drm/i915: move modesetting output/encoder code under display/

Add a new subdirectory for display code, and start off by moving
modesetting output/encoder code. Judging by the include changes, this is
a surprisingly clean operation.

v2:
- move intel_sdvo_regs.h too
- use tabs for Makefile file lists and sort them

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-2-jani.nikula@intel.com

drm/i915: make intel_sdvo_regs.h self-contained

Ensure intel_sdvo_regs.h is self-contained and remains that way.

v2:
- include <linux/compiler.h> for __packed (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613100818.24800-1-jani.nikula@intel.com

drm/i915/ehl: Update MOCS table for EHL

EHL defines two new MOCS table entries but is otherwise compatible with
the ICL MOCS table.

These table entries (16 and 17) should still be considered unused for
ICL and as such their behavior remains undefined for that platform.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530234014.22340-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Avoid tainting i915_gem_park() with wakeref.lock

While we need to flush the wakeref before parking, we do not need to
perform the i915_gem_park() itself underneath the wakeref lock, merely
the struct_mutex. If we rearrange the locks, we can avoid the unnecessary
tainting.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614220616.24932-1-chris@chris-wilson.co.uk

drm/i915: Replace engine->timeline with a plain list

To continue the onslaught of removing the assumption of a global
execution ordering, another casualty is the engine->timeline. Without an
actual timeline to track, it is overkill and we can replace it with a
much less grand plain list. We still need a list of requests inflight,
for the simple purpose of finding inflight requests (for retiring,
resetting, preemption etc).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-3-chris@chris-wilson.co.uk

drm/i915: Stop retiring along engine

We no longer track the execution order along the engine and so no longer
need to enforce ordering of retire along the engine.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-2-chris@chris-wilson.co.uk

drm/i915: Keep contexts pinned until after the next kernel context switch

We need to keep the context image pinned in memory until after the GPU
has finished writing into it. Since it continues to write as we signal
the final breadcrumb, we need to keep it pinned until the request after
it is complete. Currently we know the order in which requests execute on
each engine, and so to remove that presumption we need to identify a
request/context-switch we know must occur after our completion. Any
request queued after the signal must imply a context switch, for
simplicity we use a fresh request from the kernel context.

The sequence of operations for keeping the context pinned until saved is:

 - On context activation, we preallocate a node for each physical engine
   the context may operate on. This is to avoid allocations during
   unpinning, which may be from inside FS_RECLAIM context (aka the
   shrinker)

 - On context deactivation on retirement of the last active request (which
   is before we know the context has been saved), we add the
   preallocated node onto a barrier list on each engine

 - On engine idling, we emit a switch to kernel context. When this
   switch completes, we know that all previous contexts must have been
   saved, and so on retiring this request we can finally unpin all the
   contexts that were marked as deactivated prior to the switch.

We can enhance this in future by flushing all the idle contexts on a
regular heartbeat pulse of a switch to kernel context, which will also
be used to check for hung engines.

v2: intel_context_active_acquire/_release

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-1-chris@chris-wilson.co.uk

drm/i915: make intel_wakeref work on the rpm struct

intel_runtime_pm is the only thing they use from the i915 structure,
so use that directly.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-9-daniele.ceraolospurio@intel.com

drm/i915: update with_intel_runtime_pm to use the rpm structure

Matching the underlying get/put functions.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-8-daniele.ceraolospurio@intel.com

drm/i915: update rpm_get/put to use the rpm structure

The functions where internally already only using the structure, so we
need to just flip the interface.

v2: rebase

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-7-daniele.ceraolospurio@intel.com

drm/i915: move a few more functions to accept the rpm structure

Focusing on the functions called in few places.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-6-daniele.ceraolospurio@intel.com

drm/i915: move and rename i915_runtime_pm

Asserts aside, all the code working on this structure is in
intel_runtime_pm.c and uses the intel_ prefix, so move the
structure to intel_runtime_pm.h and adopt the same prefix.

