Arnd Bergmann [Thu, 25 Sep 2014 16:08:56 +0000 (18:08 +0200)]
Merge tag 'renesas-dt5-for-v3.18' of git://git./linux/kernel/git/horms/renesas into next/dt
Pull "Fifth Round of Renesas ARM Based SoC DT Updates for v3.18" from Simon Horman:
* Document manufacturer for KZM boards
* Use SoC-specific irqc compatible property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'renesas-dt5-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Add manufacturer for KZM boards
ARM: shmobile: r8a73a4 dtsi: Add SoC-specific irqc compatible property
Arnd Bergmann [Thu, 25 Sep 2014 16:02:30 +0000 (18:02 +0200)]
Merge tag 'pxa-fix-abi' of https://git./linux/kernel/git/hzhuang1/linux into next/dt
Pull "pxa2xx DT changes" from Haojian Zhuang:
Since DT aren't fully enabled in pxa2xx, it's fine to merge them in v3.18
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'pxa-fix-abi' of https://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux:
ARM: pxa: dts: fix ohci controller compatible string
ARM: pxa: dts: fix mmc controller compatible string
Arnd Bergmann [Thu, 25 Sep 2014 15:54:32 +0000 (17:54 +0200)]
Merge tag 'tegra-for-3.18-dt' of git://git./linux/kernel/git/swarren/linux-tegra into next/dt
Pull "ARM: tegra: device tree changes for 3.18" from Stephen Warren:
The main highlights are:
* SATA and PCIe support added to Tegra124, and enabled on Jetson TK1.
* Touchpad enabled on Venice2 (although the driver still has a few issues
to be worked out).
* NVIDIA reference boards rely on the bootloader to program the pinmux.
* Support added for the Acer Chromebook 13 (CB5).
* DT nodes added for the Tegra flow controller HW module. This will
help reduce use of iomap.h in a future code cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'tegra-for-3.18-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: enable PCIe in Jetson TK1 DT
ARM: tegra: add PCIe to Tegra124 DT
ARM: tegra: rely on bootloader pinmux programming on Tegra124
ARM: tegra: add Acer Chromebook 13 device tree
ARM: tegra: Move pwm and dpaux labels to tegra124.dtsi
ARM: tegra: add touchpad to Venice2 DT
ARM: tegra: Add device tree nodes for flow controller
ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables
ARM: tegra: Add SATA and SATA power to Jetson TK1 device tree
ARM: tegra: Add SATA controller to Tegra124 device tree
Arnd Bergmann [Thu, 25 Sep 2014 15:50:36 +0000 (17:50 +0200)]
Merge tag 'at91-dt3' of git://github.com/at91linux/linux-at91 into next/dt
Pull "More AT91 DT material for 3.18" from Nicolas Ferre:
- specify DMA channels for USART on sama5d3 and choose peripherals
that will use them on the EK boards
- SSC update for audio on at91sam9rl and at91sam9g20
- addition of the NFC clock and new pinctrl compatible string
to use enhancements that will land in drivers during this release
- several new nodes and fixes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'at91-dt3' of git://github.com/at91linux/linux-at91:
ARM: at91/dt: at91sam9m10g45ek add rtc node
ARM: at91/dt: sama5d3: use new pinctrl compatible string
ARM: at91/dt: sama5d3: add the nfc clock
ARM: at91/dt: declare sckc node on at91sam9g45
ARM: at91/dt: Fix typo regarding can0_clk
ARM: at91/dt: at91sam9g20: switch ssc compatible string
ARM: at91/dt: at91sam9rl: switch ssc compatible string
ARM: at91: sama5d3xek: reserve dma channel for audio
ARM: at91: sama5d3: add usart dma configurations
Arnd Bergmann [Thu, 25 Sep 2014 15:47:26 +0000 (17:47 +0200)]
Merge tag 'zynq-dt-for-3.18' of git://git.xilinx.com/linux-xlnx into next/dt
Pull "arm: Xilinx Zynq dt patches for v3.18" from Michal Simek:
- Add eth phys
- Add led for zc702
- Various dts cleanups
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'zynq-dt-for-3.18' of git://git.xilinx.com/linux-xlnx:
ARM: zynq: Add ISL9305 regulator on Parallella board
ARM: zynq: DT: Add Ethernet phys
ARM: zynq: DT: Fix coding style issues in dtsi
ARM: zynq: DT: Describe interrupt-names for pl330
ARM: zynq: DT: Extend compatible string for zedboard
ARM: zynq: DT: Use 0x prefix for memory nodes
ARM: zynq: DT: Update years in header
ARM: zynq: DT: Move size/address properties to dtsi
ARM: zynq: DT: Fix Ethernet phy modes
ARM: zynq: DT: Add LEDs to zc702 DT
Carlo Caione [Wed, 10 Sep 2014 20:17:19 +0000 (22:17 +0200)]
ARM: meson: documentation: add bindings documentation
Add vendor prefixes and basic documentation for MesonX SoCs bindings
Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Carlo Caione [Tue, 9 Sep 2014 20:12:56 +0000 (22:12 +0200)]
ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS
The Meson6 SoC is produced by Amlogic inc. and it is based on 2 Cortex
A9 and an ARM Mali-400 GPU.
