[PATCH] S3C2410 GPIO wrappers

Arch-neutral GPIO calls for S3C24xx.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] SA1100 GPIO wrappers

Arch-neutral GPIO calls for SA-1100.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] PXA GPIO wrappers

Arch-neutral GPIO calls for PXA.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] AT91 GPIO wrappers

This is a first cut at making the AT91 code use the generic GPIO calls.

Note that the original AT91 GPIO calls merged the "mux pin as GPIO" and "set
GPIO direction" functionality into one API call, contrary to what's specified
as a cross-platform portable model.  So this involved a few non-inlinable
functions.

[akpm@osdl.org: cleanups]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] OMAP GPIO wrappers

This teaches OMAP how to implement the cross-platform GPIO interfaces.

[akpm@osdl.org: cleanups]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] GPIO core

This defines a simple and minimalist programming interface for GPIO APIs:

  - Documentation/gpio.txt ... describes things (read it)

  - include/asm-arm/gpio.h ... defines the ARM hook, which just punts
    to <asm/arch/gpio.h> for any implementation

  - include/asm-generic/gpio.h ... implement "can sleep" variants as calling
    the normal ones, for systems that don't handle i2c expanders.

The immediate need for such a cross-architecture API convention is to support
drivers that work the same on AT91 ARM and AVR32 AP7000 chips, which embed many
of the same controllers but have different CPUs.  However, several other users
have been reported, including a driver for a hardware watchdog chip and some
handhelds.org multi-CPU button drivers.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] EDAC: Add Fully-Buffered DIMM APIs to core

Eric Wollesen ported the Bluesmoke Memory Controller driver for the Intel
5000X/V/P (Blackford/Greencreek) chipset to the in kernel EDAC model.

This patch incorporates those required changes to the edac_mc.c and edac_mc.h
core files by added new Fully Buffered DIMM interface to the EDAC Core module.

Signed-off-by: eric wollesen <ericw@xmtp.net>
Signed-off-by: doug thompson <norsk5@xmission.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] EDAC: Add memory scrubbing controls API to core

This is an attempt of providing an interface for memory scrubbing control in
EDAC.

This patch modifies the EDAC Core to provide the Interface for memory
controller modules to implment.

The following things are still outstanding:

 - K8 is the first implemenation,

   The patch provide a method of configuring the K8 hardware memory scrubber
   via the 'mcX' sysfs directory.  There should be some fallback to a generic
   scrubber implemented in software if the hardware does not support
   scrubbing.

   Or .. the scrubbing sysfs entry should not be visible at all.

 - Only works with SDRAM, not cache,

   The K8 can scrub cache and l2cache also - but I think this is not so
   useful as the cache is busy all the time (one hopes).

   One would also expect that cache scrubbing requires hardware support.

 - Error Handling,

   I would like that errors are returned to the user in "terms of file
   system".

 - Presentation,

   I chose Bandwidth in Bytes/Second as a representation of the scrubbing
   rate for the following reasons:

   I like that the sysfs entries are sort-of textual, related to something
   that makes sense instead of magical values that must be looked up.

   "My People" wants "% main memory scrubbed per hour" others prefer "%
   memory bandwidth used" as representation, "bandwith used" makes it easy to
   calculate both versions in one-liner scripts.

   If one later wants to scrub cache, the scaling becomes wierd for K8
   changing from "blocks of 64 byte memory" to "blocks of 64 cache lines" to
   "blocks of 64 bit".  Using "bandwidth used" makes sense in all three cases,
   (I.M.O.  anyway ;-).

 - Discovery,

   There is no way to discover the possible settings and what they do
   without reading the code and the documentation.

   *I* do not know how to make that work in a practical way.

 - Bugs(??),

   other tools can set invalid values in the memory scrub control register,
   those will read back as '-1', requiring the user to reset the scrub rate.
   This is how *I* think it should be.

 - Afflicting other areas of code,

   I made changes to edac_mc.c and edac_mc.h which will show up globally -
   this is not nice, it would be better that the memory scrubbing fuctionality
   and interface could be entirely contained within the memory controller it
   applies to.

Frithiof Jensen

edac_mc.c and its .h file is a CORE helper module for EDAC
driver modules. This provides the abstraction for device specific
drivers. It is fine to modify this CORE to provide help for
new features of the the drivers

doug thompson

Signed-off-by: Frithiof Jensen <frithiof.jensen@ericson.com>
Signed-off-by: doug thompson <norsk5@xmission.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] EDAC: Fix in e752x mc driver

This fix/change returns the offset into the page for the ce/ue error, instead
of just 0.  The e752x dram controller reads 34:6 of the linear address with
the error.

Signed-off-by: Mike Chan <mikechan@google.com>
Signed-off-by: doug thompson <norsk5@xmission.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] EDAC: e752x byte access fix

The reading of the DRA registers should be a byte at a time (one register at a
time) instead of 4 bytes at a time (four registers).  Reading a dword at a
time retrieves erroneous information from all but the first register.  A
change was made to read in each register in a loop prior to using the data in
those registers.

Signed-off-by: Brian Pomerantz <bapper@mvista.com>
Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Doug Thompson <norsk5@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Andi Kleen <ak@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] EDAC: e752x bit mask fix

The fatal vs.  non-fatal mask for the sysbus FERR status is incorrect
according to the E7520 datasheet.  This patch corrects the mask to correctly
handle fatal and non-fatal errors.

