Ben Skeggs [Tue, 7 May 2013 05:54:13 +0000 (15:54 +1000)]
drm/nouveau/bios: fix thinko in ZM_MASK_ADD opcode
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dave Airlie [Thu, 2 May 2013 20:40:37 +0000 (06:40 +1000)]
drm/nouveau: fix build with nv50->nvc0
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ben Skeggs [Sat, 30 Mar 2013 12:21:54 +0000 (22:21 +1000)]
drm/nve0: recognise nvf0 as a kepler board (GK110)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 2 May 2013 06:20:44 +0000 (16:20 +1000)]
drm/nouveau: force noaccel when no PFIFO support present
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sat, 30 Mar 2013 12:31:25 +0000 (22:31 +1000)]
drm/nvf0/disp: expose display class 2.2
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 26 Apr 2013 01:44:26 +0000 (11:44 +1000)]
drm/nouveau/fifo: implement channel creation event generation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 26 Apr 2013 02:03:10 +0000 (12:03 +1000)]
drm/nouveau/core: allow non-maskable events
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 25 Apr 2013 23:17:22 +0000 (09:17 +1000)]
drm/nouveau/timer: allow alarms to be cancelled
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 25 Apr 2013 01:43:54 +0000 (11:43 +1000)]
drm/nouveau/device: tweak the device/subdev relationship a little
Fixes not-in-use engines not having their reset() method called on
resume.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 25 Apr 2013 01:35:18 +0000 (11:35 +1000)]
drm/nouveau/device: enable proper constructor/destructor
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 25 Apr 2013 07:56:03 +0000 (17:56 +1000)]
drm/nouveau/device: have engine object initialised before creation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 25 Apr 2013 07:23:43 +0000 (17:23 +1000)]
drm/nouveau/device: convert to engine, rather than subdev
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Apr 2013 08:04:22 +0000 (18:04 +1000)]
drm/nv50-/disp: use self as parent for subobjects
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Apr 2013 08:02:35 +0000 (18:02 +1000)]
drm/nv50-/fifo: use parent as self for subobjects
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Apr 2013 07:55:28 +0000 (17:55 +1000)]
drm/nv20-nv30/gr: use parent as self for subobjects
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Apr 2013 07:51:20 +0000 (17:51 +1000)]
drm/nvc0-/gr: use self as parent for subobjects
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Apr 2013 07:48:56 +0000 (17:48 +1000)]
drm/nv04-nv40/instmem: use self as parent for subobjects
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Apr 2013 07:46:54 +0000 (17:46 +1000)]
drm/nv04-nv40/vm: use self as parent for subobjects
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Apr 2013 07:44:54 +0000 (17:44 +1000)]
drm/nv50-/bar: use self as parent for subobjects
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Apr 2013 07:38:38 +0000 (17:38 +1000)]
drm/nv04-nv40/instmem: remove parent deref hack
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Apr 2013 07:36:57 +0000 (17:36 +1000)]
drm/nouveau/i2c: remove parent deref hack
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Apr 2013 07:34:18 +0000 (17:34 +1000)]
drm/nouveau/core: rebase object ref/use counts after ctor/init/fini events
This is intended to support named (with a handle, etc) objects having
children that don't have an outside reference.
This will replace the various hacks around the place where subdev
objects have children, and have to manually drop the self-refs so
that they can be destroyed etc when all the outside refs have gone.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 25 Apr 2013 14:12:59 +0000 (00:12 +1000)]
drm/nv50/disp: inform core when we're not creating a new context
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 24 Apr 2013 03:14:02 +0000 (13:14 +1000)]
drm/nouveau/therm: send some messages to debug level
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Christoph Bumiller [Wed, 27 Mar 2013 20:59:11 +0000 (21:59 +0100)]
drm/nve0/gr: add handling for a bunch of PGRAPH traps
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 22 Mar 2013 00:05:03 +0000 (10:05 +1000)]
drm/nouveau/mc: handle irq-related setup ourselves
We need to be able to process interrupts before the DRM code is able to
actually enable them, set it up ourselves. Also, it's less convoluted
to *not* use the DRM wrappers it appears...
