staging:vt6655:rf: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:rc4: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:power: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:michael: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:mib: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:mac: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:key: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:iwctl: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:iowpa: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:ioctl: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:iocmd: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:hostap: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:dpc: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:device_main: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:device_cfg: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:device: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:desc: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:datarate: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:country: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:channel: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:card: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:bssdb: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:baseband: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:aes_ccmp: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:IEEE11h: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:80211mgr: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6655:80211hdr: Whitespace cleanups

Neatening only.
git diff -w shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 3.9-rc3 into staging-next

This resolves the merge error due to removing the ccg staging driver,
and picks up the other staging driver fixes that went into 3.9-rc3.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.9-rc3

perf,x86: fix link failure for non-Intel configs

Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") introduces a link failure since
perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL:

arch/x86/power/built-in.o: In function `restore_processor_state':
(.text+0x45c): undefined reference to `perf_restore_debug_store'

Fix it by defining the dummy function appropriately.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

perf,x86: fix wrmsr_on_cpu() warning on suspend/resume

Commit 1d9d8639c063 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") fixed a crash when doing PEBS performance profiling
after resuming, but in using init_debug_store_on_cpu() to restore the
DS_AREA mtrr it also resulted in a new WARN_ON() triggering.

init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU
cross-calls to do the MSR update.  Which is not really valid at the
early resume stage, and the warning is quite reasonable.  Now, it all
happens to _work_, for the simple reason that smp_call_function_single()
ends up just doing the call directly on the CPU when the CPU number
matches, but we really should just do the wrmsr() directly instead.

This duplicates the wrmsr() logic, but hopefully we can just remove the
wrmsr_on_cpu() version eventually.

Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
 "Eric's rcu barrier patch fixes a long standing problem with our
  unmount code hanging on to devices in workqueue helpers.  Liu Bo
  nailed down a difficult assertion for in-memory extent mappings."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix warning of free_extent_map
  Btrfs: fix warning when creating snapshots
  Btrfs: return as soon as possible when edquot happens
  Btrfs: return EIO if we have extent tree corruption
  btrfs: use rcu_barrier() to wait for bdev puts at unmount
  Btrfs: remove btrfs_try_spin_lock
  Btrfs: get better concurrency for snapshot-aware defrag work

Btrfs: fix warning of free_extent_map

Users report that an extent map's list is still linked when it's actually
going to be freed from cache.

The story is that

a) when we're going to drop an extent map and may split this large one into
smaller ems, and if this large one is flagged as EXTENT_FLAG_LOGGING which means
that it's on the list to be logged, then the smaller ems split from it will also
be flagged as EXTENT_FLAG_LOGGING, and this is _not_ expected.

b) we'll keep ems from unlinking the list and freeing when they are flagged with
EXTENT_FLAG_LOGGING, because the log code holds one reference.

The end result is the warning, but the truth is that we set the flag
EXTENT_FLAG_LOGGING only during fsync.

So clear flag EXTENT_FLAG_LOGGING for extent maps split from a large one.

Reported-by: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Merge branch 'kbuild' of git://git./linux/kernel/git/mmarek/kbuild

Pull kbuild fix from Michal Marek:
 "One fix for for make headers_install/headers_check to not require make
  3.81.  The requirement has been accidentally introduced in 3.7."

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: fix make headers_check with make 3.80

Merge tag 'for-3.9-rc3' of git://openrisc.net/jonas/linux

Pull OpenRISC bug fixes from Jonas Bonn:

 - The GPIO descriptor work has exposed how broken the non-GPIOLIB bits
   for OpenRISC were.  We now require GPIOLIB as this is the preferred
   way forward.

 - The system.h split introduced a bug in llist.h for arches using
   asm-generic/cmpxchg.h directly, which is currently only OpenRISC.
   The patch here moves two defines from asm-generic/atomic.h to
   asm-generic/cmpxchg.h to make things work as they should.

 - The VIRT_TO_BUS selector was added for OpenRISC, but OpenRISC does
   not have the virt_to_bus methods, so there's a patch to remove it
   again.

