git.openwrt.org Git - openwrt/staging/blogic.git/log

mac80211: make ieee80211_schedule_txq schedule empty TXQs

Currently there is no way for the driver to signal to mac80211 that it should
schedule a TXQ even if there are no packets on the mac80211 part of that queue.
This is problematic if the driver has an internal retry queue to deal with
software A-MPDU retry.

This patch changes the behavior of ieee80211_schedule_txq to always schedule
the queue, as its only user (ath9k) seems to expect such behavior already:
it calls this function on tx status and on powersave wakeup whenever its
internal retry queue is not empty.

Also add an extra argument to ieee80211_return_txq to get the same behavior.

This fixes an issue on ath9k where tx queues with packets to retry (and no
new packets in mac80211) would not get serviced.

Fixes: 89cea7493a346 ("ath9k: Switch to mac80211 TXQ scheduling and airtime APIs")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211_hwsim: calculate if_combination.max_interfaces

If we just set this to 2048, and have multiple limits you
can select from, the total number might run over and cause
a warning in cfg80211. This doesn't make sense, so we just
calculate the total max_interfaces now.

Reported-by: syzbot+8f91bd563bbff230d0ee@syzkaller.appspotmail.com
Fixes: 99e3a44bac37 ("mac80211_hwsim: allow setting iftype support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: add ratelimited variants of err and warn

wiphy_{err,warn}_ratelimited will be used by rt2x00

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: rework locking for txq scheduling / airtime fairness

Holding the lock around the entire duration of tx scheduling can create
some nasty lock contention, especially when processing airtime information
from the tx status or the rx path.
Improve locking by only holding the active_txq_lock for lookups / scheduling
list modifications.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

nl80211: Add NL80211_FLAG_CLEAR_SKB flag for other NL commands

This commit adds NL80211_FLAG_CLEAR_SKB flag to other NL commands
that carry key data to ensure they do not stick around on heap
after the SKB is freed.

Also introduced this flag for NL80211_CMD_VENDOR as there are sub
commands which configure the keys.

Signed-off-by: Sunil Dutt <usdutt@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: Use kmemdup in cfg80211_gen_new_ie()

Use kmemdup rather than duplicating its implementation

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: do not call driver wake_tx_queue op during reconfig

There are several scenarios in which mac80211 can call drv_wake_tx_queue
after ieee80211_restart_hw has been called and has not yet completed.
Driver private structs are considered uninitialized until mac80211 has
uploaded the vifs, stations and keys again, so using private tx queue
data during that time is not safe.

The driver can also not rely on drv_reconfig_complete to figure out when
it is safe to accept drv_wake_tx_queue calls again, because it is only
called after all tx queues are woken again.

To fix this, bail out early in drv_wake_tx_queue if local->in_reconfig
is set.

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: Change an 'else if' into an 'else' in cfg80211_calculate_bitrate_he

When building with -Wsometimes-uninitialized, Clang warns:

net/wireless/util.c:1223:11: warning: variable 'result' is used
uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]

Clang can't evaluate at this point that WARN(1, ...) always returns true
because __ret_warn_on is defined as !!(condition), which isn't
immediately evaluated as 1. Change this branch to else so that it's
clear to Clang that we intend to bail out here.

Link: https://github.com/ClangBuiltLinux/linux/issues/382
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: fix memory accounting with A-MSDU aggregation

skb->truesize can change due to memory reallocation or when adding extra
fragments. Adjust fq->memory_usage accordingly

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

cfg80211: Handle WMM rules in regulatory domain intersection

The support added for regulatory WMM rules did not handle
the case of regulatory domain intersections. Fix it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Fixes: 230ebaa189af ("cfg80211: read wmm rules from regulatory database")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: Increase MAX_MSG_LEN

Looks that 100 chars isn't enough for messages, as we keep getting
warnings popping from different places due to message shortening.
Instead of trying to shorten the prints, just increase the buffer size.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: fix unaligned access in mesh table hash function

The pointer to the last four bytes of the address is not guaranteed to be
aligned, so we need to use __get_unaligned_cpu32 here

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: un-schedule TXQs on powersave start

Once a station enters powersave, its queues should not be returned by
ieee80211_next_txq() anymore. They will be re-scheduled again after the
station has woken up again

Fixes: 1866760096bf4 ("mac80211: Add TXQ scheduling API")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

net: core: netif_receive_skb_list: unlist skb before passing to pt->func

__netif_receive_skb_list_ptype() leaves skb->next poisoned before passing
it to pt_prev->func handler, what may produce (in certain cases, e.g. DSA
setup) crashes like:

[ 88.606777] CPU 0 Unable to handle kernel paging request at virtual address 0000000e, epc == 80687078, ra == 8052cc7c
[ 88.618666] Oops[#1]:
[ 88.621196] CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc2-dlink-00206-g4192a172-dirty #1473
[ 88.630885] $ 0 : 00000000 10000400 00000002 864d7850
[ 88.636709] $ 4 : 87c0ddf0 864d7800 87c0ddf0 00000000
[ 88.642526] $ 8 : 00000000 49600000 00000001 00000001
[ 88.648342] $12 : 00000000 c288617b dadbee27 25d17c41
[ 88.654159] $16 : 87c0ddf0 85cff080 80790000 fffffffd
[ 88.659975] $20 : 80797b20 ffffffff 00000001 864d7800
[ 88.665793] $24 : 00000000 8011e658
[ 88.671609] $28 : 80790000 87c0dbc0 87cabf00 8052cc7c
[ 88.677427] Hi : 00000003
[ 88.680622] Lo : 7b5b4220
[ 88.683840] epc : 80687078 vlan_dev_hard_start_xmit+0x1c/0x1a0
[ 88.690532] ra : 8052cc7c dev_hard_start_xmit+0xac/0x188
[ 88.696734] Status: 10000404 IEp
[ 88.700422] Cause : 50000008 (ExcCode 02)
[ 88.704874] BadVA : 0000000e
[ 88.708069] PrId : 0001a120 (MIPS interAptiv (multi))
[ 88.713005] Modules linked in:
[ 88.716407] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000)
[ 88.725219] Stack : 85f61c28 00000000 0000000e 80780000 87c0ddf0 85cff080 80790000 8052cc7c
[ 88.734529] 87cabf00 00000000 00000001 85f5fb40 807b0000 864d7850 87cabf00 807d0000
[ 88.743839] 864d7800 8655f600 00000000 85cff080 87c1c000 0000006a 00000000 8052d96c
[ 88.753149] 807a0000 8057adb8 87c0dcc8 87c0dc50 85cfff08 00000558 87cabf00 85f58c50
[ 88.762460] 00000002 85f58c00 864d7800 80543308 fffffff4 00000001 85f58c00 864d7800
[ 88.771770] ...
[ 88.774483] Call Trace:
[ 88.777199] [<80687078>] vlan_dev_hard_start_xmit+0x1c/0x1a0
[ 88.783504] [<8052cc7c>] dev_hard_start_xmit+0xac/0x188
[ 88.789326] [<8052d96c>] __dev_queue_xmit+0x6e8/0x7d4
[ 88.794955] [<805a8640>] ip_finish_output2+0x238/0x4d0
[ 88.800677] [<805ab6a0>] ip_output+0xc8/0x140
[ 88.805526] [<805a68f4>] ip_forward+0x364/0x560
[ 88.810567] [<805a4ff8>] ip_rcv+0x48/0xe4
[ 88.815030] [<80528d44>] __netif_receive_skb_one_core+0x44/0x58
[ 88.821635] [<8067f220>] dsa_switch_rcv+0x108/0x1ac
[ 88.827067] [<80528f80>] __netif_receive_skb_list_core+0x228/0x26c
[ 88.833951] [<8052ed84>] netif_receive_skb_list+0x1d4/0x394
[ 88.840160] [<80355a88>] lunar_rx_poll+0x38c/0x828
[ 88.845496] [<8052fa78>] net_rx_action+0x14c/0x3cc
[ 88.850835] [<806ad300>] __do_softirq+0x178/0x338
[ 88.856077] [<8012a2d4>] irq_exit+0xbc/0x100
[ 88.860846] [<802f8b70>] plat_irq_dispatch+0xc0/0x144
[ 88.866477] [<80105974>] handle_int+0x14c/0x158
[ 88.871516] [<806acfb0>] r4k_wait+0x30/0x40
[ 88.876462] Code: afb10014 8c8200a0 00803025 <9443000c> 94a20468 00000000 10620042 00a08025 9605046a
[ 88.887332]
[ 88.888982] ---[ end trace eb863d007da11cf1 ]---
[ 88.894122] Kernel panic - not syncing: Fatal exception in interrupt
[ 88.901202] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fix this by pulling skb off the sublist and zeroing skb->next pointer
before calling ptype callback.

Fixes: 88eb1944e18c ("net: core: propagate SKB lists through packet_type lookup")
Reviewed-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: rds: force to destroy connection if t_sock is NULL in rds_tcp_kill_sock().

