staging: spectra: off by one

g_pBlockTable has only DeviceInfo.wDataBlockNum elements.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: keucr: check kmalloc() return value

kmalloc() may fail, if so return error code.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ti-st: mv headers to ti_wilink_st

move all the header information to ti_wilink_st.h.
This header would then not only serve the local modules like the st_core.c,
st_kim.c and st_ll.c but also the external modules/protocol drivers that are
dependent on the shared transport driver.
Modify the source files to include the new header ti_wilink_st.h,

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ti-st: set right the data types

replace uint and family by a much more proper u8/u16 types.
This is required specifically for data members of structures coming
in from the chip and data members parsed from the binary firmware file.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Fixing a race condition during initialization

The commit fixes a race condition in the initialization portion of the
driver. The problem was observed while testing with the kernel in the
staging-next tree. The wait on the ready event is signalled prematurely
before setting the arVersion.wlan_ver and arVersion.abi_ver. The code
waiting on this semaphore checks for the validity of these values and
hence may proceed with an un-updated values of these fields. The wakeup
signal is now sent after these values are set.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Fixing a compile error

The commit fixes a compilation error that was encountered while using
a specific kernel configuration file. The problem was the use of some
functions defined in <linux/semaphore.h> without including the header
file explicitly. It was probably working before because of the
dependency getting implicitly satisfied via some other header file.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Removing duplicate includes

Eliminating the inclusion of the same header file more than once.
The files being removed are already included by osapi_linux.h.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: fix printk() coding style issue in adl_pci9111.c

This is a patch to the adl_pci9111.c file that fixes all, printk() should
include KERN-facility level, warnings found by the checkpatch.pl tool

Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove unused update_BssList definition

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Introduce update_primary_addr to update mac address

set_primary_if is currently misused to update the mac address in vis
packets. This unneeded and introduces overhead due to other operations
which must be done when updating the primary interface.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Track references of batman_if in set_primary_if

set_primary_if exchanges the current primary interfaces with a new one.
This is a new reference and thus we have to count it and decrease the
count of the old primary interface.

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: count batman_if list queries as reference

The return of get_batman_if_by_netdev and get_active_batman_if leaks a
pointer from the rcu protected list of interfaces. We must protect it to
prevent a too early release of the memory. Those functions must increase
the reference counter before rcu_read_unlock or it may be to late to
prevent a free.

hardif_add_interface must also increase the reference count for the
returned batman_if to make the behaviour consistent.

Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Use refcnt to track usage count of batman_if

get_batman_if_by_netdev and get_active_batman_if may leak data from the
rcu protected list of interfaces. The rcu protected list of all gateway
nodes leaks the actual data outside the read-side critical area. This is
not valid as we may free the data using a call_rcu created callback
after we unlock using rcu_read_unlock. A workaround is to provide a
reference count to be sure that the memory isn't freed to early.

It is currently only to implement the already existing functionality and
doesn't provide the full tracking of all usage cases.

Additionally, we must hardif_hold inside the
rcu_read_lock()..rcu_read_unlock() before we attach to the structure
which "leaks" it. When another function now removed it from its usage
context (primary_if, usage on stack, ...) then we must hardif_put it. If
it is decremented to zero then we can issue the call_rcu to the freeing
function. So "put" is not allowed inside an rcu_read_lock.

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Use synchronize_rcu instead of call_rcu

It is recommended [1] to use synchronize_rcu to simplify the code -
especially when otherwise extra locking is needed to protect other code
from picking stale elements. It also protects us for emitting to many
callbacks which may results in OOM conditions.

The only reason not to use it, would be in performance critical sections
or when we are not allowed to block.

[1] Documentation/RCU/checklist.txt

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Remove unneeded rcu_read_lock

Regions which do not use rcu functions don't need to protected by
rcu_read_lock. If we want to protect data from being freed than it must
be covered by the same read-side critical section or otherwise the grace
period may already ended and freed the memory before we called
rcu_read_lock again.

