drm/i915: Also use new comparative stuff for more ICP+ stuff

I just noticed that initial PCH comparative patch
left some >= PCH_ICP cases behind.

Let's also cover these cases and leave only the pin map
behind now.

No functional change. Hence no fixes tag.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313214307.26573-1-rodrigo.vivi@intel.com

drm/i915: Refactor to common helpers for prepare/finish between reset & wedge

Since both GPU reset and declaring the device wedged suspend ongoing
driver activity around a hard reset, we can reuse the same code to
reduce the likelihood of forgetting details surrounding reset from
either path.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314084432.3740-1-chris@chris-wilson.co.uk

drm/i915/selftests: Disable preemption while setting up fence-timers

The impossible happens and a future fence expired while we were still
initialising. The probable cause is that the test was preempted and we
lost our scheduler cpu slice. Disable preemption during this test to
rule out preemption as a source of timer disruption.

References: https://bugs.freedesktop.org/show_bug.cgi?id=110039
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313205944.5768-1-chris@chris-wilson.co.uk

drm/i915/guc: Preparing for GuC reset along with engine reset

Adding the call to prepare for guc reset along with engine
reset. intel_uc_reset_prepare() calls to disable guc communication
and to sanitize.

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307184445.25895-1-sujaritha.sundaresan@intel.com

drm/i915/icl+: Always use TPS2 or TPS3 when exiting PSR1

When any other value than EDP_PSR_TP4_TIME_0US is set, TPS1 and TPS4
will be used to do the link training when exiting PSR1.
Happily the eDP panels tested so far was able to sync with source
even without HBR3/TPS4 support but let use the right training
pattern.

TPS4 support was added to PSR1 registers because HBR3/PSR
specification was not closed when ICL was freezed so if HBR3 was
supported by PSR, ICL would already be ready but it was not added to
specification so lets always disable TPS4.

v3: Missed ";" SPANK SPANK SPANK!!!

BSpec: 17524

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312195743.8829-3-jose.souza@intel.com

drm/i915/psr: Move logic to get TPS registers values to another function

This will make hsw_activate_psr1() more easy to read and will make
future modification to TPS registers more easy to review and read.

v4: Rename new function to intel_psr1_get_tp_time() (Dhinakaran and
Rodrigo)

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312195743.8829-2-jose.souza@intel.com

drm/i915/vbt: Parse and use the new field with PSR2 TP2/3 wakeup time

A new field with the training pattern(TP) wakeup time for PSR2 was
added to VBT, so lets use it when available otherwise it will
fallback to PSR1 wakeup time.

v2: replacing enum to numerical usec time (Jani)

BSpec: 20131

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312195743.8829-1-jose.souza@intel.com

drm/i915: Start using comparative INTEL_PCH_TYPE

In order to make it easier to bring up new platforms
without having to take care about all corner cases
that was previously taken care for previous platforms
we already use comparative INTEL_GEN statements.

Let's start doing the same with PCH.

The only caveats are:
 - less-than comparisons need to be avoided or done with
   attention and check > PCH_NONE as well.
 - It is not necessarily a chronological order, but a matter
   of south display compatibility/inheritance.

v2: Rebased on top of Jani's clean-up which removed the
    need for less-than comparison

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308214300.25057-3-rodrigo.vivi@intel.com

drm/i915: Move PCH_NOP to -1

So we can later use PCH >= comparisons. The ultimate goal
is to make it easier for us to introduce a new platform
with south display engine on PCH just by reusing the previous
one.

Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308214300.25057-2-rodrigo.vivi@intel.com

drm/i915/gen11+: First assume next platforms will inherit stuff

This exactly same approach was already used from gen9
to gen10 and from gen10 to gen11. Let's also use it
for gen11+.

Let's first assume that we inherit a similar platform
and than we apply the differences on top.

Different from the previous attempts this will be
done this time with coccinelle. We obviously need to
exclude some case that is really exclusive for gen11
like  PCH, Firmware, and few others. Luckly this was
easy to filter by selecting the files we are touching
with coccinelle as exposed below:

spatch -sp_file gen11\+.cocci --in-place i915_perf.c \
       intel_bios.c intel_cdclk.c intel_ddi.c \
       intel_device_info.c intel_display.c intel_dpll_mgr.c \
       intel_dsi_vbt.c intel_hdmi.c intel_mocs.c intel_color.c

@noticelake@ expression e; @@
-!IS_ICELAKE(e)
+INTEL_GEN(e) < 11
@notgen11@ expression e; @@
-!IS_GEN(e, 11)
+INTEL_GEN(e) < 11
@icelake@ expression e; @@
-IS_ICELAKE(e)
+INTEL_GEN(e) >= 11
@gen11@ expression e; @@
-IS_GEN(e, 11)
+INTEL_GEN(e) >= 11

No functional change.

v2: Remove intel_lrc.c per Tvrtko request since those were w/a
    for ICL hw issuea and media related configuration.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308214300.25057-1-rodrigo.vivi@intel.com

drm/i915/bios: assume eDP is present on port A when there is no VBT

We rely on VBT DDI port info for eDP detection on GEN9 platforms and
above. This breaks GEN9 platforms which don't have VBT because port A
eDP now defaults to false. Fix this by defaulting to true when VBT is
missing.

Fixes: a98d9c1d7e9b ("drm/i915/ddi: Rely on VBT DDI port info for eDP detection")
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306200618.17405-1-thomas.preston@codethink.co.uk

drm/i915: Add new ICL PCI ID

A new PCI ID for ICL was added to BSpec, lets keep it in tight sync
as ICL is not protected by the alpha support flag anymore.

v2: Keeping BSpec order(Rodrigo)

BSepc: 21141
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308215646.30436-1-jose.souza@intel.com

drm/i915/selftests: Improve error detection of reset failure

Use a timedwait to promptly detect if the recovery after reset fails and
provide a meaningful debug dump.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312111146.10662-2-chris@chris-wilson.co.uk

drm/i915: Consolidate reset-request debug message

Move the pair of messages to the common callsite where it makes sense to
include a bit more information about which request is being reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312111146.10662-1-chris@chris-wilson.co.uk

Merge tag 'topic/hdr-formats-2019-03-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-intel-next-queued

Add support for Y21x and Y41x to drm core and i915, and P01x support to i915.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f2485309-d645-bed4-95f4-e66ff312aa05@linux.intel.com

Merge drm/drm-next into drm-intel-next-queued

To facilitate merging topic/hdr-formats from Maarten.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/icl: Fix CRC mismatch error for DP link layer compliance

Setting the pixel rounding bit to 1 in PIPE_CHICKEN register allows
to passthrough FB pixels unmodified across pipe. This fixes the failures
for DP link layer compliance tests 4.4.1.1, 4.4.1.2 & 4.4.1.3.
(Lineage #1605353570)

v2: This is also needed to fix failing IGT test case kms_cursor_crc on
ICL.(Mika Kahola)
Make macros consistent with i915_reg.h comments.(Jani Nikula)

Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307021412.18626-1-aditya.swarup@intel.com
References: https://bugs.freedesktop.org/show_bug.cgi?id=103232

drm/i915: Update DRIVER_DATE to 20190311

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Introduce a context barrier callback

In the next patch, we will want to update live state within a context.
As this state may be in use by the GPU and we haven't been explicitly
tracking its activity, we instead attach it to a request we send down
the context setup with its new state and on retiring that request
cleanup the old state as we then know that it is no longer live.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190309160250.29324-1-chris@chris-wilson.co.uk

drm/i915: Suppress the "Failed to idle" warning for gem_eio

It is debatable whether having an error message on suspend for forcibly
cancelling outstanding work is worthwhile. We want to know if it occurs
in the wild (as we will then have to reconsider the approach!), but
equally is not fatal across suspend, as upon resume we automatically
clear the wedged status.

