feed/packages.git
9 months agoeza: update to 0.18.6
Jonas Jelonek [Wed, 6 Mar 2024 09:36:01 +0000 (10:36 +0100)]
eza: update to 0.18.6

- Release notes:
https://github.com/eza-community/eza/releases/tag/v0.18.6

- fix typo in description in Makefile

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
9 months agosyslog-ng: update to version 4.6.0
Josef Schlehofer [Tue, 5 Mar 2024 19:24:19 +0000 (20:24 +0100)]
syslog-ng: update to version 4.6.0

1. Bump version config to 4.6
2. Updated to 4.6.0 version
https://github.com/syslog-ng/syslog-ng/releases/tag/syslog-ng-4.6.0
https://github.com/syslog-ng/syslog-ng/releases/tag/syslog-ng-4.5.0

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
9 months agosyslog-ng: conf: fix deprecated stats_freq
Sergey Ponomarev [Sun, 26 Nov 2023 08:50:56 +0000 (10:50 +0200)]
syslog-ng: conf: fix deprecated stats_freq

The deprecated stats_freq() replaced with stats(freq(0)).

Also make comments shorter.
Fix tabs.

Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
9 months agomodemmanager: start a 3gpp network regsistration
Florian Eckert [Wed, 21 Feb 2024 15:41:32 +0000 (16:41 +0100)]
modemmanager: start a 3gpp network regsistration

If a 'plmn' is set in the configuration, a registration attempt should be
established before the simple-connect command. If the plmn is set during
the simple-connect, a network change may occur during the connection setup.

To prevent this, the registration is started before the simple-connect with
a separate mmcli command. So that we can be sure that the modem is already
registered in the correct network before the simple-connect command.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
9 months agomodemmanager: move cleanup and enable to the top
Florian Eckert [Wed, 21 Feb 2024 15:03:07 +0000 (16:03 +0100)]
modemmanager: move cleanup and enable to the top

Before a new connection attempt is made, the previous connection must be
cleaned up before further connection attempts are made. This is now done
by moving the cleanup and enable sequence to the beginning of the
conection setup.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
9 months agontpclient: remove
Paul Donald [Fri, 1 Mar 2024 20:28:43 +0000 (21:28 +0100)]
ntpclient: remove

ntp sources are dead and gone. The most important functionality is now
provided by ntpd.

Signed-off-by: Paul Donald <newtwen@gmail.com>
9 months agomodemmanager: moving the openwrt related files to subdirectories
Florian Eckert [Tue, 5 Mar 2024 11:59:23 +0000 (12:59 +0100)]
modemmanager: moving the openwrt related files to subdirectories

Moving the openwrt related files to subdirectories as they are installed
on the system. This change makes it immediately apparent during development
where the file is to be installed in the running system.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
9 months agoalist: Update to 3.32.0
Tianling Shen [Tue, 5 Mar 2024 05:29:13 +0000 (13:29 +0800)]
alist: Update to 3.32.0

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
9 months agov2ray-core: Update to 5.14.1
Tianling Shen [Tue, 5 Mar 2024 05:28:00 +0000 (13:28 +0800)]
v2ray-core: Update to 5.14.1

Including security fixes, see release note:
https://github.com/v2fly/v2ray-core/releases/tag/v5.14.1

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
9 months agolsd: add new package
Oskari Rauta [Wed, 28 Feb 2024 18:34:11 +0000 (20:34 +0200)]
lsd: add new package

ls deluxe. Substitute for ls command with style.
Popular amongst people who use ohmyzsh and similar
shell stylers.

Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
9 months agoeza: add new package
Oskari Rauta [Wed, 28 Feb 2024 18:32:24 +0000 (20:32 +0200)]
eza: add new package

eza is a substitute for ls command with icons and colors and more.
Common for those who use ohmyzsh or similar shell stylers.

Co-authored-by: Jonas Jelonek <jonas.helonek@proton.me>
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
9 months agoMerge pull request #23571 from stangri/master-https-dns-proxy
Stan Grishin [Mon, 4 Mar 2024 20:58:28 +0000 (13:58 -0700)]
Merge pull request #23571 from stangri/master-https-dns-proxy

https-dns-proxy: update to upstream 2023-11-19

9 months agobanip: update 0.9.4-3
Dirk Brenken [Mon, 4 Mar 2024 20:26:44 +0000 (21:26 +0100)]
banip: update 0.9.4-3

* fix another logical glitch in the logfile monitor

Signed-off-by: Dirk Brenken <dev@brenken.org>
9 months agonatmap: update to 20240303
Ray Wang [Sun, 3 Mar 2024 10:23:39 +0000 (18:23 +0800)]
natmap: update to 20240303

Signed-off-by: Ray Wang <r@hev.cc>
9 months agomt5311: make package importable as lua module
jasle [Tue, 20 Feb 2024 02:01:58 +0000 (03:01 +0100)]
mt5311: make package importable as lua module

Added init.lua to make the program importable by other lua programs.