* tag 'for-3.9-rc3' of git://openrisc.net/jonas/linux:
  openrisc: remove HAVE_VIRT_TO_BUS
  asm-generic: move cmpxchg*_local defs to cmpxchg.h
  openrisc: require gpiolib

Merge tag 'char-misc-3.9-rc2' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc fixes from Greg Kroah-Hartman:
 "Here are some tiny fixes for the w1 drivers and the final removal
  patch for getting rid of CONFIG_EXPERIMENTAL (all users of it are now
  gone from your tree, this just drops the Kconfig item itself.)

  All have been in the linux-next tree for a while"

* tag 'char-misc-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  final removal of CONFIG_EXPERIMENTAL
  w1: fix oops when w1_search is called from netlink connector
  w1-gpio: fix unused variable warning
  w1-gpio: remove erroneous __exit and __exit_p()
  ARM: w1-gpio: fix erroneous gpio requests

Merge tag 'sound-3.9' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes, as expected for the middle rc:
   - A couple of fixes for potential NULL dereferences and out-of-range
     array accesses revealed by static code parsers
   - A fix for the wrong error handling detected by trinity
   - A regression fix for missing audio on some MacBooks
   - CA0132 DSP loader fixes
   - Fix for EAPD control of IDT codecs on machines w/o speaker
   - Fix a regression in the HD-audio widget list parser code
   - Workaround for the NuForce UDH-100 USB audio"

* tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecs
  sound: sequencer: cap array index in seq_chn_common_event()
  ALSA: hda/ca0132 - Remove extra setting of dsp_state.
  ALSA: hda/ca0132 - Check download state of DSP.
  ALSA: hda/ca0132 - Check if dspload_image succeeded.
  ALSA: hda - Disable IDT eapd_switch if there are no internal speakers
  ALSA: hda - Fix snd_hda_get_num_raw_conns() to return a correct value
  ALSA: usb-audio: add a workaround for the NuForce UDH-100
  ALSA: asihpi - fix potential NULL pointer dereference
  ALSA: seq: Fix missing error handling in snd_seq_timer_open()

Merge branch 'fixes-for-3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping

Pull DMA-mapping fix from Marek Szyprowski:
 "An important fix for all ARM architectures which use ZONE_DMA.
  Without it dma_alloc_* calls with GFP_ATOMIC flag might have allocated
  buffers outsize DMA zone."

* 'fixes-for-3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: DMA-mapping: add missing GFP_DMA flag for atomic buffer allocation

Merge tag 'mfd-fixes-3.9-1' of git://git./linux/kernel/git/sameo/mfd-fixes

Pull MFD fixes from Samuel Ortiz:
 "This is the first batch of MFD fixes for 3.9.

  With this one we have:

   - An ab8500 build failure fix.
   - An ab8500 device tree parsing fix.
   - A fix for twl4030_madc remove routine to work properly (when
     built-in).
   - A fix for properly registering palmas interrupt handler.
   - A fix for omap-usb init routine to actually write into the
     hostconfig register.
   - A couple of warning fixes for ab8500-gpadc and tps65912"

* tag 'mfd-fixes-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes:
  mfd: twl4030-madc: Remove __exit_p annotation
  mfd: ab8500: Kill "reg" property from binding
  mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDO
  mfd: wm831x: Don't forward declare enum wm831x_auxadc
  mfd: twl4030-audio: Fix argument type for twl4030_audio_disable_resource()
  mfd: tps65912: Declare and use tps65912_irq_exit()
  mfd: palmas: Provide irq flags through DT/platform data
  mfd: Make AB8500_CORE select POWER_SUPPLY to fix build error
  mfd: omap-usb-host: Actually update hostconfig

Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Bug fixes for pmbus, ltc2978, and lineage-pem drivers

  Added specific maintainer for some hwmon drivers"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (pmbus/ltc2978) Fix temperature reporting
  hwmon: (pmbus) Fix krealloc() misuse in pmbus_add_attribute()
  hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes
  MAINTAINERS: Add maintainer for MAX6697, INA209, and INA2XX drivers

perf,x86: fix kernel crash with PEBS/BTS after suspend/resume

This patch fixes a kernel crash when using precise sampling (PEBS)
after a suspend/resume. Turns out the CPU notifier code is not invoked
on CPU0 (BP). Therefore, the DS_AREA (used by PEBS) is not restored properly
by the kernel and keeps it power-on/resume value of 0 causing any PEBS
measurement to crash when running on CPU0.