However, CI does trigger this scenario with gem_eio/suspend; as there we
are intentionally wedging the device upon suspend. The dilemma is how
not to trigger a failure report for the dmesg spam, for which the
quickest response is to suppress the warning in the kernel. I'd rather
mark it as accepted in gem_eio, but for now detecting when gem_eio is
playing games and cancelling the warning for that case seems a barely
acceptable hack.

Testcase: igt/gem_eio/suspend
Reference: 5861b013e2c7 ("drm/i915: Do a synchronous switch-to-kernel-context on idling")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308134512.19115-1-chris@chris-wilson.co.uk

drm/i915: Enable PSR2 by default

The support for PSR2 was polished, IGT tests for PSR2 was added and
it was tested performing regular user workloads like browsing,
editing documents and compiling Linux, so it is time to enable it by
default and enjoy even more power-savings.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-9-jose.souza@intel.com

drm/i915: Force PSR1 exit when getting pipe CRC

If PSR1 is active when pipe CRC is enabled the CRC calculations will
be inhibit by the transition to low power states that PSR1 brings.
So lets force a PSR1 exit and as soon as pipe CRC is enabled it will
block PSR1 activation and avoid CRC timeouts when running IGT tests.

There is a little window between the call to force exit PSR and the
write to pipe CRC registers that needs to happen within the minimum
of 6 idles frames otherwise PSR1 will be active again causing the CRC
timeouts but anyways this will at least reduce the occurrence of CRC
timeouts.

This can possibily fix issues present right now but I did not found
any open, I mostly got this issue from previous CI runs of this
series, bellow some exambles:

* igt@kms_color@pipe-b-ctm-0-75:
- shard-apl:          PASS -> FAIL +9

* igt@kms_cursor_legacy@flip-vs-cursor-busy-crc-legacy:
- shard-apl:          PASS -> DMESG-FAIL +17

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-indfb-pgflip-blt:
- shard-kbl:          PASS -> DMESG-FAIL +12

* igt@kms_pipe_crc_basic@read-crc-pipe-c:
- shard-kbl:          PASS -> FAIL +7

v6: s/PSR/PSR1 (Dhinakaran)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-8-jose.souza@intel.com

drm/i915: Drop redundant checks to update PSR state

All of this checks are redudant and can be removed as the if bellow
already takes care when there is no changes in the state.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-7-jose.souza@intel.com

drm/i915: Disable PSR2 while getting pipe CRC

When PSR2 is active aka after the number of frames programmed in
PSR2_CTL 'Frames Before SU Entry' hardware stops to generate CRC
interrupts causing IGT tests to fail due timeout.

This same behavior don't happen with PSR1, as soon as pipe CRC is
enabled it blocks PSR1 activation so CRC calculation continues to
happens normaly.

This patch also set mode_changed as true when PSR is available to
force atomic check functions to compute new PSR state, otherwise PSR2
would not be disabled.

v4: Only setting mode_changed if has_psr is set(Dhinakaran)

v3: Reusing intel_crtc_crc_prepare() and crc_enabled, only setting
mode_changed if it can do PSR.

v2: Changed commit description to describe that PSR2 inhibit CRC
calculations.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-6-jose.souza@intel.com

drm/i915/crc: Make IPS workaround generic

Other features like PSR2 also needs to be disabled while getting CRC
so lets rename ips_force_disable to crc_enabled, drop all this checks
for pipe A and HSW and BDW and make it generic and
hsw_compute_ips_config() will take care of all the checks removed
from here.

v2: Renaming and parameter changes to the functions that prepares the
commit (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-5-jose.souza@intel.com

drm/i915/psr: Drop test for EDP in CRTC when forcing commit

If has_psr is set it means that CRTC has a EDP panel attached so the
EDP check is redundant and can be dropped.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-4-jose.souza@intel.com

drm/i915: Compute and commit color features in fastsets

In any commit, intel_modeset_pipe_config() will initialilly clear
and then recalculate most of the pipe states but it leave intel
specific color features states in reset state.

If after intel_pipe_config_compare() is detected that a fastset is
possible it will mark update_pipe as true and unsed mode_changed,
causing the color features state to be kept in reset state and then
latter being committed to hardware disabling the color features.

This issue can be reproduced by any code patch that duplicates the
actual(with color features already enabled) state and only mark
mode_changed as true.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-3-jose.souza@intel.com

drm/i915/psr: Only lookup for enabled CRTCs when forcing a fastset

Forcing a specific CRTC to the eDP connector was causing the
intel_psr_fastset_force() to mark mode_chaged in the wrong and
disabled CRTC causing no update in the PSR state.

Looks like our internal state track do not clear output_types and
has_psr in the disabled CRTCs, not sure if this is the expected
behavior or not but in the mean time this fix the issue.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-2-jose.souza@intel.com

drm/i915/psr: Remove PSR2 FIXME

Now we are checking sink capabilities when probing PSR DPCD register
and then dynamically checking in if new state is compatible with PSR
in, so this FIXME can be dropped.

Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-1-jose.souza@intel.com

drm/i915: Introduce intel_context.pin_mutex for pin management

Introduce a mutex to start locking the HW contexts independently of
struct_mutex, with a view to reducing the coarse struct_mutex. The
intel_context.pin_mutex is used to guard the transition to and from being
pinned on the gpu, and so is required before starting to build any
request. The intel_context will then remain pinned until the request
completes, but the mutex can be released immediately unpin completion of
pinning the context.