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 21 Mar 2013 05:45:11 +0000 (15:45 +1000)]
drm/nv04/disp: hide all the cruft away in its own little hole
It'd be pretty awesome if someone would care enough to port this all
properly to a class interface, perhaps submitting a command stream to
the core via a sw object on PFIFO (emulating how EVO works basically,
and also what nvidia have done forever..)..
But, this seems unlikely given how old this hardware is now, so, lets
just hide it away.
There's a heap of other bits and pieces laying around that are still
tangled. I'll (re)move them in pieces.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 19 Apr 2013 00:22:09 +0000 (10:22 +1000)]
drm/nouveau/bios: add missing newline on IO*_OR opcode debugging
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Mon, 15 Apr 2013 04:47:05 +0000 (14:47 +1000)]
drm/nouveau/bios: suppress some parser errors when dry-running scripts
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Sat, 30 Mar 2013 11:56:26 +0000 (21:56 +1000)]
drm/nve0: magic up some support for GF117
Seen in the wild, don't have the hardware but this hacks things up to
treat it the same as GF119 for now.
Should be relatively safe, I'd be very surprised if anything major
changed outside of PGRAPH. PGRAPH (3D etc) is disabled by default
however until it's confirmed working.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Roy Spliet [Sun, 14 Apr 2013 11:48:45 +0000 (13:48 +0200)]
drm/nvc0-/ltcg: Fix build on 32-bit platforms (v2)
v2: read, don't assume.. *puts on brown paper bag*
Signed-off-by: Roy Spliet <r.spliet@student.tudelft.nl>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Florian Scholz [Tue, 2 Apr 2013 21:16:38 +0000 (23:16 +0200)]
drm/nouveau/drm: adding support for backlight control of GT525M (NVC0)
This patch adds support for the backlight control of the NVIDIA GT
525M, which identifies itself as a member of the NVC0 family.
v2. Extended to handle Kepler too
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Christoph Bumiller [Wed, 27 Mar 2013 21:25:52 +0000 (22:25 +0100)]
drm/nouveau/drm: bump the driver version to 1.1.1 to report new features
Signed-off-by: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Christoph Bumiller [Wed, 27 Mar 2013 21:16:55 +0000 (22:16 +0100)]
drm/nvc0/gr: add software methods to control some MP regs
Signed-off-by: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Christoph Bumiller [Wed, 27 Mar 2013 21:16:54 +0000 (22:16 +0100)]
drm/nvc0-: support NOUVEAU_GETPARAM_GRAPH_UNITS
Signed-off-by: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Christoph Bumiller [Wed, 27 Mar 2013 21:16:53 +0000 (22:16 +0100)]
drm/nvc0-/ltcg: implement VRAM compression
Signed-off-by: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 22 Mar 2013 02:12:17 +0000 (12:12 +1000)]
drm/nouveau/ttm: allow tiled memtype on system memory buffer objects
Compression not supported, and will be silently dropped. Original G80
can't handle this either and requires LINEAR memtype, though it's still
possible to correctly texture and m2mf to/from these objects anyway.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 20 Mar 2013 01:34:32 +0000 (11:34 +1000)]
drm/nve0/grctx: initial attempt at unhardcoding yet more magic
Not sure about the (gpc_nr == 1) condition, it's probably wrong but for
all the examples I've seen so far it matches what NVIDIA end up poking.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sat, 23 Feb 2013 16:15:18 +0000 (17:15 +0100)]
drm/nv50/therm: implement temperature reading
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sat, 23 Feb 2013 15:45:51 +0000 (16:45 +0100)]
drm/nouveau/therm: split the nv50 and nv84 code
This is needed because temperature management on nv50 can be enabled and it
looks about the same as nv40.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Marcin Slusarz [Sat, 2 Mar 2013 19:00:31 +0000 (20:00 +0100)]
drm/nouveau/drm: fix crash in vram manager debug callback
It's probably impossible to hit it now on mainline kernel.