Since all the asserts are now working on the runtime_pm structure,
bring them across as well.

v2: drop unneeded include (Chris), don't rename debugfs, rebase

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-5-daniele.ceraolospurio@intel.com

drm/i915: make enable/disable rpm assert function use the rpm structure

With this all the rpm assert-related functions consistently work on
the i915_runtime_pm structure

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-4-daniele.ceraolospurio@intel.com

drm/i915: Remove rpm asserts that use i915

Quite a few of the call points have already switched to the version
working directly on the runtime_pm structure, so let's switch over the
rest and kill the i915-based asserts.

v2: rebase

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-3-daniele.ceraolospurio@intel.com

drm/i915: prefer i915_runtime_pm in intel_runtime function

As a first step towards updating the code to work on the runtime_pm
structure instead of i915, rework all the internals to use and pass
around that.

v2: add comment for kdev (Jani), move rpm init after pdev init for
mock_device

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-2-daniele.ceraolospurio@intel.com

drm/i915: Add Wa_1409120013:icl,ehl

This chicken bit should be set before enabling FBC to avoid screen
corruption when the plane size has odd vertical and horizontal
dimensions.  It is safe to leave the bit set even when FBC is disabled.

v2:
 - The bspec's name for this bit on these platforms ("Spare 14") is
   pretty meaningless.  Let's rename the bit definition to something
   that more accurately reflects what the bit really does.  (Clint)

v3:
 - The chicken register was already defined (along with a few other
   gen9-specific bits) farther down.  Just add the new bit definition
   there.  (Clint)

Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612183631.30540-1-matthew.d.roper@intel.com
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>

drm/i915: Refine i915_reset.lock_map

We already use a mutex to serialise i915_reset() and wedging, so all we
need it to link that into i915_request_wait() and we have our lock cycle
detection.

v2.5: Take error mutex for selftests

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614071023.17929-3-chris@chris-wilson.co.uk

drm/i915: Execute signal callbacks from no-op i915_request_wait

If we enter i915_request_wait() with an already completed request, but
unsignaled dma-fence, signal the fence before returning. This allows us
to execute any of the signal callbacks at the earliest opportunity.

v2: Also signal after busyspin success

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614111053.25615-2-chris@chris-wilson.co.uk

drm/i915: Discard some redundant cache domain flushes

Since commit a679f58d0510 ("drm/i915: Flush pages on acquisition"), we
flush objects on acquire their pages and as such when we create an
object for the purpose of writing into it, we do not need to manually
flush.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614111053.25615-1-chris@chris-wilson.co.uk

drm/i915: Enable refcount debugging for default debug levels

refcount_t is our first line of defence against use-after-free, so let's
enable it for debugging.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613122842.4840-1-chris@chris-wilson.co.uk

drm/i915: Move fence register tracking from i915->mm to ggtt

As the fence registers only apply to regions inside the GGTT is makes
more sense that we track these as part of the i915_ggtt and not the
general mm. In the next patch, we will then pull the register locking
underneath the i915_ggtt.mutex.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073254.24048-1-chris@chris-wilson.co.uk

drm/i915: kerneldoc warnings squelched

drivers/gpu/drm/i915//gem/i915_gem_shrinker.c:142: warning: Function parameter or member 'shrink' not described in 'i915_gem_shrink'
drivers/gpu/drm/i915//gem/i915_gem_shrinker.c:142: warning: Excess function parameter 'flags' description in 'i915_gem_shrink'

drivers/gpu/drm/i915//intel_display.c:13443: warning: Function parameter or member '_state' not described in 'intel_atomic_check'
drivers/gpu/drm/i915//intel_display.c:13443: warning: Excess function parameter 'state' description in 'intel_atomic_check'

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612151311.30295-1-chris@chris-wilson.co.uk

drm/i915: Remove I915_READ16 and I915_WRITE16

Remove call sites in favour of uncore mmio accessors and remove the old
macros.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-6-tvrtko.ursulin@linux.intel.com

drm/i915: Remove I915_READ_NOTRACE

Only a few call sites remain which have been converted to uncore mmio
accessors and so the macro can be removed.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-5-tvrtko.ursulin@linux.intel.com

drm/i915: Remove I915_WRITE_NOTRACE

Only a few call sites remain which have been converted to uncore mmio
accessors and so the macro can be removed.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-4-tvrtko.ursulin@linux.intel.com

drm/i915: Remove POSTING_READ16

Only a few call sites remain which have been converted to uncore mmio
accessors and so the macro can be removed.

