git.openwrt.org Git - openwrt/staging/blogic.git/log

perf machine: Adopt findnew_kernel method

It never was a 'struct dso' method, so fix that by rename
dso__kernel_findnew() to machine__findnew_kernel().

At some point I'll move it all to the machine.[ch] files, for now
lets ease patch review by not moving too much stuff.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zrxmblgsg5vx0iv4rhvq2f6l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Remove getpgrp from mmap-basic

mmap-basic fails on arm64.

4: read samples using the mmap interface: read samples using the mmap interface: FAILED!

This is because arm64 doesn't come with getpgrp() syscall. The syscall
is a BSD compatibility wrapper, Archs that don't define
__ARCH_WANT_SYS_GETPGRP do not have this. Remove it, since getpgid is
already used in the testcase.

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429192375-13706-4-git-send-email-riku.voipio@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Aename open*.c to openat*.c

Since the test being tested is now openat rather than open, rename the
files to make it explicit. The patch is separeted from the first to make
it simpler to deal with any potential conflicts in the Makefile

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429192375-13706-3-git-send-email-riku.voipio@linaro.org
[ Fixed it up wrt Build files ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Switch from open to openat

Multiple perf tests fail on arm64 due to missing open syscall:

2: detect open syscall event : FAILED!

open(2) is a legacy syscall, replaced with openat(2) since 2.6.16. Thus
new architectures in kernel, such as arm64, don't implement these legacy
syscalls.

The patch replaces all sys_enter_open events with sys_enter_openat,
renames the related tests and test output to avoid confusion.

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429192375-13706-2-git-send-email-riku.voipio@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add ARM64 perf_regs_load to support libunwind and enable testing

Newest libunwind does support ARM64, and perf is able to utilize it
also.

This patch enables the perf test dwarf unwind for arm64.

Test result:
# ./perf test unwind
25: Test dwarf unwind : Ok

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1427461681-72971-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf kmem: Fix compiler warning about may be accessing uninitialized variable

The last argument to strtok_r doesn't need to be initialized, its just a
placeholder to make this routine reentrant, but gcc doesn't know about
that and complains, breaking the build, fix it by setting it to NULL.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-8e8rgbg3aom9uarsyqjrsctg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf db-export: Fix thread ref-counting

Thread ref-counting was not done for get_main_thread() meaning that
there was a thread__get() from machine__find_thread() that was not being
paired with thread__put(). Fix that.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1432906425-9911-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf probe: Fix 'function unused' warning

By 'make build-test' a warning is found in probe-event.c that, after
commit 419e873828 (perf probe: Show the error reason comes from
invalid DSO) the only user of kernel_get_module_dso() is
open_debuginfo(). Which is not compiled if HAVE_DWARF_SUPPORT not set.

'make build-test' found this problem when make_minimal.

This patch moves kernel_get_module_dso() to HAVE_DWARF_SUPPORT ifdef
section.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1432779905-206143-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf annotate: Fix -i option, which is currently ignored.

Assign input_name, received from program arguments, to file data
structure.

Signed-off-by: Martin Liska <mliska@suse.cz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/55685654.2010209@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core refactorings and improvements from Arnaldo Carvalho de Melo:

User visible changes:

  - Add hint for 'Too many events are opened.' error message (Jiri Olsa)

Infrastructure changes:

  - Protect accesses to map rbtrees with a lock and refcount struct map,
    reducing memory usage as maps not used get freed. The 'dso' struct is
    next in line. (Arnaldo Carvalho de Melo)

  - Annotation and branch related option parsing refactorings to
    share code with upcoming patches (Andi Kleen)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf: Remove myself from MAINTAINERS entry

I haven't been working on perf for a while, so remove my name
from the MAINTAINERS entry for it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150528061757.GB27903@iris.ozlabs.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf tools: Move branch option parsing to own file

.. to allow sharing between builtin-record and builtin-top later. No
code changes, just moved code.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1432749114-904-9-git-send-email-andi@firstfloor.org
[ Rename too generic branch.[ch] name to parse-branch-options.[ch] ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf annotation: Add symbol__get_annotation

Add a new utility function to get an function annotation out of existing
code.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1432749114-904-4-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add hint for 'Too many events are opened.' error message

Enhancing the 'Too many events are opened.' error message with hint to
use use 'ulimit -n <limit>' command.

Before:

  $ perf record -e 'sched:*,syscalls:*' ls
  Error:
  Too many events are opened.
  Try again after reducing the number of events.

Now:

  $ perf record -e 'sched:*,syscalls:*' ls
  Error:
  Too many events are opened.
  Probably the maximum number of open file descriptors has been reached.
  Hint: Try again after reducing the number of events.
  Hint: Try increasing the limit with 'ulimit -n <limit>'

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432587114-14924-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Reference count struct map

We have pointers to struct map instances in several places, like in the
hist_entry instances, so we need a way to know when we can destroy them,
otherwise we may either keep leaking them or end up referencing deleted
instances.

Start fixing it by reference counting them.

This patch puts the reference count for struct map in place, replacing
direct map__delete() calls with map__put() ones and then grabbing a
reference count when adding it to the maps struct where maps for a
struct thread are kept.

Next we'll grab reference counts when setting pointers to struct map
instances, in places like in the hist_entry code.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wi19xczk0t2a41r1i2chuio5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Check if a map is still in use when deleting it

I.e. match RB_CLEAR_NODE() with RB_EMPTY_NODE(), to check that it isn't
in a rb tree at the time of its deletion.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vumvhird765id11zbx00d2r8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Protect accesses the map rbtrees with a rw lock

To allow concurrent access, next step: refcount struct map instances, so
that we can ditch maps->removed_maps and stop leaking threads, maps,
then struct DSO needs the same treatment.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-o45w2w5dzrza38nzqxnqzhyf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Introduce struct maps

That for now has the maps rbtree and the list for the dead maps, that
may be still referenced from some hist_entry, etc.