A slight variant of the above is used by per-context sseu that wants to
inspect the pinned status of the context, and requires that it remains
stable (either !pinned or pinned) across its operation. By using the
pin_mutex to serialise operations while pin_count==0, we can take that
pin_mutex for stabilise the boolean pin status.

v2: for Tvrtko!
* Improved commit message.
* Dropped _gpu suffix from gen8_modify_rpcs_gpu.
v3: Repair the locking for sseu selftests

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-7-chris@chris-wilson.co.uk

drm/i915: Track the pinned kernel contexts on each engine

Each engine acquires a pin on the kernel contexts (normal and preempt)
so that the logical state is always available on demand. Keep track of
each engines pin by storing the returned pointer on the engine for quick
access.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-6-chris@chris-wilson.co.uk

drm/i915: Make context pinning part of intel_context_ops

Push the intel_context pin callback down from intel_engine_cs onto the
context itself by virtue of having a central caller for
intel_context_pin() being able to lookup the intel_context itself.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-5-chris@chris-wilson.co.uk

drm/i915: Move over to intel_context_lookup()

In preparation for an ever growing number of engines and so ever
increasing static array of HW contexts within the GEM context, move the
array over to an rbtree, allocated upon first use.

Unfortunately, this imposes an rbtree lookup at a few frequent callsites,
but we should be able to mitigate those by moving over to using the HW
context as our primary type and so only incur the lookup on the boundary
with the user GEM context and engines.

v2: Check for no HW context in guc_stage_desc_init

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-4-chris@chris-wilson.co.uk

drm/i915: Store the intel_context_ops in the intel_engine_cs

If we place a pointer to the engine specific intel_context_ops in the
engine itself, we can assign the ops pointer on initialising the
context, and then rely on it being set. This simplifies the code in
later patches.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-3-chris@chris-wilson.co.uk

drm/i915: Split struct intel_context definition to its own header

This complex struct pulling in half the driver deserves its own
isolation in preparation for intel_context becoming an outright
complicated class of its own.

In order to split this beast into its own header also requests splitting
several of its dependent types and their dependencies into their own
headers as well.

v2: Add standalone compilation tests

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-2-chris@chris-wilson.co.uk

drm/i915: Track active engines within a context

For use in the next patch, if we track which engines have been used by
the HW, we can reduce the work required to flush our state off the HW to
those engines.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308132522.21573-1-chris@chris-wilson.co.uk

drm/i915/dp: use single point of truth for PPS divisor register

Set pp_div field of struct pps_registers to INVALID_MMIO_REG when the
register isn't there, and use i915_mmio_reg_valid() instead of repeating
the condition all over the place.

Use INVALID_MMIO_REG explicitly for documentation purposes, even if the
value is unchanged from 0.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305135215.29862-2-jani.nikula@intel.com

drm/i915/dp: deconflate PPS unlock from divisor register

PPS locking is a thing on pre-DDI, up to and including CPT and PPT.

The PPS divisor register exists up to gen 9 BC, replaced by a field in
the control register starting from gen 9 LP, i.e. BXT, GLK, and CNP on.

Commit b0a08bec9631 ("drm/i915/bxt: eDP Panel Power sequencing") stopped
using the divisor register, but inadvertently conflated the PPS unlock
in the change. No longer doing the unlocking was the right thing to do,
however we should've stopped already at LPT (or DDI platforms).

Deconflate the two.

Arguably this could be moved away from here altogether, but this is the
minimally intrusive change for now.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305135215.29862-1-jani.nikula@intel.com

drm/i915: Remove has-kernel-context

We can no longer assume execution ordering, and in particular we cannot
assume which context will execute last. One side-effect of this is that
we cannot determine if the kernel-context is resident on the GPU, so
remove the routines that claimed to do so.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308093657.8640-4-chris@chris-wilson.co.uk

drm/i915: Reduce presumption of request ordering for barriers

Currently we assume that we know the order in which requests run and so
can determine if we need to reissue a switch-to-kernel-context prior to
idling. That assumption does not hold for the future, so instead of
tracking which barriers have been used, simply determine if we have ever
switched away from the kernel context by using the engine and before
idling ensure that all engines that have been used since the last idle
are synchronously switched back to the kernel context for safety (and
else of shrinking memory while idle).

v2: Use intel_engine_mask_t and ALL_ENGINES

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308093657.8640-3-chris@chris-wilson.co.uk

drm/i915: Refactor common code to load initial power context

We load a context (the kernel context) on both module load and resume in
order to initialise some logical state onto the GPU. We can use the same
routine for both operations, which will become more useful as we
refactor rc6/rps enabling.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308093657.8640-2-chris@chris-wilson.co.uk

drm/i915: Do a synchronous switch-to-kernel-context on idling

When the system idles, we switch to the kernel context as a defensive
measure (no users are harmed if the kernel context is lost). Currently,
we issue a switch to kernel context and then come back later to see if
the kernel context is still current and the system is idle. However,
if we are no longer privy to the runqueue ordering, then we have to
relax our assumptions about the logical state of the GPU and the only
way to ensure that the kernel context is currently loaded is by issuing
a request to run after all others, and wait for it to complete all while
preventing anyone else from issuing their own requests.

v2: Pull wedging into switch_to_kernel_context_sync() but only after
waiting (though only for the same short delay) for the active context to
finish.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308093657.8640-1-chris@chris-wilson.co.uk

drm/i915/selftests: Check preemption support on each engine

Check that we have setup on preemption for the engine before testing,
instead warn if it is not enabled on supported HW.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306142517.22558-28-chris@chris-wilson.co.uk

drm/i915/icl: Prevent incorrect DBuf enabling

Pretend that we have only 1 DBuf slice and that 1 slice is always
enabled, until we have a proper way for on-demand toggling of the second
slice.  Currently we'll try to incorrectly enable DBuf even when all
pipes are disabled and we are already runtime suspended (as the computed
number of DBuf slices will be 1 in that case).

This also means we'll leave the second slice enabled redundantly (except
when suspended), but that's an acceptable tradeoff until we have a
proper solution.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108756
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307103235.23538-1-imre.deak@intel.com

drm/i915/selftests: Improve switch-to-kernel-context checking

We can reduce the switch-to-kernel-context selftest to operate as a loop
and so trivially test another state transition (that of idle->busy).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307211947.6954-1-chris@chris-wilson.co.uk

drm/i915: Read out memory type

We'll need to know the memory type in the system for some
bandwidth limitations and whatnot. Let's read that out on
gen9+.

v2: Rebase
v3: Fix the copy paste fail in the BXT bit definitions (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-13-ville.syrjala@linux.intel.com

drm/i915: Extract DIMM info on cnl+

We'll need information about the memory configuration on cnl+ too.
Extend the code to parse the slightly changed register layout.

v2: Document what cnl_get_dimm_size() returns (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-12-ville.syrjala@linux.intel.com

drm/i915: Clean up intel_get_dram_info() a bit

Remove the pointless zero initialization of bunch of things
(the thing is kzalloc()ed).

Also throw out the mostly useless on-stack string. I think
it'll be clear enough from the logs that 0 means unknown.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-11-ville.syrjala@linux.intel.com

drm/i914: s/l_info/dimm_l/ etc.