Signed-off-by: jasle <jasle@riseup.net>
9 months agomt5311: add package
jasle [Sun, 14 Jan 2024 16:38:33 +0000 (17:38 +0100)]
mt5311: add package

mt5311 are utilities for working with Metanoia/Proscend VDSL2 SFP Modems.

Resulting package:
 * mt5311

Signed-off-by: jasle <jasle@riseup.net>
9 months agolua-struct: add package
jasle [Sun, 14 Jan 2024 16:38:14 +0000 (17:38 +0100)]
lua-struct: add package

lua-struct is a implementation of binary packing/unpacking in pure lua.

Resulting-package:
 * lua-struct

Signed-off-by: jasle <jasle@riseup.net>
9 months agobanip: update 0.9.4-2
Dirk Brenken [Sat, 2 Mar 2024 20:25:47 +0000 (21:25 +0100)]
banip: update 0.9.4-2

* fix a long standing problem in the logfile-parser with dropbear and compressed IPv6 addresses

Signed-off-by: Dirk Brenken <dev@brenken.org>
9 months agopython-bcrypt: Update to 4.1.2
Fabian Lipken [Thu, 29 Feb 2024 08:45:35 +0000 (09:45 +0100)]
python-bcrypt: Update to 4.1.2

Signed-off-by: Fabian Lipken <dynasticorpheus@gmail.com>
9 months agov2raya: Update to 2.2.5.1
Tianling Shen [Sat, 2 Mar 2024 15:33:03 +0000 (23:33 +0800)]
v2raya: Update to 2.2.5.1

Hot fix for a frontend failure bug.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
9 months agodnsproxy: Update to 0.65.2
Tianling Shen [Sat, 2 Mar 2024 11:50:51 +0000 (19:50 +0800)]
dnsproxy: Update to 0.65.2

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
9 months agogolang: Update to 1.21.7
Tianling Shen [Mon, 26 Feb 2024 08:25:18 +0000 (16:25 +0800)]
golang: Update to 1.21.7

go1.21.6 (released 2024-01-09) includes fixes to the compiler,
the runtime, and the crypto/tls, maps, and runtime/pprof packages.

go1.21.7 (released 2024-02-06) includes fixes to the compiler,
the go command, the runtime, and the crypto/x509 package.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
9 months agoapfree-wifidog: update to 7.02.1977
Dengfeng Liu [Wed, 28 Feb 2024 05:05:26 +0000 (13:05 +0800)]
apfree-wifidog: update to 7.02.1977

Signed-off-by: Dengfeng Liu <liudf0716@gmail.com>
9 months agoapfree-wifidog: fix some bugs in the wifidogx.init file
Dengfeng Liu [Wed, 28 Feb 2024 04:43:29 +0000 (12:43 +0800)]
apfree-wifidog: fix some bugs in the wifidogx.init file

Signed-off-by: Dengfeng Liu <liudf0716@gmail.com>
9 months agov2raya: Update to 2.2.5
Tianling Shen [Sat, 2 Mar 2024 09:56:04 +0000 (17:56 +0800)]
v2raya: Update to 2.2.5

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
9 months agobanip: release 0.9.4-1
Dirk Brenken [Sat, 2 Mar 2024 08:28:39 +0000 (09:28 +0100)]
banip: release 0.9.4-1

* add support for destination port & protocol limitations for external feeds (see readme for details),
  useful for lan-forward ad- or DoH-blocking, e.g. only tcp ports 80 and 443
* add turris sentinel blocklist feed
* update readme

Signed-off-by: Dirk Brenken <dev@brenken.org>
9 months agohttps-dns-proxy: update to upstream 2023-11-19
Stan Grishin [Sat, 2 Mar 2024 00:13:49 +0000 (00:13 +0000)]
https-dns-proxy: update to upstream 2023-11-19

* update to upstream 2023-11-19
  (changes: https://github.com/aarond10/https_dns_proxy/commit/489c57efd46983e688579974a2ab7aeaa7df8d83)
* bugfix: include resolveip dependency in Makefile
  (fixes https://github.com/openwrt/packages/issues/23567)
* minor update for failed healthcheck logging