This paves the way for protecting the rbtree with a lock, then refcount
the maps and finally remove the removed_maps list, as it'll not ne
anymore needed.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fl0fa6142pj8khj97fow3uw0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from  Arnaldo Carvalho de Melo:

New features:

  - Add option in 'perf sched' to merge like comms to lat output (Josef Bacik)

  - Improve 'perf probe' error messages when not finding a
    suitable vmlinux (Masami Hiramatsu)

Infrastructure changes:

  - Use atomic.h for various pre-existing reference counts (Arnaldo Carvalho de Melo)

  - Leg work for refcounting 'struct map' (Arnaldo Carvalho de Melo)

  - Assign default value for some pointers (Martin Liška)

  - Improve setting of gcc debug option (Martin Liška)

  - Separate the tests and tools in installation (Nam T. Nguyen)

  - Reduce number of arguments of hist_entry_iter__add() (Namhyung Kim)

  - DSO data cache fixes (Namhyung Kim)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf probe: Fix an error when deleting probes successfully

Fix a bug in del_perf_probe_events() which returns an error (-ENOENT)
even if the probes are successfully deleted.

This happens only if the probes are on user-apps and not on kernel,
simply because it doesn't clear the previous error.

So, without this fix, we get an error even though events are being
successfully removed.

  ------
  # ./perf probe -x ./perf del_perf_probe_events
  Added new event:
    probe_perf:del_perf_probe_events (on del_perf_probe_events in ...

  You can now use it in all perf tools, such as:

          perf record -e probe_perf:del_perf_probe_events -aR sleep 1

  # ./perf probe -d \*:\*
  Removed event: probe_perf:del_perf_probe_events
    Error: Failed to delete events.
  ------

This fixes the above error.
  ------
  # ./perf probe -d \*:\*
  Removed event: probe_perf:del_perf_probe_events
  ------

Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Link: http://lkml.kernel.org/r/20150527083725.23880.45209.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf probe: Show the error reason comes from invalid DSO

Show the reason of error when dso__load* fails. This shows when user
gives wrong kernel image or wrong path.

Without this, perf probe shows an obscure message:

  ----
  $ perf probe -k ~/kbin/linux-3.x86_64/vmlinux -L vfs_read
  Failed to find path of kernel module.
    Error: Failed to show lines.
  ----

With this, perf shows appropriate error message:

  ----
  $ perf probe -k ~/kbin/linux-3.x86_64/vmlinux -L vfs_read
  Failed to find the path for kernel: Mismatching build id
    Error: Failed to show lines.
  ----

And:

  ----
  $ perf probe -k /non-exist/kernel/vmlinux -L vfs_read
  Failed to find the path for kernel: No such file or directory
    Error: Failed to show lines.
  ----

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Link: http://lkml.kernel.org/r/20150527083718.23880.84100.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Disallow PMU events intel_pt and intel_bts until there is support

Disallow PMU events intel_pt and intel_bts until the tools support them.

By default any PMU is selectable as an event but until the tools have
intel_pt and intel_bts support using them would result in no data being
recorded without any indication as to why.

Before the change:

    $ perf record -e intel_bts// sleep 1
    [ perf record: Woken up 1 times to write data ]
    [ perf record: Captured and wrote 0.008 MB perf.data ]
    $ perf report --stdio
    Error:
    The perf.data file has no samples!

After the change:

    $ perf record -e intel_bts// sleep 1
    invalid or unsupported event: 'intel_bts//'
    Run 'perf list' for a list of valid events

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1432295653-13989-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Improve setting of gcc debug option

Correct debugging experience is given by passing -Og to compiler.

Do it in a way that supports older compilers

Signed-off-by: Martin Liska <mliska@suse.cz>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/5564393C.1090104@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Assign default value for some pointers

Assign default value for pointers that are identified by the compiler as
non-initialized.

Signed-off-by: Martin Liska <mliska@suse.cz>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/5564393C.1090104@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Use maps__first()/map__next()

In a few more remaining places, for consistency.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-c2n7slwtto29wndfttdrhfrx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Leave DSO destruction to the map destruction

As the way DSOs are created are normally via dsos__findnew, so that we
don't have to load the same dso multiple times for multiple maps (think
about /lib64/libc.so.6), so they may be shared and dso__delete() should
be left to be done as part of the map destruction process.

This will all be properly solved by reference counting struct dso, which
will be done soon.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gbrohe1nvkjxw3u5a1bgj3yh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf machine: Mark removed threads as such

We use:

BUG_ON(!RB_EMPTY_NODE(&thread->rb_node));

in the thread destructor as a debugging check to find out about
possibly still referenced thread instances being deleted, to do that
we need to make sure we use RB_CLEAR_NODE() right after rb_erase(),
i.e. that we use the newly introduced rb_erase_init(), that works
just like list_del_init().

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4fcqo5ypy1cjjf15ilb0hn78@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Import rb_erase_init from block/ in the kernel sources

I was assuming rb_erase() was setting things up like list_del_init, but
the fact that thread__delete() was being sucessfull is because the last
thing before deleting is to remove the thread from the
machine->dead_threads list, using list_del_init(), that has the same
effect as using rb_erase_init()...

Introduce this function so that we can use it when removing objects from
rb_trees.

Then we will be able to BUG_ON(still on a list) in destructors.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-55b16mbtndjyd7zzg8nmnamx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Nuke unused map_groups__flush()

Since:

9fdbf671ba7e "perf tools: do not flush maps on COMM for perf report"

We have no users of this function, nuke it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Luigi Semenzato <semenzato@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hsac1t42ehtva8gut8qe6hih@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Remove redundant initialization of thread linkage members

A thread moves from a rb tree to a list, but can't be on both, because
those linkage members are in a union. This is leftover from when I was
debugging thread refcounting and had nuked that union.

It is harmless duplication, as RB_CLEAR_NODE() does again what
INIT_LIST_HEAD does.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hmma9lmip6qlhzhgkhp9tzd1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Rename maps__next

It really is a 'struct map' method, and since we're introducing a new
'struct maps' class, fix it to avoid confusion.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xo9ifhk53cfl30wqcuhxpnvl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add dso__data_get/put_fd()

Using dso__data_fd() in multi-thread environment is not safe since
returned fd can be closed and/or reused anytime.

So convert it to the dso__data_get/put_fd() pair to protect the access
with lock.

The original dso__data_fd() is deprecated and kept only for testing.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432137821-10853-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Get rid of dso__data_fd() from dso__data_size()

It seems that the dso__data_fd() was needed to find a binary type
since open in data_file_size() alone used to fail.

But as it can open the dso fine now, the dso__data_fd() can go away.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432137821-10853-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix dso__data_read_offset() file opening

When dso__data_read_offset/addr() is called without prior dso__data_fd()
(or other functions which call it internally), it failed to open dso in
data_file_size() since its binary type was not identified.

However calling dso__data_fd() in dso__data_read_offset() will hurt
performance as it grabs a global lock everytime. So factor out the loop
on the binary type in dso__data_fd(), and call it from both.

Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432137821-10853-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf machine: Do not call map_groups__delete(), drop refcnt instead

It could be used somewhere, so just call map__groups_put() to make sure
we don't delete it prematurely

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-dxmh8mr12i65p8h909vi88cp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf comm: Use atomic.h for refcounting

Now that we have atomic.h, we should convert all of the existing
refcounts to use it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-quzeuy3jwsyod6e06o39cl6y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Rename add_hist_entry to hists__findnew_entry

To match the convention used elsewhere.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-66oo6yn8upssfeuprwy0il1q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Reducing arguments of hist_entry_iter__add()

The evsel and sample arguments are to set iter for later use. As it
also receives an iter as another argument, just set them before calling
the function.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432022650-18205-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf session: Fix perf_session__peek_event()

perf_session__peek_event() generally leverages there being a single mmap
of the perf.data file, however on 32-bit platforms when there is more
that 32MiB of data, then there are multiple mmaps, so
perf_session__peek_event() reads from the file.

In that case a couple of bugs were exposed (note how the seg. fault
appears with >32M of data):

   $ perf record --per-thread -e intel_bts// ../rtit-tests/loopy 1000000
   [ perf record: Woken up 13 times to write data ]
   [ perf record: Captured and wrote 24.568 MB perf.data ]
   $ perf script > /dev/null
   $ perf record --per-thread -e intel_bts// ../rtit-tests/loopy 10000000
   [ perf record: Woken up 136 times to write data ]
   [ perf record: Captured and wrote 270.794 MB perf.data ]
   $ perf script > /dev/null
   Segmentation fault (core dumped)

The wrong address was being passed to the readn() function and the
buffer size was not being checked.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/1432040746-1755-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Fix libunwind feature detection on 32-bit x86

The libunwind feature would never detect because of the following error:

  $ cat tools/build/feature/test-libunwind.make.output
  /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_stream_buffer_decode'
  /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_index_uncompressed_size'
  /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_index_end'
  /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_index_buffer_decode'
  /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_stream_footer_decode'
  /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_index_size'
  collect2: error: ld returned 1 exit status

Fix by adding -llzma and re-ordering to match the dependencies.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/1432040746-1755-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix parse_events_error dereferences

Parse errors can be reported in struct parse_events_error but the
pointer passed is optional and can be NULL. Ensure it is not NULL
before dereferencing it.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/1432040746-1755-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix function declarations needed by parse-events.y

Patch "perf tools: Add location to pmu event terms" moved declarations
for parse_events_term__num() and parse_events_term__str() so that they
were no longer visible in parse-events.y. That can result in segfaults
as the arguments no longer need match the function prototype.

Move the declarations back, changing YYLTYPE pointers to
pointers-to-void because YYLTYPE is not generated until parse-events.y
is processed.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/1432040746-1755-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Separate the tests and tools in installation

This refactors out install-bin to install-tests and install-tools so
that downstream could opt to only install the tools, and not the tests.

Signed-off-by: Nam T. Nguyen <namnguyen@chromium.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Simon Que <sque@chromium.org>
Link: http://lkml.kernel.org/r/1431974247-22275-1-git-send-email-namnguyen@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf/x86/intel/pt: Remove redundant variable declaration

There is a 'pt' variable in the outer scope of pt_event_stop() with the same
type, we don't really need another one in the inner scope.

This patch removes the redundant variable declaration.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1432308626-18845-8-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel/pt: Kill pt_is_running()

Initially, we were trying to guard against scenarios where somebody
attaches to the system with a hardware debugger while PT is enabled
from software and pt_is_running() tries to make sure we handle this
better, but the truth is, there is still a race window no matter what
and people with hardware debuggers should really know what they are
doing anyway.

In other words, there is no point in keeping this one around, and
it's one RDMSR instructions fewer in the fast path.

The case when PT is enabled by the BIOS at boot time is handled
in the driver initialization path and doesn't use pt_is_running().

This patch gets rid of it.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1429622177-22843-6-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel/pt: Document pt_buffer_reset_offsets()

Currently, the description of pt_buffer_reset_offsets() lacks information
about its calling constraints and ordering with regards to other buffer
management functions.

Add a clarification about when this function has to be called.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1429622177-22843-5-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel/pt: Document pt_buffer_reset_markers()

The comments in the driver don't make it absolutely clear as to what
exactly is the calling order and other possible constraints of buffer
management functions.

Document constraints and calling order for the buffer configuration
functions. While at it, replace a redundant check in
pt_buffer_reset_markers() with an explanation why it is not needed.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1429622177-22843-4-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel/pt: Kill an unused variable

Currently, there's a set-but-not-used variable in setup_topa_index();
this patch gets rid of it. And while at it, fixes a style issue with
brackets around a one-line block.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1429622177-22843-2-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Simplify put_exclusive_constraints()

Don't bother with taking locks if we're not actually going to do
anything. Also, drop the _irqsave(), this is very much only called
from IRQ-disabled context.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86: Simplify the x86_schedule_events() logic

!x && y == ! (x || !y)

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Remove intel_excl_states::init_state

For some obscure reason intel_{start,stop}_scheduling() copy the HT
state to an intermediate array. This would make sense if we ever were
to make changes to it which we'd have to discard.

Except we don't. By the time we call intel_commit_scheduling() we're;
as the name implies; committed to them. We'll never back out.

A further hint its pointless is that stop_scheduling() unconditionally
publishes the state.

So the intermediate array is pointless, modify the state in place and
kill the extra array.

And remove the pointless array initialization: INTEL_EXCL_UNUSED == 0.

Note; all is serialized by intel_excl_cntr::lock.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Remove pointless tests

Both intel_commit_scheduling() and intel_get_excl_contraints() test
for cntr < 0.

The only way that can happen (aside from a bug) is through
validate_event(), however that is already captured by the
cpuc->is_fake test.

So remove these test and simplify the code.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Clean up intel_commit_scheduling() placement

Move the code of intel_commit_scheduling() to the right place, which is
in between start() and stop().

No change in functionality.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Make WARN()ings consistent

The intel_commit_scheduling() callback is pointlessly different from
the start and stop scheduling callback.

Furthermore, the constraint should never be NULL, so remove that test.

Even though we'll never get called (because we NULL the callbacks)
when !is_ht_workaround_enabled() put that test in.