The workaround is to add a hook in the actual resume code to restore
the DS Area MSR value. It is invoked for all CPUS. So for all but CPU0,
the DS_AREA will be restored twice but this is harmless.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

staging: comedi: ni_labpc: fix common detach

`labpc_common_detach()` calls `comedi_pci_disable()` unconditionally.
That's okay for PCI devices and harmless for ISA devices (as the
`hw_dev` member will be NULL so `comedi_to_pci_dev()` will return NULL
and `comedi_pci_disable()` checks for that), but it is disastrous for
PCMCIA devices.  Those are managed by the "ni_labpc_cs" module but it
calls this `labpc_common_detach()` and the `hw_dev` member will be
pointing to the `struct device` embedded in a `struct pcmcia_device` in
that case.  That's enough to confuse `comedi_pci_disable()` into
thinking it's a valid PCI device to be disabled.

Use the private board information (`thisboard`) to make sure it is a PCI
device before calling `comedi_pci_disable()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: remove unneeded settings of `dev->iobase`

Some PCI drivers use the "spare" `iobase` member of `struct
comedi_device` as a flag to indicate that the call to
`comedi_pci_enable()` was successful.  This is no longer necessary now
that `comedi_pci_enable()` and `comedi_pci_disable()` use the
`ioenabled` member of `struct comedi_device` themselves to keep track of
what needs to be done.

Remove the unnecessary assignments to the `iobase` member in the
relevant drivers.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: add 'ioenabled' flag to device

Add 1-bit bit-field member `ioenabled` of type `bool` to `struct
comedi_device`.  Use this to keep track of whether a PCI device and its
BARs have been successfully enabled by `comedi_pci_enable()`.  This
avoids overloading the meaning of the `iobase` member which is used by
several drivers to hold the base port I/O address of a board's "main"
registers.  Other drivers using MMIO use `iobase` as a flag to indicate
that the preceding call to `comedi_pci_enable()` was successful.  They
no longer need to do that.

The name `ioenabled` is intended to be PCI-agnostic so it can be used
for similar purposes by non-PCI drivers.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: make 'in_request_module' a bool bit-field

Change the `in_request_module` member of `struct comedi_device` to a
1-bit bit-field of type `bool` and move it into a suitable hole in the
data type to save a few bytes.  Change the assigned values to `true` and
`false`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: make 'dev->attached' a bool bit-field

Change the `attached` member of `struct comedi_device` to a 1-bit
bit-field of type `bool`.  Change assigned values to `true` and `false`
and replace or remove comparison operations with simple boolean tests.

We'll put some extra bit-fields in the gap later to save space.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: support NI PXI-6624

Florent Boudet reports success using a NI PXI-6624 board with a
trivially modified version of the "ni_660x" driver (addition to the PCI
device ID table and comedi board table).  He did this with the
out-of-tree Comedi drivers at www.comedi.org, but it applies equally to
the in-tree "staging" drivers.

He reports the PXI-6624 is basically the same as the PXI-6602, but with
isolated channels and external voltage source.

Add support for NI PXI-6224 to the "ni_660x" driver.

(Maybe the driver should be renamed to "ni_66xx"?)

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Florent Boudet <flboudet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: reformat driver description comment

Convert to preferred block comment style.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci_dio: restore PCI-1753E support

Back in the old days (before "staging") when Comedi only supported
manual configuration of devices, the "adv_pci_dio" driver supported both
PCI-1753 ("pci1753") and PCI-1753E ("pci1753e").  In actual fact,
"pci1753e" is just a PCI-1753 connected by a ribbon cable to a PCI-1753E
expansion card, which is plugged into a PCI slot but is not a PCI device
itself.  Now that the "adv_pci_dio" driver only supports automatic
configuration of devices and the main "comedi" module no longer allows
auto-configuration to be disabled, a PCI-1753 with a PCI-1753E expansion
card is always treated as an unexpanded PCI-1753 ("pci1753") and there
is no way to override it.  (Recently, an undefined macro
`USE_PCI1753E_BOARDINFO` was used to make the driver switch to
supporting "pci1753e" instead of "pci1753", but this is less than
ideal.)