This patch adds two basic DTSI for the preliminary support of Meson and
Meson6 SoCs. Another DTS is also added for supporting the atv1200 board,
produced by Geniatech inc.
Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Olof Johansson [Wed, 24 Sep 2014 18:29:31 +0000 (11:29 -0700)]
Merge tag 'imx-dt-3.18' of git://git./linux/kernel/git/shawnguo/linux into next/dt
Merge "ARM: imx: device tree changes for 3.18" from Shawn Guo:
The i.MX device tree changes for 3.18:
- Device tree support for i.MX ADS and Armadeus APF9328 boards
- Enable thermal sensor support for i.MX6SL
- Add LCD support for i.MX6SL EVK board
- Fix display duplicate name for a bunch of board dts files
- Configure imx6qdl-sabresd board pins locally to remove the dependency
on bootloader
- A set of imx28-tx28 board dts updates from Lothar
- Add pci config space as platform resource
- Enable devices RTC, I2C and HDMI for nitrogen6x board
- Split HummingBoard DT to support s/dl and d/q
- mSATA and IR input support for HummingBoard
- Add SSI baud clock for i.MX6 device trees
- Add USB support for vf610-colibri and vf610-twr boards
- A set of cleanup and updates on Gateworks boards
* tag 'imx-dt-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (86 commits)
ARM: dts: imx6: make gpt per clock can be from OSC
ARM: dts: imx: ventana: add canbus support for GW52xx
ARM: dts: imx: ventana: cleanup pinctrl groups
ARM: dts: imx: ventana: configure padconf for all pins
ARM: dts: imx: ventana: use gpio constants
ARM: dts: imx: ventana: remove unused aliases
ARM: dts: imx: ventana: remove unsupported dt nodes
ARM: dts: imx28-tx28: add alias for CAN XCVR regulator
ARM: dts: imx28-tx28: add spi-gpio as alternative for spi-mxs
ARM: dts: imx28-tx28: use GPIO flags
ARM: dts: imx28-tx28: remove spidev labels and add third instance of spidev
ARM: dts: imx6sl: add baud clock and clock-names for ssi
ARM: dts: imx6qdl: add baud clock and clock-names for ssi
ARM: dts: imx6qdl-sabresd: Configure the pins locally
ARM: dts: imx28-m28evk: Fix display duplicate name warning
ARM: dts: imx28-tx28: Fix display duplicate name warning
ARM: dts: imx28-m28cu: Fix display duplicate name warning
ARM: dts: imx28-cfa100: Fix display duplicate name warning
ARM: dts: imx28-apf28dev: Fix display duplicate name warning
ARM: dts: imx28-apx4devkit: Fix display duplicate name warning
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Matthias Brugger [Mon, 18 Aug 2014 14:58:00 +0000 (16:58 +0200)]
ARM: dts: mt6589: Change compatible string for GIC
This patch changes the compatible string of the GIC to the
new "arm,cortex-a7-gic" which does reflect the actual hardware.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Matthias Brugger [Mon, 18 Aug 2014 14:58:00 +0000 (16:58 +0200)]
ARM: dts: mediatek: Add compatible property for aquaris5
Add the missing 'compatible' property to device tree root node of
- mt6589-aquaris5.dts
and document the new values.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Matthias Brugger [Mon, 18 Aug 2014 14:58:00 +0000 (16:58 +0200)]
ARM: dts: mt6589-aquaris5: Add boot argument earlyprintk
Add boot argument for earlyprintk to the aquaris5 device tree file.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Matthias Brugger [Mon, 18 Aug 2014 14:58:00 +0000 (16:58 +0200)]
ARM: dts: mt6589: Fix typo in GIC unit address
This changes the unit address of the gic node to it's first register area.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Matthias Brugger [Mon, 18 Aug 2014 14:58:00 +0000 (16:58 +0200)]
ARM: dts: Build dtb for Mediatek board
This allows the "make dtbs" to build the aquaris5 dtb for the Mediatek
SoC.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 24 Sep 2014 17:38:57 +0000 (10:38 -0700)]
Merge tag 'mvebu-dt-3.18' of git://git.infradead.org/linux-mvebu into next/dt
Merge "ARM: mvebu: DT changes for v3.18" from Jason Cooper:
mvebu DT changes for v3.18
- Armada 375
- Add RTC support
- Armada 370
- Add proper pinmuxing
- Add SSCG
- Add gpio-fan
- Add LED support
- change Intersil vendor prefix to isil
- use improved Armada SPI compatible string
* tag 'mvebu-dt-3.18' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: add user LED support of Armada 370 RD
ARM: mvebu: add gpio fan support to Armada 370 RD
ARM: mvebu: Change vendor prefix for Intersil Corporation to isil
ARM: mvebu: use improved armada spi device tree compatible name
ARM: mvebu: add SSCG to Armada 370 Device Tree
ARM: mvebu: Add proper pin muxing on Armada 370 RD board
ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 104
ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 102
ARM: mvebu: Add proper pin muxing on the Armada 370 DB board
ARM: mvebu: Add proper pin muxing on Globalscale Mirabox board
ARM: mvebu: Add network pin mux configuration for the Armada 370 SoC
ARM: mvebu: Add RTC support for Armada 375