Collapse the (pointless) WARN_ON_ONCE() and bail on !cpuc->excl_cntrs --
this is doubly pointless, because its the same condition as
is_ht_workaround_enabled() which was already pointless because the
whole method won't ever be called.

Furthremore, make all the !excl_cntrs test WARN_ON_ONCE(); they're all
pointless, because the above, either the function
({get,put}_excl_constraint) are already predicated on it existing or
the is_ht_workaround_enabled() thing is the same test.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Simplify the dynamic constraint code somewhat

We have two 'struct event_constraint' local variables in
intel_get_excl_constraints(): 'cx' and 'c'.

Instead of using 'cx' after the dynamic allocation, put all 'cx' inside
the dynamic allocation block and use 'c' outside of it.

Also use direct assignment to copy the structure; let the compiler
figure it out.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Add lockdep assert

Lockdep is very good at finding incorrect IRQ state while locking and
is far better at telling us if we hold a lock than the _is_locked()
API. It also generates less code for !DEBUG kernels.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Correct local vs remote sibling state

For some obscure reason the current code accounts the current SMT
thread's state on the remote thread and reads the remote's state on
the local SMT thread.

While internally consistent, and 'correct' its pointless confusion we
can do without.

Flip them the right way around.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel/cqm: Use 'u32' data type for RMIDs

Since we write RMID values to MSRs the correct type to use is 'u32'
because that clearly articulates we're writing a hardware register
value.

Fix up all uses of RMID in this code to consistently use the correct data
type.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Will Auld <will.auld@intel.com>
Link: http://lkml.kernel.org/r/1432285182-17180-1-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel/cqm: Add storage for 'closid' and clean up 'struct intel_pqr_state'

'closid' (CLass Of Service ID) is used for the Class based Cache
Allocation Technology (CAT). Add explicit storage to the per cpu cache
for it, so it can be used later with the CAT support (requires to move
the per cpu data).

While at it:

- Rename the structure to intel_pqr_state which reflects the actual
purpose of the struct: cache values which go into the PQR MSR

- Rename 'cnt' to rmid_usecnt which reflects the actual purpose of
the counter.

- Document the structure and the struct members.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Will Auld <will.auld@intel.com>
Link: http://lkml.kernel.org/r/20150518235150.240899319@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel/cqm: Remove useless wrapper function

intel_cqm_event_del() is a 1:1 wrapper for intel_cqm_event_stop().
Remove the useless indirection.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Will Auld <will.auld@intel.com>
Link: http://lkml.kernel.org/r/20150518235150.159779847@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel/cqm: Avoid pointless MSR write

If the usage counter is non-zero there is no point to update the rmid
in the PQR MSR.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Will Auld <will.auld@intel.com>
Link: http://lkml.kernel.org/r/20150518235150.080844281@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel/cqm: Remove pointless spinlock from state cache

'struct intel_cqm_state' is a strict per CPU cache of the rmid and the
usage counter. It can never be modified from a remote CPU.

The three functions which modify the content: intel_cqm_event[start|stop|del]
(del maps to stop) are called from the perf core with interrupts disabled
which is enough protection for the per CPU state values.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Will Auld <will.auld@intel.com>
Link: http://lkml.kernel.org/r/20150518235150.001006529@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel/cqm: Use proper data types

'int' is really not a proper data type for an MSR. Use u32 to make it
clear that we are dealing with a 32-bit unsigned hardware value.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Will Auld <will.auld@intel.com>
Link: http://lkml.kernel.org/r/20150518235149.919350144@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel/cqm: Document PQR MSR abuse

The CQM code acts like it owns the PQR MSR completely. That's not true
because only the lower 10 bits are used for CQM. The upper 32 bits are
used for the 'CLass Of Service ID' (CLOSID). Document the abuse. Will be
fixed in a later patch.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Will Auld <will.auld@intel.com>
Link: http://lkml.kernel.org/r/20150518235149.823214798@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'perf/urgent' into perf/core, before applying dependent patches

Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86: Tweak broken BIOS rules during check_hw_exists()

I stumbled upon an AMD box that had the BIOS using a hardware performance
counter. Instead of printing out a warning and continuing, it failed and
blocked further perf counter usage.

Looking through the history, I found this commit:

  a5ebe0ba3dff ("perf/x86: Check all MSRs before passing hw check")

which tweaked the rules for a Xen guest on an almost identical box and now
changed the behaviour.

Unfortunately the rules were tweaked incorrectly and will always lead to
MSR failures even though the MSRs are completely fine.

What happens now is in arch/x86/kernel/cpu/perf_event.c::check_hw_exists():

<snip>
        for (i = 0; i < x86_pmu.num_counters; i++) {
                reg = x86_pmu_config_addr(i);
                ret = rdmsrl_safe(reg, &val);
                if (ret)
                        goto msr_fail;
                if (val & ARCH_PERFMON_EVENTSEL_ENABLE) {
                        bios_fail = 1;
                        val_fail = val;
                        reg_fail = reg;
                }
        }

<snip>
        /*
         * Read the current value, change it and read it back to see if it
         * matches, this is needed to detect certain hardware emulators
         * (qemu/kvm) that don't trap on the MSR access and always return 0s.
         */
        reg = x86_pmu_event_addr(0);
^^^^

if the first perf counter is enabled, then this routine will always fail
because the counter is running. :-(

        if (rdmsrl_safe(reg, &val))
                goto msr_fail;
        val ^= 0xffffUL;
        ret = wrmsrl_safe(reg, val);
        ret |= rdmsrl_safe(reg, &val_new);
        if (ret || val != val_new)
                goto msr_fail;

The above bios_fail used to be a 'goto' which is why it worked in the past.

Further, most vendors have migrated to using fixed counters to hide their
evilness hence this problem rarely shows up now days except on a few old boxes.

I fixed my problem and kept the spirit of the original Xen fix, by recording a
safe non-enable register to be used safely for the reading/writing check.
Because it is not enabled, this passes on bare metal boxes (like metal), but
should continue to throw an msr_fail on Xen guests because the register isn't
emulated yet.

Now I get a proper bios_fail error message and Xen should still see their
msr_fail message (untested).

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: george.dunlap@eu.citrix.com
Cc: konrad.wilk@oracle.com
Link: http://lkml.kernel.org/r/1431976608-56970-1-git-send-email-dzickus@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel/pt: Untangle pt_buffer_reset_markers()

Currently, pt_buffer_reset_markers() is a difficult to read knot of
arithmetics with a redundant check for multiple-entry TOPA capability,
a commented out wakeup marker placement and a logical error wrt to
stop marker placement. The latter happens when write head is not page
aligned and results in stop marker being placed one page earlier than
it actually should.