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Always protect list_for_each_entry_rcu with RCU

receive_bat_packet is not called with rcu_read_lock so we must ensure by
ourself that we protect list_for_each_entry_rcu using the correct RCU
locks.

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Introduce if_list_lock to protect if_list

The update critical sections of if_list must be protected by a locking
primitive other than RCU. The iterator must also be protected by the
chosen locking mechanism.

The rtnl_lock in hardif_remove_interfaces must also be moved outside the
iterator primitive to ensure that we don't deadlock the kernel due to
differently nested locks in hardif_remove_interfaces and hard_if_event.

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: wait for call_rcu before unloading module

synchronize_rcu respective synchronize_net only waits for the rcu grace
period to elapse and we may fail to finish the calls which were made to
call_rcu in that time. In result the module could be unloaded during the
execution of the RCU callbacks.

rcu_barrier[1] will now wait for all outstanding RCU callbacks to finish
before continuing.

[1] Documentation/RCU/rcubarrier.txt

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Mark debugfs files as nonseekable

We don't allow to seek in the debugfs socket and log files. Thus we
should mark the file descriptor as nonseekable.

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Move mailing list address to .org

The official mailing list is run on lists.open-mesh.org and it should be
avoided to sent them to lists.open-mesh.net to reduce the number of
receipents and double posts.

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: checkpatch cleanup of comments

checkpatch now detects the start of a comment and warns about usage of
multiple spaces at the beginning of a line. We have to replace the '   '
in multiple lines comments by ' * ' to fix it.

Checkpatch also wants a comment after a definition of a spinlock_t which
describes what it protects. It is currently not possible to add it
before the actual struct which includes the spinlock.

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: Remove camel cases of vmbus packet buffer structures

Remove camel cases of vmbus packet buffer structures
 Remove camel cases of:
 struct VMBUS_CHANNEL_PACKET_PAGE_BUFFER
 struct VMBUS_CHANNEL_PACKET_MULITPAGE_BUFFER

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: octeon: '&pointer[0]' to 'pointer' fix

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rt2870: '&pointer[0]' to 'pointer' fix

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6655: '&pointer[0]' to 'pointer' fix

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: '&pointer[0]' to 'pointer' fix

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: cxt1e1: '&pointer[0]' to 'pointer' fix

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: otus: '&pointer[0]' to 'pointer' fix

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8712: '&pointer[0]' to 'pointer' fix

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: wlags49_h2: '&pointer[0]' to 'pointer' fix

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rt2860: '&pointer[0]' to 'pointer' fix

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: Use static const char * const where possible

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt665x: remove unused DEF definition

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ti-st: fix kim platform device id

Platform devices tend to have id as -1 when only 1 device exist and
a value >=0 when multiple devices exist, since we plan to store all
these platform devices if multiple exist, there was a requirement to
have id to be >=0.
The patch fixes this problem.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: use string native library

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: use native ctype library

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: usbip: resolved a space in a comment

Removed a space in a comments lines at #459

Signed-off-by: Agustin March <agustin.march@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: msm: Remove pr_<level> uses of KERN_<level>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: keucr: fix keucr lost disconnect

keucr lost the disconnect,
so keucr crash when plug-in and then plug-out SD-card quickly.

unmark the part of usb disconnect

Signed-off-by: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: Fixed indentation with spaces

Fixed the last 5 lines, indented with spaces, replacing spaces with tabs.

Signed-off-by: Clelia V. Korol <cvkorol@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: removed dummy errors like extra spaces

As reported by checkpatch.

Signed-off-by: Ema Cuevas <emacupk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: delete some parenthesis

I remove parenthesis for a return variable, and also delete a space and tab the code line

Signed-off-by: matias <munozmatiasn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: Space Added after definition of Variable MSG_LEVEL_INFO

Added an space after the definition of the variable MSG_LEVEL_INFO on line 43

Signed-off-by: Emanuel Mariano Ravera <ravera.emanuel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6656: removed not required parentheses.

Removed not required parentheses in return statements.