I only noticed it because one of my debugging patches uses it.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 16 Jan 2013 00:05:31 +0000 (10:05 +1000)]
drm/nvc0/fb: ignore readback page alloc failure to support userspace
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 11 Apr 2013 00:12:48 +0000 (10:12 +1000)]
drm/nouveau/disp: fix uninitialised eq_done in error path
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Laurent Pinchart [Tue, 12 Mar 2013 14:38:43 +0000 (15:38 +0100)]
drm/shmobile: Fix race condition between page flip request and handler
The page flip handler stores the page flip event pointer and then calls
drm_vblank_get() to enable the vblank interrupt. Due to the vblank off
delay, the vblank interrupt can be enabled in the hardware at that
point, even if the vblank reference count is equal to 0. If a vblank
interrupt is triggered between storing the event pointer and calling
drm_vblank_get(), the page flip completion handler will process the
event and call drm_vblank_put() with a reference count equal to 0. This
will result in a BUG_ON.
Fix the race condition by calling drm_vblank_get() before storing the
event pointer.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Arnd Bergmann [Thu, 25 Apr 2013 17:28:52 +0000 (19:28 +0200)]
drm: export drm_vm_open_locked
The EXYNOS DRM driver uses drm_vm_open_locked in its mmap() function,
and it can be built as a loadable module, which currently fails.
This exports the symbol from the DRM core to avoid
ERROR: "drm_vm_open_locked" [drivers/gpu/drm/exynos/exynosdrm.ko] undefined!
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Arnd Bergmann [Tue, 23 Apr 2013 16:30:43 +0000 (18:30 +0200)]
drm/tilcdc: use only a single module device table
The tilcdc driver fails to be built as a module because of extraneous
MODULE_DEVICE_TABLE entries:
drivers/gpu/drm/tilcdc/tilcdc_slave.o:(.data+0x54): multiple definition of `__mod_of_device_table'
drivers/gpu/drm/tilcdc/tilcdc_tfp410.o:(.data+0x54): first defined here
drivers/gpu/drm/tilcdc/tilcdc_panel.o:(.data+0x54): multiple definition of `__mod_of_device_table'
drivers/gpu/drm/tilcdc/tilcdc_tfp410.o:(.data+0x54): first defined here
drivers/gpu/drm/tilcdc/tilcdc_drv.o:(.data+0x184): multiple definition of `__mod_of_device_table'
drivers/gpu/drm/tilcdc/tilcdc_tfp410.o:(.data+0x54): first defined here
Since the entire point of these entries is to make the module autoload
when one of the devices is present, it's enough to keep the one entry
for "ti,am33xx-tilcdc", which should always be there if any of the
others are.
Acked-by: Rob Clark <robdclark@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 26 Apr 2013 00:16:10 +0000 (10:16 +1000)]
Merge branch 'gma500-fixes' of git://github.com/patjak/drm-gma500 into drm-next
Two fixes for gma500. First one from Anisse allows us to handle ASLE irqs even
when BIOS doesn't trigger a pipe event irq. The second one allows dual head
setups to have a big shared framebuffer.
* 'gma500-fixes' of git://github.com/patjak/drm-gma500:
drm/gma500: Increase max resolution for mode setting
drm/gma500: fix backlight hotkeys behaviour on netbooks
Patrik Jakobsson [Thu, 25 Apr 2013 20:23:36 +0000 (22:23 +0200)]
drm/gma500: Increase max resolution for mode setting
By having a higher max resolution we can now set up a virtual
framebuffer that spans several monitors. 4096 should be ok since we're
gen 3 or higher and should be enough for most dual head setups.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Anisse Astier [Wed, 24 Apr 2013 15:36:01 +0000 (17:36 +0200)]
drm/gma500: fix backlight hotkeys behaviour on netbooks
Backlight hotkeys weren't working before on certain cedartrail laptops.