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 24 Sep 2014 05:27:38 +0000 (22:27 -0700)]
Merge tag 'v3.18-rockchip-dts2-v2' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt
Merge "second bunch of dts changes for 3.18" from Heiko Stubner:
More peripheral support for Rockchip SoCs
- dwc2 usb controllers
- spi controllers
- emmc controller
* tag 'v3.18-rockchip-dts2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Remove "regulator-always-on" in vcc_rmii for Radxa Rock
ARM: dts: rockchip: fix rk3188 emmc pull references
ARM: dts: rockchip: fix swapped Radxa Rock pinctrl references
ARM: dts: rockchip: clean up rk3xxx mmc nodes
ARM: dts: rockchip: add emmc nodes for rk3066 and rk3188
ARM: dts: rockchip: add Cortex-A9 SPI controller nodes
ARM: dts: rockchip: enable usb ports on Radxa Rock
ARM: dts: rockchip: add dwc2 controllers for rk3066 and rk3188
ARM: dts: rockchip: remove rockchip,bus-index from rk3xxx i2c0
ARM: dts: Switch i2c0 to 400kHz on rk3288-evb-rk808
ARM: dts: Add rk808 PMIC to rk3288-evb-rk808
ARM: dts: Add mshc aliases for rk3288
ARM: dts: Add SPI nodes to rk3288
ARM: dts: Enable USB host1(dwc) on rk3288-evb
ARM: dts: add rk3288 dwc2 controller support
ARM: dts: Add sdio0 and sdio1 to the rk3288
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 24 Sep 2014 05:26:19 +0000 (22:26 -0700)]
Merge tag 'qcom-dt-for-3.18-2' of git://git./linux/kernel/git/galak/linux-qcom into next/dt
Merge "qcom DT changes for v3.18-2" from Kumar Gala:
Qualcomm ARM Based Device Tree Updates for v3.18-2
* Added SDCC nodes on MSM8960/CDP and MSM8660/SURF
* Added I2C and SDCC4/WLAN on APQ8064/IFC6410
* Added I2C on MSM8984/DB8074
* tag 'qcom-dt-for-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
ARM: DT: msm8960: Add sdcc nodes
ARM: DT: msm8660: Add sdcc nodes
ARM: DT: apq8064: Add i2c device nodes
ARM: DT: apq8064: add support to sdcc4 for wlan.
ARM: dts: qcom: Add I2C dt node for MSM8974 and DB8074 board
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 24 Sep 2014 05:25:39 +0000 (22:25 -0700)]
Merge tag 'qcom-dt-for-3.18' of git://git./linux/kernel/git/galak/linux-qcom into next/dt
Merge "qcom DT changes for v3.18" from Kumar Gala:
Qualcomm ARM Based Device Tree Updates for v3.18
* Added APQ8084 dt support for clocks, serial, pinctrl, and IFC6540 board
* Added IPQ8064 dt support for basic SoC and AP148 board
* Added APQ8064 dt support for pinctrl, reset, SDHC, and multimedia clocks
* Added PMIC 8058 dt support on MSM8660, enables PMIC based power key,
keypad, rtc, and vibrator
* Added PMIC 8921 dt support on MSM8960, enables PMIC based power key,
keypad, and rtc
* tag 'qcom-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
ARM: DT: QCOM: apq8064: Add dma support for sdcc node
ARM: DT: apq8064: Add sdcc support via mcci driver.
ARM: dts: qcom: Add 8064 multimedia clock controller node
ARM: DT: APQ8064: Add node for ps_hold function in pinctrl
ARM: DT: APQ8064: Add pinctrl support
ARM: dts: qcom: Add TLMM DT node for APQ8084
ARM: dts: qcom: Add initial IFC6540 board device tree
ARM: dts: msm: Add 8058 PMIC to ssbi bus
ARM: dts: msm: Add 8921 PMIC to ssbi bus
ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees
ARM: dts: qcom: Add APQ8084 serial port DT node
ARM: dts: qcom: Add APQ8084 Global Clock Controller DT node
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 24 Sep 2014 05:11:05 +0000 (22:11 -0700)]
Merge tag 'dt-for-v3.18' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
Merge "omap dts changes for v3.18 merge window" from Tony Lindgren:
Changes for .dts files for omaps for v3.18 merge window:
- Updates for gta04 to add gta04a3 model
- Add support for Tehnexion TAO3530 boards
- Regulator names for beaglebone
- Pinctrl related updates for omap5, dra7 and am437
- Model name fix for sbc-t54
- Enable mailbox for various omaps
* tag 'dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (291 commits)
ARM: dts: OMAP2+: Add sub mailboxes device node information
ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable
ARM: dts: OMAP5 / DRA7: switch over to interrupts-extended property for UART
ARM: dts: AM437x: switch to compatible pinctrl
ARM: dts: DRA7: switch to compatible pinctrl
ARM: dts: OMAP5: switch to compatible pinctrl
ARM: dts: am335x-boneblack: Add names for remaining regulators
ARM: dts: sbc-t54: fix model property
ARM: dts: omap5.dtsi: add DSS RFBI node
ARM: dts: omap3: Add HEAD acoustics omap3-ha.dts and omap3-ha-lcd.dts (TAO3530 based)
ARM: dts: omap3: Add Technexion Thunder support (TAO3530 SOM based)
ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi
ARM: OMAP2+: tao3530: Add pdata-quirk for the mmc2 internal clock
ARM: OMAP2+: board-generic: add support for AM57xx family
ARM: dts: dra72-evm: Add tps65917 PMIC node
ARM: dts: dra72-evm: Enable I2C1 node
Linux 3.17-rc3
unicore32: Fix build error