Advantech has their own Linux (non-Comedi) driver for the PCI-1753 which
detects whether the PCI-1753E expansion card is connected to the
PCI-1753 by fiddling with a register at offset 53 from the main
registers base.

Use Advantech's test in our "adv_pci_dio" driver.  If the board appears
to be a PCI-1753 ("pci1753"), check if the expansion card appears to be
present, and if so, treat the device as a PCI-1753 plus PCI-1753E
expansion card ("pci1753e").

Also, get rid of `enum dio_boardid` (`BOARD_...` enum values) which was
added recently and just use the older `TYPE_...` enum values from `enum
hw_cards_id` instead as the mapping is now 1-to-1.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio: fix build error due to missing '; '

Fix a build error due to a missing ';' at the end of a line.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: Geert Uytterhoeven <geert.uytterhoeven@gmail.com>
Cc: Kumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: dwc2: remove a kfree(NULL)

dwc2_hcd_release() calls dwc2_hcd_free() which frees ->core_params
and sets it to NULL.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sep: fix possible memory leak in sep_prepare_input_dma_table()

'lli_array_ptr' etc. are malloced in sep_prepare_input_dma_table() and should
be freed before leaving from the error handling case, otherwise it will cause
memory leak.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: add documentation for omap_bandgap_validate

Document the helper to validate a struct omap_bandgap and a sensor id.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: remove TODO entry for exposed APIs

Not all APIs exposed today are used. However all unused APIs
will be required once the thermal layer allows IRQ based
policies.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: remove TODO entry suggesting regmap usage

It is hard to use regmap because benefit of using regmap cache
may not be applicable as there is a specific sequence to
restore the bandgap context.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: switch mutex to spinlock inside omap-bandgap

Because there is a need to lock inside IRQ handler, this patch
changes the locking mechanism inside the omap-bandgap.[c,h] to
spinlocks. Now this lock is used to protect omap_bandgap struct
during APIs exposed (possibly used in sysfs handling functions)
and inside the ALERT IRQ handler.

Because there are registers shared among the sensors, this lock
is global, not per sensor.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: Add a MAINTAINERS entry for TI bandgap and thermal driver

Add myself as maintainer of the TI bandgap and thermal driver.

CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
CC: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: change Kconfig dependency method

Now arch code has to specify CONFIG_ARCH_HAS_BANDGAP. So, this driver
will be selectable only if the platform reports itself as having a
bandgap device.

Any OMAP variant or any other OMAP version needs to
select ARCH_HAS_BANDGAP
so that the driver will be applicable. A part from that it is
required to device the data structures that maps the registers
and their bitfields. The DT compatible list must also be updated.

CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
CC: Vaibhav Bedia <vaibhav.bedia@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: document omap_bandgap_build function

Document function to build omap_bandgap structure

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: document omap_bandgap_alert_init function

Document function that sets talert handling up.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: document omap_bandgap_tshut_init function

Add documentation for the function to setup TSHUT handling

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: document _omap_bandgap_read_threshold function

Add documentation of the function for reading alert thresholds

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: document _omap_bandgap_write_threshold function

Document function to update alert thresholds.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: document omap_bandgap_update_alert_threshold function

Document function to program alert thresholds

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: document omap_bandgap_force_single_read

Document function to initialize the conversion state machine.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: update omap_bandgap_set_continous_mode documentation

Simple update on function documentation.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: rename enable_continuous_mode

This patch names 'enable_continuous_mode' accordingly to the file
standard naming.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: section of device driver callbacks

Section with platform device callbacks

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: device initialization section

Section of helper functions to initilize the bandgap device

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: refactor APIs handling threshold values

This patch improves the code that handles threshold values
by creating single functions that are usable for tcold and
thot. This way we won't have duplicated functionality just
because it is handling different bitfields. Now
the added functions are reused in several places where
it is needed to update any threshold.