The source of this problem is that the hotkeys' ASLE opregion interrupts
were simply ignored. Driver seemed to expect the interrupt to be
associated with a pipe, but it wasn't.
Accepting the ASLE interrupt without an associated pipe event flag fixes
the issue, the backlight code is called when needed, making the
brightness keys work properly.
[patrik: This patch affects irq handling on any netbook with opregion support]
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=833597
Reference: http://lists.freedesktop.org/archives/dri-devel/2012-July/025279.html
Cc: stable@kernel.org
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Sachin Kamat [Sat, 2 Mar 2013 10:23:09 +0000 (15:53 +0530)]
drm/tilcdc: Fix checkpatch error in tilcdc_panel.c
Fixes the following checkpatch error:
ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Sachin Kamat [Sat, 2 Mar 2013 10:23:08 +0000 (15:53 +0530)]
drm/tilcdc: Remove space before tab
Silences the following checkpatch warning:
WARNING: please, no space before tabs
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Sachin Kamat [Sat, 2 Mar 2013 10:23:07 +0000 (15:53 +0530)]
drm/tilcdc: Remove unnecessary braces
Silences the following checkpatch warning:
WARNING: braces {} are not necessary for any arm of this statement
if (priv->rev == 1) {
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Chen Gang [Sun, 10 Mar 2013 05:04:13 +0000 (13:04 +0800)]
drivers/gpu/drm/tilcdc: Makefile, only -Werror when no -W* in EXTRA_CFLAGS
When make with EXTRA_CFLAGS=-W, it will report error.
so give a check in Makefile.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Sachin Kamat [Sat, 2 Mar 2013 10:23:06 +0000 (15:53 +0530)]
drm/tilcdc: Fix an incorrect condition
Instead of checking if num_encoders is zero, it is being assigned 0.
Convert the assignment to a check.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mika Kuoppala [Mon, 22 Apr 2013 11:19:26 +0000 (14:19 +0300)]
fbcon: when font is freed, clear also vc_font.data
commit
ae1287865f5361fa138d4d3b1b6277908b54eac9
Author: Dave Airlie <airlied@redhat.com>
Date: Thu Jan 24 16:12:41 2013 +1000
fbcon: don't lose the console font across generic->chip driver switch
uses a pointer in vc->vc_font.data to load font into the new driver.
However if the font is actually freed, we need to clear the data
so that we don't reload font from dangling pointer.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=892340
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 24 Apr 2013 00:09:23 +0000 (10:09 +1000)]
Merge branch 'drm-next-3.10-2' of git://people.freedesktop.org/~agd5f/linux into drm-next
Alex writes:
A few more updates for 3.10. Nothing too major here. Mostly bug fixes.
The big changes are adding golden register init for 7xx and newer asics
and some audio cleanups.
* 'drm-next-3.10-2' of git://people.freedesktop.org/~agd5f/linux: (32 commits)
drm/radeon: disable UVD advanced semaphore mode
drm/radeon: fix endian bugs in radeon_atom_get_clock_dividers() (v3)
drm/radeon: fix up audio dto programming for DCE2
drm/radeon/evergreen: set SAD registers
drm: add drm_edid_to_eld helper extracting SADs from EDID (v2)
drm/radeon/si: add support for golden register init
drm/radeon/cayman,TN: add support for golden register init (v2)
drm/radeon/evergreen: add support for golden register init
drm/radeon/7xx: add support for golden register init
drm/radeon: add helper function to support golden registers
drm/radeon: fix typo in si_select_se_sh()
drm/radeon: switch audio handling to use callbacks
drm/radeon: clean up audio dto programming
drm/radeon: clean up audio supported check
drm/radeon: raise UVD clocks on init v3
drm/radeon: raise UVD clocks only on demand
drm/radeon: put UVD PLLs in bypass mode
drm/radeon: disable audio format interrupts on Evergreen
drm/radeon: fix hdmi mode enable on RS600/RS690/RS740
drm/radeon/evergreen: write default channel numbers
...