vexpress/spc: fix a build warning on array bounds
spi: sh-msiof: Fix transmit-only DMA transfers
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Stephen Boyd [Fri, 19 Sep 2014 23:50:51 +0000 (16:50 -0700)]
ARM: DT: msm8960: Add sdcc nodes
Add the sdcc nodes to support the SD card controller using pl180
mmci driver. We also add a temporary fixed regulator until the
regulator driver is mainlined.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Stephen Boyd [Fri, 19 Sep 2014 23:50:50 +0000 (16:50 -0700)]
ARM: DT: msm8660: Add sdcc nodes
Add the sdcc nodes to support the SD card controller using pl180
mmci driver. We also add a temporary fixed regulator until the
regulator driver is mainlined.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Romain Perier [Fri, 19 Sep 2014 12:36:27 +0000 (12:36 +0000)]
ARM: dts: rockchip: Remove "regulator-always-on" in vcc_rmii for Radxa Rock
On Rockchip RK3188 SoCs the platform driver emac_rockchip is used. This variant driver
enables this regulator when the device driver is loaded. The phy no longer needs
to be always on.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Daniel Mack [Thu, 14 Aug 2014 09:46:13 +0000 (11:46 +0200)]
ARM: pxa: dts: fix ohci controller compatible string
The vendor prefix was renamed from "mrvl" to "marvell". Follow this
change in the dts file.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Daniel Mack [Thu, 14 Aug 2014 09:46:12 +0000 (11:46 +0200)]
ARM: pxa: dts: fix mmc controller compatible string
The vendor prefix was renamed from "mrvl" to "marvell". Follow this
change in the dts file.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Erik van Luijk [Tue, 2 Sep 2014 10:52:12 +0000 (12:52 +0200)]
ARM: at91/dt: at91sam9m10g45ek add rtc node
Add rtc node to both the at91sam9g45 SoC family and the at91sam9m10g45ek board.
Signed-off-by: Erik van Luijk <evanluijk@interact.nl>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Marek Roszko [Sun, 24 Aug 2014 03:12:05 +0000 (23:12 -0400)]
ARM: at91/dt: sama5d3: use new pinctrl compatible string
This switches the SAMA5D3 to use the new atmel,sama5d3-pinctrl id that was
added with the drive strength options patch.
Signed-off-by: Marek Roszko <mark.roszko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
[nicolas.ferre@atmel.com: second compatible string kept as at91sam9x5]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Tue, 16 Sep 2014 08:43:57 +0000 (10:43 +0200)]
ARM: at91/dt: sama5d3: add the nfc clock
The atmel_nand driver is now able to handle the nfc clock, add it to sama5d3.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Boris BREZILLON [Tue, 9 Sep 2014 10:14:20 +0000 (12:14 +0200)]
ARM: at91/dt: declare sckc node on at91sam9g45
Declare the SCKC (Slow Clock Configuration) block and its clks.
Make use of the clk32k clk instead of slow_osc where appropriate.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
David Dueck [Wed, 17 Sep 2014 08:33:32 +0000 (10:33 +0200)]
ARM: at91/dt: Fix typo regarding can0_clk
Otherwise the clock for can0 will never get enabled.
Signed-off-by: David Dueck <davidcdueck@googlemail.com>
Signed-off-by: Anthony Harivel <anthony.harivel@emtrion.de>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: stable@vger.kernel.org # v3.14
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Bo Shen [Wed, 11 Jun 2014 10:14:42 +0000 (18:14 +0800)]
ARM: at91/dt: at91sam9g20: switch ssc compatible string
As the SSC integrate in at91sam9g20 support frame sync length
extension, so switch compatible string to support this feature.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Bo Shen [Wed, 11 Jun 2014 10:14:41 +0000 (18:14 +0800)]
ARM: at91/dt: at91sam9rl: switch ssc compatible string
As the SSC integrate in at91sam9rl support frame sync length
extension, so switch compatible string to support this feature.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Bo Shen [Thu, 18 Sep 2014 12:56:43 +0000 (14:56 +0200)]
ARM: at91: sama5d3xek: reserve dma channel for audio
We set the DMA configuration on USARTs in the SoC DT in (ARM: at91: sama5d3:
add usart dma configurations). As the audio must work with DMA channels, we
reserve some dma channels for audio, or else audio won't work.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
[nicolas.ferre@atmel.com: move to the sama5d3xmb.dtsi to cover all board variants]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
kiran.padwal@smartplayin.com [Wed, 17 Sep 2014 10:30:25 +0000 (16:00 +0530)]
ARM: DT: apq8064: Add i2c device nodes
This patch adds i2c pinctrl DT node for IFC6410 board. It also adds
necessary DT support for i2c eeprom which is present on IFC6410.
Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Srinivas Kandagatla [Wed, 17 Sep 2014 05:39:35 +0000 (06:39 +0100)]
ARM: DT: apq8064: add support to sdcc4 for wlan.