Signed-off-by: Brian Pomerantz <bapper@mvista.com>
Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Doug Thompson <norsk5@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Andi Kleen <ak@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] pid: remove the now unused kill_pg kill_pg_info and __kill_pg_info

Now that I have changed all of the in-tree users remove the old version of
these functions.  This should make it clear to any out of tree users that they
should be using kill_pgrp kill_pgrp_info or __kill_pgrp_info instead.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] pid: remove now unused do_each_task_pid and while_each_task_pid

Now that I have changed all of the users remove the old version of these
functions.  This should be a clear hint to any out of tree users that they
should use do_each_pid_task and while_each_pid_task for new code.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] pid: replace do/while_each_task_pid with do/while_each_pid_task

There isn't any real advantage to this change except that it allows the old
functions to be removed.  Which is easier on maintenance and puts the code in
a more uniform style.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] tty: update the tty layer to work with struct pid

Of kernel subsystems that work with pids the tty layer is probably the largest
consumer.  But it has the nice virtue that the assiation with a session only
lasts until the session leader exits.  Which means that no reference counting
is required.  So using struct pid winds up being a simple optimization to
avoid hash table lookups.

In the long term the use of pid_nr also ensures that when we have multiple pid
spaces mixed everything will work correctly.

Signed-off-by: Eric W. Biederman <eric@maxwell.lnxi.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] pid: replace is_orphaned_pgrp with is_current_pgrp_orphaned

Every call to is_orphaned_pgrp passed in process_group(current) which is racy
with respect to another thread changing our process group.  It didn't bite us
because we were dealing with integers and the worse we would get would be a
stale answer.

In switching the checks to use struct pid to be a little more efficient and
prepare the way for pid namespaces this race became apparent.

So I simplified the calls to the more specialized is_current_pgrp_orphaned so
I didn't have to worry about making logic changes to avoid the race.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] pid: use struct pid for talking about process groups in exitc

Modify has_stopped_jobs and will_become_orphan_pgrp to use struct pid based
process groups.  This reduces the number of hash tables looks ups and paves
the way for multiple pid spaces.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] pid: make session_of_pgrp use struct pid instead of pid_t

To properly implement a pid namespace I need to deal exclusively in terms of
struct pid, because pid_t values become ambiguous.

To this end session_of_pgrp is transformed to take and return a struct pid
pointer.  To avoid the need to worry about reference counting I now require my
caller to hold the appropriate locks.  Leaving callers repsonsible for
increasing the reference count if they need access to the result outside of
the locks.

Since session_of_pgrp currently only has one caller and that caller simply
uses only test the result for equality with another process group, the locking
change means I don't actually have to acquire the tasklist_lock at all.

tiocspgrp is also modified to take and release the lock.  The logic there is a
little more complicated but nothing I won't need when I convert pgrp of a tty
to a struct pid pointer.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] signal: rewrite kill_something_info so it uses newer helpers

The goal is to remove users of the old signal helper functions so they can be
removed.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] signal: use kill_pgrp not kill_pg in the sunos compatibility code

I am slowly moving to a model where all process killing is struct pid based
instead of pid_t based.  The sunos compatibility code is one of the last users
of the old pid_t based kill_pg in the kernel.  By being complete I allow for
the future removal of kill_pg from the kernel, which will ensure I don't miss
something.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] tty: fix the locking for signal->session in disassociate_ctty

commit 24ec839c431eb79bb8f6abc00c4e1eb3b8c4d517 while fixing the locking for
signal->tty got the locking wrong for signal->session.  This places our
accesses of signal->session back under the tasklist_lock where they belong.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] tty: clarify disassociate_ctty

The code to look at tty_old_pgrp and send SIGHUP and SIGCONT when it is
present only executes when disassociate_ctty is called from do_exit.  Make
this clear by adding an explict on_exit check, and explicitly setting
tty_old_pgrp to 0.

In addition fix the locking by reading tty_old_pgrp under the siglock.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] tty: make __proc_set_tty static

The aim of this patch set is to start wrapping up the struct pid conversions.
As such this patchset culminates with the removal of kill_pg, kill_pg_info,
__kill_pg_info, do_each_task_pid, and while_each_task_pid.

kill_proc, daemonize, and kernel_thread are still in my sights but there is
still work to get to them.

The first three are basic cleanups around disassociate_ctty, while working on
converting it I found several issues.  tty_old_pgrp can be a tricky concept to
wrap your head around.

 1 tty: Make __proc_set_tty static.
 2 tty: Clarify disassociate_ctty
 3 tty: Fix the locking for signal->session in disassociate_ctty

These just stop using the old helper functions.

 4 signal: Use kill_pgrp not kill_pg in the sunos compatibility code.
 5 signal: Rewrite kill_something_info so it uses newer helpers.

Then the grind to convert the tty layer and all of it's helper functions to
struct pid.

 6 pid: Make session_of_pgrp use struct pid instead of pid_t.
 7 pid: Use struct pid for talking about process groups in exit.c
 8 pid: Replace is_orphaned_pgrp with is_current_pgrp_orphaned
 9 tty: Update the tty layer to work with struct pid.