This patch also removes macros that are used only inside
the _validate helper function.

In this patch there is also an addition of an extra function
section for Exposed APIs, used outside the omap-bandgap.c,
but inside the omap-thermal driver.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: update omap_bandgap_unmask_interrupts documentation

Proper document the function to configure the IRQ event masks.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: refactor temp_sensor_unmask_interrupts

This change improves temp_sensor_unmask_interrupts by:
. renaming it to omap_bandgap_unmask_interrupts
. making it a void function, as there is nothing really to report an error.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: threshold manipulation section

Section of functions manipulating thresholds for Alert and Shutdown.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: document omap_bandgap_add_hyst function

Document function to handle hysteresis.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: rename add_hyst to omap_bandgap_add_hyst

This patch improves the add_hyst function by:
. Renaming it to omap_bandgap_add_hyst
. Moving it to the ADC conversion functions section
. Changing its signature to follow the driver standard

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: add documentation for omap_bandgap_mcelsius_to_adc

Document the conversion function.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: move conv table limits out of sensor data

As we have one conv table per bandgap device and not per sensor,
this patch changes the data structures so that the conv table
min and max values are now part of bandgap_data and not sensor_data.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: rewrite omap_bandgap_mcelsius_to_adc on kernel coding style

Follow Documentation/CodingStyle while doing omap_bandgap_mcelsius_to_adc

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: name temp_to_adc_conversion in a better way

Rename temp_to_adc_conversion to omap_bandgap_mcelsius_to_adc. This name,
though longer, describes better the function.

This patch also changes this function signature so the function follows
the style of this file.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: add documentation for omap_bandgap_adc_to_mcelsius

Document the conversion function.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: rewrite omap_bandgap_adc_to_mcelsius on kernel coding style

Follow Documentation/CodingStyle while doing  omap_bandgap_adc_to_mcelsius.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: name adc_to_temp_conversion in a better way

Rename adc_to_temp_conversion to omap_bandgap_adc_to_mcelsius. This name,
though longer, describes better the function.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: ADC section

Section of ADC helpers functions

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: IRQ handler section

Section of IRQ handlers

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: section of basic helpers

Group of simple functions aggregating basic functionality.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: add a section of register manipulation

This is introduces a series of marks inside the code to
better organize functions per group, aggregating their
functionality.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: read status only once inside alert IRQ

There is no need to re-read status register.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: remove duplicated code

There is no need to assign twice the same variable with the very same value.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: update tshut IRQ handler documentation

Documents tshut handler better.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: update documentation for talert irq handler

Document the Talert IRQ handler.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: rename talert handler

Simple rename to cope with file naming pattern.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: add documentation for omap_bandgap_read_temp

Document function which reads temperature register, depending on
bandgap device version.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: add documentation for omap_bandgap_power

Document the helper function to turn a bandgap device on and off.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: make a omap_bandgap_power with only one exit point

Change the way the omap_bandgap_power is written so that it has only
one exit entry (Documentation/CodingStyle).

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: add documentation for register access functions

Document the helper functions that manipulates registers and their
bitfields. All of them work based of the io mapped area.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: introduce RMW_BITS macro

This patch introduce a macro to read, update, write bitfields.
It will be specific to bandgap data structures.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: fix error checking

The omap_bandgap_get_sensor_data() function returns ERR_PTR(),
but it can also return NULL, in case of initilization, so we need to use
IS_ERR_OR_NULL() rather than only IS_ERR().

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: style cleanup on omap-bandgap.c

simple changes on alignments and white spaces

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: update documentation of omap-bandgap.h

This patch updates the existing data structures for omap bandgap,
inside omap-bandgap.h.

TODO: remove unused fields.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omap-thermal: create header for register, bitfields and definitions

In order to have a better code readability and organization, this patch
splits omap-bandgap.h into three headers.
. omap-bandgap.h will contain only the driver related data structures
definitions and macros
. omap4xxx-bandgap.h will contain only defines and bitfields
related to OMAP4 based devices
. omap5xxx-bandgap.h will contain only defines and bitfields
related to OMAP5 based devices

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>