ENGINE_POSTING_READ16 is added to replace one engine->mmio_base relative
call site.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-3-tvrtko.ursulin@linux.intel.com

drm/i915: Remove I915_POSTING_READ_FW

Only a few call sites remain which have been converted to uncore mmio
accessors and so the macro can be removed.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-2-tvrtko.ursulin@linux.intel.com

drm/i915: Remove I915_READ8

Only a few call sites remain which have been converted to uncore mmio
accessors and so the macro can be removed.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-1-tvrtko.ursulin@linux.intel.com

drm/i915: Combine unbound/bound list tracking for objects

With async binding, we don't want to manage a bound/unbound list as we
may end up running before we even acquire the pages. All that is
required is keeping track of shrinkable objects, so reduce it to the
minimum list.

Fixes: 6951e5893b48 ("drm/i915: Move GEM object domain management from struct_mutex to local")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612105720.30310-1-chris@chris-wilson.co.uk

drm/i915: Kill INTEL_SUBPLATFORM_AML

All AML parts are either KBL ULX or CFL ULX so there is no point
in keeping INTEL_SUBPLATFORM_AML around. As these are the only
CFL ULX parts (normal CFL didn't have Y SKUs) so we'll just
replace IS_AML_ULX with IS_CFL_ULX (it was already paired with
IS_KBL_ULX which accounts for the other half of the AML parts).

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605162946.19223-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Add missing commas to the end of the subplatform ID arrays

Add a comma after the final entry to make diffs less obnoxious if
we have to add further entries past the last one.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605162946.19223-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #irc

drm/i915: Improve WRPLL reference clock readout on HSW/BDW

On non-ULT HSW the "special" WRPLL reference clock select
actually means non-SSC. Take that into account when reading
out the WRPLL state.

Also the non-SSC reference may be either 24MHz or 135MHz,
which we can read out from FUSE_STRAP3. The BDW docs actually
say: "also indicates whether the CPU and PCH are in a single
package or separate packages", so it may be that this is not
actually required and we could just assume 135 MHz (just like
the code already did). But it doesn't really hurt to read this
out as the HSW docs aren't quite so clear.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604200933.29417-5-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Assert that HSW/BDW LCPLL is using the non-SSC reference

Only the non-SSC reference is truly supported for the LCPLL. Assert
that it is indeed selected.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604200933.29417-4-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Nuke LC_FREQ

Get rid of the pointless LC_FREQ define.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604200933.29417-3-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Rename HSW/BDW PLL bits

Give the PLL control register bits better names on HSW/BDW.

v2: Fix the copy paste fails in SPLL_REF defines (Maarten)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610133609.27288-1-ville.syrjala@linux.intel.com
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc

drm/i915: Do not touch the PCH SSC reference if a PLL is using it

Our PCH refclk init code currently assumes that the PCH SSC reference
can only be used for FDI. That is not true and it can be used by
SPLL/WRPLL for eDP SSC or clock bending as well. Before we go
reconfiguring it let's make sure no PLL is currently using the PCH
SSC reference.

For some reason the hw is not particularly upset about losing
the clock if we immediately follow up with a modeset. Can't
really explain why nothing times out during the crtc disable
at least, but that's what the logs say. With fastboot the
story is quite different and we lose the entire display if
we turn off the PCH SSC reference when it's still being used.

Since we totally skip configuring the PCH SSC reference it
may not be in the proper state for FDI. Hopefully that won't
be a problem in practice.

We really should move this code to be part of the modeset seqeuence
and properly deal with the potentially conflicting requirements
imposed on PLL reference clocks. But that requires actual work.
Let's toss in a TODO for that.

v2: Pimp the commit message with the fastboot vs. not
    details

Cc: Julius B. <freedesktop@blln.gr>
Cc: Johannes Krampf <johannes.krampf@gmail.com>
Tested-by: Johannes Krampf <johannes.krampf@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108773
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604200933.29417-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Prevent lock-cycles between GPU waits and GPU resets