Christian König [Tue, 23 Apr 2013 09:01:31 +0000 (11:01 +0200)]
drm/radeon: disable UVD advanced semaphore mode
Not needed and seems to cause some problems.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 22 Apr 2013 13:59:01 +0000 (09:59 -0400)]
drm/radeon: fix endian bugs in radeon_atom_get_clock_dividers() (v3)
v2: fix copy paste typo.
v3: clarify new union member
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 22 Apr 2013 13:42:07 +0000 (09:42 -0400)]
drm/radeon: fix up audio dto programming for DCE2
Uses a different register than DCE3 asics.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rafał Miłecki [Fri, 19 Apr 2013 17:01:26 +0000 (19:01 +0200)]
drm/radeon/evergreen: set SAD registers
This allows audio (alsa) driver to read them and have a clue about audio
capabilities of connected receiver. This has been verified to be
compatible with fglrx behaviour for Onkyo TX-SR605 and Denon 1912.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rafał Miłecki [Fri, 19 Apr 2013 17:01:25 +0000 (19:01 +0200)]
drm: add drm_edid_to_eld helper extracting SADs from EDID (v2)
Some devices (ATI/AMD cards) don't support passing ELD struct to the
hardware but just require filling specific registers and then the
hardware/firmware does the rest. In such cases we need to read the info
from SAD blocks and put them in the correct registers.
agd5f: note that the returned pointer needs to be kfreed as per
Christian's suggestion.
v2: fix warning
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 1 Mar 2013 22:08:42 +0000 (17:08 -0500)]
drm/radeon/si: add support for golden register init
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 28 Feb 2013 22:58:36 +0000 (17:58 -0500)]
drm/radeon/cayman,TN: add support for golden register init (v2)
v2: add richland support
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 28 Feb 2013 19:40:09 +0000 (14:40 -0500)]
drm/radeon/evergreen: add support for golden register init
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 26 Feb 2013 20:59:47 +0000 (15:59 -0500)]
drm/radeon/7xx: add support for golden register init
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 26 Feb 2013 16:26:51 +0000 (11:26 -0500)]
drm/radeon: add helper function to support golden registers
Golden registers are arrays of register settings from the
hw team that need to be initialized at asic startup.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 18 Apr 2013 20:26:36 +0000 (16:26 -0400)]
drm/radeon: fix typo in si_select_se_sh()
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Thu, 18 Apr 2013 15:32:16 +0000 (11:32 -0400)]
drm/radeon: switch audio handling to use callbacks
Register audio callbacks for asic where we support
audio. Cleans up the code and makes it easier to
add support for newer asics.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 18 Apr 2013 14:50:55 +0000 (10:50 -0400)]
drm/radeon: clean up audio dto programming
Split into DCE2/3 and DCE4/5 variants. Still todo is to
calculate the DTO dividers properly. Add proper formula
to the comments.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 18 Apr 2013 14:32:39 +0000 (10:32 -0400)]
drm/radeon: clean up audio supported check
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 19 Apr 2013 14:14:19 +0000 (16:14 +0200)]
drm/radeon: raise UVD clocks on init v3
v2: not only raise the clocks on VCPU boot, but also on IB test.
v3: agd5f: fix r600_uvd_init return value.
fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=63730
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 18 Apr 2013 13:25:59 +0000 (15:25 +0200)]
drm/radeon: raise UVD clocks only on demand
That not only saves some power, but also solves problems with
older chips where an idle UVD block on higher clocks can
cause problems.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 18 Apr 2013 13:25:58 +0000 (15:25 +0200)]
drm/radeon: put UVD PLLs in bypass mode
Just power down the PLL when we get a VCLK or DCLK of zero.