This patch adds sdcc4 node to enable wlan support on IFC6410
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
kiran.padwal@smartplayin.com [Tue, 16 Sep 2014 11:45:38 +0000 (17:15 +0530)]
ARM: dts: qcom: Add I2C dt node for MSM8974 and DB8074 board
Add support for i2c controller on the DB8074 board. It also adds necessary
DT support for i2c eeprom which is present on DB8074 board.
Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Thierry Reding [Wed, 17 Sep 2014 16:02:45 +0000 (10:02 -0600)]
ARM: tegra: enable PCIe in Jetson TK1 DT
Enable both PCIe ports, one of which is connected to an onboard ethernet
chip, whereas the other goes to a miniPCIe slot.
Signed-off-by: Thierry Reding <treding@nvidia.com>
[swarren, fixed PCIe supply property names in DT]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Thierry Reding [Wed, 17 Sep 2014 16:02:44 +0000 (10:02 -0600)]
ARM: tegra: add PCIe to Tegra124 DT
Add the PCIe controller device tree node and hook up the PCIe PHY from
the XUSB pad controller.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Geert Uytterhoeven [Tue, 16 Sep 2014 19:57:16 +0000 (21:57 +0200)]
ARM: shmobile: Add manufacturer for KZM boards
KZM-A9-Dual and KZM-A9-GT are manufactured by Kyoto Microcomputer Co.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Heiko Stuebner [Tue, 16 Sep 2014 16:59:36 +0000 (18:59 +0200)]
ARM: dts: rockchip: fix rk3188 emmc pull references
Fix a copy'n'paste error making the rk3188 emmc pinctrl nodes reference
the pcfg_pull_default setting that is not available on rk3188.
Reported-by: Naoki FUKAUMI <naobsd@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Heiko Stuebner [Tue, 16 Sep 2014 16:53:10 +0000 (18:53 +0200)]
ARM: dts: rockchip: fix swapped Radxa Rock pinctrl references
The host and otg regulator pinctrl settings got swapped, making the host
reference the otg pinctrl and the other way round. The actual pins are
correct (gpio0-3 for host and gpio2-31 for otg).
Reported-by: Naoki FUKAUMI <naobsd@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Mark Brown [Sat, 6 Sep 2014 11:40:16 +0000 (12:40 +0100)]
ARM: zynq: Add ISL9305 regulator on Parallella board
There is an ISL9305 regulator on the Parallella board, add it to the DT
along with descriptions of all the supplies.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Soren Brinkmann [Wed, 20 Aug 2014 15:56:59 +0000 (08:56 -0700)]
ARM: zynq: DT: Add Ethernet phys
Add missing Ethernet phys to Zynq DTs.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Anson Huang [Thu, 11 Sep 2014 03:29:41 +0000 (11:29 +0800)]
ARM: dts: imx6: make gpt per clock can be from OSC
Original gpt per clk parent is from ipg_per clk which
may be scaled when system enter low bus mode, as ipg
clk will be lower in low bus mode, to keep system clk
NOT drift, select gpt per clk parent from OSC which
is at fixed freq always.
On i.mx6qdl, add a osc_per clk source for i.mx6q
TO > 1.0 and all i.MX6dl SoC.
On i.mx6sx, just make gpt per clk from OSC.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Tue, 9 Sep 2014 06:07:31 +0000 (23:07 -0700)]
ARM: dts: imx: ventana: add canbus support for GW52xx
The GW52xx baseboard supports CANbus so we enable it, configure its pinmux
and CAN_STBY gpio.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Tue, 9 Sep 2014 06:07:30 +0000 (23:07 -0700)]
ARM: dts: imx: ventana: cleanup pinctrl groups
Follow the conventions for pinctrl:
- grouping pinctrl in logical alphabatized groups
- remove any pinctrl not being used by a driver or needed by user
- move iomuxc to bottom of file for readability
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Tue, 9 Sep 2014 06:07:29 +0000 (23:07 -0700)]
ARM: dts: imx: ventana: configure padconf for all pins
Follow the convention of configuring padconf for all pins and not leaving
any 0x80000000 to leave them un-configured.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Tue, 9 Sep 2014 06:07:28 +0000 (23:07 -0700)]
ARM: dts: imx: ventana: use gpio constants
Use the gpio contants defined in bindings for active high/low
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Tue, 9 Sep 2014 06:07:27 +0000 (23:07 -0700)]
ARM: dts: imx: ventana: remove unused aliases
Remove aliases that are either not used by bootloader or are provided via
included dtsi files.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Tue, 9 Sep 2014 06:07:26 +0000 (23:07 -0700)]
ARM: dts: imx: ventana: remove unsupported dt nodes
The general device-tree rule is to not include nodes that do not have a driver
or bindings in a dts/dtsi. Remove the place-holder nodes from the Gateworks
Ventana boards until a time that a driver with proper bindings exists.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lothar Waßmann [Tue, 9 Sep 2014 11:26:03 +0000 (13:26 +0200)]
ARM: dts: imx28-tx28: add alias for CAN XCVR regulator
This alias is used by U-Boot to enable/disable the regulator depending
on baseboard type.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lothar Waßmann [Tue, 9 Sep 2014 11:26:02 +0000 (13:26 +0200)]
ARM: dts: imx28-tx28: add spi-gpio as alternative for spi-mxs
The spi-mxs driver does not allow full duplex SPI transfers. The
spi-gpio driver may be used as an alternative if this is required.