Signed-off-by: Diego H. Iglesias <diegohi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi: fix signess bug

ai_count and ao_counter are unsigned, check for < 0 doesn't make sense.
Cast them to int.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: crystalhd: fix signed bug

chd_dec_major is unsigned, so check chd_dec_major < 0 doesn't make sense.
Since it is used as signed, declare it as int.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: solo6010: fix signess bug

video_nr is unsigned, so check video_nr >= 0 doesn't make sense.
The only "negative" value may be -1, so explicitly check for it.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ST_BT depends on RFKILL

Fix kconfig unmet dependency warning:

warning: (ST_BT && STAGING && !STAGING_EXCLUDE_BUILD && BT) selects TI_ST which has unmet direct dependencies (RFKILL)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/bcm: fix build for CONFIG_PM not enabled

Handle build case of CONFIG_PM not being enabled.

drivers/staging/bcm/InterfaceInit.c:280: error: 'struct usb_device' has no member named 'autosuspend_delay'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/bcm: fix printk format warnings

Fix lots of printk format warnings in bcm.  Here is a sample of them:

drivers/staging/bcm/CmHost.c:1955: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
drivers/staging/bcm/CmHost.c:1955: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'long unsigned int'
drivers/staging/bcm/CmHost.c:1955: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
drivers/staging/bcm/LeakyBucket.c:85: warning: format '%d' expects type 'int', but argument 4 has type 'long int'
drivers/staging/bcm/LeakyBucket.c:85: warning: format '%d' expects type 'int', but argument 3 has type 'long int'
drivers/staging/bcm/LeakyBucket.c:85: warning: format '%d' expects type 'int', but argument 4 has type 'long int'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/keucr: fix build when CONFIG_PM is not enabled

keucr driver has a build error when CONFIG_PM is not enabled, so fix that.

drivers/staging/keucr/usb.c:42: error: 'struct us_data' has no member named 'suspend_resume_hook'
drivers/staging/keucr/usb.c:43: error: 'struct us_data' has no member named 'suspend_resume_hook'
drivers/staging/keucr/usb.c:64: error: 'struct us_data' has no member named 'suspend_resume_hook'
drivers/staging/keucr/usb.c:65: error: 'struct us_data' has no member named 'suspend_resume_hook'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/keucr: update TODO list and ask question about it

Update keucr TODO with additional work items.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: use '%pM' format to print MAC address

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: octeon: use '%pM' format to print MAC address

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: otus: use '%pM' format to print MAC address

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rt2870: use '%pM' format to print MAC address

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8712: use '%pM' format to print MAC address

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: cxt1e1: use '%pMF' format to print MAC address

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vt6655: use '%pM' format to print MAC address

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: wlags49_h2: use '%pM' format to print MAC address

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rt2860: change plain format of mac address to %pM in *printf()

There are many locations where MAC or BSSID is printed. The plain format
is used in such places. *printf() in kernel recognizes
%pM, %pMF and %pm format parameters to print out 6-byte array as MAC
address. This patch changes plain format to custom %pM which is widely
used in kernel.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: west bridge: pnand hal fixes

This patch includes changing some defines, necessary for compilation
with the linux-next tree.

Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: west bridge: cyasgadget, remove file system / vfs calls

This patch remove file system specific (fat_get_block) and vfs calls
from the cyasgadget driver. The current implementation expects user
space to write the file (open, seek to end, 1 byte write), followed by a
call to clear the dirty pages from the the page cache.

Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: west bridge: block driver api fix

This patch contains an update for cyasblkdev_queue.c which is needed for
the kernel update from 2.6.35 to 2.6.36.

Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: west bridge: Kconfig fix

This patch fixes the currently broken Kconfig for west bridge by
introducing a dependency on a valid HAL Layer for the driver build.

Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: fix macro coding style issue in adl_pci9111.c

This is a patch that fixes up, macros with multiple statements should be enclosed in a do - while loop, coding style issue in the adl_pci9111.c file found by the checkpatch.pl tool

Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: check kmalloc() return value

kmalloc() may fail, if so drop current packet.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Removed new introduced deadlock]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: removing redundant assignment of skb->dev

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Add rcu TODO

Paul E. McKenney informed us that rcu is misused by leaking pointers to
rcu related elements outside read-side protected critical sections.