We cannot allow ourselves to wait on the GPU while holding any lock as we
may need to reset the GPU. While there is not an explicit lock between
the two operations, lockdep cannot detect the dependency. So let's tell
lockdep about the wait/reset dependency with an explicit lockmap.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612085246.16374-1-chris@chris-wilson.co.uk

drm/i915: Add a label for config DRM_I915_SPIN_REQUEST

If we don't give it a label, it does not appear as a configuration
option.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612093111.11684-9-chris@chris-wilson.co.uk

drm/i915/skl: use ranges for voltage level lookup

Like was done for ICL, let's convert the voltage level lookup to use
frequency ranges rather than individual frequencies. For deciding the
voltage, the individual value doesn't really matter.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610214847.9865-1-lucas.demarchi@intel.com

drm/i915/cnl: use ranges for voltage level lookup

Like was done for ICL, let's convert the voltage level lookup to use
frequency ranges rather than individual frequencies. For deciding the
voltage, the individual value doesn't really matter.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610214834.9789-1-lucas.demarchi@intel.com

drm/i915/icl: use ranges for voltage level lookup

Spec shows voltage level 0 as 307.2, 312, or lower and suggests to use
range checks. Prepare for having other frequencies in these ranges by
not comparing the exact frequency.

v2: invert checks by comparing biggest cdclk first (suggested by Ville)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610214819.9703-1-lucas.demarchi@intel.com

drm/i915: Make GuC GGTT reservation work on ggtt

These functions operate on ggtt so make them take that directly as
parameter.

At the same time move the USES_GUC conditional down to
intel_guc_reserve_ggtt_top for symmetry with
intel_guc_reserved_gtt_size.

v2:
 * Rename and move functions to be static in i915_gem_gtt.c (Michal)

v3:
 * Add comment explaining reason for reservation, add assert and fix
   error message. (Michal)

v4:
 * Fix checkpatch error.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611122350.15060-1-tvrtko.ursulin@linux.intel.com

drm/i915/guc: Move intel_guc_reserved_gtt_size to intel_wopcm_guc_size

Reduces pointer chasing and gets more to the point.

v2:
 * Tidy whitespace.
 * Tidy comment. (Michal)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611110044.7742-1-tvrtko.ursulin@linux.intel.com

drm/i915: Rename i915_hw_ppgtt to i915_ppgtt

Keeping the _hw_ in there does not help to distinguish it from its
only brethren i915_ggtt, so drop it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611091238.15808-2-chris@chris-wilson.co.uk

drm/i915: Pull kref into i915_address_space

Make the kref common to both derived structs (i915_ggtt and i915_ppgtt)
so that we can safely reference count an abstract ctx->vm address space.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611091238.15808-1-chris@chris-wilson.co.uk

drm/i915: Promote i915->mm.obj_lock to be irqsafe

The intent is to be able to update the mm.lists from inside an irqsoff
section (e.g. from a softirq rcu workqueue), ergo we need to make the
i915->mm.obj_lock irqsafe.

v2: can_discard_pages() ensures we are shrinkable
v3: Beware shadowing of 'flags'

Fixes: 3b4fa9640ccd ("drm/i915: Track the purgeable objects on a separate eviction list")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110869
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610145430.17717-1-chris@chris-wilson.co.uk

drm/i915: Allow interrupts when taking the timeline->mutex

Before we commit ourselves to writing commands into the
ringbuffer and submitting the request, allow signals to interrupt
acquisition of the timeline mutex. We allow ourselves to be interrupted
at any time later if we need to block for space in the ring, anyway.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610103610.19883-1-chris@chris-wilson.co.uk

drm/i915: Make read_subslice_reg take engine

The function operates on the render engine so make the input reflect it.

v2:
 * Pass engine to read_subslice_reg. (Chris)
 * Drop inline from read_subslice_reg.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610125706.26110-1-tvrtko.ursulin@linux.intel.com

drm/i915: Remove I915_READ64 and I915_READ64_32x2

Now that all their users are gone we can remove the macros and
accompanying duplicated comment.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-6-tvrtko.ursulin@linux.intel.com

drm/i915: Convert intel_read_wm_latency to uncore mmio accessors

More implicit dev_priv removal.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-5-tvrtko.ursulin@linux.intel.com

drm/i915: Convert gem_record_fences to uncore mmio accessors

More implicit dev_priv removal.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-4-tvrtko.ursulin@linux.intel.com

drm/i915: Convert icl_get_stolen_reserved to uncore mmio accessors

More removal of implicit dev_priv.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-3-tvrtko.ursulin@linux.intel.com

drm/i915: Convert i915_reg_read_ioctl to use explicit mmio accessors

No excuse for code located in intel_uncore.c to not use intel_uncore_
helpers.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-2-tvrtko.ursulin@linux.intel.com

drm/i915: Eliminate unused mmio accessors

On the path of removing mmio accessors with implicit dev_priv, easy first
step is to remove all such unused macros.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-1-tvrtko.ursulin@linux.intel.com

drm/i915/perf: fix whitelist on Gen10+

Gen10 added an additional NOA_WRITE register (high bits) and we forgot
to whitelist it for userspace.