Signed-off-by: Stan Grishin <stangri@melmac.ca>
9 months agoacme-common: simplify config example
Sergey Ponomarev [Wed, 28 Feb 2024 20:06:33 +0000 (22:06 +0200)]
acme-common: simplify config example

Make it more practical to easier get an idea

Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
9 months agoacme-acmesh: use validation_method option instead of guessing
Sergey Ponomarev [Wed, 28 Feb 2024 20:13:47 +0000 (22:13 +0200)]
acme-acmesh: use validation_method option instead of guessing

The new validation_method option can be: dns, webroot or standalone.
Previously we guessed the challenge type:
1. if the DNS provider is specified then it's dns
2. if standalone=1
3. fallback to webroot

The logic is preserved and if the validation_method wasn't set explicitly we'll guess it in old manner.

Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
9 months agoacme-common: use validation_method option instead of guessing
Sergey Ponomarev [Wed, 28 Feb 2024 19:59:27 +0000 (21:59 +0200)]
acme-common: use validation_method option instead of guessing

The new validation_method option can be: dns, webroot or standalone.
Previously we guessed the challenge type:
1. if the DNS provider is specified then it's dns
2. if standalone=1
3. fallback to webroot

The logic is preserved and if the validation_method wasn't set explicitly we'll guess it in old manner.

Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
9 months agolibpqxx: update to version 7.9.0
Igor Bezzubchenko [Thu, 29 Feb 2024 13:03:01 +0000 (14:03 +0100)]
libpqxx: update to version 7.9.0

Signed-off-by: Igor Bezzubchenko <garikello@gmail.com>
9 months agotravelmate: update 2.1.2-5
Dirk Brenken [Thu, 29 Feb 2024 20:00:21 +0000 (21:00 +0100)]
travelmate: update 2.1.2-5

* final vpn tweaks

Signed-off-by: Dirk Brenken <dev@brenken.org>
9 months agosing-box: update to 1.8.7
brvphoenix [Wed, 28 Feb 2024 13:32:53 +0000 (21:32 +0800)]
sing-box: update to 1.8.7

Signed-off-by: brvphoenix <brvphoenix@gmail.com>
9 months agoadblock: update 4.1.5-9
Dirk Brenken [Wed, 28 Feb 2024 20:11:48 +0000 (21:11 +0100)]
adblock: update 4.1.5-9

* minimal fix with reporting interface 'any'

Signed-off-by: Dirk Brenken <dev@brenken.org>
9 months agoMerge pull request #23549 from krant/inotify
Florian Eckert [Wed, 28 Feb 2024 12:33:25 +0000 (13:33 +0100)]
Merge pull request #23549 from krant/inotify

inotify-tools: fix link error on x86

9 months agoinotify-tools: fix link error on x86
krant [Wed, 28 Feb 2024 11:50:10 +0000 (13:50 +0200)]
inotify-tools: fix link error on x86

Previous commit removed unnecessary linking with libstdc++
but introduced another error on x86 platforms:

  undefined reference to `__stack_chk_fail_local'

Fix it by explicitly linking libssp_nonshared.a

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
9 months agoMerge pull request #23543 from krant/openthread-br
Stijn Tintel [Tue, 27 Feb 2024 21:53:53 +0000 (23:53 +0200)]
Merge pull request #23543 from krant/openthread-br

openthread-br: fix build and modernize

9 months agoopenthread-br: modernize CMake options
krant [Tue, 27 Feb 2024 08:15:07 +0000 (10:15 +0200)]
openthread-br: modernize CMake options

- ':BOOL' suffix is not needed
- Don't set options which are matching the defaults
- Rename non-existing OT_BORDER_ROUTING_NAT64 to OTBR_NAT64

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
9 months agoopenthread-br: remove superseded patch
krant [Tue, 27 Feb 2024 08:07:09 +0000 (10:07 +0200)]
openthread-br: remove superseded patch

The patch is not needed since it is implemented in
https://github.com/openthread/ot-br-posix/pull/1908
and included into the current version.

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
9 months agoopenthread-br: fix build error on some platforms
krant [Tue, 27 Feb 2024 10:31:02 +0000 (12:31 +0200)]
openthread-br: fix build error on some platforms

On some builders the package was failing to build:
```
cp: cannot overwrite non-directory '[..]/var' with directory '[..]/var
```

Here we're moving the creation of /var/lib/thread into runtime script,
which eliminates the error.