Make the choice between those drivers easier for the end user by
providing settings for both drivers.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lothar Waßmann [Tue, 9 Sep 2014 11:26:01 +0000 (13:26 +0200)]
ARM: dts: imx28-tx28: use GPIO flags
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lothar Waßmann [Tue, 9 Sep 2014 11:26:00 +0000 (13:26 +0200)]
ARM: dts: imx28-tx28: remove spidev labels and add third instance of spidev
The labels on the spidev nodes are not used and not required, so
remove them. The TX28 supports 3 chipselects on the SPI
interface. Make all those chipselects available to the user.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Shengjiu Wang [Tue, 9 Sep 2014 09:13:27 +0000 (17:13 +0800)]
ARM: dts: imx6sl: add baud clock and clock-names for ssi
Baud clock is used for bit clock generation in master mode. Ipg clock
is peripheral clock and peripheral access clock.
Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Shengjiu Wang [Tue, 9 Sep 2014 09:13:26 +0000 (17:13 +0800)]
ARM: dts: imx6qdl: add baud clock and clock-names for ssi
Baud clock is used for bit clock generation in master mode. Ipg clock
is peripheral clock and peripheral access clock.
Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Fri, 5 Sep 2014 12:46:10 +0000 (09:46 -0300)]
ARM: dts: imx6qdl-sabresd: Configure the pins locally
Passing '0x80000000' to the pin configuration means that kernel will skip the
IOMUXC_SW_PAD_CTL configuration and will use whathever values come from the
bootloader.
Instead of relying on the bootloader setup, let's configure it in the kernel to
have predictable settings.
'0x1b0b0' is the default POR value for all these pins and has also been verified
that the pins are using this value by manually inspecting the IOMUXC_SW_PAD_CTL
registers, so no functional change has been made.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Fri, 5 Sep 2014 01:31:23 +0000 (22:31 -0300)]
ARM: dts: imx28-m28evk: Fix display duplicate name warning
The lcdif node has a property named "display" and also a child node
called "display", which causes the following warning:
device-tree: Duplicate name in lcdif@
80030000, renamed to "display#1"
Rename the child node name in order to avoid the warning.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Fri, 5 Sep 2014 01:31:22 +0000 (22:31 -0300)]
ARM: dts: imx28-tx28: Fix display duplicate name warning
The lcdif node has a property named "display" and also a child node
called "display", which causes the following warning:
device-tree: Duplicate name in lcdif@
80030000, renamed to "display#1"
Rename the child node name in order to avoid the warning.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Fri, 5 Sep 2014 01:31:21 +0000 (22:31 -0300)]
ARM: dts: imx28-m28cu: Fix display duplicate name warning
The lcdif node has a property named "display" and also a child node
called "display", which causes the following warning:
device-tree: Duplicate name in lcdif@
80030000, renamed to "display#1"
Rename the child node name in order to avoid the warning.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Fri, 5 Sep 2014 01:31:20 +0000 (22:31 -0300)]
ARM: dts: imx28-cfa100: Fix display duplicate name warning
The lcdif node has a property named "display" and also a child node
called "display", which causes the following warning:
device-tree: Duplicate name in lcdif@
80030000, renamed to "display#1"
Rename the child node name in order to avoid the warning.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Fri, 5 Sep 2014 01:31:19 +0000 (22:31 -0300)]
ARM: dts: imx28-apf28dev: Fix display duplicate name warning
The lcdif node has a property named "display" and also a child node
called "display", which causes the following warning:
device-tree: Duplicate name in lcdif@
80030000, renamed to "display#1"
Rename the child node name in order to avoid the wa
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Fri, 5 Sep 2014 01:31:18 +0000 (22:31 -0300)]
ARM: dts: imx28-apx4devkit: Fix display duplicate name warning
The lcdif node has a property named "display" and also a child node
called "display", which causes the following warning:
device-tree: Duplicate name in lcdif@
80030000, renamed to "display#1"
Rename the child node name in order to avoid the warning.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Wed, 3 Sep 2014 01:45:14 +0000 (22:45 -0300)]
ARM: dts: imx6sl-evk: Fix display duplicate name warning
The lcdif node has a property named "display" and also a child node
called "display", which causes the following warning:
device-tree: Duplicate name in lcdif@
02220000, renamed to "display#1"
Rename the child node name in order to avoid the warning.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Wed, 3 Sep 2014 01:45:13 +0000 (22:45 -0300)]
ARM: dts: imx23-evk: Fix display duplicate name warning
The lcdif node has a property named "display" and also a child node
called "display", which causes the following warning:
device-tree: Duplicate name in lcdif@
80030000, renamed to "display#1"
Rename the child node name in order to avoid the warning.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Wed, 3 Sep 2014 01:45:12 +0000 (22:45 -0300)]
ARM: dts: imx28-evk: Fix display duplicate name warning
The lcdif node has a property named "display" and also a child node
called "display", which causes the following warning:
device-tree: Duplicate name in lcdif@
80030000, renamed to "display#1"
Rename the child node name in order to avoid the warning.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Tue, 2 Sep 2014 18:00:44 +0000 (15:00 -0300)]
ARM: dts: imx6x-sdb: Add LCD support
Add support for the "MX28LCD Seiko 4.3' WVGA" panel.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Tue, 2 Sep 2014 18:00:43 +0000 (15:00 -0300)]
ARM: dts: imx6sx: Add LCDIF compatible strings
imx6sx has the same LCDIF controller IP as in mx28, so add the proper
compatible strings.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philippe Reynes [Mon, 1 Sep 2014 18:44:32 +0000 (20:44 +0200)]
ARM: dts: apf27dev: add max1027 in the dts
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lucas Stach [Thu, 7 Aug 2014 17:39:41 +0000 (19:39 +0200)]
ARM: imx6: add pci config space as platform resource
Fixes "imx6q-pcie
1ffc000.pcie: missing *config* reg space"
error exposed by new versions of the designware pcie driver.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sun, 31 Aug 2014 11:54:15 +0000 (15:54 +0400)]
ARM: dts: Add support for the i.MX1 Armadeus APF9328 board
This patch adds support for the i.MX1 APF9328 from Armadeus.