Fixes: 95690a02fb5d96 ("drm/i915/perf: enable perf support on CNL")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190601225845.12600-1-lionel.g.landwerlin@intel.com

drm/i915: Move i915_check_and_clear_faults to intel_reset.c

The code is logically about reset so it makes sense.

It also enables making i915_clear_error_registers static.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607115932.20271-1-tvrtko.ursulin@linux.intel.com

drm/i915: Grammar s/the its/its/

Fix the grammar.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607113118.14645-1-geert+renesas@glider.be

drm/i915/frontbuffer: remove obsolete comment about mark busy/idle

This no longer exists.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606122203.13416-4-jani.nikula@intel.com

drm/i915: move more atomic plane declarations to intel_atomic_plane.h

Some function declarations in intel_drv.h were missed when
intel_atomic_plane.h was created.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606122203.13416-3-jani.nikula@intel.com

drm/i915: remove some unused declarations from intel_drv.h

intel_mark_busy(), intel_mark_idle(), and skl_cdclk_get_vco() no longer
exist.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606122203.13416-2-jani.nikula@intel.com

drm/i915: move pm related declarations to intel_pm.h

Move more missed declarations from i915_drv.h to intel_pm.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606122203.13416-1-jani.nikula@intel.com

drm/i915/wopcm: update default size for gen11+

The size has been increased to 2MB starting from Gen11. GuC and HuC FWs
fit in 1MB so we were fine even with the legacy define, but let's still
move to the correct one before the blobs grow to avoid being caught off
guard in the future.

v2: return early if the platform doesn't have GuC, fix nits (Michal)

Bspec: 12690
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
[ickle: use SZ consistently]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606224225.14287-2-daniele.ceraolospurio@intel.com

drm/i915/guc: always use Command Transport Buffers

Now that we've moved the Gen9 GuC blobs to version 32 we have CTB
support on all gens, so no need to restrict the usage to Gen11+.
Note that MMIO communication is still required for CTB initialization.

v2: fix commit message nits (Michal)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606224225.14287-1-daniele.ceraolospurio@intel.com

drm/i915/dsi: Read back pclk set by GOP and use that as pclk (v3)

The GOP sometimes initializes the pclk at a (slightly) different frequency
then the pclk which we've calculated.

This commit makes the DSI code read-back the pclk set by the GOP and
if that is within a reasonable margin of the calculated pclk, uses
that instead.

This fixes the first modeset being a full modeset instead of a
fast modeset on systems where the GOP pclk is different.

Changes in v2:
-Use intel_encoder_current_mode() to get the pclk setup by the GOP

Changes in v3:
-Back to the readback approach, skipping the dsi_pll.ctrl / .dev checks
 in intel_pipe_config_compare() when adjust is set leads to:
 [drm:pipe_config_err [i915]] *ERROR* mismatch in dsi_pll.ctrl (...)
 [drm:pipe_config_err [i915]] *ERROR* mismatch in dsi_pll.div (...)
-Do the readback and pclk overriding from vlv_dsi_init(), rather then from
 intel_dsi_vbt_init() as the vbt code should not be touching the hw

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605181735.7020-3-hdegoede@redhat.com

drm/i915/dsi: Move vlv/icl_dphy_param_init call out of intel_dsi_vbt_init (v2)

The vlv/icl_dphy_param_init calls do various calculations to set dphy
parameters based on the pclk.

Move the calling of vlv/icl_dphy_param_init to vlv_dsi_init to give
vlv_dsi_init a chance to tweak the pclk before these calculations are done.

Changes in v2:
-Also moves the icl and vlv specific dphy_param_init functions from the
 generic intel_dsi_vbt.c file into the icl_ and vlv_dsi.c specific files.