Enabling the bypass mode early should also allow us to
switch UVD clocks on the fly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 18 Apr 2013 13:42:13 +0000 (09:42 -0400)]
drm/radeon: disable audio format interrupts on Evergreen
The audio format change interrupts are an aid in debugging,
but not required for operation.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 18 Apr 2013 13:36:42 +0000 (09:36 -0400)]
drm/radeon: fix hdmi mode enable on RS600/RS690/RS740
These chips were previously skipped since they are
pre-R600.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Rafał Miłecki [Sat, 13 Apr 2013 23:26:24 +0000 (01:26 +0200)]
drm/radeon/evergreen: write default channel numbers
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rafał Miłecki [Thu, 18 Apr 2013 13:26:08 +0000 (09:26 -0400)]
drm/radeon/evergreen: reorder HDMI setup
Driver fglrx setups audio and ACR packets after basic initialization,
which sounds sane, do the same.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rafał Miłecki [Thu, 18 Apr 2013 13:23:12 +0000 (09:23 -0400)]
drm/radeon/evergreen: setup HDMI before enabling it
Closed source driver fglrx seems to enable infoframes and audio packets
at the end, which makes sense, do the same.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rafał Miłecki [Sat, 13 Apr 2013 23:26:19 +0000 (01:26 +0200)]
drm/radeon: add helpers for masking and setting bits in regs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Sun, 14 Apr 2013 10:47:59 +0000 (12:47 +0200)]
drm/radeon: fix alignment of UVD fence
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Sun, 14 Apr 2013 10:45:43 +0000 (12:45 +0200)]
drm/radeon: cleanup UVD address checks
Message and feedback buffers must be at start of
VRAM, not at start of address space.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 10 Apr 2013 23:08:14 +0000 (19:08 -0400)]
drm/radeon: disable the crtcs in mc_stop (evergreen+) (v2)
Just disabling the mem requests should be enough, but
that doesn't seem to work correctly on efi systems.
May fix:
https://bugs.freedesktop.org/show_bug.cgi?id=57567
https://bugs.freedesktop.org/show_bug.cgi?id=43655
https://bugzilla.kernel.org/show_bug.cgi?id=56441
v2: blank displays first, then disable.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Wed, 17 Apr 2013 13:35:39 +0000 (09:35 -0400)]
drm/radeon: disable the crtcs in mc_stop (r5xx-r7xx) (v2)
Just disabling the mem requests should be enough, but
that doesn't seem to work correctly on efi systems.
v2: blank displays first, then disable.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Wed, 10 Apr 2013 13:58:42 +0000 (09:58 -0400)]
drm/radeon: properly lock disp in mc_stop/resume for evergreen+
Need to wait for the new addresses to take affect before
re-enabling the MC.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Wed, 10 Apr 2013 13:47:05 +0000 (09:47 -0400)]
drm/radeon: properly lock disp in mc_stop/resume for r5xx-r7xx
Need to wait for the new addresses to take affect before
re-enabling the MC.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Tue, 9 Apr 2013 22:49:59 +0000 (18:49 -0400)]
drm/radeon: update wait_for_vblank for evergreen+
Properly wait for the next vblank region. The previous
code didn't always wait long enough depending on the timing.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Tue, 9 Apr 2013 22:41:15 +0000 (18:41 -0400)]
drm/radeon: update wait_for_vblank for r5xx-r7xx
Properly wait for the next vblank region. The previous
code didn't always wait long enough depending on the timing.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Tue, 9 Apr 2013 22:32:01 +0000 (18:32 -0400)]
drm/radeon: update wait_for_vblank for r1xx-r4xx
Properly wait for the next vblank region. The previous
code didn't always wait long enough depending on the timing.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Dave Airlie [Mon, 22 Apr 2013 10:49:07 +0000 (20:49 +1000)]
Merge tag 'drm/tegra/for-3.10' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v3.10-rc1
The bulk of this pull-request is the host1x series that has been in the
works for a few months. The current implementation looks good and has
been tested by several independent parties. So far no issues have been
found. To be on the safe side, the new Tegra-specific DRM IOCTLs depend
on staging in order to give some amount of flexibility to change them
just in case. The plan is to remove that dependency once more userspace
exists to verify the adequacy of the IOCTLs.