A final helper function update.

10 pid: Replace do/while_each_task_pid with do/while_each_pid_task

And the removal of the functions that are now unused.
11 pid: Remove now unused do_each_task_pid and while_each_task_pid
12 pid: Remove the now unused kill_pg kill_pg_info and __kill_pg_info

All of these should be fairly simple and to the point.

This patch:

Currently all users of __proc_set_tty are in tty_io.c so make the function
static.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Minix V3 support

This morning I needed to read a Minix V3 filesystem, but unfortunately my
2.6.19 did not support that, and neither did the downloaded 2.6.20rc4.

Fortunately, google told me that Daniel Aragones had already done the work,
patch found at http://www.terra.es/personal2/danarag/

Unfortunaly, looking at the patch was painful to my eyes, so I polished it
a bit before applying.  The resulting kernel boots, and reads the
filesystem it needed to read.

Signed-off-by: Daniel Aragones <danarag@gmail.com>
Signed-off-by: Andries Brouwer <aeb@cwi.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] SPI eeprom driver

This is adds a simple SPI EEPROM driver, providing access to the EEPROM
through sysfs much like the I2C "eeprom" driver ...  except this driver
supports write access, and multiple EEPROM sizes.

From: "Tuppa, Walter" <walter.tuppa@siemens.com>

Since I have EEPROMs on SPI with different address sizing, I made some
changes to your at25.c to support them.  Works perfectly.  (Also includes a
small bugfix for the "what size address" test.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Walter Tuppa <walter.tuppa@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] RTC gets sysfs wakealarm attribute

This adds a new "wakealarm" sysfs attribute to RTC class devices which support
alarm operations and are wakeup-capable:

 - It reads as either empty, or the scheduled alarm time as seconds
   since the POSIX epoch.  (That time may already have passed, since
   nothing currently enforces one-shot alarm semantics.)

 - It can be written with an alarm time in the future, again seconds
   since the POSIX epoch, which enables the alarm.

 - It can be written with an alarm time not in the future (such as 0,
   the start of the POSIX epoch) to disable the alarm.

Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN":

    alarm after 10 minutes:
# echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm
    alarm tuesday evening 10pm:
# date -d '10pm tuesday' "+%s" > wakealarm
    disable alarm:
     # echo 0 > wakealarm

This resembles the /proc/acpi/alarm file in that nothing happens when the
alarm triggers ...  except possibly waking the system from sleep.  It's also
like that in a nasty way: not much can be done to prevent one task from
clobbering another task's alarm settings.

It differs from that file in that there's no in-kernel date parser.

Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't
set up correctly, so they won't yet behave with this attribute.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] SPI doc clarifications

This clarifies some aspects of the SPI programming interface, based on
feedback from Hans-Peter Nilsson.  The in-memory representation of words is
right-aligned, so for example a twelve bit word is stored using sixteen bits
with four undefined bits in the MSB.  And controller drivers must reject
protocol tweaking modes they do not support.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] SPI cleanup() method param becomes non-const

I'd like to assign NULL to kfree()d members of a structure.  I can't do
that without ugly casting (see the PXA patch) when the structure pointed to
is const-qualified.  I don't really see a reason why the cleanup method
isn't allowed to alter the object it should clean up.  :-)

No, I didn't test the PXA patch, but I verified that the NULL-assignment
doesn't stop me from doing rmmod/insmodding my own spi_bitbang-based
driver.

Signed-off-by: Hans-Peter Nilsson <hp@axis.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] spi_bitbang(): use overridable setup_transfer() method

A small bug-fix for spi_bitbang: it must always call the setup_transfer
function via the overridable pointer, not assume that its
spi_bitbang_setup_transfer is sufficient.  Otherwise, if all options in the
transfers are default (0), the overrided function will never be called.

Granted, the function replacing it must call spi_bitbang_setup_transfer,
but it might also have other important things to do, even if the second
argument (the spi_transfer) is NULL.  Tested together with the other
patches on the spi_crisv32_sser and spi_crisv32_gpio drivers (not yet in
the kernel, will IIUC be submitted as part of the usual
arch-maintainer-pushes).

Signed-off-by: Hans-Peter Nilsson <hp@axis.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] spi: remove return in spi_unregister_driver()

Make the spi_unregister_driver() code fit in with the rest of the header
file, and only do the action if the driver passed is non-NULL.

This also makes the code a line smaller.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] spi: documentation does not need to set driver's bus_type field

The spi_register_driver() sets the bus_type field of the spi_driver being
registered, so there is no need to have it set in the driver itself.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] spi: add spi_set_drvdata() and spi_get_drvdata()

Add wrappers for getting and setting the driver data using spi_device
instead of using dev_{get|set}_drvdata with &spi->dev, to mirror the
platform_{get|set}_drvdata.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] SPI: Freescale iMX SPI controller driver (BIS+)

Add the SPI controller driver for Freescale i.MX(S/L/1).
Main features summary:

 > Per chip setup via board specific code and/or protocol driver.
 > Per transfer setup.
 > PIO transfers.
 > DMA transfers.
 > Managing of NULL tx / rx buffer for rd only / wr only transfers.