Note icl_dphy_param_init() and vlv_dphy_param_init() are only moved,
otherwise they are completely unchanged.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605181735.7020-2-hdegoede@redhat.com

drm/i915/dsi: Move logging of DSI VBT parameters to a helper function

This is a preparation patch for moving the calling of *_dphy_param_init()
out of intel_dsi_vbt_init.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605181735.7020-1-hdegoede@redhat.com

drm/i915/sdvo: Actually print the reason why the SDVO command failed

It's much easier to figure out why the SDVO encoder refuses to cooperate
if we can see what status we got back.

v2: Zero initialize only the first character, not the whole buffer

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190410170941.28142-1-ville.syrjala@linux.intel.com

drm/i915/sdvo: Don't write stack garbage into the hbuf

Pass the length returned by hdmi_infoframe_pack_only() to
intel_sdvo_write_infoframe() so that we don't end up writing
stack garbage into the hbuf.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-7-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/sdvo: Don't unpack stack garbage

Pass the length returned by intel_sdvo_read_infoframe() to
hdmi_infoframe_unpack() so that we don't try to unpack any
leftover stack garbage.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-6-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/sdvo: Check that we have space for the infoframe

Before we go writing the infoframe let's make sure we have
the space for it. Not that it really matters since the write
loop would just terminate early in that case.

v2: Check after the debug print and ++ (Chris)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410170835.18867-1-ville.syrjala@linux.intel.com
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>

drm/i915: Rename SDVO_AUDIO_ENABLE to HDMI_AUDIO_ENABLE

The "audio enable" bit on the SDVO/HDMI control register is only meant
for HDMI. Audio is never delivered over the SDVO bus. Rename the define
to reflect this fact.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-4-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/sdvo: Implement proper HDMI audio support for SDVO

Our SDVO audio support is pretty bogus. We can't push audio over the
SDVO bus, so trying to enable audio in the SDVO control register doesn't
do anything. In fact it looks like the SDVO encoder will always mix in
the audio coming over HDA, and there's no (at least documented) way to
disable that from our side. So HDMI audio does work currently on gen4
but only by luck really. On gen3 it got broken by the referenced commit.
And what has always been missing on every platform is the ELD.

To pass the ELD to the audio driver we need to write it to magic buffer
in the SDVO encoder hardware which then gets pulled out via HDA in the
other end. Ie. pretty much the same thing we had for native HDMI before
we started to just pass the ELD between the drivers. This sort of
explains why we even have that silly hardware buffer with native HDMI.

$ cat /proc/asound/card0/eld#1.0
-monitor_present 0
-eld_valid 0
+monitor_present 1
+eld_valid 1
+monitor_name LG TV
+connection_type HDMI
+...

This also fixes our state readout since we can now query the SDVO
encoder about the state of the "ELD valid" and "presence detect"
bits. As mentioned those don't actually control whether audio
gets sent over the HDMI cable, but it's the best we can do. And with
the state checker appeased we can re-enable HDMI audio for gen3.

Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: zardam@gmail.com
Tested-by: zardam@gmail.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108976
Fixes: de44e256b92c ("drm/i915/sdvo: Shut up state checker with hdmi cards on gen3")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915/sdvo: Fix AVI infoframe TX rate readout

The AVI infoframe readout code currently issues a
SDVO_CMD_GET_HBUF_TXRATE before SDVO_CMD_SET_HBUF_INDEX, which is
not the correct order for these two operations. So far this wasn't
a problem since we left the index pointing at the AVI infoframe
buffer at the end of the modeset. However once we start to write
to other buffers (namely ELD) that is no longer going to be true.
Fix up the order so that we always read out the TX rate for the
correct buffer.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Fix per-pixel alpha with CCS

We forgot to set .has_alpha=true for the A+CCS formats when the code
started to consult .has_alpha. This manifests as A+CCS being treated
as X+CCS which means no per-pixel alpha blending. Fix the format
list appropriately.

Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Heinrich Fink <heinrich.fink@daqri.com>
Reported-by: Heinrich Fink <heinrich.fink@daqri.com>
Tested-by: Heinrich Fink <heinrich.fink@daqri.com>
Fixes: b20815255693 ("drm/i915: Add plane alpha blending support, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603142500.25680-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Drop pointless WARN_ON

intel_dp_link_down() is static and it's only called from the pre-ddi
DP functions, so having a WARN_ON(HAS_DDI) in there is quite pointless.
Remove it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604140214.9947-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Move intel_dp->prepare_link_train assignment into ddi code

It's a bit silly to go through intel_dp.c to assign the
prepare_link_train vfunc for ddi platforms when we can just
assign it directly from intel_ddi.c.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604140214.9947-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Tidy intel_execlists_submission_init

Get to uncore from the engine for better logic organization and use
already available i915 everywhere.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607084521.16845-2-tvrtko.ursulin@linux.intel.com

drm/i915: Convert some more bits to use engine mmio accessors

Remove a couple dev_priv locals as a consequence.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607084521.16845-1-tvrtko.ursulin@linux.intel.com

drm/i915: Unexport i915_gem_init/fini_aliasing_ppgtt

These two are only used from within i915_gem_gtt.c and can trivially be
made static.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607082557.31670-5-tvrtko.ursulin@linux.intel.com

drm/i915: Extract engine fault reset to a helper

Just tidying the flow a bit.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607082557.31670-4-tvrtko.ursulin@linux.intel.com

drm/i915: Make Gen6/7 RING_FAULT_REG access engine centric

Similar to earlier conversions, eliminate the implicit dev_priv by
introducing some helpers which take the engine parameter (since the
register itself is per engine).

v2:
 * Always use parentheses in macro arguments.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607101535.767-1-tvrtko.ursulin@linux.intel.com

drm/i915: Tidy engine mask types in hangcheck

We can use intel_engine_mask_t to align with the rest of the codebase.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607082557.31670-2-tvrtko.ursulin@linux.intel.com

drm/i915: Reset only affected engines when handling error capture

Pass down the engine mask to i915_clear_error_registers so only affected
engines can be reset on the Gen6/7 path.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607082557.31670-1-tvrtko.ursulin@linux.intel.com

drm/i915/dmc: protect against reading random memory

While loading the DMC firmware we were double checking the headers made
sense, but in no place we checked that we were actually reading memory
we were supposed to. This could be wrong in case the firmware file is
truncated or malformed.

Before this patch:
# ls -l /lib/firmware/i915/icl_dmc_ver1_07.bin
-rw-r--r-- 1 root root  25716 Feb  1 12:26 icl_dmc_ver1_07.bin
# truncate -s 25700 /lib/firmware/i915/icl_dmc_ver1_07.bin
# modprobe i915
# dmesg| grep -i dmc
[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
[drm] Finished loading DMC firmware i915/icl_dmc_ver1_07.bin (v1.7)

i.e. it loads random data. Now it fails like below:
[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
[drm:csr_load_work_fn [i915]] *ERROR* Truncated DMC firmware, rejecting.
i915 0000:00:02.0: Failed to load DMC firmware i915/icl_dmc_ver1_07.bin. Disabling runtime power management.
i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915

Before reading any part of the firmware file, validate the input first.

Fixes: eb805623d8b1 ("drm/i915/skl: Add support to load SKL CSR firmware.")
Cc: stable@vger.kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605235535.17791-1-lucas.demarchi@intel.com

drm/i915: Report an earlier wedged event when suspending the engines

On i915_gem_load_power_context() we do care whether or not we succeed in
completing the switch back to the kernel context (via idling the
engines). Currently, we detect if an error occurs while we wait, but we
do not report one if it occurred beforehand (and the status of the
switch is undefined). Check the current terminally wedged status on
entering the wait, and report it after flushing the requests, as if it
had occurred during our own wait.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110824
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531113245.30042-1-chris@chris-wilson.co.uk

drm/i915: Skip context_barrier emission for unused contexts

The intent was to skip unused HW contexts by checking ce->state.
However, this only works for execlists where the ppGTT pointers is
stored inside the HW context. For gen7, the ppGTT is alongside the
logical state and must be updated on all active engines but, crucially,
only on active engines. As we need different checks, and to keep
context_barrier_task() agnostic, pass in the predicate.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110836
Fixes: 62c8e423450d ("drm/i915: Skip unused contexts for context_barrier_task()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604152408.24468-1-chris@chris-wilson.co.uk

drm/i915: Move object close under its own lock

Use i915_gem_object_lock() to guard the LUT and active reference to
allow us to break free of struct_mutex for handling GEM_CLOSE.