When it is to cleanup net namespace, rds_tcp_exit_net() will call
rds_tcp_kill_sock(), if t_sock is NULL, it will not call
rds_conn_destroy(), rds_conn_path_destroy() and rds_tcp_conn_free() to free
connection, and the worker cp_conn_w is not stopped, afterwards the net is freed in
net_drop_ns(); While cp_conn_w rds_connect_worker() will call rds_tcp_conn_path_connect()
and reference 'net' which has already been freed.

In rds_tcp_conn_path_connect(), rds_tcp_set_callbacks() will set t_sock = sock before
sock->ops->connect, but if connect() is failed, it will call
rds_tcp_restore_callbacks() and set t_sock = NULL, if connect is always
failed, rds_connect_worker() will try to reconnect all the time, so
rds_tcp_kill_sock() will never to cancel worker cp_conn_w and free the
connections.

Therefore, the condition !tc->t_sock is not needed if it is going to do
cleanup_net->rds_tcp_exit_net->rds_tcp_kill_sock, because tc->t_sock is always
NULL, and there is on other path to cancel cp_conn_w and free
connection. So this patch is to fix this.

rds_tcp_kill_sock():
...
if (net != c_net || !tc->t_sock)
...
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
==================================================================
BUG: KASAN: use-after-free in inet_create+0xbcc/0xd28
net/ipv4/af_inet.c:340
Read of size 4 at addr ffff8003496a4684 by task kworker/u8:4/3721

CPU: 3 PID: 3721 Comm: kworker/u8:4 Not tainted 5.1.0 #11
Hardware name: linux,dummy-virt (DT)
Workqueue: krdsd rds_connect_worker
Call trace:
dump_backtrace+0x0/0x3c0 arch/arm64/kernel/time.c:53
show_stack+0x28/0x38 arch/arm64/kernel/traps.c:152
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x120/0x188 lib/dump_stack.c:113
print_address_description+0x68/0x278 mm/kasan/report.c:253
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x21c/0x348 mm/kasan/report.c:409
__asan_report_load4_noabort+0x30/0x40 mm/kasan/report.c:429
inet_create+0xbcc/0xd28 net/ipv4/af_inet.c:340
__sock_create+0x4f8/0x770 net/socket.c:1276
sock_create_kern+0x50/0x68 net/socket.c:1322
rds_tcp_conn_path_connect+0x2b4/0x690 net/rds/tcp_connect.c:114
rds_connect_worker+0x108/0x1d0 net/rds/threads.c:175
process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153
worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296
kthread+0x2f0/0x378 kernel/kthread.c:255
ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117

Allocated by task 687:
save_stack mm/kasan/kasan.c:448 [inline]
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xd4/0x180 mm/kasan/kasan.c:553
kasan_slab_alloc+0x14/0x20 mm/kasan/kasan.c:490
slab_post_alloc_hook mm/slab.h:444 [inline]
slab_alloc_node mm/slub.c:2705 [inline]
slab_alloc mm/slub.c:2713 [inline]
kmem_cache_alloc+0x14c/0x388 mm/slub.c:2718
kmem_cache_zalloc include/linux/slab.h:697 [inline]
net_alloc net/core/net_namespace.c:384 [inline]
copy_net_ns+0xc4/0x2d0 net/core/net_namespace.c:424
create_new_namespaces+0x300/0x658 kernel/nsproxy.c:107
unshare_nsproxy_namespaces+0xa0/0x198 kernel/nsproxy.c:206
ksys_unshare+0x340/0x628 kernel/fork.c:2577
__do_sys_unshare kernel/fork.c:2645 [inline]
__se_sys_unshare kernel/fork.c:2643 [inline]
__arm64_sys_unshare+0x38/0x58 kernel/fork.c:2643
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall arch/arm64/kernel/syscall.c:47 [inline]
el0_svc_common+0x168/0x390 arch/arm64/kernel/syscall.c:83
el0_svc_handler+0x60/0xd0 arch/arm64/kernel/syscall.c:129
el0_svc+0x8/0xc arch/arm64/kernel/entry.S:960

Freed by task 264:
save_stack mm/kasan/kasan.c:448 [inline]
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x114/0x220 mm/kasan/kasan.c:521
kasan_slab_free+0x10/0x18 mm/kasan/kasan.c:528
slab_free_hook mm/slub.c:1370 [inline]
slab_free_freelist_hook mm/slub.c:1397 [inline]
slab_free mm/slub.c:2952 [inline]
kmem_cache_free+0xb8/0x3a8 mm/slub.c:2968
net_free net/core/net_namespace.c:400 [inline]
net_drop_ns.part.6+0x78/0x90 net/core/net_namespace.c:407
net_drop_ns net/core/net_namespace.c:406 [inline]
cleanup_net+0x53c/0x6d8 net/core/net_namespace.c:569
process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153
worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296
kthread+0x2f0/0x378 kernel/kthread.c:255
ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117

The buggy address belongs to the object at ffff8003496a3f80
which belongs to the cache net_namespace of size 7872
The buggy address is located 1796 bytes inside of
7872-byte region [ffff8003496a3f80, ffff8003496a5e40)
The buggy address belongs to the page:
page:ffff7e000d25a800 count:1 mapcount:0 mapping:ffff80036ce4b000
index:0x0 compound_mapcount: 0
flags: 0xffffe0000008100(slab|head)
raw: 0ffffe0000008100 dead000000000100 dead000000000200 ffff80036ce4b000
raw: 0000000000000000 0000000080040004 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff8003496a4580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8003496a4600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8003496a4680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8003496a4700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8003496a4780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Fixes: 467fa15356ac("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

openvswitch: fix flow actions reallocation

The flow action buffer can be resized if it's not big enough to contain
all the requested flow actions. However, this resize doesn't take into
account the new requested size, the buffer is only increased by a factor
of 2x. This might be not enough to contain the new data, causing a
buffer overflow, for example:

[   42.044472] =============================================================================
[   42.045608] BUG kmalloc-96 (Not tainted): Redzone overwritten
[   42.046415] -----------------------------------------------------------------------------

[   42.047715] Disabling lock debugging due to kernel taint
[   42.047716] INFO: 0x8bf2c4a5-0x720c0928. First byte 0x0 instead of 0xcc
[   42.048677] INFO: Slab 0xbc6d2040 objects=29 used=18 fp=0xdc07dec4 flags=0x2808101
[   42.049743] INFO: Object 0xd53a3464 @offset=2528 fp=0xccdcdebb

[   42.050747] Redzone 76f1b237: cc cc cc cc cc cc cc cc                          ........
[   42.051839] Object d53a3464: 6b 6b 6b 6b 6b 6b 6b 6b 0c 00 00 00 6c 00 00 00  kkkkkkkk....l...
[   42.053015] Object f49a30cc: 6c 00 0c 00 00 00 00 00 00 00 00 03 78 a3 15 f6  l...........x...
[   42.054203] Object acfe4220: 20 00 02 00 ff ff ff ff 00 00 00 00 00 00 00 00   ...............
[   42.055370] Object 21024e91: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[   42.056541] Object 070e04c3: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[   42.057797] Object 948a777a: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[   42.059061] Redzone 8bf2c4a5: 00 00 00 00                                      ....
[   42.060189] Padding a681b46e: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ

Fix by making sure the new buffer is properly resized to contain all the
requested data.

BugLink: https://bugs.launchpad.net/bugs/1813244
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'nfp-fix-retcode-and-disable-netpoll-on-representors'

Jakub Kicinski says:

====================
nfp: fix retcode and disable netpoll on representors

This series avoids a potential crash on nfp representor devices
when netpoll is in use. If transmitting the frame through underlying
vNIC fails we'd return an error code (by passing on error code from
__dev_queue_xmit()) and cause double free in netpoll code.

Fix the error code and disable netpoll on reprs altogether.
IRQ-safety of locking the queues and calling __dev_queue_xmit()
is questionable.

Big thanks to John Hurley for debugging and narrowing down
the trace log after I gave up! :)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: disable netpoll on representors

NFP reprs are software device on top of the PF's vNIC.
The comment above __dev_queue_xmit() sayeth:

When calling this method, interrupts MUST be enabled. This is because
the BH enable code must have IRQs enabled so that it will not deadlock.

For netconsole we can't guarantee IRQ state, let's just
disable netpoll on representors to be on the safe side.

When the initial implementation of NFP reprs was added by the
commit 5de73ee46704 ("nfp: general representor implementation")
.ndo_poll_controller was required for netpoll to be enabled.

Fixes: ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: validate the return code from dev_queue_xmit()

dev_queue_xmit() may return error codes as well as netdev_tx_t,
and it always consumes the skb. Make sure we always return a
correct netdev_tx_t value.

Fixes: eadfa4c3be99 ("nfp: add stats and xmit helpers for representors")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netns: provide pure entropy for net_hash_mix()

net_hash_mix() currently uses kernel address of a struct net,
and is used in many places that could be used to reveal this
address to a patient attacker, thus defeating KASLR, for
the typical case (initial net namespace, &init_net is
not dynamically allocated)

I believe the original implementation tried to avoid spending
too many cycles in this function, but security comes first.

Also provide entropy regardless of CONFIG_NET_NS.