This patch replace patch-2.6.20-rc4-spi_imx with the following changes:
 > Few cosmetic changes.
 > Function map_dma_buffers now return 0 for success and -1 for failure.
 > Solved a bug inside spi_imx_probe function (wrong error path).
 > Solved a bug inside setup function (bad undo setup for max_speed_hz).
 > For read-only transfers, always write zero bytes.

This is almost the same as the 'BIS' version sent by Andrea, except for
updating the 'DUMMY' byte so that read-only transfers shift out zeroes.
That part of the API changed recently, since some half duplex peripheral
chips require that semantic.

Signed-off-by: Andrea Paterniani <a.paterniani@swapp-eng.it>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] SPI controller driver for OMAP Microwire

This adds a SPI driver for the Microwire controller on OMAP1 chips.  This
driver has been used in the Linux-OMAP tree for some time now, including
with some of those displays using standardized 9-bit commands followed by
data with 8-bit words.

Microwire only supports half duplex transfers, but that's all that most SPI
protocols need.  When full duplex, or higher speeds, are needed there are
several other controllers that can be used on OMAP.

[akpm@osdl.org: cleanups]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] SPI Kconfig fix

Minor Kconfig cleanup ... put the SPI_S3C24XX entry in the
correct location (alphabetical order).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] DS1302: local_irq_disable() is redundant after local_irq_save()

drivers/char/ds1302.c::get_rtc_time() contains local_irq_disable() call
after local_irq_save(). This looks redundant.

drivers/char/ds1302.c::rtc_ioctl() contains local_irq_disable() call after
local_irq_save(). This looks redundant.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] drivers/isdn/gigaset: new M101 driver (v2)

This patch adds the line discipline based driver for the Gigaset M101
wireless RS232 adapter. It also improves the documentation a bit.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Hansjoerg Lipp <hjlipp@web.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] drivers/telephony/ixj: Convert to generic boolean

Convert:
BOOL  -> bool
FALSE -> false
TRUE  -> true

Change a variable ('mContinue') to boolean from char, since it is used
as boolean.

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Char: timers cleanup

- Use timer macros to set function and data members and to modify
  expiration time.
- Use DEFINE_TIMER for global timers and do not init them at run-time in
  these cases.
- del_timer_sync is common in most cases -- we want to wait for timer
  function if it's still running.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Fulghum <paulkf@microgate.com>
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Dmitry Torokhov <dtor@mail.ru> (Input bits)
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Char: specialix, isr have 2 params

specialix, isr have 2 params

pt_regs are no longer the third parameter of isr, call sx_interrupt without
it.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] change __init to __devinit in 2 rtc drivers

Change __init to __devinit in rtc drivers' probe functions.

Resolves MODPOST warnings:

WARNING: drivers/rtc/rtc-ds1553.o - Section mismatch: reference to
.init.text:ds1553_rtc_probe from .data.rel between 'ds1553_rtc_driver' (at
offset 0x0) and 'ds1553_nvram_attr'
WARNING: drivers/rtc/rtc-ds1742.o - Section mismatch: reference to
.init.text:ds1742_rtc_probe from .data.rel between 'ds1742_rtc_driver' (at
offset 0x0) and 'ds1742_nvram_attr'

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] export ufs_fs.h to userspace

Was ufs_fs.h purposefully not exported to userspace or did it just slip
through the cracks ?  assuming the latter scenario, the attached patch touches
up the relationship between ufs_fs.h and its sub headers (like ufs_fs_sb.h) so
that we can export it ...  the silo bootloader takes advantage of this header
for example.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] close_files(): add scheduling point

close_files() can sometimes take long enough to trigger the soft lockup
detector.

Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] drivers/isdn/gigaset: reduce kernel message spam

Reduce the number of kernel messages the Gigaset drivers produce in case of an
excessively long device response, from one per character exceeding the limit
to one per overlong message.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] drivers/isdn/gigaset: reduce mutex scope

Do not lock the cardstate structure mutex earlier than necessary.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] FS: speed up rw_verify_area()

oprofile hunting showed a stall in rw_verify_area(), because of triple
indirection and potential cache misses.
(file->f_path.dentry->d_inode->i_flock)

By moving initialization of 'struct inode' pointer before the pos/count
sanity tests, we allow the compiler and processor to perform two loads by
anticipation, reducing stall, without prefetch() hints.  Even x86 arch has
enough registers to not use temporary variables and not increase text size.

I validated this patch running a bench and studied oprofile changes, and
absolute perf of the test program.

Results of my epoll_pipe_bench (source available on request) on a Pentium-M
1.6 GHz machine

Before :
# ./epoll_pipe_bench -l 30 -t 20
Avg: 436089 evts/sec read_count=8843037 write_count=8843040 21.218390 samples
per call
(best value out of 10 runs)

After :
# ./epoll_pipe_bench -l 30 -t 20
Avg: 470980 evts/sec read_count=9549871 write_count=9549894 21.216694 samples
per call
(best value out of 10 runs)

oprofile CPU_CLK_UNHALTED events gave a reduction from 5.3401 % to 2.5851 %
for the rw_verify_area() function.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] com20020 build fix

Need to export com20020 symbols for com20020_cs also.