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
9 months agorclone: add fuse3-utils as dependency
Tianling Shen [Tue, 27 Feb 2024 16:39:15 +0000 (00:39 +0800)]
rclone: add fuse3-utils as dependency

rclone has switched to use fuse3 since v1.62.0.

Reported-by: qiuzi <gxfclql@gmail.com>
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
9 months agologrotate: update to 3.21.0
krant [Tue, 27 Feb 2024 09:53:19 +0000 (11:53 +0200)]
logrotate: update to 3.21.0

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
9 months agodnsdist: disable XSK to fix the build
krant [Mon, 26 Feb 2024 11:12:21 +0000 (13:12 +0200)]
dnsdist: disable XSK to fix the build

XSK support is set to auto by default and on some hosts it is detected as
on and leads to:

```
In file included from dnsdist-backend.cc:32:
xsk.hh:28:10: fatal error: bits/types/struct_timespec.h: No such file or
directory
   28 | #include <bits/types/struct_timespec.h>
```

Here we disable XSK so configure will behave more deterministically and
hopefully fix the builders.

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
9 months agomc: depend on libe2p
Oskari Rauta [Mon, 26 Feb 2024 23:03:49 +0000 (01:03 +0200)]
mc: depend on libe2p

Now that libe2p is separated from e2fsprogs;
midnight commander needs it added to depends.

Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
9 months agoMerge pull request #23542 from mhei/use-https-for-php-and-pecl
Michael Heimpold [Tue, 27 Feb 2024 06:24:00 +0000 (07:24 +0100)]
Merge pull request #23542 from mhei/use-https-for-php-and-pecl

php8/pecl8-pecl-*: use https URLs for PKG_SOURCE_URLs

9 months agohttping: update to 3.5
krant [Sun, 25 Feb 2024 09:09:05 +0000 (11:09 +0200)]
httping: update to 3.5

- Update package URLs
- Use local tarball for sources
- Switch to CMake
- Drop obsolete patches including 'minimize' (ipk size +3KB only)
- Add 3 new patches to fix musl, openssl and cmake issues

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
9 months agodump1090: fix soft float ARM build
krant [Mon, 26 Feb 2024 12:57:50 +0000 (14:57 +0200)]
dump1090: fix soft float ARM build

Package CPU features detection is not supporting soft float ARM.
So we disable it altogether.

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
9 months agophp8/pecl8-pecl-*: use https URLs for PKG_SOURCE_URLs
Michael Heimpold [Tue, 20 Feb 2024 16:38:25 +0000 (17:38 +0100)]
php8/pecl8-pecl-*: use https URLs for PKG_SOURCE_URLs

Most packages already use https URLs and for PHP and PECL
package downloads https is working properly.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
9 months agoyq: Update to 4.42.1
Tianling Shen [Mon, 26 Feb 2024 08:22:26 +0000 (16:22 +0800)]
yq: Update to 4.42.1

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
9 months agov2fly-geodata: Update to latest version
Tianling Shen [Mon, 26 Feb 2024 08:18:56 +0000 (16:18 +0800)]
v2fly-geodata: Update to latest version

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
9 months agoalist: Update to 3.31.0
Tianling Shen [Mon, 26 Feb 2024 08:21:15 +0000 (16:21 +0800)]
alist: Update to 3.31.0

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
9 months agocloudflared: Update to 2024.2.1
Tianling Shen [Mon, 26 Feb 2024 08:21:09 +0000 (16:21 +0800)]
cloudflared: Update to 2024.2.1

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
9 months agouvol: add support for detecting fitblk boot device
Daniel Golle [Mon, 26 Feb 2024 05:08:04 +0000 (05:08 +0000)]
uvol: add support for detecting fitblk boot device

Auto-detect LVM2 volume on boot device used with fitblk uImage.FIT
sub-image driver.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
9 months agoinotify-tools: update to 4.23.9.0
krant [Sun, 25 Feb 2024 16:14:58 +0000 (18:14 +0200)]
inotify-tools: update to 4.23.9.0

- Workaround superfluous linking with libstdccp

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
9 months agorust: update to 1.76.0
krant [Sat, 24 Feb 2024 16:47:34 +0000 (18:47 +0200)]
rust: update to 1.76.0

- Use .xz for source archive
- Refresh patches

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
9 months agosnort3: build against gperftools-runtime
John Audia [Sun, 25 Feb 2024 00:06:45 +0000 (19:06 -0500)]
snort3: build against gperftools-runtime