Fixes: 0b4419162aa6 ("netns: introduce the net_hash_mix "salt" for hashes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reported-by: Benny Pinkas <benny@pinkas.net>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

qmi_wwan: add Olicard 600

This is a Qualcomm based device with a QMI function on interface 4.
It is mode switched from 2020:2030 using a standard eject message.

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2020 ProdID=2031 Rev= 2.32
S:  Manufacturer=Mobile Connect
S:  Product=Mobile Connect
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E:  Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: Implement flow_dissect callback for tag_qca

Add flow_dissect for qca tagged packet to get the right hash.

Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '40GbE' of git://git./linux/kernel/git/jkirsher/net-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Fixes 2019-03-26

This series contains updates to igb, ixgbe, i40e and fm10k.

Jake fixes an issue with PTP in i40e where a previous commit resulted
in a regression where the driver would interpret small negative
adjustments as large positive additions, resulting in incorrect
behavior.

Arvind Sankar fixes an issue in igb where a previous commit would cause
a warning in the PCI pm core and resulted in pci_pm_runtime_suspend
would not call pci_save_state or pci_finish_runtime_suspend.

Ivan Vecera fixes MDIO bus registration with ixgbe, where the driver was
ignoring errors returned when registering and would leave the pointer in
a NULL state which triggered a BUG when un-registering.

Stefan Assmann fixes the check for Wake-On-LAN for i40e, which only
supports magic packet.

Yue Haibing fixes a potential NULL pointer de-reference in fm10k by
adding a simple check if the value is NULL.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'batadv-net-for-davem-20190328' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

- Fix refcount underflows in bridge loop avoidance code,
by Sven Eckelmann (3 patches)

- Fix warning when CFG80211 isn't enabled, by Anders Roxell

- Fix genl notification for throughput override, by Sven Eckelmann

====================

Signed-off-by: David S. Miller <davem@davemloft.net>

vrf: prevent adding upper devices

VRF devices don't work with upper devices. Currently, it's possible to
add a VRF device to a bridge or team, and to create macvlan, macsec, or
ipvlan devices on top of a VRF (bond and vlan are prevented respectively
by the lack of an ndo_set_mac_address op and the NETIF_F_VLAN_CHALLENGED
feature flag).

Fix this by setting the IFF_NO_RX_HANDLER flag (introduced in commit
f5426250a6ec ("net: introduce IFF_NO_RX_HANDLER")).

Cc: David Ahern <dsahern@gmail.com>
Fixes: 193125dbd8eb ("net: Introduce VRF device driver")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'thunderx-fix-receive-buffer-page-recycling'

Dean Nelson says:

====================
thunderx: fix receive buffer page recycling

In attempting to optimize receive buffer page recycling for XDP, commit
773225388dae15e72790 ("net: thunderx: Optimize page recycling for XDP")
inadvertently introduced two problems for the non-XDP case, that will be
addressed by this patch series.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

thunderx: eliminate extra calls to put_page() for pages held for recycling

For the non-XDP case, commit 773225388dae15e72790 ("net: thunderx: Optimize
page recycling for XDP") added code to nicvf_free_rbdr() that, when releasing
the additional receive buffer page reference held for recycling, repeatedly
calls put_page() until the page's _refcount goes to zero. Which results in
the page being freed.

This is not okay if the page's _refcount was greater than 1 (in the non-XDP
case), because nicvf_free_rbdr() should not be subtracting more than what
nicvf_alloc_page() had previously added to the page's _refcount, which was
only 1 (in the non-XDP case).

This can arise if a received packet is still being processed and the receive
buffer (i.e., skb->head) has not yet been freed via skb_free_head() when
nicvf_free_rbdr() is spinning through the aforementioned put_page() loop.

If this should occur, when the received packet finishes processing and
skb_free_head() is called, various problems can ensue. Exactly what, depends on
whether the page has already been reallocated or not, anything from "BUG: Bad
page state ... ", to "Unable to handle kernel NULL pointer dereference ..." or
"Unable to handle kernel paging request...".

So this patch changes nicvf_free_rbdr() to only call put_page() once for pages
held for recycling (in the non-XDP case).

Fixes: 773225388dae ("net: thunderx: Optimize page recycling for XDP")
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

thunderx: enable page recycling for non-XDP case

Commit 773225388dae15e72790 ("net: thunderx: Optimize page recycling for XDP")
added code to nicvf_alloc_page() that inadvertently disables receive buffer
page recycling for the non-XDP case by always NULL'ng the page pointer.

This patch corrects two if-conditionals to allow for the recycling of non-XDP
mode pages by only setting the page pointer to NULL when the page is not ready
for recycling.

Fixes: 773225388dae ("net: thunderx: Optimize page recycling for XDP")
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mii: Fix PAUSE cap advertisement from linkmode_adv_to_lcl_adv_t() helper

With a recent link mode advertisement code update this helper
providing local pause capability translation used for flow
control link mode negotiation got broken.
For eth drivers using this helper, the issue is apparent only
if either PAUSE or ASYM_PAUSE is being advertised.

Fixes: 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix compile error

Currently, the rules for configuring search paths in Kbuild have
changed, this will lead some erros when compiling hns3 with the
following command:

make O=DIR M=drivers/net/ethernet/hisilicon/hns3

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c:11:10:
fatal error: hnae3.h: No such file or directory

This patch fix it by adding $(srctree)/ prefix to the serach paths.

Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ila: Fix rhashtable walker list corruption

ila_xlat_nl_cmd_flush uses rhashtable walkers allocated from the
stack but it never frees them. This corrupts the walker list of
the hash table.

This patch fixes it.

Reported-by: syzbot+dae72a112334aa65a159@syzkaller.appspotmail.com
Fixes: b6e71bdebb12 ("ila: Flush netlink command to clear xlat...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: Fix documentation file name for PHY Library

MAINTAINERS still pointed to phy.txt after moving this file into the rst
format, fix this.

Reported-by: Joe Perches <joe@perches.com>
Fixes: 25fe02d00a1e ("Documentation: net: phy: switch documentation to rst format")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: datagram: fix unbounded loop in __skb_try_recv_datagram()

Christoph reported a stall while peeking datagram with an offset when
busy polling is enabled. __skb_try_recv_datagram() uses as the loop
termination condition 'queue empty'. When peeking, the socket
queue can be not empty, even when no additional packets are received.

Address the issue explicitly checking for receive queue changes,
as currently done by __skb_wait_for_more_packets().

Fixes: 2b5cd0dfa384 ("net: Change return type of sk_busy_loop from bool to void")
Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: fix few issues in mv88e6390x_port_set_cmode

This patches fixes few issues in mv88e6390x_port_set_cmode().

1. When entering the function the old cmode may be 0, in this case
   mv88e6390x_serdes_get_lane() returns -ENODEV. As result we bail
   out and have no chance to set a new mode. Therefore deal properly
   with -ENODEV.

2. Once we have disabled power and irq, let's set the cached cmode to 0.
   This reflects the actual status and is cleaner if we bail out with an
   error in the following function calls.

3. The cached cmode is used by mv88e6390x_serdes_get_lane(),
   mv88e6390_serdes_power_lane() and mv88e6390_serdes_irq_enable().
   Currently we set the cached mode to the new one at the very end of
   the function only, means until then we use the old one what may be
   wrong.

4. When calling mv88e6390_serdes_irq_enable() we use the lane value
   belonging to the old cmode. Get the lane belonging to the new cmode
   before calling this function.

It's hard to provide a good "Fixes" tag because quite a few smaller
changes have been done to the code in question recently.

Fixes: d235c48b40d3 ("net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:
"Fixes here and there, a couple new device IDs, as usual:

   1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.

   2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.

   3) Fix documentation for some eBPF helpers, from Quentin Monnet.

   4) Some UAPI bpf header sync with tools, also from Quentin Monnet.

   5) Set descriptor ownership bit at the right time for jumbo frames in
      stmmac driver, from Aaro Koskinen.

   6) Set IFF_UP properly in tun driver, from Eric Dumazet.

   7) Fix load/store doubleword instruction generation in powerpc eBPF
      JIT, from Naveen N. Rao.

   8) nla_nest_start() return value checks all over, from Kangjie Lu.

   9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
      merge window. From Marcelo Ricardo Leitner and Xin Long.

  10) Fix memory corruption with large MTUs in stmmac, from Aaro
      Koskinen.

  11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
      Dumazet.

  12) Fix topology subscription cancellation in tipc, from Erik Hugne.

  13) Memory leak in genetlink error path, from Yue Haibing.

  14) Valid control actions properly in packet scheduler, from Davide
      Caratti.

  15) Even if we get EEXIST, we still need to rehash if a shrink was
      delayed. From Herbert Xu.

  16) Fix interrupt mask handling in interrupt handler of r8169, from
      Heiner Kallweit.