WARNING:  "com20020_found" [drivers/net/pcmcia/com20020_cs.ko] undefined!
WARNING:  "com20020_check" [drivers/net/pcmcia/com20020_cs.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Esben Nielsen <nielsen.esben@googlemail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] lockdep: forward declare struct task_struct

3117df0453828bd045c16244e6f50e5714667a8a causes this:

In file included from arch/s390/kernel/early.c:13:
include/linux/lockdep.h:300: warning:
"struct task_struct" declared inside parameter list
include/linux/lockdep.h:300:
warning: its scope is only this definition or
declaration, which is probably not what you want

Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] kexec: fix references to init in documentation for kexec

I've noticed that the boot options are not correct for in the documentation
for kdump.  The "init" keyword is not necessary, and causes a kernel panic
when booting with an initrd on Fedora 5.

[horms@verge.net.au: put original comment with the latest version of the patch]
Signed-off-by: Judith Lebzeelter <judith@osdl.org>
Acked-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] swiotlb uninlinings

Optimise swiotlb.c for size.

   text    data     bss     dec     hex filename
   5009      89      64    5162    142a lib/swiotlb.o-before
   4666      89      64    4819    12d3 lib/swiotlb.o-after

For some reason my gcc (4.0.2) doesn't want to tailcall these things.

swiotlb_sync_sg_for_device:
pushq %rbp #
movl $1, %r8d #,
movq %rsp, %rbp #,
call swiotlb_sync_sg #
leave
ret
.size swiotlb_sync_sg_for_device, .-swiotlb_sync_sg_for_device
.section .text.swiotlb_sync_sg_for_cpu,"ax",@progbits
.globl swiotlb_sync_sg_for_cpu
.type swiotlb_sync_sg_for_cpu, @function
swiotlb_sync_sg_for_cpu:
pushq %rbp #
xorl %r8d, %r8d #
movq %rsp, %rbp #,
call swiotlb_sync_sg #
leave
ret

Cc: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] atmel_serial: Use __raw I/O register access

Access to chip-internal registers should always be native-endian.  This is
especially important for AVR32 since it's a big-endian architecture and the
non-raw readl() and writel() macros are defined to do little-endian
accesses.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] warning fix: unsigned->signed

While compiling my code with -Wconversion using gcc-trunk, I always get a
bunch of warrning from headers, here is fix for them:

__getblk is alawys called with unsigned argument,
but it takes signed, the same story with __bread,__breadahead and so on.

Signed-off-by: Tomasz Kvarsin
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ipc: save the ipc namespace while reading proc files

The problem we were assuming that current->nsproxy->ipc_ns would never
change while someone has our file in /proc/sysvipc/ file open.  Given that
this can change with both unshare and by passing the file descriptor to
another process that assumption is occasionally wrong.

Therefore this patch causes /proc/sysvipc/* to cache the namespace and
increment it's count when we open the file and to decrement the count when
we close the file, ensuring consistent operation with no surprises.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] reiserfs: Use ARRAY_SIZE macro when appropriate

Use ARRAY_SIZE macro already defined in kernel.h

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] OSS: Use ARRAY_SIZE macro when appropriate (2)

Use ARRAY_SIZE macro already defined in kernel.h

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] OSS: Use ARRAY_SIZE macro when appropriate

Use ARRAY_SIZE macro already defined in kernel.h

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] w1: Use ARRAY_SIZE macro when appropriate

A patch to use ARRAY_SIZE macro already defined in kernel.h

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] kernel: shut up the IRQ mismatch messages

The problem is various drivers legally validly and sensibly try to claim
IRQs but the kernel insists on vomiting forth a giant irrelevant debugging
spew when the types clash.

Edit kernel/irq/manage.c go down to mismatch: in setup_irq() and ifdef out
the if clause that checks for mismatches.  It'll then just do the right
thing and work sanely.

For the current -mm kernel this will do the trick (and moves it into shared
irq debugging as in debug mode the info spew is useful).  I've had a
variant of this in my private tree for some time as I got fed up on the
mess on boxes where old legacy IRQs get reused.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Debug shared irqs

Drivers registering IRQ handlers with SA_SHIRQ really ought to be able to
handle an interrupt happening before request_irq() returns.  They also
ought to be able to handle an interrupt happening during the start of their
call to free_irq().  Let's test that hypothesis....

[bunk@stusta.de: Kconfig fixes]
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] inotify: read return val fix

Fix for inotify read bug (bugzilla.kernel.org #6999)

Problem Description:
When reading from an inotify device with an insufficient sized buffer, read(2)
will return 0 with no errno set. This is because of an logically incorrect
action from the user program thus should return an more logical value. My
suggestion is return -EINVAL as for bind(2).

This patch is based on the proposal from Ryan <wolf0403@hotmail.com>, and
feedback from John McCutchan <john@johnmccutchan.com>.

Return -EINVAL if we have not passed in enough buffer space to read a single
inotify event, rather than 0 which indicates that there is nothing to read.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: "John McCutchan" <john@johnmccutchan.com>
Cc: Ryan <wolf0403@hotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] remove sb->s_files and file_list_lock usage in dquot.c

Iterate over sb->s_inodes instead of sb->s_files in add_dquot_ref.  This
reduces list search and lock hold time aswell as getting rid of one of the
few uses of file_list_lock which Ingo identified as a scalability problem.