This change is intended to further remove non-DT support for this board.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Russell King [Sat, 23 Aug 2014 14:34:07 +0000 (15:34 +0100)]
ARM: dts: hummingboard: fix configuration of IR input
Add the IOMUX setting for the IR input, rather than relying on the
boot loader.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Rabeeh Khoury [Sat, 23 Aug 2014 09:11:47 +0000 (10:11 +0100)]
ARM: dts: hummingboard: gpio-ir on gpio 3,5
HummingBoard after rev 2.0 and the production one starting rev 3.0 uses
gpio 3,5 (EIM_DA5 pad) as the gpio infra red receiver input.
Since the original Carrier1 board is obsolete and we are retiring it,
update the DT file for this. This will mean IR reception will not
work on Carrier1 with this DT file.
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Rabeeh Khoury [Sat, 23 Aug 2014 09:11:42 +0000 (10:11 +0100)]
ARM: dts: hummingboard: add mSATA support for iMX6 quad/dual HummingBoard
Initial patch from Rabeeh, but with the electrical properties added.
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Rabeeh Khoury [Sat, 23 Aug 2014 09:11:36 +0000 (10:11 +0100)]
ARM: dts: hummingboard: Split HummingBoard DT to support s/dl and d/q
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Steffen Trumtrar [Fri, 22 Aug 2014 12:02:27 +0000 (14:02 +0200)]
ARM: dts: i.MX53: add pmu node
The i.MX53 has a Cortex-A8 Performance Monitor Unit.
Add it to the dtsi.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Fri, 22 Aug 2014 09:13:02 +0000 (11:13 +0200)]
ARM: dts: nitrogen6x: Add Intersil ISL1208 RTC
This patch adds the battery backed real time clock connected to I2C1
to the device tree.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Tue, 19 Aug 2014 18:21:14 +0000 (15:21 -0300)]
ARM: dts: imx6sl-evk: Add LCD support
Add support for the "MX28LCD Seiko 4.3' WVGA" panel.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Tue, 19 Aug 2014 18:21:13 +0000 (15:21 -0300)]
ARM: dts: imx6sl-evk.dts: Keep pinctrl nodes sorted
Let's keep pinctrl nodes sorted.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Fri, 22 Aug 2014 21:52:54 +0000 (14:52 -0700)]
ARM: dts: Gateworks GW5520 support (i.MX6)
Add support for the Gateworks GW5520 board.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Tue, 19 Aug 2014 16:00:09 +0000 (20:00 +0400)]
ARM: i.MX: dts: Add simple-card support
This patch adds simple-card support to the i.MX SoCs.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Tue, 19 Aug 2014 06:33:47 +0000 (10:33 +0400)]
ARM: i.MX: dts: Add support for the Freescale i.MX1 ADS board
This patch adds support for the Freescale (Motorola) i.MX1 ADS board.
This change is intended to further remove non-DT support for this board.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Stefan Agner [Mon, 18 Aug 2014 20:07:17 +0000 (22:07 +0200)]
ARM: dts: vf610-twr: Add USB support
Add USB support for Freescale Vybrid tower. The USB hosts over-current
protection signal is not connected to the PHY's over- current
protection, hence we need to disable it.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Stefan Agner [Mon, 18 Aug 2014 20:07:16 +0000 (22:07 +0200)]
ARM: dts: vf610-colibri: Add USB support
Add USB support for Colibri VF61 modules. The Colibri standard pinout
defines a pin for USB over-current. However, due to lack of pinmux
options, the USB hosts over-current protection signal of the Colibri
standard could not be connected to the PHY's over-current protection.
Hence we need to disable the over-current functionality of the USB
controller.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Stefan Agner [Mon, 18 Aug 2014 20:07:14 +0000 (22:07 +0200)]
ARM: dts: vf610: Add usbmisc for non-core registers
Add device tree node for usbmisc which controls the non-core USB
registers. This is required to use the property to disable the over-
current detection.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Stefan Agner [Mon, 18 Aug 2014 20:07:11 +0000 (22:07 +0200)]
ARM: dts: vf610: Add USB PHY and controller
This adds USB PHY and USB controller nodes. Vybrid SoCs have two
independent USB cores which each supports DR (dual role). However,
real OTG is not supported since the OTG ID pin is not available.
