Florian Fainelli [Thu, 6 Dec 2012 22:39:33 +0000 (22:39 +0000)]
implement early_printk without an early_console
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34547
Florian Fainelli [Thu, 6 Dec 2012 22:39:27 +0000 (22:39 +0000)]
simplify IRQ controller code
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34546
Florian Fainelli [Thu, 6 Dec 2012 22:39:22 +0000 (22:39 +0000)]
use platform_add_devices
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34545
Florian Fainelli [Thu, 6 Dec 2012 22:39:18 +0000 (22:39 +0000)]
move time related functions to their own file
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34544
Florian Fainelli [Thu, 6 Dec 2012 22:39:08 +0000 (22:39 +0000)]
move setup-related functions to their own file
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34543
Steven Barth [Thu, 6 Dec 2012 20:52:40 +0000 (20:52 +0000)]
ipv6-support: next iteration * Introduce mode 6rd * Introduce mode 6to4 * Fix announcement of DNS-Servers received from DHCPv6 * Fix some corner-cases in relaying behaviour
SVN-Revision: 34542
Steven Barth [Thu, 6 Dec 2012 20:52:35 +0000 (20:52 +0000)]
6relayd: More RFC-compatibility and size reduction
SVN-Revision: 34541
Steven Barth [Thu, 6 Dec 2012 20:52:30 +0000 (20:52 +0000)]
6distributed: Add compatibility with 6rd and 6to4
SVN-Revision: 34540
Jo-Philipp Wich [Thu, 6 Dec 2012 18:17:21 +0000 (18:17 +0000)]
ppp: unconditionally start pppd with nodefaultroute and usepeerdns (#12580)
Since the switch to netifd, proto handlers may always set the defaultroute
and provide dns server addresses, netifd will decide in the generic code
path whether the announced values are masked or not.
Additionally protocol handlers should not modify the routing tables themselves
and prevent any launched services from doing so.
Remove the additional defaultroute and peerdns option handling from the ppp.sh
protocol handler and rely on netifd to mask or not mask the values.
SVN-Revision: 34536
Felix Fietkau [Thu, 6 Dec 2012 14:11:19 +0000 (14:11 +0000)]
kernel: fix video-core build on 3.6+
SVN-Revision: 34533
Felix Fietkau [Thu, 6 Dec 2012 14:11:16 +0000 (14:11 +0000)]
kernel: add missing config symbols
SVN-Revision: 34532
Felix Fietkau [Thu, 6 Dec 2012 14:11:09 +0000 (14:11 +0000)]
mac80211: clean up patches, replace patching config.mk with a generated sed expression
SVN-Revision: 34531
Florian Fainelli [Wed, 5 Dec 2012 18:05:04 +0000 (18:05 +0000)]
libiconv-full: add clause to Makefile to actually install iconv
At present, if you select the iconv utility it will be built but not
installed. This patch adds the clauses necessary to the Makefile to
actually install iconv.