Should provide increases in snort3 performance thanks to thread-
caching malloc provided by gperftools.  Avg CPU usage is down.
Another user reported higher throughput achieved with snort3
compiled with this on samba transfers on system with CPU-limited
snort3 performance.[1]

1. https://forum.openwrt.org/t/some-help-with-a-makefile-gperftools/165656/22

Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne

Signed-off-by: John Audia <therealgraysky@proton.me>
9 months agortpmidi: update to 23.12
Rosen Penev [Sat, 24 Feb 2024 20:24:22 +0000 (12:24 -0800)]
rtpmidi: update to 23.12

Get rid of codeload and use local tarballs.

Fixes compilation with newer fmt.

Minor cleanups.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
9 months agotmux: update to 3.4
Maxim Storchak [Sat, 24 Feb 2024 22:32:21 +0000 (00:32 +0200)]
tmux: update to 3.4

Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
9 months agotravelmate: update 2.1.2-4
Dirk Brenken [Sat, 24 Feb 2024 21:39:10 +0000 (22:39 +0100)]
travelmate: update 2.1.2-4

* more re-connections tweaks
* made travelmate generated emails responsive

Signed-off-by: Dirk Brenken <dev@brenken.org>
9 months agopython-yaml: fix build with Cython 3
krant [Tue, 20 Feb 2024 11:49:43 +0000 (13:49 +0200)]
python-yaml: fix build with Cython 3

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
9 months agosnort3: update to 3.1.81.0
John Audia [Tue, 20 Feb 2024 20:36:26 +0000 (15:36 -0500)]
snort3: update to 3.1.81.0

Changelog: https://github.com/snort3/snort3/releases/tag/3.1.81.0

   ,,_     -*> Snort++ <*-
  o"  )~   Version 3.1.81.0
   ''''    By Martin Roesch & The Snort Team
           http://snort.org/contact#team
           Copyright (C) 2014-2024 Cisco and/or its affiliates. All rights reserved.
           Copyright (C) 1998-2013 Sourcefire, Inc., et al.
           Using DAQ version 3.0.14
           Using LuaJIT version 2.1.0-beta3
           Using OpenSSL 3.0.13 30 Jan 2024
           Using libpcap version 1.10.4 (with TPACKET_V3)
           Using PCRE version 8.45 2021-06-15
           Using ZLIB version 1.3.1
           Using Hyperscan version 5.4.2 2024-02-16
           Using LZMA version 5.4.6

Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne

Signed-off-by: John Audia <therealgraysky@proton.me>
9 months agoconserver: free correct addrinfo to prevent crash.
Darren Tucker [Thu, 15 Feb 2024 08:33:05 +0000 (19:33 +1100)]
conserver: free correct addrinfo to prevent crash.

When looping through addrinfo lists in AddrsMatch, keep a copy of the
original addrinfo pointers to free instead of ending up at the terminating
NULLs and trying to free those.

OpenWRT uses musl in which freeaddrinfo(NULL) is not safe (which is
fine, it's not required by the spec) so this fixes a segfault.

Signed-off-by: Darren Tucker <dtucker@dtucker.net>
9 months agohtpdate: update to 1.3.7
krant [Sat, 24 Feb 2024 11:02:57 +0000 (13:02 +0200)]
htpdate: update to 1.3.7

- Switch package URLs to HTTPS
- Use .gz for source archive since .xz is no longer available
- Remove upstreamed patches

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
9 months agofwknop: update to 2.6.11
Oldřich Jedlička [Fri, 23 Feb 2024 22:35:37 +0000 (23:35 +0100)]
fwknop: update to 2.6.11

Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
9 months agodump1090: update to 9.0
krant [Sat, 24 Feb 2024 10:34:11 +0000 (12:34 +0200)]
dump1090: update to 9.0

- Fix version to be properly configured

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
9 months agoc-ares: update to 1.27.0
krant [Fri, 23 Feb 2024 20:19:37 +0000 (22:19 +0200)]
c-ares: update to 1.27.0

- Update package URL
- Don't set default CMake options

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
9 months agoavrdude: fix dependencies
krant [Fri, 23 Feb 2024 09:19:45 +0000 (11:19 +0200)]
avrdude: fix dependencies

- libftdi, libhidapi, libusb-0.1 was incorrectly leaking into the build.
- libgpiod was incorrectly missing out despite LINUXGPIO feature
  was explicitly requested.