Currently only the 2D engine is supported, but patches are in the works
to enable 3D support on top of this framework as well. Various bits of
open-source userspace exist to test the 2D and 3D support[0]. This is
still a bit immature but it allows to verify that the kernel interfaces
work properly.
To round things off there are two smaller cleanup patches, one of them
adding a new pixel format and the other removing a redundent Kconfig
dependency.
[0]: https://github.com/grate-driver
* tag 'drm/tegra/for-3.10' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: don't depend on OF
drm/tegra: Support the XBGR8888 pixelformat
drm/tegra: Add gr2d device
gpu: host1x: drm: Add memory manager and fb
gpu: host1x: Remove second host1x driver
gpu: host1x: drm: Rename host1x to host1x_drm
drm/tegra: Move drm to live under host1x
gpu: host1x: Add debug support
gpu: host1x: Add channel support
gpu: host1x: Add syncpoint wait and interrupts
gpu: host1x: Add host1x driver
Stephen Warren [Mon, 11 Mar 2013 22:33:02 +0000 (16:33 -0600)]
drm/tegra: don't depend on OF
ARCH_TEGRA always enabled OF, so there's no need for any driver to
depend on it.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Thierry Reding [Fri, 22 Mar 2013 14:37:30 +0000 (15:37 +0100)]
drm/tegra: Support the XBGR8888 pixelformat
While at it, also include the RGB565 pixelformat in the list of formats
supported by overlays.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Terje Bergstrom [Fri, 22 Mar 2013 14:34:09 +0000 (16:34 +0200)]
drm/tegra: Add gr2d device
Add client driver for 2D device, and IOCTLs to pass work to host1x
channel for 2D.
Also adds functions that can be called to access sync points from
DRM.
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Arto Merilainen [Fri, 22 Mar 2013 14:34:08 +0000 (16:34 +0200)]
gpu: host1x: drm: Add memory manager and fb
This patch introduces a memory manager for tegra drm and moves
existing parts to use it. As cma framebuffer helpers can no more
be used, this patch adds also a separate framebuffer driver for
tegra.
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Terje Bergstrom [Fri, 22 Mar 2013 14:34:07 +0000 (16:34 +0200)]
gpu: host1x: Remove second host1x driver
Remove second host1x driver, and bind tegra-drm to the new host1x
driver. The logic to parse device tree and track clients is moved
to drm.c.
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Arto Merilainen [Fri, 22 Mar 2013 14:34:06 +0000 (16:34 +0200)]
gpu: host1x: drm: Rename host1x to host1x_drm
Both host1x and drm drivers have host1x structures. This patch
renames the host1x structure under drm to follow name host1x_drm.
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Terje Bergstrom [Fri, 22 Mar 2013 14:34:05 +0000 (16:34 +0200)]
drm/tegra: Move drm to live under host1x
Make drm part of host1x driver.
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Terje Bergstrom [Fri, 22 Mar 2013 14:34:04 +0000 (16:34 +0200)]
gpu: host1x: Add debug support
Add support for host1x debugging. Adds debugfs entries, and dumps
channel state to UART in case of stuck job.
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Terje Bergstrom [Fri, 22 Mar 2013 14:34:03 +0000 (16:34 +0200)]
gpu: host1x: Add channel support
Add support for host1x client modules, and host1x channels to submit
work to the clients.
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Terje Bergstrom [Fri, 22 Mar 2013 14:34:02 +0000 (16:34 +0200)]
gpu: host1x: Add syncpoint wait and interrupts
Add support for sync point interrupts, and sync point wait. Sync
point wait used interrupts for unblocking wait.
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Terje Bergstrom [Fri, 22 Mar 2013 14:34:01 +0000 (16:34 +0200)]
gpu: host1x: Add host1x driver
Add host1x, the driver for host1x and its client unit 2D. The Tegra
host1x module is the DMA engine for register access to Tegra's
graphics- and multimedia-related modules. The modules served by
host1x are referred to as clients. host1x includes some other
functionality, such as synchronization.
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
projects / openwrt / staging / blogic.git / log