Signed-off-by: Mike Brady <mikebrady@eircom.net>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34530
Felix Fietkau [Wed, 5 Dec 2012 16:49:48 +0000 (16:49 +0000)]
kernel 3.6+: nuke obsolete patches that are messing up oprofile builds
SVN-Revision: 34506
Florian Fainelli [Wed, 5 Dec 2012 14:58:54 +0000 (14:58 +0000)]
linux-atm: put all packages into their own submenus
Now that we package individual tools as well, the list of ATM tools is
pretty big to deserve its own submenu.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34504
Florian Fainelli [Wed, 5 Dec 2012 14:37:03 +0000 (14:37 +0000)]
linux-atm: fix typo introduced in r34502
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34503
Florian Fainelli [Wed, 5 Dec 2012 14:18:08 +0000 (14:18 +0000)]
linux-atm: package each available atm debug tool individually
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34502
Florian Fainelli [Wed, 5 Dec 2012 14:18:05 +0000 (14:18 +0000)]
kernel/3.3: move OHCI and EHCI platform drivers to generic
These patches are not specific to bcm47xx and will be used on other
platforms as well.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34501
Felix Fietkau [Wed, 5 Dec 2012 13:28:56 +0000 (13:28 +0000)]
netifd: update to latest version, fixes resolv.conf writes on interface setting changes
SVN-Revision: 34500
Florian Fainelli [Tue, 4 Dec 2012 22:59:05 +0000 (22:59 +0000)]
Revert "include/image.mk: call Image/Build/{cpiogz,targz}"
This breaks on platforms building their own targz/cpioz images.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34498
Florian Fainelli [Tue, 4 Dec 2012 16:40:17 +0000 (16:40 +0000)]
dropbear: update to 2012.55 and refresh patches
Upstream has a few code cleanups, more eagerly burns sensitive memory and
includes the fix for CVE-2012-0920. Full changelog:
https://matt.ucc.asn.au/dropbear/CHANGES
Local changes:
- Removed PKG_MULTI which is no longer in options.h (even before 2011.54)
- Merged DO_HOST_LOOKUP into 120-openwrt_options.patch
- Removed LD from make opts (now included in TARGET_CONFIGURE_OPTS)
- Removed 400-CVE-2012-0920.patch which is included in 2012.55
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34496
Florian Fainelli [Tue, 4 Dec 2012 16:19:24 +0000 (16:19 +0000)]
linux-atm: create atm-debug-tools package
Instead of commenting the inclusion of some binaries, just make them
available using a new package "atm-debug-tools."
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34477
Florian Fainelli [Tue, 4 Dec 2012 16:19:21 +0000 (16:19 +0000)]
linux-atm: factor common descriptions
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34476
Florian Fainelli [Tue, 4 Dec 2012 16:19:18 +0000 (16:19 +0000)]
cns3xxx: fix dwc_otg driver compat with udc-core
function. This removes those from the dwc_otg driver and removes the patch
that comments out the linkage of udc-core so that the dwc_otg driver can
co-exist happily with other USB Device Controllers.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34475
Florian Fainelli [Tue, 4 Dec 2012 16:19:12 +0000 (16:19 +0000)]
cns3xxx: advertise pcie usb usbgadget features
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34474
Florian Fainelli [Tue, 4 Dec 2012 16:19:09 +0000 (16:19 +0000)]
include/image.mk: call Image/Build/{cpiogz,targz}
All Image/mkfs/... macros call the Image/Build except for
Image/mkfs/targz and Image/mkfs/cpiogz
This patch adds the Image/Build call for Image/mkfs/targz and
Image/mkfs/cpiogz.
Signed-off-by: Maarten Bezemer <m.m.bezemer@utwente.nl>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34473
Jo-Philipp Wich [Tue, 4 Dec 2012 15:24:21 +0000 (15:24 +0000)]
firewall: extend nat reflection support
- use comment match to keep track of per-network rules
- setup reflection for any interface which is part of a masqueraded zone, not just "wan"