Rename the dimm info structs for clarity.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-10-ville.syrjala@linux.intel.com

drm/i915: Generalize intel_is_dram_symmetric()

Decouple intel_is_dram_symmetric() from the raw register values
by comparing just the dram_channel_info structs.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-9-ville.syrjala@linux.intel.com

drm/i915: Use dram_dimm_info more

Reduce the code duplication a bit by sharing the same
code for parsing both DIMMs on a channel.

v2: s/%d/%u/ all over (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-8-ville.syrjala@linux.intel.com

drm/i915: Extract DIMM info on GLK too

The BXT code for parsing DIMM info works for GLK too. Let's
dig it out even if we might not need it immediately.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-7-ville.syrjala@linux.intel.com

drm/i915: Fix DRAM size reporting for BXT

The BXT DUNIT register tells us the size of each DRAM device
in Gb. We want to report the size of the whole DIMM in GB, so
that it matches how we report it for non-LP platforms.

v2: Deobfuscate the math (Chris)
    s/GB/GBIT/ in the register bit definitions (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-6-ville.syrjala@linux.intel.com

drm/i915: Extract BXT DIMM helpers

Polish the bxt DIMM parsing by extracting a few small helpers.

v2: Use struct dram_dimm_info
v3: Document what bxt_get_dimm_size() returns (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-5-ville.syrjala@linux.intel.com

drm/i915: Polish skl_is_16gb_dimm()

Pass the dimm struct to skl_is_16gb_dimm() rather than passing each
value separately. And let's replace the hardcoded set of values with
some simple arithmetic.

Also fix the byte vs. bit inconsistency in the debug message,
and polish the wording otherwise as well.

v2: Deobfuscate the math (Chris)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-4-ville.syrjala@linux.intel.com

drm/i915: Extract functions to derive SKL+ DIMM info

Make the code less repetitive by extracting a few small helpers.

v2: Squash in the switch removal for skl_get_dimm_ranks()
    (it got misplaced in a rebase accident)
    Document what skl_get_dimm_size() returns (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-3-ville.syrjala@linux.intel.com

drm/i915: Store DIMM rank information as a number

Life will be easier later if we have the ranks stored
as a bare number.

v2: s/%d/%u/ all over (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306203551.24592-2-ville.syrjala@linux.intel.com

drm/i915/icl: Remove alpha support protection

Now with the watermarks fixes merged, Icelake is stable enough to
have the alpha support protection flag removed.

We have a few ICL machines in our CI and it is mostly green with
failures in tests that will not impact future linux installations.
Also there is no warnings, errors, flickering or any visual defects
while doing ordinary tasks like browsing and editing documents in a
dual monitor setup.

As a reminder i915.alpha_support was created to protect
future linux installation's iso images that might contain a
kernel from the enabling time of the new platform. Without this
protection most of linux installation was recommending
nomodeset option during installation that was getting stick
there after installation.

Specifically, alpha support says nothing about the development
state of the hardware, and everything about the state of the
driver in a kernel release.

This is semantically no different from the old
preliminary_hw_support flag, but the old one was all too often
interpreted as (preliminary hw) support instead of the intended
(preliminary) hw support, and it was misleading for everyone.
Hence the rename.

Reference: https://intel-gfx-ci.01.org/tree/drm-tip/fi-icl-y.html
Reference: https://intel-gfx-ci.01.org/tree/drm-tip/shard-iclb.html
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305221153.359-1-jose.souza@intel.com

drm/i915: Force GPU idle on suspend

To facilitate the next patch to allow preemptible kernels not to incur
the wrath of hangcheck, we need to ensure that we can still suspend and
shutdown. That is we will not be able to rely on hangcheck to terminate
a blocking kernel and instead must manually do so ourselves. The
advantage is that we can apply more pressure!

As we now perform a GPU reset to clean up any residual kernels, we leave
the GPU in an unknown state and in particular can not talk to the GuC
before we reinitialise it following resume. For example, we no longer
need to tell the GuC to suspend itself, as it is already reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307104530.21745-2-chris@chris-wilson.co.uk

drm/i915: Make I915_GEM_IDLE_TIMEOUT into a macro

Currently we use HZ/5 for detecting a dead gpu on startup, and we will
wish to reuse this value for detecting a dead gpu on suspend, so convert
it into a macro for later convenience.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307104530.21745-1-chris@chris-wilson.co.uk

drm/i915: Populate pipe_offsets[] & co. accurately

At some point people have started to assume that
pipe_offsets[] & co. are only populated for pipes and whatnot
that actually exist. That is in fact not currently true, but
we can easily make it so.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305192905.7140-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Simplify i830 DVO 2x clock handling

Let's just always enable the DVO 2x clock on i830. This way we don't
have to track if DVO is being used or not. The spec does suggest we
should disable the clock when it isn't needed, but this does appear
to work just fine.

This removes another crtc->config usage.

v2: Split the DPLL enable sequence change to a separate patch

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305192400.23121-2-ville.syrjala@linux.intel.com

drm/i915: Do not temporarily disable the DPLL on i830

The current code clears the DPLL register entirely when re-enabling
VGA mode temporarily during the DPLL enable sequence. On i830 we want to
keep the DPLLs on all the time, so let's not do this temporary
disabling.

The current code does work, so this doesn't seem super important.
But I prefer that we make the behaviour 100% consistent.

v2: Split this change the DVO 2x clocking patch

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305192400.23121-1-ville.syrjala@linux.intel.com

drm/i915: Relax mmap VMA check

Legacy behaviour was to allow non-page-aligned mmap requests, as does the
linux mmap(2) implementation by virtue of automatically rounding up for
the caller.

To avoid breaking legacy userspace relax the newly introduced fix.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 5c4604e757ba ("drm/i915: Prevent a race during I915_GEM_MMAP ioctl with WC set")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Adam Zabrocki <adamza@microsoft.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Cc: Akash Goel <akash.goel@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305110409.28633-1-tvrtko.ursulin@linux.intel.com

drm/i915/selftests: Upgrade printing test/subtest name to pr_info

We're using pr_debug for things that we don't really want to see in the
CI log, but we may find useful during test development.
Let's upgrade the test name printer - we do want to see those in CI log.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305144717.10000-1-michal.winiarski@intel.com

drm/i915/selftests: Fix MI_STORE_DWORD_IMM alignment

MI_STORE_DWORD_IMM wants to write into a dword-aligned (4B) address, we
mistakenly cleared bit2 and not bits 0 and 1.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306082447.21563-1-chris@chris-wilson.co.uk

drm/i915: Pass around the intel_context

Instead of passing the gem_context and engine to find the instance of
the intel_context to use, pass around the intel_context instead. This is
useful for the next few patches, where the intel_context is no longer a
direct lookup.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306084704.15755-1-chris@chris-wilson.co.uk

drm/i915: Use i915_global_register()

Rather than manually add every new global into each hook, use
i915_global_register() function and keep a list of registered globals to
invoke instead.