  17) Fix leak in ehea driver, from Wen Yang"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
  dpaa2-eth: fix race condition with bql frame accounting
  chelsio: use BUG() instead of BUG_ON(1)
  net: devlink: skip info_get op call if it is not defined in dumpit
  net: phy: bcm54xx: Encode link speed and activity into LEDs
  tipc: change to check tipc_own_id to return in tipc_net_stop
  net: usb: aqc111: Extend HWID table by QNAP device
  net: sched: Kconfig: update reference link for PIE
  net: dsa: qca8k: extend slave-bus implementations
  net: dsa: qca8k: remove leftover phy accessors
  dt-bindings: net: dsa: qca8k: support internal mdio-bus
  dt-bindings: net: dsa: qca8k: fix example
  net: phy: don't clear BMCR in genphy_soft_reset
  bpf, libbpf: clarify bump in libbpf version info
  bpf, libbpf: fix version info and add it to shared object
  rxrpc: avoid clang -Wuninitialized warning
  tipc: tipc clang warning
  net: sched: fix cleanup NULL pointer exception in act_mirr
  r8169: fix cable re-plugging issue
  net: ethernet: ti: fix possible object reference leak
  net: ibm: fix possible object reference leak
  ...

fm10k: Fix a potential NULL pointer dereference

Syzkaller report this:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 4378 Comm: syz-executor.0 Tainted: G         C        5.0.0+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:__lock_acquire+0x95b/0x3200 kernel/locking/lockdep.c:3573
Code: 00 0f 85 28 1e 00 00 48 81 c4 08 01 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 4c 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 24 00 00 49 81 7d 00 e0 de 03 a6 41 bc 00 00
RSP: 0018:ffff8881e3c07a40 EFLAGS: 00010002
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000010 RSI: 0000000000000000 RDI: 0000000000000080
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8881e3c07d98 R11: ffff8881c7f21f80 R12: 0000000000000001
R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000001
FS:  00007fce2252e700(0000) GS:ffff8881f2400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fffc7eb0228 CR3: 00000001e5bea002 CR4: 00000000007606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
lock_acquire+0xff/0x2c0 kernel/locking/lockdep.c:4211
__mutex_lock_common kernel/locking/mutex.c:925 [inline]
__mutex_lock+0xdf/0x1050 kernel/locking/mutex.c:1072
drain_workqueue+0x24/0x3f0 kernel/workqueue.c:2934
destroy_workqueue+0x23/0x630 kernel/workqueue.c:4319
__do_sys_delete_module kernel/module.c:1018 [inline]
__se_sys_delete_module kernel/module.c:961 [inline]
__x64_sys_delete_module+0x30c/0x480 kernel/module.c:961
do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fce2252dc58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fce2252e6bc
R13: 00000000004bcca9 R14: 00000000006f6b48 R15: 00000000ffffffff

If alloc_workqueue fails, it should return -ENOMEM, otherwise may
trigger this NULL pointer dereference while unloading drivers.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 0a38c17a21a0 ("fm10k: Remove create_workqueue")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

i40e: fix WoL support check

The current check for WoL on i40e is broken. Code comment says only
magic packet is supported, so only check for that.

Fixes: 540a152da762 (i40e/ixgbe/igb: fail on new WoL flag setting WAKE_MAGICSECURE)
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: fix mdio bus registration

The ixgbe ignores errors returned from mdiobus_register() and leaves
adapter->mii_bus non-NULL and MDIO bus state as MDIOBUS_ALLOCATED.
This triggers a BUG from mdiobus_unregister() during ixgbe_remove() call.

Fixes: 8fa10ef01260 ("ixgbe: register a mdiobus")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

igb: Fix WARN_ONCE on runtime suspend

The runtime_suspend device callbacks are not supposed to save
configuration state or change the power state. Commit fb29f76cc566
("igb: Fix an issue that PME is not enabled during runtime suspend")
changed the driver to not save configuration state during runtime
suspend, however the driver callback still put the device into a
low-power state. This causes a warning in the pci pm core and results in
pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend.

Fix this by not changing the power state either, leaving that to pci pm
core, and make the same change for suspend callback as well.

Also move a couple of defines into the appropriate header file instead
of inline in the .c file.

Fixes: fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend")
Signed-off-by: Arvind Sankar <niveditas98@gmail.com>
Reviewed-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

i40e: fix i40e_ptp_adjtime when given a negative delta

Commit 0ac30ce43323 ("i40e: fix up 32 bit timespec references",
2017-07-26) claims to be cleaning up references to 32-bit timespecs.

The actual contents of the commit make no sense, as it converts a call
to timespec64_add into timespec64_add_ns. This would seem ok, if (a) the
change was documented in the commit message, and (b) timespec64_add_ns
supported negative numbers.

timespec64_add_ns doesn't work with signed deltas, because the
implementation is based around iter_div_u64_rem. This change resulted in
a regression where i40e_ptp_adjtime would interpret small negative
adjustments as large positive additions, resulting in incorrect
behavior.

This commit doesn't appear to fix anything, is not well explained, and
introduces a bug, so lets just revert it.

Reverts: 0ac30ce43323 ("i40e: fix up 32 bit timespec references", 2017-07-26)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Merge tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:

  Stable fixes:
   - Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
   - fix mount/umount race in nlmclnt.
   - NFSv4.1 don't free interrupted slot on open

  Bugfixes:
   - Don't let RPC_SOFTCONN tasks time out if the transport is connected
   - Fix a typo in nfs_init_timeout_values()
   - Fix layoutstats handling during read failovers
   - fix uninitialized variable warning"

* tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: fix uninitialized variable warning
  pNFS/flexfiles: Fix layoutstats handling during read failovers
  NFS: Fix a typo in nfs_init_timeout_values()
  SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected
  NFSv4.1 don't free interrupted slot on open
  NFS: fix mount/umount race in nlmclnt.
  NFS: Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()

SUNRPC: fix uninitialized variable warning

Avoid following compiler warning on uninitialized variable

net/sunrpc/xprtsock.c: In function ‘xs_read_stream_request.constprop’:
net/sunrpc/xprtsock.c:525:10: warning: ‘read’ may be used uninitialized in this function [-Wmaybe-uninitialized]
   return read;
          ^~~~
net/sunrpc/xprtsock.c:529:23: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  return ret < 0 ? ret : read;
         ~~~~~~~~~~~~~~^~~~~~

Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

dpaa2-eth: fix race condition with bql frame accounting

It might happen that Tx conf acknowledges a frame before it was
subscribed in bql, as subscribing was previously done after the enqueue
operation.

This patch moves the netdev_tx_sent_queue call before the actual frame
enqueue, so that this can never happen.

Fixes: 569dac6a5a0d ("dpaa2-eth: bql support")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

chelsio: use BUG() instead of BUG_ON(1)

clang warns about possible bugs in a dead code branch after
BUG_ON(1) when CONFIG_PROFILE_ALL_BRANCHES is enabled:

drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: error: variable 'buf_size' is used uninitialized whenever 'if'
      condition is false [-Werror,-Wsometimes-uninitialized]
                BUG_ON(1);
                ^~~~~~~~~
include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON'
#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
                                   ^~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:48:23: note: expanded from macro 'unlikely'
#  define unlikely(x)   (__branch_check__(x, 0, __builtin_constant_p(x)))
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/sge.c:482:9: note: uninitialized use occurs here
        return buf_size;
               ^~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: note: remove the 'if' if its condition is always true
                BUG_ON(1);
                ^
include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON'
#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
                               ^
drivers/net/ethernet/chelsio/cxgb4/sge.c:459:14: note: initialize the variable 'buf_size' to silence this warning
        int buf_size;
                    ^
                     = 0

Use BUG() here to create simpler code that clang understands
correctly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: devlink: skip info_get op call if it is not defined in dumpit

In dumpit, unlike doit, the check for info_get op being defined
is missing. Add it and avoid null pointer dereference in case driver
does not define this op.

Fixes: f9cf22882c60 ("devlink: add device information API")
Reported-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: bcm54xx: Encode link speed and activity into LEDs

Previously the green and amber LEDs on this quad PHY were solid, to
indicate an encoding of the link speed (10/100/1000).

This keeps the LEDs always on just as before, but now they flash on
Rx/Tx activity.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: change to check tipc_own_id to return in tipc_net_stop

When running a syz script, a panic occurred:

[  156.088228] BUG: KASAN: use-after-free in tipc_disc_timeout+0x9c9/0xb20 [tipc]
[  156.094315] Call Trace:
[  156.094844]  <IRQ>
[  156.095306]  dump_stack+0x7c/0xc0
[  156.097346]  print_address_description+0x65/0x22e
[  156.100445]  kasan_report.cold.3+0x37/0x7a
[  156.102402]  tipc_disc_timeout+0x9c9/0xb20 [tipc]
[  156.106517]  call_timer_fn+0x19a/0x610
[  156.112749]  run_timer_softirq+0xb51/0x1090

It was caused by the netns freed without deleting the discoverer timer,
while later on the netns would be accessed in the timer handler.

The timer should have been deleted by tipc_net_stop() when cleaning up a
netns. However, tipc has been able to enable a bearer and start d->timer
without the local node_addr set since Commit 52dfae5c85a4 ("tipc: obtain
node identity from interface by default"), which caused the timer not to
be deleted in tipc_net_stop() then.

So fix it in tipc_net_stop() by changing to check local node_id instead
of local node_addr, as Jon suggested.