- delete per-network reflection rules if network is brought down
SVN-Revision: 34472
Florian Fainelli [Tue, 4 Dec 2012 15:19:50 +0000 (15:19 +0000)]
Fix Comtrend AR-5381u Power LED
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34471
Felix Fietkau [Tue, 4 Dec 2012 12:06:40 +0000 (12:06 +0000)]
mac80211, hostapd: Fix macfilter for multi bssid setups
Previously only the first macfilter configuration would have been used
on all interfaces. However, the configuration was always done per vif
already. Hence, move the macfilter setup into hostapd.sh where and
create one mac list file per vif.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 34470
Florian Fainelli [Mon, 3 Dec 2012 16:18:40 +0000 (16:18 +0000)]
do no longer rename amba-pl010 serial devices names
Back in the days when we could not override /etc/inittab, it made a lot
of sense to rename ttyAM to ttyS since this was the only supported
serial device(s), we can now just put in an appropriate /etc/inittab file
now.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34469
Mirko Vogt [Mon, 3 Dec 2012 12:46:57 +0000 (12:46 +0000)]
Make ltq-dsl-app compile with an eglibc-based toolchain
Signed-Off-By: Frank Meerkötter <frank@meerkoetter.org>
SVN-Revision: 34468
Felix Fietkau [Mon, 3 Dec 2012 10:33:47 +0000 (10:33 +0000)]
kernel: disable more pci quirks to save space on platforms that don't need them
SVN-Revision: 34467
Steven Barth [Mon, 3 Dec 2012 09:18:53 +0000 (09:18 +0000)]
ipv6-support: Second Iteration * mode 'downstream' renamed to 'router' * mode 'upstream' renamed to 'dhcpv6' * mode 'relay' added * cleanups and minor bugfixes in state handling
SVN-Revision: 34466
Steven Barth [Mon, 3 Dec 2012 07:20:44 +0000 (07:20 +0000)]
netifd: empty hotplug handler removed
SVN-Revision: 34465
Gabor Juhos [Sun, 2 Dec 2012 20:41:39 +0000 (20:41 +0000)]
mac80211: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34464
Gabor Juhos [Sun, 2 Dec 2012 20:41:37 +0000 (20:41 +0000)]
mac80211: rename a misnamed ath9k patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34463
Steven Barth [Sun, 2 Dec 2012 19:06:48 +0000 (19:06 +0000)]
6distributed: Poll for ubus to come up (fix race)
SVN-Revision: 34462
Felix Fietkau [Sun, 2 Dec 2012 18:37:41 +0000 (18:37 +0000)]
kernel 3.6+: switch to a crc32 implementation that is more suitable for small caches. reduces kernel image size by ~22 KiB on mips
SVN-Revision: 34461
Jo-Philipp Wich [Sun, 2 Dec 2012 18:35:47 +0000 (18:35 +0000)]
include: download.mk: correct tar argument order when packing checkouts
GNU TAR v1.26 will fail with "no such file or directory" errors when the
output file does not immediately follow the -f switch.
SVN-Revision: 34460
Jo-Philipp Wich [Sun, 2 Dec 2012 18:35:39 +0000 (18:35 +0000)]
tools: e2fsprogs: delete doc/ directory after unpacking to ensure that makeinfo is not invoked
SVN-Revision: 34459
Felix Fietkau [Sun, 2 Dec 2012 17:42:17 +0000 (17:42 +0000)]
kernel: fix stripping symbol exports
SVN-Revision: 34458
Felix Fietkau [Sun, 2 Dec 2012 16:50:39 +0000 (16:50 +0000)]
libubox: update to latest version, fixes blob/blobmsg endian issues
SVN-Revision: 34456
Felix Fietkau [Sun, 2 Dec 2012 16:17:33 +0000 (16:17 +0000)]
tools/sstrip: remove redundant -I flag that breaks build on some x86_64 linux hosts
SVN-Revision: 34455
Hauke Mehrtens [Sun, 2 Dec 2012 16:11:39 +0000 (16:11 +0000)]
brcm47xx: read sprom vars without prefix for boardrev and boardtype if the prefixed one is not available.
SVN-Revision: 34454
Hauke Mehrtens [Sun, 2 Dec 2012 16:09:23 +0000 (16:09 +0000)]
b43-tools: pack the lcn firmware into the brcmsmac firmware package.
SVN-Revision: 34453
Hauke Mehrtens [Sun, 2 Dec 2012 16:07:43 +0000 (16:07 +0000)]
broadcom-wl: get the mmio address directly from the struct if bcma is used.