All these problems only affect PT implementations that support
multiple-entry TOPA tables (read: proper scatter-gather).

For single-entry TOPA implementations, there is no functional impact.

This patch deals with all of the above. Tested on both single-entry
and multiple-entry TOPA PT implementations.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1432308626-18845-4-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf: Disallow sparse AUX allocations for non-SG PMUs in overwrite mode

PMUs that don't support hardware scatter tables require big contiguous
chunks of memory and a PMI to switch between them. However, in overwrite
using a PMI for this purpose adds extra overhead that the users would
like to avoid. Thus, in overwrite mode for such PMUs we can only allow
one contiguous chunk for the entire requested buffer.

This patch changes the behavior accordingly, so that if the buddy allocator
fails to come up with a single high-order chunk for the entire requested
buffer, the allocation will fail.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1432308626-18845-2-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86: Improve HT workaround GP counter constraint

The (SNB/IVB/HSW) HT bug only affects events that can be programmed
onto GP counters, therefore we should only limit the number of GP
counters that can be used per cpu -- iow we should not constrain the
FP counters.

Furthermore, we should only enfore such a limit when there are in fact
exclusive events being scheduled on either sibling.

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
[ Fixed build fail for the !CONFIG_CPU_SUP_INTEL case. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86: Fix event/group validation

Commit 43b4578071c0 ("perf/x86: Reduce stack usage of
x86_schedule_events()") violated the rule that 'fake' scheduling; as
used for event/group validation; should not change the event state.

This went mostly un-noticed because repeated calls of
x86_pmu::get_event_constraints() would give the same result. And
x86_pmu::put_event_constraints() would mostly not do anything.

Commit e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption
bug workaround") made the situation much worse by actually setting the
event->hw.constraint value to NULL, so when validation and actual
scheduling interact we get NULL ptr derefs.

Fix it by removing the constraint pointer from the event and move it
back to an array, this time in cpuc instead of on the stack.

validate_group()
  x86_schedule_events()
    event->hw.constraint = c; # store

      <context switch>
        perf_task_event_sched_in()
          ...
            x86_schedule_events();
              event->hw.constraint = c2; # store

              ...

              put_event_constraints(event); # assume failure to schedule
                intel_put_event_constraints()
                  event->hw.constraint = NULL;

      <context switch end>

    c = event->hw.constraint; # read -> NULL

    if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref

This in particular is possible when the event in question is a
cpu-wide event and group-leader, where the validate_group() tries to
add an event to the group.

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Hunter <ahh@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()")
Fixes: e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround")
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf: Fix race in BPF program unregister

there is a race between perf_event_free_bpf_prog() and free_trace_kprobe():

__free_event()
  event->destroy(event)
    tp_perf_event_destroy()
      perf_trace_destroy()
perf_trace_event_unreg()

which is dropping event->tp_event->perf_refcount and allows to proceed in:

unregister_trace_kprobe()
  unregister_kprobe_event()
      trace_remove_event_call()
    probe_remove_event_call()
free_trace_kprobe()

while __free_event does:

call_rcu(&event->rcu_head, free_event_rcu);
  free_event_rcu()
    perf_event_free_bpf_prog()

To fix the race simply move perf_event_free_bpf_prog() before
event->destroy(), since event->tp_event is still valid at that point.

Note, perf_trace_destroy() is not racing with trace_remove_event_call()
since they both grab event_mutex.

Reported-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: lizefan@huawei.com
Cc: pi3orama@163.com
Fixes: 2541517c32be ("tracing, perf: Implement BPF programs attached to kprobes")
Link: http://lkml.kernel.org/r/1431717321-28772-1-git-send-email-ast@plumgrid.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Linux 4.1-rc5

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"This is a set of five fixes: Two MAINTAINER email updates (urgent
  because the non-avagotech emails will start bouncing) an lpfc big
  endian oops fix, a 256 byte sector hang fix (to eliminate 256 byte
  sectors) and a storvsc fix which could cause test unit ready failures
  on bringup"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  MAINTAINERS: Revise lpfc maintainers for Avago Technologies ownership of Emulex
  MAINTAINERS, be2iscsi: change email domain
  sd: Disable support for 256 byte/sector disks
  lpfc: Fix breakage on big endian kernels
  storvsc: Set the SRB flags correctly when no data transfer is needed

Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fix from Thomas Gleixner:
"One more fix from the timer departement:

    - Handle division of negative nanosecond values proper on 32bit.

      A recent cleanup wrecked the sign handling of the dividend and
      dropped the check for negative divisors"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ktime: Fix ktime_divns to do signed division

Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irqchip fix from Thomas Gleixner:
"A fix for a GIC-V3 irqchip regression which prevents some systems from
booting"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gicv3-its: ITS table size should not be smaller than PSZ

Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

Pull two Ceph fixes from Sage Weil:
"These fix an issue with the RBD notifications when there are topology
  changes in the cluster"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  Revert "libceph: clear r_req_lru_item in __unregister_linger_request()"
  libceph: request a new osdmap if lingering request maps to no osd

Merge branch 'for-linus-4.1' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
"I fixed up a regression from 4.0 where conversion between different
  raid levels would sometimes bail out without converting.

  Filipe tracked down a race where it was possible to double allocate
  chunks on the drive.

  Mark has a fix for fiemap.  All three will get bundled off for stable
  as well"

* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix regression in raid level conversion
  Btrfs: fix racy system chunk allocation when setting block group ro
  btrfs: clear 'ret' in btrfs_check_shared() loop

Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
"Radeon has two displayport fixes, one for a regression.

  i915 regression flicker fix needed so 4.0 can get fixed.