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
9 months agogperftools: add new package
John Audia [Thu, 13 Jul 2023 14:20:48 +0000 (10:20 -0400)]
gperftools: add new package

Thread-caching malloc provided by this package improves snort3
performance.  I have been running with this for over seven months
without issues.  Avg CPU usage is down.  Another user reported
higher throughput achieved with snort3 compiled with this on
samba transfers on system with CPU-limited snort performance.[1]

1. https://forum.openwrt.org/t/some-help-with-a-makefile-gperftools/165656/22

Build system: x86/64
Build-tested: x86/64
Run-tested: x86/64

Signed-off-by: John Audia <therealgraysky@proton.me>
9 months agotravelmate: update 2.1.2-3
Dirk Brenken [Sat, 24 Feb 2024 05:58:40 +0000 (06:58 +0100)]
travelmate: update 2.1.2-3

* various vpn optimizations
* remove obsololete trm_maxscan option
* small fixes for net status and captive portal handling
* add an additional login variant to the h-hotels login script
* fix the wifibahn login script work again with wifionice hotspots again
* update readme

Signed-off-by: Dirk Brenken <dev@brenken.org>
10 months agolighttpd: update to lighttpd 1.4.74 release hash
Glenn Strauss [Thu, 22 Feb 2024 18:03:24 +0000 (13:03 -0500)]
lighttpd: update to lighttpd 1.4.74 release hash

Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
10 months agosysstat: add missing xz-utils dependency
krant [Fri, 23 Feb 2024 01:30:19 +0000 (03:30 +0200)]
sysstat: add missing xz-utils dependency

Depending only on 'xz' hides the package when 'xz-utils' is not selected

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
10 months agoimagemagick: add missing libzip dependency
Alexander Egorenkov [Sat, 17 Feb 2024 10:02:08 +0000 (11:02 +0100)]
imagemagick: add missing libzip dependency

Package imagemagick is missing dependencies for the following libraries:
libzip.so.5.

Fixes: 7b697342e9fc ("imagemagick: update to 7.1.1-28")
Signed-off-by: Alexander Egorenkov <egorenar-dev@posteo.net>
10 months agotesseract: update to 5.3.4
krant [Wed, 21 Feb 2024 11:03:11 +0000 (13:03 +0200)]
tesseract: update to 5.3.4

- Fix NEON mis-detection which was breaking builds on some platforms

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
10 months agomicropython: disable mold
Oskari Rauta [Fri, 16 Feb 2024 08:44:11 +0000 (10:44 +0200)]
micropython: disable mold

package fails to build with mold linker due to unregocnized flag.

Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
10 months agoopenvpn: update to 2.6.9
Ivan Pavlov [Mon, 12 Feb 2024 19:23:24 +0000 (22:23 +0300)]
openvpn: update to 2.6.9

- license change is now complete, and all code has been re-licensed
  under the new license (still GPLv2, but with new linking exception
  for Apache2 licensed code).
  Code that could not be re-licensed has been removed or rewritten.

- add support for building with mbedTLS 3.x.x

- new option "--force-tls-key-material-export" to only accept clients
  that can do TLS keying material export to generate session keys
  (mostly an internal option to better deal with TLS 1.0 PRF failures).

- Windows: bump vcpkg-ports/pkcs11-helper to 1.30

- Log incoming SSL alerts in easier to understand form and move logging
  from "--verb 8" to "--verb 3".

- protocol_dump(): add support for printing "--tls-crypt" packets

and other fixes

For details refer to https://github.com/OpenVPN/openvpn/blob/v2.6.9/Changes.rst

Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
10 months agohyperscan: symlinks redundant ABI shared objects
John Audia [Thu, 22 Feb 2024 20:21:46 +0000 (15:21 -0500)]
hyperscan: symlinks redundant ABI shared objects

Use $(CP) macro rather than $(INSTALL_DATA) to preserve symlinks
on shared objects which saves approx 11.8 M of space.