However, I haven't found a way for random drivers to add an .init table
to avoid having to manually add ourselves to i915_globals_init() each
time.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305213830.18094-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/icl: Default to Thread Group preemption for compute workloads

We assumed that the default preemption granularity is fine for ICL.
Unfortunately, it turns out that some drivers don't support mid-thread
preemption for compute workloads.
If a workload that doesn't support mid-thread preemption gets mid-thread
preempted, we're going to observe a GPU hang.
While I'm here, let's also update the "workaround" naming.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Anuj Phogat <anuj.phogat@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Tested-by: Anuj Phogat <anuj.phogat@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305124827.23446-1-michal.winiarski@intel.com

drm/i915: Move find_active_request() to the engine

To find the active request, we need only search along the individual
engine for the right request. This does not require touching any global
GEM state, so move it into the engine compartment.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305180332.30900-3-chris@chris-wilson.co.uk

drm/i915/gtt: Mark ALL_ENGINES as dirty on ppGTT modification

Small simplification to set all bits in the dirty mask rather than
lookup the exact mask of populated engines. The bits for the engines
that do not exist are unused and so can safely set and then ignored.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305180332.30900-2-chris@chris-wilson.co.uk

drm/i915: Store the BIT(engine->id) as the engine's mask

In the next patch, we are introducing a broad virtual engine to encompass
multiple physical engines, losing the 1:1 nature of BIT(engine->id). To
reflect the broader set of engines implied by the virtual instance, lets
store the full bitmask.

v2: Use intel_engine_mask_t (s/ring_mask/engine_mask/)
v3: Tvrtko voted for moah churn so teach everyone to not mention ring
and use $class$instance throughout.
v4: Comment upon the disparity in bspec for using VCS1,VCS2 in gen8 and
VCS[0-4] in later gen. We opt to keep the code consistent and use
0-index naming throughout.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305180332.30900-1-chris@chris-wilson.co.uk

drm/i915: Remove last traces of exec-id (GEM_BUSY)

As we allow per-context engine allows the legacy concept of
I915_EXEC_RING no longer applies universally. We are still exposing the
unrelated exec-id in GEM_BUSY, so transition this ioctl (once more
slightly changing its ABI, but no one cares) over to only reporting the
uabi-class (not instance as we can not foreseeably fit those into the
small bitmask).

The only user of the extended ring information from GEM_BUSY is ddx/sna,
which tries to use the non-rcs business information to guide which
engine to use for subsequent operations on foreign bo. All that matters
for it is the decision between rcs and !rcs, so it is unaffected by the
change in higher bits.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305162643.20243-1-chris@chris-wilson.co.uk

drm/i915: Stop capturing semaphore registers for gen6/7 GPU hangs

We no longer use the semaphore sync registers on gen6/7, so including
them in the GPU error state is mere noise.

References: 6faf5916e6be ("drm/i915: Remove HW semaphores for gen7 inter-engine synchronisation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305150914.11340-2-chris@chris-wilson.co.uk

drm/i915: Just check the vebox IIR regardless

As we don't unmask and enable the vebox interrupts if the engine is not
being used, we will never generate the vebox interrupts as part of the
IIR and so can unconditionally check IIR without fear of chasing into
the vebox.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305150914.11340-1-chris@chris-wilson.co.uk

drm/i915/gtt: Store scratch page size alongside not in the common struct

As the scratch page is the only one to be allocated with variable size,
rather than keep an unused slot in all i915_page_table structs, store it
alongside the vm->scratch_page.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305135430.4948-1-chris@chris-wilson.co.uk

drm/i915/icl: Enabling Y2xx and Y4xx (xx:10/12/16) formats for universal planes

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1551700595-21481-7-git-send-email-swati2.sharma@intel.com

drm/i915/icl: Add Y2xx and Y4xx (xx:10/12/16) plane control definitions

Added needed plane control flag definitions for Y2xx and Y4xx (10, 12 and
16 bits)

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1551700595-21481-6-git-send-email-swati2.sharma@intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm: Add Y2xx and Y4xx (xx:10/12/16) format definitions and fourcc

The following pixel formats are packed format that follows 4:2:2
chroma sampling. For memory represenation each component is
allocated 16 bits each. Thus each pixel occupies 32bit.

Y210: For each component, valid data occupies MSB 10 bits.
LSB 6 bits are filled with zeroes.
Y212: For each component, valid data occupies MSB 12 bits.
LSB 4 bits are filled with zeroes.
Y216: For each component valid data occupies 16 bits,
doesn't require any padding bits.

First 16 bits stores the Y value and the next 16 bits stores one
of the chroma samples alternatively. The first luma sample will
be accompanied by first U sample and second luma sample is
accompanied by the first V sample.

The following pixel formats are packed format that follows 4:4:4
chroma sampling. Channels are arranged in the order UYVA in
increasing memory order.

Y410: Each color component occupies 10 bits and X component
takes 2 bits, thus each pixel occupies 32 bits.
Y412:   Each color component is 16 bits where valid data
occupies MSB 12 bits. LSB 4 bits are filled with zeroes.
Thus, each pixel occupies 64 bits.
Y416:   Each color component occupies 16 bits for valid data,
doesn't require any padding bits. Thus, each pixel
occupies 64 bits.

v3: fixed missing tab for XYUV8888 (JP)

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1551700595-21481-5-git-send-email-swati2.sharma@intel.com

drm/i915: Enable P010, P012, P016 formats for primary and sprite planes

Enabling of P010, P012 and P016 formats. These formats will
extend NV12 for larger bit depths.

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1551700595-21481-4-git-send-email-swati2.sharma@intel.com

drm/i915: Preparations for enabling P010, P012, P016 formats

Preparations for enabling P010, P012 and P016 formats. These
formats will extend NV12 for larger bit depths.

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1551700595-21481-3-git-send-email-swati2.sharma@intel.com

drm/i915: Add P010, P012, P016 plane control definitions

Add needed plane control flag definitions for P010, P012 and
P016 formats.

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1551700595-21481-2-git-send-email-swati2.sharma@intel.com

drm/i915/gtt: Use optimised memset32/64 for clearing PTE

Replace the open-coded memset loops with the memset32/64 routines that
reduce to a single instruction or two:

add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-83 (-83)
Function                                     old     new   delta
gen6_ppgtt_clear_range                       371     344     -27
gen8_ppgtt_clear_pd                          575     519     -56

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190304230646.23714-1-chris@chris-wilson.co.uk

drm/i915: Fix bit name in PP_STATUS register

According to the spec PP_SEQUENCE_STATE_ON_S1_1 is the correct name, so
just rename it.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190302011405.6405-1-lucas.demarchi@intel.com

drm/i915: allow platforms without eDP transcoder

Define a HAS_TRANSCODER_EDP() macro that checks if we have defined an
offset for this transcoder. This allows platforms to be defined without
eDP transcoder.

Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190222230254.20351-2-lucas.demarchi@intel.com

drm/i915: refactor transcoders reporting on error state

Instead of keeping track of the number of transcoders, loop through all
the interesting ones and check if there is a correspondent offset.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190222230254.20351-1-lucas.demarchi@intel.com

drm/i915: Forcing a modeset when resetting HDMI link

With fastboot enabled in gen9+ it broke the HDMI reset as just
setting mode_changed to true causes a fastset and here we want a full
modeset that will disable and then enable the encoder of this HDMI
link actually, so setting connectors_changed instead that will cause
modeset as desired.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190302003349.19189-3-jose.souza@intel.com

drm/i915: Don't manually add connectors and planes state

drm_atomic_commit() call chain already takes care of adding
connectors and planes, so lets no add then manually if not changing
their states.

drm_atomic_commit()
        drm_atomic_check_only()
                config->funcs->atomic_check()/intel_atomic_check()
                        drm_atomic_helper_check()
                                drm_atomic_helper_check_modeset()
                                        for_each_oldnew_crtc_in_state()
                                                drm_atomic_add_affected_connectors()
                                                drm_atomic_add_affected_planes()

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190302003349.19189-2-jose.souza@intel.com

drm/i915: Fix atomic state leak when resetting HDMI link

Atomic state needs to be put even if the commit was successful.

Fixes: dba14b27dd3c ("drm/i915: Reinitialize sink scrambling/TMDS clock ratio on HPD")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190302003349.19189-1-jose.souza@intel.com

Merge tag 'drm-misc-fixes-2019-02-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-fixes for v5.0:
- Block fb changes for async atomic updates to prevent a use after free.
- Fix ID mismatch error on load in bochs.
- Fix memory leak when drm_setup fails.
- Fixes around handling of DRM_AUTH.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/42113611-e2cd-6bdd-7de5-4f8ab5a0cbe6@linux.intel.com

drm/amd/display: Use vrr friendly pageflip throttling in DC.

In VRR mode, keep track of the vblank count of the last
completed pageflip in amdgpu_crtc->last_flip_vblank, as
recorded in the pageflip completion handler after each
completed flip.

Use that count to prevent mmio programming a new pageflip
within the same vblank in which the last pageflip completed,
iow. to throttle pageflips to at most one flip per video
frame, while at the same time allowing to request a flip
not only before start of vblank, but also anywhere within
vblank.

The old logic did the same, and made sense for regular fixed
refresh rate flipping, but in vrr mode it prevents requesting
a flip anywhere inside the possibly huge vblank, thereby
reducing framerate in vrr mode instead of improving it, by
delaying a slightly delayed flip requests up to a maximum
vblank duration + 1 scanout duration. This would limit VRR
usefulness to only help applications with a very high GPU
demand, which can submit the flip request before start of
vblank, but then have to wait long for fences to complete.

With this method a flip can be both requested and - after
fences have completed - executed, ie. it doesn't matter if
the request (amdgpu_dm_do_flip()) gets delayed until deep
into the extended vblank due to cpu execution delays. This
also allows clients which want to regulate framerate within
the vrr range a much more fine-grained control of flip timing,
a feature that might be useful for video playback, and is
very useful for neuroscience/vision research applications.

In regular non-VRR mode, retain the old flip submission
behavior. This to keep flip scheduling for fullscreen X11/GLX
OpenGL clients intact, if they use the GLX_OML_sync_control
extensions glXSwapBufferMscOML(, ..., target_msc,...) function
with a specific target_msc target vblank count.

glXSwapBuffersMscOML() or DRI3/Present PresentPixmap() will
not flip at the proper target_msc for a non-zero target_msc
if VRR mode is active with this patch. They'd often flip one
frame too early. However, this limitation should not matter
much in VRR mode, as scheduling based on vblank counts is
pretty futile/unusable under variable refresh duration
anyway, so no real extra harm is done.

According to some testing already done with this patch by
Nicholas on top of my tests, IGT tests didn't report any
problems. If fixes stuttering and flickering when flipping
at rates below the minimum vrr refresh rate.

Fixes: bb47de736661 ("drm/amdgpu: Set FreeSync state using drm VRR
properties")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel@daenzer.net>
Tested-by: Bruno Filipe <bmilreu@gmail.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/i915: Fix the state checker for ICL Y planes

The plane used to scan out NV12 luma on ICL is logically
off but actually on. Fix the state checker to account for this.

Cc: Imre Deak <imre.deak@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109457
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190304131217.4338-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Yet another if/else sort of newer to older platforms.

No functional change. Just a reorg to match the preferred
behavior.

When rebasing internal branch on top of latest sort I noticed
few more cases that needs to get reordered.

Let's do in a bundle this time and hoping there's no other
missing places.

v2: Check for HSW/BDW ULT before generic IS_HASWELL or
    IS_BROADWELL or it doesn't work as pointed by Ville.
    But also ULT came afterwards anyway.
v3: Accepting suggestions from Lucas:
    Sort CNL/CFL, KBL/SKL, and use <= 8 removing chv and bdw.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301172703.12139-1-rodrigo.vivi@intel.com

drm/i915: Acquire breadcrumb ref before cancelling

We may race the interrupt signaling with retirement, in which case the
order in which we acquire the reference inside the interrupt is vital to
provide the correct barrier against the request being freed in
retirement, i.e. we need to acquire our reference before marking the
breadcrumb as cancelled (as soon as the breadcrumb is cancelled
retirement may drop its reference to the request without serialisation
with the interrupt handler).

<3>[  683.372226] BUG i915_request (Tainted: G     U           ): Object already free
<3>[  683.372269] -----------------------------------------------------------------------------

<4>[  683.372323] Disabling lock debugging due to kernel taint
<3>[  683.372393] INFO: Allocated in i915_request_alloc+0x169/0x810 [i915] age=0 cpu=2 pid=1420
<3>[  683.372412]  kmem_cache_alloc+0x21c/0x280
<3>[  683.372478]  i915_request_alloc+0x169/0x810 [i915]
<3>[  683.372540]  i915_gem_do_execbuffer+0x84e/0x1ae0 [i915]
<3>[  683.372603]  i915_gem_execbuffer2_ioctl+0x11b/0x420 [i915]
<3>[  683.372617]  drm_ioctl_kernel+0x83/0xf0
<3>[  683.372626]  drm_ioctl+0x2f3/0x3b0
<3>[  683.372636]  do_vfs_ioctl+0xa0/0x6e0
<3>[  683.372645]  ksys_ioctl+0x35/0x60
<3>[  683.372654]  __x64_sys_ioctl+0x11/0x20
<3>[  683.372664]  do_syscall_64+0x55/0x190
<3>[  683.372675]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
<3>[  683.372740] INFO: Freed in i915_request_retire_upto+0xfb/0x2e0 [i915] age=0 cpu=0 pid=1419
<3>[  683.372807]  i915_request_retire_upto+0xfb/0x2e0 [i915]
<3>[  683.372870]  i915_request_add+0x3bd/0x9d0 [i915]
<3>[  683.372931]  i915_gem_do_execbuffer+0x141c/0x1ae0 [i915]
<3>[  683.372991]  i915_gem_execbuffer2_ioctl+0x11b/0x420 [i915]
<3>[  683.373001]  drm_ioctl_kernel+0x83/0xf0
<3>[  683.373008]  drm_ioctl+0x2f3/0x3b0
<3>[  683.373015]  do_vfs_ioctl+0xa0/0x6e0
<3>[  683.373023]  ksys_ioctl+0x35/0x60
<3>[  683.373030]  __x64_sys_ioctl+0x11/0x20
<3>[  683.373037]  do_syscall_64+0x55/0x190
<3>[  683.373045]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
<3>[  683.373054] INFO: Slab 0x0000000079bcdd71 objects=30 used=2 fp=0x000000006d77b8af flags=0x8000000000010201
<3>[  683.373069] INFO: Object 0x000000006d77b8af @offset=24000 fp=0x000000007b061eab