Previously we called dq_op->initialize for every inode handing of a
writeable file that wasn't initialized before.  Now we're calling it for
every inode that has a non-zero i_writecount, aka a writeable file
descriptor refering to it.

Thanks a lot to Jan Kara for running this patch through his quota test
harness.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] move remove_dquot_ref to dqout.c

Remove_dquot_ref can move to dqout.c instead of beeing in inode.c under
#ifdef CONFIG_QUOTA.  Also clean the resulting code up a tiny little bit by
testing sb->dq_op earlier - it's constant over a filesystems lifetime.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] scnprintf(): fix a comment

The return value of scnprintf() never exceeds @size.

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] fix the defaults mentioned in Documentation/nfsroot.txt

This patch fixes the documentation of nfsroot to match NFS_DEF_FILE_IO_SIZE.

Or perhaps we need to change NFS_DEF_FILE_IO_SIZE to match the
documentation?

Signed-off-by: Dan Aloni <da-x@monatomic.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] MAINTAINERS: remove two dead e-mail

Cyclades no longer serves the 2 e-mails listed in MAINTAINERS.  Remove them
and mark those entries as Orphaned.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] QUOTA: Have <linux/quota.h> include <linux/rwsem.h> explicitly

Since quota.h declares a R/W semaphore, it should include rwsem.h
explicitly.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] include/linux/kernel.h: Remove labs()

Remove labs() since it is not used/needed.

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Char: cyclades, use pci_device_id

Use pci_device_id struct instead of ushort array. Add MODULE_DEVICE_TABLE.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Char: use more PCI_DEVICE macro

Use more PCI_DEVICE macro

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Wim Van Sebroeck <wim@iguana.be> (alim7101_wdt.c part)
Cc: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Fix d_path for lazy unmounts

Here is a bugfix to d_path.

First, when d_path() hits a lazily unmounted mount point, it tries to
prepend the name of the lazily unmounted dentry to the path name.  It gets
this wrong, and also overwrites the slash that separates the name from the
following pathname component.  This is demonstrated by the attached test
case, which prints "getcwd returned d_path-bugsubdir" with the bug.  The
correct result would be "getcwd returned d_path-bug/subdir".

It could be argued that the name of the root dentry should not be part of
the result of d_path in the first place.  On the other hand, what the
unconnected namespace was once reachable as may provide some useful hints
to users, and so that seems okay.

Second, it isn't always possible to tell from the __d_path result whether
the specified root and rootmnt (i.e., the chroot) was reached: lazy
unmounts of bind mounts will produce a path that does start with a
non-slash so we can tell from that, but other lazy unmounts will produce a
path that starts with a slash, just like "ordinary" paths.

The attached patch cleans up __d_path() to fix the bug with overlapping
pathname components.  It also adds a @fail_deleted argument, which allows
to get rid of some of the mess in sys_getcwd().  Grabbing the dcache_lock
can then also be moved into __d_path().  The patch also makes sure that
paths will only start with a slash for paths which are connected to the
root and rootmnt.

The @fail_deleted argument could be added to d_path() as well: this would
allow callers to recognize deleted files, without having to resort to the
ambiguous check for the " (deleted)" string at the end of the pathnames.
This is not currently done, but it might be worthwhile.

Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Cc: Neil Brown <neilb@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] NTFS: rename incorrect check of NTFS_DEBUG with just DEBUG

Replace the incorrect debugging check of "#ifdef NTFS_DEBUG" with
just "#ifdef DEBUG".

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] register_blkdev(): don't hand out the LOCAL/EXPERIMENTAL majors

As pointed out in http://bugzilla.kernel.org/show_bug.cgi?id=7922, dynamic
blockdev major allocation can hand out majors which LANANA has defined as
being for local/experimental use.

Cc: Torben Mathiasen <device@lanana.org>
Cc: Greg KH <greg@kroah.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Tomas Klas <tomas.klas@mepatek.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] register_chrdev_region() don't hand out the LOCAL/EXPERIMENTAL majors

As pointed out in http://bugzilla.kernel.org/show_bug.cgi?id=7922, dynamic
chardev major allocation can hand out majors which LANANA has defined as being
for local/experimental use.

Cc: Torben Mathiasen <device@lanana.org>
Cc: Greg KH <greg@kroah.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Tomas Klas <tomas.klas@mepatek.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Make XFS use BH_Unwritten and BH_Delay correctly

Don't hide buffer_unwritten behind buffer_delay() and remove the hack that
clears unexpected buffer_unwritten() states now that it can't happen.

Signed-off-by: Dave Chinner <dgc@sgi.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Timothy Shimmin <tes@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Make BH_Unwritten a first class bufferhead flag V2

Currently, XFS uses BH_PrivateStart for flagging unwritten extent state in a
bufferhead.  Recently, I found the long standing mmap/unwritten extent
conversion bug, and it was to do with partial page invalidation not clearing
the unwritten flag from bufferheads attached to the page but beyond EOF.  See
here for a full explaination:

http://oss.sgi.com/archives/xfs/2006-12/msg00196.html

The solution I have checked into the XFS dev tree involves duplicating code
from block_invalidatepage to clear the unwritten flag from the bufferhead(s),
and then calling block_invalidatepage() to do the rest.