SVN-Revision: 34452
Felix Fietkau [Sun, 2 Dec 2012 15:26:28 +0000 (15:26 +0000)]
build: it is no longer necessary to call make target/linux/clean as part of make clean
SVN-Revision: 34451
Felix Fietkau [Sun, 2 Dec 2012 15:26:24 +0000 (15:26 +0000)]
kernel: move KERNEL_BUILD_DIR under BUILD_DIR to properly fix gcc/libc based dependencies
SVN-Revision: 34450
Felix Fietkau [Sun, 2 Dec 2012 15:26:19 +0000 (15:26 +0000)]
kernel: patch in a working copy of elf.h instead of using relative path based hackery in #include statements
SVN-Revision: 34449
Felix Fietkau [Sun, 2 Dec 2012 15:26:15 +0000 (15:26 +0000)]
sstrip: remove a redundant copy of elf.h
SVN-Revision: 34448
Jo-Philipp Wich [Sun, 2 Dec 2012 15:15:07 +0000 (15:15 +0000)]
rules.mk: don't use $(realpath) in file_copy, the destination directory might not exist yet - spotted while doing a fresh build
SVN-Revision: 34447
Gabor Juhos [Sun, 2 Dec 2012 14:16:12 +0000 (14:16 +0000)]
ramips: fix serial console for Belkin
F5D8235 v1/v2
Based on a patch from #12533.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34445
Gabor Juhos [Sun, 2 Dec 2012 13:04:04 +0000 (13:04 +0000)]
Update linux-atm fixes to reflect the final upstream pull request
[juhosg: refresh the patches with quilt]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34443
Gabor Juhos [Sun, 2 Dec 2012 13:04:03 +0000 (13:04 +0000)]
Make teql hotplug script run sooner
In particular, it wants to run before the ntpclient script. Which may
block for a long time attempting to do DNS lookups for NTP servers. In
my case, that would have *worked* if the new device had been added to
teql first, rather than timing out.
This was effectively causing a huge delay between an interface coming
up, and routing actually starting to work.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34442
Gabor Juhos [Sun, 2 Dec 2012 13:04:01 +0000 (13:04 +0000)]
Change default TARGET_ROOTFS_RESERVED_PCT to zero to avoid wasted space
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34441
Jo-Philipp Wich [Sun, 2 Dec 2012 12:20:47 +0000 (12:20 +0000)]
toolchain: use file_copy to install the initial gcc files
SVN-Revision: 34440
Jo-Philipp Wich [Sun, 2 Dec 2012 12:20:43 +0000 (12:20 +0000)]
imagebuilder: use file_copy to deploy files/ in the image generation phase
SVN-Revision: 34439
Jo-Philipp Wich [Sun, 2 Dec 2012 12:20:38 +0000 (12:20 +0000)]
package: use file_copy to deploy files/ in the package/install phase
SVN-Revision: 34438
Jo-Philipp Wich [Sun, 2 Dec 2012 12:20:34 +0000 (12:20 +0000)]
rules.mk: provide a macro "file_copy" which removes any symlink in the destination dir that would be overwritten
SVN-Revision: 34437
Jo-Philipp Wich [Sun, 2 Dec 2012 11:27:23 +0000 (11:27 +0000)]
toolchain: remove duplicate default in bintutils Kconfig
SVN-Revision: 34436
Florian Fainelli [Fri, 30 Nov 2012 10:53:55 +0000 (10:53 +0000)]
remove support for ubicom32
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34432
Florian Fainelli [Fri, 30 Nov 2012 10:53:51 +0000 (10:53 +0000)]
kernel: remove references to TARGET_ubicom32
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34431
Florian Fainelli [Fri, 30 Nov 2012 10:53:47 +0000 (10:53 +0000)]
remove target
This target is unused, does not support any off the shelf hardware and
has been a maintenance burden for quite some time now.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34430
Florian Fainelli [Thu, 29 Nov 2012 21:43:05 +0000 (21:43 +0000)]
disable sstrip when using musl
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34427
Florian Fainelli [Thu, 29 Nov 2012 21:43:02 +0000 (21:43 +0000)]