<3>[  683.373083] Redzone 00000000ee47ef28: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
<3>[  683.373097] Redzone 000000000cb91471: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
<3>[  683.373111] Redzone 00000000cf2b86ee: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
<3>[  683.373125] Redzone 00000000f1f5a2cd: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
<3>[  683.373139] Object 000000006d77b8af: 00 00 00 00 5a 5a 5a 5a 00 3c 49 c0 ff ff ff ff  ....ZZZZ.<I.....
<3>[  683.373153] Object 000000006f9b6204: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373167] Object 0000000091410ffb: e0 dd 6b fa 87 9f ff ff e0 dd 6b fa 87 9f ff ff  ..k.......k.....
<3>[  683.373181] Object 000000004cdf799d: 20 de 6b fa 87 9f ff ff 3d 00 00 00 00 00 00 00   .k.....=.......
<3>[  683.373195] Object 00000000545afebc: aa b3 00 00 00 00 00 00 0f 00 00 00 00 00 00 00  ................
<3>[  683.373209] Object 00000000e4a394a8: 25 bd bd 1b 9f 00 00 00 00 00 00 00 5a 5a 5a 5a  %...........ZZZZ
<3>[  683.373223] Object 0000000029a7878a: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a  .....N......ZZZZ
<3>[  683.373237] Object 00000000d37797b3: ff ff ff ff ff ff ff ff e8 6e 57 c0 ff ff ff ff  .........nW.....
<3>[  683.373251] Object 00000000d50414f6: 00 b3 c8 8e ff ff ff ff 80 b0 c8 8e ff ff ff ff  ................
<3>[  683.373265] Object 00000000c28e8847: 41 01 4b c0 ff ff ff ff 00 00 88 8e 88 9f ff ff  A.K.............
<3>[  683.373279] Object 00000000c74212ab: 38 c1 6d 8a 88 9f ff ff 58 21 74 8a 88 9f ff ff  8.m.....X!t.....
<3>[  683.373293] Object 000000000d8012cf: c0 c1 6d 8a 88 9f ff ff 58 79 dd d9 87 9f ff ff  ..m.....Xy......
<3>[  683.373306] Object 00000000c9900b91: 98 d0 4e 8a 88 9f ff ff 58 3c e8 9b 88 9f ff ff  ..N.....X<......
<3>[  683.373320] Object 0000000044bb8c3d: 58 3c e8 9b 88 9f ff ff 64 f5 04 00 00 00 00 00  X<......d.......
<3>[  683.373334] Object 00000000180c4cca: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a  .....N......ZZZZ
<3>[  683.373348] Object 00000000c9044498: ff ff ff ff ff ff ff ff e0 6e 57 c0 ff ff ff ff  .........nW.....
<3>[  683.373362] Object 0000000072d0dfb3: 00 00 00 00 00 00 00 00 c0 b1 c8 8e ff ff ff ff  ................
<3>[  683.373376] Object 0000000081f198b9: 55 01 4b c0 ff ff ff ff d8 de 6b fa 87 9f ff ff  U.K.......k.....
<3>[  683.373390] Object 000000006a375a13: d8 de 6b fa 87 9f ff ff cc 05 39 c0 ff ff ff ff  ..k.......9.....
<3>[  683.373404] Object 00000000b8392dd1: ff ff ff ff 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ....ZZZZZZZZZZZZ
<3>[  683.373418] Object 00000000e5c1bbcb: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373432] Object 00000000199feccd: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373446] Object 0000000020f5e08b: 20 df 6b fa 87 9f ff ff 20 df 6b fa 87 9f ff ff   .k..... .k.....
<3>[  683.373460] Object 0000000090591b0f: 30 df 6b fa 87 9f ff ff 30 df 6b fa 87 9f ff ff  0.k.....0.k.....
<3>[  683.373473] Object 00000000232f7cd0: 40 df 6b fa 87 9f ff ff 40 df 6b fa 87 9f ff ff  @.k.....@.k.....
<3>[  683.373487] Object 0000000060458027: 50 df 6b fa 87 9f ff ff 50 df 6b fa 87 9f ff ff  P.k.....P.k.....
<3>[  683.373501] Object 00000000e3c82ce2: 06 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a  ........ZZZZZZZZ
<3>[  683.373515] Object 00000000ec804eb8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373529] Object 00000000ce7ccc08: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373543] Object 000000002dbc575c: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373557] Object 00000000b86d3417: 5a 5a 5a 5a 5a 5a 5a 5a 00 de 6b fa 87 9f ff ff  ZZZZZZZZ..k.....
<3>[  683.373571] Object 00000000d1e82276: b8 61 dd d9 87 9f ff ff a0 06 00 00 d0 06 00 00  .a..............
<3>[  683.373585] Object 00000000cc53f969: e8 06 00 00 20 07 00 00 28 07 00 00 00 00 00 00  .... ...(.......
<3>[  683.373599] Object 00000000ea2426d2: 40 0c 8c 7b 88 9f ff ff 00 00 00 00 00 00 00 00  @..{............
<3>[  683.373613] Object 00000000b860c1c3: 68 0d 8c 7b 88 9f ff ff 68 25 8c 7b 88 9f ff ff  h..{....h%.{....
<3>[  683.373627] Object 0000000016455ea0: 96 d5 05 00 01 00 00 00 00 5a 5a 5a 5a 5a 5a 5a  .........ZZZZZZZ
<3>[  683.373640] Object 00000000e66ede82: 00 e0 6b fa 87 9f ff ff 00 e0 6b fa 87 9f ff ff  ..k.......k.....
<3>[  683.373654] Object 0000000080964939: 10 e0 6b fa 87 9f ff ff 10 e0 6b fa 87 9f ff ff  ..k.......k.....
<3>[  683.373668] Object 00000000e7ffc5dd: 00 00 00 00 00 00 00 00 00 01 00 00 00 00 ad de  ................
<3>[  683.373682] Object 000000000ce9d6ca: 00 02 00 00 00 00 ad de 5a 5a 5a 5a 5a 5a 5a 5a  ........ZZZZZZZZ
<3>[  683.373696] Object 00000000386659d0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373710] Redzone 0000000075d2069d: bb bb bb bb bb bb bb bb                          ........
<3>[  683.373723] Padding 0000000054e14c6b: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373737] Padding 00000000425e5b34: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<3>[  683.373751] Padding 00000000ad3d4db9: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a  ZZZZZZZZZZZZZZZZ
<4>[  683.373767] CPU: 1 PID: 151 Comm: kworker/1:2 Tainted: G    BU            5.0.0-rc8-g39139489403b-drmtip_236+ #1
<4>[  683.373769] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake Y LPDDR4x T4 RVP TLC, BIOS ICLSFWR1.R00.3087.A00.1902250334 02/25/2019
<4>[  683.373773] Workqueue: events delayed_fput
<4>[  683.373775] Call Trace:
<4>[  683.373777]  <IRQ>
<4>[  683.373781]  dump_stack+0x67/0x9b
<4>[  683.373783]  free_debug_processing+0x344/0x370
<4>[  683.373832]  ? intel_engine_breadcrumbs_irq+0x2e4/0x380 [i915]
<4>[  683.373836]  __slab_free+0x337/0x4f0
<4>[  683.373840]  ? _raw_spin_unlock_irqrestore+0x39/0x60
<4>[  683.373844]  ? debug_check_no_obj_freed+0x132/0x210
<4>[  683.373889]  ? intel_engine_breadcrumbs_irq+0x2e4/0x380 [i915]
<4>[  683.373892]  ? kmem_cache_free+0x275/0x2e0
<4>[  683.373894]  kmem_cache_free+0x275/0x2e0
<4>[  683.373939]  intel_engine_breadcrumbs_irq+0x2e4/0x380 [i915]
<4>[  683.373984]  gen8_cs_irq_handler+0x4e/0xa0 [i915]
<4>[  683.374026]  gen11_irq_handler+0x24b/0x330 [i915]
<4>[  683.374032]  __handle_irq_event_percpu+0x41/0x2d0
<4>[  683.374034]  ? handle_irq_event+0x27/0x50
<4>[  683.374038]  handle_irq_event_percpu+0x2b/0x70
<4>[  683.374040]  handle_irq_event+0x2f/0x50
<4>[  683.374044]  handle_edge_irq+0xe7/0x190
<4>[  683.374048]  handle_irq+0x67/0x160
<4>[  683.374051]  do_IRQ+0x5e/0x130
<4>[  683.374054]  common_interrupt+0xf/0xf