Christoph suggested that this would be better solved by pushing the unwritten
flag into the common buffer head flags and just adding the call to
discard_buffer():

http://oss.sgi.com/archives/xfs/2006-12/msg00239.html

The following patch makes BH_Unwritten a first class citizen.

Signed-off-by: Dave Chinner <dgc@sgi.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] mm: mincore anon

Make mincore work for anon mappings, nonlinear, and migration entries.
Based on patch from Linus Torvalds <torvalds@linux-foundation.org>.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Add NOPFN_REFAULT result from vm_ops->nopfn()

Add a NOPFN_REFAULT return code for vm_ops->nopfn() equivalent to
NOPAGE_REFAULT for vmops->nopage() indicating that the handler requests a
re-execution of the faulting instruction

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] add vm_insert_pfn()

Add a vm_insert_pfn helper, so that ->fault handlers can have nopfn
functionality by installing their own pte and returning NULL.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] null pointer dereference in appledisplay driver

Commit 40b20c257a13c5a526ac540bc5e43d0fdf29792a by Len Brown introduced
a null pointer dereference in the appledisplay driver. This patch fixes
it.

Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] one more iomap s390 build fix

Commit 9ac7849e35f705830f7b016ff272b0ff1f7ff759 causes this on S390:

  drivers/built-in.o: In function `dmam_noncoherent_release':
    dma-mapping.c:(.text+0x1515c): undefined reference to `dma_free_noncoherent'
  drivers/built-in.o: In function `dmam_free_noncoherent':
    undefined reference to `dma_free_noncoherent'
  drivers/built-in.o: In function `dmam_alloc_noncoherent':
    undefined reference to `dma_alloc_noncoherent'
  make: *** [.tmp_vmlinux1] Error 1

Cc: Tejun Heo <htejun@gmail.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cfq-iosched: improve continue or break logic in cfq_dispatch

This improves performance considerably for sync requests when you
have command queuing enabled.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

cfq-iosched: remove the implicit queue kicking in slice expire

We only really need it for a process going away, so move it to
those locations.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

cfq-iosched: check whether a queue timed out in accounting

Makes it more fair for the residual slice count.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

cfq-iosched: tweak the FIFO checking

We currently check the FIFO once per slice. Optimize that a bit and
only do it as the first thing for a new slice, so we don't end up
doing a single request and then seek to the FIFO requests.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

cfq-iosched: don't pass in queue for cfq_arm_slice_timer()

It must always be the active queue, otherwise it's a bug. So just
use the active_queue, don't pass it in explicitly.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

cfq-iosched: account for slice over/under time

If a slice uses less than it is entitled to (or perhaps more), include
that in the decision on how much time to give it the next time it
gets serviced.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

cfq-iosched: defer slice activation to first request being active

This better matches what time the queue is actually spending doing
IO.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

[PATCH] cfq-iosched: use last service point as the fairness criteria

Right now we use slice_start, which gives async queues an unfair
advantage. Chance that to service_last, and base the resorter
on that.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

cfq-iosched: document the cfqq flags

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

[PATCH] cfq-iosched: move on_rr check into cfq_resort_rr_list()

Move the on_rr check into cfq_resort_rr_list(), every call site
needs to check it anyway.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

cfq-iosched: remove cfq_io_context last_queue

It hasn't been used for a while, kill it off and remove the old
if 0 code chunk.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

elevator: don't sort reads between writes

Don't allow elv_dispatch_sort() to mix reads and writes together,
it's rarely a good idea.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

elevator: abstract out the activate and deactivate functions

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Merge git://oss.sgi.com:8090/xfs/xfs-2.6

* git://oss.sgi.com:8090/xfs/xfs-2.6: (33 commits)
  [XFS] Don't use kmap in xfs_iozero.
  [XFS] Remove a bunch of unused functions from XFS.
  [XFS] Remove unused arguments from the XFS_BTREE_*_ADDR macros.
  [XFS] Remove unused header files for MAC and CAP checking functionality.
  [XFS] Make freeze code a little cleaner.
  [XFS] Remove unused argument to xfs_bmap_finish
  [XFS] Clean up use of VFS attr flags
  [XFS] Remove useless memory barrier
  [XFS] XFS sysctl cleanups
  [XFS] Fix assertion in xfs_attr_shortform_remove().
  [XFS] Fix callers of xfs_iozero() to zero the correct range.
  [XFS] Ensure a frozen filesystem has a clean log before writing the dummy
  [XFS] Fix sub-block zeroing for buffered writes into unwritten extents.
  [XFS] Re-initialize the per-cpu superblock counters after recovery.
  [XFS] Fix block reservation changes for non-SMP systems.
  [XFS] Fix block reservation mechanism.
  [XFS] Make growfs work for amounts greater than 2TB
  [XFS] Fix inode log item use-after-free on forced shutdown
  [XFS] Fix attr2 corruption with btree data extents
  [XFS] Workaround log space issue by increasing XFS_TRANS_PUSH_AIL_RESTARTS
  ...