While at it, remove the calling of tipc_nametbl_withdraw() there, since
tipc_nametbl_stop() will take of the nametbl's freeing after.

Fixes: 52dfae5c85a4 ("tipc: obtain node identity from interface by default")
Reported-by: syzbot+a25307ad099309f1c2b9@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: aqc111: Extend HWID table by QNAP device

New device of QNAP based on aqc111u
Add this ID to blacklist of cdc_ether driver as well

Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: Kconfig: update reference link for PIE

RFC 8033 replaces the IETF draft for PIE

Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: qca8k: extend slave-bus implementations

This patch implements accessors for the QCA8337 MDIO access
through the MDIO_MASTER register, which makes it possible to
access the PHYs on slave-bus through the switch. In cases
where the switch ports are already mapped via external
"phy-phandles", the internal mdio-bus is disabled in order to
prevent a duplicated discovery and enumeration of the same
PHYs. Don't use mixed external and internal mdio-bus
configurations, as this is not supported by the hardware.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: qca8k: remove leftover phy accessors

This belated patch implements Andrew Lunn's request of
"remove the phy_read() and phy_write() functions."
<https://lore.kernel.org/patchwork/comment/902734/>

While seemingly harmless, this causes the switch's user
port PHYs to get registered twice. This is because the
DSA subsystem will create a slave mdio-bus not knowing
that the qca8k_phy_(read|write) accessors operate on
the external mdio-bus. So the same "bus" gets effectively
duplicated.

Cc: stable@vger.kernel.org
Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: net: dsa: qca8k: support internal mdio-bus

This patch updates the qca8k's binding to document to the
approach for using the internal mdio-bus of the supported
qca8k switches.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: net: dsa: qca8k: fix example

In the example, the phy at phy@0 is clashing with
the switch0@0 at the same address. Usually, the switches
are accessible through pseudo PHYs which in case of the
qca8k are located at 0x10 - 0x18.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-5.1-rc2-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

- fsync fixes: i_size for truncate vs fsync, dio vs buffered during
   snapshotting, remove complicated but incomplete assertion

- removed excessive warnigs, misreported device stats updates

- fix raid56 page mapping for 32bit arch

- fixes reported by static analyzer

* tag 'for-5.1-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix assertion failure on fsync with NO_HOLES enabled
  btrfs: Avoid possible qgroup_rsv_size overflow in btrfs_calculate_inode_block_rsv_size
  btrfs: Fix bound checking in qgroup_trace_new_subtree_blocks
  btrfs: raid56: properly unmap parity page in finish_parity_scrub()
  btrfs: don't report readahead errors and don't update statistics
  Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes
  btrfs: remove WARN_ON in log_dir_items
  Btrfs: fix incorrect file size after shrinking truncate and fsync

Merge tag 'trace-v5.1-rc2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
"Three small fixes:

   - A fix to a double free in the histogram code

   - Uninitialized variable fix

   - Use NULL instead of zero fix and spelling fixes"

* tag 'trace-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix warning using plain integer as NULL & spelling corrections
  tracing: initialize variable in create_dyn_event()
  tracing: Remove unnecessary var_ref destroy in track_data_destroy()

Merge tag 'locks-v5.1' of git://git./linux/kernel/git/jlayton/linux

Pull file locking bugfix from Jeff Layton:
"Just a single fix for a bug that crept into POSIX lock deadlock
detection in v5.0"

* tag 'locks-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
locks: wake any locks blocked on request before deadlock check

ftrace: Fix warning using plain integer as NULL & spelling corrections

Changed 0 --> NULL to avoid sparse warning
Corrected spelling mistakes reported by checkpatch.pl
Sparse warning below:

sudo make C=2 CF=-D__CHECK_ENDIAN__ M=kernel/trace

CHECK kernel/trace/ftrace.c
kernel/trace/ftrace.c:3007:24: warning: Using plain integer as NULL pointer
kernel/trace/ftrace.c:4758:37: warning: Using plain integer as NULL pointer

Link: http://lkml.kernel.org/r/20190323183523.GA2244@hari-Inspiron-1545
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: initialize variable in create_dyn_event()

Fix compile warning in create_dyn_event(): 'ret' may be used uninitialized
in this function [-Wuninitialized].

Link: http://lkml.kernel.org/r/1553237900-8555-1-git-send-email-frowand.list@gmail.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 5448d44c3855 ("tracing: Add unified dynamic event framework")
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Remove unnecessary var_ref destroy in track_data_destroy()

Commit 656fe2ba85e8 (tracing: Use hist trigger's var_ref array to
destroy var_refs) centralized the destruction of all the var_refs
in one place so that other code didn't have to do it.

The track_data_destroy() added later ignored that and also destroyed
the track_data var_ref, causing a double-free error flagged by KASAN.

==================================================================
BUG: KASAN: use-after-free in destroy_hist_field+0x30/0x70
Read of size 8 at addr ffff888086df2210 by task bash/1694

CPU: 6 PID: 1694 Comm: bash Not tainted 5.1.0-rc1-test+ #15
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03
07/14/2016
Call Trace:
dump_stack+0x71/0xa0
? destroy_hist_field+0x30/0x70
print_address_description.cold.3+0x9/0x1fb
? destroy_hist_field+0x30/0x70
? destroy_hist_field+0x30/0x70
kasan_report.cold.4+0x1a/0x33
? __kasan_slab_free+0x100/0x150
? destroy_hist_field+0x30/0x70
destroy_hist_field+0x30/0x70
track_data_destroy+0x55/0xe0
destroy_hist_data+0x1f0/0x350
hist_unreg_all+0x203/0x220
event_trigger_open+0xbb/0x130
do_dentry_open+0x296/0x700
? stacktrace_count_trigger+0x30/0x30
? generic_permission+0x56/0x200
? __x64_sys_fchdir+0xd0/0xd0
? inode_permission+0x55/0x200
? security_inode_permission+0x18/0x60
path_openat+0x633/0x22b0
? path_lookupat.isra.50+0x420/0x420
? __kasan_kmalloc.constprop.12+0xc1/0xd0
? kmem_cache_alloc+0xe5/0x260
? getname_flags+0x6c/0x2a0
? do_sys_open+0x149/0x2b0
? do_syscall_64+0x73/0x1b0
? entry_SYSCALL_64_after_hwframe+0x44/0xa9
? _raw_write_lock_bh+0xe0/0xe0
? __kernel_text_address+0xe/0x30
? unwind_get_return_address+0x2f/0x50
? __list_add_valid+0x2d/0x70
? deactivate_slab.isra.62+0x1f4/0x5a0
? getname_flags+0x6c/0x2a0
? set_track+0x76/0x120
do_filp_open+0x11a/0x1a0
? may_open_dev+0x50/0x50
? _raw_spin_lock+0x7a/0xd0
? _raw_write_lock_bh+0xe0/0xe0
? __alloc_fd+0x10f/0x200
do_sys_open+0x1db/0x2b0
? filp_open+0x50/0x50
do_syscall_64+0x73/0x1b0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fa7b24a4ca2
Code: 25 00 00 41 00 3d 00 00 41 00 74 4c 48 8d 05 85 7a 0d 00 8b 00 85 c0
75 6d 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff
0f 87 a2 00 00 00 48 8b 4c 24 28 64 48 33 0c 25
RSP: 002b:00007fffbafb3af0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
RAX: ffffffffffffffda RBX: 000055d3648ade30 RCX: 00007fa7b24a4ca2
RDX: 0000000000000241 RSI: 000055d364a55240 RDI: 00000000ffffff9c
RBP: 00007fffbafb3bf0 R08: 0000000000000020 R09: 0000000000000002
R10: 00000000000001b6 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000003 R14: 0000000000000001 R15: 000055d364a55240
==================================================================

So remove the track_data_destroy() destroy_hist_field() call for that
var_ref.

Link: http://lkml.kernel.org/r/1deffec420f6a16d11dd8647318d34a66d1989a9.camel@linux.intel.com
Fixes: 466f4528fbc69 ("tracing: Generalize hist trigger onmax and save action")
Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

net: phy: don't clear BMCR in genphy_soft_reset

So far we effectively clear the BMCR register. Some PHY's can deal
with this (e.g. because they reset BMCR to a default as part of a
soft-reset) whilst on others this causes issues because e.g. the
autoneg bit is cleared. Marvell is an example, see also thread [0].
So let's be a little bit more gentle and leave all bits we're not
interested in as-is. This change is needed for PHY drivers to
properly deal with the original patch.

[0] https://marc.info/?t=155264050700001&r=1&w=2

Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Tested-by: Phil Reid <preid@electromag.com.au>
Tested-by: liweihang <liweihang@hisilicon.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "parport: daisy: use new parport device model"

This reverts commit 1aec4211204d9463d1fd209eb50453de16254599.

Steven Rostedt reports that it causes a hang at bootup and bisected it
to this commit.

