Pin framebuffer BO during dirty update
Another explicit lock operation of a GEM VRAM BO is located in mgag200's
framebuffer update code. Instead of locking the BO, we pin it to wherever
it is.
v2:
* update with pin flag of 0
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-7-tzimmermann@suse.de
Thomas Zimmermann [Thu, 13 Jun 2019 07:30:37 +0000 (09:30 +0200)]
drm/ast: Pin framebuffer BO during dirty update
Another explicit lock operation of a GEM VRAM BO is located in AST's
framebuffer update code. Instead of locking the BO, we pin it to wherever
it is.
v2:
* update with pin flag of 0
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-6-tzimmermann@suse.de
Thomas Zimmermann [Thu, 13 Jun 2019 07:30:36 +0000 (09:30 +0200)]
drm/ast: Pin and map cursor source BO during update
The ast driver used to lock the cursor source BO during updates. Locking
should be done internally by the BO's implementation, so we pin it instead
to system memory. The mapping information is also stored in the BO. No
need to have an extra argument to the kmap function.
v2:
* pin cursor BOs to current location
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-5-tzimmermann@suse.de
Thomas Zimmermann [Thu, 13 Jun 2019 07:30:35 +0000 (09:30 +0200)]
drm/ast: Remove obsolete or unused cursor state
The ast driver's data structures store unused or uncecessary cursor
state. Most of the cursor state is already stored elsewhere and can
be retrieved when necessary. Remove the obsolete fields and adapt
users accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-4-tzimmermann@suse.de
Thomas Zimmermann [Thu, 13 Jun 2019 07:30:34 +0000 (09:30 +0200)]
drm/ast: Unpin cursor BO during cleanup
The unpin operation was missing from ast_cursor_fini(). Fixed now.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-3-tzimmermann@suse.de
projects / openwrt / staging / blogic.git / log