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: remove scan_keyb driver
  Input: i8042 - fix AUX IRQ delivery check
  Input: wistron - add support for Fujitsu-Siemens Amilo D88x0
  Input: inport - use correct config option for ATIXL
  Input: HIL - handle erros from input_register_device()
  Input: tsdev - schedule removal
  Input: add Atlas button driver
  Input: ads7846 - be more compatible with the hwmon framework
  Input: ads7846 - detect pen up from GPIO state
  Input: ads7846 - select correct SPI mode
  Input: ads7846 - switch to using hrtimer
  Input: ads7846 - optionally leave Vref on during differential measurements
  Input: ads7846 - pluggable filtering logic
  Input: gpio-keys - keyboard driver for GPIO buttons
  Input: hid-ff - add support for Logitech Momo racing wheel
  Input: i8042 - really suppress ACK/NAK during panic blink
  Input: pc110pad - return proper error

[PATCH] fix fatal kernel-doc error

Teach kernel-doc to handle functions that look like the new
pcim_iomap_table().  Fixes this fatal error in scripts/kernel-doc:

  DOCPROC Documentation/DocBook/kernel-api.xml
Error(/tester/linsrc/linux-2.6.20-git6//drivers/pci/pci.c:1351): cannot understand prototype: 'void __iomem * const * pcim_iomap_table(struct pci_dev *pdev) '
make[1]: *** [Documentation/DocBook/kernel-api.xml] Error 1
make: *** [htmldocs] Error 2

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge /pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (97 commits)
  [SCSI] zfcp: removed wrong comment
  [SCSI] zfcp: use of uninitialized variable
  [SCSI] zfcp: Invalid locking order
  [SCSI] aic79xx: use dma_get_required_mask()
  [SCSI] aic79xx: fix bracket mismatch in unused macro
  [SCSI] BusLogic: Replace 'boolean' by 'bool'
  [SCSI] advansys: clean up warnings
  [SCSI] 53c7xx: brackets fix in uncompiled code
  [SCSI] nsp_cs: remove old scsi code
  [SCSI] aic79xx: make ahd_match_scb() static
  [SCSI] DAC960: kmalloc->kzalloc/Casting cleanups
  [SCSI] scsi_kmap_atomic_sg(): check that local irqs are disabled
  [SCSI] Buslogic: local_irq_disable() is redundant after local_irq_save()
  [SCSI] aic94xx: update for v28 firmware
  [SCSI] scsi_error: Fix lost EH commands
  [SCSI] aic94xx: Add default bus reset handler
  [SCSI] aic94xx: Remove TMF result code munging
  [SCSI] libsas: Add an LU reset mechanism to the error handler
  [SCSI] libsas: Don't BUG when connecting two expanders via wide port
  [SCSI] st: fix Tape dies if wrong block size used, bug 7919
  ...

Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] signal: do not inline handle_signal()
  [MIPS] signal: do not use save_static_function() anymore
  [MIPS] signal32: no need to save c0_status register in setup_sigcontext32()
  [MIPS] signal32: reduce {setup,restore}_sigcontext32 sizes
  [MIPS] signal: factorize debug code
  [MIPS] signal: test return value of install_sigtramp()
  [MIPS] signal32: remove duplicate code
  [MIPS] signal: clean up sigframe structure
  [MIPS] signal: do not inline functions in signal-common.h
  [MIPS] signals: reduce {setup,restore}_sigcontext sizes
  [MIPS] Fix warning in get_user when fetching pointer object from userspace.
  [MIPS] Fix eth2 platform device id for jaguar_atx and ocelot_3 platforms
  [MIPS] JMR3927 and RBTX49x7 support little endian
  [MIPS] RBTX49x7: declare prom_getcmdline()
  [MIPS] RTLX: Sprinkle device model code into code to make udev happier.
  [MIPS] VPE: Sprinkle device model code into code to make udev happier.

Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  tifm_sd: treat "status error" as normal command completion
  mmc: wbsd: Remove stray kunmap_atomic()
  mmc: sdhci: Stop asking for mail
  mmc: sdhci: Remove driver version
  mmc: wbsd: Remove driver version

Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (45 commits)
  [IPV4]: Restore multipath routing after rt_next changes.
  [XFRM] IPV6: Fix outbound RO transformation which is broken by IPsec tunnel patch.
  [NET]: Reorder fields of struct dst_entry
  [DECNET]: Convert decnet route to use the new dst_entry 'next' pointer
  [IPV6]: Convert ipv6 route to use the new dst_entry 'next' pointer
  [IPV4]: Convert ipv4 route to use the new dst_entry 'next' pointer
  [NET]: Introduce union in struct dst_entry to hold 'next' pointer
  [DECNET]: fix misannotation of linkinfo_dn
  [DECNET]: FRA_{DST,SRC} are le16 for decnet
  [UDP]: UDP can use sk_hash to speedup lookups
  [NET]: Fix whitespace errors.
  [NET] XFRM: Fix whitespace errors.
  [NET] X25: Fix whitespace errors.
  [NET] WANROUTER: Fix whitespace errors.
  [NET] UNIX: Fix whitespace errors.
  [NET] TIPC: Fix whitespace errors.
  [NET] SUNRPC: Fix whitespace errors.
  [NET] SCTP: Fix whitespace errors.
  [NET] SCHED: Fix whitespace errors.
  [NET] RXRPC: Fix whitespace errors.
  ...