The troigger is apparently a module alias for "parport_lowlevel" that
points to "parport_pc", which causes a hang with

    modprobe -q -- parport_lowlevel

blocking forever with a backtrace like this:

    wait_for_completion_killable+0x1c/0x28
    call_usermodehelper_exec+0xa7/0x108
    __request_module+0x351/0x3d8
    get_lowlevel_driver+0x28/0x41 [parport]
    __parport_register_driver+0x39/0x1f4 [parport]
    daisy_drv_init+0x31/0x4f [parport]
    parport_bus_init+0x5d/0x7b [parport]
    parport_default_proc_register+0x26/0x1000 [parport]
    do_one_initcall+0xc2/0x1e0
    do_init_module+0x50/0x1d4
    load_module+0x1c2e/0x21b3
    sys_init_module+0xef/0x117

Supid says:
"Due to the new device model daisy driver will now try to find the
  parallel ports while trying to register its driver so that it can bind
  with them. Now, since daisy driver is loaded while parport bus is
  initialising the list of parport is still empty and it tries to load
  the lowlevel driver, which has an alias set to parport_pc, now causes
  a deadlock"

But I don't think the daisy driver should be loaded by the parport
initialization in the first place, so let's revert the whole change.

If the daisy driver can just initialize separately on its own (like a
driver should), instead of hooking into the parport init sequence
directly, this issue probably would go away.

Reported-and-bisected-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

locks: wake any locks blocked on request before deadlock check

Andreas reported that he was seeing the tdbtorture test fail in some
cases with -EDEADLCK when it wasn't before. Some debugging showed that
deadlock detection was sometimes discovering the caller's lock request
itself in a dependency chain.

While we remove the request from the blocked_lock_hash prior to
reattempting to acquire it, any locks that are blocked on that request
will still be present in the hash and will still have their fl_blocker
pointer set to the current request.

This causes posix_locks_deadlock to find a deadlock dependency chain
when it shouldn't, as a lock request cannot block itself.

We are going to end up waking all of those blocked locks anyway when we
go to reinsert the request back into the blocked_lock_hash, so just do
it prior to checking for deadlocks. This ensures that any lock blocked
on the current request will no longer be part of any blocked request
chain.

URL: https://bugzilla.kernel.org/show_bug.cgi?id=202975
Fixes: 5946c4319ebb ("fs/locks: allow a lock request to block other requests.")
Cc: stable@vger.kernel.org
Reported-by: Andreas Schneider <asn@redhat.com>
Signed-off-by: Neil Brown <neilb@suse.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>

batman-adv: Fix genl notification for throughput_override

The throughput_override sysfs file is not below the meshif but below a
hardif. The kobj has therefore not a pointer which can be used to find the
batadv_priv data. The pointer stored in the hardif object must be used
instead to find the correct meshif private data.

Fixes: 7e6f461efe25 ("batman-adv: Trigger genl notification on sysfs config change")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

batman-adv: fix warning in function batadv_v_elp_get_throughput

When CONFIG_CFG80211 isn't enabled the compiler correcly warns about
'sinfo.pertid' may be unused. It can also happen for other error
conditions that it not warn about.