The PHYs are located within the anadig register range, hence we need
to change the length of the anadig registers.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Uwe Kleine-König [Fri, 8 Aug 2014 09:24:22 +0000 (11:24 +0200)]
ARM: dts: imx28: add alternative pinmuxing for i2c1
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Marc Kleine-Budde [Fri, 8 Aug 2014 09:24:21 +0000 (11:24 +0200)]
ARM: dts: imx28: add pinmuxing for mmc1
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[ukl: rebase from ancient kernel version]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Michael Grzeschik [Thu, 7 Aug 2014 19:52:40 +0000 (21:52 +0200)]
ARM: dts: imx25-pinfunc: Add several pin configurations
This patch adds pin configurations for:
- csi aud6
- cspi1 uart3
- csi uart5
- cc
- csi sdhc2
- csi cspi3
- sd1 cspi2
- cspi1 pwm
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Markus Pargmann [Thu, 7 Aug 2014 19:52:38 +0000 (21:52 +0200)]
ARM: dts: imx25: remove imx35-sdma compatible
The preloaded script addresses on imx25 and imx35 are different, so
imx25 is not compatible with imx35-sdma unless a custom firmware is
loaded.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Bill Pringlemeir [Tue, 5 Aug 2014 17:34:01 +0000 (13:34 -0400)]
ARM: dts: vf610-twr: Add ttyLP2 device.
The ttyLP1 is already the default console/serial port. The
tower board will route ttyLP2 to the same connectors depending
on the JP23/24 settings.
See:
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-July/276457.html
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-July/275576.html
Signed-off-by: Bill Pringlemeir <bpringlemeir@nbsps.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Anson Huang [Tue, 5 Aug 2014 09:34:52 +0000 (17:34 +0800)]
ARM: dts: add thermal sensor support for i.mx6sl
Add thermal sensor support for i.MX6SL.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Alexander Shiyan [Sat, 26 Jul 2014 09:45:29 +0000 (13:45 +0400)]
ARM: dts: i.MX1: Add i.MX1 template
This patch adds basic devicetree template for i.MX1 based SoCs.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Philipp Zabel [Fri, 25 Jul 2014 10:49:53 +0000 (12:49 +0200)]
ARM: dts: nitrogen6x: add i2c3
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Michael Olbrich [Fri, 25 Jul 2014 10:49:52 +0000 (12:49 +0200)]
ARM: dts: nitrogen6x: add hdmi
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Michael Olbrich [Fri, 25 Jul 2014 10:49:51 +0000 (12:49 +0200)]
ARM: dts: nitrogen6x: add i2c2
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lucas Stach [Wed, 23 Jul 2014 17:29:11 +0000 (19:29 +0200)]
ARM: dts: imx6qdl-sabresd: add always on pcie regulator
Everything in the PCI specification assumes devices to be
enumerable on startup. This is only possible if they have
power available.
A future improvement may allow this regulator to be switched
off for D3hot and D3cold power states, but there is a lot
of work to do the pcie host controller side for this to work.
To keep things simple always enable the regulator for now.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Stefan Agner [Fri, 18 Jul 2014 14:25:18 +0000 (16:25 +0200)]
ARM: dts: vf610-colibri: split device tree for carrier boards
The Colibri VF61 is a module which needs a carrier board to actually
run. Different carrier board have different hardware support, hence
we should reflect this in the device tree files. This patch adds the
Colibri Evaluation Board, which supports almost all peripherals
defined in the Colibri standard.
Also align the compatible naming, file splitting and file naming with
the scheme which was choosen for the Tegra based modules.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Shawn Guo [Tue, 16 Sep 2014 02:24:58 +0000 (10:24 +0800)]
Merge branch 'imx/soc' into imx/dt
Shawn Guo [Tue, 16 Sep 2014 02:24:16 +0000 (10:24 +0800)]
Merge tag 'ib-mfd-arm-v3.18' into imx/dt
Immutable branch between MFD and some ARM sub-arch maintainers.
Fabio Estevam [Wed, 10 Sep 2014 02:40:41 +0000 (23:40 -0300)]
ARM: imx_v6_v7_defconfig updates
The rtc isl1208 driver is used by mx6 nitrogen board, so let's enable it by
default.
The fsl sai driver is used by the vf610-twr board, so let's enable it by
default.
simple-audio-card driver is used by the vf610-twr board, so let's enable it by
default.
Generated this patch by doing:
- make imx_v6_v7_defconfig
- make menuconfig and manually select options
- make savedefconfig
- cp defconfig arch/arm/configs/imx_v6_v7_defconfig
,which results in some additional cleanups.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Fri, 5 Sep 2014 14:34:23 +0000 (11:34 -0300)]
ARM: imx_v4_v5_defconfig: Select CONFIG_IMX_WEIM
The imx weim driver is used by some mx27/mx1 boards, so let's enable it by
default.
Generated this patch by doing:
- make imx_v4_v5_defconfig
- make menuconfig and manually select CONFIG_IMX_WEIM
- make savedefconfig
- cp defconfig arch/arm/configs/imx_v4_v5_defconfig
,which results in some additional cleanups.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
projects / openwrt / staging / blogic.git / log