Testcase: igt/gem_close_race
Testcase: igt/gem_exec_parallel
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606112320.9704-1-chris@chris-wilson.co.uk

drm/i915: fix documentation build warnings

Just a straightforward bag of fixes for a clean htmldocs build.

Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605095657.23601-2-jani.nikula@intel.com

Documentation/i915: Fix kernel-doc references to moved gem files

The error messages could be more descriptive, but fix these caused by
file moves:

WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -internal
    ./drivers/gpu/drm/i915/i915_gem_shrinker.c' failed with return code 2
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -function
    User command execution ./drivers/gpu/drm/i915/i915_gem_execbuffer.c'
    failed with return code 1
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -internal
    ./drivers/gpu/drm/i915/i915_gem_tiling.c' failed with return code 2
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -function
    buffer object tiling ./drivers/gpu/drm/i915/i915_gem_tiling.c'
    failed with return code 1

Fixes: 10be98a77c55 ("drm/i915: Move more GEM objects under gem/")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605095657.23601-1-jani.nikula@intel.com

drm/i915/ehl: Support HBR3 on EHL combo PHY

Unlike ICL, EHL's combo PHYs can support HBR3 data rates.  Note that
this just extends the upper limit; we will continue to honor the max
data rate specified in the VBT in cases where it is lower than HBR3.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605211832.23945-1-matthew.d.roper@intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915/dsi: Use a fuzzy check for burst mode clock check

Prior to this commit we fail to init the DSI panel on the GPD MicroPC:
https://www.indiegogo.com/projects/gpd-micropc-6-inch-handheld-industry-laptop#/

The problem is intel_dsi_vbt_init() failing with the following error:
*ERROR* Burst mode freq is less than computed

The pclk in the VBT panel modeline is 70000, together with 24 bpp and
4 lines this results in a bitrate value of 70000 * 24 / 4 = 420000.
But the target_burst_mode_freq in the VBT is 418000.

This commit works around this problem by adding an intel_fuzzy_clock_check
when target_burst_mode_freq < bitrate and setting target_burst_mode_freq to
bitrate when that checks succeeds, fixing the panel not working.

Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524174028.21659-2-hdegoede@redhat.com

drm/i915/bios: add an enum for BDB block IDs

Better grouping, better semantics for find_section(). No functional
changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/192cc8a45cb5c36ccbde25a725df135793a4263f.1559308269.git.jani.nikula@intel.com

drm/i915/bios: add more LFP options

Add new fields in the LFP block. No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9a7f41aab894d7e96d8ad4776cf14f94cfd17d04.1559308269.git.jani.nikula@intel.com

drm/i915/bios: add VBT swing bit to child device definition

New bit to look in another BDB block for more. No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7ab46e3f53fd2c12cb60b9eabbebb65b27004a9e.1559308269.git.jani.nikula@intel.com

drm/i915/bios: sort BDB block definitions using block ID

Make it easier to find the right blocks. No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/56e1989940d83a670d087d531b7b6aa5dc4c0228.1559308269.git.jani.nikula@intel.com

drm/i915/bios: add BDB block comments before definitions

Use the comments verbatim from the spec to help find the right block. No
functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/52c32be96bd605d7a9f94accbd4dbe7718849f93.1559308269.git.jani.nikula@intel.com

drm/i915/bios: reserve struct bdb_ prefix for BDB blocks

Don't use bdb_ prefixes for structs within blocks. Add a new bdb struct
for SDVO panel DTDs for completeness.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cd062ced1bbbe07e087212b42c83e5ac64a22a49.1559308269.git.jani.nikula@intel.com

drm/i915/bios: remove unused, obsolete VBT definitions

We've carried this baggage for more than a decade. Time to let it go.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/00058e6507aa7a62fce1d2a6de223cbbfabb204b.1559308269.git.jani.nikula@intel.com

drm/i915/bios: clean up VBT port info debug logging

Change the order, add some stylistic touches, and add LSPCON.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3c9aaedcacaeaca24b2a35bf2af680dd118823d4.1559308269.git.jani.nikula@intel.com

drm/i915/bios: use port info child pointer to determine LSPCON presence

Avoid iterating the child devices. This should be a non-functional
change, but theoretically this might enable LSPCON on some extra ports
with buggy VBTs.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4bbaff16abb3461ccb67abf1537f68bb50823390.1559308269.git.jani.nikula@intel.com