From hyperscan-runtime_5.4.2-1:

% ls -lh /usr/lib/libhs*
-rw-r--r-- 1 root root 4.7M Feb 16 14:29 /usr/lib/libhs.so
-rw-r--r-- 1 root root 4.7M Feb 16 14:29 /usr/lib/libhs.so.5
-rw-r--r-- 1 root root 4.7M Feb 16 14:29 /usr/lib/libhs.so.5.4.2
-rw-r--r-- 1 root root 1.2M Feb 16 14:29 /usr/lib/libhs_runtime.so
-rw-r--r-- 1 root root 1.2M Feb 16 14:29 /usr/lib/libhs_runtime.so.5
-rw-r--r-- 1 root root 1.2M Feb 16 14:29 /usr/lib/libhs_runtime.so.5.4.2

% grep Installed-Size /usr/lib/opkg/info/hyperscan-runtime.control
Installed-Size: 18370560

From hyperscan-runetime_5.4.2-2 (created by this PR):

% ls -lh /usr/lib/libhs*
lrwxr-xr-x 1 root root   10 Feb 22 15:56 /usr/lib/libhs.so -> libhs.so.5
lrwxr-xr-x 1 root root   14 Feb 22 15:56 /usr/lib/libhs.so.5 -> libhs.so.5.4.2
-rwxr-xr-x 1 root root 4.6M Feb 22 15:27 /usr/lib/libhs.so.5.4.2
lrwxr-xr-x 1 root root   18 Feb 22 15:56 /usr/lib/libhs_runtime.so -> libhs_runtime.so.5
lrwxr-xr-x 1 root root   22 Feb 22 15:56 /usr/lib/libhs_runtime.so.5 -> libhs_runtime.so.5.4.2
-rwxr-xr-x 1 root root 1.2M Feb 22 15:27 /usr/lib/libhs_runtime.so.5.4.2

% grep Installed-Size /usr/lib/opkg/info/hyperscan-runtime.control
Installed-Size: 5918720

Credit to @efahl for pointing this out.

Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne

Signed-off-by: John Audia <therealgraysky@proton.me>
10 months agoscreen: update to 4.9.1
krant [Sun, 11 Feb 2024 23:23:25 +0000 (01:23 +0200)]
screen: update to 4.9.1

- Remove upstreamed patch

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
10 months agocoova-chilli: fix libxt-coova not loading properly from iptables ( openwrt/packages...
Pierre Parent [Wed, 14 Feb 2024 10:51:59 +0000 (11:51 +0100)]
coova-chilli: fix libxt-coova not loading properly from iptables ( openwrt/packages#23092 )

Signed-off-by: Pierre Parent <m@pierre-parent.fr>
10 months agortl_433: update to 23.11
Edmunt Pienkowsky [Sat, 17 Feb 2024 09:03:02 +0000 (10:03 +0100)]
rtl_433: update to 23.11

Signed-off-by: Edmunt Pienkowsky <roed@onet.eu>
10 months agortl-sdr: update to v2.0.1
Edmunt Pienkowsky [Sat, 17 Feb 2024 08:57:08 +0000 (09:57 +0100)]
rtl-sdr: update to v2.0.1

Signed-off-by: Edmunt Pienkowsky <roed@onet.eu>
10 months agoclamav: update to 1.3.0
krant [Thu, 22 Feb 2024 10:53:47 +0000 (12:53 +0200)]
clamav: update to 1.3.0

- Add build-time Rust dependency
- Don't set default and rename changed CMake options

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
10 months agocroc: update to 9.6.12
Jonas Jelonek [Thu, 22 Feb 2024 19:03:43 +0000 (20:03 +0100)]
croc: update to 9.6.12

changelogs:
9.6.10: https://github.com/schollz/croc/releases/tag/v9.6.10
9.6.11: https://github.com/schollz/croc/releases/tag/v9.6.10
9.6.12: https://github.com/schollz/croc/releases/tag/v9.6.10

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
10 months agofswebcam: update to 20200725
krant [Thu, 22 Feb 2024 21:05:06 +0000 (23:05 +0200)]
fswebcam: update to 20200725

- Remove dead mirror

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
10 months agogit: update to 2.43.2
krant [Thu, 22 Feb 2024 20:54:29 +0000 (22:54 +0200)]
git: update to 2.43.2

- Refresh a patch

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
10 months agoboinc: update to 7.24.3
krant [Thu, 22 Feb 2024 19:03:05 +0000 (21:03 +0200)]
boinc: update to 7.24.3

- Use local tarball
- Remove upstreamed and refresh remaining patches

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
10 months agoavrdude: update to 7.3
krant [Thu, 22 Feb 2024 07:36:14 +0000 (09:36 +0200)]
avrdude: update to 7.3

- Use local tarball
- Use CMake
- Depend from libusb-1.0 instead of libusb-compat
- Remove obsolete patches

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
10 months agoripgrep: update to 14.1.0
krant [Thu, 22 Feb 2024 14:29:06 +0000 (16:29 +0200)]
ripgrep: update to 14.1.0