net/batman-adv/bat_v_elp.c: In function ‘batadv_v_elp_get_throughput.isra.0’:
include/net/cfg80211.h:6370:13: warning: ‘sinfo.pertid’ may be used
uninitialized in this function [-Wmaybe-uninitialized]
kfree(sinfo->pertid);
~~~~~^~~~~~~~

Rework so that we only release '&sinfo' if cfg80211_get_station returns
zero.

Fixes: 7d652669b61d ("batman-adv: release station info tidstats")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

batman-adv: Reduce tt_global hash refcnt only for removed entry

The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.

The batadv_tt_global_free is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.

Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:

refcount_t: underflow; use-after-free.

Fixes: 7683fdc1e886 ("batman-adv: protect the local and the global trans-tables with rcu")
Reported-by: Martin Weinelt <martin@linuxlounge.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

batman-adv: Reduce tt_local hash refcnt only for removed entry

The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.

The batadv_tt_local_remove is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.

Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:

refcount_t: underflow; use-after-free.

Fixes: ef72706a0543 ("batman-adv: protect tt_local_entry from concurrent delete events")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

batman-adv: Reduce claim hash refcnt only for removed entry

The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.

The batadv_bla_del_claim is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.

Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:

refcount_t: underflow; use-after-free.

Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Alexei Starovoitov says:

====================
pull-request: bpf 2019-03-24

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) libbpf verision fix up from Daniel.

2) fix liveness propagation from Jakub.

3) fix verbose print of refcounted regs from Martin.

4) fix for large map allocations from Martynas.

5) fix use after free in sanitize_ptr_alu from Xu.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'libbpf-fixup'

Daniel Borkmann says:

====================
First one is fixing version in Makefile and shared object and
second one clarifies bump in version. Thanks!

v1 -> v2:
- Fix up soname, thanks Stanislav!
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf, libbpf: clarify bump in libbpf version info

The current documentation suggests that we would need to bump the
libbpf version on every change. Lets clarify this a bit more and
reflect what we do today in practice, that is, bumping it once per
development cycle.

Fixes: 76d1b894c515 ("libbpf: Document API and ABI conventions")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf, libbpf: fix version info and add it to shared object

Even though libbpf's versioning script for the linker (libbpf.map)
is pointing to 0.0.2, the BPF_EXTRAVERSION in the Makefile has
not been updated along with it and is therefore still on 0.0.1.

While fixing up, I also noticed that the generated shared object
versioning information is missing, typical convention is to have
a linker name (libbpf.so), soname (libbpf.so.0) and real name
(libbpf.so.0.0.2) for library management. This is based upon the
LIBBPF_VERSION as well.

The build will then produce the following bpf libraries:

  # ll libbpf*
  libbpf.a
  libbpf.so -> libbpf.so.0.0.2
  libbpf.so.0 -> libbpf.so.0.0.2
  libbpf.so.0.0.2

  # readelf -d libbpf.so.0.0.2 | grep SONAME
  0x000000000000000e (SONAME)             Library soname: [libbpf.so.0]

And install them accordingly:

  # rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld install

  Auto-detecting system features:
  ...                        libelf: [ on  ]
  ...                           bpf: [ on  ]

    CC       /tmp/bld/libbpf.o
    CC       /tmp/bld/bpf.o
    CC       /tmp/bld/nlattr.o
    CC       /tmp/bld/btf.o
    CC       /tmp/bld/libbpf_errno.o
    CC       /tmp/bld/str_error.o
    CC       /tmp/bld/netlink.o
    CC       /tmp/bld/bpf_prog_linfo.o
    CC       /tmp/bld/libbpf_probes.o
    CC       /tmp/bld/xsk.o
    LD       /tmp/bld/libbpf-in.o
    LINK     /tmp/bld/libbpf.a
    LINK     /tmp/bld/libbpf.so.0.0.2
    LINK     /tmp/bld/test_libbpf
    INSTALL  /tmp/bld/libbpf.a
    INSTALL  /tmp/bld/libbpf.so.0.0.2

  # ll /usr/local/lib64/libbpf.*
  /usr/local/lib64/libbpf.a
  /usr/local/lib64/libbpf.so -> libbpf.so.0.0.2
  /usr/local/lib64/libbpf.so.0 -> libbpf.so.0.0.2
  /usr/local/lib64/libbpf.so.0.0.2

Fixes: 1bf4b05810fe ("tools: bpftool: add probes for eBPF program types")
Fixes: 1b76c13e4b36 ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Linux 5.1-rc2

Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes for 5.1"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: prohibit fstrim in norecovery mode
  ext4: cleanup bh release code in ext4_ind_remove_space()
  ext4: brelse all indirect buffer in ext4_ind_remove_space()
  ext4: report real fs size after failed resize
  ext4: add missing brelse() in add_new_gdb_meta_bg()
  ext4: remove useless ext4_pin_inode()
  ext4: avoid panic during forced reboot
  ext4: fix data corruption caused by unaligned direct AIO
  ext4: fix NULL pointer dereference while journal is aborted

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler updates from Thomas Gleixner:
"Third more careful attempt for this set of fixes:

   - Prevent a 32bit math overflow in the cpufreq code

   - Fix a buffer overflow when scanning the cgroup2 cpu.max property

   - A set of fixes for the NOHZ scheduler logic to prevent waking up
     CPUs even if the capacity of the busy CPUs is sufficient along with
     other tweaks optimizing the behaviour for asymmetric systems
     (big/little)"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Skip LLC NOHZ logic for asymmetric systems
  sched/fair: Tune down misfit NOHZ kicks
  sched/fair: Comment some nohz_balancer_kick() kick conditions
  sched/core: Fix buffer overflow in cgroup2 property cpu.max
  sched/cpufreq: Fix 32-bit math overflow

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf updates from Thomas Gleixner:
"A larger set of perf updates.

  Not all of them are strictly fixes, but that's solely the tip
  maintainers fault as they let the timely -rc1 pull request fall
  through the cracks for various reasons including travel. So I'm
  sending this nevertheless because rebasing and distangling fixes and
  updates would be a mess and risky as well. As of tomorrow, a strict
  fixes separation is happening again. Sorry for the slip-up.

  Kernel:

   - Handle RECORD_MMAP vs. RECORD_MMAP2 correctly so different
     consumers of the mmap event get what they requested.

  Tools:

   - A larger set of updates to perf record/report/scripts vs. time
     stamp handling

   - More Python3 fixups

   - A pile of memory leak plumbing

   - perf BPF improvements and fixes

   - Finalize the perf.data directory storage"

[ Note: the kernel part is strictly a fix, the updates are purely to
  tooling       - Linus ]

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
  perf bpf: Show more BPF program info in print_bpf_prog_info()
  perf bpf: Extract logic to create program names from perf_event__synthesize_one_bpf_prog()
  perf tools: Save bpf_prog_info and BTF of new BPF programs
  perf evlist: Introduce side band thread
  perf annotate: Enable annotation of BPF programs
  perf build: Check what binutils's 'disassembler()' signature to use
  perf bpf: Process PERF_BPF_EVENT_PROG_LOAD for annotation
  perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFO
  perf feature detection: Add -lopcodes to feature-libbfd
  perf top: Add option --no-bpf-event
  perf bpf: Save BTF information as headers to perf.data
  perf bpf: Save BTF in a rbtree in perf_env
  perf bpf: Save bpf_prog_info information as headers to perf.data
  perf bpf: Save bpf_prog_info in a rbtree in perf_env
  perf bpf: Make synthesize_bpf_events() receive perf_session pointer instead of perf_tool
  perf bpf: Synthesize bpf events with bpf_program__get_prog_info_linear()
  bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()
  tools lib bpf: Introduce bpf_program__get_prog_info_linear()
  perf record: Replace option --bpf-event with --no-bpf-event
  perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()
  ...

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes:

   - Prevent potential NULL pointer dereferences in the HPET and HyperV
     code

   - Exclude the GART aperture from /proc/kcore to prevent kernel
     crashes on access

   - Use the correct macros for Cyrix I/O on Geode processors

   - Remove yet another kernel address printk leak

   - Announce microcode reload completion as requested by quite some
     people. Microcode loading has become popular recently.

   - Some 'Make Clang' happy fixlets

   - A few cleanups for recently added code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/gart: Exclude GART aperture from kcore
  x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
  x86/mm/pti: Make local symbols static
  x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors
  x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
  x86/microcode: Announce reload operation's completion
  x86/hyperv: Prevent potential NULL pointer dereference
  x86/hpet: Prevent potential NULL pointer dereference
  x86/lib: Fix indentation issue, remove extra tab
  x86/boot: Restrict header scope to make Clang happy
  x86/mm: Don't leak kernel addresses
  x86/cpufeature: Fix various quality problems in the <asm/cpu_device_hd.h> header

Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
"A set of small fixes plus the removal of stale board support code:

   - Remove the board support code from the clpx711x clocksource driver.
     This change had fallen through the cracks and I'm sending it now
     rather than dealing with people who want to improve that stale code
     for 3 month.

   - Use the proper clocksource mask on RICSV

   - Make local scope functions and variables static"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/clps711x: Remove board support
  clocksource/drivers/riscv: Fix clocksource mask
  clocksource/drivers/mips-gic-timer: Make gic_compare_irqaction static
  clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() static
  clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() static
  clocksource/drivers/clps711x: Make clps711x_clksrc_init() static
  time/jiffies: Make refined_jiffies static

Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Thomas Gleixner:
"Two small fixes:

   - Cure a recently introduces error path hickup which tries to
     unregister a not registered lockdep key in te workqueue code

   - Prevent unaligned cmpxchg() crashes in the robust list handling
     code by sanity checking the user space supplied futex pointer"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Ensure that futex address is aligned in handle_futex_death()
  workqueue: Only unregister a registered lockdep key

Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
"A set of fixes for the interrupt subsystem:

   - Remove secondary GIC support on systems w/o device-tree support

   - A set of small fixlets in various irqchip drivers

   - static and fall-through annotations

   - Kernel doc and typo fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Mark expected switch case fall-through
  genirq/devres: Remove excess parameter from kernel doc
  irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps static
  irqchip/mbigen: Don't clear eventid when freeing an MSI
  irqchip/stm32: Don't set rising configuration registers at init
  irqchip/stm32: Don't clear rising/falling config registers at init
  dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support
  irqchip/mmp: Make mmp_irq_domain_ops static
  irqchip/brcmstb-l2: Make two init functions static
  genirq: Fix typo in comment of IRQD_MOVE_PCNTXT
  irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp
  irqchip/gic: Drop support for secondary GIC in non-DT systems
  irqchip/imx-irqsteer: Fix of_property_read_u32() error handling

Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull core fixes from Thomas Gleixner:
"Two small fixes:

   - Move the large objtool_file struct off the stack so objtool works
     in setups with a tight stack limit.

   - Make a few variables static in the watchdog core code"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  watchdog/core: Make variables static
  objtool: Move objtool_file struct off the stack

Merge branch 'next' of git://git./linux/kernel/git/rzhang/linux

Pull thermal management fixes from Zhang Rui:

- Fix a wrong __percpu structure declaration in intel_powerclamp driver
   (Luc Van Oostenryck)

- Fix truncated name of the idle injection kthreads created by
   intel_powerclamp driver (Zhang Rui)

- Fix the missing UUID supports in int3400 thermal driver (Matthew
   Garrett)

- Fix a crash when accessing the debugfs of bcm2835 SoC thermal driver
   (Phil Elwell)

- A couple of trivial fixes/cleanups in some SoC thermal drivers

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal/intel_powerclamp: fix truncated kthread name
  thermal: mtk: Allocate enough space for mtk_thermal.
  thermal/int340x_thermal: fix mode setting
  thermal/int340x_thermal: Add additional UUIDs