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109827
Fixes: 52c0fdb25c7c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190304114113.371-1-chris@chris-wilson.co.uk

Merge v5.0 into drm-next

There is a really hairy resolution involving amdgpu fixes, that I'd rather confirm here.

Also some misc fixes are landed by me, but the pr has them as well.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Linux 5.0

Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "One more set of simple ARM platform fixes:

   - A boot regression on qualcomm msm8998

   - Gemini display controllers got turned off by accident

   - incorrect reference counting in optee"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  tee: optee: add missing of_node_put after of_device_is_available
  arm64: dts: qcom: msm8998: Extend TZ reserved memory area
  ARM: dts: gemini: Re-enable display controller

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "Two last minute fixes:

   - Prevent value evaluation via functions happening in the user access
     enabled region of __put_user() (put another way: make sure to
     evaluate the value to be stored in user space _before_ enabling
     user space accesses)

   - Correct the definition of a Hyper-V hypercall constant"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/hyper-v: Fix definition of HV_MAX_FLUSH_REP_COUNT
  x86/uaccess: Don't leak the AC flag into __put_user() value evaluation

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Nine small fixes.

  The resume fix is a cosmetic removal of a warning with an incorrect
  condition causing it to alarm people wrongly.

  The other eight patches correct a thinko in Christoph Hellwig's DMA
  conversion series. Without it all these drivers end up with 32 bit DMA
  masks meaning they bounce any page over 4GB before sending it to the
  controller.

  Nowadays, even laptops mostly have memory above 4GB, so this can lead
  to significant performance degradation with all the bouncing"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: core: Avoid that system resume triggers a kernel warning
  scsi: hptiop: fix calls to dma_set_mask()
  scsi: hisi_sas: fix calls to dma_set_mask_and_coherent()
  scsi: csiostor: fix calls to dma_set_mask_and_coherent()
  scsi: bfa: fix calls to dma_set_mask_and_coherent()
  scsi: aic94xx: fix calls to dma_set_mask_and_coherent()
  scsi: 3w-sas: fix calls to dma_set_mask_and_coherent()
  scsi: 3w-9xxx: fix calls to dma_set_mask_and_coherent()
  scsi: lpfc: fix calls to dma_set_mask_and_coherent()

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix refcount leak in act_ipt during replace, from Davide Caratti.

 2) Set task state properly in tun during blocking reads, from Timur
    Celik.

 3) Leaked reference in DSA, from Wen Yang.

 4) NULL deref in act_tunnel_key, from Vlad Buslov.

 5) cipso_v4_erro can reference the skb IPCB in inappropriate contexts
    thus referencing garbage, from Nazarov Sergey.

 6) Don't accept RTA_VIA and RTA_GATEWAY in contexts where those
    attributes make no sense.

 7) Fix hung sendto in tipc, from Tung Nguyen.

 8) Out-of-bounds access in netlabel, from Paul Moore.

 9) Grant reference leak in xen-netback, from Igor Druzhinin.

10) Fix tx stalls with lan743x, from Bryan Whitehead.

11) Fix interrupt storm with mv88e6xxx, from Hein Kallweit.

12) Memory leak in sit on device registry failure, from Mao Wenan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
  net: sit: fix memory leak in sit_init_net()
  net: dsa: mv88e6xxx: Fix statistics on mv88e6161
  geneve: correctly handle ipv6.disable module parameter
  net: dsa: mv88e6xxx: prevent interrupt storm caused by mv88e6390x_port_set_cmode
  bpf: fix sanitation rewrite in case of non-pointers
  ipv4: Add ICMPv6 support when parse route ipproto
  MIPS: eBPF: Fix icache flush end address
  lan743x: Fix TX Stall Issue
  net: phy: phylink: fix uninitialized variable in phylink_get_mac_state
  net: aquantia: regression on cpus with high cores: set mode with 8 queues
  selftests: fixes for UDP GRO
  bpf: drop refcount if bpf_map_new_fd() fails in map_create()
  net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X
  net: dsa: mv88e6xxx: Fix u64 statistics
  xen-netback: don't populate the hash cache on XenBus disconnect
  xen-netback: fix occasional leak of grant ref mappings under memory pressure
  sctp: chunk.c: correct format string for size_t in printk
  net: netem: fix skb length BUG_ON in __skb_to_sgvec
  netlabel: fix out-of-bounds memory accesses
  ipv4: Pass original device to ip_rcv_finish_core
  ...