He also recommended that it should be checked against the rcu checklist.

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Remove currently unused gw_* datastructures

gw_list_lock, gw_list and curr_gw are currently unused members of struct
bat_priv. They will be readded when gateway support is really
implemented.

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Always synchronize rcu's on module shutdown

During the module shutdown procedure in batman_exit(), a rcu callback is
being scheduled (batman_exit -> hardif_remove_interfaces ->
hardif_remove_interfae -> call_rcu). However, when the kernel unloads
the module, the rcu callback might not have been executed yet, resulting
in a "unable to handle kernel paging request" in __rcu_process_callback
afterwards, causing the kernel to freeze.

The synchronize_net and synchronize_rcu in mesh_free are currently
called before the call_rcu in hardif_remove_interface and have no real
effect on it.

Therefore, we should always flush all rcu callback functions scheduled
during the shutdown procedure using synchronize_net. The call to
synchronize_rcu can be omitted because synchronize_net already calls it.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: sca3000 convert byte order of ring buffer data

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: sca3000 fix sca3000_[show,store]_ring_bpse

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: ak8975: Add ak8975 magnetometer sensor

This is for the Asahi Kasei AK8975 3-axis magnetometer.  It resides within
the magnetometer section of the IIO subsystem, and implements the raw
magn_x,y,z_raw attributes, as well as magn_x,y,z_scale attributes for
converting to Gauss.

Changed to use the magn_x,y,z_scale attributes, and made those attributes
give the scale factor to conert to Gauss.  Also applied more fixes from
feedback.

Keeping mode as an unsigned long.  I'm going to add proper power management
at some point anyway, which would deprecate this attribute.

Signed-off-by: Andrew Chew <achew@nvidia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: Change GAIN macros to SCALE.

Per email exchange with Jonathan Cameron, GAIN should instead be SCALE, to
be consistent with documentation.

Resending, since this goes with the 2/2 patch.

Signed-off-by: Andrew Chew <achew@nvidia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: Convert vmbus driver interface function pointer table to constant

Convert vmbus driver interface function pointer table to constant
The vmbus interface functions are assigned to a constant - vmbus_ops.

Because the vmbus interface function pointer table is converted to a
constant variable -- vmbus_ops, the function GetChannelInterface(),
VmbusGetChannelInterface() and pointer GetChannelInterface are no longer
in use. The deprecated function's work is done by the initialization of
the newly added constant variable vmbus_ops.

I created the new constant variable vmbus_ops and removed the deprecated
function pointer GetChannelInterface in one patch.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix remaining checkpatch errors.

Remaining errors are due to the use of typedefs.  They should dissappear
once the typedefs get cleaned up.

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: trailing whitespace."

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: spaces required around that ..."

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: spaces prohibited around that ':' ..."

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: space required before that ..."

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: space required after that ..."

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: space required after that close brace"

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: space prohibited before ...close square bracket"

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: space prohibited after that ..."

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: need consistent spacing around '*'"

This patch fixes the real errors.  The rest are caused by typedefs
which will be fixed in a later patch.

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix 'ERROR: "(foo*)" should be "(foo *)"'

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: Macros w/ mult. statements ... do - while loop"

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: Macros w/ complex values ... parenthesis"

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: do not initialise statics to 0 or NULL"

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: do not initialise globals to 0 or NULL"

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: while should follow close brace '}'"

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: that open brace { ... prev line"

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: trailing statements should be on next line"

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: do not use assignment in if condition"

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: return is not a function, paren..."

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix "ERROR: open brace '{' following function dec..."

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix 'ERROR: "foo * bar" should be "foo *bar"'

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Fix URLs for firmware files.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: use '%pM' format to print MAC address

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Nohee Ko <noheek@broadcom.com>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>