- Link pcre2 dynamically
  - it was linked statically and libpcre2 dependency was useless
  - it magically fixes build error when global LTO is enabled
  - it reduces resulting binary size
- Use 'release-lto' cargo profile to further reduce binary size

'rg' binary sizes comparision (arm_cortex-a9+neon):
- 4293KB: unmodified
- 4018KB: dynamic libpcre2
- 3521KB: dynamic libpcre2 + release-lto

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
10 months agobluez: update to 5.72
krant [Thu, 22 Feb 2024 06:32:26 +0000 (08:32 +0200)]
bluez: update to 5.72

- Use HTTPS for URL
- Don't set default configure option
- Refresh the patches

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
10 months agoglib2: use internal pcre2 for host
Rosen Penev [Wed, 21 Feb 2024 20:52:11 +0000 (12:52 -0800)]
glib2: use internal pcre2 for host

There's some weird issue where -lpcre2 is not being passed. Fixes
vala/host which links to static libraries.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
10 months agolibiio: fix pkgconfig paths
Rosen Penev [Wed, 21 Feb 2024 20:48:28 +0000 (12:48 -0800)]
libiio: fix pkgconfig paths

CMake build is passing host paths in pkgconfig file.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
10 months agonghttp3: fix pkgconfig file
Rosen Penev [Wed, 21 Feb 2024 20:46:46 +0000 (12:46 -0800)]
nghttp3: fix pkgconfig file

CMake build is passing host paths in pkgconfig.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
10 months agosysstat: update to 12.7.5
krant [Wed, 21 Feb 2024 15:27:04 +0000 (17:27 +0200)]
sysstat: update to 12.7.5

- Update package URLs
- Add missing xz dependency
- Fix incorrectly set sa_dir
- Refresh the patch

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
10 months agonlbwmon: update to Git HEAD (2024-02-21)
Jo-Philipp Wich [Wed, 21 Feb 2024 20:50:42 +0000 (21:50 +0100)]
nlbwmon: update to Git HEAD (2024-02-21)

8dab2ae24c54 neigh: fix potential integer underflow in avl_cmp_neigh()
992f9078b1d5 nfnetlink: fix netlink dump receive logic
ec1a39e53d3f nfnetlink: improve message reception in event callback
0ef61c3bebcb build: convert CMakeList.txt to lowercase
c7616bcfaaef nlbwmon: utilize uloop interval timer if available

Fixes: https://github.com/jow-/nlbwmon/issues/57
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
10 months agolibffi: update to 3.4.6
krant [Wed, 21 Feb 2024 12:15:00 +0000 (14:15 +0200)]
libffi: update to 3.4.6

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
10 months agolibpng: update to 1.6.42
krant [Wed, 21 Feb 2024 10:54:53 +0000 (12:54 +0200)]
libpng: update to 1.6.42

- Don't set default and rename renamed CMake options
- Enable NEON optimizations
- Rebase the patch

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
10 months agoovn: bump to 22.03.5
Yousong Zhou [Wed, 21 Feb 2024 08:41:19 +0000 (08:41 +0000)]
ovn: bump to 22.03.5

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
10 months agoopenvswitch: bump to 2.17.9
Yousong Zhou [Mon, 5 Feb 2024 03:14:38 +0000 (03:14 +0000)]
openvswitch: bump to 2.17.9

Refresh and backport patches so that

 - ./python path in the source code takes precedence over the same dir in hostpkg
 - OVN LTS version 22.03.5 which depends on Open vSwitch 3.0 can compile
   with Open vSwitch 2.17

Fixes: https://github.com/openwrt/packages/issues/22744
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
10 months agolibcurl-gnutls: fix build
krant [Wed, 21 Feb 2024 07:34:19 +0000 (09:34 +0200)]
libcurl-gnutls: fix build

- Missing --without-nghttp3 was leaking host includes and breaking the build
- Remove or rename deprecated configure options
- Add --disable-libcurl-option to reduce package size
- Use .xz instead of .bz2 for PKG_SOURCE

Signed-off-by: krant <aleksey.vasilenko@gmail.com>
10 months agortty: update to 8.1.1
Jianhui Zhao [Tue, 20 Feb 2024 14:13:31 +0000 (22:13 +0800)]
rtty: update to 8.1.1

Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
10 months agodockerd: Update to 25.0.3
Gerard Ryan [Sun, 31 Dec 2023 06:15:27 +0000 (16:15 +1000)]
dockerd: Update to 25.0.3

Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>