  A bunch of msm fixes and a bunch of exynos fixes, these two are
  probably a bit larger than I'd like, but most of them seems pretty
  good"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (29 commits)
  drm/radeon: fix error flag checking in native aux path
  drm/radeon: retry dcpd fetch
  drm/msm/mdp5: fix incorrect parameter for msm_framebuffer_iova()
  drm/exynos: dp: Lower level of EDID read success message
  drm/exynos: cleanup exynos_drm_plane
  drm/exynos: 'win' is always unsigned
  drm/exynos: mixer: don't dump registers under spinlock
  drm/exynos: Consolidate return statements in fimd_bind()
  drm/exynos: Constify exynos_drm_crtc_ops
  drm/exynos: Fix build breakage on !DRM_EXYNOS_FIMD
  drm/exynos: mixer: Constify platform_device_id
  drm/exynos: mixer: cleanup pixelformat handling
  drm/exynos: mixer: also allow NV21 for the video processor
  drm/exynos: mixer: remove buffer count handling in vp_video_buffer()
  drm/exynos: plane: honor buffer offset for dma_addr
  drm/exynos: fb: use drm_format_num_planes to get buffer count
  drm/i915: fix screen flickering
  drm/msm: fix locking inconsistencies in gpu->destroy()
  drm/msm/dsi: Simplify the code to get the number of read byte
  drm/msm: Attach assigned encoder to eDP and DSI connectors
  ...

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Don't leak ipvs->sysctl_tbl, from Tommi Rentala.

2) Fix neighbour table entry leak in rocker driver, from Ying Xue.

3) Do not emit bonding notifications for unregistered interfaces, from
    Nicolas Dichtel.

4) Set ipv6 flow label properly when in TIME_WAIT state, from Florent
    Fourcot.

5) Fix regression in ipv6 multicast filter test, from Henning Rogge.

6) do_replace() in various footables netfilter modules is missing a
    check for 0 counters in the datastructure provided by the user.  Fix
    from Dave Jones, and found with trinity.

7) Fix RCU bug in packet scheduler classifier module unloads, from
    Daniel Borkmann.

8) Avoid deadlock in tcp_get_info() by using u64_sync.  From Eric
    Dumzaet.

9) Input packet processing can race with inetdev_destroy() teardown,
    fix potential OOPS in ip_error() by explicitly testing whether the
    inetdev is still attached.  From Eric W Biederman.

10) MLDv2 parser in bridge multicast code breaks too early while
    parsing.  Fix from Thadeu Lima de Souza Cascardo.

11) Asking for settings on non-zero PHYID doesn't work because we do not
    import the command structure from the user and use the PHYID
    provided there.  Fix from Arun Parameswaran.

12) Fix UDP checksums with IPV6 RAW sockets, from Vlad Yasevich.

13) Missing NF_TABLES depends for TPROXY etc can cause build failures,
    fix from Florian Westphal.

14) Fix netfilter conntrack to handle RFC5961 challenge ACKs properly,
    from Jesper Dangaard Brouer.

15) If netlink autobind retry fails, we have to reset the sockets portid
    back to zero.  From Herbert Xu.

16) VXLAN netns exit code unregisters using wrong device, from John W
    Linville.

17) Add some USB device IDs to ath3k and btusb bluetooth drivers, from
    Dmitry Tunin and Wen-chien Jesse Sung.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
  bridge: fix lockdep splat
  net: core: 'ethtool' issue with querying phy settings
  bridge: fix parsing of MLDv2 reports
  ARM: zynq: DT: Use the zynq binding with macb
  net: macb: Disable half duplex gigabit on Zynq
  net: macb: Document zynq gem dt binding
  ipv4: fill in table id when replacing a route
  cdc_ncm: Fix tx_bytes statistics
  ipv4: Avoid crashing in ip_error
  tcp: fix a potential deadlock in tcp_get_info()
  net: sched: fix call_rcu() race on classifier module unloads
  net: phy: Make sure phy_start() always re-enables the phy interrupts
  ipv6: fix ECMP route replacement
  ipv6: do not delete previously existing ECMP routes if add fails
  Revert "netfilter: bridge: query conntrack about skb dnat"
  netfilter: ensure number of counters is >0 in do_replace()
  netfilter: nfnetlink_{log,queue}: Register pernet in first place
  tcp: don't over-send F-RTO probes
  tcp: only undo on partial ACKs in CA_Loss
  net/ipv6/udp: Fix ipv6 multicast socket filter regression
  ...

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"Three small fixes that have been picked up the last few weeks.
  Specifically:

   - Fix a memory corruption issue in NVMe with malignant user
     constructed request.  From Christoph.

   - Kill (now) unused blk_queue_bio(), dm was changed to not need this
     anymore.  From Mike Snitzer.

   - Always use blk_schedule_flush_plug() from the io_schedule() path
     when flushing a plug, fixing a !TASK_RUNNING warning with md.  From
     Shaohua"

* 'for-linus' of git://git.kernel.dk/linux-block:
  sched: always use blk_schedule_flush_plug in io_schedule_out
  nvme: fix kernel memory corruption with short INQUIRY buffers
  block: remove export for blk_queue_bio

Merge tag 'md/4.1-rc4-fixes' of git://neil.brown.name/md

Pull md bugfixes from Neil Brown:
"I have a few more raid5 bugfixes pending, but I want them to get a bit
  more review first.  In the meantime:

   - one serious RAID0 data corruption - caused by recent bugfix that
     wasn't reviewed properly.

   - one raid5 fix in new code (a couple more of those to come).

   - one little fix to stop static analysis complaining about silly rcu
     annotation"

* tag 'md/4.1-rc4-fixes' of git://neil.brown.name/md:
  md/bitmap: remove rcu annotation from pointer arithmetic.
  md/raid0: fix restore to sector variable in raid0_make_request
  raid5: fix broken async operation chain

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
"Updates for the input subsystem.

  The main change is that we tell joydev not to touch "absolute mice",
  such as VMware virtual mouse, as that produced bad result (cursor
  stuck in upper right corner) with games"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: smtpe-ts - wait 50mS until polling for pen-up
  Input: smtpe-ts - use msecs_to_jiffies() instead of HZ
  Input: joydev - don't classify the vmmouse as a joystick
  Input: vmmouse - do not reference non-existing version of X driver
  Input: alps - fix finger jumps on lifting 2 fingers on v7 touchpad
  Input: elantech - fix semi-mt protocol for v3 HW
  Input: sx8654 - fix memory allocation check

Merge git://git./linux/kernel/git/herbert/crypto-2.6

Pull another crypto fix from Herbert Xu:
"Fix ICV corruption in s390/ghash when the same tfm is used by more
than one thread"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: s390/ghash - Fix incorrect ghash icv buffer handling.

bridge: fix lockdep splat

Following lockdep splat was reported :

[   29.382286] ===============================
[   29.382315] [ INFO: suspicious RCU usage. ]
[   29.382344] 4.1.0-0.rc0.git11.1.fc23.x86_64 #1 Not tainted
[   29.382380] -------------------------------
[   29.382409] net/bridge/br_private.h:626 suspicious
rcu_dereference_check() usage!
[   29.382455]
               other info that might help us debug this:

[   29.382507]
               rcu_scheduler_active = 1, debug_locks = 0
[   29.382549] 2 locks held by swapper/0/0:
[   29.382576]  #0:  (((&p->forward_delay_timer))){+.-...}, at:
[<ffffffff81139f75>] call_timer_fn+0x5/0x4f0
[   29.382660]  #1:  (&(&br->lock)->rlock){+.-...}, at:
[<ffffffffa0450dc1>] br_forward_delay_timer_expired+0x31/0x140
[bridge]
[   29.382754]
               stack backtrace:
[   29.382787] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
4.1.0-0.rc0.git11.1.fc23.x86_64 #1
[   29.382838] Hardware name: LENOVO 422916G/LENOVO, BIOS A1KT53AUS 04/07/2015
[   29.382882]  0000000000000000 3ebfc20364115825 ffff880666603c48
ffffffff81892d4b
[   29.382943]  0000000000000000 ffffffff81e124e0 ffff880666603c78
ffffffff8110bcd7
[   29.383004]  ffff8800785c9d00 ffff88065485ac58 ffff880c62002800
ffff880c5fc88ac0
[   29.383065] Call Trace:
[   29.383084]  <IRQ>  [<ffffffff81892d4b>] dump_stack+0x4c/0x65
[   29.383130]  [<ffffffff8110bcd7>] lockdep_rcu_suspicious+0xe7/0x120
[   29.383178]  [<ffffffffa04520f9>] br_fill_ifinfo+0x4a9/0x6a0 [bridge]
[   29.383225]  [<ffffffffa045266b>] br_ifinfo_notify+0x11b/0x4b0 [bridge]
[   29.383271]  [<ffffffffa0450d90>] ? br_hold_timer_expired+0x70/0x70 [bridge]
[   29.383320]  [<ffffffffa0450de8>]
br_forward_delay_timer_expired+0x58/0x140 [bridge]
[   29.383371]  [<ffffffffa0450d90>] ? br_hold_timer_expired+0x70/0x70 [bridge]
[   29.383416]  [<ffffffff8113a033>] call_timer_fn+0xc3/0x4f0
[   29.383454]  [<ffffffff81139f75>] ? call_timer_fn+0x5/0x4f0
[   29.383493]  [<ffffffff8110a90f>] ? lock_release_holdtime.part.29+0xf/0x200
[   29.383541]  [<ffffffffa0450d90>] ? br_hold_timer_expired+0x70/0x70 [bridge]
[   29.383587]  [<ffffffff8113a6a4>] run_timer_softirq+0x244/0x490
[   29.383629]  [<ffffffff810b68cc>] __do_softirq+0xec/0x670
[   29.383666]  [<ffffffff810b70d5>] irq_exit+0x145/0x150
[   29.383703]  [<ffffffff8189f506>] smp_apic_timer_interrupt+0x46/0x60
[   29.383744]  [<ffffffff8189d523>] apic_timer_interrupt+0x73/0x80
[   29.383782]  <EOI>  [<ffffffff816f131f>] ? cpuidle_enter_state+0x5f/0x2f0
[   29.383832]  [<ffffffff816f131b>] ? cpuidle_enter_state+0x5b/0x2f0

Problem here is that br_forward_delay_timer_expired() is a timer
handler, calling br_ifinfo_notify() which assumes either rcu_read_lock()
or RTNL are held.

Simplest fix seems to add rcu read lock section.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Josh Boyer <jwboyer@fedoraproject.org>
Reported-by: Dominick Grift <dac.override@gmail.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: core: 'ethtool' issue with querying phy settings

When trying to configure the settings for PHY1, using commands
like 'ethtool -s eth0 phyad 1 speed 100', the 'ethtool' seems to
modify other settings apart from the speed of the PHY1, in the
above case.

The ethtool seems to query the settings for PHY0, and use this
as the base to apply the new settings to the PHY1. This is
causing the other settings of the PHY 1 to be wrongly
configured.

The issue is caused by the '_ethtool_get_settings()' API, which
gets called because of the 'ETHTOOL_GSET' command, is clearing
the 'cmd' pointer (of type 'struct ethtool_cmd') by calling
memset. This clears all the parameters (if any) passed for the
'ETHTOOL_GSET' cmd. So the driver's callback is always invoked
with 'cmd->phy_address' as '0'.

The '_ethtool_get_settings()' is called from other files in the
'net/core'. So the fix is applied to the 'ethtool_get_settings()'
which is only called in the context of the 'ethtool'.

Signed-off-by: Arun Parameswaran <aparames@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bridge: fix parsing of MLDv2 reports

When more than a multicast address is present in a MLDv2 report, all but
the first address is ignored, because the code breaks out of the loop if
there has not been an error adding that address.

This has caused failures when two guests connected through the bridge
tried to communicate using IPv6. Neighbor discoveries would not be
transmitted to the other guest when both used a link-local address and a
static address.

This only happens when there is a MLDv2 querier in the network.

The fix will only break out of the loop when there is a failure adding a
multicast address.

The mdb before the patch:

dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp
dev ovirtmgmt port bond0.86 grp ff02::2 temp

After the patch:

dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp
dev ovirtmgmt port bond0.86 grp ff02::fb temp
dev ovirtmgmt port bond0.86 grp ff02::2 temp
dev ovirtmgmt port bond0.86 grp ff02::d temp
dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp
dev ovirtmgmt port bond0.86 grp ff02::16 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp
dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp
dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp

Fixes: 08b202b67264 ("bridge br_multicast: IPv6 MLD support.")
Reported-by: Rik Theys <Rik.Theys@esat.kuleuven.be>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Tested-by: Rik Theys <Rik.Theys@esat.kuleuven.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

ARM: zynq: DT: Use the zynq binding with macb

Use the new zynq binding for macb ethernet, since it will disable half
duplex gigabit like the Zynq TRM says to do.

Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: Disable half duplex gigabit on Zynq

According to the Zynq TRM, gigabit half duplex is not supported. Add a
new cap and compatible string so Zynq can avoid advertising that mode.

Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: Document zynq gem dt binding

Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: fill in table id when replacing a route

When replacing an IPv4 route, tb_id member of the new fib_alias
structure is not set in the replace code path so that the new route is
ignored.

Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cdc_ncm: Fix tx_bytes statistics

The tx_curr_frame_payload field is u32. When we try to calculate a
small negative delta based on it, we end up with a positive integer
close to 2^32 instead. So the tx_bytes pointer increases by about
2^32 for every transmitted frame.

Fix by calculating the delta as a signed long.

Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Reported-by: Florian Bruhin <me@the-compiler.org>
Fixes: 7a1e890e2168 ("usbnet: Fix tx_bytes statistic running backward in cdc_ncm")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contain Netfilter fixes for your net tree, they are:

1) Fix a race in nfnetlink_log and nfnetlink_queue that can lead to a crash.
   This problem is due to wrong order in the per-net registration and netlink
   socket events. Patch from Francesco Ruggeri.

2) Make sure that counters that userspace pass us are higher than 0 in all the
   x_tables frontends. Discovered via Trinity, patch from Dave Jones.

3) Revert a patch for br_netfilter to rely on the conntrack status bits. This
   breaks stateless IPv6 NAT transformations. Patch from Florian Westphal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Avoid crashing in ip_error

ip_error does not check if in_dev is NULL before dereferencing it.

IThe following sequence of calls is possible:
CPU A                          CPU B
ip_rcv_finish
    ip_route_input_noref()
        ip_route_input_slow()
                               inetdev_destroy()
    dst_input()

With the result that a network device can be destroyed while processing
an input packet.

A crash was triggered with only unicast packets in flight, and
forwarding enabled on the only network device.   The error condition
was created by the removal of the network device.

As such it is likely the that error code was -EHOSTUNREACH, and the
action taken by ip_error (if in_dev had been accessible) would have
been to not increment any counters and to have tried and likely failed
to send an icmp error as the network device is going away.

Therefore handle this weird case by just dropping the packet if
!in_dev.  It will result in dropping the packet sooner, and will not
result in an actual change of behavior.

Fixes: 251da4130115b ("ipv4: Cache ip_error() routes even when not forwarding.")
Reported-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Tested-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: fix a potential deadlock in tcp_get_info()

Taking socket spinlock in tcp_get_info() can deadlock, as
inet_diag_dump_icsk() holds the &hashinfo->ehash_locks[i],
while packet processing can use the reverse locking order.

We could avoid this locking for TCP_LISTEN states, but lockdep would
certainly get confused as all TCP sockets share same lockdep classes.

[  523.722504] ======================================================
[  523.728706] [ INFO: possible circular locking dependency detected ]
[  523.734990] 4.1.0-dbg-DEV #1676 Not tainted
[  523.739202] -------------------------------------------------------
[  523.745474] ss/18032 is trying to acquire lock:
[  523.750002]  (slock-AF_INET){+.-...}, at: [<ffffffff81669d44>] tcp_get_info+0x2c4/0x360
[  523.758129]
[  523.758129] but task is already holding lock:
[  523.763968]  (&(&hashinfo->ehash_locks[i])->rlock){+.-...}, at: [<ffffffff816bcb75>] inet_diag_dump_icsk+0x1d5/0x6c0
[  523.774661]
[  523.774661] which lock already depends on the new lock.
[  523.774661]
[  523.782850]
[  523.782850] the existing dependency chain (in reverse order) is:
[  523.790326]
-> #1 (&(&hashinfo->ehash_locks[i])->rlock){+.-...}:
[  523.796599]        [<ffffffff811126bb>] lock_acquire+0xbb/0x270
[  523.802565]        [<ffffffff816f5868>] _raw_spin_lock+0x38/0x50
[  523.808628]        [<ffffffff81665af8>] __inet_hash_nolisten+0x78/0x110
[  523.815273]        [<ffffffff816819db>] tcp_v4_syn_recv_sock+0x24b/0x350
[  523.822067]        [<ffffffff81684d41>] tcp_check_req+0x3c1/0x500
[  523.828199]        [<ffffffff81682d09>] tcp_v4_do_rcv+0x239/0x3d0
[  523.834331]        [<ffffffff816842fe>] tcp_v4_rcv+0xa8e/0xc10
[  523.840202]        [<ffffffff81658fa3>] ip_local_deliver_finish+0x133/0x3e0
[  523.847214]        [<ffffffff81659a9a>] ip_local_deliver+0xaa/0xc0
[  523.853440]        [<ffffffff816593b8>] ip_rcv_finish+0x168/0x5c0
[  523.859624]        [<ffffffff81659db7>] ip_rcv+0x307/0x420

Lets use u64_sync infrastructure instead. As a bonus, 64bit
arches get optimized, as these are nop for them.

Fixes: 0df48c26d841 ("tcp: add tcpi_bytes_acked to tcp_info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

Just two small DP fixes for 4.1

* 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: fix error flag checking in native aux path
drm/radeon: retry dcpd fetch

Merge tag 'drm-intel-fixes-2015-05-21' of git://anongit.freedesktop.org/drm-intel into drm-fixes

There's a stable backport from Ander [1] that combines this and a few
other commits to fix the flickering on v4.0, reported in [2] among
others. Having this upstream is obviously a requirement for stable.

* tag 'drm-intel-fixes-2015-05-21' of git://anongit.freedesktop.org/drm-intel:
drm/i915: fix screen flickering

crypto: s390/ghash - Fix incorrect ghash icv buffer handling.

Multitheaded tests showed that the icv buffer in the current ghash
implementation is not handled correctly. A move of this working ghash
buffer value to the descriptor context fixed this. Code is tested and
verified with an multithreaded application via af_alg interface.

Cc: stable@vger.kernel.org
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Gerald Schaefer <geraldsc@linux.vnet.ibm.com>
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Merge tag 'for-linus-4.1b-rc4-tag' of git://git./linux/kernel/git/xen/tip

Pull two xen bugfixes from David Vrabel:

- fix ARM build regression.

- fix VIRQ_CONSOLE related oops.

* tag 'for-linus-4.1b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: don't bind non-percpu VIRQs with percpu chip
xen/arm: Define xen_arch_suspend()

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
"This includes a fix for two oopses, one on PPC and on x86.

  The rest is fixes for bugs with newer Intel processors"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm/fpu: Enable eager restore kvm FPU for MPX
  Revert "KVM: x86: drop fpu_activate hook"
  kvm: fix crash in kvm_vcpu_reload_apic_access_page
  KVM: MMU: fix SMAP virtualization
  KVM: MMU: fix CR4.SMEP=1, CR0.WP=0 with shadow pages
  KVM: MMU: fix smap permission check
  KVM: PPC: Book3S HV: Fix list traversal in error case