remove Linux 3.3 support
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34426
Florian Fainelli [Thu, 29 Nov 2012 21:42:58 +0000 (21:42 +0000)]
gcc/4.5-linaro: backport musl patch
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34425
Florian Fainelli [Thu, 29 Nov 2012 21:42:53 +0000 (21:42 +0000)]
use a default kernel command-line to mount squashfs and jffs2
This fixes bug #9055.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34424
Steven Barth [Thu, 29 Nov 2012 20:33:17 +0000 (20:33 +0000)]
ipv6-support: Add conffiles section
SVN-Revision: 34423
Steven Barth [Thu, 29 Nov 2012 20:14:28 +0000 (20:14 +0000)]
ipv6-support: Add new IPv6-support meta-package
SVN-Revision: 34422
Steven Barth [Thu, 29 Nov 2012 20:14:23 +0000 (20:14 +0000)]
odhcp6c: Add new embedded DHCPv6 client
SVN-Revision: 34421
Steven Barth [Thu, 29 Nov 2012 20:14:18 +0000 (20:14 +0000)]
6distributed: add local IPv6 prefix distributor
SVN-Revision: 34420
Steven Barth [Thu, 29 Nov 2012 20:14:14 +0000 (20:14 +0000)]
6relayd: Fix some RFC 6204 compatibility issues
SVN-Revision: 34419
Steven Barth [Thu, 29 Nov 2012 20:14:09 +0000 (20:14 +0000)]
Remove old IPv6 sysctl-config (deprecated)
SVN-Revision: 34418
Steven Barth [Thu, 29 Nov 2012 20:14:04 +0000 (20:14 +0000)]
Remove default sysctl-entry for IPv6 here (races)
SVN-Revision: 34417
Gabor Juhos [Thu, 29 Nov 2012 17:58:28 +0000 (17:58 +0000)]
kernel: Fix 8139cp ring buffer initialisation, tx timeout recovery, add BQL
Patches queued upstream in net-next.git
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34415
Gabor Juhos [Thu, 29 Nov 2012 17:53:42 +0000 (17:53 +0000)]
ar71xx: switch to 3.6.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34414
Gabor Juhos [Thu, 29 Nov 2012 17:37:19 +0000 (17:37 +0000)]
kernel: Update Geos to 3.6.8
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34411
Gabor Juhos [Thu, 29 Nov 2012 17:37:18 +0000 (17:37 +0000)]
kernel: Add ATM fixes pending upstream merge (queue reduction, race fixes)
Patches about to go into net-next.git
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34410
Gabor Juhos [Thu, 29 Nov 2012 17:37:16 +0000 (17:37 +0000)]
kernel: Add missing CONFIG_BATTERY_DS2781 option to generic 3.6 config
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34409
Gabor Juhos [Thu, 29 Nov 2012 17:37:15 +0000 (17:37 +0000)]
build: Add TARGET_ROOTFS_RESERVED_PCT option to reduce wasted space
The genext2fs tool will 'reserve' 5% of the image size by default,
apparently by creating a huge lost+found directory. In fact it seemed to
be much more than 5% in practice — I saw an image with 8MiB used, and
recovered about 2MiB of it by deleting the 'empty' lost+found directory:
/dev/loop0 48377 8482 37438 19% /mnt/spare
# rmdir lost+found/
/dev/loop0 48377 6014 39906 14% /mnt/spare
This makes it configurable, but leaves it at the genext2fs default
of 5% for now. It should probably be changed to default to zero, but
that can be a separate patch.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34408
Gabor Juhos [Thu, 29 Nov 2012 17:37:14 +0000 (17:37 +0000)]
ramips: rt305x: add profile and build image for the Asus RT-N13U
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34407
Gabor Juhos [Thu, 29 Nov 2012 17:37:13 +0000 (17:37 +0000)]
ramips: rt305x: add user-space support for the Asus RT-N13U
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34406
Gabor Juhos [Thu, 29 Nov 2012 17:37:11 +0000 (17:37 +0000)]
ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Router
The work has been backported from openwrt-dreambox with
some modifications & code cleanup.