  thermal: cpu_cooling: Remove unused cur_freq variable
  thermal: bcm2835: Fix crash in bcm2835_thermal_debugfs
  thermal: samsung: Fix incorrect check after code merge
  thermal/intel_powerclamp: fix __percpu declaration of worker_data

Merge tag '5.1-rc1-cifs-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb3 fixes from Steve French:

- two fixes for stable for guest mount problems with smb3.1.1

- two fixes for crediting (SMB3 flow control) on resent requests

- a byte range lock leak fix

- two fixes for incorrect rc mappings

* tag '5.1-rc1-cifs-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number
  SMB3: Fix SMB3.1.1 guest mounts to Samba
  cifs: Fix slab-out-of-bounds when tracing SMB tcon
  cifs: allow guest mounts to work for smb3.11
  fix incorrect error code mapping for OBJECTID_NOT_FOUND
  cifs: fix that return -EINVAL when do dedupe operation
  CIFS: Fix an issue with re-sending rdata when transport returning -EAGAIN
  CIFS: Fix an issue with re-sending wdata when transport returning -EAGAIN

Merge tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linux

Pull auxdisplay updates from Miguel Ojeda:
"A few fixes and improvements for auxdisplay:

   - Series to fix a memory leak in hd44780 while introducing
     charlcd_free(). From Andy Shevchenko

   - Series to clean up the Kconfig menus and a couple of improvements
     for charlcd. From Mans Rullgard"

* tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linux:
  auxdisplay: charlcd: make backlight initial state configurable
  auxdisplay: charlcd: simplify init message display
  auxdisplay: deconfuse configuration
  auxdisplay: hd44780: Convert to use charlcd_free()
  auxdisplay: panel: Convert to use charlcd_free()
  auxdisplay: charlcd: Introduce charlcd_free() helper
  auxdisplay: charlcd: Move to_priv() to charlcd namespace
  auxdisplay: hd44780: Fix memory leak on ->remove()

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Six fixes to four drivers and two core fixes.

  One core fix simply corrects a missed destroy_rcu_head() but the other
  is hopefully the end of an ongoing effort to make suspend/resume play
  nicely with scsi quiesce"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ibmvscsi: Fix empty event pool access during host removal
  scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaiton
  scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()
  scsi: qla2xxx: Fix NULL pointer crash due to stale CPUID
  scsi: qla2xxx: Fix FC-AL connection target discovery
  scsi: core: Avoid that a kernel warning appears during system resume
  scsi: core: Also call destroy_rcu_head() for passthrough requests
  scsi: iscsi: flush running unbind operations when removing a session

clocksource/drivers/clps711x: Remove board support

Since board support for the CLPS711X platform was removed,
remove the board support from the clps711x-timer driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20181220111626.17140-1-shc_work@mail.ru

rxrpc: avoid clang -Wuninitialized warning

clang produces a false-positive warning as it fails to notice
that "lost = true" implies that "ret" is initialized:

net/rxrpc/output.c:402:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
        if (lost)
            ^~~~
net/rxrpc/output.c:437:6: note: uninitialized use occurs here
        if (ret >= 0) {
            ^~~
net/rxrpc/output.c:402:2: note: remove the 'if' if its condition is always false
        if (lost)
        ^~~~~~~~~
net/rxrpc/output.c:339:9: note: initialize the variable 'ret' to silence this warning
        int ret, opt;
               ^
                = 0

Rearrange the code to make that more obvious and avoid the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: tipc clang warning

When checking the code with clang -Wsometimes-uninitialized we get the
following warning:

if (!tipc_link_is_establishing(l)) {
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/node.c:847:46: note: uninitialized use occurs here
      tipc_bearer_xmit(n->net, bearer_id, &xmitq, maddr);

net/tipc/node.c:831:2: note: remove the 'if' if its condition is always
true
if (!tipc_link_is_establishing(l)) {
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/node.c:821:31: note: initialize the variable 'maddr' to silence
this warning
struct tipc_media_addr *maddr;

We fix this by initializing 'maddr' to NULL. For the matter of clarity,
we also test if 'xmitq' is non-empty before we use it and 'maddr'
further down in the  function. It will never happen that 'xmitq' is non-
empty at the same time as 'maddr' is NULL, so this is a sufficient test.

Fixes: 598411d70f85 ("tipc: make resetting of links non-atomic")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: fix cleanup NULL pointer exception in act_mirr

A new mirred action is created by the tcf_mirred_init function. This
contains a list head struct which is inserted into a global list on
successful creation of a new action. However, after a creation, it is
still possible to error out and call the tcf_idr_release function. This,
in turn, calls the act_mirr cleanup function via __tcf_idr_release and
__tcf_action_put. This cleanup function tries to delete the list entry
which is as yet uninitialised, leading to a NULL pointer exception.

Fix this by initialising the list entry on creation of a new action.

Bug report:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
PGD 8000000840c73067 P4D 8000000840c73067 PUD 858dcc067 PMD 0
Oops: 0002 [#1] SMP PTI
CPU: 32 PID: 5636 Comm: handler194 Tainted: G           OE     5.0.0+ #186
Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.3.6 06/03/2015
RIP: 0010:tcf_mirred_release+0x42/0xa7 [act_mirred]
Code: f0 90 39 c0 e8 52 04 57 c8 48 c7 c7 b8 80 39 c0 e8 94 fa d4 c7 48 8b 93 d0 00 00 00 48 8b 83 d8 00 00 00 48 c7 c7 f0 90 39 c0 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 d0 00
RSP: 0018:ffffac4aa059f688 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff9dcd1b214d00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9dcd1fa165f8 RDI: ffffffffc03990f0
RBP: ffff9dccf9c7af80 R08: 0000000000000a3b R09: 0000000000000000
R10: ffff9dccfa11f420 R11: 0000000000000000 R12: 0000000000000001
R13: ffff9dcd16b433c0 R14: ffff9dcd1b214d80 R15: 0000000000000000
FS:  00007f441bfff700(0000) GS:ffff9dcd1fa00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 0000000839e64004 CR4: 00000000001606e0
Call Trace:
tcf_action_cleanup+0x59/0xca
__tcf_action_put+0x54/0x6b
__tcf_idr_release.cold.33+0x9/0x12
tcf_mirred_init.cold.20+0x22e/0x3b0 [act_mirred]
tcf_action_init_1+0x3d0/0x4c0
tcf_action_init+0x9c/0x130
tcf_exts_validate+0xab/0xc0
fl_change+0x1ca/0x982 [cls_flower]
tc_new_tfilter+0x647/0x8d0
? load_balance+0x14b/0x9e0
rtnetlink_rcv_msg+0xe3/0x370
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
? _cond_resched+0x15/0x30
? __kmalloc_node_track_caller+0x1d4/0x2b0
? rtnl_calcit.isra.31+0xf0/0xf0
netlink_rcv_skb+0x49/0x110
netlink_unicast+0x16f/0x210
netlink_sendmsg+0x1df/0x390
sock_sendmsg+0x36/0x40
___sys_sendmsg+0x27b/0x2c0
? futex_wake+0x80/0x140
? do_futex+0x2b9/0xac0
? ep_scan_ready_list.constprop.22+0x1f2/0x210
? ep_poll+0x7a/0x430
__sys_sendmsg+0x47/0x80
do_syscall_64+0x55/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 4e232818bd32 ("net: sched: act_mirred: remove dependency on rtnl lock")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: fix cable re-plugging issue

Bartek reported that after few cable unplug/replug cycles suddenly
replug isn't detected any longer. His system uses a RTL8106, I wasn't
able to reproduce the issue with RTL8168g. According to his bisect
the referenced commit caused the regression. As Realtek doesn't
release datasheets or errata it's hard to say what's the actual root
cause, but this change was reported to fix the issue.

Fixes: 38caff5a445b ("r8169: handle all interrupt events in the hard irq handler")
Reported-by: Bartosz Skrzypczak <barteks2x@gmail.com>
Suggested-by: Bartosz Skrzypczak <barteks2x@gmail.com>
Tested-by: Bartosz Skrzypczak <barteks2x@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: fix possible object reference leak

The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/net/ethernet/ti/netcp_ethss.c:3661:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function.
./drivers/net/ethernet/ti/netcp_ethss.c:3665:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Wingman Kwok <w-kwok2@ti.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ibm: fix possible object reference leak

The call to ehea_get_eth_dn returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/net/ethernet/ibm/ehea/ehea_main.c:3163:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3154, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Douglas Miller <dougmill@linux.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

net: xilinx: fix possible object reference leak

The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/net/ethernet/xilinx/xilinx_axienet_main.c:1624:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1569, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Anirudha Sarangi <anirudh@xilinx.com>
Cc: John Linn <John.Linn@xilinx.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: Re-parent menus for MDIO bus drivers correctly

After 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support
from PHYs") the various MDIO bus drivers were no longer parented with
config PHYLIB but with config MDIO_BUS which is not a menuconfig, fix
this by depending on MDIO_DEVICE which is a menuconfig.

This is visually nicer and less confusing for users.

Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'io_uring-20190323' of git://git.kernel.dk/linux-block

Pull io_uring fixes and improvements from Jens Axboe:
"The first five in this series are heavily inspired by the work Al did
  on the aio side to fix the races there.

  The last two re-introduce a feature that was in io_uring before it got
  merged, but which I pulled since we didn't have a good way to have
  BVEC iters that already have a stable reference. These aren't
  necessarily related to block, it's just how io_uring pins fixed
  buffers"

* tag 'io_uring-20190323' of git://git.kernel.dk/linux-block:
  block: add BIO_NO_PAGE_REF flag
  iov_iter: add ITER_BVEC_FLAG_NO_REF flag
  io_uring: mark me as the maintainer
  io_uring: retry bulk slab allocs as single allocs
  io_uring: fix poll races
  io_uring: fix fget/fput handling
  io_uring: add prepped flag
  io_uring: make io_read/write return an integer
  io_uring: use regular request ref counts

Merge tag 'for-linus-20190323' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"A set of fixes/changes that should go into this series. This contains:

   - Kernel doc / comment updates (Bart, Shenghui)

   - Un-export of core-only used function (Bart)

   - Fix race on loop file access (Dongli)

   - pf/pcd queue cleanup fixes (me)

   - Use appropriate helper for RESTART bit set (Yufen)

   - Use named identifier for classic poll (Yufen)"

* tag 'for-linus-20190323' of git://git.kernel.dk/linux-block:
  sbitmap: trivial - update comment for sbitmap_deferred_clear_bit
  blkcg: Fix kernel-doc warnings
  blk-iolatency: #include "blk.h"
  block: Unexport blk_mq_add_to_requeue_list()
  block: add BLK_MQ_POLL_CLASSIC for hybrid poll and return EINVAL for unexpected value
  blk-mq: remove unused 'nr_expired' from blk_mq_hw_ctx
  loop: access lo_backing_file only when the loop device is Lo_bound
  blk-mq: use blk_mq_sched_mark_restart_hctx to set RESTART
  paride/pcd: cleanup queues when detection fails
  paride/pf: cleanup queues when detection fails

Merge tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
"A follow up for the new alloc_size logic and a blacklisting fix,
  marked for stable"

* tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client:
  rbd: drop wait_for_latest_osdmap()
  libceph: wait for latest osdmap in ceph_monc_blacklist_add()
  rbd: set io_min, io_opt and discard_granularity to alloc_size

ext4: prohibit fstrim in norecovery mode

The ext4 fstrim implementation uses the block bitmaps to find free space
that can be discarded. If we haven't replayed the journal, the bitmaps
will be stale and we absolutely *cannot* use stale metadata to zap the
underlying storage.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

pNFS/flexfiles: Fix layoutstats handling during read failovers

During a read failover, we may end up changing the value of
the pgio_mirror_idx, so make sure that we record the layout
stats before that update.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFS: Fix a typo in nfs_init_timeout_values()

Specifying a retrans=0 mount parameter to a NFS/TCP mount, is
inadvertently causing the NFS client to rewrite any specified
timeout parameter to the default of 60 seconds.

Fixes: a956beda19a6 ("NFS: Allow the mount option retrans=0")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

ext4: cleanup bh release code in ext4_ind_remove_space()

Currently, we are releasing the indirect buffer where we are done with
it in ext4_ind_remove_space(), so we can see the brelse() and
BUFFER_TRACE() everywhere. It seems fragile and hard to read, and we
may probably forget to release the buffer some day. This patch cleans
up the code by putting of the code which releases the buffers to the
end of the function.

Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>