* updated config-3.3
* updated config-3.6
* renamed rt-n13 to rt-n13u
* fixed mach-rt-n13u.c
[juhosg: move user-space support and image generation into separate
patches]
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34405
Gabor Juhos [Thu, 29 Nov 2012 15:21:41 +0000 (15:21 +0000)]
remove common symbols from 3.6 configs
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34404
Gabor Juhos [Thu, 29 Nov 2012 15:21:35 +0000 (15:21 +0000)]
remove common symbols from 3.3 configs
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34403
Gabor Juhos [Thu, 29 Nov 2012 07:42:19 +0000 (07:42 +0000)]
kernel: update linux 3.6 to 3.6.8
Also refresh the affected patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34402
Luka Perkov [Thu, 29 Nov 2012 01:04:37 +0000 (01:04 +0000)]
uboot-kirkwood: build in $(BUILD_DIR)
SVN-Revision: 34401
Jo-Philipp Wich [Wed, 28 Nov 2012 21:02:53 +0000 (21:02 +0000)]
gettext-full: use shipped libxml for the host build, fixes lzma references from creeping in on certain distributions
SVN-Revision: 34400
Florian Fainelli [Tue, 27 Nov 2012 18:42:49 +0000 (18:42 +0000)]
use physmap-flash part_probe_types
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34398
Florian Fainelli [Tue, 27 Nov 2012 18:42:45 +0000 (18:42 +0000)]
image.mk: don't squash file permissions in JFFS2 images
Currently we call mkfs.jffs2 --squash, which will change
both file permissions and owners.
If we have some file with suid bits, it will clear these bits.
Thus it's enough to just squash file owners, by replacing that
argument to --squash-uids.
Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34397
Florian Fainelli [Tue, 27 Nov 2012 18:42:42 +0000 (18:42 +0000)]
Fix typo in 96338GW power LED.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34396
Florian Fainelli [Tue, 27 Nov 2012 18:42:39 +0000 (18:42 +0000)]
add AudioCodes AC495 SoC
Found in the AudioCodes Tulip AC494 ATA.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34395
Florian Fainelli [Tue, 27 Nov 2012 18:42:36 +0000 (18:42 +0000)]
do not call clk_put() on the timer clock
We don't support disabling the clock, but this is actually what it would do.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34394
Florian Fainelli [Tue, 27 Nov 2012 18:42:32 +0000 (18:42 +0000)]
do not list specific board compatible strings
The general practice is to use the general SoC compatible string in both the
DTS and the board specific .c file.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34393
Florian Fainelli [Tue, 27 Nov 2012 18:42:28 +0000 (18:42 +0000)]
remove unused variables from Makefile.boot
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34392
Jo-Philipp Wich [Tue, 27 Nov 2012 18:08:42 +0000 (18:08 +0000)]
trace-cmd: lazily evaluate extra plugins list, fixes stray build errors causing by missing operands to cp if the package was never built yet
SVN-Revision: 34390
Jo-Philipp Wich [Mon, 26 Nov 2012 16:03:40 +0000 (16:03 +0000)]
grub2: fix another case of gnulib failing under gnu libc
SVN-Revision: 34389
Hauke Mehrtens [Sun, 25 Nov 2012 20:11:15 +0000 (20:11 +0000)]
broadcom-wl: fix two problems when more then one wifi card is available.
* The device should get a unique name at the beginning and not wl%d.
* load the nvram just one time into the own buffer, also when there is
more than one device.
SVN-Revision: 34381
Gabor Juhos [Sun, 25 Nov 2012 17:20:49 +0000 (17:20 +0000)]
base-files: add support for the morse LED trigger
Write "delay" and "message" options to their respective files,
allowing Morse code message configuration through UCI.
The delay (dit length) defaults to 150ms (about 8 words per minute,
suitable for beginners).
Signed-off-by: Petr Viktorin <encukou@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34380
Hauke Mehrtens [Sun, 25 Nov 2012 16:41:00 +0000 (16:41 +0000)]
brcm47xx: fix title of Bcm4705-wl profile
SVN-Revision: 34378
projects / openwrt / staging / neocturne.git / log